1983 files changed, 116401 insertions, 178232 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 3ea332b009e5..364c6dadde0a 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -27,15 +27,65 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config HAVE_EFFICIENT_UNALIGNED_ACCESS
+	def_bool n
+	help
+	  Some architectures are unable to perform unaligned accesses
+	  without the use of get_unaligned/put_unaligned. Others are
+	  unable to perform such accesses efficiently (e.g. trap on
+	  unaligned access and require fixing it up in the exception
+	  handler.)
+
+	  This symbol should be selected by an architecture if it can
+	  perform unaligned accesses efficiently to allow different
+	  code paths to be selected for these cases. Some network
+	  drivers, for example, could opt to not fix up alignment
+	  problems with received packets if doing so would not help
+	  much.
+
+	  See Documentation/unaligned-memory-access.txt for more
+	  information on the topic of unaligned memory accesses.
+
 config KRETPROBES
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
 
+config HAVE_IOREMAP_PROT
+	def_bool n
+
 config HAVE_KPROBES
 	def_bool n
 
 config HAVE_KRETPROBES
 	def_bool n
 
+#
+# An arch should select this if it provides all these things:
+#
+#	task_pt_regs()		in asm/processor.h or asm/ptrace.h
+#	arch_has_single_step()	if there is hardware single-step support
+#	arch_has_block_step()	if there is hardware block-step support
+#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
+#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
+#	asm/syscall.h		supplying asm-generic/syscall.h interface
+#	linux/regset.h		user_regset interfaces
+#	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
+#	TIF_SYSCALL_TRACE	calls tracehook_report_syscall_{entry,exit}
+#	TIF_NOTIFY_RESUME	calls tracehook_notify_resume()
+#	signal delivery		calls tracehook_signal_handler()
+#
+config HAVE_ARCH_TRACEHOOK
+	def_bool n
+
 config HAVE_DMA_ATTRS
 	def_bool n
+
+config USE_GENERIC_SMP_HELPERS
+	def_bool n
+
+config HAVE_CLK
+	def_bool n
+	help
+	  The <linux/clk.h> calls support software clock gating and
+	  thus are a key power management tool on many systems.
+
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 729cdbdf8036..1bec55d63ef6 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -333,11 +333,6 @@ config PCI_SYSCALL
 config IOMMU_HELPER
 	def_bool PCI
 
-config ALPHA_CORE_AGP
-	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
-	default y
-
 config ALPHA_NONAME
 	bool
 	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
@@ -528,6 +523,7 @@ config ARCH_MAY_HAVE_PC_FDC
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
+	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index c00646b25f6e..3047a1b3a517 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -78,8 +78,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static char *input_data;
 static int  input_data_size;
@@ -88,51 +86,18 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
 static void gzip_mark(void **);
 static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
 #define HEAP_SIZE 0x3000
 
 #include "../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
  * and at least one byte is really needed.
@@ -193,7 +158,7 @@ decompress_kernel(void *output_start,
 
 	/* FIXME FIXME FIXME */
 	free_mem_ptr		= (ulg)output_start + ksize;
-	free_mem_ptr_end	= (ulg)output_start + ksize + 0x200000;
+	free_mem_end_ptr	= (ulg)output_start + ksize + 0x200000;
 	/* FIXME FIXME FIXME */
 
 	/* put in temp area to reduce initial footprint */
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index b04f1feb1dda..04dcc5e5d4c1 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -660,9 +660,9 @@ __marvel_rtc_io(u8 b, unsigned long addr, int write)
 
 #ifdef CONFIG_SMP
 		if (smp_processor_id() != boot_cpuid)
-			smp_call_function_on_cpu(__marvel_access_rtc,
-						 &rtc_access, 1, 1,
-						 cpumask_of_cpu(boot_cpuid));
+			smp_call_function_single(boot_cpuid,
+						 __marvel_access_rtc,
+						 &rtc_access, 1);
 		else
 			__marvel_access_rtc(&rtc_access);
 #else
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index facf82a5499a..c626a821cdcb 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -42,8 +42,7 @@ void ack_bad_irq(unsigned int irq)
 #ifdef CONFIG_SMP 
 static char irq_user_affinity[NR_IRQS];
 
-int
-select_smp_affinity(unsigned int irq)
+int irq_select_affinity(unsigned int irq)
 {
 	static int last_cpu;
 	int cpu = last_cpu + 1;
@@ -51,7 +50,7 @@ select_smp_affinity(unsigned int irq)
 	if (!irq_desc[irq].chip->set_affinity || irq_user_affinity[irq])
 		return 1;
 
-	while (!cpu_possible(cpu))
+	while (!cpu_possible(cpu) || !cpu_isset(cpu, irq_default_affinity))
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 96ed82fd9eef..351407e07e71 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -160,7 +160,7 @@ common_shutdown(int mode, char *restart_cmd)
 	struct halt_info args;
 	args.mode = mode;
 	args.restart_cmd = restart_cmd;
-	on_each_cpu(common_shutdown_1, &args, 1, 0);
+	on_each_cpu(common_shutdown_1, &args, 0);
 }
 
 void
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 2525692db0ab..83df541650fc 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -62,6 +62,7 @@ static struct {
 enum ipi_message_type {
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
+	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP,
 };
 
@@ -558,51 +559,6 @@ send_ipi_message(cpumask_t to_whom, enum ipi_message_type operation)
 		wripir(i);
 }
 
-/* Structure and data for smp_call_function.  This is designed to 
-   minimize static memory requirements.  Plus it looks cleaner.  */
-
-struct smp_call_struct {
-	void (*func) (void *info);
-	void *info;
-	long wait;
-	atomic_t unstarted_count;
-	atomic_t unfinished_count;
-};
-
-static struct smp_call_struct *smp_call_function_data;
-
-/* Atomicly drop data into a shared pointer.  The pointer is free if
-   it is initially locked.  If retry, spin until free.  */
-
-static int
-pointer_lock (void *lock, void *data, int retry)
-{
-	void *old, *tmp;
-
-	mb();
- again:
-	/* Compare and swap with zero.  */
-	asm volatile (
-	"1:	ldq_l	%0,%1\n"
-	"	mov	%3,%2\n"
-	"	bne	%0,2f\n"
-	"	stq_c	%2,%1\n"
-	"	beq	%2,1b\n"
-	"2:"
-	: "=&r"(old), "=m"(*(void **)lock), "=&r"(tmp)
-	: "r"(data)
-	: "memory");
-
-	if (old == 0)
-		return 0;
-	if (! retry)
-		return -EBUSY;
-
-	while (*(void **)lock)
-		barrier();
-	goto again;
-}
-
 void
 handle_ipi(struct pt_regs *regs)
 {
@@ -632,31 +588,12 @@ handle_ipi(struct pt_regs *regs)
 			break;
 
 		case IPI_CALL_FUNC:
-		    {
-			struct smp_call_struct *data;
-			void (*func)(void *info);
-			void *info;
-			int wait;
-
-			data = smp_call_function_data;
-			func = data->func;
-			info = data->info;
-			wait = data->wait;
-
-			/* Notify the sending CPU that the data has been
-			   received, and execution is about to begin.  */
-			mb();
-			atomic_dec (&data->unstarted_count);
-
-			/* At this point the structure may be gone unless
-			   wait is true.  */
-			(*func)(info);
-
-			/* Notify the sending CPU that the task is done.  */
-			mb();
-			if (wait) atomic_dec (&data->unfinished_count);
+			generic_smp_call_function_interrupt();
+			break;
+
+		case IPI_CALL_FUNC_SINGLE:
+			generic_smp_call_function_single_interrupt();
 			break;
-		    }
 
 		case IPI_CPU_STOP:
 			halt();
@@ -700,102 +637,15 @@ smp_send_stop(void)
 	send_ipi_message(to_whom, IPI_CPU_STOP);
 }
 
-/*
- * Run a function on all other CPUs.
- *  <func>	The function to run. This must be fast and non-blocking.
- *  <info>	An arbitrary pointer to pass to the function.
- *  <retry>	If true, keep retrying until ready.
- *  <wait>	If true, wait until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until remote CPUs are nearly ready to execute <func>
- * or are or have executed.
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-
-int
-smp_call_function_on_cpu (void (*func) (void *info), void *info, int retry,
-			  int wait, cpumask_t to_whom)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct smp_call_struct data;
-	unsigned long timeout;
-	int num_cpus_to_call;
-	
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	data.wait = wait;
-
-	cpu_clear(smp_processor_id(), to_whom);
-	num_cpus_to_call = cpus_weight(to_whom);
-
-	atomic_set(&data.unstarted_count, num_cpus_to_call);
-	atomic_set(&data.unfinished_count, num_cpus_to_call);
-
-	/* Acquire the smp_call_function_data mutex.  */
-	if (pointer_lock(&smp_call_function_data, &data, retry))
-		return -EBUSY;
-
-	/* Send a message to the requested CPUs.  */
-	send_ipi_message(to_whom, IPI_CALL_FUNC);
-
-	/* Wait for a minimal response.  */
-	timeout = jiffies + HZ;
-	while (atomic_read (&data.unstarted_count) > 0
-	       && time_before (jiffies, timeout))
-		barrier();
-
-	/* If there's no response yet, log a message but allow a longer
-	 * timeout period -- if we get a response this time, log
-	 * a message saying when we got it.. 
-	 */
-	if (atomic_read(&data.unstarted_count) > 0) {
-		long start_time = jiffies;
-		printk(KERN_ERR "%s: initial timeout -- trying long wait\n",
-		       __func__);
-		timeout = jiffies + 30 * HZ;
-		while (atomic_read(&data.unstarted_count) > 0
-		       && time_before(jiffies, timeout))
-			barrier();
-		if (atomic_read(&data.unstarted_count) <= 0) {
-			long delta = jiffies - start_time;
-			printk(KERN_ERR 
-			       "%s: response %ld.%ld seconds into long wait\n",
-			       __func__, delta / HZ,
-			       (100 * (delta - ((delta / HZ) * HZ))) / HZ);
-		}
-	}
-
-	/* We either got one or timed out -- clear the lock. */
-	mb();
-	smp_call_function_data = NULL;
-
-	/* 
-	 * If after both the initial and long timeout periods we still don't
-	 * have a response, something is very wrong...
-	 */
-	BUG_ON(atomic_read (&data.unstarted_count) > 0);
-
-	/* Wait for a complete response, if needed.  */
-	if (wait) {
-		while (atomic_read (&data.unfinished_count) > 0)
-			barrier();
-	}
-
-	return 0;
+	send_ipi_message(mask, IPI_CALL_FUNC);
 }
-EXPORT_SYMBOL(smp_call_function_on_cpu);
 
-int
-smp_call_function (void (*func) (void *info), void *info, int retry, int wait)
+void arch_send_call_function_single_ipi(int cpu)
 {
-	return smp_call_function_on_cpu (func, info, retry, wait,
-					 cpu_online_map);
+	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
 }
-EXPORT_SYMBOL(smp_call_function);
 
 static void
 ipi_imb(void *ignored)
@@ -807,7 +657,7 @@ void
 smp_imb(void)
 {
 	/* Must wait other processors to flush their icache before continue. */
-	if (on_each_cpu(ipi_imb, NULL, 1, 1))
+	if (on_each_cpu(ipi_imb, NULL, 1))
 		printk(KERN_CRIT "smp_imb: timed out\n");
 }
 EXPORT_SYMBOL(smp_imb);
@@ -823,7 +673,7 @@ flush_tlb_all(void)
 {
 	/* Although we don't have any data to pass, we do want to
 	   synchronize with the other processors.  */
-	if (on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1)) {
+	if (on_each_cpu(ipi_flush_tlb_all, NULL, 1)) {
 		printk(KERN_CRIT "flush_tlb_all: timed out\n");
 	}
 }
@@ -860,7 +710,7 @@ flush_tlb_mm(struct mm_struct *mm)
 		}
 	}
 
-	if (smp_call_function(ipi_flush_tlb_mm, mm, 1, 1)) {
+	if (smp_call_function(ipi_flush_tlb_mm, mm, 1)) {
 		printk(KERN_CRIT "flush_tlb_mm: timed out\n");
 	}
 
@@ -913,7 +763,7 @@ flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 	data.mm = mm;
 	data.addr = addr;
 
-	if (smp_call_function(ipi_flush_tlb_page, &data, 1, 1)) {
+	if (smp_call_function(ipi_flush_tlb_page, &data, 1)) {
 		printk(KERN_CRIT "flush_tlb_page: timed out\n");
 	}
 
@@ -965,7 +815,7 @@ flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 		}
 	}
 
-	if (smp_call_function(ipi_flush_icache_page, mm, 1, 1)) {
+	if (smp_call_function(ipi_flush_icache_page, mm, 1)) {
 		printk(KERN_CRIT "flush_icache_page: timed out\n");
 	}
 
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 40c15e7301de..234e42b8ee74 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -94,36 +94,6 @@ __bad_page(void)
 	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
 }
 
-#ifndef CONFIG_DISCONTIGMEM
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
-#endif
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 10ab7833e83c..a13de49d1265 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -19,7 +19,6 @@
 #include <asm/pgalloc.h>
 
 pg_data_t node_data[MAX_NUMNODES];
-bootmem_data_t node_bdata[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
 
 #undef DEBUG_DISCONTIG
@@ -141,7 +140,7 @@ setup_memory_node(int nid, void *kernel_end)
 		printk(" not enough mem to reserve NODE_DATA");
 		return;
 	}
-	NODE_DATA(nid)->bdata = &node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 
 	printk(" Detected node memory:   start %8lu, end %8lu\n",
 	       node_min_pfn, node_max_pfn);
@@ -304,8 +303,9 @@ void __init paging_init(void)
 	dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
 	for_each_online_node(nid) {
-		unsigned long start_pfn = node_bdata[nid].node_boot_start >> PAGE_SHIFT;
-		unsigned long end_pfn = node_bdata[nid].node_low_pfn;
+		bootmem_data_t *bdata = &bootmem_node_data[nid];
+		unsigned long start_pfn = bdata->node_min_pfn;
+		unsigned long end_pfn = bdata->node_low_pfn;
 
 		if (dma_local_pfn >= end_pfn - start_pfn)
 			zones_size[ZONE_DMA] = end_pfn - start_pfn;
@@ -313,7 +313,7 @@ void __init paging_init(void)
 			zones_size[ZONE_DMA] = dma_local_pfn;
 			zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn;
 		}
-		free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, NULL);
+		free_area_init_node(nid, zones_size, start_pfn, NULL);
 	}
 
 	/* Initialize the kernel's ZERO_PGE. */
@@ -359,38 +359,3 @@ void __init mem_init(void)
 	mem_stress();
 #endif
 }
-
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-	int nid;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_node(nid) {
-		unsigned long flags;
-		pgdat_resize_lock(NODE_DATA(nid), &flags);
-		i = node_spanned_pages(nid);
-		while (i-- > 0) {
-			struct page *page = nid_page_nr(nid, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(NODE_DATA(nid), &flags);
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
index 9fc0eeb4f0ab..7c3d5ec6ec67 100644
--- a/arch/alpha/oprofile/common.c
+++ b/arch/alpha/oprofile/common.c
@@ -65,7 +65,7 @@ op_axp_setup(void)
 	model->reg_setup(&reg, ctr, &sys);
 
 	/* Configure the registers on all cpus.  */
-	(void)smp_call_function(model->cpu_setup, &reg, 0, 1);
+	(void)smp_call_function(model->cpu_setup, &reg, 1);
 	model->cpu_setup(&reg);
 	return 0;
 }
@@ -86,7 +86,7 @@ op_axp_cpu_start(void *dummy)
 static int
 op_axp_start(void)
 {
-	(void)smp_call_function(op_axp_cpu_start, NULL, 0, 1);
+	(void)smp_call_function(op_axp_cpu_start, NULL, 1);
 	op_axp_cpu_start(NULL);
 	return 0;
 }
@@ -101,7 +101,7 @@ op_axp_cpu_stop(void *dummy)
 static void
 op_axp_stop(void)
 {
-	(void)smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
+	(void)smp_call_function(op_axp_cpu_stop, NULL, 1);
 	op_axp_cpu_stop(NULL);
 }
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b786e68914d4..dabb015aa40b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,8 +12,11 @@ config ARM
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
+	select HAVE_FTRACE if (!XIP_KERNEL)
+	select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -22,6 +25,9 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
+config HAVE_PWM
+	bool
+
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
@@ -84,6 +90,11 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	bool
+	depends on !SMP
+	default y
+
 config LOCKDEP_SUPPORT
 	bool
 	default y
@@ -147,6 +158,10 @@ config FIQ
 config ARCH_MTD_XIP
 	bool
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	bool
+	def_bool y
+
 if OPROFILE
 
 config OPROFILE_ARMV6
@@ -183,12 +198,14 @@ choice
 config ARCH_AAEC2000
 	bool "Agilent AAEC-2000 based"
 	select ARM_AMBA
+	select HAVE_CLK
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select HAVE_CLK
 	select ICST525
 	help
 	  Support for ARM's Integrator platform.
@@ -196,6 +213,7 @@ config ARCH_INTEGRATOR
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
+	select HAVE_CLK
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -206,6 +224,7 @@ config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
 	select ARM_AMBA
 	select ARM_VIC
+	select HAVE_CLK
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -232,13 +251,6 @@ config ARCH_CLPS711X
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
-config ARCH_CO285
-	bool "Co-EBSA285"
-	select FOOTBRIDGE
-	select FOOTBRIDGE_ADDIN
-	help
-	  Support for Intel's EBSA285 companion chip.
-
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select ISA
@@ -254,7 +266,9 @@ config ARCH_EP93XX
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select HAVE_CLK
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -299,6 +313,8 @@ config ARCH_IOP32X
 	depends on MMU
 	select PLAT_IOP
 	select PCI
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -308,6 +324,8 @@ config ARCH_IOP33X
 	depends on MMU
 	select PLAT_IOP
 	select PCI
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -347,6 +365,16 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_KIRKWOOD
+	bool "Marvell Kirkwood"
+	select PCI
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the following Marvell Kirkwood series SoCs:
+	  88F6180, 88F6192 and 88F6281.
+
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
 	select GENERIC_GPIO
@@ -359,15 +387,38 @@ config ARCH_NS9XXX
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	help
 	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
 	  System.
 
 	  <http://www.digi.com/products/microprocessors/index.jsp>
 
+config ARCH_LOKI
+	bool "Marvell Loki (88RC8480)"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the Marvell Loki (88RC8480) SoC.
+
+config ARCH_MV78XX0
+	bool "Marvell MV78xx0"
+	select PCI
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the following Marvell MV78xx0 series SoCs:
+	  MV781x0, MV782x0.
+
 config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	select ARCH_MTD_XIP
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -381,10 +432,12 @@ config ARCH_ORION5X
 	select PLAT_ORION
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
+	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+	  Orion-2 (5281).
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
+	select HAVE_CLK
 	help
 	  This enables support for Philips PNX4008 mobile platform.
 
@@ -393,7 +446,8 @@ config ARCH_PXA
 	depends on MMU
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -406,6 +460,7 @@ config ARCH_RPC
 	select FIQ
 	select TIMER_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
+	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select NO_IOPORT
 	help
@@ -422,14 +477,16 @@ config ARCH_SA1100
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	select TICK_ONESHOT
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -457,13 +514,15 @@ config ARCH_DAVINCI
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  Support for TI's DaVinci platform.
 
 config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -502,6 +561,10 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-loki/Kconfig"
+
+source "arch/arm/mach-mv78xx0/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
@@ -514,6 +577,8 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
@@ -650,6 +715,7 @@ source "kernel/time/Kconfig"
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -703,27 +769,6 @@ config PREEMPT
 	  Say Y here if you are building a kernel for a desktop, embedded
 	  or real-time system.  Say N if you are unsure.
 
-config NO_IDLE_HZ
-	bool "Dynamic tick timer"
-	depends on !GENERIC_CLOCKEVENTS
-	help
-	  Select this option if you want to disable continuous timer ticks
-	  and have them programmed to occur as required. This option saves
-	  power as the system can remain in idle state for longer.
-
-	  By default dynamic tick is disabled during the boot, and can be
-	  manually enabled with:
-
-	    echo 1 > /sys/devices/system/timer/timer0/dyn_tick
-
-	  Alternatively, if you want dynamic tick automatically enabled
-	  during boot, pass "dyntick=enable" via the kernel command string.
-
-	  Please note that dynamic tick may affect the accuracy of
-	  timekeeping on some platforms depending on the implementation.
-	  Currently at least OMAP, PXA2xx and SA11x0 platforms are known
-	  to have accurate timekeeping with dynamic tick.
-
 config HZ
 	int
 	default 128 if ARCH_L7200
@@ -789,7 +834,7 @@ source "mm/Kconfig"
 
 config LEDS
 	bool "Timer and CPU usage LEDs"
-	depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
+	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
 		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e72db27e0ba0..b20995a82e04 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -100,8 +100,6 @@ textofs-y	:= 0x00008000
   incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
   incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
- machine-$(CONFIG_ARCH_CO285)	   := footbridge
-  incdir-$(CONFIG_ARCH_CO285)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -135,11 +133,15 @@ endif
  machine-$(CONFIG_ARCH_NETX)	   := netx
  machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
+ machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
   incdir-$(CONFIG_ARCH_MXC)	   := mxc
+ machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
+ machine-$(CONFIG_ARCH_LOKI)       := loki
+ machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -190,8 +192,6 @@ core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 core-$(CONFIG_ARCH_MXC)		+= arch/arm/plat-mxc/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
-drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/
-drivers-$(CONFIG_ARCH_L7200)	+= drivers/acorn/char/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index de9d9ee50958..95baac4939e0 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -69,6 +69,12 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 
 targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
 		 head.o misc.o $(OBJS)
+
+ifeq ($(CONFIG_FTRACE),y)
+ORIG_CFLAGS := $(KBUILD_CFLAGS)
+KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
+endif
+
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  :=
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 3c2c8f2a1dc4..de41daeab5e9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -623,8 +623,8 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		b	__armv4_mmu_cache_flush
 
-		.word	0x56055310		@ Feroceon
-		.word	0xfffffff0
+		.word	0x56050000		@ Feroceon
+		.word	0xff0f0000
 		b	__armv4_mmu_cache_on
 		b	__armv4_mmu_cache_off
 		b	__armv5tej_mmu_cache_flush
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 9b444022cb9b..7145cc7c04f0 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -217,8 +217,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern char input_data_end[];
@@ -227,64 +225,21 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void putstr(const char *);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
-#define HEAP_SIZE 0x3000
-
-#include "../../../../lib/inflate.c"
-
-#ifndef STANDALONE_DEBUG
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	arch_decomp_wdog();
-	*ptr = (void *) free_mem_ptr;
-}
+#ifdef STANDALONE_DEBUG
+#define NO_INFLATE_MALLOC
+#endif
 
-static void gzip_release(void **ptr)
-{
-	arch_decomp_wdog();
-	free_mem_ptr = (long) *ptr;
-}
-#else
-static void gzip_mark(void **ptr)
-{
-}
+#define ARCH_HAS_DECOMP_WDOG
 
-static void gzip_release(void **ptr)
-{
-}
-#endif
+#include "../../../../lib/inflate.c"
 
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
@@ -348,7 +303,7 @@ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
 {
 	output_data		= (uch *)output_start;	/* Points to kernel start */
 	free_mem_ptr		= free_mem_ptr_p;
-	free_mem_ptr_end	= free_mem_ptr_end_p;
+	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
 	arch_decomp_setup();
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 3d0b9fa42f84..325e4b6a6afb 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -2,7 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-y				+= rtctime.o
 obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ARM_VIC)		+= vic.o
 obj-$(CONFIG_ICST525)		+= icst525.o
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2744673314b4..69130f365904 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	/*
 	 * Trying to unmap an invalid mapping
 	 */
-	if (dma_mapping_error(dma_addr)) {
+	if (dma_mapping_error(dev, dma_addr)) {
 		dev_err(dev, "Trying to unmap invalid mapping\n");
 		return;
 	}
@@ -554,9 +554,8 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
 	device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
 	if (!device_info) {
-		printk(KERN_ERR
-			"Could not allocated dmabounce_device_info for %s",
-			dev->bus_id);
+		dev_err(dev,
+			"Could not allocated dmabounce_device_info\n");
 		return -ENOMEM;
 	}
 
@@ -594,8 +593,7 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
 	dev->archdata.dmabounce = device_info;
 
-	printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
-		dev->bus_id, dev->bus->name);
+	dev_info(dev, "dmabounce: registered device\n");
 
 	return 0;
 
@@ -614,16 +612,15 @@ dmabounce_unregister_dev(struct device *dev)
 	dev->archdata.dmabounce = NULL;
 
 	if (!device_info) {
-		printk(KERN_WARNING
-			"%s: Never registered with dmabounce but attempting" \
-			"to unregister!\n", dev->bus_id);
+		dev_warn(dev,
+			 "Never registered with dmabounce but attempting"
+			 "to unregister!\n");
 		return;
 	}
 
 	if (!list_empty(&device_info->safe_buffers)) {
-		printk(KERN_ERR
-			"%s: Removing from dmabounce with pending buffers!\n",
-			dev->bus_id);
+		dev_err(dev,
+			"Removing from dmabounce with pending buffers!\n");
 		BUG();
 	}
 
@@ -639,8 +636,7 @@ dmabounce_unregister_dev(struct device *dev)
 
 	kfree(device_info);
 
-	printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
-		dev->bus_id, dev->bus->name);
+	dev_info(dev, "dmabounce: device unregistered\n");
 }
 
 
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index d973c986f721..c3c3a3339049 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -543,7 +543,6 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		goto out;
 	}
 
-	strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
 	/*
 	 * If the parent device has a DMA mask associated with it,
 	 * propagate it down to the children.
@@ -553,6 +552,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		dev->dev.dma_mask = &dev->dma_mask;
 	}
 
+	dev_set_name(&dev->dev, "%s", info->name);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = lchip->dev;
 	dev->dev.bus     = &locomo_bus_type;
diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c
deleted file mode 100644
index aa8f7739c822..000000000000
--- a/arch/arm/common/rtctime.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- *  linux/arch/arm/common/rtctime.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions Ltd.
- *  Based on sa1100-rtc.c, Nils Faerber, CIH, Nicolas Pitre.
- *  Based on rtc.c by Paul Gortmaker
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/miscdevice.h>
-#include <linux/spinlock.h>
-#include <linux/capability.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-
-#include <asm/rtc.h>
-
-static DECLARE_WAIT_QUEUE_HEAD(rtc_wait);
-static struct fasync_struct *rtc_async_queue;
-
-/*
- * rtc_lock protects rtc_irq_data
- */
-static DEFINE_SPINLOCK(rtc_lock);
-static unsigned long rtc_irq_data;
-
-/*
- * rtc_sem protects rtc_inuse and rtc_ops
- */
-static DEFINE_MUTEX(rtc_mutex);
-static unsigned long rtc_inuse;
-static struct rtc_ops *rtc_ops;
-
-#define rtc_epoch 1900UL
-
-/*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
- */
-void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
-{
-	unsigned long next_time;
-	unsigned long now_time;
-
-	next->tm_year = now->tm_year;
-	next->tm_mon = now->tm_mon;
-	next->tm_mday = now->tm_mday;
-	next->tm_hour = alrm->tm_hour;
-	next->tm_min = alrm->tm_min;
-	next->tm_sec = alrm->tm_sec;
-
-	rtc_tm_to_time(now, &now_time);
-	rtc_tm_to_time(next, &next_time);
-
-	if (next_time < now_time) {
-		/* Advance one day */
-		next_time += 60 * 60 * 24;
-		rtc_time_to_tm(next_time, next);
-	}
-}
-EXPORT_SYMBOL(rtc_next_alarm_time);
-
-static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
-{
-	memset(tm, 0, sizeof(struct rtc_time));
-	return ops->read_time(tm);
-}
-
-static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
-{
-	int ret;
-
-	ret = rtc_valid_tm(tm);
-	if (ret == 0)
-		ret = ops->set_time(tm);
-
-	return ret;
-}
-
-static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-{
-	int ret = -EINVAL;
-	if (ops->read_alarm) {
-		memset(alrm, 0, sizeof(struct rtc_wkalrm));
-		ret = ops->read_alarm(alrm);
-	}
-	return ret;
-}
-
-static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-{
-	int ret = -EINVAL;
-	if (ops->set_alarm)
-		ret = ops->set_alarm(alrm);
-	return ret;
-}
-
-void rtc_update(unsigned long num, unsigned long events)
-{
-	spin_lock(&rtc_lock);
-	rtc_irq_data = (rtc_irq_data + (num << 8)) | events;
-	spin_unlock(&rtc_lock);
-
-	wake_up_interruptible(&rtc_wait);
-	kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
-}
-EXPORT_SYMBOL(rtc_update);
-
-
-static ssize_t
-rtc_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long data;
-	ssize_t ret;
-
-	if (count < sizeof(unsigned long))
-		return -EINVAL;
-
-	add_wait_queue(&rtc_wait, &wait);
-	do {
-		__set_current_state(TASK_INTERRUPTIBLE);
-
-		spin_lock_irq(&rtc_lock);
-		data = rtc_irq_data;
-		rtc_irq_data = 0;
-		spin_unlock_irq(&rtc_lock);
-
-		if (data != 0) {
-			ret = 0;
-			break;
-		}
-		if (file->f_flags & O_NONBLOCK) {
-			ret = -EAGAIN;
-			break;
-		}
-		if (signal_pending(current)) {
-			ret = -ERESTARTSYS;
-			break;
-		}
-		schedule();
-	} while (1);
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&rtc_wait, &wait);
-
-	if (ret == 0) {
-		ret = put_user(data, (unsigned long __user *)buf);
-		if (ret == 0)
-			ret = sizeof(unsigned long);
-	}
-	return ret;
-}
-
-static unsigned int rtc_poll(struct file *file, poll_table *wait)
-{
-	unsigned long data;
-
-	poll_wait(file, &rtc_wait, wait);
-
-	spin_lock_irq(&rtc_lock);
-	data = rtc_irq_data;
-	spin_unlock_irq(&rtc_lock);
-
-	return data != 0 ? POLLIN | POLLRDNORM : 0;
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
-{
-	struct rtc_ops *ops = file->private_data;
-	struct rtc_time tm;
-	struct rtc_wkalrm alrm;
-	void __user *uarg = (void __user *)arg;
-	int ret = -EINVAL;
-
-	switch (cmd) {
-	case RTC_ALM_READ:
-		ret = rtc_arm_read_alarm(ops, &alrm);
-		if (ret)
-			break;
-		ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
-		if (ret)
-			ret = -EFAULT;
-		break;
-
-	case RTC_ALM_SET:
-		ret = copy_from_user(&alrm.time, uarg, sizeof(tm));
-		if (ret) {
-			ret = -EFAULT;
-			break;
-		}
-		alrm.enabled = 0;
-		alrm.pending = 0;
-		alrm.time.tm_mday = -1;
-		alrm.time.tm_mon = -1;
-		alrm.time.tm_year = -1;
-		alrm.time.tm_wday = -1;
-		alrm.time.tm_yday = -1;
-		alrm.time.tm_isdst = -1;
-		ret = rtc_arm_set_alarm(ops, &alrm);
-		break;
-
-	case RTC_RD_TIME:
-		ret = rtc_arm_read_time(ops, &tm);
-		if (ret)
-			break;
-		ret = copy_to_user(uarg, &tm, sizeof(tm));
-		if (ret)
-			ret = -EFAULT;
-		break;
-
-	case RTC_SET_TIME:
-		if (!capable(CAP_SYS_TIME)) {
-			ret = -EACCES;
-			break;
-		}
-		ret = copy_from_user(&tm, uarg, sizeof(tm));
-		if (ret) {
-			ret = -EFAULT;
-			break;
-		}
-		ret = rtc_arm_set_time(ops, &tm);
-		break;
-
-	case RTC_EPOCH_SET:
-#ifndef rtc_epoch
-		/*
-		 * There were no RTC clocks before 1900.
-		 */
-		if (arg < 1900) {
-			ret = -EINVAL;
-			break;
-		}
-		if (!capable(CAP_SYS_TIME)) {
-			ret = -EACCES;
-			break;
-		}
-		rtc_epoch = arg;
-		ret = 0;
-#endif
-		break;
-
-	case RTC_EPOCH_READ:
-		ret = put_user(rtc_epoch, (unsigned long __user *)uarg);
-		break;
-
-	case RTC_WKALM_SET:
-		ret = copy_from_user(&alrm, uarg, sizeof(alrm));
-		if (ret) {
-			ret = -EFAULT;
-			break;
-		}
-		ret = rtc_arm_set_alarm(ops, &alrm);
-		break;
-
-	case RTC_WKALM_RD:
-		ret = rtc_arm_read_alarm(ops, &alrm);
-		if (ret)
-			break;
-		ret = copy_to_user(uarg, &alrm, sizeof(alrm));
-		if (ret)
-			ret = -EFAULT;
-		break;
-
-	default:
-		if (ops->ioctl)
-			ret = ops->ioctl(cmd, arg);
-		break;
-	}
-	return ret;
-}
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	int ret;
-
-	mutex_lock(&rtc_mutex);
-
-	if (rtc_inuse) {
-		ret = -EBUSY;
-	} else if (!rtc_ops || !try_module_get(rtc_ops->owner)) {
-		ret = -ENODEV;
-	} else {
-		file->private_data = rtc_ops;
-
-		ret = rtc_ops->open ? rtc_ops->open() : 0;
-		if (ret == 0) {
-			spin_lock_irq(&rtc_lock);
-			rtc_irq_data = 0;
-			spin_unlock_irq(&rtc_lock);
-
-			rtc_inuse = 1;
-		}
-	}
-	mutex_unlock(&rtc_mutex);
-
-	return ret;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-	struct rtc_ops *ops = file->private_data;
-
-	if (ops->release)
-		ops->release();
-
-	spin_lock_irq(&rtc_lock);
-	rtc_irq_data = 0;
-	spin_unlock_irq(&rtc_lock);
-
-	module_put(rtc_ops->owner);
-	rtc_inuse = 0;
-
-	return 0;
-}
-
-static int rtc_fasync(int fd, struct file *file, int on)
-{
-	return fasync_helper(fd, file, on, &rtc_async_queue);
-}
-
-static const struct file_operations rtc_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.read		= rtc_read,
-	.poll		= rtc_poll,
-	.ioctl		= rtc_ioctl,
-	.open		= rtc_open,
-	.release	= rtc_release,
-	.fasync		= rtc_fasync,
-};
-
-static struct miscdevice rtc_miscdev = {
-	.minor		= RTC_MINOR,
-	.name		= "rtc",
-	.fops		= &rtc_fops,
-};
-
-
-static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data)
-{
-	struct rtc_ops *ops = data;
-	struct rtc_wkalrm alrm;
-	struct rtc_time tm;
-	char *p = page;
-
-	if (rtc_arm_read_time(ops, &tm) == 0) {
-		p += sprintf(p,
-			"rtc_time\t: %02d:%02d:%02d\n"
-			"rtc_date\t: %04d-%02d-%02d\n"
-			"rtc_epoch\t: %04lu\n",
-			tm.tm_hour, tm.tm_min, tm.tm_sec,
-			tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
-			rtc_epoch);
-	}
-
-	if (rtc_arm_read_alarm(ops, &alrm) == 0) {
-		p += sprintf(p, "alrm_time\t: ");
-		if ((unsigned int)alrm.time.tm_hour <= 24)
-			p += sprintf(p, "%02d:", alrm.time.tm_hour);
-		else
-			p += sprintf(p, "**:");
-		if ((unsigned int)alrm.time.tm_min <= 59)
-			p += sprintf(p, "%02d:", alrm.time.tm_min);
-		else
-			p += sprintf(p, "**:");
-		if ((unsigned int)alrm.time.tm_sec <= 59)
-			p += sprintf(p, "%02d\n", alrm.time.tm_sec);
-		else
-			p += sprintf(p, "**\n");
-
-		p += sprintf(p, "alrm_date\t: ");
-		if ((unsigned int)alrm.time.tm_year <= 200)
-			p += sprintf(p, "%04d-", alrm.time.tm_year + 1900);
-		else
-			p += sprintf(p, "****-");
-		if ((unsigned int)alrm.time.tm_mon <= 11)
-			p += sprintf(p, "%02d-", alrm.time.tm_mon + 1);
-		else
-			p += sprintf(p, "**-");
-		if ((unsigned int)alrm.time.tm_mday <= 31)
-			p += sprintf(p, "%02d\n", alrm.time.tm_mday);
-		else
-			p += sprintf(p, "**\n");
-		p += sprintf(p, "alrm_wakeup\t: %s\n",
-			     alrm.enabled ? "yes" : "no");
-		p += sprintf(p, "alrm_pending\t: %s\n",
-			     alrm.pending ? "yes" : "no");
-	}
-
-	if (ops->proc)
-		p += ops->proc(p);
-
-	return p - page;
-}
-
-int register_rtc(struct rtc_ops *ops)
-{
-	int ret = -EBUSY;
-
-	mutex_lock(&rtc_mutex);
-	if (rtc_ops == NULL) {
-		rtc_ops = ops;
-
-		ret = misc_register(&rtc_miscdev);
-		if (ret == 0)
-			create_proc_read_entry("driver/rtc", 0, NULL,
-					       rtc_read_proc, ops);
-	}
-	mutex_unlock(&rtc_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(register_rtc);
-
-void unregister_rtc(struct rtc_ops *rtc)
-{
-	mutex_lock(&rtc_mutex);
-	if (rtc == rtc_ops) {
-		remove_proc_entry("driver/rtc", NULL);
-		misc_deregister(&rtc_miscdev);
-		rtc_ops = NULL;
-	}
-	mutex_unlock(&rtc_mutex);
-}
-EXPORT_SYMBOL(unregister_rtc);
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index eb06d0b2cb74..0a8e1ff2af8a 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -550,9 +550,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		goto out;
 	}
 
-	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
-		 "%4.4lx", info->offset);
-
+	dev_set_name(&dev->dev, "%4.4lx", info->offset);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = sachip->dev;
 	dev->dev.bus     = &sa1111_bus_type;
@@ -560,7 +558,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
 	dev->res.start   = sachip->phys + info->offset;
 	dev->res.end     = dev->res.start + 511;
-	dev->res.name    = dev->dev.bus_id;
+	dev->res.name    = dev_name(&dev->dev);
 	dev->res.flags   = IORESOURCE_MEM;
 	dev->mapbase     = sachip->base + info->offset;
 	dev->skpcr_mask  = info->skpcr_mask;
@@ -570,6 +568,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	if (ret) {
 		printk("SA1111: failed to allocate resource for %s\n",
 			dev->res.name);
+		dev_set_name(&dev->dev, NULL);
 		kfree(dev);
 		goto out;
 	}
@@ -593,7 +592,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		if (dev->dma_mask != 0xffffffffUL) {
 			ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
 			if (ret) {
-				printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id);
+				dev_err(&dev->dev, "SA1111: Failed to register"
+					" with dmabounce\n");
 				device_unregister(&dev->dev);
 			}
 		}
@@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (!sachip)
 		return -ENOMEM;
 
-	sachip->clk = clk_get(me, "GPIO27_CLK");
+	sachip->clk = clk_get(me, "SA1111_CLK");
 	if (!sachip->clk) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index bc299b07a6fa..ae39553589dd 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -247,7 +247,7 @@ static int __devinit scoop_probe(struct platform_device *pdev)
 	devptr->gpio.base = -1;
 
 	if (inf->gpio_base != 0) {
-		devptr->gpio.label = pdev->dev.bus_id;
+		devptr->gpio.label = dev_name(&pdev->dev);
 		devptr->gpio.base = inf->gpio_base;
 		devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
 		devptr->gpio.set = scoop_gpio_set;
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 5bba5255b119..8822b684d474 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -31,6 +31,7 @@
 #include <asm/irq.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
@@ -157,6 +158,7 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
 			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
 
+#ifdef CONFIG_BACKLIGHT_CORGI
 	/* If battery is low. limit backlight intensity to save power. */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
 			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
@@ -169,6 +171,7 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 		sharpsl_pm.machinfo->backlight_limit(0);
 		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
 	}
+#endif
 
 	/* Suspend if critical battery level */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index e32e73648129..be2b2f38fd94 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
@@ -907,7 +906,32 @@ CONFIG_USB_MON=y
 #
 # USB Gadget Support
 #
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -926,7 +950,59 @@ CONFIG_MMC_AT91=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
 
 #
 # File systems
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 2dbbbc3d4ac3..868fb7b9530b 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -169,7 +169,6 @@ CONFIG_AT91_CF=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 6e994f7820c6..de43fc675616 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -160,7 +160,6 @@ CONFIG_ISA_DMA_API=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index f659c938473f..2011adfa6758 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -220,7 +220,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 3802e85f7483..4049768962d2 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 32a0d74e0c89..fa1c5aecb5a8 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index 6bea0901bdf0..c06863847364 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Mon Jul  9 15:18:20 2007
+# Linux kernel version: 2.6.24
+# Tue Jun 10 15:51:52 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
@@ -22,45 +22,40 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-em-x270"
+CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
+# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
+# CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -71,42 +66,35 @@ CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
@@ -120,7 +108,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
@@ -139,8 +127,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
@@ -150,25 +139,60 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_OMAP is not set
 
 #
-# Intel PXA2xx Implementations
+# Boot options
+#
+
+#
+# Power management
 #
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_MACH_EM_X270=y
-CONFIG_PXA27x=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+CONFIG_MACH_AT91SAM9G20EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
+CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_ABRT_EV5TJ=y
 CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
@@ -176,28 +200,28 @@ CONFIG_CPU_CP15_MMU=y
 #
 # Processor Features
 #
-CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
 
 #
 # Bus support
 #
+# CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
 # CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
@@ -209,9 +233,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -219,7 +248,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -233,6 +262,7 @@ CONFIG_CMDLINE=""
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
 
 #
 # Userspace binary formats
@@ -245,10 +275,12 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM_EMULATION=m
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
 
 #
 # Networking
@@ -261,17 +293,13 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
@@ -283,9 +311,10 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -311,10 +340,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -323,28 +348,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
-CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
 #
@@ -353,13 +357,9 @@ CONFIG_BT_HCIBFUSB=m
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -368,23 +368,18 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 
 #
@@ -398,15 +393,13 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
 # CONFIG_MTD_CFI is not set
 # CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -425,12 +418,13 @@ CONFIG_MTD_CFI_I2=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -446,32 +440,23 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -479,20 +464,24 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=12000
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -507,7 +496,7 @@ CONFIG_BLK_DEV_SD=y
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
@@ -519,39 +508,46 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -568,7 +564,6 @@ CONFIG_DM9000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
@@ -577,10 +572,6 @@ CONFIG_DM9000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -595,10 +586,9 @@ CONFIG_INPUT=y
 #
 CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -612,29 +602,18 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
@@ -655,45 +634,50 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
 
 #
-# Dallas's 1-wire bus
+# SPI Master Controller Drivers
 #
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -701,19 +685,6 @@ CONFIG_HW_RANDOM=m
 # CONFIG_MFD_SM501 is not set
 
 #
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -723,81 +694,51 @@ CONFIG_HW_RANDOM=m
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
 #
-CONFIG_SOUND=m
+CONFIG_SOUND=y
 
 #
 # Advanced Linux Sound Architecture
 #
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
 CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
 #
 # Generic devices
 #
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
@@ -805,8 +746,13 @@ CONFIG_SND_AC97_CODEC=m
 #
 # ALSA ARM devices
 #
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
+# CONFIG_SND_AT91_AC97 is not set
+
+#
+# SPI devices
+#
+CONFIG_SND_AT73C213=y
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
 
 #
 # USB devices
@@ -820,16 +766,17 @@ CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SOC is not set
 
 #
-# Open Sound System
+# SoC Audio support for SuperH
 #
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
 
 #
-# HID Devices
+# Open Sound System
 #
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -838,10 +785,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -855,6 +799,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -866,6 +811,7 @@ CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -884,6 +830,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -898,7 +845,7 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -939,26 +886,66 @@ CONFIG_USB_STORAGE=y
 #
 # USB Gadget Support
 #
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
-CONFIG_MMC_PXA=m
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 
 #
-# Real Time Clock
+# LED drivers
 #
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
 # RTC interfaces
@@ -970,26 +957,28 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_V3020=m
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_SA1100=m
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
 
 #
 # File systems
@@ -997,14 +986,8 @@ CONFIG_RTC_DRV_SA1100=m
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1046,7 +1029,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1062,22 +1044,21 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1092,29 +1073,23 @@ CONFIG_SUNRPC=y
 # CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
@@ -1145,108 +1120,36 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_9 is not set
 # CONFIG_NLS_ISO8859_13 is not set
 # CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
@@ -1256,10 +1159,10 @@ CONFIG_BITREVERSE=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 98e6746d02be..d8ec5f9ca6ec 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -211,7 +211,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index d846a492e5ce..85c80f723d8e 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -171,7 +171,6 @@ CONFIG_AT91_CF=m
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 4264e273202d..f7622e658163 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -166,7 +166,6 @@ CONFIG_PCMCIA_SA1100=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index e8980a9bb893..9b8748a8d9dd 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -165,7 +165,6 @@ CONFIG_PCMCIA_PXA2XX=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index 90ed214e3673..cfeb817ad21a 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -230,7 +230,6 @@ CONFIG_AT91_CF=y
 #
 # CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 24a701ab33e5..21aa013793c6 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -184,7 +184,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index ed487b90dbed..493ecee24f94 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -251,7 +251,6 @@ CONFIG_PCMCIA_PXA2XX=m
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
new file mode 100644
index 000000000000..2a84d557adc2
--- /dev/null
+++ b/arch/arm/configs/ezx_defconfig
@@ -0,0 +1,1614 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc3
+# Mon Jul  7 17:52:21 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_PXA_EZX=y
+CONFIG_MACH_EZX_A780=y
+CONFIG_MACH_EZX_E680=y
+CONFIG_MACH_EZX_A1200=y
+CONFIG_MACH_EZX_A910=y
+CONFIG_MACH_EZX_E6=y
+CONFIG_MACH_EZX_E2=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_EZX_PCAP=y
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_PXA27x is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig
new file mode 100644
index 000000000000..bcd95b8dd2df
--- /dev/null
+++ b/arch/arm/configs/imx27ads_defconfig
@@ -0,0 +1,826 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:29:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+
+#
+# MX2 family CPU support
+#
+CONFIG_MACH_MX27=y
+
+#
+# MX2 Platforms
+#
+CONFIG_MACH_MX27ADS=y
+# CONFIG_MACH_PCM038 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_FEC_OLD is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IMX is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 988b4d13e76f..482e57061053 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 83f40d4041a6..8612f58e1056 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -201,7 +201,6 @@ CONFIG_PCI_LEGACY=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 917afb5ccfac..8b0098d19d08 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index f8f9793b526f..84680db6c615 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -184,7 +184,6 @@ CONFIG_PCI=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 27cf022dd807..4a2f7b2372db 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -180,7 +180,6 @@ CONFIG_PCI=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index efa0485d2f7e..fc14932e3abd 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y
 CONFIG_MACH_NAS100D=y
 CONFIG_MACH_DSMG600=y
 CONFIG_ARCH_IXDP4XX=y
+CONFIG_MACH_FSG=y
 CONFIG_CPU_IXP46X=y
 CONFIG_CPU_IXP43X=y
 CONFIG_MACH_GTWX5715=y
@@ -770,7 +771,7 @@ CONFIG_ATA=y
 # CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
+CONFIG_SATA_VIA=y
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_ALI is not set
@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
+CONFIG_SENSORS_W83781D=y
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-# CONFIG_LEDS_IXP4XX is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_FSG=y
 
 #
 # LED Triggers
@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_PCF8583 is not set
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index ae51a40db6f9..6dd95a2c8d5d 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -162,7 +162,6 @@ CONFIG_CPU_TLB_V4WBI=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index c16537d9d67a..8e74c66f239d 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
new file mode 100644
index 000000000000..e3357ba10f1f
--- /dev/null
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -0,0 +1,1426 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Sun Jun 22 15:51:25 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_KIRKWOOD=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Marvell Kirkwood Implementations
+#
+CONFIG_MACH_DB88F6281_BP=y
+CONFIG_MACH_RD88F6192_NAS=y
+CONFIG_MACH_RD88F6281=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_ORION=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_MV=y
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_ASYNC_CORE=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
index 8ab21a0719e9..6077f2cb88e4 100644
--- a/arch/arm/configs/ks8695_defconfig
+++ b/arch/arm/configs/ks8695_defconfig
@@ -174,7 +174,6 @@ CONFIG_PCCARD_NONSTATIC=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
new file mode 100644
index 000000000000..17da7c3b3d53
--- /dev/null
+++ b/arch/arm/configs/loki_defconfig
@@ -0,0 +1,1147 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Fri Jun 13 03:07:49 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_LOKI=y
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Marvell Loki (88RC8480) Implementations
+#
+CONFIG_MACH_LB88RC8480=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_NFTL=y
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+CONFIG_SATA_MV=y
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index a3bf5833b87a..1a38d8e3fe66 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -173,7 +173,6 @@ CONFIG_XSCALE_PMU=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 46a0f7fe1fa5..7a2e932da1c6 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -148,7 +148,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_AEABI is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
new file mode 100644
index 000000000000..d38ebf8721a4
--- /dev/null
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -0,0 +1,1445 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Fri Jun 13 02:57:32 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+CONFIG_ARCH_MV78XX0=y
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Marvell MV78xx0 Implementations
+#
+CONFIG_MACH_DB78X00_BP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+CONFIG_CPU_FEROCEON_OLD_ID=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx31ads_defconfig
new file mode 100644
index 000000000000..e05271753e15
--- /dev/null
+++ b/arch/arm/configs/mx31ads_defconfig
@@ -0,0 +1,839 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:21:11 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX2 is not set
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+CONFIG_MACH_MX31ADS=y
+# CONFIG_MACH_PCM037 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx31litekit_defconfig
new file mode 100644
index 000000000000..4f41c4135685
--- /dev/null
+++ b/arch/arm/configs/mx31litekit_defconfig
@@ -0,0 +1,1100 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Fri Jun 13 14:23:39 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_MX31LITE=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA is not set
+
+#
+# PC-card bridges
+#
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 57f32f39d0ff..0884f2370c3a 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -154,7 +154,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 650a248613e5..418ca2febbe3 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -202,7 +202,6 @@ CONFIG_AT91_CF=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 52cd99bd52fb..9578b5d9f9c7 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 14:10:30 2008
+# Linux kernel version: 2.6.26-rc4
+# Mon Jun  2 23:54:48 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,24 +41,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -73,20 +74,25 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -111,7 +117,6 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -160,6 +165,15 @@ CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
 CONFIG_MACH_TS209=y
+CONFIG_MACH_LINKSTATION_PRO=y
+CONFIG_MACH_TS409=y
+CONFIG_MACH_WRT350N_V2=y
+CONFIG_MACH_TS78XX=y
+CONFIG_MACH_MV2120=y
+CONFIG_MACH_MSS2=y
+CONFIG_MACH_WNR854T=y
+CONFIG_MACH_RD88F5181L_GE=y
+CONFIG_MACH_RD88F5181L_FXO=y
 
 #
 # Boot options
@@ -168,6 +182,7 @@ CONFIG_MACH_TS209=y
 #
 # Power management
 #
+CONFIG_PLAT_ORION=y
 
 #
 # Processor Type
@@ -177,8 +192,9 @@ CONFIG_CPU_FEROCEON=y
 CONFIG_CPU_FEROCEON_OLD_ID=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
@@ -189,7 +205,6 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_OUTER_CACHE is not set
 
 #
@@ -199,6 +214,7 @@ CONFIG_PCI=y
 CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -221,6 +237,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -238,7 +255,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
 
 #
 # Floating point emulation
@@ -311,8 +327,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -335,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -362,6 +377,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -371,6 +388,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -378,9 +396,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-# CONFIG_NFTL_RW is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
@@ -405,12 +422,12 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
+# CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
@@ -481,6 +498,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -542,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -556,7 +577,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
@@ -566,7 +590,6 @@ CONFIG_SATA_MV=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -611,6 +634,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -652,7 +676,7 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_EEPRO100 is not set
-CONFIG_E100=y
+# CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -668,9 +692,7 @@ CONFIG_E100=y
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
@@ -680,27 +702,15 @@ CONFIG_E1000_NAPI=y
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-CONFIG_SKY2=y
-# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
+# CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
@@ -708,6 +718,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -738,12 +749,9 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -765,10 +773,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -777,7 +783,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -792,7 +798,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -804,13 +810,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -837,6 +836,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 CONFIG_I2C_MV64XXX=y
 
 #
@@ -847,19 +847,13 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -872,6 +866,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -901,6 +896,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -910,6 +906,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -925,14 +922,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
@@ -949,12 +956,6 @@ CONFIG_DAB=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
 # Sound
 #
 # CONFIG_SOUND is not set
@@ -985,14 +986,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1003,6 +1008,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1022,7 +1028,9 @@ CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1060,6 +1068,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
@@ -1068,7 +1077,7 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_GPIO=y
 
 #
 # LED Triggers
@@ -1076,6 +1085,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1105,6 +1115,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1125,6 +1136,7 @@ CONFIG_RTC_DRV_M41T80=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1140,14 +1152,11 @@ CONFIG_JBD=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1155,8 +1164,8 @@ CONFIG_DNOTIFY=y
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
@@ -1205,8 +1214,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1214,7 +1225,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1241,14 +1251,13 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_MAC_PARTITION is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
+# CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
@@ -1300,15 +1309,48 @@ CONFIG_NLS_ISO8859_2=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -1317,50 +1359,79 @@ CONFIG_DEBUG_USER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1369,12 +1440,14 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
+# CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
new file mode 100644
index 000000000000..627474586470
--- /dev/null
+++ b/arch/arm/configs/pcm037_defconfig
@@ -0,0 +1,748 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Wed Jun 25 11:52:42 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_PCM037=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig
new file mode 100644
index 000000000000..6b798c215ca8
--- /dev/null
+++ b/arch/arm/configs/pcm038_defconfig
@@ -0,0 +1,1008 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:38:36 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+
+#
+# MX2 family CPU support
+#
+CONFIG_MACH_MX27=y
+
+#
+# MX2 Platforms
+#
+# CONFIG_MACH_MX27ADS is not set
+CONFIG_MACH_PCM038=y
+CONFIG_MACH_PCM970_BASEBOARD=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC_OLD=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 95a22f512805..14826f0dabde 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -201,7 +201,6 @@ CONFIG_ARM_THUMB=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-CONFIG_NO_IDLE_HZ=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index b5e11aa2e290..811b8f60d19d 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -151,7 +151,6 @@ CONFIG_ARM_THUMB=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
new file mode 100644
index 000000000000..ef903bed061e
--- /dev/null
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -0,0 +1,1256 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Tue Apr 15 12:28:38 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+CONFIG_MACH_QIL_A9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_AT91_EARLY_DBGU is not set
+CONFIG_AT91_EARLY_USART0=y
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_AT91SAM9_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+CONFIG_RTC_DRV_M41T94=y
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index fc39ba1a89f3..0c09b23167ec 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -177,7 +177,6 @@ CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
 CONFIG_LOCAL_TIMERS=y
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index accbf529ce5b..907e54344dad 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index 5ddecb9ddf01..f62d1817d2c6 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -190,7 +190,6 @@ CONFIG_ISA_DMA_API=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f8a1645b3d4a..35faaea8623e 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc6
-# Mon Apr  9 10:12:58 2007
+# Linux kernel version: 2.6.26-rc8
+# Mon Jul  7 16:59:23 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -18,34 +21,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=m
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -53,6 +61,7 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -60,34 +69,43 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -101,6 +119,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
@@ -119,14 +138,17 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -134,18 +156,32 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
 CONFIG_PLAT_S3C24XX=y
 CONFIG_CPU_S3C244X=y
+# CONFIG_S3C24XX_PWM is not set
 CONFIG_PM_SIMTEC=y
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_MACH_SMDK=y
+CONFIG_PLAT_S3C=y
+CONFIG_CPU_LLSERIAL_S3C2410=y
+CONFIG_CPU_LLSERIAL_S3C2440=y
+
+#
+# Boot options
+#
 # CONFIG_S3C_BOOT_WATCHDOG is not set
 # CONFIG_S3C_BOOT_ERROR_RESET is not set
+
+#
+# Power management
+#
 # CONFIG_S3C2410_PM_DEBUG is not set
 # CONFIG_S3C2410_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_MACH_SMDK=y
 
 #
 # S3C2400 Machines
@@ -155,6 +191,8 @@ CONFIG_CPU_S3C2410_DMA=y
 CONFIG_S3C2410_PM=y
 CONFIG_S3C2410_GPIO=y
 CONFIG_S3C2410_CLOCK=y
+CONFIG_SIMTEC_NOR=y
+CONFIG_MACH_BAST_IDE=y
 
 #
 # S3C2410 Machines
@@ -167,6 +205,7 @@ CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
 CONFIG_BAST_PC104_IRQ=y
+# CONFIG_MACH_TCT_HAMMER is not set
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_QT2410=y
 CONFIG_CPU_S3C2412=y
@@ -176,8 +215,10 @@ CONFIG_S3C2412_PM=y
 #
 # S3C2412 Machines
 #
+# CONFIG_MACH_JIVE is not set
 CONFIG_MACH_SMDK2413=y
 CONFIG_MACH_S3C2413=y
+# CONFIG_MACH_SMDK2412 is not set
 CONFIG_MACH_VSTMS=y
 CONFIG_CPU_S3C2440=y
 CONFIG_S3C2440_DMA=y
@@ -191,6 +232,7 @@ CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
+# CONFIG_MACH_AT2440EVB is not set
 CONFIG_CPU_S3C2442=y
 
 #
@@ -215,6 +257,7 @@ CONFIG_CPU_32v4T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
@@ -236,17 +279,15 @@ CONFIG_CPU_CP15_MMU=y
 # Bus support
 #
 CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+# CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=200
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -257,9 +298,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -279,7 +324,7 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set
 # CONFIG_VFP is not set
 
@@ -295,10 +340,12 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=m
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -308,59 +355,67 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -373,20 +428,71 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -395,21 +501,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -420,6 +519,7 @@ CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -432,6 +532,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -457,7 +558,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -486,13 +586,10 @@ CONFIG_MTD_BAST_MAXSIZE=4
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_DEBUG is not set
@@ -500,30 +597,25 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 CONFIG_PARPORT=y
-# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
 # CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_AX88796=m
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
 # CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
+# CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -532,34 +624,34 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
 CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDE_BAST=y
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_BLK_DEV_HD is not set
 
@@ -567,101 +659,119 @@ CONFIG_BLK_DEV_IDE_BAST=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_HAVE_PATA_PLATFORM=y
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
+# CONFIG_ENC28J60 is not set
+CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -669,6 +779,7 @@ CONFIG_DM9000=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -678,7 +789,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -695,12 +805,21 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -721,6 +840,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -728,8 +848,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
@@ -758,8 +876,12 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_SAMSUNG=y
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
+CONFIG_SERIAL_S3C2412=y
+CONFIG_SERIAL_S3C2440=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -768,89 +890,50 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_S3C2410_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 CONFIG_I2C_S3C2410=y
+CONFIG_I2C_SIMTEC=y
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -860,6 +943,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=m
 # CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_S3C24XX_GPIO=m
 
@@ -867,30 +951,43 @@ CONFIG_SPI_S3C24XX_GPIO=m
 # SPI Protocol Masters
 #
 # CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
 
 #
-# Dallas's 1-wire bus
+# GPIO Support
 #
-# CONFIG_W1 is not set
+# CONFIG_DEBUG_GPIO is not set
 
 #
-# Hardware Monitoring support
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
 #
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -905,72 +1002,95 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_S3C2410_WATCHDOG=y
 
 #
-# Multifunction device drivers
+# ISA-based Watchdog Cards
 #
-# CONFIG_MFD_SM501 is not set
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
 
 #
-# LED devices
+# USB-based Watchdog Cards
 #
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+# CONFIG_USBPCWATCHDOG is not set
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
-CONFIG_LEDS_S3C24XX=m
-CONFIG_LEDS_H1940=m
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_MFD_SM501=y
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -978,12 +1098,19 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 
 #
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
 # CONFIG_FB_S3C2410_DEBUG is not set
+CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -992,40 +1119,45 @@ CONFIG_FB_S3C2410=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+# CONFIG_USB_HID is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
@@ -1033,18 +1165,22 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1053,57 +1189,78 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+CONFIG_USB_SERIAL_OPTION=m
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
@@ -1116,35 +1273,38 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
+CONFIG_USB_LED=m
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
+CONFIG_USB_LD=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
 
 #
-# MMC/SD Card support
+# LED drivers
 #
-# CONFIG_MMC is not set
+CONFIG_LEDS_S3C24XX=m
+CONFIG_LEDS_H1940=m
+# CONFIG_LEDS_GPIO is not set
 
 #
-# Real Time Clock
+# LED Triggers
 #
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1158,61 +1318,86 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# I2C RTC drivers
 #
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-CONFIG_RTC_DRV_S3C=y
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_UIO is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
@@ -1222,7 +1407,9 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
 
 #
 # Pseudo filesystems
@@ -1230,10 +1417,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1248,31 +1435,32 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1280,7 +1468,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1302,94 +1489,93 @@ CONFIG_SOLARIS_X86_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 CONFIG_DEBUG_S3C_PORT=y
@@ -1400,21 +1586,100 @@ CONFIG_DEBUG_S3C_UART=0
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 484dc9739dfc..8688362bcf7b 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -211,7 +211,6 @@ CONFIG_ARM_THUMB=y
 #
 # CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index aa7a01179500..7d59fb1f1cea 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -164,7 +164,6 @@ CONFIG_PCMCIA_PXA2XX=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 576b8339f0d6..07dfb98df4f0 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -247,7 +247,6 @@ CONFIG_ARM_THUMB=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=200
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 6db6392806f9..8b7a431a8bfc 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -195,7 +195,6 @@ CONFIG_PCMCIA_PXA2XX=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
new file mode 100644
index 000000000000..3680bd2df26d
--- /dev/null
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -0,0 +1,1142 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Tue Apr 15 11:39:35 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+CONFIG_MACH_USB_A9260=y
+# CONFIG_MACH_QIL_A9260 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
new file mode 100644
index 000000000000..48d455bc7363
--- /dev/null
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -0,0 +1,1134 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Tue Apr 15 11:15:19 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9263 Board Type
+#
+# CONFIG_MACH_AT91SAM9263EK is not set
+CONFIG_MACH_USB_A9263=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 48dca69addae..8355f88f7292 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -151,7 +151,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/xm_x270_defconfig
index 5cab08397ae7..aa40d91ce599 100644
--- a/arch/arm/configs/cm_x270_defconfig
+++ b/arch/arm/configs/xm_x270_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Wed Jul 18 14:11:48 2007
+# Linux kernel version: 2.6.25
+# Sun May 11 15:12:52 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
@@ -21,21 +21,18 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
@@ -44,13 +41,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -58,6 +62,7 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -65,24 +70,34 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -99,11 +114,12 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
@@ -131,6 +147,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
@@ -140,19 +158,41 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
 CONFIG_DMABOUNCE=y
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+
+#
+# Select target boards
+#
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_MACH_EM_X270=y
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
 CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
 CONFIG_PXA27x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # Processor Type
@@ -161,6 +201,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -182,21 +223,40 @@ CONFIG_PCI=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCI_HOST_ITE8152=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
 
 #
-# PCCARD (PCMCIA/CardBus) support
+# PC-card bridges
 #
-# CONFIG_PCCARD is not set
+CONFIG_YENTA=m
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_ENE_TUNE is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCCARD_NONSTATIC=m
 
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -205,6 +265,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -217,11 +279,16 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="root=1f03 mem=32M"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Floating point emulation
 #
 
@@ -238,16 +305,17 @@ CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=m
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -258,15 +326,16 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
@@ -275,6 +344,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
@@ -285,15 +355,13 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -310,10 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -321,8 +385,33 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
 
 #
@@ -331,12 +420,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -347,38 +431,47 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-CONFIG_MTD=m
+CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -389,15 +482,29 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -415,18 +522,19 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
 # CONFIG_MTD_NAND_CAFE is not set
-CONFIG_MTD_NAND_CM_X270=m
+CONFIG_MTD_NAND_CM_X270=y
 # CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -447,36 +555,13 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=12000
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -486,7 +571,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -513,12 +598,9 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -529,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -539,8 +622,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
@@ -550,16 +635,69 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -574,6 +712,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -585,64 +724,65 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=1
 # CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=m
+CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_MLX4_CORE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBERTAS_CS is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
 
 #
 # USB Network Adapters
@@ -651,15 +791,24 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -675,20 +824,32 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -697,13 +858,22 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -713,7 +883,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -730,83 +902,141 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
 
 #
-# SPI support
+# GPIO Support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_DEBUG_GPIO is not set
 
 #
-# Multifunction device drivers
+# I2C GPIO expanders:
 #
-# CONFIG_MFD_SM501 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
-# LED devices
+# SPI GPIO expanders:
 #
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
-CONFIG_LEDS_CM_X270=y
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
 CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
@@ -842,9 +1072,17 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
+# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -904,10 +1142,12 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_DARLA20 is not set
@@ -932,6 +1172,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -949,6 +1190,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_AC97_POWER_SAVE is not set
@@ -966,18 +1208,33 @@ CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_USB_CAIAQ is not set
 
 #
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
 # System on Chip audio support
 #
 # CONFIG_SND_SOC is not set
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -992,6 +1249,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1000,8 +1258,9 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
@@ -1033,13 +1292,16 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1052,10 +1314,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1080,14 +1338,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
@@ -1098,6 +1348,7 @@ CONFIG_MMC=m
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
 # MMC/SD Host Controller Drivers
@@ -1105,10 +1356,22 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_TIFM_SD is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 
 #
-# Real Time Clock
+# LED drivers
 #
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_CM_X270=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1125,11 +1388,32 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 CONFIG_RTC_DRV_V3020=y
@@ -1138,19 +1422,7 @@ CONFIG_RTC_DRV_V3020=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1164,20 +1436,16 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1191,9 +1459,9 @@ CONFIG_DNOTIFY=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -1207,7 +1475,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1220,22 +1487,30 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1245,9 +1520,13 @@ CONFIG_SUNRPC=y
 # CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1255,15 +1534,27 @@ CONFIG_SMB_FS=y
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1287,7 +1578,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1300,53 +1591,52 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FRAME_WARN=0
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1355,55 +1645,96 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ad455ff5aebe..1d296fc8494e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -4,6 +4,10 @@
 
 AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
 
+ifdef CONFIG_DYNAMIC_FTRACE
+CFLAGS_REMOVE_ftrace.o = -pg
+endif
+
 # Object file lists.
 
 obj-y		:= compat.o entry-armv.o entry-common.o irq.o \
@@ -18,11 +22,13 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 688b7b1ee416..cc7b246e9652 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -18,6 +18,7 @@
 #include <asm/io.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/ftrace.h>
 
 /*
  * libgcc functions - functions that are used internally by the
@@ -181,3 +182,7 @@ EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
 EXPORT_SYMBOL(copy_page);
+
+#ifdef CONFIG_FTRACE
+EXPORT_SYMBOL(mcount);
+#endif
diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c
index 64c420805e6f..42a1a1415fa6 100644
--- a/arch/arm/kernel/atags.c
+++ b/arch/arm/kernel/atags.c
@@ -1,5 +1,4 @@
 #include <linux/slab.h>
-#include <linux/kexec.h>
 #include <linux/proc_fs.h>
 #include <asm/setup.h>
 #include <asm/types.h>
@@ -7,9 +6,8 @@
 
 struct buffer {
 	size_t size;
-	char *data;
+	char data[];
 };
-static struct buffer tags_buffer;
 
 static int
 read_buffer(char* page, char** start, off_t off, int count,
@@ -29,58 +27,57 @@ read_buffer(char* page, char** start, off_t off, int count,
 	return count;
 }
 
-
-static int
-create_proc_entries(void)
-{
-	struct proc_dir_entry* tags_entry;
-
-	tags_entry = create_proc_read_entry("atags", 0400, NULL, read_buffer, &tags_buffer);
-	if (!tags_entry)
-		return -ENOMEM;
-
-	return 0;
-}
-
-
-static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE];
-static char __initdata *atags_copy;
+#define BOOT_PARAMS_SIZE 1536
+static char __initdata atags_copy[BOOT_PARAMS_SIZE];
 
 void __init save_atags(const struct tag *tags)
 {
-	atags_copy = atags_copy_buf;
-	memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE);
+	memcpy(atags_copy, tags, sizeof(atags_copy));
 }
 
-
 static int __init init_atags_procfs(void)
 {
-	struct tag *tag;
-	int error;
+	/*
+	 * This cannot go into save_atags() because kmalloc and proc don't work
+	 * yet when it is called.
+	 */
+	struct proc_dir_entry *tags_entry;
+	struct tag *tag = (struct tag *)atags_copy;
+	struct buffer *b;
+	size_t size;
 
-	if (!atags_copy) {
-		printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n");
-		return -EIO;
+	if (tag->hdr.tag != ATAG_CORE) {
+		printk(KERN_INFO "No ATAGs?");
+		return -EINVAL;
 	}
 
-	for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag))
+	for (; tag->hdr.size; tag = tag_next(tag))
 		;
 
-	tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr);
-	tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL);
-	if (tags_buffer.data == NULL)
-		return -ENOMEM;
-	memcpy(tags_buffer.data, atags_copy, tags_buffer.size);
-
-	error = create_proc_entries();
-	if (error) {
-		printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
-		kfree(tags_buffer.data);
-		tags_buffer.size = 0;
-		tags_buffer.data = NULL;
-	}
+	/* include the terminating ATAG_NONE */
+	size = (char *)tag - atags_copy + sizeof(struct tag_header);
 
-	return error;
-}
+	WARN_ON(tag->hdr.tag != ATAG_NONE);
+
+	b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
+	if (!b)
+		goto nomem;
 
+	b->size = size;
+	memcpy(b->data, atags_copy, size);
+
+	tags_entry = create_proc_read_entry("atags", 0400,
+			NULL, read_buffer, b);
+
+	if (!tags_entry)
+		goto nomem;
+
+	return 0;
+
+nomem:
+	kfree(b);
+	printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
+
+	return -ENOMEM;
+}
 arch_initcall(init_atags_procfs);
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index a53c0aba5c14..f5cfdabcb87d 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -680,7 +680,7 @@ static int __init ecard_probeirqhw(void)
 #define IO_EC_MEMC8_BASE 0
 #endif
 
-unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
+static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
 {
 	unsigned long address = 0;
 	int slot = ec->slot_no;
@@ -783,7 +783,7 @@ static void ecard_proc_init(void)
 
 #define ec_set_resource(ec,nr,st,sz)				\
 	do {							\
-		(ec)->resource[nr].name = ec->dev.bus_id;	\
+		(ec)->resource[nr].name = dev_name(&ec->dev);	\
 		(ec)->resource[nr].start = st;			\
 		(ec)->resource[nr].end = (st) + (sz) - 1;	\
 		(ec)->resource[nr].flags = IORESOURCE_MEM;	\
@@ -853,8 +853,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
 	for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
 		if (ec->resource[i].flags &&
 		    request_resource(&iomem_resource, &ec->resource[i])) {
-			printk(KERN_ERR "%s: resource(s) not available\n",
-				ec->dev.bus_id);
+			dev_err(&ec->dev, "resource(s) not available\n");
 			ec->resource[i].end -= ec->resource[i].start;
 			ec->resource[i].start = 0;
 			ec->resource[i].flags = 0;
@@ -1002,7 +1001,7 @@ ecard_probe(int slot, card_type_t type)
 	}
 
 	rc = -ENODEV;
-	if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0)
+	if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0)
 		goto nodev;
 
 	cid.r_zero = 1;
@@ -1141,10 +1140,10 @@ static int ecard_drv_probe(struct device *dev)
 
 	id = ecard_match_device(drv->id_table, ec);
 
-	ecard_claim(ec);
+	ec->claimed = 1;
 	ret = drv->probe(ec, id);
 	if (ret)
-		ecard_release(ec);
+		ec->claimed = 0;
 	return ret;
 }
 
@@ -1154,7 +1153,7 @@ static int ecard_drv_remove(struct device *dev)
 	struct ecard_driver *drv = ECARD_DRV(dev->driver);
 
 	drv->remove(ec);
-	ecard_release(ec);
+	ec->claimed = 0;
 
 	/*
 	 * Restore the default operations.  We ensure that the
@@ -1182,7 +1181,7 @@ static void ecard_drv_shutdown(struct device *dev)
 	if (dev->driver) {
 		if (drv->shutdown)
 			drv->shutdown(ec);
-		ecard_release(ec);
+		ec->claimed = 0;
 	}
 
 	/*
@@ -1239,7 +1238,6 @@ static int ecard_bus_init(void)
 postcore_initcall(ecard_bus_init);
 
 EXPORT_SYMBOL(ecard_readchunk);
-EXPORT_SYMBOL(__ecard_address);
 EXPORT_SYMBOL(ecard_register_driver);
 EXPORT_SYMBOL(ecard_remove_driver);
 EXPORT_SYMBOL(ecard_bus_type);
diff --git a/arch/arm/kernel/ecard.h b/arch/arm/kernel/ecard.h
index d7c2dacf935d..4642d436be2a 100644
--- a/arch/arm/kernel/ecard.h
+++ b/arch/arm/kernel/ecard.h
@@ -54,3 +54,16 @@ struct ex_chunk_dir {
 #define c_len(x)	((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
 #define c_start(x)	((x)->r_start)
 };
+
+typedef enum ecard_type {		/* Cards address space		*/
+	ECARD_IOC,
+	ECARD_MEMC,
+	ECARD_EASI
+} card_type_t;
+
+typedef enum {				/* Speed for ECARD_IOC space	*/
+	ECARD_SLOW	 = 0,
+	ECARD_MEDIUM	 = 1,
+	ECARD_FAST	 = 2,
+	ECARD_SYNC	 = 3
+} card_speed_t;
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 597ed00a08d8..84694e88b428 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -9,6 +9,7 @@
  */
 
 #include <asm/unistd.h>
+#include <asm/ftrace.h>
 #include <asm/arch/entry-macro.S>
 
 #include "entry-header.S"
@@ -99,6 +100,56 @@ ENTRY(ret_from_fork)
 #undef CALL
 #define CALL(x) .long x
 
+#ifdef CONFIG_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(mcount)
+	stmdb sp!, {r0-r3, lr}
+	mov r0, lr
+	sub r0, r0, #MCOUNT_INSN_SIZE
+
+	.globl mcount_call
+mcount_call:
+	bl ftrace_stub
+	ldmia sp!, {r0-r3, pc}
+
+ENTRY(ftrace_caller)
+	stmdb sp!, {r0-r3, lr}
+	ldr r1, [fp, #-4]
+	mov r0, lr
+	sub r0, r0, #MCOUNT_INSN_SIZE
+
+	.globl ftrace_call
+ftrace_call:
+	bl ftrace_stub
+	ldmia sp!, {r0-r3, pc}
+
+#else
+
+ENTRY(mcount)
+	stmdb sp!, {r0-r3, lr}
+	ldr r0, =ftrace_trace_function
+	ldr r2, [r0]
+	adr r0, ftrace_stub
+	cmp r0, r2
+	bne trace
+	ldmia sp!, {r0-r3, pc}
+
+trace:
+	ldr r1, [fp, #-4]
+	mov r0, lr
+	sub r0, r0, #MCOUNT_INSN_SIZE
+	mov lr, pc
+	mov pc, r2
+	ldmia sp!, {r0-r3, pc}
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+	.globl ftrace_stub
+ftrace_stub:
+	mov pc, lr
+
+#endif /* CONFIG_FTRACE */
+
 /*=============================================================================
  * SWI handler
  *-----------------------------------------------------------------------------
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
new file mode 100644
index 000000000000..76d50e6091bc
--- /dev/null
+++ b/arch/arm/kernel/ftrace.c
@@ -0,0 +1,116 @@
+/*
+ * Dynamic function tracing support.
+ *
+ * Copyright (C) 2008 Abhishek Sagar <sagar.abhishek@gmail.com>
+ *
+ * For licencing details, see COPYING.
+ *
+ * Defines low-level handling of mcount calls when the kernel
+ * is compiled with the -pg flag. When using dynamic ftrace, the
+ * mcount call-sites get patched lazily with NOP till they are
+ * enabled. All code mutation routines here take effect atomically.
+ */
+
+#include <linux/ftrace.h>
+
+#include <asm/cacheflush.h>
+#include <asm/ftrace.h>
+
+#define PC_OFFSET      8
+#define BL_OPCODE      0xeb000000
+#define BL_OFFSET_MASK 0x00ffffff
+
+static unsigned long bl_insn;
+static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */
+
+unsigned char *ftrace_nop_replace(void)
+{
+	return (char *)&NOP;
+}
+
+/* construct a branch (BL) instruction to addr */
+unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr)
+{
+	long offset;
+
+	offset = (long)addr - (long)(pc + PC_OFFSET);
+	if (unlikely(offset < -33554432 || offset > 33554428)) {
+		/* Can't generate branches that far (from ARM ARM). Ftrace
+		 * doesn't generate branches outside of kernel text.
+		 */
+		WARN_ON_ONCE(1);
+		return NULL;
+	}
+	offset = (offset >> 2) & BL_OFFSET_MASK;
+	bl_insn = BL_OPCODE | offset;
+	return (unsigned char *)&bl_insn;
+}
+
+int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
+		       unsigned char *new_code)
+{
+	unsigned long err = 0, replaced = 0, old, new;
+
+	old = *(unsigned long *)old_code;
+	new = *(unsigned long *)new_code;
+
+	__asm__ __volatile__ (
+		"1:  ldr    %1, [%2]  \n"
+		"    cmp    %1, %4    \n"
+		"2:  streq  %3, [%2]  \n"
+		"    cmpne  %1, %3    \n"
+		"    movne  %0, #2    \n"
+		"3:\n"
+
+		".section .fixup, \"ax\"\n"
+		"4:  mov  %0, #1  \n"
+		"    b    3b      \n"
+		".previous\n"
+
+		".section __ex_table, \"a\"\n"
+		"    .long 1b, 4b \n"
+		"    .long 2b, 4b \n"
+		".previous\n"
+
+		: "=r"(err), "=r"(replaced)
+		: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
+		: "memory");
+
+	if (!err && (replaced == old))
+		flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
+
+	return err;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	int ret;
+	unsigned long pc, old;
+	unsigned char *new;
+
+	pc = (unsigned long)&ftrace_call;
+	memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(pc, (unsigned long)func);
+	ret = ftrace_modify_code(pc, (unsigned char *)&old, new);
+	return ret;
+}
+
+int ftrace_mcount_set(unsigned long *data)
+{
+	unsigned long pc, old;
+	unsigned long *addr = data;
+	unsigned char *new;
+
+	pc = (unsigned long)&mcount_call;
+	memcpy(&old, &mcount_call, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(pc, *addr);
+	*addr = ftrace_modify_code(pc, (unsigned char *)&old, new);
+	return 0;
+}
+
+/* run from kstop_machine */
+int __init ftrace_dyn_arch_init(void *data)
+{
+	ftrace_mcount_set(data);
+	return 0;
+}
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
new file mode 100644
index 000000000000..aaffaecffcd1
--- /dev/null
+++ b/arch/arm/kernel/kgdb.c
@@ -0,0 +1,201 @@
+/*
+ * arch/arm/kernel/kgdb.c
+ *
+ * ARM KGDB support
+ *
+ * Copyright (c) 2002-2004 MontaVista Software, Inc
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:  George Davis <davis_g@mvista.com>
+ *           Deepak Saxena <dsaxena@plexity.net>
+ */
+#include <linux/kgdb.h>
+#include <asm/traps.h>
+
+/* Make a local copy of the registers passed into the handler (bletch) */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	int regno;
+
+	/* Initialize all to zero. */
+	for (regno = 0; regno < GDB_MAX_REGS; regno++)
+		gdb_regs[regno] = 0;
+
+	gdb_regs[_R0]		= kernel_regs->ARM_r0;
+	gdb_regs[_R1]		= kernel_regs->ARM_r1;
+	gdb_regs[_R2]		= kernel_regs->ARM_r2;
+	gdb_regs[_R3]		= kernel_regs->ARM_r3;
+	gdb_regs[_R4]		= kernel_regs->ARM_r4;
+	gdb_regs[_R5]		= kernel_regs->ARM_r5;
+	gdb_regs[_R6]		= kernel_regs->ARM_r6;
+	gdb_regs[_R7]		= kernel_regs->ARM_r7;
+	gdb_regs[_R8]		= kernel_regs->ARM_r8;
+	gdb_regs[_R9]		= kernel_regs->ARM_r9;
+	gdb_regs[_R10]		= kernel_regs->ARM_r10;
+	gdb_regs[_FP]		= kernel_regs->ARM_fp;
+	gdb_regs[_IP]		= kernel_regs->ARM_ip;
+	gdb_regs[_SPT]		= kernel_regs->ARM_sp;
+	gdb_regs[_LR]		= kernel_regs->ARM_lr;
+	gdb_regs[_PC]		= kernel_regs->ARM_pc;
+	gdb_regs[_CPSR]		= kernel_regs->ARM_cpsr;
+}
+
+/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	kernel_regs->ARM_r0	= gdb_regs[_R0];
+	kernel_regs->ARM_r1	= gdb_regs[_R1];
+	kernel_regs->ARM_r2	= gdb_regs[_R2];
+	kernel_regs->ARM_r3	= gdb_regs[_R3];
+	kernel_regs->ARM_r4	= gdb_regs[_R4];
+	kernel_regs->ARM_r5	= gdb_regs[_R5];
+	kernel_regs->ARM_r6	= gdb_regs[_R6];
+	kernel_regs->ARM_r7	= gdb_regs[_R7];
+	kernel_regs->ARM_r8	= gdb_regs[_R8];
+	kernel_regs->ARM_r9	= gdb_regs[_R9];
+	kernel_regs->ARM_r10	= gdb_regs[_R10];
+	kernel_regs->ARM_fp	= gdb_regs[_FP];
+	kernel_regs->ARM_ip	= gdb_regs[_IP];
+	kernel_regs->ARM_sp	= gdb_regs[_SPT];
+	kernel_regs->ARM_lr	= gdb_regs[_LR];
+	kernel_regs->ARM_pc	= gdb_regs[_PC];
+	kernel_regs->ARM_cpsr	= gdb_regs[_CPSR];
+}
+
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+	struct pt_regs *thread_regs;
+	int regno;
+
+	/* Just making sure... */
+	if (task == NULL)
+		return;
+
+	/* Initialize to zero */
+	for (regno = 0; regno < GDB_MAX_REGS; regno++)
+		gdb_regs[regno] = 0;
+
+	/* Otherwise, we have only some registers from switch_to() */
+	thread_regs		= task_pt_regs(task);
+	gdb_regs[_R0]		= thread_regs->ARM_r0;
+	gdb_regs[_R1]		= thread_regs->ARM_r1;
+	gdb_regs[_R2]		= thread_regs->ARM_r2;
+	gdb_regs[_R3]		= thread_regs->ARM_r3;
+	gdb_regs[_R4]		= thread_regs->ARM_r4;
+	gdb_regs[_R5]		= thread_regs->ARM_r5;
+	gdb_regs[_R6]		= thread_regs->ARM_r6;
+	gdb_regs[_R7]		= thread_regs->ARM_r7;
+	gdb_regs[_R8]		= thread_regs->ARM_r8;
+	gdb_regs[_R9]		= thread_regs->ARM_r9;
+	gdb_regs[_R10]		= thread_regs->ARM_r10;
+	gdb_regs[_FP]		= thread_regs->ARM_fp;
+	gdb_regs[_IP]		= thread_regs->ARM_ip;
+	gdb_regs[_SPT]		= thread_regs->ARM_sp;
+	gdb_regs[_LR]		= thread_regs->ARM_lr;
+	gdb_regs[_PC]		= thread_regs->ARM_pc;
+	gdb_regs[_CPSR]		= thread_regs->ARM_cpsr;
+}
+
+static int compiled_break;
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+			       int err_code, char *remcom_in_buffer,
+			       char *remcom_out_buffer,
+			       struct pt_regs *linux_regs)
+{
+	unsigned long addr;
+	char *ptr;
+
+	switch (remcom_in_buffer[0]) {
+	case 'D':
+	case 'k':
+	case 'c':
+		kgdb_contthread = NULL;
+
+		/*
+		 * Try to read optional parameter, pc unchanged if no parm.
+		 * If this was a compiled breakpoint, we need to move
+		 * to the next instruction or we will just breakpoint
+		 * over and over again.
+		 */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->ARM_pc = addr;
+		else if (compiled_break == 1)
+			linux_regs->ARM_pc += 4;
+
+		compiled_break = 0;
+
+		return 0;
+	}
+
+	return -1;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+	return 0;
+}
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+	compiled_break = 1;
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+	return 0;
+}
+
+static struct undef_hook kgdb_brkpt_hook = {
+	.instr_mask		= 0xffffffff,
+	.instr_val		= KGDB_BREAKINST,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_hook = {
+	.instr_mask		= 0xffffffff,
+	.instr_val		= KGDB_COMPILED_BREAK,
+	.fn			= kgdb_compiled_brk_fn
+};
+
+/**
+ *	kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ *	This function will handle the initalization of any architecture
+ *	specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+	register_undef_hook(&kgdb_brkpt_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_hook);
+
+	return 0;
+}
+
+/**
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_undef_hook(&kgdb_brkpt_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+}
+
+/*
+ * Register our undef instruction hooks with ARM undef core.
+ * We regsiter a hook specifically looking for the KGB break inst
+ * and we handle the normal undef case within the do_undefinstr
+ * handler.
+ */
+struct kgdb_arch arch_kgdb_ops = {
+#ifndef __ARMEB__
+	.gdb_bpt_instr		= {0xfe, 0xde, 0xff, 0xe7}
+#else /* ! __ARMEB__ */
+	.gdb_bpt_instr		= {0xe7, 0xff, 0xde, 0xfe}
+#endif
+};
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 5593dd207216..d28513f14d05 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -274,7 +274,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
  * for kretprobe handlers which should normally be interested in r0 only
  * anyway.
  */
-static void __attribute__((naked)) __kprobes kretprobe_trampoline(void)
+void __naked __kprobes kretprobe_trampoline(void)
 {
 	__asm__ __volatile__ (
 		"stmdb	sp!, {r0 - r11}		\n\t"
@@ -296,8 +296,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -337,7 +336,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	}
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
@@ -347,7 +346,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	return (void *)orig_ret_address;
 }
 
-/* Called with kretprobe_lock held. */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 79b7e5cf5416..a68259a0cccd 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/moduleloader.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 46bf2ede6128..89bfded70a1f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -133,10 +133,8 @@ static void default_idle(void)
 		cpu_relax();
 	else {
 		local_irq_disable();
-		if (!need_resched()) {
-			timer_dyn_reprogram();
+		if (!need_resched())
 			arch_idle();
-		}
 		local_irq_enable();
 	}
 }
@@ -164,7 +162,7 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 		leds_event(led_idle_start);
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		leds_event(led_idle_end);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b7b0720bc1bb..38f0e7940a13 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <asm/traps.h>
 
 #include "compat.h"
 #include "atags.h"
@@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &dummy_con;
 #endif
 #endif
+	early_trap_init();
 }
 
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index eefae1de334c..5a7c09564d13 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -68,20 +68,10 @@ enum ipi_msg_type {
 	IPI_TIMER,
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
+	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP,
 };
 
-struct smp_call_struct {
-	void (*func)(void *info);
-	void *info;
-	int wait;
-	cpumask_t pending;
-	cpumask_t unfinished;
-};
-
-static struct smp_call_struct * volatile smp_call_function_data;
-static DEFINE_SPINLOCK(smp_call_function_lock);
-
 int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
@@ -366,114 +356,15 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
 	local_irq_restore(flags);
 }
 
-/*
- * You must not call this function with disabled interrupts, from a
- * hardware interrupt handler, nor from a bottom half handler.
- */
-static int smp_call_function_on_cpu(void (*func)(void *info), void *info,
-				    int retry, int wait, cpumask_t callmap)
-{
-	struct smp_call_struct data;
-	unsigned long timeout;
-	int ret = 0;
-
-	data.func = func;
-	data.info = info;
-	data.wait = wait;
-
-	cpu_clear(smp_processor_id(), callmap);
-	if (cpus_empty(callmap))
-		goto out;
-
-	data.pending = callmap;
-	if (wait)
-		data.unfinished = callmap;
-
-	/*
-	 * try to get the mutex on smp_call_function_data
-	 */
-	spin_lock(&smp_call_function_lock);
-	smp_call_function_data = &data;
-
-	send_ipi_message(callmap, IPI_CALL_FUNC);
-
-	timeout = jiffies + HZ;
-	while (!cpus_empty(data.pending) && time_before(jiffies, timeout))
-		barrier();
-
-	/*
-	 * did we time out?
-	 */
-	if (!cpus_empty(data.pending)) {
-		/*
-		 * this may be causing our panic - report it
-		 */
-		printk(KERN_CRIT
-		       "CPU%u: smp_call_function timeout for %p(%p)\n"
-		       "      callmap %lx pending %lx, %swait\n",
-		       smp_processor_id(), func, info, *cpus_addr(callmap),
-		       *cpus_addr(data.pending), wait ? "" : "no ");
-
-		/*
-		 * TRACE
-		 */
-		timeout = jiffies + (5 * HZ);
-		while (!cpus_empty(data.pending) && time_before(jiffies, timeout))
-			barrier();
-
-		if (cpus_empty(data.pending))
-			printk(KERN_CRIT "     RESOLVED\n");
-		else
-			printk(KERN_CRIT "     STILL STUCK\n");
-	}
-
-	/*
-	 * whatever happened, we're done with the data, so release it
-	 */
-	smp_call_function_data = NULL;
-	spin_unlock(&smp_call_function_lock);
-
-	if (!cpus_empty(data.pending)) {
-		ret = -ETIMEDOUT;
-		goto out;
-	}
-
-	if (wait)
-		while (!cpus_empty(data.unfinished))
-			barrier();
- out:
-
-	return 0;
-}
-
-int smp_call_function(void (*func)(void *info), void *info, int retry,
-                      int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	return smp_call_function_on_cpu(func, info, retry, wait,
-					cpu_online_map);
+	send_ipi_message(mask, IPI_CALL_FUNC);
 }
-EXPORT_SYMBOL_GPL(smp_call_function);
 
-int smp_call_function_single(int cpu, void (*func)(void *info), void *info,
-			     int retry, int wait)
+void arch_send_call_function_single_ipi(int cpu)
 {
-	/* prevent preemption and reschedule on another processor */
-	int current_cpu = get_cpu();
-	int ret = 0;
-
-	if (cpu == current_cpu) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-	} else
-		ret = smp_call_function_on_cpu(func, info, retry, wait,
-					       cpumask_of_cpu(cpu));
-
-	put_cpu();
-
-	return ret;
+	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
 }
-EXPORT_SYMBOL_GPL(smp_call_function_single);
 
 void show_ipi_list(struct seq_file *p)
 {
@@ -521,27 +412,6 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 }
 #endif
 
-/*
- * ipi_call_function - handle IPI from smp_call_function()
- *
- * Note that we copy data out of the cross-call structure and then
- * let the caller know that we're here and have done with their data
- */
-static void ipi_call_function(unsigned int cpu)
-{
-	struct smp_call_struct *data = smp_call_function_data;
-	void (*func)(void *info) = data->func;
-	void *info = data->info;
-	int wait = data->wait;
-
-	cpu_clear(cpu, data->pending);
-
-	func(info);
-
-	if (wait)
-		cpu_clear(cpu, data->unfinished);
-}
-
 static DEFINE_SPINLOCK(stop_lock);
 
 /*
@@ -611,7 +481,11 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
 				break;
 
 			case IPI_CALL_FUNC:
-				ipi_call_function(cpu);
+				generic_smp_call_function_interrupt();
+				break;
+
+			case IPI_CALL_FUNC_SINGLE:
+				generic_smp_call_function_single_interrupt();
 				break;
 
 			case IPI_CPU_STOP:
@@ -662,14 +536,13 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 static int
-on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait,
-		 cpumask_t mask)
+on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
 {
 	int ret = 0;
 
 	preempt_disable();
 
-	ret = smp_call_function_on_cpu(func, info, retry, wait, mask);
+	ret = smp_call_function_mask(mask, func, info, wait);
 	if (cpu_isset(smp_processor_id(), mask))
 		func(info);
 
@@ -731,14 +604,14 @@ static inline void ipi_flush_tlb_kernel_range(void *arg)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1);
+	on_each_cpu(ipi_flush_tlb_all, NULL, 1);
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
 	cpumask_t mask = mm->cpu_vm_mask;
 
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@@ -749,7 +622,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	ta.ta_vma = vma;
 	ta.ta_start = uaddr;
 
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -758,7 +631,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 
 	ta.ta_start = kaddr;
 
-	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1);
+	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
@@ -771,7 +644,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 	ta.ta_start = start;
 	ta.ta_end = end;
 
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -781,5 +654,5 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	ta.ta_start = start;
 	ta.ta_end = end;
 
-	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1);
+	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
 }
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index ae31deb2d065..fc650f64df43 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -36,6 +36,7 @@ EXPORT_SYMBOL(walk_stackframe);
 #ifdef CONFIG_STACKTRACE
 struct stack_trace_data {
 	struct stack_trace *trace;
+	unsigned int no_sched_functions;
 	unsigned int skip;
 };
 
@@ -43,27 +44,53 @@ static int save_trace(struct stackframe *frame, void *d)
 {
 	struct stack_trace_data *data = d;
 	struct stack_trace *trace = data->trace;
+	unsigned long addr = frame->lr;
 
+	if (data->no_sched_functions && in_sched_functions(addr))
+		return 0;
 	if (data->skip) {
 		data->skip--;
 		return 0;
 	}
 
-	trace->entries[trace->nr_entries++] = frame->lr;
+	trace->entries[trace->nr_entries++] = addr;
 
 	return trace->nr_entries >= trace->max_entries;
 }
 
-void save_stack_trace(struct stack_trace *trace)
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	struct stack_trace_data data;
 	unsigned long fp, base;
 
 	data.trace = trace;
 	data.skip = trace->skip;
-	base = (unsigned long)task_stack_page(current);
-	asm("mov %0, fp" : "=r" (fp));
+	base = (unsigned long)task_stack_page(tsk);
+
+	if (tsk != current) {
+#ifdef CONFIG_SMP
+		/*
+		 * What guarantees do we have here that 'tsk'
+		 * is not running on another CPU?
+		 */
+		BUG();
+#else
+		data.no_sched_functions = 1;
+		fp = thread_saved_fp(tsk);
+#endif
+	} else {
+		data.no_sched_functions = 0;
+		asm("mov %0, fp" : "=r" (fp));
+	}
 
 	walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	save_stack_trace_tsk(current, trace);
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
 #endif
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index b5867eca1d0b..368d171754cf 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -130,7 +130,9 @@ static const struct leds_evt_name evt_names[] = {
 	{ "red",   led_red_on,   led_red_off   },
 };
 
-static ssize_t leds_store(struct sys_device *dev, const char *buf, size_t size)
+static ssize_t leds_store(struct sys_device *dev,
+			struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	int ret = -EINVAL, len = strcspn(buf, " ");
 
@@ -365,108 +367,6 @@ static struct sysdev_class timer_sysclass = {
 	.resume		= timer_resume,
 };
 
-#ifdef CONFIG_NO_IDLE_HZ
-static int timer_dyn_tick_enable(void)
-{
-	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-	unsigned long flags;
-	int ret = -ENODEV;
-
-	if (dyn_tick) {
-		spin_lock_irqsave(&dyn_tick->lock, flags);
-		ret = 0;
-		if (!(dyn_tick->state & DYN_TICK_ENABLED)) {
-			ret = dyn_tick->enable();
-
-			if (ret == 0)
-				dyn_tick->state |= DYN_TICK_ENABLED;
-		}
-		spin_unlock_irqrestore(&dyn_tick->lock, flags);
-	}
-
-	return ret;
-}
-
-static int timer_dyn_tick_disable(void)
-{
-	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-	unsigned long flags;
-	int ret = -ENODEV;
-
-	if (dyn_tick) {
-		spin_lock_irqsave(&dyn_tick->lock, flags);
-		ret = 0;
-		if (dyn_tick->state & DYN_TICK_ENABLED) {
-			ret = dyn_tick->disable();
-
-			if (ret == 0)
-				dyn_tick->state &= ~DYN_TICK_ENABLED;
-		}
-		spin_unlock_irqrestore(&dyn_tick->lock, flags);
-	}
-
-	return ret;
-}
-
-/*
- * Reprogram the system timer for at least the calculated time interval.
- * This function should be called from the idle thread with IRQs disabled,
- * immediately before sleeping.
- */
-void timer_dyn_reprogram(void)
-{
-	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-	unsigned long next, seq, flags;
-
-	if (!dyn_tick)
-		return;
-
-	spin_lock_irqsave(&dyn_tick->lock, flags);
-	if (dyn_tick->state & DYN_TICK_ENABLED) {
-		next = next_timer_interrupt();
-		do {
-			seq = read_seqbegin(&xtime_lock);
-			dyn_tick->reprogram(next - jiffies);
-		} while (read_seqretry(&xtime_lock, seq));
-	}
-	spin_unlock_irqrestore(&dyn_tick->lock, flags);
-}
-
-static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
-{
-	return sprintf(buf, "%i\n",
-		       (system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1);
-}
-
-static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf,
-				  size_t count)
-{
-	unsigned int enable = simple_strtoul(buf, NULL, 2);
-
-	if (enable)
-		timer_dyn_tick_enable();
-	else
-		timer_dyn_tick_disable();
-
-	return count;
-}
-static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick);
-
-/*
- * dyntick=enable|disable
- */
-static char dyntick_str[4] __initdata = "";
-
-static int __init dyntick_setup(char *str)
-{
-	if (str)
-		strlcpy(dyntick_str, str, sizeof(dyntick_str));
-	return 1;
-}
-
-__setup("dyntick=", dyntick_setup);
-#endif
-
 static int __init timer_init_sysfs(void)
 {
 	int ret = sysdev_class_register(&timer_sysclass);
@@ -475,19 +375,6 @@ static int __init timer_init_sysfs(void)
 		ret = sysdev_register(&system_timer->dev);
 	}
 
-#ifdef CONFIG_NO_IDLE_HZ
-	if (ret == 0 && system_timer->dyn_tick) {
-		ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick);
-
-		/*
-		 * Turn on dynamic tick after calibrate delay
-		 * for correct bogomips
-		 */
-		if (ret == 0 && dyntick_str[0] == 'e')
-			ret = timer_dyn_tick_enable();
-	}
-#endif
-
 	return ret;
 }
 
@@ -500,10 +387,5 @@ void __init time_init(void)
 		system_timer->offset = dummy_gettimeoffset;
 #endif
 	system_timer->init();
-
-#ifdef CONFIG_NO_IDLE_HZ
-	if (system_timer->dyn_tick)
-		spin_lock_init(&system_timer->dyn_tick->lock);
-#endif
 }
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 5595fdd75e82..7277aef83098 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -708,6 +708,11 @@ EXPORT_SYMBOL(abort);
 
 void __init trap_init(void)
 {
+	return;
+}
+
+void __init early_trap_init(void)
+{
 	unsigned long vectors = CONFIG_VECTORS_BASE;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index cab355c0c1f7..139cce646055 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -13,14 +13,6 @@
  */
 
 /*
- * This can be used to enable code to cacheline align the source pointer.
- * Experiments on tested architectures (StrongARM and XScale) didn't show
- * this a worthwhile thing to do.  That might be different in the future.
- */
-//#define CALGN(code...)	code
-#define CALGN(code...)
-
-/*
  * Theory of operation
  * -------------------
  *
@@ -82,7 +74,7 @@
 		stmfd	sp!, {r5 - r8}
 		blt	5f
 
-	CALGN(	ands	ip, r1, #31		)
+	CALGN(	ands	ip, r0, #31		)
 	CALGN(	rsb	r3, ip, #32		)
 	CALGN(	sbcnes	r4, r3, r2		)  @ C is always set here
 	CALGN(	bcs	2f			)
@@ -168,7 +160,7 @@
 		subs	r2, r2, #28
 		blt	14f
 
-	CALGN(	ands	ip, r1, #31		)
+	CALGN(	ands	ip, r0, #31		)
 	CALGN(	rsb	ip, ip, #32		)
 	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
 	CALGN(	subcc	r2, r2, ip		)
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index ef7fddc14ac9..2e301b7bd8f1 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -13,14 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-/*
- * This can be used to enable code to cacheline align the source pointer.
- * Experiments on tested architectures (StrongARM and XScale) didn't show
- * this a worthwhile thing to do.  That might be different in the future.
- */
-//#define CALGN(code...)        code
-#define CALGN(code...)
-
 		.text
 
 /*
@@ -55,11 +47,12 @@ ENTRY(memmove)
 		stmfd	sp!, {r5 - r8}
 		blt	5f
 
-	CALGN(	ands	ip, r1, #31		)
+	CALGN(	ands	ip, r0, #31		)
 	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
 	CALGN(	bcs	2f			)
 	CALGN(	adr	r4, 6f			)
 	CALGN(	subs	r2, r2, ip		)  @ C is set here
+	CALGN(	rsb	ip, ip, #32		)
 	CALGN(	add	pc, r4, ip		)
 
 	PLD(	pld	[r1, #-4]		)
@@ -138,8 +131,7 @@ ENTRY(memmove)
 		subs	r2, r2, #28
 		blt	14f
 
-	CALGN(	ands	ip, r1, #31		)
-	CALGN(	rsb	ip, ip, #32		)
+	CALGN(	ands	ip, r0, #31		)
 	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
 	CALGN(	subcc	r2, r2, ip		)
 	CALGN(	bcc	15f			)
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index 95b110b07a89..b477d4ac88ef 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -39,6 +39,9 @@ ENTRY(memset)
 	mov	r3, r1
 	cmp	r2, #16
 	blt	4f
+
+#if ! CALGN(1)+0
+
 /*
  * We need an extra register for this loop - save the return address and
  * use the LR
@@ -64,6 +67,49 @@ ENTRY(memset)
 	stmneia	r0!, {r1, r3, ip, lr}
 	ldr	lr, [sp], #4
 
+#else
+
+/*
+ * This version aligns the destination pointer in order to write
+ * whole cache lines at once.
+ */
+
+	stmfd	sp!, {r4-r7, lr}
+	mov	r4, r1
+	mov	r5, r1
+	mov	r6, r1
+	mov	r7, r1
+	mov	ip, r1
+	mov	lr, r1
+
+	cmp	r2, #96
+	tstgt	r0, #31
+	ble	3f
+
+	and	ip, r0, #31
+	rsb	ip, ip, #32
+	sub	r2, r2, ip
+	movs	ip, ip, lsl #(32 - 4)
+	stmcsia	r0!, {r4, r5, r6, r7}
+	stmmiia	r0!, {r4, r5}
+	tst	ip, #(1 << 30)
+	mov	ip, r1
+	strne	r1, [r0], #4
+
+3:	subs	r2, r2, #64
+	stmgeia	r0!, {r1, r3-r7, ip, lr}
+	stmgeia	r0!, {r1, r3-r7, ip, lr}
+	bgt	3b
+	ldmeqfd	sp!, {r4-r7, pc}
+
+	tst	r2, #32
+	stmneia	r0!, {r1, r3-r7, ip, lr}
+	tst	r2, #16
+	stmneia	r0!, {r4-r7}
+	ldmfd	sp!, {r4-r7, lr}
+
+#endif
+
 4:	tst	r2, #8
 	stmneia	r0!, {r1, r3}
 	tst	r2, #4
diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S
index abf2508e8221..b8f79d80ee9b 100644
--- a/arch/arm/lib/memzero.S
+++ b/arch/arm/lib/memzero.S
@@ -39,6 +39,9 @@ ENTRY(__memzero)
  */
 	cmp	r1, #16			@ 1 we can skip this chunk if we
 	blt	4f			@ 1 have < 16 bytes
+
+#if ! CALGN(1)+0
+
 /*
  * We need an extra register for this loop - save the return address and
  * use the LR
@@ -64,6 +67,47 @@ ENTRY(__memzero)
 	stmneia	r0!, {r2, r3, ip, lr}	@ 4
 	ldr	lr, [sp], #4		@ 1
 
+#else
+
+/*
+ * This version aligns the destination pointer in order to write
+ * whole cache lines at once.
+ */
+
+	stmfd	sp!, {r4-r7, lr}
+	mov	r4, r2
+	mov	r5, r2
+	mov	r6, r2
+	mov	r7, r2
+	mov	ip, r2
+	mov	lr, r2
+
+	cmp	r1, #96
+	andgts	ip, r0, #31
+	ble	3f
+
+	rsb	ip, ip, #32
+	sub	r1, r1, ip
+	movs	ip, ip, lsl #(32 - 4)
+	stmcsia	r0!, {r4, r5, r6, r7}
+	stmmiia	r0!, {r4, r5}
+	movs	ip, ip, lsl #2
+	strcs	r2, [r0], #4
+
+3:	subs	r1, r1, #64
+	stmgeia	r0!, {r2-r7, ip, lr}
+	stmgeia	r0!, {r2-r7, ip, lr}
+	bgt	3b
+	ldmeqfd	sp!, {r4-r7, pc}
+
+	tst	r1, #32
+	stmneia	r0!, {r2-r7, ip, lr}
+	tst	r1, #16
+	stmneia	r0!, {r4-r7}
+	ldmfd	sp!, {r4-r7, lr}
+
+#endif
+
 4:	tst	r1, #8			@ 1 8 bytes or more?
 	stmneia	r0!, {r2, r3}		@ 2
 	tst	r1, #4			@ 1 4 bytes or more?
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0fc07b6db749..5bad6b9b00d7 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -30,6 +30,11 @@ config ARCH_AT91SAM9RL
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G20
+	bool "AT91SAM9G20"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select GENERIC_TIME
@@ -126,6 +131,12 @@ config MACH_ECBAT91
 	  Select this if you are using emQbit's ECB_AT91 board.
 	  <http://wiki.emqbit.com/free-ecb-at91>
 
+config MACH_YL9200
+	bool "ucDragon YL-9200"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using the ucDragon YL-9200 board.
+
 endif
 
 # ----------------------------------------------------------
@@ -164,6 +175,20 @@ config MACH_SAM9_L9260
 	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 	  <http://www.olimex.com/dev/sam9-L9260.html>
 
+config MACH_USB_A9260
+	bool "CALAO USB-A9260"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using a Calao Systems USB-A9260.
+	  <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+	bool "CALAO QIL-A9260 board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using a Calao Systems QIL-A9260 Board.
+	  <http://www.calao-systems.com>
+
 endif
 
 # ----------------------------------------------------------
@@ -194,6 +219,13 @@ config MACH_AT91SAM9263EK
 	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 
+config MACH_USB_A9263
+	bool "CALAO USB-A9263"
+	depends on ARCH_AT91SAM9263
+	help
+	  Select this if you are using a Calao Systems USB-A9263.
+	  <http://www.calao-systems.com>
+
 endif
 
 # ----------------------------------------------------------
@@ -212,6 +244,20 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91CAP9
 
 comment "AT91CAP9 Board Type"
@@ -247,13 +293,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_AT91_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -302,15 +348,15 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
 	bool "USART3"
-	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260)
+	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
 
 config AT91_EARLY_USART4
 	bool "USART4"
-	depends on ARCH_AT91SAM9260
+	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
 
 config AT91_EARLY_USART5
 	bool "USART5"
-	depends on ARCH_AT91SAM9260
+	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
 
 endchoice
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8d9bc0153b18..7d641f97516b 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_d
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
@@ -30,21 +31,28 @@ obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
 obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
 obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
 obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
+obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
 obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
 obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
+obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
+obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a9263.o
 
 # AT91SAM9RL board-specific support
 obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
+# AT91SAM9G20 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
 
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index be526746e01e..747b9dedab88 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -84,6 +84,105 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+
+static struct resource usba_udc_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_UDPHS_FIFO,
+		.end	= AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_BASE_UDPHS,
+		.end	= AT91CAP9_BASE_UDPHS + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91CAP9_ID_UDPHS,
+		.end	= AT91CAP9_ID_UDPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data usba_udc_ep[] = {
+	EP("ep0", 0,   64, 1, 0, 0),
+	EP("ep1", 1, 1024, 3, 1, 1),
+	EP("ep2", 2, 1024, 3, 1, 1),
+	EP("ep3", 3, 1024, 2, 1, 1),
+	EP("ep4", 4, 1024, 2, 1, 1),
+	EP("ep5", 5, 1024, 2, 1, 0),
+	EP("ep6", 6, 1024, 2, 1, 0),
+	EP("ep7", 7, 1024, 2, 0, 0),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+	struct usba_platform_data pdata;
+	struct usba_ep_data ep[8];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+	.name		= "atmel_usba_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &usba_udc_data.pdata,
+	},
+	.resource	= usba_udc_resources,
+	.num_resources	= ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+	at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
+					  AT91_MATRIX_UDPHS_BYPASS_LOCK);
+
+	/*
+	 * Invalid pins are 0 on AT91, but the usba driver is shared
+	 * with AVR32, which use negative values instead. Once/if
+	 * gpio_is_valid() is ported to AT91, revisit this code.
+	 */
+	usba_udc_data.pdata.vbus_pin = -EINVAL;
+	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+	if (data && data->vbus_pin > 0) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	/* Clocks */
+	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+	platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  Ethernet
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index ee26550cdc21..380f12a12200 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -47,6 +47,20 @@ static struct map_desc at91sam9260_sram_desc[] __initdata = {
 	}
 };
 
+static struct map_desc at91sam9g20_sram_desc[] __initdata = {
+	{
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G20_SRAM0_BASE),
+		.length		= AT91SAM9G20_SRAM0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE - AT91SAM9G20_SRAM1_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G20_SRAM1_BASE),
+		.length		= AT91SAM9G20_SRAM1_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
 static struct map_desc at91sam9xe_sram_desc[] __initdata = {
 	{
 		.pfn		= __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
@@ -307,6 +321,8 @@ void __init at91sam9260_initialize(unsigned long main_clock)
 
 	if (cpu_is_at91sam9xe())
 		at91sam9xe_initialize();
+	else if (cpu_is_at91sam9g20())
+		iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc));
 	else
 		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 393a32aefce5..86cba4ac29b1 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -18,6 +18,7 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91sam9260_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
@@ -320,20 +321,41 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
-	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	if (cpu_is_at91sam9260()) {
+		/* Timing for sam9260 */
+		/* set the bus interface characteristics */
+		at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+				| AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+		at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+				| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+		at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
 
-	if (data->bus_width_16)
-		mode = AT91_SMC_DBW_16;
-	else
-		mode = AT91_SMC_DBW_8;
-	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+		if (data->bus_width_16)
+			mode = AT91_SMC_DBW_16;
+		else
+			mode = AT91_SMC_DBW_8;
+		at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+	}
+
+	if (cpu_is_at91sam9g20()) {
+		/* Timing for sam9g20 */
+		/* set the bus interface characteristics */
+		at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0)
+				| AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+
+		at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(4)
+				| AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(4));
+
+		at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+		if (data->bus_width_16)
+			mode = AT91_SMC_DBW_16;
+		else
+			mode = AT91_SMC_DBW_8;
+		at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(3));
+	}
 
 	/* enable pin */
 	if (data->enable_pin)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 0babb645b83c..ec1891375dfb 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -232,19 +232,19 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
 	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
 
 	if (data->bus_width_16)
 		mode = AT91_SMC_DBW_16;
 	else
 		mode = AT91_SMC_DBW_8;
-	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
 
 	/* enable pin */
 	if (data->enable_pin)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 719667e25c98..8a81f76f0200 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -391,8 +391,8 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 
 	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 
 	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
 			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 450db304936f..ae28101e7542 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -26,6 +26,101 @@
 
 
 /* --------------------------------------------------------------------
+ *  USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+
+static struct resource usba_udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_UDPHS_FIFO,
+		.end	= AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_BASE_UDPHS,
+		.end	= AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9RL_ID_UDPHS,
+		.end	= AT91SAM9RL_ID_UDPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+	EP("ep0", 0, 64, 1, 0, 0),
+	EP("ep1", 1, 1024, 2, 1, 1),
+	EP("ep2", 2, 1024, 2, 1, 1),
+	EP("ep3", 3, 1024, 3, 1, 0),
+	EP("ep4", 4, 1024, 3, 1, 0),
+	EP("ep5", 5, 1024, 3, 1, 1),
+	EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+	struct usba_platform_data pdata;
+	struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+	.name		= "atmel_usba_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &usba_udc_data.pdata,
+	},
+	.resource	= usba_udc_resources,
+	.num_resources	= ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+	/*
+	 * Invalid pins are 0 on AT91, but the usba driver is shared
+	 * with AVR32, which use negative values instead. Once/if
+	 * gpio_is_valid() is ported to AT91, revisit this code.
+	 */
+	usba_udc_data.pdata.vbus_pin = -EINVAL;
+	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+	if (data && data->vbus_pin > 0) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	/* Clocks */
+	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+	platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
@@ -138,15 +233,15 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
 	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
 
-	at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+	at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
 
 	/* enable pin */
 	if (data->enable_pin)
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index e5512d1ff217..8a2a958639db 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -78,6 +78,12 @@ static struct at91_usbh_data __initdata cap9adk_usbh_data = {
 	.ports		= 2,
 };
 
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
+	.vbus_pin	= AT91_PIN_PB31,
+};
 
 /*
  * ADS7846 Touchscreen
@@ -326,6 +332,9 @@ static void __init cap9adk_board_init(void)
 	/* USB Host */
 	set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
 	at91_add_device_usbh(&cap9adk_usbh_data);
+	/* USB HS */
+	set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+	at91_add_device_usba(&cap9adk_usba_udc_data);
 	/* SPI */
 	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
 	/* Touchscreen */
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 0f0878294a67..9854fc3dd1f2 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -40,24 +40,21 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata carmeva_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init carmeva_map_io(void)
 {
 	/* Initialize processor: 20.000 MHz crystal */
 	at91rm9200_initialize(20000000, AT91RM9200_BGA);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&carmeva_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init carmeva_init_irq(void)
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 419fd19b620b..bb1a5474ddab 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -45,10 +45,10 @@ static void __init csb637_map_io(void)
 	/* Initialize processor: 3.6864 MHz crystal */
 	at91rm9200_initialize(3686400, AT91RM9200_BGA);
 
-	/* DBGU on ttyS0 */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
-	/* make console=ttyS0 the default */
+	/* make console=ttyS0 (ie, DBGU) the default */
 	at91_set_serial_console(0);
 }
 
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index c1a813c7169b..dab958d25926 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -45,17 +45,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata dk_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init dk_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
@@ -64,8 +53,16 @@ static void __init dk_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&dk_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init dk_init_irq(void)
@@ -163,7 +160,7 @@ static struct at91_nand_data __initdata dk_nand_data = {
 #define DK_FLASH_SIZE	0x200000
 
 static struct physmap_flash_data dk_flash_data = {
-	.width	= 2,
+	.width		= 2,
 };
 
 static struct resource dk_flash_resource = {
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index af1a1d8ecc30..3fe054e0056b 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -40,24 +40,24 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata eb9200_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init eb9200_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000, AT91RM9200_BGA);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&eb9200_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			| ATMEL_UART_RI);
+
+	/* USART2 on ttyS2. (Rx, Tx) - IRDA */
+	at91_register_uart(AT91RM9200_ID_US2, 2, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init eb9200_init_irq(void)
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 0574e50a30dd..74aa4325eab3 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -45,17 +45,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init ek_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
@@ -64,8 +53,16 @@ static void __init ek_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&ek_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init ek_init_irq(void)
@@ -122,7 +119,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 #define EK_FLASH_SIZE	0x200000
 
 static struct physmap_flash_data ek_flash_data = {
-	.width	= 2,
+	.width		= 2,
 };
 
 static struct resource ek_flash_resource = {
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 4b39b9cda75b..cb065febd95e 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -37,19 +37,10 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
-#include "generic.h"
+#include <asm/arch/at91rm9200_mc.h>
 
+#include "generic.h"
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kb9202_uart_config = {
-	.console_tty	= 0,					/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 4, 0, 1, -1, -1 }			/* ttyS0, ..., ttyS4 */
-};
 
 static void __init kb9202_map_io(void)
 {
@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void)
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&kb9202_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx & Tx only) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+	/* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+	/* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init kb9202_init_irq(void)
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
new file mode 100644
index 000000000000..99b4ec3818d6
--- /dev/null
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -0,0 +1,255 @@
+/*
+ * linux/arch/arm/mach-at91/board-qil-a9260.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2007 Calao-systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_shdwc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 12.000 MHz crystal */
+	at91sam9260_initialize(12000000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS1 (ie, USART0) */
+	at91_set_serial_console(1);
+
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if defined(CONFIG_RTC_DRV_M41T94)
+	{	/* M41T94 RTC */
+		.modalias	= "m41t94",
+		.chip_select	= 0,
+		.max_speed_hz	= 1 * 1000 * 1000,
+		.bus_num	= 0,
+	}
+#endif
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA31,
+	.is_rmii	= 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Uboot & Kernel",
+		.offset	= 0x00000000,
+		.size	= 16 * 1024 * 1024,
+	},
+	{
+		.name	= "Root FS",
+		.offset	= 0x01000000,
+		.size	= 120 * 1024 * 1024,
+	},
+	{
+		.name	= "FS",
+		.offset	= 0x08800000,
+		.size	= 120 * 1024 * 1024,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+//	.det_pin	= ... not connected
+//	.wp_pin		= ... not connected
+//	.vcc_pin	= ... not connected
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{	/* USER PUSH BUTTON */
+		.code		= KEY_ENTER,
+		.gpio		= AT91_PIN_PB10,
+		.active_low	= 1,
+		.desc		= "user_pb",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
+	at91_set_deglitch(AT91_PIN_PB10, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* user_led (green) */
+		.name			= "user_led",
+		.gpio			= AT91_PIN_PB21,
+		.active_low		= 0,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* MMC */
+	at91_add_device_mmc(0, &ek_mmc_data);
+	/* Push Buttons */
+	ek_add_device_buttons();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* shutdown controller, wakeup button (5 msec low) */
+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+				| AT91_SHDW_RTTWKEN);
+}
+
+MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
+	/* Maintainer: calao-systems */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
new file mode 100644
index 000000000000..45617c201240
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -0,0 +1,218 @@
+/*
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2008 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/at73c213.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA7,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name   = "Bootstrap",
+		.offset = 0,
+		.size   = 4 * 1024 * 1024,
+	},
+	{
+		.name	= "Partition 1",
+		.offset	= 4 * 1024 * 1024,
+		.size	= 60 * 1024 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 64 * 1024 * 1024,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.slot_b		= 1,
+	.wire4		= 1,
+};
+
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds5",
+		.gpio			= AT91_PIN_PA6,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PA9,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* MMC */
+	at91_add_device_mmc(0, &ek_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
+
+MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index ffc0597aee8d..b6a70fc735c3 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -56,6 +56,14 @@ static void __init ek_init_irq(void)
 
 
 /*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+	.vbus_pin	= AT91_PIN_PA8,
+};
+
+
+/*
  * MCI (SD/MMC)
  */
 static struct at91_mmc_data __initdata ek_mmc_data = {
@@ -175,6 +183,8 @@ static void __init ek_board_init(void)
 {
 	/* Serial */
 	at91_add_device_serial();
+	/* USB HS */
+	at91_add_device_usba(&ek_usba_udc_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* NAND */
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
new file mode 100644
index 000000000000..837aedf8ffeb
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -0,0 +1,215 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9260.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2007 Calao-systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_shdwc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 12.000 MHz crystal */
+	at91sam9260_initialize(12000000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA31,
+	.is_rmii	= 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Uboot & Kernel",
+		.offset	= 0x00000000,
+		.size	= 16 * 1024 * 1024,
+	},
+	{
+		.name	= "Root FS",
+		.offset	= 0x01000000,
+		.size	= 120 * 1024 * 1024,
+	},
+	{
+		.name	= "FS",
+		.offset	= 0x08800000,
+		.size	= 120 * 1024 * 1024,
+	}
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+/*
+ * GPIO Buttons
+ */
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{	/* USER PUSH BUTTON */
+		.code		= KEY_ENTER,
+		.gpio		= AT91_PIN_PB10,
+		.active_low	= 1,
+		.desc		= "user_pb",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
+	at91_set_deglitch(AT91_PIN_PB10, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* user_led (green) */
+		.name			= "user_led",
+		.gpio			= AT91_PIN_PB21,
+		.active_low		= 0,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* Push Buttons */
+	ek_add_device_buttons();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* shutdown controller, wakeup button (5 msec low) */
+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+				| AT91_SHDW_RTTWKEN);
+}
+
+MACHINE_START(USB_A9260, "CALAO USB_A9260")
+	/* Maintainer: calao-systems */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
new file mode 100644
index 000000000000..95800d32bd49
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -0,0 +1,230 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9263.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation.
+ *  Copyright (C) 2007 Calao-systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_shdwc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 12.00 MHz crystal */
+	at91sam9263_initialize(12000000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PB11,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	}
+#endif
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PE31,
+	.is_rmii	= 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Linux Kernel",
+		.offset	= 0x00000000,
+		.size	= 16 * 1024 * 1024,
+	},
+	{
+		.name	= "Root FS",
+		.offset	= 0x01000000,
+		.size	= 120 * 1024 * 1024,
+	},
+	{
+		.name	= "FS",
+		.offset	= 0x08800000,
+		.size	= 120 * 1024 * 1024,
+	}
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PA22,
+	.enable_pin	= AT91_PIN_PD15,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{	/* USER PUSH BUTTON */
+		.code		= KEY_ENTER,
+		.gpio		= AT91_PIN_PB10,
+		.active_low	= 1,
+		.desc		= "user_pb",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
+	at91_set_deglitch(AT91_PIN_PB10, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* user_led (green) */
+		.name			= "user_led",
+		.gpio			= AT91_PIN_PB21,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* Push Buttons */
+	ek_add_device_buttons();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* shutdown controller, wakeup button (5 msec low) */
+	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+				| AT91_SHDW_RTTWKEN);
+}
+
+MACHINE_START(USB_A9263, "CALAO USB_A9263")
+	/* Maintainer: calao-systems */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index b5717108991d..7079050ab88d 100755
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -1,11 +1,10 @@
 /*
  * linux/arch/arm/mach-at91/board-yl-9200.c
  *
- * Adapted from:
- *various board files in
- * /arch/arm/mach-at91
- * modifications  to convert to  YL-9200 platform
- *  Copyright (C) 2007 S.Birtles
+ * Adapted from various board files in arch/arm/mach-at91
+ *
+ * Modifications for YL-9200 platform:
+ *  Copyright (C) 2007 S. Birtles
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,13 +25,14 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-/*#include <linux/can_bus/candata.h>*/
 #include <linux/spi/ads7846.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 
-/*#include <sound/gpio_sounder.h>*/
 #include <asm/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -45,179 +45,108 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91rm9200_mc.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
 
 #include "generic.h"
-#include <asm/arch/at91_pio.h>
 
-#define YL_9200_FLASH_BASE	AT91_CHIPSELECT_0
-#define YL_9200_FLASH_SIZE	0x800000
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- *atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL
- *atmel_usart.1: ttyS1 at MMIO 0xfffc0000 (irq = 6) is a ATMEL_SERIAL
- *atmel_usart.2: ttyS2 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL
- *atmel_usart.3: ttyS3 at MMIO 0xfffc8000 (irq = 8) is a ATMEL_SERIAL
- *atmel_usart.4: ttyS4 at MMIO 0xfffcc000 (irq = 9) is a ATMEL_SERIAL
- * on the YL-9200 we are sitting at the following
- *ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL
- *ttyS1 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL
- */
+static void __init yl9200_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
 
-/* extern void __init yl_9200_add_device_sounder(struct gpio_sounder *sounders, int nr);*/
+	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
 
-static struct at91_uart_config __initdata yl_9200_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 4, 1, 0, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 
-static void __init yl_9200_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	/*Also initialises register clocks & gpio*/
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			| ATMEL_UART_RI);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&yl_9200_uart_config);
+	/* USART0 on ttyS2. (Rx & Tx only to JP3) */
+	at91_register_uart(AT91RM9200_ID_US0, 2, 0);
 
-	/* Setup the LEDs D2=PB17,D3=PB16 */
-	at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/
+	/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
-static void __init yl_9200_init_irq(void)
+static void __init yl9200_init_irq(void)
 {
 	at91rm9200_init_interrupts(NULL);
 }
 
-static struct at91_eth_data __initdata yl_9200_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PB28,
-	.is_rmii	= 1,
-};
 
-static struct at91_usbh_data __initdata yl_9200_usbh_data = {
-	.ports		= 1,  /* this should be 1 not 2 for the Yl9200*/
+/*
+ * LEDs
+ */
+static struct gpio_led yl9200_leds[] = {
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PB17,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	},
+	{	/* D3 */
+		.name			= "led3",
+		.gpio			= AT91_PIN_PB16,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D4 */
+		.name			= "led4",
+		.gpio			= AT91_PIN_PB15,
+		.active_low		= 1,
+	},
+	{	/* D5 */
+		.name			= "led5",
+		.gpio			= AT91_PIN_PB8,
+		.active_low		= 1,
+	}
 };
 
-static struct at91_udc_data __initdata yl_9200_udc_data = {
-/*on sheet 7 Schemitic rev 1.0*/
-	.pullup_pin	= AT91_PIN_PC4,
-	.vbus_pin=  AT91_PIN_PC5,
-	.pullup_active_low = 1, /*ACTIVE LOW!! due to PNP transistor on page 7*/
-
-};
 /*
-static struct at91_cf_data __initdata yl_9200_cf_data = {
-TODO S.BIRTLES
-	.det_pin	= AT91_PIN_xxx,
-	.rst_pin	= AT91_PIN_xxx,
-	.irq_pin	= ... not connected
-	.vcc_pin	= ... always powered
-
+ * Ethernet
+ */
+static struct at91_eth_data __initdata yl9200_eth_data = {
+	.phy_irq_pin		= AT91_PIN_PB28,
+	.is_rmii		= 1,
 };
-*/
-static struct at91_mmc_data __initdata yl_9200_mmc_data = {
-	.det_pin	= AT91_PIN_PB9, /*THIS LOOKS CORRECT SHEET7*/
-/*	.wp_pin		= ... not connected  SHEET7*/
-	.slot_b		= 0,
-	.wire4		= 1,
 
+/*
+ * USB Host
+ */
+static struct at91_usbh_data __initdata yl9200_usbh_data = {
+	.ports			= 1,	/* PQFP version of AT91RM9200 */
 };
 
-/* --------------------------------------------------------------------
- *  Touch screen
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-	return !at91_get_gpio_value(AT91_PIN_PB11);	/* Touchscreen PENIRQ */
-}
-
-static void __init at91_init_device_ts(void)
-{
-/*IMPORTANT NOTE THE SPI INTERFACE IS ALREADY CONFIGURED BY XXX_DEVICES.C
-THAT IS TO SAY THAT  MISO,MOSI,SPCK AND CS  are already configured
-we only need to enable the other datapins which are:
-PB10/RK1 BUSY
-*/
-/* Touchscreen BUSY signal ,  pin,use pullup ( TODO not currently used in the ADS7843/6.c driver)*/
-at91_set_gpio_input(AT91_PIN_PB10, 1);
-}
-
-#else
-static void __init at91_init_device_ts(void) {}
-#endif
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7843,
-	.x_min			= 150,
-	.x_max			= 3830,
-	.y_min			= 190,
-	.y_max			= 3830,
-	.vref_delay_usecs	= 100,
-/* for a 8" touch screen*/
-	//.x_plate_ohms		= 603, //= 450, S.Birtles TODO
-	//.y_plate_ohms		= 332, //= 250, S.Birtles TODO
-/*for a 10.4" touch screen*/
-	//.x_plate_ohms		=611,
-	//.y_plate_ohms		=325,
-
-	.x_plate_ohms	= 576,
-	.y_plate_ohms	= 366,
-		//
-	.pressure_max		= 15000, /*generally nonsense on the 7843*/
-	 /*number of times to send query to chip in a given run 0 equals one time (do not set to 0!! ,there is a bug in ADS 7846 code)*/
-	.debounce_max		= 1,
-	.debounce_rep		= 0,
-	.debounce_tol		= (~0),
-	.get_pendown_state	= ads7843_pendown_state,
-};
+/*
+ * USB Device
+ */
+static struct at91_udc_data __initdata yl9200_udc_data = {
+	.pullup_pin		= AT91_PIN_PC4,
+	.vbus_pin		= AT91_PIN_PC5,
+	.pullup_active_low	= 1,	/* Active Low due to PNP transistor (pg 7) */
 
-/*static struct canbus_platform_data can_info = {
-	.model			= 2510,
 };
-*/
-
-static struct spi_board_info yl_9200_spi_devices[] = {
-/*this sticks it at:
- /sys/devices/platform/atmel_spi.0/spi0.0
- /sys/bus/platform/devices/
-Documentation/spi IIRC*/
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- /*(this IS correct 04-NOV-2007)*/
-	{
-		.modalias		= "ads7846", /* because the driver is called ads7846*/
-		.chip_select	= 0, /*THIS MUST BE AN INDEX INTO AN ARRAY OF  pins */
-/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select*/
-		/*.controller_data =AT91_PIN_PA3 ,*/
-		.max_speed_hz	= 5000*26, /*(4700 * 26)-125000 * 26, (max sample rate @ 3V) * (cmd + data + overhead) */
-		.bus_num		= 0,
-		.platform_data	= &ads_info,
-		.irq			= AT91_PIN_PB11,
-	},
-#endif
-/*we need to put our CAN driver data here!!*/
-/*THIS IS ALL DUMMY DATA*/
-/*	{
-		.modalias		= "mcp2510", //DUMMY for MCP2510 chip
-		.chip_select	= 1,*/ /*THIS MUST BE AN INDEX INTO AN ARRAY OF  pins */
-	/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select */
-	/*  .controller_data =AT91_PIN_PA4 ,
-		.max_speed_hz	= 25000 * 26,
-		.bus_num		= 0,
-		.platform_data	= &can_info,
-		.irq			= AT91_PIN_PC0,
-	},
-	*/
-	//max SPI chip needs to go here
+/*
+ * MMC
+ */
+static struct at91_mmc_data __initdata yl9200_mmc_data = {
+	.det_pin	= AT91_PIN_PB9,
+	// .wp_pin	= ... not connected
+	.wire4		= 1,
 };
 
-static struct mtd_partition __initdata yl_9200_nand_partition[] = {
+/*
+ * NAND Flash
+ */
+static struct mtd_partition __initdata yl9200_nand_partition[] = {
 	{
 		.name	= "AT91 NAND partition 1, boot",
 		.offset	= 0,
@@ -242,442 +171,434 @@ static struct mtd_partition __initdata yl_9200_nand_partition[] = {
 		.name	= "AT91 NAND partition 5, ext-fs",
 		.offset	= 32 * SZ_1M,
 		.size	= 32 * SZ_1M
-	},
+	}
 };
 
 static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
 {
-	*num_partitions = ARRAY_SIZE(yl_9200_nand_partition);
-	return yl_9200_nand_partition;
+	*num_partitions = ARRAY_SIZE(yl9200_nand_partition);
+	return yl9200_nand_partition;
 }
 
-static struct at91_nand_data __initdata yl_9200_nand_data = {
-	.ale= 6,
-	.cle= 7,
-	/*.det_pin	= AT91_PIN_PCxx,*/   /*we don't have a det pin because NandFlash is fixed to board*/
-	.rdy_pin	= AT91_PIN_PC14,  /*R/!B Sheet10*/
-	.enable_pin	= AT91_PIN_PC15,  /*!CE  Sheet10 */
+static struct at91_nand_data __initdata yl9200_nand_data = {
+	.ale		= 6,
+	.cle		= 7,
+	// .det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PC14,	/* R/!B (Sheet10) */
+	.enable_pin	= AT91_PIN_PC15,	/* !CE  (Sheet10) */
 	.partition_info	= nand_partitions,
 };
 
-
-
 /*
-TODO S.Birtles
-potentially a problem with the size above
-physmap platform flash device: 00800000 at 10000000
-physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
-NOR chip too large to fit in mapping. Attempting to cope...
- Intel/Sharp Extended Query Table at 0x0031
-Using buffer write method
-cfi_cmdset_0001: Erase suspend on write enabled
-Reducing visibility of 16384KiB chip to 8192KiB
-*/
+ * NOR Flash
+ */
+#define YL9200_FLASH_BASE	AT91_CHIPSELECT_0
+#define YL9200_FLASH_SIZE	0x1000000
 
-static struct mtd_partition yl_9200_flash_partitions[] = {
+static struct mtd_partition yl9200_flash_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
 	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x001C0000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00200000
+		.name		= "Kernel",
+		.size		= 0x001C0000,
+		.offset		= 0x00040000,
+	},
+	{
+		.name		= "Filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00200000
 	}
-
 };
 
-static struct physmap_flash_data yl_9200_flash_data = {
-	.width	= 2,
-	.parts          = yl_9200_flash_partitions,
-	.nr_parts       = ARRAY_SIZE(yl_9200_flash_partitions),
+static struct physmap_flash_data yl9200_flash_data = {
+	.width		= 2,
+	.parts		= yl9200_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(yl9200_flash_partitions),
 };
 
-static struct resource yl_9200_flash_resources[] = {
-{
-	.start		= YL_9200_FLASH_BASE,
-	.end		= YL_9200_FLASH_BASE + YL_9200_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
+static struct resource yl9200_flash_resources[] = {
+	{
+		.start	= YL9200_FLASH_BASE,
+		.end	= YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
-static struct platform_device yl_9200_flash = {
+static struct platform_device yl9200_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-				.platform_data	= &yl_9200_flash_data,
+				.platform_data	= &yl9200_flash_data,
 			},
-	.resource	= yl_9200_flash_resources,
-	.num_resources  = ARRAY_SIZE(yl_9200_flash_resources),
+	.resource	= yl9200_flash_resources,
+	.num_resources	= ARRAY_SIZE(yl9200_flash_resources),
 };
 
-
-static struct gpio_led yl_9200_leds[] = {
-/*D2 &D3 are passed directly in via at91_init_leds*/
-	{
-		.name			= "led4",  /*D4*/
-		.gpio			= AT91_PIN_PB15,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-		/*.default_trigger	= "timer",*/
-	},
-	{
-		.name			= "led5",  /*D5*/
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-//static struct gpio_sounder yl_9200_sounder[] = {*/
-/*This is a simple speaker attached to a gpo line*/
-
-//	{
-//		.name			= "Speaker",  /*LS1*/
-//		.gpio			= AT91_PIN_PA22,
-//		.active_low		= 0,
-//		.default_trigger	= "heartbeat",
-		/*.default_trigger	= "timer",*/
-//	},
-//};
-
-
-
-static struct i2c_board_info __initdata yl_9200_i2c_devices[] = {
-	{
-	/*TODO*/
-		I2C_BOARD_INFO("CS4334", 0x00),
+/*
+ * I2C (TWI)
+ */
+static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
+	{	/* EEPROM */
+		I2C_BOARD_INFO("24c128", 0x50),
 	}
 };
 
-
- /*
+/*
  * GPIO Buttons
- */
+*/
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button yl_9200_buttons[] = {
+static struct gpio_keys_button yl9200_buttons[] = {
 	{
 		.gpio		= AT91_PIN_PA24,
-		.code	= BTN_2,
+		.code		= BTN_2,
 		.desc		= "SW2",
 		.active_low	= 1,
 		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PB1,
-		.code	= BTN_3,
+		.code		= BTN_3,
 		.desc		= "SW3",
 		.active_low	= 1,
 		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PB2,
-		.code	= BTN_4,
+		.code		= BTN_4,
 		.desc		= "SW4",
 		.active_low	= 1,
 		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PB6,
-		.code	= BTN_5,
+		.code		= BTN_5,
 		.desc		= "SW5",
 		.active_low	= 1,
 		.wakeup		= 1,
-	},
-
+	}
 };
 
-static struct gpio_keys_platform_data yl_9200_button_data = {
-	.buttons	= yl_9200_buttons,
-	.nbuttons	= ARRAY_SIZE(yl_9200_buttons),
+static struct gpio_keys_platform_data yl9200_button_data = {
+	.buttons	= yl9200_buttons,
+	.nbuttons	= ARRAY_SIZE(yl9200_buttons),
 };
 
-static struct platform_device yl_9200_button_device = {
+static struct platform_device yl9200_button_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.num_resources	= 0,
 	.dev		= {
-	.platform_data	= &yl_9200_button_data,
+		.platform_data	= &yl9200_button_data,
 	}
 };
 
-static void __init yl_9200_add_device_buttons(void)
+static void __init yl9200_add_device_buttons(void)
 {
-	//SW2
-	at91_set_gpio_input(AT91_PIN_PA24, 0);
+	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* SW2 */
 	at91_set_deglitch(AT91_PIN_PA24, 1);
-
-	//SW3
-	at91_set_gpio_input(AT91_PIN_PB1, 0);
+	at91_set_gpio_input(AT91_PIN_PB1, 1);	/* SW3 */
 	at91_set_deglitch(AT91_PIN_PB1, 1);
-	//SW4
-	at91_set_gpio_input(AT91_PIN_PB2, 0);
+	at91_set_gpio_input(AT91_PIN_PB2, 1);	/* SW4 */
 	at91_set_deglitch(AT91_PIN_PB2, 1);
-
-	//SW5
-	at91_set_gpio_input(AT91_PIN_PB6, 0);
+	at91_set_gpio_input(AT91_PIN_PB6, 1);	/* SW5 */
 	at91_set_deglitch(AT91_PIN_PB6, 1);
 
+	/* Enable buttons (Sheet 5) */
+	at91_set_gpio_output(AT91_PIN_PB7, 1);
+
+	platform_device_register(&yl9200_button_device);
+}
+#else
+static void __init yl9200_add_device_buttons(void) {}
+#endif
+
+/*
+ * Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+	return !at91_get_gpio_value(AT91_PIN_PB11);	/* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model			= 7843,
+	.x_min			= 150,
+	.x_max			= 3830,
+	.y_min			= 190,
+	.y_max			= 3830,
+	.vref_delay_usecs	= 100,
+
+	/* For a 8" touch-screen */
+	// .x_plate_ohms		= 603,
+	// .y_plate_ohms		= 332,
+
+	/* For a 10.4" touch-screen */
+	// .x_plate_ohms		= 611,
+	// .y_plate_ohms		= 325,
+
+	.x_plate_ohms		= 576,
+	.y_plate_ohms		= 366,
+
+	.pressure_max		= 15000, /* generally nonsense on the 7843 */
+	.debounce_max		= 1,
+	.debounce_rep		= 0,
+	.debounce_tol		= (~0),
+	.get_pendown_state	= ads7843_pendown_state,
+};
 
-	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* #TURN BUTTONS ON, SHEET 5  of schematics */
-	platform_device_register(&yl_9200_button_device);
+static void __init yl9200_add_device_ts(void)
+{
+	at91_set_gpio_input(AT91_PIN_PB11, 1);	/* Touchscreen interrupt pin */
+	at91_set_gpio_input(AT91_PIN_PB10, 1);	/* Touchscreen BUSY signal - not used! */
 }
 #else
-static void __init yl_9200_add_device_buttons(void) {}
+static void __init yl9200_add_device_ts(void) {}
+#endif
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info yl9200_spi_devices[] = {
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{	/* Touchscreen */
+		.modalias	= "ads7846",
+		.chip_select	= 0,
+		.max_speed_hz	= 5000 * 26,
+		.platform_data	= &ads_info,
+		.irq		= AT91_PIN_PB11,
+	},
 #endif
+	{	/* CAN */
+		.modalias	= "mcp2510",
+		.chip_select	= 1,
+		.max_speed_hz	= 25000 * 26,
+		.irq		= AT91_PIN_PC0,
+	}
+};
 
+/*
+ * LCD / VGA
+ *
+ * EPSON S1D13806 FB (discontinued chip)
+ * EPSON S1D13506 FB
+ */
 #if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
-/* EPSON S1D13806 FB (discontinued chip)*/
-/* EPSON S1D13506 FB */
-
 #define AT91_FB_REG_BASE	0x80000000L
 #define AT91_FB_REG_SIZE	0x200
 #define AT91_FB_VMEM_BASE	0x80200000L
 #define AT91_FB_VMEM_SIZE	0x200000L
 
-/*#define S1D_DISPLAY_WIDTH           640*/
-/*#define S1D_DISPLAY_HEIGHT          480*/
-
-
-static void __init yl_9200_init_video(void)
+static void __init yl9200_init_video(void)
 {
-	at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6);
-	at91_sys_write(AT91_PIOC + PIO_BSR,0);
-	at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6);
-
-	at91_sys_write( AT91_SMC_CSR(2),
-	AT91_SMC_NWS_(0x4) |
-	AT91_SMC_WSEN |
-	AT91_SMC_TDF_(0x100) |
-	AT91_SMC_DBW
-	);
-
-
+	/* NWAIT Signal */
+	at91_set_A_periph(AT91_PIN_PC6, 0);
 
+	/* Initialization of the Static Memory Controller for Chip Select 2 */
+	at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16		/* 16 bit */
+			| AT91_SMC_WSEN | AT91_SMC_NWS_(0x4)	/* wait states */
+			| AT91_SMC_TDF_(0x100)			/* float time */
+	);
 }
 
-
-static struct s1d13xxxfb_regval yl_9200_s1dfb_initregs[] =
+static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
 {
-	{S1DREG_MISC,				0x00},   /* Miscellaneous Register*/
-	{S1DREG_COM_DISP_MODE,		0x01},   /* Display Mode Register, LCD only*/
-	{S1DREG_GPIO_CNF0,			0x00},   /* General IO Pins Configuration Register*/
-	{S1DREG_GPIO_CTL0,			0x00},   /* General IO Pins Control Register*/
-	{S1DREG_CLK_CNF,			0x11},   /* Memory Clock Configuration Register*/
-	{S1DREG_LCD_CLK_CNF,		0x10},   /* LCD Pixel Clock Configuration Register*/
-	{S1DREG_CRT_CLK_CNF,		0x12},   /* CRT/TV Pixel Clock Configuration Register*/
-	{S1DREG_MPLUG_CLK_CNF,		0x01},   /* MediaPlug Clock Configuration Register*/
-	{S1DREG_CPU2MEM_WST_SEL,	0x02},   /* CPU To Memory Wait State Select Register*/
-	{S1DREG_MEM_CNF,			0x00},   /* Memory Configuration Register*/
-	{S1DREG_SDRAM_REF_RATE,		0x04},   /* DRAM Refresh Rate Register, MCLK source*/
-	{S1DREG_SDRAM_TC0,			0x12},   /* DRAM Timings Control Register 0*/
-	{S1DREG_SDRAM_TC1,			0x02},   /* DRAM Timings Control Register 1*/
-	{S1DREG_PANEL_TYPE,			0x25},   /* Panel Type Register*/
-	{S1DREG_MOD_RATE,			0x00},   /* MOD Rate Register*/
-	{S1DREG_LCD_DISP_HWIDTH,	0x4F},   /* LCD Horizontal Display Width Register*/
-	{S1DREG_LCD_NDISP_HPER,		0x13},   /* LCD Horizontal Non-Display Period Register*/
-	{S1DREG_TFT_FPLINE_START,	0x01},   /* TFT FPLINE Start Position Register*/
-	{S1DREG_TFT_FPLINE_PWIDTH,	0x0c},   /* TFT FPLINE Pulse Width Register*/
-	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},   /* LCD Vertical Display Height Register 0*/
-	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},   /* LCD Vertical Display Height Register 1*/
-	{S1DREG_LCD_NDISP_VPER,		0x2c},   /* LCD Vertical Non-Display Period Register*/
-	{S1DREG_TFT_FPFRAME_START,	0x0a},   /* TFT FPFRAME Start Position Register*/
-	{S1DREG_TFT_FPFRAME_PWIDTH,	0x02},   /* TFT FPFRAME Pulse Width Register*/
-	{S1DREG_LCD_DISP_MODE,		0x05},   /* LCD Display Mode Register*/
-	{S1DREG_LCD_MISC,			0x01},   /* LCD Miscellaneous Register*/
-	{S1DREG_LCD_DISP_START0,	0x00},   /* LCD Display Start Address Register 0*/
-	{S1DREG_LCD_DISP_START1,	0x00},   /* LCD Display Start Address Register 1*/
-	{S1DREG_LCD_DISP_START2,	0x00},   /* LCD Display Start Address Register 2*/
-	{S1DREG_LCD_MEM_OFF0,		0x80},   /* LCD Memory Address Offset Register 0*/
-	{S1DREG_LCD_MEM_OFF1,		0x02},   /* LCD Memory Address Offset Register 1*/
-	{S1DREG_LCD_PIX_PAN,		0x03},   /* LCD Pixel Panning Register*/
-	{S1DREG_LCD_DISP_FIFO_HTC,	0x00},   /* LCD Display FIFO High Threshold Control Register*/
-	{S1DREG_LCD_DISP_FIFO_LTC,	0x00},   /* LCD Display FIFO Low Threshold Control Register*/
-	{S1DREG_CRT_DISP_HWIDTH,	0x4F},   /* CRT/TV Horizontal Display Width Register*/
-	{S1DREG_CRT_NDISP_HPER,		0x13},   /* CRT/TV Horizontal Non-Display Period Register*/
-	{S1DREG_CRT_HRTC_START,		0x01},   /* CRT/TV HRTC Start Position Register*/
-	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},   /* CRT/TV HRTC Pulse Width Register*/
-	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},   /* CRT/TV Vertical Display Height Register 0*/
-	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},   /* CRT/TV Vertical Display Height Register 1*/
-	{S1DREG_CRT_NDISP_VPER,		0x2B},   /* CRT/TV Vertical Non-Display Period Register*/
-	{S1DREG_CRT_VRTC_START,		0x09},   /* CRT/TV VRTC Start Position Register*/
-	{S1DREG_CRT_VRTC_PWIDTH,	0x01},   /* CRT/TV VRTC Pulse Width Register*/
-	{S1DREG_TV_OUT_CTL,			0x18},   /* TV Output Control Register */
-	{S1DREG_CRT_DISP_MODE,		0x05},   /* CRT/TV Display Mode Register, 16BPP*/
-	{S1DREG_CRT_DISP_START0,	0x00},   /* CRT/TV Display Start Address Register 0*/
-	{S1DREG_CRT_DISP_START1,	0x00},   /* CRT/TV Display Start Address Register 1*/
-	{S1DREG_CRT_DISP_START2,	0x00},   /* CRT/TV Display Start Address Register 2*/
-	{S1DREG_CRT_MEM_OFF0,		0x80},   /* CRT/TV Memory Address Offset Register 0*/
-	{S1DREG_CRT_MEM_OFF1,		0x02},   /* CRT/TV Memory Address Offset Register 1*/
-	{S1DREG_CRT_PIX_PAN,		0x00},   /* CRT/TV Pixel Panning Register*/
-	{S1DREG_CRT_DISP_FIFO_HTC,	0x00},   /* CRT/TV Display FIFO High Threshold Control Register*/
-	{S1DREG_CRT_DISP_FIFO_LTC,	0x00},   /* CRT/TV Display FIFO Low Threshold Control Register*/
-	{S1DREG_LCD_CUR_CTL,		0x00},   /* LCD Ink/Cursor Control Register*/
-	{S1DREG_LCD_CUR_START,		0x01},   /* LCD Ink/Cursor Start Address Register*/
-	{S1DREG_LCD_CUR_XPOS0,		0x00},   /* LCD Cursor X Position Register 0*/
-	{S1DREG_LCD_CUR_XPOS1,		0x00},   /* LCD Cursor X Position Register 1*/
-	{S1DREG_LCD_CUR_YPOS0,		0x00},   /* LCD Cursor Y Position Register 0*/
-	{S1DREG_LCD_CUR_YPOS1,		0x00},   /* LCD Cursor Y Position Register 1*/
-	{S1DREG_LCD_CUR_BCTL0,		0x00},   /* LCD Ink/Cursor Blue Color 0 Register*/
-	{S1DREG_LCD_CUR_GCTL0,		0x00},   /* LCD Ink/Cursor Green Color 0 Register*/
-	{S1DREG_LCD_CUR_RCTL0,		0x00},   /* LCD Ink/Cursor Red Color 0 Register*/
-	{S1DREG_LCD_CUR_BCTL1,		0x1F},   /* LCD Ink/Cursor Blue Color 1 Register*/
-	{S1DREG_LCD_CUR_GCTL1,		0x3F},   /* LCD Ink/Cursor Green Color 1 Register*/
-	{S1DREG_LCD_CUR_RCTL1,		0x1F},   /* LCD Ink/Cursor Red Color 1 Register*/
-	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},   /* LCD Ink/Cursor FIFO Threshold Register*/
-	{S1DREG_CRT_CUR_CTL,		0x00},   /* CRT/TV Ink/Cursor Control Register*/
-	{S1DREG_CRT_CUR_START,		0x01},   /* CRT/TV Ink/Cursor Start Address Register*/
-	{S1DREG_CRT_CUR_XPOS0,		0x00},   /* CRT/TV Cursor X Position Register 0*/
-	{S1DREG_CRT_CUR_XPOS1,		0x00},   /* CRT/TV Cursor X Position Register 1*/
-	{S1DREG_CRT_CUR_YPOS0,		0x00},   /* CRT/TV Cursor Y Position Register 0*/
-	{S1DREG_CRT_CUR_YPOS1,		0x00},   /* CRT/TV Cursor Y Position Register 1*/
-	{S1DREG_CRT_CUR_BCTL0,		0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register*/
-	{S1DREG_CRT_CUR_GCTL0,		0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register*/
-	{S1DREG_CRT_CUR_RCTL0,		0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register*/
-	{S1DREG_CRT_CUR_BCTL1,		0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register*/
-	{S1DREG_CRT_CUR_GCTL1,		0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register*/
-	{S1DREG_CRT_CUR_RCTL1,		0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register*/
-	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register*/
-	{S1DREG_BBLT_CTL0,			0x00},   /* BitBlt Control Register 0*/
-	{S1DREG_BBLT_CTL1,			0x01},   /* BitBlt Control Register 1*/
-	{S1DREG_BBLT_CC_EXP,		0x00},   /* BitBlt ROP Code/Color Expansion Register*/
-	{S1DREG_BBLT_OP,			0x00},   /* BitBlt Operation Register*/
-	{S1DREG_BBLT_SRC_START0,	0x00},   /* BitBlt Source Start Address Register 0*/
-	{S1DREG_BBLT_SRC_START1,	0x00},   /* BitBlt Source Start Address Register 1*/
-	{S1DREG_BBLT_SRC_START2,	0x00},   /* BitBlt Source Start Address Register 2*/
-	{S1DREG_BBLT_DST_START0,	0x00},   /* BitBlt Destination Start Address Register 0*/
-	{S1DREG_BBLT_DST_START1,	0x00},   /* BitBlt Destination Start Address Register 1*/
-	{S1DREG_BBLT_DST_START2,	0x00},   /* BitBlt Destination Start Address Register 2*/
-	{S1DREG_BBLT_MEM_OFF0,		0x00},   /* BitBlt Memory Address Offset Register 0*/
-	{S1DREG_BBLT_MEM_OFF1,		0x00},   /* BitBlt Memory Address Offset Register 1*/
-	{S1DREG_BBLT_WIDTH0,		0x00},   /* BitBlt Width Register 0*/
-	{S1DREG_BBLT_WIDTH1,		0x00},   /* BitBlt Width Register 1*/
-	{S1DREG_BBLT_HEIGHT0,		0x00},   /* BitBlt Height Register 0*/
-	{S1DREG_BBLT_HEIGHT1,		0x00},   /* BitBlt Height Register 1*/
-	{S1DREG_BBLT_BGC0,			0x00},   /* BitBlt Background Color Register 0*/
-	{S1DREG_BBLT_BGC1,			0x00},   /* BitBlt Background Color Register 1*/
-	{S1DREG_BBLT_FGC0,			0x00},   /* BitBlt Foreground Color Register 0*/
-	{S1DREG_BBLT_FGC1,			0x00},   /* BitBlt Foreground Color Register 1*/
-	{S1DREG_LKUP_MODE,			0x00},   /* Look-Up Table Mode Register*/
-	{S1DREG_LKUP_ADDR,			0x00},   /* Look-Up Table Address Register*/
-	{S1DREG_PS_CNF,				0x00},   /* Power Save Configuration Register*/
-	{S1DREG_PS_STATUS,			0x00},   /* Power Save Status Register*/
-	{S1DREG_CPU2MEM_WDOGT,		0x00},   /* CPU-to-Memory Access Watchdog Timer Register*/
-	{S1DREG_COM_DISP_MODE,		0x01},   /* Display Mode Register, LCD only*/
+	{S1DREG_MISC,			0x00},	/* Miscellaneous Register*/
+	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
+	{S1DREG_GPIO_CNF0,		0x00},	/* General IO Pins Configuration Register*/
+	{S1DREG_GPIO_CTL0,		0x00},	/* General IO Pins Control Register*/
+	{S1DREG_CLK_CNF,		0x11},	/* Memory Clock Configuration Register*/
+	{S1DREG_LCD_CLK_CNF,		0x10},	/* LCD Pixel Clock Configuration Register*/
+	{S1DREG_CRT_CLK_CNF,		0x12},	/* CRT/TV Pixel Clock Configuration Register*/
+	{S1DREG_MPLUG_CLK_CNF,		0x01},	/* MediaPlug Clock Configuration Register*/
+	{S1DREG_CPU2MEM_WST_SEL,	0x02},	/* CPU To Memory Wait State Select Register*/
+	{S1DREG_MEM_CNF,		0x00},	/* Memory Configuration Register*/
+	{S1DREG_SDRAM_REF_RATE,		0x04},	/* DRAM Refresh Rate Register, MCLK source*/
+	{S1DREG_SDRAM_TC0,		0x12},	/* DRAM Timings Control Register 0*/
+	{S1DREG_SDRAM_TC1,		0x02},	/* DRAM Timings Control Register 1*/
+	{S1DREG_PANEL_TYPE,		0x25},	/* Panel Type Register*/
+	{S1DREG_MOD_RATE,		0x00},	/* MOD Rate Register*/
+	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* LCD Horizontal Display Width Register*/
+	{S1DREG_LCD_NDISP_HPER,		0x13},	/* LCD Horizontal Non-Display Period Register*/
+	{S1DREG_TFT_FPLINE_START,	0x01},	/* TFT FPLINE Start Position Register*/
+	{S1DREG_TFT_FPLINE_PWIDTH,	0x0c},	/* TFT FPLINE Pulse Width Register*/
+	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},	/* LCD Vertical Display Height Register 0*/
+	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* LCD Vertical Display Height Register 1*/
+	{S1DREG_LCD_NDISP_VPER,		0x2c},	/* LCD Vertical Non-Display Period Register*/
+	{S1DREG_TFT_FPFRAME_START,	0x0a},	/* TFT FPFRAME Start Position Register*/
+	{S1DREG_TFT_FPFRAME_PWIDTH,	0x02},	/* TFT FPFRAME Pulse Width Register*/
+	{S1DREG_LCD_DISP_MODE,		0x05},	/* LCD Display Mode Register*/
+	{S1DREG_LCD_MISC,		0x01},	/* LCD Miscellaneous Register*/
+	{S1DREG_LCD_DISP_START0,	0x00},	/* LCD Display Start Address Register 0*/
+	{S1DREG_LCD_DISP_START1,	0x00},	/* LCD Display Start Address Register 1*/
+	{S1DREG_LCD_DISP_START2,	0x00},	/* LCD Display Start Address Register 2*/
+	{S1DREG_LCD_MEM_OFF0,		0x80},	/* LCD Memory Address Offset Register 0*/
+	{S1DREG_LCD_MEM_OFF1,		0x02},	/* LCD Memory Address Offset Register 1*/
+	{S1DREG_LCD_PIX_PAN,		0x03},	/* LCD Pixel Panning Register*/
+	{S1DREG_LCD_DISP_FIFO_HTC,	0x00},	/* LCD Display FIFO High Threshold Control Register*/
+	{S1DREG_LCD_DISP_FIFO_LTC,	0x00},	/* LCD Display FIFO Low Threshold Control Register*/
+	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* CRT/TV Horizontal Display Width Register*/
+	{S1DREG_CRT_NDISP_HPER,		0x13},	/* CRT/TV Horizontal Non-Display Period Register*/
+	{S1DREG_CRT_HRTC_START,		0x01},	/* CRT/TV HRTC Start Position Register*/
+	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* CRT/TV HRTC Pulse Width Register*/
+	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},	/* CRT/TV Vertical Display Height Register 0*/
+	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* CRT/TV Vertical Display Height Register 1*/
+	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* CRT/TV Vertical Non-Display Period Register*/
+	{S1DREG_CRT_VRTC_START,		0x09},	/* CRT/TV VRTC Start Position Register*/
+	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* CRT/TV VRTC Pulse Width Register*/
+	{S1DREG_TV_OUT_CTL,		0x18},	/* TV Output Control Register */
+	{S1DREG_CRT_DISP_MODE,		0x05},	/* CRT/TV Display Mode Register, 16BPP*/
+	{S1DREG_CRT_DISP_START0,	0x00},	/* CRT/TV Display Start Address Register 0*/
+	{S1DREG_CRT_DISP_START1,	0x00},	/* CRT/TV Display Start Address Register 1*/
+	{S1DREG_CRT_DISP_START2,	0x00},	/* CRT/TV Display Start Address Register 2*/
+	{S1DREG_CRT_MEM_OFF0,		0x80},	/* CRT/TV Memory Address Offset Register 0*/
+	{S1DREG_CRT_MEM_OFF1,		0x02},	/* CRT/TV Memory Address Offset Register 1*/
+	{S1DREG_CRT_PIX_PAN,		0x00},	/* CRT/TV Pixel Panning Register*/
+	{S1DREG_CRT_DISP_FIFO_HTC,	0x00},	/* CRT/TV Display FIFO High Threshold Control Register*/
+	{S1DREG_CRT_DISP_FIFO_LTC,	0x00},	/* CRT/TV Display FIFO Low Threshold Control Register*/
+	{S1DREG_LCD_CUR_CTL,		0x00},	/* LCD Ink/Cursor Control Register*/
+	{S1DREG_LCD_CUR_START,		0x01},	/* LCD Ink/Cursor Start Address Register*/
+	{S1DREG_LCD_CUR_XPOS0,		0x00},	/* LCD Cursor X Position Register 0*/
+	{S1DREG_LCD_CUR_XPOS1,		0x00},	/* LCD Cursor X Position Register 1*/
+	{S1DREG_LCD_CUR_YPOS0,		0x00},	/* LCD Cursor Y Position Register 0*/
+	{S1DREG_LCD_CUR_YPOS1,		0x00},	/* LCD Cursor Y Position Register 1*/
+	{S1DREG_LCD_CUR_BCTL0,		0x00},	/* LCD Ink/Cursor Blue Color 0 Register*/
+	{S1DREG_LCD_CUR_GCTL0,		0x00},	/* LCD Ink/Cursor Green Color 0 Register*/
+	{S1DREG_LCD_CUR_RCTL0,		0x00},	/* LCD Ink/Cursor Red Color 0 Register*/
+	{S1DREG_LCD_CUR_BCTL1,		0x1F},	/* LCD Ink/Cursor Blue Color 1 Register*/
+	{S1DREG_LCD_CUR_GCTL1,		0x3F},	/* LCD Ink/Cursor Green Color 1 Register*/
+	{S1DREG_LCD_CUR_RCTL1,		0x1F},	/* LCD Ink/Cursor Red Color 1 Register*/
+	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},	/* LCD Ink/Cursor FIFO Threshold Register*/
+	{S1DREG_CRT_CUR_CTL,		0x00},	/* CRT/TV Ink/Cursor Control Register*/
+	{S1DREG_CRT_CUR_START,		0x01},	/* CRT/TV Ink/Cursor Start Address Register*/
+	{S1DREG_CRT_CUR_XPOS0,		0x00},	/* CRT/TV Cursor X Position Register 0*/
+	{S1DREG_CRT_CUR_XPOS1,		0x00},	/* CRT/TV Cursor X Position Register 1*/
+	{S1DREG_CRT_CUR_YPOS0,		0x00},	/* CRT/TV Cursor Y Position Register 0*/
+	{S1DREG_CRT_CUR_YPOS1,		0x00},	/* CRT/TV Cursor Y Position Register 1*/
+	{S1DREG_CRT_CUR_BCTL0,		0x00},	/* CRT/TV Ink/Cursor Blue Color 0 Register*/
+	{S1DREG_CRT_CUR_GCTL0,		0x00},	/* CRT/TV Ink/Cursor Green Color 0 Register*/
+	{S1DREG_CRT_CUR_RCTL0,		0x00},	/* CRT/TV Ink/Cursor Red Color 0 Register*/
+	{S1DREG_CRT_CUR_BCTL1,		0x1F},	/* CRT/TV Ink/Cursor Blue Color 1 Register*/
+	{S1DREG_CRT_CUR_GCTL1,		0x3F},	/* CRT/TV Ink/Cursor Green Color 1 Register*/
+	{S1DREG_CRT_CUR_RCTL1,		0x1F},	/* CRT/TV Ink/Cursor Red Color 1 Register*/
+	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},	/* CRT/TV Ink/Cursor FIFO Threshold Register*/
+	{S1DREG_BBLT_CTL0,		0x00},	/* BitBlt Control Register 0*/
+	{S1DREG_BBLT_CTL1,		0x01},	/* BitBlt Control Register 1*/
+	{S1DREG_BBLT_CC_EXP,		0x00},	/* BitBlt ROP Code/Color Expansion Register*/
+	{S1DREG_BBLT_OP,		0x00},	/* BitBlt Operation Register*/
+	{S1DREG_BBLT_SRC_START0,	0x00},	/* BitBlt Source Start Address Register 0*/
+	{S1DREG_BBLT_SRC_START1,	0x00},	/* BitBlt Source Start Address Register 1*/
+	{S1DREG_BBLT_SRC_START2,	0x00},	/* BitBlt Source Start Address Register 2*/
+	{S1DREG_BBLT_DST_START0,	0x00},	/* BitBlt Destination Start Address Register 0*/
+	{S1DREG_BBLT_DST_START1,	0x00},	/* BitBlt Destination Start Address Register 1*/
+	{S1DREG_BBLT_DST_START2,	0x00},	/* BitBlt Destination Start Address Register 2*/
+	{S1DREG_BBLT_MEM_OFF0,		0x00},	/* BitBlt Memory Address Offset Register 0*/
+	{S1DREG_BBLT_MEM_OFF1,		0x00},	/* BitBlt Memory Address Offset Register 1*/
+	{S1DREG_BBLT_WIDTH0,		0x00},	/* BitBlt Width Register 0*/
+	{S1DREG_BBLT_WIDTH1,		0x00},	/* BitBlt Width Register 1*/
+	{S1DREG_BBLT_HEIGHT0,		0x00},	/* BitBlt Height Register 0*/
+	{S1DREG_BBLT_HEIGHT1,		0x00},	/* BitBlt Height Register 1*/
+	{S1DREG_BBLT_BGC0,		0x00},	/* BitBlt Background Color Register 0*/
+	{S1DREG_BBLT_BGC1,		0x00},	/* BitBlt Background Color Register 1*/
+	{S1DREG_BBLT_FGC0,		0x00},	/* BitBlt Foreground Color Register 0*/
+	{S1DREG_BBLT_FGC1,		0x00},	/* BitBlt Foreground Color Register 1*/
+	{S1DREG_LKUP_MODE,		0x00},	/* Look-Up Table Mode Register*/
+	{S1DREG_LKUP_ADDR,		0x00},	/* Look-Up Table Address Register*/
+	{S1DREG_PS_CNF,			0x00},	/* Power Save Configuration Register*/
+	{S1DREG_PS_STATUS,		0x00},	/* Power Save Status Register*/
+	{S1DREG_CPU2MEM_WDOGT,		0x00},	/* CPU-to-Memory Access Watchdog Timer Register*/
+	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
 };
 
-static u64 s1dfb_dmamask = 0xffffffffUL;
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
 
-static struct s1d13xxxfb_pdata yl_9200_s1dfb_pdata = {
-		.initregs				= yl_9200_s1dfb_initregs,
-		.initregssize			= ARRAY_SIZE(yl_9200_s1dfb_initregs),
-		.platform_init_video	= yl_9200_init_video,
+static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
+	.initregs		= yl9200_s1dfb_initregs,
+	.initregssize		= ARRAY_SIZE(yl9200_s1dfb_initregs),
+	.platform_init_video	= yl9200_init_video,
 };
 
-static struct resource yl_9200_s1dfb_resource[] = {
+static struct resource yl9200_s1dfb_resource[] = {
 	[0] = {	/* video mem */
-		.name   = "s1d13xxxfb memory",
-	/*	.name   = "s1d13806 memory",*/
-		.start  = AT91_FB_VMEM_BASE,
-		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "s1d13xxxfb memory",
+		.start	= AT91_FB_VMEM_BASE,
+		.end	= AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {	/* video registers */
-		.name   = "s1d13xxxfb registers",
-	/*	.name   = "s1d13806 registers",*/
-		.start  = AT91_FB_REG_BASE,
-		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "s1d13xxxfb registers",
+		.start	= AT91_FB_REG_BASE,
+		.end	= AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+		.flags	= IORESOURCE_MEM,
 	},
 };
 
-static struct platform_device yl_9200_s1dfb_device = {
-	/*TODO S.Birtles , really we need the chip revision in here as well*/
-		.name		= "s1d13806fb",
-	/*  .name		= "s1d13506fb",*/
-		.id			= -1,
-		.dev		= {
-	/*TODO theres a waring here!!*/
-	/*WARNING: vmlinux.o(.data+0x2dbc): Section mismatch: reference to .init.text: (between 'yl_9200_s1dfb_pdata' and 's1dfb_dmamask')*/
+static struct platform_device yl9200_s1dfb_device = {
+	.name		= "s1d13806fb",
+	.id		= -1,
+	.dev	= {
 		.dma_mask		= &s1dfb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &yl_9200_s1dfb_pdata,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &yl9200_s1dfb_pdata,
 	},
-	.resource	= yl_9200_s1dfb_resource,
-	.num_resources	= ARRAY_SIZE(yl_9200_s1dfb_resource),
+	.resource	= yl9200_s1dfb_resource,
+	.num_resources	= ARRAY_SIZE(yl9200_s1dfb_resource),
 };
 
-void __init yl_9200_add_device_video(void)
+void __init yl9200_add_device_video(void)
 {
-	platform_device_register(&yl_9200_s1dfb_device);
+	platform_device_register(&yl9200_s1dfb_device);
 }
 #else
-	void __init yl_9200_add_device_video(void) {}
+void __init yl9200_add_device_video(void) {}
 #endif
 
-/*this is not called first , yl_9200_map_io is called first*/
-static void __init yl_9200_board_init(void)
+
+static void __init yl9200_board_init(void)
 {
 	/* Serial */
 	at91_add_device_serial();
 	/* Ethernet */
-	at91_add_device_eth(&yl_9200_eth_data);
+	at91_add_device_eth(&yl9200_eth_data);
 	/* USB Host */
-	at91_add_device_usbh(&yl_9200_usbh_data);
+	at91_add_device_usbh(&yl9200_usbh_data);
 	/* USB Device */
-	at91_add_device_udc(&yl_9200_udc_data);
-	/* pullup_pin it is  actually active low, but this is not needed, driver sets it up */
-	/*at91_set_multi_drive(yl_9200_udc_data.pullup_pin, 0);*/
-
-	/* Compact Flash */
-	/*at91_add_device_cf(&yl_9200_cf_data);*/
-
+	at91_add_device_udc(&yl9200_udc_data);
 	/* I2C */
-	at91_add_device_i2c(yl_9200_i2c_devices, ARRAY_SIZE(yl_9200_i2c_devices));
-	/* SPI */
-	/*TODO YL9200 we have 2 spi interfaces touch screen & CAN*/
-	/* AT91_PIN_PA5, AT91_PIN_PA6 , are used on the  max 485 NOT SPI*/
-
-	/*touch screen and CAN*/
-	at91_add_device_spi(yl_9200_spi_devices, ARRAY_SIZE(yl_9200_spi_devices));
-
-	/*Basically the  TS uses  PB11 & PB10 , PB11 is configured by the SPI system BP10 IS NOT USED!!*/
-	/* we need this incase the board is running without a touch screen*/
-	#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	at91_init_device_ts(); /*init the touch screen device*/
-	#endif
-	/* DataFlash card */
-	at91_add_device_mmc(0, &yl_9200_mmc_data);
+	at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
+	/* MMC */
+	at91_add_device_mmc(0, &yl9200_mmc_data);
 	/* NAND */
-	at91_add_device_nand(&yl_9200_nand_data);
+	at91_add_device_nand(&yl9200_nand_data);
 	/* NOR Flash */
-	platform_device_register(&yl_9200_flash);
-	/* LEDs. Note!! this does not include the led's we passed for the processor status */
-	at91_gpio_leds(yl_9200_leds, ARRAY_SIZE(yl_9200_leds));
-	/* VGA  */
-	/*this is self registered by including the s1d13xxx chip in the kernel build*/
-	yl_9200_add_device_video();
+	platform_device_register(&yl9200_flash);
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+	/* SPI */
+	at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
+	/* Touchscreen */
+	yl9200_add_device_ts();
+#endif
+	/* LEDs. */
+	at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
 	/* Push Buttons */
-	yl_9200_add_device_buttons();
-	/*TODO fixup the Sounder */
-//	yl_9200_add_device_sounder(yl_9200_sounder,ARRAY_SIZE(yl_9200_sounder));
-
+	yl9200_add_device_buttons();
+	/* VGA */
+	yl9200_add_device_video();
 }
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
-	/* Maintainer: S.Birtles*/
-	.phys_io		= AT91_BASE_SYS,
+	/* Maintainer: S.Birtles */
+	.phys_io	= AT91_BASE_SYS,
 	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer			= &at91rm9200_timer,
-	.map_io			= yl_9200_map_io,
-	.init_irq		= yl_9200_init_irq,
-	.init_machine	= yl_9200_board_init,
+	.timer		= &at91rm9200_timer,
+	.map_io		= yl9200_map_io,
+	.init_irq	= yl9200_init_irq,
+	.init_machine	= yl9200_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a33dfe450726..464bdbbf74df 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -112,12 +112,34 @@ static void pmc_sys_mode(struct clk *clk, int is_on)
 		at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
 }
 
+static void pmc_uckr_mode(struct clk *clk, int is_on)
+{
+	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+
+	if (is_on) {
+		is_on = AT91_PMC_LOCKU;
+		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
+	} else
+		at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
+
+	do {
+		cpu_relax();
+	} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
+}
+
 /* USB function clocks (PLLB must be 48 MHz) */
 static struct clk udpck = {
 	.name		= "udpck",
 	.parent		= &pllb,
 	.mode		= pmc_sys_mode,
 };
+static struct clk utmi_clk = {
+	.name		= "utmi_clk",
+	.parent		= &main_clk,
+	.pmc_mask	= AT91_PMC_UPLLEN,	/* in CKGR_UCKR */
+	.mode		= pmc_uckr_mode,
+	.type		= CLK_TYPE_PLL,
+};
 static struct clk uhpck = {
 	.name		= "uhpck",
 	.parent		= &pllb,
@@ -361,7 +383,7 @@ static void __init init_programmable_clock(struct clk *clk)
 
 static int at91_clk_show(struct seq_file *s, void *unused)
 {
-	u32		scsr, pcsr, sr;
+	u32		scsr, pcsr, uckr = 0, sr;
 	struct clk	*clk;
 
 	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
@@ -369,7 +391,10 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
 	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
 	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
-	seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+	if (!cpu_is_at91sam9rl())
+		seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+		seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
 
@@ -382,6 +407,8 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 			state = (scsr & clk->pmc_mask) ? "on" : "off";
 		else if (clk->mode == pmc_periph_mode)
 			state = (pcsr & clk->pmc_mask) ? "on" : "off";
+		else if (clk->mode == pmc_uckr_mode)
+			state = (uckr & clk->pmc_mask) ? "on" : "off";
 		else if (clk->pmc_mask)
 			state = (sr & clk->pmc_mask) ? "on" : "off";
 		else if (clk == &clk32k || clk == &main_clk)
@@ -488,14 +515,19 @@ static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
 		/*
 		 * PLL input between 1MHz and 32MHz per spec, but lower
 		 * frequences seem necessary in some cases so allow 100K.
+		 * Warning: some newer products need 2MHz min.
 		 */
 		input = main_freq / i;
+		if (cpu_is_at91sam9g20() && input < 2000000)
+			continue;
 		if (input < 100000)
 			continue;
 		if (input > 32000000)
 			continue;
 
 		mul1 = out_freq / input;
+		if (cpu_is_at91sam9g20() && mul > 63)
+			continue;
 		if (mul1 > 2048)
 			continue;
 		if (mul1 < 2)
@@ -555,7 +587,8 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if (plla.rate_hz > 209000000)
+	if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
+	   || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
 	/*
@@ -570,7 +603,7 @@ int __init at91_clock_init(unsigned long main_clock)
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	} else if (cpu_is_at91cap9()) {
@@ -582,6 +615,17 @@ int __init at91_clock_init(unsigned long main_clock)
 	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 
 	/*
+	 * USB HS clock init
+	 */
+	if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+		/*
+		 * multiplier is hard-wired to 40
+		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
+		 */
+		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+	}
+
+	/*
 	 * MCK and CPU derive from one of those primary clocks.
 	 * For now, assume this parentage won't change.
 	 */
@@ -591,13 +635,21 @@ int __init at91_clock_init(unsigned long main_clock)
 	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));				/* prescale */
 	if (cpu_is_at91rm9200())
 		mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
-	else
-		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
+	else if (cpu_is_at91sam9g20()) {
+		mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
+			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
+		if (mckr & AT91_PMC_PDIV)
+			freq /= 2;		/* processor clock division */
+	} else
+		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
 
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
 		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
 
+	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+		list_add_tail(&utmi_clk.node, &clocks);
+
 	/* MCK and CPU clock are "always on" */
 	clk_enable(&mck);
 
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index aa863c157708..8ab4feb1ec5b 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -202,7 +202,7 @@ static int at91_pm_verify_clocks(void)
 			pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
 		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
 			pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 9d7515c36bff..f62c35500bb7 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -74,6 +74,7 @@ struct clk *clk_get(struct device *dev, const char *id)
 
 	return ERR_PTR(-ENOENT);
 }
+EXPORT_SYMBOL(clk_get);
 
 int clk_enable(struct clk *clk)
 {
@@ -86,6 +87,7 @@ int clk_enable(struct clk *clk)
 
 	return 0;
 }
+EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
@@ -96,15 +98,18 @@ void clk_disable(struct clk *clk)
 		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
 	}
 }
+EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->rate;
 }
+EXPORT_SYMBOL(clk_get_rate);
 
 void clk_put(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_put);
 
 
 
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 0694ad6b6476..32f8609e4f85 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,12 +14,10 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
 pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
 
-leds-$(CONFIG_ARCH_CO285) += ebsa285-leds.o
 leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
 leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
 
 obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
-obj-$(CONFIG_ARCH_CO285) += co285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
diff --git a/arch/arm/mach-footbridge/co285.c b/arch/arm/mach-footbridge/co285.c
deleted file mode 100644
index 4545576ad8d9..000000000000
--- a/arch/arm/mach-footbridge/co285.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/co285.c
- *
- * CO285 machine fixup
- */
-#include <linux/init.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-static void __init
-fixup_coebsa285(struct machine_desc *desc, struct tag *tags,
-		char **cmdline, struct meminfo *mi)
-{
-	extern unsigned long boot_memory_end;
-	extern char boot_command_line[];
-
-	mi->nr_banks      = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size  = boot_memory_end;
-	mi->bank[0].node  = 0;
-
-	*cmdline = boot_command_line;
-}
-
-MACHINE_START(CO285, "co-EBSA285")
-	/* Maintainer: Mark van Doesburg */
-	.phys_io	= DC21285_ARMCSR_BASE,
-	.io_pg_offst	= ((0x7cf00000) >> 18) & 0xfffc,
-	.fixup		= fixup_coebsa285,
-	.map_io		= footbridge_map_io,
-	.init_irq	= footbridge_init_irq,
-	.timer		= &footbridge_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index ef29fc34ce65..b08ab507c052 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -177,25 +177,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
 #endif
 };
 
-/*
- * The CO-ebsa285 mapping.
- */
-static struct map_desc co285_io_desc[] __initdata = {
-#ifdef CONFIG_ARCH_CO285
-	{
-		.virtual	= PCIO_BASE,
-		.pfn		= __phys_to_pfn(DC21285_PCI_IO),
-		.length		= PCIO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= PCIMEM_BASE,
-		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
-		.length		= PCIMEM_SIZE,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
 void __init footbridge_map_io(void)
 {
 	/*
@@ -208,8 +189,6 @@ void __init footbridge_map_io(void)
 	 * Now, work out what we've got to map in addition on this
 	 * platform.
 	 */
-	if (machine_is_co285())
-		iotable_init(co285_io_desc, ARRAY_SIZE(co285_io_desc));
 	if (footbridge_cfn_mode())
 		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
 }
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
index a64e22226515..09c1fbc51876 100644
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ b/arch/arm/mach-footbridge/ebsa285-leds.c
@@ -128,7 +128,7 @@ static void ebsa285_leds_event(led_event_t evt)
 
 static int __init leds_init(void)
 {
-	if (machine_is_ebsa285() || machine_is_co285())
+	if (machine_is_ebsa285())
 		leds_event = ebsa285_leds_event;
 
 	leds_event(led_start);
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index 5d02e95dede3..d5cfcda385d6 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -115,8 +115,7 @@ static int set_isa_cmos_time(void)
 
 void __init isa_rtc_init(void)
 {
-	if (machine_is_co285() ||
-	    machine_is_personal_server())
+	if (machine_is_personal_server())
 		/*
 		 * Add-in 21285s shouldn't access the RTC
 		 */
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 88d5e61a2e13..b047c7e795a9 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			+= irq.o time.o dma.o generic.o
+obj-y			+= irq.o time.o dma.o generic.o clock.o
 
 obj-$(CONFIG_CPU_FREQ_IMX)	+= cpufreq.o
 
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
new file mode 100644
index 000000000000..6a90fe5578df
--- /dev/null
+++ b/arch/arm/mach-imx/clock.c
@@ -0,0 +1,205 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/math64.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+/*
+ * Very simple approach: We can't disable clocks, so we do
+ * not need refcounting
+ */
+
+struct clk {
+	struct list_head node;
+	const char *name;
+	unsigned long (*get_rate)(void);
+};
+
+/*
+ *  get the system pll clock in Hz
+ *
+ *                  mfi + mfn / (mfd +1)
+ *  f = 2 * f_ref * --------------------
+ *                        pd + 1
+ */
+static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
+{
+	unsigned long long ll;
+	unsigned long quot;
+
+	u32 mfi = (pll >> 10) & 0xf;
+	u32 mfn = pll & 0x3ff;
+	u32 mfd = (pll >> 16) & 0x3ff;
+	u32 pd =  (pll >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+
+	ll = 2 * (unsigned long long)f_ref *
+		((mfi << 16) + (mfn << 16) / (mfd + 1));
+	quot = (pd + 1) * (1 << 16);
+	ll += quot / 2;
+	do_div(ll, quot);
+	return (unsigned long)ll;
+}
+
+static unsigned long imx_get_system_clk(void)
+{
+	u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
+
+	return imx_decode_pll(SPCTL0, f_ref);
+}
+
+static unsigned long imx_get_mcu_clk(void)
+{
+	return imx_decode_pll(MPCTL0, CLK32 * 512);
+}
+
+/*
+ *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
+ */
+static unsigned long imx_get_perclk1(void)
+{
+	return imx_get_system_clk() / (((PCDR) & 0xf)+1);
+}
+
+/*
+ *  get peripheral clock 2 ( LCD, SD, SPI[12] )
+ */
+static unsigned long imx_get_perclk2(void)
+{
+	return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
+}
+
+/*
+ *  get peripheral clock 3 ( SSI )
+ */
+static unsigned long imx_get_perclk3(void)
+{
+	return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
+}
+
+/*
+ *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
+ */
+static unsigned long imx_get_hclk(void)
+{
+	return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
+}
+
+static struct clk clk_system_clk = {
+	.name = "system_clk",
+	.get_rate = imx_get_system_clk,
+};
+
+static struct clk clk_hclk = {
+	.name = "hclk",
+	.get_rate = imx_get_hclk,
+};
+
+static struct clk clk_mcu_clk = {
+	.name = "mcu_clk",
+	.get_rate = imx_get_mcu_clk,
+};
+
+static struct clk clk_perclk1 = {
+	.name = "perclk1",
+	.get_rate = imx_get_perclk1,
+};
+
+static struct clk clk_uart_clk = {
+	.name = "uart_clk",
+	.get_rate = imx_get_perclk1,
+};
+
+static struct clk clk_perclk2 = {
+	.name = "perclk2",
+	.get_rate = imx_get_perclk2,
+};
+
+static struct clk clk_perclk3 = {
+	.name = "perclk3",
+	.get_rate = imx_get_perclk3,
+};
+
+static struct clk *clks[] = {
+	&clk_perclk1,
+	&clk_perclk2,
+	&clk_perclk3,
+	&clk_system_clk,
+	&clk_hclk,
+	&clk_mcu_clk,
+	&clk_uart_clk,
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+	mutex_lock(&clocks_mutex);
+	list_for_each_entry(p, &clocks, node) {
+		if (!strcmp(p->name, id)) {
+			clk = p;
+			goto found;
+		}
+	}
+
+found:
+	mutex_unlock(&clocks_mutex);
+
+	return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+}
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->get_rate();
+}
+
+int imx_clocks_init(void)
+{
+	int i;
+
+	mutex_lock(&clocks_mutex);
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		list_add(&clks[i]->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index e548ba74a4d2..be0809b33e08 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -32,6 +32,8 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <asm/system.h>
 
 #include <asm/hardware.h>
@@ -52,6 +54,8 @@
 static u32 mpctl0_at_boot;
 static u32 bclk_div_at_boot;
 
+static struct clk *system_clk, *mcu_clk;
+
 static void imx_set_async_mode(void)
 {
 	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
@@ -160,10 +164,10 @@ static unsigned int imx_get_speed(unsigned int cpu)
 	cr = get_cr();
 
 	if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
-		freq = imx_get_system_clk();
+		freq = clk_get_rate(system_clk);
 		freq = (freq + bclk_div/2) / bclk_div;
 	} else {
-		freq = imx_get_mcu_clk();
+		freq = clk_get_rate(mcu_clk);
 		if (cscr & CSCR_MPU_PRESC)
 			freq /= 2;
 	}
@@ -201,7 +205,7 @@ static int imx_set_target(struct cpufreq_policy *policy,
 	pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
 			freq, mpctl0_at_boot);
 
-	sysclk = imx_get_system_clk();
+	sysclk = clk_get_rate(system_clk);
 
 	if (freq > sysclk / bclk_div_at_boot + 1000000) {
 		freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
@@ -290,6 +294,16 @@ static int __init imx_cpufreq_init(void)
 	bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
 	mpctl0_at_boot = 0;
 
+	system_clk = clk_get(NULL, "system_clk");
+	if (IS_ERR(system_clk))
+		return PTR_ERR(system_clk);
+
+	mcu_clk = clk_get(NULL, "mcu_clk");
+	if (IS_ERR(mcu_clk)) {
+		clk_put(system_clk);
+		return PTR_ERR(mcu_clk);
+	}
+
 	if((CSCR & CSCR_MPEN) &&
 	   ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
 		mpctl0_at_boot = MPCTL0;
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index a59ff2987cb7..ee1c6f06ff64 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -410,7 +410,6 @@ void imx_dma_free(imx_dmach_t dma_ch)
 
 /**
  * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @dma_ch: i.MX DMA channel number
  * @name: the driver/caller own non-%NULL identification
  * @prio: one of the hardware distinguished priority level:
  *        %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
@@ -420,11 +419,9 @@ void imx_dma_free(imx_dmach_t dma_ch)
  * in the higher and then even lower priority groups.
  *
  * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               Zero value indicates successful channel allocation.
+ *               On successful allocation channel is returned.
  */
-int
-imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name,
-			imx_dma_prio prio)
+imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
 {
 	int i;
 	int best;
@@ -444,15 +441,13 @@ imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name,
 
 	for (i = best; i < IMX_DMA_CHANNELS; i++) {
 		if (!imx_dma_request(i, name)) {
-			*pdma_ch = i;
-			return 0;
+			return i;
 		}
 	}
 
 	for (i = best - 1; i >= 0; i--) {
 		if (!imx_dma_request(i, name)) {
-			*pdma_ch = i;
-			return 0;
+			return i;
 		}
 	}
 
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 4cfc9d3af28a..98ddd8a6d05f 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -214,82 +214,6 @@ int imx_irq_to_gpio(unsigned irq)
 
 EXPORT_SYMBOL(imx_irq_to_gpio);
 
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned int imx_decode_pll(unsigned int pll, u32 f_ref)
-{
-	unsigned long long ll;
-	unsigned long quot;
-
-	u32 mfi = (pll >> 10) & 0xf;
-	u32 mfn = pll & 0x3ff;
-	u32 mfd = (pll >> 16) & 0x3ff;
-	u32 pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
-	quot = (pd+1) * (1<<16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	return (unsigned int) ll;
-}
-
-unsigned int imx_get_system_clk(void)
-{
-	u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
-	return imx_decode_pll(SPCTL0, f_ref);
-}
-EXPORT_SYMBOL(imx_get_system_clk);
-
-unsigned int imx_get_mcu_clk(void)
-{
-	return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-EXPORT_SYMBOL(imx_get_mcu_clk);
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-unsigned int imx_get_perclk1(void)
-{
-	return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-EXPORT_SYMBOL(imx_get_perclk1);
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-unsigned int imx_get_perclk2(void)
-{
-	return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-EXPORT_SYMBOL(imx_get_perclk2);
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-unsigned int imx_get_perclk3(void)
-{
-	return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-EXPORT_SYMBOL(imx_get_perclk3);
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-unsigned int imx_get_hclk(void)
-{
-	return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-EXPORT_SYMBOL(imx_get_hclk);
-
 static struct resource imx_mmc_resources[] = {
 	[0] = {
 		.start	= 0x00214000,
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index a9778c1587ab..9635d5812bcd 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -69,6 +69,11 @@ static struct resource imx_uart1_resources[] = {
 		.end	= (UART1_MINT_TX),
 		.flags	= IORESOURCE_IRQ,
 	},
+	[3] = {
+		.start	= UART1_MINT_RTS,
+		.end	= UART1_MINT_RTS,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device imx_uart1_device = {
@@ -97,6 +102,11 @@ static struct resource imx_uart2_resources[] = {
 		.end	= (UART2_MINT_TX),
 		.flags	= IORESOURCE_IRQ,
 	},
+	[3] = {
+		.start	= UART2_MINT_RTS,
+		.end	= UART2_MINT_RTS,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device imx_uart2_device = {
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index d86d124aea22..5a41e96e8586 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -17,6 +17,7 @@
 #include <linux/time.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -86,10 +87,10 @@ static struct clocksource clocksource_imx = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static int __init imx_clocksource_init(void)
+static int __init imx_clocksource_init(unsigned long rate)
 {
 	clocksource_imx.mult =
-		clocksource_hz2mult(imx_get_perclk1(), clocksource_imx.shift);
+		clocksource_hz2mult(rate, clocksource_imx.shift);
 	clocksource_register(&clocksource_imx);
 
 	return 0;
@@ -174,9 +175,9 @@ static struct clock_event_device clockevent_imx = {
 	.rating		= 200,
 };
 
-static int __init imx_clockevent_init(void)
+static int __init imx_clockevent_init(unsigned long rate)
 {
-	clockevent_imx.mult = div_sc(imx_get_perclk1(), NSEC_PER_SEC,
+	clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
 					clockevent_imx.shift);
 	clockevent_imx.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &clockevent_imx);
@@ -190,13 +191,23 @@ static int __init imx_clockevent_init(void)
 	return 0;
 }
 
+extern int imx_clocks_init(void);
 
 static void __init imx_timer_init(void)
 {
+	struct clk *clk;
+	unsigned long rate;
+
+	imx_clocks_init();
+
+	clk = clk_get(NULL, "perclk1");
+	clk_enable(clk);
+	rate = clk_get_rate(clk);
+
 	imx_timer_hardware_init();
-	imx_clocksource_init();
+	imx_clocksource_init(rate);
 
-	imx_clockevent_init();
+	imx_clockevent_init(rate);
 
 	/*
 	 * Make irqs happen for the system timer
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 158daaf9e3b0..6a5ef8d30b10 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y					:= clock.o core.o lm.o time.o
+obj-y					:= clock.o core.o lm.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 62e653a3ea1a..5a1588cf8242 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -393,9 +393,7 @@ static int impd1_probe(struct lm_device *dev)
 		if (!d)
 			continue;
 
-		snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
-			 "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-
+		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
 		d->dev.parent	= &dev->dev;
 		d->res.start	= dev->resource.start + idev->offset;
 		d->res.end	= d->res.start + SZ_4K - 1;
@@ -407,8 +405,7 @@ static int impd1_probe(struct lm_device *dev)
 
 		ret = amba_device_register(d, &dev->resource);
 		if (ret) {
-			printk("unable to register device %s: %d\n",
-				d->dev.bus_id, ret);
+			dev_err(&d->dev, "unable to register device: %d\n");
 			kfree(d);
 		}
 	}
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index 622cdc4212dd..f939c5091405 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -81,8 +81,10 @@ int lm_device_register(struct lm_device *dev)
 	dev->dev.release = lm_device_release;
 	dev->dev.bus = &lm_bustype;
 
-	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "lm%d", dev->id);
-	dev->resource.name = dev->dev.bus_id;
+	ret = dev_set_name(&dev->dev, "lm%d", dev->id);
+	if (ret)
+		return ret;
+	dev->resource.name = dev_name(&dev->dev);
 
 	ret = request_resource(&iomem_resource, &dev->resource);
 	if (ret == 0) {
diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c
deleted file mode 100644
index 8508a0db3eaf..000000000000
--- a/arch/arm/mach-integrator/time.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/mc146818rtc.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/rtc.h>
-
-#include <asm/mach/time.h>
-
-#define RTC_DR		(0)
-#define RTC_MR		(4)
-#define RTC_STAT	(8)
-#define RTC_EOI		(8)
-#define RTC_LR		(12)
-#define RTC_CR		(16)
-#define RTC_CR_MIE	(1 << 0)
-
-extern int (*set_rtc)(void);
-static void __iomem *rtc_base;
-
-static int integrator_set_rtc(void)
-{
-	__raw_writel(xtime.tv_sec, rtc_base + RTC_LR);
-	return 1;
-}
-
-static int integrator_rtc_read_alarm(struct rtc_wkalrm *alrm)
-{
-	rtc_time_to_tm(readl(rtc_base + RTC_MR), &alrm->time);
-	return 0;
-}
-
-static inline int integrator_rtc_set_alarm(struct rtc_wkalrm *alrm)
-{
-	unsigned long time;
-	int ret;
-
-	/*
-	 * At the moment, we can only deal with non-wildcarded alarm times.
-	 */
-	ret = rtc_valid_tm(&alrm->time);
-	if (ret == 0)
-		ret = rtc_tm_to_time(&alrm->time, &time);
-	if (ret == 0)
-		writel(time, rtc_base + RTC_MR);
-	return ret;
-}
-
-static int integrator_rtc_read_time(struct rtc_time *tm)
-{
-	rtc_time_to_tm(readl(rtc_base + RTC_DR), tm);
-	return 0;
-}
-
-/*
- * Set the RTC time.  Unfortunately, we can't accurately set
- * the point at which the counter updates.
- *
- * Also, since RTC_LR is transferred to RTC_CR on next rising
- * edge of the 1Hz clock, we must write the time one second
- * in advance.
- */
-static inline int integrator_rtc_set_time(struct rtc_time *tm)
-{
-	unsigned long time;
-	int ret;
-
-	ret = rtc_tm_to_time(tm, &time);
-	if (ret == 0)
-		writel(time + 1, rtc_base + RTC_LR);
-
-	return ret;
-}
-
-static struct rtc_ops rtc_ops = {
-	.owner		= THIS_MODULE,
-	.read_time	= integrator_rtc_read_time,
-	.set_time	= integrator_rtc_set_time,
-	.read_alarm	= integrator_rtc_read_alarm,
-	.set_alarm	= integrator_rtc_set_alarm,
-};
-
-static irqreturn_t arm_rtc_interrupt(int irq, void *dev_id)
-{
-	writel(0, rtc_base + RTC_EOI);
-	return IRQ_HANDLED;
-}
-
-static int rtc_probe(struct amba_device *dev, void *id)
-{
-	int ret;
-
-	if (rtc_base)
-		return -EBUSY;
-
-	ret = amba_request_regions(dev, NULL);
-	if (ret)
-		goto out;
-
-	rtc_base = ioremap(dev->res.start, SZ_4K);
-	if (!rtc_base) {
-		ret = -ENOMEM;
-		goto res_out;
-	}
-
-	__raw_writel(0, rtc_base + RTC_CR);
-	__raw_writel(0, rtc_base + RTC_EOI);
-
-	xtime.tv_sec = __raw_readl(rtc_base + RTC_DR);
-
-	/* note that 'dev' is merely used for irq disambiguation;
-	 * it is not actually referenced in the irq handler
-	 */
-	ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED,
-			  "rtc-pl030", dev);
-	if (ret)
-		goto map_out;
-
-	ret = register_rtc(&rtc_ops);
-	if (ret)
-		goto irq_out;
-
-	set_rtc = integrator_set_rtc;
-	return 0;
-
- irq_out:
-	free_irq(dev->irq[0], dev);
- map_out:
-	iounmap(rtc_base);
-	rtc_base = NULL;
- res_out:
-	amba_release_regions(dev);
- out:
-	return ret;
-}
-
-static int rtc_remove(struct amba_device *dev)
-{
-	set_rtc = NULL;
-
-	writel(0, rtc_base + RTC_CR);
-
-	free_irq(dev->irq[0], dev);
-	unregister_rtc(&rtc_ops);
-
-	iounmap(rtc_base);
-	rtc_base = NULL;
-	amba_release_regions(dev);
-
-	return 0;
-}
-
-static struct timespec rtc_delta;
-
-static int rtc_suspend(struct amba_device *dev, pm_message_t state)
-{
-	struct timespec rtc;
-
-	rtc.tv_sec = readl(rtc_base + RTC_DR);
-	rtc.tv_nsec = 0;
-	save_time_delta(&rtc_delta, &rtc);
-
-	return 0;
-}
-
-static int rtc_resume(struct amba_device *dev)
-{
-	struct timespec rtc;
-
-	rtc.tv_sec = readl(rtc_base + RTC_DR);
-	rtc.tv_nsec = 0;
-	restore_time_delta(&rtc_delta, &rtc);
-
-	return 0;
-}
-
-static struct amba_id rtc_ids[] = {
-	{
-		.id	= 0x00041030,
-		.mask	= 0x000fffff,
-	},
-	{ 0, 0 },
-};
-
-static struct amba_driver rtc_driver = {
-	.drv		= {
-		.name	= "rtc-pl030",
-	},
-	.probe		= rtc_probe,
-	.remove		= rtc_remove,
-	.suspend	= rtc_suspend,
-	.resume		= rtc_resume,
-	.id_table	= rtc_ids,
-};
-
-static int __init integrator_rtc_init(void)
-{
-	return amba_driver_register(&rtc_driver);
-}
-
-static void __exit integrator_rtc_exit(void)
-{
-	amba_driver_unregister(&rtc_driver);
-}
-
-module_init(integrator_rtc_init);
-module_exit(integrator_rtc_exit);
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2741063bf361..28f164ea4726 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -17,6 +17,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/f75375s.h>
+#include <linux/leds-pca9532.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -206,6 +207,53 @@ static struct f75375s_platform_data n2100_f75375s = {
 	.pwm_enable = { 0, 0 },
 };
 
+static struct pca9532_platform_data n2100_leds = {
+	.leds = {
+	{	.name = "n2100:red:satafail0",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:satafail1",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:blue:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{ 	.type = PCA9532_TYPE_NONE },
+
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:red:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+
+	{	.type = PCA9532_TYPE_NONE }, /* power OFF gpio */
+	{	.type = PCA9532_TYPE_NONE }, /* reset gpio */
+	{	.type = PCA9532_TYPE_NONE },
+	{	.type = PCA9532_TYPE_NONE },
+
+	{	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:orange:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "N2100 beeper"  ,
+		.state =  PCA9532_OFF,
+		.type = PCA9532_TYPE_N2100_BEEP,
+	},
+	},
+	.psc = { 0, 0 },
+	.pwm = { 0, 0 },
+};
+
 static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rs5c372b", 0x32),
@@ -214,6 +262,10 @@ static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 		I2C_BOARD_INFO("f75375", 0x2e),
 		.platform_data = &n2100_f75375s,
 	},
+	{
+		I2C_BOARD_INFO("pca9532", 0x60),
+		.platform_data = &n2100_leds,
+	},
 };
 
 /*
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index e774447c0592..db8b5fe06c0d 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -125,6 +125,15 @@ config	ARCH_IXDP4XX
 	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
 	default y
 
+config MACH_FSG
+	bool
+	prompt "Freecom FSG-3"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Freecom's
+	  FSG-3 device. For more information on this platform,
+	  see http://www.nslu2-linux.org/wiki/FSG3/HomePage
+
 #
 # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
 #
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index c1956882c48b..2e6bbf927a74 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
 obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
 obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
 obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
 
 obj-y	+= common.o
 
@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
 obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index f6d66dce6852..3781b3db9f49 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -326,11 +326,11 @@ static struct resource ixp4xx_udc_resources[] = {
 };
 
 /*
- * USB device controller. The IXP4xx uses the same controller as PXA2XX,
+ * USB device controller. The IXP4xx uses the same controller as PXA25X,
  * so we just use the same device.
  */
 static struct platform_device ixp4xx_udc_device = {
-	.name           = "pxa2xx-udc",
+	.name           = "pxa25x-udc",
 	.id             = -1,
 	.num_resources  = 2,
 	.resource       = ixp4xx_udc_resources,
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
new file mode 100644
index 000000000000..f19f3f6feda1
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/fsg-pci.c
+ *
+ * FSG board-level PCI initialization
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init fsg_pci_preinit(void)
+{
+	set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
+		IRQ_FSG_PCI_INTC,
+		IRQ_FSG_PCI_INTB,
+		IRQ_FSG_PCI_INTA,
+	};
+
+	int irq = -1;
+	slot = slot - 11;
+
+	if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
+	    pin >= 1 && pin <= FSG_PCI_IRQ_LINES)
+		irq = pci_irq_table[(slot - 1)];
+	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
+	       __func__, slot, pin, irq);
+
+	return irq;
+}
+
+struct hw_pci fsg_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =	  fsg_pci_preinit,
+	.swizzle =	  pci_std_swizzle,
+	.setup =	  ixp4xx_setup,
+	.scan =		  ixp4xx_scan_bus,
+	.map_irq =	  fsg_map_irq,
+};
+
+int __init fsg_pci_init(void)
+{
+	if (machine_is_fsg())
+		pci_common_init(&fsg_pci);
+	return 0;
+}
+
+subsys_initcall(fsg_pci_init);
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
new file mode 100644
index 000000000000..0db3a909ae61
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-ixp4xx/fsg-setup.c
+ *
+ * FSG board-setup
+ *
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * based on ixdp425-setup.c:
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c
+ *	Copyright (C) 2005 Tower Technologies
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ */
+
+#include <linux/if_ether.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+static struct flash_platform_data fsg_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 2,
+};
+
+static struct resource fsg_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device fsg_flash = {
+	.name			= "IXP4XX-Flash",
+	.id			= 0,
+	.dev = {
+		.platform_data	= &fsg_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &fsg_flash_resource,
+};
+
+static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
+	.sda_pin		= FSG_SDA_PIN,
+	.scl_pin		= FSG_SCL_PIN,
+};
+
+static struct platform_device fsg_i2c_gpio = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev = {
+		.platform_data	= &fsg_i2c_gpio_data,
+	},
+};
+
+static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
+	{
+		I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+	},
+};
+
+static struct resource fsg_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port fsg_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ }
+};
+
+static struct platform_device fsg_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data	= fsg_uart_data,
+	},
+	.num_resources		= ARRAY_SIZE(fsg_uart_resources),
+	.resource		= fsg_uart_resources,
+};
+
+static struct platform_device fsg_leds = {
+	.name		= "fsg-led",
+	.id		= -1,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info fsg_plat_eth[] = {
+	{
+		.phy		= 5,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 4,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device fsg_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev = {
+			.platform_data	= fsg_plat_eth,
+		},
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev = {
+			.platform_data	= fsg_plat_eth + 1,
+		},
+	}
+};
+
+static struct platform_device *fsg_devices[] __initdata = {
+	&fsg_i2c_gpio,
+	&fsg_flash,
+	&fsg_leds,
+	&fsg_eth[0],
+	&fsg_eth[1],
+};
+
+static irqreturn_t fsg_power_handler(int irq, void *dev_id)
+{
+	/* Signal init to do the ctrlaltdel action, this will bypass init if
+	 * it hasn't started and do a kernel_restart.
+	 */
+	ctrl_alt_del();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
+{
+	/* This is the paper-clip reset which does an emergency reboot. */
+	printk(KERN_INFO "Restarting system.\n");
+	machine_restart(NULL);
+
+	/* This should never be reached. */
+	return IRQ_HANDLED;
+}
+
+static void __init fsg_init(void)
+{
+	DECLARE_MAC_BUF(mac_buf);
+	uint8_t __iomem *f;
+	int i;
+
+	ixp4xx_sys_init();
+
+	fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	fsg_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	/* Configure CS2 for operation, 8bit and writable */
+	*IXP4XX_EXP_CS2 = 0xbfff0002;
+
+	i2c_register_board_info(0, fsg_i2c_board_info,
+				ARRAY_SIZE(fsg_i2c_board_info));
+
+	/* This is only useful on a modified machine, but it is valuable
+	 * to have it first in order to see debug messages, and so that
+	 * it does *not* get removed if platform_add_devices fails!
+	 */
+	(void)platform_device_register(&fsg_uart);
+
+	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
+
+	if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
+			IRQF_DISABLED | IRQF_TRIGGER_LOW,
+			"FSG reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			gpio_to_irq(FSG_RB_GPIO));
+	}
+
+	if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
+			IRQF_DISABLED | IRQF_TRIGGER_LOW,
+			"FSG power button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
+			gpio_to_irq(FSG_SB_GPIO));
+	}
+
+	/*
+	 * Map in a portion of the flash and read the MAC addresses.
+	 * Since it is stored in BE in the flash itself, we need to
+	 * byteswap it if we're in LE mode.
+	 */
+	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
+	if (f) {
+#ifdef __ARMEB__
+		for (i = 0; i < 6; i++) {
+			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
+			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
+		}
+#else
+
+		/*
+		  Endian-swapped reads from unaligned addresses are
+		  required to extract the two MACs from the big-endian
+		  Redboot config area in flash.
+		*/
+
+		fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
+		fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
+		fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
+		fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
+		fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
+		fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
+
+		fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
+		fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
+		fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
+		fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
+		fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
+		fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
+#endif
+		iounmap(f);
+	}
+	printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
+	       print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
+	printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
+	       print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
+
+}
+
+MACHINE_START(FSG, "Freecom FSG-3")
+	/* Maintainer: www.nslu2-linux.org */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= fsg_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
new file mode 100644
index 000000000000..3600cd9f0519
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -0,0 +1,25 @@
+if ARCH_KIRKWOOD
+
+menu "Marvell Kirkwood Implementations"
+
+config MACH_DB88F6281_BP
+	bool "Marvell DB-88F6281-BP Development Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DB-88F6281-BP Development Board.
+
+config MACH_RD88F6192_NAS
+	bool "Marvell RD-88F6192-NAS Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell RD-88F6192-NAS Reference Board.
+
+config MACH_RD88F6281
+	bool "Marvell RD-88F6281 Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell RD-88F6281 Reference Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
new file mode 100644
index 000000000000..e14bf40bfb07
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -0,0 +1,5 @@
+obj-y				+= common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6281-setup.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
new file mode 100644
index 000000000000..a39f0f3c4730
--- /dev/null
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/mach-kirkwood/addr-map.c
+ *
+ * Address map functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/hardware.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR		0
+#define TARGET_DEV_BUS		1
+#define TARGET_PCIE		4
+#define ATTR_DEV_SPI_ROM	0x1e
+#define ATTR_DEV_BOOT		0x1d
+#define ATTR_DEV_NAND		0x2f
+#define ATTR_DEV_CS3		0x37
+#define ATTR_DEV_CS2		0x3b
+#define ATTR_DEV_CS1		0x3d
+#define ATTR_DEV_CS0		0x3e
+#define ATTR_PCIE_IO		0xe0
+#define ATTR_PCIE_MEM		0xe8
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
+#define WIN_CTRL_OFF		0x0000
+#define WIN_BASE_OFF		0x0004
+#define WIN_REMAP_LO_OFF	0x0008
+#define WIN_REMAP_HI_OFF	0x000c
+
+
+struct mbus_dram_target_info kirkwood_mbus_dram_info;
+
+static int __init cpu_win_can_remap(int win)
+{
+	if (win < 4)
+		return 1;
+
+	return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+				 u8 target, u8 attr, int remap)
+{
+	void __iomem *addr = (void __iomem *)WIN_OFF(win);
+	u32 ctrl;
+
+	base &= 0xffff0000;
+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+	writel(base, addr + WIN_BASE_OFF);
+	writel(ctrl, addr + WIN_CTRL_OFF);
+	if (cpu_win_can_remap(win)) {
+		if (remap < 0)
+			remap = base;
+
+		writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
+		writel(0, addr + WIN_REMAP_HI_OFF);
+	}
+}
+
+void __init kirkwood_setup_cpu_mbus(void)
+{
+	void __iomem *addr;
+	int i;
+	int cs;
+
+	/*
+	 * First, disable and clear windows.
+	 */
+	for (i = 0; i < 8; i++) {
+		addr = (void __iomem *)WIN_OFF(i);
+
+		writel(0, addr + WIN_BASE_OFF);
+		writel(0, addr + WIN_CTRL_OFF);
+		if (cpu_win_can_remap(i)) {
+			writel(0, addr + WIN_REMAP_LO_OFF);
+			writel(0, addr + WIN_REMAP_HI_OFF);
+		}
+	}
+
+	/*
+	 * Setup windows for PCIe IO+MEM space.
+	 */
+	setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
+		      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
+	setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
+		      TARGET_PCIE, ATTR_PCIE_MEM, -1);
+
+	/*
+	 * Setup window for NAND controller.
+	 */
+	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	addr = (void __iomem *)DDR_WINDOW_CPU_BASE;
+
+	for (i = 0, cs = 0; i < 4; i++) {
+		u32 base = readl(addr + DDR_BASE_CS_OFF(i));
+		u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (size & 1) {
+			struct mbus_dram_window *w;
+
+			w = &kirkwood_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0xf & ~(1 << i);
+			w->base = base & 0xffff0000;
+			w->size = (size | 0x0000ffff) + 1;
+		}
+	}
+	kirkwood_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
new file mode 100644
index 000000000000..5938a3b33cdc
--- /dev/null
+++ b/arch/arm/mach-kirkwood/common.c
@@ -0,0 +1,331 @@
+/*
+ * arch/arm/mach-kirkwood/common.c
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <asm/page.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <asm/plat-orion/ehci-orion.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc kirkwood_io_desc[] __initdata = {
+	{
+		.virtual	= KIRKWOOD_PCIE_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
+		.length		= KIRKWOOD_PCIE_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+		.length		= KIRKWOOD_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init kirkwood_map_io(void)
+{
+	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data kirkwood_ehci_data = {
+	.dram		= &kirkwood_mbus_dram_info,
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource kirkwood_ehci_resources[] = {
+	{
+		.start	= USB_PHYS_BASE,
+		.end	= USB_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_KIRKWOOD_USB,
+		.end	= IRQ_KIRKWOOD_USB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_ehci = {
+	.name		= "orion-ehci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &kirkwood_ehci_data,
+	},
+	.resource	= kirkwood_ehci_resources,
+	.num_resources	= ARRAY_SIZE(kirkwood_ehci_resources),
+};
+
+void __init kirkwood_ehci_init(void)
+{
+	platform_device_register(&kirkwood_ehci);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data kirkwood_ge00_shared_data = {
+	.t_clk		= KIRKWOOD_TCLK,
+	.dram		= &kirkwood_mbus_dram_info,
+};
+
+static struct resource kirkwood_ge00_shared_resources[] = {
+	{
+		.name	= "ge00 base",
+		.start	= GE00_PHYS_BASE + 0x2000,
+		.end	= GE00_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_ge00_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &kirkwood_ge00_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= kirkwood_ge00_shared_resources,
+};
+
+static struct resource kirkwood_ge00_resources[] = {
+	{
+		.name	= "ge00 irq",
+		.start	= IRQ_KIRKWOOD_GE00_SUM,
+		.end	= IRQ_KIRKWOOD_GE00_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_ge00 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= kirkwood_ge00_resources,
+};
+
+void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &kirkwood_ge00_shared;
+	kirkwood_ge00.dev.platform_data = eth_data;
+
+	platform_device_register(&kirkwood_ge00_shared);
+	platform_device_register(&kirkwood_ge00);
+}
+
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource kirkwood_rtc_resource = {
+	.start	= RTC_PHYS_BASE,
+	.end	= RTC_PHYS_BASE + SZ_16 - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+void __init kirkwood_rtc_init(void)
+{
+	platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource kirkwood_sata_resources[] = {
+	{
+		.name	= "sata base",
+		.start	= SATA_PHYS_BASE,
+		.end	= SATA_PHYS_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "sata irq",
+		.start	= IRQ_KIRKWOOD_SATA,
+		.end	= IRQ_KIRKWOOD_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_sata = {
+	.name		= "sata_mv",
+	.id		= 0,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_sata_resources),
+	.resource	= kirkwood_sata_resources,
+};
+
+void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	sata_data->dram = &kirkwood_mbus_dram_info;
+	kirkwood_sata.dev.platform_data = sata_data;
+	platform_device_register(&kirkwood_sata);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port kirkwood_uart0_data[] = {
+	{
+		.mapbase	= UART0_PHYS_BASE,
+		.membase	= (char *)UART0_VIRT_BASE,
+		.irq		= IRQ_KIRKWOOD_UART_0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= KIRKWOOD_TCLK,
+	}, {
+	},
+};
+
+static struct resource kirkwood_uart0_resources[] = {
+	{
+		.start		= UART0_PHYS_BASE,
+		.end		= UART0_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_KIRKWOOD_UART_0,
+		.end		= IRQ_KIRKWOOD_UART_0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_uart0 = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= kirkwood_uart0_data,
+	},
+	.resource		= kirkwood_uart0_resources,
+	.num_resources		= ARRAY_SIZE(kirkwood_uart0_resources),
+};
+
+void __init kirkwood_uart0_init(void)
+{
+	platform_device_register(&kirkwood_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port kirkwood_uart1_data[] = {
+	{
+		.mapbase	= UART1_PHYS_BASE,
+		.membase	= (char *)UART1_VIRT_BASE,
+		.irq		= IRQ_KIRKWOOD_UART_1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= KIRKWOOD_TCLK,
+	}, {
+	},
+};
+
+static struct resource kirkwood_uart1_resources[] = {
+	{
+		.start		= UART1_PHYS_BASE,
+		.end		= UART1_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_KIRKWOOD_UART_1,
+		.end		= IRQ_KIRKWOOD_UART_1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_uart1 = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= kirkwood_uart1_data,
+	},
+	.resource		= kirkwood_uart1_resources,
+	.num_resources		= ARRAY_SIZE(kirkwood_uart1_resources),
+};
+
+void __init kirkwood_uart1_init(void)
+{
+	platform_device_register(&kirkwood_uart1);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void kirkwood_timer_init(void)
+{
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, KIRKWOOD_TCLK);
+}
+
+struct sys_timer kirkwood_timer = {
+	.init = kirkwood_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+static char * __init kirkwood_id(void)
+{
+	switch (readl(DEVICE_ID) & 0x3) {
+	case 0:
+		return "88F6180";
+	case 1:
+		return "88F6192";
+	case 2:
+		return "88F6281";
+	}
+
+	return "unknown 88F6000 variant";
+}
+
+static int __init is_l2_writethrough(void)
+{
+	return !!(readl(L2_CONFIG_REG) & L2_WRITETHROUGH);
+}
+
+void __init kirkwood_init(void)
+{
+	printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
+		kirkwood_id(), KIRKWOOD_TCLK);
+
+	kirkwood_setup_cpu_mbus();
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_l2_init(is_l2_writethrough());
+#endif
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
new file mode 100644
index 000000000000..5dee2f6b40a5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/common.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-kirkwood/common.h
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_COMMON_H
+#define __ARCH_KIRKWOOD_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+/*
+ * Basic Kirkwood init functions used early by machine-setup.
+ */
+void kirkwood_map_io(void);
+void kirkwood_init(void);
+void kirkwood_init_irq(void);
+
+extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
+void kirkwood_setup_cpu_mbus(void);
+void kirkwood_setup_pcie_io_win(int window, u32 base, u32 size,
+				int maj, int min);
+void kirkwood_setup_pcie_mem_win(int window, u32 base, u32 size,
+				 int maj, int min);
+
+void kirkwood_ehci_init(void);
+void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_pcie_init(void);
+void kirkwood_rtc_init(void);
+void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_uart0_init(void);
+void kirkwood_uart1_init(void);
+
+extern struct sys_timer kirkwood_timer;
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
new file mode 100644
index 000000000000..d5c482c628e3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+ *
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
+	.phy_addr	= 8,
+};
+
+static struct mv_sata_platform_data db88f6281_sata_data = {
+	.n_ports	= 2,
+};
+
+static void __init db88f6281_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&db88f6281_ge00_data);
+	kirkwood_rtc_init();
+	kirkwood_sata_init(&db88f6281_sata_data);
+	kirkwood_uart0_init();
+	kirkwood_uart1_init();
+}
+
+static int __init db88f6281_pci_init(void)
+{
+	if (machine_is_db88f6281_bp())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(db88f6281_pci_init);
+
+MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
+	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= db88f6281_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
new file mode 100644
index 000000000000..302bb2cf6669
--- /dev/null
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-kirkwood/irq.c
+ *
+ * Kirkwood IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init kirkwood_init_irq(void)
+{
+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+}
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
new file mode 100644
index 000000000000..8282d0ff84bf
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-kirkwood/pcie.c
+ *
+ * PCIe functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+#include "common.h"
+
+
+#define PCIE_BASE	((void __iomem *)PCIE_VIRT_BASE)
+
+static int pcie_valid_config(int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access --
+	 * 1. nonexisting device on local bus
+	 * 2. where there's no device connected (no link)
+	 */
+	if (bus == 0 && dev == 0)
+		return 1;
+
+	if (!orion_pcie_link_up(PCIE_BASE))
+		return 0;
+
+	if (bus == 0 && dev != 1)
+		return 0;
+
+	return 1;
+}
+
+
+/*
+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(kirkwood_pcie_lock);
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
+	ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
+	ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+
+static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct resource *res;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
+
+	/*
+	 * Request resources.
+	 */
+	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+	if (!res)
+		panic("pcie_setup unable to alloc resources");
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	res[0].name = "PCIe I/O Space";
+	res[0].flags = IORESOURCE_IO;
+	res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+	res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
+	if (request_resource(&ioport_resource, &res[0]))
+		panic("Request PCIe IO resource failed\n");
+	sys->resource[0] = &res[0];
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	res[1].name = "PCIe Memory Space";
+	res[1].flags = IORESOURCE_MEM;
+	res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+	res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+	if (request_resource(&iomem_resource, &res[1]))
+		panic("Request PCIe Memory resource failed\n");
+	sys->resource[1] = &res[1];
+
+	sys->resource[2] = NULL;
+	sys->io_offset = 0;
+
+	return 1;
+}
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex.
+	 */
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct pci_bus *bus;
+
+	if (nr == 0) {
+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
+
+static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return IRQ_KIRKWOOD_PCIE;
+}
+
+static struct hw_pci kirkwood_pci __initdata = {
+	.nr_controllers	= 1,
+	.swizzle	= pci_std_swizzle,
+	.setup		= kirkwood_pcie_setup,
+	.scan		= kirkwood_pcie_scan_bus,
+	.map_irq	= kirkwood_pcie_map_irq,
+};
+
+void __init kirkwood_pcie_init(void)
+{
+	pci_common_init(&kirkwood_pci);
+}
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
new file mode 100644
index 000000000000..6cf642c504d3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+ *
+ * Marvell RD-88F6192-NAS Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include "common.h"
+
+#define RD88F6192_GPIO_USB_VBUS		10
+
+static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
+	.phy_addr	= 8,
+};
+
+static struct mv_sata_platform_data rd88f6192_sata_data = {
+	.n_ports	= 2,
+};
+
+static void __init rd88f6192_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&rd88f6192_ge00_data);
+	kirkwood_rtc_init();
+	kirkwood_sata_init(&rd88f6192_sata_data);
+	kirkwood_uart0_init();
+}
+
+static int __init rd88f6192_pci_init(void)
+{
+	if (machine_is_rd88f6192_nas())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(rd88f6192_pci_init);
+
+MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
+	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= rd88f6192_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
new file mode 100644
index 000000000000..e1f8de2c74a2
--- /dev/null
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6281-setup.c
+ *
+ * Marvell RD-88F6281 Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/plat-orion/orion_nand.h>
+#include "common.h"
+
+static struct mtd_partition rd88f6281_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_2M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct resource rd88f6281_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+			  KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data rd88f6281_nand_data = {
+	.parts		= rd88f6281_nand_parts,
+	.nr_parts	= ARRAY_SIZE(rd88f6281_nand_parts),
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+	.chip_delay	= 25,
+};
+
+static struct platform_device rd88f6281_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &rd88f6281_nand_data,
+	},
+	.resource	= &rd88f6281_nand_resource,
+	.num_resources	= 1,
+};
+
+static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
+	.phy_addr	= -1,
+};
+
+static struct mv_sata_platform_data rd88f6281_sata_data = {
+	.n_ports	= 2,
+};
+
+static void __init rd88f6281_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&rd88f6281_ge00_data);
+	kirkwood_rtc_init();
+	kirkwood_sata_init(&rd88f6281_sata_data);
+	kirkwood_uart0_init();
+	kirkwood_uart1_init();
+
+	platform_device_register(&rd88f6281_nand_flash);
+}
+
+static int __init rd88f6281_pci_init(void)
+{
+	if (machine_is_rd88f6281())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(rd88f6281_pci_init);
+
+MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
+	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= rd88f6281_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-loki/Kconfig b/arch/arm/mach-loki/Kconfig
new file mode 100644
index 000000000000..0045bdd761ca
--- /dev/null
+++ b/arch/arm/mach-loki/Kconfig
@@ -0,0 +1,13 @@
+if ARCH_LOKI
+
+menu "Marvell Loki (88RC8480) Implementations"
+
+config MACH_LB88RC8480
+	bool "Marvell LB88RC8480 Development Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell LB88RC8480 Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-loki/Makefile b/arch/arm/mach-loki/Makefile
new file mode 100644
index 000000000000..d43233ee590f
--- /dev/null
+++ b/arch/arm/mach-loki/Makefile
@@ -0,0 +1,3 @@
+obj-y				+= common.o addr-map.o irq.o
+
+obj-$(CONFIG_MACH_LB88RC8480)	+= lb88rc8480-setup.o
diff --git a/arch/arm/mach-loki/Makefile.boot b/arch/arm/mach-loki/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-loki/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
new file mode 100644
index 000000000000..ba25e56ade58
--- /dev/null
+++ b/arch/arm/mach-loki/addr-map.c
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-loki/addr-map.c
+ *
+ * Address map functions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR		0
+#define TARGET_DEV_BUS		1
+#define TARGET_PCIE0		3
+#define TARGET_PCIE1		4
+#define ATTR_DEV_BOOT		0x0f
+#define ATTR_DEV_CS2		0x1b
+#define ATTR_DEV_CS1		0x1d
+#define ATTR_DEV_CS0		0x1e
+#define ATTR_PCIE_IO		0x51
+#define ATTR_PCIE_MEM		0x59
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_SIZE_CS(n)		DDR_REG(0x1500 + ((n) << 3))
+#define DDR_BASE_CS(n)		DDR_REG(0x1504 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define CPU_WIN_CTRL(n)		BRIDGE_REG(0x000 | ((n) << 4))
+#define CPU_WIN_BASE(n)		BRIDGE_REG(0x004 | ((n) << 4))
+#define CPU_WIN_REMAP_LO(n)	BRIDGE_REG(0x008 | ((n) << 4))
+#define CPU_WIN_REMAP_HI(n)	BRIDGE_REG(0x00c | ((n) << 4))
+
+
+struct mbus_dram_target_info loki_mbus_dram_info;
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+				 u8 target, u8 attr, int remap)
+{
+	u32 ctrl;
+
+	base &= 0xffff0000;
+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (1 << 5) | target;
+
+	writel(base, CPU_WIN_BASE(win));
+	writel(ctrl, CPU_WIN_CTRL(win));
+	if (win < 2) {
+		if (remap < 0)
+			remap = base;
+
+		writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
+		writel(0, CPU_WIN_REMAP_HI(win));
+	}
+}
+
+void __init loki_setup_cpu_mbus(void)
+{
+	int i;
+	int cs;
+
+	/*
+	 * First, disable and clear windows.
+	 */
+	for (i = 0; i < 8; i++) {
+		writel(0, CPU_WIN_BASE(i));
+		writel(0, CPU_WIN_CTRL(i));
+		if (i < 2) {
+			writel(0, CPU_WIN_REMAP_LO(i));
+			writel(0, CPU_WIN_REMAP_HI(i));
+		}
+	}
+
+	/*
+	 * Setup windows for PCIe IO+MEM space.
+	 */
+	setup_cpu_win(2, LOKI_PCIE0_MEM_PHYS_BASE, LOKI_PCIE0_MEM_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+	setup_cpu_win(3, LOKI_PCIE1_MEM_PHYS_BASE, LOKI_PCIE1_MEM_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	loki_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 4; i++) {
+		u32 base = readl(DDR_BASE_CS(i));
+		u32 size = readl(DDR_SIZE_CS(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (size & 1) {
+			struct mbus_dram_window *w;
+
+			w = &loki_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0xf & ~(1 << i);
+			w->base = base & 0xffff0000;
+			w->size = (size | 0x0000ffff) + 1;
+		}
+	}
+	loki_mbus_dram_info.num_cs = cs;
+}
+
+void __init loki_setup_dev_boot_win(u32 base, u32 size)
+{
+	setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+}
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
new file mode 100644
index 000000000000..410f50399dd3
--- /dev/null
+++ b/arch/arm/mach-loki/common.c
@@ -0,0 +1,305 @@
+/*
+ * arch/arm/mach-loki/common.c
+ *
+ * Core functions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/page.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/loki.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc loki_io_desc[] __initdata = {
+	{
+		.virtual	= LOKI_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(LOKI_REGS_PHYS_BASE),
+		.length		= LOKI_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init loki_map_io(void)
+{
+	iotable_init(loki_io_desc, ARRAY_SIZE(loki_io_desc));
+}
+
+
+/*****************************************************************************
+ * GE0
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data loki_ge0_shared_data = {
+	.t_clk		= LOKI_TCLK,
+	.dram		= &loki_mbus_dram_info,
+};
+
+static struct resource loki_ge0_shared_resources[] = {
+	{
+		.name	= "ge0 base",
+		.start	= GE0_PHYS_BASE + 0x2000,
+		.end	= GE0_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device loki_ge0_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &loki_ge0_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= loki_ge0_shared_resources,
+};
+
+static struct resource loki_ge0_resources[] = {
+	{
+		.name	= "ge0 irq",
+		.start	= IRQ_LOKI_GBE_A_INT,
+		.end	= IRQ_LOKI_GBE_A_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device loki_ge0 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= loki_ge0_resources,
+};
+
+void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &loki_ge0_shared;
+	loki_ge0.dev.platform_data = eth_data;
+
+	writel(0x00079220, GE0_VIRT_BASE + 0x20b0);
+	platform_device_register(&loki_ge0_shared);
+	platform_device_register(&loki_ge0);
+}
+
+
+/*****************************************************************************
+ * GE1
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data loki_ge1_shared_data = {
+	.t_clk		= LOKI_TCLK,
+	.dram		= &loki_mbus_dram_info,
+};
+
+static struct resource loki_ge1_shared_resources[] = {
+	{
+		.name	= "ge1 base",
+		.start	= GE1_PHYS_BASE + 0x2000,
+		.end	= GE1_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device loki_ge1_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &loki_ge1_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= loki_ge1_shared_resources,
+};
+
+static struct resource loki_ge1_resources[] = {
+	{
+		.name	= "ge1 irq",
+		.start	= IRQ_LOKI_GBE_B_INT,
+		.end	= IRQ_LOKI_GBE_B_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device loki_ge1 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= loki_ge1_resources,
+};
+
+void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &loki_ge1_shared;
+	loki_ge1.dev.platform_data = eth_data;
+
+	writel(0x00079220, GE1_VIRT_BASE + 0x20b0);
+	platform_device_register(&loki_ge1_shared);
+	platform_device_register(&loki_ge1);
+}
+
+
+/*****************************************************************************
+ * SAS/SATA
+ ****************************************************************************/
+static struct resource loki_sas_resources[] = {
+	{
+		.name	= "mvsas0 mem",
+		.start	= SAS0_PHYS_BASE,
+		.end	= SAS0_PHYS_BASE + 0x01ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "mvsas0 irq",
+		.start	= IRQ_LOKI_SAS_A,
+		.end	= IRQ_LOKI_SAS_A,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "mvsas1 mem",
+		.start	= SAS1_PHYS_BASE,
+		.end	= SAS1_PHYS_BASE + 0x01ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "mvsas1 irq",
+		.start	= IRQ_LOKI_SAS_B,
+		.end	= IRQ_LOKI_SAS_B,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device loki_sas = {
+	.name		= "mvsas",
+	.id		= 0,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(loki_sas_resources),
+	.resource	= loki_sas_resources,
+};
+
+void __init loki_sas_init(void)
+{
+	writel(0x8300f707, DDR_REG(0x1424));
+	platform_device_register(&loki_sas);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port loki_uart0_data[] = {
+	{
+		.mapbase	= UART0_PHYS_BASE,
+		.membase	= (char *)UART0_VIRT_BASE,
+		.irq		= IRQ_LOKI_UART0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= LOKI_TCLK,
+	}, {
+	},
+};
+
+static struct resource loki_uart0_resources[] = {
+	{
+		.start		= UART0_PHYS_BASE,
+		.end		= UART0_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_LOKI_UART0,
+		.end		= IRQ_LOKI_UART0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device loki_uart0 = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= loki_uart0_data,
+	},
+	.resource		= loki_uart0_resources,
+	.num_resources		= ARRAY_SIZE(loki_uart0_resources),
+};
+
+void __init loki_uart0_init(void)
+{
+	platform_device_register(&loki_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port loki_uart1_data[] = {
+	{
+		.mapbase	= UART1_PHYS_BASE,
+		.membase	= (char *)UART1_VIRT_BASE,
+		.irq		= IRQ_LOKI_UART1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= LOKI_TCLK,
+	}, {
+	},
+};
+
+static struct resource loki_uart1_resources[] = {
+	{
+		.start		= UART1_PHYS_BASE,
+		.end		= UART1_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_LOKI_UART1,
+		.end		= IRQ_LOKI_UART1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device loki_uart1 = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= loki_uart1_data,
+	},
+	.resource		= loki_uart1_resources,
+	.num_resources		= ARRAY_SIZE(loki_uart1_resources),
+};
+
+void __init loki_uart1_init(void)
+{
+	platform_device_register(&loki_uart1);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void loki_timer_init(void)
+{
+	orion_time_init(IRQ_LOKI_BRIDGE, LOKI_TCLK);
+}
+
+struct sys_timer loki_timer = {
+	.init = loki_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+void __init loki_init(void)
+{
+	printk(KERN_INFO "Loki ID: 88RC8480. TCLK=%d.\n", LOKI_TCLK);
+
+	loki_setup_cpu_mbus();
+}
diff --git a/arch/arm/mach-loki/common.h b/arch/arm/mach-loki/common.h
new file mode 100644
index 000000000000..26054fd0f05e
--- /dev/null
+++ b/arch/arm/mach-loki/common.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-loki/common.h
+ *
+ * Core functions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_LOKI_COMMON_H
+#define __ARCH_LOKI_COMMON_H
+
+struct mv643xx_eth_platform_data;
+
+/*
+ * Basic Loki init functions used early by machine-setup.
+ */
+void loki_map_io(void);
+void loki_init(void);
+void loki_init_irq(void);
+
+extern struct mbus_dram_target_info loki_mbus_dram_info;
+void loki_setup_cpu_mbus(void);
+void loki_setup_dev_boot_win(u32 base, u32 size);
+
+void loki_ge0_init(struct mv643xx_eth_platform_data *eth_data);
+void loki_ge1_init(struct mv643xx_eth_platform_data *eth_data);
+void loki_sas_init(void);
+void loki_uart0_init(void);
+void loki_uart1_init(void);
+
+extern struct sys_timer loki_timer;
+
+
+#endif
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
new file mode 100644
index 000000000000..d839af91fe03
--- /dev/null
+++ b/arch/arm/mach-loki/irq.c
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-loki/irq.c
+ *
+ * Marvell Loki (88RC8480) IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init loki_init_irq(void)
+{
+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_OFF));
+}
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
new file mode 100644
index 000000000000..d1b9e6e6253a
--- /dev/null
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-loki/lb88rc8480-setup.c
+ *
+ * Marvell LB88RC8480 Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/loki.h>
+#include "common.h"
+
+#define LB88RC8480_FLASH_BOOT_CS_BASE	0xf8000000
+#define LB88RC8480_FLASH_BOOT_CS_SIZE	SZ_128M
+
+#define LB88RC8480_NOR_BOOT_BASE	0xff000000
+#define LB88RC8480_NOR_BOOT_SIZE	SZ_16M
+
+static struct mtd_partition lb88rc8480_boot_flash_parts[] = {
+	{
+		.name	= "kernel",
+		.offset	= 0,
+		.size	= SZ_2M,
+	}, {
+		.name	= "root-fs",
+		.offset	= SZ_2M,
+		.size	= (SZ_8M + SZ_4M + SZ_1M),
+	}, {
+		.name	= "u-boot",
+		.offset	= (SZ_8M + SZ_4M + SZ_2M + SZ_1M),
+		.size	= SZ_1M,
+	},
+};
+
+static struct physmap_flash_data lb88rc8480_boot_flash_data = {
+	.parts		= lb88rc8480_boot_flash_parts,
+	.nr_parts	= ARRAY_SIZE(lb88rc8480_boot_flash_parts),
+	.width		= 1,	/* 8 bit bus width */
+};
+
+static struct resource lb88rc8480_boot_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= LB88RC8480_NOR_BOOT_BASE,
+	.end	= LB88RC8480_NOR_BOOT_BASE + LB88RC8480_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device lb88rc8480_boot_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data	= &lb88rc8480_boot_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &lb88rc8480_boot_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = {
+	.phy_addr	= 1,
+	.mac_addr	= { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 },
+};
+
+static void __init lb88rc8480_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	loki_init();
+
+	loki_ge0_init(&lb88rc8480_ge0_data);
+	loki_sas_init();
+	loki_uart0_init();
+	loki_uart1_init();
+
+	loki_setup_dev_boot_win(LB88RC8480_FLASH_BOOT_CS_BASE,
+				LB88RC8480_FLASH_BOOT_CS_SIZE);
+	platform_device_register(&lb88rc8480_boot_flash);
+}
+
+MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
+	/* Maintainer: Ke Wei <kewei@marvell.com> */
+	.phys_io	= LOKI_REGS_PHYS_BASE,
+	.io_pg_offst	= ((LOKI_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= lb88rc8480_init,
+	.map_io		= loki_map_io,
+	.init_irq	= loki_init_irq,
+	.timer		= &loki_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
new file mode 100644
index 000000000000..d83cb86837db
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -0,0 +1,13 @@
+if ARCH_MV78XX0
+
+menu "Marvell MV78xx0 Implementations"
+
+config MACH_DB78X00_BP
+	bool "Marvell DB-78x00-BP Development Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DB-78x00-BP Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
new file mode 100644
index 000000000000..ec16c05c3b1b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -0,0 +1,2 @@
+obj-y				+= common.o addr-map.o irq.o pcie.o
+obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
new file mode 100644
index 000000000000..4004b672a2eb
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -0,0 +1,156 @@
+/*
+ * arch/arm/mach-mv78xx0/addr-map.c
+ *
+ * Address map functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/io.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR		0
+#define TARGET_DEV_BUS		1
+#define TARGET_PCIE0		4
+#define TARGET_PCIE1		8
+#define TARGET_PCIE(i)		((i) ? TARGET_PCIE1 : TARGET_PCIE0)
+#define ATTR_DEV_SPI_ROM	0x1f
+#define ATTR_DEV_BOOT		0x2f
+#define ATTR_DEV_CS3		0x37
+#define ATTR_DEV_CS2		0x3b
+#define ATTR_DEV_CS1		0x3d
+#define ATTR_DEV_CS0		0x3e
+#define ATTR_PCIE_IO(l)		(0xf0 & ~(0x10 << (l)))
+#define ATTR_PCIE_MEM(l)	(0xf8 & ~(0x10 << (l)))
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
+#define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
+#define WIN_CTRL_OFF		0x0000
+#define WIN_BASE_OFF		0x0004
+#define WIN_REMAP_LO_OFF	0x0008
+#define WIN_REMAP_HI_OFF	0x000c
+
+
+struct mbus_dram_target_info mv78xx0_mbus_dram_info;
+
+static void __init __iomem *win_cfg_base(int win)
+{
+	/*
+	 * Find the control register base address for this window.
+	 *
+	 * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's)
+	 * MBUS bridge depending on which CPU core we're running on,
+	 * so we don't need to take that into account here.
+	 */
+
+	return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
+}
+
+static int __init cpu_win_can_remap(int win)
+{
+	if (win < 8)
+		return 1;
+
+	return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+				 u8 target, u8 attr, int remap)
+{
+	void __iomem *addr = win_cfg_base(win);
+	u32 ctrl;
+
+	base &= 0xffff0000;
+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+	writel(base, addr + WIN_BASE_OFF);
+	writel(ctrl, addr + WIN_CTRL_OFF);
+	if (cpu_win_can_remap(win)) {
+		if (remap < 0)
+			remap = base;
+
+		writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
+		writel(0, addr + WIN_REMAP_HI_OFF);
+	}
+}
+
+void __init mv78xx0_setup_cpu_mbus(void)
+{
+	void __iomem *addr;
+	int i;
+	int cs;
+
+	/*
+	 * First, disable and clear windows.
+	 */
+	for (i = 0; i < 14; i++) {
+		addr = win_cfg_base(i);
+
+		writel(0, addr + WIN_BASE_OFF);
+		writel(0, addr + WIN_CTRL_OFF);
+		if (cpu_win_can_remap(i)) {
+			writel(0, addr + WIN_REMAP_LO_OFF);
+			writel(0, addr + WIN_REMAP_HI_OFF);
+		}
+	}
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	if (mv78xx0_core_index() == 0)
+		addr = (void __iomem *)DDR_WINDOW_CPU0_BASE;
+	else
+		addr = (void __iomem *)DDR_WINDOW_CPU1_BASE;
+
+	for (i = 0, cs = 0; i < 4; i++) {
+		u32 base = readl(addr + DDR_BASE_CS_OFF(i));
+		u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (size & 1) {
+			struct mbus_dram_window *w;
+
+			w = &mv78xx0_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0xf & ~(1 << i);
+			w->base = base & 0xffff0000;
+			w->size = (size | 0x0000ffff) + 1;
+		}
+	}
+	mv78xx0_mbus_dram_info.num_cs = cs;
+}
+
+void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
+				      int maj, int min)
+{
+	setup_cpu_win(window, base, size, TARGET_PCIE(maj),
+		      ATTR_PCIE_IO(min), -1);
+}
+
+void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
+				       int maj, int min)
+{
+	setup_cpu_win(window, base, size, TARGET_PCIE(maj),
+		      ATTR_PCIE_MEM(min), -1);
+}
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
new file mode 100644
index 000000000000..d27b83b7bf62
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -0,0 +1,754 @@
+/*
+ * arch/arm/mach-mv78xx0/common.c
+ *
+ * Core functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/mv78xx0.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <asm/plat-orion/ehci-orion.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+
+/*****************************************************************************
+ * Common bits
+ ****************************************************************************/
+int mv78xx0_core_index(void)
+{
+	u32 extra;
+
+	/*
+	 * Read Extra Features register.
+	 */
+	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra));
+
+	return !!(extra & 0x00004000);
+}
+
+static int get_hclk(void)
+{
+	int hclk;
+
+	/*
+	 * HCLK tick rate is configured by DEV_D[7:5] pins.
+	 */
+	switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) {
+	case 0:
+		hclk = 166666667;
+		break;
+	case 1:
+		hclk = 200000000;
+		break;
+	case 2:
+		hclk = 266666667;
+		break;
+	case 3:
+		hclk = 333333333;
+		break;
+	case 4:
+		hclk = 400000000;
+		break;
+	default:
+		panic("unknown HCLK PLL setting: %.8x\n",
+			readl(SAMPLE_AT_RESET_LOW));
+	}
+
+	return hclk;
+}
+
+static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk)
+{
+	u32 cfg;
+
+	/*
+	 * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1
+	 * PCLK/L2CLK by bits [19:14].
+	 */
+	if (core_index == 0) {
+		cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f;
+	} else {
+		cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f;
+	}
+
+	/*
+	 * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK
+	 * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6).
+	 */
+	*pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1;
+
+	/*
+	 * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK
+	 * ratio (1, 2, 3).
+	 */
+	*l2clk = *pclk / (((cfg >> 4) & 3) + 1);
+}
+
+static int get_tclk(void)
+{
+	int tclk;
+
+	/*
+	 * TCLK tick rate is configured by DEV_A[2:0] strap pins.
+	 */
+	switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
+	case 1:
+		tclk = 166666667;
+		break;
+	case 3:
+		tclk = 200000000;
+		break;
+	default:
+		panic("unknown TCLK PLL setting: %.8x\n",
+			readl(SAMPLE_AT_RESET_HIGH));
+	}
+
+	return tclk;
+}
+
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc mv78xx0_io_desc[] __initdata = {
+	{
+		.virtual	= MV78XX0_CORE_REGS_VIRT_BASE,
+		.pfn		= 0,
+		.length		= MV78XX0_CORE_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MV78XX0_PCIE_IO_VIRT_BASE(0),
+		.pfn		= __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
+		.length		= MV78XX0_PCIE_IO_SIZE * 8,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MV78XX0_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
+		.length		= MV78XX0_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init mv78xx0_map_io(void)
+{
+	unsigned long phys;
+
+	/*
+	 * Map the right set of per-core registers depending on
+	 * which core we are running on.
+	 */
+	if (mv78xx0_core_index() == 0) {
+		phys = MV78XX0_CORE0_REGS_PHYS_BASE;
+	} else {
+		phys = MV78XX0_CORE1_REGS_PHYS_BASE;
+	}
+	mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys);
+
+	iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc));
+}
+
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data mv78xx0_ehci_data = {
+	.dram		= &mv78xx0_mbus_dram_info,
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource mv78xx0_ehci0_resources[] = {
+	{
+		.start	= USB0_PHYS_BASE,
+		.end	= USB0_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_MV78XX0_USB_0,
+		.end	= IRQ_MV78XX0_USB_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_ehci0 = {
+	.name		= "orion-ehci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &mv78xx0_ehci_data,
+	},
+	.resource	= mv78xx0_ehci0_resources,
+	.num_resources	= ARRAY_SIZE(mv78xx0_ehci0_resources),
+};
+
+void __init mv78xx0_ehci0_init(void)
+{
+	platform_device_register(&mv78xx0_ehci0);
+}
+
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource mv78xx0_ehci1_resources[] = {
+	{
+		.start	= USB1_PHYS_BASE,
+		.end	= USB1_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_MV78XX0_USB_1,
+		.end	= IRQ_MV78XX0_USB_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_ehci1 = {
+	.name		= "orion-ehci",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &mv78xx0_ehci_data,
+	},
+	.resource	= mv78xx0_ehci1_resources,
+	.num_resources	= ARRAY_SIZE(mv78xx0_ehci1_resources),
+};
+
+void __init mv78xx0_ehci1_init(void)
+{
+	platform_device_register(&mv78xx0_ehci1);
+}
+
+
+/*****************************************************************************
+ * EHCI2
+ ****************************************************************************/
+static struct resource mv78xx0_ehci2_resources[] = {
+	{
+		.start	= USB2_PHYS_BASE,
+		.end	= USB2_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_MV78XX0_USB_2,
+		.end	= IRQ_MV78XX0_USB_2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_ehci2 = {
+	.name		= "orion-ehci",
+	.id		= 2,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &mv78xx0_ehci_data,
+	},
+	.resource	= mv78xx0_ehci2_resources,
+	.num_resources	= ARRAY_SIZE(mv78xx0_ehci2_resources),
+};
+
+void __init mv78xx0_ehci2_init(void)
+{
+	platform_device_register(&mv78xx0_ehci2);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge00_shared_data = {
+	.t_clk		= 0,
+	.dram		= &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge00_shared_resources[] = {
+	{
+		.name	= "ge00 base",
+		.start	= GE00_PHYS_BASE + 0x2000,
+		.end	= GE00_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mv78xx0_ge00_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &mv78xx0_ge00_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= mv78xx0_ge00_shared_resources,
+};
+
+static struct resource mv78xx0_ge00_resources[] = {
+	{
+		.name	= "ge00 irq",
+		.start	= IRQ_MV78XX0_GE00_SUM,
+		.end	= IRQ_MV78XX0_GE00_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_ge00 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= mv78xx0_ge00_resources,
+};
+
+void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &mv78xx0_ge00_shared;
+	mv78xx0_ge00.dev.platform_data = eth_data;
+
+	platform_device_register(&mv78xx0_ge00_shared);
+	platform_device_register(&mv78xx0_ge00);
+}
+
+
+/*****************************************************************************
+ * GE01
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge01_shared_data = {
+	.t_clk		= 0,
+	.dram		= &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge01_shared_resources[] = {
+	{
+		.name	= "ge01 base",
+		.start	= GE01_PHYS_BASE + 0x2000,
+		.end	= GE01_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mv78xx0_ge01_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &mv78xx0_ge01_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= mv78xx0_ge01_shared_resources,
+};
+
+static struct resource mv78xx0_ge01_resources[] = {
+	{
+		.name	= "ge01 irq",
+		.start	= IRQ_MV78XX0_GE01_SUM,
+		.end	= IRQ_MV78XX0_GE01_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_ge01 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= mv78xx0_ge01_resources,
+};
+
+void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &mv78xx0_ge01_shared;
+	eth_data->shared_smi = &mv78xx0_ge00_shared;
+	mv78xx0_ge01.dev.platform_data = eth_data;
+
+	platform_device_register(&mv78xx0_ge01_shared);
+	platform_device_register(&mv78xx0_ge01);
+}
+
+
+/*****************************************************************************
+ * GE10
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge10_shared_data = {
+	.t_clk		= 0,
+	.dram		= &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge10_shared_resources[] = {
+	{
+		.name	= "ge10 base",
+		.start	= GE10_PHYS_BASE + 0x2000,
+		.end	= GE10_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mv78xx0_ge10_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &mv78xx0_ge10_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= mv78xx0_ge10_shared_resources,
+};
+
+static struct resource mv78xx0_ge10_resources[] = {
+	{
+		.name	= "ge10 irq",
+		.start	= IRQ_MV78XX0_GE10_SUM,
+		.end	= IRQ_MV78XX0_GE10_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_ge10 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 2,
+	.num_resources	= 1,
+	.resource	= mv78xx0_ge10_resources,
+};
+
+void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &mv78xx0_ge10_shared;
+	eth_data->shared_smi = &mv78xx0_ge00_shared;
+	mv78xx0_ge10.dev.platform_data = eth_data;
+
+	platform_device_register(&mv78xx0_ge10_shared);
+	platform_device_register(&mv78xx0_ge10);
+}
+
+
+/*****************************************************************************
+ * GE11
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge11_shared_data = {
+	.t_clk		= 0,
+	.dram		= &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge11_shared_resources[] = {
+	{
+		.name	= "ge11 base",
+		.start	= GE11_PHYS_BASE + 0x2000,
+		.end	= GE11_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mv78xx0_ge11_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &mv78xx0_ge11_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= mv78xx0_ge11_shared_resources,
+};
+
+static struct resource mv78xx0_ge11_resources[] = {
+	{
+		.name	= "ge11 irq",
+		.start	= IRQ_MV78XX0_GE11_SUM,
+		.end	= IRQ_MV78XX0_GE11_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_ge11 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 3,
+	.num_resources	= 1,
+	.resource	= mv78xx0_ge11_resources,
+};
+
+void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &mv78xx0_ge11_shared;
+	eth_data->shared_smi = &mv78xx0_ge00_shared;
+	mv78xx0_ge11.dev.platform_data = eth_data;
+
+	platform_device_register(&mv78xx0_ge11_shared);
+	platform_device_register(&mv78xx0_ge11);
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource mv78xx0_sata_resources[] = {
+	{
+		.name	= "sata base",
+		.start	= SATA_PHYS_BASE,
+		.end	= SATA_PHYS_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "sata irq",
+		.start	= IRQ_MV78XX0_SATA,
+		.end	= IRQ_MV78XX0_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_sata = {
+	.name		= "sata_mv",
+	.id		= 0,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(mv78xx0_sata_resources),
+	.resource	= mv78xx0_sata_resources,
+};
+
+void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	sata_data->dram = &mv78xx0_mbus_dram_info;
+	mv78xx0_sata.dev.platform_data = sata_data;
+	platform_device_register(&mv78xx0_sata);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart0_data[] = {
+	{
+		.mapbase	= UART0_PHYS_BASE,
+		.membase	= (char *)UART0_VIRT_BASE,
+		.irq		= IRQ_MV78XX0_UART_0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource mv78xx0_uart0_resources[] = {
+	{
+		.start		= UART0_PHYS_BASE,
+		.end		= UART0_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_MV78XX0_UART_0,
+		.end		= IRQ_MV78XX0_UART_0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_uart0 = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= mv78xx0_uart0_data,
+	},
+	.resource		= mv78xx0_uart0_resources,
+	.num_resources		= ARRAY_SIZE(mv78xx0_uart0_resources),
+};
+
+void __init mv78xx0_uart0_init(void)
+{
+	platform_device_register(&mv78xx0_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart1_data[] = {
+	{
+		.mapbase	= UART1_PHYS_BASE,
+		.membase	= (char *)UART1_VIRT_BASE,
+		.irq		= IRQ_MV78XX0_UART_1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource mv78xx0_uart1_resources[] = {
+	{
+		.start		= UART1_PHYS_BASE,
+		.end		= UART1_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_MV78XX0_UART_1,
+		.end		= IRQ_MV78XX0_UART_1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_uart1 = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= mv78xx0_uart1_data,
+	},
+	.resource		= mv78xx0_uart1_resources,
+	.num_resources		= ARRAY_SIZE(mv78xx0_uart1_resources),
+};
+
+void __init mv78xx0_uart1_init(void)
+{
+	platform_device_register(&mv78xx0_uart1);
+}
+
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart2_data[] = {
+	{
+		.mapbase	= UART2_PHYS_BASE,
+		.membase	= (char *)UART2_VIRT_BASE,
+		.irq		= IRQ_MV78XX0_UART_2,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource mv78xx0_uart2_resources[] = {
+	{
+		.start		= UART2_PHYS_BASE,
+		.end		= UART2_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_MV78XX0_UART_2,
+		.end		= IRQ_MV78XX0_UART_2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_uart2 = {
+	.name			= "serial8250",
+	.id			= 2,
+	.dev			= {
+		.platform_data	= mv78xx0_uart2_data,
+	},
+	.resource		= mv78xx0_uart2_resources,
+	.num_resources		= ARRAY_SIZE(mv78xx0_uart2_resources),
+};
+
+void __init mv78xx0_uart2_init(void)
+{
+	platform_device_register(&mv78xx0_uart2);
+}
+
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart3_data[] = {
+	{
+		.mapbase	= UART3_PHYS_BASE,
+		.membase	= (char *)UART3_VIRT_BASE,
+		.irq		= IRQ_MV78XX0_UART_3,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource mv78xx0_uart3_resources[] = {
+	{
+		.start		= UART3_PHYS_BASE,
+		.end		= UART3_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_MV78XX0_UART_3,
+		.end		= IRQ_MV78XX0_UART_3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mv78xx0_uart3 = {
+	.name			= "serial8250",
+	.id			= 3,
+	.dev			= {
+		.platform_data	= mv78xx0_uart3_data,
+	},
+	.resource		= mv78xx0_uart3_resources,
+	.num_resources		= ARRAY_SIZE(mv78xx0_uart3_resources),
+};
+
+void __init mv78xx0_uart3_init(void)
+{
+	platform_device_register(&mv78xx0_uart3);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void mv78xx0_timer_init(void)
+{
+	orion_time_init(IRQ_MV78XX0_TIMER_1, get_tclk());
+}
+
+struct sys_timer mv78xx0_timer = {
+	.init = mv78xx0_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+static int __init is_l2_writethrough(void)
+{
+	return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
+}
+
+void __init mv78xx0_init(void)
+{
+	int core_index;
+	int hclk;
+	int pclk;
+	int l2clk;
+	int tclk;
+
+	core_index = mv78xx0_core_index();
+	hclk = get_hclk();
+	get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
+	tclk = get_tclk();
+
+	printk(KERN_INFO "MV78xx0 core #%d, ", core_index);
+	printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
+	printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
+	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
+	printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+	mv78xx0_setup_cpu_mbus();
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_l2_init(is_l2_writethrough());
+#endif
+
+	mv78xx0_ge00_shared_data.t_clk = tclk;
+	mv78xx0_ge01_shared_data.t_clk = tclk;
+	mv78xx0_ge10_shared_data.t_clk = tclk;
+	mv78xx0_ge11_shared_data.t_clk = tclk;
+	mv78xx0_uart0_data[0].uartclk = tclk;
+	mv78xx0_uart1_data[0].uartclk = tclk;
+	mv78xx0_uart2_data[0].uartclk = tclk;
+	mv78xx0_uart3_data[0].uartclk = tclk;
+}
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
new file mode 100644
index 000000000000..78af5de319dd
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-mv78xx0/common.h
+ *
+ * Core functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MV78XX0_COMMON_H
+#define __ARCH_MV78XX0_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+/*
+ * Basic MV78xx0 init functions used early by machine-setup.
+ */
+int mv78xx0_core_index(void);
+void mv78xx0_map_io(void);
+void mv78xx0_init(void);
+void mv78xx0_init_irq(void);
+
+extern struct mbus_dram_target_info mv78xx0_mbus_dram_info;
+void mv78xx0_setup_cpu_mbus(void);
+void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
+			       int maj, int min);
+void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
+				int maj, int min);
+
+void mv78xx0_ehci0_init(void);
+void mv78xx0_ehci1_init(void);
+void mv78xx0_ehci2_init(void);
+void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_pcie_init(int init_port0, int init_port1);
+void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data);
+void mv78xx0_uart0_init(void);
+void mv78xx0_uart1_init(void);
+void mv78xx0_uart2_init(void);
+void mv78xx0_uart3_init(void);
+
+extern struct sys_timer mv78xx0_timer;
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
new file mode 100644
index 000000000000..0c93d19193df
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+ *
+ * Marvell DB-78x00-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/arch/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+	.phy_addr	= 8,
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+	.phy_addr	= 9,
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge10_data = {
+	.phy_addr	= -1,
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge11_data = {
+	.phy_addr	= -1,
+};
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+	.n_ports	= 2,
+};
+
+static void __init db78x00_init(void)
+{
+	/*
+	 * Basic MV78xx0 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	if (mv78xx0_core_index() == 0) {
+		mv78xx0_ehci0_init();
+		mv78xx0_ehci1_init();
+		mv78xx0_ehci2_init();
+		mv78xx0_ge00_init(&db78x00_ge00_data);
+		mv78xx0_ge01_init(&db78x00_ge01_data);
+		mv78xx0_ge10_init(&db78x00_ge10_data);
+		mv78xx0_ge11_init(&db78x00_ge11_data);
+		mv78xx0_sata_init(&db78x00_sata_data);
+		mv78xx0_uart0_init();
+		mv78xx0_uart2_init();
+	} else {
+		mv78xx0_uart1_init();
+		mv78xx0_uart3_init();
+	}
+}
+
+static int __init db78x00_pci_init(void)
+{
+	if (machine_is_db78x00_bp()) {
+		/*
+		 * Assign the x16 PCIe slot on the board to CPU core
+		 * #0, and let CPU core #1 have the four x1 slots.
+		 */
+		if (mv78xx0_core_index() == 0)
+			mv78xx0_pcie_init(0, 1);
+		else
+			mv78xx0_pcie_init(1, 0);
+	}
+
+	return 0;
+}
+subsys_initcall(db78x00_pci_init);
+
+MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= MV78XX0_REGS_PHYS_BASE,
+	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= db78x00_init,
+	.map_io		= mv78xx0_map_io,
+	.init_irq	= mv78xx0_init_irq,
+	.timer		= &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
new file mode 100644
index 000000000000..60f4ee4d4532
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-mv78xx0/irq.c
+ *
+ * MV78xx0 IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/arch/mv78xx0.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init mv78xx0_init_irq(void)
+{
+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+}
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
new file mode 100644
index 000000000000..b78e1443159f
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -0,0 +1,312 @@
+/*
+ * arch/arm/mach-mv78xx0/pcie.c
+ *
+ * PCIe functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+#include "common.h"
+
+struct pcie_port {
+	u8			maj;
+	u8			min;
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	char			io_space_name[16];
+	char			mem_space_name[16];
+	struct resource		res[2];
+};
+
+static struct pcie_port pcie_port[8];
+static int num_pcie_ports;
+static struct resource pcie_io_space;
+static struct resource pcie_mem_space;
+
+
+static void __init mv78xx0_pcie_preinit(void)
+{
+	int i;
+	u32 size_each;
+	u32 start;
+	int win;
+
+	pcie_io_space.name = "PCIe I/O Space";
+	pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
+	pcie_io_space.end =
+		MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
+	pcie_io_space.flags = IORESOURCE_IO;
+	if (request_resource(&iomem_resource, &pcie_io_space))
+		panic("can't allocate PCIe I/O space");
+
+	pcie_mem_space.name = "PCIe MEM Space";
+	pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
+	pcie_mem_space.end =
+		MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
+	pcie_mem_space.flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pcie_mem_space))
+		panic("can't allocate PCIe MEM space");
+
+	for (i = 0; i < num_pcie_ports; i++) {
+		struct pcie_port *pp = pcie_port + i;
+
+		snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+			"PCIe %d.%d I/O", pp->maj, pp->min);
+		pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+		pp->res[0].name = pp->io_space_name;
+		pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
+		pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
+		pp->res[0].flags = IORESOURCE_IO;
+
+		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+			"PCIe %d.%d MEM", pp->maj, pp->min);
+		pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+		pp->res[1].name = pp->mem_space_name;
+		pp->res[1].flags = IORESOURCE_MEM;
+	}
+
+	switch (num_pcie_ports) {
+	case 0:
+		size_each = 0;
+		break;
+
+	case 1:
+		size_each = 0x30000000;
+		break;
+
+	case 2 ... 3:
+		size_each = 0x10000000;
+		break;
+
+	case 4 ... 6:
+		size_each = 0x08000000;
+		break;
+
+	case 7:
+		size_each = 0x04000000;
+		break;
+
+	default:
+		panic("invalid number of PCIe ports");
+	}
+
+	start = MV78XX0_PCIE_MEM_PHYS_BASE;
+	for (i = 0; i < num_pcie_ports; i++) {
+		struct pcie_port *pp = pcie_port + i;
+
+		pp->res[1].start = start;
+		pp->res[1].end = start + size_each - 1;
+		start += size_each;
+	}
+
+	for (i = 0; i < num_pcie_ports; i++) {
+		struct pcie_port *pp = pcie_port + i;
+
+		if (request_resource(&pcie_io_space, &pp->res[0]))
+			panic("can't allocate PCIe I/O sub-space");
+
+		if (request_resource(&pcie_mem_space, &pp->res[1]))
+			panic("can't allocate PCIe MEM sub-space");
+	}
+
+	win = 0;
+	for (i = 0; i < num_pcie_ports; i++) {
+		struct pcie_port *pp = pcie_port + i;
+
+		mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
+			pp->res[0].end - pp->res[0].start + 1,
+			pp->maj, pp->min);
+
+		mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
+			pp->res[1].end - pp->res[1].start + 1,
+			pp->maj, pp->min);
+	}
+}
+
+static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	pp = &pcie_port[nr];
+	pp->root_bus_nr = sys->busnr;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+	orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info);
+
+	sys->resource[0] = &pp->res[0];
+	sys->resource[1] = &pp->res[1];
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+	int i;
+
+	for (i = num_pcie_ports - 1; i >= 0; i--) {
+		int rbus = pcie_port[i].root_bus_nr;
+		if (rbus != -1 && rbus <= bus)
+			break;
+	}
+
+	return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access nonexisting devices
+	 * on the local bus.
+	 */
+	if (bus == pp->root_bus_nr && dev > 1)
+		return 0;
+
+	return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex.
+	 */
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct pci_bus *bus;
+
+	if (nr < num_pcie_ports) {
+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
+
+static int __init mv78xx0_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+	return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min;
+}
+
+static struct hw_pci mv78xx0_pci __initdata = {
+	.nr_controllers	= 8,
+	.preinit	= mv78xx0_pcie_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= mv78xx0_pcie_setup,
+	.scan		= mv78xx0_pcie_scan_bus,
+	.map_irq	= mv78xx0_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int maj, int min, unsigned long base)
+{
+	printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
+
+	if (orion_pcie_link_up((void __iomem *)base)) {
+		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+		printk("link up\n");
+
+		pp->maj = maj;
+		pp->min = min;
+		pp->root_bus_nr = -1;
+		pp->base = (void __iomem *)base;
+		spin_lock_init(&pp->conf_lock);
+		memset(pp->res, 0, sizeof(pp->res));
+	} else {
+		printk("link down, ignoring\n");
+	}
+}
+
+void __init mv78xx0_pcie_init(int init_port0, int init_port1)
+{
+	if (init_port0) {
+		add_pcie_port(0, 0, PCIE00_VIRT_BASE);
+		if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
+			add_pcie_port(0, 1, PCIE01_VIRT_BASE);
+			add_pcie_port(0, 2, PCIE02_VIRT_BASE);
+			add_pcie_port(0, 3, PCIE03_VIRT_BASE);
+		}
+	}
+
+	if (init_port1) {
+		add_pcie_port(1, 0, PCIE10_VIRT_BASE);
+		if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) {
+			add_pcie_port(1, 1, PCIE11_VIRT_BASE);
+			add_pcie_port(1, 2, PCIE12_VIRT_BASE);
+			add_pcie_port(1, 3, PCIE13_VIRT_BASE);
+		}
+	}
+
+	pci_common_init(&mv78xx0_pci);
+}
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
new file mode 100644
index 000000000000..1eaa97cb716d
--- /dev/null
+++ b/arch/arm/mach-mx2/Kconfig
@@ -0,0 +1,39 @@
+comment "MX2 family CPU support"
+	depends on ARCH_MX2
+
+config MACH_MX27
+	bool "i.MX27 support"
+	depends on ARCH_MX2
+	help
+	  This enables support for Freescale's MX2 based i.MX27 processor.
+
+comment "MX2 Platforms"
+	depends on ARCH_MX2
+
+config MACH_MX27ADS
+	bool "MX27ADS platform"
+	depends on MACH_MX27
+	help
+	  Include support for MX27ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM038
+	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+	depends on MACH_MX27
+	help
+	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_PCM038
+	default MACH_PCM970_BASEBOARD
+
+config MACH_PCM970_BASEBOARD
+	prompt "PHYTEC PCM970 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Phytec's
+	  PCM970 evaluation board.
+
+endchoice
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
new file mode 100644
index 000000000000..382d86080e86
--- /dev/null
+++ b/arch/arm/mach-mx2/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y	:=  system.o generic.o devices.o serial.o
+
+obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
+obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+
+obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot
new file mode 100644
index 000000000000..696831dcd485
--- /dev/null
+++ b/arch/arm/mach-mx2/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0xA0008000
+params_phys-y	:= 0xA0000100
+initrd_phys-y	:= 0xA0800000
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
new file mode 100644
index 000000000000..0a29ef29c73a
--- /dev/null
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -0,0 +1,1626 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/common.h>
+#include <asm/div64.h>
+#include <asm/mach-types.h>
+
+#include "crm_regs.h"
+
+static struct clk ckil_clk;
+static struct clk mpll_clk;
+static struct clk mpll_main_clk[];
+static struct clk spll_clk;
+
+static int _clk_enable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_spll_enable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg |= CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+
+	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
+		;
+
+	return 0;
+}
+
+static void _clk_spll_disable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+}
+
+static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_PCCR0);
+	reg |= mask0;
+	__raw_writel(reg, CCM_PCCR0);
+
+	reg = __raw_readl(CCM_PCCR1);
+	reg |= mask1;
+	__raw_writel(reg, CCM_PCCR1);
+
+}
+
+static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_PCCR0);
+	reg &= ~mask0;
+	__raw_writel(reg, CCM_PCCR0);
+
+	reg = __raw_readl(CCM_PCCR1);
+	reg &= ~mask1;
+	__raw_writel(reg, CCM_PCCR1);
+}
+
+static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_PCCR1);
+	reg |= mask1;
+	__raw_writel(reg, CCM_PCCR1);
+
+	reg = __raw_readl(CCM_PCCR0);
+	reg |= mask0;
+	__raw_writel(reg, CCM_PCCR0);
+}
+
+static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_PCCR1);
+	reg &= ~mask1;
+	__raw_writel(reg, CCM_PCCR1);
+
+	reg = __raw_readl(CCM_PCCR0);
+	reg &= ~mask0;
+	__raw_writel(reg, CCM_PCCR0);
+}
+
+static int _clk_dma_enable(struct clk *clk)
+{
+	_clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
+
+	return 0;
+}
+
+static void _clk_dma_disable(struct clk *clk)
+{
+	_clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
+}
+
+static int _clk_rtic_enable(struct clk *clk)
+{
+	_clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
+
+	return 0;
+}
+
+static void _clk_rtic_disable(struct clk *clk)
+{
+	_clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
+}
+
+static int _clk_emma_enable(struct clk *clk)
+{
+	_clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
+
+	return 0;
+}
+
+static void _clk_emma_disable(struct clk *clk)
+{
+	_clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
+}
+
+static int _clk_slcdc_enable(struct clk *clk)
+{
+	_clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
+
+	return 0;
+}
+
+static void _clk_slcdc_disable(struct clk *clk)
+{
+	_clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
+}
+
+static int _clk_fec_enable(struct clk *clk)
+{
+	_clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
+
+	return 0;
+}
+
+static void _clk_fec_disable(struct clk *clk)
+{
+	_clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
+}
+
+static int _clk_vpu_enable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_PCCR1);
+	reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK;
+	__raw_writel(reg, CCM_PCCR1);
+
+	return 0;
+}
+
+static void _clk_vpu_disable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_PCCR1);
+	reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK);
+	__raw_writel(reg, CCM_PCCR1);
+}
+
+static int _clk_sahara2_enable(struct clk *clk)
+{
+	_clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
+
+	return 0;
+}
+
+static void _clk_sahara2_disable(struct clk *clk)
+{
+	_clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
+}
+
+static int _clk_mstick1_enable(struct clk *clk)
+{
+	_clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
+
+	return 0;
+}
+
+static void _clk_mstick1_disable(struct clk *clk)
+{
+	_clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
+}
+
+#define CSCR() (__raw_readl(CCM_CSCR))
+#define PCDR0() (__raw_readl(CCM_PCDR0))
+#define PCDR1() (__raw_readl(CCM_PCDR1))
+
+static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent)
+{
+	int cscr = CSCR();
+
+	if (clk->parent == parent)
+		return 0;
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		if (parent == &mpll_main_clk[0]) {
+			cscr |= CCM_CSCR_ARM_SRC;
+		} else {
+			if (parent == &mpll_main_clk[1])
+				cscr &= ~CCM_CSCR_ARM_SRC;
+			else
+				return -EINVAL;
+		}
+		__raw_writel(cscr, CCM_CSCR);
+	} else
+		return -ENODEV;
+
+	clk->parent = parent;
+	return 0;
+}
+
+static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
+{
+	int div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 4)
+		div = 4;
+
+	return parent_rate / div;
+}
+
+static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	uint32_t reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 4 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_CSCR);
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		reg &= ~CCM_CSCR_ARM_MASK;
+		reg |= div << CCM_CSCR_ARM_OFFSET;
+		reg &= ~0x06;
+		__raw_writel(reg | 0x80000000, CCM_CSCR);
+	} else {
+		printk(KERN_ERR "Cant set CPU frequency!\n");
+	}
+
+	return 0;
+}
+
+static unsigned long _clk_perclkx_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 64)
+		div = 64;
+
+	return parent_rate / div;
+}
+
+static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return -EINVAL;
+
+	div = parent_rate / rate;
+	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg =
+	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
+				       (clk->id << 3));
+	reg |= div << (clk->id << 3);
+	__raw_writel(reg, CCM_PCDR1);
+
+	return 0;
+}
+
+static unsigned long _clk_usb_recalc(struct clk *clk)
+{
+	unsigned long usb_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+
+	return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long _clk_ssi1_recalc(struct clk *clk)
+{
+	unsigned long ssi1_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >>
+					CCM_PCDR0_SSI1BAUDDIV_OFFSET;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		ssi1_pdf += 4;
+	else
+		ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf;
+
+	return 2UL * parent_rate / ssi1_pdf;
+}
+
+static unsigned long _clk_ssi2_recalc(struct clk *clk)
+{
+	unsigned long ssi2_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
+	    CCM_PCDR0_SSI2BAUDDIV_OFFSET;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		ssi2_pdf += 4;
+	else
+		ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf;
+
+	return 2UL * parent_rate / ssi2_pdf;
+}
+
+static unsigned long _clk_nfc_recalc(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		nfc_pdf =
+		    (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >>
+		    CCM_PCDR0_NFCDIV2_OFFSET;
+	} else {
+		nfc_pdf =
+		    (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >>
+		    CCM_PCDR0_NFCDIV_OFFSET;
+	}
+
+	return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_vpu_recalc(struct clk *clk)
+{
+	unsigned long vpu_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		vpu_pdf =
+		    (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >>
+		    CCM_PCDR0_VPUDIV2_OFFSET;
+		vpu_pdf += 4;
+	} else {
+		vpu_pdf =
+		    (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >>
+		    CCM_PCDR0_VPUDIV_OFFSET;
+		vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
+	}
+	return 2UL * parent_rate / vpu_pdf;
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+/* in Hz */
+static unsigned long external_high_reference = 26000000;
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz. Could be changed at runtime
+ * with a call to change_external_high_reference()
+ */
+static struct clk ckih_clk = {
+	.name = "ckih",
+	.get_rate = get_high_reference_clock_rate,
+};
+
+/* in Hz */
+static unsigned long external_low_reference = 32768;
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz Could be changed at runtime
+ * with a call to change_external_low_reference()
+ */
+static struct clk ckil_clk = {
+	.name = "ckil",
+	.get_rate = get_low_reference_clock_rate,
+};
+
+static unsigned long get_mpll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_MPCTL0);
+	pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk mpll_clk = {
+	.name = "mpll",
+	.parent = &ckih_clk,
+	.get_rate = get_mpll_clk,
+};
+
+static unsigned long _clk_mpll_main_get_rate(struct clk *clk)
+{
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	/* i.MX27 TO2:
+	 * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2
+	 * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3
+	 */
+
+	if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
+		return 2UL * parent_rate / 3UL;
+
+	return parent_rate;
+}
+
+static struct clk mpll_main_clk[] = {
+	{
+		/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
+		 * It provide the clock source whose rate is same as MPLL
+		 */
+		.name = "mpll_main",
+		.id = 0,
+		.parent = &mpll_clk,
+		.get_rate = _clk_mpll_main_get_rate
+	}, {
+		/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
+		 * It provide the clock source whose rate is same MPLL * 2/3
+		 */
+		.name = "mpll_main",
+		.id = 1,
+		.parent = &mpll_clk,
+		.get_rate = _clk_mpll_main_get_rate
+	}
+};
+
+static unsigned long get_spll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_SPCTL0);
+	/*TODO: This is TO2 Bug */
+	if (mx27_revision() >= CHIP_REV_2_0)
+		__raw_writel(reg, CCM_SPCTL0);
+
+	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk spll_clk = {
+	.name = "spll",
+	.parent = &ckih_clk,
+	.get_rate = get_spll_clk,
+	.enable = _clk_spll_enable,
+	.disable = _clk_spll_disable,
+};
+
+static unsigned long get_cpu_clk(struct clk *clk)
+{
+	u32 div;
+	unsigned long rate;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET;
+	else
+		div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (div + 1);
+}
+
+static struct clk cpu_clk = {
+	.name = "cpu_clk",
+	.parent = &mpll_main_clk[1],
+	.set_parent = _clk_cpu_set_parent,
+	.round_rate = _clk_cpu_round_rate,
+	.get_rate = get_cpu_clk,
+	.set_rate = _clk_cpu_set_rate,
+};
+
+static unsigned long get_ahb_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long bclk_pdf;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK)
+					>> CCM_CSCR_AHB_OFFSET;
+	else
+		bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
+					>> CCM_CSCR_BCLK_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (bclk_pdf + 1);
+}
+
+static struct clk ahb_clk = {
+	.name = "ahb_clk",
+	.parent = &mpll_main_clk[1],
+	.get_rate = get_ahb_clk,
+};
+
+static unsigned long get_ipg_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long ipg_pdf;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		return clk_get_rate(clk->parent);
+	else
+		ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (ipg_pdf + 1);
+}
+
+static struct clk ipg_clk = {
+	.name = "ipg_clk",
+	.parent = &ahb_clk,
+	.get_rate = get_ipg_clk,
+};
+
+static unsigned long _clk_perclkx_recalc(struct clk *clk)
+{
+	unsigned long perclk_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return 0;
+
+	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+
+	return parent_rate / (perclk_pdf + 1);
+}
+
+static struct clk per_clk[] = {
+	{
+		.name = "per_clk",
+		.id = 0,
+		.parent = &mpll_main_clk[1],
+		.get_rate = _clk_perclkx_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_PERCLK1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.name = "per_clk",
+		.id = 1,
+		.parent = &mpll_main_clk[1],
+		.get_rate = _clk_perclkx_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_PERCLK2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.name = "per_clk",
+		.id = 2,
+		.parent = &mpll_main_clk[1],
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_PERCLK3_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.name = "per_clk",
+		.id = 3,
+		.parent = &mpll_main_clk[1],
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_PERCLK4_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+struct clk uart1_clk[] = {
+	{
+		.name = "uart_clk",
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &uart1_clk[1],
+	}, {
+		.name = "uart_ipg_clk",
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_UART1_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+struct clk uart2_clk[] = {
+	{
+		.name = "uart_clk",
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &uart2_clk[1],
+	}, {
+		.name = "uart_ipg_clk",
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_UART2_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+struct clk uart3_clk[] = {
+	{
+		.name = "uart_clk",
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &uart3_clk[1],
+	}, {
+		.name = "uart_ipg_clk",
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_UART3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+struct clk uart4_clk[] = {
+	{
+		.name = "uart_clk",
+		.id = 3,
+		.parent = &per_clk[0],
+		.secondary = &uart4_clk[1],
+	}, {
+		.name = "uart_ipg_clk",
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_UART4_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+struct clk uart5_clk[] = {
+	{
+		.name = "uart_clk",
+		.id = 4,
+		.parent = &per_clk[0],
+		.secondary = &uart5_clk[1],
+	}, {
+		.name = "uart_ipg_clk",
+		.id = 4,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_UART5_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+struct clk uart6_clk[] = {
+	{
+		.name = "uart_clk",
+		.id = 5,
+		.parent = &per_clk[0],
+		.secondary = &uart6_clk[1],
+	}, {
+		.name = "uart_ipg_clk",
+		.id = 5,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_UART6_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt1_clk[] = {
+	{
+		.name = "gpt_clk",
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &gpt1_clk[1],
+	}, {
+		.name = "gpt_ipg_clk",
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_GPT1_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt2_clk[] = {
+	{
+		.name = "gpt_clk",
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &gpt2_clk[1],
+	}, {
+		.name = "gpt_ipg_clk",
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_GPT2_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt3_clk[] = {
+	{
+		.name = "gpt_clk",
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &gpt3_clk[1],
+	}, {
+		.name = "gpt_ipg_clk",
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_GPT3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt4_clk[] = {
+	{
+		.name = "gpt_clk",
+		.id = 3,
+		.parent = &per_clk[0],
+		.secondary = &gpt4_clk[1],
+	}, {
+		.name = "gpt_ipg_clk",
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_GPT4_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt5_clk[] = {
+	{
+		.name = "gpt_clk",
+		.id = 4,
+		.parent = &per_clk[0],
+		.secondary = &gpt5_clk[1],
+	}, {
+		.name = "gpt_ipg_clk",
+		.id = 4,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_GPT5_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt6_clk[] = {
+	{
+		.name = "gpt_clk",
+		.id = 5,
+		.parent = &per_clk[0],
+		.secondary = &gpt6_clk[1],
+	}, {
+		.name = "gpt_ipg_clk",
+		.id = 5,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_GPT6_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk pwm_clk[] = {
+	{
+		.name = "pwm_clk",
+		.parent = &per_clk[0],
+		.secondary = &pwm_clk[1],
+	}, {
+		.name = "pwm_clk",
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_PWM_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk sdhc1_clk[] = {
+	{
+		.name = "sdhc_clk",
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &sdhc1_clk[1],
+	}, {
+		.name = "sdhc_ipg_clk",
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_SDHC1_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk sdhc2_clk[] = {
+	{
+		.name = "sdhc_clk",
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &sdhc2_clk[1],
+	}, {
+		.name = "sdhc_ipg_clk",
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_SDHC2_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk sdhc3_clk[] = {
+	{
+		.name = "sdhc_clk",
+		.id = 2,
+		.parent = &per_clk[1],
+		.secondary = &sdhc3_clk[1],
+	}, {
+		.name = "sdhc_ipg_clk",
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_SDHC3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk cspi1_clk[] = {
+	{
+		.name = "cspi_clk",
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &cspi1_clk[1],
+	}, {
+		.name = "cspi_ipg_clk",
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_CSPI1_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk cspi2_clk[] = {
+	{
+		.name = "cspi_clk",
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &cspi2_clk[1],
+	}, {
+		.name = "cspi_ipg_clk",
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_CSPI2_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk cspi3_clk[] = {
+	{
+		.name = "cspi_clk",
+		.id = 2,
+		.parent = &per_clk[1],
+		.secondary = &cspi3_clk[1],
+	}, {
+		.name = "cspi_ipg_clk",
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_CSPI3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk lcdc_clk[] = {
+	{
+		.name = "lcdc_clk",
+		.parent = &per_clk[2],
+		.secondary = &lcdc_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.name = "lcdc_ipg_clk",
+		.parent = &ipg_clk,
+		.secondary = &lcdc_clk[2],
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_LCDC_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.name = "lcdc_ahb_clk",
+		.parent = &ahb_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk csi_clk[] = {
+	{
+		.name = "csi_perclk",
+		.parent = &per_clk[3],
+		.secondary = &csi_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.name = "csi_ahb_clk",
+		.parent = &ahb_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk usb_clk[] = {
+	{
+		.name = "usb_clk",
+		.parent = &spll_clk,
+		.get_rate = _clk_usb_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_USBOTG_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.name = "usb_ahb_clk",
+		.parent = &ahb_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk ssi1_clk[] = {
+	{
+		.name = "ssi_clk",
+		.id = 0,
+		.parent = &mpll_main_clk[1],
+		.secondary = &ssi1_clk[1],
+		.get_rate = _clk_ssi1_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.name = "ssi_ipg_clk",
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk ssi2_clk[] = {
+	{
+		.name = "ssi_clk",
+		.id = 1,
+		.parent = &mpll_main_clk[1],
+		.secondary = &ssi2_clk[1],
+		.get_rate = _clk_ssi2_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR1,
+		.enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.name = "ssi_ipg_clk",
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk nfc_clk = {
+	.name = "nfc_clk",
+	.parent = &cpu_clk,
+	.get_rate = _clk_nfc_recalc,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR1,
+	.enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk vpu_clk = {
+	.name = "vpu_clk",
+	.parent = &mpll_main_clk[1],
+	.get_rate = _clk_vpu_recalc,
+	.enable = _clk_vpu_enable,
+	.disable = _clk_vpu_disable,
+};
+
+static struct clk dma_clk = {
+	.name = "dma_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_dma_enable,
+	.disable = _clk_dma_disable,
+};
+
+static struct clk rtic_clk = {
+	.name = "rtic_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_rtic_enable,
+	.disable = _clk_rtic_disable,
+};
+
+static struct clk brom_clk = {
+	.name = "brom_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR1,
+	.enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk emma_clk = {
+	.name = "emma_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_emma_enable,
+	.disable = _clk_emma_disable,
+};
+
+static struct clk slcdc_clk = {
+	.name = "slcdc_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_slcdc_enable,
+	.disable = _clk_slcdc_disable,
+};
+
+static struct clk fec_clk = {
+	.name = "fec_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_fec_enable,
+	.disable = _clk_fec_disable,
+};
+
+static struct clk emi_clk = {
+	.name = "emi_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR1,
+	.enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk sahara2_clk = {
+	.name = "sahara_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_sahara2_enable,
+	.disable = _clk_sahara2_disable,
+};
+
+static struct clk ata_clk = {
+	.name = "ata_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR1,
+	.enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk mstick1_clk = {
+	.name = "mstick1_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_mstick1_enable,
+	.disable = _clk_mstick1_disable,
+};
+
+static struct clk wdog_clk = {
+	.name = "wdog_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR1,
+	.enable_shift = CCM_PCCR1_WDT_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR1,
+	.enable_shift = CCM_PCCR0_GPIO_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk i2c_clk[] = {
+	{
+		.name = "i2c_clk",
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_I2C1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.name = "i2c_clk",
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR0,
+		.enable_shift = CCM_PCCR0_I2C2_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk iim_clk = {
+	.name = "iim_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR0,
+	.enable_shift = CCM_PCCR0_IIM_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+	.name = "kpp_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR0,
+	.enable_shift = CCM_PCCR0_KPP_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk owire_clk = {
+	.name = "owire_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR0,
+	.enable_shift = CCM_PCCR0_OWIRE_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk rtc_clk = {
+	.name = "rtc_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR0,
+	.enable_shift = CCM_PCCR0_RTC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk scc_clk = {
+	.name = "scc_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR0,
+	.enable_shift = CCM_PCCR0_SCC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 8)
+		div = 8;
+
+	return parent_rate / div;
+}
+
+static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK;
+	reg |= div << CCM_PCDR0_CLKODIV_OFFSET;
+	__raw_writel(reg, CCM_PCDR0);
+
+	return 0;
+}
+
+static unsigned long _clk_clko_recalc(struct clk *clk)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >>
+		CCM_PCDR0_CLKODIV_OFFSET;
+	div++;
+
+	return parent_rate / div;
+}
+
+static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
+
+	if (parent == &ckil_clk)
+		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ckih_clk)
+		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == mpll_clk.parent)
+		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == spll_clk.parent)
+		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &mpll_clk)
+		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &spll_clk)
+		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &cpu_clk)
+		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ahb_clk)
+		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ipg_clk)
+		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[0])
+		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[1])
+		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[2])
+		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[3])
+		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi1_clk[0])
+		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi2_clk[0])
+		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &nfc_clk)
+		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &mstick1_clk)
+		reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &vpu_clk)
+		reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &usb_clk[0])
+		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, CCM_CCSR);
+
+	return 0;
+}
+
+static int _clk_clko_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN;
+	__raw_writel(reg, CCM_PCDR0);
+
+	return 0;
+}
+
+static void _clk_clko_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN;
+	__raw_writel(reg, CCM_PCDR0);
+}
+
+static struct clk clko_clk = {
+	.name = "clko_clk",
+	.get_rate = _clk_clko_recalc,
+	.set_rate = _clk_clko_set_rate,
+	.round_rate = _clk_clko_round_rate,
+	.set_parent = _clk_clko_set_parent,
+	.enable = _clk_clko_enable,
+	.disable = _clk_clko_disable,
+};
+
+static struct clk *mxc_clks[] = {
+	&ckih_clk,
+	&ckil_clk,
+	&mpll_clk,
+	&mpll_main_clk[0],
+	&mpll_main_clk[1],
+	&spll_clk,
+	&cpu_clk,
+	&ahb_clk,
+	&ipg_clk,
+	&per_clk[0],
+	&per_clk[1],
+	&per_clk[2],
+	&per_clk[3],
+	&clko_clk,
+	&uart1_clk[0],
+	&uart1_clk[1],
+	&uart2_clk[0],
+	&uart2_clk[1],
+	&uart3_clk[0],
+	&uart3_clk[1],
+	&uart4_clk[0],
+	&uart4_clk[1],
+	&uart5_clk[0],
+	&uart5_clk[1],
+	&uart6_clk[0],
+	&uart6_clk[1],
+	&gpt1_clk[0],
+	&gpt1_clk[1],
+	&gpt2_clk[0],
+	&gpt2_clk[1],
+	&gpt3_clk[0],
+	&gpt3_clk[1],
+	&gpt4_clk[0],
+	&gpt4_clk[1],
+	&gpt5_clk[0],
+	&gpt5_clk[1],
+	&gpt6_clk[0],
+	&gpt6_clk[1],
+	&pwm_clk[0],
+	&pwm_clk[1],
+	&sdhc1_clk[0],
+	&sdhc1_clk[1],
+	&sdhc2_clk[0],
+	&sdhc2_clk[1],
+	&sdhc3_clk[0],
+	&sdhc3_clk[1],
+	&cspi1_clk[0],
+	&cspi1_clk[1],
+	&cspi2_clk[0],
+	&cspi2_clk[1],
+	&cspi3_clk[0],
+	&cspi3_clk[1],
+	&lcdc_clk[0],
+	&lcdc_clk[1],
+	&lcdc_clk[2],
+	&csi_clk[0],
+	&csi_clk[1],
+	&usb_clk[0],
+	&usb_clk[1],
+	&ssi1_clk[0],
+	&ssi1_clk[1],
+	&ssi2_clk[0],
+	&ssi2_clk[1],
+	&nfc_clk,
+	&vpu_clk,
+	&dma_clk,
+	&rtic_clk,
+	&brom_clk,
+	&emma_clk,
+	&slcdc_clk,
+	&fec_clk,
+	&emi_clk,
+	&sahara2_clk,
+	&ata_clk,
+	&mstick1_clk,
+	&wdog_clk,
+	&gpio_clk,
+	&i2c_clk[0],
+	&i2c_clk[1],
+	&iim_clk,
+	&kpp_clk,
+	&owire_clk,
+	&rtc_clk,
+	&scc_clk,
+};
+
+void __init change_external_low_reference(unsigned long new_ref)
+{
+	external_low_reference = new_ref;
+}
+
+unsigned long __init clk_early_get_timer_rate(void)
+{
+	return clk_get_rate(&per_clk[0]);
+}
+
+static void __init probe_mxc_clocks(void)
+{
+	int i;
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		if (CSCR() & 0x8000)
+			cpu_clk.parent = &mpll_main_clk[0];
+
+		if (!(CSCR() & 0x00800000))
+			ssi2_clk[0].parent = &spll_clk;
+
+		if (!(CSCR() & 0x00400000))
+			ssi1_clk[0].parent = &spll_clk;
+
+		if (!(CSCR() & 0x00200000))
+			vpu_clk.parent = &spll_clk;
+	} else {
+		cpu_clk.parent = &mpll_clk;
+		cpu_clk.set_parent = NULL;
+		cpu_clk.round_rate = NULL;
+		cpu_clk.set_rate = NULL;
+		ahb_clk.parent = &mpll_clk;
+
+		for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++)
+			per_clk[i].parent = &mpll_clk;
+
+		ssi1_clk[0].parent = &mpll_clk;
+		ssi2_clk[0].parent = &mpll_clk;
+
+		vpu_clk.parent = &mpll_clk;
+	}
+}
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mxc_clocks_init(unsigned long fref)
+{
+	u32 cscr;
+	struct clk **clkp;
+
+	external_high_reference = fref;
+
+	/* detect clock reference for both system PLL */
+	cscr = CSCR();
+	if (cscr & CCM_CSCR_MCU)
+		mpll_clk.parent = &ckih_clk;
+	else
+		mpll_clk.parent = &ckil_clk;
+
+	if (cscr & CCM_CSCR_SP)
+		spll_clk.parent = &ckih_clk;
+	else
+		spll_clk.parent = &ckil_clk;
+
+	probe_mxc_clocks();
+
+	per_clk[0].enable(&per_clk[0]);
+	gpt1_clk[1].enable(&gpt1_clk[1]);
+
+	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
+		clk_register(*clkp);
+
+	/* Turn off all possible clocks */
+	__raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0);
+	__raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK,
+		     CCM_PCCR1);
+	spll_clk.disable(&spll_clk);
+
+	/* This will propagate to all children and init all the clock rates */
+
+	clk_enable(&emi_clk);
+	clk_enable(&gpio_clk);
+	clk_enable(&iim_clk);
+	clk_enable(&gpt1_clk[0]);
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+	clk_enable(&uart1_clk[0]);
+#endif
+	return 0;
+}
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
new file mode 100644
index 000000000000..d6b5c2e3377f
--- /dev/null
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/*
+ * i.MX27 specific CPU detection code
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <asm/hardware.h>
+
+#include "crm_regs.h"
+
+static int cpu_silicon_rev = -1;
+static int cpu_partnumber;
+
+static void query_silicon_parameter(void)
+{
+	u32 val;
+	/*
+	 * now we have access to the IO registers. As we need
+	 * the silicon revision very early we read it here to
+	 * avoid any further hooks
+	*/
+	val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+
+	cpu_silicon_rev = (int)(val >> 28);
+	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx27
+ */
+int mx27_revision(void)
+{
+	if (cpu_silicon_rev == -1)
+		query_silicon_parameter();
+
+	if (cpu_partnumber != 0x8821)
+		return -EINVAL;
+
+	return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx27_revision);
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
new file mode 100644
index 000000000000..a40a9b950ce9
--- /dev/null
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -0,0 +1,273 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
+
+#include <asm/arch/hardware.h>
+
+/* Register offsets */
+#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
+#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
+#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
+#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
+#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
+#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
+#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
+#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
+#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
+#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
+#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
+#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
+#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
+#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+
+#define CCM_CSCR_USB_OFFSET     28
+#define CCM_CSCR_USB_MASK       (0x7 << 28)
+#define CCM_CSCR_SD_OFFSET      24
+#define CCM_CSCR_SD_MASK        (0x3 << 24)
+#define CCM_CSCR_SSI2           (1 << 23)
+#define CCM_CSCR_SSI2_OFFSET    23
+#define CCM_CSCR_SSI1           (1 << 22)
+#define CCM_CSCR_SSI1_OFFSET    22
+#define CCM_CSCR_VPU           (1 << 21)
+#define CCM_CSCR_VPU_OFFSET    21
+#define CCM_CSCR_MSHC           (1 << 20)
+#define CCM_CSCR_SPLLRES        (1 << 19)
+#define CCM_CSCR_MPLLRES        (1 << 18)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_ARM_SRC        (1 << 15)
+#define CCM_CSCR_ARM_OFFSET     12
+#define CCM_CSCR_ARM_MASK       (0x3 << 12)
+/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_PRESC_OFFSET   13
+#define CCM_CSCR_PRESC_MASK     (0x7 << 13)
+#define CCM_CSCR_BCLK_OFFSET    9
+#define CCM_CSCR_BCLK_MASK      (0xf << 9)
+#define CCM_CSCR_IPDIV_OFFSET   8
+#define CCM_CSCR_IPDIV          (1 << 8)
+/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_AHB_OFFSET     8
+#define CCM_CSCR_AHB_MASK       (0x3 << 8)
+/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           1
+
+#define CCM_MPCTL0_CPLM         (1 << 31)
+#define CCM_MPCTL0_PD_OFFSET    26
+#define CCM_MPCTL0_PD_MASK      (0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET   16
+#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET   10
+#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET   0
+#define CCM_MPCTL0_MFN_MASK     0x3ff
+
+#define CCM_MPCTL1_LF           (1 << 15)
+#define CCM_MPCTL1_BRMO         (1 << 6)
+
+#define CCM_SPCTL0_CPLM         (1 << 31)
+#define CCM_SPCTL0_PD_OFFSET    26
+#define CCM_SPCTL0_PD_MASK      (0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET   16
+#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET   10
+#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET   0
+#define CCM_SPCTL0_MFN_MASK     0x3ff
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET       16
+#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET        8
+#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET    0
+#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
+#define CCM_PCDR0_CLKO_EN               25
+#define CCM_PCDR0_CLKODIV_OFFSET        22
+#define CCM_PCDR0_CLKODIV_MASK          (0x7 << 22)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
+/*The difinition for i.MX27 TO2*/
+#define CCM_PCDR0_VPUDIV2_OFFSET        10
+#define CCM_PCDR0_VPUDIV2_MASK          (0x3f << 10)
+#define CCM_PCDR0_NFCDIV2_OFFSET         6
+#define CCM_PCDR0_NFCDIV2_MASK           (0xf << 6)
+#define CCM_PCDR0_MSHCDIV2_MASK          0x3f
+/*The difinition for i.MX27 TO2*/
+#define CCM_PCDR0_NFCDIV_OFFSET         12
+#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
+#define CCM_PCDR0_VPUDIV_OFFSET        8
+#define CCM_PCDR0_VPUDIV_MASK          (0xf << 8)
+#define CCM_PCDR0_MSHCDIV_OFFSET        0
+#define CCM_PCDR0_MSHCDIV_MASK          0x1f
+
+#define CCM_PCDR1_PERDIV4_OFFSET        24
+#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET        16
+#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET        8
+#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET        0
+#define CCM_PCDR1_PERDIV1_MASK          0x3f
+
+#define CCM_PCCR0_CSPI1_OFFSET          31
+#define CCM_PCCR0_CSPI1_MASK            (1 << 31)
+#define CCM_PCCR0_CSPI2_OFFSET          30
+#define CCM_PCCR0_CSPI2_MASK            (1 << 30)
+#define CCM_PCCR0_CSPI3_OFFSET          29
+#define CCM_PCCR0_CSPI3_MASK            (1 << 29)
+#define CCM_PCCR0_DMA_OFFSET            28
+#define CCM_PCCR0_DMA_MASK              (1 << 28)
+#define CCM_PCCR0_EMMA_OFFSET           27
+#define CCM_PCCR0_EMMA_MASK             (1 << 27)
+#define CCM_PCCR0_FEC_OFFSET            26
+#define CCM_PCCR0_FEC_MASK              (1 << 26)
+#define CCM_PCCR0_GPIO_OFFSET           25
+#define CCM_PCCR0_GPIO_MASK             (1 << 25)
+#define CCM_PCCR0_GPT1_OFFSET           24
+#define CCM_PCCR0_GPT1_MASK             (1 << 24)
+#define CCM_PCCR0_GPT2_OFFSET           23
+#define CCM_PCCR0_GPT2_MASK             (1 << 23)
+#define CCM_PCCR0_GPT3_OFFSET           22
+#define CCM_PCCR0_GPT3_MASK             (1 << 22)
+#define CCM_PCCR0_GPT4_OFFSET           21
+#define CCM_PCCR0_GPT4_MASK             (1 << 21)
+#define CCM_PCCR0_GPT5_OFFSET           20
+#define CCM_PCCR0_GPT5_MASK             (1 << 20)
+#define CCM_PCCR0_GPT6_OFFSET           19
+#define CCM_PCCR0_GPT6_MASK             (1 << 19)
+#define CCM_PCCR0_I2C1_OFFSET           18
+#define CCM_PCCR0_I2C1_MASK             (1 << 18)
+#define CCM_PCCR0_I2C2_OFFSET           17
+#define CCM_PCCR0_I2C2_MASK             (1 << 17)
+#define CCM_PCCR0_IIM_OFFSET            16
+#define CCM_PCCR0_IIM_MASK              (1 << 16)
+#define CCM_PCCR0_KPP_OFFSET            15
+#define CCM_PCCR0_KPP_MASK              (1 << 15)
+#define CCM_PCCR0_LCDC_OFFSET           14
+#define CCM_PCCR0_LCDC_MASK             (1 << 14)
+#define CCM_PCCR0_MSHC_OFFSET           13
+#define CCM_PCCR0_MSHC_MASK             (1 << 13)
+#define CCM_PCCR0_OWIRE_OFFSET          12
+#define CCM_PCCR0_OWIRE_MASK            (1 << 12)
+#define CCM_PCCR0_PWM_OFFSET            11
+#define CCM_PCCR0_PWM_MASK              (1 << 11)
+#define CCM_PCCR0_RTC_OFFSET            9
+#define CCM_PCCR0_RTC_MASK              (1 << 9)
+#define CCM_PCCR0_RTIC_OFFSET           8
+#define CCM_PCCR0_RTIC_MASK             (1 << 8)
+#define CCM_PCCR0_SAHARA_OFFSET         7
+#define CCM_PCCR0_SAHARA_MASK           (1 << 7)
+#define CCM_PCCR0_SCC_OFFSET            6
+#define CCM_PCCR0_SCC_MASK              (1 << 6)
+#define CCM_PCCR0_SDHC1_OFFSET          5
+#define CCM_PCCR0_SDHC1_MASK            (1 << 5)
+#define CCM_PCCR0_SDHC2_OFFSET          4
+#define CCM_PCCR0_SDHC2_MASK            (1 << 4)
+#define CCM_PCCR0_SDHC3_OFFSET          3
+#define CCM_PCCR0_SDHC3_MASK            (1 << 3)
+#define CCM_PCCR0_SLCDC_OFFSET          2
+#define CCM_PCCR0_SLCDC_MASK            (1 << 2)
+#define CCM_PCCR0_SSI1_IPG_OFFSET       1
+#define CCM_PCCR0_SSI1_IPG_MASK         (1 << 1)
+#define CCM_PCCR0_SSI2_IPG_OFFSET       0
+#define CCM_PCCR0_SSI2_IPG_MASK         (1 << 0)
+
+#define CCM_PCCR1_UART1_OFFSET          31
+#define CCM_PCCR1_UART1_MASK            (1 << 31)
+#define CCM_PCCR1_UART2_OFFSET          30
+#define CCM_PCCR1_UART2_MASK            (1 << 30)
+#define CCM_PCCR1_UART3_OFFSET          29
+#define CCM_PCCR1_UART3_MASK            (1 << 29)
+#define CCM_PCCR1_UART4_OFFSET          28
+#define CCM_PCCR1_UART4_MASK            (1 << 28)
+#define CCM_PCCR1_UART5_OFFSET          27
+#define CCM_PCCR1_UART5_MASK            (1 << 27)
+#define CCM_PCCR1_UART6_OFFSET          26
+#define CCM_PCCR1_UART6_MASK            (1 << 26)
+#define CCM_PCCR1_USBOTG_OFFSET         25
+#define CCM_PCCR1_USBOTG_MASK           (1 << 25)
+#define CCM_PCCR1_WDT_OFFSET            24
+#define CCM_PCCR1_WDT_MASK              (1 << 24)
+#define CCM_PCCR1_HCLK_ATA_OFFSET       23
+#define CCM_PCCR1_HCLK_ATA_MASK         (1 << 23)
+#define CCM_PCCR1_HCLK_BROM_OFFSET      22
+#define CCM_PCCR1_HCLK_BROM_MASK        (1 << 22)
+#define CCM_PCCR1_HCLK_CSI_OFFSET       21
+#define CCM_PCCR1_HCLK_CSI_MASK         (1 << 21)
+#define CCM_PCCR1_HCLK_DMA_OFFSET       20
+#define CCM_PCCR1_HCLK_DMA_MASK         (1 << 20)
+#define CCM_PCCR1_HCLK_EMI_OFFSET       19
+#define CCM_PCCR1_HCLK_EMI_MASK         (1 << 19)
+#define CCM_PCCR1_HCLK_EMMA_OFFSET      18
+#define CCM_PCCR1_HCLK_EMMA_MASK        (1 << 18)
+#define CCM_PCCR1_HCLK_FEC_OFFSET       17
+#define CCM_PCCR1_HCLK_FEC_MASK         (1 << 17)
+#define CCM_PCCR1_HCLK_VPU_OFFSET       16
+#define CCM_PCCR1_HCLK_VPU_MASK         (1 << 16)
+#define CCM_PCCR1_HCLK_LCDC_OFFSET      15
+#define CCM_PCCR1_HCLK_LCDC_MASK        (1 << 15)
+#define CCM_PCCR1_HCLK_RTIC_OFFSET      14
+#define CCM_PCCR1_HCLK_RTIC_MASK        (1 << 14)
+#define CCM_PCCR1_HCLK_SAHARA_OFFSET    13
+#define CCM_PCCR1_HCLK_SAHARA_MASK      (1 << 13)
+#define CCM_PCCR1_HCLK_SLCDC_OFFSET     12
+#define CCM_PCCR1_HCLK_SLCDC_MASK       (1 << 12)
+#define CCM_PCCR1_HCLK_USBOTG_OFFSET    11
+#define CCM_PCCR1_HCLK_USBOTG_MASK      (1 << 11)
+#define CCM_PCCR1_PERCLK1_OFFSET        10
+#define CCM_PCCR1_PERCLK1_MASK          (1 << 10)
+#define CCM_PCCR1_PERCLK2_OFFSET        9
+#define CCM_PCCR1_PERCLK2_MASK          (1 << 9)
+#define CCM_PCCR1_PERCLK3_OFFSET        8
+#define CCM_PCCR1_PERCLK3_MASK          (1 << 8)
+#define CCM_PCCR1_PERCLK4_OFFSET        7
+#define CCM_PCCR1_PERCLK4_MASK          (1 << 7)
+#define CCM_PCCR1_VPU_BAUD_OFFSET       6
+#define CCM_PCCR1_VPU_BAUD_MASK         (1 << 6)
+#define CCM_PCCR1_SSI1_BAUD_OFFSET      5
+#define CCM_PCCR1_SSI1_BAUD_MASK        (1 << 5)
+#define CCM_PCCR1_SSI2_BAUD_OFFSET      4
+#define CCM_PCCR1_SSI2_BAUD_MASK        (1 << 4)
+#define CCM_PCCR1_NFC_BAUD_OFFSET       3
+#define CCM_PCCR1_NFC_BAUD_MASK         (1 << 3)
+#define CCM_PCCR1_MSHC_BAUD_OFFSET      2
+#define CCM_PCCR1_MSHC_BAUD_MASK        (1 << 2)
+
+#define CCM_CCSR_32KSR          (1 << 15)
+#define CCM_CCSR_CLKMODE1       (1 << 9)
+#define CCM_CCSR_CLKMODE0       (1 << 8)
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK   0x1f
+
+#define SYS_FMCR                0x14	/*  Functional Muxing Control Reg */
+#define SYS_CHIP_ID             0x00	/* The offset of CHIP ID register */
+
+#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
new file mode 100644
index 000000000000..a1f44c3c5315
--- /dev/null
+++ b/arch/arm/mach-mx2/devices.c
@@ -0,0 +1,231 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *       <source@mvista.com>
+ *
+ * Based on the OMAP devices.c
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware.h>
+
+/*
+ * Resource definition for the MXC IrDA
+ */
+static struct resource mxc_irda_resources[] = {
+	[0] = {
+		.start   = UART3_BASE_ADDR,
+		.end     = UART3_BASE_ADDR + SZ_4K - 1,
+		.flags   = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start   = MXC_INT_UART3,
+		.end     = MXC_INT_UART3,
+		.flags   = IORESOURCE_IRQ,
+	},
+};
+
+/* Platform Data for MXC IrDA */
+struct platform_device mxc_irda_device = {
+	.name = "mxc_irda",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_irda_resources),
+	.resource = mxc_irda_resources,
+};
+
+/*
+ * General Purpose Timer
+ * - i.MX1: 2 timer (slighly different register handling)
+ * - i.MX21: 3 timer
+ * - i.MX27: 6 timer
+ */
+
+/* We use gpt0 as system timer, so do not add a device for this one */
+
+static struct resource timer1_resources[] = {
+	[0] = {
+		.start	= GPT2_BASE_ADDR,
+		.end	= GPT2_BASE_ADDR + 0x17,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start   = MXC_INT_GPT2,
+		.end     = MXC_INT_GPT2,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_gpt1 = {
+	.name = "imx_gpt",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(timer1_resources),
+	.resource = timer1_resources
+};
+
+static struct resource timer2_resources[] = {
+	[0] = {
+		.start	= GPT3_BASE_ADDR,
+		.end	= GPT3_BASE_ADDR + 0x17,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start   = MXC_INT_GPT3,
+		.end     = MXC_INT_GPT3,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_gpt2 = {
+	.name = "imx_gpt",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(timer2_resources),
+	.resource = timer2_resources
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource timer3_resources[] = {
+	[0] = {
+		.start	= GPT4_BASE_ADDR,
+		.end	= GPT4_BASE_ADDR + 0x17,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start   = MXC_INT_GPT4,
+		.end     = MXC_INT_GPT4,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_gpt3 = {
+	.name = "imx_gpt",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(timer3_resources),
+	.resource = timer3_resources
+};
+
+static struct resource timer4_resources[] = {
+	[0] = {
+		.start	= GPT5_BASE_ADDR,
+		.end	= GPT5_BASE_ADDR + 0x17,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start   = MXC_INT_GPT5,
+		.end     = MXC_INT_GPT5,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_gpt4 = {
+	.name = "imx_gpt",
+	.id = 4,
+	.num_resources = ARRAY_SIZE(timer4_resources),
+	.resource = timer4_resources
+};
+
+static struct resource timer5_resources[] = {
+	[0] = {
+		.start	= GPT6_BASE_ADDR,
+		.end	= GPT6_BASE_ADDR + 0x17,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start   = MXC_INT_GPT6,
+		.end     = MXC_INT_GPT6,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_gpt5 = {
+	.name = "imx_gpt",
+	.id = 5,
+	.num_resources = ARRAY_SIZE(timer5_resources),
+	.resource = timer5_resources
+};
+#endif
+
+/*
+ * Watchdog:
+ * - i.MX1
+ * - i.MX21
+ * - i.MX27
+ */
+static struct resource mxc_wdt_resources[] = {
+	{
+		.start	= WDOG_BASE_ADDR,
+		.end	= WDOG_BASE_ADDR + 0x30,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdt = {
+	.name = "mxc_wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
+	.resource = mxc_wdt_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	[0] = {
+		.chip.label = "gpio-0",
+		.irq = MXC_INT_GPIO,
+		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
+		.virtual_irq_start = MXC_MAX_INT_LINES,
+	},
+	[1] = {
+		.chip.label = "gpio-1",
+		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
+		.virtual_irq_start = MXC_MAX_INT_LINES + 32,
+	},
+	[2] = {
+		.chip.label = "gpio-2",
+		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
+		.virtual_irq_start = MXC_MAX_INT_LINES + 64,
+	},
+	[3] = {
+		.chip.label = "gpio-3",
+		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
+		.virtual_irq_start = MXC_MAX_INT_LINES + 96,
+	},
+	[4] = {
+		.chip.label = "gpio-4",
+		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
+		.virtual_irq_start = MXC_MAX_INT_LINES + 128,
+	},
+	[5] = {
+		.chip.label = "gpio-5",
+		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
+		.virtual_irq_start = MXC_MAX_INT_LINES + 160,
+	}
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
new file mode 100644
index 000000000000..07875cf00de9
--- /dev/null
+++ b/arch/arm/mach-mx2/generic.c
@@ -0,0 +1,74 @@
+/*
+ * generic.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX27 memory map definition */
+static struct map_desc mxc_io_desc[] __initdata = {
+	/*
+	 * this fixed mapping covers:
+	 * - AIPI1
+	 * - AIPI2
+	 * - AITC
+	 * - ROM Patch
+	 * - and some reserved space
+	 */
+	{
+		.virtual = AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(AIPI_BASE_ADDR),
+		.length = AIPI_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - CSI
+	 * - ATA
+	 */
+	{
+		.virtual = SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
+		.length = SAHB1_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - EMI
+	 */
+	{
+		.virtual = X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
+		.length = X_MEMC_SIZE,
+		.type = MT_DEVICE
+	}
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mxc_map_io(void)
+{
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
new file mode 100644
index 000000000000..a9ff01fff137
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -0,0 +1,304 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/arch/common.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/imx-uart.h>
+#include <asm/arch/iomux-mx1-mx2.h>
+#include <asm/arch/board-mx27ads.h>
+
+/* ADS's NOR flash */
+static struct physmap_flash_data mx27ads_flash_data = {
+	.width = 2,
+};
+
+static struct resource mx27ads_flash_resource = {
+	.start = 0xc0000000,
+	.end = 0xc0000000 + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+
+};
+
+static struct platform_device mx27ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx27ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx27ads_flash_resource,
+};
+
+static int mxc_uart0_pins[] = {
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS
+};
+
+static int uart_mxc_port0_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+			ARRAY_SIZE(mxc_uart0_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+}
+
+static int uart_mxc_port0_exit(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+			ARRAY_SIZE(mxc_uart0_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+}
+
+static int mxc_uart1_pins[] = {
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD
+};
+
+static int uart_mxc_port1_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+}
+
+static int uart_mxc_port1_exit(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+}
+
+static int mxc_uart2_pins[] = {
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS
+};
+
+static int uart_mxc_port2_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+}
+
+static int uart_mxc_port2_exit(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+}
+
+static int mxc_uart3_pins[] = {
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD
+};
+
+static int uart_mxc_port3_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
+			ARRAY_SIZE(mxc_uart3_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "UART3");
+}
+
+static int uart_mxc_port3_exit(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
+			ARRAY_SIZE(mxc_uart3_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "UART3");
+}
+
+static int mxc_uart4_pins[] = {
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS
+};
+
+static int uart_mxc_port4_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
+			ARRAY_SIZE(mxc_uart4_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "UART4");
+}
+
+static int uart_mxc_port4_exit(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
+			ARRAY_SIZE(mxc_uart4_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "UART4");
+}
+
+static int mxc_uart5_pins[] = {
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS
+};
+
+static int uart_mxc_port5_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
+			ARRAY_SIZE(mxc_uart5_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "UART5");
+}
+
+static int uart_mxc_port5_exit(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
+			ARRAY_SIZE(mxc_uart5_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "UART5");
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx27ads_nor_mtd_device,
+};
+
+static int mxc_fec_pins[] = {
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_CLR,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN
+};
+
+static void gpio_fec_active(void)
+{
+	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+			ARRAY_SIZE(mxc_fec_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+}
+
+static void gpio_fec_inactive(void)
+{
+	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+			ARRAY_SIZE(mxc_fec_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+}
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.init = uart_mxc_port0_init,
+		.exit = uart_mxc_port0_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.init = uart_mxc_port1_init,
+		.exit = uart_mxc_port1_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.init = uart_mxc_port2_init,
+		.exit = uart_mxc_port2_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.init = uart_mxc_port3_init,
+		.exit = uart_mxc_port3_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.init = uart_mxc_port4_init,
+		.exit = uart_mxc_port4_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.init = uart_mxc_port5_init,
+		.exit = uart_mxc_port5_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static void __init mx27ads_board_init(void)
+{
+	int i;
+
+	gpio_fec_active();
+
+	for (i = 0; i < 6; i++)
+		imx_init_uart(i, &uart_pdata[i]);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27ads_timer_init(void)
+{
+	unsigned long fref = 26000000;
+
+	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+		fref = 27000000;
+
+	mxc_clocks_init(fref);
+	mxc_timer_init("gpt_clk.0");
+}
+
+struct sys_timer mx27ads_timer = {
+	.init	= mx27ads_timer_init,
+};
+
+static struct map_desc mx27ads_io_desc[] __initdata = {
+	{
+		.virtual = PBC_BASE_ADDRESS,
+		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
+		.length = SZ_1M,
+		.type = MT_DEVICE,
+	},
+};
+
+void __init mx27ads_map_io(void)
+{
+	mxc_map_io();
+	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
+}
+
+MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27ads_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx27ads_board_init,
+	.timer          = &mx27ads_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
new file mode 100644
index 000000000000..a9a28f58e714
--- /dev/null
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/arch/common.h>
+#include <asm/hardware.h>
+#include <asm/arch/iomux-mx1-mx2.h>
+#include <asm/mach/time.h>
+#include <asm/arch/imx-uart.h>
+#include <asm/arch/board-pcm038.h>
+
+/*
+ * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
+ * 16 bit width
+ */
+static struct physmap_flash_data pcm038_flash_data = {
+	.width = 2,
+};
+
+static struct resource pcm038_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc1ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_flash_resource,
+};
+
+static int mxc_uart0_pins[] = {
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS
+};
+
+static int uart_mxc_port0_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+			ARRAY_SIZE(mxc_uart0_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+}
+
+static int uart_mxc_port0_exit(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+			ARRAY_SIZE(mxc_uart0_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+}
+
+static int mxc_uart1_pins[] = {
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD
+};
+
+static int uart_mxc_port1_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+}
+
+static int uart_mxc_port1_exit(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+}
+
+static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
+				PE9_PF_UART3_RXD,
+				PE10_PF_UART3_CTS,
+				PE9_PF_UART3_RXD };
+
+static int uart_mxc_port2_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+}
+
+static int uart_mxc_port2_exit(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+}
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.init = uart_mxc_port0_init,
+		.exit = uart_mxc_port0_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.init = uart_mxc_port1_init,
+		.exit = uart_mxc_port1_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.init = uart_mxc_port2_init,
+		.exit = uart_mxc_port2_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static int mxc_fec_pins[] = {
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_CLR,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN
+};
+
+static void gpio_fec_active(void)
+{
+	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+			ARRAY_SIZE(mxc_fec_pins),
+			MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+}
+
+static void gpio_fec_inactive(void)
+{
+	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+			ARRAY_SIZE(mxc_fec_pins),
+			MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+	&pcm038_nor_mtd_device,
+};
+
+static void __init pcm038_init(void)
+{
+	int i;
+	gpio_fec_active();
+
+	for (i = 0; i < 3; i++)
+		imx_init_uart(i, &uart_pdata[i]);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#ifdef CONFIG_MACH_PCM970_BASEBOARD
+	pcm970_baseboard_init();
+#endif
+}
+
+static void __init pcm038_timer_init(void)
+{
+	mxc_clocks_init(26000000);
+	mxc_timer_init("gpt_clk.0");
+}
+
+struct sys_timer pcm038_timer = {
+	.init = pcm038_timer_init,
+};
+
+MACHINE_START(PCM038, "phyCORE-i.MX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mxc_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = pcm038_init,
+	.timer          = &pcm038_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
new file mode 100644
index 000000000000..028ac4d33684
--- /dev/null
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+/*
+ * system init for baseboard usage. Will be called by pcm038 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init pcm970_baseboard_init(void)
+{
+}
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
new file mode 100644
index 000000000000..570c02b8e5df
--- /dev/null
+++ b/arch/arm/mach-mx2/serial.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
+
+static struct resource uart0[] = {
+	{
+		.start = UART1_BASE_ADDR,
+		.end = UART1_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART1,
+		.end = MXC_INT_UART1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = UART2_BASE_ADDR,
+		.end = UART2_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART2,
+		.end = MXC_INT_UART2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = UART3_BASE_ADDR,
+		.end = UART3_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART3,
+		.end = MXC_INT_UART3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+	{
+		.start = UART4_BASE_ADDR,
+		.end = UART4_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART4,
+		.end = MXC_INT_UART4,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device3 = {
+	.name = "imx-uart",
+	.id = 3,
+	.resource = uart3,
+	.num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+	{
+		.start = UART5_BASE_ADDR,
+		.end = UART5_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART5,
+		.end = MXC_INT_UART5,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device4 = {
+	.name = "imx-uart",
+	.id = 4,
+	.resource = uart4,
+	.num_resources = ARRAY_SIZE(uart4),
+};
+
+static struct resource uart5[] = {
+	{
+		.start = UART6_BASE_ADDR,
+		.end = UART6_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART6,
+		.end = MXC_INT_UART6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device5 = {
+	.name = "imx-uart",
+	.id = 5,
+	.resource = uart5,
+	.num_resources = ARRAY_SIZE(uart5),
+};
+
+/*
+ * Register only those UARTs that physically exists
+ */
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
+{
+	switch (uart_no) {
+	case 0:
+		mxc_uart_device0.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device0);
+		break;
+	case 1:
+		mxc_uart_device1.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device1);
+		break;
+#ifndef CONFIG_MXC_IRDA
+	case 2:
+		mxc_uart_device2.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device2);
+		break;
+#endif
+	case 3:
+		mxc_uart_device3.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device3);
+		break;
+	case 4:
+		mxc_uart_device4.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device4);
+		break;
+	case 5:
+		mxc_uart_device5.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device5);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
new file mode 100644
index 000000000000..99304645299d
--- /dev/null
+++ b/arch/arm/mach-mx2/system.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/system.h>
+
+/*
+ * Put the CPU into idle mode. It is called by default_idle()
+ * in process.c file.
+ */
+void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks.
+	 */
+	cpu_do_idle();
+}
+
+#define WDOG_WCR_REG                    IO_ADDRESS(WDOG_BASE_ADDR)
+#define WDOG_WCR_SRS                    (1 << 4)
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+void arch_reset(char mode)
+{
+	struct clk *clk;
+
+	clk = clk_get(NULL, "wdog_clk");
+	if (!clk) {
+		printk(KERN_ERR"Cannot activate the watchdog. Giving up\n");
+		return;
+	}
+
+	clk_enable(clk);
+
+	/* Assert SRS signal */
+	__raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG);
+}
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 5fe8606cac08..db9431dee1b4 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -8,5 +8,18 @@ config MACH_MX31ADS
 	  Include support for MX31ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_PCM037
+	bool "Support Phytec pcm037 platforms"
+	help
+	  Include support for Phytec pcm037 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+	bool "Support MX31 LITEKIT (LogicPD)"
+	default n
+	help
+	  Include support for MX31 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endmenu
 
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index cbec997f332a..8b21abb71fb0 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,5 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= mm.o time.o
+obj-y			:= mm.o clock.o devices.o iomux.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
+obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
new file mode 100644
index 000000000000..2f3635943e70
--- /dev/null
+++ b/arch/arm/mach-mx3/clock.c
@@ -0,0 +1,1147 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <asm/arch/clock.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
+
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
+{
+	u32 min_pre, temp_pre, old_err, err;
+
+	if (div >= 512) {
+		*pre = 8;
+		*post = 64;
+	} else if (div >= 64) {
+		min_pre = (div - 1) / 64 + 1;
+		old_err = 8;
+		for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+			err = div % temp_pre;
+			if (err == 0) {
+				*pre = temp_pre;
+				break;
+			}
+			err = temp_pre - err;
+			if (err < old_err) {
+				old_err = err;
+				*pre = temp_pre;
+			}
+		}
+		*post = (div + *pre - 1) / *pre;
+	} else if (div <= 8) {
+		*pre = div;
+		*post = 1;
+	} else {
+		*pre = 1;
+		*post = div;
+	}
+}
+
+static struct clk mcu_pll_clk;
+static struct clk mcu_main_clk;
+static struct clk usb_pll_clk;
+static struct clk serial_pll_clk;
+static struct clk ipg_clk;
+static struct clk ckih_clk;
+static struct clk ahb_clk;
+
+static int _clk_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 3 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(3 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static void _clk_emi_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(3 << clk->enable_shift);
+	reg |= (1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	signed long pd = 1;	/* Pre-divider */
+	signed long mfi;	/* Multiplication Factor (Integer part) */
+	signed long mfn;	/* Multiplication Factor (Integer part) */
+	signed long mfd;	/* Multiplication Factor (Denominator Part) */
+	signed long tmp;
+	u32 ref_freq = clk_get_rate(clk->parent);
+
+	while (((ref_freq / pd) * 10) > rate)
+		pd++;
+
+	if ((ref_freq / pd) < PRE_DIV_MIN_FREQ)
+		return -EINVAL;
+
+	/* the ref_freq/2 in the following is to round up */
+	mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq;
+	if (mfi < 5 || mfi > 15)
+		return -EINVAL;
+
+	/* pick a mfd value that will work
+	 * then solve for mfn */
+	mfd = ref_freq / 50000;
+
+	/*
+	 *          pll_freq * pd * mfd
+	 *   mfn = --------------------  -  (mfi * mfd)
+	 *           2 * ref_freq
+	 */
+	/* the tmp/2 is for rounding */
+	tmp = ref_freq / 10000;
+	mfn =
+	    ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) -
+	    (mfi * mfd);
+
+	mfn = mfn & 0x3ff;
+	pd--;
+	mfd--;
+
+	/* Change the Pll value */
+	reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) |
+	    (mfn << MXC_CCM_PCTL_MFN_OFFSET) |
+	    (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET);
+
+	if (clk == &mcu_pll_clk)
+		__raw_writel(reg, MXC_CCM_MPCTL);
+	else if (clk == &usb_pll_clk)
+		__raw_writel(reg, MXC_CCM_UPCTL);
+	else if (clk == &serial_pll_clk)
+		__raw_writel(reg, MXC_CCM_SRPCTL);
+
+	return 0;
+}
+
+static unsigned long _clk_pll_get_rate(struct clk *clk)
+{
+	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+	unsigned long reg, ccmr;
+	s64 temp;
+	unsigned int prcs;
+
+	ccmr = __raw_readl(MXC_CCM_CCMR);
+	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+	if (prcs == 0x1)
+		ref_clk = CKIL_CLK_FREQ * 1024;
+	else
+		ref_clk = clk_get_rate(&ckih_clk);
+
+	if (clk == &mcu_pll_clk) {
+		if ((ccmr & MXC_CCM_CCMR_MPE) == 0)
+			return ref_clk;
+		if ((ccmr & MXC_CCM_CCMR_MDS) != 0)
+			return ref_clk;
+		reg = __raw_readl(MXC_CCM_MPCTL);
+	} else if (clk == &usb_pll_clk)
+		reg = __raw_readl(MXC_CCM_UPCTL);
+	else if (clk == &serial_pll_clk)
+		reg = __raw_readl(MXC_CCM_SRPCTL);
+	else {
+		BUG();
+		return 0;
+	}
+
+	pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET;
+	mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET;
+	mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK;
+
+	if (mfn >= 0x200) {
+		mfn |= 0xFFFFFE00;
+		mfn_abs = -mfn;
+	}
+
+	ref_clk *= 2;
+	ref_clk /= pdf + 1;
+
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd + 1);
+	if (mfn < 0)
+		temp = -temp;
+	temp = (ref_clk * mfi) + temp;
+
+	return temp;
+}
+
+static int _clk_usb_pll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg |= MXC_CCM_CCMR_UPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+
+	/* No lock bit on MX31, so using max time from spec */
+	udelay(80);
+
+	return 0;
+}
+
+static void _clk_usb_pll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_UPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+}
+
+static int _clk_serial_pll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg |= MXC_CCM_CCMR_SPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+
+	/* No lock bit on MX31, so using max time from spec */
+	udelay(80);
+
+	return 0;
+}
+
+static void _clk_serial_pll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_SPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+}
+
+#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
+#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
+#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
+
+static unsigned long _clk_mcu_main_get_rate(struct clk *clk)
+{
+	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
+
+	if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
+		return clk_get_rate(&serial_pll_clk);
+	else
+		return clk_get_rate(&mcu_pll_clk);
+}
+
+static unsigned long _clk_hclk_get_rate(struct clk *clk)
+{
+	unsigned long max_pdf;
+
+	max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
+		       MXC_CCM_PDR0_MAX_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (max_pdf + 1);
+}
+
+static unsigned long _clk_ipg_get_rate(struct clk *clk)
+{
+	unsigned long ipg_pdf;
+
+	ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
+		       MXC_CCM_PDR0_IPG_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
+}
+
+static unsigned long _clk_nfc_get_rate(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+
+	nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
+		       MXC_CCM_PDR0_NFC_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_hsp_get_rate(struct clk *clk)
+{
+	unsigned long hsp_pdf;
+
+	hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
+		       MXC_CCM_PDR0_HSP_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
+}
+
+static unsigned long _clk_usb_get_rate(struct clk *clk)
+{
+	unsigned long usb_pdf, usb_prepdf;
+
+	usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
+		       MXC_CCM_PDR1_USB_PODF_OFFSET);
+	usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
+			  MXC_CCM_PDR1_USB_PRDF_OFFSET);
+	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
+}
+
+static unsigned long _clk_csi_get_rate(struct clk *clk)
+{
+	u32 reg, pre, post;
+
+	reg = __raw_readl(MXC_CCM_PDR0);
+	pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
+	    MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+	pre++;
+	post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
+	    MXC_CCM_PDR0_CSI_PODF_OFFSET;
+	post++;
+	return clk_get_rate(clk->parent) / (pre * post);
+}
+
+static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 pre, post, parent = clk_get_rate(clk->parent);
+	u32 div = parent / rate;
+
+	if (parent % rate)
+		div++;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	return parent / (pre * post);
+}
+
+static int _clk_csi_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+	div = parent / rate;
+
+	if ((parent / div) != rate)
+		return -EINVAL;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	/* Set CSI clock divider */
+	reg = __raw_readl(MXC_CCM_PDR0) &
+	    ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
+	reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
+	reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+	__raw_writel(reg, MXC_CCM_PDR0);
+
+	return 0;
+}
+
+static unsigned long _clk_per_get_rate(struct clk *clk)
+{
+	unsigned long per_pdf;
+
+	per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK,
+		       MXC_CCM_PDR0_PER_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (per_pdf + 1);
+}
+
+static unsigned long _clk_ssi1_get_rate(struct clk *clk)
+{
+	unsigned long ssi1_pdf, ssi1_prepdf;
+
+	ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
+			MXC_CCM_PDR1_SSI1_PODF_OFFSET);
+	ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
+			   MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
+}
+
+static unsigned long _clk_ssi2_get_rate(struct clk *clk)
+{
+	unsigned long ssi2_pdf, ssi2_prepdf;
+
+	ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
+			MXC_CCM_PDR1_SSI2_PODF_OFFSET);
+	ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
+			   MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
+}
+
+static unsigned long _clk_firi_get_rate(struct clk *clk)
+{
+	unsigned long firi_pdf, firi_prepdf;
+
+	firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
+			MXC_CCM_PDR1_FIRI_PODF_OFFSET);
+	firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
+			   MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
+}
+
+static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 pre, post;
+	u32 parent = clk_get_rate(clk->parent);
+	u32 div = parent / rate;
+
+	if (parent % rate)
+		div++;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	return parent / (pre * post);
+
+}
+
+static int _clk_firi_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+	div = parent / rate;
+
+	if ((parent / div) != rate)
+		return -EINVAL;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	/* Set FIRI clock divider */
+	reg = __raw_readl(MXC_CCM_PDR1) &
+	    ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
+	reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
+	reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_PDR1);
+
+	return 0;
+}
+
+static unsigned long _clk_mbx_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 2;
+}
+
+static unsigned long _clk_mstick1_get_rate(struct clk *clk)
+{
+	unsigned long msti_pdf;
+
+	msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
+			MXC_CCM_PDR2_MST1_PDF_OFFSET);
+	return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long _clk_mstick2_get_rate(struct clk *clk)
+{
+	unsigned long msti_pdf;
+
+	msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
+			MXC_CCM_PDR2_MST2_PDF_OFFSET);
+	return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+	return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+	.name = "ckih",
+	.get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+	.name = "ckil",
+	.get_rate = clk_ckil_get_rate,
+};
+
+static struct clk mcu_pll_clk = {
+	.name = "mcu_pll",
+	.parent = &ckih_clk,
+	.set_rate = _clk_pll_set_rate,
+	.get_rate = _clk_pll_get_rate,
+};
+
+static struct clk mcu_main_clk = {
+	.name = "mcu_main_clk",
+	.parent = &mcu_pll_clk,
+	.get_rate = _clk_mcu_main_get_rate,
+};
+
+static struct clk serial_pll_clk = {
+	.name = "serial_pll",
+	.parent = &ckih_clk,
+	.set_rate = _clk_pll_set_rate,
+	.get_rate = _clk_pll_get_rate,
+	.enable = _clk_serial_pll_enable,
+	.disable = _clk_serial_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+	.name = "usb_pll",
+	.parent = &ckih_clk,
+	.set_rate = _clk_pll_set_rate,
+	.get_rate = _clk_pll_get_rate,
+	.enable = _clk_usb_pll_enable,
+	.disable = _clk_usb_pll_disable,
+};
+
+static struct clk ahb_clk = {
+	.name = "ahb_clk",
+	.parent = &mcu_main_clk,
+	.get_rate = _clk_hclk_get_rate,
+};
+
+static struct clk per_clk = {
+	.name = "per_clk",
+	.parent = &usb_pll_clk,
+	.get_rate = _clk_per_get_rate,
+};
+
+static struct clk perclk_clk = {
+	.name = "perclk_clk",
+	.parent = &ipg_clk,
+};
+
+static struct clk cspi_clk[] = {
+	{
+	 .name = "cspi_clk",
+	 .id = 0,
+	 .parent = &ipg_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR2,
+	 .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "cspi_clk",
+	 .id = 1,
+	 .parent = &ipg_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR2,
+	 .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "cspi_clk",
+	 .id = 2,
+	 .parent = &ipg_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET,
+	 .disable = _clk_disable,},
+};
+
+static struct clk ipg_clk = {
+	.name = "ipg_clk",
+	.parent = &ahb_clk,
+	.get_rate = _clk_ipg_get_rate,
+};
+
+static struct clk emi_clk = {
+	.name = "emi_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR2,
+	.enable_shift = MXC_CCM_CGR2_EMI_OFFSET,
+	.disable = _clk_emi_disable,
+};
+
+static struct clk gpt_clk = {
+	.name = "gpt_clk",
+	.parent = &perclk_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR0,
+	.enable_shift = MXC_CCM_CGR0_GPT_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk pwm_clk = {
+	.name = "pwm_clk",
+	.parent = &perclk_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR0,
+	.enable_shift = MXC_CCM_CGR1_PWM_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk epit_clk[] = {
+	{
+	 .name = "epit_clk",
+	 .id = 0,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "epit_clk",
+	 .id = 1,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET,
+	 .disable = _clk_disable,},
+};
+
+static struct clk nfc_clk = {
+	.name = "nfc_clk",
+	.parent = &ahb_clk,
+	.get_rate = _clk_nfc_get_rate,
+};
+
+static struct clk scc_clk = {
+	.name = "scc_clk",
+	.parent = &ipg_clk,
+};
+
+static struct clk ipu_clk = {
+	.name = "ipu_clk",
+	.parent = &mcu_main_clk,
+	.get_rate = _clk_hsp_get_rate,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR1,
+	.enable_shift = MXC_CCM_CGR1_IPU_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+	.name = "kpp_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR1,
+	.enable_shift = MXC_CCM_CGR1_KPP_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk wdog_clk = {
+	.name = "wdog_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR1,
+	.enable_shift = MXC_CCM_CGR1_WDOG_OFFSET,
+	.disable = _clk_disable,
+};
+static struct clk rtc_clk = {
+	.name = "rtc_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR1,
+	.enable_shift = MXC_CCM_CGR1_RTC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk usb_clk[] = {
+	{
+	 .name = "usb_clk",
+	 .parent = &usb_pll_clk,
+	 .get_rate = _clk_usb_get_rate,},
+	{
+	 .name = "usb_ahb_clk",
+	 .parent = &ahb_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR1,
+	 .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET,
+	 .disable = _clk_disable,},
+};
+
+static struct clk csi_clk = {
+	.name = "csi_clk",
+	.parent = &serial_pll_clk,
+	.get_rate = _clk_csi_get_rate,
+	.round_rate = _clk_csi_round_rate,
+	.set_rate = _clk_csi_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR1,
+	.enable_shift = MXC_CCM_CGR1_CSI_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk uart_clk[] = {
+	{
+	 .name = "uart_clk",
+	 .id = 0,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_UART1_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "uart_clk",
+	 .id = 1,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_UART2_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "uart_clk",
+	 .id = 2,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR1,
+	 .enable_shift = MXC_CCM_CGR1_UART3_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "uart_clk",
+	 .id = 3,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR1,
+	 .enable_shift = MXC_CCM_CGR1_UART4_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "uart_clk",
+	 .id = 4,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR1,
+	 .enable_shift = MXC_CCM_CGR1_UART5_OFFSET,
+	 .disable = _clk_disable,},
+};
+
+static struct clk i2c_clk[] = {
+	{
+	 .name = "i2c_clk",
+	 .id = 0,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "i2c_clk",
+	 .id = 1,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "i2c_clk",
+	 .id = 2,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET,
+	 .disable = _clk_disable,},
+};
+
+static struct clk owire_clk = {
+	.name = "owire_clk",
+	.parent = &perclk_clk,
+	.enable_reg = MXC_CCM_CGR1,
+	.enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET,
+	.enable = _clk_enable,
+	.disable = _clk_disable,
+};
+
+static struct clk sdhc_clk[] = {
+	{
+	 .name = "sdhc_clk",
+	 .id = 0,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "sdhc_clk",
+	 .id = 1,
+	 .parent = &perclk_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET,
+	 .disable = _clk_disable,},
+};
+
+static struct clk ssi_clk[] = {
+	{
+	 .name = "ssi_clk",
+	 .parent = &serial_pll_clk,
+	 .get_rate = _clk_ssi1_get_rate,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "ssi_clk",
+	 .id = 1,
+	 .parent = &serial_pll_clk,
+	 .get_rate = _clk_ssi2_get_rate,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR2,
+	 .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET,
+	 .disable = _clk_disable,},
+};
+
+static struct clk firi_clk = {
+	.name = "firi_clk",
+	.parent = &usb_pll_clk,
+	.round_rate = _clk_firi_round_rate,
+	.set_rate = _clk_firi_set_rate,
+	.get_rate = _clk_firi_get_rate,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR2,
+	.enable_shift = MXC_CCM_CGR2_FIRI_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk ata_clk = {
+	.name = "ata_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR0,
+	.enable_shift = MXC_CCM_CGR0_ATA_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk mbx_clk = {
+	.name = "mbx_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR2,
+	.enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
+	.get_rate = _clk_mbx_get_rate,
+};
+
+static struct clk vpu_clk = {
+	.name = "vpu_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR2,
+	.enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
+	.get_rate = _clk_mbx_get_rate,
+};
+
+static struct clk rtic_clk = {
+	.name = "rtic_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR2,
+	.enable_shift = MXC_CCM_CGR2_RTIC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk rng_clk = {
+	.name = "rng_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR0,
+	.enable_shift = MXC_CCM_CGR0_RNG_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk sdma_clk[] = {
+	{
+	 .name = "sdma_ahb_clk",
+	 .parent = &ahb_clk,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR0,
+	 .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "sdma_ipg_clk",
+	 .parent = &ipg_clk,}
+};
+
+static struct clk mpeg4_clk = {
+	.name = "mpeg4_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR1,
+	.enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk vl2cc_clk = {
+	.name = "vl2cc_clk",
+	.parent = &ahb_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR1,
+	.enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk mstick_clk[] = {
+	{
+	 .name = "mstick_clk",
+	 .id = 0,
+	 .parent = &usb_pll_clk,
+	 .get_rate = _clk_mstick1_get_rate,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR1,
+	 .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET,
+	 .disable = _clk_disable,},
+	{
+	 .name = "mstick_clk",
+	 .id = 1,
+	 .parent = &usb_pll_clk,
+	 .get_rate = _clk_mstick2_get_rate,
+	 .enable = _clk_enable,
+	 .enable_reg = MXC_CCM_CGR1,
+	 .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET,
+	 .disable = _clk_disable,},
+};
+
+static struct clk iim_clk = {
+	.name = "iim_clk",
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = MXC_CCM_CGR0,
+	.enable_shift = MXC_CCM_CGR0_IIM_OFFSET,
+	.disable = _clk_disable,
+};
+
+static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 div, parent = clk_get_rate(clk->parent);
+
+	div = parent / rate;
+	if (parent % rate)
+		div++;
+
+	if (div > 8)
+		div = 16;
+	else if (div > 4)
+		div = 8;
+	else if (div > 2)
+		div = 4;
+
+	return parent / div;
+}
+
+static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div, parent = clk_get_rate(clk->parent);
+
+	div = parent / rate;
+
+	if (div == 16)
+		div = 4;
+	else if (div == 8)
+		div = 3;
+	else if (div == 4)
+		div = 2;
+	else if (div == 2)
+		div = 1;
+	else if (div == 1)
+		div = 0;
+	else
+		return -EINVAL;
+
+	reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK;
+	reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET;
+	__raw_writel(reg, MXC_CCM_COSR);
+
+	return 0;
+}
+
+static unsigned long _clk_cko1_get_rate(struct clk *clk)
+{
+	u32 div;
+
+	div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >>
+	    MXC_CCM_COSR_CLKOUTDIV_OFFSET;
+
+	return clk_get_rate(clk->parent) / (1 << div);
+}
+
+static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK;
+
+	if (parent == &mcu_main_clk)
+		reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == &ipg_clk)
+		reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == &usb_pll_clk)
+		reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == mcu_main_clk.parent)
+		reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == &ahb_clk)
+		reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == &serial_pll_clk)
+		reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == &ckih_clk)
+		reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == &emi_clk)
+		reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == &ipu_clk)
+		reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == &nfc_clk)
+		reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else if (parent == &uart_clk[0])
+		reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_COSR);
+
+	return 0;
+}
+
+static int _clk_cko1_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN;
+	__raw_writel(reg, MXC_CCM_COSR);
+
+	return 0;
+}
+
+static void _clk_cko1_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN;
+	__raw_writel(reg, MXC_CCM_COSR);
+}
+
+static struct clk cko1_clk = {
+	.name = "cko1_clk",
+	.get_rate = _clk_cko1_get_rate,
+	.set_rate = _clk_cko1_set_rate,
+	.round_rate = _clk_cko1_round_rate,
+	.set_parent = _clk_cko1_set_parent,
+	.enable = _clk_cko1_enable,
+	.disable = _clk_cko1_disable,
+};
+
+static struct clk *mxc_clks[] = {
+	&ckih_clk,
+	&ckil_clk,
+	&mcu_pll_clk,
+	&usb_pll_clk,
+	&serial_pll_clk,
+	&mcu_main_clk,
+	&ahb_clk,
+	&per_clk,
+	&perclk_clk,
+	&cko1_clk,
+	&emi_clk,
+	&cspi_clk[0],
+	&cspi_clk[1],
+	&cspi_clk[2],
+	&ipg_clk,
+	&gpt_clk,
+	&pwm_clk,
+	&wdog_clk,
+	&rtc_clk,
+	&epit_clk[0],
+	&epit_clk[1],
+	&nfc_clk,
+	&ipu_clk,
+	&kpp_clk,
+	&usb_clk[0],
+	&usb_clk[1],
+	&csi_clk,
+	&uart_clk[0],
+	&uart_clk[1],
+	&uart_clk[2],
+	&uart_clk[3],
+	&uart_clk[4],
+	&i2c_clk[0],
+	&i2c_clk[1],
+	&i2c_clk[2],
+	&owire_clk,
+	&sdhc_clk[0],
+	&sdhc_clk[1],
+	&ssi_clk[0],
+	&ssi_clk[1],
+	&firi_clk,
+	&ata_clk,
+	&rtic_clk,
+	&rng_clk,
+	&sdma_clk[0],
+	&sdma_clk[1],
+	&mstick_clk[0],
+	&mstick_clk[1],
+	&scc_clk,
+	&iim_clk,
+};
+
+int __init mxc_clocks_init(unsigned long fref)
+{
+	u32 reg;
+	struct clk **clkp;
+
+	ckih_rate = fref;
+
+	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
+		clk_register(*clkp);
+
+	if (cpu_is_mx31()) {
+		clk_register(&mpeg4_clk);
+		clk_register(&mbx_clk);
+	} else {
+		clk_register(&vpu_clk);
+		clk_register(&vl2cc_clk);
+	}
+
+	/* Turn off all possible clocks */
+	__raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0);
+	__raw_writel(0, MXC_CCM_CGR1);
+
+	__raw_writel(MXC_CCM_CGR2_EMI_MASK |
+		     MXC_CCM_CGR2_IPMUX1_MASK |
+		     MXC_CCM_CGR2_IPMUX2_MASK |
+		     MXC_CCM_CGR2_MXCCLKENSEL_MASK |	/* for MX32 */
+		     MXC_CCM_CGR2_CHIKCAMPEN_MASK |	/* for MX32 */
+		     MXC_CCM_CGR2_OVRVPUBUSY_MASK |	/* for MX32 */
+		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
+					   MX32, but still required to be set */
+		     MXC_CCM_CGR2);
+
+	clk_disable(&cko1_clk);
+	clk_disable(&usb_pll_clk);
+
+	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
+
+	clk_enable(&gpt_clk);
+	clk_enable(&emi_clk);
+	clk_enable(&iim_clk);
+
+	clk_enable(&serial_pll_clk);
+
+	if (mx31_revision() >= CHIP_REV_2_0) {
+		reg = __raw_readl(MXC_CCM_PMCR1);
+		/* No PLL restart on DVFS switch; enable auto EMI handshake */
+		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
+		__raw_writel(reg, MXC_CCM_PMCR1);
+	}
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
new file mode 100644
index 000000000000..4a0e0ede23bb
--- /dev/null
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -0,0 +1,401 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+
+#define CKIH_CLK_FREQ           26000000
+#define CKIH_CLK_FREQ_27MHZ     27000000
+#define CKIL_CLK_FREQ           32768
+
+#define MXC_CCM_BASE		IO_ADDRESS(CCM_BASE_ADDR)
+
+/* Register addresses */
+#define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)
+#define MXC_CCM_PDR0		(MXC_CCM_BASE + 0x04)
+#define MXC_CCM_PDR1		(MXC_CCM_BASE + 0x08)
+#define MXC_CCM_RCSR		(MXC_CCM_BASE + 0x0C)
+#define MXC_CCM_MPCTL		(MXC_CCM_BASE + 0x10)
+#define MXC_CCM_UPCTL		(MXC_CCM_BASE + 0x14)
+#define MXC_CCM_SRPCTL		(MXC_CCM_BASE + 0x18)
+#define MXC_CCM_COSR		(MXC_CCM_BASE + 0x1C)
+#define MXC_CCM_CGR0		(MXC_CCM_BASE + 0x20)
+#define MXC_CCM_CGR1		(MXC_CCM_BASE + 0x24)
+#define MXC_CCM_CGR2		(MXC_CCM_BASE + 0x28)
+#define MXC_CCM_WIMR		(MXC_CCM_BASE + 0x2C)
+#define MXC_CCM_LDC		(MXC_CCM_BASE + 0x30)
+#define MXC_CCM_DCVR0		(MXC_CCM_BASE + 0x34)
+#define MXC_CCM_DCVR1		(MXC_CCM_BASE + 0x38)
+#define MXC_CCM_DCVR2		(MXC_CCM_BASE + 0x3C)
+#define MXC_CCM_DCVR3		(MXC_CCM_BASE + 0x40)
+#define MXC_CCM_LTR0		(MXC_CCM_BASE + 0x44)
+#define MXC_CCM_LTR1		(MXC_CCM_BASE + 0x48)
+#define MXC_CCM_LTR2		(MXC_CCM_BASE + 0x4C)
+#define MXC_CCM_LTR3		(MXC_CCM_BASE + 0x50)
+#define MXC_CCM_LTBR0		(MXC_CCM_BASE + 0x54)
+#define MXC_CCM_LTBR1		(MXC_CCM_BASE + 0x58)
+#define MXC_CCM_PMCR0		(MXC_CCM_BASE + 0x5C)
+#define MXC_CCM_PMCR1		(MXC_CCM_BASE + 0x60)
+#define MXC_CCM_PDR2		(MXC_CCM_BASE + 0x64)
+
+/* Register bit definitions */
+#define MXC_CCM_CCMR_WBEN                       (1 << 27)
+#define MXC_CCM_CCMR_CSCS                       (1 << 25)
+#define MXC_CCM_CCMR_PERCS                      (1 << 24)
+#define MXC_CCM_CCMR_SSI1S_OFFSET               18
+#define MXC_CCM_CCMR_SSI1S_MASK                 (0x3 << 18)
+#define MXC_CCM_CCMR_SSI2S_OFFSET               21
+#define MXC_CCM_CCMR_SSI2S_MASK                 (0x3 << 21)
+#define MXC_CCM_CCMR_LPM_OFFSET                 14
+#define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
+#define MXC_CCM_CCMR_FIRS_OFFSET                11
+#define MXC_CCM_CCMR_FIRS_MASK                  (0x3 << 11)
+#define MXC_CCM_CCMR_UPE                        (1 << 9)
+#define MXC_CCM_CCMR_SPE                        (1 << 8)
+#define MXC_CCM_CCMR_MDS                        (1 << 7)
+#define MXC_CCM_CCMR_SBYCS                      (1 << 4)
+#define MXC_CCM_CCMR_MPE                        (1 << 3)
+#define MXC_CCM_CCMR_PRCS_OFFSET                1
+#define MXC_CCM_CCMR_PRCS_MASK                  (0x3 << 1)
+
+#define MXC_CCM_PDR0_CSI_PODF_OFFSET            26
+#define MXC_CCM_PDR0_CSI_PODF_MASK              (0x3F << 26)
+#define MXC_CCM_PDR0_CSI_PRDF_OFFSET            23
+#define MXC_CCM_PDR0_CSI_PRDF_MASK              (0x7 << 23)
+#define MXC_CCM_PDR0_PER_PODF_OFFSET            16
+#define MXC_CCM_PDR0_PER_PODF_MASK              (0x1F << 16)
+#define MXC_CCM_PDR0_HSP_PODF_OFFSET            11
+#define MXC_CCM_PDR0_HSP_PODF_MASK              (0x7 << 11)
+#define MXC_CCM_PDR0_NFC_PODF_OFFSET            8
+#define MXC_CCM_PDR0_NFC_PODF_MASK              (0x7 << 8)
+#define MXC_CCM_PDR0_IPG_PODF_OFFSET            6
+#define MXC_CCM_PDR0_IPG_PODF_MASK              (0x3 << 6)
+#define MXC_CCM_PDR0_MAX_PODF_OFFSET            3
+#define MXC_CCM_PDR0_MAX_PODF_MASK              (0x7 << 3)
+#define MXC_CCM_PDR0_MCU_PODF_OFFSET            0
+#define MXC_CCM_PDR0_MCU_PODF_MASK              0x7
+
+#define MXC_CCM_PDR0_HSP_DIV_1                  (0x0 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_2                  (0x1 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_3                  (0x2 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_4                  (0x3 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_5                  (0x4 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_6                  (0x5 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_7                  (0x6 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_8                  (0x7 << 11)
+
+#define MXC_CCM_PDR0_IPG_DIV_1                  (0x0 << 6)
+#define MXC_CCM_PDR0_IPG_DIV_2                  (0x1 << 6)
+#define MXC_CCM_PDR0_IPG_DIV_3                  (0x2 << 6)
+#define MXC_CCM_PDR0_IPG_DIV_4                  (0x3 << 6)
+
+#define MXC_CCM_PDR0_MAX_DIV_1                  (0x0 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_2                  (0x1 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_3                  (0x2 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_4                  (0x3 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_5                  (0x4 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_6                  (0x5 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_7                  (0x6 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_8                  (0x7 << 3)
+
+#define MXC_CCM_PDR0_NFC_DIV_1                  (0x0 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_2                  (0x1 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_3                  (0x2 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_4                  (0x3 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_5                  (0x4 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_6                  (0x5 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_7                  (0x6 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_8                  (0x7 << 8)
+
+#define MXC_CCM_PDR0_MCU_DIV_1                  0x0
+#define MXC_CCM_PDR0_MCU_DIV_2                  0x1
+#define MXC_CCM_PDR0_MCU_DIV_3                  0x2
+#define MXC_CCM_PDR0_MCU_DIV_4                  0x3
+#define MXC_CCM_PDR0_MCU_DIV_5                  0x4
+#define MXC_CCM_PDR0_MCU_DIV_6                  0x5
+#define MXC_CCM_PDR0_MCU_DIV_7                  0x6
+#define MXC_CCM_PDR0_MCU_DIV_8                  0x7
+
+#define MXC_CCM_PDR1_USB_PRDF_OFFSET            30
+#define MXC_CCM_PDR1_USB_PRDF_MASK              (0x3 << 30)
+#define MXC_CCM_PDR1_USB_PODF_OFFSET            27
+#define MXC_CCM_PDR1_USB_PODF_MASK              (0x7 << 27)
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET       24
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK         (0x7 << 24)
+#define MXC_CCM_PDR1_FIRI_PODF_OFFSET           18
+#define MXC_CCM_PDR1_FIRI_PODF_MASK             (0x3F << 18)
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET       15
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK         (0x7 << 15)
+#define MXC_CCM_PDR1_SSI2_PODF_OFFSET           9
+#define MXC_CCM_PDR1_SSI2_PODF_MASK             (0x3F << 9)
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET       6
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK         (0x7 << 6)
+#define MXC_CCM_PDR1_SSI1_PODF_OFFSET           0
+#define MXC_CCM_PDR1_SSI1_PODF_MASK             0x3F
+
+/* Bit definitions for RCSR */
+#define MXC_CCM_RCSR_NF16B			0x80000000
+
+/* Bit definitions for both MCU, USB and SR PLL control registers */
+#define MXC_CCM_PCTL_BRM                        0x80000000
+#define MXC_CCM_PCTL_PD_OFFSET                  26
+#define MXC_CCM_PCTL_PD_MASK                    (0xF << 26)
+#define MXC_CCM_PCTL_MFD_OFFSET                 16
+#define MXC_CCM_PCTL_MFD_MASK                   (0x3FF << 16)
+#define MXC_CCM_PCTL_MFI_OFFSET                 10
+#define MXC_CCM_PCTL_MFI_MASK                   (0xF << 10)
+#define MXC_CCM_PCTL_MFN_OFFSET                 0
+#define MXC_CCM_PCTL_MFN_MASK                   0x3FF
+
+#define MXC_CCM_CGR0_SD_MMC1_OFFSET             0
+#define MXC_CCM_CGR0_SD_MMC1_MASK               (0x3 << 0)
+#define MXC_CCM_CGR0_SD_MMC2_OFFSET             2
+#define MXC_CCM_CGR0_SD_MMC2_MASK               (0x3 << 2)
+#define MXC_CCM_CGR0_GPT_OFFSET                 4
+#define MXC_CCM_CGR0_GPT_MASK                   (0x3 << 4)
+#define MXC_CCM_CGR0_EPIT1_OFFSET               6
+#define MXC_CCM_CGR0_EPIT1_MASK                 (0x3 << 6)
+#define MXC_CCM_CGR0_EPIT2_OFFSET               8
+#define MXC_CCM_CGR0_EPIT2_MASK                 (0x3 << 8)
+#define MXC_CCM_CGR0_IIM_OFFSET                 10
+#define MXC_CCM_CGR0_IIM_MASK                   (0x3 << 10)
+#define MXC_CCM_CGR0_ATA_OFFSET                 12
+#define MXC_CCM_CGR0_ATA_MASK                   (0x3 << 12)
+#define MXC_CCM_CGR0_SDMA_OFFSET                14
+#define MXC_CCM_CGR0_SDMA_MASK                  (0x3 << 14)
+#define MXC_CCM_CGR0_CSPI3_OFFSET               16
+#define MXC_CCM_CGR0_CSPI3_MASK                 (0x3 << 16)
+#define MXC_CCM_CGR0_RNG_OFFSET                 18
+#define MXC_CCM_CGR0_RNG_MASK                   (0x3 << 18)
+#define MXC_CCM_CGR0_UART1_OFFSET               20
+#define MXC_CCM_CGR0_UART1_MASK                 (0x3 << 20)
+#define MXC_CCM_CGR0_UART2_OFFSET               22
+#define MXC_CCM_CGR0_UART2_MASK                 (0x3 << 22)
+#define MXC_CCM_CGR0_SSI1_OFFSET                24
+#define MXC_CCM_CGR0_SSI1_MASK                  (0x3 << 24)
+#define MXC_CCM_CGR0_I2C1_OFFSET                26
+#define MXC_CCM_CGR0_I2C1_MASK                  (0x3 << 26)
+#define MXC_CCM_CGR0_I2C2_OFFSET                28
+#define MXC_CCM_CGR0_I2C2_MASK                  (0x3 << 28)
+#define MXC_CCM_CGR0_I2C3_OFFSET                30
+#define MXC_CCM_CGR0_I2C3_MASK                  (0x3 << 30)
+
+#define MXC_CCM_CGR1_HANTRO_OFFSET              0
+#define MXC_CCM_CGR1_HANTRO_MASK                (0x3 << 0)
+#define MXC_CCM_CGR1_MEMSTICK1_OFFSET           2
+#define MXC_CCM_CGR1_MEMSTICK1_MASK             (0x3 << 2)
+#define MXC_CCM_CGR1_MEMSTICK2_OFFSET           4
+#define MXC_CCM_CGR1_MEMSTICK2_MASK             (0x3 << 4)
+#define MXC_CCM_CGR1_CSI_OFFSET                 6
+#define MXC_CCM_CGR1_CSI_MASK                   (0x3 << 6)
+#define MXC_CCM_CGR1_RTC_OFFSET                 8
+#define MXC_CCM_CGR1_RTC_MASK                   (0x3 << 8)
+#define MXC_CCM_CGR1_WDOG_OFFSET                10
+#define MXC_CCM_CGR1_WDOG_MASK                  (0x3 << 10)
+#define MXC_CCM_CGR1_PWM_OFFSET                 12
+#define MXC_CCM_CGR1_PWM_MASK                   (0x3 << 12)
+#define MXC_CCM_CGR1_SIM_OFFSET                 14
+#define MXC_CCM_CGR1_SIM_MASK                   (0x3 << 14)
+#define MXC_CCM_CGR1_ECT_OFFSET                 16
+#define MXC_CCM_CGR1_ECT_MASK                   (0x3 << 16)
+#define MXC_CCM_CGR1_USBOTG_OFFSET              18
+#define MXC_CCM_CGR1_USBOTG_MASK                (0x3 << 18)
+#define MXC_CCM_CGR1_KPP_OFFSET                 20
+#define MXC_CCM_CGR1_KPP_MASK                   (0x3 << 20)
+#define MXC_CCM_CGR1_IPU_OFFSET                 22
+#define MXC_CCM_CGR1_IPU_MASK                   (0x3 << 22)
+#define MXC_CCM_CGR1_UART3_OFFSET               24
+#define MXC_CCM_CGR1_UART3_MASK                 (0x3 << 24)
+#define MXC_CCM_CGR1_UART4_OFFSET               26
+#define MXC_CCM_CGR1_UART4_MASK                 (0x3 << 26)
+#define MXC_CCM_CGR1_UART5_OFFSET               28
+#define MXC_CCM_CGR1_UART5_MASK                 (0x3 << 28)
+#define MXC_CCM_CGR1_OWIRE_OFFSET               30
+#define MXC_CCM_CGR1_OWIRE_MASK                 (0x3 << 30)
+
+#define MXC_CCM_CGR2_SSI2_OFFSET                0
+#define MXC_CCM_CGR2_SSI2_MASK                  (0x3 << 0)
+#define MXC_CCM_CGR2_CSPI1_OFFSET               2
+#define MXC_CCM_CGR2_CSPI1_MASK                 (0x3 << 2)
+#define MXC_CCM_CGR2_CSPI2_OFFSET               4
+#define MXC_CCM_CGR2_CSPI2_MASK                 (0x3 << 4)
+#define MXC_CCM_CGR2_GACC_OFFSET                6
+#define MXC_CCM_CGR2_GACC_MASK                  (0x3 << 6)
+#define MXC_CCM_CGR2_EMI_OFFSET                 8
+#define MXC_CCM_CGR2_EMI_MASK                   (0x3 << 8)
+#define MXC_CCM_CGR2_RTIC_OFFSET                10
+#define MXC_CCM_CGR2_RTIC_MASK                  (0x3 << 10)
+#define MXC_CCM_CGR2_FIRI_OFFSET                12
+#define MXC_CCM_CGR2_FIRI_MASK                  (0x3 << 12)
+#define MXC_CCM_CGR2_IPMUX1_OFFSET              14
+#define MXC_CCM_CGR2_IPMUX1_MASK                (0x3 << 14)
+#define MXC_CCM_CGR2_IPMUX2_OFFSET              16
+#define MXC_CCM_CGR2_IPMUX2_MASK                (0x3 << 16)
+
+/* These new CGR2 bits are added in MX32 */
+#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET	18
+#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK		(0x3 << 18)
+#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET	20
+#define MXC_CCM_CGR2_APMSSICLKSEL_MASK		(0x3 << 20)
+#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET	22
+#define MXC_CCM_CGR2_APMPERCLKSEL_MASK		(0x3 << 22)
+#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET		24
+#define MXC_CCM_CGR2_MXCCLKENSEL_MASK		(0x1 << 24)
+#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET		25
+#define MXC_CCM_CGR2_CHIKCAMPEN_MASK		(0x1 << 25)
+#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET		26
+#define MXC_CCM_CGR2_OVRVPUBUSY_MASK		(0x1 << 26)
+#define MXC_CCM_CGR2_APMENA_OFFSET		30
+#define MXC_CCM_CGR2_AOMENA_MASK		(0x1 << 30)
+
+/*
+ * LTR0 register offsets
+ */
+#define MXC_CCM_LTR0_DIV3CK_OFFSET              1
+#define MXC_CCM_LTR0_DIV3CK_MASK                (0x3 << 1)
+#define MXC_CCM_LTR0_DNTHR_OFFSET               16
+#define MXC_CCM_LTR0_DNTHR_MASK                 (0x3F << 16)
+#define MXC_CCM_LTR0_UPTHR_OFFSET               22
+#define MXC_CCM_LTR0_UPTHR_MASK                 (0x3F << 22)
+
+/*
+ * LTR1 register offsets
+ */
+#define MXC_CCM_LTR1_PNCTHR_OFFSET              0
+#define MXC_CCM_LTR1_PNCTHR_MASK                0x3F
+#define MXC_CCM_LTR1_UPCNT_OFFSET               6
+#define MXC_CCM_LTR1_UPCNT_MASK                 (0xFF << 6)
+#define MXC_CCM_LTR1_DNCNT_OFFSET               14
+#define MXC_CCM_LTR1_DNCNT_MASK                 (0xFF << 14)
+#define MXC_CCM_LTR1_LTBRSR_MASK                0x400000
+#define MXC_CCM_LTR1_LTBRSR_OFFSET              22
+#define MXC_CCM_LTR1_LTBRSR                     0x400000
+#define MXC_CCM_LTR1_LTBRSH                     0x800000
+
+/*
+ * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15
+ */
+#define MXC_CCM_LTR2_WSW_OFFSET(x)              (11 + (x) * 3)
+#define MXC_CCM_LTR2_WSW_MASK(x)                (0x7 << \
+					MXC_CCM_LTR2_WSW_OFFSET((x)))
+#define MXC_CCM_LTR2_EMAC_OFFSET                0
+#define MXC_CCM_LTR2_EMAC_MASK                  0x1FF
+
+/*
+ * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8
+ */
+#define MXC_CCM_LTR3_WSW_OFFSET(x)              (5 + (x) * 3)
+#define MXC_CCM_LTR3_WSW_MASK(x)                (0x7 << \
+					MXC_CCM_LTR3_WSW_OFFSET((x)))
+
+#define MXC_CCM_PMCR0_DFSUP1                    0x80000000
+#define MXC_CCM_PMCR0_DFSUP1_SPLL               (0 << 31)
+#define MXC_CCM_PMCR0_DFSUP1_MPLL               (1 << 31)
+#define MXC_CCM_PMCR0_DFSUP0                    0x40000000
+#define MXC_CCM_PMCR0_DFSUP0_PLL                (0 << 30)
+#define MXC_CCM_PMCR0_DFSUP0_PDR                (1 << 30)
+#define MXC_CCM_PMCR0_DFSUP_MASK                (0x3 << 30)
+
+#define DVSUP_TURBO				0
+#define DVSUP_HIGH				1
+#define DVSUP_MEDIUM				2
+#define DVSUP_LOW				3
+#define MXC_CCM_PMCR0_DVSUP_TURBO               (DVSUP_TURBO << 28)
+#define MXC_CCM_PMCR0_DVSUP_HIGH                (DVSUP_HIGH << 28)
+#define MXC_CCM_PMCR0_DVSUP_MEDIUM              (DVSUP_MEDIUM << 28)
+#define MXC_CCM_PMCR0_DVSUP_LOW                 (DVSUP_LOW << 28)
+#define MXC_CCM_PMCR0_DVSUP_OFFSET              28
+#define MXC_CCM_PMCR0_DVSUP_MASK                (0x3 << 28)
+#define MXC_CCM_PMCR0_UDSC                      0x08000000
+#define MXC_CCM_PMCR0_UDSC_MASK                 (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_UP                   (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_DOWN                 (0 << 27)
+
+#define MXC_CCM_PMCR0_VSCNT_1                   (0x0 << 24)
+#define MXC_CCM_PMCR0_VSCNT_2                   (0x1 << 24)
+#define MXC_CCM_PMCR0_VSCNT_3                   (0x2 << 24)
+#define MXC_CCM_PMCR0_VSCNT_4                   (0x3 << 24)
+#define MXC_CCM_PMCR0_VSCNT_5                   (0x4 << 24)
+#define MXC_CCM_PMCR0_VSCNT_6                   (0x5 << 24)
+#define MXC_CCM_PMCR0_VSCNT_7                   (0x6 << 24)
+#define MXC_CCM_PMCR0_VSCNT_8                   (0x7 << 24)
+#define MXC_CCM_PMCR0_VSCNT_OFFSET              24
+#define MXC_CCM_PMCR0_VSCNT_MASK                (0x7 << 24)
+#define MXC_CCM_PMCR0_DVFEV                     0x00800000
+#define MXC_CCM_PMCR0_DVFIS                     0x00400000
+#define MXC_CCM_PMCR0_LBMI                      0x00200000
+#define MXC_CCM_PMCR0_LBFL                      0x00100000
+#define MXC_CCM_PMCR0_LBCF_4                    (0x0 << 18)
+#define MXC_CCM_PMCR0_LBCF_8                    (0x1 << 18)
+#define MXC_CCM_PMCR0_LBCF_12                   (0x2 << 18)
+#define MXC_CCM_PMCR0_LBCF_16                   (0x3 << 18)
+#define MXC_CCM_PMCR0_LBCF_OFFSET               18
+#define MXC_CCM_PMCR0_LBCF_MASK                 (0x3 << 18)
+#define MXC_CCM_PMCR0_PTVIS                     0x00020000
+#define MXC_CCM_PMCR0_UPDTEN                    0x00010000
+#define MXC_CCM_PMCR0_UPDTEN_MASK               (0x1 << 16)
+#define MXC_CCM_PMCR0_FSVAIM                    0x00008000
+#define MXC_CCM_PMCR0_FSVAI_OFFSET              13
+#define MXC_CCM_PMCR0_FSVAI_MASK                (0x3 << 13)
+#define MXC_CCM_PMCR0_DPVCR                     0x00001000
+#define MXC_CCM_PMCR0_DPVV                      0x00000800
+#define MXC_CCM_PMCR0_WFIM                      0x00000400
+#define MXC_CCM_PMCR0_DRCE3                     0x00000200
+#define MXC_CCM_PMCR0_DRCE2                     0x00000100
+#define MXC_CCM_PMCR0_DRCE1                     0x00000080
+#define MXC_CCM_PMCR0_DRCE0                     0x00000040
+#define MXC_CCM_PMCR0_DCR                       0x00000020
+#define MXC_CCM_PMCR0_DVFEN                     0x00000010
+#define MXC_CCM_PMCR0_PTVAIM                    0x00000008
+#define MXC_CCM_PMCR0_PTVAI_OFFSET              1
+#define MXC_CCM_PMCR0_PTVAI_MASK                (0x3 << 1)
+#define MXC_CCM_PMCR0_DPTEN                     0x00000001
+
+#define MXC_CCM_PMCR1_DVGP_OFFSET               0
+#define MXC_CCM_PMCR1_DVGP_MASK                 (0xF)
+
+#define MXC_CCM_PMCR1_PLLRDIS                      (0x1 << 7)
+#define MXC_CCM_PMCR1_EMIRQ_EN                      (0x1 << 8)
+
+#define MXC_CCM_DCVR_ULV_MASK                   (0x3FF << 22)
+#define MXC_CCM_DCVR_ULV_OFFSET                 22
+#define MXC_CCM_DCVR_LLV_MASK                   (0x3FF << 12)
+#define MXC_CCM_DCVR_LLV_OFFSET                 12
+#define MXC_CCM_DCVR_ELV_MASK                   (0x3FF << 2)
+#define MXC_CCM_DCVR_ELV_OFFSET                 2
+
+#define MXC_CCM_PDR2_MST2_PDF_MASK              (0x3F << 7)
+#define MXC_CCM_PDR2_MST2_PDF_OFFSET            7
+#define MXC_CCM_PDR2_MST1_PDF_MASK              0x3F
+#define MXC_CCM_PDR2_MST1_PDF_OFFSET            0
+
+#define MXC_CCM_COSR_CLKOSEL_MASK               0x0F
+#define MXC_CCM_COSR_CLKOSEL_OFFSET             0
+#define MXC_CCM_COSR_CLKOUTDIV_MASK             (0x07 << 6)
+#define MXC_CCM_COSR_CLKOUTDIV_OFFSET           6
+#define MXC_CCM_COSR_CLKOEN                     (1 << 9)
+
+/*
+ * PMCR0 register offsets
+ */
+#define MXC_CCM_PMCR0_LBFL_OFFSET   20
+#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30
+#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31
+
+#endif				/* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
new file mode 100644
index 000000000000..5c0320fce5b6
--- /dev/null
+++ b/arch/arm/mach-mx3/devices.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
+
+static struct resource uart0[] = {
+	{
+		.start = UART1_BASE_ADDR,
+		.end = UART1_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART1,
+		.end = MXC_INT_UART1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = UART2_BASE_ADDR,
+		.end = UART2_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART2,
+		.end = MXC_INT_UART2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = UART3_BASE_ADDR,
+		.end = UART3_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART3,
+		.end = MXC_INT_UART3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+	{
+		.start = UART4_BASE_ADDR,
+		.end = UART4_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART4,
+		.end = MXC_INT_UART4,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device3 = {
+	.name = "imx-uart",
+	.id = 3,
+	.resource = uart3,
+	.num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+	{
+		.start = UART5_BASE_ADDR,
+		.end = UART5_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_UART5,
+		.end = MXC_INT_UART5,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mxc_uart_device4 = {
+	.name = "imx-uart",
+	.id = 4,
+	.resource = uart4,
+	.num_resources = ARRAY_SIZE(uart4),
+};
+
+/*
+ * Register only those UARTs that physically exist
+ */
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
+{
+	switch (uart_no) {
+	case 0:
+		mxc_uart_device0.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device0);
+		break;
+	case 1:
+		mxc_uart_device1.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device1);
+		break;
+	case 2:
+		mxc_uart_device2.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device2);
+		break;
+	case 3:
+		mxc_uart_device3.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device3);
+		break;
+	case 4:
+		mxc_uart_device4.dev.platform_data = pdata;
+		platform_device_register(&mxc_uart_device4);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	[0] = {
+		.chip.label = "gpio-0",
+		.base = IO_ADDRESS(GPIO1_BASE_ADDR),
+		.irq = MXC_INT_GPIO1,
+		.virtual_irq_start = MXC_GPIO_INT_BASE
+	},
+	[1] = {
+		.chip.label = "gpio-1",
+		.base = IO_ADDRESS(GPIO2_BASE_ADDR),
+		.irq = MXC_INT_GPIO2,
+		.virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN
+	},
+	[2] = {
+		.chip.label = "gpio-2",
+		.base = IO_ADDRESS(GPIO3_BASE_ADDR),
+		.irq = MXC_INT_GPIO3,
+		.virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN * 2
+	}
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
new file mode 100644
index 000000000000..adc51feefc1d
--- /dev/null
+++ b/arch/arm/mach-mx3/iomux.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/iomux-mx3.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
+#define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
+#define IOMUXGPR	(IOMUX_BASE + 0x008)
+#define IOMUXSW_MUX_CTL	(IOMUX_BASE + 0x00C)
+#define IOMUXSW_PAD_CTL	(IOMUX_BASE + 0x154)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int pin_mode)
+{
+	u32 reg, field, l, mode, ret = 0;
+
+	reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
+	field = pin_mode & 0x3;
+	mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
+
+	pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n",
+			__func__, (pin_mode & IOMUX_REG_MASK), field, mode);
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0xff << (field * 8));
+	l |= mode << (field * 8);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+	u32 reg, field, l;
+
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3;
+	field = (pin + 2) % 3;
+
+	pr_debug("%s: reg offset = 0x%x field = %d\n",
+			__func__, (pin + 2) / 3, field);
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0x1ff << (field * 9));
+	l |= config << (field * 9);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
+{
+	u32 l;
+
+	spin_lock(&gpio_mux_lock);
+	l = __raw_readl(IOMUXGPR);
+	if (en)
+		l |= gp;
+	else
+		l &= ~gp;
+
+	__raw_writel(l, IOMUXGPR);
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_gpr);
+
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 7e89bdc23a9f..eba3e0cd4283 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -26,9 +26,11 @@
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <asm/arch/common.h>
+#include <asm/arch/board-mx31ads.h>
 
 /*!
  * @file mx31ads.c
@@ -126,6 +128,16 @@ static void __init mxc_board_init(void)
 	mxc_init_extuart();
 }
 
+static void __init mx31ads_timer_init(void)
+{
+	mxc_clocks_init(26000000);
+	mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer mx31ads_timer = {
+	.init	= mx31ads_timer_init,
+};
+
 /*
  * The following uses standard kernel macros defined in arch.h in order to
  * initialize __mach_desc_MX31ADS data structure.
@@ -138,5 +150,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	.map_io         = mx31ads_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
-	.timer          = &mxc_timer,
+	.timer          = &mx31ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
new file mode 100644
index 000000000000..1372c1a1fc3f
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -0,0 +1,107 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/arch/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/arch/board-mx31lite.h>
+
+/*
+ * This file contains the board-specific initialization routines.
+ */
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31lite_io_desc[] __initdata = {
+	{
+		.virtual = AIPS1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length = AIPS1_SIZE,
+		.type = MT_NONSHARED_DEVICE
+	}, {
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_NONSHARED_DEVICE
+	}, {
+		.virtual = AIPS2_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length = AIPS2_SIZE,
+		.type = MT_NONSHARED_DEVICE
+	}, {
+		.virtual = CS4_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
+		.length = CS4_SIZE,
+		.type = MT_DEVICE
+	}
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init mx31lite_map_io(void)
+{
+	mxc_map_io();
+	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+}
+
+static void __init mx31lite_timer_init(void)
+{
+	mxc_clocks_init(26000000);
+	mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer mx31lite_timer = {
+	.init	= mx31lite_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31LITE data structure.
+ */
+
+MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPS1_BASE_ADDR,
+	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx31lite_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx31lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
new file mode 100644
index 000000000000..a34ae6de266f
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -0,0 +1,130 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/arch/common.h>
+#include <asm/arch/imx-uart.h>
+#include <asm/arch/iomux-mx3.h>
+#include <asm/arch/board-pcm037.h>
+
+static struct physmap_flash_data pcm037_flash_data = {
+	.width  = 2,
+};
+
+static struct resource pcm037_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &pcm037_flash_data,
+	},
+	.resource = &pcm037_flash_resource,
+	.num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&pcm037_flash,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+	imx_init_uart(0, &uart_pdata);
+
+	mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
+	mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
+
+	imx_init_uart(2, &uart_pdata);
+}
+
+/*
+ * This structure defines static mappings for the pcm037 board.
+ */
+static struct map_desc pcm037_io_desc[] __initdata = {
+	{
+		.virtual	= AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length		= AIPS1_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length		= AIPS2_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init pcm037_map_io(void)
+{
+	mxc_map_io();
+	iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc));
+}
+
+static void __init pcm037_timer_init(void)
+{
+	mxc_clocks_init(26000000);
+	mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer pcm037_timer = {
+	.init	= pcm037_timer_init,
+};
+
+MACHINE_START(PCM037, "Phytec Phycore pcm037")
+	/* Maintainer: Pengutronix */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = pcm037_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &pcm037_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c
deleted file mode 100644
index fb565c98dbfb..000000000000
--- a/arch/arm/mach-mx3/time.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * System Timer Interrupt reconfigured to run in free-run mode.
- * Author: Vitaly Wool
- * Copyright 2004 MontaVista Software Inc.
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*!
- * @file time.c
- * @brief This file contains OS tick and wdog timer implementations.
- *
- * This file contains OS tick and wdog timer implementations.
- *
- * @ingroup Timers
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach/time.h>
-#include <asm/io.h>
-#include <asm/arch/common.h>
-
-/*!
- * This is the timer interrupt service routine to do required tasks.
- * It also services the WDOG timer at the frequency of twice per WDOG
- * timeout value. For example, if the WDOG's timeout value is 4 (2
- * seconds since the WDOG runs at 0.5Hz), it will be serviced once
- * every 2/2=1 second.
- *
- * @param  irq          GPT interrupt source number (not used)
- * @param  dev_id       this parameter is not used
- * @return always returns \b IRQ_HANDLED as defined in
- *         include/linux/interrupt.h.
- */
-static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
-{
-	unsigned int next_match;
-
-	if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) {
-		do {
-			timer_tick();
-			next_match = __raw_readl(MXC_GPT_GPTOCR1) + LATCH;
-			__raw_writel(GPTSR_OF1, MXC_GPT_GPTSR);
-			__raw_writel(next_match, MXC_GPT_GPTOCR1);
-		} while ((signed long)(next_match -
-				       __raw_readl(MXC_GPT_GPTCNT)) <= 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*!
- * This function is used to obtain the number of microseconds since the last
- * timer interrupt. Note that interrupts is disabled by do_gettimeofday().
- *
- * @return the number of microseconds since the last timer interrupt.
- */
-static unsigned long mxc_gettimeoffset(void)
-{
-	unsigned long ticks_to_match, elapsed, usec, tick_usec, i;
-
-	/* Get ticks before next timer match */
-	ticks_to_match =
-	    __raw_readl(MXC_GPT_GPTOCR1) - __raw_readl(MXC_GPT_GPTCNT);
-
-	/* We need elapsed ticks since last match */
-	elapsed = LATCH - ticks_to_match;
-
-	/* Now convert them to usec */
-	/* Insure no overflow when calculating the usec below */
-	for (i = 1, tick_usec = tick_nsec / 1000;; i *= 2) {
-		tick_usec /= i;
-		if ((0xFFFFFFFF / tick_usec) > elapsed)
-			break;
-	}
-	usec = (unsigned long)(elapsed * tick_usec) / (LATCH / i);
-
-	return usec;
-}
-
-/*!
- * The OS tick timer interrupt structure.
- */
-static struct irqaction timer_irq = {
-	.name = "MXC Timer Tick",
-	.flags = IRQF_DISABLED | IRQF_TIMER,
-	.handler = mxc_timer_interrupt
-};
-
-/*!
- * This function is used to initialize the GPT to produce an interrupt
- * based on HZ.  It is called by start_kernel() during system startup.
- */
-void __init mxc_init_time(void)
-{
-	u32 reg, v;
-	reg = __raw_readl(MXC_GPT_GPTCR);
-	reg &= ~GPTCR_ENABLE;
-	__raw_writel(reg, MXC_GPT_GPTCR);
-	reg |= GPTCR_SWR;
-	__raw_writel(reg, MXC_GPT_GPTCR);
-
-	while ((__raw_readl(MXC_GPT_GPTCR) & GPTCR_SWR) != 0)
-		cpu_relax();
-
-	reg = GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ;
-	__raw_writel(reg, MXC_GPT_GPTCR);
-
-	/* TODO: get timer rate from clk driver */
-	v = 66500000;
-
-	__raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR);
-
-	if ((v % CLOCK_TICK_RATE) != 0) {
-		pr_info("\nWARNING: Can't generate CLOCK_TICK_RATE at %d Hz\n",
-			CLOCK_TICK_RATE);
-	}
-	pr_info("Actual CLOCK_TICK_RATE is %d Hz\n",
-		v / ((__raw_readl(MXC_GPT_GPTPR) & 0xFFF) + 1));
-
-	reg = __raw_readl(MXC_GPT_GPTCNT);
-	reg += LATCH;
-	__raw_writel(reg, MXC_GPT_GPTOCR1);
-
-	setup_irq(MXC_INT_GPT, &timer_irq);
-
-	reg = __raw_readl(MXC_GPT_GPTCR);
-	reg =
-	    GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ | GPTCR_STOPEN | GPTCR_DOZEN |
-	    GPTCR_WAITEN | GPTCR_ENMOD | GPTCR_ENABLE;
-	__raw_writel(reg, MXC_GPT_GPTCR);
-
-	__raw_writel(GPTIR_OF1IE, MXC_GPT_GPTIR);
-}
-
-struct sys_timer mxc_timer = {
-	.init = mxc_init_time,
-	.offset = mxc_gettimeoffset,
-};
diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
index f8639161068f..44ed20d4a388 100644
--- a/arch/arm/mach-ns9xxx/clock.c
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/semaphore.h>
 
-#include <asm/semaphore.h>
 #include "clock.h"
 
 static LIST_HEAD(clocks);
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index c06f5254c0f3..1bda8f5d7546 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,9 @@
 #
 
 # Common support
-obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o
+
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index bcb984f2300f..3f39e0e79c9f 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/clk.h>
@@ -202,7 +203,7 @@ static struct omap_board_config_kernel nokia770_config[] __initdata = {
 #define	AMPLIFIER_CTRL_GPIO	58
 
 static struct clk *dspxor_ck;
-static DECLARE_MUTEX(audio_pwr_sem);
+static DEFINE_MUTEX(audio_pwr_lock);
 /*
  * audio_pwr_state
  * +--+-------------------------+---------------------------------------+
@@ -218,7 +219,7 @@ static DECLARE_MUTEX(audio_pwr_sem);
 static int audio_pwr_state = -1;
 
 /*
- * audio_pwr_up / down should be called under audio_pwr_sem
+ * audio_pwr_up / down should be called under audio_pwr_lock
  */
 static void nokia770_audio_pwr_up(void)
 {
@@ -237,11 +238,11 @@ static void nokia770_audio_pwr_up(void)
 
 static void codec_delayed_power_down(struct work_struct *work)
 {
-	down(&audio_pwr_sem);
+	mutex_lock(&audio_pwr_lock);
 	if (audio_pwr_state == -1)
 		aic23_power_down();
 	clk_disable(dspxor_ck);
-	up(&audio_pwr_sem);
+	mutex_unlock(&audio_pwr_lock);
 }
 
 static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down);
@@ -258,19 +259,19 @@ static void nokia770_audio_pwr_down(void)
 static int
 nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
 {
-	down(&audio_pwr_sem);
+	mutex_lock(&audio_pwr_lock);
 	if (audio_pwr_state == -1)
 		nokia770_audio_pwr_up();
 	/* force audio_pwr_state = 0, even if it was 1. */
 	audio_pwr_state = 0;
-	up(&audio_pwr_sem);
+	mutex_unlock(&audio_pwr_lock);
 	return 0;
 }
 
 static int
 nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
 {
-	down(&audio_pwr_sem);
+	mutex_lock(&audio_pwr_lock);
 	switch (stage) {
 	case 1:
 		if (audio_pwr_state == 0)
@@ -283,7 +284,7 @@ nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
 		}
 		break;
 	}
-	up(&audio_pwr_sem);
+	mutex_unlock(&audio_pwr_lock);
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a66505f58b15..845c66371ca3 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -267,13 +267,17 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 
 static void __init osk_init_smc91x(void)
 {
+	u32 l;
+
 	if ((gpio_request(0, "smc_irq")) < 0) {
 		printk("Error requesting gpio 0 for smc91x irq\n");
 		return;
 	}
 
 	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
-	EMIFS_CCS(1) |= 0x3;
+	l = omap_readl(EMIFS_CCS(1));
+	l |= 0x3;
+	omap_writel(l, EMIFS_CCS(1));
 }
 
 static void __init osk_init_cf(void)
@@ -526,20 +530,26 @@ static void __init osk_mistral_init(void) { }
 
 static void __init osk_init(void)
 {
+	u32 l;
+
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
 	 * wrong CS3 memory timings. This mainly leads to CRC
 	 * or similar errors if you use NOR flash (e.g. with JFFS2)
 	 */
-	if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
-		EMIFS_CCS(3) = EMIFS_CS3_VAL;
+	l = omap_readl(EMIFS_CCS(3));
+	if (l != EMIFS_CS3_VAL)
+		omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
 
 	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
 	osk_flash_resource.end += SZ_32M - 1;
 	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
 	omap_board_config = osk_config;
 	omap_board_config_size = ARRAY_SIZE(osk_config);
-	USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+
+	l = omap_readl(USB_TRANSCEIVER_CTRL);
+	l |= (3 << 1);
+	omap_writel(l, USB_TRANSCEIVER_CTRL);
 
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 30e188109046..0cf62ef5ecb7 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -32,7 +32,7 @@
 
 static void fpga_mask_irq(unsigned int irq)
 {
-	irq -= OMAP1510_IH_FPGA_BASE;
+	irq -= OMAP_FPGA_IRQ_BASE;
 
 	if (irq < 8)
 		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
@@ -65,7 +65,7 @@ static void fpga_ack_irq(unsigned int irq)
 
 static void fpga_unmask_irq(unsigned int irq)
 {
-	irq -= OMAP1510_IH_FPGA_BASE;
+	irq -= OMAP_FPGA_IRQ_BASE;
 
 	if (irq < 8)
 		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
@@ -95,8 +95,8 @@ void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
 	if (!stat)
 		return;
 
-	for (fpga_irq = OMAP1510_IH_FPGA_BASE;
-	     (fpga_irq < (OMAP1510_IH_FPGA_BASE + NR_FPGA_IRQS)) && stat;
+	for (fpga_irq = OMAP_FPGA_IRQ_BASE;
+	     (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
 	     fpga_irq++, stat >>= 1) {
 		if (stat & 1) {
 			d = irq_desc + fpga_irq;
@@ -151,7 +151,7 @@ void omap1510_fpga_init_irq(void)
 	__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
 	__raw_writeb(0, INNOVATOR_FPGA_IMR2);
 
-	for (i = OMAP1510_IH_FPGA_BASE; i < (OMAP1510_IH_FPGA_BASE + NR_FPGA_IRQS); i++) {
+	for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) {
 
 		if (i == OMAP1510_INT_FPGA_TS) {
 			/*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
new file mode 100644
index 000000000000..2d2c2522b048
--- /dev/null
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -0,0 +1,280 @@
+/*
+ * linux/arch/arm/mach-omap1/mcbsp.c
+ *
+ * Copyright (C) 2008 Instituto Nokia de Tecnologia
+ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/dsp_common.h>
+
+#define DPS_RSTCT2_PER_EN	(1 << 0)
+#define DSP_RSTCT2_WD_PER_EN	(1 << 1)
+
+struct mcbsp_internal_clk {
+	struct clk clk;
+	struct clk **childs;
+	int n_childs;
+};
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{
+	const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
+	int i;
+
+	mclk->n_childs = ARRAY_SIZE(clk_names);
+	mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
+				GFP_KERNEL);
+
+	for (i = 0; i < mclk->n_childs; i++) {
+		/* We fake a platform device to get correct device id */
+		struct platform_device pdev;
+
+		pdev.dev.bus = &platform_bus_type;
+		pdev.id = mclk->clk.id;
+		mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
+		if (IS_ERR(mclk->childs[i]))
+			printk(KERN_ERR "Could not get clock %s (%d).\n",
+				clk_names[i], mclk->clk.id);
+	}
+}
+
+static int omap_mcbsp_clk_enable(struct clk *clk)
+{
+	struct mcbsp_internal_clk *mclk = container_of(clk,
+					struct mcbsp_internal_clk, clk);
+	int i;
+
+	for (i = 0; i < mclk->n_childs; i++)
+		clk_enable(mclk->childs[i]);
+	return 0;
+}
+
+static void omap_mcbsp_clk_disable(struct clk *clk)
+{
+	struct mcbsp_internal_clk *mclk = container_of(clk,
+					struct mcbsp_internal_clk, clk);
+	int i;
+
+	for (i = 0; i < mclk->n_childs; i++)
+		clk_disable(mclk->childs[i]);
+}
+
+static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
+	{
+		.clk = {
+			.name 		= "mcbsp_clk",
+			.id		= 1,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+	{
+		.clk = {
+			.name 		= "mcbsp_clk",
+			.id		= 3,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+};
+
+#define omap_mcbsp_clks_size	ARRAY_SIZE(omap_mcbsp_clks)
+#else
+#define omap_mcbsp_clks_size	0
+static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
+static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{ }
+#endif
+
+static int omap1_mcbsp_check(unsigned int id)
+{
+	/* REVISIT: Check correctly for number of registered McBSPs */
+	if (cpu_is_omap730()) {
+		if (id > OMAP_MAX_MCBSP_COUNT - 2) {
+		       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
+				id + 1);
+		       return -ENODEV;
+		}
+		return 0;
+	}
+
+	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+		if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
+				id + 1);
+			return -ENODEV;
+		}
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static void omap1_mcbsp_request(unsigned int id)
+{
+	/*
+	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
+	 * are DSP public peripherals.
+	 */
+	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+		omap_dsp_request_mem();
+		/*
+		 * DSP external peripheral reset
+		 * FIXME: This should be moved to dsp code
+		 */
+		__raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
+				DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+	}
+}
+
+static void omap1_mcbsp_free(unsigned int id)
+{
+	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
+		omap_dsp_release_mem();
+}
+
+static struct omap_mcbsp_ops omap1_mcbsp_ops = {
+	.check		= omap1_mcbsp_check,
+	.request	= omap1_mcbsp_request,
+	.free		= omap1_mcbsp_free,
+};
+
+#ifdef CONFIG_ARCH_OMAP730
+static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
+	{
+		.virt_base	= io_p2v(OMAP730_MCBSP1_BASE),
+		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
+		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
+		.rx_irq		= INT_730_McBSP1RX,
+		.tx_irq		= INT_730_McBSP1TX,
+		.ops		= &omap1_mcbsp_ops,
+	},
+	{
+		.virt_base	= io_p2v(OMAP730_MCBSP2_BASE),
+		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
+		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
+		.rx_irq		= INT_730_McBSP2RX,
+		.tx_irq		= INT_730_McBSP2TX,
+		.ops		= &omap1_mcbsp_ops,
+	},
+};
+#define OMAP730_MCBSP_PDATA_SZ		ARRAY_SIZE(omap730_mcbsp_pdata)
+#else
+#define omap730_mcbsp_pdata		NULL
+#define OMAP730_MCBSP_PDATA_SZ		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
+	{
+		.virt_base	= OMAP1510_MCBSP1_BASE,
+		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
+		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
+		.rx_irq		= INT_McBSP1RX,
+		.tx_irq		= INT_McBSP1TX,
+		.ops		= &omap1_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+		},
+	{
+		.virt_base	= io_p2v(OMAP1510_MCBSP2_BASE),
+		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
+		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
+		.rx_irq		= INT_1510_SPI_RX,
+		.tx_irq		= INT_1510_SPI_TX,
+		.ops		= &omap1_mcbsp_ops,
+	},
+	{
+		.virt_base	= OMAP1510_MCBSP3_BASE,
+		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
+		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
+		.rx_irq		= INT_McBSP3RX,
+		.tx_irq		= INT_McBSP3TX,
+		.ops		= &omap1_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+};
+#define OMAP15XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap15xx_mcbsp_pdata)
+#else
+#define omap15xx_mcbsp_pdata		NULL
+#define OMAP15XX_MCBSP_PDATA_SZ		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
+	{
+		.virt_base	= OMAP1610_MCBSP1_BASE,
+		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
+		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
+		.rx_irq		= INT_McBSP1RX,
+		.tx_irq		= INT_McBSP1TX,
+		.ops		= &omap1_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.virt_base	= io_p2v(OMAP1610_MCBSP2_BASE),
+		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
+		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
+		.rx_irq		= INT_1610_McBSP2_RX,
+		.tx_irq		= INT_1610_McBSP2_TX,
+		.ops		= &omap1_mcbsp_ops,
+	},
+	{
+		.virt_base	= OMAP1610_MCBSP3_BASE,
+		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
+		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
+		.rx_irq		= INT_McBSP3RX,
+		.tx_irq		= INT_McBSP3TX,
+		.ops		= &omap1_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+};
+#define OMAP16XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap16xx_mcbsp_pdata)
+#else
+#define omap16xx_mcbsp_pdata		NULL
+#define OMAP16XX_MCBSP_PDATA_SZ		0
+#endif
+
+int __init omap1_mcbsp_init(void)
+{
+	int i;
+
+	for (i = 0; i < omap_mcbsp_clks_size; i++) {
+		if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+			omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
+			clk_register(&omap_mcbsp_clks[i].clk);
+		}
+	}
+
+	if (cpu_is_omap730())
+		omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
+						OMAP730_MCBSP_PDATA_SZ);
+
+	if (cpu_is_omap15xx())
+		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
+						OMAP15XX_MCBSP_PDATA_SZ);
+
+	if (cpu_is_omap16xx())
+		omap_mcbsp_register_board_cfg(omap16xx_mcbsp_pdata,
+						OMAP16XX_MCBSP_PDATA_SZ);
+
+	return omap_mcbsp_init();
+}
+
+arch_initcall(omap1_mcbsp_init);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index e6c64e10b7ec..742f79e73bd7 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -116,13 +116,6 @@ void omap_pm_idle(void)
 		return;
 	}
 
-	/*
-	 * Since an interrupt may set up a timer, we don't want to
-	 * reprogram the hardware timer with interrupts enabled.
-	 * Re-enable interrupts only after returning from idle.
-	 */
-	timer_dyn_reprogram();
-
 #ifdef CONFIG_OMAP_MPU_TIMER
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
 	use_idlect1 = use_idlect1 & ~(1 << 9);
diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/mach-omap1/sram.S
index 9e1813c77e05..126d252062d7 100644
--- a/arch/arm/plat-omap/sram-fn.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -18,7 +18,7 @@
 /*
  * Reprograms ULPD and CKCTL.
  */
-ENTRY(sram_reprogram_clock)
+ENTRY(omap1_sram_reprogram_clock)
 	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
 
 	mov	r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
@@ -53,5 +53,5 @@ lock:	ldrh	r4, [r2], #0			@ read back dpll value
 
 out:
 	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
-ENTRY(sram_reprogram_clock_sz)
-	.word	. - sram_reprogram_clock
+ENTRY(omap1_sram_reprogram_clock_sz)
+	.word	. - omap1_sram_reprogram_clock
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 2feb6870b735..93ee990618ef 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,15 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
 		devices.o serial.o gpmc.o timer-gp.o
 
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+
+# Functions loaded to SRAM
+obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
+
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ab9fc57d25f1..15675bce8012 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -41,6 +41,24 @@
 
 #define MAX_CLOCK_ENABLE_WAIT		100000
 
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER		1
+#define DPLL_MIN_DIVIDER		1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW		(1 << 0)
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR		64
+#define DPLL_SCALE_BASE			2
+#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
+					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
 u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
@@ -95,7 +113,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 {
 	long long dpll_clk;
 	u32 dpll_mult, dpll_div, dpll;
-	const struct dpll_data *dd;
+	struct dpll_data *dd;
 
 	dd = clk->dpll_data;
 	/* REVISIT: What do we return on error? */
@@ -603,7 +621,8 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 	clk->rate = clk->parent->rate / new_div;
 
 	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
-		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+		prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
+			OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
 		wmb();
 	}
 
@@ -723,6 +742,184 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	return 0;
 }
 
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
+ * @clk: struct clk * of the DPLL
+ * @tolerance: maximum rate error tolerance
+ *
+ * Set the maximum DPLL rate error tolerance for the rate rounding
+ * algorithm.  The rate tolerance is an attempt to balance DPLL power
+ * saving (the least divider value "n") vs. rate fidelity (the least
+ * difference between the desired DPLL target rate and the rounded
+ * rate out of the algorithm).  So, increasing the tolerance is likely
+ * to decrease DPLL power consumption and increase DPLL rate error.
+ * Returns -EINVAL if provided a null clock ptr or a clk that is not a
+ * DPLL; or 0 upon success.
+ */
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
+{
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	clk->dpll_data->rate_tolerance = tolerance;
+
+	return 0;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n)
+{
+	unsigned long long num;
+
+	num = (unsigned long long)parent_rate * m;
+	do_div(num, n);
+	return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL.  Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
+ * a non-scaled m upon return.  This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+			   unsigned long target_rate,
+			   unsigned long parent_rate)
+{
+	int flags = 0, carry = 0;
+
+	/* Unscale m and round if necessary */
+	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+		carry = 1;
+	*m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+	/*
+	 * The new rate must be <= the target rate to avoid programming
+	 * a rate that is impossible for the hardware to handle
+	 */
+	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+	if (*new_rate > target_rate) {
+		(*m)--;
+		*new_rate = 0;
+	}
+
+	/* Guard against m underflow */
+	if (*m < DPLL_MIN_MULTIPLIER) {
+		*m = DPLL_MIN_MULTIPLIER;
+		*new_rate = 0;
+		flags = DPLL_MULT_UNDERFLOW;
+	}
+
+	if (*new_rate == 0)
+		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+	return flags;
+}
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL, a desired target rate, and a rate tolerance, round
+ * the target rate to a possible, programmable rate for this DPLL.
+ * Rate tolerance is assumed to be set by the caller before this
+ * function is called.  Attempts to select the minimum possible n
+ * within the tolerance to reduce power consumption.  Stores the
+ * computed (m, n) in the DPLL's dpll_data structure so set_rate()
+ * will not need to call this (expensive) function again.  Returns ~0
+ * if the target rate cannot be rounded, either because the rate is
+ * too low or because the rate tolerance is set too tightly; or the
+ * rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+{
+	int m, n, r, e, scaled_max_m;
+	unsigned long scaled_rt_rp, new_rate;
+	int min_e = -1, min_e_m = -1, min_e_n = -1;
+
+	if (!clk || !clk->dpll_data)
+		return ~0;
+
+	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
+		 "%ld\n", clk->name, target_rate);
+
+	scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
+	scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR;
+
+	clk->dpll_data->last_rounded_rate = 0;
+
+	for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+
+		/* Compute the scaled DPLL multiplier, based on the divider */
+		m = scaled_rt_rp * n;
+
+		/*
+		 * Since we're counting n down, a m overflow means we can
+		 * can immediately skip to the next n
+		 */
+		if (m > scaled_max_m)
+			continue;
+
+		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+				    clk->parent->rate);
+
+		e = target_rate - new_rate;
+		pr_debug("clock: n = %d: m = %d: rate error is %d "
+			 "(new_rate = %ld)\n", n, m, e, new_rate);
+
+		if (min_e == -1 ||
+		    min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) {
+			min_e = e;
+			min_e_m = m;
+			min_e_n = n;
+
+			pr_debug("clock: found new least error %d\n", min_e);
+		}
+
+		/*
+		 * Since we're counting n down, a m underflow means we
+		 * can bail out completely (since as n decreases in
+		 * the next iteration, there's no way that m can
+		 * increase beyond the current m)
+		 */
+		if (r & DPLL_MULT_UNDERFLOW)
+			break;
+	}
+
+	if (min_e < 0) {
+		pr_debug("clock: error: target rate or tolerance too low\n");
+		return ~0;
+	}
+
+	clk->dpll_data->last_rounded_m = min_e_m;
+	clk->dpll_data->last_rounded_n = min_e_n;
+	clk->dpll_data->last_rounded_rate =
+		_dpll_compute_new_rate(clk->parent->rate, min_e_m,  min_e_n);
+
+	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
+		 min_e, min_e_m, min_e_n);
+	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
+		 clk->dpll_data->last_rounded_rate, target_rate);
+
+	return clk->dpll_data->last_rounded_rate;
+}
+
 /*-------------------------------------------------------------------------
  * Omap2 clock reset and init functions
  *-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d5980a9e09a4..3cd37cb57c5a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -18,11 +18,16 @@
 
 #include <asm/arch/clock.h>
 
+/* The maximum error between a target DPLL rate and the rounded rate in Hz */
+#define DEFAULT_DPLL_RATE_TOLERANCE	50000
+
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
+int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance);
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk);
@@ -42,6 +47,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
+void omap2_clk_prepare_for_reboot(void);
 
 extern u8 cpu_mask;
 
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index ece32d8acba4..aa567876651d 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -154,7 +154,7 @@ static void omap2_clk_fixed_disable(struct clk *clk)
  * Uses the current prcm set to tell if a rate is valid.
  * You can go slower, but not faster within a given rate set.
  */
-static u32 omap2_dpll_round_rate(unsigned long target_rate)
+long omap2_dpllcore_round_rate(unsigned long target_rate)
 {
 	u32 high, low, core_clk_src;
 
@@ -183,14 +183,14 @@ static u32 omap2_dpll_round_rate(unsigned long target_rate)
 
 }
 
-static void omap2_dpll_recalc(struct clk *clk)
+static void omap2_dpllcore_recalc(struct clk *clk)
 {
 	clk->rate = omap2_get_dpll_rate_24xx(clk);
 
 	propagate_rate(clk);
 }
 
-static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
+static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 {
 	u32 cur_rate, low, mult, div, valid_rate, done_rate;
 	u32 bypass = 0;
@@ -209,7 +209,7 @@ static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
 	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
 		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
 	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpll_round_rate(rate);
+		valid_rate = omap2_dpllcore_round_rate(rate);
 		if (valid_rate != rate)
 			goto dpll_exit;
 
@@ -256,7 +256,7 @@ static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
 		omap2_init_memory_params(omap2_dll_force_needed());
 		omap2_reprogram_sdrc(done_rate, 0);
 	}
-	omap2_dpll_recalc(&dpll_ck);
+	omap2_dpllcore_recalc(&dpll_ck);
 	ret = 0;
 
 dpll_exit:
@@ -383,7 +383,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 		local_irq_restore(flags);
 	}
-	omap2_dpll_recalc(&dpll_ck);
+	omap2_dpllcore_recalc(&dpll_ck);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88081ed13f96..be4e25554e05 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -30,12 +30,12 @@ static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
 static void omap2_sys_clk_recalc(struct clk *clk);
 static void omap2_osc_clk_recalc(struct clk *clk);
 static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_dpll_recalc(struct clk *clk);
+static void omap2_dpllcore_recalc(struct clk *clk);
 static int omap2_clk_fixed_enable(struct clk *clk);
 static void omap2_clk_fixed_disable(struct clk *clk);
 static int omap2_enable_osc_ck(struct clk *clk);
 static void omap2_disable_osc_ck(struct clk *clk);
-static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate);
+static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
 
 /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
@@ -665,20 +665,27 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
  * deal with this
  */
 
-static const struct dpll_data dpll_dd = {
+static struct dpll_data dpll_dd = {
 	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
 	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+	.max_multiplier		= 1024,
+	.max_divider		= 16,
+	.rate_tolerance		= DEFAULT_DPLL_RATE_TOLERANCE
 };
 
+/*
+ * XXX Cannot add round_rate here yet, as this is still a composite clock,
+ * not just a DPLL
+ */
 static struct clk dpll_ck = {
 	.name		= "dpll_ck",
 	.parent		= &sys_ck,		/* Can be func_32k also */
 	.dpll_data	= &dpll_dd,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES | ALWAYS_ENABLED,
-	.recalc		= &omap2_dpll_recalc,
-	.set_rate	= &omap2_reprogram_dpll,
+	.recalc		= &omap2_dpllcore_recalc,
+	.set_rate	= &omap2_reprogram_dpllcore,
 };
 
 static struct clk apll96_ck = {
@@ -1747,7 +1754,8 @@ static struct clk gpt12_fck = {
 };
 
 static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
+	.name		= "mcbsp_ick",
+	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1756,7 +1764,8 @@ static struct clk mcbsp1_ick = {
 };
 
 static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
+	.name		= "mcbsp_fck",
+	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1765,7 +1774,8 @@ static struct clk mcbsp1_fck = {
 };
 
 static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
+	.name		= "mcbsp_ick",
+	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1774,7 +1784,8 @@ static struct clk mcbsp2_ick = {
 };
 
 static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
+	.name		= "mcbsp_fck",
+	.id		= 2,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1783,7 +1794,8 @@ static struct clk mcbsp2_fck = {
 };
 
 static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
+	.name		= "mcbsp_ick",
+	.id		= 3,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1792,7 +1804,8 @@ static struct clk mcbsp3_ick = {
 };
 
 static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
+	.name		= "mcbsp_fck",
+	.id		= 3,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1801,7 +1814,8 @@ static struct clk mcbsp3_fck = {
 };
 
 static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
+	.name		= "mcbsp_ick",
+	.id		= 4,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1810,7 +1824,8 @@ static struct clk mcbsp4_ick = {
 };
 
 static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
+	.name		= "mcbsp_fck",
+	.id		= 4,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1819,7 +1834,8 @@ static struct clk mcbsp4_fck = {
 };
 
 static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
+	.name		= "mcbsp_ick",
+	.id		= 5,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1828,7 +1844,8 @@ static struct clk mcbsp5_ick = {
 };
 
 static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
+	.name		= "mcbsp_fck",
+	.id		= 5,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index b42bdd6079a5..4263099b1ad3 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -1,10 +1,11 @@
 /*
  * OMAP3-specific clock framework functions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
  *
  * Parts of this code are based on code written by
  * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
@@ -23,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/limits.h>
 
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
@@ -37,8 +39,11 @@
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
-/* CM_CLKEN_PLL*.EN* bit values */
-#define DPLL_LOCKED		0x7
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE			0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
+
+#define MAX_DPLL_WAIT_TRIES		1000000
 
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
@@ -53,6 +58,290 @@ static void omap3_dpll_recalc(struct clk *clk)
 	propagate_rate(clk);
 }
 
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
+{
+	const struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+
+	cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
+			dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
+{
+	const struct dpll_data *dd;
+	int i = 0;
+	int ret = -EINVAL;
+	u32 idlest_mask;
+
+	dd = clk->dpll_data;
+
+	state <<= dd->idlest_bit;
+	idlest_mask = 1 << dd->idlest_bit;
+
+	while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+	       i < MAX_DPLL_WAIT_TRIES) {
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
+		       clk->name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk->name, (state) ? "locked" : "bypassed", i);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
+ * readiness before returning.  Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code.  If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk *clk)
+{
+	u8 ai;
+	int r;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	pr_debug("clock: locking DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+	if (ai) {
+		/*
+		 * If no downstream clocks are enabled, CM_IDLEST bit
+		 * may never become active, so don't wait for DPLL to lock.
+		 */
+		r = 0;
+		omap3_dpll_allow_idle(clk);
+	} else {
+		r = _omap3_wait_dpll_status(clk, 1);
+		omap3_dpll_deny_idle(clk);
+	};
+
+	return r;
+}
+
+/*
+ * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate.  Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code.  If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk *clk)
+{
+	int r;
+	u8 ai;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+		return -EINVAL;
+
+	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+		 clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+	r = _omap3_wait_dpll_status(clk, 0);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code.  If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk *clk)
+{
+	u8 ai;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+		return -EINVAL;
+
+	pr_debug("clock: stopping DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static int omap3_noncore_dpll_enable(struct clk *clk)
+{
+	int r;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	if (clk->parent->rate == clk_get_rate(clk))
+		r = _omap3_noncore_dpll_bypass(clk);
+	else
+		r = _omap3_noncore_dpll_lock(clk);
+
+	return r;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static void omap3_noncore_dpll_disable(struct clk *clk)
+{
+	if (clk == &dpll3_ck)
+		return;
+
+	_omap3_noncore_dpll_stop(clk);
+}
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	v = cm_read_reg(dd->autoidle_reg);
+	v &= dd->autoidle_mask;
+	v >>= __ffs(dd->autoidle_mask);
+
+	return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430.  The DPLL will enter low-power stop when its downstream
+ * clocks are gated.  No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	/*
+	 * REVISIT: CORE DPLL can optionally enter low-power bypass
+	 * by writing 0x5 instead of 0x1.  Add some mechanism to
+	 * optionally enter this mode.
+	 */
+	cm_rmw_reg_bits(dd->autoidle_mask,
+			DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
+			dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	cm_rmw_reg_bits(dd->autoidle_mask,
+			DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
+			dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
 /**
  * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
  * @clk: DPLL output struct clk
@@ -89,6 +378,8 @@ static void omap3_clkoutx2_recalc(struct clk *clk)
 		propagate_rate(clk);
 }
 
+/* Common clock code */
+
 /*
  * As it is structured now, this will prevent an OMAP2/3 multiboot
  * kernel from compiling.  This will need further attention.
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index c9c5972a2e25..05757eb032bc 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,14 +1,19 @@
 /*
  * OMAP3 clock framework
  *
- * Virtual clocks are introduced as a convenient tools.
- * They are sources for other clocks and not supposed
- * to be requested from drivers directly.
- *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * With many device clock fixes by Kevin Hilman and Jouni Högander
+ * DPLL bypass clock support added by Roman Tereshonkov
+ *
+ */
+
+/*
+ * Virtual clocks are introduced as convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
@@ -24,6 +29,15 @@
 
 static void omap3_dpll_recalc(struct clk *clk);
 static void omap3_clkoutx2_recalc(struct clk *clk);
+static void omap3_dpll_allow_idle(struct clk *clk);
+static void omap3_dpll_deny_idle(struct clk *clk);
+static u32 omap3_dpll_autoidle_read(struct clk *clk);
+static int omap3_noncore_dpll_enable(struct clk *clk);
+static void omap3_noncore_dpll_disable(struct clk *clk);
+
+/* Maximum DPLL multiplier, divider values for OMAP3 */
+#define OMAP3_MAX_DPLL_MULT		2048
+#define OMAP3_MAX_DPLL_DIV		128
 
 /*
  * DPLL1 supplies clock to the MPU.
@@ -33,6 +47,11 @@ static void omap3_clkoutx2_recalc(struct clk *clk);
  * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
  */
 
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP		0x1
+#define DPLL_LOW_POWER_BYPASS		0x5
+#define DPLL_LOCKED			0x7
+
 /* PRM CLOCKS */
 
 /* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
@@ -240,15 +259,23 @@ static const struct clksel_rate div16_dpll_rates[] = {
 /* DPLL1 */
 /* MPU clock source */
 /* Type: DPLL */
-static const struct dpll_data dpll1_dd = {
+static struct dpll_data dpll1_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_bit	= OMAP3430_ST_MPU_CLK_SHIFT,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll1_ck = {
@@ -256,6 +283,7 @@ static struct clk dpll1_ck = {
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll1_dd,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -297,22 +325,34 @@ static struct clk dpll1_x2m2_ck = {
 /* IVA2 clock source */
 /* Type: DPLL */
 
-static const struct dpll_data dpll2_dd = {
+static struct dpll_data dpll2_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
+				(1 << DPLL_LOW_POWER_BYPASS),
 	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_bit	= OMAP3430_ST_IVA2_CLK_SHIFT,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll2_ck = {
 	.name		= "dpll2_ck",
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll2_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -338,10 +378,12 @@ static struct clk dpll2_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/* DPLL3 */
-/* Source clock for all interfaces and for some device fclks */
-/* Type: DPLL */
-static const struct dpll_data dpll3_dd = {
+/*
+ * DPLL3
+ * Source clock for all interfaces and for some device fclks
+ * REVISIT: Also supports fast relock bypass - not included below
+ */
+static struct dpll_data dpll3_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
@@ -350,6 +392,11 @@ static const struct dpll_data dpll3_dd = {
 	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll3_ck = {
@@ -357,6 +404,7 @@ static struct clk dpll3_ck = {
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll3_dd,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -439,7 +487,7 @@ static struct clk core_ck = {
 	.name		= "core_ck",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= core_ck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -456,7 +504,7 @@ static struct clk dpll3_m2x2_ck = {
 	.name		= "dpll3_m2x2_ck",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= dpll3_m2x2_ck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -503,7 +551,7 @@ static struct clk emu_core_alwon_ck = {
 	.parent		= &dpll3_m3x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= emu_core_alwon_ck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -513,22 +561,33 @@ static struct clk emu_core_alwon_ck = {
 /* DPLL4 */
 /* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
 /* Type: DPLL */
-static const struct dpll_data dpll4_dd = {
+static struct dpll_data dpll4_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
 	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
 	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_bit	= OMAP3430_ST_PERIPH_CLK_SHIFT,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll4_ck = {
 	.name		= "dpll4_ck",
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll4_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -584,7 +643,7 @@ static struct clk omap_96m_alwon_fck = {
 	.parent		= &dpll4_m2x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= omap_96m_alwon_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				 PARENT_CONTROLS_CLOCK,
@@ -610,7 +669,7 @@ static struct clk cm_96m_fck = {
 	.parent		= &dpll4_m2x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= cm_96m_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -652,7 +711,7 @@ static struct clk virt_omap_54m_fck = {
 	.parent		= &dpll4_m3x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= virt_omap_54m_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -804,23 +863,33 @@ static struct clk emu_per_alwon_ck = {
 /* Supplies 120MHz clock, USIM source clock */
 /* Type: DPLL */
 /* 3430ES2 only */
-static const struct dpll_data dpll5_dd = {
+static struct dpll_data dpll5_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
 	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
 	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
 	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
+	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.idlest_bit	= OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll5_ck = {
 	.name		= "dpll5_ck",
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll5_dd,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -1365,7 +1434,8 @@ static const struct clksel mcbsp_15_clksel[] = {
 };
 
 static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
+	.name		= "mcbsp_fck",
+	.id		= 5,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
@@ -1377,7 +1447,8 @@ static struct clk mcbsp5_fck = {
 };
 
 static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
+	.name		= "mcbsp_fck",
+	.id		= 1,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
@@ -1789,7 +1860,8 @@ static struct clk gpt10_ick = {
 };
 
 static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
+	.name		= "mcbsp_ick",
+	.id		= 5,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
@@ -1798,7 +1870,8 @@ static struct clk mcbsp5_ick = {
 };
 
 static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
+	.name		= "mcbsp_ick",
+	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
@@ -1935,7 +2008,7 @@ static struct clk dss1_alwon_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= dss1_alwon_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &omap2_clksel_recalc,
@@ -1991,7 +2064,7 @@ static struct clk cam_mclk = {
 	.parent		= &dpll4_m5x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= cam_mclk_clksel,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
@@ -2541,7 +2614,8 @@ static struct clk gpt2_ick = {
 };
 
 static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
+	.name		= "mcbsp_ick",
+	.id		= 2,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
@@ -2550,7 +2624,8 @@ static struct clk mcbsp2_ick = {
 };
 
 static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
+	.name		= "mcbsp_ick",
+	.id		= 3,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
@@ -2559,7 +2634,8 @@ static struct clk mcbsp3_ick = {
 };
 
 static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
+	.name		= "mcbsp_ick",
+	.id		= 4,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
@@ -2574,7 +2650,8 @@ static const struct clksel mcbsp_234_clksel[] = {
 };
 
 static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
+	.name		= "mcbsp_fck",
+	.id		= 2,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
@@ -2586,7 +2663,8 @@ static struct clk mcbsp2_fck = {
 };
 
 static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
+	.name		= "mcbsp_fck",
+	.id		= 3,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
@@ -2598,7 +2676,8 @@ static struct clk mcbsp3_fck = {
 };
 
 static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
+	.name		= "mcbsp_fck",
+	.id		= 4,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 3c38395f6442..ee4c0ca1a708 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -72,7 +72,8 @@
 #define OMAP3430_ST_IVA2				(1 << 0)
 
 /* CM_IDLEST_PLL_IVA2 */
-#define OMAP3430_ST_IVA2_CLK				(1 << 0)
+#define OMAP3430_ST_IVA2_CLK_SHIFT			0
+#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
 
 /* CM_AUTOIDLE_PLL_IVA2 */
 #define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
@@ -115,10 +116,7 @@
 #define OMAP3430_ST_MPU					(1 << 0)
 
 /* CM_IDLEST_PLL_MPU */
-#define OMAP3430_ST_MPU_CLK				(1 << 0)
-#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
-
-/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK_SHIFT			0
 #define OMAP3430_ST_MPU_CLK_MASK			(1 << 0)
 
 /* CM_AUTOIDLE_PLL_MPU */
@@ -408,8 +406,10 @@
 #define OMAP3430_ST_12M_CLK				(1 << 4)
 #define OMAP3430_ST_48M_CLK				(1 << 3)
 #define OMAP3430_ST_96M_CLK				(1 << 2)
-#define OMAP3430_ST_PERIPH_CLK				(1 << 1)
-#define OMAP3430_ST_CORE_CLK				(1 << 0)
+#define OMAP3430_ST_PERIPH_CLK_SHIFT			1
+#define OMAP3430_ST_PERIPH_CLK_MASK			(1 << 1)
+#define OMAP3430_ST_CORE_CLK_SHIFT			0
+#define OMAP3430_ST_CORE_CLK_MASK			(1 << 0)
 
 /* CM_IDLEST2_CKGEN */
 #define OMAP3430ES2_ST_120M_CLK_SHIFT			1
@@ -423,6 +423,10 @@
 #define OMAP3430_AUTO_CORE_DPLL_SHIFT			0
 #define OMAP3430_AUTO_CORE_DPLL_MASK			(0x7 << 0)
 
+/* CM_AUTOIDLE2_PLL */
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT		0
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK		(0x7 << 0)
+
 /* CM_CLKSEL1_PLL */
 /* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
 #define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT		27
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 8489f3029fed..87a44c715aa4 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -81,6 +81,7 @@
 #define OMAP3430ES2_CM_FCLKEN3				0x0008
 #define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
 #define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL			CM_AUTOIDLE2
 #define OMAP3430_CM_CLKSEL1				CM_CLKSEL
 #define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
 #define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
@@ -96,15 +97,21 @@
 /* Clock management domain register get/set */
 
 #ifndef __ASSEMBLER__
-static inline void cm_write_mod_reg(u32 val, s16 module, s16 idx)
+
+extern u32 cm_read_mod_reg(s16 module, u16 idx);
+extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+
+static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-	__raw_writel(val, OMAP_CM_REGADDR(module, idx));
+	return cm_rmw_mod_reg_bits(bits, bits, module, idx);
 }
 
-static inline u32 cm_read_mod_reg(s16 module, s16 idx)
+static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-	return __raw_readl(OMAP_CM_REGADDR(module, idx));
+	return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
+
 #endif
 
 /* CM register bits shared between 24XX and 3430 */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index a5d86a49c213..51f70300996f 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -13,22 +13,21 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
-
+#include <asm/arch/common.h>
 #include <asm/arch/control.h>
 
-static u32 omap2_ctrl_base;
+static void __iomem *omap2_ctrl_base;
 
-#define OMAP_CTRL_REGADDR(reg)	(void __iomem *)IO_ADDRESS(omap2_ctrl_base \
-								+ (reg))
+#define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
 
-void omap_ctrl_base_set(u32 base)
+void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 {
-	omap2_ctrl_base = base;
+	omap2_ctrl_base = omap2_globals->ctrl;
 }
 
-u32 omap_ctrl_base_get(void)
+void __iomem *omap_ctrl_base_get(void)
 {
 	return omap2_ctrl_base;
 }
@@ -50,25 +49,16 @@ u32 omap_ctrl_readl(u16 offset)
 
 void omap_ctrl_writeb(u8 val, u16 offset)
 {
-	pr_debug("omap_ctrl_writeb: writing 0x%0x to 0x%0x\n", val,
-		 (u32)OMAP_CTRL_REGADDR(offset));
-
 	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writew(u16 val, u16 offset)
 {
-	pr_debug("omap_ctrl_writew: writing 0x%0x to 0x%0x\n", val,
-		 (u32)OMAP_CTRL_REGADDR(offset));
-
 	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writel(u32 val, u16 offset)
 {
-	pr_debug("omap_ctrl_writel: writing 0x%0x to 0x%0x\n", val,
-		 (u32)OMAP_CTRL_REGADDR(offset));
-
 	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
 }
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 4dfd878d7968..dff4b16cead6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,16 +17,23 @@
 
 #include <asm/io.h>
 
-#if defined(CONFIG_ARCH_OMAP2420)
-#define OMAP24XX_TAP_BASE	io_p2v(0x48014000)
-#endif
+#include <asm/arch/control.h>
+#include <asm/arch/cpu.h>
 
-#if defined(CONFIG_ARCH_OMAP2430)
-#define OMAP24XX_TAP_BASE	io_p2v(0x4900A000)
+#if defined(CONFIG_ARCH_OMAP2420)
+#define TAP_BASE	io_p2v(0x48014000)
+#elif defined(CONFIG_ARCH_OMAP2430)
+#define TAP_BASE	io_p2v(0x4900A000)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define TAP_BASE	io_p2v(0x4830A000)
 #endif
 
 #define OMAP_TAP_IDCODE		0x0204
+#if defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP_TAP_PROD_ID	0x0210
+#else
 #define OMAP_TAP_PROD_ID	0x0208
+#endif
 
 #define OMAP_TAP_DIE_ID_0	0x0218
 #define OMAP_TAP_DIE_ID_1	0x021C
@@ -56,9 +63,134 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
 };
 
+static struct omap_chip_id omap_chip;
+
+/**
+ * omap_chip_is - test whether currently running OMAP matches a chip type
+ * @oc: omap_chip_t to test against
+ *
+ * Test whether the currently-running OMAP chip matches the supplied
+ * chip type 'oc'.  Returns 1 upon a match; 0 upon failure.
+ */
+int omap_chip_is(struct omap_chip_id oci)
+{
+	return (oci.oc & omap_chip.oc) ? 1 : 0;
+}
+EXPORT_SYMBOL(omap_chip_is);
+
 static u32 __init read_tap_reg(int reg)
 {
-	return __raw_readl(OMAP24XX_TAP_BASE + reg);
+	unsigned int regval = 0;
+	u32 cpuid;
+
+	/* Reading the IDCODE register on 3430 ES1 results in a
+	 * data abort as the register is not exposed on the OCP
+	 * Hence reading the Cortex Rev
+	 */
+	cpuid = read_cpuid(CPUID_ID);
+
+	/* If the processor type is Cortex-A8 and the revision is 0x0
+	 * it means its Cortex r0p0 which is 3430 ES1
+	 */
+	if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
+		switch (reg) {
+		case OMAP_TAP_IDCODE  : regval = 0x0B7AE02F; break;
+		/* Making DevType as 0xF in ES1 to differ from ES2 */
+		case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
+		case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
+		case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
+		case OMAP_TAP_DIE_ID_2:	regval = 0x00000000; break;
+		case OMAP_TAP_DIE_ID_3:	regval = 0x2d2c0000; break;
+		}
+	} else
+		regval = __raw_readl(TAP_BASE + reg);
+
+	return regval;
+
+}
+
+/*
+ * _set_system_rev - set the system_rev global based on current OMAP chip type
+ *
+ * Set the system_rev global.  This is primarily used by the cpu_is_omapxxxx()
+ * macros.
+ */
+static void __init _set_system_rev(u32 type, u8 rev)
+{
+	u32 i, ctrl_status;
+
+	/*
+	 * system_rev encoding is as follows
+	 * system_rev & 0xff000000 -> Omap Class (24xx/34xx)
+	 * system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
+	 * system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
+	 * system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
+	 * system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
+	 * system_rev & 0x000000c0 -> IDCODE revision[6:7]
+	 * system_rev & 0x0000003f -> sys_boot[0:5]
+	 */
+	/* Embedding the ES revision info in type field */
+	system_rev = type;
+	/* Also add IDCODE revision info only two lower bits */
+	system_rev |= ((rev & 0x3) << 6);
+
+	/* Add in the device type and sys_boot fields (see above) */
+	if (cpu_is_omap24xx()) {
+		i = OMAP24XX_CONTROL_STATUS;
+	} else if (cpu_is_omap343x()) {
+		i = OMAP343X_CONTROL_STATUS;
+	} else {
+		printk(KERN_ERR "id: unknown CPU type\n");
+		BUG();
+	}
+	ctrl_status = omap_ctrl_readl(i);
+	system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
+				      OMAP2_SYSBOOT_4_MASK |
+				      OMAP2_SYSBOOT_3_MASK |
+				      OMAP2_SYSBOOT_2_MASK |
+				      OMAP2_SYSBOOT_1_MASK |
+				      OMAP2_SYSBOOT_0_MASK));
+	system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
+}
+
+
+/*
+ * _set_omap_chip - set the omap_chip global based on OMAP chip type
+ *
+ * Build the omap_chip bits.  This variable is used by powerdomain and
+ * clockdomain code to indicate whether structures are applicable for
+ * the current OMAP chip type by ANDing it against a 'platform' bitfield
+ * in the structure.
+ */
+static void __init _set_omap_chip(void)
+{
+	if (cpu_is_omap343x()) {
+
+		omap_chip.oc = CHIP_IS_OMAP3430;
+		if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
+			omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+		else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
+			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+
+	} else if (cpu_is_omap243x()) {
+
+		/* Currently only supports 2430ES2.1 and 2430-all */
+		omap_chip.oc |= CHIP_IS_OMAP2430;
+
+	} else if (cpu_is_omap242x()) {
+
+		/* Currently only supports 2420ES2.1.1 and 2420-all */
+		omap_chip.oc |= CHIP_IS_OMAP2420;
+
+	} else {
+
+		/* Current CPU not supported by this code. */
+		printk(KERN_WARNING "OMAP chip type code does not yet support "
+		       "this CPU type.\n");
+		WARN_ON(1);
+
+	}
+
 }
 
 void __init omap2_check_revision(void)
@@ -76,21 +208,31 @@ void __init omap2_check_revision(void)
 	rev = (idcode >> 28) & 0x0f;
 	dev_type = (prod_id >> 16) & 0x0f;
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
-		idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
-	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n",
-		read_tap_reg(OMAP_TAP_DIE_ID_0));
-	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
-		read_tap_reg(OMAP_TAP_DIE_ID_1),
-	       (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
-	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n",
-		read_tap_reg(OMAP_TAP_DIE_ID_2));
-	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n",
-		read_tap_reg(OMAP_TAP_DIE_ID_3));
-	printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
-		prod_id, dev_type);
-#endif
+	pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
+		 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
+	pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n",
+		 read_tap_reg(OMAP_TAP_DIE_ID_0));
+	pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
+		 read_tap_reg(OMAP_TAP_DIE_ID_1),
+		 (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
+	pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n",
+		 read_tap_reg(OMAP_TAP_DIE_ID_2));
+	pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n",
+		 read_tap_reg(OMAP_TAP_DIE_ID_3));
+	pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
+		 prod_id, dev_type);
+
+	/*
+	 * Detection for 34xx ES2.0 and above can be done with just
+	 * hawkeye and rev. See TRM 1.5.2 Device Identification.
+	 * Note that rev cannot be used directly as ES1.0 uses value 0.
+	 */
+	if (hawkeye == 0xb7ae) {
+		system_rev = 0x34300000 | ((1 + rev) << 12);
+		pr_info("OMAP%04x ES2.%i\n", system_rev >> 16, rev);
+		_set_omap_chip();
+		return;
+	}
 
 	/* Check hawkeye ids */
 	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
@@ -114,16 +256,15 @@ void __init omap2_check_revision(void)
 				omap_ids[i].type >> 16);
 		j = i;
 	}
-	system_rev = omap_ids[j].type;
 
-	system_rev |= rev << 8;
+	_set_system_rev(omap_ids[j].type, rev);
 
-	/* Add the cpu class info (24xx) */
-	system_rev |= 0x24;
+	_set_omap_chip();
 
 	pr_info("OMAP%04x", system_rev >> 16);
 	if ((system_rev >> 8) & 0x0f)
-		printk("%x", (system_rev >> 8) & 0x0f);
-	printk("\n");
+		pr_info("ES%x", (system_rev >> 12) & 0xf);
+	pr_info("\n");
+
 }
 
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
new file mode 100644
index 000000000000..17cf199d1130
--- /dev/null
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -0,0 +1,208 @@
+/*
+ * linux/arch/arm/mach-omap2/mcbsp.c
+ *
+ * Copyright (C) 2008 Instituto Nokia de Tecnologia
+ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mcbsp.h>
+
+struct mcbsp_internal_clk {
+	struct clk clk;
+	struct clk **childs;
+	int n_childs;
+};
+
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{
+	const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
+	int i;
+
+	mclk->n_childs = ARRAY_SIZE(clk_names);
+	mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
+				GFP_KERNEL);
+
+	for (i = 0; i < mclk->n_childs; i++) {
+		/* We fake a platform device to get correct device id */
+		struct platform_device pdev;
+
+		pdev.dev.bus = &platform_bus_type;
+		pdev.id = mclk->clk.id;
+		mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
+		if (IS_ERR(mclk->childs[i]))
+			printk(KERN_ERR "Could not get clock %s (%d).\n",
+				clk_names[i], mclk->clk.id);
+	}
+}
+
+static int omap_mcbsp_clk_enable(struct clk *clk)
+{
+	struct mcbsp_internal_clk *mclk = container_of(clk,
+					struct mcbsp_internal_clk, clk);
+	int i;
+
+	for (i = 0; i < mclk->n_childs; i++)
+		clk_enable(mclk->childs[i]);
+	return 0;
+}
+
+static void omap_mcbsp_clk_disable(struct clk *clk)
+{
+	struct mcbsp_internal_clk *mclk = container_of(clk,
+					struct mcbsp_internal_clk, clk);
+	int i;
+
+	for (i = 0; i < mclk->n_childs; i++)
+		clk_disable(mclk->childs[i]);
+}
+
+static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
+	{
+		.clk = {
+			.name 		= "mcbsp_clk",
+			.id		= 1,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+	{
+		.clk = {
+			.name 		= "mcbsp_clk",
+			.id		= 2,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+};
+
+#define omap_mcbsp_clks_size	ARRAY_SIZE(omap_mcbsp_clks)
+#else
+#define omap_mcbsp_clks_size	0
+static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
+static inline void omap_mcbsp_clk_init(struct clk *clk)
+{ }
+#endif
+
+static void omap2_mcbsp2_mux_setup(void)
+{
+	omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
+	omap_cfg_reg(R14_24XX_MCBSP2_FSX);
+	omap_cfg_reg(W15_24XX_MCBSP2_DR);
+	omap_cfg_reg(V15_24XX_MCBSP2_DX);
+	omap_cfg_reg(V14_24XX_GPIO117);
+	/*
+	 * TODO: Need to add MUX settings for OMAP 2430 SDP
+	 */
+}
+
+static void omap2_mcbsp_request(unsigned int id)
+{
+	if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
+		omap2_mcbsp2_mux_setup();
+}
+
+static int omap2_mcbsp_check(unsigned int id)
+{
+	if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+		printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static struct omap_mcbsp_ops omap2_mcbsp_ops = {
+	.request	= omap2_mcbsp_request,
+	.check		= omap2_mcbsp_check,
+};
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
+	{
+		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
+		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
+		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+};
+#define OMAP24XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap24xx_mcbsp_pdata)
+#else
+#define omap24xx_mcbsp_pdata		NULL
+#define OMAP24XX_MCBSP_PDATA_SZ		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
+	{
+		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
+		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
+		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+};
+#define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
+#else
+#define omap34xx_mcbsp_pdata		NULL
+#define OMAP34XX_MCBSP_PDATA_SZ		0
+#endif
+
+int __init omap2_mcbsp_init(void)
+{
+	int i;
+
+	for (i = 0; i < omap_mcbsp_clks_size; i++) {
+		/* Once we call clk_get inside init, we do not register it */
+		omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
+		clk_register(&omap_mcbsp_clks[i].clk);
+	}
+
+	if (cpu_is_omap24xx())
+		omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
+						OMAP24XX_MCBSP_PDATA_SZ);
+
+	if (cpu_is_omap34xx())
+		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
+						OMAP34XX_MCBSP_PDATA_SZ);
+
+	return omap_mcbsp_init();
+}
+arch_initcall(omap2_mcbsp_init);
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 12479081881a..73cadb2c75cf 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,6 +24,7 @@
 
 #include <asm/io.h>
 
+#include <asm/arch/common.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
 
@@ -32,8 +33,8 @@
 #include "memory.h"
 #include "sdrc.h"
 
-unsigned long omap2_sdrc_base;
-unsigned long omap2_sms_base;
+void __iomem *omap2_sdrc_base;
+void __iomem *omap2_sms_base;
 
 static struct memory_timings mem_timings;
 static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
@@ -154,6 +155,12 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
 }
 
+void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
+{
+	omap2_sdrc_base = omap2_globals->sdrc;
+	omap2_sms_base = omap2_globals->sms;
+}
+
 /* turn on smart idle modes for SDRAM scheduler and controller */
 void __init omap2_init_memory(void)
 {
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 930770012a75..8f98b20f30a1 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -236,7 +236,7 @@ void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
 	warn = (orig != reg);
 	if (debug || warn)
 		printk(KERN_WARNING
-			"MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+			"MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n",
 			cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
 			orig, reg);
 }
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index aad781dcf1b1..d6c9de82ca0c 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -57,13 +57,6 @@ void omap2_pm_idle(void)
 		return;
 	}
 
-	/*
-	 * Since an interrupt may set up a timer, we don't want to
-	 * reprogram the hardware timer with interrupts enabled.
-	 * Re-enable interrupts only after returning from idle.
-	 */
-	timer_dyn_reprogram();
-
 	omap2_sram_idle();
 	local_fiq_enable();
 	local_irq_enable();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index cacb34086e35..54c32f482131 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -32,6 +32,7 @@
 
 
 /* Chip-specific module offsets */
+#define OMAP24XX_GR_MOD					OCP_MOD
 #define OMAP24XX_DSP_MOD				0x800
 
 #define OMAP2430_MDM_MOD				0xc00
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index b12f423b8595..fd92a80f38f2 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -16,16 +16,21 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
+#include <asm/arch/common.h>
+#include <asm/arch/prcm.h>
 
+#include "clock.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 
-extern void omap2_clk_prepare_for_reboot(void);
+static void __iomem *prm_base;
+static void __iomem *cm_base;
 
 u32 omap_prcm_get_reset_sources(void)
 {
+	/* XXX This presumably needs modification for 34XX */
 	return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f;
 }
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
@@ -33,11 +38,90 @@ EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 /* Resets clock rates and reboots the system. Only called from system.h */
 void omap_prcm_arch_reset(char mode)
 {
-	u32 wkup;
+	s16 prcm_offs;
 	omap2_clk_prepare_for_reboot();
 
-	if (cpu_is_omap24xx()) {
-		wkup = prm_read_mod_reg(WKUP_MOD, RM_RSTCTRL) | OMAP_RST_DPLL3;
-		prm_write_mod_reg(wkup, WKUP_MOD, RM_RSTCTRL);
-	}
+	if (cpu_is_omap24xx())
+		prcm_offs = WKUP_MOD;
+	else if (cpu_is_omap34xx())
+		prcm_offs = OMAP3430_GR_MOD;
+	else
+		WARN_ON(1);
+
+	prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL);
+}
+
+static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
+{
+	BUG_ON(!base);
+	return __raw_readl(base + module + reg);
+}
+
+static inline void __omap_prcm_write(u32 value, void __iomem *base,
+						s16 module, u16 reg)
+{
+	BUG_ON(!base);
+	__raw_writel(value, base + module + reg);
+}
+
+/* Read a register in a PRM module */
+u32 prm_read_mod_reg(s16 module, u16 idx)
+{
+	return __omap_prcm_read(prm_base, module, idx);
+}
+EXPORT_SYMBOL(prm_read_mod_reg);
+
+/* Write into a register in a PRM module */
+void prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	__omap_prcm_write(val, prm_base, module, idx);
+}
+EXPORT_SYMBOL(prm_write_mod_reg);
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+	u32 v;
+
+	v = prm_read_mod_reg(module, idx);
+	v &= ~mask;
+	v |= bits;
+	prm_write_mod_reg(v, module, idx);
+
+	return v;
+}
+EXPORT_SYMBOL(prm_rmw_mod_reg_bits);
+
+/* Read a register in a CM module */
+u32 cm_read_mod_reg(s16 module, u16 idx)
+{
+	return __omap_prcm_read(cm_base, module, idx);
+}
+EXPORT_SYMBOL(cm_read_mod_reg);
+
+/* Write into a register in a CM module */
+void cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	__omap_prcm_write(val, cm_base, module, idx);
+}
+EXPORT_SYMBOL(cm_write_mod_reg);
+
+/* Read-modify-write a register in a CM module. Caller must lock */
+u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+	u32 v;
+
+	v = cm_read_mod_reg(module, idx);
+	v &= ~mask;
+	v |= bits;
+	cm_write_mod_reg(v, module, idx);
+
+	return v;
+}
+EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
+
+void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
+{
+	prm_base = omap2_globals->prm;
+	cm_base = omap2_globals->cm;
 }
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 618f8111658a..bbf41fc8e9a9 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -38,13 +38,29 @@
  *
  */
 
+/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
+#define OMAP24XX_PRCM_VOLTCTRL_OFFSET		0x0050
+#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET	0x0080
+
+/* 242x GR_MOD registers, use these only for assembly code */
+#define OMAP242X_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
+						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP242X_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
+						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* 243x GR_MOD registers, use these only for assembly code */
+#define OMAP243X_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
+						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP243X_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
+						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* These will disappear */
 #define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
 #define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
 
 #define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
 #define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
 
-#define OMAP24XX_PRCM_VOLTCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0050)
 #define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
 #define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
 #define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
@@ -150,15 +166,19 @@
 #ifndef __ASSEMBLER__
 
 /* Power/reset management domain register get/set */
+extern u32 prm_read_mod_reg(s16 module, u16 idx);
+extern void prm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 
-static inline void prm_write_mod_reg(u32 val, s16 module, s16 idx)
+/* Read-modify-write bits in a PRM register (by domain) */
+static inline u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-	__raw_writel(val, OMAP_PRM_REGADDR(module, idx));
+	return prm_rmw_mod_reg_bits(bits, bits, module, idx);
 }
 
-static inline u32 prm_read_mod_reg(s16 module, s16 idx)
+static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-	return __raw_readl(OMAP_PRM_REGADDR(module, idx));
+	return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index d7f23bc9550a..1b1fe4f6e030 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -18,13 +18,11 @@
 #include <asm/arch/sdrc.h>
 
 #ifndef __ASSEMBLER__
-extern unsigned long omap2_sdrc_base;
-extern unsigned long omap2_sms_base;
+extern void __iomem *omap2_sdrc_base;
+extern void __iomem *omap2_sms_base;
 
-#define OMAP_SDRC_REGADDR(reg)						\
-		(void __iomem *)IO_ADDRESS(omap2_sdrc_base + (reg))
-#define OMAP_SMS_REGADDR(reg)						\
-		(void __iomem *)IO_ADDRESS(omap2_sms_base + (reg))
+#define OMAP_SDRC_REGADDR(reg)			(omap2_sdrc_base + (reg))
+#define OMAP_SMS_REGADDR(reg)			(omap2_sms_base + (reg))
 
 /* SDRC global register get/set */
 
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram242x.S
index 4a9e49140716..4c274510f3e9 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap2/sram-fn.S
+ * linux/arch/arm/mach-omap2/sram242x.S
  *
  * Omap2 specific functions that need to be run in internal SRAM
  *
@@ -27,22 +27,20 @@
 #include <asm/arch/io.h>
 #include <asm/hardware.h>
 
-#include "sdrc.h"
 #include "prm.h"
 #include "cm.h"
-
-#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+#include "sdrc.h"
 
 	.text
 
-ENTRY(sram_ddr_init)
+ENTRY(omap242x_sram_ddr_init)
 	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
 
 	mov	r12, r2			@ capture CS1 vs CS0
 	mov	r8, r3			@ capture force parameter
 
 	/* frequency shift down */
-	ldr	r2, cm_clksel2_pll	@ get address of dpllout reg
+	ldr	r2, omap242x_sdi_cm_clksel2_pll	@ get address of dpllout reg
 	mov	r3, #0x1		@ value for 1x operation
 	str	r3, [r2]		@ go to L1-freq operation
 
@@ -51,7 +49,7 @@ ENTRY(sram_ddr_init)
 	bl voltage_shift		@ go drop voltage
 
 	/* dll lock mode */
-	ldr	r11, sdrc_dlla_ctrl	@ addr of dlla ctrl
+	ldr	r11, omap242x_sdi_sdrc_dlla_ctrl	@ addr of dlla ctrl
 	ldr	r10, [r11]		@ get current val
 	cmp	r12, #0x1		@ cs1 base (2422 es2.05/1)
 	addeq	r11, r11, #0x8		@ if cs1 base, move to DLLB
@@ -102,7 +100,7 @@ i_dll_delay:
 	 * wait for it to finish, use 32k sync counter, 1tick=31uS.
 	 */
 voltage_shift:
-	ldr	r4, prcm_voltctrl	@ get addr of volt ctrl.
+	ldr	r4, omap242x_sdi_prcm_voltctrl	@ get addr of volt ctrl.
 	ldr	r5, [r4]		@ get value.
 	ldr	r6, prcm_mask_val	@ get value of mask
 	and	r5, r5, r6		@ apply mask to clear bits
@@ -112,7 +110,7 @@ voltage_shift:
 	orr	r5, r5, r3		@ build value for force
 	str	r5, [r4]		@ Force transition to L1
 
-	ldr	r3, timer_32ksynct_cr	@ get addr of counter
+	ldr	r3, omap242x_sdi_timer_32ksynct_cr	@ get addr of counter
 	ldr	r5, [r3]		@ get value
 	add	r5, r5, #0x3		@ give it at most 93uS
 volt_delay:
@@ -121,32 +119,31 @@ volt_delay:
 	bhi	volt_delay		@ not yet->branch
 	mov	pc, lr			@ back to caller.
 
-/* relative load constants */
-cm_clksel2_pll:
+omap242x_sdi_cm_clksel2_pll:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-sdrc_dlla_ctrl:
+omap242x_sdi_sdrc_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-prcm_voltctrl:
-	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_sdi_prcm_voltctrl:
+	.word OMAP242X_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
-timer_32ksynct_cr:
-	.word TIMER_32KSYNCT_CR_V
-ENTRY(sram_ddr_init_sz)
-	.word	. - sram_ddr_init
+omap242x_sdi_timer_32ksynct_cr:
+	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap242x_sram_ddr_init_sz)
+	.word	. - omap242x_sram_ddr_init
 
 /*
  * Reprograms memory timings.
  * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
  * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
  */
-ENTRY(sram_reprogram_sdrc)
+ENTRY(omap242x_sram_reprogram_sdrc)
 	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
 	mov	r3, #0x0		@ clear for mrc call
 	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, finish ARM SDR/DDR
 	nop
 	nop
-	ldr	r6, ddr_sdrc_rfr_ctrl	@ get addr of refresh reg
+	ldr	r6, omap242x_srs_sdrc_rfr_ctrl	@ get addr of refresh reg
 	ldr	r5, [r6]		@ get value
 	mov	r5, r5, lsr #8		@ isolate rfr field and drop burst
 
@@ -160,7 +157,7 @@ ENTRY(sram_reprogram_sdrc)
 	movne	r5, r5, lsl #1		@ mult by 2 if to full
 	mov	r5, r5, lsl #8		@ put rfr field back into place
 	add	r5, r5, #0x1		@ turn on burst of 1
-	ldr	r4, ddr_cm_clksel2_pll	@ get address of out reg
+	ldr	r4, omap242x_srs_cm_clksel2_pll	@ get address of out reg
 	ldr	r3, [r4]		@ get curr value
 	orr	r3, r3, #0x3
 	bic	r3, r3, #0x3		@ clear lower bits
@@ -181,7 +178,7 @@ ENTRY(sram_reprogram_sdrc)
 	bne	freq_out		@ leave if SDR, no DLL function
 
 	/* With DDR, we need to take care of the DLL for the frequency change */
-	ldr	r2, ddr_sdrc_dlla_ctrl	@ addr of dlla ctrl
+	ldr	r2, omap242x_srs_sdrc_dlla_ctrl	@ addr of dlla ctrl
 	str	r1, [r2]		@ write out new SDRC_DLLA_CTRL
 	add	r2, r2, #0x8		@ addr to SDRC_DLLB_CTRL
 	str	r1, [r2]		@ commit to SDRC_DLLB_CTRL
@@ -197,7 +194,7 @@ freq_out:
      *	wait for it to finish, use 32k sync counter, 1tick=31uS.
      */
 voltage_shift_c:
-	ldr	r10, ddr_prcm_voltctrl	@ get addr of volt ctrl
+	ldr	r10, omap242x_srs_prcm_voltctrl	@ get addr of volt ctrl
 	ldr	r8, [r10]		@ get value
 	ldr	r7, ddr_prcm_mask_val	@ get value of mask
 	and	r8, r8, r7		@ apply mask to clear bits
@@ -207,7 +204,7 @@ voltage_shift_c:
 	orr	r8, r8, r7		@ build value for force
 	str	r8, [r10]		@ Force transition to L1
 
-	ldr	r10, ddr_timer_32ksynct	@ get addr of counter
+	ldr	r10, omap242x_srs_timer_32ksynct	@ get addr of counter
 	ldr	r8, [r10]		@ get value
 	add	r8, r8, #0x2		@ give it at most 62uS (min 31+)
 volt_delay_c:
@@ -216,39 +213,39 @@ volt_delay_c:
 	bhi	volt_delay_c		@ not yet->branch
 	mov	pc, lr			@ back to caller
 
-ddr_cm_clksel2_pll:
+omap242x_srs_cm_clksel2_pll:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-ddr_sdrc_dlla_ctrl:
+omap242x_srs_sdrc_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-ddr_sdrc_rfr_ctrl:
+omap242x_srs_sdrc_rfr_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-ddr_prcm_voltctrl:
-	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_srs_prcm_voltctrl:
+	.word OMAP242X_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
-ddr_timer_32ksynct:
-	.word TIMER_32KSYNCT_CR_V
+omap242x_srs_timer_32ksynct:
+	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
 
-ENTRY(sram_reprogram_sdrc_sz)
-	.word	. - sram_reprogram_sdrc
+ENTRY(omap242x_sram_reprogram_sdrc_sz)
+	.word	. - omap242x_sram_reprogram_sdrc
 
 /*
  * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
  */
-ENTRY(sram_set_prcm)
+ENTRY(omap242x_sram_set_prcm)
 	stmfd	sp!, {r0-r12, lr}	@ regs to stack
 	adr	r4, pbegin		@ addr of preload start
 	adr	r8, pend		@ addr of preload end
 	mcrr	p15, 1, r8, r4, c12	@ preload into icache
 pbegin:
 	/* move into fast relock bypass */
-	ldr	r8, pll_ctl		@ get addr
+	ldr	r8, omap242x_ssp_pll_ctl	@ get addr
 	ldr	r5, [r8]		@ get val
 	mvn	r6, #0x3		@ clear mask
 	and	r5, r5, r6		@ clear field
 	orr	r7, r5, #0x2		@ fast relock val
 	str	r7, [r8]		@ go to fast relock
-	ldr	r4, pll_stat		@ addr of stat
+	ldr	r4, omap242x_ssp_pll_stat	@ addr of stat
 block:
 	/* wait for bypass */
 	ldr	r8, [r4]		@ stat value
@@ -257,10 +254,10 @@ block:
 	bne	block			@ loop if not
 
 	/* set new dpll dividers _after_ in bypass */
-	ldr	r4, pll_div		@ get addr
+	ldr	r4, omap242x_ssp_pll_div	@ get addr
 	str	r0, [r4]		@ set dpll ctrl val
 
-	ldr	r4, set_config		@ get addr
+	ldr	r4, omap242x_ssp_set_config	@ get addr
 	mov	r8, #1			@ valid cfg msk
 	str	r8, [r4]		@ make dividers take
 
@@ -274,8 +271,8 @@ wait_a_bit:
 	beq	pend			@ jump over dpll relock
 
 	/* relock DPLL with new vals */
-	ldr	r5, pll_stat		@ get addr
-	ldr	r4, pll_ctl		@ get addr
+	ldr	r5, omap242x_ssp_pll_stat	@ get addr
+	ldr	r4, omap242x_ssp_pll_ctl	@ get addr
 	orr	r8, r7, #0x3		@ val for lock dpll
 	str	r8, [r4]		@ set val
 	mov	r0, #1000		@ dead spin a bit
@@ -289,9 +286,9 @@ wait_lock:
 	bne	wait_lock		@ wait if not
 pend:
 	/* update memory timings & briefly lock dll */
-	ldr	r4, sdrc_rfr		@ get addr
+	ldr	r4, omap242x_ssp_sdrc_rfr	@ get addr
 	str	r1, [r4]		@ update refresh timing
-	ldr	r11, dlla_ctrl		@ get addr of DLLA ctrl
+	ldr	r11, omap242x_ssp_dlla_ctrl	@ get addr of DLLA ctrl
 	ldr	r10, [r11]		@ get current val
 	mvn	r9, #0x4		@ mask to get clear bit2
 	and	r10, r10, r9		@ clear bit2 for lock mode
@@ -307,18 +304,18 @@ wait_dll_lock:
 	nop
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
-set_config:
-	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80)
-pll_ctl:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1)
-pll_stat:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1)
-pll_div:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL)
-sdrc_rfr:
+omap242x_ssp_set_config:
+	.word OMAP242X_PRCM_CLKCFG_CTRL
+omap242x_ssp_pll_ctl:
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap242x_ssp_pll_stat:
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap242x_ssp_pll_div:
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap242x_ssp_sdrc_rfr:
 	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-dlla_ctrl:
+omap242x_ssp_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
-ENTRY(sram_set_prcm_sz)
-	.word	. - sram_set_prcm
+ENTRY(omap242x_sram_set_prcm_sz)
+	.word	. - omap242x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
new file mode 100644
index 000000000000..a3fa48dc08cd
--- /dev/null
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -0,0 +1,321 @@
+/*
+ * linux/arch/arm/mach-omap2/sram243x.S
+ *
+ * Omap2 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/hardware.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "sdrc.h"
+
+	.text
+
+ENTRY(omap243x_sram_ddr_init)
+	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
+
+	mov	r12, r2			@ capture CS1 vs CS0
+	mov	r8, r3			@ capture force parameter
+
+	/* frequency shift down */
+	ldr	r2, omap243x_sdi_cm_clksel2_pll	@ get address of dpllout reg
+	mov	r3, #0x1		@ value for 1x operation
+	str	r3, [r2]		@ go to L1-freq operation
+
+	/* voltage shift down */
+	mov r9, #0x1			@ set up for L1 voltage call
+	bl voltage_shift		@ go drop voltage
+
+	/* dll lock mode */
+	ldr	r11, omap243x_sdi_sdrc_dlla_ctrl	@ addr of dlla ctrl
+	ldr	r10, [r11]		@ get current val
+	cmp	r12, #0x1		@ cs1 base (2422 es2.05/1)
+	addeq	r11, r11, #0x8		@ if cs1 base, move to DLLB
+	mvn	r9, #0x4		@ mask to get clear bit2
+	and	r10, r10, r9		@ clear bit2 for lock mode.
+	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
+	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
+	str	r10, [r11]		@ commit to DLLA_CTRL
+	bl	i_dll_wait		@ wait for dll to lock
+
+	/* get dll value */
+	add	r11, r11, #0x4		@ get addr of status reg
+	ldr	r10, [r11]		@ get locked value
+
+	/* voltage shift up */
+	mov r9, #0x0			@ shift back to L0-voltage
+	bl voltage_shift		@ go raise voltage
+
+	/* frequency shift up */
+	mov	r3, #0x2		@ value for 2x operation
+	str	r3, [r2]		@ go to L0-freq operation
+
+	/* reset entry mode for dllctrl */
+	sub	r11, r11, #0x4		@ move from status to ctrl
+	cmp	r12, #0x1		@ normalize if cs1 based
+	subeq	r11, r11, #0x8		@ possibly back to DLLA
+	cmp	r8, #0x1		@ if forced unlock exit
+	orreq	r1, r1, #0x4		@ make sure exit with unlocked value
+	str	r1, [r11]		@ restore DLLA_CTRL high value
+	add	r11, r11, #0x8		@ move to DLLB_CTRL addr
+	str	r1, [r11]		@ set value DLLB_CTRL
+	bl	i_dll_wait		@ wait for possible lock
+
+	/* set up for return, DDR should be good */
+	str r10, [r0]			@ write dll_status and return counter
+	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
+
+	/* ensure the DLL has relocked */
+i_dll_wait:
+	mov	r4, #0x800		@ delay DLL relock, min 0x400 L3 clocks
+i_dll_delay:
+	subs	r4, r4, #0x1
+	bne	i_dll_delay
+	mov	pc, lr
+
+	/*
+	 * shift up or down voltage, use R9 as input to tell level.
+	 * wait for it to finish, use 32k sync counter, 1tick=31uS.
+	 */
+voltage_shift:
+	ldr	r4, omap243x_sdi_prcm_voltctrl	@ get addr of volt ctrl.
+	ldr	r5, [r4]		@ get value.
+	ldr	r6, prcm_mask_val	@ get value of mask
+	and	r5, r5, r6		@ apply mask to clear bits
+	orr	r5, r5, r9		@ bulld value for L0/L1-volt operation.
+	str	r5, [r4]		@ set up for change.
+	mov	r3, #0x4000		@ get val for force
+	orr	r5, r5, r3		@ build value for force
+	str	r5, [r4]		@ Force transition to L1
+
+	ldr	r3, omap243x_sdi_timer_32ksynct_cr	@ get addr of counter
+	ldr	r5, [r3]		@ get value
+	add	r5, r5, #0x3		@ give it at most 93uS
+volt_delay:
+	ldr	r7, [r3]		@ get timer value
+	cmp	r5, r7			@ time up?
+	bhi	volt_delay		@ not yet->branch
+	mov	pc, lr			@ back to caller.
+
+omap243x_sdi_cm_clksel2_pll:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_sdi_sdrc_dlla_ctrl:
+	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_sdi_prcm_voltctrl:
+	.word OMAP243X_PRCM_VOLTCTRL
+prcm_mask_val:
+	.word 0xFFFF3FFC
+omap243x_sdi_timer_32ksynct_cr:
+	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap243x_sram_ddr_init_sz)
+	.word	. - omap243x_sram_ddr_init
+
+/*
+ * Reprograms memory timings.
+ * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
+ * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
+ */
+ENTRY(omap243x_sram_reprogram_sdrc)
+	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
+	mov	r3, #0x0		@ clear for mrc call
+	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, finish ARM SDR/DDR
+	nop
+	nop
+	ldr	r6, omap243x_srs_sdrc_rfr_ctrl	@ get addr of refresh reg
+	ldr	r5, [r6]		@ get value
+	mov	r5, r5, lsr #8		@ isolate rfr field and drop burst
+
+	cmp	r0, #0x1		@ going to half speed?
+	movne	r9, #0x0		@ if up set flag up for pre up, hi volt
+
+	blne	voltage_shift_c		@ adjust voltage
+
+	cmp	r0, #0x1		@ going to half speed (post branch link)
+	moveq	r5, r5, lsr #1		@ divide by 2 if to half
+	movne	r5, r5, lsl #1		@ mult by 2 if to full
+	mov	r5, r5, lsl #8		@ put rfr field back into place
+	add	r5, r5, #0x1		@ turn on burst of 1
+	ldr	r4, omap243x_srs_cm_clksel2_pll	@ get address of out reg
+	ldr	r3, [r4]		@ get curr value
+	orr	r3, r3, #0x3
+	bic	r3, r3, #0x3		@ clear lower bits
+	orr	r3, r3, r0		@ new state value
+	str	r3, [r4]		@ set new state (pll/x, x=1 or 2)
+	nop
+	nop
+
+	moveq	r9, #0x1		@ if speed down, post down, drop volt
+	bleq	voltage_shift_c
+
+	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier
+	str	r5, [r6]		@ set new RFR_1 value
+	add	r6, r6, #0x30		@ get RFR_2 addr
+	str	r5, [r6]		@ set RFR_2
+	nop
+	cmp	r2, #0x1		@ (SDR or DDR) do we need to adjust DLL
+	bne	freq_out		@ leave if SDR, no DLL function
+
+	/* With DDR, we need to take care of the DLL for the frequency change */
+	ldr	r2, omap243x_srs_sdrc_dlla_ctrl	@ addr of dlla ctrl
+	str	r1, [r2]		@ write out new SDRC_DLLA_CTRL
+	add	r2, r2, #0x8		@ addr to SDRC_DLLB_CTRL
+	str	r1, [r2]		@ commit to SDRC_DLLB_CTRL
+	mov	r1, #0x2000		@ wait DLL relock, min 0x400 L3 clocks
+dll_wait:
+	subs	r1, r1, #0x1
+	bne	dll_wait
+freq_out:
+	ldmfd	sp!, {r0 - r10, pc}	@ restore regs and return
+
+    /*
+     * shift up or down voltage, use R9 as input to tell level.
+     *	wait for it to finish, use 32k sync counter, 1tick=31uS.
+     */
+voltage_shift_c:
+	ldr	r10, omap243x_srs_prcm_voltctrl	@ get addr of volt ctrl
+	ldr	r8, [r10]		@ get value
+	ldr	r7, ddr_prcm_mask_val	@ get value of mask
+	and	r8, r8, r7		@ apply mask to clear bits
+	orr	r8, r8, r9		@ bulld value for L0/L1-volt operation.
+	str	r8, [r10]		@ set up for change.
+	mov	r7, #0x4000		@ get val for force
+	orr	r8, r8, r7		@ build value for force
+	str	r8, [r10]		@ Force transition to L1
+
+	ldr	r10, omap243x_srs_timer_32ksynct	@ get addr of counter
+	ldr	r8, [r10]		@ get value
+	add	r8, r8, #0x2		@ give it at most 62uS (min 31+)
+volt_delay_c:
+	ldr	r7, [r10]		@ get timer value
+	cmp	r8, r7			@ time up?
+	bhi	volt_delay_c		@ not yet->branch
+	mov	pc, lr			@ back to caller
+
+omap243x_srs_cm_clksel2_pll:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_srs_sdrc_dlla_ctrl:
+	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_srs_sdrc_rfr_ctrl:
+	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_srs_prcm_voltctrl:
+	.word OMAP243X_PRCM_VOLTCTRL
+ddr_prcm_mask_val:
+	.word 0xFFFF3FFC
+omap243x_srs_timer_32ksynct:
+	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+
+ENTRY(omap243x_sram_reprogram_sdrc_sz)
+	.word	. - omap243x_sram_reprogram_sdrc
+
+/*
+ * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
+ */
+ENTRY(omap243x_sram_set_prcm)
+	stmfd	sp!, {r0-r12, lr}	@ regs to stack
+	adr	r4, pbegin		@ addr of preload start
+	adr	r8, pend		@ addr of preload end
+	mcrr	p15, 1, r8, r4, c12	@ preload into icache
+pbegin:
+	/* move into fast relock bypass */
+	ldr	r8, omap243x_ssp_pll_ctl	@ get addr
+	ldr	r5, [r8]		@ get val
+	mvn	r6, #0x3		@ clear mask
+	and	r5, r5, r6		@ clear field
+	orr	r7, r5, #0x2		@ fast relock val
+	str	r7, [r8]		@ go to fast relock
+	ldr	r4, omap243x_ssp_pll_stat	@ addr of stat
+block:
+	/* wait for bypass */
+	ldr	r8, [r4]		@ stat value
+	and	r8, r8, #0x3		@ mask for stat
+	cmp	r8, #0x1		@ there yet
+	bne	block			@ loop if not
+
+	/* set new dpll dividers _after_ in bypass */
+	ldr	r4, omap243x_ssp_pll_div	@ get addr
+	str	r0, [r4]		@ set dpll ctrl val
+
+	ldr	r4, omap243x_ssp_set_config	@ get addr
+	mov	r8, #1			@ valid cfg msk
+	str	r8, [r4]		@ make dividers take
+
+	mov	r4, #100		@ dead spin a bit
+wait_a_bit:
+	subs	r4, r4, #1		@ dec loop
+	bne	wait_a_bit		@ delay done?
+
+	/* check if staying in bypass */
+	cmp	r2, #0x1		@ stay in bypass?
+	beq	pend			@ jump over dpll relock
+
+	/* relock DPLL with new vals */
+	ldr	r5, omap243x_ssp_pll_stat	@ get addr
+	ldr	r4, omap243x_ssp_pll_ctl	@ get addr
+	orr	r8, r7, #0x3		@ val for lock dpll
+	str	r8, [r4]		@ set val
+	mov	r0, #1000		@ dead spin a bit
+wait_more:
+	subs	r0, r0, #1		@ dec loop
+	bne	wait_more		@ delay done?
+wait_lock:
+	ldr	r8, [r5]		@ get lock val
+	and	r8, r8, #3		@ isolate field
+	cmp	r8, #2			@ locked?
+	bne	wait_lock		@ wait if not
+pend:
+	/* update memory timings & briefly lock dll */
+	ldr	r4, omap243x_ssp_sdrc_rfr	@ get addr
+	str	r1, [r4]		@ update refresh timing
+	ldr	r11, omap243x_ssp_dlla_ctrl	@ get addr of DLLA ctrl
+	ldr	r10, [r11]		@ get current val
+	mvn	r9, #0x4		@ mask to get clear bit2
+	and	r10, r10, r9		@ clear bit2 for lock mode
+	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
+	str	r10, [r11]		@ commit to DLLA_CTRL
+	add	r11, r11, #0x8		@ move to dllb
+	str	r10, [r11]		@ hit DLLB also
+
+	mov	r4, #0x800		@ relock time (min 0x400 L3 clocks)
+wait_dll_lock:
+	subs	r4, r4, #0x1
+	bne	wait_dll_lock
+	nop
+	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
+
+omap243x_ssp_set_config:
+	.word OMAP243X_PRCM_CLKCFG_CTRL
+omap243x_ssp_pll_ctl:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap243x_ssp_pll_stat:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap243x_ssp_pll_div:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap243x_ssp_sdrc_rfr:
+	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_ssp_dlla_ctrl:
+	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+
+ENTRY(omap243x_sram_set_prcm_sz)
+	.word	. - omap243x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 78d05f203fff..557603f99313 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -59,8 +59,7 @@ static struct irqaction omap2_gp_timer_irq = {
 static int omap2_gp_timer_set_next_event(unsigned long cycles,
 					 struct clock_event_device *evt)
 {
-	omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles);
-	omap_dm_timer_start(gptimer);
+	omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles);
 
 	return 0;
 }
@@ -77,8 +76,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 		period -= 1;
 
-		omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period);
-		omap_dm_timer_start(gptimer);
+		omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		break;
@@ -172,8 +170,7 @@ static void __init omap2_gp_clocksource_init(void)
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
 	tick_period = (tick_rate / HZ) - 1;
 
-	omap_dm_timer_set_load(gpt, 1, 0);
-	omap_dm_timer_start(gpt);
+	omap_dm_timer_set_load_start(gpt, 1, 0);
 
 	clocksource_gpt.mult =
 		clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 93debf336155..ddcd41b15d17 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -44,6 +44,54 @@ config MACH_LINKSTATION_PRO
 	  Buffalo Linkstation Pro/Live platform. Both v1 and
 	  v2 devices are supported.
 
+config MACH_TS409
+	bool "QNAP TS-409"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-409 platform.
+
+config MACH_WRT350N_V2
+	bool "Linksys WRT350N v2"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Linksys WRT350N v2 platform.
+
+config MACH_TS78XX
+	bool "Technologic Systems TS-78xx"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Technologic Systems TS-78xx platform.
+
+config MACH_MV2120
+	bool "HP Media Vault mv2120"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  HP Media Vault mv2120 or mv5100.
+
+config MACH_MSS2
+	bool "Maxtor Shared Storage II"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Maxtor Shared Storage II platform.
+
+config MACH_WNR854T
+	bool "Netgear WNR854T"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Netgear WNR854T platform.
+
+config MACH_RD88F5181L_GE
+	bool "Marvell Orion-VoIP GE Reference Design"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Orion-VoIP GE (88F5181L) RD.
+
+config MACH_RD88F5181L_FXO
+	bool "Marvell Orion-VoIP FXO Reference Design"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Orion-VoIP FXO (88F5181L) RD.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 9301bf55910b..fcc48a8864f3 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,7 +1,15 @@
-obj-y				+= common.o addr-map.o pci.o gpio.o irq.o
+obj-y				+= common.o addr-map.o pci.o gpio.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
-obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o
+obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
+obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
+obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
+obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
+obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index e63fb05dc893..6f0dbda6c44c 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -70,6 +70,7 @@
 
 
 struct mbus_dram_target_info orion5x_mbus_dram_info;
+static int __initdata win_alloc_count;
 
 static int __init orion5x_cpu_win_can_remap(int win)
 {
@@ -87,16 +88,22 @@ static int __init orion5x_cpu_win_can_remap(int win)
 static void __init setup_cpu_win(int win, u32 base, u32 size,
 				 u8 target, u8 attr, int remap)
 {
-	orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000);
-	orion5x_write(CPU_WIN_CTRL(win),
-		((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1);
+	if (win >= 8) {
+		printk(KERN_ERR "setup_cpu_win: trying to allocate "
+				"window %d\n", win);
+		return;
+	}
+
+	writel(base & 0xffff0000, CPU_WIN_BASE(win));
+	writel(((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1,
+		CPU_WIN_CTRL(win));
 
 	if (orion5x_cpu_win_can_remap(win)) {
 		if (remap < 0)
 			remap = base;
 
-		orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
-		orion5x_write(CPU_WIN_REMAP_HI(win), 0);
+		writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
+		writel(0, CPU_WIN_REMAP_HI(win));
 	}
 }
 
@@ -109,11 +116,11 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
 	 * First, disable and clear windows.
 	 */
 	for (i = 0; i < 8; i++) {
-		orion5x_write(CPU_WIN_BASE(i), 0);
-		orion5x_write(CPU_WIN_CTRL(i), 0);
+		writel(0, CPU_WIN_BASE(i));
+		writel(0, CPU_WIN_CTRL(i));
 		if (orion5x_cpu_win_can_remap(i)) {
-			orion5x_write(CPU_WIN_REMAP_LO(i), 0);
-			orion5x_write(CPU_WIN_REMAP_HI(i), 0);
+			writel(0, CPU_WIN_REMAP_LO(i));
+			writel(0, CPU_WIN_REMAP_HI(i));
 		}
 	}
 
@@ -128,6 +135,7 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
 		TARGET_PCIE, ATTR_PCIE_MEM, -1);
 	setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
 		TARGET_PCI, ATTR_PCI_MEM, -1);
+	win_alloc_count = 4;
 
 	/*
 	 * Setup MBUS dram target info.
@@ -147,8 +155,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
 			w = &orion5x_mbus_dram_info.cs[cs++];
 			w->cs_index = i;
 			w->mbus_attr = 0xf & ~(1 << i);
-			w->base = base & 0xff000000;
-			w->size = (size | 0x00ffffff) + 1;
+			w->base = base & 0xffff0000;
+			w->size = (size | 0x0000ffff) + 1;
 		}
 	}
 	orion5x_mbus_dram_info.num_cs = cs;
@@ -156,25 +164,30 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
 
 void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
 {
-	setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+	setup_cpu_win(win_alloc_count++, base, size,
+		      TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
 }
 
 void __init orion5x_setup_dev0_win(u32 base, u32 size)
 {
-	setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
+	setup_cpu_win(win_alloc_count++, base, size,
+		      TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
 }
 
 void __init orion5x_setup_dev1_win(u32 base, u32 size)
 {
-	setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
+	setup_cpu_win(win_alloc_count++, base, size,
+		      TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
 }
 
 void __init orion5x_setup_dev2_win(u32 base, u32 size)
 {
-	setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
+	setup_cpu_win(win_alloc_count++, base, size,
+		      TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
 }
 
 void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 {
-	setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
+	setup_cpu_win(win_alloc_count++, base, size,
+		      TARGET_PCIE, ATTR_PCIE_WA, -1);
 }
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 4f13fd037f04..faf4e3211918 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -39,25 +39,22 @@ static struct map_desc orion5x_io_desc[] __initdata = {
 		.virtual	= ORION5X_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
 		.length		= ORION5X_REGS_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= ORION5X_PCIE_IO_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
 		.length		= ORION5X_PCIE_IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= ORION5X_PCI_IO_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
 		.length		= ORION5X_PCI_IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= ORION5X_PCIE_WA_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
 		.length		= ORION5X_PCIE_WA_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_DEVICE,
 	},
 };
 
@@ -66,101 +63,32 @@ void __init orion5x_map_io(void)
 	iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
 }
 
+
 /*****************************************************************************
- * UART
+ * EHCI
  ****************************************************************************/
-
-static struct resource orion5x_uart_resources[] = {
-	{
-		.start		= UART0_PHYS_BASE,
-		.end		= UART0_PHYS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_ORION5X_UART0,
-		.end		= IRQ_ORION5X_UART0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= UART1_PHYS_BASE,
-		.end		= UART1_PHYS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_ORION5X_UART1,
-		.end		= IRQ_ORION5X_UART1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct plat_serial8250_port orion5x_uart_data[] = {
-	{
-		.mapbase	= UART0_PHYS_BASE,
-		.membase	= (char *)UART0_VIRT_BASE,
-		.irq		= IRQ_ORION5X_UART0,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= ORION5X_TCLK,
-	},
-	{
-		.mapbase	= UART1_PHYS_BASE,
-		.membase	= (char *)UART1_VIRT_BASE,
-		.irq		= IRQ_ORION5X_UART1,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= ORION5X_TCLK,
-	},
-	{ },
+static struct orion_ehci_data orion5x_ehci_data = {
+	.dram		= &orion5x_mbus_dram_info,
 };
 
-static struct platform_device orion5x_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= orion5x_uart_data,
-	},
-	.resource		= orion5x_uart_resources,
-	.num_resources		= ARRAY_SIZE(orion5x_uart_resources),
-};
+static u64 ehci_dmamask = 0xffffffffUL;
 
-/*******************************************************************************
- * USB Controller - 2 interfaces
- ******************************************************************************/
 
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
 static struct resource orion5x_ehci0_resources[] = {
 	{
 		.start	= ORION5X_USB0_PHYS_BASE,
 		.end	= ORION5X_USB0_PHYS_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start	= IRQ_ORION5X_USB0_CTRL,
 		.end	= IRQ_ORION5X_USB0_CTRL,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct resource orion5x_ehci1_resources[] = {
-	{
-		.start	= ORION5X_USB1_PHYS_BASE,
-		.end	= ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_ORION5X_USB1_CTRL,
-		.end	= IRQ_ORION5X_USB1_CTRL,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct orion_ehci_data orion5x_ehci_data = {
-	.dram		= &orion5x_mbus_dram_info,
-};
-
-static u64 ehci_dmamask = 0xffffffffUL;
-
 static struct platform_device orion5x_ehci0 = {
 	.name		= "orion-ehci",
 	.id		= 0,
@@ -173,6 +101,27 @@ static struct platform_device orion5x_ehci0 = {
 	.num_resources	= ARRAY_SIZE(orion5x_ehci0_resources),
 };
 
+void __init orion5x_ehci0_init(void)
+{
+	platform_device_register(&orion5x_ehci0);
+}
+
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource orion5x_ehci1_resources[] = {
+	{
+		.start	= ORION5X_USB1_PHYS_BASE,
+		.end	= ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_ORION5X_USB1_CTRL,
+		.end	= IRQ_ORION5X_USB1_CTRL,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device orion5x_ehci1 = {
 	.name		= "orion-ehci",
 	.id		= 1,
@@ -185,11 +134,15 @@ static struct platform_device orion5x_ehci1 = {
 	.num_resources	= ARRAY_SIZE(orion5x_ehci1_resources),
 };
 
+void __init orion5x_ehci1_init(void)
+{
+	platform_device_register(&orion5x_ehci1);
+}
+
+
 /*****************************************************************************
- * Gigabit Ethernet port
- * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
+ * GigE
  ****************************************************************************/
-
 struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
 	.dram		= &orion5x_mbus_dram_info,
 	.t_clk		= ORION5X_TCLK,
@@ -219,7 +172,7 @@ static struct resource orion5x_eth_resources[] = {
 		.start	= IRQ_ORION5X_ETH_SUM,
 		.end	= IRQ_ORION5X_ETH_SUM,
 		.flags	= IORESOURCE_IRQ,
-	}
+	},
 };
 
 static struct platform_device orion5x_eth = {
@@ -238,11 +191,10 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 	platform_device_register(&orion5x_eth);
 }
 
+
 /*****************************************************************************
- * I2C controller
- * (The Orion and Discovery (MV643xx) families share the same I2C controller)
+ * I2C
  ****************************************************************************/
-
 static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
 	.freq_m		= 8, /* assumes 166 MHz TCLK */
 	.freq_n		= 3,
@@ -251,16 +203,15 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
 
 static struct resource orion5x_i2c_resources[] = {
 	{
-		.name   = "i2c base",
-		.start  = I2C_PHYS_BASE,
-		.end    = I2C_PHYS_BASE + 0x20 -1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "i2c irq",
-		.start  = IRQ_ORION5X_I2C,
-		.end    = IRQ_ORION5X_I2C,
-		.flags  = IORESOURCE_IRQ,
+		.name	= "i2c base",
+		.start	= I2C_PHYS_BASE,
+		.end	= I2C_PHYS_BASE + 0x1f,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "i2c irq",
+		.start	= IRQ_ORION5X_I2C,
+		.end	= IRQ_ORION5X_I2C,
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -270,36 +221,41 @@ static struct platform_device orion5x_i2c = {
 	.num_resources	= ARRAY_SIZE(orion5x_i2c_resources),
 	.resource	= orion5x_i2c_resources,
 	.dev		= {
-		.platform_data = &orion5x_i2c_pdata,
+		.platform_data	= &orion5x_i2c_pdata,
 	},
 };
 
+void __init orion5x_i2c_init(void)
+{
+	platform_device_register(&orion5x_i2c);
+}
+
+
 /*****************************************************************************
- * Sata port
+ * SATA
  ****************************************************************************/
 static struct resource orion5x_sata_resources[] = {
-        {
-                .name   = "sata base",
-                .start  = ORION5X_SATA_PHYS_BASE,
-                .end    = ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
-                .flags  = IORESOURCE_MEM,
-        },
 	{
-                .name   = "sata irq",
-                .start  = IRQ_ORION5X_SATA,
-                .end    = IRQ_ORION5X_SATA,
-                .flags  = IORESOURCE_IRQ,
-        },
+		.name	= "sata base",
+		.start	= ORION5X_SATA_PHYS_BASE,
+		.end	= ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "sata irq",
+		.start	= IRQ_ORION5X_SATA,
+		.end	= IRQ_ORION5X_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device orion5x_sata = {
-	.name           = "sata_mv",
-	.id             = 0,
+	.name		= "sata_mv",
+	.id		= 0,
 	.dev		= {
 		.coherent_dma_mask	= 0xffffffff,
 	},
-	.num_resources  = ARRAY_SIZE(orion5x_sata_resources),
-	.resource       = orion5x_sata_resources,
+	.num_resources	= ARRAY_SIZE(orion5x_sata_resources),
+	.resource	= orion5x_sata_resources,
 };
 
 void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
@@ -309,23 +265,111 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
 	platform_device_register(&orion5x_sata);
 }
 
+
 /*****************************************************************************
- * Time handling
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port orion5x_uart0_data[] = {
+	{
+		.mapbase	= UART0_PHYS_BASE,
+		.membase	= (char *)UART0_VIRT_BASE,
+		.irq		= IRQ_ORION5X_UART0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= ORION5X_TCLK,
+	}, {
+	},
+};
+
+static struct resource orion5x_uart0_resources[] = {
+	{
+		.start		= UART0_PHYS_BASE,
+		.end		= UART0_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_ORION5X_UART0,
+		.end		= IRQ_ORION5X_UART0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_uart0 = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= orion5x_uart0_data,
+	},
+	.resource		= orion5x_uart0_resources,
+	.num_resources		= ARRAY_SIZE(orion5x_uart0_resources),
+};
+
+void __init orion5x_uart0_init(void)
+{
+	platform_device_register(&orion5x_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
  ****************************************************************************/
+static struct plat_serial8250_port orion5x_uart1_data[] = {
+	{
+		.mapbase	= UART1_PHYS_BASE,
+		.membase	= (char *)UART1_VIRT_BASE,
+		.irq		= IRQ_ORION5X_UART1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= ORION5X_TCLK,
+	}, {
+	},
+};
+
+static struct resource orion5x_uart1_resources[] = {
+	{
+		.start		= UART1_PHYS_BASE,
+		.end		= UART1_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_ORION5X_UART1,
+		.end		= IRQ_ORION5X_UART1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_uart1 = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM1,
+	.dev			= {
+		.platform_data	= orion5x_uart1_data,
+	},
+	.resource		= orion5x_uart1_resources,
+	.num_resources		= ARRAY_SIZE(orion5x_uart1_resources),
+};
+
+void __init orion5x_uart1_init(void)
+{
+	platform_device_register(&orion5x_uart1);
+}
+
 
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
 static void orion5x_timer_init(void)
 {
 	orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
 }
 
 struct sys_timer orion5x_timer = {
-        .init = orion5x_timer_init,
+	.init = orion5x_timer_init,
 };
 
+
 /*****************************************************************************
  * General
  ****************************************************************************/
-
 /*
  * Identify device ID and rev from PCIe configuration header space '0'.
  */
@@ -350,8 +394,10 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
 	} else if (*dev == MV88F5181_DEV_ID) {
 		if (*rev == MV88F5181_REV_B1) {
 			*dev_name = "MV88F5181-Rev-B1";
+		} else if (*rev == MV88F5181L_REV_A1) {
+			*dev_name = "MV88F5181L-Rev-A1";
 		} else {
-			*dev_name = "MV88F5181-Rev-Unsupported";
+			*dev_name = "MV88F5181(L)-Rev-Unsupported";
 		}
 	} else {
 		*dev_name = "Device-Unknown";
@@ -370,15 +416,6 @@ void __init orion5x_init(void)
 	 * Setup Orion address map
 	 */
 	orion5x_setup_cpu_mbus_bridge();
-
-	/*
-	 * Register devices.
-	 */
-	platform_device_register(&orion5x_uart);
-	platform_device_register(&orion5x_ehci0);
-	if (dev == MV88F5182_DEV_ID)
-		platform_device_register(&orion5x_ehci1);
-	platform_device_register(&orion5x_i2c);
 }
 
 /*
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index bd0f05de6e18..f72cf0e77544 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -1,10 +1,12 @@
 #ifndef __ARCH_ORION5X_COMMON_H
 #define __ARCH_ORION5X_COMMON_H
 
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
 /*
  * Basic Orion init functions used early by machine-setup.
  */
-
 void orion5x_map_io(void);
 void orion5x_init_irq(void);
 void orion5x_init(void);
@@ -23,15 +25,22 @@ void orion5x_setup_dev1_win(u32 base, u32 size);
 void orion5x_setup_dev2_win(u32 base, u32 size);
 void orion5x_setup_pcie_wa_win(u32 base, u32 size);
 
+void orion5x_ehci0_init(void);
+void orion5x_ehci1_init(void);
+void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+void orion5x_i2c_init(void);
+void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+void orion5x_uart0_init(void);
+void orion5x_uart1_init(void);
+
 /*
- * Shared code used internally by other Orion core functions.
- * (/mach-orion/pci.c)
+ * PCIe/PCI functions.
  */
-
-struct pci_sys_data;
 struct pci_bus;
+struct pci_sys_data;
 
 void orion5x_pcie_id(u32 *dev, u32 *rev);
+void orion5x_pci_set_cardbus_mode(void);
 int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
 int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
@@ -40,26 +49,9 @@ int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
  * Valid GPIO pins according to MPP setup, used by machine-setup.
  * (/mach-orion/gpio.c).
  */
-
-void orion5x_gpio_set_valid_pins(u32 pins);
+void orion5x_gpio_set_valid(unsigned pin, int valid);
 void gpio_display(void);	/* debug */
 
-/*
- * Pull in Orion Ethernet platform_data, used by machine-setup
- */
-
-struct mv643xx_eth_platform_data;
-
-void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-
-/*
- * Orion Sata platform_data, used by machine-setup
- */
-
-struct mv_sata_platform_data;
-
-void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
-
 struct machine_desc;
 struct meminfo;
 struct tag;
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 44c64342dacb..88405e74e5e3 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -27,6 +27,7 @@
 #include <asm/arch/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
+#include "mpp.h"
 
 /*****************************************************************************
  * DB-88F5281 on board devices
@@ -86,7 +87,7 @@ static struct platform_device db88f5281_boot_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-		.platform_data = &db88f5281_boot_flash_data,
+		.platform_data	= &db88f5281_boot_flash_data,
 	},
 	.num_resources	= 1,
 	.resource	= &db88f5281_boot_flash_resource,
@@ -110,7 +111,7 @@ static struct platform_device db88f5281_nor_flash = {
 	.name		= "physmap-flash",
 	.id		= 1,
 	.dev		= {
-		.platform_data = &db88f5281_nor_flash_data,
+		.platform_data	= &db88f5281_nor_flash_data,
 	},
 	.num_resources	= 1,
 	.resource	= &db88f5281_nor_flash_resource,
@@ -125,18 +126,15 @@ static struct mtd_partition db88f5281_nand_parts[] = {
 		.name = "kernel",
 		.offset = 0,
 		.size = SZ_2M,
-	},
-	{
+	}, {
 		.name = "root",
 		.offset = SZ_2M,
 		.size = (SZ_16M - SZ_2M),
-	},
-	{
+	}, {
 		.name = "user",
 		.offset = SZ_16M,
 		.size = SZ_8M,
-	},
-	{
+	}, {
 		.name = "recovery",
 		.offset = (SZ_16M + SZ_8M),
 		.size = SZ_8M,
@@ -288,7 +286,6 @@ subsys_initcall(db88f5281_pci_init);
  ****************************************************************************/
 static struct mv643xx_eth_platform_data db88f5281_eth_data = {
 	.phy_addr	= 8,
-	.force_phy_addr = 1,
 };
 
 /*****************************************************************************
@@ -301,11 +298,28 @@ static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-
-static struct platform_device *db88f5281_devs[] __initdata = {
-	&db88f5281_boot_flash,
-	&db88f5281_nor_flash,
-	&db88f5281_nand_flash,
+static struct orion5x_mpp_mode db88f5281_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* USB Over Current */
+	{  1, MPP_GPIO },		/* USB Vbat input */
+	{  2, MPP_PCI_ARB },		/* PCI_REQn[2] */
+	{  3, MPP_PCI_ARB },		/* PCI_GNTn[2] */
+	{  4, MPP_PCI_ARB },		/* PCI_REQn[3] */
+	{  5, MPP_PCI_ARB },		/* PCI_GNTn[3] */
+	{  6, MPP_GPIO },		/* JP0, CON17.2 */
+	{  7, MPP_GPIO },		/* JP1, CON17.1 */
+	{  8, MPP_GPIO },		/* JP2, CON11.2 */
+	{  9, MPP_GPIO },		/* JP3, CON11.3 */
+	{ 10, MPP_GPIO },		/* RTC int */
+	{ 11, MPP_GPIO },		/* Baud Rate Generator */
+	{ 12, MPP_GPIO },		/* PCI int 1 */
+	{ 13, MPP_GPIO },		/* PCI int 2 */
+	{ 14, MPP_NAND },		/* NAND_REn[2] */
+	{ 15, MPP_NAND },		/* NAND_WEn[2] */
+	{ 16, MPP_UART },		/* UART1_RX */
+	{ 17, MPP_UART },		/* UART1_TX */
+	{ 18, MPP_UART },		/* UART1_CTSn */
+	{ 19, MPP_UART },		/* UART1_RTSn */
+	{ -1 },
 };
 
 static void __init db88f5281_init(void)
@@ -315,39 +329,31 @@ static void __init db88f5281_init(void)
 	 */
 	orion5x_init();
 
+	orion5x_mpp_conf(db88f5281_mpp_modes);
+	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+
 	/*
-	 * Setup the CPU address decode windows for our on-board devices
+	 * Configure peripherals.
 	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&db88f5281_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_uart1_init();
+
 	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
 				DB88F5281_NOR_BOOT_SIZE);
+	platform_device_register(&db88f5281_boot_flash);
+
 	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
-	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
-	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
 
-	/*
-	 * Setup Multiplexing Pins:
-	 * MPP0: GPIO (USB Over Current)	MPP1: GPIO (USB Vbat input)
-	 * MPP2: PCI_REQn[2]			MPP3: PCI_GNTn[2]
-	 * MPP4: PCI_REQn[3]			MPP5: PCI_GNTn[3]
-	 * MPP6: GPIO (JP0, CON17.2)		MPP7: GPIO (JP1, CON17.1)
-	 * MPP8: GPIO (JP2, CON11.2)		MPP9: GPIO (JP3, CON11.3)
-	 * MPP10: GPIO (RTC int)		MPP11: GPIO (Baud Rate Generator)
-	 * MPP12: GPIO (PCI int 1)		MPP13: GPIO (PCI int 2)
-	 * MPP14: NAND_REn[2]			MPP15: NAND_WEn[2]
-	 * MPP16: UART1_RX			MPP17: UART1_TX
-	 * MPP18: UART1_CTS			MPP19: UART1_RTS
-	 * MPP-DEV: DEV_D[16:31]
-	 */
-	orion5x_write(MPP_0_7_CTRL, 0x00222203);
-	orion5x_write(MPP_8_15_CTRL, 0x44000000);
-	orion5x_write(MPP_16_19_CTRL, 0);
-	orion5x_write(MPP_DEV_CTRL, 0);
+	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
+	platform_device_register(&db88f5281_nor_flash);
 
-	orion5x_gpio_set_valid_pins(0x00003fc3);
+	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
+	platform_device_register(&db88f5281_nand_flash);
 
-	platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
 	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
-	orion5x_eth_init(&db88f5281_eth_data);
 }
 
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 27ce967ab9e5..3791ca6f001a 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -27,6 +27,7 @@
 #include <asm/mach/pci.h>
 #include <asm/arch/orion5x.h>
 #include "common.h"
+#include "mpp.h"
 
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
@@ -52,8 +53,6 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	if (irq != -1)
 		return irq;
 
-	pr_err("%s: requested mapping for unknown device\n", __func__);
-
 	return -1;
 }
 
@@ -81,7 +80,6 @@ subsys_initcall(dns323_pci_init);
 
 static struct mv643xx_eth_platform_data dns323_eth_data = {
 	.phy_addr = 8,
-	.force_phy_addr = 1,
 };
 
 /****************************************************************************
@@ -119,7 +117,7 @@ static struct mtd_partition dns323_partitions[] = {
 		.name	= "u-boot",
 		.size	= 0x00030000,
 		.offset	= 0x007d0000,
-	}
+	},
 };
 
 static struct physmap_flash_data dns323_nor_flash_data = {
@@ -137,7 +135,9 @@ static struct resource dns323_nor_flash_resource = {
 static struct platform_device dns323_nor_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
-	.dev		= { .platform_data = &dns323_nor_flash_data, },
+	.dev		= {
+		.platform_data	= &dns323_nor_flash_data,
+	},
 	.resource	= &dns323_nor_flash_resource,
 	.num_resources	= 1,
 };
@@ -170,7 +170,9 @@ static struct gpio_led_platform_data dns323_led_data = {
 static struct platform_device dns323_gpio_leds = {
 	.name		= "leds-gpio",
 	.id		= -1,
-	.dev		= { .platform_data = &dns323_led_data, },
+	.dev		= {
+		.platform_data	= &dns323_led_data,
+	},
 };
 
 /****************************************************************************
@@ -183,35 +185,53 @@ static struct gpio_keys_button dns323_buttons[] = {
 		.gpio		= DNS323_GPIO_KEY_RESET,
 		.desc		= "Reset Button",
 		.active_low	= 1,
-	},
-	{
+	}, {
 		.code		= KEY_POWER,
 		.gpio		= DNS323_GPIO_KEY_POWER,
 		.desc		= "Power Button",
 		.active_low	= 1,
-	}
+	},
 };
 
 static struct gpio_keys_platform_data dns323_button_data = {
 	.buttons	= dns323_buttons,
-	.nbuttons       = ARRAY_SIZE(dns323_buttons),
+	.nbuttons	= ARRAY_SIZE(dns323_buttons),
 };
 
 static struct platform_device dns323_button_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.num_resources	= 0,
-	.dev		= { .platform_data  = &dns323_button_data, },
+	.dev		= {
+		.platform_data	= &dns323_button_data,
+	},
 };
 
 /****************************************************************************
  * General Setup
  */
-
-static struct platform_device *dns323_plat_devices[] __initdata = {
-	&dns323_nor_flash,
-	&dns323_gpio_leds,
-	&dns323_button_device,
+static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
+	{  0, MPP_PCIE_RST_OUTn },
+	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
+	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
+	{  3, MPP_UNUSED },
+	{  4, MPP_GPIO },		/* power button LED */
+	{  5, MPP_GPIO },		/* power button LED */
+	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
+	{  7, MPP_GPIO },		/* M41T80 nIRQ/OUT/SQW */
+	{  8, MPP_GPIO },		/* triggers power off */
+	{  9, MPP_GPIO },		/* power button switch */
+	{ 10, MPP_GPIO },		/* reset button switch */
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_UNUSED },
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_UNUSED },
+	{ 15, MPP_UNUSED },
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
 };
 
 /*
@@ -225,17 +245,15 @@ static struct platform_device *dns323_plat_devices[] __initdata = {
 static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("g760a", 0x3e),
-	},
 #if 0
 	/* this entry requires the new-style driver model lm75 driver,
 	 * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
-	{
+	}, {
 		I2C_BOARD_INFO("g751", 0x48),
-	},
 #endif
-	{
+	}, {
 		I2C_BOARD_INFO("m41t80", 0x68),
-	}
+	},
 };
 
 /* DNS-323 specific power off method */
@@ -250,62 +268,35 @@ static void __init dns323_init(void)
 	/* Setup basic Orion functions. Need to be called early. */
 	orion5x_init();
 
+	orion5x_mpp_conf(dns323_mpp_modes);
+	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&dns323_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
 	 */
 	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
+	platform_device_register(&dns323_nor_flash);
 
-	/* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe
-	 *
-	 * Open a special address decode windows for the PCIe WA.
-	 */
-	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-				ORION5X_PCIE_WA_SIZE);
-
-	/* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
-	orion5x_write(MPP_0_7_CTRL, 0);
-	orion5x_write(MPP_8_15_CTRL, 0);
-	orion5x_write(MPP_16_19_CTRL, 0);
-	orion5x_write(MPP_DEV_CTRL, 0);
-
-	/* Define used GPIO pins
-
-	  GPIO Map:
-
-	  |  0 |     | PEX_RST_OUT (not controlled by GPIO)
-	  |  1 | Out | right amber LED (= sata ch0 LED)  (low-active)
-	  |  2 | Out | left  amber LED (= sata ch1 LED)  (low-active)
-	  |  3 | Out | //unknown//
-	  |  4 | Out | power button LED (low-active, together with pin #5)
-	  |  5 | Out | power button LED (low-active, together with pin #4)
-	  |  6 | In  | GMT G751-2f overtemp. shutdown signal (low-active)
-	  |  7 | In  | M41T80 nIRQ/OUT/SQW signal
-	  |  8 | Out | triggers power off (high-active)
-	  |  9 | In  | power button switch (low-active)
-	  | 10 | In  | reset button switch (low-active)
-	  | 11 | Out | //unknown//
-	  | 12 | Out | //unknown//
-	  | 13 | Out | //unknown//
-	  | 14 | Out | //unknown//
-	  | 15 | Out | //unknown//
-	*/
-	orion5x_gpio_set_valid_pins(0x07f6);
-
-	/* register dns323 specific power-off method */
-	if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
-	    || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0))
-		pr_err("DNS323: failed to setup power-off GPIO\n");
-
-	pm_power_off = dns323_power_off;
+	platform_device_register(&dns323_gpio_leds);
 
-	/* register flash and other platform devices */
-	platform_add_devices(dns323_plat_devices,
-			     ARRAY_SIZE(dns323_plat_devices));
+	platform_device_register(&dns323_button_device);
 
 	i2c_register_board_info(0, dns323_i2c_devices,
 				ARRAY_SIZE(dns323_i2c_devices));
 
-	orion5x_eth_init(&dns323_eth_data);
+	/* register dns323 specific power-off method */
+	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+		pr_err("DNS323: failed to setup power-off GPIO\n");
+	pm_power_off = dns323_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index 8108c316c426..d09797990f41 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -24,9 +24,12 @@ static DEFINE_SPINLOCK(gpio_lock);
 static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
 static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
 
-void __init orion5x_gpio_set_valid_pins(u32 pins)
+void __init orion5x_gpio_set_valid(unsigned pin, int valid)
 {
-	gpio_valid[0] = pins;
+	if (valid)
+		__set_bit(pin, gpio_valid);
+	else
+		__clear_bit(pin, gpio_valid);
 }
 
 /*
@@ -93,10 +96,10 @@ int gpio_get_value(unsigned pin)
 {
 	int val, mask = 1 << pin;
 
-	if (orion5x_read(GPIO_IO_CONF) & mask)
-		val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL);
+	if (readl(GPIO_IO_CONF) & mask)
+		val = readl(GPIO_DATA_IN) ^ readl(GPIO_IN_POL);
 	else
-		val = orion5x_read(GPIO_OUT);
+		val = readl(GPIO_OUT);
 
 	return val & mask;
 }
@@ -188,39 +191,39 @@ void gpio_display(void)
 			printk("GPIO, free\n");
 		} else {
 			printk("GPIO, used by %s, ", gpio_label[i]);
-			if (orion5x_read(GPIO_IO_CONF) & (1 << i)) {
+			if (readl(GPIO_IO_CONF) & (1 << i)) {
 				printk("input, active %s, level %s, edge %s\n",
-				((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
-				((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
-				((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
+				((readl(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
+				((readl(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
+				((readl(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
 			} else {
-				printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1);
+				printk("output, val=%d\n", (readl(GPIO_OUT) >> i) & 1);
 			}
 		}
 	}
 
 	printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
-				MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL));
+				MPP_0_7_CTRL, readl(MPP_0_7_CTRL));
 	printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
-				MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL));
+				MPP_8_15_CTRL, readl(MPP_8_15_CTRL));
 	printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
-				MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL));
+				MPP_16_19_CTRL, readl(MPP_16_19_CTRL));
 	printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
-				MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL));
+				MPP_DEV_CTRL, readl(MPP_DEV_CTRL));
 	printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
-				GPIO_OUT, orion5x_read(GPIO_OUT));
+				GPIO_OUT, readl(GPIO_OUT));
 	printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
-				GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF));
+				GPIO_IO_CONF, readl(GPIO_IO_CONF));
 	printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
-				GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN));
+				GPIO_BLINK_EN, readl(GPIO_BLINK_EN));
 	printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
-				GPIO_IN_POL, orion5x_read(GPIO_IN_POL));
+				GPIO_IN_POL, readl(GPIO_IN_POL));
 	printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
-				GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN));
+				GPIO_DATA_IN, readl(GPIO_DATA_IN));
 	printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
-				GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK));
+				GPIO_LEVEL_MASK, readl(GPIO_LEVEL_MASK));
 	printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE));
+				GPIO_EDGE_CAUSE, readl(GPIO_EDGE_CAUSE));
 	printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK));
+				GPIO_EDGE_MASK, readl(GPIO_EDGE_MASK));
 }
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index dd21f38c5d37..e2a0084ab4a3 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -82,7 +82,7 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
 	int pin = irq_to_gpio(irq);
 	struct irq_desc *desc;
 
-	if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
+	if ((readl(GPIO_IO_CONF) & (1 << pin)) == 0) {
 		printk(KERN_ERR "orion5x_gpio_set_irq_type failed "
 				"(irq %d, pin %d).\n", irq, pin);
 		return -EINVAL;
@@ -117,7 +117,7 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
 		/*
 		 * set initial polarity based on current input level
 		 */
-		if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN))
+		if ((readl(GPIO_IN_POL) ^ readl(GPIO_DATA_IN))
 		    & (1 << pin))
 			orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
 		else
@@ -149,8 +149,8 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
 	offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8;
-	cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) |
-		(orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK));
+	cause = (readl(GPIO_DATA_IN) & readl(GPIO_LEVEL_MASK)) |
+		(readl(GPIO_EDGE_CAUSE) & readl(GPIO_EDGE_MASK));
 
 	for (pin = offs; pin < offs + 8; pin++) {
 		if (cause & (1 << pin)) {
@@ -158,9 +158,9 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			desc = irq_desc + irq;
 			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
 				/* Swap polarity (race with GPIO line) */
-				u32 polarity = orion5x_read(GPIO_IN_POL);
+				u32 polarity = readl(GPIO_IN_POL);
 				polarity ^= 1 << pin;
-				orion5x_write(GPIO_IN_POL, polarity);
+				writel(polarity, GPIO_IN_POL);
 			}
 			desc_handle_irq(irq, desc);
 		}
@@ -175,9 +175,9 @@ static void __init orion5x_init_gpio_irq(void)
 	/*
 	 * Mask and clear GPIO IRQ interrupts
 	 */
-	orion5x_write(GPIO_LEVEL_MASK, 0x0);
-	orion5x_write(GPIO_EDGE_MASK, 0x0);
-	orion5x_write(GPIO_EDGE_CAUSE, 0x0);
+	writel(0x0, GPIO_LEVEL_MASK);
+	writel(0x0, GPIO_EDGE_MASK);
+	writel(0x0, GPIO_EDGE_CAUSE);
 
 	/*
 	 * Register chained level handlers for GPIO IRQs by default.
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index f5074b877b7f..84feac4a1fe2 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -13,10 +13,12 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
+#include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/i2c.h>
+#include <linux/serial_reg.h>
 #include <linux/ata_platform.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -25,6 +27,7 @@
 #include <asm/arch/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
+#include "mpp.h"
 
 /*****************************************************************************
  * KUROBOX-PRO Info
@@ -53,13 +56,11 @@ static struct mtd_partition kurobox_pro_nand_parts[] = {
 		.name	= "uImage",
 		.offset	= 0,
 		.size	= SZ_4M,
-	},
-	{
+	}, {
 		.name	= "rootfs",
 		.offset	= SZ_4M,
 		.size	= SZ_64M,
-	},
-	{
+	}, {
 		.name	= "extra",
 		.offset	= SZ_4M + SZ_64M,
 		.size	= SZ_256M - (SZ_4M + SZ_64M),
@@ -132,8 +133,6 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCI isn't used on the Kuro
 	 */
-	printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
-
 	return -1;
 }
 
@@ -161,7 +160,6 @@ subsys_initcall(kurobox_pro_pci_init);
 
 static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
 	.phy_addr	= 8,
-	.force_phy_addr = 1,
 };
 
 /*****************************************************************************
@@ -175,12 +173,169 @@ static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
  * SATA
  ****************************************************************************/
 static struct mv_sata_platform_data kurobox_pro_sata_data = {
-	.n_ports        = 2,
+	.n_ports	= 2,
 };
 
 /*****************************************************************************
+ * Kurobox Pro specific power off method via UART1-attached microcontroller
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static int kurobox_pro_miconread(unsigned char *buf, int count)
+{
+	int i;
+	int timeout;
+
+	for (i = 0; i < count; i++) {
+		timeout = 10;
+
+		while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
+			if (--timeout == 0)
+				break;
+			udelay(1000);
+		}
+
+		if (timeout == 0)
+			break;
+		buf[i] = readl(UART1_REG(RX));
+	}
+
+	/* return read bytes */
+	return i;
+}
+
+static int kurobox_pro_miconwrite(const unsigned char *buf, int count)
+{
+	int i = 0;
+
+	while (count--) {
+		while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
+			barrier();
+		writel(buf[i++], UART1_REG(TX));
+	}
+
+	return 0;
+}
+
+static int kurobox_pro_miconsend(const unsigned char *data, int count)
+{
+	int i;
+	unsigned char checksum = 0;
+	unsigned char recv_buf[40];
+	unsigned char send_buf[40];
+	unsigned char correct_ack[3];
+	int retry = 2;
+
+	/* Generate checksum */
+	for (i = 0; i < count; i++)
+		checksum -=  data[i];
+
+	do {
+		/* Send data */
+		kurobox_pro_miconwrite(data, count);
+
+		/* send checksum */
+		kurobox_pro_miconwrite(&checksum, 1);
+
+		if (kurobox_pro_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
+			printk(KERN_ERR ">%s: receive failed.\n", __func__);
+
+			/* send preamble to clear the receive buffer */
+			memset(&send_buf, 0xff, sizeof(send_buf));
+			kurobox_pro_miconwrite(send_buf, sizeof(send_buf));
+
+			/* make dummy reads */
+			mdelay(100);
+			kurobox_pro_miconread(recv_buf, sizeof(recv_buf));
+		} else {
+			/* Generate expected ack */
+			correct_ack[0] = 0x01;
+			correct_ack[1] = data[1];
+			correct_ack[2] = 0x00;
+
+			/* checksum Check */
+			if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
+			     recv_buf[3]) & 0xFF) {
+				printk(KERN_ERR ">%s: Checksum Error : "
+					"Received data[%02x, %02x, %02x, %02x]"
+					"\n", __func__, recv_buf[0],
+					recv_buf[1], recv_buf[2], recv_buf[3]);
+			} else {
+				/* Check Received Data */
+				if (correct_ack[0] == recv_buf[0] &&
+				    correct_ack[1] == recv_buf[1] &&
+				    correct_ack[2] == recv_buf[2]) {
+					/* Interval for next command */
+					mdelay(10);
+
+					/* Receive ACK */
+					return 0;
+				}
+			}
+			/* Received NAK or illegal Data */
+			printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
+					"Received\n", __func__);
+		}
+	} while (retry--);
+
+	/* Interval for next command */
+	mdelay(10);
+
+	return -1;
+}
+
+static void kurobox_pro_power_off(void)
+{
+	const unsigned char watchdogkill[]	= {0x01, 0x35, 0x00};
+	const unsigned char shutdownwait[]	= {0x00, 0x0c};
+	const unsigned char poweroff[]		= {0x00, 0x06};
+	/* 38400 baud divisor */
+	const unsigned divisor = ((ORION5X_TCLK + (8 * 38400)) / (16 * 38400));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack uart1 and reset into sane state (38400,8n1,even parity) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x1b, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x07, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* Send the commands to shutdown the Kurobox Pro */
+	kurobox_pro_miconsend(watchdogkill, sizeof(watchdogkill)) ;
+	kurobox_pro_miconsend(shutdownwait, sizeof(shutdownwait)) ;
+	kurobox_pro_miconsend(poweroff, sizeof(poweroff));
+}
+
+/*****************************************************************************
  * General Setup
  ****************************************************************************/
+static struct orion5x_mpp_mode kurobox_pro_mpp_modes[] __initdata = {
+	{  0, MPP_UNUSED },
+	{  1, MPP_UNUSED },
+	{  2, MPP_GPIO },		/* GPIO Micon */
+	{  3, MPP_GPIO },		/* GPIO Rtc */
+	{  4, MPP_UNUSED },
+	{  5, MPP_UNUSED },
+	{  6, MPP_NAND },		/* NAND Flash REn */
+	{  7, MPP_NAND },		/* NAND Flash WEn */
+	{  8, MPP_UNUSED },
+	{  9, MPP_UNUSED },
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },		/* SATA 0 presence */
+	{ 13, MPP_SATA_LED },		/* SATA 1 presence */
+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
+	{ 16, MPP_UART },		/* UART1 RXD */
+	{ 17, MPP_UART },		/* UART1 TXD */
+	{ 18, MPP_UART },		/* UART1 CTSn */
+	{ 19, MPP_UART },		/* UART1 RTSn */
+	{ -1 },
+};
 
 static void __init kurobox_pro_init(void)
 {
@@ -189,46 +344,33 @@ static void __init kurobox_pro_init(void)
 	 */
 	orion5x_init();
 
-	/*
-	 * Setup the CPU address decode windows for our devices
-	 */
-	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
-				KUROBOX_PRO_NOR_BOOT_SIZE);
-	orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
+	orion5x_mpp_conf(kurobox_pro_mpp_modes);
 
 	/*
-	 * Open a special address decode windows for the PCIe WA.
+	 * Configure peripherals.
 	 */
-	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-				ORION5X_PCIE_WA_SIZE);
-
-	/*
-	 * Setup Multiplexing Pins --
-	 * MPP[0-1] Not used
-	 * MPP[2] GPIO Micon
-	 * MPP[3] GPIO RTC
-	 * MPP[4-5] Not used
-	 * MPP[6] Nand Flash REn
-	 * MPP[7] Nand Flash WEn
-	 * MPP[8-11] Not used
-	 * MPP[12] SATA 0 presence Indication
-	 * MPP[13] SATA 1 presence Indication
-	 * MPP[14] SATA 0 active Indication
-	 * MPP[15] SATA 1 active indication
-	 * MPP[16-19] Not used
-	 */
-	orion5x_write(MPP_0_7_CTRL, 0x44220003);
-	orion5x_write(MPP_8_15_CTRL, 0x55550000);
-	orion5x_write(MPP_16_19_CTRL, 0x0);
-
-	orion5x_gpio_set_valid_pins(0x0000000c);
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&kurobox_pro_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&kurobox_pro_sata_data);
+	orion5x_uart0_init();
+	orion5x_uart1_init();
 
+	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
+				   KUROBOX_PRO_NOR_BOOT_SIZE);
 	platform_device_register(&kurobox_pro_nor_flash);
-	if (machine_is_kurobox_pro())
+
+	if (machine_is_kurobox_pro()) {
+		orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
+				       KUROBOX_PRO_NAND_SIZE);
 		platform_device_register(&kurobox_pro_nand_flash);
+	}
+
 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
-	orion5x_eth_init(&kurobox_pro_eth_data);
-	orion5x_sata_init(&kurobox_pro_sata_data);
+
+	/* register Kurobox Pro specific power-off method */
+	pm_power_off = kurobox_pro_power_off;
 }
 
 #ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
new file mode 100644
index 000000000000..a48cadb01590
--- /dev/null
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -0,0 +1,163 @@
+/*
+ * arch/arm/mach-orion5x/mpp.c
+ *
+ * MPP functions for Marvell Orion 5x SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include "common.h"
+#include "mpp.h"
+
+static int is_5181l(void)
+{
+	u32 dev;
+	u32 rev;
+
+	orion5x_pcie_id(&dev, &rev);
+
+	return !!(dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0);
+}
+
+static int is_5182(void)
+{
+	u32 dev;
+	u32 rev;
+
+	orion5x_pcie_id(&dev, &rev);
+
+	return !!(dev == MV88F5182_DEV_ID);
+}
+
+static int is_5281(void)
+{
+	u32 dev;
+	u32 rev;
+
+	orion5x_pcie_id(&dev, &rev);
+
+	return !!(dev == MV88F5281_DEV_ID);
+}
+
+static int __init determine_type_encoding(int mpp, enum orion5x_mpp_type type)
+{
+	switch (type) {
+	case MPP_UNUSED:
+	case MPP_GPIO:
+		if (mpp == 0)
+			return 3;
+		if (mpp >= 1 && mpp <= 15)
+			return 0;
+		if (mpp >= 16 && mpp <= 19) {
+			if (is_5182())
+				return 5;
+			if (type == MPP_UNUSED)
+				return 0;
+		}
+		return -1;
+
+	case MPP_PCIE_RST_OUTn:
+		if (mpp == 0)
+			return 0;
+		return -1;
+
+	case MPP_PCI_ARB:
+		if (mpp >= 0 && mpp <= 7)
+			return 2;
+		return -1;
+
+	case MPP_PCI_PMEn:
+		if (mpp == 2)
+			return 3;
+		return -1;
+
+	case MPP_GIGE:
+		if (mpp >= 8 && mpp <= 19)
+			return 1;
+		return -1;
+
+	case MPP_NAND:
+		if (is_5182() || is_5281()) {
+			if (mpp >= 4 && mpp <= 7)
+				return 4;
+			if (mpp >= 12 && mpp <= 17)
+				return 4;
+		}
+		return -1;
+
+	case MPP_PCI_CLK:
+		if (is_5181l() && mpp >= 6 && mpp <= 7)
+			return 5;
+		return -1;
+
+	case MPP_SATA_LED:
+		if (is_5182()) {
+			if (mpp >= 4 && mpp <= 7)
+				return 5;
+			if (mpp >= 12 && mpp <= 15)
+				return 5;
+		}
+		return -1;
+
+	case MPP_UART:
+		if (mpp >= 16 && mpp <= 19)
+			return 0;
+		return -1;
+	}
+
+	printk(KERN_INFO "unknown MPP type %d\n", type);
+
+	return -1;
+}
+
+void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
+{
+	u32 mpp_0_7_ctrl = readl(MPP_0_7_CTRL);
+	u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
+	u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
+
+	while (mode->mpp >= 0) {
+		u32 *reg;
+		int num_type;
+		int shift;
+
+		if (mode->mpp >= 0 && mode->mpp <= 7)
+			reg = &mpp_0_7_ctrl;
+		else if (mode->mpp >= 8 && mode->mpp <= 15)
+			reg = &mpp_8_15_ctrl;
+		else if (mode->mpp >= 16 && mode->mpp <= 19)
+			reg = &mpp_16_19_ctrl;
+		else {
+			printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
+					"(%d)\n", mode->mpp);
+			continue;
+		}
+
+		num_type = determine_type_encoding(mode->mpp, mode->type);
+		if (num_type < 0) {
+			printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
+					"combination (%d, %d)\n", mode->mpp,
+					mode->type);
+			continue;
+		}
+
+		shift = (mode->mpp & 7) << 2;
+		*reg &= ~(0xf << shift);
+		*reg |= (num_type & 0xf) << shift;
+
+		orion5x_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
+
+		mode++;
+	}
+
+	writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
+	writel(mpp_8_15_ctrl, MPP_8_15_CTRL);
+	writel(mpp_16_19_ctrl, MPP_16_19_CTRL);
+}
diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h
new file mode 100644
index 000000000000..290e610dc012
--- /dev/null
+++ b/arch/arm/mach-orion5x/mpp.h
@@ -0,0 +1,74 @@
+#ifndef __ARCH_ORION5X_MPP_H
+#define __ARCH_ORION5X_MPP_H
+
+enum orion5x_mpp_type {
+	/*
+	 * This MPP is unused.
+	 */
+	MPP_UNUSED,
+
+	/*
+	 * This MPP pin is used as a generic GPIO pin.  Valid for
+	 * MPPs 0-15 and device bus data pins 16-31.  On 5182, also
+	 * valid for MPPs 16-19.
+	 */
+	MPP_GPIO,
+
+	/*
+	 * This MPP is used as PCIe_RST_OUTn pin.  Valid for
+	 * MPP 0 only.
+	 */
+	MPP_PCIE_RST_OUTn,
+
+	/*
+	 * This MPP is used as PCI arbiter pin (REQn/GNTn).
+	 * Valid for MPPs 0-7 only.
+	 */
+	MPP_PCI_ARB,
+
+	/*
+	 * This MPP is used as PCI_PMEn pin.  Valid for MPP 2 only.
+	 */
+	MPP_PCI_PMEn,
+
+	/*
+	 * This MPP is used as GigE half-duplex (COL, CRS) or GMII
+	 * (RXERR, CRS, TXERR, TXD[7:4], RXD[7:4]) pin.  Valid for
+	 * MPPs 8-19 only.
+	 */
+	MPP_GIGE,
+
+	/*
+	 * This MPP is used as NAND REn/WEn pin.  Valid for MPPs
+	 * 4-7 and 12-17 only, and only on the 5181l/5182/5281.
+	 */
+	MPP_NAND,
+
+	/*
+	 * This MPP is used as a PCI clock output pin.  Valid for
+	 * MPPs 6-7 only, and only on the 5181l.
+	 */
+	MPP_PCI_CLK,
+
+	/*
+	 * This MPP is used as a SATA presence/activity LED.
+	 * Valid for MPPs 4-7 and 12-15 only, and only on the 5182.
+	 */
+	MPP_SATA_LED,
+
+	/*
+	 * This MPP is used as UART1 RXD/TXD/CTSn/RTSn pin.
+	 * Valid for MPPs 16-19 only.
+	 */
+	MPP_UART,
+};
+
+struct orion5x_mpp_mode {
+	int			mpp;
+	enum orion5x_mpp_type	type;
+};
+
+void orion5x_mpp_conf(struct orion5x_mpp_mode *mode);
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
new file mode 100644
index 000000000000..7ce9e407d9d1
--- /dev/null
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -0,0 +1,270 @@
+/*
+ * Maxtor Shared Storage II Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+#define MSS2_NOR_BOOT_BASE	0xff800000
+#define MSS2_NOR_BOOT_SIZE	SZ_256K
+
+/*****************************************************************************
+ * Maxtor Shared Storage II Info
+ ****************************************************************************/
+
+/*
+ * Maxtor Shared Storage II hardware :
+ * - Marvell 88F5182-A2 C500
+ * - Marvell 88E1111 Gigabit Ethernet PHY
+ * - RTC M41T81 (@0x68) on I2C bus
+ * - 256KB NOR flash
+ * - 64MB of RAM
+ */
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data mss2_nor_flash_data = {
+	.width		= 1,
+};
+
+static struct resource mss2_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= MSS2_NOR_BOOT_BASE,
+	.end		= MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device mss2_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &mss2_nor_flash_data,
+	},
+	.resource	= &mss2_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+/****************************************************************************
+ * PCI setup
+ ****************************************************************************/
+static int __init mss2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	return -1;
+}
+
+static struct hw_pci mss2_pci __initdata = {
+	.nr_controllers = 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= mss2_pci_map_irq,
+};
+
+static int __init mss2_pci_init(void)
+{
+	if (machine_is_mss2())
+		pci_common_init(&mss2_pci);
+
+	return 0;
+}
+subsys_initcall(mss2_pci_init);
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data mss2_eth_data = {
+	.phy_addr	= 8,
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data mss2_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * GPIO buttons
+ ****************************************************************************/
+
+#define MSS2_GPIO_KEY_RESET	12
+#define MSS2_GPIO_KEY_POWER	11
+
+static struct gpio_keys_button mss2_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= MSS2_GPIO_KEY_POWER,
+		.desc		= "Power",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_RESTART,
+		.gpio		= MSS2_GPIO_KEY_RESET,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mss2_button_data = {
+	.buttons	= mss2_buttons,
+	.nbuttons	= ARRAY_SIZE(mss2_buttons),
+};
+
+static struct platform_device mss2_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &mss2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * RTC m41t81 on I2C bus
+ ****************************************************************************/
+
+#define MSS2_GPIO_RTC_IRQ	3
+
+static struct i2c_board_info __initdata mss2_i2c_rtc = {
+	I2C_BOARD_INFO("m41t81", 0x68),
+};
+
+/*****************************************************************************
+ * MSS2 power off method
+ ****************************************************************************/
+/*
+ * On the Maxtor Shared Storage II, the shutdown process is the following :
+ * - Userland modifies U-boot env to tell U-boot to go idle at next boot
+ * - The board reboots
+ * - U-boot starts and go into an idle mode until the user press "power"
+ */
+static void mss2_power_off(void)
+{
+	u32 reg;
+
+	/*
+	 * Enable and issue soft reset
+	 */
+	reg = readl(CPU_RESET_MASK);
+	reg |= 1 << 2;
+	writel(reg, CPU_RESET_MASK);
+
+	reg = readl(CPU_SOFT_RESET);
+	reg |= 1;
+	writel(reg, CPU_SOFT_RESET);
+}
+
+/****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode mss2_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* Power LED */
+	{  1, MPP_GPIO },		/* Error LED */
+	{  2, MPP_UNUSED },
+	{  3, MPP_GPIO },		/* RTC interrupt */
+	{  4, MPP_GPIO },		/* HDD ind. (Single/Dual)*/
+	{  5, MPP_GPIO },		/* HD0 5V control */
+	{  6, MPP_GPIO },		/* HD0 12V control */
+	{  7, MPP_GPIO },		/* HD1 5V control */
+	{  8, MPP_GPIO },		/* HD1 12V control */
+	{  9, MPP_UNUSED },
+	{ 10, MPP_GPIO },		/* Fan control */
+	{ 11, MPP_GPIO },		/* Power button */
+	{ 12, MPP_GPIO },		/* Reset button */
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
+};
+
+static void __init mss2_init(void)
+{
+	/* Setup basic Orion functions. Need to be called early. */
+	orion5x_init();
+
+	orion5x_mpp_conf(mss2_mpp_modes);
+
+	/*
+	 * MPP[20] Unused
+	 * MPP[21] PCI clock
+	 * MPP[22] USB 0 over current
+	 * MPP[23] USB 1 over current
+	 */
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&mss2_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&mss2_sata_data);
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
+	platform_device_register(&mss2_nor_flash);
+
+	platform_device_register(&mss2_button_device);
+
+	if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
+		if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
+			mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
+		else
+			gpio_free(MSS2_GPIO_RTC_IRQ);
+	}
+	i2c_register_board_info(0, &mss2_i2c_rtc, 1);
+
+	/* register mss2 specific power-off method */
+	pm_power_off = mss2_power_off;
+}
+
+MACHINE_START(MSS2, "Maxtor Shared Storage II")
+	/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= mss2_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
new file mode 100644
index 000000000000..55f3b0fdef8b
--- /dev/null
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+#define MV2120_NOR_BOOT_BASE	0xf4000000
+#define MV2120_NOR_BOOT_SIZE	SZ_512K
+
+#define MV2120_GPIO_RTC_IRQ	3
+#define MV2120_GPIO_KEY_RESET	17
+#define MV2120_GPIO_KEY_POWER	18
+#define MV2120_GPIO_POWER_OFF	19
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data mv2120_eth_data = {
+	.phy_addr	= 8,
+};
+
+static struct mv_sata_platform_data mv2120_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mtd_partition mv2120_partitions[] = {
+	{
+		.name	= "firmware",
+		.size	= 0x00080000,
+		.offset	= 0,
+	},
+};
+
+static struct physmap_flash_data mv2120_nor_flash_data = {
+	.width		= 1,
+	.parts		= mv2120_partitions,
+	.nr_parts	= ARRAY_SIZE(mv2120_partitions)
+};
+
+static struct resource mv2120_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= MV2120_NOR_BOOT_BASE,
+	.end		= MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device mv2120_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &mv2120_nor_flash_data,
+	},
+	.resource	= &mv2120_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+static struct gpio_keys_button mv2120_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= MV2120_GPIO_KEY_RESET,
+		.desc		= "reset",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_POWER,
+		.gpio		= MV2120_GPIO_KEY_POWER,
+		.desc		= "power",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mv2120_button_data = {
+	.buttons	= mv2120_buttons,
+	.nbuttons	= ARRAY_SIZE(mv2120_buttons),
+};
+
+static struct platform_device mv2120_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mv2120_button_data,
+	},
+};
+
+
+/****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode mv2120_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* Sys status LED */
+	{  1, MPP_GPIO },		/* Sys error LED */
+	{  2, MPP_GPIO },		/* OverTemp interrupt */
+	{  3, MPP_GPIO },		/* RTC interrupt */
+	{  4, MPP_GPIO },		/* V_LED 5V */
+	{  5, MPP_GPIO },		/* V_LED 3.3V */
+	{  6, MPP_UNUSED },
+	{  7, MPP_UNUSED },
+	{  8, MPP_GPIO },		/* SATA 0 fail LED */
+	{  9, MPP_GPIO },		/* SATA 1 fail LED */
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },		/* SATA 0 presence */
+	{ 13, MPP_SATA_LED },		/* SATA 1 presence */
+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_GPIO },		/* Reset button */
+	{ 18, MPP_GPIO },		/* Power button */
+	{ 19, MPP_GPIO },		/* Power off */
+	{ -1 },
+};
+
+static struct i2c_board_info __initdata mv2120_i2c_rtc = {
+	I2C_BOARD_INFO("pcf8563", 0x51),
+	.irq	= 0,
+};
+
+static struct gpio_led mv2120_led_pins[] = {
+	{
+		.name			= "mv2120:blue:health",
+		.gpio			= 0,
+	},
+	{
+		.name			= "mv2120:red:health",
+		.gpio			= 1,
+	},
+	{
+		.name			= "mv2120:led:bright",
+		.gpio			= 4,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "mv2120:led:dimmed",
+		.gpio			= 5,
+	},
+	{
+		.name			= "mv2120:red:sata0",
+		.gpio			= 8,
+		.active_low		= 1,
+	},
+	{
+		.name			= "mv2120:red:sata1",
+		.gpio			= 9,
+		.active_low		= 1,
+	},
+
+};
+
+static struct gpio_led_platform_data mv2120_led_data = {
+	.leds		= mv2120_led_pins,
+	.num_leds	= ARRAY_SIZE(mv2120_led_pins),
+};
+
+static struct platform_device mv2120_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mv2120_led_data,
+	}
+};
+
+static void mv2120_power_off(void)
+{
+	pr_info("%s: triggering power-off...\n", __func__);
+	gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
+}
+
+static void __init mv2120_init(void)
+{
+	/* Setup basic Orion functions. Need to be called early. */
+	orion5x_init();
+
+	orion5x_mpp_conf(mv2120_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&mv2120_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&mv2120_sata_data);
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
+	platform_device_register(&mv2120_nor_flash);
+
+	platform_device_register(&mv2120_button_device);
+
+	if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
+		if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
+			mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
+		else
+			gpio_free(MV2120_GPIO_RTC_IRQ);
+	}
+	i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
+	platform_device_register(&mv2120_leds);
+
+	/* register mv2120 specific power-off method */
+	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
+		pr_err("mv2120: failed to setup power-off GPIO\n");
+	pm_power_off = mv2120_power_off;
+}
+
+/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(MV2120, "HP Media Vault mv2120")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= mv2120_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 9d5d39fa19c3..256a4f680935 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -152,6 +152,8 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
 		printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
 				   "read transaction workaround\n");
+		orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+					  ORION5X_PCIE_WA_SIZE);
 		pcie_ops.read = pcie_rd_conf_wa;
 	}
 
@@ -240,13 +242,13 @@ static int __init pcie_setup(struct pci_sys_data *sys)
  * PCI Address Decode Windows registers
  */
 #define PCI_BAR_SIZE_DDR_CS(n)	(((n) == 0) ? ORION5X_PCI_REG(0xc08) : \
-				((n) == 1) ? ORION5X_PCI_REG(0xd08) :  \
-				((n) == 2) ? ORION5X_PCI_REG(0xc0c) :  \
-				((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
-#define PCI_BAR_REMAP_DDR_CS(n)	(((n) ==0) ? ORION5X_PCI_REG(0xc48) :  \
-				((n) == 1) ? ORION5X_PCI_REG(0xd48) :  \
-				((n) == 2) ? ORION5X_PCI_REG(0xc4c) :  \
-				((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
+				 ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \
+				 ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \
+				 ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
+#define PCI_BAR_REMAP_DDR_CS(n)	(((n) == 0) ? ORION5X_PCI_REG(0xc48) : \
+				 ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \
+				 ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \
+				 ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
 #define PCI_BAR_ENABLE		ORION5X_PCI_REG(0xc3c)
 #define PCI_ADDR_DECODE_CTRL	ORION5X_PCI_REG(0xd3c)
 
@@ -264,9 +266,11 @@ static int __init pcie_setup(struct pci_sys_data *sys)
  */
 static DEFINE_SPINLOCK(orion5x_pci_lock);
 
+static int orion5x_pci_cardbus_mode;
+
 static int orion5x_pci_local_bus_nr(void)
 {
-	u32 conf = orion5x_read(PCI_P2P_CONF);
+	u32 conf = readl(PCI_P2P_CONF);
 	return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
 }
 
@@ -276,11 +280,11 @@ static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func,
 	unsigned long flags;
 	spin_lock_irqsave(&orion5x_pci_lock, flags);
 
-	orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
-			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+	writel(PCI_CONF_BUS(bus) |
+		PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+		PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
 
-	*val = orion5x_read(PCI_CONF_DATA);
+	*val = readl(PCI_CONF_DATA);
 
 	if (size == 1)
 		*val = (*val >> (8*(where & 0x3))) & 0xff;
@@ -300,9 +304,9 @@ static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
 
 	spin_lock_irqsave(&orion5x_pci_lock, flags);
 
-	orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
-			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+	writel(PCI_CONF_BUS(bus) |
+		PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+		PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
 
 	if (size == 4) {
 		__raw_writel(val, PCI_CONF_DATA);
@@ -319,14 +323,30 @@ static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
 	return ret;
 }
 
+static int orion5x_pci_valid_config(int bus, u32 devfn)
+{
+	if (bus == orion5x_pci_local_bus_nr()) {
+		/*
+		 * Don't go out for local device
+		 */
+		if (PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
+			return 0;
+
+		/*
+		 * When the PCI signals are directly connected to a
+		 * Cardbus slot, ignore all but device IDs 0 and 1.
+		 */
+		if (orion5x_pci_cardbus_mode && PCI_SLOT(devfn) > 1)
+			return 0;
+	}
+
+	return 1;
+}
+
 static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
 				int where, int size, u32 *val)
 {
-	/*
-	 * Don't go out for local device
-	 */
-	if (bus->number == orion5x_pci_local_bus_nr() &&
-	    PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) {
+	if (!orion5x_pci_valid_config(bus->number, devfn)) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
@@ -338,8 +358,7 @@ static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
 static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn,
 				int where, int size, u32 val)
 {
-	if (bus->number == orion5x_pci_local_bus_nr() &&
-	    PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
+	if (!orion5x_pci_valid_config(bus->number, devfn))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
@@ -353,9 +372,9 @@ static struct pci_ops pci_ops = {
 
 static void __init orion5x_pci_set_bus_nr(int nr)
 {
-	u32 p2p = orion5x_read(PCI_P2P_CONF);
+	u32 p2p = readl(PCI_P2P_CONF);
 
-	if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) {
+	if (readl(PCI_MODE) & PCI_MODE_PCIX) {
 		/*
 		 * PCI-X mode
 		 */
@@ -372,7 +391,7 @@ static void __init orion5x_pci_set_bus_nr(int nr)
 		 */
 		p2p &= ~PCI_P2P_BUS_MASK;
 		p2p |= (nr << PCI_P2P_BUS_OFFS);
-		orion5x_write(PCI_P2P_CONF, p2p);
+		writel(p2p, PCI_P2P_CONF);
 	}
 }
 
@@ -399,7 +418,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
 	 * First, disable windows.
 	 */
 	win_enable = 0xffffffff;
-	orion5x_write(PCI_BAR_ENABLE, win_enable);
+	writel(win_enable, PCI_BAR_ENABLE);
 
 	/*
 	 * Setup windows for DDR banks.
@@ -425,10 +444,10 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
 		 */
 		reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index);
 		orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0);
-		orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index),
-				(cs->size - 1) & 0xfffff000);
-		orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index),
-				cs->base & 0xfffff000);
+		writel((cs->size - 1) & 0xfffff000,
+			PCI_BAR_SIZE_DDR_CS(cs->cs_index));
+		writel(cs->base & 0xfffff000,
+			PCI_BAR_REMAP_DDR_CS(cs->cs_index));
 
 		/*
 		 * Enable decode window for this chip select.
@@ -439,7 +458,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
 	/*
 	 * Re-enable decode windows.
 	 */
-	orion5x_write(PCI_BAR_ENABLE, win_enable);
+	writel(win_enable, PCI_BAR_ENABLE);
 
 	/*
 	 * Disable automatic update of address remaping when writing to BARs.
@@ -522,6 +541,11 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
 
+void __init orion5x_pci_set_cardbus_mode(void)
+{
+	orion5x_pci_cardbus_mode = 1;
+}
+
 int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
 {
 	int ret = 0;
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
new file mode 100644
index 000000000000..d50e3650a09e
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -0,0 +1,161 @@
+/*
+ * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+ *
+ * Marvell Orion-VoIP FXO Reference Design Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * RD-88F5181L FXO Info
+ ****************************************************************************/
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define RD88F5181L_FXO_NOR_BOOT_BASE		0xff800000
+#define RD88F5181L_FXO_NOR_BOOT_SIZE		SZ_8M
+
+
+/*****************************************************************************
+ * 8M NOR Flash on Device bus Boot chip select
+ ****************************************************************************/
+static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
+	.width		= 1,
+};
+
+static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= RD88F5181L_FXO_NOR_BOOT_BASE,
+	.end		= RD88F5181L_FXO_NOR_BOOT_BASE +
+			  RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &rd88f5181l_fxo_nor_boot_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &rd88f5181l_fxo_nor_boot_flash_resource,
+};
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* LED1 CardBus LED (front panel) */
+	{  1, MPP_GPIO },		/* PCI_intA */
+	{  2, MPP_GPIO },		/* Hard Reset / Factory Init*/
+	{  3, MPP_GPIO },		/* FXS or DAA select */
+	{  4, MPP_GPIO },		/* LED6 - phone LED (front panel) */
+	{  5, MPP_GPIO },		/* LED5 - phone LED (front panel) */
+	{  6, MPP_PCI_CLK },		/* CPU PCI refclk */
+	{  7, MPP_PCI_CLK },		/* PCI/PCIe refclk */
+	{  8, MPP_GPIO },		/* CardBus reset */
+	{  9, MPP_GPIO },		/* GE_RXERR */
+	{ 10, MPP_GPIO },		/* LED2 MiniPCI LED (front panel) */
+	{ 11, MPP_GPIO },		/* Lifeline control */
+	{ 12, MPP_GIGE },		/* GE_TXD[4] */
+	{ 13, MPP_GIGE },		/* GE_TXD[5] */
+	{ 14, MPP_GIGE },		/* GE_TXD[6] */
+	{ 15, MPP_GIGE },		/* GE_TXD[7] */
+	{ 16, MPP_GIGE },		/* GE_RXD[4] */
+	{ 17, MPP_GIGE },		/* GE_RXD[5] */
+	{ 18, MPP_GIGE },		/* GE_RXD[6] */
+	{ 19, MPP_GIGE },		/* GE_RXD[7] */
+	{ -1 },
+};
+
+static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
+	.phy_addr	= -1,
+};
+
+static void __init rd88f5181l_fxo_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
+				   RD88F5181L_FXO_NOR_BOOT_SIZE);
+	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
+}
+
+static int __init
+rd88f5181l_fxo_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * Mini-PCI / Cardbus slot.
+	 */
+	return gpio_to_irq(1);
+}
+
+static struct hw_pci rd88f5181l_fxo_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= rd88f5181l_fxo_pci_map_irq,
+};
+
+static int __init rd88f5181l_fxo_pci_init(void)
+{
+	if (machine_is_rd88f5181l_fxo()) {
+		orion5x_pci_set_cardbus_mode();
+		pci_common_init(&rd88f5181l_fxo_pci);
+	}
+
+	return 0;
+}
+subsys_initcall(rd88f5181l_fxo_pci_init);
+
+MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
+	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= rd88f5181l_fxo_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
new file mode 100644
index 000000000000..b56447d32e17
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+ *
+ * Marvell Orion-VoIP GE Reference Design Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * RD-88F5181L GE Info
+ ****************************************************************************/
+/*
+ * 16M NOR flash Device bus boot chip select
+ */
+#define RD88F5181L_GE_NOR_BOOT_BASE		0xff000000
+#define RD88F5181L_GE_NOR_BOOT_SIZE		SZ_16M
+
+
+/*****************************************************************************
+ * 16M NOR Flash on Device bus Boot chip select
+ ****************************************************************************/
+static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
+	.width		= 1,
+};
+
+static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= RD88F5181L_GE_NOR_BOOT_BASE,
+	.end		= RD88F5181L_GE_NOR_BOOT_BASE +
+			  RD88F5181L_GE_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device rd88f5181l_ge_nor_boot_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &rd88f5181l_ge_nor_boot_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &rd88f5181l_ge_nor_boot_flash_resource,
+};
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* LED1 */
+	{  1, MPP_GPIO },		/* LED5 */
+	{  2, MPP_GPIO },		/* LED4 */
+	{  3, MPP_GPIO },		/* LED3 */
+	{  4, MPP_GPIO },		/* PCI_intA */
+	{  5, MPP_GPIO },		/* RTC interrupt */
+	{  6, MPP_PCI_CLK },		/* CPU PCI refclk */
+	{  7, MPP_PCI_CLK },		/* PCI/PCIe refclk */
+	{  8, MPP_GPIO },		/* 88e6131 interrupt */
+	{  9, MPP_GPIO },		/* GE_RXERR */
+	{ 10, MPP_GPIO },		/* PCI_intB */
+	{ 11, MPP_GPIO },		/* LED2 */
+	{ 12, MPP_GIGE },		/* GE_TXD[4] */
+	{ 13, MPP_GIGE },		/* GE_TXD[5] */
+	{ 14, MPP_GIGE },		/* GE_TXD[6] */
+	{ 15, MPP_GIGE },		/* GE_TXD[7] */
+	{ 16, MPP_GIGE },		/* GE_RXD[4] */
+	{ 17, MPP_GIGE },		/* GE_RXD[5] */
+	{ 18, MPP_GIGE },		/* GE_RXD[6] */
+	{ 19, MPP_GIGE },		/* GE_RXD[7] */
+	{ -1 },
+};
+
+static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
+	.phy_addr	= -1,
+};
+
+static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+static void __init rd88f5181l_ge_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&rd88f5181l_ge_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
+				   RD88F5181L_GE_NOR_BOOT_SIZE);
+	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
+
+	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
+}
+
+static int __init
+rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * Cardbus slot.
+	 */
+	if (pin == 1)
+		return gpio_to_irq(4);
+	else
+		return gpio_to_irq(10);
+}
+
+static struct hw_pci rd88f5181l_ge_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= rd88f5181l_ge_pci_map_irq,
+};
+
+static int __init rd88f5181l_ge_pci_init(void)
+{
+	if (machine_is_rd88f5181l_ge()) {
+		orion5x_pci_set_cardbus_mode();
+		pci_common_init(&rd88f5181l_ge_pci);
+	}
+
+	return 0;
+}
+subsys_initcall(rd88f5181l_ge_pci_init);
+
+MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= rd88f5181l_ge_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 81abc1003aae..10ae62864269 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -26,6 +26,7 @@
 #include <asm/mach/pci.h>
 #include <asm/arch/orion5x.h>
 #include "common.h"
+#include "mpp.h"
 
 /*****************************************************************************
  * RD-88F5182 Info
@@ -125,6 +126,7 @@ static int __init rd88f5182_dbgled_init(void)
 
 		leds_event = rd88f5182_dbgled_event;
 	}
+
 	return 0;
 }
 
@@ -220,7 +222,6 @@ subsys_initcall(rd88f5182_pci_init);
 
 static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
 	.phy_addr	= 8,
-	.force_phy_addr = 1,
 };
 
 /*****************************************************************************
@@ -234,15 +235,34 @@ static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
  * Sata
  ****************************************************************************/
 static struct mv_sata_platform_data rd88f5182_sata_data = {
-	.n_ports        = 2,
+	.n_ports	= 2,
 };
 
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-
-static struct platform_device *rd88f5182_devices[] __initdata = {
-	&rd88f5182_nor_flash,
+static struct orion5x_mpp_mode rd88f5182_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* Debug Led */
+	{  1, MPP_GPIO },		/* Reset Switch */
+	{  2, MPP_UNUSED },
+	{  3, MPP_GPIO },		/* RTC Int */
+	{  4, MPP_GPIO },
+	{  5, MPP_GPIO },
+	{  6, MPP_GPIO },		/* PCI_intA */
+	{  7, MPP_GPIO },		/* PCI_intB */
+	{  8, MPP_UNUSED },
+	{  9, MPP_UNUSED },
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },		/* SATA 0 presence */
+	{ 13, MPP_SATA_LED },		/* SATA 1 presence */
+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
 };
 
 static void __init rd88f5182_init(void)
@@ -252,35 +272,9 @@ static void __init rd88f5182_init(void)
 	 */
 	orion5x_init();
 
-	/*
-	 * Setup the CPU address decode windows for our devices
-	 */
-	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
-				RD88F5182_NOR_BOOT_SIZE);
-	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
-
-	/*
-	 * Open a special address decode windows for the PCIe WA.
-	 */
-	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-				ORION5X_PCIE_WA_SIZE);
+	orion5x_mpp_conf(rd88f5182_mpp_modes);
 
 	/*
-	 * Setup Multiplexing Pins --
-	 * MPP[0] Debug Led (GPIO - Out)
-	 * MPP[1] Debug Led (GPIO - Out)
-	 * MPP[2] N/A
-	 * MPP[3] RTC_Int (GPIO - In)
-	 * MPP[4] GPIO
-	 * MPP[5] GPIO
-	 * MPP[6] PCI_intA (GPIO - In)
-	 * MPP[7] PCI_intB (GPIO - In)
-	 * MPP[8-11] N/A
-	 * MPP[12] SATA 0 presence Indication
-	 * MPP[13] SATA 1 presence Indication
-	 * MPP[14] SATA 0 active Indication
-	 * MPP[15] SATA 1 active indication
-	 * MPP[16-19] Not used
 	 * MPP[20] PCI Clock to MV88F5182
 	 * MPP[21] PCI Clock to mini PCI CON11
 	 * MPP[22] USB 0 over current indication
@@ -289,16 +283,23 @@ static void __init rd88f5182_init(void)
 	 * MPP[25] USB 0 over current enable
 	 */
 
-	orion5x_write(MPP_0_7_CTRL, 0x00000003);
-	orion5x_write(MPP_8_15_CTRL, 0x55550000);
-	orion5x_write(MPP_16_19_CTRL, 0x5555);
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&rd88f5182_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&rd88f5182_sata_data);
+	orion5x_uart0_init();
 
-	orion5x_gpio_set_valid_pins(0x000000fb);
+	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
+				   RD88F5182_NOR_BOOT_SIZE);
+
+	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
+	platform_device_register(&rd88f5182_nor_flash);
 
-	platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
 	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
-	orion5x_eth_init(&rd88f5182_eth_data);
-	orion5x_sata_init(&rd88f5182_sata_data);
 }
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 9afb41ee6e07..a9cef9703d5b 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -28,6 +28,8 @@
 #include <asm/mach/pci.h>
 #include <asm/arch/orion5x.h>
 #include "common.h"
+#include "mpp.h"
+#include "tsx09-common.h"
 
 #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
 #define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
@@ -47,52 +49,54 @@
  ***************************************************************************/
 static struct mtd_partition qnap_ts209_partitions[] = {
 	{
-		.name       = "U-Boot",
-		.size       = 0x00080000,
-		.offset     = 0x00780000,
-		.mask_flags = MTD_WRITEABLE,
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0x00780000,
+		.mask_flags	= MTD_WRITEABLE,
 	}, {
-		.name   = "Kernel",
-		.size   = 0x00200000,
-		.offset = 0,
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0,
 	}, {
-		.name   = "RootFS1",
-		.size   = 0x00400000,
-		.offset = 0x00200000,
+		.name		= "RootFS1",
+		.size		= 0x00400000,
+		.offset		= 0x00200000,
 	}, {
-		.name   = "RootFS2",
-		.size   = 0x00100000,
-		.offset = 0x00600000,
+		.name		= "RootFS2",
+		.size		= 0x00100000,
+		.offset		= 0x00600000,
 	}, {
-		.name   = "U-Boot Config",
-		.size   = 0x00020000,
-		.offset = 0x00760000,
+		.name		= "U-Boot Config",
+		.size		= 0x00020000,
+		.offset		= 0x00760000,
 	}, {
-		.name       = "NAS Config",
-		.size       = 0x00060000,
-		.offset     = 0x00700000,
-		.mask_flags = MTD_WRITEABLE,
-	}
+		.name		= "NAS Config",
+		.size		= 0x00060000,
+		.offset		= 0x00700000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
 };
 
 static struct physmap_flash_data qnap_ts209_nor_flash_data = {
-	.width    = 1,
-	.parts    = qnap_ts209_partitions,
-	.nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
+	.width		= 1,
+	.parts		= qnap_ts209_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_ts209_partitions)
 };
 
 static struct resource qnap_ts209_nor_flash_resource = {
-	.flags = IORESOURCE_MEM,
-	.start = QNAP_TS209_NOR_BOOT_BASE,
-	.end   = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+	.start	= QNAP_TS209_NOR_BOOT_BASE,
+	.end	= QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
 };
 
 static struct platform_device qnap_ts209_nor_flash = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev           = { .platform_data = &qnap_ts209_nor_flash_data, },
-	.resource      = &qnap_ts209_nor_flash_resource,
-	.num_resources = 1,
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts209_nor_flash_data,
+	},
+	.resource	= &qnap_ts209_nor_flash_resource,
+	.num_resources	= 1,
 };
 
 /*****************************************************************************
@@ -164,12 +168,12 @@ static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci qnap_ts209_pci __initdata = {
-	.nr_controllers = 2,
-	.preinit        = qnap_ts209_pci_preinit,
-	.swizzle        = pci_std_swizzle,
-	.setup          = orion5x_pci_sys_setup,
-	.scan           = orion5x_pci_sys_scan_bus,
-	.map_irq        = qnap_ts209_pci_map_irq,
+	.nr_controllers	= 2,
+	.preinit	= qnap_ts209_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= qnap_ts209_pci_map_irq,
 };
 
 static int __init qnap_ts209_pci_init(void)
@@ -183,96 +187,6 @@ static int __init qnap_ts209_pci_init(void)
 subsys_initcall(qnap_ts209_pci_init);
 
 /*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
-	.phy_addr       = 8,
-	.force_phy_addr = 1,
-};
-
-static int __init parse_hex_nibble(char n)
-{
-	if (n >= '0' && n <= '9')
-		return n - '0';
-
-	if (n >= 'A' && n <= 'F')
-		return n - 'A' + 10;
-
-	if (n >= 'a' && n <= 'f')
-		return n - 'a' + 10;
-
-	return -1;
-}
-
-static int __init parse_hex_byte(const char *b)
-{
-	int hi;
-	int lo;
-
-	hi = parse_hex_nibble(b[0]);
-	lo = parse_hex_nibble(b[1]);
-
-	if (hi < 0 || lo < 0)
-		return -1;
-
-	return (hi << 4) | lo;
-}
-
-static int __init check_mac_addr(const char *addr_str)
-{
-	u_int8_t addr[6];
-	int i;
-
-	for (i = 0; i < 6; i++) {
-		int byte;
-
-		/*
-		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
-		 */
-		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
-			return -1;
-
-		byte = parse_hex_byte(addr_str + (i * 3));
-		if (byte < 0)
-			return -1;
-		addr[i] = byte;
-	}
-
-	printk(KERN_INFO "ts209: found ethernet mac address ");
-	for (i = 0; i < 6; i++)
-		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
-	memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
-
-	return 0;
-}
-
-/*
- * The 'NAS Config' flash partition has an ext2 filesystem which
- * contains a file that has the ethernet MAC address in plain text
- * (format "xx:xx:xx:xx:xx:xx\n".)
- */
-static void __init ts209_find_mac_addr(void)
-{
-	unsigned long addr;
-
-	for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
-		char *nor_page;
-		int ret = 0;
-
-		nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
-		if (nor_page != NULL) {
-			ret = check_mac_addr(nor_page);
-			iounmap(nor_page);
-		}
-
-		if (ret == 0)
-			break;
-	}
-}
-
-/*****************************************************************************
  * RTC S35390A on I2C bus
  ****************************************************************************/
 
@@ -280,7 +194,7 @@ static void __init ts209_find_mac_addr(void)
 
 static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
-       .irq         = 0,
+	.irq	= 0,
 };
 
 /****************************************************************************
@@ -297,70 +211,63 @@ static struct gpio_keys_button qnap_ts209_buttons[] = {
 		.gpio		= QNAP_TS209_GPIO_KEY_MEDIA,
 		.desc		= "USB Copy Button",
 		.active_low	= 1,
-	},
-	{
+	}, {
 		.code		= KEY_POWER,
 		.gpio		= QNAP_TS209_GPIO_KEY_RESET,
 		.desc		= "Reset Button",
 		.active_low	= 1,
-	}
+	},
 };
 
 static struct gpio_keys_platform_data qnap_ts209_button_data = {
 	.buttons	= qnap_ts209_buttons,
-	.nbuttons       = ARRAY_SIZE(qnap_ts209_buttons),
+	.nbuttons	= ARRAY_SIZE(qnap_ts209_buttons),
 };
 
 static struct platform_device qnap_ts209_button_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.num_resources	= 0,
-	.dev		= { .platform_data  = &qnap_ts209_button_data, },
+	.dev		= {
+		.platform_data	= &qnap_ts209_button_data,
+	},
 };
 
 /*****************************************************************************
  * SATA
  ****************************************************************************/
 static struct mv_sata_platform_data qnap_ts209_sata_data = {
-	.n_ports        = 2,
+	.n_ports	= 2,
 };
 
 /*****************************************************************************
 
  * General Setup
  ****************************************************************************/
-
-static struct platform_device *qnap_ts209_devices[] __initdata = {
-	&qnap_ts209_nor_flash,
-	&qnap_ts209_button_device,
+static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = {
+	{  0, MPP_UNUSED },
+	{  1, MPP_GPIO },		/* USB copy button */
+	{  2, MPP_GPIO },		/* Load defaults button */
+	{  3, MPP_GPIO },		/* GPIO RTC */
+	{  4, MPP_UNUSED },
+	{  5, MPP_UNUSED },
+	{  6, MPP_GPIO },		/* PCI Int A */
+	{  7, MPP_GPIO },		/* PCI Int B */
+	{  8, MPP_UNUSED },
+	{  9, MPP_UNUSED },
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },		/* SATA 0 presence */
+	{ 13, MPP_SATA_LED },		/* SATA 1 presence */
+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
+	{ 16, MPP_UART },		/* UART1 RXD */
+	{ 17, MPP_UART },		/* UART1 TXD */
+	{ 18, MPP_GPIO },		/* SW_RST */
+	{ 19, MPP_UNUSED },
+	{ -1 },
 };
 
-/*
- * QNAP TS-[12]09 specific power off method via UART1-attached PIC
- */
-
-#define UART1_REG(x)  (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static void qnap_ts209_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack uart1 and reset into sane state (19200,8n1) */
-	orion5x_write(UART1_REG(LCR), 0x83);
-	orion5x_write(UART1_REG(DLL), divisor & 0xff);
-	orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
-	orion5x_write(UART1_REG(LCR), 0x03);
-	orion5x_write(UART1_REG(IER), 0x00);
-	orion5x_write(UART1_REG(FCR), 0x00);
-	orion5x_write(UART1_REG(MCR), 0x00);
-
-	/* send the power-off command 'A' to PIC */
-	orion5x_write(UART1_REG(TX), 'A');
-}
-
 static void __init qnap_ts209_init(void)
 {
 	/*
@@ -368,51 +275,33 @@ static void __init qnap_ts209_init(void)
 	 */
 	orion5x_init();
 
-	/*
-	 * Setup flash mapping
-	 */
-	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
-			    QNAP_TS209_NOR_BOOT_SIZE);
-
-	/*
-	 * Open a special address decode windows for the PCIe WA.
-	 */
-	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-				ORION5X_PCIE_WA_SIZE);
+	orion5x_mpp_conf(ts209_mpp_modes);
 
 	/*
-	 * Setup Multiplexing Pins --
-	 * MPP[0] Reserved
-	 * MPP[1] USB copy button (0 active)
-	 * MPP[2] Load defaults button (0 active)
-	 * MPP[3] GPIO RTC
-	 * MPP[4-5] Reserved
-	 * MPP[6] PCI Int A
-	 * MPP[7] PCI Int B
-	 * MPP[8-11] Reserved
-	 * MPP[12] SATA 0 presence
-	 * MPP[13] SATA 1 presence
-	 * MPP[14] SATA 0 active
-	 * MPP[15] SATA 1 active
-	 * MPP[16] UART1 RXD
-	 * MPP[17] UART1 TXD
-	 * MPP[18] SW_RST (0 active)
-	 * MPP[19] Reserved
 	 * MPP[20] PCI clock 0
 	 * MPP[21] PCI clock 1
 	 * MPP[22] USB 0 over current
 	 * MPP[23-25] Reserved
 	 */
-	orion5x_write(MPP_0_7_CTRL, 0x3);
-	orion5x_write(MPP_8_15_CTRL, 0x55550000);
-	orion5x_write(MPP_16_19_CTRL, 0x5500);
-	orion5x_gpio_set_valid_pins(0x3cc0fff);
 
-	/* register ts209 specific power-off method */
-	pm_power_off = qnap_ts209_power_off;
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
+				 qnap_ts209_partitions[5].offset,
+				 qnap_ts209_partitions[5].size);
+	orion5x_eth_init(&qnap_tsx09_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&qnap_ts209_sata_data);
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+				   QNAP_TS209_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts209_nor_flash);
 
-	platform_add_devices(qnap_ts209_devices,
-				ARRAY_SIZE(qnap_ts209_devices));
+	platform_device_register(&qnap_ts209_button_device);
 
 	/* Get RTC IRQ and register the chip */
 	if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
@@ -425,14 +314,12 @@ static void __init qnap_ts209_init(void)
 		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
-	ts209_find_mac_addr();
-	orion5x_eth_init(&qnap_ts209_eth_data);
-
-	orion5x_sata_init(&qnap_ts209_sata_data);
+	/* register tsx09 specific power-off method */
+	pm_power_off = qnap_tsx09_power_off;
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
-	/* Maintainer:  Byron Bradley <byron.bbradley@gmail.com> */
+	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
 	.phys_io	= ORION5X_REGS_PHYS_BASE,
 	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
new file mode 100644
index 000000000000..32f0ff073b7e
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -0,0 +1,273 @@
+/*
+ * QNAP TS-409 Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx09-common.h"
+
+/*****************************************************************************
+ * QNAP TS-409 Info
+ ****************************************************************************/
+
+/*
+ * QNAP TS-409 hardware :
+ * - Marvell 88F5281-D0
+ * - Marvell 88SX7042 SATA controller (PCIe)
+ * - Marvell 88E1118 Gigabit Ethernet PHY
+ * - RTC S35390A (@0x30) on I2C bus
+ * - 8MB NOR flash
+ * - 256MB of DDR-2 RAM
+ */
+
+/*
+ * 8MB NOR flash Device bus boot chip select
+ */
+
+#define QNAP_TS409_NOR_BOOT_BASE 0xff800000
+#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M
+
+/****************************************************************************
+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     existing QNAP firmware.
+ *
+ * Layout as used by QNAP:
+ *  [2] 0x00000000-0x00200000 : "Kernel"
+ *  [3] 0x00200000-0x00600000 : "RootFS1"
+ *  [4] 0x00600000-0x00700000 : "RootFS2"
+ *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
+ *  [5] 0x00760000-0x00780000 : "U-Boot Config"
+ *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
+ ***************************************************************************/
+static struct mtd_partition qnap_ts409_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0x00780000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00400000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00100000,
+		.offset		= 0x00600000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00020000,
+		.offset		= 0x00760000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00060000,
+		.offset		= 0x00700000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data qnap_ts409_nor_flash_data = {
+	.width		= 1,
+	.parts		= qnap_ts409_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_ts409_partitions)
+};
+
+static struct resource qnap_ts409_nor_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= QNAP_TS409_NOR_BOOT_BASE,
+	.end	= QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device qnap_ts409_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= { .platform_data = &qnap_ts409_nor_flash_data, },
+	.num_resources	= 1,
+	.resource	= &qnap_ts409_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI isn't used on the TS-409
+	 */
+	return -1;
+}
+
+static struct hw_pci qnap_ts409_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= qnap_ts409_pci_map_irq,
+};
+
+static int __init qnap_ts409_pci_init(void)
+{
+	if (machine_is_ts409())
+		pci_common_init(&qnap_ts409_pci);
+
+	return 0;
+}
+
+subsys_initcall(qnap_ts409_pci_init);
+
+/*****************************************************************************
+ * RTC S35390A on I2C bus
+ ****************************************************************************/
+
+#define TS409_RTC_GPIO	10
+
+static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ *     Power button is attached to the PIC microcontroller
+ ****************************************************************************/
+
+#define QNAP_TS409_GPIO_KEY_MEDIA	15
+
+static struct gpio_keys_button qnap_ts409_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= QNAP_TS409_GPIO_KEY_MEDIA,
+		.desc		= "USB Copy Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts409_button_data = {
+	.buttons	= qnap_ts409_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts409_buttons),
+};
+
+static struct platform_device qnap_ts409_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts409_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = {
+	{  0, MPP_UNUSED },
+	{  1, MPP_UNUSED },
+	{  2, MPP_UNUSED },
+	{  3, MPP_UNUSED },
+	{  4, MPP_GPIO },		/* HDD 1 status */
+	{  5, MPP_GPIO },		/* HDD 2 status */
+	{  6, MPP_GPIO },		/* HDD 3 status */
+	{  7, MPP_GPIO },		/* HDD 4 status */
+	{  8, MPP_UNUSED },
+	{  9, MPP_UNUSED },
+	{ 10, MPP_GPIO },		/* RTC int */
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_UNUSED },
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_GPIO },		/* SW_RST */
+	{ 15, MPP_GPIO },		/* USB copy button */
+	{ 16, MPP_UART },		/* UART1 RXD */
+	{ 17, MPP_UART },		/* UART1 TXD */
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
+};
+
+static void __init qnap_ts409_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(ts409_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
+				 qnap_ts409_partitions[5].offset,
+				 qnap_ts409_partitions[5].size);
+	orion5x_eth_init(&qnap_tsx09_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
+				   QNAP_TS409_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts409_nor_flash);
+
+	platform_device_register(&qnap_ts409_button_device);
+
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(TS409_RTC_GPIO) == 0)
+			qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
+		else
+			gpio_free(TS409_RTC_GPIO);
+	}
+	if (qnap_ts409_i2c_rtc.irq == 0)
+		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+
+	/* register tsx09 specific power-off method */
+	pm_power_off = qnap_tsx09_power_off;
+}
+
+MACHINE_START(TS409, "QNAP TS-409")
+	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= qnap_ts409_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
new file mode 100644
index 000000000000..77e9f351f07a
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -0,0 +1,277 @@
+/*
+ * arch/arm/mach-orion5x/ts78xx-setup.c
+ *
+ * Maintainer: Alexander Clouter <alex@digriz.org.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/m48t86.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * TS-78xx Info
+ ****************************************************************************/
+
+/*
+ * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE
+ */
+#define TS78XX_FPGA_REGS_PHYS_BASE	0xe8000000
+#define TS78XX_FPGA_REGS_VIRT_BASE	0xff900000
+#define TS78XX_FPGA_REGS_SIZE		SZ_1M
+
+#define TS78XX_FPGA_REGS_SYSCON_ID	(TS78XX_FPGA_REGS_VIRT_BASE | 0x000)
+#define TS78XX_FPGA_REGS_SYSCON_LCDI	(TS78XX_FPGA_REGS_VIRT_BASE | 0x004)
+#define TS78XX_FPGA_REGS_SYSCON_LCDO	(TS78XX_FPGA_REGS_VIRT_BASE | 0x008)
+
+#define TS78XX_FPGA_REGS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
+#define TS78XX_FPGA_REGS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
+
+/*
+ * 512kB NOR flash Device
+ */
+#define TS78XX_NOR_BOOT_BASE		0xff800000
+#define TS78XX_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc ts78xx_io_desc[] __initdata = {
+	{
+		.virtual	= TS78XX_FPGA_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE),
+		.length		= TS78XX_FPGA_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init ts78xx_map_io(void)
+{
+	orion5x_map_io();
+	iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc));
+}
+
+/*****************************************************************************
+ * 512kB NOR Boot Flash - the chip is a M25P40
+ ****************************************************************************/
+static struct mtd_partition ts78xx_nor_boot_flash_resources[] = {
+	{
+		.name		= "ts-bootrom",
+		.offset		= 0,
+		/* only the first 256kB is used */
+		.size		= SZ_256K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data ts78xx_nor_boot_flash_data = {
+	.width		= 1,
+	.parts		= ts78xx_nor_boot_flash_resources,
+	.nr_parts	= ARRAY_SIZE(ts78xx_nor_boot_flash_resources),
+};
+
+static struct resource ts78xx_nor_boot_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= TS78XX_NOR_BOOT_BASE,
+	.end		= TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ts78xx_nor_boot_flash = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_nor_boot_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &ts78xx_nor_boot_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data ts78xx_eth_data = {
+	.phy_addr	= 0,
+	.force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
+ ****************************************************************************/
+#ifdef CONFIG_RTC_DRV_M48T86
+static unsigned char ts78xx_rtc_readbyte(unsigned long addr)
+{
+	writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
+	return readb(TS78XX_FPGA_REGS_RTC_DATA);
+}
+
+static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr)
+{
+	writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
+	writeb(value, TS78XX_FPGA_REGS_RTC_DATA);
+}
+
+static struct m48t86_ops ts78xx_rtc_ops = {
+	.readbyte	= ts78xx_rtc_readbyte,
+	.writebyte	= ts78xx_rtc_writebyte,
+};
+
+static struct platform_device ts78xx_rtc_device = {
+	.name		= "rtc-m48t86",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_rtc_ops,
+	},
+	.num_resources	= 0,
+};
+
+/*
+ * TS uses some of the user storage space on the RTC chip so see if it is
+ * present; as it's an optional feature at purchase time and not all boards
+ * will have it present
+ *
+ * I've used the method TS use in their rtc7800.c example for the detection
+ *
+ * TODO: track down a guinea pig without an RTC to see if we can work out a
+ * 		better RTC detection routine
+ */
+static int __init ts78xx_rtc_init(void)
+{
+	unsigned char tmp_rtc0, tmp_rtc1;
+
+	tmp_rtc0 = ts78xx_rtc_readbyte(126);
+	tmp_rtc1 = ts78xx_rtc_readbyte(127);
+
+	ts78xx_rtc_writebyte(0x00, 126);
+	ts78xx_rtc_writebyte(0x55, 127);
+	if (ts78xx_rtc_readbyte(127) == 0x55) {
+		ts78xx_rtc_writebyte(0xaa, 127);
+		if (ts78xx_rtc_readbyte(127) == 0xaa
+				&& ts78xx_rtc_readbyte(126) == 0x00) {
+			ts78xx_rtc_writebyte(tmp_rtc0, 126);
+			ts78xx_rtc_writebyte(tmp_rtc1, 127);
+			platform_device_register(&ts78xx_rtc_device);
+			return 1;
+		}
+	}
+
+	return 0;
+};
+#else
+static int __init ts78xx_rtc_init(void)
+{
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ts78xx_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * print some information regarding the board
+ ****************************************************************************/
+static void __init ts78xx_print_board_id(void)
+{
+	unsigned int board_info;
+
+	board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID);
+	printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ",
+				board_info & 0xff,
+				(board_info >> 8) & 0xffffff);
+	board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI);
+	printk("JP1=%d, JP2=%d\n",
+				(board_info >> 30) & 0x1,
+				(board_info >> 31) & 0x1);
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = {
+	{  0, MPP_UNUSED },
+	{  1, MPP_GPIO },		/* JTAG Clock */
+	{  2, MPP_GPIO },		/* JTAG Data In */
+	{  3, MPP_GPIO },		/* Lat ECP2 256 FPGA - PB2B */
+	{  4, MPP_GPIO },		/* JTAG Data Out */
+	{  5, MPP_GPIO },		/* JTAG TMS */
+	{  6, MPP_GPIO },		/* Lat ECP2 256 FPGA - PB31A_CLK4+ */
+	{  7, MPP_GPIO },		/* Lat ECP2 256 FPGA - PB22B */
+	{  8, MPP_UNUSED },
+	{  9, MPP_UNUSED },
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_UNUSED },
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_UNUSED },
+	{ 15, MPP_UNUSED },
+	{ 16, MPP_UART },
+	{ 17, MPP_UART },
+	{ 18, MPP_UART },
+	{ 19, MPP_UART },
+	{ -1 },
+};
+
+static void __init ts78xx_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	ts78xx_print_board_id();
+
+	orion5x_mpp_conf(ts78xx_mpp_modes);
+
+	/*
+	 * MPP[20] PCI Clock Out 1
+	 * MPP[21] PCI Clock Out 0
+	 * MPP[22] Unused
+	 * MPP[23] Unused
+	 * MPP[24] Unused
+	 * MPP[25] Unused
+	 */
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&ts78xx_eth_data);
+	orion5x_sata_init(&ts78xx_sata_data);
+	orion5x_uart0_init();
+	orion5x_uart1_init();
+
+	orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
+				   TS78XX_NOR_BOOT_SIZE);
+	platform_device_register(&ts78xx_nor_boot_flash);
+
+	if (!ts78xx_rtc_init())
+		printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
+}
+
+MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
+	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= ts78xx_init,
+	.map_io		= ts78xx_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
new file mode 100644
index 000000000000..83feac3147a6
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -0,0 +1,133 @@
+/*
+ * QNAP TS-x09 Boards common functions
+ *
+ * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
+ *		Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/timex.h>
+#include <linux/serial_reg.h>
+#include "tsx09-common.h"
+
+/*****************************************************************************
+ * QNAP TS-x09 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx09_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack uart1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
+	.phy_addr	= 8,
+};
+
+static int __init qnap_tsx09_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init qnap_tsx09_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = qnap_tsx09_parse_hex_nibble(b[0]);
+	lo = qnap_tsx09_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
+{
+	u_int8_t addr[6];
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		int byte;
+
+		/*
+		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+		 */
+		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+			return -1;
+
+		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
+		if (byte < 0)
+			return -1;
+		addr[i] = byte;
+	}
+
+	printk(KERN_INFO "tsx09: found ethernet mac address ");
+	for (i = 0; i < 6; i++)
+		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+	memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
+
+	return 0;
+}
+
+/*
+ * The 'NAS Config' flash partition has an ext2 filesystem which
+ * contains a file that has the ethernet MAC address in plain text
+ * (format "xx:xx:xx:xx:xx:xx\n").
+ */
+void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
+{
+	unsigned long addr;
+
+	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
+		char *nor_page;
+		int ret = 0;
+
+		nor_page = ioremap(addr, 1024);
+		if (nor_page != NULL) {
+			ret = qnap_tsx09_check_mac_addr(nor_page);
+			iounmap(nor_page);
+		}
+
+		if (ret == 0)
+			break;
+	}
+}
diff --git a/arch/arm/mach-orion5x/tsx09-common.h b/arch/arm/mach-orion5x/tsx09-common.h
new file mode 100644
index 000000000000..0984264616f0
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.h
@@ -0,0 +1,20 @@
+#ifndef __ARCH_ORION5X_TSX09_COMMON_H
+#define __ARCH_ORION5X_TSX09_COMMON_H
+
+/*
+ * QNAP TS-x09 Boards power-off function
+ */
+extern void qnap_tsx09_power_off(void);
+
+/*
+ * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory
+ */
+extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size);
+
+/*
+ * QNAP TS-x09 Boards ethernet declaration
+ */
+extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data;
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
new file mode 100644
index 000000000000..1af093ff8cf3
--- /dev/null
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-orion5x/wnr854t-setup.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct orion5x_mpp_mode wnr854t_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* Power LED green (0=on) */
+	{  1, MPP_GPIO },		/* Reset Button (0=off) */
+	{  2, MPP_GPIO },		/* Power LED blink (0=off) */
+	{  3, MPP_GPIO },		/* WAN Status LED amber (0=off) */
+	{  4, MPP_GPIO },		/* PCI int */
+	{  5, MPP_GPIO },		/* ??? */
+	{  6, MPP_GPIO },		/* ??? */
+	{  7, MPP_GPIO },		/* ??? */
+	{  8, MPP_UNUSED },		/* ??? */
+	{  9, MPP_GIGE },		/* GE_RXERR */
+	{ 10, MPP_UNUSED },		/* ??? */
+	{ 11, MPP_UNUSED },		/* ??? */
+	{ 12, MPP_GIGE },		/* GE_TXD[4] */
+	{ 13, MPP_GIGE },		/* GE_TXD[5] */
+	{ 14, MPP_GIGE },		/* GE_TXD[6] */
+	{ 15, MPP_GIGE },		/* GE_TXD[7] */
+	{ 16, MPP_GIGE },		/* GE_RXD[4] */
+	{ 17, MPP_GIGE },		/* GE_RXD[5] */
+	{ 18, MPP_GIGE },		/* GE_RXD[6] */
+	{ 19, MPP_GIGE },		/* GE_RXD[7] */
+	{ -1 },
+};
+
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define WNR854T_NOR_BOOT_BASE	0xf4000000
+#define WNR854T_NOR_BOOT_SIZE	SZ_8M
+
+static struct mtd_partition wnr854t_nor_flash_partitions[] = {
+	{
+		.name		= "kernel",
+		.offset		= 0x00000000,
+		.size		= 0x00100000,
+	}, {
+		.name		= "rootfs",
+		.offset		= 0x00100000,
+		.size		= 0x00660000,
+	}, {
+		.name		= "uboot",
+		.offset		= 0x00760000,
+		.size		= 0x00040000,
+	},
+};
+
+static struct physmap_flash_data wnr854t_nor_flash_data = {
+	.width		= 2,
+	.parts		= wnr854t_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(wnr854t_nor_flash_partitions),
+};
+
+static struct resource wnr854t_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= WNR854T_NOR_BOOT_BASE,
+	.end		= WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device wnr854t_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &wnr854t_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &wnr854t_nor_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data wnr854t_eth_data = {
+	.phy_addr	= -1,
+};
+
+static void __init wnr854t_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(wnr854t_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_eth_init(&wnr854t_eth_data);
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
+				   WNR854T_NOR_BOOT_SIZE);
+	platform_device_register(&wnr854t_nor_flash);
+}
+
+static int __init wnr854t_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * Mini-PCI slot.
+	 */
+	if (slot == 7)
+		return gpio_to_irq(4);
+
+	return -1;
+}
+
+static struct hw_pci wnr854t_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= wnr854t_pci_map_irq,
+};
+
+static int __init wnr854t_pci_init(void)
+{
+	if (machine_is_wnr854t())
+		pci_common_init(&wnr854t_pci);
+
+	return 0;
+}
+subsys_initcall(wnr854t_pci_init);
+
+MACHINE_START(WNR854T, "Netgear WNR854T")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= wnr854t_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
new file mode 100644
index 000000000000..aeab55c6a82d
--- /dev/null
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-orion5x/wrt350n-v2-setup.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* Power LED green (0=on) */
+	{  1, MPP_GPIO },		/* Security LED (0=on) */
+	{  2, MPP_GPIO },		/* Internal Button (0=on) */
+	{  3, MPP_GPIO },		/* Reset Button (0=on) */
+	{  4, MPP_GPIO },		/* PCI int */
+	{  5, MPP_GPIO },		/* Power LED orange (0=on) */
+	{  6, MPP_GPIO },		/* USB LED (0=on) */
+	{  7, MPP_GPIO },		/* Wireless LED (0=on) */
+	{  8, MPP_UNUSED },		/* ??? */
+	{  9, MPP_GIGE },		/* GE_RXERR */
+	{ 10, MPP_UNUSED },		/* ??? */
+	{ 11, MPP_UNUSED },		/* ??? */
+	{ 12, MPP_GIGE },		/* GE_TXD[4] */
+	{ 13, MPP_GIGE },		/* GE_TXD[5] */
+	{ 14, MPP_GIGE },		/* GE_TXD[6] */
+	{ 15, MPP_GIGE },		/* GE_TXD[7] */
+	{ 16, MPP_GIGE },		/* GE_RXD[4] */
+	{ 17, MPP_GIGE },		/* GE_RXD[5] */
+	{ 18, MPP_GIGE },		/* GE_RXD[6] */
+	{ 19, MPP_GIGE },		/* GE_RXD[7] */
+	{ -1 },
+};
+
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define WRT350N_V2_NOR_BOOT_BASE	0xf4000000
+#define WRT350N_V2_NOR_BOOT_SIZE	SZ_8M
+
+static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
+	{
+		.name		= "kernel",
+		.offset		= 0x00000000,
+		.size		= 0x00760000,
+	}, {
+		.name		= "rootfs",
+		.offset		= 0x001a0000,
+		.size		= 0x005c0000,
+	}, {
+		.name		= "lang",
+		.offset		= 0x00760000,
+		.size		= 0x00040000,
+	}, {
+		.name		= "nvram",
+		.offset		= 0x007a0000,
+		.size		= 0x00020000,
+	}, {
+		.name		= "u-boot",
+		.offset		= 0x007c0000,
+		.size		= 0x00040000,
+	},
+};
+
+static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
+	.width		= 1,
+	.parts		= wrt350n_v2_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
+};
+
+static struct resource wrt350n_v2_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= WRT350N_V2_NOR_BOOT_BASE,
+	.end		= WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device wrt350n_v2_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &wrt350n_v2_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &wrt350n_v2_nor_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
+	.phy_addr	= -1,
+};
+
+static void __init wrt350n_v2_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(wrt350n_v2_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&wrt350n_v2_eth_data);
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
+				   WRT350N_V2_NOR_BOOT_SIZE);
+	platform_device_register(&wrt350n_v2_nor_flash);
+}
+
+static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * Mini-PCI slot.
+	 */
+	if (slot == 7)
+		return gpio_to_irq(4);
+
+	return -1;
+}
+
+static struct hw_pci wrt350n_v2_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= wrt350n_v2_pci_map_irq,
+};
+
+static int __init wrt350n_v2_pci_init(void)
+{
+	if (machine_is_wrt350n_v2())
+		pci_common_init(&wrt350n_v2_pci);
+
+	return 0;
+}
+subsys_initcall(wrt350n_v2_pci_init);
+
+MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= wrt350n_v2_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 5da7a6820492..e8ee7ec9ff6d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,19 +16,24 @@ config CPU_PXA310
 config CPU_PXA320
 	bool "PXA320 (codename Monahans-P)"
 
+config CPU_PXA930
+	bool "PXA930 (codename Tavor-P)"
+
 endmenu
 
 endif
 
-choice
-	prompt "Select target board"
-
 config ARCH_GUMSTIX
 	bool "Gumstix XScale boards"
 	help
 	  Say Y here if you intend to run this kernel on a
 	  Gumstix Full Function Minature Computer.
 
+config MACH_GUMSTIX_F
+	bool "Basix, Connex, ws-200ax, ws-400ax systems"
+	depends on ARCH_GUMSTIX
+	select PXA25x
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -37,10 +42,12 @@ config ARCH_LUBBOCK
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
+	select HAVE_PWM
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform"
 	select PXA27x
+	select HAVE_PWM
 
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
@@ -57,6 +64,57 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+	select PXA_SSP
+
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
+
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -69,10 +127,19 @@ config MACH_E330
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e330 family PDA.
 
+config MACH_E350
+	bool "Toshiba e350"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
+
 config MACH_E740
 	bool "Toshiba e740"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e740 family PDA.
@@ -81,6 +148,7 @@ config MACH_E750
 	bool "Toshiba e750"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e750 family PDA.
@@ -97,6 +165,7 @@ config MACH_E800
 	bool "Toshiba e800"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
@@ -105,6 +174,10 @@ config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	select PXA27x
 
+config MACH_TRIZEPS4_CONXS
+	bool "ConXS Eval Board"
+	depends on MACH_TRIZEPS4
+
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
@@ -114,14 +187,25 @@ config MACH_COLIBRI
 	select PXA27x
 
 config MACH_ZYLONITE
-	bool "PXA3xx Development Platform"
+	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
+	select HAVE_PWM
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
 	select PXA3xx
 	select PXA_SSP
 
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
+	select PXA930
+
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
+	select PXA930
+
 config MACH_ARMCORE
 	bool "CompuLab CM-X270 modules"
 	select PXA27x
@@ -129,7 +213,6 @@ config MACH_ARMCORE
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	depends on ARCH_PXA
 	select PXA27x
 	select IWMMXT
 
@@ -137,109 +220,81 @@ config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
+	select PXA_SSP
 
-endchoice
+config ARCH_PXA_PALM
+	bool "PXA based Palm PDAs"
+	select HAVE_PWM
 
-choice
-	prompt "Used baseboard"
-	depends on MACH_PCM027
+config MACH_PALMTX
+	bool "Palm T|X"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
-
-endchoice
-
-if PXA_SHARPSL
+	select HAVE_PWM
+	depends on MACH_PCM027
 
 choice
-	prompt "Select target Sharp Zaurus device range"
-
-config PXA_SHARPSL_25x
-	bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
-	select PXA25x
-
-config PXA_SHARPSL_27x
-	bool "Sharp PXA270 models (SL-Cxx00)"
-	select PXA27x
-
-endchoice
+	prompt "display on pcm990"
+	depends on MACH_PCM990_BASEBOARD
 
-endif
+config PCM990_DISPLAY_SHARP
+	bool "sharp lq084v1dg21 stn display"
 
-if ARCH_GUMSTIX
+config PCM990_DISPLAY_NEC
+	bool "nec nl6448bc20_18d tft display"
 
-choice
-	prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
-	bool "Basix, Connex, ws-200ax, ws-400ax systems"
-	select PXA25x
+config PCM990_DISPLAY_NONE
+	bool "no display"
 
 endchoice
 
-endif
 
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
 
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
 
-choice
-	prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_CONXS
-	bool "ConXS Eval Board"
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_ANY
-	bool "another Board"
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
 
-endchoice
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
 
-endif
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
 
 endmenu
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL_25x
-	select SHARP_LOCOMO
-	select PXA_SSP
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL_25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL_25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL_25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL_27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL_27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL_27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL_25x
-
 config PXA25x
 	bool
 	help
@@ -273,4 +328,19 @@ config PXA_SSP
 	tristate
 	help
 	  Enable support for PXA2xx SSP ports
+
+config PXA_PWM
+	tristate
+	default BACKLIGHT_PWM
+	help
+	  Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0e6d05bb81aa..99ecbe7f8506 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,19 +4,21 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
-				   time.o gpio.o
+				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
 
 # Generic drivers that other drivers may depend upon
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
+obj-$(CONFIG_PXA_PWM)		+= pwm.o
 
 # SoC-specific code
-obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
+obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
@@ -35,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740)		+= e740_lcd.o
+obj-$(CONFIG_MACH_E750)		+= e750_lcd.o
+obj-$(CONFIG_MACH_E400)		+= e400_lcd.o
+obj-$(CONFIG_MACH_E800)		+= e800_lcd.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
@@ -43,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -58,3 +68,5 @@ obj-$(CONFIG_LEDS)		+= $(led-y)
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index e97dc59813c8..630063ffa6fc 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,7 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include <asm/hardware.h>
 
@@ -47,6 +47,9 @@ struct clk *clk_get(struct device *dev, const char *id)
 		clk = p;
 	mutex_unlock(&clocks_mutex);
 
+	if (!IS_ERR(clk) && clk->ops == NULL)
+		clk = clk->other;
+
 	return clk;
 }
 EXPORT_SYMBOL(clk_get);
@@ -98,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(struct clk *clk)
-{
-	pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-
 void clk_cken_enable(struct clk *clk)
 {
 	CKEN |= 1 << clk->cken;
@@ -128,14 +116,6 @@ const struct clkops clk_cken_ops = {
 	.disable	= clk_cken_disable,
 };
 
-static struct clk common_clks[] = {
-	{
-		.name		= "GPIO27_CLK",
-		.ops		= &clk_gpio27_ops,
-		.rate		= 3686400,
-	},
-};
-
 void clks_register(struct clk *clks, size_t num)
 {
 	int i;
@@ -145,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
 		list_add(&clks[i].node, &clocks);
 	mutex_unlock(&clocks_mutex);
 }
-
-static int __init clk_init(void)
-{
-	clks_register(common_clks, ARRAY_SIZE(common_clks));
-	return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index bc6b77e1592e..1ec8f9178aaf 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -15,6 +15,7 @@ struct clk {
 	unsigned int		cken;
 	unsigned int		delay;
 	unsigned int		enabled;
+	struct clk		*other;
 };
 
 #define INIT_CKEN(_name, _cken, _rate, _delay, _dev)	\
@@ -35,9 +36,53 @@ struct clk {
 		.cken	= CKEN_##_cken,			\
 	}
 
+/*
+ * This is a placeholder to alias one clock device+name pair
+ * to another struct clk.
+ */
+#define INIT_CKOTHER(_name, _other, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.other	= _other,			\
+	}
+
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
+	{                                               \
+		.name   = _name,                        \
+		.dev    = _dev,                         \
+		.ops    = _ops,                         \
+		.rate   = _rate,                        \
+		.delay	= _delay,			\
+	}
+
 extern const struct clkops clk_cken_ops;
 
 void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
+		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
+	}
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= _ops,				\
+		.cken	= CKEN_##_cken,			\
+	}
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
 void clks_register(struct clk *clks, size_t num);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index ac7f05f9f3eb..bcf0cde6ccc9 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -5,7 +5,7 @@
  *
  * Bits taken from various places.
  *
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
 
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -41,36 +41,39 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
-	pr_info("Adjusting zones for CM-x270\n");
+	if (machine_is_armcore()) {
+		pr_info("Adjusting zones for CM-X270\n");
 
-	/*
-	 * Only adjust if > 64M on current system
-	 */
-	if (node || (zone_size[0] <= sz))
-		return;
-
-	zone_size[1] = zone_size[0] - sz;
-	zone_size[0] = sz;
-	zhole_size[1] = zhole_size[0];
-	zhole_size[0] = 0;
+		/*
+		 * Only adjust if > 64M on current system
+		 */
+		if (node || (zone_size[0] <= sz))
+			return;
+
+		zone_size[1] = zone_size[0] - sz;
+		zone_size[0] = sz;
+		zhole_size[1] = zhole_size[0];
+		zhole_size[0] = 0;
+	}
 }
 
 static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+	GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
 
 	it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
 {
 	it8152_init_irq();
-	pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
-	set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
 
-	set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
-				cmx270_it8152_irq_demux);
+	cmx270_it8152_irq_gpio = irq_gpio;
+
+	set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
+
+	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
@@ -113,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	/*
 	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-x270 is
-	  unrealistic. Here we keep mapping for ATXBase and SB-x270.
+	  but defining a platform for each possible base of CM-X270 is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X270.
 	*/
 	/* ATXBASE PCI slot */
 	if (slot == 7)
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
index ffe37b66f9a0..48f532f4cb51 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
 extern void __cmx270_pci_suspend(void);
 extern void __cmx270_pci_resume(void);
 
 #ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
 #else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
 #endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index f5851d1adc25..402e807eae54 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-pxa/cm-x270.c
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,43 +9,156 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
 #include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
 #include <video/mbxfb.h>
+#include <linux/leds.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
 
 #include <asm/hardware/it8152.h>
 
 #include "generic.h"
 #include "cm-x270-pci.h"
 
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE	(0xe8000000)
+#define CMX270_IT8152_VIRT	(CMX270_VIRT_BASE)
+
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
 #define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
 
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ		(10)
+#define GPIO22_IT8152_IRQ	(22)
+#define GPIO83_MMC_IRQ		(83)
+#define GPIO95_GFXIRQ		(95)
+
+#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ	IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ		IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER	(105)
+
+static unsigned long cmx270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
+	GPIO53_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO89_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO10_GPIO,	/* DM9000 interrupt */
+	GPIO83_GPIO,	/* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
 	[0] = {
 		.start = DM9000_PHYS_BASE,
 		.end   = DM9000_PHYS_BASE + 4,
@@ -63,37 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9k_resource),
-	.resource	= cmx270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
+	.resource	= cmx270_dm9000_resource,
 	.dev		= {
-		.platform_data = &cmx270_dm9k_platdata,
+		.platform_data = &cmx270_dm9000_platdata,
 	}
 };
 
-/* audio device */
-static struct platform_device cmx270_audio_device = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-};
+static void __init cmx270_init_dm9000(void)
+{
+	platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
 
-/* touchscreen controller */
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 static struct platform_device cmx270_ts_device = {
 	.name		= "ucb1400_ts",
 	.id		= -1,
 };
 
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+	platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
 	[0] = {
 		.start = RTC_PHYS_BASE,
@@ -116,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
 	}
 };
 
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+	platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+	[0] = {
+		.name = "cm-x270:red",
+		.default_trigger = "nand-disk",
+		.gpio = 93,
+		.active_low = 1,
+	},
+	[1] = {
+		.name = "cm-x270:green",
+		.default_trigger = "heartbeat",
+		.gpio = 94,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cmx270_leds),
+	.leds = cmx270_leds,
+};
+
 static struct platform_device cmx270_led_device = {
-	.name		= "cm-x270-led",
+	.name		= "leds-gpio",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx270_gpio_led_pdata,
+	},
 };
 
+static void __init cmx270_init_leds(void)
+{
+	platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
 /* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
 
 static struct resource cmx270_2700G_resource[] = {
 	/* frame buffer memory including ODFB and External SDRAM */
 	[0] = {
-		.start = MARATHON_PHYS,
-		.end   = MARATHON_PHYS + 0x02000000,
+		.start = PXA_CS2_PHYS,
+		.end   = PXA_CS2_PHYS + 0x01ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 	/* Marathon registers */
 	[1] = {
-		.start = MARATHON_PHYS + 0x03fe0000,
-		.end   = MARATHON_PHYS + 0x03ffffff,
+		.start = PXA_CS2_PHYS + 0x03fe0000,
+		.end   = PXA_CS2_PHYS + 0x03ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -205,44 +365,15 @@ static struct platform_device cmx270_2700G = {
 	.id		= -1,
 };
 
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
-	.name = "pata_cm_x270",
-	.id = -1,
-	.dev		= {
-		.dma_mask	= &ata_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&cmx270_device_dm9k,
-	&cmx270_audio_device,
-	&cmx270_rtc_device,
-	&cmx270_2700G,
-	&cmx270_led_device,
-	&cmx270_ts_device,
-	&cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-	[0] = { /* IDE/general purpose space */
-		.virtual	= CMX270_IDE104_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IDE104_PHYS),
-		.length		= SZ_64M - SZ_8M,
-		.type		= MT_DEVICE
-	},
-	[1] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IT8152_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
+static void __init cmx270_init_2700G(void)
+{
+	platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /*
   Display definitions
   keep these for backwards compatibility, although symbolic names (as
@@ -452,7 +583,16 @@ static int __init cmx270_set_display(char *str)
 */
 __setup("monitor=", cmx270_set_display);
 
+static void __init cmx270_init_display(void)
+{
+	set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cmx270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -467,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 	.init		= cmx270_ohci_init,
 };
 
+static void __init cmx270_init_ohci(void)
+{
+	pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
 
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int cmx270_mci_init(struct device *dev,
 			   irq_handler_t cmx270_detect_int,
 			   void *data)
 {
 	int err;
 
-	/*
-	 * setup GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* SB-X270 uses GPIO105 as SD power enable */
-	pxa_gpio_mode(105 | GPIO_OUT);
+	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+	if (err) {
+		dev_warn(dev, "power gpio unavailable\n");
+		return err;
+	}
 
-	/* card detect IRQ on GPIO 83 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+	gpio_direction_output(GPIO105_MMC_POWER, 0);
 
 	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
-		       " request MMC card detect IRQ\n");
+	if (err) {
+		gpio_free(GPIO105_MMC_POWER);
+		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+			" request MMC card detect IRQ\n");
+	}
 
 	return err;
 }
@@ -505,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data *p_d = dev->platform_data;
 
 	if ((1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		GPCR(105) = GPIO_bit(105);
+		dev_dbg(dev, "power on\n");
+		gpio_set_value(GPIO105_MMC_POWER, 0);
 	} else {
-		GPSR(105) = GPIO_bit(105);
-		printk(KERN_DEBUG "%s: off\n", __func__);
+		gpio_set_value(GPIO105_MMC_POWER, 1);
+		dev_dbg(dev, "power off\n");
 	}
 }
 
 static void cmx270_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CMX270_MMC_IRQ, data);
+	gpio_free(GPIO105_MMC_POWER);
 }
 
 static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -525,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
 	.exit		= cmx270_mci_exit,
 };
 
+static void __init cmx270_init_mmc(void)
+{
+	pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
@@ -586,52 +737,63 @@ static int __init cmx270_pm_init(void)
 static int __init cmx270_pm_init(void) { return 0; }
 #endif
 
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
+
 static void __init cmx270_init(void)
 {
 	cmx270_pm_init();
 
-	set_pxa_fb_info(cmx270_display);
-
-	/* register CM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&cmx270_mci_platform_data);
-	pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
-	/* This enables the STUART */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
-
-	/* This enables the BTUART  */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+	cmx270_init_dm9000();
+	cmx270_init_rtc();
+	cmx270_init_display();
+	cmx270_init_mmc();
+	cmx270_init_ohci();
+	cmx270_init_ac97();
+	cmx270_init_touchscreen();
+	cmx270_init_leds();
+	cmx270_init_2700G();
 }
 
 static void __init cmx270_init_irq(void)
 {
 	pxa27x_init_irq();
 
+	cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
 
-	cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+	[0] = { /* PCI bridge */
+		.virtual	= CMX270_IT8152_VIRT,
+		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
+};
 
-	/* Setup interrupt for dm9000 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-	set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 
-	/* Setup interrupt for 2700G */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-	set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+	it8152_base_address = CMX270_IT8152_VIRT;
 }
-
+#else
 static void __init cmx270_map_io(void)
 {
 	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 }
-
+#endif
 
 MACHINE_START(ARMCORE, "Compulab CM-x270")
 	.boot_params	= 0xa0000100,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b757dd756655..e58504edb140 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -36,6 +36,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
@@ -464,6 +465,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
 		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
 	else
 		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 0a85f706e887..e91c0f26c412 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -26,6 +26,7 @@
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/corgi.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
@@ -204,7 +205,9 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.read_devdata    = corgipm_read_devdata,
 	.charger_wakeup  = corgi_charger_wakeup,
 	.should_wakeup   = corgi_should_wakeup,
+#ifdef CONFIG_BACKLIGHT_CORGI
 	.backlight_limit = corgibl_limit_intensity,
+#endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
 	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
@@ -226,6 +229,10 @@ static int __devinit corgipm_init(void)
 {
 	int ret;
 
+	if (!machine_is_corgi() && !machine_is_shepherd()
+			&& !machine_is_husky())
+		return -ENODEV;
+
 	corgipm_device = platform_device_alloc("sharpsl-pm", -1);
 	if (!corgipm_device)
 		return -ENOMEM;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d6c05b6eab35..84489dc51d81 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -10,11 +10,16 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/i2c.h>
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa2xx_spi.h>
 #include <asm/arch/camera.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxa3xx_nand.h>
 
 #include "devices.h"
+#include "generic.h"
 
 void __init pxa_register_device(struct platform_device *dev, void *data)
 {
@@ -91,8 +96,19 @@ static struct resource pxa2xx_udc_resources[] = {
 
 static u64 udc_dma_mask = ~(u32)0;
 
-struct platform_device pxa_device_udc = {
-	.name		= "pxa2xx-udc",
+struct platform_device pxa25x_device_udc = {
+	.name		= "pxa25x-udc",
+	.id		= -1,
+	.resource	= pxa2xx_udc_resources,
+	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
+	.dev		=  {
+		.platform_data	= &pxa_udc_info,
+		.dma_mask	= &udc_dma_mask,
+	}
+};
+
+struct platform_device pxa27x_device_udc = {
+	.name		= "pxa27x-udc",
 	.id		= -1,
 	.resource	= pxa2xx_udc_resources,
 	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
@@ -233,8 +249,15 @@ struct platform_device pxa_device_i2c = {
 	.num_resources	= ARRAY_SIZE(pxai2c_resources),
 };
 
+static unsigned long pxa27x_i2c_mfp_cfg[] = {
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+
 void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 {
+	if (cpu_is_pxa27x())
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
 	pxa_register_device(&pxa_device_i2c, info);
 }
 
@@ -278,8 +301,69 @@ struct platform_device pxa_device_rtc = {
 	.id		= -1,
 };
 
+static struct resource pxa_ac97_resources[] = {
+	[0] = {
+		.start  = 0x40500000,
+		.end	= 0x40500000 + 0xfff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_AC97,
+		.end    = IRQ_AC97,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_ac97 = {
+	.name           = "pxa2xx-ac97",
+	.id             = -1,
+	.dev            = {
+		.dma_mask = &pxa_ac97_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(pxa_ac97_resources),
+	.resource       = pxa_ac97_resources,
+};
+
+void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
+{
+	pxa_register_device(&pxa_device_ac97, ops);
+}
+
 #ifdef CONFIG_PXA25x
 
+static struct resource pxa25x_resource_pwm0[] = {
+	[0] = {
+		.start	= 0x40b00000,
+		.end	= 0x40b0000f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa25x_device_pwm0 = {
+	.name		= "pxa25x-pwm",
+	.id		= 0,
+	.resource	= pxa25x_resource_pwm0,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm0),
+};
+
+static struct resource pxa25x_resource_pwm1[] = {
+	[0] = {
+		.start	= 0x40c00000,
+		.end	= 0x40c0000f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa25x_device_pwm1 = {
+	.name		= "pxa25x-pwm",
+	.id		= 1,
+	.resource	= pxa25x_resource_pwm1,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm1),
+};
+
 static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa25x_resource_ssp[] = {
@@ -568,6 +652,36 @@ struct platform_device pxa27x_device_ssp3 = {
 	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
 };
 
+static struct resource pxa27x_resource_pwm0[] = {
+	[0] = {
+		.start	= 0x40b00000,
+		.end	= 0x40b0001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa27x_device_pwm0 = {
+	.name		= "pxa27x-pwm",
+	.id		= 0,
+	.resource	= pxa27x_resource_pwm0,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm0),
+};
+
+static struct resource pxa27x_resource_pwm1[] = {
+	[0] = {
+		.start	= 0x40c00000,
+		.end	= 0x40c0001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa27x_device_pwm1 = {
+	.name		= "pxa27x-pwm",
+	.id		= 1,
+	.resource	= pxa27x_resource_pwm1,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm1),
+};
+
 static struct resource pxa27x_resource_camera[] = {
 	[0] = {
 		.start	= 0x50000000,
@@ -718,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_nand[] = {
+	[0] = {
+		.start	= 0x43100000,
+		.end	= 0x43100053,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NAND,
+		.end	= IRQ_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for Data DMA */
+		.start	= 97,
+		.end	= 97,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for Command DMA */
+		.start	= 99,
+		.end	= 99,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+	.name		= "pxa3xx-nand",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxa3xx_nand_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
+	.resource	= pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_nand, info);
+}
 #endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+	struct platform_device *pd;
+
+	pd = platform_device_alloc("pxa2xx-spi", id);
+	if (pd == NULL) {
+		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+		       id);
+		return;
+	}
+
+	pd->dev.platform_data = info;
+	platform_device_add(pd);
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index fcab017f27ee..887c738f5911 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,7 +1,8 @@
 extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
-extern struct platform_device pxa_device_udc;
+extern struct platform_device pxa25x_device_udc;
+extern struct platform_device pxa27x_device_udc;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
 extern struct platform_device pxa_device_btuart;
@@ -11,6 +12,7 @@ extern struct platform_device pxa_device_i2c;
 extern struct platform_device pxa_device_i2s;
 extern struct platform_device pxa_device_ficp;
 extern struct platform_device pxa_device_rtc;
+extern struct platform_device pxa_device_ac97;
 
 extern struct platform_device pxa27x_device_i2c_power;
 extern struct platform_device pxa27x_device_ohci;
@@ -24,4 +26,11 @@ extern struct platform_device pxa27x_device_ssp2;
 extern struct platform_device pxa27x_device_ssp3;
 extern struct platform_device pxa3xx_device_ssp4;
 
+extern struct platform_device pxa25x_device_pwm0;
+extern struct platform_device pxa25x_device_pwm1;
+extern struct platform_device pxa27x_device_pwm0;
+extern struct platform_device pxa27x_device_pwm1;
+
+extern struct platform_device pxa3xx_device_nand;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
new file mode 100644
index 000000000000..16c023630626
--- /dev/null
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -0,0 +1,56 @@
+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+	if (!machine_is_e400())
+		return -ENODEV;
+
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
new file mode 100644
index 000000000000..26bd599af178
--- /dev/null
+++ b/arch/arm/mach-pxa/e740_lcd.c
@@ -0,0 +1,123 @@
+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+	int ret;
+
+	if (!machine_is_e740())
+		return -ENODEV;
+
+	return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750_lcd.c
new file mode 100644
index 000000000000..75edc3b5390f
--- /dev/null
+++ b/arch/arm/mach-pxa/e750_lcd.c
@@ -0,0 +1,109 @@
+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+	if (!machine_is_e750())
+		return -ENODEV;
+
+	return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c
new file mode 100644
index 000000000000..e6aeab0ebc22
--- /dev/null
+++ b/arch/arm/mach-pxa/e800_lcd.c
@@ -0,0 +1,159 @@
+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+		.pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+	if (!machine_is_e800())
+		return -ENODEV;
+
+	return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9c57700ee5c2..e5cc6ca63c75 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,29 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/pxa27x-udc.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <asm/arch/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD		(105)
-#define EM_X270_ETHIRQ		IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ		IRQ_GPIO(13)
+#define GPIO41_ETHIRQ		(41)
+#define GPIO13_MMC_CD		(13)
+#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS	(11)
+#define GPIO56_NAND_RB	(56)
+
+static unsigned long em_x270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* QCI */
+	GPIO84_CIF_FV,
+	GPIO25_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO22_KP_MKOUT_7,
+
+	/* SSP1 */
+	GPIO26_SSP1_RXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO57_SSP1_TXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* power controls */
+	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO41_GPIO,	/* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
 		.start = PXA_CS2_PHYS,
 		.end   = PXA_CS2_PHYS + 3,
@@ -54,38 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(em_x270_dm9k_resource),
-	.resource	= em_x270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
+	.resource	= em_x270_dm9000_resource,
 	.dev		= {
-		.platform_data = &em_x270_dm9k_platdata,
+		.platform_data = &em_x270_dm9000_platdata,
 	}
 };
 
-/* audio device */
-static struct platform_device em_x270_audio = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-};
-
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-	.name		= "wm97xx-ts",
-	.id		= -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+	platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
 	[0] = {
 		.start = PXA_CS4_PHYS,
@@ -108,20 +230,26 @@ static struct platform_device em_x270_rtc = {
 	}
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS	(11)
-#define GPIO_NAND_RB	(56)
+static void __init em_x270_init_rtc(void)
+{
+	platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-	GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
 	dsb();
 
-	GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -161,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+	return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -214,17 +342,35 @@ static struct platform_device em_x270_nand = {
 	}
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&em_x270_dm9k,
-	&em_x270_audio,
-	&em_x270_ts,
-	&em_x270_rtc,
-	&em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+	int err;
+
+	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND CS gpio\n");
+		return;
+	}
+
+	gpio_direction_output(GPIO11_NAND_CS, 1);
+
+	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+		gpio_free(GPIO11_NAND_CS);
+		return;
+	}
+
+	gpio_direction_input(GPIO56_NAND_RB);
 
+	platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -242,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.init		= em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err;
-
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* EM-X270 uses GPIO13 as SD power enable */
-	pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-	err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			      "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
 		       __func__, err);
@@ -284,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	free_irq(EM_X270_MMC_IRQ, data);
+	int irq = gpio_to_irq(GPIO13_MMC_CD);
+	free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -294,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 	.exit		= em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+	pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
 	.pixclock	= 50000,
 	.bpp		= 16,
@@ -312,39 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
 	.modes		= &em_x270_lcd_mode,
 	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lccr0		= LCCR0_PAS,
-	.lccr3		= LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-	/* setup LCD */
 	set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-	/* register EM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 3,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= em_x270_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+};
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&em_x270_mci_platform_data);
-	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+static void __init em_x270_init_keypad(void)
+{
+	pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "sleep/wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_PWR,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
 
-	/* setup STUART GPIOs */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+static struct platform_device em_x270_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &em_x270_gpio_keys_data,
+	},
+};
 
-	/* setup BTUART GPIOs */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+static void __init em_x270_init_gpio_keys(void)
+{
+	platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
 
-	/* Setup interrupt for dm9000 */
-	set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+	em_x270_init_dm9000();
+	em_x270_init_rtc();
+	em_x270_init_nand();
+	em_x270_init_lcd();
+	em_x270_init_mmc();
+	em_x270_init_ohci();
+	em_x270_init_keypad();
+	em_x270_init_gpio_keys();
+	em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index ee0ae93c876a..c29b7b21c11b 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -17,7 +17,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/mach-types.h>
 
-#include <generic.h>
+#include "generic.h"
 
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
@@ -47,6 +47,19 @@ MACHINE_START(E330, "Toshiba e330")
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa25x_init_irq,
+	.fixup          = eseries_fixup,
+	.timer = &pxa_timer,
+MACHINE_END
+#endif
+
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
new file mode 100644
index 000000000000..362847a10998
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -0,0 +1,57 @@
+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/arch/udc.h>
+#include <asm/arch/eseries-gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+	if (machine_is_e330() || machine_is_e350() ||
+	    machine_is_e740() || machine_is_e750() ||
+	    machine_is_e400())
+		pxa_set_udc_info(&e7xx_udc_mach_info);
+	else if (machine_is_e800())
+		pxa_set_udc_info(&e800_udc_mach_info);
+
+	return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 000000000000..0143eed65398
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/i2c.h>
+
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &ezx_backlight_data,
+	},
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+	.pixclock		= 150000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+	.modes		= &mode_ezx_old,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+	.pixclock		= 192308,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 32,
+	.depth			= 18,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+	.modes		= &mode_72r89803y01,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+	/* PWM backlight */
+	GPIO16_PWM0_OUT,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* For A780 support (connected with Neptune GSM chip) */
+	GPIO30_USB_P3_2,	/* ICL_TXENB */
+	GPIO31_USB_P3_6,	/* ICL_VPOUT */
+	GPIO90_USB_P3_5,	/* ICL_VPIN */
+	GPIO91_USB_P3_1,	/* ICL_XRXD */
+	GPIO56_USB_P3_4,	/* ICL_VMOUT */
+	GPIO113_USB_P3_3,	/* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa_set_i2c_info(NULL);
+	if (machine_is_ezx_a780() || machine_is_ezx_e680())
+		set_pxa_fb_info(&ezx_fb_info_1);
+	else
+		set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+		char **cmdline, struct meminfo *mi)
+{
+	/* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+	 * 16MB one at 0xAC000000
+	 */
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (32*1024*1024);
+	mi->bank[1].start = 0xac000000;
+	mi->bank[1].node = 1;
+	mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 44617938f3f1..ca053226fba0 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -60,23 +60,6 @@ unsigned int get_memclk_frequency_10khz(void)
 EXPORT_SYMBOL(get_memclk_frequency_10khz);
 
 /*
- * Routine to safely enable or disable a clock in the CKEN
- */
-void __pxa_set_cken(int clock, int enable)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-
-	if (enable)
-		CKEN |= (1 << clock);
-	else
-		CKEN &= ~(1 << clock);
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(__pxa_set_cken);
-
-/*
  * Intel PXA2xx internal register mapping.
  *
  * Note 1: not all PXA2xx variants implement all those addresses.
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index a9a0c3fab159..fbff557bb225 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 530654474bb2..dd759d03a9fd 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -38,6 +39,7 @@
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 #include <asm/arch/littleton.h>
 
 #include "generic.h"
@@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	}
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &littleton_smc91x_info,
+	},
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /* use bit 30, 31 as the indicator of command parameter number */
 #define CMD0(x)		((0x00000000) | ((x) << 9))
 #define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+	pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
@@ -374,6 +435,7 @@ static void __init littleton_init(void)
 
 	littleton_init_lcd();
 	littleton_init_keypad();
+	littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index a20e4b1649d6..cc1c4fa06145 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -23,6 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -134,9 +135,12 @@ static struct sys_device lpd270_irq_device = {
 
 static int __init lpd270_irq_device_init(void)
 {
-	int ret = sysdev_class_register(&lpd270_irq_sysclass);
-	if (ret == 0)
-		ret = sysdev_register(&lpd270_irq_device);
+	int ret = -ENODEV;
+	if (machine_is_logicpd_pxa270()) {
+		ret = sysdev_class_register(&lpd270_irq_sysclass);
+		if (ret == 0)
+			ret = sysdev_register(&lpd270_irq_device);
+	}
 	return ret;
 }
 
@@ -164,11 +168,6 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-static struct platform_device lpd270_audio_device = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-};
-
 static struct resource lpd270_flash_resources[] = {
 	[0] = {
 		.start	= PXA_CS0_PHYS,
@@ -233,21 +232,20 @@ static struct platform_device lpd270_flash_device[2] = {
 	},
 };
 
-static void lpd270_backlight_power(int on)
-{
-	if (on) {
-		pxa_gpio_mode(GPIO16_PWM0_MD);
-		pxa_set_cken(CKEN_PWM0, 1);
-		PWM_CTRL0 = 0;
-		PWM_PWDUTY0 = 0x3ff;
-		PWM_PERVAL0 = 0x3ff;
-	} else {
-		PWM_CTRL0 = 0;
-		PWM_PWDUTY0 = 0x0;
-		PWM_PERVAL0 = 0x3FF;
-		pxa_set_cken(CKEN_PWM0, 0);
-	}
-}
+static struct platform_pwm_backlight_data lpd270_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1,
+	.dft_brightness	= 1,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device lpd270_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &lpd270_backlight_data,
+	},
+};
 
 /* 5.7" TFT QVGA (LoLo display number 1) */
 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
@@ -269,7 +267,6 @@ static struct pxafb_mach_info sharp_lq057q3dc02 = {
 	.num_modes		= 1,
 	.lccr0			= 0x07800080,
 	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 /* 12.1" TFT SVGA (LoLo display number 2) */
@@ -292,7 +289,6 @@ static struct pxafb_mach_info sharp_lq121s1dg31 = {
 	.num_modes		= 1,
 	.lccr0			= 0x07800080,
 	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 /* 3.6" TFT QVGA (LoLo display number 3) */
@@ -315,7 +311,6 @@ static struct pxafb_mach_info sharp_lq036q1da01 = {
 	.num_modes		= 1,
 	.lccr0			= 0x07800080,
 	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 /* 6.4" TFT VGA (LoLo display number 5) */
@@ -338,7 +333,6 @@ static struct pxafb_mach_info sharp_lq64d343 = {
 	.num_modes		= 1,
 	.lccr0			= 0x07800080,
 	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 /* 10.4" TFT VGA (LoLo display number 7) */
@@ -361,7 +355,6 @@ static struct pxafb_mach_info sharp_lq10d368 = {
 	.num_modes		= 1,
 	.lccr0			= 0x07800080,
 	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 /* 3.5" TFT QVGA (LoLo display number 8) */
@@ -384,7 +377,6 @@ static struct pxafb_mach_info sharp_lq035q7db02_20 = {
 	.num_modes		= 1,
 	.lccr0			= 0x07800080,
 	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 static struct pxafb_mach_info *lpd270_lcd_to_use;
@@ -414,7 +406,7 @@ __setup("lcd=", lpd270_set_lcd);
 
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
-	&lpd270_audio_device,
+	&lpd270_backlight_device,
 	&lpd270_flash_device[0],
 	&lpd270_flash_device[1],
 };
@@ -454,9 +446,12 @@ static void __init lpd270_init(void)
 	 * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
 	 */
 	pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
+	pxa_gpio_mode(GPIO16_PWM0_MD);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
+	pxa_set_ac97_info(NULL);
+
 	if (lpd270_lcd_to_use != NULL)
 		set_pxa_fb_info(lpd270_lcd_to_use);
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 7b9bdd0c6665..ac26423cd20c 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -43,6 +44,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa25x.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/lubbock.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/irda.h>
@@ -196,11 +198,6 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	// no D+ pullup; lubbock can't connect/disconnect in software
 };
 
-static struct platform_device lub_audio_device = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-};
-
 static struct resource sa1111_resources[] = {
 	[0] = {
 		.start	= 0x10000000,
@@ -230,14 +227,6 @@ static struct pxa2xx_spi_master pxa_ssp_master_info = {
 	.num_chipselect	= 0,
 };
 
-static struct platform_device pxa_ssp = {
-	.name		= "pxa2xx-spi",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &pxa_ssp_master_info,
-	},
-};
-
 static int lubbock_ads7846_pendown_state(void)
 {
 	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
@@ -296,11 +285,18 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static struct smc91x_platdata lubbock_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &lubbock_smc91x_info,
+	},
 };
 
 static struct resource flash_resources[] = {
@@ -368,11 +364,9 @@ static struct platform_device lubbock_flash_device[2] = {
 
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
-	&lub_audio_device,
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
-	&pxa_ssp,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -476,6 +470,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		LUB_MISC_WR |= 1 << 4;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	local_irq_restore(flags);
 }
 
@@ -494,6 +489,7 @@ static void __init lubbock_init(void)
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
 	pxa_set_ficp_info(&lubbock_ficp_platform_data);
+	pxa_set_ac97_info(NULL);
 
 	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
 		(BOOT_DEF & 1) ? 2 : 4;
@@ -505,6 +501,7 @@ static void __init lubbock_init(void)
 	lubbock_flash_data[flashboot].name = "boot-rom";
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index badba064dc04..c9d274f0048f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,31 +17,32 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
 
-#include <asm/gpio.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/arch/magician.h>
 #include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/i2c.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/ohci.h>
 
+#include "devices.h"
 #include "generic.h"
 
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
 
 	/* SDRAM and Static Memory I/O Signals */
 	GPIO20_nSDCS_2,
@@ -131,6 +132,7 @@ static unsigned long magician_pin_config[] = {
 static void magician_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data magician_ficp_info = {
@@ -348,40 +350,59 @@ static struct pxafb_mach_info samsung_info = {
  * Backlight
  */
 
-static void magician_set_bl_intensity(int intensity)
+static int magician_backlight_init(struct device *dev)
 {
-	if (intensity) {
-		PWM_CTRL0 = 1;
-		PWM_PERVAL0 = 0xc8;
-		if (intensity > 0xc7) {
-			PWM_PWDUTY0 = intensity - 0x48;
-			gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
-		} else {
-			PWM_PWDUTY0 = intensity;
-			gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
-		}
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 1);
-		pxa_set_cken(CKEN_PWM0, 1);
+	int ret;
+
+	ret = gpio_request(EGPIO_MAGICIAN_BL_POWER, "BL_POWER");
+	if (ret)
+		goto err;
+	ret = gpio_request(EGPIO_MAGICIAN_BL_POWER2, "BL_POWER2");
+	if (ret)
+		goto err2;
+	return 0;
+
+err2:
+	gpio_free(EGPIO_MAGICIAN_BL_POWER);
+err:
+	return ret;
+}
+
+static int magician_backlight_notify(int brightness)
+{
+	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
+	if (brightness >= 200) {
+		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
+		return brightness - 72;
 	} else {
-		/* PWM_PWDUTY0 = intensity; */
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 0);
-		pxa_set_cken(CKEN_PWM0, 0);
+		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
+		return brightness;
 	}
 }
 
-static struct generic_bl_info backlight_info = {
-	.default_intensity = 0x64,
-	.limit_mask        = 0x0b,
-	.max_intensity     = 0xc7+0x48,
-	.set_bl_intensity  = magician_set_bl_intensity,
+static void magician_backlight_exit(struct device *dev)
+{
+	gpio_free(EGPIO_MAGICIAN_BL_POWER);
+	gpio_free(EGPIO_MAGICIAN_BL_POWER2);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 0,
+	.max_brightness = 272,
+	.dft_brightness = 100,
+	.pwm_period_ns  = 30923,
+	.init           = magician_backlight_init,
+	.notify         = magician_backlight_notify,
+	.exit           = magician_backlight_exit,
 };
 
 static struct platform_device backlight = {
-	.name = "generic-bl",
+	.name = "pwm-backlight",
+	.id   = -1,
 	.dev  = {
-		.platform_data = &backlight_info,
+		.parent        = &pxa27x_device_pwm0.dev,
+		.platform_data = &backlight_data,
 	},
-	.id   = -1,
 };
 
 /*
@@ -490,6 +511,37 @@ static struct platform_device pasic3 = {
  * External power
  */
 
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+	ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+	if (ret)
+		goto err_chg_en;
+	ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+	if (!ret)
+		ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+	if (ret)
+		goto err_nchg_en;
+
+	return 0;
+
+err_nchg_en:
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+	return ret;
+}
+
 static int magician_is_ac_online(void)
 {
 	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -506,14 +558,24 @@ static void magician_set_charge(int flags)
 	gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
 }
 
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
 static char *magician_supplicants[] = {
 	"ds2760-battery.0", "backup-battery"
 };
 
 static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
 	.is_ac_online    = magician_is_ac_online,
 	.is_usb_online   = magician_is_usb_online,
 	.set_charge      = magician_set_charge,
+	.exit            = power_supply_exit,
 	.supplied_to     = magician_supplicants,
 	.num_supplicants = ARRAY_SIZE(magician_supplicants),
 };
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 7399fb34da4e..851ec2d9b699 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -23,9 +23,10 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/backlight.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO45_AC97_SYSCLK,
 
 	/* Keypad */
-	GPIO93_KP_DKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO94_KP_DKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO95_KP_DKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO93_KP_DKIN_0,
+	GPIO94_KP_DKIN_1,
+	GPIO95_KP_DKIN_2,
 	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
@@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata mainstone_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &mainstone_smc91x_info,
+	},
 };
 
 static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@@ -280,12 +289,6 @@ static pxa2xx_audio_ops_t mst_audio_ops = {
 	.resume		= mst_audio_resume,
 };
 
-static struct platform_device mst_audio_device = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-	.dev		= { .platform_data = &mst_audio_ops },
-};
-
 static struct resource flash_resources[] = {
 	[0] = {
 		.start	= PXA_CS0_PHYS,
@@ -349,56 +352,27 @@ static struct platform_device mst_flash_device[2] = {
 	},
 };
 
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-static int mainstone_backlight_update_status(struct backlight_device *bl)
-{
-	int brightness = bl->props.brightness;
-
-	if (bl->props.power != FB_BLANK_UNBLANK ||
-	    bl->props.fb_blank != FB_BLANK_UNBLANK)
-		brightness = 0;
-
-	if (brightness != 0)
-		pxa_set_cken(CKEN_PWM0, 1);
-
-	PWM_CTRL0 = 0;
-	PWM_PWDUTY0 = brightness;
-	PWM_PERVAL0 = bl->props.max_brightness;
-
-	if (brightness == 0)
-		pxa_set_cken(CKEN_PWM0, 0);
-	return 0; /* pointless return value */
-}
-
-static int mainstone_backlight_get_brightness(struct backlight_device *bl)
-{
-	return PWM_PWDUTY0;
-}
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data mainstone_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
 
-static /*const*/ struct backlight_ops mainstone_backlight_ops = {
-	.update_status	= mainstone_backlight_update_status,
-	.get_brightness	= mainstone_backlight_get_brightness,
+static struct platform_device mainstone_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data = &mainstone_backlight_data,
+	},
 };
 
 static void __init mainstone_backlight_register(void)
 {
-	struct backlight_device *bl;
-
-	bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev,
-				       NULL, &mainstone_backlight_ops);
-	if (IS_ERR(bl)) {
-		printk(KERN_ERR "mainstone: unable to register backlight: %ld\n",
-		       PTR_ERR(bl));
-		return;
-	}
-
-	/*
-	 * broken design - register-then-setup interfaces are
-	 * utterly broken by definition.
-	 */
-	bl->props.max_brightness = 1023;
-	bl->props.brightness = 1023;
-	backlight_update_status(bl);
+	int ret = platform_device_register(&mainstone_backlight_device);
+	if (ret)
+		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
 }
 #else
 #define mainstone_backlight_register()	do { } while (0)
@@ -490,6 +464,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
 	} else {
@@ -528,7 +503,6 @@ static struct platform_device mst_gpio_keys_device = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
-	&mst_audio_device,
 	&mst_flash_device[0],
 	&mst_flash_device[1],
 	&mst_gpio_keys_device,
@@ -549,7 +523,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 	.init		= mainstone_ohci_init,
 };
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int mainstone_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
 	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
@@ -638,6 +612,7 @@ static void __init mainstone_init(void)
 	pxa_set_ficp_info(&mainstone_ficp_platform_data);
 	pxa_set_ohci_info(&mainstone_ohci_platform_data);
 	pxa_set_i2c_info(NULL);
+	pxa_set_ac97_info(&mst_audio_ops);
 
 	mainstone_init_keypad();
 }
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 22097a1707cc..fd4545eab803 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -20,6 +20,7 @@
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa2xx.h>
 
 #include "generic.h"
@@ -38,6 +39,28 @@ struct gpio_desc {
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
 
+static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
+{
+	unsigned mask = GPIO_bit(gpio);
+
+	/* low power state */
+	switch (lpm) {
+	case MFP_LPM_DRIVE_HIGH:
+		PGSR(gpio) |= mask;
+		break;
+	case MFP_LPM_DRIVE_LOW:
+		PGSR(gpio) &= ~mask;
+		break;
+	case MFP_LPM_INPUT:
+		break;
+	default:
+		pr_warning("%s: invalid low power state for GPIO%d\n",
+				__func__, gpio);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
 	unsigned long gafr, mask = GPIO_bit(gpio);
@@ -56,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	else
 		GPDR(gpio) &= ~mask;
 
-	/* low power state */
-	switch (c & MFP_LPM_STATE_MASK) {
-	case MFP_LPM_DRIVE_HIGH:
-		PGSR(gpio) |= mask;
-		break;
-	case MFP_LPM_DRIVE_LOW:
-		PGSR(gpio) &= ~mask;
-		break;
-	case MFP_LPM_INPUT:
-		break;
-	default:
-		pr_warning("%s: invalid low power state for GPIO%d\n",
-				__func__, gpio);
+	if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
 		return -EINVAL;
-	}
 
 	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
 	 * configurations of those pins not able to wakeup
@@ -90,6 +100,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	return 0;
 }
 
+static inline int __mfp_validate(int mfp)
+{
+	int gpio = mfp_to_gpio(mfp);
+
+	if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+		pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+		return -1;
+	}
+
+	return gpio;
+}
+
 void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
 	unsigned long flags;
@@ -98,13 +120,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
 	for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
 
-		gpio = mfp_to_gpio(MFP_PIN(*c));
-
-		if (!gpio_desc[gpio].valid) {
-			pr_warning("%s: GPIO%d is invalid pin\n",
-				__func__, gpio);
+		gpio = __mfp_validate(MFP_PIN(*c));
+		if (gpio < 0)
 			continue;
-		}
 
 		local_irq_save(flags);
 
@@ -115,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 	}
 }
 
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+	unsigned long flags;
+	int gpio;
+
+	gpio = __mfp_validate(mfp);
+	if (gpio < 0)
+		return;
+
+	local_irq_save(flags);
+	__mfp_config_lpm(gpio, lpm);
+	local_irq_restore(flags);
+}
+
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
 	struct gpio_desc *d;
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 000000000000..408657a24f8c
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,416 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Alex Osborne <ato@meshy.org>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/audio.h>
+#include <asm/arch/palmtx.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO13_GPIO,
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		return err;
+	}
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+	if (err)
+		goto pwr_err;
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto ro_err;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+ro_err:
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmtx_mci_power,
+	.get_ro		= palmtx_mci_get_ro,
+	.init 		= palmtx_mci_init,
+	.exit		= palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmtx_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+	.buttons	= palmtx_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtx_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMTX_MAX_INTENSITY,
+	.dft_brightness	= PALMTX_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTX_PERIOD_NS,
+	.init		= palmtx_backlight_init,
+	.notify		= palmtx_backlight_notify,
+	.exit		= palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmtx_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+	udelay(50);
+	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.udc_command		= palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+
+	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+
+	return 0;
+
+err_cs_usb:
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+	return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmtx_is_ac_online,
+	.is_usb_online   = palmtx_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmtx_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+	.modes		= palmtx_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmtx_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmtx_pxa_keys,
+#endif
+	&palmtx_backlight,
+	&power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+	.virtual	= PALMTX_PCMCIA_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+	.length		= PALMTX_PCMCIA_SIZE,
+	.type		= MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+	set_pxa_fb_info(&palmtx_lcd_screen);
+	pxa_set_mci_info(&palmtx_mci_platform_data);
+	pxa_set_udc_info(&palmtx_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtx_ficp_platform_data);
+	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+	.phys_io	= PALMTX_PHYS_IO_START,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= palmtx_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtx_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 3b945eb0aee3..377f3be8ce57 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -24,7 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
 #include <linux/leds.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/arch/hardware.h>
@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+	.base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "max7301",
+		.platform_data	= &max7301_info,
+		.max_speed_hz	= 13000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+/*
+ * NOR flash
+ */
 static struct physmap_flash_data pcm027_flash_data = {
 	.width  = 4,
 };
@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
 	pcm990_baseboard_init();
 #endif
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static void __init pcm027_map_io(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 49d951db0f3d..30023b00e476 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/ide.h>
 #include <linux/i2c.h>
+#include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
@@ -32,13 +33,120 @@
 #include <asm/arch/camera.h>
 #include <asm/mach/map.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pcm990_baseboard.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mfp-pxa27x.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	/* USB */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	/* PWM0 */
+	GPIO16_PWM0_OUT,
+};
 
 /*
- * The PCM-990 development baseboard uses PCM-027's hardeware in the
+ * pcm990_lcd_power - control power supply to the LCD
+ * @on: 0 = switch off, 1 = switch on
+ *
+ * Called by the pxafb driver
+ */
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+	if (on) {
+		/* enable LCD-Latches
+		 * power on LCD
+		 */
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
+			PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
+	} else {
+		/* disable LCD-Latches
+		 * power off LCD
+		 */
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
+	}
+}
+#endif
+
+#if defined(CONFIG_PCM990_DISPLAY_SHARP)
+static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
+	.pixclock		= 28000,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 20,
+	.left_margin		= 103,
+	.right_margin		= 47,
+	.vsync_len		= 6,
+	.upper_margin		= 28,
+	.lower_margin		= 5,
+	.sync			= 0,
+	.cmap_greyscale		= 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+	.modes			= &fb_info_sharp_lq084v1dg21,
+	.num_modes		= 1,
+	.lccr0			= LCCR0_PAS,
+	.lccr3			= LCCR3_PCP,
+	.pxafb_lcd_power	= pcm990_lcd_power,
+};
+#elif defined(CONFIG_PCM990_DISPLAY_NEC)
+struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
+	.pixclock		= 39720,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 32,
+	.left_margin		= 16,
+	.right_margin		= 48,
+	.vsync_len		= 2,
+	.upper_margin		= 12,
+	.lower_margin		= 17,
+	.sync			= 0,
+	.cmap_greyscale		= 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+	.modes			= &fb_info_nec_nl6448bc20_18d,
+	.num_modes		= 1,
+	.lccr0			= LCCR0_Act,
+	.lccr3			= LCCR3_PixFlEdg,
+	.pxafb_lcd_power	= pcm990_lcd_power,
+};
+#endif
+
+static struct platform_pwm_backlight_data pcm990_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device pcm990_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data = &pcm990_backlight_data,
+	},
+};
+
+/*
+ * The PCM-990 development baseboard uses PCM-027's hardware in the
  * following way:
  *
  * - LCD support is in use
@@ -185,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
 	int err;
 
-	/*
-	 * enable GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
 	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
 			     "MMC card detect", data);
 	if (err)
@@ -241,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
  */
 static int pcm990_ohci_init(struct device *dev)
 {
-	pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-	pxa_gpio_mode(PCM990_USB_PWR_EN);
 	/*
 	 * disable USB port 2 and 3
 	 * power sense is active low
@@ -269,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+	/* CIF */
+	GPIO98_CIF_DD_0,
+	GPIO105_CIF_DD_1,
+	GPIO104_CIF_DD_2,
+	GPIO103_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO94_CIF_DD_5,
+	GPIO93_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+	GPIO107_CIF_DD_8,
+	GPIO106_CIF_DD_9,
+	GPIO42_CIF_MCLK,
+	GPIO45_CIF_PCLK,
+	GPIO43_CIF_FV,
+	GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-	pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-	pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-	pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-	pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-	pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-	pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-	pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-	pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-	pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-	pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-	pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-	pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-	pxa_gpio_mode(GPIO43_CIF_FV_MD);
-	pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
 	return 0;
 }
 
@@ -333,36 +433,6 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
 
 /*
- * AC97 support
- * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
- */
-static struct resource pxa27x_ac97_resources[] = {
-	[0] = {
-		.start  = 0x40500000,
-		.end	= 0x40500000 + 0xfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_AC97,
-		.end    = IRQ_AC97,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-static struct platform_device pxa27x_device_ac97 = {
-	.name           = "pxa2xx-ac97",
-	.id             = -1,
-	.dev            = {
-		.dma_mask = &pxa_ac97_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(pxa27x_ac97_resources),
-	.resource       = pxa27x_ac97_resources,
-};
-
-/*
  * enable generic access to the base board control CPLDs U6 and U7
  */
 static struct map_desc pcm990_io_desc[] __initdata = {
@@ -387,13 +457,18 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
 	/* register CPLD access */
-	iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
 	/* register CPLD's IRQ controller */
 	pcm990_init_irq();
 
-	platform_device_register(&pxa27x_device_ac97);
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+	set_pxa_fb_info(&pcm990_fbinfo);
+#endif
+	platform_device_register(&pcm990_backlight_device);
 
 	/* MMC */
 	pxa_set_mci_info(&pcm990_mci_platform_data);
@@ -402,13 +477,13 @@ void __init pcm990_baseboard_init(void)
 	pxa_set_ohci_info(&pcm990_ohci_platform_data);
 
 	pxa_set_i2c_info(NULL);
+	pxa_set_ac97_info(NULL);
 
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-	i2c_register_board_info(0, pcm990_i2c_devices,
-		ARRAY_SIZE(pcm990_i2c_devices));
+	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-	printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 0b30f25cff3c..39612cfa0b4d 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -32,6 +32,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
@@ -266,6 +267,7 @@ static void poodle_irda_transceiver_mode(struct device *dev, int mode)
 	} else {
 		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
new file mode 100644
index 000000000000..ce28cd9fed16
--- /dev/null
+++ b/arch/arm/mach-pxa/pwm.c
@@ -0,0 +1,319 @@
+/*
+ * linux/arch/arm/mach-pxa/pwm.c
+ *
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2008-02-13	initial version
+ * 		eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+#include <asm/arch/pxa-regs.h>
+
+/* PWM registers and bits definitions */
+#define PWMCR		(0x00)
+#define PWMDCR		(0x04)
+#define PWMPCR		(0x08)
+
+#define PWMCR_SD	(1 << 6)
+#define PWMDCR_FD	(1 << 10)
+
+struct pwm_device {
+	struct list_head	node;
+	struct platform_device *pdev;
+
+	const char	*label;
+	struct clk	*clk;
+	int		clk_enabled;
+	void __iomem	*mmio_base;
+
+	unsigned int	use_count;
+	unsigned int	pwm_id;
+};
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long long c;
+	unsigned long period_cycles, prescale, pv, dc;
+
+	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	c = clk_get_rate(pwm->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 0)
+		period_cycles = 1;
+	prescale = (period_cycles - 1) / 1024;
+	pv = period_cycles / (prescale + 1) - 1;
+
+	if (prescale > 63)
+		return -EINVAL;
+
+	if (duty_ns == period_ns)
+		dc = PWMDCR_FD;
+	else
+		dc = (pv + 1) * duty_ns / period_ns;
+
+	/* NOTE: the clock to PWM has to be enabled first
+	 * before writing to the registers
+	 */
+	clk_enable(pwm->clk);
+	__raw_writel(prescale, pwm->mmio_base + PWMCR);
+	__raw_writel(dc, pwm->mmio_base + PWMDCR);
+	__raw_writel(pv, pwm->mmio_base + PWMPCR);
+	clk_disable(pwm->clk);
+
+	return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	int rc = 0;
+
+	if (!pwm->clk_enabled) {
+		rc = clk_enable(pwm->clk);
+		if (!rc)
+			pwm->clk_enabled = 1;
+	}
+	return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	if (pwm->clk_enabled) {
+		clk_disable(pwm->clk);
+		pwm->clk_enabled = 0;
+	}
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, node) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count++;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		pr_warning("PWM device already freed\n");
+
+	mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->node, &pwm_list);
+	mutex_unlock(&pwm_lock);
+}
+
+static struct pwm_device *pwm_probe(struct platform_device *pdev,
+		unsigned int pwm_id, struct pwm_device *parent_pwm)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+	int ret = 0;
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pwm->clk = clk_get(&pdev->dev, "PWMCLK");
+	if (IS_ERR(pwm->clk)) {
+		ret = PTR_ERR(pwm->clk);
+		goto err_free;
+	}
+	pwm->clk_enabled = 0;
+
+	pwm->use_count = 0;
+	pwm->pwm_id = pwm_id;
+	pwm->pdev = pdev;
+
+	if (parent_pwm != NULL) {
+		/* registers for the second PWM has offset of 0x10 */
+		pwm->mmio_base = parent_pwm->mmio_base + 0x10;
+		__add_pwm(pwm);
+		return pwm;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+	if (pwm->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	__add_pwm(pwm);
+	platform_set_drvdata(pdev, pwm);
+	return pwm;
+
+err_free_mem:
+	release_mem_region(r->start, r->end - r->start + 1);
+err_free_clk:
+	clk_put(pwm->clk);
+err_free:
+	kfree(pwm);
+	return ERR_PTR(ret);
+}
+
+static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
+
+	if (IS_ERR(pwm))
+		return PTR_ERR(pwm);
+
+	return 0;
+}
+
+static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+
+	pwm = pwm_probe(pdev, pdev->id, NULL);
+	if (IS_ERR(pwm))
+		return PTR_ERR(pwm);
+
+	pwm = pwm_probe(pdev, pdev->id + 2, pwm);
+	if (IS_ERR(pwm))
+		return PTR_ERR(pwm);
+
+	return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+
+	pwm = platform_get_drvdata(pdev);
+	if (pwm == NULL)
+		return -ENODEV;
+
+	mutex_lock(&pwm_lock);
+	list_del(&pwm->node);
+	mutex_unlock(&pwm_lock);
+
+	iounmap(pwm->mmio_base);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, r->end - r->start + 1);
+
+	clk_put(pwm->clk);
+	kfree(pwm);
+	return 0;
+}
+
+static struct platform_driver pxa25x_pwm_driver = {
+	.driver		= {
+		.name	= "pxa25x-pwm",
+	},
+	.probe		= pxa25x_pwm_probe,
+	.remove		= __devexit_p(pwm_remove),
+};
+
+static struct platform_driver pxa27x_pwm_driver = {
+	.driver		= {
+		.name	= "pxa27x-pwm",
+	},
+	.probe		= pxa27x_pwm_probe,
+	.remove		= __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+	int ret = 0;
+
+	ret = platform_driver_register(&pxa25x_pwm_driver);
+	if (ret) {
+		printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
+		return ret;
+	}
+
+	ret = platform_driver_register(&pxa27x_pwm_driver);
+	if (ret) {
+		printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
+		return ret;
+	}
+
+	return ret;
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+	platform_driver_unregister(&pxa25x_pwm_driver);
+	platform_driver_unregister(&pxa27x_pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index e5b417d14bb0..c5b845b935bb 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -26,6 +26,7 @@
 #include <asm/hardware.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/dma.h>
@@ -108,6 +109,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
 	.getrate	= clk_pxa25x_lcd_getrate,
 };
 
+static unsigned long gpio12_config_32k[] = {
+	GPIO12_32KHz,
+};
+
+static unsigned long gpio12_config_gpio[] = {
+	GPIO12_GPIO,
+};
+
+static void clk_gpio12_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_32k, 1);
+}
+
+static void clk_gpio12_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio12_ops = {
+	.enable         = clk_gpio12_enable,
+	.disable        = clk_gpio12_disable,
+};
+
+static unsigned long gpio11_config_3m6[] = {
+	GPIO11_3_6MHz,
+};
+
+static unsigned long gpio11_config_gpio[] = {
+	GPIO11_GPIO,
+};
+
+static void clk_gpio11_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_3m6, 1);
+}
+
+static void clk_gpio11_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio11_ops = {
+	.enable         = clk_gpio11_enable,
+	.disable        = clk_gpio11_disable,
+};
+
 /*
  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -117,29 +164,40 @@ static struct clk pxa25x_hwuart_clk =
 	INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
 ;
 
+/*
+ * PXA 2xx clock declarations. Order is important (see aliases below)
+ * Please be careful not to disrupt the ordering.
+ */
 static struct clk pxa25x_clks[] = {
 	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
 	INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
 	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
 	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
-	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
+	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+	INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
+	INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
 	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
 
 	INIT_CKEN("SSPCLK",  SSP, 3686400, 0, &pxa25x_device_ssp.dev),
 	INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
 	INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
+	INIT_CKEN("PWMCLK", PWM0, 3686400, 0, &pxa25x_device_pwm0.dev),
+	INIT_CKEN("PWMCLK", PWM1, 3686400, 0, &pxa25x_device_pwm1.dev),
 
 	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
 
 	/*
-	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
-	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
 	INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
 	*/
 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
+static struct clk pxa2xx_clk_aliases[] = {
+	INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
+	INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
+};
+
 #ifdef CONFIG_PM
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
@@ -260,7 +318,7 @@ void __init pxa25x_init_irq(void)
 }
 
 static struct platform_device *pxa25x_devices[] __initdata = {
-	&pxa_device_udc,
+	&pxa25x_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
@@ -269,6 +327,8 @@ static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_ssp,
 	&pxa25x_device_nssp,
 	&pxa25x_device_assp,
+	&pxa25x_device_pwm0,
+	&pxa25x_device_pwm1,
 };
 
 static struct sys_device pxa25x_sysdev[] = {
@@ -284,7 +344,7 @@ static int __init pxa25x_init(void)
 	int i, ret = 0;
 
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
+	if (cpu_is_pxa255())
 		clks_register(&pxa25x_hwuart_clk, 1);
 
 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
@@ -308,9 +368,11 @@ static int __init pxa25x_init(void)
 	}
 
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
+	if (cpu_is_pxa255())
 		ret = platform_device_register(&pxa_device_hwuart);
 
+	clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
+
 	return ret;
 }
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7e945836e129..d5d14ea33f27 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -146,7 +146,7 @@ static struct clk pxa27x_clks[] = {
 
 	INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
 	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
-	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa_device_udc.dev),
+	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa27x_device_udc.dev),
 	INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
 
@@ -157,12 +157,13 @@ static struct clk pxa27x_clks[] = {
 	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
 	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
 	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+	INIT_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
+	INIT_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
 
 	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
 	INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL),
 
 	/*
-	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
 	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
 	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
 	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
@@ -349,11 +350,14 @@ struct platform_device pxa27x_device_i2c_power = {
 
 void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 {
+	local_irq_disable();
+	PCFR |= PCFR_PI2CEN;
+	local_irq_enable();
 	pxa27x_device_i2c_power.dev.platform_data = info;
 }
 
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_udc,
+	&pxa27x_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
@@ -363,6 +367,8 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_ssp1,
 	&pxa27x_device_ssp2,
 	&pxa27x_device_ssp3,
+	&pxa27x_device_pwm0,
+	&pxa27x_device_pwm1,
 };
 
 static struct sys_device pxa27x_sysdev[] = {
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
new file mode 100644
index 000000000000..d4f6415e8413
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa2xx.c
+ *
+ * code specific to pxa2xx
+ *
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include <asm/arch/mfp-pxa2xx.h>
+#include <asm/arch/mfp-pxa25x.h>
+#include <asm/arch/irda.h>
+
+static unsigned long pxa2xx_mfp_fir[] = {
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+};
+
+static unsigned long pxa2xx_mfp_sir[] = {
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+};
+
+static unsigned long pxa2xx_mfp_off[] = {
+	GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
+};
+
+void pxa2xx_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
+	} else if (mode & IR_SIRMODE) {
+		pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
+	} else if (mode & IR_FIRMODE) {
+		pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
+	} else
+		BUG();
+}
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0a0d3877f212..da92e9733886 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -15,10 +15,16 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
 #include <asm/arch/mfp-pxa300.h>
 
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
 static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
@@ -79,15 +85,26 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct clk common_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+};
+
+static struct clk pxa310_clks[] = {
+	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
 static int __init pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(common_clks));
 	}
 
-	if (cpu_is_pxa310())
+	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa310_clks));
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 74128eb8f8d0..c557c23a1efe 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -15,11 +15,17 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/arch/mfp.h>
+#include <asm/arch/pxa3xx-regs.h>
 #include <asm/arch/mfp-pxa320.h>
 
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
 static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
@@ -74,16 +80,17 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static void __init pxa320_init_mfp(void)
-{
-	pxa3xx_init_mfp();
-	pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-}
+static struct clk pxa320_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+};
 
 static int __init pxa320_init(void)
 {
-	if (cpu_is_pxa320())
-		pxa320_init_mfp();
+	if (cpu_is_pxa320()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa320_clks));
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 644550bfa330..f491025a0c82 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -144,7 +144,7 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
 	return hsio_clk;
 }
 
-static void clk_pxa3xx_cken_enable(struct clk *clk)
+void clk_pxa3xx_cken_enable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -154,7 +154,7 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
 		CKENB |= mask;
 }
 
-static void clk_pxa3xx_cken_disable(struct clk *clk)
+void clk_pxa3xx_cken_disable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -164,7 +164,7 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
 		CKENB &= ~mask;
 }
 
-static const struct clkops clk_pxa3xx_cken_ops = {
+const struct clkops clk_pxa3xx_cken_ops = {
 	.enable		= clk_pxa3xx_cken_enable,
 	.disable	= clk_pxa3xx_cken_disable,
 };
@@ -196,24 +196,6 @@ static const struct clkops clk_pout_ops = {
 	.disable	= clk_pout_disable,
 };
 
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= _ops,				\
-		.cken	= CKEN_##_cken,			\
-	}
-
 static struct clk pxa3xx_clks[] = {
 	{
 		.name           = "CLK_POUT",
@@ -231,7 +213,7 @@ static struct clk pxa3xx_clks[] = {
 	PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
 
 	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
-	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa_device_udc.dev),
+	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa27x_device_udc.dev),
 	PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
 	PXA3xx_CKEN("KBDCLK", KEYPAD,  32768, 0, &pxa27x_device_keypad.dev),
 
@@ -239,10 +221,11 @@ static struct clk pxa3xx_clks[] = {
 	PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
 	PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
 	PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
+	PXA3xx_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
+	PXA3xx_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
 
 	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
 	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
-	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
 };
 
 #ifdef CONFIG_PM
@@ -520,7 +503,7 @@ void __init pxa3xx_init_irq(void)
  */
 
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_udc,
+/*	&pxa_device_udc,	The UDC driver is PXA25x only */
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
@@ -530,6 +513,8 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_ssp2,
 	&pxa27x_device_ssp3,
 	&pxa3xx_device_ssp4,
+	&pxa27x_device_pwm0,
+	&pxa27x_device_pwm1,
 };
 
 static struct sys_device pxa3xx_sysdev[] = {
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 000000000000..9503897d049c
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp-pxa930.h>
+
+static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+	MFP_ADDR(GPIO0, 0x02e0),
+	MFP_ADDR(GPIO1, 0x02dc),
+	MFP_ADDR(GPIO2, 0x02e8),
+	MFP_ADDR(GPIO3, 0x02d8),
+	MFP_ADDR(GPIO4, 0x02e4),
+	MFP_ADDR(GPIO5, 0x02ec),
+	MFP_ADDR(GPIO6, 0x02f8),
+	MFP_ADDR(GPIO7, 0x02fc),
+	MFP_ADDR(GPIO8, 0x0300),
+	MFP_ADDR(GPIO9, 0x02d4),
+	MFP_ADDR(GPIO10, 0x02f4),
+	MFP_ADDR(GPIO11, 0x02f0),
+	MFP_ADDR(GPIO12, 0x0304),
+	MFP_ADDR(GPIO13, 0x0310),
+	MFP_ADDR(GPIO14, 0x0308),
+	MFP_ADDR(GPIO15, 0x030c),
+	MFP_ADDR(GPIO16, 0x04e8),
+	MFP_ADDR(GPIO17, 0x04f4),
+	MFP_ADDR(GPIO18, 0x04f8),
+	MFP_ADDR(GPIO19, 0x04fc),
+	MFP_ADDR(GPIO20, 0x0518),
+	MFP_ADDR(GPIO21, 0x051c),
+	MFP_ADDR(GPIO22, 0x04ec),
+	MFP_ADDR(GPIO23, 0x0500),
+	MFP_ADDR(GPIO24, 0x04f0),
+	MFP_ADDR(GPIO25, 0x0504),
+	MFP_ADDR(GPIO26, 0x0510),
+	MFP_ADDR(GPIO27, 0x0514),
+	MFP_ADDR(GPIO28, 0x0520),
+	MFP_ADDR(GPIO29, 0x0600),
+	MFP_ADDR(GPIO30, 0x0618),
+	MFP_ADDR(GPIO31, 0x0610),
+	MFP_ADDR(GPIO32, 0x060c),
+	MFP_ADDR(GPIO33, 0x061c),
+	MFP_ADDR(GPIO34, 0x0620),
+	MFP_ADDR(GPIO35, 0x0628),
+	MFP_ADDR(GPIO36, 0x062c),
+	MFP_ADDR(GPIO37, 0x0630),
+	MFP_ADDR(GPIO38, 0x0634),
+	MFP_ADDR(GPIO39, 0x0638),
+	MFP_ADDR(GPIO40, 0x063c),
+	MFP_ADDR(GPIO41, 0x0614),
+	MFP_ADDR(GPIO42, 0x0624),
+	MFP_ADDR(GPIO43, 0x0608),
+	MFP_ADDR(GPIO44, 0x0604),
+	MFP_ADDR(GPIO45, 0x050c),
+	MFP_ADDR(GPIO46, 0x0508),
+	MFP_ADDR(GPIO47, 0x02bc),
+	MFP_ADDR(GPIO48, 0x02b4),
+	MFP_ADDR(GPIO49, 0x02b8),
+	MFP_ADDR(GPIO50, 0x02c8),
+	MFP_ADDR(GPIO51, 0x02c0),
+	MFP_ADDR(GPIO52, 0x02c4),
+	MFP_ADDR(GPIO53, 0x02d0),
+	MFP_ADDR(GPIO54, 0x02cc),
+	MFP_ADDR(GPIO55, 0x029c),
+	MFP_ADDR(GPIO56, 0x02a0),
+	MFP_ADDR(GPIO57, 0x0294),
+	MFP_ADDR(GPIO58, 0x0298),
+	MFP_ADDR(GPIO59, 0x02a4),
+	MFP_ADDR(GPIO60, 0x02a8),
+	MFP_ADDR(GPIO61, 0x02b0),
+	MFP_ADDR(GPIO62, 0x02ac),
+	MFP_ADDR(GPIO63, 0x0640),
+	MFP_ADDR(GPIO64, 0x065c),
+	MFP_ADDR(GPIO65, 0x0648),
+	MFP_ADDR(GPIO66, 0x0644),
+	MFP_ADDR(GPIO67, 0x0674),
+	MFP_ADDR(GPIO68, 0x0658),
+	MFP_ADDR(GPIO69, 0x0654),
+	MFP_ADDR(GPIO70, 0x0660),
+	MFP_ADDR(GPIO71, 0x0668),
+	MFP_ADDR(GPIO72, 0x0664),
+	MFP_ADDR(GPIO73, 0x0650),
+	MFP_ADDR(GPIO74, 0x066c),
+	MFP_ADDR(GPIO75, 0x064c),
+	MFP_ADDR(GPIO76, 0x0670),
+	MFP_ADDR(GPIO77, 0x0678),
+	MFP_ADDR(GPIO78, 0x067c),
+	MFP_ADDR(GPIO79, 0x0694),
+	MFP_ADDR(GPIO80, 0x069c),
+	MFP_ADDR(GPIO81, 0x06a0),
+	MFP_ADDR(GPIO82, 0x06a4),
+	MFP_ADDR(GPIO83, 0x0698),
+	MFP_ADDR(GPIO84, 0x06bc),
+	MFP_ADDR(GPIO85, 0x06b4),
+	MFP_ADDR(GPIO86, 0x06b0),
+	MFP_ADDR(GPIO87, 0x06c0),
+	MFP_ADDR(GPIO88, 0x06c4),
+	MFP_ADDR(GPIO89, 0x06ac),
+	MFP_ADDR(GPIO90, 0x0680),
+	MFP_ADDR(GPIO91, 0x0684),
+	MFP_ADDR(GPIO92, 0x0688),
+	MFP_ADDR(GPIO93, 0x0690),
+	MFP_ADDR(GPIO94, 0x068c),
+	MFP_ADDR(GPIO95, 0x06a8),
+	MFP_ADDR(GPIO96, 0x06b8),
+	MFP_ADDR(GPIO97, 0x0410),
+	MFP_ADDR(GPIO98, 0x0418),
+	MFP_ADDR(GPIO99, 0x041c),
+	MFP_ADDR(GPIO100, 0x0414),
+	MFP_ADDR(GPIO101, 0x0408),
+	MFP_ADDR(GPIO102, 0x0324),
+	MFP_ADDR(GPIO103, 0x040c),
+	MFP_ADDR(GPIO104, 0x0400),
+	MFP_ADDR(GPIO105, 0x0328),
+	MFP_ADDR(GPIO106, 0x0404),
+
+	MFP_ADDR(nXCVREN, 0x0204),
+	MFP_ADDR(DF_CLE_nOE, 0x020c),
+	MFP_ADDR(DF_nADV1_ALE, 0x0218),
+	MFP_ADDR(DF_SCLK_E, 0x0214),
+	MFP_ADDR(DF_SCLK_S, 0x0210),
+	MFP_ADDR(nBE0, 0x021c),
+	MFP_ADDR(nBE1, 0x0220),
+	MFP_ADDR(DF_nADV2_ALE, 0x0224),
+	MFP_ADDR(DF_INT_RnB, 0x0228),
+	MFP_ADDR(DF_nCS0, 0x022c),
+	MFP_ADDR(DF_nCS1, 0x0230),
+	MFP_ADDR(nLUA, 0x0254),
+	MFP_ADDR(nLLA, 0x0258),
+	MFP_ADDR(DF_nWE, 0x0234),
+	MFP_ADDR(DF_nRE_nOE, 0x0238),
+	MFP_ADDR(DF_ADDR0, 0x024c),
+	MFP_ADDR(DF_ADDR1, 0x0250),
+	MFP_ADDR(DF_ADDR2, 0x025c),
+	MFP_ADDR(DF_ADDR3, 0x0260),
+	MFP_ADDR(DF_IO0, 0x023c),
+	MFP_ADDR(DF_IO1, 0x0240),
+	MFP_ADDR(DF_IO2, 0x0244),
+	MFP_ADDR(DF_IO3, 0x0248),
+	MFP_ADDR(DF_IO4, 0x0264),
+	MFP_ADDR(DF_IO5, 0x0268),
+	MFP_ADDR(DF_IO6, 0x026c),
+	MFP_ADDR(DF_IO7, 0x0270),
+	MFP_ADDR(DF_IO8, 0x0274),
+	MFP_ADDR(DF_IO9, 0x0278),
+	MFP_ADDR(DF_IO10, 0x027c),
+	MFP_ADDR(DF_IO11, 0x0280),
+	MFP_ADDR(DF_IO12, 0x0284),
+	MFP_ADDR(DF_IO13, 0x0288),
+	MFP_ADDR(DF_IO14, 0x028c),
+	MFP_ADDR(DF_IO15, 0x0290),
+
+	MFP_ADDR(GSIM_UIO, 0x0314),
+	MFP_ADDR(GSIM_UCLK, 0x0318),
+	MFP_ADDR(GSIM_UDET, 0x031c),
+	MFP_ADDR(GSIM_nURST, 0x0320),
+
+	MFP_ADDR(PMIC_INT, 0x06c8),
+
+	MFP_ADDR(RDY, 0x0200),
+
+	MFP_ADDR_END,
+};
+
+static int __init pxa930_init(void)
+{
+	if (cpu_is_pxa930()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+	}
+
+	return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 000000000000..9d39dea57ce2
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,96 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/io.h>
+#include <asm/proc-fns.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio)
+{
+	int rc;
+
+	rc = gpio_request(gpio, "reset generator");
+	if (rc) {
+		printk(KERN_ERR "Can't request reset_gpio\n");
+		goto out;
+	}
+
+	rc = gpio_direction_input(gpio);
+	if (rc) {
+		printk(KERN_ERR "Can't configure reset_gpio for input\n");
+		gpio_free(gpio);
+		goto out;
+	}
+
+out:
+	if (!rc)
+		reset_gpio = gpio;
+
+	return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+	BUG_ON(reset_gpio == -1);
+
+	/* drive it low */
+	gpio_direction_output(reset_gpio, 0);
+	mdelay(2);
+	/* rising edge or drive high */
+	gpio_set_value(reset_gpio, 1);
+	mdelay(2);
+	/* falling edge */
+	gpio_set_value(reset_gpio, 0);
+
+	/* give it some time */
+	mdelay(10);
+
+	WARN_ON(1);
+	/* fallback */
+	do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+	/* Initialize the watchdog and let it fire */
+	OWER = OWER_WME;
+	OSSR = OSSR_M3;
+	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+	if (cpu_is_pxa2xx())
+		RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+	switch (mode) {
+	case 's':
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+		break;
+	case 'h':
+		do_hw_reset();
+		break;
+	case 'g':
+		do_gpio_reset();
+		break;
+	}
+}
+
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 000000000000..d02bc6f8bb93
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/saar.c
+ *
+ *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO97_GPIO,
+};
+
+#define SAAR_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (SAAR_ETH_PHYS + 0x300),
+		.end	= (SAAR_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &saar_smc91x_info,
+	},
+};
+
+static void __init saar_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = saar_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index e7d0fcd9b43f..762249c03ded 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -38,6 +38,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
@@ -450,6 +451,7 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
 	else
 		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
@@ -459,6 +461,7 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode)
 		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
 	else
 		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
@@ -529,11 +532,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-	pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
-	GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void spitz_restart(char mode)
@@ -547,6 +546,7 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
+	init_gpio_reset(SPITZ_GPIO_ON_RESET);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 23f050feb208..360354084ae4 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -26,6 +26,7 @@
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/spitz.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
@@ -207,7 +208,9 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.read_devdata     = spitzpm_read_devdata,
 	.charger_wakeup   = spitz_charger_wakeup,
 	.should_wakeup    = spitz_should_wakeup,
+#ifdef CONFIG_BACKLIGHT_CORGI
         .backlight_limit  = corgibl_limit_intensity,
+#endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
 	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
@@ -229,6 +232,10 @@ static int __devinit spitzpm_init(void)
 {
 	int ret;
 
+	if (!machine_is_spitz() && !machine_is_akita()
+			&& !machine_is_borzoi())
+		return -ENODEV;
+
 	spitzpm_device = platform_device_alloc("sharpsl-pm", -1);
 	if (!spitzpm_device)
 		return -ENOMEM;
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 0bb31982fb6f..89f38683787e 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -14,13 +14,6 @@
  *  IO-based SSP applications and allows easy port setup for DMA access.
  *
  *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- *
- *  Revision history:
- *   22nd Aug 2003 Initial version.
- *   20th Dec 2004 Added ssp_config for changing port config without
- *                 closing the port.
- *    4th Aug 2005 Added option to disable irq handler registration and
- *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
@@ -285,7 +278,7 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
 			goto out_region;
 		dev->irq = ssp->irq;
 	} else
-		dev->irq = 0;
+		dev->irq = NO_IRQ;
 
 	/* turn on SSP port clock */
 	clk_enable(ssp->clk);
@@ -306,7 +299,8 @@ void ssp_exit(struct ssp_dev *dev)
 	struct ssp_device *ssp = dev->ssp;
 
 	ssp_disable(dev);
-	free_irq(dev->irq, dev);
+	if (dev->irq != NO_IRQ)
+		free_irq(dev->irq, dev);
 	clk_disable(ssp->clk);
 	ssp_free(ssp);
 }
@@ -360,6 +354,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
 		dev_err(&pdev->dev, "failed to allocate memory");
 		return -ENOMEM;
 	}
+	ssp->pdev = pdev;
 
 	ssp->clk = clk_get(&pdev->dev, "SSPCLK");
 	if (IS_ERR(ssp->clk)) {
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 167412e6bec8..40bb70eff3fe 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -14,6 +14,7 @@
 #include <asm/hardware.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 
 		.text
 
@@ -35,20 +36,20 @@ ENTRY(pxa_cpu_standby)
 
 #ifdef CONFIG_PXA3xx
 
-#define MDCNFG		0x0000
-#define MDCNFG_DMCEN	(1 << 30)
-#define DDR_HCAL	0x0060
-#define DDR_HCAL_HCRNG	0x1f
-#define DDR_HCAL_HCPROG	(1 << 28)
-#define DDR_HCAL_HCEN	(1 << 31)
-#define DMCIER		0x0070
-#define DMCIER_EDLP	(1 << 29)
-#define DMCISR		0x0078
-#define RCOMP		0x0100
-#define RCOMP_SWEVAL	(1 << 31)
+#define PXA3_MDCNFG		0x0000
+#define PXA3_MDCNFG_DMCEN	(1 << 30)
+#define PXA3_DDR_HCAL		0x0060
+#define PXA3_DDR_HCAL_HCRNG	0x1f
+#define PXA3_DDR_HCAL_HCPROG	(1 << 28)
+#define PXA3_DDR_HCAL_HCEN	(1 << 31)
+#define PXA3_DMCIER		0x0070
+#define PXA3_DMCIER_EDLP	(1 << 29)
+#define PXA3_DMCISR		0x0078
+#define PXA3_RCOMP		0x0100
+#define PXA3_RCOMP_SWEVAL	(1 << 31)
 
 ENTRY(pm_enter_standby_start)
-	mov	r1, #0xf6000000		@ DMEMC_REG_BASE (MDCNFG)
+	mov	r1, #0xf6000000			@ DMEMC_REG_BASE (PXA3_MDCNFG)
 	add	r1, r1, #0x00100000
 
 	/*
@@ -59,54 +60,54 @@ ENTRY(pm_enter_standby_start)
 	 * This also means that only the dynamic memory controller
 	 * can be reliably accessed in the code following standby.
 	 */
-	ldr	r2, [r1]		@ Dummy read MDCNFG
+	ldr	r2, [r1]			@ Dummy read PXA3_MDCNFG
 
 	mcr	p14, 0, r0, c7, c0, 0
 	.rept	8
 	nop
 	.endr
 
-	ldr	r0, [r1, #DDR_HCAL]	@ Clear (and wait for) HCEN
-	bic	r0, r0, #DDR_HCAL_HCEN
-	str	r0, [r1, #DDR_HCAL]
-1:	ldr	r0, [r1, #DDR_HCAL]
-	tst	r0, #DDR_HCAL_HCEN
+	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ Clear (and wait for) HCEN
+	bic	r0, r0, #PXA3_DDR_HCAL_HCEN
+	str	r0, [r1, #PXA3_DDR_HCAL]
+1:	ldr	r0, [r1, #PXA3_DDR_HCAL]
+	tst	r0, #PXA3_DDR_HCAL_HCEN
 	bne	1b
 
-	ldr	r0, [r1, #RCOMP]	@ Initiate RCOMP
-	orr	r0, r0, #RCOMP_SWEVAL
-	str	r0, [r1, #RCOMP]
+	ldr	r0, [r1, #PXA3_RCOMP]		@ Initiate RCOMP
+	orr	r0, r0, #PXA3_RCOMP_SWEVAL
+	str	r0, [r1, #PXA3_RCOMP]
 
-	mov	r0, #~0			@ Clear interrupts
-	str	r0, [r1, #DMCISR]
+	mov	r0, #~0				@ Clear interrupts
+	str	r0, [r1, #PXA3_DMCISR]
 
-	ldr	r0, [r1, #DMCIER]	@ set DMIER[EDLP]
-	orr	r0, r0, #DMCIER_EDLP
-	str	r0, [r1, #DMCIER]
+	ldr	r0, [r1, #PXA3_DMCIER]		@ set DMIER[EDLP]
+	orr	r0, r0, #PXA3_DMCIER_EDLP
+	str	r0, [r1, #PXA3_DMCIER]
 
-	ldr	r0, [r1, #DDR_HCAL]	@ clear HCRNG, set HCPROG, HCEN
-	bic	r0, r0, #DDR_HCAL_HCRNG
-	orr	r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
-	str	r0, [r1, #DDR_HCAL]
+	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ clear HCRNG, set HCPROG, HCEN
+	bic	r0, r0, #PXA3_DDR_HCAL_HCRNG
+	orr	r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
+	str	r0, [r1, #PXA3_DDR_HCAL]
 
-1:	ldr	r0, [r1, #DMCISR]
-	tst	r0, #DMCIER_EDLP
+1:	ldr	r0, [r1, #PXA3_DMCISR]
+	tst	r0, #PXA3_DMCIER_EDLP
 	beq	1b
 
-	ldr	r0, [r1, #MDCNFG]	@ set MDCNFG[DMCEN]
-	orr	r0, r0, #MDCNFG_DMCEN
-	str	r0, [r1, #MDCNFG]
-1:	ldr	r0, [r1, #MDCNFG]
-	tst	r0, #MDCNFG_DMCEN
+	ldr	r0, [r1, #PXA3_MDCNFG]		@ set PXA3_MDCNFG[DMCEN]
+	orr	r0, r0, #PXA3_MDCNFG_DMCEN
+	str	r0, [r1, #PXA3_MDCNFG]
+1:	ldr	r0, [r1, #PXA3_MDCNFG]
+	tst	r0, #PXA3_MDCNFG_DMCEN
 	beq	1b
 
-	ldr	r0, [r1, #DDR_HCAL]	@ set DDR_HCAL[HCRNG]
+	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ set PXA3_DDR_HCAL[HCRNG]
 	orr	r0, r0, #2 @ HCRNG
-	str	r0, [r1, #DDR_HCAL]
+	str	r0, [r1, #PXA3_DDR_HCAL]
 
-	ldr	r0, [r1, #DMCIER]	@ Clear the interrupt
+	ldr	r0, [r1, #PXA3_DMCIER]		@ Clear the interrupt
 	bic	r0, r0, #0x20000000
-	str	r0, [r1, #DMCIER]
+	str	r0, [r1, #PXA3_DMCIER]
 
 	mov	pc, lr
 ENTRY(pm_enter_standby_end)
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 000000000000..ac283507e423
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (TAVOREVB_ETH_PHYS + 0x300),
+		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &tavorevb_smc91x_info,
+	},
+};
+
+static void __init tavorevb_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 000000000000..7d8505466e54
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <asm/arch/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 0);
+	gpio_set_value(data->gpio_pwr, 1);
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(20);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(10);
+	gpio_set_value(data->gpio_pwr, 0);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+	pr_info("BT_RADIO going: %s\n",
+			state == RFKILL_STATE_ON ? "on" : "off");
+
+	if (state == RFKILL_STATE_ON) {
+		pr_info("TOSA_BT: going ON\n");
+		tosa_bt_on(data);
+	} else {
+		pr_info("TOSA_BT: going OFF\n");
+		tosa_bt_off(data);
+	}
+	return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+	int rc;
+	struct rfkill *rfk;
+
+	struct tosa_bt_data *data = dev->dev.platform_data;
+
+	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+	if (rc)
+		goto err_reset;
+	rc = gpio_direction_output(data->gpio_reset, 0);
+	if (rc)
+		goto err_reset_dir;
+	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+	if (rc)
+		goto err_pwr;
+	rc = gpio_direction_output(data->gpio_pwr, 0);
+	if (rc)
+		goto err_pwr_dir;
+
+	rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+	if (!rfk) {
+		rc = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfk->name = "tosa-bt";
+	rfk->toggle_radio = tosa_bt_toggle_radio;
+	rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+	rfk->led_trigger.name = "tosa-bt";
+#endif
+
+	rc = rfkill_register(rfk);
+	if (rc)
+		goto err_rfkill;
+
+	platform_set_drvdata(dev, rfk);
+
+	return 0;
+
+err_rfkill:
+	if (rfk)
+		rfkill_free(rfk);
+	rfk = NULL;
+err_rfk_alloc:
+	tosa_bt_off(data);
+err_pwr_dir:
+	gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+	gpio_free(data->gpio_reset);
+err_reset:
+	return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+	struct tosa_bt_data *data = dev->dev.platform_data;
+	struct rfkill *rfk = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	if (rfk)
+		rfkill_unregister(rfk);
+	rfk = NULL;
+
+	tosa_bt_off(data);
+
+	gpio_free(data->gpio_pwr);
+	gpio_free(data->gpio_reset);
+
+	return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+	.probe = tosa_bt_probe,
+	.remove = __devexit_p(tosa_bt_remove),
+
+	.driver = {
+		.name = "tosa-bt",
+		.owner = THIS_MODULE,
+	},
+};
+
+
+static int __init tosa_bt_init(void)
+{
+	return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+	platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ab4a9f579913..fea17ce6b55f 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,30 +18,31 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pm.h>
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/rfkill.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/i2c.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
+#include <asm/arch/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/arch/tosa.h>
 
 #include <asm/hardware/scoop.h>
@@ -86,7 +87,7 @@ static unsigned long tosa_pin_config[] = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 	GPIO9_GPIO, /* Detect */
-	// GPIO10 nSD_INT
+	GPIO10_GPIO, /* nSD_INT */
 
 	/* CF */
 	GPIO13_GPIO, /* CD_IRQ */
@@ -124,34 +125,34 @@ static unsigned long tosa_pin_config[] = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* IrDA */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
 	/* Keybd */
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
+	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
 
 	/* SPI */
 	GPIO81_SSP2_CLK_OUT,
 	GPIO82_SSP2_FRM_OUT,
 	GPIO83_SSP2_TXD,
+
+	/* IrDA is managed in other way */
+	GPIO46_GPIO,
+	GPIO47_GPIO,
 };
 
 /*
@@ -249,6 +250,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
 	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
+	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+		goto err_gpio_detect;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+	if (err)
+		goto err_gpio_detect_dir;
+
 	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"MMC/SD card detect", data);
@@ -257,7 +267,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 		goto err_irq;
 	}
 
-	err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
 		goto err_gpio_wp;
@@ -266,7 +276,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_wp_dir;
 
-	err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
 		goto err_gpio_pwr;
@@ -275,8 +285,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_pwr_dir;
 
+	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+		goto err_gpio_int;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+	if (err)
+		goto err_gpio_int_dir;
+
 	return 0;
 
+err_gpio_int_dir:
+	gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
 err_gpio_pwr_dir:
 	gpio_free(TOSA_GPIO_PWR_ON);
 err_gpio_pwr:
@@ -285,6 +307,9 @@ err_gpio_wp_dir:
 err_gpio_wp:
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 err_irq:
+err_gpio_detect_dir:
+	gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
 	return err;
 }
 
@@ -306,9 +331,11 @@ static int tosa_mci_get_ro(struct device *dev)
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+	gpio_free(TOSA_GPIO_nSD_INT);
 	gpio_free(TOSA_GPIO_PWR_ON);
 	gpio_free(TOSA_GPIO_SD_WP);
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
@@ -322,29 +349,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	} else {
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+	}
+}
+
 static int tosa_irda_startup(struct device *dev)
 {
 	int ret;
 
+	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+	if (ret)
+		goto err_tx;
+	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	if (ret)
+		goto err_tx_dir;
+
 	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
 	if (ret)
-		return ret;
+		goto err_pwr;
 
 	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
 	if (ret)
-		gpio_free(TOSA_GPIO_IR_POWERDWN);
+		goto err_pwr_dir;
 
-	return ret;
-	}
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
 
-static void tosa_irda_shutdown(struct device *dev)
-{
+	return 0;
+
+err_pwr_dir:
 	gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+	gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+	return ret;
 }
 
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
 {
-	gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+	gpio_free(TOSA_GPIO_IR_POWERDWN);
+	gpio_free(TOSA_GPIO_IRDA_TX);
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -355,6 +408,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 };
 
 /*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+	gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+	"jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+	.init			= tosa_power_init,
+	.is_ac_online		= tosa_power_ac_online,
+	.exit			= tosa_power_exit,
+	.supplied_to		= tosa_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.end		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device tosa_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &tosa_power_data,
+	.resource		= tosa_power_resource,
+	.num_resources		= ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
  * Tosa Keyboard
  */
 static struct platform_device tosakbd_device = {
@@ -439,7 +556,7 @@ static struct gpio_led tosa_gpio_leds[] = {
 	},
 	{
 		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "none",
+		.default_trigger	= "tosa-bt",
 		.gpio			= TOSA_GPIO_BT_LED,
 	},
 };
@@ -457,21 +574,184 @@ static struct platform_device tosaled_device = {
 	},
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+	[0] = {
+		.start	= TOSA_LCDC_PHYS,
+		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+
+	[1] = {
+		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+	if (rc)
+		goto err_req_pclr;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+	if (rc)
+		goto err_req_suspend;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+	if (rc)
+		goto err_req_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	if (rc)
+		goto err_dir_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	if (rc)
+		goto err_dir_suspend;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+	if (rc)
+		goto err_dir_pclr;
+
+	mdelay(1);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+	mdelay(10);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+	return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+	return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+	mdelay(10);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+	mdelay(10);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+	{
+		.name	= "smf",
+		.offset	= 0,
+		.size	= 7 * 1024 * 1024,
+	},
+	{
+		.name	= "root",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 28 * 1024 * 1024,
+	},
+	{
+		.name	= "home",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+	.options	= 0,
+	.offs		= 4,
+	.len		= 2,
+	.pattern	= scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+	.num_partitions	= ARRAY_SIZE(tosa_nand_partition),
+	.partition	= tosa_nand_partition,
+	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+	.scr_pll2cr	= 0x0cc1,
+	.scr_gper	= 0x3300,
+	.scr_gpo_dsr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+	.scr_gpo_doecr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+	.irq_base	= IRQ_BOARD_START,
+	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+
+	.enable		= tosa_tc6393xb_enable,
+	.disable	= tosa_tc6393xb_disable,
+	.suspend	= tosa_tc6393xb_suspend,
+	.resume		= tosa_tc6393xb_resume,
+
+	.nand_data	= &tosa_tc6393xb_nand_config,
+};
+
+
+static struct platform_device tc6393xb_device = {
+	.name	= "tc6393xb",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_tc6393xb_setup,
+	},
+	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
+	.resource	= tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
+	.gpio_reset	= TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+	.name	= "tosa-bt",
+	.id	= -1,
+	.dev.platform_data = &tosa_bt_data,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
+	&tc6393xb_device,
+	&tosa_power_device,
 	&tosakbd_device,
 	&tosa_gpio_keys_device,
 	&tosaled_device,
+	&tosa_bt_device,
 };
 
 static void tosa_poweroff(void)
 {
-	gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
-	gpio_set_value(TOSA_GPIO_ON_RESET, 1);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void tosa_restart(char mode)
@@ -485,10 +765,14 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+	int dummy;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
+	init_gpio_reset(TOSA_GPIO_ON_RESET);
+
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
 
@@ -497,6 +781,10 @@ static void __init tosa_init(void)
 	/* enable batt_fault */
 	PMCR = 0x01;
 
+	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 931885d86b91..dee7bf36f013 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -41,6 +41,7 @@
 #include <asm/mach/flash.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/trizeps4.h>
 #include <asm/arch/audio.h>
@@ -175,19 +176,10 @@ static struct platform_device uart_devices = {
 	.resource	= NULL,
 };
 
-/********************************************************************************************
- * PXA270 ac97 sound codec
- ********************************************************************************************/
-static struct platform_device ac97_audio_device = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-};
-
 static struct platform_device * trizeps4_devices[] __initdata = {
 	&flash_device,
 	&uart_devices,
 	&dm9000_device,
-	&ac97_audio_device,
 };
 
 #ifdef CONFIG_MACH_TRIZEPS4_CONXS
@@ -262,6 +254,7 @@ static void board_irda_mode(struct device *dev, int mode)
 		/* Fast mode */
 		trizeps_conxs_ircr |= ConXS_IRCR_MODE;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		trizeps_conxs_ircr |= ConXS_IRCR_SD;
 	} else {
@@ -438,6 +431,7 @@ static void __init trizeps4_init(void)
 	pxa_set_mci_info(&trizeps4_mci_platform_data);
 	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
 	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
+	pxa_set_ac97_info(NULL);
 }
 
 static void __init trizeps4_map_io(void)
@@ -487,6 +481,7 @@ static void __init trizeps4_map_io(void)
 	ConXS_BCR = trizeps_conxs_bcr;
 #endif
 
+#warning FIXME - accessing PM registers directly is deprecated
 	PWER  = 0x00000002;
 	PFER  = 0x00000000;
 	PRER  = 0x00000002;
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 4a0028087ea6..8fca6d890b7d 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -18,23 +18,29 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/zylonite.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 
+#include "devices.h"
 #include "generic.h"
 
 #define MAX_SLOTS	3
 struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
 
-int gpio_backlight;
 int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
 
 int wm9713_irq;
 
@@ -54,18 +60,72 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata zylonite_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &zylonite_smc91x_info,
+	},
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static void zylonite_backlight_power(int on)
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+	[0] = {
+		.name			= "zylonite:yellow:1",
+		.default_trigger	= "heartbeat",
+	},
+	[1] = {
+		.name			= "zylonite:yellow:2",
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+	.leds		= zylonite_debug_leds,
+	.num_leds	= ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &zylonite_debug_leds_info,
+	}
+};
+
+static void __init zylonite_init_leds(void)
 {
-	gpio_set_value(gpio_backlight, on);
+	zylonite_debug_leds[0].gpio = gpio_debug_led1;
+	zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+	platform_device_register(&zylonite_device_leds);
 }
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data zylonite_backlight_data = {
+	.pwm_id		= 3,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device zylonite_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm1.dev,
+		.platform_data	= &zylonite_backlight_data,
+	},
+};
 
 static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
 	.pixclock		= 110000,
@@ -98,7 +158,6 @@ static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
 static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
 	.num_modes      	= 1,
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_backlight_power	= zylonite_backlight_power,
 };
 
 static struct pxafb_mode_info sharp_ls037_modes[] = {
@@ -134,13 +193,11 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = {
 	.modes			= sharp_ls037_modes,
 	.num_modes		= 2,
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_backlight_power	= zylonite_backlight_power,
 };
 
 static void __init zylonite_init_lcd(void)
 {
-	/* backlight GPIO: output, default on */
-	gpio_direction_output(gpio_backlight, 1);
+	platform_device_register(&zylonite_backlight_device);
 
 	if (lcd_id & 0x20) {
 		set_pxa_fb_info(&zylonite_sharp_lcd_info);
@@ -250,7 +307,7 @@ static void __init zylonite_init_mmc(void)
 static inline void zylonite_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int zylonite_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
@@ -315,6 +372,57 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= zylonite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+	pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init zylonite_init(void)
 {
 	/* board-processor specific initialization */
@@ -329,9 +437,12 @@ static void __init zylonite_init(void)
 	smc91x_resources[1].end   = gpio_to_irq(gpio_eth_irq);
 	platform_device_register(&smc91x_device);
 
+	pxa_set_ac97_info(NULL);
 	zylonite_init_lcd();
 	zylonite_init_mmc();
 	zylonite_init_keypad();
+	zylonite_init_nand();
+	zylonite_init_leds();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 324fb9daae28..b28d46e081d3 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -16,9 +16,12 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
 #include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/i2c.h>
 #include <asm/arch/zylonite.h>
 
 #include "generic.h"
@@ -50,6 +53,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO75_LCD_BIAS,
 	GPIO76_LCD_VSYNC,
 	GPIO127_LCD_CS_N,
+	GPIO20_PWM3_OUT,	/* backlight */
 
 	/* BTUART */
 	GPIO111_UART2_RTS,
@@ -108,6 +112,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO12_MMC2_DAT3,
 	GPIO13_MMC2_CLK,
 	GPIO14_MMC2_CMD,
+
+	/* Standard I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -191,6 +199,39 @@ static void __init zylonite_detect_lcd_panel(void)
 		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
 }
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+	[0] = {
+		.gpio_base	= 128,
+	},
+	[1] = {
+		.gpio_base	= 144,
+	},
+};
+
+struct i2c_board_info zylonite_i2c_board_info[] = {
+	{
+		.type		= "pca9539",
+		.addr		= 0x74,
+		.platform_data	= &gpio_exp[0],
+		.irq		= IRQ_GPIO(18),
+	}, {
+		.type		= "pca9539",
+		.addr		= 0x75,
+		.platform_data	= &gpio_exp[1],
+		.irq		= IRQ_GPIO(19),
+	},
+};
+
+static void __init zylonite_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
 void __init zylonite_pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -200,15 +241,14 @@ void __init zylonite_pxa300_init(void)
 		/* detect LCD panel */
 		zylonite_detect_lcd_panel();
 
-		/* GPIO pin assignment */
-		gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
-
 		/* MMC card detect & write protect for controller 0 */
 		zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
 		zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
 
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+		zylonite_init_i2c();
 	}
 
 	if (cpu_is_pxa300()) {
@@ -224,4 +264,8 @@ void __init zylonite_pxa300_init(void)
 		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
 		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
+
+	/* GPIOs for Debug LEDs */
+	gpio_debug_led1 = EXT_GPIO(25);
+	gpio_debug_led2 = EXT_GPIO(26);
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 193d07903b06..2b7fba7a2921 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -49,6 +49,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO15_2_LCD_LCLK,
 	GPIO16_2_LCD_PCLK,
 	GPIO17_2_LCD_BIAS,
+	GPIO14_PWM3_OUT,	/* backlight */
 
 	/* FFUART */
 	GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
@@ -115,6 +116,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO27_MMC2_DAT3,
 	GPIO28_MMC2_CLK,
 	GPIO29_MMC2_CMD,
+
+	/* Debug LEDs */
+	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 #define NUM_LCD_DETECT_PINS	7
@@ -187,8 +192,9 @@ void __init zylonite_pxa320_init(void)
 		zylonite_detect_lcd_panel();
 
 		/* GPIO pin assignment */
-		gpio_backlight	= mfp_to_gpio(MFP_PIN_GPIO14);
 		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
+		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
+		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
 
 		/* MMC card detect & write protect for controller 0 */
 		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index cd3dc0834b3b..99fdc736698c 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -37,6 +37,17 @@ config S3C2410_CLOCK
 	help
 	  Clock code for the S3C2410, and similar processors
 
+config SIMTEC_NOR
+	bool
+	help
+	  Internal node to specify machine has simtec NOR mapping
+
+config MACH_BAST_IDE
+	bool
+	select HAVE_PATA_PLATFORM
+	help
+	  Internal node for machines with an BAST style IDE
+	  interface
 
 menu "S3C2410 Machines"
 
@@ -61,15 +72,18 @@ config PM_H1940
 	  Internal node for H1940 and related PM
 
 config MACH_N30
-	bool "Acer N30"
+	bool "Acer N30 family"
 	select CPU_S3C2410
 	help
-	  Say Y here if you are using the Acer N30
+	  Say Y here if you want suppt for the Acer N30, Acer N35,
+	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
 	select PM_SIMTEC if PM
+	select SIMTEC_NOR
+	select MACH_BAST_IDE
 	select ISA
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -107,6 +121,8 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select PM_SIMTEC if PM
+	select SIMTEC_NOR
+	select MACH_BAST_IDE
 	select CPU_S3C2410
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
@@ -118,4 +134,3 @@ config MACH_QT2410
 	   Say Y here if you are using the Armzone QT2410
 
 endmenu
-
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index cabc13ce09e4..00f31f8c4e78 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -30,3 +30,11 @@ obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
 obj-$(CONFIG_MACH_TCT_HAMMER)	+= mach-tct_hammer.o
 obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
 obj-$(CONFIG_MACH_QT2410)	+= mach-qt2410.o
+
+# Common bits of machine support
+
+obj-$(CONFIG_SIMTEC_NOR)	+= nor-simtec.o
+
+# machine additions
+
+obj-$(CONFIG_MACH_BAST_IDE)	+= bast-ide.o
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c
new file mode 100644
index 000000000000..df95fe37cdc8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/bast-ide.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/mach-s3c2410/bast-ide.c
+ *
+ * Copyright 2007 Simtec Electronics
+ *	http://www.simtec.co.uk/products/EB2410ITX/
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-irq.h>
+
+/* IDE ports */
+
+static struct pata_platform_info bast_ide_platdata = {
+	.ioport_shift	= 5,
+};
+
+#define IDE_CS	S3C2410_CS5
+
+static struct resource bast_ide0_resource[] = {
+	[0]	= {
+		.start	= IDE_CS + BAST_PA_IDEPRI,
+		.end	= IDE_CS + BAST_PA_IDEPRI + (8 * 0x20) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20) ,
+		.end	= IDE_CS + BAST_PA_IDEPRIAUX + (7 * 0x20) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= IRQ_IDE0,
+		.end	= IRQ_IDE0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bast_device_ide0 = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(bast_ide0_resource),
+	.resource	= bast_ide0_resource,
+	.dev		= {
+		.platform_data = &bast_ide_platdata,
+		.coherent_dma_mask = ~0,
+	}
+
+};
+
+static struct resource bast_ide1_resource[] = {
+	[0]	= {
+		.start	= IDE_CS + BAST_PA_IDESEC,
+		.end	= IDE_CS + BAST_PA_IDESEC + (8 * 0x20) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20),
+		.end	= IDE_CS + BAST_PA_IDESECAUX + (7 * 0x20) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= IRQ_IDE1,
+		.end	= IRQ_IDE1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bast_device_ide1 = {
+	.name		= "pata_platform",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(bast_ide1_resource),
+	.resource	= bast_ide1_resource,
+	.dev		= {
+		.platform_data = &bast_ide_platdata,
+		.coherent_dma_mask = ~0,
+	}
+};
+
+static struct platform_device *bast_ide_devices[] __initdata = {
+	&bast_device_ide0,
+	&bast_device_ide1,
+};
+
+static __init int bast_ide_init(void)
+{
+	if (machine_is_bast() || machine_is_vr1000())
+		return platform_add_devices(bast_ide_devices,
+					    ARRAY_SIZE(bast_ide_devices));
+
+	return 0;
+}
+
+fs_initcall(bast_ide_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 27f63d5d3a7b..965f27129707 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-bast.c
  *
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -20,6 +20,8 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/dm9000.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
 
 #include <net/ax88796.h>
 
@@ -56,7 +58,9 @@
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
+
 #include "usb-simtec.h"
+#include "nor-simtec.h"
 
 #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
 
@@ -134,37 +138,21 @@ static struct map_desc bast_iodesc[] __initdata = {
   { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
   { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-  { VA_C2(BAST_VA_IDEPRI),  PA_CS3(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C2(BAST_VA_IDESEC),  PA_CS3(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C2(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C2(BAST_VA_IDESECAUX), PA_CS3(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 
   /* slow, word */
   { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
   { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-  { VA_C3(BAST_VA_IDEPRI),  PA_CS3(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C3(BAST_VA_IDESEC),  PA_CS3(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C3(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C3(BAST_VA_IDESECAUX), PA_CS3(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 
   /* fast, byte */
   { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
   { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-  { VA_C4(BAST_VA_IDEPRI),  PA_CS5(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C4(BAST_VA_IDESEC),  PA_CS5(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C4(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C4(BAST_VA_IDESECAUX), PA_CS5(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 
   /* fast, word */
   { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
   { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-  { VA_C5(BAST_VA_IDEPRI),  PA_CS5(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C5(BAST_VA_IDESEC),  PA_CS5(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C5(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C5(BAST_VA_IDESECAUX), PA_CS5(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -218,23 +206,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 	}
 };
 
-/* NOR Flash on BAST board */
-
-static struct resource bast_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS1 + 0x4000000,
-		.end   = S3C2410_CS1 + 0x4000000 + (32*1024*1024) - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device bast_device_nor = {
-	.name		= "bast-nor",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(bast_nor_resource),
-	.resource	= bast_nor_resource,
-};
-
 /* NAND Flash on BAST board */
 
 #ifdef CONFIG_PM
@@ -374,7 +345,7 @@ static struct resource bast_dm9k_resource[] = {
 	[2] = {
 		.start = IRQ_DM9000,
 		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	}
 
 };
@@ -564,6 +535,18 @@ static struct s3c2410fb_mach_info __initdata bast_fb_info = {
 	.default_display = 1,
 };
 
+/* I2C devices fitted. */
+
+static struct i2c_board_info bast_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	}, {
+		I2C_BOARD_INFO("simtec-pmu", 0x6b),
+	}, {
+		I2C_BOARD_INFO("ch7013", 0x75),
+	},
+};
+
 /* Standard BAST devices */
 
 static struct platform_device *bast_devices[] __initdata = {
@@ -573,7 +556,6 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_i2c,
  	&s3c_device_rtc,
 	&s3c_device_nand,
-	&bast_device_nor,
 	&bast_device_dm9k,
 	&bast_device_asix,
 	&bast_device_axpp,
@@ -622,6 +604,11 @@ static void __init bast_init(void)
 
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
+
+	i2c_register_board_info(0, bast_i2c_devs,
+				ARRAY_SIZE(bast_i2c_devs));
+
+	nor_simtec_init();
 }
 
 MACHINE_START(BAST, "Simtec-BAST")
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 621f548da610..43c2e915c5bf 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -1,9 +1,10 @@
-/* linux/arch/arm/mach-s3c2410/mach-n30.c
+/* Machine specific code for the Acer n30, Acer N35, Navman PiN 570,
+ * Yakumo AlphaX and Airis NC05 PDAs.
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Copyright (c) 2005 Christer Weinigel <christer@weinigel.se>
+ * Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
  *
  * There is a wiki with more information about the n30 port at
  * http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
@@ -11,36 +12,42 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
+
 #include <linux/delay.h>
-#include <linux/serial_core.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/kthread.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <linux/serial_core.h>
+#include <linux/timer.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/fb.h>
+#include <asm/arch/leds-gpio.h>
 #include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
 #include <asm/plat-s3c/iic.h>
+#include <asm/plat-s3c/regs-serial.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/udc.h>
 
 static struct map_desc n30_iodesc[] __initdata = {
 	/* nothing here yet */
@@ -64,7 +71,8 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
 		.ulcon	     = 0x43,
 		.ufcon	     = 0x51,
 	},
-	/* The BlueTooth controller is connected to port 2 */
+	/* On the N30 the bluetooth controller is connected here.
+	 * On the N35 and variants the GPS receiver is connected here. */
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
@@ -74,13 +82,260 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
 	},
 };
 
+static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+	switch (cmd) {
+	case S3C2410_UDC_P_ENABLE :
+		s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+		break;
+	case S3C2410_UDC_P_DISABLE :
+		s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+		break;
+	case S3C2410_UDC_P_RESET :
+		break;
+	default:
+		break;
+	}
+}
+
+static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
+	.udc_command		= n30_udc_pullup,
+	.vbus_pin		= S3C2410_GPG1,
+	.vbus_pin_inverted	= 0,
+};
+
+static struct gpio_keys_button n30_buttons[] = {
+	{
+		.gpio		= S3C2410_GPF0,
+		.code		= KEY_POWER,
+		.desc		= "Power",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG9,
+		.code		= KEY_UP,
+		.desc		= "Thumbwheel Up",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG8,
+		.code		= KEY_DOWN,
+		.desc		= "Thumbwheel Down",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG7,
+		.code		= KEY_ENTER,
+		.desc		= "Thumbwheel Press",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF7,
+		.code		= KEY_HOMEPAGE,
+		.desc		= "Home",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF6,
+		.code		= KEY_CALENDAR,
+		.desc		= "Calendar",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF5,
+		.code		= KEY_ADDRESSBOOK,
+		.desc		= "Contacts",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF4,
+		.code		= KEY_MAIL,
+		.desc		= "Mail",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data n30_button_data = {
+	.buttons	= n30_buttons,
+	.nbuttons	= ARRAY_SIZE(n30_buttons),
+};
+
+static struct platform_device n30_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &n30_button_data,
+	}
+};
+
+static struct gpio_keys_button n35_buttons[] = {
+	{
+		.gpio		= S3C2410_GPF0,
+		.code		= KEY_POWER,
+		.desc		= "Power",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG9,
+		.code		= KEY_UP,
+		.desc		= "Joystick Up",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG8,
+		.code		= KEY_DOWN,
+		.desc		= "Joystick Down",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG6,
+		.code		= KEY_DOWN,
+		.desc		= "Joystick Left",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG5,
+		.code		= KEY_DOWN,
+		.desc		= "Joystick Right",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG7,
+		.code		= KEY_ENTER,
+		.desc		= "Joystick Press",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF7,
+		.code		= KEY_HOMEPAGE,
+		.desc		= "Home",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF6,
+		.code		= KEY_CALENDAR,
+		.desc		= "Calendar",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF5,
+		.code		= KEY_ADDRESSBOOK,
+		.desc		= "Contacts",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF4,
+		.code		= KEY_MAIL,
+		.desc		= "Mail",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF3,
+		.code		= SW_RADIO,
+		.desc		= "GPS Antenna",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG2,
+		.code		= SW_HEADPHONE_INSERT,
+		.desc		= "Headphone",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data n35_button_data = {
+	.buttons	= n35_buttons,
+	.nbuttons	= ARRAY_SIZE(n35_buttons),
+};
+
+static struct platform_device n35_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &n35_button_data,
+	}
+};
+
+/* This is the bluetooth LED on the device. */
+static struct s3c24xx_led_platdata n30_blue_led_pdata = {
+	.name		= "blue_led",
+	.gpio		= S3C2410_GPG6,
+	.def_trigger	= "",
+};
+
+/* This LED is driven by the battery microcontroller, and is blinking
+ * red, blinking green or solid green when the battery is low,
+ * charging or full respectively.  By driving GPD9 low, it's possible
+ * to force the LED to blink red, so call that warning LED.  */
+static struct s3c24xx_led_platdata n30_warning_led_pdata = {
+	.name		= "warning_led",
+	.flags          = S3C24XX_LEDF_ACTLOW,
+	.gpio		= S3C2410_GPD9,
+	.def_trigger	= "",
+};
+
+static struct platform_device n30_blue_led = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &n30_blue_led_pdata,
+	},
+};
+
+static struct platform_device n30_warning_led = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &n30_warning_led_pdata,
+	},
+};
+
+static struct s3c2410fb_display n30_display __initdata = {
+	.type		= S3C2410_LCDCON1_TFT,
+	.width		= 240,
+	.height		= 320,
+	.pixclock	= 170000,
+
+	.xres		= 240,
+	.yres		= 320,
+	.bpp		= 16,
+	.left_margin	= 3,
+	.right_margin	= 40,
+	.hsync_len	= 40,
+	.upper_margin	= 2,
+	.lower_margin	= 3,
+	.vsync_len	= 2,
+
+	.lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
+};
+
+static struct s3c2410fb_mach_info n30_fb_info __initdata = {
+	.displays	= &n30_display,
+	.num_displays	= 1,
+	.default_display = 0,
+	.lpcsel		= 0x06,
+};
+
 static struct platform_device *n30_devices[] __initdata = {
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
 	&s3c_device_usb,
+	&s3c_device_usbgadget,
+	&n30_button_device,
+	&n30_blue_led,
+	&n30_warning_led,
+};
+
+static struct platform_device *n35_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
+	&n35_button_device,
 };
 
 static struct s3c2410_platform_i2c n30_i2ccfg = {
@@ -90,9 +345,148 @@ static struct s3c2410_platform_i2c n30_i2ccfg = {
 	.max_freq	= 10*1000,
 };
 
+/* Lots of hardcoded stuff, but it sets up the hardware in a useful
+ * state so that we can boot Linux directly from flash. */
+static void __init n30_hwinit(void)
+{
+	/* GPA0-11 special functions -- unknown what they do
+	 * GPA12 N30 special function -- unknown what it does
+	 *       N35/PiN output -- unknown what it does
+	 *
+	 * A12 is nGCS1 on the N30 and an output on the N35/PiN.  I
+	 * don't think it does anything useful on the N30, so I ought
+	 * to make it an output there too since it always driven to 0
+	 * as far as I can tell. */
+	if (machine_is_n30())
+		__raw_writel(0x007fffff, S3C2410_GPACON);
+	if (machine_is_n35())
+		__raw_writel(0x007fefff, S3C2410_GPACON);
+	__raw_writel(0x00000000, S3C2410_GPADAT);
+
+	/* GPB0 TOUT0 backlight level
+	 * GPB1 output 1=backlight on
+	 * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled
+	 * GPB3 output USB D+ pull up 0=disabled, 1=enabled
+	 * GPB4 N30 output -- unknown function
+	 *      N30/PiN GPS control 0=GPS enabled, 1=GPS disabled
+	 * GPB5 output -- unknown function
+	 * GPB6 input -- unknown function
+	 * GPB7 output -- unknown function
+	 * GPB8 output -- probably LCD driver enable
+	 * GPB9 output -- probably LCD VSYNC driver enable
+	 * GPB10 output -- probably LCD HSYNC driver enable
+	 */
+	__raw_writel(0x00154556, S3C2410_GPBCON);
+	__raw_writel(0x00000750, S3C2410_GPBDAT);
+	__raw_writel(0x00000073, S3C2410_GPBUP);
+
+	/* GPC0 input RS232 DCD/DSR/RI
+	 * GPC1 LCD
+	 * GPC2 output RS232 DTR?
+	 * GPC3 input RS232 DCD/DSR/RI
+	 * GPC4 LCD
+	 * GPC5 output 0=NAND write enabled, 1=NAND write protect
+	 * GPC6 input -- unknown function
+	 * GPC7 input charger status 0=charger connected
+	 *      this input can be triggered by power on the USB device
+	 *      port too, but will go back to disconnected soon after.
+	 * GPC8 N30/N35 output -- unknown function, always driven to 1
+	 *      PiN input -- unknown function, always read as 1
+	 *      Make it an input with a pull up for all models.
+	 * GPC9-15 LCD
+	 */
+	__raw_writel(0xaaa80618, S3C2410_GPCCON);
+	__raw_writel(0x0000014c, S3C2410_GPCDAT);
+	__raw_writel(0x0000fef2, S3C2410_GPCUP);
+
+	/* GPD0 input -- unknown function
+	 * GPD1-D7 LCD
+	 * GPD8 N30 output -- unknown function
+	 *      N35/PiN output 1=GPS LED on
+	 * GPD9 output 0=power led blinks red, 1=normal power led function
+	 * GPD10 output -- unknown function
+	 * GPD11-15 LCD drivers
+	 */
+	__raw_writel(0xaa95aaa4, S3C2410_GPDCON);
+	__raw_writel(0x00000601, S3C2410_GPDDAT);
+	__raw_writel(0x0000fbfe, S3C2410_GPDUP);
+
+	/* GPE0-4 I2S audio bus
+	 * GPE5-10 SD/MMC bus
+	 * E11-13 outputs -- unknown function, probably power management
+	 * E14-15 I2C bus connected to the battery controller
+	 */
+	__raw_writel(0xa56aaaaa, S3C2410_GPECON);
+	__raw_writel(0x0000efc5, S3C2410_GPEDAT);
+	__raw_writel(0x0000f81f, S3C2410_GPEUP);
+
+	/* GPF0  input 0=power button pressed
+	 * GPF1  input SD/MMC switch 0=card present
+	 * GPF2  N30 1=reset button pressed (inverted compared to the rest)
+	 *	 N35/PiN 0=reset button pressed
+	 * GPF3  N30/PiN input -- unknown function
+	 *       N35 input GPS antenna position, 0=antenna closed, 1=open
+	 * GPF4  input 0=button 4 pressed
+	 * GPF5  input 0=button 3 pressed
+	 * GPF6  input 0=button 2 pressed
+	 * GPF7  input 0=button 1 pressed
+	 */
+	__raw_writel(0x0000aaaa, S3C2410_GPFCON);
+	__raw_writel(0x00000000, S3C2410_GPFDAT);
+	__raw_writel(0x000000ff, S3C2410_GPFUP);
+
+	/* GPG0  input RS232 DCD/DSR/RI
+	 * GPG1  input 1=USB gadget port has power from a host
+	 * GPG2  N30 input -- unknown function
+	 *       N35/PiN input 0=headphones plugged in, 1=not plugged in
+	 * GPG3  N30 output -- unknown function
+	 *       N35/PiN input with unknown function
+	 * GPG4  N30 output 0=MMC enabled, 1=MMC disabled
+	 * GPG5  N30 output 0=BlueTooth chip disabled, 1=enabled
+	 *       N35/PiN input joystick right
+	 * GPG6  N30 output 0=blue led on, 1=off
+	 *       N35/PiN input joystick left
+	 * GPG7  input 0=thumbwheel pressed
+	 * GPG8  input 0=thumbwheel down
+	 * GPG9  input 0=thumbwheel up
+	 * GPG10 input SD/MMC write protect switch
+	 * GPG11 N30 input -- unknown function
+	 *       N35 output 0=GPS antenna powered, 1=not powered
+	 *       PiN output -- unknown function
+	 * GPG12-15 touch screen functions
+	 *
+	 * The pullups differ between the models, so enable all
+	 * pullups that are enabled on any of the models.
+	 */
+	if (machine_is_n30())
+		__raw_writel(0xff0a956a, S3C2410_GPGCON);
+	if (machine_is_n35())
+		__raw_writel(0xff4aa92a, S3C2410_GPGCON);
+	__raw_writel(0x0000e800, S3C2410_GPGDAT);
+	__raw_writel(0x0000f86f, S3C2410_GPGUP);
+
+	/* GPH0/1/2/3 RS232 serial port
+	 * GPH4/5 IrDA serial port
+	 * GPH6/7  N30 BlueTooth serial port
+	 *         N35/PiN GPS receiver
+	 * GPH8 input -- unknown function
+	 * GPH9 CLKOUT0 HCLK -- unknown use
+	 * GPH10 CLKOUT1 FCLK -- unknown use
+	 *
+	 * The pull ups for H6/H7 are enabled on N30 but not on the
+	 * N35/PiN.  I suppose is useful for a budget model of the N30
+	 * with no bluetooh.  It doesn't hurt to have the pull ups
+	 * enabled on the N35, so leave them enabled for all models.
+	 */
+	__raw_writel(0x0028aaaa, S3C2410_GPHCON);
+	__raw_writel(0x000005ef, S3C2410_GPHDAT);
+	__raw_writel(0x0000063f, S3C2410_GPHUP);
+}
+
 static void __init n30_map_io(void)
 {
 	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
+	n30_hwinit();
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 }
@@ -106,7 +500,9 @@ static void __init n30_init_irq(void)
 
 static void __init n30_init(void)
 {
+	s3c24xx_fb_set_platdata(&n30_fb_info);
 	s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
+	s3c24xx_udc_set_platdata(&n30_udc_cfg);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -115,7 +511,32 @@ static void __init n30_init(void)
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
+	if (machine_is_n30()) {
+		/* Turn off suspend on both USB ports, and switch the
+		 * selectable USB port to USB device mode. */
+		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+				      S3C2410_MISCCR_USBSUSPND0 |
+				      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+		platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
+	}
+
+	if (machine_is_n35()) {
+		/* Turn off suspend and switch the selectable USB port
+		 * to USB device mode.  Turn on suspend for the host
+		 * port since it is not connected on the N35.
+		 *
+		 * Actually, the host port is available at some pads
+		 * on the back of the device, so it would actually be
+		 * possible to add a USB device inside the N35 if you
+		 * are willing to do some hardware modifications. */
+		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+				      S3C2410_MISCCR_USBSUSPND0 |
+				      S3C2410_MISCCR_USBSUSPND1,
+				      S3C2410_MISCCR_USBSUSPND1);
+
+		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
+	}
 }
 
 MACHINE_START(N30, "Acer-N30")
@@ -131,9 +552,14 @@ MACHINE_START(N30, "Acer-N30")
 	.map_io		= n30_map_io,
 MACHINE_END
 
-/*
-    Local variables:
-        compile-command: "make ARCH=arm CROSS_COMPILE=/usr/local/arm/3.3.2/bin/arm-linux- -k -C ../../.."
-        c-basic-offset: 8
-    End:
-*/
+MACHINE_START(N35, "Acer-N35")
+	/* Maintainer: Christer Weinigel <christer@weinigel.se>
+	*/
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.timer		= &s3c24xx_timer,
+	.init_machine	= n30_init,
+	.init_irq	= n30_init_irq,
+	.map_io		= n30_map_io,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 4c4b5c4207c4..9a0965ac5e11 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-vr1000.c
  *
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -19,6 +19,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/dm9000.h>
+#include <linux/i2c.h>
 
 #include <linux/serial.h>
 #include <linux/tty.h>
@@ -46,7 +47,9 @@
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
+
 #include "usb-simtec.h"
+#include "nor-simtec.h"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -97,34 +100,6 @@ static struct map_desc vr1000_iodesc[] __initdata = {
 	  .length	= SZ_1M,
 	  .type		= MT_DEVICE,
   },
-
-  /* peripheral space... one for each of fast/slow/byte/16bit */
-  /* note, ide is only decoded in word space, even though some registers
-   * are only 8bit */
-
-  /* slow, byte */
-  { VA_C2(VR1000_VA_IDEPRI),  PA_CS3(VR1000_PA_IDEPRI),	  SZ_1M,  MT_DEVICE },
-  { VA_C2(VR1000_VA_IDESEC),  PA_CS3(VR1000_PA_IDESEC),	  SZ_1M,  MT_DEVICE },
-  { VA_C2(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C2(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
-
-  /* slow, word */
-  { VA_C3(VR1000_VA_IDEPRI),  PA_CS3(VR1000_PA_IDEPRI),	  SZ_1M,  MT_DEVICE },
-  { VA_C3(VR1000_VA_IDESEC),  PA_CS3(VR1000_PA_IDESEC),	  SZ_1M,  MT_DEVICE },
-  { VA_C3(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C3(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
-
-  /* fast, byte */
-  { VA_C4(VR1000_VA_IDEPRI),  PA_CS5(VR1000_PA_IDEPRI),	  SZ_1M,  MT_DEVICE },
-  { VA_C4(VR1000_VA_IDESEC),  PA_CS5(VR1000_PA_IDESEC),	  SZ_1M,  MT_DEVICE },
-  { VA_C4(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C4(VR1000_VA_IDESECAUX), PA_CS5(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
-
-  /* fast, word */
-  { VA_C5(VR1000_VA_IDEPRI),  PA_CS5(VR1000_PA_IDEPRI),	  SZ_1M,  MT_DEVICE },
-  { VA_C5(VR1000_VA_IDESEC),  PA_CS5(VR1000_PA_IDESEC),	  SZ_1M,  MT_DEVICE },
-  { VA_C5(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C5(VR1000_VA_IDESECAUX), PA_CS5(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -230,23 +205,6 @@ static struct platform_device serial_device = {
 	},
 };
 
-/* MTD NOR Flash */
-
-static struct resource vr1000_nor_resource[] = {
-	[0] = {
-		.start	= S3C2410_CS1 + 0x4000000,
-		.end	= S3C2410_CS1 + 0x4000000 + SZ_16M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device vr1000_nor = {
-	.name		= "bast-nor",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vr1000_nor_resource),
-	.resource	= vr1000_nor_resource,
-};
-
 /* DM9000 ethernet devices */
 
 static struct resource vr1000_dm9k0_resource[] = {
@@ -263,7 +221,7 @@ static struct resource vr1000_dm9k0_resource[] = {
 	[2] = {
 		.start = IRQ_VR1000_DM9000A,
 		.end   = IRQ_VR1000_DM9000A,
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	}
 
 };
@@ -282,7 +240,7 @@ static struct resource vr1000_dm9k1_resource[] = {
 	[2] = {
 		.start = IRQ_VR1000_DM9000N,
 		.end   = IRQ_VR1000_DM9000N,
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	}
 };
 
@@ -358,6 +316,18 @@ static struct platform_device vr1000_led3 = {
 	},
 };
 
+/* I2C devices. */
+
+static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	}, {
+		I2C_BOARD_INFO("tmp101", 0x48),
+	}, {
+		I2C_BOARD_INFO("m41st87", 0x68),
+	},
+};
+
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
@@ -367,7 +337,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&s3c_device_i2c,
 	&s3c_device_adc,
 	&serial_device,
-	&vr1000_nor,
 	&vr1000_dm9k0,
 	&vr1000_dm9k1,
 	&vr1000_led1,
@@ -416,6 +385,11 @@ static void __init vr1000_map_io(void)
 static void __init vr1000_init(void)
 {
 	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
+
+	i2c_register_board_info(0, vr1000_i2c_devs,
+				ARRAY_SIZE(vr1000_i2c_devs));
+
+	nor_simtec_init();
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
new file mode 100644
index 000000000000..f44e21b9c3ba
--- /dev/null
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-s3c2410/nor-simtec.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec NOR mapping
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-cpld.h>
+
+
+static void simtec_nor_vpp(struct map_info *map, int vpp)
+{
+	unsigned int val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = __raw_readb(BAST_VA_CTRL3);
+
+	printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
+
+	if (vpp)
+		val |= BAST_CPLD_CTRL3_ROMWEN;
+	else
+		val &= ~BAST_CPLD_CTRL3_ROMWEN;
+
+	__raw_writeb(val, BAST_VA_CTRL3);
+	local_irq_restore(flags);
+}
+
+struct physmap_flash_data simtec_nor_pdata = {
+	.width		= 2,
+	.set_vpp	= simtec_nor_vpp,
+	.nr_parts	= 0,
+};
+
+static struct resource simtec_nor_resource[] = {
+	[0] = {
+		.start = S3C2410_CS1 + 0x4000000,
+		.end   = S3C2410_CS1 + 0x4000000 + SZ_8M - 1,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device simtec_device_nor = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(simtec_nor_resource),
+	.resource	= simtec_nor_resource,
+	.dev		= {
+		.platform_data = &simtec_nor_pdata,
+	},
+};
+
+void __init nor_simtec_init(void)
+{
+	int ret;
+
+	ret = platform_device_register(&simtec_device_nor);
+	if (ret < 0)
+		printk(KERN_ERR "failed to register physmap-flash device\n");
+	else
+		simtec_nor_vpp(NULL, 1);
+}
diff --git a/arch/arm/mach-s3c2410/nor-simtec.h b/arch/arm/mach-s3c2410/nor-simtec.h
new file mode 100644
index 000000000000..f619c1e0d0c8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/nor-simtec.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s3c2410/nor-simtec.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec NOR mapping
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void nor_simtec_init(void);
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 0b43431d4b75..c59a9d2ee9a6 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -34,6 +34,16 @@ config S3C2412_PM
 
 menu "S3C2412 Machines"
 
+config MACH_JIVE
+	bool "Logitech Jive"
+	select CPU_S3C2412
+	help
+	  Say Y here if you are using the Logitech Jive.
+
+config MACH_JIVE_SHOW_BOOTLOADER
+	bool "Allow access to bootloader partitions in MTD"
+	depends on MACH_JIVE && EXPERIMENTAL
+
 config MACH_SMDK2413
 	bool "SMDK2413"
 	select CPU_S3C2412
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 267f3348301e..20918d5dc6a9 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -18,5 +18,6 @@ obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
 
 # Machine support
 
+obj-$(CONFIG_MACH_JIVE)		+= mach-jive.o
 obj-$(CONFIG_MACH_SMDK2413)	+= mach-smdk2413.o
 obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 2697a65ba727..1157b5a16263 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -631,6 +631,17 @@ static struct clk_init clks_src[] __initdata = {
 		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
 		.src_0	= &clk_usysclk,
 		.src_1	= &clk_h,
+	/* here we assume  OM[4] select xtal */
+	}, {
+		.clk	= &clk_erefclk,
+		.bit	= S3C2412_CLKSRC_EREFCLK_EXTCLK,
+		.src_0	= &clk_xtal,
+		.src_1	= &clk_ext,
+	}, {
+		.clk	= &clk_urefclk,
+		.bit	= S3C2412_CLKSRC_UREFCLK_EXTCLK,
+		.src_0	= &clk_xtal,
+		.src_1	= &clk_ext,
 	},
 };
 
@@ -666,8 +677,6 @@ static void __init s3c2412_clk_initparents(void)
 static struct clk *clks[] __initdata = {
 	&clk_ext,
 	&clk_usb_bus,
-	&clk_erefclk,
-	&clk_urefclk,
 	&clk_mrefclk,
 	&clk_armclk,
 };
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
new file mode 100644
index 000000000000..7f5924713485
--- /dev/null
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -0,0 +1,687 @@
+/* linux/arch/arm/mach-s3c2410/mach-jive.c
+ *
+ * Copyright 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <video/ili9320.h>
+
+#include <linux/spi/spi.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/plat-s3c/nand.h>
+#include <asm/plat-s3c/iic.h>
+
+#include <asm/arch/regs-power.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/spi-gpio.h>
+#include <asm/arch/fb.h>
+
+#include <asm/mach-types.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/udc.h>
+
+static struct map_desc jive_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg jive_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* Jive flash assignment
+ *
+ * 0x00000000-0x00028000 : uboot
+ * 0x00028000-0x0002c000 : uboot env
+ * 0x0002c000-0x00030000 : spare
+ * 0x00030000-0x00200000 : zimage A
+ * 0x00200000-0x01600000 : cramfs A
+ * 0x01600000-0x017d0000 : zimage B
+ * 0x017d0000-0x02bd0000 : cramfs B
+ * 0x02bd0000-0x03fd0000 : yaffs
+ */
+static struct mtd_partition jive_imageA_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+	/* Don't allow access to the bootloader from linux */
+	{
+		.name           = "uboot",
+		.offset         = 0,
+		.size           = (160 * SZ_1K),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+
+	/* spare */
+        {
+                .name           = "spare",
+                .offset         = (176 * SZ_1K),
+                .size           = (16 * SZ_1K),
+        },
+#endif
+
+	/* booted images */
+        {
+		.name		= "kernel (ro)",
+		.offset		= (192 * SZ_1K),
+		.size		= (SZ_2M) - (192 * SZ_1K),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+        }, {
+                .name           = "root (ro)",
+                .offset         = (SZ_2M),
+                .size           = (20 * SZ_1M),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+        },
+
+	/* yaffs */
+	{
+		.name		= "yaffs",
+		.offset		= (44 * SZ_1M),
+		.size		= (20 * SZ_1M),
+	},
+
+	/* bootloader environment */
+	{
+                .name		= "env",
+		.offset		= (160 * SZ_1K),
+		.size		= (16 * SZ_1K),
+	},
+
+	/* upgrade images */
+        {
+		.name		= "zimage",
+		.offset		= (22 * SZ_1M),
+		.size		= (2 * SZ_1M) - (192 * SZ_1K),
+        }, {
+		.name		= "cramfs",
+		.offset		= (24 * SZ_1M) - (192*SZ_1K),
+		.size		= (20 * SZ_1M),
+        },
+};
+
+static struct mtd_partition jive_imageB_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+	/* Don't allow access to the bootloader from linux */
+	{
+		.name           = "uboot",
+		.offset         = 0,
+		.size           = (160 * SZ_1K),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+
+	/* spare */
+        {
+                .name           = "spare",
+                .offset         = (176 * SZ_1K),
+                .size           = (16 * SZ_1K),
+        },
+#endif
+
+	/* booted images */
+        {
+		.name           = "kernel (ro)",
+		.offset         = (22 * SZ_1M),
+		.size           = (2 * SZ_1M) - (192 * SZ_1K),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+        },
+	{
+		.name		= "root (ro)",
+		.offset		= (24 * SZ_1M) - (192 * SZ_1K),
+                .size		= (20 * SZ_1M),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+
+	/* yaffs */
+	{
+		.name		= "yaffs",
+		.offset		= (44 * SZ_1M),
+		.size		= (20 * SZ_1M),
+        },
+
+	/* bootloader environment */
+	{
+		.name		= "env",
+		.offset		= (160 * SZ_1K),
+		.size		= (16 * SZ_1K),
+	},
+
+	/* upgrade images */
+	{
+		.name		= "zimage",
+		.offset		= (192 * SZ_1K),
+		.size		= (2 * SZ_1M) - (192 * SZ_1K),
+        }, {
+		.name		= "cramfs",
+		.offset		= (2 * SZ_1M),
+		.size		= (20 * SZ_1M),
+        },
+};
+
+static struct s3c2410_nand_set jive_nand_sets[] = {
+	[0] = {
+		.name           = "flash",
+		.nr_chips       = 1,
+		.nr_partitions  = ARRAY_SIZE(jive_imageA_nand_part),
+		.partitions     = jive_imageA_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand jive_nand_info = {
+	/* set taken from osiris nand timings, possibly still conservative */
+	.tacls		= 30,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.sets		= jive_nand_sets,
+	.nr_sets	= ARRAY_SIZE(jive_nand_sets),
+};
+
+static int __init jive_mtdset(char *options)
+{
+	struct s3c2410_nand_set *nand = &jive_nand_sets[0];
+	unsigned long set;
+
+	if (options == NULL || options[0] == '\0')
+		return 0;
+
+	if (strict_strtoul(options, 10, &set)) {
+		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
+		return 0;
+	}
+
+	switch (set) {
+	case 1:
+		nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
+		nand->partitions = jive_imageB_nand_part;
+	case 0:
+		/* this is already setup in the nand info */
+		break;
+	default:
+		printk(KERN_ERR "Unknown mtd set %ld specified,"
+		       "using default.", set);
+	}
+
+	return 0;
+}
+
+/* parse the mtdset= option given to the kernel command line */
+__setup("mtdset=", jive_mtdset);
+
+/* LCD timing and setup */
+
+#define LCD_XRES	 (240)
+#define LCD_YRES	 (320)
+#define LCD_LEFT_MARGIN  (12)
+#define LCD_RIGHT_MARGIN (12)
+#define LCD_LOWER_MARGIN (12)
+#define LCD_UPPER_MARGIN (12)
+#define LCD_VSYNC	 (2)
+#define LCD_HSYNC	 (2)
+
+#define LCD_REFRESH	 (60)
+
+#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
+#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
+
+struct s3c2410fb_display jive_vgg2432a4_display[] = {
+	[0] = {
+		.width		= LCD_XRES,
+		.height		= LCD_YRES,
+		.xres		= LCD_XRES,
+		.yres		= LCD_YRES,
+		.left_margin	= LCD_LEFT_MARGIN,
+		.right_margin	= LCD_RIGHT_MARGIN,
+		.upper_margin	= LCD_UPPER_MARGIN,
+		.lower_margin	= LCD_LOWER_MARGIN,
+		.hsync_len	= LCD_HSYNC,
+		.vsync_len	= LCD_VSYNC,
+
+		.pixclock	= (1000000000000LL /
+				   (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
+
+		.bpp		= 16,
+		.type		= (S3C2410_LCDCON1_TFT16BPP |
+				   S3C2410_LCDCON1_TFT),
+
+		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
+				   S3C2410_LCDCON5_INVVLINE |
+				   S3C2410_LCDCON5_INVVFRAME |
+				   S3C2410_LCDCON5_INVVDEN |
+				   S3C2410_LCDCON5_PWREN),
+	},
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
+
+struct s3c2410fb_mach_info jive_lcd_config = {
+	.displays	 = jive_vgg2432a4_display,
+	.num_displays	 = ARRAY_SIZE(jive_vgg2432a4_display),
+	.default_display = 0,
+
+	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+	 * and disable the pull down resistors on pins we are using for LCD
+	 * data. */
+
+	.gpcup		= (0xf << 1) | (0x3f << 10),
+
+	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
+			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
+			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
+			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
+
+	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
+			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
+			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+	.gpdup		= (0x3f << 2) | (0x3f << 10),
+
+	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
+			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
+			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
+			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
+			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
+			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
+			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+};
+
+/* ILI9320 support. */
+
+static void jive_lcm_reset(unsigned int set)
+{
+	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
+
+	s3c2410_gpio_setpin(S3C2410_GPG13, set);
+	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+}
+
+#undef LCD_UPPER_MARGIN
+#define LCD_UPPER_MARGIN 2
+
+static struct ili9320_platdata jive_lcm_config = {
+	.hsize		= LCD_XRES,
+	.vsize		= LCD_YRES,
+
+	.reset		= jive_lcm_reset,
+	.suspend	= ILI9320_SUSPEND_DEEP,
+
+	.entry_mode	= ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
+	.display2	= (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
+			   ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
+	.display3	= 0x0,
+	.display4	= 0x0,
+	.rgb_if1	= (ILI9320_RGBIF1_RIM_RGB18 |
+			   ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
+	.rgb_if2	= ILI9320_RGBIF2_DPL,
+	.interface2	= 0x0,
+	.interface3	= 0x3,
+	.interface4	= (ILI9320_INTERFACE4_RTNE(16) |
+			   ILI9320_INTERFACE4_DIVE(1)),
+	.interface5	= 0x0,
+	.interface6	= 0x0,
+};
+
+/* LCD SPI support */
+
+static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
+{
+	s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+}
+
+static struct s3c2410_spigpio_info jive_lcd_spi = {
+	.bus_num	= 0,
+	.pin_clk	= S3C2410_GPG8,
+	.pin_mosi	= S3C2410_GPB8,
+	.chip_select	= jive_lcd_spi_chipselect,
+};
+
+static struct platform_device jive_device_lcdspi = {
+	.name		= "s3c24xx-spi-gpio",
+	.id		= 1,
+	.num_resources  = 0,
+	.dev.platform_data = &jive_lcd_spi,
+};
+
+/* WM8750 audio code SPI definition */
+
+static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
+{
+	s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+}
+
+static struct s3c2410_spigpio_info jive_wm8750_spi = {
+	.bus_num	= 2,
+	.pin_clk	= S3C2410_GPB4,
+	.pin_mosi	= S3C2410_GPB9,
+	.chip_select	= jive_wm8750_chipselect,
+};
+
+static struct platform_device jive_device_wm8750 = {
+	.name		= "s3c24xx-spi-gpio",
+	.id		= 2,
+	.num_resources  = 0,
+	.dev.platform_data = &jive_wm8750_spi,
+};
+
+/* JIVE SPI devices. */
+
+static struct spi_board_info __initdata jive_spi_devs[] = {
+	[0] = {
+		.modalias	= "VGG2432A4",
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_3,	/* CPOL=1, CPHA=1 */
+		.max_speed_hz	= 100000,
+		.platform_data	= &jive_lcm_config,
+	}, {
+		.modalias	= "WM8750",
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,	/* CPOL=0, CPHA=0 */
+		.max_speed_hz	= 100000,
+	},
+};
+
+/* I2C bus and device configuration. */
+
+static struct s3c2410_platform_i2c jive_i2c_cfg = {
+	.max_freq	= 80 * 1000,
+	.bus_freq	= 50 * 1000,
+	.flags		= S3C_IICFLG_FILTER,
+	.sda_delay	= 2,
+};
+
+static struct i2c_board_info jive_i2c_devs[] = {
+	[0] = {
+		I2C_BOARD_INFO("lis302dl", 0x1c),
+		.irq	= IRQ_EINT14,
+	},
+};
+
+/* The platform devices being used. */
+
+static struct platform_device *jive_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_lcd,
+	&jive_device_lcdspi,
+	&jive_device_wm8750,
+	&s3c_device_nand,
+	&s3c_device_usbgadget,
+};
+
+static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
+	.vbus_pin	= S3C2410_GPG1,		/* detect is on GPG1 */
+};
+
+/* Jive power management device */
+
+#ifdef CONFIG_PM
+static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
+{
+	/* Write the magic value u-boot uses to check for resume into
+	 * the INFORM0 register, and ensure INFORM1 is set to the
+	 * correct address to resume from. */
+
+	__raw_writel(0x2BED, S3C2412_INFORM0);
+	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1);
+
+	return 0;
+}
+
+static int jive_pm_resume(struct sys_device *sd)
+{
+	__raw_writel(0x0, S3C2412_INFORM0);
+	return 0;
+}
+
+#else
+#define jive_pm_suspend NULL
+#define jive_pm_resume NULL
+#endif
+
+static struct sysdev_class jive_pm_sysclass = {
+	.name		= "jive-pm",
+	.suspend	= jive_pm_suspend,
+	.resume		= jive_pm_resume,
+};
+
+static struct sys_device jive_pm_sysdev = {
+	.cls		= &jive_pm_sysclass,
+};
+
+static void __init jive_map_io(void)
+{
+	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+}
+
+static void jive_power_off(void)
+{
+	printk(KERN_INFO "powering system down...\n");
+
+	s3c2410_gpio_setpin(S3C2410_GPC5, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+}
+
+static void __init jive_machine_init(void)
+{
+	/* register system devices for managing low level suspend */
+
+	sysdev_class_register(&jive_pm_sysclass);
+	sysdev_register(&jive_pm_sysdev);
+
+	/* write our sleep configurations for the IO. Pull down all unused
+	 * IO, ensure that we have turned off all peripherals we do not
+	 * need, and configure the ones we do need. */
+
+	/* Port B sleep */
+
+	__raw_writel(S3C2412_SLPCON_IN(0)   |
+		     S3C2412_SLPCON_PULL(1) |
+		     S3C2412_SLPCON_HIGH(2) |
+		     S3C2412_SLPCON_PULL(3) |
+		     S3C2412_SLPCON_PULL(4) |
+		     S3C2412_SLPCON_PULL(5) |
+		     S3C2412_SLPCON_PULL(6) |
+		     S3C2412_SLPCON_HIGH(7) |
+		     S3C2412_SLPCON_PULL(8) |
+		     S3C2412_SLPCON_PULL(9) |
+		     S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
+
+	/* Port C sleep */
+
+	__raw_writel(S3C2412_SLPCON_PULL(0) |
+		     S3C2412_SLPCON_PULL(1) |
+		     S3C2412_SLPCON_PULL(2) |
+		     S3C2412_SLPCON_PULL(3) |
+		     S3C2412_SLPCON_PULL(4) |
+		     S3C2412_SLPCON_PULL(5) |
+		     S3C2412_SLPCON_LOW(6)  |
+		     S3C2412_SLPCON_PULL(6) |
+		     S3C2412_SLPCON_PULL(7) |
+		     S3C2412_SLPCON_PULL(8) |
+		     S3C2412_SLPCON_PULL(9) |
+		     S3C2412_SLPCON_PULL(10) |
+		     S3C2412_SLPCON_PULL(11) |
+		     S3C2412_SLPCON_PULL(12) |
+		     S3C2412_SLPCON_PULL(13) |
+		     S3C2412_SLPCON_PULL(14) |
+		     S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
+
+	/* Port D sleep */
+
+	__raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
+
+	/* Port F sleep */
+
+	__raw_writel(S3C2412_SLPCON_LOW(0)  |
+		     S3C2412_SLPCON_LOW(1)  |
+		     S3C2412_SLPCON_LOW(2)  |
+		     S3C2412_SLPCON_EINT(3) |
+		     S3C2412_SLPCON_EINT(4) |
+		     S3C2412_SLPCON_EINT(5) |
+		     S3C2412_SLPCON_EINT(6) |
+		     S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
+
+	/* Port G sleep */
+
+	__raw_writel(S3C2412_SLPCON_IN(0)    |
+		     S3C2412_SLPCON_IN(1)    |
+		     S3C2412_SLPCON_IN(2)    |
+		     S3C2412_SLPCON_IN(3)    |
+		     S3C2412_SLPCON_IN(4)    |
+		     S3C2412_SLPCON_IN(5)    |
+		     S3C2412_SLPCON_IN(6)    |
+		     S3C2412_SLPCON_IN(7)    |
+		     S3C2412_SLPCON_PULL(8)  |
+		     S3C2412_SLPCON_PULL(9)  |
+		     S3C2412_SLPCON_IN(10)   |
+		     S3C2412_SLPCON_PULL(11) |
+		     S3C2412_SLPCON_PULL(12) |
+		     S3C2412_SLPCON_PULL(13) |
+		     S3C2412_SLPCON_IN(14)   |
+		     S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
+
+	/* Port H sleep */
+
+	__raw_writel(S3C2412_SLPCON_PULL(0) |
+		     S3C2412_SLPCON_PULL(1) |
+		     S3C2412_SLPCON_PULL(2) |
+		     S3C2412_SLPCON_PULL(3) |
+		     S3C2412_SLPCON_PULL(4) |
+		     S3C2412_SLPCON_PULL(5) |
+		     S3C2412_SLPCON_PULL(6) |
+		     S3C2412_SLPCON_IN(7)   |
+		     S3C2412_SLPCON_IN(8)   |
+		     S3C2412_SLPCON_PULL(9) |
+		     S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
+
+	/* initialise the power management now we've setup everything. */
+
+	s3c2410_pm_init();
+
+	s3c_device_nand.dev.platform_data = &jive_nand_info;
+
+	/* initialise the spi */
+
+	s3c2410_gpio_setpin(S3C2410_GPG13, 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+
+	s3c2410_gpio_setpin(S3C2410_GPB7, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+
+	s3c2410_gpio_setpin(S3C2410_GPB6, 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+
+	s3c2410_gpio_setpin(S3C2410_GPG8, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+
+	/* initialise the WM8750 spi */
+
+	s3c2410_gpio_setpin(S3C2410_GPH10, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	s3c24xx_udc_set_platdata(&jive_udc_cfg);
+	s3c24xx_fb_set_platdata(&jive_lcd_config);
+
+	spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
+
+	s3c_device_i2c.dev.platform_data = &jive_i2c_cfg;
+	i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
+
+	pm_power_off = jive_power_off;
+
+	platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
+}
+
+MACHINE_START(JIVE, "JIVE")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= jive_map_io,
+	.init_machine	= jive_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index f1915bd61d15..25de042ab996 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -29,6 +29,7 @@ config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
 	select CPU_S3C2440
 	select PM_SIMTEC if PM
+	select HAVE_PATA_PLATFORM
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -67,6 +68,11 @@ config SMDK2440_CPU2440
 	default y if ARCH_S3C2440
 	select CPU_S3C2440
 
+config MACH_AT2440EVB
+	bool "Avantech AT2440EVB development board"
+	select CPU_S3C2440
+	help
+	  Say Y here if you are using the AT2440EVB development board
 
 endmenu
 
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index c81ed6248dcb..0b4440e79b90 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
 obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
 obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 47258915a2f9..09af8b23500b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
  *
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -17,6 +17,8 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
 
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
@@ -241,14 +243,18 @@ static struct s3c2410_platform_nand anubis_nand_info = {
 
 /* IDE channels */
 
+struct pata_platform_info anubis_ide_platdata = {
+	.ioport_shift	= 5,
+};
+
 static struct resource anubis_ide0_resource[] = {
 	{
 		.start	= S3C2410_CS3,
 		.end	= S3C2410_CS3 + (8*32) - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.start	= S3C2410_CS3 + (1<<26),
-		.end	= S3C2410_CS3 + (1<<26) + (8*32) - 1,
+		.start	= S3C2410_CS3 + (1<<26) + (6*32),
+		.end	= S3C2410_CS3 + (1<<26) + (7*32) - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_IDE0,
@@ -258,10 +264,14 @@ static struct resource anubis_ide0_resource[] = {
 };
 
 static struct platform_device anubis_device_ide0 = {
-	.name		= "simtec-ide",
+	.name		= "pata_platform",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
 	.resource	= anubis_ide0_resource,
+	.dev	= {
+		.platform_data = &anubis_ide_platdata,
+		.coherent_dma_mask = ~0,
+	},
 };
 
 static struct resource anubis_ide1_resource[] = {
@@ -270,8 +280,8 @@ static struct resource anubis_ide1_resource[] = {
 		.end	= S3C2410_CS4 + (8*32) - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.start	= S3C2410_CS4 + (1<<26),
-		.end	= S3C2410_CS4 + (1<<26) + (8*32) - 1,
+		.start	= S3C2410_CS4 + (1<<26) + (6*32),
+		.end	= S3C2410_CS4 + (1<<26) + (7*32) - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_IDE0,
@@ -280,12 +290,15 @@ static struct resource anubis_ide1_resource[] = {
 	},
 };
 
-
 static struct platform_device anubis_device_ide1 = {
-	.name		= "simtec-ide",
+	.name		= "pata_platform",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
 	.resource	= anubis_ide1_resource,
+	.dev	= {
+		.platform_data = &anubis_ide_platdata,
+		.coherent_dma_mask = ~0,
+	},
 };
 
 /* Asix AX88796 10/100 ethernet controller */
@@ -409,6 +422,15 @@ static struct clk *anubis_clocks[] = {
 	&s3c24xx_uclk,
 };
 
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("tps65011", 0x48),
+		.irq	= IRQ_EINT20,
+	}
+};
+
 static void __init anubis_map_io(void)
 {
 	/* initialise the clocks */
@@ -448,6 +470,9 @@ static void __init anubis_map_io(void)
 static void __init anubis_init(void)
 {
 	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+	i2c_register_board_info(0, anubis_i2c_devs,
+				ARRAY_SIZE(anubis_i2c_devs));
 }
 
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
new file mode 100644
index 000000000000..f5e3c7f27639
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -0,0 +1,198 @@
+/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
+ *
+ * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+ *      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+ *      and modifications by SBZ <sbz@spgui.org> and
+ *      Weibing <http://weibing.blogbus.com>
+ *
+ * For product information, visit http://www.arm9e.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/dm9000.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/plat-s3c/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct map_desc at2440evb_iodesc[] __initdata = {
+	/* Nothing here */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = {
+	[0] = {
+		.name		= "uclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	}
+};
+
+
+static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clocks	     = at2440evb_serial_clocks,
+		.clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clocks	     = at2440evb_serial_clocks,
+		.clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+	},
+};
+
+/* NAND Flash on AT2440EVB board */
+
+static struct mtd_partition at2440evb_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_256K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "Kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_256K,
+	},
+	[2] = {
+		.name	= "Root",
+		.offset	= SZ_256K + SZ_2M,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct s3c2410_nand_set at2440evb_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(at2440evb_default_nand_part),
+		.partitions	= at2440evb_default_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand at2440evb_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
+	.sets		= at2440evb_nand_sets,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource at2440evb_dm9k_resource[] = {
+	[0] = {
+		.start = S3C2410_CS3,
+		.end   = S3C2410_CS3 + 3,
+		.flags = IORESOURCE_MEM
+	},
+	[1] = {
+		.start = S3C2410_CS3 + 4,
+		.end   = S3C2410_CS3 + 7,
+		.flags = IORESOURCE_MEM
+	},
+	[2] = {
+		.start = IRQ_EINT7,
+		.end   = IRQ_EINT7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct dm9000_plat_data at2440evb_dm9k_pdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device at2440evb_device_eth = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(at2440evb_dm9k_resource),
+	.resource	= at2440evb_dm9k_resource,
+	.dev		= {
+		.platform_data	= &at2440evb_dm9k_pdata,
+	},
+};
+
+static struct platform_device *at2440evb_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+	&s3c_device_adc,
+	&s3c_device_i2c,
+	&s3c_device_rtc,
+	&s3c_device_nand,
+	&at2440evb_device_eth,
+};
+
+static void __init at2440evb_map_io(void)
+{
+	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
+
+	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
+	s3c24xx_init_clocks(16934400);
+	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+}
+
+static void __init at2440evb_init(void)
+{
+	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
+}
+
+
+MACHINE_START(AT2440EVB, "AT2440EVB")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= at2440evb_map_io,
+	.init_machine	= at2440evb_init,
+	.init_irq	= s3c24xx_init_irq,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 8a8acdbd072d..af996b0e91e8 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
  *
- * Copyright (c) 2005 Simtec Electronics
+ * Copyright (c) 2005,2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/clk.h>
+#include <linux/i2c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -322,6 +323,15 @@ static struct sys_device osiris_pm_sysdev = {
 	.cls		= &osiris_pm_sysclass,
 };
 
+/* I2C devices fitted. */
+
+static struct i2c_board_info osiris_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("tps65011", 0x48),
+		.irq	= IRQ_EINT20,
+	},
+};
+
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
@@ -388,6 +398,9 @@ static void __init osiris_init(void)
 	sysdev_class_register(&osiris_pm_sysclass);
 	sysdev_register(&osiris_pm_sysdev);
 
+	i2c_register_board_info(0, osiris_i2c_devs,
+				ARRAY_SIZE(osiris_i2c_devs));
+
 	platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
 };
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index b42f956738d0..17f064fabdaf 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -81,7 +81,7 @@ static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
 	else
 		clkcon &= ~clocks;
 
-	__raw_writel(clkcon, S3C2443_HCLKCON);
+	__raw_writel(clkcon, S3C2443_PCLKCON);
 
 	return 0;
 }
@@ -221,7 +221,6 @@ static struct clk clk_mdivclk = {
 	.get_rate	= s3c2443_getrate_mdivclk,
 };
 
-
 static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
 {
 	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
@@ -249,6 +248,46 @@ static struct clk clk_msysclk = {
 	.set_parent	= s3c2443_setparent_msysclk,
 };
 
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+*/
+
+static struct clk clk_armdiv = {
+	.name		= "armdiv",
+	.id		= -1,
+	.parent		= &clk_msysclk,
+};
+
+/* armclk
+ *
+ * this is the clock fed into the ARM core itself, either from
+ * armdiv or from hclk.
+ */
+
+static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+	unsigned long clkdiv0;
+
+	clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+	if (parent == &clk_armdiv)
+		clkdiv0 &= ~S3C2443_CLKDIV0_DVS;
+	else if (parent == &clk_h)
+		clkdiv0 |= S3C2443_CLKDIV0_DVS;
+	else
+		return -EINVAL;
+
+	__raw_writel(clkdiv0, S3C2443_CLKDIV0);
+	return 0;
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.set_parent	= s3c2443_setparent_armclk,
+};
 
 /* esysclk
  *
@@ -639,6 +678,29 @@ static struct clk clk_display = {
 	.round_rate	= s3c2443_roundrate_clksrc256,
 };
 
+/* prediv
+ *
+ * this divides the msysclk down to pass to h/p/etc.
+ */
+
+static unsigned long s3c2443_prediv_getrate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+	return rate / (clkdiv0 + 1);
+}
+
+static struct clk clk_prediv = {
+	.name		= "prediv",
+	.id		= -1,
+	.parent		= &clk_msysclk,
+	.get_rate	= s3c2443_prediv_getrate,
+};
+
 /* standard clock definitions */
 
 static struct clk init_clocks_disable[] = {
@@ -887,6 +949,15 @@ static void __init s3c2443_clk_initparents(void)
 	}
 
 	clk_init_set_parent(&clk_msysclk, parent);
+
+	/* arm */
+
+	if (__raw_readl(S3C2443_CLKDIV0) & S3C2443_CLKDIV0_DVS)
+		parent = &clk_h;
+	else
+		parent = &clk_armdiv;
+
+	clk_init_set_parent(&clk_arm, parent);
 }
 
 /* armdiv divisor table */
@@ -909,10 +980,9 @@ static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
 	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
 }
 
-static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0)
+static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
 {
-	clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
 
 	return clkcon0 + 1;
 }
@@ -936,6 +1006,9 @@ static struct clk *clks[] __initdata = {
 	&clk_hsspi,
 	&clk_hsmmc_div,
 	&clk_hsmmc,
+	&clk_armdiv,
+	&clk_arm,
+	&clk_prediv,
 };
 
 void __init s3c2443_init_clocks(int xtal)
@@ -951,10 +1024,16 @@ void __init s3c2443_init_clocks(int xtal)
 	int ret;
 	int ptr;
 
+	/* s3c2443 parents h and p clocks from prediv */
+	clk_h.parent = &clk_prediv;
+	clk_p.parent = &clk_prediv;
+
 	pll = s3c2443_get_mpll(mpllcon, xtal);
+	clk_msysclk.rate = pll;
 
 	fclk = pll / s3c2443_fclk_div(clkdiv0);
-	hclk = fclk / s3c2443_get_prediv(clkdiv0);
+	hclk = s3c2443_prediv_getrate(&clk_prediv);
+	hclk = hclk / s3c2443_get_hdiv(clkdiv0);
 	hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
  	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
 
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index fc97fe57ee6f..b5809c51d13f 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -103,7 +103,7 @@ static void clk_gpio27_disable(void)
 }
 
 static struct clk clk_gpio27 = {
-	.name		= "GPIO27_CLK",
+	.name		= "SA1111_CLK",
 	.rate		= 3686400,
 	.enable		= clk_gpio27_enable,
 	.disable	= clk_gpio27_disable,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 33ed048502a3..3a6c8ec34cd9 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -180,8 +180,21 @@ config CPU_ARM925T
 # ARM926T
 config CPU_ARM926T
 	bool "Support ARM926T processor"
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
-	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \
+		MACH_VERSATILE_AB || ARCH_OMAP730 || \
+		ARCH_OMAP16XX || MACH_REALVIEW_EB || \
+		ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
+		ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
+		ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
+		ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
+		ARCH_NS9XXX || ARCH_DAVINCI
+	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
+		ARCH_OMAP730 || ARCH_OMAP16XX || \
+		ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
+		ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
+		ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
+		ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
+		ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_PABRT_NOIFAR
@@ -365,7 +378,7 @@ config CPU_XSC3
 # Feroceon
 config CPU_FEROCEON
 	bool
-	depends on ARCH_ORION5X
+	depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD || ARCH_MV78XX0
 	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T
@@ -373,7 +386,7 @@ config CPU_FEROCEON
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_FEROCEON if MMU
-	select CPU_TLB_V4WBI if MMU
+	select CPU_TLB_FEROCEON if MMU
 
 config CPU_FEROCEON_OLD_ID
 	bool "Accept early Feroceon cores with an ARM926 ID"
@@ -551,6 +564,11 @@ config CPU_TLB_V4WBI
 	  ARM Architecture Version 4 TLB with writeback cache and invalidate
 	  instruction cache entry.
 
+config CPU_TLB_FEROCEON
+	bool
+	help
+	  Feroceon TLB (v4wbi with non-outer-cachable page table walks).
+
 config CPU_TLB_V6
 	bool
 
@@ -709,6 +727,14 @@ config OUTER_CACHE
 	bool
 	default n
 
+config CACHE_FEROCEON_L2
+	bool "Enable the Feroceon L2 cache controller"
+	depends on ARCH_KIRKWOOD || ARCH_MV78XX0
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the Feroceon L2 cache controller.
+
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 32b2d2d213a6..2e27a8c8372b 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_CPU_TLB_V3)	+= tlb-v3.o
 obj-$(CONFIG_CPU_TLB_V4WT)	+= tlb-v4.o
 obj-$(CONFIG_CPU_TLB_V4WB)	+= tlb-v4wb.o
 obj-$(CONFIG_CPU_TLB_V4WBI)	+= tlb-v4wbi.o
+obj-$(CONFIG_CPU_TLB_FEROCEON)	+= tlb-v4wbi.o	# reuse v4wbi TLB functions
 obj-$(CONFIG_CPU_TLB_V6)	+= tlb-v6.o
 obj-$(CONFIG_CPU_TLB_V7)	+= tlb-v7.o
 
@@ -73,4 +74,7 @@ obj-$(CONFIG_CPU_FEROCEON)	+= proc-feroceon.o
 obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 
+obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
+obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
+
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
new file mode 100644
index 000000000000..20eec4ba173f
--- /dev/null
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -0,0 +1,318 @@
+/*
+ * arch/arm/mm/cache-feroceon-l2.c - Feroceon L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - Unified Layer 2 Cache for Feroceon CPU Cores,
+ *   Document ID MV-S104858-00, Rev. A, October 23 2007.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+
+
+/*
+ * Low-level cache maintenance operations.
+ *
+ * As well as the regular 'clean/invalidate/flush L2 cache line by
+ * MVA' instructions, the Feroceon L2 cache controller also features
+ * 'clean/invalidate L2 range by MVA' operations.
+ *
+ * Cache range operations are initiated by writing the start and
+ * end addresses to successive cp15 registers, and process every
+ * cache line whose first byte address lies in the inclusive range
+ * [start:end].
+ *
+ * The cache range operations stall the CPU pipeline until completion.
+ *
+ * The range operations require two successive cp15 writes, in
+ * between which we don't want to be preempted.
+ */
+static inline void l2_clean_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
+}
+
+static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
+{
+	unsigned long flags;
+
+	/*
+	 * Make sure 'start' and 'end' reference the same page, as
+	 * L2 is PIPT and range operations only do a TLB lookup on
+	 * the start address.
+	 */
+	BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+
+	raw_local_irq_save(flags);
+	__asm__("mcr p15, 1, %0, c15, c9, 4" : : "r" (start));
+	__asm__("mcr p15, 1, %0, c15, c9, 5" : : "r" (end));
+	raw_local_irq_restore(flags);
+}
+
+static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
+{
+	l2_clean_mva_range(__phys_to_virt(start), __phys_to_virt(end));
+}
+
+static inline void l2_clean_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr));
+}
+
+static inline void l2_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr));
+}
+
+static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
+{
+	unsigned long flags;
+
+	/*
+	 * Make sure 'start' and 'end' reference the same page, as
+	 * L2 is PIPT and range operations only do a TLB lookup on
+	 * the start address.
+	 */
+	BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+
+	raw_local_irq_save(flags);
+	__asm__("mcr p15, 1, %0, c15, c11, 4" : : "r" (start));
+	__asm__("mcr p15, 1, %0, c15, c11, 5" : : "r" (end));
+	raw_local_irq_restore(flags);
+}
+
+static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
+{
+	l2_inv_mva_range(__phys_to_virt(start), __phys_to_virt(end));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive, while the hardware cache range operations use
+ * inclusive start and end addresses.
+ */
+#define CACHE_LINE_SIZE		32
+#define MAX_RANGE_SIZE		1024
+
+static int l2_wt_override;
+
+static unsigned long calc_range_end(unsigned long start, unsigned long end)
+{
+	unsigned long range_end;
+
+	BUG_ON(start & (CACHE_LINE_SIZE - 1));
+	BUG_ON(end & (CACHE_LINE_SIZE - 1));
+
+	/*
+	 * Try to process all cache lines between 'start' and 'end'.
+	 */
+	range_end = end;
+
+	/*
+	 * Limit the number of cache lines processed at once,
+	 * since cache range operations stall the CPU pipeline
+	 * until completion.
+	 */
+	if (range_end > start + MAX_RANGE_SIZE)
+		range_end = start + MAX_RANGE_SIZE;
+
+	/*
+	 * Cache range operations can't straddle a page boundary.
+	 */
+	if (range_end > (start | (PAGE_SIZE - 1)) + 1)
+		range_end = (start | (PAGE_SIZE - 1)) + 1;
+
+	return range_end;
+}
+
+static void feroceon_l2_inv_range(unsigned long start, unsigned long end)
+{
+	/*
+	 * Clean and invalidate partial first cache line.
+	 */
+	if (start & (CACHE_LINE_SIZE - 1)) {
+		l2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+	}
+
+	/*
+	 * Clean and invalidate partial last cache line.
+	 */
+	if (end & (CACHE_LINE_SIZE - 1)) {
+		l2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+		end &= ~(CACHE_LINE_SIZE - 1);
+	}
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start != end) {
+		unsigned long range_end = calc_range_end(start, end);
+		l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
+		start = range_end;
+	}
+
+	dsb();
+}
+
+static void feroceon_l2_clean_range(unsigned long start, unsigned long end)
+{
+	/*
+	 * If L2 is forced to WT, the L2 will always be clean and we
+	 * don't need to do anything here.
+	 */
+	if (!l2_wt_override) {
+		start &= ~(CACHE_LINE_SIZE - 1);
+		end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
+		while (start != end) {
+			unsigned long range_end = calc_range_end(start, end);
+			l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
+			start = range_end;
+		}
+	}
+
+	dsb();
+}
+
+static void feroceon_l2_flush_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
+	while (start != end) {
+		unsigned long range_end = calc_range_end(start, end);
+		if (!l2_wt_override)
+			l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
+		l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
+		start = range_end;
+	}
+
+	dsb();
+}
+
+
+/*
+ * Routines to disable and re-enable the D-cache and I-cache at run
+ * time.  These are necessary because the L2 cache can only be enabled
+ * or disabled while the L1 Dcache and Icache are both disabled.
+ */
+static void __init invalidate_and_disable_dcache(void)
+{
+	u32 cr;
+
+	cr = get_cr();
+	if (cr & CR_C) {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		flush_cache_all();
+		set_cr(cr & ~CR_C);
+		raw_local_irq_restore(flags);
+	}
+}
+
+static void __init enable_dcache(void)
+{
+	u32 cr;
+
+	cr = get_cr();
+	if (!(cr & CR_C))
+		set_cr(cr | CR_C);
+}
+
+static void __init __invalidate_icache(void)
+{
+	int dummy;
+
+	__asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0\n" : "=r" (dummy));
+}
+
+static void __init invalidate_and_disable_icache(void)
+{
+	u32 cr;
+
+	cr = get_cr();
+	if (cr & CR_I) {
+		set_cr(cr & ~CR_I);
+		__invalidate_icache();
+	}
+}
+
+static void __init enable_icache(void)
+{
+	u32 cr;
+
+	cr = get_cr();
+	if (!(cr & CR_I))
+		set_cr(cr | CR_I);
+}
+
+static inline u32 read_extra_features(void)
+{
+	u32 u;
+
+	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+	return u;
+}
+
+static inline void write_extra_features(u32 u)
+{
+	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+	u32 u;
+
+	/*
+	 * Read the CPU Extra Features register and verify that the
+	 * Disable L2 Prefetch bit is set.
+	 */
+	u = read_extra_features();
+	if (!(u & 0x01000000)) {
+		printk(KERN_INFO "Feroceon L2: Disabling L2 prefetch.\n");
+		write_extra_features(u | 0x01000000);
+	}
+}
+
+static void __init enable_l2(void)
+{
+	u32 u;
+
+	u = read_extra_features();
+	if (!(u & 0x00400000)) {
+		printk(KERN_INFO "Feroceon L2: Enabling L2\n");
+
+		invalidate_and_disable_dcache();
+		invalidate_and_disable_icache();
+		write_extra_features(u | 0x00400000);
+		enable_icache();
+		enable_dcache();
+	}
+}
+
+void __init feroceon_l2_init(int __l2_wt_override)
+{
+	l2_wt_override = __l2_wt_override;
+
+	disable_l2_prefetch();
+
+	outer_cache.inv_range = feroceon_l2_inv_range;
+	outer_cache.clean_range = feroceon_l2_clean_range;
+	outer_cache.flush_range = feroceon_l2_flush_range;
+
+	enable_l2();
+
+	printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
+			 l2_wt_override ? ", in WT override mode" : "");
+}
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
index 1e5602189507..c8c0c4b0f0a3 100644
--- a/arch/arm/mm/discontig.c
+++ b/arch/arm/mm/discontig.c
@@ -21,26 +21,24 @@
  * Our node_data structure for discontiguous memory.
  */
 
-static bootmem_data_t node_bootmem_data[MAX_NUMNODES];
-
 pg_data_t discontig_node_data[MAX_NUMNODES] = {
-  { .bdata = &node_bootmem_data[0] },
-  { .bdata = &node_bootmem_data[1] },
-  { .bdata = &node_bootmem_data[2] },
-  { .bdata = &node_bootmem_data[3] },
+  { .bdata = &bootmem_node_data[0] },
+  { .bdata = &bootmem_node_data[1] },
+  { .bdata = &bootmem_node_data[2] },
+  { .bdata = &bootmem_node_data[3] },
 #if MAX_NUMNODES == 16
-  { .bdata = &node_bootmem_data[4] },
-  { .bdata = &node_bootmem_data[5] },
-  { .bdata = &node_bootmem_data[6] },
-  { .bdata = &node_bootmem_data[7] },
-  { .bdata = &node_bootmem_data[8] },
-  { .bdata = &node_bootmem_data[9] },
-  { .bdata = &node_bootmem_data[10] },
-  { .bdata = &node_bootmem_data[11] },
-  { .bdata = &node_bootmem_data[12] },
-  { .bdata = &node_bootmem_data[13] },
-  { .bdata = &node_bootmem_data[14] },
-  { .bdata = &node_bootmem_data[15] },
+  { .bdata = &bootmem_node_data[4] },
+  { .bdata = &bootmem_node_data[5] },
+  { .bdata = &bootmem_node_data[6] },
+  { .bdata = &bootmem_node_data[7] },
+  { .bdata = &bootmem_node_data[8] },
+  { .bdata = &bootmem_node_data[9] },
+  { .bdata = &bootmem_node_data[10] },
+  { .bdata = &bootmem_node_data[11] },
+  { .bdata = &bootmem_node_data[12] },
+  { .bdata = &bootmem_node_data[13] },
+  { .bdata = &bootmem_node_data[14] },
+  { .bdata = &bootmem_node_data[15] },
 #endif
 };
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 44558d5f9313..fbfa26058442 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -144,13 +144,17 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 	page = pfn_to_page(pfn);
 	mapping = page_mapping(page);
 	if (mapping) {
+#ifndef CONFIG_SMP
 		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
 
 		if (dirty)
 			__flush_dcache_page(mapping, page);
+#endif
 
 		if (cache_is_vivt())
 			make_coherent(mapping, vma, addr, pfn);
+		else if (vma->vm_flags & VM_EXEC)
+			__flush_icache_all();
 	}
 }
 
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 9df507d36e0b..029ee65fda2b 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -199,6 +199,8 @@ void flush_dcache_page(struct page *page)
 		__flush_dcache_page(mapping, page);
 		if (mapping && cache_is_vivt())
 			__flush_dcache_aliases(mapping, page);
+		else if (mapping)
+			__flush_icache_all();
 	}
 }
 EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index b657f1719af0..e6352946dde0 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -284,7 +284,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	 */
 	arch_adjust_zones(node, zone_size, zhole_size);
 
-	free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+	free_area_init_node(node, zone_size, start_pfn, zhole_size);
 
 	return end_pfn;
 }
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index a02c1712b52d..f2e5884c513a 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -44,11 +44,31 @@
  */
 #define CACHE_DLINESIZE	32
 
+	.bss
+	.align 3
+__cache_params_loc:
+	.space	8
+
 	.text
+__cache_params:
+	.word	__cache_params_loc
+
 /*
  * cpu_feroceon_proc_init()
  */
 ENTRY(cpu_feroceon_proc_init)
+	mrc	p15, 0, r0, c0, c0, 1		@ read cache type register
+	ldr	r1, __cache_params
+	mov	r2, #(16 << 5)
+	tst	r0, #(1 << 16)			@ get way
+	mov	r0, r0, lsr #18			@ get cache size order
+	movne	r3, #((4 - 1) << 30)		@ 4-way
+	and	r0, r0, #0xf
+	moveq	r3, #0				@ 1-way
+	mov	r2, r2, lsl r0			@ actual cache size
+	movne	r2, r2, lsr #2			@ turned into # of sets
+	sub	r2, r2, #(1 << 5)
+	stmia	r1, {r2, r3}
 	mov	pc, lr
 
 /*
@@ -59,6 +79,13 @@ ENTRY(cpu_feroceon_proc_fin)
 	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
 	msr	cpsr_c, ip
 	bl	feroceon_flush_kern_cache_all
+
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+	mov	r0, #0
+	mcr	p15, 1, r0, c15, c9, 0		@ clean L2
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+#endif
+
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
@@ -117,11 +144,19 @@ ENTRY(feroceon_flush_user_cache_all)
  */
 ENTRY(feroceon_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
-	mov	ip, #0
+
 __flush_whole_cache:
-1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
-	bne	1b
+	ldr	r1, __cache_params
+	ldmia	r1, {r1, r3}
+1:	orr	ip, r1, r3
+2:	mcr	p15, 0, ip, c7, c14, 2		@ clean + invalidate D set/way
+	subs	ip, ip, #(1 << 30)		@ next way
+	bcs	2b
+	subs	r1, r1, #(1 << 5)		@ next set
+	bcs	1b
+
 	tst	r2, #VM_EXEC
+	mov	ip, #0
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	pc, lr
@@ -138,7 +173,6 @@ __flush_whole_cache:
  */
 	.align	5
 ENTRY(feroceon_flush_user_cache_range)
-	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
 	bgt	__flush_whole_cache
@@ -152,6 +186,7 @@ ENTRY(feroceon_flush_user_cache_range)
 	cmp	r0, r1
 	blo	1b
 	tst	r2, #VM_EXEC
+	mov	ip, #0
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
@@ -209,6 +244,20 @@ ENTRY(feroceon_flush_kern_dcache_page)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+	.align	5
+ENTRY(feroceon_range_flush_kern_dcache_page)
+	mrs	r2, cpsr
+	add	r1, r0, #PAGE_SZ - CACHE_DLINESIZE	@ top addr is inclusive
+	orr	r3, r2, #PSR_I_BIT
+	msr	cpsr_c, r3			@ disable interrupts
+	mcr	p15, 5, r0, c15, c15, 0		@ D clean/inv range start
+	mcr	p15, 5, r1, c15, c15, 1		@ D clean/inv range top
+	msr	cpsr_c, r2			@ restore interrupts
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
 /*
  *	dma_inv_range(start, end)
  *
@@ -225,10 +274,10 @@ ENTRY(feroceon_flush_kern_dcache_page)
 	.align	5
 ENTRY(feroceon_dma_inv_range)
 	tst	r0, #CACHE_DLINESIZE - 1
+	bic	r0, r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
 	tst	r1, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -236,6 +285,22 @@ ENTRY(feroceon_dma_inv_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+	.align	5
+ENTRY(feroceon_range_dma_inv_range)
+	mrs	r2, cpsr
+	tst	r0, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+	cmp	r1, r0
+	subne	r1, r1, #1			@ top address is inclusive
+	orr	r3, r2, #PSR_I_BIT
+	msr	cpsr_c, r3			@ disable interrupts
+	mcr	p15, 5, r0, c15, c14, 0		@ D inv range start
+	mcr	p15, 5, r1, c15, c14, 1		@ D inv range top
+	msr	cpsr_c, r2			@ restore interrupts
+	mov	pc, lr
+
 /*
  *	dma_clean_range(start, end)
  *
@@ -256,6 +321,19 @@ ENTRY(feroceon_dma_clean_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+	.align	5
+ENTRY(feroceon_range_dma_clean_range)
+	mrs	r2, cpsr
+	cmp	r1, r0
+	subne	r1, r1, #1			@ top address is inclusive
+	orr	r3, r2, #PSR_I_BIT
+	msr	cpsr_c, r3			@ disable interrupts
+	mcr	p15, 5, r0, c15, c13, 0		@ D clean range start
+	mcr	p15, 5, r1, c15, c13, 1		@ D clean range top
+	msr	cpsr_c, r2			@ restore interrupts
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
 /*
  *	dma_flush_range(start, end)
  *
@@ -274,6 +352,19 @@ ENTRY(feroceon_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+	.align	5
+ENTRY(feroceon_range_dma_flush_range)
+	mrs	r2, cpsr
+	cmp	r1, r0
+	subne	r1, r1, #1			@ top address is inclusive
+	orr	r3, r2, #PSR_I_BIT
+	msr	cpsr_c, r3			@ disable interrupts
+	mcr	p15, 5, r0, c15, c15, 0		@ D clean/inv range start
+	mcr	p15, 5, r1, c15, c15, 1		@ D clean/inv range top
+	msr	cpsr_c, r2			@ restore interrupts
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
 ENTRY(feroceon_cache_fns)
 	.long	feroceon_flush_kern_cache_all
 	.long	feroceon_flush_user_cache_all
@@ -285,12 +376,33 @@ ENTRY(feroceon_cache_fns)
 	.long	feroceon_dma_clean_range
 	.long	feroceon_dma_flush_range
 
+ENTRY(feroceon_range_cache_fns)
+	.long	feroceon_flush_kern_cache_all
+	.long	feroceon_flush_user_cache_all
+	.long	feroceon_flush_user_cache_range
+	.long	feroceon_coherent_kern_range
+	.long	feroceon_coherent_user_range
+	.long	feroceon_range_flush_kern_dcache_page
+	.long	feroceon_range_dma_inv_range
+	.long	feroceon_range_dma_clean_range
+	.long	feroceon_range_dma_flush_range
+
 	.align	5
 ENTRY(cpu_feroceon_dcache_clean_area)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+	mov	r2, r0
+	mov	r3, r1
+#endif
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	subs	r1, r1, #CACHE_DLINESIZE
 	bhi	1b
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+1:	mcr	p15, 1, r2, c15, c9, 1		@ clean L2 entry
+	add	r2, r2, #CACHE_DLINESIZE
+	subs	r3, r3, #CACHE_DLINESIZE
+	bhi	1b
+#endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
@@ -306,16 +418,25 @@ ENTRY(cpu_feroceon_dcache_clean_area)
 	.align	5
 ENTRY(cpu_feroceon_switch_mm)
 #ifdef CONFIG_MMU
-	mov	ip, #0
-@ && 'Clean & Invalidate whole DCache'
-1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
-	bne	1b
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	/*
+	 * Note: we wish to call __flush_whole_cache but we need to preserve
+	 * lr to do so.  The only way without touching main memory is to
+	 * use r2 which is normally used to test the VM_EXEC flag, and
+	 * compensate locally for the skipped ops if it is not set.
+	 */
+	mov	r2, lr				@ abuse r2 to preserve lr
+	bl	__flush_whole_cache
+	@ if r2 contains the VM_EXEC bit then the next 2 ops are done already
+	tst	r2, #VM_EXEC
+	mcreq	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcreq	p15, 0, ip, c7, c10, 4		@ drain WB
+
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
+	mov	pc, r2
+#else
 	mov	pc, lr
+#endif
 
 /*
  * cpu_feroceon_set_pte_ext(ptep, pte, ext)
@@ -345,6 +466,9 @@ ENTRY(cpu_feroceon_set_pte_ext)
 	str	r2, [r0]			@ hardware version
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+	mcr	p15, 1, r0, c15, c9, 1		@ clean L2 entry
+#endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif
 	mov	pc, lr
@@ -369,14 +493,15 @@ __feroceon_setup:
 	.size	__feroceon_setup, . - __feroceon_setup
 
 	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .011 0001 ..11 0101
+	 *      B
+	 *  R   P
+	 * .RVI UFRS BLDP WCAM
+	 * .011 .001 ..11 0101
 	 *
 	 */
 	.type	feroceon_crval, #object
 feroceon_crval:
-	crval	clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
+	crval	clear=0x0000773f, mmuset=0x00003135, ucset=0x00001134
 
 	__INITDATA
 
@@ -414,6 +539,21 @@ cpu_feroceon_name:
 	.asciz	"Feroceon"
 	.size	cpu_feroceon_name, . - cpu_feroceon_name
 
+	.type	cpu_88fr531_name, #object
+cpu_88fr531_name:
+	.asciz	"Feroceon 88FR531-vd"
+	.size	cpu_88fr531_name, . - cpu_88fr531_name
+
+	.type	cpu_88fr571_name, #object
+cpu_88fr571_name:
+	.asciz	"Feroceon 88FR571-vd"
+	.size	cpu_88fr571_name, . - cpu_88fr571_name
+
+	.type	cpu_88fr131_name, #object
+cpu_88fr131_name:
+	.asciz	"Feroceon 88FR131"
+	.size	cpu_88fr131_name, . - cpu_88fr131_name
+
 	.align
 
 	.section ".proc.info.init", #alloc, #execinstr
@@ -421,15 +561,15 @@ cpu_feroceon_name:
 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
 	.type	__feroceon_old_id_proc_info,#object
 __feroceon_old_id_proc_info:
-	.long	0x41069260
-	.long	0xfffffff0
-	.long   PMD_TYPE_SECT | \
+	.long	0x41009260
+	.long	0xff00fff0
+	.long	PMD_TYPE_SECT | \
 		PMD_SECT_BUFFERABLE | \
 		PMD_SECT_CACHEABLE | \
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
+	.long	PMD_TYPE_SECT | \
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
@@ -445,17 +585,17 @@ __feroceon_old_id_proc_info:
 	.size	__feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info
 #endif
 
-	.type	__feroceon_proc_info,#object
-__feroceon_proc_info:
+	.type	__88fr531_proc_info,#object
+__88fr531_proc_info:
 	.long	0x56055310
 	.long	0xfffffff0
-	.long   PMD_TYPE_SECT | \
+	.long	PMD_TYPE_SECT | \
 		PMD_SECT_BUFFERABLE | \
 		PMD_SECT_CACHEABLE | \
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
+	.long	PMD_TYPE_SECT | \
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
@@ -463,9 +603,59 @@ __feroceon_proc_info:
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
-	.long	cpu_feroceon_name
+	.long	cpu_88fr531_name
 	.long	feroceon_processor_functions
 	.long	v4wbi_tlb_fns
 	.long	feroceon_user_fns
 	.long	feroceon_cache_fns
-	.size	__feroceon_proc_info, . - __feroceon_proc_info
+	.size	__88fr531_proc_info, . - __88fr531_proc_info
+
+	.type	__88fr571_proc_info,#object
+__88fr571_proc_info:
+	.long	0x56155710
+	.long	0xfffffff0
+	.long	PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long	PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__feroceon_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_88fr571_name
+	.long	feroceon_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	feroceon_user_fns
+	.long	feroceon_range_cache_fns
+	.size	__88fr571_proc_info, . - __88fr571_proc_info
+
+	.type	__88fr131_proc_info,#object
+__88fr131_proc_info:
+	.long	0x56251310
+	.long	0xfffffff0
+	.long	PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long	PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__feroceon_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_88fr131_name
+	.long	feroceon_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	feroceon_user_fns
+	.long	feroceon_range_cache_fns
+	.size	__88fr131_proc_info, . - __88fr131_proc_info
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 74fae6045650..4458705021e0 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -201,7 +201,7 @@ static int em_call_function(int (*fn)(void))
 	data.ret = 0;
 
 	preempt_disable();
-	smp_call_function(em_func, &data, 1, 1);
+	smp_call_function(em_func, &data, 1);
 	em_func(&data);
 	preempt_enable();
 
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
index eda436083417..640e498c12ef 100644
--- a/arch/arm/plat-iop/gpio.c
+++ b/arch/arm/plat-iop/gpio.c
@@ -11,6 +11,10 @@
  */
 
 #include <linux/device.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
 #include <asm/hardware/iop3xx.h>
 
 void gpio_line_config(int line, int direction)
@@ -46,3 +50,42 @@ void gpio_line_set(int line, int value)
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL(gpio_line_set);
+
+static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	gpio_line_config(gpio, GPIO_IN);
+	return 0;
+}
+
+static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
+{
+	gpio_line_set(gpio, level);
+	gpio_line_config(gpio, GPIO_OUT);
+	return 0;
+}
+
+static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio_line_get(gpio);
+}
+
+static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	gpio_line_set(gpio, value);
+}
+
+static struct gpio_chip iop3xx_chip = {
+	.label			= "iop3xx",
+	.direction_input	= iop3xx_gpio_direction_input,
+	.get			= iop3xx_gpio_get_value,
+	.direction_output	= iop3xx_gpio_direction_output,
+	.set			= iop3xx_gpio_set_value,
+	.base			= 0,
+	.ngpio			= IOP3XX_N_GPIOS,
+};
+
+static int __init iop3xx_gpio_setup(void)
+{
+	return gpiochip_add(&iop3xx_chip);
+}
+arch_initcall(iop3xx_gpio_setup);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index bb6e12738fb3..e14eaad11dd5 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -3,9 +3,14 @@ if ARCH_MXC
 menu "Freescale MXC Implementations"
 
 choice
-	prompt "MXC/iMX System Type"
+	prompt "MXC/iMX Base Type"
 	default ARCH_MX3
 
+config ARCH_MX2
+	bool "MX2-based"
+	help
+	  This enables support for systems based on the Freescale i.MX2 family
+
 config ARCH_MX3
 	bool "MX3-based"
 	help
@@ -13,6 +18,7 @@ config ARCH_MX3
 
 endchoice
 
+source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 
 endmenu
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index f96dc0362068..db66e9ae8414 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,4 +3,6 @@
 #
 
 # Common support
-obj-y := irq.o
+obj-y := irq.o clock.o gpio.o time.o
+
+obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
new file mode 100644
index 000000000000..1aa86fd60d71
--- /dev/null
+++ b/arch/arm/plat-mxc/clock.c
@@ -0,0 +1,331 @@
+/*
+ * Based on arch/arm/plat-omap/clock.c
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+/* #define DEBUG */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+#include <linux/semaphore.h>
+#include <linux/string.h>
+#include <linux/version.h>
+
+#include <asm/arch/clock.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in include/linux/clk.h
+ *-------------------------------------------------------------------------*/
+
+/*
+ * Retrieve a clock by name.
+ *
+ * Note that we first try to use device id on the bus
+ * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
+ * we try to use clock name only.
+ * The reference count to the clock's module owner ref count is incremented.
+ */
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+	int idno;
+	const char *str;
+
+	if (id == NULL)
+		return clk;
+
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(p, &clocks, node) {
+		if (p->id == idno &&
+		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+			clk = p;
+			goto found;
+		}
+	}
+
+	str = strrchr(id, '.');
+	if (str) {
+		int cnt = str - id;
+		str++;
+		idno = simple_strtol(str, NULL, 10);
+		list_for_each_entry(p, &clocks, node) {
+			if (p->id == idno &&
+			    strlen(p->name) == cnt &&
+			    strncmp(id, p->name, cnt) == 0 &&
+			    try_module_get(p->owner)) {
+				clk = p;
+				goto found;
+			}
+		}
+	}
+
+	list_for_each_entry(p, &clocks, node) {
+		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+			clk = p;
+			goto found;
+		}
+	}
+
+	printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
+
+found:
+	mutex_unlock(&clocks_mutex);
+
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+static void __clk_disable(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	__clk_disable(clk->parent);
+	__clk_disable(clk->secondary);
+
+	if (!(--clk->usecount) && clk->disable)
+		clk->disable(clk);
+}
+
+static int __clk_enable(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	__clk_enable(clk->parent);
+	__clk_enable(clk->secondary);
+
+	if (clk->usecount++ == 0 && clk->enable)
+		clk->enable(clk);
+
+	return 0;
+}
+
+/* This function increments the reference count on the clock and enables the
+ * clock if not already enabled. The parent clock tree is recursively enabled
+ */
+int clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	ret = __clk_enable(clk);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* This function decrements the reference count on the clock and disables
+ * the clock when reference count is 0. The parent clock tree is
+ * recursively disabled
+ */
+void clk_disable(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	mutex_lock(&clocks_mutex);
+	__clk_disable(clk);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Retrieve the *current* clock rate. If the clock itself
+ * does not provide a special calculation routine, ask
+ * its parent and so on, until one is able to return
+ * a valid clock rate
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return 0UL;
+
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
+	return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* Decrement the clock's module reference count */
+void clk_put(struct clk *clk)
+{
+	if (clk && !IS_ERR(clk))
+		module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+/* Round the requested clock rate to the nearest supported
+ * rate that is less than or equal to the requested rate.
+ * This is dependent on the clock's current parent.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
+		return 0;
+
+	return clk->round_rate(clk, rate);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/* Set the clock to the requested clock rate. The rate must
+ * match a supported rate exactly based on what clk_round_rate returns
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
+		return ret;
+
+	mutex_lock(&clocks_mutex);
+	ret = clk->set_rate(clk, rate);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* Set the clock's parent to another clock source */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -EINVAL;
+
+	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
+	    IS_ERR(parent) || clk->set_parent == NULL)
+		return ret;
+
+	mutex_lock(&clocks_mutex);
+	ret = clk->set_parent(clk, parent);
+	if (ret == 0)
+		clk->parent = parent;
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* Retrieve the clock's parent clock source */
+struct clk *clk_get_parent(struct clk *clk)
+{
+	struct clk *ret = NULL;
+
+	if (clk == NULL || IS_ERR(clk))
+		return ret;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * Add a new clock to the clock tree.
+ */
+int clk_register(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	list_add(&clk->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+/* Remove a clock from the clock tree */
+void clk_unregister(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	mutex_lock(&clocks_mutex);
+	list_del(&clk->node);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+#ifdef CONFIG_PROC_FS
+static int mxc_clock_read_proc(char *page, char **start, off_t off,
+				int count, int *eof, void *data)
+{
+	struct clk *clkp;
+	char *p = page;
+	int len;
+
+	list_for_each_entry(clkp, &clocks, node) {
+		p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
+				clk_get_rate(clkp), clkp->usecount);
+		if (clkp->parent)
+			p += sprintf(p, ", %s-%d\n", clkp->parent->name,
+				     clkp->parent->id);
+		else
+			p += sprintf(p, "\n");
+	}
+
+	len = (p - page) - off;
+	if (len < 0)
+		len = 0;
+
+	*eof = (len <= count) ? 1 : 0;
+	*start = page + off;
+
+	return len;
+}
+
+static int __init mxc_setup_proc_entry(void)
+{
+	struct proc_dir_entry *res;
+
+	res = create_proc_read_entry("cpu/clocks", 0, NULL,
+				     mxc_clock_read_proc, NULL);
+	if (!res) {
+		printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+late_initcall(mxc_setup_proc_entry);
+#endif
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
new file mode 100644
index 000000000000..4a7736717d86
--- /dev/null
+++ b/arch/arm/plat-mxc/gpio.c
@@ -0,0 +1,253 @@
+/*
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * Based on code from Freescale,
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/hardware.h>
+#include <asm-generic/bug.h>
+
+static struct mxc_gpio_port *mxc_gpio_ports;
+static int gpio_table_size;
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
+{
+	__raw_writel(1 << index, port->base + GPIO_ISR);
+}
+
+static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
+				int enable)
+{
+	u32 l;
+
+	l = __raw_readl(port->base + GPIO_IMR);
+	l = (l & (~(1 << index))) | (!!enable << index);
+	__raw_writel(l, port->base + GPIO_IMR);
+}
+
+static void gpio_ack_irq(u32 irq)
+{
+	u32 gpio = irq_to_gpio(irq);
+	_clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
+}
+
+static void gpio_mask_irq(u32 irq)
+{
+	u32 gpio = irq_to_gpio(irq);
+	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
+}
+
+static void gpio_unmask_irq(u32 irq)
+{
+	u32 gpio = irq_to_gpio(irq);
+	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
+}
+
+static int gpio_set_irq_type(u32 irq, u32 type)
+{
+	u32 gpio = irq_to_gpio(irq);
+	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+	u32 bit, val;
+	int edge;
+	void __iomem *reg = port->base;
+
+	switch (type) {
+	case IRQT_RISING:
+		edge = GPIO_INT_RISE_EDGE;
+		break;
+	case IRQT_FALLING:
+		edge = GPIO_INT_FALL_EDGE;
+		break;
+	case IRQT_LOW:
+		edge = GPIO_INT_LOW_LEV;
+		break;
+	case IRQT_HIGH:
+		edge = GPIO_INT_HIGH_LEV;
+		break;
+	default:	/* this includes IRQT_BOTHEDGE */
+		return -EINVAL;
+	}
+
+	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+	bit = gpio & 0xf;
+	val = __raw_readl(reg) & ~(0x3 << (bit << 1));
+	__raw_writel(val | (edge << (bit << 1)), reg);
+	_clear_gpio_irqstatus(port, gpio & 0x1f);
+
+	return 0;
+}
+
+/* handle n interrupts in one status register */
+static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
+{
+	u32 gpio_irq_no;
+
+	gpio_irq_no = port->virtual_irq_start;
+	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+
+		if ((irq_stat & 1) == 0)
+			continue;
+
+		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
+				&irq_desc[gpio_irq_no]);
+	}
+}
+
+#ifdef CONFIG_ARCH_MX3
+/* MX3 has one interrupt *per* gpio port */
+static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	u32 irq_stat;
+	struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+
+	irq_stat = __raw_readl(port->base + GPIO_ISR) &
+			__raw_readl(port->base + GPIO_IMR);
+	BUG_ON(!irq_stat);
+	mxc_gpio_irq_handler(port, irq_stat);
+}
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+/* MX2 has one interrupt *for all* gpio ports */
+static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	int i;
+	u32 irq_msk, irq_stat;
+	struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+
+	/* walk through all interrupt status registers */
+	for (i = 0; i < gpio_table_size; i++) {
+		irq_msk = __raw_readl(port[i].base + GPIO_IMR);
+		if (!irq_msk)
+			continue;
+
+		irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
+		if (irq_stat)
+			mxc_gpio_irq_handler(&port[i], irq_stat);
+	}
+}
+#endif
+
+static struct irq_chip gpio_irq_chip = {
+	.ack = gpio_ack_irq,
+	.mask = gpio_mask_irq,
+	.unmask = gpio_unmask_irq,
+	.set_type = gpio_set_irq_type,
+};
+
+static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+				int dir)
+{
+	struct mxc_gpio_port *port =
+		container_of(chip, struct mxc_gpio_port, chip);
+	u32 l;
+
+	l = __raw_readl(port->base + GPIO_GDIR);
+	if (dir)
+		l |= 1 << offset;
+	else
+		l &= ~(1 << offset);
+	__raw_writel(l, port->base + GPIO_GDIR);
+}
+
+static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct mxc_gpio_port *port =
+		container_of(chip, struct mxc_gpio_port, chip);
+	void __iomem *reg = port->base + GPIO_DR;
+	u32 l;
+
+	l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
+	__raw_writel(l, reg);
+}
+
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct mxc_gpio_port *port =
+		container_of(chip, struct mxc_gpio_port, chip);
+
+	return (__raw_readl(port->base + GPIO_DR) >> offset) & 1;
+}
+
+static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	_set_gpio_direction(chip, offset, 0);
+	return 0;
+}
+
+static int mxc_gpio_direction_output(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	_set_gpio_direction(chip, offset, 1);
+	mxc_gpio_set(chip, offset, value);
+	return 0;
+}
+
+int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
+{
+	int i, j;
+
+	/* save for local usage */
+	mxc_gpio_ports = port;
+	gpio_table_size = cnt;
+
+	printk(KERN_INFO "MXC GPIO hardware\n");
+
+	for (i = 0; i < cnt; i++) {
+		/* disable the interrupt and clear the status */
+		__raw_writel(0, port[i].base + GPIO_IMR);
+		__raw_writel(~0, port[i].base + GPIO_ISR);
+		for (j = port[i].virtual_irq_start;
+			j < port[i].virtual_irq_start + 32; j++) {
+			set_irq_chip(j, &gpio_irq_chip);
+			set_irq_handler(j, handle_edge_irq);
+			set_irq_flags(j, IRQF_VALID);
+		}
+
+		/* register gpio chip */
+		port[i].chip.direction_input = mxc_gpio_direction_input;
+		port[i].chip.direction_output = mxc_gpio_direction_output;
+		port[i].chip.get = mxc_gpio_get;
+		port[i].chip.set = mxc_gpio_set;
+		port[i].chip.base = i * 32;
+		port[i].chip.ngpio = 32;
+
+		/* its a serious configuration bug when it fails */
+		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
+
+#ifdef CONFIG_ARCH_MX3
+		/* setup one handler for each entry */
+		set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+		set_irq_data(port[i].irq, &port[i]);
+#endif
+	}
+
+#ifdef CONFIG_ARCH_MX2
+	/* setup one handler for all GPIO interrupts */
+	set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+	set_irq_data(port[0].irq, port);
+#endif
+	return 0;
+}
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
new file mode 100644
index 000000000000..1985571eb40c
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -0,0 +1,156 @@
+/*
+ *  arch/arm/mach-mxc/generic.c
+ *
+ *  author: Sascha Hauer
+ *  Created: april 20th, 2004
+ *  Copyright: Synertronixx GmbH
+ *
+ *  Common code for i.MX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware.h>
+#include <asm/mach/map.h>
+#include <asm/arch/iomux-mx1-mx2.h>
+
+void mxc_gpio_mode(int gpio_mode)
+{
+	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+	unsigned int tmp;
+
+	/* Pullup enable */
+	tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port));
+	if (gpio_mode & GPIO_PUEN)
+		tmp |= (1 << pin);
+	else
+		tmp &= ~(1 << pin);
+	__raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port));
+
+	/* Data direction */
+	tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port));
+	if (gpio_mode & GPIO_OUT)
+		tmp |= 1 << pin;
+	else
+		tmp &= ~(1 << pin);
+	__raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port));
+
+	/* Primary / alternate function */
+	tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port));
+	if (gpio_mode & GPIO_AF)
+		tmp |= (1 << pin);
+	else
+		tmp &= ~(1 << pin);
+	__raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port));
+
+	/* use as gpio? */
+	tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port));
+	if (gpio_mode & (GPIO_PF | GPIO_AF))
+		tmp &= ~(1 << pin);
+	else
+		tmp |= (1 << pin);
+	__raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port));
+
+	if (pin < 16) {
+		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port));
+		tmp &= ~(3 << (pin * 2));
+		tmp |= (ocr << (pin * 2));
+		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port));
+
+		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port));
+		tmp &= ~(3 << (pin * 2));
+		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port));
+
+		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port));
+		tmp &= ~(3 << (pin * 2));
+		tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
+		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port));
+	} else {
+		pin -= 16;
+
+		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port));
+		tmp &= ~(3 << (pin * 2));
+		tmp |= (ocr << (pin * 2));
+		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port));
+
+		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port));
+		tmp &= ~(3 << (pin * 2));
+		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port));
+
+		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port));
+		tmp &= ~(3 << (pin * 2));
+		tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
+		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port));
+	}
+}
+EXPORT_SYMBOL(mxc_gpio_mode);
+
+int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+				int alloc_mode, const char *label)
+{
+	const int *p = pin_list;
+	int i;
+	unsigned gpio;
+	unsigned mode;
+
+	for (i = 0; i < count; i++) {
+		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+		mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
+			goto setup_error;
+
+		if (alloc_mode & MXC_GPIO_ALLOC_MODE_RELEASE)
+			gpio_free(gpio);
+		else if (!(alloc_mode & MXC_GPIO_ALLOC_MODE_NO_ALLOC))
+			if (gpio_request(gpio, label)
+			   && !(alloc_mode & MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
+				goto setup_error;
+
+		if (!(alloc_mode & (MXC_GPIO_ALLOC_MODE_ALLOC_ONLY |
+				    MXC_GPIO_ALLOC_MODE_RELEASE)))
+			mxc_gpio_mode(gpio | mode);
+
+		p++;
+	}
+	return 0;
+
+setup_error:
+	if (alloc_mode & (MXC_GPIO_ALLOC_MODE_NO_ALLOC |
+	    MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
+		return -EINVAL;
+
+	while (p != pin_list) {
+		p--;
+		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+		gpio_free(gpio);
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 2ad5a6917b3f..1fbe01da6925 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -1,24 +1,59 @@
 /*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
  */
 
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <asm/hardware.h>
+#include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
 #include <asm/arch/common.h>
 
+#define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
+#define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
+#define AVIC_NIMASK		(AVIC_BASE + 0x04)	/* int mask reg */
+#define AVIC_INTENNUM		(AVIC_BASE + 0x08)	/* int enable number reg */
+#define AVIC_INTDISNUM		(AVIC_BASE + 0x0C)	/* int disable number reg */
+#define AVIC_INTENABLEH		(AVIC_BASE + 0x10)	/* int enable reg high */
+#define AVIC_INTENABLEL		(AVIC_BASE + 0x14)	/* int enable reg low */
+#define AVIC_INTTYPEH		(AVIC_BASE + 0x18)	/* int type reg high */
+#define AVIC_INTTYPEL		(AVIC_BASE + 0x1C)	/* int type reg low */
+#define AVIC_NIPRIORITY7	(AVIC_BASE + 0x20)	/* norm int priority lvl7 */
+#define AVIC_NIPRIORITY6	(AVIC_BASE + 0x24)	/* norm int priority lvl6 */
+#define AVIC_NIPRIORITY5	(AVIC_BASE + 0x28)	/* norm int priority lvl5 */
+#define AVIC_NIPRIORITY4	(AVIC_BASE + 0x2C)	/* norm int priority lvl4 */
+#define AVIC_NIPRIORITY3	(AVIC_BASE + 0x30)	/* norm int priority lvl3 */
+#define AVIC_NIPRIORITY2	(AVIC_BASE + 0x34)	/* norm int priority lvl2 */
+#define AVIC_NIPRIORITY1	(AVIC_BASE + 0x38)	/* norm int priority lvl1 */
+#define AVIC_NIPRIORITY0	(AVIC_BASE + 0x3C)	/* norm int priority lvl0 */
+#define AVIC_NIVECSR		(AVIC_BASE + 0x40)	/* norm int vector/status */
+#define AVIC_FIVECSR		(AVIC_BASE + 0x44)	/* fast int vector/status */
+#define AVIC_INTSRCH		(AVIC_BASE + 0x48)	/* int source reg high */
+#define AVIC_INTSRCL		(AVIC_BASE + 0x4C)	/* int source reg low */
+#define AVIC_INTFRCH		(AVIC_BASE + 0x50)	/* int force reg high */
+#define AVIC_INTFRCL		(AVIC_BASE + 0x54)	/* int force reg low */
+#define AVIC_NIPNDH		(AVIC_BASE + 0x58)	/* norm int pending high */
+#define AVIC_NIPNDL		(AVIC_BASE + 0x5C)	/* norm int pending low */
+#define AVIC_FIPNDH		(AVIC_BASE + 0x60)	/* fast int pending high */
+#define AVIC_FIPNDL		(AVIC_BASE + 0x64)	/* fast int pending low */
+
+#define SYSTEM_PREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x20)
+#define SYSTEM_SREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x24)
+#define IIM_PROD_REV_SH		3
+#define IIM_PROD_REV_LEN	5
+
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
@@ -32,7 +67,7 @@ static void mxc_unmask_irq(unsigned int irq)
 }
 
 static struct irq_chip mxc_avic_chip = {
-	.mask_ack = mxc_mask_irq,
+	.ack = mxc_mask_irq,
 	.mask = mxc_mask_irq,
 	.unmask = mxc_unmask_irq,
 };
@@ -71,5 +106,8 @@ void __init mxc_init_irq(void)
 	reg |= (0xF << 28);
 	__raw_writel(reg, AVIC_NIPRIORITY6);
 
+	/* init architectures chained interrupt handler */
+	mxc_register_gpios();
+
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
new file mode 100644
index 000000000000..3bf86343fdf4
--- /dev/null
+++ b/arch/arm/plat-mxc/time.c
@@ -0,0 +1,228 @@
+/*
+ *  linux/arch/arm/plat-mxc/time.c
+ *
+ *  Copyright (C) 2000-2001 Deep Blue Solutions
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+ *  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/mach/time.h>
+#include <asm/arch/common.h>
+#include <asm/arch/mxc_timer.h>
+
+static struct clock_event_device clockevent_mxc;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+/* clock source for the timer */
+static struct clk *timer_clk;
+
+/* clock source */
+
+static cycle_t mxc_get_cycles(void)
+{
+	return __raw_readl(TIMER_BASE + MXC_TCN);
+}
+
+static struct clocksource clocksource_mxc = {
+	.name 		= "mxc_timer1",
+	.rating		= 200,
+	.read		= mxc_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift 		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init mxc_clocksource_init(void)
+{
+	unsigned int clock;
+
+	clock = clk_get_rate(timer_clk);
+
+	clocksource_mxc.mult = clocksource_hz2mult(clock,
+					clocksource_mxc.shift);
+	clocksource_register(&clocksource_mxc);
+
+	return 0;
+}
+
+/* clock event */
+
+static int mxc_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long tcmp;
+
+	tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
+	__raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+
+	return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+				-ETIME : 0;
+}
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[] = {
+	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
+	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
+};
+#endif /* DEBUG */
+
+static void mxc_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call mxc_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in GPT module */
+	gpt_irq_disable();
+
+	if (mode != clockevent_mode) {
+		/* Set event time into far-far future */
+		__raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
+				TIMER_BASE + MXC_TCMP);
+		/* Clear pending interrupt */
+		gpt_irq_acknowledge();
+	}
+
+#ifdef DEBUG
+	printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
+		clock_event_mode_label[clockevent_mode],
+		clock_event_mode_label[mode]);
+#endif /* DEBUG */
+
+	/* Remember timer mode */
+	clockevent_mode = mode;
+	local_irq_restore(flags);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
+				"supported for i.MX\n");
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	/*
+	 * Do not put overhead of interrupt enable/disable into
+	 * mxc_set_next_event(), the core has about 4 minutes
+	 * to call mxc_set_next_event() or shutdown clock after
+	 * mode switching
+	 */
+		local_irq_save(flags);
+		gpt_irq_enable();
+		local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		/* Left event sources disabled, no more interrupts appear */
+		break;
+	}
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_mxc;
+	uint32_t tstat;
+
+	tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+
+	gpt_irq_acknowledge();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mxc_timer_irq = {
+	.name		= "i.MX Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= mxc_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_mxc = {
+	.name		= "mxc_timer1",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_mode	= mxc_set_mode,
+	.set_next_event	= mxc_set_next_event,
+	.rating		= 200,
+};
+
+static int __init mxc_clockevent_init(void)
+{
+	unsigned int clock;
+
+	clock = clk_get_rate(timer_clk);
+
+	clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
+					clockevent_mxc.shift);
+	clockevent_mxc.max_delta_ns =
+			clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
+	clockevent_mxc.min_delta_ns =
+			clockevent_delta2ns(0xff, &clockevent_mxc);
+
+	clockevent_mxc.cpumask = cpumask_of_cpu(0);
+
+	clockevents_register_device(&clockevent_mxc);
+
+	return 0;
+}
+
+void __init mxc_timer_init(const char *clk_timer)
+{
+	timer_clk = clk_get(NULL, clk_timer);
+	if (!timer_clk) {
+		printk(KERN_ERR"Cannot determine timer clock. Giving up.\n");
+		return;
+	}
+
+	clk_enable(timer_clk);
+
+	/*
+	 * Initialise to a known state (all timers off, and timing reset)
+	 */
+	__raw_writel(0, TIMER_BASE + MXC_TCTL);
+	__raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
+
+	__raw_writel(TCTL_FRR |	/* free running */
+		     TCTL_VAL |	/* set clocksource and arch specific bits */
+		     TCTL_TEN,	/* start the timer */
+		     TIMER_BASE + MXC_TCTL);
+
+	/* init and register the timer to the framework */
+	mxc_clocksource_init();
+	mxc_clockevent_init();
+
+	/* Make irqs happen */
+	setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+}
+
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index bc639a30d6d1..2c4051cc79a1 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o \
+obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
 	 usb.o fb.o
 obj-m :=
 obj-n :=
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 2db5580048d8..c2e741de0203 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/plat-omap/clock.c
  *
- *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Copyright (C) 2004 - 2008 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
  *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
@@ -22,6 +22,7 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/debugfs.h>
 
 #include <asm/io.h>
 
@@ -33,41 +34,6 @@ static DEFINE_SPINLOCK(clockfw_lock);
 
 static struct clk_functions *arch_clock;
 
-#ifdef CONFIG_PM_DEBUG
-
-static void print_parents(struct clk *clk)
-{
-	struct clk *p;
-	int printed = 0;
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->parent == clk && p->usecount) {
-			if (!clk->usecount && !printed) {
-				printk("MISMATCH: %s\n", clk->name);
-				printed = 1;
-			}
-			printk("\t%-15s\n", p->name);
-		}
-	}
-}
-
-void clk_print_usecounts(void)
-{
-	unsigned long flags;
-	struct clk *p;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	list_for_each_entry(p, &clocks, node) {
-		if (p->usecount)
-			printk("%-15s: %d\n", p->name, p->usecount);
-		print_parents(p);
-
-	}
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-
-#endif
-
 /*-------------------------------------------------------------------------
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
@@ -446,3 +412,93 @@ int __init clk_init(struct clk_functions * custom_clocks)
 	return 0;
 }
 
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ *	debugfs support to trace clock tree hierarchy and attributes
+ */
+static struct dentry *clk_debugfs_root;
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+	int err;
+	struct dentry *d, *child;
+	struct clk *pa = c->parent;
+	char s[255];
+	char *p = s;
+
+	p += sprintf(p, "%s", c->name);
+	if (c->id != 0)
+		sprintf(p, ":%d", c->id);
+	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+	c->dent = d;
+
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+	if (IS_ERR(d)) {
+		err = PTR_ERR(d);
+		goto err_out;
+	}
+	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	if (IS_ERR(d)) {
+		err = PTR_ERR(d);
+		goto err_out;
+	}
+	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	if (IS_ERR(d)) {
+		err = PTR_ERR(d);
+		goto err_out;
+	}
+	return 0;
+
+err_out:
+	d = c->dent;
+	list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+		debugfs_remove(child);
+	debugfs_remove(c->dent);
+	return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent;
+
+	if (pa && !pa->dent) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (!c->dent) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+	clk_debugfs_root = d;
+
+	list_for_each_entry(c, &clocks, node) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
+	return 0;
+err_out:
+	debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+	return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index bd1cef2c3c14..8d04929a3c75 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -26,6 +26,7 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
+#include <asm/arch/common.h>
 #include <asm/arch/board.h>
 #include <asm/arch/control.h>
 #include <asm/arch/mux.h>
@@ -241,30 +242,70 @@ arch_initcall(omap_init_clocksource_32k);
 
 /* Global address base setup code */
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+static struct omap_globals *omap2_globals;
+
+static void __init __omap2_set_globals(void)
+{
+	omap2_set_globals_memory(omap2_globals);
+	omap2_set_globals_control(omap2_globals);
+	omap2_set_globals_prcm(omap2_globals);
+}
+
+#endif
+
 #if defined(CONFIG_ARCH_OMAP2420)
+
+static struct omap_globals omap242x_globals = {
+	.tap	= (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000),
+	.sdrc	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
+	.sms	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
+	.ctrl	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
+	.prm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
+	.cm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+};
+
 void __init omap2_set_globals_242x(void)
 {
-	omap2_sdrc_base = OMAP2420_SDRC_BASE;
-	omap2_sms_base = OMAP2420_SMS_BASE;
-	omap_ctrl_base_set(OMAP2420_CTRL_BASE);
+	omap2_globals = &omap242x_globals;
+	__omap2_set_globals();
 }
 #endif
 
 #if defined(CONFIG_ARCH_OMAP2430)
+
+static struct omap_globals omap243x_globals = {
+	.tap	= (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000),
+	.sdrc	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
+	.sms	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
+	.ctrl	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
+	.prm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
+	.cm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+};
+
 void __init omap2_set_globals_243x(void)
 {
-	omap2_sdrc_base = OMAP243X_SDRC_BASE;
-	omap2_sms_base = OMAP243X_SMS_BASE;
-	omap_ctrl_base_set(OMAP243X_CTRL_BASE);
+	omap2_globals = &omap243x_globals;
+	__omap2_set_globals();
 }
 #endif
 
 #if defined(CONFIG_ARCH_OMAP3430)
+
+static struct omap_globals omap343x_globals = {
+	.tap	= (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000),
+	.sdrc	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
+	.sms	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
+	.ctrl	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
+	.prm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
+	.cm	= (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+};
+
 void __init omap2_set_globals_343x(void)
 {
-	omap2_sdrc_base = OMAP343X_SDRC_BASE;
-	omap2_sms_base = OMAP343X_SMS_BASE;
-	omap_ctrl_base_set(OMAP343X_CTRL_BASE);
+	omap2_globals = &omap343x_globals;
+	__omap2_set_globals();
 }
 #endif
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 4a53f9ba6c43..81002b722da1 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -24,6 +24,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/menelaus.h>
+#include <asm/arch/mcbsp.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
@@ -145,6 +146,53 @@ static inline void omap_init_kp(void) {}
 #endif
 
 /*-------------------------------------------------------------------------*/
+#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
+
+static struct platform_device **omap_mcbsp_devices;
+
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+					int size)
+{
+	int i;
+
+	if (size > OMAP_MAX_MCBSP_COUNT) {
+		printk(KERN_WARNING "Registered too many McBSPs platform_data."
+			" Using maximum (%d) available.\n",
+			OMAP_MAX_MCBSP_COUNT);
+		size = OMAP_MAX_MCBSP_COUNT;
+	}
+
+	omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+				     GFP_KERNEL);
+	if (!omap_mcbsp_devices) {
+		printk(KERN_ERR "Could not register McBSP devices\n");
+		return;
+	}
+
+	for (i = 0; i < size; i++) {
+		struct platform_device *new_mcbsp;
+		int ret;
+
+		new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+		if (!new_mcbsp)
+			continue;
+		new_mcbsp->dev.platform_data = &config[i];
+		ret = platform_device_add(new_mcbsp);
+		if (ret) {
+			platform_device_put(new_mcbsp);
+			continue;
+		}
+		omap_mcbsp_devices[i] = new_mcbsp;
+	}
+}
+
+#else
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+					int size)
+{  }
+#endif
+
+/*-------------------------------------------------------------------------*/
 
 #if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 39c637b0ffea..fac8e994f588 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/plat-omap/dma.c
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  * Author: Juha Yrjölä <juha.yrjola@nokia.com>
  * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
  * Graphics DMA and LCD DMA graphics tranformations
@@ -25,11 +25,11 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>
 #include <asm/dma.h>
-#include <asm/io.h>
 
 #include <asm/arch/tc.h>
 
@@ -43,13 +43,13 @@ enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
 enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 #endif
 
-#define OMAP_DMA_ACTIVE		0x01
-#define OMAP_DMA_CCR_EN		(1 << 7)
+#define OMAP_DMA_ACTIVE			0x01
+#define OMAP_DMA_CCR_EN			(1 << 7)
 #define OMAP2_DMA_CSR_CLEAR_MASK	0xffe
 
-#define OMAP_FUNC_MUX_ARM_BASE	(0xfffe1000 + 0xec)
+#define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
 
-static int enable_1510_mode = 0;
+static int enable_1510_mode;
 
 struct omap_dma_lch {
 	int next_lch;
@@ -57,7 +57,7 @@ struct omap_dma_lch {
 	u16 saved_csr;
 	u16 enabled_irqs;
 	const char *dev_name;
-	void (* callback)(int lch, u16 ch_status, void *data);
+	void (*callback)(int lch, u16 ch_status, void *data);
 	void *data;
 
 #ifndef CONFIG_ARCH_OMAP1
@@ -72,7 +72,6 @@ struct omap_dma_lch {
 	long flags;
 };
 
-#ifndef CONFIG_ARCH_OMAP1
 struct dma_link_info {
 	int *linked_dmach_q;
 	int no_of_lchs_linked;
@@ -86,7 +85,9 @@ struct dma_link_info {
 
 };
 
-static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT];
+static struct dma_link_info *dma_linked_lch;
+
+#ifndef CONFIG_ARCH_OMAP1
 
 /* Chain handling macros */
 #define OMAP_DMA_CHAIN_QINIT(chain_id)					\
@@ -119,12 +120,15 @@ static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT];
 		dma_linked_lch[chain_id].q_count++; \
 	} while (0)
 #endif
+
+static int dma_lch_count;
 static int dma_chan_count;
 
 static spinlock_t dma_chan_lock;
-static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];
+static struct omap_dma_lch *dma_chan;
+static void __iomem *omap_dma_base;
 
-static const u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
+static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
 	INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
 	INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
 	INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
@@ -139,6 +143,24 @@ static inline void omap_enable_channel_irq(int lch);
 #define REVISIT_24XX()		printk(KERN_ERR "FIXME: no %s on 24xx\n", \
 						__func__);
 
+#define dma_read(reg)							\
+({									\
+	u32 __val;							\
+	if (cpu_class_is_omap1())					\
+		__val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg);	\
+	else								\
+		__val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg);	\
+	__val;								\
+})
+
+#define dma_write(val, reg)						\
+({									\
+	if (cpu_class_is_omap1())					\
+		__raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
+	else								\
+		__raw_writel((val), omap_dma_base + OMAP_DMA4_##reg);	\
+})
+
 #ifdef CONFIG_ARCH_OMAP15XX
 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
 int omap_dma_in_1510_mode(void)
@@ -173,13 +195,14 @@ static inline void set_gdma_dev(int req, int dev)
 #define set_gdma_dev(req, dev)	do {} while (0)
 #endif
 
+/* Omap1 only */
 static void clear_lch_regs(int lch)
 {
 	int i;
-	u32 lch_base = OMAP_DMA_BASE + lch * 0x40;
+	void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
 
 	for (i = 0; i < 0x2c; i += 2)
-		omap_writew(0, lch_base + i);
+		__raw_writew(0, lch_base + i);
 }
 
 void omap_set_dma_priority(int lch, int dst_port, int priority)
@@ -212,33 +235,49 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
 	}
 
 	if (cpu_class_is_omap2()) {
+		u32 ccr;
+
+		ccr = dma_read(CCR(lch));
 		if (priority)
-			OMAP_DMA_CCR_REG(lch) |= (1 << 6);
+			ccr |= (1 << 6);
 		else
-			OMAP_DMA_CCR_REG(lch) &= ~(1 << 6);
+			ccr &= ~(1 << 6);
+		dma_write(ccr, CCR(lch));
 	}
 }
+EXPORT_SYMBOL(omap_set_dma_priority);
 
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 				  int frame_count, int sync_mode,
 				  int dma_trigger, int src_or_dst_synch)
 {
-	OMAP_DMA_CSDP_REG(lch) &= ~0x03;
-	OMAP_DMA_CSDP_REG(lch) |= data_type;
+	u32 l;
+
+	l = dma_read(CSDP(lch));
+	l &= ~0x03;
+	l |= data_type;
+	dma_write(l, CSDP(lch));
 
 	if (cpu_class_is_omap1()) {
-		OMAP_DMA_CCR_REG(lch) &= ~(1 << 5);
+		u16 ccr;
+
+		ccr = dma_read(CCR(lch));
+		ccr &= ~(1 << 5);
 		if (sync_mode == OMAP_DMA_SYNC_FRAME)
-			OMAP_DMA_CCR_REG(lch) |= 1 << 5;
+			ccr |= 1 << 5;
+		dma_write(ccr, CCR(lch));
 
-		OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2);
+		ccr = dma_read(CCR2(lch));
+		ccr &= ~(1 << 2);
 		if (sync_mode == OMAP_DMA_SYNC_BLOCK)
-			OMAP1_DMA_CCR2_REG(lch) |= 1 << 2;
+			ccr |= 1 << 2;
+		dma_write(ccr, CCR2(lch));
 	}
 
 	if (cpu_class_is_omap2() && dma_trigger) {
-		u32 val = OMAP_DMA_CCR_REG(lch);
+		u32 val;
 
+		val = dma_read(CCR(lch));
 		val &= ~(3 << 19);
 		if (dma_trigger > 63)
 			val |= 1 << 20;
@@ -263,12 +302,13 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 		else
 			val &= ~(1 << 24);	/* dest synch */
 
-		OMAP_DMA_CCR_REG(lch) = val;
+		dma_write(val, CCR(lch));
 	}
 
-	OMAP_DMA_CEN_REG(lch) = elem_count;
-	OMAP_DMA_CFN_REG(lch) = frame_count;
+	dma_write(elem_count, CEN(lch));
+	dma_write(frame_count, CFN(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
@@ -281,7 +321,9 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 		return;
 	}
 
-	w = OMAP1_DMA_CCR2_REG(lch) & ~0x03;
+	w = dma_read(CCR2(lch));
+	w &= ~0x03;
+
 	switch (mode) {
 	case OMAP_DMA_CONSTANT_FILL:
 		w |= 0x01;
@@ -294,52 +336,81 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 	default:
 		BUG();
 	}
-	OMAP1_DMA_CCR2_REG(lch) = w;
+	dma_write(w, CCR2(lch));
 
-	w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f;
+	w = dma_read(LCH_CTRL(lch));
+	w &= ~0x0f;
 	/* Default is channel type 2D */
 	if (mode) {
-		OMAP1_DMA_COLOR_L_REG(lch) = (u16)color;
-		OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16);
+		dma_write((u16)color, COLOR_L(lch));
+		dma_write((u16)(color >> 16), COLOR_U(lch));
 		w |= 1;		/* Channel type G */
 	}
-	OMAP1_DMA_LCH_CTRL_REG(lch) = w;
+	dma_write(w, LCH_CTRL(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_color_mode);
 
 void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
 {
 	if (cpu_class_is_omap2()) {
-		OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16);
-		OMAP_DMA_CSDP_REG(lch) |= (mode << 16);
+		u32 csdp;
+
+		csdp = dma_read(CSDP(lch));
+		csdp &= ~(0x3 << 16);
+		csdp |= (mode << 16);
+		dma_write(csdp, CSDP(lch));
+	}
+}
+EXPORT_SYMBOL(omap_set_dma_write_mode);
+
+void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
+{
+	if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+		u32 l;
+
+		l = dma_read(LCH_CTRL(lch));
+		l &= ~0x7;
+		l |= mode;
+		dma_write(l, LCH_CTRL(lch));
 	}
 }
+EXPORT_SYMBOL(omap_set_dma_channel_mode);
 
 /* Note that src_port is only for omap1 */
 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
 			     unsigned long src_start,
 			     int src_ei, int src_fi)
 {
+	u32 l;
+
 	if (cpu_class_is_omap1()) {
-		OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2);
-		OMAP_DMA_CSDP_REG(lch) |= src_port << 2;
+		u16 w;
+
+		w = dma_read(CSDP(lch));
+		w &= ~(0x1f << 2);
+		w |= src_port << 2;
+		dma_write(w, CSDP(lch));
 	}
 
-	OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12);
-	OMAP_DMA_CCR_REG(lch) |= src_amode << 12;
+	l = dma_read(CCR(lch));
+	l &= ~(0x03 << 12);
+	l |= src_amode << 12;
+	dma_write(l, CCR(lch));
 
 	if (cpu_class_is_omap1()) {
-		OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16;
-		OMAP1_DMA_CSSA_L_REG(lch) = src_start;
+		dma_write(src_start >> 16, CSSA_U(lch));
+		dma_write((u16)src_start, CSSA_L(lch));
 	}
 
 	if (cpu_class_is_omap2())
-		OMAP2_DMA_CSSA_REG(lch) = src_start;
+		dma_write(src_start, CSSA(lch));
 
-	OMAP_DMA_CSEI_REG(lch) = src_ei;
-	OMAP_DMA_CSFI_REG(lch) = src_fi;
+	dma_write(src_ei, CSEI(lch));
+	dma_write(src_fi, CSFI(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_src_params);
 
-void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
+void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
 {
 	omap_set_dma_transfer_params(lch, params->data_type,
 				     params->elem_count, params->frame_count,
@@ -356,28 +427,37 @@ void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
 		omap_dma_set_prio_lch(lch, params->read_prio,
 				      params->write_prio);
 }
+EXPORT_SYMBOL(omap_set_dma_params);
 
 void omap_set_dma_src_index(int lch, int eidx, int fidx)
 {
-	if (cpu_class_is_omap2()) {
-		REVISIT_24XX();
+	if (cpu_class_is_omap2())
 		return;
-	}
-	OMAP_DMA_CSEI_REG(lch) = eidx;
-	OMAP_DMA_CSFI_REG(lch) = fidx;
+
+	dma_write(eidx, CSEI(lch));
+	dma_write(fidx, CSFI(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_src_index);
 
 void omap_set_dma_src_data_pack(int lch, int enable)
 {
-	OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6);
+	u32 l;
+
+	l = dma_read(CSDP(lch));
+	l &= ~(1 << 6);
 	if (enable)
-		OMAP_DMA_CSDP_REG(lch) |= (1 << 6);
+		l |= (1 << 6);
+	dma_write(l, CSDP(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_src_data_pack);
 
 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
 	unsigned int burst = 0;
-	OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
+	u32 l;
+
+	l = dma_read(CSDP(lch));
+	l &= ~(0x03 << 7);
 
 	switch (burst_mode) {
 	case OMAP_DMA_DATA_BURST_DIS:
@@ -408,55 +488,73 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	default:
 		BUG();
 	}
-	OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
+
+	l |= (burst << 7);
+	dma_write(l, CSDP(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
 
 /* Note that dest_port is only for OMAP1 */
 void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
 			      unsigned long dest_start,
 			      int dst_ei, int dst_fi)
 {
+	u32 l;
+
 	if (cpu_class_is_omap1()) {
-		OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9);
-		OMAP_DMA_CSDP_REG(lch) |= dest_port << 9;
+		l = dma_read(CSDP(lch));
+		l &= ~(0x1f << 9);
+		l |= dest_port << 9;
+		dma_write(l, CSDP(lch));
 	}
 
-	OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14);
-	OMAP_DMA_CCR_REG(lch) |= dest_amode << 14;
+	l = dma_read(CCR(lch));
+	l &= ~(0x03 << 14);
+	l |= dest_amode << 14;
+	dma_write(l, CCR(lch));
 
 	if (cpu_class_is_omap1()) {
-		OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16;
-		OMAP1_DMA_CDSA_L_REG(lch) = dest_start;
+		dma_write(dest_start >> 16, CDSA_U(lch));
+		dma_write(dest_start, CDSA_L(lch));
 	}
 
 	if (cpu_class_is_omap2())
-		OMAP2_DMA_CDSA_REG(lch) = dest_start;
+		dma_write(dest_start, CDSA(lch));
 
-	OMAP_DMA_CDEI_REG(lch) = dst_ei;
-	OMAP_DMA_CDFI_REG(lch) = dst_fi;
+	dma_write(dst_ei, CDEI(lch));
+	dma_write(dst_fi, CDFI(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_dest_params);
 
 void omap_set_dma_dest_index(int lch, int eidx, int fidx)
 {
-	if (cpu_class_is_omap2()) {
-		REVISIT_24XX();
+	if (cpu_class_is_omap2())
 		return;
-	}
-	OMAP_DMA_CDEI_REG(lch) = eidx;
-	OMAP_DMA_CDFI_REG(lch) = fidx;
+
+	dma_write(eidx, CDEI(lch));
+	dma_write(fidx, CDFI(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_dest_index);
 
 void omap_set_dma_dest_data_pack(int lch, int enable)
 {
-	OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13);
+	u32 l;
+
+	l = dma_read(CSDP(lch));
+	l &= ~(1 << 13);
 	if (enable)
-		OMAP_DMA_CSDP_REG(lch) |= 1 << 13;
+		l |= 1 << 13;
+	dma_write(l, CSDP(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
 
 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
 	unsigned int burst = 0;
-	OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
+	u32 l;
+
+	l = dma_read(CSDP(lch));
+	l &= ~(0x03 << 14);
 
 	switch (burst_mode) {
 	case OMAP_DMA_DATA_BURST_DIS:
@@ -486,8 +584,10 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 		BUG();
 		return;
 	}
-	OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
+	l |= (burst << 14);
+	dma_write(l, CSDP(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 
 static inline void omap_enable_channel_irq(int lch)
 {
@@ -495,62 +595,74 @@ static inline void omap_enable_channel_irq(int lch)
 
 	/* Clear CSR */
 	if (cpu_class_is_omap1())
-		status = OMAP_DMA_CSR_REG(lch);
+		status = dma_read(CSR(lch));
 	else if (cpu_class_is_omap2())
-		OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
+		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
 
 	/* Enable some nice interrupts. */
-	OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
+	dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
 }
 
 static void omap_disable_channel_irq(int lch)
 {
 	if (cpu_class_is_omap2())
-		OMAP_DMA_CICR_REG(lch) = 0;
+		dma_write(0, CICR(lch));
 }
 
 void omap_enable_dma_irq(int lch, u16 bits)
 {
 	dma_chan[lch].enabled_irqs |= bits;
 }
+EXPORT_SYMBOL(omap_enable_dma_irq);
 
 void omap_disable_dma_irq(int lch, u16 bits)
 {
 	dma_chan[lch].enabled_irqs &= ~bits;
 }
+EXPORT_SYMBOL(omap_disable_dma_irq);
 
 static inline void enable_lnk(int lch)
 {
+	u32 l;
+
+	l = dma_read(CLNK_CTRL(lch));
+
 	if (cpu_class_is_omap1())
-		OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14);
+		l &= ~(1 << 14);
 
 	/* Set the ENABLE_LNK bits */
 	if (dma_chan[lch].next_lch != -1)
-		OMAP_DMA_CLNK_CTRL_REG(lch) =
-			dma_chan[lch].next_lch | (1 << 15);
+		l = dma_chan[lch].next_lch | (1 << 15);
 
 #ifndef CONFIG_ARCH_OMAP1
-	if (dma_chan[lch].next_linked_ch != -1)
-		OMAP_DMA_CLNK_CTRL_REG(lch) =
-			dma_chan[lch].next_linked_ch | (1 << 15);
+	if (cpu_class_is_omap2())
+		if (dma_chan[lch].next_linked_ch != -1)
+			l = dma_chan[lch].next_linked_ch | (1 << 15);
 #endif
+
+	dma_write(l, CLNK_CTRL(lch));
 }
 
 static inline void disable_lnk(int lch)
 {
+	u32 l;
+
+	l = dma_read(CLNK_CTRL(lch));
+
 	/* Disable interrupts */
 	if (cpu_class_is_omap1()) {
-		OMAP_DMA_CICR_REG(lch) = 0;
+		dma_write(0, CICR(lch));
 		/* Set the STOP_LNK bit */
-		OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14;
+		l |= 1 << 14;
 	}
 
 	if (cpu_class_is_omap2()) {
 		omap_disable_channel_irq(lch);
 		/* Clear the ENABLE_LNK bit */
-		OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15);
+		l &= ~(1 << 15);
 	}
 
+	dma_write(l, CLNK_CTRL(lch));
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 
@@ -561,13 +673,13 @@ static inline void omap2_enable_irq_lch(int lch)
 	if (!cpu_class_is_omap2())
 		return;
 
-	val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+	val = dma_read(IRQENABLE_L0);
 	val |= 1 << lch;
-	omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+	dma_write(val, IRQENABLE_L0);
 }
 
 int omap_request_dma(int dev_id, const char *dev_name,
-		     void (* callback)(int lch, u16 ch_status, void *data),
+		     void (*callback)(int lch, u16 ch_status, void *data),
 		     void *data, int *dma_ch_out)
 {
 	int ch, free_ch = -1;
@@ -600,10 +712,14 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->dev_name = dev_name;
 	chan->callback = callback;
 	chan->data = data;
+
 #ifndef CONFIG_ARCH_OMAP1
-	chan->chain_id = -1;
-	chan->next_linked_ch = -1;
+	if (cpu_class_is_omap2()) {
+		chan->chain_id = -1;
+		chan->next_linked_ch = -1;
+	}
 #endif
+
 	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
 	if (cpu_class_is_omap1())
@@ -618,26 +734,28 @@ int omap_request_dma(int dev_id, const char *dev_name,
 			set_gdma_dev(free_ch + 1, dev_id);
 			dev_id = free_ch + 1;
 		}
-		/* Disable the 1510 compatibility mode and set the sync device
-		 * id. */
-		OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10);
+		/*
+		 * Disable the 1510 compatibility mode and set the sync device
+		 * id.
+		 */
+		dma_write(dev_id | (1 << 10), CCR(free_ch));
 	} else if (cpu_is_omap730() || cpu_is_omap15xx()) {
-		OMAP_DMA_CCR_REG(free_ch) = dev_id;
+		dma_write(dev_id, CCR(free_ch));
 	}
 
 	if (cpu_class_is_omap2()) {
 		omap2_enable_irq_lch(free_ch);
-
 		omap_enable_channel_irq(free_ch);
 		/* Clear the CSR register and IRQ status register */
-		OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
-		omap_writel(1 << free_ch, OMAP_DMA4_IRQSTATUS_L0);
+		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
+		dma_write(1 << free_ch, IRQSTATUS_L0);
 	}
 
 	*dma_ch_out = free_ch;
 
 	return 0;
 }
+EXPORT_SYMBOL(omap_request_dma);
 
 void omap_free_dma(int lch)
 {
@@ -645,11 +763,12 @@ void omap_free_dma(int lch)
 
 	spin_lock_irqsave(&dma_chan_lock, flags);
 	if (dma_chan[lch].dev_id == -1) {
-		printk("omap_dma: trying to free nonallocated DMA channel %d\n",
+		pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
 		       lch);
 		spin_unlock_irqrestore(&dma_chan_lock, flags);
 		return;
 	}
+
 	dma_chan[lch].dev_id = -1;
 	dma_chan[lch].next_lch = -1;
 	dma_chan[lch].callback = NULL;
@@ -657,30 +776,31 @@ void omap_free_dma(int lch)
 
 	if (cpu_class_is_omap1()) {
 		/* Disable all DMA interrupts for the channel. */
-		OMAP_DMA_CICR_REG(lch) = 0;
+		dma_write(0, CICR(lch));
 		/* Make sure the DMA transfer is stopped. */
-		OMAP_DMA_CCR_REG(lch) = 0;
+		dma_write(0, CCR(lch));
 	}
 
 	if (cpu_class_is_omap2()) {
 		u32 val;
 		/* Disable interrupts */
-		val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+		val = dma_read(IRQENABLE_L0);
 		val &= ~(1 << lch);
-		omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+		dma_write(val, IRQENABLE_L0);
 
 		/* Clear the CSR register and IRQ status register */
-		OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
-		omap_writel(1 << lch, OMAP_DMA4_IRQSTATUS_L0);
+		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
+		dma_write(1 << lch, IRQSTATUS_L0);
 
 		/* Disable all DMA interrupts for the channel. */
-		OMAP_DMA_CICR_REG(lch) = 0;
+		dma_write(0, CICR(lch));
 
 		/* Make sure the DMA transfer is stopped. */
-		OMAP_DMA_CCR_REG(lch) = 0;
+		dma_write(0, CCR(lch));
 		omap_clear_dma(lch);
 	}
 }
+EXPORT_SYMBOL(omap_free_dma);
 
 /**
  * @brief omap_dma_set_global_params : Set global priority settings for dma
@@ -708,7 +828,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
 	reg = (arb_rate & 0xff) << 16;
 	reg |= (0xff & max_fifo_depth);
 
-	omap_writel(reg, OMAP_DMA4_GCR_REG);
+	dma_write(reg, GCR);
 }
 EXPORT_SYMBOL(omap_dma_set_global_params);
 
@@ -725,20 +845,21 @@ int
 omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 		      unsigned char write_prio)
 {
-	u32 w;
+	u32 l;
 
-	if (unlikely((lch < 0 || lch >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+	if (unlikely((lch < 0 || lch >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid channel id\n");
 		return -EINVAL;
 	}
-	w = OMAP_DMA_CCR_REG(lch);
-	w &= ~((1 << 6) | (1 << 26));
+	l = dma_read(CCR(lch));
+	l &= ~((1 << 6) | (1 << 26));
 	if (cpu_is_omap2430() || cpu_is_omap34xx())
-		w |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
+		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 	else
-		w |= ((read_prio & 0x1) << 6);
+		l |= ((read_prio & 0x1) << 6);
+
+	dma_write(l, CCR(lch));
 
-	OMAP_DMA_CCR_REG(lch) = w;
 	return 0;
 }
 EXPORT_SYMBOL(omap_dma_set_prio_lch);
@@ -754,28 +875,34 @@ void omap_clear_dma(int lch)
 	local_irq_save(flags);
 
 	if (cpu_class_is_omap1()) {
-		int status;
-		OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
+		u32 l;
+
+		l = dma_read(CCR(lch));
+		l &= ~OMAP_DMA_CCR_EN;
+		dma_write(l, CCR(lch));
 
 		/* Clear pending interrupts */
-		status = OMAP_DMA_CSR_REG(lch);
+		l = dma_read(CSR(lch));
 	}
 
 	if (cpu_class_is_omap2()) {
 		int i;
-		u32 lch_base = OMAP_DMA4_BASE + lch * 0x60 + 0x80;
+		void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
 		for (i = 0; i < 0x44; i += 4)
-			omap_writel(0, lch_base + i);
+			__raw_writel(0, lch_base + i);
 	}
 
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL(omap_clear_dma);
 
 void omap_start_dma(int lch)
 {
+	u32 l;
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch;
-		char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
+		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
 
 		dma_chan_link_map[lch] = 1;
 		/* Set the link register of the first channel */
@@ -799,27 +926,34 @@ void omap_start_dma(int lch)
 		} while (next_lch != -1);
 	} else if (cpu_class_is_omap2()) {
 		/* Errata: Need to write lch even if not using chaining */
-		OMAP_DMA_CLNK_CTRL_REG(lch) = lch;
+		dma_write(lch, CLNK_CTRL(lch));
 	}
 
 	omap_enable_channel_irq(lch);
 
-	/* Errata: On ES2.0 BUFFERING disable must be set.
-	 * This will always fail on ES1.0 */
-	if (cpu_is_omap24xx()) {
-		OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
-	}
+	l = dma_read(CCR(lch));
+
+	/*
+	 * Errata: On ES2.0 BUFFERING disable must be set.
+	 * This will always fail on ES1.0
+	 */
+	if (cpu_is_omap24xx())
+		l |= OMAP_DMA_CCR_EN;
 
-	OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
+	l |= OMAP_DMA_CCR_EN;
+	dma_write(l, CCR(lch));
 
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
+EXPORT_SYMBOL(omap_start_dma);
 
 void omap_stop_dma(int lch)
 {
+	u32 l;
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
-		char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
+		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
 
 		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
 		do {
@@ -840,18 +974,22 @@ void omap_stop_dma(int lch)
 
 	/* Disable all interrupts on the channel */
 	if (cpu_class_is_omap1())
-		OMAP_DMA_CICR_REG(lch) = 0;
+		dma_write(0, CICR(lch));
+
+	l = dma_read(CCR(lch));
+	l &= ~OMAP_DMA_CCR_EN;
+	dma_write(l, CCR(lch));
 
-	OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
+EXPORT_SYMBOL(omap_stop_dma);
 
 /*
  * Allows changing the DMA callback function or data. This may be needed if
  * the driver shares a single DMA channel for multiple dma triggers.
  */
 int omap_set_dma_callback(int lch,
-			  void (* callback)(int lch, u16 ch_status, void *data),
+			  void (*callback)(int lch, u16 ch_status, void *data),
 			  void *data)
 {
 	unsigned long flags;
@@ -871,6 +1009,7 @@ int omap_set_dma_callback(int lch,
 
 	return 0;
 }
+EXPORT_SYMBOL(omap_set_dma_callback);
 
 /*
  * Returns current physical source address for the given DMA channel.
@@ -884,15 +1023,24 @@ dma_addr_t omap_get_dma_src_pos(int lch)
 {
 	dma_addr_t offset = 0;
 
-	if (cpu_class_is_omap1())
-		offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
-				       (OMAP1_DMA_CSSA_U_REG(lch) << 16));
+	if (cpu_is_omap15xx())
+		offset = dma_read(CPC(lch));
+	else
+		offset = dma_read(CSAC(lch));
 
-	if (cpu_class_is_omap2())
-		offset = OMAP_DMA_CSAC_REG(lch);
+	/*
+	 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+	 * read before the DMA controller finished disabling the channel.
+	 */
+	if (!cpu_is_omap15xx() && offset == 0)
+		offset = dma_read(CSAC(lch));
+
+	if (cpu_class_is_omap1())
+		offset |= (dma_read(CSSA_U(lch)) << 16);
 
 	return offset;
 }
+EXPORT_SYMBOL(omap_get_dma_src_pos);
 
 /*
  * Returns current physical destination address for the given DMA channel.
@@ -906,25 +1054,30 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
 {
 	dma_addr_t offset = 0;
 
-	if (cpu_class_is_omap1())
-		offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
-				       (OMAP1_DMA_CDSA_U_REG(lch) << 16));
+	if (cpu_is_omap15xx())
+		offset = dma_read(CPC(lch));
+	else
+		offset = dma_read(CDAC(lch));
 
-	if (cpu_class_is_omap2())
-		offset = OMAP_DMA_CDAC_REG(lch);
+	/*
+	 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+	 * read before the DMA controller finished disabling the channel.
+	 */
+	if (!cpu_is_omap15xx() && offset == 0)
+		offset = dma_read(CDAC(lch));
+
+	if (cpu_class_is_omap1())
+		offset |= (dma_read(CDSA_U(lch)) << 16);
 
 	return offset;
 }
+EXPORT_SYMBOL(omap_get_dma_dst_pos);
 
-/*
- * Returns current source transfer counting for the given DMA channel.
- * Can be used to monitor the progress of a transfer inside a block.
- * It must be called with disabled interrupts.
- */
-int omap_get_dma_src_addr_counter(int lch)
+int omap_get_dma_active_status(int lch)
 {
-	return (dma_addr_t) OMAP_DMA_CSAC_REG(lch);
+	return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
 }
+EXPORT_SYMBOL(omap_get_dma_active_status);
 
 int omap_dma_running(void)
 {
@@ -936,7 +1089,7 @@ int omap_dma_running(void)
 			return 1;
 
 	for (lch = 0; lch < dma_chan_count; lch++)
-		if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN)
+		if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
 			return 1;
 
 	return 0;
@@ -947,7 +1100,7 @@ int omap_dma_running(void)
  * For this DMA link to start, you still need to start (see omap_start_dma)
  * the first one. That will fire up the entire queue.
  */
-void omap_dma_link_lch (int lch_head, int lch_queue)
+void omap_dma_link_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -964,11 +1117,12 @@ void omap_dma_link_lch (int lch_head, int lch_queue)
 
 	dma_chan[lch_head].next_lch = lch_queue;
 }
+EXPORT_SYMBOL(omap_dma_link_lch);
 
 /*
  * Once the DMA queue is stopped, we can destroy it.
  */
-void omap_dma_unlink_lch (int lch_head, int lch_queue)
+void omap_dma_unlink_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -983,7 +1137,6 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue)
 		dump_stack();
 	}
 
-
 	if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
 	    (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
 		printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
@@ -993,12 +1146,15 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue)
 
 	dma_chan[lch_head].next_lch = -1;
 }
+EXPORT_SYMBOL(omap_dma_unlink_lch);
+
+/*----------------------------------------------------------------------------*/
 
 #ifndef CONFIG_ARCH_OMAP1
 /* Create chain of DMA channesls */
 static void create_dma_lch_chain(int lch_head, int lch_queue)
 {
-	u32 w;
+	u32 l;
 
 	/* Check if this is the first link in chain */
 	if (dma_chan[lch_head].next_linked_ch == -1) {
@@ -1018,15 +1174,15 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
 					lch_queue;
 	}
 
-	w = OMAP_DMA_CLNK_CTRL_REG(lch_head);
-	w &= ~(0x1f);
-	w |= lch_queue;
-	OMAP_DMA_CLNK_CTRL_REG(lch_head) = w;
+	l = dma_read(CLNK_CTRL(lch_head));
+	l &= ~(0x1f);
+	l |= lch_queue;
+	dma_write(l, CLNK_CTRL(lch_head));
 
-	w = OMAP_DMA_CLNK_CTRL_REG(lch_queue);
-	w &= ~(0x1f);
-	w |= (dma_chan[lch_queue].next_linked_ch);
-	OMAP_DMA_CLNK_CTRL_REG(lch_queue) = w;
+	l = dma_read(CLNK_CTRL(lch_queue));
+	l &= ~(0x1f);
+	l |= (dma_chan[lch_queue].next_linked_ch);
+	dma_write(l, CLNK_CTRL(lch_queue));
 }
 
 /**
@@ -1061,7 +1217,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
 	}
 
 	if (unlikely((no_of_chans < 1
-			|| no_of_chans > OMAP_LOGICAL_DMA_CH_COUNT))) {
+			|| no_of_chans > dma_lch_count))) {
 		printk(KERN_ERR "Invalid Number of channels requested\n");
 		return -EINVAL;
 	}
@@ -1116,6 +1272,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
 		for (i = 0; i < (no_of_chans - 1); i++)
 			create_dma_lch_chain(channels[i], channels[i + 1]);
 	}
+
 	return 0;
 }
 EXPORT_SYMBOL(omap_request_dma_chain);
@@ -1138,7 +1295,7 @@ int omap_modify_dma_chain_params(int chain_id,
 
 	/* Check for input params */
 	if (unlikely((chain_id < 0
-			|| chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+			|| chain_id >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid chain id\n");
 		return -EINVAL;
 	}
@@ -1158,6 +1315,7 @@ int omap_modify_dma_chain_params(int chain_id,
 		 */
 		omap_set_dma_params(channels[i], &params);
 	}
+
 	return 0;
 }
 EXPORT_SYMBOL(omap_modify_dma_chain_params);
@@ -1176,7 +1334,7 @@ int omap_free_dma_chain(int chain_id)
 	u32 i;
 
 	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid chain id\n");
 		return -EINVAL;
 	}
@@ -1201,6 +1359,7 @@ int omap_free_dma_chain(int chain_id)
 	dma_linked_lch[chain_id].linked_dmach_q = NULL;
 	dma_linked_lch[chain_id].chain_mode = -1;
 	dma_linked_lch[chain_id].chain_state = -1;
+
 	return (0);
 }
 EXPORT_SYMBOL(omap_free_dma_chain);
@@ -1216,7 +1375,7 @@ EXPORT_SYMBOL(omap_free_dma_chain);
 int omap_dma_chain_status(int chain_id)
 {
 	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid chain id\n");
 		return -EINVAL;
 	}
@@ -1231,6 +1390,7 @@ int omap_dma_chain_status(int chain_id)
 
 	if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
 		return OMAP_DMA_CHAIN_INACTIVE;
+
 	return OMAP_DMA_CHAIN_ACTIVE;
 }
 EXPORT_SYMBOL(omap_dma_chain_status);
@@ -1253,11 +1413,13 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 			int elem_count, int frame_count, void *callbk_data)
 {
 	int *channels;
-	u32 w, lch;
+	u32 l, lch;
 	int start_dma = 0;
 
-	/* if buffer size is less than 1 then there is
-	 * no use of starting the chain */
+	/*
+	 * if buffer size is less than 1 then there is
+	 * no use of starting the chain
+	 */
 	if (elem_count < 1) {
 		printk(KERN_ERR "Invalid buffer size\n");
 		return -EINVAL;
@@ -1265,7 +1427,7 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 
 	/* Check for input params */
 	if (unlikely((chain_id < 0
-			|| chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+			|| chain_id >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid chain id\n");
 		return -EINVAL;
 	}
@@ -1294,20 +1456,24 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 
 	/* Set the params to the free channel */
 	if (src_start != 0)
-		OMAP2_DMA_CSSA_REG(lch) = src_start;
+		dma_write(src_start, CSSA(lch));
 	if (dest_start != 0)
-		OMAP2_DMA_CDSA_REG(lch) = dest_start;
+		dma_write(dest_start, CDSA(lch));
 
 	/* Write the buffer size */
-	OMAP_DMA_CEN_REG(lch) = elem_count;
-	OMAP_DMA_CFN_REG(lch) = frame_count;
+	dma_write(elem_count, CEN(lch));
+	dma_write(frame_count, CFN(lch));
 
-	/* If the chain is dynamically linked,
-	 * then we may have to start the chain if its not active */
+	/*
+	 * If the chain is dynamically linked,
+	 * then we may have to start the chain if its not active
+	 */
 	if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
 
-		/* In Dynamic chain, if the chain is not started,
-		 * queue the channel */
+		/*
+		 * In Dynamic chain, if the chain is not started,
+		 * queue the channel
+		 */
 		if (dma_linked_lch[chain_id].chain_state ==
 						DMA_CHAIN_NOTSTARTED) {
 			/* Enable the link in previous channel */
@@ -1317,8 +1483,10 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 			dma_chan[lch].state = DMA_CH_QUEUED;
 		}
 
-		/* Chain is already started, make sure its active,
-		 * if not then start the chain */
+		/*
+		 * Chain is already started, make sure its active,
+		 * if not then start the chain
+		 */
 		else {
 			start_dma = 1;
 
@@ -1327,8 +1495,8 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 				enable_lnk(dma_chan[lch].prev_linked_ch);
 				dma_chan[lch].state = DMA_CH_QUEUED;
 				start_dma = 0;
-				if (0 == ((1 << 7) & (OMAP_DMA_CCR_REG
-					(dma_chan[lch].prev_linked_ch)))) {
+				if (0 == ((1 << 7) & dma_read(
+					CCR(dma_chan[lch].prev_linked_ch)))) {
 					disable_lnk(dma_chan[lch].
 						    prev_linked_ch);
 					pr_debug("\n prev ch is stopped\n");
@@ -1344,27 +1512,28 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 			}
 			omap_enable_channel_irq(lch);
 
-			w = OMAP_DMA_CCR_REG(lch);
+			l = dma_read(CCR(lch));
 
-			if ((0 == (w & (1 << 24))))
-				w &= ~(1 << 25);
+			if ((0 == (l & (1 << 24))))
+				l &= ~(1 << 25);
 			else
-				w |= (1 << 25);
+				l |= (1 << 25);
 			if (start_dma == 1) {
-				if (0 == (w & (1 << 7))) {
-					w |= (1 << 7);
+				if (0 == (l & (1 << 7))) {
+					l |= (1 << 7);
 					dma_chan[lch].state = DMA_CH_STARTED;
 					pr_debug("starting %d\n", lch);
-					OMAP_DMA_CCR_REG(lch) = w;
+					dma_write(l, CCR(lch));
 				} else
 					start_dma = 0;
 			} else {
-				if (0 == (w & (1 << 7)))
-					OMAP_DMA_CCR_REG(lch) = w;
+				if (0 == (l & (1 << 7)))
+					dma_write(l, CCR(lch));
 			}
 			dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 		}
 	}
+
 	return 0;
 }
 EXPORT_SYMBOL(omap_dma_chain_a_transfer);
@@ -1380,9 +1549,9 @@ EXPORT_SYMBOL(omap_dma_chain_a_transfer);
 int omap_start_dma_chain_transfers(int chain_id)
 {
 	int *channels;
-	u32 w, i;
+	u32 l, i;
 
-	if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid chain id\n");
 		return -EINVAL;
 	}
@@ -1404,18 +1573,19 @@ int omap_start_dma_chain_transfers(int chain_id)
 		omap_enable_channel_irq(channels[0]);
 	}
 
-	w = OMAP_DMA_CCR_REG(channels[0]);
-	w |= (1 << 7);
+	l = dma_read(CCR(channels[0]));
+	l |= (1 << 7);
 	dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
 	dma_chan[channels[0]].state = DMA_CH_STARTED;
 
-	if ((0 == (w & (1 << 24))))
-		w &= ~(1 << 25);
+	if ((0 == (l & (1 << 24))))
+		l &= ~(1 << 25);
 	else
-		w |= (1 << 25);
-	OMAP_DMA_CCR_REG(channels[0]) = w;
+		l |= (1 << 25);
+	dma_write(l, CCR(channels[0]));
 
 	dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
+
 	return 0;
 }
 EXPORT_SYMBOL(omap_start_dma_chain_transfers);
@@ -1431,11 +1601,11 @@ EXPORT_SYMBOL(omap_start_dma_chain_transfers);
 int omap_stop_dma_chain_transfers(int chain_id)
 {
 	int *channels;
-	u32 w, i;
+	u32 l, i;
 	u32 sys_cf;
 
 	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid chain id\n");
 		return -EINVAL;
 	}
@@ -1447,21 +1617,22 @@ int omap_stop_dma_chain_transfers(int chain_id)
 	}
 	channels = dma_linked_lch[chain_id].linked_dmach_q;
 
-	/* DMA Errata:
+	/*
+	 * DMA Errata:
 	 * Special programming model needed to disable DMA before end of block
 	 */
-	sys_cf = omap_readl(OMAP_DMA4_OCP_SYSCONFIG);
-	w = sys_cf;
+	sys_cf = dma_read(OCP_SYSCONFIG);
+	l = sys_cf;
 	/* Middle mode reg set no Standby */
-	w &= ~((1 << 12)|(1 << 13));
-	omap_writel(w, OMAP_DMA4_OCP_SYSCONFIG);
+	l &= ~((1 << 12)|(1 << 13));
+	dma_write(l, OCP_SYSCONFIG);
 
 	for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
 
 		/* Stop the Channel transmission */
-		w = OMAP_DMA_CCR_REG(channels[i]);
-		w &= ~(1 << 7);
-		OMAP_DMA_CCR_REG(channels[i]) = w;
+		l = dma_read(CCR(channels[i]));
+		l &= ~(1 << 7);
+		dma_write(l, CCR(channels[i]));
 
 		/* Disable the link in all the channels */
 		disable_lnk(channels[i]);
@@ -1474,7 +1645,8 @@ int omap_stop_dma_chain_transfers(int chain_id)
 	OMAP_DMA_CHAIN_QINIT(chain_id);
 
 	/* Errata - put in the old value */
-	omap_writel(sys_cf, OMAP_DMA4_OCP_SYSCONFIG);
+	dma_write(sys_cf, OCP_SYSCONFIG);
+
 	return 0;
 }
 EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
@@ -1497,7 +1669,7 @@ int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
 	int *channels;
 
 	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid chain id\n");
 		return -EINVAL;
 	}
@@ -1515,8 +1687,8 @@ int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
 	/* Get the current channel */
 	lch = channels[dma_linked_lch[chain_id].q_head];
 
-	*ei = OMAP2_DMA_CCEN_REG(lch);
-	*fi = OMAP2_DMA_CCFN_REG(lch);
+	*ei = dma_read(CCEN(lch));
+	*fi = dma_read(CCFN(lch));
 
 	return 0;
 }
@@ -1537,7 +1709,7 @@ int omap_get_dma_chain_dst_pos(int chain_id)
 	int *channels;
 
 	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid chain id\n");
 		return -EINVAL;
 	}
@@ -1553,7 +1725,7 @@ int omap_get_dma_chain_dst_pos(int chain_id)
 	/* Get the current channel */
 	lch = channels[dma_linked_lch[chain_id].q_head];
 
-	return (OMAP_DMA_CDAC_REG(lch));
+	return dma_read(CDAC(lch));
 }
 EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
 
@@ -1571,7 +1743,7 @@ int omap_get_dma_chain_src_pos(int chain_id)
 	int *channels;
 
 	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
 		printk(KERN_ERR "Invalid chain id\n");
 		return -EINVAL;
 	}
@@ -1587,10 +1759,10 @@ int omap_get_dma_chain_src_pos(int chain_id)
 	/* Get the current channel */
 	lch = channels[dma_linked_lch[chain_id].q_head];
 
-	return (OMAP_DMA_CSAC_REG(lch));
+	return dma_read(CSAC(lch));
 }
 EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
-#endif
+#endif	/* ifndef CONFIG_ARCH_OMAP1 */
 
 /*----------------------------------------------------------------------------*/
 
@@ -1598,13 +1770,13 @@ EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
 
 static int omap1_dma_handle_ch(int ch)
 {
-	u16 csr;
+	u32 csr;
 
 	if (enable_1510_mode && ch >= 6) {
 		csr = dma_chan[ch].saved_csr;
 		dma_chan[ch].saved_csr = 0;
 	} else
-		csr = OMAP_DMA_CSR_REG(ch);
+		csr = dma_read(CSR(ch));
 	if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
 		dma_chan[ch + 6].saved_csr = csr >> 7;
 		csr &= 0x7f;
@@ -1626,6 +1798,7 @@ static int omap1_dma_handle_ch(int ch)
 		dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+
 	return 1;
 }
 
@@ -1656,12 +1829,13 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 
 static int omap2_dma_handle_ch(int ch)
 {
-	u32 status = OMAP_DMA_CSR_REG(ch);
+	u32 status = dma_read(CSR(ch));
 
 	if (!status) {
 		if (printk_ratelimit())
-			printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n", ch);
-		omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
+			printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
+				ch);
+		dma_write(1 << ch, IRQSTATUS_L0);
 		return 0;
 	}
 	if (unlikely(dma_chan[ch].dev_id == -1)) {
@@ -1684,14 +1858,14 @@ static int omap2_dma_handle_ch(int ch)
 		printk(KERN_INFO "DMA misaligned error with device %d\n",
 		       dma_chan[ch].dev_id);
 
-	OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
-	omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
+	dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
+	dma_write(1 << ch, IRQSTATUS_L0);
 
 	/* If the ch is not chained then chain_id will be -1 */
 	if (dma_chan[ch].chain_id != -1) {
 		int chain_id = dma_chan[ch].chain_id;
 		dma_chan[ch].state = DMA_CH_NOTSTARTED;
-		if (OMAP_DMA_CLNK_CTRL_REG(ch) & (1 << 15))
+		if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
 			dma_chan[dma_chan[ch].next_linked_ch].state =
 							DMA_CH_STARTED;
 		if (dma_linked_lch[chain_id].chain_mode ==
@@ -1701,13 +1875,13 @@ static int omap2_dma_handle_ch(int ch)
 		if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
 			OMAP_DMA_CHAIN_INCQHEAD(chain_id);
 
-		status = OMAP_DMA_CSR_REG(ch);
+		status = dma_read(CSR(ch));
 	}
 
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
 
-	OMAP_DMA_CSR_REG(ch) = status;
+	dma_write(status, CSR(ch));
 
 	return 0;
 }
@@ -1718,13 +1892,13 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
 	u32 val;
 	int i;
 
-	val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+	val = dma_read(IRQSTATUS_L0);
 	if (val == 0) {
 		if (printk_ratelimit())
 			printk(KERN_WARNING "Spurious DMA IRQ\n");
 		return IRQ_HANDLED;
 	}
-	for (i = 0; i < OMAP_LOGICAL_DMA_CH_COUNT && val != 0; i++) {
+	for (i = 0; i < dma_lch_count && val != 0; i++) {
 		if (val & 1)
 			omap2_dma_handle_ch(i);
 		val >>= 1;
@@ -1748,7 +1922,7 @@ static struct irqaction omap24xx_dma_irq;
 static struct lcd_dma_info {
 	spinlock_t lock;
 	int reserved;
-	void (* callback)(u16 status, void *data);
+	void (*callback)(u16 status, void *data);
 	void *cb_data;
 
 	int active;
@@ -1770,6 +1944,7 @@ void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
 	lcd_dma.xres = fb_xres;
 	lcd_dma.yres = fb_yres;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
 
 void omap_set_lcd_dma_src_port(int port)
 {
@@ -1780,12 +1955,13 @@ void omap_set_lcd_dma_ext_controller(int external)
 {
 	lcd_dma.ext_ctrl = external;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
 
 void omap_set_lcd_dma_single_transfer(int single)
 {
 	lcd_dma.single_transfer = single;
 }
-
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
 
 void omap_set_lcd_dma_b1_rotation(int rotate)
 {
@@ -1796,6 +1972,7 @@ void omap_set_lcd_dma_b1_rotation(int rotate)
 	}
 	lcd_dma.rotate = rotate;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
 
 void omap_set_lcd_dma_b1_mirror(int mirror)
 {
@@ -1805,6 +1982,7 @@ void omap_set_lcd_dma_b1_mirror(int mirror)
 	}
 	lcd_dma.mirror = mirror;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
@@ -1815,6 +1993,7 @@ void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 	}
 	lcd_dma.vxres = vxres;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
 
 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 {
@@ -1825,6 +2004,7 @@ void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 	lcd_dma.xscale = xscale;
 	lcd_dma.yscale = yscale;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
 
 static void set_b1_regs(void)
 {
@@ -1855,8 +2035,11 @@ static void set_b1_regs(void)
 	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
 	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
 	BUG_ON(vxres < lcd_dma.xres);
-#define PIXADDR(x,y) (lcd_dma.addr + ((y) * vxres * yscale + (x) * xscale) * es)
+
+#define PIXADDR(x, y) (lcd_dma.addr +					\
+		((y) * vxres * yscale + (x) * xscale) * es)
 #define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
 	switch (lcd_dma.rotate) {
 	case 0:
 		if (!lcd_dma.mirror) {
@@ -1865,8 +2048,8 @@ static void set_b1_regs(void)
 			/* 1510 DMA requires the bottom address to be 2 more
 			 * than the actual last memory access location. */
 			if (omap_dma_in_1510_mode() &&
-			    lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
-				bottom += 2;
+				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+					bottom += 2;
 			ei = PIXSTEP(0, 0, 1, 0);
 			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
 		} else {
@@ -1993,7 +2176,7 @@ static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
 			 void *data)
 {
 	spin_lock_irq(&lcd_dma.lock);
@@ -2019,6 +2202,7 @@ int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
 
 	return 0;
 }
+EXPORT_SYMBOL(omap_request_lcd_dma);
 
 void omap_free_lcd_dma(void)
 {
@@ -2035,12 +2219,14 @@ void omap_free_lcd_dma(void)
 	lcd_dma.reserved = 0;
 	spin_unlock(&lcd_dma.lock);
 }
+EXPORT_SYMBOL(omap_free_lcd_dma);
 
 void omap_enable_lcd_dma(void)
 {
 	u16 w;
 
-	/* Set the Enable bit only if an external controller is
+	/*
+	 * Set the Enable bit only if an external controller is
 	 * connected. Otherwise the OMAP internal controller will
 	 * start the transfer when it gets enabled.
 	 */
@@ -2057,6 +2243,7 @@ void omap_enable_lcd_dma(void)
 	w |= 1 << 7;
 	omap_writew(w, OMAP1610_DMA_LCD_CCR);
 }
+EXPORT_SYMBOL(omap_enable_lcd_dma);
 
 void omap_setup_lcd_dma(void)
 {
@@ -2072,16 +2259,18 @@ void omap_setup_lcd_dma(void)
 		u16 w;
 
 		w = omap_readw(OMAP1610_DMA_LCD_CCR);
-		/* If DMA was already active set the end_prog bit to have
+		/*
+		 * If DMA was already active set the end_prog bit to have
 		 * the programmed register set loaded into the active
 		 * register set.
 		 */
 		w |= 1 << 11;		/* End_prog */
 		if (!lcd_dma.single_transfer)
-	        	w |= (3 << 8);	/* Auto_init, repeat */
+			w |= (3 << 8);	/* Auto_init, repeat */
 		omap_writew(w, OMAP1610_DMA_LCD_CCR);
 	}
 }
+EXPORT_SYMBOL(omap_setup_lcd_dma);
 
 void omap_stop_lcd_dma(void)
 {
@@ -2099,6 +2288,7 @@ void omap_stop_lcd_dma(void)
 	w &= ~(1 << 8);
 	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 }
+EXPORT_SYMBOL(omap_stop_lcd_dma);
 
 /*----------------------------------------------------------------------------*/
 
@@ -2106,27 +2296,55 @@ static int __init omap_init_dma(void)
 {
 	int ch, r;
 
+	if (cpu_class_is_omap1()) {
+		omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE);
+		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
+	} else if (cpu_is_omap24xx()) {
+		omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+	} else if (cpu_is_omap34xx()) {
+		omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+	} else {
+		pr_err("DMA init failed for unsupported omap\n");
+		return -ENODEV;
+	}
+
+	dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
+				GFP_KERNEL);
+	if (!dma_chan)
+		return -ENOMEM;
+
+	if (cpu_class_is_omap2()) {
+		dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
+						dma_lch_count, GFP_KERNEL);
+		if (!dma_linked_lch) {
+			kfree(dma_chan);
+			return -ENOMEM;
+		}
+	}
+
 	if (cpu_is_omap15xx()) {
 		printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
 		dma_chan_count = 9;
 		enable_1510_mode = 1;
 	} else if (cpu_is_omap16xx() || cpu_is_omap730()) {
 		printk(KERN_INFO "OMAP DMA hardware version %d\n",
-		       omap_readw(OMAP_DMA_HW_ID));
+		       dma_read(HW_ID));
 		printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
-		       (omap_readw(OMAP_DMA_CAPS_0_U) << 16) |
-		       omap_readw(OMAP_DMA_CAPS_0_L),
-		       (omap_readw(OMAP_DMA_CAPS_1_U) << 16) |
-		       omap_readw(OMAP_DMA_CAPS_1_L),
-		       omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3),
-		       omap_readw(OMAP_DMA_CAPS_4));
+		       (dma_read(CAPS_0_U) << 16) |
+		       dma_read(CAPS_0_L),
+		       (dma_read(CAPS_1_U) << 16) |
+		       dma_read(CAPS_1_L),
+		       dma_read(CAPS_2), dma_read(CAPS_3),
+		       dma_read(CAPS_4));
 		if (!enable_1510_mode) {
 			u16 w;
 
 			/* Disable OMAP 3.0/3.1 compatibility mode. */
-			w = omap_readw(OMAP_DMA_GSCR);
+			w = dma_read(GSCR);
 			w |= 1 << 3;
-			omap_writew(w, OMAP_DMA_GSCR);
+			dma_write(w, GSCR);
 			dma_chan_count = 16;
 		} else
 			dma_chan_count = 9;
@@ -2139,19 +2357,17 @@ static int __init omap_init_dma(void)
 			omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 		}
 	} else if (cpu_class_is_omap2()) {
-		u8 revision = omap_readb(OMAP_DMA4_REVISION);
+		u8 revision = dma_read(REVISION) & 0xff;
 		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
 		       revision >> 4, revision & 0xf);
-		dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT;
+		dma_chan_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		dma_chan_count = 0;
 		return 0;
 	}
 
-	memset(&lcd_dma, 0, sizeof(lcd_dma));
 	spin_lock_init(&lcd_dma.lock);
 	spin_lock_init(&dma_chan_lock);
-	memset(&dma_chan, 0, sizeof(dma_chan));
 
 	for (ch = 0; ch < dma_chan_count; ch++) {
 		omap_clear_dma(ch);
@@ -2162,8 +2378,10 @@ static int __init omap_init_dma(void)
 			continue;
 
 		if (cpu_class_is_omap1()) {
-			/* request_irq() doesn't like dev_id (ie. ch) being
-			 * zero, so we have to kludge around this. */
+			/*
+			 * request_irq() doesn't like dev_id (ie. ch) being
+			 * zero, so we have to kludge around this.
+			 */
 			r = request_irq(omap1_dma_irq[ch],
 					omap1_dma_irq_handler, 0, "DMA",
 					(void *) (ch + 1));
@@ -2208,48 +2426,4 @@ static int __init omap_init_dma(void)
 
 arch_initcall(omap_init_dma);
 
-EXPORT_SYMBOL(omap_get_dma_src_pos);
-EXPORT_SYMBOL(omap_get_dma_dst_pos);
-EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
-EXPORT_SYMBOL(omap_clear_dma);
-EXPORT_SYMBOL(omap_set_dma_priority);
-EXPORT_SYMBOL(omap_request_dma);
-EXPORT_SYMBOL(omap_free_dma);
-EXPORT_SYMBOL(omap_start_dma);
-EXPORT_SYMBOL(omap_stop_dma);
-EXPORT_SYMBOL(omap_set_dma_callback);
-EXPORT_SYMBOL(omap_enable_dma_irq);
-EXPORT_SYMBOL(omap_disable_dma_irq);
-
-EXPORT_SYMBOL(omap_set_dma_transfer_params);
-EXPORT_SYMBOL(omap_set_dma_color_mode);
-EXPORT_SYMBOL(omap_set_dma_write_mode);
-
-EXPORT_SYMBOL(omap_set_dma_src_params);
-EXPORT_SYMBOL(omap_set_dma_src_index);
-EXPORT_SYMBOL(omap_set_dma_src_data_pack);
-EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
-
-EXPORT_SYMBOL(omap_set_dma_dest_params);
-EXPORT_SYMBOL(omap_set_dma_dest_index);
-EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
-EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
-
-EXPORT_SYMBOL(omap_set_dma_params);
-
-EXPORT_SYMBOL(omap_dma_link_lch);
-EXPORT_SYMBOL(omap_dma_unlink_lch);
-
-EXPORT_SYMBOL(omap_request_lcd_dma);
-EXPORT_SYMBOL(omap_free_lcd_dma);
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-EXPORT_SYMBOL(omap_stop_lcd_dma);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 302ad8dff2cb..f22506af0e67 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -38,34 +38,113 @@
 #include <asm/arch/irqs.h>
 
 /* register offsets */
-#define OMAP_TIMER_ID_REG		0x00
-#define OMAP_TIMER_OCP_CFG_REG		0x10
-#define OMAP_TIMER_SYS_STAT_REG		0x14
-#define OMAP_TIMER_STAT_REG		0x18
-#define OMAP_TIMER_INT_EN_REG		0x1c
-#define OMAP_TIMER_WAKEUP_EN_REG	0x20
-#define OMAP_TIMER_CTRL_REG		0x24
-#define OMAP_TIMER_COUNTER_REG		0x28
-#define OMAP_TIMER_LOAD_REG		0x2c
-#define OMAP_TIMER_TRIGGER_REG		0x30
-#define OMAP_TIMER_WRITE_PEND_REG	0x34
-#define OMAP_TIMER_MATCH_REG		0x38
-#define OMAP_TIMER_CAPTURE_REG		0x3c
-#define OMAP_TIMER_IF_CTRL_REG		0x40
-
-/* timer control reg bits */
-#define OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
-#define OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
-#define OMAP_TIMER_CTRL_PT		(1 << 12)
-#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
-#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
-#define OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
-#define OMAP_TIMER_CTRL_SCPWM		(1 << 7)
-#define OMAP_TIMER_CTRL_CE		(1 << 6)	/* compare enable */
-#define OMAP_TIMER_CTRL_PRE		(1 << 5)	/* prescaler enable */
-#define OMAP_TIMER_CTRL_PTV_SHIFT	2		/* how much to shift the prescaler value */
-#define OMAP_TIMER_CTRL_AR		(1 << 1)	/* auto-reload enable */
-#define OMAP_TIMER_CTRL_ST		(1 << 0)	/* start timer */
+#define _OMAP_TIMER_ID_OFFSET		0x00
+#define _OMAP_TIMER_OCP_CFG_OFFSET	0x10
+#define _OMAP_TIMER_SYS_STAT_OFFSET	0x14
+#define _OMAP_TIMER_STAT_OFFSET		0x18
+#define _OMAP_TIMER_INT_EN_OFFSET	0x1c
+#define _OMAP_TIMER_WAKEUP_EN_OFFSET	0x20
+#define _OMAP_TIMER_CTRL_OFFSET		0x24
+#define		OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
+#define		OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
+#define		OMAP_TIMER_CTRL_PT		(1 << 12)
+#define		OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
+#define		OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
+#define		OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
+#define		OMAP_TIMER_CTRL_SCPWM		(1 << 7)
+#define		OMAP_TIMER_CTRL_CE		(1 << 6) /* compare enable */
+#define		OMAP_TIMER_CTRL_PRE		(1 << 5) /* prescaler enable */
+#define		OMAP_TIMER_CTRL_PTV_SHIFT	2 /* prescaler value shift */
+#define		OMAP_TIMER_CTRL_POSTED		(1 << 2)
+#define		OMAP_TIMER_CTRL_AR		(1 << 1) /* auto-reload enable */
+#define		OMAP_TIMER_CTRL_ST		(1 << 0) /* start timer */
+#define _OMAP_TIMER_COUNTER_OFFSET	0x28
+#define _OMAP_TIMER_LOAD_OFFSET		0x2c
+#define _OMAP_TIMER_TRIGGER_OFFSET	0x30
+#define _OMAP_TIMER_WRITE_PEND_OFFSET	0x34
+#define		WP_NONE			0	/* no write pending bit */
+#define		WP_TCLR			(1 << 0)
+#define		WP_TCRR			(1 << 1)
+#define		WP_TLDR			(1 << 2)
+#define		WP_TTGR			(1 << 3)
+#define		WP_TMAR			(1 << 4)
+#define		WP_TPIR			(1 << 5)
+#define		WP_TNIR			(1 << 6)
+#define		WP_TCVR			(1 << 7)
+#define		WP_TOCR			(1 << 8)
+#define		WP_TOWR			(1 << 9)
+#define _OMAP_TIMER_MATCH_OFFSET	0x38
+#define _OMAP_TIMER_CAPTURE_OFFSET	0x3c
+#define _OMAP_TIMER_IF_CTRL_OFFSET	0x40
+#define _OMAP_TIMER_CAPTURE2_OFFSET		0x44	/* TCAR2, 34xx only */
+#define _OMAP_TIMER_TICK_POS_OFFSET		0x48	/* TPIR, 34xx only */
+#define _OMAP_TIMER_TICK_NEG_OFFSET		0x4c	/* TNIR, 34xx only */
+#define _OMAP_TIMER_TICK_COUNT_OFFSET		0x50	/* TCVR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET	0x54	/* TOCR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET	0x58	/* TOWR, 34xx only */
+
+/* register offsets with the write pending bit encoded */
+#define	WPSHIFT					16
+
+#define OMAP_TIMER_ID_REG			(_OMAP_TIMER_ID_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_OCP_CFG_REG			(_OMAP_TIMER_OCP_CFG_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_SYS_STAT_REG			(_OMAP_TIMER_SYS_STAT_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_STAT_REG			(_OMAP_TIMER_STAT_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_INT_EN_REG			(_OMAP_TIMER_INT_EN_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_WAKEUP_EN_REG		(_OMAP_TIMER_WAKEUP_EN_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CTRL_REG			(_OMAP_TIMER_CTRL_OFFSET \
+							| (WP_TCLR << WPSHIFT))
+
+#define OMAP_TIMER_COUNTER_REG			(_OMAP_TIMER_COUNTER_OFFSET \
+							| (WP_TCRR << WPSHIFT))
+
+#define OMAP_TIMER_LOAD_REG			(_OMAP_TIMER_LOAD_OFFSET \
+							| (WP_TLDR << WPSHIFT))
+
+#define OMAP_TIMER_TRIGGER_REG			(_OMAP_TIMER_TRIGGER_OFFSET \
+							| (WP_TTGR << WPSHIFT))
+
+#define OMAP_TIMER_WRITE_PEND_REG		(_OMAP_TIMER_WRITE_PEND_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_MATCH_REG			(_OMAP_TIMER_MATCH_OFFSET \
+							| (WP_TMAR << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE_REG			(_OMAP_TIMER_CAPTURE_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_IF_CTRL_REG			(_OMAP_TIMER_IF_CTRL_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE2_REG			(_OMAP_TIMER_CAPTURE2_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_TICK_POS_REG			(_OMAP_TIMER_TICK_POS_OFFSET \
+							| (WP_TPIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_NEG_REG			(_OMAP_TIMER_TICK_NEG_OFFSET \
+							| (WP_TNIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_COUNT_REG		(_OMAP_TIMER_TICK_COUNT_OFFSET \
+							| (WP_TCVR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_SET_REG				\
+		(_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
+		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
 struct omap_dm_timer {
 	unsigned long phys_base;
@@ -76,6 +155,7 @@ struct omap_dm_timer {
 	void __iomem *io_base;
 	unsigned reserved:1;
 	unsigned enabled:1;
+	unsigned posted:1;
 };
 
 #ifdef CONFIG_ARCH_OMAP1
@@ -181,16 +261,34 @@ static struct clk **dm_source_clocks;
 
 static spinlock_t dm_timer_lock;
 
-static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+/*
+ * Reads timer registers in posted and non-posted mode. The posted mode bit
+ * is encoded in reg. Note that in posted mode write pending bit must be
+ * checked. Otherwise a read of a non completed write will produce an error.
+ */
+static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
 {
-	return readl(timer->io_base + reg);
+	if (timer->posted)
+		while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+				& (reg >> WPSHIFT))
+			cpu_relax();
+	return readl(timer->io_base + (reg & 0xff));
 }
 
-static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+/*
+ * Writes timer registers in posted and non-posted mode. The posted mode bit
+ * is encoded in reg. Note that in posted mode the write pending bit must be
+ * checked. Otherwise a write on a register which has a pending write will be
+ * lost.
+ */
+static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
+						u32 value)
 {
-	writel(value, timer->io_base + reg);
-	while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG))
-		;
+	if (timer->posted)
+		while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+				& (reg >> WPSHIFT))
+			cpu_relax();
+	writel(value, timer->io_base + (reg & 0xff));
 }
 
 static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
@@ -217,17 +315,23 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
 	}
 	omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
 
-	/* Set to smart-idle mode */
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
-	l |= 0x02 << 3;
-
-	if (cpu_class_is_omap2() && timer == &dm_timers[0]) {
-		/* Enable wake-up only for GPT1 on OMAP2 CPUs*/
+	l |= 0x02 << 3;  /* Set to smart-idle mode */
+	l |= 0x2 << 8;   /* Set clock activity to perserve f-clock on idle */
+
+	/*
+	 * Enable wake-up only for GPT1 on OMAP2 CPUs.
+	 * FIXME: All timers should have wake-up enabled and clear
+	 * PRCM status.
+	 */
+	if (cpu_class_is_omap2() && (timer == &dm_timers[0]))
 		l |= 1 << 2;
-		/* Non-posted mode */
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0);
-	}
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+
+	/* Match hardware reset default of posted mode */
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
+			OMAP_TIMER_CTRL_POSTED);
+	timer->posted = 1;
 }
 
 static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
@@ -434,9 +538,32 @@ void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
 		l &= ~OMAP_TIMER_CTRL_AR;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+
+	/* REVISIT: hw feature, ttgr overtaking tldr? */
+	while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)))
+		cpu_relax();
+
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
 
+/* Optimized set_load which removes costly spin wait in timer_start */
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
+                            unsigned int load)
+{
+	u32 l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	if (autoreload)
+		l |= OMAP_TIMER_CTRL_AR;
+	else
+		l &= ~OMAP_TIMER_CTRL_AR;
+	l |= OMAP_TIMER_CTRL_ST;
+
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
 void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
 			     unsigned int match)
 {
@@ -451,7 +578,6 @@ void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
 }
 
-
 void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
 			   int toggle, int trigger)
 {
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 7854f19b77cf..5d107520e6b9 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -23,6 +23,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
@@ -182,7 +183,7 @@ void __init omapfb_reserve_sdram(void)
 		return;
 
 	bdata = NODE_DATA(0)->bdata;
-	sdram_start = bdata->node_boot_start;
+	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
 	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
 	reserved = 0;
 	for (i = 0; ; i++) {
@@ -340,5 +341,3 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 
 
 #endif
-
-
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 1903a3491ee9..d8e9c2c3f0f6 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1488,6 +1488,9 @@ static int __init _omap_gpio_init(void)
 		bank->chip.set = gpio_set;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP1
+			bank->chip.dev = &omap_mpuio_device.dev;
+#endif
 			bank->chip.base = OMAP_MPUIO(0);
 		} else {
 			bank->chip.label = "gpio";
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 6f33f58bca45..ff1413eae0b8 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -334,7 +334,7 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 	}
 
 	mbox->dev.class = &omap_mbox_class;
-	strlcpy(mbox->dev.bus_id, mbox->name, KOBJ_NAME_LEN);
+	dev_set_name(&mbox->dev, "%s", mbox->name);
 	dev_set_drvdata(&mbox->dev, mbox);
 
 	ret = device_register(&mbox->dev);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 9cf83c4da9fa..c7f74064696c 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -15,95 +15,66 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/wait.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
 
 #include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/dsp_common.h>
 #include <asm/arch/mcbsp.h>
 
-#ifdef CONFIG_MCBSP_DEBUG
-#define DBG(x...)	printk(x)
-#else
-#define DBG(x...)			do { } while (0)
-#endif
-
-struct omap_mcbsp {
-	u32                          io_base;
-	u8                           id;
-	u8                           free;
-	omap_mcbsp_word_length       rx_word_length;
-	omap_mcbsp_word_length       tx_word_length;
-
-	omap_mcbsp_io_type_t         io_type; /* IRQ or poll */
-	/* IRQ based TX/RX */
-	int                          rx_irq;
-	int                          tx_irq;
-
-	/* DMA stuff */
-	u8                           dma_rx_sync;
-	short                        dma_rx_lch;
-	u8                           dma_tx_sync;
-	short                        dma_tx_lch;
-
-	/* Completion queues */
-	struct completion            tx_irq_completion;
-	struct completion            rx_irq_completion;
-	struct completion            tx_dma_completion;
-	struct completion            rx_dma_completion;
-
-	spinlock_t                   lock;
-};
-
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
-#ifdef CONFIG_ARCH_OMAP1
-static struct clk *mcbsp_dsp_ck = 0;
-static struct clk *mcbsp_api_ck = 0;
-static struct clk *mcbsp_dspxor_ck = 0;
-#endif
-#ifdef CONFIG_ARCH_OMAP2
-static struct clk *mcbsp1_ick = 0;
-static struct clk *mcbsp1_fck = 0;
-static struct clk *mcbsp2_ick = 0;
-static struct clk *mcbsp2_fck = 0;
-#endif
+
+#define omap_mcbsp_check_valid_id(id)	(mcbsp[id].pdata && \
+					mcbsp[id].pdata->ops && \
+					mcbsp[id].pdata->ops->check && \
+					(mcbsp[id].pdata->ops->check(id) == 0))
 
 static void omap_mcbsp_dump_reg(u8 id)
 {
-	DBG("**** MCBSP%d regs ****\n", mcbsp[id].id);
-	DBG("DRR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
-	DBG("DRR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
-	DBG("DXR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
-	DBG("DXR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
-	DBG("SPCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
-	DBG("SPCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
-	DBG("RCR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
-	DBG("RCR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
-	DBG("XCR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
-	DBG("XCR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
-	DBG("SRGR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
-	DBG("SRGR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
-	DBG("PCR0:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
-	DBG("***********************\n");
+	dev_dbg(mcbsp[id].dev, "**** McBSP%d regs ****\n", mcbsp[id].id);
+	dev_dbg(mcbsp[id].dev, "DRR2:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
+	dev_dbg(mcbsp[id].dev, "DRR1:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
+	dev_dbg(mcbsp[id].dev, "DXR2:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
+	dev_dbg(mcbsp[id].dev, "DXR1:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
+	dev_dbg(mcbsp[id].dev, "SPCR2: 0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
+	dev_dbg(mcbsp[id].dev, "SPCR1: 0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
+	dev_dbg(mcbsp[id].dev, "RCR2:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
+	dev_dbg(mcbsp[id].dev, "RCR1:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
+	dev_dbg(mcbsp[id].dev, "XCR2:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
+	dev_dbg(mcbsp[id].dev, "XCR1:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
+	dev_dbg(mcbsp[id].dev, "SRGR2: 0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
+	dev_dbg(mcbsp[id].dev, "SRGR1: 0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
+	dev_dbg(mcbsp[id].dev, "PCR0:  0x%04x\n",
+			OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
+	dev_dbg(mcbsp[id].dev, "***********************\n");
 }
 
 static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_tx = dev_id;
 
-	DBG("TX IRQ callback : 0x%x\n",
-	    OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
+		OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
 
 	complete(&mcbsp_tx->tx_irq_completion);
+
 	return IRQ_HANDLED;
 }
 
@@ -111,10 +82,11 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_rx = dev_id;
 
-	DBG("RX IRQ callback : 0x%x\n",
-	    OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
+		OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
 
 	complete(&mcbsp_rx->rx_irq_completion);
+
 	return IRQ_HANDLED;
 }
 
@@ -122,8 +94,8 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
 {
 	struct omap_mcbsp *mcbsp_dma_tx = data;
 
-	DBG("TX DMA callback : 0x%x\n",
-	    OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+	dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n",
+		OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
 
 	/* We can free the channels */
 	omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
@@ -136,8 +108,8 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
 {
 	struct omap_mcbsp *mcbsp_dma_rx = data;
 
-	DBG("RX DMA callback : 0x%x\n",
-	    OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+	dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n",
+		OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
 
 	/* We can free the channels */
 	omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
@@ -146,19 +118,24 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
 	complete(&mcbsp_dma_rx->rx_dma_completion);
 }
 
-
 /*
  * omap_mcbsp_config simply write a config to the
  * appropriate McBSP.
  * You either call this function or set the McBSP registers
  * by yourself before calling omap_mcbsp_start().
  */
-
-void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config)
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 {
-	u32 io_base = mcbsp[id].io_base;
+	u32 io_base;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
 
-	DBG("OMAP-McBSP: McBSP%d  io_base: 0x%8x\n", id+1, io_base);
+	io_base = mcbsp[id].io_base;
+	dev_dbg(mcbsp[id].dev, "Configuring McBSP%d  io_base: 0x%8x\n",
+			mcbsp[id].id, io_base);
 
 	/* We write the given config */
 	OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
@@ -173,83 +150,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config
 	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
 	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
 }
-
-
-
-static int omap_mcbsp_check(unsigned int id)
-{
-	if (cpu_is_omap730()) {
-		if (id > OMAP_MAX_MCBSP_COUNT - 1) {
-		       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
-		       return -1;
-		}
-		return 0;
-	}
-
-	if (cpu_is_omap15xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) {
-		if (id > OMAP_MAX_MCBSP_COUNT) {
-			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
-			return -1;
-		}
-		return 0;
-	}
-
-	return -1;
-}
-
-#ifdef CONFIG_ARCH_OMAP1
-static void omap_mcbsp_dsp_request(void)
-{
-	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-		int ret;
-
-		ret = omap_dsp_request_mem();
-		if (ret < 0) {
-			printk(KERN_ERR "Could not get dsp memory: %i\n", ret);
-			return;
-		}
-
-		clk_enable(mcbsp_dsp_ck);
-		clk_enable(mcbsp_api_ck);
-
-		/* enable 12MHz clock to mcbsp 1 & 3 */
-		clk_enable(mcbsp_dspxor_ck);
-
-		/*
-		 * DSP external peripheral reset
-		 * FIXME: This should be moved to dsp code
-		 */
-		__raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
-			     DSP_RSTCT2);
-	}
-}
-
-static void omap_mcbsp_dsp_free(void)
-{
-	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-		omap_dsp_release_mem();
-		clk_disable(mcbsp_dspxor_ck);
-		clk_disable(mcbsp_dsp_ck);
-		clk_disable(mcbsp_api_ck);
-	}
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-static void omap2_mcbsp2_mux_setup(void)
-{
-	if (cpu_is_omap2420()) {
-		omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
-		omap_cfg_reg(R14_24XX_MCBSP2_FSX);
-		omap_cfg_reg(W15_24XX_MCBSP2_DR);
-		omap_cfg_reg(V15_24XX_MCBSP2_DX);
-		omap_cfg_reg(V14_24XX_GPIO117);
-	}
-	/*
-	 * Need to add MUX settings for OMAP 2430 SDP
-	 */
-}
-#endif
+EXPORT_SYMBOL(omap_mcbsp_config);
 
 /*
  * We can choose between IRQ based or polled IO.
@@ -257,13 +158,16 @@ static void omap2_mcbsp2_mux_setup(void)
  */
 int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
 {
-	if (omap_mcbsp_check(id) < 0)
-		return -EINVAL;
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
 
 	spin_lock(&mcbsp[id].lock);
 
 	if (!mcbsp[id].free) {
-		printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1);
+		dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
+			mcbsp[id].id);
 		spin_unlock(&mcbsp[id].lock);
 		return -EINVAL;
 	}
@@ -274,38 +178,26 @@ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
 
 	return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_set_io_type);
 
 int omap_mcbsp_request(unsigned int id)
 {
 	int err;
 
-	if (omap_mcbsp_check(id) < 0)
-		return -EINVAL;
-
-#ifdef CONFIG_ARCH_OMAP1
-	/*
-	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
-	 * are DSP public peripherals.
-	 */
-	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
-		omap_mcbsp_dsp_request();
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-	if (cpu_is_omap24xx()) {
-		if (id == OMAP_MCBSP1) {
-			clk_enable(mcbsp1_ick);
-			clk_enable(mcbsp1_fck);
-		} else {
-			clk_enable(mcbsp2_ick);
-			clk_enable(mcbsp2_fck);
-		}
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
 	}
-#endif
+
+	if (mcbsp[id].pdata->ops->request)
+		mcbsp[id].pdata->ops->request(id);
+
+	clk_enable(mcbsp[id].clk);
 
 	spin_lock(&mcbsp[id].lock);
 	if (!mcbsp[id].free) {
-		printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1);
+		dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
+			mcbsp[id].id);
 		spin_unlock(&mcbsp[id].lock);
 		return -1;
 	}
@@ -315,24 +207,23 @@ int omap_mcbsp_request(unsigned int id)
 
 	if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) {
 		/* We need to get IRQs here */
-		err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, 0,
-				  "McBSP",
-				  (void *) (&mcbsp[id]));
+		err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler,
+					0, "McBSP", (void *) (&mcbsp[id]));
 		if (err != 0) {
-			printk(KERN_ERR "OMAP-McBSP: Unable to request TX IRQ %d for McBSP%d\n",
-			       mcbsp[id].tx_irq, mcbsp[id].id);
+			dev_err(mcbsp[id].dev, "Unable to request TX IRQ %d "
+					"for McBSP%d\n", mcbsp[id].tx_irq,
+					mcbsp[id].id);
 			return err;
 		}
 
 		init_completion(&(mcbsp[id].tx_irq_completion));
 
-
-		err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, 0,
-				  "McBSP",
-				  (void *) (&mcbsp[id]));
+		err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler,
+					0, "McBSP", (void *) (&mcbsp[id]));
 		if (err != 0) {
-			printk(KERN_ERR "OMAP-McBSP: Unable to request RX IRQ %d for McBSP%d\n",
-			       mcbsp[id].rx_irq, mcbsp[id].id);
+			dev_err(mcbsp[id].dev, "Unable to request RX IRQ %d "
+					"for McBSP%d\n", mcbsp[id].rx_irq,
+					mcbsp[id].id);
 			free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
 			return err;
 		}
@@ -341,36 +232,25 @@ int omap_mcbsp_request(unsigned int id)
 	}
 
 	return 0;
-
 }
+EXPORT_SYMBOL(omap_mcbsp_request);
 
 void omap_mcbsp_free(unsigned int id)
 {
-	if (omap_mcbsp_check(id) < 0)
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return;
-
-#ifdef CONFIG_ARCH_OMAP1
-	if (cpu_class_is_omap1()) {
-		if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
-			omap_mcbsp_dsp_free();
 	}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-	if (cpu_is_omap24xx()) {
-		if (id == OMAP_MCBSP1) {
-			clk_disable(mcbsp1_ick);
-			clk_disable(mcbsp1_fck);
-		} else {
-			clk_disable(mcbsp2_ick);
-			clk_disable(mcbsp2_fck);
-		}
-	}
-#endif
+
+	if (mcbsp[id].pdata->ops->free)
+		mcbsp[id].pdata->ops->free(id);
+
+	clk_disable(mcbsp[id].clk);
 
 	spin_lock(&mcbsp[id].lock);
 	if (mcbsp[id].free) {
-		printk (KERN_ERR "OMAP-McBSP: McBSP%d was not reserved\n", id + 1);
+		dev_err(mcbsp[id].dev, "McBSP%d was not reserved\n",
+			mcbsp[id].id);
 		spin_unlock(&mcbsp[id].lock);
 		return;
 	}
@@ -384,6 +264,7 @@ void omap_mcbsp_free(unsigned int id)
 		free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
 	}
 }
+EXPORT_SYMBOL(omap_mcbsp_free);
 
 /*
  * Here we start the McBSP, by enabling the sample
@@ -395,13 +276,15 @@ void omap_mcbsp_start(unsigned int id)
 	u32 io_base;
 	u16 w;
 
-	if (omap_mcbsp_check(id) < 0)
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return;
+	}
 
 	io_base = mcbsp[id].io_base;
 
-	mcbsp[id].rx_word_length = ((OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7);
-	mcbsp[id].tx_word_length = ((OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7);
+	mcbsp[id].rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
+	mcbsp[id].tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
 
 	/* Start the sample generator */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
@@ -422,20 +305,22 @@ void omap_mcbsp_start(unsigned int id)
 
 	/* Dump McBSP Regs */
 	omap_mcbsp_dump_reg(id);
-
 }
+EXPORT_SYMBOL(omap_mcbsp_start);
 
 void omap_mcbsp_stop(unsigned int id)
 {
 	u32 io_base;
 	u16 w;
 
-	if (omap_mcbsp_check(id) < 0)
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return;
+	}
 
 	io_base = mcbsp[id].io_base;
 
-        /* Reset transmitter */
+	/* Reset transmitter */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
 	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
 
@@ -447,12 +332,19 @@ void omap_mcbsp_stop(unsigned int id)
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
 	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
 }
-
+EXPORT_SYMBOL(omap_mcbsp_stop);
 
 /* polled mcbsp i/o operations */
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 {
-	u32 base = mcbsp[id].io_base;
+	u32 base;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+
+	base = mcbsp[id].io_base;
 	writew(buf, base + OMAP_MCBSP_REG_DXR1);
 	/* if frame sync error - clear the error */
 	if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
@@ -474,18 +366,27 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 				       (XRST),
 				       base + OMAP_MCBSP_REG_SPCR2);
 				udelay(10);
-				printk(KERN_ERR
-				       " Could not write to McBSP Register\n");
+				dev_err(mcbsp[id].dev, "Could not write to"
+					" McBSP%d Register\n", mcbsp[id].id);
 				return -2;
 			}
 		}
 	}
+
 	return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_pollwrite);
 
-int omap_mcbsp_pollread(unsigned int id, u16 * buf)
+int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 {
-	u32 base = mcbsp[id].io_base;
+	u32 base;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+
+	base = mcbsp[id].io_base;
 	/* if frame sync error - clear the error */
 	if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
 		/* clear error */
@@ -506,15 +407,17 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf)
 				       (RRST),
 				       base + OMAP_MCBSP_REG_SPCR1);
 				udelay(10);
-				printk(KERN_ERR
-				       " Could not read from McBSP Register\n");
+				dev_err(mcbsp[id].dev, "Could not read from"
+					" McBSP%d Register\n", mcbsp[id].id);
 				return -2;
 			}
 		}
 	}
 	*buf = readw(base + OMAP_MCBSP_REG_DRR1);
+
 	return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_pollread);
 
 /*
  * IRQ based word transmission.
@@ -522,12 +425,15 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf)
 void omap_mcbsp_xmit_word(unsigned int id, u32 word)
 {
 	u32 io_base;
-	omap_mcbsp_word_length word_length = mcbsp[id].tx_word_length;
+	omap_mcbsp_word_length word_length;
 
-	if (omap_mcbsp_check(id) < 0)
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return;
+	}
 
 	io_base = mcbsp[id].io_base;
+	word_length = mcbsp[id].tx_word_length;
 
 	wait_for_completion(&(mcbsp[id].tx_irq_completion));
 
@@ -535,16 +441,20 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word)
 		OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
 	OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
 }
+EXPORT_SYMBOL(omap_mcbsp_xmit_word);
 
 u32 omap_mcbsp_recv_word(unsigned int id)
 {
 	u32 io_base;
 	u16 word_lsb, word_msb = 0;
-	omap_mcbsp_word_length word_length = mcbsp[id].rx_word_length;
+	omap_mcbsp_word_length word_length;
 
-	if (omap_mcbsp_check(id) < 0)
-		return -EINVAL;
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
 
+	word_length = mcbsp[id].rx_word_length;
 	io_base = mcbsp[id].io_base;
 
 	wait_for_completion(&(mcbsp[id].rx_irq_completion));
@@ -555,15 +465,24 @@ u32 omap_mcbsp_recv_word(unsigned int id)
 
 	return (word_lsb | (word_msb << 16));
 }
-
+EXPORT_SYMBOL(omap_mcbsp_recv_word);
 
 int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 {
-	u32 io_base = mcbsp[id].io_base;
-	omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length;
-	omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length;
+	u32 io_base;
+	omap_mcbsp_word_length tx_word_length;
+	omap_mcbsp_word_length rx_word_length;
 	u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
 
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+
+	io_base = mcbsp[id].io_base;
+	tx_word_length = mcbsp[id].tx_word_length;
+	rx_word_length = mcbsp[id].rx_word_length;
+
 	if (tx_word_length != rx_word_length)
 		return -EINVAL;
 
@@ -577,7 +496,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 			udelay(10);
 			OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
 			udelay(10);
-			printk("McBSP transmitter not ready\n");
+			dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
+				"ready\n", mcbsp[id].id);
 			return -EAGAIN;
 		}
 	}
@@ -597,7 +517,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 			udelay(10);
 			OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
 			udelay(10);
-			printk("McBSP receiver not ready\n");
+			dev_err(mcbsp[id].dev, "McBSP%d receiver not "
+				"ready\n", mcbsp[id].id);
 			return -EAGAIN;
 		}
 	}
@@ -609,14 +530,24 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 
 	return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
 
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 {
-	u32 io_base = mcbsp[id].io_base, clock_word = 0;
-	omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length;
-	omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length;
+	u32 io_base, clock_word = 0;
+	omap_mcbsp_word_length tx_word_length;
+	omap_mcbsp_word_length rx_word_length;
 	u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
 
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+
+	io_base = mcbsp[id].io_base;
+	tx_word_length = mcbsp[id].tx_word_length;
+	rx_word_length = mcbsp[id].rx_word_length;
+
 	if (tx_word_length != rx_word_length)
 		return -EINVAL;
 
@@ -630,7 +561,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
 			udelay(10);
 			OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
 			udelay(10);
-			printk("McBSP transmitter not ready\n");
+			dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
+				"ready\n", mcbsp[id].id);
 			return -EAGAIN;
 		}
 	}
@@ -650,7 +582,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
 			udelay(10);
 			OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
 			udelay(10);
-			printk("McBSP receiver not ready\n");
+			dev_err(mcbsp[id].dev, "McBSP%d receiver not "
+				"ready\n", mcbsp[id].id);
 			return -EAGAIN;
 		}
 	}
@@ -664,7 +597,7 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
 
 	return 0;
 }
-
+EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
 
 /*
  * Simple DMA based buffer rx/tx routines.
@@ -673,25 +606,32 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
  * For anything fancier, you should use your own customized DMA
  * routines and callbacks.
  */
-int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
+				unsigned int length)
 {
 	int dma_tx_ch;
 	int src_port = 0;
 	int dest_port = 0;
 	int sync_dev = 0;
 
-	if (omap_mcbsp_check(id) < 0)
-		return -EINVAL;
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
 
-	if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback,
-			     &mcbsp[id],
-			     &dma_tx_ch)) {
-		printk("OMAP-McBSP: Unable to request DMA channel for McBSP%d TX. Trying IRQ based TX\n", id+1);
+	if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX",
+				omap_mcbsp_tx_dma_callback,
+				&mcbsp[id],
+				&dma_tx_ch)) {
+		dev_err(mcbsp[id].dev, " Unable to request DMA channel for "
+				"McBSP%d TX. Trying IRQ based TX\n",
+				mcbsp[id].id);
 		return -EAGAIN;
 	}
 	mcbsp[id].dma_tx_lch = dma_tx_ch;
 
-	DBG("TX DMA on channel %d\n", dma_tx_ch);
+	dev_err(mcbsp[id].dev, "McBSP%d TX DMA on channel %d\n", mcbsp[id].id,
+		dma_tx_ch);
 
 	init_completion(&(mcbsp[id].tx_dma_completion));
 
@@ -699,7 +639,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
 		src_port = OMAP_DMA_PORT_TIPB;
 		dest_port = OMAP_DMA_PORT_EMIFF;
 	}
-	if (cpu_is_omap24xx())
+	if (cpu_class_is_omap2())
 		sync_dev = mcbsp[id].dma_tx_sync;
 
 	omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
@@ -722,29 +662,37 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
 
 	omap_start_dma(mcbsp[id].dma_tx_lch);
 	wait_for_completion(&(mcbsp[id].tx_dma_completion));
+
 	return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
 
-
-int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
+				unsigned int length)
 {
 	int dma_rx_ch;
 	int src_port = 0;
 	int dest_port = 0;
 	int sync_dev = 0;
 
-	if (omap_mcbsp_check(id) < 0)
-		return -EINVAL;
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
 
-	if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback,
-			     &mcbsp[id],
-			     &dma_rx_ch)) {
-		printk("Unable to request DMA channel for McBSP%d RX. Trying IRQ based RX\n", id+1);
+	if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX",
+				omap_mcbsp_rx_dma_callback,
+				&mcbsp[id],
+				&dma_rx_ch)) {
+		dev_err(mcbsp[id].dev, "Unable to request DMA channel for "
+				"McBSP%d RX. Trying IRQ based RX\n",
+				mcbsp[id].id);
 		return -EAGAIN;
 	}
 	mcbsp[id].dma_rx_lch = dma_rx_ch;
 
-	DBG("RX DMA on channel %d\n", dma_rx_ch);
+	dev_err(mcbsp[id].dev, "McBSP%d RX DMA on channel %d\n", mcbsp[id].id,
+		dma_rx_ch);
 
 	init_completion(&(mcbsp[id].rx_dma_completion));
 
@@ -752,14 +700,14 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
 		src_port = OMAP_DMA_PORT_TIPB;
 		dest_port = OMAP_DMA_PORT_EMIFF;
 	}
-	if (cpu_is_omap24xx())
+	if (cpu_class_is_omap2())
 		sync_dev = mcbsp[id].dma_rx_sync;
 
 	omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
-				     OMAP_DMA_DATA_TYPE_S16,
-				     length >> 1, 1,
-				     OMAP_DMA_SYNC_ELEMENT,
-	 sync_dev, 0);
+					OMAP_DMA_DATA_TYPE_S16,
+					length >> 1, 1,
+					OMAP_DMA_SYNC_ELEMENT,
+					sync_dev, 0);
 
 	omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
 				src_port,
@@ -768,16 +716,17 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
 				0, 0);
 
 	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
-				 dest_port,
-				 OMAP_DMA_AMODE_POST_INC,
-				 buffer,
-				 0, 0);
+					dest_port,
+					OMAP_DMA_AMODE_POST_INC,
+					buffer,
+					0, 0);
 
 	omap_start_dma(mcbsp[id].dma_rx_lch);
 	wait_for_completion(&(mcbsp[id].rx_dma_completion));
+
 	return 0;
 }
-
+EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
 
 /*
  * SPI wrapper.
@@ -785,12 +734,15 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
  * this wrapper just need an omap_mcbsp_spi_cfg structure as an input.
  * Once this is done, you can call omap_mcbsp_start().
  */
-void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg)
+void omap_mcbsp_set_spi_mode(unsigned int id,
+				const struct omap_mcbsp_spi_cfg *spi_cfg)
 {
 	struct omap_mcbsp_reg_cfg mcbsp_cfg;
 
-	if (omap_mcbsp_check(id) < 0)
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
 		return;
+	}
 
 	memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
 
@@ -798,7 +750,7 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
 	mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0));
 	mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0));
 
-        /* Clock stop mode */
+	/* Clock stop mode */
 	if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY)
 		mcbsp_cfg.spcr1 |= (1 << 12);
 	else
@@ -827,13 +779,12 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
 
 	if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) {
 		mcbsp_cfg.pcr0 |= CLKXM;
-		mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div -1);
+		mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1);
 		mcbsp_cfg.pcr0 |= FSXM;
 		mcbsp_cfg.srgr2 &= ~FSGM;
 		mcbsp_cfg.xcr2 |= XDATDLY(1);
 		mcbsp_cfg.rcr2 |= RDATDLY(1);
-	}
-	else {
+	} else {
 		mcbsp_cfg.pcr0 &= ~CLKXM;
 		mcbsp_cfg.srgr1 |= CLKGDV(1);
 		mcbsp_cfg.pcr0 &= ~FSXM;
@@ -846,199 +797,99 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
 
 	omap_mcbsp_config(id, &mcbsp_cfg);
 }
-
+EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
 
 /*
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
  * 730 has only 2 McBSP, and both of them are MPU peripherals.
  */
-struct omap_mcbsp_info {
-	u32 virt_base;
-	u8 dma_rx_sync, dma_tx_sync;
-	u16 rx_irq, tx_irq;
-};
+static int __init omap_mcbsp_probe(struct platform_device *pdev)
+{
+	struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
+	int id = pdev->id - 1;
+	int ret = 0;
 
-#ifdef CONFIG_ARCH_OMAP730
-static const struct omap_mcbsp_info mcbsp_730[] = {
-	[0] = { .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
-		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
-		.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
-		.rx_irq = INT_730_McBSP1RX,
-		.tx_irq = INT_730_McBSP1TX },
-	[1] = { .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
-		.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
-		.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
-		.rx_irq = INT_730_McBSP2RX,
-		.tx_irq = INT_730_McBSP2TX },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static const struct omap_mcbsp_info mcbsp_1510[] = {
-	[0] = { .virt_base = OMAP1510_MCBSP1_BASE,
-		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
-		.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
-		.rx_irq = INT_McBSP1RX,
-		.tx_irq = INT_McBSP1TX },
-	[1] = { .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
-		.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
-		.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
-		.rx_irq = INT_1510_SPI_RX,
-		.tx_irq = INT_1510_SPI_TX },
-	[2] = { .virt_base = OMAP1510_MCBSP3_BASE,
-		.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
-		.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
-		.rx_irq = INT_McBSP3RX,
-		.tx_irq = INT_McBSP3TX },
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static const struct omap_mcbsp_info mcbsp_1610[] = {
-	[0] = { .virt_base = OMAP1610_MCBSP1_BASE,
-		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
-		.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
-		.rx_irq = INT_McBSP1RX,
-		.tx_irq = INT_McBSP1TX },
-	[1] = { .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
-		.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
-		.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
-		.rx_irq = INT_1610_McBSP2_RX,
-		.tx_irq = INT_1610_McBSP2_TX },
-	[2] = { .virt_base = OMAP1610_MCBSP3_BASE,
-		.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
-		.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
-		.rx_irq = INT_McBSP3RX,
-		.tx_irq = INT_McBSP3TX },
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-static const struct omap_mcbsp_info mcbsp_24xx[] = {
-	[0] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
-		.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
-		.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
-		.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
-		.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
-		},
-	[1] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
-		.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
-		.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
-		.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
-		.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
-		},
-};
-#endif
+	if (!pdata) {
+		dev_err(&pdev->dev, "McBSP device initialized without"
+				"platform data\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id);
+
+	if (id >= OMAP_MAX_MCBSP_COUNT) {
+		dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	spin_lock_init(&mcbsp[id].lock);
+	mcbsp[id].id = id + 1;
+	mcbsp[id].free = 1;
+	mcbsp[id].dma_tx_lch = -1;
+	mcbsp[id].dma_rx_lch = -1;
+
+	mcbsp[id].io_base = pdata->virt_base;
+	/* Default I/O is IRQ based */
+	mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
+	mcbsp[id].tx_irq = pdata->tx_irq;
+	mcbsp[id].rx_irq = pdata->rx_irq;
+	mcbsp[id].dma_rx_sync = pdata->dma_rx_sync;
+	mcbsp[id].dma_tx_sync = pdata->dma_tx_sync;
+
+	if (pdata->clk_name)
+		mcbsp[id].clk = clk_get(&pdev->dev, pdata->clk_name);
+	if (IS_ERR(mcbsp[id].clk)) {
+		mcbsp[id].free = 0;
+		dev_err(&pdev->dev,
+			"Invalid clock configuration for McBSP%d.\n",
+			mcbsp[id].id);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	mcbsp[id].pdata = pdata;
+	mcbsp[id].dev = &pdev->dev;
+	platform_set_drvdata(pdev, &mcbsp[id]);
+
+exit:
+	return ret;
+}
 
-static int __init omap_mcbsp_init(void)
+static int omap_mcbsp_remove(struct platform_device *pdev)
 {
-	int mcbsp_count = 0, i;
-	static const struct omap_mcbsp_info *mcbsp_info;
+	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
 
-	printk("Initializing OMAP McBSP system\n");
+	platform_set_drvdata(pdev, NULL);
+	if (mcbsp) {
 
-#ifdef CONFIG_ARCH_OMAP1
-	mcbsp_dsp_ck = clk_get(0, "dsp_ck");
-	if (IS_ERR(mcbsp_dsp_ck)) {
-		printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n");
-		return PTR_ERR(mcbsp_dsp_ck);
-	}
-	mcbsp_api_ck = clk_get(0, "api_ck");
-	if (IS_ERR(mcbsp_api_ck)) {
-		printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
-		return PTR_ERR(mcbsp_api_ck);
-	}
-	mcbsp_dspxor_ck = clk_get(0, "dspxor_ck");
-	if (IS_ERR(mcbsp_dspxor_ck)) {
-		printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n");
-		return PTR_ERR(mcbsp_dspxor_ck);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP2
-	mcbsp1_ick = clk_get(0, "mcbsp1_ick");
-	if (IS_ERR(mcbsp1_ick)) {
-		printk(KERN_ERR "mcbsp: could not acquire mcbsp1_ick handle.\n");
-		return PTR_ERR(mcbsp1_ick);
-	}
-	mcbsp1_fck = clk_get(0, "mcbsp1_fck");
-	if (IS_ERR(mcbsp1_fck)) {
-		printk(KERN_ERR "mcbsp: could not acquire mcbsp1_fck handle.\n");
-		return PTR_ERR(mcbsp1_fck);
-	}
-	mcbsp2_ick = clk_get(0, "mcbsp2_ick");
-	if (IS_ERR(mcbsp2_ick)) {
-		printk(KERN_ERR "mcbsp: could not acquire mcbsp2_ick handle.\n");
-		return PTR_ERR(mcbsp2_ick);
-	}
-	mcbsp2_fck = clk_get(0, "mcbsp2_fck");
-	if (IS_ERR(mcbsp2_fck)) {
-		printk(KERN_ERR "mcbsp: could not acquire mcbsp2_fck handle.\n");
-		return PTR_ERR(mcbsp2_fck);
-	}
-#endif
+		if (mcbsp->pdata && mcbsp->pdata->ops &&
+				mcbsp->pdata->ops->free)
+			mcbsp->pdata->ops->free(mcbsp->id);
 
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		mcbsp_info = mcbsp_730;
-		mcbsp_count = ARRAY_SIZE(mcbsp_730);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
-		mcbsp_info = mcbsp_1510;
-		mcbsp_count = ARRAY_SIZE(mcbsp_1510);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap16xx()) {
-		mcbsp_info = mcbsp_1610;
-		mcbsp_count = ARRAY_SIZE(mcbsp_1610);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX)
-	if (cpu_is_omap24xx()) {
-		mcbsp_info = mcbsp_24xx;
-		mcbsp_count = ARRAY_SIZE(mcbsp_24xx);
-		omap2_mcbsp2_mux_setup();
-	}
-#endif
-	for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) {
-		if (i >= mcbsp_count) {
-			mcbsp[i].io_base = 0;
-			mcbsp[i].free = 0;
-                        continue;
-		}
-		mcbsp[i].id = i + 1;
-		mcbsp[i].free = 1;
-		mcbsp[i].dma_tx_lch = -1;
-		mcbsp[i].dma_rx_lch = -1;
-
-		mcbsp[i].io_base = mcbsp_info[i].virt_base;
-		mcbsp[i].io_type = OMAP_MCBSP_IRQ_IO; /* Default I/O is IRQ based */
-		mcbsp[i].tx_irq = mcbsp_info[i].tx_irq;
-		mcbsp[i].rx_irq = mcbsp_info[i].rx_irq;
-		mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync;
-		mcbsp[i].dma_tx_sync = mcbsp_info[i].dma_tx_sync;
-		spin_lock_init(&mcbsp[i].lock);
+		clk_disable(mcbsp->clk);
+		clk_put(mcbsp->clk);
+
+		mcbsp->clk = NULL;
+		mcbsp->free = 0;
+		mcbsp->dev = NULL;
 	}
 
 	return 0;
 }
 
-arch_initcall(omap_mcbsp_init);
+static struct platform_driver omap_mcbsp_driver = {
+	.probe		= omap_mcbsp_probe,
+	.remove		= omap_mcbsp_remove,
+	.driver		= {
+		.name	= "omap-mcbsp",
+	},
+};
+
+int __init omap_mcbsp_init(void)
+{
+	/* Register the McBSP driver */
+	return platform_driver_register(&omap_mcbsp_driver);
+}
 
-EXPORT_SYMBOL(omap_mcbsp_config);
-EXPORT_SYMBOL(omap_mcbsp_request);
-EXPORT_SYMBOL(omap_mcbsp_set_io_type);
-EXPORT_SYMBOL(omap_mcbsp_free);
-EXPORT_SYMBOL(omap_mcbsp_start);
-EXPORT_SYMBOL(omap_mcbsp_stop);
-EXPORT_SYMBOL(omap_mcbsp_pollread);
-EXPORT_SYMBOL(omap_mcbsp_pollwrite);
-EXPORT_SYMBOL(omap_mcbsp_xmit_word);
-EXPORT_SYMBOL(omap_mcbsp_recv_word);
-EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
-EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
-EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
-EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
-EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 1f23f0459e5f..554ee58e1294 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -10,6 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#undef DEBUG
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -24,25 +25,43 @@
 #include <asm/arch/sram.h>
 #include <asm/arch/board.h>
 
+#include <asm/arch/control.h>
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+# include "../mach-omap2/prm.h"
+# include "../mach-omap2/cm.h"
+# include "../mach-omap2/sdrc.h"
+#endif
+
 #define OMAP1_SRAM_PA		0x20000000
-#define OMAP1_SRAM_VA		0xd0000000
+#define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		0xd0000000
-#define OMAP2_SRAM_PUB_VA	0xd0000800
-
-#if defined(CONFIG_ARCH_OMAP24XX)
+#define OMAP2_SRAM_VA		VMALLOC_END
+#define OMAP2_SRAM_PUB_VA	(VMALLOC_END + 0x800)
+#define OMAP3_SRAM_PA           0x40200000
+#define OMAP3_SRAM_VA           0xd7000000
+#define OMAP3_SRAM_PUB_PA       0x40208000
+#define OMAP3_SRAM_PUB_VA       0xd7008000
+
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
 #else
 #define SRAM_BOOTLOADER_SZ	0x80
 #endif
 
-#define VA_REQINFOPERM0		IO_ADDRESS(0x68005048)
-#define VA_READPERM0		IO_ADDRESS(0x68005050)
-#define VA_WRITEPERM0		IO_ADDRESS(0x68005058)
-#define VA_CONTROL_STAT		IO_ADDRESS(0x480002F8)
+#define OMAP24XX_VA_REQINFOPERM0	IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0	IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT	IO_ADDRESS(0x480022F0)
+
 #define GP_DEVICE		0x300
-#define TYPE_MASK		0x700
 
 #define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
 
@@ -68,14 +87,21 @@ static int is_sram_locked(void)
 	int type = 0;
 
 	if (cpu_is_omap242x())
-		type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK;
+		type = system_rev & OMAP2_DEVICETYPE_MASK;
 
 	if (type == GP_DEVICE) {
 		/* RAMFW: R/W access to all initiators for all qualifier sets */
 		if (cpu_is_omap242x()) {
-			__raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */
-			__raw_writel(0xCFDE, VA_READPERM0);  /* all i-read */
-			__raw_writel(0xCFDE, VA_WRITEPERM0); /* all i-write */
+			__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+			__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
+			__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+		}
+		if (cpu_is_omap34xx()) {
+			__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+			__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
+			__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+			__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
+			__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
 		}
 		return 0;
 	} else
@@ -92,18 +118,30 @@ void __init omap_detect_sram(void)
 {
 	unsigned long reserved;
 
-	if (cpu_is_omap24xx()) {
+	if (cpu_class_is_omap2()) {
 		if (is_sram_locked()) {
-			omap_sram_base = OMAP2_SRAM_PUB_VA;
-			omap_sram_start = OMAP2_SRAM_PUB_PA;
-			omap_sram_size = 0x800; /* 2K */
+			if (cpu_is_omap34xx()) {
+				omap_sram_base = OMAP3_SRAM_PUB_VA;
+				omap_sram_start = OMAP3_SRAM_PUB_PA;
+				omap_sram_size = 0x8000; /* 32K */
+			} else {
+				omap_sram_base = OMAP2_SRAM_PUB_VA;
+				omap_sram_start = OMAP2_SRAM_PUB_PA;
+				omap_sram_size = 0x800; /* 2K */
+			}
 		} else {
-			omap_sram_base = OMAP2_SRAM_VA;
-			omap_sram_start = OMAP2_SRAM_PA;
-			if (cpu_is_omap242x())
-				omap_sram_size = 0xa0000; /* 640K */
-			else if (cpu_is_omap243x())
+			if (cpu_is_omap34xx()) {
+				omap_sram_base = OMAP3_SRAM_VA;
+				omap_sram_start = OMAP3_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
+			} else {
+				omap_sram_base = OMAP2_SRAM_VA;
+				omap_sram_start = OMAP2_SRAM_PA;
+				if (cpu_is_omap242x())
+					omap_sram_size = 0xa0000; /* 640K */
+				else if (cpu_is_omap243x())
+					omap_sram_size = 0x10000; /* 64K */
+			}
 		}
 	} else {
 		omap_sram_base = OMAP1_SRAM_VA;
@@ -157,6 +195,13 @@ void __init omap_map_sram(void)
 		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
 	}
 
+	if (cpu_is_omap34xx()) {
+		omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
+		base = OMAP3_SRAM_PA;
+		base = ROUND_DOWN(base, PAGE_SIZE);
+		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	}
+
 	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
@@ -191,6 +236,7 @@ void * omap_sram_push(void * start, unsigned long size)
 	omap_sram_ceil -= size;
 	omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
 	memcpy((void *)omap_sram_ceil, start, size);
+	flush_icache_range((unsigned long)start, (unsigned long)(start + size));
 
 	return (void *)omap_sram_ceil;
 }
@@ -214,8 +260,9 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 
 int __init omap1_sram_init(void)
 {
-	_omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
-						    sram_reprogram_clock_sz);
+	_omap_sram_reprogram_clock =
+			omap_sram_push(omap1_sram_reprogram_clock,
+					omap1_sram_reprogram_clock_sz);
 
 	return 0;
 }
@@ -224,7 +271,7 @@ int __init omap1_sram_init(void)
 #define omap1_sram_init()	do {} while (0)
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
 static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 			      u32 base_cs, u32 force_unlock);
@@ -259,19 +306,109 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 
 	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
 }
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+int __init omap242x_sram_init(void)
+{
+	_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+					omap242x_sram_ddr_init_sz);
+
+	_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+					    omap242x_sram_reprogram_sdrc_sz);
+
+	_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+					 omap242x_sram_set_prcm_sz);
+
+	return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+int __init omap243x_sram_init(void)
+{
+	_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+					omap243x_sram_ddr_init_sz);
+
+	_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+					    omap243x_sram_reprogram_sdrc_sz);
+
+	_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+					 omap243x_sram_set_prcm_sz);
+
+	return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
+u32 omap2_sram_reprogram_gpmc(u32 perf_level)
+{
+	if (!_omap2_sram_reprogram_gpmc)
+		omap_sram_error();
+
+	return _omap2_sram_reprogram_gpmc(perf_level);
+}
+
+static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
+						u32 freqsel, u32 m2);
+u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
+{
+	if (!_omap2_sram_configure_core_dpll)
+		omap_sram_error();
+
+	return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+}
 
-int __init omap2_sram_init(void)
+/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
+void restore_sram_functions(void)
 {
-	_omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz);
+	omap_sram_ceil = omap_sram_base + omap_sram_size;
 
-	_omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc,
-						    sram_reprogram_sdrc_sz);
-	_omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz);
+	_omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+		omap34xx_sram_reprogram_gpmc_sz);
+
+	_omap2_sram_configure_core_dpll =
+			omap_sram_push(omap34xx_sram_configure_core_dpll,
+					omap34xx_sram_configure_core_dpll_sz);
+}
+
+int __init omap34xx_sram_init(void)
+{
+	_omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
+					omap34xx_sram_ddr_init_sz);
+
+	_omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
+					omap34xx_sram_reprogram_sdrc_sz);
+
+	_omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
+					omap34xx_sram_set_prcm_sz);
+
+	_omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+					omap34xx_sram_reprogram_gpmc_sz);
+
+	_omap2_sram_configure_core_dpll =
+				omap_sram_push(omap34xx_sram_configure_core_dpll,
+					omap34xx_sram_configure_core_dpll_sz);
 
 	return 0;
 }
 #else
-#define omap2_sram_init()	do {} while (0)
+static inline int omap34xx_sram_init(void)
+{
+	return 0;
+}
 #endif
 
 int __init omap_sram_init(void)
@@ -279,10 +416,14 @@ int __init omap_sram_init(void)
 	omap_detect_sram();
 	omap_map_sram();
 
-	if (!cpu_is_omap24xx())
+	if (!(cpu_class_is_omap2()))
 		omap1_sram_init();
-	else
-		omap2_sram_init();
+	else if (cpu_is_omap242x())
+		omap242x_sram_init();
+	else if (cpu_is_omap2430())
+		omap243x_sram_init();
+	else if (cpu_is_omap34xx())
+		omap34xx_sram_init();
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index a619475c4b76..2699c16d4da0 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -1,4 +1,4 @@
-/*
+ /*
  * arch/arm/plat-omap/usb.c -- platform level USB initialization
  *
  * Copyright (C) 2004 Texas Instruments, Inc.
@@ -156,8 +156,12 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 
 	if (nwires == 0) {
 		if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+			u32 l;
+
 			/* pulldown D+/D- */
-			USB_TRANSCEIVER_CTRL_REG &= ~(3 << 1);
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
 		}
 		return 0;
 	}
@@ -171,6 +175,8 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 
 	/* internal transceiver (unavailable on 17xx, 24xx) */
 	if (!cpu_class_is_omap2() && nwires == 2) {
+		u32 l;
+
 		// omap_cfg_reg(P9_USB_DP);
 		// omap_cfg_reg(R8_USB_DM);
 
@@ -185,9 +191,11 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 		 *  - OTG support on this port not yet written
 		 */
 
-		USB_TRANSCEIVER_CTRL_REG &= ~(7 << 4);
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~(7 << 4);
 		if (!is_device)
-			USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+			l |= (3 << 1);
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
 
 		return 3 << 16;
 	}
@@ -217,8 +225,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 	 * with VBUS switching and overcurrent detection.
 	 */
 
-	if (cpu_class_is_omap1() && nwires != 6)
-		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
+	if (cpu_class_is_omap1() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
 
 	switch (nwires) {
 	case 3:
@@ -238,9 +251,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 			omap_cfg_reg(K20_24XX_USB0_VM);
 			omap2_usb_devconf_set(0, USB_UNIDIR);
 		} else {
+			u32 l;
+
 			omap_cfg_reg(AA9_USB0_VP);
 			omap_cfg_reg(R9_USB0_VM);
-			USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
 		}
 		break;
 	default:
@@ -254,8 +271,13 @@ static u32 __init omap_usb1_init(unsigned nwires)
 {
 	u32	syscon1 = 0;
 
-	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
-		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
+	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB1_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
 	if (cpu_is_omap24xx())
 		omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
 
@@ -316,8 +338,13 @@ static u32 __init omap_usb1_init(unsigned nwires)
 		syscon1 = 3;
 		omap_cfg_reg(USB1_VP);
 		omap_cfg_reg(USB1_VM);
-		if (!cpu_is_omap15xx())
-			USB_TRANSCEIVER_CTRL_REG |= CONF_USB1_UNI_R;
+		if (!cpu_is_omap15xx()) {
+			u32 l;
+
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB1_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
 		break;
 	default:
 bad:
@@ -340,8 +367,13 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 	if (alt_pingroup || nwires == 0)
 		return 0;
 
-	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
-		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
+	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
 
 	/* external transceiver */
 	if (cpu_is_omap15xx()) {
@@ -410,9 +442,13 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 			omap_cfg_reg(USB2_VP);
 			omap_cfg_reg(USB2_VM);
 		} else {
+			u32 l;
+
 			omap_cfg_reg(AA9_USB2_VP);
 			omap_cfg_reg(R9_USB2_VM);
-			USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
 		}
 		break;
 	default:
@@ -531,10 +567,6 @@ static struct platform_device otg_device = {
 
 /*-------------------------------------------------------------------------*/
 
-#define ULPD_CLOCK_CTRL_REG	__REG16(ULPD_CLOCK_CTRL)
-#define ULPD_SOFT_REQ_REG	__REG16(ULPD_SOFT_REQ)
-
-
 // FIXME correct answer depends on hmc_mode,
 // as does (on omap1) any nonzero value for config->otg port number
 #ifdef	CONFIG_USB_GADGET_OMAP
@@ -550,17 +582,17 @@ static struct platform_device otg_device = {
 void __init
 omap_otg_init(struct omap_usb_config *config)
 {
-	u32		syscon = OTG_SYSCON_1_REG & 0xffff;
+	u32		syscon;
 	int		status;
 	int		alt_pingroup = 0;
 
 	/* NOTE:  no bus or clock setup (yet?) */
 
-	syscon = OTG_SYSCON_1_REG & 0xffff;
+	syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
 	if (!(syscon & OTG_RESET_DONE))
 		pr_debug("USB resets not complete?\n");
 
-	// OTG_IRQ_EN_REG = 0;
+	//omap_writew(0, OTG_IRQ_EN);
 
 	/* pin muxing and transceiver pinouts */
 	if (config->pins[0] > 2)	/* alt pingroup 2 */
@@ -568,8 +600,8 @@ omap_otg_init(struct omap_usb_config *config)
 	syscon |= omap_usb0_init(config->pins[0], is_usb0_device(config));
 	syscon |= omap_usb1_init(config->pins[1]);
 	syscon |= omap_usb2_init(config->pins[2], alt_pingroup);
-	pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
-	OTG_SYSCON_1_REG = syscon;
+	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+	omap_writel(syscon, OTG_SYSCON_1);
 
 	syscon = config->hmc_mode;
 	syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
@@ -578,9 +610,10 @@ omap_otg_init(struct omap_usb_config *config)
 		syscon |= OTG_EN;
 #endif
 	if (cpu_class_is_omap1())
-		pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG);
-	pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon);
-	OTG_SYSCON_2_REG = syscon;
+		pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+			 omap_readl(USB_TRANSCEIVER_CTRL));
+	pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
+	omap_writel(syscon, OTG_SYSCON_2);
 
 	printk("USB: hmc %d", config->hmc_mode);
 	if (!alt_pingroup)
@@ -597,12 +630,19 @@ omap_otg_init(struct omap_usb_config *config)
 	printk("\n");
 
 	if (cpu_class_is_omap1()) {
+		u16 w;
+
 		/* leave USB clocks/controllers off until needed */
-		ULPD_SOFT_REQ_REG &= ~SOFT_USB_CLK_REQ;
-		ULPD_CLOCK_CTRL_REG &= ~USB_MCLK_EN;
-		ULPD_CLOCK_CTRL_REG |= DIS_USB_PVCI_CLK;
+		w = omap_readw(ULPD_SOFT_REQ);
+		w &= ~SOFT_USB_CLK_REQ;
+		omap_writew(w, ULPD_SOFT_REQ);
+
+		w = omap_readw(ULPD_CLOCK_CTRL);
+		w &= ~USB_MCLK_EN;
+		w |= DIS_USB_PVCI_CLK;
+		omap_writew(w, ULPD_CLOCK_CTRL);
 	}
-	syscon = OTG_SYSCON_1_REG;
+	syscon = omap_readl(OTG_SYSCON_1);
 	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
 
 #ifdef	CONFIG_USB_GADGET_OMAP
@@ -639,8 +679,8 @@ omap_otg_init(struct omap_usb_config *config)
 			pr_debug("can't register OTG device, %d\n", status);
 	}
 #endif
-	pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
-	OTG_SYSCON_1_REG = syscon;
+	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+	omap_writel(syscon, OTG_SYSCON_1);
 
 	status = 0;
 }
@@ -653,18 +693,19 @@ static inline void omap_otg_init(struct omap_usb_config *config) {}
 
 #ifdef	CONFIG_ARCH_OMAP15XX
 
-#define ULPD_DPLL_CTRL_REG	__REG16(ULPD_DPLL_CTRL)
+/* ULPD_DPLL_CTRL */
 #define DPLL_IOB		(1 << 13)
 #define DPLL_PLL_ENABLE		(1 << 4)
 #define DPLL_LOCK		(1 << 0)
 
-#define ULPD_APLL_CTRL_REG	__REG16(ULPD_APLL_CTRL)
+/* ULPD_APLL_CTRL */
 #define APLL_NDPLL_SWITCH	(1 << 0)
 
 
 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 {
 	unsigned int val;
+	u16 w;
 
 	omap_usb0_init(config->pins[0], is_usb0_device(config));
 	omap_usb1_init(config->pins[1]);
@@ -685,12 +726,22 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 	printk("\n");
 
 	/* use DPLL for 48 MHz function clock */
-	pr_debug("APLL %04x DPLL %04x REQ %04x\n", ULPD_APLL_CTRL_REG,
-			ULPD_DPLL_CTRL_REG, ULPD_SOFT_REQ_REG);
-	ULPD_APLL_CTRL_REG &= ~APLL_NDPLL_SWITCH;
-	ULPD_DPLL_CTRL_REG |= DPLL_IOB | DPLL_PLL_ENABLE;
-	ULPD_SOFT_REQ_REG |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
-	while (!(ULPD_DPLL_CTRL_REG & DPLL_LOCK))
+	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
+			omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
+
+	w = omap_readw(ULPD_APLL_CTRL);
+	w &= ~APLL_NDPLL_SWITCH;
+	omap_writew(w, ULPD_APLL_CTRL);
+
+	w = omap_readw(ULPD_DPLL_CTRL);
+	w |= DPLL_IOB | DPLL_PLL_ENABLE;
+	omap_writew(w, ULPD_DPLL_CTRL);
+
+	w = omap_readw(ULPD_SOFT_REQ);
+	w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
+	omap_writew(w, ULPD_SOFT_REQ);
+
+	while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
 		cpu_relax();
 
 #ifdef	CONFIG_USB_GADGET_OMAP
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index c5b669d234bc..fe66a1835169 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -36,8 +36,8 @@ static void orion_irq_unmask(u32 irq)
 
 static struct irq_chip orion_irq_chip = {
 	.name		= "orion_irq",
-	.ack		= orion_irq_mask,
 	.mask		= orion_irq_mask,
+	.mask_ack	= orion_irq_mask,
 	.unmask		= orion_irq_unmask,
 };
 
@@ -59,6 +59,7 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
 		set_irq_chip(irq, &orion_irq_chip);
 		set_irq_chip_data(irq, maskaddr);
 		set_irq_handler(irq, handle_level_irq);
+		irq_desc[irq].status |= IRQ_LEVEL;
 		set_irq_flags(irq, IRQF_VALID);
 	}
 }
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index abfda53f1800..ca32c60e14d7 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -39,6 +39,7 @@
 #define PCIE_CONF_DATA_OFF	0x18fc
 #define PCIE_MASK_OFF		0x1910
 #define PCIE_CTRL_OFF		0x1a00
+#define  PCIE_CTRL_X1_MODE		0x0001
 #define PCIE_STAT_OFF		0x1a04
 #define  PCIE_STAT_DEV_OFFS		20
 #define  PCIE_STAT_DEV_MASK		0x1f
@@ -62,6 +63,11 @@ int orion_pcie_link_up(void __iomem *base)
 	return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
 }
 
+int __init orion_pcie_x4_mode(void __iomem *base)
+{
+	return !(readl(base + PCIE_CTRL_OFF) & PCIE_CTRL_X1_MODE);
+}
+
 int orion_pcie_get_local_bus_nr(void __iomem *base)
 {
 	u32 stat = readl(base + PCIE_STAT_OFF);
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 28b5285446e8..93c4ef9f0067 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -74,7 +74,7 @@ orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
 	/*
 	 * Clear and enable clockevent timer interrupt.
 	 */
-	writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+	writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
 
 	u = readl(BRIDGE_MASK);
 	u |= BRIDGE_INT_TIMER1;
@@ -138,7 +138,7 @@ orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 		/*
 		 * ACK pending timer interrupt.
 		 */
-		writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+		writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
 
 	}
 	local_irq_restore(flags);
@@ -159,7 +159,7 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
 	/*
 	 * ACK timer interrupt and call event handler.
 	 */
-	writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+	writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
 	orion_clkevt.event_handler(&orion_clkevt);
 
 	return IRQ_HANDLED;
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index b66fb3c4e228..5e28c217b8c2 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,6 +9,7 @@ config PLAT_S3C24XX
 	depends on ARCH_S3C2410
 	default y if ARCH_S3C2410
 	select NO_IOPORT
+	select HAVE_GPIO_LIB
 	help
 	  Base platform code for any Samsung S3C24XX device
 
@@ -20,6 +21,13 @@ config CPU_S3C244X
 	help
 	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C24XX_PWM
+	bool "PWM device support"
+	select HAVE_PWM
+	help
+	  Support for exporting the PWM timer blocks via the pwm device
+	  system.
+
 config PM_SIMTEC
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 131d20237dd7..d82767b2b833 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -16,8 +16,10 @@ obj-y				+= cpu.o
 obj-y				+= irq.o
 obj-y				+= devs.o
 obj-y				+= gpio.o
+obj-y				+= gpiolib.o
 obj-y				+= time.o
 obj-y				+= clock.o
+obj-y				+= pwm-clock.o
 
 # Architecture dependant builds
 
@@ -27,5 +29,6 @@ obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index e546e933b3f7..eea3b32ff798 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -495,106 +495,6 @@ struct platform_device s3c_device_spi1 = {
 
 EXPORT_SYMBOL(s3c_device_spi1);
 
-/* pwm timer blocks */
-
-static struct resource s3c_timer0_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_TIMER + 0x0C,
-		.end   = S3C24XX_PA_TIMER + 0x0C + 0xB,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TIMER0,
-		.end   = IRQ_TIMER0,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_timer0 = {
-	.name		  = "s3c2410-timer",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c_timer0_resource),
-	.resource	  = s3c_timer0_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer0);
-
-/* timer 1 */
-
-static struct resource s3c_timer1_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_TIMER + 0x18,
-		.end   = S3C24XX_PA_TIMER + 0x23,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TIMER1,
-		.end   = IRQ_TIMER1,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_timer1 = {
-	.name		  = "s3c2410-timer",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c_timer1_resource),
-	.resource	  = s3c_timer1_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer1);
-
-/* timer 2 */
-
-static struct resource s3c_timer2_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_TIMER + 0x24,
-		.end   = S3C24XX_PA_TIMER + 0x2F,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TIMER2,
-		.end   = IRQ_TIMER2,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_timer2 = {
-	.name		  = "s3c2410-timer",
-	.id		  = 2,
-	.num_resources	  = ARRAY_SIZE(s3c_timer2_resource),
-	.resource	  = s3c_timer2_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer2);
-
-/* timer 3 */
-
-static struct resource s3c_timer3_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_TIMER + 0x30,
-		.end   = S3C24XX_PA_TIMER + 0x3B,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TIMER3,
-		.end   = IRQ_TIMER3,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_timer3 = {
-	.name		  = "s3c2410-timer",
-	.id		  = 3,
-	.num_resources	  = ARRAY_SIZE(s3c_timer3_resource),
-	.resource	  = s3c_timer3_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer3);
-
 #ifdef CONFIG_CPU_S3C2440
 
 /* Camif Controller */
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 60f162dc4fad..8c5e656d5d8c 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1304,7 +1304,7 @@ struct sysdev_class dma_sysclass = {
 
 /* kmem cache implementation */
 
-static void s3c2410_dma_cache_ctor(struct kmem_cache *c, void *p)
+static void s3c2410_dma_cache_ctor(void *p)
 {
 	memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
new file mode 100644
index 000000000000..825d8d0c5ca2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -0,0 +1,259 @@
+/* linux/arch/arm/plat-s3c24xx/gpiolib.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-gpio.h>
+
+struct s3c24xx_gpio_chip {
+	struct gpio_chip	chip;
+	void __iomem		*base;
+};
+
+static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct s3c24xx_gpio_chip, chip);
+}
+
+/* these routines are exported for use by other parts of the platform
+ * and system support, but are not intended to be used directly by the
+ * drivers themsevles.
+ */
+
+int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+int s3c24xx_gpiolib_output(struct gpio_chip *chip,
+				  unsigned offset, int value)
+{
+	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+}
+
+int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+	return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	dat = __raw_readl(base + 0x04);
+
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+
+	__raw_writel(dat, base + 0x04);
+
+	con &= ~(1 << offset);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+
+struct s3c24xx_gpio_chip gpios[] = {
+	[0] = {
+		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
+		.chip	= {
+			.base			= S3C2410_GPA0,
+			.owner			= THIS_MODULE,
+			.label			= "GPIOA",
+			.ngpio			= 24,
+			.direction_input	= s3c24xx_gpiolib_banka_input,
+			.direction_output	= s3c24xx_gpiolib_banka_output,
+			.set			= s3c24xx_gpiolib_set,
+			.get			= s3c24xx_gpiolib_get,
+		},
+	},
+	[1] = {
+		.base	= S3C24XX_GPIO_BASE(S3C2410_GPB0),
+		.chip	= {
+			.base			= S3C2410_GPB0,
+			.owner			= THIS_MODULE,
+			.label			= "GPIOB",
+			.ngpio			= 16,
+			.direction_input	= s3c24xx_gpiolib_input,
+			.direction_output	= s3c24xx_gpiolib_output,
+			.set			= s3c24xx_gpiolib_set,
+			.get			= s3c24xx_gpiolib_get,
+		},
+	},
+	[2] = {
+		.base	= S3C24XX_GPIO_BASE(S3C2410_GPC0),
+		.chip	= {
+			.base			= S3C2410_GPC0,
+			.owner			= THIS_MODULE,
+			.label			= "GPIOC",
+			.ngpio			= 16,
+			.direction_input	= s3c24xx_gpiolib_input,
+			.direction_output	= s3c24xx_gpiolib_output,
+			.set			= s3c24xx_gpiolib_set,
+			.get			= s3c24xx_gpiolib_get,
+		},
+	},
+	[3] = {
+		.base	= S3C24XX_GPIO_BASE(S3C2410_GPD0),
+		.chip	= {
+			.base			= S3C2410_GPD0,
+			.owner			= THIS_MODULE,
+			.label			= "GPIOD",
+			.ngpio			= 16,
+			.direction_input	= s3c24xx_gpiolib_input,
+			.direction_output	= s3c24xx_gpiolib_output,
+			.set			= s3c24xx_gpiolib_set,
+			.get			= s3c24xx_gpiolib_get,
+		},
+	},
+	[4] = {
+		.base	= S3C24XX_GPIO_BASE(S3C2410_GPE0),
+		.chip	= {
+			.base			= S3C2410_GPE0,
+			.label			= "GPIOE",
+			.owner			= THIS_MODULE,
+			.ngpio			= 16,
+			.direction_input	= s3c24xx_gpiolib_input,
+			.direction_output	= s3c24xx_gpiolib_output,
+			.set			= s3c24xx_gpiolib_set,
+			.get			= s3c24xx_gpiolib_get,
+		},
+	},
+	[5] = {
+		.base	= S3C24XX_GPIO_BASE(S3C2410_GPF0),
+		.chip	= {
+			.base			= S3C2410_GPF0,
+			.owner			= THIS_MODULE,
+			.label			= "GPIOF",
+			.ngpio			= 8,
+			.direction_input	= s3c24xx_gpiolib_input,
+			.direction_output	= s3c24xx_gpiolib_output,
+			.set			= s3c24xx_gpiolib_set,
+			.get			= s3c24xx_gpiolib_get,
+		},
+	},
+	[6] = {
+		.base	= S3C24XX_GPIO_BASE(S3C2410_GPG0),
+		.chip	= {
+			.base			= S3C2410_GPG0,
+			.owner			= THIS_MODULE,
+			.label			= "GPIOG",
+			.ngpio			= 10,
+			.direction_input	= s3c24xx_gpiolib_input,
+			.direction_output	= s3c24xx_gpiolib_output,
+			.set			= s3c24xx_gpiolib_set,
+			.get			= s3c24xx_gpiolib_get,
+		},
+	},
+};
+
+static __init int s3c24xx_gpiolib_init(void)
+{
+	struct s3c24xx_gpio_chip *chip = gpios;
+	int gpn;
+
+	for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++)
+		gpiochip_add(&chip->chip);
+
+	return 0;
+}
+
+arch_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
new file mode 100644
index 000000000000..2cda3e3c6786
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -0,0 +1,437 @@
+/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2008 Ben Dooks
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c/regs-timer.h>
+
+/* Each of the timers 0 through 5 go through the following
+ * clock tree, with the inputs depending on the timers.
+ *
+ * pclk ---- [ prescaler 0 ] -+---> timer 0
+ *			      +---> timer 1
+ *
+ * pclk ---- [ prescaler 1 ] -+---> timer 2
+ *			      +---> timer 3
+ *			      \---> timer 4
+ *
+ * Which are fed into the timers as so:
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 0
+ * tclk 0 ------------------------------/
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 1
+ * tclk 0 ------------------------------/
+ *
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 2
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 3
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
+ *				       [mux] -> timer 4
+ * tclk 1 ------------------------------/
+ *
+ * Since the mux and the divider are tied together in the
+ * same register space, it is impossible to set the parent
+ * and the rate at the same time. To avoid this, we add an
+ * intermediate 'prescaled-and-divided' clock to select
+ * as the parent for the timer input clock called tdiv.
+ *
+ * prescaled clk --> pwm-tdiv ---\
+ *                             [ mux ] --> timer X
+ * tclk -------------------------/
+*/
+
+static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
+{
+	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+	if (clk->id == 1) {
+		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
+		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
+	} else {
+		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
+	}
+
+	return clk_get_rate(clk->parent) / (tcfg0 + 1);
+}
+
+/* TODO - add set rate calls. */
+
+struct clk clk_timer_scaler[] = {
+	[0]	= {
+		.name		= "pwm-scaler0",
+		.id		= -1,
+		.get_rate	= clk_pwm_scaler_getrate,
+	},
+	[1]	= {
+		.name		= "pwm-scaler1",
+		.id		= -1,
+		.get_rate	= clk_pwm_scaler_getrate,
+	},
+};
+
+struct clk clk_timer_tclk[] = {
+	[0]	= {
+		.name		= "pwm-tclk0",
+		.id		= -1,
+	},
+	[1]	= {
+		.name		= "pwm-tclk1",
+		.id		= -1,
+	},
+};
+
+struct pwm_tdiv_clk {
+	struct clk	clk;
+	unsigned int	divisor;
+};
+
+static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
+{
+	return container_of(clk, struct pwm_tdiv_clk, clk);
+}
+
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << (1 + tcfg1);
+}
+
+static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned int divisor;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+		divisor = to_tdiv(clk)->divisor;
+	else
+		divisor = tcfg_to_divisor(tcfg1);
+
+	return clk_get_rate(clk->parent) / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	unsigned long parent_rate;
+	unsigned long divisor;
+
+	parent_rate = clk_get_rate(clk->parent);
+	divisor = parent_rate / rate;
+
+	if (divisor <= 2)
+		divisor = 2;
+	else if (divisor <= 4)
+		divisor = 4;
+	else if (divisor <= 8)
+		divisor = 8;
+	else
+		divisor = 16;
+
+	return parent_rate / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
+{
+	unsigned long bits;
+
+	switch (divclk->divisor) {
+	case 2:
+		bits = S3C2410_TCFG1_MUX_DIV2;
+		break;
+	case 4:
+		bits = S3C2410_TCFG1_MUX_DIV4;
+		break;
+	case 8:
+		bits = S3C2410_TCFG1_MUX_DIV8;
+		break;
+	case 16:
+	default:
+		bits = S3C2410_TCFG1_MUX_DIV16;
+		break;
+	}
+
+	return bits;
+}
+
+static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned long bits = clk_pwm_tdiv_bits(divclk);
+	unsigned long flags;
+	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
+
+	local_irq_save(flags);
+
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+	tcfg1 |= bits << shift;
+	__raw_writel(tcfg1, S3C2410_TCFG1);
+
+	local_irq_restore(flags);
+}
+
+static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long divisor;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	rate = clk_round_rate(clk, rate);
+	divisor = parent_rate / rate;
+
+	if (divisor > 16)
+		return -EINVAL;
+
+	divclk->divisor = divisor;
+
+	/* Update the current MUX settings if we are currently
+	 * selected as the clock source for this clock. */
+
+	if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
+		clk_pwm_tdiv_update(divclk);
+
+	return 0;
+}
+
+struct pwm_tdiv_clk clk_timer_tdiv[] = {
+	[0]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[0],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		},
+	},
+	[1]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[0],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		}
+	},
+	[2]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[1],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		},
+	},
+	[3]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[1],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		},
+	},
+	[4]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[1],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		},
+	},
+};
+
+static int __init clk_pwm_tdiv_register(unsigned int id)
+{
+	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	divclk->clk.id = id;
+	divclk->divisor = tcfg_to_divisor(tcfg1);
+
+	return s3c24xx_register_clock(&divclk->clk);
+}
+
+static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
+{
+	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
+}
+
+static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
+{
+	return &clk_timer_tdiv[id].clk;
+}
+
+static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned int id = clk->id;
+	unsigned long tcfg1;
+	unsigned long flags;
+	unsigned long bits;
+	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
+
+	if (parent == s3c24xx_pwmclk_tclk(id))
+		bits = S3C2410_TCFG1_MUX_TCLK << shift;
+	else if (parent == s3c24xx_pwmclk_tdiv(id))
+		bits = clk_pwm_tdiv_bits(to_tdiv(clk)) << shift;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	local_irq_save(flags);
+
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static struct clk clk_tin[] = {
+	[0]	= {
+		.name		= "pwm-tin",
+		.id		= 0,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+	[1]	= {
+		.name		= "pwm-tin",
+		.id		= 1,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+	[2]	= {
+		.name		= "pwm-tin",
+		.id		= 2,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+	[3]	= {
+		.name		= "pwm-tin",
+		.id		= 3,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+	[4]	= {
+		.name		= "pwm-tin",
+		.id		= 4,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+};
+
+static __init int clk_pwm_tin_register(struct clk *pwm)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned int id = pwm->id;
+
+	struct clk *parent;
+	int ret;
+
+	ret = s3c24xx_register_clock(pwm);
+	if (ret < 0)
+		return ret;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+		parent = s3c24xx_pwmclk_tclk(id);
+	else
+		parent = s3c24xx_pwmclk_tdiv(id);
+
+	return clk_set_parent(pwm, parent);
+}
+
+static __init int s3c24xx_pwmclk_init(void)
+{
+	struct clk *clk_timers;
+	unsigned int clk;
+	int ret;
+
+	clk_timers = clk_get(NULL, "timers");
+	if (IS_ERR(clk_timers)) {
+		printk(KERN_ERR "%s: no parent clock\n", __func__);
+		return -EINVAL;
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
+		clk_timer_scaler[clk].parent = clk_timers;
+		ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
+			goto err;
+		}
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
+		ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pww tclk%d\n", clk);
+			goto err;
+		}
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
+		ret = clk_pwm_tdiv_register(clk);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
+			goto err;
+		}
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
+		ret = clk_pwm_tin_register(&clk_tin[clk]);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
+			goto err;
+		}
+	}
+
+	return 0;
+
+ err:
+	return ret;
+}
+
+arch_initcall(s3c24xx_pwmclk_init);
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
new file mode 100644
index 000000000000..18c4bdc49a05
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -0,0 +1,402 @@
+/* arch/arm/plat-s3c24xx/pwm.c
+ *
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C24XX PWM device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/plat-s3c/regs-timer.h>
+
+struct pwm_device {
+	struct list_head	 list;
+	struct platform_device	*pdev;
+
+	struct clk		*clk_div;
+	struct clk		*clk;
+	const char		*label;
+
+	unsigned int		 period_ns;
+	unsigned int		 duty_ns;
+
+	unsigned char		 tcon_base;
+	unsigned char		 running;
+	unsigned char		 use_count;
+	unsigned char		 pwm_id;
+};
+
+#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg)
+
+static struct clk *clk_scaler[2];
+
+/* Standard setup for a timer block. */
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq)			\
+	(struct resource [TIMER_RESOURCE_SIZE]) {	\
+		[0] = {					\
+			.start	= _irq,			\
+			.end	= _irq,			\
+			.flags	= IORESOURCE_IRQ	\
+		}					\
+	}
+
+#define DEFINE_TIMER(_tmr_no, _irq)			\
+	.name		= "s3c24xx-pwm",		\
+	.id		= _tmr_no,			\
+	.num_resources	= TIMER_RESOURCE_SIZE,		\
+	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
+
+/* since we already have an static mapping for the timer, we do not
+ * bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+	[0] = { DEFINE_TIMER(0, IRQ_TIMER0) },
+	[1] = { DEFINE_TIMER(1, IRQ_TIMER1) },
+	[2] = { DEFINE_TIMER(2, IRQ_TIMER2) },
+	[3] = { DEFINE_TIMER(3, IRQ_TIMER3) },
+	[4] = { DEFINE_TIMER(4, IRQ_TIMER4) },
+};
+
+static inline int pwm_is_tdiv(struct pwm_device *pwm)
+{
+	return clk_get_parent(pwm->clk) == pwm->clk_div;
+}
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, list) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count = 1;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+
+EXPORT_SYMBOL(pwm_request);
+
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
+
+	mutex_unlock(&pwm_lock);
+}
+
+EXPORT_SYMBOL(pwm_free);
+
+#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
+#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
+#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
+#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 1;
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon &= ~pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 0;
+}
+
+EXPORT_SYMBOL(pwm_disable);
+
+unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+{
+	unsigned long tin_parent_rate;
+	unsigned int div;
+
+	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
+	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
+
+	for (div = 2; div <= 16; div *= 2) {
+		if ((tin_parent_rate / (div << 16)) < freq)
+			return tin_parent_rate / div;
+	}
+
+	return tin_parent_rate / 16;
+}
+
+#define NS_IN_HZ (1000000000UL)
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long tin_rate;
+	unsigned long tin_ns;
+	unsigned long period;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned long tcnt;
+	long tcmp;
+
+	/* We currently avoid using 64bit arithmetic by using the
+	 * fact that anything faster than 1Hz is easily representable
+	 * by 32bits. */
+
+	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
+		return -ERANGE;
+
+	if (duty_ns > period_ns)
+		return -EINVAL;
+
+	if (period_ns == pwm->period_ns &&
+	    duty_ns == pwm->duty_ns)
+		return 0;
+
+	/* The TCMP and TCNT can be read without a lock, they're not
+	 * shared between the timers. */
+
+	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
+	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
+
+	period = NS_IN_HZ / period_ns;
+
+	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
+		duty_ns, period_ns, period);
+
+	/* Check to see if we are changing the clock rate of the PWM */
+
+	if (pwm->period_ns != period_ns) {
+		if (pwm_is_tdiv(pwm)) {
+			tin_rate = pwm_calc_tin(pwm, period);
+			clk_set_rate(pwm->clk_div, tin_rate);
+		} else
+			tin_rate = clk_get_rate(pwm->clk);
+
+		pwm->period_ns = period_ns;
+
+		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
+
+		tin_ns = NS_IN_HZ / tin_rate;
+		tcnt = period_ns / tin_ns;
+	} else
+		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
+
+	/* Note, counters count down */
+
+	tcmp = duty_ns / tin_ns;
+	tcmp = tcnt - tcmp;
+
+	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
+
+	if (tcmp < 0)
+		tcmp = 0;
+
+	/* Update the PWM register block. */
+
+	local_irq_save(flags);
+
+	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
+	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_manulupdate(pwm);
+	tcon |= pwm_tcon_autoreload(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	tcon &= ~pwm_tcon_manulupdate(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_config);
+
+static int pwm_register(struct pwm_device *pwm)
+{
+	pwm->duty_ns = -1;
+	pwm->period_ns = -1;
+
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->list, &pwm_list);
+	mutex_unlock(&pwm_lock);
+
+	return 0;
+}
+
+static int s3c_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pwm_device *pwm;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned int id = pdev->id;
+	int ret;
+
+	if (id == 4) {
+		dev_err(dev, "TIMER4 is currently not supported\n");
+		return -ENXIO;
+	}
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(dev, "failed to allocate pwm_device\n");
+		return -ENOMEM;
+	}
+
+	pwm->pdev = pdev;
+	pwm->pwm_id = id;
+
+	/* calculate base of control bits in TCON */
+	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+
+	pwm->clk = clk_get(dev, "pwm-tin");
+	if (IS_ERR(pwm->clk)) {
+		dev_err(dev, "failed to get pwm tin clk\n");
+		ret = PTR_ERR(pwm->clk);
+		goto err_alloc;
+	}
+
+	pwm->clk_div = clk_get(dev, "pwm-tdiv");
+	if (IS_ERR(pwm->clk_div)) {
+		dev_err(dev, "failed to get pwm tdiv clk\n");
+		ret = PTR_ERR(pwm->clk_div);
+		goto err_clk_tin;
+	}
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_invert(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+
+	ret = pwm_register(pwm);
+	if (ret) {
+		dev_err(dev, "failed to register pwm\n");
+		goto err_clk_tdiv;
+	}
+
+	pwm_dbg(pwm, "config bits %02x\n",
+		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
+
+	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
+		 clk_get_rate(pwm->clk),
+		 clk_get_rate(pwm->clk_div),
+		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+ err_clk_tdiv:
+	clk_put(pwm->clk_div);
+
+ err_clk_tin:
+	clk_put(pwm->clk);
+
+ err_alloc:
+	kfree(pwm);
+	return ret;
+}
+
+static int s3c_pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+	clk_put(pwm->clk_div);
+	clk_put(pwm->clk);
+	kfree(pwm);
+
+	return 0;
+}
+
+static struct platform_driver s3c_pwm_driver = {
+	.driver		= {
+		.name	= "s3c24xx-pwm",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c_pwm_probe,
+	.remove		= __devexit_p(s3c_pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+	int ret;
+
+	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
+	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
+
+	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
+		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = platform_driver_register(&s3c_pwm_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
+
+	return ret;
+}
+
+arch_initcall(pwm_init);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 207a8b5a0c4a..8b8f564c3aa2 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Apr 19 11:23:38 2008
+# Last update: Sun Jul 13 12:04:05 2008
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -560,7 +560,6 @@ husky			MACH_HUSKY		HUSKY			543
 boxer			MACH_BOXER		BOXER			544
 shepherd		MACH_SHEPHERD		SHEPHERD		545
 aml42800aa		MACH_AML42800AA		AML42800AA		546
-ml674001		MACH_MACH_TYPE_ML674001	MACH_TYPE_ML674001	547
 lpc2294			MACH_LPC2294		LPC2294			548
 switchgrass		MACH_SWITCHGRASS	SWITCHGRASS		549
 ens_cmu			MACH_ENS_CMU		ENS_CMU			550
@@ -748,7 +747,6 @@ anubis			MACH_ANUBIS		ANUBIS			734
 ite8152			MACH_ITE8152		ITE8152			735
 lpc3xxx			MACH_LPC3XXX		LPC3XXX			736
 puppeteer		MACH_PUPPETEER		PUPPETEER		737
-vt001			MACH_MACH_VADATECH	MACH_VADATECH		738
 e570			MACH_E570		E570			739
 x50			MACH_X50		X50			740
 recon			MACH_RECON		RECON			741
@@ -839,7 +837,7 @@ ccxp270			MACH_CCXP		CCXP			825
 omap_gsample		MACH_OMAP_GSAMPLE	OMAP_GSAMPLE		826
 realview_eb		MACH_REALVIEW_EB	REALVIEW_EB		827
 samoa			MACH_SAMOA		SAMOA			828
-t3xscale		MACH_T3XSCALE		T3XSCALE		829
+palmt3			MACH_PALMT3		PALMT3			829
 i878			MACH_I878		I878			830
 borzoi			MACH_BORZOI		BORZOI			831
 gecko			MACH_GECKO		GECKO			832
@@ -895,7 +893,7 @@ mio8390			MACH_MIO8390		MIO8390			881
 omi_board		MACH_OMI_BOARD		OMI_BOARD		882
 mx21civ			MACH_MX21CIV		MX21CIV			883
 mahi_cdac		MACH_MAHI_CDAC		MAHI_CDAC		884
-xscale_palmtx		MACH_XSCALE_PALMTX	XSCALE_PALMTX		885
+palmtx			MACH_PALMTX		PALMTX			885
 s3c2413			MACH_S3C2413		S3C2413			887
 samsys_ep0		MACH_SAMSYS_EP0		SAMSYS_EP0		888
 wg302v1			MACH_WG302V1		WG302V1			889
@@ -918,7 +916,7 @@ nxdb500			MACH_NXDB500		NXDB500			905
 apf9328			MACH_APF9328		APF9328			906
 omap_wipoq		MACH_OMAP_WIPOQ		OMAP_WIPOQ		907
 omap_twip		MACH_OMAP_TWIP		OMAP_TWIP		908
-xscale_treo650		MACH_XSCALE_PALMTREO650	XSCALE_PALMTREO650	909
+palmtreo650		MACH_PALMTREO650	PALMTREO650		909
 acumen			MACH_ACUMEN		ACUMEN			910
 xp100			MACH_XP100		XP100			911
 fs2410			MACH_FS2410		FS2410			912
@@ -926,8 +924,8 @@ pxa270_cerf		MACH_PXA270_CERF	PXA270_CERF		913
 sq2ftlpalm		MACH_SQ2FTLPALM		SQ2FTLPALM		914
 bsemserver		MACH_BSEMSERVER		BSEMSERVER		915
 netclient		MACH_NETCLIENT		NETCLIENT		916
-xscale_palmtt5		MACH_XSCALE_PALMTT5	XSCALE_PALMTT5		917
-xscale_palmtc		MACH_OMAP_PALMTC	OMAP_PALMTC		918
+palmt5			MACH_PALMT5		PALMT5			917
+palmtc			MACH_PALMTC		PALMTC			918
 omap_apollon		MACH_OMAP_APOLLON	OMAP_APOLLON		919
 mxc30030evb		MACH_MXC30030EVB	MXC30030EVB		920
 rea_2d			MACH_REA_2D		REA_2D			921
@@ -1220,7 +1218,6 @@ empca400		MACH_EMPCA400		EMPCA400		1211
 em7210			MACH_EM7210		EM7210			1212
 htchermes		MACH_HTCHERMES		HTCHERMES		1213
 eti_c1			MACH_ETI_C1		ETI_C1			1214
-mach_dep2410		MACH_MACH_DEP2410	MACH_DEP2410		1215
 ac100			MACH_AC100		AC100			1216
 sneetch			MACH_SNEETCH		SNEETCH			1217
 studentmate		MACH_STUDENTMATE	STUDENTMATE		1218
@@ -1421,10 +1418,10 @@ looxc550		MACH_LOOXC550		LOOXC550		1417
 cnty_titan		MACH_CNTY_TITAN		CNTY_TITAN		1418
 app3xx			MACH_APP3XX		APP3XX			1419
 sideoatsgrama		MACH_SIDEOATSGRAMA	SIDEOATSGRAMA		1420
-xscale_palmt700p	MACH_XSCALE_PALMT700P	XSCALE_PALMT700P	1421
-xscale_palmt700w	MACH_XSCALE_PALMT700W	XSCALE_PALMT700W	1422
-xscale_palmt750		MACH_XSCALE_PALMT750	XSCALE_PALMT750		1423
-xscale_palmt755p	MACH_XSCALE_PALMT755P	XSCALE_PALMT755P	1424
+palmtreo700p		MACH_PALMTREO700P	PALMTREO700P		1421
+palmtreo700w		MACH_PALMTREO700W	PALMTREO700W		1422
+palmtreo750		MACH_PALMTREO750	PALMTREO750		1423
+palmtreo755p		MACH_PALMTREO755P	PALMTREO755P		1424
 ezreganut9200		MACH_EZREGANUT9200	EZREGANUT9200		1425
 sarge			MACH_SARGE		SARGE			1426
 a696			MACH_A696		A696			1427
@@ -1463,7 +1460,7 @@ artemis			MACH_ARTEMIS		ARTEMIS			1462
 htctitan		MACH_HTCTITAN		HTCTITAN		1463
 qranium			MACH_QRANIUM		QRANIUM			1464
 adx_wsc2		MACH_ADX_WSC2		ADX_WSC2		1465
-adx_medcom		MACH_ADX_MEDINET	ADX_MEDINET		1466
+adx_medcom		MACH_ADX_MEDCOM		ADX_MEDCOM		1466
 bboard			MACH_BBOARD		BBOARD			1467
 cambria			MACH_CAMBRIA		CAMBRIA			1468
 mt7xxx			MACH_MT7XXX		MT7XXX			1469
@@ -1519,7 +1516,7 @@ wp188			MACH_WP188		WP188			1518
 corsica			MACH_CORSICA		CORSICA			1519
 bigeye			MACH_BIGEYE		BIGEYE			1520
 tll5000			MACH_TLL5000		TLL5000			1522
-hni270			MACH_HNI_X270		HNI_X270		1523
+bebot			MACH_BEBOT		BEBOT			1523
 qong			MACH_QONG		QONG			1524
 tcompact		MACH_TCOMPACT		TCOMPACT		1525
 puma5			MACH_PUMA5		PUMA5			1526
@@ -1636,7 +1633,6 @@ awlug4lcu		MACH_AWLUG4LCU		AWLUG4LCU		1637
 palermoc		MACH_PALERMOC		PALERMOC		1638
 omap_ldp		MACH_OMAP_LDP		OMAP_LDP		1639
 ip500			MACH_IP500		IP500			1640
-mx35ads			MACH_MACH_MX35ADS	MACH_MX35ADS		1641
 ase2			MACH_ASE2		ASE2			1642
 mx35evb			MACH_MX35EVB		MX35EVB			1643
 aml_m8050		MACH_AML_M8050		AML_M8050		1644
@@ -1647,7 +1643,7 @@ badger			MACH_BADGER		BADGER			1648
 trizeps4wl		MACH_TRIZEPS4WL		TRIZEPS4WL		1649
 trizeps5		MACH_TRIZEPS5		TRIZEPS5		1650
 marlin			MACH_MARLIN		MARLIN			1651
-ts7800			MACH_TS7800		TS7800			1652
+ts78xx			MACH_TS78XX		TS78XX			1652
 hpipaq214		MACH_HPIPAQ214		HPIPAQ214		1653
 at572d940dcm		MACH_AT572D940DCM	AT572D940DCM		1654
 ne1board		MACH_NE1BOARD		NE1BOARD		1655
@@ -1720,3 +1716,107 @@ htc_kaiser		MACH_HTC_KAISER		HTC_KAISER		1724
 lg_ks20			MACH_LG_KS20		LG_KS20			1725
 hhgps			MACH_HHGPS		HHGPS			1726
 nokia_n810_wimax	MACH_NOKIA_N810_WIMAX	NOKIA_N810_WIMAX	1727
+insight			MACH_INSIGHT		INSIGHT			1728
+sapphire		MACH_SAPPHIRE		SAPPHIRE		1729
+csb637xo		MACH_CSB637XO		CSB637XO		1730
+evisiong		MACH_EVISIONG		EVISIONG		1731
+stmp37xx		MACH_STMP37XX		STMP37XX		1732
+stmp378x		MACH_STMP38XX		STMP38XX		1733
+tnt			MACH_TNT		TNT			1734
+tbxt			MACH_TBXT		TBXT			1735
+playmate		MACH_PLAYMATE		PLAYMATE		1736
+pns10			MACH_PNS10		PNS10			1737
+eznavi			MACH_EZNAVI		EZNAVI			1738
+ps4000			MACH_PS4000		PS4000			1739
+ezx_a780		MACH_EZX_A780		EZX_A780		1740
+ezx_e680		MACH_EZX_E680		EZX_E680		1741
+ezx_a1200		MACH_EZX_A1200		EZX_A1200		1742
+ezx_e6			MACH_EZX_E6		EZX_E6			1743
+ezx_e2			MACH_EZX_E2		EZX_E2			1744
+ezx_a910		MACH_EZX_A910		EZX_A910		1745
+cwmx31			MACH_CWMX31		CWMX31			1746
+sl2312			MACH_SL2312		SL2312			1747
+blenny			MACH_BLENNY		BLENNY			1748
+ds107			MACH_DS107		DS107			1749
+dsx07			MACH_DSX07		DSX07			1750
+picocom1		MACH_PICOCOM1		PICOCOM1		1751
+lynx_wolverine		MACH_LYNX_WOLVERINE	LYNX_WOLVERINE		1752
+ubisys_p9_sc19		MACH_UBISYS_P9_SC19	UBISYS_P9_SC19		1753
+kratos_low		MACH_KRATOS_LOW		KRATOS_LOW		1754
+m700			MACH_M700		M700			1755
+edmini_v2		MACH_EDMINI_V2		EDMINI_V2		1756
+zipit2			MACH_ZIPIT2		ZIPIT2			1757
+hslfemtocell		MACH_HSLFEMTOCELL	HSLFEMTOCELL		1758
+daintree_at91		MACH_DAINTREE_AT91	DAINTREE_AT91		1759
+sg560usb		MACH_SG560USB		SG560USB		1760
+omap3_pandora		MACH_OMAP3_PANDORA	OMAP3_PANDORA		1761
+usr8200			MACH_USR8200		USR8200			1762
+s1s65k			MACH_S1S65K		S1S65K			1763
+s2s65a			MACH_S2S65A		S2S65A			1764
+icore			MACH_ICORE		ICORE			1765
+mss2			MACH_MSS2		MSS2			1766
+belmont			MACH_BELMONT		BELMONT			1767
+asusp525		MACH_ASUSP525		ASUSP525		1768
+lb88rc8480		MACH_LB88RC8480		LB88RC8480		1769
+hipxa			MACH_HIPXA		HIPXA			1770
+mx25_3ds		MACH_MX25_3DS		MX25_3DS		1771
+m800			MACH_M800		M800			1772
+omap3530_lv_som		MACH_OMAP3530_LV_SOM	OMAP3530_LV_SOM		1773
+prima_evb		MACH_PRIMA_EVB		PRIMA_EVB		1774
+mx31bt1			MACH_MX31BT1		MX31BT1			1775
+atlas4_evb		MACH_ATLAS4_EVB		ATLAS4_EVB		1776
+mx31cicada		MACH_MX31CICADA		MX31CICADA		1777
+mi424wr			MACH_MI424WR		MI424WR			1778
+axs_ultrax		MACH_AXS_ULTRAX		AXS_ULTRAX		1779
+at572d940deb		MACH_AT572D940DEB	AT572D940DEB		1780
+davinci_da8xx_evm	MACH_DAVINCI_DA8XX_EVM	DAVINCI_DA8XX_EVM	1781
+ep9302			MACH_EP9302		EP9302			1782
+at572d940hfeb		MACH_AT572D940HFEB	AT572D940HFEB		1783
+cybook3			MACH_CYBOOK3		CYBOOK3			1784
+wdg002			MACH_WDG002		WDG002			1785
+sg560adsl		MACH_SG560ADSL		SG560ADSL		1786
+nextio_n2800_ica	MACH_NEXTIO_N2800_ICA	NEXTIO_N2800_ICA	1787
+marvell_newdb		MACH_MARVELL_NEWDB	MARVELL_NEWDB		1789
+vandihud		MACH_VANDIHUD		VANDIHUD		1790
+magx_e8			MACH_MAGX_E8		MAGX_E8			1791
+magx_z6			MACH_MAGX_Z6		MAGX_Z6			1792
+magx_v8			MACH_MAGX_V8		MAGX_V8			1793
+magx_u9			MACH_MAGX_U9		MAGX_U9			1794
+toughcf08		MACH_TOUGHCF08		TOUGHCF08		1795
+zw4400			MACH_ZW4400		ZW4400			1796
+marat91			MACH_MARAT91		MARAT91			1797
+overo			MACH_OVERO		OVERO			1798
+at2440evb		MACH_AT2440EVB		AT2440EVB		1799
+neocore926		MACH_NEOCORE926		NEOCORE926		1800
+wnr854t			MACH_WNR854T		WNR854T			1801
+imx27			MACH_IMX27		IMX27			1802
+moose_db		MACH_MOOSE_DB		MOOSE_DB		1803
+fab4			MACH_FAB4		FAB4			1804
+htcdiamond		MACH_HTCDIAMOND		HTCDIAMOND		1805
+fiona			MACH_FIONA		FIONA			1806
+mxc30030_x		MACH_MXC30030_X		MXC30030_X		1807
+bmp1000			MACH_BMP1000		BMP1000			1808
+logi9200		MACH_LOGI9200		LOGI9200		1809
+tqma31			MACH_TQMA31		TQMA31			1810
+ccw9p9215js		MACH_CCW9P9215JS	CCW9P9215JS		1811
+rd88f5181l_ge		MACH_RD88F5181L_GE	RD88F5181L_GE		1812
+sifmain			MACH_SIFMAIN		SIFMAIN			1813
+sam9_l9261		MACH_SAM9_L9261		SAM9_L9261		1814
+cc9m2443js		MACH_CC9M2443JS		CC9M2443JS		1815
+xaria300		MACH_XARIA300		XARIA300		1816
+it9200			MACH_IT9200		IT9200			1817
+rd88f5181l_fxo		MACH_RD88F5181L_FXO	RD88F5181L_FXO		1818
+kriss_sensor		MACH_KRISS_SENSOR	KRISS_SENSOR		1819
+pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
+jade			MACH_JADE		JADE			1821
+ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
+gprisc4			MACH_GPRISC4		GPRISC4			1823
+stamp9260		MACH_STAMP9260		STAMP9260		1824
+smdk6430		MACH_SMDK6430		SMDK6430		1825
+smdkc100		MACH_SMDKC100		SMDKC100		1826
+tavorevb		MACH_TAVOREVB		TAVOREVB		1827
+saar			MACH_SAAR		SAAR			1828
+deister_eyecam		MACH_DEISTER_EYECAM	DEISTER_EYECAM		1829
+at91sam9m10ek		MACH_AT91SAM9M10EK	AT91SAM9M10EK		1830
+linkstation_produo	MACH_LINKSTATION_PRODUO	LINKSTATION_PRODUO	1831
+hit_b0			MACH_HIT_B0		HIT_B0			1832
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 32455c633f1c..c0d2c9bb952b 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -352,7 +352,7 @@ static int __init vfp_init(void)
 	else if (vfpsid & FPSID_NODOUBLE) {
 		printk("no double precision support\n");
 	} else {
-		smp_call_function(vfp_enable, NULL, 1, 1);
+		smp_call_function(vfp_enable, NULL, 1);
 
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
 		printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 09ad7995080c..7c239a916275 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,6 +10,7 @@ config AVR32
 	# With EMBEDDED=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
 	select EMBEDDED
+	select HAVE_CLK
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	help
@@ -87,7 +88,8 @@ config PLATFORM_AT32AP
 	select SUBARCH_AVR32B
 	select MMU
 	select PERFORMANCE_COUNTERS
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_ALLOCATOR
 
 #
 # CPU types
@@ -147,6 +149,9 @@ config PHYS_OFFSET
 
 source "kernel/Kconfig.preempt"
 
+config QUICKLIST
+	def_bool y
+
 config HAVE_ARCH_BOOTMEM_NODE
 	def_bool n
 
@@ -201,6 +206,11 @@ endmenu
 
 menu "Power management options"
 
+source "kernel/power/Kconfig"
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool y
+
 menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index a398be284966..c7fe94d03a1e 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -9,6 +9,8 @@
  */
 #include <linux/clk.h>
 #include <linux/etherdevice.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
@@ -17,6 +19,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 
+#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
@@ -25,6 +28,13 @@
 #include <asm/arch/init.h>
 #include <asm/arch/portmux.h>
 
+/* Oscillator frequencies. These are board-specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
 /* Initialized by bootloader-specific startup code. */
 struct tag *bootloader_tags __initdata;
 
@@ -42,6 +52,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
 	},
 };
 
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_PC(25),
+	.wp_pin		= GPIO_PIN_PE(0),
+};
+
 /*
  * The next two functions should go away as the boot loader is
  * supposed to initialize the macb address registers with a valid
@@ -140,6 +155,10 @@ static struct platform_device i2c_gpio_device = {
 	},
 };
 
+static struct i2c_board_info __initdata i2c_info[] = {
+	/* NOTE:  original ATtiny24 firmware is at address 0x0b */
+};
+
 static int __init atngw100_init(void)
 {
 	unsigned	i;
@@ -157,6 +176,7 @@ static int __init atngw100_init(void)
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 
 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+	at32_add_device_mci(0, &mci0_data);
 	at32_add_device_usba(0, NULL);
 
 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
@@ -165,12 +185,28 @@ static int __init atngw100_init(void)
 	}
 	platform_device_register(&ngw_gpio_leds);
 
+	/* all these i2c/smbus pins should have external pullups for
+	 * open-drain sharing among all I2C devices.  SDA and SCL do;
+	 * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
+	 * but it's not available off-board.
+	 */
+	at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
 	at32_select_gpio(i2c_gpio_data.sda_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	at32_select_gpio(i2c_gpio_data.scl_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	platform_device_register(&i2c_gpio_device);
+	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
 
 	return 0;
 }
 postcore_initcall(atngw100_init);
+
+static int __init atngw100_arch_init(void)
+{
+	/* set_irq_type() after the arch_initcall for EIC has run, and
+	 * before the I2C subsystem could try using this IRQ.
+	 */
+	return set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING);
+}
+arch_initcall(atngw100_arch_init);
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 000eb4220a12..e11659b732fa 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -28,6 +28,12 @@
 
 #include "atstk1000.h"
 
+/* Oscillator frequencies. These are board specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
 
 struct eth_addr {
 	u8 addr[6];
@@ -228,11 +234,14 @@ static int __init atstk1002_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+	at32_add_device_mci(0, NULL);
+#endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size);
+			     fbmem_start, fbmem_size, 0);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index a0b223df35a2..ea109f435a83 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -27,6 +27,13 @@
 
 #include "atstk1000.h"
 
+/* Oscillator frequencies. These are board specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
 #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 0,
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index e765a8652b3e..c7236df74d74 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -29,6 +29,13 @@
 
 #include "atstk1000.h"
 
+/* Oscillator frequencies. These are board specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
 #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 0,
@@ -133,7 +140,7 @@ static int __init atstk1004_init(void)
 	at32_add_device_mci(0);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size);
+			     fbmem_start, fbmem_size, 0);
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
 	at32_add_device_ssc(0, ATMEL_SSC_TX);
diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
index b8409caeb23d..e84faffbbeca 100644
--- a/arch/avr32/kernel/cpu.c
+++ b/arch/avr32/kernel/cpu.c
@@ -26,14 +26,16 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
  * XXX: If/when a SMP-capable implementation of AVR32 will ever be
  * made, we must make sure that the code executes on the correct CPU.
  */
-static ssize_t show_pc0event(struct sys_device *dev, char *buf)
+static ssize_t show_pc0event(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f);
 }
-static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc0event(struct sys_device *dev,
+			struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -46,15 +48,17 @@ static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc0count(struct sys_device *dev, char *buf)
+static ssize_t show_pc0count(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pcnt0;
 
 	pcnt0 = sysreg_read(PCNT0);
 	return sprintf(buf, "%lu\n", pcnt0);
 }
-static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
-			      size_t count)
+static ssize_t store_pc0count(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				const char *buf, size_t count)
 {
 	unsigned long val;
 	char *endp;
@@ -67,14 +71,16 @@ static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pc1event(struct sys_device *dev, char *buf)
+static ssize_t show_pc1event(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f);
 }
-static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1event(struct sys_device *dev,
+			      struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -87,14 +93,16 @@ static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc1count(struct sys_device *dev, char *buf)
+static ssize_t show_pc1count(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pcnt1;
 
 	pcnt1 = sysreg_read(PCNT1);
 	return sprintf(buf, "%lu\n", pcnt1);
 }
-static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1count(struct sys_device *dev,
+				struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -108,14 +116,16 @@ static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pccycles(struct sys_device *dev, char *buf)
+static ssize_t show_pccycles(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccnt;
 
 	pccnt = sysreg_read(PCCNT);
 	return sprintf(buf, "%lu\n", pccnt);
 }
-static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
+static ssize_t store_pccycles(struct sys_device *dev,
+				struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -129,14 +139,16 @@ static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pcenable(struct sys_device *dev, char *buf)
+static ssize_t show_pcenable(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "%c\n", (pccr & 1)?'1':'0');
 }
-static ssize_t store_pcenable(struct sys_device *dev, const char *buf,
+static ssize_t store_pcenable(struct sys_device *dev,
+			      struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long pccr, val;
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 5f31702d6b1c..2b398cae110c 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -74,50 +74,41 @@ exception_vectors:
 	.align	2
 	bral	do_dtlb_modified
 
-	/*
-	 * r0 :	PGD/PT/PTE
-	 * r1 : Offending address
-	 * r2 : Scratch register
-	 * r3 : Cause (5, 12 or 13)
-	 */
 #define	tlbmiss_save	pushm	r0-r3
 #define tlbmiss_restore	popm	r0-r3
 
-	.section .tlbx.ex.text,"ax",@progbits
+	.org	0x50
 	.global	itlb_miss
 itlb_miss:
 	tlbmiss_save
 	rjmp	tlb_miss_common
 
-	.section .tlbr.ex.text,"ax",@progbits
+	.org	0x60
 dtlb_miss_read:
 	tlbmiss_save
 	rjmp	tlb_miss_common
 
-	.section .tlbw.ex.text,"ax",@progbits
+	.org	0x70
 dtlb_miss_write:
 	tlbmiss_save
 
 	.global	tlb_miss_common
+	.align	2
 tlb_miss_common:
 	mfsr	r0, SYSREG_TLBEAR
 	mfsr	r1, SYSREG_PTBR
 
-	/* Is it the vmalloc space? */
-	bld	r0, 31
-	brcs	handle_vmalloc_miss
-
-	/* First level lookup */
+	/*
+	 * First level lookup: The PGD contains virtual pointers to
+	 * the second-level page tables, but they may be NULL if not
+	 * present.
+	 */
 pgtbl_lookup:
 	lsr	r2, r0, PGDIR_SHIFT
 	ld.w	r3, r1[r2 << 2]
 	bfextu	r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
-	bld	r3, _PAGE_BIT_PRESENT
-	brcc	page_table_not_present
-
-	/* Translate to virtual address in P1. */
-	andl	r3, 0xf000
-	sbr	r3, 31
+	cp.w	r3, 0
+	breq	page_table_not_present
 
 	/* Second level lookup */
 	ld.w	r2, r3[r1 << 2]
@@ -148,16 +139,55 @@ pgtbl_lookup:
 	tlbmiss_restore
 	rete
 
-handle_vmalloc_miss:
-	/* Simply do the lookup in init's page table */
+	/* The slow path of the TLB miss handler */
+	.align	2
+page_table_not_present:
+	/* Do we need to synchronize with swapper_pg_dir? */
+	bld	r0, 31
+	brcs	sync_with_swapper_pg_dir
+
+page_not_present:
+	tlbmiss_restore
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	rcall	save_full_context_ex
+	mfsr	r12, SYSREG_ECR
+	mov	r11, sp
+	rcall	do_page_fault
+	rjmp	ret_from_exception
+
+	.align	2
+sync_with_swapper_pg_dir:
+	/*
+	 * If swapper_pg_dir contains a non-NULL second-level page
+	 * table pointer, copy it into the current PGD. If not, we
+	 * must handle it as a full-blown page fault.
+	 *
+	 * Jumping back to pgtbl_lookup causes an unnecessary lookup,
+	 * but it is guaranteed to be a cache hit, it won't happen
+	 * very often, and we absolutely do not want to sacrifice any
+	 * performance in the fast path in order to improve this.
+	 */
 	mov	r1, lo(swapper_pg_dir)
 	orh	r1, hi(swapper_pg_dir)
+	ld.w	r3, r1[r2 << 2]
+	cp.w	r3, 0
+	breq	page_not_present
+	mfsr	r1, SYSREG_PTBR
+	st.w	r1[r2 << 2], r3
 	rjmp	pgtbl_lookup
 
+	/*
+	 * We currently have two bytes left at this point until we
+	 * crash into the system call handler...
+	 *
+	 * Don't worry, the assembler will let us know.
+	 */
+
 
 	/* ---                    System Call                    --- */
 
-	.section .scall.text,"ax",@progbits
+	.org	0x100
 system_call:
 #ifdef CONFIG_PREEMPT
 	mask_interrupts
@@ -266,18 +296,6 @@ syscall_exit_work:
 	brcc	syscall_exit_cont
 	rjmp	enter_monitor_mode
 
-	/* The slow path of the TLB miss handler */
-page_table_not_present:
-page_not_present:
-	tlbmiss_restore
-	sub	sp, 4
-	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
-	mfsr	r12, SYSREG_ECR
-	mov	r11, sp
-	rcall	do_page_fault
-	rjmp	ret_from_exception
-
 	/* This function expects to find offending PC in SYSREG_RAR_EX */
 	.type	save_full_context_ex, @function
 	.align	2
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 6cf9df176274..ff820a9e743a 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -31,7 +31,7 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			cpu_idle_sleep();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 5616a00c10ba..c5b11f9067f1 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -93,6 +93,9 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
+		goto badframe;
+
 	pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n",
 		 regs->pc, regs->lr, regs->sp);
 
diff --git a/arch/avr32/kernel/stacktrace.c b/arch/avr32/kernel/stacktrace.c
index 9a68190bbffd..c09f0d8dd679 100644
--- a/arch/avr32/kernel/stacktrace.c
+++ b/arch/avr32/kernel/stacktrace.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 
 register unsigned long current_frame_pointer asm("r7");
 
@@ -51,3 +52,4 @@ void save_stack_trace(struct stack_trace *trace)
 		fp = frame->fp;
 	}
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 00a9862380ff..abd954fb7ba0 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -7,21 +7,13 @@
  */
 #include <linux/clk.h>
 #include <linux/clockchips.h>
-#include <linux/time.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/sysdev.h>
-#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
 
-#include <asm/div64.h>
 #include <asm/sysreg.h>
-#include <asm/io.h>
-#include <asm/sections.h>
 
 #include <asm/arch/pm.h>
 
diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
index 481cfd40c053..7910d41eb886 100644
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -68,14 +68,6 @@ SECTIONS
 		_evba = .;
 		_text = .;
 		*(.ex.text)
-		. = 0x50;
-		*(.tlbx.ex.text)
-		. = 0x60;
-		*(.tlbr.ex.text)
-		. = 0x70;
-		*(.tlbw.ex.text)
-		. = 0x100;
-		*(.scall.text)
 		*(.irq.text)
 		KPROBES_TEXT
 		TEXT_TEXT
@@ -93,8 +85,6 @@ SECTIONS
 		__stop___ex_table = .;
 	}
 
-	BUG_TABLE
-
 	RODATA
 
 	. = ALIGN(THREAD_SIZE);
@@ -107,6 +97,10 @@ SECTIONS
 		 */
 		*(.data.init_task)
 
+		/* Then, the page-aligned data */
+		. = ALIGN(PAGE_SIZE);
+		*(.data.page_aligned)
+
 		/* Then, the cacheline aligned data */
 		. = ALIGN(L1_CACHE_BYTES);
 		*(.data.cacheline_aligned)
diff --git a/arch/avr32/lib/io-readsb.S b/arch/avr32/lib/io-readsb.S
index 2be5da7ed26b..cb2d86945559 100644
--- a/arch/avr32/lib/io-readsb.S
+++ b/arch/avr32/lib/io-readsb.S
@@ -41,7 +41,7 @@ __raw_readsb:
 2:	sub	r10, -4
 	reteq	r12
 
-3:	ld.uh	r8, r12[0]
+3:	ld.ub	r8, r12[0]
 	sub	r10, 1
 	st.b	r11++, r8
 	brne	3b
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index e89009439e4a..d5018e2eed25 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,3 +1,8 @@
-obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
+obj-$(CONFIG_PM)		+= pm.o
+
+ifeq ($(CONFIG_PM_DEBUG),y)
+CFLAGS_pm.o	+= -DDEBUG
+endif
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 0f24b4f85c17..604f44f5dd16 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -7,6 +7,7 @@
  */
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dw_dmac.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -14,12 +15,14 @@
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
+#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
 #include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/portmux.h>
+#include <asm/arch/sram.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -93,19 +96,12 @@ static struct clk devname##_##_name = {				\
 
 static DEFINE_SPINLOCK(pm_lock);
 
-unsigned long at32ap7000_osc_rates[3] = {
-	[0] = 32768,
-	/* FIXME: these are ATSTK1002-specific */
-	[1] = 20000000,
-	[2] = 12000000,
-};
-
 static struct clk osc0;
 static struct clk osc1;
 
 static unsigned long osc_get_rate(struct clk *clk)
 {
-	return at32ap7000_osc_rates[clk->index];
+	return at32_board_osc_rates[clk->index];
 }
 
 static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
@@ -599,6 +595,17 @@ static void __init genclk_init_parent(struct clk *clk)
 	clk->parent = parent;
 }
 
+static struct dw_dma_platform_data dw_dmac0_data = {
+	.nr_channels	= 3,
+};
+
+static struct resource dw_dmac0_resource[] = {
+	PBMEM(0xff200000),
+	IRQ(2),
+};
+DEFINE_DEV_DATA(dw_dmac, 0);
+DEV_CLK(hclk, dw_dmac0, hsb, 10);
+
 /* --------------------------------------------------------------------
  *  System peripherals
  * -------------------------------------------------------------------- */
@@ -682,6 +689,14 @@ static struct clk hramc_clk = {
 	.users		= 1,
 	.index		= 3,
 };
+static struct clk sdramc_clk = {
+	.name		= "sdramc_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 14,
+};
 
 static struct resource smc0_resource[] = {
 	PBMEM(0xfff03400),
@@ -705,17 +720,6 @@ static struct clk pico_clk = {
 	.users		= 1,
 };
 
-static struct resource dmaca0_resource[] = {
-	{
-		.start	= 0xff200000,
-		.end	= 0xff20ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(2),
-};
-DEFINE_DEV(dmaca, 0);
-DEV_CLK(hclk, dmaca0, hsb, 10);
-
 /* --------------------------------------------------------------------
  * HMATRIX
  * -------------------------------------------------------------------- */
@@ -828,7 +832,7 @@ void __init at32_add_system_devices(void)
 	platform_device_register(&at32_eic0_device);
 	platform_device_register(&smc0_device);
 	platform_device_register(&pdc_device);
-	platform_device_register(&dmaca0_device);
+	platform_device_register(&dw_dmac0_device);
 
 	platform_device_register(&at32_tcb0_device);
 	platform_device_register(&at32_tcb1_device);
@@ -841,6 +845,81 @@ void __init at32_add_system_devices(void)
 }
 
 /* --------------------------------------------------------------------
+ *  PSIF
+ * -------------------------------------------------------------------- */
+static struct resource atmel_psif0_resource[] __initdata = {
+	{
+		.start	= 0xffe03c00,
+		.end	= 0xffe03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(18),
+};
+static struct clk atmel_psif0_pclk = {
+	.name		= "pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 15,
+};
+
+static struct resource atmel_psif1_resource[] __initdata = {
+	{
+		.start	= 0xffe03d00,
+		.end	= 0xffe03dff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(18),
+};
+static struct clk atmel_psif1_pclk = {
+	.name		= "pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 15,
+};
+
+struct platform_device *__init at32_add_device_psif(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	if (!(id == 0 || id == 1))
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_psif", id);
+	if (!pdev)
+		return NULL;
+
+	switch (id) {
+	case 0:
+		if (platform_device_add_resources(pdev, atmel_psif0_resource,
+					ARRAY_SIZE(atmel_psif0_resource)))
+			goto err_add_resources;
+		atmel_psif0_pclk.dev = &pdev->dev;
+		select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
+		select_peripheral(PA(9), PERIPH_A, 0); /* DATA  */
+		break;
+	case 1:
+		if (platform_device_add_resources(pdev, atmel_psif1_resource,
+					ARRAY_SIZE(atmel_psif1_resource)))
+			goto err_add_resources;
+		atmel_psif1_pclk.dev = &pdev->dev;
+		select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
+		select_peripheral(PB(12), PERIPH_A, 0); /* DATA  */
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
  *  USART
  * -------------------------------------------------------------------- */
 
@@ -1113,7 +1192,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 	switch (id) {
 	case 0:
 		pdev = &atmel_spi0_device;
-		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
+		/* pullup MISO so a level is always defined */
+		select_peripheral(PA(0),  PERIPH_A, AT32_GPIOF_PULLUP);
 		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
 		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
 		at32_spi_setup_slaves(0, b, n, spi0_pins);
@@ -1121,7 +1201,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 
 	case 1:
 		pdev = &atmel_spi1_device;
-		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
+		/* pullup MISO so a level is always defined */
+		select_peripheral(PB(0),  PERIPH_B, AT32_GPIOF_PULLUP);
 		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
 		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
 		at32_spi_setup_slaves(1, b, n, spi1_pins);
@@ -1199,20 +1280,32 @@ static struct clk atmel_mci0_pclk = {
 	.index		= 9,
 };
 
-struct platform_device *__init at32_add_device_mci(unsigned int id)
+struct platform_device *__init
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
-	struct platform_device *pdev;
+	struct mci_platform_data	_data;
+	struct platform_device		*pdev;
+	struct dw_dma_slave		*dws;
 
 	if (id != 0)
 		return NULL;
 
 	pdev = platform_device_alloc("atmel_mci", id);
 	if (!pdev)
-		return NULL;
+		goto fail;
 
 	if (platform_device_add_resources(pdev, atmel_mci0_resource,
 				ARRAY_SIZE(atmel_mci0_resource)))
-		goto err_add_resources;
+		goto fail;
+
+	if (!data) {
+		data = &_data;
+		memset(data, 0, sizeof(struct mci_platform_data));
+	}
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct mci_platform_data)))
+		goto fail;
 
 	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
 	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
@@ -1221,12 +1314,19 @@ struct platform_device *__init at32_add_device_mci(unsigned int id)
 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
 
+	if (data) {
+		if (data->detect_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->detect_pin, 0);
+		if (data->wp_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->wp_pin, 0);
+	}
+
 	atmel_mci0_pclk.dev = &pdev->dev;
 
 	platform_device_add(pdev);
 	return pdev;
 
-err_add_resources:
+fail:
 	platform_device_put(pdev);
 	return NULL;
 }
@@ -1264,7 +1364,8 @@ static struct clk atmel_lcdfb0_pixclk = {
 
 struct platform_device *__init
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-		     unsigned long fbmem_start, unsigned long fbmem_len)
+		     unsigned long fbmem_start, unsigned long fbmem_len,
+		     unsigned int pin_config)
 {
 	struct platform_device *pdev;
 	struct atmel_lcdfb_info *info;
@@ -1291,37 +1392,77 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 	switch (id) {
 	case 0:
 		pdev = &atmel_lcdfb0_device;
-		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
-		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
-		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
-		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
-		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
-		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
-		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
-		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
-		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
-		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
-		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
-		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
-		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
-		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
-		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
-		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
-		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
-		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
-		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
-		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+
+		switch (pin_config) {
+		case 0:
+			select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
+			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+			select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
+			select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
+			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+			select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
+			select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
+			select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
+			select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
+			select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
+			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+			select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
+			select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
+			select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
+			select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
+			select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
+			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+			select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
+			select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
+			select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
+			select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
+			select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
+			select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
+			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+			break;
+		case 1:
+			select_peripheral(PE(0),  PERIPH_B, 0);	/* CC	  */
+			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+			select_peripheral(PE(1),  PERIPH_B, 0);	/* DVAL	  */
+			select_peripheral(PE(2),  PERIPH_B, 0);	/* MODE	  */
+			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+			select_peripheral(PE(3),  PERIPH_B, 0);	/* DATA0  */
+			select_peripheral(PE(4),  PERIPH_B, 0);	/* DATA1  */
+			select_peripheral(PE(5),  PERIPH_B, 0);	/* DATA2  */
+			select_peripheral(PE(6),  PERIPH_B, 0);	/* DATA3  */
+			select_peripheral(PE(7),  PERIPH_B, 0);	/* DATA4  */
+			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+			select_peripheral(PE(8),  PERIPH_B, 0);	/* DATA8  */
+			select_peripheral(PE(9),  PERIPH_B, 0);	/* DATA9  */
+			select_peripheral(PE(10), PERIPH_B, 0);	/* DATA10 */
+			select_peripheral(PE(11), PERIPH_B, 0);	/* DATA11 */
+			select_peripheral(PE(12), PERIPH_B, 0);	/* DATA12 */
+			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+			select_peripheral(PE(13), PERIPH_B, 0);	/* DATA16 */
+			select_peripheral(PE(14), PERIPH_B, 0);	/* DATA17 */
+			select_peripheral(PE(15), PERIPH_B, 0);	/* DATA18 */
+			select_peripheral(PE(16), PERIPH_B, 0);	/* DATA19 */
+			select_peripheral(PE(17), PERIPH_B, 0);	/* DATA20 */
+			select_peripheral(PE(18), PERIPH_B, 0);	/* DATA21 */
+			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+			break;
+		default:
+			goto err_invalid_id;
+		}
 
 		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
 		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
@@ -1360,7 +1501,7 @@ static struct resource atmel_pwm0_resource[] __initdata = {
 	IRQ(24),
 };
 static struct clk atmel_pwm0_mck = {
-	.name		= "mck",
+	.name		= "pwm_clk",
 	.parent		= &pbb_clk,
 	.mode		= pbb_clk_mode,
 	.get_rate	= pbb_clk_get_rate,
@@ -1887,11 +2028,12 @@ struct clk *at32_clock_list[] = {
 	&hmatrix_clk,
 	&ebi_clk,
 	&hramc_clk,
+	&sdramc_clk,
 	&smc0_pclk,
 	&smc0_mck,
 	&pdc_hclk,
 	&pdc_pclk,
-	&dmaca0_hclk,
+	&dw_dmac0_hclk,
 	&pico_clk,
 	&pio0_mck,
 	&pio1_mck,
@@ -1900,6 +2042,8 @@ struct clk *at32_clock_list[] = {
 	&pio4_mck,
 	&at32_tcb0_t0_clk,
 	&at32_tcb1_t0_clk,
+	&atmel_psif0_pclk,
+	&atmel_psif1_pclk,
 	&atmel_usart0_usart,
 	&atmel_usart1_usart,
 	&atmel_usart2_usart,
@@ -1935,16 +2079,7 @@ struct clk *at32_clock_list[] = {
 };
 unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
 
-void __init at32_portmux_init(void)
-{
-	at32_init_pio(&pio0_device);
-	at32_init_pio(&pio1_device);
-	at32_init_pio(&pio2_device);
-	at32_init_pio(&pio3_device);
-	at32_init_pio(&pio4_device);
-}
-
-void __init at32_clock_init(void)
+void __init setup_platform(void)
 {
 	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
 	int i;
@@ -1999,4 +2134,36 @@ void __init at32_clock_init(void)
 	pm_writel(HSB_MASK, hsb_mask);
 	pm_writel(PBA_MASK, pba_mask);
 	pm_writel(PBB_MASK, pbb_mask);
+
+	/* Initialize the port muxes */
+	at32_init_pio(&pio0_device);
+	at32_init_pio(&pio1_device);
+	at32_init_pio(&pio2_device);
+	at32_init_pio(&pio3_device);
+	at32_init_pio(&pio4_device);
+}
+
+struct gen_pool *sram_pool;
+
+static int __init sram_init(void)
+{
+	struct gen_pool *pool;
+
+	/* 1KiB granularity */
+	pool = gen_pool_create(10, -1);
+	if (!pool)
+		goto fail;
+
+	if (gen_pool_add(pool, 0x24000000, 0x8000, -1))
+		goto err_pool_add;
+
+	sram_pool = pool;
+	return 0;
+
+err_pool_add:
+	gen_pool_destroy(pool);
+fail:
+	pr_err("Failed to create SRAM pool\n");
+	return -ENOMEM;
 }
+core_initcall(sram_init);
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index 097cf4e84052..994c4545e2b7 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006 Atmel Corporation
+ * Copyright (C) 2006, 2008 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,14 +12,20 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/sysdev.h>
 
 #include <asm/io.h>
 
 #include "intc.h"
 
 struct intc {
-	void __iomem	*regs;
-	struct irq_chip	chip;
+	void __iomem		*regs;
+	struct irq_chip		chip;
+	struct sys_device	sysdev;
+#ifdef CONFIG_PM
+	unsigned long		suspend_ipr;
+	unsigned long		saved_ipr[64];
+#endif
 };
 
 extern struct platform_device at32_intc0_device;
@@ -136,6 +142,74 @@ fail:
 	panic("Interrupt controller initialization failed!\n");
 }
 
+#ifdef CONFIG_PM
+void intc_set_suspend_handler(unsigned long offset)
+{
+	intc0.suspend_ipr = offset;
+}
+
+static int intc_suspend(struct sys_device *sdev, pm_message_t state)
+{
+	struct intc *intc = container_of(sdev, struct intc, sysdev);
+	int i;
+
+	if (unlikely(!irqs_disabled())) {
+		pr_err("intc_suspend: called with interrupts enabled\n");
+		return -EINVAL;
+	}
+
+	if (unlikely(!intc->suspend_ipr)) {
+		pr_err("intc_suspend: suspend_ipr not initialized\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < 64; i++) {
+		intc->saved_ipr[i] = intc_readl(intc, INTPR0 + 4 * i);
+		intc_writel(intc, INTPR0 + 4 * i, intc->suspend_ipr);
+	}
+
+	return 0;
+}
+
+static int intc_resume(struct sys_device *sdev)
+{
+	struct intc *intc = container_of(sdev, struct intc, sysdev);
+	int i;
+
+	WARN_ON(!irqs_disabled());
+
+	for (i = 0; i < 64; i++)
+		intc_writel(intc, INTPR0 + 4 * i, intc->saved_ipr[i]);
+
+	return 0;
+}
+#else
+#define intc_suspend	NULL
+#define intc_resume	NULL
+#endif
+
+static struct sysdev_class intc_class = {
+	.name		= "intc",
+	.suspend	= intc_suspend,
+	.resume		= intc_resume,
+};
+
+static int __init intc_init_sysdev(void)
+{
+	int ret;
+
+	ret = sysdev_class_register(&intc_class);
+	if (ret)
+		return ret;
+
+	intc0.sysdev.id = 0;
+	intc0.sysdev.cls = &intc_class;
+	ret = sysdev_register(&intc0.sysdev);
+
+	return ret;
+}
+device_initcall(intc_init_sysdev);
+
 unsigned long intc_get_pending(unsigned int group)
 {
 	return intc_readl(&intc0, INTREQ0 + 4 * group);
diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/pdc.c
index 7c4987f3287a..1040bda4fda7 100644
--- a/arch/avr32/mach-at32ap/at32ap.c
+++ b/arch/avr32/mach-at32ap/pdc.c
@@ -11,14 +11,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/init.h>
-
-void __init setup_platform(void)
-{
-	at32_clock_init();
-	at32_portmux_init();
-}
-
 static int __init pdc_probe(struct platform_device *pdev)
 {
 	struct clk *pclk, *hclk;
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 38a8fa31c0b5..296294f8ed81 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -318,6 +318,8 @@ static void pio_bank_show(struct seq_file *s, struct gpio_chip *chip)
 		const char *label;
 
 		label = gpiochip_is_requested(chip, i);
+		if (!label && (imr & mask))
+			label = "[irq]";
 		if (!label)
 			continue;
 
@@ -358,6 +360,8 @@ static int __init pio_probe(struct platform_device *pdev)
 	pio->chip.label = pio->name;
 	pio->chip.base = pdev->id * 32;
 	pio->chip.ngpio = 32;
+	pio->chip.dev = &pdev->dev;
+	pio->chip.owner = THIS_MODULE;
 
 	pio->chip.direction_input = direction_input;
 	pio->chip.get = gpio_get;
diff --git a/arch/avr32/mach-at32ap/pio.h b/arch/avr32/mach-at32ap/pio.h
index 7795116a483a..9484dfcc08f2 100644
--- a/arch/avr32/mach-at32ap/pio.h
+++ b/arch/avr32/mach-at32ap/pio.h
@@ -57,7 +57,7 @@
 
 /* Bitfields in IFDR */
 
-/* Bitfields in ISFR */
+/* Bitfields in IFSR */
 
 /* Bitfields in SODR */
 
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
index 949e2485e278..0a53ad314ff4 100644
--- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -12,6 +12,12 @@
 #include <asm/thread_info.h>
 #include <asm/arch/pm.h>
 
+#include "pm.h"
+#include "sdramc.h"
+
+/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
+#define PM_BASE	-0x100000
+
 	.section .bss, "wa", @nobits
 	.global	disable_idle_sleep
 	.type	disable_idle_sleep, @object
@@ -64,3 +70,105 @@ cpu_idle_skip_sleep:
 	unmask_interrupts
 	retal	r12
 	.size	cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
+
+#ifdef CONFIG_PM
+	.section .init.text, "ax", @progbits
+
+	.global	pm_exception
+	.type	pm_exception, @function
+pm_exception:
+	/*
+	 * Exceptions are masked when we switch to this handler, so
+	 * we'll only get "unrecoverable" exceptions (offset 0.)
+	 */
+	sub	r12, pc, . - .Lpanic_msg
+	lddpc	pc, .Lpanic_addr
+
+	.align	2
+.Lpanic_addr:
+	.long	panic
+.Lpanic_msg:
+	.asciz	"Unrecoverable exception during suspend\n"
+	.size	pm_exception, . - pm_exception
+
+	.global	pm_irq0
+	.type	pm_irq0, @function
+pm_irq0:
+	/* Disable interrupts and return after the sleep instruction */
+	mfsr	r9, SYSREG_RSR_INT0
+	mtsr	SYSREG_RAR_INT0, r8
+	sbr	r9, SYSREG_GM_OFFSET
+	mtsr	SYSREG_RSR_INT0, r9
+	rete
+
+	/*
+	 * void cpu_enter_standby(unsigned long sdramc_base)
+	 *
+	 * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
+	 * are suspended and interrupts are disabled. Interrupts
+	 * marked as 'wakeup' event sources may still come along and
+	 * get us out of here.
+	 *
+	 * The SDRAM will be put into self-refresh mode (which does
+	 * not require a clock from the CPU), and the CPU will be put
+	 * into "frozen" mode (HSB bus stopped). The SDRAM controller
+	 * will automatically bring the SDRAM into normal mode on the
+	 * first access, and the power manager will automatically
+	 * start the HSB and CPU clocks upon a wakeup event.
+	 *
+	 * This code uses the same "skip sleep" technique as above.
+	 * It is very important that we jump directly to
+	 * cpu_after_sleep after the sleep instruction since that's
+	 * where we'll end up if the interrupt handler decides that we
+	 * need to skip the sleep instruction.
+	 */
+	.global	pm_standby
+	.type	pm_standby, @function
+pm_standby:
+	/*
+	 * interrupts are already masked at this point, and EVBA
+	 * points to pm_exception above.
+	 */
+	ld.w	r10, r12[SDRAMC_LPR]
+	sub	r8, pc, . - 1f		/* return address for irq handler */
+	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
+	bfins	r10, r11, 0, 2		/* LPCB <- self Refresh */
+	sync	0			/* flush write buffer */
+	st.w	r12[SDRAMC_LPR], r11	/* put SDRAM in self-refresh mode */
+	ld.w	r11, r12[SDRAMC_LPR]
+	unmask_interrupts
+	sleep	CPU_SLEEP_FROZEN
+1:	mask_interrupts
+	retal	r12
+	.size	pm_standby, . - pm_standby
+
+	.global	pm_suspend_to_ram
+	.type	pm_suspend_to_ram, @function
+pm_suspend_to_ram:
+	/*
+	 * interrupts are already masked at this point, and EVBA
+	 * points to pm_exception above.
+	 */
+	mov	r11, 0
+	cache	r11[2], 8		/* clean all dcache lines */
+	sync	0			/* flush write buffer */
+	ld.w	r10, r12[SDRAMC_LPR]
+	sub	r8, pc, . - 1f		/* return address for irq handler */
+	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
+	bfins	r10, r11, 0, 2		/* LPCB <- self refresh */
+	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
+	ld.w	r11, r12[SDRAMC_LPR]
+
+	unmask_interrupts
+	sleep	CPU_SLEEP_STOP
+1:	mask_interrupts
+
+	retal	r12
+	.size	pm_suspend_to_ram, . - pm_suspend_to_ram
+
+	.global	pm_sram_end
+	.type	pm_sram_end, @function
+pm_sram_end:
+	.size	pm_sram_end, 0
+
+#endif /* CONFIG_PM */
diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c
new file mode 100644
index 000000000000..0b764320135d
--- /dev/null
+++ b/arch/avr32/mach-at32ap/pm.c
@@ -0,0 +1,245 @@
+/*
+ * AVR32 AP Power Management
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <linux/vmalloc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/sysreg.h>
+
+#include <asm/arch/pm.h>
+#include <asm/arch/sram.h>
+
+/* FIXME: This is only valid for AP7000 */
+#define SDRAMC_BASE	0xfff03800
+
+#include "sdramc.h"
+
+#define SRAM_PAGE_FLAGS	(SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1)	\
+				| SYSREG_BF(AP, 3) | SYSREG_BIT(G))
+
+
+static unsigned long	pm_sram_start;
+static size_t		pm_sram_size;
+static struct vm_struct	*pm_sram_area;
+
+static void (*avr32_pm_enter_standby)(unsigned long sdramc_base);
+static void (*avr32_pm_enter_str)(unsigned long sdramc_base);
+
+/*
+ * Must be called with interrupts disabled. Exceptions will be masked
+ * on return (i.e. all exceptions will be "unrecoverable".)
+ */
+static void *avr32_pm_map_sram(void)
+{
+	unsigned long	vaddr;
+	unsigned long	page_addr;
+	u32		tlbehi;
+	u32		mmucr;
+
+	vaddr = (unsigned long)pm_sram_area->addr;
+	page_addr = pm_sram_start & PAGE_MASK;
+
+	/*
+	 * Mask exceptions and grab the first TLB entry. We won't be
+	 * needing it while sleeping.
+	 */
+	asm volatile("ssrf	%0" : : "i"(SYSREG_EM_OFFSET) : "memory");
+
+	mmucr = sysreg_read(MMUCR);
+	tlbehi = sysreg_read(TLBEHI);
+	sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
+
+	tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
+	tlbehi |= vaddr & PAGE_MASK;
+	tlbehi |= SYSREG_BIT(TLBEHI_V);
+
+	sysreg_write(TLBELO, page_addr | SRAM_PAGE_FLAGS);
+	sysreg_write(TLBEHI, tlbehi);
+	__builtin_tlbw();
+
+	return (void *)(vaddr + pm_sram_start - page_addr);
+}
+
+/*
+ * Must be called with interrupts disabled. Exceptions will be
+ * unmasked on return.
+ */
+static void avr32_pm_unmap_sram(void)
+{
+	u32	mmucr;
+	u32	tlbehi;
+	u32	tlbarlo;
+
+	/* Going to update TLB entry at index 0 */
+	mmucr = sysreg_read(MMUCR);
+	tlbehi = sysreg_read(TLBEHI);
+	sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
+
+	/* Clear the "valid" bit */
+	tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
+	sysreg_write(TLBEHI, tlbehi);
+
+	/* Mark it as "not accessed" */
+	tlbarlo = sysreg_read(TLBARLO);
+	sysreg_write(TLBARLO, tlbarlo | 0x80000000U);
+
+	/* Update the TLB */
+	__builtin_tlbw();
+
+	/* Unmask exceptions */
+	asm volatile("csrf	%0" : : "i"(SYSREG_EM_OFFSET) : "memory");
+}
+
+static int avr32_pm_valid_state(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_ON:
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+static int avr32_pm_enter(suspend_state_t state)
+{
+	u32		lpr_saved;
+	u32		evba_saved;
+	void		*sram;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		sram = avr32_pm_map_sram();
+
+		/* Switch to in-sram exception handlers */
+		evba_saved = sysreg_read(EVBA);
+		sysreg_write(EVBA, (unsigned long)sram);
+
+		/*
+		 * Save the LPR register so that we can re-enable
+		 * SDRAM Low Power mode on resume.
+		 */
+		lpr_saved = sdramc_readl(LPR);
+		pr_debug("%s: Entering standby...\n", __func__);
+		avr32_pm_enter_standby(SDRAMC_BASE);
+		sdramc_writel(LPR, lpr_saved);
+
+		/* Switch back to regular exception handlers */
+		sysreg_write(EVBA, evba_saved);
+
+		avr32_pm_unmap_sram();
+		break;
+
+	case PM_SUSPEND_MEM:
+		sram = avr32_pm_map_sram();
+
+		/* Switch to in-sram exception handlers */
+		evba_saved = sysreg_read(EVBA);
+		sysreg_write(EVBA, (unsigned long)sram);
+
+		/*
+		 * Save the LPR register so that we can re-enable
+		 * SDRAM Low Power mode on resume.
+		 */
+		lpr_saved = sdramc_readl(LPR);
+		pr_debug("%s: Entering suspend-to-ram...\n", __func__);
+		avr32_pm_enter_str(SDRAMC_BASE);
+		sdramc_writel(LPR, lpr_saved);
+
+		/* Switch back to regular exception handlers */
+		sysreg_write(EVBA, evba_saved);
+
+		avr32_pm_unmap_sram();
+		break;
+
+	case PM_SUSPEND_ON:
+		pr_debug("%s: Entering idle...\n", __func__);
+		cpu_enter_idle();
+		break;
+
+	default:
+		pr_debug("%s: Invalid suspend state %d\n", __func__, state);
+		goto out;
+	}
+
+	pr_debug("%s: wakeup\n", __func__);
+
+out:
+	return 0;
+}
+
+static struct platform_suspend_ops avr32_pm_ops = {
+	.valid	= avr32_pm_valid_state,
+	.enter	= avr32_pm_enter,
+};
+
+static unsigned long avr32_pm_offset(void *symbol)
+{
+	extern u8 pm_exception[];
+
+	return (unsigned long)symbol - (unsigned long)pm_exception;
+}
+
+static int __init avr32_pm_init(void)
+{
+	extern u8 pm_exception[];
+	extern u8 pm_irq0[];
+	extern u8 pm_standby[];
+	extern u8 pm_suspend_to_ram[];
+	extern u8 pm_sram_end[];
+	void *dst;
+
+	/*
+	 * To keep things simple, we depend on not needing more than a
+	 * single page.
+	 */
+	pm_sram_size = avr32_pm_offset(pm_sram_end);
+	if (pm_sram_size > PAGE_SIZE)
+		goto err;
+
+	pm_sram_start = sram_alloc(pm_sram_size);
+	if (!pm_sram_start)
+		goto err_alloc_sram;
+
+	/* Grab a virtual area we can use later on. */
+	pm_sram_area = get_vm_area(pm_sram_size, VM_IOREMAP);
+	if (!pm_sram_area)
+		goto err_vm_area;
+	pm_sram_area->phys_addr = pm_sram_start;
+
+	local_irq_disable();
+	dst = avr32_pm_map_sram();
+	memcpy(dst, pm_exception, pm_sram_size);
+	flush_dcache_region(dst, pm_sram_size);
+	invalidate_icache_region(dst, pm_sram_size);
+	avr32_pm_unmap_sram();
+	local_irq_enable();
+
+	avr32_pm_enter_standby = dst + avr32_pm_offset(pm_standby);
+	avr32_pm_enter_str = dst + avr32_pm_offset(pm_suspend_to_ram);
+	intc_set_suspend_handler(avr32_pm_offset(pm_irq0));
+
+	suspend_set_ops(&avr32_pm_ops);
+
+	printk("AVR32 AP Power Management enabled\n");
+
+	return 0;
+
+err_vm_area:
+	sram_free(pm_sram_start, pm_sram_size);
+err_alloc_sram:
+err:
+	pr_err("AVR32 Power Management initialization failed\n");
+	return -ENOMEM;
+}
+arch_initcall(avr32_pm_init);
diff --git a/arch/avr32/mach-at32ap/sdramc.h b/arch/avr32/mach-at32ap/sdramc.h
new file mode 100644
index 000000000000..66eeaed49073
--- /dev/null
+++ b/arch/avr32/mach-at32ap/sdramc.h
@@ -0,0 +1,76 @@
+/*
+ * Register definitions for the AT32AP SDRAM Controller
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+/* Register offsets */
+#define SDRAMC_MR			0x0000
+#define SDRAMC_TR			0x0004
+#define SDRAMC_CR			0x0008
+#define SDRAMC_HSR			0x000c
+#define SDRAMC_LPR			0x0010
+#define SDRAMC_IER			0x0014
+#define SDRAMC_IDR			0x0018
+#define SDRAMC_IMR			0x001c
+#define SDRAMC_ISR			0x0020
+#define SDRAMC_MDR			0x0024
+
+/* MR - Mode Register */
+#define SDRAMC_MR_MODE_NORMAL		(  0 <<  0)
+#define SDRAMC_MR_MODE_NOP		(  1 <<  0)
+#define SDRAMC_MR_MODE_BANKS_PRECHARGE	(  2 <<  0)
+#define SDRAMC_MR_MODE_LOAD_MODE	(  3 <<  0)
+#define SDRAMC_MR_MODE_AUTO_REFRESH	(  4 <<  0)
+#define SDRAMC_MR_MODE_EXT_LOAD_MODE	(  5 <<  0)
+#define SDRAMC_MR_MODE_POWER_DOWN	(  6 <<  0)
+
+/* CR - Configuration Register */
+#define SDRAMC_CR_NC_8_BITS		(  0 <<  0)
+#define SDRAMC_CR_NC_9_BITS		(  1 <<  0)
+#define SDRAMC_CR_NC_10_BITS		(  2 <<  0)
+#define SDRAMC_CR_NC_11_BITS		(  3 <<  0)
+#define SDRAMC_CR_NR_11_BITS		(  0 <<  2)
+#define SDRAMC_CR_NR_12_BITS		(  1 <<  2)
+#define SDRAMC_CR_NR_13_BITS		(  2 <<  2)
+#define SDRAMC_CR_NB_2_BANKS		(  0 <<  4)
+#define SDRAMC_CR_NB_4_BANKS		(  1 <<  4)
+#define SDRAMC_CR_CAS(x)		((x) <<  5)
+#define SDRAMC_CR_DBW_32_BITS		(  0 <<  7)
+#define SDRAMC_CR_DBW_16_BITS		(  1 <<  7)
+#define SDRAMC_CR_TWR(x)		((x) <<  8)
+#define SDRAMC_CR_TRC(x)		((x) << 12)
+#define SDRAMC_CR_TRP(x)		((x) << 16)
+#define SDRAMC_CR_TRCD(x)		((x) << 20)
+#define SDRAMC_CR_TRAS(x)		((x) << 24)
+#define SDRAMC_CR_TXSR(x)		((x) << 28)
+
+/* HSR - High Speed Register */
+#define SDRAMC_HSR_DA			(  1 <<  0)
+
+/* LPR - Low Power Register */
+#define SDRAMC_LPR_LPCB_INHIBIT		(  0 <<  0)
+#define SDRAMC_LPR_LPCB_SELF_RFR	(  1 <<  0)
+#define SDRAMC_LPR_LPCB_PDOWN		(  2 <<  0)
+#define SDRAMC_LPR_LPCB_DEEP_PDOWN	(  3 <<  0)
+#define SDRAMC_LPR_PASR(x)		((x) <<  4)
+#define SDRAMC_LPR_TCSR(x)		((x) <<  8)
+#define SDRAMC_LPR_DS(x)		((x) << 10)
+#define SDRAMC_LPR_TIMEOUT(x)		((x) << 12)
+
+/* IER/IDR/IMR/ISR - Interrupt Enable/Disable/Mask/Status Register */
+#define SDRAMC_ISR_RES			(  1 <<  0)
+
+/* MDR - Memory Device Register */
+#define SDRAMC_MDR_MD_SDRAM		(  0 <<  0)
+#define SDRAMC_MDR_MD_LOW_PWR_SDRAM	(  1 <<  0)
+
+/* Register access macros */
+#define sdramc_readl(reg) \
+	__raw_readl((void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
+#define sdramc_writel(reg, value) \
+	__raw_writel(value, (void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 0e64ddc45e37..fa92ff6d95f7 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -11,6 +11,7 @@
 #include <linux/swap.h>
 #include <linux/init.h>
 #include <linux/mmzone.h>
+#include <linux/module.h>
 #include <linux/bootmem.h>
 #include <linux/pagemap.h>
 #include <linux/nodemask.h>
@@ -23,56 +24,20 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 
+#define __page_aligned	__attribute__((section(".data.page_aligned")))
+
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-pgd_t swapper_pg_dir[PTRS_PER_PGD];
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
 
 struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
 
 /*
  * Cache of MMU context last used.
  */
 unsigned long mmu_context_cache = NO_CONTEXT;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, cached = 0;
-	int slab = 0, free = 0, shared = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		struct page *page, *end;
-
-		page = pgdat->node_mem_map;
-		end = page + pgdat->node_spanned_pages;
-
-		do {
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-			page++;
-		} while (page < end);
-	}
-
-	printk ("%d pages of RAM\n", total);
-	printk ("%d free pages\n", free);
-	printk ("%d reserved pages\n", reserved);
-	printk ("%d slab pages\n", slab);
-	printk ("%d pages shared\n", shared);
-	printk ("%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  *
@@ -106,27 +71,16 @@ void __init paging_init(void)
 	zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0),
 						 PAGE_SIZE);
 
-	{
-		pgd_t *pg_dir;
-		int i;
-
-		pg_dir = swapper_pg_dir;
-		sysreg_write(PTBR, (unsigned long)pg_dir);
-
-		for (i = 0; i < PTRS_PER_PGD; i++)
-			pgd_val(pg_dir[i]) = 0;
-
-		enable_mmu();
-		printk ("CPU: Paging enabled\n");
-	}
+	sysreg_write(PTBR, (unsigned long)swapper_pg_dir);
+	enable_mmu();
+	printk ("CPU: Paging enabled\n");
 
 	for_each_online_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
 		unsigned long zones_size[MAX_NR_ZONES];
 		unsigned long low, start_pfn;
 
-		start_pfn = pgdat->bdata->node_boot_start;
-		start_pfn >>= PAGE_SHIFT;
+		start_pfn = pgdat->bdata->node_min_pfn;
 		low = pgdat->bdata->node_low_pfn;
 
 		memset(zones_size, 0, sizeof(zones_size));
@@ -135,7 +89,7 @@ void __init paging_init(void)
 		printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
 		       nid, start_pfn, low);
 
-		free_area_init_node(nid, pgdat, zones_size, start_pfn, NULL);
+		free_area_init_node(nid, zones_size, start_pfn, NULL);
 
 		printk("Node %u: mem_map starts at %p\n",
 		       pgdat->node_id, pgdat->node_mem_map);
diff --git a/arch/avr32/mm/ioremap.c b/arch/avr32/mm/ioremap.c
index 3437c82434ac..f03b79f0e0ab 100644
--- a/arch/avr32/mm/ioremap.c
+++ b/arch/avr32/mm/ioremap.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/io.h>
 
diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
index cd12edbea9f2..06677be98ffb 100644
--- a/arch/avr32/mm/tlb.c
+++ b/arch/avr32/mm/tlb.c
@@ -11,21 +11,21 @@
 
 #include <asm/mmu_context.h>
 
-#define _TLBEHI_I	0x100
+/* TODO: Get the correct number from the CONFIG1 system register */
+#define NR_TLB_ENTRIES 32
 
-void show_dtlb_entry(unsigned int index)
+static void show_dtlb_entry(unsigned int index)
 {
-	unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
+	u32 tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
 	unsigned long flags;
 
 	local_irq_save(flags);
 	mmucr_save = sysreg_read(MMUCR);
 	tlbehi_save = sysreg_read(TLBEHI);
-	mmucr = mmucr_save & 0x13;
-	mmucr |= index << 14;
+	mmucr = SYSREG_BFINS(DRP, index, mmucr_save);
 	sysreg_write(MMUCR, mmucr);
 
-	asm volatile("tlbr" : : : "memory");
+	__builtin_tlbr();
 	cpu_sync_pipeline();
 
 	tlbehi = sysreg_read(TLBEHI);
@@ -33,15 +33,17 @@ void show_dtlb_entry(unsigned int index)
 
 	printk("%2u: %c %c %02x   %05x %05x %o  %o  %c %c %c %c\n",
 	       index,
-	       (tlbehi & 0x200)?'1':'0',
-	       (tlbelo & 0x100)?'1':'0',
-	       (tlbehi & 0xff),
-	       (tlbehi >> 12), (tlbelo >> 12),
-	       (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
-	       (tlbelo & 0x200)?'1':'0',
-	       (tlbelo & 0x080)?'1':'0',
-	       (tlbelo & 0x001)?'1':'0',
-	       (tlbelo & 0x002)?'1':'0');
+	       SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
+	       SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
+	       SYSREG_BFEXT(ASID, tlbehi),
+	       SYSREG_BFEXT(VPN, tlbehi) >> 2,
+	       SYSREG_BFEXT(PFN, tlbelo) >> 2,
+	       SYSREG_BFEXT(AP, tlbelo),
+	       SYSREG_BFEXT(SZ, tlbelo),
+	       SYSREG_BFEXT(TLBELO_C, tlbelo) ? 'C' : ' ',
+	       SYSREG_BFEXT(B, tlbelo) ? 'B' : ' ',
+	       SYSREG_BFEXT(W, tlbelo) ? 'W' : ' ',
+	       SYSREG_BFEXT(TLBELO_D, tlbelo) ? 'D' : ' ');
 
 	sysreg_write(MMUCR, mmucr_save);
 	sysreg_write(TLBEHI, tlbehi_save);
@@ -54,29 +56,33 @@ void dump_dtlb(void)
 	unsigned int i;
 
 	printk("ID  V G ASID VPN   PFN   AP SZ C B W D\n");
-	for (i = 0; i < 32; i++)
+	for (i = 0; i < NR_TLB_ENTRIES; i++)
 		show_dtlb_entry(i);
 }
 
-static unsigned long last_mmucr;
-
-static inline void set_replacement_pointer(unsigned shift)
+static void update_dtlb(unsigned long address, pte_t pte)
 {
-	unsigned long mmucr, mmucr_save;
+	u32 tlbehi;
+	u32 mmucr;
 
-	mmucr = mmucr_save = sysreg_read(MMUCR);
+	/*
+	 * We're not changing the ASID here, so no need to flush the
+	 * pipeline.
+	 */
+	tlbehi = sysreg_read(TLBEHI);
+	tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
+	tlbehi |= address & MMU_VPN_MASK;
+	tlbehi |= SYSREG_BIT(TLBEHI_V);
+	sysreg_write(TLBEHI, tlbehi);
 
 	/* Does this mapping already exist? */
-	__asm__ __volatile__(
-		"	tlbs\n"
-		"	mfsr %0, %1"
-		: "=r"(mmucr)
-		: "i"(SYSREG_MMUCR));
+	__builtin_tlbs();
+	mmucr = sysreg_read(MMUCR);
 
 	if (mmucr & SYSREG_BIT(MMUCR_N)) {
 		/* Not found -- pick a not-recently-accessed entry */
-		unsigned long rp;
-		unsigned long tlbar = sysreg_read(TLBARLO);
+		unsigned int rp;
+		u32 tlbar = sysreg_read(TLBARLO);
 
 		rp = 32 - fls(tlbar);
 		if (rp == 32) {
@@ -84,30 +90,14 @@ static inline void set_replacement_pointer(unsigned shift)
 			sysreg_write(TLBARLO, -1L);
 		}
 
-		mmucr &= 0x13;
-		mmucr |= (rp << shift);
-
+		mmucr = SYSREG_BFINS(DRP, rp, mmucr);
 		sysreg_write(MMUCR, mmucr);
 	}
 
-	last_mmucr = mmucr;
-}
-
-static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid)
-{
-	unsigned long vpn;
-
-	vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid;
-	sysreg_write(TLBEHI, vpn);
-	cpu_sync_pipeline();
-
-	set_replacement_pointer(14);
-
 	sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK);
 
 	/* Let's go */
-	asm volatile("nop\n\ttlbw" : : : "memory");
-	cpu_sync_pipeline();
+	__builtin_tlbw();
 }
 
 void update_mmu_cache(struct vm_area_struct *vma,
@@ -120,39 +110,40 @@ void update_mmu_cache(struct vm_area_struct *vma,
 		return;
 
 	local_irq_save(flags);
-	update_dtlb(address, pte, get_asid());
+	update_dtlb(address, pte);
 	local_irq_restore(flags);
 }
 
-void __flush_tlb_page(unsigned long asid, unsigned long page)
+static void __flush_tlb_page(unsigned long asid, unsigned long page)
 {
-	unsigned long mmucr, tlbehi;
+	u32 mmucr, tlbehi;
 
-	page |= asid;
-	sysreg_write(TLBEHI, page);
-	cpu_sync_pipeline();
-	asm volatile("tlbs");
+	/*
+	 * Caller is responsible for masking out non-PFN bits in page
+	 * and changing the current ASID if necessary. This means that
+	 * we don't need to flush the pipeline after writing TLBEHI.
+	 */
+	tlbehi = page | asid;
+	sysreg_write(TLBEHI, tlbehi);
+
+	__builtin_tlbs();
 	mmucr = sysreg_read(MMUCR);
 
 	if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
-		unsigned long tlbarlo;
-		unsigned long entry;
+		unsigned int entry;
+		u32 tlbarlo;
 
 		/* Clear the "valid" bit */
-		tlbehi = sysreg_read(TLBEHI);
-		tlbehi &= ~_TLBEHI_VALID;
 		sysreg_write(TLBEHI, tlbehi);
-		cpu_sync_pipeline();
 
 		/* mark the entry as "not accessed" */
-		entry = (mmucr >> 14) & 0x3f;
+		entry = SYSREG_BFEXT(DRP, mmucr);
 		tlbarlo = sysreg_read(TLBARLO);
-		tlbarlo |= (0x80000000 >> entry);
+		tlbarlo |= (0x80000000UL >> entry);
 		sysreg_write(TLBARLO, tlbarlo);
 
 		/* update the entry with valid bit clear */
-		asm volatile("tlbw");
-		cpu_sync_pipeline();
+		__builtin_tlbw();
 	}
 }
 
@@ -190,17 +181,22 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 		local_irq_save(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+
 		if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
 			mm->context = NO_CONTEXT;
 			if (mm == current->mm)
 				activate_context(mm);
 		} else {
-			unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK;
-			unsigned long saved_asid = MMU_NO_ASID;
+			unsigned long asid;
+			unsigned long saved_asid;
+
+			asid = mm->context & MMU_CONTEXT_ASID_MASK;
+			saved_asid = MMU_NO_ASID;
 
 			start &= PAGE_MASK;
 			end += (PAGE_SIZE - 1);
 			end &= PAGE_MASK;
+
 			if (mm != current->mm) {
 				saved_asid = get_asid();
 				set_asid(asid);
@@ -218,33 +214,34 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 }
 
 /*
- * TODO: If this is only called for addresses > TASK_SIZE, we can probably
- * skip the ASID stuff and just use the Global bit...
+ * This function depends on the pages to be flushed having the G
+ * (global) bit set in their pte. This is true for all
+ * PAGE_KERNEL(_RO) pages.
  */
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
 	unsigned long flags;
 	int size;
 
-	local_irq_save(flags);
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 	if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
 		flush_tlb_all();
 	} else {
-		unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK;
-		unsigned long saved_asid = get_asid();
+		unsigned long asid;
+
+		local_irq_save(flags);
+		asid = get_asid();
 
 		start &= PAGE_MASK;
 		end += (PAGE_SIZE - 1);
 		end &= PAGE_MASK;
-		set_asid(asid);
+
 		while (start < end) {
 			__flush_tlb_page(asid, start);
 			start += PAGE_SIZE;
 		}
-		set_asid(saved_asid);
+		local_irq_restore(flags);
 	}
-	local_irq_restore(flags);
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
@@ -280,7 +277,7 @@ static void *tlb_start(struct seq_file *tlb, loff_t *pos)
 {
 	static unsigned long tlb_index;
 
-	if (*pos >= 32)
+	if (*pos >= NR_TLB_ENTRIES)
 		return NULL;
 
 	tlb_index = 0;
@@ -291,7 +288,7 @@ static void *tlb_next(struct seq_file *tlb, void *v, loff_t *pos)
 {
 	unsigned long *index = v;
 
-	if (*index >= 31)
+	if (*index >= NR_TLB_ENTRIES - 1)
 		return NULL;
 
 	++*pos;
@@ -313,16 +310,16 @@ static int tlb_show(struct seq_file *tlb, void *v)
 	if (*index == 0)
 		seq_puts(tlb, "ID  V G ASID VPN   PFN   AP SZ C B W D\n");
 
-	BUG_ON(*index >= 32);
+	BUG_ON(*index >= NR_TLB_ENTRIES);
 
 	local_irq_save(flags);
 	mmucr_save = sysreg_read(MMUCR);
 	tlbehi_save = sysreg_read(TLBEHI);
-	mmucr = mmucr_save & 0x13;
-	mmucr |= *index << 14;
+	mmucr = SYSREG_BFINS(DRP, *index, mmucr_save);
 	sysreg_write(MMUCR, mmucr);
 
-	asm volatile("tlbr" : : : "memory");
+	/* TLBR might change the ASID */
+	__builtin_tlbr();
 	cpu_sync_pipeline();
 
 	tlbehi = sysreg_read(TLBEHI);
@@ -334,16 +331,18 @@ static int tlb_show(struct seq_file *tlb, void *v)
 	local_irq_restore(flags);
 
 	seq_printf(tlb, "%2lu: %c %c %02x   %05x %05x %o  %o  %c %c %c %c\n",
-	       *index,
-	       (tlbehi & 0x200)?'1':'0',
-	       (tlbelo & 0x100)?'1':'0',
-	       (tlbehi & 0xff),
-	       (tlbehi >> 12), (tlbelo >> 12),
-	       (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
-	       (tlbelo & 0x200)?'1':'0',
-	       (tlbelo & 0x080)?'1':'0',
-	       (tlbelo & 0x001)?'1':'0',
-	       (tlbelo & 0x002)?'1':'0');
+		   *index,
+		   SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
+		   SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
+		   SYSREG_BFEXT(ASID, tlbehi),
+		   SYSREG_BFEXT(VPN, tlbehi) >> 2,
+		   SYSREG_BFEXT(PFN, tlbelo) >> 2,
+		   SYSREG_BFEXT(AP, tlbelo),
+		   SYSREG_BFEXT(SZ, tlbelo),
+		   SYSREG_BFEXT(TLBELO_C, tlbelo) ? '1' : '0',
+		   SYSREG_BFEXT(B, tlbelo) ? '1' : '0',
+		   SYSREG_BFEXT(W, tlbelo) ? '1' : '0',
+		   SYSREG_BFEXT(TLBELO_D, tlbelo) ? '1' : '0');
 
 	return 0;
 }
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index efa77f3a30d8..5a097c46bc46 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -845,8 +845,8 @@ config HOTPLUG
 	  plugged into slots found on all modern laptop computers.  Another
 	  example, used on modern desktops as well as laptops, is USB.
 
-	  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-	  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+	  Enable HOTPLUG and build a modular kernel.  Get agent software
+	  (from <http://linux-hotplug.sourceforge.net/>) and install it.
 	  Then your kernel will automatically call out to a user mode "policy
 	  agent" (/sbin/hotplug) to load modules and set up software needed
 	  to use devices as you hotplug them.
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 53c2cd255441..77800dd83e57 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -105,7 +105,7 @@ void cpu_idle(void)
 #endif
 		if (!idle)
 			idle = default_idle;
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 5958eecefcf1..689b69c98ee4 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -323,10 +323,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB800 + 4,
+		.end	= 0x203FB800 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 7cc4864f6aaf..4103a97c1a70 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -65,10 +65,15 @@ static struct platform_device rtc_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x20300000,
-		.end	= 0x20300000 + 8,
+		.end	= 0x20300000 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x20300000 + 4,
+		.end	= 0x20300000 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF10,
 		.end	= IRQ_PF10,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 7d250828dad8..01b63e2ec18f 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -166,10 +166,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB800 + 4,
+		.end	= 0x203FB800 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 1b44e9e6dc3b..8598098c0840 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -194,6 +194,7 @@ static loff_t coreb_lseek(struct file *file, loff_t offset, int origin)
 	return ret;
 }
 
+/* No BKL needed here */
 static int coreb_open(struct inode *inode, struct file *file)
 {
 	spin_lock_irq(&coreb_lock);
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 4aab21f44096..bc240abb8745 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -53,33 +53,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
index 20c83a53caf3..217203014433 100644
--- a/arch/cris/arch-v10/boot/Makefile
+++ b/arch/cris/arch-v10/boot/Makefile
@@ -2,7 +2,6 @@
 # arch/cris/arch-v10/boot/Makefile
 #
 
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 subdir- := compressed rescue
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
index 4a031cb27eb9..08d943ce4be7 100644
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
@@ -2,12 +2,10 @@
 # arch/cris/arch-v10/boot/compressed/Makefile
 #
 
-CC = gcc-cris -melf $(LINUXINCLUDE)
-ccflags-y += -O2
-LD = ld-cris
-ldflags-y += -T $(obj)/decompress.ld
+asflags-y += $(LINUXINCLUDE)
+ccflags-y += -O2 $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
 OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
@@ -21,12 +19,6 @@ $(obj)/decompress.o: $(OBJECTS) FORCE
 $(obj)/decompress.bin: $(obj)/decompress.o FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/head.o: $(obj)/head.S .config
-	@$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-
-$(obj)/misc.o: $(obj)/misc.c .config
-	@$(CC) -D__KERNEL__ -c $< -o $@
-
 $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
 	$(call if_changed,image)
 
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.ld b/arch/cris/arch-v10/boot/compressed/decompress.ld
index 0b0a14fe6177..e80f4594d543 100644
--- a/arch/cris/arch-v10/boot/compressed/decompress.ld
+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
@@ -1,4 +1,5 @@
-OUTPUT_FORMAT(elf32-us-cris)
+/* OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_FORMAT(elf32-cris)
 
 MEMORY 
 	{
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
index 610bdb237553..981fbae84959 100644
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ b/arch/cris/arch-v10/boot/compressed/head.S
@@ -15,77 +15,77 @@
 #define COMMAND_LINE_MAGIC 0x87109563
 
 	;; Exported symbols
-	
-	.globl	_input_data
 
-	
+	.globl	input_data
+
+
 	.text
 
 	nop
 	di
 
 ;; We need to initialze DRAM registers before we start using the DRAM
-	
-	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
+
+	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
 	beq	dram_init_finished
 	nop
-	
+
 #include "../../lib/dram_init.S"
-	
-dram_init_finished:	
-		
+
+dram_init_finished:
+
 	;; Initiate the PA and PB ports
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-	move.b   r0, [R_PORT_PA_DATA]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+	move.b   $r0, [R_PORT_PA_DATA]
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-	move.b   r0, [R_PORT_PA_DIR]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+	move.b   $r0, [R_PORT_PA_DIR]
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-	move.b   r0, [R_PORT_PB_DATA]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+	move.b   $r0, [R_PORT_PB_DATA]
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-	move.b   r0, [R_PORT_PB_DIR]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+	move.b   $r0, [R_PORT_PB_DIR]
 
 	;; Setup the stack to a suitably high address.
 	;; We assume 8 MB is the minimum DRAM in an eLinux
 	;; product and put the sp at the top for now.
 
-	move.d	0x40800000, sp
+	move.d	0x40800000, $sp
 
 	;; Figure out where the compressed piggyback image is
 	;; in the flash (since we wont try to copy it to DRAM
 	;; before unpacking). It is at _edata, but in flash.
 	;; Use (_edata - basse) as offset to the current PC.
-	
-basse:	move.d	pc, r5
-	and.d	0x7fffffff, r5	; strip any non-cache bit
-	subq	2, r5		; compensate for the move.d pc instr
-	move.d	r5, r0		; save for later - flash address of 'basse'
-	add.d	_edata, r5
-	sub.d	basse, r5	; r5 = flash address of '_edata'
-	
+
+basse:	move.d	$pc, $r5
+	and.d	0x7fffffff, $r5	; strip any non-cache bit
+	subq	2, $r5		; compensate for the move.d $pc instr
+	move.d	$r5, $r0		; save for later - flash address of 'basse'
+	add.d	_edata, $r5
+	sub.d	basse, $r5	; $r5 = flash address of '_edata'
+
 	;; Copy text+data to DRAM
-	
-	move.d	basse, r1	; destination
-	move.d	_edata, r2	; end destination
-1:	move.w	[r0+], r3
-	move.w	r3, [r1+]
-	cmp.d	r2, r1
+
+	move.d	basse, $r1	; destination
+	move.d	_edata, $r2	; end destination
+1:	move.w	[$r0+], $r3
+	move.w	$r3, [$r1+]
+	cmp.d	$r2, $r1
 	bcs	1b
 	nop
 
-	move.d	r5, [_input_data] ; for the decompressor
+	move.d	$r5, [input_data] ; for the decompressor
 
 
 	;; Clear the decompressors BSS (between _edata and _end)
-	
-	moveq	0, r0
-	move.d	_edata, r1
-	move.d	_end, r2
-1:	move.w	r0, [r1+]
-	cmp.d	r2, r1
+
+	moveq	0, $r0
+	move.d	_edata, $r1
+	move.d	_end, $r2
+1:	move.w	$r0, [$r1+]
+	cmp.d	$r2, $r1
 	bcs	1b
 	nop
 
@@ -94,16 +94,16 @@ basse:	move.d	pc, r5
 	move.d  $r10, [$r12]
 	move.d	_cmd_line_addr, $r12
 	move.d  $r11, [$r12]
-	
-	;; Do the decompression and save compressed size in _inptr
 
-	jsr	_decompress_kernel
-	
-	;; Put start address of root partition in r9 so the kernel can use it
+	;; Do the decompression and save compressed size in inptr
+
+	jsr	decompress_kernel
+
+	;; Put start address of root partition in $r9 so the kernel can use it
 	;; when mounting from flash
 
-	move.d	[_input_data], r9	; flash address of compressed kernel
-	add.d	[_inptr], r9		; size of compressed kernel
+	move.d	[input_data], $r9	; flash address of compressed kernel
+	add.d	[inptr], $r9		; size of compressed kernel
 
 	;; Restore command line magic and address.
 	move.d  _cmd_line_magic, $r10
@@ -112,12 +112,12 @@ basse:	move.d	pc, r5
 	move.d  [$r11], $r11
 
 	;; Enter the decompressed kernel
-	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
+	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
 	jump	0x40004000	; kernel is linked to this address
-	
+
 	.data
 
-_input_data:
+input_data:
 	.dword	0		; used by the decompressor
 _cmd_line_magic:
 	.dword 0
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
index 9a43ab19391e..d933c89889db 100644
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -29,12 +29,10 @@
 #define OF(args)  args
 #define STATIC static
 
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-	     size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
 
+#define memzero(s, n)     memset((s), 0, (n))
 
 typedef unsigned char  uch;
 typedef unsigned short ush;
@@ -62,79 +60,57 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 
-#define get_byte() inbuf[inptr++]	
-	
+#define get_byte() (inbuf[inptr++])
+
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
 #  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
-static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
 static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
- 
-static void *malloc(int size);
-static void free(void *where);
-static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
- 
 static void puts(const char *);
 
 /* the "heap" is put directly after the BSS ends, at end */
-  
-extern int end;
-static long free_mem_ptr = (long)&end;
- 
-#include "../../../../../lib/inflate.c"
-
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
 
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
+extern int _end;
+static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
+#include "../../../../../lib/inflate.c"
 
 /* decompressor info and error messages to serial console */
 
@@ -142,44 +118,47 @@ static void
 puts(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while(*s) {
+	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
-		while(!(*R_SERIAL0_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
 		*R_SERIAL0_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
-		while(!(*R_SERIAL1_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
 		*R_SERIAL1_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
-		while(!(*R_SERIAL2_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
 		*R_SERIAL2_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
-		while(!(*R_SERIAL3_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
 		*R_SERIAL3_TR_DATA = *s++;
 #endif
 	}
 #endif
 }
 
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
 	int i;
-	char *ss = (char*)s;
+	char *ss = (char *)s;
 
-	for (i=0;i<n;i++) ss[i] = c;
+	for (i = 0; i < n; i++)
+		ss[i] = c;
+
+	return s;
 }
 
-void*
-memcpy(void* __dest, __const void* __src,
-			    size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i;
 	char *d = (char *)__dest, *s = (char *)__src;
 
-	for (i=0;i<__n;i++) d[i] = s[i];
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
+
+	return __dest;
 }
 
 /* ===========================================================================
@@ -187,46 +166,44 @@ memcpy(void* __dest, __const void* __src,
  * (Used for the decompressed data only.)
  */
 
-static void
-flush_window()
+static void flush_window(void)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-    
-    in = window;
-    out = &output_data[output_ptr]; 
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
 }
 
-static void
-error(char *x)
+static void error(char *x)
 {
 	puts("\n\n");
 	puts(x);
 	puts("\n\n -- System halted\n");
 
-	while(1);	/* Halt */
+	while (1);	/* Halt */
 }
 
-void
-setup_normal_output_buffer()
+void setup_normal_output_buffer(void)
 {
 	output_data = (char *)KERNEL_LOAD_ADR;
 }
 
-void
-decompress_kernel()
+void decompress_kernel(void)
 {
 	char revision;
-	
+
 	/* input_data is set in head.S */
 	inbuf = input_data;
 
@@ -257,11 +234,10 @@ decompress_kernel()
 
 	makecrc();
 
-	__asm__ volatile ("move vr,%0" : "=rm" (revision));
-	if (revision < 10)
-	{
+	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
+	if (revision < 10) {
 		puts("You need an ETRAX 100LX to run linux 2.6\n");
-		while(1);
+		while (1);
 	}
 
 	puts("Uncompressing Linux...\n");
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
index 2e5045b9e19c..07688da92708 100644
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ b/arch/cris/arch-v10/boot/rescue/Makefile
@@ -2,12 +2,9 @@
 # Makefile for rescue (bootstrap) code
 #
 
-CC = gcc-cris -mlinux $(LINUXINCLUDE)
-ccflags-y += -O2
-asflags-y += -traditional
-LD = gcc-cris -mlinux -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
-OBJCOPY = objcopy-cris
+ccflags-y += -O2 $(LINUXINCLUDE)
+asflags-y += $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
 OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index f1cac9dc75b8..1f2ae909d3e6 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/smp_lock.h>
 #include <linux/wait.h>
 #include <asm/uaccess.h>
 #include "i2c.h"
@@ -375,10 +376,9 @@ int __init eeprom_init(void)
 }
 
 /* Opens the device. */
-
 static int eeprom_open(struct inode * inode, struct file * file)
 {
-
+  cycle_kernel_lock();
   if(iminor(inode) != EEPROM_MINOR_NR)
      return -ENXIO;
   if(imajor(inode) != EEPROM_MAJOR_NR)
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
index 68a998bd1069..86048e697eb5 100644
--- a/arch/cris/arch-v10/drivers/gpio.c
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/poll.h>
 #include <linux/init.h>
@@ -323,6 +324,7 @@ gpio_open(struct inode *inode, struct file *filp)
 	if (!priv)
 		return -ENOMEM;
 
+	lock_kernel();
 	priv->minor = p;
 
 	/* initialize the io/alarm struct */
@@ -357,6 +359,7 @@ gpio_open(struct inode *inode, struct file *filp)
 	alarmlist = priv;
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
+	unlock_kernel();
 	return 0;
 }
 
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index d6d22067d0c8..2797e67ce4f4 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
@@ -566,6 +567,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 static int
 i2c_open(struct inode *inode, struct file *filp)
 {
+	cycle_kernel_lock();
 	return 0;
 }
 
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 52103d16dc6c..8769dc914073 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -233,7 +233,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 
 		if (copy_to_user((struct rtc_time *) arg, &tm,
 				 sizeof tm)) {
-			spin_unlock(&rtc_lock);
+			mutex_unlock(&rtc_lock);
 			return -EFAULT;
 		}
 
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 069546e342c5..91fea623c7c9 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/poll.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <asm/irq.h>
 #include <asm/dma.h>
@@ -443,18 +444,21 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 	int dev = MINOR(inode->i_rdev);
 	struct sync_port *port;
 	int mode;
+	int err = -EBUSY;
 
+	lock_kernel();
 	DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev));
 
 	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
 		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
-		return -ENODEV;
+		err = -ENODEV;
+		goto out;
 	}
 	port = &ports[dev];
 	/* Allow open this device twice (assuming one reader and one writer) */
 	if (port->busy == 2) {
 		DEBUG(printk(KERN_DEBUG "Device is busy.. \n"));
-		return -EBUSY;
+		goto out;
 	}
 	if (port->init_irqs) {
 		if (port->use_dma) {
@@ -465,14 +469,14 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						&ports[0])) {
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial port 1 IRQ");
-					return -EBUSY;
+					goto out;
 				} else if (request_irq(25, rx_interrupt, 0,
 						"synchronous serial 1 dma rx",
 						&ports[0])) {
 					free_irq(24, &port[0]);
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial port 1 IRQ");
-					return -EBUSY;
+					goto out;
 				} else if (cris_request_dma(8,
 						"synchronous serial 1 dma tr",
 						DMA_VERBOSE_ON_ERROR,
@@ -482,7 +486,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial port 1 "
 						"TX DMA channel");
-					return -EBUSY;
+					goto out;
 				} else if (cris_request_dma(9,
 						"synchronous serial 1 dma rec",
 						DMA_VERBOSE_ON_ERROR,
@@ -493,7 +497,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial port 1 "
 						"RX DMA channel");
-					return -EBUSY;
+					goto out;
 				}
 #endif
 				RESET_DMA(8); WAIT_DMA(8);
@@ -520,14 +524,14 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						&ports[1])) {
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial port 3 IRQ");
-					return -EBUSY;
+					goto out;
 				} else if (request_irq(21, rx_interrupt, 0,
 						"synchronous serial 3 dma rx",
 						&ports[1])) {
 					free_irq(20, &ports[1]);
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial port 3 IRQ");
-					return -EBUSY;
+					goto out;
 				} else if (cris_request_dma(4,
 						"synchronous serial 3 dma tr",
 						DMA_VERBOSE_ON_ERROR,
@@ -537,7 +541,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial port 3 "
 						"TX DMA channel");
-					return -EBUSY;
+					goto out;
 				} else if (cris_request_dma(5,
 						"synchronous serial 3 dma rec",
 						DMA_VERBOSE_ON_ERROR,
@@ -548,7 +552,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial port 3 "
 						"RX DMA channel");
-					return -EBUSY;
+					goto out;
 				}
 #endif
 				RESET_DMA(4); WAIT_DMA(4);
@@ -581,7 +585,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						&ports[0])) {
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial manual irq");
-					return -EBUSY;
+					goto out;
 				}
 			} else if (port == &ports[1]) {
 				if (request_irq(8,
@@ -591,7 +595,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						&ports[1])) {
 					printk(KERN_CRIT "Can't alloc "
 						"sync serial manual irq");
-					return -EBUSY;
+					goto out;
 				}
 			}
 			port->init_irqs = 0;
@@ -620,7 +624,11 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 			*R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
 		DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev));
 	}
-	return 0;
+	ret = 0;
+	
+out:
+	unlock_kernel();
+	return ret;
 }
 
 static int sync_serial_release(struct inode *inode, struct file *file)
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
index 04d5eee2c90c..3dc6e91ba39e 100644
--- a/arch/cris/arch-v10/kernel/debugport.c
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -426,12 +426,18 @@ static int dummy_write(struct tty_struct * tty,
 	return count;
 }
 
-static int
-dummy_write_room(struct tty_struct *tty)
+static int dummy_write_room(struct tty_struct *tty)
 {
 	return 8192;
 }
 
+static const struct tty_operations dummy_ops = {
+	.open = dummy_open,
+	.close = dummy_close,
+	.write = dummy_write,
+	.write_room = dummy_write_room,
+};
+
 void __init
 init_dummy_console(void)
 {
@@ -444,14 +450,14 @@ init_dummy_console(void)
 	dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
 	dummy_driver.subtype = SERIAL_TYPE_NORMAL;
 	dummy_driver.init_termios = tty_std_termios;
+	/* Normally B9600 default... */
 	dummy_driver.init_termios.c_cflag =
-		B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+		B115200 | CS8 | CREAD | HUPCL | CLOCAL;
 	dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	dummy_driver.init_termios.c_ispeed = 115200;
+	dummy_driver.init_termios.c_ospeed = 115200;
 
-	dummy_driver.open = dummy_open;
-	dummy_driver.close = dummy_close;
-	dummy_driver.write = dummy_write;
-	dummy_driver.write_room = dummy_write_room;
+	dummy_driver.ops = &dummy_ops;
 	if (tty_register_driver(&dummy_driver))
 		panic("Couldn't register dummy serial driver\n");
 }
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index a3ca55150745..6fea45f2e40c 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -278,14 +278,6 @@ void putDebugChar (int val);
 
 void enableDebugIRQ (void);
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex (int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex (int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex (char ch);
 
@@ -356,9 +348,6 @@ extern unsigned char executing_task;
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char remcomInBuffer[BUFMAX];
 static char remcomOutBuffer[BUFMAX];
@@ -499,8 +488,8 @@ gdb_cris_strtol (const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 	
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
         
         if (endptr)
         {
@@ -670,22 +659,6 @@ read_register (char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex (char ch)
@@ -721,8 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
                 for (i = 0; i < count; i++) {
                         ch = *mem++;
-                        *buf++ = highhex (ch);
-                        *buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
                 }
         }
         
@@ -857,9 +829,9 @@ putpacket(char *buffer)
 				src++;
 			}
 		}
-		putDebugChar ('#');
-		putDebugChar (highhex (checksum));
-		putDebugChar (lowhex (checksum));
+		putDebugChar('#');
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -895,9 +867,8 @@ stub_is_stopped(int sigval)
         
 	/* Send trap type (converted to signal) */
 
-	*ptr++ = 'T';	
-	*ptr++ = highhex (sigval);
-	*ptr++ = lowhex (sigval);
+	*ptr++ = 'T';
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send register contents. We probably only need to send the
 	 * PC, frame pointer and stack pointer here. Other registers will be
@@ -910,9 +881,7 @@ stub_is_stopped(int sigval)
                 status = read_register (regno, &reg_cont);
                 
 		if (status == SUCCESS) {
-                        
-                        *ptr++ = highhex (regno);
-                        *ptr++ = lowhex (regno);
+			ptr = pack_hex_byte(ptr, regno);
                         *ptr++ = ':';
 
                         ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
@@ -937,8 +906,8 @@ stub_is_stopped(int sigval)
 	/* Store thread:r...; with the executing task TID. */
 	gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:");
 	pos += gdb_cris_strlen ("thread:");
-	remcomOutBuffer[pos++] = highhex (executing_task);
-	remcomOutBuffer[pos++] = lowhex (executing_task);
+	remcomOutBuffer[pos++] = hex_asc_hi(executing_task);
+	remcomOutBuffer[pos++] = hex_asc_lo(executing_task);
 	gdb_cris_strcpy (&remcomOutBuffer[pos], ";");
 #endif
 
@@ -1126,8 +1095,8 @@ handle_exception (int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				remcomOutBuffer[0] = 'S';
-				remcomOutBuffer[1] = highhex (sigval);
-				remcomOutBuffer[2] = lowhex (sigval);
+				remcomOutBuffer[1] = hex_asc_hi(sigval);
+				remcomOutBuffer[2] = hex_asc_lo(sigval);
 				remcomOutBuffer[3] = 0;
 				break;
 				
@@ -1224,23 +1193,23 @@ handle_exception (int sigval)
 						case 'C':
 							/* Identify the remote current thread. */
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QC");
-							remcomOutBuffer[2] = highhex (current_thread_c);
-							remcomOutBuffer[3] = lowhex (current_thread_c);
+							remcomOutBuffer[2] = hex_asc_hi(current_thread_c);
+							remcomOutBuffer[3] = hex_asc_lo(current_thread_c);
 							remcomOutBuffer[4] = '\0';
 							break;
 						case 'L':
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QM");
 							/* Reply with number of threads. */
 							if (os_is_started()) {
-								remcomOutBuffer[2] = highhex (number_of_tasks);
-								remcomOutBuffer[3] = lowhex (number_of_tasks);
+								remcomOutBuffer[2] = hex_asc_hi(number_of_tasks);
+								remcomOutBuffer[3] = hex_asc_lo(number_of_tasks);
 							}
 							else {
-								remcomOutBuffer[2] = highhex (0);
-								remcomOutBuffer[3] = lowhex (1);
+								remcomOutBuffer[2] = hex_asc_hi(0);
+								remcomOutBuffer[3] = hex_asc_lo(1);
 							}
 							/* Done with the reply. */
-							remcomOutBuffer[4] = lowhex (1);
+							remcomOutBuffer[4] = hex_asc_lo(1);
 							pos = 5;
 							/* Expects the argument thread id. */
 							for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++)
@@ -1251,16 +1220,16 @@ handle_exception (int sigval)
 								for (thread_id = 0; thread_id < number_of_tasks; thread_id++) {
 									nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 									for (; pos < nextpos; pos ++)
-										remcomOutBuffer[pos] = lowhex (0);
-									remcomOutBuffer[pos++] = lowhex (thread_id);
+										remcomOutBuffer[pos] = hex_asc_lo(0);
+									remcomOutBuffer[pos++] = hex_asc_lo(thread_id);
 								}
 							}
 							else {
 								/* Store the thread identifier of the boot task. */
 								nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 								for (; pos < nextpos; pos ++)
-									remcomOutBuffer[pos] = lowhex (0);
-								remcomOutBuffer[pos++] = lowhex (current_thread_c);
+									remcomOutBuffer[pos] = hex_asc_lo(0);
+								remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c);
 							}
 							remcomOutBuffer[pos] = '\0';
 							break;
diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c
index e0fcd1a9bfd5..742fd1974c2e 100644
--- a/arch/cris/arch-v10/mm/init.c
+++ b/arch/cris/arch-v10/mm/init.c
@@ -182,7 +182,7 @@ paging_init(void)
 	 * mem_map page array.
 	 */
 
-	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 }
 
 /* Initialize remaps of some I/O-ports. It is important that this
diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile
index 3f91349c5f12..99896ad60b30 100644
--- a/arch/cris/arch-v32/boot/Makefile
+++ b/arch/cris/arch-v32/boot/Makefile
@@ -2,7 +2,6 @@
 # arch/cris/arch-v32/boot/Makefile
 #
 
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary -R .note -R .comment
 
 subdir- := compressed rescue
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
index 2c8c2c3039c5..d6335f26083b 100644
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ b/arch/cris/arch-v32/boot/compressed/Makefile
@@ -2,14 +2,10 @@
 # arch/cris/arch-v32/boot/compressed/Makefile
 #
 
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
 asflags-y += -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
 ccflags-y += -O2 -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/decompress.ld
-obj-y = head.o misc.o
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
 OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
index 55b2695c5d70..3595e16e82bc 100644
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/arch-v32/boot/compressed/misc.c
@@ -89,20 +89,14 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
-static long bytes_out = 0;
+static long bytes_out;
 static uch *output_data;
-static unsigned long output_ptr = 0;
+static unsigned long output_ptr;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -110,37 +104,10 @@ static void puts(const char *);
 
 extern int _end;
 static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
 #include "../../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* decompressor info and error messages to serial console */
 
 static inline void
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
index c0987795dcb7..44ae0ad61f90 100644
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ b/arch/cris/arch-v32/boot/rescue/Makefile
@@ -7,9 +7,8 @@ ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
 		-I $(srctree)/include/asm/arch
 asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
 LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
 LDPOSTFLAGS = -lgcc
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
 OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index 9fb58202be99..67c61ea86813 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -11,6 +11,7 @@
 #include <linux/string.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
+#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/stddef.h>
 
@@ -2302,11 +2303,11 @@ static int cryptocop_job_setup(struct cryptocop_prio_job **pj, struct cryptocop_
 	return 0;
 }
 
-
 static int cryptocop_open(struct inode *inode, struct file *filp)
 {
 	int p = iminor(inode);
 
+	cycle_kernel_lock();
 	if (p != CRYPTOCOP_MINOR) return -EINVAL;
 
 	filp->private_data = NULL;
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
index c2fb7a5c1396..179e7b804331 100644
--- a/arch/cris/arch-v32/drivers/i2c.c
+++ b/arch/cris/arch-v32/drivers/i2c.c
@@ -33,6 +33,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 
 #include <asm/etraxi2c.h>
 
@@ -636,6 +637,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 static int
 i2c_open(struct inode *inode, struct file *filp)
 {
+	cycle_kernel_lock();
 	return 0;
 }
 
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
index de107dad9f4f..ef98608e5067 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/smp_lock.h>
 
 #include <asm/etraxgpio.h>
 #include <hwregs/reg_map.h>
@@ -390,6 +391,8 @@ static int gpio_open(struct inode *inode, struct file *filp)
 
 	if (!priv)
 		return -ENOMEM;
+
+	lock_kernel();
 	memset(priv, 0, sizeof(*priv));
 
 	priv->minor = p;
@@ -412,6 +415,7 @@ static int gpio_open(struct inode *inode, struct file *filp)
 		spin_unlock_irq(&gpio_lock);
 	}
 
+	unlock_kernel();
 	return 0;
 }
 
diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
index 7863fd4efc2b..fe1fde893887 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/smp_lock.h>
 
 #include <asm/etraxgpio.h>
 #include <hwregs/reg_map.h>
@@ -426,9 +427,10 @@ gpio_open(struct inode *inode, struct file *filp)
 		return -EINVAL;
 
 	priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
-
 	if (!priv)
 		return -ENOMEM;
+
+	lock_kernel();
 	memset(priv, 0, sizeof(*priv));
 
 	priv->minor = p;
@@ -449,6 +451,7 @@ gpio_open(struct inode *inode, struct file *filp)
 	alarmlist = priv;
 	spin_unlock_irq(&alarm_lock);
 
+	unlock_kernel();
 	return 0;
 }
 
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index 53db3870ba04..f263ab571221 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -229,7 +229,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 
 		if (copy_to_user((struct rtc_time *) arg, &tm,
 				 sizeof tm)) {
-			spin_unlock(&rtc_lock);
+			mutex_unlock(&rtc_lock);
 			return -EFAULT;
 		}
 
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index 47c377df6fb3..d2a0fbf5341f 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -14,6 +14,7 @@
 #include <linux/major.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/poll.h>
 #include <linux/init.h>
@@ -429,23 +430,26 @@ static inline int sync_data_avail_to_end(struct sync_port *port)
 static int sync_serial_open(struct inode *inode, struct file *file)
 {
 	int dev = iminor(inode);
+	int ret = -EBUSY;
 	sync_port *port;
 	reg_dma_rw_cfg cfg = {.en = regk_dma_yes};
 	reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
 
+	lock_kernel();
 	DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev));
 
 	if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled)
 	{
 		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out;
 	}
 	port = &ports[dev];
 	/* Allow open this device twice (assuming one reader and one writer) */
 	if (port->busy == 2)
 	{
 		DEBUG(printk(KERN_DEBUG "Device is busy.. \n"));
-		return -EBUSY;
+		goto out;
 	}
 
 
@@ -459,7 +463,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						"synchronous serial 0 dma tr",
 						&ports[0])) {
 					printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ");
-					return -EBUSY;
+					goto out;
 				} else if (request_irq(DMA_IN_INTR_VECT,
 						rx_interrupt,
 						0,
@@ -467,7 +471,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						&ports[0])) {
 					free_irq(DMA_OUT_INTR_VECT, &port[0]);
 					printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ");
-					return -EBUSY;
+					goto out;
 				} else if (crisv32_request_dma(OUT_DMA_NBR,
 						"synchronous serial 0 dma tr",
 						DMA_VERBOSE_ON_ERROR,
@@ -476,7 +480,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 					free_irq(DMA_OUT_INTR_VECT, &port[0]);
 					free_irq(DMA_IN_INTR_VECT, &port[0]);
 					printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel");
-					return -EBUSY;
+					goto out;
 				} else if (crisv32_request_dma(IN_DMA_NBR,
 						"synchronous serial 0 dma rec",
 						DMA_VERBOSE_ON_ERROR,
@@ -486,7 +490,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 					free_irq(DMA_OUT_INTR_VECT, &port[0]);
 					free_irq(DMA_IN_INTR_VECT, &port[0]);
 					printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel");
-					return -EBUSY;
+					goto out;
 				}
 #endif
 			}
@@ -499,7 +503,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						"synchronous serial 1 dma tr",
 						&ports[1])) {
 					printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ");
-					return -EBUSY;
+					goto out;
 				} else if (request_irq(DMA7_INTR_VECT,
 						       rx_interrupt,
 						       0,
@@ -507,7 +511,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						       &ports[1])) {
 					free_irq(DMA6_INTR_VECT, &ports[1]);
 					printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ");
-					return -EBUSY;
+					goto out;
 				} else if (crisv32_request_dma(
 						SYNC_SER1_TX_DMA_NBR,
 						"synchronous serial 1 dma tr",
@@ -517,7 +521,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 					free_irq(DMA6_INTR_VECT, &ports[1]);
 					free_irq(DMA7_INTR_VECT, &ports[1]);
 					printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel");
-					return -EBUSY;
+					goto out;
 				} else if (crisv32_request_dma(
 						SYNC_SER1_RX_DMA_NBR,
 						"synchronous serial 3 dma rec",
@@ -528,7 +532,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 					free_irq(DMA6_INTR_VECT, &ports[1]);
 					free_irq(DMA7_INTR_VECT, &ports[1]);
 					printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel");
-					return -EBUSY;
+					goto out;
 				}
 #endif
 			}
@@ -554,7 +558,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						"synchronous serial manual irq",
 						&ports[0])) {
 					printk("Can't allocate sync serial manual irq");
-					return -EBUSY;
+					goto out;
 				}
 			}
 #ifdef CONFIG_ETRAXFS
@@ -565,7 +569,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 						"synchronous serial manual irq",
 						&ports[1])) {
 					printk(KERN_CRIT "Can't allocate sync serial manual irq");
-					return -EBUSY;
+					goto out;
 				}
 			}
 #endif
@@ -578,7 +582,10 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 	} /* port->init_irqs */
 
 	port->busy++;
-	return 0;
+	ret = 0;
+out:
+	unlock_kernel();
+	return ret;
 }
 
 static int sync_serial_release(struct inode *inode, struct file *file)
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index 4e2e2e271efb..8bd5a5bc0dc7 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -398,14 +398,6 @@ void putDebugChar(int val)
 }
 #endif
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex(int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex(int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex(char ch);
 
@@ -464,9 +456,6 @@ void breakpoint(void);
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char input_buffer[BUFMAX];
 static char output_buffer[BUFMAX];
@@ -550,8 +539,8 @@ gdb_cris_strtol(const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
 
         if (endptr) {
                 /* Unconverted suffix is stored in endptr unless endptr is NULL. */
@@ -655,22 +644,6 @@ read_register(char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex(char ch)
@@ -704,8 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
 		for (i = 0; i < count; i++) {
 			ch = *mem++;
-			*buf++ = highhex (ch);
-			*buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
 		}
         }
         /* Terminate properly. */
@@ -723,8 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count)
 	mem += count - 1;
 	for (i = 0; i < count; i++) {
 		ch = *mem--;
-		*buf++ = highhex (ch);
-		*buf++ = lowhex (ch);
+		buf = pack_hex_byte(buf, ch);
         }
 
         /* Terminate properly. */
@@ -862,8 +833,8 @@ putpacket(char *buffer)
 			}
 		}
 		putDebugChar('#');
-		putDebugChar(highhex (checksum));
-		putDebugChar(lowhex (checksum));
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -909,8 +880,7 @@ stub_is_stopped(int sigval)
 	/* Send trap type (converted to signal) */
 
 	*ptr++ = 'T';
-	*ptr++ = highhex(sigval);
-	*ptr++ = lowhex(sigval);
+	ptr = pack_hex_byte(ptr, sigval);
 
 	if (((reg.exs & 0xff00) >> 8) == 0xc) {
 
@@ -1018,30 +988,26 @@ stub_is_stopped(int sigval)
 	}
 	/* Only send PC, frame and stack pointer. */
 	read_register(PC, &reg_cont);
-	*ptr++ = highhex(PC);
-	*ptr++ = lowhex(PC);
+	ptr = pack_hex_byte(PC);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
 	*ptr++ = ';';
 
 	read_register(R8, &reg_cont);
-	*ptr++ = highhex(R8);
-	*ptr++ = lowhex(R8);
+	ptr = pack_hex_byte(R8);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
 	*ptr++ = ';';
 
 	read_register(SP, &reg_cont);
-	*ptr++ = highhex(SP);
-	*ptr++ = lowhex(SP);
+	ptr = pack_hex_byte(SP);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
 	*ptr++ = ';';
 
 	/* Send ERP as well; this will save us an entire register fetch in some cases. */
         read_register(ERP, &reg_cont);
-        *ptr++ = highhex(ERP);
-        *ptr++ = lowhex(ERP);
+	ptr = pack_hex_byte(ERP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
         *ptr++ = ';';
@@ -1533,8 +1499,8 @@ handle_exception(int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				output_buffer[0] = 'S';
-				output_buffer[1] = highhex(sigval);
-				output_buffer[2] = lowhex(sigval);
+				output_buffer[1] = hex_asc_hi(sigval);
+				output_buffer[2] = hex_asc_lo(sigval);
 				output_buffer[3] = 0;
 				break;
 
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index a9c3334e46c9..952a24b2f5a9 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -194,7 +194,7 @@ void stop_this_cpu(void* dummy)
 /* Other calls */
 void smp_send_stop(void)
 {
-	smp_call_function(stop_this_cpu, NULL, 1, 0);
+	smp_call_function(stop_this_cpu, NULL, 0);
 }
 
 int setup_profiling_timer(unsigned int multiplier)
@@ -316,8 +316,7 @@ int send_ipi(int vector, int wait, cpumask_t cpu_mask)
  * You must not call this function with disabled interrupts or from a
  * hardware interrupt handler or from a bottom half handler.
  */
-int smp_call_function(void (*func)(void *info), void *info,
-		      int nonatomic, int wait)
+int smp_call_function(void (*func)(void *info), void *info, int wait)
 {
 	cpumask_t cpu_mask = CPU_MASK_ALL;
 	struct call_data_struct data;
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index 5a9ac5834647..8a34b8b74293 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -162,7 +162,7 @@ paging_init(void)
 	 * substantially higher than 0, like us (we start at PAGE_OFFSET). This
 	 * saves space in the mem_map page array.
 	 */
-	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 
 	mem_map = contig_page_data.node_mem_map;
 }
diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c
index 44f7b4f79476..9aa571169bcc 100644
--- a/arch/cris/kernel/profile.c
+++ b/arch/cris/kernel/profile.c
@@ -35,19 +35,16 @@ read_cris_profile(struct file *file, char __user *buf,
 		  size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
+	ssize_t ret;
 
-	if (p > SAMPLE_BUFFER_SIZE)
-		return 0;
+	ret = simple_read_from_buffer(buf, count, ppos, sample_buffer,
+						SAMPLE_BUFFER_SIZE);
+	if (ret < 0)
+		return ret;
 
-	if (p + count > SAMPLE_BUFFER_SIZE)
-		count = SAMPLE_BUFFER_SIZE - p;
-	if (copy_to_user(buf, sample_buffer + p,count))
-		return -EFAULT;
+	memset(sample_buffer + p, 0, ret);
 
-	memset(sample_buffer + p, 0, count);
-	*ppos += count;
-
-	return count;
+	return ret;
 }
 
 static ssize_t
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index 5b06ffa15e34..2fdd212eb250 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -19,36 +19,6 @@ unsigned long empty_zero_page;
 extern char _stext, _edata, _etext; /* From linkerscript */
 extern char __init_begin, __init_end;
 
-void 
-show_mem(void)
-{
-	int i,free = 0,total = 0,cached = 0, reserved = 0, nonshared = 0;
-	int shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else if (page_count(mem_map+i) == 1)
-			nonshared++;
-		else
-			shared += page_count(mem_map+i) - 1;
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages nonshared\n",nonshared);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 void __init
 mem_init(void)
 {
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 48a0393e7cee..7ca8a6b19ac9 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -182,8 +182,6 @@ extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_excep
 static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 static const char *regnames[] = {
 	"PSR ", "ISR ", "CCR ", "CCCR",
 	"LR  ", "LCR ", "PC  ", "_stt",
@@ -383,8 +381,8 @@ static int gdbstub_send_packet(char *buffer)
 		}
 
 		gdbstub_tx_char('#');
-		gdbstub_tx_char(hexchars[checksum >> 4]);
-		gdbstub_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_tx_char(hex_asc_hi(checksum));
+		gdbstub_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_rx_char(&ch,0),
 #ifdef GDBSTUB_DEBUG_PROTOCOL
@@ -674,8 +672,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&1 && count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -683,10 +680,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&3 && count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -694,14 +689,10 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	while (count>=4) {
 		if (!gdbstub_read_dword(mem,(uint32_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -709,10 +700,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -720,8 +709,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1471,22 +1459,22 @@ void gdbstub(int sigval)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1,0);
 
-		hx = hexchars[(brr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1500,12 +1488,10 @@ void gdbstub(int sigval)
 
 	/* Send trap type (converted to signal) */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send Error PC */
-	*ptr++ = hexchars[GDB_REG_PC >> 4];
-	*ptr++ = hexchars[GDB_REG_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1513,8 +1499,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_FP >> 4];
-	*ptr++ = hexchars[GDB_REG_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1522,8 +1507,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send stack pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_SP >> 4];
-	*ptr++ = hexchars[GDB_REG_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1548,8 +1532,8 @@ void gdbstub(int sigval)
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -2059,8 +2043,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_tx_char('#');
-	gdbstub_tx_char(hexchars[checksum >> 4]);
-	gdbstub_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_tx_char(hex_asc_hi(checksum));
+	gdbstub_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_tx_char('-');
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index 73f3aeefd203..d1113c5031f5 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/sysctl.h>
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 4f165c93be42..edae117fcc2b 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -19,36 +19,6 @@
 
 #include "pci-frv.h"
 
-#if 0
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			struct resource *res, int resource)
-{
-	u32 new, check;
-	int reg;
-
-	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-	if (resource < 6) {
-		reg = PCI_BASE_ADDRESS_0 + 4*resource;
-	} else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-		new |= PCI_ROM_ADDRESS_ENABLE;
-		reg = dev->rom_base_reg;
-	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
-		return;
-	}
-
-	pci_write_config_dword(dev, reg, new);
-	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-		       new, check);
-	}
-}
-#endif
-
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 9af7740f32fb..1b851db34186 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -63,37 +63,6 @@ EXPORT_SYMBOL(empty_zero_page);
 
 /*****************************************************************************/
 /*
- *
- */
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		struct page *page = &mem_map[i];
-
-		total++;
-		if (PageReserved(page))
-			reserved++;
-		else if (!page_count(page))
-			free++;
-		else
-			shared += page_count(page) - 1;
-	}
-
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-
-} /* end show_mem() */
-
-/*****************************************************************************/
-/*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
  * The parameters are pointers to where to stick the starting and ending
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 085dc6ec152b..396ab059efa3 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -203,20 +203,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 source "drivers/char/pcmcia/Kconfig"
 
 source "drivers/serial/Kconfig"
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
index 845074588af0..51ab6cbd030f 100644
--- a/arch/h8300/boot/compressed/misc.c
+++ b/arch/h8300/boot/compressed/misc.c
@@ -67,8 +67,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -77,11 +75,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -98,38 +92,6 @@ static unsigned long free_mem_end_ptr;
 #define TDR *((volatile unsigned char *)0xffff8b)
 #define SSR *((volatile unsigned char *)0xffff8c)
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 int puts(const char *s)
 {
 	return 0;
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index b1f25c20a5db..7fda657110eb 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/fb.h>
 #include <linux/console.h>
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index e4f4199f97ab..a1d228f5e4e6 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -64,33 +64,6 @@ unsigned long empty_zero_page;
 
 extern unsigned long rom_length;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk("\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk("%d pages of RAM\n",total);
-    printk("%d free pages\n",free);
-    printk("%d reserved pages\n",reserved);
-    printk("%d pages shared\n",shared);
-    printk("%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 16be41446b5b..451f2ffb137b 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -303,6 +303,7 @@ config VIRT_CPU_ACCOUNTING
 
 config SMP
 	bool "Symmetric multi-processing support"
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N.  If you have a system with more
@@ -539,8 +540,8 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	  bool "kernel crash dumps (EXPERIMENTAL)"
-	  depends on EXPERIMENTAL && IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+	  bool "kernel crash dumps"
+	  depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
 	  help
 	    Generate crash dump after being started by kexec.
 
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index e67ee3f27698..905d25b13d5a 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -100,3 +100,9 @@ define archhelp
   echo '  boot		- Build vmlinux and bootloader for Ski simulator'
   echo '* unwcheck	- Check vmlinux for invalid unwind info'
 endef
+
+archprepare: make_nr_irqs_h FORCE
+PHONY += make_nr_irqs_h FORCE
+
+make_nr_irqs_h: FORCE
+	$(Q)$(MAKE) $(build)=arch/ia64/kernel include/asm-ia64/nr-irqs.h
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 1c44ec2a1d58..88b6e6f3fd88 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -186,9 +186,10 @@ hwsw_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-hwsw_dma_mapping_error (dma_addr_t dma_addr)
+hwsw_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return hwiommu_dma_mapping_error (dma_addr) || swiotlb_dma_mapping_error(dma_addr);
+	return hwiommu_dma_mapping_error(dev, dma_addr) ||
+		swiotlb_dma_mapping_error(dev, dma_addr);
 }
 
 EXPORT_SYMBOL(hwsw_dma_mapping_error);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 34421aed1e2a..4956be40d7b5 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2147,7 +2147,7 @@ sba_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-sba_dma_mapping_error (dma_addr_t dma_addr)
+sba_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 23cafc80d2a4..24b1ad5334cb 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -193,18 +193,6 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
  * -------------------------------------------------------------------
  */
 
-#if 0
-/*
- * not really used in our situation so keep them commented out for now
- */
-static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
-static void do_serial_bh(void)
-{
-	run_task_queue(&tq_serial);
-	printk(KERN_ERR "do_serial_bh: called\n");
-}
-#endif
-
 static void do_softint(struct work_struct *private_)
 {
 	printk(KERN_ERR "simserial: do_softint called\n");
@@ -351,11 +339,7 @@ static void rs_flush_buffer(struct tty_struct *tty)
 	info->xmit.head = info->xmit.tail = 0;
 	local_irq_restore(flags);
 
-	wake_up_interruptible(&tty->write_wait);
-
-	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-	    tty->ldisc.write_wakeup)
-		(tty->ldisc.write_wakeup)(tty);
+	tty_wakeup(tty);
 }
 
 /*
@@ -404,12 +388,6 @@ static void rs_unthrottle(struct tty_struct * tty)
 	printk(KERN_INFO "simrs_unthrottle called\n");
 }
 
-/*
- * rs_break() --- routine which turns the break handling on or off
- */
-static void rs_break(struct tty_struct *tty, int break_state)
-{
-}
 
 static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
@@ -422,14 +400,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 	}
 
 	switch (cmd) {
-		case TIOCMGET:
-			printk(KERN_INFO "rs_ioctl: TIOCMGET called\n");
-			return -EINVAL;
-		case TIOCMBIS:
-		case TIOCMBIC:
-		case TIOCMSET:
-			printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n");
-			return -EINVAL;
 		case TIOCGSERIAL:
 			printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
 			return 0;
@@ -488,14 +458,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 
 static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
-	unsigned int cflag = tty->termios->c_cflag;
-
-	if (   (cflag == old_termios->c_cflag)
-	    && (   RELEVANT_IFLAG(tty->termios->c_iflag)
-		== RELEVANT_IFLAG(old_termios->c_iflag)))
-	  return;
-
-
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) &&
 	    !(tty->termios->c_cflag & CRTSCTS)) {
@@ -623,9 +585,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	 * the line discipline to only process XON/XOFF characters.
 	 */
 	shutdown(info);
-	if (tty->ops->flush_buffer)
-		tty->ops->flush_buffer(tty);
-	if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
+	rs_flush_buffer(tty);
+	tty_ldisc_flush(tty);
 	info->event = 0;
 	info->tty = NULL;
 	if (info->blocked_open) {
@@ -955,7 +916,6 @@ static const struct tty_operations hp_ops = {
 	.stop = rs_stop,
 	.start = rs_start,
 	.hangup = rs_hangup,
-	.break_ctl = rs_break,
 	.wait_until_sent = rs_wait_until_sent,
 	.read_proc = rs_read_proc,
 };
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 7e028ceb93ba..465116aecb85 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1139,7 +1139,7 @@ sys32_pipe (int __user *fd)
 	int retval;
 	int fds[2];
 
-	retval = do_pipe(fds);
+	retval = do_pipe_flags(fds, 0);
 	if (retval)
 		goto out;
 	if (copy_to_user(fd, fds, sizeof(fds)))
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 13fd10e8699e..87fea11aecb7 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -36,6 +36,8 @@ obj-$(CONFIG_PCI_MSI)		+= msi_ia64.o
 mca_recovery-y			+= mca_drv.o mca_drv_asm.o
 obj-$(CONFIG_IA64_MC_ERR_INJECT)+= err_inject.o
 
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirtentry.o
+
 obj-$(CONFIG_IA64_ESI)		+= esi.o
 ifneq ($(CONFIG_IA64_ESI),)
 obj-y				+= esi_stub.o	# must be in kernel proper
@@ -70,3 +72,45 @@ $(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE
 # We must build gate.so before we can assemble it.
 # Note: kbuild does not track this dependency due to usage of .incbin
 $(obj)/gate-data.o: $(obj)/gate.so
+
+# Calculate NR_IRQ = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, ...) based on config
+define sed-y
+	"/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"
+endef
+quiet_cmd_nr_irqs = GEN     $@
+define cmd_nr_irqs
+	(set -e; \
+	 echo "#ifndef __ASM_NR_IRQS_H__"; \
+	 echo "#define __ASM_NR_IRQS_H__"; \
+	 echo "/*"; \
+	 echo " * DO NOT MODIFY."; \
+	 echo " *"; \
+	 echo " * This file was generated by Kbuild"; \
+	 echo " *"; \
+	 echo " */"; \
+	 echo ""; \
+	 sed -ne $(sed-y) $<; \
+	 echo ""; \
+	 echo "#endif" ) > $@
+endef
+
+# We use internal kbuild rules to avoid the "is up to date" message from make
+arch/$(SRCARCH)/kernel/nr-irqs.s: $(srctree)/arch/$(SRCARCH)/kernel/nr-irqs.c \
+				$(wildcard $(srctree)/include/asm-ia64/*/irq.h)
+	$(Q)mkdir -p $(dir $@)
+	$(call if_changed_dep,cc_s_c)
+
+include/asm-ia64/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s
+	$(Q)mkdir -p $(dir $@)
+	$(call cmd,nr_irqs)
+
+clean-files += $(objtree)/include/asm-ia64/nr-irqs.h
+
+#
+# native ivt.S and entry.S
+#
+ASM_PARAVIRT_OBJS = ivt.o entry.o
+define paravirtualized_native
+AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_NATIVE
+endef
+$(foreach obj,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_native,$(obj))))
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 43687cc60dfb..5d1eb7ee2bf6 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -774,7 +774,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 static
-int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid)
+int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	int pxm_id;
@@ -854,8 +854,7 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	union acpi_object *obj;
 	struct acpi_madt_local_sapic *lsapic;
 	cpumask_t tmp_map;
-	long physid;
-	int cpu;
+	int cpu, physid;
 
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
 		return -EINVAL;
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
index b8498ea62068..7b435451b3dc 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
@@ -51,7 +51,7 @@ processor_set_pstate (
 	retval = ia64_pal_set_pstate((u64)value);
 
 	if (retval) {
-		dprintk("Failed to set freq to 0x%x, with error 0x%x\n",
+		dprintk("Failed to set freq to 0x%x, with error 0x%lx\n",
 		        value, retval);
 		return -ENODEV;
 	}
@@ -74,7 +74,7 @@ processor_get_pstate (
 
 	if (retval)
 		dprintk("Failed to get current freq with "
-		        "error 0x%x, idx 0x%x\n", retval, *value);
+			"error 0x%lx, idx 0x%x\n", retval, *value);
 
 	return (int)retval;
 }
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index ca2bb95726de..0dd6c1419d8d 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -23,6 +23,11 @@
  * 11/07/2000
  */
 /*
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ */
+/*
  * Global (preserved) predicate usage on syscall entry/exit path:
  *
  *	pKStk:		See entry.h.
@@ -45,6 +50,7 @@
 
 #include "minstate.h"
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 	/*
 	 * execve() is special because in case of success, we need to
 	 * setup a null register window frame.
@@ -173,6 +179,7 @@ GLOBAL_ENTRY(sys_clone)
 	mov rp=loc0
 	br.ret.sptk.many rp
 END(sys_clone)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
 
 /*
  * prev_task <- ia64_switch_to(struct task_struct *next)
@@ -180,7 +187,7 @@ END(sys_clone)
  *	called.  The code starting at .map relies on this.  The rest of the code
  *	doesn't care about the interrupt masking status.
  */
-GLOBAL_ENTRY(ia64_switch_to)
+GLOBAL_ENTRY(__paravirt_switch_to)
 	.prologue
 	alloc r16=ar.pfs,1,0,0,0
 	DO_SAVE_SWITCH_STACK
@@ -204,7 +211,7 @@ GLOBAL_ENTRY(ia64_switch_to)
 	;;
 .done:
 	ld8 sp=[r21]			// load kernel stack pointer of new task
-	mov IA64_KR(CURRENT)=in0	// update "current" application register
+	MOV_TO_KR(CURRENT, in0, r8, r9)		// update "current" application register
 	mov r8=r13			// return pointer to previously running task
 	mov r13=in0			// set "current" pointer
 	;;
@@ -216,26 +223,25 @@ GLOBAL_ENTRY(ia64_switch_to)
 	br.ret.sptk.many rp		// boogie on out in new context
 
 .map:
-	rsm psr.ic			// interrupts (psr.i) are already disabled here
+	RSM_PSR_IC(r25)			// interrupts (psr.i) are already disabled here
 	movl r25=PAGE_KERNEL
 	;;
 	srlz.d
 	or r23=r25,r20			// construct PA | page properties
 	mov r25=IA64_GRANULE_SHIFT<<2
 	;;
-	mov cr.itir=r25
-	mov cr.ifa=in0			// VA of next task...
+	MOV_TO_ITIR(p0, r25, r8)
+	MOV_TO_IFA(in0, r8)		// VA of next task...
 	;;
 	mov r25=IA64_TR_CURRENT_STACK
-	mov IA64_KR(CURRENT_STACK)=r26	// remember last page we mapped...
+	MOV_TO_KR(CURRENT_STACK, r26, r8, r9)	// remember last page we mapped...
 	;;
 	itr.d dtr[r25]=r23		// wire in new mapping...
-	ssm psr.ic			// reenable the psr.ic bit
-	;;
-	srlz.d
+	SSM_PSR_IC_AND_SRLZ_D(r8, r9)	// reenable the psr.ic bit
 	br.cond.sptk .done
-END(ia64_switch_to)
+END(__paravirt_switch_to)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 /*
  * Note that interrupts are enabled during save_switch_stack and load_switch_stack.  This
  * means that we may get an interrupt with "sp" pointing to the new kernel stack while
@@ -375,7 +381,7 @@ END(save_switch_stack)
  *	- b7 holds address to return to
  *	- must not touch r8-r11
  */
-ENTRY(load_switch_stack)
+GLOBAL_ENTRY(load_switch_stack)
 	.prologue
 	.altrp b7
 
@@ -571,7 +577,7 @@ GLOBAL_ENTRY(ia64_trace_syscall)
 .ret3:
 (pUStk)	cmp.eq.unc p6,p0=r0,r0			// p6 <- pUStk
 (pUStk)	rsm psr.i				// disable interrupts
-	br.cond.sptk .work_pending_syscall_end
+	br.cond.sptk ia64_work_pending_syscall_end
 
 strace_error:
 	ld8 r3=[r2]				// load pt_regs.r8
@@ -636,8 +642,17 @@ GLOBAL_ENTRY(ia64_ret_from_syscall)
 	adds r2=PT(R8)+16,sp			// r2 = &pt_regs.r8
 	mov r10=r0				// clear error indication in r10
 (p7)	br.cond.spnt handle_syscall_error	// handle potential syscall failure
+#ifdef CONFIG_PARAVIRT
+	;;
+	br.cond.sptk.few ia64_leave_syscall
+	;;
+#endif /* CONFIG_PARAVIRT */
 END(ia64_ret_from_syscall)
+#ifndef CONFIG_PARAVIRT
 	// fall through
+#endif
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
+
 /*
  * ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't
  *	need to switch to bank 0 and doesn't restore the scratch registers.
@@ -682,7 +697,7 @@ END(ia64_ret_from_syscall)
  *	      ar.csd: cleared
  *	      ar.ssd: cleared
  */
-ENTRY(ia64_leave_syscall)
+GLOBAL_ENTRY(__paravirt_leave_syscall)
 	PT_REGS_UNWIND_INFO(0)
 	/*
 	 * work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -692,11 +707,11 @@ ENTRY(ia64_leave_syscall)
 	 * extra work.  We always check for extra work when returning to user-level.
 	 * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
 	 * is 0.  After extra work processing has been completed, execution
-	 * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
+	 * resumes at ia64_work_processed_syscall with p6 set to 1 if the extra-work-check
 	 * needs to be redone.
 	 */
 #ifdef CONFIG_PREEMPT
-	rsm psr.i				// disable interrupts
+	RSM_PSR_I(p0, r2, r18)			// disable interrupts
 	cmp.eq pLvSys,p0=r0,r0			// pLvSys=1: leave from syscall
 (pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
 	;;
@@ -706,11 +721,12 @@ ENTRY(ia64_leave_syscall)
 	;;
 	cmp.eq p6,p0=r21,r0		// p6 <- pUStk || (preempt_count == 0)
 #else /* !CONFIG_PREEMPT */
-(pUStk)	rsm psr.i
+	RSM_PSR_I(pUStk, r2, r18)
 	cmp.eq pLvSys,p0=r0,r0		// pLvSys=1: leave from syscall
 (pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
 #endif
-.work_processed_syscall:
+.global __paravirt_work_processed_syscall;
+__paravirt_work_processed_syscall:
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	adds r2=PT(LOADRS)+16,r12
 (pUStk)	mov.m r22=ar.itc			// fetch time at leave
@@ -744,7 +760,7 @@ ENTRY(ia64_leave_syscall)
 (pNonSys) break 0		//      bug check: we shouldn't be here if pNonSys is TRUE!
 	;;
 	invala			// M0|1 invalidate ALAT
-	rsm psr.i | psr.ic	// M2   turn off interrupts and interruption collection
+	RSM_PSR_I_IC(r28, r29, r30)	// M2   turn off interrupts and interruption collection
 	cmp.eq p9,p0=r0,r0	// A    set p9 to indicate that we should restore cr.ifs
 
 	ld8 r29=[r2],16		// M0|1 load cr.ipsr
@@ -765,7 +781,7 @@ ENTRY(ia64_leave_syscall)
 	;;
 #endif
 	ld8 r26=[r2],PT(B0)-PT(AR_PFS)	// M0|1 load ar.pfs
-(pKStk)	mov r22=psr			// M2   read PSR now that interrupts are disabled
+	MOV_FROM_PSR(pKStk, r22, r21)	// M2   read PSR now that interrupts are disabled
 	nop 0
 	;;
 	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
@@ -798,7 +814,7 @@ ENTRY(ia64_leave_syscall)
 
 	srlz.d				// M0   ensure interruption collection is off (for cover)
 	shr.u r18=r19,16		// I0|1 get byte size of existing "dirty" partition
-	cover				// B    add current frame into dirty partition & set cr.ifs
+	COVER				// B    add current frame into dirty partition & set cr.ifs
 	;;
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	mov r19=ar.bsp			// M2   get new backing store pointer
@@ -823,8 +839,9 @@ ENTRY(ia64_leave_syscall)
 	mov.m ar.ssd=r0			// M2   clear ar.ssd
 	mov f11=f0			// F    clear f11
 	br.cond.sptk.many rbs_switch	// B
-END(ia64_leave_syscall)
+END(__paravirt_leave_syscall)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 #ifdef CONFIG_IA32_SUPPORT
 GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
 	PT_REGS_UNWIND_INFO(0)
@@ -835,10 +852,20 @@ GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
 	st8.spill [r2]=r8	// store return value in slot for r8 and set unat bit
 	.mem.offset 8,0
 	st8.spill [r3]=r0	// clear error indication in slot for r10 and set unat bit
+#ifdef CONFIG_PARAVIRT
+	;;
+	// don't fall through, ia64_leave_kernel may be #define'd
+	br.cond.sptk.few ia64_leave_kernel
+	;;
+#endif /* CONFIG_PARAVIRT */
 END(ia64_ret_from_ia32_execve)
+#ifndef CONFIG_PARAVIRT
 	// fall through
+#endif
 #endif /* CONFIG_IA32_SUPPORT */
-GLOBAL_ENTRY(ia64_leave_kernel)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
+
+GLOBAL_ENTRY(__paravirt_leave_kernel)
 	PT_REGS_UNWIND_INFO(0)
 	/*
 	 * work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -852,7 +879,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 * needs to be redone.
 	 */
 #ifdef CONFIG_PREEMPT
-	rsm psr.i				// disable interrupts
+	RSM_PSR_I(p0, r17, r31)			// disable interrupts
 	cmp.eq p0,pLvSys=r0,r0			// pLvSys=0: leave from kernel
 (pKStk)	adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
 	;;
@@ -862,7 +889,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	;;
 	cmp.eq p6,p0=r21,r0		// p6 <- pUStk || (preempt_count == 0)
 #else
-(pUStk)	rsm psr.i
+	RSM_PSR_I(pUStk, r17, r31)
 	cmp.eq p0,pLvSys=r0,r0		// pLvSys=0: leave from kernel
 (pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
 #endif
@@ -910,7 +937,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	mov ar.csd=r30
 	mov ar.ssd=r31
 	;;
-	rsm psr.i | psr.ic	// initiate turning off of interrupt and interruption collection
+	RSM_PSR_I_IC(r23, r22, r25)	// initiate turning off of interrupt and interruption collection
 	invala			// invalidate ALAT
 	;;
 	ld8.fill r22=[r2],24
@@ -942,7 +969,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	mov ar.ccv=r15
 	;;
 	ldf.fill f11=[r2]
-	bsw.0			// switch back to bank 0 (no stop bit required beforehand...)
+	BSW_0(r2, r3, r15)	// switch back to bank 0 (no stop bit required beforehand...)
 	;;
 (pUStk)	mov r18=IA64_KR(CURRENT)// M2 (12 cycle read latency)
 	adds r16=PT(CR_IPSR)+16,r12
@@ -950,12 +977,12 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	.pred.rel.mutex pUStk,pKStk
-(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
+	MOV_FROM_PSR(pKStk, r22, r29)	// M2 read PSR now that interrupts are disabled
 (pUStk)	mov.m r22=ar.itc	// M  fetch time at leave
 	nop.i 0
 	;;
 #else
-(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
+	MOV_FROM_PSR(pKStk, r22, r29)	// M2 read PSR now that interrupts are disabled
 	nop.i 0
 	nop.i 0
 	;;
@@ -1027,7 +1054,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 * NOTE: alloc, loadrs, and cover can't be predicated.
 	 */
 (pNonSys) br.cond.dpnt dont_preserve_current_frame
-	cover				// add current frame into dirty partition and set cr.ifs
+	COVER				// add current frame into dirty partition and set cr.ifs
 	;;
 	mov r19=ar.bsp			// get new backing store pointer
 rbs_switch:
@@ -1130,16 +1157,16 @@ skip_rbs_switch:
 (pKStk)	dep r29=r22,r29,21,1	// I0 update ipsr.pp with psr.pp
 (pLvSys)mov r16=r0		// A  clear r16 for leave_syscall, no-op otherwise
 	;;
-	mov cr.ipsr=r29		// M2
+	MOV_TO_IPSR(p0, r29, r25)	// M2
 	mov ar.pfs=r26		// I0
 (pLvSys)mov r17=r0		// A  clear r17 for leave_syscall, no-op otherwise
 
-(p9)	mov cr.ifs=r30		// M2
+	MOV_TO_IFS(p9, r30, r25)// M2
 	mov b0=r21		// I0
 (pLvSys)mov r18=r0		// A  clear r18 for leave_syscall, no-op otherwise
 
 	mov ar.fpsr=r20		// M2
-	mov cr.iip=r28		// M2
+	MOV_TO_IIP(r28, r25)	// M2
 	nop 0
 	;;
 (pUStk)	mov ar.rnat=r24		// M2 must happen with RSE in lazy mode
@@ -1148,7 +1175,7 @@ skip_rbs_switch:
 
 	mov ar.rsc=r27		// M2
 	mov pr=r31,-1		// I0
-	rfi			// B
+	RFI			// B
 
 	/*
 	 * On entry:
@@ -1174,35 +1201,36 @@ skip_rbs_switch:
 	;;
 (pKStk) st4 [r20]=r21
 #endif
-	ssm psr.i		// enable interrupts
+	SSM_PSR_I(p0, p6, r2)	// enable interrupts
 	br.call.spnt.many rp=schedule
 .ret9:	cmp.eq p6,p0=r0,r0	// p6 <- 1 (re-check)
-	rsm psr.i		// disable interrupts
+	RSM_PSR_I(p0, r2, r20)	// disable interrupts
 	;;
 #ifdef CONFIG_PREEMPT
 (pKStk)	adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
 	;;
 (pKStk)	st4 [r20]=r0		// preempt_count() <- 0
 #endif
-(pLvSys)br.cond.sptk.few  .work_pending_syscall_end
+(pLvSys)br.cond.sptk.few  __paravirt_pending_syscall_end
 	br.cond.sptk.many .work_processed_kernel
 
 .notify:
 (pUStk)	br.call.spnt.many rp=notify_resume_user
 .ret10:	cmp.ne p6,p0=r0,r0	// p6 <- 0 (don't re-check)
-(pLvSys)br.cond.sptk.few  .work_pending_syscall_end
+(pLvSys)br.cond.sptk.few  __paravirt_pending_syscall_end
 	br.cond.sptk.many .work_processed_kernel
 
-.work_pending_syscall_end:
+.global __paravirt_pending_syscall_end;
+__paravirt_pending_syscall_end:
 	adds r2=PT(R8)+16,r12
 	adds r3=PT(R10)+16,r12
 	;;
 	ld8 r8=[r2]
 	ld8 r10=[r3]
-	br.cond.sptk.many .work_processed_syscall
-
-END(ia64_leave_kernel)
+	br.cond.sptk.many __paravirt_work_processed_syscall_target
+END(__paravirt_leave_kernel)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 ENTRY(handle_syscall_error)
 	/*
 	 * Some system calls (e.g., ptrace, mmap) can return arbitrary values which could
@@ -1244,7 +1272,7 @@ END(ia64_invoke_schedule_tail)
 	 * We declare 8 input registers so the system call args get preserved,
 	 * in case we need to restart a system call.
 	 */
-ENTRY(notify_resume_user)
+GLOBAL_ENTRY(notify_resume_user)
 	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
 	alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs in case of syscall restart!
 	mov r9=ar.unat
@@ -1306,7 +1334,7 @@ ENTRY(sys_rt_sigreturn)
 	adds sp=16,sp
 	;;
 	ld8 r9=[sp]				// load new ar.unat
-	mov.sptk b7=r8,ia64_leave_kernel
+	mov.sptk b7=r8,ia64_native_leave_kernel
 	;;
 	mov ar.unat=r9
 	br.many b7
@@ -1663,5 +1691,12 @@ sys_call_table:
 	data8 sys_timerfd_create		// 1310
 	data8 sys_timerfd_settime
 	data8 sys_timerfd_gettime
+	data8 sys_signalfd4
+	data8 sys_eventfd2
+	data8 sys_epoll_create1			// 1315
+	data8 sys_dup3
+	data8 sys_pipe2
+	data8 sys_inotify_init1
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index b642648cc2ac..c539c689493b 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -55,7 +55,8 @@ static u64 resources[NR_CPUS];
 
 #define show(name) 							\
 static ssize_t 								\
-show_##name(struct sys_device *dev, char *buf)				\
+show_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+		char *buf)						\
 {									\
 	u32 cpu=dev->id;						\
 	return sprintf(buf, "%lx\n", name[cpu]);			\
@@ -63,7 +64,8 @@ show_##name(struct sys_device *dev, char *buf)				\
 
 #define store(name)							\
 static ssize_t 								\
-store_##name(struct sys_device *dev, const char *buf, size_t size)	\
+store_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+					const char *buf, size_t size)	\
 {									\
 	unsigned int cpu=dev->id;					\
 	name[cpu] = simple_strtoull(buf, NULL, 16);			\
@@ -76,7 +78,8 @@ show(call_start)
  * processor. The cpu number in driver is only used for storing data.
  */
 static ssize_t
-store_call_start(struct sys_device *dev, const char *buf, size_t size)
+store_call_start(struct sys_device *dev, struct sysdev_attribute *attr,
+		const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	unsigned long call_start = simple_strtoull(buf, NULL, 16);
@@ -124,14 +127,16 @@ show(err_type_info)
 store(err_type_info)
 
 static ssize_t
-show_virtual_to_phys(struct sys_device *dev, char *buf)
+show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+			char *buf)
 {
 	unsigned int cpu=dev->id;
 	return sprintf(buf, "%lx\n", phys_addr[cpu]);
 }
 
 static ssize_t
-store_virtual_to_phys(struct sys_device *dev, const char *buf, size_t size)
+store_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	u64 virt_addr=simple_strtoull(buf, NULL, 16);
@@ -154,7 +159,8 @@ show(err_struct_info)
 store(err_struct_info)
 
 static ssize_t
-show_err_data_buffer(struct sys_device *dev, char *buf)
+show_err_data_buffer(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned int cpu=dev->id;
 
@@ -165,7 +171,9 @@ show_err_data_buffer(struct sys_device *dev, char *buf)
 }
 
 static ssize_t
-store_err_data_buffer(struct sys_device *dev, const char *buf, size_t size)
+store_err_data_buffer(struct sys_device *dev,
+			struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	int ret;
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index ddeab4e36fd5..db540e58c783 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -26,11 +26,14 @@
 #include <asm/mmu_context.h>
 #include <asm/asm-offsets.h>
 #include <asm/pal.h>
+#include <asm/paravirt.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/system.h>
 #include <asm/mca_asm.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define SAL_PSR_BITS_TO_SET				\
@@ -367,6 +370,44 @@ start_ap:
 	;;
 (isBP)	st8 [r2]=r28		// save the address of the boot param area passed by the bootloader
 
+#ifdef CONFIG_PARAVIRT
+
+	movl r14=hypervisor_setup_hooks
+	movl r15=hypervisor_type
+	mov r16=num_hypervisor_hooks
+	;;
+	ld8 r2=[r15]
+	;;
+	cmp.ltu p7,p0=r2,r16	// array size check
+	shladd r8=r2,3,r14
+	;;
+(p7)	ld8 r9=[r8]
+	;;
+(p7)	mov b1=r9
+(p7)	cmp.ne.unc p7,p0=r9,r0	// no actual branch to NULL
+	;;
+(p7)	br.call.sptk.many rp=b1
+
+	__INITDATA
+
+default_setup_hook = 0		// Currently nothing needs to be done.
+
+	.weak xen_setup_hook
+
+	.global hypervisor_type
+hypervisor_type:
+	data8		PARAVIRT_HYPERVISOR_TYPE_DEFAULT
+
+	// must have the same order with PARAVIRT_HYPERVISOR_TYPE_xxx
+
+hypervisor_setup_hooks:
+	data8		default_setup_hook
+	data8		xen_setup_hook
+num_hypervisor_hooks = (. - hypervisor_setup_hooks) / 8
+	.previous
+
+#endif
+
 #ifdef CONFIG_SMP
 (isAP)	br.call.sptk.many rp=start_secondary
 .ret0:
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 39752cdef6ff..3bc2fa64f87f 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -585,6 +585,15 @@ static inline int irq_is_shared (int irq)
 	return (iosapic_intr_info[irq].count > 1);
 }
 
+struct irq_chip*
+ia64_native_iosapic_get_irq_chip(unsigned long trigger)
+{
+	if (trigger == IOSAPIC_EDGE)
+		return &irq_type_iosapic_edge;
+	else
+		return &irq_type_iosapic_level;
+}
+
 static int
 register_intr (unsigned int gsi, int irq, unsigned char delivery,
 	       unsigned long polarity, unsigned long trigger)
@@ -635,13 +644,10 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 	iosapic_intr_info[irq].dmode    = delivery;
 	iosapic_intr_info[irq].trigger  = trigger;
 
-	if (trigger == IOSAPIC_EDGE)
-		irq_type = &irq_type_iosapic_edge;
-	else
-		irq_type = &irq_type_iosapic_level;
+	irq_type = iosapic_get_irq_chip(trigger);
 
 	idesc = irq_desc + irq;
-	if (idesc->chip != irq_type) {
+	if (irq_type != NULL && idesc->chip != irq_type) {
 		if (idesc->chip != &no_irq_type)
 			printk(KERN_WARNING
 			       "%s: changing vector %d from %s to %s\n",
@@ -974,6 +980,22 @@ iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
 }
 
 void __init
+ia64_native_iosapic_pcat_compat_init(void)
+{
+	if (pcat_compat) {
+		/*
+		 * Disable the compatibility mode interrupts (8259 style),
+		 * needs IN/OUT support enabled.
+		 */
+		printk(KERN_INFO
+		       "%s: Disabling PC-AT compatible 8259 interrupts\n",
+		       __func__);
+		outb(0xff, 0xA1);
+		outb(0xff, 0x21);
+	}
+}
+
+void __init
 iosapic_system_init (int system_pcat_compat)
 {
 	int irq;
@@ -987,17 +1009,8 @@ iosapic_system_init (int system_pcat_compat)
 	}
 
 	pcat_compat = system_pcat_compat;
-	if (pcat_compat) {
-		/*
-		 * Disable the compatibility mode interrupts (8259 style),
-		 * needs IN/OUT support enabled.
-		 */
-		printk(KERN_INFO
-		       "%s: Disabling PC-AT compatible 8259 interrupts\n",
-		       __func__);
-		outb(0xff, 0xA1);
-		outb(0xff, 0x21);
-	}
+	if (pcat_compat)
+		iosapic_pcat_compat_init();
 }
 
 static inline int
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 5538471e8d68..28d3d483db92 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -196,7 +196,7 @@ static void clear_irq_vector(int irq)
 }
 
 int
-assign_irq_vector (int irq)
+ia64_native_assign_irq_vector (int irq)
 {
 	unsigned long flags;
 	int vector, cpu;
@@ -222,7 +222,7 @@ assign_irq_vector (int irq)
 }
 
 void
-free_irq_vector (int vector)
+ia64_native_free_irq_vector (int vector)
 {
 	if (vector < IA64_FIRST_DEVICE_VECTOR ||
 	    vector > IA64_LAST_DEVICE_VECTOR)
@@ -600,7 +600,6 @@ static irqreturn_t dummy_handler (int irq, void *dev_id)
 {
 	BUG();
 }
-extern irqreturn_t handle_IPI (int irq, void *dev_id);
 
 static struct irqaction ipi_irqaction = {
 	.handler =	handle_IPI,
@@ -623,7 +622,7 @@ static struct irqaction tlb_irqaction = {
 #endif
 
 void
-register_percpu_irq (ia64_vector vec, struct irqaction *action)
+ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action)
 {
 	irq_desc_t *desc;
 	unsigned int irq;
@@ -638,13 +637,21 @@ register_percpu_irq (ia64_vector vec, struct irqaction *action)
 }
 
 void __init
-init_IRQ (void)
+ia64_native_register_ipi(void)
 {
-	register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
 #ifdef CONFIG_SMP
 	register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction);
 	register_percpu_irq(IA64_IPI_RESCHEDULE, &resched_irqaction);
 	register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &tlb_irqaction);
+#endif
+}
+
+void __init
+init_IRQ (void)
+{
+	ia64_register_ipi();
+	register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
+#ifdef CONFIG_SMP
 #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)
 	if (vector_domain_type != VECTOR_DOMAIN_NONE) {
 		BUG_ON(IA64_FIRST_DEVICE_VECTOR != IA64_IRQ_MOVE_VECTOR);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 80b44ea052d7..c39627df3cde 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -12,6 +12,14 @@
  *
  * 00/08/23 Asit Mallick <asit.k.mallick@intel.com> TLB handling for SMP
  * 00/12/20 David Mosberger-Tang <davidm@hpl.hp.com> DTLB/ITLB handler now uses virtual PT.
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *	Dan Magenheimer <dan.magenheimer@hp.com>
+ *      Xen paravirtualization
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ *      Yaozu (Eddie) Dong <eddie.dong@intel.com>
  */
 /*
  * This file defines the interruption vector table used by the CPU.
@@ -102,13 +110,13 @@ ENTRY(vhpt_miss)
 	 *	- the faulting virtual address uses unimplemented address bits
 	 *	- the faulting virtual address has no valid page table mapping
 	 */
-	mov r16=cr.ifa				// get address that caused the TLB miss
+	MOV_FROM_IFA(r16)			// get address that caused the TLB miss
 #ifdef CONFIG_HUGETLB_PAGE
 	movl r18=PAGE_SHIFT
-	mov r25=cr.itir
+	MOV_FROM_ITIR(r25)
 #endif
 	;;
-	rsm psr.dt				// use physical addressing for data
+	RSM_PSR_DT				// use physical addressing for data
 	mov r31=pr				// save the predicate registers
 	mov r19=IA64_KR(PT_BASE)		// get page table base address
 	shl r21=r16,3				// shift bit 60 into sign bit
@@ -168,21 +176,21 @@ ENTRY(vhpt_miss)
 	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// r21=pte_offset(pmd,addr)
 	;;
 (p7)	ld8 r18=[r21]				// read *pte
-	mov r19=cr.isr				// cr.isr bit 32 tells us if this is an insn miss
+	MOV_FROM_ISR(r19)			// cr.isr bit 32 tells us if this is an insn miss
 	;;
 (p7)	tbit.z p6,p7=r18,_PAGE_P_BIT		// page present bit cleared?
-	mov r22=cr.iha				// get the VHPT address that caused the TLB miss
+	MOV_FROM_IHA(r22)			// get the VHPT address that caused the TLB miss
 	;;					// avoid RAW on p7
 (p7)	tbit.nz.unc p10,p11=r19,32		// is it an instruction TLB miss?
 	dep r23=0,r20,0,PAGE_SHIFT		// clear low bits to get page address
 	;;
-(p10)	itc.i r18				// insert the instruction TLB entry
-(p11)	itc.d r18				// insert the data TLB entry
+	ITC_I_AND_D(p10, p11, r18, r24)		// insert the instruction TLB entry and
+						// insert the data TLB entry
 (p6)	br.cond.spnt.many page_fault		// handle bad address/page not present (page fault)
-	mov cr.ifa=r22
+	MOV_TO_IFA(r22, r24)
 
 #ifdef CONFIG_HUGETLB_PAGE
-(p8)	mov cr.itir=r25				// change to default page-size for VHPT
+	MOV_TO_ITIR(p8, r25, r24)		// change to default page-size for VHPT
 #endif
 
 	/*
@@ -192,7 +200,7 @@ ENTRY(vhpt_miss)
 	 */
 	adds r24=__DIRTY_BITS_NO_ED|_PAGE_PL_0|_PAGE_AR_RW,r23
 	;;
-(p7)	itc.d r24
+	ITC_D(p7, r24, r25)
 	;;
 #ifdef CONFIG_SMP
 	/*
@@ -234,7 +242,7 @@ ENTRY(vhpt_miss)
 #endif
 
 	mov pr=r31,-1				// restore predicate registers
-	rfi
+	RFI
 END(vhpt_miss)
 
 	.org ia64_ivt+0x400
@@ -248,11 +256,11 @@ ENTRY(itlb_miss)
 	 * mode, walk the page table, and then re-execute the PTE read and
 	 * go on normally after that.
 	 */
-	mov r16=cr.ifa				// get virtual address
+	MOV_FROM_IFA(r16)			// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 .itlb_fault:
-	mov r17=cr.iha				// get virtual address of PTE
+	MOV_FROM_IHA(r17)			// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
 1:	ld8 r18=[r17]				// read *pte
@@ -261,7 +269,7 @@ ENTRY(itlb_miss)
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
 (p6)	br.cond.spnt page_fault
 	;;
-	itc.i r18
+	ITC_I(p0, r18, r19)
 	;;
 #ifdef CONFIG_SMP
 	/*
@@ -278,7 +286,7 @@ ENTRY(itlb_miss)
 (p7)	ptc.l r16,r20
 #endif
 	mov pr=r31,-1
-	rfi
+	RFI
 END(itlb_miss)
 
 	.org ia64_ivt+0x0800
@@ -292,11 +300,11 @@ ENTRY(dtlb_miss)
 	 * mode, walk the page table, and then re-execute the PTE read and
 	 * go on normally after that.
 	 */
-	mov r16=cr.ifa				// get virtual address
+	MOV_FROM_IFA(r16)			// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 dtlb_fault:
-	mov r17=cr.iha				// get virtual address of PTE
+	MOV_FROM_IHA(r17)			// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
 1:	ld8 r18=[r17]				// read *pte
@@ -305,7 +313,7 @@ dtlb_fault:
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
 (p6)	br.cond.spnt page_fault
 	;;
-	itc.d r18
+	ITC_D(p0, r18, r19)
 	;;
 #ifdef CONFIG_SMP
 	/*
@@ -322,7 +330,7 @@ dtlb_fault:
 (p7)	ptc.l r16,r20
 #endif
 	mov pr=r31,-1
-	rfi
+	RFI
 END(dtlb_miss)
 
 	.org ia64_ivt+0x0c00
@@ -330,9 +338,9 @@ END(dtlb_miss)
 // 0x0c00 Entry 3 (size 64 bundles) Alt ITLB (19)
 ENTRY(alt_itlb_miss)
 	DBG_FAULT(3)
-	mov r16=cr.ifa		// get address that caused the TLB miss
+	MOV_FROM_IFA(r16)	// get address that caused the TLB miss
 	movl r17=PAGE_KERNEL
-	mov r21=cr.ipsr
+	MOV_FROM_IPSR(p0, r21)
 	movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
 	mov r31=pr
 	;;
@@ -341,9 +349,9 @@ ENTRY(alt_itlb_miss)
 	;;
 	cmp.gt p8,p0=6,r22			// user mode
 	;;
-(p8)	thash r17=r16
+	THASH(p8, r17, r16, r23)
 	;;
-(p8)	mov cr.iha=r17
+	MOV_TO_IHA(p8, r17, r23)
 (p8)	mov r29=b0				// save b0
 (p8)	br.cond.dptk .itlb_fault
 #endif
@@ -358,9 +366,9 @@ ENTRY(alt_itlb_miss)
 	or r19=r19,r18		// set bit 4 (uncached) if the access was to region 6
 (p8)	br.cond.spnt page_fault
 	;;
-	itc.i r19		// insert the TLB entry
+	ITC_I(p0, r19, r18)	// insert the TLB entry
 	mov pr=r31,-1
-	rfi
+	RFI
 END(alt_itlb_miss)
 
 	.org ia64_ivt+0x1000
@@ -368,11 +376,11 @@ END(alt_itlb_miss)
 // 0x1000 Entry 4 (size 64 bundles) Alt DTLB (7,46)
 ENTRY(alt_dtlb_miss)
 	DBG_FAULT(4)
-	mov r16=cr.ifa		// get address that caused the TLB miss
+	MOV_FROM_IFA(r16)	// get address that caused the TLB miss
 	movl r17=PAGE_KERNEL
-	mov r20=cr.isr
+	MOV_FROM_ISR(r20)
 	movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
-	mov r21=cr.ipsr
+	MOV_FROM_IPSR(p0, r21)
 	mov r31=pr
 	mov r24=PERCPU_ADDR
 	;;
@@ -381,9 +389,9 @@ ENTRY(alt_dtlb_miss)
 	;;
 	cmp.gt p8,p0=6,r22			// access to region 0-5
 	;;
-(p8)	thash r17=r16
+	THASH(p8, r17, r16, r25)
 	;;
-(p8)	mov cr.iha=r17
+	MOV_TO_IHA(p8, r17, r25)
 (p8)	mov r29=b0				// save b0
 (p8)	br.cond.dptk dtlb_fault
 #endif
@@ -402,7 +410,7 @@ ENTRY(alt_dtlb_miss)
 	tbit.nz p9,p0=r20,IA64_ISR_NA_BIT	// is non-access bit on?
 	;;
 (p10)	sub r19=r19,r26
-(p10)	mov cr.itir=r25
+	MOV_TO_ITIR(p10, r25, r24)
 	cmp.ne p8,p0=r0,r23
 (p9)	cmp.eq.or.andcm p6,p7=IA64_ISR_CODE_LFETCH,r22	// check isr.code field
 (p12)	dep r17=-1,r17,4,1			// set ma=UC for region 6 addr
@@ -411,11 +419,11 @@ ENTRY(alt_dtlb_miss)
 	dep r21=-1,r21,IA64_PSR_ED_BIT,1
 	;;
 	or r19=r19,r17		// insert PTE control bits into r19
-(p6)	mov cr.ipsr=r21
+	MOV_TO_IPSR(p6, r21, r24)
 	;;
-(p7)	itc.d r19		// insert the TLB entry
+	ITC_D(p7, r19, r18)	// insert the TLB entry
 	mov pr=r31,-1
-	rfi
+	RFI
 END(alt_dtlb_miss)
 
 	.org ia64_ivt+0x1400
@@ -444,10 +452,10 @@ ENTRY(nested_dtlb_miss)
 	 *
 	 * Clobbered:	b0, r18, r19, r21, r22, psr.dt (cleared)
 	 */
-	rsm psr.dt				// switch to using physical data addressing
+	RSM_PSR_DT				// switch to using physical data addressing
 	mov r19=IA64_KR(PT_BASE)		// get the page table base address
 	shl r21=r16,3				// shift bit 60 into sign bit
-	mov r18=cr.itir
+	MOV_FROM_ITIR(r18)
 	;;
 	shr.u r17=r16,61			// get the region number into r17
 	extr.u r18=r18,2,6			// get the faulting page size
@@ -507,33 +515,6 @@ ENTRY(ikey_miss)
 	FAULT(6)
 END(ikey_miss)
 
-	//-----------------------------------------------------------------------------------
-	// call do_page_fault (predicates are in r31, psr.dt may be off, r16 is faulting address)
-ENTRY(page_fault)
-	ssm psr.dt
-	;;
-	srlz.i
-	;;
-	SAVE_MIN_WITH_COVER
-	alloc r15=ar.pfs,0,0,3,0
-	mov out0=cr.ifa
-	mov out1=cr.isr
-	adds r3=8,r2				// set up second base pointer
-	;;
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collectin is on
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	movl r14=ia64_leave_kernel
-	;;
-	SAVE_REST
-	mov rp=r14
-	;;
-	adds out2=16,r12			// out2 = pointer to pt_regs
-	br.call.sptk.many b6=ia64_do_page_fault	// ignore return address
-END(page_fault)
-
 	.org ia64_ivt+0x1c00
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x1c00 Entry 7 (size 64 bundles) Data Key Miss (12,51)
@@ -556,10 +537,10 @@ ENTRY(dirty_bit)
 	 * page table TLB entry isn't present, we take a nested TLB miss hit where we look
 	 * up the physical address of the L3 PTE and then continue at label 1 below.
 	 */
-	mov r16=cr.ifa				// get the address that caused the fault
+	MOV_FROM_IFA(r16)			// get the address that caused the fault
 	movl r30=1f				// load continuation point in case of nested fault
 	;;
-	thash r17=r16				// compute virtual address of L3 PTE
+	THASH(p0, r17, r16, r18)		// compute virtual address of L3 PTE
 	mov r29=b0				// save b0 in case of nested fault
 	mov r31=pr				// save pr
 #ifdef CONFIG_SMP
@@ -576,7 +557,7 @@ ENTRY(dirty_bit)
 	;;
 (p6)	cmp.eq p6,p7=r26,r18			// Only compare if page is present
 	;;
-(p6)	itc.d r25				// install updated PTE
+	ITC_D(p6, r25, r18)			// install updated PTE
 	;;
 	/*
 	 * Tell the assemblers dependency-violation checker that the above "itc" instructions
@@ -602,7 +583,7 @@ ENTRY(dirty_bit)
 	itc.d r18				// install updated PTE
 #endif
 	mov pr=r31,-1				// restore pr
-	rfi
+	RFI
 END(dirty_bit)
 
 	.org ia64_ivt+0x2400
@@ -611,22 +592,22 @@ END(dirty_bit)
 ENTRY(iaccess_bit)
 	DBG_FAULT(9)
 	// Like Entry 8, except for instruction access
-	mov r16=cr.ifa				// get the address that caused the fault
+	MOV_FROM_IFA(r16)			// get the address that caused the fault
 	movl r30=1f				// load continuation point in case of nested fault
 	mov r31=pr				// save predicates
 #ifdef CONFIG_ITANIUM
 	/*
 	 * Erratum 10 (IFA may contain incorrect address) has "NoFix" status.
 	 */
-	mov r17=cr.ipsr
+	MOV_FROM_IPSR(p0, r17)
 	;;
-	mov r18=cr.iip
+	MOV_FROM_IIP(r18)
 	tbit.z p6,p0=r17,IA64_PSR_IS_BIT	// IA64 instruction set?
 	;;
 (p6)	mov r16=r18				// if so, use cr.iip instead of cr.ifa
 #endif /* CONFIG_ITANIUM */
 	;;
-	thash r17=r16				// compute virtual address of L3 PTE
+	THASH(p0, r17, r16, r18)		// compute virtual address of L3 PTE
 	mov r29=b0				// save b0 in case of nested fault)
 #ifdef CONFIG_SMP
 	mov r28=ar.ccv				// save ar.ccv
@@ -642,7 +623,7 @@ ENTRY(iaccess_bit)
 	;;
 (p6)	cmp.eq p6,p7=r26,r18			// Only if page present
 	;;
-(p6)	itc.i r25				// install updated PTE
+	ITC_I(p6, r25, r26)			// install updated PTE
 	;;
 	/*
 	 * Tell the assemblers dependency-violation checker that the above "itc" instructions
@@ -668,7 +649,7 @@ ENTRY(iaccess_bit)
 	itc.i r18				// install updated PTE
 #endif /* !CONFIG_SMP */
 	mov pr=r31,-1
-	rfi
+	RFI
 END(iaccess_bit)
 
 	.org ia64_ivt+0x2800
@@ -677,10 +658,10 @@ END(iaccess_bit)
 ENTRY(daccess_bit)
 	DBG_FAULT(10)
 	// Like Entry 8, except for data access
-	mov r16=cr.ifa				// get the address that caused the fault
+	MOV_FROM_IFA(r16)			// get the address that caused the fault
 	movl r30=1f				// load continuation point in case of nested fault
 	;;
-	thash r17=r16				// compute virtual address of L3 PTE
+	THASH(p0, r17, r16, r18)		// compute virtual address of L3 PTE
 	mov r31=pr
 	mov r29=b0				// save b0 in case of nested fault)
 #ifdef CONFIG_SMP
@@ -697,7 +678,7 @@ ENTRY(daccess_bit)
 	;;
 (p6)	cmp.eq p6,p7=r26,r18			// Only if page is present
 	;;
-(p6)	itc.d r25				// install updated PTE
+	ITC_D(p6, r25, r26)			// install updated PTE
 	/*
 	 * Tell the assemblers dependency-violation checker that the above "itc" instructions
 	 * cannot possibly affect the following loads:
@@ -721,7 +702,7 @@ ENTRY(daccess_bit)
 #endif
 	mov b0=r29				// restore b0
 	mov pr=r31,-1
-	rfi
+	RFI
 END(daccess_bit)
 
 	.org ia64_ivt+0x2c00
@@ -745,10 +726,10 @@ ENTRY(break_fault)
 	 */
 	DBG_FAULT(11)
 	mov.m r16=IA64_KR(CURRENT)		// M2 r16 <- current task (12 cyc)
-	mov r29=cr.ipsr				// M2 (12 cyc)
+	MOV_FROM_IPSR(p0, r29)			// M2 (12 cyc)
 	mov r31=pr				// I0 (2 cyc)
 
-	mov r17=cr.iim				// M2 (2 cyc)
+	MOV_FROM_IIM(r17)			// M2 (2 cyc)
 	mov.m r27=ar.rsc			// M2 (12 cyc)
 	mov r18=__IA64_BREAK_SYSCALL		// A
 
@@ -767,7 +748,7 @@ ENTRY(break_fault)
 	nop.m 0
 	movl r30=sys_call_table			// X
 
-	mov r28=cr.iip				// M2 (2 cyc)
+	MOV_FROM_IIP(r28)			// M2 (2 cyc)
 	cmp.eq p0,p7=r18,r17			// I0 is this a system call?
 (p7)	br.cond.spnt non_syscall		// B  no ->
 	//
@@ -864,18 +845,17 @@ ENTRY(break_fault)
 #endif
 	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
 	nop 0
-	bsw.1					// B (6 cyc) regs are saved, switch to bank 1
+	BSW_1(r2, r14)				// B (6 cyc) regs are saved, switch to bank 1
 	;;
 
-	ssm psr.ic | PSR_DEFAULT_BITS		// M2	now it's safe to re-enable intr.-collection
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r16)	// M2	now it's safe to re-enable intr.-collection
+						// M0   ensure interruption collection is on
 	movl r3=ia64_ret_from_syscall		// X
 	;;
-
-	srlz.i					// M0   ensure interruption collection is on
 	mov rp=r3				// I0   set the real return addr
 (p10)	br.cond.spnt.many ia64_ret_from_syscall	// B    return if bad call-frame or r15 is a NaT
 
-(p15)	ssm psr.i				// M2   restore psr.i
+	SSM_PSR_I(p15, p15, r16)		// M2   restore psr.i
 (p14)	br.call.sptk.many b6=b6			// B    invoke syscall-handker (ignore return addr)
 	br.cond.spnt.many ia64_trace_syscall	// B	do syscall-tracing thingamagic
 	// NOT REACHED
@@ -895,27 +875,8 @@ END(break_fault)
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x3000 Entry 12 (size 64 bundles) External Interrupt (4)
 ENTRY(interrupt)
-	DBG_FAULT(12)
-	mov r31=pr		// prepare to save predicates
-	;;
-	SAVE_MIN_WITH_COVER	// uses r31; defines r2 and r3
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	adds r3=8,r2		// set up second base pointer for SAVE_REST
-	srlz.i			// ensure everybody knows psr.ic is back on
-	;;
-	SAVE_REST
-	;;
-	MCA_RECOVER_RANGE(interrupt)
-	alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group
-	mov out0=cr.ivr		// pass cr.ivr as first arg
-	add out1=16,sp		// pass pointer to pt_regs as second arg
-	;;
-	srlz.d			// make sure we see the effect of cr.ivr
-	movl r14=ia64_leave_kernel
-	;;
-	mov rp=r14
-	br.call.sptk.many b6=ia64_handle_irq
+	/* interrupt handler has become too big to fit this area. */
+	br.sptk.many __interrupt
 END(interrupt)
 
 	.org ia64_ivt+0x3400
@@ -978,6 +939,7 @@ END(interrupt)
 	 *	- ar.fpsr: set to kernel settings
 	 *	-  b6: preserved (same as on entry)
 	 */
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 GLOBAL_ENTRY(ia64_syscall_setup)
 #if PT(B6) != 0
 # error This code assumes that b6 is the first field in pt_regs.
@@ -1069,6 +1031,7 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 (p10)	mov r8=-EINVAL
 	br.ret.sptk.many b7
 END(ia64_syscall_setup)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
 
 	.org ia64_ivt+0x3c00
 /////////////////////////////////////////////////////////////////////////////////////////
@@ -1082,7 +1045,7 @@ END(ia64_syscall_setup)
 	DBG_FAULT(16)
 	FAULT(16)
 
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(__IA64_ASM_PARAVIRTUALIZED_NATIVE)
 	/*
 	 * There is no particular reason for this code to be here, other than
 	 * that there happens to be space here that would go unused otherwise.
@@ -1092,7 +1055,7 @@ END(ia64_syscall_setup)
 	 * account_sys_enter is called from SAVE_MIN* macros if accounting is
 	 * enabled and if the macro is entered from user mode.
 	 */
-ENTRY(account_sys_enter)
+GLOBAL_ENTRY(account_sys_enter)
 	// mov.m r20=ar.itc is called in advance, and r13 is current
 	add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13
 	add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13
@@ -1123,110 +1086,18 @@ END(account_sys_enter)
 	DBG_FAULT(17)
 	FAULT(17)
 
-ENTRY(non_syscall)
-	mov ar.rsc=r27			// restore ar.rsc before SAVE_MIN_WITH_COVER
-	;;
-	SAVE_MIN_WITH_COVER
-
-	// There is no particular reason for this code to be here, other than that
-	// there happens to be space here that would go unused otherwise.  If this
-	// fault ever gets "unreserved", simply moved the following code to a more
-	// suitable spot...
-
-	alloc r14=ar.pfs,0,0,2,0
-	mov out0=cr.iim
-	add out1=16,sp
-	adds r3=8,r2			// set up second base pointer for SAVE_REST
-
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i				// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i			// restore psr.i
-	movl r15=ia64_leave_kernel
-	;;
-	SAVE_REST
-	mov rp=r15
-	;;
-	br.call.sptk.many b6=ia64_bad_break	// avoid WAW on CFM and ignore return addr
-END(non_syscall)
-
 	.org ia64_ivt+0x4800
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4800 Entry 18 (size 64 bundles) Reserved
 	DBG_FAULT(18)
 	FAULT(18)
 
-	/*
-	 * There is no particular reason for this code to be here, other than that
-	 * there happens to be space here that would go unused otherwise.  If this
-	 * fault ever gets "unreserved", simply moved the following code to a more
-	 * suitable spot...
-	 */
-
-ENTRY(dispatch_unaligned_handler)
-	SAVE_MIN_WITH_COVER
-	;;
-	alloc r14=ar.pfs,0,0,2,0		// now it's safe (must be first in insn group!)
-	mov out0=cr.ifa
-	adds out1=16,sp
-
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	adds r3=8,r2				// set up second base pointer
-	;;
-	SAVE_REST
-	movl r14=ia64_leave_kernel
-	;;
-	mov rp=r14
-	br.sptk.many ia64_prepare_handle_unaligned
-END(dispatch_unaligned_handler)
-
 	.org ia64_ivt+0x4c00
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4c00 Entry 19 (size 64 bundles) Reserved
 	DBG_FAULT(19)
 	FAULT(19)
 
-	/*
-	 * There is no particular reason for this code to be here, other than that
-	 * there happens to be space here that would go unused otherwise.  If this
-	 * fault ever gets "unreserved", simply moved the following code to a more
-	 * suitable spot...
-	 */
-
-ENTRY(dispatch_to_fault_handler)
-	/*
-	 * Input:
-	 *	psr.ic:	off
-	 *	r19:	fault vector number (e.g., 24 for General Exception)
-	 *	r31:	contains saved predicates (pr)
-	 */
-	SAVE_MIN_WITH_COVER_R19
-	alloc r14=ar.pfs,0,0,5,0
-	mov out0=r15
-	mov out1=cr.isr
-	mov out2=cr.ifa
-	mov out3=cr.iim
-	mov out4=cr.itir
-	;;
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	adds r3=8,r2				// set up second base pointer for SAVE_REST
-	;;
-	SAVE_REST
-	movl r14=ia64_leave_kernel
-	;;
-	mov rp=r14
-	br.call.sptk.many b6=ia64_fault
-END(dispatch_to_fault_handler)
-
 //
 // --- End of long entries, Beginning of short entries
 //
@@ -1236,8 +1107,8 @@ END(dispatch_to_fault_handler)
 // 0x5000 Entry 20 (size 16 bundles) Page Not Present (10,22,49)
 ENTRY(page_not_present)
 	DBG_FAULT(20)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	/*
 	 * The Linux page fault handler doesn't expect non-present pages to be in
 	 * the TLB.  Flush the existing entry now, so we meet that expectation.
@@ -1256,8 +1127,8 @@ END(page_not_present)
 // 0x5100 Entry 21 (size 16 bundles) Key Permission (13,25,52)
 ENTRY(key_permission)
 	DBG_FAULT(21)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	mov r31=pr
 	;;
 	srlz.d
@@ -1269,8 +1140,8 @@ END(key_permission)
 // 0x5200 Entry 22 (size 16 bundles) Instruction Access Rights (26)
 ENTRY(iaccess_rights)
 	DBG_FAULT(22)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	mov r31=pr
 	;;
 	srlz.d
@@ -1282,8 +1153,8 @@ END(iaccess_rights)
 // 0x5300 Entry 23 (size 16 bundles) Data Access Rights (14,53)
 ENTRY(daccess_rights)
 	DBG_FAULT(23)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	mov r31=pr
 	;;
 	srlz.d
@@ -1295,7 +1166,7 @@ END(daccess_rights)
 // 0x5400 Entry 24 (size 16 bundles) General Exception (5,32,34,36,38,39)
 ENTRY(general_exception)
 	DBG_FAULT(24)
-	mov r16=cr.isr
+	MOV_FROM_ISR(r16)
 	mov r31=pr
 	;;
 	cmp4.eq p6,p0=0,r16
@@ -1324,8 +1195,8 @@ END(disabled_fp_reg)
 ENTRY(nat_consumption)
 	DBG_FAULT(26)
 
-	mov r16=cr.ipsr
-	mov r17=cr.isr
+	MOV_FROM_IPSR(p0, r16)
+	MOV_FROM_ISR(r17)
 	mov r31=pr				// save PR
 	;;
 	and r18=0xf,r17				// r18 = cr.ipsr.code{3:0}
@@ -1335,10 +1206,10 @@ ENTRY(nat_consumption)
 	dep r16=-1,r16,IA64_PSR_ED_BIT,1
 (p6)	br.cond.spnt 1f		// branch if (cr.ispr.na == 0 || cr.ipsr.code{3:0} != LFETCH)
 	;;
-	mov cr.ipsr=r16		// set cr.ipsr.na
+	MOV_TO_IPSR(p0, r16, r18)
 	mov pr=r31,-1
 	;;
-	rfi
+	RFI
 
 1:	mov pr=r31,-1
 	;;
@@ -1360,26 +1231,26 @@ ENTRY(speculation_vector)
 	 *
 	 * cr.imm contains zero_ext(imm21)
 	 */
-	mov r18=cr.iim
+	MOV_FROM_IIM(r18)
 	;;
-	mov r17=cr.iip
+	MOV_FROM_IIP(r17)
 	shl r18=r18,43			// put sign bit in position (43=64-21)
 	;;
 
-	mov r16=cr.ipsr
+	MOV_FROM_IPSR(p0, r16)
 	shr r18=r18,39			// sign extend (39=43-4)
 	;;
 
 	add r17=r17,r18			// now add the offset
 	;;
-	mov cr.iip=r17
+	MOV_FROM_IIP(r17)
 	dep r16=0,r16,41,2		// clear EI
 	;;
 
-	mov cr.ipsr=r16
+	MOV_FROM_IPSR(p0, r16)
 	;;
 
-	rfi				// and go back
+	RFI
 END(speculation_vector)
 
 	.org ia64_ivt+0x5800
@@ -1517,11 +1388,11 @@ ENTRY(ia32_intercept)
 	DBG_FAULT(46)
 #ifdef	CONFIG_IA32_SUPPORT
 	mov r31=pr
-	mov r16=cr.isr
+	MOV_FROM_ISR(r16)
 	;;
 	extr.u r17=r16,16,8	// get ISR.code
 	mov r18=ar.eflag
-	mov r19=cr.iim		// old eflag value
+	MOV_FROM_IIM(r19)	// old eflag value
 	;;
 	cmp.ne p6,p0=2,r17
 (p6)	br.cond.spnt 1f		// not a system flag fault
@@ -1533,7 +1404,7 @@ ENTRY(ia32_intercept)
 (p6)	br.cond.spnt 1f		// eflags.ac bit didn't change
 	;;
 	mov pr=r31,-1		// restore predicate registers
-	rfi
+	RFI
 
 1:
 #endif	// CONFIG_IA32_SUPPORT
@@ -1673,6 +1544,137 @@ END(ia32_interrupt)
 	DBG_FAULT(67)
 	FAULT(67)
 
+	//-----------------------------------------------------------------------------------
+	// call do_page_fault (predicates are in r31, psr.dt may be off, r16 is faulting address)
+ENTRY(page_fault)
+	SSM_PSR_DT_AND_SRLZ_I
+	;;
+	SAVE_MIN_WITH_COVER
+	alloc r15=ar.pfs,0,0,3,0
+	MOV_FROM_IFA(out0)
+	MOV_FROM_ISR(out1)
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r14, r3)
+	adds r3=8,r2				// set up second base pointer
+	SSM_PSR_I(p15, p15, r14)		// restore psr.i
+	movl r14=ia64_leave_kernel
+	;;
+	SAVE_REST
+	mov rp=r14
+	;;
+	adds out2=16,r12			// out2 = pointer to pt_regs
+	br.call.sptk.many b6=ia64_do_page_fault	// ignore return address
+END(page_fault)
+
+ENTRY(non_syscall)
+	mov ar.rsc=r27			// restore ar.rsc before SAVE_MIN_WITH_COVER
+	;;
+	SAVE_MIN_WITH_COVER
+
+	// There is no particular reason for this code to be here, other than that
+	// there happens to be space here that would go unused otherwise.  If this
+	// fault ever gets "unreserved", simply moved the following code to a more
+	// suitable spot...
+
+	alloc r14=ar.pfs,0,0,2,0
+	MOV_FROM_IIM(out0)
+	add out1=16,sp
+	adds r3=8,r2			// set up second base pointer for SAVE_REST
+
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r15, r24)
+					// guarantee that interruption collection is on
+	SSM_PSR_I(p15, p15, r15)	// restore psr.i
+	movl r15=ia64_leave_kernel
+	;;
+	SAVE_REST
+	mov rp=r15
+	;;
+	br.call.sptk.many b6=ia64_bad_break	// avoid WAW on CFM and ignore return addr
+END(non_syscall)
+
+ENTRY(__interrupt)
+	DBG_FAULT(12)
+	mov r31=pr		// prepare to save predicates
+	;;
+	SAVE_MIN_WITH_COVER	// uses r31; defines r2 and r3
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r14)
+				// ensure everybody knows psr.ic is back on
+	adds r3=8,r2		// set up second base pointer for SAVE_REST
+	;;
+	SAVE_REST
+	;;
+	MCA_RECOVER_RANGE(interrupt)
+	alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group
+	MOV_FROM_IVR(out0, r8)	// pass cr.ivr as first arg
+	add out1=16,sp		// pass pointer to pt_regs as second arg
+	;;
+	srlz.d			// make sure we see the effect of cr.ivr
+	movl r14=ia64_leave_kernel
+	;;
+	mov rp=r14
+	br.call.sptk.many b6=ia64_handle_irq
+END(__interrupt)
+
+	/*
+	 * There is no particular reason for this code to be here, other than that
+	 * there happens to be space here that would go unused otherwise.  If this
+	 * fault ever gets "unreserved", simply moved the following code to a more
+	 * suitable spot...
+	 */
+
+ENTRY(dispatch_unaligned_handler)
+	SAVE_MIN_WITH_COVER
+	;;
+	alloc r14=ar.pfs,0,0,2,0		// now it's safe (must be first in insn group!)
+	MOV_FROM_IFA(out0)
+	adds out1=16,sp
+
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+						// guarantee that interruption collection is on
+	SSM_PSR_I(p15, p15, r3)			// restore psr.i
+	adds r3=8,r2				// set up second base pointer
+	;;
+	SAVE_REST
+	movl r14=ia64_leave_kernel
+	;;
+	mov rp=r14
+	br.sptk.many ia64_prepare_handle_unaligned
+END(dispatch_unaligned_handler)
+
+	/*
+	 * There is no particular reason for this code to be here, other than that
+	 * there happens to be space here that would go unused otherwise.  If this
+	 * fault ever gets "unreserved", simply moved the following code to a more
+	 * suitable spot...
+	 */
+
+ENTRY(dispatch_to_fault_handler)
+	/*
+	 * Input:
+	 *	psr.ic:	off
+	 *	r19:	fault vector number (e.g., 24 for General Exception)
+	 *	r31:	contains saved predicates (pr)
+	 */
+	SAVE_MIN_WITH_COVER_R19
+	alloc r14=ar.pfs,0,0,5,0
+	MOV_FROM_ISR(out1)
+	MOV_FROM_IFA(out2)
+	MOV_FROM_IIM(out3)
+	MOV_FROM_ITIR(out4)
+	;;
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, out0)
+						// guarantee that interruption collection is on
+	mov out0=r15
+	;;
+	SSM_PSR_I(p15, p15, r3)			// restore psr.i
+	adds r3=8,r2				// set up second base pointer for SAVE_REST
+	;;
+	SAVE_REST
+	movl r14=ia64_leave_kernel
+	;;
+	mov rp=r14
+	br.call.sptk.many b6=ia64_fault
+END(dispatch_to_fault_handler)
+
 	/*
 	 * Squatting in this space ...
 	 *
@@ -1686,11 +1688,10 @@ ENTRY(dispatch_illegal_op_fault)
 	.prologue
 	.body
 	SAVE_MIN_WITH_COVER
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i		// guarantee that interruption collection is on
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+				// guarantee that interruption collection is on
 	;;
-(p15)	ssm psr.i	// restore psr.i
+	SSM_PSR_I(p15, p15, r3)	// restore psr.i
 	adds r3=8,r2	// set up second base pointer for SAVE_REST
 	;;
 	alloc r14=ar.pfs,0,0,1,0	// must be first in insn group
@@ -1729,12 +1730,11 @@ END(dispatch_illegal_op_fault)
 ENTRY(dispatch_to_ia32_handler)
 	SAVE_MIN
 	;;
-	mov r14=cr.isr
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
+	MOV_FROM_ISR(r14)
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+				// guarantee that interruption collection is on
 	;;
-(p15)	ssm psr.i
+	SSM_PSR_I(p15, p15, r3)
 	adds r3=8,r2		// Base pointer for SAVE_REST
 	;;
 	SAVE_REST
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 233434f4f88f..f07688da947c 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -429,8 +429,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 		((struct fnptr *)kretprobe_trampoline)->ip;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -485,7 +484,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
@@ -500,7 +499,6 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	return 1;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 705176b434b3..7dd96c127177 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -707,7 +707,7 @@ ia64_mca_cmc_vector_enable (void *dummy)
 static void
 ia64_mca_cmc_vector_disable_keventd(struct work_struct *unused)
 {
-	on_each_cpu(ia64_mca_cmc_vector_disable, NULL, 1, 0);
+	on_each_cpu(ia64_mca_cmc_vector_disable, NULL, 0);
 }
 
 /*
@@ -719,7 +719,7 @@ ia64_mca_cmc_vector_disable_keventd(struct work_struct *unused)
 static void
 ia64_mca_cmc_vector_enable_keventd(struct work_struct *unused)
 {
-	on_each_cpu(ia64_mca_cmc_vector_enable, NULL, 1, 0);
+	on_each_cpu(ia64_mca_cmc_vector_enable, NULL, 0);
 }
 
 /*
@@ -1881,7 +1881,7 @@ static int __cpuinit mca_cpu_callback(struct notifier_block *nfb,
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		smp_call_function_single(hotcpu, ia64_mca_cmc_vector_adjust,
-					 NULL, 1, 0);
+					 NULL, 0);
 		break;
 	}
 	return NOTIFY_OK;
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 74b6d670aaef..292e214a3b84 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -2,6 +2,7 @@
 #include <asm/cache.h>
 
 #include "entry.h"
+#include "paravirt_inst.h"
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 /* read ar.itc in advance, and use it before leaving bank 0 */
@@ -43,16 +44,16 @@
  * Note that psr.ic is NOT turned on by this macro.  This is so that
  * we can pass interruption state as arguments to a handler.
  */
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND)						\
+#define IA64_NATIVE_DO_SAVE_MIN(__COVER,SAVE_IFS,EXTRA,WORKAROUND)				\
 	mov r16=IA64_KR(CURRENT);	/* M */							\
 	mov r27=ar.rsc;			/* M */							\
 	mov r20=r1;			/* A */							\
 	mov r25=ar.unat;		/* M */							\
-	mov r29=cr.ipsr;		/* M */							\
+	MOV_FROM_IPSR(p0,r29);		/* M */							\
 	mov r26=ar.pfs;			/* I */							\
-	mov r28=cr.iip;			/* M */							\
+	MOV_FROM_IIP(r28);			/* M */						\
 	mov r21=ar.fpsr;		/* M */							\
-	COVER;				/* B;; (or nothing) */					\
+	__COVER;				/* B;; (or nothing) */				\
 	;;											\
 	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16;						\
 	;;											\
@@ -244,6 +245,6 @@
 1:						\
 	.pred.rel "mutex", pKStk, pUStk
 
-#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
-#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(COVER, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(COVER, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
 #define SAVE_MIN			DO_SAVE_MIN(     , mov r30=r0, , )
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index e83e2ea3b3e0..29aad349e0c4 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -321,7 +321,8 @@ module_alloc (unsigned long size)
 void
 module_free (struct module *mod, void *module_region)
 {
-	if (mod->arch.init_unw_table && module_region == mod->module_init) {
+	if (mod && mod->arch.init_unw_table &&
+	    module_region == mod->module_init) {
 		unw_remove_unwind_table(mod->arch.init_unw_table);
 		mod->arch.init_unw_table = NULL;
 	}
diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c
new file mode 100644
index 000000000000..1ae049181e83
--- /dev/null
+++ b/arch/ia64/kernel/nr-irqs.c
@@ -0,0 +1,24 @@
+/*
+ * calculate
+ * NR_IRQS = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, FOO_NR_IRQS...)
+ * depending on config.
+ * This must be calculated before processing asm-offset.c.
+ */
+
+#define ASM_OFFSETS_C 1
+
+#include <linux/kbuild.h>
+#include <linux/threads.h>
+#include <asm-ia64/native/irq.h>
+
+void foo(void)
+{
+	union paravirt_nr_irqs_max {
+		char ia64_native_nr_irqs[IA64_NATIVE_NR_IRQS];
+#ifdef CONFIG_XEN
+		char xen_nr_irqs[XEN_NR_IRQS];
+#endif
+	};
+
+	DEFINE(NR_IRQS, sizeof (union paravirt_nr_irqs_max));
+}
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 9dc00f7fe10e..e5c57f413ca2 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -921,7 +921,7 @@ int palinfo_handle_smp(pal_func_cpu_u_t *f, char *page)
 
 
 	/* will send IPI to other CPU and wait for completion of remote call */
-	if ((ret=smp_call_function_single(f->req_cpu, palinfo_smp_call, &ptr, 0, 1))) {
+	if ((ret=smp_call_function_single(f->req_cpu, palinfo_smp_call, &ptr, 1))) {
 		printk(KERN_ERR "palinfo: remote CPU call from %d to %d on function %d: "
 		       "error %d\n", smp_processor_id(), f->req_cpu, f->func_id, ret);
 		return 0;
diff --git a/arch/ia64/kernel/paravirt.c b/arch/ia64/kernel/paravirt.c
new file mode 100644
index 000000000000..afaf5b9a2cf0
--- /dev/null
+++ b/arch/ia64/kernel/paravirt.c
@@ -0,0 +1,369 @@
+/******************************************************************************
+ * arch/ia64/kernel/paravirt.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *     Yaozu (Eddie) Dong <eddie.dong@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <asm/iosapic.h>
+#include <asm/paravirt.h>
+
+/***************************************************************************
+ * general info
+ */
+struct pv_info pv_info = {
+	.kernel_rpl = 0,
+	.paravirt_enabled = 0,
+	.name = "bare hardware"
+};
+
+/***************************************************************************
+ * pv_init_ops
+ * initialization hooks.
+ */
+
+struct pv_init_ops pv_init_ops;
+
+/***************************************************************************
+ * pv_cpu_ops
+ * intrinsics hooks.
+ */
+
+/* ia64_native_xxx are macros so that we have to make them real functions */
+
+#define DEFINE_VOID_FUNC1(name)					\
+	static void						\
+	ia64_native_ ## name ## _func(unsigned long arg)	\
+	{							\
+		ia64_native_ ## name(arg);			\
+	}							\
+
+#define DEFINE_VOID_FUNC2(name)					\
+	static void						\
+	ia64_native_ ## name ## _func(unsigned long arg0,	\
+				      unsigned long arg1)	\
+	{							\
+		ia64_native_ ## name(arg0, arg1);		\
+	}							\
+
+#define DEFINE_FUNC0(name)			\
+	static unsigned long			\
+	ia64_native_ ## name ## _func(void)	\
+	{					\
+		return ia64_native_ ## name();	\
+	}
+
+#define DEFINE_FUNC1(name, type)			\
+	static unsigned long				\
+	ia64_native_ ## name ## _func(type arg)		\
+	{						\
+		return ia64_native_ ## name(arg);	\
+	}						\
+
+DEFINE_VOID_FUNC1(fc);
+DEFINE_VOID_FUNC1(intrin_local_irq_restore);
+
+DEFINE_VOID_FUNC2(ptcga);
+DEFINE_VOID_FUNC2(set_rr);
+
+DEFINE_FUNC0(get_psr_i);
+
+DEFINE_FUNC1(thash, unsigned long);
+DEFINE_FUNC1(get_cpuid, int);
+DEFINE_FUNC1(get_pmd, int);
+DEFINE_FUNC1(get_rr, unsigned long);
+
+static void
+ia64_native_ssm_i_func(void)
+{
+	ia64_native_ssm(IA64_PSR_I);
+}
+
+static void
+ia64_native_rsm_i_func(void)
+{
+	ia64_native_rsm(IA64_PSR_I);
+}
+
+static void
+ia64_native_set_rr0_to_rr4_func(unsigned long val0, unsigned long val1,
+				unsigned long val2, unsigned long val3,
+				unsigned long val4)
+{
+	ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4);
+}
+
+#define CASE_GET_REG(id)				\
+	case _IA64_REG_ ## id:				\
+	res = ia64_native_getreg(_IA64_REG_ ## id);	\
+	break;
+#define CASE_GET_AR(id) CASE_GET_REG(AR_ ## id)
+#define CASE_GET_CR(id) CASE_GET_REG(CR_ ## id)
+
+unsigned long
+ia64_native_getreg_func(int regnum)
+{
+	unsigned long res = -1;
+	switch (regnum) {
+	CASE_GET_REG(GP);
+	CASE_GET_REG(IP);
+	CASE_GET_REG(PSR);
+	CASE_GET_REG(TP);
+	CASE_GET_REG(SP);
+
+	CASE_GET_AR(KR0);
+	CASE_GET_AR(KR1);
+	CASE_GET_AR(KR2);
+	CASE_GET_AR(KR3);
+	CASE_GET_AR(KR4);
+	CASE_GET_AR(KR5);
+	CASE_GET_AR(KR6);
+	CASE_GET_AR(KR7);
+	CASE_GET_AR(RSC);
+	CASE_GET_AR(BSP);
+	CASE_GET_AR(BSPSTORE);
+	CASE_GET_AR(RNAT);
+	CASE_GET_AR(FCR);
+	CASE_GET_AR(EFLAG);
+	CASE_GET_AR(CSD);
+	CASE_GET_AR(SSD);
+	CASE_GET_AR(CFLAG);
+	CASE_GET_AR(FSR);
+	CASE_GET_AR(FIR);
+	CASE_GET_AR(FDR);
+	CASE_GET_AR(CCV);
+	CASE_GET_AR(UNAT);
+	CASE_GET_AR(FPSR);
+	CASE_GET_AR(ITC);
+	CASE_GET_AR(PFS);
+	CASE_GET_AR(LC);
+	CASE_GET_AR(EC);
+
+	CASE_GET_CR(DCR);
+	CASE_GET_CR(ITM);
+	CASE_GET_CR(IVA);
+	CASE_GET_CR(PTA);
+	CASE_GET_CR(IPSR);
+	CASE_GET_CR(ISR);
+	CASE_GET_CR(IIP);
+	CASE_GET_CR(IFA);
+	CASE_GET_CR(ITIR);
+	CASE_GET_CR(IIPA);
+	CASE_GET_CR(IFS);
+	CASE_GET_CR(IIM);
+	CASE_GET_CR(IHA);
+	CASE_GET_CR(LID);
+	CASE_GET_CR(IVR);
+	CASE_GET_CR(TPR);
+	CASE_GET_CR(EOI);
+	CASE_GET_CR(IRR0);
+	CASE_GET_CR(IRR1);
+	CASE_GET_CR(IRR2);
+	CASE_GET_CR(IRR3);
+	CASE_GET_CR(ITV);
+	CASE_GET_CR(PMV);
+	CASE_GET_CR(CMCV);
+	CASE_GET_CR(LRR0);
+	CASE_GET_CR(LRR1);
+
+	default:
+		printk(KERN_CRIT "wrong_getreg %d\n", regnum);
+		break;
+	}
+	return res;
+}
+
+#define CASE_SET_REG(id)				\
+	case _IA64_REG_ ## id:				\
+	ia64_native_setreg(_IA64_REG_ ## id, val);	\
+	break;
+#define CASE_SET_AR(id) CASE_SET_REG(AR_ ## id)
+#define CASE_SET_CR(id) CASE_SET_REG(CR_ ## id)
+
+void
+ia64_native_setreg_func(int regnum, unsigned long val)
+{
+	switch (regnum) {
+	case _IA64_REG_PSR_L:
+		ia64_native_setreg(_IA64_REG_PSR_L, val);
+		ia64_dv_serialize_data();
+		break;
+	CASE_SET_REG(SP);
+	CASE_SET_REG(GP);
+
+	CASE_SET_AR(KR0);
+	CASE_SET_AR(KR1);
+	CASE_SET_AR(KR2);
+	CASE_SET_AR(KR3);
+	CASE_SET_AR(KR4);
+	CASE_SET_AR(KR5);
+	CASE_SET_AR(KR6);
+	CASE_SET_AR(KR7);
+	CASE_SET_AR(RSC);
+	CASE_SET_AR(BSP);
+	CASE_SET_AR(BSPSTORE);
+	CASE_SET_AR(RNAT);
+	CASE_SET_AR(FCR);
+	CASE_SET_AR(EFLAG);
+	CASE_SET_AR(CSD);
+	CASE_SET_AR(SSD);
+	CASE_SET_AR(CFLAG);
+	CASE_SET_AR(FSR);
+	CASE_SET_AR(FIR);
+	CASE_SET_AR(FDR);
+	CASE_SET_AR(CCV);
+	CASE_SET_AR(UNAT);
+	CASE_SET_AR(FPSR);
+	CASE_SET_AR(ITC);
+	CASE_SET_AR(PFS);
+	CASE_SET_AR(LC);
+	CASE_SET_AR(EC);
+
+	CASE_SET_CR(DCR);
+	CASE_SET_CR(ITM);
+	CASE_SET_CR(IVA);
+	CASE_SET_CR(PTA);
+	CASE_SET_CR(IPSR);
+	CASE_SET_CR(ISR);
+	CASE_SET_CR(IIP);
+	CASE_SET_CR(IFA);
+	CASE_SET_CR(ITIR);
+	CASE_SET_CR(IIPA);
+	CASE_SET_CR(IFS);
+	CASE_SET_CR(IIM);
+	CASE_SET_CR(IHA);
+	CASE_SET_CR(LID);
+	CASE_SET_CR(IVR);
+	CASE_SET_CR(TPR);
+	CASE_SET_CR(EOI);
+	CASE_SET_CR(IRR0);
+	CASE_SET_CR(IRR1);
+	CASE_SET_CR(IRR2);
+	CASE_SET_CR(IRR3);
+	CASE_SET_CR(ITV);
+	CASE_SET_CR(PMV);
+	CASE_SET_CR(CMCV);
+	CASE_SET_CR(LRR0);
+	CASE_SET_CR(LRR1);
+	default:
+		printk(KERN_CRIT "wrong setreg %d\n", regnum);
+		break;
+	}
+}
+
+struct pv_cpu_ops pv_cpu_ops = {
+	.fc		= ia64_native_fc_func,
+	.thash		= ia64_native_thash_func,
+	.get_cpuid	= ia64_native_get_cpuid_func,
+	.get_pmd	= ia64_native_get_pmd_func,
+	.ptcga		= ia64_native_ptcga_func,
+	.get_rr		= ia64_native_get_rr_func,
+	.set_rr		= ia64_native_set_rr_func,
+	.set_rr0_to_rr4	= ia64_native_set_rr0_to_rr4_func,
+	.ssm_i		= ia64_native_ssm_i_func,
+	.getreg		= ia64_native_getreg_func,
+	.setreg		= ia64_native_setreg_func,
+	.rsm_i		= ia64_native_rsm_i_func,
+	.get_psr_i	= ia64_native_get_psr_i_func,
+	.intrin_local_irq_restore
+			= ia64_native_intrin_local_irq_restore_func,
+};
+EXPORT_SYMBOL(pv_cpu_ops);
+
+/******************************************************************************
+ * replacement of hand written assembly codes.
+ */
+
+void
+paravirt_cpu_asm_init(const struct pv_cpu_asm_switch *cpu_asm_switch)
+{
+	extern unsigned long paravirt_switch_to_targ;
+	extern unsigned long paravirt_leave_syscall_targ;
+	extern unsigned long paravirt_work_processed_syscall_targ;
+	extern unsigned long paravirt_leave_kernel_targ;
+
+	paravirt_switch_to_targ = cpu_asm_switch->switch_to;
+	paravirt_leave_syscall_targ = cpu_asm_switch->leave_syscall;
+	paravirt_work_processed_syscall_targ =
+		cpu_asm_switch->work_processed_syscall;
+	paravirt_leave_kernel_targ = cpu_asm_switch->leave_kernel;
+}
+
+/***************************************************************************
+ * pv_iosapic_ops
+ * iosapic read/write hooks.
+ */
+
+static unsigned int
+ia64_native_iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	return __ia64_native_iosapic_read(iosapic, reg);
+}
+
+static void
+ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	__ia64_native_iosapic_write(iosapic, reg, val);
+}
+
+struct pv_iosapic_ops pv_iosapic_ops = {
+	.pcat_compat_init = ia64_native_iosapic_pcat_compat_init,
+	.get_irq_chip = ia64_native_iosapic_get_irq_chip,
+
+	.__read = ia64_native_iosapic_read,
+	.__write = ia64_native_iosapic_write,
+};
+
+/***************************************************************************
+ * pv_irq_ops
+ * irq operations
+ */
+
+struct pv_irq_ops pv_irq_ops = {
+	.register_ipi = ia64_native_register_ipi,
+
+	.assign_irq_vector = ia64_native_assign_irq_vector,
+	.free_irq_vector = ia64_native_free_irq_vector,
+	.register_percpu_irq = ia64_native_register_percpu_irq,
+
+	.resend_irq = ia64_native_resend_irq,
+};
+
+/***************************************************************************
+ * pv_time_ops
+ * time operations
+ */
+
+static int
+ia64_native_do_steal_accounting(unsigned long *new_itm)
+{
+	return 0;
+}
+
+struct pv_time_ops pv_time_ops = {
+	.do_steal_accounting = ia64_native_do_steal_accounting,
+};
diff --git a/arch/ia64/kernel/paravirt_inst.h b/arch/ia64/kernel/paravirt_inst.h
new file mode 100644
index 000000000000..5cad6fb2ed19
--- /dev/null
+++ b/arch/ia64/kernel/paravirt_inst.h
@@ -0,0 +1,29 @@
+/******************************************************************************
+ * linux/arch/ia64/xen/paravirt_inst.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifdef __IA64_ASM_PARAVIRTUALIZED_XEN
+#include <asm/xen/inst.h>
+#include <asm/xen/minstate.h>
+#else
+#include <asm/native/inst.h>
+#endif
+
diff --git a/arch/ia64/kernel/paravirtentry.S b/arch/ia64/kernel/paravirtentry.S
new file mode 100644
index 000000000000..2f42fcb9776a
--- /dev/null
+++ b/arch/ia64/kernel/paravirtentry.S
@@ -0,0 +1,60 @@
+/******************************************************************************
+ * linux/arch/ia64/xen/paravirtentry.S
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/asm-offsets.h>
+#include "entry.h"
+
+#define DATA8(sym, init_value)			\
+	.pushsection .data.read_mostly ;	\
+	.align 8 ;				\
+	.global sym ;				\
+	sym: ;					\
+	data8 init_value ;			\
+	.popsection
+
+#define BRANCH(targ, reg, breg)		\
+	movl reg=targ ;			\
+	;;				\
+	ld8 reg=[reg] ;			\
+	;;				\
+	mov breg=reg ;			\
+	br.cond.sptk.many breg
+
+#define BRANCH_PROC(sym, reg, breg)				\
+	DATA8(paravirt_ ## sym ## _targ, ia64_native_ ## sym) ; \
+	GLOBAL_ENTRY(paravirt_ ## sym) ;			\
+		BRANCH(paravirt_ ## sym ## _targ, reg, breg) ;	\
+	END(paravirt_ ## sym)
+
+#define BRANCH_PROC_UNWINFO(sym, reg, breg)			\
+	DATA8(paravirt_ ## sym ## _targ, ia64_native_ ## sym) ; \
+	GLOBAL_ENTRY(paravirt_ ## sym) ;			\
+		PT_REGS_UNWIND_INFO(0) ;			\
+		BRANCH(paravirt_ ## sym ## _targ, reg, breg) ;	\
+	END(paravirt_ ## sym)
+
+
+BRANCH_PROC(switch_to, r22, b7)
+BRANCH_PROC_UNWINFO(leave_syscall, r22, b7)
+BRANCH_PROC(work_processed_syscall, r2, b7)
+BRANCH_PROC_UNWINFO(leave_kernel, r22, b7)
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 7714a97b0104..fc8f3509df27 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -1820,7 +1820,7 @@ pfm_syswide_cleanup_other_cpu(pfm_context_t *ctx)
 	int ret;
 
 	DPRINT(("calling CPU%d for cleanup\n", ctx->ctx_cpu));
-	ret = smp_call_function_single(ctx->ctx_cpu, pfm_syswide_force_stop, ctx, 0, 1);
+	ret = smp_call_function_single(ctx->ctx_cpu, pfm_syswide_force_stop, ctx, 1);
 	DPRINT(("called CPU%d for cleanup ret=%d\n", ctx->ctx_cpu, ret));
 }
 #endif /* CONFIG_SMP */
@@ -2626,7 +2626,7 @@ pfm_task_incompatible(pfm_context_t *ctx, struct task_struct *task)
 	/*
 	 * make sure the task is off any CPU
 	 */
-	wait_task_inactive(task);
+	wait_task_inactive(task, 0);
 
 	/* more to come... */
 
@@ -4774,7 +4774,7 @@ recheck:
 
 		UNPROTECT_CTX(ctx, flags);
 
-		wait_task_inactive(task);
+		wait_task_inactive(task, 0);
 
 		PROTECT_CTX(ctx, flags);
 
@@ -6508,7 +6508,7 @@ pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
 	}
 
 	/* save the current system wide pmu states */
-	ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 0, 1);
+	ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 1);
 	if (ret) {
 		DPRINT(("on_each_cpu() failed: %d\n", ret));
 		goto cleanup_reserve;
@@ -6553,7 +6553,7 @@ pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
 
 	pfm_alt_intr_handler = NULL;
 
-	ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 0, 1);
+	ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 1);
 	if (ret) {
 		DPRINT(("on_each_cpu() failed: %d\n", ret));
 	}
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index a3a34b4eb038..3ab8373103ec 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -55,6 +55,10 @@ void (*ia64_mark_idle)(int);
 
 unsigned long boot_option_idle_override = 0;
 EXPORT_SYMBOL(boot_option_idle_override);
+unsigned long idle_halt;
+EXPORT_SYMBOL(idle_halt);
+unsigned long idle_nomwait;
+EXPORT_SYMBOL(idle_nomwait);
 
 void
 ia64_do_show_stack (struct unw_frame_info *info, void *arg)
@@ -286,7 +290,7 @@ void cpu_idle_wait(void)
 {
 	smp_mb();
 	/* kick all the CPUs so that they exit out of pm_idle */
-	smp_call_function(do_nothing, NULL, 0, 1);
+	smp_call_function(do_nothing, NULL, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 632cda8f2e76..e5c2de9b29a5 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -51,6 +51,7 @@
 #include <asm/mca.h>
 #include <asm/meminit.h>
 #include <asm/page.h>
+#include <asm/paravirt.h>
 #include <asm/patch.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -341,6 +342,8 @@ reserve_memory (void)
 	rsvd_region[n].end   = (unsigned long) ia64_imva(_end);
 	n++;
 
+	n += paravirt_reserve_memory(&rsvd_region[n]);
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (ia64_boot_param->initrd_start) {
 		rsvd_region[n].start = (unsigned long)__va(ia64_boot_param->initrd_start);
@@ -519,6 +522,8 @@ setup_arch (char **cmdline_p)
 {
 	unw_init();
 
+	paravirt_arch_setup_early();
+
 	ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
 
 	*cmdline_p = __va(ia64_boot_param->command_line);
@@ -583,6 +588,9 @@ setup_arch (char **cmdline_p)
 	acpi_boot_init();
 #endif
 
+	paravirt_banner();
+	paravirt_arch_setup_console(cmdline_p);
+
 #ifdef CONFIG_VT
 	if (!conswitchp) {
 # if defined(CONFIG_DUMMY_CONSOLE)
@@ -602,6 +610,8 @@ setup_arch (char **cmdline_p)
 #endif
 
 	/* enable IA-64 Machine Check Abort Handling unless disabled */
+	if (paravirt_arch_setup_nomca())
+		nomca = 1;
 	if (!nomca)
 		ia64_mca_init();
 
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 983296f1c813..3676468612b6 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -60,25 +60,9 @@ static struct local_tlb_flush_counts {
 
 static DEFINE_PER_CPU(unsigned int, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
 
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise static memory
- * requirements. It also looks cleaner.
- */
-static  __cacheline_aligned DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	long wait;
-	atomic_t started;
-	atomic_t finished;
-};
-
-static volatile struct call_data_struct *call_data;
-
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
+#define IPI_CALL_FUNC_SINGLE	2
 #define IPI_KDUMP_CPU_STOP	3
 
 /* This needs to be cacheline aligned because it is written to by *other* CPUs.  */
@@ -86,43 +70,6 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(u64, ipi_operation);
 
 extern void cpu_halt (void);
 
-void
-lock_ipi_calllock(void)
-{
-	spin_lock_irq(&call_lock);
-}
-
-void
-unlock_ipi_calllock(void)
-{
-	spin_unlock_irq(&call_lock);
-}
-
-static inline void
-handle_call_data(void)
-{
-	struct call_data_struct *data;
-	void (*func)(void *info);
-	void *info;
-	int wait;
-
-	/* release the 'pointer lock' */
-	data = (struct call_data_struct *)call_data;
-	func = data->func;
-	info = data->info;
-	wait = data->wait;
-
-	mb();
-	atomic_inc(&data->started);
-	/* At this point the structure may be gone unless wait is true. */
-	(*func)(info);
-
-	/* Notify the sending CPU that the task is done. */
-	mb();
-	if (wait)
-		atomic_inc(&data->finished);
-}
-
 static void
 stop_this_cpu(void)
 {
@@ -163,13 +110,15 @@ handle_IPI (int irq, void *dev_id)
 			ops &= ~(1 << which);
 
 			switch (which) {
-			case IPI_CALL_FUNC:
-				handle_call_data();
-				break;
-
 			case IPI_CPU_STOP:
 				stop_this_cpu();
 				break;
+			case IPI_CALL_FUNC:
+				generic_smp_call_function_interrupt();
+				break;
+			case IPI_CALL_FUNC_SINGLE:
+				generic_smp_call_function_single_interrupt();
+				break;
 #ifdef CONFIG_KEXEC
 			case IPI_KDUMP_CPU_STOP:
 				unw_init_running(kdump_cpu_freeze, NULL);
@@ -187,6 +136,8 @@ handle_IPI (int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+
+
 /*
  * Called with preemption disabled.
  */
@@ -334,7 +285,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 void
 smp_flush_tlb_all (void)
 {
-	on_each_cpu((void (*)(void *))local_flush_tlb_all, NULL, 1, 1);
+	on_each_cpu((void (*)(void *))local_flush_tlb_all, NULL, 1);
 }
 
 void
@@ -357,193 +308,18 @@ smp_flush_tlb_mm (struct mm_struct *mm)
 	 * anyhow, and once a CPU is interrupted, the cost of local_flush_tlb_all() is
 	 * rather trivial.
 	 */
-	on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1, 1);
+	on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
 }
 
-/*
- * Run a function on a specific CPU
- *  <func>	The function to run. This must be fast and non-blocking.
- *  <info>	An arbitrary pointer to pass to the function.
- *  <nonatomic>	Currently unused.
- *  <wait>	If true, wait until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until the remote CPU is nearly ready to execute <func>
- * or is or has executed.
- */
-
-int
-smp_call_function_single (int cpuid, void (*func) (void *info), void *info, int nonatomic,
-			  int wait)
-{
-	struct call_data_struct data;
-	int cpus = 1;
-	int me = get_cpu(); /* prevent preemption and reschedule on another processor */
-
-	if (cpuid == me) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-		put_cpu();
-		return 0;
-	}
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	spin_lock_bh(&call_lock);
-
-	call_data = &data;
-	mb();	/* ensure store to call_data precedes setting of IPI_CALL_FUNC */
-  	send_IPI_single(cpuid, IPI_CALL_FUNC);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-	call_data = NULL;
-
-	spin_unlock_bh(&call_lock);
-	put_cpu();
-	return 0;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
-/**
- * smp_call_function_mask(): Run a function on a set of other CPUs.
- * <mask>	The set of cpus to run on.  Must not include the current cpu.
- * <func> 	The function to run. This must be fast and non-blocking.
- * <info>	An arbitrary pointer to pass to the function.
- * <wait>	If true, wait (atomically) until function
- *		has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function_mask(cpumask_t mask,
-			   void (*func)(void *), void *info,
-			   int wait)
+void arch_send_call_function_single_ipi(int cpu)
 {
-	struct call_data_struct data;
-	cpumask_t allbutself;
-	int cpus;
-
-	spin_lock(&call_lock);
-	allbutself = cpu_online_map;
-	cpu_clear(smp_processor_id(), allbutself);
-
-	cpus_and(mask, mask, allbutself);
-	cpus = cpus_weight(mask);
-	if (!cpus) {
-		spin_unlock(&call_lock);
-		return 0;
-	}
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb(); /* ensure store to call_data precedes setting of IPI_CALL_FUNC*/
-
-	/* Send a message to other CPUs */
-	if (cpus_equal(mask, allbutself))
-		send_IPI_allbutself(IPI_CALL_FUNC);
-	else
-		send_IPI_mask(mask, IPI_CALL_FUNC);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-	call_data = NULL;
-
-	spin_unlock(&call_lock);
-	return 0;
-
+	send_IPI_single(cpu, IPI_CALL_FUNC_SINGLE);
 }
-EXPORT_SYMBOL(smp_call_function_mask);
 
-/*
- * this function sends a 'generic call function' IPI to all other CPUs
- * in the system.
- */
-
-/*
- *  [SUMMARY]	Run a function on all other CPUs.
- *  <func>	The function to run. This must be fast and non-blocking.
- *  <info>	An arbitrary pointer to pass to the function.
- *  <nonatomic>	currently unused.
- *  <wait>	If true, wait (atomically) until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until remote CPUs are nearly ready to execute <func> or are or have
- * executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int
-smp_call_function (void (*func) (void *info), void *info, int nonatomic, int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct call_data_struct data;
-	int cpus;
-
-	spin_lock(&call_lock);
-	cpus = num_online_cpus() - 1;
-	if (!cpus) {
-		spin_unlock(&call_lock);
-		return 0;
-	}
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb();	/* ensure store to call_data precedes setting of IPI_CALL_FUNC */
-	send_IPI_allbutself(IPI_CALL_FUNC);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-	call_data = NULL;
-
-	spin_unlock(&call_lock);
-	return 0;
+	send_IPI_mask(mask, IPI_CALL_FUNC);
 }
-EXPORT_SYMBOL(smp_call_function);
 
 /*
  * this function calls the 'stop' function on all other CPUs in the system.
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index d7ad42b77d41..03f1a9908afc 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -50,6 +50,7 @@
 #include <asm/machvec.h>
 #include <asm/mca.h>
 #include <asm/page.h>
+#include <asm/paravirt.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -317,7 +318,7 @@ ia64_sync_itc (unsigned int master)
 
 	go[MASTER] = 1;
 
-	if (smp_call_function_single(master, sync_master, NULL, 1, 0) < 0) {
+	if (smp_call_function_single(master, sync_master, NULL, 0) < 0) {
 		printk(KERN_ERR "sync_itc: failed to get attention of CPU %u!\n", master);
 		return;
 	}
@@ -395,14 +396,14 @@ smp_callin (void)
 
 	fix_b0_for_bsp();
 
-	lock_ipi_calllock();
+	ipi_call_lock_irq();
 	spin_lock(&vector_lock);
 	/* Setup the per cpu irq handling data structures */
 	__setup_vector_irq(cpuid);
 	cpu_set(cpuid, cpu_online_map);
 	per_cpu(cpu_state, cpuid) = CPU_ONLINE;
 	spin_unlock(&vector_lock);
-	unlock_ipi_calllock();
+	ipi_call_unlock_irq();
 
 	smp_setup_percpu_timer();
 
@@ -642,6 +643,7 @@ void __devinit smp_prepare_boot_cpu(void)
 	cpu_set(smp_processor_id(), cpu_online_map);
 	cpu_set(smp_processor_id(), cpu_callin_map);
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+	paravirt_post_smp_prepare_boot_cpu();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index 1eda194b9559..bcbb6d8792d3 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -160,7 +160,7 @@ sys_pipe (void)
 	int fd[2];
 	int retval;
 
-	retval = do_pipe(fd);
+	retval = do_pipe_flags(fd, 0);
 	if (retval)
 		goto out;
 	retval = fd[0];
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index aad1b7b1fff9..65c10a42c88f 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -24,6 +24,7 @@
 #include <asm/machvec.h>
 #include <asm/delay.h>
 #include <asm/hw_irq.h>
+#include <asm/paravirt.h>
 #include <asm/ptrace.h>
 #include <asm/sal.h>
 #include <asm/sections.h>
@@ -48,6 +49,15 @@ EXPORT_SYMBOL(last_cli_ip);
 
 #endif
 
+#ifdef CONFIG_PARAVIRT
+static void
+paravirt_clocksource_resume(void)
+{
+	if (pv_time_ops.clocksource_resume)
+		pv_time_ops.clocksource_resume();
+}
+#endif
+
 static struct clocksource clocksource_itc = {
 	.name           = "itc",
 	.rating         = 350,
@@ -56,6 +66,9 @@ static struct clocksource clocksource_itc = {
 	.mult           = 0, /*to be calculated*/
 	.shift          = 16,
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+#ifdef CONFIG_PARAVIRT
+	.resume		= paravirt_clocksource_resume,
+#endif
 };
 static struct clocksource *itc_clocksource;
 
@@ -157,6 +170,9 @@ timer_interrupt (int irq, void *dev_id)
 
 	profile_tick(CPU_PROFILING);
 
+	if (paravirt_do_steal_accounting(&new_itm))
+		goto skip_process_time_accounting;
+
 	while (1) {
 		update_process_times(user_mode(get_irq_regs()));
 
@@ -186,6 +202,8 @@ timer_interrupt (int irq, void *dev_id)
 		local_irq_disable();
 	}
 
+skip_process_time_accounting:
+
 	do {
 		/*
 		 * If we're too close to the next clock tick for
@@ -335,6 +353,11 @@ ia64_init_itm (void)
 		 */
 		clocksource_itc.rating = 50;
 
+	paravirt_init_missing_ticks_accounting(smp_processor_id());
+
+	/* avoid softlock up message when cpu is unplug and plugged again. */
+	touch_softlockup_watchdog();
+
 	/* Setup the CPU local timer tick */
 	ia64_cpu_local_tick();
 
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index e77995a6e3ed..8eff8c1d40a6 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -123,8 +123,7 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid)
 	status = ia64_pal_prefetch_visibility(PAL_VISIBILITY_PHYSICAL);
 	if (status == PAL_VISIBILITY_OK_REMOTE_NEEDED) {
 		atomic_set(&uc_pool->status, 0);
-		status = smp_call_function(uncached_ipi_visibility, uc_pool,
-					   0, 1);
+		status = smp_call_function(uncached_ipi_visibility, uc_pool, 1);
 		if (status || atomic_read(&uc_pool->status))
 			goto failed;
 	} else if (status != PAL_VISIBILITY_OK)
@@ -146,7 +145,7 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid)
 	if (status != PAL_STATUS_SUCCESS)
 		goto failed;
 	atomic_set(&uc_pool->status, 0);
-	status = smp_call_function(uncached_ipi_mc_drain, uc_pool, 0, 1);
+	status = smp_call_function(uncached_ipi_mc_drain, uc_pool, 1);
 	if (status || atomic_read(&uc_pool->status))
 		goto failed;
 
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 5929ab10a289..5a77206c2492 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -4,7 +4,6 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 
-#define LOAD_OFFSET	(KERNEL_START - KERNEL_TR_PAGE_SIZE)
 #include <asm-generic/vmlinux.lds.h>
 
 #define IVT_TEXT							\
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index 112791dd2542..bf22fb9e6dcf 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -43,7 +43,8 @@ $(obj)/$(offsets-file): arch/ia64/kvm/asm-offsets.s
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 EXTRA_AFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+		coalesced_mmio.o)
 
 kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 318b81100623..2672f4d278ac 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -187,6 +187,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 
 		r = 1;
 		break;
+	case KVM_CAP_COALESCED_MMIO:
+		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+		break;
 	default:
 		r = 0;
 	}
@@ -195,11 +198,11 @@ int kvm_dev_ioctl_check_extension(long ext)
 }
 
 static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-					gpa_t addr)
+					gpa_t addr, int len, int is_write)
 {
 	struct kvm_io_device *dev;
 
-	dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr);
+	dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len, is_write);
 
 	return dev;
 }
@@ -231,7 +234,7 @@ static int handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	kvm_run->exit_reason = KVM_EXIT_MMIO;
 	return 0;
 mmio:
-	mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr);
+	mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr, p->size, !p->dir);
 	if (mmio_dev) {
 		if (!p->dir)
 			kvm_iodevice_write(mmio_dev, p->addr, p->size,
@@ -395,7 +398,7 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		if (kvm->vcpus[i]->cpu != -1) {
 			call_data.vcpu = kvm->vcpus[i];
 			smp_call_function_single(kvm->vcpus[i]->cpu,
-					vcpu_global_purge, &call_data, 0, 1);
+					vcpu_global_purge, &call_data, 1);
 		} else
 			printk(KERN_WARNING"kvm: Uninit vcpu received ipi!\n");
 
@@ -1035,14 +1038,6 @@ static void kvm_free_vmm_area(void)
 	}
 }
 
-/*
- * Make sure that a cpu that is being hot-unplugged does not have any vcpus
- * cached on it. Leave it as blank for IA64.
- */
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 static void vti_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 }
@@ -1460,6 +1455,9 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
 
 long kvm_arch_dev_ioctl(struct file *filp,
 		unsigned int ioctl, unsigned long arg)
@@ -1693,7 +1691,7 @@ void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 		wake_up_interruptible(&vcpu->wq);
 
 	if (vcpu->guest_mode)
-		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0, 0);
+		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
 }
 
 int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
diff --git a/arch/ia64/kvm/kvm_fw.c b/arch/ia64/kvm/kvm_fw.c
index 091f936c4485..0c69d9ec92d4 100644
--- a/arch/ia64/kvm/kvm_fw.c
+++ b/arch/ia64/kvm/kvm_fw.c
@@ -130,7 +130,7 @@ static struct ia64_pal_retval pal_cache_flush(struct kvm_vcpu *vcpu)
 	args.cache_type = gr29;
 	args.operation = gr30;
 	smp_call_function(remote_pal_cache_flush,
-				(void *)&args, 1, 1);
+				(void *)&args, 1);
 	if (args.status != 0)
 		printk(KERN_ERR"pal_cache_flush error!,"
 				"status:0x%lx\n", args.status);
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 544dc420c65e..d83125e1ed27 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -36,7 +36,6 @@ struct early_node_data {
 	struct ia64_node_data *node_data;
 	unsigned long pernode_addr;
 	unsigned long pernode_size;
-	struct bootmem_data bootmem_data;
 	unsigned long num_physpages;
 #ifdef CONFIG_ZONE_DMA
 	unsigned long num_dma_physpages;
@@ -75,17 +74,17 @@ pg_data_t *pgdat_list[MAX_NUMNODES];
 static int __init build_node_maps(unsigned long start, unsigned long len,
 				  int node)
 {
-	unsigned long cstart, epfn, end = start + len;
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	unsigned long spfn, epfn, end = start + len;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
-	cstart = GRANULEROUNDDOWN(start);
+	spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
 
 	if (!bdp->node_low_pfn) {
-		bdp->node_boot_start = cstart;
+		bdp->node_min_pfn = spfn;
 		bdp->node_low_pfn = epfn;
 	} else {
-		bdp->node_boot_start = min(cstart, bdp->node_boot_start);
+		bdp->node_min_pfn = min(spfn, bdp->node_min_pfn);
 		bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
 	}
 
@@ -167,7 +166,7 @@ static void __init fill_pernode(int node, unsigned long pernode,
 {
 	void *cpu_data;
 	int cpus = early_nr_cpus_node(node);
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	mem_data[node].pernode_addr = pernode;
 	mem_data[node].pernode_size = pernodesize;
@@ -222,20 +221,21 @@ static void __init fill_pernode(int node, unsigned long pernode,
 static int __init find_pernode_space(unsigned long start, unsigned long len,
 				     int node)
 {
-	unsigned long epfn;
+	unsigned long spfn, epfn;
 	unsigned long pernodesize = 0, pernode, pages, mapsize;
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
+	spfn = start >> PAGE_SHIFT;
 	epfn = (start + len) >> PAGE_SHIFT;
 
-	pages = bdp->node_low_pfn - (bdp->node_boot_start >> PAGE_SHIFT);
+	pages = bdp->node_low_pfn - bdp->node_min_pfn;
 	mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 
 	/*
 	 * Make sure this memory falls within this node's usable memory
 	 * since we may have thrown some away in build_maps().
 	 */
-	if (start < bdp->node_boot_start || epfn > bdp->node_low_pfn)
+	if (spfn < bdp->node_min_pfn || epfn > bdp->node_low_pfn)
 		return 0;
 
 	/* Don't setup this node's local space twice... */
@@ -297,7 +297,7 @@ static void __init reserve_pernode_space(void)
 		bdp = pdp->bdata;
 
 		/* First the bootmem_map itself */
-		pages = bdp->node_low_pfn - (bdp->node_boot_start>>PAGE_SHIFT);
+		pages = bdp->node_low_pfn - bdp->node_min_pfn;
 		size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 		base = __pa(bdp->node_bootmem_map);
 		reserve_bootmem_node(pdp, base, size, BOOTMEM_DEFAULT);
@@ -440,7 +440,7 @@ void __init find_memory(void)
 	efi_memmap_walk(find_max_min_low_pfn, NULL);
 
 	for_each_online_node(node)
-		if (mem_data[node].bootmem_data.node_low_pfn) {
+		if (bootmem_node_data[node].node_low_pfn) {
 			node_clear(node, memory_less_mask);
 			mem_data[node].min_pfn = ~0UL;
 		}
@@ -460,14 +460,14 @@ void __init find_memory(void)
 		else if (node_isset(node, memory_less_mask))
 			continue;
 
-		bdp = &mem_data[node].bootmem_data;
+		bdp = &bootmem_node_data[node];
 		pernode = mem_data[node].pernode_addr;
 		pernodesize = mem_data[node].pernode_size;
 		map = pernode + pernodesize;
 
 		init_bootmem_node(pgdat_list[node],
 				  map>>PAGE_SHIFT,
-				  bdp->node_boot_start>>PAGE_SHIFT,
+				  bdp->node_min_pfn,
 				  bdp->node_low_pfn);
 	}
 
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index d3ce8f3bcaa6..c45fc7f5a979 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -24,7 +24,7 @@
 unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
 
 pte_t *
-huge_pte_alloc (struct mm_struct *mm, unsigned long addr)
+huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
 	unsigned long taddr = htlbpage_to_page(addr);
 	pgd_t *pgd;
@@ -75,7 +75,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
  * Don't actually need to do any preparation, but need to make sure
  * the address is in the right region.
  */
-int prepare_hugepage_range(unsigned long addr, unsigned long len)
+int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
@@ -106,13 +107,19 @@ int pmd_huge(pmd_t pmd)
 {
 	return 0;
 }
+
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write)
 {
 	return NULL;
 }
 
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			unsigned long addr, unsigned long end,
 			unsigned long floor, unsigned long ceiling)
 {
@@ -149,7 +156,7 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, u
 
 	/* Handle MAP_FIXED */
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 53351c3cd7b1..96c31b4180c3 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 #include <linux/spinlock.h>
 #include <linux/init.h>
+#include <linux/rculist.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/intr.h>
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 8cc0c4753d89..636588e7e068 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -629,7 +629,7 @@ static int sn_hwperf_op_cpu(struct sn_hwperf_op_info *op_info)
 		if (use_ipi) {
 			/* use an interprocessor interrupt to call SAL */
 			smp_call_function_single(cpu, sn_hwperf_call_sal,
-				op_info, 1, 1);
+				op_info, 1);
 		}
 		else {
 			/* migrate the task before calling SAL */ 
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 52175af299a0..53ebb6484495 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -350,7 +350,7 @@ void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 }
 EXPORT_SYMBOL(sn_dma_sync_sg_for_device);
 
-int sn_dma_mapping_error(dma_addr_t dma_addr)
+int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index de153de2ea9f..a5f864c445b2 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -296,6 +296,7 @@ config PREEMPT
 
 config SMP
 	bool "Symmetric multi-processing support"
+	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c
index 600d40e33495..d394292498c0 100644
--- a/arch/m32r/boot/compressed/misc.c
+++ b/arch/m32r/boot/compressed/misc.c
@@ -70,8 +70,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static unsigned char *input_data;
 static int input_len;
@@ -82,9 +80,6 @@ static unsigned long output_ptr = 0;
 
 #include "m32r_sio.c"
 
-static void *malloc(int size);
-static void free(void *where);
-
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
@@ -92,38 +87,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void* memset(void* s, int c, size_t n)
 {
 	int i;
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index e6709fe950ba..16bcb189a383 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -43,9 +43,6 @@ EXPORT_SYMBOL(dcache_dummy);
 #endif
 EXPORT_SYMBOL(cpu_data);
 
-/* Global SMP stuff */
-EXPORT_SYMBOL(smp_call_function);
-
 /* TLB flushing */
 EXPORT_SYMBOL(smp_flush_tlb_page);
 #endif
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index c837bc13b015..7577f971ea4e 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -35,22 +35,6 @@
 /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
 
 /*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-} __attribute__ ((__aligned__(SMP_CACHE_BYTES)));
-
-static struct call_data_struct *call_data;
-
-/*
  * For flush_cache_all()
  */
 static DEFINE_SPINLOCK(flushcache_lock);
@@ -96,9 +80,6 @@ void smp_invalidate_interrupt(void);
 void smp_send_stop(void);
 static void stop_this_cpu(void *);
 
-int smp_call_function(void (*) (void *), void *, int, int);
-void smp_call_function_interrupt(void);
-
 void smp_send_timer(void);
 void smp_ipi_timer_interrupt(struct pt_regs *);
 void smp_local_timer_interrupt(void);
@@ -231,7 +212,7 @@ void smp_flush_tlb_all(void)
 	local_irq_save(flags);
 	__flush_tlb_all();
 	local_irq_restore(flags);
-	smp_call_function(flush_tlb_all_ipi, NULL, 1, 1);
+	smp_call_function(flush_tlb_all_ipi, NULL, 1);
 	preempt_enable();
 }
 
@@ -524,7 +505,7 @@ void smp_invalidate_interrupt(void)
  *==========================================================================*/
 void smp_send_stop(void)
 {
-	smp_call_function(stop_this_cpu, NULL, 1, 0);
+	smp_call_function(stop_this_cpu, NULL, 0);
 }
 
 /*==========================================================================*
@@ -565,86 +546,14 @@ static void stop_this_cpu(void *dummy)
 	for ( ; ; );
 }
 
-/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
-/* Call function Routines                                                    */
-/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
-
-/*==========================================================================*
- * Name:         smp_call_function
- *
- * Description:  This routine sends a 'CALL_FUNCTION_IPI' to all other CPUs
- *               in the system.
- *
- * Born on Date: 2002.02.05
- *
- * Arguments:    *func - The function to run. This must be fast and
- *                       non-blocking.
- *               *info - An arbitrary pointer to pass to the function.
- *               nonatomic - currently unused.
- *               wait - If true, wait (atomically) until function has
- *                      completed on other CPUs.
- *
- * Returns:      0 on success, else a negative status code. Does not return
- *               until remote CPUs are nearly ready to execute <<func>> or
- *               are or have executed.
- *
- * Cautions:     You must not call this function with disabled interrupts or
- *               from a hardware interrupt handler, you may call it from a
- *               bottom half handler.
- *
- * Modification log:
- * Date       Who Description
- * ---------- --- --------------------------------------------------------
- *
- *==========================================================================*/
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-	int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct call_data_struct data;
-	int cpus;
-
-#ifdef DEBUG_SMP
-	unsigned long flags;
-	__save_flags(flags);
-	if (!(flags & 0x0040))	/* Interrupt Disable NONONO */
-		BUG();
-#endif /* DEBUG_SMP */
-
-	/* Holding any lock stops cpus from going down. */
-	spin_lock(&call_lock);
-	cpus = num_online_cpus() - 1;
-
-	if (!cpus) {
-		spin_unlock(&call_lock);
-		return 0;
-	}
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb();
-
-	/* Send a message to all other CPUs and wait for them to respond */
-	send_IPI_allbutself(CALL_FUNCTION_IPI, 0);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			barrier();
-	spin_unlock(&call_lock);
+	send_IPI_mask(mask, CALL_FUNCTION_IPI, 0);
+}
 
-	return 0;
+void arch_send_call_function_single_ipi(int cpu)
+{
+	send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNC_SINGLE_IPI, 0);
 }
 
 /*==========================================================================*
@@ -666,27 +575,16 @@ int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
  *==========================================================================*/
 void smp_call_function_interrupt(void)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
 	irq_enter();
-	(*func)(info);
+	generic_smp_call_function_interrupt();
 	irq_exit();
+}
 
-	if (wait) {
-		mb();
-		atomic_inc(&call_data->finished);
-	}
+void smp_call_function_single_interrupt(void)
+{
+	irq_enter();
+	generic_smp_call_function_single_interrupt();
+	irq_exit();
 }
 
 /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 89ba4a0b5d51..46159a4e644b 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -40,6 +40,7 @@ extern void smp_invalidate_interrupt(void);
 extern void smp_call_function_interrupt(void);
 extern void smp_ipi_timer_interrupt(void);
 extern void smp_flush_cache_all_interrupt(void);
+extern void smp_call_function_single_interrupt(void);
 
 /*
  * for Boot AP function
@@ -103,7 +104,7 @@ void	set_eit_vector_entries(void)
 	eit_vector[186] = (unsigned long)smp_call_function_interrupt;
 	eit_vector[187] = (unsigned long)smp_ipi_timer_interrupt;
 	eit_vector[188] = (unsigned long)smp_flush_cache_all_interrupt;
-	eit_vector[189] = 0;
+	eit_vector[189] = (unsigned long)smp_call_function_single_interrupt;
 	eit_vector[190] = 0;
 	eit_vector[191] = 0;
 #endif
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index 07c1af7dc0e2..cbc3c4c54566 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -20,7 +20,6 @@ extern char _end[];
 
 struct pglist_data *node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
 
 pg_data_t m32r_node_data[MAX_NUMNODES];
 
@@ -81,7 +80,7 @@ unsigned long __init setup_memory(void)
 	for_each_online_node(nid) {
 		mp = &mem_prof[nid];
 		NODE_DATA(nid)=(pg_data_t *)&m32r_node_data[nid];
-		NODE_DATA(nid)->bdata = &node_bdata[nid];
+		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 		min_pfn = mp->start_pfn;
 		max_pfn = mp->start_pfn + mp->pages;
 		bootmap_size = init_bootmem_node(NODE_DATA(nid), mp->free_pfn,
@@ -124,8 +123,7 @@ unsigned long __init setup_memory(void)
 	return max_low_pfn;
 }
 
-#define START_PFN(nid)	\
-	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)		(NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
 
 unsigned long __init zone_sizes_init(void)
@@ -148,8 +146,7 @@ unsigned long __init zone_sizes_init(void)
 		zholes_size[ZONE_DMA] = mp->holes;
 		holes += zholes_size[ZONE_DMA];
 
-		free_area_init_node(nid, NODE_DATA(nid), zones_size,
-			start_pfn, zholes_size);
+		free_area_init_node(nid, zones_size, start_pfn, zholes_size);
 	}
 
 	/*
@@ -163,4 +160,3 @@ unsigned long __init zone_sizes_init(void)
 
 	return holes;
 }
-
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index bbd97c85bc5d..24d429f9358a 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -36,42 +36,6 @@ pgd_t swapper_pg_dir[1024];
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n",highmem);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 /*
  * Cache of MMU context last used.
  */
@@ -93,8 +57,7 @@ void free_initrd_mem(unsigned long, unsigned long);
 #endif
 
 /* It'd be good if these lines were in the standard header file. */
-#define START_PFN(nid)	\
-	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)		(NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
 
 #ifndef CONFIG_DISCONTIGMEM
@@ -123,7 +86,7 @@ unsigned long __init zone_sizes_init(void)
 	start_pfn = __MEMORY_START >> PAGE_SHIFT;
 #endif /* CONFIG_MMU */
 
-	free_area_init_node(0, NODE_DATA(0), zones_size, start_pfn, 0);
+	free_area_init_node(0, zones_size, start_pfn, 0);
 
 	return 0;
 }
@@ -252,4 +215,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 	printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
 }
 #endif
-
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 55ea52fe6aca..8c5e1de68fcb 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -490,28 +490,6 @@ config ATARI_MFPSER
 	  Note for Falcon users: You also have an MFP port, it's just not
 	  wired to the outside... But you could use the port under Linux.
 
-config ATARI_SCC
-	tristate "Atari SCC serial support"
-	depends on ATARI
-	---help---
-	  If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
-	  LAN) and like to use them under Linux, say Y. All built-in SCC's are
-	  supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
-	  two connectors for channel A (Serial2 and LAN), they are visible as
-	  two separate devices.
-
-	  To compile this driver as a module, choose M here.
-
-config ATARI_SCC_DMA
-	bool "Atari SCC serial DMA support"
-	depends on ATARI_SCC
-	help
-	  This enables DMA support for receiving data on channel A of the SCC.
-	  If you have a TT you may say Y here and read
-	  drivers/char/atari_SCC.README. All other users should say N here,
-	  because only the TT has SCC-DMA, even if your machine keeps claiming
-	  so at boot time.
-
 config ATARI_MIDI
 	tristate "Atari MIDI serial support"
 	depends on ATARI
@@ -578,18 +556,6 @@ config MAC_HID
 	depends on INPUT_ADBHID
 	default y
 
-config ADB_KEYBOARD
-	bool "Support for ADB keyboard (old driver)"
-	depends on MAC && !INPUT_ADBHID
-	help
-	  This option allows you to use an ADB keyboard attached to your
-	  machine. Note that this disables any other (ie. PS/2) keyboard
-	  support, even if your machine is physically capable of using both at
-	  the same time.
-
-	  If you use an ADB keyboard (4 pin connector), say Y here.
-	  If you use a PS/2 keyboard (6 pin connector), say N here.
-
 config HPDCA
 	tristate "HP DCA serial support"
 	depends on DIO && SERIAL_8250
@@ -640,7 +606,7 @@ config DN_SERIAL
 
 config SERIAL_CONSOLE
 	bool "Support for serial port console"
-	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index b15173f28a23..8133dbc44964 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -13,7 +13,7 @@
 # Copyright (C) 1994 by Hamish Macdonald
 #
 
-KBUILD_DEFCONFIG := amiga_defconfig
+KBUILD_DEFCONFIG := multi_defconfig
 
 # override top level makefile
 AS += -m68020
diff --git a/arch/m68k/amiga/chipram.c b/arch/m68k/amiga/chipram.c
index cbe36538af47..61df1d33c050 100644
--- a/arch/m68k/amiga/chipram.c
+++ b/arch/m68k/amiga/chipram.c
@@ -9,6 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 50f5daab46b7..df679d96b1cb 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -36,14 +36,11 @@
 #include <asm/machdep.h>
 #include <asm/io.h>
 
-unsigned long amiga_model;
-EXPORT_SYMBOL(amiga_model);
+static unsigned long amiga_model;
 
 unsigned long amiga_eclock;
 EXPORT_SYMBOL(amiga_eclock);
 
-unsigned long amiga_masterclock;
-
 unsigned long amiga_colorclock;
 EXPORT_SYMBOL(amiga_colorclock);
 
@@ -51,7 +48,9 @@ unsigned long amiga_chipset;
 EXPORT_SYMBOL(amiga_chipset);
 
 unsigned char amiga_vblank;
-unsigned char amiga_psfreq;
+EXPORT_SYMBOL(amiga_vblank);
+
+static unsigned char amiga_psfreq;
 
 struct amiga_hw_present amiga_hw_present;
 EXPORT_SYMBOL(amiga_hw_present);
@@ -92,8 +91,6 @@ static char *amiga_models[] __initdata = {
 static char amiga_model_name[13] = "Amiga ";
 
 static void amiga_sched_init(irq_handler_t handler);
-/* amiga specific irq functions */
-extern void amiga_init_IRQ(void);
 static void amiga_get_model(char *model);
 static int amiga_get_hardware_list(char *buffer);
 /* amiga specific timer functions */
@@ -107,8 +104,6 @@ static void amiga_reset(void);
 extern void amiga_init_sound(void);
 static void amiga_mem_console_write(struct console *co, const char *b,
 				    unsigned int count);
-void amiga_serial_console_write(struct console *co, const char *s,
-				unsigned int count);
 #ifdef CONFIG_HEARTBEAT
 static void amiga_heartbeat(int on);
 #endif
@@ -418,8 +413,7 @@ void __init config_amiga(void)
 	mach_heartbeat = amiga_heartbeat;
 #endif
 
-	/* Fill in the clock values (based on the 700 kHz E-Clock) */
-	amiga_masterclock = 40*amiga_eclock;	/* 28 MHz */
+	/* Fill in the clock value (based on the 700 kHz E-Clock) */
 	amiga_colorclock = 5*amiga_eclock;	/* 3.5 MHz */
 
 	/* clear all DMA bits */
@@ -817,8 +811,8 @@ static void amiga_serial_putc(char c)
 		;
 }
 
-void amiga_serial_console_write(struct console *co, const char *s,
-				unsigned int count)
+static void amiga_serial_console_write(struct console *co, const char *s,
+				       unsigned int count)
 {
 	while (count--) {
 		if (*s == '\n')
@@ -827,7 +821,7 @@ void amiga_serial_console_write(struct console *co, const char *s,
 	}
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 void amiga_serial_puts(const char *s)
 {
 	amiga_serial_console_write(NULL, s, strlen(s));
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 043ddbc61c7b..702b15ccfab7 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -20,14 +20,6 @@
 #include <asm/atarihw.h>
 #include <asm/atariints.h>
 
-/* Flag that Modem1 port is already initialized and used */
-int atari_MFP_init_done;
-EXPORT_SYMBOL(atari_MFP_init_done);
-
-/* Flag that Modem1 port is already initialized and used */
-int atari_SCC_init_done;
-EXPORT_SYMBOL(atari_SCC_init_done);
-
 /* Can be set somewhere, if a SCC master reset has already be done and should
  * not be repeated; used by kgdb */
 int atari_SCC_reset_done;
@@ -47,8 +39,8 @@ static inline void ata_mfp_out(char c)
 	mfp.usart_dta = c;
 }
 
-void atari_mfp_console_write(struct console *co, const char *str,
-			     unsigned int count)
+static void atari_mfp_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -66,8 +58,8 @@ static inline void ata_scc_out(char c)
 	scc.cha_b_data = c;
 }
 
-void atari_scc_console_write(struct console *co, const char *str,
-			     unsigned int count)
+static void atari_scc_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -83,8 +75,8 @@ static inline void ata_midi_out(char c)
 	acia.mid_data = c;
 }
 
-void atari_midi_console_write(struct console *co, const char *str,
-			      unsigned int count)
+static void atari_midi_console_write(struct console *co, const char *str,
+				     unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -136,7 +128,7 @@ static void atari_par_console_write(struct console *co, const char *str,
 	}
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 int atari_mfp_console_wait_key(struct console *co)
 {
 	while (!(mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
@@ -166,11 +158,7 @@ int atari_midi_console_wait_key(struct console *co)
  * SCC serial ports. They're used by the debugging interface, kgdb, and the
  * serial console code.
  */
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_mfp_port(int cflag)
-#else
-void atari_init_mfp_port(int cflag)
-#endif
 {
 	/*
 	 * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
@@ -193,8 +181,6 @@ void atari_init_mfp_port(int cflag)
 	mfp.tim_dt_d = baud_table[baud];
 	mfp.tim_ct_cd |= 0x01;		/* start timer D, 1:4 */
 	mfp.trn_stat |= 0x01;		/* enable TX */
-
-	atari_MFP_init_done = 1;
 }
 
 #define SCC_WRITE(reg, val)				\
@@ -214,11 +200,7 @@ void atari_init_mfp_port(int cflag)
 			MFPDELAY();			\
 	} while (0)
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_scc_port(int cflag)
-#else
-void atari_init_scc_port(int cflag)
-#endif
 {
 	extern int atari_SCC_reset_done;
 	static int clksrc_table[9] =
@@ -277,14 +259,9 @@ void atari_init_scc_port(int cflag)
 	SCC_WRITE(5, reg5 | 8);
 
 	atari_SCC_reset_done = 1;
-	atari_SCC_init_done = 1;
 }
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_midi_port(int cflag)
-#else
-void atari_init_midi_port(int cflag)
-#endif
 {
 	int baud = cflag & CBAUD;
 	int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c
index a812d03879f8..e8ac3f7d72df 100644
--- a/arch/m68k/bvme6000/rtc.c
+++ b/arch/m68k/bvme6000/rtc.c
@@ -10,6 +10,7 @@
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/capability.h>
 #include <linux/fcntl.h>
@@ -140,10 +141,14 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 static int rtc_open(struct inode *inode, struct file *file)
 {
-	if(rtc_status)
+	lock_kernel();
+	if(rtc_status) {
+		unlock_kernel();
 		return -EBUSY;
+	}
 
 	rtc_status = 1;
+	unlock_kernel();
 	return 0;
 }
 
diff --git a/arch/m68k/fpsp040/Makefile b/arch/m68k/fpsp040/Makefile
index 0214d2f6f8b0..9506d883ace5 100644
--- a/arch/m68k/fpsp040/Makefile
+++ b/arch/m68k/fpsp040/Makefile
@@ -10,7 +10,6 @@ obj-y    := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
 	    x_bsun.o x_fline.o x_operr.o x_ovfl.o x_snan.o x_store.o \
 	    x_unfl.o x_unimp.o x_unsupp.o bugfix.o skeleton.o
 
-EXTRA_AFLAGS := -traditional
 EXTRA_LDFLAGS := -x
 
 $(OS_OBJS): fpsp.h
diff --git a/arch/m68k/ifpsp060/Makefile b/arch/m68k/ifpsp060/Makefile
index 2fe8472cb5e3..43b435049452 100644
--- a/arch/m68k/ifpsp060/Makefile
+++ b/arch/m68k/ifpsp060/Makefile
@@ -6,5 +6,4 @@
 
 obj-y := fskeleton.o iskeleton.o os.o
 
-EXTRA_AFLAGS := -traditional
 EXTRA_LDFLAGS := -x
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 7a62a718143b..3a7f62225504 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -16,5 +16,3 @@ devres-y = ../../../kernel/irq/devres.o
 
 obj-$(CONFIG_PCI)	+= bios32.o
 obj-y$(CONFIG_MMU_SUN3) += dma.o	# no, it's not a typo
-
-EXTRA_AFLAGS := -traditional
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index a9fb83a8c180..ea1e44da19b9 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -26,6 +26,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/setup.h>
+#include <asm/fpu.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
@@ -40,6 +41,11 @@
 #include <asm/dvma.h>
 #endif
 
+#if !FPSTATESIZE || !NR_IRQS
+#warning No CPU/platform type selected, your kernel will not work!
+#warning Are you building an allnoconfig kernel?
+#endif
+
 unsigned long m68k_machtype;
 EXPORT_SYMBOL(m68k_machtype);
 unsigned long m68k_cputype;
@@ -116,6 +122,7 @@ extern int bvme6000_parse_bootinfo(const struct bi_record *);
 extern int mvme16x_parse_bootinfo(const struct bi_record *);
 extern int mvme147_parse_bootinfo(const struct bi_record *);
 extern int hp300_parse_bootinfo(const struct bi_record *);
+extern int apollo_parse_bootinfo(const struct bi_record *);
 
 extern void config_amiga(void);
 extern void config_atari(void);
@@ -183,6 +190,8 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
 				unknown = mvme147_parse_bootinfo(record);
 			else if (MACH_IS_HP300)
 				unknown = hp300_parse_bootinfo(record);
+			else if (MACH_IS_APOLLO)
+				unknown = apollo_parse_bootinfo(record);
 			else
 				unknown = 1;
 		}
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 7537cc5e6159..99b0784c0552 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -1,6 +1,7 @@
 /* ld script to make m68k Linux kernel */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -41,7 +42,7 @@ SECTIONS
   _edata = .;			/* End of data section */
 
   /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
   .init.text : {
 	_sinittext = .;
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index cdc313e7c299..8a4919e4d36a 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -1,6 +1,7 @@
 /* ld script to make m68k Linux kernel */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -34,7 +35,7 @@ SECTIONS
   _edata = .;
 
   /* will be freed after init */
-  . = ALIGN(8192);	/* Init code and data */
+  . = ALIGN(PAGE_SIZE);	/* Init code and data */
 __init_begin = .;
 	.init.text : {
 		_sinittext = .;
@@ -61,12 +62,12 @@ __init_begin = .;
 	}
 	SECURITY_INIT
 #ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(8192);
+	. = ALIGN(PAGE_SIZE);
 	__initramfs_start = .;
 	.init.ramfs : { *(.init.ramfs) }
 	__initramfs_end = .;
 #endif
-	. = ALIGN(8192);
+	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	.data.init.task : { *(.data.init_task) }
 
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index a18af095cd7c..af9abf8d9d98 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -2,7 +2,5 @@
 # Makefile for m68k-specific library files..
 #
 
-EXTRA_AFLAGS := -traditional
-
 lib-y	:= ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
 	   checksum.o string.o uaccess.o
diff --git a/arch/m68k/mac/Makefile b/arch/m68k/mac/Makefile
index 1d265ba365ad..daebd80bdef0 100644
--- a/arch/m68k/mac/Makefile
+++ b/arch/m68k/mac/Makefile
@@ -2,5 +2,5 @@
 # Makefile for Linux arch/m68k/mac source directory
 #
 
-obj-y		:= config.o bootparse.o macints.o iop.o via.o oss.o psc.o \
+obj-y		:= config.o macints.o iop.o via.o oss.o psc.o \
 			baboon.o macboing.o debug.o misc.o
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index 673a1085984d..dae9c982aa89 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -23,9 +23,7 @@
 /* #define DEBUG_IRQS */
 
 int baboon_present;
-volatile struct baboon *baboon;
-
-irqreturn_t baboon_irq(int, void *);
+static volatile struct baboon *baboon;
 
 #if 0
 extern int macide_ack_intr(struct ata_channel *);
@@ -50,20 +48,10 @@ void __init baboon_init(void)
 }
 
 /*
- * Register the Baboon interrupt dispatcher on nubus slot $C.
- */
-
-void __init baboon_register_interrupts(void)
-{
-	request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
-		    "baboon", (void *) baboon);
-}
-
-/*
  * Baboon interrupt handler. This works a lot like a VIA.
  */
 
-irqreturn_t baboon_irq(int irq, void *dev_id)
+static irqreturn_t baboon_irq(int irq, void *dev_id)
 {
 	int irq_bit, irq_num;
 	unsigned char events;
@@ -95,6 +83,16 @@ irqreturn_t baboon_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Register the Baboon interrupt dispatcher on nubus slot $C.
+ */
+
+void __init baboon_register_interrupts(void)
+{
+	request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
+		    "baboon", (void *) baboon);
+}
+
 void baboon_irq_enable(int irq) {
 #ifdef DEBUG_IRQUSE
 	printk("baboon_irq_enable(%d)\n", irq);
diff --git a/arch/m68k/mac/bootparse.c b/arch/m68k/mac/bootparse.c
deleted file mode 100644
index 36d223609823..000000000000
--- a/arch/m68k/mac/bootparse.c
+++ /dev/null
@@ -1,122 +0,0 @@
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-#include <asm/macintosh.h>
-
-/*
- *	Booter vars
- */
-
-int boothowto;
-int _boothowto;
-
-/*
- *	Called early to parse the environment (passed to us from the booter)
- *	into a bootinfo struct. Will die as soon as we have our own booter
- */
-
-#define atol(x)	simple_strtoul(x,NULL,0)
-
-void parse_booter(char *env)
-{
-	char *name;
-	char *value;
-#if 0
-	while(0 && *env)
-#else
-	while(*env)
-#endif
-	{
-		name=env;
-		value=name;
-		while(*value!='='&&*value)
-			value++;
-		if(*value=='=')
-			*value++=0;
-		env=value;
-		while(*env)
-			env++;
-		env++;
-#if 0
-		if(strcmp(name,"VIDEO_ADDR")==0)
-			mac_mch.videoaddr=atol(value);
-		if(strcmp(name,"ROW_BYTES")==0)
-			mac_mch.videorow=atol(value);
-		if(strcmp(name,"SCREEN_DEPTH")==0)
-			mac_mch.videodepth=atol(value);
-		if(strcmp(name,"DIMENSIONS")==0)
-			mac_mch.dimensions=atol(value);
-#endif
-		if(strcmp(name,"BOOTTIME")==0)
-			mac_bi_data.boottime=atol(value);
-		if(strcmp(name,"GMTBIAS")==0)
-			mac_bi_data.gmtbias=atol(value);
-		if(strcmp(name,"BOOTERVER")==0)
-			mac_bi_data.bootver=atol(value);
-		if(strcmp(name,"MACOS_VIDEO")==0)
-			mac_bi_data.videological=atol(value);
-		if(strcmp(name,"MACOS_SCC")==0)
-			mac_bi_data.sccbase=atol(value);
-		if(strcmp(name,"MACHINEID")==0)
-			mac_bi_data.id=atol(value);
-		if(strcmp(name,"MEMSIZE")==0)
-			mac_bi_data.memsize=atol(value);
-		if(strcmp(name,"SERIAL_MODEM_FLAGS")==0)
-			mac_bi_data.serialmf=atol(value);
-		if(strcmp(name,"SERIAL_MODEM_HSKICLK")==0)
-			mac_bi_data.serialhsk=atol(value);
-		if(strcmp(name,"SERIAL_MODEM_GPICLK")==0)
-			mac_bi_data.serialgpi=atol(value);
-		if(strcmp(name,"SERIAL_PRINT_FLAGS")==0)
-			mac_bi_data.printmf=atol(value);
-		if(strcmp(name,"SERIAL_PRINT_HSKICLK")==0)
-			mac_bi_data.printhsk=atol(value);
-		if(strcmp(name,"SERIAL_PRINT_GPICLK")==0)
-			mac_bi_data.printgpi=atol(value);
-		if(strcmp(name,"PROCESSOR")==0)
-			mac_bi_data.cpuid=atol(value);
-		if(strcmp(name,"ROMBASE")==0)
-			mac_bi_data.rombase=atol(value);
-		if(strcmp(name,"TIMEDBRA")==0)
-			mac_bi_data.timedbra=atol(value);
-		if(strcmp(name,"ADBDELAY")==0)
-			mac_bi_data.adbdelay=atol(value);
-	}
-#if 0	/* XXX: TODO with m68k_mach_* */
-	/* Fill in the base stuff */
-	boot_info.machtype=MACH_MAC;
-	/* Read this from the macinfo we got ! */
-/*	boot_info.cputype=CPU_68020|FPUB_68881;*/
-/*	boot_info.memory[0].addr=0;*/
-/*	boot_info.memory[0].size=((mac_bi_data.id>>7)&31)<<20;*/
-	boot_info.num_memory=1;		/* On a MacII */
-	boot_info.ramdisk_size=0;	/* For now */
-	*boot_info.command_line=0;
-#endif
- }
-
-
-void print_booter(char *env)
-{
-	char *name;
-	char *value;
-	while(*env)
-	{
-		name=env;
-		value=name;
-		while(*value!='='&&*value)
-			value++;
-		if(*value=='=')
-			*value++=0;
-		env=value;
-		while(*env)
-			env++;
-		env++;
-		printk("%s=%s\n", name,value);
-	}
- }
-
-
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index ad3e3bacae39..c45e18449f32 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -46,7 +46,6 @@
 /* Mac bootinfo struct */
 
 struct mac_booter_data mac_bi_data;
-int mac_bisize = sizeof mac_bi_data;
 
 /* New m68k bootinfo stuff and videobase */
 
@@ -55,10 +54,8 @@ extern struct mem_info m68k_memory[NUM_MEMINFO];
 
 extern struct mem_info m68k_ramdisk;
 
-void *mac_env;					/* Loaded by the boot asm */
-
 /* The phys. video addr. - might be bogus on some machines */
-unsigned long mac_orig_videoaddr;
+static unsigned long mac_orig_videoaddr;
 
 /* Mac specific timer functions */
 extern unsigned long mac_gettimeoffset(void);
@@ -79,6 +76,8 @@ extern void mac_mksound(unsigned int, unsigned int);
 extern void nubus_sweep_video(void);
 
 static void mac_get_model(char *str);
+static void mac_identify(void);
+static void mac_report_hardware(void);
 
 static void __init mac_sched_init(irq_handler_t vector)
 {
@@ -765,7 +764,7 @@ static struct mac_model mac_data_table[] = {
 	}
 };
 
-void __init mac_identify(void)
+static void __init mac_identify(void)
 {
 	struct mac_model *m;
 
@@ -821,7 +820,7 @@ void __init mac_identify(void)
 	baboon_init();
 }
 
-void __init mac_report_hardware(void)
+static void __init mac_report_hardware(void)
 {
 	printk(KERN_INFO "Apple Macintosh %s\n", macintosh_config->name);
 }
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
index e8a57138b4a6..2165740786a5 100644
--- a/arch/m68k/mac/debug.c
+++ b/arch/m68k/mac/debug.c
@@ -51,6 +51,8 @@ extern void mac_serial_print(const char *);
 static int peng, line;
 #endif
 
+#if 0
+
 void mac_debugging_short(int pos, short num)
 {
 #ifdef DEBUG_SCREEN
@@ -125,6 +127,8 @@ void mac_debugging_long(int pos, long addr)
 #endif
 }
 
+#endif  /*  0  */
+
 #ifdef DEBUG_SERIAL
 /*
  * TODO: serial debug code
@@ -142,12 +146,6 @@ struct mac_SCC {
 
 # define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
 
-/* Flag that serial port is already initialized and used */
-int mac_SCC_init_done;
-/* Can be set somewhere, if a SCC master reset has already be done and should
- * not be repeated; used by kgdb */
-int mac_SCC_reset_done;
-
 static int scc_port = -1;
 
 static struct console mac_console_driver = {
@@ -171,8 +169,8 @@ static struct console mac_console_driver = {
  * this driver if Mac.
  */
 
-void mac_debug_console_write(struct console *co, const char *str,
-			     unsigned int count)
+static void mac_debug_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
 	mac_serial_print(str);
 }
@@ -209,8 +207,8 @@ static inline void mac_scca_out(char c)
 	scc.cha_a_data = c;
 }
 
-void mac_sccb_console_write(struct console *co, const char *str,
-			    unsigned int count)
+static void mac_sccb_console_write(struct console *co, const char *str,
+				   unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -219,8 +217,8 @@ void mac_sccb_console_write(struct console *co, const char *str,
 	}
 }
 
-void mac_scca_console_write(struct console *co, const char *str,
-			    unsigned int count)
+static void mac_scca_console_write(struct console *co, const char *str,
+				   unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -265,14 +263,8 @@ void mac_scca_console_write(struct console *co, const char *str,
 		    barrier();				\
 	} while(0)
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init mac_init_scc_port(int cflag, int port)
-#else
-void mac_init_scc_port(int cflag, int port)
-#endif
 {
-	extern int mac_SCC_reset_done;
-
 	/*
 	 * baud rates: 1200, 1800, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k
 	 */
@@ -340,22 +332,9 @@ void mac_init_scc_port(int cflag, int port)
 		SCCA_WRITE(3, reg3 | 1);
 		SCCA_WRITE(5, reg5 | 8);
 	}
-
-	mac_SCC_reset_done = 1;
-	mac_SCC_init_done = 1;
 }
 #endif /* DEBUG_SERIAL */
 
-void mac_init_scca_port(int cflag)
-{
-	mac_init_scc_port(cflag, 0);
-}
-
-void mac_init_sccb_port(int cflag)
-{
-	mac_init_scc_port(cflag, 1);
-}
-
 static int __init mac_debug_setup(char *arg)
 {
 	if (!MACH_IS_MAC)
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index 3c943d2ec570..43d83e054b8e 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -30,8 +30,8 @@
 int oss_present;
 volatile struct mac_oss *oss;
 
-irqreturn_t oss_irq(int, void *);
-irqreturn_t oss_nubus_irq(int, void *);
+static irqreturn_t oss_irq(int, void *);
+static irqreturn_t oss_nubus_irq(int, void *);
 
 extern irqreturn_t via1_irq(int, void *);
 extern irqreturn_t mac_scc_dispatch(int, void *);
@@ -92,7 +92,7 @@ void __init oss_nubus_init(void)
  * and SCSI; everything else is routed to its own autovector IRQ.
  */
 
-irqreturn_t oss_irq(int irq, void *dev_id)
+static irqreturn_t oss_irq(int irq, void *dev_id)
 {
 	int events;
 
@@ -126,7 +126,7 @@ irqreturn_t oss_irq(int irq, void *dev_id)
  * Unlike the VIA/RBV this is on its own autovector interrupt level.
  */
 
-irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
 {
 	int events, irq_bit, i;
 
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index d66f723b17c3..f84a4dd64f94 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -36,7 +36,7 @@ irqreturn_t psc_irq(int, void *);
  * Debugging dump, used in various places to see what's going on.
  */
 
-void psc_debug_dump(void)
+static void psc_debug_dump(void)
 {
 	int	i;
 
@@ -55,7 +55,7 @@ void psc_debug_dump(void)
  * expanded to cover what I think are the other 7 channels.
  */
 
-void psc_dma_die_die_die(void)
+static void psc_dma_die_die_die(void)
 {
 	int i;
 
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index fa485df4160e..f3b27d04a31f 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -45,7 +45,7 @@ volatile long *via_memory_bogon=(long *)&via_memory_bogon;
 int rbv_present;
 int via_alt_mapping;
 EXPORT_SYMBOL(via_alt_mapping);
-__u8 rbv_clear;
+static __u8 rbv_clear;
 
 /*
  * Globals for accessing the VIA chip registers without having to
diff --git a/arch/m68k/math-emu/Makefile b/arch/m68k/math-emu/Makefile
index 539940401814..a0935bf98362 100644
--- a/arch/m68k/math-emu/Makefile
+++ b/arch/m68k/math-emu/Makefile
@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_AFLAGS := -traditional
-
 #EXTRA_AFLAGS += -DFPU_EMU_DEBUG
 #EXTRA_CFLAGS += -DFPU_EMU_DEBUG
 
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index d8fb9c5303cc..81bb08ceec18 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -32,8 +32,6 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-static bootmem_data_t __initdata bootmem_data[MAX_NUMNODES];
-
 pg_data_t pg_data_map[MAX_NUMNODES];
 EXPORT_SYMBOL(pg_data_map);
 
@@ -58,7 +56,7 @@ void __init m68k_setup_node(int node)
 		pg_data_table[i] = pg_data_map + node;
 	}
 #endif
-	pg_data_map[node].bdata = bootmem_data + node;
+	pg_data_map[node].bdata = bootmem_node_data + node;
 	node_set_online(node);
 }
 
@@ -71,36 +69,6 @@ void __init m68k_setup_node(int node)
 void *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
 
-void show_mem(void)
-{
-	pg_data_t *pgdat;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-	int cached = 0;
-	int i;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat->node_mem_map + i;
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 extern void init_pointer_table(unsigned long ptable);
 
 /* References to section boundaries */
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 30d34f285024..c5dbb9bdb322 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -285,7 +285,6 @@ void __init paging_init(void)
 	 * to a couple of allocated pages
 	 */
 	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-	memset(empty_zero_page, 0, PAGE_SIZE);
 
 	/*
 	 * Set up SFC/DFC registers
@@ -297,7 +296,7 @@ void __init paging_init(void)
 #endif
 	for (i = 0; i < m68k_num_memory; i++) {
 		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
-		free_area_init_node(i, pg_data_map + i, zones_size,
+		free_area_init_node(i, zones_size,
 				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
 	}
 }
diff --git a/arch/m68k/mm/sun3mmu.c b/arch/m68k/mm/sun3mmu.c
index 6a6513aa1ce8..1b902dbd4376 100644
--- a/arch/m68k/mm/sun3mmu.c
+++ b/arch/m68k/mm/sun3mmu.c
@@ -53,7 +53,6 @@ void __init paging_init(void)
 	wp_works_ok = 0;
 #endif
 	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-	memset(empty_zero_page, 0, PAGE_SIZE);
 
 	address = PAGE_OFFSET;
 	pg_dir = swapper_pg_dir;
@@ -95,7 +94,7 @@ void __init paging_init(void)
 
 	/* I really wish I knew why the following change made things better...  -- Sam */
 /*	free_area_init(zones_size); */
-	free_area_init_node(0, NODE_DATA(0), zones_size,
+	free_area_init_node(0, zones_size,
 			    (__pa(PAGE_OFFSET) >> PAGE_SHIFT) + 1, NULL);
 
 
diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c
index e341387787ab..432a9f13b2ed 100644
--- a/arch/m68k/mvme16x/rtc.c
+++ b/arch/m68k/mvme16x/rtc.c
@@ -10,6 +10,7 @@
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/capability.h>
 #include <linux/fcntl.h>
@@ -127,11 +128,14 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 static int rtc_open(struct inode *inode, struct file *file)
 {
+	lock_kernel();
 	if( !atomic_dec_and_test(&rtc_ready) )
 	{
 		atomic_inc( &rtc_ready );
+		unlock_kernel();
 		return -EBUSY;
 	}
+	unlock_kernel();
 
 	return 0;
 }
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 476e18eca758..be9de2f3dc48 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -41,14 +41,12 @@ static void q40_get_model(char *model);
 static int  q40_get_hardware_list(char *buffer);
 extern void q40_sched_init(irq_handler_t handler);
 
-extern unsigned long q40_gettimeoffset(void);
-extern int q40_hwclk(int, struct rtc_time *);
-extern unsigned int q40_get_ss(void);
-extern int q40_set_clock_mmss(unsigned long);
+static unsigned long q40_gettimeoffset(void);
+static int q40_hwclk(int, struct rtc_time *);
+static unsigned int q40_get_ss(void);
+static int q40_set_clock_mmss(unsigned long);
 static int q40_get_rtc_pll(struct rtc_pll_info *pll);
 static int q40_set_rtc_pll(struct rtc_pll_info *pll);
-extern void q40_reset(void);
-void q40_halt(void);
 extern void q40_waitbut(void);
 void q40_set_vectors(void);
 
@@ -127,7 +125,7 @@ static void q40_heartbeat(int on)
 }
 #endif
 
-void q40_reset(void)
+static void q40_reset(void)
 {
         halted = 1;
         printk("\n\n*******************************************\n"
@@ -137,7 +135,8 @@ void q40_reset(void)
 	while (1)
 		;
 }
-void q40_halt(void)
+
+static void q40_halt(void)
 {
         halted = 1;
         printk("\n\n*******************\n"
@@ -165,7 +164,8 @@ static unsigned int serports[] =
 {
 	0x3f8,0x2f8,0x3e8,0x2e8,0
 };
-void q40_disable_irqs(void)
+
+static void q40_disable_irqs(void)
 {
 	unsigned i, j;
 
@@ -227,7 +227,7 @@ static inline unsigned char bin2bcd(unsigned char b)
 }
 
 
-unsigned long q40_gettimeoffset(void)
+static unsigned long q40_gettimeoffset(void)
 {
 	return 5000 * (ql_ticks != 0);
 }
@@ -248,7 +248,7 @@ unsigned long q40_gettimeoffset(void)
  * };
  */
 
-int q40_hwclk(int op, struct rtc_time *t)
+static int q40_hwclk(int op, struct rtc_time *t)
 {
 	if (op) {
 		/* Write.... */
@@ -285,7 +285,7 @@ int q40_hwclk(int op, struct rtc_time *t)
 	return 0;
 }
 
-unsigned int q40_get_ss(void)
+static unsigned int q40_get_ss(void)
 {
 	return bcd2bin(Q40_RTC_SECS);
 }
@@ -295,7 +295,7 @@ unsigned int q40_get_ss(void)
  * clock is out by > 30 minutes.  Logic lifted from atari code.
  */
 
-int q40_set_clock_mmss(unsigned long nowtime)
+static int q40_set_clock_mmss(unsigned long nowtime)
 {
 	int retval = 0;
 	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
diff --git a/arch/m68k/sun3/Makefile b/arch/m68k/sun3/Makefile
index be1a8470d636..38ba0e0cedad 100644
--- a/arch/m68k/sun3/Makefile
+++ b/arch/m68k/sun3/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Linux arch/m68k/sun3 source directory
 #
 
-obj-y	:= sun3ints.o sun3dvma.o sbus.o idprom.o
+obj-y	:= sun3ints.o sun3dvma.o idprom.o
 
 obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o intersil.o
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index c0fbd278fbb1..732087d0735c 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@ extern char _text, _end;
 char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
 
 extern unsigned long sun3_gettimeoffset(void);
-extern void sun3_sched_init(irq_handler_t handler);
+static void sun3_sched_init(irq_handler_t handler);
 extern void sun3_get_model (char* model);
 extern void idprom_init (void);
 extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -114,7 +114,8 @@ static void sun3_halt (void)
 
 /* sun3 bootmem allocation */
 
-void __init sun3_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
+static void __init sun3_bootmem_alloc(unsigned long memory_start,
+				      unsigned long memory_end)
 {
 	unsigned long start_page;
 
@@ -164,7 +165,7 @@ void __init config_sun3(void)
 	sun3_bootmem_alloc(memory_start, memory_end);
 }
 
-void __init sun3_sched_init(irq_handler_t timer_routine)
+static void __init sun3_sched_init(irq_handler_t timer_routine)
 {
 	sun3_disable_interrupts();
         intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_DISABLE|INTERSIL_24H_MODE);
diff --git a/arch/m68k/sun3/dvma.c b/arch/m68k/sun3/dvma.c
index d2b3093f2405..d522eaab4551 100644
--- a/arch/m68k/sun3/dvma.c
+++ b/arch/m68k/sun3/dvma.c
@@ -19,7 +19,7 @@
 
 static unsigned long ptelist[120];
 
-inline unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
+static unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
 {
 	unsigned long pte;
 	unsigned long j;
diff --git a/arch/m68k/sun3/idprom.c b/arch/m68k/sun3/idprom.c
index dca6ab6a4ede..c86ac37d1983 100644
--- a/arch/m68k/sun3/idprom.c
+++ b/arch/m68k/sun3/idprom.c
@@ -1,4 +1,4 @@
-/* $Id: idprom.c,v 1.22 1996/11/13 05:09:25 davem Exp $
+/*
  * idprom.c: Routines to load the idprom into kernel addresses and
  *           interpret the data contained within.
  *
@@ -25,7 +25,7 @@ static struct idprom idprom_buffer;
  * of the Sparc CPU and have a meaningful IDPROM machtype value that we
  * know about.  See asm-sparc/machines.h for empirical constants.
  */
-struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
+static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 /* First, Sun3's */
     { .name = "Sun 3/160 Series",	.id_machtype = (SM_SUN3 | SM_3_160) },
     { .name = "Sun 3/50",		.id_machtype = (SM_SUN3 | SM_3_50) },
diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c
index fb0f6a20cc3c..60f9d4500d72 100644
--- a/arch/m68k/sun3/mmu_emu.c
+++ b/arch/m68k/sun3/mmu_emu.c
@@ -55,7 +55,7 @@ unsigned char pmeg_ctx[PMEGS_NUM];
 
 /* pointers to the mm structs for each task in each
    context. 0xffffffff is a marker for kernel context */
-struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
+static struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
     [0] = (struct mm_struct *)0xffffffff
 };
 
diff --git a/arch/m68k/sun3/prom/Makefile b/arch/m68k/sun3/prom/Makefile
index 6e48ae2a7175..da7eac06bca0 100644
--- a/arch/m68k/sun3/prom/Makefile
+++ b/arch/m68k/sun3/prom/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.5 1995/11/25 00:59:48 davem Exp $
 # Makefile for the Sun Boot PROM interface library under
 # Linux.
 #
diff --git a/arch/m68k/sun3/prom/console.c b/arch/m68k/sun3/prom/console.c
index 52c1427863de..2bcb6e4bfe54 100644
--- a/arch/m68k/sun3/prom/console.c
+++ b/arch/m68k/sun3/prom/console.c
@@ -1,4 +1,4 @@
-/* $Id: console.c,v 1.10 1996/12/18 06:46:54 tridge Exp $
+/*
  * console.c: Routines that deal with sending and receiving IO
  *            to/from the current console device using the PROM.
  *
@@ -104,8 +104,6 @@ prom_query_input_device()
 				return PROMDEV_ITTYB;
 		}
 		return PROMDEV_I_UNK;
-	case PROM_AP1000:
-		return PROMDEV_I_UNK;
 	};
 }
 #endif
@@ -166,8 +164,6 @@ prom_query_output_device()
 			};
 		}
 		break;
-	case PROM_AP1000:
-		return PROMDEV_I_UNK;
 	};
 	return PROMDEV_O_UNK;
 }
diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c
index 202adfcc316e..d8e6349336b4 100644
--- a/arch/m68k/sun3/prom/init.c
+++ b/arch/m68k/sun3/prom/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.9 1996/12/18 06:46:55 tridge Exp $
+/*
  * init.c:  Initialize internal variables used by the PROM
  *          library functions.
  *
@@ -31,11 +31,6 @@ extern void prom_ranges_init(void);
 
 void __init prom_init(struct linux_romvec *rp)
 {
-#ifdef CONFIG_AP1000
-	extern struct linux_romvec *ap_prom_init(void);
-	rp = ap_prom_init();
-#endif
-
 	romvec = rp;
 #ifndef CONFIG_SUN3
 	switch(romvec->pv_romvers) {
@@ -53,10 +48,6 @@ void __init prom_init(struct linux_romvec *rp)
 		prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
 		prom_halt();
 		break;
-	case 42: /* why not :-) */
-		prom_vers = PROM_AP1000;
-		break;
-
 	default:
 		prom_printf("PROMLIB: Bad PROM version %d\n",
 			    romvec->pv_romvers);
diff --git a/arch/m68k/sun3/prom/misc.c b/arch/m68k/sun3/prom/misc.c
index b88716f2c68c..3d60e1337f75 100644
--- a/arch/m68k/sun3/prom/misc.c
+++ b/arch/m68k/sun3/prom/misc.c
@@ -1,4 +1,4 @@
-/* $Id: misc.c,v 1.15 1997/05/14 20:45:00 davem Exp $
+/*
  * misc.c:  Miscellaneous prom functions that don't belong
  *          anywhere else.
  *
diff --git a/arch/m68k/sun3/prom/printf.c b/arch/m68k/sun3/prom/printf.c
index e7bfde377b5e..df85018f487a 100644
--- a/arch/m68k/sun3/prom/printf.c
+++ b/arch/m68k/sun3/prom/printf.c
@@ -1,4 +1,4 @@
-/* $Id: printf.c,v 1.5 1996/04/04 16:31:07 tridge Exp $
+/*
  * printf.c:  Internal prom library printf facility.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
@@ -37,10 +37,6 @@ prom_printf(char *fmt, ...)
 
 	bptr = ppbuf;
 
-#ifdef CONFIG_AP1000
-        ap_write(1,bptr,strlen(bptr));
-#else
-
 #ifdef CONFIG_KGDB
 	if (kgdb_initialized) {
 		printk("kgdb_initialized = %d\n", kgdb_initialized);
@@ -54,7 +50,6 @@ prom_printf(char *fmt, ...)
 		prom_putchar(ch);
 	}
 #endif
-#endif
 	va_end(args);
 	return;
 }
diff --git a/arch/m68k/sun3/sbus.c b/arch/m68k/sun3/sbus.c
deleted file mode 100644
index babdbfa3cda7..000000000000
--- a/arch/m68k/sun3/sbus.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * SBus helper functions
- *
- * Sun3 don't have a sbus, but many of the used devices are also
- * used on Sparc machines with sbus. To avoid having a lot of
- * duplicate code, we provide necessary glue stuff to make using
- * of the sbus driver code possible.
- *
- * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-int __init sbus_init(void)
-{
-	return 0;
-}
-
-void *sparc_alloc_io (u32 address, void *virtual, int len, char *name,
-                      u32 bus_type, int rdonly)
-{
-	return (void *)address;
-}
-
-subsys_initcall(sbus_init);
diff --git a/arch/m68k/sun3/sun3dvma.c b/arch/m68k/sun3/sun3dvma.c
index 8709677fa025..f9277e8b4159 100644
--- a/arch/m68k/sun3/sun3dvma.c
+++ b/arch/m68k/sun3/sun3dvma.c
@@ -29,7 +29,7 @@ static inline void dvma_unmap_iommu(unsigned long a, int b)
 extern void sun3_dvma_init(void);
 #endif
 
-unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
+static unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
 
 #define dvma_index(baddr) ((baddr - DVMA_START) >> DVMA_PAGE_SHIFT)
 
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index cf93481adb1d..7364cd67455e 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -30,7 +30,7 @@ void sun3_enable_interrupts(void)
 	sun3_enable_irq(0);
 }
 
-int led_pattern[8] = {
+static int led_pattern[8] = {
        ~(0x80), ~(0x01),
        ~(0x40), ~(0x02),
        ~(0x20), ~(0x04),
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8e8441587c22..2e7515e8db98 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -58,10 +58,18 @@ config GENERIC_TIME
 	bool
 	default y
 
+config GENERIC_CMOS_UPDATE
+	bool
+	default y
+
 config TIME_LOW_RES
 	bool
 	default y
 
+config GENERIC_CLOCKEVENTS
+	bool
+	default n
+
 config NO_IOPORT
 	def_bool y
 
@@ -108,11 +116,13 @@ config M5206e
 
 config M520x
 	bool "MCF520x"
+	select GENERIC_CLOCKEVENTS
 	help
 	   Freescale Coldfire 5207/5208 processor support.
 
 config M523x
 	bool "MCF523x"
+	select GENERIC_CLOCKEVENTS
 	help
 	  Freescale Coldfire 5230/1/2/4/5 processor support
 
@@ -138,6 +148,7 @@ config M5275
 
 config M528x
 	bool "MCF528x"
+	select GENERIC_CLOCKEVENTS
 	help
 	  Motorola ColdFire 5280/5282 processor support.
 
@@ -161,6 +172,7 @@ endchoice
 config M527x
 	bool
 	depends on (M5271 || M5275)
+	select GENERIC_CLOCKEVENTS
 	default y
 
 config COLDFIRE
@@ -674,6 +686,9 @@ endchoice
 if COLDFIRE
 source "kernel/Kconfig.preempt"
 endif
+
+source "kernel/time/Kconfig"
+
 source "mm/Kconfig"
 
 endmenu
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index e0b5f62e395c..b63bbcf874ff 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -8,6 +8,8 @@
 # (C) Copyright 2002, Greg Ungerer <gerg@snapgear.com>
 #
 
+KBUILD_DEFCONFIG := m5208evb_defconfig
+
 platform-$(CONFIG_M68328)	:= 68328
 platform-$(CONFIG_M68EZ328)	:= 68EZ328
 platform-$(CONFIG_M68VZ328)	:= 68VZ328
@@ -90,13 +92,14 @@ export PLATFORM BOARD MODEL CPUCLASS
 cflags-$(CONFIG_M5206)		:= -m5200
 cflags-$(CONFIG_M5206e)		:= -m5200
 cflags-$(CONFIG_M520x)		:= -m5307
-cflags-$(CONFIG_M523x)		:= -m5307
+cflags-$(CONFIG_M523x)		:= $(call cc-option,-mcpu=523x,-m5307)
 cflags-$(CONFIG_M5249)		:= -m5200
-cflags-$(CONFIG_M527x)		:= -m5307
+cflags-$(CONFIG_M5271)		:= $(call cc-option,-mcpu=5271,-m5307)
 cflags-$(CONFIG_M5272)		:= -m5307
-cflags-$(CONFIG_M528x)		:= -m5307
+cflags-$(CONFIG_M5275)		:= $(call cc-option,-mcpu=5275,-m5307)
+cflags-$(CONFIG_M528x)		:= $(call cc-option,-m528x,-m5307)
 cflags-$(CONFIG_M5307)		:= -m5307
-cflags-$(CONFIG_M532x)		:= -m5307
+cflags-$(CONFIG_M532x)		:= $(call cc-option,-mcpu=532x,-m5307)
 cflags-$(CONFIG_M5407)		:= -m5200
 cflags-$(CONFIG_M68328)		:= -m68000
 cflags-$(CONFIG_M68EZ328)	:= -m68000
diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig
new file mode 100644
index 000000000000..6fae33a05e2a
--- /dev/null
+++ b/arch/m68knommu/configs/m5208evb_defconfig
@@ -0,0 +1,610 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+CONFIG_M520x=y
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=166666666
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5208EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x2000000
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40020000
+# CONFIG_RAMAUTOBIT is not set
+# CONFIG_RAM8BIT is not set
+CONFIG_RAM16BIT=y
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig
new file mode 100644
index 000000000000..cc6458333d67
--- /dev/null
+++ b/arch/m68knommu/configs/m5249evb_defconfig
@@ -0,0 +1,497 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+CONFIG_M5249=y
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=140000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5249C3=y
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig
new file mode 100644
index 000000000000..0d1256f5addb
--- /dev/null
+++ b/arch/m68knommu/configs/m5275evb_defconfig
@@ -0,0 +1,627 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+CONFIG_M5275=y
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_M527x=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=150000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5275EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+CONFIG_FEC2=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig
new file mode 100644
index 000000000000..fe2acdfa4d76
--- /dev/null
+++ b/arch/m68knommu/configs/m5307c3_defconfig
@@ -0,0 +1,580 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+CONFIG_M5307=y
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=90000000
+CONFIG_CLOCK_DIV=2
+# CONFIG_OLDMASK is not set
+
+#
+# Platform
+#
+# CONFIG_ARN5307 is not set
+CONFIG_M5307C3=y
+# CONFIG_eLIA is not set
+# CONFIG_SECUREEDGEMP3 is not set
+# CONFIG_CLEOPATRA is not set
+# CONFIG_NETtel is not set
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig
new file mode 100644
index 000000000000..1118936d20e3
--- /dev/null
+++ b/arch/m68knommu/configs/m5407c3_defconfig
@@ -0,0 +1,641 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+# Wed May  7 10:25:16 2008
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+CONFIG_M5407=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=50000000
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+CONFIG_M5407C3=y
+# CONFIG_CLEOPATRA is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c
index 6ee00effbad2..0a68b5a85f86 100644
--- a/arch/m68knommu/kernel/comempci.c
+++ b/arch/m68knommu/kernel/comempci.c
@@ -375,15 +375,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 
 /*****************************************************************************/
 
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *r, int resource)
-{
-	printk(KERN_WARNING "%s(%d): no support for changing PCI resources...\n",
-		__FILE__, __LINE__);
-}
-
-
-/*****************************************************************************/
-
 /*
  *	Local routines to interrcept the standard I/O and vector handling
  *	code. Don't include this 'till now - initialization code above needs
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 03f4fe6a2fc0..5985f1989021 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/module.h>
+#include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/errno.h>
 #include <linux/string.h>
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index 0ccfb2ad6380..d182b2f72211 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -33,14 +33,13 @@ static inline int set_rtc_mmss(unsigned long nowtime)
 	return -1;
 }
 
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
 irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 {
-	/* last time the cmos clock got updated */
-	static long last_rtc_update=0;
 
 	if (current->pid)
 		profile_tick(CPU_PROFILING);
@@ -49,21 +48,6 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 
 	do_timer(1);
 
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec  / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-	  if (set_rtc_mmss(xtime.tv_sec) == 0)
-	    last_rtc_update = xtime.tv_sec;
-	  else
-	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-
 	write_sequnlock(&xtime_lock);
 
 #ifndef CONFIG_SMP
@@ -71,8 +55,9 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 #endif
 	return(IRQ_HANDLED);
 }
+#endif
 
-void time_init(void)
+static unsigned long read_rtc_mmss(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
@@ -83,10 +68,21 @@ void time_init(void)
 
 	if ((year += 1900) < 1970)
 		year += 100;
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = 0;
-	wall_to_monotonic.tv_sec = -xtime.tv_sec;
 
-	hw_timer_init();
+	return  mktime(year, mon, day, hour, min, sec);;
+}
+
+unsigned long read_persistent_clock(void)
+{
+	return read_rtc_mmss();
 }
 
+int update_persistent_clock(struct timespec now)
+{
+	return set_rtc_mmss(now.tv_sec);
+}
+
+void time_init(void)
+{
+	hw_timer_init();
+}
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index ec9aea652e79..46f8f9d0c408 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -103,12 +103,28 @@ asmlinkage void buserr_c(struct frame *fp)
 	force_sig(SIGSEGV, current);
 }
 
+static void print_this_address(unsigned long addr, int i)
+{
+#ifdef CONFIG_KALLSYMS
+	printk(KERN_EMERG " [%08lx] ", addr);
+	print_symbol(KERN_CONT "%s\n", addr);
+#else
+	if (i % 5)
+		printk(KERN_CONT " [%08lx] ", addr);
+	else
+		printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+	i++;
+#endif
+}
+
 int kstack_depth_to_print = 48;
 
 static void __show_stack(struct task_struct *task, unsigned long *stack)
 {
 	unsigned long *endstack, addr;
+#ifdef CONFIG_FRAME_POINTER
 	unsigned long *last_stack;
+#endif
 	int i;
 
 	if (!stack)
@@ -126,6 +142,7 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 		printk(" %08lx", *(stack + i));
 	}
 	printk("\n");
+	i = 0;
 
 #ifdef CONFIG_FRAME_POINTER
 	printk(KERN_EMERG "Call Trace:\n");
@@ -134,15 +151,30 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 	while (stack <= endstack && stack > last_stack) {
 
 		addr = *(stack + 1);
-		printk(KERN_EMERG " [%08lx] ", addr);
-		print_symbol(KERN_CONT "%s\n", addr);
+		print_this_address(addr, i);
+		i++;
 
 		last_stack = stack;
 		stack = (unsigned long *)*stack;
 	}
 	printk("\n");
 #else
-	printk(KERN_EMERG "CONFIG_FRAME_POINTER disabled, no symbolic call trace\n");
+	printk(KERN_EMERG "Call Trace with CONFIG_FRAME_POINTER disabled:\n");
+	while (stack <= endstack) {
+		addr = *stack++;
+		/*
+		 * If the address is either in the text segment of the kernel,
+		 * or in a region which is occupied by a module then it *may*
+		 * be the address of a calling routine; if so, print it so that
+		 * someone tracing down the cause of the crash will be able to
+		 * figure out the call path that was taken.
+		 */
+		if (__kernel_text_address(addr)) {
+			print_this_address(addr, i);
+			i++;
+		}
+	}
+	printk(KERN_CONT "\n");
 #endif
 }
 
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 93e69236ed6f..69ba9b10767a 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -62,6 +62,7 @@ SECTIONS {
 	.text : {
 		_text = .;
 		_stext = . ;
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index 22e2a0d02b81..3bf249c53e41 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -62,33 +62,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 40cf20be1b90..4f416a91a829 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_COLDFIRE)	+= dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= timers.o
 obj-$(CONFIG_M5206e)	+= timers.o
 obj-$(CONFIG_M520x)	+= pit.o
-obj-$(CONFIG_M523x)	+= pit.o
+obj-$(CONFIG_M523x)	+= pit.o dma_timer.o
 obj-$(CONFIG_M5249)	+= timers.o
 obj-$(CONFIG_M527x)	+= pit.o
 obj-$(CONFIG_M5272)	+= timers.o
diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c
new file mode 100644
index 000000000000..772578b1084f
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/dma_timer.c
@@ -0,0 +1,84 @@
+/*
+ * dma_timer.c -- Freescale ColdFire DMA Timer.
+ *
+ * Copyright (C) 2007, Benedikt Spranger <b.spranger@linutronix.de>
+ * Copyright (C) 2008. Sebastian Siewior, Linutronix
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+#define DMA_TIMER_0	(0x00)
+#define DMA_TIMER_1	(0x40)
+#define DMA_TIMER_2	(0x80)
+#define DMA_TIMER_3	(0xc0)
+
+#define DTMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x400)
+#define DTXMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x402)
+#define DTER0	(MCF_IPSBAR + DMA_TIMER_0 + 0x403)
+#define DTRR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x404)
+#define DTCR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x408)
+#define DTCN0	(MCF_IPSBAR + DMA_TIMER_0 + 0x40c)
+
+#define DMA_FREQ    ((MCF_CLK / 2) / 16)
+
+/* DTMR */
+#define DMA_DTMR_RESTART	(1 << 3)
+#define DMA_DTMR_CLK_DIV_1	(1 << 1)
+#define DMA_DTMR_CLK_DIV_16	(2 << 1)
+#define DMA_DTMR_ENABLE		(1 << 0)
+
+static cycle_t cf_dt_get_cycles(void)
+{
+	return __raw_readl(DTCN0);
+}
+
+static struct clocksource clocksource_cf_dt = {
+	.name		= "coldfire_dma_timer",
+	.rating		= 200,
+	.read		= cf_dt_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init  init_cf_dt_clocksource(void)
+{
+	/*
+	 * We setup DMA timer 0 in free run mode. This incrementing counter is
+	 * used as a highly precious clock source. With MCF_CLOCK = 150 MHz we
+	 * get a ~213 ns resolution and the 32bit register will overflow almost
+	 * every 15 minutes.
+	 */
+	__raw_writeb(0x00, DTXMR0);
+	__raw_writeb(0x00, DTER0);
+	__raw_writel(0x00000000, DTRR0);
+	__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
+	clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
+						     clocksource_cf_dt.shift);
+	return clocksource_register(&clocksource_cf_dt);
+}
+
+arch_initcall(init_cf_dt_clocksource);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+#define CYC2NS_SCALE	((1000000 << CYC2NS_SCALE_FACTOR) / (DMA_FREQ / 1000))
+
+static unsigned long long cycles2ns(unsigned long cycl)
+{
+	return (unsigned long long) ((unsigned long long)cycl *
+			CYC2NS_SCALE) >> CYC2NS_SCALE_FACTOR;
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long cycl = __raw_readl(DTCN0);
+
+	return cycles2ns(cycl);
+}
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
index b9aa0ca29bfb..2b0d73c0cc32 100644
--- a/arch/m68knommu/platform/coldfire/head.S
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -10,6 +10,7 @@
 
 #include <linux/sys.h>
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/asm-offsets.h>
 #include <asm/coldfire.h>
 #include <asm/mcfcache.h>
@@ -126,7 +127,7 @@ _ramend:
 
 /*****************************************************************************/
 
-.text
+__HEAD
 
 /*
  *	This is the codes first entry point. This is where it all
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 4290638012e0..c5b916700b22 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
 #include <asm/coldfire.h>
@@ -33,22 +33,86 @@
 #define	FREQ	((MCF_CLK / 2) / 64)
 #define	TA(a)	(MCF_IPSBAR + MCFPIT_BASE1 + (a))
 #define	INTC0	(MCF_IPSBAR + MCFICM_INTC0)
+#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
 
-static u32 pit_cycles_per_jiffy;
 static u32 pit_cnt;
 
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+
+static void init_cf_pit_timer(enum clock_event_mode mode,
+                             struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \
+				MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \
+				TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		/* Nothing to do here */
+		break;
+	}
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int cf_pit_next_event(unsigned long delta,
+		struct clock_event_device *evt)
+{
+	__raw_writew(delta, TA(MCFPIT_PMR));
+	return 0;
+}
+
+struct clock_event_device cf_pit_clockevent = {
+	.name		= "pit",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= init_cf_pit_timer,
+	.set_next_event	= cf_pit_next_event,
+	.shift		= 32,
+	.irq		= MCFINT_VECBASE + MCFINT_PIT1,
+};
+
+
+
 /***************************************************************************/
 
 static irqreturn_t pit_tick(int irq, void *dummy)
 {
+	struct clock_event_device *evt = &cf_pit_clockevent;
 	u16 pcsr;
 
 	/* Reset the ColdFire timer */
 	pcsr = __raw_readw(TA(MCFPIT_PCSR));
 	__raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
 
-	pit_cnt += pit_cycles_per_jiffy;
-	return arch_timer_interrupt(irq, dummy);
+	pit_cnt += PIT_CYCLES_PER_JIFFY;
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
 }
 
 /***************************************************************************/
@@ -72,14 +136,14 @@ static cycle_t pit_read_clk(void)
 	cycles = pit_cnt;
 	local_irq_restore(flags);
 
-	return cycles + pit_cycles_per_jiffy - pcntr;
+	return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
 }
 
 /***************************************************************************/
 
 static struct clocksource pit_clk = {
 	.name	= "pit",
-	.rating	= 250,
+	.rating	= 100,
 	.read	= pit_read_clk,
 	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
@@ -92,6 +156,14 @@ void hw_timer_init(void)
 {
 	u32 imr;
 
+	cf_pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id());
+	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
+	cf_pit_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
+	cf_pit_clockevent.min_delta_ns =
+		clockevent_delta2ns(0x3f, &cf_pit_clockevent);
+	clockevents_register_device(&cf_pit_clockevent);
+
 	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
 
 	__raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1);
@@ -99,13 +171,6 @@ void hw_timer_init(void)
 	imr &= ~MCFPIT_IMR_IBIT;
 	__raw_writel(imr, INTC0 + MCFPIT_IMR);
 
-	/* Set up PIT timer 1 as poll clock */
-	pit_cycles_per_jiffy = FREQ / HZ;
-	__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
-	__raw_writew(pit_cycles_per_jiffy, TA(MCFPIT_PMR));
-	__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | MCFPIT_PCSR_OVW |
-		MCFPIT_PCSR_RLD | MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
-
 	pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
 	clocksource_register(&pit_clk);
 }
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 24c5dee91768..b4c4eaa5dd26 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -181,38 +181,6 @@ config LEMOTE_FULONG
 	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
 	  an FPGA northbridge
 
-config MIPS_ATLAS
-	bool "MIPS Atlas board"
-	select BOOT_ELF32
-	select BOOT_RAW
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select IRQ_CPU
-	select HW_HAS_PCI
-	select MIPS_BOARDS_GEN
-	select MIPS_BONITO64
-	select PCI_GT64XXX_PCI0
-	select MIPS_MSC
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_CPU_NEVADA
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
-	select SYS_SUPPORTS_SMARTMIPS
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  This enables support for the MIPS Technologies Atlas evaluation
-	  board.
-
 config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
@@ -249,26 +217,6 @@ config MIPS_MALTA
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
 
-config MIPS_SEAD
-	bool "MIPS SEAD board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_CPU
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select MIPS_BOARDS_GEN
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_SMARTMIPS
-	help
-	  This enables support for the MIPS Technologies SEAD evaluation
-	  board.
-
 config MIPS_SIM
 	bool 'MIPS simulator (MIPSsim)'
 	select CEVT_R4K
@@ -382,6 +330,7 @@ config SGI_IP22
 	select SGI_HAS_DS1286
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
+	select SGI_HAS_HAL2
 	select SGI_HAS_SEEQ
 	select SGI_HAS_WD93
 	select SGI_HAS_ZILOG
@@ -437,6 +386,7 @@ config SGI_IP28
 	select SGI_HAS_DS1286
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
+	select SGI_HAS_HAL2
 	select SGI_HAS_SEEQ
 	select SGI_HAS_WD93
 	select SGI_HAS_ZILOG
@@ -602,65 +552,29 @@ config SNI_RM
 	  Technology and now in turn merged with Fujitsu.  Say Y here to
 	  support this machine type.
 
-config TOSHIBA_JMR3927
-	bool "Toshiba JMR-TX3927 board"
-	select CEVT_TXX9
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select MIPS_TX3927
-	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX39XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select GPIO_TXX9
+config MACH_TX39XX
+	bool "Toshiba TX39 series based machines"
 
-config TOSHIBA_RBTX4927
-	bool "Toshiba RBTX49[23]7 board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select CEVT_TXX9
-	select DMA_NONCOHERENT
-	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_TXX9
-	select I8259 if TOSHIBA_FPCIB0
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  This Toshiba board is based on the TX4927 processor. Say Y here to
-	  support this machine type
+config MACH_TX49XX
+	bool "Toshiba TX49 series based machines"
 
-config TOSHIBA_RBTX4938
-	bool "Toshiba RBTX4938 board"
+config MIKROTIK_RB532
+	bool "Mikrotik RB532 boards"
 	select CEVT_R4K
 	select CSRC_R4K
-	select CEVT_TXX9
 	select DMA_NONCOHERENT
-	select HAS_TXX9_SERIAL
+	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select HW_HAS_PCI
 	select IRQ_CPU
-	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
+	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select GPIO_TXX9
+	select SWAP_IO_SPACE
+	select BOOT_RAW
+	select GENERIC_GPIO
 	help
-	  This Toshiba board is based on the TX4938 processor. Say Y here to
-	  support this machine type
+	  Support the Mikrotik(tm) RouterBoard 532 series,
+	  based on the IDT RC32434 SoC.
 
 config WR_PPMC
 	bool "Wind River PPMC board"
@@ -694,8 +608,7 @@ source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
-source "arch/mips/tx4927/Kconfig"
-source "arch/mips/tx4938/Kconfig"
+source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 
 endmenu
@@ -800,7 +713,7 @@ config CSRC_SB1250
 
 config GPIO_TXX9
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	bool
 
 config CFE
@@ -939,10 +852,6 @@ config PCI_GT64XXX_PCI0
 config NO_EXCEPT_FILL
 	bool
 
-config MIPS_TX3927
-	bool
-	select HAS_TXX9_SERIAL
-
 config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
@@ -979,6 +888,9 @@ config SGI_HAS_DS1286
 config SGI_HAS_INDYDOG
 	bool
 
+config SGI_HAS_HAL2
+	bool
+
 config SGI_HAS_SEEQ
 	bool
 
@@ -1005,7 +917,7 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
 	int
-	default "4" if MACH_DECSTATION
+	default "4" if MACH_DECSTATION || MIKROTIK_RB532
 	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
 	default "4" if PMC_MSP4200_EVAL
 	default "5"
@@ -1763,6 +1675,7 @@ config SMP
 	bool "Multi-Processing support"
 	depends on SYS_SUPPORTS_SMP
 	select IRQ_PER_CPU
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -2064,10 +1977,6 @@ source "fs/Kconfig.binfmt"
 config TRAD_SIGNALS
 	bool
 
-config BINFMT_IRIX
-	bool "Include IRIX binary compatibility"
-	depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
-
 config MIPS32_COMPAT
 	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
 	depends on 64BIT
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ad36c946ff96..9aab51caf16a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -14,7 +14,7 @@
 
 KBUILD_DEFCONFIG := ip22_defconfig
 
-cflags-y :=
+cflags-y := -ffunction-sections
 
 #
 # Select the object file format to substitute into the linker script.
@@ -305,36 +305,14 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
 cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
 
 #
-# For all MIPS, Inc. eval boards
-#
-core-$(CONFIG_MIPS_BOARDS_GEN)	+= arch/mips/mips-boards/generic/
-
-#
-# MIPS Atlas board
-#
-core-$(CONFIG_MIPS_ATLAS)	+= arch/mips/mips-boards/atlas/
-cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-atlas
-cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-mips
-load-$(CONFIG_MIPS_ATLAS)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_ATLAS)	:= vmlinux.bin
-
-#
 # MIPS Malta board
 #
-core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mips-boards/malta/
-cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-mips
+core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mti-malta/
+cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-malta
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
 all-$(CONFIG_MIPS_MALTA)	:= vmlinux.bin
 
 #
-# MIPS SEAD board
-#
-core-$(CONFIG_MIPS_SEAD)	+= arch/mips/mips-boards/sead/
-cflags-$(CONFIG_MIPS_SEAD)	+= -Iinclude/asm-mips/mach-mips
-load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_SEAD)		:= vmlinux.srec
-
-#
 # MIPS SIM
 #
 core-$(CONFIG_MIPS_SIM)		+= arch/mips/mipssim/
@@ -377,12 +355,6 @@ core-$(CONFIG_MACH_VR41XX)	+= arch/mips/vr41xx/common/
 cflags-$(CONFIG_MACH_VR41XX)	+= -Iinclude/asm-mips/mach-vr41xx
 
 #
-# NEC VR4133
-#
-core-$(CONFIG_NEC_CMBVR4133)	+= arch/mips/vr41xx/nec-cmbvr4133/
-load-$(CONFIG_NEC_CMBVR4133)	+= 0xffffffff80100000
-
-#
 # ZAO Networks Capcella (VR4131)
 #
 load-$(CONFIG_ZAO_CAPCELLA)	+= 0xffffffff80000000
@@ -573,29 +545,37 @@ endif
 all-$(CONFIG_SNI_RM)		:= vmlinux.ecoff
 
 #
+# Common TXx9
+#
+core-$(CONFIG_MACH_TX39XX)	+= arch/mips/txx9/generic/
+cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-tx39xx
+load-$(CONFIG_MACH_TX39XX)	+= 0xffffffff80050000
+core-$(CONFIG_MACH_TX49XX)	+= arch/mips/txx9/generic/
+cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx
+load-$(CONFIG_MACH_TX49XX)	+= 0xffffffff80100000
+
+#
 # Toshiba JMR-TX3927 board
 #
-core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/jmr3927/rbhma3100/ \
-				   arch/mips/jmr3927/common/
-cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
-load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
+core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/txx9/jmr3927/
+
+#
+# Routerboard 532 board
+#
+core-$(CONFIG_MIKROTIK_RB532)	+= arch/mips/rb532/
+cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434
+load-$(CONFIG_MIKROTIK_RB532)	+= 0xffffffff80101000
 
 #
 # Toshiba RBTX4927 board or
 # Toshiba RBTX4937 board
 #
-core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/toshiba_rbtx4927/
-core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/common/
-cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx
-load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
+core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/txx9/rbtx4927/
 
 #
 # Toshiba RBTX4938 board
 #
-core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
-core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
-cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
-load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
 
 cflags-y			+= -Iinclude/asm-mips/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 74d6d4a593be..dc8a67efac28 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/init.h>
@@ -77,14 +78,14 @@ static struct resource au1xxx_usb_ohci_resources[] = {
 };
 
 /* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
+static u64 ohci_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_ohci_device = {
 	.name		= "au1xxx-ohci",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_ohci_resources),
 	.resource	= au1xxx_usb_ohci_resources,
@@ -106,14 +107,14 @@ static struct resource au1100_lcd_resources[] = {
 	}
 };
 
-static u64 au1100_lcd_dmamask = ~(u32)0;
+static u64 au1100_lcd_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1100_lcd_device = {
 	.name           = "au1100-lcd",
 	.id             = 0,
 	.dev = {
 		.dma_mask               = &au1100_lcd_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 	.num_resources  = ARRAY_SIZE(au1100_lcd_resources),
 	.resource       = au1100_lcd_resources,
@@ -135,14 +136,14 @@ static struct resource au1xxx_usb_ehci_resources[] = {
 	},
 };
 
-static u64 ehci_dmamask = ~(u32)0;
+static u64 ehci_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_ehci_device = {
 	.name		= "au1xxx-ehci",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_ehci_resources),
 	.resource	= au1xxx_usb_ehci_resources,
@@ -180,14 +181,14 @@ static struct resource au1xxx_mmc_resources[] = {
 	}
 };
 
-static u64 udc_dmamask = ~(u32)0;
+static u64 udc_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_gdt_device = {
 	.name		= "au1xxx-udc",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &udc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_gdt_resources),
 	.resource	= au1xxx_usb_gdt_resources,
@@ -207,14 +208,14 @@ static struct resource au1xxx_usb_otg_resources[] = {
 	},
 };
 
-static u64 uoc_dmamask = ~(u32)0;
+static u64 uoc_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_otg_device = {
 	.name		= "au1xxx-uoc",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &uoc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_otg_resources),
 	.resource	= au1xxx_usb_otg_resources,
@@ -233,27 +234,27 @@ static struct resource au1200_lcd_resources[] = {
 	}
 };
 
-static u64 au1200_lcd_dmamask = ~(u32)0;
+static u64 au1200_lcd_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1200_lcd_device = {
 	.name           = "au1200-lcd",
 	.id             = 0,
 	.dev = {
 		.dma_mask               = &au1200_lcd_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 	.num_resources  = ARRAY_SIZE(au1200_lcd_resources),
 	.resource       = au1200_lcd_resources,
 };
 
-static u64 au1xxx_mmc_dmamask =  ~(u32)0;
+static u64 au1xxx_mmc_dmamask =  DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_mmc_device = {
 	.name = "au1xxx-mmc",
 	.id = 0,
 	.dev = {
 		.dma_mask               = &au1xxx_mmc_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 	.num_resources  = ARRAY_SIZE(au1xxx_mmc_resources),
 	.resource       = au1xxx_mmc_resources,
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index 2166b9e1e80c..bd854a6d1d89 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -31,7 +31,6 @@
 
 #include <linux/init.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sysctl.h>
 #include <linux/jiffies.h>
 
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index 9807be37c32f..8b5914d1241f 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -24,6 +24,9 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <mtd/mtd-abi.h>
 
 static struct gpio_keys_button mtx1_gpio_button[] = {
 	{
@@ -85,10 +88,56 @@ static struct platform_device mtx1_gpio_leds = {
 	}
 };
 
+static struct mtd_partition mtx1_mtd_partitions[] = {
+	{
+		.name	= "filesystem",
+		.size	= 0x01C00000,
+		.offset	= 0,
+	},
+	{
+		.name	= "yamon",
+		.size	= 0x00100000,
+		.offset	= MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "kernel",
+		.size	= 0x002c0000,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+	{
+		.name	= "yamon env",
+		.size	= 0x00040000,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data mtx1_flash_data = {
+	.width		= 4,
+	.nr_parts	= 4,
+	.parts		= mtx1_mtd_partitions,
+};
+
+static struct resource mtx1_mtd_resource = {
+	.start	= 0x1e000000,
+	.end	= 0x1fffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mtx1_mtd = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &mtx1_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &mtx1_mtd_resource,
+};
+
 static struct __initdata platform_device * mtx1_devs[] = {
 	&mtx1_gpio_leds,
 	&mtx1_wdt,
-	&mtx1_button
+	&mtx1_button,
+	&mtx1_mtd,
 };
 
 static int __init mtx1_register_devices(void)
diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/au1000/pb1200/platform.c
index 5930110b9b6d..f8fb0aeac571 100644
--- a/arch/mips/au1000/pb1200/platform.c
+++ b/arch/mips/au1000/pb1200/platform.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
@@ -36,14 +37,14 @@ static struct resource ide_resources[] = {
 	}
 };
 
-static u64 ide_dmamask = ~(u32)0;
+static u64 ide_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device ide_device = {
 	.name		= "au1200-ide",
 	.id		= 0,
 	.dev = {
 		.dma_mask 		= &ide_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(ide_resources),
 	.resource	= ide_resources
diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
index 476d20e08d0e..a1e3526b4a94 100644
--- a/arch/mips/basler/excite/excite_iodev.c
+++ b/arch/mips/basler/excite/excite_iodev.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/miscdevice.h>
+#include <linux/smp_lock.h>
 
 #include "excite_iodev.h"
 
@@ -110,8 +111,14 @@ static int __exit iodev_remove(struct device *dev)
 
 static int iodev_open(struct inode *i, struct file *f)
 {
-	return request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
+	int ret;
+
+	lock_kernel();
+	ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
 			   iodev_name, &miscdev);
+	unlock_kernel();
+
+	return ret;
 }
 
 static int iodev_release(struct inode *i, struct file *f)
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index d73833b7c781..237926288d6d 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the Cobalt micro systems family specific parts of the kernel
 #
 
-obj-y := buttons.o irq.o led.o reset.o rtc.o serial.o setup.o time.o
+obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o
 
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
new file mode 100644
index 000000000000..0720e4fae311
--- /dev/null
+++ b/arch/mips/cobalt/lcd.c
@@ -0,0 +1,55 @@
+/*
+ *  Registration of Cobalt LCD platform device.
+ *
+ *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+static struct resource cobalt_lcd_resource __initdata = {
+	.start	= 0x1f000000,
+	.end	= 0x1f00001f,
+	.flags	= IORESOURCE_MEM,
+};
+
+static __init int cobalt_lcd_add(void)
+{
+	struct platform_device *pdev;
+	int retval;
+
+	pdev = platform_device_alloc("cobalt-lcd", -1);
+	if (!pdev)
+		return -ENOMEM;
+
+	retval = platform_device_add_resources(pdev, &cobalt_lcd_resource, 1);
+	if (retval)
+		goto err_free_device;
+
+	retval = platform_device_add(pdev);
+	if (retval)
+		goto err_free_device;
+
+	return 0;
+
+err_free_device:
+	platform_device_put(pdev);
+
+	return retval;
+}
+device_initcall(cobalt_lcd_add);
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index dd23beb8604f..b51644227241 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -81,8 +81,8 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
 
-	/* I/O port resource must include LCD/buttons */
-	ioport_resource.end = 0x0fffffff;
+	/* I/O port resource */
+	ioport_resource.end = 0x01ffffff;
 
 	/* These resources have been reserved by VIA SuperI/O chip. */
 	for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++)
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
deleted file mode 100644
index 3443f6cd57bb..000000000000
--- a/arch/mips/configs/atlas_defconfig
+++ /dev/null
@@ -1,1472 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:27:35 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MIPS_ATLAS=y
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_MIPS_BONITO64=y
-CONFIG_MIPS_MSC=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_GT64120=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
-
-#
-# SCSI low-level drivers
-#
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_LAN_SAA9730=y
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index c0e42e74dfbd..d8694332b344 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -16,9 +16,7 @@ CONFIG_BCM47XX=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 3b42cea2e402..a3bbbf067a3b 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 08:11:19 2008
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  2 17:02:55 2008
 #
 CONFIG_MIPS=y
 
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -148,6 +146,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -156,6 +155,7 @@ CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_4=y
 CONFIG_NR_CPUS=4
+# CONFIG_MIPS_CMP is not set
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -223,6 +223,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -241,12 +242,14 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -302,7 +305,6 @@ CONFIG_BINFMT_ELF32=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -399,9 +401,11 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -600,7 +604,7 @@ CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_BLK_DEV_IDE_SWARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -617,11 +621,12 @@ CONFIG_SCSI_PROC_FS=y
 # SCSI support type (disk, tape, CD-ROM)
 #
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
+CONFIG_CHR_DEV_ST=m
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -650,6 +655,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
@@ -675,7 +681,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -685,7 +694,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -730,12 +738,17 @@ CONFIG_PATA_SIL680=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -797,7 +810,6 @@ CONFIG_SB1250_MAC=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -815,6 +827,7 @@ CONFIG_NETXEN_NIC=m
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -822,6 +835,7 @@ CONFIG_NETXEN_NIC=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -867,6 +881,7 @@ CONFIG_SERIO_RAW=m
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -903,7 +918,6 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -914,13 +928,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -946,6 +953,7 @@ CONFIG_I2C_SIBYTE=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -955,23 +963,18 @@ CONFIG_SENSORS_EEPROM=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
-# CONFIG_TPS65010 is not set
 CONFIG_SENSORS_MAX6875=y
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -984,12 +987,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -1015,6 +1028,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1023,13 +1038,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1123,7 +1135,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1194,6 +1205,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1204,6 +1216,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1217,6 +1230,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1237,53 +1251,82 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=y
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1292,9 +1335,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index a94f14b5c8fa..185df23fd460 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index b7295e988381..2678b7ec3351 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 36578968d386..ebb8ad62b3a3 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 5a90740c363a..ad4e5ef65592 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index 76f37a1159fe..d0dc2e83ad35 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 508c91944f30..9155082313c8 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 0c2c70d21db9..e4e324422cd9 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 58c2cd68c3a7..9e65e6a2dcb3 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 90d81f5dcebc..1bd84d42b14f 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index f9a003c2b3a1..634bb4eaf132 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 15efacc75d73..3572e80356d2 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -27,9 +27,7 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index 5887a1735fba..620980081a30 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -14,9 +14,7 @@ CONFIG_LEMOTE_FULONG=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 4f5e56c9335e..cc8e6bf2b245 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -15,9 +15,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index f40e437bd9e5..138c575a0151 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index ec188be9a67a..822b01f643e3 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 2c5c624c5d42..fe4699df9626 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 56148745e8f2..bbacc35d804f 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 CONFIG_MACH_JAZZ=y
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index a7cd67753aac..9d5bd2a0af3d 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Aug  2 23:07:36 2007
+# Linux kernel version: 2.6.26-rc9
+# Fri Jul 11 23:01:36 2008
 #
 CONFIG_MIPS=y
 
@@ -10,13 +10,13 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -26,6 +26,7 @@ CONFIG_MIPS=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -36,28 +37,37 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-CONFIG_TOSHIBA_JMR3927=y
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_MACH_TX39XX=y
+# CONFIG_MACH_TX49XX is not set
 # CONFIG_WR_PPMC is not set
+CONFIG_TOSHIBA_JMR3927=y
+CONFIG_SOC_TX3927=y
+# CONFIG_TOSHIBA_FPCIB0 is not set
+CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_TXX9=y
+CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_TXX9=y
-CONFIG_MIPS_TX3927=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
@@ -104,13 +114,20 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -144,18 +161,25 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -168,6 +192,14 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -189,20 +221,19 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -212,6 +243,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 
 #
@@ -245,25 +277,21 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -271,6 +299,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 
@@ -279,6 +308,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -307,6 +337,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -318,10 +349,6 @@ CONFIG_BLK_DEV=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
@@ -329,7 +356,7 @@ CONFIG_BLK_DEV=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -339,10 +366,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
 # CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -351,6 +395,10 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -358,13 +406,13 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -379,6 +427,7 @@ CONFIG_TC35815=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -400,7 +449,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -424,6 +472,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -431,7 +480,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
@@ -463,22 +511,30 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
 
 #
-# SPI support
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -495,29 +551,46 @@ CONFIG_TXX9_WDT=y
 # CONFIG_WDTPCI is not set
 
 #
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Sound
@@ -526,7 +599,9 @@ CONFIG_TXX9_WDT=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -551,9 +626,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=y
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -561,23 +637,6 @@ CONFIG_RTC_DRV_DS1742=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -590,12 +649,10 @@ CONFIG_RTC_DRV_DS1742=y
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -622,7 +679,7 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -630,17 +687,15 @@ CONFIG_RAMFS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -656,10 +711,6 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
@@ -667,13 +718,15 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -687,6 +740,7 @@ CONFIG_CMDLINE=""
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index e6aef999854c..bc9159fda728 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -15,9 +15,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 CONFIG_LASAT=y
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 3d0da952811c..74daa0cf87e6 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -15,9 +15,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_MALTA=y
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -68,7 +66,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_PCI_GT64XXX_PCI0=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 4f6bce99d5cf..2c0a6314e901 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 CONFIG_MIPS_SIM=y
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 27e23fc9363a..8c720e51795b 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index b12b73f6d74f..59d19472b161 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index fa3aa3919448..bacf0dd0e345 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -14,9 +14,7 @@ CONFIG_MACH_ALCHEMY=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 1d0157d3a5bb..6dfe6f793cef 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index d0491a05ee58..c965a87e6a96 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 16d78d3cd2aa..0778996c682f 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 780c7fc24b82..37c7b5ffd474 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 267f21ed1d0f..893e5c4ab66d 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
new file mode 100644
index 000000000000..f28dc32974e5
--- /dev/null
+++ b/arch/mips/configs/rb532_defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25
+# Mon Apr 28 12:24:17 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+CONFIG_MIKROTIK_RB532=y
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="vegas"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+# CONFIG_NET_ACT_NAT is not set
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+CONFIG_PATA_RB532=y
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_IFB=m
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_KORINA=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_NAPI=y
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+CONFIG_ATMEL=m
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig
deleted file mode 100644
index 470f6f4d3ea2..000000000000
--- a/arch/mips/configs/rbhma4200_defconfig
+++ /dev/null
@@ -1,669 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Aug  2 22:55:57 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-CONFIG_TOSHIBA_RBTX4927=y
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_TOSHIBA_FPCIB0 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_TXX9=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-CONFIG_CPU_TX49XX=y
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_TX49XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# An alternative FireWire stack is available with EXPERIMENTAL=y
-#
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NE2000=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_TXX9=y
-CONFIG_HAS_TXX9_SERIAL=y
-CONFIG_SERIAL_TXX9_NR_UARTS=6
-CONFIG_SERIAL_TXX9_CONSOLE=y
-CONFIG_SERIAL_TXX9_STDSERIAL=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_TXX9_WDT=m
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-CONFIG_RTC_DRV_DS1742=y
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 5a39f56b175e..e42aed5a38bb 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Aug  2 22:59:53 2007
+# Linux kernel version: 2.6.26-rc9
+# Fri Jul 11 23:03:21 2008
 #
 CONFIG_MIPS=y
 
@@ -10,13 +10,13 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -26,6 +26,7 @@ CONFIG_MIPS=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -36,10 +37,15 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-CONFIG_TOSHIBA_RBTX4938=y
+# CONFIG_MACH_TX39XX is not set
+CONFIG_MACH_TX49XX=y
 # CONFIG_WR_PPMC is not set
+CONFIG_TOSHIBA_RBTX4927=y
+CONFIG_TOSHIBA_RBTX4938=y
+CONFIG_SOC_TX4927=y
+CONFIG_SOC_TX4938=y
+# CONFIG_TOSHIBA_FPCIB0 is not set
+CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
 
 #
 # Multiplex Pin Select
@@ -47,21 +53,30 @@ CONFIG_TOSHIBA_RBTX4938=y
 CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_PCI_TX4927=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_TXX9=y
+CONFIG_CSRC_R4K=y
+CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
@@ -94,6 +109,7 @@ CONFIG_CPU_TX49XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_TX49XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -115,13 +131,20 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -156,19 +179,26 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
@@ -181,9 +211,18 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -205,20 +244,19 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
 CONFIG_MMU=y
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -228,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 
 #
@@ -262,26 +301,22 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -289,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 
@@ -297,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -325,10 +362,11 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -340,10 +378,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
@@ -351,7 +385,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -361,10 +395,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
 # CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -374,6 +425,10 @@ CONFIG_MII=y
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NE2000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -381,13 +436,13 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -402,6 +457,7 @@ CONFIG_TC35815=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -426,6 +482,7 @@ CONFIG_TC35815=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -449,17 +506,11 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -473,9 +524,25 @@ CONFIG_SPI_TXX9=y
 #
 CONFIG_SPI_AT25=y
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -492,29 +559,46 @@ CONFIG_TXX9_WDT=m
 # CONFIG_WDTPCI is not set
 
 #
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Sound
@@ -522,7 +606,9 @@ CONFIG_TXX9_WDT=m
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -542,16 +628,18 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 #
 # SPI RTC drivers
 #
-CONFIG_RTC_DRV_RS5C348=y
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+CONFIG_RTC_DRV_RS5C348=y
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -559,23 +647,6 @@ CONFIG_RTC_DRV_RS5C348=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -588,12 +659,10 @@ CONFIG_RTC_DRV_RS5C348=y
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -622,7 +691,7 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -630,18 +699,16 @@ CONFIG_RAMFS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -658,10 +725,6 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
@@ -669,13 +732,15 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 CONFIG_SYS_SUPPORTS_KGDB=y
 
@@ -690,6 +755,7 @@ CONFIG_SYS_SUPPORTS_KGDB=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 56371b860eb0..0f4da0325ea4 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 4b8799802788..1ea97865f2ce 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
deleted file mode 100644
index 3ee75b15c0b0..000000000000
--- a/arch/mips/configs/sead_defconfig
+++ /dev/null
@@ -1,642 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:28:10 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_SEAD=y
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=18432
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index 8dd3ae39bcad..b5059881bc7e 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 2ba240e897c6..b06a716bf23f 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index a5d0f3c55ed1..46512cf7ce04 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index edf90b321fe6..b437eb7f8672 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index 2e3c683b2052..fc2c56731b98 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 CONFIG_WR_PPMC=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index b6178ffbc523..7f86c43d1bda 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma2rh/common/prom.c
index 0f791eb6bb66..5e92b3a9c5b8 100644
--- a/arch/mips/emma2rh/common/prom.c
+++ b/arch/mips/emma2rh/common/prom.c
@@ -34,12 +34,11 @@
 
 const char *get_system_type(void)
 {
-	switch (mips_machtype) {
-	case MACH_NEC_MARKEINS:
-		return "NEC EMMA2RH Mark-eins";
-	default:
-		return "Unknown NEC board";
-	}
+#if defined(CONFIG_MARKEINS)
+	return "NEC EMMA2RH Mark-eins";
+#else
+#error  Unknown NEC board
+#endif
 }
 
 /* [jsun@junsun.net] PMON passes arguments in C main() style */
@@ -63,10 +62,10 @@ void __init prom_init(void)
 	}
 
 #if defined(CONFIG_MARKEINS)
-	mips_machtype = MACH_NEC_MARKEINS;
 	add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM);
+#else
+#error  Unknown NEC board
 #endif
-
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c
index 23066985a734..0ce9acf10c39 100644
--- a/arch/mips/fw/arc/identify.c
+++ b/arch/mips/fw/arc/identify.c
@@ -22,7 +22,6 @@
 struct smatch {
 	char *arcname;
 	char *liname;
-	int type;
 	int flags;
 };
 
@@ -30,47 +29,38 @@ static struct smatch mach_table[] = {
 	{
 		.arcname	= "SGI-IP22",
 		.liname		= "SGI Indy",
-		.type		= MACH_SGI_IP22,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP27",
 		.liname		= "SGI Origin",
-		.type		= MACH_SGI_IP27,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP28",
 		.liname		= "SGI IP28",
-		.type		= MACH_SGI_IP28,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP30",
 		.liname		= "SGI Octane",
-		.type		= MACH_SGI_IP30,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP32",
 		.liname		= "SGI O2",
-		.type		= MACH_SGI_IP32,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "Microsoft-Jazz",
 		.liname		= "Jazz MIPS_Magnum_4000",
-		.type		= MACH_MIPS_MAGNUM_4000,
 		.flags		= 0,
 	}, {
 		.arcname	= "PICA-61",
 		.liname		= "Jazz Acer_PICA_61",
-		.type		= MACH_ACER_PICA_61,
 		.flags		= 0,
 	}, {
 		.arcname	= "RM200PCI",
 		.liname		= "SNI RM200_PCI",
-		.type		= MACH_SNI_RM200_PCI,
 		.flags		= PROM_FLAG_DONT_FREE_TEMP,
 	}, {
 		.arcname	= "RM200PCI-R5K",
 		.liname		= "SNI RM200_PCI-R5K",
-		.type		= MACH_SNI_RM200_PCI,
 		.flags		= PROM_FLAG_DONT_FREE_TEMP,
 	}
 };
@@ -121,6 +111,5 @@ void __init prom_identify_arch(void)
 	mach = string_to_mach(iname);
 	system_type = mach->liname;
 
-	mips_machtype = mach->type;
 	prom_flags = mach->flags;
 }
diff --git a/arch/mips/gt64120/wrppmc/reset.c b/arch/mips/gt64120/wrppmc/reset.c
index c355cff38f6c..cc5474b24f06 100644
--- a/arch/mips/gt64120/wrppmc/reset.c
+++ b/arch/mips/gt64120/wrppmc/reset.c
@@ -5,10 +5,12 @@
  *
  * Copyright (C) 1997 Ralf Baechle
  */
+#include <linux/irqflags.h>
 #include <linux/kernel.h>
 
 #include <asm/cacheflush.h>
 #include <asm/mipsregs.h>
+#include <asm/processor.h>
 
 void wrppmc_machine_restart(char *command)
 {
@@ -32,15 +34,7 @@ void wrppmc_machine_halt(void)
 
 	printk(KERN_NOTICE "You can safely turn off the power\n");
 	while (1) {
-		__asm__(
-			".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0"
-		);
+		if (cpu_wait)
+			cpu_wait();
 	}
 }
-
-void wrppmc_machine_power_off(void)
-{
-	wrppmc_machine_halt();
-}
diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c
index 728ef6a80edd..ca65c84031a7 100644
--- a/arch/mips/gt64120/wrppmc/setup.c
+++ b/arch/mips/gt64120/wrppmc/setup.c
@@ -98,11 +98,10 @@ void __init plat_mem_setup(void)
 {
 	extern void wrppmc_machine_restart(char *command);
 	extern void wrppmc_machine_halt(void);
-	extern void wrppmc_machine_power_off(void);
 
 	_machine_restart = wrppmc_machine_restart;
 	_machine_halt	 = wrppmc_machine_halt;
-	pm_power_off	 = wrppmc_machine_power_off;
+	pm_power_off	 = wrppmc_machine_halt;
 
 	/* This makes the operations of 'in/out[bwl]' to the
 	 * physical address ( < KSEG0) can work via KSEG1
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index a7947199c99b..f60524e8bc44 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -76,10 +76,8 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(JAZZ_PORT_BASE);
 #ifdef CONFIG_EISA
-	if (mips_machtype == MACH_MIPS_MAGNUM_4000)
-		EISA_bus = 1;
+	EISA_bus = 1;
 #endif
-	isa_slot_offset = 0xe3000000;
 
 	/* request I/O space for devices used on all i[345]86 PCs */
 	for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
diff --git a/arch/mips/jmr3927/common/Makefile b/arch/mips/jmr3927/common/Makefile
deleted file mode 100644
index 8fd4fcccf10e..000000000000
--- a/arch/mips/jmr3927/common/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the common code of TOSHIBA JMR-TX3927 board
-#
-
-obj-y	 += prom.o puts.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/jmr3927/common/puts.c b/arch/mips/jmr3927/common/puts.c
deleted file mode 100644
index c611ab497888..000000000000
--- a/arch/mips/jmr3927/common/puts.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ahennessy@mvista.com or source@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * Based on arch/mips/au1000/common/puts.c
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/jmr3927/tx3927.h>
-
-#define TIMEOUT       0xffffff
-
-void
-prom_putchar(char c)
-{
-        int i = 0;
-
-        do {
-            i++;
-            if (i>TIMEOUT)
-                break;
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = c;
-	return;
-}
-
-void
-puts(const char *cp)
-{
-    while (*cp)
-	prom_putchar(*cp++);
-    prom_putchar('\r');
-    prom_putchar('\n');
-}
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 65e46a6d4178..0fd31974ba28 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -20,9 +20,6 @@ obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
 
-binfmt_irix-objs	:= irixelf.o irixinv.o irixioctl.o irixsig.o	\
-			   irix5sys.o sysirix.o
-
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
 
@@ -63,14 +60,13 @@ obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
 obj-$(CONFIG_IRQ_CPU_RM9K)	+= irq-rm9000.o
-obj-$(CONFIG_MIPS_BOARDS_GEN)	+= irq-msc01.o
+obj-$(CONFIG_MIPS_MSC)		+= irq-msc01.o
 obj-$(CONFIG_IRQ_TXX9)		+= irq_txx9.o
 obj-$(CONFIG_IRQ_GT641XX)	+= irq-gt641xx.o
 obj-$(CONFIG_IRQ_GIC)		+= irq-gic.o
 
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
 obj-$(CONFIG_64BIT)		+= scall64-64.o
-obj-$(CONFIG_BINFMT_IRIX)	+= binfmt_irix.o
 obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c
index 9dccfa4752b2..9ae813eb782e 100644
--- a/arch/mips/kernel/early_printk.c
+++ b/arch/mips/kernel/early_printk.c
@@ -10,6 +10,8 @@
 #include <linux/console.h>
 #include <linux/init.h>
 
+#include <asm/setup.h>
+
 extern void prom_putchar(char);
 
 static void __init
diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c
index b1436a857998..c6854d9df926 100644
--- a/arch/mips/kernel/gpio_txx9.c
+++ b/arch/mips/kernel/gpio_txx9.c
@@ -47,23 +47,25 @@ static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset,
 
 static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset)
 {
-	spin_lock_irq(&txx9_gpio_lock);
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
 	__raw_writel(__raw_readl(&txx9_pioptr->dir) & ~(1 << offset),
 		     &txx9_pioptr->dir);
 	mmiowb();
-	spin_unlock_irq(&txx9_gpio_lock);
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
 	return 0;
 }
 
 static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset,
 			     int value)
 {
-	spin_lock_irq(&txx9_gpio_lock);
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
 	txx9_gpio_set_raw(offset, value);
 	__raw_writel(__raw_readl(&txx9_pioptr->dir) | (1 << offset),
 		     &txx9_pioptr->dir);
 	mmiowb();
-	spin_unlock_irq(&txx9_gpio_lock);
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
 	return 0;
 }
 
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 38fa1a194bf4..b6ac55162b9a 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -80,7 +80,7 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
  * registered. This mechanism replaces the previous #ifdef LOCAL_APIC -
  * !using_apic_timer decisions in do_timer_interrupt_hook()
  */
-struct clock_event_device pit_clockevent = {
+static struct clock_event_device pit_clockevent = {
 	.name		= "pit",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= init_pit_timer,
diff --git a/arch/mips/kernel/irix5sys.S b/arch/mips/kernel/irix5sys.S
deleted file mode 100644
index eeef891093ed..000000000000
--- a/arch/mips/kernel/irix5sys.S
+++ /dev/null
@@ -1,1041 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * 32-bit IRIX5 ABI system call table derived from original file 'irix5sys.h'
- * created by David S. Miller.
- *
- * Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 Steven J. Hill <sjhill@realitydiluted.com>
- */
-#include <asm/asm.h>
-
-	/*
-	 * Key:
-	 *         V == Valid and should work as expected for most cases.
-	 *        HV == Half Valid, some things will work, some likely will not
-	 *        IV == InValid, certainly will not work at all yet
-	 *        ?V == ?'ably Valid, I have not done enough looking into it
-	 *        DC == Don't Care, a rats ass we couldn't give
-	 */
-
-	.macro	irix5syscalltable
-
-	sys	sys_syscall	0	/* 1000  sysindir()	       V*/
-	sys	sys_exit	1	/* 1001  exit()		       V*/
-	sys	sys_fork	0	/* 1002  fork()		       V*/
-	sys	sys_read	3	/* 1003  read()		       V*/
-	sys	sys_write	3	/* 1004  write()	       V*/
-	sys	sys_open	3	/* 1005  open()		       V*/
-	sys	sys_close	1	/* 1006  close()	       V*/
-	sys	irix_unimp	0	/* 1007  (XXX IRIX 4 wait)     V*/
-	sys	sys_creat	2	/* 1008  creat()	       V*/
-	sys	sys_link	2	/* 1009  link()		       V*/
-	sys	sys_unlink	1	/* 1010  unlink()	       V*/
-	sys	irix_exec	0	/* 1011  exec()		       V*/
-	sys	sys_chdir	1	/* 1012  chdir()	       V*/
-	sys	irix_gtime	0	/* 1013  time()		       V*/
-	sys	irix_unimp	0	/* 1014  (XXX IRIX 4 mknod)    V*/
-	sys	sys_chmod	2	/* 1015  chmod()	       V*/
-	sys	sys_chown	3	/* 1016  chown()	       V*/
-	sys	irix_brk	1	/* 1017  break()	       V*/
-	sys	irix_unimp	0	/* 1018  (XXX IRIX 4 stat)     V*/
-	sys	sys_lseek	3	/* 1019  lseek()     XXX64bit HV*/
-	sys	irix_getpid	0	/* 1020  getpid()	       V*/
-	sys	irix_mount	6	/* 1021  mount()	      IV*/
-	sys	sys_umount	1	/* 1022  umount()	       V*/
-	sys	sys_setuid	1	/* 1023  setuid()	       V*/
-	sys	irix_getuid	0	/* 1024  getuid()	       V*/
-	sys	irix_stime	1	/* 1025  stime()	       V*/
-	sys	irix_unimp	4	/* 1026  XXX ptrace()	      IV*/
-	sys	irix_alarm	1	/* 1027  alarm()	       V*/
-	sys	irix_unimp	0	/* 1028  (XXX IRIX 4 fstat)    V*/
-	sys	irix_pause	0	/* 1029  pause()	       V*/
-	sys	sys_utime	2	/* 1030  utime()	       V*/
-	sys	irix_unimp	0	/* 1031  nuthin'	       V*/
-	sys	irix_unimp	0	/* 1032  nobody home man...    V*/
-	sys	sys_access	2	/* 1033  access()	       V*/
-	sys	sys_nice	1	/* 1034  nice()		       V*/
-	sys	irix_statfs	2	/* 1035  statfs()	       V*/
-	sys	sys_sync	0	/* 1036  sync()		       V*/
-	sys	sys_kill	2	/* 1037  kill()		       V*/
-	sys	irix_fstatfs	2	/* 1038  fstatfs()	       V*/
-	sys	irix_setpgrp	1	/* 1039  setpgrp()	       V*/
-	sys	irix_syssgi	0	/* 1040  syssgi()	      HV*/
-	sys	sys_dup		1	/* 1041  dup()		       V*/
-	sys	sys_pipe	0	/* 1042  pipe()		       V*/
-	sys	irix_times	1	/* 1043  times()	       V*/
-	sys	irix_unimp	0	/* 1044  XXX profil()	      IV*/
-	sys	irix_unimp	0	/* 1045  XXX lock()	      IV*/
-	sys	sys_setgid	1	/* 1046  setgid()	       V*/
-	sys	irix_getgid	0	/* 1047  getgid()	       V*/
-	sys	irix_unimp	0	/* 1048  (XXX IRIX 4 ssig)     V*/
-	sys	irix_msgsys	6	/* 1049  sys_msgsys	       V*/
-	sys	sys_sysmips	4	/* 1050  sysmips()	      HV*/
-	sys	irix_unimp	0	/* 1051	 XXX sysacct()	      IV*/
-	sys	irix_shmsys	5	/* 1052  sys_shmsys	       V*/
-	sys	irix_semsys	0	/* 1053  sys_semsys	       V*/
-	sys	irix_ioctl	3	/* 1054  ioctl()	      HV*/
-	sys	irix_uadmin	0	/* 1055  XXX sys_uadmin()     HC*/
-	sys	irix_sysmp	0	/* 1056  sysmp()	      HV*/
-	sys	irix_utssys	4	/* 1057  sys_utssys()	      HV*/
-	sys	irix_unimp	0	/* 1058  nada enchilada	       V*/
-	sys	irix_exece	0	/* 1059  exece()	       V*/
-	sys	sys_umask	1	/* 1060  umask()	       V*/
-	sys	sys_chroot	1	/* 1061  chroot()	       V*/
-	sys	irix_fcntl	3	/* 1062  fcntl()	      ?V*/
-	sys	irix_ulimit	2	/* 1063  ulimit()	      HV*/
-	sys	irix_unimp	0	/* 1064  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1065  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1066  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1067  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1068  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1069  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1070  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1071  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1072  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1073  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1074  nuttin'	       V*/
-	sys	irix_unimp	0	/* 1075  XXX sys_getrlimit64()IV*/
-	sys	irix_unimp	0	/* 1076  XXX sys_setrlimit64()IV*/
-	sys	sys_nanosleep	2	/* 1077  nanosleep()	       V*/
-	sys	irix_lseek64	5	/* 1078  lseek64()	      ?V*/
-	sys	sys_rmdir	1	/* 1079  rmdir()	       V*/
-	sys	sys_mkdir	2	/* 1080  mkdir()	       V*/
-	sys	sys_getdents	3	/* 1081  getdents()	       V*/
-	sys	irix_sginap	1	/* 1082  sys_sginap()	       V*/
-	sys	irix_sgikopt	3	/* 1083  sys_sgikopt()	      DC*/
-	sys	sys_sysfs	3	/* 1084  sysfs()	      ?V*/
-	sys	irix_unimp	0	/* 1085  XXX sys_getmsg()     DC*/
-	sys	irix_unimp	0	/* 1086  XXX sys_putmsg()     DC*/
-	sys	sys_poll	3	/* 1087  poll()	               V*/
-	sys	irix_sigreturn	0	/* 1088  sigreturn()	      ?V*/
-	sys	sys_accept	3	/* 1089  accept()	       V*/
-	sys	sys_bind	3	/* 1090  bind()		       V*/
-	sys	sys_connect	3	/* 1091  connect()	       V*/
-	sys	irix_gethostid	0	/* 1092  sys_gethostid()      ?V*/
-	sys	sys_getpeername	3	/* 1093  getpeername()	       V*/
-	sys	sys_getsockname	3	/* 1094  getsockname()	       V*/
-	sys	sys_getsockopt	5	/* 1095  getsockopt()	       V*/
-	sys	sys_listen	2	/* 1096  listen()	       V*/
-	sys	sys_recv	4	/* 1097  recv()		       V*/
-	sys	sys_recvfrom	6	/* 1098  recvfrom()	       V*/
-	sys	sys_recvmsg	3	/* 1099  recvmsg()	       V*/
-	sys	sys_select	5	/* 1100  select()	       V*/
-	sys	sys_send	4	/* 1101  send()		       V*/
-	sys	sys_sendmsg	3	/* 1102  sendmsg()	       V*/
-	sys	sys_sendto	6	/* 1103  sendto()	       V*/
-	sys	irix_sethostid	1	/* 1104  sys_sethostid()      ?V*/
-	sys	sys_setsockopt	5	/* 1105  setsockopt()	       V*/
-	sys	sys_shutdown	2	/* 1106  shutdown()	      ?V*/
-	sys	irix_socket	3	/* 1107  socket()	       V*/
-	sys	sys_gethostname	2	/* 1108  sys_gethostname()    ?V*/
-	sys	sys_sethostname	2	/* 1109  sethostname()	      ?V*/
-	sys	irix_getdomainname 2	/* 1110  sys_getdomainname()  ?V*/
-	sys	sys_setdomainname 2	/* 1111  setdomainname()      ?V*/
-	sys	sys_truncate	2	/* 1112  truncate()	       V*/
-	sys	sys_ftruncate	2	/* 1113  ftruncate()	       V*/
-	sys	sys_rename	2	/* 1114  rename()	       V*/
-	sys	sys_symlink	2	/* 1115  symlink()	       V*/
-	sys	sys_readlink	3	/* 1116  readlink()	       V*/
-	sys	irix_unimp	0	/* 1117  XXX IRIX 4 lstat()   DC*/
-	sys	irix_unimp	0	/* 1118  nothin'	       V*/
-	sys	irix_unimp	0	/* 1119  XXX nfs_svc()	      DC*/
-	sys	irix_unimp	0	/* 1120  XXX nfs_getfh()      DC*/
-	sys	irix_unimp	0	/* 1121  XXX async_daemon()   DC*/
-	sys	irix_unimp	0	/* 1122  XXX exportfs()	      DC*/
-	sys	sys_setregid	2	/* 1123  setregid()	       V*/
-	sys	sys_setreuid	2	/* 1124  setreuid()	       V*/
-	sys	sys_getitimer	2	/* 1125  getitimer()	       V*/
-	sys	sys_setitimer	3	/* 1126  setitimer()	       V*/
-	sys	irix_unimp	1	/* 1127  XXX adjtime() 	      IV*/
-	sys	irix_gettimeofday 1	/* 1128  gettimeofday()	       V*/
-	sys	irix_unimp	0	/* 1129  XXX sproc()	      IV*/
-	sys	irix_prctl	0	/* 1130  prctl()	      HV*/
-	sys	irix_unimp	0	/* 1131  XXX procblk()	      IV*/
-	sys	irix_unimp	0	/* 1132  XXX sprocsp()	      IV*/
-	sys	irix_unimp	0	/* 1133  XXX sgigsc()	      IV*/
-	sys	irix_mmap32	6	/* 1134  mmap()	   XXXflags?  ?V*/
-	sys	sys_munmap	2	/* 1135  munmap()	       V*/
-	sys	sys_mprotect	3	/* 1136  mprotect()	       V*/
-	sys	sys_msync	4	/* 1137  msync()	       V*/
-	sys	irix_madvise	3	/* 1138  madvise()	      DC*/
-	sys	irix_pagelock	3	/* 1139  pagelock()	      IV*/
-	sys	irix_getpagesize 0	/* 1140  getpagesize()         V*/
-	sys	irix_quotactl	0	/* 1141  quotactl()	       V*/
-	sys	irix_unimp	0	/* 1142  nobody home man       V*/
-	sys	sys_getpgid	1	/* 1143  BSD getpgrp()	       V*/
-	sys	irix_BSDsetpgrp 2	/* 1143  BSD setpgrp()	       V*/
-	sys	sys_vhangup	0	/* 1144  vhangup()	       V*/
-	sys	sys_fsync	1	/* 1145  fsync()	       V*/
-	sys	sys_fchdir	1	/* 1146  fchdir()	       V*/
-	sys	sys_getrlimit	2	/* 1147  getrlimit()	      ?V*/
-	sys	sys_setrlimit	2	/* 1148  setrlimit()	      ?V*/
-	sys	sys_cacheflush	3	/* 1150  cacheflush()	      HV*/
-	sys	sys_cachectl	3	/* 1151  cachectl()	      HV*/
-	sys	sys_fchown	3	/* 1152  fchown()	      ?V*/
-	sys	sys_fchmod	2	/* 1153  fchmod()	      ?V*/
-	sys	irix_unimp	0	/* 1154  XXX IRIX 4 wait3()    V*/
-	sys	sys_socketpair	4	/* 1155  socketpair()	       V*/
-	sys	irix_systeminfo	3	/* 1156  systeminfo()	      IV*/
-	sys	irix_uname	1	/* 1157  uname()	      IV*/
-	sys	irix_xstat	3	/* 1158  xstat()	       V*/
-	sys	irix_lxstat	3	/* 1159  lxstat()	       V*/
-	sys	irix_fxstat	3	/* 1160  fxstat()	       V*/
-	sys	irix_xmknod	0	/* 1161  xmknod()	      ?V*/
-	sys	irix_sigaction	4	/* 1162  sigaction()	      ?V*/
-	sys	irix_sigpending	1	/* 1163  sigpending()	      ?V*/
-	sys	irix_sigprocmask 3	/* 1164  sigprocmask()	      ?V*/
-	sys	irix_sigsuspend	0	/* 1165  sigsuspend()	      ?V*/
-	sys	irix_sigpoll_sys 3	/* 1166  sigpoll_sys()	      IV*/
-	sys	irix_swapctl	2	/* 1167  swapctl()	      IV*/
-	sys	irix_getcontext	0	/* 1168  getcontext()	      HV*/
-	sys	irix_setcontext	0	/* 1169  setcontext()	      HV*/
-	sys	irix_waitsys	5	/* 1170  waitsys()	      IV*/
-	sys	irix_sigstack	2	/* 1171  sigstack()	      HV*/
-	sys	irix_sigaltstack 2	/* 1172  sigaltstack()	      HV*/
-	sys	irix_sigsendset	2	/* 1173  sigsendset()	      IV*/
-	sys	irix_statvfs	2	/* 1174  statvfs()	       V*/
-	sys	irix_fstatvfs	2	/* 1175  fstatvfs()	       V*/
-	sys	irix_unimp	0	/* 1176  XXX getpmsg()	      DC*/
-	sys	irix_unimp	0	/* 1177  XXX putpmsg()	      DC*/
-	sys	sys_lchown	3	/* 1178  lchown()	       V*/
-	sys	irix_priocntl	0	/* 1179  priocntl()	      DC*/
-	sys	irix_sigqueue	4	/* 1180  sigqueue()	      IV*/
-	sys	sys_readv	3	/* 1181  readv()	       V*/
-	sys	sys_writev	3	/* 1182  writev()	       V*/
-	sys	irix_truncate64 4	/* 1183  truncate64() XX32bit HV*/
-	sys	irix_ftruncate64 4	/* 1184  ftruncate64()XX32bit HV*/
-	sys	irix_mmap64	0	/* 1185  mmap64()     XX32bit HV*/
-	sys	irix_dmi	0	/* 1186  dmi()		      DC*/
-	sys	irix_pread	6	/* 1187  pread()	      IV*/
-	sys	irix_pwrite	6	/* 1188  pwrite()	      IV*/
-	sys	sys_fsync	1	/* 1189  fdatasync()  XXPOSIX HV*/
-	sys	irix_sgifastpath 7	/* 1190  sgifastpath() WHEEE  IV*/
-	sys	irix_unimp	0	/* 1191  XXX attr_get()	      DC*/
-	sys	irix_unimp	0	/* 1192  XXX attr_getf()      DC*/
-	sys	irix_unimp	0	/* 1193  XXX attr_set()	      DC*/
-	sys	irix_unimp	0	/* 1194  XXX attr_setf()      DC*/
-	sys	irix_unimp	0	/* 1195  XXX attr_remove()    DC*/
-	sys	irix_unimp	0	/* 1196  XXX attr_removef()   DC*/
-	sys	irix_unimp	0	/* 1197  XXX attr_list()      DC*/
-	sys	irix_unimp	0	/* 1198  XXX attr_listf()     DC*/
-	sys	irix_unimp	0	/* 1199  XXX attr_multi()     DC*/
-	sys	irix_unimp	0	/* 1200  XXX attr_multif()    DC*/
-	sys	irix_statvfs64	2	/* 1201  statvfs64()	       V*/
-	sys	irix_fstatvfs64	2	/* 1202  fstatvfs64()	       V*/
-	sys	irix_getmountid	2	/* 1203  getmountid()XXXfsids HV*/
-	sys	irix_nsproc	5	/* 1204  nsproc()	      IV*/
-	sys	irix_getdents64 3	/* 1205  getdents64()	      HV*/
-	sys	irix_unimp	0	/* 1206  XXX DFS garbage      DC*/
-	sys	irix_ngetdents	4	/* 1207  ngetdents() XXXeop   HV*/
-	sys	irix_ngetdents64 4	/* 1208  ngetdents64() XXXeop HV*/
-	sys	irix_unimp	0	/* 1209  nothin'	       V*/
-	sys	irix_unimp	0	/* 1210  XXX pidsprocsp()	*/
-	sys	irix_unimp	0	/* 1211  XXX rexec()		*/
-	sys	irix_unimp	0	/* 1212  XXX timer_create()	*/
-	sys	irix_unimp	0	/* 1213  XXX timer_delete()	*/
-	sys	irix_unimp	0	/* 1214  XXX timer_settime()	*/
-	sys	irix_unimp	0	/* 1215  XXX timer_gettime()	*/
-	sys	irix_unimp	0	/* 1216  XXX timer_setoverrun()	*/
-	sys	sys_sched_rr_get_interval 2		/* 1217  sched_rr_get_interval()V*/
-	sys	sys_sched_yield	0	/* 1218  sched_yield()	       V*/
-	sys	sys_sched_getscheduler 1 /* 1219  sched_getscheduler()  V*/
-	sys	sys_sched_setscheduler 3 /* 1220  sched_setscheduler()  V*/
-	sys	sys_sched_getparam 2	/* 1221  sched_getparam()      V*/
-	sys	sys_sched_setparam 2	/* 1222  sched_setparam()      V*/
-	sys	irix_unimp	0	/* 1223  XXX usync_cntl()	*/
-	sys	irix_unimp	0	/* 1224  XXX psema_cntl()	*/
-	sys	irix_unimp	0	/* 1225  XXX restartreturn()	*/
-
-	/* Just to pad things out nicely. */
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-
-	.endm
-
-	/*
-	 * Pre-compute the number of _instruction_ bytes needed to load
-	 * or store the arguments 6-8. Negative values are ignored.
-	 */
-	.macro  sys function, nargs
-	PTR	\function
-	LONG	(\nargs << 2) - (5 << 2)
-	.endm
-
-	.align	4
-EXPORT(sys_call_table_irix5)
-	irix5syscalltable
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
deleted file mode 100644
index 469c7237e5ba..000000000000
--- a/arch/mips/kernel/irixelf.c
+++ /dev/null
@@ -1,1361 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * irixelf.c: Code to load IRIX ELF executables conforming to the MIPS ABI.
- *            Based off of work by Eric Youngdale.
- *
- * Copyright (C) 1993 - 1994 Eric Youngdale <ericy@cais.com>
- * Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 - 2005 Steven J. Hill <sjhill@realitydiluted.com>
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/stat.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/mman.h>
-#include <linux/a.out.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/signal.h>
-#include <linux/binfmts.h>
-#include <linux/string.h>
-#include <linux/file.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/shm.h>
-#include <linux/personality.h>
-#include <linux/elfcore.h>
-
-#include <asm/mipsregs.h>
-#include <asm/namei.h>
-#include <asm/prctl.h>
-#include <asm/uaccess.h>
-
-#define DLINFO_ITEMS 12
-
-#include <linux/elf.h>
-
-static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs);
-static int load_irix_library(struct file *);
-static int irix_core_dump(long signr, struct pt_regs * regs,
-                          struct file *file, unsigned long limit);
-
-static struct linux_binfmt irix_format = {
-	.module		= THIS_MODULE,
-	.load_binary	= load_irix_binary,
-	.load_shlib	= load_irix_library,
-	.core_dump	= irix_core_dump,
-	.min_coredump	= PAGE_SIZE,
-};
-
-/* Debugging routines. */
-static char *get_elf_p_type(Elf32_Word p_type)
-{
-#ifdef DEBUG
-	switch (p_type) {
-	case PT_NULL:
-		return "PT_NULL";
-		break;
-
-	case PT_LOAD:
-		return "PT_LOAD";
-		break;
-
-	case PT_DYNAMIC:
-		return "PT_DYNAMIC";
-		break;
-
-	case PT_INTERP:
-		return "PT_INTERP";
-		break;
-
-	case PT_NOTE:
-		return "PT_NOTE";
-		break;
-
-	case PT_SHLIB:
-		return "PT_SHLIB";
-		break;
-
-	case PT_PHDR:
-		return "PT_PHDR";
-		break;
-
-	case PT_LOPROC:
-		return "PT_LOPROC/REGINFO";
-		break;
-
-	case PT_HIPROC:
-		return "PT_HIPROC";
-		break;
-
-	default:
-		return "PT_BOGUS";
-		break;
-	}
-#endif
-}
-
-static void print_elfhdr(struct elfhdr *ehp)
-{
-	int i;
-
-	pr_debug("ELFHDR: e_ident<");
-	for (i = 0; i < (EI_NIDENT - 1); i++)
-		pr_debug("%x ", ehp->e_ident[i]);
-	pr_debug("%x>\n", ehp->e_ident[i]);
-	pr_debug("        e_type[%04x] e_machine[%04x] e_version[%08lx]\n",
-	         (unsigned short) ehp->e_type, (unsigned short) ehp->e_machine,
-	         (unsigned long) ehp->e_version);
-	pr_debug("        e_entry[%08lx] e_phoff[%08lx] e_shoff[%08lx] "
-	         "e_flags[%08lx]\n",
-	         (unsigned long) ehp->e_entry, (unsigned long) ehp->e_phoff,
-	         (unsigned long) ehp->e_shoff, (unsigned long) ehp->e_flags);
-	pr_debug("        e_ehsize[%04x] e_phentsize[%04x] e_phnum[%04x]\n",
-	         (unsigned short) ehp->e_ehsize,
-	         (unsigned short) ehp->e_phentsize,
-	         (unsigned short) ehp->e_phnum);
-	pr_debug("        e_shentsize[%04x] e_shnum[%04x] e_shstrndx[%04x]\n",
-	         (unsigned short) ehp->e_shentsize,
-	         (unsigned short) ehp->e_shnum,
-	         (unsigned short) ehp->e_shstrndx);
-}
-
-static void print_phdr(int i, struct elf_phdr *ep)
-{
-	pr_debug("PHDR[%d]: p_type[%s] p_offset[%08lx] p_vaddr[%08lx] "
-	         "p_paddr[%08lx]\n", i, get_elf_p_type(ep->p_type),
-	         (unsigned long) ep->p_offset, (unsigned long) ep->p_vaddr,
-	         (unsigned long) ep->p_paddr);
-	pr_debug("         p_filesz[%08lx] p_memsz[%08lx] p_flags[%08lx] "
-	         "p_align[%08lx]\n", (unsigned long) ep->p_filesz,
-	         (unsigned long) ep->p_memsz, (unsigned long) ep->p_flags,
-	         (unsigned long) ep->p_align);
-}
-
-static void dump_phdrs(struct elf_phdr *ep, int pnum)
-{
-	int i;
-
-	for (i = 0; i < pnum; i++, ep++) {
-		if ((ep->p_type == PT_LOAD) ||
-		    (ep->p_type == PT_INTERP) ||
-		    (ep->p_type == PT_PHDR))
-			print_phdr(i, ep);
-	}
-}
-
-static void set_brk(unsigned long start, unsigned long end)
-{
-	start = PAGE_ALIGN(start);
-	end = PAGE_ALIGN(end);
-	if (end <= start)
-		return;
-	down_write(&current->mm->mmap_sem);
-	do_brk(start, end - start);
-	up_write(&current->mm->mmap_sem);
-}
-
-
-/* We need to explicitly zero any fractional pages
- * after the data section (i.e. bss).  This would
- * contain the junk from the file that should not
- * be in memory.
- */
-static void padzero(unsigned long elf_bss)
-{
-	unsigned long nbyte;
-
-	nbyte = elf_bss & (PAGE_SIZE-1);
-	if (nbyte) {
-		nbyte = PAGE_SIZE - nbyte;
-		clear_user((void __user *) elf_bss, nbyte);
-	}
-}
-
-static unsigned long * create_irix_tables(char * p, int argc, int envc,
-	struct elfhdr * exec, unsigned int load_addr,
-	unsigned int interp_load_addr, struct pt_regs *regs,
-	struct elf_phdr *ephdr)
-{
-	elf_addr_t *argv;
-	elf_addr_t *envp;
-	elf_addr_t *sp, *csp;
-
-	pr_debug("create_irix_tables: p[%p] argc[%d] envc[%d] "
-	         "load_addr[%08x] interp_load_addr[%08x]\n",
-	         p, argc, envc, load_addr, interp_load_addr);
-
-	sp = (elf_addr_t *) (~15UL & (unsigned long) p);
-	csp = sp;
-	csp -= exec ? DLINFO_ITEMS*2 : 2;
-	csp -= envc+1;
-	csp -= argc+1;
-	csp -= 1;		/* argc itself */
-	if ((unsigned long)csp & 15UL) {
-		sp -= (16UL - ((unsigned long)csp & 15UL)) / sizeof(*sp);
-	}
-
-	/*
-	 * Put the ELF interpreter info on the stack
-	 */
-#define NEW_AUX_ENT(nr, id, val) \
-	  __put_user((id), sp+(nr*2)); \
-	  __put_user((val), sp+(nr*2+1)); \
-
-	sp -= 2;
-	NEW_AUX_ENT(0, AT_NULL, 0);
-
-	if (exec) {
-		sp -= 11*2;
-
-		NEW_AUX_ENT(0, AT_PHDR, load_addr + exec->e_phoff);
-		NEW_AUX_ENT(1, AT_PHENT, sizeof(struct elf_phdr));
-		NEW_AUX_ENT(2, AT_PHNUM, exec->e_phnum);
-		NEW_AUX_ENT(3, AT_PAGESZ, ELF_EXEC_PAGESIZE);
-		NEW_AUX_ENT(4, AT_BASE, interp_load_addr);
-		NEW_AUX_ENT(5, AT_FLAGS, 0);
-		NEW_AUX_ENT(6, AT_ENTRY, (elf_addr_t) exec->e_entry);
-		NEW_AUX_ENT(7, AT_UID, (elf_addr_t) current->uid);
-		NEW_AUX_ENT(8, AT_EUID, (elf_addr_t) current->euid);
-		NEW_AUX_ENT(9, AT_GID, (elf_addr_t) current->gid);
-		NEW_AUX_ENT(10, AT_EGID, (elf_addr_t) current->egid);
-	}
-#undef NEW_AUX_ENT
-
-	sp -= envc+1;
-	envp = sp;
-	sp -= argc+1;
-	argv = sp;
-
-	__put_user((elf_addr_t)argc, --sp);
-	current->mm->arg_start = (unsigned long) p;
-	while (argc-->0) {
-		__put_user((unsigned long)p, argv++);
-		p += strlen_user(p);
-	}
-	__put_user((unsigned long) NULL, argv);
-	current->mm->arg_end = current->mm->env_start = (unsigned long) p;
-	while (envc-->0) {
-		__put_user((unsigned long)p, envp++);
-		p += strlen_user(p);
-	}
-	__put_user((unsigned long) NULL, envp);
-	current->mm->env_end = (unsigned long) p;
-	return sp;
-}
-
-
-/* This is much more generalized than the library routine read function,
- * so we keep this separate.  Technically the library read function
- * is only provided so that we can read a.out libraries that have
- * an ELF header.
- */
-static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
-				     struct file * interpreter,
-				     unsigned int *interp_load_addr)
-{
-	struct elf_phdr *elf_phdata  =  NULL;
-	struct elf_phdr *eppnt;
-	unsigned int len;
-	unsigned int load_addr;
-	int elf_bss;
-	int retval;
-	unsigned int last_bss;
-	int error;
-	int i;
-	unsigned int k;
-
-	elf_bss = 0;
-	last_bss = 0;
-	error = load_addr = 0;
-
-	print_elfhdr(interp_elf_ex);
-
-	/* First of all, some simple consistency checks */
-	if ((interp_elf_ex->e_type != ET_EXEC &&
-	     interp_elf_ex->e_type != ET_DYN) ||
-	     !interpreter->f_op->mmap) {
-		printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type);
-		return 0xffffffff;
-	}
-
-	/* Now read in all of the header information */
-	if (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum > PAGE_SIZE) {
-	    printk("IRIX interp header bigger than a page (%d)\n",
-		   (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum));
-	    return 0xffffffff;
-	}
-
-	elf_phdata = kmalloc(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum,
-			     GFP_KERNEL);
-
-	if (!elf_phdata) {
-		printk("Cannot kmalloc phdata for IRIX interp.\n");
-		return 0xffffffff;
-	}
-
-	/* If the size of this structure has changed, then punt, since
-	 * we will be doing the wrong thing.
-	 */
-	if (interp_elf_ex->e_phentsize != 32) {
-		printk("IRIX interp e_phentsize == %d != 32 ",
-		       interp_elf_ex->e_phentsize);
-		kfree(elf_phdata);
-		return 0xffffffff;
-	}
-
-	retval = kernel_read(interpreter, interp_elf_ex->e_phoff,
-			   (char *) elf_phdata,
-			   sizeof(struct elf_phdr) * interp_elf_ex->e_phnum);
-
-	dump_phdrs(elf_phdata, interp_elf_ex->e_phnum);
-
-	eppnt = elf_phdata;
-	for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) {
-		if (eppnt->p_type == PT_LOAD) {
-			int elf_type = MAP_PRIVATE | MAP_DENYWRITE;
-			int elf_prot = 0;
-			unsigned long vaddr = 0;
-			if (eppnt->p_flags & PF_R)
-				elf_prot =  PROT_READ;
-			if (eppnt->p_flags & PF_W)
-				elf_prot |= PROT_WRITE;
-			if (eppnt->p_flags & PF_X)
-				elf_prot |= PROT_EXEC;
-			elf_type |= MAP_FIXED;
-			vaddr = eppnt->p_vaddr;
-
-			pr_debug("INTERP do_mmap"
-			         "(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
-			         interpreter, vaddr,
-			         (unsigned long)
-			         (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)),
-			         (unsigned long)
-			         elf_prot, (unsigned long) elf_type,
-			         (unsigned long)
-			         (eppnt->p_offset & 0xfffff000));
-
-			down_write(&current->mm->mmap_sem);
-			error = do_mmap(interpreter, vaddr,
-			eppnt->p_filesz + (eppnt->p_vaddr & 0xfff),
-			elf_prot, elf_type,
-			eppnt->p_offset & 0xfffff000);
-			up_write(&current->mm->mmap_sem);
-
-			if (error < 0 && error > -1024) {
-				printk("Aieee IRIX interp mmap error=%d\n",
-				       error);
-				break;  /* Real error */
-			}
-			pr_debug("error=%08lx ", (unsigned long) error);
-			if (!load_addr && interp_elf_ex->e_type == ET_DYN) {
-				load_addr = error;
-				pr_debug("load_addr = error ");
-			}
-
-			/*
-			 * Find the end of the file  mapping for this phdr, and
-			 * keep track of the largest address we see for this.
-			 */
-			k = eppnt->p_vaddr + eppnt->p_filesz;
-			if (k > elf_bss)
-				elf_bss = k;
-
-			/* Do the same thing for the memory mapping - between
-			 * elf_bss and last_bss is the bss section.
-			 */
-			k = eppnt->p_memsz + eppnt->p_vaddr;
-			if (k > last_bss)
-				last_bss = k;
-			pr_debug("\n");
-		}
-	}
-
-	/* Now use mmap to map the library into memory. */
-	if (error < 0 && error > -1024) {
-		pr_debug("got error %d\n", error);
-		kfree(elf_phdata);
-		return 0xffffffff;
-	}
-
-	/* Now fill out the bss section.  First pad the last page up
-	 * to the page boundary, and then perform a mmap to make sure
-	 * that there are zero-mapped pages up to and including the
-	 * last bss page.
-	 */
-	pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss));
-	padzero(elf_bss);
-	len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */
-
-	pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
-	         (unsigned long) len);
-
-	/* Map the last of the bss segment */
-	if (last_bss > len) {
-		down_write(&current->mm->mmap_sem);
-		do_brk(len, (last_bss - len));
-		up_write(&current->mm->mmap_sem);
-	}
-	kfree(elf_phdata);
-
-	*interp_load_addr = load_addr;
-	return ((unsigned int) interp_elf_ex->e_entry);
-}
-
-/* Check sanity of IRIX elf executable header. */
-static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm)
-{
-	if (memcmp(ehp->e_ident, ELFMAG, SELFMAG) != 0)
-		return -ENOEXEC;
-
-	/* First of all, some simple consistency checks */
-	if ((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) ||
-	    !bprm->file->f_op->mmap) {
-		return -ENOEXEC;
-	}
-
-	/* XXX Don't support N32 or 64bit binaries yet because they can
-	 * XXX and do execute 64 bit instructions and expect all registers
-	 * XXX to be 64 bit as well.  We need to make the kernel save
-	 * XXX all registers as 64bits on cpu's capable of this at
-	 * XXX exception time plus frob the XTLB exception vector.
-	 */
-	if ((ehp->e_flags & EF_MIPS_ABI2))
-		return -ENOEXEC;
-
-	return 0;
-}
-
-/*
- * This is where the detailed check is performed. Irix binaries
- * use interpreters with 'libc.so' in the name, so this function
- * can differentiate between Linux and Irix binaries.
- */
-static inline int look_for_irix_interpreter(char **name,
-					    struct file **interpreter,
-					    struct elfhdr *interp_elf_ex,
-					    struct elf_phdr *epp,
-					    struct linux_binprm *bprm, int pnum)
-{
-	int i;
-	int retval = -EINVAL;
-	struct file *file = NULL;
-
-	*name = NULL;
-	for (i = 0; i < pnum; i++, epp++) {
-		if (epp->p_type != PT_INTERP)
-			continue;
-
-		/* It is illegal to have two interpreters for one executable. */
-		if (*name != NULL)
-			goto out;
-
-		*name = kmalloc(epp->p_filesz + strlen(IRIX_EMUL), GFP_KERNEL);
-		if (!*name)
-			return -ENOMEM;
-
-		strcpy(*name, IRIX_EMUL);
-		retval = kernel_read(bprm->file, epp->p_offset, (*name + 16),
-		                     epp->p_filesz);
-		if (retval < 0)
-			goto out;
-
-		file = open_exec(*name);
-		if (IS_ERR(file)) {
-			retval = PTR_ERR(file);
-			goto out;
-		}
-		retval = kernel_read(file, 0, bprm->buf, 128);
-		if (retval < 0)
-			goto dput_and_out;
-
-		*interp_elf_ex = *(struct elfhdr *) bprm->buf;
-	}
-	*interpreter = file;
-	return 0;
-
-dput_and_out:
-	fput(file);
-out:
-	kfree(*name);
-	return retval;
-}
-
-static inline int verify_irix_interpreter(struct elfhdr *ihp)
-{
-	if (memcmp(ihp->e_ident, ELFMAG, SELFMAG) != 0)
-		return -ELIBBAD;
-	return 0;
-}
-
-#define EXEC_MAP_FLAGS (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE)
-
-static inline void map_executable(struct file *fp, struct elf_phdr *epp, int pnum,
-				  unsigned int *estack, unsigned int *laddr,
-				  unsigned int *scode, unsigned int *ebss,
-				  unsigned int *ecode, unsigned int *edata,
-				  unsigned int *ebrk)
-{
-	unsigned int tmp;
-	int i, prot;
-
-	for (i = 0; i < pnum; i++, epp++) {
-		if (epp->p_type != PT_LOAD)
-			continue;
-
-		/* Map it. */
-		prot  = (epp->p_flags & PF_R) ? PROT_READ : 0;
-		prot |= (epp->p_flags & PF_W) ? PROT_WRITE : 0;
-		prot |= (epp->p_flags & PF_X) ? PROT_EXEC : 0;
-	        down_write(&current->mm->mmap_sem);
-		(void) do_mmap(fp, (epp->p_vaddr & 0xfffff000),
-			       (epp->p_filesz + (epp->p_vaddr & 0xfff)),
-			       prot, EXEC_MAP_FLAGS,
-			       (epp->p_offset & 0xfffff000));
-	        up_write(&current->mm->mmap_sem);
-
-		/* Fixup location tracking vars. */
-		if ((epp->p_vaddr & 0xfffff000) < *estack)
-			*estack = (epp->p_vaddr & 0xfffff000);
-		if (!*laddr)
-			*laddr = epp->p_vaddr - epp->p_offset;
-		if (epp->p_vaddr < *scode)
-			*scode = epp->p_vaddr;
-
-		tmp = epp->p_vaddr + epp->p_filesz;
-		if (tmp > *ebss)
-			*ebss = tmp;
-		if ((epp->p_flags & PF_X) && *ecode < tmp)
-			*ecode = tmp;
-		if (*edata < tmp)
-			*edata = tmp;
-
-		tmp = epp->p_vaddr + epp->p_memsz;
-		if (tmp > *ebrk)
-			*ebrk = tmp;
-	}
-
-}
-
-static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp,
-				  struct file *interp, unsigned int *iladdr,
-				  int pnum, mm_segment_t old_fs,
-				  unsigned int *eentry)
-{
-	int i;
-
-	*eentry = 0xffffffff;
-	for (i = 0; i < pnum; i++, epp++) {
-		if (epp->p_type != PT_INTERP)
-			continue;
-
-		/* We should have fielded this error elsewhere... */
-		if (*eentry != 0xffffffff)
-			return -1;
-
-		set_fs(old_fs);
-		*eentry = load_irix_interp(ihp, interp, iladdr);
-		old_fs = get_fs();
-		set_fs(get_ds());
-
-		fput(interp);
-
-		if (*eentry == 0xffffffff)
-			return -1;
-	}
-	return 0;
-}
-
-/*
- * IRIX maps a page at 0x200000 that holds information about the
- * process and the system, here we map the page and fill the
- * structure
- */
-static int irix_map_prda_page(void)
-{
-	unsigned long v;
-	struct prda *pp;
-
-	down_write(&current->mm->mmap_sem);
-	v =  do_brk(PRDA_ADDRESS, PAGE_SIZE);
-	up_write(&current->mm->mmap_sem);
-
-	if (v != PRDA_ADDRESS)
-		return v;		/* v must be an error code */
-
-	pp = (struct prda *) v;
-	pp->prda_sys.t_pid  = task_pid_vnr(current);
-	pp->prda_sys.t_prid = read_c0_prid();
-	pp->prda_sys.t_rpid = task_pid_vnr(current);
-
-	/* We leave the rest set to zero */
-
-	return 0;
-}
-
-
-
-/* These are the functions used to load ELF style executables and shared
- * libraries.  There is no binary dependent code anywhere else.
- */
-static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
-{
-	struct elfhdr elf_ex, interp_elf_ex;
-	struct file *interpreter;
-	struct elf_phdr *elf_phdata, *elf_ihdr, *elf_ephdr;
-	unsigned int load_addr, elf_bss, elf_brk;
-	unsigned int elf_entry, interp_load_addr = 0;
-	unsigned int start_code, end_code, end_data, elf_stack;
-	int retval, has_interp, has_ephdr, size, i;
-	char *elf_interpreter;
-	mm_segment_t old_fs;
-
-	load_addr = 0;
-	has_interp = has_ephdr = 0;
-	elf_ihdr = elf_ephdr = NULL;
-	elf_ex = *((struct elfhdr *) bprm->buf);
-	retval = -ENOEXEC;
-
-	if (verify_binary(&elf_ex, bprm))
-		goto out;
-
-	/*
-	 * Telling -o32 static binaries from Linux and Irix apart from each
-	 * other is difficult. There are 2 differences to be noted for static
-	 * binaries from the 2 operating systems:
-	 *
-	 *    1) Irix binaries have their .text section before their .init
-	 *       section. Linux binaries are just the opposite.
-	 *
-	 *    2) Irix binaries usually have <= 12 sections and Linux
-	 *       binaries have > 20.
-	 *
-	 * We will use Method #2 since Method #1 would require us to read in
-	 * the section headers which is way too much overhead. This appears
-	 * to work for everything we have ran into so far. If anyone has a
-	 * better method to tell the binaries apart, I'm listening.
-	 */
-	if (elf_ex.e_shnum > 20)
-		goto out;
-
-	print_elfhdr(&elf_ex);
-
-	/* Now read in all of the header information */
-	size = elf_ex.e_phentsize * elf_ex.e_phnum;
-	if (size > 65536)
-		goto out;
-	elf_phdata = kmalloc(size, GFP_KERNEL);
-	if (elf_phdata == NULL) {
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size);
-	if (retval < 0)
-		goto out_free_ph;
-
-	dump_phdrs(elf_phdata, elf_ex.e_phnum);
-
-	/* Set some things for later. */
-	for (i = 0; i < elf_ex.e_phnum; i++) {
-		switch (elf_phdata[i].p_type) {
-		case PT_INTERP:
-			has_interp = 1;
-			elf_ihdr = &elf_phdata[i];
-			break;
-		case PT_PHDR:
-			has_ephdr = 1;
-			elf_ephdr = &elf_phdata[i];
-			break;
-		};
-	}
-
-	pr_debug("\n");
-
-	elf_bss = 0;
-	elf_brk = 0;
-
-	elf_stack = 0xffffffff;
-	elf_interpreter = NULL;
-	start_code = 0xffffffff;
-	end_code = 0;
-	end_data = 0;
-
-	/*
-	 * If we get a return value, we change the value to be ENOEXEC
-	 * so that we can exit gracefully and the main binary format
-	 * search loop in 'fs/exec.c' will move onto the next handler
-	 * which should be the normal ELF binary handler.
-	 */
-	retval = look_for_irix_interpreter(&elf_interpreter, &interpreter,
-					   &interp_elf_ex, elf_phdata, bprm,
-					   elf_ex.e_phnum);
-	if (retval) {
-		retval = -ENOEXEC;
-		goto out_free_file;
-	}
-
-	if (elf_interpreter) {
-		retval = verify_irix_interpreter(&interp_elf_ex);
-		if (retval)
-			goto out_free_interp;
-	}
-
-	/* OK, we are done with that, now set up the arg stuff,
-	 * and then start this sucker up.
-	 */
-	retval = -E2BIG;
-	if (!bprm->sh_bang && !bprm->p)
-		goto out_free_interp;
-
-	/* Flush all traces of the currently running executable */
-	retval = flush_old_exec(bprm);
-	if (retval)
-		goto out_free_dentry;
-
-	/* OK, This is the point of no return */
-	current->mm->end_data = 0;
-	current->mm->end_code = 0;
-	current->mm->mmap = NULL;
-	current->flags &= ~PF_FORKNOEXEC;
-	elf_entry = (unsigned int) elf_ex.e_entry;
-
-	/* Do this so that we can load the interpreter, if need be.  We will
-	 * change some of these later.
-	 */
-	setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
-	current->mm->start_stack = bprm->p;
-
-	/* At this point, we assume that the image should be loaded at
-	 * fixed address, not at a variable address.
-	 */
-	old_fs = get_fs();
-	set_fs(get_ds());
-
-	map_executable(bprm->file, elf_phdata, elf_ex.e_phnum, &elf_stack,
-	               &load_addr, &start_code, &elf_bss, &end_code,
-	               &end_data, &elf_brk);
-
-	if (elf_interpreter) {
-		retval = map_interpreter(elf_phdata, &interp_elf_ex,
-					 interpreter, &interp_load_addr,
-					 elf_ex.e_phnum, old_fs, &elf_entry);
-		kfree(elf_interpreter);
-		if (retval) {
-			set_fs(old_fs);
-			printk("Unable to load IRIX ELF interpreter\n");
-			send_sig(SIGSEGV, current, 0);
-			retval = 0;
-			goto out_free_file;
-		}
-	}
-
-	set_fs(old_fs);
-
-	kfree(elf_phdata);
-	set_personality(PER_IRIX32);
-	set_binfmt(&irix_format);
-	compute_creds(bprm);
-	current->flags &= ~PF_FORKNOEXEC;
-	bprm->p = (unsigned long)
-	  create_irix_tables((char *)bprm->p, bprm->argc, bprm->envc,
-			(elf_interpreter ? &elf_ex : NULL),
-			load_addr, interp_load_addr, regs, elf_ephdr);
-	current->mm->start_brk = current->mm->brk = elf_brk;
-	current->mm->end_code = end_code;
-	current->mm->start_code = start_code;
-	current->mm->end_data = end_data;
-	current->mm->start_stack = bprm->p;
-
-	/* Calling set_brk effectively mmaps the pages that we need for the
-	 * bss and break sections.
-	 */
-	set_brk(elf_bss, elf_brk);
-
-	/*
-	 * IRIX maps a page at 0x200000 which holds some system
-	 * information.  Programs depend on this.
-	 */
-	if (irix_map_prda_page())
-		goto out_free_dentry;
-
-	padzero(elf_bss);
-
-	pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk);
-	pr_debug("(end_code) %lx\n" , (long) current->mm->end_code);
-	pr_debug("(start_code) %lx\n" , (long) current->mm->start_code);
-	pr_debug("(end_data) %lx\n" , (long) current->mm->end_data);
-	pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack);
-	pr_debug("(brk) %lx\n" , (long) current->mm->brk);
-
-#if 0 /* XXX No fucking way dude... */
-	/* Why this, you ask???  Well SVr4 maps page 0 as read-only,
-	 * and some applications "depend" upon this behavior.
-	 * Since we do not have the power to recompile these, we
-	 * emulate the SVr4 behavior.  Sigh.
-	 */
-	down_write(&current->mm->mmap_sem);
-	(void) do_mmap(NULL, 0, 4096, PROT_READ | PROT_EXEC,
-		       MAP_FIXED | MAP_PRIVATE, 0);
-	up_write(&current->mm->mmap_sem);
-#endif
-
-	start_thread(regs, elf_entry, bprm->p);
-	if (current->ptrace & PT_PTRACED)
-		send_sig(SIGTRAP, current, 0);
-	return 0;
-out:
-	return retval;
-
-out_free_dentry:
-	allow_write_access(interpreter);
-	fput(interpreter);
-out_free_interp:
-	kfree(elf_interpreter);
-out_free_file:
-out_free_ph:
-	kfree(elf_phdata);
-	goto out;
-}
-
-/* This is really simpleminded and specialized - we are loading an
- * a.out library that is given an ELF header.
- */
-static int load_irix_library(struct file *file)
-{
-	struct elfhdr elf_ex;
-	struct elf_phdr *elf_phdata  =  NULL;
-	unsigned int len = 0;
-	int elf_bss = 0;
-	int retval;
-	unsigned int bss;
-	int error;
-	int i, j, k;
-
-	error = kernel_read(file, 0, (char *) &elf_ex, sizeof(elf_ex));
-	if (error != sizeof(elf_ex))
-		return -ENOEXEC;
-
-	if (memcmp(elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
-		return -ENOEXEC;
-
-	/* First of all, some simple consistency checks. */
-	if (elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
-	   !file->f_op->mmap)
-		return -ENOEXEC;
-
-	/* Now read in all of the header information. */
-	if (sizeof(struct elf_phdr) * elf_ex.e_phnum > PAGE_SIZE)
-		return -ENOEXEC;
-
-	elf_phdata = kmalloc(sizeof(struct elf_phdr) * elf_ex.e_phnum, GFP_KERNEL);
-	if (elf_phdata == NULL)
-		return -ENOMEM;
-
-	retval = kernel_read(file, elf_ex.e_phoff, (char *) elf_phdata,
-			   sizeof(struct elf_phdr) * elf_ex.e_phnum);
-
-	j = 0;
-	for (i=0; i<elf_ex.e_phnum; i++)
-		if ((elf_phdata + i)->p_type == PT_LOAD) j++;
-
-	if (j != 1)  {
-		kfree(elf_phdata);
-		return -ENOEXEC;
-	}
-
-	while (elf_phdata->p_type != PT_LOAD) elf_phdata++;
-
-	/* Now use mmap to map the library into memory. */
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap(file,
-			elf_phdata->p_vaddr & 0xfffff000,
-			elf_phdata->p_filesz + (elf_phdata->p_vaddr & 0xfff),
-			PROT_READ | PROT_WRITE | PROT_EXEC,
-			MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE,
-			elf_phdata->p_offset & 0xfffff000);
-	up_write(&current->mm->mmap_sem);
-
-	k = elf_phdata->p_vaddr + elf_phdata->p_filesz;
-	if (k > elf_bss) elf_bss = k;
-
-	if (error != (elf_phdata->p_vaddr & 0xfffff000)) {
-		kfree(elf_phdata);
-		return error;
-	}
-
-	padzero(elf_bss);
-
-	len = (elf_phdata->p_filesz + elf_phdata->p_vaddr+ 0xfff) & 0xfffff000;
-	bss = elf_phdata->p_memsz + elf_phdata->p_vaddr;
-	if (bss > len) {
-	  down_write(&current->mm->mmap_sem);
-	  do_brk(len, bss-len);
-	  up_write(&current->mm->mmap_sem);
-	}
-	kfree(elf_phdata);
-	return 0;
-}
-
-/* Called through irix_syssgi() to map an elf image given an FD,
- * a phdr ptr USER_PHDRP in userspace, and a count CNT telling how many
- * phdrs there are in the USER_PHDRP array.  We return the vaddr the
- * first phdr was successfully mapped to.
- */
-unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt)
-{
-	unsigned long type, vaddr, filesz, offset, flags;
-	struct elf_phdr __user *hp;
-	struct file *filp;
-	int i, retval;
-
-	pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
-	         fd, user_phdrp, cnt);
-
-	/* First get the verification out of the way. */
-	hp = user_phdrp;
-	if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) {
-		pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n");
-
-		return -EFAULT;
-	}
-
-	dump_phdrs(user_phdrp, cnt);
-
-	for (i = 0; i < cnt; i++, hp++) {
-		if (__get_user(type, &hp->p_type))
-			return -EFAULT;
-		if (type != PT_LOAD) {
-			printk("irix_mapelf: One section is not PT_LOAD!\n");
-			return -ENOEXEC;
-		}
-	}
-
-	filp = fget(fd);
-	if (!filp)
-		return -EACCES;
-	if (!filp->f_op) {
-		printk("irix_mapelf: Bogon filp!\n");
-		fput(filp);
-		return -EACCES;
-	}
-
-	hp = user_phdrp;
-	for (i = 0; i < cnt; i++, hp++) {
-		int prot;
-
-		retval = __get_user(vaddr, &hp->p_vaddr);
-		retval |= __get_user(filesz, &hp->p_filesz);
-		retval |= __get_user(offset, &hp->p_offset);
-		retval |= __get_user(flags, &hp->p_flags);
-		if (retval)
-			return retval;
-
-		prot  = (flags & PF_R) ? PROT_READ : 0;
-		prot |= (flags & PF_W) ? PROT_WRITE : 0;
-		prot |= (flags & PF_X) ? PROT_EXEC : 0;
-
-		down_write(&current->mm->mmap_sem);
-		retval = do_mmap(filp, (vaddr & 0xfffff000),
-				 (filesz + (vaddr & 0xfff)),
-				 prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE),
-				 (offset & 0xfffff000));
-		up_write(&current->mm->mmap_sem);
-
-		if (retval != (vaddr & 0xfffff000)) {
-			printk("irix_mapelf: do_mmap fails with %d!\n", retval);
-			fput(filp);
-			return retval;
-		}
-	}
-
-	pr_debug("irix_mapelf: Success, returning %08lx\n",
-		 (unsigned long) user_phdrp->p_vaddr);
-
-	fput(filp);
-
-	if (__get_user(vaddr, &user_phdrp->p_vaddr))
-		return -EFAULT;
-
-	return vaddr;
-}
-
-/*
- * ELF core dumper
- *
- * Modelled on fs/exec.c:aout_core_dump()
- * Jeremy Fitzhardinge <jeremy@sw.oz.au>
- */
-
-/* These are the only things you should do on a core-file: use only these
- * functions to write out all the necessary info.
- */
-static int dump_write(struct file *file, const void __user *addr, int nr)
-{
-	return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr;
-}
-
-static int dump_seek(struct file *file, off_t off)
-{
-	if (file->f_op->llseek) {
-		if (file->f_op->llseek(file, off, 0) != off)
-			return 0;
-	} else
-		file->f_pos = off;
-	return 1;
-}
-
-/* Decide whether a segment is worth dumping; default is yes to be
- * sure (missing info is worse than too much; etc).
- * Personally I'd include everything, and use the coredump limit...
- *
- * I think we should skip something. But I am not sure how. H.J.
- */
-static inline int maydump(struct vm_area_struct *vma)
-{
-	if (!(vma->vm_flags & (VM_READ|VM_WRITE|VM_EXEC)))
-		return 0;
-#if 1
-	if (vma->vm_flags & (VM_WRITE|VM_GROWSUP|VM_GROWSDOWN))
-		return 1;
-	if (vma->vm_flags & (VM_READ|VM_EXEC|VM_EXECUTABLE|VM_SHARED))
-		return 0;
-#endif
-	return 1;
-}
-
-/* An ELF note in memory. */
-struct memelfnote
-{
-	const char *name;
-	int type;
-	unsigned int datasz;
-	void *data;
-};
-
-static int notesize(struct memelfnote *en)
-{
-	int sz;
-
-	sz = sizeof(struct elf_note);
-	sz += roundup(strlen(en->name) + 1, 4);
-	sz += roundup(en->datasz, 4);
-
-	return sz;
-}
-
-#define DUMP_WRITE(addr, nr)	\
-	if (!dump_write(file, (addr), (nr))) \
-		goto end_coredump;
-#define DUMP_SEEK(off)	\
-	if (!dump_seek(file, (off))) \
-		goto end_coredump;
-
-static int writenote(struct memelfnote *men, struct file *file)
-{
-	struct elf_note en;
-
-	en.n_namesz = strlen(men->name) + 1;
-	en.n_descsz = men->datasz;
-	en.n_type = men->type;
-
-	DUMP_WRITE(&en, sizeof(en));
-	DUMP_WRITE(men->name, en.n_namesz);
-	/* XXX - cast from long long to long to avoid need for libgcc.a */
-	DUMP_SEEK(roundup((unsigned long)file->f_pos, 4));	/* XXX */
-	DUMP_WRITE(men->data, men->datasz);
-	DUMP_SEEK(roundup((unsigned long)file->f_pos, 4));	/* XXX */
-
-	return 1;
-
-end_coredump:
-	return 0;
-}
-#undef DUMP_WRITE
-#undef DUMP_SEEK
-
-#define DUMP_WRITE(addr, nr)	\
-	if (!dump_write(file, (addr), (nr))) \
-		goto end_coredump;
-#define DUMP_SEEK(off)	\
-	if (!dump_seek(file, (off))) \
-		goto end_coredump;
-
-/* Actual dumper.
- *
- * This is a two-pass process; first we find the offsets of the bits,
- * and then they are actually written out.  If we run out of core limit
- * we just truncate.
- */
-static int irix_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit)
-{
-	int has_dumped = 0;
-	mm_segment_t fs;
-	int segs;
-	int i;
-	size_t size;
-	struct vm_area_struct *vma;
-	struct elfhdr elf;
-	off_t offset = 0, dataoff;
-	int numnote = 3;
-	struct memelfnote notes[3];
-	struct elf_prstatus prstatus;	/* NT_PRSTATUS */
-	elf_fpregset_t fpu;		/* NT_PRFPREG */
-	struct elf_prpsinfo psinfo;	/* NT_PRPSINFO */
-
-	/* Count what's needed to dump, up to the limit of coredump size. */
-	segs = 0;
-	size = 0;
-	for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
-		if (maydump(vma))
-		{
-			int sz = vma->vm_end-vma->vm_start;
-
-			if (size+sz >= limit)
-				break;
-			else
-				size += sz;
-		}
-
-		segs++;
-	}
-	pr_debug("irix_core_dump: %d segs taking %d bytes\n", segs, size);
-
-	/* Set up header. */
-	memcpy(elf.e_ident, ELFMAG, SELFMAG);
-	elf.e_ident[EI_CLASS] = ELFCLASS32;
-	elf.e_ident[EI_DATA] = ELFDATA2LSB;
-	elf.e_ident[EI_VERSION] = EV_CURRENT;
-	elf.e_ident[EI_OSABI] = ELF_OSABI;
-	memset(elf.e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD);
-
-	elf.e_type = ET_CORE;
-	elf.e_machine = ELF_ARCH;
-	elf.e_version = EV_CURRENT;
-	elf.e_entry = 0;
-	elf.e_phoff = sizeof(elf);
-	elf.e_shoff = 0;
-	elf.e_flags = 0;
-	elf.e_ehsize = sizeof(elf);
-	elf.e_phentsize = sizeof(struct elf_phdr);
-	elf.e_phnum = segs+1;		/* Include notes. */
-	elf.e_shentsize = 0;
-	elf.e_shnum = 0;
-	elf.e_shstrndx = 0;
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	has_dumped = 1;
-	current->flags |= PF_DUMPCORE;
-
-	DUMP_WRITE(&elf, sizeof(elf));
-	offset += sizeof(elf);				/* Elf header. */
-	offset += (segs+1) * sizeof(struct elf_phdr);	/* Program headers. */
-
-	/* Set up the notes in similar form to SVR4 core dumps made
-	 * with info from their /proc.
-	 */
-	memset(&psinfo, 0, sizeof(psinfo));
-	memset(&prstatus, 0, sizeof(prstatus));
-
-	notes[0].name = "CORE";
-	notes[0].type = NT_PRSTATUS;
-	notes[0].datasz = sizeof(prstatus);
-	notes[0].data = &prstatus;
-	prstatus.pr_info.si_signo = prstatus.pr_cursig = signr;
-	prstatus.pr_sigpend = current->pending.signal.sig[0];
-	prstatus.pr_sighold = current->blocked.sig[0];
-	psinfo.pr_pid = prstatus.pr_pid = task_pid_vnr(current);
-	psinfo.pr_ppid = prstatus.pr_ppid = task_pid_vnr(current->parent);
-	psinfo.pr_pgrp = prstatus.pr_pgrp = task_pgrp_vnr(current);
-	psinfo.pr_sid = prstatus.pr_sid = task_session_vnr(current);
-	if (thread_group_leader(current)) {
-		/*
-		 * This is the record for the group leader.  Add in the
-		 * cumulative times of previous dead threads.  This total
-		 * won't include the time of each live thread whose state
-		 * is included in the core dump.  The final total reported
-		 * to our parent process when it calls wait4 will include
-		 * those sums as well as the little bit more time it takes
-		 * this and each other thread to finish dying after the
-		 * core dump synchronization phase.
-		 */
-		jiffies_to_timeval(current->utime + current->signal->utime,
-		                   &prstatus.pr_utime);
-		jiffies_to_timeval(current->stime + current->signal->stime,
-		                   &prstatus.pr_stime);
-	} else {
-		jiffies_to_timeval(current->utime, &prstatus.pr_utime);
-		jiffies_to_timeval(current->stime, &prstatus.pr_stime);
-	}
-	jiffies_to_timeval(current->signal->cutime, &prstatus.pr_cutime);
-	jiffies_to_timeval(current->signal->cstime, &prstatus.pr_cstime);
-
-	if (sizeof(elf_gregset_t) != sizeof(struct pt_regs)) {
-		printk("sizeof(elf_gregset_t) (%d) != sizeof(struct pt_regs) "
-		       "(%d)\n", sizeof(elf_gregset_t), sizeof(struct pt_regs));
-	} else {
-		*(struct pt_regs *)&prstatus.pr_reg = *regs;
-	}
-
-	notes[1].name = "CORE";
-	notes[1].type = NT_PRPSINFO;
-	notes[1].datasz = sizeof(psinfo);
-	notes[1].data = &psinfo;
-	i = current->state ? ffz(~current->state) + 1 : 0;
-	psinfo.pr_state = i;
-	psinfo.pr_sname = (i < 0 || i > 5) ? '.' : "RSDZTD"[i];
-	psinfo.pr_zomb = psinfo.pr_sname == 'Z';
-	psinfo.pr_nice = task_nice(current);
-	psinfo.pr_flag = current->flags;
-	psinfo.pr_uid = current->uid;
-	psinfo.pr_gid = current->gid;
-	{
-		int i, len;
-
-		set_fs(fs);
-
-		len = current->mm->arg_end - current->mm->arg_start;
-		len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len;
-		(void *) copy_from_user(&psinfo.pr_psargs,
-			       (const char __user *)current->mm->arg_start, len);
-		for (i = 0; i < len; i++)
-			if (psinfo.pr_psargs[i] == 0)
-				psinfo.pr_psargs[i] = ' ';
-		psinfo.pr_psargs[len] = 0;
-
-		set_fs(KERNEL_DS);
-	}
-	strlcpy(psinfo.pr_fname, current->comm, sizeof(psinfo.pr_fname));
-
-	/* Try to dump the FPU. */
-	prstatus.pr_fpvalid = dump_fpu(regs, &fpu);
-	if (!prstatus.pr_fpvalid) {
-		numnote--;
-	} else {
-		notes[2].name = "CORE";
-		notes[2].type = NT_PRFPREG;
-		notes[2].datasz = sizeof(fpu);
-		notes[2].data = &fpu;
-	}
-
-	/* Write notes phdr entry. */
-	{
-		struct elf_phdr phdr;
-		int sz = 0;
-
-		for (i = 0; i < numnote; i++)
-			sz += notesize(&notes[i]);
-
-		phdr.p_type = PT_NOTE;
-		phdr.p_offset = offset;
-		phdr.p_vaddr = 0;
-		phdr.p_paddr = 0;
-		phdr.p_filesz = sz;
-		phdr.p_memsz = 0;
-		phdr.p_flags = 0;
-		phdr.p_align = 0;
-
-		offset += phdr.p_filesz;
-		DUMP_WRITE(&phdr, sizeof(phdr));
-	}
-
-	/* Page-align dumped data. */
-	dataoff = offset = roundup(offset, PAGE_SIZE);
-
-	/* Write program headers for segments dump. */
-	for (vma = current->mm->mmap, i = 0;
-		i < segs && vma != NULL; vma = vma->vm_next) {
-		struct elf_phdr phdr;
-		size_t sz;
-
-		i++;
-
-		sz = vma->vm_end - vma->vm_start;
-
-		phdr.p_type = PT_LOAD;
-		phdr.p_offset = offset;
-		phdr.p_vaddr = vma->vm_start;
-		phdr.p_paddr = 0;
-		phdr.p_filesz = maydump(vma) ? sz : 0;
-		phdr.p_memsz = sz;
-		offset += phdr.p_filesz;
-		phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
-		if (vma->vm_flags & VM_WRITE)
-			phdr.p_flags |= PF_W;
-		if (vma->vm_flags & VM_EXEC)
-			phdr.p_flags |= PF_X;
-		phdr.p_align = PAGE_SIZE;
-
-		DUMP_WRITE(&phdr, sizeof(phdr));
-	}
-
-	for (i = 0; i < numnote; i++)
-		if (!writenote(&notes[i], file))
-			goto end_coredump;
-
-	set_fs(fs);
-
-	DUMP_SEEK(dataoff);
-
-	for (i = 0, vma = current->mm->mmap;
-	    i < segs && vma != NULL;
-	    vma = vma->vm_next) {
-		unsigned long addr = vma->vm_start;
-		unsigned long len = vma->vm_end - vma->vm_start;
-
-		if (!maydump(vma))
-			continue;
-		i++;
-		pr_debug("elf_core_dump: writing %08lx %lx\n", addr, len);
-		DUMP_WRITE((void __user *)addr, len);
-	}
-
-	if ((off_t) file->f_pos != offset) {
-		/* Sanity check. */
-		printk("elf_core_dump: file->f_pos (%ld) != offset (%ld)\n",
-		       (off_t) file->f_pos, offset);
-	}
-
-end_coredump:
-	set_fs(fs);
-	return has_dumped;
-}
-
-static int __init init_irix_binfmt(void)
-{
-	extern int init_inventory(void);
-	extern asmlinkage unsigned long sys_call_table;
-	extern asmlinkage unsigned long sys_call_table_irix5;
-
-	init_inventory();
-
-	/*
-	 * Copy the IRIX5 syscall table (8000 bytes) into the main syscall
-	 * table. The IRIX5 calls are located by an offset of 8000 bytes
-	 * from the beginning of the main table.
-	 */
-	memcpy((void *) ((unsigned long) &sys_call_table + 8000),
-		&sys_call_table_irix5, 8000);
-
-	return register_binfmt(&irix_format);
-}
-
-static void __exit exit_irix_binfmt(void)
-{
-	/*
-	 * Remove the Irix ELF loader.
-	 */
-	unregister_binfmt(&irix_format);
-}
-
-module_init(init_irix_binfmt)
-module_exit(exit_irix_binfmt)
diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c
deleted file mode 100644
index cf2dcd3d6a93..000000000000
--- a/arch/mips/kernel/irixinv.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Support the inventory interface for IRIX binaries
- * This is invoked before the mm layer is working, so we do not
- * use the linked lists for the inventory yet.
- *
- * Miguel de Icaza, 1997.
- */
-#include <linux/mm.h>
-#include <asm/inventory.h>
-#include <asm/uaccess.h>
-
-#define MAX_INVENTORY 50
-int inventory_items = 0;
-
-static inventory_t inventory [MAX_INVENTORY];
-
-void add_to_inventory(int class, int type, int controller, int unit, int state)
-{
-	inventory_t *ni = &inventory [inventory_items];
-
-	if (inventory_items == MAX_INVENTORY)
-		return;
-
-	ni->inv_class      = class;
-	ni->inv_type       = type;
-	ni->inv_controller = controller;
-	ni->inv_unit       = unit;
-	ni->inv_state      = state;
-	ni->inv_next       = ni;
-	inventory_items++;
-}
-
-int dump_inventory_to_user(void __user *userbuf, int size)
-{
-	inventory_t *inv  = &inventory [0];
-	inventory_t __user *user = userbuf;
-	int v;
-
-	if (!access_ok(VERIFY_WRITE, userbuf, size))
-		return -EFAULT;
-
-	for (v = 0; v < inventory_items; v++){
-		inv = &inventory [v];
-		if (copy_to_user (user, inv, sizeof (inventory_t)))
-			return -EFAULT;
-		user++;
-	}
-	return inventory_items * sizeof(inventory_t);
-}
-
-int __init init_inventory(void)
-{
-	/*
-	 * gross hack while we put the right bits all over the kernel
-	 * most likely this will not let just anyone run the X server
-	 * until we put the right values all over the place
-	 */
-	add_to_inventory(10, 3, 0, 0, 16400);
-	add_to_inventory(1, 1, 150, -1, 12);
-	add_to_inventory(1, 3, 0, 0, 8976);
-	add_to_inventory(1, 2, 0, 0, 8976);
-	add_to_inventory(4, 8, 0, 0, 2);
-	add_to_inventory(5, 5, 0, 0, 1);
-	add_to_inventory(3, 3, 0, 0, 32768);
-	add_to_inventory(3, 4, 0, 0, 32768);
-	add_to_inventory(3, 8, 0, 0, 524288);
-	add_to_inventory(3, 9, 0, 0, 64);
-	add_to_inventory(3, 1, 0, 0, 67108864);
-	add_to_inventory(12, 3, 0, 0, 16);
-	add_to_inventory(8, 7, 17, 0, 16777472);
-	add_to_inventory(8, 0, 0, 0, 1);
-	add_to_inventory(2, 1, 0, 13, 2);
-	add_to_inventory(2, 2, 0, 2, 0);
-	add_to_inventory(2, 2, 0, 1, 0);
-	add_to_inventory(7, 14, 0, 0, 6);
-
-	return 0;
-}
diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c
deleted file mode 100644
index b39bdba82e02..000000000000
--- a/arch/mips/kernel/irixioctl.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * irixioctl.c: A fucking mess...
- *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sockios.h>
-#include <linux/syscalls.h>
-#include <linux/tty.h>
-#include <linux/file.h>
-#include <linux/rcupdate.h>
-
-#include <asm/uaccess.h>
-#include <asm/ioctl.h>
-#include <asm/ioctls.h>
-
-#undef DEBUG_IOCTLS
-#undef DEBUG_MISSING_IOCTL
-
-struct irix_termios {
-	tcflag_t c_iflag, c_oflag, c_cflag, c_lflag;
-	cc_t c_cc[NCCS];
-};
-
-asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
-{
-	struct tty_struct *tp, *rtp;
-	mm_segment_t old_fs;
-	int i, error = 0;
-
-#ifdef DEBUG_IOCTLS
-	printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd);
-#endif
-	switch(cmd) {
-	case 0x00005401:
-#ifdef DEBUG_IOCTLS
-		printk("TCGETA, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TCGETA, arg);
-		break;
-
-	case 0x0000540d: {
-		struct termios kt;
-		struct irix_termios __user *it =
-			(struct irix_termios __user *) arg;
-
-#ifdef DEBUG_IOCTLS
-		printk("TCGETS, %08lx) ", arg);
-#endif
-		if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
-			error = -EFAULT;
-			break;
-		}
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
-		set_fs(old_fs);
-		if (error)
-			break;
-
-		error = __put_user(kt.c_iflag, &it->c_iflag);
-		error |= __put_user(kt.c_oflag, &it->c_oflag);
-		error |= __put_user(kt.c_cflag, &it->c_cflag);
-		error |= __put_user(kt.c_lflag, &it->c_lflag);
-
-		for (i = 0; i < NCCS; i++)
-			error |= __put_user(kt.c_cc[i], &it->c_cc[i]);
-		break;
-	}
-
-	case 0x0000540e: {
-		struct termios kt;
-		struct irix_termios *it = (struct irix_termios *) arg;
-
-#ifdef DEBUG_IOCTLS
-		printk("TCSETS, %08lx) ", arg);
-#endif
-		if (!access_ok(VERIFY_READ, it, sizeof(*it))) {
-			error = -EFAULT;
-			break;
-		}
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
-		set_fs(old_fs);
-		if (error)
-			break;
-
-		error = __get_user(kt.c_iflag, &it->c_iflag);
-		error |= __get_user(kt.c_oflag, &it->c_oflag);
-		error |= __get_user(kt.c_cflag, &it->c_cflag);
-		error |= __get_user(kt.c_lflag, &it->c_lflag);
-
-		for (i = 0; i < NCCS; i++)
-			error |= __get_user(kt.c_cc[i], &it->c_cc[i]);
-
-		if (error)
-			break;
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TCSETS, (unsigned long) &kt);
-		set_fs(old_fs);
-		break;
-	}
-
-	case 0x0000540f:
-#ifdef DEBUG_IOCTLS
-		printk("TCSETSW, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TCSETSW, arg);
-		break;
-
-	case 0x00005471:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCNOTTY, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TIOCNOTTY, arg);
-		break;
-
-	case 0x00007416: {
-		pid_t pid;
-#ifdef DEBUG_IOCTLS
-		printk("TIOCGSID, %08lx) ", arg);
-#endif
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TIOCGSID, (unsigned long)&pid);
-		set_fs(old_fs);
-		if (!error)
-			error = put_user(pid, (unsigned long __user *) arg);
-		break;
-	}
-	case 0x746e:
-		/* TIOCSTART, same effect as hitting ^Q */
-#ifdef DEBUG_IOCTLS
-		printk("TIOCSTART, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TCXONC, TCOON);
-		break;
-
-	case 0x20006968:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCGETLABEL, %08lx) ", arg);
-#endif
-		error = -ENOPKG;
-		break;
-
-	case 0x40047477:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCGPGRP, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TIOCGPGRP, arg);
-#ifdef DEBUG_IOCTLS
-		printk("arg=%d ", *(int *)arg);
-#endif
-		break;
-
-	case 0x40087468:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCGWINSZ, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TIOCGWINSZ, arg);
-		break;
-
-	case 0x8004667e:
-		error = sys_ioctl(fd, FIONBIO, arg);
-		break;
-
-	case 0x80047476:
-		error = sys_ioctl(fd, TIOCSPGRP, arg);
-		break;
-
-	case 0x8020690c:
-		error = sys_ioctl(fd, SIOCSIFADDR, arg);
-		break;
-
-	case 0x80206910:
-		error = sys_ioctl(fd, SIOCSIFFLAGS, arg);
-		break;
-
-	case 0xc0206911:
-		error = sys_ioctl(fd, SIOCGIFFLAGS, arg);
-		break;
-
-	case 0xc020691b:
-		error = sys_ioctl(fd, SIOCGIFMETRIC, arg);
-		break;
-
-	default: {
-#ifdef DEBUG_MISSING_IOCTL
-		char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n";
-
-#ifdef DEBUG_IOCTLS
-		printk("UNIMP_IOCTL, %08lx)\n", arg);
-#endif
-		old_fs = get_fs(); set_fs(get_ds());
-		sys_write(2, msg, strlen(msg));
-		set_fs(old_fs);
-		printk("[%s:%d] Does unimplemented IRIX ioctl cmd %08lx\n",
-		       current->comm, current->pid, cmd);
-		do_exit(255);
-#else
-		error = sys_ioctl(fd, cmd, arg);
-#endif
-	}
-
-	};
-#ifdef DEBUG_IOCTLS
-	printk("error=%d\n", error);
-#endif
-	return error;
-}
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
deleted file mode 100644
index 0215c805a592..000000000000
--- a/arch/mips/kernel/irixsig.c
+++ /dev/null
@@ -1,888 +0,0 @@
-/*
- * irixsig.c: WHEEE, IRIX signals!  YOW, am I compatible or what?!?!
- *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- * Copyright (C) 1997 - 2000 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 2000 Silicon Graphics, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/time.h>
-#include <linux/ptrace.h>
-#include <linux/resource.h>
-
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-#undef DEBUG_SIG
-
-#define _S(nr) (1<<((nr)-1))
-
-#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP)))
-
-#define _IRIX_NSIG		128
-#define _IRIX_NSIG_BPW		BITS_PER_LONG
-#define _IRIX_NSIG_WORDS	(_IRIX_NSIG / _IRIX_NSIG_BPW)
-
-typedef struct {
-	unsigned long sig[_IRIX_NSIG_WORDS];
-} irix_sigset_t;
-
-struct sigctx_irix5 {
-	u32 rmask, cp0_status;
-	u64 pc;
-	u64 regs[32];
-	u64 fpregs[32];
-	u32 usedfp, fpcsr, fpeir, sstk_flags;
-	u64 hi, lo;
-	u64 cp0_cause, cp0_badvaddr, _unused0;
-	irix_sigset_t sigset;
-	u64 weird_fpu_thing;
-	u64 _unused1[31];
-};
-
-#ifdef DEBUG_SIG
-/* Debugging */
-static inline void dump_irix5_sigctx(struct sigctx_irix5 *c)
-{
-	int i;
-
-	printk("misc: rmask[%08lx] status[%08lx] pc[%08lx]\n",
-	       (unsigned long) c->rmask,
-	       (unsigned long) c->cp0_status,
-	       (unsigned long) c->pc);
-	printk("regs: ");
-	for(i = 0; i < 16; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]);
-	printk("\nregs: ");
-	for(i = 16; i < 32; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]);
-	printk("\nfpregs: ");
-	for(i = 0; i < 16; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]);
-	printk("\nfpregs: ");
-	for(i = 16; i < 32; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]);
-	printk("misc: usedfp[%d] fpcsr[%08lx] fpeir[%08lx] stk_flgs[%08lx]\n",
-	       (int) c->usedfp, (unsigned long) c->fpcsr,
-	       (unsigned long) c->fpeir, (unsigned long) c->sstk_flags);
-	printk("misc: hi[%08lx] lo[%08lx] cause[%08lx] badvaddr[%08lx]\n",
-	       (unsigned long) c->hi, (unsigned long) c->lo,
-	       (unsigned long) c->cp0_cause, (unsigned long) c->cp0_badvaddr);
-	printk("misc: sigset<0>[%08lx] sigset<1>[%08lx] sigset<2>[%08lx] "
-	       "sigset<3>[%08lx]\n", (unsigned long) c->sigset.sig[0],
-	       (unsigned long) c->sigset.sig[1],
-	       (unsigned long) c->sigset.sig[2],
-	       (unsigned long) c->sigset.sig[3]);
-}
-#endif
-
-static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
-			    int signr, sigset_t *oldmask)
-{
-	struct sigctx_irix5 __user *ctx;
-	unsigned long sp;
-	int error, i;
-
-	sp = regs->regs[29];
-	sp -= sizeof(struct sigctx_irix5);
-	sp &= ~(0xf);
-	ctx = (struct sigctx_irix5 __user *) sp;
-	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
-		goto segv_and_exit;
-
-	error = __put_user(0, &ctx->weird_fpu_thing);
-	error |= __put_user(~(0x00000001), &ctx->rmask);
-	error |= __put_user(0, &ctx->regs[0]);
-	for(i = 1; i < 32; i++)
-		error |= __put_user((u64) regs->regs[i], &ctx->regs[i]);
-
-	error |= __put_user((u64) regs->hi, &ctx->hi);
-	error |= __put_user((u64) regs->lo, &ctx->lo);
-	error |= __put_user((u64) regs->cp0_epc, &ctx->pc);
-	error |= __put_user(!!used_math(), &ctx->usedfp);
-	error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
-	error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
-
-	error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
-
-	error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0;
-
-	if (error)
-		goto segv_and_exit;
-
-#ifdef DEBUG_SIG
-	dump_irix5_sigctx(ctx);
-#endif
-
-	regs->regs[4] = (unsigned long) signr;
-	regs->regs[5] = 0; /* XXX sigcode XXX */
-	regs->regs[6] = regs->regs[29] = sp;
-	regs->regs[7] = (unsigned long) ka->sa.sa_handler;
-	regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer;
-
-	return 1;
-
-segv_and_exit:
-	force_sigsegv(signr, current);
-	return 0;
-}
-
-static int inline
-setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
-               int signr, sigset_t *oldmask, siginfo_t *info)
-{
-	printk("Aiee: setup_tr_frame wants to be written");
-	do_exit(SIGSEGV);
-}
-
-static inline int handle_signal(unsigned long sig, siginfo_t *info,
-	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
-{
-	int ret;
-
-	switch(regs->regs[0]) {
-	case ERESTARTNOHAND:
-		regs->regs[2] = EINTR;
-		break;
-	case ERESTARTSYS:
-		if(!(ka->sa.sa_flags & SA_RESTART)) {
-			regs->regs[2] = EINTR;
-			break;
-		}
-	/* fallthrough */
-	case ERESTARTNOINTR:		/* Userland will reload $v0.  */
-		regs->cp0_epc -= 8;
-	}
-
-	regs->regs[0] = 0;		/* Don't deal with this again.  */
-
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = setup_irix_rt_frame(ka, regs, sig, oldset, info);
-	else
-		ret = setup_irix_frame(ka, regs, sig, oldset);
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	return ret;
-}
-
-void do_irix_signal(struct pt_regs *regs)
-{
-	struct k_sigaction ka;
-	siginfo_t info;
-	int signr;
-	sigset_t *oldset;
-
-	/*
-	 * We want the common case to go fast, which is why we may in certain
-	 * cases get here from kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
-			/* a signal was successfully delivered; the saved
-			 * sigmask will have been stored in the signal frame,
-			 * and will be restored by sigreturn, so we can simply
-			 * clear the TIF_RESTORE_SIGMASK flag */
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
-		}
-
-		return;
-	}
-
-	/*
-	 * Who's code doesn't conform to the restartable syscall convention
-	 * dies here!!!  The li instruction, a single machine instruction,
-	 * must directly be followed by the syscall instruction.
-	 */
-	if (regs->regs[0]) {
-		if (regs->regs[2] == ERESTARTNOHAND ||
-		    regs->regs[2] == ERESTARTSYS ||
-		    regs->regs[2] == ERESTARTNOINTR) {
-			regs->cp0_epc -= 8;
-		}
-		if (regs->regs[2] == ERESTART_RESTARTBLOCK) {
-			regs->regs[2] = __NR_restart_syscall;
-			regs->regs[7] = regs->regs[26];
-			regs->cp0_epc -= 4;
-		}
-		regs->regs[0] = 0;	/* Don't deal with this again.  */
-	}
-
-	/*
-	* If there's no signal to deliver, we just put the saved sigmask
-	* back
-	*/
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-}
-
-asmlinkage void
-irix_sigreturn(struct pt_regs *regs)
-{
-	struct sigctx_irix5 __user *context, *magic;
-	unsigned long umask, mask;
-	u64 *fregs;
-	u32 usedfp;
-	int error, sig, i, base = 0;
-	sigset_t blocked;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-
-	context = (struct sigctx_irix5 __user *) regs->regs[base + 4];
-	magic = (struct sigctx_irix5 __user *) regs->regs[base + 5];
-	sig = (int) regs->regs[base + 6];
-#ifdef DEBUG_SIG
-	printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n",
-	       current->comm, current->pid, context, magic, sig);
-#endif
-	if (!context)
-		context = magic;
-	if (!access_ok(VERIFY_READ, context, sizeof(struct sigctx_irix5)))
-		goto badframe;
-
-#ifdef DEBUG_SIG
-	dump_irix5_sigctx(context);
-#endif
-
-	error = __get_user(regs->cp0_epc, &context->pc);
-	error |= __get_user(umask, &context->rmask);
-
-	mask = 2;
-	for (i = 1; i < 32; i++, mask <<= 1) {
-		if (umask & mask)
-			error |= __get_user(regs->regs[i], &context->regs[i]);
-	}
-	error |= __get_user(regs->hi, &context->hi);
-	error |= __get_user(regs->lo, &context->lo);
-
-	error |= __get_user(usedfp, &context->usedfp);
-	if ((umask & 1) && usedfp) {
-		fregs = (u64 *) &current->thread.fpu;
-
-		for(i = 0; i < 32; i++)
-			error |= __get_user(fregs[i], &context->fpregs[i]);
-		error |= __get_user(current->thread.fpu.fcr31, &context->fpcsr);
-	}
-
-	/* XXX do sigstack crapola here... XXX */
-
-	error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0;
-
-	if (error)
-		goto badframe;
-
-	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	/*
-	 * Don't let your children do this ...
-	 */
-	__asm__ __volatile__(
-		"move\t$29,%0\n\t"
-		"j\tsyscall_exit"
-		:/* no outputs */
-		:"r" (&regs));
-		/* Unreached */
-
-badframe:
-	force_sig(SIGSEGV, current);
-}
-
-struct sigact_irix5 {
-	int flags;
-	void (*handler)(int);
-	u32 sigset[4];
-	int _unused0[2];
-};
-
-#define SIG_SETMASK32	256	/* Goodie from SGI for BSD compatibility:
-				   set only the low 32 bit of the sigset.  */
-
-#ifdef DEBUG_SIG
-static inline void dump_sigact_irix5(struct sigact_irix5 *p)
-{
-	printk("<f[%d] hndlr[%08lx] msk[%08lx]>", p->flags,
-	       (unsigned long) p->handler,
-	       (unsigned long) p->sigset[0]);
-}
-#endif
-
-asmlinkage int
-irix_sigaction(int sig, const struct sigaction __user *act,
-	      struct sigaction __user *oact, void __user *trampoline)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-#ifdef DEBUG_SIG
-	printk(" (%d,%s,%s,%08lx) ", sig, (!new ? "0" : "NEW"),
-	       (!old ? "0" : "OLD"), trampoline);
-	if(new) {
-		dump_sigact_irix5(new); printk(" ");
-	}
-#endif
-	if (act) {
-		sigset_t mask;
-		int err;
-
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
-			return -EFAULT;
-		err = __get_user(new_ka.sa.sa_handler, &act->sa_handler);
-		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
-
-		err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0;
-		if (err)
-			return err;
-
-		/*
-		 * Hmmm... methinks IRIX libc always passes a valid trampoline
-		 * value for all invocations of sigaction.  Will have to
-		 * investigate.  POSIX POSIX, die die die...
-		 */
-		new_ka.sa_restorer = trampoline;
-	}
-
-/* XXX Implement SIG_SETMASK32 for IRIX compatibility */
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		int err;
-
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
-			return -EFAULT;
-
-		err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
-		err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask,
-		               sizeof(sigset_t)) ? -EFAULT : 0;
-		if (err)
-			return -EFAULT;
-	}
-
-	return ret;
-}
-
-asmlinkage int irix_sigpending(irix_sigset_t __user *set)
-{
-	return do_sigpending(set, sizeof(*set));
-}
-
-asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new,
-	irix_sigset_t __user *old)
-{
-	sigset_t oldbits, newbits;
-
-	if (new) {
-		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			return -EFAULT;
-		if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4))
-			return -EFAULT;
-		sigdelsetmask(&newbits, ~_BLOCKABLE);
-
-		spin_lock_irq(&current->sighand->siglock);
-		oldbits = current->blocked;
-
-		switch(how) {
-		case 1:
-			sigorsets(&newbits, &oldbits, &newbits);
-			break;
-
-		case 2:
-			sigandsets(&newbits, &oldbits, &newbits);
-			break;
-
-		case 3:
-			break;
-
-		case 256:
-			siginitset(&newbits, newbits.sig[0]);
-			break;
-
-		default:
-			spin_unlock_irq(&current->sighand->siglock);
-			return -EINVAL;
-		}
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
-	if (old)
-		return copy_to_user(old, &current->blocked,
-		                  sizeof(unsigned long)*4) ? -EFAULT : 0;
-
-	return 0;
-}
-
-asmlinkage int irix_sigsuspend(struct pt_regs *regs)
-{
-	sigset_t newset;
-	sigset_t __user *uset;
-
-	uset = (sigset_t __user *) regs->regs[4];
-	if (copy_from_user(&newset, uset, sizeof(sigset_t)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
-/* hate hate hate... */
-struct irix5_siginfo {
-	int sig, code, error;
-	union {
-		char unused[128 - (3 * 4)]; /* Safety net. */
-		struct {
-			int pid;
-			union {
-				int uid;
-				struct {
-					int utime, status, stime;
-				} child;
-			} procdata;
-		} procinfo;
-
-		unsigned long fault_addr;
-
-		struct {
-			int fd;
-			long band;
-		} fileinfo;
-
-		unsigned long sigval;
-	} stuff;
-};
-
-asmlinkage int irix_sigpoll_sys(unsigned long __user *set,
-	struct irix5_siginfo __user *info, struct timespec __user *tp)
-{
-	long expire = MAX_SCHEDULE_TIMEOUT;
-	sigset_t kset;
-	int i, sig, error, timeo = 0;
-	struct timespec ktp;
-
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n",
-	       current->comm, current->pid, set, info, tp);
-#endif
-
-	/* Must always specify the signal set. */
-	if (!set)
-		return -EINVAL;
-
-	if (copy_from_user(&kset, set, sizeof(set)))
-		return -EFAULT;
-
-	if (info && clear_user(info, sizeof(*info))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	if (tp) {
-		if (copy_from_user(&ktp, tp, sizeof(*tp)))
-			return -EFAULT;
-
-		if (!ktp.tv_sec && !ktp.tv_nsec)
-			return -EINVAL;
-
-		expire = timespec_to_jiffies(&ktp) +
-		         (ktp.tv_sec || ktp.tv_nsec);
-	}
-
-	while(1) {
-		long tmp = 0;
-
-		expire = schedule_timeout_interruptible(expire);
-
-		for (i=0; i < _IRIX_NSIG_WORDS; i++)
-			tmp |= (current->pending.signal.sig[i] & kset.sig[i]);
-
-		if (tmp)
-			break;
-		if (!expire) {
-			timeo = 1;
-			break;
-		}
-		if (signal_pending(current))
-			return -EINTR;
-	}
-	if (timeo)
-		return -EAGAIN;
-
-	for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
-		if (sigismember (&kset, sig))
-			continue;
-		if (sigismember (&current->pending.signal, sig)) {
-			/* XXX need more than this... */
-			if (info)
-				return copy_to_user(&info->sig, &sig, sizeof(sig));
-			return 0;
-		}
-	}
-
-	/* Should not get here, but do something sane if we do. */
-	error = -EINTR;
-
-out:
-	return error;
-}
-
-/* This is here because of irix5_siginfo definition. */
-#define IRIX_P_PID    0
-#define IRIX_P_PGID   2
-#define IRIX_P_ALL    7
-
-#define W_EXITED     1
-#define W_TRAPPED    2
-#define W_STOPPED    4
-#define W_CONT       8
-#define W_NOHANG    64
-
-#define W_MASK      (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG)
-
-asmlinkage int irix_waitsys(int type, int upid,
-	struct irix5_siginfo __user *info, int options,
-	struct rusage __user *ru)
-{
-	struct pid *pid = NULL;
-	int flag, retval;
-	DECLARE_WAITQUEUE(wait, current);
-	struct task_struct *tsk;
-	struct task_struct *p;
-	struct list_head *_p;
-
-	if (!info)
-		return -EINVAL;
-
-	if (!access_ok(VERIFY_WRITE, info, sizeof(*info)))
-		return -EFAULT;
-
-	if (ru)
-		if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru)))
-			return -EFAULT;
-
-	if (options & ~W_MASK)
-		return -EINVAL;
-
-	if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL)
-		return -EINVAL;
-
-	if (type != IRIX_P_ALL)
-		pid = find_get_pid(upid);
-	add_wait_queue(&current->signal->wait_chldexit, &wait);
-repeat:
-	flag = 0;
-	current->state = TASK_INTERRUPTIBLE;
-	read_lock(&tasklist_lock);
-	tsk = current;
-	list_for_each(_p, &tsk->children) {
-		p = list_entry(_p, struct task_struct, sibling);
-		if ((type == IRIX_P_PID) && task_pid(p) != pid)
-			continue;
-		if ((type == IRIX_P_PGID) && task_pgrp(p) != pid)
-			continue;
-		if ((p->exit_signal != SIGCHLD))
-			continue;
-		flag = 1;
-		switch (p->state) {
-		case TASK_STOPPED:
-			if (!p->exit_code)
-				continue;
-			if (!(options & (W_TRAPPED|W_STOPPED)) &&
-			    !(p->ptrace & PT_PTRACED))
-				continue;
-			read_unlock(&tasklist_lock);
-
-			/* move to end of parent's list to avoid starvation */
-			write_lock_irq(&tasklist_lock);
-			remove_parent(p);
-			add_parent(p);
-			write_unlock_irq(&tasklist_lock);
-			retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
-			if (retval)
-				goto end_waitsys;
-
-			retval = __put_user(SIGCHLD, &info->sig);
-			retval |= __put_user(0, &info->code);
-			retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid);
-			retval |= __put_user((p->exit_code >> 8) & 0xff,
-			           &info->stuff.procinfo.procdata.child.status);
-			retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
-			retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
-			if (retval)
-				goto end_waitsys;
-
-			p->exit_code = 0;
-			goto end_waitsys;
-
-		case EXIT_ZOMBIE:
-			current->signal->cutime += p->utime + p->signal->cutime;
-			current->signal->cstime += p->stime + p->signal->cstime;
-			if (ru != NULL)
-				getrusage(p, RUSAGE_BOTH, ru);
-			retval = __put_user(SIGCHLD, &info->sig);
-			retval |= __put_user(1, &info->code);      /* CLD_EXITED */
-			retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid);
-			retval |= __put_user((p->exit_code >> 8) & 0xff,
-			           &info->stuff.procinfo.procdata.child.status);
-			retval |= __put_user(p->utime,
-			           &info->stuff.procinfo.procdata.child.utime);
-			retval |= __put_user(p->stime,
-			           &info->stuff.procinfo.procdata.child.stime);
-			if (retval)
-				goto end_waitsys;
-
-			if (p->real_parent != p->parent) {
-				write_lock_irq(&tasklist_lock);
-				remove_parent(p);
-				p->parent = p->real_parent;
-				add_parent(p);
-				do_notify_parent(p, SIGCHLD);
-				write_unlock_irq(&tasklist_lock);
-			} else
-				release_task(p);
-			goto end_waitsys;
-		default:
-			continue;
-		}
-		tsk = next_thread(tsk);
-	}
-	read_unlock(&tasklist_lock);
-	if (flag) {
-		retval = 0;
-		if (options & W_NOHANG)
-			goto end_waitsys;
-		retval = -ERESTARTSYS;
-		if (signal_pending(current))
-			goto end_waitsys;
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		goto repeat;
-	}
-	retval = -ECHILD;
-end_waitsys:
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&current->signal->wait_chldexit, &wait);
-	put_pid(pid);
-
-	return retval;
-}
-
-struct irix5_context {
-	u32 flags;
-	u32 link;
-	u32 sigmask[4];
-	struct { u32 sp, size, flags; } stack;
-	int regs[36];
-	u32 fpregs[32];
-	u32 fpcsr;
-	u32 _unused0;
-	u32 _unused1[47];
-	u32 weird_graphics_thing;
-};
-
-asmlinkage int irix_getcontext(struct pt_regs *regs)
-{
-	int error, i, base = 0;
-	struct irix5_context __user *ctx;
-	unsigned long flags;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	ctx = (struct irix5_context __user *) regs->regs[base + 4];
-
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_getcontext(%p)\n",
-	       current->comm, current->pid, ctx);
-#endif
-
-	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
-		return -EFAULT;
-
-	error = __put_user(current->thread.irix_oldctx, &ctx->link);
-
-	error |= __copy_to_user(&ctx->sigmask, &current->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0;
-
-	/* XXX Do sigstack stuff someday... */
-	error |= __put_user(0, &ctx->stack.sp);
-	error |= __put_user(0, &ctx->stack.size);
-	error |= __put_user(0, &ctx->stack.flags);
-
-	error |= __put_user(0, &ctx->weird_graphics_thing);
-	error |= __put_user(0, &ctx->regs[0]);
-	for (i = 1; i < 32; i++)
-		error |= __put_user(regs->regs[i], &ctx->regs[i]);
-	error |= __put_user(regs->lo, &ctx->regs[32]);
-	error |= __put_user(regs->hi, &ctx->regs[33]);
-	error |= __put_user(regs->cp0_cause, &ctx->regs[34]);
-	error |= __put_user(regs->cp0_epc, &ctx->regs[35]);
-
-	flags = 0x0f;
-	if (!used_math()) {
-		flags &= ~(0x08);
-	} else {
-		/* XXX wheee... */
-		printk("Wheee, no code for saving IRIX FPU context yet.\n");
-	}
-	error |= __put_user(flags, &ctx->flags);
-
-	return error;
-}
-
-asmlinkage void irix_setcontext(struct pt_regs *regs)
-{
-	struct irix5_context __user *ctx;
-	int err, base = 0;
-	u32 flags;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	ctx = (struct irix5_context __user *) regs->regs[base + 4];
-
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_setcontext(%p)\n",
-	       current->comm, current->pid, ctx);
-#endif
-
-	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)))
-		goto segv_and_exit;
-
-	err = __get_user(flags, &ctx->flags);
-	if (flags & 0x02) {
-		/* XXX sigstack garbage, todo... */
-		printk("Wheee, cannot do sigstack stuff in setcontext\n");
-	}
-
-	if (flags & 0x04) {
-		int i;
-
-		/* XXX extra control block stuff... todo... */
-		for (i = 1; i < 32; i++)
-			err |= __get_user(regs->regs[i], &ctx->regs[i]);
-		err |= __get_user(regs->lo, &ctx->regs[32]);
-		err |= __get_user(regs->hi, &ctx->regs[33]);
-		err |= __get_user(regs->cp0_epc, &ctx->regs[35]);
-	}
-
-	if (flags & 0x08)
-		/* XXX fpu context, blah... */
-		printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n");
-
-	err |= __get_user(current->thread.irix_oldctx, &ctx->link);
-	if (err)
-		goto segv_and_exit;
-
-	/*
-	 * Don't let your children do this ...
-	 */
-	__asm__ __volatile__(
-		"move\t$29,%0\n\t"
-		"j\tsyscall_exit"
-		:/* no outputs */
-		:"r" (&regs));
-		/* Unreached */
-
-segv_and_exit:
-	force_sigsegv(SIGSEGV, current);
-}
-
-struct irix_sigstack {
-	unsigned long sp;
-	int status;
-};
-
-asmlinkage int irix_sigstack(struct irix_sigstack __user *new,
-	struct irix_sigstack __user *old)
-{
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigstack(%p,%p)\n",
-	       current->comm, current->pid, new, old);
-#endif
-	if (new) {
-		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			return -EFAULT;
-	}
-
-	if (old) {
-		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-struct irix_sigaltstack { unsigned long sp; int size; int status; };
-
-asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new,
-				struct irix_sigaltstack __user *old)
-{
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigaltstack(%p,%p)\n",
-	       current->comm, current->pid, new, old);
-#endif
-	if (new)
-		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			return -EFAULT;
-
-	if (old) {
-		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-struct irix_procset {
-	int cmd, ltype, lid, rtype, rid;
-};
-
-asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig)
-{
-	if (!access_ok(VERIFY_READ, pset, sizeof(*pset)))
-		return -EFAULT;
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n",
-	       current->comm, current->pid,
-	       pset->cmd, pset->ltype, pset->lid, pset->rtype, pset->rid,
-	       sig);
-#endif
-	return -EINVAL;
-}
diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c
index ed9febe63d72..b47e4615ec12 100644
--- a/arch/mips/kernel/irq-rm9000.c
+++ b/arch/mips/kernel/irq-rm9000.c
@@ -49,7 +49,7 @@ static void local_rm9k_perfcounter_irq_startup(void *args)
 
 static unsigned int rm9k_perfcounter_irq_startup(unsigned int irq)
 {
-	on_each_cpu(local_rm9k_perfcounter_irq_startup, (void *) irq, 0, 1);
+	on_each_cpu(local_rm9k_perfcounter_irq_startup, (void *) irq, 1);
 
 	return 0;
 }
@@ -66,7 +66,7 @@ static void local_rm9k_perfcounter_irq_shutdown(void *args)
 
 static void rm9k_perfcounter_irq_shutdown(unsigned int irq)
 {
-	on_each_cpu(local_rm9k_perfcounter_irq_shutdown, (void *) irq, 0, 1);
+	on_each_cpu(local_rm9k_perfcounter_irq_shutdown, (void *) irq, 1);
 }
 
 static struct irq_chip rm9k_irq_controller = {
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index e3309ff9ece4..6045b9a51a35 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -44,8 +44,6 @@ again:
 	return irq;
 }
 
-EXPORT_SYMBOL_GPL(allocate_irqno);
-
 /*
  * Allocate the 16 legacy interrupts for i8259 devices.  This happens early
  * in the kernel initialization so treating allocation failure as BUG() is
@@ -66,8 +64,6 @@ void free_irqno(unsigned int irq)
 	smp_mb__after_clear_bit();
 }
 
-EXPORT_SYMBOL_GPL(free_irqno);
-
 /*
  * 'what should we do if we get a hw irq event on an illegal vector'.
  * each architecture has to answer this themselves.
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 65af3cc90abb..2fefb14414b7 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -11,7 +11,6 @@
 #include <linux/file.h>
 #include <linux/smp_lock.h>
 #include <linux/highuid.h>
-#include <linux/dirent.h>
 #include <linux/resource.h>
 #include <linux/highmem.h>
 #include <linux/time.h>
@@ -129,23 +128,6 @@ out:
 	return error;
 }
 
-
-asmlinkage int sys_truncate64(const char __user *path, unsigned int high,
-			      unsigned int low)
-{
-	if ((int)high < 0)
-		return -EINVAL;
-	return sys_truncate(path, ((long) high << 32) | low);
-}
-
-asmlinkage int sys_ftruncate64(unsigned int fd, unsigned int high,
-			       unsigned int low)
-{
-	if ((int)high < 0)
-		return -EINVAL;
-	return sys_ftruncate(fd, ((long) high << 32) | low);
-}
-
 /*
  * sys_execve() executes a new program.
  */
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 640fb0cc6e39..d01665a453f5 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -4,7 +4,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/kallsyms.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/module.h>
@@ -84,9 +83,9 @@ void mips_mt_regdump(unsigned long mvpctl)
 				       read_vpe_c0_vpeconf0());
 				printk("   VPE%d.Status : %08lx\n",
 				       i, read_vpe_c0_status());
-				printk("   VPE%d.EPC : %08lx ",
-				       i, read_vpe_c0_epc());
-				print_symbol("%s\n", read_vpe_c0_epc());
+				printk("   VPE%d.EPC : %08lx %pS\n",
+				       i, read_vpe_c0_epc(),
+				       (void *) read_vpe_c0_epc());
 				printk("   VPE%d.Cause : %08lx\n",
 				       i, read_vpe_c0_cause());
 				printk("   VPE%d.Config7 : %08lx\n",
@@ -111,8 +110,8 @@ void mips_mt_regdump(unsigned long mvpctl)
 		}
 		printk("   TCStatus : %08lx\n", tcstatval);
 		printk("   TCBind : %08lx\n", read_tc_c0_tcbind());
-		printk("   TCRestart : %08lx ", read_tc_c0_tcrestart());
-		print_symbol("%s\n", read_tc_c0_tcrestart());
+		printk("   TCRestart : %08lx %pS\n",
+		       read_tc_c0_tcrestart(), (void *) read_tc_c0_tcrestart());
 		printk("   TCHalt : %08lx\n", haltval);
 		printk("   TCContext : %08lx\n", read_tc_c0_tccontext());
 		if (!haltval)
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index e7ed0ac48537..1f60e27523d9 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -22,6 +22,7 @@
 
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
+#include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 2c09a442e5e5..b16facd9ea8e 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -53,7 +53,7 @@ void __noreturn cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 			extern void smtc_idle_loop_hook(void);
@@ -125,13 +125,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	*childregs = *regs;
 	childregs->regs[7] = 0;	/* Clear error flag */
 
-#if defined(CONFIG_BINFMT_IRIX)
-	if (current->personality != PER_LINUX) {
-		/* Under IRIX things are a little different. */
-		childregs->regs[3] = 1;
-		regs->regs[3] = 0;
-	}
-#endif
 	childregs->regs[2] = 0;	/* Child gets zero as return value */
 	regs->regs[2] = p->pid;
 
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index b88f1c18ff4d..dfd868b68364 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -28,6 +28,7 @@
 #include <linux/vmalloc.h>
 #include <linux/elf.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/moduleloader.h>
 #include <linux/interrupt.h>
@@ -392,8 +393,12 @@ out:
 static int file_open(struct inode *inode, struct file *filp)
 {
 	int minor = iminor(inode);
+	int err;
 
-	return rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1);
+	lock_kernel();
+	err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1);
+	unlock_kernel();
+	return err;
 }
 
 static int file_release(struct inode *inode, struct file *filp)
@@ -517,8 +522,8 @@ static int __init rtlx_module_init(void)
 		atomic_set(&channel_wqs[i].in_open, 0);
 		mutex_init(&channel_wqs[i].mutex);
 
-		dev = device_create(mt_class, NULL, MKDEV(major, i),
-		                    "%s%d", module_name, i);
+		dev = device_create_drvdata(mt_class, NULL, MKDEV(major, i),
+					    NULL, "%s%d", module_name, i);
 		if (IS_ERR(dev)) {
 			err = PTR_ERR(dev);
 			goto out_chrdev;
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 08a9c5070ea8..fc4fd4d705e2 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -34,12 +34,8 @@ NESTED(handle_sys, PT_SIZE, sp)
 
 	lw	t1, PT_EPC(sp)		# skip syscall on return
 
-#if defined(CONFIG_BINFMT_IRIX)
-	sltiu	t0, v0, MAX_SYSCALL_NO + 1 # check syscall number
-#else
 	subu	v0, v0, __NR_O32_Linux	# check syscall number
 	sltiu	t0, v0, __NR_O32_Linux_syscalls + 1
-#endif
 	addiu	t1, 4			# skip to next instruction
 	sw	t1, PT_EPC(sp)
 	beqz	t0, illegal_syscall
@@ -264,22 +260,14 @@ bad_alignment:
 	END(sys_sysmips)
 
 	LEAF(sys_syscall)
-#if defined(CONFIG_BINFMT_IRIX)
-	sltiu	v0, a0, MAX_SYSCALL_NO + 1 # check syscall number
-#else
 	subu	t0, a0, __NR_O32_Linux	# check syscall number
 	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
-#endif
 	sll	t1, t0, 3
 	beqz	v0, einval
 
 	lw	t2, sys_call_table(t1)		# syscall routine
 
-#if defined(CONFIG_BINFMT_IRIX)
-	li	v1, 4000			# nr of sys_syscall
-#else
 	li	v1, 4000 - __NR_O32_Linux	# index of sys_syscall
-#endif
 	beq	t0, v1, einval			# do not recurse
 
 	/* Some syscalls like execve get their arguments from struct pt_regs
@@ -324,13 +312,6 @@ einval:	li	v0, -EINVAL
 	.endm
 
 	.macro	syscalltable
-#if defined(CONFIG_BINFMT_IRIX)
-	mille	sys_ni_syscall		0	/*    0 -  999 SVR4 flavour */
-	mille	sys_ni_syscall		0	/* 1000 - 1999 32-bit IRIX */
-	mille	sys_ni_syscall		0	/* 2000 - 2999 BSD43 flavour */
-	mille	sys_ni_syscall		0	/* 3000 - 3999 POSIX flavour */
-#endif
-
 	sys	sys_syscall		8	/* 4000 */
 	sys	sys_exit		1
 	sys	sys_fork		0
@@ -373,7 +354,7 @@ einval:	li	v0, -EINVAL
 	sys	sys_mkdir		2
 	sys	sys_rmdir		1	/* 4040 */
 	sys	sys_dup			1
-	sys	sys_pipe		0
+	sys	sysm_pipe		0
 	sys	sys_times		1
 	sys	sys_ni_syscall		0
 	sys	sys_brk			1	/* 4045 */
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index dc597b600c68..2b73fd1e4528 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -219,7 +219,7 @@ sys_call_table:
 	PTR	sys_readv
 	PTR	sys_writev
 	PTR	sys_access			/* 5020 */
-	PTR	sys_pipe
+	PTR	sysm_pipe
 	PTR	sys_select
 	PTR	sys_sched_yield
 	PTR	sys_mremap
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 12940eca7893..2654e75d2fef 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -141,7 +141,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_readv
 	PTR	compat_sys_writev
 	PTR	sys_access			/* 6020 */
-	PTR	sys_pipe
+	PTR	sysm_pipe
 	PTR	compat_sys_select
 	PTR	sys_sched_yield
 	PTR	sys_mremap
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 9a275efb4f04..76167bea5a70 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -247,7 +247,7 @@ sys_call_table:
 	PTR	sys_mkdir
 	PTR	sys_rmdir			/* 4040 */
 	PTR	sys_dup
-	PTR	sys_pipe
+	PTR	sysm_pipe
 	PTR	compat_sys_times
 	PTR	sys_ni_syscall
 	PTR	sys_brk				/* 4045 */
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index c6a063b2a0d9..8af84867e74d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -68,13 +68,6 @@ static char command_line[CL_SIZE];
 const unsigned long mips_io_port_base __read_mostly = -1;
 EXPORT_SYMBOL(mips_io_port_base);
 
-/*
- * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped
- * for the processor.
- */
-unsigned long isa_slot_offset;
-EXPORT_SYMBOL(isa_slot_offset);
-
 static struct resource code_resource = { .name = "Kernel code", };
 static struct resource data_resource = { .name = "Kernel data", };
 
@@ -557,11 +550,7 @@ void __init setup_arch(char **cmdline_p)
 	prom_init();
 
 #ifdef CONFIG_EARLY_PRINTK
-	{
-		extern void setup_early_printk(void);
-
-		setup_early_printk();
-	}
+	setup_early_printk();
 #endif
 	cpu_report();
 	check_bugs_early();
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index cdf87a9dd4ba..4410f172b8ab 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -131,148 +131,29 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu_idle();
 }
 
-DEFINE_SPINLOCK(smp_call_lock);
-
-struct call_data_struct *call_data;
-
-/*
- * Run a function on all other CPUs.
- *
- *  <mask>	cpuset_t of all processors to run the function on.
- *  <func>      The function to run. This must be fast and non-blocking.
- *  <info>      An arbitrary pointer to pass to the function.
- *  <retry>     If true, keep retrying until ready.
- *  <wait>      If true, wait until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until remote CPUs are nearly ready to execute <func>
- * or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler:
- *
- * CPU A                               CPU B
- * Disable interrupts
- *                                     smp_call_function()
- *                                     Take call_lock
- *                                     Send IPIs
- *                                     Wait for all cpus to acknowledge IPI
- *                                     CPU A has not responded, spin waiting
- *                                     for cpu A to respond, holding call_lock
- * smp_call_function()
- * Spin waiting for call_lock
- * Deadlock                            Deadlock
- */
-int smp_call_function_mask(cpumask_t mask, void (*func) (void *info),
-	void *info, int retry, int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct call_data_struct data;
-	int cpu = smp_processor_id();
-	int cpus;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	BUG_ON(!cpu_online(cpu));
-
-	cpu_clear(cpu, mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		return 0;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	spin_lock(&smp_call_lock);
-	call_data = &data;
-	smp_mb();
-
-	/* Send a message to all other CPUs and wait for them to respond */
 	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-	/* Wait for response */
-	/* FIXME: lock-up detection, backtrace on lock-up */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			barrier();
-	call_data = NULL;
-	spin_unlock(&smp_call_lock);
-
-	return 0;
 }
 
-int smp_call_function(void (*func) (void *info), void *info, int retry,
-	int wait)
+/*
+ * We reuse the same vector for the single IPI
+ */
+void arch_send_call_function_single_ipi(int cpu)
 {
-	return smp_call_function_mask(cpu_online_map, func, info, retry, wait);
+	mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
 }
-EXPORT_SYMBOL(smp_call_function);
 
+/*
+ * Call into both interrupt handlers, as we share the IPI for them
+ */
 void smp_call_function_interrupt(void)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function.
-	 */
-	smp_mb();
-	atomic_inc(&call_data->started);
-
-	/*
-	 * At this point the info structure may be out of scope unless wait==1.
-	 */
 	irq_enter();
-	(*func)(info);
+	generic_smp_call_function_single_interrupt();
+	generic_smp_call_function_interrupt();
 	irq_exit();
-
-	if (wait) {
-		smp_mb();
-		atomic_inc(&call_data->finished);
-	}
-}
-
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-			     int retry, int wait)
-{
-	int ret, me;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	if (!cpu_online(cpu))
-		return 0;
-
-	me = get_cpu();
-	BUG_ON(!cpu_online(me));
-
-	if (cpu == me) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-		put_cpu();
-		return 0;
-	}
-
-	ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, retry,
-				     wait);
-
-	put_cpu();
-	return 0;
 }
-EXPORT_SYMBOL(smp_call_function_single);
 
 static void stop_this_cpu(void *dummy)
 {
@@ -286,7 +167,7 @@ static void stop_this_cpu(void *dummy)
 
 void smp_send_stop(void)
 {
-	smp_call_function(stop_this_cpu, NULL, 1, 0);
+	smp_call_function(stop_this_cpu, NULL, 0);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -365,7 +246,7 @@ static void flush_tlb_all_ipi(void *info)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(flush_tlb_all_ipi, NULL, 1, 1);
+	on_each_cpu(flush_tlb_all_ipi, NULL, 1);
 }
 
 static void flush_tlb_mm_ipi(void *mm)
@@ -385,7 +266,7 @@ static void flush_tlb_mm_ipi(void *mm)
 static inline void smp_on_other_tlbs(void (*func) (void *info), void *info)
 {
 #ifndef CONFIG_MIPS_MT_SMTC
-	smp_call_function(func, info, 1, 1);
+	smp_call_function(func, info, 1);
 #endif
 }
 
@@ -485,7 +366,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 		.addr2 = end,
 	};
 
-	on_each_cpu(flush_tlb_kernel_range_ipi, &fd, 1, 1);
+	on_each_cpu(flush_tlb_kernel_range_ipi, &fd, 1);
 }
 
 static void flush_tlb_page_ipi(void *info)
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 3e863186cd22..a516286532ab 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -877,7 +877,6 @@ static void ipi_resched_interrupt(void)
 	/* Return from interrupt should be enough to cause scheduler check */
 }
 
-
 static void ipi_call_interrupt(void)
 {
 	/* Invoke generic function invocation code in smp.c */
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index ebd9db8d1ece..0632e2a849c0 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -7,6 +7,7 @@
  */
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
+#include <linux/module.h>
 #include <asm/stacktrace.h>
 
 /*
@@ -73,3 +74,4 @@ void save_stack_trace(struct stack_trace *trace)
 	prepare_frametrace(regs);
 	save_context_stack(trace, regs);
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index af1bdc897488..343015a2f418 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -40,12 +40,19 @@
 #include <asm/sysmips.h>
 #include <asm/uaccess.h>
 
-asmlinkage int sys_pipe(nabi_no_regargs volatile struct pt_regs regs)
+/*
+ * For historic reasons the pipe(2) syscall on MIPS has an unusual calling
+ * convention.  It returns results in registers $v0 / $v1 which means there
+ * is no need for it to do verify the validity of a userspace pointer
+ * argument.  Historically that used to be expensive in Linux.  These days
+ * the performance advantage is negligible.
+ */
+asmlinkage int sysm_pipe(nabi_no_regargs volatile struct pt_regs regs)
 {
 	int fd[2];
 	int error, res;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error) {
 		res = error;
 		goto out;
diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c
deleted file mode 100644
index c357762b8012..000000000000
--- a/arch/mips/kernel/sysirix.c
+++ /dev/null
@@ -1,2140 +0,0 @@
-/*
- * sysirix.c: IRIX system call emulation.
- *
- * Copyright (C) 1996 David S. Miller
- * Copyright (C) 1997 Miguel de Icaza
- * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/binfmts.h>
-#include <linux/capability.h>
-#include <linux/highuid.h>
-#include <linux/pagemap.h>
-#include <linux/mm.h>
-#include <linux/mman.h>
-#include <linux/slab.h>
-#include <linux/swap.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/times.h>
-#include <linux/elf.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/utsname.h>
-#include <linux/file.h>
-#include <linux/vfs.h>
-#include <linux/namei.h>
-#include <linux/socket.h>
-#include <linux/security.h>
-#include <linux/syscalls.h>
-#include <linux/resource.h>
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-#include <asm/inventory.h>
-
-/* 2,191 lines of complete and utter shit coming up... */
-
-extern int max_threads;
-
-/* The sysmp commands supported thus far. */
-#define MP_NPROCS       	1 /* # processor in complex */
-#define MP_NAPROCS      	2 /* # active processors in complex */
-#define MP_PGSIZE           	14 /* Return system page size in v1. */
-
-asmlinkage int irix_sysmp(struct pt_regs *regs)
-{
-	unsigned long cmd;
-	int base = 0;
-	int error = 0;
-
-	if(regs->regs[2] == 1000)
-		base = 1;
-	cmd = regs->regs[base + 4];
-	switch(cmd) {
-	case MP_PGSIZE:
-		error = PAGE_SIZE;
-		break;
-	case MP_NPROCS:
-	case MP_NAPROCS:
-		error = num_online_cpus();
-		break;
-	default:
-		printk("SYSMP[%s:%d]: Unsupported opcode %d\n",
-		       current->comm, current->pid, (int)cmd);
-		error = -EINVAL;
-		break;
-	}
-
-	return error;
-}
-
-/* The prctl commands. */
-#define PR_MAXPROCS		 1 /* Tasks/user. */
-#define PR_ISBLOCKED		 2 /* If blocked, return 1. */
-#define PR_SETSTACKSIZE		 3 /* Set largest task stack size. */
-#define PR_GETSTACKSIZE		 4 /* Get largest task stack size. */
-#define PR_MAXPPROCS		 5 /* Num parallel tasks. */
-#define PR_UNBLKONEXEC		 6 /* When task exec/exit's, unblock. */
-#define PR_SETEXITSIG		 8 /* When task exit's, set signal. */
-#define PR_RESIDENT		 9 /* Make task unswappable. */
-#define PR_ATTACHADDR		10 /* (Re-)Connect a vma to a task. */
-#define PR_DETACHADDR		11 /* Disconnect a vma from a task. */
-#define PR_TERMCHILD		12 /* Kill child if the parent dies. */
-#define PR_GETSHMASK		13 /* Get the sproc() share mask. */
-#define PR_GETNSHARE		14 /* Number of share group members. */
-#define PR_COREPID		15 /* Add task pid to name when it core. */
-#define PR_ATTACHADDRPERM	16 /* (Re-)Connect vma, with specified prot. */
-#define PR_PTHREADEXIT		17 /* Kill a pthread, only for IRIX 6.[234] */
-
-asmlinkage int irix_prctl(unsigned option, ...)
-{
-	va_list args;
-	int error = 0;
-
-	va_start(args, option);
-	switch (option) {
-	case PR_MAXPROCS:
-		printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
-		       current->comm, current->pid);
-		error = max_threads;
-		break;
-
-	case PR_ISBLOCKED: {
-		struct task_struct *task;
-
-		printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n",
-		       current->comm, current->pid);
-		read_lock(&tasklist_lock);
-		task = find_task_by_vpid(va_arg(args, pid_t));
-		error = -ESRCH;
-		if (error)
-			error = (task->run_list.next != NULL);
-		read_unlock(&tasklist_lock);
-		/* Can _your_ OS find this out that fast? */
-		break;
-	}
-
-	case PR_SETSTACKSIZE: {
-		long value = va_arg(args, long);
-
-		printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n",
-		       current->comm, current->pid, (unsigned long) value);
-		if (value > RLIM_INFINITY)
-			value = RLIM_INFINITY;
-		if (capable(CAP_SYS_ADMIN)) {
-			task_lock(current->group_leader);
-			current->signal->rlim[RLIMIT_STACK].rlim_max =
-				current->signal->rlim[RLIMIT_STACK].rlim_cur = value;
-			task_unlock(current->group_leader);
-			error = value;
-			break;
-		}
-		task_lock(current->group_leader);
-		if (value > current->signal->rlim[RLIMIT_STACK].rlim_max) {
-			error = -EINVAL;
-			task_unlock(current->group_leader);
-			break;
-		}
-		current->signal->rlim[RLIMIT_STACK].rlim_cur = value;
-		task_unlock(current->group_leader);
-		error = value;
-		break;
-	}
-
-	case PR_GETSTACKSIZE:
-		printk("irix_prctl[%s:%d]: Wants PR_GETSTACKSIZE\n",
-		       current->comm, current->pid);
-		error = current->signal->rlim[RLIMIT_STACK].rlim_cur;
-		break;
-
-	case PR_MAXPPROCS:
-		printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
-		       current->comm, current->pid);
-		error = 1;
-		break;
-
-	case PR_UNBLKONEXEC:
-		printk("irix_prctl[%s:%d]: Wants PR_UNBLKONEXEC\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_SETEXITSIG:
-		printk("irix_prctl[%s:%d]: Wants PR_SETEXITSIG\n",
-		       current->comm, current->pid);
-
-		/* We can probably play some game where we set the task
-		 * exit_code to some non-zero value when this is requested,
-		 * and check whether exit_code is already set in do_exit().
-		 */
-		error = -EINVAL;
-		break;
-
-	case PR_RESIDENT:
-		printk("irix_prctl[%s:%d]: Wants PR_RESIDENT\n",
-		       current->comm, current->pid);
-		error = 0; /* Compatibility indeed. */
-		break;
-
-	case PR_ATTACHADDR:
-		printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDR\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_DETACHADDR:
-		printk("irix_prctl[%s:%d]: Wants PR_DETACHADDR\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_TERMCHILD:
-		printk("irix_prctl[%s:%d]: Wants PR_TERMCHILD\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_GETSHMASK:
-		printk("irix_prctl[%s:%d]: Wants PR_GETSHMASK\n",
-		       current->comm, current->pid);
-		error = -EINVAL; /* Until I have the sproc() stuff in. */
-		break;
-
-	case PR_GETNSHARE:
-		error = 0;       /* Until I have the sproc() stuff in. */
-		break;
-
-	case PR_COREPID:
-		printk("irix_prctl[%s:%d]: Wants PR_COREPID\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_ATTACHADDRPERM:
-		printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDRPERM\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	default:
-		printk("irix_prctl[%s:%d]: Non-existant opcode %d\n",
-		       current->comm, current->pid, option);
-		error = -EINVAL;
-		break;
-	}
-	va_end(args);
-
-	return error;
-}
-
-#undef DEBUG_PROCGRPS
-
-extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt);
-extern char *prom_getenv(char *name);
-extern long prom_setenv(char *name, char *value);
-
-/* The syssgi commands supported thus far. */
-#define SGI_SYSID         1       /* Return unique per-machine identifier. */
-#define SGI_INVENT        5       /* Fetch inventory  */
-#   define SGI_INV_SIZEOF 1
-#   define SGI_INV_READ   2
-#define SGI_RDNAME        6       /* Return string name of a process. */
-#define SGI_SETNVRAM	  8	  /* Set PROM variable. */
-#define SGI_GETNVRAM	  9	  /* Get PROM variable. */
-#define SGI_SETPGID      21       /* Set process group id. */
-#define SGI_SYSCONF      22       /* POSIX sysconf garbage. */
-#define SGI_PATHCONF     24       /* POSIX sysconf garbage. */
-#define SGI_SETGROUPS    40       /* POSIX sysconf garbage. */
-#define SGI_GETGROUPS    41       /* POSIX sysconf garbage. */
-#define SGI_RUSAGE       56       /* BSD style rusage(). */
-#define SGI_SSYNC        62       /* Synchronous fs sync. */
-#define SGI_GETSID       65       /* SysVr4 get session id. */
-#define SGI_ELFMAP       68       /* Map an elf image. */
-#define SGI_TOSSTSAVE   108       /* Toss saved vma's. */
-#define SGI_FP_BCOPY    129       /* Should FPU bcopy be used on this machine? */
-#define SGI_PHYSP      1011       /* Translate virtual into physical page. */
-
-asmlinkage int irix_syssgi(struct pt_regs *regs)
-{
-	unsigned long cmd;
-	int retval, base = 0;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-
-	cmd = regs->regs[base + 4];
-	switch(cmd) {
-	case SGI_SYSID: {
-		char __user *buf = (char __user *) regs->regs[base + 5];
-
-		/* XXX Use ethernet addr.... */
-		retval = clear_user(buf, 64) ? -EFAULT : 0;
-		break;
-	}
-#if 0
-	case SGI_RDNAME: {
-		int pid = (int) regs->regs[base + 5];
-		char __user *buf = (char __user *) regs->regs[base + 6];
-		struct task_struct *p;
-		char tcomm[sizeof(current->comm)];
-
-		read_lock(&tasklist_lock);
-		p = find_task_by_pid(pid);
-		if (!p) {
-			read_unlock(&tasklist_lock);
-			retval = -ESRCH;
-			break;
-		}
-		get_task_comm(tcomm, p);
-		read_unlock(&tasklist_lock);
-
-		/* XXX Need to check sizes. */
-		retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0;
-		break;
-	}
-
-	case SGI_GETNVRAM: {
-		char __user *name = (char __user *) regs->regs[base+5];
-		char __user *buf = (char __user *) regs->regs[base+6];
-		char *value;
-		return -EINVAL;	/* til I fix it */
-		value = prom_getenv(name);	/* PROM lock?  */
-		if (!value) {
-			retval = -EINVAL;
-			break;
-		}
-		/* Do I strlen() for the length? */
-		retval = copy_to_user(buf, value, 128) ? -EFAULT : 0;
-		break;
-	}
-
-	case SGI_SETNVRAM: {
-		char __user *name = (char __user *) regs->regs[base+5];
-		char __user *value = (char __user *) regs->regs[base+6];
-		return -EINVAL;	/* til I fix it */
-		retval = prom_setenv(name, value);
-		/* XXX make sure retval conforms to syssgi(2) */
-		printk("[%s:%d] setnvram(\"%s\", \"%s\"): retval %d",
-		       current->comm, current->pid, name, value, retval);
-/*		if (retval == PROM_ENOENT)
-		  	retval = -ENOENT; */
-		break;
-	}
-#endif
-
-	case SGI_SETPGID: {
-#ifdef DEBUG_PROCGRPS
-		printk("[%s:%d] setpgid(%d, %d) ",
-		       current->comm, current->pid,
-		       (int) regs->regs[base + 5], (int)regs->regs[base + 6]);
-#endif
-		retval = sys_setpgid(regs->regs[base + 5], regs->regs[base + 6]);
-
-#ifdef DEBUG_PROCGRPS
-		printk("retval=%d\n", retval);
-#endif
-	}
-
-	case SGI_SYSCONF: {
-		switch(regs->regs[base + 5]) {
-		case 1:
-			retval = (MAX_ARG_PAGES >> 4); /* XXX estimate... */
-			goto out;
-		case 2:
-			retval = max_threads;
-			goto out;
-		case 3:
-			retval = HZ;
-			goto out;
-		case 4:
-			retval = NGROUPS_MAX;
-			goto out;
-		case 5:
-			retval = sysctl_nr_open;
-			goto out;
-		case 6:
-			retval = 1;
-			goto out;
-		case 7:
-			retval = 1;
-			goto out;
-		case 8:
-			retval = 199009;
-			goto out;
-		case 11:
-			retval = PAGE_SIZE;
-			goto out;
-		case 12:
-			retval = 4;
-			goto out;
-		case 25:
-		case 26:
-		case 27:
-		case 28:
-		case 29:
-		case 30:
-			retval = 0;
-			goto out;
-		case 31:
-			retval = 32;
-			goto out;
-		default:
-			retval = -EINVAL;
-			goto out;
-		};
-	}
-
-	case SGI_SETGROUPS:
-		retval = sys_setgroups((int) regs->regs[base + 5],
-		                       (gid_t __user *) regs->regs[base + 6]);
-		break;
-
-	case SGI_GETGROUPS:
-		retval = sys_getgroups((int) regs->regs[base + 5],
-		                       (gid_t __user *) regs->regs[base + 6]);
-		break;
-
-	case SGI_RUSAGE: {
-		struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6];
-
-		switch((int) regs->regs[base + 5]) {
-		case 0:
-			/* rusage self */
-			retval = getrusage(current, RUSAGE_SELF, ru);
-			goto out;
-
-		case -1:
-			/* rusage children */
-			retval = getrusage(current, RUSAGE_CHILDREN, ru);
-			goto out;
-
-		default:
-			retval = -EINVAL;
-			goto out;
-		};
-	}
-
-	case SGI_SSYNC:
-		sys_sync();
-		retval = 0;
-		break;
-
-	case SGI_GETSID:
-#ifdef DEBUG_PROCGRPS
-		printk("[%s:%d] getsid(%d) ", current->comm, current->pid,
-		       (int) regs->regs[base + 5]);
-#endif
-		retval = sys_getsid(regs->regs[base + 5]);
-#ifdef DEBUG_PROCGRPS
-		printk("retval=%d\n", retval);
-#endif
-		break;
-
-	case SGI_ELFMAP:
-		retval = irix_mapelf((int) regs->regs[base + 5],
-				     (struct elf_phdr __user *) regs->regs[base + 6],
-				     (int) regs->regs[base + 7]);
-		break;
-
-	case SGI_TOSSTSAVE:
-		/* XXX We don't need to do anything? */
-		retval = 0;
-		break;
-
-	case SGI_FP_BCOPY:
-		retval = 0;
-		break;
-
-	case SGI_PHYSP: {
-		unsigned long addr = regs->regs[base + 5];
-		int __user *pageno = (int __user *) (regs->regs[base + 6]);
-		struct mm_struct *mm = current->mm;
-		pgd_t *pgdp;
-		pud_t *pudp;
-		pmd_t *pmdp;
-		pte_t *ptep;
-
-		down_read(&mm->mmap_sem);
-		pgdp = pgd_offset(mm, addr);
-		pudp = pud_offset(pgdp, addr);
-		pmdp = pmd_offset(pudp, addr);
-		ptep = pte_offset(pmdp, addr);
-		retval = -EINVAL;
-		if (ptep) {
-			pte_t pte = *ptep;
-
-			if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) {
-				/* b0rked on 64-bit */
-				retval =  put_user((pte_val(pte) & PAGE_MASK) >>
-				                   PAGE_SHIFT, pageno);
-			}
-		}
-		up_read(&mm->mmap_sem);
-		break;
-	}
-
-	case SGI_INVENT: {
-		int  arg1    = (int)    regs->regs [base + 5];
-		void __user *buffer = (void __user *) regs->regs [base + 6];
-		int  count   = (int)    regs->regs [base + 7];
-
-		switch (arg1) {
-		case SGI_INV_SIZEOF:
-			retval = sizeof(inventory_t);
-			break;
-		case SGI_INV_READ:
-			retval = dump_inventory_to_user(buffer, count);
-			break;
-		default:
-			retval = -EINVAL;
-		}
-		break;
-	}
-
-	default:
-		printk("irix_syssgi: Unsupported command %d\n", (int)cmd);
-		retval = -EINVAL;
-		break;
-	};
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_gtime(struct pt_regs *regs)
-{
-	return get_seconds();
-}
-
-/*
- * IRIX is completely broken... it returns 0 on success, otherwise
- * ENOMEM.
- */
-asmlinkage int irix_brk(unsigned long brk)
-{
-	unsigned long rlim;
-	unsigned long newbrk, oldbrk;
-	struct mm_struct *mm = current->mm;
-	int ret;
-
-	down_write(&mm->mmap_sem);
-	if (brk < mm->end_code) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	newbrk = PAGE_ALIGN(brk);
-	oldbrk = PAGE_ALIGN(mm->brk);
-	if (oldbrk == newbrk) {
-		mm->brk = brk;
-		ret = 0;
-		goto out;
-	}
-
-	/*
-	 * Always allow shrinking brk
-	 */
-	if (brk <= mm->brk) {
-		mm->brk = brk;
-		do_munmap(mm, newbrk, oldbrk-newbrk);
-		ret = 0;
-		goto out;
-	}
-	/*
-	 * Check against rlimit and stack..
-	 */
-	rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
-	if (rlim >= RLIM_INFINITY)
-		rlim = ~0;
-	if (brk - mm->end_code > rlim) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/*
-	 * Check against existing mmap mappings.
-	 */
-	if (find_vma_intersection(mm, oldbrk, newbrk+PAGE_SIZE)) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/*
-	 * Ok, looks good - let it rip.
-	 */
-	if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	mm->brk = brk;
-	ret = 0;
-
-out:
-	up_write(&mm->mmap_sem);
-	return ret;
-}
-
-asmlinkage int irix_getpid(struct pt_regs *regs)
-{
-	regs->regs[3] = task_pid_vnr(current->real_parent);
-	return task_pid_vnr(current);
-}
-
-asmlinkage int irix_getuid(struct pt_regs *regs)
-{
-	regs->regs[3] = current->euid;
-	return current->uid;
-}
-
-asmlinkage int irix_getgid(struct pt_regs *regs)
-{
-	regs->regs[3] = current->egid;
-	return current->gid;
-}
-
-asmlinkage int irix_stime(int value)
-{
-	int err;
-	struct timespec tv;
-
-	tv.tv_sec = value;
-	tv.tv_nsec = 0;
-	err = security_settime(&tv, NULL);
-	if (err)
-		return err;
-
-	write_seqlock_irq(&xtime_lock);
-	xtime.tv_sec = value;
-	xtime.tv_nsec = 0;
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-
-	return 0;
-}
-
-static inline void jiffiestotv(unsigned long jiffies, struct timeval *value)
-{
-	value->tv_usec = (jiffies % HZ) * (1000000 / HZ);
-	value->tv_sec = jiffies / HZ;
-}
-
-static inline void getitimer_real(struct itimerval *value)
-{
-	register unsigned long val, interval;
-
-	interval = current->it_real_incr;
-	val = 0;
-	if (del_timer(&current->real_timer)) {
-		unsigned long now = jiffies;
-		val = current->real_timer.expires;
-		add_timer(&current->real_timer);
-		/* look out for negative/zero itimer.. */
-		if (val <= now)
-			val = now+1;
-		val -= now;
-	}
-	jiffiestotv(val, &value->it_value);
-	jiffiestotv(interval, &value->it_interval);
-}
-
-asmlinkage unsigned int irix_alarm(unsigned int seconds)
-{
-	return alarm_setitimer(seconds);
-}
-
-asmlinkage int irix_pause(void)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-
-	return -EINTR;
-}
-
-/* XXX need more than this... */
-asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name,
-	unsigned long flags, char __user *type, void __user *data, int datalen)
-{
-	printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n",
-	       current->comm, current->pid,
-	       dev_name, dir_name, flags, type, data, datalen);
-
-	return sys_mount(dev_name, dir_name, type, flags, data);
-}
-
-struct irix_statfs {
-	short f_type;
-	long  f_bsize, f_frsize, f_blocks, f_bfree, f_files, f_ffree;
-	char  f_fname[6], f_fpack[6];
-};
-
-asmlinkage int irix_statfs(const char __user *path,
-	struct irix_statfs __user *buf, int len, int fs_type)
-{
-	struct nameidata nd;
-	struct kstatfs kbuf;
-	int error, i;
-
-	/* We don't support this feature yet. */
-	if (fs_type) {
-		error = -EINVAL;
-		goto out;
-	}
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	error = user_path_walk(path, &nd);
-	if (error)
-		goto out;
-
-	error = vfs_statfs(nd.path.dentry, &kbuf);
-	if (error)
-		goto dput_and_out;
-
-	error = __put_user(kbuf.f_type, &buf->f_type);
-	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	for (i = 0; i < 6; i++) {
-		error |= __put_user(0, &buf->f_fname[i]);
-		error |= __put_user(0, &buf->f_fpack[i]);
-	}
-
-dput_and_out:
-	path_put(&nd.path);
-out:
-	return error;
-}
-
-asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf)
-{
-	struct kstatfs kbuf;
-	struct file *file;
-	int error, i;
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	if (!(file = fget(fd))) {
-		error = -EBADF;
-		goto out;
-	}
-
-	error = vfs_statfs(file->f_path.dentry, &kbuf);
-	if (error)
-		goto out_f;
-
-	error = __put_user(kbuf.f_type, &buf->f_type);
-	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-
-	for (i = 0; i < 6; i++) {
-		error |= __put_user(0, &buf->f_fname[i]);
-		error |= __put_user(0, &buf->f_fpack[i]);
-	}
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_setpgrp(int flags)
-{
-	int error;
-
-#ifdef DEBUG_PROCGRPS
-	printk("[%s:%d] setpgrp(%d) ", current->comm, current->pid, flags);
-#endif
-	if(!flags)
-		error = task_pgrp_vnr(current);
-	else
-		error = sys_setsid();
-#ifdef DEBUG_PROCGRPS
-	printk("returning %d\n", error);
-#endif
-
-	return error;
-}
-
-asmlinkage int irix_times(struct tms __user *tbuf)
-{
-	int err = 0;
-
-	if (tbuf) {
-		if (!access_ok(VERIFY_WRITE, tbuf, sizeof *tbuf))
-			return -EFAULT;
-
-		err = __put_user(current->utime, &tbuf->tms_utime);
-		err |= __put_user(current->stime, &tbuf->tms_stime);
-		err |= __put_user(current->signal->cutime, &tbuf->tms_cutime);
-		err |= __put_user(current->signal->cstime, &tbuf->tms_cstime);
-	}
-
-	return err;
-}
-
-asmlinkage int irix_exec(struct pt_regs *regs)
-{
-	int error, base = 0;
-	char *filename;
-
-	if(regs->regs[2] == 1000)
-		base = 1;
-	filename = getname((char __user *) (long)regs->regs[base + 4]);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-
-	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
-	                  NULL, regs);
-	putname(filename);
-
-	return error;
-}
-
-asmlinkage int irix_exece(struct pt_regs *regs)
-{
-	int error, base = 0;
-	char *filename;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	filename = getname((char __user *) (long)regs->regs[base + 4]);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
-	                  (char __user * __user *) (long)regs->regs[base + 6], regs);
-	putname(filename);
-
-	return error;
-}
-
-asmlinkage unsigned long irix_gethostid(void)
-{
-	printk("[%s:%d]: irix_gethostid() called...\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage unsigned long irix_sethostid(unsigned long val)
-{
-	printk("[%s:%d]: irix_sethostid(%08lx) called...\n",
-	       current->comm, current->pid, val);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_socket(int family, int type, int protocol)
-{
-	switch(type) {
-	case 1:
-		type = SOCK_DGRAM;
-		break;
-
-	case 2:
-		type = SOCK_STREAM;
-		break;
-
-	case 3:
-		type = 9; /* Invalid... */
-		break;
-
-	case 4:
-		type = SOCK_RAW;
-		break;
-
-	case 5:
-		type = SOCK_RDM;
-		break;
-
-	case 6:
-		type = SOCK_SEQPACKET;
-		break;
-
-	default:
-		break;
-	}
-
-	return sys_socket(family, type, protocol);
-}
-
-asmlinkage int irix_getdomainname(char __user *name, int len)
-{
-	int err;
-
-	down_read(&uts_sem);
-	if (len > __NEW_UTS_LEN)
-		len = __NEW_UTS_LEN;
-	err = copy_to_user(name, utsname()->domainname, len) ? -EFAULT : 0;
-	up_read(&uts_sem);
-
-	return err;
-}
-
-asmlinkage unsigned long irix_getpagesize(void)
-{
-	return PAGE_SIZE;
-}
-
-asmlinkage int irix_msgsys(int opcode, unsigned long arg0, unsigned long arg1,
-			   unsigned long arg2, unsigned long arg3,
-			   unsigned long arg4)
-{
-	switch (opcode) {
-	case 0:
-		return sys_msgget((key_t) arg0, (int) arg1);
-	case 1:
-		return sys_msgctl((int) arg0, (int) arg1,
-		                  (struct msqid_ds __user *)arg2);
-	case 2:
-		return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1,
-				  (size_t) arg2, (long) arg3, (int) arg4);
-	case 3:
-		return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1,
-				  (size_t) arg2, (int) arg3);
-	default:
-		return -EINVAL;
-	}
-}
-
-asmlinkage int irix_shmsys(int opcode, unsigned long arg0, unsigned long arg1,
-			   unsigned long arg2, unsigned long arg3)
-{
-	switch (opcode) {
-	case 0:
-		return do_shmat((int) arg0, (char __user *) arg1, (int) arg2,
-				 (unsigned long *) arg3);
-	case 1:
-		return sys_shmctl((int)arg0, (int)arg1,
-		                  (struct shmid_ds __user *)arg2);
-	case 2:
-		return sys_shmdt((char __user *)arg0);
-	case 3:
-		return sys_shmget((key_t) arg0, (int) arg1, (int) arg2);
-	default:
-		return -EINVAL;
-	}
-}
-
-asmlinkage int irix_semsys(int opcode, unsigned long arg0, unsigned long arg1,
-			   unsigned long arg2, int arg3)
-{
-	switch (opcode) {
-	case 0:
-		return sys_semctl((int) arg0, (int) arg1, (int) arg2,
-				  (union semun) arg3);
-	case 1:
-		return sys_semget((key_t) arg0, (int) arg1, (int) arg2);
-	case 2:
-		return sys_semop((int) arg0, (struct sembuf __user *)arg1,
-				 (unsigned int) arg2);
-	default:
-		return -EINVAL;
-	}
-}
-
-static inline loff_t llseek(struct file *file, loff_t offset, int origin)
-{
-	loff_t (*fn)(struct file *, loff_t, int);
-	loff_t retval;
-
-	fn = default_llseek;
-	if (file->f_op && file->f_op->llseek)
-	fn = file->f_op->llseek;
-	lock_kernel();
-	retval = fn(file, offset, origin);
-	unlock_kernel();
-
-	return retval;
-}
-
-asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow,
-                            int origin)
-{
-	struct file * file;
-	loff_t offset;
-	int retval;
-
-	retval = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto bad;
-	retval = -EINVAL;
-	if (origin > 2)
-		goto out_putf;
-
-	offset = llseek(file, ((loff_t) offhi << 32) | offlow, origin);
-	retval = (int) offset;
-
-out_putf:
-	fput(file);
-bad:
-	return retval;
-}
-
-asmlinkage int irix_sginap(int ticks)
-{
-	schedule_timeout_interruptible(ticks);
-	return 0;
-}
-
-asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len)
-{
-	return -EINVAL;
-}
-
-asmlinkage int irix_gettimeofday(struct timeval __user *tv)
-{
-	time_t sec;
-	long nsec, seq;
-	int err;
-
-	if (!access_ok(VERIFY_WRITE, tv, sizeof(struct timeval)))
-		return -EFAULT;
-
-	do {
-		seq = read_seqbegin(&xtime_lock);
-		sec = xtime.tv_sec;
-		nsec = xtime.tv_nsec;
-	} while (read_seqretry(&xtime_lock, seq));
-
-	err = __put_user(sec, &tv->tv_sec);
-	err |= __put_user((nsec / 1000), &tv->tv_usec);
-
-	return err;
-}
-
-#define IRIX_MAP_AUTOGROW 0x40
-
-asmlinkage unsigned long irix_mmap32(unsigned long addr, size_t len, int prot,
-				     int flags, int fd, off_t offset)
-{
-	struct file *file = NULL;
-	unsigned long retval;
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd)))
-			return -EBADF;
-
-		/* Ok, bad taste hack follows, try to think in something else
-		 * when reading this.  */
-		if (flags & IRIX_MAP_AUTOGROW) {
-			unsigned long old_pos;
-			long max_size = offset + len;
-
-			if (max_size > file->f_path.dentry->d_inode->i_size) {
-				old_pos = sys_lseek(fd, max_size - 1, 0);
-				sys_write(fd, (void __user *) "", 1);
-				sys_lseek(fd, old_pos, 0);
-			}
-		}
-	}
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	retval = do_mmap(file, addr, len, prot, flags, offset);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
-
-	return retval;
-}
-
-asmlinkage int irix_madvise(unsigned long addr, int len, int behavior)
-{
-	printk("[%s:%d] Wheee.. irix_madvise(%08lx,%d,%d)\n",
-	       current->comm, current->pid, addr, len, behavior);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_pagelock(char __user *addr, int len, int op)
-{
-	printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n",
-	       current->comm, current->pid, addr, len, op);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_quotactl(struct pt_regs *regs)
-{
-	printk("[%s:%d] Wheee.. irix_quotactl()\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_BSDsetpgrp(int pid, int pgrp)
-{
-	int error;
-
-#ifdef DEBUG_PROCGRPS
-	printk("[%s:%d] BSDsetpgrp(%d, %d) ", current->comm, current->pid,
-	       pid, pgrp);
-#endif
-	if(!pid)
-		pid = task_pid_vnr(current);
-
-	/* Wheee, weird sysv thing... */
-	if ((pgrp == 0) && (pid == task_pid_vnr(current)))
-		error = sys_setsid();
-	else
-		error = sys_setpgid(pid, pgrp);
-
-#ifdef DEBUG_PROCGRPS
-	printk("error = %d\n", error);
-#endif
-
-	return error;
-}
-
-asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt)
-{
-	printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n",
-	       current->comm, current->pid, cmd, buf, cnt);
-
-	return -EINVAL;
-}
-
-struct iuname {
-	char sysname[257], nodename[257], release[257];
-	char version[257], machine[257];
-	char m_type[257], base_rel[257];
-	char _unused0[257], _unused1[257], _unused2[257];
-	char _unused3[257], _unused4[257], _unused5[257];
-};
-
-asmlinkage int irix_uname(struct iuname __user *buf)
-{
-	down_read(&uts_sem);
-	if (copy_from_user(utsname()->sysname, buf->sysname, 65)
-	    || copy_from_user(utsname()->nodename, buf->nodename, 65)
-	    || copy_from_user(utsname()->release, buf->release, 65)
-	    || copy_from_user(utsname()->version, buf->version, 65)
-	    || copy_from_user(utsname()->machine, buf->machine, 65)) {
-		return -EFAULT;
-	}
-	up_read(&uts_sem);
-
-	return 1;
-}
-
-#undef DEBUG_XSTAT
-
-static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf)
-{
-	struct xstat32 {
-		u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid;
-		u32 st_rdev, st_pad2[2], st_size, st_pad3;
-		u32 st_atime0, st_atime1;
-		u32 st_mtime0, st_mtime1;
-		u32 st_ctime0, st_ctime1;
-		u32 st_blksize, st_blocks;
-		char st_fstype[16];
-		u32 st_pad4[8];
-	} ub;
-
-	if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-	ub.st_dev     = sysv_encode_dev(stat->dev);
-	ub.st_ino     = stat->ino;
-	ub.st_mode    = stat->mode;
-	ub.st_nlink   = stat->nlink;
-	SET_UID(ub.st_uid, stat->uid);
-	SET_GID(ub.st_gid, stat->gid);
-	ub.st_rdev    = sysv_encode_dev(stat->rdev);
-#if BITS_PER_LONG == 32
-	if (stat->size > MAX_NON_LFS)
-		return -EOVERFLOW;
-#endif
-	ub.st_size    = stat->size;
-	ub.st_atime0  = stat->atime.tv_sec;
-	ub.st_atime1  = stat->atime.tv_nsec;
-	ub.st_mtime0  = stat->mtime.tv_sec;
-	ub.st_mtime1  = stat->atime.tv_nsec;
-	ub.st_ctime0  = stat->ctime.tv_sec;
-	ub.st_ctime1  = stat->atime.tv_nsec;
-	ub.st_blksize = stat->blksize;
-	ub.st_blocks  = stat->blocks;
-	strcpy(ub.st_fstype, "efs");
-
-	return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0;
-}
-
-static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf)
-{
-	struct xstat64 {
-		u32 st_dev; s32 st_pad1[3];
-		unsigned long long st_ino;
-		u32 st_mode;
-		u32 st_nlink; s32 st_uid; s32 st_gid; u32 st_rdev;
-		s32 st_pad2[2];
-		long long st_size;
-		s32 st_pad3;
-		struct { s32 tv_sec, tv_nsec; } st_atime, st_mtime, st_ctime;
-		s32 st_blksize;
-		long long  st_blocks;
-		char st_fstype[16];
-		s32 st_pad4[8];
-	} ks;
-
-	if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-
-	ks.st_dev = sysv_encode_dev(stat->dev);
-	ks.st_pad1[0] = ks.st_pad1[1] = ks.st_pad1[2] = 0;
-	ks.st_ino = (unsigned long long) stat->ino;
-	ks.st_mode = (u32) stat->mode;
-	ks.st_nlink = (u32) stat->nlink;
-	ks.st_uid = (s32) stat->uid;
-	ks.st_gid = (s32) stat->gid;
-	ks.st_rdev = sysv_encode_dev(stat->rdev);
-	ks.st_pad2[0] = ks.st_pad2[1] = 0;
-	ks.st_size = (long long) stat->size;
-	ks.st_pad3 = 0;
-
-	/* XXX hackety hack... */
-	ks.st_atime.tv_sec = (s32) stat->atime.tv_sec;
-	ks.st_atime.tv_nsec = stat->atime.tv_nsec;
-	ks.st_mtime.tv_sec = (s32) stat->mtime.tv_sec;
-	ks.st_mtime.tv_nsec = stat->mtime.tv_nsec;
-	ks.st_ctime.tv_sec = (s32) stat->ctime.tv_sec;
-	ks.st_ctime.tv_nsec = stat->ctime.tv_nsec;
-
-	ks.st_blksize = (s32) stat->blksize;
-	ks.st_blocks = (long long) stat->blocks;
-	memset(ks.st_fstype, 0, 16);
-	ks.st_pad4[0] = ks.st_pad4[1] = ks.st_pad4[2] = ks.st_pad4[3] = 0;
-	ks.st_pad4[4] = ks.st_pad4[5] = ks.st_pad4[6] = ks.st_pad4[7] = 0;
-
-	/* Now write it all back. */
-	return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0;
-}
-
-asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf)
-{
-	int retval;
-	struct kstat stat;
-
-#ifdef DEBUG_XSTAT
-	printk("[%s:%d] Wheee.. irix_xstat(%d,%s,%p) ",
-	       current->comm, current->pid, version, filename, statbuf);
-#endif
-
-	retval = vfs_stat(filename, &stat);
-	if (!retval) {
-		switch(version) {
-			case 2:
-				retval = irix_xstat32_xlate(&stat, statbuf);
-				break;
-			case 3:
-				retval = irix_xstat64_xlate(&stat, statbuf);
-				break;
-			default:
-				retval = -EINVAL;
-		}
-	}
-	return retval;
-}
-
-asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf)
-{
-	int error;
-	struct kstat stat;
-
-#ifdef DEBUG_XSTAT
-	printk("[%s:%d] Wheee.. irix_lxstat(%d,%s,%p) ",
-	       current->comm, current->pid, version, filename, statbuf);
-#endif
-
-	error = vfs_lstat(filename, &stat);
-
-	if (!error) {
-		switch (version) {
-			case 2:
-				error = irix_xstat32_xlate(&stat, statbuf);
-				break;
-			case 3:
-				error = irix_xstat64_xlate(&stat, statbuf);
-				break;
-			default:
-				error = -EINVAL;
-		}
-	}
-	return error;
-}
-
-asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf)
-{
-	int error;
-	struct kstat stat;
-
-#ifdef DEBUG_XSTAT
-	printk("[%s:%d] Wheee.. irix_fxstat(%d,%d,%p) ",
-	       current->comm, current->pid, version, fd, statbuf);
-#endif
-
-	error = vfs_fstat(fd, &stat);
-	if (!error) {
-		switch (version) {
-			case 2:
-				error = irix_xstat32_xlate(&stat, statbuf);
-				break;
-			case 3:
-				error = irix_xstat64_xlate(&stat, statbuf);
-				break;
-			default:
-				error = -EINVAL;
-		}
-	}
-	return error;
-}
-
-asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev)
-{
-	int retval;
-	printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n",
-	       current->comm, current->pid, ver, filename, mode, dev);
-
-	switch(ver) {
-	case 2:
-		/* shouldn't we convert here as well as on stat()? */
-		retval = sys_mknod(filename, mode, dev);
-		break;
-
-	default:
-		retval = -EINVAL;
-		break;
-	};
-
-	return retval;
-}
-
-asmlinkage int irix_swapctl(int cmd, char __user *arg)
-{
-	printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n",
-	       current->comm, current->pid, cmd, arg);
-
-	return -EINVAL;
-}
-
-struct irix_statvfs {
-	u32 f_bsize; u32 f_frsize; u32 f_blocks;
-	u32 f_bfree; u32 f_bavail; u32 f_files; u32 f_ffree; u32 f_favail;
-	u32 f_fsid; char f_basetype[16];
-	u32 f_flag; u32 f_namemax;
-	char	f_fstr[32]; u32 f_filler[16];
-};
-
-asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
-{
-	struct nameidata nd;
-	struct kstatfs kbuf;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n",
-	       current->comm, current->pid, fname, buf);
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
-		return -EFAULT;
-
-	error = user_path_walk(fname, &nd);
-	if (error)
-		goto out;
-	error = vfs_statfs(nd.path.dentry, &kbuf);
-	if (error)
-		goto dput_and_out;
-
-	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for (i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	for (i = 0; i < 32; i++)
-		error |= __put_user(0, &buf->f_fstr[i]);
-
-dput_and_out:
-	path_put(&nd.path);
-out:
-	return error;
-}
-
-asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf)
-{
-	struct kstatfs kbuf;
-	struct file *file;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n",
-	       current->comm, current->pid, fd, buf);
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
-		return -EFAULT;
-
-	if (!(file = fget(fd))) {
-		error = -EBADF;
-		goto out;
-	}
-	error = vfs_statfs(file->f_path.dentry, &kbuf);
-	if (error)
-		goto out_f;
-
-	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for(i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_priocntl(struct pt_regs *regs)
-{
-	printk("[%s:%d] Wheee.. irix_priocntl()\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_sigqueue(int pid, int sig, int code, int val)
-{
-	printk("[%s:%d] Wheee.. irix_sigqueue(%d,%d,%d,%d)\n",
-	       current->comm, current->pid, pid, sig, code, val);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2)
-{
-	int retval;
-
-	if (size1) {
-		retval = -EINVAL;
-		goto out;
-	}
-	retval = sys_truncate(name, size2);
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_ftruncate64(int fd, int pad, int size1, int size2)
-{
-	int retval;
-
-	if (size1) {
-		retval = -EINVAL;
-		goto out;
-	}
-	retval = sys_ftruncate(fd, size2);
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_mmap64(struct pt_regs *regs)
-{
-	int len, prot, flags, fd, off1, off2, error, base = 0;
-	unsigned long addr, pgoff, *sp;
-	struct file *file = NULL;
-	int err;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	sp = (unsigned long *) (regs->regs[29] + 16);
-	addr = regs->regs[base + 4];
-	len = regs->regs[base + 5];
-	prot = regs->regs[base + 6];
-	if (!base) {
-		flags = regs->regs[base + 7];
-		if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long))))
-			return -EFAULT;
-		fd = sp[0];
-		err = __get_user(off1, &sp[1]);
-		err |= __get_user(off2, &sp[2]);
-	} else {
-		if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long))))
-			return -EFAULT;
-		err = __get_user(flags, &sp[0]);
-		err |= __get_user(fd, &sp[1]);
-		err |= __get_user(off1, &sp[2]);
-		err |= __get_user(off2, &sp[3]);
-	}
-
-	if (err)
-		return err;
-
-	if (off1 & PAGE_MASK)
-		return -EOVERFLOW;
-
-	pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT);
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd)))
-			return -EBADF;
-
-		/* Ok, bad taste hack follows, try to think in something else
-		   when reading this */
-		if (flags & IRIX_MAP_AUTOGROW) {
-			unsigned long old_pos;
-			long max_size = off2 + len;
-
-			if (max_size > file->f_path.dentry->d_inode->i_size) {
-				old_pos = sys_lseek(fd, max_size - 1, 0);
-				sys_write(fd, (void __user *) "", 1);
-				sys_lseek(fd, old_pos, 0);
-			}
-		}
-	}
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-
-	return error;
-}
-
-asmlinkage int irix_dmi(struct pt_regs *regs)
-{
-	printk("[%s:%d] Wheee.. irix_dmi()\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64,
-			  int off1, int off2)
-{
-	printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n",
-	       current->comm, current->pid, fd, buf, cnt, off64, off1, off2);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64,
-			   int off1, int off2)
-{
-	printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n",
-	       current->comm, current->pid, fd, buf, cnt, off64, off1, off2);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_sgifastpath(int cmd, unsigned long arg0, unsigned long arg1,
-				unsigned long arg2, unsigned long arg3,
-				unsigned long arg4, unsigned long arg5)
-{
-	printk("[%s:%d] Wheee.. irix_fastpath(%d,%08lx,%08lx,%08lx,%08lx,"
-	       "%08lx,%08lx)\n",
-	       current->comm, current->pid, cmd, arg0, arg1, arg2,
-	       arg3, arg4, arg5);
-
-	return -EINVAL;
-}
-
-struct irix_statvfs64 {
-	u32  f_bsize; u32 f_frsize;
-	u64  f_blocks; u64 f_bfree; u64 f_bavail;
-	u64  f_files; u64 f_ffree; u64 f_favail;
-	u32  f_fsid;
-	char f_basetype[16];
-	u32  f_flag; u32 f_namemax;
-	char f_fstr[32];
-	u32  f_filler[16];
-};
-
-asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf)
-{
-	struct nameidata nd;
-	struct kstatfs kbuf;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_statvfs64(%s,%p)\n",
-	       current->comm, current->pid, fname, buf);
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs64))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	error = user_path_walk(fname, &nd);
-	if (error)
-		goto out;
-	error = vfs_statfs(nd.path.dentry, &kbuf);
-	if (error)
-		goto dput_and_out;
-
-	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for(i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	for(i = 0; i < 32; i++)
-		error |= __put_user(0, &buf->f_fstr[i]);
-
-dput_and_out:
-	path_put(&nd.path);
-out:
-	return error;
-}
-
-asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf)
-{
-	struct kstatfs kbuf;
-	struct file *file;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_fstatvfs64(%d,%p)\n",
-	       current->comm, current->pid, fd, buf);
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
-		error = -EFAULT;
-		goto out;
-	}
-	if (!(file = fget(fd))) {
-		error = -EBADF;
-		goto out;
-	}
-	error = vfs_statfs(file->f_path.dentry, &kbuf);
-	if (error)
-		goto out_f;
-
-	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for(i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf)
-{
-	int err;
-
-	printk("[%s:%d] irix_getmountid(%s, %p)\n",
-	       current->comm, current->pid, fname, midbuf);
-	if (!access_ok(VERIFY_WRITE, midbuf, (sizeof(unsigned long) * 4)))
-		return -EFAULT;
-
-	/*
-	 * The idea with this system call is that when trying to determine
-	 * 'pwd' and it's a toss-up for some reason, userland can use the
-	 * fsid of the filesystem to try and make the right decision, but
-	 * we don't have this so for now. XXX
-	 */
-	err = __put_user(0, &midbuf[0]);
-	err |= __put_user(0, &midbuf[1]);
-	err |= __put_user(0, &midbuf[2]);
-	err |= __put_user(0, &midbuf[3]);
-
-	return err;
-}
-
-asmlinkage int irix_nsproc(unsigned long entry, unsigned long mask,
-			   unsigned long arg, unsigned long sp, int slen)
-{
-	printk("[%s:%d] Wheee.. irix_nsproc(%08lx,%08lx,%08lx,%08lx,%d)\n",
-	       current->comm, current->pid, entry, mask, arg, sp, slen);
-
-	return -EINVAL;
-}
-
-#undef DEBUG_GETDENTS
-
-struct irix_dirent32 {
-	u32  d_ino;
-	u32  d_off;
-	unsigned short  d_reclen;
-	char d_name[1];
-};
-
-struct irix_dirent32_callback {
-	struct irix_dirent32 __user *current_dir;
-	struct irix_dirent32 __user *previous;
-	int count;
-	int error;
-};
-
-#define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de)))
-#define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1))
-
-static int irix_filldir32(void *__buf, const char *name,
-	int namlen, loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct irix_dirent32 __user *dirent;
-	struct irix_dirent32_callback *buf = __buf;
-	unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1);
-	int err = 0;
-	u32 d_ino;
-
-#ifdef DEBUG_GETDENTS
-	printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]",
-	       reclen, namlen, buf->count);
-#endif
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	dirent = buf->previous;
-	if (dirent)
-		err = __put_user(offset, &dirent->d_off);
-	dirent = buf->current_dir;
-	err |= __put_user(dirent, &buf->previous);
-	err |= __put_user(d_ino, &dirent->d_ino);
-	err |= __put_user(reclen, &dirent->d_reclen);
-	err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0;
-	err |= __put_user(0, &dirent->d_name[namlen]);
-	dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen);
-
-	buf->current_dir = dirent;
-	buf->count -= reclen;
-
-	return err;
-}
-
-asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent,
-	unsigned int count, int __user *eob)
-{
-	struct file *file;
-	struct irix_dirent32 __user *lastdirent;
-	struct irix_dirent32_callback buf;
-	int error;
-
-#ifdef DEBUG_GETDENTS
-	printk("[%s:%d] ngetdents(%d, %p, %d, %p) ", current->comm,
-	       current->pid, fd, dirent, count, eob);
-#endif
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.current_dir = (struct irix_dirent32 __user *) dirent;
-	buf.previous = NULL;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, irix_filldir32, &buf);
-	if (error < 0)
-		goto out_putf;
-
-	error = buf.error;
-	lastdirent = buf.previous;
-	if (lastdirent) {
-		put_user(file->f_pos, &lastdirent->d_off);
-		error = count - buf.count;
-	}
-
-	if (put_user(0, eob) < 0) {
-		error = -EFAULT;
-		goto out_putf;
-	}
-
-#ifdef DEBUG_GETDENTS
-	printk("eob=%d returning %d\n", *eob, count - buf.count);
-#endif
-	error = count - buf.count;
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-struct irix_dirent64 {
-	u64            d_ino;
-	u64            d_off;
-	unsigned short d_reclen;
-	char           d_name[1];
-};
-
-struct irix_dirent64_callback {
-	struct irix_dirent64 __user *curr;
-	struct irix_dirent64 __user *previous;
-	int count;
-	int error;
-};
-
-#define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de)))
-#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
-
-static int irix_filldir64(void *__buf, const char *name,
-	int namlen, loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct irix_dirent64 __user *dirent;
-	struct irix_dirent64_callback * buf = __buf;
-	unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1);
-	int err = 0;
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf)))
-		return -EFAULT;
-
-	if (__put_user(-EINVAL, &buf->error))	/* only used if we fail.. */
-		return -EFAULT;
-	if (reclen > buf->count)
-		return -EINVAL;
-	dirent = buf->previous;
-	if (dirent)
-		err = __put_user(offset, &dirent->d_off);
-	dirent = buf->curr;
-	buf->previous = dirent;
-	err |= __put_user(ino, &dirent->d_ino);
-	err |= __put_user(reclen, &dirent->d_reclen);
-	err |= __copy_to_user((char __user *)dirent->d_name, name, namlen)
-	       ? -EFAULT : 0;
-	err |= __put_user(0, &dirent->d_name[namlen]);
-
-	dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen);
-
-	buf->curr = dirent;
-	buf->count -= reclen;
-
-	return err;
-}
-
-asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt)
-{
-	struct file *file;
-	struct irix_dirent64 __user *lastdirent;
-	struct irix_dirent64_callback buf;
-	int error;
-
-#ifdef DEBUG_GETDENTS
-	printk("[%s:%d] getdents64(%d, %p, %d) ", current->comm,
-	       current->pid, fd, dirent, cnt);
-#endif
-	error = -EBADF;
-	if (!(file = fget(fd)))
-		goto out;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, cnt))
-		goto out_f;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct irix_dirent64) + 255))
-		goto out_f;
-
-	buf.curr = (struct irix_dirent64 __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-	error = vfs_readdir(file, irix_filldir64, &buf);
-	if (error < 0)
-		goto out_f;
-	lastdirent = buf.previous;
-	if (!lastdirent) {
-		error = buf.error;
-		goto out_f;
-	}
-	if (put_user(file->f_pos, &lastdirent->d_off))
-		return -EFAULT;
-#ifdef DEBUG_GETDENTS
-	printk("returning %d\n", cnt - buf.count);
-#endif
-	error = cnt - buf.count;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob)
-{
-	struct file *file;
-	struct irix_dirent64 __user *lastdirent;
-	struct irix_dirent64_callback buf;
-	int error;
-
-#ifdef DEBUG_GETDENTS
-	printk("[%s:%d] ngetdents64(%d, %p, %d) ", current->comm,
-	       current->pid, fd, dirent, cnt);
-#endif
-	error = -EBADF;
-	if (!(file = fget(fd)))
-		goto out;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, cnt) ||
-	    !access_ok(VERIFY_WRITE, eob, sizeof(*eob)))
-		goto out_f;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct irix_dirent64) + 255))
-		goto out_f;
-
-	*eob = 0;
-	buf.curr = (struct irix_dirent64 __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-	error = vfs_readdir(file, irix_filldir64, &buf);
-	if (error < 0)
-		goto out_f;
-	lastdirent = buf.previous;
-	if (!lastdirent) {
-		error = buf.error;
-		goto out_f;
-	}
-	if (put_user(file->f_pos, &lastdirent->d_off))
-		return -EFAULT;
-#ifdef DEBUG_GETDENTS
-	printk("eob=%d returning %d\n", *eob, cnt - buf.count);
-#endif
-	error = cnt - buf.count;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_uadmin(unsigned long op, unsigned long func, unsigned long arg)
-{
-	int retval;
-
-	switch (op) {
-	case 1:
-		/* Reboot */
-		printk("[%s:%d] irix_uadmin: Wants to reboot...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 2:
-		/* Shutdown */
-		printk("[%s:%d] irix_uadmin: Wants to shutdown...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 4:
-		/* Remount-root */
-		printk("[%s:%d] irix_uadmin: Wants to remount root...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 8:
-		/* Kill all tasks. */
-		printk("[%s:%d] irix_uadmin: Wants to kill all tasks...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 256:
-		/* Set magic mushrooms... */
-		printk("[%s:%d] irix_uadmin: Wants to set magic mushroom[%d]...\n",
-		       current->comm, current->pid, (int) func);
-		retval = -EINVAL;
-		goto out;
-
-	default:
-		printk("[%s:%d] irix_uadmin: Unknown operation [%d]...\n",
-		       current->comm, current->pid, (int) op);
-		retval = -EINVAL;
-		goto out;
-	};
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf)
-{
-	int retval;
-
-	switch(type) {
-	case 0:
-		/* uname() */
-		retval = irix_uname((struct iuname __user *)inbuf);
-		goto out;
-
-	case 2:
-		/* ustat() */
-		printk("[%s:%d] irix_utssys: Wants to do ustat()\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 3:
-		/* fusers() */
-		printk("[%s:%d] irix_utssys: Wants to do fusers()\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	default:
-		printk("[%s:%d] irix_utssys: Wants to do unknown type[%d]\n",
-		       current->comm, current->pid, (int) type);
-		retval = -EINVAL;
-		goto out;
-	}
-
-out:
-	return retval;
-}
-
-#undef DEBUG_FCNTL
-
-#define IRIX_F_ALLOCSP 10
-
-asmlinkage int irix_fcntl(int fd, int cmd, int arg)
-{
-	int retval;
-
-#ifdef DEBUG_FCNTL
-	printk("[%s:%d] irix_fcntl(%d, %d, %d) ", current->comm,
-	       current->pid, fd, cmd, arg);
-#endif
-	if (cmd == IRIX_F_ALLOCSP){
-		return 0;
-	}
-	retval = sys_fcntl(fd, cmd, arg);
-#ifdef DEBUG_FCNTL
-	printk("%d\n", retval);
-#endif
-	return retval;
-}
-
-asmlinkage int irix_ulimit(int cmd, int arg)
-{
-	int retval;
-
-	switch(cmd) {
-	case 1:
-		printk("[%s:%d] irix_ulimit: Wants to get file size limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 2:
-		printk("[%s:%d] irix_ulimit: Wants to set file size limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 3:
-		printk("[%s:%d] irix_ulimit: Wants to get brk limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 4:
-#if 0
-		printk("[%s:%d] irix_ulimit: Wants to get fd limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-#endif
-		retval = current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-		goto out;
-
-	case 5:
-		printk("[%s:%d] irix_ulimit: Wants to get txt offset.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	default:
-		printk("[%s:%d] irix_ulimit: Unknown command [%d].\n",
-		       current->comm, current->pid, cmd);
-		retval = -EINVAL;
-		goto out;
-	}
-out:
-	return retval;
-}
-
-asmlinkage int irix_unimp(struct pt_regs *regs)
-{
-	printk("irix_unimp [%s:%d] v0=%d v1=%d a0=%08lx a1=%08lx a2=%08lx "
-	       "a3=%08lx\n", current->comm, current->pid,
-	       (int) regs->regs[2], (int) regs->regs[3],
-	       regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]);
-
-	return -ENOSYS;
-}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index f9165d1a17bf..b8ea4e9d0d87 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -71,7 +71,6 @@ extern asmlinkage void handle_reserved(void);
 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_struct *ctx, int has_fpu);
 
-void (*board_watchpoint_handler)(struct pt_regs *regs);
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
 void (*board_nmi_handler_setup)(void);
@@ -249,11 +248,11 @@ static void __show_regs(const struct pt_regs *regs)
 	/*
 	 * Saved cp0 registers
 	 */
-	printk("epc   : %0*lx ", field, regs->cp0_epc);
-	print_symbol("%s ", regs->cp0_epc);
+	printk("epc   : %0*lx %pS\n", field, regs->cp0_epc,
+	       (void *) regs->cp0_epc);
 	printk("    %s\n", print_tainted());
-	printk("ra    : %0*lx ", field, regs->regs[31]);
-	print_symbol("%s\n", regs->regs[31]);
+	printk("ra    : %0*lx %pS\n", field, regs->regs[31],
+	       (void *) regs->regs[31]);
 
 	printk("Status: %08x    ", (uint32_t) regs->cp0_status);
 
@@ -892,11 +891,6 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
 
 asmlinkage void do_watch(struct pt_regs *regs)
 {
-	if (board_watchpoint_handler) {
-		(*board_watchpoint_handler)(regs);
-		return;
-	}
-
 	/*
 	 * We use the watch exception where available to detect stack
 	 * overflows.
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 2794501ff302..972b2d2b8401 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -38,6 +38,7 @@
 #include <linux/vmalloc.h>
 #include <linux/elf.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/moduleloader.h>
 #include <linux/interrupt.h>
@@ -1050,17 +1051,20 @@ static int vpe_open(struct inode *inode, struct file *filp)
 	enum vpe_state state;
 	struct vpe_notifications *not;
 	struct vpe *v;
-	int ret;
+	int ret, err = 0;
 
+	lock_kernel();
 	if (minor != iminor(inode)) {
 		/* assume only 1 device at the moment. */
 		printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
-		return -ENODEV;
+		err = -ENODEV;
+		goto out;
 	}
 
 	if ((v = get_vpe(tclimit)) == NULL) {
 		printk(KERN_WARNING "VPE loader: unable to get vpe\n");
-		return -ENODEV;
+		err = -ENODEV;
+		goto out;
 	}
 
 	state = xchg(&v->state, VPE_STATE_INUSE);
@@ -1100,6 +1104,8 @@ static int vpe_open(struct inode *inode, struct file *filp)
 	v->shared_ptr = NULL;
 	v->__start = 0;
 
+out:
+	unlock_kernel();
 	return 0;
 }
 
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index a56c15026965..d1ac7a25c856 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -22,8 +22,8 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/bootinfo.h>
 #include <asm/irq_cpu.h>
+#include <asm/lasat/lasat.h>
 #include <asm/lasat/lasatint.h>
 
 #include <irq.h>
@@ -112,23 +112,18 @@ void __init arch_init_irq(void)
 {
 	int i;
 
-	switch (mips_machtype) {
-	case MACH_LASAT_100:
-		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
-		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
-		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
-		get_int_status = get_int_status_100;
-		*lasat_int_mask = 0;
-		break;
-	case MACH_LASAT_200:
+	if (IS_LASAT_200()) {
 		lasat_int_status = (void *)LASAT_INT_STATUS_REG_200;
 		lasat_int_mask = (void *)LASAT_INT_MASK_REG_200;
 		lasat_int_mask_shift = LASATINT_MASK_SHIFT_200;
 		get_int_status = get_int_status_200;
 		*lasat_int_mask &= 0xffff;
-		break;
-	default:
-		panic("arch_init_irq: mips_machtype incorrect");
+	} else {
+		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
+		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
+		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
+		get_int_status = get_int_status_100;
+		*lasat_int_mask = 0;
 	}
 
 	mips_cpu_irq_init();
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
index 31e328b3814d..577bb463a871 100644
--- a/arch/mips/lasat/lasat_board.c
+++ b/arch/mips/lasat/lasat_board.c
@@ -24,7 +24,6 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/mutex.h>
-#include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 #include "at93c.h"
 /* New model description table */
@@ -66,7 +65,7 @@ static void init_flash_sizes(void)
 	ls[LASAT_MTD_SERVICE] = 0xC0000;
 	ls[LASAT_MTD_NORMAL] = 0x100000;
 
-	if (mips_machtype == MACH_LASAT_100) {
+	if (!IS_LASAT_200()) {
 		lasat_board_info.li_flash_base = 0x1e000000;
 
 		lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
index 209edcc26f07..6acc6cb85f0a 100644
--- a/arch/mips/lasat/prom.c
+++ b/arch/mips/lasat/prom.c
@@ -86,18 +86,16 @@ void __init prom_init(void)
 
 	setup_prom_vectors();
 
-	if (current_cpu_data.cputype == CPU_R5000) {
+	if (IS_LASAT_200()) {
 		printk(KERN_INFO "LASAT 200 board\n");
-		mips_machtype = MACH_LASAT_200;
 		lasat_ndelay_divider = LASAT_200_DIVIDER;
+		at93c = &at93c_defs[1];
 	} else {
 		printk(KERN_INFO "LASAT 100 board\n");
-		mips_machtype = MACH_LASAT_100;
 		lasat_ndelay_divider = LASAT_100_DIVIDER;
+		at93c = &at93c_defs[0];
 	}
 
-	at93c = &at93c_defs[mips_machtype];
-
 	lasat_init_board_info();		/* Read info from EEPROM */
 
 	/* Get the command line */
diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c
index 205bd397d75b..5bcb6e89ab78 100644
--- a/arch/mips/lasat/serial.c
+++ b/arch/mips/lasat/serial.c
@@ -23,7 +23,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/bootinfo.h>
 #include <asm/lasat/lasat.h>
 #include <asm/lasat/serial.h>
 
@@ -47,7 +46,7 @@ static __init int lasat_uart_add(void)
 	if (!pdev)
 		return -ENOMEM;
 
-	if (mips_machtype == MACH_LASAT_100) {
+	if (!IS_LASAT_200()) {
 		lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100);
 		lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1;
 		lasat_serial_res[0].flags = IORESOURCE_MEM;
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index e072da4ff3b3..dbd3163a85c2 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -127,9 +127,11 @@ void __init plat_time_init(void)
 void __init plat_mem_setup(void)
 {
 	int i;
-	lasat_misc  = &lasat_misc_info[mips_machtype];
+	int lasat_type = IS_LASAT_200() ? 1 : 0;
+
+	lasat_misc  = &lasat_misc_info[lasat_type];
 #ifdef CONFIG_PICVUE
-	picvue = &pvc_defs[mips_machtype];
+	picvue = &pvc_defs[lasat_type];
 #endif
 
 	/* Set up panic notifier */
@@ -140,7 +142,7 @@ void __init plat_mem_setup(void)
 	lasat_reboot_setup();
 
 #ifdef CONFIG_DS1603
-	ds1603 = &ds_defs[mips_machtype];
+	ds1603 = &ds_defs[lasat_type];
 #endif
 
 #ifdef DYNAMIC_SERIAL_INIT
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index ed49ef01ac53..52e6c58c8de1 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -24,6 +24,7 @@
 #include <asm/signal.h>
 #include <asm/uaccess.h>
 
+#include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
 
 #define SIGNALLING_NAN 0x7ff800007ff80000LL
diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile
deleted file mode 100644
index f71c2dd1041a..000000000000
--- a/arch/mips/mips-boards/atlas/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-
-obj-y			:= atlas_int.o atlas_setup.o
-obj-$(CONFIG_KGDB)	+= atlas_gdb.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/atlas/atlas_gdb.c b/arch/mips/mips-boards/atlas/atlas_gdb.c
deleted file mode 100644
index 00c98cff62dc..000000000000
--- a/arch/mips/mips-boards/atlas/atlas_gdb.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <asm/io.h>
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/saa9730_uart.h>
-
-#define INB(a)     inb((unsigned long)a)
-#define OUTB(x, a)  outb(x, (unsigned long)a)
-
-/*
- * This is the interface to the remote debugger stub
- * if the Philips part is used for the debug port,
- * called from the platform setup code.
- */
-void *saa9730_base = (void *)ATLAS_SAA9730_REG;
-
-static int saa9730_kgdb_active = 0;
-
-#define SAA9730_BAUDCLOCK(baud) (((ATLAS_SAA9730_BAUDCLOCK/(baud))/16)-1)
-
-int saa9730_kgdb_hook(int speed)
-{
-	int baudclock;
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-
-        /*
-         * Clear all interrupts
-         */
-	(void) INB(&kgdb_uart->Lsr);
-	(void) INB(&kgdb_uart->Msr);
-	(void) INB(&kgdb_uart->Thr_Rbr);
-	(void) INB(&kgdb_uart->Iir_Fcr);
-
-        /*
-         * Now, initialize the UART
-         */
-	/* 8 data bits, one stop bit, no parity */
-	OUTB(SAA9730_LCR_DATA8, &kgdb_uart->Lcr);
-
-	baudclock = SAA9730_BAUDCLOCK(speed);
-
-	OUTB((baudclock >> 16) & 0xff, &kgdb_uart->BaudDivMsb);
-	OUTB( baudclock        & 0xff, &kgdb_uart->BaudDivLsb);
-
-	/* Set RTS/DTR active */
-	OUTB(SAA9730_MCR_DTR | SAA9730_MCR_RTS, &kgdb_uart->Mcr);
-	saa9730_kgdb_active = 1;
-
-	return speed;
-}
-
-int saa9730_putDebugChar(char c)
-{
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-
-        if (!saa9730_kgdb_active) {     /* need to init device first */
-                return 0;
-        }
-
-        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_THRE))
-                ;
-	OUTB(c, &kgdb_uart->Thr_Rbr);
-
-        return 1;
-}
-
-char saa9730_getDebugChar(void)
-{
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-	char c;
-
-        if (!saa9730_kgdb_active) {     /* need to init device first */
-                return 0;
-        }
-        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_DR))
-                ;
-
-	c = INB(&kgdb_uart->Thr_Rbr);
-	return(c);
-}
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
deleted file mode 100644
index 6fb29c3ff62d..000000000000
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 1999, 2000, 2006  MIPS Technologies, Inc.
- *	All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Atlas board.
- *
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/kernel.h>
-
-#include <asm/gdb-stub.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/msc01_ic.h>
-
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-#include <asm/mips-boards/generic.h>
-
-static struct atlas_ictrl_regs *atlas_hw0_icregs;
-
-#if 0
-#define DEBUG_INT(x...) printk(x)
-#else
-#define DEBUG_INT(x...)
-#endif
-
-void disable_atlas_irq(unsigned int irq_nr)
-{
-	atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE);
-	iob();
-}
-
-void enable_atlas_irq(unsigned int irq_nr)
-{
-	atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE);
-	iob();
-}
-
-static void end_atlas_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_atlas_irq(irq);
-}
-
-static struct irq_chip atlas_irq_type = {
-	.name = "Atlas",
-	.ack = disable_atlas_irq,
-	.mask = disable_atlas_irq,
-	.mask_ack = disable_atlas_irq,
-	.unmask = enable_atlas_irq,
-	.eoi = enable_atlas_irq,
-	.end = end_atlas_irq,
-};
-
-static inline int ls1bit32(unsigned int x)
-{
-	int b = 31, s;
-
-	s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
-	s =  8; if (x <<  8 == 0) s = 0; b -= s; x <<= s;
-	s =  4; if (x <<  4 == 0) s = 0; b -= s; x <<= s;
-	s =  2; if (x <<  2 == 0) s = 0; b -= s; x <<= s;
-	s =  1; if (x <<  1 == 0) s = 0; b -= s;
-
-	return b;
-}
-
-static inline void atlas_hw0_irqdispatch(void)
-{
-	unsigned long int_status;
-	int irq;
-
-	int_status = atlas_hw0_icregs->intstatus;
-
-	/* if int_status == 0, then the interrupt has already been cleared */
-	if (unlikely(int_status == 0))
-		return;
-
-	irq = ATLAS_INT_BASE + ls1bit32(int_status);
-
-	DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq);
-
-	do_IRQ(irq);
-}
-
-static inline int clz(unsigned long x)
-{
-	__asm__(
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = s0 & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0x8000;
-	t0 = t0 < 1;
-	//t0 = t0 << 2;
-	a0 = a0 - t0;
-	//s0 = s0 << t0;
-
-	return a0;
-#endif
-}
-
-/*
- * IRQs on the Atlas board look basically like (all external interrupt
- * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)):
- *
- *      MIPS IRQ        Source
- *      --------        ------
- *             0        Software 0 (reschedule IPI on MT)
- *             1        Software 1 (remote call IPI on MT)
- *             2        Combined Atlas hardware interrupt (hw0)
- *             3        Hardware (ignored)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Software 0
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq == MIPSCPU_INT_ATLAS)
-		atlas_hw0_irqdispatch();
-	else if (irq >= 0)
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-static inline void init_atlas_irqs(int base)
-{
-	int i;
-
-	atlas_hw0_icregs = (struct atlas_ictrl_regs *)
-			   ioremap(ATLAS_ICTRL_REGS_BASE,
-				   sizeof(struct atlas_ictrl_regs *));
-
-	/*
-	 * Mask out all interrupt by writing "1" to all bit position in
-	 * the interrupt reset reg.
-	 */
-	atlas_hw0_icregs->intrsten = 0xffffffff;
-
-	for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++)
-		set_irq_chip_and_handler(i, &atlas_irq_type, handle_level_irq);
-}
-
-static struct irqaction atlasirq = {
-	.handler = no_action,
-	.name = "Atlas cascade"
-};
-
-msc_irqmap_t __initdata msc_irqmap[] = {
-	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-};
-int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
-
-msc_irqmap_t __initdata msc_eicirqmap[] = {
-	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_ATLAS,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01E_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
-};
-int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
-
-void __init arch_init_irq(void)
-{
-	init_atlas_irqs(ATLAS_INT_BASE);
-
-	if (!cpu_has_veic)
-		mips_cpu_irq_init();
-
-	switch(mips_revision_corid) {
-	case MIPS_REVISION_CORID_CORE_MSC:
-	case MIPS_REVISION_CORID_CORE_FPGA2:
-	case MIPS_REVISION_CORID_CORE_FPGA3:
-	case MIPS_REVISION_CORID_CORE_FPGA4:
-	case MIPS_REVISION_CORID_CORE_24K:
-	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
-		if (cpu_has_veic)
-			init_msc_irqs(MSC01E_INT_BASE, MSC01E_INT_BASE,
-				      msc_eicirqmap, msc_nr_eicirqs);
-		else
-			init_msc_irqs(MSC01E_INT_BASE, MSC01C_INT_BASE,
-				      msc_irqmap, msc_nr_irqs);
-	}
-
-	if (cpu_has_veic) {
-		set_vi_handler(MSC01E_INT_ATLAS, atlas_hw0_irqdispatch);
-		setup_irq(MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq);
-	} else if (cpu_has_vint) {
-		set_vi_handler(MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch);
-#ifdef CONFIG_MIPS_MT_SMTC
-		setup_irq_smtc(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS,
-			       &atlasirq, (0x100 << MIPSCPU_INT_ATLAS));
-#else /* Not SMTC */
-		setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
-#endif /* CONFIG_MIPS_MT_SMTC */
-	} else
-		setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
-}
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
deleted file mode 100644
index 5c500802271e..000000000000
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-#include <asm/time.h>
-#include <asm/traps.h>
-
-static void __init serial_init(void);
-
-const char *get_system_type(void)
-{
-	return "MIPS Atlas";
-}
-
-const char display_string[] = "        LINUX ON ATLAS       ";
-
-void __init plat_mem_setup(void)
-{
-	mips_pcibios_init();
-
-	ioport_resource.end = 0x7fffffff;
-
-	serial_init();
-
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-	mips_reboot_setup();
-}
-
-static void __init serial_init(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port s;
-
-	memset(&s, 0, sizeof(s));
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	s.iobase = ATLAS_UART_REGS_BASE;
-#else
-	s.iobase = ATLAS_UART_REGS_BASE+3;
-#endif
-	s.irq = ATLAS_INT_UART;
-	s.uartclk = ATLAS_BASE_BAUD * 16;
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
-	s.iotype = UPIO_PORT;
-	s.regshift = 3;
-
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial setup failed!\n");
-	}
-#endif
-}
diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile
deleted file mode 100644
index f7f87fc09d1e..000000000000
--- a/arch/mips/mips-boards/generic/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# Makefile for the MIPS boards generic routines under Linux.
-#
-
-obj-y				:= reset.o display.o init.o memory.o \
-				   cmdline.o time.o
-obj-y				+= amon.o
-
-obj-$(CONFIG_EARLY_PRINTK)	+= console.o
-obj-$(CONFIG_PCI)		+= pci.o
-obj-$(CONFIG_KGDB)		+= gdb_hook.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
deleted file mode 100644
index db4ad654a6d3..000000000000
--- a/arch/mips/mips-boards/malta/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# Makefile for the MIPS Malta specific kernel interface routines
-# under Linux.
-#
-
-obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o
-
-# FIXME FIXME FIXME
-obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile
deleted file mode 100644
index 3682fe217bd5..000000000000
--- a/arch/mips/mips-boards/sead/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
-#
-# ########################################################################
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# #######################################################################
-#
-# Makefile for the MIPS SEAD specific kernel interface routines
-# under Linux.
-#
-
-obj-y		:= sead_int.o sead_setup.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
deleted file mode 100644
index ec6dd194c14a..000000000000
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2004  Maciej W. Rozycki
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Sead board.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/mips-boards/seadint.h>
-
-static inline int clz(unsigned long x)
-{
-	__asm__(
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = s0 & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0x8000;
-	t0 = t0 < 1;
-	//t0 = t0 << 2;
-	a0 = a0 - t0;
-	//s0 = s0 << t0;
-
-	return a0;
-#endif
-}
-
-/*
- * IRQs on the SEAD board look basically are combined together on hardware
- * interrupt 0 (MIPS IRQ 2)) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        UART0 (hw0)
- *             3        UART1 (hw1)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq >= 0)
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
-	mips_cpu_irq_init();
-}
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
deleted file mode 100644
index 8aa8e5b7b074..000000000000
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * SEAD specific setup.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/sead.h>
-#include <asm/mips-boards/seadint.h>
-#include <asm/time.h>
-
-static void __init serial_init(void);
-
-const char *get_system_type(void)
-{
-	return "MIPS SEAD";
-}
-
-const char display_string[] = "        LINUX ON SEAD       ";
-
-void __init plat_mem_setup(void)
-{
-	ioport_resource.end = 0x7fffffff;
-
-	serial_init();
-
-	mips_reboot_setup();
-}
-
-static void __init serial_init(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port s;
-
-	memset(&s, 0, sizeof(s));
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	s.iobase = SEAD_UART0_REGS_BASE;
-#else
-	s.iobase = SEAD_UART0_REGS_BASE+3;
-#endif
-	s.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_UART0;
-	s.uartclk = SEAD_BASE_BAUD * 16;
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
-	s.iotype = UPIO_PORT;
-	s.regshift = 3;
-
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial setup failed!\n");
-	}
-#endif
-}
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 48731020ca0e..44e8dd8106bf 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,8 +3,7 @@
 #
 
 obj-y				+= cache.o dma-default.o extable.o fault.o \
-				   init.o pgtable.o tlbex.o tlbex-fault.o \
-				   uasm.o page.o
+				   init.o tlbex.o tlbex-fault.o uasm.o page.o
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 27096751ddce..71df3390c07b 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -43,12 +43,12 @@
  *    primary cache.
  */
 static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
-                                   int retry, int wait)
+                                   int wait)
 {
 	preempt_disable();
 
 #if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
-	smp_call_function(func, info, retry, wait);
+	smp_call_function(func, info, wait);
 #endif
 	func(info);
 	preempt_enable();
@@ -350,7 +350,7 @@ static inline void local_r4k___flush_cache_all(void * args)
 
 static void r4k___flush_cache_all(void)
 {
-	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
+	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1);
 }
 
 static inline int has_valid_asid(const struct mm_struct *mm)
@@ -397,7 +397,7 @@ static void r4k_flush_cache_range(struct vm_area_struct *vma,
 	int exec = vma->vm_flags & VM_EXEC;
 
 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc))
-		r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
+		r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1);
 }
 
 static inline void local_r4k_flush_cache_mm(void * args)
@@ -429,7 +429,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
 	if (!cpu_has_dc_aliases)
 		return;
 
-	r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1);
 }
 
 struct flush_cache_page_args {
@@ -521,7 +521,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma,
 	args.addr = addr;
 	args.pfn = pfn;
 
-	r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1);
 }
 
 static inline void local_r4k_flush_data_cache_page(void * addr)
@@ -535,7 +535,7 @@ static void r4k_flush_data_cache_page(unsigned long addr)
 		local_r4k_flush_data_cache_page((void *)addr);
 	else
 		r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr,
-			        1, 1);
+			        1);
 }
 
 struct flush_icache_range_args {
@@ -571,7 +571,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;
 
-	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
 	instruction_hazard();
 }
 
@@ -672,7 +672,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg)
 
 static void r4k_flush_cache_sigtramp(unsigned long addr)
 {
-	r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1);
 }
 
 static void r4k_flush_icache_all(void)
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index ae39dd88b9aa..891312f8e5a6 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -348,7 +348,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 
 EXPORT_SYMBOL(dma_sync_sg_for_device);
 
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c
deleted file mode 100644
index 7dfa579ab24c..000000000000
--- a/arch/mips/mm/pgtable.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-
-void show_mem(void)
-{
-#ifndef CONFIG_NEED_MULTIPLE_NODES  /* XXX(hch): later.. */
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		if (!pfn_valid(pfn))
-			continue;
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			highmem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n", highmem);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-#endif
-}
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 1655aa69e133..f467199676a8 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -396,7 +396,7 @@ int __cpuinit uasm_in_compat_space_p(long addr)
 #endif
 }
 
-int __cpuinit uasm_rel_highest(long val)
+static int __cpuinit uasm_rel_highest(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000;
@@ -405,7 +405,7 @@ int __cpuinit uasm_rel_highest(long val)
 #endif
 }
 
-int __cpuinit uasm_rel_higher(long val)
+static int __cpuinit uasm_rel_higher(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000;
diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h
index 0d6a66f32030..c6d1e3dd82d4 100644
--- a/arch/mips/mm/uasm.h
+++ b/arch/mips/mm/uasm.h
@@ -103,8 +103,6 @@ struct uasm_label {
 void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
 #ifdef CONFIG_64BIT
 int uasm_in_compat_space_p(long addr);
-int uasm_rel_highest(long val);
-int uasm_rel_higher(long val);
 #endif
 int uasm_rel_hi(long val);
 int uasm_rel_lo(long val);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
new file mode 100644
index 000000000000..f8064446e812
--- /dev/null
+++ b/arch/mips/mti-malta/Makefile
@@ -0,0 +1,21 @@
+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+#
+# Copyright (C) 2008 Wind River Systems, Inc.
+#   written by Ralf Baechle <ralf@linux-mips.org>
+#
+obj-y				:= malta-amon.o malta-cmdline.o \
+				   malta-display.o malta-init.o malta-int.o \
+				   malta-memory.o malta-mtd.o \
+				   malta-platform.o malta-reset.o \
+				   malta-setup.o malta-time.o
+
+obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
+obj-$(CONFIG_PCI)		+= malta-pci.o
+obj-$(CONFIG_KGDB)		+= malta-kgdb.o
+
+# FIXME FIXME FIXME
+obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mti-malta/malta-amon.c
index 96236bf33838..96236bf33838 100644
--- a/arch/mips/mips-boards/generic/amon.c
+++ b/arch/mips/mti-malta/malta-amon.c
diff --git a/arch/mips/mips-boards/generic/cmdline.c b/arch/mips/mti-malta/malta-cmdline.c
index 1871c30ed2eb..1871c30ed2eb 100644
--- a/arch/mips/mips-boards/generic/cmdline.c
+++ b/arch/mips/mti-malta/malta-cmdline.c
diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mti-malta/malta-console.c
index 4d8ab99e4155..43bcfb4f8167 100644
--- a/arch/mips/mips-boards/generic/console.c
+++ b/arch/mips/mti-malta/malta-console.c
@@ -22,30 +22,9 @@
 #include <linux/serial_reg.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlas.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define PORT(offset) (ATLAS_UART_REGS_BASE     + ((offset)<<3))
-#else
-#define PORT(offset) (ATLAS_UART_REGS_BASE + 3 + ((offset)<<3))
-#endif
-
-#elif defined(CONFIG_MIPS_SEAD)
-
-#include <asm/mips-boards/sead.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define PORT(offset) (SEAD_UART0_REGS_BASE     + ((offset)<<3))
-#else
-#define PORT(offset) (SEAD_UART0_REGS_BASE + 3 + ((offset)<<3))
-#endif
-
-#else
 
 #define PORT(offset) (0x3f8 + (offset))
 
-#endif
 
 static inline unsigned int serial_in(int offset)
 {
diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mti-malta/malta-display.c
index 2a0057cfc30d..7c8828fcb0ad 100644
--- a/arch/mips/mips-boards/generic/display.c
+++ b/arch/mips/mti-malta/malta-display.c
@@ -22,6 +22,7 @@
 #include <linux/timer.h>
 #include <asm/io.h>
 #include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
 
 extern const char display_string[];
 static unsigned int display_count;
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mti-malta/malta-init.c
index 83b9dc739203..c0653021a171 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -197,14 +197,6 @@ void __init kgdb_config(void)
 			while ((c = *++argptr) && ('0' <= c && c <= '9'))
 				speed = speed * 10 + c - '0';
 		}
-#ifdef CONFIG_MIPS_ATLAS
-		if (line == 1) {
-			speed = saa9730_kgdb_hook(speed);
-			generic_putDebugChar = saa9730_putDebugChar;
-			generic_getDebugChar = saa9730_getDebugChar;
-		}
-		else
-#endif
 		{
 			speed = rs_kgdb_hook(line, speed);
 			generic_putDebugChar = rs_putDebugChar;
@@ -260,9 +252,6 @@ void __init prom_init(void)
 
 	mips_display_message("LINUX");
 
-#ifdef CONFIG_MIPS_SEAD
-	set_io_port_base(KSEG1);
-#else
 	/*
 	 * early setup of _pcictrl_bonito so that we can determine
 	 * the system controller on a CORE_EMUL board
@@ -414,7 +403,6 @@ void __init prom_init(void)
 		mips_display_message("SC Error");
 		while (1);   /* We die here... */
 	}
-#endif
 	board_nmi_handler_setup = mips_nmi_setup;
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mti-malta/malta-int.c
index 8c495104b321..ea176113fea9 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -363,6 +363,7 @@ static msc_irqmap_t __initdata msc_eicirqmap[] = {
 
 static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
 
+#if defined(CONFIG_MIPS_MT_SMP)
 /*
  * This GIC specific tabular array defines the association between External
  * Interrupts and CPUs/Core Interrupts. The nature of the External
@@ -394,11 +395,12 @@ static struct gic_intr_map gic_intr_map[] = {
 	{ GIC_EXT_INTR(22), 	3,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
 	{ GIC_EXT_INTR(23), 	3,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
 };
+#endif
 
 /*
  * GCMP needs to be detected before any SMP initialisation
  */
-int __init gcmp_probe(unsigned long addr, unsigned long size)
+static int __init gcmp_probe(unsigned long addr, unsigned long size)
 {
 	if (gcmp_present >= 0)
 		return gcmp_present;
@@ -412,7 +414,8 @@ int __init gcmp_probe(unsigned long addr, unsigned long size)
 	return gcmp_present;
 }
 
-void __init fill_ipi_map(void)
+#if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map(void)
 {
 	int i;
 
@@ -422,6 +425,7 @@ void __init fill_ipi_map(void)
 				(1 << (gic_intr_map[i].pin + 2));
 	}
 }
+#endif
 
 void __init arch_init_irq(void)
 {
@@ -527,7 +531,6 @@ void __init arch_init_irq(void)
 				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE3
 			}
 		};
-#define NIPI (sizeof(ipiirq)/sizeof(ipiirq[0]))
 		fill_ipi_map();
 		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
 		if (!gcmp_present) {
@@ -549,7 +552,7 @@ void __init arch_init_irq(void)
 		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
 		write_c0_status(0x1100dc00);
 		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
-		for (i = 0; i < NIPI; i++) {
+		for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
 			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
 			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
 
diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mti-malta/malta-kgdb.c
index 6a1854de4579..6a1854de4579 100644
--- a/arch/mips/mips-boards/generic/gdb_hook.c
+++ b/arch/mips/mti-malta/malta-kgdb.c
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mti-malta/malta-memory.c
index 5e443bba5662..61888ff72c87 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -97,7 +97,6 @@ static struct prom_pmemblock * __init prom_getmdesc(void)
 	mdesc[1].base = 0x00001000;
 	mdesc[1].size = 0x000ef000;
 
-#ifdef CONFIG_MIPS_MALTA
 	/*
 	 * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
 	 * south bridge and PCI access always forwarded to the ISA Bus and
@@ -108,11 +107,6 @@ static struct prom_pmemblock * __init prom_getmdesc(void)
 	mdesc[2].type = yamon_dontuse;
 	mdesc[2].base = 0x000f0000;
 	mdesc[2].size = 0x00010000;
-#else
-	mdesc[2].type = yamon_prom;
-	mdesc[2].base = 0x000f0000;
-	mdesc[2].size = 0x00010000;
-#endif
 
 	mdesc[3].type = yamon_dontuse;
 	mdesc[3].base = 0x00100000;
diff --git a/arch/mips/mips-boards/malta/malta_mtd.c b/arch/mips/mti-malta/malta-mtd.c
index 8ad9bdf25dce..8ad9bdf25dce 100644
--- a/arch/mips/mips-boards/malta/malta_mtd.c
+++ b/arch/mips/mti-malta/malta-mtd.c
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mti-malta/malta-pci.c
index b9743190609a..b9743190609a 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
diff --git a/arch/mips/mips-boards/malta/malta_platform.c b/arch/mips/mti-malta/malta-platform.c
index 83b9bab3cd3f..83b9bab3cd3f 100644
--- a/arch/mips/mips-boards/malta/malta_platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mti-malta/malta-reset.c
index 583d468d98a9..42dee4da37ba 100644
--- a/arch/mips/mips-boards/generic/reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -27,15 +27,9 @@
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/mips-boards/generic.h>
-#if defined(CONFIG_MIPS_ATLAS)
-#include <asm/mips-boards/atlas.h>
-#endif
 
 static void mips_machine_restart(char *command);
 static void mips_machine_halt(void);
-#if defined(CONFIG_MIPS_ATLAS)
-static void atlas_machine_power_off(void);
-#endif
 
 static void mips_machine_restart(char *command)
 {
@@ -53,23 +47,10 @@ static void mips_machine_halt(void)
 	__raw_writel(GORESET, softres_reg);
 }
 
-#if defined(CONFIG_MIPS_ATLAS)
-static void atlas_machine_power_off(void)
-{
-	unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int));
-
-	writew(ATLAS_GOSTBY, psustby_reg);
-}
-#endif
 
 void mips_reboot_setup(void)
 {
 	_machine_restart = mips_machine_restart;
 	_machine_halt = mips_machine_halt;
-#if defined(CONFIG_MIPS_ATLAS)
-	pm_power_off = atlas_machine_power_off;
-#endif
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
 	pm_power_off = mips_machine_halt;
-#endif
 }
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mti-malta/malta-setup.c
index e7cad54936ca..e7cad54936ca 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
diff --git a/arch/mips/mips-boards/malta/malta_smtc.c b/arch/mips/mti-malta/malta-smtc.c
index 5ea705e49454..5ea705e49454 100644
--- a/arch/mips/mips-boards/malta/malta_smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mti-malta/malta-time.c
index fe2cac1b4514..0b97d47691fc 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -42,15 +42,7 @@
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
 
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlasint.h>
-#endif
-#ifdef CONFIG_MIPS_MALTA
 #include <asm/mips-boards/maltaint.h>
-#endif
-#ifdef CONFIG_MIPS_SEAD
-#include <asm/mips-boards/seadint.h>
-#endif
 
 unsigned long cpu_khz;
 
@@ -76,20 +68,6 @@ static unsigned int __init estimate_cpu_frequency(void)
 	unsigned int prid = read_c0_prid() & 0xffff00;
 	unsigned int count;
 
-#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM)
-	/*
-	 * The SEAD board doesn't have a real time clock, so we can't
-	 * really calculate the timer frequency
-	 * For now we hardwire the SEAD board frequency to 12MHz.
-	 */
-
-	if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
-	    (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
-		count = 12000000;
-	else
-		count = 6000000;
-#endif
-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA)
 	unsigned long flags;
 	unsigned int start;
 
@@ -110,7 +88,6 @@ static unsigned int __init estimate_cpu_frequency(void)
 
 	/* restore interrupts */
 	local_irq_restore(flags);
-#endif
 
 	mips_hpt_frequency = count;
 	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/nxp/pnx8550/common/platform.c
index c7c763dbe588..21d2955359b3 100644
--- a/arch/mips/nxp/pnx8550/common/platform.c
+++ b/arch/mips/nxp/pnx8550/common/platform.c
@@ -13,6 +13,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/resource.h>
@@ -91,16 +92,16 @@ struct pnx8xxx_port pnx8xxx_ports[] = {
 };
 
 /* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
+static u64 ohci_dmamask = DMA_32BIT_MASK;
 
-static u64 uart_dmamask = ~(u32)0;
+static u64 uart_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device pnx8550_usb_ohci_device = {
 	.name		= "pnx8550-ohci",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(pnx8550_usb_ohci_resources),
 	.resource	= pnx8550_usb_ohci_resources,
@@ -111,7 +112,7 @@ static struct platform_device pnx8550_uart_device = {
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &uart_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 		.platform_data = pnx8xxx_ports,
 	},
 	.num_resources	= ARRAY_SIZE(pnx8550_uart_resources),
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index b5f6f71b27bc..dd2fbd6645c1 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -27,7 +27,7 @@ static int op_mips_setup(void)
 	model->reg_setup(ctr);
 
 	/* Configure the registers on all cpus.  */
-	on_each_cpu(model->cpu_setup, NULL, 0, 1);
+	on_each_cpu(model->cpu_setup, NULL, 1);
 
         return 0;
 }
@@ -58,7 +58,7 @@ static int op_mips_create_files(struct super_block * sb, struct dentry * root)
 
 static int op_mips_start(void)
 {
-	on_each_cpu(model->cpu_start, NULL, 0, 1);
+	on_each_cpu(model->cpu_start, NULL, 1);
 
 	return 0;
 }
@@ -66,7 +66,7 @@ static int op_mips_start(void)
 static void op_mips_stop(void)
 {
 	/* Disable performance monitoring for all counters.  */
-	on_each_cpu(model->cpu_stop, NULL, 0, 1);
+	on_each_cpu(model->cpu_stop, NULL, 1);
 }
 
 int __init oprofile_arch_init(struct oprofile_operations *ops)
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index b40df7d2cf44..54759f1669d3 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -313,7 +313,7 @@ static int __init mipsxx_init(void)
 	if (!cpu_has_mipsmt_pertccounters)
 		counters = counters_total_to_per_cpu(counters);
 #endif
-	on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
+	on_each_cpu(reset_counters, (void *)(long)counters, 1);
 
 	op_model_mipsxx_ops.num_counters = counters;
 	switch (current_cpu_type()) {
@@ -382,7 +382,7 @@ static void mipsxx_exit(void)
 	int counters = op_model_mipsxx_ops.num_counters;
 
 	counters = counters_per_cpu_to_total(counters);
-	on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
+	on_each_cpu(reset_counters, (void *)(long)counters, 1);
 
 	perf_irq = save_perf_irq;
 }
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index ed0c07622baa..15e01aec37fd 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -11,17 +11,16 @@ obj-$(CONFIG_MIPS_BONITO64)	+= ops-bonito64.o
 obj-$(CONFIG_PCI_GT64XXX_PCI0)	+= ops-gt64xxx_pci0.o
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
-obj-$(CONFIG_MIPS_TX3927)	+= ops-tx3927.o
+obj-$(CONFIG_SOC_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
-obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
 obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
 #
 obj-$(CONFIG_BASLER_EXCITE)	+= ops-titan.o pci-excite.o fixup-excite.o
 obj-$(CONFIG_LASAT)		+= pci-lasat.o
-obj-$(CONFIG_MIPS_ATLAS)	+= fixup-atlas.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
@@ -42,9 +41,12 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
 obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
-obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o pci-jmr3927.o
-obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o ops-tx4927.o
-obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-tx4938.o ops-tx4938.o
+obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o
+obj-$(CONFIG_SOC_TX4927)	+= pci-tx4927.o
+obj-$(CONFIG_SOC_TX4938)	+= pci-tx4938.o
+obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o
+obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-rbtx4938.o
 obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
+obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
deleted file mode 100644
index 506e883a8c71..000000000000
--- a/arch/mips/pci/fixup-atlas.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2003, 2004  Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
- *	Author:	 Maciej W. Rozycki <macro@mips.com>
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/mips-boards/atlasint.h>
-
-#define PCIA		ATLAS_INT_PCIA
-#define PCIB		ATLAS_INT_PCIB
-#define PCIC		ATLAS_INT_PCIC
-#define PCID		ATLAS_INT_PCID
-#define INTA		ATLAS_INT_INTA
-#define INTB		ATLAS_INT_INTB
-#define ETH		ATLAS_INT_ETH
-#define INTC		ATLAS_INT_INTC
-#define SCSI		ATLAS_INT_SCSI
-#define INTD		ATLAS_INT_INTD
-
-static char irq_tab[][5] __initdata = {
-	/*      INTA    INTB    INTC    INTD */
-	{0,	0,	0,	0,	0 },	/*  0: Unused */
-	{0,	0,	0,	0,	0 },	/*  1: Unused */
-	{0,	0,	0,	0,	0 },	/*  2: Unused */
-	{0,	0,	0,	0,	0 },	/*  3: Unused */
-	{0,	0,	0,	0,	0 },	/*  4: Unused */
-	{0,	0,	0,	0,	0 },	/*  5: Unused */
-	{0,	0,	0,	0,	0 },	/*  6: Unused */
-	{0,	0,	0,	0,	0 },	/*  7: Unused */
-	{0,	0,	0,	0,	0 },	/*  8: Unused */
-	{0,	0,	0,	0,	0 },	/*  9: Unused */
-	{0,	0,	0,	0,	0 },	/* 10: Unused */
-	{0,	0,	0,	0,	0 },	/* 11: Unused */
-	{0,	0,	0,	0,	0 },	/* 12: Unused */
-	{0,	0,	0,	0,	0 },	/* 13: Unused */
-	{0,	0,	0,	0,	0 },	/* 14: Unused */
-	{0,	PCIA,	PCIB,	PCIC,	PCID },	/* 15: cPCI (behind 21150) */
-	{0,	SCSI,	0,	0,	0 },	/* 16: SYM53C810A SCSI */
-	{0,	0,	0,	0,	0 },	/* 17: Core */
-	{0,	INTA,	INTB,	INTC,	INTD },	/* 18: PCI Slot */
-	{0,	ETH,	0,	0,	0 },	/* 19: SAA9730 Eth. et al. */
-	{0,	0,	0,	0,	0 },	/* 20: Unused */
-	{0,	0,	0,	0,	0 }	/* 21: Unused */
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return irq_tab[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-#ifdef CONFIG_KGDB
-/*
- * The PCI scan may have moved the saa9730 I/O address, so reread
- * the address here.
- * This does mean that it's not possible to debug the PCI bus configuration
- * code, but it is better than nothing...
- */
-
-static void atlas_saa9730_base_fixup(struct pci_dev *pdev)
-{
-	extern void *saa9730_base;
-	if (pdev->bus == 0 && PCI_SLOT(pdev->devfn) == 19)
-		(void) pci_read_config_dword(pdev, 0x14, (u32 *)&saa9730_base);
-	printk("saa9730_base = %x\n", saa9730_base);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730,
-	 atlas_saa9730_base_fixup);
-
-#endif
diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c
index e974394be7bc..0f1069527cba 100644
--- a/arch/mips/pci/fixup-jmr3927.c
+++ b/arch/mips/pci/fixup-jmr3927.c
@@ -28,36 +28,31 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/jmr3927.h>
 
-#include <asm/jmr3927/jmr3927.h>
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char irq = pin;
 
-	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
-	if (dev->vendor == PCI_VENDOR_ID_EFAR &&
-	    dev->device == PCI_DEVICE_ID_EFAR_SLC90E66_1)
-		return irq;
 	/* IRQ rotation (PICMG) */
 	irq--;			/* 0-3 */
-	if (dev->bus->parent == NULL &&
-	    slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) {
+	if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) {
 		/* PCI CardSlot (IDSEL=A23, DevNu=12) */
 		/* PCIA => PCIC (IDSEL=A23) */
 		/* NOTE: JMR3927 JP1 must be set to OPEN */
 		irq = (irq + 2) % 4;
-	} else if (dev->bus->parent == NULL &&
-		   slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) {
+	} else if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) {
 		/* PCI CardSlot (IDSEL=A22, DevNu=11) */
 		/* PCIA => PCIA (IDSEL=A22) */
 		/* NOTE: JMR3927 JP1 must be set to OPEN */
 		irq = (irq + 0) % 4;
 	} else {
 		/* PCI Backplane */
-		irq = (irq + 3 + slot) % 4;
+		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
+			irq = (irq + 33 - slot) % 4;
+		else
+			irq = (irq + 3 + slot) % 4;
 	}
 	irq++;			/* 1-4 */
 
@@ -66,15 +61,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 		irq = JMR3927_IRQ_IOC_PCIA;
 		break;
 	case 2:
-		// wrong for backplane irq = JMR3927_IRQ_IOC_PCIB;
-		irq = JMR3927_IRQ_IOC_PCID;
+		irq = JMR3927_IRQ_IOC_PCIB;
 		break;
 	case 3:
 		irq = JMR3927_IRQ_IOC_PCIC;
 		break;
 	case 4:
-		// wrong for backplane irq = JMR3927_IRQ_IOC_PCID;
-		irq = JMR3927_IRQ_IOC_PCIB;
+		irq = JMR3927_IRQ_IOC_PCID;
 		break;
 	}
 
@@ -84,9 +77,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 		irq = JMR3927_IRQ_ETHER0;
 	return irq;
 }
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c
index 7450c335b387..321db265829c 100644
--- a/arch/mips/pci/fixup-rbtx4927.c
+++ b/arch/mips/pci/fixup-rbtx4927.c
@@ -33,108 +33,41 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4927.h>
 
-#include <asm/tx4927/tx4927.h>
-#include <asm/tx4927/tx4927_pci.h>
-
-#undef  DEBUG
-#ifdef  DEBUG
-#define DBG(x...)       printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/* look up table for backplane pci irq for slots 17-20 by pin # */
-static unsigned char backplane_pci_irq[4][4] = {
-	/* PJ6 SLOT:  17, PIN: 1 */ {TX4927_IRQ_IOC_PCIA,
-				     /* PJ6 SLOT:  17, PIN: 2 */
-				     TX4927_IRQ_IOC_PCIB,
-				     /* PJ6 SLOT:  17, PIN: 3 */
-				     TX4927_IRQ_IOC_PCIC,
-				     /* PJ6 SLOT:  17, PIN: 4 */
-				     TX4927_IRQ_IOC_PCID},
-	/* SB  SLOT:  18, PIN: 1 */ {TX4927_IRQ_IOC_PCIB,
-				     /* SB  SLOT:  18, PIN: 2 */
-				     TX4927_IRQ_IOC_PCIC,
-				     /* SB  SLOT:  18, PIN: 3 */
-				     TX4927_IRQ_IOC_PCID,
-				     /* SB  SLOT:  18, PIN: 4 */
-				     TX4927_IRQ_IOC_PCIA},
-	/* PJ5 SLOT:  19, PIN: 1 */ {TX4927_IRQ_IOC_PCIC,
-				     /* PJ5 SLOT:  19, PIN: 2 */
-				     TX4927_IRQ_IOC_PCID,
-				     /* PJ5 SLOT:  19, PIN: 3 */
-				     TX4927_IRQ_IOC_PCIA,
-				     /* PJ5 SLOT:  19, PIN: 4 */
-				     TX4927_IRQ_IOC_PCIB},
-	/* PJ4 SLOT:  20, PIN: 1 */ {TX4927_IRQ_IOC_PCID,
-				     /* PJ4 SLOT:  20, PIN: 2 */
-				     TX4927_IRQ_IOC_PCIA,
-				     /* PJ4 SLOT:  20, PIN: 3 */
-				     TX4927_IRQ_IOC_PCIB,
-				     /* PJ4 SLOT:  20, PIN: 4 */
-				     TX4927_IRQ_IOC_PCIC}
-};
-
-static int pci_get_irq(const struct pci_dev *dev, int pin)
+int __init rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char irq = pin;
 
-	DBG("pci_get_irq: pin is %d\n", pin);
 	/* IRQ rotation */
 	irq--;			/* 0-3 */
-	if (dev->bus->parent == NULL &&
-	    PCI_SLOT(dev->devfn) == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
-		printk("Onboard PCI_SLOT(dev->devfn) is %d\n",
-		       PCI_SLOT(dev->devfn));
-		/* IDSEL=A23 is tx4927 onboard pci slot */
-		irq = (irq + PCI_SLOT(dev->devfn)) % 4;
-		irq++;		/* 1-4 */
-		DBG("irq is now %d\n", irq);
-
-		switch (irq) {
-		case 1:
-			irq = TX4927_IRQ_IOC_PCIA;
-			break;
-		case 2:
-			irq = TX4927_IRQ_IOC_PCIB;
-			break;
-		case 3:
-			irq = TX4927_IRQ_IOC_PCIC;
-			break;
-		case 4:
-			irq = TX4927_IRQ_IOC_PCID;
-			break;
-		}
+	if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
+		/* PCI CardSlot (IDSEL=A23) */
+		/* PCIA => PCIA */
+		irq = (irq + 0 + slot) % 4;
 	} else {
 		/* PCI Backplane */
-		DBG("PCI Backplane PCI_SLOT(dev->devfn) is %d\n",
-		    PCI_SLOT(dev->devfn));
-		irq = backplane_pci_irq[PCI_SLOT(dev->devfn) - 17][irq];
+		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
+			irq = (irq + 33 - slot) % 4;
+		else
+			irq = (irq + 3 + slot) % 4;
 	}
-	DBG("assigned irq %d\n", irq);
-	return irq;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	unsigned char irq;
-
-	printk("PCI Setup for pin %d \n", pin);
-
-	if (dev->device == 0x9130) /* IDE */
-		irq = 14;
-	else
-		irq = pci_get_irq(dev, pin);
+	irq++;	/* 1-4 */
 
+	switch (irq) {
+	case 1:
+		irq = RBTX4927_IRQ_IOC_PCIA;
+		break;
+	case 2:
+		irq = RBTX4927_IRQ_IOC_PCIB;
+		break;
+	case 3:
+		irq = RBTX4927_IRQ_IOC_PCIC;
+		break;
+	case 4:
+		irq = RBTX4927_IRQ_IOC_PCID;
+		break;
+	}
 	return irq;
 }
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/fixup-rbtx4938.c b/arch/mips/pci/fixup-rbtx4938.c
new file mode 100644
index 000000000000..a80579af609b
--- /dev/null
+++ b/arch/mips/pci/fixup-rbtx4938.c
@@ -0,0 +1,53 @@
+/*
+ * Toshiba rbtx4938 pci routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4938.h>
+
+int __init rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = tx4938_pcic1_map_irq(dev, slot);
+
+	if (irq >= 0)
+		return irq;
+	irq = pin;
+	/* IRQ rotation */
+	irq--;	/* 0-3 */
+	if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
+		/* PCI CardSlot (IDSEL=A23) */
+		/* PCIA => PCIA (IDSEL=A23) */
+		irq = (irq + 0 + slot) % 4;
+	} else {
+		/* PCI Backplane */
+		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
+			irq = (irq + 33 - slot) % 4;
+		else
+			irq = (irq + 3 + slot) % 4;
+	}
+	irq++;	/* 1-4 */
+
+	switch (irq) {
+	case 1:
+		irq = RBTX4938_IRQ_IOC_PCIA;
+		break;
+	case 2:
+		irq = RBTX4938_IRQ_IOC_PCIB;
+		break;
+	case 3:
+		irq = RBTX4938_IRQ_IOC_PCIC;
+		break;
+	case 4:
+		irq = RBTX4938_IRQ_IOC_PCID;
+		break;
+	}
+	return irq;
+}
diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/fixup-rc32434.c
index cb84f4e8ccae..75b90dcb7a09 100644
--- a/arch/mips/pci/pci-jmr3927.c
+++ b/arch/mips/pci/fixup-rc32434.c
@@ -1,10 +1,7 @@
 /*
  * Copyright 2001 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *         	stevel@mvista.com or source@mvista.com
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -26,33 +23,47 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/jmr3927/jmr3927.h>
-#include <asm/debug.h>
+#include <asm/mach-rc32434/rc32434.h>
 
-struct resource pci_io_resource = {
-	.name	= "IO MEM",
-	.start	= 0x1000,			/* reserve regacy I/O space */
-	.end	= 0x1000 + JMR3927_PCIIO_SIZE - 1,
-	.flags	= IORESOURCE_IO
+static int __devinitdata irq_map[2][12] = {
+	{0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},
+	{0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3}
 };
 
-struct resource pci_mem_resource = {
-	.name	= "PCI MEM",
-	.start	= JMR3927_PCIMEM,
-	.end	= JMR3927_PCIMEM + JMR3927_PCIMEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
+int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = 0;
 
-extern struct pci_ops jmr3927_pci_ops;
+	if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12)
+		irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)];
 
-struct pci_controller jmr3927_controller = {
-	.pci_ops	= &jmr3927_pci_ops,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-	.mem_offset	= JMR3927_PCIMEM
-};
+	return irq + GROUP4_IRQ_BASE + 4;
+}
+
+static void rc32434_pci_early_fixup(struct pci_dev *dev)
+{
+	if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) {
+		/* disable prefetched memory range */
+		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
+		pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
+
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
+	}
+}
+
+/*
+ * The fixup applies to both the IDT and VIA devices present on the board
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, rc32434_pci_early_fixup);
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c
deleted file mode 100644
index f2ba06ee0c10..000000000000
--- a/arch/mips/pci/fixup-tx4938.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Toshiba rbtx4938 pci routines
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/tx4938/rbtx4938.h>
-
-extern struct pci_controller tx4938_pci_controller[];
-
-static int pci_get_irq(const struct pci_dev *dev, int pin)
-{
-	int irq = pin;
-	u8 slot = PCI_SLOT(dev->devfn);
-	struct pci_controller *controller = (struct pci_controller *)dev->sysdata;
-
-	if (controller == &tx4938_pci_controller[1]) {
-		/* TX4938 PCIC1 */
-		switch (slot) {
-		case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
-			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL)
-				return RBTX4938_IRQ_IRC + TX4938_IR_ETH0;
-			break;
-		case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
-			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL)
-				return RBTX4938_IRQ_IRC + TX4938_IR_ETH1;
-			break;
-		}
-		return 0;
-	}
-
-	/* IRQ rotation */
-	irq--;	/* 0-3 */
-	if (dev->bus->parent == NULL &&
-	    (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) {
-		/* PCI CardSlot (IDSEL=A23) */
-		/* PCIA => PCIA (IDSEL=A23) */
-		irq = (irq + 0 + slot) % 4;
-	} else {
-		/* PCI Backplane */
-		irq = (irq + 33 - slot) % 4;
-	}
-	irq++;	/* 1-4 */
-
-	switch (irq) {
-	case 1:
-		irq = RBTX4938_IRQ_IOC_PCIA;
-		break;
-	case 2:
-		irq = RBTX4938_IRQ_IOC_PCIB;
-		break;
-	case 3:
-		irq = RBTX4938_IRQ_IOC_PCIC;
-		break;
-	case 4:
-		irq = RBTX4938_IRQ_IOC_PCID;
-		break;
-	}
-	return irq;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	unsigned char irq = 0;
-
-	irq = pci_get_irq(dev, pin);
-
-	printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n",
-	       dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn),
-	       PCI_FUNC(dev->devfn), irq);
-
-	return irq;
-}
-
-/*
- * Do platform specific device initialization at pci_enable_device() time
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c
deleted file mode 100644
index de5e5f6bbf4c..000000000000
--- a/arch/mips/pci/fixup-vr4133.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/mips/pci/fixup-vr4133.c
- *
- * The NEC CMB-VR4133 Board specific PCI fixups.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Modified for support in 2.6
- * Author: Manish Lachwani (mlachwani@mvista.com)
- *
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/vr41xx/cmbvr4133.h>
-
-extern int vr4133_rockhopper;
-extern void ali_m1535plus_init(struct pci_dev *dev);
-extern void ali_m5229_init(struct pci_dev *dev);
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	/*
-	 * We have to reset AMD PCnet adapter on Rockhopper since
-	 * PMON leaves it enabled and generating interrupts. This leads
-	 * to a lock if some PCI device driver later enables the IRQ line
-	 * shared with PCnet and there is no AMD PCnet driver to catch its
-	 * interrupts.
-	 */
-#ifdef CONFIG_ROCKHOPPER
-	if (dev->vendor == PCI_VENDOR_ID_AMD &&
-		dev->device == PCI_DEVICE_ID_AMD_LANCE) {
-		inl(pci_resource_start(dev, 0) + 0x18);
-	}
-#endif
-
-	/*
-	 * we have to open the bridges' windows down to 0 because otherwise
-	 * we cannot access ISA south bridge I/O registers that get mapped from
-	 * 0. for example, 8259 PIC would be unaccessible without that
-	 */
-	if(dev->vendor == PCI_VENDOR_ID_INTEL && dev->device == PCI_DEVICE_ID_INTEL_S21152BB) {
-		pci_write_config_byte(dev, PCI_IO_BASE, 0);
-		if(dev->bus->number == 0) {
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0);
-		} else {
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 1);
-		}
-	}
-
-	return 0;
-}
-
-/*
- * M1535 IRQ mapping
- * Feel free to change this, although it shouldn't be needed
- */
-#define M1535_IRQ_INTA  7
-#define M1535_IRQ_INTB  9
-#define M1535_IRQ_INTC  10
-#define M1535_IRQ_INTD  11
-
-#define M1535_IRQ_USB   9
-#define M1535_IRQ_IDE   14
-#define M1535_IRQ_IDE2  15
-#define M1535_IRQ_PS2   12
-#define M1535_IRQ_RTC   8
-#define M1535_IRQ_FDC   6
-#define M1535_IRQ_AUDIO 5
-#define M1535_IRQ_COM1  4
-#define M1535_IRQ_COM2  4
-#define M1535_IRQ_IRDA  3
-#define M1535_IRQ_KBD   1
-#define M1535_IRQ_TMR   0
-
-/* Rockhopper "slots" assignment; this is hard-coded ... */
-#define ROCKHOPPER_M5451_SLOT  1
-#define ROCKHOPPER_M1535_SLOT  2
-#define ROCKHOPPER_M5229_SLOT  11
-#define ROCKHOPPER_M5237_SLOT  15
-#define ROCKHOPPER_PMU_SLOT    12
-/* ... and hard-wired. */
-#define ROCKHOPPER_PCI1_SLOT   3
-#define ROCKHOPPER_PCI2_SLOT   4
-#define ROCKHOPPER_PCI3_SLOT   5
-#define ROCKHOPPER_PCI4_SLOT   6
-#define ROCKHOPPER_PCNET_SLOT  1
-
-#define M1535_IRQ_MASK(n) (1 << (n))
-
-#define M1535_IRQ_EDGE  (M1535_IRQ_MASK(M1535_IRQ_TMR)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_KBD)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_COM1) | \
-                         M1535_IRQ_MASK(M1535_IRQ_COM2) | \
-                         M1535_IRQ_MASK(M1535_IRQ_IRDA) | \
-                         M1535_IRQ_MASK(M1535_IRQ_RTC)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_FDC)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_PS2))
-
-#define M1535_IRQ_LEVEL (M1535_IRQ_MASK(M1535_IRQ_IDE)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_USB)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTA) | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTB) | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTC) | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTD))
-
-struct irq_map_entry {
-	u16 bus;
-	u8 slot;
-	u8 irq;
-};
-static struct irq_map_entry int_map[] = {
-	{1, ROCKHOPPER_M5451_SLOT, M1535_IRQ_AUDIO},	/* Audio controller */
-	{1, ROCKHOPPER_PCI1_SLOT, M1535_IRQ_INTD},	/* PCI slot #1 */
-	{1, ROCKHOPPER_PCI2_SLOT, M1535_IRQ_INTC},	/* PCI slot #2 */
-	{1, ROCKHOPPER_M5237_SLOT, M1535_IRQ_USB},	/* USB host controller */
-	{1, ROCKHOPPER_M5229_SLOT, IDE_PRIMARY_IRQ},	/* IDE controller */
-	{2, ROCKHOPPER_PCNET_SLOT, M1535_IRQ_INTD},	/* AMD Am79c973 on-board
-							   ethernet */
-	{2, ROCKHOPPER_PCI3_SLOT, M1535_IRQ_INTB},	/* PCI slot #3 */
-	{2, ROCKHOPPER_PCI4_SLOT, M1535_IRQ_INTC}	/* PCI slot #4 */
-};
-
-static int pci_intlines[] =
-    { M1535_IRQ_INTA, M1535_IRQ_INTB, M1535_IRQ_INTC, M1535_IRQ_INTD };
-
-/* Determine the Rockhopper IRQ line number for the PCI device */
-int rockhopper_get_irq(struct pci_dev *dev, u8 pin, u8 slot)
-{
-	struct pci_bus *bus;
-	int i;
-
-	bus = dev->bus;
-	if (bus == NULL)
-		return -1;
-
-	for (i = 0; i < ARRAY_SIZE(int_map); i++) {
-		if (int_map[i].bus == bus->number && int_map[i].slot == slot) {
-			int line;
-			for (line = 0; line < 4; line++)
-				if (pci_intlines[line] == int_map[i].irq)
-					break;
-			if (line < 4)
-				return pci_intlines[(line + (pin - 1)) % 4];
-			else
-				return int_map[i].irq;
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_ROCKHOPPER
-void i8259_init(void)
-{
-	init_i8259_irqs();
-
-	outb(0x00, 0x4d0);
-	outb(0x02, 0x4d1);	/* USB IRQ9 is level */
-}
-#endif
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	extern int pci_probe_only;
-	pci_probe_only = 1;
-
-#ifdef CONFIG_ROCKHOPPER
-	if( dev->bus->number == 1 && vr4133_rockhopper )  {
-		if(slot == ROCKHOPPER_PCI1_SLOT || slot == ROCKHOPPER_PCI2_SLOT)
-			dev->irq = CMBVR41XX_INTA_IRQ;
-		else
-			dev->irq = rockhopper_get_irq(dev, pin, slot);
-	} else
-		dev->irq = CMBVR41XX_INTA_IRQ;
-#else
-	dev->irq = CMBVR41XX_INTA_IRQ;
-#endif
-
-	return dev->irq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, ali_m1535plus_init);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, ali_m5229_init);
-
-
diff --git a/arch/mips/pci/ops-mace.c b/arch/mips/pci/ops-mace.c
index e95881897ec9..1cfb5588699f 100644
--- a/arch/mips/pci/ops-mace.c
+++ b/arch/mips/pci/ops-mace.c
@@ -61,6 +61,13 @@ mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	/* ack possible master abort */
 	mace->pci.error &= ~MACEPCI_ERROR_MASTER_ABORT;
 	mace->pci.control = control;
+	/*
+	 * someone forgot to set the ultra bit for the onboard
+	 * scsi chips; we fake it here
+	 */
+	if (bus->number == 0 && reg == 0x40 && size == 4 &&
+	    (devfn == (1 << 3) || devfn == (2 << 3)))
+		*val |= 0x1000;
 
 	DPRINTK("read%d: reg=%08x,val=%02x\n", size * 8, reg, *val);
 
diff --git a/arch/mips/pci/ops-rc32434.c b/arch/mips/pci/ops-rc32434.c
new file mode 100644
index 000000000000..d1f8fa210ca1
--- /dev/null
+++ b/arch/mips/pci/ops-rc32434.c
@@ -0,0 +1,207 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     pci_ops for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include <asm/cpu.h>
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+
+#define PCI_CFG_SET(bus, slot, func, off) \
+	(rc32434_pci->pcicfga = (0x80000000 | \
+				((bus) << 16) | ((slot)<<11) | \
+				((func)<<8) | (off)))
+
+static inline int config_access(unsigned char access_type,
+				struct pci_bus *bus, unsigned int devfn,
+				unsigned char where, u32 *data)
+{
+	unsigned int slot = PCI_SLOT(devfn);
+	u8 func = PCI_FUNC(devfn);
+
+	/* Setup address */
+	PCI_CFG_SET(bus->number, slot, func, where);
+	rc32434_sync();
+
+	if (access_type == PCI_ACCESS_WRITE)
+		rc32434_pci->pcicfgd = *data;
+	else
+		*data = rc32434_pci->pcicfgd;
+
+	rc32434_sync();
+
+	return 0;
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
+			    int where, u8 *val)
+{
+	u32 data;
+	int ret;
+
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+	*val = (data >> ((where & 3) << 3)) & 0xff;
+	return ret;
+}
+
+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
+			    int where, u16 *val)
+{
+	u32 data;
+	int ret;
+
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+	*val = (data >> ((where & 3) << 3)) & 0xffff;
+	return ret;
+}
+
+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
+			     int where, u32 *val)
+{
+	int ret;
+	int delay = 1;
+
+	/*
+	 * Don't scan too far, else there will be errors with plugged in
+	 * daughterboard (rb564).
+	 */
+	if (bus->number == 0 && PCI_SLOT(devfn) > 21)
+		return 0;
+
+retry:
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
+
+	/*
+	 * Certain devices react delayed at device scan time, this
+	 * gives them time to settle
+	 */
+	if (where == PCI_VENDOR_ID) {
+		if (ret == 0xffffffff || ret == 0x00000000 ||
+		    ret == 0x0000ffff || ret == 0xffff0000) {
+			if (delay > 4)
+				return 0;
+			delay *= 2;
+			msleep(delay);
+			goto retry;
+		}
+	}
+
+	return ret;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
+		  u8 val)
+{
+	u32 data = 0;
+
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+
+	data = (data & ~(0xff << ((where & 3) << 3))) |
+	    (val << ((where & 3) << 3));
+
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
+		  u16 val)
+{
+	u32 data = 0;
+
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+
+	data = (data & ~(0xffff << ((where & 3) << 3))) |
+	    (val << ((where & 3) << 3));
+
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
+		   u32 val)
+{
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn,
+			   int where, int size, u32 *val)
+{
+	switch (size) {
+	case 1:
+		return read_config_byte(bus, devfn, where, (u8 *) val);
+	case 2:
+		return read_config_word(bus, devfn, where, (u16 *) val);
+	default:
+		return read_config_dword(bus, devfn, where, val);
+	}
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn,
+			    int where, int size, u32 val)
+{
+	switch (size) {
+	case 1:
+		return write_config_byte(bus, devfn, where, (u8) val);
+	case 2:
+		return write_config_word(bus, devfn, where, (u16) val);
+	default:
+		return write_config_dword(bus, devfn, where, val);
+	}
+}
+
+struct pci_ops rc32434_pci_ops = {
+	.read = pci_config_read,
+	.write = pci_config_write,
+};
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index aa698bd0d5e3..8a17a39e5bf2 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -8,7 +8,7 @@
  *
  * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c
  *
- *     Define the pci_ops for JMR3927.
+ *     Define the pci_ops for TX3927.
  *
  * Much of the code is derived from the original DDB5074 port by
  * Geert Uytterhoeven <geert@sonycom.com>
@@ -39,7 +39,7 @@
 #include <linux/init.h>
 
 #include <asm/addrspace.h>
-#include <asm/jmr3927/jmr3927.h>
+#include <asm/txx9/tx3927.h>
 
 static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
 	unsigned char where)
@@ -68,7 +68,7 @@ static inline int check_abort(void)
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
 	int ret;
@@ -94,7 +94,7 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	return check_abort();
 }
 
-static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
 	int ret;
@@ -125,7 +125,80 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	return check_abort();
 }
 
-struct pci_ops jmr3927_pci_ops = {
-	jmr3927_pci_read_config,
-	jmr3927_pci_write_config,
+static struct pci_ops tx3927_pci_ops = {
+	.read = tx3927_pci_read_config,
+	.write = tx3927_pci_write_config,
 };
+
+void __init tx3927_pcic_setup(struct pci_controller *channel,
+			      unsigned long sdram_size, int extarb)
+{
+	unsigned long flags;
+	unsigned long io_base =
+		channel->io_resource->start + mips_io_port_base - IO_BASE;
+	unsigned long io_size =
+		channel->io_resource->end - channel->io_resource->start;
+	unsigned long io_pciaddr =
+		channel->io_resource->start - channel->io_offset;
+	unsigned long mem_base =
+		channel->mem_resource->start;
+	unsigned long mem_size =
+		channel->mem_resource->end - channel->mem_resource->start;
+	unsigned long mem_pciaddr =
+		channel->mem_resource->start - channel->mem_offset;
+
+	printk(KERN_INFO "TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s",
+	       tx3927_pcicptr->did, tx3927_pcicptr->vid,
+	       tx3927_pcicptr->rid,
+	       extarb ? "External" : "Internal");
+	channel->pci_ops = &tx3927_pci_ops;
+
+	local_irq_save(flags);
+	/* Disable External PCI Config. Access */
+	tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
+#ifdef __BIG_ENDIAN
+	tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
+		TX3927_PCIC_LBC_TIBSE |
+		TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
+#endif
+	/* LB->PCI mappings */
+	tx3927_pcicptr->iomas = ~(io_size - 1);
+	tx3927_pcicptr->ilbioma = io_base;
+	tx3927_pcicptr->ipbioma = io_pciaddr;
+	tx3927_pcicptr->mmas = ~(mem_size - 1);
+	tx3927_pcicptr->ilbmma = mem_base;
+	tx3927_pcicptr->ipbmma = mem_pciaddr;
+	/* PCI->LB mappings */
+	tx3927_pcicptr->iobas = 0xffffffff;
+	tx3927_pcicptr->ioba = 0;
+	tx3927_pcicptr->tlbioma = 0;
+	tx3927_pcicptr->mbas = ~(sdram_size - 1);
+	tx3927_pcicptr->mba = 0;
+	tx3927_pcicptr->tlbmma = 0;
+	/* Enable Direct mapping Address Space Decoder */
+	tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
+
+	/* Clear All Local Bus Status */
+	tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+	/* Enable All Local Bus Interrupts */
+	tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
+	/* Clear All PCI Status Error */
+	tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
+	/* Enable All PCI Status Error Interrupts */
+	tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
+
+	/* PCIC Int => IRC IRQ10 */
+	tx3927_pcicptr->il = TX3927_IR_PCI;
+	/* Target Control (per errata) */
+	tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
+
+	/* Enable Bus Arbiter */
+	if (!extarb)
+		tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
+
+	tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
+		PCI_COMMAND_MEMORY |
+		PCI_COMMAND_IO |
+		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	local_irq_restore(flags);
+}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index 150419c8b414..c6b49bccd274 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -1,209 +1,408 @@
 /*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
+ * Define the pci_ops for the PCIC on Toshiba TX4927, TX4938, etc.
  *
- * Copyright (C) 2000-2001 Toshiba Corporation
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c
- *
- *     Define the pci_ops for the Toshiba rbtx4927
- *
- * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@sonycom.com>
- *
- * Copyright 2004 MontaVista Software Inc.
- * Author: Manish Lachwani (mlachwani@mvista.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Based on linux/arch/mips/pci/ops-tx4938.c,
+ *          linux/arch/mips/pci/fixup-rbtx4938.c,
+ *          linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
  *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  */
-#include <linux/types.h>
-#include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-#include <asm/tx4927/tx4927_pci.h>
-
-/* initialize in setup */
-struct resource pci_io_resource = {
-	.name	= "TX4927 PCI IO SPACE",
-	.start	= 0x1000,
-	.end	= (0x1000 + (TX4927_PCIIO_SIZE)) - 1,
-	.flags	= IORESOURCE_IO
-};
+#include <asm/txx9/tx4927pcic.h>
 
-/* initialize in setup */
-struct resource pci_mem_resource = {
-	.name	= "TX4927 PCI MEM SPACE",
-	.start	= TX4927_PCIMEM,
-	.end	= TX4927_PCIMEM + TX4927_PCIMEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
+static struct {
+	struct pci_controller *channel;
+	struct tx4927_pcic_reg __iomem *pcicptr;
+} pcicptrs[2];	/* TX4938 has 2 pcic */
+
+static void __init set_tx4927_pcicptr(struct pci_controller *channel,
+				      struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].channel == channel) {
+			pcicptrs[i].pcicptr = pcicptr;
+			return;
+		}
+	}
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (!pcicptrs[i].channel) {
+			pcicptrs[i].channel = channel;
+			pcicptrs[i].pcicptr = pcicptr;
+			return;
+		}
+	}
+	BUG();
+}
 
-static int mkaddr(int bus, int dev_fn, int where, int *flagsp)
+struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
+	struct pci_controller *channel)
 {
-	if (bus > 0) {
-		/* Type 1 configuration */
-		tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
-	} else {
-		if (dev_fn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0))
-			return -1;
+	int i;
 
-		/* Type 0 configuration */
-		tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].channel == channel)
+			return pcicptrs[i].pcicptr;
 	}
+	return NULL;
+}
+
+static int mkaddr(struct pci_bus *bus, unsigned int devfn, int where,
+		  struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	if (bus->parent == NULL &&
+	    devfn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0))
+		return -1;
+	__raw_writel(((bus->number & 0xff) << 0x10)
+		     | ((devfn & 0xff) << 0x08) | (where & 0xfc)
+		     | (bus->parent ? 1 : 0),
+		     &pcicptr->g2pcfgadrs);
 	/* clear M_ABORT and Disable M_ABORT Int. */
-	tx4927_pcicptr->pcistatus =
-	    (tx4927_pcicptr->pcistatus & 0x0000ffff) |
-	    (PCI_STATUS_REC_MASTER_ABORT << 16);
-	tx4927_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
+	__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+		     | (PCI_STATUS_REC_MASTER_ABORT << 16),
+		     &pcicptr->pcistatus);
 	return 0;
 }
 
-static int check_abort(int flags)
+static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
 {
 	int code = PCIBIOS_SUCCESSFUL;
-	if (tx4927_pcicptr->
-	    pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
-		tx4927_pcicptr->pcistatus =
-		    (tx4927_pcicptr->
-		     pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
-						<< 16);
-		tx4927_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
+
+	/* wait write cycle completion before checking error status */
+	while (__raw_readl(&pcicptr->pcicstatus) & TX4927_PCIC_PCICSTATUS_IWB)
+		;
+	if (__raw_readl(&pcicptr->pcistatus)
+	    & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
+		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+			     | (PCI_STATUS_REC_MASTER_ABORT << 16),
+			     &pcicptr->pcistatus);
 		code = PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return code;
 }
 
-static int tx4927_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 * val)
+static u8 icd_readb(int offset, struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 3;
+#endif
+	return __raw_readb((void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static u16 icd_readw(int offset, struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 2;
+#endif
+	return __raw_readw((void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static u32 icd_readl(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	return __raw_readl(&pcicptr->g2pcfgdata);
+}
+static void icd_writeb(u8 val, int offset,
+		       struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 3;
+#endif
+	__raw_writeb(val, (void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static void icd_writew(u16 val, int offset,
+		       struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 2;
+#endif
+	__raw_writew(val, (void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static void icd_writel(u32 val, struct tx4927_pcic_reg __iomem *pcicptr)
 {
-	int flags, retval, dev, busno, func;
+	__raw_writel(val, &pcicptr->g2pcfgdata);
+}
 
-	busno = bus->number;
-        dev = PCI_SLOT(devfn);
-        func = PCI_FUNC(devfn);
+static struct tx4927_pcic_reg __iomem *pci_bus_to_pcicptr(struct pci_bus *bus)
+{
+	struct pci_controller *channel = bus->sysdata;
+	return get_tx4927_pcicptr(channel);
+}
 
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		busno = bus->number;
-	} else {
-		busno = 0;
-	}
+static int tx4927_pci_config_read(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 *val)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus);
 
-	if (mkaddr(busno, devfn, where, &flags))
+	if (mkaddr(bus, devfn, where, pcicptr)) {
+		*val = 0xffffffff;
 		return -1;
-
+	}
 	switch (size) {
 	case 1:
-		*val = *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->
-                              g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-						(where & 3));
-#else
-						((where & 0x3) ^ 0x3));
-#endif
+		*val = icd_readb(where & 3, pcicptr);
 		break;
 	case 2:
-		*val = *(volatile u16 *) ((unsigned long) & tx4927_pcicptr->
-                               g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-						(where & 3));
-#else
-						((where & 0x3) ^ 0x2));
-#endif
-		break;
-	case 4:
-		*val = tx4927_pcicptr->g2pcfgdata;
+		*val = icd_readw(where & 3, pcicptr);
 		break;
+	default:
+		*val = icd_readl(pcicptr);
 	}
+	return check_abort(pcicptr);
+}
 
-	retval = check_abort(flags);
-	if (retval == PCIBIOS_DEVICE_NOT_FOUND)
-		*val = 0xffffffff;
+static int tx4927_pci_config_write(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 val)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus);
 
-	return retval;
+	if (mkaddr(bus, devfn, where, pcicptr))
+		return -1;
+	switch (size) {
+	case 1:
+		icd_writeb(val, where & 3, pcicptr);
+		break;
+	case 2:
+		icd_writew(val, where & 3, pcicptr);
+		break;
+	default:
+		icd_writel(val, pcicptr);
+	}
+	return check_abort(pcicptr);
 }
 
-static int tx4927_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				int size, u32 val)
+static struct pci_ops tx4927_pci_ops = {
+	.read = tx4927_pci_config_read,
+	.write = tx4927_pci_config_write,
+};
+
+static struct {
+	u8 trdyto;
+	u8 retryto;
+	u16 gbwc;
+} tx4927_pci_opts __devinitdata = {
+	.trdyto = 0,
+	.retryto = 0,
+	.gbwc = 0xfe0,	/* 4064 GBUSCLK for CCFG.GTOT=0b11 */
+};
+
+void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+			      struct pci_controller *channel, int extarb)
 {
-	int flags, dev, busno, func;
-	busno = bus->number;
-        dev = PCI_SLOT(devfn);
-        func = PCI_FUNC(devfn);
+	int i;
+	unsigned long flags;
 
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		busno = bus->number;
-	} else {
-		busno = 0;
-	}
+	set_tx4927_pcicptr(channel, pcicptr);
 
-	if (mkaddr(busno, devfn, where, &flags))
-		return -1;
+	if (!channel->pci_ops)
+		printk(KERN_INFO
+		       "PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+		       __raw_readl(&pcicptr->pciid) >> 16,
+		       __raw_readl(&pcicptr->pciid) & 0xffff,
+		       __raw_readl(&pcicptr->pciccrev) & 0xff,
+			extarb ? "External" : "Internal");
+	channel->pci_ops = &tx4927_pci_ops;
 
-	switch (size) {
-	case 1:
-		 *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->
-                          g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-					(where & 3)) = val;
+	local_irq_save(flags);
+
+	/* Disable All Initiator Space */
+	__raw_writel(__raw_readl(&pcicptr->pciccfg)
+		     & ~(TX4927_PCIC_PCICCFG_G2PMEN(0)
+			 | TX4927_PCIC_PCICCFG_G2PMEN(1)
+			 | TX4927_PCIC_PCICCFG_G2PMEN(2)
+			 | TX4927_PCIC_PCICCFG_G2PIOEN),
+		     &pcicptr->pciccfg);
+
+	/* GB->PCI mappings */
+	__raw_writel((channel->io_resource->end - channel->io_resource->start)
+		     >> 4,
+		     &pcicptr->g2piomask);
+	____raw_writeq((channel->io_resource->start +
+			channel->io_map_base - IO_BASE) |
+#ifdef __BIG_ENDIAN
+		       TX4927_PCIC_G2PIOGBASE_ECHG
 #else
-					((where & 0x3) ^ 0x3)) = val;
+		       TX4927_PCIC_G2PIOGBASE_BSDIS
 #endif
-		break;
-
-	case 2:
-		*(volatile u16 *) ((unsigned long) & tx4927_pcicptr->
-                           g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-					(where & 3)) = val;
+		       , &pcicptr->g2piogbase);
+	____raw_writeq(channel->io_resource->start - channel->io_offset,
+		       &pcicptr->g2piopbase);
+	for (i = 0; i < 3; i++) {
+		__raw_writel(0, &pcicptr->g2pmmask[i]);
+		____raw_writeq(0, &pcicptr->g2pmgbase[i]);
+		____raw_writeq(0, &pcicptr->g2pmpbase[i]);
+	}
+	if (channel->mem_resource->end) {
+		__raw_writel((channel->mem_resource->end
+			      - channel->mem_resource->start) >> 4,
+			     &pcicptr->g2pmmask[0]);
+		____raw_writeq(channel->mem_resource->start |
+#ifdef __BIG_ENDIAN
+			       TX4927_PCIC_G2PMnGBASE_ECHG
 #else
-					((where & 0x3) ^ 0x2)) = val;
+			       TX4927_PCIC_G2PMnGBASE_BSDIS
 #endif
-		break;
-	case 4:
-		tx4927_pcicptr->g2pcfgdata = val;
-		break;
+			       , &pcicptr->g2pmgbase[0]);
+		____raw_writeq(channel->mem_resource->start -
+			       channel->mem_offset,
+			       &pcicptr->g2pmpbase[0]);
+	}
+	/* PCI->GB mappings (I/O 256B) */
+	__raw_writel(0, &pcicptr->p2giopbase); /* 256B */
+	____raw_writeq(0, &pcicptr->p2giogbase);
+	/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
+	__raw_writel(0, &pcicptr->p2gm0plbase);
+	__raw_writel(0, &pcicptr->p2gm0pubase);
+	____raw_writeq(TX4927_PCIC_P2GMnGBASE_TMEMEN |
+#ifdef __BIG_ENDIAN
+		       TX4927_PCIC_P2GMnGBASE_TECHG
+#else
+		       TX4927_PCIC_P2GMnGBASE_TBSDIS
+#endif
+		       , &pcicptr->p2gmgbase[0]);
+	/* PCI->GB mappings (MEM 16MB) */
+	__raw_writel(0xffffffff, &pcicptr->p2gm1plbase);
+	__raw_writel(0xffffffff, &pcicptr->p2gm1pubase);
+	____raw_writeq(0, &pcicptr->p2gmgbase[1]);
+	/* PCI->GB mappings (MEM 1MB) */
+	__raw_writel(0xffffffff, &pcicptr->p2gm2pbase); /* 1MB */
+	____raw_writeq(0, &pcicptr->p2gmgbase[2]);
+
+	/* Clear all (including IRBER) except for GBWC */
+	__raw_writel((tx4927_pci_opts.gbwc << 16)
+		     & TX4927_PCIC_PCICCFG_GBWC_MASK,
+		     &pcicptr->pciccfg);
+	/* Enable Initiator Memory Space */
+	if (channel->mem_resource->end)
+		__raw_writel(__raw_readl(&pcicptr->pciccfg)
+			     | TX4927_PCIC_PCICCFG_G2PMEN(0),
+			     &pcicptr->pciccfg);
+	/* Enable Initiator I/O Space */
+	if (channel->io_resource->end)
+		__raw_writel(__raw_readl(&pcicptr->pciccfg)
+			     | TX4927_PCIC_PCICCFG_G2PIOEN,
+			     &pcicptr->pciccfg);
+	/* Enable Initiator Config */
+	__raw_writel(__raw_readl(&pcicptr->pciccfg)
+		     | TX4927_PCIC_PCICCFG_ICAEN | TX4927_PCIC_PCICCFG_TCAR,
+		     &pcicptr->pciccfg);
+
+	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
+	__raw_writel(0, &pcicptr->pcicfg1);
+
+	__raw_writel((__raw_readl(&pcicptr->g2ptocnt) & ~0xffff)
+		     | (tx4927_pci_opts.trdyto & 0xff)
+		     | ((tx4927_pci_opts.retryto & 0xff) << 8),
+		     &pcicptr->g2ptocnt);
+
+	/* Clear All Local Bus Status */
+	__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+	/* Enable All Local Bus Interrupts */
+	__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicmask);
+	/* Clear All Initiator Status */
+	__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+	/* Enable All Initiator Interrupts */
+	__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pmask);
+	/* Clear All PCI Status Error */
+	__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+		     | (TX4927_PCIC_PCISTATUS_ALL << 16),
+		     &pcicptr->pcistatus);
+	/* Enable All PCI Status Error Interrupts */
+	__raw_writel(TX4927_PCIC_PCISTATUS_ALL, &pcicptr->pcimask);
+
+	if (!extarb) {
+		/* Reset Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+		__raw_writel(0, &pcicptr->pbabm);
+		/* Enable Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_PBAEN, &pcicptr->pbacfg);
 	}
 
-	return check_abort(flags);
+	__raw_writel(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+		     | PCI_COMMAND_PARITY | PCI_COMMAND_SERR,
+		     &pcicptr->pcistatus);
+	local_irq_restore(flags);
+
+	printk(KERN_DEBUG
+	       "PCI: COMMAND=%04x,PCIMASK=%04x,"
+	       "TRDYTO=%02x,RETRYTO=%02x,GBWC=%03x\n",
+	       __raw_readl(&pcicptr->pcistatus) & 0xffff,
+	       __raw_readl(&pcicptr->pcimask) & 0xffff,
+	       __raw_readl(&pcicptr->g2ptocnt) & 0xff,
+	       (__raw_readl(&pcicptr->g2ptocnt) & 0xff00) >> 8,
+	       (__raw_readl(&pcicptr->pciccfg) >> 16) & 0xfff);
 }
 
-struct pci_ops tx4927_pci_ops = {
-	tx4927_pcibios_read_config,
-	tx4927_pcibios_write_config
-};
+static void tx4927_report_pcic_status1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	__u16 pcistatus = (__u16)(__raw_readl(&pcicptr->pcistatus) >> 16);
+	__u32 g2pstatus = __raw_readl(&pcicptr->g2pstatus);
+	__u32 pcicstatus = __raw_readl(&pcicptr->pcicstatus);
+	static struct {
+		__u32 flag;
+		const char *str;
+	} pcistat_tbl[] = {
+		{ PCI_STATUS_DETECTED_PARITY,	"DetectedParityError" },
+		{ PCI_STATUS_SIG_SYSTEM_ERROR,	"SignaledSystemError" },
+		{ PCI_STATUS_REC_MASTER_ABORT,	"ReceivedMasterAbort" },
+		{ PCI_STATUS_REC_TARGET_ABORT,	"ReceivedTargetAbort" },
+		{ PCI_STATUS_SIG_TARGET_ABORT,	"SignaledTargetAbort" },
+		{ PCI_STATUS_PARITY,	"MasterParityError" },
+	}, g2pstat_tbl[] = {
+		{ TX4927_PCIC_G2PSTATUS_TTOE,	"TIOE" },
+		{ TX4927_PCIC_G2PSTATUS_RTOE,	"RTOE" },
+	}, pcicstat_tbl[] = {
+		{ TX4927_PCIC_PCICSTATUS_PME,	"PME" },
+		{ TX4927_PCIC_PCICSTATUS_TLB,	"TLB" },
+		{ TX4927_PCIC_PCICSTATUS_NIB,	"NIB" },
+		{ TX4927_PCIC_PCICSTATUS_ZIB,	"ZIB" },
+		{ TX4927_PCIC_PCICSTATUS_PERR,	"PERR" },
+		{ TX4927_PCIC_PCICSTATUS_SERR,	"SERR" },
+		{ TX4927_PCIC_PCICSTATUS_GBE,	"GBE" },
+		{ TX4927_PCIC_PCICSTATUS_IWB,	"IWB" },
+	};
+	int i, cont;
 
-/*
- * h/w only supports devices 0x00 to 0x14
- */
-struct pci_controller tx4927_controller = {
-	.pci_ops        = &tx4927_pci_ops,
-	.io_resource    = &pci_io_resource,
-	.mem_resource   = &pci_mem_resource,
-};
+	printk(KERN_ERR "");
+	if (pcistatus & TX4927_PCIC_PCISTATUS_ALL) {
+		printk(KERN_CONT "pcistat:%04x(", pcistatus);
+		for (i = 0, cont = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
+			if (pcistatus & pcistat_tbl[i].flag)
+				printk(KERN_CONT "%s%s",
+				       cont++ ? " " : "", pcistat_tbl[i].str);
+		printk(KERN_CONT ") ");
+	}
+	if (g2pstatus & TX4927_PCIC_G2PSTATUS_ALL) {
+		printk(KERN_CONT "g2pstatus:%08x(", g2pstatus);
+		for (i = 0, cont = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
+			if (g2pstatus & g2pstat_tbl[i].flag)
+				printk(KERN_CONT "%s%s",
+				       cont++ ? " " : "", g2pstat_tbl[i].str);
+		printk(KERN_CONT ") ");
+	}
+	if (pcicstatus & TX4927_PCIC_PCICSTATUS_ALL) {
+		printk(KERN_CONT "pcicstatus:%08x(", pcicstatus);
+		for (i = 0, cont = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
+			if (pcicstatus & pcicstat_tbl[i].flag)
+				printk(KERN_CONT "%s%s",
+				       cont++ ? " " : "", pcicstat_tbl[i].str);
+		printk(KERN_CONT ")");
+	}
+	printk(KERN_CONT "\n");
+}
+
+void tx4927_report_pcic_status(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].pcicptr)
+			tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
+	}
+}
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
deleted file mode 100644
index a450c4062031..000000000000
--- a/arch/mips/pci/ops-tx4938.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Define the pci_ops for the Toshiba rbtx4938
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/addrspace.h>
-#include <asm/tx4938/rbtx4938.h>
-
-/* initialize in setup */
-struct resource pci_io_resource = {
-	.name	= "pci IO space",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_IO
-};
-
-/* initialize in setup */
-struct resource pci_mem_resource = {
-	.name	= "pci memory space",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_MEM
-};
-
-struct resource tx4938_pcic1_pci_io_resource = {
-	.name	= "PCI1 IO",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_IO
-};
-struct resource tx4938_pcic1_pci_mem_resource = {
-	.name	= "PCI1 mem",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_MEM
-};
-
-static int mkaddr(int bus, int dev_fn, int where,
-		  struct tx4938_pcic_reg *pcicptr)
-{
-	if (bus > 0) {
-		/* Type 1 configuration */
-		pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
-	} else {
-		if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0))
-			return -1;
-
-		/* Type 0 configuration */
-		pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
-	}
-	/* clear M_ABORT and Disable M_ABORT Int. */
-	pcicptr->pcistatus =
-	    (pcicptr->pcistatus & 0x0000ffff) |
-	    (PCI_STATUS_REC_MASTER_ABORT << 16);
-	pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-	return 0;
-}
-
-static int check_abort(struct tx4938_pcic_reg *pcicptr)
-{
-	int code = PCIBIOS_SUCCESSFUL;
-	/* wait write cycle completion before checking error status */
-	while (pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB)
-				;
-	if (pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
-		pcicptr->pcistatus =
-		    (pcicptr->
-		     pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
-						<< 16);
-		pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
-		code = PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	return code;
-}
-
-extern struct pci_controller tx4938_pci_controller[];
-extern struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch);
-
-static struct tx4938_pcic_reg *pci_bus_to_pcicptr(struct pci_bus *bus)
-{
-	struct pci_controller *channel = bus->sysdata;
-	return get_tx4938_pcicptr(channel - &tx4938_pci_controller[0]);
-}
-
-static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 * val)
-{
-	int retval, dev, busno, func;
-	struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus);
-	void __iomem *cfgdata =
-		(void __iomem *)(unsigned long)&pcicptr->g2pcfgdata;
-
-	dev = PCI_SLOT(devfn);
-	func = PCI_FUNC(devfn);
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL)
-		busno = bus->number;
-	else {
-		busno = 0;
-	}
-
-	if (mkaddr(busno, devfn, where, pcicptr))
-		return -1;
-
-	switch (size) {
-	case 1:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 3) ^ 3;
-#else
-		cfgdata += where & 3;
-#endif
-		*val = __raw_readb(cfgdata);
-		break;
-	case 2:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 2) ^ 2;
-#else
-		cfgdata += where & 2;
-#endif
-		*val = __raw_readw(cfgdata);
-		break;
-	case 4:
-		*val = __raw_readl(cfgdata);
-		break;
-	}
-
-	retval = check_abort(pcicptr);
-	if (retval == PCIBIOS_DEVICE_NOT_FOUND)
-		*val = 0xffffffff;
-
-	return retval;
-}
-
-static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-						int size, u32 val)
-{
-	int dev, busno, func;
-	struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus);
-	void __iomem *cfgdata =
-		(void __iomem *)(unsigned long)&pcicptr->g2pcfgdata;
-
-	busno = bus->number;
-	dev = PCI_SLOT(devfn);
-	func = PCI_FUNC(devfn);
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		busno = bus->number;
-	} else {
-		busno = 0;
-	}
-
-	if (mkaddr(busno, devfn, where, pcicptr))
-		return -1;
-
-	switch (size) {
-	case 1:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 3) ^ 3;
-#else
-		cfgdata += where & 3;
-#endif
-		__raw_writeb(val, cfgdata);
-		break;
-	case 2:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 2) ^ 2;
-#else
-		cfgdata += where & 2;
-#endif
-		__raw_writew(val, cfgdata);
-		break;
-	case 4:
-		__raw_writel(val, cfgdata);
-		break;
-	}
-
-	return check_abort(pcicptr);
-}
-
-struct pci_ops tx4938_pci_ops = {
-	tx4938_pcibios_read_config,
-	tx4938_pcibios_write_config
-};
-
-struct pci_controller tx4938_pci_controller[] = {
-	/* h/w only supports devices 0x00 to 0x14 */
-	{
-		.pci_ops        = &tx4938_pci_ops,
-		.io_resource    = &pci_io_resource,
-		.mem_resource   = &pci_mem_resource,
-	},
-	/* h/w only supports devices 0x00 to 0x14 */
-	{
-		.pci_ops        = &tx4938_pci_ops,
-		.io_resource    = &tx4938_pcic1_pci_io_resource,
-		.mem_resource   = &tx4938_pcic1_pci_mem_resource,
-        }
-};
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index 87e2c8f54e2d..a9060c771840 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -202,7 +202,6 @@ static int __init bcm1480_pcibios_init(void)
 {
 	uint32_t cmdreg;
 	uint64_t reg;
-	extern int pci_probe_only;
 
 	/* CFE will assign PCI resources */
 	pci_probe_only = 1;
@@ -254,8 +253,6 @@ static int __init bcm1480_pcibios_init(void)
 		ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
 	bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
 	set_io_port_base(bcm1480_controller.io_map_base);
-	isa_slot_offset = (unsigned long)
-		ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
 
 	register_pci_controller(&bcm1480_controller);
 
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index a18516925cdd..ce92f82b16d2 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -47,7 +47,6 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
 	static int num_bridges = 0;
 	bridge_t *bridge;
 	int slot;
-	extern int pci_probe_only;
 
 	pci_probe_only = 1;
 
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index e70ae3236e0b..a98e543a514a 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -10,7 +10,7 @@
 #include <linux/pci.h>
 #include <linux/types.h>
 
-#include <asm/bootinfo.h>
+#include <asm/lasat/lasat.h>
 
 #include <irq.h>
 
@@ -39,16 +39,10 @@ static int __init lasat_pci_setup(void)
 {
 	printk(KERN_DEBUG "PCI: starting\n");
 
-	switch (mips_machtype) {
-	case MACH_LASAT_100:
-		lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
-		break;
-	case MACH_LASAT_200:
+	if (IS_LASAT_200())
 		lasat_pci_controller.pci_ops = &nile4_pci_ops;
-		break;
-	default:
-		panic("pcibios_init: mips_machtype incorrect");
-	}
+	else
+		lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
 
 	register_pci_controller(&lasat_pci_controller);
 
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
new file mode 100644
index 000000000000..1c2821e2f494
--- /dev/null
+++ b/arch/mips/pci/pci-rc32434.c
@@ -0,0 +1,221 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     PCI initialization for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+/* define an unsigned array for the PCI registers */
+static unsigned int korina_cnfg_regs[25] = {
+	KORINA_CNFG1, KORINA_CNFG2, KORINA_CNFG3, KORINA_CNFG4,
+	KORINA_CNFG5, KORINA_CNFG6, KORINA_CNFG7, KORINA_CNFG8,
+	KORINA_CNFG9, KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12,
+	KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16,
+	KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20,
+	KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24
+};
+static struct resource rc32434_res_pci_mem1;
+static struct resource rc32434_res_pci_mem2;
+
+static struct resource rc32434_res_pci_mem1 = {
+	.name = "PCI MEM1",
+	.start = 0x50000000,
+	.end = 0x5FFFFFFF,
+	.flags = IORESOURCE_MEM,
+	.parent = &rc32434_res_pci_mem1,
+	.sibling = NULL,
+	.child = &rc32434_res_pci_mem2
+};
+
+static struct resource rc32434_res_pci_mem2 = {
+	.name = "PCI Mem2",
+	.start = 0x60000000,
+	.end = 0x6FFFFFFF,
+	.flags = IORESOURCE_MEM,
+	.parent = &rc32434_res_pci_mem1,
+	.sibling = NULL,
+	.child = NULL
+};
+
+static struct resource rc32434_res_pci_io1 = {
+	.name = "PCI I/O1",
+	.start = 0x18800000,
+	.end = 0x188FFFFF,
+	.flags = IORESOURCE_IO,
+};
+
+extern struct pci_ops rc32434_pci_ops;
+
+#define PCI_MEM1_START	PCI_ADDR_START
+#define PCI_MEM1_END	(PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1)
+#define PCI_MEM2_START	(PCI_ADDR_START + CPUTOPCI_MEM_WIN)
+#define PCI_MEM2_END	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN)  - 1)
+#define PCI_IO1_START	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN))
+#define PCI_IO1_END 							\
+	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN - 1)
+#define PCI_IO2_START							\
+	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN)
+#define PCI_IO2_END 							\
+	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) - 1)
+
+struct pci_controller rc32434_controller2;
+
+struct pci_controller rc32434_controller = {
+	.pci_ops = &rc32434_pci_ops,
+	.mem_resource = &rc32434_res_pci_mem1,
+	.io_resource = &rc32434_res_pci_io1,
+	.mem_offset = 0,
+	.io_offset = 0,
+
+};
+
+#ifdef __MIPSEB__
+#define PCI_ENDIAN_FLAG PCILBAC_sb_m
+#else
+#define PCI_ENDIAN_FLAG 0
+#endif
+
+static int __init rc32434_pcibridge_init(void)
+{
+	unsigned int pcicvalue, pcicdata = 0;
+	unsigned int dummyread, pcicntlval;
+	int loopCount;
+	unsigned int pci_config_addr;
+
+	pcicvalue = rc32434_pci->pcic;
+	pcicvalue = (pcicvalue >> PCIM_SHFT) & PCIM_BIT_LEN;
+	if (!((pcicvalue == PCIM_H_EA) ||
+	      (pcicvalue == PCIM_H_IA_FIX) ||
+	      (pcicvalue == PCIM_H_IA_RR))) {
+		pr_err(KERN_ERR "PCI init error!!!\n");
+		/* Not in Host Mode, return ERROR */
+		return -1;
+	}
+	/* Enables the Idle Grant mode, Arbiter Parking */
+	pcicdata |= (PCI_CTL_IGM | PCI_CTL_EAP | PCI_CTL_EN);
+	rc32434_pci->pcic = pcicdata;	/* Enable the PCI bus Interface */
+	/* Zero out the PCI status & PCI Status Mask */
+	for (;;) {
+		pcicdata = rc32434_pci->pcis;
+		if (!(pcicdata & PCI_STAT_RIP))
+			break;
+	}
+
+	rc32434_pci->pcis = 0;
+	rc32434_pci->pcism = 0xFFFFFFFF;
+	/* Zero out the PCI decoupled registers */
+	rc32434_pci->pcidac = 0;	/*
+					 * disable PCI decoupled accesses at
+					 * initialization
+					 */
+	rc32434_pci->pcidas = 0;	/* clear the status */
+	rc32434_pci->pcidasm = 0x0000007F;	/* Mask all the interrupts */
+	/* Mask PCI Messaging Interrupts */
+	rc32434_pci_msg->pciiic = 0;
+	rc32434_pci_msg->pciiim = 0xFFFFFFFF;
+	rc32434_pci_msg->pciioic = 0;
+	rc32434_pci_msg->pciioim = 0;
+
+
+	/* Setup PCILB0 as Memory Window */
+	rc32434_pci->pcilba[0].address = (unsigned int) (PCI_ADDR_START);
+
+	/* setup the PCI map address as same as the local address */
+
+	rc32434_pci->pcilba[0].mapping = (unsigned int) (PCI_ADDR_START);
+
+
+	/* Setup PCILBA1 as MEM */
+	rc32434_pci->pcilba[0].control =
+	    (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[0].control;	/* flush the CPU write Buffers */
+	rc32434_pci->pcilba[1].address = 0x60000000;
+	rc32434_pci->pcilba[1].mapping = 0x60000000;
+
+	/* setup PCILBA2 as IO Window */
+	rc32434_pci->pcilba[1].control =
+	    (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[1].control;	/* flush the CPU write Buffers */
+	rc32434_pci->pcilba[2].address = 0x18C00000;
+	rc32434_pci->pcilba[2].mapping = 0x18FFFFFF;
+
+	/* setup PCILBA2 as IO Window */
+	rc32434_pci->pcilba[2].control =
+	    (((SIZE_4MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[2].control;	/* flush the CPU write Buffers */
+
+	/* Setup PCILBA3 as IO Window */
+	rc32434_pci->pcilba[3].address = 0x18800000;
+	rc32434_pci->pcilba[3].mapping = 0x18800000;
+	rc32434_pci->pcilba[3].control =
+	    ((((SIZE_1MB & 0x1ff) << PCI_LBAC_SIZE_BIT) | PCI_LBAC_MSI) |
+	     PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[3].control;	/* flush the CPU write Buffers */
+
+	pci_config_addr = (unsigned int) (0x80000004);
+	for (loopCount = 0; loopCount < 24; loopCount++) {
+		rc32434_pci->pcicfga = pci_config_addr;
+		dummyread = rc32434_pci->pcicfga;
+		rc32434_pci->pcicfgd = korina_cnfg_regs[loopCount];
+		dummyread = rc32434_pci->pcicfgd;
+		pci_config_addr += 4;
+	}
+	rc32434_pci->pcitc =
+	    (unsigned int) ((PCITC_RTIMER_VAL & 0xff) << PCI_TC_RTIMER_BIT) |
+	    ((PCITC_DTIMER_VAL & 0xff) << PCI_TC_DTIMER_BIT);
+
+	pcicntlval = rc32434_pci->pcic;
+	pcicntlval &= ~PCI_CTL_TNR;
+	rc32434_pci->pcic = pcicntlval;
+	pcicntlval = rc32434_pci->pcic;
+
+	return 0;
+}
+
+static int __init rc32434_pci_init(void)
+{
+	pr_info("PCI: Initializing PCI\n");
+
+	ioport_resource.start = rc32434_res_pci_io1.start;
+	ioport_resource.end = rc32434_res_pci_io1.end;
+
+	rc32434_pcibridge_init();
+
+	register_pci_controller(&rc32434_controller);
+	rc32434_sync();
+
+	return 0;
+}
+
+arch_initcall(rc32434_pci_init);
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index 2a09ad91ec8c..bf639590b8b2 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -210,7 +210,6 @@ static int __init sb1250_pcibios_init(void)
 	void __iomem *io_map_base;
 	uint32_t cmdreg;
 	uint64_t reg;
-	extern int pci_probe_only;
 
 	/* CFE will assign PCI resources */
 	pci_probe_only = 1;
@@ -254,9 +253,6 @@ static int __init sb1250_pcibios_init(void)
 	 * works correctly with most of Linux's drivers.
 	 * XXX ehs: Should this happen in PCI Device mode?
 	 */
-	isa_slot_offset = (unsigned long)
-	    ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024);
-
 	io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
 	sb1250_controller.io_map_base = io_map_base;
 	set_io_port_base((unsigned long)io_map_base);
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
new file mode 100644
index 000000000000..27e86a09dd41
--- /dev/null
+++ b/arch/mips/pci/pci-tx4927.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/mips/pci/pci-tx4927.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4927.h>
+
+int __init tx4927_report_pciclk(void)
+{
+	int pciclk = 0;
+
+	printk(KERN_INFO "PCIC --%s PCICLK:",
+	       (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) ?
+	       " PCI66" : "");
+	if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) {
+		u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg);
+		switch ((unsigned long)ccfg &
+			TX4927_CCFG_PCIDIVMODE_MASK) {
+		case TX4927_CCFG_PCIDIVMODE_2_5:
+			pciclk = txx9_cpu_clock * 2 / 5; break;
+		case TX4927_CCFG_PCIDIVMODE_3:
+			pciclk = txx9_cpu_clock / 3; break;
+		case TX4927_CCFG_PCIDIVMODE_5:
+			pciclk = txx9_cpu_clock / 5; break;
+		case TX4927_CCFG_PCIDIVMODE_6:
+			pciclk = txx9_cpu_clock / 6; break;
+		}
+		printk("Internal(%u.%uMHz)",
+		       (pciclk + 50000) / 1000000,
+		       ((pciclk + 50000) / 100000) % 10);
+	} else {
+		printk("External");
+		pciclk = -1;
+	}
+	printk("\n");
+	return pciclk;
+}
+
+int __init tx4927_pciclk66_setup(void)
+{
+	int pciclk;
+
+	/* Assert M66EN */
+	tx4927_ccfg_set(TX4927_CCFG_PCI66);
+	/* Double PCICLK (if possible) */
+	if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) {
+		unsigned int pcidivmode = 0;
+		u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg);
+		pcidivmode = (unsigned long)ccfg &
+			TX4927_CCFG_PCIDIVMODE_MASK;
+		switch (pcidivmode) {
+		case TX4927_CCFG_PCIDIVMODE_5:
+		case TX4927_CCFG_PCIDIVMODE_2_5:
+			pcidivmode = TX4927_CCFG_PCIDIVMODE_2_5;
+			pciclk = txx9_cpu_clock * 2 / 5;
+			break;
+		case TX4927_CCFG_PCIDIVMODE_6:
+		case TX4927_CCFG_PCIDIVMODE_3:
+		default:
+			pcidivmode = TX4927_CCFG_PCIDIVMODE_3;
+			pciclk = txx9_cpu_clock / 3;
+		}
+		tx4927_ccfg_change(TX4927_CCFG_PCIDIVMODE_MASK,
+				   pcidivmode);
+		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+		       (unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg));
+	} else
+		pciclk = -1;
+	return pciclk;
+}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
new file mode 100644
index 000000000000..e5375511c2b7
--- /dev/null
+++ b/arch/mips/pci/pci-tx4938.c
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/mips/pci/pci-tx4938.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4938.h>
+
+int __init tx4938_report_pciclk(void)
+{
+	int pciclk = 0;
+
+	printk(KERN_INFO "PCIC --%s PCICLK:",
+	       (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) ?
+	       " PCI66" : "");
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) {
+		u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
+		switch ((unsigned long)ccfg &
+			TX4938_CCFG_PCIDIVMODE_MASK) {
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pciclk = txx9_cpu_clock / 4; break;
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pciclk = txx9_cpu_clock * 2 / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pciclk = txx9_cpu_clock / 5; break;
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+			pciclk = txx9_cpu_clock * 2 / 11; break;
+		case TX4938_CCFG_PCIDIVMODE_8:
+			pciclk = txx9_cpu_clock / 8; break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+			pciclk = txx9_cpu_clock / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+			pciclk = txx9_cpu_clock / 10; break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+			pciclk = txx9_cpu_clock / 11; break;
+		}
+		printk("Internal(%u.%uMHz)",
+		       (pciclk + 50000) / 1000000,
+		       ((pciclk + 50000) / 100000) % 10);
+	} else {
+		printk("External");
+		pciclk = -1;
+	}
+	printk("\n");
+	return pciclk;
+}
+
+void __init tx4938_report_pci1clk(void)
+{
+	__u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
+	unsigned int pciclk =
+		txx9_gbus_clock / ((ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2);
+
+	printk(KERN_INFO "PCIC1 -- %sPCICLK:%u.%uMHz\n",
+	       (ccfg & TX4938_CCFG_PCI1_66) ? "PCI66 " : "",
+	       (pciclk + 50000) / 1000000,
+	       ((pciclk + 50000) / 100000) % 10);
+}
+
+int __init tx4938_pciclk66_setup(void)
+{
+	int pciclk;
+
+	/* Assert M66EN */
+	tx4938_ccfg_set(TX4938_CCFG_PCI66);
+	/* Double PCICLK (if possible) */
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) {
+		unsigned int pcidivmode = 0;
+		u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
+		pcidivmode = (unsigned long)ccfg &
+			TX4938_CCFG_PCIDIVMODE_MASK;
+		switch (pcidivmode) {
+		case TX4938_CCFG_PCIDIVMODE_8:
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
+			pciclk = txx9_cpu_clock / 4;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
+			pciclk = txx9_cpu_clock * 2 / 9;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
+			pciclk = txx9_cpu_clock / 5;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+		default:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
+			pciclk = txx9_cpu_clock * 2 / 11;
+			break;
+		}
+		tx4938_ccfg_change(TX4938_CCFG_PCIDIVMODE_MASK,
+				   pcidivmode);
+		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+		       (unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg));
+	} else
+		pciclk = -1;
+	return pciclk;
+}
+
+int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
+{
+	if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) {
+		switch (slot) {
+		case TX4927_PCIC_IDSEL_AD_TO_SLOT(31):
+			if (__raw_readq(&tx4938_ccfgptr->pcfg) &
+			    TX4938_PCFG_ETH0_SEL)
+				return TXX9_IRQ_BASE + TX4938_IR_ETH0;
+			break;
+		case TX4927_PCIC_IDSEL_AD_TO_SLOT(30):
+			if (__raw_readq(&tx4938_ccfgptr->pcfg) &
+			    TX4938_PCFG_ETH1_SEL)
+				return TXX9_IRQ_BASE + TX4938_IR_ETH1;
+			break;
+		}
+		return 0;
+	}
+	return -1;
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 358ad6210949..77bd5b68dc43 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -29,8 +29,7 @@ unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
  * The PCI controller list.
  */
 
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
+static struct pci_controller *hose_head, **hose_tail = &hose_head;
 
 unsigned long PCIBIOS_MIN_IO	= 0x0000;
 unsigned long PCIBIOS_MIN_MEM	= 0;
@@ -205,7 +204,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index 6380662bbf3c..678388fd34b1 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -345,42 +345,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
         return pcibios_enable_resources(dev);
 }
 
-
-
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-                             struct resource *res, int resource)
-{
-        u32 new, check;
-        int reg;
-
-        return;
-
-        new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-        if (resource < 6) {
-                reg = PCI_BASE_ADDRESS_0 + 4 * resource;
-        } else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-                reg = dev->rom_base_reg;
-        } else {
-                /*
-                 * Somebody might have asked allocation of a non-standard
-                 * resource
-                 */
-                return;
-        }
-
-        pci_write_config_dword(dev, reg, new);
-        pci_read_config_dword(dev, reg, &check);
-        if ((new ^ check) &
-            ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK :
-             PCI_BASE_ADDRESS_MEM_MASK)) {
-                printk(KERN_ERR "PCI: Error while updating region "
-                       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-                       new, check);
-        }
-}
-
-
 void pcibios_align_resource(void *data, struct resource *res,
                             resource_size_t size, resource_size_t align)
 {
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index 35dc435846a6..cf4c868715ac 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -64,7 +64,7 @@ static void prom_exit(void)
 #ifdef CONFIG_SMP
 	if (smp_processor_id())
 		/* CPU 1 */
-		smp_call_function(prom_cpu0_exit, NULL, 1, 1);
+		smp_call_function(prom_cpu0_exit, NULL, 1);
 #endif
 	prom_cpu0_exit(NULL);
 }
diff --git a/arch/mips/rb532/Makefile b/arch/mips/rb532/Makefile
new file mode 100644
index 000000000000..8f0b6b6a1625
--- /dev/null
+++ b/arch/mips/rb532/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the RB532 board specific parts of the kernel
+#
+
+obj-y	 += irq.o time.o setup.o serial.o prom.o gpio.o devices.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
new file mode 100644
index 000000000000..44fb0a62877f
--- /dev/null
+++ b/arch/mips/rb532/devices.c
@@ -0,0 +1,331 @@
+/*
+ *  RouterBoard 500 Platform devices
+ *
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/dma.h>
+#include <asm/mach-rc32434/dma_v.h>
+#include <asm/mach-rc32434/eth.h>
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/integ.h>
+#include <asm/mach-rc32434/gpio.h>
+
+#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
+
+#define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+#define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+
+/* NAND definitions */
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+extern char *board_type;
+
+static struct resource korina_dev0_res[] = {
+	{
+		.name = "korina_regs",
+		.start = ETH0_BASE_ADDR,
+		.end = ETH0_BASE_ADDR + sizeof(struct eth_regs),
+		.flags = IORESOURCE_MEM,
+	 }, {
+		.name = "korina_rx",
+		.start = ETH0_DMA_RX_IRQ,
+		.end = ETH0_DMA_RX_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_tx",
+		.start = ETH0_DMA_TX_IRQ,
+		.end = ETH0_DMA_TX_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_ovr",
+		.start = ETH0_RX_OVR_IRQ,
+		.end = ETH0_RX_OVR_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_und",
+		.start = ETH0_TX_UND_IRQ,
+		.end = ETH0_TX_UND_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_dma_rx",
+		.start = ETH0_RX_DMA_ADDR,
+		.end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	 }, {
+		.name = "korina_dma_tx",
+		.start = ETH0_TX_DMA_ADDR,
+		.end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	 }
+};
+
+static struct korina_device korina_dev0_data = {
+	.name = "korina0",
+	.mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
+};
+
+static struct platform_device korina_dev0 = {
+	.id = 0,
+	.name = "korina",
+	.dev.platform_data = &korina_dev0_data,
+	.resource = korina_dev0_res,
+	.num_resources = ARRAY_SIZE(korina_dev0_res),
+};
+
+#define CF_GPIO_NUM 13
+
+static struct resource cf_slot0_res[] = {
+	{
+		.name = "cf_membase",
+		.flags = IORESOURCE_MEM
+	}, {
+		.name = "cf_irq",
+		.start = (8 + 4 * 32 + CF_GPIO_NUM),	/* 149 */
+		.end = (8 + 4 * 32 + CF_GPIO_NUM),
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct cf_device cf_slot0_data = {
+	.gpio_pin = 13
+};
+
+static struct platform_device cf_slot0 = {
+	.id = 0,
+	.name = "pata-rb532-cf",
+	.dev.platform_data = &cf_slot0_data,
+	.resource = cf_slot0_res,
+	.num_resources = ARRAY_SIZE(cf_slot0_res),
+};
+
+/* Resources and device for NAND */
+static int rb532_dev_ready(struct mtd_info *mtd)
+{
+	return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+	unsigned char orbits, nandbits;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		orbits = (ctrl & NAND_CLE) << 1;
+		orbits |= (ctrl & NAND_ALE) >> 1;
+
+		nandbits = (~ctrl & NAND_CLE) << 1;
+		nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+		set_latch_u5(orbits, nandbits);
+	}
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static struct resource nand_slot0_res[] = {
+	[0] = {
+		.name = "nand_membase",
+		.flags = IORESOURCE_MEM
+	}
+};
+
+static struct platform_nand_data rb532_nand_data = {
+	.ctrl.dev_ready = rb532_dev_ready,
+	.ctrl.cmd_ctrl	= rb532_cmd_ctrl,
+};
+
+static struct platform_device nand_slot0 = {
+	.name = "gen_nand",
+	.id = -1,
+	.resource = nand_slot0_res,
+	.num_resources = ARRAY_SIZE(nand_slot0_res),
+	.dev.platform_data = &rb532_nand_data,
+};
+
+static struct mtd_partition rb532_partition_info[] = {
+	{
+		.name = "Routerboard NAND boot",
+		.offset = 0,
+		.size = 4 * 1024 * 1024,
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device rb532_led = {
+	.name = "rb532-led",
+	.id = 0,
+};
+
+static struct gpio_keys_button rb532_gpio_btn[] = {
+	{
+		.gpio = 1,
+		.code = BTN_0,
+		.desc = "S1",
+		.active_low = 1,
+	}
+};
+
+static struct gpio_keys_platform_data rb532_gpio_btn_data = {
+	.buttons = rb532_gpio_btn,
+	.nbuttons = ARRAY_SIZE(rb532_gpio_btn),
+};
+
+static struct platform_device rb532_button = {
+	.name 	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rb532_gpio_btn_data,
+	}
+};
+
+static struct resource rb532_wdt_res[] = {
+	{
+		.name = "rb532_wdt_res",
+		.start = INTEG0_BASE_ADDR,
+		.end = INTEG0_BASE_ADDR + sizeof(struct integ),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device rb532_wdt = {
+	.name 		= "rc32434_wdt",
+	.id 		= -1,
+	.resource 	= rb532_wdt_res,
+	.num_resources	= ARRAY_SIZE(rb532_wdt_res),
+};
+
+static struct platform_device *rb532_devs[] = {
+	&korina_dev0,
+	&nand_slot0,
+	&cf_slot0,
+	&rb532_led,
+	&rb532_button,
+	&rb532_wdt
+};
+
+static void __init parse_mac_addr(char *macstr)
+{
+	int i, j;
+	unsigned char result, value;
+
+	for (i = 0; i < 6; i++) {
+		result = 0;
+
+		if (i != 5 && *(macstr + 2) != ':')
+			return;
+
+		for (j = 0; j < 2; j++) {
+			if (isxdigit(*macstr)
+			    && (value =
+				isdigit(*macstr) ? *macstr -
+				'0' : toupper(*macstr) - 'A' + 10) < 16) {
+				result = result * 16 + value;
+				macstr++;
+			} else
+				return;
+		}
+
+		macstr++;
+		korina_dev0_data.mac[i] = result;
+	}
+}
+
+
+/* DEVICE CONTROLLER 1 */
+#define CFG_DC_DEV1 	((void *)0xb8010010)
+#define CFG_DC_DEV2 	((void *)0xb8010020)
+#define CFG_DC_DEVBASE    0x0
+#define CFG_DC_DEVMASK    0x4
+#define CFG_DC_DEVC       0x8
+#define CFG_DC_DEVTC      0xC
+
+/* NAND definitions */
+#define NAND_CHIP_DELAY	25
+
+static void __init rb532_nand_setup(void)
+{
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
+		set_latch_u5(LO_FOFF | LO_CEX,
+				LO_ULED | LO_ALE | LO_CLE | LO_WPX);
+		break;
+	default:
+		set_latch_u5(LO_WPX | LO_FOFF | LO_CEX,
+				LO_ULED | LO_ALE | LO_CLE);
+		break;
+	}
+
+	/* Setup NAND specific settings */
+	rb532_nand_data.chip.nr_chips = 1;
+	rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
+	rb532_nand_data.chip.partitions = rb532_partition_info;
+	rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+	rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
+}
+
+
+static int __init plat_setup_devices(void)
+{
+	/* Look for the CF card reader */
+	if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
+		rb532_devs[1] = NULL;
+	else {
+		cf_slot0_res[0].start =
+		    readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
+	}
+
+	/* Read the NAND resources from the device controller */
+	nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
+	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
+
+	/* Initialise the NAND device */
+	rb532_nand_setup();
+
+	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+}
+
+static int __init setup_kmac(char *s)
+{
+	printk(KERN_INFO "korina mac = %s\n", s);
+	parse_mac_addr(s);
+	return 0;
+}
+
+__setup("kmac=", setup_kmac);
+
+arch_initcall(plat_setup_devices);
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
new file mode 100644
index 000000000000..b2fe82dba0a5
--- /dev/null
+++ b/arch/mips/rb532/gpio.c
@@ -0,0 +1,220 @@
+/*
+ *  Miscellaneous functions for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Phil Sutter <n0-1@freewrt.org>
+ *  Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-rc32434/rb.h>
+
+struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
+EXPORT_SYMBOL(rb532_gpio_reg0);
+
+struct mpmc_device dev3;
+
+static struct resource rb532_gpio_reg0_res[] = {
+	{
+		.name 	= "gpio_reg0",
+		.start 	= (u32)(IDT434_REG_BASE + GPIOBASE),
+		.end 	= (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+		.flags 	= IORESOURCE_MEM,
+	}
+};
+
+static struct resource rb532_dev3_ctl_res[] = {
+	{
+		.name	= "dev3_ctl",
+		.start	= (u32)(IDT434_REG_BASE + DEV3BASE),
+		.end	= (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
+{
+	unsigned flags, data;
+	unsigned i = 0;
+
+	spin_lock_irqsave(&dev3.lock, flags);
+
+	data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+	for (i = 0; i != len; ++i) {
+		if (val & (1 << i))
+			data |= (1 << (i + bit));
+		else
+			data &= ~(1 << (i + bit));
+	}
+	writel(data, (IDT434_REG_BASE + reg_offs));
+
+	spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_434_reg);
+
+unsigned get_434_reg(unsigned reg_offs)
+{
+	return readl(IDT434_REG_BASE + reg_offs);
+}
+EXPORT_SYMBOL(get_434_reg);
+
+void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+{
+	unsigned flags;
+
+	spin_lock_irqsave(&dev3.lock, flags);
+
+	dev3.state = (dev3.state | or_mask) & ~nand_mask;
+	writel(dev3.state, &dev3.base);
+
+	spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_latch_u5);
+
+unsigned char get_latch_u5(void)
+{
+	return dev3.state;
+}
+EXPORT_SYMBOL(get_latch_u5);
+
+int rb532_gpio_get_value(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_value);
+
+void rb532_gpio_set_value(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+
+	writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+}
+EXPORT_SYMBOL(rb532_gpio_set_value);
+
+int rb532_gpio_direction_input(unsigned gpio)
+{
+	writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
+	       (void *)&rb532_gpio_reg0->gpiocfg);
+
+	return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_input);
+
+int rb532_gpio_direction_output(unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+	writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
+	       (void *)&rb532_gpio_reg0->gpiocfg);
+
+	return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_output);
+
+void rb532_gpio_set_int_level(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_level);
+
+int rb532_gpio_get_int_level(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_level);
+
+void rb532_gpio_set_int_status(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpioistat);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_status);
+
+int rb532_gpio_get_int_status(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_status);
+
+void rb532_gpio_set_func(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpiofunc);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+}
+EXPORT_SYMBOL(rb532_gpio_set_func);
+
+int rb532_gpio_get_func(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_func);
+
+int __init rb532_gpio_init(void)
+{
+	rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
+				rb532_gpio_reg0_res[0].end -
+				rb532_gpio_reg0_res[0].start);
+
+	if (!rb532_gpio_reg0) {
+		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
+		return -ENXIO;
+	}
+
+	dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
+				rb532_dev3_ctl_res[0].end -
+				rb532_dev3_ctl_res[0].start);
+
+	if (!dev3.base) {
+		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+arch_initcall(rb532_gpio_init);
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
new file mode 100644
index 000000000000..c0d0f950caf2
--- /dev/null
+++ b/arch/mips/rb532/irq.c
@@ -0,0 +1,209 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              stevel@mvista.com or source@mvista.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+struct intr_group {
+	u32 mask;	/* mask of valid bits in pending/mask registers */
+	volatile u32 *base_addr;
+};
+
+#define RC32434_NR_IRQS  (GROUP4_IRQ_BASE + 32)
+
+#if (NR_IRQS < RC32434_NR_IRQS)
+#error Too little irqs defined. Did you override <asm/irq.h> ?
+#endif
+
+static const struct intr_group intr_group[NUM_INTR_GROUPS] = {
+	{
+		.mask	= 0x0000efff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x00001fff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x00000007,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x0003ffff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0xffffffff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
+};
+
+#define READ_PEND(base) (*(base))
+#define READ_MASK(base) (*(base + 2))
+#define WRITE_MASK(base, val) (*(base + 2) = (val))
+
+static inline int irq_to_group(unsigned int irq_nr)
+{
+	return (irq_nr - GROUP0_IRQ_BASE) >> 5;
+}
+
+static inline int group_to_ip(unsigned int group)
+{
+	return group + 2;
+}
+
+static inline void enable_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	set_c0_status(ipnum);
+}
+
+static inline void disable_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	clear_c0_status(ipnum);
+}
+
+static inline void ack_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	clear_c0_cause(ipnum);
+}
+
+static void rb532_enable_irq(unsigned int irq_nr)
+{
+	int ip = irq_nr - GROUP0_IRQ_BASE;
+	unsigned int group, intr_bit;
+	volatile unsigned int *addr;
+
+	if (ip < 0)
+		enable_local_irq(irq_nr);
+	else {
+		group = ip >> 5;
+
+		ip &= (1 << 5) - 1;
+		intr_bit = 1 << ip;
+
+		enable_local_irq(group_to_ip(group));
+
+		addr = intr_group[group].base_addr;
+		WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
+	}
+}
+
+static void rb532_disable_irq(unsigned int irq_nr)
+{
+	int ip = irq_nr - GROUP0_IRQ_BASE;
+	unsigned int group, intr_bit, mask;
+	volatile unsigned int *addr;
+
+	if (ip < 0) {
+		disable_local_irq(irq_nr);
+	} else {
+		group = ip >> 5;
+
+		ip &= (1 << 5) - 1;
+		intr_bit = 1 << ip;
+		addr = intr_group[group].base_addr;
+		mask = READ_MASK(addr);
+		mask |= intr_bit;
+		WRITE_MASK(addr, mask);
+
+		/*
+		 * if there are no more interrupts enabled in this
+		 * group, disable corresponding IP
+		 */
+		if (mask == intr_group[group].mask)
+			disable_local_irq(group_to_ip(group));
+	}
+}
+
+static void rb532_mask_and_ack_irq(unsigned int irq_nr)
+{
+	rb532_disable_irq(irq_nr);
+	ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
+}
+
+static struct irq_chip rc32434_irq_type = {
+	.name		= "RB532",
+	.ack		= rb532_disable_irq,
+	.mask		= rb532_disable_irq,
+	.mask_ack	= rb532_mask_and_ack_irq,
+	.unmask		= rb532_enable_irq,
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	pr_info("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
+
+	for (i = 0; i < RC32434_NR_IRQS; i++)
+		set_irq_chip_and_handler(i,  &rc32434_irq_type,
+					handle_level_irq);
+}
+
+/* Main Interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int ip, pend, group;
+	volatile unsigned int *addr;
+	unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+	if (cp0_cause & CAUSEF_IP7) {
+		do_IRQ(7);
+	} else {
+		ip = (cp0_cause & 0x7c00);
+		if (ip) {
+			group = 21 + (fls(ip) - 32);
+
+			addr = intr_group[group].base_addr;
+
+			pend = READ_PEND(addr);
+			pend &= ~READ_MASK(addr);	/* only unmasked interrupts */
+			pend = 39 + (fls(pend) - 32);
+			do_IRQ((group << 5) + pend);
+		}
+	}
+}
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
new file mode 100644
index 000000000000..1bc0af8febf4
--- /dev/null
+++ b/arch/mips/rb532/prom.c
@@ -0,0 +1,158 @@
+/*
+ *  RouterBoard 500 specific prom routines
+ *
+ *  Copyright (C) 2003, Peter Sadik <peter.sadik@idt.com>
+ *  Copyright (C) 2005-2006, P.Christeas <p_christ@hol.gr>
+ *  Copyright (C) 2007, Gabor Juhos <juhosg@openwrt.org>
+ *			Felix Fietkau <nbd@openwrt.org>
+ *			Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-rc32434/ddr.h>
+#include <asm/mach-rc32434/prom.h>
+
+extern void __init setup_serial_port(void);
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+unsigned int gpio_bootup_state;
+EXPORT_SYMBOL(gpio_bootup_state);
+
+static struct resource ddr_reg[] = {
+	{
+		.name = "ddr-reg",
+		.start = DDR0_PHYS_ADDR,
+		.end = DDR0_PHYS_ADDR + sizeof(struct ddr_ram),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+void __init prom_free_prom_memory(void)
+{
+	/* No prom memory to free */
+}
+
+static inline int match_tag(char *arg, const char *tag)
+{
+	return strncmp(arg, tag, strlen(tag)) == 0;
+}
+
+static inline unsigned long tag2ul(char *arg, const char *tag)
+{
+	char *num;
+
+	num = arg + strlen(tag);
+	return simple_strtoul(num, 0, 10);
+}
+
+void __init prom_setup_cmdline(void)
+{
+	char cmd_line[CL_SIZE];
+	char *cp, *board;
+	int prom_argc;
+	char **prom_argv, **prom_envp;
+	int i;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+
+	cp = cmd_line;
+		/* Note: it is common that parameters start
+		 * at argv[1] and not argv[0],
+		 * however, our elf loader starts at [0] */
+	for (i = 0; i < prom_argc; i++) {
+		if (match_tag(prom_argv[i], FREQ_TAG)) {
+			idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG);
+			continue;
+		}
+#ifdef IGNORE_CMDLINE_MEM
+		/* parses out the "mem=xx" arg */
+		if (match_tag(prom_argv[i], MEM_TAG))
+			continue;
+#endif
+		if (i > 0)
+			*(cp++) = ' ';
+		if (match_tag(prom_argv[i], BOARD_TAG)) {
+			board = prom_argv[i] + strlen(BOARD_TAG);
+
+			if (match_tag(board, BOARD_RB532A))
+				mips_machtype = MACH_MIKROTIK_RB532A;
+			else
+				mips_machtype = MACH_MIKROTIK_RB532;
+		}
+
+		if (match_tag(prom_argv[i], GPIO_TAG))
+			gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
+
+		strcpy(cp, prom_argv[i]);
+		cp += strlen(prom_argv[i]);
+	}
+	*(cp++) = ' ';
+
+	i = strlen(arcs_cmdline);
+	if (i > 0) {
+		*(cp++) = ' ';
+		strcpy(cp, arcs_cmdline);
+		cp += strlen(arcs_cmdline);
+	}
+	if (gpio_bootup_state & 0x02)
+		strcpy(cp, GPIO_INIT_NOBUTTON);
+	else
+		strcpy(cp, GPIO_INIT_BUTTON);
+
+	cmd_line[CL_SIZE-1] = '\0';
+
+	strcpy(arcs_cmdline, cmd_line);
+}
+
+void __init prom_init(void)
+{
+	struct ddr_ram __iomem *ddr;
+	phys_t memsize;
+	phys_t ddrbase;
+
+	ddr = ioremap_nocache(ddr_reg[0].start,
+			ddr_reg[0].end - ddr_reg[0].start);
+
+	if (!ddr) {
+		printk(KERN_ERR "Unable to remap DDR register\n");
+		return;
+	}
+
+	ddrbase = (phys_t)&ddr->ddrbase;
+	memsize = (phys_t)&ddr->ddrmask;
+	memsize = 0 - memsize;
+
+	prom_setup_cmdline();
+
+	/* give all RAM to boot allocator,
+	 * except for the first 0x400 and the last 0x200 bytes */
+	add_memory_region(ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/jmr3927/rbhma3100/init.c b/arch/mips/rb532/serial.c
index 700b9cf8eb9d..1a05b5ddee09 100644
--- a/arch/mips/jmr3927/rbhma3100/init.c
+++ b/arch/mips/rb532/serial.c
@@ -1,11 +1,8 @@
 /*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
+ *  BRIEF MODULE DESCRIPTION
+ *     Serial port initialisation.
  *
- * arch/mips/jmr3927/common/init.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -27,31 +24,30 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <asm/bootinfo.h>
-#include <asm/jmr3927/jmr3927.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
-extern void  __init prom_init_cmdline(void);
+#include <asm/serial.h>
+#include <asm/mach-rc32434/rc32434.h>
 
-const char *get_system_type(void)
-{
-	return "Toshiba"
-#ifdef CONFIG_TOSHIBA_JMR3927
-	       " JMR_TX3927"
-#endif
-	;
-}
+extern unsigned int idt_cpu_freq;
 
-extern void puts(const char *cp);
+static struct uart_port rb532_uart = {
+	.type = PORT_16550A,
+	.line = 0,
+	.irq = RC32434_UART0_IRQ,
+	.iotype = UPIO_MEM,
+	.membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+	.regshift = 2
+};
 
-void __init prom_init(void)
+int __init setup_serial_port(void)
 {
-#ifdef CONFIG_TOSHIBA_JMR3927
-	/* CCFG */
-	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-		puts("Warning: TX3927 TLB off\n");
-#endif
+	rb532_uart.uartclk = idt_cpu_freq;
 
-	prom_init_cmdline();
-	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+	return early_serial_setup(&rb532_uart);
 }
+arch_initcall(setup_serial_port);
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
new file mode 100644
index 000000000000..7aafa95ac20b
--- /dev/null
+++ b/arch/mips/rb532/setup.c
@@ -0,0 +1,79 @@
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/ioport.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+struct pci_reg __iomem *pci_reg;
+EXPORT_SYMBOL(pci_reg);
+
+static struct resource pci0_res[] = {
+	{
+		.name = "pci_reg0",
+		.start = PCI0_BASE_ADDR,
+		.end = PCI0_BASE_ADDR + sizeof(struct pci_reg),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static void rb_machine_restart(char *command)
+{
+	/* just jump to the reset vector */
+	writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+	((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+	for (;;)
+		continue;
+}
+
+void __init plat_mem_setup(void)
+{
+	u32 val;
+
+	_machine_restart = rb_machine_restart;
+	_machine_halt = rb_machine_halt;
+	pm_power_off = rb_machine_halt;
+
+	set_io_port_base(KSEG1);
+
+	pci_reg = ioremap_nocache(pci0_res[0].start,
+				pci0_res[0].end - pci0_res[0].start);
+	if (!pci_reg) {
+		printk(KERN_ERR "Could not remap PCI registers\n");
+		return;
+	}
+
+	val = __raw_readl(&pci_reg->pcic);
+	val &= 0xFFFFFF7;
+	__raw_writel(val, (void *)&pci_reg->pcic);
+
+#ifdef CONFIG_PCI
+	/* Enable PCI interrupts in EPLD Mask register */
+	*epld_mask = 0x0;
+	*(epld_mask + 1) = 0x0;
+#endif
+	write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
+		return "Mikrotik RB532A";
+		break;
+	default:
+		return "Mikrotik RB532";
+		break;
+	}
+}
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
new file mode 100644
index 000000000000..db74edf8cefb
--- /dev/null
+++ b/arch/mips/rb532/time.c
@@ -0,0 +1,67 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ *  Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+
+#include <asm/mipsregs.h>
+#include <asm/debug.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+/*
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick. There is no RTC available.
+ *
+ * The RC32434 counts at half the CPU *core* speed.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+	mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
+
+	return mips_hpt_frequency / HZ;
+}
+
+void __init plat_time_init(void)
+{
+	unsigned int est_freq, flags;
+	unsigned long r4k_offset;
+
+	local_irq_save(flags);
+
+	printk(KERN_INFO "calculating r4koff... ");
+	r4k_offset = cal_r4koff();
+	printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+	est_freq = 2 * r4k_offset * HZ;
+	est_freq += 5000;	/* round */
+	est_freq -= est_freq % 10000;
+	printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+	       (est_freq % 1000000) * 100 / 1000000);
+	local_irq_restore(flags);
+}
diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 3f35d6367bec..5268ac187bbd 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -208,4 +208,30 @@ void __init sgimc_init(void)
 void __init prom_meminit(void) {}
 void __init prom_free_prom_memory(void)
 {
+#ifdef CONFIG_SGI_IP28
+	u32 mconfig1;
+	unsigned long flags;
+	spinlock_t lock;
+
+	/*
+	 * because ARCS accesses memory uncached we wait until ARCS
+	 * isn't needed any longer, before we switch from slow to
+	 * normal mode
+	 */
+	spin_lock_irqsave(&lock, flags);
+	mconfig1 = sgimc->mconfig1;
+	/* map ECC register */
+	sgimc->mconfig1 = (mconfig1 & 0xffff0000) | 0x2060;
+	iob();
+	/* switch to normal mode */
+	*(unsigned long *)PHYS_TO_XKSEG_UNCACHED(0x60000000) = 0;
+	iob();
+	/* reduce WR_COL */
+	sgimc->cmacc = (sgimc->cmacc & ~0xf) | 4;
+	iob();
+	/* restore old config */
+	sgimc->mconfig1 = mconfig1;
+	iob();
+	spin_unlock_irqrestore(&lock, flags);
+#endif
 }
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 28ffec8e5d1a..60141235ec40 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -175,3 +175,20 @@ static int __init sgiseeq_devinit(void)
 }
 
 device_initcall(sgiseeq_devinit);
+
+static int __init sgi_hal2_devinit(void)
+{
+	return IS_ERR(platform_device_register_simple("sgihal2", 0, NULL, 0));
+}
+
+device_initcall(sgi_hal2_devinit);
+
+static int __init sgi_button_devinit(void)
+{
+	if (ip22_is_fullhouse())
+		return 0; /* full house has no volume buttons */
+
+	return IS_ERR(platform_device_register_simple("sgibtns", -1, NULL, 0));
+}
+
+device_initcall(sgi_button_devinit);
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index a435b31cf031..4ad5c3393fd3 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -39,7 +39,7 @@
 #define POWERDOWN_FREQ		(HZ / 4)
 #define PANIC_FREQ		(HZ / 8)
 
-static struct timer_list power_timer, blink_timer, debounce_timer, volume_timer;
+static struct timer_list power_timer, blink_timer, debounce_timer;
 
 #define MACHINE_PANICED		1
 #define MACHINE_SHUTTING_DOWN	2
@@ -139,36 +139,6 @@ static inline void power_button(void)
 	add_timer(&power_timer);
 }
 
-void (*indy_volume_button)(int) = NULL;
-
-EXPORT_SYMBOL(indy_volume_button);
-
-static inline void volume_up_button(unsigned long data)
-{
-	del_timer(&volume_timer);
-
-	if (indy_volume_button)
-		indy_volume_button(1);
-
-	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
-}
-
-static inline void volume_down_button(unsigned long data)
-{
-	del_timer(&volume_timer);
-
-	if (indy_volume_button)
-		indy_volume_button(-1);
-
-	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
-}
-
 static irqreturn_t panel_int(int irq, void *dev_id)
 {
 	unsigned int buttons;
@@ -190,25 +160,8 @@ static irqreturn_t panel_int(int irq, void *dev_id)
 	 * House. Only lowest 2 bits are used. Guiness uses upper four bits
 	 * for volume control". This is not true, all bits are pulled high
 	 * on fullhouse */
-	if (ip22_is_fullhouse() || !(buttons & SGIOC_PANEL_POWERINTR)) {
+	if (!(buttons & SGIOC_PANEL_POWERINTR))
 		power_button();
-		return IRQ_HANDLED;
-	}
-	/* TODO: mute/unmute */
-	/* Volume up button was pressed */
-	if (!(buttons & SGIOC_PANEL_VOLUPINTR)) {
-		init_timer(&volume_timer);
-		volume_timer.function = volume_up_button;
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
-	/* Volume down button was pressed */
-	if (!(buttons & SGIOC_PANEL_VOLDNINTR)) {
-		init_timer(&volume_timer);
-		volume_timer.function = volume_down_button;
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index 48932ce1d730..d9c79d8be81d 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -4,6 +4,7 @@
  * Copyright 2000 - 2001 Kanoj Sarcar (kanoj@sgi.com)
  */
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/kernel.h>
 #include <linux/nodemask.h>
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 42cd10956306..060d853d7b35 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,8 +33,6 @@
 #define SLOT_PFNSHIFT           (SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT           (NASID_SHFT - PAGE_SHIFT)
 
-static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
-
 struct node_data *__node_data[MAX_COMPACT_NODES];
 
 EXPORT_SYMBOL(__node_data);
@@ -403,7 +401,7 @@ static void __init node_mem_init(cnodeid_t node)
 	 */
 	__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
 
-	NODE_DATA(node)->bdata = &plat_node_bdata[node];
+	NODE_DATA(node)->bdata = &bootmem_node_data[node];
 	NODE_DATA(node)->node_start_pfn = start_pfn;
 	NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c
index b0a25e1ee8b7..64459e7d891b 100644
--- a/arch/mips/sgi-ip27/ip27-nmi.c
+++ b/arch/mips/sgi-ip27/ip27-nmi.c
@@ -1,4 +1,3 @@
-#include <linux/kallsyms.h>
 #include <linux/kernel.h>
 #include <linux/mmzone.h>
 #include <linux/nodemask.h>
@@ -84,13 +83,10 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 	/*
 	 * Saved cp0 registers
 	 */
-	printk("epc   : %016lx ", nr->epc);
-	print_symbol("%s ", nr->epc);
+	printk("epc   : %016lx %pS\n", nr->epc, (void *) nr->epc);
 	printk("%s\n", print_tainted());
-	printk("ErrEPC: %016lx ", nr->error_epc);
-	print_symbol("%s\n", nr->error_epc);
-	printk("ra    : %016lx ", nr->gpr[31]);
-	print_symbol("%s\n", nr->gpr[31]);
+	printk("ErrEPC: %016lx %pS\n", nr->error_epc, (void *) nr->error_epc);
+	printk("ra    : %016lx %pS\n", nr->gpr[31], (void *) nr->gpr[31]);
 	printk("Status: %08lx         ", nr->sr);
 
 	if (nr->sr & ST0_KX)
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 89a71f49b692..3d63721e0e80 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -65,6 +65,31 @@ static __init int meth_devinit(void)
 
 device_initcall(meth_devinit);
 
+static __init int sgio2audio_devinit(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("sgio2audio", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
+static __init int sgio2btns_devinit(void)
+{
+	return IS_ERR(platform_device_register_simple("sgibtns", -1, NULL, 0));
+}
+
+device_initcall(sgio2btns_devinit);
+
 MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index 33fce826f8bf..fd9604d5555a 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -74,7 +74,7 @@ static void __noreturn cfe_linux_exit(void *arg)
 		if (!reboot_smp) {
 			/* Get CPU 0 to do the cfe_exit */
 			reboot_smp = 1;
-			smp_call_function(cfe_linux_exit, arg, 1, 0);
+			smp_call_function(cfe_linux_exit, arg, 0);
 		}
 	} else {
 		printk("Passing control back to CFE...\n");
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 63b444eaf01e..66e3e3fb311f 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/errno.h>
@@ -402,18 +403,26 @@ static int sbprof_zbprof_stop(void)
 static int sbprof_tb_open(struct inode *inode, struct file *filp)
 {
 	int minor;
+	int err = 0;
 
+	lock_kernel();
 	minor = iminor(inode);
-	if (minor != 0)
-		return -ENODEV;
+	if (minor != 0) {
+		err = -ENODEV;
+		goto out;
+	}
 
-	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
-		return -EBUSY;
+	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) {
+		err = -EBUSY;
+		goto out;
+	}
 
 	memset(&sbp, 0, sizeof(struct sbprof_tb));
 	sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
-	if (!sbp.sbprof_tbbuf)
-		return -ENOMEM;
+	if (!sbp.sbprof_tbbuf) {
+		err = -ENOMEM;
+		goto out;
+	}
 	memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
 	init_waitqueue_head(&sbp.tb_sync);
 	init_waitqueue_head(&sbp.tb_read);
@@ -421,7 +430,9 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp)
 
 	sbp.open = SB_OPEN;
 
-	return 0;
+  out:
+	unlock_kernel();
+	return err;
 }
 
 static int sbprof_tb_release(struct inode *inode, struct file *filp)
@@ -565,7 +576,8 @@ static int __init sbprof_tb_init(void)
 
 	tb_class = tbc;
 
-	dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
+	dev = device_create_drvdata(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0),
+				    NULL, "tb");
 	if (IS_ERR(dev)) {
 		err = PTR_ERR(dev);
 		goto out_class;
diff --git a/arch/mips/sibyte/sb1250/prom.c b/arch/mips/sibyte/sb1250/prom.c
index cf8f6b3de86c..65b1af66b674 100644
--- a/arch/mips/sibyte/sb1250/prom.c
+++ b/arch/mips/sibyte/sb1250/prom.c
@@ -66,7 +66,7 @@ static void prom_linux_exit(void)
 {
 #ifdef CONFIG_SMP
 	if (smp_processor_id()) {
-		smp_call_function(prom_cpu0_exit, NULL, 1, 1);
+		smp_call_function(prom_cpu0_exit, NULL, 1);
 	}
 #endif
 	while(1);
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 1775755a2619..255d692bfa18 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,3 +1,4 @@
 obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
 
+obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
 obj-$(CONFIG_KGDB)		+= dbg_io.o
diff --git a/arch/mips/sibyte/swarm/swarm-i2c.c b/arch/mips/sibyte/swarm/swarm-i2c.c
new file mode 100644
index 000000000000..4282ac9d01d2
--- /dev/null
+++ b/arch/mips/sibyte/swarm/swarm-i2c.c
@@ -0,0 +1,37 @@
+/*
+ *	arch/mips/sibyte/swarm/swarm-i2c.c
+ *
+ *	Broadcom BCM91250A (SWARM), etc. I2C platform setup.
+ *
+ *	Copyright (c) 2008  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+
+static struct i2c_board_info swarm_i2c_info1[] __initdata = {
+	{
+		I2C_BOARD_INFO("m41t81", 0x68),
+	},
+};
+
+static int __init swarm_i2c_init(void)
+{
+	int err;
+
+	err = i2c_register_board_info(1, swarm_i2c_info1,
+				      ARRAY_SIZE(swarm_i2c_info1));
+	if (err < 0)
+		printk(KERN_ERR
+		       "swarm-i2c: cannot register board I2C devices\n");
+	return err;
+}
+
+arch_initcall(swarm_i2c_init);
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 5484e1c62054..a49272ce7ef5 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -116,7 +116,6 @@ void __init plat_mem_setup(void)
 	/*
 	 * Setup (E)ISA I/O memory access stuff
 	 */
-	isa_slot_offset = CKSEG1ADDR(0xb0000000);
 #ifdef CONFIG_EISA
 	EISA_bus = 1;
 #endif
diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig
deleted file mode 100644
index 5fbbe12e0fc1..000000000000
--- a/arch/mips/tx4927/Kconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-config TOSHIBA_FPCIB0
-	bool "FPCIB0 Backplane Support"
-	depends on TOSHIBA_RBTX4927
diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile
deleted file mode 100644
index a7fe76a64964..000000000000
--- a/arch/mips/tx4927/common/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for common code for Toshiba TX4927 based systems
-#
-
-obj-y	+= tx4927_prom.o tx4927_irq.o
-
-obj-$(CONFIG_TOSHIBA_FPCIB0)	   += smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)                 += tx4927_dbgio.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile
deleted file mode 100644
index 13f96725d772..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y	+= toshiba_rbtx4927_prom.o
-obj-y	+= toshiba_rbtx4927_setup.o
-obj-y	+= toshiba_rbtx4927_irq.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
deleted file mode 100644
index 6d31f2a98abf..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * linux/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
- *
- * Toshiba RBTX4927 specific interrupt handlers
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-/*
-IRQ  Device
-00   RBTX4927-ISA/00
-01   RBTX4927-ISA/01 PS2/Keyboard
-02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03   RBTX4927-ISA/03
-04   RBTX4927-ISA/04
-05   RBTX4927-ISA/05
-06   RBTX4927-ISA/06
-07   RBTX4927-ISA/07
-08   RBTX4927-ISA/08
-09   RBTX4927-ISA/09
-10   RBTX4927-ISA/10
-11   RBTX4927-ISA/11
-12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13   RBTX4927-ISA/13
-14   RBTX4927-ISA/14 IDE
-15   RBTX4927-ISA/15
-
-16   TX4927-CP0/00 Software 0
-17   TX4927-CP0/01 Software 1
-18   TX4927-CP0/02 Cascade TX4927-CP0
-19   TX4927-CP0/03 Multiplexed -- do not use
-20   TX4927-CP0/04 Multiplexed -- do not use
-21   TX4927-CP0/05 Multiplexed -- do not use
-22   TX4927-CP0/06 Multiplexed -- do not use
-23   TX4927-CP0/07 CPU TIMER
-
-24   TX4927-PIC/00
-25   TX4927-PIC/01
-26   TX4927-PIC/02
-27   TX4927-PIC/03 Cascade RBTX4927-IOC
-28   TX4927-PIC/04
-29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30   TX4927-PIC/06
-31   TX4927-PIC/07
-32   TX4927-PIC/08 TX4927 SerialIO Channel 0
-33   TX4927-PIC/09 TX4927 SerialIO Channel 1
-34   TX4927-PIC/10
-35   TX4927-PIC/11
-36   TX4927-PIC/12
-37   TX4927-PIC/13
-38   TX4927-PIC/14
-39   TX4927-PIC/15
-40   TX4927-PIC/16 TX4927 PCI PCI-C
-41   TX4927-PIC/17
-42   TX4927-PIC/18
-43   TX4927-PIC/19
-44   TX4927-PIC/20
-45   TX4927-PIC/21
-46   TX4927-PIC/22 TX4927 PCI PCI-ERR
-47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48   TX4927-PIC/24
-49   TX4927-PIC/25
-50   TX4927-PIC/26
-51   TX4927-PIC/27
-52   TX4927-PIC/28
-53   TX4927-PIC/29
-54   TX4927-PIC/30
-55   TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/timex.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/wbflush.h>
-#include <linux/bootmem.h>
-#include <linux/blkdev.h>
-#ifdef CONFIG_TOSHIBA_FPCIB0
-#include <asm/i8259.h>
-#include <asm/tx4927/smsc_fdc37m81x.h>
-#endif
-#include <asm/tx4927/toshiba_rbtx4927.h>
-
-
-#undef TOSHIBA_RBTX4927_IRQ_DEBUG
-
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-#define TOSHIBA_RBTX4927_IRQ_NONE        0x00000000
-
-#define TOSHIBA_RBTX4927_IRQ_INFO          ( 1 <<  0 )
-#define TOSHIBA_RBTX4927_IRQ_WARN          ( 1 <<  1 )
-#define TOSHIBA_RBTX4927_IRQ_EROR          ( 1 <<  2 )
-
-#define TOSHIBA_RBTX4927_IRQ_IOC_INIT      ( 1 << 10 )
-#define TOSHIBA_RBTX4927_IRQ_IOC_ENABLE    ( 1 << 13 )
-#define TOSHIBA_RBTX4927_IRQ_IOC_DISABLE   ( 1 << 14 )
-
-#define TOSHIBA_RBTX4927_SETUP_ALL         0xffffffff
-#endif
-
-
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-static const u32 toshiba_rbtx4927_irq_debug_flag =
-    (TOSHIBA_RBTX4927_IRQ_NONE | TOSHIBA_RBTX4927_IRQ_INFO |
-     TOSHIBA_RBTX4927_IRQ_WARN | TOSHIBA_RBTX4927_IRQ_EROR
-//                                                 | TOSHIBA_RBTX4927_IRQ_IOC_INIT
-//                                                 | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE
-//                                                 | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE
-    );
-#endif
-
-
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag,str...) \
-        if ( (toshiba_rbtx4927_irq_debug_flag) & (flag) ) \
-        { \
-           char tmp[100]; \
-           sprintf( tmp, str ); \
-           printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
-        }
-#else
-#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag, str...)
-#endif
-
-
-
-
-#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG   0
-#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END   7
-
-#define TOSHIBA_RBTX4927_IRQ_IOC_BEG  ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG)	/* 56 */
-#define TOSHIBA_RBTX4927_IRQ_IOC_END  ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END)	/* 63 */
-
-#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC
-#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2)
-
-extern int tx4927_using_backplane;
-
-static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq);
-static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
-
-#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
-static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
-	.name = TOSHIBA_RBTX4927_IOC_NAME,
-	.ack = toshiba_rbtx4927_irq_ioc_disable,
-	.mask = toshiba_rbtx4927_irq_ioc_disable,
-	.mask_ack = toshiba_rbtx4927_irq_ioc_disable,
-	.unmask = toshiba_rbtx4927_irq_ioc_enable,
-};
-#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL
-#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL
-
-
-u32 bit2num(u32 num)
-{
-	u32 i;
-
-	for (i = 0; i < (sizeof(num) * 8); i++) {
-		if (num & (1 << i)) {
-			return (i);
-		}
-	}
-	return (0);
-}
-
-int toshiba_rbtx4927_irq_nested(int sw_irq)
-{
-	u32 level3;
-
-	level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
-	if (level3) {
-		sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + bit2num(level3);
-		if (sw_irq != TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC) {
-			goto RETURN;
-		}
-	}
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	if (tx4927_using_backplane) {
-		int irq = i8259_irq();
-		if (irq >= 0)
-			sw_irq = irq;
-	}
-#endif
-
-      RETURN:
-	return (sw_irq);
-}
-
-static struct irqaction toshiba_rbtx4927_irq_ioc_action = {
-	.handler	= no_action,
-	.flags		= IRQF_SHARED,
-	.mask		= CPU_MASK_NONE,
-	.name		= TOSHIBA_RBTX4927_IOC_NAME
-};
-
-
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
-
-
-static void __init toshiba_rbtx4927_irq_ioc_init(void)
-{
-	int i;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_INIT,
-				     "beg=%d end=%d\n",
-				     TOSHIBA_RBTX4927_IRQ_IOC_BEG,
-				     TOSHIBA_RBTX4927_IRQ_IOC_END);
-
-	for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG;
-	     i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++)
-		set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type,
-					 handle_level_irq);
-
-	setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC,
-		  &toshiba_rbtx4927_irq_ioc_action);
-}
-
-static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
-{
-	volatile unsigned char v;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_ENABLE,
-				     "irq=%d\n", irq);
-
-	if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG
-	    || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) {
-		TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-					     "bad irq=%d\n", irq);
-		panic("\n");
-	}
-
-	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-	v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG));
-	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-}
-
-
-static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
-{
-	volatile unsigned char v;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_DISABLE,
-				     "irq=%d\n", irq);
-
-	if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG
-	    || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) {
-		TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-					     "bad irq=%d\n", irq);
-		panic("\n");
-	}
-
-	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-	v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG));
-	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-	mmiowb();
-}
-
-
-void __init arch_init_irq(void)
-{
-	extern void tx4927_irq_init(void);
-
-	tx4927_irq_init();
-	toshiba_rbtx4927_irq_ioc_init();
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	if (tx4927_using_backplane)
-		init_i8259_irqs();
-#endif
-	/* Onboard 10M Ether: High Active */
-	set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH);
-
-	wbflush();
-}
-
-void toshiba_rbtx4927_irq_dump(char *key)
-{
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-	{
-		u32 i, j = 0;
-		for (i = 0; i < NR_IRQS; i++) {
-			if (strcmp(irq_desc[i].chip->name, "none")
-			    == 0)
-				continue;
-
-			if ((i >= 1)
-			    && (irq_desc[i - 1].chip->name ==
-				irq_desc[i].chip->name)) {
-				j++;
-			} else {
-				j = 0;
-			}
-			TOSHIBA_RBTX4927_IRQ_DPRINTK
-			    (TOSHIBA_RBTX4927_IRQ_INFO,
-			     "%s irq=0x%02x/%3d s=0x%08x h=0x%08x a=0x%08x ah=0x%08x d=%1d n=%s/%02d\n",
-			     key, i, i, irq_desc[i].status,
-			     (u32) irq_desc[i].chip,
-			     (u32) irq_desc[i].action,
-			     (u32) (irq_desc[i].action ? irq_desc[i].
-				    action->handler : 0),
-			     irq_desc[i].depth,
-			     irq_desc[i].chip->name, j);
-		}
-	}
-#endif
-}
-
-void toshiba_rbtx4927_irq_dump_pics(char *s)
-{
-	u32 level0_m;
-	u32 level0_s;
-	u32 level1_m;
-	u32 level1_s;
-	u32 level2;
-	u32 level2_p;
-	u32 level2_s;
-	u32 level3_m;
-	u32 level3_s;
-	u32 level4_m;
-	u32 level4_s;
-	u32 level5_m;
-	u32 level5_s;
-
-	if (s == NULL)
-		s = "null";
-
-	level0_m = (read_c0_status() & 0x0000ff00) >> 8;
-	level0_s = (read_c0_cause() & 0x0000ff00) >> 8;
-
-	level1_m = level0_m;
-	level1_s = level0_s & 0x87;
-
-	level2 = __raw_readl((void __iomem *)0xff1ff6a0UL);
-	level2_p = (((level2 & 0x10000)) ? 0 : 1);
-	level2_s = (((level2 & 0x1f) == 0x1f) ? 0 : (level2 & 0x1f));
-
-	level3_m = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB) & 0x1f;
-	level3_s = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
-
-	level4_m = inb(0x21);
-	outb(0x0A, 0x20);
-	level4_s = inb(0x20);
-
-	level5_m = inb(0xa1);
-	outb(0x0A, 0xa0);
-	level5_s = inb(0xa0);
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "dump_raw_pic() ");
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "cp0:m=0x%02x/s=0x%02x ", level0_m,
-				     level0_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "cp0:m=0x%02x/s=0x%02x ", level1_m,
-				     level1_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "pic:e=0x%02x/s=0x%02x ", level2_p,
-				     level2_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "ioc:m=0x%02x/s=0x%02x ", level3_m,
-				     level3_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "sbm:m=0x%02x/s=0x%02x ", level4_m,
-				     level4_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "sbs:m=0x%02x/s=0x%02x ", level5_m,
-				     level5_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, "[%s]\n",
-				     s);
-}
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
deleted file mode 100644
index f3f86857beae..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * rbtx4927 specific prom routines
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-#include <asm/tx4927/tx4927.h>
-
-void __init prom_init_cmdline(void)
-{
-	int argc = (int) fw_arg0;
-	char **argv = (char **) fw_arg1;
-	int i;			/* Always ignore the "-c" at argv[0] */
-
-	/* ignore all built-in args if any f/w args given */
-	if (argc > 1) {
-		*arcs_cmdline = '\0';
-	}
-
-	for (i = 1; i < argc; i++) {
-		if (i != 1) {
-			strcat(arcs_cmdline, " ");
-		}
-		strcat(arcs_cmdline, argv[i]);
-	}
-}
-
-void __init prom_init(void)
-{
-	extern int tx4927_get_mem_size(void);
-	extern char* toshiba_name;
-	int msize;
-
-	prom_init_cmdline();
-
-	if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) {
-		mips_machtype = MACH_TOSHIBA_RBTX4927;
-		toshiba_name  = "TX4927";
-	} else {
-		mips_machtype = MACH_TOSHIBA_RBTX4937;
-		toshiba_name  = "TX4937";
-	}
-
-	msize = tx4927_get_mem_size();
-	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-const char *get_system_type(void)
-{
-	return "Toshiba RBTX4927/RBTX4937";
-}
-
-char * __init prom_getcmdline(void)
-{
-        return &(arcs_cmdline[0]);
-}
-
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
deleted file mode 100644
index 2203c77b2ce2..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- * Toshiba rbtx4927 specific setup
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: Michael Pruznick, michael_pruznick@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
-#ifdef CONFIG_TOSHIBA_FPCIB0
-#include <asm/tx4927/smsc_fdc37m81x.h>
-#endif
-#include <asm/tx4927/toshiba_rbtx4927.h>
-#ifdef CONFIG_PCI
-#include <asm/tx4927/tx4927_pci.h>
-#endif
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-
-#undef TOSHIBA_RBTX4927_SETUP_DEBUG
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-#define TOSHIBA_RBTX4927_SETUP_SETUP       ( 1 <<  4 )
-#define TOSHIBA_RBTX4927_SETUP_PCIBIOS     ( 1 <<  7 )
-#define TOSHIBA_RBTX4927_SETUP_PCI1        ( 1 <<  8 )
-#define TOSHIBA_RBTX4927_SETUP_PCI2        ( 1 <<  9 )
-
-#define TOSHIBA_RBTX4927_SETUP_ALL         0xffffffff
-#endif
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-static const u32 toshiba_rbtx4927_setup_debug_flag =
-    (TOSHIBA_RBTX4927_SETUP_SETUP |
-     | TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 |
-     TOSHIBA_RBTX4927_SETUP_PCI2);
-#endif
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag,str...) \
-        if ( (toshiba_rbtx4927_setup_debug_flag) & (flag) ) \
-        { \
-           char tmp[100]; \
-           sprintf( tmp, str ); \
-           printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
-        }
-#else
-#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag, str...)
-#endif
-
-/* These functions are used for rebooting or halting the machine*/
-extern void toshiba_rbtx4927_restart(char *command);
-extern void toshiba_rbtx4927_halt(void);
-extern void toshiba_rbtx4927_power_off(void);
-
-int tx4927_using_backplane = 0;
-
-extern void toshiba_rbtx4927_irq_setup(void);
-
-char *prom_getcmdline(void);
-
-#ifdef CONFIG_PCI
-#undef TX4927_SUPPORT_COMMAND_IO
-#undef  TX4927_SUPPORT_PCI_66
-int tx4927_cpu_clock = 100000000;	/* 100MHz */
-unsigned long mips_pci_io_base;
-unsigned long mips_pci_io_size;
-unsigned long mips_pci_mem_base;
-unsigned long mips_pci_mem_size;
-/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
-unsigned long mips_pci_io_pciaddr = 0;
-unsigned long mips_memory_upper;
-static int tx4927_ccfg_toeon = 1;
-static int tx4927_pcic_trdyto = 0;	/* default: disabled */
-unsigned long tx4927_ce_base[8];
-void tx4927_reset_pci_pcic(void);
-int tx4927_pci66 = 0;		/* 0:auto */
-#endif
-
-char *toshiba_name = "";
-
-#ifdef CONFIG_PCI
-extern struct pci_controller tx4927_controller;
-
-static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
-				    int top_bus, int busnr, int devfn)
-{
-	static struct pci_dev dev;
-	static struct pci_bus bus;
-
-	dev.sysdata = (void *)hose;
-	dev.devfn = devfn;
-	bus.number = busnr;
-	bus.ops = hose->pci_ops;
-	bus.parent = NULL;
-	dev.bus = &bus;
-
-	return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type)                                    \
-static int early_##rw##_config_##size(struct pci_controller *hose,      \
-        int top_bus, int bus, int devfn, int offset, type value)        \
-{                                                                       \
-        return pci_##rw##_config_##size(                                \
-                fake_pci_dev(hose, top_bus, bus, devfn),                \
-                offset, value);                                         \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, dword, u32)
-
-static int __init tx4927_pcibios_init(void)
-{
-	unsigned int id;
-	u32 pci_devfn;
-	int devfn_start = 0;
-	int devfn_stop = 0xff;
-	int busno = 0; /* One bus on the Toshiba */
-	struct pci_controller *hose = &tx4927_controller;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				       "-\n");
-
-	for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) {
-		early_read_config_dword(hose, busno, busno, pci_devfn,
-					PCI_VENDOR_ID, &id);
-
-		if (id == 0xffffffff) {
-			continue;
-		}
-
-		if (id == 0x94601055) {
-			u8 v08_64;
-			u32 v32_b0;
-			u8 v08_e1;
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			char *s = " sb/isa --";
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n",
-			     s);
-
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x64, &v08_64);
-			early_read_config_dword(hose, busno, busno,
-						pci_devfn, 0xb0, &v32_b0);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0xe1, &v08_e1);
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x64 = 0x%02x\n", s, v08_64);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0xb0 = 0x%02x\n", s, v32_b0);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0xe1 = 0x%02x\n", s, v08_e1);
-
-			/* serial irq control */
-			v08_64 = 0xd0;
-
-			/* serial irq pin */
-			v32_b0 |= 0x00010000;
-
-			/* ide irq on isa14 */
-			v08_e1 &= 0xf0;
-			v08_e1 |= 0x0d;
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x64 = 0x%02x\n", s, v08_64);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0xb0 = 0x%02x\n", s, v32_b0);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0xe1 = 0x%02x\n", s, v08_e1);
-
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x64, v08_64);
-			early_write_config_dword(hose, busno, busno,
-						 pci_devfn, 0xb0, v32_b0);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0xe1, v08_e1);
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			{
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x64,
-						       &v08_64);
-				early_read_config_dword(hose, busno, busno,
-							pci_devfn, 0xb0,
-							&v32_b0);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0xe1,
-						       &v08_e1);
-
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x64 = 0x%02x\n", s, v08_64);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0xb0 = 0x%02x\n", s, v32_b0);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0xe1 = 0x%02x\n", s, v08_e1);
-			}
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n",
-			     s);
-		}
-
-		if (id == 0x91301055) {
-			u8 v08_04;
-			u8 v08_09;
-			u8 v08_41;
-			u8 v08_43;
-			u8 v08_5c;
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			char *s = " sb/ide --";
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n",
-			     s);
-
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x04, &v08_04);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x09, &v08_09);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x41, &v08_41);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x43, &v08_43);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x5c, &v08_5c);
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x04 = 0x%02x\n", s, v08_04);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x09 = 0x%02x\n", s, v08_09);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x41 = 0x%02x\n", s, v08_41);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x43 = 0x%02x\n", s, v08_43);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x5c = 0x%02x\n", s, v08_5c);
-
-			/* enable ide master/io */
-			v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO);
-
-			/* enable ide native mode */
-			v08_09 |= 0x05;
-
-			/* enable primary ide */
-			v08_41 |= 0x80;
-
-			/* enable secondary ide */
-			v08_43 |= 0x80;
-
-			/*
-			 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
-			 *
-			 * This line of code is intended to provide the user with a work
-			 * around solution to the anomalies cited in SMSC's anomaly sheet
-			 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
-			 *
-			 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
-			 */
-			v08_5c |= 0x01;
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x04 = 0x%02x\n", s, v08_04);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x09 = 0x%02x\n", s, v08_09);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x41 = 0x%02x\n", s, v08_41);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x43 = 0x%02x\n", s, v08_43);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x5c = 0x%02x\n", s, v08_5c);
-
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x5c, v08_5c);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x04, v08_04);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x09, v08_09);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x41, v08_41);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x43, v08_43);
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			{
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x04,
-						       &v08_04);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x09,
-						       &v08_09);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x41,
-						       &v08_41);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x43,
-						       &v08_43);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x5c,
-						       &v08_5c);
-
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x04 = 0x%02x\n", s, v08_04);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x09 = 0x%02x\n", s, v08_09);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x41 = 0x%02x\n", s, v08_41);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x43 = 0x%02x\n", s, v08_43);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x5c = 0x%02x\n", s, v08_5c);
-			}
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n",
-			     s);
-		}
-
-	}
-
-	register_pci_controller(&tx4927_controller);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				       "+\n");
-
-	return 0;
-}
-
-arch_initcall(tx4927_pcibios_init);
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-void __init tx4927_pci_setup(void)
-{
-	static int called = 0;
-	extern unsigned int tx4927_get_mem_size(void);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "-\n");
-
-	mips_memory_upper = tx4927_get_mem_size() << 20;
-	mips_memory_upper += KSEG0;
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_memory_upper\n",
-				       mips_memory_upper);
-	mips_pci_io_base = TX4927_PCIIO;
-	mips_pci_io_size = TX4927_PCIIO_SIZE;
-	mips_pci_mem_base = TX4927_PCIMEM;
-	mips_pci_mem_size = TX4927_PCIMEM_SIZE;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_io_base\n",
-				       mips_pci_io_base);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_io_size\n",
-				       mips_pci_io_size);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_mem_base\n",
-				       mips_pci_mem_base);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_mem_size\n",
-				       mips_pci_mem_size);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_io_resource.start\n",
-				       pci_io_resource.start);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_io_resource.end\n",
-				       pci_io_resource.end);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_mem_resource.start\n",
-				       pci_mem_resource.start);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_mem_resource.end\n",
-				       pci_mem_resource.end);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_io_port_base",
-				       mips_io_port_base);
-	if (!called) {
-		printk
-		    ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
-		     toshiba_name,
-		     (unsigned short) (tx4927_pcicptr->pciid >> 16),
-		     (unsigned short) (tx4927_pcicptr->pciid & 0xffff),
-		     (unsigned short) (tx4927_pcicptr->pciccrev & 0xff),
-		     (!(tx4927_ccfgptr->
-			ccfg & TX4927_CCFG_PCIXARB)) ? "External" :
-		     "Internal");
-		called = 1;
-	}
-	printk("%s PCIC --%s PCICLK:", toshiba_name,
-	       (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : "");
-	if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) {
-		int pciclk = 0;
-		if (mips_machtype == MACH_TOSHIBA_RBTX4937)
-			switch ((unsigned long) tx4927_ccfgptr->
-				ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
-			case TX4937_CCFG_PCIDIVMODE_4:
-				pciclk = tx4927_cpu_clock / 4;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_4_5:
-				pciclk = tx4927_cpu_clock * 2 / 9;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_5:
-				pciclk = tx4927_cpu_clock / 5;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_5_5:
-				pciclk = tx4927_cpu_clock * 2 / 11;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_8:
-				pciclk = tx4927_cpu_clock / 8;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_9:
-				pciclk = tx4927_cpu_clock / 9;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_10:
-				pciclk = tx4927_cpu_clock / 10;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_11:
-				pciclk = tx4927_cpu_clock / 11;
-				break;
-			}
-
-		else
-			switch ((unsigned long) tx4927_ccfgptr->
-				ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
-			case TX4927_CCFG_PCIDIVMODE_2_5:
-				pciclk = tx4927_cpu_clock * 2 / 5;
-				break;
-			case TX4927_CCFG_PCIDIVMODE_3:
-				pciclk = tx4927_cpu_clock / 3;
-				break;
-			case TX4927_CCFG_PCIDIVMODE_5:
-				pciclk = tx4927_cpu_clock / 5;
-				break;
-			case TX4927_CCFG_PCIDIVMODE_6:
-				pciclk = tx4927_cpu_clock / 6;
-				break;
-			}
-
-		printk("Internal(%dMHz)", pciclk / 1000000);
-	} else {
-		int pciclk = 0;
-		int pciclk_setting = *tx4927_pci_clk_ptr;
-		switch (pciclk_setting & TX4927_PCI_CLK_MASK) {
-		case TX4927_PCI_CLK_33:
-			pciclk = 33333333;
-			break;
-		case TX4927_PCI_CLK_25:
-			pciclk = 25000000;
-			break;
-		case TX4927_PCI_CLK_66:
-			pciclk = 66666666;
-			break;
-		case TX4927_PCI_CLK_50:
-			pciclk = 50000000;
-			break;
-		}
-		printk("External(%dMHz)", pciclk / 1000000);
-	}
-	printk("\n");
-
-
-
-	/* GB->PCI mappings */
-	tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4;
-	tx4927_pcicptr->g2piogbase = mips_pci_io_base |
-#ifdef __BIG_ENDIAN
-	    TX4927_PCIC_G2PIOGBASE_ECHG
-#else
-	    TX4927_PCIC_G2PIOGBASE_BSDIS
-#endif
-	    ;
-
-	tx4927_pcicptr->g2piopbase = 0;
-
-	tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4;
-	tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base |
-#ifdef __BIG_ENDIAN
-	    TX4927_PCIC_G2PMnGBASE_ECHG
-#else
-	    TX4927_PCIC_G2PMnGBASE_BSDIS
-#endif
-	    ;
-	tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base;
-
-	tx4927_pcicptr->g2pmmask[1] = 0;
-	tx4927_pcicptr->g2pmgbase[1] = 0;
-	tx4927_pcicptr->g2pmpbase[1] = 0;
-	tx4927_pcicptr->g2pmmask[2] = 0;
-	tx4927_pcicptr->g2pmgbase[2] = 0;
-	tx4927_pcicptr->g2pmpbase[2] = 0;
-
-
-	/* PCI->GB mappings (I/O 256B) */
-	tx4927_pcicptr->p2giopbase = 0;	/* 256B */
-
-	/* PCI->GB mappings (MEM 512MB) M0 gets all of memory */
-	tx4927_pcicptr->p2gm0plbase = 0;
-	tx4927_pcicptr->p2gm0pubase = 0;
-	tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN |
-#ifdef __BIG_ENDIAN
-	    TX4927_PCIC_P2GMnGBASE_TECHG
-#else
-	    TX4927_PCIC_P2GMnGBASE_TBSDIS
-#endif
-	    ;
-
-	/* PCI->GB mappings (MEM 16MB) -not used */
-	tx4927_pcicptr->p2gm1plbase = 0xffffffff;
-	tx4927_pcicptr->p2gm1pubase = 0xffffffff;
-	tx4927_pcicptr->p2gmgbase[1] = 0;
-
-	/* PCI->GB mappings (MEM 1MB) -not used */
-	tx4927_pcicptr->p2gm2pbase = 0xffffffff;
-	tx4927_pcicptr->p2gmgbase[2] = 0;
-
-
-	/* Enable Initiator Memory 0 Space, I/O Space, Config */
-	tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK;
-	tx4927_pcicptr->pciccfg |=
-	    TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE |
-	    TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR;
-
-
-	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
-	tx4927_pcicptr->pcicfg1 = 0;
-
-	if (tx4927_pcic_trdyto >= 0) {
-		tx4927_pcicptr->g2ptocnt &= ~0xff;
-		tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff);
-	}
-
-	/* Clear All Local Bus Status */
-	tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL;
-	/* Enable All Local Bus Interrupts */
-	tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL;
-	/* Clear All Initiator Status */
-	tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL;
-	/* Enable All Initiator Interrupts */
-	tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL;
-	/* Clear All PCI Status Error */
-	tx4927_pcicptr->pcistatus =
-	    (tx4927_pcicptr->pcistatus & 0x0000ffff) |
-	    (TX4927_PCIC_PCISTATUS_ALL << 16);
-	/* Enable All PCI Status Error Interrupts */
-	tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL;
-
-	/* PCIC Int => IRC IRQ16 */
-	tx4927_pcicptr->pcicfg2 =
-	    (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC;
-
-	if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) {
-		/* XXX */
-	} else {
-		/* Reset Bus Arbiter */
-		tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA;
-		/* Enable Bus Arbiter */
-		tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN;
-	}
-
-	tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER |
-	    PCI_COMMAND_MEMORY |
-	    PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       ":pci setup complete:\n");
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "+\n");
-}
-
-#endif /* CONFIG_PCI */
-
-static void __noreturn wait_forever(void)
-{
-	while (1)
-		if (cpu_wait)
-			(*cpu_wait)();
-}
-
-void toshiba_rbtx4927_restart(char *command)
-{
-	printk(KERN_NOTICE "System Rebooting...\n");
-
-	/* enable the s/w reset register */
-	writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE);
-
-	/* wait for enable to be seen */
-	while ((readb(RBTX4927_SW_RESET_ENABLE) &
-		RBTX4927_SW_RESET_ENABLE_SET) == 0x00);
-
-	/* do a s/w reset */
-	writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO);
-
-	/* do something passive while waiting for reset */
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-
-void toshiba_rbtx4927_halt(void)
-{
-	printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-void toshiba_rbtx4927_power_off(void)
-{
-	toshiba_rbtx4927_halt();
-	/* no return */
-}
-
-void __init plat_mem_setup(void)
-{
-	int i;
-	u32 cp0_config;
-	char *argptr;
-
-	printk("CPU is %s\n", toshiba_name);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       "-\n");
-
-	/* f/w leaves this on at startup */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Clearing STO_ERL.\n");
-	clear_c0_status(ST0_ERL);
-
-	/* enable caches -- HCP5 does this, pmon does not */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Enabling TX49_CONF_IC,TX49_CONF_DC.\n");
-	cp0_config = read_c0_config();
-	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
-	write_c0_config(cp0_config);
-
-	set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":mips_io_port_base=0x%08lx\n",
-				       mips_io_port_base);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Resource\n");
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.end = 0xffffffff;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":ResetRoutines\n");
-	_machine_restart = toshiba_rbtx4927_restart;
-	_machine_halt = toshiba_rbtx4927_halt;
-	pm_power_off = toshiba_rbtx4927_power_off;
-
-	for (i = 0; i < TX4927_NR_TMR; i++)
-		txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL);
-
-#ifdef CONFIG_PCI
-
-	/* PCIC */
-	/*
-	   * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
-	   *
-	   * For TX4927:
-	   * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
-	   * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
-	   * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
-	   * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
-	   * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
-	   * i.e. S9[3]: ON (83MHz), OFF (100MHz)
-	   *
-	   * For TX4937:
-	   * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
-	   * PCIDIVMODE[10] is 0.
-	   * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
-	   * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
-	   * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
-	   * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
-	   * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
-	   * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
-	   *
-	 */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
-				       "ccfg is %lx, PCIDIVMODE is %x\n",
-				       (unsigned long) tx4927_ccfgptr->ccfg,
-				       (unsigned long) tx4927_ccfgptr->ccfg &
-				       (mips_machtype == MACH_TOSHIBA_RBTX4937 ?
-					TX4937_CCFG_PCIDIVMODE_MASK :
-					TX4927_CCFG_PCIDIVMODE_MASK));
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
-				       "PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n",
-				       (unsigned long) tx4927_ccfgptr->
-				       ccfg & TX4927_CCFG_PCI66,
-				       (unsigned long) tx4927_ccfgptr->
-				       ccfg & TX4927_CCFG_PCIMIDE,
-				       (unsigned long) tx4927_ccfgptr->
-				       ccfg & TX4927_CCFG_PCIXARB);
-
-	if (mips_machtype == MACH_TOSHIBA_RBTX4937)
-		switch ((unsigned long)tx4927_ccfgptr->
-			ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
-		case TX4937_CCFG_PCIDIVMODE_8:
-		case TX4937_CCFG_PCIDIVMODE_4:
-			tx4927_cpu_clock = 266666666;	/* 266MHz */
-			break;
-		case TX4937_CCFG_PCIDIVMODE_9:
-		case TX4937_CCFG_PCIDIVMODE_4_5:
-			tx4927_cpu_clock = 300000000;	/* 300MHz */
-			break;
-		default:
-			tx4927_cpu_clock = 333333333;	/* 333MHz */
-		}
-	else
-		switch ((unsigned long)tx4927_ccfgptr->
-			ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
-		case TX4927_CCFG_PCIDIVMODE_2_5:
-		case TX4927_CCFG_PCIDIVMODE_5:
-			tx4927_cpu_clock = 166666666;	/* 166MHz */
-			break;
-		default:
-			tx4927_cpu_clock = 200000000;	/* 200MHz */
-		}
-
-	/* CCFG */
-	/* do reset on watchdog */
-	tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR;
-	/* enable Timeout BusError */
-	if (tx4927_ccfg_toeon)
-		tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE;
-
-	tx4927_pci_setup();
-	if (tx4927_using_backplane == 1)
-		printk("backplane board IS installed\n");
-	else
-		printk("No Backplane \n");
-
-	/* this is on ISA bus behind PCI bus, so need PCI up first */
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	{
-		if (tx4927_using_backplane) {
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":fpcibo=yes\n");
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_init()\n");
-			smsc_fdc37m81x_init(0x3f0);
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_config_beg()\n");
-			smsc_fdc37m81x_config_beg();
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_config_set(KBD)\n");
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
-						  SMSC_FDC37M81X_KBD);
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
-						  1);
-
-			smsc_fdc37m81x_config_end();
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_config_end()\n");
-		} else {
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":fpcibo=not_found\n");
-		}
-	}
-#else
-	{
-		TOSHIBA_RBTX4927_SETUP_DPRINTK
-		    (TOSHIBA_RBTX4927_SETUP_SETUP, ":fpcibo=no\n");
-	}
-#endif
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (char *)(0xff1ff300 + i * 0x100);
-			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = TX4927_IRQ_PIC_BEG + 8 + i;
-			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = 50000000;
-			early_serial_txx9_setup(&req);
-		}
-	}
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-#endif
-
-#ifdef CONFIG_ROOT_NFS
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "root=") == NULL) {
-                strcat(argptr, " root=/dev/nfs rw");
-        }
-#endif
-
-
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
-#endif
-
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-			       "+\n");
-}
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = tx4927_cpu_clock / 2;
-	if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS)
-		txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
-				     TXX9_IRQ_BASE + 17,
-				     50000000);
-}
-
-static int __init toshiba_rbtx4927_rtc_init(void)
-{
-	static struct resource __initdata res = {
-		.start	= 0x1c010000,
-		.end	= 0x1c010000 + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(toshiba_rbtx4927_rtc_init);
-
-static int __init rbtx4927_ne_init(void)
-{
-	static struct resource __initdata res[] = {
-		{
-			.start	= RBTX4927_RTL_8019_BASE,
-			.end	= RBTX4927_RTL_8019_BASE + 0x20 - 1,
-			.flags	= IORESOURCE_IO,
-		}, {
-			.start	= RBTX4927_RTL_8019_IRQ,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(rbtx4927_ne_init);
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
-	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
-}
-device_initcall(rbtx4927_wdt_init);
-
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)50000000;
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig
deleted file mode 100644
index d90e9cd85138..000000000000
--- a/arch/mips/tx4938/Kconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-if TOSHIBA_RBTX4938
-
-comment "Multiplex Pin Select"
-choice
-	prompt "PIO[58:61]"
-	default TOSHIBA_RBTX4938_MPLEX_PIO58_61
-
-config TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	bool "PIO"
-config TOSHIBA_RBTX4938_MPLEX_NAND
-	bool "NAND"
-config TOSHIBA_RBTX4938_MPLEX_ATA
-	bool "ATA"
-
-endchoice
-
-config TX4938_NAND_BOOT
-	depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
-	bool "NAND Boot Support (EXPERIMENTAL)"
-	help
-	  This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
-	  Select this option if you need to use NAND boot.
-
-endif
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile
deleted file mode 100644
index 56aa1ed1ee0c..000000000000
--- a/arch/mips/tx4938/common/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for common code for Toshiba TX4927 based systems
-#
-
-obj-y	+= prom.o irq.o
-obj-$(CONFIG_KGDB) += dbgio.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
deleted file mode 100644
index c059b899d120..000000000000
--- a/arch/mips/tx4938/common/irq.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/irq.c
- *
- * Common tx4938 irq handler
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/tx4938/rbtx4938.h>
-
-void __init
-tx4938_irq_init(void)
-{
-	mips_cpu_irq_init();
-	txx9_irq_init(TX4938_IRC_REG);
-	set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
-}
-
-int toshiba_rbtx4938_irq_nested(int irq);
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status();
-
-	if (pending & STATUSF_IP7)
-		do_IRQ(TX4938_IRQ_CPU_TIMER);
-	else if (pending & STATUSF_IP2) {
-		int irq = txx9_irq();
-		if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0))
-			irq = toshiba_rbtx4938_irq_nested(irq);
-		if (irq >= 0)
-			do_IRQ(irq);
-		else
-			spurious_interrupt();
-	} else if (pending & STATUSF_IP1)
-		do_IRQ(TX4938_IRQ_USER1);
-	else if (pending & STATUSF_IP0)
-		do_IRQ(TX4938_IRQ_USER0);
-}
diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c
deleted file mode 100644
index 20baeaeba4cd..000000000000
--- a/arch/mips/tx4938/common/prom.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/prom.c
- *
- * common tx4938 memory interface
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-static unsigned int __init
-tx4938_process_sdccr(u64 * addr)
-{
-	u64 val;
-	unsigned int sdccr_ce;
-	unsigned int sdccr_rs;
-	unsigned int sdccr_cs;
-	unsigned int sdccr_mw;
-	unsigned int rs = 0;
-	unsigned int cs = 0;
-	unsigned int mw = 0;
-	unsigned int bc = 4;
-	unsigned int msize = 0;
-
-	val = ____raw_readq((void __iomem *)addr);
-
-	/* MVMCP -- need #defs for these bits masks */
-	sdccr_ce = ((val & (1 << 10)) >> 10);
-	sdccr_rs = ((val & (3 << 5)) >> 5);
-	sdccr_cs = ((val & (7 << 2)) >> 2);
-	sdccr_mw = ((val & (1 << 0)) >> 0);
-
-	if (sdccr_ce) {
-		switch (sdccr_rs) {
-		case 0:{
-				rs = 2048;
-				break;
-			}
-		case 1:{
-				rs = 4096;
-				break;
-			}
-		case 2:{
-				rs = 8192;
-				break;
-			}
-		default:{
-				rs = 0;
-				break;
-			}
-		}
-		switch (sdccr_cs) {
-		case 0:{
-				cs = 256;
-				break;
-			}
-		case 1:{
-				cs = 512;
-				break;
-			}
-		case 2:{
-				cs = 1024;
-				break;
-			}
-		case 3:{
-				cs = 2048;
-				break;
-			}
-		case 4:{
-				cs = 4096;
-				break;
-			}
-		default:{
-				cs = 0;
-				break;
-			}
-		}
-		switch (sdccr_mw) {
-		case 0:{
-				mw = 8;
-				break;
-			}	/* 8 bytes = 64 bits */
-		case 1:{
-				mw = 4;
-				break;
-			}	/* 4 bytes = 32 bits */
-		}
-	}
-
-	/*           bytes per chip    MB per chip          bank count */
-	msize = (((rs * cs * mw) / (1024 * 1024)) * (bc));
-
-	/* MVMCP -- bc hard coded to 4 from table 9.3.1     */
-	/*          boad supports bc=2 but no way to detect */
-
-	return (msize);
-}
-
-unsigned int __init
-tx4938_get_mem_size(void)
-{
-	unsigned int c0;
-	unsigned int c1;
-	unsigned int c2;
-	unsigned int c3;
-	unsigned int total;
-
-	/* MVMCP -- need #defs for these registers */
-	c0 = tx4938_process_sdccr((u64 *) 0xff1f8000);
-	c1 = tx4938_process_sdccr((u64 *) 0xff1f8008);
-	c2 = tx4938_process_sdccr((u64 *) 0xff1f8010);
-	c3 = tx4938_process_sdccr((u64 *) 0xff1f8018);
-	total = c0 + c1 + c2 + c3;
-
-	return (total);
-}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
deleted file mode 100644
index 1644bffa501a..000000000000
--- a/arch/mips/tx4938/toshiba_rbtx4938/prom.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c
- *
- * rbtx4938 specific prom routines
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/tx4938/tx4938.h>
-
-void __init prom_init_cmdline(void)
-{
-	int argc = (int) fw_arg0;
-	char **argv = (char **) fw_arg1;
-	int i;
-
-	/* ignore all built-in args if any f/w args given */
-	if (argc > 1) {
-		*arcs_cmdline = '\0';
-	}
-
-	for (i = 1; i < argc; i++) {
-		if (i != 1) {
-			strcat(arcs_cmdline, " ");
-		}
-		strcat(arcs_cmdline, argv[i]);
-	}
-}
-
-void __init prom_init(void)
-{
-	extern int tx4938_get_mem_size(void);
-	int msize;
-#ifndef CONFIG_TX4938_NAND_BOOT
-	prom_init_cmdline();
-#endif
-
-	msize = tx4938_get_mem_size();
-	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
-
-	return;
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
-{
-	return;
-}
-
-const char *get_system_type(void)
-{
-	return "Toshiba RBTX4938";
-}
-
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
deleted file mode 100644
index 3a3659e8633a..000000000000
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ /dev/null
@@ -1,1124 +0,0 @@
-/*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c
- *
- * Setup pointers to hardware-dependent routines.
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <asm/tx4938/rbtx4938.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <linux/spi/spi.h>
-#include <asm/tx4938/spi.h>
-#include <asm/txx9pio.h>
-
-extern char * __init prom_getcmdline(void);
-static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
-
-/* These functions are used for rebooting or halting the machine*/
-extern void rbtx4938_machine_restart(char *command);
-extern void rbtx4938_machine_halt(void);
-extern void rbtx4938_machine_power_off(void);
-
-/* clocks */
-unsigned int txx9_master_clock;
-unsigned int txx9_cpu_clock;
-unsigned int txx9_gbus_clock;
-
-unsigned long rbtx4938_ce_base[8];
-unsigned long rbtx4938_ce_size[8];
-int txboard_pci66_mode;
-static int tx4938_pcic_trdyto;	/* default: disabled */
-static int tx4938_pcic_retryto;	/* default: disabled */
-static int tx4938_ccfg_toeon = 1;
-
-struct tx4938_pcic_reg *pcicptrs[4] = {
-       tx4938_pcicptr  /* default setting for TX4938 */
-};
-
-static struct {
-	unsigned long base;
-	unsigned long size;
-} phys_regions[16] __initdata;
-static int num_phys_regions  __initdata;
-
-#define PHYS_REGION_MINSIZE	0x10000
-
-void rbtx4938_machine_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-
-	while (1)
-		__asm__(".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0");
-}
-
-void rbtx4938_machine_power_off(void)
-{
-        rbtx4938_machine_halt();
-        /* no return */
-}
-
-void rbtx4938_machine_restart(char *command)
-{
-	local_irq_disable();
-
-	printk("Rebooting...");
-	writeb(1, rbtx4938_softresetlock_addr);
-	writeb(1, rbtx4938_sfvol_addr);
-	writeb(1, rbtx4938_softreset_addr);
-	while(1)
-		;
-}
-
-void __init
-txboard_add_phys_region(unsigned long base, unsigned long size)
-{
-	if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
-		printk("phys_region overflow\n");
-		return;
-	}
-	phys_regions[num_phys_regions].base = base;
-	phys_regions[num_phys_regions].size = size;
-	num_phys_regions++;
-}
-unsigned long __init
-txboard_find_free_phys_region(unsigned long begin, unsigned long end,
-			      unsigned long size)
-{
-	unsigned long base;
-	int i;
-
-	for (base = begin / size * size; base < end; base += size) {
-		for (i = 0; i < num_phys_regions; i++) {
-			if (phys_regions[i].size &&
-			    base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
-			    base + (size - 1) >= phys_regions[i].base)
-				break;
-		}
-		if (i == num_phys_regions)
-			return base;
-	}
-	return 0;
-}
-unsigned long __init
-txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
-				     unsigned long *size)
-{
-	unsigned long sz, base;
-	for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
-		base = txboard_find_free_phys_region(begin, end, sz);
-		if (base) {
-			*size = sz;
-			return base;
-		}
-	}
-	return 0;
-}
-unsigned long __init
-txboard_request_phys_region_range(unsigned long begin, unsigned long end,
-				  unsigned long size)
-{
-	unsigned long base;
-	base = txboard_find_free_phys_region(begin, end, size);
-	if (base)
-		txboard_add_phys_region(base, size);
-	return base;
-}
-unsigned long __init
-txboard_request_phys_region(unsigned long size)
-{
-	unsigned long base;
-	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
-	base = txboard_find_free_phys_region(begin, end, size);
-	if (base)
-		txboard_add_phys_region(base, size);
-	return base;
-}
-unsigned long __init
-txboard_request_phys_region_shrink(unsigned long *size)
-{
-	unsigned long base;
-	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
-	base = txboard_find_free_phys_region_shrink(begin, end, size);
-	if (base)
-		txboard_add_phys_region(base, *size);
-	return base;
-}
-
-#ifdef CONFIG_PCI
-void __init
-tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
-		  struct pci_controller *channel,
-		  unsigned long pci_io_base,
-		  int extarb)
-{
-	int i;
-
-	/* Disable All Initiator Space */
-	pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
-			      TX4938_PCIC_PCICCFG_G2PMEN(1)|
-			      TX4938_PCIC_PCICCFG_G2PMEN(2)|
-			      TX4938_PCIC_PCICCFG_G2PIOEN);
-
-	/* GB->PCI mappings */
-	pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
-	pcicptr->g2piogbase = pci_io_base |
-#ifdef __BIG_ENDIAN
-		TX4938_PCIC_G2PIOGBASE_ECHG
-#else
-		TX4938_PCIC_G2PIOGBASE_BSDIS
-#endif
-		;
-	pcicptr->g2piopbase = 0;
-	for (i = 0; i < 3; i++) {
-		pcicptr->g2pmmask[i] = 0;
-		pcicptr->g2pmgbase[i] = 0;
-		pcicptr->g2pmpbase[i] = 0;
-	}
-	if (channel->mem_resource->end) {
-		pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
-		pcicptr->g2pmgbase[0] = channel->mem_resource->start |
-#ifdef __BIG_ENDIAN
-			TX4938_PCIC_G2PMnGBASE_ECHG
-#else
-			TX4938_PCIC_G2PMnGBASE_BSDIS
-#endif
-			;
-		pcicptr->g2pmpbase[0] = channel->mem_resource->start;
-	}
-	/* PCI->GB mappings (I/O 256B) */
-	pcicptr->p2giopbase = 0; /* 256B */
-	pcicptr->p2giogbase = 0;
-	/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
-	pcicptr->p2gm0plbase = 0;
-	pcicptr->p2gm0pubase = 0;
-	pcicptr->p2gmgbase[0] = 0 |
-		TX4938_PCIC_P2GMnGBASE_TMEMEN |
-#ifdef __BIG_ENDIAN
-		TX4938_PCIC_P2GMnGBASE_TECHG
-#else
-		TX4938_PCIC_P2GMnGBASE_TBSDIS
-#endif
-		;
-	/* PCI->GB mappings (MEM 16MB) */
-	pcicptr->p2gm1plbase = 0xffffffff;
-	pcicptr->p2gm1pubase = 0xffffffff;
-	pcicptr->p2gmgbase[1] = 0;
-	/* PCI->GB mappings (MEM 1MB) */
-	pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
-	pcicptr->p2gmgbase[2] = 0;
-
-	pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
-	/* Enable Initiator Memory Space */
-	if (channel->mem_resource->end)
-		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
-	/* Enable Initiator I/O Space */
-	if (channel->io_resource->end)
-		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
-	/* Enable Initiator Config */
-	pcicptr->pciccfg |=
-		TX4938_PCIC_PCICCFG_ICAEN |
-		TX4938_PCIC_PCICCFG_TCAR;
-
-	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
-	pcicptr->pcicfg1 = 0;
-
-	pcicptr->g2ptocnt &= ~0xffff;
-
-	if (tx4938_pcic_trdyto >= 0) {
-		pcicptr->g2ptocnt &= ~0xff;
-		pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
-	}
-
-	if (tx4938_pcic_retryto >= 0) {
-		pcicptr->g2ptocnt &= ~0xff00;
-		pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
-	}
-
-	/* Clear All Local Bus Status */
-	pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
-	/* Enable All Local Bus Interrupts */
-	pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
-	/* Clear All Initiator Status */
-	pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
-	/* Enable All Initiator Interrupts */
-	pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
-	/* Clear All PCI Status Error */
-	pcicptr->pcistatus =
-		(pcicptr->pcistatus & 0x0000ffff) |
-		(TX4938_PCIC_PCISTATUS_ALL << 16);
-	/* Enable All PCI Status Error Interrupts */
-	pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
-
-	if (!extarb) {
-		/* Reset Bus Arbiter */
-		pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
-		pcicptr->pbabm = 0;
-		/* Enable Bus Arbiter */
-		pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
-	}
-
-      /* PCIC Int => IRC IRQ16 */
-	pcicptr->pcicfg2 =
-		    (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
-
-	pcicptr->pcistatus = PCI_COMMAND_MASTER |
-		PCI_COMMAND_MEMORY |
-		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-}
-
-int __init
-tx4938_report_pciclk(void)
-{
-	unsigned long pcode = TX4938_REV_PCODE();
-	int pciclk = 0;
-	printk("TX%lx PCIC --%s PCICLK:",
-	       pcode,
-	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
-	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
-
-		switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
-		case TX4938_CCFG_PCIDIVMODE_4:
-			pciclk = txx9_cpu_clock / 4; break;
-		case TX4938_CCFG_PCIDIVMODE_4_5:
-			pciclk = txx9_cpu_clock * 2 / 9; break;
-		case TX4938_CCFG_PCIDIVMODE_5:
-			pciclk = txx9_cpu_clock / 5; break;
-		case TX4938_CCFG_PCIDIVMODE_5_5:
-			pciclk = txx9_cpu_clock * 2 / 11; break;
-		case TX4938_CCFG_PCIDIVMODE_8:
-			pciclk = txx9_cpu_clock / 8; break;
-		case TX4938_CCFG_PCIDIVMODE_9:
-			pciclk = txx9_cpu_clock / 9; break;
-		case TX4938_CCFG_PCIDIVMODE_10:
-			pciclk = txx9_cpu_clock / 10; break;
-		case TX4938_CCFG_PCIDIVMODE_11:
-			pciclk = txx9_cpu_clock / 11; break;
-		}
-		printk("Internal(%dMHz)", pciclk / 1000000);
-	} else {
-		printk("External");
-		pciclk = -1;
-	}
-	printk("\n");
-	return pciclk;
-}
-
-void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
-{
-	pcicptrs[ch] = pcicptr;
-}
-
-struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
-{
-       return pcicptrs[ch];
-}
-
-static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
-                                    int top_bus, int busnr, int devfn)
-{
-	static struct pci_dev dev;
-	static struct pci_bus bus;
-
-	dev.sysdata = bus.sysdata = hose;
-	dev.devfn = devfn;
-	bus.number = busnr;
-	bus.ops = hose->pci_ops;
-	bus.parent = NULL;
-	dev.bus = &bus;
-
-	return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type)                                    \
-static int early_##rw##_config_##size(struct pci_controller *hose,      \
-        int top_bus, int bus, int devfn, int offset, type value)        \
-{                                                                       \
-        return pci_##rw##_config_##size(                                \
-                fake_pci_dev(hose, top_bus, bus, devfn),                \
-                offset, value);                                         \
-}
-
-EARLY_PCI_OP(read, word, u16 *)
-
-int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
-{
-	u32 pci_devfn;
-	unsigned short vid;
-	int devfn_start = 0;
-	int devfn_stop = 0xff;
-	int cap66 = -1;
-	u16 stat;
-
-	printk("PCI: Checking 66MHz capabilities...\n");
-
-	for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
-		if (early_read_config_word(hose, top_bus, current_bus,
-					   pci_devfn, PCI_VENDOR_ID,
-					   &vid) != PCIBIOS_SUCCESSFUL)
-			continue;
-
-		if (vid == 0xffff) continue;
-
-		/* check 66MHz capability */
-		if (cap66 < 0)
-			cap66 = 1;
-		if (cap66) {
-			early_read_config_word(hose, top_bus, current_bus, pci_devfn,
-					       PCI_STATUS, &stat);
-			if (!(stat & PCI_STATUS_66MHZ)) {
-				printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
-				       current_bus, pci_devfn);
-				cap66 = 0;
-				break;
-			}
-		}
-	}
-	return cap66 > 0;
-}
-
-int __init
-tx4938_pciclk66_setup(void)
-{
-	int pciclk;
-
-	/* Assert M66EN */
-	tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
-	/* Double PCICLK (if possible) */
-	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
-		unsigned int pcidivmode =
-			tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
-		switch (pcidivmode) {
-		case TX4938_CCFG_PCIDIVMODE_8:
-		case TX4938_CCFG_PCIDIVMODE_4:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
-			pciclk = txx9_cpu_clock / 4;
-			break;
-		case TX4938_CCFG_PCIDIVMODE_9:
-		case TX4938_CCFG_PCIDIVMODE_4_5:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
-			pciclk = txx9_cpu_clock * 2 / 9;
-			break;
-		case TX4938_CCFG_PCIDIVMODE_10:
-		case TX4938_CCFG_PCIDIVMODE_5:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
-			pciclk = txx9_cpu_clock / 5;
-			break;
-		case TX4938_CCFG_PCIDIVMODE_11:
-		case TX4938_CCFG_PCIDIVMODE_5_5:
-		default:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
-			pciclk = txx9_cpu_clock * 2 / 11;
-			break;
-		}
-		tx4938_ccfgptr->ccfg =
-			(tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
-			| pcidivmode;
-		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
-		       (unsigned long)tx4938_ccfgptr->ccfg);
-	} else {
-		pciclk = -1;
-	}
-	return pciclk;
-}
-
-extern struct pci_controller tx4938_pci_controller[];
-static int __init tx4938_pcibios_init(void)
-{
-	unsigned long mem_base[2];
-	unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
-	unsigned long io_base[2];
-	unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
-	/* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
-	int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
-
-	PCIBIOS_MIN_IO = 0x00001000UL;
-
-	mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
-	io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
-
-	printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
-	       (unsigned short)(tx4938_pcicptr->pciid >> 16),
-	       (unsigned short)(tx4938_pcicptr->pciid & 0xffff),
-	       (unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
-	       extarb ? "External" : "Internal");
-
-	/* setup PCI area */
-	tx4938_pci_controller[0].io_resource->start = io_base[0];
-	tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
-	tx4938_pci_controller[0].mem_resource->start = mem_base[0];
-	tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
-
-	set_tx4938_pcicptr(0, tx4938_pcicptr);
-
-	register_pci_controller(&tx4938_pci_controller[0]);
-
-	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
-		printk("TX4938_CCFG_PCI66 already configured\n");
-		txboard_pci66_mode = -1; /* already configured */
-	}
-
-	/* Reset PCI Bus */
-	writeb(0, rbtx4938_pcireset_addr);
-	/* Reset PCIC */
-	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
-	if (txboard_pci66_mode > 0)
-		tx4938_pciclk66_setup();
-	mdelay(10);
-	/* clear PCIC reset */
-	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
-	writeb(1, rbtx4938_pcireset_addr);
-	mmiowb();
-	tx4938_report_pcic_status1(tx4938_pcicptr);
-
-	tx4938_report_pciclk();
-	tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
-	if (txboard_pci66_mode == 0 &&
-	    txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
-		/* Reset PCI Bus */
-		writeb(0, rbtx4938_pcireset_addr);
-		/* Reset PCIC */
-		tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
-		tx4938_pciclk66_setup();
-		mdelay(10);
-		/* clear PCIC reset */
-		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
-		writeb(1, rbtx4938_pcireset_addr);
-		mmiowb();
-		/* Reinitialize PCIC */
-		tx4938_report_pciclk();
-		tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
-	}
-
-	mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
-	io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
-	/* Reset PCIC1 */
-	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
-	/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
-	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
-		tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
-	else
-		tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
-	mdelay(10);
-	/* clear PCIC1 reset */
-	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
-	tx4938_report_pcic_status1(tx4938_pcic1ptr);
-
-	printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
-	       (unsigned short)(tx4938_pcic1ptr->pciid >> 16),
-	       (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
-	       (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
-	printk("%s PCICLK:%dMHz\n",
-	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
-	       txx9_gbus_clock /
-	       ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
-	       1000000);
-
-	/* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
-	tx4938_pci_controller[1].io_resource->start =
-		io_base[1] - io_base[0];
-	tx4938_pci_controller[1].io_resource->end =
-		io_base[1] - io_base[0] + io_size[1] - 1;
-	tx4938_pci_controller[1].mem_resource->start = mem_base[1];
-	tx4938_pci_controller[1].mem_resource->end =
-		mem_base[1] + mem_size[1] - 1;
-	set_tx4938_pcicptr(1, tx4938_pcic1ptr);
-
-	register_pci_controller(&tx4938_pci_controller[1]);
-
-	tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
-
-	/* map ioport 0 to PCI I/O space address 0 */
-	set_io_port_base(KSEG1 + io_base[0]);
-
-	return 0;
-}
-
-arch_initcall(tx4938_pcibios_init);
-
-#endif /* CONFIG_PCI */
-
-/* SPI support */
-
-/* chip select for SPI devices */
-#define	SEEPROM1_CS	7	/* PIO7 */
-#define	SEEPROM2_CS	0	/* IOC */
-#define	SEEPROM3_CS	1	/* IOC */
-#define	SRTC_CS	2	/* IOC */
-
-#ifdef CONFIG_PCI
-static int __init rbtx4938_ethaddr_init(void)
-{
-	unsigned char dat[17];
-	unsigned char sum;
-	int i;
-
-	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
-	if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
-		printk(KERN_ERR "seeprom: read error.\n");
-		return -ENODEV;
-	} else {
-		if (strcmp(dat, "MAC") != 0)
-			printk(KERN_WARNING "seeprom: bad signature.\n");
-		for (i = 0, sum = 0; i < sizeof(dat); i++)
-			sum += dat[i];
-		if (sum)
-			printk(KERN_WARNING "seeprom: bad checksum.\n");
-	}
-	for (i = 0; i < 2; i++) {
-		unsigned int id =
-			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
-		struct platform_device *pdev;
-		if (!(tx4938_ccfgptr->pcfg &
-		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
-			continue;
-		pdev = platform_device_alloc("tc35815-mac", id);
-		if (!pdev ||
-		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
-		    platform_device_add(pdev))
-			platform_device_put(pdev);
-	}
-	return 0;
-}
-device_initcall(rbtx4938_ethaddr_init);
-#endif /* CONFIG_PCI */
-
-static void __init rbtx4938_spi_setup(void)
-{
-	/* set SPI_SEL */
-	tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
-}
-
-static struct resource rbtx4938_fpga_resource;
-
-static char pcode_str[8];
-static struct resource tx4938_reg_resource = {
-	.start	= TX4938_REG_BASE,
-	.end	= TX4938_REG_BASE + TX4938_REG_SIZE,
-	.name	= pcode_str,
-	.flags	= IORESOURCE_MEM
-};
-
-void __init tx4938_board_setup(void)
-{
-	int i;
-	unsigned long divmode;
-	int cpuclk = 0;
-	unsigned long pcode = TX4938_REV_PCODE();
-
-	ioport_resource.start = 0x1000;
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.start = 0x1000;
-	iomem_resource.end = 0xffffffff;	/* expand to 4GB */
-
-	sprintf(pcode_str, "TX%lx", pcode);
-	/* SDRAMC,EBUSC are configured by PROM */
-	for (i = 0; i < 8; i++) {
-		if (!(tx4938_ebuscptr->cr[i] & 0x8))
-			continue;	/* disabled */
-		rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
-		txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
-	}
-
-	/* clocks */
-	if (txx9_master_clock) {
-		/* calculate gbus_clock and cpu_clock_freq from master_clock */
-		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_8:
-		case TX4938_CCFG_DIVMODE_10:
-		case TX4938_CCFG_DIVMODE_12:
-		case TX4938_CCFG_DIVMODE_16:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_gbus_clock = txx9_master_clock * 4; break;
-		default:
-			txx9_gbus_clock = txx9_master_clock;
-		}
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_2:
-		case TX4938_CCFG_DIVMODE_8:
-			cpuclk = txx9_gbus_clock * 2; break;
-		case TX4938_CCFG_DIVMODE_2_5:
-		case TX4938_CCFG_DIVMODE_10:
-			cpuclk = txx9_gbus_clock * 5 / 2; break;
-		case TX4938_CCFG_DIVMODE_3:
-		case TX4938_CCFG_DIVMODE_12:
-			cpuclk = txx9_gbus_clock * 3; break;
-		case TX4938_CCFG_DIVMODE_4:
-		case TX4938_CCFG_DIVMODE_16:
-			cpuclk = txx9_gbus_clock * 4; break;
-		case TX4938_CCFG_DIVMODE_4_5:
-		case TX4938_CCFG_DIVMODE_18:
-			cpuclk = txx9_gbus_clock * 9 / 2; break;
-		}
-		txx9_cpu_clock = cpuclk;
-	} else {
-		if (txx9_cpu_clock == 0) {
-			txx9_cpu_clock = 300000000;	/* 300MHz */
-		}
-		/* calculate gbus_clock and master_clock from cpu_clock_freq */
-		cpuclk = txx9_cpu_clock;
-		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_2:
-		case TX4938_CCFG_DIVMODE_8:
-			txx9_gbus_clock = cpuclk / 2; break;
-		case TX4938_CCFG_DIVMODE_2_5:
-		case TX4938_CCFG_DIVMODE_10:
-			txx9_gbus_clock = cpuclk * 2 / 5; break;
-		case TX4938_CCFG_DIVMODE_3:
-		case TX4938_CCFG_DIVMODE_12:
-			txx9_gbus_clock = cpuclk / 3; break;
-		case TX4938_CCFG_DIVMODE_4:
-		case TX4938_CCFG_DIVMODE_16:
-			txx9_gbus_clock = cpuclk / 4; break;
-		case TX4938_CCFG_DIVMODE_4_5:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_gbus_clock = cpuclk * 2 / 9; break;
-		}
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_8:
-		case TX4938_CCFG_DIVMODE_10:
-		case TX4938_CCFG_DIVMODE_12:
-		case TX4938_CCFG_DIVMODE_16:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_master_clock = txx9_gbus_clock / 4; break;
-		default:
-			txx9_master_clock = txx9_gbus_clock;
-		}
-	}
-	/* change default value to udelay/mdelay take reasonable time */
-	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
-
-	/* CCFG */
-	/* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
-	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
-	/* do reset on watchdog */
-	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR;
-	/* clear PCIC1 reset */
-	if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
-		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
-
-	/* enable Timeout BusError */
-	if (tx4938_ccfg_toeon)
-		tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
-
-	/* DMA selection */
-	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
-
-	/* Use external clock for external arbiter */
-	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
-		tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
-
-	printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
-	       pcode_str,
-	       cpuclk / 1000000, txx9_master_clock / 1000000,
-	       (unsigned long)tx4938_ccfgptr->crir,
-	       tx4938_ccfgptr->ccfg,
-	       tx4938_ccfgptr->pcfg);
-
-	printk("%s SDRAMC --", pcode_str);
-	for (i = 0; i < 4; i++) {
-		unsigned long long cr = tx4938_sdramcptr->cr[i];
-		unsigned long ram_base, ram_size;
-		if (!((unsigned long)cr & 0x00000400))
-			continue;	/* disabled */
-		ram_base = (unsigned long)(cr >> 49) << 21;
-		ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
-		if (ram_base >= 0x20000000)
-			continue;	/* high memory (ignore) */
-		printk(" CR%d:%016Lx", i, cr);
-		txboard_add_phys_region(ram_base, ram_size);
-	}
-	printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
-
-	/* SRAM */
-	if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
-		unsigned int size = 0x800;
-		unsigned long base =
-			(tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
-		 txboard_add_phys_region(base, size);
-	}
-
-	/* TMR */
-	for (i = 0; i < TX4938_NR_TMR; i++)
-		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
-
-	/* enable DMA */
-	for (i = 0; i < 2; i++)
-		____raw_writeq(TX4938_DMA_MCR_MSTEN,
-			       (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
-
-	/* PIO */
-	__raw_writel(0, &tx4938_pioptr->maskcpu);
-	__raw_writel(0, &tx4938_pioptr->maskext);
-
-	/* TX4938 internal registers */
-	if (request_resource(&iomem_resource, &tx4938_reg_resource))
-		printk("request resource for internal registers failed\n");
-}
-
-#ifdef CONFIG_PCI
-static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
-{
-	unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
-	unsigned long g2pstatus = pcicptr->g2pstatus;
-	unsigned long pcicstatus = pcicptr->pcicstatus;
-	static struct {
-		unsigned long flag;
-		const char *str;
-	} pcistat_tbl[] = {
-		{ PCI_STATUS_DETECTED_PARITY,	"DetectedParityError" },
-		{ PCI_STATUS_SIG_SYSTEM_ERROR,	"SignaledSystemError" },
-		{ PCI_STATUS_REC_MASTER_ABORT,	"ReceivedMasterAbort" },
-		{ PCI_STATUS_REC_TARGET_ABORT,	"ReceivedTargetAbort" },
-		{ PCI_STATUS_SIG_TARGET_ABORT,	"SignaledTargetAbort" },
-		{ PCI_STATUS_PARITY,	"MasterParityError" },
-	}, g2pstat_tbl[] = {
-		{ TX4938_PCIC_G2PSTATUS_TTOE,	"TIOE" },
-		{ TX4938_PCIC_G2PSTATUS_RTOE,	"RTOE" },
-	}, pcicstat_tbl[] = {
-		{ TX4938_PCIC_PCICSTATUS_PME,	"PME" },
-		{ TX4938_PCIC_PCICSTATUS_TLB,	"TLB" },
-		{ TX4938_PCIC_PCICSTATUS_NIB,	"NIB" },
-		{ TX4938_PCIC_PCICSTATUS_ZIB,	"ZIB" },
-		{ TX4938_PCIC_PCICSTATUS_PERR,	"PERR" },
-		{ TX4938_PCIC_PCICSTATUS_SERR,	"SERR" },
-		{ TX4938_PCIC_PCICSTATUS_GBE,	"GBE" },
-		{ TX4938_PCIC_PCICSTATUS_IWB,	"IWB" },
-	};
-	int i;
-
-	printk("pcistat:%04x(", pcistatus);
-	for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
-		if (pcistatus & pcistat_tbl[i].flag)
-			printk("%s ", pcistat_tbl[i].str);
-	printk("), g2pstatus:%08lx(", g2pstatus);
-	for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
-		if (g2pstatus & g2pstat_tbl[i].flag)
-			printk("%s ", g2pstat_tbl[i].str);
-	printk("), pcicstatus:%08lx(", pcicstatus);
-	for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
-		if (pcicstatus & pcicstat_tbl[i].flag)
-			printk("%s ", pcicstat_tbl[i].str);
-	printk(")\n");
-}
-
-void tx4938_report_pcic_status(void)
-{
-	int i;
-	struct tx4938_pcic_reg *pcicptr;
-	for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
-		tx4938_report_pcic_status1(pcicptr);
-}
-
-#endif /* CONFIG_PCI */
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = txx9_cpu_clock / 2;
-	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS)
-		txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL,
-				     TXX9_IRQ_BASE + TX4938_IR_TMR(0),
-				     txx9_gbus_clock / 2);
-}
-
-void __init plat_mem_setup(void)
-{
-	unsigned long long pcfg;
-	char *argptr;
-
-	iomem_resource.end = 0xffffffff;	/* 4GB */
-
-	if (txx9_master_clock == 0)
-		txx9_master_clock = 25000000; /* 25MHz */
-	tx4938_board_setup();
-#ifndef CONFIG_PCI
-	set_io_port_base(RBTX4938_ETHER_BASE);
-#endif
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (char *)(0xff1ff300 + i * 0x100);
-			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = RBTX4938_IRQ_IRC_SIO(i);
-			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = 50000000;
-			early_serial_txx9_setup(&req);
-		}
-	}
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-#endif
-
-#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk("PIOSEL: disabling both ata and nand selection\n");
-	local_irq_disable();
-	tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
-#endif
-
-#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk("PIOSEL: enabling nand selection\n");
-	tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
-	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
-#endif
-
-#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk("PIOSEL: enabling ata selection\n");
-	tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
-	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
-#endif
-
-#ifdef CONFIG_IP_PNP
-	argptr = prom_getcmdline();
-	if (strstr(argptr, "ip=") == NULL) {
-		strcat(argptr, " ip=any");
-	}
-#endif
-
-
-#ifdef CONFIG_FB
-	{
-		conswitchp = &dummy_con;
-	}
-#endif
-
-	rbtx4938_spi_setup();
-	pcfg = tx4938_ccfgptr->pcfg;	/* updated */
-	/* fixup piosel */
-	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
-	    TX4938_PCFG_ATA_SEL)
-		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04,
-		       rbtx4938_piosel_addr);
-	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
-		 TX4938_PCFG_NDF_SEL)
-		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08,
-		       rbtx4938_piosel_addr);
-	else
-		writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04),
-		       rbtx4938_piosel_addr);
-
-	rbtx4938_fpga_resource.name = "FPGA Registers";
-	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
-	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
-	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-	if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
-		printk("request resource for fpga failed\n");
-
-	_machine_restart = rbtx4938_machine_restart;
-	_machine_halt = rbtx4938_machine_halt;
-	pm_power_off = rbtx4938_machine_power_off;
-
-	writeb(0xff, rbtx4938_led_addr);
-	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
-	       readb(rbtx4938_fpga_rev_addr),
-	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
-}
-
-static int __init rbtx4938_ne_init(void)
-{
-	struct resource res[] = {
-		{
-			.start	= RBTX4938_RTL_8019_BASE,
-			.end	= RBTX4938_RTL_8019_BASE + 0x20 - 1,
-			.flags	= IORESOURCE_IO,
-		}, {
-			.start	= RBTX4938_RTL_8019_IRQ,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(rbtx4938_ne_init);
-
-/* GPIO support */
-
-int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
-
-static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
-				  int value)
-{
-	u8 val;
-	unsigned long flags;
-	spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
-	val = readb(rbtx4938_spics_addr);
-	if (value)
-		val |= 1 << offset;
-	else
-		val &= ~(1 << offset);
-	writeb(val, rbtx4938_spics_addr);
-	mmiowb();
-	spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
-}
-
-static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
-				     unsigned int offset, int value)
-{
-	rbtx4938_spi_gpio_set(chip, offset, value);
-	return 0;
-}
-
-static struct gpio_chip rbtx4938_spi_gpio_chip = {
-	.set = rbtx4938_spi_gpio_set,
-	.direction_output = rbtx4938_spi_gpio_dir_out,
-	.label = "RBTX4938-SPICS",
-	.base = 16,
-	.ngpio = 3,
-};
-
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
-	struct resource res[] = {
-		{
-			.start	= base,
-			.end	= base + 0x20 - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= irq,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-	platform_device_register_simple("spi_txx9", 0,
-					res, ARRAY_SIZE(res));
-}
-
-static int __init rbtx4938_spi_init(void)
-{
-	struct spi_board_info srtc_info = {
-		.modalias = "rtc-rs5c348",
-		.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
-		.bus_num = 0,
-		.chip_select = 16 + SRTC_CS,
-		/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS  */
-		.mode = SPI_MODE_1 | SPI_CS_HIGH,
-	};
-	spi_register_board_info(&srtc_info, 1);
-	spi_eeprom_register(SEEPROM1_CS);
-	spi_eeprom_register(16 + SEEPROM2_CS);
-	spi_eeprom_register(16 + SEEPROM3_CS);
-	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
-	gpio_direction_output(16 + SRTC_CS, 0);
-	gpio_request(SEEPROM1_CS, "seeprom1");
-	gpio_direction_output(SEEPROM1_CS, 1);
-	gpio_request(16 + SEEPROM2_CS, "seeprom2");
-	gpio_direction_output(16 + SEEPROM2_CS, 1);
-	gpio_request(16 + SEEPROM3_CS, "seeprom3");
-	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
-	return 0;
-}
-
-static int __init rbtx4938_arch_init(void)
-{
-	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16);
-	gpiochip_add(&rbtx4938_spi_gpio_chip);
-	return rbtx4938_spi_init();
-}
-arch_initcall(rbtx4938_arch_init);
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
-	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-device_initcall(rbtx4938_wdt_init);
-
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (!strcmp(id, "spi-baseclk"))
-		return (struct clk *)(txx9_gbus_clock / 2 / 4);
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)(txx9_gbus_clock / 2);
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
new file mode 100644
index 000000000000..6de4c5aa92be
--- /dev/null
+++ b/arch/mips/txx9/Kconfig
@@ -0,0 +1,117 @@
+config TOSHIBA_JMR3927
+	bool "Toshiba JMR-TX3927 board"
+	depends on MACH_TX39XX
+	select SOC_TX3927
+
+config TOSHIBA_RBTX4927
+	bool "Toshiba RBTX49[23]7 board"
+	depends on MACH_TX49XX
+	select SOC_TX4927
+	# TX4937 is subset of TX4938
+	select SOC_TX4938
+	help
+	  This Toshiba board is based on the TX4927 processor. Say Y here to
+	  support this machine type
+
+config TOSHIBA_RBTX4938
+	bool "Toshiba RBTX4938 board"
+	depends on MACH_TX49XX
+	select SOC_TX4938
+	help
+	  This Toshiba board is based on the TX4938 processor. Say Y here to
+	  support this machine type
+
+config SOC_TX3927
+	bool
+	select CEVT_TXX9
+	select DMA_NONCOHERENT
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select IRQ_TXX9
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX39XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
+
+config SOC_TX4927
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select CEVT_TXX9
+	select DMA_NONCOHERENT
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_TXX9
+	select PCI_TX4927
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
+
+config SOC_TX4938
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select CEVT_TXX9
+	select DMA_NONCOHERENT
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_TXX9
+	select PCI_TX4927
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
+
+config TOSHIBA_FPCIB0
+	bool "FPCIB0 Backplane Support"
+	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	select I8259
+
+config PICMG_PCI_BACKPLANE_DEFAULT
+	bool "Support for PICMG PCI Backplane"
+	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	default y if !TOSHIBA_FPCIB0
+
+if TOSHIBA_RBTX4938
+
+comment "Multiplex Pin Select"
+choice
+	prompt "PIO[58:61]"
+	default TOSHIBA_RBTX4938_MPLEX_PIO58_61
+
+config TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	bool "PIO"
+config TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND"
+config TOSHIBA_RBTX4938_MPLEX_ATA
+	bool "ATA"
+
+endchoice
+
+config TX4938_NAND_BOOT
+	depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND Boot Support (EXPERIMENTAL)"
+	help
+	  This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
+	  Select this option if you need to use NAND boot.
+
+endif
+
+config PCI_TX4927
+	bool
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
new file mode 100644
index 000000000000..9c120771e65f
--- /dev/null
+++ b/arch/mips/txx9/generic/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for common code for TXx9 based systems
+#
+
+obj-y	+= setup.o
+obj-$(CONFIG_PCI)	+= pci.o
+obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o setup_tx4927.o irq_tx4927.o
+obj-$(CONFIG_SOC_TX4938)	+= mem_tx4927.o setup_tx4938.o irq_tx4938.o
+obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
+obj-$(CONFIG_KGDB)	+= dbgio.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/txx9/generic/dbgio.c
index 33b9c672a322..33b9c672a322 100644
--- a/arch/mips/tx4938/common/dbgio.c
+++ b/arch/mips/txx9/generic/dbgio.c
diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/txx9/generic/irq_tx4927.c
index 0aabd57fdad2..cbea1fdde82b 100644
--- a/arch/mips/tx4927/common/tx4927_irq.c
+++ b/arch/mips/txx9/generic/irq_tx4927.c
@@ -26,40 +26,12 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/tx4927/tx4927.h>
-#ifdef CONFIG_TOSHIBA_RBTX4927
-#include <asm/tx4927/toshiba_rbtx4927.h>
-#endif
+#include <asm/txx9/tx4927.h>
 
 void __init tx4927_irq_init(void)
 {
 	mips_cpu_irq_init();
-	txx9_irq_init(TX4927_IRC_REG);
-	set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (pending & STATUSF_IP7)			/* cpu timer */
-		do_IRQ(TX4927_IRQ_CPU_TIMER);
-	else if (pending & STATUSF_IP2) {		/* tx4927 pic */
-		int irq = txx9_irq();
-#ifdef CONFIG_TOSHIBA_RBTX4927
-		if (irq == TX4927_IRQ_NEST_EXT_ON_PIC)
-			irq = toshiba_rbtx4927_irq_nested(irq);
-#endif
-		if (unlikely(irq < 0)) {
-			spurious_interrupt();
-			return;
-		}
-		do_IRQ(irq);
-	} else if (pending & STATUSF_IP0)		/* user line 0 */
-		do_IRQ(TX4927_IRQ_USER0);
-	else if (pending & STATUSF_IP1)			/* user line 1 */
-		do_IRQ(TX4927_IRQ_USER1);
-	else
-		spurious_interrupt();
+	txx9_irq_init(TX4927_IRC_REG & 0xfffffffffULL);
+	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT,
+				handle_simple_irq);
 }
diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c
new file mode 100644
index 000000000000..6eac684bf190
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx4938.c
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/mips/tx4938/common/irq.c
+ *
+ * Common tx4938 irq handler
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/irq_cpu.h>
+#include <asm/txx9/tx4938.h>
+
+void __init tx4938_irq_init(void)
+{
+	mips_cpu_irq_init();
+	txx9_irq_init(TX4938_IRC_REG & 0xfffffffffULL);
+	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT,
+				handle_simple_irq);
+}
diff --git a/arch/mips/tx4927/common/tx4927_prom.c b/arch/mips/txx9/generic/mem_tx4927.c
index 6eed53d8f386..ef6ea6e97873 100644
--- a/arch/mips/tx4927/common/tx4927_prom.c
+++ b/arch/mips/txx9/generic/mem_tx4927.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/mips/tx4927/common/tx4927_prom.c
+ * linux/arch/mips/txx9/generic/mem_tx4927.c
  *
  * common tx4927 memory interface
  *
@@ -30,15 +30,11 @@
  */
 
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <asm/txx9/tx4927.h>
 
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/tx4927/tx4927.h>
-
-static unsigned int __init tx4927_process_sdccr(unsigned long addr)
+static unsigned int __init tx4927_process_sdccr(u64 __iomem *addr)
 {
 	u64 val;
 	unsigned int sdccr_ce;
@@ -50,97 +46,32 @@ static unsigned int __init tx4927_process_sdccr(unsigned long addr)
 	unsigned int rs = 0;
 	unsigned int cs = 0;
 	unsigned int mw = 0;
-	unsigned int msize = 0;
 
-	val = __raw_readq((void __iomem *)addr);
+	val = __raw_readq(addr);
 
 	/* MVMCP -- need #defs for these bits masks */
 	sdccr_ce = ((val & (1 << 10)) >> 10);
 	sdccr_bs = ((val & (1 << 8)) >> 8);
 	sdccr_rs = ((val & (3 << 5)) >> 5);
-	sdccr_cs = ((val & (3 << 2)) >> 2);
+	sdccr_cs = ((val & (7 << 2)) >> 2);
 	sdccr_mw = ((val & (1 << 0)) >> 0);
 
 	if (sdccr_ce) {
-		switch (sdccr_bs) {
-		case 0:{
-				bs = 2;
-				break;
-			}
-		case 1:{
-				bs = 4;
-				break;
-			}
-		}
-		switch (sdccr_rs) {
-		case 0:{
-				rs = 2048;
-				break;
-			}
-		case 1:{
-				rs = 4096;
-				break;
-			}
-		case 2:{
-				rs = 8192;
-				break;
-			}
-		case 3:{
-				rs = 0;
-				break;
-			}
-		}
-		switch (sdccr_cs) {
-		case 0:{
-				cs = 256;
-				break;
-			}
-		case 1:{
-				cs = 512;
-				break;
-			}
-		case 2:{
-				cs = 1024;
-				break;
-			}
-		case 3:{
-				cs = 2048;
-				break;
-			}
-		}
-		switch (sdccr_mw) {
-		case 0:{
-				mw = 8;
-				break;
-			}	/* 8 bytes = 64 bits */
-		case 1:{
-				mw = 4;
-				break;
-			}	/* 4 bytes = 32 bits */
-		}
+		bs = 2 << sdccr_bs;
+		rs = 2048 << sdccr_rs;
+		cs = 256 << sdccr_cs;
+		mw = 8 >> sdccr_mw;
 	}
 
-	/*            bytes per chip     MB per chip      num chips */
-	msize = (((rs * cs * mw) / (1024 * 1024)) * bs);
-
-	return (msize);
+	return rs * cs * mw * bs;
 }
 
-
 unsigned int __init tx4927_get_mem_size(void)
 {
-	unsigned int c0;
-	unsigned int c1;
-	unsigned int c2;
-	unsigned int c3;
-	unsigned int total;
-
-	/* MVMCP -- need #defs for these registers */
-	c0 = tx4927_process_sdccr(0xff1f8000);
-	c1 = tx4927_process_sdccr(0xff1f8008);
-	c2 = tx4927_process_sdccr(0xff1f8010);
-	c3 = tx4927_process_sdccr(0xff1f8018);
-	total = c0 + c1 + c2 + c3;
+	unsigned int total = 0;
+	int i;
 
-	return (total);
+	for (i = 0; i < ARRAY_SIZE(tx4927_sdramcptr->cr); i++)
+		total += tx4927_process_sdccr(&tx4927_sdramcptr->cr[i]);
+	return total;
 }
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
new file mode 100644
index 000000000000..0b92d8c13208
--- /dev/null
+++ b/arch/mips/txx9/generic/pci.c
@@ -0,0 +1,388 @@
+/*
+ * linux/arch/mips/txx9/pci.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4927/setup.c,
+ *          linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001-2005 MontaVista Software Inc.
+ * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#include <linux/interrupt.h>
+#include <asm/i8259.h>
+#include <asm/txx9/smsc_fdc37m81x.h>
+#endif
+
+static int __init
+early_read_config_word(struct pci_controller *hose,
+		       int top_bus, int bus, int devfn, int offset, u16 *value)
+{
+	struct pci_dev fake_dev;
+	struct pci_bus fake_bus;
+
+	fake_dev.bus = &fake_bus;
+	fake_dev.sysdata = hose;
+	fake_dev.devfn = devfn;
+	fake_bus.number = bus;
+	fake_bus.sysdata = hose;
+	fake_bus.ops = hose->pci_ops;
+
+	if (bus != top_bus)
+		/* Fake a parent bus structure. */
+		fake_bus.parent = &fake_bus;
+	else
+		fake_bus.parent = NULL;
+
+	return pci_read_config_word(&fake_dev, offset, value);
+}
+
+int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
+			    int current_bus)
+{
+	u32 pci_devfn;
+	unsigned short vid;
+	int cap66 = -1;
+	u16 stat;
+
+	/* It seems SLC90E66 needs some time after PCI reset... */
+	mdelay(80);
+
+	printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		if (PCI_FUNC(pci_devfn))
+			continue;
+		if (early_read_config_word(hose, top_bus, current_bus,
+					   pci_devfn, PCI_VENDOR_ID, &vid) !=
+		    PCIBIOS_SUCCESSFUL)
+			continue;
+		if (vid == 0xffff)
+			continue;
+
+		/* check 66MHz capability */
+		if (cap66 < 0)
+			cap66 = 1;
+		if (cap66) {
+			early_read_config_word(hose, top_bus, current_bus,
+					       pci_devfn, PCI_STATUS, &stat);
+			if (!(stat & PCI_STATUS_66MHZ)) {
+				printk(KERN_DEBUG
+				       "PCI: %02x:%02x not 66MHz capable.\n",
+				       current_bus, pci_devfn);
+				cap66 = 0;
+				break;
+			}
+		}
+	}
+	return cap66 > 0;
+}
+
+static struct resource primary_pci_mem_res[2] = {
+	{ .name = "PCI MEM" },
+	{ .name = "PCI MMIO" },
+};
+static struct resource primary_pci_io_res = { .name = "PCI IO" };
+struct pci_controller txx9_primary_pcic = {
+	.mem_resource = &primary_pci_mem_res[0],
+	.io_resource = &primary_pci_io_res,
+};
+
+#ifdef CONFIG_64BIT
+int txx9_pci_mem_high __initdata = 1;
+#else
+int txx9_pci_mem_high __initdata;
+#endif
+
+/*
+ * allocate pci_controller and resources.
+ * mem_base, io_base: physical addresss.  0 for auto assignment.
+ * mem_size and io_size means max size on auto assignment.
+ * pcic must be &txx9_primary_pcic or NULL.
+ */
+struct pci_controller *__init
+txx9_alloc_pci_controller(struct pci_controller *pcic,
+			  unsigned long mem_base, unsigned long mem_size,
+			  unsigned long io_base, unsigned long io_size)
+{
+	struct pcic {
+		struct pci_controller c;
+		struct resource r_mem[2];
+		struct resource r_io;
+	} *new = NULL;
+	int min_size = 0x10000;
+
+	if (!pcic) {
+		new = kzalloc(sizeof(*new), GFP_KERNEL);
+		if (!new)
+			return NULL;
+		new->r_mem[0].name = "PCI mem";
+		new->r_mem[1].name = "PCI mmio";
+		new->r_io.name = "PCI io";
+		new->c.mem_resource = new->r_mem;
+		new->c.io_resource = &new->r_io;
+		pcic = &new->c;
+	} else
+		BUG_ON(pcic != &txx9_primary_pcic);
+	pcic->io_resource->flags = IORESOURCE_IO;
+
+	/*
+	 * for auto assignment, first search a (big) region for PCI
+	 * MEM, then search a region for PCI IO.
+	 */
+	if (mem_base) {
+		pcic->mem_resource[0].start = mem_base;
+		pcic->mem_resource[0].end = mem_base + mem_size - 1;
+		if (request_resource(&iomem_resource, &pcic->mem_resource[0]))
+			goto free_and_exit;
+	} else {
+		unsigned long min = 0, max = 0x20000000; /* low 512MB */
+		if (!mem_size) {
+			/* default size for auto assignment */
+			if (txx9_pci_mem_high)
+				mem_size = 0x20000000;	/* mem:512M(max) */
+			else
+				mem_size = 0x08000000;	/* mem:128M(max) */
+		}
+		if (txx9_pci_mem_high) {
+			min = 0x20000000;
+			max = 0xe0000000;
+		}
+		/* search free region for PCI MEM */
+		for (; mem_size >= min_size; mem_size /= 2) {
+			if (allocate_resource(&iomem_resource,
+					      &pcic->mem_resource[0],
+					      mem_size, min, max,
+					      mem_size, NULL, NULL) == 0)
+				break;
+		}
+		if (mem_size < min_size)
+			goto free_and_exit;
+	}
+
+	pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (io_base) {
+		pcic->mem_resource[1].start = io_base;
+		pcic->mem_resource[1].end = io_base + io_size - 1;
+		if (request_resource(&iomem_resource, &pcic->mem_resource[1]))
+			goto release_and_exit;
+	} else {
+		if (!io_size)
+			/* default size for auto assignment */
+			io_size = 0x01000000;	/* io:16M(max) */
+		/* search free region for PCI IO in low 512MB */
+		for (; io_size >= min_size; io_size /= 2) {
+			if (allocate_resource(&iomem_resource,
+					      &pcic->mem_resource[1],
+					      io_size, 0, 0x20000000,
+					      io_size, NULL, NULL) == 0)
+				break;
+		}
+		if (io_size < min_size)
+			goto release_and_exit;
+		io_base = pcic->mem_resource[1].start;
+	}
+
+	pcic->mem_resource[0].flags = IORESOURCE_MEM;
+	if (pcic == &txx9_primary_pcic &&
+	    mips_io_port_base == (unsigned long)-1) {
+		/* map ioport 0 to PCI I/O space address 0 */
+		set_io_port_base(IO_BASE + pcic->mem_resource[1].start);
+		pcic->io_resource->start = 0;
+		pcic->io_offset = 0;	/* busaddr == ioaddr */
+		pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start;
+	} else {
+		/* physaddr to ioaddr */
+		pcic->io_resource->start =
+			io_base - (mips_io_port_base - IO_BASE);
+		pcic->io_offset = io_base - (mips_io_port_base - IO_BASE);
+		pcic->io_map_base = mips_io_port_base;
+	}
+	pcic->io_resource->end = pcic->io_resource->start + io_size - 1;
+
+	pcic->mem_offset = 0;	/* busaddr == physaddr */
+
+	printk(KERN_INFO "PCI: IO 0x%08llx-0x%08llx MEM 0x%08llx-0x%08llx\n",
+	       (unsigned long long)pcic->mem_resource[1].start,
+	       (unsigned long long)pcic->mem_resource[1].end,
+	       (unsigned long long)pcic->mem_resource[0].start,
+	       (unsigned long long)pcic->mem_resource[0].end);
+
+	/* register_pci_controller() will request MEM resource */
+	release_resource(&pcic->mem_resource[0]);
+	return pcic;
+ release_and_exit:
+	release_resource(&pcic->mem_resource[0]);
+ free_and_exit:
+	kfree(new);
+	printk(KERN_ERR "PCI: Failed to allocate resources.\n");
+	return NULL;
+}
+
+static int __init
+txx9_arch_pci_init(void)
+{
+	PCIBIOS_MIN_IO = 0x8000;	/* reseve legacy I/O space */
+	return 0;
+}
+arch_initcall(txx9_arch_pci_init);
+
+/* IRQ/IDSEL mapping */
+int txx9_pci_option =
+#ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT
+	TXX9_PCI_OPT_PICMG |
+#endif
+	TXX9_PCI_OPT_CLK_AUTO;
+
+enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT;
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static irqreturn_t i8259_interrupt(int irq, void *dev_id)
+{
+	int isairq;
+
+	isairq = i8259_irq();
+	if (unlikely(isairq <= I8259A_IRQ_BASE))
+		return IRQ_NONE;
+	generic_handle_irq(isairq);
+	return IRQ_HANDLED;
+}
+
+static int __init
+txx9_i8259_irq_setup(int irq)
+{
+	int err;
+
+	init_i8259_irqs();
+	err = request_irq(irq, &i8259_interrupt, IRQF_DISABLED|IRQF_SHARED,
+			  "cascade(i8259)", (void *)(long)irq);
+	if (!err)
+		printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq);
+	return err;
+}
+
+static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	int irq;	/* PCI/ISA Bridge interrupt */
+	u8 reg_64;
+	u32 reg_b0;
+	u8 reg_e1;
+	irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */
+	if (!irq)
+		return;
+	txx9_i8259_irq_setup(irq);
+	pci_read_config_byte(dev, 0x64, &reg_64);
+	pci_read_config_dword(dev, 0xb0, &reg_b0);
+	pci_read_config_byte(dev, 0xe1, &reg_e1);
+	/* serial irq control */
+	reg_64 = 0xd0;
+	/* serial irq pin */
+	reg_b0 |= 0x00010000;
+	/* ide irq on isa14 */
+	reg_e1 &= 0xf0;
+	reg_e1 |= 0x0d;
+	pci_write_config_byte(dev, 0x64, reg_64);
+	pci_write_config_dword(dev, 0xb0, reg_b0);
+	pci_write_config_byte(dev, 0xe1, reg_e1);
+
+	smsc_fdc37m81x_init(0x3f0);
+	smsc_fdc37m81x_config_beg();
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
+				  SMSC_FDC37M81X_KBD);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
+				  1);
+	smsc_fdc37m81x_config_end();
+}
+
+static void quirk_slc90e66_ide(struct pci_dev *dev)
+{
+	unsigned char dat;
+	int regs[2] = {0x41, 0x43};
+	int i;
+
+	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14);
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat);
+	printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat);
+	/* enable SMSC SLC90E66 IDE */
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		pci_read_config_byte(dev, regs[i], &dat);
+		pci_write_config_byte(dev, regs[i], dat | 0x80);
+		pci_read_config_byte(dev, regs[i], &dat);
+		printk(KERN_CONT " IDETIM%d %02x", i, dat);
+	}
+	pci_read_config_byte(dev, 0x5c, &dat);
+	/*
+	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+	 *
+	 * This line of code is intended to provide the user with a work
+	 * around solution to the anomalies cited in SMSC's anomaly sheet
+	 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
+	 *
+	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+	 */
+	dat |= 0x01;
+	pci_write_config_byte(dev, regs[i], dat);
+	pci_read_config_byte(dev, 0x5c, &dat);
+	printk(KERN_CONT " REG5C %02x", dat);
+	printk(KERN_CONT "\n");
+}
+#endif /* CONFIG_TOSHIBA_FPCIB0 */
+
+static void final_fixup(struct pci_dev *dev)
+{
+	unsigned char bist;
+
+	/* Do build-in self test */
+	if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL &&
+	    (bist & PCI_BIST_CAPABLE)) {
+		unsigned long timeout;
+		pci_set_power_state(dev, PCI_D0);
+		printk(KERN_INFO "PCI: %s BIST...", pci_name(dev));
+		pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START);
+		timeout = jiffies + HZ * 2;	/* timeout after 2 sec */
+		do {
+			pci_read_config_byte(dev, PCI_BIST, &bist);
+			if (time_after(jiffies, timeout))
+				break;
+		} while (bist & PCI_BIST_START);
+		if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START))
+			printk(KERN_CONT "failed. (0x%x)\n", bist);
+		else
+			printk(KERN_CONT "OK.\n");
+	}
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	quirk_slc90e66_bridge);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+	quirk_slc90e66_ide);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+	quirk_slc90e66_ide);
+#endif
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
+DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return txx9_board_vec->pci_map_irq(dev, slot, pin);
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
new file mode 100644
index 000000000000..8c60c78b9a9e
--- /dev/null
+++ b/arch/mips/txx9/generic/setup.c
@@ -0,0 +1,246 @@
+/*
+ * linux/arch/mips/txx9/generic/setup.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/txx9/generic.h>
+#ifdef CONFIG_CPU_TX49XX
+#include <asm/txx9/tx4938.h>
+#endif
+
+/* EBUSC settings of TX4927, etc. */
+struct resource txx9_ce_res[8];
+static char txx9_ce_res_name[8][4];	/* "CEn" */
+
+/* pcode, internal register */
+unsigned int txx9_pcode;
+char txx9_pcode_str[8];
+static struct resource txx9_reg_res = {
+	.name = txx9_pcode_str,
+	.flags = IORESOURCE_MEM,
+};
+void __init
+txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(txx9_ce_res); i++) {
+		sprintf(txx9_ce_res_name[i], "CE%d", i);
+		txx9_ce_res[i].flags = IORESOURCE_MEM;
+		txx9_ce_res[i].name = txx9_ce_res_name[i];
+	}
+
+	sprintf(txx9_pcode_str, "TX%x", pcode);
+	if (base) {
+		txx9_reg_res.start = base & 0xfffffffffULL;
+		txx9_reg_res.end = (base & 0xfffffffffULL) + (size - 1);
+		request_resource(&iomem_resource, &txx9_reg_res);
+	}
+}
+
+/* clocks */
+unsigned int txx9_master_clock;
+unsigned int txx9_cpu_clock;
+unsigned int txx9_gbus_clock;
+
+int txx9_ccfg_toeon __initdata = 1;
+
+/* Minimum CLK support */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "spi-baseclk"))
+		return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 4);
+	if (!strcmp(id, "imbus_clk"))
+		return (struct clk *)((unsigned long)txx9_gbus_clock / 2);
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return (unsigned long)clk;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+/* GPIO support */
+
+#ifdef CONFIG_GENERIC_GPIO
+int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+#endif
+
+extern struct txx9_board_vec jmr3927_vec;
+extern struct txx9_board_vec rbtx4927_vec;
+extern struct txx9_board_vec rbtx4937_vec;
+extern struct txx9_board_vec rbtx4938_vec;
+
+struct txx9_board_vec *txx9_board_vec __initdata;
+static char txx9_system_type[32];
+
+void __init prom_init_cmdline(void)
+{
+	int argc = (int)fw_arg0;
+	char **argv = (char **)fw_arg1;
+	int i;			/* Always ignore the "-c" at argv[0] */
+#ifdef CONFIG_64BIT
+	char *fixed_argv[32];
+	for (i = 0; i < argc; i++)
+		fixed_argv[i] = (char *)(long)(*((__s32 *)argv + i));
+	argv = fixed_argv;
+#endif
+
+	/* ignore all built-in args if any f/w args given */
+	if (argc > 1)
+		*arcs_cmdline = '\0';
+
+	for (i = 1; i < argc; i++) {
+		if (i != 1)
+			strcat(arcs_cmdline, " ");
+		strcat(arcs_cmdline, argv[i]);
+	}
+}
+
+void __init prom_init(void)
+{
+#ifdef CONFIG_CPU_TX39XX
+	txx9_board_vec = &jmr3927_vec;
+#endif
+#ifdef CONFIG_CPU_TX49XX
+	switch (TX4938_REV_PCODE()) {
+#ifdef CONFIG_TOSHIBA_RBTX4927
+	case 0x4927:
+		txx9_board_vec = &rbtx4927_vec;
+		break;
+	case 0x4937:
+		txx9_board_vec = &rbtx4937_vec;
+		break;
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938
+	case 0x4938:
+		txx9_board_vec = &rbtx4938_vec;
+		break;
+#endif
+	}
+#endif
+
+	strcpy(txx9_system_type, txx9_board_vec->system);
+
+	txx9_board_vec->prom_init();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+const char *get_system_type(void)
+{
+	return txx9_system_type;
+}
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+/* wrappers */
+void __init plat_mem_setup(void)
+{
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0UL;	/* no limit */
+	iomem_resource.start = 0;
+	iomem_resource.end = ~0UL;	/* no limit */
+	txx9_board_vec->mem_setup();
+}
+
+void __init arch_init_irq(void)
+{
+	txx9_board_vec->irq_setup();
+}
+
+void __init plat_time_init(void)
+{
+	txx9_board_vec->time_init();
+}
+
+static int __init _txx9_arch_init(void)
+{
+	if (txx9_board_vec->arch_init)
+		txx9_board_vec->arch_init();
+	return 0;
+}
+arch_initcall(_txx9_arch_init);
+
+static int __init _txx9_device_init(void)
+{
+	if (txx9_board_vec->device_init)
+		txx9_board_vec->device_init();
+	return 0;
+}
+device_initcall(_txx9_device_init);
+
+int (*txx9_irq_dispatch)(int pending);
+asmlinkage void plat_irq_dispatch(void)
+{
+	int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	int irq = txx9_irq_dispatch(pending);
+
+	if (likely(irq >= 0))
+		do_IRQ(irq);
+	else
+		spurious_interrupt();
+}
+
+/* see include/asm-mips/mach-tx39xx/mangle-port.h, for example. */
+#ifdef NEEDS_TXX9_SWIZZLE_ADDR_B
+static unsigned long __swizzle_addr_none(unsigned long port)
+{
+	return port;
+}
+unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none;
+EXPORT_SYMBOL(__swizzle_addr_b);
+#endif
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
new file mode 100644
index 000000000000..89d6e28add93
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -0,0 +1,194 @@
+/*
+ * TX4927 setup routines
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/param.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4927.h>
+
+void __init tx4927_wdr_init(void)
+{
+	/* clear WatchDogReset (W1C) */
+	tx4927_ccfg_set(TX4927_CCFG_WDRST);
+	/* do reset on watchdog */
+	tx4927_ccfg_set(TX4927_CCFG_WR);
+}
+
+static struct resource tx4927_sdram_resource[4];
+
+void __init tx4927_setup(void)
+{
+	int i;
+	__u32 divmode;
+	int cpuclk = 0;
+	u64 ccfg;
+
+	txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
+			  TX4927_REG_SIZE);
+
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(TX4927_EBUSC_CR(i) & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX4927_EBUSC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX4927_EBUSC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	ccfg = ____raw_readq(&tx4927_ccfgptr->ccfg);
+	if (txx9_master_clock) {
+		/* calculate gbus_clock and cpu_clock from master_clock */
+		divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_8:
+		case TX4927_CCFG_DIVMODE_10:
+		case TX4927_CCFG_DIVMODE_12:
+		case TX4927_CCFG_DIVMODE_16:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_2:
+		case TX4927_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4927_CCFG_DIVMODE_2_5:
+		case TX4927_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4927_CCFG_DIVMODE_3:
+		case TX4927_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4927_CCFG_DIVMODE_4:
+		case TX4927_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0)
+			txx9_cpu_clock = 200000000;	/* 200MHz */
+		/* calculate gbus_clock and master_clock from cpu_clock */
+		cpuclk = txx9_cpu_clock;
+		divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_2:
+		case TX4927_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4927_CCFG_DIVMODE_2_5:
+		case TX4927_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4927_CCFG_DIVMODE_3:
+		case TX4927_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4927_CCFG_DIVMODE_4:
+		case TX4927_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		}
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_8:
+		case TX4927_CCFG_DIVMODE_10:
+		case TX4927_CCFG_DIVMODE_12:
+		case TX4927_CCFG_DIVMODE_16:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	tx4927_wdr_init();
+	/* clear BusErrorOnWrite flag (W1C) */
+	tx4927_ccfg_set(TX4927_CCFG_BEOW);
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx4927_ccfg_set(TX4927_CCFG_TOE);
+
+	/* DMA selection */
+	txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_DMASEL_ALL);
+
+	/* Use external clock for external arbiter */
+	if (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB))
+		txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_PCICLKEN_ALL);
+
+	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+	       txx9_pcode_str,
+	       (cpuclk + 500000) / 1000000,
+	       (txx9_master_clock + 500000) / 1000000,
+	       (__u32)____raw_readq(&tx4927_ccfgptr->crir),
+	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->pcfg));
+
+	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+	for (i = 0; i < 4; i++) {
+		__u64 cr = TX4927_SDRAMC_CR(i);
+		unsigned long base, size;
+		if (!((__u32)cr & 0x00000400))
+			continue;	/* disabled */
+		base = (unsigned long)(cr >> 49) << 21;
+		size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
+		printk(" CR%d:%016llx", i, (unsigned long long)cr);
+		tx4927_sdram_resource[i].name = "SDRAM";
+		tx4927_sdram_resource[i].start = base;
+		tx4927_sdram_resource[i].end = base + size - 1;
+		tx4927_sdram_resource[i].flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4927_sdram_resource[i]);
+	}
+	printk(" TR:%09llx\n",
+	       (unsigned long long)____raw_readq(&tx4927_sdramcptr->tr));
+
+	/* TMR */
+	/* disable all timers */
+	for (i = 0; i < TX4927_NR_TMR; i++)
+		txx9_tmr_init(TX4927_TMR_REG(i) & 0xfffffffffULL);
+
+	/* PIO */
+	txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
+	__raw_writel(0, &tx4927_pioptr->maskcpu);
+	__raw_writel(0, &tx4927_pioptr->maskext);
+}
+
+void __init tx4927_time_init(unsigned int tmrnr)
+{
+	if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4927_TMR_REG(tmrnr) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + TX4927_IR_TMR(tmrnr),
+				     TXX9_IMCLK);
+}
+
+void __init tx4927_setup_serial(void)
+{
+#ifdef CONFIG_SERIAL_TXX9
+	int i;
+	struct uart_port req;
+
+	for (i = 0; i < 2; i++) {
+		memset(&req, 0, sizeof(req));
+		req.line = i;
+		req.iotype = UPIO_MEM;
+		req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i);
+		req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL;
+		req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
+		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+		req.uartclk = TXX9_IMCLK;
+		early_serial_txx9_setup(&req);
+	}
+#endif /* CONFIG_SERIAL_TXX9 */
+}
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
new file mode 100644
index 000000000000..317378d8579d
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -0,0 +1,259 @@
+/*
+ * TX4938/4937 setup routines
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/param.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4938.h>
+
+void __init tx4938_wdr_init(void)
+{
+	/* clear WatchDogReset (W1C) */
+	tx4938_ccfg_set(TX4938_CCFG_WDRST);
+	/* do reset on watchdog */
+	tx4938_ccfg_set(TX4938_CCFG_WR);
+}
+
+static struct resource tx4938_sdram_resource[4];
+static struct resource tx4938_sram_resource;
+
+#define TX4938_SRAM_SIZE 0x800
+
+void __init tx4938_setup(void)
+{
+	int i;
+	__u32 divmode;
+	int cpuclk = 0;
+	u64 ccfg;
+
+	txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
+			  TX4938_REG_SIZE);
+
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(TX4938_EBUSC_CR(i) & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
+	if (txx9_master_clock) {
+		/* calculate gbus_clock and cpu_clock from master_clock */
+		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			cpuclk = txx9_gbus_clock * 9 / 2; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0)
+			txx9_cpu_clock = 300000000;	/* 300MHz */
+		/* calculate gbus_clock and master_clock from cpu_clock */
+		cpuclk = txx9_cpu_clock;
+		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = cpuclk * 2 / 9; break;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	tx4938_wdr_init();
+	/* clear BusErrorOnWrite flag (W1C) */
+	tx4938_ccfg_set(TX4938_CCFG_BEOW);
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx4938_ccfg_set(TX4938_CCFG_TOE);
+
+	/* DMA selection */
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL);
+
+	/* Use external clock for external arbiter */
+	if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB))
+		txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL);
+
+	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+	       txx9_pcode_str,
+	       (cpuclk + 500000) / 1000000,
+	       (txx9_master_clock + 500000) / 1000000,
+	       (__u32)____raw_readq(&tx4938_ccfgptr->crir),
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg));
+
+	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+	for (i = 0; i < 4; i++) {
+		__u64 cr = TX4938_SDRAMC_CR(i);
+		unsigned long base, size;
+		if (!((__u32)cr & 0x00000400))
+			continue;	/* disabled */
+		base = (unsigned long)(cr >> 49) << 21;
+		size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
+		printk(" CR%d:%016llx", i, (unsigned long long)cr);
+		tx4938_sdram_resource[i].name = "SDRAM";
+		tx4938_sdram_resource[i].start = base;
+		tx4938_sdram_resource[i].end = base + size - 1;
+		tx4938_sdram_resource[i].flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4938_sdram_resource[i]);
+	}
+	printk(" TR:%09llx\n",
+	       (unsigned long long)____raw_readq(&tx4938_sdramcptr->tr));
+
+	/* SRAM */
+	if (txx9_pcode == 0x4938 && ____raw_readq(&tx4938_sramcptr->cr) & 1) {
+		unsigned int size = TX4938_SRAM_SIZE;
+		tx4938_sram_resource.name = "SRAM";
+		tx4938_sram_resource.start =
+			(____raw_readq(&tx4938_sramcptr->cr) >> (39-11))
+			& ~(size - 1);
+		tx4938_sram_resource.end =
+			tx4938_sram_resource.start + TX4938_SRAM_SIZE - 1;
+		tx4938_sram_resource.flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4938_sram_resource);
+	}
+
+	/* TMR */
+	/* disable all timers */
+	for (i = 0; i < TX4938_NR_TMR; i++)
+		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
+
+	/* DMA */
+	for (i = 0; i < 2; i++)
+		____raw_writeq(TX4938_DMA_MCR_MSTEN,
+			       (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
+
+	/* PIO */
+	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
+	__raw_writel(0, &tx4938_pioptr->maskcpu);
+	__raw_writel(0, &tx4938_pioptr->maskext);
+
+	if (txx9_pcode == 0x4938) {
+		__u64 pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+		/* set PCIC1 reset */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+		if (pcfg & (TX4938_PCFG_ETH0_SEL | TX4938_PCFG_ETH1_SEL)) {
+			mdelay(1);	/* at least 128 cpu clock */
+			/* clear PCIC1 reset */
+			txx9_clear64(&tx4938_ccfgptr->clkctr,
+				     TX4938_CLKCTR_PCIC1RST);
+		} else {
+			printk(KERN_INFO "%s: stop PCIC1\n", txx9_pcode_str);
+			/* stop PCIC1 */
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_PCIC1CKD);
+		}
+		if (!(pcfg & TX4938_PCFG_ETH0_SEL)) {
+			printk(KERN_INFO "%s: stop ETH0\n", txx9_pcode_str);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH0RST);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH0CKD);
+		}
+		if (!(pcfg & TX4938_PCFG_ETH1_SEL)) {
+			printk(KERN_INFO "%s: stop ETH1\n", txx9_pcode_str);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH1RST);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH1CKD);
+		}
+	}
+}
+
+void __init tx4938_time_init(unsigned int tmrnr)
+{
+	if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4938_TMR_REG(tmrnr) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + TX4938_IR_TMR(tmrnr),
+				     TXX9_IMCLK);
+}
+
+void __init tx4938_setup_serial(void)
+{
+#ifdef CONFIG_SERIAL_TXX9
+	int i;
+	struct uart_port req;
+	unsigned int ch_mask = 0;
+
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
+		ch_mask |= 1 << 1; /* disable SIO1 by PCFG setting */
+	for (i = 0; i < 2; i++) {
+		if ((1 << i) & ch_mask)
+			continue;
+		memset(&req, 0, sizeof(req));
+		req.line = i;
+		req.iotype = UPIO_MEM;
+		req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i);
+		req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL;
+		req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i);
+		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+		req.uartclk = TXX9_IMCLK;
+		early_serial_txx9_setup(&req);
+	}
+#endif /* CONFIG_SERIAL_TXX9 */
+}
diff --git a/arch/mips/tx4927/common/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index 33f517bc9a08..69e487467fa5 100644
--- a/arch/mips/tx4927/common/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/tx4927/smsc_fdc37m81x.h>
+#include <asm/txx9/smsc_fdc37m81x.h>
 
 #define DEBUG
 
diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/txx9/jmr3927/Makefile
index d86e30dca8f3..ba292c945669 100644
--- a/arch/mips/jmr3927/rbhma3100/Makefile
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -2,7 +2,7 @@
 # Makefile for TOSHIBA JMR-TX3927 board
 #
 
-obj-y	 			+= init.o irq.o setup.o
-obj-$(CONFIG_KGDB)		+= kgdb_io.o
+obj-y	+= prom.o irq.o setup.o
+obj-$(CONFIG_KGDB)	+= kgdb_io.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/txx9/jmr3927/irq.c
index 3a47e8ce1196..070c9a115e57 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -39,7 +39,8 @@
 #include <asm/system.h>
 
 #include <asm/processor.h>
-#include <asm/jmr3927/jmr3927.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/jmr3927.h>
 
 #if JMR3927_IRQ_END > NR_IRQS
 #error JMR3927_IRQ_END > NR_IRQS
@@ -77,38 +78,32 @@ static void unmask_irq_ioc(unsigned int irq)
 	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
 }
 
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned long cp0_cause = read_c0_cause();
-	int irq;
-
-	if ((cp0_cause & CAUSEF_IP7) == 0)
-		return;
-	irq = (cp0_cause >> CAUSEB_IP2) & 0x0f;
-
-	do_IRQ(irq + JMR3927_IRQ_IRC);
-}
-
-static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id)
+static int jmr3927_ioc_irqroute(void)
 {
 	unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR);
 	int i;
 
 	for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) {
-		if (istat & (1 << i)) {
-			irq = JMR3927_IRQ_IOC + i;
-			do_IRQ(irq);
-		}
+		if (istat & (1 << i))
+			return JMR3927_IRQ_IOC + i;
 	}
-	return IRQ_HANDLED;
+	return -1;
 }
 
-static struct irqaction ioc_action = {
-	.handler = jmr3927_ioc_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "IOC",
-};
+static int jmr3927_irq_dispatch(int pending)
+{
+	int irq;
 
+	if ((pending & CAUSEF_IP7) == 0)
+		return -1;
+	irq = (pending >> CAUSEB_IP2) & 0x0f;
+	irq += JMR3927_IRQ_IRC;
+	if (irq == JMR3927_IRQ_IOCINT)
+		irq = jmr3927_ioc_irqroute();
+	return irq;
+}
+
+#ifdef CONFIG_PCI
 static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
 {
 	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
@@ -122,11 +117,13 @@ static struct irqaction pcierr_action = {
 	.mask = CPU_MASK_NONE,
 	.name = "PCI error",
 };
+#endif
 
 static void __init jmr3927_irq_init(void);
 
-void __init arch_init_irq(void)
+void __init jmr3927_irq_setup(void)
 {
+	txx9_irq_dispatch = jmr3927_irq_dispatch;
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
 	/* all IRC interrupt mode are Low Active. */
@@ -144,7 +141,7 @@ void __init arch_init_irq(void)
 	jmr3927_irq_init();
 
 	/* setup IOC interrupt 1 (PCI, MODEM) */
-	setup_irq(JMR3927_IRQ_IOCINT, &ioc_action);
+	set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
 
 #ifdef CONFIG_PCI
 	setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
diff --git a/arch/mips/jmr3927/rbhma3100/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c
index 342579cfdc01..5bd757e56f79 100644
--- a/arch/mips/jmr3927/rbhma3100/kgdb_io.c
+++ b/arch/mips/txx9/jmr3927/kgdb_io.c
@@ -31,7 +31,7 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <asm/jmr3927/jmr3927.h>
+#include <asm/txx9/jmr3927.h>
 
 #define TIMEOUT       0xffffff
 
diff --git a/arch/mips/jmr3927/common/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 5398813e50e6..2cadb423face 100644
--- a/arch/mips/jmr3927/common/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -35,38 +35,42 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/string.h>
-
 #include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/jmr3927.h>
 
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
+#define TIMEOUT       0xffffff
 
-void  __init prom_init_cmdline(void)
+void
+prom_putchar(char c)
 {
-	char *cp;
-	int actr;
-	int prom_argc = fw_arg0;
-	char **prom_argv = (char **) fw_arg1;
+        int i = 0;
 
-	actr = 1; /* Always ignore argv[0] */
+        do {
+            i++;
+            if (i>TIMEOUT)
+                break;
+        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
+	tx3927_sioptr(1)->tfifo = c;
+	return;
+}
 
-	cp = &(arcs_cmdline[0]);
-	while(actr < prom_argc) {
-	        strcpy(cp, prom_argv[actr]);
-		cp += strlen(prom_argv[actr]);
-		*cp++ = ' ';
-		actr++;
-	}
-	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
-		--cp;
-	*cp = '\0';
+void
+puts(const char *cp)
+{
+    while (*cp)
+	prom_putchar(*cp++);
+    prom_putchar('\r');
+    prom_putchar('\n');
 }
 
-void __init prom_free_prom_memory(void)
+void __init jmr3927_prom_init(void)
 {
+	/* CCFG */
+	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
+		puts("Warning: TX3927 TLB off\n");
+
+	prom_init_cmdline();
+	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/txx9/jmr3927/setup.c
index f39c444e42d4..03647ebe4130 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -30,21 +30,20 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
-#include <linux/clk.h>
 #include <linux/gpio.h>
 #ifdef CONFIG_SERIAL_TXX9
 #include <linux/serial_core.h>
 #endif
-
 #include <asm/txx9tmr.h>
 #include <asm/txx9pio.h>
 #include <asm/reboot.h>
-#include <asm/jmr3927/jmr3927.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/jmr3927.h>
 #include <asm/mipsregs.h>
 
 extern void puts(const char *cp);
@@ -83,7 +82,7 @@ static void jmr3927_machine_power_off(void)
 	while (1);
 }
 
-void __init plat_time_init(void)
+static void __init jmr3927_time_init(void)
 {
 	txx9_clockevent_init(TX3927_TMR_REG(0),
 			     TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
@@ -94,12 +93,9 @@ void __init plat_time_init(void)
 #define DO_WRITE_THROUGH
 #define DO_ENABLE_CACHE
 
-extern char * __init prom_getcmdline(void);
 static void jmr3927_board_init(void);
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
 
-void __init plat_mem_setup(void)
+static void __init jmr3927_mem_setup(void)
 {
 	char *argptr;
 
@@ -109,14 +105,6 @@ void __init plat_mem_setup(void)
 	_machine_halt = jmr3927_machine_halt;
 	pm_power_off = jmr3927_machine_power_off;
 
-	/*
-	 * IO/MEM resources.
-	 */
-	ioport_resource.start = pci_io_resource.start;
-	ioport_resource.end = pci_io_resource.end;
-	iomem_resource.start = 0;
-	iomem_resource.end = 0xffffffff;
-
 	/* Reboot on panic */
 	panic_timeout = 180;
 
@@ -191,9 +179,33 @@ void __init plat_mem_setup(void)
 
 static void tx3927_setup(void);
 
+static void __init jmr3927_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+	int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB);
+	struct pci_controller *c;
+
+	c = txx9_alloc_pci_controller(&txx9_primary_pcic,
+				      JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE,
+				      JMR3927_PCIIO, JMR3927_PCIIO_SIZE);
+	register_pci_controller(c);
+	if (!extarb) {
+		/* Reset PCI Bus */
+		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+		udelay(100);
+		jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
+				    JMR3927_IOC_RESET_ADDR);
+		udelay(100);
+		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+	}
+	tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+#endif /* CONFIG_PCI */
+}
+
 static void __init jmr3927_board_init(void)
 {
 	tx3927_setup();
+	jmr3927_pci_setup();
 
 	/* SIO0 DTR on */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
@@ -210,15 +222,9 @@ static void __init jmr3927_board_init(void)
 static void __init tx3927_setup(void)
 {
 	int i;
-#ifdef CONFIG_PCI
-	unsigned long mips_pci_io_base = JMR3927_PCIIO;
-	unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE;
-	unsigned long mips_pci_mem_base = JMR3927_PCIMEM;
-	unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
-	/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
-	unsigned long mips_pci_io_pciaddr = 0;
-#endif
 
+	txx9_cpu_clock = JMR3927_CORECLK;
+	txx9_gbus_clock = JMR3927_GBUSCLK;
 	/* SDRAMC are configured by PROM */
 
 	/* ROMC */
@@ -272,74 +278,6 @@ static void __init tx3927_setup(void)
 	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
 #endif
 
-#ifdef CONFIG_PCI
-	/* PCIC */
-	printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:",
-	       tx3927_pcicptr->did, tx3927_pcicptr->vid,
-	       tx3927_pcicptr->rid);
-	if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) {
-		printk("External\n");
-		/* XXX */
-	} else {
-		printk("Internal\n");
-
-		/* Reset PCI Bus */
-		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-		udelay(100);
-		jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
-				    JMR3927_IOC_RESET_ADDR);
-		udelay(100);
-		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-
-
-		/* Disable External PCI Config. Access */
-		tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
-#ifdef __BIG_ENDIAN
-		tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
-			TX3927_PCIC_LBC_TIBSE |
-			TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
-#endif
-		/* LB->PCI mappings */
-		tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1);
-		tx3927_pcicptr->ilbioma = mips_pci_io_base;
-		tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr;
-		tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1);
-		tx3927_pcicptr->ilbmma = mips_pci_mem_base;
-		tx3927_pcicptr->ipbmma = mips_pci_mem_base;
-		/* PCI->LB mappings */
-		tx3927_pcicptr->iobas = 0xffffffff;
-		tx3927_pcicptr->ioba = 0;
-		tx3927_pcicptr->tlbioma = 0;
-		tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1);
-		tx3927_pcicptr->mba = 0;
-		tx3927_pcicptr->tlbmma = 0;
-		/* Enable Direct mapping Address Space Decoder */
-		tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
-
-		/* Clear All Local Bus Status */
-		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
-		/* Enable All Local Bus Interrupts */
-		tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
-		/* Clear All PCI Status Error */
-		tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
-		/* Enable All PCI Status Error Interrupts */
-		tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
-
-		/* PCIC Int => IRC IRQ10 */
-		tx3927_pcicptr->il = TX3927_IR_PCI;
-		/* Target Control (per errata) */
-		tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
-
-		/* Enable Bus Arbiter */
-		tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
-
-		tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	}
-#endif /* CONFIG_PCI */
-
 	/* PIO */
 	/* PIO[15:12] connected to LEDs */
 	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
@@ -366,7 +304,7 @@ static void __init tx3927_setup(void)
 }
 
 /* This trick makes rtc-ds1742 driver usable as is. */
-unsigned long __swizzle_addr_b(unsigned long port)
+static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
 {
 	if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR)
 		return port;
@@ -377,7 +315,6 @@ unsigned long __swizzle_addr_b(unsigned long port)
 	return port | 1;
 #endif
 }
-EXPORT_SYMBOL(__swizzle_addr_b);
 
 static int __init jmr3927_rtc_init(void)
 {
@@ -390,7 +327,6 @@ static int __init jmr3927_rtc_init(void)
 	dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
-device_initcall(jmr3927_rtc_init);
 
 /* Watchdog support */
 
@@ -410,36 +346,22 @@ static int __init jmr3927_wdt_init(void)
 {
 	return txx9_wdt_init(TX3927_TMR_REG(2));
 }
-device_initcall(jmr3927_wdt_init);
 
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
+static void __init jmr3927_device_init(void)
 {
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)JMR3927_IMCLK;
-	return ERR_PTR(-ENOENT);
+	__swizzle_addr_b = jmr3927_swizzle_addr_b;
+	jmr3927_rtc_init();
+	jmr3927_wdt_init();
 }
-EXPORT_SYMBOL(clk_get);
 
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
+struct txx9_board_vec jmr3927_vec __initdata = {
+	.system = "Toshiba JMR_TX3927",
+	.prom_init = jmr3927_prom_init,
+	.mem_setup = jmr3927_mem_setup,
+	.irq_setup = jmr3927_irq_setup,
+	.time_init = jmr3927_time_init,
+	.device_init = jmr3927_device_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = jmr3927_pci_map_irq,
+#endif
+};
diff --git a/arch/mips/txx9/rbtx4927/Makefile b/arch/mips/txx9/rbtx4927/Makefile
new file mode 100644
index 000000000000..f3e1f597b4f1
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/Makefile
@@ -0,0 +1,3 @@
+obj-y	+= prom.o setup.o irq.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
new file mode 100644
index 000000000000..cd748a930328
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -0,0 +1,197 @@
+/*
+ * Toshiba RBTX4927 specific interrupt handlers
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+/*
+IRQ  Device
+00   RBTX4927-ISA/00
+01   RBTX4927-ISA/01 PS2/Keyboard
+02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
+03   RBTX4927-ISA/03
+04   RBTX4927-ISA/04
+05   RBTX4927-ISA/05
+06   RBTX4927-ISA/06
+07   RBTX4927-ISA/07
+08   RBTX4927-ISA/08
+09   RBTX4927-ISA/09
+10   RBTX4927-ISA/10
+11   RBTX4927-ISA/11
+12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
+13   RBTX4927-ISA/13
+14   RBTX4927-ISA/14 IDE
+15   RBTX4927-ISA/15
+
+16   TX4927-CP0/00 Software 0
+17   TX4927-CP0/01 Software 1
+18   TX4927-CP0/02 Cascade TX4927-CP0
+19   TX4927-CP0/03 Multiplexed -- do not use
+20   TX4927-CP0/04 Multiplexed -- do not use
+21   TX4927-CP0/05 Multiplexed -- do not use
+22   TX4927-CP0/06 Multiplexed -- do not use
+23   TX4927-CP0/07 CPU TIMER
+
+24   TX4927-PIC/00
+25   TX4927-PIC/01
+26   TX4927-PIC/02
+27   TX4927-PIC/03 Cascade RBTX4927-IOC
+28   TX4927-PIC/04
+29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
+30   TX4927-PIC/06
+31   TX4927-PIC/07
+32   TX4927-PIC/08 TX4927 SerialIO Channel 0
+33   TX4927-PIC/09 TX4927 SerialIO Channel 1
+34   TX4927-PIC/10
+35   TX4927-PIC/11
+36   TX4927-PIC/12
+37   TX4927-PIC/13
+38   TX4927-PIC/14
+39   TX4927-PIC/15
+40   TX4927-PIC/16 TX4927 PCI PCI-C
+41   TX4927-PIC/17
+42   TX4927-PIC/18
+43   TX4927-PIC/19
+44   TX4927-PIC/20
+45   TX4927-PIC/21
+46   TX4927-PIC/22 TX4927 PCI PCI-ERR
+47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
+48   TX4927-PIC/24
+49   TX4927-PIC/25
+50   TX4927-PIC/26
+51   TX4927-PIC/27
+52   TX4927-PIC/28
+53   TX4927-PIC/29
+54   TX4927-PIC/30
+55   TX4927-PIC/31
+
+56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
+57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
+58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
+59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
+60 RBTX4927-IOC/04
+61 RBTX4927-IOC/05
+62 RBTX4927-IOC/06
+63 RBTX4927-IOC/07
+
+NOTES:
+SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+SouthBridge/ISA/pin=0 no pci irq used by this device
+SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
+SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+SouthBridge/PMC/pin=0 no pci irq used by this device
+SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
+*/
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4927.h>
+
+static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq);
+static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
+
+#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
+static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
+	.name = TOSHIBA_RBTX4927_IOC_NAME,
+	.ack = toshiba_rbtx4927_irq_ioc_disable,
+	.mask = toshiba_rbtx4927_irq_ioc_disable,
+	.mask_ack = toshiba_rbtx4927_irq_ioc_disable,
+	.unmask = toshiba_rbtx4927_irq_ioc_enable,
+};
+
+static int toshiba_rbtx4927_irq_nested(int sw_irq)
+{
+	u8 level3;
+
+	level3 = readb(rbtx4927_imstat_addr) & 0x1f;
+	if (level3)
+		sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
+	return (sw_irq);
+}
+
+static void __init toshiba_rbtx4927_irq_ioc_init(void)
+{
+	int i;
+
+	for (i = RBTX4927_IRQ_IOC;
+	     i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type,
+					 handle_level_irq);
+	set_irq_chained_handler(RBTX4927_IRQ_IOCINT, handle_simple_irq);
+}
+
+static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(rbtx4927_imask_addr);
+	v |= (1 << (irq - RBTX4927_IRQ_IOC));
+	writeb(v, rbtx4927_imask_addr);
+}
+
+static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(rbtx4927_imask_addr);
+	v &= ~(1 << (irq - RBTX4927_IRQ_IOC));
+	writeb(v, rbtx4927_imask_addr);
+	mmiowb();
+}
+
+
+static int rbtx4927_irq_dispatch(int pending)
+{
+	int irq;
+
+	if (pending & STATUSF_IP7)			/* cpu timer */
+		irq = MIPS_CPU_IRQ_BASE + 7;
+	else if (pending & STATUSF_IP2) {		/* tx4927 pic */
+		irq = txx9_irq();
+		if (irq == RBTX4927_IRQ_IOCINT)
+			irq = toshiba_rbtx4927_irq_nested(irq);
+	} else if (pending & STATUSF_IP0)		/* user line 0 */
+		irq = MIPS_CPU_IRQ_BASE + 0;
+	else if (pending & STATUSF_IP1)			/* user line 1 */
+		irq = MIPS_CPU_IRQ_BASE + 1;
+	else
+		irq = -1;
+	return irq;
+}
+
+void __init rbtx4927_irq_setup(void)
+{
+	txx9_irq_dispatch = rbtx4927_irq_dispatch;
+	tx4927_irq_init();
+	toshiba_rbtx4927_irq_ioc_init();
+	/* Onboard 10M Ether: High Active */
+	set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH);
+}
diff --git a/arch/mips/tx4927/common/tx4927_dbgio.c b/arch/mips/txx9/rbtx4927/prom.c
index d8423e001b2d..5c0de54ebdd2 100644
--- a/arch/mips/tx4927/common/tx4927_dbgio.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -1,13 +1,14 @@
 /*
- * linux/arch/mips/tx4927/common/tx4927_dbgio.c
- *
- * kgdb interface for gdb
+ * rbtx4927 specific prom routines
  *
  * Author: MontaVista Software, Inc.
  *         source@mvista.com
  *
  * Copyright 2001-2002 MontaVista Software Inc.
  *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License as published by the
  *  Free Software Foundation; either version 2 of the License, or (at your
@@ -28,19 +29,13 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4927.h>
 
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-u8 getDebugChar(void)
-{
-	extern u8 txx9_sio_kdbg_rd(void);
-	return (txx9_sio_kdbg_rd());
-}
-
-
-int putDebugChar(u8 byte)
+void __init rbtx4927_prom_init(void)
 {
-	extern int txx9_sio_kdbg_wr( u8 ch );
-	return (txx9_sio_kdbg_wr(byte));
+	prom_init_cmdline();
+	add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
new file mode 100644
index 000000000000..3da20ea3e55c
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -0,0 +1,406 @@
+/*
+ * Toshiba rbtx4927 specific setup
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: Michael Pruznick, michael_pruznick@mvista.com
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4927.h>
+#include <asm/txx9/tx4938.h>	/* for TX4937 */
+
+#ifdef CONFIG_PCI
+static void __init tx4927_pci_setup(void)
+{
+	int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66)
+		txx9_pci_option =
+			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+			TXX9_PCI_OPT_CLK_66; /* already configured */
+
+	/* Reset PCI Bus */
+	writeb(1, rbtx4927_pcireset_addr);
+	/* Reset PCIC */
+	txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_66)
+		tx4927_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+	writeb(0, rbtx4927_pcireset_addr);
+	iob();
+
+	tx4927_report_pciclk();
+	tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_AUTO &&
+	    txx9_pci66_check(c, 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(1, rbtx4927_pcireset_addr);
+		/* Reset PCIC */
+		txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+		tx4927_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+		writeb(0, rbtx4927_pcireset_addr);
+		iob();
+		/* Reinitialize PCIC */
+		tx4927_report_pciclk();
+		tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
+	}
+}
+
+static void __init tx4937_pci_setup(void)
+{
+	int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
+		txx9_pci_option =
+			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+			TXX9_PCI_OPT_CLK_66; /* already configured */
+
+	/* Reset PCI Bus */
+	writeb(1, rbtx4927_pcireset_addr);
+	/* Reset PCIC */
+	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_66)
+		tx4938_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	writeb(0, rbtx4927_pcireset_addr);
+	iob();
+
+	tx4938_report_pciclk();
+	tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_AUTO &&
+	    txx9_pci66_check(c, 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(1, rbtx4927_pcireset_addr);
+		/* Reset PCIC */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		tx4938_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		writeb(0, rbtx4927_pcireset_addr);
+		iob();
+		/* Reinitialize PCIC */
+		tx4938_report_pciclk();
+		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	}
+}
+
+static void __init rbtx4927_arch_init(void)
+{
+	tx4927_pci_setup();
+}
+
+static void __init rbtx4937_arch_init(void)
+{
+	tx4937_pci_setup();
+}
+#else
+#define rbtx4927_arch_init NULL
+#define rbtx4937_arch_init NULL
+#endif /* CONFIG_PCI */
+
+static void __noreturn wait_forever(void)
+{
+	while (1)
+		if (cpu_wait)
+			(*cpu_wait)();
+}
+
+static void toshiba_rbtx4927_restart(char *command)
+{
+	printk(KERN_NOTICE "System Rebooting...\n");
+
+	/* enable the s/w reset register */
+	writeb(1, rbtx4927_softresetlock_addr);
+
+	/* wait for enable to be seen */
+	while (!(readb(rbtx4927_softresetlock_addr) & 1))
+		;
+
+	/* do a s/w reset */
+	writeb(1, rbtx4927_softreset_addr);
+
+	/* do something passive while waiting for reset */
+	local_irq_disable();
+	wait_forever();
+	/* no return */
+}
+
+static void toshiba_rbtx4927_halt(void)
+{
+	printk(KERN_NOTICE "System Halted\n");
+	local_irq_disable();
+	wait_forever();
+	/* no return */
+}
+
+static void toshiba_rbtx4927_power_off(void)
+{
+	toshiba_rbtx4927_halt();
+	/* no return */
+}
+
+static void __init rbtx4927_clock_init(void);
+static void __init rbtx4937_clock_init(void);
+
+static void __init rbtx4927_mem_setup(void)
+{
+	u32 cp0_config;
+	char *argptr;
+
+	/* f/w leaves this on at startup */
+	clear_c0_status(ST0_ERL);
+
+	/* enable caches -- HCP5 does this, pmon does not */
+	cp0_config = read_c0_config();
+	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
+	write_c0_config(cp0_config);
+
+	if (TX4927_REV_PCODE() == 0x4927) {
+		rbtx4927_clock_init();
+		tx4927_setup();
+	} else {
+		rbtx4937_clock_init();
+		tx4938_setup();
+	}
+
+	_machine_restart = toshiba_rbtx4927_restart;
+	_machine_halt = toshiba_rbtx4927_halt;
+	pm_power_off = toshiba_rbtx4927_power_off;
+
+#ifdef CONFIG_PCI
+	txx9_alloc_pci_controller(&txx9_primary_pcic,
+				  RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
+				  RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+#else
+	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
+#endif
+
+	tx4927_setup_serial();
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "console=") == NULL) {
+                strcat(argptr, " console=ttyS0,38400");
+        }
+#endif
+
+#ifdef CONFIG_ROOT_NFS
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "root=") == NULL) {
+                strcat(argptr, " root=/dev/nfs rw");
+        }
+#endif
+
+#ifdef CONFIG_IP_PNP
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "ip=") == NULL) {
+                strcat(argptr, " ip=any");
+        }
+#endif
+}
+
+static void __init rbtx4927_clock_init(void)
+{
+	/*
+	 * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
+	 *
+	 * For TX4927:
+	 * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
+	 * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
+	 * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
+	 * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
+	 * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
+	 * i.e. S9[3]: ON (83MHz), OFF (100MHz)
+	 */
+	switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) &
+		TX4927_CCFG_PCIDIVMODE_MASK) {
+	case TX4927_CCFG_PCIDIVMODE_2_5:
+	case TX4927_CCFG_PCIDIVMODE_5:
+		txx9_cpu_clock = 166666666;	/* 166MHz */
+		break;
+	default:
+		txx9_cpu_clock = 200000000;	/* 200MHz */
+	}
+}
+
+static void __init rbtx4937_clock_init(void)
+{
+	/*
+	 * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
+	 *
+	 * For TX4937:
+	 * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
+	 * PCIDIVMODE[10] is 0.
+	 * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
+	 * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
+	 * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
+	 * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
+	 * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
+	 * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
+	 */
+	switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) &
+		TX4938_CCFG_PCIDIVMODE_MASK) {
+	case TX4938_CCFG_PCIDIVMODE_8:
+	case TX4938_CCFG_PCIDIVMODE_4:
+		txx9_cpu_clock = 266666666;	/* 266MHz */
+		break;
+	case TX4938_CCFG_PCIDIVMODE_9:
+	case TX4938_CCFG_PCIDIVMODE_4_5:
+		txx9_cpu_clock = 300000000;	/* 300MHz */
+		break;
+	default:
+		txx9_cpu_clock = 333333333;	/* 333MHz */
+	}
+}
+
+static void __init rbtx4927_time_init(void)
+{
+	tx4927_time_init(0);
+}
+
+static int __init toshiba_rbtx4927_rtc_init(void)
+{
+	struct resource res = {
+		.start	= RBTX4927_BRAMRTC_BASE - IO_BASE,
+		.end	= RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("rtc-ds1742", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static int __init rbtx4927_ne_init(void)
+{
+	struct resource res[] = {
+		{
+			.start	= RBTX4927_RTL_8019_BASE,
+			.end	= RBTX4927_RTL_8019_BASE + 0x20 - 1,
+			.flags	= IORESOURCE_IO,
+		}, {
+			.start	= RBTX4927_RTL_8019_IRQ,
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("ne", -1,
+						res, ARRAY_SIZE(res));
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+/* Watchdog support */
+
+static int __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("txx9wdt", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static int __init rbtx4927_wdt_init(void)
+{
+	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static void __init rbtx4927_device_init(void)
+{
+	toshiba_rbtx4927_rtc_init();
+	rbtx4927_ne_init();
+	rbtx4927_wdt_init();
+}
+
+struct txx9_board_vec rbtx4927_vec __initdata = {
+	.system = "Toshiba RBTX4927",
+	.prom_init = rbtx4927_prom_init,
+	.mem_setup = rbtx4927_mem_setup,
+	.irq_setup = rbtx4927_irq_setup,
+	.time_init = rbtx4927_time_init,
+	.device_init = rbtx4927_device_init,
+	.arch_init = rbtx4927_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = rbtx4927_pci_map_irq,
+#endif
+};
+struct txx9_board_vec rbtx4937_vec __initdata = {
+	.system = "Toshiba RBTX4937",
+	.prom_init = rbtx4927_prom_init,
+	.mem_setup = rbtx4927_mem_setup,
+	.irq_setup = rbtx4927_irq_setup,
+	.time_init = rbtx4927_time_init,
+	.device_init = rbtx4927_device_init,
+	.arch_init = rbtx4937_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = rbtx4927_pci_map_irq,
+#endif
+};
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile
index 2316dd7dd1bd..9dcc52ae5b9d 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/Makefile
+++ b/arch/mips/txx9/rbtx4938/Makefile
@@ -1,7 +1,3 @@
-#
-# Makefile for common code for Toshiba TX4927 based systems
-#
-
 obj-y	+= prom.o setup.o irq.o spi_eeprom.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index 4d6a8dc46c76..3971a061657a 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c
- *
  * Toshiba RBTX4938 specific interrupt handlers
  * Copyright (C) 2000-2001 Toshiba Corporation
  *
@@ -68,7 +66,9 @@ IRQ  Device
 */
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/tx4938/rbtx4938.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4938.h>
 
 static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
 static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
@@ -82,26 +82,17 @@ static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
 	.unmask = toshiba_rbtx4938_irq_ioc_enable,
 };
 
-int
-toshiba_rbtx4938_irq_nested(int sw_irq)
+static int toshiba_rbtx4938_irq_nested(int sw_irq)
 {
 	u8 level3;
 
 	level3 = readb(rbtx4938_imstat_addr);
 	if (level3)
 		/* must use fls so onboard ATA has priority */
-		sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;
-
+		sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1;
 	return sw_irq;
 }
 
-static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
-	.handler = no_action,
-	.flags = 0,
-	.mask = CPU_MASK_NONE,
-	.name = TOSHIBA_RBTX4938_IOC_NAME,
-};
-
 /**********************************************************************************/
 /* Functions for ioc                                                              */
 /**********************************************************************************/
@@ -110,13 +101,12 @@ toshiba_rbtx4938_irq_ioc_init(void)
 {
 	int i;
 
-	for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
-	     i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++)
+	for (i = RBTX4938_IRQ_IOC;
+	     i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++)
 		set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
 					 handle_level_irq);
 
-	setup_irq(RBTX4938_IRQ_IOCINT,
-		  &toshiba_rbtx4938_irq_ioc_action);
+	set_irq_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq);
 }
 
 static void
@@ -125,7 +115,7 @@ toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
 	unsigned char v;
 
 	v = readb(rbtx4938_imask_addr);
-	v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	v |= (1 << (irq - RBTX4938_IRQ_IOC));
 	writeb(v, rbtx4938_imask_addr);
 	mmiowb();
 }
@@ -136,15 +126,33 @@ toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
 	unsigned char v;
 
 	v = readb(rbtx4938_imask_addr);
-	v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	v &= ~(1 << (irq - RBTX4938_IRQ_IOC));
 	writeb(v, rbtx4938_imask_addr);
 	mmiowb();
 }
 
-void __init arch_init_irq(void)
+static int rbtx4938_irq_dispatch(int pending)
 {
-	extern void tx4938_irq_init(void);
+	int irq;
+
+	if (pending & STATUSF_IP7)
+		irq = MIPS_CPU_IRQ_BASE + 7;
+	else if (pending & STATUSF_IP2) {
+		irq = txx9_irq();
+		if (irq == RBTX4938_IRQ_IOCINT)
+			irq = toshiba_rbtx4938_irq_nested(irq);
+	} else if (pending & STATUSF_IP1)
+		irq = MIPS_CPU_IRQ_BASE + 0;
+	else if (pending & STATUSF_IP0)
+		irq = MIPS_CPU_IRQ_BASE + 1;
+	else
+		irq = -1;
+	return irq;
+}
 
+void __init rbtx4938_irq_setup(void)
+{
+	txx9_irq_dispatch = rbtx4938_irq_dispatch;
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
 	/* all IRC interrupt mode are Low Active. */
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
new file mode 100644
index 000000000000..ee189519ce5a
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -0,0 +1,25 @@
+/*
+ * rbtx4938 specific prom routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4938.h>
+
+void __init rbtx4938_prom_init(void)
+{
+#ifndef CONFIG_TX4938_NAND_BOOT
+	prom_init_cmdline();
+#endif
+	add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+}
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
new file mode 100644
index 000000000000..6c2b99bb8af6
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -0,0 +1,412 @@
+/*
+ * Setup pointers to hardware-dependent routines.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/console.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4938.h>
+#include <linux/spi/spi.h>
+#include <asm/txx9/spi.h>
+#include <asm/txx9pio.h>
+
+static void rbtx4938_machine_halt(void)
+{
+        printk(KERN_NOTICE "System Halted\n");
+	local_irq_disable();
+
+	while (1)
+		__asm__(".set\tmips3\n\t"
+			"wait\n\t"
+			".set\tmips0");
+}
+
+static void rbtx4938_machine_power_off(void)
+{
+        rbtx4938_machine_halt();
+        /* no return */
+}
+
+static void rbtx4938_machine_restart(char *command)
+{
+	local_irq_disable();
+
+	printk("Rebooting...");
+	writeb(1, rbtx4938_softresetlock_addr);
+	writeb(1, rbtx4938_sfvol_addr);
+	writeb(1, rbtx4938_softreset_addr);
+	while(1)
+		;
+}
+
+static void __init rbtx4938_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+	int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
+		txx9_pci_option =
+			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+			TXX9_PCI_OPT_CLK_66; /* already configured */
+
+	/* Reset PCI Bus */
+	writeb(0, rbtx4938_pcireset_addr);
+	/* Reset PCIC */
+	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_66)
+		tx4938_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	writeb(1, rbtx4938_pcireset_addr);
+	iob();
+
+	tx4938_report_pciclk();
+	tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_AUTO &&
+	    txx9_pci66_check(c, 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(0, rbtx4938_pcireset_addr);
+		/* Reset PCIC */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		tx4938_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		writeb(1, rbtx4938_pcireset_addr);
+		iob();
+		/* Reinitialize PCIC */
+		tx4938_report_pciclk();
+		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	}
+
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) &
+	    (TX4938_PCFG_ETH0_SEL|TX4938_PCFG_ETH1_SEL)) {
+		/* Reset PCIC1 */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+		/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
+		if (!(__raw_readq(&tx4938_ccfgptr->ccfg)
+		      & TX4938_CCFG_PCI1DMD))
+			tx4938_ccfg_set(TX4938_CCFG_PCI1_66);
+		mdelay(10);
+		/* clear PCIC1 reset */
+		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+		tx4938_report_pci1clk();
+
+		/* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */
+		c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000);
+		register_pci_controller(c);
+		tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
+	}
+#endif /* CONFIG_PCI */
+}
+
+/* SPI support */
+
+/* chip select for SPI devices */
+#define	SEEPROM1_CS	7	/* PIO7 */
+#define	SEEPROM2_CS	0	/* IOC */
+#define	SEEPROM3_CS	1	/* IOC */
+#define	SRTC_CS	2	/* IOC */
+
+static int __init rbtx4938_ethaddr_init(void)
+{
+#ifdef CONFIG_PCI
+	unsigned char dat[17];
+	unsigned char sum;
+	int i;
+
+	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
+	if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+		printk(KERN_ERR "seeprom: read error.\n");
+		return -ENODEV;
+	} else {
+		if (strcmp(dat, "MAC") != 0)
+			printk(KERN_WARNING "seeprom: bad signature.\n");
+		for (i = 0, sum = 0; i < sizeof(dat); i++)
+			sum += dat[i];
+		if (sum)
+			printk(KERN_WARNING "seeprom: bad checksum.\n");
+	}
+	for (i = 0; i < 2; i++) {
+		unsigned int id =
+			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
+		struct platform_device *pdev;
+		if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
+		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
+			continue;
+		pdev = platform_device_alloc("tc35815-mac", id);
+		if (!pdev ||
+		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
+		    platform_device_add(pdev))
+			platform_device_put(pdev);
+	}
+#endif /* CONFIG_PCI */
+	return 0;
+}
+
+static void __init rbtx4938_spi_setup(void)
+{
+	/* set SPI_SEL */
+	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL);
+}
+
+static struct resource rbtx4938_fpga_resource;
+
+static void __init rbtx4938_time_init(void)
+{
+	tx4938_time_init(0);
+}
+
+static void __init rbtx4938_mem_setup(void)
+{
+	unsigned long long pcfg;
+	char *argptr;
+
+	if (txx9_master_clock == 0)
+		txx9_master_clock = 25000000; /* 25MHz */
+
+	tx4938_setup();
+
+#ifdef CONFIG_PCI
+	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+#else
+	set_io_port_base(RBTX4938_ETHER_BASE);
+#endif
+
+	tx4938_setup_serial();
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "console=") == NULL) {
+                strcat(argptr, " console=ttyS0,38400");
+        }
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	printk("PIOSEL: disabling both ata and nand selection\n");
+	local_irq_disable();
+	txx9_clear64(&tx4938_ccfgptr->pcfg,
+		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
+	printk("PIOSEL: enabling nand selection\n");
+	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
+	printk("PIOSEL: enabling ata selection\n");
+	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
+#endif
+
+#ifdef CONFIG_IP_PNP
+	argptr = prom_getcmdline();
+	if (strstr(argptr, "ip=") == NULL) {
+		strcat(argptr, " ip=any");
+	}
+#endif
+
+
+#ifdef CONFIG_FB
+	{
+		conswitchp = &dummy_con;
+	}
+#endif
+
+	rbtx4938_spi_setup();
+	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
+	/* fixup piosel */
+	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+	    TX4938_PCFG_ATA_SEL)
+		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04,
+		       rbtx4938_piosel_addr);
+	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+		 TX4938_PCFG_NDF_SEL)
+		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08,
+		       rbtx4938_piosel_addr);
+	else
+		writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04),
+		       rbtx4938_piosel_addr);
+
+	rbtx4938_fpga_resource.name = "FPGA Registers";
+	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
+	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
+	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
+		printk("request resource for fpga failed\n");
+
+	_machine_restart = rbtx4938_machine_restart;
+	_machine_halt = rbtx4938_machine_halt;
+	pm_power_off = rbtx4938_machine_power_off;
+
+	writeb(0xff, rbtx4938_led_addr);
+	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
+	       readb(rbtx4938_fpga_rev_addr),
+	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
+}
+
+static int __init rbtx4938_ne_init(void)
+{
+	struct resource res[] = {
+		{
+			.start	= RBTX4938_RTL_8019_BASE,
+			.end	= RBTX4938_RTL_8019_BASE + 0x20 - 1,
+			.flags	= IORESOURCE_IO,
+		}, {
+			.start	= RBTX4938_RTL_8019_IRQ,
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("ne", -1,
+						res, ARRAY_SIZE(res));
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
+
+static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
+				  int value)
+{
+	u8 val;
+	unsigned long flags;
+	spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
+	val = readb(rbtx4938_spics_addr);
+	if (value)
+		val |= 1 << offset;
+	else
+		val &= ~(1 << offset);
+	writeb(val, rbtx4938_spics_addr);
+	mmiowb();
+	spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
+}
+
+static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	rbtx4938_spi_gpio_set(chip, offset, value);
+	return 0;
+}
+
+static struct gpio_chip rbtx4938_spi_gpio_chip = {
+	.set = rbtx4938_spi_gpio_set,
+	.direction_output = rbtx4938_spi_gpio_dir_out,
+	.label = "RBTX4938-SPICS",
+	.base = 16,
+	.ngpio = 3,
+};
+
+/* SPI support */
+
+static void __init txx9_spi_init(unsigned long base, int irq)
+{
+	struct resource res[] = {
+		{
+			.start	= base,
+			.end	= base + 0x20 - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= irq,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+	platform_device_register_simple("spi_txx9", 0,
+					res, ARRAY_SIZE(res));
+}
+
+static int __init rbtx4938_spi_init(void)
+{
+	struct spi_board_info srtc_info = {
+		.modalias = "rtc-rs5c348",
+		.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
+		.bus_num = 0,
+		.chip_select = 16 + SRTC_CS,
+		/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS  */
+		.mode = SPI_MODE_1 | SPI_CS_HIGH,
+	};
+	spi_register_board_info(&srtc_info, 1);
+	spi_eeprom_register(SEEPROM1_CS);
+	spi_eeprom_register(16 + SEEPROM2_CS);
+	spi_eeprom_register(16 + SEEPROM3_CS);
+	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
+	gpio_direction_output(16 + SRTC_CS, 0);
+	gpio_request(SEEPROM1_CS, "seeprom1");
+	gpio_direction_output(SEEPROM1_CS, 1);
+	gpio_request(16 + SEEPROM2_CS, "seeprom2");
+	gpio_direction_output(16 + SEEPROM2_CS, 1);
+	gpio_request(16 + SEEPROM3_CS, "seeprom3");
+	gpio_direction_output(16 + SEEPROM3_CS, 1);
+	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+	return 0;
+}
+
+static void __init rbtx4938_arch_init(void)
+{
+	gpiochip_add(&rbtx4938_spi_gpio_chip);
+	rbtx4938_pci_setup();
+	rbtx4938_spi_init();
+}
+
+/* Watchdog support */
+
+static int __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("txx9wdt", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static int __init rbtx4938_wdt_init(void)
+{
+	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static void __init rbtx4938_device_init(void)
+{
+	rbtx4938_ethaddr_init();
+	rbtx4938_ne_init();
+	rbtx4938_wdt_init();
+}
+
+struct txx9_board_vec rbtx4938_vec __initdata = {
+	.system = "Toshiba RBTX4938",
+	.prom_init = rbtx4938_prom_init,
+	.mem_setup = rbtx4938_mem_setup,
+	.irq_setup = rbtx4938_irq_setup,
+	.time_init = rbtx4938_time_init,
+	.device_init = rbtx4938_device_init,
+	.arch_init = rbtx4938_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = rbtx4938_pci_map_irq,
+#endif
+};
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c
index 4d6b4ade5e8c..a7ea8b041c1d 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
+++ b/arch/mips/txx9/rbtx4938/spi_eeprom.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
+ * spi_eeprom.c
  * Copyright (C) 2000-2001 Toshiba Corporation
  *
  * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
-#include <asm/tx4938/spi.h>
+#include <asm/txx9/spi.h>
 
 #define AT250X0_PAGE_SIZE	8
 
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 559acc09c819..c1be6b37fb2a 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -23,16 +23,6 @@ config IBM_WORKPAD
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config NEC_CMBVR4133
-	bool "NEC CMB-VR4133"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select HW_HAS_PCI
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config TANBAC_TB022X
 	bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
 	select CEVT_R4K
@@ -73,13 +63,6 @@ config ZAO_CAPCELLA
 
 endchoice
 
-config ROCKHOPPER
-	bool "Support for Rockhopper base board"
-	depends on NEC_CMBVR4133
-	select PCI_VR41XX
-	select I8259
-	select HAVE_STD_PC_SERIAL_PORT
-
 choice
 	prompt "Base board type"
 	depends on TANBAC_TB022X
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/Makefile b/arch/mips/vr41xx/nec-cmbvr4133/Makefile
deleted file mode 100644
index 5835cae54aca..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the NEC-CMBVR4133
-#
-
-obj-y				:= init.o setup.o
-
-obj-$(CONFIG_PCI)		+= m1535plus.o
-obj-$(CONFIG_ROCKHOPPER)	+= irq.o
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/init.c b/arch/mips/vr41xx/nec-cmbvr4133/init.c
deleted file mode 100644
index 7c5e18ee2231..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/init.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/init.c
- *
- * PROM library initialisation code for NEC CMB-VR4133 board.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Jun Sun <jsun@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for NEC-CMBVR4133 in 2.6
- * Manish Lachwani (mlachwani@mvista.com)
- */
-
-#ifdef CONFIG_ROCKHOPPER
-#include <asm/io.h>
-#include <linux/pci.h>
-
-#define PCICONFDREG	0xaf000c14
-#define PCICONFAREG	0xaf000c18
-
-void disable_pcnet(void)
-{
-	u32 data;
-
-	/*
-	 * Workaround for the bug in PMON on VR4133. PMON leaves
-	 * AMD PCNet controller (on Rockhopper) initialized and running in
-	 * bus master mode. We have do disable it before doing any
-	 * further initialization. Or we get problems with PCI bus 2
-	 * and random lockups and crashes.
-	 */
-
-	writel((2 << 16)		|
-	       (PCI_DEVFN(1, 0) << 8)	|
-	       (0 & 0xfc)		|
-               1UL,
-	       PCICONFAREG);
-
-	data = readl(PCICONFDREG);
-
-	writel((2 << 16)		|
-	       (PCI_DEVFN(1, 0) << 8)	|
-	       (4 & 0xfc)		|
-               1UL,
-	       PCICONFAREG);
-
-	data = readl(PCICONFDREG);
-
-	writel((2 << 16)		|
-	       (PCI_DEVFN(1, 0) << 8)	|
-	       (4 & 0xfc)		|
-               1UL,
-	       PCICONFAREG);
-
-	data &= ~4;
-
-	writel(data, PCICONFDREG);
-}
-#endif
-
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/irq.c b/arch/mips/vr41xx/nec-cmbvr4133/irq.c
deleted file mode 100644
index 7d2d076b0f54..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/irq.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/irq.c
- *
- * Interrupt routines for the NEC CMB-VR4133 board.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for NEC-CMBVR4133 in 2.6
- * Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/vr41xx/cmbvr4133.h>
-
-extern int vr4133_rockhopper;
-
-static int i8259_get_irq_number(int irq)
-{
-	return i8259_irq();
-}
-
-void __init rockhopper_init_irq(void)
-{
-	int i;
-
-	if(!vr4133_rockhopper) {
-		printk(KERN_ERR "Not a Rockhopper Board \n");
-		return;
-	}
-
-	vr41xx_set_irq_trigger(CMBVR41XX_INTC_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH);
-	vr41xx_set_irq_level(CMBVR41XX_INTC_PIN, LEVEL_HIGH);
-	vr41xx_cascade_irq(CMBVR41XX_INTC_IRQ, i8259_get_irq_number);
-}
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c b/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
deleted file mode 100644
index 1341f3287d04..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
- *
- * Initialize for ALi M1535+(included M5229 and M5237).
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for NEC-CMBVR4133 in 2.6
- * Author: Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/serial.h>
-
-#include <asm/vr41xx/cmbvr4133.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-
-#define CONFIG_PORT(port)	((port) ? 0x3f0 : 0x370)
-#define DATA_PORT(port)		((port) ? 0x3f1 : 0x371)
-#define INDEX_PORT(port)	CONFIG_PORT(port)
-
-#define ENTER_CONFIG_MODE(port)				\
-	do {						\
-		outb_p(0x51, CONFIG_PORT(port));	\
-		outb_p(0x23, CONFIG_PORT(port));	\
-	} while(0)
-
-#define SELECT_LOGICAL_DEVICE(port, dev_no)		\
-	do {						\
-		outb_p(0x07, INDEX_PORT(port));		\
-		outb_p((dev_no), DATA_PORT(port));	\
-	} while(0)
-
-#define WRITE_CONFIG_DATA(port, index, data)		\
-	do {						\
-		outb_p((index), INDEX_PORT(port));	\
-		outb_p((data), DATA_PORT(port));	\
-	} while(0)
-
-#define EXIT_CONFIG_MODE(port)	outb(0xbb, CONFIG_PORT(port))
-
-#define PCI_CONFIG_ADDR	KSEG1ADDR(0x0f000c18)
-#define PCI_CONFIG_DATA	KSEG1ADDR(0x0f000c14)
-
-#ifdef CONFIG_BLK_DEV_FD
-
-void __devinit ali_m1535plus_fdc_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 0);		/* FDC */
-	WRITE_CONFIG_DATA(port, 0x30, 0x01);	/* FDC: enable */
-	WRITE_CONFIG_DATA(port, 0x60, 0x03);	/* I/O port base: 0x3f0 */
-	WRITE_CONFIG_DATA(port, 0x61, 0xf0);
-	WRITE_CONFIG_DATA(port, 0x70, 0x06);	/* IRQ: 6 */
-	WRITE_CONFIG_DATA(port, 0x74, 0x02);	/* DMA: channel 2 */
-	WRITE_CONFIG_DATA(port, 0xf0, 0x08);
-	WRITE_CONFIG_DATA(port, 0xf1, 0x00);
-	WRITE_CONFIG_DATA(port, 0xf2, 0xff);
-	WRITE_CONFIG_DATA(port, 0xf4, 0x00);
-	EXIT_CONFIG_MODE(port);
-}
-
-#endif
-
-void __devinit ali_m1535plus_parport_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 3);		/* Parallel Port */
-	WRITE_CONFIG_DATA(port, 0x30, 0x01);
-	WRITE_CONFIG_DATA(port, 0x60, 0x03);	/* I/O port base: 0x378 */
-	WRITE_CONFIG_DATA(port, 0x61, 0x78);
-	WRITE_CONFIG_DATA(port, 0x70, 0x07);	/* IRQ: 7 */
-	WRITE_CONFIG_DATA(port, 0x74, 0x04);	/* DMA: None */
-	WRITE_CONFIG_DATA(port, 0xf0, 0x8c);	/* IRQ polarity: Active Low */
-	WRITE_CONFIG_DATA(port, 0xf1, 0xc5);
-	EXIT_CONFIG_MODE(port);
-}
-
-void __devinit ali_m1535plus_keyboard_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 7);		/* KEYBOARD */
-	WRITE_CONFIG_DATA(port, 0x30, 0x01);	/* KEYBOARD: eable */
-	WRITE_CONFIG_DATA(port, 0x70, 0x01);	/* IRQ: 1 */
-	WRITE_CONFIG_DATA(port, 0x72, 0x0c);	/* PS/2 Mouse IRQ: 12 */
-	WRITE_CONFIG_DATA(port, 0xf0, 0x00);
-	EXIT_CONFIG_MODE(port);
-}
-
-void __devinit ali_m1535plus_hotkey_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 0xc);	/* HOTKEY */
-	WRITE_CONFIG_DATA(port, 0x30, 0x00);
-	WRITE_CONFIG_DATA(port, 0xf0, 0x35);
-	WRITE_CONFIG_DATA(port, 0xf1, 0x14);
-	WRITE_CONFIG_DATA(port, 0xf2, 0x11);
-	WRITE_CONFIG_DATA(port, 0xf3, 0x71);
-	WRITE_CONFIG_DATA(port, 0xf5, 0x05);
-	EXIT_CONFIG_MODE(port);
-}
-
-void ali_m1535plus_init(struct pci_dev *dev)
-{
-	pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */
-	pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */
-	pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */
-	pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */
-	pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */
-	pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */
-	pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */
-
-	/* IRQ routing */
-	pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */
-	pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */
-	pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */
-	pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */
-
-	pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */
-	pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */
-	pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */
-	pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */
-
-	pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */
-	pci_write_config_byte(dev, 0x5a, 0x00);
-	pci_write_config_byte(dev, 0x5b, 0x00);
-	pci_write_config_word(dev, 0x5c, 0x0000);
-	pci_write_config_byte(dev, 0x5e, 0x00);
-	pci_write_config_byte(dev, 0x5f, 0x00);
-	pci_write_config_word(dev, 0x60, 0x0000);
-
-	pci_write_config_byte(dev, 0x6c, 0x00);
-	pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */
-	pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */
-
-	pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */
-	pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */
-	pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */
-	pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */
-
-	/*
-	 * IRQ setup ALi M5237 USB Host Controller
-	 * IRQ: 9
-	 */
-	pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */
-
-	pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15  */
-	pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */
-	pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */
-	pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */
-	pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */
-	pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */
-	pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */
-	pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */
-
-#ifdef CONFIG_BLK_DEV_FD
-	ali_m1535plus_fdc_init(1);
-#endif
-
-	ali_m1535plus_keyboard_init(1);
-	ali_m1535plus_hotkey_init(1);
-}
-
-static inline void ali_config_writeb(u8 reg, u8 val, int devfn)
-{
-	u32 data;
-	int shift;
-
-	writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
-        data = readl(PCI_CONFIG_DATA);
-
-	shift = (reg & 3) << 3;
-	data &= ~(0xff << shift);
-	data |= (((u32)val) << shift);
-
-	writel(data, PCI_CONFIG_DATA);
-}
-
-static inline u8 ali_config_readb(u8 reg, int devfn)
-{
-	u32 data;
-
-	writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
-	data = readl(PCI_CONFIG_DATA);
-
-	return (u8)(data >> ((reg & 3) << 3));
-}
-
-static inline u16 ali_config_readw(u8 reg, int devfn)
-{
-	u32 data;
-
-	writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
-	data = readl(PCI_CONFIG_DATA);
-
-	return (u16)(data >> ((reg & 2) << 3));
-}
-
-int vr4133_rockhopper = 0;
-void __init ali_m5229_preinit(void)
-{
-	if (ali_config_readw(PCI_VENDOR_ID, 16) == PCI_VENDOR_ID_AL &&
-	    ali_config_readw(PCI_DEVICE_ID, 16) == PCI_DEVICE_ID_AL_M1533) {
-		printk(KERN_INFO "Found an NEC Rockhopper \n");
-		vr4133_rockhopper = 1;
-		/*
-		 * Enable ALi M5229 IDE Controller (both channels)
-		 * IDSEL: A27
-		 */
-		ali_config_writeb(0x58, 0x4c, 16);
-	}
-}
-
-void __init ali_m5229_init(struct pci_dev *dev)
-{
-	/*
-	 * Enable Primary/Secondary Channel Cable Detect 40-Pin
-	 */
-	pci_write_config_word(dev, 0x4a, 0xc023);
-
-	/*
-	 * Set only the 3rd byteis for the master IDE's cycle and
-	 * enable Internal IDE Function
-	 */
-	pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */
-
-	pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */
-	pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */
-	pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */
-	pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */
-	pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */
-	pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */
-	pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */
-	pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */
-	pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */
-	pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
-	pci_write_config_word(dev, PCI_COMMAND,
-	                           PCI_COMMAND_PARITY | PCI_COMMAND_MASTER |
-				   PCI_COMMAND_IO);
-}
-
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
deleted file mode 100644
index 7723d2011b08..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/setup.c
- *
- * Setup for the NEC CMB-VR4133.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for CMBVR4133 board in 2.6
- * Author: Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/vr41xx/cmbvr4133.h>
-#include <asm/bootinfo.h>
-
-#ifdef CONFIG_MTD
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-static struct mtd_partition cmbvr4133_mtd_parts[] = {
-	{
-		.name =		"User FS",
-		.size =		0x1be0000,
-		.offset =	0,
-		.mask_flags = 	0,
-	},
-	{
-		.name =		"PMON",
-		.size =		0x140000,
-		.offset =	MTDPART_OFS_APPEND,
-		.mask_flags =	MTD_WRITEABLE,  /* force read-only */
-	},
-	{
-		.name =		"User FS2",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	MTDPART_OFS_APPEND,
-		.mask_flags = 	0,
-	}
-};
-
-#define number_partitions ARRAY_SIZE(cmbvr4133_mtd_parts)
-#endif
-
-extern void i8259_init(void);
-
-static void __init nec_cmbvr4133_setup(void)
-{
-#ifdef CONFIG_ROCKHOPPER
-	extern void disable_pcnet(void);
-
-	disable_pcnet();
-#endif
-	set_io_port_base(KSEG1ADDR(0x16000000));
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_ROCKHOPPER
-	ali_m5229_preinit();
-#endif
-#endif
-
-#ifdef CONFIG_ROCKHOPPER
-	rockhopper_init_irq();
-#endif
-
-#ifdef CONFIG_MTD
-	/* we use generic physmap mapping driver and we use partitions */
-	physmap_configure(0x1C000000, 0x02000000, 4, NULL);
-	physmap_set_partitions(cmbvr4133_mtd_parts, number_partitions);
-#endif
-
-	/* 128 MB memory support */
-	add_memory_region(0, 0x08000000, BOOT_MEM_RAM);
-
-#ifdef CONFIG_ROCKHOPPER
-	i8259_init();
-#endif
-}
diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c
index ded207efc97a..f673383518e4 100644
--- a/arch/mn10300/boot/compressed/misc.c
+++ b/arch/mn10300/boot/compressed/misc.c
@@ -153,26 +153,9 @@ static uch *output_data;
 static unsigned long output_ptr;
 
 
-static void *malloc(int size);
-
-static inline void free(void *where)
-{	/* Don't care */
-}
-
 static unsigned long free_mem_ptr = (unsigned long) &end;
 static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
 
-static inline void gzip_mark(void **ptr)
-{
-	kputs(".");
-	*ptr = (void *) free_mem_ptr;
-}
-
-static inline void gzip_release(void **ptr)
-{
-	free_mem_ptr = (unsigned long) *ptr;
-}
-
 #define INPLACE_MOVE_ROUTINE	0x1000
 #define LOW_BUFFER_START	0x2000
 #define LOW_BUFFER_END		0x90000
@@ -186,26 +169,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (!free_mem_ptr)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
 static inline void scroll(void)
 {
 	int i;
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 21891c71d549..54be6afb5555 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -163,8 +163,6 @@ static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 static char	trans_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 struct gdbstub_bkpt {
 	u8	*addr;		/* address of breakpoint */
 	u8	len;		/* size of breakpoint */
@@ -363,8 +361,8 @@ static int putpacket(char *buffer)
 		}
 
 		gdbstub_io_tx_char('#');
-		gdbstub_io_tx_char(hexchars[checksum >> 4]);
-		gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_io_tx_char(hex_asc_hi(checksum));
+		gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_io_rx_char(&ch, 0),
 		 ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
@@ -822,8 +820,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 1 && count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -831,10 +828,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 3 && count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -842,14 +837,10 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	while (count >= 4) {
 		if (gdbstub_read_dword(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -857,10 +848,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -868,8 +857,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1304,14 +1292,14 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
 
-		hx = hexchars[(excep & 0xf000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x0f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x00f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(excep);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1322,22 +1310,22 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
 
-		hx = hexchars[(bcberr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1353,14 +1341,12 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send trap type (converted to signal)
 	 */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/*
 	 * Send Error PC
 	 */
-	*ptr++ = hexchars[GDB_REGID_PC >> 4];
-	*ptr++ = hexchars[GDB_REGID_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1368,8 +1354,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REGID_FP >> 4];
-	*ptr++ = hexchars[GDB_REGID_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->a3, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1378,8 +1363,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send stack pointer
 	 */
 	ssp = (unsigned long) (regs + 1);
-	*ptr++ = hexchars[GDB_REGID_SP >> 4];
-	*ptr++ = hexchars[GDB_REGID_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&ssp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1399,8 +1383,8 @@ packet_waiting:
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -1838,8 +1822,8 @@ void gdbstub_exit(int status)
 
 	gdbstub_busy = 1;
 	output_buffer[0] = 'W';
-	output_buffer[1] = hexchars[(status >> 4) & 0x0F];
-	output_buffer[2] = hexchars[status & 0x0F];
+	output_buffer[1] = hex_asc_hi(status);
+	output_buffer[2] = hex_asc_lo(status);
 	output_buffer[3] = 0;
 
 	gdbstub_io_tx_char('$');
@@ -1853,8 +1837,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_io_tx_char('#');
-	gdbstub_io_tx_char(hexchars[checksum >> 4]);
-	gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_io_tx_char(hex_asc_hi(checksum));
+	gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_io_tx_flush();
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index b9c268c6b2fb..8b054e7a8ae8 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -392,7 +392,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
 static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 {
 	struct uart_icount *icount = &port->uart.icount;
-	struct tty_struct *tty = port->uart.info->tty;
+	struct tty_struct *tty = port->uart.info->port.tty;
 	unsigned ix;
 	int count;
 	u8 st, ch, push, status, overrun;
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
index 8c5d88c7b90a..8cee387a24fd 100644
--- a/arch/mn10300/mm/init.c
+++ b/arch/mn10300/mm/init.c
@@ -67,8 +67,8 @@ void __init paging_init(void)
 
 	/* declare the sizes of the RAM zones (only use the normal zone) */
 	zones_size[ZONE_NORMAL] =
-		(contig_page_data.bdata->node_low_pfn) -
-		(contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+		contig_page_data.bdata->node_low_pfn -
+		contig_page_data.bdata->node_min_pfn;
 
 	/* pass the memory from the bootmem allocator to the main allocator */
 	free_area_init(zones_size);
@@ -87,7 +87,7 @@ void __init mem_init(void)
 	if (!mem_map)
 		BUG();
 
-#define START_PFN	(contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN	(contig_page_data.bdata->node_min_pfn)
 #define MAX_LOW_PFN	(contig_page_data.bdata->node_low_pfn)
 
 	max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
index a477038752ba..baffc581e031 100644
--- a/arch/mn10300/mm/pgtable.c
+++ b/arch/mn10300/mm/pgtable.c
@@ -27,33 +27,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * Associate a large virtual page frame with a given physical page frame
  * and protection flags for that frame. pfn is for the base of the page,
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index bc7a19da6245..a7d4fd353c2b 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -199,6 +199,7 @@ endchoice
 
 config SMP
 	bool "Symmetric multi-processing support"
+	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 0c5b9dabb475..be255ebb609c 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -448,7 +448,7 @@ int hpux_pipe(int *kstack_fildes)
 	int error;
 
 	lock_kernel();
-	error = do_pipe(kstack_fildes);
+	error = do_pipe_flags(kstack_fildes, 0);
 	unlock_kernel();
 	return error;
 }
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index e10d25d2d9c9..5259d8c20676 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -51,12 +51,12 @@ static struct pdc_btlb_info btlb_info __read_mostly;
 void
 flush_data_cache(void)
 {
-	on_each_cpu(flush_data_cache_local, NULL, 1, 1);
+	on_each_cpu(flush_data_cache_local, NULL, 1);
 }
 void 
 flush_instruction_cache(void)
 {
-	on_each_cpu(flush_instruction_cache_local, NULL, 1, 1);
+	on_each_cpu(flush_instruction_cache_local, NULL, 1);
 }
 #endif
 
@@ -515,7 +515,7 @@ static void cacheflush_h_tmp_function(void *dummy)
 
 void flush_cache_all(void)
 {
-	on_each_cpu(cacheflush_h_tmp_function, NULL, 1, 1);
+	on_each_cpu(cacheflush_h_tmp_function, NULL, 1);
 }
 
 void flush_cache_mm(struct mm_struct *mm)
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index 89d6d5ad44b5..f696f57faa15 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -46,6 +46,7 @@
 #include <linux/init.h>
 #include <linux/proc_fs.h>
 #include <linux/miscdevice.h>
+#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 
 #include <asm/uaccess.h>
@@ -260,13 +261,16 @@ printk("Preparing to start counters\n");
  */
 static int perf_open(struct inode *inode, struct file *file)
 {
+	lock_kernel();
 	spin_lock(&perf_lock);
 	if (perf_enabled) {
 		spin_unlock(&perf_lock);
+		unlock_kernel();
 		return -EBUSY;
 	}
 	perf_enabled = 1;
  	spin_unlock(&perf_lock);
+	unlock_kernel();
 
 	return 0;
 }
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 85fc7754ec25..d47f3975c9c6 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -84,19 +84,11 @@ EXPORT_SYMBOL(cpu_possible_map);
 
 DEFINE_PER_CPU(spinlock_t, ipi_lock) = SPIN_LOCK_UNLOCKED;
 
-struct smp_call_struct {
-	void (*func) (void *info);
-	void *info;
-	long wait;
-	atomic_t unstarted_count;
-	atomic_t unfinished_count;
-};
-static volatile struct smp_call_struct *smp_call_function_data;
-
 enum ipi_message_type {
 	IPI_NOP=0,
 	IPI_RESCHEDULE=1,
 	IPI_CALL_FUNC,
+	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_START,
 	IPI_CPU_STOP,
 	IPI_CPU_TEST
@@ -187,33 +179,12 @@ ipi_interrupt(int irq, void *dev_id)
 
 			case IPI_CALL_FUNC:
 				smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC\n", this_cpu);
-				{
-					volatile struct smp_call_struct *data;
-					void (*func)(void *info);
-					void *info;
-					int wait;
-
-					data = smp_call_function_data;
-					func = data->func;
-					info = data->info;
-					wait = data->wait;
-
-					mb();
-					atomic_dec ((atomic_t *)&data->unstarted_count);
-
-					/* At this point, *data can't
-					 * be relied upon.
-					 */
-
-					(*func)(info);
-
-					/* Notify the sending CPU that the
-					 * task is done.
-					 */
-					mb();
-					if (wait)
-						atomic_dec ((atomic_t *)&data->unfinished_count);
-				}
+				generic_smp_call_function_interrupt();
+				break;
+
+			case IPI_CALL_FUNC_SINGLE:
+				smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC_SINGLE\n", this_cpu);
+				generic_smp_call_function_single_interrupt();
 				break;
 
 			case IPI_CPU_START:
@@ -256,6 +227,14 @@ ipi_send(int cpu, enum ipi_message_type op)
 	spin_unlock_irqrestore(lock, flags);
 }
 
+static void
+send_IPI_mask(cpumask_t mask, enum ipi_message_type op)
+{
+	int cpu;
+
+	for_each_cpu_mask(cpu, mask)
+		ipi_send(cpu, op);
+}
 
 static inline void
 send_IPI_single(int dest_cpu, enum ipi_message_type op)
@@ -295,86 +274,15 @@ smp_send_all_nop(void)
 	send_IPI_allbutself(IPI_NOP);
 }
 
-
-/**
- * Run a function on all other CPUs.
- *  <func>	The function to run. This must be fast and non-blocking.
- *  <info>	An arbitrary pointer to pass to the function.
- *  <retry>	If true, keep retrying until ready.
- *  <wait>	If true, wait until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until remote CPUs are nearly ready to execute <func>
- * or have executed.
- */
-
-int
-smp_call_function (void (*func) (void *info), void *info, int retry, int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct smp_call_struct data;
-	unsigned long timeout;
-	static DEFINE_SPINLOCK(lock);
-	int retries = 0;
-
-	if (num_online_cpus() < 2)
-		return 0;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	/* can also deadlock if IPIs are disabled */
-	WARN_ON((get_eiem() & (1UL<<(CPU_IRQ_MAX - IPI_IRQ))) == 0);
-
-	
-	data.func = func;
-	data.info = info;
-	data.wait = wait;
-	atomic_set(&data.unstarted_count, num_online_cpus() - 1);
-	atomic_set(&data.unfinished_count, num_online_cpus() - 1);
-
-	if (retry) {
-		spin_lock (&lock);
-		while (smp_call_function_data != 0)
-			barrier();
-	}
-	else {
-		spin_lock (&lock);
-		if (smp_call_function_data) {
-			spin_unlock (&lock);
-			return -EBUSY;
-		}
-	}
-
-	smp_call_function_data = &data;
-	spin_unlock (&lock);
-	
-	/*  Send a message to all other CPUs and wait for them to respond  */
-	send_IPI_allbutself(IPI_CALL_FUNC);
-
- retry:
-	/*  Wait for response  */
-	timeout = jiffies + HZ;
-	while ( (atomic_read (&data.unstarted_count) > 0) &&
-		time_before (jiffies, timeout) )
-		barrier ();
-
-	if (atomic_read (&data.unstarted_count) > 0) {
-		printk(KERN_CRIT "SMP CALL FUNCTION TIMED OUT! (cpu=%d), try %d\n",
-		      smp_processor_id(), ++retries);
-		goto retry;
-	}
-	/* We either got one or timed out. Release the lock */
-
-	mb();
-	smp_call_function_data = NULL;
-
-	while (wait && atomic_read (&data.unfinished_count) > 0)
-			barrier ();
-
-	return 0;
+	send_IPI_mask(mask, IPI_CALL_FUNC);
 }
 
-EXPORT_SYMBOL(smp_call_function);
+void arch_send_call_function_single_ipi(int cpu)
+{
+	send_IPI_single(cpu, IPI_CALL_FUNC_SINGLE);
+}
 
 /*
  * Flush all other CPU's tlb and then mine.  Do this with on_each_cpu()
@@ -384,7 +292,7 @@ EXPORT_SYMBOL(smp_call_function);
 void
 smp_flush_tlb_all(void)
 {
-	on_each_cpu(flush_tlb_all_local, NULL, 1, 1);
+	on_each_cpu(flush_tlb_all_local, NULL, 1);
 }
 
 /*
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 2e516b871752..1a3b6ccd3620 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -67,7 +67,6 @@ SECTIONS
 	_etext = .;
 
 	RODATA
-	BUG_TABLE
 
 	/* writeable */
 	/* Make sure this is page aligned so
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index ce0da689a89d..7c155c254e72 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -36,7 +36,6 @@ extern int  data_start;
 
 #ifdef CONFIG_DISCONTIGMEM
 struct node_map_data node_data[MAX_NUMNODES] __read_mostly;
-bootmem_data_t bmem_data[MAX_NUMNODES] __read_mostly;
 unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
 #endif
 
@@ -262,7 +261,7 @@ static void __init setup_bootmem(void)
 #ifdef CONFIG_DISCONTIGMEM
 	for (i = 0; i < MAX_PHYSMEM_RANGES; i++) {
 		memset(NODE_DATA(i), 0, sizeof(pg_data_t));
-		NODE_DATA(i)->bdata = &bmem_data[i];
+		NODE_DATA(i)->bdata = &bootmem_node_data[i];
 	}
 	memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
@@ -888,7 +887,7 @@ void __init paging_init(void)
 		}
 #endif
 
-		free_area_init_node(i, NODE_DATA(i), zones_size,
+		free_area_init_node(i, zones_size,
 				pmem_ranges[i].start_pfn, NULL);
 	}
 }
@@ -1053,7 +1052,7 @@ void flush_tlb_all(void)
 	    do_recycle++;
 	}
 	spin_unlock(&sid_lock);
-	on_each_cpu(flush_tlb_all_local, NULL, 1, 1);
+	on_each_cpu(flush_tlb_all_local, NULL, 1);
 	if (do_recycle) {
 	    spin_lock(&sid_lock);
 	    recycle_sids(recycle_ndirty,recycle_dirty_array);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 3934e2659407..fe88418167c5 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -53,6 +53,9 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 	depends on PPC64
@@ -105,11 +108,19 @@ config ARCH_NO_VIRT_TO_BUS
 config PPC
 	bool
 	default y
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_IDE
-	select HAVE_OPROFILE
+	select HAVE_IOREMAP_PROT
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_KPROBES
+	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
 	select HAVE_LMB
+	select HAVE_DMA_ATTRS if PPC64
+	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_OPROFILE
 
 config EARLY_PRINTK
 	bool
@@ -192,7 +203,7 @@ config ARCH_HIBERNATION_POSSIBLE
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
 
 config PPC_DCR_NATIVE
 	bool
@@ -308,8 +319,8 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "Build a kdump crash kernel (EXPERIMENTAL)"
-	depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL
+	bool "Build a kdump crash kernel"
+	depends on PPC_MULTIPLATFORM && PPC64
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The kernel will be linked at a different address than normal, and
@@ -458,6 +469,19 @@ config CMDLINE
 	  some command-line options at build time by entering them here.  In
 	  most cases you will need to specify the root device here.
 
+config EXTRA_TARGETS
+	string "Additional default image types"
+	help
+	  List additional targets to be built by the bootwrapper here (separated
+	  by spaces).  This is useful for targets that depend of device tree
+	  files in the .dts directory.
+
+	  Targets in this list will be build as part of the default build
+	  target, or when the user does a 'make zImage' or a
+	  'make zImage.initrd'.
+
+	  If unsure, leave blank
+
 if !44x || BROKEN
 config ARCH_WANTS_FREEZER_CONTROL
 	def_bool y
@@ -538,15 +562,25 @@ config FSL_LBC
 	help
 	  Freescale Localbus support
 
+config FSL_GTM
+	bool
+	depends on PPC_83xx || QUICC_ENGINE || CPM2
+	help
+	  Freescale General-purpose Timers support
+
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool
 
+# Platforms that what PCI turned unconditionally just do select PCI
+# in their config node.  Platforms that want to choose at config
+# time should select PPC_PCI_CHOICE
+config PPC_PCI_CHOICE
+	bool
+
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
-		|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
-		|| PPC_PS3 || 44x
-	default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \
+	bool "PCI support" if PPC_PCI_CHOICE
+	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
 		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
@@ -812,6 +846,7 @@ source "crypto/Kconfig"
 config PPC_CLOCK
 	bool
 	default n
+	select HAVE_CLK
 
 config PPC_LIB_RHEAP
 	bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index a7d24e692bab..8c8aadbe9563 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -41,52 +41,19 @@ config HCALL_STATS
 	  This option will add a small amount of overhead to all hypervisor
 	  calls.
 
-config DEBUGGER
-	bool "Enable debugger hooks"
+config CODE_PATCHING_SELFTEST
+	bool "Run self-tests of the code-patching code."
 	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel hooks for kernel debuggers. Unless you are
-	  intending to debug the kernel, say N here.
-
-config KGDB
-	bool "Include kgdb kernel debugger"
-	depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
-	select DEBUG_INFO
-	help
-	  Include in-kernel hooks for kgdb, the Linux kernel source level
-	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
-	  Unless you are intending to debug the kernel, say N here.
-
-choice
-	prompt "Serial Port"
-	depends on KGDB
-	default KGDB_TTYS1
-
-config KGDB_TTYS0
-	bool "ttyS0"
-
-config KGDB_TTYS1
-	bool "ttyS1"
-
-config KGDB_TTYS2
-	bool "ttyS2"
+	default n
 
-config KGDB_TTYS3
-	bool "ttyS3"
-
-endchoice
-
-config KGDB_CONSOLE
-	bool "Enable serial console thru kgdb port"
-	depends on KGDB && 8xx || CPM2
-	help
-	  If you enable this, all serial console messages will be sent
-	  over the gdb stub.
-	  If unsure, say N.
+config FTR_FIXUP_SELFTEST
+	bool "Run self-tests of the feature-fixup code."
+	depends on DEBUG_KERNEL
+	default n
 
 config XMON
 	bool "Include xmon kernel debugger"
-	depends on DEBUGGER
+	depends on DEBUG_KERNEL
 	help
 	  Include in-kernel hooks for the xmon kernel monitor/debugger.
 	  Unless you are intending to debug the kernel, say N here.
@@ -116,6 +83,11 @@ config XMON_DISASSEMBLY
 	  to say Y here, unless you're building for a memory-constrained
 	  system.
 
+config DEBUGGER
+	bool
+	depends on KGDB || XMON
+	default y
+
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	help
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index b7d4c4ce2fe6..9155c9312c1e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -18,22 +18,16 @@ HAS_BIARCH	:= $(call cc-option-yn, -m32)
 CROSS32_COMPILE ?=
 
 CROSS32CC		:= $(CROSS32_COMPILE)gcc
-CROSS32AS		:= $(CROSS32_COMPILE)as
-CROSS32LD		:= $(CROSS32_COMPILE)ld
 CROSS32AR		:= $(CROSS32_COMPILE)ar
-CROSS32OBJCOPY		:= $(CROSS32_COMPILE)objcopy
 
 ifeq ($(HAS_BIARCH),y)
 ifeq ($(CROSS32_COMPILE),)
 CROSS32CC	:= $(CC) -m32
-CROSS32AS	:= $(AS) -a32
-CROSS32LD	:= $(LD) -m elf32ppc
-CROSS32OBJCOPY	:= $(OBJCOPY)
 CROSS32AR	:= GNUTARGET=elf32-powerpc $(AR)
 endif
 endif
 
-export CROSS32CC CROSS32AS CROSS32LD CROSS32AR CROSS32OBJCOPY
+export CROSS32CC CROSS32AR
 
 ifeq ($(CROSS_COMPILE),)
 KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
@@ -169,12 +163,25 @@ bootwrapper_install %.dtb:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 define archhelp
-  @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
+  @echo '* zImage          - Build default images selected by kernel config'
+  @echo '  zImage.*        - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
+  @echo '  uImage          - U-Boot native image format'
+  @echo '  cuImage.<dt>    - Backwards compatible U-Boot image for older'
+  @echo '                    versions which do not support device trees'
+  @echo '  dtbImage.<dt>   - zImage with an embedded device tree blob'
+  @echo '  simpleImage.<dt> - Firmware independent image.'
+  @echo '  treeImage.<dt>  - Support for older IBM 4xx firmware (not U-Boot)'
   @echo '  install         - Install kernel using'
   @echo '                    (your) ~/bin/installkernel or'
   @echo '                    (distribution) /sbin/installkernel or'
   @echo '                    install to $$(INSTALL_PATH) and run lilo'
   @echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
+  @echo ''
+  @echo '  Targets with <dt> embed a device tree blob inside the image'
+  @echo '  These targets support board with firmware that does not'
+  @echo '  support passing a device tree directly.  Replace <dt> with the'
+  @echo '  name of a dts file from the arch/$(ARCH)/boot/dts/ directory'
+  @echo '  (minus the .dts extension).'
 endef
 
 install:
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 095e04db1c0e..14174aa24074 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -35,6 +35,8 @@ endif
 
 BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
 
+DTS_FLAGS	?= -p 1024
+
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
@@ -63,10 +65,10 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
-		fixed-head.S ep88xc.c ep405.c \
+		fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
-		virtex405-head.S
+		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -161,12 +163,12 @@ quiet_cmd_flex = FLEX    $@
       cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
 
 $(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
-     $(call if_changed,bison)
+	$(call if_changed,bison)
 
 $(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
 
 $(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
-     $(call if_changed,flex)
+	$(call if_changed,flex)
 endif
 
 #############
@@ -213,6 +215,7 @@ image-$(CONFIG_WALNUT)			+= treeImage.walnut
 # Board ports in arch/powerpc/platform/44x/Kconfig
 image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
 image-$(CONFIG_BAMBOO)			+= treeImage.bamboo cuImage.bamboo
+image-$(CONFIG_SAM440EP)		+= cuImage.sam440ep
 image-$(CONFIG_SEQUOIA)			+= cuImage.sequoia
 image-$(CONFIG_RAINIER)			+= cuImage.rainier
 image-$(CONFIG_TAISHAN)			+= cuImage.taishan
@@ -242,6 +245,7 @@ image-$(CONFIG_MPC834x_ITX)		+= cuImage.mpc8349emitx \
 					   cuImage.mpc8349emitxgp
 image-$(CONFIG_MPC834x_MDS)		+= cuImage.mpc834x_mds
 image-$(CONFIG_MPC836x_MDS)		+= cuImage.mpc836x_mds
+image-$(CONFIG_ASP834x)			+= dtbImage.asp834x-redboot
 
 # Board ports in arch/powerpc/platform/85xx/Kconfig
 image-$(CONFIG_MPC8540_ADS)		+= cuImage.mpc8540ads
@@ -254,6 +258,7 @@ image-$(CONFIG_MPC85xx_DS)		+= cuImage.mpc8544ds \
 					   cuImage.mpc8572ds
 image-$(CONFIG_TQM8540)			+= cuImage.tqm8540
 image-$(CONFIG_TQM8541)			+= cuImage.tqm8541
+image-$(CONFIG_TQM8548)			+= cuImage.tqm8548
 image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
@@ -263,6 +268,7 @@ image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2
+image-$(CONFIG_PPC_C2K)			+= cuImage.c2k
 
 # For 32-bit powermacs, build the COFF and miboot images
 # as well as the ELF images.
@@ -270,6 +276,9 @@ ifeq ($(CONFIG_PPC32),y)
 image-$(CONFIG_PPC_PMAC)	+= zImage.coff zImage.miboot
 endif
 
+# Allow extra targets to be added to the defconfig
+image-y	+= $(subst ",,$(CONFIG_EXTRA_TARGETS))
+
 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
 initrd-y := $(patsubst zImage%, zImage.initrd%, \
 		$(patsubst dtbImage%, dtbImage.initrd%, \
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 8041a9845ab7..b1e5611b2ab1 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -25,7 +25,7 @@ char arch[] = "PowerPC";
 #define N_DESCR	6
 unsigned int descr[N_DESCR] = {
 	0xffffffff,		/* real-mode = true */
-	0x00c00000,		/* real-base, i.e. where we expect OF to be */
+	0x02000000,		/* real-base, i.e. where we expect OF to be */
 	0xffffffff,		/* real-size */
 	0xffffffff,		/* virt-base */
 	0xffffffff,		/* virt-size */
diff --git a/arch/powerpc/boot/cuboot-c2k.c b/arch/powerpc/boot/cuboot-c2k.c
new file mode 100644
index 000000000000..e43594950ba3
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-c2k.c
@@ -0,0 +1,190 @@
+/*
+ * GEFanuc C2K platform code.
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.c
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "types.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+#include "elf.h"
+#include "gunzip_util.h"
+#include "mv64x60.h"
+#include "cuboot.h"
+#include "ppcboot.h"
+
+static u8 *bridge_base;
+
+static void c2k_bridge_setup(u32 mem_size)
+{
+	u32 i, v[30], enables, acc_bits;
+	u32 pci_base_hi, pci_base_lo, size, buf[2];
+	unsigned long cpu_base;
+	int rc;
+	void *devp, *mv64x60_devp;
+	u8 *bridge_pbase, is_coherent;
+	struct mv64x60_cpu2pci_win *tbl;
+	int bus;
+
+	bridge_pbase = mv64x60_get_bridge_pbase();
+	is_coherent = mv64x60_is_coherent();
+
+	if (is_coherent)
+		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
+			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
+			| MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
+			| MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+	else
+		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
+			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
+			| MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
+			| MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+
+	mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
+	mv64x60_devp = find_node_by_compatible(NULL, "marvell,mv64360");
+	if (mv64x60_devp == NULL)
+		fatal("Error: Missing marvell,mv64360 device tree node\n\r");
+
+	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
+	enables |= 0x007ffe00; /* Disable all cpu->pci windows */
+	out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
+
+	/* Get the cpu -> pci i/o & mem mappings from the device tree */
+	devp = NULL;
+	for (bus = 0; ; bus++) {
+		char name[] = "pci ";
+
+		name[strlen(name)-1] = bus+'0';
+
+		devp = find_node_by_alias(name);
+		if (devp == NULL)
+			break;
+
+		if (bus >= 2)
+			fatal("Error: Only 2 PCI controllers are supported at" \
+				" this time.\n");
+
+		mv64x60_config_pci_windows(bridge_base, bridge_pbase, bus, 0,
+				mem_size, acc_bits);
+
+		rc = getprop(devp, "ranges", v, sizeof(v));
+		if (rc == 0)
+			fatal("Error: Can't find marvell,mv64360-pci ranges"
+				" property\n\r");
+
+		/* Get the cpu -> pci i/o & mem mappings from the device tree */
+
+		for (i = 0; i < rc; i += 6) {
+			switch (v[i] & 0xff000000) {
+			case 0x01000000: /* PCI I/O Space */
+				tbl = mv64x60_cpu2pci_io;
+				break;
+			case 0x02000000: /* PCI MEM Space */
+				tbl = mv64x60_cpu2pci_mem;
+				break;
+			default:
+				continue;
+			}
+
+			pci_base_hi = v[i+1];
+			pci_base_lo = v[i+2];
+			cpu_base = v[i+3];
+			size = v[i+5];
+
+			buf[0] = cpu_base;
+			buf[1] = size;
+
+			if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
+				fatal("Error: Can't translate PCI address " \
+						"0x%x\n\r", (u32)cpu_base);
+
+			mv64x60_config_cpu2pci_window(bridge_base, bus,
+				pci_base_hi, pci_base_lo, cpu_base, size, tbl);
+		}
+
+		enables &= ~(3<<(9+bus*5)); /* Enable cpu->pci<bus> i/o,
+						cpu->pci<bus> mem0 */
+		out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE),
+			enables);
+	};
+}
+
+static void c2k_fixups(void)
+{
+	u32 mem_size;
+
+	mem_size = mv64x60_get_mem_size(bridge_base);
+	c2k_bridge_setup(mem_size); /* Do necessary bridge setup */
+}
+
+#define MV64x60_MPP_CNTL_0	0xf000
+#define MV64x60_MPP_CNTL_2	0xf008
+#define MV64x60_GPP_IO_CNTL	0xf100
+#define MV64x60_GPP_LEVEL_CNTL	0xf110
+#define MV64x60_GPP_VALUE_SET	0xf118
+
+static void c2k_reset(void)
+{
+	u32 temp;
+
+	udelay(5000000);
+
+	if (bridge_base != 0) {
+		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
+		temp &= 0xFFFF0FFF;
+		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+		temp |= 0x00000004;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+		temp |= 0x00000004;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
+		temp &= 0xFFFF0FFF;
+		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+		temp |= 0x00080000;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+		temp |= 0x00080000;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
+				0x00080004);
+	}
+
+	for (;;);
+}
+
+static bd_t bd;
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+
+	fdt_init(_dtb_start);
+
+	bridge_base = mv64x60_get_bridge_base();
+
+	platform_ops.fixups = c2k_fixups;
+	platform_ops.exit = c2k_reset;
+
+	if (serial_console_init() < 0)
+		exit();
+}
diff --git a/arch/powerpc/boot/cuboot-sam440ep.c b/arch/powerpc/boot/cuboot-sam440ep.c
new file mode 100644
index 000000000000..ec10a47460dd
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-sam440ep.c
@@ -0,0 +1,49 @@
+/*
+ * Old U-boot compatibility for Sam440ep based off bamboo.c code
+ * original copyrights below
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2007 IBM Corporation
+ *
+ * Based on cuboot-ebony.c
+ *
+ * Modified from cuboot-bamboo.c for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "44x.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void sam440ep_fixups(void)
+{
+       unsigned long sysclk = 66666666;
+
+       ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
+       ibm4xx_sdram_fixup_memsize();
+       ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+       dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = sam440ep_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index eb108a877492..21780210057d 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -10,6 +10,7 @@
 #include "ops.h"
 #include "4xx.h"
 #include "cuboot.h"
+#include "stdio.h"
 
 #define TARGET_4xx
 #define TARGET_44x
@@ -17,14 +18,54 @@
 
 static bd_t bd;
 
-static void warp_fixups(void)
+static void warp_fixup_one_nor(u32 from, u32 to)
 {
-	unsigned long sysclk = 66000000;
+	void *devp;
+	char name[50];
+	u32 v[2];
+
+	sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from);
+
+	devp = finddevice(name);
+	if (!devp)
+		return;
+
+	if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+		v[0] = to;
+		setprop(devp, "reg", v, sizeof(v));
+
+		printf("NOR 64M fixup %x -> %x\r\n", from, to);
+	}
+}
+
 
-	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+static void warp_fixups(void)
+{
+	ibm440ep_fixup_clocks(66000000, 11059200, 50000000);
 	ibm4xx_sdram_fixup_memsize();
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+
+	/* Fixup for 64M flash on Rev A boards. */
+	if (bd.bi_flashsize == 0x4000000) {
+		void *devp;
+		u32 v[3];
+
+		devp = finddevice("/plb/opb/ebc/nor_flash@0,0");
+		if (!devp)
+			return;
+
+		/* Fixup the size */
+		if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+			v[2] = bd.bi_flashsize;
+			setprop(devp, "reg", v, sizeof(v));
+		}
+
+		/* Fixup parition offsets */
+		warp_fixup_one_nor(0x300000, 0x3f00000);
+		warp_fixup_one_nor(0x340000, 0x3f40000);
+		warp_fixup_one_nor(0x380000, 0x3f80000);
+	}
 }
 
 
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
new file mode 100644
index 000000000000..8b1bb0e41905
--- /dev/null
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -0,0 +1,282 @@
+/*
+ * Analogue & Micro ASP8347 Device Tree Source
+ *
+ * Copyright 2008 Codehermit
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Analogue & Micro ASP8347E";
+	compatible = "analogue-and-micro,asp8347e";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8347@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;	// 128MB at 0
+	};
+
+	localbus@ff005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8347e-localbus",
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xff005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		ranges = <
+			0 0 0xf0000000 0x02000000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc8349@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x00100000>;
+		reg = <0xff000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supported for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port1;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&ipic>;
+				interrupts = <17 0x8>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&ipic>;
+				interrupts = <18 0x8>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 33 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy0>;
+			linux,network-index = <0>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 34 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy1>;
+			linux,network-index = <1>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <0x01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
+		linux,stdout-path = &serial0;
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index ba2521bdaab1..6ce0cc2c0208 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -11,12 +11,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,bamboo";
 	compatible = "amcc,bamboo";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -34,13 +36,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -48,14 +50,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,22 +67,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -92,29 +94,29 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
@@ -124,101 +126,101 @@
 			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
 			 * bits.
 			 */
-		  	ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -227,26 +229,26 @@
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <ef600f00 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 1 9 1>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
@@ -258,35 +260,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
 			primary;
-			reg = <0 eec00000 8	/* Config space access */
-			       0 eed00000 4	/* IACK */
-			       0 eed00000 4	/* Special cycle */
-			       0 ef400000 40>;	/* Internal registers */
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
-				  01000000 0 00000000 0 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Bamboo has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1b 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1a 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 19 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts
new file mode 100644
index 000000000000..f5d625fa3e52
--- /dev/null
+++ b/arch/powerpc/boot/dts/c2k.dts
@@ -0,0 +1,371 @@
+/* Device Tree Source for GEFanuc C2K
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.dts
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "C2K";
+	compatible = "GEFanuc,C2K";
+	coherency-off;
+
+	aliases {
+		pci0 = &PCI0;
+		pci1 = &PCI1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "PowerPC,7447";
+			reg = <0>;
+			clock-frequency = <996000000>;	/* 996 MHz */
+			bus-frequency = <166666667>;	/* 166.6666 MHz */
+			timebase-frequency = <41666667>;	/* 166.6666/4 MHz */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;	/* 1GB */
+	};
+
+	system-controller@d8000000 { /* Marvell Discovery */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		model = "mv64460";
+		compatible = "marvell,mv64360";
+		clock-frequency = <166666667>;		/* 166.66... MHz */
+		reg = <0xd8000000 0x00010000>;
+		virtual-reg = <0xd8000000>;
+		ranges = <0xd4000000 0xd4000000 0x01000000	/* PCI 0 I/O Space */
+			  0x80000000 0x80000000 0x08000000	/* PCI 0 MEM Space */
+			  0xd0000000 0xd0000000 0x01000000	/* PCI 1 I/O Space */
+			  0xa0000000 0xa0000000 0x08000000	/* PCI 1 MEM Space */
+			  0xd8100000 0xd8100000 0x00010000	/* FPGA */
+			  0xd8110000 0xd8110000 0x00010000	/* FPGA USARTs */
+			  0xf8000000 0xf8000000 0x08000000	/* User FLASH */
+			  0x00000000 0xd8000000 0x00010000	/* Bridge's regs */
+			  0xd8140000 0xd8140000 0x00040000>;	/* Integrated SRAM */
+
+		mdio@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-mdio";
+			reg = <0x2000 4>;
+			PHY0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <0>;
+			};
+			PHY1: ethernet-phy@1 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <1>;
+			};
+			PHY2: ethernet-phy@2 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <2>;
+			};
+		};
+
+		ethernet-group@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-eth-group";
+			reg = <0x2000 0x2000>;
+			ethernet@0 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <0>;
+				interrupts = <32>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY0>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@1 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <1>;
+				interrupts = <33>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@2 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <2>;
+				interrupts = <34>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY2>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		SDMA0: sdma@4000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x4000 0xc18>;
+			virtual-reg = <0xd8004000>;
+			interrupt-base = <0>;
+			interrupts = <36>;
+			interrupt-parent = <&PIC>;
+		};
+
+		SDMA1: sdma@6000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x6000 0xc18>;
+			virtual-reg = <0xd8006000>;
+			interrupt-base = <0>;
+			interrupts = <38>;
+			interrupt-parent = <&PIC>;
+		};
+
+		BRG0: brg@b200 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb200 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		BRG1: brg@b208 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb208 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		CUNIT: cunit@f200 {
+			reg = <0xf200 0x200>;
+		};
+
+		MPSCROUTING: mpscrouting@b400 {
+			reg = <0xb400 0xc>;
+		};
+
+		MPSCINTR: mpscintr@b800 {
+			reg = <0xb800 0x100>;
+			virtual-reg = <0xd800b800>;
+		};
+
+		MPSC0: mpsc@8000 {
+			device_type = "serial";
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x8000 0x38>;
+			virtual-reg = <0xd8008000>;
+			sdma = <&SDMA0>;
+			brg = <&BRG0>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <0>;
+			interrupts = <40>;
+			interrupt-parent = <&PIC>;
+		};
+
+		MPSC1: mpsc@9000 {
+			device_type = "serial";
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x9000 0x38>;
+			virtual-reg = <0xd8009000>;
+			sdma = <&SDMA1>;
+			brg = <&BRG1>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <1>;
+			interrupts = <42>;
+			interrupt-parent = <&PIC>;
+		};
+
+		wdt@b410 {			/* watchdog timer */
+			compatible = "marvell,mv64360-wdt";
+			reg = <0xb410 0x8>;
+		};
+
+		i2c@c000 {
+			compatible = "marvell,mv64360-i2c";
+			reg = <0xc000 0x20>;
+			virtual-reg = <0xd800c000>;
+			interrupts = <37>;
+			interrupt-parent = <&PIC>;
+		};
+
+		PIC: pic {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "marvell,mv64360-pic";
+			reg = <0x0000 0x88>;
+			interrupt-controller;
+		};
+
+		mpp@f000 {
+			compatible = "marvell,mv64360-mpp";
+			reg = <0xf000 0x10>;
+		};
+
+		gpp@f100 {
+			compatible = "marvell,mv64360-gpp";
+			reg = <0xf100 0x20>;
+		};
+
+		PCI0: pci@80000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0cf8 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0c34>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* Only one interrupt line for PMC0 slot (INTA) */
+				0x0000 0 0 1 &PIC 88
+			>;
+		};
+
+
+		PCI1: pci@a0000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0c78 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0cb4>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
+			interrupt-map = <
+				/* IDSEL 0x01: PMC1 ? */
+				0x0800 0 0 1 &PIC 88
+				/* IDSEL 0x02: cPCI bridge */
+				0x1000 0 0 1 &PIC 88
+				/* IDSEL 0x03: USB controller */
+				0x1800 0 0 1 &PIC 91
+				/* IDSEL 0x04: SATA controller */
+				0x2000 0 0 1 &PIC 95
+			>;
+		};
+
+		cpu-error@0070 {
+			compatible = "marvell,mv64360-cpu-error";
+			reg = <0x0070 0x10 0x0128 0x28>;
+			interrupts = <3>;
+			interrupt-parent = <&PIC>;
+		};
+
+		sram-ctrl@0380 {
+			compatible = "marvell,mv64360-sram-ctrl";
+			reg = <0x0380 0x80>;
+			interrupts = <13>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1d40 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1d40 0x40 0x0c28 0x4>;
+			interrupts = <12>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1dc0 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1dc0 0x40 0x0ca8 0x4>;
+			interrupts = <16>;
+			interrupt-parent = <&PIC>;
+		};
+
+		mem-ctrl@1400 {
+			compatible = "marvell,mv64360-mem-ctrl";
+			reg = <0x1400 0x60>;
+			interrupts = <17>;
+			interrupt-parent = <&PIC>;
+		};
+		/* Devices attached to the device controller */
+		devicebus@045c {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "marvell,mv64306-devctrl";
+			reg = <0x45C 0x88>;
+			interrupts = <1>;
+			interrupt-parent = <&PIC>;
+			ranges = 	<0 0 0xd8100000 0x10000
+					 2 0 0xd8110000 0x10000
+					 4 0 0xf8000000 0x8000000>;
+			fpga@0,0 {
+				compatible = "sbs,fpga-c2k";
+				reg = <0 0 0x10000>;
+			};
+			fpga_usart@2,0 {
+				compatible = "sbs,fpga_usart-c2k";
+				reg = <2 0 0x10000>;
+			};
+			nor_flash@4,0 {
+				compatible = "cfi-flash";
+				reg = <4 0 0x8000000>; /* 128MB */
+				bank-width = <4>;
+				device-width = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				partition@0 {
+					label = "boot";
+					reg = <0x00000000 0x00080000>;
+				};
+				partition@40000 {
+					label = "kernel";
+					reg = <0x00080000 0x00400000>;
+				};
+				partition@440000 {
+					label = "initrd";
+					reg = <0x00480000 0x00B80000>;
+				};
+				partition@1000000 {
+					label = "rootfs";
+					reg = <0x01000000 0x06800000>;
+				};
+				partition@7800000 {
+					label = "recovery";
+					reg = <0x07800000 0x00800000>;
+					read-only;
+				};
+			};
+		};
+	};
+	chosen {
+		linux,stdout-path = &MPSC0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 39634124929b..79fe412c11c9 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,canyonlands";
 	compatible = "amcc,canyonlands";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,460EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -84,22 +86,22 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-460ex";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-460ex";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -111,74 +113,74 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
-			num-rx-chans = <10>;
+			num-rx-chans = <16>;
 			#address-cells = <0>;
 			#size-cells = <0>;
 			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 6 4
-					/*RXEOB*/ 7 4
-					/*SERR*/  3 4
-					/*TXDE*/  4 4
-					/*RXDE*/  5 4>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <b0000000 4 b0000000 50000000>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-460ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <6 4>;
+				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 1e0000>;
+						reg = <0x00000000 0x001e0000>;
 					};
 					partition@1e0000 {
 						label = "dtb";
-						reg = <1e0000 20000>;
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "ramdisk";
-						reg = <200000 1400000>;
+						reg = <0x00200000 0x01400000>;
 					};
 					partition@1600000 {
 						label = "jffs2";
-						reg = <1600000 400000>;
+						reg = <0x01600000 0x00400000>;
 					};
 					partition@1a00000 {
 						label = "user";
-						reg = <1a00000 2560000>;
+						reg = <0x01a00000 0x02560000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -186,103 +188,103 @@
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1d 4>;
+				interrupts = <0x1d 0x4>;
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4>;
+				interrupts = <0x1e 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460ex", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601500 {
 				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
-				reg = <ef601500 8>;
+				reg = <0xef601500 0x00000008>;
 				has-mdio;
 			};
 
 			TAH0: emac-tah@ef601350 {
 				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <ef601350 30>;
+				reg = <0xef601350 0x00000030>;
 			};
 
 			TAH1: emac-tah@ef601450 {
 				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <ef601450 30>;
+				reg = <0xef601450 0x00000030>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 10 4
-						 /*Wake*/   1 &UIC2 14 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				tah-device = <&TAH0>;
@@ -293,25 +295,25 @@
 
 			EMAC1: ethernet@ef600f00 {
 				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 11 4
-						 /*Wake*/   1 &UIC2 15 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <8>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				tah-device = <&TAH1>;
@@ -331,27 +333,27 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0x3f */
-			bus-range = <0 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
 		};
 
 		PCIE0: pciex@d00000000 {
@@ -361,23 +363,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 08010000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -387,12 +389,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -402,23 +404,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 08011000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 80 to 0xbf */
-			bus-range = <80 bf>;
+			bus-range = <0x80 0xbf>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -428,12 +430,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 5079dc890e0e..ec2d142291b4 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -11,12 +11,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "ibm,ebony";
 	compatible = "ibm,ebony";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; // Filled in by zImage
 			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>; /* 32 kB */
-			d-cache-size = <8000>; /* 32 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -46,14 +48,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; // Filled in by zImage
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,17 +66,17 @@
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	CPC0: cpc {
 		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0b0 003 0e0 010>;
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
 		// FIXME: anything else?
 	};
 
@@ -87,37 +89,37 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-440gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 			// FIXME: anything else?
 		};
 
 		SRAM0: sram {
 			compatible = "ibm,sram-440gp";
-			dcr-reg = <020 8 00a 1>;
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
 		};
 
 		DMA0: dma {
 			// FIXME: ???
 			compatible = "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <4>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					 /*RXEOB*/ 1 &UIC0 b 4
-					 /*SERR*/  2 &UIC1 0 4
-					 /*TXDE*/  3 &UIC1 1 4
-					 /*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
@@ -126,34 +128,34 @@
 			#size-cells = <1>;
 			/* Wish there was a nicer way of specifying a full 32-bit
 			   range */
-			ranges = <00000000 1 00000000 80000000
-				  80000000 1 80000000 80000000>;
-			dcr-reg = <090 00b>;
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
+			interrupts = <0x7 0x4>;
 			clock-frequency = <0>; // Filled in by zImage
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; // Filled in by zImage
 				// ranges property is supplied by zImage
 				// based on firmware's configuration of the
 				// EBC bridge
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				small-flash@0,80000 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <0 80000 80000>;
+					reg = <0x00000000 0x00080000 0x00080000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "OpenBIOS";
-						reg = <0 80000>;
+						reg = <0x00000000 0x00080000>;
 						read-only;
 					};
 				};
@@ -161,101 +163,101 @@
 				nvram@1,0 {
 					/* NVRAM & RTC */
 					compatible = "ds1743-nvram";
-					#bytes = <2000>;
-					reg = <1 0 2000>;
+					#bytes = <0x2000>;
+					reg = <0x00000001 0x00000000 0x00002000>;
 				};
 
 				large-flash@2,0 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <2 0 400000>;
+					reg = <0x00000002 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "fs";
-						reg = <0 380000>;
+						reg = <0x00000000 0x00380000>;
 					};
 					partition@380000 {
 						label = "firmware";
-						reg = <380000 80000>;
+						reg = <0x00380000 0x00080000>;
 					};
 				};
 
 				ir@3,0 {
-					reg = <3 0 10>;
+					reg = <0x00000003 0x00000000 0x00000010>;
 				};
 
 				fpga@7,0 {
 					compatible = "Ebony-FPGA";
-					reg = <7 0 10>;
-					virtual-reg = <e8300000>;
+					reg = <0x00000007 0x00000000 0x00000010>;
+					virtual-reg = <0xe8300000>;
 				};
 			};
 
 			UART0: serial@40000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000200 8>;
-				virtual-reg = <e0000200>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@40000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000300 8>;
-				virtual-reg = <e0000300>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@40000400 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000400 14>;
+				reg = <0x40000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 			IIC1: i2c@40000500 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000500 14>;
+				reg = <0x40000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			GPIO0: gpio@40000700 {
 				/* FIXME */
 				compatible = "ibm,gpio-440gp";
-				reg = <40000700 20>;
+				reg = <0x40000700 0x00000020>;
 			};
 
 			ZMII0: emac-zmii@40000780 {
 				compatible = "ibm,zmii-440gp", "ibm,zmii";
-				reg = <40000780 c>;
+				reg = <0x40000780 0x0000000c>;
 			};
 
 			EMAC0: ethernet@40000800 {
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <40000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -263,18 +265,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <40000900 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
@@ -282,9 +284,9 @@
 
 			GPT0: gpt@40000a00 {
 				/* FIXME */
-				reg = <40000a00 d4>;
+				reg = <0x40000a00 0x000000d4>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <12 4 13 4 14 4 15 4 16 4>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
 			};
 
 		};
@@ -296,35 +298,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
 			primary;
-			reg = <2 0ec00000 8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       2 0ed00000 4     /* Special cycles */
-			       2 0ec80000 f0	/* Internal registers */
-			       2 0ec80100 fc>;	/* Internal messaging registers */
+			reg = <0x00000002 0x0ec00000 0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000 0x00000004     /* Special cycles */
+			       0x00000002 0x0ec80000 0x000000f0	/* Internal registers */
+			       0x00000002 0x0ec80100 0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 00000003 80000000 0 80000000
-				  01000000 0 00000000 00000002 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Ebony has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 17 8
+				0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 18 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 19 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 1a 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts
index 92938557ac8a..53ef06cc2134 100644
--- a/arch/powerpc/boot/dts/ep405.dts
+++ b/arch/powerpc/boot/dts/ep405.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "ep405";
 	compatible = "ep405";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405GP";
-			reg = <0>;
-			clock-frequency = <bebc200>; /* Filled in by zImage */
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 9>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,91 +67,91 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL: mcmal {
 			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <1>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&UIC0>;
 			interrupts = <
-				b 4 /* TXEOB */
-				c 4 /* RXEOB */
-				a 4 /* SERR */
-				d 4 /* TXDE */
-				e 4 /* RXDE */>;
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <ef600000 ef600000 a00000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC: i2c@ef600500 {
 				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <ef600500 11>;
+				reg = <0xef600500 0x00000011>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			GPIO: gpio@ef600700 {
 				compatible = "ibm,gpio-405gp";
-				reg = <ef600700 20>;
+				reg = <0xef600700 0x00000020>;
 			};
 
 			EMAC: ethernet@ef600800 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
 				interrupts = <
-					f 4 /* Ethernet */
-					9 4 /* Ethernet Wake Up */>;
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
 				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <ef600800 70>;
+				reg = <0xef600800 0x00000070>;
 				mal-device = <&MAL>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 			};
 
 		};
 
 		EBC0: ebc {
 			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <012 2>;
+			dcr-reg = <0x012 0x002>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 
@@ -163,13 +165,13 @@
 			/* NVRAM and RTC */
 			nvrtc@4,200000 {
 				compatible = "ds1742";
-				reg = <4 200000 0>; /* size fixed up by zImage */
+				reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */
 			};
 
 			/* "BCSR" CPLD contains a PCI irq controller */
 			bcsr@4,0 {
 				compatible = "ep405-bcsr";
-				reg = <4 0 10>;
+				reg = <0x00000004 0x00000000 0x00000010>;
 				interrupt-controller;
 				/* Routing table */
 				irq-routing = [	00	/* SYSERR */
@@ -198,26 +200,26 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
 			primary;
-			reg = <eec00000 8	/* Config space access */
-			       eed80000 4	/* IACK */
-			       eed80000 4	/* Special cycle */
-			       ef480000 40>;	/* Internal registers */
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 80000000 0 20000000
-				  01000000 0 00000000 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* That's all I know about IRQs on that thing ... */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* USB */
-				7000 0 0 0 &UIC0 1e 8 /* IRQ5 */
+				0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index 0f2fc077d8db..24cf0dba120c 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,glacier";
 	compatible = "amcc,glacier", "amcc,canyonlands";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -31,13 +33,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,460GT";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -45,14 +47,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -62,11 +64,11 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -74,11 +76,11 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -86,22 +88,22 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-460gt";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-460gt";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -113,75 +115,75 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
-			num-rx-chans = <20>;
+			num-rx-chans = <32>;
 			#address-cells = <0>;
 			#size-cells = <0>;
 			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 6 4
-					/*RXEOB*/ 7 4
-					/*SERR*/  3 4
-					/*TXDE*/  4 4
-					/*RXDE*/  5 4>;
-			desc-base-addr-high = <8>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460gt", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <b0000000 4 b0000000 50000000>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-460gt", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <6 4>;
+				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 1e0000>;
+						reg = <0x00000000 0x001e0000>;
 					};
 					partition@1e0000 {
 						label = "dtb";
-						reg = <1e0000 20000>;
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "ramdisk";
-						reg = <200000 1400000>;
+						reg = <0x00200000 0x01400000>;
 					};
 					partition@1600000 {
 						label = "jffs2";
-						reg = <1600000 400000>;
+						reg = <0x01600000 0x00400000>;
 					};
 					partition@1a00000 {
 						label = "user";
-						reg = <1a00000 2560000>;
+						reg = <0x01a00000 0x02560000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -189,109 +191,109 @@
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1d 4>;
+				interrupts = <0x1d 0x4>;
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4>;
+				interrupts = <0x1e 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460gt", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601500 {
 				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <ef601500 8>;
+				reg = <0xef601500 0x00000008>;
 				has-mdio;
 			};
 
 			RGMII1: emac-rgmii@ef601600 {
 				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <ef601600 8>;
+				reg = <0xef601600 0x00000008>;
 				has-mdio;
 			};
 
 			TAH0: emac-tah@ef601350 {
 				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <ef601350 30>;
+				reg = <0xef601350 0x00000030>;
 			};
 
 			TAH1: emac-tah@ef601450 {
 				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <ef601450 30>;
+				reg = <0xef601450 0x00000030>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 10 4
-						 /*Wake*/   1 &UIC2 14 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				tah-device = <&TAH0>;
@@ -304,23 +306,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 11 4
-						 /*Wake*/   1 &UIC2 15 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <8>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				tah-device = <&TAH1>;
@@ -334,23 +336,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC2>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 12 4
-						 /*Wake*/   1 &UIC2 16 4>;
-				reg = <ef601100 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
-				mal-rx-channel = <10>;
+				mal-rx-channel = <16>;
 				cell-index = <2>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -362,23 +364,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC3>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 13 4
-						 /*Wake*/   1 &UIC2 17 4>;
-				reg = <ef601200 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
+				reg = <0xef601200 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
-				mal-rx-channel = <18>;
+				mal-rx-channel = <24>;
 				cell-index = <3>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -396,27 +398,27 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0x3f */
-			bus-range = <0 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
 		};
 
 		PCIE0: pciex@d00000000 {
@@ -426,23 +428,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 08010000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -452,12 +454,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -467,23 +469,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 08011000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 80 to 0xbf */
-			bus-range = <80 bf>;
+			bus-range = <0x80 0xbf>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -493,12 +495,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index b5d95ac24dbf..513bc43a71af 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,haleakala";
 	compatible = "amcc,haleakala", "amcc,kilauea";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EXr";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -42,14 +44,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405exr", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -59,11 +61,11 @@
 		compatible = "ibm,uic-405exr","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -71,11 +73,11 @@
 		compatible = "ibm,uic-405exr","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -88,72 +90,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405exr";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405exr", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405exr", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -161,68 +163,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405exr", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405exr", "ibm,emac4";
+				compatible = "ibm,emac-405exr", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -237,23 +239,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -263,12 +265,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
index b5d87895fe06..f87fe7b9ced9 100644
--- a/arch/powerpc/boot/dts/holly.dts
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -10,6 +10,8 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	model = "41K7339";
 	compatible = "ibm,holly";
@@ -21,22 +23,22 @@
 		#size-cells =<0>;
 		PowerPC,750CL@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;
-			i-cache-line-size = <20>;
-			d-cache-size = <8000>;
-			i-cache-size = <8000>;
-			d-cache-sets = <80>;
-			i-cache-sets = <80>;
-			timebase-frequency = <2faf080>;
-			clock-frequency = <23c34600>;
-			bus-frequency = <bebc200>;
+			reg = <0x00000000>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			d-cache-sets = <128>;
+			i-cache-sets = <128>;
+			timebase-frequency = <50000000>;
+			clock-frequency = <600000000>;
+			bus-frequency = <200000000>;
 		};
 	};
 
 	memory@0 {
 		device_type = "memory";
-		reg = <00000000 20000000>;
+		reg = <0x00000000 0x20000000>;
 	};
 
   	tsi109@c0000000 {
@@ -44,33 +46,33 @@
 		compatible = "tsi109-bridge", "tsi108-bridge";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <00000000 c0000000 00010000>;
-		reg = <c0000000 00010000>;
+		ranges = <0x00000000 0xc0000000 0x00010000>;
+		reg = <0xc0000000 0x00010000>;
 
 		i2c@7000 {
 			device_type = "i2c";
 			compatible  = "tsi109-i2c", "tsi108-i2c";
 			interrupt-parent = <&MPIC>;
-			interrupts = <e 2>;
-			reg = <7000 400>;
+			interrupts = <0xe 0x2>;
+			reg = <0x00007000 0x00000400>;
 		};
 
 		MDIO: mdio@6000 {
 			device_type = "mdio";
 			compatible = "tsi109-mdio", "tsi108-mdio";
-			reg = <6000 50>;
+			reg = <0x00006000 0x00000050>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			PHY1: ethernet-phy@1 {
 				compatible = "bcm5461a";
-				reg = <1>;
+				reg = <0x00000001>;
 				txc-rxc-delay-disable;
 			};
 
 			PHY2: ethernet-phy@2 {
 				compatible = "bcm5461a";
-				reg = <2>;
+				reg = <0x00000002>;
 				txc-rxc-delay-disable;
 			};
 		};
@@ -80,10 +82,10 @@
 			compatible = "tsi109-ethernet", "tsi108-ethernet";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <6000 200>;
+			reg = <0x00006000 0x00000200>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupt-parent = <&MPIC>;
-			interrupts = <10 2>;
+			interrupts = <0x10 0x2>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&PHY1>;
 		};
@@ -93,10 +95,10 @@
 			compatible = "tsi109-ethernet", "tsi108-ethernet";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <6400 200>;
+			reg = <0x00006400 0x00000200>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupt-parent = <&MPIC>;
-			interrupts = <11 2>;
+			interrupts = <0x11 0x2>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&PHY2>;
 		};
@@ -104,23 +106,23 @@
 		serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7808 200>;
-			virtual-reg = <c0007808>;
-			clock-frequency = <3F9C6000>;
-			current-speed = <1c200>;
+			reg = <0x00007808 0x00000200>;
+			virtual-reg = <0xc0007808>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <c 2>;
+			interrupts = <0xc 0x2>;
 		};
 
 		serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7c08 200>;
-			virtual-reg = <c0007c08>;
-			clock-frequency = <3F9C6000>;
-			current-speed = <1c200>;
+			reg = <0x00007c08 0x00000200>;
+			virtual-reg = <0xc0007c08>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <d 2>;
+			interrupts = <0xd 0x2>;
 		};
 
 	  	MPIC: pic@7400 {
@@ -128,7 +130,7 @@
 			compatible = "chrp,open-pic";
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <7400 400>;
+			reg = <0x00007400 0x00000400>;
 			big-endian;
 		};
 
@@ -138,42 +140,42 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <1000 1000>;
-			bus-range = <0 0>;
+			reg = <0x00001000 0x00001000>;
+			bus-range = <0x0 0x0>;
 			/*----------------------------------------------------+
 			| PCI memory range.
 			| 01 denotes I/O space
 			| 02 denotes 32-bit memory space
 			+----------------------------------------------------*/
-			ranges = <02000000 0 40000000 40000000 0 10000000
-				  01000000 0 00000000 7e000000 0 00010000>;
-			clock-frequency = <7f28154>;
+			ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+				  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+			clock-frequency = <133333332>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <17 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupts = <0x17 0x2>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			/*----------------------------------------------------+
 			| The INTA, INTB, INTC, INTD are shared.
 			+----------------------------------------------------*/
 			interrupt-map = <
-				0800 0 0 1 &RT0 24 0
-				0800 0 0 2 &RT0 25 0
-				0800 0 0 3 &RT0 26 0
-				0800 0 0 4 &RT0 27 0
-
-				1000 0 0 1 &RT0 25 0
-				1000 0 0 2 &RT0 26 0
-				1000 0 0 3 &RT0 27 0
-				1000 0 0 4 &RT0 24 0
-
-				1800 0 0 1 &RT0 26 0
-				1800 0 0 2 &RT0 27 0
-				1800 0 0 3 &RT0 24 0
-				1800 0 0 4 &RT0 25 0
-
-				2000 0 0 1 &RT0 27 0
-				2000 0 0 2 &RT0 24 0
-				2000 0 0 3 &RT0 25 0
-				2000 0 0 4 &RT0 26 0
+				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
 				>;
 
 			RT0: router@1180 {
@@ -183,7 +185,7 @@
  				clock-frequency = <0>;
  				#address-cells = <0>;
  				#interrupt-cells = <2>;
- 				interrupts = <17 2>;
+ 				interrupts = <0x17 0x2>;
 				interrupt-parent = <&MPIC>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index cc2873a531d2..077819bc3cbd 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -12,12 +12,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,katmai";
 	compatible = "amcc,katmai";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -33,13 +35,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440SPe";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -47,14 +49,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -76,11 +78,11 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -88,22 +90,22 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440spe";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440spe";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -115,108 +117,108 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC1 6 4
-					 /*RXEOB*/ 1 &UIC1 7 4
-					 /*SERR*/  2 &UIC1 1 4
-					 /*TXDE*/  3 &UIC1 2 4
-					 /*RXDE*/  4 &UIC1 3 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <00000000 4 e0000000 20000000>;
+			ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@10000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000200 8>;
-				virtual-reg = <a0000200>;
+				reg = <0x10000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <1c200>;
+				current-speed = <115200>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@10000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000300 8>;
-				virtual-reg = <a0000300>;
+				reg = <0x10000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 
 			UART2: serial@10000600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000600 8>;
-				virtual-reg = <a0000600>;
+				reg = <0x10000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC1>;
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 			};
 
 			IIC0: i2c@10000400 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <10000400 14>;
+				reg = <0x10000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@10000500 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <10000500 14>;
+				reg = <0x10000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			EMAC0: ethernet@10000800 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-440spe", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <10000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x10000800 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "gmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
@@ -231,23 +233,23 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0xf */
-			bus-range = <0 f>;
+			bus-range = <0x0 0xf>;
 
 			/*
 			 * On Katmai, the following PCI-X interrupts signals
@@ -258,13 +260,13 @@
 			 * INTC: J2: 1-2
 			 * INTD: J1: 1-2
 			 */
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 1 &UIC1 14 8
-				0800 0 0 2 &UIC1 13 8
-				0800 0 0 3 &UIC1 12 8
-				0800 0 0 4 &UIC1 11 8
+				0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
+				0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
+				0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
+				0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
 			>;
 		};
 
@@ -275,23 +277,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 10000000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <10 1f>;
+			bus-range = <0x10 0x1f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -301,12 +303,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -316,23 +318,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 10001000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <20 2f>;
+			bus-range = <0x20 0x2f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -342,12 +344,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 4 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 5 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 6 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 7 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
 		};
 
 		PCIE2: pciex@d40000000 {
@@ -357,23 +359,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <2>; /* port number */
-			reg = <d 40000000 20000000	/* Config space access */
-			       c 10002000 00001000>;	/* Registers */
-			dcr-reg = <140 020>;
-			sdr-base = <370>;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000f 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80020000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <30 3f>;
+			bus-range = <0x30 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -383,12 +385,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 8 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 9 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 a 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 b 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 48c9a6e71f1a..dececc4b5ff2 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,kilauea";
 	compatible = "amcc,kilauea";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405ex", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -89,72 +91,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405ex";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -162,68 +164,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
 			};
 
 			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <1>;
+				linux,network-index = <0x1>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600a00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <c0000000 20000000	/* Config space access */
-			       ef001000 00001000>;	/* Registers */
-			dcr-reg = <060 020>;
-			sdr-base = <440>;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 98000000 0 08000000
-				  01000000 0 00000000 e0010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 b 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 c 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 d 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index f869ce3ca0b7..49737589ffc8 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;		/* From U-boot */
 			bus-frequency = <0>;			/* From U-boot */
 			clock-frequency = <0>;			/* From U-boot */
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -58,16 +59,16 @@
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
 			reg = <0x2000 0x1000>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;		/* 32 bytes */
 			cache-size = <0x40000>;			/* L2, 256K */
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			interrupts = <0x10 0x2>;
 		};
 
@@ -78,10 +79,51 @@
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {					/* For TSECs */
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -89,13 +131,13 @@
 			reg = <0x24520 0x20>;
 
 			PHY1: ethernet-phy@1 {
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY2: ethernet-phy@2 {
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
@@ -109,7 +151,7 @@
 			/* Mac address filled in by bootwrapper */
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			phy-handle = <&PHY1>;
 		};
 
@@ -121,11 +163,11 @@
 			/* Mac address filled in by bootwrapper */
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			phy-handle = <&PHY2>;
 		};
 
-		MPIC: pic@40000 {
+		mpic: pic@40000 {
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -164,7 +206,7 @@
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupts = <0x2e 0x2>;
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
 			};
@@ -202,7 +244,7 @@
 				fsl,mdc-pin = <25>;
 
 				PHY0: ethernet-phy@0 {
-					interrupt-parent = <&MPIC>;
+					interrupt-parent = <&mpic>;
 					reg = <0x0>;
 					device_type = "ethernet-phy";
 				};
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 84cc5e72ddd8..945508c7e7d8 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,makalu";
 	compatible = "amcc,makalu";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405ex", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -89,72 +91,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405ex";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -162,68 +164,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <0000003f>;	/* Start at 6 */
+				phy-map = <0x0000003f>;	/* Start at 6 */
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
 			};
 
 			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <1>;
+				linux,network-index = <0x1>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600a00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <c0000000 20000000	/* Config space access */
-			       ef001000 00001000>;	/* Registers */
-			dcr-reg = <060 020>;
-			sdr-base = <440>;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 98000000 0 08000000
-				  01000000 0 00000000 e0010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 b 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 c 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 d 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 94ad7b2b241e..1f9036c317b4 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -1,7 +1,7 @@
 /*
- * MPC5121E MDS Device Tree Source
+ * MPC5121E ADS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -17,6 +17,10 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		pci = &pci;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,8 +43,41 @@
 		reg = <0x00000000 0x10000000>;	// 256MB at 0
 	};
 
+	mbx@20000000 {
+		compatible = "fsl,mpc5121-mbx";
+		reg = <0x20000000 0x4000>;
+		interrupts = <66 0x8>;
+		interrupt-parent = < &ipic >;
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x20000>;		// 128K at 0x30000000
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;	// 1M at 0x40000000
+		interrupts = <6 8>;
+		interrupt-parent = < &ipic >;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <1>;
+		// ADS has two Hynix 512MB Nand flash chips in a single
+		// stacked package .
+		chips = <2>;
+		nand0@0 {
+			label = "nand0";
+			reg = <0x00000000 0x02000000>; 	// first 32 MB of chip 0
+		};
+		nand1@20000000 {
+			label = "nand1";
+			reg = <0x20000000 0x02000000>; 	// first 32 MB of chip 1
+		};
+	};
+
 	localbus@80000020 {
-		compatible = "fsl,mpc5121ads-localbus";
+		compatible = "fsl,mpc5121-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		reg = <0x80000020 0x40>;
@@ -51,14 +88,51 @@
 		flash@0,0 {
 			compatible = "cfi-flash";
 			reg = <0 0x0 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			bank-width = <4>;
-			device-width = <1>;
+			device-width = <2>;
+			protected@0 {
+				label = "protected";
+				reg = <0x00000000 0x00040000>;  // first sector is protected
+				read-only;
+			};
+			filesystem@40000 {
+				label = "filesystem";
+				reg = <0x00040000 0x03c00000>;  // 60M for filesystem
+			};
+			kernel@3c40000 {
+				label = "kernel";
+				reg = <0x03c40000 0x00280000>;  // 2.5M for kernel
+			};
+			device-tree@3ec0000 {
+				label = "device-tree";
+				reg = <0x03ec0000 0x00040000>;  // one sector for device tree
+			};
+			u-boot@3f00000 {
+				label = "u-boot";
+				reg = <0x03f00000 0x00100000>;  // 1M for u-boot
+				read-only;
+			};
 		};
 
 		board-control@2,0 {
 			compatible = "fsl,mpc5121ads-cpld";
 			reg = <0x2 0x0 0x8000>;
 		};
+
+		cpld_pic: pic@2,a {
+			compatible = "fsl,mpc5121ads-cpld-pic";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x2 0xa 0x5>;
+			interrupt-parent = < &ipic >;
+			// irq routing
+			//	all irqs but touch screen are routed to irq0 (ipic 48)
+			//	touch screen is statically routed to irq1 (ipic 17)
+			//	so don't use it here
+			interrupts = <48 0x8>;
+		};
 	};
 
 	soc@80000000 {
@@ -85,38 +159,252 @@
 			reg = <0xc00 0x100>;
 		};
 
-		// 512x PSCs are not 52xx PSCs compatible
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		pmc@1000{  //Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+			interrupt-parent = < &ipic >;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		mscan@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			cell-index = <0>;
+			interrupts = <12 0x8>;
+			interrupt-parent = < &ipic >;
+			reg = <0x1300 0x80>;
+		};
+
+		mscan@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			cell-index = <1>;
+			interrupts = <13 0x8>;
+			interrupt-parent = < &ipic >;
+			reg = <0x1380 0x80>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <0>;
+			reg = <0x1700 0x20>;
+			interrupts = <9 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <1>;
+			reg = <0x1720 0x20>;
+			interrupts = <10 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <2>;
+			reg = <0x1740 0x20>;
+			interrupts = <11 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu", "fsl-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy: ethernet-phy@0 {
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@2800 {
+			device_type = "network";
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy >;
+			fsl,align-tx-packets = <4>;
+		};
+
+		// 5121e has two dr usb modules
+		// mpc5121_ads only uses USB0
+
+		// USB1 using external ULPI PHY
+		//usb@3000 {
+		//	compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+		//	reg = <0x3000 0x1000>;
+		//	#address-cells = <1>;
+		//	#size-cells = <0>;
+		//	interrupt-parent = < &ipic >;
+		//	interrupts = <43 0x8>;
+		//	dr_mode = "otg";
+		//	phy_type = "ulpi";
+		//	port1;
+		//};
+
+		// USB0 using internal UTMI PHY
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+			reg = <0x4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = < &ipic >;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			port0;
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		pata@10200 {
+			compatible = "fsl,mpc5121-pata";
+			reg = <0x10200 0x100>;
+			interrupts = <5 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		// 512x PSCs are not 52xx PSC compatible
 		// PSC3 serial port A aka ttyPSC0
 		serial@11300 {
 			device_type = "serial";
-			compatible = "fsl,mpc5121-psc-uart";
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 			// Logical port assignment needed until driver
 			// learns to use aliases
 			port-number = <0>;
 			cell-index = <3>;
 			reg = <0x11300 0x100>;
-			interrupts = <0x28 0x8>; // actually the fifo irq
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
+			rx-fifo-size = <16>;
+			tx-fifo-size = <16>;
 		};
 
 		// PSC4 serial port B aka ttyPSC1
 		serial@11400 {
 			device_type = "serial";
-			compatible = "fsl,mpc5121-psc-uart";
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 			// Logical port assignment needed until driver
 			// learns to use aliases
 			port-number = <1>;
 			cell-index = <4>;
 			reg = <0x11400 0x100>;
-			interrupts = <0x28 0x8>; // actually the fifo irq
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
+			rx-fifo-size = <16>;
+			tx-fifo-size = <16>;
 		};
 
-		pscsfifo@11f00 {
+		// PSC5 in ac97 mode
+		ac97@11500 {
+			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
+			cell-index = <5>;
+			reg = <0x11500 0x100>;
+			interrupts = <40 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl,mode = "ac97-slave";
+			rx-fifo-size = <384>;
+			tx-fifo-size = <384>;
+		};
+
+		pscfifo@11f00 {
 			compatible = "fsl,mpc5121-psc-fifo";
 			reg = <0x11f00 0x100>;
-			interrupts = <0x28 0x8>;
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
 		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma2";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci: pci@80008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				// IDSEL 0x15 - Slot 1 PCI
+				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
+				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
+				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
+				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
+
+				// IDSEL 0x16 - Slot 2 MiniPCI
+				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
+				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
+
+				// IDSEL 0x17 - Slot 3 MiniPCI
+				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
+				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
+				>;
+		interrupt-parent = < &ipic >;
+		interrupts = <1 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x80008500 0x100>;
+		compatible = "fsl,mpc5121-pci";
+		device_type = "pci";
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 4936349b87cd..2544f3ecd6e9 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -18,6 +18,16 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells =<0>;
@@ -78,7 +88,7 @@
 
 		};
 
-		ethernet@6200 {
+		enet0: ethernet@6200 {
 			linux,network-index = <0>;
 			#size-cells = <0>;
 			device_type = "network";
@@ -91,7 +101,7 @@
 			phy-handle = <&phy8>;
 		};
 
-		ethernet@6600 {
+		enet1: ethernet@6600 {
 			linux,network-index = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -105,7 +115,7 @@
 			phy-handle = <&phy9>;
 		};
 
-		serial@7808 {
+		serial0: serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x7808 0x200>;
@@ -114,7 +124,7 @@
 			interrupt-parent = <&mpic>;
 		};
 
-		serial@7c08 {
+		serial1: serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x7c08 0x200>;
@@ -124,16 +134,14 @@
 		};
 
 	  	mpic: pic@7400 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x7400 0x400>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                       	big-endian;
 		};
-		pci@1000 {
+		pci0: pci@1000 {
 			compatible = "tsi108-pci";
 			device_type = "pci";
 			#interrupt-cells = <1>;
@@ -186,8 +194,4 @@
 			};
 		};
 	};
-	chosen {
-		linux,stdout-path = "/tsi108@c0000000/serial@7808";
-	};
-
 };
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 46e2da30c3dd..2a1929acaabd 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -217,6 +217,17 @@
 				linux,network-index = <1>;
 				fsl,cpm-command = <0x16200300>;
 			};
+
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		PIC: interrupt-controller@10c00 {
@@ -226,22 +237,15 @@
 			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
 		};
 
-/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "fsl,mpc8272-talitos-sec2",
-			             "fsl,talitos-sec2",
-			             "fsl,talitos",
-			             "talitos";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 8>;
+			compatible = "fsl,sec1.0";
+			reg = <0x40000 0x13000>;
+			interrupts = <47 0x8>;
 			interrupt-parent = <&PIC>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x7e>;
-/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <0x1010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x1010415>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index e1f0dca8ac39..2a94ae0dc8b8 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -109,18 +109,38 @@
 			reg = <0x200 0x100>;
 		};
 
-		i2c@3000 {
+		sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x03000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			crypto@30000 {
+				compatible = "fsl,sec2.2", "fsl,sec2.1",
+				             "fsl,sec2.0";
+				reg = <0x30000 0x10000>;
+				interrupts = <11 0x8>;
+				interrupt-parent = <&ipic>;
+				fsl,num-channels = <1>;
+				fsl,channel-fifo-len = <24>;
+				fsl,exec-units-mask = <0x4c>;
+				fsl,descriptor-types-mask = <0x0122003f>;
 			};
 		};
 
@@ -144,6 +164,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
@@ -153,37 +208,44 @@
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
 			phy_type = "utmi_wide";
+			sleep = <&pmc 0x00300000>;
 		};
 
-		mdio@24520 {
+		enet0: ethernet@24000 {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&ipic>;
-				interrupts = <19 0x8>;
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-			phy4: ethernet-phy@4 {
-				interrupt-parent = <&ipic>;
-				interrupts = <20 0x8>;
-				reg = <0x4>;
-				device_type = "ethernet-phy";
-			};
-		};
+			#size-cells = <1>;
+			sleep = <&pmc 0x20000000>;
+			ranges;
 
-		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
-			compatible = "gianfar";
+			compatible = "gianfar", "simple-bus";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 0x8 36 0x8 35 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = < &phy1 >;
+			fsl,magic-packet;
+
+			mdio@24520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x24520 0x20>;
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <19 0x8>;
+					reg = <0x1>;
+					device_type = "ethernet-phy";
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&ipic>;
+					interrupts = <20 0x8>;
+					reg = <0x4>;
+					device_type = "ethernet-phy";
+				};
+			};
 		};
 
 		enet1: ethernet@25000 {
@@ -196,6 +258,8 @@
 			interrupts = <34 0x8 33 0x8 32 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = < &phy4 >;
+			sleep = <&pmc 0x10000000>;
+			fsl,magic-packet;
 		};
 
 		serial0: serial@4500 {
@@ -218,20 +282,6 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
-		};
-
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
@@ -245,36 +295,119 @@
 			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 8>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+			/* Remove this (or change to "okay") if you have
+			 * a REVA3 or later board, if you apply one of the
+			 * workarounds listed in section 8.5 of the board
+			 * manual, or if you are adapting this device tree
+			 * to a different board.
+			 */
+			status = "fail";
+		};
+
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 8 79 8 85 8 73 8>;
+			interrupt-parent = <&ipic>;
+		};
 	};
 
-	pci0: pci@e0008500 {
-		cell-index = <1>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x0E -mini PCI */
-				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
-				/* IDSEL 0x0F - PCI slot */
-				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
+	sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00010000>;
+		ranges;
+
+		pci0: pci@e0008500 {
+			cell-index = <1>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+					/* IDSEL 0x0E -mini PCI */
+					 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+					/* IDSEL 0x0F - PCI slot */
+					 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <66 0x8>;
+			bus-range = <0x0 0x0>;
+			ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+				  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+				  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+			clock-frequency = <66666666>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <0xe0008500 0x100>;
+			compatible = "fsl,mpc8349-pci";
+			device_type = "pci";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0xe00082a8 4>;
+			ranges = <0 0xe0008100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <0>;
+			};
+
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x80 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <1>;
+			};
+
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x100 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <2>;
+			};
+
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <3>;
+			};
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index d7a1ececa30f..f704513fb930 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -132,6 +132,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -206,17 +241,16 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+				     "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3ab0abf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 539e02fb3526..7345743d3d96 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -114,18 +114,50 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 179c81c6a7ac..e74c045a0f8c 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -68,7 +68,7 @@
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <14 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 			dfsrr;
 		};
 
@@ -79,7 +79,7 @@
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 		};
 
 		serial1: serial@4600 {
@@ -89,24 +89,56 @@
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
-			interrupt-parent = <&pic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
-		pic:pic@700 {
+		ipic:pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
@@ -240,13 +272,13 @@
 			compatible = "fsl,ucc-mdio";
 
 			phy00:ethernet-phy@00 {
-				interrupt-parent = <&pic>;
+				interrupt-parent = <&ipic>;
 				interrupts = <0>;
 				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy04:ethernet-phy@04 {
-				interrupt-parent = <&pic>;
+				interrupt-parent = <&ipic>;
 				interrupts = <0>;
 				reg = <0x4>;
 				device_type = "ethernet-phy";
@@ -261,7 +293,7 @@
 			reg = <0x80 0x80>;
 			big-endian;
 			interrupts = <32 0x8 33 0x8>; //high:32 low:33
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 		};
 	};
 
@@ -270,21 +302,21 @@
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x10 AD16 (USB) */
-				 0x8000 0x0 0x0 0x1 &pic 17 0x8
+				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
 
 				/* IDSEL 0x11 AD17 (Mini1)*/
-				 0x8800 0x0 0x0 0x1 &pic 18 0x8
-				 0x8800 0x0 0x0 0x2 &pic 19 0x8
-				 0x8800 0x0 0x0 0x3 &pic 20 0x8
-				 0x8800 0x0 0x0 0x4 &pic 48 0x8
+				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
 
 				/* IDSEL 0x12 AD18 (PCI/Mini2) */
-				 0x9000 0x0 0x0 0x1 &pic 19 0x8
-				 0x9000 0x0 0x0 0x2 &pic 20 0x8
-				 0x9000 0x0 0x0 0x3 &pic 48 0x8
-				 0x9000 0x0 0x0 0x4 &pic 17 0x8>;
+				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
 
-		interrupt-parent = <&pic>;
+		interrupt-parent = <&ipic>;
 		interrupts = <66 0x8>;
 		bus-range = <0x0 0x0>;
 		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 9426676b0b7d..8dfab5662585 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -93,6 +93,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@22000 {
 			compatible = "fsl-usb2-mph";
 			reg = <0x22000 0x1000>;
@@ -178,16 +213,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index f81d735e6e72..49ca3497eefb 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -91,6 +91,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,16 +186,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0199c5c548d8..ba586cb7afbb 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -103,6 +103,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI or SERIAL) are only types supported for MPH */
 		/* port = 0 or 1 */
 		usb@22000 {
@@ -193,20 +228,15 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev2.0,
-			 * we need runtime fixup for >2.0 */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 8160ff24e87e..3701dae1ee02 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -118,18 +118,50 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
new file mode 100644
index 000000000000..8acd1d6577f2
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -0,0 +1,432 @@
+/*
+ * MPC8360E RDK Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8360rdk";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* filled by u-boot */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* filled by u-boot */
+		reg = <0 0>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
+			     "simple-bus";
+		ranges = <0 0xe0000000 0x200000>;
+		reg = <0xe0000000 0x200>;
+		/* filled by u-boot */
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <16 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			interrupts = <9 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		serial1: serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			interrupts = <10 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2-crypto";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 8>;
+			interrupt-parent = <&ipic>;
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x7e>;
+			/*
+			 * desc mask is for rev1.x, we need runtime fixup
+			 * for >=2.x
+			 */
+			descriptor-types-mask = <0x1010ebf>;
+		};
+
+		ipic: interrupt-controller@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+		};
+
+		qe_pio_b: gpio-controller@1418 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1418 0x18>;
+			gpio-controller;
+		};
+
+		qe_pio_e: gpio-controller@1460 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1460 0x18>;
+			gpio-controller;
+		};
+
+		qe@100000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "qe";
+			compatible = "fsl,qe", "simple-bus";
+			ranges = <0 0x100000 0x100000>;
+			reg = <0x100000 0x480>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+			bus-frequency = <0>;
+			brg-frequency = <0>;
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0 0x10000 0xc000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+						     "fsl,cpm-muram-data";
+					reg = <0 0xc000>;
+				};
+			};
+
+			timer@440 {
+				compatible = "fsl,mpc8360-qe-gtm",
+					     "fsl,qe-gtm", "fsl,gtm";
+				reg = <0x440 0x40>;
+				interrupts = <12 13 14 15>;
+				interrupt-parent = <&qeic>;
+				/* filled by u-boot */
+				clock-frequency = <0>;
+			};
+
+			spi@4c0 {
+				cell-index = <0>;
+				compatible = "fsl,spi";
+				reg = <0x4c0 0x40>;
+				interrupts = <2>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			spi@500 {
+				cell-index = <1>;
+				compatible = "fsl,spi";
+				reg = <0x500 0x40>;
+				interrupts = <1>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			enet0: ucc@2000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk9";
+				phy-handle = <&phy2>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet1: ucc@3000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <2>;
+				reg = <0x3000 0x200>;
+				interrupts = <33>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk4";
+				phy-handle = <&phy4>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet2: ucc@2600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <7>;
+				reg = <0x2600 0x200>;
+				interrupts = <42>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk20";
+				tx-clock-name = "clk19";
+				phy-handle = <&phy1>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet3: ucc@3200 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <4>;
+				reg = <0x3200 0x200>;
+				interrupts = <35>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk8";
+				tx-clock-name = "clk7";
+				phy-handle = <&phy3>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			mdio@2120 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,ucc-mdio";
+				reg = <0x2120 0x18>;
+
+				phy1: ethernet-phy@1 {
+					device_type = "ethernet-phy";
+					compatible = "national,DP83848VV";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					device_type = "ethernet-phy";
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					device_type = "ethernet-phy";
+					compatible = "national,DP83848VV";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					device_type = "ethernet-phy";
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <4>;
+				};
+			};
+
+			serial2: ucc@2400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x2400 0x200>;
+				cell-index = <5>;
+				port-number = <0>;
+				rx-clock-name = "brg7";
+				tx-clock-name = "brg8";
+				interrupts = <40>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			serial3: ucc@3400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x3400 0x200>;
+				cell-index = <6>;
+				port-number = <1>;
+				rx-clock-name = "brg13";
+				tx-clock-name = "brg14";
+				interrupts = <41>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			qeic: interrupt-controller@80 {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				compatible = "fsl,qe-ic";
+				interrupt-controller;
+				reg = <0x80 0x80>;
+				big-endian;
+				interrupts = <32 8 33 8>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xff800000 0x0800000
+			  1 0 0x60000000 0x0001000
+			  2 0 0x70000000 0x4000000>;
+
+		flash@0,0 {
+			compatible = "intel,PC28F640P30T85", "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		display@2,0 {
+			device_type = "display";
+			compatible = "fujitsu,MB86277", "fujitsu,mint";
+			reg = <2 0 0x4000000>;
+			fujitsu,sh3;
+			little-endian;
+			/* filled by u-boot */
+			address = <0>;
+			depth = <0>;
+			width = <0>;
+			height = <0>;
+			linebytes = <0>;
+			/* linux,opened; - added by uboot */
+		};
+	};
+
+	pci0: pci@e0008500 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
+		reg = <0xe0008500 0x100>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
+		interrupts = <66 8>;
+		interrupt-parent = <&ipic>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
+				 0xa000 0 0 1 &ipic 18 8
+				 0xa000 0 0 2 &ipic 19 8
+
+				 /* PCI1 IDSEL 0x15 AD21 */
+				 0xa800 0 0 1 &ipic 19 8
+				 0xa800 0 0 2 &ipic 20 8
+				 0xa800 0 0 3 &ipic 21 8
+				 0xa800 0 0 4 &ipic 18 8>;
+		/* filled by u-boot */
+		bus-range = <0 0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index fea592574004..0a700cb5f611 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -233,41 +233,6 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
-		};
-
-		sdhc@2e000 {
-			model = "eSDHC";
-			compatible = "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <42 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
 		dma@82a8 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -303,6 +268,40 @@
 			};
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sdhc@2e000 {
+			model = "eSDHC";
+			compatible = "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <42 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index f3083c779b66..ed137aa83d5f 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 1d6ea080ad73..29c8c76a58f7 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -157,6 +157,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -234,16 +269,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 0e872a60e091..34a7f2f935e1 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 6f78a9fd9826..d641a8985ea3 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -157,6 +157,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -234,16 +269,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 1eb8defaff6f..e4d7030d50e5 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
new file mode 100644
index 000000000000..02cfa24a1695
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -0,0 +1,432 @@
+/*
+ * MPC8536 DS Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 00000000>;	// Filled by U-Boot
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xffe00000 0x100000>;
+		reg = <0xffe00000 0x1000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8536-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 0x2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8536-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
+			reg = <0x21300 4>;
+			ranges = <0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <14 0x2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <15 0x2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <16 0x2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <17 0x2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 0x1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 0x1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		usb@22000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@26000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@2b000 {
+			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+			reg = <0x2b000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <60 0x2>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <74 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <41 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci0: pci@ffe08000 {
+		cell-index = <0>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1
+			0x8800 0 0 2 &mpic 2 1
+			0x8800 0 0 3 &mpic 3 1
+			0x8800 0 0 4 &mpic 4 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 0x2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe08000 0x1000>;
+	};
+
+	pci1: pcie@ffe09000 {
+		cell-index = <1>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe09000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xffc20000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0x98000000
+				  0x02000000 0 0x98000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		cell-index = <2>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe0a000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xffc10000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0x90000000
+				  0x02000000 0 0x90000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe0b000 {
+		cell-index = <3>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe0b000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xffc30000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <27 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 8 1
+			0000 0 0 2 &mpic 9 1
+			0000 0 0 3 &mpic 10 1
+			0000 0 0 4 &mpic 11 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 18033ed0b535..f2273a872b11 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +84,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -165,14 +207,12 @@
 			interrupt-parent = <&mpic>;
 		};
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 663c7c50ca45..c4469f19ff82 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8541-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +84,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -147,15 +189,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 6a0d8db96d97..7d3829d3495e 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -41,6 +41,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -65,7 +66,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8544-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -209,15 +210,40 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 4811b8107415..d84466bb7eca 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -45,6 +45,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -68,7 +69,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -99,6 +100,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -207,15 +249,24 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index b025c566c10d..e03a78006283 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8555-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +84,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -147,15 +189,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 0cc16ab305d1..ba8159de040b 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -64,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -73,6 +73,47 @@
 			interrupts = <16 2>;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -134,6 +175,7 @@
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index a025a8ededc5..9c30a34821dc 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -42,6 +42,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -70,7 +71,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8568-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -106,6 +107,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -189,27 +231,23 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0xf000>;
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <45 2>;
 			interrupt-parent = <&mpic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0xfe>;
-			descriptor-types-mask = <0x12b0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
 		};
 
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		par_io@e0100 {
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 66f27ab613a2..08c61e3daecc 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -42,6 +42,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 
 		PowerPC,8572@1 {
@@ -54,6 +55,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -84,7 +86,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,mpc8572-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -115,6 +117,88 @@
 			dfsrr;
 		};
 
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -221,15 +305,41 @@
 			fsl,has-rstcr;
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index fa9b6bbeb5af..666185f59459 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -172,14 +172,28 @@
 		};
 
 		mpic: interrupt-controller@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {
@@ -349,7 +363,7 @@
 			0xe000 0 0 4 &mpic 1 1
 
 			/* IDSEL 0x1f */
-			0xf800 0 0 1 &mpic 3 0
+			0xf800 0 0 1 &mpic 3 2
 			0xf800 0 0 2 &mpic 0 1
 		>;
 
@@ -374,6 +388,20 @@
 					  0x01000000 0x0 0x00000000
 					  0x01000000 0x0 0x00000000
 					  0x0 0x00100000>;
+
+				isa@1e {
+					device_type = "isa";
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0 0 0 0>;
+					ranges = <1 0 0x01000000 0 0
+						  0x00001000>;
+
+					rtc@70 {
+						compatible = "pnpPNP,b00";
+						reg = <1 0x70 2>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 1e4bfe9cadb9..ae08761ffff1 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -134,6 +134,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -239,14 +280,12 @@
 		};
 
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 
 		global-utilities@e0000 {
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index 765e43c997da..bd700651f360 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -171,6 +171,17 @@
 				fsl,cpm-command = <0000>;
 				linux,network-index = <1>;
 			};
+
+			i2c@860 {
+				compatible = "fsl,mpc866-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 9895043722b9..b123e9f7a5a8 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -215,6 +215,17 @@
 				fsl,cpm-command = <0x80>;
 				linux,network-index = <2>;
 			};
+
+			i2c@860 {
+				compatible = "fsl,mpc885-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts
index 379ded282d5e..96ba5b512afe 100644
--- a/arch/powerpc/boot/dts/ps3.dts
+++ b/arch/powerpc/boot/dts/ps3.dts
@@ -18,6 +18,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/dts-v1/;
+
 / {
 	model = "SonyPS3";
 	compatible = "sony,ps3";
@@ -34,7 +36,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0 0>;
+		reg = <0x00000000 0x00000000 0x00000000 0x00000000>;
 	};
 
 	/*
@@ -55,14 +57,14 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			reg = <0>;
-			ibm,ppc-interrupt-server#s = <0 1>;
+			reg = <0x00000000>;
+			ibm,ppc-interrupt-server#s = <0x0 0x1>;
 			clock-frequency = <0>;
 			timebase-frequency = <0>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
-			i-cache-line-size = <80>;
-			d-cache-line-size = <80>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <128>;
+			d-cache-line-size = <128>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
index 6a8fa7089ea2..9684c80e4093 100644
--- a/arch/powerpc/boot/dts/rainier.dts
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -12,12 +12,14 @@
  *
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,rainier";
 	compatible = "amcc,rainier";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GRx";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -49,14 +51,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -78,22 +80,22 @@
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -105,80 +107,80 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440grx", "ibm,dma-4xx";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 		  	compatible = "ibm,opb-440grx", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 1 00000000 80000000
-			          80000000 1 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440grx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl256n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "Kernel";
-						reg = <0 180000>;
+						reg = <0x00000000 0x00180000>;
 					};
 					partition@180000 {
 						label = "ramdisk";
-						reg = <180000 200000>;
+						reg = <0x00180000 0x00200000>;
 					};
 					partition@380000 {
 						label = "file system";
-						reg = <380000 3aa0000>;
+						reg = <0x00380000 0x03aa0000>;
 					};
 					partition@3e20000 {
 						label = "kozio";
-						reg = <3e20000 140000>;
+						reg = <0x03e20000 0x00140000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 
@@ -187,69 +189,69 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440grx", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601000 {
 				compatible = "ibm,rgmii-440grx", "ibm,rgmii";
-				reg = <ef601000 8>;
+				reg = <0xef601000 0x00000008>;
 				has-mdio;
 			};
 
@@ -257,23 +259,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 				rgmii-device = <&RGMII0>;
@@ -286,23 +288,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 				rgmii-device = <&RGMII0>;
@@ -319,24 +321,25 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
 			primary;
-			reg = <1 eec00000 8	/* Config space access */
-			       1 eed00000 4	/* IACK */
-			       1 eed00000 4	/* Special cycle */
-			       1 ef400000 40>;	/* Internal registers */
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 10000000
-				01000000 0 00000000 1 e8000000 0 00100000>;
+			ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000
+				0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000
+				0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/sam440ep.dts b/arch/powerpc/boot/dts/sam440ep.dts
new file mode 100644
index 000000000000..f0663be10421
--- /dev/null
+++ b/arch/powerpc/boot/dts/sam440ep.dts
@@ -0,0 +1,293 @@
+/*
+ * Device Tree Source for ACube Sam440ep  based off bamboo.dts code 
+ * original copyrights below 
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Modified from bamboo.dts for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "acube,sam440ep";
+	compatible = "acube,sam440ep";
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 4 0x1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 2>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 2>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 10 4
+					/*RXEOB*/ 1 &UIC0 11 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+		  	ranges = <0x00000000 0 0x00000000 0x80000000
+			          0x80000000 0 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <7 4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 8>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <0x1c200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0 4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 8>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <1 4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 8>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <3 4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 8>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <4 4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <0>;
+				reg = <0xef600700 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+				rtc@68 {
+					compatible = "stm,m41t80";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <5>;
+				reg = <0xef600800 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <7 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0xc>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 4 0x1d 4>;
+				reg = <0xef600e00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				linux,network-index = <1>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 4 0x1f 4>;
+				reg = <0xef600f00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x80>;
+				interrupts = <8 4 9 4>;
+				interrupt-parent = <&UIC1>;
+			};	
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0 0xeec00000 8	   /* Config space access */
+			       0 0xeed00000 4	   /* IACK */
+			       0 0xeed00000 4	   /* Special cycle */
+			       0 0xef400000 0x40>; /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 3839d4b7d6a7..45f789b56709 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -95,6 +95,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI or SERIAL) are only types supported for MPH */
 		/* port = 0 or 1 */
 		usb@22000 {
@@ -186,19 +221,15 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev2.0,
-			 * we need runtime fixup for >2.0 */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 22d967178fe9..333552b4e90d 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -44,6 +44,7 @@
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -161,7 +162,7 @@
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
@@ -192,6 +193,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -262,15 +304,24 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#size-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 0476802fba60..db3632ef9888 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -43,6 +43,7 @@
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -66,7 +67,7 @@
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8560-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
@@ -97,6 +98,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -155,8 +197,8 @@
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#size-cells = <0>;
 			#interrupt-cells = <2>;
+			compatible = "chrp,open-pic";
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
 		};
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index 3eebeec157b3..9652456158fb 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -151,6 +151,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 72d67564bdfc..72d15f075d34 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -12,12 +12,14 @@
  *
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,sequoia";
 	compatible = "amcc,sequoia";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EPx";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -49,14 +51,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -78,22 +80,22 @@
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -105,44 +107,44 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440epx", "ibm,dma-4xx";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		USB1: usb@e0000400 {
 			compatible = "ohci-be";
-			reg = <0 e0000400 60>;
+			reg = <0x00000000 0xe0000400 0x00000060>;
 			interrupt-parent = <&UIC0>;
-			interrupts = <15 8>;
+			interrupts = <0x15 0x8>;
 		};
 
 		USB0: ehci@e0000300 {
 			compatible = "ibm,usb-ehci-440epx", "usb-ehci";
 			interrupt-parent = <&UIC0>;
-			interrupts = <1a 4>;
-			reg = <0 e0000300 90 0 e0000390 70>;
+			interrupts = <0x1a 0x4>;
+			reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
 			big-endian;
 		};
 
@@ -150,50 +152,50 @@
 		  	compatible = "ibm,opb-440epx", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 1 00000000 80000000
-			          80000000 1 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440epx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl256n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "Kernel";
-						reg = <0 180000>;
+						reg = <0x00000000 0x00180000>;
 					};
 					partition@180000 {
 						label = "ramdisk";
-						reg = <180000 200000>;
+						reg = <0x00180000 0x00200000>;
 					};
 					partition@380000 {
 						label = "file system";
-						reg = <380000 3aa0000>;
+						reg = <0x00380000 0x03aa0000>;
 					};
 					partition@3e20000 {
 						label = "kozio";
-						reg = <3e20000 140000>;
+						reg = <0x03e20000 0x00140000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 
@@ -202,69 +204,69 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440epx", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601000 {
 				compatible = "ibm,rgmii-440epx", "ibm,rgmii";
-				reg = <ef601000 8>;
+				reg = <0xef601000 0x00000008>;
 				has-mdio;
 			};
 
@@ -272,23 +274,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 				rgmii-device = <&RGMII0>;
@@ -301,23 +303,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 				rgmii-device = <&RGMII0>;
@@ -334,10 +336,10 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
 			primary;
-			reg = <1 eec00000 8	/* Config space access */
-			       1 eed00000 4	/* IACK */
-			       1 eed00000 4	/* Special cycle */
-			       1 ef400000 40>;	/* Internal registers */
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
@@ -347,16 +349,16 @@
 			 * I/O              1 E800 0000     1 E800 FFFF     64KB
 			 * I/O              1 E880 0000     1 EBFF FFFF     56MB
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 40000000
-				01000000 0 00000000 1 e8000000 0 00010000
-				01000000 0 00000000 1 e8800000 0 03800000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
index 5893816c0bce..eab680ce10da 100644
--- a/arch/powerpc/boot/dts/storcenter.dts
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -95,6 +95,7 @@
 
 		mpic: interrupt-controller@40000 {
 			#interrupt-cells = <2>;
+			#address-cells = <0>;
 			device_type = "open-pic";
 			compatible = "chrp,open-pic";
 			interrupt-controller;
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index f81fd7fdb29e..fcd1db6ca0a8 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -38,6 +38,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -62,7 +63,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -82,6 +83,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -131,6 +173,7 @@
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index e808e1c5593a..058438f9629b 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -10,12 +10,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,taishan";
 	compatible = "amcc,taishan";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC2;
@@ -31,13 +33,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GX";
-			reg = <0>;
-			clock-frequency = <2FAF0800>; // 800MHz
+			reg = <0x00000000>;
+			clock-frequency = <800000000>; // 800MHz
 			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <8000>; /* 32 kB */
-			d-cache-size = <8000>; /* 32 kB */
+			i-cache-line-size = <50>;
+			d-cache-line-size = <50>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -45,7 +47,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; // Filled in by zImage
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
 	};
 
 
@@ -53,7 +55,7 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <200 009>;
+		dcr-reg = <0x200 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <01 4 00 4>; /* cascade - first non-critical */
+		interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
 		interrupt-parent = <&UICB0>;
 
 	};
@@ -77,11 +79,11 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <03 4 02 4>; /* cascade */
+		interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
 		interrupt-parent = <&UICB0>;
 	};
 
@@ -89,29 +91,29 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <2>; /* was 1 */
-		dcr-reg = <210 009>;
+		dcr-reg = <0x210 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <05 4 04 4>; /* cascade */
+		interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
 		interrupt-parent = <&UICB0>;
 	};
 
 
 	CPC0: cpc {
 		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0b0 003 0e0 010>;
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
 		// FIXME: anything else?
 	};
 
 	L2C0: l2c {
 		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
-		dcr-reg = <20 8			/* Internal SRAM DCR's */
-			   30 8>;		/* L2 cache DCR's */
-		cache-line-size = <20>;		/* 32 bytes */
-		cache-size = <40000>;		/* L2, 256K */
+		dcr-reg = <0x020 0x008			/* Internal SRAM DCR's */
+			   0x030 0x008>;		/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
 		interrupt-parent = <&UIC2>;
-		interrupts = <17 1>;
+		interrupts = <0x17 0x1>;
 	};
 
 	plb {
@@ -119,41 +121,41 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges;
-		clock-frequency = <9896800>; // 160MHz
+		clock-frequency = <160000000>; // 160MHz
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-440gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 			// FIXME: anything else?
 		};
 
 		SRAM0: sram {
 			compatible = "ibm,sram-440gp";
-			dcr-reg = <020 8 00a 1>;
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
 		};
 
 		DMA0: dma {
 			// FIXME: ???
 			compatible = "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <4>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					 /*RXEOB*/ 1 &UIC0 b 4
-					 /*SERR*/  2 &UIC1 0 4
-					 /*TXDE*/  3 &UIC1 1 4
-					 /*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
@@ -162,29 +164,56 @@
 			#size-cells = <1>;
 			/* Wish there was a nicer way of specifying a full 32-bit
 			   range */
-			ranges = <00000000 1 00000000 80000000
-				  80000000 1 80000000 80000000>;
-			dcr-reg = <090 00b>;
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
-			clock-frequency = <4C4B400>; // 80MHz
+			interrupts = <0x7 0x4>;
+			clock-frequency = <80000000>; // 80MHz
 
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440gx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
-				clock-frequency = <4C4B400>; // 80MHz
+				clock-frequency = <80000000>; // 80MHz
 
 				/* ranges property is supplied by zImage
 				 * based on firmware's configuration of the
 				 * EBC bridge */
 
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 				interrupt-parent = <&UIC1>;
 
-				/* TODO: Add other EBC devices */
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <4>;
+					device-width = <2>;
+					reg = <0x0 0x0 0x4000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x0 0x180000>;
+					};
+					partition@180000 {
+						label = "root";
+						reg = <0x180000 0x200000>;
+					};
+					partition@380000 {
+						label = "user";
+						reg = <0x380000 0x3bc0000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x3f40000 0x80000>;
+					};
+					partition@3fc0000 {
+						label = "u-boot";
+						reg = <0x3fc0000 0x40000>;
+					};
+				};
 			};
 
 
@@ -192,103 +221,103 @@
 			UART0: serial@40000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000200 8>;
-				virtual-reg = <e0000200>;
- 				clock-frequency = <A8C000>;
-				current-speed = <1C200>; /* 115200 */
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+ 				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@40000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000300 8>;
-				virtual-reg = <e0000300>;
-				clock-frequency = <A8C000>;
-				current-speed = <1C200>; /* 115200 */
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@40000400 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000400 14>;
+				reg = <0x40000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 			IIC1: i2c@40000500 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000500 14>;
+				reg = <0x40000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			GPIO0: gpio@40000700 {
 				/* FIXME */
 				compatible = "ibm,gpio-440gp";
-				reg = <40000700 20>;
+				reg = <0x40000700 0x00000020>;
 			};
 
 			ZMII0: emac-zmii@40000780 {
 				compatible = "ibm,zmii-440gx", "ibm,zmii";
-				reg = <40000780 c>;
+				reg = <0x40000780 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@40000790 {
 				compatible = "ibm,rgmii";
-				reg = <40000790 8>;
+				reg = <0x40000790 0x00000008>;
 			};
 
 			TAH0: emac-tah@40000b50 {
 				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <40000b50 30>;
+				reg = <0x40000b50 0x00000030>;
 			};
 
 			TAH1: emac-tah@40000d50 {
 				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <40000d50 30>;
+				reg = <0x40000d50 0x00000030>;
 			};
 
 			EMAC0: ethernet@40000800 {
-				unused = <1>;
+				unused = <0x1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <40000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
 		 	EMAC1: ethernet@40000900 {
-				unused = <1>;
+				unused = <0x1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <40000900 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
  				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
@@ -297,18 +326,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
-				interrupts = <0 4 1 4>;
-				reg = <40000c00 70>;
+				interrupts = <0x0 0x4 0x1 0x4>;
+				reg = <0x40000c00 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
 				mal-rx-channel = <2>;
 				cell-index = <2>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
  				zmii-device = <&ZMII0>;
@@ -321,18 +350,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
-				interrupts = <2 4 3 4>;
-				reg = <40000e00 70>;
+				interrupts = <0x2 0x4 0x3 0x4>;
+				reg = <0x40000e00 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
 				mal-rx-channel = <3>;
 				cell-index = <3>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000003>;
+				phy-map = <0x00000003>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
  				zmii-device = <&ZMII0>;
@@ -344,9 +373,9 @@
 
 			GPT0: gpt@40000a00 {
 				/* FIXME */
-				reg = <40000a00 d4>;
+				reg = <0x40000a00 0x000000d4>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <12 4 13 4 14 4 15 4 16 4>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
 			};
 
 		};
@@ -360,34 +389,34 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <2 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       2 0ed00000   4   /* Special cycles */
-			       2 0ec80000 100	/* Internal registers */
-			       2 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x00000002 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000   0x00000004   /* Special cycles */
+			       0x00000002 0x0ec80000 0x00000100	/* Internal registers */
+			       0x00000002 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 00000003 80000000 0 80000000
-				  01000000 0 00000000 00000002 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 1 &UIC0 17 8
-				0800 0 0 2 &UIC0 18 8
-				0800 0 0 3 &UIC0 19 8
-				0800 0 0 4 &UIC0 1a 8
+				0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
+				0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
+				0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
+				0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 1 &UIC0 18 8
-				1000 0 0 2 &UIC0 19 8
-				1000 0 0 3 &UIC0 1a 8
-				1000 0 0 4 &UIC0 17 8
+				0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
+				0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
+				0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
+				0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 773a68e00058..3008bf8830c1 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -70,6 +70,20 @@
 			fsl,has-wdt;
 		};
 
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			reg = <0x980 0x80>;
+		};
+
 		gpio@b00 {
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 1addb3ae719e..e1d260b9085e 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8540";
-	compatible = "tqm,8540", "tqm,85xx";
+	model = "tqc,tqm8540";
+	compatible = "tqc,tqm8540";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -64,7 +65,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -89,6 +90,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -177,6 +219,7 @@
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 9e01093f496e..d76441ec5dc7 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8541";
-	compatible = "tqm,8541", "tqm,85xx";
+	model = "tqc,tqm8541";
+	compatible = "tqc,tqm8541";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -39,6 +39,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -88,6 +89,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,12 +200,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
new file mode 100644
index 000000000000..64d2d5bbcdf1
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -0,0 +1,406 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8548@a0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xa0000000 0x100000>;
+		reg = <0xa0000000 0x1000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+			phy5: ethernet-phy@5 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <5>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@a0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xa0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xa3000000 0x00008000	// CAN (2 x i82527)
+			3 0x0 0xa3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@a0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xa0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xa2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@a000a000 {
+		cell-index = <2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xaf000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xa000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xb0000000 0x02000000 0
+			          0xb0000000 0 0x10000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
new file mode 100644
index 000000000000..2563112cabd3
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -0,0 +1,411 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8548@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+			phy5: ethernet-phy@5 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <5>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@e0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+			3 0x0 0xe3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@e000a000 {
+		cell-index = <2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xc0000000 0x02000000 0
+			          0xc0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index a20eb06c482f..6f7ea59c4846 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8555";
-	compatible = "tqm,8555", "tqm,85xx";
+	model = "tqc,tqm8555";
+	compatible = "tqc,tqm8555";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -39,6 +39,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -88,6 +89,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,12 +200,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index b9ac6c943b89..3fe35208907b 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -2,6 +2,7 @@
  * TQM 8560 Device Tree Source
  *
  * Copyright 2008 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -12,8 +13,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8560";
-	compatible = "tqm,8560", "tqm,85xx";
+	model = "tqc,tqm8560";
+	compatible = "tqc,tqm8560";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -40,6 +41,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -64,7 +66,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -89,6 +91,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -145,6 +188,7 @@
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
@@ -221,6 +265,70 @@
 		};
 	};
 
+	localbus@e0005000 {
+		compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
 	pci0: pci@e0008000 {
 		cell-index = <0>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts
new file mode 100644
index 000000000000..dc8e78e2dceb
--- /dev/null
+++ b/arch/powerpc/boot/dts/virtex440-ml507.dts
@@ -0,0 +1,296 @@
+/*
+ * This file supports the Xilinx ML507 board with the 440 processor.
+ * A reference design for the FPGA is provided at http://git.xilinx.com.
+ *
+ * (C) Copyright 2008 Xilinx, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,virtex440";
+	dcr-parent = <&ppc440_0>;
+	model = "testing";
+	DDR2_SDRAM: memory@0 {
+		device_type = "memory";
+		reg = < 0 0x10000000 >;
+	} ;
+	chosen {
+		bootargs = "console=ttyS0 ip=on root=/dev/ram";
+		linux,stdout-path = "/plb@0/serial@83e00000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <1>;
+		#size-cells = <0>;
+		ppc440_0: cpu@0 {
+			clock-frequency = <400000000>;
+			compatible = "PowerPC,440", "ibm,ppc440";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			dcr-access-method = "native";
+			dcr-controller ;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "PowerPC,440";
+			reg = <0>;
+			timebase-frequency = <400000000>;
+			xlnx,apu-control = <1>;
+			xlnx,apu-udi-0 = <0>;
+			xlnx,apu-udi-1 = <0>;
+			xlnx,apu-udi-10 = <0>;
+			xlnx,apu-udi-11 = <0>;
+			xlnx,apu-udi-12 = <0>;
+			xlnx,apu-udi-13 = <0>;
+			xlnx,apu-udi-14 = <0>;
+			xlnx,apu-udi-15 = <0>;
+			xlnx,apu-udi-2 = <0>;
+			xlnx,apu-udi-3 = <0>;
+			xlnx,apu-udi-4 = <0>;
+			xlnx,apu-udi-5 = <0>;
+			xlnx,apu-udi-6 = <0>;
+			xlnx,apu-udi-7 = <0>;
+			xlnx,apu-udi-8 = <0>;
+			xlnx,apu-udi-9 = <0>;
+			xlnx,dcr-autolock-enable = <1>;
+			xlnx,dcu-rd-ld-cache-plb-prio = <0>;
+			xlnx,dcu-rd-noncache-plb-prio = <0>;
+			xlnx,dcu-rd-touch-plb-prio = <0>;
+			xlnx,dcu-rd-urgent-plb-prio = <0>;
+			xlnx,dcu-wr-flush-plb-prio = <0>;
+			xlnx,dcu-wr-store-plb-prio = <0>;
+			xlnx,dcu-wr-urgent-plb-prio = <0>;
+			xlnx,dma0-control = <0>;
+			xlnx,dma0-plb-prio = <0>;
+			xlnx,dma0-rxchannelctrl = <0x1010000>;
+			xlnx,dma0-rxirqtimer = <0x3ff>;
+			xlnx,dma0-txchannelctrl = <0x1010000>;
+			xlnx,dma0-txirqtimer = <0x3ff>;
+			xlnx,dma1-control = <0>;
+			xlnx,dma1-plb-prio = <0>;
+			xlnx,dma1-rxchannelctrl = <0x1010000>;
+			xlnx,dma1-rxirqtimer = <0x3ff>;
+			xlnx,dma1-txchannelctrl = <0x1010000>;
+			xlnx,dma1-txirqtimer = <0x3ff>;
+			xlnx,dma2-control = <0>;
+			xlnx,dma2-plb-prio = <0>;
+			xlnx,dma2-rxchannelctrl = <0x1010000>;
+			xlnx,dma2-rxirqtimer = <0x3ff>;
+			xlnx,dma2-txchannelctrl = <0x1010000>;
+			xlnx,dma2-txirqtimer = <0x3ff>;
+			xlnx,dma3-control = <0>;
+			xlnx,dma3-plb-prio = <0>;
+			xlnx,dma3-rxchannelctrl = <0x1010000>;
+			xlnx,dma3-rxirqtimer = <0x3ff>;
+			xlnx,dma3-txchannelctrl = <0x1010000>;
+			xlnx,dma3-txirqtimer = <0x3ff>;
+			xlnx,endian-reset = <0>;
+			xlnx,generate-plb-timespecs = <1>;
+			xlnx,icu-rd-fetch-plb-prio = <0>;
+			xlnx,icu-rd-spec-plb-prio = <0>;
+			xlnx,icu-rd-touch-plb-prio = <0>;
+			xlnx,interconnect-imask = <0xffffffff>;
+			xlnx,mplb-allow-lock-xfer = <1>;
+			xlnx,mplb-arb-mode = <0>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-counter = <0x500>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-max-burst = <8>;
+			xlnx,mplb-native-dwidth = <0x80>;
+			xlnx,mplb-p2p = <0>;
+			xlnx,mplb-prio-dcur = <2>;
+			xlnx,mplb-prio-dcuw = <3>;
+			xlnx,mplb-prio-icu = <4>;
+			xlnx,mplb-prio-splb0 = <1>;
+			xlnx,mplb-prio-splb1 = <0>;
+			xlnx,mplb-read-pipe-enable = <1>;
+			xlnx,mplb-sync-tattribute = <0>;
+			xlnx,mplb-wdog-enable = <1>;
+			xlnx,mplb-write-pipe-enable = <1>;
+			xlnx,mplb-write-post-enable = <1>;
+			xlnx,num-dma = <1>;
+			xlnx,pir = <0xf>;
+			xlnx,ppc440mc-addr-base = <0>;
+			xlnx,ppc440mc-addr-high = <0xfffffff>;
+			xlnx,ppc440mc-arb-mode = <0>;
+			xlnx,ppc440mc-bank-conflict-mask = <0xc00000>;
+			xlnx,ppc440mc-control = <0xf810008f>;
+			xlnx,ppc440mc-max-burst = <8>;
+			xlnx,ppc440mc-prio-dcur = <2>;
+			xlnx,ppc440mc-prio-dcuw = <3>;
+			xlnx,ppc440mc-prio-icu = <4>;
+			xlnx,ppc440mc-prio-splb0 = <1>;
+			xlnx,ppc440mc-prio-splb1 = <0>;
+			xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>;
+			xlnx,ppcdm-asyncmode = <0>;
+			xlnx,ppcds-asyncmode = <0>;
+			xlnx,user-reset = <0>;
+			DMA0: sdma@80 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				dcr-reg = < 0x80 0x11 >;
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 9 2 0xa 2 >;
+			} ;
+		} ;
+	} ;
+	plb_v46_0: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.02.a", "simple-bus";
+		ranges ;
+		DIP_Switches_8Bit: gpio@81460000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81460000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&DMA0>;
+				local-mac-address = [ 02 00 00 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <1>;
+				xlnx,phy-type = <1>;
+				xlnx,phyaddr = <1>;
+				xlnx,rxcsum = <1>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0>;
+				xlnx,txcsum = <1>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		LEDs_Positions: gpio@81420000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81420000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		Push_Buttons_5Bit: gpio@81440000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81440000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		RS232_Uart_1: serial@83e00000 {
+			clock-frequency = <100000000>;
+			compatible = "xlnx,xps-uart16550-2.00.a", "ns16550";
+			current-speed = <0x2580>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 2 >;
+			reg = < 0x83e00000 0x10000 >;
+			reg-offset = <3>;
+			reg-shift = <2>;
+			xlnx,family = "virtex5";
+			xlnx,has-external-rclk = <0>;
+			xlnx,has-external-xin = <0>;
+			xlnx,is-a-16550 = <1>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+			reg = < 0xffff0000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,num-intr-inputs = <0xb>;
+		} ;
+		xps_timebase_wdt_1: xps-timebase-wdt@83a00000 {
+			compatible = "xlnx,xps-timebase-wdt-1.00.b";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 2 0 1 2 >;
+			reg = < 0x83a00000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,wdt-enable-once = <0>;
+			xlnx,wdt-interval = <0x1e>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <1>;
+			xlnx,gen1-assert = <1>;
+			xlnx,one-timer-only = <1>;
+			xlnx,trig0-assert = <1>;
+			xlnx,trig1-assert = <1>;
+		} ;
+	} ;
+}  ;
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index a328607c8f84..4a9f726ada13 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "ibm,walnut";
 	compatible = "ibm,walnut";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405GP";
-			reg = <0>;
-			clock-frequency = <bebc200>; /* Filled in by zImage */
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 9>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,63 +67,63 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL: mcmal {
 			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <1>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&UIC0>;
 			interrupts = <
-				b 4 /* TXEOB */
-				c 4 /* RXEOB */
-				a 4 /* SERR */
-				d 4 /* TXDE */
-				e 4 /* RXDE */>;
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <ef600000 ef600000 a00000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC: i2c@ef600500 {
 				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <ef600500 11>;
+				reg = <0xef600500 0x00000011>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			GPIO: gpio@ef600700 {
 				compatible = "ibm,gpio-405gp";
-				reg = <ef600700 20>;
+				reg = <0xef600700 0x00000020>;
 			};
 
 			EMAC: ethernet@ef600800 {
@@ -129,26 +131,26 @@
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
 				interrupts = <
-					f 4 /* Ethernet */
-					9 4 /* Ethernet Wake Up */>;
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
 				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <ef600800 70>;
+				reg = <0xef600800 0x00000070>;
 				mal-device = <&MAL>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 			};
 
 		};
 
 		EBC0: ebc {
 			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <012 2>;
+			dcr-reg = <0x012 0x002>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			/* The ranges property is supplied by the bootwrapper
@@ -158,18 +160,18 @@
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			sram@0,0 {
-				reg = <0 0 80000>;
+				reg = <0x00000000 0x00000000 0x00080000>;
 			};
 
 			flash@0,80000 {
 				compatible = "jedec-flash";
 				bank-width = <1>;
-				reg = <0 80000 80000>;
+				reg = <0x00000000 0x00080000 0x00080000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				partition@0 {
 					label = "OpenBIOS";
-					reg = <0 80000>;
+					reg = <0x00000000 0x00080000>;
 					read-only;
 				};
 			};
@@ -177,24 +179,24 @@
 			nvram@1,0 {
 				/* NVRAM and RTC */
 				compatible = "ds1743-nvram";
-				#bytes = <2000>;
-				reg = <1 0 2000>;
+				#bytes = <0x2000>;
+				reg = <0x00000001 0x00000000 0x00002000>;
 			};
 
 			keyboard@2,0 {
 				compatible = "intel,82C42PC";
-				reg = <2 0 2>;
+				reg = <0x00000002 0x00000000 0x00000002>;
 			};
 
 			ir@3,0 {
 				compatible = "ti,TIR2000PAG";
-				reg = <3 0 10>;
+				reg = <0x00000003 0x00000000 0x00000010>;
 			};
 
 			fpga@7,0 {
 				compatible = "Walnut-FPGA";
-				reg = <7 0 10>;
-				virtual-reg = <f0300005>;
+				reg = <0x00000007 0x00000000 0x00000010>;
+				virtual-reg = <0xf0300005>;
 			};
 		};
 
@@ -205,35 +207,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
 			primary;
-			reg = <eec00000 8	/* Config space access */
-			       eed80000 4	/* IACK */
-			       eed80000 4	/* Special cycle */
-			       ef480000 40>;	/* Internal registers */
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 80000000 0 20000000
-				  01000000 0 00000000 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Walnut has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1d 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1e 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 1f 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index b04a52e22bf5..340018cf16b7 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "pika,warp";
 	compatible = "pika,warp";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -42,14 +44,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -59,22 +61,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -86,86 +88,79 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
 		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				fpga@2,0 {
 					compatible = "pika,fpga";
-			   		reg = <2 0 2200>;
-					interrupts = <18 8>;
+			   		reg = <0x00000002 0x00000000 0x00001000>;
+					interrupts = <0x18 0x8>;
 					interrupt-parent = <&UIC0>;
 				};
 
+				fpga@2,4000 {
+					compatible = "pika,fpga-sd";
+					reg = <0x00000002 0x00004000 0x00000A00>;
+				};
+
 				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
+					compatible = "amd,s29gl032a", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 0 4000000>;
+					reg = <0x00000000 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0 180000>;
-					};
-					partition@180000 {
-						label = "root";
-						reg = <180000 3480000>;
-					};
-					partition@3600000 {
-						label = "user";
-						reg = <3600000 900000>;
-					};
-					partition@3f00000 {
+					partition@300000 {
 						label = "fpga";
-						reg = <3f00000 40000>;
+						reg = <0x0030000 0x00040000>;
 					};
-					partition@3f40000 {
+					partition@340000 {
 						label = "env";
-						reg = <3f40000 40000>;
+						reg = <0x0340000 0x00040000>;
 					};
-					partition@3f80000 {
+					partition@380000 {
 						label = "u-boot";
-						reg = <3f80000 80000>;
+						reg = <0x0380000 0x00080000>;
 					};
 				};
 			};
@@ -173,60 +168,80 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
+				index = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ad7414@4a {
+					compatible = "adi,ad7414";
+					reg = <0x4a>;
+					interrupts = <0x19 0x8>;
+					interrupt-parent = <&UIC0>;
+				};
 			};
 
 			GPIO0: gpio@ef600b00 {
 				compatible = "ibm,gpio-440ep";
-				reg = <ef600b00 48>;
+				reg = <0xef600b00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
 			};
 
 			GPIO1: gpio@ef600c00 {
 				compatible = "ibm,gpio-440ep";
-				reg = <ef600c00 48>;
+				reg = <0xef600c00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				led@31 {
+					compatible = "linux,gpio-led";
+					linux,name = ":green:";
+					gpios = <&GPIO1 0x30 0>;
+				};
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 1 9 1>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index 0d6d332814e0..e39422aa0d85 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,yosemite";
 	compatible = "amcc,yosemite","amcc,bamboo";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -46,14 +48,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -63,22 +65,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -90,29 +92,29 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
@@ -122,110 +124,110 @@
 			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
 			 * bits.
 			 */
-			ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+			ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
+			interrupts = <0x7 0x4>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <1c200>;
+				current-speed = <115200>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 				status = "disabled";
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <4 4>;
+				interrupts = <0x4 0x4>;
 				status = "disabled";
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			spi@ef600900 {
 				compatible = "amcc,spi-440ep";
-				reg = <ef600900 6>;
-				interrupts = <8 4>;
+				reg = <0xef600900 0x00000006>;
+				interrupts = <0x8 0x4>;
 				interrupt-parent = <&UIC0>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -234,26 +236,26 @@
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <ef600f00 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 4 9 4>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x4 0x9 0x4>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
@@ -265,35 +267,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
 			primary;
-			reg = <0 eec00000 8	/* Config space access */
-			       0 eed00000 4	/* IACK */
-			       0 eed00000 4	/* Special cycle */
-			       0 ef400000 40>;	/* Internal registers */
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
-				  01000000 0 00000000 0 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Bamboo has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1b 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1a 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 19 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/oflib.c b/arch/powerpc/boot/oflib.c
index 95b8fd69a403..b0ec9cf3eaaf 100644
--- a/arch/powerpc/boot/oflib.c
+++ b/arch/powerpc/boot/oflib.c
@@ -168,8 +168,19 @@ void *of_claim(unsigned long virt, unsigned long size, unsigned long align)
 
 void *of_vmlinux_alloc(unsigned long size)
 {
-	void *p = malloc(size);
-
+	unsigned long start = (unsigned long)_start, end = (unsigned long)_end;
+	void *addr;
+	void *p;
+
+	/* With some older POWER4 firmware we need to claim the area the kernel
+	 * will reside in.  Newer firmwares don't need this so we just ignore
+	 * the return value.
+	 */
+	addr = of_claim(start, end - start, 0);
+	printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %p\r\n",
+	       start, end, end - start, addr);
+
+	p = malloc(size);
 	if (!p)
 		fatal("Can't allocate memory for kernel image!\n\r");
 
diff --git a/arch/powerpc/boot/redboot-83xx.c b/arch/powerpc/boot/redboot-83xx.c
new file mode 100644
index 000000000000..79aa9e151fa7
--- /dev/null
+++ b/arch/powerpc/boot/redboot-83xx.c
@@ -0,0 +1,60 @@
+/*
+ * RedBoot firmware support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Codehermit
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "redboot.h"
+#include "fsl-soc.h"
+#include "io.h"
+
+static bd_t bd;
+BSS_STACK(4096);
+
+#define MHZ(x)	((x + 500000) / 1000000)
+
+static void platform_fixups(void)
+{
+	void *node;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	dt_fixup_mac_addresses(bd.bi_enetaddr);
+	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq);
+
+	node = finddevice("/soc/cpm/brg");
+	if (node) {
+		printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n",
+		       bd.bi_busfreq, MHZ(bd.bi_busfreq));
+		setprop(node, "clock-frequency",  &bd.bi_busfreq, 4);
+	}
+
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	memcpy(&bd, (char *)r3, sizeof(bd));
+
+	if (bd.bi_tag != 0x42444944)
+		return;
+
+	simple_alloc_init(_end,
+			  bd.bi_memstart + bd.bi_memsize - (unsigned long)_end,
+			  32, 64);
+
+	fdt_init(_dtb_start);
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+
+	loader_info.cmdline = (char *)bd.bi_cmdline;
+	loader_info.cmdline_len = strlen((char *)bd.bi_cmdline);
+}
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
index 86cd285bccc6..c58a0dada992 100644
--- a/arch/powerpc/boot/simpleboot.c
+++ b/arch/powerpc/boot/simpleboot.c
@@ -23,6 +23,8 @@
 
 BSS_STACK(4*1024);
 
+extern int platform_specific_init(void) __attribute__((weak));
+
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		   unsigned long r6, unsigned long r7)
 {
@@ -80,5 +82,9 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	/* prepare the device tree and find the console */
 	fdt_init(_dtb_start);
+
+	if (platform_specific_init)
+		platform_specific_init();
+
 	serial_console_init();
 }
diff --git a/arch/powerpc/boot/virtex.c b/arch/powerpc/boot/virtex.c
new file mode 100644
index 000000000000..f622805f8000
--- /dev/null
+++ b/arch/powerpc/boot/virtex.c
@@ -0,0 +1,100 @@
+/*
+ * The platform specific code for virtex devices since a boot loader is not
+ * always used.
+ *
+ * (C) Copyright 2008 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "stdio.h"
+
+#define UART_DLL		0	/* Out: Divisor Latch Low */
+#define UART_DLM		1	/* Out: Divisor Latch High */
+#define UART_FCR		2	/* Out: FIFO Control Register */
+#define UART_FCR_CLEAR_RCVR 	0x02 	/* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 	/* Clear the XMIT FIFO */
+#define UART_LCR		3	/* Out: Line Control Register */
+#define UART_MCR		4	/* Out: Modem Control Register */
+#define UART_MCR_RTS		0x02 	/* RTS complement */
+#define UART_MCR_DTR		0x01 	/* DTR complement */
+#define UART_LCR_DLAB		0x80 	/* Divisor latch access bit */
+#define UART_LCR_WLEN8		0x03 	/* Wordlength: 8 bits */
+
+static int virtex_ns16550_console_init(void *devp)
+{
+	unsigned char *reg_base;
+	u32 reg_shift, reg_offset, clk, spd;
+	u16 divisor;
+	int n;
+
+	if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
+		return -1;
+
+	n = getprop(devp, "reg-offset", &reg_offset, sizeof(reg_offset));
+	if (n == sizeof(reg_offset))
+		reg_base += reg_offset;
+
+	n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
+	if (n != sizeof(reg_shift))
+		reg_shift = 0;
+
+	n = getprop(devp, "current-speed", (void *)&spd, sizeof(spd));
+	if (n != sizeof(spd))
+		spd = 9600;
+
+	/* should there be a default clock rate?*/
+	n = getprop(devp, "clock-frequency", (void *)&clk, sizeof(clk));
+	if (n != sizeof(clk))
+		return -1;
+
+	divisor = clk / (16 * spd);
+
+	/* Access baud rate */
+	out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_DLAB);
+
+	/* Baud rate based on input clock */
+	out_8(reg_base + (UART_DLL << reg_shift), divisor & 0xFF);
+	out_8(reg_base + (UART_DLM << reg_shift), divisor >> 8);
+
+	/* 8 data, 1 stop, no parity */
+	out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_WLEN8);
+
+	/* RTS/DTR */
+	out_8(reg_base + (UART_MCR << reg_shift), UART_MCR_RTS | UART_MCR_DTR);
+
+	/* Clear transmitter and receiver */
+	out_8(reg_base + (UART_FCR << reg_shift),
+				UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR);
+	return 0;
+}
+
+/* For virtex, the kernel may be loaded without using a bootloader and if so
+   some UARTs need more setup than is provided in the normal console init
+*/
+int platform_specific_init(void)
+{
+	void *devp;
+	char devtype[MAX_PROP_LEN];
+	char path[MAX_PATH_LEN];
+
+	devp = finddevice("/chosen");
+	if (devp == NULL)
+		return -1;
+
+	if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0) {
+		devp = finddevice(path);
+		if (devp == NULL)
+			return -1;
+
+		if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0)
+				&& !strcmp(devtype, "serial")
+				&& (dt_is_compatible(devp, "ns16550")))
+				virtex_ns16550_console_init(devp);
+	}
+	return 0;
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index d6c96d9ab291..644bf9d4ea00 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -138,14 +138,20 @@ objflags=-S
 tmp=$tmpdir/zImage.$$.o
 ksection=.kernel:vmlinux.strip
 isection=.kernel:initrd
+link_address='0x400000'
 
 case "$platform" in
-pmac|pseries|chrp)
+pseries)
+    platformo=$object/of.o
+    link_address='0x4000000'
+    ;;
+pmac|chrp)
     platformo=$object/of.o
     ;;
 coff)
     platformo=$object/of.o
     lds=$object/zImage.coff.lds
+    link_address='0x500000'
     ;;
 miboot|uboot)
     # miboot and U-boot want just the bare bits, not an ELF binary
@@ -171,13 +177,13 @@ cuboot*)
     *-mpc824*)
         platformo=$object/cuboot-824x.o
         ;;
-    *-mpc83*)
+    *-mpc83*|*-asp834x*)
         platformo=$object/cuboot-83xx.o
         ;;
     *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
         platformo=$object/cuboot-85xx-cpm2.o
         ;;
-    *-mpc85*|*-tqm8540|*-sbc85*)
+    *-mpc85*|*-tqm85*|*-sbc85*)
         platformo=$object/cuboot-85xx.o
         ;;
     esac
@@ -190,6 +196,7 @@ ps3)
     objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
+    link_address=''
     ;;
 ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
@@ -200,7 +207,19 @@ adder875-redboot)
     binary=y
     ;;
 simpleboot-virtex405-*)
-    platformo="$object/virtex405-head.o $object/simpleboot.o"
+    platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
+    binary=y
+    ;;
+simpleboot-virtex440-*)
+    platformo="$object/simpleboot.o $object/virtex.o"
+    binary=y
+    ;;
+simpleboot-*)
+    platformo="$object/simpleboot.o"
+    binary=y
+    ;;
+asp834x-redboot)
+    platformo="$object/fixed-head.o $object/redboot-83xx.o"
     binary=y
     ;;
 esac
@@ -268,7 +287,10 @@ if [ -n "$dtb" ]; then
 fi
 
 if [ "$platform" != "miboot" ]; then
-    ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \
+    if [ -n "$link_address" ] ; then
+        text_start="-Ttext $link_address --defsym _start=$link_address"
+    fi
+    ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi
diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S
index fe87a90ce7f1..856dc78b14ef 100644
--- a/arch/powerpc/boot/zImage.coff.lds.S
+++ b/arch/powerpc/boot/zImage.coff.lds.S
@@ -3,7 +3,6 @@ ENTRY(_zimage_start_opd)
 EXTERN(_zimage_start_opd)
 SECTIONS
 {
-  . = (5*1024*1024);
   _start = .;
   .text      :
   {
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index f6e380fdb388..0962d62bdb50 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -3,7 +3,6 @@ ENTRY(_zimage_start)
 EXTERN(_zimage_start)
 SECTIONS
 {
-  . = (4*1024*1024);
   _start = .;
   .text      :
   {
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
new file mode 100644
index 000000000000..9ce5cbc2a4e7
--- /dev/null
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -0,0 +1,1192 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25
+# Mon May  5 13:43:02 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+CONFIG_SAM440EP=y
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_440EP=y
+CONFIG_IBM440EP_ERR42=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 087aedce1338..e53c92655bd6 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -348,7 +348,83 @@ CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -660,6 +736,7 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
new file mode 100644
index 000000000000..9c41f66b5a7d
--- /dev/null
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -0,0 +1,1107 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  2 15:36:41 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_5_FXT=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
new file mode 100644
index 000000000000..d2c435f0da42
--- /dev/null
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -0,0 +1,1128 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Mon May 19 21:12:32 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+CONFIG_MPC836x_RDK=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_QUICC_ENGINE=y
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
+CONFIG_UCC_GETH=y
+CONFIG_UGETH_NAPI=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_QE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+CONFIG_QE_GPIO=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index 042a85ea7b72..a0583e5119f5 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -997,10 +997,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 03627cfebcb4..164fd9606ee6 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -997,10 +997,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
new file mode 100644
index 000000000000..b3b770be3cc9
--- /dev/null
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -0,0 +1,1225 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Thu Jun 26 14:40:02 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+CONFIG_TQM8548=y
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+CONFIG_TQM85xx=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_FSL_UPM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/asp8347_defconfig b/arch/powerpc/configs/asp8347_defconfig
new file mode 100644
index 000000000000..60bb4d106c87
--- /dev/null
+++ b/arch/powerpc/configs/asp8347_defconfig
@@ -0,0 +1,1214 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc6
+# Tue May  6 02:21:00 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_REDBOOT=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
new file mode 100644
index 000000000000..dc599c7e97d5
--- /dev/null
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -0,0 +1,1872 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Thu May 15 11:00:14 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_CHECK_CACHE_COHERENCY=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
+# CONFIG_MPC7448HPC2 is not set
+# CONFIG_PPC_HOLLY is not set
+# CONFIG_PPC_PRPMC2800 is not set
+CONFIG_PPC_C2K=y
+CONFIG_MV64X60=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPU Frequency drivers
+#
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RR is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_MEGARAID_SAS=m
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_QLOGIC_1280=m
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_ISDN=m
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+# CONFIG_ISDN_PPP_BSDCOMP is not set
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DRV_LOOP=m
+# CONFIG_ISDN_DIVERSION is not set
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFC4S8S is not set
+CONFIG_HISAX_FRITZ_PCIPNP=m
+CONFIG_HISAX_HDLC=y
+
+#
+# Active cards
+#
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+# CONFIG_ISDN_DRV_GIGASET is not set
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
+CONFIG_ISDN_CAPI_CAPIFS=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MPSC=y
+CONFIG_SERIAL_MPSC_CONSOLE=y
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+CONFIG_NVRAM=m
+CONFIG_GEN_RTC=m
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+# CONFIG_SENSORS_ADM1029 is not set
+CONFIG_SENSORS_ADM1031=m
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+CONFIG_SENSORS_GL518SM=m
+# CONFIG_SENSORS_GL520SM is not set
+CONFIG_SENSORS_IT87=m
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+CONFIG_SENSORS_MAX1619=m
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+CONFIG_SENSORS_SMSC47M1=m
+# CONFIG_SENSORS_SMSC47M192 is not set
+CONFIG_SENSORS_SMSC47B397=m
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+CONFIG_SENSORS_VIA686A=m
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+CONFIG_SENSORS_W83781D=m
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+CONFIG_SENSORS_W83L785TS=m
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SENSORS_W83627HF=m
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_MV64X60_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+CONFIG_WDT_501_PCI=y
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_CM=y
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+# CONFIG_INFINIBAND_ISER is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_HIGHMEM=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8536_ds_defconfig b/arch/powerpc/configs/mpc8536_ds_defconfig
new file mode 100644
index 000000000000..f1e2931de5da
--- /dev/null
+++ b/arch/powerpc/configs/mpc8536_ds_defconfig
@@ -0,0 +1,1637 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  2 01:34:26 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+CONFIG_MPC8536_DS=y
+# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=524288
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+CONFIG_SKGE=y
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_CINERGYT2 is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_MT312 is not set
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_L64781 is not set
+# CONFIG_DVB_TDA1004X is not set
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+
+#
+# SEC control devices for DVB-S
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
+# CONFIG_DVB_ISL6421 is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# ALSA PowerMac devices
+#
+
+#
+# ALSA PowerPC devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 3efab71a603b..fa0170504b88 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1005,10 +1005,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 5612d40d0463..cdf98ae3682b 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:50:24 2008
+# Linux kernel version: 2.6.26
+# Tue Jul 15 08:31:01 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,8 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -97,6 +99,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -117,7 +120,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -153,31 +156,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
 # CONFIG_PPC_MPC512x is not set
 # CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
 CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
+CONFIG_FSL_ULI1575=y
 
 #
 # Kernel options
@@ -202,6 +217,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -228,11 +244,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -469,6 +487,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -571,6 +590,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
@@ -639,6 +660,10 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -655,6 +680,8 @@ CONFIG_DUMMY=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -762,14 +789,16 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -787,9 +816,11 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_POWERMAC=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
@@ -826,6 +857,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -888,6 +920,9 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_OF is not set
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
 # CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
@@ -1027,12 +1062,19 @@ CONFIG_SND_VERBOSE_PROCFS=y
 #
 # ALSA PowerMac devices
 #
+# CONFIG_SND_POWERMAC is not set
 
 #
 # ALSA PowerPC devices
 #
 
 #
+# Apple Onboard Audio driver
+#
+# CONFIG_SND_AOA is not set
+# CONFIG_SND_AOA_SOUNDBUS is not set
+
+#
 # System on Chip audio support
 #
 CONFIG_SND_SOC=y
@@ -1075,7 +1117,57 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -1295,8 +1387,11 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 4a8171507391..867b8c0215f3 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -991,10 +991,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 12f9b5a80220..f9d279bb700b 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Sat Apr  5 09:35:48 2008
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  9 13:50:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -88,6 +90,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -115,12 +118,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -157,6 +162,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 # CONFIG_PQ2ADS is not set
 CONFIG_BAMBOO=y
 CONFIG_EBONY=y
+CONFIG_SAM440EP=y
 CONFIG_SEQUOIA=y
 CONFIG_TAISHAN=y
 CONFIG_KATMAI=y
@@ -164,6 +170,7 @@ CONFIG_RAINIER=y
 CONFIG_WARP=y
 CONFIG_CANYONLANDS=y
 CONFIG_YOSEMITE=y
+CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
 CONFIG_440EP=y
 CONFIG_440EPX=y
 CONFIG_440GRX=y
@@ -172,6 +179,8 @@ CONFIG_440GX=y
 CONFIG_440SPe=y
 CONFIG_460EX=y
 CONFIG_IBM440EP_ERR42=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_5_FXT=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -220,13 +229,16 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -246,6 +258,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -255,13 +268,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
 
 #
 # Networking
@@ -303,8 +316,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -366,6 +377,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -478,6 +490,10 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -528,7 +544,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -546,6 +561,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -553,6 +569,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -579,6 +596,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -611,22 +629,19 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -639,12 +654,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -671,6 +696,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -679,14 +706,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -701,7 +725,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -770,7 +793,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -798,6 +820,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -818,6 +841,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -828,6 +852,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -840,6 +865,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -851,6 +877,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -861,50 +890,80 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
new file mode 100644
index 000000000000..e6e91c85da31
--- /dev/null
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -0,0 +1,3304 @@
+# powerpc
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-git2
+# Tue Jul 15 23:54:18 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_LSF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+# CONFIG_PPC_MPC5200_SIMPLE is not set
+CONFIG_PPC_EFIKA=y
+# CONFIG_PPC_LITE5200 is not set
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_PMAC=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
+CONFIG_MPC8272_ADS=y
+CONFIG_PQ2FADS=y
+CONFIG_EP8248E=y
+CONFIG_PQ2ADS=y
+CONFIG_8260=y
+CONFIG_8272=y
+CONFIG_PQ2_ADS_PCI_PIC=y
+CONFIG_PPC_83xx=y
+CONFIG_MPC831x_RDB=y
+CONFIG_MPC832x_MDS=y
+CONFIG_MPC832x_RDB=y
+CONFIG_MPC834x_MDS=y
+CONFIG_MPC834x_ITX=y
+CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
+CONFIG_MPC837x_MDS=y
+CONFIG_MPC837x_RDB=y
+CONFIG_SBC834x=y
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC831x=y
+CONFIG_PPC_MPC832x=y
+CONFIG_PPC_MPC834x=y
+CONFIG_PPC_MPC837x=y
+CONFIG_PPC_86xx=y
+CONFIG_MPC8641_HPCN=y
+CONFIG_SBC8641D=y
+CONFIG_MPC8610_HPCD=y
+CONFIG_MPC8641=y
+CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_IPIC=y
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# CPU Frequency drivers
+#
+CONFIG_CPU_FREQ_PMAC=y
+# CONFIG_PPC601_SYNC_FIX is not set
+CONFIG_TAU=y
+# CONFIG_TAU_INT is not set
+CONFIG_TAU_AVERAGE=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=m
+CONFIG_PPC_BESTCOMM_FEC=m
+CONFIG_PPC_BESTCOMM_GEN_BD=m
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_APM_EMULATION=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_PAGE_OFFSET_BOOL is not set
+CONFIG_PAGE_OFFSET=0xc0000000
+# CONFIG_KERNEL_START_BOOL is not set
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_NET_DCCPPROBE=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_DECNET=m
+CONFIG_DECNET_ROUTER=y
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_QOS=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_IEEE80211=m
+CONFIG_IEEE80211_DEBUG=y
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_PC_PCMCIA is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPACPI is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+CONFIG_MAC_FLOPPY=m
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_VIRTIO_BLK=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
+CONFIG_BLK_DEV_IDEDMA_PMAC=y
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_BLK_DEV_HD_ONLY=y
+CONFIG_BLK_DEV_HD=y
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_MESH=m
+CONFIG_SCSI_MESH_SYNC_RATE=5
+CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
+CONFIG_SCSI_MAC53C94=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=m
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+CONFIG_ATA_PIIX=m
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+CONFIG_PDC_ADMA=m
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+CONFIG_ATA_GENERIC=m
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=m
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_OPTIDMA=m
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+CONFIG_PATA_VIA=m
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+CONFIG_PATA_SCH=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_DEBUG=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_PMAC_APM_EMU=y
+CONFIG_PMAC_MEDIABAY=y
+CONFIG_PMAC_BACKLIGHT=y
+# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
+CONFIG_ADB_MACIO=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_WINDTUNNEL=m
+CONFIG_THERM_ADT746X=m
+CONFIG_WINDFARM=y
+# CONFIG_ANSLCD is not set
+CONFIG_PMAC_RACKMETER=m
+CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NET_SB1000=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MACE=m
+# CONFIG_MACE_AAUI_PORT is not set
+CONFIG_BMAC=m
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+# CONFIG_WD80x3 is not set
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+CONFIG_AMD8111_ETH=m
+CONFIG_AMD8111E_NAPI=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_ADAPTEC_STARFIRE_NAPI=y
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_FORCEDETH=m
+CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=m
+CONFIG_FEALNX=m
+CONFIG_NATSEMI=m
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R6040=m
+CONFIG_SIS900=m
+CONFIG_EPIC100=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_TLAN=m
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_RHINE_NAPI=y
+CONFIG_SC92031=m
+CONFIG_NET_POCKET=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_FEC_MPC52xx=m
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_FS_ENET is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_DL2K=m
+CONFIG_E1000=m
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+CONFIG_E1000E=m
+CONFIG_E1000E_ENABLED=y
+CONFIG_IP1000=m
+CONFIG_IGB=m
+CONFIG_NS83820=m
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_R8169=m
+CONFIG_R8169_NAPI=y
+CONFIG_R8169_VLAN=y
+CONFIG_SIS190=m
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_VIA_VELOCITY=m
+CONFIG_TIGON3=m
+CONFIG_BNX2=m
+CONFIG_GIANFAR=m
+CONFIG_GFAR_NAPI=y
+# CONFIG_UCC_GETH is not set
+CONFIG_MV643XX_ETH=m
+CONFIG_QLA3XXX=m
+CONFIG_ATL1=m
+CONFIG_NETDEV_10000=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T1_NAPI=y
+CONFIG_CHELSIO_T3=m
+CONFIG_IXGBE=m
+CONFIG_IXGB=m
+CONFIG_IXGB_NAPI=y
+CONFIG_S2IO=m
+CONFIG_S2IO_NAPI=y
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NIU=m
+# CONFIG_MLX4_CORE is not set
+CONFIG_TEHUTI=m
+CONFIG_BNX2X=m
+CONFIG_SFC=m
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+CONFIG_ATM_FORE200E_MAYBE=m
+# CONFIG_ATM_FORE200E_PCA is not set
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_FDDI=y
+# CONFIG_DEFXX is not set
+CONFIG_SKFP=m
+# CONFIG_HIPPI is not set
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_NET_FC=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+CONFIG_INPUT_LIRC=y
+CONFIG_LIRC_DEV=m
+CONFIG_LIRC_ATIUSB=m
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_CMDIR=m
+CONFIG_LIRC_I2C=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_IT87=m
+CONFIG_LIRC_MCEUSB=m
+CONFIG_LIRC_MCEUSB2=m
+CONFIG_LIRC_PVR150=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_STREAMZAP=m
+CONFIG_LIRC_TTUSBIR=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+CONFIG_NOZOMI=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_PMACZILOG_TTYS is not set
+# CONFIG_SERIAL_CPM is not set
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_QE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_CRASH is not set
+CONFIG_BRIQ_PANEL=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+# CONFIG_HVC_RTAS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
+CONFIG_R3964=m
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_HYDRA=m
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=m
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+CONFIG_I2C_VOODOO3=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_PCF8575=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_MATROX is not set
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_APM_POWER=m
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_PMU=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7473=m
+CONFIG_SENSORS_AMS=m
+CONFIG_SENSORS_AMS_PMU=y
+CONFIG_SENSORS_AMS_I2C=y
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_MPC5200_WDT is not set
+CONFIG_83xx_WDT=m
+CONFIG_WATCHDOG_RTAS=m
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=m
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR_I2C=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_SAA6588=m
+# CONFIG_VIDEO_PMS is not set
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+# CONFIG_MT9M001_PCA9536_SWITCH is not set
+CONFIG_SOC_CAMERA_MT9V022=m
+# CONFIG_MT9V022_PCA9536_SWITCH is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+CONFIG_DVB_CINERGYT2_TUNING=y
+CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
+CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
+CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
+CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
+CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=y
+CONFIG_AGP_UNINORTH=y
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_VGASTATE=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SVGALIB=m
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+CONFIG_FB_PLATINUM=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_CT65550=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_MATROX_MULTIHEAD=y
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=y
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+# CONFIG_FB_SIS is not set
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+CONFIG_FB_3DFX_ACCEL=y
+CONFIG_FB_VOODOO1=m
+# CONFIG_FB_VT8623 is not set
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_TRIDENT_ACCEL=y
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+CONFIG_FB_SM501=m
+CONFIG_FB_IBM_GXT4500=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+CONFIG_SND_VMASTER=y
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_SC6000 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_FM801_TEA575X=m
+# CONFIG_SND_HDA_INTEL is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_HIFIER=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+CONFIG_SND_KORG1212=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+# CONFIG_USB_TEST is not set
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+CONFIG_AUXDISPLAY=y
+CONFIG_KS0108=m
+CONFIG_KS0108_PORT=0x378
+CONFIG_KS0108_DELAY=2
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_SMX=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4DEV_FS=m
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_JBD2_DEBUG=y
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_HPFS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_DLM_DEBUG=y
+CONFIG_QE_GPIO=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_HIGHMEM=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_FRAME_POINTER=y
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_LATENCYTOP=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+CONFIG_FTRACE=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_KGDB_CONSOLE is not set
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_CRYPTO_DEV_TALITOS=m
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 71d79e428d20..f9a3d3b394cf 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon Apr 28 12:39:10 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 16 13:59:24 2008
 #
 CONFIG_PPC64=y
 
@@ -14,8 +14,9 @@ CONFIG_POWER4=y
 CONFIG_TUNE_CELL=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -90,6 +92,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,15 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -132,6 +138,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -152,13 +159,8 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -187,6 +189,7 @@ CONFIG_PPC_CELL=y
 # Cell Broadband Engine options
 #
 CONFIG_SPU_FS=y
+CONFIG_SPU_FS_64K_LS=y
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
 # CONFIG_IPIC is not set
@@ -222,6 +225,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -248,18 +252,22 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_ARCH_MEMORY_PROBE=y
-# CONFIG_PPC_HAS_HASH_64K is not set
+CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
@@ -273,6 +281,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
@@ -412,6 +421,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -478,6 +489,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
@@ -533,8 +545,18 @@ CONFIG_USB_NET_MCS7830=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_WAN is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -603,6 +625,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -618,23 +641,17 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -652,8 +669,17 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -671,8 +697,8 @@ CONFIG_FB=y
 CONFIG_FB_SYS_FILLRECT=y
 CONFIG_FB_SYS_COPYAREA=y
 CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -712,18 +738,12 @@ CONFIG_FB_LOGO_EXTRA=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -732,53 +752,20 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerMac requires I2C
-#
-
-#
-# ALSA PowerPC devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PPC=y
 CONFIG_SND_PS3=m
 CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
+CONFIG_HIDRAW=y
 
 #
 # USB Input Devices
@@ -807,17 +794,20 @@ CONFIG_USB=m
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -831,6 +821,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -890,12 +881,45 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -911,6 +935,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -959,8 +984,8 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1059,12 +1084,15 @@ CONFIG_NLS_ISO8859_1=y
 #
 CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
@@ -1082,7 +1110,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1090,33 +1118,49 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
 # CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_LOCKDEP=y
+CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1172,6 +1216,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index adaa05fb0478..fe6ffa683d78 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -946,6 +946,7 @@ CONFIG_HVC_DRIVER=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
+CONFIG_IBM_BSR=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 2346d271fbfd..1a4094704b1f 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -12,6 +12,18 @@ CFLAGS_prom_init.o      += -fPIC
 CFLAGS_btext.o		+= -fPIC
 endif
 
+ifdef CONFIG_FTRACE
+# Do not trace early boot code
+CFLAGS_REMOVE_cputable.o = -pg
+CFLAGS_REMOVE_prom_init.o = -pg
+
+ifdef CONFIG_DYNAMIC_FTRACE
+# dynamic ftrace setup.
+CFLAGS_REMOVE_ftrace.o = -pg
+endif
+
+endif
+
 obj-y				:= cputable.o ptrace.o syscalls.o \
 				   irq.o align.o signal_32.o pmc.o vdso.o \
 				   init_task.o process.o systbl.o idle.o \
@@ -38,12 +50,13 @@ obj-$(CONFIG_IBMVIO)		+= vio.o
 obj-$(CONFIG_IBMEBUS)           += ibmebus.o
 obj-$(CONFIG_GENERIC_TBSYNC)	+= smp-tbsync.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_E500)		+= idle_e500.o
 obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
 obj-$(CONFIG_TAU)		+= tau_6xx.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o \
 				   swsusp_$(CONFIG_WORD_SIZE).o
 obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
-obj-$(CONFIG_MODULES)		+= module_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 
 ifeq ($(CONFIG_PPC_MERGE),y)
@@ -61,6 +74,7 @@ obj-y				+= time.o prom.o traps.o setup-common.o \
 				   misc_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o
 obj-$(CONFIG_PPC64)		+= dma_64.o iommu.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
@@ -78,6 +92,8 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o \
 obj-$(CONFIG_AUDIT)		+= audit.o
 obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+
 obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
 
 ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index e06f75daeba3..367129789cc0 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -48,6 +48,7 @@ struct aligninfo {
 #define HARD	0x80	/* string, stwcx. */
 #define E4	0x40	/* SPE endianness is word */
 #define E8	0x80	/* SPE endianness is double word */
+#define SPLT	0x80	/* VSX SPLAT load */
 
 /* DSISR bits reported for a DCBZ instruction: */
 #define DCBZ	0x5f	/* 8xx/82xx dcbz faults when cache not enabled */
@@ -363,10 +364,10 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
  * Only POWER6 has these instructions, and it does true little-endian,
  * so we don't need the address swizzling.
  */
-static int emulate_fp_pair(struct pt_regs *regs, unsigned char __user *addr,
-			   unsigned int reg, unsigned int flags)
+static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
+			   unsigned int flags)
 {
-	char *ptr = (char *) &current->thread.fpr[reg];
+	char *ptr = (char *) &current->thread.TS_FPR(reg);
 	int i, ret;
 
 	if (!(flags & F))
@@ -637,6 +638,36 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 }
 #endif /* CONFIG_SPE */
 
+#ifdef CONFIG_VSX
+/*
+ * Emulate VSX instructions...
+ */
+static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
+		       unsigned int areg, struct pt_regs *regs,
+		       unsigned int flags, unsigned int length)
+{
+	char *ptr = (char *) &current->thread.TS_FPR(reg);
+	int ret;
+
+	flush_vsx_to_thread(current);
+
+	if (flags & ST)
+		ret = __copy_to_user(addr, ptr, length);
+        else {
+		if (flags & SPLT){
+			ret = __copy_from_user(ptr, addr, length);
+			ptr += length;
+		}
+		ret |= __copy_from_user(ptr, addr, length);
+	}
+	if (flags & U)
+		regs->gpr[areg] = regs->dar;
+	if (ret)
+		return -EFAULT;
+	return 1;
+}
+#endif
+
 /*
  * Called on alignment exception. Attempts to fixup
  *
@@ -647,7 +678,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 
 int fix_alignment(struct pt_regs *regs)
 {
-	unsigned int instr, nb, flags;
+	unsigned int instr, nb, flags, instruction = 0;
 	unsigned int reg, areg;
 	unsigned int dsisr;
 	unsigned char __user *addr;
@@ -689,6 +720,7 @@ int fix_alignment(struct pt_regs *regs)
 		if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE))
 			instr = cpu_to_le32(instr);
 		dsisr = make_dsisr(instr);
+		instruction = instr;
 	}
 
 	/* extract the operation and registers from the dsisr */
@@ -728,6 +760,30 @@ int fix_alignment(struct pt_regs *regs)
 	/* DAR has the operand effective address */
 	addr = (unsigned char __user *)regs->dar;
 
+#ifdef CONFIG_VSX
+	if ((instruction & 0xfc00003e) == 0x7c000018) {
+		/* Additional register addressing bit (64 VSX vs 32 FPR/GPR */
+		reg |= (instruction & 0x1) << 5;
+		/* Simple inline decoder instead of a table */
+		if (instruction & 0x200)
+			nb = 16;
+		else if (instruction & 0x080)
+			nb = 8;
+		else
+			nb = 4;
+		flags = 0;
+		if (instruction & 0x100)
+			flags |= ST;
+		if (instruction & 0x040)
+			flags |= U;
+		/* splat load needs a special decoder */
+		if ((instruction & 0x400) == 0){
+			flags |= SPLT;
+			nb = 8;
+		}
+		return emulate_vsx(addr, reg, areg, regs, flags, nb);
+	}
+#endif
 	/* A size of 0 indicates an instruction we don't support, with
 	 * the exception of DCBZ which is handled as a special case here
 	 */
@@ -759,7 +815,7 @@ int fix_alignment(struct pt_regs *regs)
 
 	/* Special case for 16-byte FP loads and stores */
 	if (nb == 16)
-		return emulate_fp_pair(regs, addr, reg, flags);
+		return emulate_fp_pair(addr, reg, flags);
 
 	/* If we are loading, get the data from user space, else
 	 * get it from register values
@@ -784,7 +840,7 @@ int fix_alignment(struct pt_regs *regs)
 				return -EFAULT;
 		}
 	} else if (flags & F) {
-		data.dd = current->thread.fpr[reg];
+		data.dd = current->thread.TS_FPR(reg);
 		if (flags & S) {
 			/* Single-precision FP store requires conversion... */
 #ifdef CONFIG_PPC_FPU
@@ -862,7 +918,7 @@ int fix_alignment(struct pt_regs *regs)
 		if (unlikely(ret))
 			return -EFAULT;
 	} else if (flags & F)
-		current->thread.fpr[reg] = data.dd;
+		current->thread.TS_FPR(reg) = data.dd;
 	else
 		regs->gpr[reg] = data.ll;
 
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index ec9228d687b0..92768d3006f7 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -52,6 +52,10 @@
 #include <asm/iseries/alpaca.h>
 #endif
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include "head_booke.h"
+#endif
+
 int main(void)
 {
 	DEFINE(THREAD, offsetof(struct task_struct, thread));
@@ -74,6 +78,10 @@ int main(void)
 	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
 	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	DEFINE(THREAD_VSR0, offsetof(struct thread_struct, fpr));
+	DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr));
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_PPC64
 	DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
 #else /* CONFIG_PPC64 */
@@ -242,6 +250,25 @@ int main(void)
 	DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
 #endif /* CONFIG_PPC64 */
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+	DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
+	DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
+	/* we overload MMUCR for 44x on MAS0 since they are mutually exclusive */
+	DEFINE(MMUCR, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
+	DEFINE(MAS1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas1));
+	DEFINE(MAS2, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas2));
+	DEFINE(MAS3, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas3));
+	DEFINE(MAS6, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas6));
+	DEFINE(MAS7, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas7));
+	DEFINE(_SRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr0));
+	DEFINE(_SRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr1));
+	DEFINE(_CSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr0));
+	DEFINE(_CSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr1));
+	DEFINE(_DSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr0));
+	DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
+	DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit));
+#endif
+
 	DEFINE(CLONE_VM, CLONE_VM);
 	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
 
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index e3623e3e3451..5465e8de0e61 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -33,6 +33,7 @@ _GLOBAL(__setup_cpu_440grx)
 	mtlr	r4
 	blr
 _GLOBAL(__setup_cpu_460ex)
+_GLOBAL(__setup_cpu_460gt)
 	b	__init_fpu_44x
 _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index e44d5530f0a6..25c273c761d1 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -23,6 +23,9 @@
 struct cpu_spec* cur_cpu_spec = NULL;
 EXPORT_SYMBOL(cur_cpu_spec);
 
+/* The platform string corresponding to the real PVR */
+const char *powerpc_base_platform;
+
 /* NOTE:
  * Unlike ppc32, ppc64 will only call this once for the boot CPU, it's
  * the responsibility of the appropriate CPU save/restore functions to
@@ -37,6 +40,7 @@ extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -52,6 +56,8 @@ extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_pa6t(void);
 extern void __restore_cpu_ppc970(void);
+extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_power7(void);
 #endif /* CONFIG_PPC64 */
 
 /* This table only contains "desktop" CPUs, it need to be filled with embedded
@@ -67,7 +73,12 @@ extern void __restore_cpu_ppc970(void);
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_POWER6	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
-				 PPC_FEATURE_TRUE_LE)
+				 PPC_FEATURE_TRUE_LE | \
+				 PPC_FEATURE_PSERIES_PERFMON_COMPAT)
+#define COMMON_USER_POWER7	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_06 |\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
+				 PPC_FEATURE_TRUE_LE | \
+				 PPC_FEATURE_PSERIES_PERFMON_COMPAT)
 #define COMMON_USER_PA6T	(COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
 				 PPC_FEATURE_TRUE_LE | \
 				 PPC_FEATURE_HAS_ALTIVEC_COMP)
@@ -347,6 +358,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power5+",
 		.platform		= "power5+",
 	},
 	{	/* Power6 */
@@ -378,8 +390,41 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power6",
 		.platform		= "power6",
 	},
+	{	/* 2.06-compliant processor, i.e. Power7 "architected" mode */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x0f000003,
+		.cpu_name		= "POWER7 (architected)",
+		.cpu_features		= CPU_FTRS_POWER7,
+		.cpu_user_features	= COMMON_USER_POWER7,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power7",
+		.platform		= "power7",
+	},
+	{	/* Power7 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x003f0000,
+		.cpu_name		= "POWER7 (raw)",
+		.cpu_features		= CPU_FTRS_POWER7,
+		.cpu_user_features	= COMMON_USER_POWER7,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
+		.cpu_setup		= __setup_cpu_power7,
+		.cpu_restore		= __restore_cpu_power7,
+		.oprofile_cpu_type	= "ppc64/power7",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.oprofile_mmcra_sihv	= POWER6_MMCRA_SIHV,
+		.oprofile_mmcra_sipr	= POWER6_MMCRA_SIPR,
+		.oprofile_mmcra_clear	= POWER6_MMCRA_THRM |
+			POWER6_MMCRA_OTHER,
+		.platform		= "power7",
+	},
 	{	/* Cell Broadband Engine */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00700000,
@@ -1410,6 +1455,16 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 440 in Xilinx Virtex-5 FXT */
+		.pvr_mask		= 0xfffffff0,
+		.pvr_value		= 0x7ff21910,
+		.cpu_name		= "440 in Virtex-5 FXT",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.platform		= "ppc440",
+	},
 	{ /* 460EX */
 		.pvr_mask		= 0xffff0002,
 		.pvr_value		= 0x13020002,
@@ -1427,9 +1482,10 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_value		= 0x13020000,
 		.cpu_name		= "460GT",
 		.cpu_features		= CPU_FTRS_44X,
-		.cpu_user_features	= COMMON_USER_BOOKE,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460gt,
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
@@ -1491,7 +1547,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80200000,
 		.cpu_name		= "e500",
-		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
 		.cpu_features		= CPU_FTRS_E500,
 		.cpu_user_features	= COMMON_USER_BOOKE |
 			PPC_FEATURE_HAS_SPE_COMP |
@@ -1508,7 +1563,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80210000,
 		.cpu_name		= "e500v2",
-		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
 		.cpu_features		= CPU_FTRS_E500_2,
 		.cpu_user_features	= COMMON_USER_BOOKE |
 			PPC_FEATURE_HAS_SPE_COMP |
@@ -1522,6 +1576,20 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8548",
 	},
+	{	/* e500mc */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x80230000,
+		.cpu_name		= "e500mc",
+		.cpu_features		= CPU_FTRS_E500MC,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 4,
+		.oprofile_cpu_type	= "ppc/e500", /* xxx - galak, e500mc? */
+		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
+		.machine_check		= machine_check_e500,
+		.platform		= "ppce500mc",
+	},
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
@@ -1567,9 +1635,34 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 				t->cpu_setup = s->cpu_setup;
 				t->cpu_restore = s->cpu_restore;
 				t->platform = s->platform;
+				/*
+				 * If we have passed through this logic once
+				 * before and have pulled the default case
+				 * because the real PVR was not found inside
+				 * cpu_specs[], then we are possibly running in
+				 * compatibility mode. In that case, let the
+				 * oprofiler know which set of compatibility
+				 * counters to pull from by making sure the
+				 * oprofile_cpu_type string is set to that of
+				 * compatibility mode. If the oprofile_cpu_type
+				 * already has a value, then we are possibly
+				 * overriding a real PVR with a logical one, and,
+				 * in that case, keep the current value for
+				 * oprofile_cpu_type.
+				 */
+				if (t->oprofile_cpu_type == NULL)
+					t->oprofile_cpu_type = s->oprofile_cpu_type;
 			} else
 				*t = *s;
 			*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
+
+			/*
+			 * Set the base platform string once; assumes
+			 * we're called with real pvr first.
+			 */
+			if (*PTRRELOC(&powerpc_base_platform) == NULL)
+				*PTRRELOC(&powerpc_base_platform) = t->platform;
+
 #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
 			/* ppc64 and booke expect identify_cpu to also call
 			 * setup_cpu for that processor. I will consolidate
@@ -1587,38 +1680,3 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 	BUG();
 	return NULL;
 }
-
-void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
-{
-	struct fixup_entry {
-		unsigned long	mask;
-		unsigned long	value;
-		long		start_off;
-		long		end_off;
-	} *fcur, *fend;
-
-	fcur = fixup_start;
-	fend = fixup_end;
-
-	for (; fcur < fend; fcur++) {
-		unsigned int *pstart, *pend, *p;
-
-		if ((value & fcur->mask) == fcur->value)
-			continue;
-
-		/* These PTRRELOCs will disappear once the new scheme for
-		 * modules and vdso is implemented
-		 */
-		pstart = ((unsigned int *)fcur) + (fcur->start_off / 4);
-		pend = ((unsigned int *)fcur) + (fcur->end_off / 4);
-
-		for (p = pstart; p < pend; p++) {
-			*p = 0x60000000u;
-			asm volatile ("dcbst 0, %0" : : "r" (p));
-		}
-		asm volatile ("sync" : : : "memory");
-		for (p = pstart; p < pend; p++)
-			asm volatile ("icbi 0,%0" : : "r" (p));
-		asm volatile ("sync; isync" : : : "memory");
-	}
-}
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index eae401de3f76..0a8439aafdd1 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -48,7 +48,7 @@ int crashing_cpu = -1;
 static cpumask_t cpus_in_crash = CPU_MASK_NONE;
 cpumask_t cpus_in_sr = CPU_MASK_NONE;
 
-#define CRASH_HANDLER_MAX 1
+#define CRASH_HANDLER_MAX 2
 /* NULL terminated list of shutdown handles */
 static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1];
 static DEFINE_SPINLOCK(crash_handlers_lock);
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 9ee3c5278db0..e0debcca0bfa 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -14,6 +14,7 @@
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
 #include <linux/lmb.h>
+#include <asm/code-patching.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
 #include <asm/firmware.h>
@@ -33,6 +34,8 @@ void __init reserve_kdump_trampoline(void)
 
 static void __init create_trampoline(unsigned long addr)
 {
+	unsigned int *p = (unsigned int *)addr;
+
 	/* The maximum range of a single instruction branch, is the current
 	 * instruction's address + (32 MB - 4) bytes. For the trampoline we
 	 * need to branch to current address + 32 MB. So we insert a nop at
@@ -41,8 +44,8 @@ static void __init create_trampoline(unsigned long addr)
 	 * branch to "addr" we jump to ("addr" + 32 MB). Although it requires
 	 * two instructions it doesn't require any registers.
 	 */
-	create_instruction(addr, 0x60000000); /* nop */
-	create_branch(addr + 4, addr + PHYSICAL_START, 0);
+	patch_instruction(p, PPC_NOP_INSTR);
+	patch_branch(++p, addr + PHYSICAL_START, 0);
 }
 
 void __init setup_kdump_trampoline(void)
diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c
index 3a317cb0636a..ae5708e3a312 100644
--- a/arch/powerpc/kernel/dma_64.c
+++ b/arch/powerpc/kernel/dma_64.c
@@ -15,15 +15,6 @@
  * Generic iommu implementation
  */
 
-static inline unsigned long device_to_mask(struct device *dev)
-{
-	if (dev->dma_mask && *dev->dma_mask)
-		return *dev->dma_mask;
-	/* Assume devices without mask can take 32 bit addresses */
-	return 0xfffffffful;
-}
-
-
 /* Allocates a contiguous real buffer and creates mappings over it.
  * Returns the virtual address of the buffer and sets dma_handle
  * to the dma address (mapping) of the first page.
@@ -50,32 +41,38 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size,
  */
 static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr,
 				       size_t size,
-				       enum dma_data_direction direction)
+				       enum dma_data_direction direction,
+				       struct dma_attrs *attrs)
 {
 	return iommu_map_single(dev, dev->archdata.dma_data, vaddr, size,
-			        device_to_mask(dev), direction);
+				device_to_mask(dev), direction, attrs);
 }
 
 
 static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle,
 				   size_t size,
-				   enum dma_data_direction direction)
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
 {
-	iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction);
+	iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction,
+			   attrs);
 }
 
 
 static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
-			    int nelems, enum dma_data_direction direction)
+			    int nelems, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
-	return iommu_map_sg(dev, sglist, nelems,
-			    device_to_mask(dev), direction);
+	return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+			    device_to_mask(dev), direction, attrs);
 }
 
 static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
-		int nelems, enum dma_data_direction direction)
+		int nelems, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
-	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction);
+	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+		       attrs);
 }
 
 /* We support DMA to/from any memory page via the iommu */
@@ -148,19 +145,22 @@ static void dma_direct_free_coherent(struct device *dev, size_t size,
 
 static dma_addr_t dma_direct_map_single(struct device *dev, void *ptr,
 					size_t size,
-					enum dma_data_direction direction)
+					enum dma_data_direction direction,
+					struct dma_attrs *attrs)
 {
 	return virt_to_abs(ptr) + get_dma_direct_offset(dev);
 }
 
 static void dma_direct_unmap_single(struct device *dev, dma_addr_t dma_addr,
 				    size_t size,
-				    enum dma_data_direction direction)
+				    enum dma_data_direction direction,
+				    struct dma_attrs *attrs)
 {
 }
 
 static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
-			     int nents, enum dma_data_direction direction)
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int i;
@@ -174,7 +174,8 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 }
 
 static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction)
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs)
 {
 }
 
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 0c8614d9875c..81c8324a4a3c 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -30,6 +30,7 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
+#include <asm/ftrace.h>
 
 #undef SHOW_SYSCALLS
 #undef SHOW_SYSCALLS_TASK
@@ -44,29 +45,54 @@
 #endif
 
 #ifdef CONFIG_BOOKE
-#include "head_booke.h"
-#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level)	\
-	mtspr	exc_level##_SPRG,r8;			\
-	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);		\
-	lwz	r0,GPR10-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR10(r11);				\
-	lwz	r0,GPR11-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR11(r11);				\
-	mfspr	r8,exc_level##_SPRG
-
 	.globl	mcheck_transfer_to_handler
 mcheck_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK)
-	b	transfer_to_handler_full
+	mfspr	r0,SPRN_DSRR0
+	stw	r0,_DSRR0(r11)
+	mfspr	r0,SPRN_DSRR1
+	stw	r0,_DSRR1(r11)
+	/* fall through */
 
 	.globl	debug_transfer_to_handler
 debug_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG)
-	b	transfer_to_handler_full
+	mfspr	r0,SPRN_CSRR0
+	stw	r0,_CSRR0(r11)
+	mfspr	r0,SPRN_CSRR1
+	stw	r0,_CSRR1(r11)
+	/* fall through */
 
 	.globl	crit_transfer_to_handler
 crit_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT)
+#ifdef CONFIG_FSL_BOOKE
+	mfspr	r0,SPRN_MAS0
+	stw	r0,MAS0(r11)
+	mfspr	r0,SPRN_MAS1
+	stw	r0,MAS1(r11)
+	mfspr	r0,SPRN_MAS2
+	stw	r0,MAS2(r11)
+	mfspr	r0,SPRN_MAS3
+	stw	r0,MAS3(r11)
+	mfspr	r0,SPRN_MAS6
+	stw	r0,MAS6(r11)
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r0,SPRN_MAS7
+	stw	r0,MAS7(r11)
+#endif /* CONFIG_PHYS_64BIT */
+#endif /* CONFIG_FSL_BOOKE */
+#ifdef CONFIG_44x
+	mfspr	r0,SPRN_MMUCR
+	stw	r0,MMUCR(r11)
+#endif
+	mfspr	r0,SPRN_SRR0
+	stw	r0,_SRR0(r11)
+	mfspr	r0,SPRN_SRR1
+	stw	r0,_SRR1(r11)
+
+	mfspr	r8,SPRN_SPRG3
+	lwz	r0,KSP_LIMIT(r8)
+	stw	r0,SAVED_KSP_LIMIT(r11)
+	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
+	stw	r0,KSP_LIMIT(r8)
 	/* fall through */
 #endif
 
@@ -77,6 +103,16 @@ crit_transfer_to_handler:
 	stw	r0,GPR10(r11)
 	lwz	r0,crit_r11@l(0)
 	stw	r0,GPR11(r11)
+	mfspr	r0,SPRN_SRR0
+	stw	r0,crit_srr0@l(0)
+	mfspr	r0,SPRN_SRR1
+	stw	r0,crit_srr1@l(0)
+
+	mfspr	r8,SPRN_SPRG3
+	lwz	r0,KSP_LIMIT(r8)
+	stw	r0,saved_ksp_limit@l(0)
+	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
+	stw	r0,KSP_LIMIT(r8)
 	/* fall through */
 #endif
 
@@ -112,7 +148,7 @@ transfer_to_handler:
 	/* Check to see if the dbcr0 register is set up to debug.  Use the
 	   internal debug mode bit to do this. */
 	lwz	r12,THREAD_DBCR0(r12)
-	andis.	r12,r12,DBCR0_IDM@h
+	andis.	r12,r12,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
 	beq+	3f
 	/* From user and task is ptraced - load up global dbcr0 */
 	li	r12,-1			/* clear all pending debug events */
@@ -141,13 +177,14 @@ transfer_to_handler:
 	cmplw	r1,r9			/* if r1 <= ksp_limit */
 	ble-	stack_ovf		/* then the kernel stack overflowed */
 5:
-#ifdef CONFIG_6xx
+#if defined(CONFIG_6xx) || defined(CONFIG_E500)
 	rlwinm	r9,r1,0,0,31-THREAD_SHIFT
 	tophys(r9,r9)			/* check local flags */
 	lwz	r12,TI_LOCAL_FLAGS(r9)
 	mtcrf	0x01,r12
 	bt-	31-TLF_NAPPING,4f
-#endif /* CONFIG_6xx */
+	bt-	31-TLF_SLEEPING,7f
+#endif /* CONFIG_6xx || CONFIG_E500 */
 	.globl transfer_to_handler_cont
 transfer_to_handler_cont:
 3:
@@ -160,10 +197,17 @@ transfer_to_handler_cont:
 	SYNC
 	RFI				/* jump to handler, enable MMU */
 
-#ifdef CONFIG_6xx
+#if defined (CONFIG_6xx) || defined(CONFIG_E500)
 4:	rlwinm	r12,r12,0,~_TLF_NAPPING
 	stw	r12,TI_LOCAL_FLAGS(r9)
-	b	power_save_6xx_restore
+	b	power_save_ppc32_restore
+
+7:	rlwinm	r12,r12,0,~_TLF_SLEEPING
+	stw	r12,TI_LOCAL_FLAGS(r9)
+	lwz	r9,_MSR(r11)		/* if sleeping, clear MSR.EE */
+	rlwinm	r9,r9,0,~MSR_EE
+	lwz	r12,_LINK(r11)		/* and return to address in LR */
+	b	fast_exception_return
 #endif
 
 /*
@@ -248,7 +292,7 @@ syscall_exit_cont:
 	/* If the process has its own DBCR0 value, load it up.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IDM@h
+	andis.	r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
 	bnel-	load_dbcr0
 #endif
 #ifdef CONFIG_44x
@@ -668,7 +712,7 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 	/* Check current_thread_info()->flags */
 	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
 	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
+	andi.	r0,r9,_TIF_USER_WORK_MASK
 	bne	do_work
 
 restore_user:
@@ -676,7 +720,7 @@ restore_user:
 	/* Check whether this process has its own DBCR0 value.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IDM@h
+	andis.	r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
 	bnel-	load_dbcr0
 #endif
 
@@ -859,17 +903,90 @@ exc_exit_restart_end:
 	exc_lvl_rfi;							\
 	b	.;		/* prevent prefetch past exc_lvl_rfi */
 
+#define	RESTORE_xSRR(exc_lvl_srr0, exc_lvl_srr1)			\
+	lwz	r9,_##exc_lvl_srr0(r1);					\
+	lwz	r10,_##exc_lvl_srr1(r1);				\
+	mtspr	SPRN_##exc_lvl_srr0,r9;					\
+	mtspr	SPRN_##exc_lvl_srr1,r10;
+
+#if defined(CONFIG_FSL_BOOKE)
+#ifdef CONFIG_PHYS_64BIT
+#define	RESTORE_MAS7							\
+	lwz	r11,MAS7(r1);						\
+	mtspr	SPRN_MAS7,r11;
+#else
+#define	RESTORE_MAS7
+#endif /* CONFIG_PHYS_64BIT */
+#define RESTORE_MMU_REGS						\
+	lwz	r9,MAS0(r1);						\
+	lwz	r10,MAS1(r1);						\
+	lwz	r11,MAS2(r1);						\
+	mtspr	SPRN_MAS0,r9;						\
+	lwz	r9,MAS3(r1);						\
+	mtspr	SPRN_MAS1,r10;						\
+	lwz	r10,MAS6(r1);						\
+	mtspr	SPRN_MAS2,r11;						\
+	mtspr	SPRN_MAS3,r9;						\
+	mtspr	SPRN_MAS6,r10;						\
+	RESTORE_MAS7;
+#elif defined(CONFIG_44x)
+#define RESTORE_MMU_REGS						\
+	lwz	r9,MMUCR(r1);						\
+	mtspr	SPRN_MMUCR,r9;
+#else
+#define RESTORE_MMU_REGS
+#endif
+
+#ifdef CONFIG_40x
 	.globl	ret_from_crit_exc
 ret_from_crit_exc:
+	mfspr	r9,SPRN_SPRG3
+	lis	r10,saved_ksp_limit@ha;
+	lwz	r10,saved_ksp_limit@l(r10);
+	tovirt(r9,r9);
+	stw	r10,KSP_LIMIT(r9)
+	lis	r9,crit_srr0@ha;
+	lwz	r9,crit_srr0@l(r9);
+	lis	r10,crit_srr1@ha;
+	lwz	r10,crit_srr1@l(r10);
+	mtspr	SPRN_SRR0,r9;
+	mtspr	SPRN_SRR1,r10;
 	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+#endif /* CONFIG_40x */
 
 #ifdef CONFIG_BOOKE
+	.globl	ret_from_crit_exc
+ret_from_crit_exc:
+	mfspr	r9,SPRN_SPRG3
+	lwz	r10,SAVED_KSP_LIMIT(r1)
+	stw	r10,KSP_LIMIT(r9)
+	RESTORE_xSRR(SRR0,SRR1);
+	RESTORE_MMU_REGS;
+	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+
 	.globl	ret_from_debug_exc
 ret_from_debug_exc:
+	mfspr	r9,SPRN_SPRG3
+	lwz	r10,SAVED_KSP_LIMIT(r1)
+	stw	r10,KSP_LIMIT(r9)
+	lwz	r9,THREAD_INFO-THREAD(r9)
+	rlwinm	r10,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r10,TI_PREEMPT(r10)
+	stw	r10,TI_PREEMPT(r9)
+	RESTORE_xSRR(SRR0,SRR1);
+	RESTORE_xSRR(CSRR0,CSRR1);
+	RESTORE_MMU_REGS;
 	RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI)
 
 	.globl	ret_from_mcheck_exc
 ret_from_mcheck_exc:
+	mfspr	r9,SPRN_SPRG3
+	lwz	r10,SAVED_KSP_LIMIT(r1)
+	stw	r10,KSP_LIMIT(r9)
+	RESTORE_xSRR(SRR0,SRR1);
+	RESTORE_xSRR(CSRR0,CSRR1);
+	RESTORE_xSRR(DSRR0,DSRR1);
+	RESTORE_MMU_REGS;
 	RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI)
 #endif /* CONFIG_BOOKE */
 
@@ -925,7 +1042,7 @@ recheck:
 	lwz	r9,TI_FLAGS(r9)
 	andi.	r0,r9,_TIF_NEED_RESCHED
 	bne-	do_resched
-	andi.	r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK
+	andi.	r0,r9,_TIF_USER_WORK_MASK
 	beq	restore_user
 do_user_signal:			/* r10 contains MSR_KERNEL here */
 	ori	r10,r10,MSR_EE
@@ -1035,3 +1152,129 @@ machine_check_in_rtas:
 	/* XXX load up BATs and panic */
 
 #endif /* CONFIG_PPC_RTAS */
+
+#ifdef CONFIG_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE
+_GLOBAL(mcount)
+_GLOBAL(_mcount)
+	stwu	r1,-48(r1)
+	stw	r3, 12(r1)
+	stw	r4, 16(r1)
+	stw	r5, 20(r1)
+	stw	r6, 24(r1)
+	mflr	r3
+	stw	r7, 28(r1)
+	mfcr	r5
+	stw	r8, 32(r1)
+	stw	r9, 36(r1)
+	stw	r10,40(r1)
+	stw	r3, 44(r1)
+	stw	r5, 8(r1)
+	subi	r3, r3, MCOUNT_INSN_SIZE
+	.globl mcount_call
+mcount_call:
+	bl	ftrace_stub
+	nop
+	lwz	r6, 8(r1)
+	lwz	r0, 44(r1)
+	lwz	r3, 12(r1)
+	mtctr	r0
+	lwz	r4, 16(r1)
+	mtcr	r6
+	lwz	r5, 20(r1)
+	lwz	r6, 24(r1)
+	lwz	r0, 52(r1)
+	lwz	r7, 28(r1)
+	lwz	r8, 32(r1)
+	mtlr	r0
+	lwz	r9, 36(r1)
+	lwz	r10,40(r1)
+	addi	r1, r1, 48
+	bctr
+
+_GLOBAL(ftrace_caller)
+	/* Based off of objdump optput from glibc */
+	stwu	r1,-48(r1)
+	stw	r3, 12(r1)
+	stw	r4, 16(r1)
+	stw	r5, 20(r1)
+	stw	r6, 24(r1)
+	mflr	r3
+	lwz	r4, 52(r1)
+	mfcr	r5
+	stw	r7, 28(r1)
+	stw	r8, 32(r1)
+	stw	r9, 36(r1)
+	stw	r10,40(r1)
+	stw	r3, 44(r1)
+	stw	r5, 8(r1)
+	subi	r3, r3, MCOUNT_INSN_SIZE
+.globl ftrace_call
+ftrace_call:
+	bl	ftrace_stub
+	nop
+	lwz	r6, 8(r1)
+	lwz	r0, 44(r1)
+	lwz	r3, 12(r1)
+	mtctr	r0
+	lwz	r4, 16(r1)
+	mtcr	r6
+	lwz	r5, 20(r1)
+	lwz	r6, 24(r1)
+	lwz	r0, 52(r1)
+	lwz	r7, 28(r1)
+	lwz	r8, 32(r1)
+	mtlr	r0
+	lwz	r9, 36(r1)
+	lwz	r10,40(r1)
+	addi	r1, r1, 48
+	bctr
+#else
+_GLOBAL(mcount)
+_GLOBAL(_mcount)
+	stwu	r1,-48(r1)
+	stw	r3, 12(r1)
+	stw	r4, 16(r1)
+	stw	r5, 20(r1)
+	stw	r6, 24(r1)
+	mflr	r3
+	lwz	r4, 52(r1)
+	mfcr	r5
+	stw	r7, 28(r1)
+	stw	r8, 32(r1)
+	stw	r9, 36(r1)
+	stw	r10,40(r1)
+	stw	r3, 44(r1)
+	stw	r5, 8(r1)
+
+	subi	r3, r3, MCOUNT_INSN_SIZE
+	LOAD_REG_ADDR(r5, ftrace_trace_function)
+	lwz	r5,0(r5)
+
+	mtctr	r5
+	bctrl
+
+	nop
+
+	lwz	r6, 8(r1)
+	lwz	r0, 44(r1)
+	lwz	r3, 12(r1)
+	mtctr	r0
+	lwz	r4, 16(r1)
+	mtcr	r6
+	lwz	r5, 20(r1)
+	lwz	r6, 24(r1)
+	lwz	r0, 52(r1)
+	lwz	r7, 28(r1)
+	lwz	r8, 32(r1)
+	mtlr	r0
+	lwz	r9, 36(r1)
+	lwz	r10,40(r1)
+	addi	r1, r1, 48
+	bctr
+#endif
+
+_GLOBAL(ftrace_stub)
+	blr
+
+#endif /* CONFIG_MCOUNT */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index c0db5b769e55..d7369243ae44 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -31,6 +31,7 @@
 #include <asm/bug.h>
 #include <asm/ptrace.h>
 #include <asm/irqflags.h>
+#include <asm/ftrace.h>
 
 /*
  * System calls.
@@ -353,6 +354,11 @@ _GLOBAL(_switch)
 	mflr	r20		/* Return to switch caller */
 	mfmsr	r22
 	li	r0, MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r0,r0,MSR_VSX@h	/* Disable VSX */
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	oris	r0,r0,MSR_VEC@h	/* Disable altivec */
@@ -383,16 +389,16 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
 	ld	r8,KSP(r4)	/* new stack pointer */
 BEGIN_FTR_SECTION
-	b	2f
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-BEGIN_FTR_SECTION
+  BEGIN_FTR_SECTION_NESTED(95)
 	clrrdi	r6,r8,28	/* get its ESID */
 	clrrdi	r9,r1,28	/* get current sp ESID */
-END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
-BEGIN_FTR_SECTION
+  FTR_SECTION_ELSE_NESTED(95)
 	clrrdi	r6,r8,40	/* get its 1T ESID */
 	clrrdi	r9,r1,40	/* get current sp 1T ESID */
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+  ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_1T_SEGMENT, 95)
+FTR_SECTION_ELSE
+	b	2f
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_SLB)
 	clrldi.	r0,r6,2		/* is new ESID c00000000? */
 	cmpd	cr1,r6,r9	/* or is new ESID the same as current ESID? */
 	cror	eq,4*cr1+eq,eq
@@ -870,3 +876,67 @@ _GLOBAL(enter_prom)
 	ld	r0,16(r1)
 	mtlr    r0
         blr
+
+#ifdef CONFIG_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE
+_GLOBAL(mcount)
+_GLOBAL(_mcount)
+	/* Taken from output of objdump from lib64/glibc */
+	mflr	r3
+	stdu	r1, -112(r1)
+	std	r3, 128(r1)
+	subi	r3, r3, MCOUNT_INSN_SIZE
+	.globl mcount_call
+mcount_call:
+	bl	ftrace_stub
+	nop
+	ld	r0, 128(r1)
+	mtlr	r0
+	addi	r1, r1, 112
+	blr
+
+_GLOBAL(ftrace_caller)
+	/* Taken from output of objdump from lib64/glibc */
+	mflr	r3
+	ld	r11, 0(r1)
+	stdu	r1, -112(r1)
+	std	r3, 128(r1)
+	ld	r4, 16(r11)
+	subi	r3, r3, MCOUNT_INSN_SIZE
+.globl ftrace_call
+ftrace_call:
+	bl	ftrace_stub
+	nop
+	ld	r0, 128(r1)
+	mtlr	r0
+	addi	r1, r1, 112
+_GLOBAL(ftrace_stub)
+	blr
+#else
+_GLOBAL(mcount)
+	blr
+
+_GLOBAL(_mcount)
+	/* Taken from output of objdump from lib64/glibc */
+	mflr	r3
+	ld	r11, 0(r1)
+	stdu	r1, -112(r1)
+	std	r3, 128(r1)
+	ld	r4, 16(r11)
+
+	subi	r3, r3, MCOUNT_INSN_SIZE
+	LOAD_REG_ADDR(r5,ftrace_trace_function)
+	ld	r5,0(r5)
+	ld	r5,0(r5)
+	mtctr	r5
+	bctrl
+
+	nop
+	ld	r0, 128(r1)
+	mtlr	r0
+	addi	r1, r1, 112
+_GLOBAL(ftrace_stub)
+	blr
+
+#endif
+#endif
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 821e152e093c..a088c064ae40 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -24,6 +24,29 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 
+#ifdef CONFIG_VSX
+#define REST_32FPVSRS(n,c,base)						\
+BEGIN_FTR_SECTION							\
+	b	2f;							\
+END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
+	REST_32FPRS(n,base);						\
+	b	3f;							\
+2:	REST_32VSRS(n,c,base);						\
+3:
+
+#define SAVE_32FPVSRS(n,c,base)						\
+BEGIN_FTR_SECTION							\
+	b	2f;							\
+END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
+	SAVE_32FPRS(n,base);						\
+	b	3f;							\
+2:	SAVE_32VSRS(n,c,base);						\
+3:
+#else
+#define REST_32FPVSRS(n,b,base)	REST_32FPRS(n, base)
+#define SAVE_32FPVSRS(n,b,base)	SAVE_32FPRS(n, base)
+#endif
+
 /*
  * This task wants to use the FPU now.
  * On UP, disable FP for the task which had the FPU previously,
@@ -34,6 +57,11 @@
 _GLOBAL(load_up_fpu)
 	mfmsr	r5
 	ori	r5,r5,MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r5,r5,MSR_VSX@h
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
 	SYNC
 	MTMSRD(r5)			/* enable use of fpu now */
 	isync
@@ -50,7 +78,7 @@ _GLOBAL(load_up_fpu)
 	beq	1f
 	toreal(r4)
 	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
-	SAVE_32FPRS(0, r4)
+	SAVE_32FPVSRS(0, r5, r4)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r4)
 	PPC_LL	r5,PT_REGS(r4)
@@ -77,7 +105,7 @@ _GLOBAL(load_up_fpu)
 #endif
 	lfd	fr0,THREAD_FPSCR(r5)
 	MTFSF_L(fr0)
-	REST_32FPRS(0, r5)
+	REST_32FPVSRS(0, r4, r5)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
 	fromreal(r4)
@@ -85,7 +113,7 @@ _GLOBAL(load_up_fpu)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
 	/* we haven't used ctr or xer or lr */
-	b	fast_exception_return
+	blr
 
 /*
  * giveup_fpu(tsk)
@@ -96,6 +124,11 @@ _GLOBAL(load_up_fpu)
 _GLOBAL(giveup_fpu)
 	mfmsr	r5
 	ori	r5,r5,MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r5,r5,MSR_VSX@h
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
 	SYNC_601
 	ISYNC_601
 	MTMSRD(r5)			/* enable use of fpu now */
@@ -106,7 +139,7 @@ _GLOBAL(giveup_fpu)
 	addi	r3,r3,THREAD	        /* want THREAD of task */
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r5,0
-	SAVE_32FPRS(0, r3)
+	SAVE_32FPVSRS(0, r4 ,r3)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r3)
 	beq	1f
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
new file mode 100644
index 000000000000..3855ceb937b0
--- /dev/null
+++ b/arch/powerpc/kernel/ftrace.c
@@ -0,0 +1,154 @@
+/*
+ * Code for replacing ftrace calls with jumps.
+ *
+ * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
+ *
+ * Thanks goes out to P.A. Semi, Inc for supplying me with a PPC64 box.
+ *
+ */
+
+#include <linux/spinlock.h>
+#include <linux/hardirq.h>
+#include <linux/ftrace.h>
+#include <linux/percpu.h>
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include <asm/cacheflush.h>
+#include <asm/ftrace.h>
+
+
+static unsigned int ftrace_nop = 0x60000000;
+
+#ifdef CONFIG_PPC32
+# define GET_ADDR(addr) addr
+#else
+/* PowerPC64's functions are data that points to the functions */
+# define GET_ADDR(addr) *(unsigned long *)addr
+#endif
+
+
+static unsigned int notrace ftrace_calc_offset(long ip, long addr)
+{
+	return (int)(addr - ip);
+}
+
+notrace unsigned char *ftrace_nop_replace(void)
+{
+	return (char *)&ftrace_nop;
+}
+
+notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
+{
+	static unsigned int op;
+
+	/*
+	 * It would be nice to just use create_function_call, but that will
+	 * update the code itself. Here we need to just return the
+	 * instruction that is going to be modified, without modifying the
+	 * code.
+	 */
+	addr = GET_ADDR(addr);
+
+	/* Set to "bl addr" */
+	op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffc);
+
+	/*
+	 * No locking needed, this must be called via kstop_machine
+	 * which in essence is like running on a uniprocessor machine.
+	 */
+	return (unsigned char *)&op;
+}
+
+#ifdef CONFIG_PPC64
+# define _ASM_ALIGN	" .align 3 "
+# define _ASM_PTR	" .llong "
+#else
+# define _ASM_ALIGN	" .align 2 "
+# define _ASM_PTR	" .long "
+#endif
+
+notrace int
+ftrace_modify_code(unsigned long ip, unsigned char *old_code,
+		   unsigned char *new_code)
+{
+	unsigned replaced;
+	unsigned old = *(unsigned *)old_code;
+	unsigned new = *(unsigned *)new_code;
+	int faulted = 0;
+
+	/*
+	 * Note: Due to modules and __init, code can
+	 *  disappear and change, we need to protect against faulting
+	 *  as well as code changing.
+	 *
+	 * No real locking needed, this code is run through
+	 * kstop_machine.
+	 */
+	asm volatile (
+		"1: lwz		%1, 0(%2)\n"
+		"   cmpw	%1, %5\n"
+		"   bne		2f\n"
+		"   stwu	%3, 0(%2)\n"
+		"2:\n"
+		".section .fixup, \"ax\"\n"
+		"3:	li %0, 1\n"
+		"	b 2b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		_ASM_ALIGN "\n"
+		_ASM_PTR "1b, 3b\n"
+		".previous"
+		: "=r"(faulted), "=r"(replaced)
+		: "r"(ip), "r"(new),
+		  "0"(faulted), "r"(old)
+		: "memory");
+
+	if (replaced != old && replaced != new)
+		faulted = 2;
+
+	if (!faulted)
+		flush_icache_range(ip, ip + 8);
+
+	return faulted;
+}
+
+notrace int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned long ip = (unsigned long)(&ftrace_call);
+	unsigned char old[MCOUNT_INSN_SIZE], *new;
+	int ret;
+
+	memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(ip, (unsigned long)func);
+	ret = ftrace_modify_code(ip, old, new);
+
+	return ret;
+}
+
+notrace int ftrace_mcount_set(unsigned long *data)
+{
+	unsigned long ip = (long)(&mcount_call);
+	unsigned long *addr = data;
+	unsigned char old[MCOUNT_INSN_SIZE], *new;
+
+	/*
+	 * Replace the mcount stub with a pointer to the
+	 * ip recorder function.
+	 */
+	memcpy(old, &mcount_call, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(ip, *addr);
+	*addr = ftrace_modify_code(ip, old, new);
+
+	return 0;
+}
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	/* This is running in kstop_machine */
+
+	ftrace_mcount_set(data);
+
+	return 0;
+}
+
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 785af9b56591..99ee2f0f0f2b 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -421,8 +421,10 @@ BEGIN_FTR_SECTION
 	b 	ProgramCheck
 END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
 	EXCEPTION_PROLOG
-	bne	load_up_fpu		/* if from user, just load it up */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
+	beq	1f
+	bl	load_up_fpu		/* if from user, just load it up */
+	b	fast_exception_return
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
 /* Decrementer */
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 8552e67e3a8b..56d8e5d90c5b 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -93,6 +93,12 @@ _ENTRY(crit_r10)
 	.space	4
 _ENTRY(crit_r11)
 	.space	4
+_ENTRY(crit_srr0)
+	.space	4
+_ENTRY(crit_srr1)
+	.space	4
+_ENTRY(saved_ksp_limit)
+	.space	4
 
 /*
  * Exception vector entry code. This code runs with address translation
@@ -148,14 +154,14 @@ _ENTRY(crit_r11)
 	mfcr	r10;			/* save CR in r10 for now	   */\
 	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
 	andi.	r11,r11,MSR_PR;						     \
-	lis	r11,critical_stack_top@h;				     \
-	ori	r11,r11,critical_stack_top@l;				     \
+	lis	r11,critirq_ctx@ha;					     \
+	tophys(r11,r11);						     \
+	lwz	r11,critirq_ctx@l(r11);					     \
 	beq	1f;							     \
 	/* COMING FROM USER MODE */					     \
 	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+1:	addi	r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm  */\
 	tophys(r11,r11);						     \
 	stw	r10,_CCR(r11);          /* save various registers	   */\
 	stw	r12,GPR12(r11);						     \
@@ -996,16 +1002,6 @@ empty_zero_page:
 swapper_pg_dir:
 	.space	PGD_TABLE_SIZE
 
-
-/* Stack for handling critical exceptions from kernel mode */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	4096
-critical_stack_top:
-	.globl	exception_stack_top
-exception_stack_top:
-
 /* Room for two PTE pointers, usually the kernel and current user pointers
  * to their respective root page table.
  */
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 22b5d2c459a3..f3a1ea9d7fe4 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -293,119 +293,9 @@ interrupt_base:
 	MCHECK_EXCEPTION(0x0210, MachineCheckA, machine_check_exception)
 
 	/* Data Storage Interrupt */
-	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, PAGE_OFFSET@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr   r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR		/* Get MMUCR */
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr   SPRN_MMUCR,r12
-
-	rlwinm  r12, r10, 13, 19, 29    /* Compute pgdir/pmd offset */
-	lwzx    r11, r12, r11           /* Get pgd/pmd entry */
-	rlwinm. r12, r11, 0, 0, 20      /* Extract pt base address */
-	beq     2f                      /* Bail if no table */
-
-	rlwimi  r12, r10, 23, 20, 28    /* Compute pte address */
-	lwz     r11, 4(r12)             /* Get pte entry */
-
-	andi.	r13, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 4(r12)		/* Update Linux page table */
-
-	li	r13, PPC44x_TLB_SR@l	/* Set SR */
-	rlwimi	r13, r11, 29, 29, 29	/* SX = _PAGE_HWEXEC */
-	rlwimi	r13, r11, 0, 30, 30	/* SW = _PAGE_RW */
-	rlwimi	r13, r11, 29, 28, 28	/* UR = _PAGE_USER */
-	rlwimi	r12, r11, 31, 26, 26	/* (_PAGE_USER>>1)->r12 */
-	rlwimi	r12, r11, 29, 30, 30	/* (_PAGE_USER>>3)->r12 */
-	and	r12, r12, r11		/* HWEXEC/RW & USER */
-	rlwimi	r13, r12, 0, 26, 26	/* UX = HWEXEC & USER */
-	rlwimi	r13, r12, 3, 27, 27	/* UW = RW & USER */
-
-	rlwimi	r11,r13,0,26,31		/* Insert static perms */
-
-	/*
-	 * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
-	 * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
-	 * include/asm-powerpc/pgtable-ppc32.h for details).
-	 */
-	rlwinm	r11,r11,0,20,10
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	r10, 0, r10
-
-	tlbwe	r11, r10, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
-
-	/* Done...restore registers and get out of here.
-	*/
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
+	DATA_STORAGE_EXCEPTION
 
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction Storage Interrupt */
+		/* Instruction Storage Interrupt */
 	INSTRUCTION_STORAGE_EXCEPTION
 
 	/* External Input Interrupt */
@@ -423,7 +313,6 @@ interrupt_base:
 #else
 	EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
 #endif
-
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
 	NORMAL_EXCEPTION_PROLOG
@@ -484,18 +373,57 @@ interrupt_base:
 4:
 	mtspr	SPRN_MMUCR,r12
 
+	/* Mask of required permission bits. Note that while we
+	 * do copy ESR:ST to _PAGE_RW position as trying to write
+	 * to an RO page is pretty common, we don't do it with
+	 * _PAGE_DIRTY. We could do it, but it's a fairly rare
+	 * event so I'd rather take the overhead when it happens
+	 * rather than adding an instruction here. We should measure
+	 * whether the whole thing is worth it in the first place
+	 * as we could avoid loading SPRN_ESR completely in the first
+	 * place...
+	 *
+	 * TODO: Is it worth doing that mfspr & rlwimi in the first
+	 *       place or can we save a couple of instructions here ?
+	 */
+	mfspr	r12,SPRN_ESR
+	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+	rlwimi	r13,r12,10,30,30
+
+	/* Load the PTE */
 	rlwinm 	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
 	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
 	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
 	beq	2f			/* Bail if no table */
 
 	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	lwz	r11, 0(r12)		/* Get high word of pte entry */
+	lwz	r12, 4(r12)		/* Get low word of pte entry */
 
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
+	lis	r10,tlb_44x_index@ha
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	/* Load the next available TLB index */
+	lwz	r13,tlb_44x_index@l(r10)
+
+	bne	2f			/* Bail if permission mismach */
+
+	/* Increment, rollover, and store TLB index */
+	addi	r13,r13,1
+
+	/* Compare with watermark (instruction gets patched) */
+	.globl tlb_44x_patch_hwater_D
+tlb_44x_patch_hwater_D:
+	cmpwi	0,r13,1			/* reserve entries */
+	ble	5f
+	li	r13,0
+5:
+	/* Store the next available TLB index */
+	stw	r13,tlb_44x_index@l(r10)
+
+	/* Re-load the faulting address */
+	mfspr	r10,SPRN_DEAR
 
 	 /* Jump to common tlb load */
 	b	finish_tlb_load
@@ -510,7 +438,7 @@ interrupt_base:
 	mfspr	r12, SPRN_SPRG4R
 	mfspr	r11, SPRN_SPRG1
 	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
 	/*
@@ -554,18 +482,42 @@ interrupt_base:
 4:
 	mtspr	SPRN_MMUCR,r12
 
+	/* Make up the required permissions */
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+
 	rlwinm	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
 	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
 	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
 	beq	2f			/* Bail if no table */
 
 	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	lwz	r11, 0(r12)		/* Get high word of pte entry */
+	lwz	r12, 4(r12)		/* Get low word of pte entry */
 
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
+	lis	r10,tlb_44x_index@ha
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	/* Load the next available TLB index */
+	lwz	r13,tlb_44x_index@l(r10)
+
+	bne	2f			/* Bail if permission mismach */
+
+	/* Increment, rollover, and store TLB index */
+	addi	r13,r13,1
+
+	/* Compare with watermark (instruction gets patched) */
+	.globl tlb_44x_patch_hwater_I
+tlb_44x_patch_hwater_I:
+	cmpwi	0,r13,1			/* reserve entries */
+	ble	5f
+	li	r13,0
+5:
+	/* Store the next available TLB index */
+	stw	r13,tlb_44x_index@l(r10)
+
+	/* Re-load the faulting address */
+	mfspr	r10,SPRN_SRR0
 
 	/* Jump to common TLB load point */
 	b	finish_tlb_load
@@ -587,86 +539,40 @@ interrupt_base:
 
 /*
  * Local functions
- */
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+  */
 
 /*
 
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  * 	r10 - EA of fault
- * 	r11 - available to use
- *	r12 - Pointer to the 64-bit PTE
- *	r13 - available to use
+ * 	r11 - PTE high word value
+ *	r12 - PTE low word value
+ *	r13 - TLB index
  *	MMUCR - loaded with proper value when we get here
  *	Upon exit, we reload everything and RFI.
  */
 finish_tlb_load:
-	/*
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-
-	/* Load the next available TLB index */
-	lis	r13, tlb_44x_index@ha
-	lwz	r13, tlb_44x_index@l(r13)
-	/* Load the TLB high watermark */
-	lis	r11, tlb_44x_hwater@ha
-	lwz	r11, tlb_44x_hwater@l(r11)
-
-	/* Increment, rollover, and store TLB index */
-	addi	r13, r13, 1
-	cmpw	0, r13, r11			/* reserve entries */
-	ble	7f
-	li	r13, 0
-7:
-	/* Store the next available TLB index */
-	lis	r11, tlb_44x_index@ha
-	stw	r13, tlb_44x_index@l(r11)
-
-	lwz	r11, 0(r12)			/* Get MS word of PTE */
-	lwz	r12, 4(r12)			/* Get LS word of PTE */
-	rlwimi	r11, r12, 0, 0 , 19		/* Insert RPN */
-	tlbwe	r11, r13, PPC44x_TLB_XLAT	/* Write XLAT */
+	/* Combine RPN & ERPN an write WS 0 */
+	rlwimi	r11,r12,0,0,19
+	tlbwe	r11,r13,PPC44x_TLB_XLAT
 
 	/*
-	 * Create PAGEID. This is the faulting address,
+	 * Create WS1. This is the faulting address (EPN),
 	 * page size, and valid flag.
 	 */
-	li	r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
-	rlwimi	r10, r11, 0, 20, 31		/* Insert valid and page size */
-	tlbwe	r10, r13, PPC44x_TLB_PAGEID	/* Write PAGEID */
-
-	li	r10, PPC44x_TLB_SR@l		/* Set SR */
-	rlwimi	r10, r12, 0, 30, 30		/* Set SW = _PAGE_RW */
-	rlwimi	r10, r12, 29, 29, 29		/* SX = _PAGE_HWEXEC */
-	rlwimi	r10, r12, 29, 28, 28		/* UR = _PAGE_USER */
-	rlwimi	r11, r12, 31, 26, 26		/* (_PAGE_USER>>1)->r12 */
-	and	r11, r12, r11			/* HWEXEC & USER */
-	rlwimi	r10, r11, 0, 26, 26		/* UX = HWEXEC & USER */
-
-	rlwimi	r12, r10, 0, 26, 31		/* Insert static perms */
-
-	/*
-	 * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
-	 * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
-	 * include/asm-powerpc/pgtable-ppc32.h for details).
-	 */
-	rlwinm	r12, r12, 0, 20, 10
-
-	tlbwe	r12, r13, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
+	li	r11,PPC44x_TLB_VALID | PPC44x_TLB_4K
+	rlwimi	r10,r11,0,20,31			/* Insert valid and page size*/
+	tlbwe	r10,r13,PPC44x_TLB_PAGEID	/* Write PAGEID */
+
+	/* And WS 2 */
+	li	r10,0xf85			/* Mask to apply from PTE */
+	rlwimi	r10,r12,29,30,30		/* DIRTY -> SW position */
+	and	r11,r12,r10			/* Mask PTE bits to keep */
+	andi.	r10,r12,_PAGE_USER		/* User page ? */
+	beq	1f				/* nope, leave U bits empty */
+	rlwimi	r11,r11,3,26,28			/* yes, copy S bits to U */
+1:	tlbwe	r11,r13,PPC44x_TLB_ATTRIB	/* Write ATTRIB */
 
 	/* Done...restore registers and get out of here.
 	*/
@@ -742,15 +648,6 @@ empty_zero_page:
 swapper_pg_dir:
 	.space	PGD_TABLE_SIZE
 
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE
-	.globl	exception_stack_top
-exception_stack_top:
-
 /*
  * Room for two PTE pointers, usually the kernel and current user pointers
  * to their respective root page table.
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 25e84c0e1166..cc8fb474d520 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -275,7 +275,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	. = 0xf00
 	b	performance_monitor_pSeries
 
-	STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable)
+	. = 0xf20
+	b	altivec_unavailable_pSeries
+
+	. = 0xf40
+	b	vsx_unavailable_pSeries
 
 #ifdef CONFIG_CBE_RAS
 	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
@@ -295,6 +299,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 
 	/* moved from 0xf00 */
 	STD_EXCEPTION_PSERIES(., performance_monitor)
+	STD_EXCEPTION_PSERIES(., altivec_unavailable)
+	STD_EXCEPTION_PSERIES(., vsx_unavailable)
 
 /*
  * An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -739,7 +745,8 @@ fp_unavailable_common:
 	ENABLE_INTS
 	bl	.kernel_fp_unavailable_exception
 	BUG_OPCODE
-1:	b	.load_up_fpu
+1:	bl	.load_up_fpu
+	b	fast_exception_return
 
 	.align	7
 	.globl altivec_unavailable_common
@@ -747,7 +754,10 @@ altivec_unavailable_common:
 	EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
-	bne	.load_up_altivec	/* if from user, just load it up */
+	beq	1f
+	bl	.load_up_altivec
+	b	fast_exception_return
+1:
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif
 	bl	.save_nvgprs
@@ -827,9 +837,70 @@ _STATIC(load_up_altivec)
 	std	r4,0(r3)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
-	b	fast_exception_return
+	blr
 #endif /* CONFIG_ALTIVEC */
 
+	.align	7
+	.globl vsx_unavailable_common
+vsx_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	bne	.load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.vsx_unavailable_exception
+	b	.ret_from_except
+
+#ifdef CONFIG_VSX
+/*
+ * load_up_vsx(unused, unused, tsk)
+ * Disable VSX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Reuse the fp and vsx saves, but first check to see if they have
+ * been saved already.
+ * On entry: r13 == 'current' && last_task_used_vsx != 'current'
+ */
+_STATIC(load_up_vsx)
+/* Load FP and VSX registers if they haven't been done yet */
+	andi.	r5,r12,MSR_FP
+	beql+	load_up_fpu		/* skip if already loaded */
+	andis.	r5,r12,MSR_VEC@h
+	beql+	load_up_altivec		/* skip if already loaded */
+
+#ifndef CONFIG_SMP
+	ld	r3,last_task_used_vsx@got(r2)
+	ld	r4,0(r3)
+	cmpdi	0,r4,0
+	beq	1f
+	/* Disable VSX for last_task_used_vsx */
+	addi	r4,r4,THREAD
+	ld	r5,PT_REGS(r4)
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r6,MSR_VSX@h
+	andc	r6,r4,r6
+	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	ld	r4,PACACURRENT(r13)
+	addi	r4,r4,THREAD		/* Get THREAD */
+	li	r6,1
+	stw	r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
+	/* enable use of VSX after return */
+	oris	r12,r12,MSR_VSX@h
+	std	r12,_MSR(r1)
+#ifndef CONFIG_SMP
+	/* Update last_task_used_math to 'current' */
+	ld	r4,PACACURRENT(r13)
+	std	r4,0(r3)
+#endif /* CONFIG_SMP */
+	b	fast_exception_return
+#endif /* CONFIG_VSX */
+
 /*
  * Hash table stuff
  */
@@ -1127,7 +1198,6 @@ _GLOBAL(generic_secondary_smp_init)
 3:	HMT_LOW
 	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor should */
 					/* start.			 */
-	sync
 
 #ifndef CONFIG_SMP
 	b	3b			/* Never go on non-SMP		 */
@@ -1135,6 +1205,8 @@ _GLOBAL(generic_secondary_smp_init)
 	cmpwi	0,r23,0
 	beq	3b			/* Loop until told to go	 */
 
+	sync				/* order paca.run and cur_cpu_spec */
+
 	/* See if we need to call a cpu state restore handler */
 	LOAD_REG_IMMEDIATE(r23, cur_cpu_spec)
 	ld	r23,0(r23)
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index aefafc6330c9..fce2df988504 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -43,9 +43,7 @@
 	SAVE_2GPRS(7, r11)
 
 /* To handle the additional exception priority levels on 40x and Book-E
- * processors we allocate a 4k stack per additional priority level. The various
- * head_xxx.S files allocate space (exception_stack_top) for each priority's
- * stack times the number of CPUs
+ * processors we allocate a stack per additional priority level.
  *
  * On 40x critical is the only additional level
  * On 44x/e500 we have critical and machine check
@@ -61,36 +59,37 @@
  * going to critical or their own debug level we aren't currently
  * providing configurations that micro-optimize space usage.
  */
-#ifdef CONFIG_44x
-#define NUM_EXCEPTION_LVLS	2
-#else
-#define NUM_EXCEPTION_LVLS	3
-#endif
-#define BOOKE_EXCEPTION_STACK_SIZE	(4096 * NUM_EXCEPTION_LVLS)
 
 /* CRIT_SPRG only used in critical exception handling */
 #define CRIT_SPRG	SPRN_SPRG2
 /* MCHECK_SPRG only used in machine check exception handling */
 #define MCHECK_SPRG	SPRN_SPRG6W
 
-#define MCHECK_STACK_TOP	(exception_stack_top - 4096)
-#define CRIT_STACK_TOP		(exception_stack_top)
+#define MCHECK_STACK_BASE	mcheckirq_ctx
+#define CRIT_STACK_BASE		critirq_ctx
 
-/* only on e200 for now */
-#define DEBUG_STACK_TOP		(exception_stack_top - 8192)
+/* only on e500mc/e200 */
+#define DEBUG_STACK_BASE	dbgirq_ctx
+#ifdef CONFIG_PPC_E500MC
+#define DEBUG_SPRG		SPRN_SPRG9
+#else
 #define DEBUG_SPRG		SPRN_SPRG6W
+#endif
+
+#define EXC_LVL_FRAME_OVERHEAD	(THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
 
 #ifdef CONFIG_SMP
 #define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
 	mfspr	r8,SPRN_PIR;				\
-	mulli	r8,r8,BOOKE_EXCEPTION_STACK_SIZE;	\
-	neg	r8,r8;					\
-	addis	r8,r8,level##_STACK_TOP@ha;		\
-	addi	r8,r8,level##_STACK_TOP@l
+	slwi	r8,r8,2;				\
+	addis	r8,r8,level##_STACK_BASE@ha;		\
+	lwz	r8,level##_STACK_BASE@l(r8);		\
+	addi	r8,r8,EXC_LVL_FRAME_OVERHEAD;
 #else
 #define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
-	lis	r8,level##_STACK_TOP@h;			\
-	ori	r8,r8,level##_STACK_TOP@l
+	lis	r8,level##_STACK_BASE@ha;		\
+	lwz	r8,level##_STACK_BASE@l(r8);		\
+	addi	r8,r8,EXC_LVL_FRAME_OVERHEAD;
 #endif
 
 /*
@@ -104,22 +103,36 @@
 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
 	mtspr	exc_level##_SPRG,r8;					     \
 	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
-	stw	r10,GPR10-INT_FRAME_SIZE(r8);				     \
-	stw	r11,GPR11-INT_FRAME_SIZE(r8);				     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,exc_level_srr1;	/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	mr	r11,r8;							     \
-	mfspr	r8,exc_level##_SPRG;					     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
+	stw	r9,GPR9(r8);		/* save various registers	   */\
+	mfcr	r9;			/* save CR in r9 for now	   */\
+	stw	r10,GPR10(r8);						     \
+	stw	r11,GPR11(r8);						     \
+	stw	r9,_CCR(r8);		/* save CR on stack		   */\
+	mfspr	r10,exc_level_srr1;	/* check whether user or kernel    */\
+	andi.	r10,r10,MSR_PR;						     \
 	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
+	addi	r11,r11,EXC_LVL_FRAME_OVERHEAD;	/* allocate stack frame    */\
+	beq	1f;							     \
+	/* COMING FROM USER MODE */					     \
+	stw	r9,_CCR(r11);		/* save CR			   */\
+	lwz	r10,GPR10(r8);		/* copy regs from exception stack  */\
+	lwz	r9,GPR9(r8);						     \
+	stw	r10,GPR10(r11);						     \
+	lwz	r10,GPR11(r8);						     \
 	stw	r9,GPR9(r11);						     \
+	stw	r10,GPR11(r11);						     \
+	b	2f;							     \
+	/* COMING FROM PRIV MODE */					     \
+1:	lwz	r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r11);		     \
+	lwz	r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r11);		     \
+	stw	r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r8);			     \
+	stw	r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r8);		     \
+	lwz	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11);			     \
+	stw	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8);			     \
+	mr	r11,r8;							     \
+2:	mfspr	r8,exc_level##_SPRG;					     \
+	stw	r12,GPR12(r11);		/* save various registers	   */\
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
 	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
@@ -231,7 +244,7 @@ label:
 	 * the code where the exception occurred (since exception entry	      \
 	 * doesn't turn off DE automatically).  We simulate the effect	      \
 	 * of turning off DE on entry to an exception handler by turning      \
-	 * off DE in the CSRR1 value and clearing the debug status.	      \
+	 * off DE in the DSRR1 value and clearing the debug status.	      \
 	 */								      \
 	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
 	andis.	r10,r10,DBSR_IC@h;					      \
@@ -262,17 +275,17 @@ label:
 	lwz	r12,GPR12(r11);						      \
 	mtspr	DEBUG_SPRG,r8;						      \
 	BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
+	lwz	r10,GPR10(r8);						      \
+	lwz	r11,GPR11(r8);						      \
 	mfspr	r8,DEBUG_SPRG;						      \
 									      \
 	RFDI;								      \
 	b	.;							      \
 									      \
-	/* continue normal handling for a critical exception... */	      \
+	/* continue normal handling for a debug exception... */		      \
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
+	EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
 
 #define DEBUG_CRIT_EXCEPTION						      \
 	START_EXCEPTION(DebugCrit);					      \
@@ -315,8 +328,8 @@ label:
 	lwz	r12,GPR12(r11);						      \
 	mtspr	CRIT_SPRG,r8;						      \
 	BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
+	lwz	r10,GPR10(r8);						      \
+	lwz	r11,GPR11(r8);						      \
 	mfspr	r8,CRIT_SPRG;						      \
 									      \
 	rfci;								      \
@@ -327,6 +340,14 @@ label:
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
 
+#define DATA_STORAGE_EXCEPTION						      \
+	START_EXCEPTION(DataStorage)					      \
+	NORMAL_EXCEPTION_PROLOG;					      \
+	mfspr	r5,SPRN_ESR;		/* Grab the ESR and save it */	      \
+	stw	r5,_ESR(r11);						      \
+	mfspr	r4,SPRN_DEAR;		/* Grab the DEAR */		      \
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+
 #define INSTRUCTION_STORAGE_EXCEPTION					      \
 	START_EXCEPTION(InstructionStorage)				      \
 	NORMAL_EXCEPTION_PROLOG;					      \
@@ -363,8 +384,31 @@ label:
 #define FP_UNAVAILABLE_EXCEPTION					      \
 	START_EXCEPTION(FloatingPointUnavailable)			      \
 	NORMAL_EXCEPTION_PROLOG;					      \
-	bne	load_up_fpu;		/* if from user, just load it up */   \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
+	beq	1f;							      \
+	bl	load_up_fpu;		/* if from user, just load it up */   \
+	b	fast_exception_return;					      \
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
+#ifndef __ASSEMBLY__
+struct exception_regs {
+	unsigned long mas0;
+	unsigned long mas1;
+	unsigned long mas2;
+	unsigned long mas3;
+	unsigned long mas6;
+	unsigned long mas7;
+	unsigned long srr0;
+	unsigned long srr1;
+	unsigned long csrr0;
+	unsigned long csrr1;
+	unsigned long dsrr0;
+	unsigned long dsrr1;
+	unsigned long saved_ksp_limit;
+};
+
+/* ensure this structure is always sized to a multiple of the stack alignment */
+#define STACK_EXC_LVL_FRAME_SIZE	_ALIGN_UP(sizeof (struct exception_regs), 16)
+
+#endif /* __ASSEMBLY__ */
 #endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index e581524d85bc..3cb52fa0eda3 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -39,6 +39,7 @@
 #include <asm/thread_info.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 #include "head_booke.h"
 
 /* As with the other PowerPC ports, it is expected that when code
@@ -150,16 +151,11 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB0 */
 	li	r6,0x04
 	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
+	TLBSYNC
 	/* Invalidate TLB1 */
 	li	r6,0x0c
 	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 /* 3. Setup a temp mapping and jump to it */
 	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
@@ -237,10 +233,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB1 */
 	li	r9,0x0c
 	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 /* 6. Setup KERNELBASE mapping in TLB1[0] */
 	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
@@ -282,10 +275,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB1 */
 	li	r9,0x0c
 	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
@@ -304,7 +294,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	SET_IVOR(13, DataTLBError);
 	SET_IVOR(14, InstructionTLBError);
 	SET_IVOR(15, DebugDebug);
-#if defined(CONFIG_E500)
+#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
 	SET_IVOR(15, DebugCrit);
 #endif
 	SET_IVOR(32, SPEUnavailable);
@@ -313,6 +303,9 @@ skpinv:	addi	r6,r6,1				/* Increment */
 #ifndef CONFIG_E200
 	SET_IVOR(35, PerformanceMonitor);
 #endif
+#ifdef CONFIG_PPC_E500MC
+	SET_IVOR(36, Doorbell);
+#endif
 
 	/* Establish the interrupt vector base */
 	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
@@ -479,90 +472,16 @@ interrupt_base:
 
 	/* Data Storage Interrupt */
 	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, PAGE_OFFSET@h
-	cmplw	0, r10, r11
-	bge	2f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	FIND_PTE
-
-	/* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
-	andi.	r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
-	cmpwi	0, r13, _PAGE_RW|_PAGE_USER
-	bne	2f			/* Bail if not */
-
-	/* Update 'changed'. */
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */
-
-	/* MAS2 not updated as the entry does exist in the tlb, this
-	   fault taken to detect state transition (eg: COW -> DIRTY)
-	 */
-	andi.	r11, r11, _PAGE_HWEXEC
-	rlwimi	r11, r11, 31, 27, 27	/* SX <- _PAGE_HWEXEC */
-	ori	r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
-
-	/* update search PID in MAS6, AS = 0 */
-	mfspr	r12, SPRN_PID0
-	slwi	r12, r12, 16
-	mtspr	SPRN_MAS6, r12
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	0, r10
-
-	/* only update the perm bits, assume the RPN is fine */
-	mfspr	r12, SPRN_MAS3
-	rlwimi	r12, r11, 0, 20, 31
-	mtspr	SPRN_MAS3,r12
-	tlbwe
-
-	/* Done...restore registers and get out of here.  */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
+	bne	1f
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+1:
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
 
 	/* Instruction Storage Interrupt */
 	INSTRUCTION_STORAGE_EXCEPTION
@@ -641,15 +560,30 @@ interrupt_base:
 	lwz	r11,PGDIR(r11)
 
 4:
+	/* Mask of required permission bits. Note that while we
+	 * do copy ESR:ST to _PAGE_RW position as trying to write
+	 * to an RO page is pretty common, we don't do it with
+	 * _PAGE_DIRTY. We could do it, but it's a fairly rare
+	 * event so I'd rather take the overhead when it happens
+	 * rather than adding an instruction here. We should measure
+	 * whether the whole thing is worth it in the first place
+	 * as we could avoid loading SPRN_ESR completely in the first
+	 * place...
+	 *
+	 * TODO: Is it worth doing that mfspr & rlwimi in the first
+	 *       place or can we save a couple of instructions here ?
+	 */
+	mfspr	r12,SPRN_ESR
+	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+	rlwimi	r13,r12,11,29,29
+
 	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	andc.	r13,r13,r11		/* Check permission */
+	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
 	lwz	r13, 0(r12)
 #endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
 
 	 /* Jump to common tlb load */
 	b	finish_tlb_load
@@ -663,7 +597,7 @@ interrupt_base:
 	mfspr	r12, SPRN_SPRG4R
 	mfspr	r11, SPRN_SPRG1
 	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
 	/*
@@ -701,15 +635,16 @@ interrupt_base:
 	lwz	r11,PGDIR(r11)
 
 4:
+	/* Make up the required permissions */
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+
 	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	andc.	r13,r13,r11		/* Check permission */
+	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
 	lwz	r13, 0(r12)
 #endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
 
 	/* Jump to common TLB load point */
 	b	finish_tlb_load
@@ -750,10 +685,13 @@ interrupt_base:
 	/* Performance Monitor */
 	EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
 
+#ifdef CONFIG_PPC_E500MC
+	EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_EE)
+#endif
 
 	/* Debug Interrupt */
 	DEBUG_DEBUG_EXCEPTION
-#if defined(CONFIG_E500)
+#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
 	DEBUG_CRIT_EXCEPTION
 #endif
 
@@ -761,29 +699,13 @@ interrupt_base:
  * Local functions
  */
 
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
-	bne	1f
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-1:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
-
 /*
-
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  *	r10 - EA of fault
  *	r11 - TLB (info from Linux PTE)
- *	r12, r13 - available to use
+ *	r12 - available to use
+ *	r13 - upper bits of PTE (if PTE_64BIT) or available to use
  *	CR5 - results of addr >= PAGE_OFFSET
  *	MAS0, MAS1 - loaded with proper value when we get here
  *	MAS2, MAS3 - will need additional info from Linux PTE
@@ -805,20 +727,14 @@ finish_tlb_load:
 #endif
 	mtspr	SPRN_MAS2, r12
 
-	bge	5, 1f
-
-	/* is user addr */
-	andi.	r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
+	li	r10, (_PAGE_HWEXEC | _PAGE_PRESENT)
+	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
+	and	r12, r11, r10
 	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
-	srwi	r10, r12, 1
-	or	r12, r12, r10	/* Copy user perms into supervisor */
-	iseleq	r12, 0, r12
-	b	2f
-
-	/* is kernel addr */
-1:	rlwinm	r12, r11, 31, 29, 29	/* Extract _PAGE_HWWRITE into SW */
-	ori	r12, r12, (MAS3_SX | MAS3_SR)
-
+	slwi	r10, r12, 1
+	or	r10, r10, r12
+	iseleq	r12, r12, r10
+	
 #ifdef CONFIG_PTE_64BIT
 2:	rlwimi	r12, r13, 24, 0, 7	/* grab RPN[32:39] */
 	rlwimi	r12, r11, 24, 8, 19	/* grab RPN[40:51] */
@@ -1065,6 +981,52 @@ _GLOBAL(set_context)
 	isync			/* Force context change */
 	blr
 
+_GLOBAL(flush_dcache_L1)
+	mfspr	r3,SPRN_L1CFG0
+
+	rlwinm	r5,r3,9,3	/* Extract cache block size */
+	twlgti	r5,1		/* Only 32 and 64 byte cache blocks
+				 * are currently defined.
+				 */
+	li	r4,32
+	subfic	r6,r5,2		/* r6 = log2(1KiB / cache block size) -
+				 *      log2(number of ways)
+				 */
+	slw	r5,r4,r5	/* r5 = cache block size */
+
+	rlwinm	r7,r3,0,0xff	/* Extract number of KiB in the cache */
+	mulli	r7,r7,13	/* An 8-way cache will require 13
+				 * loads per set.
+				 */
+	slw	r7,r7,r6
+
+	/* save off HID0 and set DCFA */
+	mfspr	r8,SPRN_HID0
+	ori	r9,r8,HID0_DCFA@l
+	mtspr	SPRN_HID0,r9
+	isync
+
+	lis	r4,KERNELBASE@h
+	mtctr	r7
+
+1:	lwz	r3,0(r4)	/* Load... */
+	add	r4,r4,r5
+	bdnz	1b
+
+	msync
+	lis	r4,KERNELBASE@h
+	mtctr	r7
+
+1:	dcbf	0,r4		/* ...and flush. */
+	add	r4,r4,r5
+	bdnz	1b
+	
+	/* restore HID0 */
+	mtspr	SPRN_HID0,r8
+	isync
+
+	blr
+
 /*
  * We put a few things here that have to be page-aligned. This stuff
  * goes at the beginning of the data segment, which is page-aligned.
@@ -1080,15 +1042,6 @@ empty_zero_page:
 swapper_pg_dir:
 	.space	PGD_TABLE_SIZE
 
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-	.align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
-	.globl	exception_stack_top
-exception_stack_top:
-
 /*
  * Room for two PTE pointers, usually the kernel and current user pointers
  * to their respective root page table.
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 9971159c8040..9d42eb57aea3 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -53,7 +53,7 @@ static struct device ibmebus_bus_device = { /* fake "parent" device */
 struct bus_type ibmebus_bus_type;
 
 /* These devices will automatically be added to the bus during init */
-static struct of_device_id __initdata builtin_matches[] = {
+static struct of_device_id __initdata ibmebus_matches[] = {
 	{ .compatible = "IBM,lhca" },
 	{ .compatible = "IBM,lhea" },
 	{},
@@ -82,7 +82,8 @@ static void ibmebus_free_coherent(struct device *dev,
 static dma_addr_t ibmebus_map_single(struct device *dev,
 				     void *ptr,
 				     size_t size,
-				     enum dma_data_direction direction)
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs)
 {
 	return (dma_addr_t)(ptr);
 }
@@ -90,14 +91,16 @@ static dma_addr_t ibmebus_map_single(struct device *dev,
 static void ibmebus_unmap_single(struct device *dev,
 				 dma_addr_t dma_addr,
 				 size_t size,
-				 enum dma_data_direction direction)
+				 enum dma_data_direction direction,
+				 struct dma_attrs *attrs)
 {
 	return;
 }
 
 static int ibmebus_map_sg(struct device *dev,
 			  struct scatterlist *sgl,
-			  int nents, enum dma_data_direction direction)
+			  int nents, enum dma_data_direction direction,
+			  struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int i;
@@ -112,7 +115,8 @@ static int ibmebus_map_sg(struct device *dev,
 
 static void ibmebus_unmap_sg(struct device *dev,
 			     struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
 {
 	return;
 }
@@ -350,7 +354,7 @@ static int __init ibmebus_bus_init(void)
 		return err;
 	}
 
-	err = ibmebus_create_devices(builtin_matches);
+	err = ibmebus_create_devices(ibmebus_matches);
 	if (err) {
 		device_unregister(&ibmebus_bus_device);
 		bus_unregister(&ibmebus_bus_type);
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index c3cf0e8f3ac1..d308a9f70f1b 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -60,7 +60,7 @@ void cpu_idle(void)
 
 	set_thread_flag(TIF_POLLING_NRFLAG);
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched() && !cpu_should_die()) {
 			ppc64_runlatch_off();
 
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 01bcd52bbf8e..019b02d8844f 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -153,7 +153,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
  * address of current.  R11 points to the exception frame (physical
  * address).  We have to preserve r10.
  */
-_GLOBAL(power_save_6xx_restore)
+_GLOBAL(power_save_ppc32_restore)
 	lwz	r9,_LINK(r11)		/* interrupted in ppc6xx_idle: */
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
new file mode 100644
index 000000000000..06304034b393
--- /dev/null
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ * Dave Liu <daveliu@freescale.com>
+ * copy from idle_6xx.S and modify for e500 based processor,
+ * implement the power_save function in idle.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+	.text
+
+_GLOBAL(e500_idle)
+	rlwinm	r3,r1,0,0,31-THREAD_SHIFT	/* current thread_info */
+	lwz	r4,TI_LOCAL_FLAGS(r3)	/* set napping bit */
+	ori	r4,r4,_TLF_NAPPING	/* so when we take an exception */
+	stw	r4,TI_LOCAL_FLAGS(r3)	/* it will return to our caller */
+
+	/* Check if we can nap or doze, put HID0 mask in r3 */
+	lis	r3,0
+BEGIN_FTR_SECTION
+	lis	r3,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+
+BEGIN_FTR_SECTION
+	/* Now check if user enabled NAP mode */
+	lis	r4,powersave_nap@ha
+	lwz	r4,powersave_nap@l(r4)
+	cmpwi	0,r4,0
+	beq	1f
+	stwu	r1,-16(r1)
+	mflr	r0
+	stw	r0,20(r1)
+	bl	flush_dcache_L1
+	lwz	r0,20(r1)
+	addi	r1,r1,16
+	mtlr	r0
+	lis	r3,HID0_NAP@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+BEGIN_FTR_SECTION
+	msync
+	li	r7,L2CSR0_L2FL@l
+	mtspr	SPRN_L2CSR0,r7
+2:
+	mfspr	r7,SPRN_L2CSR0
+	andi.	r4,r7,L2CSR0_L2FL@l
+	bne	2b
+END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP)
+1:
+	/* Go to NAP or DOZE now */
+	mfspr	r4,SPRN_HID0
+	rlwinm	r4,r4,0,~(HID0_DOZE|HID0_NAP|HID0_SLEEP)
+	or	r4,r4,r3
+	isync
+	mtspr	SPRN_HID0,r4
+	isync
+
+	mfmsr	r7
+	oris	r7,r7,MSR_WE@h
+	ori	r7,r7,MSR_EE
+	msync
+	mtmsr	r7
+	isync
+2:	b	2b
+
+/*
+ * Return from NAP/DOZE mode, restore some CPU specific registers,
+ * r2 containing physical address of current.
+ * r11 points to the exception frame (physical address).
+ * We have to preserve r10.
+ */
+_GLOBAL(power_save_ppc32_restore)
+	lwz	r9,_LINK(r11)		/* interrupted in e500_idle */
+	stw	r9,_NIP(r11)		/* make it do a blr */
+
+#ifdef CONFIG_SMP
+	mfspr	r12,SPRN_SPRG3
+	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
+	slwi	r11,r11,2
+#else
+	li	r11,0
+#endif
+	b	transfer_to_handler_cont
diff --git a/arch/powerpc/kernel/io.c b/arch/powerpc/kernel/io.c
index e31aca9208eb..1882bf419fa6 100644
--- a/arch/powerpc/kernel/io.c
+++ b/arch/powerpc/kernel/io.c
@@ -120,7 +120,8 @@ EXPORT_SYMBOL(_outsl_ns);
 
 #define IO_CHECK_ALIGN(v,a) ((((unsigned long)(v)) & ((a) - 1)) == 0)
 
-void _memset_io(volatile void __iomem *addr, int c, unsigned long n)
+notrace void
+_memset_io(volatile void __iomem *addr, int c, unsigned long n)
 {
 	void *p = (void __force *)addr;
 	u32 lc = c;
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 0c663669bc32..550a19399bfa 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -49,6 +49,8 @@ static int novmerge = 1;
 
 static int protect4gb = 1;
 
+static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
+
 static inline unsigned long iommu_num_pages(unsigned long vaddr,
 					    unsigned long slen)
 {
@@ -186,10 +188,12 @@ static unsigned long iommu_range_alloc(struct device *dev,
 static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 			      void *page, unsigned int npages,
 			      enum dma_data_direction direction,
-			      unsigned long mask, unsigned int align_order)
+			      unsigned long mask, unsigned int align_order,
+			      struct dma_attrs *attrs)
 {
 	unsigned long entry, flags;
 	dma_addr_t ret = DMA_ERROR_CODE;
+	int build_fail;
 
 	spin_lock_irqsave(&(tbl->it_lock), flags);
 
@@ -204,9 +208,21 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 	ret = entry << IOMMU_PAGE_SHIFT;	/* Set the return dma address */
 
 	/* Put the TCEs in the HW table */
-	ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & IOMMU_PAGE_MASK,
-			 direction);
+	build_fail = ppc_md.tce_build(tbl, entry, npages,
+	                              (unsigned long)page & IOMMU_PAGE_MASK,
+	                              direction, attrs);
+
+	/* ppc_md.tce_build() only returns non-zero for transient errors.
+	 * Clean up the table bitmap in this case and return
+	 * DMA_ERROR_CODE. For all other errors the functionality is
+	 * not altered.
+	 */
+	if (unlikely(build_fail)) {
+		__iommu_free(tbl, ret, npages);
 
+		spin_unlock_irqrestore(&(tbl->it_lock), flags);
+		return DMA_ERROR_CODE;
+	}
 
 	/* Flush/invalidate TLB caches if necessary */
 	if (ppc_md.tce_flush)
@@ -267,15 +283,15 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	spin_unlock_irqrestore(&(tbl->it_lock), flags);
 }
 
-int iommu_map_sg(struct device *dev, struct scatterlist *sglist,
-		 int nelems, unsigned long mask,
-		 enum dma_data_direction direction)
+int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+		 struct scatterlist *sglist, int nelems,
+		 unsigned long mask, enum dma_data_direction direction,
+		 struct dma_attrs *attrs)
 {
-	struct iommu_table *tbl = dev->archdata.dma_data;
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned long flags;
 	struct scatterlist *s, *outs, *segstart;
-	int outcount, incount, i;
+	int outcount, incount, i, build_fail = 0;
 	unsigned int align;
 	unsigned long handle;
 	unsigned int max_seg_size;
@@ -336,7 +352,11 @@ int iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 			    npages, entry, dma_addr);
 
 		/* Insert into HW table */
-		ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK, direction);
+		build_fail = ppc_md.tce_build(tbl, entry, npages,
+		                              vaddr & IOMMU_PAGE_MASK,
+		                              direction, attrs);
+		if(unlikely(build_fail))
+			goto failure;
 
 		/* If we are in an open segment, try merging */
 		if (segstart != s) {
@@ -412,7 +432,8 @@ int iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 
 
 void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
-		int nelems, enum dma_data_direction direction)
+		int nelems, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	unsigned long flags;
@@ -554,7 +575,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
  */
 dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 			    void *vaddr, size_t size, unsigned long mask,
-			    enum dma_data_direction direction)
+		enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	dma_addr_t dma_handle = DMA_ERROR_CODE;
 	unsigned long uaddr;
@@ -572,7 +593,8 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 			align = PAGE_SHIFT - IOMMU_PAGE_SHIFT;
 
 		dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction,
-					 mask >> IOMMU_PAGE_SHIFT, align);
+					 mask >> IOMMU_PAGE_SHIFT, align,
+					 attrs);
 		if (dma_handle == DMA_ERROR_CODE) {
 			if (printk_ratelimit())  {
 				printk(KERN_INFO "iommu_alloc failed, "
@@ -587,7 +609,8 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 }
 
 void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
-		size_t size, enum dma_data_direction direction)
+		size_t size, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	unsigned int npages;
 
@@ -640,7 +663,7 @@ void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
 	nio_pages = size >> IOMMU_PAGE_SHIFT;
 	io_order = get_iommu_order(size);
 	mapping = iommu_alloc(dev, tbl, ret, nio_pages, DMA_BIDIRECTIONAL,
-			      mask >> IOMMU_PAGE_SHIFT, io_order);
+			      mask >> IOMMU_PAGE_SHIFT, io_order, NULL);
 	if (mapping == DMA_ERROR_CODE) {
 		free_pages((unsigned long)ret, order);
 		return NULL;
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index bcc249d90c4d..6ac8612da3c3 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -98,7 +98,7 @@ EXPORT_SYMBOL(irq_desc);
 
 int distribute_irqs = 1;
 
-static inline unsigned long get_hard_enabled(void)
+static inline notrace unsigned long get_hard_enabled(void)
 {
 	unsigned long enabled;
 
@@ -108,13 +108,13 @@ static inline unsigned long get_hard_enabled(void)
 	return enabled;
 }
 
-static inline void set_soft_enabled(unsigned long enable)
+static inline notrace void set_soft_enabled(unsigned long enable)
 {
 	__asm__ __volatile__("stb %0,%1(13)"
 	: : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled)));
 }
 
-void raw_local_irq_restore(unsigned long en)
+notrace void raw_local_irq_restore(unsigned long en)
 {
 	/*
 	 * get_paca()->soft_enabled = en;
@@ -356,9 +356,42 @@ void __init init_IRQ(void)
 {
 	if (ppc_md.init_IRQ)
 		ppc_md.init_IRQ();
+
+	exc_lvl_ctx_init();
+
 	irq_ctx_init();
 }
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+struct thread_info   *critirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info    *dbgirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly;
+
+void exc_lvl_ctx_init(void)
+{
+	struct thread_info *tp;
+	int i;
+
+	for_each_possible_cpu(i) {
+		memset((void *)critirq_ctx[i], 0, THREAD_SIZE);
+		tp = critirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = 0;
+
+#ifdef CONFIG_BOOKE
+		memset((void *)dbgirq_ctx[i], 0, THREAD_SIZE);
+		tp = dbgirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = 0;
+
+		memset((void *)mcheckirq_ctx[i], 0, THREAD_SIZE);
+		tp = mcheckirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = HARDIRQ_OFFSET;
+#endif
+	}
+}
+#endif
 
 #ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
@@ -465,7 +498,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	host->revmap_type = revmap_type;
 	host->inval_irq = inval_irq;
 	host->ops = ops;
-	host->of_node = of_node;
+	host->of_node = of_node_get(of_node);
 
 	if (host->ops->match == NULL)
 		host->ops->match = default_irq_host_match;
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
new file mode 100644
index 000000000000..b4fdf2f2743c
--- /dev/null
+++ b/arch/powerpc/kernel/kgdb.c
@@ -0,0 +1,410 @@
+/*
+ * PowerPC backend to the KGDB stub.
+ *
+ * 1998 (c) Michael AK Tesch (tesch@cs.wisc.edu)
+ * Copyright (C) 2003 Timesys Corporation.
+ * Copyright (C) 2004-2006 MontaVista Software, Inc.
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC32 support restored by Vitaly Wool <vwool@ru.mvista.com> and
+ * Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ * Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program as licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/smp.h>
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+
+/*
+ * This table contains the mapping between PowerPC hardware trap types, and
+ * signals, which are primarily what GDB understands.  GDB and the kernel
+ * don't always agree on values, so we use constants taken from gdb-6.2.
+ */
+static struct hard_trap_info
+{
+	unsigned int tt;		/* Trap type code for powerpc */
+	unsigned char signo;		/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 0x0100, 0x02 /* SIGINT */  },		/* system reset */
+	{ 0x0200, 0x0b /* SIGSEGV */ },		/* machine check */
+	{ 0x0300, 0x0b /* SIGSEGV */ },		/* data access */
+	{ 0x0400, 0x0b /* SIGSEGV */ },		/* instruction access */
+	{ 0x0500, 0x02 /* SIGINT */  },		/* external interrupt */
+	{ 0x0600, 0x0a /* SIGBUS */  },		/* alignment */
+	{ 0x0700, 0x05 /* SIGTRAP */ },		/* program check */
+	{ 0x0800, 0x08 /* SIGFPE */  },		/* fp unavailable */
+	{ 0x0900, 0x0e /* SIGALRM */ },		/* decrementer */
+	{ 0x0c00, 0x14 /* SIGCHLD */ },		/* system call */
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+	{ 0x2002, 0x05 /* SIGTRAP */ },		/* debug */
+#if defined(CONFIG_FSL_BOOKE)
+	{ 0x2010, 0x08 /* SIGFPE */  },		/* spe unavailable */
+	{ 0x2020, 0x08 /* SIGFPE */  },		/* spe unavailable */
+	{ 0x2030, 0x08 /* SIGFPE */  },		/* spe fp data */
+	{ 0x2040, 0x08 /* SIGFPE */  },		/* spe fp data */
+	{ 0x2050, 0x08 /* SIGFPE */  },		/* spe fp round */
+	{ 0x2060, 0x0e /* SIGILL */  },		/* performace monitor */
+	{ 0x2900, 0x08 /* SIGFPE */  },		/* apu unavailable */
+	{ 0x3100, 0x0e /* SIGALRM */ },		/* fixed interval timer */
+	{ 0x3200, 0x02 /* SIGINT */  }, 	/* watchdog */
+#else /* ! CONFIG_FSL_BOOKE */
+	{ 0x1000, 0x0e /* SIGALRM */ },		/* prog interval timer */
+	{ 0x1010, 0x0e /* SIGALRM */ },		/* fixed interval timer */
+	{ 0x1020, 0x02 /* SIGINT */  }, 	/* watchdog */
+	{ 0x2010, 0x08 /* SIGFPE */  },		/* fp unavailable */
+	{ 0x2020, 0x08 /* SIGFPE */  },		/* ap unavailable */
+#endif
+#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */
+	{ 0x0d00, 0x05 /* SIGTRAP */ },		/* single-step */
+#if defined(CONFIG_8xx)
+	{ 0x1000, 0x04 /* SIGILL */  },		/* software emulation */
+#else /* ! CONFIG_8xx */
+	{ 0x0f00, 0x04 /* SIGILL */  },		/* performance monitor */
+	{ 0x0f20, 0x08 /* SIGFPE */  },		/* altivec unavailable */
+	{ 0x1300, 0x05 /* SIGTRAP */ }, 	/* instruction address break */
+#if defined(CONFIG_PPC64)
+	{ 0x1200, 0x05 /* SIGILL */  },		/* system error */
+	{ 0x1500, 0x04 /* SIGILL */  },		/* soft patch */
+	{ 0x1600, 0x04 /* SIGILL */  },		/* maintenance */
+	{ 0x1700, 0x08 /* SIGFPE */  },		/* altivec assist */
+	{ 0x1800, 0x04 /* SIGILL */  },		/* thermal */
+#else /* ! CONFIG_PPC64 */
+	{ 0x1400, 0x02 /* SIGINT */  },		/* SMI */
+	{ 0x1600, 0x08 /* SIGFPE */  },		/* altivec assist */
+	{ 0x1700, 0x04 /* SIGILL */  },		/* TAU */
+	{ 0x2000, 0x05 /* SIGTRAP */ },		/* run mode */
+#endif
+#endif
+#endif
+	{ 0x0000, 0x00 }			/* Must be last */
+};
+
+static int computeSignal(unsigned int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+static int kgdb_call_nmi_hook(struct pt_regs *regs)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), regs);
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	smp_send_debugger_break(MSG_ALL_BUT_SELF);
+}
+#endif
+
+/* KGDB functions to use existing PowerPC64 hooks. */
+static int kgdb_debugger(struct pt_regs *regs)
+{
+	return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
+}
+
+static int kgdb_handle_breakpoint(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
+		return 0;
+
+	if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
+		regs->nip += 4;
+
+	return 1;
+}
+
+static int kgdb_singlestep(struct pt_regs *regs)
+{
+	struct thread_info *thread_info, *exception_thread_info;
+
+	if (user_mode(regs))
+		return 0;
+
+	/*
+	 * On Book E and perhaps other processsors, singlestep is handled on
+	 * the critical exception stack.  This causes current_thread_info()
+	 * to fail, since it it locates the thread_info by masking off
+	 * the low bits of the current stack pointer.  We work around
+	 * this issue by copying the thread_info from the kernel stack
+	 * before calling kgdb_handle_exception, and copying it back
+	 * afterwards.  On most processors the copy is avoided since
+	 * exception_thread_info == thread_info.
+	 */
+	thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
+	exception_thread_info = current_thread_info();
+
+	if (thread_info != exception_thread_info)
+		memcpy(exception_thread_info, thread_info, sizeof *thread_info);
+
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
+
+	if (thread_info != exception_thread_info)
+		memcpy(thread_info, exception_thread_info, sizeof *thread_info);
+
+	return 1;
+}
+
+static int kgdb_iabr_match(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+		return 0;
+	return 1;
+}
+
+static int kgdb_dabr_match(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+		return 0;
+	return 1;
+}
+
+#define PACK64(ptr, src) do { *(ptr++) = (src); } while (0)
+
+#define PACK32(ptr, src) do {          \
+	u32 *ptr32;                   \
+	ptr32 = (u32 *)ptr;           \
+	*(ptr32++) = (src);           \
+	ptr = (unsigned long *)ptr32; \
+	} while (0)
+
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned long *ptr = gdb_regs;
+	int reg;
+
+	memset(gdb_regs, 0, NUMREGBYTES);
+
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, current->thread.evr[reg]);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(long);
+#endif
+
+	PACK64(ptr, regs->nip);
+	PACK64(ptr, regs->msr);
+	PACK32(ptr, regs->ccr);
+	PACK64(ptr, regs->link);
+	PACK64(ptr, regs->ctr);
+	PACK32(ptr, regs->xer);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	struct pt_regs *regs = (struct pt_regs *)(p->thread.ksp +
+						  STACK_FRAME_OVERHEAD);
+	unsigned long *ptr = gdb_regs;
+	int reg;
+
+	memset(gdb_regs, 0, NUMREGBYTES);
+
+	/* Regs GPR0-2 */
+	for (reg = 0; reg < 3; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+	/* Regs GPR3-13 are caller saved, not in regs->gpr[] */
+	ptr += 11;
+
+	/* Regs GPR14-31 */
+	for (reg = 14; reg < 32; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, p->thread.evr[reg]);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(long);
+#endif
+
+	PACK64(ptr, regs->nip);
+	PACK64(ptr, regs->msr);
+	PACK32(ptr, regs->ccr);
+	PACK64(ptr, regs->link);
+	PACK64(ptr, regs->ctr);
+	PACK32(ptr, regs->xer);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+#define UNPACK64(dest, ptr) do { dest = *(ptr++); } while (0)
+
+#define UNPACK32(dest, ptr) do {       \
+	u32 *ptr32;                   \
+	ptr32 = (u32 *)ptr;           \
+	dest = *(ptr32++);            \
+	ptr = (unsigned long *)ptr32; \
+	} while (0)
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned long *ptr = gdb_regs;
+	int reg;
+#ifdef CONFIG_SPE
+	union {
+		u32 v32[2];
+		u64 v64;
+	} acc;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		UNPACK64(regs->gpr[reg], ptr);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		UNPACK64(current->thread.evr[reg], ptr);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(int);
+#endif
+
+	UNPACK64(regs->nip, ptr);
+	UNPACK64(regs->msr, ptr);
+	UNPACK32(regs->ccr, ptr);
+	UNPACK64(regs->link, ptr);
+	UNPACK64(regs->ctr, ptr);
+	UNPACK32(regs->xer, ptr);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+/*
+ * This function does PowerPC specific procesing for interfacing to gdb.
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *linux_regs)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long addr;
+
+	switch (remcom_in_buffer[0]) {
+		/*
+		 * sAA..AA   Step one instruction from AA..AA
+		 * This will return an error to gdb ..
+		 */
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->nip = addr;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		/* set the trace bit if we're stepping */
+		if (remcom_in_buffer[0] == 's') {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+			mtspr(SPRN_DBCR0,
+			      mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+			linux_regs->msr |= MSR_DE;
+#else
+			linux_regs->msr |= MSR_SE;
+#endif
+			kgdb_single_step = 1;
+			if (kgdb_contthread)
+				atomic_set(&kgdb_cpu_doing_single_step,
+					   raw_smp_processor_id());
+		}
+		return 0;
+	}
+
+	return -1;
+}
+
+/*
+ * Global data
+ */
+struct kgdb_arch arch_kgdb_ops = {
+	.gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08},
+};
+
+static int kgdb_not_implemented(struct pt_regs *regs)
+{
+	return 0;
+}
+
+static void *old__debugger_ipi;
+static void *old__debugger;
+static void *old__debugger_bpt;
+static void *old__debugger_sstep;
+static void *old__debugger_iabr_match;
+static void *old__debugger_dabr_match;
+static void *old__debugger_fault_handler;
+
+int kgdb_arch_init(void)
+{
+	old__debugger_ipi = __debugger_ipi;
+	old__debugger = __debugger;
+	old__debugger_bpt = __debugger_bpt;
+	old__debugger_sstep = __debugger_sstep;
+	old__debugger_iabr_match = __debugger_iabr_match;
+	old__debugger_dabr_match = __debugger_dabr_match;
+	old__debugger_fault_handler = __debugger_fault_handler;
+
+	__debugger_ipi = kgdb_call_nmi_hook;
+	__debugger = kgdb_debugger;
+	__debugger_bpt = kgdb_handle_breakpoint;
+	__debugger_sstep = kgdb_singlestep;
+	__debugger_iabr_match = kgdb_iabr_match;
+	__debugger_dabr_match = kgdb_dabr_match;
+	__debugger_fault_handler = kgdb_not_implemented;
+
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+	__debugger_ipi = old__debugger_ipi;
+	__debugger = old__debugger;
+	__debugger_bpt = old__debugger_bpt;
+	__debugger_sstep = old__debugger_sstep;
+	__debugger_iabr_match = old__debugger_iabr_match;
+	__debugger_dabr_match = old__debugger_dabr_match;
+	__debugger_fault_handler = old__debugger_fault_handler;
+}
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index c176c513566b..de79915452c8 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -34,6 +34,13 @@
 #include <asm/cacheflush.h>
 #include <asm/sstep.h>
 #include <asm/uaccess.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_BOOKE
+#define MSR_SINGLESTEP	(MSR_DE)
+#else
+#define MSR_SINGLESTEP	(MSR_SE)
+#endif
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
@@ -53,7 +60,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 		ret = -EINVAL;
 	}
 
-	/* insn must be on a special executable page on ppc64 */
+	/* insn must be on a special executable page on ppc64.  This is
+	 * not explicitly required on ppc32 (right now), but it doesn't hurt */
 	if (!ret) {
 		p->ainsn.insn = get_insn_slot();
 		if (!p->ainsn.insn)
@@ -95,7 +103,16 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 
 static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
-	regs->msr |= MSR_SE;
+	/* We turn off async exceptions to ensure that the single step will
+	 * be for the instruction we have the kprobe on, if we dont its
+	 * possible we'd get the single step reported for an exception handler
+	 * like Decrementer or External Interrupt */
+	regs->msr &= ~MSR_EE;
+	regs->msr |= MSR_SINGLESTEP;
+#ifdef CONFIG_BOOKE
+	regs->msr &= ~MSR_CE;
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+#endif
 
 	/*
 	 * On powerpc we should single step on the original
@@ -127,7 +144,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	kcb->kprobe_saved_msr = regs->msr;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -158,7 +174,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			kprobe_opcode_t insn = *p->ainsn.insn;
 			if (kcb->kprobe_status == KPROBE_HIT_SS &&
 					is_trap(insn)) {
-				regs->msr &= ~MSR_SE;
+				/* Turn off 'trace' bits */
+				regs->msr &= ~MSR_SINGLESTEP;
 				regs->msr |= kcb->kprobe_saved_msr;
 				goto no_kprobe;
 			}
@@ -294,8 +311,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -334,7 +350,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->nip = orig_ret_address;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
@@ -376,6 +392,10 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 	if (!cur)
 		return 0;
 
+	/* make sure we got here for instruction we have a kprobe on */
+	if (((unsigned long)cur->ainsn.insn + 4) != regs->nip)
+		return 0;
+
 	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
 		kcb->kprobe_status = KPROBE_HIT_SSDONE;
 		cur->post_handler(cur, regs, 0);
@@ -395,10 +415,10 @@ out:
 
 	/*
 	 * if somebody else is singlestepping across a probe point, msr
-	 * will have SE set, in which case, continue the remaining processing
+	 * will have DE/SE set, in which case, continue the remaining processing
 	 * of do_debug, as if this is not a probe hit.
 	 */
-	if (regs->msr & MSR_SE)
+	if (regs->msr & MSR_SINGLESTEP)
 		return 0;
 
 	return 1;
@@ -421,7 +441,7 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 		 * normal page fault.
 		 */
 		regs->nip = (unsigned long)cur->addr;
-		regs->msr &= ~MSR_SE;
+		regs->msr &= ~MSR_SINGLESTEP; /* Turn off 'trace' bits */
 		regs->msr |= kcb->kprobe_saved_msr;
 		if (kcb->kprobe_status == KPROBE_REENTER)
 			restore_previous_kprobe(kcb);
@@ -498,7 +518,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 #ifdef CONFIG_PPC64
 unsigned long arch_deref_entry_point(void *entry)
 {
-	return (unsigned long)(((func_descr_t *)entry)->entry);
+	return ((func_descr_t *)entry)->entry;
 }
 #endif
 
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 1e656b43ad7f..9f856a0c3e38 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -34,8 +34,9 @@
 #include <asm/time.h>
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
+#include <asm/vio.h>
 
-#define MODULE_VERS "1.7"
+#define MODULE_VERS "1.8"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -129,32 +130,46 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
-static void log_plpar_hcall_return(unsigned long rc, char *tag)
+/**
+ * h_get_mpp
+ * H_GET_MPP hcall returns info in 7 parms
+ */
+int h_get_mpp(struct hvcall_mpp_data *mpp_data)
 {
-	switch(rc) {
-	case 0:
-		return;
-	case H_HARDWARE:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Hardware fault\n", tag);
-		return;
-	case H_FUNCTION:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Function not allowed\n", tag);
-		return;
-	case H_AUTHORITY:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Not authorized to this function\n", tag);
-		return;
-	case H_PARAMETER:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Bad parameter(s)\n",tag);
-		return;
-	default:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Unexpected rc(0x%lx)\n", tag, rc);
-	}
+	int rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+	rc = plpar_hcall9(H_GET_MPP, retbuf);
+
+	mpp_data->entitled_mem = retbuf[0];
+	mpp_data->mapped_mem = retbuf[1];
+
+	mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	mpp_data->pool_num = retbuf[2] & 0xffff;
+
+	mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
+	mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
+	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
+
+	mpp_data->pool_size = retbuf[4];
+	mpp_data->loan_request = retbuf[5];
+	mpp_data->backing_mem = retbuf[6];
+
+	return rc;
 }
+EXPORT_SYMBOL(h_get_mpp);
+
+struct hvcall_ppp_data {
+	u64	entitlement;
+	u64	unallocated_entitlement;
+	u16	group_num;
+	u16	pool_num;
+	u8	capped;
+	u8	weight;
+	u8	unallocated_weight;
+	u16	active_procs_in_pool;
+	u16	active_system_procs;
+};
 
 /*
  * H_GET_PPP hcall returns info in 4 parms.
@@ -176,27 +191,30 @@ static void log_plpar_hcall_return(unsigned long rc, char *tag)
  *              XXXX - Active processors in Physical Processor Pool.
  *                  XXXX  - Processors active on platform.
  */
-static unsigned int h_get_ppp(unsigned long *entitled,
-			      unsigned long *unallocated,
-			      unsigned long *aggregation,
-			      unsigned long *resource)
+static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
 	rc = plpar_hcall(H_GET_PPP, retbuf);
 
-	*entitled = retbuf[0];
-	*unallocated = retbuf[1];
-	*aggregation = retbuf[2];
-	*resource = retbuf[3];
+	ppp_data->entitlement = retbuf[0];
+	ppp_data->unallocated_entitlement = retbuf[1];
+
+	ppp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	ppp_data->pool_num = retbuf[2] & 0xffff;
 
-	log_plpar_hcall_return(rc, "H_GET_PPP");
+	ppp_data->capped = (retbuf[3] >> 6 * 8) & 0x01;
+	ppp_data->weight = (retbuf[3] >> 5 * 8) & 0xff;
+	ppp_data->unallocated_weight = (retbuf[3] >> 4 * 8) & 0xff;
+	ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff;
+	ppp_data->active_system_procs = retbuf[3] & 0xffff;
 
 	return rc;
 }
 
-static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
+static unsigned h_pic(unsigned long *pool_idle_time,
+		      unsigned long *num_procs)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
@@ -206,8 +224,87 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
 	*pool_idle_time = retbuf[0];
 	*num_procs = retbuf[1];
 
-	if (rc != H_AUTHORITY)
-		log_plpar_hcall_return(rc, "H_PIC");
+	return rc;
+}
+
+/*
+ * parse_ppp_data
+ * Parse out the data returned from h_get_ppp and h_pic
+ */
+static void parse_ppp_data(struct seq_file *m)
+{
+	struct hvcall_ppp_data ppp_data;
+	int rc;
+
+	rc = h_get_ppp(&ppp_data);
+	if (rc)
+		return;
+
+	seq_printf(m, "partition_entitled_capacity=%ld\n",
+	           ppp_data.entitlement);
+	seq_printf(m, "group=%d\n", ppp_data.group_num);
+	seq_printf(m, "system_active_processors=%d\n",
+	           ppp_data.active_system_procs);
+
+	/* pool related entries are apropriate for shared configs */
+	if (lppaca[0].shared_proc) {
+		unsigned long pool_idle_time, pool_procs;
+
+		seq_printf(m, "pool=%d\n", ppp_data.pool_num);
+
+		/* report pool_capacity in percentage */
+		seq_printf(m, "pool_capacity=%d\n",
+			   ppp_data.active_procs_in_pool * 100);
+
+		h_pic(&pool_idle_time, &pool_procs);
+		seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
+		seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+	}
+
+	seq_printf(m, "unallocated_capacity_weight=%d\n",
+		   ppp_data.unallocated_weight);
+	seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
+	seq_printf(m, "capped=%d\n", ppp_data.capped);
+	seq_printf(m, "unallocated_capacity=%ld\n",
+		   ppp_data.unallocated_entitlement);
+}
+
+/**
+ * parse_mpp_data
+ * Parse out data returned from h_get_mpp
+ */
+static void parse_mpp_data(struct seq_file *m)
+{
+	struct hvcall_mpp_data mpp_data;
+	int rc;
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return;
+
+	seq_printf(m, "entitled_memory=%ld\n", mpp_data.entitled_mem);
+
+	if (mpp_data.mapped_mem != -1)
+		seq_printf(m, "mapped_entitled_memory=%ld\n",
+		           mpp_data.mapped_mem);
+
+	seq_printf(m, "entitled_memory_group_number=%d\n", mpp_data.group_num);
+	seq_printf(m, "entitled_memory_pool_number=%d\n", mpp_data.pool_num);
+
+	seq_printf(m, "entitled_memory_weight=%d\n", mpp_data.mem_weight);
+	seq_printf(m, "unallocated_entitled_memory_weight=%d\n",
+	           mpp_data.unallocated_mem_weight);
+	seq_printf(m, "unallocated_io_mapping_entitlement=%ld\n",
+	           mpp_data.unallocated_entitlement);
+
+	if (mpp_data.pool_size != -1)
+		seq_printf(m, "entitled_memory_pool_size=%ld bytes\n",
+		           mpp_data.pool_size);
+
+	seq_printf(m, "entitled_memory_loan_request=%ld\n",
+	           mpp_data.loan_request);
+
+	seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem);
 }
 
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
@@ -313,6 +410,25 @@ static int lparcfg_count_active_processors(void)
 	return count;
 }
 
+static void pseries_cmo_data(struct seq_file *m)
+{
+	int cpu;
+	unsigned long cmo_faults = 0;
+	unsigned long cmo_fault_time = 0;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	for_each_possible_cpu(cpu) {
+		cmo_faults += lppaca[cpu].cmo_faults;
+		cmo_fault_time += lppaca[cpu].cmo_fault_time;
+	}
+
+	seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
+	seq_printf(m, "cmo_fault_time_usec=%lu\n",
+		   cmo_fault_time / tb_ticks_per_usec);
+}
+
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
 {
 	int partition_potential_processors;
@@ -334,60 +450,13 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	partition_active_processors = lparcfg_count_active_processors();
 
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
-		unsigned long h_entitled, h_unallocated;
-		unsigned long h_aggregation, h_resource;
-		unsigned long pool_idle_time, pool_procs;
-		unsigned long purr;
-
-		h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
-			  &h_resource);
-
-		seq_printf(m, "R4=0x%lx\n", h_entitled);
-		seq_printf(m, "R5=0x%lx\n", h_unallocated);
-		seq_printf(m, "R6=0x%lx\n", h_aggregation);
-		seq_printf(m, "R7=0x%lx\n", h_resource);
-
-		purr = get_purr();
-
 		/* this call handles the ibm,get-system-parameter contents */
 		parse_system_parameter_string(m);
+		parse_ppp_data(m);
+		parse_mpp_data(m);
+		pseries_cmo_data(m);
 
-		seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
-
-		seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
-
-		seq_printf(m, "system_active_processors=%ld\n",
-			   (h_resource >> 0 * 8) & 0xffff);
-
-		/* pool related entries are apropriate for shared configs */
-		if (lppaca[0].shared_proc) {
-
-			h_pic(&pool_idle_time, &pool_procs);
-
-			seq_printf(m, "pool=%ld\n",
-				   (h_aggregation >> 0 * 8) & 0xffff);
-
-			/* report pool_capacity in percentage */
-			seq_printf(m, "pool_capacity=%ld\n",
-				   ((h_resource >> 2 * 8) & 0xffff) * 100);
-
-			seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
-
-			seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
-		}
-
-		seq_printf(m, "unallocated_capacity_weight=%ld\n",
-			   (h_resource >> 4 * 8) & 0xFF);
-
-		seq_printf(m, "capacity_weight=%ld\n",
-			   (h_resource >> 5 * 8) & 0xFF);
-
-		seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
-
-		seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
-
-		seq_printf(m, "purr=%ld\n", purr);
-
+		seq_printf(m, "purr=%ld\n", get_purr());
 	} else {		/* non SPLPAR case */
 
 		seq_printf(m, "system_active_processors=%d\n",
@@ -414,6 +483,83 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	return 0;
 }
 
+static ssize_t update_ppp(u64 *entitlement, u8 *weight)
+{
+	struct hvcall_ppp_data ppp_data;
+	u8 new_weight;
+	u64 new_entitled;
+	ssize_t retval;
+
+	/* Get our current parameters */
+	retval = h_get_ppp(&ppp_data);
+	if (retval)
+		return retval;
+
+	if (entitlement) {
+		new_weight = ppp_data.weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = ppp_data.entitlement;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	         __FUNCTION__, ppp_data.entitlement, ppp_data.weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+		 __FUNCTION__, new_entitled, new_weight);
+
+	retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
+	return retval;
+}
+
+/**
+ * update_mpp
+ *
+ * Update the memory entitlement and weight for the partition.  Caller must
+ * specify either a new entitlement or weight, not both, to be updated
+ * since the h_set_mpp call takes both entitlement and weight as parameters.
+ */
+static ssize_t update_mpp(u64 *entitlement, u8 *weight)
+{
+	struct hvcall_mpp_data mpp_data;
+	u64 new_entitled;
+	u8 new_weight;
+	ssize_t rc;
+
+	if (entitlement) {
+		/* Check with vio to ensure the new memory entitlement
+		 * can be handled.
+		 */
+		rc = vio_cmo_entitlement_update(*entitlement);
+		if (rc)
+			return rc;
+	}
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return rc;
+
+	if (entitlement) {
+		new_weight = mpp_data.mem_weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = mpp_data.entitled_mem;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	         __FUNCTION__, mpp_data.entitled_mem, mpp_data.mem_weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+	         __FUNCTION__, new_entitled, new_weight);
+
+	rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
+	return rc;
+}
+
 /*
  * Interface for changing system parameters (variable capacity weight
  * and entitled capacity).  Format of input is "param_name=value";
@@ -427,35 +573,27 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 			     size_t count, loff_t * off)
 {
-	char *kbuf;
+	int kbuf_sz = 64;
+	char kbuf[kbuf_sz];
 	char *tmp;
 	u64 new_entitled, *new_entitled_ptr = &new_entitled;
 	u8 new_weight, *new_weight_ptr = &new_weight;
-
-	unsigned long current_entitled;	/* parameters for h_get_ppp */
-	unsigned long dummy;
-	unsigned long resource;
-	u8 current_weight;
-
-	ssize_t retval = -ENOMEM;
+	ssize_t retval;
 
 	if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
 			firmware_has_feature(FW_FEATURE_ISERIES))
 		return -EINVAL;
 
-	kbuf = kmalloc(count, GFP_KERNEL);
-	if (!kbuf)
-		goto out;
+	if (count > kbuf_sz)
+		return -EINVAL;
 
-	retval = -EFAULT;
 	if (copy_from_user(kbuf, buf, count))
-		goto out;
+		return -EFAULT;
 
-	retval = -EINVAL;
 	kbuf[count - 1] = '\0';
 	tmp = strchr(kbuf, '=');
 	if (!tmp)
-		goto out;
+		return -EINVAL;
 
 	*tmp++ = '\0';
 
@@ -463,34 +601,32 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		char *endp;
 		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
-		new_weight_ptr = &current_weight;
+			return -EINVAL;
+
+		retval = update_ppp(new_entitled_ptr, NULL);
 	} else if (!strcmp(kbuf, "capacity_weight")) {
 		char *endp;
 		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
-		new_entitled_ptr = &current_entitled;
-	} else
-		goto out;
-
-	/* Get our current parameters */
-	retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
-	if (retval) {
-		retval = -EIO;
-		goto out;
-	}
-
-	current_weight = (resource >> 5 * 8) & 0xFF;
+			return -EINVAL;
 
-	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-		 __func__, current_entitled, current_weight);
+		retval = update_ppp(NULL, new_weight_ptr);
+	} else if (!strcmp(kbuf, "entitled_memory")) {
+		char *endp;
+		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			return -EINVAL;
 
-	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-		 __func__, *new_entitled_ptr, *new_weight_ptr);
+		retval = update_mpp(new_entitled_ptr, NULL);
+	} else if (!strcmp(kbuf, "entitled_memory_weight")) {
+		char *endp;
+		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			return -EINVAL;
 
-	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
-				    *new_weight_ptr);
+		retval = update_mpp(NULL, new_weight_ptr);
+	} else
+		return -EINVAL;
 
 	if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
 		retval = count;
@@ -506,8 +642,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		retval = -EIO;
 	}
 
-out:
-	kfree(kbuf);
 	return retval;
 }
 
@@ -573,7 +707,7 @@ static int lparcfg_open(struct inode *inode, struct file *file)
 	return single_open(file, lparcfg_data, NULL);
 }
 
-const struct file_operations lparcfg_fops = {
+static const struct file_operations lparcfg_fops = {
 	.owner		= THIS_MODULE,
 	.read		= seq_read,
 	.write		= lparcfg_write,
@@ -581,7 +715,7 @@ const struct file_operations lparcfg_fops = {
 	.release	= single_release,
 };
 
-int __init lparcfg_init(void)
+static int __init lparcfg_init(void)
 {
 	struct proc_dir_entry *ent;
 	mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
@@ -601,7 +735,7 @@ int __init lparcfg_init(void)
 	return 0;
 }
 
-void __exit lparcfg_cleanup(void)
+static void __exit lparcfg_cleanup(void)
 {
 	if (proc_ppc64_lparcfg)
 		remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 29a0e039d436..aab76887a842 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -48,7 +48,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	if (ppc_md.machine_kexec)
 		ppc_md.machine_kexec(image);
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 704375bda73a..a168514d8609 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -158,7 +158,7 @@ void kexec_copy_flush(struct kimage *image)
  * on calling the interrupts, but we would like to call it off irq level
  * so that the interrupt controller is clean.
  */
-void kexec_smp_down(void *arg)
+static void kexec_smp_down(void *arg)
 {
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0, 1);
@@ -172,7 +172,7 @@ static void kexec_prepare_cpus(void)
 {
 	int my_cpu, i, notified=-1;
 
-	smp_call_function(kexec_smp_down, NULL, 0, /* wait */0);
+	smp_call_function(kexec_smp_down, NULL, /* wait */0);
 	my_cpu = get_cpu();
 
 	/* check the others cpus are now down (via paca hw cpu id == -1) */
@@ -249,7 +249,7 @@ static void kexec_prepare_cpus(void)
  * We could use a smaller stack if we don't care about anything using
  * current, but that audit has not been performed.
  */
-union thread_union kexec_stack
+static union thread_union kexec_stack
 	__attribute__((__section__(".data.init_task"))) = { };
 
 /* Our assembly helper, in kexec_stub.S */
diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
index 7b9160220698..85cb6f340846 100644
--- a/arch/powerpc/kernel/misc.S
+++ b/arch/powerpc/kernel/misc.S
@@ -116,3 +116,8 @@ _GLOBAL(longjmp)
 	mtlr	r0
 	mr	r3,r4
 	blr
+
+_GLOBAL(__setup_cpu_power7)
+_GLOBAL(__restore_cpu_power7)
+	/* place holder */
+	blr
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 89aaaa6f3561..6321ae36f729 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -489,7 +489,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
  *
  * flush_icache_range(unsigned long start, unsigned long stop)
  */
-_GLOBAL(__flush_icache_range)
+_KPROBE(__flush_icache_range)
 BEGIN_FTR_SECTION
 	blr				/* for 601, do nothing */
 END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 942951e76586..4dd70cf7bb4e 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -506,6 +506,39 @@ _GLOBAL(giveup_altivec)
 
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_VSX
+/*
+ * __giveup_vsx(tsk)
+ * Disable VSX for the task given as the argument.
+ * Does NOT save vsx registers.
+ * Enables the VSX for use in the kernel on return.
+ */
+_GLOBAL(__giveup_vsx)
+	mfmsr	r5
+	oris	r5,r5,MSR_VSX@h
+	mtmsrd	r5			/* enable use of VSX now */
+	isync
+
+	cmpdi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	ld	r5,PT_REGS(r3)
+	cmpdi	0,r5,0
+	beq	1f
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_VSX@h
+	andc	r4,r4,r3		/* disable VSX for previous task */
+	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	ld	r4,last_task_used_vsx@got(r2)
+	std	r5,0(r4)
+#endif /* CONFIG_SMP */
+	blr
+
+#endif /* CONFIG_VSX */
+
 /* kexec_wait(phys_cpu)
  *
  * wait for the flag to change, indicating this kernel is going away but
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
new file mode 100644
index 000000000000..af07003573c4
--- /dev/null
+++ b/arch/powerpc/kernel/module.c
@@ -0,0 +1,116 @@
+/*  Kernel module help for powerpc.
+    Copyright (C) 2001, 2003 Rusty Russell IBM Corporation.
+    Copyright (C) 2008 Freescale Semiconductor, Inc.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+#include <linux/module.h>
+#include <linux/elf.h>
+#include <linux/moduleloader.h>
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/bug.h>
+#include <asm/module.h>
+#include <asm/uaccess.h>
+#include <asm/firmware.h>
+#include <linux/sort.h>
+
+#include "setup.h"
+
+LIST_HEAD(module_bug_list);
+
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+
+	return vmalloc_exec(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+	/* FIXME: If module_region == mod->init_region, trim exception
+           table entries. */
+}
+
+static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
+				    const Elf_Shdr *sechdrs,
+				    const char *name)
+{
+	char *secstrings;
+	unsigned int i;
+
+	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+	for (i = 1; i < hdr->e_shnum; i++)
+		if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
+			return &sechdrs[i];
+	return NULL;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+		const Elf_Shdr *sechdrs, struct module *me)
+{
+	const Elf_Shdr *sect;
+	int err;
+
+	err = module_bug_finalize(hdr, sechdrs, me);
+	if (err)
+		return err;
+
+	/* Apply feature fixups */
+	sect = find_section(hdr, sechdrs, "__ftr_fixup");
+	if (sect != NULL)
+		do_feature_fixups(cur_cpu_spec->cpu_features,
+				  (void *)sect->sh_addr,
+				  (void *)sect->sh_addr + sect->sh_size);
+
+#ifdef CONFIG_PPC64
+	sect = find_section(hdr, sechdrs, "__fw_ftr_fixup");
+	if (sect != NULL)
+		do_feature_fixups(powerpc_firmware_features,
+				  (void *)sect->sh_addr,
+				  (void *)sect->sh_addr + sect->sh_size);
+#endif
+
+	sect = find_section(hdr, sechdrs, "__lwsync_fixup");
+	if (sect != NULL)
+		do_lwsync_fixups(cur_cpu_spec->cpu_features,
+				 (void *)sect->sh_addr,
+				 (void *)sect->sh_addr + sect->sh_size);
+
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+	module_bug_cleanup(mod);
+}
+
+struct bug_entry *module_find_bug(unsigned long bugaddr)
+{
+	struct mod_arch_specific *mod;
+	unsigned int i;
+	struct bug_entry *bug;
+
+	list_for_each_entry(mod, &module_bug_list, bug_list) {
+		bug = mod->bug_table;
+		for (i = 0; i < mod->num_bugs; ++i, ++bug)
+			if (bugaddr == bug->bug_addr)
+				return bug;
+	}
+	return NULL;
+}
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index eab313858315..2df91a03462a 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -34,23 +34,6 @@
 #define DEBUGP(fmt , ...)
 #endif
 
-LIST_HEAD(module_bug_list);
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
 /* Count how many different relocations (different symbol, different
    addend) */
 static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
@@ -325,58 +308,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 	}
 	return 0;
 }
-
-static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
-				    const Elf_Shdr *sechdrs,
-				    const char *name)
-{
-	char *secstrings;
-	unsigned int i;
-
-	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	for (i = 1; i < hdr->e_shnum; i++)
-		if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
-			return &sechdrs[i];
-	return NULL;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *me)
-{
-	const Elf_Shdr *sect;
-	int err;
-
-	err = module_bug_finalize(hdr, sechdrs, me);
-	if (err)		/* never true, currently */
-		return err;
-
-	/* Apply feature fixups */
-	sect = find_section(hdr, sechdrs, "__ftr_fixup");
-	if (sect != NULL)
-		do_feature_fixups(cur_cpu_spec->cpu_features,
-				  (void *)sect->sh_addr,
-				  (void *)sect->sh_addr + sect->sh_size);
-
-	return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	module_bug_cleanup(mod);
-}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 3a82b02b784b..ee6a2982d567 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -24,6 +24,7 @@
 #include <asm/module.h>
 #include <asm/uaccess.h>
 #include <asm/firmware.h>
+#include <asm/code-patching.h>
 #include <linux/sort.h>
 
 #include "setup.h"
@@ -101,22 +102,6 @@ static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num)
 	return _count_relocs;
 }
 
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-
-	return vmalloc_exec(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
 static int relacmp(const void *_x, const void *_y)
 {
 	const Elf64_Rela *x, *y;
@@ -346,7 +331,7 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
    restore r2. */
 static int restore_r2(u32 *instruction, struct module *me)
 {
-	if (*instruction != 0x60000000) {
+	if (*instruction != PPC_NOP_INSTR) {
 		printk("%s: Expect noop after relocate, got %08x\n",
 		       me->name, *instruction);
 		return 0;
@@ -466,65 +451,3 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 
 	return 0;
 }
-
-LIST_HEAD(module_bug_list);
-
-static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
-				    const Elf_Shdr *sechdrs,
-				    const char *name)
-{
-	char *secstrings;
-	unsigned int i;
-
-	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	for (i = 1; i < hdr->e_shnum; i++)
-		if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
-			return &sechdrs[i];
-	return NULL;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		const Elf_Shdr *sechdrs, struct module *me)
-{
-	const Elf_Shdr *sect;
-	int err;
-
-	err = module_bug_finalize(hdr, sechdrs, me);
-	if (err)
-		return err;
-
-	/* Apply feature fixups */
-	sect = find_section(hdr, sechdrs, "__ftr_fixup");
-	if (sect != NULL)
-		do_feature_fixups(cur_cpu_spec->cpu_features,
-				  (void *)sect->sh_addr,
-				  (void *)sect->sh_addr + sect->sh_size);
-
-	sect = find_section(hdr, sechdrs, "__fw_ftr_fixup");
-	if (sect != NULL)
-		do_feature_fixups(powerpc_firmware_features,
-				  (void *)sect->sh_addr,
-				  (void *)sect->sh_addr + sect->sh_size);
-
-	return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	module_bug_cleanup(mod);
-}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index c62d1012c013..3bb7d3dd28be 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -34,5 +34,5 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 void arch_teardown_msi_irqs(struct pci_dev *dev)
 {
-	return ppc_md.teardown_msi_irqs(dev);
+	ppc_md.teardown_msi_irqs(dev);
 }
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index 5748ddb47d9f..e9be908f199b 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -89,54 +89,6 @@ struct of_device *of_device_alloc(struct device_node *np,
 }
 EXPORT_SYMBOL(of_device_alloc);
 
-ssize_t of_device_get_modalias(struct of_device *ofdev,
-				char *str, ssize_t len)
-{
-	const char *compat;
-	int cplen, i;
-	ssize_t tsize, csize, repend;
-
-	/* Name & Type */
-	csize = snprintf(str, len, "of:N%sT%s",
-				ofdev->node->name, ofdev->node->type);
-
-	/* Get compatible property if any */
-	compat = of_get_property(ofdev->node, "compatible", &cplen);
-	if (!compat)
-		return csize;
-
-	/* Find true end (we tolerate multiple \0 at the end */
-	for (i=(cplen-1); i>=0 && !compat[i]; i--)
-		cplen--;
-	if (!cplen)
-		return csize;
-	cplen++;
-
-	/* Check space (need cplen+1 chars including final \0) */
-	tsize = csize + cplen;
-	repend = tsize;
-
-	if (csize>=len)		/* @ the limit, all is already filled */
-		return tsize;
-
-	if (tsize>=len) {		/* limit compat list */
-		cplen = len-csize-1;
-		repend = len;
-	}
-
-	/* Copy and do char replacement */
-	memcpy(&str[csize+1], compat, cplen);
-	for (i=csize; i<repend; i++) {
-		char c = str[i];
-		if (c=='\0')
-			str[i] = 'C';
-		else if (c==' ')
-			str[i] = '_';
-	}
-
-	return tsize;
-}
-
 int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct of_device *ofdev;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 063cdd413049..224e9a11765c 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -598,6 +598,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			res->start = pci_addr;
 			break;
 		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
 			printk(KERN_INFO
 			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
 			       cpu_addr, cpu_addr + size - 1, pci_addr,
diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h
index 90e562771791..dc16aefe1dd0 100644
--- a/arch/powerpc/kernel/ppc32.h
+++ b/arch/powerpc/kernel/ppc32.h
@@ -120,6 +120,7 @@ struct mcontext32 {
 	elf_fpregset_t		mc_fregs;
 	unsigned int		mc_pad[2];
 	elf_vrregset_t32	mc_vregs __attribute__((__aligned__(16)));
+	elf_vsrreghalf_t32      mc_vsregs __attribute__((__aligned__(16)));
 };
 
 struct ucontext32 { 
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index d3ac631cbd26..e1ea4fe5cfbd 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -42,6 +42,7 @@
 #include <asm/div64.h>
 #include <asm/signal.h>
 #include <asm/dcr.h>
+#include <asm/ftrace.h>
 
 #ifdef CONFIG_PPC32
 extern void transfer_to_handler(void);
@@ -67,6 +68,10 @@ EXPORT_SYMBOL(single_step_exception);
 EXPORT_SYMBOL(sys_sigreturn);
 #endif
 
+#ifdef CONFIG_FTRACE
+EXPORT_SYMBOL(_mcount);
+#endif
+
 EXPORT_SYMBOL(strcpy);
 EXPORT_SYMBOL(strncpy);
 EXPORT_SYMBOL(strcat);
@@ -102,6 +107,9 @@ EXPORT_SYMBOL(giveup_fpu);
 #ifdef CONFIG_ALTIVEC
 EXPORT_SYMBOL(giveup_altivec);
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+EXPORT_SYMBOL(giveup_vsx);
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 EXPORT_SYMBOL(giveup_spe);
 #endif /* CONFIG_SPE */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7de41c3948ec..db2497ccc111 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -47,12 +47,15 @@
 #ifdef CONFIG_PPC64
 #include <asm/firmware.h>
 #endif
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
 
 extern unsigned long _get_SP(void);
 
 #ifndef CONFIG_SMP
 struct task_struct *last_task_used_math = NULL;
 struct task_struct *last_task_used_altivec = NULL;
+struct task_struct *last_task_used_vsx = NULL;
 struct task_struct *last_task_used_spe = NULL;
 #endif
 
@@ -104,17 +107,6 @@ void enable_kernel_fp(void)
 }
 EXPORT_SYMBOL(enable_kernel_fp);
 
-int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
-{
-	if (!tsk->thread.regs)
-		return 0;
-	flush_fp_to_thread(current);
-
-	memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs));
-
-	return 1;
-}
-
 #ifdef CONFIG_ALTIVEC
 void enable_kernel_altivec(void)
 {
@@ -148,36 +140,48 @@ void flush_altivec_to_thread(struct task_struct *tsk)
 		preempt_enable();
 	}
 }
+#endif /* CONFIG_ALTIVEC */
 
-int dump_task_altivec(struct task_struct *tsk, elf_vrregset_t *vrregs)
+#ifdef CONFIG_VSX
+#if 0
+/* not currently used, but some crazy RAID module might want to later */
+void enable_kernel_vsx(void)
 {
-	/* ELF_NVRREG includes the VSCR and VRSAVE which we need to save
-	 * separately, see below */
-	const int nregs = ELF_NVRREG - 2;
-	elf_vrreg_t *reg;
-	u32 *dest;
-
-	if (tsk == current)
-		flush_altivec_to_thread(tsk);
-
-	reg = (elf_vrreg_t *)vrregs;
-
-	/* copy the 32 vr registers */
-	memcpy(reg, &tsk->thread.vr[0], nregs * sizeof(*reg));
-	reg += nregs;
+	WARN_ON(preemptible());
 
-	/* copy the vscr */
-	memcpy(reg, &tsk->thread.vscr, sizeof(*reg));
-	reg++;
+#ifdef CONFIG_SMP
+	if (current->thread.regs && (current->thread.regs->msr & MSR_VSX))
+		giveup_vsx(current);
+	else
+		giveup_vsx(NULL);	/* just enable vsx for kernel - force */
+#else
+	giveup_vsx(last_task_used_vsx);
+#endif /* CONFIG_SMP */
+}
+EXPORT_SYMBOL(enable_kernel_vsx);
+#endif
 
-	/* vrsave is stored in the high 32bit slot of the final 128bits */
-	memset(reg, 0, sizeof(*reg));
-	dest = (u32 *)reg;
-	*dest = tsk->thread.vrsave;
+void giveup_vsx(struct task_struct *tsk)
+{
+	giveup_fpu(tsk);
+	giveup_altivec(tsk);
+	__giveup_vsx(tsk);
+}
 
-	return 1;
+void flush_vsx_to_thread(struct task_struct *tsk)
+{
+	if (tsk->thread.regs) {
+		preempt_disable();
+		if (tsk->thread.regs->msr & MSR_VSX) {
+#ifdef CONFIG_SMP
+			BUG_ON(tsk != current);
+#endif
+			giveup_vsx(tsk);
+		}
+		preempt_enable();
+	}
 }
-#endif /* CONFIG_ALTIVEC */
+#endif /* CONFIG_VSX */
 
 #ifdef CONFIG_SPE
 
@@ -209,14 +213,6 @@ void flush_spe_to_thread(struct task_struct *tsk)
 		preempt_enable();
 	}
 }
-
-int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
-{
-	flush_spe_to_thread(current);
-	/* We copy u32 evr[32] + u64 acc + u32 spefscr -> 35 */
-	memcpy(evrregs, &current->thread.evr[0], sizeof(u32) * 35);
-	return 1;
-}
 #endif /* CONFIG_SPE */
 
 #ifndef CONFIG_SMP
@@ -233,6 +229,10 @@ void discard_lazy_cpu_state(void)
 	if (last_task_used_altivec == current)
 		last_task_used_altivec = NULL;
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	if (last_task_used_vsx == current)
+		last_task_used_vsx = NULL;
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	if (last_task_used_spe == current)
 		last_task_used_spe = NULL;
@@ -241,6 +241,35 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code)
+{
+	siginfo_t info;
+
+	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+			11, SIGSEGV) == NOTIFY_STOP)
+		return;
+
+	if (debugger_dabr_match(regs))
+		return;
+
+	/* Clear the DAC and struct entries.  One shot trigger */
+#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE))
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
+							| DBCR0_IDM));
+#endif
+
+	/* Clear the DABR */
+	set_dabr(0);
+
+	/* Deliver the signal to userspace */
+	info.si_signo = SIGTRAP;
+	info.si_errno = 0;
+	info.si_code = TRAP_HWBKPT;
+	info.si_addr = (void __user *)address;
+	force_sig_info(SIGTRAP, &info, current);
+}
+
 static DEFINE_PER_CPU(unsigned long, current_dabr);
 
 int set_dabr(unsigned long dabr)
@@ -256,6 +285,11 @@ int set_dabr(unsigned long dabr)
 #if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
 	mtspr(SPRN_DABR, dabr);
 #endif
+
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+	mtspr(SPRN_DAC1, dabr);
+#endif
+
 	return 0;
 }
 
@@ -297,6 +331,11 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))
 		giveup_altivec(prev);
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VSX))
+		/* VMX and FPU registers are already save here */
+		__giveup_vsx(prev);
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/*
 	 * If the previous thread used spe in the last quantum
@@ -317,6 +356,10 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (new->thread.regs && last_task_used_altivec == new)
 		new->thread.regs->msr |= MSR_VEC;
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	if (new->thread.regs && last_task_used_vsx == new)
+		new->thread.regs->msr |= MSR_VSX;
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/* Avoid the trap.  On smp this this never happens since
 	 * we don't set last_task_used_spe
@@ -330,6 +373,12 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
 
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+	/* If new thread DAC (HW breakpoint) is the same then leave it */
+	if (new->thread.dabr)
+		set_dabr(new->thread.dabr);
+#endif
+
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
@@ -417,6 +466,8 @@ static struct regbit {
 	{MSR_EE,	"EE"},
 	{MSR_PR,	"PR"},
 	{MSR_FP,	"FP"},
+	{MSR_VEC,	"VEC"},
+	{MSR_VSX,	"VSX"},
 	{MSR_ME,	"ME"},
 	{MSR_IR,	"IR"},
 	{MSR_DR,	"DR"},
@@ -484,10 +535,8 @@ void show_regs(struct pt_regs * regs)
 	 * Lookup NIP late so we have the best change of getting the
 	 * above info out without failing
 	 */
-	printk("NIP ["REG"] ", regs->nip);
-	print_symbol("%s\n", regs->nip);
-	printk("LR ["REG"] ", regs->link);
-	print_symbol("%s\n", regs->link);
+	printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip);
+	printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link);
 #endif
 	show_stack(current, (unsigned long *) regs->gpr[1]);
 	if (!user_mode(regs))
@@ -518,6 +567,10 @@ void flush_thread(void)
 	if (current->thread.dabr) {
 		current->thread.dabr = 0;
 		set_dabr(0);
+
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
+#endif
 	}
 }
 
@@ -534,6 +587,7 @@ void prepare_to_copy(struct task_struct *tsk)
 {
 	flush_fp_to_thread(current);
 	flush_altivec_to_thread(current);
+	flush_vsx_to_thread(current);
 	flush_spe_to_thread(current);
 }
 
@@ -689,6 +743,9 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 #endif
 
 	discard_lazy_cpu_state();
+#ifdef CONFIG_VSX
+	current->thread.used_vsr = 0;
+#endif
 	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
 	current->thread.fpscr.val = 0;
 #ifdef CONFIG_ALTIVEC
@@ -971,8 +1028,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		newsp = stack[0];
 		ip = stack[STACK_FRAME_LR_SAVE];
 		if (!firstframe || ip != lr) {
-			printk("["REG"] ["REG"] ", sp, ip);
-			print_symbol("%s", ip);
+			printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
 			if (firstframe)
 				printk(" (unreliable)");
 			printk("\n");
@@ -987,10 +1043,9 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		    && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
 			struct pt_regs *regs = (struct pt_regs *)
 				(sp + STACK_FRAME_OVERHEAD);
-			printk("--- Exception: %lx", regs->trap);
-			print_symbol(" at %s\n", regs->nip);
 			lr = regs->link;
-			print_symbol("    LR = %s\n", lr);
+			printk("--- Exception: %lx at %pS\n    LR = %pS\n",
+			       regs->trap, (void *)regs->nip, (void *)lr);
 			firstframe = 1;
 		}
 
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 2aefe2a4129a..87d83c56b31e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -609,6 +609,10 @@ static struct feature_property {
 	{"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
 	{"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	/* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
+	{"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_PPC64
 	{"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
 	{"ibm,purr", 1, CPU_FTR_PURR, 0},
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 6d6df1e60325..c4ab2195b9cb 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -620,6 +620,7 @@ static void __init early_cmdline_parse(void)
 #define OV1_PPC_2_03		0x10	/* set if we support PowerPC 2.03 */
 #define OV1_PPC_2_04		0x08	/* set if we support PowerPC 2.04 */
 #define OV1_PPC_2_05		0x04	/* set if we support PowerPC 2.05 */
+#define OV1_PPC_2_06		0x02	/* set if we support PowerPC 2.06 */
 
 /* Option vector 2: Open Firmware options supported */
 #define OV2_REAL_MODE		0x20	/* set if we want OF in real mode */
@@ -642,6 +643,11 @@ static void __init early_cmdline_parse(void)
 #else
 #define OV5_MSI			0x00
 #endif /* CONFIG_PCI_MSI */
+#ifdef CONFIG_PPC_SMLPAR
+#define OV5_CMO			0x80	/* Cooperative Memory Overcommitment */
+#else
+#define OV5_CMO			0x00
+#endif
 
 /*
  * The architecture vector has an array of PVR mask/value pairs,
@@ -650,6 +656,8 @@ static void __init early_cmdline_parse(void)
 static unsigned char ibm_architecture_vec[] = {
 	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
+	W(0xffff0000), W(0x003f0000),	/* POWER7 */
+	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
 	W(0xfffffffe), W(0x0f000001),	/* all 2.04-compliant and earlier */
 	5 - 1,				/* 5 option vectors */
@@ -658,7 +666,7 @@ static unsigned char ibm_architecture_vec[] = {
 	3 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
-	OV1_PPC_2_04 | OV1_PPC_2_05,
+	OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06,
 
 	/* option vector 2: Open Firmware options supported */
 	34 - 2,				/* length */
@@ -684,10 +692,12 @@ static unsigned char ibm_architecture_vec[] = {
 	0,				/* don't halt */
 
 	/* option vector 5: PAPR/OF options */
-	3 - 2,				/* length */
+	5 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,
+	0,
+	OV5_CMO,
 };
 
 /* Old method - ELF header with PT_NOTE sections */
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 90eb3a3e383e..bc1fb27368af 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -128,12 +128,35 @@ static void of_bus_pci_count_cells(struct device_node *np,
 		*sizec = 2;
 }
 
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
+{
+	unsigned int flags = 0;
+	u32 w = addr[0];
+
+	switch((w >> 24) & 0x03) {
+	case 0x01:
+		flags |= IORESOURCE_IO;
+		break;
+	case 0x02: /* 32 bits */
+	case 0x03: /* 64 bits */
+		flags |= IORESOURCE_MEM;
+		break;
+	}
+	if (w & 0x40000000)
+		flags |= IORESOURCE_PREFETCH;
+	return flags;
+}
+
 static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 {
 	u64 cp, s, da;
+	unsigned int af, rf;
+
+	af = of_bus_pci_get_flags(addr);
+	rf = of_bus_pci_get_flags(range);
 
 	/* Check address type match */
-	if ((addr[0] ^ range[0]) & 0x03000000)
+	if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
 		return OF_BAD_ADDR;
 
 	/* Read address values, skipping high cell */
@@ -153,25 +176,6 @@ static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
 	return of_bus_default_translate(addr + 1, offset, na - 1);
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = addr[0];
-
-	switch((w >> 24) & 0x03) {
-	case 0x01:
-		flags |= IORESOURCE_IO;
-		break;
-	case 0x02: /* 32 bits */
-	case 0x03: /* 64 bits */
-		flags |= IORESOURCE_MEM;
-		break;
-	}
-	if (w & 0x40000000)
-		flags |= IORESOURCE_PREFETCH;
-	return flags;
-}
-
 const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
 			unsigned int *flags)
 {
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 2a9fe97e4521..a5d0e78779c8 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -215,29 +215,56 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
 		   void *kbuf, void __user *ubuf)
 {
+#ifdef CONFIG_VSX
+	double buf[33];
+	int i;
+#endif
 	flush_fp_to_thread(target);
 
+#ifdef CONFIG_VSX
+	/* copy to local buffer then write that out */
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.TS_FPR(i);
+	memcpy(&buf[32], &target->thread.fpscr, sizeof(double));
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+
+#else
 	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
-		     offsetof(struct thread_struct, fpr[32]));
+		     offsetof(struct thread_struct, TS_FPR(32)));
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fpr, 0, -1);
+#endif
 }
 
 static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
 		   const void *kbuf, const void __user *ubuf)
 {
+#ifdef CONFIG_VSX
+	double buf[33];
+	int i;
+#endif
 	flush_fp_to_thread(target);
 
+#ifdef CONFIG_VSX
+	/* copy to local buffer then write that out */
+	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+	if (i)
+		return i;
+	for (i = 0; i < 32 ; i++)
+		target->thread.TS_FPR(i) = buf[i];
+	memcpy(&target->thread.fpscr, &buf[32], sizeof(double));
+	return 0;
+#else
 	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
-		     offsetof(struct thread_struct, fpr[32]));
+		     offsetof(struct thread_struct, TS_FPR(32)));
 
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fpr, 0, -1);
+#endif
 }
 
-
 #ifdef CONFIG_ALTIVEC
 /*
  * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
@@ -323,6 +350,56 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
 }
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_VSX
+/*
+ * Currently to set and and get all the vsx state, you need to call
+ * the fp and VMX calls aswell.  This only get/sets the lower 32
+ * 128bit VSX registers.
+ */
+
+static int vsr_active(struct task_struct *target,
+		      const struct user_regset *regset)
+{
+	flush_vsx_to_thread(target);
+	return target->thread.used_vsr ? regset->n : 0;
+}
+
+static int vsr_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	double buf[32];
+	int ret, i;
+
+	flush_vsx_to_thread(target);
+
+	for (i = 0; i < 32 ; i++)
+		buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  buf, 0, 32 * sizeof(double));
+
+	return ret;
+}
+
+static int vsr_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	double buf[32];
+	int ret,i;
+
+	flush_vsx_to_thread(target);
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 buf, 0, 32 * sizeof(double));
+	for (i = 0; i < 32 ; i++)
+		current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+
+
+	return ret;
+}
+#endif /* CONFIG_VSX */
+
 #ifdef CONFIG_SPE
 
 /*
@@ -399,6 +476,9 @@ enum powerpc_regset {
 #ifdef CONFIG_ALTIVEC
 	REGSET_VMX,
 #endif
+#ifdef CONFIG_VSX
+	REGSET_VSX,
+#endif
 #ifdef CONFIG_SPE
 	REGSET_SPE,
 #endif
@@ -422,6 +502,13 @@ static const struct user_regset native_regsets[] = {
 		.active = vr_active, .get = vr_get, .set = vr_set
 	},
 #endif
+#ifdef CONFIG_VSX
+	[REGSET_VSX] = {
+		.core_note_type = NT_PPC_VSX, .n = 32,
+		.size = sizeof(double), .align = sizeof(double),
+		.active = vsr_active, .get = vsr_get, .set = vsr_set
+	},
+#endif
 #ifdef CONFIG_SPE
 	[REGSET_SPE] = {
 		.n = 35,
@@ -616,7 +703,7 @@ void user_enable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC;
+		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
 #else
 		regs->msr |= MSR_SE;
@@ -629,9 +716,16 @@ void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
 
+
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+	/* If DAC then do not single step, skip */
+	if (task->thread.dabr)
+		return;
+#endif
+
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = 0;
+		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
 		regs->msr &= ~MSR_DE;
 #else
 		regs->msr &= ~MSR_SE;
@@ -640,22 +734,75 @@ void user_disable_single_step(struct task_struct *task)
 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
-static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 			       unsigned long data)
 {
-	/* We only support one DABR and no IABRS at the moment */
+	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+	 *  For embedded processors we support one DAC and no IAC's at the
+	 *  moment.
+	 */
 	if (addr > 0)
 		return -EINVAL;
 
-	/* The bottom 3 bits are flags */
 	if ((data & ~0x7UL) >= TASK_SIZE)
 		return -EIO;
 
-	/* Ensure translation is on */
+#ifdef CONFIG_PPC64
+
+	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
+	 *  It was assumed, on previous implementations, that 3 bits were
+	 *  passed together with the data address, fitting the design of the
+	 *  DABR register, as follows:
+	 *
+	 *  bit 0: Read flag
+	 *  bit 1: Write flag
+	 *  bit 2: Breakpoint translation
+	 *
+	 *  Thus, we use them here as so.
+	 */
+
+	/* Ensure breakpoint translation bit is set */
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
 
+	/* Move contents to the DABR register */
 	task->thread.dabr = data;
+
+#endif
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+
+	/* As described above, it was assumed 3 bits were passed with the data
+	 *  address, but we will assume only the mode bits will be passed
+	 *  as to not cause alignment restrictions for DAC-based processors.
+	 */
+
+	/* DAC's hold the whole address without any mode flags */
+	task->thread.dabr = data & ~0x3UL;
+
+	if (task->thread.dabr == 0) {
+		task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM);
+		task->thread.regs->msr &= ~MSR_DE;
+		return 0;
+	}
+
+	/* Read or Write bits must be set */
+
+	if (!(data & 0x3UL))
+		return -EINVAL;
+
+	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
+	   register */
+	task->thread.dbcr0 = DBCR0_IDM;
+
+	/* Check for write and read flags and set DBCR0
+	   accordingly */
+	if (data & 0x1UL)
+		task->thread.dbcr0 |= DBSR_DAC1R;
+	if (data & 0x2UL)
+		task->thread.dbcr0 |= DBSR_DAC1W;
+
+	task->thread.regs->msr |= MSR_DE;
+#endif
 	return 0;
 }
 
@@ -728,7 +875,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			tmp = ptrace_get_reg(child, (int) index);
 		} else {
 			flush_fp_to_thread(child);
-			tmp = ((unsigned long *)child->thread.fpr)[index - PT_FPR0];
+			tmp = ((unsigned long *)child->thread.fpr)
+				[TS_FPRWIDTH * (index - PT_FPR0)];
 		}
 		ret = put_user(tmp,(unsigned long __user *) data);
 		break;
@@ -755,7 +903,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = ptrace_put_reg(child, index, data);
 		} else {
 			flush_fp_to_thread(child);
-			((unsigned long *)child->thread.fpr)[index - PT_FPR0] = data;
+			((unsigned long *)child->thread.fpr)
+				[TS_FPRWIDTH * (index - PT_FPR0)] = data;
 			ret = 0;
 		}
 		break;
@@ -820,6 +969,21 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 						 sizeof(u32)),
 					     (const void __user *) data);
 #endif
+#ifdef CONFIG_VSX
+	case PTRACE_GETVSRREGS:
+		return copy_regset_to_user(child, &user_ppc_native_view,
+					   REGSET_VSX,
+					   0, (32 * sizeof(vector128) +
+					       sizeof(u32)),
+					   (void __user *) data);
+
+	case PTRACE_SETVSRREGS:
+		return copy_regset_from_user(child, &user_ppc_native_view,
+					     REGSET_VSX,
+					     0, (32 * sizeof(vector128) +
+						 sizeof(u32)),
+					     (const void __user *) data);
+#endif
 #ifdef CONFIG_SPE
 	case PTRACE_GETEVRREGS:
 		/* Get the child spe register state. */
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 4c1de6af4c09..67bf1a1e7e14 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -64,6 +64,11 @@ static long compat_ptrace_old(struct task_struct *child, long request,
 	return -EPERM;
 }
 
+/* Macros to workout the correct index for the FPR in the thread struct */
+#define FPRNUMBER(i) (((i) - PT_FPR0) >> 1)
+#define FPRHALF(i) (((i) - PT_FPR0) & 1)
+#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) + FPRHALF(i)
+
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
 {
@@ -122,7 +127,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			 * to be an array of unsigned int (32 bits) - the
 			 * index passed in is based on this assumption.
 			 */
-			tmp = ((unsigned int *)child->thread.fpr)[index - PT_FPR0];
+			tmp = ((unsigned int *)child->thread.fpr)
+				[FPRINDEX(index)];
 		}
 		ret = put_user((unsigned int)tmp, (u32 __user *)data);
 		break;
@@ -162,7 +168,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		CHECK_FULL_REGS(child->thread.regs);
 		if (numReg >= PT_FPR0) {
 			flush_fp_to_thread(child);
-			tmp = ((unsigned long int *)child->thread.fpr)[numReg - PT_FPR0];
+			tmp = ((unsigned long int *)child->thread.fpr)
+				[FPRINDEX(numReg)];
 		} else { /* register within PT_REGS struct */
 			tmp = ptrace_get_reg(child, numReg);
 		} 
@@ -217,7 +224,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			 * to be an array of unsigned int (32 bits) - the
 			 * index passed in is based on this assumption.
 			 */
-			((unsigned int *)child->thread.fpr)[index - PT_FPR0] = data;
+			((unsigned int *)child->thread.fpr)
+				[FPRINDEX(index)] = data;
 			ret = 0;
 		}
 		break;
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index f9c6abc84a94..1be9fe38bcb5 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -160,7 +160,7 @@ static int sensors_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_sensors_show, NULL);
 }
 
-const struct file_operations ppc_rtas_sensors_operations = {
+static const struct file_operations ppc_rtas_sensors_operations = {
 	.open		= sensors_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -172,7 +172,7 @@ static int poweron_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_poweron_show, NULL);
 }
 
-const struct file_operations ppc_rtas_poweron_operations = {
+static const struct file_operations ppc_rtas_poweron_operations = {
 	.open		= poweron_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -185,7 +185,7 @@ static int progress_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_progress_show, NULL);
 }
 
-const struct file_operations ppc_rtas_progress_operations = {
+static const struct file_operations ppc_rtas_progress_operations = {
 	.open		= progress_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -198,7 +198,7 @@ static int clock_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_clock_show, NULL);
 }
 
-const struct file_operations ppc_rtas_clock_operations = {
+static const struct file_operations ppc_rtas_clock_operations = {
 	.open		= clock_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -211,7 +211,7 @@ static int tone_freq_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_tone_freq_show, NULL);
 }
 
-const struct file_operations ppc_rtas_tone_freq_operations = {
+static const struct file_operations ppc_rtas_tone_freq_operations = {
 	.open		= tone_freq_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -224,7 +224,7 @@ static int tone_volume_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_tone_volume_show, NULL);
 }
 
-const struct file_operations ppc_rtas_tone_volume_operations = {
+static const struct file_operations ppc_rtas_tone_volume_operations = {
 	.open		= tone_volume_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -237,7 +237,7 @@ static int rmo_buf_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_rmo_buf_show, NULL);
 }
 
-const struct file_operations ppc_rtas_rmo_buf_ops = {
+static const struct file_operations ppc_rtas_rmo_buf_ops = {
 	.open		= rmo_buf_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 34843c318419..c680f1bbd387 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -340,8 +340,8 @@ int rtas_get_error_log_max(void)
 EXPORT_SYMBOL(rtas_get_error_log_max);
 
 
-char rtas_err_buf[RTAS_ERROR_LOG_MAX];
-int rtas_last_error_token;
+static char rtas_err_buf[RTAS_ERROR_LOG_MAX];
+static int rtas_last_error_token;
 
 /** Return a copy of the detailed error text associated with the
  *  most recent failed call to rtas.  Because the error text
@@ -484,7 +484,7 @@ unsigned int rtas_busy_delay(int status)
 }
 EXPORT_SYMBOL(rtas_busy_delay);
 
-int rtas_error_rc(int rtas_rc)
+static int rtas_error_rc(int rtas_rc)
 {
 	int rc;
 
@@ -747,7 +747,7 @@ static int rtas_ibm_suspend_me(struct rtas_args *args)
 	/* Call function on all CPUs.  One of us will make the
 	 * rtas call
 	 */
-	if (on_each_cpu(rtas_percpu_suspend_me, &data, 1, 0))
+	if (on_each_cpu(rtas_percpu_suspend_me, &data, 0))
 		data.error = -EINVAL;
 
 	wait_for_completion(&done);
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 0a5e22b22729..149cb112cd1a 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -286,7 +286,7 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf,
 }
 
 /* constructor for flash_block_cache */
-void rtas_block_ctor(struct kmem_cache *cache, void *ptr)
+void rtas_block_ctor(void *ptr)
 {
 	memset(ptr, 0, RTAS_BLK_SIZE);
 }
@@ -731,7 +731,7 @@ static const struct file_operations validate_flash_operations = {
 	.release	= validate_flash_release,
 };
 
-int __init rtas_flash_init(void)
+static int __init rtas_flash_init(void)
 {
 	int rc;
 
@@ -817,7 +817,7 @@ cleanup:
 	return rc;
 }
 
-void __exit rtas_flash_cleanup(void)
+static void __exit rtas_flash_cleanup(void)
 {
 	rtas_flash_term_hook = NULL;
 
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 3ab88a9dc70d..589a2797eac2 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -155,12 +155,12 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 	return PCIBIOS_DEVICE_NOT_FOUND;
 }
 
-struct pci_ops rtas_pci_ops = {
+static struct pci_ops rtas_pci_ops = {
 	.read = rtas_pci_read_config,
 	.write = rtas_pci_write_config,
 };
 
-int is_python(struct device_node *dev)
+static int is_python(struct device_node *dev)
 {
 	const char *model = of_get_property(dev, "model", NULL);
 
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index db540eab09f4..61a3f4132087 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -500,6 +500,7 @@ void __init smp_setup_cpu_sibling_map(void)
 }
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_PCSPKR_PLATFORM
 static __init int add_pcspkr(void)
 {
 	struct device_node *np;
@@ -522,6 +523,7 @@ static __init int add_pcspkr(void)
 	return ret;
 }
 device_initcall(add_pcspkr);
+#endif	/* CONFIG_PCSPKR_PLATFORM */
 
 void probe_machine(void)
 {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 5112a4aa801d..066e65c59b58 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -43,10 +43,6 @@
 
 #define DBG(fmt...)
 
-#if defined CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
 int boot_cpuid;
@@ -81,7 +77,7 @@ int ucache_bsize;
  * from the address that it was linked at, so we must use RELOC/PTRRELOC
  * to access static data (including strings).  -- paulus
  */
-unsigned long __init early_init(unsigned long dt_ptr)
+notrace unsigned long __init early_init(unsigned long dt_ptr)
 {
 	unsigned long offset = reloc_offset();
 	struct cpu_spec *spec;
@@ -101,6 +97,10 @@ unsigned long __init early_init(unsigned long dt_ptr)
 			  PTRRELOC(&__start___ftr_fixup),
 			  PTRRELOC(&__stop___ftr_fixup));
 
+	do_lwsync_fixups(spec->cpu_features,
+			 PTRRELOC(&__start___lwsync_fixup),
+			 PTRRELOC(&__stop___lwsync_fixup));
+
 	return KERNELBASE + offset;
 }
 
@@ -111,7 +111,7 @@ unsigned long __init early_init(unsigned long dt_ptr)
  * This is called very early on the boot process, after a minimal
  * MMU environment has been set up but before MMU_init is called.
  */
-void __init machine_init(unsigned long dt_ptr, unsigned long phys)
+notrace void __init machine_init(unsigned long dt_ptr, unsigned long phys)
 {
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
@@ -127,13 +127,18 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys)
 		ppc_md.power_save = ppc6xx_idle;
 #endif
 
+#ifdef CONFIG_E500
+	if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
+	    cpu_has_feature(CPU_FTR_CAN_NAP))
+		ppc_md.power_save = e500_idle;
+#endif
 	if (ppc_md.progress)
 		ppc_md.progress("id mach(): done", 0x200);
 }
 
 #ifdef CONFIG_BOOKE_WDT
 /* Checks wdt=x and wdt_period=xx command-line option */
-int __init early_parse_wdt(char *p)
+notrace int __init early_parse_wdt(char *p)
 {
 	if (p && strncmp(p, "0", 1) != 0)
 	       booke_wdt_enabled = 1;
@@ -248,6 +253,28 @@ static void __init irqstack_early_init(void)
 #define irqstack_early_init()
 #endif
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+static void __init exc_lvl_early_init(void)
+{
+	unsigned int i;
+
+	/* interrupt stacks must be in lowmem, we get that for free on ppc32
+	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	for_each_possible_cpu(i) {
+		critirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+#ifdef CONFIG_BOOKE
+		dbgirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		mcheckirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+#endif
+	}
+}
+#else
+#define exc_lvl_early_init()
+#endif
+
 /* Warning, IO base is not yet inited */
 void __init setup_arch(char **cmdline_p)
 {
@@ -271,18 +298,6 @@ void __init setup_arch(char **cmdline_p)
 
 	xmon_setup();
 
-#if defined(CONFIG_KGDB)
-	if (ppc_md.kgdb_map_scc)
-		ppc_md.kgdb_map_scc();
-	set_debug_traps();
-	if (strstr(cmd_line, "gdb")) {
-		if (ppc_md.progress)
-			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
-		printk("kgdb breakpoint activated\n");
-		breakpoint();
-	}
-#endif
-
 	/*
 	 * Set cache line size based on type of cpu as a default.
 	 * Systems with OF can look in the properties on the cpu node(s)
@@ -305,6 +320,8 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = klimit;
 
+	exc_lvl_early_init();
+
 	irqstack_early_init();
 
 	/* set up the bootmem stuff with available memory */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 098fd96a394a..04d8de9f0fc6 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -363,6 +363,8 @@ void __init setup_system(void)
 			  &__start___ftr_fixup, &__stop___ftr_fixup);
 	do_feature_fixups(powerpc_firmware_features,
 			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
+	do_lwsync_fixups(cur_cpu_spec->cpu_features,
+			 &__start___lwsync_fixup, &__stop___lwsync_fixup);
 
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index a65a44fbe523..7aada783ec6a 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -120,7 +120,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	int ret;
 	int is32 = is_32bit_task();
 
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+	if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
 	else if (!oldset)
 		oldset = &current->blocked;
@@ -131,9 +131,10 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	check_syscall_restart(regs, &ka, signr > 0);
 
 	if (signr <= 0) {
+		struct thread_info *ti = current_thread_info();
 		/* No signal to deliver -- put the saved sigmask back */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
+		if (ti->local_flags & _TLF_RESTORE_SIGMASK) {
+			ti->local_flags &= ~_TLF_RESTORE_SIGMASK;
 			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 		}
 		return 0;               /* no signals delivered */
@@ -144,8 +145,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	 * user space. The DABR will have been cleared if it
 	 * triggered inside the kernel.
 	 */
-	if (current->thread.dabr)
+	if (current->thread.dabr) {
 		set_dabr(current->thread.dabr);
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+		mtspr(SPRN_DBCR0, current->thread.dbcr0);
+#endif
+	}
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)
@@ -169,10 +174,9 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 
 		/*
 		 * A signal was successfully delivered; the saved sigmask is in
-		 * its frame, and we can clear the TIF_RESTORE_SIGMASK flag.
+		 * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
 		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
+		current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
 	}
 
 	return ret;
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 77efb3d5465a..28f4b9f5fe5e 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -24,6 +24,16 @@ extern int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
 			      siginfo_t *info, sigset_t *oldset,
 			      struct pt_regs *regs);
 
+extern unsigned long copy_fpr_to_user(void __user *to,
+				      struct task_struct *task);
+extern unsigned long copy_fpr_from_user(struct task_struct *task,
+					void __user *from);
+#ifdef CONFIG_VSX
+extern unsigned long copy_vsx_to_user(void __user *to,
+				      struct task_struct *task);
+extern unsigned long copy_vsx_from_user(struct task_struct *task,
+					void __user *from);
+#endif
 
 #ifdef CONFIG_PPC64
 
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index ad6943468ee9..3e80aa32b8b0 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -68,6 +68,13 @@
 #define ucontext	ucontext32
 
 /*
+ * Userspace code may pass a ucontext which doesn't include VSX added
+ * at the end.  We need to check for this case.
+ */
+#define UCONTEXTSIZEWITHOUTVSX \
+		(sizeof(struct ucontext) - sizeof(elf_vsrreghalf_t32))
+
+/*
  * Returning 0 means we return to userspace via
  * ret_from_except and thus restore all user
  * registers from *regs.  This is what we need
@@ -243,7 +250,7 @@ long sys_sigsuspend(old_sigset_t mask)
 
  	current->state = TASK_INTERRUPTIBLE;
  	schedule();
- 	set_thread_flag(TIF_RESTORE_SIGMASK);
+	set_restore_sigmask();
  	return -ERESTARTNOHAND;
 }
 
@@ -328,6 +335,75 @@ struct rt_sigframe {
 	int			abigap[56];
 };
 
+#ifdef CONFIG_VSX
+unsigned long copy_fpr_to_user(void __user *to,
+			       struct task_struct *task)
+{
+	double buf[ELF_NFPREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		buf[i] = task->thread.TS_FPR(i);
+	memcpy(&buf[i], &task->thread.fpscr, sizeof(double));
+	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
+}
+
+unsigned long copy_fpr_from_user(struct task_struct *task,
+				 void __user *from)
+{
+	double buf[ELF_NFPREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		task->thread.TS_FPR(i) = buf[i];
+	memcpy(&task->thread.fpscr, &buf[i], sizeof(double));
+
+	return 0;
+}
+
+unsigned long copy_vsx_to_user(void __user *to,
+			       struct task_struct *task)
+{
+	double buf[ELF_NVSRHALFREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < ELF_NVSRHALFREG; i++)
+		buf[i] = task->thread.fpr[i][TS_VSRLOWOFFSET];
+	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
+}
+
+unsigned long copy_vsx_from_user(struct task_struct *task,
+				 void __user *from)
+{
+	double buf[ELF_NVSRHALFREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < ELF_NVSRHALFREG ; i++)
+		task->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+	return 0;
+}
+#else
+inline unsigned long copy_fpr_to_user(void __user *to,
+				      struct task_struct *task)
+{
+	return __copy_to_user(to, task->thread.fpr,
+			      ELF_NFPREG * sizeof(double));
+}
+
+inline unsigned long copy_fpr_from_user(struct task_struct *task,
+					void __user *from)
+{
+	return __copy_from_user(task->thread.fpr, from,
+			      ELF_NFPREG * sizeof(double));
+}
+#endif
+
 /*
  * Save the current user registers on the user stack.
  * We only save the altivec/spe registers if the process has used
@@ -336,13 +412,13 @@ struct rt_sigframe {
 static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 		int sigret)
 {
+	unsigned long msr = regs->msr;
+
 	/* Make sure floating point registers are stored in regs */
 	flush_fp_to_thread(current);
 
-	/* save general and floating-point registers */
-	if (save_general_regs(regs, frame) ||
-	    __copy_to_user(&frame->mc_fregs, current->thread.fpr,
-		    ELF_NFPREG * sizeof(double)))
+	/* save general registers */
+	if (save_general_regs(regs, frame))
 		return 1;
 
 #ifdef CONFIG_ALTIVEC
@@ -354,8 +430,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 			return 1;
 		/* set MSR_VEC in the saved MSR value to indicate that
 		   frame->mc_vregs contains valid data */
-		if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR]))
-			return 1;
+		msr |= MSR_VEC;
 	}
 	/* else assert((regs->msr & MSR_VEC) == 0) */
 
@@ -367,7 +442,22 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 	if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
 		return 1;
 #endif /* CONFIG_ALTIVEC */
-
+	if (copy_fpr_to_user(&frame->mc_fregs, current))
+		return 1;
+#ifdef CONFIG_VSX
+	/*
+	 * Copy VSR 0-31 upper half from thread_struct to local
+	 * buffer, then write that to userspace.  Also set MSR_VSX in
+	 * the saved MSR value to indicate that frame->mc_vregs
+	 * contains valid data
+	 */
+	if (current->thread.used_vsr) {
+		__giveup_vsx(current);
+		if (copy_vsx_to_user(&frame->mc_vsregs, current))
+			return 1;
+		msr |= MSR_VSX;
+	}
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/* save spe registers */
 	if (current->thread.used_spe) {
@@ -377,8 +467,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 			return 1;
 		/* set MSR_SPE in the saved MSR value to indicate that
 		   frame->mc_vregs contains valid data */
-		if (__put_user(regs->msr | MSR_SPE, &frame->mc_gregs[PT_MSR]))
-			return 1;
+		msr |= MSR_SPE;
 	}
 	/* else assert((regs->msr & MSR_SPE) == 0) */
 
@@ -387,6 +476,8 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 		return 1;
 #endif /* CONFIG_SPE */
 
+	if (__put_user(msr, &frame->mc_gregs[PT_MSR]))
+		return 1;
 	if (sigret) {
 		/* Set up the sigreturn trampoline: li r0,sigret; sc */
 		if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
@@ -409,6 +500,9 @@ static long restore_user_regs(struct pt_regs *regs,
 	long err;
 	unsigned int save_r2 = 0;
 	unsigned long msr;
+#ifdef CONFIG_VSX
+	int i;
+#endif
 
 	/*
 	 * restore general registers but not including MSR or SOFTE. Also
@@ -436,16 +530,11 @@ static long restore_user_regs(struct pt_regs *regs,
 	 */
 	discard_lazy_cpu_state();
 
-	/* force the process to reload the FP registers from
-	   current->thread when it next does FP instructions */
-	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
-	if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
-			     sizeof(sr->mc_fregs)))
-		return 1;
-
 #ifdef CONFIG_ALTIVEC
-	/* force the process to reload the altivec registers from
-	   current->thread when it next does altivec instructions */
+	/*
+	 * Force the process to reload the altivec registers from
+	 * current->thread when it next does altivec instructions
+	 */
 	regs->msr &= ~MSR_VEC;
 	if (msr & MSR_VEC) {
 		/* restore altivec registers from the stack */
@@ -459,6 +548,31 @@ static long restore_user_regs(struct pt_regs *regs,
 	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
 		return 1;
 #endif /* CONFIG_ALTIVEC */
+	if (copy_fpr_from_user(current, &sr->mc_fregs))
+		return 1;
+
+#ifdef CONFIG_VSX
+	/*
+	 * Force the process to reload the VSX registers from
+	 * current->thread when it next does VSX instruction.
+	 */
+	regs->msr &= ~MSR_VSX;
+	if (msr & MSR_VSX) {
+		/*
+		 * Restore altivec registers from the stack to a local
+		 * buffer, then write this out to the thread_struct
+		 */
+		if (copy_vsx_from_user(current, &sr->mc_vsregs))
+			return 1;
+	} else if (current->thread.used_vsr)
+		for (i = 0; i < 32 ; i++)
+			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
+#endif /* CONFIG_VSX */
+	/*
+	 * force the process to reload the FP registers from
+	 * current->thread when it next does FP instructions
+	 */
+	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
 
 #ifdef CONFIG_SPE
 	/* force the process to reload the spe registers from
@@ -823,12 +937,42 @@ long sys_swapcontext(struct ucontext __user *old_ctx,
 {
 	unsigned char tmp;
 
+#ifdef CONFIG_PPC64
+	unsigned long new_msr = 0;
+
+	if (new_ctx &&
+	    __get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR]))
+		return -EFAULT;
+	/*
+	 * Check that the context is not smaller than the original
+	 * size (with VMX but without VSX)
+	 */
+	if (ctx_size < UCONTEXTSIZEWITHOUTVSX)
+		return -EINVAL;
+	/*
+	 * If the new context state sets the MSR VSX bits but
+	 * it doesn't provide VSX state.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (new_msr & MSR_VSX))
+		return -EINVAL;
+#ifdef CONFIG_VSX
+	/*
+	 * If userspace doesn't provide enough room for VSX data,
+	 * but current thread has used VSX, we don't have anywhere
+	 * to store the full context back into.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (current->thread.used_vsr && old_ctx))
+		return -EINVAL;
+#endif
+#else
 	/* Context size is for future use. Right now, we only make sure
 	 * we are passed something we understand
 	 */
 	if (ctx_size < sizeof(struct ucontext))
 		return -EINVAL;
-
+#endif
 	if (old_ctx != NULL) {
 		struct mcontext __user *mctx;
 
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index da7c058e3731..65ad925c3a8f 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -112,11 +112,29 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 #else /* CONFIG_ALTIVEC */
 	err |= __put_user(0, &sc->v_regs);
 #endif /* CONFIG_ALTIVEC */
+	flush_fp_to_thread(current);
+	/* copy fpr regs and fpscr */
+	err |= copy_fpr_to_user(&sc->fp_regs, current);
+#ifdef CONFIG_VSX
+	/*
+	 * Copy VSX low doubleword to local buffer for formatting,
+	 * then out to userspace.  Update v_regs to point after the
+	 * VMX data.
+	 */
+	if (current->thread.used_vsr) {
+		__giveup_vsx(current);
+		v_regs += ELF_NVRREG;
+		err |= copy_vsx_to_user(v_regs, current);
+		/* set MSR_VSX in the MSR value in the frame to
+		 * indicate that sc->vs_reg) contains valid data.
+		 */
+		msr |= MSR_VSX;
+	}
+#endif /* CONFIG_VSX */
 	err |= __put_user(&sc->gp_regs, &sc->regs);
 	WARN_ON(!FULL_REGS(regs));
 	err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
 	err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
-	err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
 	err |= __put_user(signr, &sc->signal);
 	err |= __put_user(handler, &sc->handler);
 	if (set != NULL)
@@ -137,29 +155,32 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 #endif
 	unsigned long err = 0;
 	unsigned long save_r13 = 0;
-	elf_greg_t *gregs = (elf_greg_t *)regs;
 	unsigned long msr;
+#ifdef CONFIG_VSX
 	int i;
+#endif
 
 	/* If this is not a signal return, we preserve the TLS in r13 */
 	if (!sig)
 		save_r13 = regs->gpr[13];
 
-	/* copy everything before MSR */
-	err |= __copy_from_user(regs, &sc->gp_regs,
-				PT_MSR*sizeof(unsigned long));
-
+	/* copy the GPRs */
+	err |= __copy_from_user(regs->gpr, sc->gp_regs, sizeof(regs->gpr));
+	err |= __get_user(regs->nip, &sc->gp_regs[PT_NIP]);
 	/* get MSR separately, transfer the LE bit if doing signal return */
 	err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
 	if (sig)
 		regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
-
+	err |= __get_user(regs->orig_gpr3, &sc->gp_regs[PT_ORIG_R3]);
+	err |= __get_user(regs->ctr, &sc->gp_regs[PT_CTR]);
+	err |= __get_user(regs->link, &sc->gp_regs[PT_LNK]);
+	err |= __get_user(regs->xer, &sc->gp_regs[PT_XER]);
+	err |= __get_user(regs->ccr, &sc->gp_regs[PT_CCR]);
 	/* skip SOFTE */
-	for (i = PT_MSR+1; i <= PT_RESULT; i++) {
-		if (i == PT_SOFTE)
-			continue;
-		err |= __get_user(gregs[i], &sc->gp_regs[i]);
-	}
+	err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);
+	err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]);
+	err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]);
+	err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);
 
 	if (!sig)
 		regs->gpr[13] = save_r13;
@@ -180,9 +201,7 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	 * This has to be done before copying stuff into current->thread.fpr/vr
 	 * for the reasons explained in the previous comment.
 	 */
-	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC);
-
-	err |= __copy_from_user(&current->thread.fpr, &sc->fp_regs, FP_REGS_SIZE);
+	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX);
 
 #ifdef CONFIG_ALTIVEC
 	err |= __get_user(v_regs, &sc->v_regs);
@@ -202,7 +221,23 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	else
 		current->thread.vrsave = 0;
 #endif /* CONFIG_ALTIVEC */
+	/* restore floating point */
+	err |= copy_fpr_from_user(current, &sc->fp_regs);
+#ifdef CONFIG_VSX
+	/*
+	 * Get additional VSX data. Update v_regs to point after the
+	 * VMX data.  Copy VSX low doubleword from userspace to local
+	 * buffer for formatting, then into the taskstruct.
+	 */
+	v_regs += ELF_NVRREG;
+	if ((msr & MSR_VSX) != 0)
+		err |= copy_vsx_from_user(current, v_regs);
+	else
+		for (i = 0; i < 32 ; i++)
+			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
 
+#else
+#endif
 	return err;
 }
 
@@ -233,6 +268,13 @@ static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp)
 }
 
 /*
+ * Userspace code may pass a ucontext which doesn't include VSX added
+ * at the end.  We need to check for this case.
+ */
+#define UCONTEXTSIZEWITHOUTVSX \
+		(sizeof(struct ucontext) - 32*sizeof(long))
+
+/*
  * Handle {get,set,swap}_context operations
  */
 int sys_swapcontext(struct ucontext __user *old_ctx,
@@ -241,13 +283,34 @@ int sys_swapcontext(struct ucontext __user *old_ctx,
 {
 	unsigned char tmp;
 	sigset_t set;
+	unsigned long new_msr = 0;
 
-	/* Context size is for future use. Right now, we only make sure
-	 * we are passed something we understand
+	if (new_ctx &&
+	    __get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR]))
+		return -EFAULT;
+	/*
+	 * Check that the context is not smaller than the original
+	 * size (with VMX but without VSX)
 	 */
-	if (ctx_size < sizeof(struct ucontext))
+	if (ctx_size < UCONTEXTSIZEWITHOUTVSX)
 		return -EINVAL;
-
+	/*
+	 * If the new context state sets the MSR VSX bits but
+	 * it doesn't provide VSX state.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (new_msr & MSR_VSX))
+		return -EINVAL;
+#ifdef CONFIG_VSX
+	/*
+	 * If userspace doesn't provide enough room for VSX data,
+	 * but current thread has used VSX, we don't have anywhere
+	 * to store the full context back into.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (current->thread.used_vsr && old_ctx))
+		return -EINVAL;
+#endif
 	if (old_ctx != NULL) {
 		if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
 		    || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 1457aa0a08f1..f5ae9fa222ea 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -72,12 +72,8 @@ struct smp_ops_t *smp_ops;
 
 static volatile unsigned int cpu_callin_map[NR_CPUS];
 
-void smp_call_function_interrupt(void);
-
 int smt_enabled_at_boot = 1;
 
-static int ipi_fail_ok;
-
 static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL;
 
 #ifdef CONFIG_PPC64
@@ -99,12 +95,15 @@ void smp_message_recv(int msg)
 {
 	switch(msg) {
 	case PPC_MSG_CALL_FUNCTION:
-		smp_call_function_interrupt();
+		generic_smp_call_function_interrupt();
 		break;
 	case PPC_MSG_RESCHEDULE:
 		/* XXX Do we have to do this? */
 		set_need_resched();
 		break;
+	case PPC_MSG_CALL_FUNC_SINGLE:
+		generic_smp_call_function_single_interrupt();
+		break;
 	case PPC_MSG_DEBUGGER_BREAK:
 		if (crash_ipi_function_ptr) {
 			crash_ipi_function_ptr(get_irq_regs());
@@ -128,6 +127,19 @@ void smp_send_reschedule(int cpu)
 		smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE);
 }
 
+void arch_send_call_function_single_ipi(int cpu)
+{
+	smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNC_SINGLE);
+}
+
+void arch_send_call_function_ipi(cpumask_t mask)
+{
+	unsigned int cpu;
+
+	for_each_cpu_mask(cpu, mask)
+		smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
+}
+
 #ifdef CONFIG_DEBUGGER
 void smp_send_debugger_break(int cpu)
 {
@@ -154,223 +166,13 @@ static void stop_this_cpu(void *dummy)
 		;
 }
 
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- * Stolen from the i386 version.
- */
-static  __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
-
-static struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-} *call_data;
-
-/* delay of at least 8 seconds */
-#define SMP_CALL_TIMEOUT	8
-
-/*
- * These functions send a 'generic call function' IPI to other online
- * CPUS in the system.
- *
- * [SUMMARY] Run a function on other CPUs.
- * <func> The function to run. This must be fast and non-blocking.
- * <info> An arbitrary pointer to pass to the function.
- * <nonatomic> currently unused.
- * <wait> If true, wait (atomically) until function has completed on other CPUs.
- * [RETURNS] 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- * <map> is a cpu map of the cpus to send IPI to.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-static int __smp_call_function_map(void (*func) (void *info), void *info,
-				   int nonatomic, int wait, cpumask_t map)
-{
-	struct call_data_struct data;
-	int ret = -1, num_cpus;
-	int cpu;
-	u64 timeout;
-
-	if (unlikely(smp_ops == NULL))
-		return ret;
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	/* remove 'self' from the map */
-	if (cpu_isset(smp_processor_id(), map))
-		cpu_clear(smp_processor_id(), map);
-
-	/* sanity check the map, remove any non-online processors. */
-	cpus_and(map, map, cpu_online_map);
-
-	num_cpus = cpus_weight(map);
-	if (!num_cpus)
-		goto done;
-
-	call_data = &data;
-	smp_wmb();
-	/* Send a message to all CPUs in the map */
-	for_each_cpu_mask(cpu, map)
-		smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
-
-	timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec;
-
-	/* Wait for indication that they have received the message */
-	while (atomic_read(&data.started) != num_cpus) {
-		HMT_low();
-		if (get_tb() >= timeout) {
-			printk("smp_call_function on cpu %d: other cpus not "
-				"responding (%d)\n", smp_processor_id(),
-				atomic_read(&data.started));
-			if (!ipi_fail_ok)
-				debugger(NULL);
-			goto out;
-		}
-	}
-
-	/* optionally wait for the CPUs to complete */
-	if (wait) {
-		while (atomic_read(&data.finished) != num_cpus) {
-			HMT_low();
-			if (get_tb() >= timeout) {
-				printk("smp_call_function on cpu %d: other "
-					"cpus not finishing (%d/%d)\n",
-					smp_processor_id(),
-					atomic_read(&data.finished),
-					atomic_read(&data.started));
-				debugger(NULL);
-				goto out;
-			}
-		}
-	}
-
- done:
-	ret = 0;
-
- out:
-	call_data = NULL;
-	HMT_medium();
-	return ret;
-}
-
-static int __smp_call_function(void (*func)(void *info), void *info,
-			       int nonatomic, int wait)
-{
-	int ret;
-	spin_lock(&call_lock);
-	ret =__smp_call_function_map(func, info, nonatomic, wait,
-				       cpu_online_map);
-	spin_unlock(&call_lock);
-	return ret;
-}
-
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-			int wait)
-{
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	return __smp_call_function(func, info, nonatomic, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-			     int nonatomic, int wait)
-{
-	cpumask_t map = CPU_MASK_NONE;
-	int ret = 0;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	if (!cpu_online(cpu))
-		return -EINVAL;
-
-	cpu_set(cpu, map);
-	if (cpu != get_cpu()) {
-		spin_lock(&call_lock);
-		ret = __smp_call_function_map(func, info, nonatomic, wait, map);
-		spin_unlock(&call_lock);
-	} else {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-	}
-	put_cpu();
-	return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
 void smp_send_stop(void)
 {
-	int nolock;
-
-	/* It's OK to fail sending the IPI, since the alternative is to
-	 * be stuck forever waiting on the other CPU to take the interrupt.
-	 *
-	 * It's better to at least continue and go through reboot, since this
-	 * function is usually called at panic or reboot time in the first
-	 * place.
-	 */
-	ipi_fail_ok = 1;
-
-	/* Don't deadlock in case we got called through panic */
-	nolock = !spin_trylock(&call_lock);
-	__smp_call_function_map(stop_this_cpu, NULL, 1, 0, cpu_online_map);
-	if (!nolock)
-		spin_unlock(&call_lock);
-}
-
-void smp_call_function_interrupt(void)
-{
-	void (*func) (void *info);
-	void *info;
-	int wait;
-
-	/* call_data will be NULL if the sender timed out while
-	 * waiting on us to receive the call.
-	 */
-	if (!call_data)
-		return;
-
-	func = call_data->func;
-	info = call_data->info;
-	wait = call_data->wait;
-
-	if (!wait)
-		smp_mb__before_atomic_inc();
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
-	(*func)(info);
-	if (wait) {
-		smp_mb__before_atomic_inc();
-		atomic_inc(&call_data->finished);
-	}
+	smp_call_function(stop_this_cpu, NULL, 0);
 }
 
-extern struct gettimeofday_struct do_gtod;
-
 struct thread_info *current_set[NR_CPUS];
 
-DECLARE_PER_CPU(unsigned int, pvr);
-
 static void __devinit smp_store_cpu_info(int id)
 {
 	per_cpu(pvr, id) = mfspr(SPRN_PVR);
@@ -596,9 +398,9 @@ int __devinit start_secondary(void *unused)
 
 	secondary_cpu_time_init();
 
-	spin_lock(&call_lock);
+	ipi_call_lock();
 	cpu_set(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
+	ipi_call_unlock();
 
 	local_irq_enable();
 
diff --git a/arch/powerpc/kernel/softemu8xx.c b/arch/powerpc/kernel/softemu8xx.c
index 67d6f6890edc..c906c4bf6835 100644
--- a/arch/powerpc/kernel/softemu8xx.c
+++ b/arch/powerpc/kernel/softemu8xx.c
@@ -124,7 +124,7 @@ int Soft_emulate_8xx(struct pt_regs *regs)
 	disp = instword & 0xffff;
 
 	ea = (u32 *)(regs->gpr[idxreg] + disp);
-	ip = (u32 *)&current->thread.fpr[flreg];
+	ip = (u32 *)&current->thread.TS_FPR(flreg);
 
 	switch ( inst )
 	{
@@ -168,7 +168,7 @@ int Soft_emulate_8xx(struct pt_regs *regs)
 		break;
 	case FMR:
 		/* assume this is a fp move -- Cort */
-		memcpy(ip, &current->thread.fpr[(instword>>11)&0x1f],
+		memcpy(ip, &current->thread.TS_FPR((instword>>11)&0x1f),
 		       sizeof(double));
 		break;
 	default:
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index 962944038430..f2589645870a 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -10,33 +10,35 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
+#include <linux/module.h>
 #include <asm/ptrace.h>
+#include <asm/processor.h>
 
 /*
  * Save stack-backtrace addresses into a stack_trace buffer.
  */
-void save_stack_trace(struct stack_trace *trace)
+static void save_context_stack(struct stack_trace *trace, unsigned long sp,
+			struct task_struct *tsk, int savesched)
 {
-	unsigned long sp;
-
-	asm("mr %0,1" : "=r" (sp));
-
 	for (;;) {
 		unsigned long *stack = (unsigned long *) sp;
 		unsigned long newsp, ip;
 
-		if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+		if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD))
 			return;
 
 		newsp = stack[0];
 		ip = stack[STACK_FRAME_LR_SAVE];
 
-		if (!trace->skip)
-			trace->entries[trace->nr_entries++] = ip;
-		else
-			trace->skip--;
+		if (savesched || !in_sched_functions(ip)) {
+			if (!trace->skip)
+				trace->entries[trace->nr_entries++] = ip;
+			else
+				trace->skip--;
+		}
 
 		if (trace->nr_entries >= trace->max_entries)
 			return;
@@ -44,3 +46,19 @@ void save_stack_trace(struct stack_trace *trace)
 		sp = newsp;
 	}
 }
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long sp;
+
+	asm("mr %0,1" : "=r" (sp));
+
+	save_context_stack(trace, sp, current, 1);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	save_context_stack(trace, tsk->thread.ksp, tsk, 0);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c
index 8cee57107541..6fc6328dc626 100644
--- a/arch/powerpc/kernel/suspend.c
+++ b/arch/powerpc/kernel/suspend.c
@@ -7,6 +7,7 @@
  * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
  */
 
+#include <linux/mm.h>
 #include <asm/page.h>
 
 /* References to section boundaries */
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 4fe69ca24481..c04832c4a02e 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -143,6 +143,9 @@ static inline unsigned long do_mmap2(unsigned long addr, size_t len,
 	struct file * file = NULL;
 	unsigned long ret = -EINVAL;
 
+	if (!arch_validate_prot(prot))
+		goto out;
+
 	if (shift) {
 		if (off & ((1 << shift) - 1))
 			goto out;
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index c8127f832df0..800e5e9a087b 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -28,7 +28,9 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 /* Time in microseconds we delay before sleeping in the idle loop */
 DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
 
-static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
+static ssize_t store_smt_snooze_delay(struct sys_device *dev,
+				      struct sysdev_attribute *attr,
+				      const char *buf,
 				      size_t count)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
@@ -44,7 +46,9 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_smt_snooze_delay(struct sys_device *dev, char *buf)
+static ssize_t show_smt_snooze_delay(struct sys_device *dev,
+				     struct sysdev_attribute *attr,
+				     char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
@@ -152,14 +156,17 @@ static unsigned long write_##NAME(unsigned long val) \
 	mtspr(ADDRESS, val); \
 	return 0; \
 } \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+			struct sysdev_attribute *attr, \
+			char *buf) \
 { \
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
 	unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \
 	return sprintf(buf, "%lx\n", val); \
 } \
 static ssize_t __used \
-	store_##NAME(struct sys_device *dev, const char *buf, size_t count) \
+	store_##NAME(struct sys_device *dev, struct sysdev_attribute *attr, \
+			const char *buf, size_t count) \
 { \
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
 	unsigned long val; \
@@ -522,7 +529,8 @@ static void register_nodes(void)
 #endif
 
 /* Only valid if CPU is present. */
-static ssize_t show_physical_id(struct sys_device *dev, char *buf)
+static ssize_t show_physical_id(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index 368a4934f7ee..c3a56d65c5a9 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -192,7 +192,7 @@ static void tau_timeout_smp(unsigned long unused)
 
 	/* schedule ourselves to be run again */
 	mod_timer(&tau_timer, jiffies + shrink_timer) ;
-	on_each_cpu(tau_timeout, NULL, 1, 0);
+	on_each_cpu(tau_timeout, NULL, 0);
 }
 
 /*
@@ -234,7 +234,7 @@ int __init TAU_init(void)
 	tau_timer.expires = jiffies + shrink_timer;
 	add_timer(&tau_timer);
 
-	on_each_cpu(TAU_init_smp, NULL, 1, 0);
+	on_each_cpu(TAU_init_smp, NULL, 0);
 
 	printk("Thermal assist unit ");
 #ifdef CONFIG_TAU_INT
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 73401e83739a..e2ee66b5831d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -129,7 +129,7 @@ static unsigned long __initdata iSeries_recal_titan;
 static signed long __initdata iSeries_recal_tb;
 
 /* Forward declaration is only needed for iSereis compiles */
-void __init clocksource_init(void);
+static void __init clocksource_init(void);
 #endif
 
 #define XSEC_PER_SEC (1024*1024)
@@ -150,8 +150,8 @@ u64 tb_to_xs;
 unsigned tb_to_us;
 
 #define TICKLEN_SCALE	NTP_SCALE_SHIFT
-u64 last_tick_len;	/* units are ns / 2^TICKLEN_SCALE */
-u64 ticklen_to_xs;	/* 0.64 fraction */
+static u64 last_tick_len;	/* units are ns / 2^TICKLEN_SCALE */
+static u64 ticklen_to_xs;	/* 0.64 fraction */
 
 /* If last_tick_len corresponds to about 1/HZ seconds, then
    last_tick_len << TICKLEN_SHIFT will be about 2^63. */
@@ -164,7 +164,7 @@ static u64 tb_to_ns_scale __read_mostly;
 static unsigned tb_to_ns_shift __read_mostly;
 static unsigned long boot_tb __read_mostly;
 
-struct gettimeofday_struct do_gtod;
+static struct gettimeofday_struct do_gtod;
 
 extern struct timezone sys_tz;
 static long timezone_offset;
@@ -322,7 +322,7 @@ void snapshot_timebases(void)
 {
 	if (!cpu_has_feature(CPU_FTR_PURR))
 		return;
-	on_each_cpu(snapshot_tb_and_purr, NULL, 0, 1);
+	on_each_cpu(snapshot_tb_and_purr, NULL, 1);
 }
 
 /*
@@ -742,10 +742,6 @@ void __init generic_calibrate_decr(void)
 	}
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
 	/* Clear any pending timer interrupts */
 	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
 
@@ -832,7 +828,7 @@ void update_vsyscall_tz(void)
 	++vdso_data->tb_update_count;
 }
 
-void __init clocksource_init(void)
+static void __init clocksource_init(void)
 {
 	struct clocksource *clock;
 
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 4b5b7ff4f78b..81ccb8dd1a54 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -967,6 +967,20 @@ void altivec_unavailable_exception(struct pt_regs *regs)
 	die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT);
 }
 
+void vsx_unavailable_exception(struct pt_regs *regs)
+{
+	if (user_mode(regs)) {
+		/* A user program has executed an vsx instruction,
+		   but this kernel doesn't support vsx. */
+		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+		return;
+	}
+
+	printk(KERN_EMERG "Unrecoverable VSX Unavailable Exception "
+			"%lx at %lx\n", regs->trap, regs->nip);
+	die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT);
+}
+
 void performance_monitor_exception(struct pt_regs *regs)
 {
 	perf_irq(regs);
@@ -1030,21 +1044,45 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
 
-void DebugException(struct pt_regs *regs, unsigned long debug_status)
+void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
 	if (debug_status & DBSR_IC) {	/* instruction completion */
 		regs->msr &= ~MSR_DE;
+
+		/* Disable instruction completion */
+		mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
+		/* Clear the instruction completion event */
+		mtspr(SPRN_DBSR, DBSR_IC);
+
+		if (notify_die(DIE_SSTEP, "single_step", regs, 5,
+			       5, SIGTRAP) == NOTIFY_STOP) {
+			return;
+		}
+
+		if (debugger_sstep(regs))
+			return;
+
 		if (user_mode(regs)) {
 			current->thread.dbcr0 &= ~DBCR0_IC;
+		}
+
+		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+	} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
+		regs->msr &= ~MSR_DE;
+
+		if (user_mode(regs)) {
+			current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W |
+								DBCR0_IDM);
 		} else {
-			/* Disable instruction completion */
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
-			/* Clear the instruction completion event */
-			mtspr(SPRN_DBSR, DBSR_IC);
-			if (debugger_sstep(regs))
-				return;
+			/* Disable DAC interupts */
+			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R |
+						DBSR_DAC1W | DBCR0_IDM));
+
+			/* Clear the DAC event */
+			mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W));
 		}
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
+		/* Setup and send the trap to the handler */
+		do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
 	}
 }
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
@@ -1091,6 +1129,21 @@ void altivec_assist_exception(struct pt_regs *regs)
 }
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_VSX
+void vsx_assist_exception(struct pt_regs *regs)
+{
+	if (!user_mode(regs)) {
+		printk(KERN_EMERG "VSX assist exception in kernel mode"
+		       " at %lx\n", regs->nip);
+		die("Kernel VSX assist exception", regs, SIGILL);
+	}
+
+	flush_vsx_to_thread(current);
+	printk(KERN_INFO "VSX assist not supported at %lx\n", regs->nip);
+	_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+}
+#endif /* CONFIG_VSX */
+
 #ifdef CONFIG_FSL_BOOKE
 void CacheLockingException(struct pt_regs *regs, unsigned long address,
 			   unsigned long error_code)
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index ce245a850db2..f177c60ea766 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -571,6 +571,11 @@ static __init int vdso_fixup_features(struct lib32_elfinfo *v32,
 	if (start64)
 		do_feature_fixups(powerpc_firmware_features,
 				  start64, start64 + size64);
+
+	start64 = find_section64(v64->hdr, "__lwsync_fixup", &size64);
+	if (start64)
+		do_lwsync_fixups(cur_cpu_spec->cpu_features,
+				 start64, start64 + size64);
 #endif /* CONFIG_PPC64 */
 
 	start32 = find_section32(v32->hdr, "__ftr_fixup", &size32);
@@ -585,6 +590,11 @@ static __init int vdso_fixup_features(struct lib32_elfinfo *v32,
 				  start32, start32 + size32);
 #endif /* CONFIG_PPC64 */
 
+	start32 = find_section32(v32->hdr, "__lwsync_fixup", &size32);
+	if (start32)
+		do_lwsync_fixups(cur_cpu_spec->cpu_features,
+				 start32, start32 + size32);
+
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 9352ab5200e5..be3b6a41dc09 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -24,7 +24,7 @@ SECTIONS
 
 	. = ALIGN(16);
 	.text		: {
-		*(.text .stub .text.* .gnu.linkonce.t.*)
+		*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
 	}
 	PROVIDE(__etext = .);
 	PROVIDE(_etext = .);
@@ -33,6 +33,9 @@ SECTIONS
 	. = ALIGN(8);
 	__ftr_fixup	: { *(__ftr_fixup) }
 
+	. = ALIGN(8);
+	__lwsync_fixup	: { *(__lwsync_fixup) }
+
 #ifdef CONFIG_PPC64
 	. = ALIGN(8);
 	__fw_ftr_fixup	: { *(__fw_ftr_fixup) }
diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S
index 932b3fdb34b9..d0b2526dd38d 100644
--- a/arch/powerpc/kernel/vdso64/vdso64.lds.S
+++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S
@@ -24,7 +24,7 @@ SECTIONS
 
 	. = ALIGN(16);
 	.text		: {
-		*(.text .stub .text.* .gnu.linkonce.t.*)
+		*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
 		*(.sfpr .glink)
 	}						:text
 	PROVIDE(__etext = .);
@@ -35,6 +35,9 @@ SECTIONS
 	__ftr_fixup	: { *(__ftr_fixup) }
 
 	. = ALIGN(8);
+	__lwsync_fixup	: { *(__lwsync_fixup) }
+
+	. = ALIGN(8);
 	__fw_ftr_fixup	: { *(__fw_ftr_fixup) }
 
 	/*
@@ -43,15 +46,15 @@ SECTIONS
 	.rodata		: { *(.rodata .rodata.* .gnu.linkonce.r.*) }
 	.rodata1	: { *(.rodata1) }
 
+	.dynamic	: { *(.dynamic) }		:text	:dynamic
+
 	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
 	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
 	.gcc_except_table : { *(.gcc_except_table) }
+	.rela.dyn ALIGN(8) : { *(.rela.dyn) }
 
 	.opd ALIGN(8)	: { KEEP (*(.opd)) }
 	.got ALIGN(8)	: { *(.got .toc) }
-	.rela.dyn ALIGN(8) : { *(.rela.dyn) }
-
-	.dynamic	: { *(.dynamic) }		:text	:dynamic
 
 	_end = .;
 	PROVIDE(end = .);
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index b77f8af7ddde..ade8aeaa2e70 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1,11 +1,12 @@
 /*
  * IBM PowerPC Virtual I/O Infrastructure Support.
  *
- *    Copyright (c) 2003-2005 IBM Corp.
+ *    Copyright (c) 2003,2008 IBM Corp.
  *     Dave Engebretsen engebret@us.ibm.com
  *     Santiago Leon santil@us.ibm.com
  *     Hollis Blanchard <hollisb@us.ibm.com>
  *     Stephen Rothwell
+ *     Robert Jennings <rcjenn@us.ibm.com>
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -46,6 +47,996 @@ static struct vio_dev vio_bus_device  = { /* fake "parent" device */
 	.dev.bus = &vio_bus_type,
 };
 
+#ifdef CONFIG_PPC_SMLPAR
+/**
+ * vio_cmo_pool - A pool of IO memory for CMO use
+ *
+ * @size: The size of the pool in bytes
+ * @free: The amount of free memory in the pool
+ */
+struct vio_cmo_pool {
+	size_t size;
+	size_t free;
+};
+
+/* How many ms to delay queued balance work */
+#define VIO_CMO_BALANCE_DELAY 100
+
+/* Portion out IO memory to CMO devices by this chunk size */
+#define VIO_CMO_BALANCE_CHUNK 131072
+
+/**
+ * vio_cmo_dev_entry - A device that is CMO-enabled and requires entitlement
+ *
+ * @vio_dev: struct vio_dev pointer
+ * @list: pointer to other devices on bus that are being tracked
+ */
+struct vio_cmo_dev_entry {
+	struct vio_dev *viodev;
+	struct list_head list;
+};
+
+/**
+ * vio_cmo - VIO bus accounting structure for CMO entitlement
+ *
+ * @lock: spinlock for entire structure
+ * @balance_q: work queue for balancing system entitlement
+ * @device_list: list of CMO-enabled devices requiring entitlement
+ * @entitled: total system entitlement in bytes
+ * @reserve: pool of memory from which devices reserve entitlement, incl. spare
+ * @excess: pool of excess entitlement not needed for device reserves or spare
+ * @spare: IO memory for device hotplug functionality
+ * @min: minimum necessary for system operation
+ * @desired: desired memory for system operation
+ * @curr: bytes currently allocated
+ * @high: high water mark for IO data usage
+ */
+struct vio_cmo {
+	spinlock_t lock;
+	struct delayed_work balance_q;
+	struct list_head device_list;
+	size_t entitled;
+	struct vio_cmo_pool reserve;
+	struct vio_cmo_pool excess;
+	size_t spare;
+	size_t min;
+	size_t desired;
+	size_t curr;
+	size_t high;
+} vio_cmo;
+
+/**
+ * vio_cmo_OF_devices - Count the number of OF devices that have DMA windows
+ */
+static int vio_cmo_num_OF_devs(void)
+{
+	struct device_node *node_vroot;
+	int count = 0;
+
+	/*
+	 * Count the number of vdevice entries with an
+	 * ibm,my-dma-window OF property
+	 */
+	node_vroot = of_find_node_by_name(NULL, "vdevice");
+	if (node_vroot) {
+		struct device_node *of_node;
+		struct property *prop;
+
+		for_each_child_of_node(node_vroot, of_node) {
+			prop = of_find_property(of_node, "ibm,my-dma-window",
+			                       NULL);
+			if (prop)
+				count++;
+		}
+	}
+	of_node_put(node_vroot);
+	return count;
+}
+
+/**
+ * vio_cmo_alloc - allocate IO memory for CMO-enable devices
+ *
+ * @viodev: VIO device requesting IO memory
+ * @size: size of allocation requested
+ *
+ * Allocations come from memory reserved for the devices and any excess
+ * IO memory available to all devices.  The spare pool used to service
+ * hotplug must be equal to %VIO_CMO_MIN_ENT for the excess pool to be
+ * made available.
+ *
+ * Return codes:
+ *  0 for successful allocation and -ENOMEM for a failure
+ */
+static inline int vio_cmo_alloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t reserve_free = 0;
+	size_t excess_free = 0;
+	int ret = -ENOMEM;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Determine the amount of free entitlement available in reserve */
+	if (viodev->cmo.entitled > viodev->cmo.allocated)
+		reserve_free = viodev->cmo.entitled - viodev->cmo.allocated;
+
+	/* If spare is not fulfilled, the excess pool can not be used. */
+	if (vio_cmo.spare >= VIO_CMO_MIN_ENT)
+		excess_free = vio_cmo.excess.free;
+
+	/* The request can be satisfied */
+	if ((reserve_free + excess_free) >= size) {
+		vio_cmo.curr += size;
+		if (vio_cmo.curr > vio_cmo.high)
+			vio_cmo.high = vio_cmo.curr;
+		viodev->cmo.allocated += size;
+		size -= min(reserve_free, size);
+		vio_cmo.excess.free -= size;
+		ret = 0;
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return ret;
+}
+
+/**
+ * vio_cmo_dealloc - deallocate IO memory from CMO-enable devices
+ * @viodev: VIO device freeing IO memory
+ * @size: size of deallocation
+ *
+ * IO memory is freed by the device back to the correct memory pools.
+ * The spare pool is replenished first from either memory pool, then
+ * the reserve pool is used to reduce device entitlement, the excess
+ * pool is used to increase the reserve pool toward the desired entitlement
+ * target, and then the remaining memory is returned to the pools.
+ *
+ */
+static inline void vio_cmo_dealloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t spare_needed = 0;
+	size_t excess_freed = 0;
+	size_t reserve_freed = size;
+	size_t tmp;
+	int balance = 0;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.curr -= size;
+
+	/* Amount of memory freed from the excess pool */
+	if (viodev->cmo.allocated > viodev->cmo.entitled) {
+		excess_freed = min(reserve_freed, (viodev->cmo.allocated -
+		                                   viodev->cmo.entitled));
+		reserve_freed -= excess_freed;
+	}
+
+	/* Remove allocation from device */
+	viodev->cmo.allocated -= (reserve_freed + excess_freed);
+
+	/* Spare is a subset of the reserve pool, replenish it first. */
+	spare_needed = VIO_CMO_MIN_ENT - vio_cmo.spare;
+
+	/*
+	 * Replenish the spare in the reserve pool from the excess pool.
+	 * This moves entitlement into the reserve pool.
+	 */
+	if (spare_needed && excess_freed) {
+		tmp = min(excess_freed, spare_needed);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		vio_cmo.spare += tmp;
+		excess_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Replenish the spare in the reserve pool from the reserve pool.
+	 * This removes entitlement from the device down to VIO_CMO_MIN_ENT,
+	 * if needed, and gives it to the spare pool. The amount of used
+	 * memory in this pool does not change.
+	 */
+	if (spare_needed && reserve_freed) {
+		tmp = min(spare_needed, min(reserve_freed,
+		                            (viodev->cmo.entitled -
+		                             VIO_CMO_MIN_ENT)));
+
+		vio_cmo.spare += tmp;
+		viodev->cmo.entitled -= tmp;
+		reserve_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Increase the reserve pool until the desired allocation is met.
+	 * Move an allocation freed from the excess pool into the reserve
+	 * pool and schedule a balance operation.
+	 */
+	if (excess_freed && (vio_cmo.desired > vio_cmo.reserve.size)) {
+		tmp = min(excess_freed, (vio_cmo.desired - vio_cmo.reserve.size));
+
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		excess_freed -= tmp;
+		balance = 1;
+	}
+
+	/* Return memory from the excess pool to that pool */
+	if (excess_freed)
+		vio_cmo.excess.free += excess_freed;
+
+	if (balance)
+		schedule_delayed_work(&vio_cmo.balance_q, VIO_CMO_BALANCE_DELAY);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_entitlement_update - Manage system entitlement changes
+ *
+ * @new_entitlement: new system entitlement to attempt to accommodate
+ *
+ * Increases in entitlement will be used to fulfill the spare entitlement
+ * and the rest is given to the excess pool.  Decreases, if they are
+ * possible, come from the excess pool and from unused device entitlement
+ *
+ * Returns: 0 on success, -ENOMEM when change can not be made
+ */
+int vio_cmo_entitlement_update(size_t new_entitlement)
+{
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail, delta, tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Entitlement increases */
+	if (new_entitlement > vio_cmo.entitled) {
+		delta = new_entitlement - vio_cmo.entitled;
+
+		/* Fulfill spare allocation */
+		if (vio_cmo.spare < VIO_CMO_MIN_ENT) {
+			tmp = min(delta, (VIO_CMO_MIN_ENT - vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			vio_cmo.reserve.size += tmp;
+			delta -= tmp;
+		}
+
+		/* Remaining new allocation goes to the excess pool */
+		vio_cmo.entitled += delta;
+		vio_cmo.excess.size += delta;
+		vio_cmo.excess.free += delta;
+
+		goto out;
+	}
+
+	/* Entitlement decreases */
+	delta = vio_cmo.entitled - new_entitlement;
+	avail = vio_cmo.excess.free;
+
+	/*
+	 * Need to check how much unused entitlement each device can
+	 * sacrifice to fulfill entitlement change.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		if (avail >= delta)
+			break;
+
+		viodev = dev_ent->viodev;
+		if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+		    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				avail += viodev->cmo.entitled -
+				         max_t(size_t, viodev->cmo.allocated,
+				               VIO_CMO_MIN_ENT);
+	}
+
+	if (delta <= avail) {
+		vio_cmo.entitled -= delta;
+
+		/* Take entitlement from the excess pool first */
+		tmp = min(vio_cmo.excess.free, delta);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.excess.free -= tmp;
+		delta -= tmp;
+
+		/*
+		 * Remove all but VIO_CMO_MIN_ENT bytes from devices
+		 * until entitlement change is served
+		 */
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			if (!delta)
+				break;
+
+			viodev = dev_ent->viodev;
+			tmp = 0;
+			if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+			    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				tmp = viodev->cmo.entitled -
+				      max_t(size_t, viodev->cmo.allocated,
+				            VIO_CMO_MIN_ENT);
+			viodev->cmo.entitled -= min(tmp, delta);
+			delta -= min(tmp, delta);
+		}
+	} else {
+		spin_unlock_irqrestore(&vio_cmo.lock, flags);
+		return -ENOMEM;
+	}
+
+out:
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_balance - Balance entitlement among devices
+ *
+ * @work: work queue structure for this operation
+ *
+ * Any system entitlement above the minimum needed for devices, or
+ * already allocated to devices, can be distributed to the devices.
+ * The list of devices is iterated through to recalculate the desired
+ * entitlement level and to determine how much entitlement above the
+ * minimum entitlement is allocated to devices.
+ *
+ * Small chunks of the available entitlement are given to devices until
+ * their requirements are fulfilled or there is no entitlement left to give.
+ * Upon completion sizes of the reserve and excess pools are calculated.
+ *
+ * The system minimum entitlement level is also recalculated here.
+ * Entitlement will be reserved for devices even after vio_bus_remove to
+ * accommodate reloading the driver.  The OF tree is walked to count the
+ * number of devices present and this will remove entitlement for devices
+ * that have actually left the system after having vio_bus_remove called.
+ */
+static void vio_cmo_balance(struct work_struct *work)
+{
+	struct vio_cmo *cmo;
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail = 0, level, chunk, need;
+	int devcount = 0, fulfilled;
+
+	cmo = container_of(work, struct vio_cmo, balance_q.work);
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Calculate minimum entitlement and fulfill spare */
+	cmo->min = vio_cmo_num_OF_devs() * VIO_CMO_MIN_ENT;
+	BUG_ON(cmo->min > cmo->entitled);
+	cmo->spare = min_t(size_t, VIO_CMO_MIN_ENT, (cmo->entitled - cmo->min));
+	cmo->min += cmo->spare;
+	cmo->desired = cmo->min;
+
+	/*
+	 * Determine how much entitlement is available and reset device
+	 * entitlements
+	 */
+	avail = cmo->entitled - cmo->spare;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		devcount++;
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		cmo->desired += (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+		avail -= max_t(size_t, viodev->cmo.allocated, VIO_CMO_MIN_ENT);
+	}
+
+	/*
+	 * Having provided each device with the minimum entitlement, loop
+	 * over the devices portioning out the remaining entitlement
+	 * until there is nothing left.
+	 */
+	level = VIO_CMO_MIN_ENT;
+	while (avail) {
+		fulfilled = 0;
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			viodev = dev_ent->viodev;
+
+			if (viodev->cmo.desired <= level) {
+				fulfilled++;
+				continue;
+			}
+
+			/*
+			 * Give the device up to VIO_CMO_BALANCE_CHUNK
+			 * bytes of entitlement, but do not exceed the
+			 * desired level of entitlement for the device.
+			 */
+			chunk = min_t(size_t, avail, VIO_CMO_BALANCE_CHUNK);
+			chunk = min(chunk, (viodev->cmo.desired -
+			                    viodev->cmo.entitled));
+			viodev->cmo.entitled += chunk;
+
+			/*
+			 * If the memory for this entitlement increase was
+			 * already allocated to the device it does not come
+			 * from the available pool being portioned out.
+			 */
+			need = max(viodev->cmo.allocated, viodev->cmo.entitled)-
+			       max(viodev->cmo.allocated, level);
+			avail -= need;
+
+		}
+		if (fulfilled == devcount)
+			break;
+		level += VIO_CMO_BALANCE_CHUNK;
+	}
+
+	/* Calculate new reserve and excess pool sizes */
+	cmo->reserve.size = cmo->min;
+	cmo->excess.free = 0;
+	cmo->excess.size = 0;
+	need = 0;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		/* Calculated reserve size above the minimum entitlement */
+		if (viodev->cmo.entitled)
+			cmo->reserve.size += (viodev->cmo.entitled -
+			                      VIO_CMO_MIN_ENT);
+		/* Calculated used excess entitlement */
+		if (viodev->cmo.allocated > viodev->cmo.entitled)
+			need += viodev->cmo.allocated - viodev->cmo.entitled;
+	}
+	cmo->excess.size = cmo->entitled - cmo->reserve.size;
+	cmo->excess.free = cmo->excess.size - need;
+
+	cancel_delayed_work(container_of(work, struct delayed_work, work));
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size,
+                                          dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	void *ret;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return NULL;
+	}
+
+	ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag);
+	if (unlikely(ret == NULL)) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_free_coherent(struct device *dev, size_t size,
+                                        void *vaddr, dma_addr_t dma_handle)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr,
+                                           size_t size,
+                                           enum dma_data_direction direction,
+                                           struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	dma_addr_t ret = DMA_ERROR_CODE;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return ret;
+	}
+
+	ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs);
+	if (unlikely(dma_mapping_error(ret))) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_single(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.unmap_single(dev, dma_handle, size, direction, attrs);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
+                                int nelems, enum dma_data_direction direction,
+                                struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	int ret, count = 0;
+	size_t alloc_size = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE);
+
+	if (vio_cmo_alloc(viodev, alloc_size)) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return 0;
+	}
+
+	ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs);
+
+	if (unlikely(!ret)) {
+		vio_cmo_dealloc(viodev, alloc_size);
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	for (sgl = sglist, count = 0; count < ret; count++, sgl++)
+		alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+	if (alloc_size)
+		vio_cmo_dealloc(viodev, alloc_size);
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_sg(struct device *dev,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	size_t alloc_size = 0;
+	int count = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+
+	dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs);
+
+	vio_cmo_dealloc(viodev, alloc_size);
+}
+
+struct dma_mapping_ops vio_dma_mapping_ops = {
+	.alloc_coherent = vio_dma_iommu_alloc_coherent,
+	.free_coherent  = vio_dma_iommu_free_coherent,
+	.map_single     = vio_dma_iommu_map_single,
+	.unmap_single   = vio_dma_iommu_unmap_single,
+	.map_sg         = vio_dma_iommu_map_sg,
+	.unmap_sg       = vio_dma_iommu_unmap_sg,
+};
+
+/**
+ * vio_cmo_set_dev_desired - Set desired entitlement for a device
+ *
+ * @viodev: struct vio_dev for device to alter
+ * @new_desired: new desired entitlement level in bytes
+ *
+ * For use by devices to request a change to their entitlement at runtime or
+ * through sysfs.  The desired entitlement level is changed and a balancing
+ * of system resources is scheduled to run in the future.
+ */
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired)
+{
+	unsigned long flags;
+	struct vio_cmo_dev_entry *dev_ent;
+	int found = 0;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (desired < VIO_CMO_MIN_ENT)
+		desired = VIO_CMO_MIN_ENT;
+
+	/*
+	 * Changes will not be made for devices not in the device list.
+	 * If it is not in the device list, then no driver is loaded
+	 * for the device and it can not receive entitlement.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			found = 1;
+			break;
+		}
+	if (!found)
+		return;
+
+	/* Increase/decrease in desired device entitlement */
+	if (desired >= viodev->cmo.desired) {
+		/* Just bump the bus and device values prior to a balance*/
+		vio_cmo.desired += desired - viodev->cmo.desired;
+		viodev->cmo.desired = desired;
+	} else {
+		/* Decrease bus and device values for desired entitlement */
+		vio_cmo.desired -= viodev->cmo.desired - desired;
+		viodev->cmo.desired = desired;
+		/*
+		 * If less entitlement is desired than current entitlement, move
+		 * any reserve memory in the change region to the excess pool.
+		 */
+		if (viodev->cmo.entitled > desired) {
+			vio_cmo.reserve.size -= viodev->cmo.entitled - desired;
+			vio_cmo.excess.size += viodev->cmo.entitled - desired;
+			/*
+			 * If entitlement moving from the reserve pool to the
+			 * excess pool is currently unused, add to the excess
+			 * free counter.
+			 */
+			if (viodev->cmo.allocated < viodev->cmo.entitled)
+				vio_cmo.excess.free += viodev->cmo.entitled -
+				                       max(viodev->cmo.allocated, desired);
+			viodev->cmo.entitled = desired;
+		}
+	}
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_bus_probe - Handle CMO specific bus probe activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Determine the devices IO memory entitlement needs, attempting
+ * to satisfy the system minimum entitlement at first and scheduling
+ * a balance operation to take care of the rest at a later time.
+ *
+ * Returns: 0 on success, -EINVAL when device doesn't support CMO, and
+ *          -ENOMEM when entitlement is not available for device or
+ *          device entry.
+ *
+ */
+static int vio_cmo_bus_probe(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	struct device *dev = &viodev->dev;
+	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	unsigned long flags;
+	size_t size;
+
+	/*
+	 * Check to see that device has a DMA window and configure
+	 * entitlement for the device.
+	 */
+	if (of_get_property(viodev->dev.archdata.of_node,
+	                    "ibm,my-dma-window", NULL)) {
+		/* Check that the driver is CMO enabled and get desired DMA */
+		if (!viodrv->get_desired_dma) {
+			dev_err(dev, "%s: device driver does not support CMO\n",
+			        __func__);
+			return -EINVAL;
+		}
+
+		viodev->cmo.desired = IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev));
+		if (viodev->cmo.desired < VIO_CMO_MIN_ENT)
+			viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		size = VIO_CMO_MIN_ENT;
+
+		dev_ent = kmalloc(sizeof(struct vio_cmo_dev_entry),
+		                  GFP_KERNEL);
+		if (!dev_ent)
+			return -ENOMEM;
+
+		dev_ent->viodev = viodev;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+		list_add(&dev_ent->list, &vio_cmo.device_list);
+	} else {
+		viodev->cmo.desired = 0;
+		size = 0;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+	}
+
+	/*
+	 * If the needs for vio_cmo.min have not changed since they
+	 * were last set, the number of devices in the OF tree has
+	 * been constant and the IO memory for this is already in
+	 * the reserve pool.
+	 */
+	if (vio_cmo.min == ((vio_cmo_num_OF_devs() + 1) *
+	                    VIO_CMO_MIN_ENT)) {
+		/* Updated desired entitlement if device requires it */
+		if (size)
+			vio_cmo.desired += (viodev->cmo.desired -
+		                        VIO_CMO_MIN_ENT);
+	} else {
+		size_t tmp;
+
+		tmp = vio_cmo.spare + vio_cmo.excess.free;
+		if (tmp < size) {
+			dev_err(dev, "%s: insufficient free "
+			        "entitlement to add device. "
+			        "Need %lu, have %lu\n", __func__,
+				size, (vio_cmo.spare + tmp));
+			spin_unlock_irqrestore(&vio_cmo.lock, flags);
+			return -ENOMEM;
+		}
+
+		/* Use excess pool first to fulfill request */
+		tmp = min(size, vio_cmo.excess.free);
+		vio_cmo.excess.free -= tmp;
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+
+		/* Use spare if excess pool was insufficient */
+		vio_cmo.spare -= size - tmp;
+
+		/* Update bus accounting */
+		vio_cmo.min += size;
+		vio_cmo.desired += viodev->cmo.desired;
+	}
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_bus_remove - Handle CMO specific bus removal activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Remove the device from the cmo device list.  The minimum entitlement
+ * will be reserved for the device as long as it is in the system.  The
+ * rest of the entitlement the device had been allocated will be returned
+ * to the system.
+ */
+static void vio_cmo_bus_remove(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (viodev->cmo.allocated) {
+		dev_err(&viodev->dev, "%s: device had %lu bytes of IO "
+		        "allocated after remove operation.\n",
+		        __func__, viodev->cmo.allocated);
+		BUG();
+	}
+
+	/*
+	 * Remove the device from the device list being maintained for
+	 * CMO enabled devices.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			list_del(&dev_ent->list);
+			kfree(dev_ent);
+			break;
+		}
+
+	/*
+	 * Devices may not require any entitlement and they do not need
+	 * to be processed.  Otherwise, return the device's entitlement
+	 * back to the pools.
+	 */
+	if (viodev->cmo.entitled) {
+		/*
+		 * This device has not yet left the OF tree, it's
+		 * minimum entitlement remains in vio_cmo.min and
+		 * vio_cmo.desired
+		 */
+		vio_cmo.desired -= (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+
+		/*
+		 * Save min allocation for device in reserve as long
+		 * as it exists in OF tree as determined by later
+		 * balance operation
+		 */
+		viodev->cmo.entitled -= VIO_CMO_MIN_ENT;
+
+		/* Replenish spare from freed reserve pool */
+		if (viodev->cmo.entitled && (vio_cmo.spare < VIO_CMO_MIN_ENT)) {
+			tmp = min(viodev->cmo.entitled, (VIO_CMO_MIN_ENT -
+			                                 vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			viodev->cmo.entitled -= tmp;
+		}
+
+		/* Remaining reserve goes to excess pool */
+		vio_cmo.excess.size += viodev->cmo.entitled;
+		vio_cmo.excess.free += viodev->cmo.entitled;
+		vio_cmo.reserve.size -= viodev->cmo.entitled;
+
+		/*
+		 * Until the device is removed it will keep a
+		 * minimum entitlement; this will guarantee that
+		 * a module unload/load will result in a success.
+		 */
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		atomic_set(&viodev->cmo.allocs_failed, 0);
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev)
+{
+	vio_dma_mapping_ops.dma_supported = dma_iommu_ops.dma_supported;
+	viodev->dev.archdata.dma_ops = &vio_dma_mapping_ops;
+}
+
+/**
+ * vio_cmo_bus_init - CMO entitlement initialization at bus init time
+ *
+ * Set up the reserve and excess entitlement pools based on available
+ * system entitlement and the number of devices in the OF tree that
+ * require entitlement in the reserve pool.
+ */
+static void vio_cmo_bus_init(void)
+{
+	struct hvcall_mpp_data mpp_data;
+	int err;
+
+	memset(&vio_cmo, 0, sizeof(struct vio_cmo));
+	spin_lock_init(&vio_cmo.lock);
+	INIT_LIST_HEAD(&vio_cmo.device_list);
+	INIT_DELAYED_WORK(&vio_cmo.balance_q, vio_cmo_balance);
+
+	/* Get current system entitlement */
+	err = h_get_mpp(&mpp_data);
+
+	/*
+	 * On failure, continue with entitlement set to 0, will panic()
+	 * later when spare is reserved.
+	 */
+	if (err != H_SUCCESS) {
+		printk(KERN_ERR "%s: unable to determine system IO "\
+		       "entitlement. (%d)\n", __func__, err);
+		vio_cmo.entitled = 0;
+	} else {
+		vio_cmo.entitled = mpp_data.entitled_mem;
+	}
+
+	/* Set reservation and check against entitlement */
+	vio_cmo.spare = VIO_CMO_MIN_ENT;
+	vio_cmo.reserve.size = vio_cmo.spare;
+	vio_cmo.reserve.size += (vio_cmo_num_OF_devs() *
+	                         VIO_CMO_MIN_ENT);
+	if (vio_cmo.reserve.size > vio_cmo.entitled) {
+		printk(KERN_ERR "%s: insufficient system entitlement\n",
+		       __func__);
+		panic("%s: Insufficient system entitlement", __func__);
+	}
+
+	/* Set the remaining accounting variables */
+	vio_cmo.excess.size = vio_cmo.entitled - vio_cmo.reserve.size;
+	vio_cmo.excess.free = vio_cmo.excess.size;
+	vio_cmo.min = vio_cmo.reserve.size;
+	vio_cmo.desired = vio_cmo.reserve.size;
+}
+
+/* sysfs device functions and data structures for CMO */
+
+#define viodev_cmo_rd_attr(name)                                        \
+static ssize_t viodev_cmo_##name##_show(struct device *dev,             \
+                                        struct device_attribute *attr,  \
+                                         char *buf)                     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", to_vio_dev(dev)->cmo.name);        \
+}
+
+static ssize_t viodev_cmo_allocs_failed_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	return sprintf(buf, "%d\n", atomic_read(&viodev->cmo.allocs_failed));
+}
+
+static ssize_t viodev_cmo_allocs_failed_reset(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	atomic_set(&viodev->cmo.allocs_failed, 0);
+	return count;
+}
+
+static ssize_t viodev_cmo_desired_set(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	size_t new_desired;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &new_desired);
+	if (ret)
+		return ret;
+
+	vio_cmo_set_dev_desired(viodev, new_desired);
+	return count;
+}
+
+viodev_cmo_rd_attr(desired);
+viodev_cmo_rd_attr(entitled);
+viodev_cmo_rd_attr(allocated);
+
+static ssize_t name_show(struct device *, struct device_attribute *, char *);
+static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
+static struct device_attribute vio_cmo_dev_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_RO(devspec),
+	__ATTR(cmo_desired,       S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_desired_show, viodev_cmo_desired_set),
+	__ATTR(cmo_entitled,      S_IRUGO, viodev_cmo_entitled_show,      NULL),
+	__ATTR(cmo_allocated,     S_IRUGO, viodev_cmo_allocated_show,     NULL),
+	__ATTR(cmo_allocs_failed, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_allocs_failed_show, viodev_cmo_allocs_failed_reset),
+	__ATTR_NULL
+};
+
+/* sysfs bus functions and data structures for CMO */
+
+#define viobus_cmo_rd_attr(name)                                        \
+static ssize_t                                                          \
+viobus_cmo_##name##_show(struct bus_type *bt, char *buf)                \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name);                     \
+}
+
+#define viobus_cmo_pool_rd_attr(name, var)                              \
+static ssize_t                                                          \
+viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf)     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name.var);                 \
+}
+
+static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf,
+                                     size_t count)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.high = vio_cmo.curr;
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+
+	return count;
+}
+
+viobus_cmo_rd_attr(entitled);
+viobus_cmo_pool_rd_attr(reserve, size);
+viobus_cmo_pool_rd_attr(excess, size);
+viobus_cmo_pool_rd_attr(excess, free);
+viobus_cmo_rd_attr(spare);
+viobus_cmo_rd_attr(min);
+viobus_cmo_rd_attr(desired);
+viobus_cmo_rd_attr(curr);
+viobus_cmo_rd_attr(high);
+
+static struct bus_attribute vio_cmo_bus_attrs[] = {
+	__ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL),
+	__ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL),
+	__ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL),
+	__ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL),
+	__ATTR(cmo_spare,   S_IRUGO, viobus_cmo_spare_show,   NULL),
+	__ATTR(cmo_min,     S_IRUGO, viobus_cmo_min_show,     NULL),
+	__ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL),
+	__ATTR(cmo_curr,    S_IRUGO, viobus_cmo_curr_show,    NULL),
+	__ATTR(cmo_high,    S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viobus_cmo_high_show, viobus_cmo_high_reset),
+	__ATTR_NULL
+};
+
+static void vio_cmo_sysfs_init(void)
+{
+	vio_bus_type.dev_attrs = vio_cmo_dev_attrs;
+	vio_bus_type.bus_attrs = vio_cmo_bus_attrs;
+}
+#else /* CONFIG_PPC_SMLPAR */
+/* Dummy functions for iSeries platform */
+int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; }
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {}
+static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; }
+static void vio_cmo_bus_remove(struct vio_dev *viodev) {}
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {}
+static void vio_cmo_bus_init() {}
+static void vio_cmo_sysfs_init() { }
+#endif /* CONFIG_PPC_SMLPAR */
+EXPORT_SYMBOL(vio_cmo_entitlement_update);
+EXPORT_SYMBOL(vio_cmo_set_dev_desired);
+
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
 	const unsigned char *dma_window;
@@ -114,8 +1105,17 @@ static int vio_bus_probe(struct device *dev)
 		return error;
 
 	id = vio_match_device(viodrv->id_table, viodev);
-	if (id)
+	if (id) {
+		memset(&viodev->cmo, 0, sizeof(viodev->cmo));
+		if (firmware_has_feature(FW_FEATURE_CMO)) {
+			error = vio_cmo_bus_probe(viodev);
+			if (error)
+				return error;
+		}
 		error = viodrv->probe(viodev, id);
+		if (error)
+			vio_cmo_bus_remove(viodev);
+	}
 
 	return error;
 }
@@ -125,12 +1125,23 @@ static int vio_bus_remove(struct device *dev)
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
 	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	struct device *devptr;
+	int ret = 1;
+
+	/*
+	 * Hold a reference to the device after the remove function is called
+	 * to allow for CMO accounting cleanup for the device.
+	 */
+	devptr = get_device(dev);
 
 	if (viodrv->remove)
-		return viodrv->remove(viodev);
+		ret = viodrv->remove(viodev);
+
+	if (!ret && firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_remove(viodev);
 
-	/* driver can't remove */
-	return 1;
+	put_device(devptr);
+	return ret;
 }
 
 /**
@@ -215,7 +1226,11 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 			viodev->unit_address = *unit_address;
 	}
 	viodev->dev.archdata.of_node = of_node_get(of_node);
-	viodev->dev.archdata.dma_ops = &dma_iommu_ops;
+
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_set_dma_ops(viodev);
+	else
+		viodev->dev.archdata.dma_ops = &dma_iommu_ops;
 	viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
 	viodev->dev.archdata.numa_node = of_node_to_nid(of_node);
 
@@ -245,6 +1260,9 @@ static int __init vio_bus_init(void)
 	int err;
 	struct device_node *node_vroot;
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_sysfs_init();
+
 	err = bus_register(&vio_bus_type);
 	if (err) {
 		printk(KERN_ERR "failed to register VIO bus\n");
@@ -262,6 +1280,9 @@ static int __init vio_bus_init(void)
 		return err;
 	}
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_init();
+
 	node_vroot = of_find_node_by_name(NULL, "vdevice");
 	if (node_vroot) {
 		struct device_node *of_node;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 0c3000bf8d75..4a8ce62fe112 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -9,6 +9,25 @@
 
 ENTRY(_stext)
 
+PHDRS {
+	kernel PT_LOAD FLAGS(7); /* RWX */
+	notes PT_NOTE FLAGS(0);
+	dummy PT_NOTE FLAGS(0);
+
+	/* binutils < 2.18 has a bug that makes it misbehave when taking an
+	   ELF file with all segments at load address 0 as input.  This
+	   happens when running "strip" on vmlinux, because of the AT() magic
+	   in this linker script.  People using GCC >= 4.2 won't run into
+	   this problem, because the "build-id" support will put some data
+	   into the "notes" segment (at a non-zero load address).
+
+	   To work around this, we force some data into both the "dummy"
+	   segment and the kernel segment, so the dummy segment will get a
+	   non-zero load address.  It's not enough to always create the
+	   "notes" segment, since if nothing gets assigned to it, its load
+	   address will be zero.  */
+}
+
 #ifdef CONFIG_PPC64
 OUTPUT_ARCH(powerpc:common64)
 jiffies = jiffies_64;
@@ -35,7 +54,7 @@ SECTIONS
 		ALIGN_FUNCTION();
 		*(.text.head)
 		_text = .;
-		*(.text .fixup .text.init.refok .exit.text.refok)
+		*(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
@@ -50,7 +69,7 @@ SECTIONS
 		. = ALIGN(PAGE_SIZE);
 		_etext = .;
 		PROVIDE32 (etext = .);
-	}
+	} :kernel
 
 	/* Read-only data */
 	RODATA
@@ -62,9 +81,13 @@ SECTIONS
 		__stop___ex_table = .;
 	}
 
-	NOTES
+	NOTES :kernel :notes
 
-	BUG_TABLE
+	/* The dummy segment contents for the bug workaround mentioned above
+	   near PHDRS.  */
+	.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
+		LONG(0xf177)
+	} :kernel :dummy
 
 /*
  * Init sections discarded at runtime
@@ -76,7 +99,7 @@ SECTIONS
 		_sinittext = .;
 		INIT_TEXT
 		_einittext = .;
-	}
+	} :kernel
 
 	/* .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
@@ -127,6 +150,12 @@ SECTIONS
 		*(__ftr_fixup)
 		__stop___ftr_fixup = .;
 	}
+	. = ALIGN(8);
+	__lwsync_fixup : AT(ADDR(__lwsync_fixup) - LOAD_OFFSET) {
+		__start___lwsync_fixup = .;
+		*(__lwsync_fixup)
+		__stop___lwsync_fixup = .;
+	}
 #ifdef CONFIG_PPC64
 	. = ALIGN(8);
 	__fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index d0d358d367ec..04e3449e1f42 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -4,7 +4,7 @@
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
 
 kvm-objs := $(common-objs) powerpc.o emulate.o booke_guest.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 777e0f34e0ea..53826a5f6c06 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -145,6 +145,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_USER_MEMORY:
 		r = 1;
 		break;
+	case KVM_CAP_COALESCED_MMIO:
+		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+		break;
 	default:
 		r = 0;
 		break;
@@ -167,6 +170,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
+
 struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 {
 	struct kvm_vcpu *vcpu;
@@ -240,10 +247,6 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
 }
 
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
                                     struct kvm_debug_guest *dbg)
 {
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index e522b06cc42f..2a88e8b9a3c6 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -24,3 +24,7 @@ obj-$(CONFIG_SMP)	+= locks.o
 endif
 
 obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
+
+obj-y			+= code-patching.o
+obj-y			+= feature-fixups.o
+obj-$(CONFIG_FTR_FIXUP_SELFTEST) += feature-fixups-test.o
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
new file mode 100644
index 000000000000..7c975d43e3f3
--- /dev/null
+++ b/arch/powerpc/lib/code-patching.c
@@ -0,0 +1,449 @@
+/*
+ *  Copyright 2008 Michael Ellerman, IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/page.h>
+#include <asm/code-patching.h>
+
+
+void patch_instruction(unsigned int *addr, unsigned int instr)
+{
+	*addr = instr;
+	asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr));
+}
+
+void patch_branch(unsigned int *addr, unsigned long target, int flags)
+{
+	patch_instruction(addr, create_branch(addr, target, flags));
+}
+
+unsigned int create_branch(const unsigned int *addr,
+			   unsigned long target, int flags)
+{
+	unsigned int instruction;
+	long offset;
+
+	offset = target;
+	if (! (flags & BRANCH_ABSOLUTE))
+		offset = offset - (unsigned long)addr;
+
+	/* Check we can represent the target in the instruction format */
+	if (offset < -0x2000000 || offset > 0x1fffffc || offset & 0x3)
+		return 0;
+
+	/* Mask out the flags and target, so they don't step on each other. */
+	instruction = 0x48000000 | (flags & 0x3) | (offset & 0x03FFFFFC);
+
+	return instruction;
+}
+
+unsigned int create_cond_branch(const unsigned int *addr,
+				unsigned long target, int flags)
+{
+	unsigned int instruction;
+	long offset;
+
+	offset = target;
+	if (! (flags & BRANCH_ABSOLUTE))
+		offset = offset - (unsigned long)addr;
+
+	/* Check we can represent the target in the instruction format */
+	if (offset < -0x8000 || offset > 0x7FFF || offset & 0x3)
+		return 0;
+
+	/* Mask out the flags and target, so they don't step on each other. */
+	instruction = 0x40000000 | (flags & 0x3FF0003) | (offset & 0xFFFC);
+
+	return instruction;
+}
+
+static unsigned int branch_opcode(unsigned int instr)
+{
+	return (instr >> 26) & 0x3F;
+}
+
+static int instr_is_branch_iform(unsigned int instr)
+{
+	return branch_opcode(instr) == 18;
+}
+
+static int instr_is_branch_bform(unsigned int instr)
+{
+	return branch_opcode(instr) == 16;
+}
+
+int instr_is_relative_branch(unsigned int instr)
+{
+	if (instr & BRANCH_ABSOLUTE)
+		return 0;
+
+	return instr_is_branch_iform(instr) || instr_is_branch_bform(instr);
+}
+
+static unsigned long branch_iform_target(const unsigned int *instr)
+{
+	signed long imm;
+
+	imm = *instr & 0x3FFFFFC;
+
+	/* If the top bit of the immediate value is set this is negative */
+	if (imm & 0x2000000)
+		imm -= 0x4000000;
+
+	if ((*instr & BRANCH_ABSOLUTE) == 0)
+		imm += (unsigned long)instr;
+
+	return (unsigned long)imm;
+}
+
+static unsigned long branch_bform_target(const unsigned int *instr)
+{
+	signed long imm;
+
+	imm = *instr & 0xFFFC;
+
+	/* If the top bit of the immediate value is set this is negative */
+	if (imm & 0x8000)
+		imm -= 0x10000;
+
+	if ((*instr & BRANCH_ABSOLUTE) == 0)
+		imm += (unsigned long)instr;
+
+	return (unsigned long)imm;
+}
+
+unsigned long branch_target(const unsigned int *instr)
+{
+	if (instr_is_branch_iform(*instr))
+		return branch_iform_target(instr);
+	else if (instr_is_branch_bform(*instr))
+		return branch_bform_target(instr);
+
+	return 0;
+}
+
+int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr)
+{
+	if (instr_is_branch_iform(*instr) || instr_is_branch_bform(*instr))
+		return branch_target(instr) == addr;
+
+	return 0;
+}
+
+unsigned int translate_branch(const unsigned int *dest, const unsigned int *src)
+{
+	unsigned long target;
+
+	target = branch_target(src);
+
+	if (instr_is_branch_iform(*src))
+		return create_branch(dest, target, *src);
+	else if (instr_is_branch_bform(*src))
+		return create_cond_branch(dest, target, *src);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_CODE_PATCHING_SELFTEST
+
+static void __init test_trampoline(void)
+{
+	asm ("nop;\n");
+}
+
+#define check(x)	\
+	if (!(x)) printk("code-patching: test failed at line %d\n", __LINE__);
+
+static void __init test_branch_iform(void)
+{
+	unsigned int instr;
+	unsigned long addr;
+
+	addr = (unsigned long)&instr;
+
+	/* The simplest case, branch to self, no flags */
+	check(instr_is_branch_iform(0x48000000));
+	/* All bits of target set, and flags */
+	check(instr_is_branch_iform(0x4bffffff));
+	/* High bit of opcode set, which is wrong */
+	check(!instr_is_branch_iform(0xcbffffff));
+	/* Middle bits of opcode set, which is wrong */
+	check(!instr_is_branch_iform(0x7bffffff));
+
+	/* Simplest case, branch to self with link */
+	check(instr_is_branch_iform(0x48000001));
+	/* All bits of targets set */
+	check(instr_is_branch_iform(0x4bfffffd));
+	/* Some bits of targets set */
+	check(instr_is_branch_iform(0x4bff00fd));
+	/* Must be a valid branch to start with */
+	check(!instr_is_branch_iform(0x7bfffffd));
+
+	/* Absolute branch to 0x100 */
+	instr = 0x48000103;
+	check(instr_is_branch_to_addr(&instr, 0x100));
+	/* Absolute branch to 0x420fc */
+	instr = 0x480420ff;
+	check(instr_is_branch_to_addr(&instr, 0x420fc));
+	/* Maximum positive relative branch, + 20MB - 4B */
+	instr = 0x49fffffc;
+	check(instr_is_branch_to_addr(&instr, addr + 0x1FFFFFC));
+	/* Smallest negative relative branch, - 4B */
+	instr = 0x4bfffffc;
+	check(instr_is_branch_to_addr(&instr, addr - 4));
+	/* Largest negative relative branch, - 32 MB */
+	instr = 0x4a000000;
+	check(instr_is_branch_to_addr(&instr, addr - 0x2000000));
+
+	/* Branch to self, with link */
+	instr = create_branch(&instr, addr, BRANCH_SET_LINK);
+	check(instr_is_branch_to_addr(&instr, addr));
+
+	/* Branch to self - 0x100, with link */
+	instr = create_branch(&instr, addr - 0x100, BRANCH_SET_LINK);
+	check(instr_is_branch_to_addr(&instr, addr - 0x100));
+
+	/* Branch to self + 0x100, no link */
+	instr = create_branch(&instr, addr + 0x100, 0);
+	check(instr_is_branch_to_addr(&instr, addr + 0x100));
+
+	/* Maximum relative negative offset, - 32 MB */
+	instr = create_branch(&instr, addr - 0x2000000, BRANCH_SET_LINK);
+	check(instr_is_branch_to_addr(&instr, addr - 0x2000000));
+
+	/* Out of range relative negative offset, - 32 MB + 4*/
+	instr = create_branch(&instr, addr - 0x2000004, BRANCH_SET_LINK);
+	check(instr == 0);
+
+	/* Out of range relative positive offset, + 32 MB */
+	instr = create_branch(&instr, addr + 0x2000000, BRANCH_SET_LINK);
+	check(instr == 0);
+
+	/* Unaligned target */
+	instr = create_branch(&instr, addr + 3, BRANCH_SET_LINK);
+	check(instr == 0);
+
+	/* Check flags are masked correctly */
+	instr = create_branch(&instr, addr, 0xFFFFFFFC);
+	check(instr_is_branch_to_addr(&instr, addr));
+	check(instr == 0x48000000);
+}
+
+static void __init test_create_function_call(void)
+{
+	unsigned int *iptr;
+	unsigned long dest;
+
+	/* Check we can create a function call */
+	iptr = (unsigned int *)ppc_function_entry(test_trampoline);
+	dest = ppc_function_entry(test_create_function_call);
+	patch_instruction(iptr, create_branch(iptr, dest, BRANCH_SET_LINK));
+	check(instr_is_branch_to_addr(iptr, dest));
+}
+
+static void __init test_branch_bform(void)
+{
+	unsigned long addr;
+	unsigned int *iptr, instr, flags;
+
+	iptr = &instr;
+	addr = (unsigned long)iptr;
+
+	/* The simplest case, branch to self, no flags */
+	check(instr_is_branch_bform(0x40000000));
+	/* All bits of target set, and flags */
+	check(instr_is_branch_bform(0x43ffffff));
+	/* High bit of opcode set, which is wrong */
+	check(!instr_is_branch_bform(0xc3ffffff));
+	/* Middle bits of opcode set, which is wrong */
+	check(!instr_is_branch_bform(0x7bffffff));
+
+	/* Absolute conditional branch to 0x100 */
+	instr = 0x43ff0103;
+	check(instr_is_branch_to_addr(&instr, 0x100));
+	/* Absolute conditional branch to 0x20fc */
+	instr = 0x43ff20ff;
+	check(instr_is_branch_to_addr(&instr, 0x20fc));
+	/* Maximum positive relative conditional branch, + 32 KB - 4B */
+	instr = 0x43ff7ffc;
+	check(instr_is_branch_to_addr(&instr, addr + 0x7FFC));
+	/* Smallest negative relative conditional branch, - 4B */
+	instr = 0x43fffffc;
+	check(instr_is_branch_to_addr(&instr, addr - 4));
+	/* Largest negative relative conditional branch, - 32 KB */
+	instr = 0x43ff8000;
+	check(instr_is_branch_to_addr(&instr, addr - 0x8000));
+
+	/* All condition code bits set & link */
+	flags = 0x3ff000 | BRANCH_SET_LINK;
+
+	/* Branch to self */
+	instr = create_cond_branch(iptr, addr, flags);
+	check(instr_is_branch_to_addr(&instr, addr));
+
+	/* Branch to self - 0x100 */
+	instr = create_cond_branch(iptr, addr - 0x100, flags);
+	check(instr_is_branch_to_addr(&instr, addr - 0x100));
+
+	/* Branch to self + 0x100 */
+	instr = create_cond_branch(iptr, addr + 0x100, flags);
+	check(instr_is_branch_to_addr(&instr, addr + 0x100));
+
+	/* Maximum relative negative offset, - 32 KB */
+	instr = create_cond_branch(iptr, addr - 0x8000, flags);
+	check(instr_is_branch_to_addr(&instr, addr - 0x8000));
+
+	/* Out of range relative negative offset, - 32 KB + 4*/
+	instr = create_cond_branch(iptr, addr - 0x8004, flags);
+	check(instr == 0);
+
+	/* Out of range relative positive offset, + 32 KB */
+	instr = create_cond_branch(iptr, addr + 0x8000, flags);
+	check(instr == 0);
+
+	/* Unaligned target */
+	instr = create_cond_branch(iptr, addr + 3, flags);
+	check(instr == 0);
+
+	/* Check flags are masked correctly */
+	instr = create_cond_branch(iptr, addr, 0xFFFFFFFC);
+	check(instr_is_branch_to_addr(&instr, addr));
+	check(instr == 0x43FF0000);
+}
+
+static void __init test_translate_branch(void)
+{
+	unsigned long addr;
+	unsigned int *p, *q;
+	void *buf;
+
+	buf = vmalloc(PAGE_ALIGN(0x2000000 + 1));
+	check(buf);
+	if (!buf)
+		return;
+
+	/* Simple case, branch to self moved a little */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_branch(p, addr, 0);
+	check(instr_is_branch_to_addr(p, addr));
+	q = p + 1;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Maximum negative case, move b . to addr + 32 MB */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_branch(p, addr, 0);
+	q = buf + 0x2000000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x4a000000);
+
+	/* Maximum positive case, move x to x - 32 MB + 4 */
+	p = buf + 0x2000000;
+	addr = (unsigned long)p;
+	patch_branch(p, addr, 0);
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x49fffffc);
+
+	/* Jump to x + 16 MB moved to x + 20 MB */
+	p = buf;
+	addr = 0x1000000 + (unsigned long)buf;
+	patch_branch(p, addr, BRANCH_SET_LINK);
+	q = buf + 0x1400000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Jump to x + 16 MB moved to x - 16 MB + 4 */
+	p = buf + 0x1000000;
+	addr = 0x2000000 + (unsigned long)buf;
+	patch_branch(p, addr, 0);
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+
+	/* Conditional branch tests */
+
+	/* Simple case, branch to self moved a little */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_instruction(p, create_cond_branch(p, addr, 0));
+	check(instr_is_branch_to_addr(p, addr));
+	q = p + 1;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Maximum negative case, move b . to addr + 32 KB */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_instruction(p, create_cond_branch(p, addr, 0xFFFFFFFC));
+	q = buf + 0x8000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x43ff8000);
+
+	/* Maximum positive case, move x to x - 32 KB + 4 */
+	p = buf + 0x8000;
+	addr = (unsigned long)p;
+	patch_instruction(p, create_cond_branch(p, addr, 0xFFFFFFFC));
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x43ff7ffc);
+
+	/* Jump to x + 12 KB moved to x + 20 KB */
+	p = buf;
+	addr = 0x3000 + (unsigned long)buf;
+	patch_instruction(p, create_cond_branch(p, addr, BRANCH_SET_LINK));
+	q = buf + 0x5000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Jump to x + 8 KB moved to x - 8 KB + 4 */
+	p = buf + 0x2000;
+	addr = 0x4000 + (unsigned long)buf;
+	patch_instruction(p, create_cond_branch(p, addr, 0));
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Free the buffer we were using */
+	vfree(buf);
+}
+
+static int __init test_code_patching(void)
+{
+	printk(KERN_DEBUG "Running code patching self-tests ...\n");
+
+	test_branch_iform();
+	test_branch_bform();
+	test_create_function_call();
+	test_translate_branch();
+
+	return 0;
+}
+late_initcall(test_code_patching);
+
+#endif /* CONFIG_CODE_PATCHING_SELFTEST */
diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c
index 6656d47841d0..5d83907f6591 100644
--- a/arch/powerpc/lib/dma-noncoherent.c
+++ b/arch/powerpc/lib/dma-noncoherent.c
@@ -348,8 +348,15 @@ void __dma_sync(void *vaddr, size_t size, int direction)
 	switch (direction) {
 	case DMA_NONE:
 		BUG();
-	case DMA_FROM_DEVICE:	/* invalidate only */
-		invalidate_dcache_range(start, end);
+	case DMA_FROM_DEVICE:
+		/*
+		 * invalidate only when cache-line aligned otherwise there is
+		 * the potential for discarding uncommitted data from the cache
+		 */
+		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+			flush_dcache_range(start, end);
+		else
+			invalidate_dcache_range(start, end);
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
 		clean_dcache_range(start, end);
diff --git a/arch/powerpc/lib/feature-fixups-test.S b/arch/powerpc/lib/feature-fixups-test.S
new file mode 100644
index 000000000000..cb737484c5aa
--- /dev/null
+++ b/arch/powerpc/lib/feature-fixups-test.S
@@ -0,0 +1,742 @@
+/*
+ * Copyright 2008 Michael Ellerman, IBM Corporation.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/feature-fixups.h>
+#include <asm/ppc_asm.h>
+#include <asm/synch.h>
+
+	.text
+
+#define globl(x)		\
+	.globl x;	\
+x:
+
+globl(ftr_fixup_test1)
+	or	1,1,1
+	or	2,2,2	/* fixup will nop out this instruction */
+	or	3,3,3
+
+globl(end_ftr_fixup_test1)
+
+globl(ftr_fixup_test1_orig)
+	or	1,1,1
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test1_expected)
+	or	1,1,1
+	nop
+	or	3,3,3
+
+globl(ftr_fixup_test2)
+	or	1,1,1
+	or	2,2,2	/* fixup will replace this with ftr_fixup_test2_alt */
+	or	3,3,3
+
+globl(end_ftr_fixup_test2)
+
+globl(ftr_fixup_test2_orig)
+	or	1,1,1
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test2_alt)
+	or	31,31,31
+
+globl(ftr_fixup_test2_expected)
+	or	1,1,1
+	or	31,31,31
+	or	3,3,3
+
+globl(ftr_fixup_test3)
+	or	1,1,1
+	or	2,2,2	/* fixup will fail to replace this */
+	or	3,3,3
+
+globl(end_ftr_fixup_test3)
+
+globl(ftr_fixup_test3_orig)
+	or	1,1,1
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test3_alt)
+	or	31,31,31
+	or	31,31,31
+
+globl(ftr_fixup_test4)
+	or	1,1,1
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	3,3,3
+
+globl(end_ftr_fixup_test4)
+
+globl(ftr_fixup_test4_expected)
+	or	1,1,1
+	or	31,31,31
+	or	31,31,31
+	nop
+	nop
+	or	3,3,3
+
+globl(ftr_fixup_test4_orig)
+	or	1,1,1
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test4_alt)
+	or	31,31,31
+	or	31,31,31
+
+
+globl(ftr_fixup_test5)
+	or	1,1,1
+BEGIN_FTR_SECTION
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+FTR_SECTION_ELSE
+2:	b	3f
+3:	or	5,5,5
+	beq	3b
+	b	1f
+	or	6,6,6
+	b	2b
+1:	bdnz	3b
+ALT_FTR_SECTION_END(0, 1)
+	or	1,1,1
+
+globl(end_ftr_fixup_test5)
+
+globl(ftr_fixup_test5_expected)
+	or	1,1,1
+2:	b	3f
+3:	or	5,5,5
+	beq	3b
+	b	1f
+	or	6,6,6
+	b	2b
+1:	bdnz	3b
+	or	1,1,1
+
+globl(ftr_fixup_test6)
+1:	or	1,1,1
+BEGIN_FTR_SECTION
+	or	5,5,5
+2:	PPC_LCMPI	r3,0
+	beq	4f
+	blt	2b
+	b	1b
+	b	4f
+FTR_SECTION_ELSE
+2:	or	2,2,2
+	PPC_LCMPI	r3,1
+	beq	3f
+	blt	2b
+	b	3f
+	b	1b
+ALT_FTR_SECTION_END(0, 1)
+3:	or	1,1,1
+	or	2,2,2
+4:	or	3,3,3
+
+globl(end_ftr_fixup_test6)
+
+globl(ftr_fixup_test6_expected)
+1:	or	1,1,1
+2:	or	2,2,2
+	PPC_LCMPI	r3,1
+	beq	3f
+	blt	2b
+	b	3f
+	b	1b
+2:	or	1,1,1
+	or	2,2,2
+3:	or	3,3,3
+
+
+#define	MAKE_MACRO_TEST(TYPE)						\
+globl(ftr_fixup_test_ ##TYPE##_macros)					\
+	or	1,1,1;							\
+	/* Basic test, this section should all be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic test, this section should NOT be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, inner section should be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(80)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 80)					\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, whole section should be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(80)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 0, 80)					\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, none should be nop'ed */			\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(80)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 0, 80)					\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, default case should be taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	5,5,5;							\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, else case should be taken */		\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+	or	31,31,31;						\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt with smaller else case, should be padded with nops */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in default case */		\
+	/* Default case should be taken, with nop'ed inner section */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 95)					\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	5,5,5;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, else taken & nop */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	5,5,5;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95)				\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, else taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, all nop'ed */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95)				\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner else taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner else taken */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else can have large else case */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE 							\
+BEGIN_##TYPE##_SECTION_NESTED(94) 					\
+	or	5,5,5;							\
+	or	5,5,5;							\
+	or	5,5,5;							\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94) 					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94)				\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;
+
+#define	MAKE_MACRO_TEST_EXPECTED(TYPE)					\
+globl(ftr_fixup_test_ ##TYPE##_macros_expected)				\
+	or	1,1,1;							\
+	/* Basic test, this section should all be nop'ed */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	nop;								\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic test, this section should NOT be nop'ed */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, inner section should be nop'ed */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(80) */					\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 80) */				\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, whole section should be nop'ed */		\
+	/* NB. inner section is not nop'ed, but then entire outer is */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	nop;								\
+	nop;								\
+/* BEGIN_##TYPE##_SECTION_NESTED(80) */					\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 0, 80) */				\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, none should be nop'ed */			\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(80) */					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+/* END_##TYPE##_SECTION_NESTED(0, 0, 80) */				\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, default case should be taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, else case should be taken */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+	or	31,31,31;						\
+	or	31,31,31;						\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt with smaller else case, should be padded with nops */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+	nop;								\
+	nop;								\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in default case */		\
+	/* Default case should be taken, with nop'ed inner section */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	3,3,3;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */				\
+	or	3,3,3;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	5,5,5; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	3,3,3; */						\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */				\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, else taken & nop */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	5,5,5;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */				\
+	or	5,5,5;							\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	or	1,1,1;							\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */				\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, else taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	or	5,5,5;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, all nop'ed */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	nop;								\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	nop;								\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */				\
+	nop;								\
+/* END_##TYPE##_SECTION(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	or	1,1,1;							\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */				\
+	or	2,2,2;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	31,31,31; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	/* or	1,1,1; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */				\
+	/* or	31,31,31; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner else taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	or	5,5,5;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	or	2,2,2;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	31,31,31; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	/* or	1,1,1; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */				\
+	/* or	31,31,31; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	2,2,2; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	/* or	2,2,2; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	or	5,5,5;							\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	/* or	1,1,1; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */				\
+	or	31,31,31;						\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner else taken */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	2,2,2; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	/* or	2,2,2; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	or	1,1,1;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) */				\
+	or	31,31,31;						\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else can have large else case */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) */				\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;
+
+MAKE_MACRO_TEST(FTR);
+MAKE_MACRO_TEST_EXPECTED(FTR);
+
+#ifdef CONFIG_PPC64
+MAKE_MACRO_TEST(FW_FTR);
+MAKE_MACRO_TEST_EXPECTED(FW_FTR);
+#endif
+
+globl(lwsync_fixup_test)
+1:	or	1,1,1
+	LWSYNC
+globl(end_lwsync_fixup_test)
+
+globl(lwsync_fixup_test_expected_LWSYNC)
+1:	or	1,1,1
+	lwsync
+
+globl(lwsync_fixup_test_expected_SYNC)
+1:	or	1,1,1
+	sync
+
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
new file mode 100644
index 000000000000..8c5a03be31e0
--- /dev/null
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -0,0 +1,351 @@
+/*
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  Modifications for ppc64:
+ *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ *
+ *  Copyright 2008 Michael Ellerman, IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <asm/cputable.h>
+#include <asm/code-patching.h>
+
+
+struct fixup_entry {
+	unsigned long	mask;
+	unsigned long	value;
+	long		start_off;
+	long		end_off;
+	long		alt_start_off;
+	long		alt_end_off;
+};
+
+static unsigned int *calc_addr(struct fixup_entry *fcur, long offset)
+{
+	/*
+	 * We store the offset to the code as a negative offset from
+	 * the start of the alt_entry, to support the VDSO. This
+	 * routine converts that back into an actual address.
+	 */
+	return (unsigned int *)((unsigned long)fcur + offset);
+}
+
+static int patch_alt_instruction(unsigned int *src, unsigned int *dest,
+				 unsigned int *alt_start, unsigned int *alt_end)
+{
+	unsigned int instr;
+
+	instr = *src;
+
+	if (instr_is_relative_branch(*src)) {
+		unsigned int *target = (unsigned int *)branch_target(src);
+
+		/* Branch within the section doesn't need translating */
+		if (target < alt_start || target >= alt_end) {
+			instr = translate_branch(dest, src);
+			if (!instr)
+				return 1;
+		}
+	}
+
+	patch_instruction(dest, instr);
+
+	return 0;
+}
+
+static int patch_feature_section(unsigned long value, struct fixup_entry *fcur)
+{
+	unsigned int *start, *end, *alt_start, *alt_end, *src, *dest;
+
+	start = calc_addr(fcur, fcur->start_off);
+	end = calc_addr(fcur, fcur->end_off);
+	alt_start = calc_addr(fcur, fcur->alt_start_off);
+	alt_end = calc_addr(fcur, fcur->alt_end_off);
+
+	if ((alt_end - alt_start) > (end - start))
+		return 1;
+
+	if ((value & fcur->mask) == fcur->value)
+		return 0;
+
+	src = alt_start;
+	dest = start;
+
+	for (; src < alt_end; src++, dest++) {
+		if (patch_alt_instruction(src, dest, alt_start, alt_end))
+			return 1;
+	}
+
+	for (; dest < end; dest++)
+		patch_instruction(dest, PPC_NOP_INSTR);
+
+	return 0;
+}
+
+void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
+{
+	struct fixup_entry *fcur, *fend;
+
+	fcur = fixup_start;
+	fend = fixup_end;
+
+	for (; fcur < fend; fcur++) {
+		if (patch_feature_section(value, fcur)) {
+			WARN_ON(1);
+			printk("Unable to patch feature section at %p - %p" \
+				" with %p - %p\n",
+				calc_addr(fcur, fcur->start_off),
+				calc_addr(fcur, fcur->end_off),
+				calc_addr(fcur, fcur->alt_start_off),
+				calc_addr(fcur, fcur->alt_end_off));
+		}
+	}
+}
+
+void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
+{
+	unsigned int *start, *end, *dest;
+
+	if (!(value & CPU_FTR_LWSYNC))
+		return ;
+
+	start = fixup_start;
+	end = fixup_end;
+
+	for (; start < end; start++) {
+		dest = (void *)start + *start;
+		patch_instruction(dest, PPC_LWSYNC_INSTR);
+	}
+}
+
+#ifdef CONFIG_FTR_FIXUP_SELFTEST
+
+#define check(x)	\
+	if (!(x)) printk("feature-fixups: test failed at line %d\n", __LINE__);
+
+/* This must be after the text it fixes up, vmlinux.lds.S enforces that atm */
+static struct fixup_entry fixup;
+
+static long calc_offset(struct fixup_entry *entry, unsigned int *p)
+{
+	return (unsigned long)p - (unsigned long)entry;
+}
+
+void test_basic_patching(void)
+{
+	extern unsigned int ftr_fixup_test1;
+	extern unsigned int end_ftr_fixup_test1;
+	extern unsigned int ftr_fixup_test1_orig;
+	extern unsigned int ftr_fixup_test1_expected;
+	int size = &end_ftr_fixup_test1 - &ftr_fixup_test1;
+
+	fixup.value = fixup.mask = 8;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test1 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test1 + 2);
+	fixup.alt_start_off = fixup.alt_end_off = 0;
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+
+	/* Check we don't patch if the value matches */
+	patch_feature_section(8, &fixup);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+
+	/* Check we do patch if the value doesn't match */
+	patch_feature_section(0, &fixup);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0);
+
+	/* Check we do patch if the mask doesn't match */
+	memcpy(&ftr_fixup_test1, &ftr_fixup_test1_orig, size);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+	patch_feature_section(~8, &fixup);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0);
+}
+
+static void test_alternative_patching(void)
+{
+	extern unsigned int ftr_fixup_test2;
+	extern unsigned int end_ftr_fixup_test2;
+	extern unsigned int ftr_fixup_test2_orig;
+	extern unsigned int ftr_fixup_test2_alt;
+	extern unsigned int ftr_fixup_test2_expected;
+	int size = &end_ftr_fixup_test2 - &ftr_fixup_test2;
+
+	fixup.value = fixup.mask = 0xF;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test2 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test2 + 2);
+	fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test2_alt);
+	fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test2_alt + 1);
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+
+	/* Check we don't patch if the value matches */
+	patch_feature_section(0xF, &fixup);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+
+	/* Check we do patch if the value doesn't match */
+	patch_feature_section(0, &fixup);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0);
+
+	/* Check we do patch if the mask doesn't match */
+	memcpy(&ftr_fixup_test2, &ftr_fixup_test2_orig, size);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+	patch_feature_section(~0xF, &fixup);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0);
+}
+
+static void test_alternative_case_too_big(void)
+{
+	extern unsigned int ftr_fixup_test3;
+	extern unsigned int end_ftr_fixup_test3;
+	extern unsigned int ftr_fixup_test3_orig;
+	extern unsigned int ftr_fixup_test3_alt;
+	int size = &end_ftr_fixup_test3 - &ftr_fixup_test3;
+
+	fixup.value = fixup.mask = 0xC;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test3 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test3 + 2);
+	fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test3_alt);
+	fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test3_alt + 2);
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+
+	/* Expect nothing to be patched, and the error returned to us */
+	check(patch_feature_section(0xF, &fixup) == 1);
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+	check(patch_feature_section(0, &fixup) == 1);
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+	check(patch_feature_section(~0xF, &fixup) == 1);
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+}
+
+static void test_alternative_case_too_small(void)
+{
+	extern unsigned int ftr_fixup_test4;
+	extern unsigned int end_ftr_fixup_test4;
+	extern unsigned int ftr_fixup_test4_orig;
+	extern unsigned int ftr_fixup_test4_alt;
+	extern unsigned int ftr_fixup_test4_expected;
+	int size = &end_ftr_fixup_test4 - &ftr_fixup_test4;
+	unsigned long flag;
+
+	/* Check a high-bit flag */
+	flag = 1UL << ((sizeof(unsigned long) - 1) * 8);
+	fixup.value = fixup.mask = flag;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test4 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test4 + 5);
+	fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test4_alt);
+	fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test4_alt + 2);
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+
+	/* Check we don't patch if the value matches */
+	patch_feature_section(flag, &fixup);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+
+	/* Check we do patch if the value doesn't match */
+	patch_feature_section(0, &fixup);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0);
+
+	/* Check we do patch if the mask doesn't match */
+	memcpy(&ftr_fixup_test4, &ftr_fixup_test4_orig, size);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+	patch_feature_section(~flag, &fixup);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0);
+}
+
+static void test_alternative_case_with_branch(void)
+{
+	extern unsigned int ftr_fixup_test5;
+	extern unsigned int end_ftr_fixup_test5;
+	extern unsigned int ftr_fixup_test5_expected;
+	int size = &end_ftr_fixup_test5 - &ftr_fixup_test5;
+
+	check(memcmp(&ftr_fixup_test5, &ftr_fixup_test5_expected, size) == 0);
+}
+
+static void test_alternative_case_with_external_branch(void)
+{
+	extern unsigned int ftr_fixup_test6;
+	extern unsigned int end_ftr_fixup_test6;
+	extern unsigned int ftr_fixup_test6_expected;
+	int size = &end_ftr_fixup_test6 - &ftr_fixup_test6;
+
+	check(memcmp(&ftr_fixup_test6, &ftr_fixup_test6_expected, size) == 0);
+}
+
+static void test_cpu_macros(void)
+{
+	extern void ftr_fixup_test_FTR_macros;
+	extern void ftr_fixup_test_FTR_macros_expected;
+	unsigned long size = &ftr_fixup_test_FTR_macros_expected -
+			     &ftr_fixup_test_FTR_macros;
+
+	/* The fixups have already been done for us during boot */
+	check(memcmp(&ftr_fixup_test_FTR_macros,
+		     &ftr_fixup_test_FTR_macros_expected, size) == 0);
+}
+
+static void test_fw_macros(void)
+{
+#ifdef CONFIG_PPC64
+	extern void ftr_fixup_test_FW_FTR_macros;
+	extern void ftr_fixup_test_FW_FTR_macros_expected;
+	unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected -
+			     &ftr_fixup_test_FW_FTR_macros;
+
+	/* The fixups have already been done for us during boot */
+	check(memcmp(&ftr_fixup_test_FW_FTR_macros,
+		     &ftr_fixup_test_FW_FTR_macros_expected, size) == 0);
+#endif
+}
+
+static void test_lwsync_macros(void)
+{
+	extern void lwsync_fixup_test;
+	extern void end_lwsync_fixup_test;
+	extern void lwsync_fixup_test_expected_LWSYNC;
+	extern void lwsync_fixup_test_expected_SYNC;
+	unsigned long size = &end_lwsync_fixup_test -
+			     &lwsync_fixup_test;
+
+	/* The fixups have already been done for us during boot */
+	if (cur_cpu_spec->cpu_features & CPU_FTR_LWSYNC) {
+		check(memcmp(&lwsync_fixup_test,
+			     &lwsync_fixup_test_expected_LWSYNC, size) == 0);
+	} else {
+		check(memcmp(&lwsync_fixup_test,
+			     &lwsync_fixup_test_expected_SYNC, size) == 0);
+	}
+}
+
+static int __init test_feature_fixups(void)
+{
+	printk(KERN_DEBUG "Running feature fixup self-tests ...\n");
+
+	test_basic_patching();
+	test_alternative_patching();
+	test_alternative_case_too_big();
+	test_alternative_case_too_small();
+	test_alternative_case_with_branch();
+	test_alternative_case_with_external_branch();
+	test_cpu_macros();
+	test_fw_macros();
+	test_lwsync_macros();
+
+	return 0;
+}
+late_initcall(test_feature_fixups);
+
+#endif /* CONFIG_FTR_FIXUP_SELFTEST */
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index 49eb1f1a2bb4..64e2e499e32a 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -13,13 +13,7 @@
 #include <asm/ppc_asm.h>
 
 	.section __ex_table,"a"
-#ifdef CONFIG_PPC64
-	.align	3
-#define EXTBL	.llong
-#else
-	.align	2
-#define EXTBL	.long
-#endif
+	PPC_LONG_ALIGN
 	.text
 	
 _GLOBAL(strcpy)
@@ -160,9 +154,9 @@ _GLOBAL(__clear_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	11b,90b
-	EXTBL	1b,91b
-	EXTBL	8b,92b
+	PPC_LONG	11b,90b
+	PPC_LONG	1b,91b
+	PPC_LONG	8b,92b
 	.text
 
 _GLOBAL(__strncpy_from_user)
@@ -183,7 +177,7 @@ _GLOBAL(__strncpy_from_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	1b,99b
+	PPC_LONG	1b,99b
 	.text
 
 /* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
@@ -208,4 +202,4 @@ _GLOBAL(__strnlen_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	1b,99b
+	PPC_LONG	1b,99b
diff --git a/arch/powerpc/math-emu/math.c b/arch/powerpc/math-emu/math.c
index 381306bb1590..29e545e0272e 100644
--- a/arch/powerpc/math-emu/math.c
+++ b/arch/powerpc/math-emu/math.c
@@ -230,14 +230,14 @@ do_mathemu(struct pt_regs *regs)
 	case LFD:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		lfd(op0, op1, op2, op3);
 		break;
 	case LFDU:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		lfd(op0, op1, op2, op3);
 		regs->gpr[idx] = (unsigned long)op1;
@@ -245,21 +245,21 @@ do_mathemu(struct pt_regs *regs)
 	case STFD:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		stfd(op0, op1, op2, op3);
 		break;
 	case STFDU:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		stfd(op0, op1, op2, op3);
 		regs->gpr[idx] = (unsigned long)op1;
 		break;
 	case OP63:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		fmr(op0, op1, op2, op3);
 		break;
 	default:
@@ -356,28 +356,28 @@ do_mathemu(struct pt_regs *regs)
 
 	switch (type) {
 	case AB:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op2 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	case AC:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >>  6) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op2 = (void *)&current->thread.TS_FPR((insn >>  6) & 0x1f);
 		break;
 
 	case ABC:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
-		op3 = (void *)&current->thread.fpr[(insn >>  6) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op2 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
+		op3 = (void *)&current->thread.TS_FPR((insn >>  6) & 0x1f);
 		break;
 
 	case D:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		break;
 
@@ -387,27 +387,27 @@ do_mathemu(struct pt_regs *regs)
 			goto illegal;
 
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)(regs->gpr[idx] + sdisp);
 		break;
 
 	case X:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		break;
 
 	case XA:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
 		break;
 
 	case XB:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	case XE:
 		idx = (insn >> 16) & 0x1f;
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		if (!idx) {
 			if (((insn >> 1) & 0x3ff) == STFIWX)
 				op1 = (void *)(regs->gpr[(insn >> 11) & 0x1f]);
@@ -421,7 +421,7 @@ do_mathemu(struct pt_regs *regs)
 
 	case XEU:
 		idx = (insn >> 16) & 0x1f;
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0)
 				+ regs->gpr[(insn >> 11) & 0x1f]);
 		break;
@@ -429,8 +429,8 @@ do_mathemu(struct pt_regs *regs)
 	case XCR:
 		op0 = (void *)&regs->ccr;
 		op1 = (void *)((insn >> 23) & 0x7);
-		op2 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op3 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op2 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op3 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	case XCRL:
@@ -450,7 +450,7 @@ do_mathemu(struct pt_regs *regs)
 
 	case XFLB:
 		op0 = (void *)((insn >> 17) & 0xff);
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	default:
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 953fb919eb06..98052ac96580 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -27,6 +27,7 @@
 #include <asm/mmu.h>
 #include <asm/system.h>
 #include <asm/page.h>
+#include <asm/cacheflush.h>
 
 #include "mmu_decl.h"
 
@@ -37,11 +38,35 @@ unsigned int tlb_44x_index; /* = 0 */
 unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
 int icache_44x_need_flush;
 
+static void __init ppc44x_update_tlb_hwater(void)
+{
+	extern unsigned int tlb_44x_patch_hwater_D[];
+	extern unsigned int tlb_44x_patch_hwater_I[];
+
+	/* The TLB miss handlers hard codes the watermark in a cmpli
+	 * instruction to improve performances rather than loading it
+	 * from the global variable. Thus, we patch the instructions
+	 * in the 2 TLB miss handlers when updating the value
+	 */
+	tlb_44x_patch_hwater_D[0] = (tlb_44x_patch_hwater_D[0] & 0xffff0000) |
+		tlb_44x_hwater;
+	flush_icache_range((unsigned long)&tlb_44x_patch_hwater_D[0],
+			   (unsigned long)&tlb_44x_patch_hwater_D[1]);
+	tlb_44x_patch_hwater_I[0] = (tlb_44x_patch_hwater_I[0] & 0xffff0000) |
+		tlb_44x_hwater;
+	flush_icache_range((unsigned long)&tlb_44x_patch_hwater_I[0],
+			   (unsigned long)&tlb_44x_patch_hwater_I[1]);
+}
+
 /*
  * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
  */
 static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 {
+	unsigned int entry = tlb_44x_hwater--;
+
+	ppc44x_update_tlb_hwater();
+
 	__asm__ __volatile__(
 		"tlbwe	%2,%3,%4\n"
 		"tlbwe	%1,%3,%5\n"
@@ -50,7 +75,7 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
 	  "r" (phys),
 	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
-	  "r" (tlb_44x_hwater--), /* slot for this TLB entry */
+	  "r" (entry),
 	  "i" (PPC44x_TLB_PAGEID),
 	  "i" (PPC44x_TLB_XLAT),
 	  "i" (PPC44x_TLB_ATTRIB));
@@ -58,6 +83,8 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 
 void __init MMU_init_hw(void)
 {
+	ppc44x_update_tlb_hwater();
+
 	flush_instruction_cache();
 }
 
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 7b2510799266..565b7a237c84 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -100,31 +100,6 @@ static int store_updates_sp(struct pt_regs *regs)
 	return 0;
 }
 
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-static void do_dabr(struct pt_regs *regs, unsigned long address,
-		    unsigned long error_code)
-{
-	siginfo_t info;
-
-	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
-			11, SIGSEGV) == NOTIFY_STOP)
-		return;
-
-	if (debugger_dabr_match(regs))
-		return;
-
-	/* Clear the DABR */
-	set_dabr(0);
-
-	/* Deliver the signal to userspace */
-	info.si_signo = SIGTRAP;
-	info.si_errno = 0;
-	info.si_code = TRAP_HWBKPT;
-	info.si_addr = (void __user *)address;
-	force_sig_info(SIGTRAP, &info, current);
-}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-
 /*
  * For 600- and 800-family processors, the error_code parameter is DSISR
  * for a data fault, SRR1 for an instruction fault. For 400-family processors
@@ -306,7 +281,8 @@ good_area:
 					flush_dcache_icache_page(page);
 					set_bit(PG_arch_1, &page->flags);
 				}
-				pte_update(ptep, 0, _PAGE_HWEXEC);
+				pte_update(ptep, 0, _PAGE_HWEXEC |
+					   _PAGE_ACCESSED);
 				_tlbie(address, mm->context.id);
 				pte_unmap_unlock(ptep, ptl);
 				up_read(&mm->mmap_sem);
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 70f4c833fa32..a719f53921a5 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -388,7 +388,7 @@ _GLOBAL(__hash_page_4K)
 	 */
 	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
 	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
 	oris	r30,r30,_PAGE_COMBO@h
 	/* Write the linux PTE atomically (setting busy) */
 	stdcx.	r30,0,r6
@@ -468,7 +468,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	 * go to out-of-line code to try to modify the HPTE. We look for
 	 * the bit at (1 >> (index + 32))
 	 */
-	andi.	r0,r31,_PAGE_HASHPTE
+	rldicl.	r0,r31,64-12,48
 	li	r26,0			/* Default hidx */
 	beq	htab_insert_pte
 
@@ -726,11 +726,11 @@ BEGIN_FTR_SECTION
 	bne-	ht64_bail_ok
 END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
 	/* Prepare new PTE value (turn access RW into DIRTY, then
-	 * add BUSY,HASHPTE and ACCESSED)
+	 * add BUSY and ACCESSED)
 	 */
 	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
 	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
 	/* Write the linux PTE atomically (setting busy) */
 	stdcx.	r30,0,r6
 	bne-	1b
@@ -798,18 +798,21 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	/* Check if we may already be in the hashtable, in this case, we
 	 * go to out-of-line code to try to modify the HPTE
 	 */
-	andi.	r0,r31,_PAGE_HASHPTE
+	rldicl.	r0,r31,64-12,48
 	bne	ht64_modify_pte
 
 ht64_insert_pte:
 	/* Clear hpte bits in new pte (we also clear BUSY btw) and
-	 * add _PAGE_HASHPTE
+	 * add _PAGE_HPTE_SUB0
 	 */
 	lis	r0,_PAGE_HPTEFLAGS@h
 	ori	r0,r0,_PAGE_HPTEFLAGS@l
 	andc	r30,r30,r0
+#ifdef CONFIG_PPC_64K_PAGES
+	oris	r30,r30,_PAGE_HPTE_SUB0@h
+#else
 	ori	r30,r30,_PAGE_HASHPTE
-
+#endif
 	/* Phyical address in r5 */
 	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
 	sldi	r5,r5,PAGE_SHIFT
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 0f2d239d94c4..5ce5a4dcd008 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -68,6 +68,7 @@
 
 #define KB (1024)
 #define MB (1024*KB)
+#define GB (1024L*MB)
 
 /*
  * Note:  pte   --> Linux PTE
@@ -102,7 +103,6 @@ int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
 u16 mmu_slb_size = 64;
 #ifdef CONFIG_HUGETLB_PAGE
-int mmu_huge_psize = MMU_PAGE_16M;
 unsigned int HPAGE_SHIFT;
 #endif
 #ifdef CONFIG_PPC_64K_PAGES
@@ -120,7 +120,7 @@ static DEFINE_SPINLOCK(linear_map_hash_lock);
 
 /* Pre-POWER4 CPUs (4k pages only)
  */
-struct mmu_psize_def mmu_psize_defaults_old[] = {
+static struct mmu_psize_def mmu_psize_defaults_old[] = {
 	[MMU_PAGE_4K] = {
 		.shift	= 12,
 		.sllp	= 0,
@@ -134,7 +134,7 @@ struct mmu_psize_def mmu_psize_defaults_old[] = {
  *
  * Support for 16Mb large pages
  */
-struct mmu_psize_def mmu_psize_defaults_gp[] = {
+static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	[MMU_PAGE_4K] = {
 		.shift	= 12,
 		.sllp	= 0,
@@ -329,6 +329,44 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
 	return 0;
 }
 
+/* Scan for 16G memory blocks that have been set aside for huge pages
+ * and reserve those blocks for 16G huge pages.
+ */
+static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
+					const char *uname, int depth,
+					void *data) {
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	unsigned long *addr_prop;
+	u32 *page_count_prop;
+	unsigned int expected_pages;
+	long unsigned int phys_addr;
+	long unsigned int block_size;
+
+	/* We are scanning "memory" nodes only */
+	if (type == NULL || strcmp(type, "memory") != 0)
+		return 0;
+
+	/* This property is the log base 2 of the number of virtual pages that
+	 * will represent this memory block. */
+	page_count_prop = of_get_flat_dt_prop(node, "ibm,expected#pages", NULL);
+	if (page_count_prop == NULL)
+		return 0;
+	expected_pages = (1 << page_count_prop[0]);
+	addr_prop = of_get_flat_dt_prop(node, "reg", NULL);
+	if (addr_prop == NULL)
+		return 0;
+	phys_addr = addr_prop[0];
+	block_size = addr_prop[1];
+	if (block_size != (16 * GB))
+		return 0;
+	printk(KERN_INFO "Huge page(16GB) memory: "
+			"addr = 0x%lX size = 0x%lX pages = %d\n",
+			phys_addr, block_size, expected_pages);
+	lmb_reserve(phys_addr, block_size * expected_pages);
+	add_gpage(phys_addr, block_size, expected_pages);
+	return 0;
+}
+
 static void __init htab_init_page_sizes(void)
 {
 	int rc;
@@ -418,15 +456,18 @@ static void __init htab_init_page_sizes(void)
 	       );
 
 #ifdef CONFIG_HUGETLB_PAGE
-	/* Init large page size. Currently, we pick 16M or 1M depending
+	/* Reserve 16G huge page memory sections for huge pages */
+	of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
+
+/* Set default large page size. Currently, we pick 16M or 1M depending
 	 * on what is available
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift)
-		set_huge_psize(MMU_PAGE_16M);
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
 	/* With 4k/4level pagetables, we can't (for now) cope with a
 	 * huge page size < PMD_SIZE */
 	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
-		set_huge_psize(MMU_PAGE_1M);
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
 #endif /* CONFIG_HUGETLB_PAGE */
 }
 
@@ -533,8 +574,6 @@ void __init htab_initialize(void)
 	unsigned long base = 0, size = 0, limit;
 	int i;
 
-	extern unsigned long tce_alloc_start, tce_alloc_end;
-
 	DBG(" -> htab_initialize()\n");
 
 	/* Initialize segment sizes */
@@ -697,6 +736,28 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
 	return pp;
 }
 
+#ifdef CONFIG_PPC_MM_SLICES
+unsigned int get_paca_psize(unsigned long addr)
+{
+	unsigned long index, slices;
+
+	if (addr < SLICE_LOW_TOP) {
+		slices = get_paca()->context.low_slices_psize;
+		index = GET_LOW_SLICE_INDEX(addr);
+	} else {
+		slices = get_paca()->context.high_slices_psize;
+		index = GET_HIGH_SLICE_INDEX(addr);
+	}
+	return (slices >> (index * 4)) & 0xF;
+}
+
+#else
+unsigned int get_paca_psize(unsigned long addr)
+{
+	return get_paca()->context.user_psize;
+}
+#endif
+
 /*
  * Demote a segment to using 4k pages.
  * For now this makes the whole process use 4k pages.
@@ -704,13 +765,13 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
 #ifdef CONFIG_PPC_64K_PAGES
 void demote_segment_4k(struct mm_struct *mm, unsigned long addr)
 {
-	if (mm->context.user_psize == MMU_PAGE_4K)
+	if (get_slice_psize(mm, addr) == MMU_PAGE_4K)
 		return;
-	slice_set_user_psize(mm, MMU_PAGE_4K);
+	slice_set_range_psize(mm, addr, 1, MMU_PAGE_4K);
 #ifdef CONFIG_SPU_BASE
 	spu_flush_all_slbs(mm);
 #endif
-	if (get_paca()->context.user_psize != MMU_PAGE_4K) {
+	if (get_paca_psize(addr) != MMU_PAGE_4K) {
 		get_paca()->context = mm->context;
 		slb_flush_and_rebolt();
 	}
@@ -794,11 +855,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 			DBG_LOW(" user region with no mm !\n");
 			return 1;
 		}
-#ifdef CONFIG_PPC_MM_SLICES
 		psize = get_slice_psize(mm, ea);
-#else
-		psize = mm->context.user_psize;
-#endif
 		ssize = user_segment_size(ea);
 		vsid = get_vsid(mm->context.id, ea, ssize);
 		break;
@@ -831,7 +888,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* Handle hugepage regions */
-	if (HPAGE_SHIFT && psize == mmu_huge_psize) {
+	if (HPAGE_SHIFT && mmu_huge_psizes[psize]) {
 		DBG_LOW(" -> huge page !\n");
 		return hash_huge_page(mm, access, ea, vsid, local, trap);
 	}
@@ -870,7 +927,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	/* Do actual hashing */
 #ifdef CONFIG_PPC_64K_PAGES
 	/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
-	if (pte_val(*ptep) & _PAGE_4K_PFN) {
+	if ((pte_val(*ptep) & _PAGE_4K_PFN) && psize == MMU_PAGE_64K) {
 		demote_segment_4k(mm, ea);
 		psize = MMU_PAGE_4K;
 	}
@@ -899,7 +956,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 		}
 	}
 	if (user_region) {
-		if (psize != get_paca()->context.user_psize) {
+		if (psize != get_paca_psize(ea)) {
 			get_paca()->context = mm->context;
 			slb_flush_and_rebolt();
 		}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index a02266dad215..ed0aab0208a6 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -24,21 +24,43 @@
 #include <asm/cputable.h>
 #include <asm/spu.h>
 
-#define HPAGE_SHIFT_64K	16
-#define HPAGE_SHIFT_16M	24
+#define PAGE_SHIFT_64K	16
+#define PAGE_SHIFT_16M	24
+#define PAGE_SHIFT_16G	34
 
 #define NUM_LOW_AREAS	(0x100000000UL >> SID_SHIFT)
 #define NUM_HIGH_AREAS	(PGTABLE_RANGE >> HTLB_AREA_SHIFT)
+#define MAX_NUMBER_GPAGES	1024
 
-unsigned int hugepte_shift;
-#define PTRS_PER_HUGEPTE	(1 << hugepte_shift)
-#define HUGEPTE_TABLE_SIZE	(sizeof(pte_t) << hugepte_shift)
+/* Tracks the 16G pages after the device tree is scanned and before the
+ * huge_boot_pages list is ready.  */
+static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
+static unsigned nr_gpages;
 
-#define HUGEPD_SHIFT		(HPAGE_SHIFT + hugepte_shift)
-#define HUGEPD_SIZE		(1UL << HUGEPD_SHIFT)
-#define HUGEPD_MASK		(~(HUGEPD_SIZE-1))
+/* Array of valid huge page sizes - non-zero value(hugepte_shift) is
+ * stored for the huge page sizes that are valid.
+ */
+unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
+
+#define hugepte_shift			mmu_huge_psizes
+#define PTRS_PER_HUGEPTE(psize)		(1 << hugepte_shift[psize])
+#define HUGEPTE_TABLE_SIZE(psize)	(sizeof(pte_t) << hugepte_shift[psize])
+
+#define HUGEPD_SHIFT(psize)		(mmu_psize_to_shift(psize) \
+						+ hugepte_shift[psize])
+#define HUGEPD_SIZE(psize)		(1UL << HUGEPD_SHIFT(psize))
+#define HUGEPD_MASK(psize)		(~(HUGEPD_SIZE(psize)-1))
+
+/* Subtract one from array size because we don't need a cache for 4K since
+ * is not a huge page size */
+#define huge_pgtable_cache(psize)	(pgtable_cache[HUGEPTE_CACHE_NUM \
+							+ psize-1])
+#define HUGEPTE_CACHE_NAME(psize)	(huge_pgtable_cache_name[psize])
 
-#define huge_pgtable_cache	(pgtable_cache[HUGEPTE_CACHE_NUM])
+static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
+	"unused_4K", "hugepte_cache_64K", "unused_64K_AP",
+	"hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G"
+};
 
 /* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
  * will choke on pointers to hugepte tables, which is handy for
@@ -49,24 +71,49 @@ typedef struct { unsigned long pd; } hugepd_t;
 
 #define hugepd_none(hpd)	((hpd).pd == 0)
 
+static inline int shift_to_mmu_psize(unsigned int shift)
+{
+	switch (shift) {
+#ifndef CONFIG_PPC_64K_PAGES
+	case PAGE_SHIFT_64K:
+	    return MMU_PAGE_64K;
+#endif
+	case PAGE_SHIFT_16M:
+	    return MMU_PAGE_16M;
+	case PAGE_SHIFT_16G:
+	    return MMU_PAGE_16G;
+	}
+	return -1;
+}
+
+static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
+{
+	if (mmu_psize_defs[mmu_psize].shift)
+		return mmu_psize_defs[mmu_psize].shift;
+	BUG();
+}
+
 static inline pte_t *hugepd_page(hugepd_t hpd)
 {
 	BUG_ON(!(hpd.pd & HUGEPD_OK));
 	return (pte_t *)(hpd.pd & ~HUGEPD_OK);
 }
 
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr)
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
+				    struct hstate *hstate)
 {
-	unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1));
+	unsigned int shift = huge_page_shift(hstate);
+	int psize = shift_to_mmu_psize(shift);
+	unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1));
 	pte_t *dir = hugepd_page(*hpdp);
 
 	return dir + idx;
 }
 
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
-			   unsigned long address)
+			   unsigned long address, unsigned int psize)
 {
-	pte_t *new = kmem_cache_alloc(huge_pgtable_cache,
+	pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize),
 				      GFP_KERNEL|__GFP_REPEAT);
 
 	if (! new)
@@ -74,7 +121,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
 	spin_lock(&mm->page_table_lock);
 	if (!hugepd_none(*hpdp))
-		kmem_cache_free(huge_pgtable_cache, new);
+		kmem_cache_free(huge_pgtable_cache(psize), new);
 	else
 		hpdp->pd = (unsigned long)new | HUGEPD_OK;
 	spin_unlock(&mm->page_table_lock);
@@ -83,27 +130,60 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
 /* Base page size affects how we walk hugetlb page tables */
 #ifdef CONFIG_PPC_64K_PAGES
-#define hpmd_offset(pud, addr)		pmd_offset(pud, addr)
-#define hpmd_alloc(mm, pud, addr)	pmd_alloc(mm, pud, addr)
+#define hpmd_offset(pud, addr, h)	pmd_offset(pud, addr)
+#define hpmd_alloc(mm, pud, addr, h)	pmd_alloc(mm, pud, addr)
 #else
 static inline
-pmd_t *hpmd_offset(pud_t *pud, unsigned long addr)
+pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
 {
-	if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
 		return pmd_offset(pud, addr);
 	else
 		return (pmd_t *) pud;
 }
 static inline
-pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr)
+pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
+		  struct hstate *hstate)
 {
-	if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
 		return pmd_alloc(mm, pud, addr);
 	else
 		return (pmd_t *) pud;
 }
 #endif
 
+/* Build list of addresses of gigantic pages.  This function is used in early
+ * boot before the buddy or bootmem allocator is setup.
+ */
+void add_gpage(unsigned long addr, unsigned long page_size,
+	unsigned long number_of_pages)
+{
+	if (!addr)
+		return;
+	while (number_of_pages > 0) {
+		gpage_freearray[nr_gpages] = addr;
+		nr_gpages++;
+		number_of_pages--;
+		addr += page_size;
+	}
+}
+
+/* Moves the gigantic page addresses from the temporary list to the
+ * huge_boot_pages list.
+ */
+int alloc_bootmem_huge_page(struct hstate *hstate)
+{
+	struct huge_bootmem_page *m;
+	if (nr_gpages == 0)
+		return 0;
+	m = phys_to_virt(gpage_freearray[--nr_gpages]);
+	gpage_freearray[nr_gpages] = 0;
+	list_add(&m->list, &huge_boot_pages);
+	m->hstate = hstate;
+	return 1;
+}
+
+
 /* Modelled after find_linux_pte() */
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
@@ -111,39 +191,52 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	pud_t *pu;
 	pmd_t *pm;
 
-	BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+	unsigned int psize;
+	unsigned int shift;
+	unsigned long sz;
+	struct hstate *hstate;
+	psize = get_slice_psize(mm, addr);
+	shift = mmu_psize_to_shift(psize);
+	sz = ((1UL) << shift);
+	hstate = size_to_hstate(sz);
 
-	addr &= HPAGE_MASK;
+	addr &= hstate->mask;
 
 	pg = pgd_offset(mm, addr);
 	if (!pgd_none(*pg)) {
 		pu = pud_offset(pg, addr);
 		if (!pud_none(*pu)) {
-			pm = hpmd_offset(pu, addr);
+			pm = hpmd_offset(pu, addr, hstate);
 			if (!pmd_none(*pm))
-				return hugepte_offset((hugepd_t *)pm, addr);
+				return hugepte_offset((hugepd_t *)pm, addr,
+						      hstate);
 		}
 	}
 
 	return NULL;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pg;
 	pud_t *pu;
 	pmd_t *pm;
 	hugepd_t *hpdp = NULL;
+	struct hstate *hstate;
+	unsigned int psize;
+	hstate = size_to_hstate(sz);
 
-	BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+	psize = get_slice_psize(mm, addr);
+	BUG_ON(!mmu_huge_psizes[psize]);
 
-	addr &= HPAGE_MASK;
+	addr &= hstate->mask;
 
 	pg = pgd_offset(mm, addr);
 	pu = pud_alloc(mm, pg, addr);
 
 	if (pu) {
-		pm = hpmd_alloc(mm, pu, addr);
+		pm = hpmd_alloc(mm, pu, addr, hstate);
 		if (pm)
 			hpdp = (hugepd_t *)pm;
 	}
@@ -151,10 +244,10 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 	if (! hpdp)
 		return NULL;
 
-	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr))
+	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize))
 		return NULL;
 
-	return hugepte_offset(hpdp, addr);
+	return hugepte_offset(hpdp, addr, hstate);
 }
 
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
@@ -162,19 +255,22 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 0;
 }
 
-static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
+static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp,
+			       unsigned int psize)
 {
 	pte_t *hugepte = hugepd_page(*hpdp);
 
 	hpdp->pd = 0;
 	tlb->need_flush = 1;
-	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
+	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte,
+						 HUGEPTE_CACHE_NUM+psize-1,
 						 PGF_CACHENUM_MASK));
 }
 
 static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 				   unsigned long addr, unsigned long end,
-				   unsigned long floor, unsigned long ceiling)
+				   unsigned long floor, unsigned long ceiling,
+				   unsigned int psize)
 {
 	pmd_t *pmd;
 	unsigned long next;
@@ -186,7 +282,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 		next = pmd_addr_end(addr, end);
 		if (pmd_none(*pmd))
 			continue;
-		free_hugepte_range(tlb, (hugepd_t *)pmd);
+		free_hugepte_range(tlb, (hugepd_t *)pmd, psize);
 	} while (pmd++, addr = next, addr != end);
 
 	start &= PUD_MASK;
@@ -212,6 +308,9 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	pud_t *pud;
 	unsigned long next;
 	unsigned long start;
+	unsigned int shift;
+	unsigned int psize = get_slice_psize(tlb->mm, addr);
+	shift = mmu_psize_to_shift(psize);
 
 	start = addr;
 	pud = pud_offset(pgd, addr);
@@ -220,16 +319,18 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 #ifdef CONFIG_PPC_64K_PAGES
 		if (pud_none_or_clear_bad(pud))
 			continue;
-		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling,
+				       psize);
 #else
-		if (HPAGE_SHIFT == HPAGE_SHIFT_64K) {
+		if (shift == PAGE_SHIFT_64K) {
 			if (pud_none_or_clear_bad(pud))
 				continue;
-			hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+			hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
+					       ceiling, psize);
 		} else {
 			if (pud_none(*pud))
 				continue;
-			free_hugepte_range(tlb, (hugepd_t *)pud);
+			free_hugepte_range(tlb, (hugepd_t *)pud, psize);
 		}
 #endif
 	} while (pud++, addr = next, addr != end);
@@ -255,7 +356,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
  *
  * Must be called with pagetable lock held.
  */
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			    unsigned long addr, unsigned long end,
 			    unsigned long floor, unsigned long ceiling)
 {
@@ -297,31 +398,33 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb,
 	 * now has no other vmas using it, so can be freed, we don't
 	 * bother to round floor or end up - the tests don't need that.
 	 */
+	unsigned int psize = get_slice_psize(tlb->mm, addr);
 
-	addr &= HUGEPD_MASK;
+	addr &= HUGEPD_MASK(psize);
 	if (addr < floor) {
-		addr += HUGEPD_SIZE;
+		addr += HUGEPD_SIZE(psize);
 		if (!addr)
 			return;
 	}
 	if (ceiling) {
-		ceiling &= HUGEPD_MASK;
+		ceiling &= HUGEPD_MASK(psize);
 		if (!ceiling)
 			return;
 	}
 	if (end - 1 > ceiling - 1)
-		end -= HUGEPD_SIZE;
+		end -= HUGEPD_SIZE(psize);
 	if (addr > end - 1)
 		return;
 
 	start = addr;
-	pgd = pgd_offset((*tlb)->mm, addr);
+	pgd = pgd_offset(tlb->mm, addr);
 	do {
-		BUG_ON(get_slice_psize((*tlb)->mm, addr) != mmu_huge_psize);
+		psize = get_slice_psize(tlb->mm, addr);
+		BUG_ON(!mmu_huge_psizes[psize]);
 		next = pgd_addr_end(addr, end);
 		if (pgd_none_or_clear_bad(pgd))
 			continue;
-		hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
+		hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -334,7 +437,11 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		 * necessary anymore if we make hpte_need_flush() get the
 		 * page size from the slices
 		 */
-		pte_update(mm, addr & HPAGE_MASK, ptep, ~0UL, 1);
+		unsigned int psize = get_slice_psize(mm, addr);
+		unsigned int shift = mmu_psize_to_shift(psize);
+		unsigned long sz = ((1UL) << shift);
+		struct hstate *hstate = size_to_hstate(sz);
+		pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1);
 	}
 	*ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 }
@@ -351,14 +458,19 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 {
 	pte_t *ptep;
 	struct page *page;
+	unsigned int mmu_psize = get_slice_psize(mm, address);
 
-	if (get_slice_psize(mm, address) != mmu_huge_psize)
+	/* Verify it is a huge page else bail. */
+	if (!mmu_huge_psizes[mmu_psize])
 		return ERR_PTR(-EINVAL);
 
 	ptep = huge_pte_offset(mm, address);
 	page = pte_page(*ptep);
-	if (page)
-		page += (address % HPAGE_SIZE) / PAGE_SIZE;
+	if (page) {
+		unsigned int shift = mmu_psize_to_shift(mmu_psize);
+		unsigned long sz = ((1UL) << shift);
+		page += (address % sz) / PAGE_SIZE;
+	}
 
 	return page;
 }
@@ -368,6 +480,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -381,15 +498,16 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 					unsigned long len, unsigned long pgoff,
 					unsigned long flags)
 {
-	return slice_get_unmapped_area(addr, len, flags,
-				       mmu_huge_psize, 1, 0);
+	struct hstate *hstate = hstate_file(file);
+	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
 }
 
 /*
  * Called by asm hashtable.S for doing lazy icache flush
  */
 static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
-						  pte_t pte, int trap)
+					pte_t pte, int trap, unsigned long sz)
 {
 	struct page *page;
 	int i;
@@ -402,7 +520,7 @@ static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
 	/* page is dirty */
 	if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
 		if (trap == 0x400) {
-			for (i = 0; i < (HPAGE_SIZE / PAGE_SIZE); i++)
+			for (i = 0; i < (sz / PAGE_SIZE); i++)
 				__flush_dcache_icache(page_address(page+i));
 			set_bit(PG_arch_1, &page->flags);
 		} else {
@@ -418,11 +536,16 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 {
 	pte_t *ptep;
 	unsigned long old_pte, new_pte;
-	unsigned long va, rflags, pa;
+	unsigned long va, rflags, pa, sz;
 	long slot;
 	int err = 1;
 	int ssize = user_segment_size(ea);
+	unsigned int mmu_psize;
+	int shift;
+	mmu_psize = get_slice_psize(mm, ea);
 
+	if (!mmu_huge_psizes[mmu_psize])
+		goto out;
 	ptep = huge_pte_offset(mm, ea);
 
 	/* Search the Linux page table for a match with va */
@@ -458,38 +581,39 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 		old_pte = pte_val(*ptep);
 		if (old_pte & _PAGE_BUSY)
 			goto out;
-		new_pte = old_pte | _PAGE_BUSY |
-			_PAGE_ACCESSED | _PAGE_HASHPTE;
+		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
 	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
 					 old_pte, new_pte));
 
 	rflags = 0x2 | (!(new_pte & _PAGE_RW));
  	/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
 	rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
+	shift = mmu_psize_to_shift(mmu_psize);
+	sz = ((1UL) << shift);
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
 		/* No CPU has hugepages but lacks no execute, so we
 		 * don't need to worry about that case */
 		rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte),
-						       trap);
+						       trap, sz);
 
 	/* Check if pte already has an hpte (case 2) */
 	if (unlikely(old_pte & _PAGE_HASHPTE)) {
 		/* There MIGHT be an HPTE for this pte */
 		unsigned long hash, slot;
 
-		hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+		hash = hpt_hash(va, shift, ssize);
 		if (old_pte & _PAGE_F_SECOND)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 		slot += (old_pte & _PAGE_F_GIX) >> 12;
 
-		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_huge_psize,
+		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
 					 ssize, local) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
 
 	if (likely(!(old_pte & _PAGE_HASHPTE))) {
-		unsigned long hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+		unsigned long hash = hpt_hash(va, shift, ssize);
 		unsigned long hpte_group;
 
 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
@@ -499,16 +623,18 @@ repeat:
 			      HPTES_PER_GROUP) & ~0x7UL;
 
 		/* clear HPTE slot informations in new PTE */
+#ifdef CONFIG_PPC_64K_PAGES
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
+#else
 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
-
+#endif
 		/* Add in WIMG bits */
-		/* XXX We should store these in the pte */
-		/* --BenH: I think they are ... */
-		rflags |= _PAGE_COHERENT;
+		rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
+				      _PAGE_COHERENT | _PAGE_GUARDED));
 
 		/* Insert into the hash table, primary slot */
 		slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
-					  mmu_huge_psize, ssize);
+					  mmu_psize, ssize);
 
 		/* Primary is full, try the secondary */
 		if (unlikely(slot == -1)) {
@@ -516,7 +642,7 @@ repeat:
 				      HPTES_PER_GROUP) & ~0x7UL; 
 			slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
 						  HPTE_V_SECONDARY,
-						  mmu_huge_psize, ssize);
+						  mmu_psize, ssize);
 			if (slot == -1) {
 				if (mftb() & 0x1)
 					hpte_group = ((hash & htab_hash_mask) *
@@ -548,45 +674,54 @@ void set_huge_psize(int psize)
 {
 	/* Check that it is a page size supported by the hardware and
 	 * that it fits within pagetable limits. */
-	if (mmu_psize_defs[psize].shift && mmu_psize_defs[psize].shift < SID_SHIFT &&
+	if (mmu_psize_defs[psize].shift &&
+		mmu_psize_defs[psize].shift < SID_SHIFT_1T &&
 		(mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
-			mmu_psize_defs[psize].shift == HPAGE_SHIFT_64K)) {
-		HPAGE_SHIFT = mmu_psize_defs[psize].shift;
-		mmu_huge_psize = psize;
-#ifdef CONFIG_PPC_64K_PAGES
-		hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-#else
-		if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
-			hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-		else
-			hugepte_shift = (PUD_SHIFT-HPAGE_SHIFT);
-#endif
-
+		 mmu_psize_defs[psize].shift == PAGE_SHIFT_64K ||
+		 mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) {
+		/* Return if huge page size has already been setup or is the
+		 * same as the base page size. */
+		if (mmu_huge_psizes[psize] ||
+		   mmu_psize_defs[psize].shift == PAGE_SHIFT)
+			return;
+		hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
+
+		switch (mmu_psize_defs[psize].shift) {
+		case PAGE_SHIFT_64K:
+		    /* We only allow 64k hpages with 4k base page,
+		     * which was checked above, and always put them
+		     * at the PMD */
+		    hugepte_shift[psize] = PMD_SHIFT;
+		    break;
+		case PAGE_SHIFT_16M:
+		    /* 16M pages can be at two different levels
+		     * of pagestables based on base page size */
+		    if (PAGE_SHIFT == PAGE_SHIFT_64K)
+			    hugepte_shift[psize] = PMD_SHIFT;
+		    else /* 4k base page */
+			    hugepte_shift[psize] = PUD_SHIFT;
+		    break;
+		case PAGE_SHIFT_16G:
+		    /* 16G pages are always at PGD level */
+		    hugepte_shift[psize] = PGDIR_SHIFT;
+		    break;
+		}
+		hugepte_shift[psize] -= mmu_psize_defs[psize].shift;
 	} else
-		HPAGE_SHIFT = 0;
+		hugepte_shift[psize] = 0;
 }
 
 static int __init hugepage_setup_sz(char *str)
 {
 	unsigned long long size;
-	int mmu_psize = -1;
+	int mmu_psize;
 	int shift;
 
 	size = memparse(str, &str);
 
 	shift = __ffs(size);
-	switch (shift) {
-#ifndef CONFIG_PPC_64K_PAGES
-	case HPAGE_SHIFT_64K:
-		mmu_psize = MMU_PAGE_64K;
-		break;
-#endif
-	case HPAGE_SHIFT_16M:
-		mmu_psize = MMU_PAGE_16M;
-		break;
-	}
-
-	if (mmu_psize >=0 && mmu_psize_defs[mmu_psize].shift)
+	mmu_psize = shift_to_mmu_psize(shift);
+	if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift)
 		set_huge_psize(mmu_psize);
 	else
 		printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
@@ -595,23 +730,33 @@ static int __init hugepage_setup_sz(char *str)
 }
 __setup("hugepagesz=", hugepage_setup_sz);
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
-{
-	memset(addr, 0, kmem_cache_size(cache));
-}
-
 static int __init hugetlbpage_init(void)
 {
+	unsigned int psize;
+
 	if (!cpu_has_feature(CPU_FTR_16M_PAGE))
 		return -ENODEV;
-
-	huge_pgtable_cache = kmem_cache_create("hugepte_cache",
-					       HUGEPTE_TABLE_SIZE,
-					       HUGEPTE_TABLE_SIZE,
-					       0,
-					       zero_ctor);
-	if (! huge_pgtable_cache)
-		panic("hugetlbpage_init(): could not create hugepte cache\n");
+	/* Add supported huge page sizes.  Need to change HUGE_MAX_HSTATE
+	 * and adjust PTE_NONCACHE_NUM if the number of supported huge page
+	 * sizes changes.
+	 */
+	set_huge_psize(MMU_PAGE_16M);
+	set_huge_psize(MMU_PAGE_64K);
+	set_huge_psize(MMU_PAGE_16G);
+
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+		if (mmu_huge_psizes[psize]) {
+			huge_pgtable_cache(psize) = kmem_cache_create(
+						HUGEPTE_CACHE_NAME(psize),
+						HUGEPTE_TABLE_SIZE(psize),
+						HUGEPTE_TABLE_SIZE(psize),
+						0,
+						NULL);
+			if (!huge_pgtable_cache(psize))
+				panic("hugetlbpage_init(): could not create %s"\
+				      "\n", HUGEPTE_CACHE_NAME(psize));
+		}
+	}
 
 	return 0;
 }
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 1952b4d3fa7f..388ceda632f3 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -43,6 +43,7 @@
 #include <asm/btext.h>
 #include <asm/tlb.h>
 #include <asm/sections.h>
+#include <asm/system.h>
 
 #include "mmu_decl.h"
 
@@ -56,8 +57,8 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-unsigned long total_memory;
-unsigned long total_lowmem;
+phys_addr_t total_memory;
+phys_addr_t total_lowmem;
 
 phys_addr_t memstart_addr = (phys_addr_t)~0ull;
 EXPORT_SYMBOL(memstart_addr);
@@ -76,8 +77,6 @@ void MMU_init(void);
 /* XXX should be in current.h  -- paulus */
 extern struct task_struct *current_set[NR_CPUS];
 
-extern int init_bootmem_done;
-
 /*
  * this tells the system to map all of ram with the segregs
  * (i.e. page tables) instead of the bats.
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 6aa65375abf5..4f7df85129d8 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -136,9 +136,14 @@ static int __init setup_kcore(void)
 module_init(setup_kcore);
 #endif
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
+static void pgd_ctor(void *addr)
 {
-	memset(addr, 0, kmem_cache_size(cache));
+	memset(addr, 0, PGD_TABLE_SIZE);
+}
+
+static void pmd_ctor(void *addr)
+{
+	memset(addr, 0, PMD_TABLE_SIZE);
 }
 
 static const unsigned int pgtable_cache_size[2] = {
@@ -153,29 +158,18 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
 };
 
 #ifdef CONFIG_HUGETLB_PAGE
-/* Hugepages need one extra cache, initialized in hugetlbpage.c.  We
- * can't put into the tables above, because HPAGE_SHIFT is not compile
- * time constant. */
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1];
+/* Hugepages need an extra cache per hugepagesize, initialized in
+ * hugetlbpage.c.  We can't put into the tables above, because HPAGE_SHIFT
+ * is not compile time constant. */
+struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT];
 #else
 struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
 #endif
 
 void pgtable_cache_init(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
-		int size = pgtable_cache_size[i];
-		const char *name = pgtable_cache_name[i];
-
-		pr_debug("Allocating page table cache %s (#%d) "
-			"for size: %08x...\n", name, i, size);
-		pgtable_cache[i] = kmem_cache_create(name,
-						     size, size,
-						     SLAB_PANIC,
-						     zero_ctor);
-	}
+	pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
+	pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
@@ -185,7 +179,7 @@ void pgtable_cache_init(void)
  * do this by hand as the proffered address may not be correctly aligned.
  * Subtraction of non-aligned pointers produces undefined results.
  */
-unsigned long __meminit vmemmap_section_start(unsigned long page)
+static unsigned long __meminit vmemmap_section_start(unsigned long page)
 {
 	unsigned long offset = page - ((unsigned long)(vmemmap));
 
@@ -198,7 +192,7 @@ unsigned long __meminit vmemmap_section_start(unsigned long page)
  * which overlaps this vmemmap page is initialised then this page is
  * initialised already.
  */
-int __meminit vmemmap_populated(unsigned long start, int page_size)
+static int __meminit vmemmap_populated(unsigned long start, int page_size)
 {
 	unsigned long end = start + page_size;
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 51f82d83bf14..702691cb9e82 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -44,6 +44,7 @@
 #include <asm/btext.h>
 #include <asm/tlb.h>
 #include <asm/sections.h>
+#include <asm/sparsemem.h>
 #include <asm/vdso.h>
 #include <asm/fixmap.h>
 
@@ -185,45 +186,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
 }
 EXPORT_SYMBOL_GPL(walk_memory_resource);
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-#ifdef CONFIG_HIGHMEM
-	printk("%ld pages of HIGHMEM\n", highmem);
-#endif
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * Initialize the bootmem system and give it all the memory we
  * have available.  If we are using highmem, we only put the
@@ -329,7 +291,7 @@ static int __init mark_nonram_nosave(void)
 void __init paging_init(void)
 {
 	unsigned long total_ram = lmb_phys_mem_size();
-	unsigned long top_of_ram = lmb_end_of_DRAM();
+	phys_addr_t top_of_ram = lmb_end_of_DRAM();
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 #ifdef CONFIG_PPC32
@@ -348,10 +310,10 @@ void __init paging_init(void)
 	kmap_prot = PAGE_KERNEL;
 #endif /* CONFIG_HIGHMEM */
 
-	printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
-	       top_of_ram, total_ram);
+	printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n",
+	       (u64)top_of_ram, total_ram);
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
-	       (top_of_ram - total_ram) >> 20);
+	       (long int)((top_of_ram - total_ram) >> 20));
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 #ifdef CONFIG_HIGHMEM
 	max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 04802252a64f..fab3cfad4099 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -29,7 +29,7 @@ extern void hash_preload(struct mm_struct *mm, unsigned long ea,
 #ifdef CONFIG_PPC32
 extern void mapin_ram(void);
 extern int map_page(unsigned long va, phys_addr_t pa, int flags);
-extern void setbat(int index, unsigned long virt, unsigned long phys,
+extern void setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, int flags);
 extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 		      unsigned int size, int flags, unsigned int pid);
@@ -49,8 +49,8 @@ extern unsigned int num_tlbcam_entries;
 extern unsigned long ioremap_bot;
 extern unsigned long __max_low_memory;
 extern phys_addr_t __initial_memory_limit_addr;
-extern unsigned long total_memory;
-extern unsigned long total_lowmem;
+extern phys_addr_t total_memory;
+extern phys_addr_t total_lowmem;
 extern phys_addr_t memstart_addr;
 extern phys_addr_t lowmem_end_addr;
 
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index dc704da363eb..d9a181351332 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -39,7 +39,6 @@ EXPORT_SYMBOL(numa_cpu_lookup_table);
 EXPORT_SYMBOL(numa_cpumask_lookup_table);
 EXPORT_SYMBOL(node_data);
 
-static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES];
 static int min_common_depth;
 static int n_mem_addr_cells, n_mem_size_cells;
 
@@ -268,6 +267,144 @@ static unsigned long __devinit read_n_cells(int n, const unsigned int **buf)
 	return result;
 }
 
+struct of_drconf_cell {
+	u64	base_addr;
+	u32	drc_index;
+	u32	reserved;
+	u32	aa_index;
+	u32	flags;
+};
+
+#define DRCONF_MEM_ASSIGNED	0x00000008
+#define DRCONF_MEM_AI_INVALID	0x00000040
+#define DRCONF_MEM_RESERVED	0x00000080
+
+/*
+ * Read the next lmb list entry from the ibm,dynamic-memory property
+ * and return the information in the provided of_drconf_cell structure.
+ */
+static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
+{
+	const u32 *cp;
+
+	drmem->base_addr = read_n_cells(n_mem_addr_cells, cellp);
+
+	cp = *cellp;
+	drmem->drc_index = cp[0];
+	drmem->reserved = cp[1];
+	drmem->aa_index = cp[2];
+	drmem->flags = cp[3];
+
+	*cellp = cp + 4;
+}
+
+/*
+ * Retreive and validate the ibm,dynamic-memory property of the device tree.
+ *
+ * The layout of the ibm,dynamic-memory property is a number N of lmb
+ * list entries followed by N lmb list entries.  Each lmb list entry
+ * contains information as layed out in the of_drconf_cell struct above.
+ */
+static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
+{
+	const u32 *prop;
+	u32 len, entries;
+
+	prop = of_get_property(memory, "ibm,dynamic-memory", &len);
+	if (!prop || len < sizeof(unsigned int))
+		return 0;
+
+	entries = *prop++;
+
+	/* Now that we know the number of entries, revalidate the size
+	 * of the property read in to ensure we have everything
+	 */
+	if (len < (entries * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int))
+		return 0;
+
+	*dm = prop;
+	return entries;
+}
+
+/*
+ * Retreive and validate the ibm,lmb-size property for drconf memory
+ * from the device tree.
+ */
+static u64 of_get_lmb_size(struct device_node *memory)
+{
+	const u32 *prop;
+	u32 len;
+
+	prop = of_get_property(memory, "ibm,lmb-size", &len);
+	if (!prop || len < sizeof(unsigned int))
+		return 0;
+
+	return read_n_cells(n_mem_size_cells, &prop);
+}
+
+struct assoc_arrays {
+	u32	n_arrays;
+	u32	array_sz;
+	const u32 *arrays;
+};
+
+/*
+ * Retreive and validate the list of associativity arrays for drconf
+ * memory from the ibm,associativity-lookup-arrays property of the
+ * device tree..
+ *
+ * The layout of the ibm,associativity-lookup-arrays property is a number N
+ * indicating the number of associativity arrays, followed by a number M
+ * indicating the size of each associativity array, followed by a list
+ * of N associativity arrays.
+ */
+static int of_get_assoc_arrays(struct device_node *memory,
+			       struct assoc_arrays *aa)
+{
+	const u32 *prop;
+	u32 len;
+
+	prop = of_get_property(memory, "ibm,associativity-lookup-arrays", &len);
+	if (!prop || len < 2 * sizeof(unsigned int))
+		return -1;
+
+	aa->n_arrays = *prop++;
+	aa->array_sz = *prop++;
+
+	/* Now that we know the number of arrrays and size of each array,
+	 * revalidate the size of the property read in.
+	 */
+	if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
+		return -1;
+
+	aa->arrays = prop;
+	return 0;
+}
+
+/*
+ * This is like of_node_to_nid_single() for memory represented in the
+ * ibm,dynamic-reconfiguration-memory node.
+ */
+static int of_drconf_to_nid_single(struct of_drconf_cell *drmem,
+				   struct assoc_arrays *aa)
+{
+	int default_nid = 0;
+	int nid = default_nid;
+	int index;
+
+	if (min_common_depth > 0 && min_common_depth <= aa->array_sz &&
+	    !(drmem->flags & DRCONF_MEM_AI_INVALID) &&
+	    drmem->aa_index < aa->n_arrays) {
+		index = drmem->aa_index * aa->array_sz + min_common_depth - 1;
+		nid = aa->arrays[index];
+
+		if (nid == 0xffff || nid >= MAX_NUMNODES)
+			nid = default_nid;
+	}
+
+	return nid;
+}
+
 /*
  * Figure out to which domain a cpu belongs and stick it there.
  * Return the id of the domain used.
@@ -355,57 +492,50 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
  */
 static void __init parse_drconf_memory(struct device_node *memory)
 {
-	const unsigned int *lm, *dm, *aa;
-	unsigned int ls, ld, la;
-	unsigned int n, aam, aalen;
-	unsigned long lmb_size, size, start;
-	int nid, default_nid = 0;
-	unsigned int ai, flags;
-
-	lm = of_get_property(memory, "ibm,lmb-size", &ls);
-	dm = of_get_property(memory, "ibm,dynamic-memory", &ld);
-	aa = of_get_property(memory, "ibm,associativity-lookup-arrays", &la);
-	if (!lm || !dm || !aa ||
-	    ls < sizeof(unsigned int) || ld < sizeof(unsigned int) ||
-	    la < 2 * sizeof(unsigned int))
+	const u32 *dm;
+	unsigned int n, rc;
+	unsigned long lmb_size, size;
+	int nid;
+	struct assoc_arrays aa;
+
+	n = of_get_drconf_memory(memory, &dm);
+	if (!n)
+		return;
+
+	lmb_size = of_get_lmb_size(memory);
+	if (!lmb_size)
 		return;
 
-	lmb_size = read_n_cells(n_mem_size_cells, &lm);
-	n = *dm++;		/* number of LMBs */
-	aam = *aa++;		/* number of associativity lists */
-	aalen = *aa++;		/* length of each associativity list */
-	if (ld < (n * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int) ||
-	    la < (aam * aalen + 2) * sizeof(unsigned int))
+	rc = of_get_assoc_arrays(memory, &aa);
+	if (rc)
 		return;
 
 	for (; n != 0; --n) {
-		start = read_n_cells(n_mem_addr_cells, &dm);
-		ai = dm[2];
-		flags = dm[3];
-		dm += 4;
-		/* 0x80 == reserved, 0x8 = assigned to us */
-		if ((flags & 0x80) || !(flags & 0x8))
+		struct of_drconf_cell drmem;
+
+		read_drconf_cell(&drmem, &dm);
+
+		/* skip this block if the reserved bit is set in flags (0x80)
+		   or if the block is not assigned to this partition (0x8) */
+		if ((drmem.flags & DRCONF_MEM_RESERVED)
+		    || !(drmem.flags & DRCONF_MEM_ASSIGNED))
 			continue;
-		nid = default_nid;
-		/* flags & 0x40 means associativity index is invalid */
-		if (min_common_depth > 0 && min_common_depth <= aalen &&
-		    (flags & 0x40) == 0 && ai < aam) {
-			/* this is like of_node_to_nid_single */
-			nid = aa[ai * aalen + min_common_depth - 1];
-			if (nid == 0xffff || nid >= MAX_NUMNODES)
-				nid = default_nid;
-		}
 
-		fake_numa_create_new_node(((start + lmb_size) >> PAGE_SHIFT),
-						&nid);
+		nid = of_drconf_to_nid_single(&drmem, &aa);
+
+		fake_numa_create_new_node(
+				((drmem.base_addr + lmb_size) >> PAGE_SHIFT),
+					   &nid);
+
 		node_set_online(nid);
 
-		size = numa_enforce_memory_limit(start, lmb_size);
+		size = numa_enforce_memory_limit(drmem.base_addr, lmb_size);
 		if (!size)
 			continue;
 
-		add_active_range(nid, start >> PAGE_SHIFT,
-				 (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+		add_active_range(nid, drmem.base_addr >> PAGE_SHIFT,
+				 (drmem.base_addr >> PAGE_SHIFT)
+				 + (size >> PAGE_SHIFT));
 	}
 }
 
@@ -685,7 +815,7 @@ void __init do_init_bootmem(void)
   		dbg("node %d\n", nid);
 		dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
 
-		NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 		NODE_DATA(nid)->node_start_pfn = start_pfn;
 		NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
@@ -770,6 +900,79 @@ early_param("numa", early_numa);
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 /*
+ * Validate the node associated with the memory section we are
+ * trying to add.
+ */
+int valid_hot_add_scn(int *nid, unsigned long start, u32 lmb_size,
+		      unsigned long scn_addr)
+{
+	nodemask_t nodes;
+
+	if (*nid < 0 || !node_online(*nid))
+		*nid = any_online_node(NODE_MASK_ALL);
+
+	if ((scn_addr >= start) && (scn_addr < (start + lmb_size))) {
+		nodes_setall(nodes);
+		while (NODE_DATA(*nid)->node_spanned_pages == 0) {
+			node_clear(*nid, nodes);
+			*nid = any_online_node(nodes);
+		}
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Find the node associated with a hot added memory section represented
+ * by the ibm,dynamic-reconfiguration-memory node.
+ */
+static int hot_add_drconf_scn_to_nid(struct device_node *memory,
+				     unsigned long scn_addr)
+{
+	const u32 *dm;
+	unsigned int n, rc;
+	unsigned long lmb_size;
+	int default_nid = any_online_node(NODE_MASK_ALL);
+	int nid;
+	struct assoc_arrays aa;
+
+	n = of_get_drconf_memory(memory, &dm);
+	if (!n)
+		return default_nid;;
+
+	lmb_size = of_get_lmb_size(memory);
+	if (!lmb_size)
+		return default_nid;
+
+	rc = of_get_assoc_arrays(memory, &aa);
+	if (rc)
+		return default_nid;
+
+	for (; n != 0; --n) {
+		struct of_drconf_cell drmem;
+
+		read_drconf_cell(&drmem, &dm);
+
+		/* skip this block if it is reserved or not assigned to
+		 * this partition */
+		if ((drmem.flags & DRCONF_MEM_RESERVED)
+		    || !(drmem.flags & DRCONF_MEM_ASSIGNED))
+			continue;
+
+		nid = of_drconf_to_nid_single(&drmem, &aa);
+
+		if (valid_hot_add_scn(&nid, drmem.base_addr, lmb_size,
+				      scn_addr))
+			return nid;
+	}
+
+	BUG();	/* section address should be found above */
+	return 0;
+}
+
+/*
  * Find the node associated with a hot added memory section.  Section
  * corresponds to a SPARSEMEM section, not an LMB.  It is assumed that
  * sections are fully contained within a single LMB.
@@ -777,12 +980,17 @@ early_param("numa", early_numa);
 int hot_add_scn_to_nid(unsigned long scn_addr)
 {
 	struct device_node *memory = NULL;
-	nodemask_t nodes;
-	int default_nid = any_online_node(NODE_MASK_ALL);
 	int nid;
 
 	if (!numa_enabled || (min_common_depth < 0))
-		return default_nid;
+		return any_online_node(NODE_MASK_ALL);
+
+	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+	if (memory) {
+		nid = hot_add_drconf_scn_to_nid(memory, scn_addr);
+		of_node_put(memory);
+		return nid;
+	}
 
 	while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
 		unsigned long start, size;
@@ -801,13 +1009,9 @@ ha_new_range:
 		size = read_n_cells(n_mem_size_cells, &memcell_buf);
 		nid = of_node_to_nid_single(memory);
 
-		/* Domains not present at boot default to 0 */
-		if (nid < 0 || !node_online(nid))
-			nid = default_nid;
-
-		if ((scn_addr >= start) && (scn_addr < (start + size))) {
+		if (valid_hot_add_scn(&nid, start, size, scn_addr)) {
 			of_node_put(memory);
-			goto got_nid;
+			return nid;
 		}
 
 		if (--ranges)		/* process all ranges in cell */
@@ -815,14 +1019,5 @@ ha_new_range:
 	}
 	BUG();	/* section address should be found above */
 	return 0;
-
-	/* Temporary code to ensure that returned node is not empty */
-got_nid:
-	nodes_setall(nodes);
-	while (NODE_DATA(nid)->node_spanned_pages == 0) {
-		node_clear(nid, nodes);
-		nid = any_online_node(nodes);
-	}
-	return nid;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index e0ff59f21135..2001abdb1912 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -53,9 +53,9 @@ extern void hash_page_sync(void);
 #endif
 
 #ifdef HAVE_BATS
-extern unsigned long v_mapped_by_bats(unsigned long va);
-extern unsigned long p_mapped_by_bats(unsigned long pa);
-void setbat(int index, unsigned long virt, unsigned long phys,
+extern phys_addr_t v_mapped_by_bats(unsigned long va);
+extern unsigned long p_mapped_by_bats(phys_addr_t pa);
+void setbat(int index, unsigned long virt, phys_addr_t phys,
 	    unsigned int size, int flags);
 
 #else /* !HAVE_BATS */
@@ -145,13 +145,20 @@ void pte_free(struct mm_struct *mm, pgtable_t ptepage)
 void __iomem *
 ioremap(phys_addr_t addr, unsigned long size)
 {
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
+	return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
 }
 EXPORT_SYMBOL(ioremap);
 
 void __iomem *
 ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
 {
+	/* writeable implies dirty for kernel addresses */
+	if (flags & _PAGE_RW)
+		flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
+
+	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+	flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
+
 	return __ioremap(addr, size, flags);
 }
 EXPORT_SYMBOL(ioremap_flags);
@@ -163,6 +170,14 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 	phys_addr_t p;
 	int err;
 
+	/* Make sure we have the base flags */
+	if ((flags & _PAGE_PRESENT) == 0)
+		flags |= _PAGE_KERNEL;
+
+	/* Non-cacheable page cannot be coherent */
+	if (flags & _PAGE_NO_CACHE)
+		flags &= ~_PAGE_COHERENT;
+
 	/*
 	 * Choose an address to map it to.
 	 * Once the vmalloc system is running, we use it.
@@ -219,11 +234,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 		v = (ioremap_bot -= size);
 	}
 
-	if ((flags & _PAGE_PRESENT) == 0)
-		flags |= _PAGE_KERNEL;
-	if (flags & _PAGE_NO_CACHE)
-		flags |= _PAGE_GUARDED;
-
 	/*
 	 * Should check if it is a candidate for a BAT mapping
 	 */
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 3ef0ad2f9ca0..365e61ae5dbc 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -107,9 +107,18 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size,
 {
 	unsigned long i;
 
+	/* Make sure we have the base flags */
 	if ((flags & _PAGE_PRESENT) == 0)
 		flags |= pgprot_val(PAGE_KERNEL);
 
+	/* Non-cacheable page cannot be coherent */
+	if (flags & _PAGE_NO_CACHE)
+		flags &= ~_PAGE_COHERENT;
+
+	/* We don't support the 4K PFN hack with ioremap */
+	if (flags & _PAGE_4K_PFN)
+		return NULL;
+
 	WARN_ON(pa & ~PAGE_MASK);
 	WARN_ON(((unsigned long)ea) & ~PAGE_MASK);
 	WARN_ON(size & ~PAGE_MASK);
@@ -190,6 +199,13 @@ void __iomem * ioremap(phys_addr_t addr, unsigned long size)
 void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
 			     unsigned long flags)
 {
+	/* writeable implies dirty for kernel addresses */
+	if (flags & _PAGE_RW)
+		flags |= _PAGE_DIRTY;
+
+	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+	flags &= ~(_PAGE_USER | _PAGE_EXEC);
+
 	if (ppc_md.ioremap)
 		return ppc_md.ioremap(addr, size, flags);
 	return __ioremap(addr, size, flags);
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index cef9f156874b..c53145f61942 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -38,21 +38,18 @@ struct hash_pte *Hash, *Hash_end;
 unsigned long Hash_size, Hash_mask;
 unsigned long _SDR1;
 
-union ubat {			/* BAT register values to be loaded */
-	struct ppc_bat bat;
-	u32	word[2];
-} BATS[8][2];			/* 8 pairs of IBAT, DBAT */
+struct ppc_bat BATS[8][2];	/* 8 pairs of IBAT, DBAT */
 
 struct batrange {		/* stores address ranges mapped by BATs */
 	unsigned long start;
 	unsigned long limit;
-	unsigned long phys;
+	phys_addr_t phys;
 } bat_addrs[8];
 
 /*
  * Return PA for this VA if it is mapped by a BAT, or 0
  */
-unsigned long v_mapped_by_bats(unsigned long va)
+phys_addr_t v_mapped_by_bats(unsigned long va)
 {
 	int b;
 	for (b = 0; b < 4; ++b)
@@ -64,7 +61,7 @@ unsigned long v_mapped_by_bats(unsigned long va)
 /*
  * Return VA for a given PA or 0 if not mapped
  */
-unsigned long p_mapped_by_bats(unsigned long pa)
+unsigned long p_mapped_by_bats(phys_addr_t pa)
 {
 	int b;
 	for (b = 0; b < 4; ++b)
@@ -119,12 +116,12 @@ unsigned long __init mmu_mapin_ram(void)
  * The parameters are not checked; in particular size must be a power
  * of 2 between 128k and 256M.
  */
-void __init setbat(int index, unsigned long virt, unsigned long phys,
+void __init setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, int flags)
 {
 	unsigned int bl;
 	int wimgxpp;
-	union ubat *bat = BATS[index];
+	struct ppc_bat *bat = BATS[index];
 
 	if (((flags & _PAGE_NO_CACHE) == 0) &&
 	    cpu_has_feature(CPU_FTR_NEED_COHERENT))
@@ -137,15 +134,15 @@ void __init setbat(int index, unsigned long virt, unsigned long phys,
 		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
 				   | _PAGE_COHERENT | _PAGE_GUARDED);
 		wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
-		bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
-		bat[1].word[1] = phys | wimgxpp;
+		bat[1].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
+		bat[1].batl = BAT_PHYS_ADDR(phys) | wimgxpp;
 #ifndef CONFIG_KGDB /* want user access for breakpoints */
 		if (flags & _PAGE_USER)
 #endif
-			bat[1].bat.batu.vp = 1;
+			bat[1].batu |= 1; 	/* Vp = 1 */
 		if (flags & _PAGE_GUARDED) {
 			/* G bit must be zero in IBATs */
-			bat[0].word[0] = bat[0].word[1] = 0;
+			bat[0].batu = bat[0].batl = 0;
 		} else {
 			/* make IBAT same as DBAT */
 			bat[0] = bat[1];
@@ -158,8 +155,8 @@ void __init setbat(int index, unsigned long virt, unsigned long phys,
 				   | _PAGE_COHERENT);
 		wimgxpp |= (flags & _PAGE_RW)?
 			((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX;
-		bat->word[0] = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
-		bat->word[1] = phys | bl | 0x40;	/* V=1 */
+		bat->batu = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
+		bat->batl = phys | bl | 0x40;	/* V=1 */
 	}
 
 	bat_addrs[index].start = virt;
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index ad928edafb0a..db44e02e045b 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -215,10 +215,7 @@ static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psiz
 		  mm->context.high_slices_psize);
 
 	spin_unlock_irqrestore(&slice_convert_lock, flags);
-	mb();
 
-	/* XXX this is sub-optimal but will do for now */
-	on_each_cpu(slice_flush_segments, mm, 0, 1);
 #ifdef CONFIG_SPU_BASE
 	spu_flush_all_slbs(mm);
 #endif
@@ -384,17 +381,34 @@ static unsigned long slice_find_area(struct mm_struct *mm, unsigned long len,
 		return slice_find_area_bottomup(mm, len, mask, psize, use_cache);
 }
 
+#define or_mask(dst, src)	do {			\
+	(dst).low_slices |= (src).low_slices;		\
+	(dst).high_slices |= (src).high_slices;		\
+} while (0)
+
+#define andnot_mask(dst, src)	do {			\
+	(dst).low_slices &= ~(src).low_slices;		\
+	(dst).high_slices &= ~(src).high_slices;	\
+} while (0)
+
+#ifdef CONFIG_PPC_64K_PAGES
+#define MMU_PAGE_BASE	MMU_PAGE_64K
+#else
+#define MMU_PAGE_BASE	MMU_PAGE_4K
+#endif
+
 unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 				      unsigned long flags, unsigned int psize,
 				      int topdown, int use_cache)
 {
-	struct slice_mask mask;
+	struct slice_mask mask = {0, 0};
 	struct slice_mask good_mask;
 	struct slice_mask potential_mask = {0,0} /* silence stupid warning */;
-	int pmask_set = 0;
+	struct slice_mask compat_mask = {0, 0};
 	int fixed = (flags & MAP_FIXED);
 	int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
 	struct mm_struct *mm = current->mm;
+	unsigned long newaddr;
 
 	/* Sanity checks */
 	BUG_ON(mm->task_size == 0);
@@ -416,21 +430,48 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	if (!fixed && addr) {
 		addr = _ALIGN_UP(addr, 1ul << pshift);
 		slice_dbg(" aligned addr=%lx\n", addr);
+		/* Ignore hint if it's too large or overlaps a VMA */
+		if (addr > mm->task_size - len ||
+		    !slice_area_is_free(mm, addr, len))
+			addr = 0;
 	}
 
-	/* First makeup a "good" mask of slices that have the right size
+	/* First make up a "good" mask of slices that have the right size
 	 * already
 	 */
 	good_mask = slice_mask_for_size(mm, psize);
 	slice_print_mask(" good_mask", good_mask);
 
-	/* First check hint if it's valid or if we have MAP_FIXED */
-	if ((addr != 0 || fixed) && (mm->task_size - len) >= addr) {
+	/*
+	 * Here "good" means slices that are already the right page size,
+	 * "compat" means slices that have a compatible page size (i.e.
+	 * 4k in a 64k pagesize kernel), and "free" means slices without
+	 * any VMAs.
+	 *
+	 * If MAP_FIXED:
+	 *	check if fits in good | compat => OK
+	 *	check if fits in good | compat | free => convert free
+	 *	else bad
+	 * If have hint:
+	 *	check if hint fits in good => OK
+	 *	check if hint fits in good | free => convert free
+	 * Otherwise:
+	 *	search in good, found => OK
+	 *	search in good | free, found => convert free
+	 *	search in good | compat | free, found => convert free.
+	 */
 
-		/* Don't bother with hint if it overlaps a VMA */
-		if (!fixed && !slice_area_is_free(mm, addr, len))
-			goto search;
+#ifdef CONFIG_PPC_64K_PAGES
+	/* If we support combo pages, we can allow 64k pages in 4k slices */
+	if (psize == MMU_PAGE_64K) {
+		compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
+		if (fixed)
+			or_mask(good_mask, compat_mask);
+	}
+#endif
 
+	/* First check hint if it's valid or if we have MAP_FIXED */
+	if (addr != 0 || fixed) {
 		/* Build a mask for the requested range */
 		mask = slice_range_to_mask(addr, len);
 		slice_print_mask(" mask", mask);
@@ -442,54 +483,66 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 			slice_dbg(" fits good !\n");
 			return addr;
 		}
-
-		/* We don't fit in the good mask, check what other slices are
-		 * empty and thus can be converted
+	} else {
+		/* Now let's see if we can find something in the existing
+		 * slices for that size
 		 */
-		potential_mask = slice_mask_for_free(mm);
-		potential_mask.low_slices |= good_mask.low_slices;
-		potential_mask.high_slices |= good_mask.high_slices;
-		pmask_set = 1;
-		slice_print_mask(" potential", potential_mask);
-		if (slice_check_fit(mask, potential_mask)) {
-			slice_dbg(" fits potential !\n");
-			goto convert;
+		newaddr = slice_find_area(mm, len, good_mask, psize, topdown,
+					  use_cache);
+		if (newaddr != -ENOMEM) {
+			/* Found within the good mask, we don't have to setup,
+			 * we thus return directly
+			 */
+			slice_dbg(" found area at 0x%lx\n", newaddr);
+			return newaddr;
 		}
 	}
 
-	/* If we have MAP_FIXED and failed the above step, then error out */
+	/* We don't fit in the good mask, check what other slices are
+	 * empty and thus can be converted
+	 */
+	potential_mask = slice_mask_for_free(mm);
+	or_mask(potential_mask, good_mask);
+	slice_print_mask(" potential", potential_mask);
+
+	if ((addr != 0 || fixed) && slice_check_fit(mask, potential_mask)) {
+		slice_dbg(" fits potential !\n");
+		goto convert;
+	}
+
+	/* If we have MAP_FIXED and failed the above steps, then error out */
 	if (fixed)
 		return -EBUSY;
 
- search:
 	slice_dbg(" search...\n");
 
-	/* Now let's see if we can find something in the existing slices
-	 * for that size
+	/* If we had a hint that didn't work out, see if we can fit
+	 * anywhere in the good area.
 	 */
-	addr = slice_find_area(mm, len, good_mask, psize, topdown, use_cache);
-	if (addr != -ENOMEM) {
-		/* Found within the good mask, we don't have to setup,
-		 * we thus return directly
-		 */
-		slice_dbg(" found area at 0x%lx\n", addr);
-		return addr;
-	}
-
-	/* Won't fit, check what can be converted */
-	if (!pmask_set) {
-		potential_mask = slice_mask_for_free(mm);
-		potential_mask.low_slices |= good_mask.low_slices;
-		potential_mask.high_slices |= good_mask.high_slices;
-		pmask_set = 1;
-		slice_print_mask(" potential", potential_mask);
+	if (addr) {
+		addr = slice_find_area(mm, len, good_mask, psize, topdown,
+				       use_cache);
+		if (addr != -ENOMEM) {
+			slice_dbg(" found area at 0x%lx\n", addr);
+			return addr;
+		}
 	}
 
 	/* Now let's see if we can find something in the existing slices
-	 * for that size
+	 * for that size plus free slices
 	 */
 	addr = slice_find_area(mm, len, potential_mask, psize, topdown,
 			       use_cache);
+
+#ifdef CONFIG_PPC_64K_PAGES
+	if (addr == -ENOMEM && psize == MMU_PAGE_64K) {
+		/* retry the search with 4k-page slices included */
+		or_mask(potential_mask, compat_mask);
+		addr = slice_find_area(mm, len, potential_mask, psize,
+				       topdown, use_cache);
+	}
+#endif
+
 	if (addr == -ENOMEM)
 		return -ENOMEM;
 
@@ -498,7 +551,13 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	slice_print_mask(" mask", mask);
 
  convert:
-	slice_convert(mm, mask, psize);
+	andnot_mask(mask, good_mask);
+	andnot_mask(mask, compat_mask);
+	if (mask.low_slices || mask.high_slices) {
+		slice_convert(mm, mask, psize);
+		if (psize > MMU_PAGE_BASE)
+			on_each_cpu(slice_flush_segments, mm, 1);
+	}
 	return addr;
 
 }
@@ -598,6 +657,36 @@ void slice_set_user_psize(struct mm_struct *mm, unsigned int psize)
 	spin_unlock_irqrestore(&slice_convert_lock, flags);
 }
 
+void slice_set_psize(struct mm_struct *mm, unsigned long address,
+		     unsigned int psize)
+{
+	unsigned long i, flags;
+	u64 *p;
+
+	spin_lock_irqsave(&slice_convert_lock, flags);
+	if (address < SLICE_LOW_TOP) {
+		i = GET_LOW_SLICE_INDEX(address);
+		p = &mm->context.low_slices_psize;
+	} else {
+		i = GET_HIGH_SLICE_INDEX(address);
+		p = &mm->context.high_slices_psize;
+	}
+	*p = (*p & ~(0xful << (i * 4))) | ((unsigned long) psize << (i * 4));
+	spin_unlock_irqrestore(&slice_convert_lock, flags);
+
+#ifdef CONFIG_SPU_BASE
+	spu_flush_all_slbs(mm);
+#endif
+}
+
+void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
+			   unsigned long len, unsigned int psize)
+{
+	struct slice_mask mask = slice_range_to_mask(start, len);
+
+	slice_convert(mm, mask, psize);
+}
+
 /*
  * is_hugepage_only_range() is used by generic code to verify wether
  * a normal mmap mapping (non hugetlbfs) is valid on a given area.
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index efbbd13d93e5..60e6032a8088 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -30,8 +30,8 @@ struct stab_entry {
 };
 
 #define NR_STAB_CACHE_ENTRIES 8
-DEFINE_PER_CPU(long, stab_cache_ptr);
-DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
+static DEFINE_PER_CPU(long, stab_cache_ptr);
+static DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
 
 /*
  * Create a segment table entry for the given esid/vsid pair.
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index e2d867ce1c7e..409fcc7b63ce 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -37,8 +37,8 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
  * include/asm-powerpc/tlb.h file -- tgall
  */
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
-unsigned long pte_freelist_forced_free;
+static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
+static unsigned long pte_freelist_forced_free;
 
 struct pte_freelist_batch
 {
@@ -47,9 +47,6 @@ struct pte_freelist_batch
 	pgtable_free_t	tables[0];
 };
 
-DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
-unsigned long pte_freelist_forced_free;
-
 #define PTE_FREELIST_SIZE \
 	((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \
 	  / sizeof(pgtable_free_t))
@@ -66,7 +63,7 @@ static void pgtable_free_now(pgtable_free_t pgf)
 {
 	pte_freelist_forced_free++;
 
-	smp_call_function(pte_free_smp_sync, NULL, 0, 1);
+	smp_call_function(pte_free_smp_sync, NULL, 1);
 
 	pgtable_free(pgf);
 }
@@ -150,7 +147,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	 */
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
-		psize = mmu_huge_psize;
+		psize = get_slice_psize(mm, addr);;
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index 4908dc98f9ca..17807acb05d9 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -65,7 +65,7 @@ static int op_powerpc_setup(void)
 
 	/* Configure the registers on all cpus.	 If an error occurs on one
 	 * of the cpus, op_per_cpu_rc will be set to the error */
-	on_each_cpu(op_powerpc_cpu_setup, NULL, 0, 1);
+	on_each_cpu(op_powerpc_cpu_setup, NULL, 1);
 
 out:	if (op_per_cpu_rc) {
 		/* error on setup release the performance counter hardware */
@@ -100,7 +100,7 @@ static int op_powerpc_start(void)
 	if (model->global_start)
 		return model->global_start(ctr);
 	if (model->start) {
-		on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1);
+		on_each_cpu(op_powerpc_cpu_start, NULL, 1);
 		return op_per_cpu_rc;
 	}
 	return -EIO; /* No start function is defined for this
@@ -115,7 +115,7 @@ static inline void op_powerpc_cpu_stop(void *dummy)
 static void op_powerpc_stop(void)
 {
 	if (model->stop)
-		on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1);
+		on_each_cpu(op_powerpc_cpu_stop, NULL, 1);
         if (model->global_stop)
                 model->global_stop();
 }
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 6abe91357eee..249ba01c6674 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -17,6 +17,15 @@ config EBONY
 	help
 	  This option enables support for the IBM PPC440GP evaluation board.
 
+config SAM440EP
+        bool "Sam440ep"
+	depends on 44x
+        default n
+        select 440EP
+        select PCI
+        help
+          This option enables support for the ACube Sam440ep board.
+
 config SEQUOIA
 	bool "Sequoia"
 	depends on 44x
@@ -102,6 +111,22 @@ config YOSEMITE
 #	help
 #	  This option enables support for the IBM PPC440GX evaluation board.
 
+config XILINX_VIRTEX440_GENERIC_BOARD
+	bool "Generic Xilinx Virtex 440 board"
+	depends on 44x
+	default n
+	select XILINX_VIRTEX_5_FXT
+	help
+	  This option enables generic support for Xilinx Virtex based boards
+	  that use a 440 based processor in the Virtex 5 FXT FPGA architecture.
+
+	  The generic virtex board support matches any device tree which
+	  specifies 'xlnx,virtex440' in its compatible field.  This includes
+	  the Xilinx ML5xx reference designs using the powerpc core.
+
+	  Most Virtex 5 designs should use this unless it needs to do some
+	  special configuration at board probe time.
+
 # 44x specific CPU modules, selected based on the board above.
 config 440EP
 	bool
@@ -152,3 +177,13 @@ config 460EX
 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42
 	bool
+
+# Xilinx specific config options.
+config XILINX_VIRTEX
+	bool
+
+# Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
+config XILINX_VIRTEX_5_FXT
+	bool
+	select XILINX_VIRTEX
+
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 774165f9acdd..8d0b1a192d62 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -3,9 +3,11 @@ obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_TAISHAN)	+= taishan.o
 obj-$(CONFIG_BAMBOO)	+= bamboo.o
 obj-$(CONFIG_YOSEMITE)	+= bamboo.o
+obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_SEQUOIA)	+= sequoia.o
 obj-$(CONFIG_KATMAI)	+= katmai.o
 obj-$(CONFIG_RAINIER)	+= rainier.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_WARP)	+= warp-nand.o
 obj-$(CONFIG_CANYONLANDS) += canyonlands.o
+obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
diff --git a/arch/powerpc/platforms/44x/sam440ep.c b/arch/powerpc/platforms/44x/sam440ep.c
new file mode 100644
index 000000000000..47f10e647735
--- /dev/null
+++ b/arch/powerpc/platforms/44x/sam440ep.c
@@ -0,0 +1,79 @@
+/*
+ * Sam440ep board specific routines based off bamboo.c code
+ * original copyrights below
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * Modified from bamboo.c for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <linux/i2c.h>
+
+static __initdata struct of_device_id sam440ep_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init sam440ep_device_probe(void)
+{
+	of_platform_bus_probe(NULL, sam440ep_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(sam440ep, sam440ep_device_probe);
+
+static int __init sam440ep_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "acube,sam440ep"))
+		return 0;
+
+	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+	return 1;
+}
+
+define_machine(sam440ep) {
+	.name 			= "Sam440ep",
+	.probe 			= sam440ep_probe,
+	.progress 		= udbg_progress,
+	.init_IRQ 		= uic_init_tree,
+	.get_irq 		= uic_get_irq,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr 	= generic_calibrate_decr,
+};
+
+static struct i2c_board_info sam440ep_rtc_info = {
+	.type = "m41st85",
+	.addr = 0x68,
+	.irq = -1,
+};
+
+static int sam440ep_setup_rtc(void)
+{
+	return i2c_register_board_info(0, &sam440ep_rtc_info, 1);
+}
+machine_device_initcall(sam440ep, sam440ep_setup_rtc);
diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c
new file mode 100644
index 000000000000..68637faf70ae
--- /dev/null
+++ b/arch/powerpc/platforms/44x/virtex.c
@@ -0,0 +1,60 @@
+/*
+ * Xilinx Virtex 5FXT based board support, derived from
+ * the Xilinx Virtex (IIpro & 4FX) based board support
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ * Copyright 2008 Xilinx, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/xilinx_intc.h>
+#include <asm/reg.h>
+#include <asm/ppc4xx.h>
+#include "44x.h"
+
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+	{ .compatible = "simple-bus", },
+	{ .compatible = "xlnx,plb-v46-1.00.a", },
+	{ .compatible = "xlnx,plb-v46-1.02.a", },
+	{ .compatible = "xlnx,plb-v34-1.01.a", },
+	{ .compatible = "xlnx,plb-v34-1.02.a", },
+	{ .compatible = "xlnx,opb-v20-1.10.c", },
+	{ .compatible = "xlnx,dcr-v29-1.00.a", },
+	{ .compatible = "xlnx,compound", },
+	{}
+};
+
+static int __init virtex_device_probe(void)
+{
+	of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(virtex, virtex_device_probe);
+
+static int __init virtex_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "xlnx,virtex440"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(virtex) {
+	.name			= "Xilinx Virtex440",
+	.probe			= virtex_probe,
+	.init_IRQ		= xilinx_intc_init_tree,
+	.get_irq		= xilinx_intc_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= ppc4xx_reset_system,
+};
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index 9150318cfc56..e55746b824b4 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -11,8 +11,10 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/ndfc.h>
+#include <linux/of.h>
 #include <asm/machdep.h>
 
+
 #ifdef CONFIG_MTD_NAND_NDFC
 
 #define CS_NAND_0	1	/* use chip select 1 for NAND device 0 */
@@ -35,13 +37,23 @@ static struct mtd_partition nand_parts[] = {
 	{
 		.name   = "root",
 		.offset = 0x0200000,
-		.size   = 0x3400000
+		.size   = 0x3E00000
+	},
+	{
+		.name   = "persistent",
+		.offset = 0x4000000,
+		.size   = 0x4000000
 	},
 	{
-		.name   = "user",
-		.offset = 0x3600000,
-		.size   = 0x0A00000
+		.name   = "persistent1",
+		.offset = 0x8000000,
+		.size   = 0x4000000
 	},
+	{
+		.name   = "persistent2",
+		.offset = 0xC000000,
+		.size   = 0x4000000
+	}
 };
 
 struct ndfc_controller_settings warp_ndfc_settings = {
@@ -67,27 +79,22 @@ static struct platform_device warp_ndfc_device = {
 	.resource = &warp_ndfc,
 };
 
-static struct nand_ecclayout nand_oob_16 = {
-	.eccbytes = 3,
-	.eccpos = { 0, 1, 2, 3, 6, 7 },
-	.oobfree = { {.offset = 8, .length = 16} }
-};
-
+/* Do NOT set the ecclayout: let it default so it is correct for both
+ * 64M and 256M flash chips.
+ */
 static struct platform_nand_chip warp_nand_chip0 = {
 	.nr_chips = 1,
 	.chip_offset = CS_NAND_0,
 	.nr_partitions = ARRAY_SIZE(nand_parts),
 	.partitions = nand_parts,
-	.chip_delay = 50,
-	.ecclayout = &nand_oob_16,
+	.chip_delay = 20,
 	.priv = &warp_chip0_settings,
 };
 
 static struct platform_device warp_nand_device = {
 	.name = "ndfc-chip",
 	.id = 0,
-	.num_resources = 1,
-	.resource = &warp_ndfc,
+	.num_resources = 0,
 	.dev = {
 		.platform_data = &warp_nand_chip0,
 		.parent = &warp_ndfc_device.dev,
@@ -96,6 +103,28 @@ static struct platform_device warp_nand_device = {
 
 static int warp_setup_nand_flash(void)
 {
+	struct device_node *np;
+
+	/* Try to detect a rev A based on NOR size. */
+	np = of_find_compatible_node(NULL, NULL, "cfi-flash");
+	if (np) {
+		struct property *pp;
+
+		pp = of_find_property(np, "reg", NULL);
+		if (pp && (pp->length == 12)) {
+			u32 *v = pp->value;
+			if (v[2] == 0x4000000) {
+				/* Rev A = 64M NAND */
+				warp_nand_chip0.nr_partitions = 3;
+
+				nand_parts[1].size   = 0x3000000;
+				nand_parts[2].offset = 0x3200000;
+				nand_parts[2].size   = 0x0e00000;
+			}
+		}
+		of_node_put(np);
+	}
+
 	platform_device_register(&warp_ndfc_device);
 	platform_device_register(&warp_nand_device);
 
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 39cf6150a72b..9565995cba7f 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -12,6 +12,9 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/kthread.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -27,6 +30,18 @@ static __initdata struct of_device_id warp_of_bus[] = {
 	{},
 };
 
+static __initdata struct i2c_board_info warp_i2c_info[] = {
+	{ I2C_BOARD_INFO("ad7414", 0x4a) }
+};
+
+static int __init warp_arch_init(void)
+{
+	/* This should go away once support is moved to the dts. */
+	i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
+	return 0;
+}
+machine_arch_initcall(warp, warp_arch_init);
+
 static int __init warp_device_probe(void)
 {
 	of_platform_bus_probe(NULL, warp_of_bus, NULL);
@@ -52,61 +67,232 @@ define_machine(warp) {
 };
 
 
-#define LED_GREEN (0x80000000 >> 0)
-#define LED_RED   (0x80000000 >> 1)
+/* I am not sure this is the best place for this... */
+static int __init warp_post_info(void)
+{
+	struct device_node *np;
+	void __iomem *fpga;
+	u32 post1, post2;
+
+	/* Sighhhh... POST information is in the sd area. */
+	np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd");
+	if (np == NULL)
+		return -ENOENT;
+
+	fpga = of_iomap(np, 0);
+	of_node_put(np);
+	if (fpga == NULL)
+		return -ENOENT;
+
+	post1 = in_be32(fpga + 0x40);
+	post2 = in_be32(fpga + 0x44);
+
+	iounmap(fpga);
+
+	if (post1 || post2)
+		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
+	else
+		printk(KERN_INFO "Warp POST OK\n");
+
+	return 0;
+}
+machine_late_initcall(warp, warp_post_info);
+
+
+#ifdef CONFIG_SENSORS_AD7414
+
+static LIST_HEAD(dtm_shutdown_list);
+static void __iomem *dtm_fpga;
+static void __iomem *gpio_base;
+
+
+struct dtm_shutdown {
+	struct list_head list;
+	void (*func)(void *arg);
+	void *arg;
+};
 
 
-/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */
-void warp_set_power_leds(int green, int red)
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
 {
-	static void __iomem *gpio_base = NULL;
-	unsigned leds;
-
-	if (gpio_base == NULL) {
-		struct device_node *np;
-
-		/* Power LEDS are on the second GPIO controller */
-		np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
-		if (np)
-			np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP");
-		if (np == NULL) {
-			printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
-			return;
+	struct dtm_shutdown *shutdown;
+
+	shutdown = kmalloc(sizeof(struct dtm_shutdown), GFP_KERNEL);
+	if (shutdown == NULL)
+		return -ENOMEM;
+
+	shutdown->func = func;
+	shutdown->arg = arg;
+
+	list_add(&shutdown->list, &dtm_shutdown_list);
+
+	return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+	struct dtm_shutdown *shutdown;
+
+	list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+		if (shutdown->func == func && shutdown->arg == arg) {
+			list_del(&shutdown->list);
+			kfree(shutdown);
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static irqreturn_t temp_isr(int irq, void *context)
+{
+	struct dtm_shutdown *shutdown;
+
+	local_irq_disable();
+
+	/* Run through the shutdown list. */
+	list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+		shutdown->func(shutdown->arg);
+
+	printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n");
+
+	while (1) {
+		if (dtm_fpga) {
+			unsigned reset = in_be32(dtm_fpga + 0x14);
+			out_be32(dtm_fpga + 0x14, reset);
 		}
 
-		gpio_base = of_iomap(np, 0);
-		of_node_put(np);
-		if (gpio_base == NULL) {
-			printk(KERN_ERR __FILE__ ": Unable to map gpio");
-			return;
+		if (gpio_base) {
+			unsigned leds = in_be32(gpio_base);
+
+			/* green off, red toggle */
+			leds &= ~0x80000000;
+			leds ^=  0x40000000;
+
+			out_be32(gpio_base, leds);
 		}
+
+		mdelay(500);
+	}
+}
+
+static int pika_setup_leds(void)
+{
+	struct device_node *np;
+	const u32 *gpios;
+	int len;
+
+	np = of_find_compatible_node(NULL, NULL, "linux,gpio-led");
+	if (!np) {
+		printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n");
+		return -ENOENT;
 	}
 
-	leds = in_be32(gpio_base);
+	gpios = of_get_property(np, "gpios", &len);
+	of_node_put(np);
+	if (!gpios || len < 4) {
+		printk(KERN_ERR __FILE__
+		       ": Unable to get gpios property (%d)\n", len);
+		return -ENOENT;
+	}
 
-	switch (green) {
-	case 0: leds &= ~LED_GREEN; break;
-	case 1: leds |=  LED_GREEN; break;
+	np = of_find_node_by_phandle(gpios[0]);
+	if (!np) {
+		printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
+		return -ENOENT;
 	}
-	switch (red) {
-	case 0: leds &= ~LED_RED; break;
-	case 1: leds |=  LED_RED; break;
+
+	gpio_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!gpio_base) {
+		printk(KERN_ERR __FILE__ ": Unable to map gpio");
+		return -ENOMEM;
 	}
 
-	out_be32(gpio_base, leds);
+	return 0;
 }
-EXPORT_SYMBOL(warp_set_power_leds);
 
+static void pika_setup_critical_temp(struct i2c_client *client)
+{
+	struct device_node *np;
+	int irq, rc;
+
+	/* Do this before enabling critical temp interrupt since we
+	 * may immediately interrupt.
+	 */
+	pika_setup_leds();
+
+	/* These registers are in 1 degree increments. */
+	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
+	i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
+
+	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+	if (np == NULL) {
+		printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
+		return;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	of_node_put(np);
+	if (irq  == NO_IRQ) {
+		printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
+		return;
+	}
+
+	rc = request_irq(irq, temp_isr, 0, "ad7414", NULL);
+	if (rc) {
+		printk(KERN_ERR __FILE__
+		       ": Unable to request ad7414 irq %d = %d\n", irq, rc);
+		return;
+	}
+}
+
+static inline void pika_dtm_check_fan(void __iomem *fpga)
+{
+	static int fan_state;
+	u32 fan = in_be32(fpga + 0x34) & (1 << 14);
+
+	if (fan_state != fan) {
+		fan_state = fan;
+		if (fan)
+			printk(KERN_WARNING "Fan rotation error detected."
+				   " Please check hardware.\n");
+	}
+}
 
-#ifdef CONFIG_SENSORS_AD7414
 static int pika_dtm_thread(void __iomem *fpga)
 {
-	extern int ad7414_get_temp(int index);
+	struct i2c_adapter *adap;
+	struct i2c_client *client;
+
+	/* We loop in case either driver was compiled as a module and
+	 * has not been insmoded yet.
+	 */
+	while (!(adap = i2c_get_adapter(0))) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ);
+	}
+
+	while (1) {
+		list_for_each_entry(client, &adap->clients, list)
+			if (client->addr == 0x4a)
+				goto found_it;
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ);
+	}
+
+found_it:
+	i2c_put_adapter(adap);
+
+	pika_setup_critical_temp(client);
+
+	printk(KERN_INFO "PIKA DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
-		int temp = ad7414_get_temp(0);
+		u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
+		out_be32(fpga + 0x20, temp);
 
-		out_be32(fpga, temp);
+		pika_dtm_check_fan(fpga);
 
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(HZ);
@@ -115,37 +301,44 @@ static int pika_dtm_thread(void __iomem *fpga)
 	return 0;
 }
 
+
 static int __init pika_dtm_start(void)
 {
 	struct task_struct *dtm_thread;
 	struct device_node *np;
-	struct resource res;
-	void __iomem *fpga;
 
 	np = of_find_compatible_node(NULL, NULL, "pika,fpga");
 	if (np == NULL)
 		return -ENOENT;
 
-	/* We do not call of_iomap here since it would map in the entire
-	 * fpga space, which is over 8k.
-	 */
-	if (of_address_to_resource(np, 0, &res)) {
-		of_node_put(np);
-		return -ENOENT;
-	}
+	dtm_fpga = of_iomap(np, 0);
 	of_node_put(np);
-
-	fpga = ioremap(res.start, 0x24);
-	if (fpga == NULL)
+	if (dtm_fpga == NULL)
 		return -ENOENT;
 
-	dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm");
+	dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm");
 	if (IS_ERR(dtm_thread)) {
-		iounmap(fpga);
+		iounmap(dtm_fpga);
 		return PTR_ERR(dtm_thread);
 	}
 
 	return 0;
 }
-device_initcall(pika_dtm_start);
+machine_late_initcall(warp, pika_dtm_start);
+
+#else /* !CONFIG_SENSORS_AD7414 */
+
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
+{
+	return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+	return 0;
+}
+
 #endif
+
+EXPORT_SYMBOL(pika_dtm_register_shutdown);
+EXPORT_SYMBOL(pika_dtm_unregister_shutdown);
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 4c0da0c079e9..c62f893ede19 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -2,18 +2,29 @@ config PPC_MPC512x
 	bool
 	select FSL_SOC
 	select IPIC
-	default n
+	select PPC_CLOCK
 
 config PPC_MPC5121
 	bool
 	select PPC_MPC512x
-	default n
 
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
 	depends on PPC_MULTIPLATFORM && PPC32
 	select DEFAULT_UIMAGE
 	select PPC_MPC5121
+	select MPC5121_ADS_CPLD
 	help
 	  This option enables support for the MPC5121E ADS board.
-	default n
+
+config MPC5121_GENERIC
+	bool "Generic support for simple MPC5121 based boards"
+	depends on PPC_MULTIPLATFORM && PPC32
+	select DEFAULT_UIMAGE
+	select PPC_MPC5121
+	help
+	  This option enables support for simple MPC5121 based boards
+	  which do not need custom platform specific setup.
+
+	  Compatible boards include:  Protonic LVT base boards (ZANMCU
+	  and VICVT2).
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 232c89f2039a..90be2f5717e6 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -1,4 +1,6 @@
 #
 # Makefile for the Freescale PowerPC 512x linux kernel.
 #
-obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o
+obj-y				+= clock.o mpc512x_shared.o
+obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
+obj-$(CONFIG_MPC5121_GENERIC)	+= mpc5121_generic.o
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
new file mode 100644
index 000000000000..f416014ee727
--- /dev/null
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -0,0 +1,729 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Implements the clk api defined in include/linux/clk.h
+ *
+ *    Original based on linux/arch/arm/mach-integrator/clock.c
+ *
+ *    Copyright (C) 2004 ARM Limited.
+ *    Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <linux/of_platform.h>
+#include <asm/mpc512x.h>
+#include <asm/clk_interface.h>
+
+#undef CLK_DEBUG
+
+static int clocks_initialized;
+
+#define CLK_HAS_RATE	0x1	/* has rate in MHz */
+#define CLK_HAS_CTRL	0x2	/* has control reg and bit */
+
+struct clk {
+	struct list_head node;
+	char name[32];
+	int flags;
+	struct device *dev;
+	unsigned long rate;
+	struct module *owner;
+	void (*calc) (struct clk *);
+	struct clk *parent;
+	int reg, bit;		/* CLK_HAS_CTRL */
+	int div_shift;		/* only used by generic_div_clk_calc */
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+	int dev_match = 0;
+	int id_match = 0;
+
+	if (dev == NULL && id == NULL)
+		return NULL;
+
+	mutex_lock(&clocks_mutex);
+	list_for_each_entry(p, &clocks, node) {
+		if (dev && dev == p->dev)
+			dev_match++;
+		if (strcmp(id, p->name) == 0)
+			id_match++;
+		if ((dev_match || id_match) && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+	mutex_unlock(&clocks_mutex);
+
+	return clk;
+}
+
+#ifdef CLK_DEBUG
+static void dump_clocks(void)
+{
+	struct clk *p;
+
+	mutex_lock(&clocks_mutex);
+	printk(KERN_INFO "CLOCKS:\n");
+	list_for_each_entry(p, &clocks, node) {
+		printk(KERN_INFO "  %s %ld", p->name, p->rate);
+		if (p->parent)
+			printk(KERN_INFO " %s %ld", p->parent->name,
+			       p->parent->rate);
+		if (p->flags & CLK_HAS_CTRL)
+			printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit);
+		printk("\n");
+	}
+	mutex_unlock(&clocks_mutex);
+}
+#define	DEBUG_CLK_DUMP() dump_clocks()
+#else
+#define	DEBUG_CLK_DUMP()
+#endif
+
+
+static void mpc5121_clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+
+#define NRPSC 12
+
+struct mpc512x_clockctl {
+	u32 spmr;		/* System PLL Mode Reg */
+	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
+	u32 scfr1;		/* System Clk Freq Reg 1 */
+	u32 scfr2;		/* System Clk Freq Reg 2 */
+	u32 reserved;
+	u32 bcr;		/* Bread Crumb Reg */
+	u32 pccr[NRPSC];	/* PSC Clk Ctrl Reg 0-11 */
+	u32 spccr;		/* SPDIF Clk Ctrl Reg */
+	u32 cccr;		/* CFM Clk Ctrl Reg */
+	u32 dccr;		/* DIU Clk Cnfg Reg */
+};
+
+struct mpc512x_clockctl __iomem *clockctl;
+
+static int mpc5121_clk_enable(struct clk *clk)
+{
+	unsigned int mask;
+
+	if (clk->flags & CLK_HAS_CTRL) {
+		mask = in_be32(&clockctl->sccr[clk->reg]);
+		mask |= 1 << clk->bit;
+		out_be32(&clockctl->sccr[clk->reg], mask);
+	}
+	return 0;
+}
+
+static void mpc5121_clk_disable(struct clk *clk)
+{
+	unsigned int mask;
+
+	if (clk->flags & CLK_HAS_CTRL) {
+		mask = in_be32(&clockctl->sccr[clk->reg]);
+		mask &= ~(1 << clk->bit);
+		out_be32(&clockctl->sccr[clk->reg], mask);
+	}
+}
+
+static unsigned long mpc5121_clk_get_rate(struct clk *clk)
+{
+	if (clk->flags & CLK_HAS_RATE)
+		return clk->rate;
+	else
+		return 0;
+}
+
+static long mpc5121_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+
+static int mpc5121_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static int clk_register(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	list_add(&clk->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+	return 0;
+}
+
+static unsigned long spmf_mult(void)
+{
+	/*
+	 * Convert spmf to multiplier
+	 */
+	static int spmf_to_mult[] = {
+		68, 1, 12, 16,
+		20, 24, 28, 32,
+		36, 40, 44, 48,
+		52, 56, 60, 64
+	};
+	int spmf = (clockctl->spmr >> 24) & 0xf;
+	return spmf_to_mult[spmf];
+}
+
+static unsigned long sysdiv_div_x_2(void)
+{
+	/*
+	 * Convert sysdiv to divisor x 2
+	 * Some divisors have fractional parts so
+	 * multiply by 2 then divide by this value
+	 */
+	static int sysdiv_to_div_x_2[] = {
+		4, 5, 6, 7,
+		8, 9, 10, 14,
+		12, 16, 18, 22,
+		20, 24, 26, 30,
+		28, 32, 34, 38,
+		36, 40, 42, 46,
+		44, 48, 50, 54,
+		52, 56, 58, 62,
+		60, 64, 66,
+	};
+	int sysdiv = (clockctl->scfr2 >> 26) & 0x3f;
+	return sysdiv_to_div_x_2[sysdiv];
+}
+
+static unsigned long ref_to_sys(unsigned long rate)
+{
+	rate *= spmf_mult();
+	rate *= 2;
+	rate /= sysdiv_div_x_2();
+
+	return rate;
+}
+
+static unsigned long sys_to_ref(unsigned long rate)
+{
+	rate *= sysdiv_div_x_2();
+	rate /= 2;
+	rate /= spmf_mult();
+
+	return rate;
+}
+
+static long ips_to_ref(unsigned long rate)
+{
+	int ips_div = (clockctl->scfr1 >> 23) & 0x7;
+
+	rate *= ips_div;	/* csb_clk = ips_clk * ips_div */
+	rate *= 2;		/* sys_clk = csb_clk * 2 */
+	return sys_to_ref(rate);
+}
+
+static unsigned long devtree_getfreq(char *clockname)
+{
+	struct device_node *np;
+	const unsigned int *prop;
+	unsigned int val = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr");
+	if (np) {
+		prop = of_get_property(np, clockname, NULL);
+		if (prop)
+			val = *prop;
+	    of_node_put(np);
+	}
+	return val;
+}
+
+static void ref_clk_calc(struct clk *clk)
+{
+	unsigned long rate;
+
+	rate = devtree_getfreq("bus-frequency");
+	if (rate == 0) {
+		printk(KERN_ERR "No bus-frequency in dev tree\n");
+		clk->rate = 0;
+		return;
+	}
+	clk->rate = ips_to_ref(rate);
+}
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.calc = ref_clk_calc,
+};
+
+
+static void sys_clk_calc(struct clk *clk)
+{
+	clk->rate = ref_to_sys(ref_clk.rate);
+}
+
+static struct clk sys_clk = {
+	.name = "sys_clk",
+	.calc = sys_clk_calc,
+};
+
+static void diu_clk_calc(struct clk *clk)
+{
+	int diudiv_x_2 = clockctl->scfr1 & 0xff;
+	unsigned long rate;
+
+	rate = sys_clk.rate;
+
+	rate *= 2;
+	rate /= diudiv_x_2;
+
+	clk->rate = rate;
+}
+
+static void half_clk_calc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate / 2;
+}
+
+static void generic_div_clk_calc(struct clk *clk)
+{
+	int div = (clockctl->scfr1 >> clk->div_shift) & 0x7;
+
+	clk->rate = clk->parent->rate / div;
+}
+
+static void unity_clk_calc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate;
+}
+
+static struct clk csb_clk = {
+	.name = "csb_clk",
+	.calc = half_clk_calc,
+	.parent = &sys_clk,
+};
+
+static void e300_clk_calc(struct clk *clk)
+{
+	int spmf = (clockctl->spmr >> 16) & 0xf;
+	int ratex2 = clk->parent->rate * spmf;
+
+	clk->rate = ratex2 / 2;
+}
+
+static struct clk e300_clk = {
+	.name = "e300_clk",
+	.calc = e300_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk ips_clk = {
+	.name = "ips_clk",
+	.calc = generic_div_clk_calc,
+	.parent = &csb_clk,
+	.div_shift = 23,
+};
+
+/*
+ * Clocks controlled by SCCR1 (.reg = 0)
+ */
+static struct clk lpc_clk = {
+	.name = "lpc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 30,
+	.calc = generic_div_clk_calc,
+	.parent = &ips_clk,
+	.div_shift = 11,
+};
+
+static struct clk nfc_clk = {
+	.name = "nfc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 29,
+	.calc = generic_div_clk_calc,
+	.parent = &ips_clk,
+	.div_shift = 8,
+};
+
+static struct clk pata_clk = {
+	.name = "pata_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 28,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+/*
+ * PSC clocks (bits 27 - 16)
+ * are setup elsewhere
+ */
+
+static struct clk sata_clk = {
+	.name = "sata_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 14,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk fec_clk = {
+	.name = "fec_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 13,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk pci_clk = {
+	.name = "pci_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 11,
+	.calc = generic_div_clk_calc,
+	.parent = &csb_clk,
+	.div_shift = 20,
+};
+
+/*
+ * Clocks controlled by SCCR2 (.reg = 1)
+ */
+static struct clk diu_clk = {
+	.name = "diu_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 31,
+	.calc = diu_clk_calc,
+};
+
+static struct clk axe_clk = {
+	.name = "axe_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 30,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk usb1_clk = {
+	.name = "usb1_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 28,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk usb2_clk = {
+	.name = "usb2_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 27,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 26,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk mscan_clk = {
+	.name = "mscan_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 25,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk sdhc_clk = {
+	.name = "sdhc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 24,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk mbx_bus_clk = {
+	.name = "mbx_bus_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 22,
+	.calc = half_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk mbx_clk = {
+	.name = "mbx_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 21,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk mbx_3d_clk = {
+	.name = "mbx_3d_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 20,
+	.calc = generic_div_clk_calc,
+	.parent = &mbx_bus_clk,
+	.div_shift = 14,
+};
+
+static void psc_mclk_in_calc(struct clk *clk)
+{
+	clk->rate = devtree_getfreq("psc_mclk_in");
+	if (!clk->rate)
+		clk->rate = 25000000;
+}
+
+static struct clk psc_mclk_in = {
+	.name = "psc_mclk_in",
+	.calc = psc_mclk_in_calc,
+};
+
+static struct clk spdif_txclk = {
+	.name = "spdif_txclk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 23,
+};
+
+static struct clk spdif_rxclk = {
+	.name = "spdif_rxclk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 23,
+};
+
+static void ac97_clk_calc(struct clk *clk)
+{
+	/* ac97 bit clock is always 24.567 MHz */
+	clk->rate = 24567000;
+}
+
+static struct clk ac97_clk = {
+	.name = "ac97_clk_in",
+	.calc = ac97_clk_calc,
+};
+
+struct clk *rate_clks[] = {
+	&ref_clk,
+	&sys_clk,
+	&diu_clk,
+	&csb_clk,
+	&e300_clk,
+	&ips_clk,
+	&fec_clk,
+	&sata_clk,
+	&pata_clk,
+	&nfc_clk,
+	&lpc_clk,
+	&mbx_bus_clk,
+	&mbx_clk,
+	&mbx_3d_clk,
+	&axe_clk,
+	&usb1_clk,
+	&usb2_clk,
+	&i2c_clk,
+	&mscan_clk,
+	&sdhc_clk,
+	&pci_clk,
+	&psc_mclk_in,
+	&spdif_txclk,
+	&spdif_rxclk,
+	&ac97_clk,
+	NULL
+};
+
+static void rate_clk_init(struct clk *clk)
+{
+	if (clk->calc) {
+		clk->calc(clk);
+		clk->flags |= CLK_HAS_RATE;
+		clk_register(clk);
+	} else {
+		printk(KERN_WARNING
+		       "Could not initialize clk %s without a calc routine\n",
+		       clk->name);
+	}
+}
+
+static void rate_clks_init(void)
+{
+	struct clk **cpp, *clk;
+
+	cpp = rate_clks;
+	while ((clk = *cpp++))
+		rate_clk_init(clk);
+}
+
+/*
+ * There are two clk enable registers with 32 enable bits each
+ * psc clocks and device clocks are all stored in dev_clks
+ */
+struct clk dev_clks[2][32];
+
+/*
+ * Given a psc number return the dev_clk
+ * associated with it
+ */
+static struct clk *psc_dev_clk(int pscnum)
+{
+	int reg, bit;
+	struct clk *clk;
+
+	reg = 0;
+	bit = 27 - pscnum;
+
+	clk = &dev_clks[reg][bit];
+	clk->reg = 0;
+	clk->bit = bit;
+	return clk;
+}
+
+/*
+ * PSC clock rate calculation
+ */
+static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
+{
+	unsigned long mclk_src = sys_clk.rate;
+	unsigned long mclk_div;
+
+	/*
+	 * Can only change value of mclk divider
+	 * when the divider is disabled.
+	 *
+	 * Zero is not a valid divider so minimum
+	 * divider is 1
+	 *
+	 * disable/set divider/enable
+	 */
+	out_be32(&clockctl->pccr[pscnum], 0);
+	out_be32(&clockctl->pccr[pscnum], 0x00020000);
+	out_be32(&clockctl->pccr[pscnum], 0x00030000);
+
+	if (clockctl->pccr[pscnum] & 0x80) {
+		clk->rate = spdif_rxclk.rate;
+		return;
+	}
+
+	switch ((clockctl->pccr[pscnum] >> 14) & 0x3) {
+	case 0:
+		mclk_src = sys_clk.rate;
+		break;
+	case 1:
+		mclk_src = ref_clk.rate;
+		break;
+	case 2:
+		mclk_src = psc_mclk_in.rate;
+		break;
+	case 3:
+		mclk_src = spdif_txclk.rate;
+		break;
+	}
+
+	mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1;
+	clk->rate = mclk_src / mclk_div;
+}
+
+/*
+ * Find all psc nodes in device tree and assign a clock
+ * with name "psc%d_mclk" and dev pointing at the device
+ * returned from of_find_device_by_node
+ */
+static void psc_clks_init(void)
+{
+	struct device_node *np;
+	const u32 *cell_index;
+	struct of_device *ofdev;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+		cell_index = of_get_property(np, "cell-index", NULL);
+		if (cell_index) {
+			int pscnum = *cell_index;
+			struct clk *clk = psc_dev_clk(pscnum);
+
+			clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
+			ofdev = of_find_device_by_node(np);
+			clk->dev = &ofdev->dev;
+			/*
+			 * AC97 is special rate clock does
+			 * not go through normal path
+			 */
+			if (strcmp("ac97", np->name) == 0)
+				clk->rate = ac97_clk.rate;
+			else
+				psc_calc_rate(clk, pscnum, np);
+			sprintf(clk->name, "psc%d_mclk", pscnum);
+			clk_register(clk);
+			clk_enable(clk);
+		}
+	}
+}
+
+static struct clk_interface mpc5121_clk_functions = {
+	.clk_get		= mpc5121_clk_get,
+	.clk_enable		= mpc5121_clk_enable,
+	.clk_disable		= mpc5121_clk_disable,
+	.clk_get_rate		= mpc5121_clk_get_rate,
+	.clk_put		= mpc5121_clk_put,
+	.clk_round_rate		= mpc5121_clk_round_rate,
+	.clk_set_rate		= mpc5121_clk_set_rate,
+	.clk_set_parent		= NULL,
+	.clk_get_parent		= NULL,
+};
+
+static int
+mpc5121_clk_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+	if (np) {
+		clockctl = of_iomap(np, 0);
+		of_node_put(np);
+	}
+
+	if (!clockctl) {
+		printk(KERN_ERR "Could not map clock control registers\n");
+		return 0;
+	}
+
+	rate_clks_init();
+	psc_clks_init();
+
+	/* leave clockctl mapped forever */
+	/*iounmap(clockctl); */
+	DEBUG_CLK_DUMP();
+	clocks_initialized++;
+	clk_functions = mpc5121_clk_functions;
+	return 0;
+}
+
+
+arch_initcall(mpc5121_clk_init);
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 50bd3a319022..5ebf6939a697 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved.
  *
  * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
  *
@@ -15,7 +15,6 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>
@@ -23,65 +22,22 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 
-/**
- * 	mpc512x_find_ips_freq - Find the IPS bus frequency for a device
- * 	@node:	device node
- *
- * 	Returns IPS bus frequency, or 0 if the bus frequency cannot be found.
- */
-unsigned long
-mpc512x_find_ips_freq(struct device_node *node)
-{
-	struct device_node *np;
-	const unsigned int *p_ips_freq = NULL;
-
-	of_node_get(node);
-	while (node) {
-		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
-		if (p_ips_freq)
-			break;
-
-		np = of_get_parent(node);
-		of_node_put(node);
-		node = np;
-	}
-	if (node)
-		of_node_put(node);
-
-	return p_ips_freq ? *p_ips_freq : 0;
-}
-EXPORT_SYMBOL(mpc512x_find_ips_freq);
-
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .name = "soc", },
-	{ .name = "localbus", },
-	{},
-};
+#include "mpc512x.h"
+#include "mpc5121_ads.h"
 
-static void __init mpc5121_ads_declare_of_platform_devices(void)
+static void __init mpc5121_ads_setup_arch(void)
 {
-	/* Find every child of the SOC node and add it to of_platform */
-	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
-		printk(KERN_ERR __FILE__ ": "
-			"Error while probing of_platform bus\n");
+	printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
+	/*
+	 * cpld regs are needed early
+	 */
+	mpc5121_ads_cpld_map();
 }
 
 static void __init mpc5121_ads_init_IRQ(void)
 {
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-	of_node_put(np);
-
-	/*
-	 * Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
+	mpc512x_init_IRQ();
+	mpc5121_ads_cpld_pic_init();
 }
 
 /*
@@ -97,7 +53,8 @@ static int __init mpc5121_ads_probe(void)
 define_machine(mpc5121_ads) {
 	.name			= "MPC5121 ADS",
 	.probe			= mpc5121_ads_probe,
-	.init			= mpc5121_ads_declare_of_platform_devices,
+	.setup_arch		= mpc5121_ads_setup_arch,
+	.init			= mpc512x_declare_of_platform_devices,
 	.init_IRQ		= mpc5121_ads_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.h b/arch/powerpc/platforms/512x/mpc5121_ads.h
new file mode 100644
index 000000000000..662076cfee2f
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Prototypes for ADS5121 specific code
+ */
+
+#ifndef __MPC512ADS_H__
+#define __MPC512ADS_H__
+extern void __init mpc5121_ads_cpld_map(void);
+extern void __init mpc5121_ads_cpld_pic_init(void);
+#endif				/* __MPC512ADS_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
new file mode 100644
index 000000000000..a6ce80566625
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121ADS CPLD irq handling
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/prom.h>
+
+static struct device_node *cpld_pic_node;
+static struct irq_host *cpld_pic_host;
+
+/*
+ * Bits to ignore in the misc_status register
+ * 0x10 touch screen pendown is hard routed to irq1
+ * 0x02 pci status is read from pci status register
+ */
+#define MISC_IGNORE 0x12
+
+/*
+ * Nothing to ignore in pci status register
+ */
+#define PCI_IGNORE 0x00
+
+struct cpld_pic {
+	u8 pci_mask;
+	u8 pci_status;
+	u8 route;
+	u8 misc_mask;
+	u8 misc_status;
+	u8 misc_control;
+};
+
+static struct cpld_pic __iomem *cpld_regs;
+
+static void __iomem *
+irq_to_pic_mask(unsigned int irq)
+{
+	return irq <= 7 ? &cpld_regs->pci_mask : &cpld_regs->misc_mask;
+}
+
+static unsigned int
+irq_to_pic_bit(unsigned int irq)
+{
+	return 1 << (irq & 0x7);
+}
+
+static void
+cpld_mask_irq(unsigned int irq)
+{
+	unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) | irq_to_pic_bit(cpld_irq));
+}
+
+static void
+cpld_unmask_irq(unsigned int irq)
+{
+	unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) & ~irq_to_pic_bit(cpld_irq));
+}
+
+static struct irq_chip cpld_pic = {
+	.typename = " CPLD PIC ",
+	.mask = cpld_mask_irq,
+	.ack = cpld_mask_irq,
+	.unmask = cpld_unmask_irq,
+};
+
+static int
+cpld_pic_get_irq(int offset, u8 ignore, u8 __iomem *statusp,
+			    u8 __iomem *maskp)
+{
+	int cpld_irq;
+	u8 status = in_8(statusp);
+	u8 mask = in_8(maskp);
+
+	/* ignore don't cares and masked irqs */
+	status |= (ignore | mask);
+
+	if (status == 0xff)
+		return NO_IRQ_IGNORE;
+
+	cpld_irq = ffz(status) + offset;
+
+	return irq_linear_revmap(cpld_pic_host, cpld_irq);
+}
+
+static void
+cpld_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	irq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status,
+		&cpld_regs->pci_mask);
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+		generic_handle_irq(irq);
+		return;
+	}
+
+	irq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status,
+		&cpld_regs->misc_mask);
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+		generic_handle_irq(irq);
+		return;
+	}
+}
+
+static int
+cpld_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+	return cpld_pic_node == node;
+}
+
+static int
+cpld_pic_host_map(struct irq_host *h, unsigned int virq,
+			     irq_hw_number_t hw)
+{
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq);
+	return 0;
+}
+
+static struct
+irq_host_ops cpld_pic_host_ops = {
+	.match = cpld_pic_host_match,
+	.map = cpld_pic_host_map,
+};
+
+void __init
+mpc5121_ads_cpld_map(void)
+{
+	struct device_node *np = NULL;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	cpld_regs = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+void __init
+mpc5121_ads_cpld_pic_init(void)
+{
+	unsigned int cascade_irq;
+	struct device_node *np = NULL;
+
+	pr_debug("cpld_ic_init\n");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	if (!cpld_regs)
+		goto end;
+
+	cascade_irq = irq_of_parse_and_map(np, 0);
+	if (cascade_irq == NO_IRQ)
+		goto end;
+
+	/*
+	 * statically route touch screen pendown through 1
+	 * and ignore it here
+	 * route all others through our cascade irq
+	 */
+	out_8(&cpld_regs->route, 0xfd);
+	out_8(&cpld_regs->pci_mask, 0xff);
+	/* unmask pci ints in misc mask */
+	out_8(&cpld_regs->misc_mask, ~(MISC_IGNORE));
+
+	cpld_pic_node = of_node_get(np);
+
+	cpld_pic_host =
+	    irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 16, &cpld_pic_host_ops, 16);
+	if (!cpld_pic_host) {
+		printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n");
+		goto end;
+	}
+
+	set_irq_chained_handler(cascade_irq, cpld_pic_cascade);
+end:
+	of_node_put(np);
+}
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
new file mode 100644
index 000000000000..2479de9e2d12
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121 SoC setup
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+/*
+ * list of supported boards
+ */
+static char *board[] __initdata = {
+	"prt,prtlvt",
+	NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5121_generic_probe(void)
+{
+	unsigned long node = of_get_flat_dt_root();
+	int i = 0;
+
+	while (board[i]) {
+		if (of_flat_dt_is_compatible(node, board[i]))
+			break;
+		i++;
+	}
+
+	return board[i] != NULL;
+}
+
+define_machine(mpc5121_generic) {
+	.name			= "MPC5121 generic",
+	.probe			= mpc5121_generic_probe,
+	.init			= mpc512x_declare_of_platform_devices,
+	.init_IRQ		= mpc512x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
new file mode 100644
index 000000000000..9c03693cb009
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Prototypes for MPC512x shared code
+ */
+
+#ifndef __MPC512X_H__
+#define __MPC512X_H__
+extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+extern void __init mpc512x_init_IRQ(void);
+void __init mpc512x_declare_of_platform_devices(void);
+#endif				/* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
new file mode 100644
index 000000000000..d8cd579f3191
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC512x Shared code
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+unsigned long
+mpc512x_find_ips_freq(struct device_node *node)
+{
+	struct device_node *np;
+	const unsigned int *p_ips_freq = NULL;
+
+	of_node_get(node);
+	while (node) {
+		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
+		if (p_ips_freq)
+			break;
+
+		np = of_get_parent(node);
+		of_node_put(node);
+		node = np;
+	}
+	if (node)
+		of_node_put(node);
+
+	return p_ips_freq ? *p_ips_freq : 0;
+}
+EXPORT_SYMBOL(mpc512x_find_ips_freq);
+
+void __init mpc512x_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+	of_node_put(np);
+
+	/*
+	 * Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+/*
+ * Nodes to do bus probe on, soc and localbus
+ */
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .compatible = "fsl,mpc5121-immr", },
+	{ .compatible = "fsl,mpc5121-localbus", },
+	{},
+};
+
+void __init mpc512x_declare_of_platform_devices(void)
+{
+	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
+		printk(KERN_ERR __FILE__ ": "
+			"Error while probing of_platform bus\n");
+}
+
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index acd2fc8cf492..696a5ee4962d 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,8 +1,8 @@
 config PPC_MPC52xx
 	bool "52xx-based boards"
 	depends on PPC_MULTIPLATFORM && PPC32
-	select FSL_SOC
 	select PPC_CLOCK
+	select PPC_PCI_CHOICE
 
 config PPC_MPC5200_SIMPLE
 	bool "Generic support for simple MPC5200 based boards"
@@ -47,6 +47,7 @@ config PPC_MPC5200_BUGFIX
 config PPC_MPC5200_GPIO
 	bool "MPC5200 GPIO support"
 	depends on PPC_MPC52xx
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
 	help
 	  Enable gpiolib support for mpc5200 based boards
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index e3428ddd9040..5a382bb15f62 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -63,6 +63,7 @@
 
 #define MPC52xx_PCI_TCR_P		0x01000000
 #define MPC52xx_PCI_TCR_LD		0x00010000
+#define MPC52xx_PCI_TCR_WCT8		0x00000008
 
 #define MPC52xx_PCI_TBATR_DISABLE	0x0
 #define MPC52xx_PCI_TBATR_ENABLE	0x1
@@ -313,7 +314,7 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 	out_be32(&pci_regs->tbatr1,
 		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
 
-	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
+	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8);
 
 	tmp = in_be32(&pci_regs->gscr);
 #if 0
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 917ac8891555..75eb1ede5497 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -1,7 +1,8 @@
-choice
-	prompt "82xx Board Type"
-	depends on PPC_82xx
-	default MPC8272_ADS
+menuconfig PPC_82xx
+	bool "82xx-based boards (PQ II)"
+	depends on 6xx && PPC_MULTIPLATFORM
+
+if PPC_82xx
 
 config MPC8272_ADS
 	bool "Freescale MPC8272 ADS"
@@ -29,6 +30,7 @@ config EP8248E
 	select 8272
 	select 8260
 	select FSL_SOC
+	select PHYLIB
 	select MDIO_BITBANG
 	help
 	  This enables support for the Embedded Planet EP8248E board.
@@ -36,7 +38,7 @@ config EP8248E
 	  This board is also resold by Freescale as the QUICCStart
 	  MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
 
-endchoice
+endif
 
 config PQ2ADS
 	bool
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 7d3018751988..8054c685d323 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -96,6 +96,10 @@ static struct cpm_pin mpc8272_ads_pins[] = {
 	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* I2C */
+	{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+	{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index a8013816125c..9876d7e072f4 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -109,7 +109,7 @@ static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
 {
 	get_irq_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_data(virq, h->host_data);
-	set_irq_chip(virq, &pq2ads_pci_ic);
+	set_irq_chip_and_handler(virq, &pq2ads_pci_ic, handle_level_irq);
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 13587e2e8680..6159c5d4e5f1 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -1,10 +1,13 @@
-menuconfig MPC83xx
-	bool "83xx Board Type"
-	depends on PPC_83xx
+menuconfig PPC_83xx
+	bool "83xx-based boards"
+	depends on 6xx && PPC_MULTIPLATFORM
 	select PPC_UDBG_16550
-	select PPC_INDIRECT_PCI
+	select PPC_PCI_CHOICE
+	select FSL_PCI if PCI
+	select FSL_SOC
+	select IPIC
 
-if MPC83xx
+if PPC_83xx
 
 config MPC831x_RDB
 	bool "Freescale MPC831x RDB"
@@ -58,6 +61,17 @@ config MPC836x_MDS
 	help
 	  This option enables support for the MPC836x MDS Processor Board.
 
+config MPC836x_RDK
+	bool "Freescale/Logic MPC836x RDK"
+	select DEFAULT_UIMAGE
+	select QUICC_ENGINE
+	select QE_GPIO
+	select FSL_GTM
+	select FSL_LBC
+	help
+	  This option enables support for the MPC836x RDK Processor Board,
+	  also known as ZOOM PowerQUICC Kit.
+
 config MPC837x_MDS
 	bool "Freescale MPC837x MDS"
 	select DEFAULT_UIMAGE
@@ -79,6 +93,15 @@ config SBC834x
 	help
 	  This option enables support for the Wind River SBC834x board.
 
+config ASP834x
+	bool "Analogue & Micro ASP 834x"
+	select PPC_MPC834x
+	select REDBOOT
+	help
+	  This enables support for the Analogue & Micro ASP 83xx
+	  board.
+
+
 endif
 
 # used for usb
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 7e6dd3e259d8..ba5028e29890 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -2,13 +2,15 @@
 # Makefile for the PowerPC 83xx linux kernel.
 #
 obj-y				:= misc.o usb.o
-obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
 obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
 obj-$(CONFIG_MPC836x_MDS)	+= mpc836x_mds.o
+obj-$(CONFIG_MPC836x_RDK)	+= mpc836x_rdk.o
 obj-$(CONFIG_MPC832x_MDS)	+= mpc832x_mds.o
 obj-$(CONFIG_MPC837x_MDS)	+= mpc837x_mds.o
 obj-$(CONFIG_SBC834x)		+= sbc834x.o
 obj-$(CONFIG_MPC837x_RDB)	+= mpc837x_rdb.o
+obj-$(CONFIG_ASP834x)		+= asp834x.o
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
new file mode 100644
index 000000000000..bb30d67ad0a2
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -0,0 +1,90 @@
+/*
+ * arch/powerpc/platforms/83xx/asp834x.c
+ *
+ * Analogue & Micro ASP8347 board specific routines
+ * clone of mpc834x_itx
+ *
+ * Copyright 2008 Codehermit
+ *
+ * Maintainer: Bryan O'Donoghue <bodonoghue@codhermit.ie>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+
+#include "mpc83xx.h"
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init asp834x_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("asp834x_setup_arch()", 0);
+
+	mpc834x_usb_cfg();
+}
+
+static void __init asp834x_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	of_node_put(np);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+static struct __initdata of_device_id asp8347_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init asp8347_declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, asp8347_ids, NULL);
+	return 0;
+}
+machine_device_initcall(asp834x, asp8347_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init asp834x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "analogue-and-micro,asp8347e");
+}
+
+define_machine(asp834x) {
+	.name			= "ASP8347E",
+	.probe			= asp834x_probe,
+	.setup_arch		= asp834x_setup_arch,
+	.init_IRQ		= asp834x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index c4db5172b27a..a428f8d1ac80 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -19,6 +19,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 6dbc6eabcb02..dd4be4aee314 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -36,6 +36,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index e7f706b624fe..f049d692d4c8 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -27,6 +27,7 @@
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 50e8f632061c..7301d77a08ee 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 2b8a0a3f8557..30d509aa9f08 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index c2e5de60c055..75b80e836576 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -42,6 +42,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
new file mode 100644
index 000000000000..a5273bb28e1b
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -0,0 +1,103 @@
+/*
+ * MPC8360E-RDK board file.
+ *
+ * Copyright (c) 2006  Freescale Semicondutor, Inc.
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+static struct of_device_id __initdata mpc836x_rdk_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init mpc836x_rdk_declare_of_platform_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
+}
+machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices);
+
+static void __init mpc836x_rdk_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+		mpc83xx_add_bridge(np);
+#endif
+
+	qe_reset();
+}
+
+static void __init mpc836x_rdk_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/*
+	 * Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+	of_node_put(np);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np)
+		return;
+
+	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+	of_node_put(np);
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened.
+ */
+static int __init mpc836x_rdk_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,mpc8360rdk");
+}
+
+define_machine(mpc836x_rdk) {
+	.name		= "MPC836x RDK",
+	.probe		= mpc836x_rdk_probe,
+	.setup_arch	= mpc836x_rdk_setup_arch,
+	.init_IRQ	= mpc836x_rdk_init_IRQ,
+	.get_irq	= ipic_get_irq,
+	.restart	= mpc83xx_restart,
+	.time_init	= mpc83xx_time_init,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 64d17b0d6455..be62de23bead 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -19,6 +19,7 @@
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <asm/prom.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index c00356bdb1dd..da030afa2e2c 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -17,6 +17,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 88a3b5cabb18..2a7cbabb410a 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -26,6 +26,8 @@
 #define MPC834X_SICRL_USB1         0x20000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
+#define MPC8315_SICRL_USB_MASK     0x000000fc
+#define MPC8315_SICRL_USB_ULPI     0x00000054
 #define MPC837X_SICRL_USB_MASK     0xf0000000
 #define MPC837X_SICRL_USB_ULPI     0x50000000
 
@@ -34,6 +36,8 @@
 #define MPC834X_SICRH_USB_UTMI     0x00020000
 #define MPC831X_SICRH_USB_MASK     0x000000e0
 #define MPC831X_SICRH_USB_ULPI     0x000000a0
+#define MPC8315_SICRH_USB_MASK     0x0000ff00
+#define MPC8315_SICRH_USB_ULPI     0x00000000
 
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500
@@ -55,7 +59,6 @@
  * mpc83xx_* files. Mostly for use by mpc83xx_setup
  */
 
-extern int mpc83xx_add_bridge(struct device_node *dev);
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
 extern int mpc834x_usb_cfg(void);
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
deleted file mode 100644
index 14f1080c6c9d..000000000000
--- a/arch/powerpc/platforms/83xx/pci.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * FSL SoC setup code
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-int __init mpc83xx_add_bridge(struct device_node *dev)
-{
-	int len;
-	struct pci_controller *hose;
-	struct resource rsrc;
-	const int *bus_range;
-	int primary = 1, has_address = 0;
-	phys_addr_t immr = get_immrbase();
-
-	DBG("Adding PCI host bridge %s\n", dev->full_name);
-
-	/* Fetch host bridge registers address */
-	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
-
-	/* Get bus range if any */
-	bus_range = of_get_property(dev, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, assume"
-		       " bus 0\n", dev->full_name);
-	}
-
-	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
-	hose = pcibios_alloc_controller(dev);
-	if (!hose)
-		return -ENOMEM;
-
-	hose->first_busno = bus_range ? bus_range[0] : 0;
-	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-	/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
-	 * the other at 0x8600, we consider the 0x8500 the primary controller
-	 */
-	/* PCI 1 */
-	if ((rsrc.start & 0xfffff) == 0x8500) {
-		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
-	}
-	/* PCI 2 */
-	if ((rsrc.start & 0xfffff) == 0x8600) {
-		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
-		primary = 0;
-	}
-
-	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
-	       "Firmware bus number: %d->%d\n",
-	       (unsigned long long)rsrc.start, hose->first_busno,
-	       hose->last_busno);
-
-	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-	    hose, hose->cfg_addr, hose->cfg_data);
-
-	/* Interpret the "ranges" property */
-	/* This also maps the I/O region and sets isa_io/mem_base */
-	pci_process_bridge_OF_ranges(hose, dev, primary);
-
-	return 0;
-}
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index cf382474a83d..fc21f5c15bab 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -37,6 +37,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S
new file mode 100644
index 000000000000..1930543c98d3
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -0,0 +1,533 @@
+/*
+ * Enter and leave deep sleep state on MPC83xx
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+
+#define SS_MEMSAVE	0x00 /* First 8 bytes of RAM */
+#define SS_HID		0x08 /* 3 HIDs */
+#define SS_IABR		0x14 /* 2 IABRs */
+#define SS_IBCR		0x1c
+#define SS_DABR		0x20 /* 2 DABRs */
+#define SS_DBCR		0x28
+#define SS_SP		0x2c
+#define SS_SR		0x30 /* 16 segment registers */
+#define SS_R2		0x70
+#define SS_MSR		0x74
+#define SS_SDR1		0x78
+#define SS_LR		0x7c
+#define SS_SPRG		0x80 /* 4 SPRGs */
+#define SS_DBAT		0x90 /* 8 DBATs */
+#define SS_IBAT		0xd0 /* 8 IBATs */
+#define SS_TB		0x110
+#define SS_CR		0x118
+#define SS_GPREG	0x11c /* r12-r31 */
+#define STATE_SAVE_SIZE 0x16c
+
+	.section .data
+	.align	5
+
+mpc83xx_sleep_save_area:
+	.space	STATE_SAVE_SIZE
+immrbase:
+	.long	0
+
+	.section .text
+	.align	5
+
+	/* r3 = physical address of IMMR */
+_GLOBAL(mpc83xx_enter_deep_sleep)
+	lis	r4, immrbase@ha
+	stw	r3, immrbase@l(r4)
+
+	/* The first 2 words of memory are used to communicate with the
+	 * bootloader, to tell it how to resume.
+	 *
+	 * The first word is the magic number 0xf5153ae5, and the second
+	 * is the pointer to mpc83xx_deep_resume.
+	 *
+	 * The original content of these two words is saved in SS_MEMSAVE.
+	 */
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+
+	lis	r4, KERNELBASE@h
+	lwz	r5, 0(r4)
+	lwz	r6, 4(r4)
+
+	stw	r5, SS_MEMSAVE+0(r3)
+	stw	r6, SS_MEMSAVE+4(r3)
+
+	mfspr	r5, SPRN_HID0
+	mfspr	r6, SPRN_HID1
+	mfspr	r7, SPRN_HID2
+
+	stw	r5, SS_HID+0(r3)
+	stw	r6, SS_HID+4(r3)
+	stw	r7, SS_HID+8(r3)
+
+	mfspr	r4, SPRN_IABR
+	mfspr	r5, SPRN_IABR2
+	mfspr	r6, SPRN_IBCR
+	mfspr	r7, SPRN_DABR
+	mfspr	r8, SPRN_DABR2
+	mfspr	r9, SPRN_DBCR
+
+	stw	r4, SS_IABR+0(r3)
+	stw	r5, SS_IABR+4(r3)
+	stw	r6, SS_IBCR(r3)
+	stw	r7, SS_DABR+0(r3)
+	stw	r8, SS_DABR+4(r3)
+	stw	r9, SS_DBCR(r3)
+
+	mfspr	r4, SPRN_SPRG0
+	mfspr	r5, SPRN_SPRG1
+	mfspr	r6, SPRN_SPRG2
+	mfspr	r7, SPRN_SPRG3
+	mfsdr1	r8
+
+	stw	r4, SS_SPRG+0(r3)
+	stw	r5, SS_SPRG+4(r3)
+	stw	r6, SS_SPRG+8(r3)
+	stw	r7, SS_SPRG+12(r3)
+	stw	r8, SS_SDR1(r3)
+
+	mfspr	r4, SPRN_DBAT0U
+	mfspr	r5, SPRN_DBAT0L
+	mfspr	r6, SPRN_DBAT1U
+	mfspr	r7, SPRN_DBAT1L
+
+	stw	r4, SS_DBAT+0x00(r3)
+	stw	r5, SS_DBAT+0x04(r3)
+	stw	r6, SS_DBAT+0x08(r3)
+	stw	r7, SS_DBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_DBAT2U
+	mfspr	r5, SPRN_DBAT2L
+	mfspr	r6, SPRN_DBAT3U
+	mfspr	r7, SPRN_DBAT3L
+
+	stw	r4, SS_DBAT+0x10(r3)
+	stw	r5, SS_DBAT+0x14(r3)
+	stw	r6, SS_DBAT+0x18(r3)
+	stw	r7, SS_DBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_DBAT4U
+	mfspr	r5, SPRN_DBAT4L
+	mfspr	r6, SPRN_DBAT5U
+	mfspr	r7, SPRN_DBAT5L
+
+	stw	r4, SS_DBAT+0x20(r3)
+	stw	r5, SS_DBAT+0x24(r3)
+	stw	r6, SS_DBAT+0x28(r3)
+	stw	r7, SS_DBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_DBAT6U
+	mfspr	r5, SPRN_DBAT6L
+	mfspr	r6, SPRN_DBAT7U
+	mfspr	r7, SPRN_DBAT7L
+
+	stw	r4, SS_DBAT+0x30(r3)
+	stw	r5, SS_DBAT+0x34(r3)
+	stw	r6, SS_DBAT+0x38(r3)
+	stw	r7, SS_DBAT+0x3c(r3)
+
+	mfspr	r4, SPRN_IBAT0U
+	mfspr	r5, SPRN_IBAT0L
+	mfspr	r6, SPRN_IBAT1U
+	mfspr	r7, SPRN_IBAT1L
+
+	stw	r4, SS_IBAT+0x00(r3)
+	stw	r5, SS_IBAT+0x04(r3)
+	stw	r6, SS_IBAT+0x08(r3)
+	stw	r7, SS_IBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_IBAT2U
+	mfspr	r5, SPRN_IBAT2L
+	mfspr	r6, SPRN_IBAT3U
+	mfspr	r7, SPRN_IBAT3L
+
+	stw	r4, SS_IBAT+0x10(r3)
+	stw	r5, SS_IBAT+0x14(r3)
+	stw	r6, SS_IBAT+0x18(r3)
+	stw	r7, SS_IBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_IBAT4U
+	mfspr	r5, SPRN_IBAT4L
+	mfspr	r6, SPRN_IBAT5U
+	mfspr	r7, SPRN_IBAT5L
+
+	stw	r4, SS_IBAT+0x20(r3)
+	stw	r5, SS_IBAT+0x24(r3)
+	stw	r6, SS_IBAT+0x28(r3)
+	stw	r7, SS_IBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_IBAT6U
+	mfspr	r5, SPRN_IBAT6L
+	mfspr	r6, SPRN_IBAT7U
+	mfspr	r7, SPRN_IBAT7L
+
+	stw	r4, SS_IBAT+0x30(r3)
+	stw	r5, SS_IBAT+0x34(r3)
+	stw	r6, SS_IBAT+0x38(r3)
+	stw	r7, SS_IBAT+0x3c(r3)
+
+	mfmsr	r4
+	mflr	r5
+	mfcr	r6
+
+	stw	r4, SS_MSR(r3)
+	stw	r5, SS_LR(r3)
+	stw	r6, SS_CR(r3)
+	stw	r1, SS_SP(r3)
+	stw	r2, SS_R2(r3)
+
+1:	mftbu	r4
+	mftb	r5
+	mftbu	r6
+	cmpw	r4, r6
+	bne	1b
+
+	stw	r4, SS_TB+0(r3)
+	stw	r5, SS_TB+4(r3)
+
+	stmw	r12, SS_GPREG(r3)
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	mfsrin	r5, r4
+	stwu	r5, 4(r6)
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	/* Disable machine checks and critical exceptions */
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~MSR_CE
+	rlwinm	r4, r4, 0, ~MSR_ME
+	mtmsr	r4
+	isync
+
+#define TMP_VIRT_IMMR		0xf0000000
+#define DEFAULT_IMMR_VALUE	0xff400000
+#define IMMRBAR_BASE		0x0000
+
+	lis	r4, immrbase@ha
+	lwz	r4, immrbase@l(r4)
+
+	/* Use DBAT0 to address the current IMMR space */
+
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT0L, r4
+	lis	r8, TMP_VIRT_IMMR@h
+	ori	r4, r8, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT0U, r4
+	isync
+
+	/* Use DBAT1 to address the original IMMR space */
+
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT1L, r4
+	lis	r9, (TMP_VIRT_IMMR + 0x01000000)@h
+	ori	r4, r9, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT1U, r4
+	isync
+
+	/* Use DBAT2 to address the beginning of RAM.  This isn't done
+	 * using the normal virtual mapping, because with page debugging
+	 * enabled it will be read-only.
+	 */
+
+	li	r4, 0x0002
+	mtspr	SPRN_DBAT2L, r4
+	lis	r4, KERNELBASE@h
+	ori	r4, r4, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT2U, r4
+	isync
+
+	/* Flush the cache with our BAT, as there will be TLB misses
+	 * otherwise if page debugging is enabled, and these misses
+	 * will disturb the PLRU algorithm.
+	 */
+
+	bl	__flush_disable_L1
+
+	/* Keep the i-cache enabled, so the hack below for low-boot
+	 * flash will work.
+	 */
+	mfspr	r3, SPRN_HID0
+	ori	r3, r3, HID0_ICE
+	mtspr	SPRN_HID0, r3
+	isync
+
+	lis	r6, 0xf515
+	ori	r6, r6, 0x3ae5
+
+	lis	r7, mpc83xx_deep_resume@h
+	ori	r7, r7, mpc83xx_deep_resume@l
+	tophys(r7, r7)
+
+	lis	r5, KERNELBASE@h
+	stw	r6, 0(r5)
+	stw	r7, 4(r5)
+
+	/* Reset BARs */
+
+	li	r4, 0
+	stw	r4, 0x0024(r8)
+	stw	r4, 0x002c(r8)
+	stw	r4, 0x0034(r8)
+	stw	r4, 0x003c(r8)
+	stw	r4, 0x0064(r8)
+	stw	r4, 0x006c(r8)
+
+	/* Rev 1 of the 8313 has problems with wakeup events that are
+	 * pending during the transition to deep sleep state (such as if
+	 * the PCI host sets the state to D3 and then D0 in rapid
+	 * succession).  This check shrinks the race window somewhat.
+	 *
+	 * See erratum PCI23, though the problem is not limited
+	 * to PCI.
+	 */
+
+	lwz	r3, 0x0b04(r8)
+	andi.	r3, r3, 1
+	bne-	mpc83xx_deep_resume
+
+	/* Move IMMR back to the default location, following the
+	 * procedure specified in the MPC8313 manual.
+	 */
+	lwz	r4, IMMRBAR_BASE(r8)
+	isync
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	stw	r4, IMMRBAR_BASE(r8)
+	lis	r4, KERNELBASE@h
+	lwz	r4, 0(r4)
+	isync
+	lwz	r4, IMMRBAR_BASE(r9)
+	mr	r8, r9
+	isync
+
+	/* Check the Reset Configuration Word to see whether flash needs
+	 * to be mapped at a low address or a high address.
+	 */
+
+	lwz	r4, 0x0904(r8)
+	andis.	r4, r4, 0x0400
+	li	r4, 0
+	beq	boot_low
+	lis	r4, 0xff80
+boot_low:
+	stw	r4, 0x0020(r8)
+	lis	r7, 0x8000
+	ori	r7, r7, 0x0016
+
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+	oris	r5, r5, HID0_SLEEP@h
+	mtspr	SPRN_HID0, r5
+	isync
+
+	mfmsr	r5
+	oris	r5, r5, MSR_POW@h
+
+	/* Enable the flash mapping at the appropriate address.  This
+	 * mapping will override the RAM mapping if booting low, so there's
+	 * no need to disable the latter.  This must be done inside the same
+	 * cache line as setting MSR_POW, so that no instruction fetches
+	 * from RAM happen after the flash mapping is turned on.
+	 */
+
+	.align	5
+	stw	r7, 0x0024(r8)
+	sync
+	isync
+	mtmsr	r5
+	isync
+1:	b	1b
+
+mpc83xx_deep_resume:
+	lis	r4, 1f@h
+	ori	r4, r4, 1f@l
+	tophys(r4, r4)
+	mtsrr0	r4
+
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~(MSR_IR | MSR_DR)
+	mtsrr1	r4
+
+	rfi
+
+1:	tlbia
+	bl	__inval_enable_L1
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+	tophys(r3, r3)
+
+	lwz	r5, SS_MEMSAVE+0(r3)
+	lwz	r6, SS_MEMSAVE+4(r3)
+
+	stw	r5, 0(0)
+	stw	r6, 4(0)
+
+	lwz	r5, SS_HID+0(r3)
+	lwz	r6, SS_HID+4(r3)
+	lwz	r7, SS_HID+8(r3)
+
+	mtspr	SPRN_HID0, r5
+	mtspr	SPRN_HID1, r6
+	mtspr	SPRN_HID2, r7
+
+	lwz	r4, SS_IABR+0(r3)
+	lwz	r5, SS_IABR+4(r3)
+	lwz	r6, SS_IBCR(r3)
+	lwz	r7, SS_DABR+0(r3)
+	lwz	r8, SS_DABR+4(r3)
+	lwz	r9, SS_DBCR(r3)
+
+	mtspr	SPRN_IABR, r4
+	mtspr	SPRN_IABR2, r5
+	mtspr	SPRN_IBCR, r6
+	mtspr	SPRN_DABR, r7
+	mtspr	SPRN_DABR2, r8
+	mtspr	SPRN_DBCR, r9
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	lwzu	r5, 4(r6)
+	mtsrin	r5, r4
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	lwz	r4, SS_DBAT+0x00(r3)
+	lwz	r5, SS_DBAT+0x04(r3)
+	lwz	r6, SS_DBAT+0x08(r3)
+	lwz	r7, SS_DBAT+0x0c(r3)
+
+	mtspr	SPRN_DBAT0U, r4
+	mtspr	SPRN_DBAT0L, r5
+	mtspr	SPRN_DBAT1U, r6
+	mtspr	SPRN_DBAT1L, r7
+
+	lwz	r4, SS_DBAT+0x10(r3)
+	lwz	r5, SS_DBAT+0x14(r3)
+	lwz	r6, SS_DBAT+0x18(r3)
+	lwz	r7, SS_DBAT+0x1c(r3)
+
+	mtspr	SPRN_DBAT2U, r4
+	mtspr	SPRN_DBAT2L, r5
+	mtspr	SPRN_DBAT3U, r6
+	mtspr	SPRN_DBAT3L, r7
+
+	lwz	r4, SS_DBAT+0x20(r3)
+	lwz	r5, SS_DBAT+0x24(r3)
+	lwz	r6, SS_DBAT+0x28(r3)
+	lwz	r7, SS_DBAT+0x2c(r3)
+
+	mtspr	SPRN_DBAT4U, r4
+	mtspr	SPRN_DBAT4L, r5
+	mtspr	SPRN_DBAT5U, r6
+	mtspr	SPRN_DBAT5L, r7
+
+	lwz	r4, SS_DBAT+0x30(r3)
+	lwz	r5, SS_DBAT+0x34(r3)
+	lwz	r6, SS_DBAT+0x38(r3)
+	lwz	r7, SS_DBAT+0x3c(r3)
+
+	mtspr	SPRN_DBAT6U, r4
+	mtspr	SPRN_DBAT6L, r5
+	mtspr	SPRN_DBAT7U, r6
+	mtspr	SPRN_DBAT7L, r7
+
+	lwz	r4, SS_IBAT+0x00(r3)
+	lwz	r5, SS_IBAT+0x04(r3)
+	lwz	r6, SS_IBAT+0x08(r3)
+	lwz	r7, SS_IBAT+0x0c(r3)
+
+	mtspr	SPRN_IBAT0U, r4
+	mtspr	SPRN_IBAT0L, r5
+	mtspr	SPRN_IBAT1U, r6
+	mtspr	SPRN_IBAT1L, r7
+
+	lwz	r4, SS_IBAT+0x10(r3)
+	lwz	r5, SS_IBAT+0x14(r3)
+	lwz	r6, SS_IBAT+0x18(r3)
+	lwz	r7, SS_IBAT+0x1c(r3)
+
+	mtspr	SPRN_IBAT2U, r4
+	mtspr	SPRN_IBAT2L, r5
+	mtspr	SPRN_IBAT3U, r6
+	mtspr	SPRN_IBAT3L, r7
+
+	lwz	r4, SS_IBAT+0x20(r3)
+	lwz	r5, SS_IBAT+0x24(r3)
+	lwz	r6, SS_IBAT+0x28(r3)
+	lwz	r7, SS_IBAT+0x2c(r3)
+
+	mtspr	SPRN_IBAT4U, r4
+	mtspr	SPRN_IBAT4L, r5
+	mtspr	SPRN_IBAT5U, r6
+	mtspr	SPRN_IBAT5L, r7
+
+	lwz	r4, SS_IBAT+0x30(r3)
+	lwz	r5, SS_IBAT+0x34(r3)
+	lwz	r6, SS_IBAT+0x38(r3)
+	lwz	r7, SS_IBAT+0x3c(r3)
+
+	mtspr	SPRN_IBAT6U, r4
+	mtspr	SPRN_IBAT6L, r5
+	mtspr	SPRN_IBAT7U, r6
+	mtspr	SPRN_IBAT7L, r7
+
+	lwz	r4, SS_SPRG+0(r3)
+	lwz	r5, SS_SPRG+4(r3)
+	lwz	r6, SS_SPRG+8(r3)
+	lwz	r7, SS_SPRG+12(r3)
+	lwz	r8, SS_SDR1(r3)
+
+	mtspr	SPRN_SPRG0, r4
+	mtspr	SPRN_SPRG1, r5
+	mtspr	SPRN_SPRG2, r6
+	mtspr	SPRN_SPRG3, r7
+	mtsdr1	r8
+
+	lwz	r4, SS_MSR(r3)
+	lwz	r5, SS_LR(r3)
+	lwz	r6, SS_CR(r3)
+	lwz	r1, SS_SP(r3)
+	lwz	r2, SS_R2(r3)
+
+	mtsrr1	r4
+	mtsrr0	r5
+	mtcr	r6
+
+	li	r4, 0
+	mtspr	SPRN_TBWL, r4
+
+	lwz	r4, SS_TB+0(r3)
+	lwz	r5, SS_TB+4(r3)
+
+	mtspr	SPRN_TBWU, r4
+	mtspr	SPRN_TBWL, r5
+
+	lmw	r12, SS_GPREG(r3)
+
+	/* Kick decrementer */
+	li	r0, 1
+	mtdec	r0
+
+	rfi
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
new file mode 100644
index 000000000000..08e65fc8b98c
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -0,0 +1,388 @@
+/*
+ * MPC83xx suspend support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/suspend.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mpc6xx.h>
+
+#include <sysdev/fsl_soc.h>
+
+#define PMCCR1_NEXT_STATE       0x0C /* Next state for power management */
+#define PMCCR1_NEXT_STATE_SHIFT 2
+#define PMCCR1_CURR_STATE       0x03 /* Current state for power management*/
+#define IMMR_RCW_OFFSET         0x900
+#define RCW_PCI_HOST            0x80000000
+
+void mpc83xx_enter_deep_sleep(phys_addr_t immrbase);
+
+struct mpc83xx_pmc {
+	u32 config;
+#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */
+#define PMCCR_SLPEN 1 /* System low power enable */
+
+	u32 event;
+	u32 mask;
+/* All but PMCI are deep-sleep only */
+#define PMCER_GPIO   0x100
+#define PMCER_PCI    0x080
+#define PMCER_USB    0x040
+#define PMCER_ETSEC1 0x020
+#define PMCER_ETSEC2 0x010
+#define PMCER_TIMER  0x008
+#define PMCER_INT1   0x004
+#define PMCER_INT2   0x002
+#define PMCER_PMCI   0x001
+#define PMCER_ALL    0x1FF
+
+	/* deep-sleep only */
+	u32 config1;
+#define PMCCR1_USE_STATE  0x80000000
+#define PMCCR1_PME_EN     0x00000080
+#define PMCCR1_ASSERT_PME 0x00000040
+#define PMCCR1_POWER_OFF  0x00000020
+
+	/* deep-sleep only */
+	u32 config2;
+};
+
+struct mpc83xx_rcw {
+	u32 rcwlr;
+	u32 rcwhr;
+};
+
+struct mpc83xx_clock {
+	u32 spmr;
+	u32 occr;
+	u32 sccr;
+};
+
+struct pmc_type {
+	int has_deep_sleep;
+};
+
+static struct of_device *pmc_dev;
+static int has_deep_sleep, deep_sleeping;
+static int pmc_irq;
+static struct mpc83xx_pmc __iomem *pmc_regs;
+static struct mpc83xx_clock __iomem *clock_regs;
+static int is_pci_agent, wake_from_pci;
+static phys_addr_t immrbase;
+static int pci_pm_state;
+static DECLARE_WAIT_QUEUE_HEAD(agent_wq);
+
+int fsl_deep_sleep(void)
+{
+	return deep_sleeping;
+}
+
+static int mpc83xx_change_state(void)
+{
+	u32 curr_state;
+	u32 reg_cfg1 = in_be32(&pmc_regs->config1);
+
+	if (is_pci_agent) {
+		pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >>
+		               PMCCR1_NEXT_STATE_SHIFT;
+		curr_state = reg_cfg1 & PMCCR1_CURR_STATE;
+
+		if (curr_state != pci_pm_state) {
+			reg_cfg1 &= ~PMCCR1_CURR_STATE;
+			reg_cfg1 |= pci_pm_state;
+			out_be32(&pmc_regs->config1, reg_cfg1);
+
+			wake_up(&agent_wq);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
+{
+	u32 event = in_be32(&pmc_regs->event);
+	int ret = IRQ_NONE;
+
+	if (mpc83xx_change_state())
+		ret = IRQ_HANDLED;
+
+	if (event) {
+		out_be32(&pmc_regs->event, event);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int mpc83xx_suspend_enter(suspend_state_t state)
+{
+	int ret = -EAGAIN;
+
+	/* Don't go to sleep if there's a race where pci_pm_state changes
+	 * between the agent thread checking it and the PM code disabling
+	 * interrupts.
+	 */
+	if (wake_from_pci) {
+		if (pci_pm_state != (deep_sleeping ? 3 : 2))
+			goto out;
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_PME_EN);
+	}
+
+	/* Put the system into low-power mode and the RAM
+	 * into self-refresh mode once the core goes to
+	 * sleep.
+	 */
+
+	out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN);
+
+	/* If it has deep sleep (i.e. it's an 831x or compatible),
+	 * disable power to the core upon entering sleep mode.  This will
+	 * require going through the boot firmware upon a wakeup event.
+	 */
+
+	if (deep_sleeping) {
+		out_be32(&pmc_regs->mask, PMCER_ALL);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF);
+
+		enable_kernel_fp();
+
+		mpc83xx_enter_deep_sleep(immrbase);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
+
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+	} else {
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+		mpc6xx_enter_standby();
+	}
+
+	ret = 0;
+
+out:
+	out_be32(&pmc_regs->config1,
+	         in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN);
+
+	return ret;
+}
+
+static void mpc83xx_suspend_finish(void)
+{
+	deep_sleeping = 0;
+}
+
+static int mpc83xx_suspend_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM;
+}
+
+static int mpc83xx_suspend_begin(suspend_state_t state)
+{
+	switch (state) {
+		case PM_SUSPEND_STANDBY:
+			deep_sleeping = 0;
+			return 0;
+
+		case PM_SUSPEND_MEM:
+			if (has_deep_sleep)
+				deep_sleeping = 1;
+
+			return 0;
+
+		default:
+			return -EINVAL;
+	}
+}
+
+static int agent_thread_fn(void *data)
+{
+	while (1) {
+		wait_event_interruptible(agent_wq, pci_pm_state >= 2);
+		try_to_freeze();
+
+		if (signal_pending(current) || pci_pm_state < 2)
+			continue;
+
+		/* With a preemptible kernel (or SMP), this could race with
+		 * a userspace-driven suspend request.  It's probably best
+		 * to avoid mixing the two with such a configuration (or
+		 * else fix it by adding a mutex to state_store that we can
+		 * synchronize with).
+		 */
+
+		wake_from_pci = 1;
+
+		pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM :
+		                               PM_SUSPEND_STANDBY);
+
+		wake_from_pci = 0;
+	}
+
+	return 0;
+}
+
+static void mpc83xx_set_agent(void)
+{
+	out_be32(&pmc_regs->config1, PMCCR1_USE_STATE);
+	out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+	kthread_run(agent_thread_fn, NULL, "PCI power mgt");
+}
+
+static int mpc83xx_is_pci_agent(void)
+{
+	struct mpc83xx_rcw __iomem *rcw_regs;
+	int ret;
+
+	rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET,
+	                   sizeof(struct mpc83xx_rcw));
+
+	if (!rcw_regs)
+		return -ENOMEM;
+
+	ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST);
+
+	iounmap(rcw_regs);
+	return ret;
+}
+
+static struct platform_suspend_ops mpc83xx_suspend_ops = {
+	.valid = mpc83xx_suspend_valid,
+	.begin = mpc83xx_suspend_begin,
+	.enter = mpc83xx_suspend_enter,
+	.finish = mpc83xx_suspend_finish,
+};
+
+static int pmc_probe(struct of_device *ofdev,
+                     const struct of_device_id *match)
+{
+	struct device_node *np = ofdev->node;
+	struct resource res;
+	struct pmc_type *type = match->data;
+	int ret = 0;
+
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	has_deep_sleep = type->has_deep_sleep;
+	immrbase = get_immrbase();
+	pmc_dev = ofdev;
+
+	is_pci_agent = mpc83xx_is_pci_agent();
+	if (is_pci_agent < 0)
+		return is_pci_agent;
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return -ENODEV;
+
+	pmc_irq = irq_of_parse_and_map(np, 0);
+	if (pmc_irq != NO_IRQ) {
+		ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED,
+		                  "pmc", ofdev);
+
+		if (ret)
+			return -EBUSY;
+	}
+
+	pmc_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!pmc_regs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = of_address_to_resource(np, 1, &res);
+	if (ret) {
+		ret = -ENODEV;
+		goto out_pmc;
+	}
+
+	clock_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!clock_regs) {
+		ret = -ENOMEM;
+		goto out_pmc;
+	}
+
+	if (is_pci_agent)
+		mpc83xx_set_agent();
+
+	suspend_set_ops(&mpc83xx_suspend_ops);
+	return 0;
+
+out_pmc:
+	iounmap(pmc_regs);
+out:
+	if (pmc_irq != NO_IRQ)
+		free_irq(pmc_irq, ofdev);
+
+	return ret;
+}
+
+static int pmc_remove(struct of_device *ofdev)
+{
+	return -EPERM;
+};
+
+static struct pmc_type pmc_types[] = {
+	{
+		.has_deep_sleep = 1,
+	},
+	{
+		.has_deep_sleep = 0,
+	}
+};
+
+static struct of_device_id pmc_match[] = {
+	{
+		.compatible = "fsl,mpc8313-pmc",
+		.data = &pmc_types[0],
+	},
+	{
+		.compatible = "fsl,mpc8349-pmc",
+		.data = &pmc_types[1],
+	},
+	{}
+};
+
+static struct of_platform_driver pmc_driver = {
+	.name = "mpc83xx-pmc",
+	.match_table = pmc_match,
+	.probe = pmc_probe,
+	.remove = pmc_remove
+};
+
+static int pmc_init(void)
+{
+	return of_register_platform_driver(&pmc_driver);
+}
+
+module_init(pmc_init);
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 64bcf0a33c71..cc99c280aad9 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -137,15 +137,21 @@ int mpc831x_usb_cfg(void)
 
 	/* Configure pin mux for ULPI.  There is no pin mux for UTMI */
 	if (prop && !strcmp(prop, "ulpi")) {
-		temp = in_be32(immap + MPC83XX_SICRL_OFFS);
-		temp &= ~MPC831X_SICRL_USB_MASK;
-		temp |= MPC831X_SICRL_USB_ULPI;
-		out_be32(immap + MPC83XX_SICRL_OFFS, temp);
-
-		temp = in_be32(immap + MPC83XX_SICRH_OFFS);
-		temp &= ~MPC831X_SICRH_USB_MASK;
-		temp |= MPC831X_SICRH_USB_ULPI;
-		out_be32(immap + MPC83XX_SICRH_OFFS, temp);
+		if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC8315_SICRL_USB_MASK,
+					MPC8315_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC8315_SICRH_USB_MASK,
+					MPC8315_SICRH_USB_ULPI);
+		} else {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC831X_SICRL_USB_MASK,
+					MPC831X_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC831X_SICRH_USB_MASK,
+					MPC831X_SICRH_USB_ULPI);
+		}
 	}
 
 	iounmap(immap);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index ecbe580c3f32..291675b0097a 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -2,8 +2,8 @@ menuconfig MPC85xx
 	bool "Machine Type"
 	depends on PPC_85xx
 	select PPC_UDBG_16550
-	select PPC_INDIRECT_PCI if PCI
 	select MPIC
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y
@@ -38,6 +38,12 @@ config MPC85xx_MDS
 	help
 	  This option enables support for the MPC85xx MDS board
 
+config MPC8536_DS
+	bool "Freescale MPC8536 DS"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC8536 DS board
+
 config MPC85xx_DS
 	bool "Freescale MPC85xx DS"
 	select PPC_I8259
@@ -75,6 +81,13 @@ config TQM8541
 	select TQM85xx
 	select CPM2
 
+config TQM8548
+	bool "TQ Components TQM8548"
+	help
+	  This option enables support for the TQ Components TQM8548 board.
+	select DEFAULT_UIMAGE
+	select TQM85xx
+
 config TQM8555
 	bool "TQ Components TQM8555"
 	help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 6cea185f62b2..cb3054e1001d 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -4,6 +4,7 @@
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
+obj-$(CONFIG_MPC8536_DS)  += mpc8536_ds.o
 obj-$(CONFIG_MPC85xx_DS)  += mpc85xx_ds.o
 obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
new file mode 100644
index 000000000000..6b846aa1ced9
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -0,0 +1,125 @@
+/*
+ * MPC8536 DS Board Setup
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+void __init mpc8536_ds_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc8536_ds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8536_ds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+			struct resource rsrc;
+			of_address_to_resource(np, 0, &rsrc);
+			if ((rsrc.start & 0xfffff) == 0x8000)
+				fsl_add_bridge(np, 1);
+			else
+				fsl_add_bridge(np, 0);
+		}
+	}
+
+#endif
+
+	printk("MPC8536 DS board from Freescale Semiconductor\n");
+}
+
+static struct of_device_id __initdata mpc8536_ds_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{},
+};
+
+static int __init mpc8536_ds_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc8536_ds_ids, NULL);
+}
+machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc8536_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,mpc8536ds");
+}
+
+define_machine(mpc8536_ds) {
+	.name			= "MPC8536 DS",
+	.probe			= mpc8536_ds_probe,
+	.setup_arch		= mpc8536_ds_setup_arch,
+	.init_IRQ		= mpc8536_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 3582c841844b..ba498d6f2d02 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -119,6 +119,8 @@ static const struct cpm_pin mpc8560_ads_pins[] = {
 	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 
 	/* SCC2 */
+	{2, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
@@ -145,7 +147,6 @@ static const struct cpm_pin mpc8560_ads_pins[] = {
 	{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
@@ -156,8 +157,9 @@ static const struct cpm_pin mpc8560_ads_pins[] = {
 	{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
-	{2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
+	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK16 */
+	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK15 */
+	{2, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 8b1de7884be6..50d7ea8f922b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -335,6 +336,19 @@ static int __init mpc85xx_cds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxCDS");
 }
 
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	return of_platform_bus_probe(NULL, of_bus_ids, NULL);
+}
+machine_device_initcall(mpc85xx_cds, declare_of_platform_devices);
+
 define_machine(mpc85xx_cds) {
 	.name		= "MPC85xx CDS",
 	.probe		= mpc85xx_cds_probe,
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index dfd8b4ad9b28..00c535806647 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -58,14 +58,13 @@ void __init mpc85xx_ds_pic_init(void)
 {
 	struct mpic *mpic;
 	struct resource r;
-	struct device_node *np = NULL;
+	struct device_node *np;
 #ifdef CONFIG_PPC_I8259
 	struct device_node *cascade_node = NULL;
 	int cascade_irq;
 #endif
 
-	np = of_find_node_by_type(np, "open-pic");
-
+	np = of_find_node_by_type(NULL, "open-pic");
 	if (np == NULL) {
 		printk(KERN_ERR "Could not find open-pic node\n");
 		return;
@@ -78,9 +77,11 @@ void __init mpc85xx_ds_pic_init(void)
 	}
 
 	mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
+	of_node_put(np);
 
 	mpic_init(mpic);
 
@@ -114,7 +115,6 @@ void __init mpc85xx_ds_pic_init(void)
 
 #ifdef CONFIG_PCI
 static int primary_phb_addr;
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
 
@@ -160,7 +160,6 @@ static void __init mpc85xx_ds_setup_arch(void)
 		}
 	}
 
-	uses_fsl_uli_m1575 = 1;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
@@ -184,7 +183,7 @@ static int __init mpc8544_ds_probe(void)
 	}
 }
 
-static struct of_device_id mpc85xxds_ids[] = {
+static struct of_device_id __initdata mpc85xxds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{},
@@ -195,6 +194,7 @@ static int __init mpc85xxds_publish_devices(void)
 	return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
 }
 machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
+machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 77681acf1bae..d850880d6964 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -120,8 +120,18 @@ static void __init tqm85xx_setup_arch(void)
 #endif
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+			struct resource rsrc;
+			if (!of_address_to_resource(np, 0, &rsrc)) {
+				if ((rsrc.start & 0xfffff) == 0x8000)
+					fsl_add_bridge(np, 1);
+				else
+					fsl_add_bridge(np, 0);
+			}
+		}
+	}
 #endif
 }
 
@@ -165,10 +175,11 @@ static int __init tqm85xx_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if ((of_flat_dt_is_compatible(root, "tqm,8540")) ||
-	    (of_flat_dt_is_compatible(root, "tqm,8541")) ||
-	    (of_flat_dt_is_compatible(root, "tqm,8555")) ||
-	    (of_flat_dt_is_compatible(root, "tqm,8560")))
+	if ((of_flat_dt_is_compatible(root, "tqc,tqm8540")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8541")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8548")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8555")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8560")))
 		return 1;
 
 	return 0;
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 053f49a1dcae..9355a5269431 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -1,7 +1,13 @@
-choice
-	prompt "86xx Board Type"
-	depends on PPC_86xx
-	default MPC8641_HPCN
+config PPC_86xx
+menuconfig PPC_86xx
+	bool "86xx-based boards"
+	depends on 6xx && PPC_MULTIPLATFORM
+	select FSL_SOC
+	select ALTIVEC
+	help
+	  The Freescale E600 SoCs have 74xx cores.
+
+if PPC_86xx
 
 config MPC8641_HPCN
 	bool "Freescale MPC8641 HPCN"
@@ -21,13 +27,15 @@ config SBC8641D
 config MPC8610_HPCD
 	bool "Freescale MPC8610 HPCD"
 	select DEFAULT_UIMAGE
+	select FSL_ULI1575
 	help
 	  This option enables support for the MPC8610 HPCD board.
 
-endchoice
+endif
 
 config MPC8641
 	bool
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
@@ -35,6 +43,7 @@ config MPC8641
 
 config MPC8610
 	bool
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 1b9b4a9b2525..8fee37dec795 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -2,6 +2,7 @@
 # Makefile for the PowerPC 86xx linux kernel.
 #
 
+obj-y				:= pic.o
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index dea13208bf64..5eedb710896e 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -39,6 +39,8 @@
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
 
+#include "mpc86xx.h"
+
 static unsigned char *pixis_bdcfg0, *pixis_arch;
 
 static struct of_device_id __initdata mpc8610_ids[] = {
@@ -56,114 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-static void __init mpc86xx_hpcd_init_irq(void)
-{
-	struct mpic *mpic1;
-	struct device_node *np;
-	struct resource res;
-
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " MPIC     ");
-	BUG_ON(mpic1 == NULL);
-
-	mpic_init(mpic1);
-}
-
-#ifdef CONFIG_PCI
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-	u32 temp32;
-
-	/* Disable INTx */
-	pci_read_config_dword(dev, 0x48, &temp32);
-	pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
-
-	/* Enable sideband interrupt */
-	pci_read_config_dword(dev, 0x90, &temp32);
-	pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
-{
-	unsigned char c;
-	unsigned short temp;
-
-	/* Interrupt Disable, Needed when SATA disabled */
-	pci_read_config_word(dev, PCI_COMMAND, &temp);
-	temp |= 1<<10;
-	pci_write_config_word(dev, PCI_COMMAND, temp);
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c |= 0x80;
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
-	pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0x83, c);
-}
-
-/*
- * Since 8259PIC was disabled on the board, the IDE device can not
- * use the legacy IRQ, we need to let the IDE device work under
- * native mode and use the interrupt line like other PCI devices.
- * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
- * as the interrupt for IDE device.
- */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-	unsigned char c;
-
-	pci_read_config_byte(dev, 0x4b, &c);
-	c |= 0x10;
-	pci_write_config_byte(dev, 0x4b, c);
-}
-
-/*
- * SATA interrupt pin bug fix
- * There's a chip bug for 5288, The interrupt pin should be 2,
- * not the read only value 1, So it use INTB#, not INTA# which
- * actually used by the IDE device 5229.
- * As of this bug, during the PCI initialization, 5288 read the
- * irq of IDE device from the device tree, this function fix this
- * bug by re-assigning a correct irq to 5288.
- *
- */
-static void __devinit final_uli5288(struct pci_dev *dev)
-{
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	struct device_node *hosenode = hose ? hose->dn : NULL;
-	struct of_irq oirq;
-	int virq, pin = 2;
-	u32 laddr[3];
-
-	if (!hosenode)
-		return;
-
-	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
-	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
-	dev->irq = virq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
-#endif /* CONFIG_PCI */
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
 static u32 get_busfreq(void)
@@ -404,7 +298,7 @@ define_machine(mpc86xx_hpcd) {
 	.name			= "MPC86xx HPCD",
 	.probe			= mpc86xx_hpcd_probe,
 	.setup_arch		= mpc86xx_hpcd_setup_arch,
-	.init_IRQ		= mpc86xx_hpcd_init_irq,
+	.init_IRQ		= mpc86xx_init_irq,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
 	.time_init		= mpc86xx_time_init,
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
index 525ffa1904f9..08efb57559d1 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx.h
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -15,6 +15,7 @@
  * mpc86xx_* files. Mostly for use by mpc86xx_setup().
  */
 
-extern void __init mpc86xx_smp_init(void);
+extern void mpc86xx_smp_init(void);
+extern void mpc86xx_init_irq(void);
 
 #endif	/* __MPC86XX_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f13704aabbea..f712d9c0991b 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -28,7 +28,6 @@
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
-#include <asm/i8259.h>
 
 #include <asm/mpic.h>
 
@@ -46,68 +45,6 @@
 #endif
 
 #ifdef CONFIG_PCI
-static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int cascade_irq = i8259_irq();
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-	desc->chip->eoi(irq);
-}
-#endif	/* CONFIG_PCI */
-
-static void __init
-mpc86xx_hpcn_init_irq(void)
-{
-	struct mpic *mpic1;
-	struct device_node *np;
-	struct resource res;
-#ifdef CONFIG_PCI
-	struct device_node *cascade_node = NULL;
-	int cascade_irq;
-#endif
-
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " MPIC     ");
-	BUG_ON(mpic1 == NULL);
-
-	mpic_init(mpic1);
-
-#ifdef CONFIG_PCI
-	/* Initialize i8259 controller */
-	for_each_node_by_type(np, "interrupt-controller")
-		if (of_device_is_compatible(np, "chrp,iic")) {
-			cascade_node = np;
-			break;
-		}
-	if (cascade_node == NULL) {
-		printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n");
-		return;
-	}
-
-	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
-	if (cascade_irq == NO_IRQ) {
-		printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt");
-		return;
-	}
-	DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
-
-	i8259_init(cascade_node, 0);
-	of_node_put(cascade_node);
-
-	set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
-#endif
-}
-
-#ifdef CONFIG_PCI
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
 
@@ -149,7 +86,6 @@ mpc86xx_hpcn_setup_arch(void)
 			fsl_add_bridge(np, 0);
 	}
 
-	uses_fsl_uli_m1575 = 1;
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 
 #endif
@@ -237,7 +173,7 @@ define_machine(mpc86xx_hpcn) {
 	.name			= "MPC86xx HPCN",
 	.probe			= mpc86xx_hpcn_probe,
 	.setup_arch		= mpc86xx_hpcn_setup_arch,
-	.init_IRQ		= mpc86xx_hpcn_init_irq,
+	.init_IRQ		= mpc86xx_init_irq,
 	.show_cpuinfo		= mpc86xx_hpcn_show_cpuinfo,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index ba55b0ff0f74..835f2dc24dc9 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
+#include <asm/code-patching.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/pci-bridge.h>
@@ -56,8 +57,7 @@ smp_86xx_kick_cpu(int nr)
 	unsigned int save_vector;
 	unsigned long target, flags;
 	int n = 0;
-	volatile unsigned int *vector
-		 = (volatile unsigned int *)(KERNELBASE + 0x100);
+	unsigned int *vector = (unsigned int *)(KERNELBASE + 0x100);
 
 	if (nr < 0 || nr >= NR_CPUS)
 		return;
@@ -71,7 +71,7 @@ smp_86xx_kick_cpu(int nr)
 
 	/* Setup fake reset vector to call __secondary_start_mpc86xx. */
 	target = (unsigned long) __secondary_start_mpc86xx;
-	create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
+	patch_branch(vector, target, BRANCH_SET_LINK);
 
 	/* Kick that CPU */
 	smp_86xx_release_core(nr);
diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c
new file mode 100644
index 000000000000..8881c5de500d
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/pic.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/mpic.h>
+#include <asm/i8259.h>
+
+#ifdef CONFIG_PPC_I8259
+static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq = i8259_irq();
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+	desc->chip->eoi(irq);
+}
+#endif	/* CONFIG_PPC_I8259 */
+
+void __init mpc86xx_init_irq(void)
+{
+	struct mpic *mpic;
+	struct device_node *np;
+	struct resource res;
+#ifdef CONFIG_PPC_I8259
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
+#endif
+
+	/* Determine PIC address. */
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL)
+		return;
+	of_address_to_resource(np, 0, &res);
+
+	mpic = mpic_alloc(np, res.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET |
+			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+			0, 256, " MPIC     ");
+	of_node_put(np);
+	BUG_ON(mpic == NULL);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+	/* Initialize i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (of_device_is_compatible(np, "chrp,iic")) {
+			cascade_node = np;
+			break;
+		}
+
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "Could not find i8259 PIC\n");
+		return;
+	}
+
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "Failed to map cascade interrupt\n");
+		return;
+	}
+
+	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
+	set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
+#endif
+}
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 510a06ef0b55..00e6fad3b3ca 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -38,29 +38,6 @@
 #include "mpc86xx.h"
 
 static void __init
-sbc8641_init_irq(void)
-{
-	struct mpic *mpic1;
-	struct device_node *np;
-	struct resource res;
-
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " MPIC     ");
-	of_node_put(np);
-	BUG_ON(mpic1 == NULL);
-
-	mpic_init(mpic1);
-}
-
-static void __init
 sbc8641_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -151,7 +128,7 @@ define_machine(sbc8641) {
 	.name			= "SBC8641D",
 	.probe			= sbc8641_probe,
 	.setup_arch		= sbc8641_setup_arch,
-	.init_IRQ		= sbc8641_init_irq,
+	.init_IRQ		= mpc86xx_init_irq,
 	.show_cpuinfo		= sbc8641_show_cpuinfo,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index c028a5b71bbb..caaec29796b7 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -65,6 +65,10 @@ static struct cpm_pin mpc866ads_pins[] = {
 	{CPM_PORTD, 13, CPM_PIN_OUTPUT},
 	{CPM_PORTD, 14, CPM_PIN_OUTPUT},
 	{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+
+	/* I2C */
+	{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+	{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index 6e7ded0233f6..45ed6cdc1310 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -158,6 +158,9 @@ static struct cpm_pin mpc885ads_pins[] = {
 	{CPM_PORTE, 28, CPM_PIN_OUTPUT},
 	{CPM_PORTE, 29, CPM_PIN_OUTPUT},
 #endif
+	/* I2C */
+	{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+	{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 87454c526973..1d0968775c0a 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -1,36 +1,9 @@
 menu "Platform support"
 
-choice
-	prompt "Machine type"
-	depends on PPC64 || 6xx
-	default PPC_MULTIPLATFORM
-
 config PPC_MULTIPLATFORM
-	bool "Generic desktop/server/laptop"
-	help
-	  Select this option if configuring for an IBM pSeries or
-	  RS/6000 machine, an Apple machine, or a PReP, CHRP,
-	  Maple or Cell-based machine.
-
-config PPC_82xx
-	bool "Freescale 82xx"
-	depends on 6xx
-
-config PPC_83xx
-	bool "Freescale 83xx"
-	depends on 6xx
-	select FSL_SOC
-	select MPC83xx
-	select IPIC
-
-config PPC_86xx
-	bool "Freescale 86xx"
-	depends on 6xx
-	select FSL_SOC
-	select ALTIVEC
-	help
-	  The Freescale E600 SoCs have 74xx cores.
-endchoice
+	bool
+	depends on PPC64 || 6xx
+	default y
 
 config CLASSIC32
 	def_bool y
@@ -280,17 +253,13 @@ config CPM2
 	depends on MPC85xx || 8260
 	select CPM
 	select PPC_LIB_RHEAP
+	select PPC_PCI_CHOICE
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
 	  you wish to build a kernel for a machine with a CPM2 coprocessor
 	  on it (826x, 827x, 8560).
 
-config PPC_CPM_NEW_BINDING
-	bool
-	depends on CPM1 || CPM2
-	default y
-
 config AXON_RAM
 	tristate "Axon DDR2 memory device driver"
 	depends on PPC_IBM_CELL_BLADE
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index f7efaa925a13..7f6512733862 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -42,12 +42,14 @@ config 40x
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config E200
 	bool "Freescale e200"
@@ -84,9 +86,6 @@ config TUNE_CELL
 	  machines. When building a kernel that is supposed to run only
 	  on Cell, you should also select the POWER4_ONLY option.
 
-config 6xx
-	bool
-
 # this is temp to handle compat with arch=ppc
 config 8xx
 	bool
@@ -95,6 +94,11 @@ config E500
 	select FSL_EMB_PERFMON
 	bool
 
+config PPC_E500MC
+	bool "e500mc Support"
+	select PPC_FPU
+	depends on E500
+
 config PPC_FPU
 	bool
 	default y if PPC64
@@ -155,9 +159,25 @@ config ALTIVEC
 
 	  If in doubt, say Y here.
 
+config VSX
+	bool "VSX Support"
+	depends on POWER4 && ALTIVEC && PPC_FPU
+	---help---
+
+	  This option enables kernel support for the Vector Scaler extensions
+	  to the PowerPC processor. The kernel currently supports saving and
+	  restoring VSX registers, and turning on the 'VSX enable' bit so user
+	  processes can execute VSX instructions.
+
+	  This option is only useful if you have a processor that supports
+	  VSX (P7 and above), but does not have any affect on a non-VSX
+	  CPUs (it does, however add code to the kernel).
+
+	  If in doubt, say Y here.
+
 config SPE
 	bool "SPE Support"
-	depends on E200 || E500
+	depends on E200 || (E500 && !PPC_E500MC)
 	default y
 	---help---
 	  This option enables kernel support for the Signal Processing
@@ -182,7 +202,7 @@ config PPC_STD_MMU_32
 
 config PPC_MM_SLICES
 	bool
-	default y if HUGETLB_PAGE
+	default y if HUGETLB_PAGE || PPC_64K_PAGES
 	default n
 
 config VIRT_CPU_ACCOUNTING
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 3959fcfe731c..c14d7d8d96c8 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -83,6 +83,22 @@ config CBE_RAS
 	depends on PPC_CELL_NATIVE
 	default y
 
+config PPC_IBM_CELL_RESETBUTTON
+	bool "IBM Cell Blade Pinhole reset button"
+	depends on CBE_RAS && PPC_IBM_CELL_BLADE
+	default y
+	help
+	  Support Pinhole Resetbutton on IBM Cell blades.
+	  This adds a method to trigger system reset via front panel pinhole button.
+
+config PPC_IBM_CELL_POWERBUTTON
+	tristate "IBM Cell Blade power button"
+	depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV
+	default y
+	help
+	  Support Powerbutton on IBM Cell blades.
+	  This will enable the powerbutton as an input device.
+
 config CBE_THERM
 	tristate "CBE thermal support"
 	default m
@@ -107,6 +123,15 @@ config CBE_CPUFREQ_PMI
 	  processor will not only be able to run at lower speed,
 	  but also at lower core voltage.
 
+config CBE_CPUFREQ_SPU_GOVERNOR
+	tristate "CBE frequency scaling based on SPU usage"
+	depends on SPU_FS && CPU_FREQ
+	default m
+	help
+	  This governor checks for spu usage to adjust the cpu frequency.
+	  If no spu is running on a given cpu, that cpu will be throttled to
+	  the minimal possible frequency.
+
 endmenu
 
 config OPROFILE_CELL
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index c2a7e4e5ddf9..7fd830872c43 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -8,6 +8,9 @@ obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
 obj-$(CONFIG_CBE_CPUFREQ_PMI)		+= cbe_cpufreq_pmi.o
 obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
 cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
+obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
+
+obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o
 
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_PPC_CELL_NATIVE)		+= smp.o
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c39f5c225f2e..896548ba1ca1 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -14,6 +14,7 @@
 #include <linux/pci.h>
 #include <linux/msi.h>
 #include <linux/of_platform.h>
+#include <linux/debugfs.h>
 
 #include <asm/dcr.h>
 #include <asm/machdep.h>
@@ -69,8 +70,19 @@ struct axon_msic {
 	dma_addr_t fifo_phys;
 	dcr_host_t dcr_host;
 	u32 read_offset;
+#ifdef DEBUG
+	u32 __iomem *trigger;
+#endif
 };
 
+#ifdef DEBUG
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic);
+#else
+static inline void axon_msi_debug_setup(struct device_node *dn,
+					struct axon_msic *msic) { }
+#endif
+
+
 static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
 {
 	pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
@@ -346,7 +358,14 @@ static int axon_msi_probe(struct of_device *device,
 		goto out_free_msic;
 	}
 
-	msic->irq_host = irq_alloc_host(of_node_get(dn), IRQ_HOST_MAP_NOMAP,
+	virq = irq_of_parse_and_map(dn, 0);
+	if (virq == NO_IRQ) {
+		printk(KERN_ERR "axon_msi: irq parse and map failed for %s\n",
+		       dn->full_name);
+		goto out_free_fifo;
+	}
+
+	msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
 					NR_IRQS, &msic_host_ops, 0);
 	if (!msic->irq_host) {
 		printk(KERN_ERR "axon_msi: couldn't allocate irq_host for %s\n",
@@ -356,13 +375,6 @@ static int axon_msi_probe(struct of_device *device,
 
 	msic->irq_host->host_data = msic;
 
-	virq = irq_of_parse_and_map(dn, 0);
-	if (virq == NO_IRQ) {
-		printk(KERN_ERR "axon_msi: irq parse and map failed for %s\n",
-		       dn->full_name);
-		goto out_free_host;
-	}
-
 	set_irq_data(virq, msic);
 	set_irq_chained_handler(virq, axon_msi_cascade);
 	pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
@@ -381,12 +393,12 @@ static int axon_msi_probe(struct of_device *device,
 	ppc_md.teardown_msi_irqs = axon_msi_teardown_msi_irqs;
 	ppc_md.msi_check_device = axon_msi_check_device;
 
+	axon_msi_debug_setup(dn, msic);
+
 	printk(KERN_DEBUG "axon_msi: setup MSIC on %s\n", dn->full_name);
 
 	return 0;
 
-out_free_host:
-	kfree(msic->irq_host);
 out_free_fifo:
 	dma_free_coherent(&device->dev, MSIC_FIFO_SIZE_BYTES, msic->fifo_virt,
 			  msic->fifo_phys);
@@ -418,3 +430,47 @@ static int __init axon_msi_init(void)
 	return of_register_platform_driver(&axon_msi_driver);
 }
 subsys_initcall(axon_msi_init);
+
+
+#ifdef DEBUG
+static int msic_set(void *data, u64 val)
+{
+	struct axon_msic *msic = data;
+	out_le32(msic->trigger, val);
+	return 0;
+}
+
+static int msic_get(void *data, u64 *val)
+{
+	*val = 0;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_msic, msic_get, msic_set, "%llu\n");
+
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
+{
+	char name[8];
+	u64 addr;
+
+	addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
+	if (addr == OF_BAD_ADDR) {
+		pr_debug("axon_msi: couldn't translate reg property\n");
+		return;
+	}
+
+	msic->trigger = ioremap(addr, 0x4);
+	if (!msic->trigger) {
+		pr_debug("axon_msi: ioremap failed\n");
+		return;
+	}
+
+	snprintf(name, sizeof(name), "msic_%d", of_node_to_nid(dn));
+
+	if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
+				 msic, &fops_msic)) {
+		pr_debug("axon_msi: debugfs_create_file failed!\n");
+		return;
+	}
+}
+#endif /* DEBUG */
diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c
index 81467ff055c8..2e67bd840e01 100644
--- a/arch/powerpc/platforms/cell/beat_htab.c
+++ b/arch/powerpc/platforms/cell/beat_htab.c
@@ -112,7 +112,7 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
 	if (!(vflags & HPTE_V_BOLTED))
 		DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
-	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+	if (rflags & _PAGE_NO_CACHE)
 		hpte_r &= ~_PAGE_COHERENT;
 
 	spin_lock(&beat_htab_lock);
@@ -334,7 +334,7 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,
 	if (!(vflags & HPTE_V_BOLTED))
 		DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
-	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+	if (rflags & _PAGE_NO_CACHE)
 		hpte_r &= ~_PAGE_COHERENT;
 
 	/* insert into not-volted entry */
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
new file mode 100644
index 000000000000..dcddaa5fcb66
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -0,0 +1,117 @@
+/*
+ * driver for powerbutton on IBM cell blades
+ *
+ * (C) Copyright IBM Corp. 2005-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <asm/pmi.h>
+#include <asm/prom.h>
+
+static struct input_dev *button_dev;
+static struct platform_device *button_pdev;
+
+static void cbe_powerbutton_handle_pmi(pmi_message_t pmi_msg)
+{
+	BUG_ON(pmi_msg.type != PMI_TYPE_POWER_BUTTON);
+
+	input_report_key(button_dev, KEY_POWER, 1);
+	input_sync(button_dev);
+	input_report_key(button_dev, KEY_POWER, 0);
+	input_sync(button_dev);
+}
+
+static struct pmi_handler cbe_pmi_handler = {
+	.type			= PMI_TYPE_POWER_BUTTON,
+	.handle_pmi_message	= cbe_powerbutton_handle_pmi,
+};
+
+static int __init cbe_powerbutton_init(void)
+{
+	int ret = 0;
+	struct input_dev *dev;
+
+	if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+		printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	dev = input_allocate_device();
+	if (!dev) {
+		ret = -ENOMEM;
+		printk(KERN_ERR "%s: Not enough memory.\n", __func__);
+		goto out;
+	}
+
+	set_bit(EV_KEY, dev->evbit);
+	set_bit(KEY_POWER, dev->keybit);
+
+	dev->name = "Power Button";
+	dev->id.bustype = BUS_HOST;
+
+	/* this makes the button look like an acpi power button
+	 * no clue whether anyone relies on that though */
+	dev->id.product = 0x02;
+	dev->phys = "LNXPWRBN/button/input0";
+
+	button_pdev = platform_device_register_simple("power_button", 0, NULL, 0);
+	if (IS_ERR(button_pdev)) {
+		ret = PTR_ERR(button_pdev);
+		goto out_free_input;
+	}
+
+	dev->dev.parent = &button_pdev->dev;
+	ret = input_register_device(dev);
+	if (ret) {
+		printk(KERN_ERR "%s: Failed to register device\n", __func__);
+		goto out_free_pdev;
+	}
+
+	button_dev = dev;
+
+	ret = pmi_register_handler(&cbe_pmi_handler);
+	if (ret) {
+		printk(KERN_ERR "%s: Failed to register with pmi.\n", __func__);
+		goto out_free_pdev;
+	}
+
+	goto out;
+
+out_free_pdev:
+	platform_device_unregister(button_pdev);
+out_free_input:
+	input_free_device(dev);
+out:
+	return ret;
+}
+
+static void __exit cbe_powerbutton_exit(void)
+{
+	pmi_unregister_handler(&cbe_pmi_handler);
+	platform_device_unregister(button_pdev);
+	input_free_device(button_dev);
+}
+
+module_init(cbe_powerbutton_init);
+module_exit(cbe_powerbutton_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 4852bf312d83..4d4c8c169124 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -97,7 +97,8 @@ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iom
 	return value.spe[spu->spe_id];
 }
 
-static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr,
+			char *buf)
 {
 	u8 value;
 	struct cbe_pmd_regs __iomem *pmd_regs;
@@ -146,32 +147,38 @@ static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char
 	return size;
 }
 
-static ssize_t spu_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 0);
 }
 
-static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 8);
 }
 
-static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 16);
 }
 
-static ssize_t spu_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
 }
 
-static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
 }
 
-static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
 }
@@ -192,43 +199,51 @@ static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
 
 /* shows the temperature of the DTS on the PPE,
  * located near the linear thermal sensor */
-static ssize_t ppe_show_temp0(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp0(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return ppe_show_temp(sysdev, buf, 32);
 }
 
 /* shows the temperature of the second DTS on the PPE */
-static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp1(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return ppe_show_temp(sysdev, buf, 0);
 }
 
-static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
 }
 
-static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
 }
 
-static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
 }
 
-static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
 }
 
-static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
 }
 
-static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
 }
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 0e04f8fb152a..3e7e0f1568ef 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -281,7 +281,7 @@ static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data)
 
 	dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(bus->phb->parent, dummy_page_da)) {
 		pr_err("PCIEX:Map dummy page failed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
new file mode 100644
index 000000000000..a3c6c01bd6db
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
@@ -0,0 +1,184 @@
+/*
+ * spu aware cpufreq governor for the cell processor
+ *
+ * © Copyright IBM Corporation 2006-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <asm/atomic.h>
+#include <asm/machdep.h>
+#include <asm/spu.h>
+
+#define POLL_TIME	100000		/* in µs */
+#define EXP		753		/* exp(-1) in fixed-point */
+
+struct spu_gov_info_struct {
+	unsigned long busy_spus;	/* fixed-point */
+	struct cpufreq_policy *policy;
+	struct delayed_work work;
+	unsigned int poll_int;		/* µs */
+};
+static DEFINE_PER_CPU(struct spu_gov_info_struct, spu_gov_info);
+
+static struct workqueue_struct *kspugov_wq;
+
+static int calc_freq(struct spu_gov_info_struct *info)
+{
+	int cpu;
+	int busy_spus;
+
+	cpu = info->policy->cpu;
+	busy_spus = atomic_read(&cbe_spu_info[cpu_to_node(cpu)].busy_spus);
+
+	CALC_LOAD(info->busy_spus, EXP, busy_spus * FIXED_1);
+	pr_debug("cpu %d: busy_spus=%d, info->busy_spus=%ld\n",
+			cpu, busy_spus, info->busy_spus);
+
+	return info->policy->max * info->busy_spus / FIXED_1;
+}
+
+static void spu_gov_work(struct work_struct *work)
+{
+	struct spu_gov_info_struct *info;
+	int delay;
+	unsigned long target_freq;
+
+	info = container_of(work, struct spu_gov_info_struct, work.work);
+
+	/* after cancel_delayed_work_sync we unset info->policy */
+	BUG_ON(info->policy == NULL);
+
+	target_freq = calc_freq(info);
+	__cpufreq_driver_target(info->policy, target_freq, CPUFREQ_RELATION_H);
+
+	delay = usecs_to_jiffies(info->poll_int);
+	queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_init_work(struct spu_gov_info_struct *info)
+{
+	int delay = usecs_to_jiffies(info->poll_int);
+	INIT_DELAYED_WORK_DEFERRABLE(&info->work, spu_gov_work);
+	queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_cancel_work(struct spu_gov_info_struct *info)
+{
+	cancel_delayed_work_sync(&info->work);
+}
+
+static int spu_gov_govern(struct cpufreq_policy *policy, unsigned int event)
+{
+	unsigned int cpu = policy->cpu;
+	struct spu_gov_info_struct *info, *affected_info;
+	int i;
+	int ret = 0;
+
+	info = &per_cpu(spu_gov_info, cpu);
+
+	switch (event) {
+	case CPUFREQ_GOV_START:
+		if (!cpu_online(cpu)) {
+			printk(KERN_ERR "cpu %d is not online\n", cpu);
+			ret = -EINVAL;
+			break;
+		}
+
+		if (!policy->cur) {
+			printk(KERN_ERR "no cpu specified in policy\n");
+			ret = -EINVAL;
+			break;
+		}
+
+		/* initialize spu_gov_info for all affected cpus */
+		for_each_cpu_mask(i, policy->cpus) {
+			affected_info = &per_cpu(spu_gov_info, i);
+			affected_info->policy = policy;
+		}
+
+		info->poll_int = POLL_TIME;
+
+		/* setup timer */
+		spu_gov_init_work(info);
+
+		break;
+
+	case CPUFREQ_GOV_STOP:
+		/* cancel timer */
+		spu_gov_cancel_work(info);
+
+		/* clean spu_gov_info for all affected cpus */
+		for_each_cpu_mask (i, policy->cpus) {
+			info = &per_cpu(spu_gov_info, i);
+			info->policy = NULL;
+		}
+
+		break;
+	}
+
+	return ret;
+}
+
+static struct cpufreq_governor spu_governor = {
+	.name = "spudemand",
+	.governor = spu_gov_govern,
+	.owner = THIS_MODULE,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init spu_gov_init(void)
+{
+	int ret;
+
+	kspugov_wq = create_workqueue("kspugov");
+	if (!kspugov_wq) {
+		printk(KERN_ERR "creation of kspugov failed\n");
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = cpufreq_register_governor(&spu_governor);
+	if (ret) {
+		printk(KERN_ERR "registration of governor failed\n");
+		destroy_workqueue(kspugov_wq);
+		goto out;
+	}
+out:
+	return ret;
+}
+
+static void __exit spu_gov_exit(void)
+{
+	cpufreq_unregister_governor(&spu_governor);
+	destroy_workqueue(kspugov_wq);
+}
+
+
+module_init(spu_gov_init);
+module_exit(spu_gov_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 5bf7df146022..2d5bb22d6c09 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -218,6 +218,7 @@ void iic_request_IPIs(void)
 {
 	iic_request_ipi(PPC_MSG_CALL_FUNCTION, "IPI-call");
 	iic_request_ipi(PPC_MSG_RESCHEDULE, "IPI-resched");
+	iic_request_ipi(PPC_MSG_CALL_FUNC_SINGLE, "IPI-call-single");
 #ifdef CONFIG_DEBUGGER
 	iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug");
 #endif /* CONFIG_DEBUGGER */
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 45646b2b4af4..e06420af5fe9 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -172,8 +172,9 @@ static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
 	}
 }
 
-static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
-		unsigned long uaddr, enum dma_data_direction direction)
+static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
+		unsigned long uaddr, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	int i;
 	unsigned long *io_pte, base_pte;
@@ -198,6 +199,8 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW |
 		(window->ioid & IOPTE_IOID_Mask);
 #endif
+	if (unlikely(dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)))
+		base_pte &= ~IOPTE_SO_RW;
 
 	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
@@ -210,6 +213,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 
 	pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
 		 index, npages, direction, base_pte);
+	return 0;
 }
 
 static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
@@ -519,7 +523,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 
 	__set_bit(0, window->table.it_map);
 	tce_build_cell(&window->table, window->table.it_offset, 1,
-		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE);
+		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE, NULL);
 	window->table.it_hint = window->table.it_blocksize;
 
 	return window;
@@ -538,9 +542,11 @@ static struct cbe_iommu *cell_iommu_for_node(int nid)
 static unsigned long cell_dma_direct_offset;
 
 static unsigned long dma_iommu_fixed_base;
-struct dma_mapping_ops dma_iommu_fixed_ops;
 
-static void cell_dma_dev_setup_iommu(struct device *dev)
+/* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
+static int iommu_fixed_is_weak;
+
+static struct iommu_table *cell_get_iommu_table(struct device *dev)
 {
 	struct iommu_window *window;
 	struct cbe_iommu *iommu;
@@ -555,13 +561,105 @@ static void cell_dma_dev_setup_iommu(struct device *dev)
 		printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n",
 		       archdata->of_node ? archdata->of_node->full_name : "?",
 		       archdata->numa_node);
-		return;
+		return NULL;
 	}
 	window = list_entry(iommu->windows.next, struct iommu_window, list);
 
-	archdata->dma_data = &window->table;
+	return &window->table;
+}
+
+/* A coherent allocation implies strong ordering */
+
+static void *dma_fixed_alloc_coherent(struct device *dev, size_t size,
+				      dma_addr_t *dma_handle, gfp_t flag)
+{
+	if (iommu_fixed_is_weak)
+		return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
+					    size, dma_handle,
+					    device_to_mask(dev), flag,
+					    dev->archdata.numa_node);
+	else
+		return dma_direct_ops.alloc_coherent(dev, size, dma_handle,
+						     flag);
+}
+
+static void dma_fixed_free_coherent(struct device *dev, size_t size,
+				    void *vaddr, dma_addr_t dma_handle)
+{
+	if (iommu_fixed_is_weak)
+		iommu_free_coherent(cell_get_iommu_table(dev), size, vaddr,
+				    dma_handle);
+	else
+		dma_direct_ops.free_coherent(dev, size, vaddr, dma_handle);
+}
+
+static dma_addr_t dma_fixed_map_single(struct device *dev, void *ptr,
+				       size_t size,
+				       enum dma_data_direction direction,
+				       struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		return dma_direct_ops.map_single(dev, ptr, size, direction,
+						 attrs);
+	else
+		return iommu_map_single(dev, cell_get_iommu_table(dev), ptr,
+					size, device_to_mask(dev), direction,
+					attrs);
 }
 
+static void dma_fixed_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				   size_t size,
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		dma_direct_ops.unmap_single(dev, dma_addr, size, direction,
+					    attrs);
+	else
+		iommu_unmap_single(cell_get_iommu_table(dev), dma_addr, size,
+				   direction, attrs);
+}
+
+static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg,
+			   int nents, enum dma_data_direction direction,
+			   struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		return dma_direct_ops.map_sg(dev, sg, nents, direction, attrs);
+	else
+		return iommu_map_sg(dev, cell_get_iommu_table(dev), sg, nents,
+				    device_to_mask(dev), direction, attrs);
+}
+
+static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg,
+			       int nents, enum dma_data_direction direction,
+			       struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		dma_direct_ops.unmap_sg(dev, sg, nents, direction, attrs);
+	else
+		iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents, direction,
+			       attrs);
+}
+
+static int dma_fixed_dma_supported(struct device *dev, u64 mask)
+{
+	return mask == DMA_64BIT_MASK;
+}
+
+static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
+
+struct dma_mapping_ops dma_iommu_fixed_ops = {
+	.alloc_coherent = dma_fixed_alloc_coherent,
+	.free_coherent  = dma_fixed_free_coherent,
+	.map_single     = dma_fixed_map_single,
+	.unmap_single   = dma_fixed_unmap_single,
+	.map_sg         = dma_fixed_map_sg,
+	.unmap_sg       = dma_fixed_unmap_sg,
+	.dma_supported  = dma_fixed_dma_supported,
+	.set_dma_mask   = dma_set_mask_and_switch,
+};
+
 static void cell_dma_dev_setup_fixed(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
@@ -572,7 +670,7 @@ static void cell_dma_dev_setup(struct device *dev)
 	if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
 		cell_dma_dev_setup_fixed(dev);
 	else if (get_pci_dma_ops() == &dma_iommu_ops)
-		cell_dma_dev_setup_iommu(dev);
+		archdata->dma_data = cell_get_iommu_table(dev);
 	else if (get_pci_dma_ops() == &dma_direct_ops)
 		archdata->dma_data = (void *)cell_dma_direct_offset;
 	else
@@ -918,9 +1016,16 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
 
 	pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
+	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M
 		    | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
 
+	if (iommu_fixed_is_weak)
+		pr_info("IOMMU: Using weak ordering for fixed mapping\n");
+	else {
+		pr_info("IOMMU: Using strong ordering for fixed mapping\n");
+		base_pte |= IOPTE_SO_RW;
+	}
+
 	for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
 		/* Don't touch the dynamic region */
 		ioaddr = uaddr + fbase;
@@ -1036,9 +1141,6 @@ static int __init cell_iommu_fixed_mapping_init(void)
 		cell_iommu_setup_window(iommu, np, dbase, dsize, 0);
 	}
 
-	dma_iommu_fixed_ops = dma_direct_ops;
-	dma_iommu_fixed_ops.set_dma_mask = dma_set_mask_and_switch;
-
 	dma_iommu_ops.set_dma_mask = dma_set_mask_and_switch;
 	set_pci_dma_ops(&dma_iommu_ops);
 
@@ -1049,9 +1151,23 @@ static int iommu_fixed_disabled;
 
 static int __init setup_iommu_fixed(char *str)
 {
+	struct device_node *pciep;
+
 	if (strcmp(str, "off") == 0)
 		iommu_fixed_disabled = 1;
 
+	/* If we can find a pcie-endpoint in the device tree assume that
+	 * we're on a triblade or a CAB so by default the fixed mapping
+	 * should be set to be weakly ordered; but only if the boot
+	 * option WASN'T set for strong ordering
+	 */
+	pciep = of_find_node_by_type(NULL, "pcie-endpoint");
+
+	if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0))
+		iommu_fixed_is_weak = 1;
+
+	of_node_put(pciep);
+
 	return 1;
 }
 __setup("iommu_fixed=", setup_iommu_fixed);
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 8a3631ce912b..efdacc829576 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -38,8 +38,6 @@
 
 #include "pervasive.h"
 
-static int sysreset_hack;
-
 static void cbe_power_save(void)
 {
 	unsigned long ctrl, thread_switch_control;
@@ -87,9 +85,6 @@ static void cbe_power_save(void)
 
 static int cbe_system_reset_exception(struct pt_regs *regs)
 {
-	int cpu;
-	struct cbe_pmd_regs __iomem *pmd;
-
 	switch (regs->msr & SRR1_WAKEMASK) {
 	case SRR1_WAKEEE:
 		do_IRQ(regs);
@@ -98,19 +93,7 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 		timer_interrupt(regs);
 		break;
 	case SRR1_WAKEMT:
-		/*
-		 * The BMC can inject user triggered system reset exceptions,
-		 * but cannot set the system reset reason in srr1,
-		 * so check an extra register here.
-		 */
-		if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
-			pmd = cbe_get_cpu_pmd_regs(cpu);
-			if (in_be64(&pmd->ras_esc_0) & 0xffff) {
-				out_be64(&pmd->ras_esc_0, 0);
-				return 0;
-			}
-		}
-		break;
+		return cbe_sysreset_hack();
 #ifdef CONFIG_CBE_RAS
 	case SRR1_WAKESYSERR:
 		cbe_system_error_exception(regs);
@@ -134,8 +117,6 @@ void __init cbe_pervasive_init(void)
 	if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
 		return;
 
-	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
-
 	for_each_possible_cpu(cpu) {
 		struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu);
 		if (!regs)
@@ -144,12 +125,6 @@ void __init cbe_pervasive_init(void)
 		 /* Enable Pause(0) control bit */
 		out_be64(&regs->pmcr, in_be64(&regs->pmcr) |
 					    CBE_PMD_PAUSE_ZERO_CONTROL);
-
-		/* Enable JTAG system-reset hack */
-		if (sysreset_hack)
-			out_be32(&regs->fir_mode_reg,
-				in_be32(&regs->fir_mode_reg) |
-				CBE_PMD_FIR_MODE_M8);
 	}
 
 	ppc_md.power_save = cbe_power_save;
diff --git a/arch/powerpc/platforms/cell/pervasive.h b/arch/powerpc/platforms/cell/pervasive.h
index 7b50947f8044..fd4d7b7092b4 100644
--- a/arch/powerpc/platforms/cell/pervasive.h
+++ b/arch/powerpc/platforms/cell/pervasive.h
@@ -30,4 +30,13 @@ extern void cbe_system_error_exception(struct pt_regs *regs);
 extern void cbe_maintenance_exception(struct pt_regs *regs);
 extern void cbe_thermal_exception(struct pt_regs *regs);
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+extern int cbe_sysreset_hack(void);
+#else
+static inline int cbe_sysreset_hack(void)
+{
+	return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 #endif
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 655704ad03cf..2a14b052abcd 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -17,6 +17,7 @@
 #include <asm/reg.h>
 #include <asm/io.h>
 #include <asm/prom.h>
+#include <asm/kexec.h>
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include <asm/cell-regs.h>
@@ -226,10 +227,61 @@ static int cbe_ptcal_notify_reboot(struct notifier_block *nb,
 	return cbe_ptcal_disable();
 }
 
+static void cbe_ptcal_crash_shutdown(void)
+{
+	cbe_ptcal_disable();
+}
+
 static struct notifier_block cbe_ptcal_reboot_notifier = {
 	.notifier_call = cbe_ptcal_notify_reboot
 };
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+static int sysreset_hack;
+
+static int __init cbe_sysreset_init(void)
+{
+	struct cbe_pmd_regs __iomem *regs;
+
+	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+	if (!sysreset_hack)
+		return 0;
+
+	regs = cbe_get_cpu_pmd_regs(0);
+	if (!regs)
+		return 0;
+
+	/* Enable JTAG system-reset hack */
+	out_be32(&regs->fir_mode_reg,
+		in_be32(&regs->fir_mode_reg) |
+		CBE_PMD_FIR_MODE_M8);
+
+	return 0;
+}
+device_initcall(cbe_sysreset_init);
+
+int cbe_sysreset_hack(void)
+{
+	struct cbe_pmd_regs __iomem *regs;
+
+	/*
+	 * The BMC can inject user triggered system reset exceptions,
+	 * but cannot set the system reset reason in srr1,
+	 * so check an extra register here.
+	 */
+	if (sysreset_hack && (smp_processor_id() == 0)) {
+		regs = cbe_get_cpu_pmd_regs(0);
+		if (!regs)
+			return 0;
+		if (in_be64(&regs->ras_esc_0) & 0x0000ffff) {
+			out_be64(&regs->ras_esc_0, 0);
+			return 0;
+		}
+	}
+	return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 int __init cbe_ptcal_init(void)
 {
 	int ret;
@@ -241,12 +293,20 @@ int __init cbe_ptcal_init(void)
 		return -ENODEV;
 
 	ret = register_reboot_notifier(&cbe_ptcal_reboot_notifier);
-	if (ret) {
-		printk(KERN_ERR "Can't disable PTCAL, so not enabling\n");
-		return ret;
-	}
+	if (ret)
+		goto out1;
+
+	ret = crash_shutdown_register(&cbe_ptcal_crash_shutdown);
+	if (ret)
+		goto out2;
 
 	return cbe_ptcal_enable();
+
+out2:
+	unregister_reboot_notifier(&cbe_ptcal_reboot_notifier);
+out1:
+	printk(KERN_ERR "Can't disable PTCAL, so not enabling\n");
+	return ret;
 }
 
 arch_initcall(cbe_ptcal_init);
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index 418b605ac35a..5122ec145271 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -111,7 +111,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
 
 	dummy_page_da = dma_map_single(phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(phb->parent, dummy_page_da)) {
 		pr_err("SPIDER-IOWA:Map dummy page filed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 3f4b4aef756d..4e5655624ae8 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -300,7 +300,7 @@ static void __init spider_init_one(struct device_node *of_node, int chip,
 		panic("spider_pic: can't map registers !");
 
 	/* Allocate a host */
-	pic->host = irq_alloc_host(of_node_get(of_node), IRQ_HOST_MAP_LINEAR,
+	pic->host = irq_alloc_host(of_node, IRQ_HOST_MAP_LINEAR,
 				   SPIDER_SRC_COUNT, &spider_host_ops,
 				   SPIDER_IRQ_INVALID);
 	if (pic->host == NULL)
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 78f905bc6a42..a5bdb89a17c3 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -703,7 +703,8 @@ static unsigned long long spu_acct_time(struct spu *spu,
 }
 
 
-static ssize_t spu_stat_show(struct sys_device *sysdev, char *buf)
+static ssize_t spu_stat_show(struct sys_device *sysdev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct spu *spu = container_of(sysdev, struct spu, sysdev);
 
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 177735f79317..6653ddbed048 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -130,17 +130,17 @@ void spu_unmap_mappings(struct spu_context *ctx)
 	if (ctx->local_store)
 		unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1);
 	if (ctx->mfc)
-		unmap_mapping_range(ctx->mfc, 0, 0x1000, 1);
+		unmap_mapping_range(ctx->mfc, 0, SPUFS_MFC_MAP_SIZE, 1);
 	if (ctx->cntl)
-		unmap_mapping_range(ctx->cntl, 0, 0x1000, 1);
+		unmap_mapping_range(ctx->cntl, 0, SPUFS_CNTL_MAP_SIZE, 1);
 	if (ctx->signal1)
-		unmap_mapping_range(ctx->signal1, 0, PAGE_SIZE, 1);
+		unmap_mapping_range(ctx->signal1, 0, SPUFS_SIGNAL_MAP_SIZE, 1);
 	if (ctx->signal2)
-		unmap_mapping_range(ctx->signal2, 0, PAGE_SIZE, 1);
+		unmap_mapping_range(ctx->signal2, 0, SPUFS_SIGNAL_MAP_SIZE, 1);
 	if (ctx->mss)
-		unmap_mapping_range(ctx->mss, 0, 0x1000, 1);
+		unmap_mapping_range(ctx->mss, 0, SPUFS_MSS_MAP_SIZE, 1);
 	if (ctx->psmap)
-		unmap_mapping_range(ctx->psmap, 0, 0x20000, 1);
+		unmap_mapping_range(ctx->psmap, 0, SPUFS_PS_MAP_SIZE, 1);
 	mutex_unlock(&ctx->mapping_lock);
 }
 
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index c81341ff75b5..010a51f59796 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -238,11 +238,13 @@ spufs_mem_write(struct file *file, const char __user *buffer,
 	return size;
 }
 
-static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
-					  unsigned long address)
+static int
+spufs_mem_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
 	struct spu_context *ctx	= vma->vm_file->private_data;
-	unsigned long pfn, offset, addr0 = address;
+	unsigned long address = (unsigned long)vmf->virtual_address;
+	unsigned long pfn, offset;
+
 #ifdef CONFIG_SPU_FS_64K_LS
 	struct spu_state *csa = &ctx->csa;
 	int psize;
@@ -260,15 +262,15 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
 	}
 #endif /* CONFIG_SPU_FS_64K_LS */
 
-	offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT);
+	offset = vmf->pgoff << PAGE_SHIFT;
 	if (offset >= LS_SIZE)
-		return NOPFN_SIGBUS;
+		return VM_FAULT_SIGBUS;
 
-	pr_debug("spufs_mem_mmap_nopfn address=0x%lx -> 0x%lx, offset=0x%lx\n",
-		 addr0, address, offset);
+	pr_debug("spufs_mem_mmap_fault address=0x%lx, offset=0x%lx\n",
+			address, offset);
 
 	if (spu_acquire(ctx))
-		return NOPFN_REFAULT;
+		return VM_FAULT_NOPAGE;
 
 	if (ctx->state == SPU_STATE_SAVED) {
 		vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
@@ -283,12 +285,35 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
 
 	spu_release(ctx);
 
-	return NOPFN_REFAULT;
+	return VM_FAULT_NOPAGE;
 }
 
+static int spufs_mem_mmap_access(struct vm_area_struct *vma,
+				unsigned long address,
+				void *buf, int len, int write)
+{
+	struct spu_context *ctx = vma->vm_file->private_data;
+	unsigned long offset = address - vma->vm_start;
+	char *local_store;
+
+	if (write && !(vma->vm_flags & VM_WRITE))
+		return -EACCES;
+	if (spu_acquire(ctx))
+		return -EINTR;
+	if ((offset + len) > vma->vm_end)
+		len = vma->vm_end - offset;
+	local_store = ctx->ops->get_ls(ctx);
+	if (write)
+		memcpy_toio(local_store + offset, buf, len);
+	else
+		memcpy_fromio(buf, local_store + offset, len);
+	spu_release(ctx);
+	return len;
+}
 
 static struct vm_operations_struct spufs_mem_mmap_vmops = {
-	.nopfn = spufs_mem_mmap_nopfn,
+	.fault = spufs_mem_mmap_fault,
+	.access = spufs_mem_mmap_access,
 };
 
 static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
@@ -351,20 +376,19 @@ static const struct file_operations spufs_mem_fops = {
 #endif
 };
 
-static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
-				    unsigned long address,
+static int spufs_ps_fault(struct vm_area_struct *vma,
+				    struct vm_fault *vmf,
 				    unsigned long ps_offs,
 				    unsigned long ps_size)
 {
 	struct spu_context *ctx = vma->vm_file->private_data;
-	unsigned long area, offset = address - vma->vm_start;
+	unsigned long area, offset = vmf->pgoff << PAGE_SHIFT;
 	int ret = 0;
 
-	spu_context_nospu_trace(spufs_ps_nopfn__enter, ctx);
+	spu_context_nospu_trace(spufs_ps_fault__enter, ctx);
 
-	offset += vma->vm_pgoff << PAGE_SHIFT;
 	if (offset >= ps_size)
-		return NOPFN_SIGBUS;
+		return VM_FAULT_SIGBUS;
 
 	/*
 	 * Because we release the mmap_sem, the context may be destroyed while
@@ -378,7 +402,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 	 * pages to hand out to the user, but we don't want to wait
 	 * with the mmap_sem held.
 	 * It is possible to drop the mmap_sem here, but then we need
-	 * to return NOPFN_REFAULT because the mappings may have
+	 * to return VM_FAULT_NOPAGE because the mappings may have
 	 * hanged.
 	 */
 	if (spu_acquire(ctx))
@@ -386,14 +410,15 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 
 	if (ctx->state == SPU_STATE_SAVED) {
 		up_read(&current->mm->mmap_sem);
-		spu_context_nospu_trace(spufs_ps_nopfn__sleep, ctx);
+		spu_context_nospu_trace(spufs_ps_fault__sleep, ctx);
 		ret = spufs_wait(ctx->run_wq, ctx->state == SPU_STATE_RUNNABLE);
-		spu_context_trace(spufs_ps_nopfn__wake, ctx, ctx->spu);
+		spu_context_trace(spufs_ps_fault__wake, ctx, ctx->spu);
 		down_read(&current->mm->mmap_sem);
 	} else {
 		area = ctx->spu->problem_phys + ps_offs;
-		vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT);
-		spu_context_trace(spufs_ps_nopfn__insert, ctx, ctx->spu);
+		vm_insert_pfn(vma, (unsigned long)vmf->virtual_address,
+					(area + offset) >> PAGE_SHIFT);
+		spu_context_trace(spufs_ps_fault__insert, ctx, ctx->spu);
 	}
 
 	if (!ret)
@@ -401,18 +426,18 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 
 refault:
 	put_spu_context(ctx);
-	return NOPFN_REFAULT;
+	return VM_FAULT_NOPAGE;
 }
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_cntl_mmap_nopfn(struct vm_area_struct *vma,
-					   unsigned long address)
+static int spufs_cntl_mmap_fault(struct vm_area_struct *vma,
+					   struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x4000, 0x1000);
+	return spufs_ps_fault(vma, vmf, 0x4000, SPUFS_CNTL_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_cntl_mmap_vmops = {
-	.nopfn = spufs_cntl_mmap_nopfn,
+	.fault = spufs_cntl_mmap_fault,
 };
 
 /*
@@ -1097,23 +1122,23 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf,
 	return 4;
 }
 
-static unsigned long spufs_signal1_mmap_nopfn(struct vm_area_struct *vma,
-					      unsigned long address)
+static int
+spufs_signal1_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-#if PAGE_SIZE == 0x1000
-	return spufs_ps_nopfn(vma, address, 0x14000, 0x1000);
-#elif PAGE_SIZE == 0x10000
+#if SPUFS_SIGNAL_MAP_SIZE == 0x1000
+	return spufs_ps_fault(vma, vmf, 0x14000, SPUFS_SIGNAL_MAP_SIZE);
+#elif SPUFS_SIGNAL_MAP_SIZE == 0x10000
 	/* For 64k pages, both signal1 and signal2 can be used to mmap the whole
 	 * signal 1 and 2 area
 	 */
-	return spufs_ps_nopfn(vma, address, 0x10000, 0x10000);
+	return spufs_ps_fault(vma, vmf, 0x10000, SPUFS_SIGNAL_MAP_SIZE);
 #else
 #error unsupported page size
 #endif
 }
 
 static struct vm_operations_struct spufs_signal1_mmap_vmops = {
-	.nopfn = spufs_signal1_mmap_nopfn,
+	.fault = spufs_signal1_mmap_fault,
 };
 
 static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma)
@@ -1234,23 +1259,23 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf,
 }
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_signal2_mmap_nopfn(struct vm_area_struct *vma,
-					      unsigned long address)
+static int
+spufs_signal2_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-#if PAGE_SIZE == 0x1000
-	return spufs_ps_nopfn(vma, address, 0x1c000, 0x1000);
-#elif PAGE_SIZE == 0x10000
+#if SPUFS_SIGNAL_MAP_SIZE == 0x1000
+	return spufs_ps_fault(vma, vmf, 0x1c000, SPUFS_SIGNAL_MAP_SIZE);
+#elif SPUFS_SIGNAL_MAP_SIZE == 0x10000
 	/* For 64k pages, both signal1 and signal2 can be used to mmap the whole
 	 * signal 1 and 2 area
 	 */
-	return spufs_ps_nopfn(vma, address, 0x10000, 0x10000);
+	return spufs_ps_fault(vma, vmf, 0x10000, SPUFS_SIGNAL_MAP_SIZE);
 #else
 #error unsupported page size
 #endif
 }
 
 static struct vm_operations_struct spufs_signal2_mmap_vmops = {
-	.nopfn = spufs_signal2_mmap_nopfn,
+	.fault = spufs_signal2_mmap_fault,
 };
 
 static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma)
@@ -1362,14 +1387,14 @@ DEFINE_SPUFS_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
 		       spufs_signal2_type_set, "%llu\n", SPU_ATTR_ACQUIRE);
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma,
-					  unsigned long address)
+static int
+spufs_mss_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x0000, 0x1000);
+	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_MSS_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_mss_mmap_vmops = {
-	.nopfn = spufs_mss_mmap_nopfn,
+	.fault = spufs_mss_mmap_fault,
 };
 
 /*
@@ -1424,14 +1449,14 @@ static const struct file_operations spufs_mss_fops = {
 	.mmap	 = spufs_mss_mmap,
 };
 
-static unsigned long spufs_psmap_mmap_nopfn(struct vm_area_struct *vma,
-					    unsigned long address)
+static int
+spufs_psmap_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x0000, 0x20000);
+	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_PS_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_psmap_mmap_vmops = {
-	.nopfn = spufs_psmap_mmap_nopfn,
+	.fault = spufs_psmap_mmap_fault,
 };
 
 /*
@@ -1484,14 +1509,14 @@ static const struct file_operations spufs_psmap_fops = {
 
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_mfc_mmap_nopfn(struct vm_area_struct *vma,
-					  unsigned long address)
+static int
+spufs_mfc_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x3000, 0x1000);
+	return spufs_ps_fault(vma, vmf, 0x3000, SPUFS_MFC_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_mfc_mmap_vmops = {
-	.nopfn = spufs_mfc_mmap_nopfn,
+	.fault = spufs_mfc_mmap_fault,
 };
 
 /*
@@ -2553,22 +2578,74 @@ void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx,
 	wake_up(&ctx->switch_log->wait);
 }
 
-struct tree_descr spufs_dir_contents[] = {
+static int spufs_show_ctx(struct seq_file *s, void *private)
+{
+	struct spu_context *ctx = s->private;
+	u64 mfc_control_RW;
+
+	mutex_lock(&ctx->state_mutex);
+	if (ctx->spu) {
+		struct spu *spu = ctx->spu;
+		struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+		spin_lock_irq(&spu->register_lock);
+		mfc_control_RW = in_be64(&priv2->mfc_control_RW);
+		spin_unlock_irq(&spu->register_lock);
+	} else {
+		struct spu_state *csa = &ctx->csa;
+
+		mfc_control_RW = csa->priv2.mfc_control_RW;
+	}
+
+	seq_printf(s, "%c flgs(%lx) sflgs(%lx) pri(%d) ts(%d) spu(%02d)"
+		" %c %lx %lx %lx %lx %x %x\n",
+		ctx->state == SPU_STATE_SAVED ? 'S' : 'R',
+		ctx->flags,
+		ctx->sched_flags,
+		ctx->prio,
+		ctx->time_slice,
+		ctx->spu ? ctx->spu->number : -1,
+		!list_empty(&ctx->rq) ? 'q' : ' ',
+		ctx->csa.class_0_pending,
+		ctx->csa.class_0_dar,
+		ctx->csa.class_1_dsisr,
+		mfc_control_RW,
+		ctx->ops->runcntl_read(ctx),
+		ctx->ops->status_read(ctx));
+
+	mutex_unlock(&ctx->state_mutex);
+
+	return 0;
+}
+
+static int spufs_ctx_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, spufs_show_ctx, SPUFS_I(inode)->i_ctx);
+}
+
+static const struct file_operations spufs_ctx_fops = {
+	.open           = spufs_ctx_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+struct spufs_tree_descr spufs_dir_contents[] = {
 	{ "capabilities", &spufs_caps_fops, 0444, },
-	{ "mem",  &spufs_mem_fops,  0666, },
-	{ "regs", &spufs_regs_fops,  0666, },
+	{ "mem",  &spufs_mem_fops,  0666, LS_SIZE, },
+	{ "regs", &spufs_regs_fops,  0666, sizeof(struct spu_reg128[128]), },
 	{ "mbox", &spufs_mbox_fops, 0444, },
 	{ "ibox", &spufs_ibox_fops, 0444, },
 	{ "wbox", &spufs_wbox_fops, 0222, },
-	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, },
-	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, },
-	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, },
+	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, sizeof(u32), },
+	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, sizeof(u32), },
+	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, sizeof(u32), },
 	{ "signal1", &spufs_signal1_fops, 0666, },
 	{ "signal2", &spufs_signal2_fops, 0666, },
 	{ "signal1_type", &spufs_signal1_type, 0666, },
 	{ "signal2_type", &spufs_signal2_type, 0666, },
 	{ "cntl", &spufs_cntl_fops,  0666, },
-	{ "fpcr", &spufs_fpcr_fops, 0666, },
+	{ "fpcr", &spufs_fpcr_fops, 0666, sizeof(struct spu_reg128), },
 	{ "lslr", &spufs_lslr_ops, 0444, },
 	{ "mfc", &spufs_mfc_fops, 0666, },
 	{ "mss", &spufs_mss_fops, 0666, },
@@ -2578,29 +2655,31 @@ struct tree_descr spufs_dir_contents[] = {
 	{ "decr_status", &spufs_decr_status_ops, 0666, },
 	{ "event_mask", &spufs_event_mask_ops, 0666, },
 	{ "event_status", &spufs_event_status_ops, 0444, },
-	{ "psmap", &spufs_psmap_fops, 0666, },
+	{ "psmap", &spufs_psmap_fops, 0666, SPUFS_PS_MAP_SIZE, },
 	{ "phys-id", &spufs_id_ops, 0666, },
 	{ "object-id", &spufs_object_id_ops, 0666, },
-	{ "mbox_info", &spufs_mbox_info_fops, 0444, },
-	{ "ibox_info", &spufs_ibox_info_fops, 0444, },
-	{ "wbox_info", &spufs_wbox_info_fops, 0444, },
-	{ "dma_info", &spufs_dma_info_fops, 0444, },
-	{ "proxydma_info", &spufs_proxydma_info_fops, 0444, },
+	{ "mbox_info", &spufs_mbox_info_fops, 0444, sizeof(u32), },
+	{ "ibox_info", &spufs_ibox_info_fops, 0444, sizeof(u32), },
+	{ "wbox_info", &spufs_wbox_info_fops, 0444, sizeof(u32), },
+	{ "dma_info", &spufs_dma_info_fops, 0444,
+		sizeof(struct spu_dma_info), },
+	{ "proxydma_info", &spufs_proxydma_info_fops, 0444,
+		sizeof(struct spu_proxydma_info)},
 	{ "tid", &spufs_tid_fops, 0444, },
 	{ "stat", &spufs_stat_fops, 0444, },
 	{ "switch_log", &spufs_switch_log_fops, 0444 },
 	{},
 };
 
-struct tree_descr spufs_dir_nosched_contents[] = {
+struct spufs_tree_descr spufs_dir_nosched_contents[] = {
 	{ "capabilities", &spufs_caps_fops, 0444, },
-	{ "mem",  &spufs_mem_fops,  0666, },
+	{ "mem",  &spufs_mem_fops,  0666, LS_SIZE, },
 	{ "mbox", &spufs_mbox_fops, 0444, },
 	{ "ibox", &spufs_ibox_fops, 0444, },
 	{ "wbox", &spufs_wbox_fops, 0222, },
-	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, },
-	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, },
-	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, },
+	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, sizeof(u32), },
+	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, sizeof(u32), },
+	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, sizeof(u32), },
 	{ "signal1", &spufs_signal1_nosched_fops, 0222, },
 	{ "signal2", &spufs_signal2_nosched_fops, 0222, },
 	{ "signal1_type", &spufs_signal1_type, 0666, },
@@ -2609,7 +2688,7 @@ struct tree_descr spufs_dir_nosched_contents[] = {
 	{ "mfc", &spufs_mfc_fops, 0666, },
 	{ "cntl", &spufs_cntl_fops,  0666, },
 	{ "npc", &spufs_npc_ops, 0666, },
-	{ "psmap", &spufs_psmap_fops, 0666, },
+	{ "psmap", &spufs_psmap_fops, 0666, SPUFS_PS_MAP_SIZE, },
 	{ "phys-id", &spufs_id_ops, 0666, },
 	{ "object-id", &spufs_object_id_ops, 0666, },
 	{ "tid", &spufs_tid_fops, 0444, },
@@ -2617,6 +2696,11 @@ struct tree_descr spufs_dir_nosched_contents[] = {
 	{},
 };
 
+struct spufs_tree_descr spufs_dir_debug_contents[] = {
+	{ ".ctx", &spufs_ctx_fops, 0444, },
+	{},
+};
+
 struct spufs_coredump_reader spufs_coredump_read[] = {
 	{ "regs", __spufs_regs_read, NULL, sizeof(struct spu_reg128[128])},
 	{ "fpcr", __spufs_fpcr_read, NULL, sizeof(struct spu_reg128) },
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index f407b2471855..690ca7b0dcf6 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -42,10 +42,19 @@
 
 #include "spufs.h"
 
+struct spufs_sb_info {
+	int debug;
+};
+
 static struct kmem_cache *spufs_inode_cache;
 char *isolated_loader;
 static int isolated_loader_size;
 
+static struct spufs_sb_info *spufs_get_sb_info(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
 static struct inode *
 spufs_alloc_inode(struct super_block *sb)
 {
@@ -69,7 +78,7 @@ spufs_destroy_inode(struct inode *inode)
 }
 
 static void
-spufs_init_once(struct kmem_cache *cachep, void *p)
+spufs_init_once(void *p)
 {
 	struct spufs_inode_info *ei = p;
 
@@ -109,7 +118,7 @@ spufs_setattr(struct dentry *dentry, struct iattr *attr)
 static int
 spufs_new_file(struct super_block *sb, struct dentry *dentry,
 		const struct file_operations *fops, int mode,
-		struct spu_context *ctx)
+		size_t size, struct spu_context *ctx)
 {
 	static struct inode_operations spufs_file_iops = {
 		.setattr = spufs_setattr,
@@ -125,6 +134,7 @@ spufs_new_file(struct super_block *sb, struct dentry *dentry,
 	ret = 0;
 	inode->i_op = &spufs_file_iops;
 	inode->i_fop = fops;
+	inode->i_size = size;
 	inode->i_private = SPUFS_I(inode)->i_ctx = get_spu_context(ctx);
 	d_add(dentry, inode);
 out:
@@ -177,7 +187,7 @@ static int spufs_rmdir(struct inode *parent, struct dentry *dir)
 	return simple_rmdir(parent, dir);
 }
 
-static int spufs_fill_dir(struct dentry *dir, struct tree_descr *files,
+static int spufs_fill_dir(struct dentry *dir, struct spufs_tree_descr *files,
 			  int mode, struct spu_context *ctx)
 {
 	struct dentry *dentry, *tmp;
@@ -189,7 +199,7 @@ static int spufs_fill_dir(struct dentry *dir, struct tree_descr *files,
 		if (!dentry)
 			goto out;
 		ret = spufs_new_file(dir->d_sb, dentry, files->ops,
-					files->mode & mode, ctx);
+					files->mode & mode, files->size, ctx);
 		if (ret)
 			goto out;
 		files++;
@@ -279,6 +289,13 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags,
 	if (ret)
 		goto out_free_ctx;
 
+	if (spufs_get_sb_info(dir->i_sb)->debug)
+		ret = spufs_fill_dir(dentry, spufs_dir_debug_contents,
+				mode, ctx);
+
+	if (ret)
+		goto out_free_ctx;
+
 	d_instantiate(dentry, inode);
 	dget(dentry);
 	dir->i_nlink++;
@@ -639,18 +656,19 @@ out:
 
 /* File system initialization */
 enum {
-	Opt_uid, Opt_gid, Opt_mode, Opt_err,
+	Opt_uid, Opt_gid, Opt_mode, Opt_debug, Opt_err,
 };
 
 static match_table_t spufs_tokens = {
-	{ Opt_uid,  "uid=%d" },
-	{ Opt_gid,  "gid=%d" },
-	{ Opt_mode, "mode=%o" },
-	{ Opt_err,   NULL  },
+	{ Opt_uid,   "uid=%d" },
+	{ Opt_gid,   "gid=%d" },
+	{ Opt_mode,  "mode=%o" },
+	{ Opt_debug, "debug" },
+	{ Opt_err,    NULL  },
 };
 
 static int
-spufs_parse_options(char *options, struct inode *root)
+spufs_parse_options(struct super_block *sb, char *options, struct inode *root)
 {
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
@@ -678,6 +696,9 @@ spufs_parse_options(char *options, struct inode *root)
 				return 0;
 			root->i_mode = option | S_IFDIR;
 			break;
+		case Opt_debug:
+			spufs_get_sb_info(sb)->debug = 1;
+			break;
 		default:
 			return 0;
 		}
@@ -736,7 +757,7 @@ spufs_create_root(struct super_block *sb, void *data)
 	SPUFS_I(inode)->i_ctx = NULL;
 
 	ret = -EINVAL;
-	if (!spufs_parse_options(data, inode))
+	if (!spufs_parse_options(sb, data, inode))
 		goto out_iput;
 
 	ret = -ENOMEM;
@@ -754,6 +775,7 @@ out:
 static int
 spufs_fill_super(struct super_block *sb, void *data, int silent)
 {
+	struct spufs_sb_info *info;
 	static struct super_operations s_ops = {
 		.alloc_inode = spufs_alloc_inode,
 		.destroy_inode = spufs_destroy_inode,
@@ -765,11 +787,16 @@ spufs_fill_super(struct super_block *sb, void *data, int silent)
 
 	save_mount_options(sb, data);
 
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
 	sb->s_blocksize = PAGE_CACHE_SIZE;
 	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
 	sb->s_magic = SPUFS_MAGIC;
 	sb->s_op = &s_ops;
+	sb->s_fs_info = info;
 
 	return spufs_create_root(sb, data);
 }
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index e929e70a84e3..2deeeba7eccf 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -312,11 +312,28 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff,
 	 */
 	node = cpu_to_node(raw_smp_processor_id());
 	for (n = 0; n < MAX_NUMNODES; n++, node++) {
+		int available_spus;
+
 		node = (node < MAX_NUMNODES) ? node : 0;
 		if (!node_allowed(ctx, node))
 			continue;
+
+		available_spus = 0;
 		mutex_lock(&cbe_spu_info[node].list_mutex);
 		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
+			if (spu->ctx && spu->ctx->gang
+					&& spu->ctx->aff_offset == 0)
+				available_spus -=
+					(spu->ctx->gang->contexts - 1);
+			else
+				available_spus++;
+		}
+		if (available_spus < ctx->gang->contexts) {
+			mutex_unlock(&cbe_spu_info[node].list_mutex);
+			continue;
+		}
+
+		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
 			if ((!mem_aff || spu->has_mem_affinity) &&
 							sched_spu(spu)) {
 				mutex_unlock(&cbe_spu_info[node].list_mutex);
@@ -389,6 +406,9 @@ static int has_affinity(struct spu_context *ctx)
 	if (list_empty(&ctx->aff_list))
 		return 0;
 
+	if (atomic_read(&ctx->gang->aff_sched_count) == 0)
+		ctx->gang->aff_ref_spu = NULL;
+
 	if (!gang->aff_ref_spu) {
 		if (!(gang->aff_flags & AFF_MERGED))
 			aff_merge_remaining_ctxs(gang);
@@ -416,14 +436,8 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
  	if (spu->ctx->flags & SPU_CREATE_NOSCHED)
 		atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
 
-	if (ctx->gang){
-		mutex_lock(&ctx->gang->aff_mutex);
-		if (has_affinity(ctx)) {
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-		}
-		mutex_unlock(&ctx->gang->aff_mutex);
-	}
+	if (ctx->gang)
+		atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
 	spu_switch_notify(spu, NULL);
 	spu_unmap_mappings(ctx);
@@ -562,10 +576,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx)
 				goto found;
 			mutex_unlock(&cbe_spu_info[node].list_mutex);
 
-			mutex_lock(&ctx->gang->aff_mutex);
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-			mutex_unlock(&ctx->gang->aff_mutex);
+			atomic_dec(&ctx->gang->aff_sched_count);
 			goto not_found;
 		}
 		mutex_unlock(&ctx->gang->aff_mutex);
@@ -899,7 +910,8 @@ static noinline void spusched_tick(struct spu_context *ctx)
 			spu_add_to_rq(ctx);
 	} else {
 		spu_context_nospu_trace(spusched_tick__newslice, ctx);
-		ctx->time_slice++;
+		if (!ctx->time_slice)
+			ctx->time_slice++;
 	}
 out:
 	spu_release(ctx);
@@ -993,6 +1005,7 @@ void spuctx_switch_state(struct spu_context *ctx,
 	struct timespec ts;
 	struct spu *spu;
 	enum spu_utilization_state old_state;
+	int node;
 
 	ktime_get_ts(&ts);
 	curtime = timespec_to_ns(&ts);
@@ -1014,6 +1027,11 @@ void spuctx_switch_state(struct spu_context *ctx,
 		spu->stats.times[old_state] += delta;
 		spu->stats.util_state = new_state;
 		spu->stats.tstamp = curtime;
+		node = spu->node;
+		if (old_state == SPU_UTIL_USER)
+			atomic_dec(&cbe_spu_info[node].busy_spus);
+		if (new_state == SPU_UTIL_USER);
+			atomic_inc(&cbe_spu_info[node].busy_spus);
 	}
 }
 
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 454c277c1457..8ae8ef9dfc22 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -32,6 +32,13 @@
 #include <asm/spu_csa.h>
 #include <asm/spu_info.h>
 
+#define SPUFS_PS_MAP_SIZE	0x20000
+#define SPUFS_MFC_MAP_SIZE	0x1000
+#define SPUFS_CNTL_MAP_SIZE	0x1000
+#define SPUFS_CNTL_MAP_SIZE	0x1000
+#define SPUFS_SIGNAL_MAP_SIZE	PAGE_SIZE
+#define SPUFS_MSS_MAP_SIZE	0x1000
+
 /* The magic number for our file system */
 enum {
 	SPUFS_MAGIC = 0x23c9b64e,
@@ -228,8 +235,16 @@ struct spufs_inode_info {
 #define SPUFS_I(inode) \
 	container_of(inode, struct spufs_inode_info, vfs_inode)
 
-extern struct tree_descr spufs_dir_contents[];
-extern struct tree_descr spufs_dir_nosched_contents[];
+struct spufs_tree_descr {
+	const char *name;
+	const struct file_operations *ops;
+	int mode;
+	size_t size;
+};
+
+extern struct spufs_tree_descr spufs_dir_contents[];
+extern struct spufs_tree_descr spufs_dir_nosched_contents[];
+extern struct spufs_tree_descr spufs_dir_debug_contents[];
 
 /* system call implementation */
 extern struct spufs_calls spufs_calls;
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 53202422ba72..92d20e993ede 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -182,10 +182,10 @@ struct spu_probe spu_probes[] = {
 	{ "spu_yield__enter", "ctx %p", spu_context_nospu_event },
 	{ "spu_deactivate__enter", "ctx %p", spu_context_nospu_event },
 	{ "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_nopfn__enter", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_nopfn__sleep", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_nopfn__wake", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_nopfn__insert", "ctx %p spu %p", spu_context_event },
+	{ "spufs_ps_fault__enter", "ctx %p", spu_context_nospu_event },
+	{ "spufs_ps_fault__sleep", "ctx %p", spu_context_nospu_event },
+	{ "spufs_ps_fault__wake", "ctx %p spu %p", spu_context_event },
+	{ "spufs_ps_fault__insert", "ctx %p spu %p", spu_context_event },
 	{ "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event },
 	{ "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event },
 	{ "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event },
@@ -196,8 +196,7 @@ static int __init sputrace_init(void)
 	struct proc_dir_entry *entry;
 	int i, error = -ENOMEM;
 
-	sputrace_log = kcalloc(sizeof(struct sputrace),
-				bufsize, GFP_KERNEL);
+	sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL);
 	if (!sputrace_log)
 		goto out;
 
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 609c46db4a1b..768c262b9368 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -367,7 +367,7 @@ static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
 	viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
 	if (!viaisa)
 		return;
-	printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id);
+	dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
 
 	pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
 	pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 116babbaaf81..1ba7ce5aafae 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -63,13 +63,6 @@ static struct mpic *chrp_mpic;
 DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
 unsigned long event_scan_interval;
 
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems.  -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *);
-
 extern unsigned long loops_per_jiffy;
 
 /* To be replaced by RTAS when available */
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 429088967813..4f9f8184d164 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -59,6 +59,16 @@ config PPC_PRPMC2800
 	help
 	  This option enables support for the Motorola PrPMC2800 board
 
+config PPC_C2K
+	bool "SBS/GEFanuc C2K board"
+	depends on EMBEDDED6xx
+	select MV64X60
+	select NOT_COHERENT_CACHE
+	select MTD_CFI_I4
+	help
+	  This option enables support for the GE Fanuc C2K board (formerly
+	  an SBS board).
+
 config TSI108_BRIDGE
 	bool
 	select PCI
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 06524d3ffd2e..0773c08bd444 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_LINKSTATION)	+= linkstation.o ls_uart.o
 obj-$(CONFIG_STORCENTER)	+= storcenter.o
 obj-$(CONFIG_PPC_HOLLY)		+= holly.o
 obj-$(CONFIG_PPC_PRPMC2800)	+= prpmc2800.o
+obj-$(CONFIG_PPC_C2K)		+= c2k.o
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
new file mode 100644
index 000000000000..d0b25b8c39d1
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/c2k.c
@@ -0,0 +1,158 @@
+/*
+ * Board setup routines for the GEFanuc C2K board
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.c
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/kexec.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/time.h>
+
+#include <mm/mmu_decl.h>
+
+#include <sysdev/mv64x60.h>
+
+#define MV64x60_MPP_CNTL_0	0x0000
+#define MV64x60_MPP_CNTL_2	0x0008
+
+#define MV64x60_GPP_IO_CNTL	0x0000
+#define MV64x60_GPP_LEVEL_CNTL	0x0010
+#define MV64x60_GPP_VALUE_SET	0x0018
+
+static void __iomem *mv64x60_mpp_reg_base;
+static void __iomem *mv64x60_gpp_reg_base;
+
+static void __init c2k_setup_arch(void)
+{
+	struct device_node *np;
+	phys_addr_t paddr;
+	const unsigned int *reg;
+
+	/*
+	 * ioremap mpp and gpp registers in case they are later
+	 * needed by c2k_reset_board().
+	 */
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
+	reg = of_get_property(np, "reg", NULL);
+	paddr = of_translate_address(np, reg);
+	of_node_put(np);
+	mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
+
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
+	reg = of_get_property(np, "reg", NULL);
+	paddr = of_translate_address(np, reg);
+	of_node_put(np);
+	mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
+
+#ifdef CONFIG_PCI
+	mv64x60_pci_init();
+#endif
+}
+
+static void c2k_reset_board(void)
+{
+	u32 temp;
+
+	local_irq_disable();
+
+	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
+	temp &= 0xFFFF0FFF;
+	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+	temp |= 0x00000004;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+	temp |= 0x00000004;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
+	temp &= 0xFFFF0FFF;
+	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+	temp |= 0x00080000;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+	temp |= 0x00080000;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
+}
+
+static void c2k_restart(char *cmd)
+{
+	c2k_reset_board();
+	msleep(100);
+	panic("restart failed\n");
+}
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define COHERENCY_SETTING "off"
+#else
+#define COHERENCY_SETTING "on"
+#endif
+
+void c2k_show_cpuinfo(struct seq_file *m)
+{
+	uint memsize = total_memory;
+
+	seq_printf(m, "Vendor\t\t: GEFanuc\n");
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+	seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init c2k_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "GEFanuc,C2K"))
+		return 0;
+
+	printk(KERN_INFO "Detected a GEFanuc C2K board\n");
+
+	_set_L2CR(0);
+	_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I);
+	return 1;
+}
+
+define_machine(c2k) {
+	.name			= "C2K",
+	.probe			= c2k_probe,
+	.setup_arch		= c2k_setup_arch,
+	.init_early		= mv64x60_init_early,
+	.show_cpuinfo		= c2k_show_cpuinfo,
+	.init_IRQ		= mv64x60_init_irq,
+	.get_irq		= mv64x60_get_irq,
+	.restart		= c2k_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+#ifdef CONFIG_KEXEC
+	.machine_kexec		= default_machine_kexec,
+	.machine_kexec_prepare	= default_machine_kexec_prepare,
+	.machine_crash_shutdown	= default_machine_crash_shutdown,
+#endif
+};
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index afc9141be63e..ef74a0763ec1 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = {
 	ULI_8259_NONE,		/* PIRQH */
 };
 
-/* set in board code if you want this quirks to do something */
-int uses_fsl_uli_m1575;
-
 /* Bridge */
 static void __devinit early_uli5249(struct pci_dev *dev)
 {
 	unsigned char temp;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
 	int i;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	/*
@@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
 	 * IRQ 14: Edge
 	 * IRQ 15: Edge
 	 */
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	outb(0xfa, 0x4d0);
@@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
 	unsigned char c;
 	unsigned int d;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	/* read/write lock */
@@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
 {
 	unsigned short temp;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -221,7 +223,7 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		if ((bus->resource[i]) &&
 			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			dummy = ioremap(bus->resource[i]->start, 0x4);
+			dummy = ioremap(bus->resource[i]->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
@@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
 
+static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
+{
+	u32 temp32;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	/* Disable INTx */
+	pci_read_config_dword(dev, 0x48, &temp32);
+	pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
+
+	/* Enable sideband interrupt */
+	pci_read_config_dword(dev, 0x90, &temp32);
+	pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
+}
+
+static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
+{
+	unsigned char c;
+	unsigned short temp;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	/* Interrupt Disable, Needed when SATA disabled */
+	pci_read_config_word(dev, PCI_COMMAND, &temp);
+	temp |= 1<<10;
+	pci_write_config_word(dev, PCI_COMMAND, temp);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c |= 0x80;
+	pci_write_config_byte(dev, 0x83, c);
+
+	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+	pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c &= 0x7f;
+	pci_write_config_byte(dev, 0x83, c);
+}
+
+/*
+ * Since 8259PIC was disabled on the board, the IDE device can not
+ * use the legacy IRQ, we need to let the IDE device work under
+ * native mode and use the interrupt line like other PCI devices.
+ * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
+ * as the interrupt for IDE device.
+ */
+static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev)
+{
+	unsigned char c;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	pci_read_config_byte(dev, 0x4b, &c);
+	c |= 0x10;
+	pci_write_config_byte(dev, 0x4b, c);
+}
+
+/*
+ * SATA interrupt pin bug fix
+ * There's a chip bug for 5288, The interrupt pin should be 2,
+ * not the read only value 1, So it use INTB#, not INTA# which
+ * actually used by the IDE device 5229.
+ * As of this bug, during the PCI initialization, 5288 read the
+ * irq of IDE device from the device tree, this function fix this
+ * bug by re-assigning a correct irq to 5288.
+ *
+ */
+static void __devinit hpcd_final_uli5288(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct device_node *hosenode = hose ? hose->dn : NULL;
+	struct of_irq oirq;
+	int virq, pin = 2;
+	u32 laddr[3];
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	if (!hosenode)
+		return;
+
+	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
+	laddr[1] = laddr[2] = 0;
+	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+				     oirq.size);
+	dev->irq = virq;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
+
 int uli_exclude_device(struct pci_controller *hose,
 			u_char bus, u_char devfn)
 {
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 761d9e971fc4..ea3e541ac74f 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -2,6 +2,7 @@ config PPC_ISERIES
 	bool "IBM Legacy iSeries"
 	depends on PPC_MULTIPLATFORM && PPC64
 	select PPC_INDIRECT_IO
+	select PPC_PCI_CHOICE if EMBEDDED
 
 menu "iSeries device drivers"
 	depends on PPC_ISERIES
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 11fa3c772ed5..bb464d1211b2 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -41,8 +41,9 @@
 #include <asm/iseries/hv_call_event.h>
 #include <asm/iseries/iommu.h>
 
-static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
-		unsigned long uaddr, enum dma_data_direction direction)
+static int tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
+		unsigned long uaddr, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	u64 rc;
 	u64 tce, rpn;
@@ -70,6 +71,7 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 		index++;
 		uaddr += TCE_PAGE_SIZE;
 	}
+	return 0;
 }
 
 static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages)
@@ -214,13 +216,13 @@ dma_addr_t iseries_hv_map(void *vaddr, size_t size,
 			enum dma_data_direction direction)
 {
 	return iommu_map_single(NULL, &vio_iommu_table, vaddr, size,
-				DMA_32BIT_MASK, direction);
+				DMA_32BIT_MASK, direction, NULL);
 }
 
 void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
 			enum dma_data_direction direction)
 {
-	iommu_unmap_single(&vio_iommu_table, dma_handle, size, direction);
+	iommu_unmap_single(&vio_iommu_table, dma_handle, size, direction, NULL);
 }
 
 void __init iommu_vio_init(void)
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 1dc7295746da..731d7b157749 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -871,7 +871,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off,
 		count = 256 - off;
 
 	dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dma_addr))
+	if (dma_mapping_error(NULL, dma_addr))
 		return -ENOMEM;
 	memset(page, 0, off + count);
 	memset(&vsp_cmd, 0, sizeof(vsp_cmd));
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index b72120751bbe..70b688c1aefb 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -561,7 +561,7 @@ static void yield_shared_processor(void)
 static void iseries_shared_idle(void)
 {
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched() && !hvlpevent_is_pending()) {
 			local_irq_disable();
 			ppc64_runlatch_off();
@@ -591,7 +591,7 @@ static void iseries_dedicated_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		if (!need_resched()) {
 			while (!need_resched()) {
 				ppc64_runlatch_off();
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 9f7579b38c72..53bca132fb48 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -41,8 +41,6 @@
 #define DBG(x...)
 #endif
 
-extern void GregorianDay(struct rtc_time * tm);
-
 static int maple_rtc_addr;
 
 static int maple_clock_read(int addr)
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 86967bdd8774..a0ff03a3d8da 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -83,9 +83,10 @@ static u32 *iob_l2_base;
 static struct iommu_table iommu_table_iobmap;
 static int iommu_table_iobmap_inited;
 
-static void iobmap_build(struct iommu_table *tbl, long index,
+static int iobmap_build(struct iommu_table *tbl, long index,
 			 long npages, unsigned long uaddr,
-			 enum dma_data_direction direction)
+			 enum dma_data_direction direction,
+			 struct dma_attrs *attrs)
 {
 	u32 *ip;
 	u32 rpn;
@@ -107,6 +108,7 @@ static void iobmap_build(struct iommu_table *tbl, long index,
 		uaddr += IOBMAP_PAGE_SIZE;
 		bus_addr += IOBMAP_PAGE_SIZE;
 	}
+	return 0;
 }
 
 
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 4d72c8f72159..89774177b209 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -1,5 +1,10 @@
 CFLAGS_bootx_init.o  		+= -fPIC
 
+ifdef CONFIG_FTRACE
+# Do not trace early boot code
+CFLAGS_REMOVE_bootx_init.o = -pg
+endif
+
 obj-y				+= pic.o setup.o time.o feature.o pci.o \
 				   sleep.o low_i2c.o cache.o pfunc_core.o \
 				   pfunc_base.o
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 829b8b02527b..6d149ae8ffa7 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -34,16 +34,10 @@
 #include <asm/time.h>
 #include <asm/pmac_feature.h>
 #include <asm/mpic.h>
+#include <asm/xmon.h>
 
 #include "pmac.h"
 
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems.  -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *);
-
 #ifdef CONFIG_PPC32
 struct pmac_irq_hw {
         unsigned int    event;
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 00bd0166d07f..31635446901a 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -97,8 +97,6 @@ extern struct machdep_calls pmac_md;
 int sccdbg;
 #endif
 
-extern void zs_kgdb_hook(int tty_num);
-
 sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
 EXPORT_SYMBOL(sys_ctrler);
 
@@ -329,10 +327,6 @@ static void __init pmac_setup_arch(void)
 	l2cr_init();
 #endif /* CONFIG_PPC32 */
 
-#ifdef CONFIG_KGDB
-	zs_kgdb_hook(0);
-#endif
-
 	find_via_cuda();
 	find_via_pmu();
 	smu_init();
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cb2d894541c6..4ae3d00e0bdd 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -36,6 +36,7 @@
 
 #include <asm/ptrace.h>
 #include <asm/atomic.h>
+#include <asm/code-patching.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -786,8 +787,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 {
 	unsigned int save_vector;
 	unsigned long target, flags;
-	volatile unsigned int *vector
-		 = ((volatile unsigned int *)(KERNELBASE+0x100));
+	unsigned int *vector = (unsigned int *)(KERNELBASE+0x100);
 
 	if (nr < 0 || nr > 3)
 		return;
@@ -804,7 +804,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 	 *   b __secondary_start_pmac_0 + nr*8 - KERNELBASE
 	 */
 	target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
-	create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
+	patch_branch(vector, target, BRANCH_SET_LINK);
 
 	/* Put some life in our friend */
 	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index a5f4e95dfc3d..920cf7a454b1 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -8,6 +8,7 @@ config PPC_PS3
 	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select MEMORY_HOTPLUG
+	select PPC_PCI_CHOICE
 	help
 	  This option enables support for the Sony PS3 game console
 	  and other platforms using the PS3 hypervisor.  Enabling this
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 3866debfa3c4..ffdd8e963fbd 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -486,6 +486,7 @@ static int __init ps3_register_graphics_devices(void)
 		return -ENOMEM;
 
 	p->dev.match_id = PS3_MATCH_ID_GRAPHICS;
+	p->dev.match_sub_id = PS3_MATCH_SUB_ID_FB;
 	p->dev.dev_type = PS3_DEVICE_TYPE_IOC0;
 
 	result = ps3_system_bus_device_register(&p->dev);
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index f0b12f212363..a0927a3bacb7 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -105,9 +105,10 @@ static void __init ps3_smp_setup_cpu(int cpu)
 	 * to index needs to be setup.
 	 */
 
-	BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION  != 0);
-	BUILD_BUG_ON(PPC_MSG_RESCHEDULE     != 1);
-	BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
+	BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION    != 0);
+	BUILD_BUG_ON(PPC_MSG_RESCHEDULE       != 1);
+	BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
+	BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK   != 3);
 
 	for (i = 0; i < MSG_COUNT; i++) {
 		result = ps3_event_receive_port_setup(cpu, &virqs[i]);
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 43c493fca2d0..280ee88cb0b0 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -347,11 +347,23 @@ static int ps3_system_bus_match(struct device *_dev,
 	struct ps3_system_bus_driver *drv = ps3_drv_to_system_bus_drv(_drv);
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 
-	result = dev->match_id == drv->match_id;
+	if (!dev->match_sub_id)
+		result = dev->match_id == drv->match_id;
+	else
+		result = dev->match_sub_id == drv->match_sub_id &&
+			dev->match_id == drv->match_id;
+
+	if (result)
+		pr_info("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): match\n",
+			__func__, __LINE__,
+			dev->match_id, dev->match_sub_id, dev->core.bus_id,
+			drv->match_id, drv->match_sub_id, drv->core.name);
+	else
+		pr_debug("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): miss\n",
+			__func__, __LINE__,
+			dev->match_id, dev->match_sub_id, dev->core.bus_id,
+			drv->match_id, drv->match_sub_id, drv->core.name);
 
-	pr_info("%s:%d: dev=%u(%s), drv=%u(%s): %s\n", __func__, __LINE__,
-		dev->match_id, dev->core.bus_id, drv->match_id, drv->core.name,
-		(result ? "match" : "miss"));
 	return result;
 }
 
@@ -362,7 +374,7 @@ static int ps3_system_bus_probe(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_info(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);
@@ -370,10 +382,10 @@ static int ps3_system_bus_probe(struct device *_dev)
 	if (drv->probe)
 		result = drv->probe(dev);
 	else
-		pr_info("%s:%d: %s no probe method\n", __func__, __LINE__,
+		pr_debug("%s:%d: %s no probe method\n", __func__, __LINE__,
 			dev->core.bus_id);
 
-	pr_info(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
+	pr_debug(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
 	return result;
 }
 
@@ -384,7 +396,7 @@ static int ps3_system_bus_remove(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_info(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);
@@ -395,7 +407,7 @@ static int ps3_system_bus_remove(struct device *_dev)
 		dev_dbg(&dev->core, "%s:%d %s: no remove method\n",
 			__func__, __LINE__, drv->core.name);
 
-	pr_info(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
+	pr_debug(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
 	return result;
 }
 
@@ -550,7 +562,7 @@ static void ps3_free_coherent(struct device *_dev, size_t size, void *vaddr,
  */
 
 static dma_addr_t ps3_sb_map_single(struct device *_dev, void *ptr, size_t size,
-	enum dma_data_direction direction)
+	enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
@@ -570,7 +582,8 @@ static dma_addr_t ps3_sb_map_single(struct device *_dev, void *ptr, size_t size,
 
 static dma_addr_t ps3_ioc0_map_single(struct device *_dev, void *ptr,
 				      size_t size,
-				      enum dma_data_direction direction)
+				      enum dma_data_direction direction,
+				      struct dma_attrs *attrs)
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
@@ -603,7 +616,7 @@ static dma_addr_t ps3_ioc0_map_single(struct device *_dev, void *ptr,
 }
 
 static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
+	size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
@@ -617,7 +630,7 @@ static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr,
 }
 
 static int ps3_sb_map_sg(struct device *_dev, struct scatterlist *sgl,
-	int nents, enum dma_data_direction direction)
+	int nents, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 #if defined(CONFIG_PS3_DYNAMIC_DMA)
 	BUG_ON("do");
@@ -646,14 +659,15 @@ static int ps3_sb_map_sg(struct device *_dev, struct scatterlist *sgl,
 
 static int ps3_ioc0_map_sg(struct device *_dev, struct scatterlist *sg,
 			   int nents,
-			   enum dma_data_direction direction)
+			   enum dma_data_direction direction,
+			   struct dma_attrs *attrs)
 {
 	BUG();
 	return 0;
 }
 
 static void ps3_sb_unmap_sg(struct device *_dev, struct scatterlist *sg,
-	int nents, enum dma_data_direction direction)
+	int nents, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 #if defined(CONFIG_PS3_DYNAMIC_DMA)
 	BUG_ON("do");
@@ -661,7 +675,8 @@ static void ps3_sb_unmap_sg(struct device *_dev, struct scatterlist *sg,
 }
 
 static void ps3_ioc0_unmap_sg(struct device *_dev, struct scatterlist *sg,
-			    int nents, enum dma_data_direction direction)
+			    int nents, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
 	BUG();
 }
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 07fe5b69b9e2..97619fd51e39 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -7,6 +7,7 @@ config PPC_PSERIES
 	select RTAS_ERROR_LOGGING
 	select PPC_UDBG_16550
 	select PPC_NATIVE
+	select PPC_PCI_CHOICE if EMBEDDED
 	default y
 
 config PPC_SPLPAR
@@ -39,3 +40,26 @@ config PPC_PSERIES_DEBUG
 	depends on PPC_PSERIES && PPC_EARLY_DEBUG
 	bool "Enable extra debug logging in platforms/pseries"
 	default y
+
+config PPC_SMLPAR
+	bool "Support for shared-memory logical partitions"
+	depends on PPC_PSERIES
+	select LPARCFG
+	default n
+	help
+	  Select this option to enable shared memory partition support.
+	  With this option a system running in an LPAR can be given more
+	  memory than physically available and will allow firmware to
+	  balance memory across many LPARs.
+
+config CMM
+	tristate "Collaborative memory management"
+	depends on PPC_SMLPAR
+	default y
+	help
+	  Select this option, if you want to enable the kernel interface
+	  to reduce the memory size of the system. This is accomplished
+	  by allocating pages of memory and put them "on hold". This only
+	  makes sense for a system running in an LPAR where the unused pages
+	  will be reused for other LPARs. The interface allows firmware to
+	  balance memory across many LPARs.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 554c6e42ef2a..dfe574af2dc0 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
 obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
+obj-$(CONFIG_CMM)		+= cmm.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
new file mode 100644
index 000000000000..c6b3be03168b
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -0,0 +1,468 @@
+/*
+ * Collaborative memory management interface.
+ *
+ * Copyright (C) 2008 IBM Corporation
+ * Author(s): Brian King (brking@linux.vnet.ibm.com),
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/oom.h>
+#include <linux/sched.h>
+#include <linux/stringify.h>
+#include <linux/swap.h>
+#include <linux/sysdev.h>
+#include <asm/firmware.h>
+#include <asm/hvcall.h>
+#include <asm/mmu.h>
+#include <asm/pgalloc.h>
+#include <asm/uaccess.h>
+
+#include "plpar_wrappers.h"
+
+#define CMM_DRIVER_VERSION	"1.0.0"
+#define CMM_DEFAULT_DELAY	1
+#define CMM_DEBUG			0
+#define CMM_DISABLE		0
+#define CMM_OOM_KB		1024
+#define CMM_MIN_MEM_MB		256
+#define KB2PAGES(_p)		((_p)>>(PAGE_SHIFT-10))
+#define PAGES2KB(_p)		((_p)<<(PAGE_SHIFT-10))
+
+static unsigned int delay = CMM_DEFAULT_DELAY;
+static unsigned int oom_kb = CMM_OOM_KB;
+static unsigned int cmm_debug = CMM_DEBUG;
+static unsigned int cmm_disabled = CMM_DISABLE;
+static unsigned long min_mem_mb = CMM_MIN_MEM_MB;
+static struct sys_device cmm_sysdev;
+
+MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CMM_DRIVER_VERSION);
+
+module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. "
+		 "[Default=" __stringify(CMM_DEFAULT_DELAY) "]");
+module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. "
+		 "[Default=" __stringify(CMM_OOM_KB) "]");
+module_param_named(min_mem_mb, min_mem_mb, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(min_mem_mb, "Minimum amount of memory (in MB) to not balloon. "
+		 "[Default=" __stringify(CMM_MIN_MEM_MB) "]");
+module_param_named(debug, cmm_debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable module debugging logging. Set to 1 to enable. "
+		 "[Default=" __stringify(CMM_DEBUG) "]");
+
+#define CMM_NR_PAGES ((PAGE_SIZE - sizeof(void *) - sizeof(unsigned long)) / sizeof(unsigned long))
+
+#define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); }
+
+struct cmm_page_array {
+	struct cmm_page_array *next;
+	unsigned long index;
+	unsigned long page[CMM_NR_PAGES];
+};
+
+static unsigned long loaned_pages;
+static unsigned long loaned_pages_target;
+static unsigned long oom_freed_pages;
+
+static struct cmm_page_array *cmm_page_list;
+static DEFINE_SPINLOCK(cmm_lock);
+
+static struct task_struct *cmm_thread_ptr;
+
+/**
+ * cmm_alloc_pages - Allocate pages and mark them as loaned
+ * @nr:	number of pages to allocate
+ *
+ * Return value:
+ * 	number of pages requested to be allocated which were not
+ **/
+static long cmm_alloc_pages(long nr)
+{
+	struct cmm_page_array *pa, *npa;
+	unsigned long addr;
+	long rc;
+
+	cmm_dbg("Begin request for %ld pages\n", nr);
+
+	while (nr) {
+		addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
+				       __GFP_NORETRY | __GFP_NOMEMALLOC);
+		if (!addr)
+			break;
+		spin_lock(&cmm_lock);
+		pa = cmm_page_list;
+		if (!pa || pa->index >= CMM_NR_PAGES) {
+			/* Need a new page for the page list. */
+			spin_unlock(&cmm_lock);
+			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
+								       __GFP_NORETRY | __GFP_NOMEMALLOC);
+			if (!npa) {
+				pr_info("%s: Can not allocate new page list\n", __FUNCTION__);
+				free_page(addr);
+				break;
+			}
+			spin_lock(&cmm_lock);
+			pa = cmm_page_list;
+
+			if (!pa || pa->index >= CMM_NR_PAGES) {
+				npa->next = pa;
+				npa->index = 0;
+				pa = npa;
+				cmm_page_list = pa;
+			} else
+				free_page((unsigned long) npa);
+		}
+
+		if ((rc = plpar_page_set_loaned(__pa(addr)))) {
+			pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc);
+			spin_unlock(&cmm_lock);
+			free_page(addr);
+			break;
+		}
+
+		pa->page[pa->index++] = addr;
+		loaned_pages++;
+		totalram_pages--;
+		spin_unlock(&cmm_lock);
+		nr--;
+	}
+
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_free_pages - Free pages and mark them as active
+ * @nr:	number of pages to free
+ *
+ * Return value:
+ * 	number of pages requested to be freed which were not
+ **/
+static long cmm_free_pages(long nr)
+{
+	struct cmm_page_array *pa;
+	unsigned long addr;
+
+	cmm_dbg("Begin free of %ld pages.\n", nr);
+	spin_lock(&cmm_lock);
+	pa = cmm_page_list;
+	while (nr) {
+		if (!pa || pa->index <= 0)
+			break;
+		addr = pa->page[--pa->index];
+
+		if (pa->index == 0) {
+			pa = pa->next;
+			free_page((unsigned long) cmm_page_list);
+			cmm_page_list = pa;
+		}
+
+		plpar_page_set_active(__pa(addr));
+		free_page(addr);
+		loaned_pages--;
+		nr--;
+		totalram_pages++;
+	}
+	spin_unlock(&cmm_lock);
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_oom_notify - OOM notifier
+ * @self:	notifier block struct
+ * @dummy:	not used
+ * @parm:	returned - number of pages freed
+ *
+ * Return value:
+ * 	NOTIFY_OK
+ **/
+static int cmm_oom_notify(struct notifier_block *self,
+			  unsigned long dummy, void *parm)
+{
+	unsigned long *freed = parm;
+	long nr = KB2PAGES(oom_kb);
+
+	cmm_dbg("OOM processing started\n");
+	nr = cmm_free_pages(nr);
+	loaned_pages_target = loaned_pages;
+	*freed += KB2PAGES(oom_kb) - nr;
+	oom_freed_pages += KB2PAGES(oom_kb) - nr;
+	cmm_dbg("OOM processing complete\n");
+	return NOTIFY_OK;
+}
+
+/**
+ * cmm_get_mpp - Read memory performance parameters
+ *
+ * Makes hcall to query the current page loan request from the hypervisor.
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_get_mpp(void)
+{
+	int rc;
+	struct hvcall_mpp_data mpp_data;
+	unsigned long active_pages_target;
+	signed long page_loan_request;
+
+	rc = h_get_mpp(&mpp_data);
+
+	if (rc != H_SUCCESS)
+		return;
+
+	page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE);
+	loaned_pages_target = page_loan_request + loaned_pages;
+	if (loaned_pages_target > oom_freed_pages)
+		loaned_pages_target -= oom_freed_pages;
+	else
+		loaned_pages_target = 0;
+
+	active_pages_target = totalram_pages + loaned_pages - loaned_pages_target;
+
+	if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE))
+		loaned_pages_target = totalram_pages + loaned_pages -
+			((min_mem_mb * 1024 * 1024) / PAGE_SIZE);
+
+	cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
+		page_loan_request, loaned_pages, loaned_pages_target,
+		oom_freed_pages, totalram_pages);
+}
+
+static struct notifier_block cmm_oom_nb = {
+	.notifier_call = cmm_oom_notify
+};
+
+/**
+ * cmm_thread - CMM task thread
+ * @dummy:	not used
+ *
+ * Return value:
+ * 	0
+ **/
+static int cmm_thread(void *dummy)
+{
+	unsigned long timeleft;
+
+	while (1) {
+		timeleft = msleep_interruptible(delay * 1000);
+
+		if (kthread_should_stop() || timeleft) {
+			loaned_pages_target = loaned_pages;
+			break;
+		}
+
+		cmm_get_mpp();
+
+		if (loaned_pages_target > loaned_pages) {
+			if (cmm_alloc_pages(loaned_pages_target - loaned_pages))
+				loaned_pages_target = loaned_pages;
+		} else if (loaned_pages_target < loaned_pages)
+			cmm_free_pages(loaned_pages - loaned_pages_target);
+	}
+	return 0;
+}
+
+#define CMM_SHOW(name, format, args...)			\
+	static ssize_t show_##name(struct sys_device *dev, char *buf)	\
+	{							\
+		return sprintf(buf, format, ##args);		\
+	}							\
+	static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL)
+
+CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
+CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
+
+static ssize_t show_oom_pages(struct sys_device *dev, char *buf)
+{
+	return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
+}
+
+static ssize_t store_oom_pages(struct sys_device *dev,
+			       const char *buf, size_t count)
+{
+	unsigned long val = simple_strtoul (buf, NULL, 10);
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	if (val != 0)
+		return -EBADMSG;
+
+	oom_freed_pages = 0;
+	return count;
+}
+
+static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO,
+		   show_oom_pages, store_oom_pages);
+
+static struct sysdev_attribute *cmm_attrs[] = {
+	&attr_loaned_kb,
+	&attr_loaned_target_kb,
+	&attr_oom_freed_kb,
+};
+
+static struct sysdev_class cmm_sysdev_class = {
+	.name = "cmm",
+};
+
+/**
+ * cmm_sysfs_register - Register with sysfs
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_sysfs_register(struct sys_device *sysdev)
+{
+	int i, rc;
+
+	if ((rc = sysdev_class_register(&cmm_sysdev_class)))
+		return rc;
+
+	sysdev->id = 0;
+	sysdev->cls = &cmm_sysdev_class;
+
+	if ((rc = sysdev_register(sysdev)))
+		goto class_unregister;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) {
+		if ((rc = sysdev_create_file(sysdev, cmm_attrs[i])))
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	while (--i >= 0)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+class_unregister:
+	sysdev_class_unregister(&cmm_sysdev_class);
+	return rc;
+}
+
+/**
+ * cmm_unregister_sysfs - Unregister from sysfs
+ *
+ **/
+static void cmm_unregister_sysfs(struct sys_device *sysdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+	sysdev_class_unregister(&cmm_sysdev_class);
+}
+
+/**
+ * cmm_init - Module initialization
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_init(void)
+{
+	int rc = -ENOMEM;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return -EOPNOTSUPP;
+
+	if ((rc = register_oom_notifier(&cmm_oom_nb)) < 0)
+		return rc;
+
+	if ((rc = cmm_sysfs_register(&cmm_sysdev)))
+		goto out_oom_notifier;
+
+	if (cmm_disabled)
+		return rc;
+
+	cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+	if (IS_ERR(cmm_thread_ptr)) {
+		rc = PTR_ERR(cmm_thread_ptr);
+		goto out_unregister_sysfs;
+	}
+
+	return rc;
+
+out_unregister_sysfs:
+	cmm_unregister_sysfs(&cmm_sysdev);
+out_oom_notifier:
+	unregister_oom_notifier(&cmm_oom_nb);
+	return rc;
+}
+
+/**
+ * cmm_exit - Module exit
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_exit(void)
+{
+	if (cmm_thread_ptr)
+		kthread_stop(cmm_thread_ptr);
+	unregister_oom_notifier(&cmm_oom_nb);
+	cmm_free_pages(loaned_pages);
+	cmm_unregister_sysfs(&cmm_sysdev);
+}
+
+/**
+ * cmm_set_disable - Disable/Enable CMM
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_set_disable(const char *val, struct kernel_param *kp)
+{
+	int disable = simple_strtoul(val, NULL, 10);
+
+	if (disable != 0 && disable != 1)
+		return -EINVAL;
+
+	if (disable && !cmm_disabled) {
+		if (cmm_thread_ptr)
+			kthread_stop(cmm_thread_ptr);
+		cmm_thread_ptr = NULL;
+		cmm_free_pages(loaned_pages);
+	} else if (!disable && cmm_disabled) {
+		cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+		if (IS_ERR(cmm_thread_ptr))
+			return PTR_ERR(cmm_thread_ptr);
+	}
+
+	cmm_disabled = disable;
+	return 0;
+}
+
+module_param_call(disable, cmm_set_disable, param_get_uint,
+		  &cmm_disabled, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable, "Disable CMM. Set to 1 to disable. "
+		 "[Default=" __stringify(CMM_DISABLE) "]");
+
+module_init(cmm_init);
+module_exit(cmm_exit);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 6f544ba4b37f..54816d75b578 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -75,9 +75,9 @@
  */
 
 /* If a device driver keeps reading an MMIO register in an interrupt
- * handler after a slot isolation event has occurred, we assume it
- * is broken and panic.  This sets the threshold for how many read
- * attempts we allow before panicking.
+ * handler after a slot isolation event, it might be broken.
+ * This sets the threshold for how many read attempts we allow
+ * before printing an error message.
  */
 #define EEH_MAX_FAILS	2100000
 
@@ -470,6 +470,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	unsigned long flags;
 	struct pci_dn *pdn;
 	int rc = 0;
+	const char *location;
 
 	total_mmio_ffs++;
 
@@ -509,18 +510,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	rc = 1;
 	if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
 		pdn->eeh_check_count ++;
-		if (pdn->eeh_check_count >= EEH_MAX_FAILS) {
-			printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
-			        pdn->eeh_check_count);
+		if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) {
+			location = of_get_property(dn, "ibm,loc-code", NULL);
+			printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
+				"location=%s driver=%s pci addr=%s\n",
+				pdn->eeh_check_count, location,
+				dev->driver->name, pci_name(dev));
+			printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+				dev->driver->name);
 			dump_stack();
-			msleep(5000);
-			
-			/* re-read the slot reset state */
-			if (read_slot_reset_state(pdn, rets) != 0)
-				rets[0] = -1;	/* reset state unknown */
-
-			/* If we are here, then we hit an infinite loop. Stop. */
-			panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev));
 		}
 		goto dn_unlock;
 	}
@@ -812,6 +810,7 @@ int rtas_set_slot_reset(struct pci_dn *pdn)
 static inline void __restore_bars (struct pci_dn *pdn)
 {
 	int i;
+	u32 cmd;
 
 	if (NULL==pdn->phb) return;
 	for (i=4; i<10; i++) {
@@ -832,6 +831,19 @@ static inline void __restore_bars (struct pci_dn *pdn)
 
 	/* max latency, min grant, interrupt pin and line */
 	rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
+
+	/* Restore PERR & SERR bits, some devices require it,
+	   don't touch the other command bits */
+	rtas_read_config(pdn, PCI_COMMAND, 4, &cmd);
+	if (pdn->config_space[1] & PCI_COMMAND_PARITY)
+		cmd |= PCI_COMMAND_PARITY;
+	else
+		cmd &= ~PCI_COMMAND_PARITY;
+	if (pdn->config_space[1] & PCI_COMMAND_SERR)
+		cmd |= PCI_COMMAND_SERR;
+	else
+		cmd &= ~PCI_COMMAND_SERR;
+	rtas_write_config(pdn, PCI_COMMAND, 4, cmd);
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 9d3a40f45974..5a707da3f5c2 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -26,6 +26,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 
+#include "pseries.h"
 
 typedef struct {
     unsigned long val;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 3c5727dd5aa5..a1a368dd2d99 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -15,34 +15,13 @@
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 
-static int pseries_remove_memory(struct device_node *np)
+static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 {
-	const char *type;
-	const unsigned int *my_index;
-	const unsigned int *regs;
-	u64 start_pfn, start;
+	unsigned long start, start_pfn;
 	struct zone *zone;
-	int ret = -EINVAL;
-
-	/*
-	 * Check to see if we are actually removing memory
-	 */
-	type = of_get_property(np, "device_type", NULL);
-	if (type == NULL || strcmp(type, "memory") != 0)
-		return 0;
+	int ret;
 
-	/*
-	 * Find the memory index and size of the removing section
-	 */
-	my_index = of_get_property(np, "ibm,my-drc-index", NULL);
-	if (!my_index)
-		return ret;
-
-	regs = of_get_property(np, "reg", NULL);
-	if (!regs)
-		return ret;
-
-	start_pfn = section_nr_to_pfn(*my_index & 0xffff);
+	start_pfn = base >> PFN_SECTION_SHIFT;
 	zone = page_zone(pfn_to_page(start_pfn));
 
 	/*
@@ -54,56 +33,111 @@ static int pseries_remove_memory(struct device_node *np)
 	 * to sysfs "state" file and we can't remove sysfs entries
 	 * while writing to it. So we have to defer it to here.
 	 */
-	ret = __remove_pages(zone, start_pfn, regs[3] >> PAGE_SHIFT);
+	ret = __remove_pages(zone, start_pfn, lmb_size >> PAGE_SHIFT);
 	if (ret)
 		return ret;
 
 	/*
 	 * Update memory regions for memory remove
 	 */
-	lmb_remove(start_pfn << PAGE_SHIFT, regs[3]);
+	lmb_remove(base, lmb_size);
 
 	/*
 	 * Remove htab bolted mappings for this section of memory
 	 */
-	start = (unsigned long)__va(start_pfn << PAGE_SHIFT);
-	ret = remove_section_mapping(start, start + regs[3]);
+	start = (unsigned long)__va(base);
+	ret = remove_section_mapping(start, start + lmb_size);
 	return ret;
 }
 
-static int pseries_add_memory(struct device_node *np)
+static int pseries_remove_memory(struct device_node *np)
 {
 	const char *type;
-	const unsigned int *my_index;
 	const unsigned int *regs;
-	u64 start_pfn;
+	unsigned long base;
+	unsigned int lmb_size;
 	int ret = -EINVAL;
 
 	/*
-	 * Check to see if we are actually adding memory
+	 * Check to see if we are actually removing memory
 	 */
 	type = of_get_property(np, "device_type", NULL);
 	if (type == NULL || strcmp(type, "memory") != 0)
 		return 0;
 
 	/*
-	 * Find the memory index and size of the added section
+	 * Find the bae address and size of the lmb
 	 */
-	my_index = of_get_property(np, "ibm,my-drc-index", NULL);
-	if (!my_index)
+	regs = of_get_property(np, "reg", NULL);
+	if (!regs)
 		return ret;
 
+	base = *(unsigned long *)regs;
+	lmb_size = regs[3];
+
+	ret = pseries_remove_lmb(base, lmb_size);
+	return ret;
+}
+
+static int pseries_add_memory(struct device_node *np)
+{
+	const char *type;
+	const unsigned int *regs;
+	unsigned long base;
+	unsigned int lmb_size;
+	int ret = -EINVAL;
+
+	/*
+	 * Check to see if we are actually adding memory
+	 */
+	type = of_get_property(np, "device_type", NULL);
+	if (type == NULL || strcmp(type, "memory") != 0)
+		return 0;
+
+	/*
+	 * Find the base and size of the lmb
+	 */
 	regs = of_get_property(np, "reg", NULL);
 	if (!regs)
 		return ret;
 
-	start_pfn = section_nr_to_pfn(*my_index & 0xffff);
+	base = *(unsigned long *)regs;
+	lmb_size = regs[3];
 
 	/*
 	 * Update memory region to represent the memory add
 	 */
-	lmb_add(start_pfn << PAGE_SHIFT, regs[3]);
-	return 0;
+	ret = lmb_add(base, lmb_size);
+	return (ret < 0) ? -EINVAL : 0;
+}
+
+static int pseries_drconf_memory(unsigned long *base, unsigned int action)
+{
+	struct device_node *np;
+	const unsigned long *lmb_size;
+	int rc;
+
+	np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+	if (!np)
+		return -EINVAL;
+
+	lmb_size = of_get_property(np, "ibm,lmb-size", NULL);
+	if (!lmb_size) {
+		of_node_put(np);
+		return -EINVAL;
+	}
+
+	if (action == PSERIES_DRCONF_MEM_ADD) {
+		rc = lmb_add(*base, *lmb_size);
+		rc = (rc < 0) ? -EINVAL : 0;
+	} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
+		rc = pseries_remove_lmb(*base, *lmb_size);
+	} else {
+		rc = -EINVAL;
+	}
+
+	of_node_put(np);
+	return rc;
 }
 
 static int pseries_memory_notifier(struct notifier_block *nb,
@@ -120,6 +154,11 @@ static int pseries_memory_notifier(struct notifier_block *nb,
 		if (pseries_remove_memory(node))
 			err = NOTIFY_BAD;
 		break;
+	case PSERIES_DRCONF_MEM_ADD:
+	case PSERIES_DRCONF_MEM_REMOVE:
+		if (pseries_drconf_memory(node, action))
+			err = NOTIFY_BAD;
+		break;
 	default:
 		err = NOTIFY_DONE;
 		break;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 176f1f39d2d5..a8c446697f9e 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -48,9 +48,10 @@
 #include "plpar_wrappers.h"
 
 
-static void tce_build_pSeries(struct iommu_table *tbl, long index,
+static int tce_build_pSeries(struct iommu_table *tbl, long index,
 			      long npages, unsigned long uaddr,
-			      enum dma_data_direction direction)
+			      enum dma_data_direction direction,
+			      struct dma_attrs *attrs)
 {
 	u64 proto_tce;
 	u64 *tcep;
@@ -71,6 +72,7 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index,
 		uaddr += TCE_PAGE_SIZE;
 		tcep++;
 	}
+	return 0;
 }
 
 
@@ -93,13 +95,19 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
 	return *tcep;
 }
 
-static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static void tce_free_pSeriesLP(struct iommu_table*, long, long);
+static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
+
+static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				long npages, unsigned long uaddr,
-				enum dma_data_direction direction)
+				enum dma_data_direction direction,
+				struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce, tce;
 	u64 rpn;
+	int ret = 0;
+	long tcenum_start = tcenum, npages_start = npages;
 
 	rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 	proto_tce = TCE_PCI_READ;
@@ -110,6 +118,13 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
 		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
 
+		if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+			ret = (int)rc;
+			tce_free_pSeriesLP(tbl, tcenum_start,
+			                   (npages_start - (npages + 1)));
+			break;
+		}
+
 		if (rc && printk_ratelimit()) {
 			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 			printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -121,23 +136,28 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum++;
 		rpn++;
 	}
+	return ret;
 }
 
 static DEFINE_PER_CPU(u64 *, tce_page) = NULL;
 
-static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				     long npages, unsigned long uaddr,
-				     enum dma_data_direction direction)
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce;
 	u64 *tcep;
 	u64 rpn;
 	long l, limit;
+	long tcenum_start = tcenum, npages_start = npages;
+	int ret = 0;
 
-	if (npages == 1)
+	if (npages == 1) {
 		return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
-					   direction);
+		                           direction, attrs);
+	}
 
 	tcep = __get_cpu_var(tce_page);
 
@@ -147,9 +167,10 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	if (!tcep) {
 		tcep = (u64 *)__get_free_page(GFP_ATOMIC);
 		/* If allocation fails, fall back to the loop implementation */
-		if (!tcep)
-			return tce_build_pSeriesLP(tbl, tcenum, npages,
-						   uaddr, direction);
+		if (!tcep) {
+			return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+					    direction, attrs);
+		}
 		__get_cpu_var(tce_page) = tcep;
 	}
 
@@ -180,6 +201,13 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum += limit;
 	} while (npages > 0 && !rc);
 
+	if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+		ret = (int)rc;
+		tce_freemulti_pSeriesLP(tbl, tcenum_start,
+		                        (npages_start - (npages + limit)));
+		return ret;
+	}
+
 	if (rc && printk_ratelimit()) {
 		printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -187,6 +215,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		printk("\ttce[0] val = 0x%lx\n", tcep[0]);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
+	return ret;
 }
 
 static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c
index e9dd5fe081c9..53cbd53d8740 100644
--- a/arch/powerpc/platforms/pseries/kexec.c
+++ b/arch/powerpc/platforms/pseries/kexec.c
@@ -70,4 +70,4 @@ static int __init pseries_kexec_setup(void)
 
 	return 0;
 }
-__initcall(pseries_kexec_setup);
+machine_device_initcall(pseries, pseries_kexec_setup);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 2cbaedb17f3e..52a80e5840e8 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -52,7 +52,7 @@ EXPORT_SYMBOL(plpar_hcall_norets);
 extern void pSeries_find_serial_port(void);
 
 
-int vtermno;	/* virtual terminal# for udbg  */
+static int vtermno;	/* virtual terminal# for udbg  */
 
 #define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
 static void udbg_hvsi_putc(char c)
@@ -305,7 +305,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	flags = 0;
 
 	/* Make pHyp happy */
-	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+	if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))
 		hpte_r &= ~_PAGE_COHERENT;
 
 	lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index d8680b589dc9..a437267c6bf8 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -42,6 +42,16 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa)
 	return vpa_call(0x3, cpu, vpa);
 }
 
+static inline long plpar_page_set_loaned(unsigned long vpa)
+{
+	return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa, 0);
+}
+
+static inline long plpar_page_set_active(unsigned long vpa)
+{
+	return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa, 0);
+}
+
 extern void vpa_init(int cpu);
 
 static inline long plpar_pte_enter(unsigned long flags,
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 2b548afd1003..d20b96e22c2e 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -55,7 +55,7 @@
 static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
 static DEFINE_SPINLOCK(ras_log_buf_lock);
 
-char mce_data_buf[RTAS_ERROR_LOG_MAX];
+static char mce_data_buf[RTAS_ERROR_LOG_MAX];
 
 static int ras_get_sensor_state_token;
 static int ras_check_exception_token;
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 75769aae41d5..7637bd38c795 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -365,7 +365,7 @@ static char *parse_node(char *buf, size_t bufsize, struct device_node **npp)
 	*buf = '\0';
 	buf++;
 
-	handle = simple_strtoul(handle_str, NULL, 10);
+	handle = simple_strtoul(handle_str, NULL, 0);
 
 	*npp = of_find_node_by_phandle(handle);
 	return buf;
@@ -422,8 +422,8 @@ static int do_update_property(char *buf, size_t bufsize)
 {
 	struct device_node *np;
 	unsigned char *value;
-	char *name, *end;
-	int length;
+	char *name, *end, *next_prop;
+	int rc, length;
 	struct property *newprop, *oldprop;
 	buf = parse_node(buf, bufsize, &np);
 	end = buf + bufsize;
@@ -431,7 +431,8 @@ static int do_update_property(char *buf, size_t bufsize)
 	if (!np)
 		return -ENODEV;
 
-	if (parse_next_property(buf, end, &name, &length, &value) == NULL)
+	next_prop = parse_next_property(buf, end, &name, &length, &value);
+	if (!next_prop)
 		return -EINVAL;
 
 	newprop = new_property(name, length, value, NULL);
@@ -442,7 +443,34 @@ static int do_update_property(char *buf, size_t bufsize)
 	if (!oldprop)
 		return -ENODEV;
 
-	return prom_update_property(np, newprop, oldprop);
+	rc = prom_update_property(np, newprop, oldprop);
+	if (rc)
+		return rc;
+
+	/* For memory under the ibm,dynamic-reconfiguration-memory node
+	 * of the device tree, adding and removing memory is just an update
+	 * to the ibm,dynamic-memory property instead of adding/removing a
+	 * memory node in the device tree.  For these cases we still need to
+	 * involve the notifier chain.
+	 */
+	if (!strcmp(name, "ibm,dynamic-memory")) {
+		int action;
+
+		next_prop = parse_next_property(next_prop, end, &name,
+						&length, &value);
+		if (!next_prop)
+			return -EINVAL;
+
+		if (!strcmp(name, "add"))
+			action = PSERIES_DRCONF_MEM_ADD;
+		else
+			action = PSERIES_DRCONF_MEM_REMOVE;
+
+		blocking_notifier_call_chain(&pSeries_reconfig_chain,
+					     action, value);
+	}
+
+	return 0;
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index 7d3e2b0bd4d2..c9ffd8c225f1 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -32,7 +32,7 @@
 
 static DEFINE_SPINLOCK(rtasd_log_lock);
 
-DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
+static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
 
 static char *rtas_log_buf;
 static unsigned long rtas_log_start;
@@ -329,7 +329,7 @@ static unsigned int rtas_log_poll(struct file *file, poll_table * wait)
 	return 0;
 }
 
-const struct file_operations proc_rtas_log_operations = {
+static const struct file_operations proc_rtas_log_operations = {
 	.read =		rtas_log_read,
 	.poll =		rtas_log_poll,
 	.open =		rtas_log_open,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index f5d29f5b13c1..063a0d2fba30 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -109,7 +109,7 @@ static void __init fwnmi_init(void)
 		fwnmi_active = 1;
 }
 
-void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
+static void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cascade_irq = i8259_irq();
 	if (cascade_irq != NO_IRQ)
@@ -314,6 +314,76 @@ static int pseries_set_xdabr(unsigned long dabr)
 			H_DABRX_KERNEL | H_DABRX_USER);
 }
 
+#define CMO_CHARACTERISTICS_TOKEN 44
+#define CMO_MAXLENGTH 1026
+
+/**
+ * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
+ * handle that here. (Stolen from parse_system_parameter_string)
+ */
+void pSeries_cmo_feature_init(void)
+{
+	char *ptr, *key, *value, *end;
+	int call_status;
+	int PrPSP = -1;
+	int SecPSP = -1;
+
+	pr_debug(" -> fw_cmo_feature_init()\n");
+	spin_lock(&rtas_data_buf_lock);
+	memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
+	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+				NULL,
+				CMO_CHARACTERISTICS_TOKEN,
+				__pa(rtas_data_buf),
+				RTAS_DATA_BUF_SIZE);
+
+	if (call_status != 0) {
+		spin_unlock(&rtas_data_buf_lock);
+		pr_debug("CMO not available\n");
+		pr_debug(" <- fw_cmo_feature_init()\n");
+		return;
+	}
+
+	end = rtas_data_buf + CMO_MAXLENGTH - 2;
+	ptr = rtas_data_buf + 2;	/* step over strlen value */
+	key = value = ptr;
+
+	while (*ptr && (ptr <= end)) {
+		/* Separate the key and value by replacing '=' with '\0' and
+		 * point the value at the string after the '='
+		 */
+		if (ptr[0] == '=') {
+			ptr[0] = '\0';
+			value = ptr + 1;
+		} else if (ptr[0] == '\0' || ptr[0] == ',') {
+			/* Terminate the string containing the key/value pair */
+			ptr[0] = '\0';
+
+			if (key == value) {
+				pr_debug("Malformed key/value pair\n");
+				/* Never found a '=', end processing */
+				break;
+			}
+
+			if (0 == strcmp(key, "PrPSP"))
+				PrPSP = simple_strtol(value, NULL, 10);
+			else if (0 == strcmp(key, "SecPSP"))
+				SecPSP = simple_strtol(value, NULL, 10);
+			value = key = ptr + 1;
+		}
+		ptr++;
+	}
+
+	if (PrPSP != -1 || SecPSP != -1) {
+		pr_info("CMO enabled\n");
+		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+		powerpc_firmware_features |= FW_FEATURE_CMO;
+	} else
+		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+	spin_unlock(&rtas_data_buf_lock);
+	pr_debug(" <- fw_cmo_feature_init()\n");
+}
+
 /*
  * Early initialization.  Relocation is on but do not reference unbolted pages
  */
@@ -329,6 +399,7 @@ static void __init pSeries_init_early(void)
 	else if (firmware_has_feature(FW_FEATURE_XDABR))
 		ppc_md.set_dabr = pseries_set_xdabr;
 
+	pSeries_cmo_feature_init();
 	iommu_init_early_pSeries();
 
 	pr_debug(" <- pSeries_init_early()\n");
@@ -482,7 +553,7 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
  * possible with power button press. If ibm,power-off-ups token is used
  * it will allow auto poweron after power is restored.
  */
-void pSeries_power_off(void)
+static void pSeries_power_off(void)
 {
 	int rc;
 	int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index ebebc28fe895..0fc830f576f5 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -383,13 +383,11 @@ static irqreturn_t xics_ipi_dispatch(int cpu)
 			mb();
 			smp_message_recv(PPC_MSG_RESCHEDULE);
 		}
-#if 0
-		if (test_and_clear_bit(PPC_MSG_MIGRATE_TASK,
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
 				       &xics_ipi_message[cpu].value)) {
 			mb();
-			smp_message_recv(PPC_MSG_MIGRATE_TASK);
+			smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
 		}
-#endif
 #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
 		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
 				       &xics_ipi_message[cpu].value)) {
diff --git a/arch/powerpc/sysdev/6xx-suspend.S b/arch/powerpc/sysdev/6xx-suspend.S
new file mode 100644
index 000000000000..21cda085d926
--- /dev/null
+++ b/arch/powerpc/sysdev/6xx-suspend.S
@@ -0,0 +1,52 @@
+/*
+ * Enter and leave sleep state on chips with 6xx-style HID0
+ * power management bits, which don't leave sleep state via reset.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+_GLOBAL(mpc6xx_enter_standby)
+	mflr	r4
+
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+	oris	r5, r5, HID0_SLEEP@h
+	mtspr	SPRN_HID0, r5
+	isync
+
+	lis	r5, ret_from_standby@h
+	ori	r5, r5, ret_from_standby@l
+	mtlr	r5
+
+	rlwinm	r5, r1, 0, 0, 31-THREAD_SHIFT
+	lwz	r6, TI_LOCAL_FLAGS(r5)
+	ori	r6, r6, _TLF_SLEEPING
+	stw	r6, TI_LOCAL_FLAGS(r5)
+
+	mfmsr	r5
+	ori	r5, r5, MSR_EE
+	oris	r5, r5, MSR_POW@h
+	sync
+	mtmsr	r5
+	isync
+
+1:	b	1b
+
+ret_from_standby:
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~HID0_SLEEP
+	mtspr	SPRN_HID0, r5
+
+	mtlr	r4
+	blr
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 6d386d0071a0..16a0ed28eb00 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -4,6 +4,7 @@ endif
 
 mpic-msi-obj-$(CONFIG_PCI_MSI)	+= mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
 obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y)
+fsl-msi-obj-$(CONFIG_PCI_MSI)	+= fsl_msi.o
 
 obj-$(CONFIG_PPC_MPC106)	+= grackle.o
 obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
@@ -11,8 +12,9 @@ obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
-obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
+obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
+obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
 obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
@@ -40,7 +42,12 @@ endif
 ifeq ($(ARCH),powerpc)
 obj-$(CONFIG_CPM)		+= cpm_common.o
 obj-$(CONFIG_CPM2)		+= cpm2.o cpm2_pic.o
+obj-$(CONFIG_QUICC_ENGINE)	+= cpm_common.o
 obj-$(CONFIG_PPC_DCR)		+= dcr.o
 obj-$(CONFIG_8xx)		+= mpc8xx_pic.o cpm1.o
 obj-$(CONFIG_UCODE_PATCH)	+= micropatch.o
 endif
+
+ifeq ($(CONFIG_SUSPEND),y)
+obj-$(CONFIG_6xx)		+= 6xx-suspend.o
+endif
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 7f59188cd9a1..9e105cbc5e5f 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -57,6 +57,8 @@
 #define AXON_RAM_SECTOR_SIZE		1 << AXON_RAM_SECTOR_SHIFT
 #define AXON_RAM_IRQ_FLAGS		IRQF_SHARED | IRQF_TRIGGER_RISING
 
+static int azfs_major, azfs_minor;
+
 struct axon_ram_bank {
 	struct of_device	*device;
 	struct gendisk		*disk;
@@ -148,7 +150,10 @@ axon_ram_direct_access(struct block_device *device, sector_t sector,
 	struct axon_ram_bank *bank = device->bd_disk->private_data;
 	loff_t offset;
 
-	offset = sector << AXON_RAM_SECTOR_SHIFT;
+	offset = sector;
+	if (device->bd_part != NULL)
+		offset += device->bd_part->start_sect;
+	offset <<= AXON_RAM_SECTOR_SHIFT;
 	if (offset >= bank->size) {
 		dev_err(&bank->device->dev, "Access outside of address space\n");
 		return -ERANGE;
@@ -227,19 +232,14 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 		goto failed;
 	}
 
-	bank->disk->first_minor = 0;
+	bank->disk->major = azfs_major;
+	bank->disk->first_minor = azfs_minor;
 	bank->disk->fops = &axon_ram_devops;
 	bank->disk->private_data = bank;
 	bank->disk->driverfs_dev = &device->dev;
 
 	sprintf(bank->disk->disk_name, "%s%d",
 			AXON_RAM_DEVICE_NAME, axon_ram_bank_id);
-	bank->disk->major = register_blkdev(0, bank->disk->disk_name);
-	if (bank->disk->major < 0) {
-		dev_err(&device->dev, "Cannot register block device\n");
-		rc = -EFAULT;
-		goto failed;
-	}
 
 	bank->disk->queue = blk_alloc_queue(GFP_KERNEL);
 	if (bank->disk->queue == NULL) {
@@ -276,6 +276,8 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 		goto failed;
 	}
 
+	azfs_minor += bank->disk->minors;
+
 	return 0;
 
 failed:
@@ -310,7 +312,6 @@ axon_ram_remove(struct of_device *device)
 
 	device_remove_file(&device->dev, &dev_attr_ecc);
 	free_irq(bank->irq_id, device);
-	unregister_blkdev(bank->disk->major, bank->disk->disk_name);
 	del_gendisk(bank->disk);
 	iounmap((void __iomem *) bank->io_addr);
 	kfree(bank);
@@ -341,6 +342,14 @@ static struct of_platform_driver axon_ram_driver = {
 static int __init
 axon_ram_init(void)
 {
+	azfs_major = register_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
+	if (azfs_major < 0) {
+		printk(KERN_ERR "%s cannot become block device major number\n",
+				AXON_RAM_MODULE_NAME);
+		return -EFAULT;
+	}
+	azfs_minor = 0;
+
 	return of_register_platform_driver(&axon_ram_driver);
 }
 
@@ -351,6 +360,7 @@ static void __exit
 axon_ram_exit(void)
 {
 	of_unregister_platform_driver(&axon_ram_driver);
+	unregister_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
 }
 
 module_init(axon_ram_init);
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index 64ec7d629363..446c9ea85b30 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -443,7 +443,7 @@ mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match)
 
 	/* Done ! */
 	printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
-		bcom_eng->regs_base);
+		(long)bcom_eng->regs_base);
 
 	return 0;
 
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c
index 8d33eafbb3f4..a3a134c35b0a 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.c
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c
@@ -20,6 +20,7 @@
 #include <asm/io.h>
 
 #include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
 
 #include "bestcomm.h"
 #include "bestcomm_priv.h"
@@ -253,6 +254,100 @@ bcom_gen_bd_tx_release(struct bcom_task *tsk)
 }
 EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release);
 
+/* ---------------------------------------------------------------------
+ * PSC support code
+ */
+
+/**
+ * bcom_psc_parameters - Bestcomm initialization value table for PSC devices
+ *
+ * This structure is only used internally.  It is a lookup table for PSC
+ * specific parameters to bestcomm tasks.
+ */
+static struct bcom_psc_params {
+	int rx_initiator;
+	int rx_ipr;
+	int tx_initiator;
+	int tx_ipr;
+} bcom_psc_params[] = {
+	[0] = {
+		.rx_initiator = BCOM_INITIATOR_PSC1_RX,
+		.rx_ipr = BCOM_IPR_PSC1_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC1_TX,
+		.tx_ipr = BCOM_IPR_PSC1_TX,
+	},
+	[1] = {
+		.rx_initiator = BCOM_INITIATOR_PSC2_RX,
+		.rx_ipr = BCOM_IPR_PSC2_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC2_TX,
+		.tx_ipr = BCOM_IPR_PSC2_TX,
+	},
+	[2] = {
+		.rx_initiator = BCOM_INITIATOR_PSC3_RX,
+		.rx_ipr = BCOM_IPR_PSC3_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC3_TX,
+		.tx_ipr = BCOM_IPR_PSC3_TX,
+	},
+	[3] = {
+		.rx_initiator = BCOM_INITIATOR_PSC4_RX,
+		.rx_ipr = BCOM_IPR_PSC4_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC4_TX,
+		.tx_ipr = BCOM_IPR_PSC4_TX,
+	},
+	[4] = {
+		.rx_initiator = BCOM_INITIATOR_PSC5_RX,
+		.rx_ipr = BCOM_IPR_PSC5_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC5_TX,
+		.tx_ipr = BCOM_IPR_PSC5_TX,
+	},
+	[5] = {
+		.rx_initiator = BCOM_INITIATOR_PSC6_RX,
+		.rx_ipr = BCOM_IPR_PSC6_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC6_TX,
+		.tx_ipr = BCOM_IPR_PSC6_TX,
+	},
+};
+
+/**
+ * bcom_psc_gen_bd_rx_init - Allocate a receive bcom_task for a PSC port
+ * @psc_num:	Number of the PSC to allocate a task for
+ * @queue_len:	number of buffer descriptors to allocate for the task
+ * @fifo:	physical address of FIFO register
+ * @maxbufsize:	Maximum receive data size in bytes.
+ *
+ * Allocate a bestcomm task structure for receiving data from a PSC.
+ */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+					   phys_addr_t fifo, int maxbufsize)
+{
+	if (psc_num >= MPC52xx_PSC_MAXNUM)
+		return NULL;
+
+	return bcom_gen_bd_rx_init(queue_len, fifo,
+				   bcom_psc_params[psc_num].rx_initiator,
+				   bcom_psc_params[psc_num].rx_ipr,
+				   maxbufsize);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_rx_init);
+
+/**
+ * bcom_psc_gen_bd_tx_init - Allocate a transmit bcom_task for a PSC port
+ * @psc_num:	Number of the PSC to allocate a task for
+ * @queue_len:	number of buffer descriptors to allocate for the task
+ * @fifo:	physical address of FIFO register
+ *
+ * Allocate a bestcomm task structure for transmitting data to a PSC.
+ */
+struct bcom_task *
+bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, phys_addr_t fifo)
+{
+	struct psc;
+	return bcom_gen_bd_tx_init(queue_len, fifo,
+				   bcom_psc_params[psc_num].tx_initiator,
+				   bcom_psc_params[psc_num].tx_ipr);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_tx_init);
+
 
 MODULE_DESCRIPTION("BestComm General Buffer Descriptor tasks driver");
 MODULE_AUTHOR("Jeff Gibbons <jeff.gibbons@appspec.com>");
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.h b/arch/powerpc/sysdev/bestcomm/gen_bd.h
index 5b6fa803c6aa..de47260e69da 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.h
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.h
@@ -44,5 +44,10 @@ extern void
 bcom_gen_bd_tx_release(struct bcom_task *tsk);
 
 
+/* PSC support utility wrappers */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+					   phys_addr_t fifo, int maxbufsize);
+struct bcom_task * bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len,
+					   phys_addr_t fifo);
 #endif  /* __BESTCOMM_GEN_BD_H__ */
 
diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/arch/powerpc/sysdev/bestcomm/sram.c
index 99784383a843..5d74ef7a651f 100644
--- a/arch/powerpc/sysdev/bestcomm/sram.c
+++ b/arch/powerpc/sysdev/bestcomm/sram.c
@@ -86,7 +86,7 @@ int bcom_sram_init(struct device_node *sram_node, char *owner)
 	if (!bcom_sram->base_virt) {
 		printk(KERN_ERR "%s: bcom_sram_init: "
 			"Map error SRAM zone 0x%08lx (0x%0x)!\n",
-			owner, bcom_sram->base_phys, bcom_sram->size );
+			owner, (long)bcom_sram->base_phys, bcom_sram->size );
 		rv = -ENOMEM;
 		goto error_release;
 	}
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 58292a086c16..661df42830b9 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -159,7 +159,7 @@ unsigned int cpm_pic_init(void)
 
 	out_be32(&cpic_reg->cpic_cimr, 0);
 
-	cpm_pic_host = irq_alloc_host(of_node_get(np), IRQ_HOST_MAP_LINEAR,
+	cpm_pic_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
 				      64, &cpm_pic_host_ops, 64);
 	if (cpm_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 5fe65b2f8f3a..b16ca3ed65d2 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -266,7 +266,7 @@ void cpm2_pic_init(struct device_node *node)
 	out_be32(&cpm2_intctl->ic_scprrl, 0x05309770);
 
 	/* create a legacy host */
-	cpm2_pic_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	cpm2_pic_host = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       64, &cpm2_pic_host_ops, 64);
 	if (cpm2_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index cb7df2dce44f..e4b7296acb2c 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -37,7 +37,7 @@ static void udbg_putc_cpm(char c)
 	u8 __iomem *txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
 
 	if (c == '\n')
-		udbg_putc('\r');
+		udbg_putc_cpm('\r');
 
 	while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000)
 		;
@@ -53,7 +53,6 @@ void __init udbg_init_cpm(void)
 		setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO);
 #endif
 		udbg_putc = udbg_putc_cpm;
-		udbg_putc('X');
 	}
 }
 #endif
@@ -85,9 +84,13 @@ int __init cpm_muram_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
 	if (!np) {
-		printk(KERN_ERR "Cannot find CPM muram data node");
-		ret = -ENODEV;
-		goto out;
+		/* try legacy bindings */
+		np = of_find_node_by_name(NULL, "data-only");
+		if (!np) {
+			printk(KERN_ERR "Cannot find CPM muram data node");
+			ret = -ENODEV;
+			goto out;
+		}
 	}
 
 	muram_pbase = of_translate_address(np, zero);
@@ -189,6 +192,12 @@ void __iomem *cpm_muram_addr(unsigned long offset)
 }
 EXPORT_SYMBOL(cpm_muram_addr);
 
+unsigned long cpm_muram_offset(void __iomem *addr)
+{
+	return addr - (void __iomem *)muram_vbase;
+}
+EXPORT_SYMBOL(cpm_muram_offset);
+
 /**
  * cpm_muram_dma - turn a muram virtual address into a DMA address
  * @offset: virtual address from cpm_muram_addr() to convert
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 005c2ecf976f..89639ecbf381 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -147,9 +147,10 @@ static void dart_flush(struct iommu_table *tbl)
 	}
 }
 
-static void dart_build(struct iommu_table *tbl, long index,
+static int dart_build(struct iommu_table *tbl, long index,
 		       long npages, unsigned long uaddr,
-		       enum dma_data_direction direction)
+		       enum dma_data_direction direction,
+		       struct dma_attrs *attrs)
 {
 	unsigned int *dp;
 	unsigned int rpn;
@@ -183,6 +184,7 @@ static void dart_build(struct iommu_table *tbl, long index,
 	} else {
 		dart_dirty = 1;
 	}
+	return 0;
 }
 
 
diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c
index 437e48d3ae33..a8ba9983dd5a 100644
--- a/arch/powerpc/sysdev/dcr.c
+++ b/arch/powerpc/sysdev/dcr.c
@@ -23,6 +23,107 @@
 #include <asm/prom.h>
 #include <asm/dcr.h>
 
+#ifdef CONFIG_PPC_DCR_MMIO
+static struct device_node *find_dcr_parent(struct device_node *node)
+{
+	struct device_node *par, *tmp;
+	const u32 *p;
+
+	for (par = of_node_get(node); par;) {
+		if (of_get_property(par, "dcr-controller", NULL))
+			break;
+		p = of_get_property(par, "dcr-parent", NULL);
+		tmp = par;
+		if (p == NULL)
+			par = of_get_parent(par);
+		else
+			par = of_find_node_by_phandle(*p);
+		of_node_put(tmp);
+	}
+	return par;
+}
+#endif
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+bool dcr_map_ok_generic(dcr_host_t host)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		return dcr_map_ok_native(host.host.native);
+	else if (host.type == DCR_HOST_MMIO)
+		return dcr_map_ok_mmio(host.host.mmio);
+	else
+		return 0;
+}
+EXPORT_SYMBOL_GPL(dcr_map_ok_generic);
+
+dcr_host_t dcr_map_generic(struct device_node *dev,
+			   unsigned int dcr_n,
+			   unsigned int dcr_c)
+{
+	dcr_host_t host;
+	struct device_node *dp;
+	const char *prop;
+
+	host.type = DCR_HOST_INVALID;
+
+	dp = find_dcr_parent(dev);
+	if (dp == NULL)
+		return host;
+
+	prop = of_get_property(dp, "dcr-access-method", NULL);
+
+	pr_debug("dcr_map_generic(dcr-access-method = %s)\n", prop);
+
+	if (!strcmp(prop, "native")) {
+		host.type = DCR_HOST_NATIVE;
+		host.host.native = dcr_map_native(dev, dcr_n, dcr_c);
+	} else if (!strcmp(prop, "mmio")) {
+		host.type = DCR_HOST_MMIO;
+		host.host.mmio = dcr_map_mmio(dev, dcr_n, dcr_c);
+	}
+
+	of_node_put(dp);
+	return host;
+}
+EXPORT_SYMBOL_GPL(dcr_map_generic);
+
+void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		dcr_unmap_native(host.host.native, dcr_c);
+	else if (host.type == DCR_HOST_MMIO)
+		dcr_unmap_mmio(host.host.mmio, dcr_c);
+	else /* host.type == DCR_HOST_INVALID */
+		WARN_ON(true);
+}
+EXPORT_SYMBOL_GPL(dcr_unmap_generic);
+
+u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		return dcr_read_native(host.host.native, dcr_n);
+	else if (host.type == DCR_HOST_MMIO)
+		return dcr_read_mmio(host.host.mmio, dcr_n);
+	else /* host.type == DCR_HOST_INVALID */
+		WARN_ON(true);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dcr_read_generic);
+
+void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		dcr_write_native(host.host.native, dcr_n, value);
+	else if (host.type == DCR_HOST_MMIO)
+		dcr_write_mmio(host.host.mmio, dcr_n, value);
+	else /* host.type == DCR_HOST_INVALID */
+		WARN_ON(true);
+}
+EXPORT_SYMBOL_GPL(dcr_write_generic);
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
 unsigned int dcr_resource_start(struct device_node *np, unsigned int index)
 {
 	unsigned int ds;
@@ -47,26 +148,7 @@ unsigned int dcr_resource_len(struct device_node *np, unsigned int index)
 }
 EXPORT_SYMBOL_GPL(dcr_resource_len);
 
-#ifndef CONFIG_PPC_DCR_NATIVE
-
-static struct device_node * find_dcr_parent(struct device_node * node)
-{
-	struct device_node *par, *tmp;
-	const u32 *p;
-
-	for (par = of_node_get(node); par;) {
-		if (of_get_property(par, "dcr-controller", NULL))
-			break;
-		p = of_get_property(par, "dcr-parent", NULL);
-		tmp = par;
-		if (p == NULL)
-			par = of_get_parent(par);
-		else
-			par = of_find_node_by_phandle(*p);
-		of_node_put(tmp);
-	}
-	return par;
-}
+#ifdef CONFIG_PPC_DCR_MMIO
 
 u64 of_translate_dcr_address(struct device_node *dev,
 			     unsigned int dcr_n,
@@ -75,7 +157,7 @@ u64 of_translate_dcr_address(struct device_node *dev,
 	struct device_node *dp;
 	const u32 *p;
 	unsigned int stride;
-	u64 ret;
+	u64 ret = OF_BAD_ADDR;
 
 	dp = find_dcr_parent(dev);
 	if (dp == NULL)
@@ -90,7 +172,7 @@ u64 of_translate_dcr_address(struct device_node *dev,
 	if (p == NULL)
 		p = of_get_property(dp, "dcr-mmio-space", NULL);
 	if (p == NULL)
-		return OF_BAD_ADDR;
+		goto done;
 
 	/* Maybe could do some better range checking here */
 	ret = of_translate_address(dp, p);
@@ -98,21 +180,25 @@ u64 of_translate_dcr_address(struct device_node *dev,
 		ret += (u64)(stride) * (u64)dcr_n;
 	if (out_stride)
 		*out_stride = stride;
+
+ done:
+	of_node_put(dp);
 	return ret;
 }
 
-dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
-		   unsigned int dcr_c)
+dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
+			     unsigned int dcr_n,
+			     unsigned int dcr_c)
 {
-	dcr_host_t ret = { .token = NULL, .stride = 0, .base = dcr_n };
+	dcr_host_mmio_t ret = { .token = NULL, .stride = 0, .base = dcr_n };
 	u64 addr;
 
 	pr_debug("dcr_map(%s, 0x%x, 0x%x)\n",
 		 dev->full_name, dcr_n, dcr_c);
 
 	addr = of_translate_dcr_address(dev, dcr_n, &ret.stride);
-	pr_debug("translates to addr: 0x%lx, stride: 0x%x\n",
-		 addr, ret.stride);
+	pr_debug("translates to addr: 0x%llx, stride: 0x%x\n",
+		 (unsigned long long) addr, ret.stride);
 	if (addr == OF_BAD_ADDR)
 		return ret;
 	pr_debug("mapping 0x%x bytes\n", dcr_c * ret.stride);
@@ -124,11 +210,11 @@ dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
 	ret.token -= dcr_n * ret.stride;
 	return ret;
 }
-EXPORT_SYMBOL_GPL(dcr_map);
+EXPORT_SYMBOL_GPL(dcr_map_mmio);
 
-void dcr_unmap(dcr_host_t host, unsigned int dcr_c)
+void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c)
 {
-	dcr_host_t h = host;
+	dcr_host_mmio_t h = host;
 
 	if (h.token == NULL)
 		return;
@@ -136,7 +222,11 @@ void dcr_unmap(dcr_host_t host, unsigned int dcr_c)
 	iounmap(h.token);
 	h.token = NULL;
 }
-EXPORT_SYMBOL_GPL(dcr_unmap);
-#else	/* defined(CONFIG_PPC_DCR_NATIVE) */
+EXPORT_SYMBOL_GPL(dcr_unmap_mmio);
+
+#endif /* defined(CONFIG_PPC_DCR_MMIO) */
+
+#ifdef CONFIG_PPC_DCR_NATIVE
 DEFINE_SPINLOCK(dcr_ind_lock);
-#endif	/* !defined(CONFIG_PPC_DCR_NATIVE) */
+#endif	/* defined(CONFIG_PPC_DCR_NATIVE) */
+
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
new file mode 100644
index 000000000000..714ec02fed2e
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -0,0 +1,434 @@
+/*
+ * Freescale General-purpose Timers Module
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <asm/fsl_gtm.h>
+
+#define GTCFR_STP(x)		((x) & 1 ? 1 << 5 : 1 << 1)
+#define GTCFR_RST(x)		((x) & 1 ? 1 << 4 : 1 << 0)
+
+#define GTMDR_ICLK_MASK		(3 << 1)
+#define GTMDR_ICLK_ICAS		(0 << 1)
+#define GTMDR_ICLK_ICLK		(1 << 1)
+#define GTMDR_ICLK_SLGO		(2 << 1)
+#define GTMDR_FRR		(1 << 3)
+#define GTMDR_ORI		(1 << 4)
+#define GTMDR_SPS(x)		((x) << 8)
+
+struct gtm_timers_regs {
+	u8	gtcfr1;		/* Timer 1, Timer 2 global config register */
+	u8	res0[0x3];
+	u8	gtcfr2;		/* Timer 3, timer 4 global config register */
+	u8	res1[0xB];
+	__be16	gtmdr1;		/* Timer 1 mode register */
+	__be16	gtmdr2;		/* Timer 2 mode register */
+	__be16	gtrfr1;		/* Timer 1 reference register */
+	__be16	gtrfr2;		/* Timer 2 reference register */
+	__be16	gtcpr1;		/* Timer 1 capture register */
+	__be16	gtcpr2;		/* Timer 2 capture register */
+	__be16	gtcnr1;		/* Timer 1 counter */
+	__be16	gtcnr2;		/* Timer 2 counter */
+	__be16	gtmdr3;		/* Timer 3 mode register */
+	__be16	gtmdr4;		/* Timer 4 mode register */
+	__be16	gtrfr3;		/* Timer 3 reference register */
+	__be16	gtrfr4;		/* Timer 4 reference register */
+	__be16	gtcpr3;		/* Timer 3 capture register */
+	__be16	gtcpr4;		/* Timer 4 capture register */
+	__be16	gtcnr3;		/* Timer 3 counter */
+	__be16	gtcnr4;		/* Timer 4 counter */
+	__be16	gtevr1;		/* Timer 1 event register */
+	__be16	gtevr2;		/* Timer 2 event register */
+	__be16	gtevr3;		/* Timer 3 event register */
+	__be16	gtevr4;		/* Timer 4 event register */
+	__be16	gtpsr1;		/* Timer 1 prescale register */
+	__be16	gtpsr2;		/* Timer 2 prescale register */
+	__be16	gtpsr3;		/* Timer 3 prescale register */
+	__be16	gtpsr4;		/* Timer 4 prescale register */
+	u8 res2[0x40];
+} __attribute__ ((packed));
+
+struct gtm {
+	unsigned int clock;
+	struct gtm_timers_regs __iomem *regs;
+	struct gtm_timer timers[4];
+	spinlock_t lock;
+	struct list_head list_node;
+};
+
+static LIST_HEAD(gtms);
+
+/**
+ * gtm_get_timer - request GTM timer to use it with the rest of GTM API
+ * Context:	non-IRQ
+ *
+ * This function reserves GTM timer for later use. It returns gtm_timer
+ * structure to use with the rest of GTM API, you should use timer->irq
+ * to manage timer interrupt.
+ */
+struct gtm_timer *gtm_get_timer16(void)
+{
+	struct gtm *gtm = NULL;
+	int i;
+
+	list_for_each_entry(gtm, &gtms, list_node) {
+		spin_lock_irq(&gtm->lock);
+
+		for (i = 0; i < ARRAY_SIZE(gtm->timers); i++) {
+			if (!gtm->timers[i].requested) {
+				gtm->timers[i].requested = true;
+				spin_unlock_irq(&gtm->lock);
+				return &gtm->timers[i];
+			}
+		}
+
+		spin_unlock_irq(&gtm->lock);
+	}
+
+	if (gtm)
+		return ERR_PTR(-EBUSY);
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL(gtm_get_timer16);
+
+/**
+ * gtm_get_specific_timer - request specific GTM timer
+ * @gtm:	specific GTM, pass here GTM's device_node->data
+ * @timer:	specific timer number, Timer1 is 0.
+ * Context:	non-IRQ
+ *
+ * This function reserves GTM timer for later use. It returns gtm_timer
+ * structure to use with the rest of GTM API, you should use timer->irq
+ * to manage timer interrupt.
+ */
+struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm,
+					   unsigned int timer)
+{
+	struct gtm_timer *ret = ERR_PTR(-EBUSY);
+
+	if (timer > 3)
+		return ERR_PTR(-EINVAL);
+
+	spin_lock_irq(&gtm->lock);
+
+	if (gtm->timers[timer].requested)
+		goto out;
+
+	ret = &gtm->timers[timer];
+	ret->requested = true;
+
+out:
+	spin_unlock_irq(&gtm->lock);
+	return ret;
+}
+EXPORT_SYMBOL(gtm_get_specific_timer16);
+
+/**
+ * gtm_put_timer16 - release 16 bits GTM timer
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * Context:	any
+ *
+ * This function releases GTM timer so others may request it.
+ */
+void gtm_put_timer16(struct gtm_timer *tmr)
+{
+	gtm_stop_timer16(tmr);
+
+	spin_lock_irq(&tmr->gtm->lock);
+	tmr->requested = false;
+	spin_unlock_irq(&tmr->gtm->lock);
+}
+EXPORT_SYMBOL(gtm_put_timer16);
+
+/*
+ * This is back-end for the exported functions, it's used to reset single
+ * timer in reference mode.
+ */
+static int gtm_set_ref_timer16(struct gtm_timer *tmr, int frequency,
+			       int reference_value, bool free_run)
+{
+	struct gtm *gtm = tmr->gtm;
+	int num = tmr - &gtm->timers[0];
+	unsigned int prescaler;
+	u8 iclk = GTMDR_ICLK_ICLK;
+	u8 psr;
+	u8 sps;
+	unsigned long flags;
+	int max_prescaler = 256 * 256 * 16;
+
+	/* CPM2 doesn't have primary prescaler */
+	if (!tmr->gtpsr)
+		max_prescaler /= 256;
+
+	prescaler = gtm->clock / frequency;
+	/*
+	 * We have two 8 bit prescalers -- primary and secondary (psr, sps),
+	 * plus "slow go" mode (clk / 16). So, total prescale value is
+	 * 16 * (psr + 1) * (sps + 1). Though, for CPM2 GTMs we losing psr.
+	 */
+	if (prescaler > max_prescaler)
+		return -EINVAL;
+
+	if (prescaler > max_prescaler / 16) {
+		iclk = GTMDR_ICLK_SLGO;
+		prescaler /= 16;
+	}
+
+	if (prescaler <= 256) {
+		psr = 0;
+		sps = prescaler - 1;
+	} else {
+		psr = 256 - 1;
+		sps = prescaler / 256 - 1;
+	}
+
+	spin_lock_irqsave(&gtm->lock, flags);
+
+	/*
+	 * Properly reset timers: stop, reset, set up prescalers, reference
+	 * value and clear event register.
+	 */
+	clrsetbits_8(tmr->gtcfr, ~(GTCFR_STP(num) | GTCFR_RST(num)),
+				 GTCFR_STP(num) | GTCFR_RST(num));
+
+	setbits8(tmr->gtcfr, GTCFR_STP(num));
+
+	if (tmr->gtpsr)
+		out_be16(tmr->gtpsr, psr);
+	clrsetbits_be16(tmr->gtmdr, 0xFFFF, iclk | GTMDR_SPS(sps) |
+			GTMDR_ORI | (free_run ? GTMDR_FRR : 0));
+	out_be16(tmr->gtcnr, 0);
+	out_be16(tmr->gtrfr, reference_value);
+	out_be16(tmr->gtevr, 0xFFFF);
+
+	/* Let it be. */
+	clrbits8(tmr->gtcfr, GTCFR_STP(num));
+
+	spin_unlock_irqrestore(&gtm->lock, flags);
+
+	return 0;
+}
+
+/**
+ * gtm_set_timer16 - (re)set 16 bit timer with arbitrary precision
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * @usec:	timer interval in microseconds
+ * @reload:	if set, the timer will reset upon expiry rather than
+ *         	continue running free.
+ * Context:	any
+ *
+ * This function (re)sets the GTM timer so that it counts up to the requested
+ * interval value, and fires the interrupt when the value is reached. This
+ * function will reduce the precision of the timer as needed in order for the
+ * requested timeout to fit in a 16-bit register.
+ */
+int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec, bool reload)
+{
+	/* quite obvious, frequency which is enough for µSec precision */
+	int freq = 1000000;
+	unsigned int bit;
+
+	bit = fls_long(usec);
+	if (bit > 15) {
+		freq >>= bit - 15;
+		usec >>= bit - 15;
+	}
+
+	if (!freq)
+		return -EINVAL;
+
+	return gtm_set_ref_timer16(tmr, freq, usec, reload);
+}
+EXPORT_SYMBOL(gtm_set_timer16);
+
+/**
+ * gtm_set_exact_utimer16 - (re)set 16 bits timer
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * @usec:	timer interval in microseconds
+ * @reload:	if set, the timer will reset upon expiry rather than
+ *         	continue running free.
+ * Context:	any
+ *
+ * This function (re)sets GTM timer so that it counts up to the requested
+ * interval value, and fires the interrupt when the value is reached. If reload
+ * flag was set, timer will also reset itself upon reference value, otherwise
+ * it continues to increment.
+ *
+ * The _exact_ bit in the function name states that this function will not
+ * crop precision of the "usec" argument, thus usec is limited to 16 bits
+ * (single timer width).
+ */
+int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec, bool reload)
+{
+	/* quite obvious, frequency which is enough for µSec precision */
+	const int freq = 1000000;
+
+	/*
+	 * We can lower the frequency (and probably power consumption) by
+	 * dividing both frequency and usec by 2 until there is no remainder.
+	 * But we won't bother with this unless savings are measured, so just
+	 * run the timer as is.
+	 */
+
+	return gtm_set_ref_timer16(tmr, freq, usec, reload);
+}
+EXPORT_SYMBOL(gtm_set_exact_timer16);
+
+/**
+ * gtm_stop_timer16 - stop single timer
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * Context:	any
+ *
+ * This function simply stops the GTM timer.
+ */
+void gtm_stop_timer16(struct gtm_timer *tmr)
+{
+	struct gtm *gtm = tmr->gtm;
+	int num = tmr - &gtm->timers[0];
+	unsigned long flags;
+
+	spin_lock_irqsave(&gtm->lock, flags);
+
+	setbits8(tmr->gtcfr, GTCFR_STP(num));
+	out_be16(tmr->gtevr, 0xFFFF);
+
+	spin_unlock_irqrestore(&gtm->lock, flags);
+}
+EXPORT_SYMBOL(gtm_stop_timer16);
+
+/**
+ * gtm_ack_timer16 - acknowledge timer event (free-run timers only)
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * @events:	events mask to ack
+ * Context:	any
+ *
+ * Thus function used to acknowledge timer interrupt event, use it inside the
+ * interrupt handler.
+ */
+void gtm_ack_timer16(struct gtm_timer *tmr, u16 events)
+{
+	out_be16(tmr->gtevr, events);
+}
+EXPORT_SYMBOL(gtm_ack_timer16);
+
+static void __init gtm_set_shortcuts(struct device_node *np,
+				     struct gtm_timer *timers,
+				     struct gtm_timers_regs __iomem *regs)
+{
+	/*
+	 * Yeah, I don't like this either, but timers' registers a bit messed,
+	 * so we have to provide shortcuts to write timer independent code.
+	 * Alternative option is to create gt*() accessors, but that will be
+	 * even uglier and cryptic.
+	 */
+	timers[0].gtcfr = &regs->gtcfr1;
+	timers[0].gtmdr = &regs->gtmdr1;
+	timers[0].gtcnr = &regs->gtcnr1;
+	timers[0].gtrfr = &regs->gtrfr1;
+	timers[0].gtevr = &regs->gtevr1;
+
+	timers[1].gtcfr = &regs->gtcfr1;
+	timers[1].gtmdr = &regs->gtmdr2;
+	timers[1].gtcnr = &regs->gtcnr2;
+	timers[1].gtrfr = &regs->gtrfr2;
+	timers[1].gtevr = &regs->gtevr2;
+
+	timers[2].gtcfr = &regs->gtcfr2;
+	timers[2].gtmdr = &regs->gtmdr3;
+	timers[2].gtcnr = &regs->gtcnr3;
+	timers[2].gtrfr = &regs->gtrfr3;
+	timers[2].gtevr = &regs->gtevr3;
+
+	timers[3].gtcfr = &regs->gtcfr2;
+	timers[3].gtmdr = &regs->gtmdr4;
+	timers[3].gtcnr = &regs->gtcnr4;
+	timers[3].gtrfr = &regs->gtrfr4;
+	timers[3].gtevr = &regs->gtevr4;
+
+	/* CPM2 doesn't have primary prescaler */
+	if (!of_device_is_compatible(np, "fsl,cpm2-gtm")) {
+		timers[0].gtpsr = &regs->gtpsr1;
+		timers[1].gtpsr = &regs->gtpsr2;
+		timers[2].gtpsr = &regs->gtpsr3;
+		timers[3].gtpsr = &regs->gtpsr4;
+	}
+}
+
+static int __init fsl_gtm_init(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,gtm") {
+		int i;
+		struct gtm *gtm;
+		const u32 *clock;
+		int size;
+
+		gtm = kzalloc(sizeof(*gtm), GFP_KERNEL);
+		if (!gtm) {
+			pr_err("%s: unable to allocate memory\n",
+				np->full_name);
+			continue;
+		}
+
+		spin_lock_init(&gtm->lock);
+
+		clock = of_get_property(np, "clock-frequency", &size);
+		if (!clock || size != sizeof(*clock)) {
+			pr_err("%s: no clock-frequency\n", np->full_name);
+			goto err;
+		}
+		gtm->clock = *clock;
+
+		for (i = 0; i < ARRAY_SIZE(gtm->timers); i++) {
+			int ret;
+			struct resource irq;
+
+			ret = of_irq_to_resource(np, i, &irq);
+			if (ret == NO_IRQ) {
+				pr_err("%s: not enough interrupts specified\n",
+				       np->full_name);
+				goto err;
+			}
+			gtm->timers[i].irq = irq.start;
+			gtm->timers[i].gtm = gtm;
+		}
+
+		gtm->regs = of_iomap(np, 0);
+		if (!gtm->regs) {
+			pr_err("%s: unable to iomap registers\n",
+			       np->full_name);
+			goto err;
+		}
+
+		gtm_set_shortcuts(np, gtm->timers, gtm->regs);
+		list_add(&gtm->list_node, &gtms);
+
+		/* We don't want to lose the node and its ->data */
+		np->data = gtm;
+		of_node_get(np);
+
+		continue;
+err:
+		kfree(gtm);
+	}
+	return 0;
+}
+arch_initcall(fsl_gtm_init);
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
new file mode 100644
index 000000000000..2c5187cc8a24
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Tony Li <tony.li@freescale.com>
+ *	   Jason Jin <Jason.jin@freescale.com>
+ *
+ * The hwirq alloc and free code reuse from sysdev/mpic_msi.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/bitmap.h>
+#include <linux/msi.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include "fsl_msi.h"
+
+struct fsl_msi_feature {
+	u32 fsl_pic_ip;
+	u32 msiir_offset;
+};
+
+static struct fsl_msi *fsl_msi;
+
+static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg)
+{
+	return in_be32(base + (reg >> 2));
+}
+
+/*
+ * We do not need this actually. The MSIR register has been read once
+ * in the cascade interrupt. So, this MSI interrupt has been acked
+*/
+static void fsl_msi_end_irq(unsigned int virq)
+{
+}
+
+static struct irq_chip fsl_msi_chip = {
+	.mask		= mask_msi_irq,
+	.unmask		= unmask_msi_irq,
+	.ack		= fsl_msi_end_irq,
+	.typename	= " FSL-MSI  ",
+};
+
+static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
+				irq_hw_number_t hw)
+{
+	struct irq_chip *chip = &fsl_msi_chip;
+
+	get_irq_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
+
+	set_irq_chip_and_handler(virq, chip, handle_edge_irq);
+
+	return 0;
+}
+
+static struct irq_host_ops fsl_msi_host_ops = {
+	.map = fsl_msi_host_map,
+};
+
+static irq_hw_number_t fsl_msi_alloc_hwirqs(struct fsl_msi *msi, int num)
+{
+	unsigned long flags;
+	int order = get_count_order(num);
+	int offset;
+
+	spin_lock_irqsave(&msi->bitmap_lock, flags);
+
+	offset = bitmap_find_free_region(msi->fsl_msi_bitmap,
+					NR_MSI_IRQS, order);
+
+	spin_unlock_irqrestore(&msi->bitmap_lock, flags);
+
+	pr_debug("%s: allocated 0x%x (2^%d) at offset 0x%x\n",
+		__func__, num, order, offset);
+
+	return offset;
+}
+
+static void fsl_msi_free_hwirqs(struct fsl_msi *msi, int offset, int num)
+{
+	unsigned long flags;
+	int order = get_count_order(num);
+
+	pr_debug("%s: freeing 0x%x (2^%d) at offset 0x%x\n",
+		__func__, num, order, offset);
+
+	spin_lock_irqsave(&msi->bitmap_lock, flags);
+	bitmap_release_region(msi->fsl_msi_bitmap, offset, order);
+	spin_unlock_irqrestore(&msi->bitmap_lock, flags);
+}
+
+static int fsl_msi_free_dt_hwirqs(struct fsl_msi *msi)
+{
+	int i;
+	int len;
+	const u32 *p;
+
+	bitmap_allocate_region(msi->fsl_msi_bitmap, 0,
+		       get_count_order(NR_MSI_IRQS));
+
+	p = of_get_property(msi->of_node, "msi-available-ranges", &len);
+
+	if (!p) {
+		/* No msi-available-ranges property,
+		 * All the 256 MSI interrupts can be used
+		 */
+		fsl_msi_free_hwirqs(msi, 0, 0x100);
+		return 0;
+	}
+
+	if ((len % (2 * sizeof(u32))) != 0) {
+		printk(KERN_WARNING "fsl_msi: Malformed msi-available-ranges "
+		       "property on %s\n", msi->of_node->full_name);
+		return -EINVAL;
+	}
+
+	/* Format is: (<u32 start> <u32 count>)+ */
+	len /= 2 * sizeof(u32);
+	for (i = 0; i < len; i++, p += 2)
+		fsl_msi_free_hwirqs(msi, *p, *(p + 1));
+
+	return 0;
+}
+
+static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
+{
+	int rc;
+	int size = BITS_TO_LONGS(NR_MSI_IRQS) * sizeof(u32);
+
+	msi_data->fsl_msi_bitmap = kzalloc(size, GFP_KERNEL);
+
+	if (msi_data->fsl_msi_bitmap == NULL) {
+		pr_debug("%s: ENOMEM allocating allocator bitmap!\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	rc = fsl_msi_free_dt_hwirqs(msi_data);
+	if (rc)
+		goto out_free;
+
+	return 0;
+out_free:
+	kfree(msi_data->fsl_msi_bitmap);
+
+	msi_data->fsl_msi_bitmap = NULL;
+	return rc;
+
+}
+
+static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
+{
+	if (type == PCI_CAP_ID_MSIX)
+		pr_debug("fslmsi: MSI-X untested, trying anyway.\n");
+
+	return 0;
+}
+
+static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
+{
+	struct msi_desc *entry;
+	struct fsl_msi *msi_data = fsl_msi;
+
+	list_for_each_entry(entry, &pdev->msi_list, list) {
+		if (entry->irq == NO_IRQ)
+			continue;
+		set_irq_msi(entry->irq, NULL);
+		fsl_msi_free_hwirqs(msi_data, virq_to_hw(entry->irq), 1);
+		irq_dispose_mapping(entry->irq);
+	}
+
+	return;
+}
+
+static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
+				  struct msi_msg *msg)
+{
+	struct fsl_msi *msi_data = fsl_msi;
+
+	msg->address_lo = msi_data->msi_addr_lo;
+	msg->address_hi = msi_data->msi_addr_hi;
+	msg->data = hwirq;
+
+	pr_debug("%s: allocated srs: %d, ibs: %d\n",
+		__func__, hwirq / IRQS_PER_MSI_REG, hwirq % IRQS_PER_MSI_REG);
+}
+
+static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+	irq_hw_number_t hwirq;
+	int rc;
+	unsigned int virq;
+	struct msi_desc *entry;
+	struct msi_msg msg;
+	struct fsl_msi *msi_data = fsl_msi;
+
+	list_for_each_entry(entry, &pdev->msi_list, list) {
+		hwirq = fsl_msi_alloc_hwirqs(msi_data, 1);
+		if (hwirq < 0) {
+			rc = hwirq;
+			pr_debug("%s: fail allocating msi interrupt\n",
+					__func__);
+			goto out_free;
+		}
+
+		virq = irq_create_mapping(msi_data->irqhost, hwirq);
+
+		if (virq == NO_IRQ) {
+			pr_debug("%s: fail mapping hwirq 0x%lx\n",
+					__func__, hwirq);
+			fsl_msi_free_hwirqs(msi_data, hwirq, 1);
+			rc = -ENOSPC;
+			goto out_free;
+		}
+		set_irq_msi(virq, entry);
+
+		fsl_compose_msi_msg(pdev, hwirq, &msg);
+		write_msi_msg(virq, &msg);
+	}
+	return 0;
+
+out_free:
+	return rc;
+}
+
+static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq;
+	struct fsl_msi *msi_data = fsl_msi;
+	int msir_index = -1;
+	u32 msir_value = 0;
+	u32 intr_index;
+	u32 have_shift = 0;
+
+	spin_lock(&desc->lock);
+	if ((msi_data->feature &  FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) {
+		if (desc->chip->mask_ack)
+			desc->chip->mask_ack(irq);
+		else {
+			desc->chip->mask(irq);
+			desc->chip->ack(irq);
+		}
+	}
+
+	if (unlikely(desc->status & IRQ_INPROGRESS))
+		goto unlock;
+
+	msir_index = (int)desc->handler_data;
+
+	if (msir_index >= NR_MSI_REG)
+		cascade_irq = NO_IRQ;
+
+	desc->status |= IRQ_INPROGRESS;
+	switch (fsl_msi->feature & FSL_PIC_IP_MASK) {
+	case FSL_PIC_IP_MPIC:
+		msir_value = fsl_msi_read(msi_data->msi_regs,
+			msir_index * 0x10);
+		break;
+	case FSL_PIC_IP_IPIC:
+		msir_value = fsl_msi_read(msi_data->msi_regs, msir_index * 0x4);
+		break;
+	}
+
+	while (msir_value) {
+		intr_index = ffs(msir_value) - 1;
+
+		cascade_irq = irq_linear_revmap(msi_data->irqhost,
+				msir_index * IRQS_PER_MSI_REG +
+					intr_index + have_shift);
+		if (cascade_irq != NO_IRQ)
+			generic_handle_irq(cascade_irq);
+		have_shift += intr_index + 1;
+		msir_value = msir_value >> (intr_index + 1);
+	}
+	desc->status &= ~IRQ_INPROGRESS;
+
+	switch (msi_data->feature & FSL_PIC_IP_MASK) {
+	case FSL_PIC_IP_MPIC:
+		desc->chip->eoi(irq);
+		break;
+	case FSL_PIC_IP_IPIC:
+		if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+			desc->chip->unmask(irq);
+		break;
+	}
+unlock:
+	spin_unlock(&desc->lock);
+}
+
+static int __devinit fsl_of_msi_probe(struct of_device *dev,
+				const struct of_device_id *match)
+{
+	struct fsl_msi *msi;
+	struct resource res;
+	int err, i, count;
+	int rc;
+	int virt_msir;
+	const u32 *p;
+	struct fsl_msi_feature *features = match->data;
+
+	printk(KERN_DEBUG "Setting up Freescale MSI support\n");
+
+	msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL);
+	if (!msi) {
+		dev_err(&dev->dev, "No memory for MSI structure\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+
+	msi->of_node = of_node_get(dev->node);
+
+	msi->irqhost = irq_alloc_host(of_node_get(dev->node),
+				IRQ_HOST_MAP_LINEAR,
+				NR_MSI_IRQS, &fsl_msi_host_ops, 0);
+	if (msi->irqhost == NULL) {
+		dev_err(&dev->dev, "No memory for MSI irqhost\n");
+		of_node_put(dev->node);
+		err = -ENOMEM;
+		goto error_out;
+	}
+
+	/* Get the MSI reg base */
+	err = of_address_to_resource(dev->node, 0, &res);
+	if (err) {
+		dev_err(&dev->dev, "%s resource error!\n",
+				dev->node->full_name);
+		goto error_out;
+	}
+
+	msi->msi_regs = ioremap(res.start, res.end - res.start + 1);
+	if (!msi->msi_regs) {
+		dev_err(&dev->dev, "ioremap problem failed\n");
+		goto error_out;
+	}
+
+	msi->feature = features->fsl_pic_ip;
+
+	msi->irqhost->host_data = msi;
+
+	msi->msi_addr_hi = 0x0;
+	msi->msi_addr_lo = res.start + features->msiir_offset;
+
+	rc = fsl_msi_init_allocator(msi);
+	if (rc) {
+		dev_err(&dev->dev, "Error allocating MSI bitmap\n");
+		goto error_out;
+	}
+
+	p = of_get_property(dev->node, "interrupts", &count);
+	if (!p) {
+		dev_err(&dev->dev, "no interrupts property found on %s\n",
+				dev->node->full_name);
+		err = -ENODEV;
+		goto error_out;
+	}
+	if (count % 8 != 0) {
+		dev_err(&dev->dev, "Malformed interrupts property on %s\n",
+				dev->node->full_name);
+		err = -EINVAL;
+		goto error_out;
+	}
+
+	count /= sizeof(u32);
+	for (i = 0; i < count / 2; i++) {
+		if (i > NR_MSI_REG)
+			break;
+		virt_msir = irq_of_parse_and_map(dev->node, i);
+		if (virt_msir != NO_IRQ) {
+			set_irq_data(virt_msir, (void *)i);
+			set_irq_chained_handler(virt_msir, fsl_msi_cascade);
+		}
+	}
+
+	fsl_msi = msi;
+
+	WARN_ON(ppc_md.setup_msi_irqs);
+	ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
+	ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
+	ppc_md.msi_check_device = fsl_msi_check_device;
+	return 0;
+error_out:
+	kfree(msi);
+	return err;
+}
+
+static const struct fsl_msi_feature mpic_msi_feature = {
+	.fsl_pic_ip = FSL_PIC_IP_MPIC,
+	.msiir_offset = 0x140,
+};
+
+static const struct fsl_msi_feature ipic_msi_feature = {
+	.fsl_pic_ip = FSL_PIC_IP_IPIC,
+	.msiir_offset = 0x38,
+};
+
+static const struct of_device_id fsl_of_msi_ids[] = {
+	{
+		.compatible = "fsl,mpic-msi",
+		.data = (void *)&mpic_msi_feature,
+	},
+	{
+		.compatible = "fsl,ipic-msi",
+		.data = (void *)&ipic_msi_feature,
+	},
+	{}
+};
+
+static struct of_platform_driver fsl_of_msi_driver = {
+	.name = "fsl-msi",
+	.match_table = fsl_of_msi_ids,
+	.probe = fsl_of_msi_probe,
+};
+
+static __init int fsl_of_msi_init(void)
+{
+	return of_register_platform_driver(&fsl_of_msi_driver);
+}
+
+subsys_initcall(fsl_of_msi_init);
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
new file mode 100644
index 000000000000..a653468521fa
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Tony Li <tony.li@freescale.com>
+ *	   Jason Jin <Jason.jin@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+#ifndef _POWERPC_SYSDEV_FSL_MSI_H
+#define _POWERPC_SYSDEV_FSL_MSI_H
+
+#define NR_MSI_REG		8
+#define IRQS_PER_MSI_REG	32
+#define NR_MSI_IRQS	(NR_MSI_REG * IRQS_PER_MSI_REG)
+
+#define FSL_PIC_IP_MASK	0x0000000F
+#define FSL_PIC_IP_MPIC	0x00000001
+#define FSL_PIC_IP_IPIC	0x00000002
+
+struct fsl_msi {
+	/* Device node of the MSI interrupt*/
+	struct device_node *of_node;
+
+	struct irq_host *irqhost;
+
+	unsigned long cascade_irq;
+
+	u32 msi_addr_lo;
+	u32 msi_addr_hi;
+	void __iomem *msi_regs;
+	u32 feature;
+
+	unsigned long *fsl_msi_bitmap;
+	spinlock_t bitmap_lock;
+};
+
+#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
+
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index bf13c2174a4e..61e6d77efa4f 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -27,6 +27,7 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
 /* atmu setup for fsl pci/pcie controller */
 void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
 {
@@ -106,6 +107,16 @@ void __init setup_pci_cmd(struct pci_controller *hose)
 	}
 }
 
+static void __init setup_pci_pcsrbar(struct pci_controller *hose)
+{
+#ifdef CONFIG_PCI_MSI
+	phys_addr_t immr_base;
+
+	immr_base = get_immrbase();
+	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
+#endif
+}
+
 static int fsl_pcie_bus_fixup;
 
 static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
@@ -211,6 +222,8 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	/* Setup PEX window registers */
 	setup_pci_atmu(hose, &rsrc);
 
+	/* Setup PEXCSRBAR */
+	setup_pci_pcsrbar(hose);
 	return 0;
 }
 
@@ -231,6 +244,68 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+
+#if defined(CONFIG_PPC_83xx)
+int __init mpc83xx_add_bridge(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+	struct resource rsrc;
+	const int *bus_range;
+	int primary = 1, has_address = 0;
+	phys_addr_t immr = get_immrbase();
+
+	pr_debug("Adding PCI host bridge %s\n", dev->full_name);
+
+	/* Fetch host bridge registers address */
+	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+	/* Get bus range if any */
+	bus_range = of_get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
+	}
+
+	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+	hose = pcibios_alloc_controller(dev);
+	if (!hose)
+		return -ENOMEM;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
+	 * the other at 0x8600, we consider the 0x8500 the primary controller
+	 */
+	/* PCI 1 */
+	if ((rsrc.start & 0xfffff) == 0x8500) {
+		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
+	}
+	/* PCI 2 */
+	if ((rsrc.start & 0xfffff) == 0x8600) {
+		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
+		primary = 0;
+	}
+
+	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
+	       "Firmware bus number: %d->%d\n",
+	       (unsigned long long)rsrc.start, hose->first_busno,
+	       hose->last_busno);
+
+	pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+	    hose, hose->cfg_addr, hose->cfg_data);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+
+	return 0;
+}
+#endif /* CONFIG_PPC_83xx */
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index 37b04ad26571..13f30c2a61e7 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -83,6 +83,7 @@ struct ccsr_pci {
 
 extern int fsl_add_bridge(struct device_node *dev, int is_primary);
 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
+extern int mpc83xx_add_bridge(struct device_node *dev);
 
 #endif /* __POWERPC_FSL_PCI_H */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 019657c110b6..214388e11807 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -207,66 +207,58 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-static int __init gfar_mdio_of_init(void)
+static int gfar_mdio_of_init_one(struct device_node *np)
 {
-	struct device_node *np = NULL;
+	int k;
+	struct device_node *child = NULL;
+	struct gianfar_mdio_data mdio_data;
 	struct platform_device *mdio_dev;
 	struct resource res;
 	int ret;
 
-	np = of_find_compatible_node(np, NULL, "fsl,gianfar-mdio");
-
-	/* try the deprecated version */
-	if (!np)
-		np = of_find_compatible_node(np, "mdio", "gianfar");
+	memset(&res, 0, sizeof(res));
+	memset(&mdio_data, 0, sizeof(mdio_data));
 
-	if (np) {
-		int k;
-		struct device_node *child = NULL;
-		struct gianfar_mdio_data mdio_data;
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return ret;
 
-		memset(&res, 0, sizeof(res));
-		memset(&mdio_data, 0, sizeof(mdio_data));
+	mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
+			res.start&0xfffff, &res, 1);
+	if (IS_ERR(mdio_dev))
+		return PTR_ERR(mdio_dev);
 
-		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
-			goto err;
+	for (k = 0; k < 32; k++)
+		mdio_data.irq[k] = PHY_POLL;
 
-		mdio_dev =
-		    platform_device_register_simple("fsl-gianfar_mdio",
-						    res.start, &res, 1);
-		if (IS_ERR(mdio_dev)) {
-			ret = PTR_ERR(mdio_dev);
-			goto err;
+	while ((child = of_get_next_child(np, child)) != NULL) {
+		int irq = irq_of_parse_and_map(child, 0);
+		if (irq != NO_IRQ) {
+			const u32 *id = of_get_property(child, "reg", NULL);
+			mdio_data.irq[*id] = irq;
 		}
+	}
 
-		for (k = 0; k < 32; k++)
-			mdio_data.irq[k] = PHY_POLL;
+	ret = platform_device_add_data(mdio_dev, &mdio_data,
+				sizeof(struct gianfar_mdio_data));
+	if (ret)
+		platform_device_unregister(mdio_dev);
 
-		while ((child = of_get_next_child(np, child)) != NULL) {
-			int irq = irq_of_parse_and_map(child, 0);
-			if (irq != NO_IRQ) {
-				const u32 *id = of_get_property(child,
-							"reg", NULL);
-				mdio_data.irq[*id] = irq;
-			}
-		}
+	return ret;
+}
 
-		ret =
-		    platform_device_add_data(mdio_dev, &mdio_data,
-					     sizeof(struct gianfar_mdio_data));
-		if (ret)
-			goto unreg;
-	}
+static int __init gfar_mdio_of_init(void)
+{
+	struct device_node *np = NULL;
 
-	of_node_put(np);
-	return 0;
+	for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
+		gfar_mdio_of_init_one(np);
 
-unreg:
-	platform_device_unregister(mdio_dev);
-err:
-	of_node_put(np);
-	return ret;
+	/* try the deprecated version */
+	for_each_compatible_node(np, "mdio", "gianfar");
+		gfar_mdio_of_init_one(np);
+
+	return 0;
 }
 
 arch_initcall(gfar_mdio_of_init);
@@ -296,6 +288,9 @@ static int __init gfar_of_init(void)
 		const phandle *ph;
 		int n_res = 2;
 
+		if (!of_device_is_available(np))
+			continue;
+
 		memset(r, 0, sizeof(r));
 		memset(&gfar_data, 0, sizeof(gfar_data));
 
@@ -357,6 +352,9 @@ static int __init gfar_of_init(void)
 		else
 			gfar_data.interface = PHY_INTERFACE_MODE_MII;
 
+		if (of_get_property(np, "fsl,magic-packet", NULL))
+			gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
+
 		ph = of_get_property(np, "phy-handle", NULL);
 		if (ph == NULL) {
 			u32 *fixed_link;
@@ -390,7 +388,7 @@ static int __init gfar_of_init(void)
 
 			gfar_data.phy_id = *id;
 			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
-				 (unsigned long long)res.start);
+				 (unsigned long long)res.start&0xfffff);
 
 			of_node_put(phy);
 			of_node_put(mdio);
@@ -414,128 +412,6 @@ err:
 
 arch_initcall(gfar_of_init);
 
-#ifdef CONFIG_I2C_BOARDINFO
-#include <linux/i2c.h>
-struct i2c_driver_device {
-	char	*of_device;
-	char	*i2c_type;
-};
-
-static struct i2c_driver_device i2c_devices[] __initdata = {
-	{"ricoh,rs5c372a", "rs5c372a"},
-	{"ricoh,rs5c372b", "rs5c372b"},
-	{"ricoh,rv5c386",  "rv5c386"},
-	{"ricoh,rv5c387a", "rv5c387a"},
-	{"dallas,ds1307",  "ds1307"},
-	{"dallas,ds1337",  "ds1337"},
-	{"dallas,ds1338",  "ds1338"},
-	{"dallas,ds1339",  "ds1339"},
-	{"dallas,ds1340",  "ds1340"},
-	{"stm,m41t00",     "m41t00"},
-	{"dallas,ds1374",  "ds1374"},
-};
-
-static int __init of_find_i2c_driver(struct device_node *node,
-				     struct i2c_board_info *info)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
-		if (!of_device_is_compatible(node, i2c_devices[i].of_device))
-			continue;
-		if (strlcpy(info->type, i2c_devices[i].i2c_type,
-			    I2C_NAME_SIZE) >= I2C_NAME_SIZE)
-			return -ENOMEM;
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static void __init of_register_i2c_devices(struct device_node *adap_node,
-					   int bus_num)
-{
-	struct device_node *node = NULL;
-
-	while ((node = of_get_next_child(adap_node, node))) {
-		struct i2c_board_info info = {};
-		const u32 *addr;
-		int len;
-
-		addr = of_get_property(node, "reg", &len);
-		if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
-			printk(KERN_WARNING "fsl_soc.c: invalid i2c device entry\n");
-			continue;
-		}
-
-		info.irq = irq_of_parse_and_map(node, 0);
-		if (info.irq == NO_IRQ)
-			info.irq = -1;
-
-		if (of_find_i2c_driver(node, &info) < 0)
-			continue;
-
-		info.addr = *addr;
-
-		i2c_register_board_info(bus_num, &info, 1);
-	}
-}
-
-static int __init fsl_i2c_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i = 0;
-	struct platform_device *i2c_dev;
-	int ret;
-
-	for_each_compatible_node(np, NULL, "fsl-i2c") {
-		struct resource r[2];
-		struct fsl_i2c_platform_data i2c_data;
-		const unsigned char *flags = NULL;
-
-		memset(&r, 0, sizeof(r));
-		memset(&i2c_data, 0, sizeof(i2c_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		of_irq_to_resource(np, 0, &r[1]);
-
-		i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
-		if (IS_ERR(i2c_dev)) {
-			ret = PTR_ERR(i2c_dev);
-			goto err;
-		}
-
-		i2c_data.device_flags = 0;
-		flags = of_get_property(np, "dfsrr", NULL);
-		if (flags)
-			i2c_data.device_flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
-
-		flags = of_get_property(np, "fsl5200-clocking", NULL);
-		if (flags)
-			i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200;
-
-		ret =
-		    platform_device_add_data(i2c_dev, &i2c_data,
-					     sizeof(struct
-						    fsl_i2c_platform_data));
-		if (ret)
-			goto unreg;
-
-		of_register_i2c_devices(np, i++);
-	}
-
-	return 0;
-
-unreg:
-	platform_device_unregister(i2c_dev);
-err:
-	return ret;
-}
-
-arch_initcall(fsl_i2c_of_init);
-#endif
 
 #ifdef CONFIG_PPC_83xx
 static int __init mpc83xx_wdt_init(void)
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 52c831fa1886..024299887352 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -10,6 +10,7 @@ extern u32 get_baudrate(void);
 extern u32 fsl_get_sys_freq(void);
 
 struct spi_board_info;
+struct device_node;
 
 extern int fsl_spi_init(struct spi_board_info *board_infos,
 			unsigned int num_board_infos,
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 216c0f5680d2..a96584ab33dd 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -276,7 +276,7 @@ void i8259_init(struct device_node *node, unsigned long intack_addr)
 	spin_unlock_irqrestore(&i8259_lock, flags);
 
 	/* create a legacy host */
-	i8259_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LEGACY,
+	i8259_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
 				    0, &i8259_host_ops, 0);
 	if (i8259_host == NULL) {
 		printk(KERN_ERR "i8259: failed to allocate irq host !\n");
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index cfbd2aae93e8..7fd49c97501a 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -123,6 +123,12 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			(bus->number == hose->first_busno))
 		val &= 0xffffff00;
 
+	/* Workaround for PCI_28 Errata in 440EPx/GRx */
+	if ((hose->indirect_type & PPC_INDIRECT_TYPE_BROKEN_MRM) &&
+			offset == PCI_CACHE_LINE_SIZE) {
+		val = 0;
+	}
+
 	/*
 	 * Note: the caller has already checked that offset is
 	 * suitably aligned and that len is 1, 2 or 4.
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 0f2dfb0aaa6a..88a983ece5c9 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
+#include <linux/fsl_devices.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -725,25 +726,21 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	struct resource res;
 	u32 temp = 0, ret;
 
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return NULL;
+
 	ipic = alloc_bootmem(sizeof(struct ipic));
 	if (ipic == NULL)
 		return NULL;
 
 	memset(ipic, 0, sizeof(struct ipic));
 
-	ipic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       NR_IPIC_INTS,
 				       &ipic_host_ops, 0);
-	if (ipic->irqhost == NULL) {
-		of_node_put(node);
-		return NULL;
-	}
-
-	ret = of_address_to_resource(node, 0, &res);
-	if (ret) {
-		of_node_put(node);
+	if (ipic->irqhost == NULL)
 		return NULL;
-	}
 
 	ipic->regs = ioremap(res.start, res.end - res.start + 1);
 
@@ -893,8 +890,78 @@ unsigned int ipic_get_irq(void)
 	return irq_linear_revmap(primary_ipic->irqhost, irq);
 }
 
+#ifdef CONFIG_PM
+static struct {
+	u32 sicfr;
+	u32 siprr[2];
+	u32 simsr[2];
+	u32 sicnr;
+	u32 smprr[2];
+	u32 semsr;
+	u32 secnr;
+	u32 sermr;
+	u32 sercr;
+} ipic_saved_state;
+
+static int ipic_suspend(struct sys_device *sdev, pm_message_t state)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_saved_state.sicfr = ipic_read(ipic->regs, IPIC_SICFR);
+	ipic_saved_state.siprr[0] = ipic_read(ipic->regs, IPIC_SIPRR_A);
+	ipic_saved_state.siprr[1] = ipic_read(ipic->regs, IPIC_SIPRR_D);
+	ipic_saved_state.simsr[0] = ipic_read(ipic->regs, IPIC_SIMSR_H);
+	ipic_saved_state.simsr[1] = ipic_read(ipic->regs, IPIC_SIMSR_L);
+	ipic_saved_state.sicnr = ipic_read(ipic->regs, IPIC_SICNR);
+	ipic_saved_state.smprr[0] = ipic_read(ipic->regs, IPIC_SMPRR_A);
+	ipic_saved_state.smprr[1] = ipic_read(ipic->regs, IPIC_SMPRR_B);
+	ipic_saved_state.semsr = ipic_read(ipic->regs, IPIC_SEMSR);
+	ipic_saved_state.secnr = ipic_read(ipic->regs, IPIC_SECNR);
+	ipic_saved_state.sermr = ipic_read(ipic->regs, IPIC_SERMR);
+	ipic_saved_state.sercr = ipic_read(ipic->regs, IPIC_SERCR);
+
+	if (fsl_deep_sleep()) {
+		/* In deep sleep, make sure there can be no
+		 * pending interrupts, as this can cause
+		 * problems on 831x.
+		 */
+		ipic_write(ipic->regs, IPIC_SIMSR_H, 0);
+		ipic_write(ipic->regs, IPIC_SIMSR_L, 0);
+		ipic_write(ipic->regs, IPIC_SEMSR, 0);
+		ipic_write(ipic->regs, IPIC_SERMR, 0);
+	}
+
+	return 0;
+}
+
+static int ipic_resume(struct sys_device *sdev)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_write(ipic->regs, IPIC_SICFR, ipic_saved_state.sicfr);
+	ipic_write(ipic->regs, IPIC_SIPRR_A, ipic_saved_state.siprr[0]);
+	ipic_write(ipic->regs, IPIC_SIPRR_D, ipic_saved_state.siprr[1]);
+	ipic_write(ipic->regs, IPIC_SIMSR_H, ipic_saved_state.simsr[0]);
+	ipic_write(ipic->regs, IPIC_SIMSR_L, ipic_saved_state.simsr[1]);
+	ipic_write(ipic->regs, IPIC_SICNR, ipic_saved_state.sicnr);
+	ipic_write(ipic->regs, IPIC_SMPRR_A, ipic_saved_state.smprr[0]);
+	ipic_write(ipic->regs, IPIC_SMPRR_B, ipic_saved_state.smprr[1]);
+	ipic_write(ipic->regs, IPIC_SEMSR, ipic_saved_state.semsr);
+	ipic_write(ipic->regs, IPIC_SECNR, ipic_saved_state.secnr);
+	ipic_write(ipic->regs, IPIC_SERMR, ipic_saved_state.sermr);
+	ipic_write(ipic->regs, IPIC_SERCR, ipic_saved_state.sercr);
+
+	return 0;
+}
+#else
+#define ipic_suspend NULL
+#define ipic_resume NULL
+#endif
+
 static struct sysdev_class ipic_sysclass = {
 	.name = "ipic",
+	.suspend = ipic_suspend,
+	.resume = ipic_resume,
 };
 
 static struct sys_device device_ipic = {
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 7680001676a6..8e3478c995ef 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1016,13 +1016,11 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	memset(mpic, 0, sizeof(struct mpic));
 	mpic->name = name;
 
-	mpic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       isu_size, &mpic_host_ops,
 				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
-	if (mpic->irqhost == NULL) {
-		of_node_put(node);
+	if (mpic->irqhost == NULL)
 		return NULL;
-	}
 
 	mpic->irqhost->host_data = mpic;
 	mpic->hc_irq = mpic_irq_chip;
@@ -1143,10 +1141,14 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
 	mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
 			  >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
-	if (isu_size == 0)
-		mpic->num_sources =
-			((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
-			 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+	if (isu_size == 0) {
+		if (flags & MPIC_BROKEN_FRR_NIRQS)
+			mpic->num_sources = mpic->irq_count;
+		else
+			mpic->num_sources =
+				((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+				 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+	}
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
@@ -1494,7 +1496,7 @@ void mpic_request_ipis(void)
 	static char *ipi_names[] = {
 		"IPI0 (call function)",
 		"IPI1 (reschedule)",
-		"IPI2 (unused)",
+		"IPI2 (call function single)",
 		"IPI3 (debugger break)",
 	};
 	BUG_ON(mpic == NULL);
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index d272a52ecd24..de3e5e8bc324 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -16,6 +16,7 @@
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
 
+#include <sysdev/mpic.h>
 
 static void __mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
 {
diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c
index 33cbfb22ce3e..68aff6076675 100644
--- a/arch/powerpc/sysdev/mpic_pasemi_msi.c
+++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c
@@ -95,6 +95,7 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
+	int ret;
 
 	pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
 		 pdev, nvec, type);
@@ -108,8 +109,9 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		 * few MSIs for someone, but restrictions will apply to how the
 		 * sources can be changed independently.
 		 */
-		hwirq = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
-		if (hwirq < 0) {
+		ret = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
+		hwirq = ret;
+		if (ret < 0) {
 			pr_debug("pasemi_msi: failed allocating hwirq\n");
 			return hwirq;
 		}
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 1d5a40899b74..6e2f8686fdfc 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -115,17 +115,19 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 	struct msi_desc *entry;
 	struct msi_msg msg;
 	u64 addr;
+	int ret;
 
 	addr = find_ht_magic_addr(pdev);
 	msg.address_lo = addr & 0xFFFFFFFF;
 	msg.address_hi = addr >> 32;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
-		hwirq = mpic_msi_alloc_hwirqs(msi_mpic, 1);
-		if (hwirq < 0) {
+		ret = mpic_msi_alloc_hwirqs(msi_mpic, 1);
+		if (ret < 0) {
 			pr_debug("u3msi: failed allocating hwirq\n");
-			return hwirq;
+			return ret;
 		}
+		hwirq = ret;
 
 		virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
 		if (virq == NO_IRQ) {
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index a132e0de8ca5..32e0ad0ebea8 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -15,6 +15,7 @@
 #include <linux/console.h>
 #include <linux/mv643xx.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 
 #include <asm/prom.h>
 
@@ -25,6 +26,11 @@
  * PowerPC of_platform_bus_type.  They support platform_bus_type instead.
  */
 
+static struct of_device_id __initdata of_mv64x60_devices[] = {
+	{ .compatible = "marvell,mv64306-devctrl", },
+	{}
+};
+
 /*
  * Create MPSC platform devices
  */
@@ -484,6 +490,10 @@ static int __init mv64x60_device_setup(void)
 		of_node_put(np);
 	}
 
+	/* Now add every node that is on the device bus */
+	for_each_compatible_node(np, NULL, "marvell,mv64360")
+		of_platform_bus_probe(np, of_mv64x60_devices, NULL);
+
 	return 0;
 }
 arch_initcall(mv64x60_device_setup);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index b4a54c52e880..fb368dfde5d4 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -75,6 +75,11 @@ static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
 	    !of_device_is_compatible(hose->dn, "ibm,plb-pci"))
 		return;
 
+	if (of_device_is_compatible(hose->dn, "ibm,plb440epx-pci") ||
+		of_device_is_compatible(hose->dn, "ibm,plb440grx-pci")) {
+		hose->indirect_type |= PPC_INDIRECT_TYPE_BROKEN_MRM;
+	}
+
 	/* Hide the PCI host BARs from the kernel as their content doesn't
 	 * fit well in the resource management
 	 */
@@ -1634,6 +1639,15 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
 	}
 	port = &ppc4xx_pciex_ports[portno];
 	port->index = portno;
+
+	/*
+	 * Check if device is enabled
+	 */
+	if (!of_device_is_available(np)) {
+		printk(KERN_INFO "PCIE%d: Port disabled via device-tree\n", port->index);
+		return;
+	}
+
 	port->node = of_node_get(np);
 	pval = of_get_property(np, "sdr-base", NULL);
 	if (pval == NULL) {
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index adc66212a419..1ce546462be5 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -20,3 +20,16 @@ config UCC
 	bool
 	default y if UCC_FAST || UCC_SLOW
 
+config QE_USB
+	bool
+	help
+	  QE USB Host Controller support
+
+config QE_GPIO
+	bool "QE GPIO support"
+	depends on QUICC_ENGINE
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  QE GPIOs.
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
index 874fe1a5b1cf..f1855c185291 100644
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
 obj-$(CONFIG_UCC)	+= ucc.o
 obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
 obj-$(CONFIG_UCC_FAST)	+= ucc_fast.o
+obj-$(CONFIG_QE_USB)	+= usb.o
+obj-$(CONFIG_QE_GPIO)	+= gpio.o
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
new file mode 100644
index 000000000000..8e5a0bc36d0b
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -0,0 +1,149 @@
+/*
+ * QUICC Engine GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+
+struct qe_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct qe_gpio_chip *
+to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
+}
+
+static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+
+	qe_gc->cpdata = in_be32(&regs->cpdata);
+}
+
+static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+	return in_be32(&regs->cpdata) & pin_mask;
+}
+
+static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	if (val)
+		qe_gc->cpdata |= pin_mask;
+	else
+		qe_gc->cpdata &= ~pin_mask;
+
+	out_be32(&regs->cpdata, qe_gc->cpdata);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
+static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	return 0;
+}
+
+static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	qe_gpio_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int __init qe_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
+		int ret;
+		struct qe_gpio_chip *qe_gc;
+		struct of_mm_gpio_chip *mm_gc;
+		struct of_gpio_chip *of_gc;
+		struct gpio_chip *gc;
+
+		qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
+		if (!qe_gc) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		spin_lock_init(&qe_gc->lock);
+
+		mm_gc = &qe_gc->mm_gc;
+		of_gc = &mm_gc->of_gc;
+		gc = &of_gc->gc;
+
+		mm_gc->save_regs = qe_gpio_save_regs;
+		of_gc->gpio_cells = 2;
+		gc->ngpio = QE_PIO_PINS;
+		gc->direction_input = qe_gpio_dir_in;
+		gc->direction_output = qe_gpio_dir_out;
+		gc->get = qe_gpio_get;
+		gc->set = qe_gpio_set;
+
+		ret = of_mm_gpiochip_add(np, mm_gc);
+		if (ret)
+			goto err;
+		continue;
+err:
+		pr_err("%s: registration failed with status %d\n",
+		       np->full_name, ret);
+		kfree(qe_gc);
+		/* try others anyway */
+	}
+	return 0;
+}
+arch_initcall(qe_add_gpiochips);
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index cff550eec7e8..b3b73ae57d6d 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -35,7 +35,6 @@
 #include <asm/rheap.h>
 
 static void qe_snums_init(void);
-static void qe_muram_init(void);
 static int qe_sdma_init(void);
 
 static DEFINE_SPINLOCK(qe_lock);
@@ -65,7 +64,7 @@ static phys_addr_t qebase = -1;
 phys_addr_t get_qe_base(void)
 {
 	struct device_node *qe;
-	unsigned int size;
+	int size;
 	const u32 *prop;
 
 	if (qebase != -1)
@@ -88,7 +87,7 @@ phys_addr_t get_qe_base(void)
 
 EXPORT_SYMBOL(get_qe_base);
 
-void qe_reset(void)
+void __init qe_reset(void)
 {
 	if (qe_immr == NULL)
 		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
@@ -159,7 +158,7 @@ static unsigned int brg_clk = 0;
 unsigned int qe_get_brg_clk(void)
 {
 	struct device_node *qe;
-	unsigned int size;
+	int size;
 	const u32 *prop;
 
 	if (brg_clk)
@@ -306,7 +305,7 @@ EXPORT_SYMBOL(qe_put_snum);
 
 static int qe_sdma_init(void)
 {
-	struct sdma *sdma = &qe_immr->sdma;
+	struct sdma __iomem *sdma = &qe_immr->sdma;
 	unsigned long sdma_buf_offset;
 
 	if (!sdma)
@@ -325,97 +324,6 @@ static int qe_sdma_init(void)
 	return 0;
 }
 
-/*
- * muram_alloc / muram_free bits.
- */
-static DEFINE_SPINLOCK(qe_muram_lock);
-
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t qe_boot_muram_rh_block[16];
-static rh_info_t qe_muram_info;
-
-static void qe_muram_init(void)
-{
-	struct device_node *np;
-	const u32 *address;
-	u64 size;
-	unsigned int flags;
-
-	/* initialize the info header */
-	rh_init(&qe_muram_info, 1,
-		sizeof(qe_boot_muram_rh_block) /
-		sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
-
-	/* Attach the usable muram area */
-	/* XXX: This is a subset of the available muram. It
-	 * varies with the processor and the microcode patches activated.
-	 */
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
-	if (!np) {
-		np = of_find_node_by_name(NULL, "data-only");
-		if (!np) {
-			WARN_ON(1);
-			return;
-		}
-	}
-
-	address = of_get_address(np, 0, &size, &flags);
-	WARN_ON(!address);
-
-	of_node_put(np);
-	if (address)
-		rh_attach_region(&qe_muram_info, *address, (int)size);
-}
-
-/* This function returns an index into the MURAM area.
- */
-unsigned long qe_muram_alloc(int size, int align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_muram_lock, flags);
-	start = rh_alloc_align(&qe_muram_info, size, align, "QE");
-	spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(qe_muram_alloc);
-
-int qe_muram_free(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_muram_lock, flags);
-	ret = rh_free(&qe_muram_info, offset);
-	spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(qe_muram_free);
-
-/* not sure if this is ever needed */
-unsigned long qe_muram_alloc_fixed(unsigned long offset, int size)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_muram_lock, flags);
-	start = rh_alloc_fixed(&qe_muram_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(qe_muram_alloc_fixed);
-
-void qe_muram_dump(void)
-{
-	rh_dump(&qe_muram_info);
-}
-EXPORT_SYMBOL(qe_muram_dump);
-
 /* The maximum number of RISCs we support */
 #define MAX_QE_RISC     2
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index f59444d3be75..63cdf9887f36 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -329,21 +329,19 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 	struct resource res;
 	u32 temp = 0, ret, high_active = 0;
 
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return;
+
 	qe_ic = alloc_bootmem(sizeof(struct qe_ic));
 	if (qe_ic == NULL)
 		return;
 
 	memset(qe_ic, 0, sizeof(struct qe_ic));
 
-	qe_ic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
-	if (qe_ic->irqhost == NULL) {
-		of_node_put(node);
-		return;
-	}
-
-	ret = of_address_to_resource(node, 0, &res);
-	if (ret)
+	if (qe_ic->irqhost == NULL)
 		return;
 
 	qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index 93916a48afec..7c87460179ef 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -28,21 +28,7 @@
 
 #undef DEBUG
 
-#define NUM_OF_PINS	32
-
-struct port_regs {
-	__be32	cpodr;		/* Open drain register */
-	__be32	cpdata;		/* Data register */
-	__be32	cpdir1;		/* Direction register */
-	__be32	cpdir2;		/* Direction register */
-	__be32	cppar1;		/* Pin assignment register */
-	__be32	cppar2;		/* Pin assignment register */
-#ifdef CONFIG_PPC_85xx
-	u8	pad[8];
-#endif
-};
-
-static struct port_regs __iomem *par_io;
+static struct qe_pio_regs __iomem *par_io;
 static int num_par_io_ports = 0;
 
 int par_io_init(struct device_node *np)
@@ -64,69 +50,79 @@ int par_io_init(struct device_node *np)
 	return 0;
 }
 
-int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-		      int assignment, int has_irq)
+void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
+			 int open_drain, int assignment, int has_irq)
 {
-	u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val;
-
-	if (!par_io)
-		return -1;
+	u32 pin_mask1bit;
+	u32 pin_mask2bits;
+	u32 new_mask2bits;
+	u32 tmp_val;
 
 	/* calculate pin location for single and 2 bits information */
-	pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1)));
+	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
 
 	/* Set open drain, if required */
-	tmp_val = in_be32(&par_io[port].cpodr);
+	tmp_val = in_be32(&par_io->cpodr);
 	if (open_drain)
-		out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val);
+		out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
 	else
-		out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val);
+		out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
 
 	/* define direction */
-	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
-		in_be32(&par_io[port].cpdir2) :
-		in_be32(&par_io[port].cpdir1);
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cpdir2) :
+		in_be32(&par_io->cpdir1);
 
 	/* get all bits mask for 2 bit per port */
-	pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS -
-				(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
 
 	/* Get the final mask we need for the right definition */
-	new_mask2bits = (u32) (dir << (NUM_OF_PINS -
-				(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	new_mask2bits = (u32) (dir << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
 
 	/* clear and set 2 bits mask */
-	if (pin > (NUM_OF_PINS / 2) - 1) {
-		out_be32(&par_io[port].cpdir2,
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cpdir2,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val);
+		out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
 	} else {
-		out_be32(&par_io[port].cpdir1,
+		out_be32(&par_io->cpdir1,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val);
+		out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
 	}
 	/* define pin assignment */
-	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
-		in_be32(&par_io[port].cppar2) :
-		in_be32(&par_io[port].cppar1);
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cppar2) :
+		in_be32(&par_io->cppar1);
 
-	new_mask2bits = (u32) (assignment << (NUM_OF_PINS -
-			(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
+			(pin % (QE_PIO_PINS / 2) + 1) * 2));
 	/* clear and set 2 bits mask */
-	if (pin > (NUM_OF_PINS / 2) - 1) {
-		out_be32(&par_io[port].cppar2,
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cppar2,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val);
+		out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
 	} else {
-		out_be32(&par_io[port].cppar1,
+		out_be32(&par_io->cppar1,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val);
+		out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
 	}
+}
+EXPORT_SYMBOL(__par_io_config_pin);
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+		      int assignment, int has_irq)
+{
+	if (!par_io || port >= num_par_io_ports)
+		return -EINVAL;
 
+	__par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
+			    has_irq);
 	return 0;
 }
 EXPORT_SYMBOL(par_io_config_pin);
@@ -137,10 +133,10 @@ int par_io_data_set(u8 port, u8 pin, u8 val)
 
 	if (port >= num_par_io_ports)
 		return -EINVAL;
-	if (pin >= NUM_OF_PINS)
+	if (pin >= QE_PIO_PINS)
 		return -EINVAL;
 	/* calculate pin location */
-	pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin));
+	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
 
 	tmp_val = in_be32(&par_io[port].cpdata);
 
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index 0e348d9af8a6..1d78071aad7d 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -26,7 +26,8 @@
 #include <asm/qe.h>
 #include <asm/ucc.h>
 
-static DEFINE_SPINLOCK(ucc_lock);
+DEFINE_SPINLOCK(cmxgcr_lock);
+EXPORT_SYMBOL(cmxgcr_lock);
 
 int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
 {
@@ -35,10 +36,10 @@ int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
 	if (ucc_num > UCC_MAX_NUM - 1)
 		return -EINVAL;
 
-	spin_lock_irqsave(&ucc_lock, flags);
+	spin_lock_irqsave(&cmxgcr_lock, flags);
 	clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
 		ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
-	spin_unlock_irqrestore(&ucc_lock, flags);
+	spin_unlock_irqrestore(&cmxgcr_lock, flags);
 
 	return 0;
 }
@@ -87,7 +88,7 @@ int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
 	return 0;
 }
 
-static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
 	unsigned int *reg_num, unsigned int *shift)
 {
 	unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
@@ -99,7 +100,7 @@ static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
 
 int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 {
-	__be32 *cmxucr;
+	__be32 __iomem *cmxucr;
 	unsigned int reg_num;
 	unsigned int shift;
 
@@ -120,7 +121,7 @@ int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
 	enum comm_dir mode)
 {
-	__be32 *cmxucr;
+	__be32 __iomem *cmxucr;
 	unsigned int reg_num;
 	unsigned int shift;
 	u32 clock_bits = 0;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index bcf88e6ce962..1aecb075a72e 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -46,7 +46,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
 	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
 	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
 	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
@@ -68,7 +68,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
 	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
 }
 EXPORT_SYMBOL(ucc_fast_dump_regs);
 
@@ -96,7 +96,7 @@ EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
 
 void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 
 	uf_regs = uccf->uf_regs;
@@ -117,7 +117,7 @@ EXPORT_SYMBOL(ucc_fast_enable);
 
 void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 
 	uf_regs = uccf->uf_regs;
@@ -139,7 +139,7 @@ EXPORT_SYMBOL(ucc_fast_disable);
 int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
 {
 	struct ucc_fast_private *uccf;
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 	int ret;
 
@@ -216,10 +216,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->stopped_tx = 0;
 	uccf->stopped_rx = 0;
 	uf_regs = uccf->uf_regs;
-	uccf->p_ucce = (u32 *) & (uf_regs->ucce);
-	uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+	uccf->p_ucce = &uf_regs->ucce;
+	uccf->p_uccm = &uf_regs->uccm;
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
-	uccf->p_utodr = (u16 *) & (uf_regs->utodr);
+	uccf->p_utodr = &uf_regs->utodr;
 #endif
 #ifdef STATISTICS
 	uccf->tx_frames = 0;
diff --git a/arch/powerpc/sysdev/qe_lib/usb.c b/arch/powerpc/sysdev/qe_lib/usb.c
new file mode 100644
index 000000000000..8105462078eb
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/usb.c
@@ -0,0 +1,55 @@
+/*
+ * QE USB routines
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+int qe_usb_clock_set(enum qe_clock clk, int rate)
+{
+	struct qe_mux __iomem *mux = &qe_immr->qmx;
+	unsigned long flags;
+	u32 val;
+
+	switch (clk) {
+	case QE_CLK3:  val = QE_CMXGCR_USBCS_CLK3;  break;
+	case QE_CLK5:  val = QE_CMXGCR_USBCS_CLK5;  break;
+	case QE_CLK7:  val = QE_CMXGCR_USBCS_CLK7;  break;
+	case QE_CLK9:  val = QE_CMXGCR_USBCS_CLK9;  break;
+	case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
+	case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
+	case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
+	case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
+	case QE_BRG9:  val = QE_CMXGCR_USBCS_BRG9;  break;
+	case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
+	default:
+		pr_err("%s: requested unknown clock %d\n", __func__, clk);
+		return -EINVAL;
+	}
+
+	if (qe_clock_is_brg(clk))
+		qe_setbrg(clk, rate, 1);
+
+	spin_lock_irqsave(&cmxgcr_lock, flags);
+
+	clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
+
+	spin_unlock_irqrestore(&cmxgcr_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(qe_usb_clock_set);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index ac1a72dc21e5..24e1f5a197ae 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -426,11 +426,10 @@ void __init tsi108_pci_int_init(struct device_node *node)
 {
 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 
-	pci_irq_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LEGACY,
+	pci_irq_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
 				      0, &pci_irq_host_ops, 0);
 	if (pci_irq_host == NULL) {
 		printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n");
-		of_node_put(node);
 		return;
 	}
 
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 625b275c3795..d35405c59434 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -280,12 +280,10 @@ static struct uic * __init uic_init_one(struct device_node *node)
 	}
 	uic->dcrbase = *dcrreg;
 
-	uic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	uic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				      NR_UIC_INTS, &uic_host_ops, -1);
-	if (! uic->irqhost) {
-		of_node_put(node);
+	if (! uic->irqhost)
 		return NULL; /* FIXME: panic? */
-	}
 
 	uic->irqhost->host_data = uic;
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index bfcf70ee8959..34c3d0688fe0 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -54,7 +54,7 @@
 #define skipbl	xmon_skipbl
 
 #ifdef CONFIG_SMP
-cpumask_t cpus_in_xmon = CPU_MASK_NONE;
+static cpumask_t cpus_in_xmon = CPU_MASK_NONE;
 static unsigned long xmon_taken = 1;
 static int xmon_owner;
 static int xmon_gate;
@@ -154,7 +154,7 @@ static int do_spu_cmd(void);
 static void dump_tlb_44x(void);
 #endif
 
-int xmon_no_auto_backtrace;
+static int xmon_no_auto_backtrace;
 
 extern void xmon_enter(void);
 extern void xmon_leave(void);
@@ -327,6 +327,11 @@ static void release_output_lock(void)
 {
 	xmon_speaker = 0;
 }
+
+int cpus_are_in_xmon(void)
+{
+	return !cpus_empty(cpus_in_xmon);
+}
 #endif
 
 static int xmon_core(struct pt_regs *regs, int fromipi)
@@ -593,7 +598,7 @@ static int xmon_iabr_match(struct pt_regs *regs)
 {
 	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
 		return 0;
-	if (iabr == 0)
+	if (iabr == NULL)
 		return 0;
 	xmon_core(regs, 0);
 	return 1;
@@ -1142,7 +1147,7 @@ bpt_cmds(void)
 		} else {
 			/* assume a breakpoint address */
 			bp = at_breakpoint(a);
-			if (bp == 0) {
+			if (bp == NULL) {
 				printf("No breakpoint at %x\n", a);
 				break;
 			}
@@ -1370,7 +1375,7 @@ static void print_bug_trap(struct pt_regs *regs)
 #endif
 }
 
-void excprint(struct pt_regs *fp)
+static void excprint(struct pt_regs *fp)
 {
 	unsigned long trap;
 
@@ -1408,7 +1413,7 @@ void excprint(struct pt_regs *fp)
 		print_bug_trap(fp);
 }
 
-void prregs(struct pt_regs *fp)
+static void prregs(struct pt_regs *fp)
 {
 	int n, trap;
 	unsigned long base;
@@ -1463,7 +1468,7 @@ void prregs(struct pt_regs *fp)
 		printf("dar = "REG"   dsisr = %.8lx\n", fp->dar, fp->dsisr);
 }
 
-void cacheflush(void)
+static void cacheflush(void)
 {
 	int cmd;
 	unsigned long nflush;
@@ -1495,7 +1500,7 @@ void cacheflush(void)
 	catch_memory_errors = 0;
 }
 
-unsigned long
+static unsigned long
 read_spr(int n)
 {
 	unsigned int instrs[2];
@@ -1533,7 +1538,7 @@ read_spr(int n)
 	return ret;
 }
 
-void
+static void
 write_spr(int n, unsigned long val)
 {
 	unsigned int instrs[2];
@@ -1571,7 +1576,7 @@ static unsigned long regno;
 extern char exc_prolog;
 extern char dec_exc;
 
-void super_regs(void)
+static void super_regs(void)
 {
 	int cmd;
 	unsigned long val;
@@ -1629,7 +1634,7 @@ void super_regs(void)
 /*
  * Stuff for reading and writing memory safely
  */
-int
+static int
 mread(unsigned long adrs, void *buf, int size)
 {
 	volatile int n;
@@ -1666,7 +1671,7 @@ mread(unsigned long adrs, void *buf, int size)
 	return n;
 }
 
-int
+static int
 mwrite(unsigned long adrs, void *buf, int size)
 {
 	volatile int n;
@@ -1731,7 +1736,7 @@ static int handle_fault(struct pt_regs *regs)
 
 #define SWAP(a, b, t)	((t) = (a), (a) = (b), (b) = (t))
 
-void
+static void
 byterev(unsigned char *val, int size)
 {
 	int t;
@@ -1793,7 +1798,7 @@ static char *memex_subcmd_help_string =
     "  x        exit this mode\n"
     "";
 
-void
+static void
 memex(void)
 {
 	int cmd, inc, i, nslash;
@@ -1944,7 +1949,7 @@ memex(void)
 	}
 }
 
-int
+static int
 bsesc(void)
 {
 	int c;
@@ -1984,7 +1989,7 @@ static void xmon_rawdump (unsigned long adrs, long ndump)
 #define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
 			 || ('a' <= (c) && (c) <= 'f') \
 			 || ('A' <= (c) && (c) <= 'F'))
-void
+static void
 dump(void)
 {
 	int c;
@@ -2022,7 +2027,7 @@ dump(void)
 	}
 }
 
-void
+static void
 prdump(unsigned long adrs, long ndump)
 {
 	long n, m, c, r, nr;
@@ -2066,7 +2071,7 @@ prdump(unsigned long adrs, long ndump)
 
 typedef int (*instruction_dump_func)(unsigned long inst, unsigned long addr);
 
-int
+static int
 generic_inst_dump(unsigned long adr, long count, int praddr,
 			instruction_dump_func dump_func)
 {
@@ -2104,7 +2109,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr,
 	return adr - first_adr;
 }
 
-int
+static int
 ppc_inst_dump(unsigned long adr, long count, int praddr)
 {
 	return generic_inst_dump(adr, count, praddr, print_insn_powerpc);
@@ -2126,7 +2131,7 @@ static unsigned long mval;		/* byte value to set memory to */
 static unsigned long mcount;		/* # bytes to affect */
 static unsigned long mdiffs;		/* max # differences to print */
 
-void
+static void
 memops(int cmd)
 {
 	scanhex((void *)&mdest);
@@ -2152,7 +2157,7 @@ memops(int cmd)
 	}
 }
 
-void
+static void
 memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
 {
 	unsigned n, prt;
@@ -2170,7 +2175,7 @@ memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
 static unsigned mend;
 static unsigned mask;
 
-void
+static void
 memlocate(void)
 {
 	unsigned a, n;
@@ -2203,7 +2208,7 @@ memlocate(void)
 static unsigned long mskip = 0x1000;
 static unsigned long mlim = 0xffffffff;
 
-void
+static void
 memzcan(void)
 {
 	unsigned char v;
@@ -2230,7 +2235,7 @@ memzcan(void)
 		printf("%.8x\n", a - mskip);
 }
 
-void proccall(void)
+static void proccall(void)
 {
 	unsigned long args[8];
 	unsigned long ret;
@@ -2388,7 +2393,7 @@ scanhex(unsigned long *vp)
 	return 1;
 }
 
-void
+static void
 scannl(void)
 {
 	int c;
@@ -2399,7 +2404,7 @@ scannl(void)
 		c = inchar();
 }
 
-int hexdigit(int c)
+static int hexdigit(int c)
 {
 	if( '0' <= c && c <= '9' )
 		return c - '0';
@@ -2430,13 +2435,13 @@ getstring(char *s, int size)
 static char line[256];
 static char *lineptr;
 
-void
+static void
 flush_input(void)
 {
 	lineptr = NULL;
 }
 
-int
+static int
 inchar(void)
 {
 	if (lineptr == NULL || *lineptr == 0) {
@@ -2449,7 +2454,7 @@ inchar(void)
 	return *lineptr++;
 }
 
-void
+static void
 take_input(char *str)
 {
 	lineptr = str;
@@ -2618,7 +2623,8 @@ static void dump_tlb_44x(void)
 	}
 }
 #endif /* CONFIG_44x */
-void xmon_init(int enable)
+
+static void xmon_init(int enable)
 {
 #ifdef CONFIG_PPC_ISERIES
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
diff --git a/arch/ppc/.gitignore b/arch/ppc/.gitignore
deleted file mode 100644
index 1e79a0ae4473..000000000000
--- a/arch/ppc/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/include
diff --git a/arch/ppc/4xx_io/Makefile b/arch/ppc/4xx_io/Makefile
deleted file mode 100644
index 6a8cd575f382..000000000000
--- a/arch/ppc/4xx_io/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the linux MPC4xx ppc-specific parts
-#
-
-
-obj-$(CONFIG_SERIAL_SICC)		+= serial_sicc.o
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c
deleted file mode 100644
index efa0a56e230b..000000000000
--- a/arch/ppc/4xx_io/serial_sicc.c
+++ /dev/null
@@ -1,2005 +0,0 @@
-/*
- *  Driver for IBM STB3xxx SICC serial port
- *
- *  Based on drivers/char/serial_amba.c, by ARM Ltd.
- *
- *  Copyright 2001 IBM Corp.
- *  Author: IBM China Research Lab
- *            Yudong Yang <yangyud@cn.ibm.com>
- *            Yi Ge       <geyi@cn.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * This is a driver for SICC serial port on IBM Redwood 4 evaluation board.
- * The driver support both as a console device and normal serial device and
- * is compatible with normal ttyS* devices.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/capability.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/serial.h>
-
-
-#include <linux/serialP.h>
-
-
-/* -----------------------------------------------------------------------------
- *  From STB03xxx SICC UART Specification
- * -----------------------------------------------------------------------------
- *  UART Register Offsets.
- */
-
-#define BL_SICC_LSR   0x0000000      /* line status register read/clear */
-#define BL_SICC_LSRS  0x0000001      /* set line status register read/set */
-#define BL_SICC_HSR   0x0000002      /* handshake status register r/clear */
-#define BL_SICC_HSRS  0x0000003      /* set handshake status register r/set */
-#define BL_SICC_BRDH  0x0000004      /* baudrate divisor high reg r/w */
-#define BL_SICC_BRDL  0x0000005      /* baudrate divisor low reg r/w */
-#define BL_SICC_LCR   0x0000006      /* control register r/w */
-#define BL_SICC_RCR   0x0000007      /* receiver command register r/w */
-#define BL_SICC_TxCR  0x0000008      /* transmitter command register r/w */
-#define BL_SICC_RBR   0x0000009      /* receive buffer r */
-#define BL_SICC_TBR   0x0000009      /* transmit buffer w */
-#define BL_SICC_CTL2  0x000000A      /* added for Vesta */
-#define BL_SICC_IrCR  0x000000B      /* added for Vesta IR */
-
-/* masks and definitions for serial port control register */
-
-#define _LCR_LM_MASK  0xc0            /* loop back modes */
-#define _LCR_DTR_MASK 0x20            /* data terminal ready 0-inactive */
-#define _LCR_RTS_MASK 0x10            /* request to send 0-inactive */
-#define _LCR_DB_MASK  0x08            /* data bits mask */
-#define _LCR_PE_MASK  0x04            /* parity enable */
-#define _LCR_PTY_MASK 0x02            /* parity */
-#define _LCR_SB_MASK  0x01            /* stop bit mask */
-
-#define _LCR_LM_NORM  0x00            /* normal operation */
-#define _LCR_LM_LOOP  0x40            /* internal loopback mode */
-#define _LCR_LM_ECHO  0x80            /* automatic echo mode */
-#define _LCR_LM_RES   0xc0            /* reserved */
-
-#define _LCR_DTR_ACTIVE       _LCR_DTR_MASK /* DTR is active */
-#define _LCR_RTS_ACTIVE       _LCR_RTS_MASK /* RTS is active */
-#define _LCR_DB_8_BITS        _LCR_DB_MASK  /*  8 data bits */
-#define _LCR_DB_7_BITS        0x00          /*  7 data bits */
-#define _LCR_PE_ENABLE        _LCR_PE_MASK  /* parity enabled */
-#define _LCR_PE_DISABLE       0x00          /* parity disabled */
-#define _LCR_PTY_EVEN         0x00          /* even parity */
-#define _LCR_PTY_ODD          _LCR_PTY_MASK /* odd parity */
-#define _LCR_SB_1_BIT         0x00          /* one stop bit */
-#define _LCR_SB_2_BIT         _LCR_SB_MASK  /* two stop bit */
-
-/* serial port handshake register */
-
-#define _HSR_DIS_MASK  0x80            /* DSR input inactive error mask */
-#define _HSR_CS_MASK   0x40            /* CTS input inactive error mask */
-#define _HSR_DIS_ACT   0x00            /* dsr input is active */
-#define _HSR_DIS_INACT _HSR_DIS_MASK   /* dsr input is inactive */
-#define _HSR_CS_ACT    0x00            /* cts input is active */
-#define _HSR_CS_INACT  _HSR_CS_MASK    /* cts input is active */
-
-/* serial port line status register */
-
-#define _LSR_RBR_MASK  0x80            /* receive buffer ready mask */
-#define _LSR_FE_MASK   0x40            /* framing error */
-#define _LSR_OE_MASK   0x20            /* overrun error */
-#define _LSR_PE_MASK   0x10            /* parity error */
-#define _LSR_LB_MASK   0x08            /* line break */
-#define _LSR_TBR_MASK  0x04            /* transmit buffer ready */
-#define _LSR_TSR_MASK  0x02            /* transmit shift register ready */
-
-#define _LSR_RBR_FULL  _LSR_RBR_MASK  /* receive buffer is full */
-#define _LSR_FE_ERROR  _LSR_FE_MASK   /* framing error detected */
-#define _LSR_OE_ERROR  _LSR_OE_MASK   /* overrun error detected */
-#define _LSR_PE_ERROR  _LSR_PE_MASK   /* parity error detected */
-#define _LSR_LB_BREAK  _LSR_LB_MASK   /* line break detected */
-#define _LSR_TBR_EMPTY _LSR_TBR_MASK  /* transmit buffer is ready */
-#define _LSR_TSR_EMPTY _LSR_TSR_MASK  /* transmit shift register is empty */
-#define _LSR_TX_ALL    0x06           /* all physical transmit is done */
-
-#define _LSR_RX_ERR    (_LSR_LB_BREAK | _LSR_FE_MASK | _LSR_OE_MASK | \
-			 _LSR_PE_MASK )
-
-/* serial port receiver command register */
-
-#define _RCR_ER_MASK   0x80           /* enable receiver mask */
-#define _RCR_DME_MASK  0x60           /* dma mode */
-#define _RCR_EIE_MASK  0x10           /* error interrupt enable mask */
-#define _RCR_PME_MASK  0x08           /* pause mode mask */
-
-#define _RCR_ER_ENABLE _RCR_ER_MASK   /* receiver enabled */
-#define _RCR_DME_DISABLE 0x00         /* dma disabled */
-#define _RCR_DME_RXRDY 0x20           /* dma disabled, RxRDY interrupt enabled*/
-#define _RCR_DME_ENABLE2 0x40         /* dma enabled,receiver src channel 2 */
-#define _RCR_DME_ENABLE3 0x60         /* dma enabled,receiver src channel 3 */
-#define _RCR_PME_HARD  _RCR_PME_MASK  /* RTS controlled by hardware */
-#define _RCR_PME_SOFT  0x00           /* RTS controlled by software */
-
-/* serial port transmit command register */
-
-#define _TxCR_ET_MASK   0x80           /* transmitter enable mask */
-#define _TxCR_DME_MASK  0x60           /* dma mode mask */
-#define _TxCR_TIE_MASK  0x10           /* empty interrupt enable mask */
-#define _TxCR_EIE_MASK  0x08           /* error interrupt enable mask */
-#define _TxCR_SPE_MASK  0x04           /* stop/pause mask */
-#define _TxCR_TB_MASK   0x02           /* transmit break mask */
-
-#define _TxCR_ET_ENABLE _TxCR_ET_MASK  /* transmitter enabled */
-#define _TxCR_DME_DISABLE 0x00         /* transmitter disabled, TBR intr disabled */
-#define _TxCR_DME_TBR   0x20           /* transmitter disabled, TBR intr enabled */
-#define _TxCR_DME_CHAN_2 0x40          /* dma enabled, destination chann 2 */
-#define _TxCR_DME_CHAN_3 0x60          /* dma enabled, destination chann 3 */
-
-/* serial ctl reg 2 - added for Vesta */
-
-#define _CTL2_EXTERN  0x80            /*  */
-#define _CTL2_USEFIFO 0x40            /*  */
-#define _CTL2_RESETRF 0x08            /*  */
-#define _CTL2_RESETTF 0x04            /*  */
-
-
-
-#define SERIAL_SICC_NAME    "ttySICC"
-#define SERIAL_SICC_MAJOR   150
-#define SERIAL_SICC_MINOR   1
-#define SERIAL_SICC_NR      1
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/*
- * Things needed by tty driver
- */
-static struct tty_driver *siccnormal_driver;
-
-#if defined(CONFIG_SERIAL_SICC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-/*
- * Things needed internally to this driver
- */
-
-/*
- * tmp_buf is used as a temporary buffer by serial_write.  We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static u_char *tmp_buf;
-
-#define HIGH_BITS_OFFSET    ((sizeof(long)-sizeof(int))*8)
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS        256
-#define SICC_ISR_PASS_LIMIT 256
-
-#define EVT_WRITE_WAKEUP    0
-
-struct SICC_icount {
-    __u32   cts;
-    __u32   dsr;
-    __u32   rng;
-    __u32   dcd;
-    __u32   rx;
-    __u32   tx;
-    __u32   frame;
-    __u32   overrun;
-    __u32   parity;
-    __u32   brk;
-    __u32   buf_overrun;
-};
-
-/*
- * Static information about the port
- */
-struct SICC_port {
-    unsigned int        uart_base;
-    unsigned int        uart_base_phys;
-    unsigned int        irqrx;
-    unsigned int        irqtx;
-    unsigned int        uartclk;
-    unsigned int        fifosize;
-    unsigned int        tiocm_support;
-    void (*set_mctrl)(struct SICC_port *, u_int mctrl);
-};
-
-/*
- * This is the state information which is persistent across opens
- */
-struct SICC_state {
-    struct SICC_icount  icount;
-    unsigned int        line;
-    unsigned int        close_delay;
-    unsigned int        closing_wait;
-    unsigned int        custom_divisor;
-    unsigned int        flags;
-    int         count;
-    struct SICC_info    *info;
-    spinlock_t		sicc_lock;
-};
-
-#define SICC_XMIT_SIZE 1024
-/*
- * This is the state information which is only valid when the port is open.
- */
-struct SICC_info {
-    struct SICC_port    *port;
-    struct SICC_state   *state;
-    struct tty_struct   *tty;
-    unsigned char       x_char;
-    unsigned char       old_status;
-    unsigned char       read_status_mask;
-    unsigned char       ignore_status_mask;
-    struct circ_buf     xmit;
-    unsigned int        flags;
-#ifdef SUPPORT_SYSRQ
-    unsigned long       sysrq;
-#endif
-
-    unsigned int        event;
-    unsigned int        timeout;
-    unsigned int        lcr_h;
-    unsigned int        mctrl;
-    int         blocked_open;
-
-    struct tasklet_struct   tlet;
-
-    wait_queue_head_t   open_wait;
-    wait_queue_head_t   close_wait;
-    wait_queue_head_t   delta_msr_wait;
-};
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-static struct console siccuart_cons;
-#endif
-static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios);
-static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout);
-
-
-
-static void powerpcMtcic_cr(unsigned long value)
-{
-    mtdcr(DCRN_CICCR, value);
-}
-
-static unsigned long powerpcMfcic_cr(void)
-{
-    return mfdcr(DCRN_CICCR);
-}
-
-static unsigned long powerpcMfclkgpcr(void)
-{
-    return mfdcr(DCRN_SCCR);
-}
-
-static void sicc_set_mctrl_null(struct SICC_port *port, u_int mctrl)
-{
-}
-
-static struct SICC_port sicc_ports[SERIAL_SICC_NR] = {
-    {
-        .uart_base = 0,
-        .uart_base_phys = SICC0_IO_BASE,
-        .irqrx =    SICC0_INTRX,
-        .irqtx =    SICC0_INTTX,
-//      .uartclk =    0,
-        .fifosize = 1,
-        .set_mctrl = sicc_set_mctrl_null,
-    }
-};
-
-static struct SICC_state sicc_state[SERIAL_SICC_NR];
-
-static void siccuart_enable_rx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_RCR);
-    cr &= ~_RCR_DME_MASK;
-    cr |= _RCR_DME_RXRDY;
-    writeb(cr, info->port->uart_base+BL_SICC_RCR);
-}
-
-static void siccuart_disable_rx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_RCR);
-    cr &= ~_RCR_DME_MASK;
-    cr |=  _RCR_DME_DISABLE;
-    writeb(cr, info->port->uart_base+BL_SICC_RCR);
-}
-
-
-static void siccuart_enable_tx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_TxCR);
-    cr &= ~_TxCR_DME_MASK;
-    cr |= _TxCR_DME_TBR;
-    writeb(cr, info->port->uart_base+BL_SICC_TxCR);
-}
-
-static void siccuart_disable_tx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_TxCR);
-    cr &= ~_TxCR_DME_MASK;
-    cr |=  _TxCR_DME_DISABLE;
-    writeb(cr, info->port->uart_base+BL_SICC_TxCR);
-}
-
-
-static void siccuart_stop(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    /* disable interrupts while stopping serial port interrupts */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    siccuart_disable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static void siccuart_start(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    /* disable interrupts while starting serial port interrupts */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (info->xmit.head != info->xmit.tail
-        && info->xmit.buf)
-        siccuart_enable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver.
- */
-static void siccuart_event(struct SICC_info *info, int event)
-{
-    info->event |= 1 << event;
-    tasklet_schedule(&info->tlet);
-}
-
-static void
-siccuart_rx_chars(struct SICC_info *info)
-{
-    struct tty_struct *tty = info->tty;
-    unsigned int status, ch, rsr, flg, ignored = 0;
-    struct SICC_icount *icount = &info->state->icount;
-    struct SICC_port *port = info->port;
-
-    status = readb(port->uart_base+BL_SICC_LSR );
-    while (status & _LSR_RBR_FULL) {
-        ch = readb(port->uart_base+BL_SICC_RBR);
-
-        if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-            goto ignore_char;
-        icount->rx++;
-
-        flg = TTY_NORMAL;
-
-        /*
-         * Note that the error handling code is
-         * out of the main execution path
-         */
-        rsr = readb(port->uart_base+BL_SICC_LSR);
-        if (rsr & _LSR_RX_ERR)
-            goto handle_error;
-#ifdef SUPPORT_SYSRQ
-        if (info->sysrq) {
-            if (ch && time_before(jiffies, info->sysrq)) {
-                handle_sysrq(ch, NULL);
-                info->sysrq = 0;
-                goto ignore_char;
-            }
-            info->sysrq = 0;
-        }
-#endif
-    error_return:
-        *tty->flip.flag_buf_ptr++ = flg;
-        *tty->flip.char_buf_ptr++ = ch;
-        tty->flip.count++;
-    ignore_char:
-        status = readb(port->uart_base+BL_SICC_LSR );
-    }
-out:
-    tty_flip_buffer_push(tty);
-    return;
-
-handle_error:
-    if (rsr & _LSR_LB_BREAK) {
-        rsr &= ~(_LSR_FE_MASK | _LSR_PE_MASK);
-        icount->brk++;
-
-#ifdef SUPPORT_SYSRQ
-        if (info->state->line == siccuart_cons.index) {
-            if (!info->sysrq) {
-                info->sysrq = jiffies + HZ*5;
-                goto ignore_char;
-            }
-        }
-#endif
-    } else if (rsr & _LSR_PE_MASK)
-        icount->parity++;
-    else if (rsr & _LSR_FE_MASK)
-        icount->frame++;
-    if (rsr & _LSR_OE_MASK)
-        icount->overrun++;
-
-    if (rsr & info->ignore_status_mask) {
-        if (++ignored > 100)
-            goto out;
-        goto ignore_char;
-    }
-    rsr &= info->read_status_mask;
-
-    if (rsr & _LSR_LB_BREAK)
-        flg = TTY_BREAK;
-    else if (rsr &  _LSR_PE_MASK)
-        flg = TTY_PARITY;
-    else if (rsr &  _LSR_FE_MASK)
-        flg = TTY_FRAME;
-
-    if (rsr &  _LSR_OE_MASK) {
-        /*
-         * CHECK: does overrun affect the current character?
-         * ASSUMPTION: it does not.
-         */
-        *tty->flip.flag_buf_ptr++ = flg;
-        *tty->flip.char_buf_ptr++ = ch;
-        tty->flip.count++;
-        if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-            goto ignore_char;
-        ch = 0;
-        flg = TTY_OVERRUN;
-    }
-#ifdef SUPPORT_SYSRQ
-    info->sysrq = 0;
-#endif
-    goto error_return;
-}
-
-static void siccuart_tx_chars(struct SICC_info *info)
-{
-    struct SICC_port *port = info->port;
-    int count;
-        unsigned char status;
-
-
-    if (info->x_char) {
-        writeb(info->x_char, port->uart_base+ BL_SICC_TBR);
-        info->state->icount.tx++;
-        info->x_char = 0;
-        return;
-    }
-    if (info->xmit.head == info->xmit.tail
-        || info->tty->stopped
-        || info->tty->hw_stopped) {
-        siccuart_disable_tx_interrupt(info);
-                writeb(status&(~_LSR_RBR_MASK),port->uart_base+BL_SICC_LSR);
-        return;
-    }
-
-    count = port->fifosize;
-    do {
-        writeb(info->xmit.buf[info->xmit.tail], port->uart_base+ BL_SICC_TBR);
-        info->xmit.tail = (info->xmit.tail + 1) & (SICC_XMIT_SIZE - 1);
-        info->state->icount.tx++;
-        if (info->xmit.head == info->xmit.tail)
-            break;
-    } while (--count > 0);
-
-    if (CIRC_CNT(info->xmit.head,
-             info->xmit.tail,
-             SICC_XMIT_SIZE) < WAKEUP_CHARS)
-        siccuart_event(info, EVT_WRITE_WAKEUP);
-
-    if (info->xmit.head == info->xmit.tail) {
-        siccuart_disable_tx_interrupt(info);
-    }
-}
-
-
-static irqreturn_t siccuart_int_rx(int irq, void *dev_id)
-{
-    struct SICC_info *info = dev_id;
-    siccuart_rx_chars(info)
-    return IRQ_HANDLED;
-}
-
-
-static irqreturn_t siccuart_int_tx(int irq, void *dev_id)
-{
-    struct SICC_info *info = dev_id;
-    siccuart_tx_chars(info);
-    return IRQ_HANDLED;
-}
-
-static void siccuart_tasklet_action(unsigned long data)
-{
-    struct SICC_info *info = (struct SICC_info *)data;
-    struct tty_struct *tty;
-
-    tty = info->tty;
-    if (!tty || !test_and_clear_bit(EVT_WRITE_WAKEUP, &info->event))
-        return;
-
-    if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-        tty->ldisc.write_wakeup)
-        (tty->ldisc.write_wakeup)(tty);
-    wake_up_interruptible(&tty->write_wait);
-}
-
-static int siccuart_startup(struct SICC_info *info)
-{
-    unsigned long flags;
-    unsigned long page;
-    int retval = 0;
-
-    if (info->flags & ASYNC_INITIALIZED) {
-        return 0;
-    }
-
-    page = get_zeroed_page(GFP_KERNEL);
-    if (!page)
-        return -ENOMEM;
-
-    if (info->port->uart_base == 0)
-	info->port->uart_base = (int)ioremap(info->port->uart_base_phys, PAGE_SIZE);
-    if (info->port->uart_base == 0) {
-	free_page(page);
-	return -ENOMEM;
-    }
-
-    /* lock access to info while doing setup */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-
-    if (info->xmit.buf)
-        free_page(page);
-    else
-        info->xmit.buf = (unsigned char *) page;
-
-
-    info->mctrl = 0;
-    if (info->tty->termios->c_cflag & CBAUD)
-        info->mctrl = TIOCM_RTS | TIOCM_DTR;
-    info->port->set_mctrl(info->port, info->mctrl);
-
-    /*
-     * initialise the old status of the modem signals
-     */
-    info->old_status = 0; // UART_GET_FR(info->port) & AMBA_UARTFR_MODEM_ANY;
-
-
-    if (info->tty)
-        clear_bit(TTY_IO_ERROR, &info->tty->flags);
-    info->xmit.head = info->xmit.tail = 0;
-
-    /*
-     * Set up the tty->alt_speed kludge
-     */
-    if (info->tty) {
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-            info->tty->alt_speed = 57600;
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-            info->tty->alt_speed = 115200;
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-            info->tty->alt_speed = 230400;
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-            info->tty->alt_speed = 460800;
-    }
-
-
-    writeb( 0x00, info->port->uart_base + BL_SICC_IrCR );  // disable IrDA
-
-
-    /*
-     * and set the speed of the serial port
-     */
-    siccuart_change_speed(info, 0);
-
-    // enable rx/tx ports
-    writeb(_RCR_ER_ENABLE /*| _RCR_PME_HARD*/, info->port->uart_base + BL_SICC_RCR);
-    writeb(_TxCR_ET_ENABLE               , info->port->uart_base + BL_SICC_TxCR);
-
-    readb(info->port->uart_base + BL_SICC_RBR); // clear rx port
-
-    writeb(0xf8, info->port->uart_base + BL_SICC_LSR);   /* reset bits 0-4 of LSR */
-
-    /*
-     * Finally, enable interrupts
-     */
-
-     /*
-     * Allocate the IRQ
-     */
-        retval = request_irq(info->port->irqrx, siccuart_int_rx, 0, "SICC rx", info);
-        if (retval) {
-             if (capable(CAP_SYS_ADMIN)) {
-                   if (info->tty)
-                          set_bit(TTY_IO_ERROR, &info->tty->flags);
-                   retval = 0;
-             }
-              goto errout;
-         }
-    retval = request_irq(info->port->irqtx, siccuart_int_tx, 0, "SICC tx", info);
-    if (retval) {
-        if (capable(CAP_SYS_ADMIN)) {
-            if (info->tty)
-                set_bit(TTY_IO_ERROR, &info->tty->flags);
-            retval = 0;
-        }
-        free_irq(info->port->irqrx, info);
-        goto errout;
-    }
-
-    siccuart_enable_rx_interrupt(info);
-
-    info->flags |= ASYNC_INITIALIZED;
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return 0;
-
-
-errout:
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return retval;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void siccuart_shutdown(struct SICC_info *info)
-{
-    unsigned long flags;
-
-    if (!(info->flags & ASYNC_INITIALIZED))
-        return;
-
-    /* lock while shutting down port */
-    spin_lock_irqsave(&info->state->sicc_lock,flags); /* Disable interrupts */
-
-    /*
-     * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
-     * here so the queue might never be woken up
-     */
-    wake_up_interruptible(&info->delta_msr_wait);
-
-    /*
-     * disable all interrupts, disable the port
-     */
-    siccuart_disable_rx_interrupt(info);
-    siccuart_disable_tx_interrupt(info);
-
-    /*
-     * Free the IRQ
-     */
-    free_irq(info->port->irqtx, info);
-    free_irq(info->port->irqrx, info);
-
-    if (info->xmit.buf) {
-        unsigned long pg = (unsigned long) info->xmit.buf;
-        info->xmit.buf = NULL;
-        free_page(pg);
-    }
-
-
-    if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
-        info->mctrl &= ~(TIOCM_DTR|TIOCM_RTS);
-    info->port->set_mctrl(info->port, info->mctrl);
-
-    /* kill off our tasklet */
-    tasklet_kill(&info->tlet);
-    if (info->tty)
-        set_bit(TTY_IO_ERROR, &info->tty->flags);
-
-    info->flags &= ~ASYNC_INITIALIZED;
-
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-
-static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios)
-{
-    unsigned int lcr_h, baud, quot, cflag, old_rcr, old_tcr, bits;
-    unsigned long flags;
-
-    if (!info->tty || !info->tty->termios)
-        return;
-
-    cflag = info->tty->termios->c_cflag;
-
-    pr_debug("siccuart_set_cflag(0x%x) called\n", cflag);
-    /* byte size and parity */
-    switch (cflag & CSIZE) {
-    case CS7: lcr_h =   _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; bits = 9;  break;
-    default:  lcr_h =   _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; bits = 10; break; // CS8
-    }
-    if (cflag & CSTOPB) {
-        lcr_h |= _LCR_SB_2_BIT;
-        bits ++;
-    }
-    if (cflag & PARENB) {
-        lcr_h |=  _LCR_PE_ENABLE;
-        bits++;
-        if (!(cflag & PARODD))
-            lcr_h |=  _LCR_PTY_ODD;
-        else
-            lcr_h |=  _LCR_PTY_EVEN;
-    }
-
-    do {
-        /* Determine divisor based on baud rate */
-        baud = tty_get_baud_rate(info->tty);
-        if (!baud)
-            baud = 9600;
-
-
-        {
-           // here is ppc403SetBaud(com_port, baud);
-           unsigned long divisor, clockSource, temp;
-
-           /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
-           powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
-
-           /* Determine Internal Baud Clock Frequency */
-           /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
-           /* SCCR (Serial Clock Control Register) on Vesta */
-           temp = powerpcMfclkgpcr();
-
-           if(temp & 0x00000080) {
-               clockSource = 324000000;
-           }
-           else {
-               clockSource = 216000000;
-           }
-           clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
-           divisor = clockSource/(16*baud) - 1;
-           /* divisor has only 12 bits of resolution */
-           if(divisor>0x00000FFF){
-               divisor=0x00000FFF;
-           }
-
-           quot = divisor;
-        }
-
-        if (baud == 38400 &&
-            ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
-            quot = info->state->custom_divisor;
-
-        if (!quot && old_termios) {
-            info->tty->termios->c_cflag &= ~CBAUD;
-            info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
-            old_termios = NULL;
-        }
-    } while (quot == 0 && old_termios);
-
-    /* As a last resort, if the quotient is zero, default to 9600 bps */
-    if (!quot)
-        quot = (info->port->uartclk / (16 * 9600)) - 1;
-
-    info->timeout = info->port->fifosize * HZ * bits / baud;
-    info->timeout += HZ/50;     /* Add .02 seconds of slop */
-
-    if (cflag & CRTSCTS)
-        info->flags |= ASYNC_CTS_FLOW;
-    else
-        info->flags &= ~ASYNC_CTS_FLOW;
-    if (cflag & CLOCAL)
-        info->flags &= ~ASYNC_CHECK_CD;
-    else
-        info->flags |= ASYNC_CHECK_CD;
-
-    /*
-     * Set up parity check flag
-     */
-#define RELEVENT_IFLAG(iflag)   ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-    info->read_status_mask = _LSR_OE_MASK;
-    if (I_INPCK(info->tty))
-        info->read_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
-    if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
-        info->read_status_mask |= _LSR_LB_MASK;
-
-    /*
-     * Characters to ignore
-     */
-    info->ignore_status_mask = 0;
-    if (I_IGNPAR(info->tty))
-        info->ignore_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
-    if (I_IGNBRK(info->tty)) {
-        info->ignore_status_mask |=  _LSR_LB_MASK;
-        /*
-         * If we're ignoring parity and break indicators,
-         * ignore overruns to (for real raw support).
-         */
-        if (I_IGNPAR(info->tty))
-            info->ignore_status_mask |=  _LSR_OE_MASK;
-    }
-
-    /* disable interrupts while reading and clearing registers */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-
-    old_rcr = readb(info->port->uart_base + BL_SICC_RCR);
-    old_tcr = readb(info->port->uart_base + BL_SICC_TxCR);
-
-
-    writeb(0, info->port->uart_base + BL_SICC_RCR);
-    writeb(0, info->port->uart_base + BL_SICC_TxCR);
-
-    /*RLBtrace (&ppc403Chan0, 0x2000000c, 0, 0);*/
-
-
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-
-
-    /* Set baud rate */
-    writeb((quot & 0x00000F00)>>8, info->port->uart_base + BL_SICC_BRDH );
-    writeb( quot & 0x00000FF,      info->port->uart_base + BL_SICC_BRDL );
-
-    /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
-    /* For now, do NOT use FIFOs since 403 UART did not have this    */
-    /* capability and this driver was inherited from 403UART.        */
-    writeb(_CTL2_EXTERN, info->port->uart_base + BL_SICC_CTL2);
-
-    writeb(lcr_h, info->port->uart_base + BL_SICC_LCR);
-
-    writeb(old_rcr, info->port->uart_base + BL_SICC_RCR);  // restore rcr
-    writeb(old_tcr, info->port->uart_base + BL_SICC_TxCR); // restore txcr
-
-}
-
-
-static void siccuart_put_char(struct tty_struct *tty, u_char ch)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    if (!tty || !info->xmit.buf)
-        return;
-
-    /* lock info->xmit while adding character to tx buffer */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE) != 0) {
-        info->xmit.buf[info->xmit.head] = ch;
-        info->xmit.head = (info->xmit.head + 1) & (SICC_XMIT_SIZE - 1);
-    }
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static void siccuart_flush_chars(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    if (info->xmit.head == info->xmit.tail
-        || tty->stopped
-        || tty->hw_stopped
-        || !info->xmit.buf)
-        return;
-
-    /* disable interrupts while transmitting characters */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    siccuart_enable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static int siccuart_write(struct tty_struct *tty,
-              const u_char * buf, int count)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-    int c, ret = 0;
-
-    if (!tty || !info->xmit.buf || !tmp_buf)
-        return 0;
-
-    /* lock info->xmit while removing characters from buffer */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    while (1) {
-        c = CIRC_SPACE_TO_END(info->xmit.head,
-                      info->xmit.tail,
-                      SICC_XMIT_SIZE);
-        if (count < c)
-            c = count;
-        if (c <= 0)
-            break;
-        memcpy(info->xmit.buf + info->xmit.head, buf, c);
-        info->xmit.head = (info->xmit.head + c) &
-                  (SICC_XMIT_SIZE - 1);
-        buf += c;
-        count -= c;
-        ret += c;
-    }
-    if (info->xmit.head != info->xmit.tail
-        && !tty->stopped
-        && !tty->hw_stopped)
-        siccuart_enable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return ret;
-}
-
-static int siccuart_write_room(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-
-    return CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
-}
-
-static int siccuart_chars_in_buffer(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-
-    return CIRC_CNT(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
-}
-
-static void siccuart_flush_buffer(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    pr_debug("siccuart_flush_buffer(%d) called\n", tty->index);
-    /* lock info->xmit while zeroing buffer counts */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    info->xmit.head = info->xmit.tail = 0;
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    wake_up_interruptible(&tty->write_wait);
-    if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-        tty->ldisc.write_wakeup)
-        (tty->ldisc.write_wakeup)(tty);
-}
-
-/*
- * This function is used to send a high-priority XON/XOFF character to
- * the device
- */
-static void siccuart_send_xchar(struct tty_struct *tty, char ch)
-{
-    struct SICC_info *info = tty->driver_data;
-
-    info->x_char = ch;
-    if (ch)
-       siccuart_enable_tx_interrupt(info);
-}
-
-static void siccuart_throttle(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    if (I_IXOFF(tty))
-        siccuart_send_xchar(tty, STOP_CHAR(tty));
-
-    if (tty->termios->c_cflag & CRTSCTS) {
-        /* disable interrupts while setting modem control lines */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl &= ~TIOCM_RTS;
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-}
-
-static void siccuart_unthrottle(struct tty_struct *tty)
-{
-    struct SICC_info *info = (struct SICC_info *) tty->driver_data;
-    unsigned long flags;
-
-    if (I_IXOFF(tty)) {
-        if (info->x_char)
-            info->x_char = 0;
-        else
-            siccuart_send_xchar(tty, START_CHAR(tty));
-    }
-
-    if (tty->termios->c_cflag & CRTSCTS) {
-        /* disable interrupts while setting modem control lines */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl |= TIOCM_RTS;
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-}
-
-static int get_serial_info(struct SICC_info *info, struct serial_struct *retinfo)
-{
-    struct SICC_state *state = info->state;
-    struct SICC_port *port = info->port;
-    struct serial_struct tmp;
-
-    memset(&tmp, 0, sizeof(tmp));
-    tmp.type       = 0;
-    tmp.line       = state->line;
-    tmp.port       = port->uart_base;
-    if (HIGH_BITS_OFFSET)
-        tmp.port_high = port->uart_base >> HIGH_BITS_OFFSET;
-    tmp.irq        = port->irqrx;
-    tmp.flags      = 0;
-    tmp.xmit_fifo_size = port->fifosize;
-    tmp.baud_base      = port->uartclk / 16;
-    tmp.close_delay    = state->close_delay;
-    tmp.closing_wait   = state->closing_wait;
-    tmp.custom_divisor = state->custom_divisor;
-
-    if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-        return -EFAULT;
-    return 0;
-}
-
-static int set_serial_info(struct SICC_info *info,
-               struct serial_struct *newinfo)
-{
-    struct serial_struct new_serial;
-    struct SICC_state *state, old_state;
-    struct SICC_port *port;
-    unsigned long new_port;
-    unsigned int i, change_irq, change_port;
-    int retval = 0;
-
-    if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
-        return -EFAULT;
-
-    state = info->state;
-    old_state = *state;
-    port = info->port;
-
-    new_port = new_serial.port;
-    if (HIGH_BITS_OFFSET)
-        new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
-
-    change_irq  = new_serial.irq != port->irqrx;
-    change_port = new_port != port->uart_base;
-
-    if (!capable(CAP_SYS_ADMIN)) {
-        if (change_irq || change_port ||
-            (new_serial.baud_base != port->uartclk / 16) ||
-            (new_serial.close_delay != state->close_delay) ||
-            (new_serial.xmit_fifo_size != port->fifosize) ||
-            ((new_serial.flags & ~ASYNC_USR_MASK) !=
-             (state->flags & ~ASYNC_USR_MASK)))
-            return -EPERM;
-        state->flags = ((state->flags & ~ASYNC_USR_MASK) |
-                (new_serial.flags & ASYNC_USR_MASK));
-        info->flags = ((info->flags & ~ASYNC_USR_MASK) |
-                   (new_serial.flags & ASYNC_USR_MASK));
-        state->custom_divisor = new_serial.custom_divisor;
-        goto check_and_exit;
-    }
-
-    if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
-        (new_serial.baud_base < 9600))
-        return -EINVAL;
-
-    if (new_serial.type && change_port) {
-        for (i = 0; i < SERIAL_SICC_NR; i++)
-            if ((port != sicc_ports + i) &&
-                sicc_ports[i].uart_base != new_port)
-                return -EADDRINUSE;
-    }
-
-    if ((change_port || change_irq) && (state->count > 1))
-        return -EBUSY;
-
-    /*
-     * OK, past this point, all the error checking has been done.
-     * At this point, we start making changes.....
-     */
-    port->uartclk = new_serial.baud_base * 16;
-    state->flags = ((state->flags & ~ASYNC_FLAGS) |
-            (new_serial.flags & ASYNC_FLAGS));
-    info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
-               (info->flags & ASYNC_INTERNAL_FLAGS));
-    state->custom_divisor = new_serial.custom_divisor;
-    state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay);
-    state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait);
-    info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-    port->fifosize = new_serial.xmit_fifo_size;
-
-    if (change_port || change_irq) {
-        /*
-         * We need to shutdown the serial port at the old
-         * port/irq combination.
-         */
-        siccuart_shutdown(info);
-        port->irqrx = new_serial.irq;
-        port->uart_base = new_port;
-    }
-
-check_and_exit:
-    if (!port->uart_base)
-        return 0;
-    if (info->flags & ASYNC_INITIALIZED) {
-        if ((old_state.flags & ASYNC_SPD_MASK) !=
-            (state->flags & ASYNC_SPD_MASK) ||
-            (old_state.custom_divisor != state->custom_divisor)) {
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-                info->tty->alt_speed = 57600;
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-                info->tty->alt_speed = 115200;
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-                info->tty->alt_speed = 230400;
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-                info->tty->alt_speed = 460800;
-            siccuart_change_speed(info, NULL);
-        }
-    } else
-        retval = siccuart_startup(info);
-    return retval;
-}
-
-
-/*
- * get_lsr_info - get line status register info
- */
-static int get_lsr_info(struct SICC_info *info, unsigned int *value)
-{
-    unsigned int result, status;
-    unsigned long flags;
-
-    /* disable interrupts while reading status from port */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    status = readb(info->port->uart_base +  BL_SICC_LSR);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    result = status & _LSR_TSR_EMPTY ? TIOCSER_TEMT : 0;
-
-    /*
-     * If we're about to load something into the transmit
-     * register, we'll pretend the transmitter isn't empty to
-     * avoid a race condition (depending on when the transmit
-     * interrupt happens).
-     */
-    if (info->x_char ||
-        ((CIRC_CNT(info->xmit.head, info->xmit.tail,
-               SICC_XMIT_SIZE) > 0) &&
-         !info->tty->stopped && !info->tty->hw_stopped))
-        result &= TIOCSER_TEMT;
-
-    return put_user(result, value);
-}
-
-static int get_modem_info(struct SICC_info *info, unsigned int *value)
-{
-    unsigned int result = info->mctrl;
-
-    return put_user(result, value);
-}
-
-static int set_modem_info(struct SICC_info *info, unsigned int cmd,
-              unsigned int *value)
-{
-    unsigned int arg, old;
-    unsigned long flags;
-
-    if (get_user(arg, value))
-        return -EFAULT;
-
-    old = info->mctrl;
-    switch (cmd) {
-    case TIOCMBIS:
-        info->mctrl |= arg;
-        break;
-
-    case TIOCMBIC:
-        info->mctrl &= ~arg;
-        break;
-
-    case TIOCMSET:
-        info->mctrl = arg;
-        break;
-
-    default:
-        return -EINVAL;
-    }
-    /* disable interrupts while setting modem control lines */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (old != info->mctrl)
-        info->port->set_mctrl(info->port, info->mctrl);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return 0;
-}
-
-static void siccuart_break_ctl(struct tty_struct *tty, int break_state)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-    unsigned int lcr_h;
-
-
-    /* disable interrupts while setting break state */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    lcr_h = readb(info->port + BL_SICC_LSR);
-    if (break_state == -1)
-        lcr_h |=  _LSR_LB_MASK;
-    else
-        lcr_h &= ~_LSR_LB_MASK;
-    writeb(lcr_h, info->port + BL_SICC_LSRS);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static int siccuart_ioctl(struct tty_struct *tty, struct file *file,
-               unsigned int cmd, unsigned long arg)
-{
-    struct SICC_info *info = tty->driver_data;
-    struct SICC_icount cnow;
-    struct serial_icounter_struct icount;
-    unsigned long flags;
-
-    if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-        (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
-        (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
-        if (tty->flags & (1 << TTY_IO_ERROR))
-            return -EIO;
-    }
-
-    switch (cmd) {
-        case TIOCMGET:
-            return get_modem_info(info, (unsigned int *)arg);
-        case TIOCMBIS:
-        case TIOCMBIC:
-        case TIOCMSET:
-            return set_modem_info(info, cmd, (unsigned int *)arg);
-        case TIOCGSERIAL:
-            return get_serial_info(info,
-                           (struct serial_struct *)arg);
-        case TIOCSSERIAL:
-            return set_serial_info(info,
-                           (struct serial_struct *)arg);
-        case TIOCSERGETLSR: /* Get line status register */
-            return get_lsr_info(info, (unsigned int *)arg);
-        /*
-         * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-         * - mask passed in arg for lines of interest
-         *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-         * Caller should use TIOCGICOUNT to see which one it was
-         */
-        case TIOCMIWAIT:
-            return 0;
-        /*
-         * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-         * Return: write counters to the user passed counter struct
-         * NB: both 1->0 and 0->1 transitions are counted except for
-         *     RI where only 0->1 is counted.
-         */
-        case TIOCGICOUNT:
-            /* disable interrupts while getting interrupt count */
-            spin_lock_irqsave(&info->state->sicc_lock,flags);
-            cnow = info->state->icount;
-            spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-            icount.cts = cnow.cts;
-            icount.dsr = cnow.dsr;
-            icount.rng = cnow.rng;
-            icount.dcd = cnow.dcd;
-            icount.rx  = cnow.rx;
-            icount.tx  = cnow.tx;
-            icount.frame = cnow.frame;
-            icount.overrun = cnow.overrun;
-            icount.parity = cnow.parity;
-            icount.brk = cnow.brk;
-            icount.buf_overrun = cnow.buf_overrun;
-
-            return copy_to_user((void *)arg, &icount, sizeof(icount))
-                    ? -EFAULT : 0;
-
-        default:
-            return -ENOIOCTLCMD;
-    }
-    return 0;
-}
-
-static void siccuart_set_termios(struct tty_struct *tty, struct termios *old_termios)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-    unsigned int cflag = tty->termios->c_cflag;
-
-    if ((cflag ^ old_termios->c_cflag) == 0 &&
-        RELEVENT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
-        return;
-
-    siccuart_change_speed(info, old_termios);
-
-    /* Handle transition to B0 status */
-    if ((old_termios->c_cflag & CBAUD) &&
-        !(cflag & CBAUD)) {
-        /* disable interrupts while setting break state */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl &= ~(TIOCM_RTS | TIOCM_DTR);
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-
-    /* Handle transition away from B0 status */
-    if (!(old_termios->c_cflag & CBAUD) &&
-        (cflag & CBAUD)) {
-        /* disable interrupts while setting break state */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl |= TIOCM_DTR;
-        if (!(cflag & CRTSCTS) ||
-            !test_bit(TTY_THROTTLED, &tty->flags))
-            info->mctrl |= TIOCM_RTS;
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-
-    /* Handle turning off CRTSCTS */
-    if ((old_termios->c_cflag & CRTSCTS) &&
-        !(cflag & CRTSCTS)) {
-        tty->hw_stopped = 0;
-        siccuart_start(tty);
-    }
-
-#if 0
-    /*
-     * No need to wake up processes in open wait, since they
-     * sample the CLOCAL flag once, and don't recheck it.
-     * XXX  It's not clear whether the current behavior is correct
-     * or not.  Hence, this may change.....
-     */
-    if (!(old_termios->c_cflag & CLOCAL) &&
-        (tty->termios->c_cflag & CLOCAL))
-        wake_up_interruptible(&info->open_wait);
-#endif
-}
-
-static void siccuart_close(struct tty_struct *tty, struct file *filp)
-{
-    struct SICC_info *info = tty->driver_data;
-    struct SICC_state *state;
-    unsigned long flags;
-
-    if (!info)
-        return;
-
-    state = info->state;
-
-    //pr_debug("siccuart_close() called\n");
-
-    /* lock tty->driver_data while closing port */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-
-    if (tty_hung_up_p(filp)) {
-        goto quick_close;
-    }
-
-    if ((tty->count == 1) && (state->count != 1)) {
-        /*
-         * Uh, oh.  tty->count is 1, which means that the tty
-         * structure will be freed.  state->count should always
-         * be one in these conditions.  If it's greater than
-         * one, we've got real problems, since it means the
-         * serial port won't be shutdown.
-         */
-        printk("siccuart_close: bad serial port count; tty->count is 1, state->count is %d\n", state->count);
-        state->count = 1;
-    }
-    if (--state->count < 0) {
-        printk("rs_close: bad serial port count for %s: %d\n", tty->name, state->count);
-        state->count = 0;
-    }
-    if (state->count) {
-        goto quick_close;
-    }
-    info->flags |= ASYNC_CLOSING;
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    /*
-     * Now we wait for the transmit buffer to clear; and we notify
-     * the line discipline to only process XON/XOFF characters.
-     */
-    tty->closing = 1;
-    if (info->state->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-        tty_wait_until_sent(tty, info->state->closing_wait);
-    /*
-     * At this point, we stop accepting input.  To do this, we
-     * disable the receive line status interrupts.
-     */
-    if (info->flags & ASYNC_INITIALIZED) {
-        siccuart_disable_rx_interrupt(info);
-        /*
-         * Before we drop DTR, make sure the UART transmitter
-         * has completely drained; this is especially
-         * important if there is a transmit FIFO!
-         */
-        siccuart_wait_until_sent(tty, info->timeout);
-    }
-    siccuart_shutdown(info);
-    if (tty->driver->flush_buffer)
-        tty->driver->flush_buffer(tty);
-    if (tty->ldisc.flush_buffer)
-        tty->ldisc.flush_buffer(tty);
-    tty->closing = 0;
-    info->event = 0;
-    info->tty = NULL;
-    if (info->blocked_open) {
-        if (info->state->close_delay)
-            schedule_timeout_interruptible(info->state->close_delay);
-        wake_up_interruptible(&info->open_wait);
-    }
-    info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-    wake_up_interruptible(&info->close_wait);
-    return;
-
-quick_close:
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return;
-}
-
-static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-    struct SICC_info *info = (struct SICC_info *) tty->driver_data;
-    unsigned long char_time, expire;
-
-    if (info->port->fifosize == 0)
-        return;
-
-    /*
-     * Set the check interval to be 1/5 of the estimated time to
-     * send a single character, and make it at least 1.  The check
-     * interval should also be less than the timeout.
-     *
-     * Note: we have to use pretty tight timings here to satisfy
-     * the NIST-PCTS.
-     */
-    char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize;
-    char_time = char_time / 5;
-    if (char_time == 0)
-        char_time = 1;
-
-    // Crazy!!   sometimes the input arg 'timeout' can be negtive numbers  :-(
-    if (timeout >= 0 && timeout < char_time)
-        char_time = timeout;
-    /*
-     * If the transmitter hasn't cleared in twice the approximate
-     * amount of time to send the entire FIFO, it probably won't
-     * ever clear.  This assumes the UART isn't doing flow
-     * control, which is currently the case.  Hence, if it ever
-     * takes longer than info->timeout, this is probably due to a
-     * UART bug of some kind.  So, we clamp the timeout parameter at
-     * 2*info->timeout.
-     */
-    if (!timeout || timeout > 2 * info->timeout)
-        timeout = 2 * info->timeout;
-
-    expire = jiffies + timeout;
-    pr_debug("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu  char_time=%lu...\n",
-           tty->index, jiffies,
-           expire, char_time);
-    while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) {
-        schedule_timeout_interruptible(char_time);
-        if (signal_pending(current))
-            break;
-        if (timeout && time_after(jiffies, expire))
-            break;
-    }
-    set_current_state(TASK_RUNNING);
-}
-
-static void siccuart_hangup(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    struct SICC_state *state = info->state;
-
-    siccuart_flush_buffer(tty);
-    if (info->flags & ASYNC_CLOSING)
-        return;
-    siccuart_shutdown(info);
-    info->event = 0;
-    state->count = 0;
-    info->flags &= ~ASYNC_NORMAL_ACTIVE;
-    info->tty = NULL;
-    wake_up_interruptible(&info->open_wait);
-}
-
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
-               struct SICC_info *info)
-{
-    DECLARE_WAITQUEUE(wait, current);
-    struct SICC_state *state = info->state;
-    unsigned long flags;
-    int do_clocal = 0, extra_count = 0, retval;
-
-    /*
-     * If the device is in the middle of being closed, then block
-     * until it's done, and then try again.
-     */
-    if (tty_hung_up_p(filp) ||
-        (info->flags & ASYNC_CLOSING)) {
-        if (info->flags & ASYNC_CLOSING)
-            interruptible_sleep_on(&info->close_wait);
-        return (info->flags & ASYNC_HUP_NOTIFY) ?
-            -EAGAIN : -ERESTARTSYS;
-    }
-
-    /*
-     * If non-blocking mode is set, or the port is not enabled,
-     * then make the check up front and then exit.
-     */
-    if ((filp->f_flags & O_NONBLOCK) ||
-        (tty->flags & (1 << TTY_IO_ERROR))) {
-        info->flags |= ASYNC_NORMAL_ACTIVE;
-        return 0;
-    }
-
-    if (tty->termios->c_cflag & CLOCAL)
-	do_clocal = 1;
-
-    /*
-     * Block waiting for the carrier detect and the line to become
-     * free (i.e., not in use by the callout).  While we are in
-     * this loop, state->count is dropped by one, so that
-     * rs_close() knows when to free things.  We restore it upon
-     * exit, either normal or abnormal.
-     */
-    retval = 0;
-    add_wait_queue(&info->open_wait, &wait);
-    /* lock while decrementing state->count */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (!tty_hung_up_p(filp)) {
-        extra_count = 1;
-        state->count--;
-    }
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    info->blocked_open++;
-    while (1) {
-        /* disable interrupts while setting modem control lines */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        if (tty->termios->c_cflag & CBAUD) {
-            info->mctrl = TIOCM_DTR | TIOCM_RTS;
-            info->port->set_mctrl(info->port, info->mctrl);
-        }
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-        set_current_state(TASK_INTERRUPTIBLE);
-        if (tty_hung_up_p(filp) ||
-            !(info->flags & ASYNC_INITIALIZED)) {
-            if (info->flags & ASYNC_HUP_NOTIFY)
-                retval = -EAGAIN;
-            else
-                retval = -ERESTARTSYS;
-            break;
-        }
-        if (!(info->flags & ASYNC_CLOSING) &&
-            (do_clocal /*|| (UART_GET_FR(info->port) & SICC_UARTFR_DCD)*/))
-            break;
-        if (signal_pending(current)) {
-            retval = -ERESTARTSYS;
-            break;
-        }
-        schedule();
-    }
-    set_current_state(TASK_RUNNING);
-    remove_wait_queue(&info->open_wait, &wait);
-    if (extra_count)
-        state->count++;
-    info->blocked_open--;
-    if (retval)
-        return retval;
-    info->flags |= ASYNC_NORMAL_ACTIVE;
-    return 0;
-}
-
-static struct SICC_info *siccuart_get(int line)
-{
-    struct SICC_info *info;
-    struct SICC_state *state = sicc_state + line;
-
-    state->count++;
-    if (state->info)
-        return state->info;
-    info = kzalloc(sizeof(struct SICC_info), GFP_KERNEL);
-    if (info) {
-        init_waitqueue_head(&info->open_wait);
-        init_waitqueue_head(&info->close_wait);
-        init_waitqueue_head(&info->delta_msr_wait);
-        info->flags = state->flags;
-        info->state = state;
-        info->port  = sicc_ports + line;
-        tasklet_init(&info->tlet, siccuart_tasklet_action,
-                 (unsigned long)info);
-    }
-    if (state->info) {
-        kfree(info);
-        return state->info;
-    }
-    state->info = info;
-    return info;
-}
-
-static int siccuart_open(struct tty_struct *tty, struct file *filp)
-{
-    struct SICC_info *info;
-    int retval, line = tty->index;
-
-
-    // is this a line that we've got?
-    if (line >= SERIAL_SICC_NR) {
-        return -ENODEV;
-    }
-
-    info = siccuart_get(line);
-    if (!info)
-        return -ENOMEM;
-
-    tty->driver_data = info;
-    info->tty = tty;
-    info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
-    /*
-     * Make sure we have the temporary buffer allocated
-     */
-    if (!tmp_buf) {
-        unsigned long page = get_zeroed_page(GFP_KERNEL);
-        if (tmp_buf)
-            free_page(page);
-        else if (!page) {
-            return -ENOMEM;
-        }
-        tmp_buf = (u_char *)page;
-    }
-
-    /*
-     * If the port is in the middle of closing, bail out now.
-     */
-    if (tty_hung_up_p(filp) ||
-        (info->flags & ASYNC_CLOSING)) {
-        if (info->flags & ASYNC_CLOSING)
-            interruptible_sleep_on(&info->close_wait);
-        return -EAGAIN;
-    }
-
-    /*
-     * Start up the serial port
-     */
-    retval = siccuart_startup(info);
-    if (retval) {
-        return retval;
-    }
-
-    retval = block_til_ready(tty, filp, info);
-    if (retval) {
-        return retval;
-    }
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-    if (siccuart_cons.cflag && siccuart_cons.index == line) {
-        tty->termios->c_cflag = siccuart_cons.cflag;
-        siccuart_cons.cflag = 0;
-        siccuart_change_speed(info, NULL);
-    }
-#endif
-    return 0;
-}
-
-static const struct tty_operations sicc_ops = {
-	.open = siccuart_open,
-	.close = siccuart_close,
-	.write = siccuart_write,
-	.put_char = siccuart_put_char,
-	.flush_chars = siccuart_flush_chars,
-	.write_room = siccuart_write_room,
-	.chars_in_buffer = siccuart_chars_in_buffer,
-	.flush_buffer  = siccuart_flush_buffer,
-	.ioctl = siccuart_ioctl,
-	.throttle = siccuart_throttle,
-	.unthrottle = siccuart_unthrottle,
-	.send_xchar = siccuart_send_xchar,
-	.set_termios = siccuart_set_termios,
-	.stop = siccuart_stop,
-	.start = siccuart_start,
-	.hangup = siccuart_hangup,
-	.break_ctl = siccuart_break_ctl,
-	.wait_until_sent = siccuart_wait_until_sent,
-};
-
-int __init siccuart_init(void)
-{
-    int i;
-    siccnormal_driver = alloc_tty_driver(SERIAL_SICC_NR);
-    if (!siccnormal_driver)
-	return -ENOMEM;
-    printk("IBM Vesta SICC serial port driver V 0.1 by Yudong Yang and Yi Ge / IBM CRL .\n");
-    siccnormal_driver->driver_name = "serial_sicc";
-    siccnormal_driver->owner = THIS_MODULE;
-    siccnormal_driver->name = SERIAL_SICC_NAME;
-    siccnormal_driver->major = SERIAL_SICC_MAJOR;
-    siccnormal_driver->minor_start = SERIAL_SICC_MINOR;
-    siccnormal_driver->type = TTY_DRIVER_TYPE_SERIAL;
-    siccnormal_driver->subtype = SERIAL_TYPE_NORMAL;
-    siccnormal_driver->init_termios = tty_std_termios;
-    siccnormal_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-    siccnormal_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-    tty_set_operations(siccnormal_driver, &sicc_ops);
-
-    if (tty_register_driver(siccnormal_driver))
-        panic("Couldn't register SICC serial driver\n");
-
-    for (i = 0; i < SERIAL_SICC_NR; i++) {
-        struct SICC_state *state = sicc_state + i;
-        state->line     = i;
-        state->close_delay  = msecs_to_jiffies(500);
-        state->closing_wait = 30 * HZ;
-	spin_lock_init(&state->sicc_lock);
-    }
-
-
-    return 0;
-}
-
-__initcall(siccuart_init);
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-/************** console driver *****************/
-
-/*
- * This code is currently never used; console->read is never called.
- * Therefore, although we have an implementation, we don't use it.
- * FIXME: the "const char *s" should be fixed to "char *s" some day.
- * (when the definition in include/linux/console.h is also fixed)
- */
-#ifdef used_and_not_const_char_pointer
-static int siccuart_console_read(struct console *co, const char *s, u_int count)
-{
-    struct SICC_port *port = &sicc_ports[co->index];
-    unsigned int status;
-    char *w;
-    int c;
-
-    pr_debug("siccuart_console_read() called\n");
-
-    c = 0;
-    w = s;
-    while (c < count) {
-        if(readb(port->uart_base +  BL_SICC_LSR) & _LSR_RBR_FULL) {
-            *w++ = readb(port->uart_base +  BL_SICC_RBR);
-            c++;
-        } else {
-            // nothing more to get, return
-            return c;
-        }
-    }
-    // return the count
-    return c;
-}
-#endif
-
-/*
- *  Print a string to the serial port trying not to disturb
- *  any possible real use of the port...
- *
- *  The console_lock must be held when we get here.
- */
-static void siccuart_console_write(struct console *co, const char *s, u_int count)
-{
-    struct SICC_port *port = &sicc_ports[co->index];
-    unsigned int old_cr;
-    int i;
-
-    /*
-     *  First save the CR then disable the interrupts
-     */
-    old_cr = readb(port->uart_base +  BL_SICC_TxCR);
-    writeb(old_cr & ~_TxCR_DME_MASK, port->uart_base +  BL_SICC_TxCR);
-
-    /*
-     *  Now, do each character
-     */
-    for (i = 0; i < count; i++) {
-        while ((readb(port->uart_base +  BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
-        writeb(s[i], port->uart_base +  BL_SICC_TBR);
-        if (s[i] == '\n') {
-            while ((readb(port->uart_base +  BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
-            writeb('\r', port->uart_base +  BL_SICC_TBR);
-        }
-    }
-
-    /*
-     *  Finally, wait for transmitter to become empty
-     *  and restore the TCR
-     */
-    while ((readb(port->uart_base +  BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
-    writeb(old_cr, port->uart_base +  BL_SICC_TxCR);
-}
-
-/*
- *  Receive character from the serial port
- */
-static int siccuart_console_wait_key(struct console *co)
-{
-    struct SICC_port *port = &sicc_ports[co->index];
-    int c;
-
-    while(!(readb(port->uart_base +  BL_SICC_LSR) & _LSR_RBR_FULL));
-    c = readb(port->uart_base +  BL_SICC_RBR);
-    return c;
-}
-
-static struct tty_driver *siccuart_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return siccnormal_driver;
-}
-
-static int __init siccuart_console_setup(struct console *co, char *options)
-{
-    struct SICC_port *port;
-    int baud = 9600;
-    int bits = 8;
-    int parity = 'n';
-    u_int cflag = CREAD | HUPCL | CLOCAL;
-    u_int lcr_h, quot;
-
-
-    if (co->index >= SERIAL_SICC_NR)
-        co->index = 0;
-
-    port = &sicc_ports[co->index];
-
-    if (port->uart_base == 0)
-	port->uart_base = (int)ioremap(port->uart_base_phys, PAGE_SIZE);
-
-    if (options) {
-        char *s = options;
-        baud = simple_strtoul(s, NULL, 10);
-        while (*s >= '0' && *s <= '9')
-            s++;
-        if (*s) parity = *s++;
-        if (*s) bits = *s - '0';
-    }
-
-    /*
-     *    Now construct a cflag setting.
-     */
-    switch (baud) {
-    case 1200:  cflag |= B1200;         break;
-    case 2400:  cflag |= B2400;         break;
-    case 4800:  cflag |= B4800;         break;
-    default:    cflag |= B9600;   baud = 9600;  break;
-    case 19200: cflag |= B19200;        break;
-    case 38400: cflag |= B38400;        break;
-    case 57600: cflag |= B57600;        break;
-    case 115200:    cflag |= B115200;       break;
-    }
-    switch (bits) {
-    case 7:   cflag |= CS7; lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT;   break;
-    default:  cflag |= CS8; lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT;   break;
-    }
-    switch (parity) {
-    case 'o':
-    case 'O': cflag |= PARODD; lcr_h |= _LCR_PTY_ODD;   break;
-    case 'e':
-    case 'E': cflag |= PARENB; lcr_h |= _LCR_PE_ENABLE |  _LCR_PTY_ODD; break;
-    }
-
-    co->cflag = cflag;
-
-
-       {
-           // a copy of is inserted here ppc403SetBaud(com_port, (int)9600);
-           unsigned long divisor, clockSource, temp;
-           unsigned int rate = baud;
-
-          /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
-          powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
-
-          /* Determine Internal Baud Clock Frequency */
-          /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
-          /* SCCR (Serial Clock Control Register) on Vesta */
-          temp = powerpcMfclkgpcr();
-
-          if(temp & 0x00000080) {
-              clockSource = 324000000;
-          }
-          else {
-              clockSource = 216000000;
-          }
-          clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
-          divisor = clockSource/(16*rate) - 1;
-          /* divisor has only 12 bits of resolution */
-          if(divisor>0x00000FFF){
-               divisor=0x00000FFF;
-          }
-
-          quot = divisor;
-       }
-
-    writeb((quot & 0x00000F00)>>8, port->uart_base + BL_SICC_BRDH );
-    writeb( quot & 0x00000FF,      port->uart_base   + BL_SICC_BRDL );
-
-    /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
-    /* For now, do NOT use FIFOs since 403 UART did not have this    */
-    /* capability and this driver was inherited from 403UART.        */
-    writeb(_CTL2_EXTERN, port->uart_base  + BL_SICC_CTL2);
-
-    writeb(lcr_h, port->uart_base + BL_SICC_LCR);
-    writeb(_RCR_ER_ENABLE | _RCR_PME_HARD, port->uart_base + BL_SICC_RCR);
-    writeb( _TxCR_ET_ENABLE , port->uart_base + BL_SICC_TxCR);
-
-    // writeb(, info->port->uart_base + BL_SICC_RCR );
-    /*
-     * Transmitter Command Register: Transmitter enabled & DMA + TBR interrupt
-     * + Transmitter Empty interrupt + Transmitter error interrupt disabled &
-     * Stop mode when CTS active enabled & Transmit Break + Pattern Generation
-     * mode disabled.
-     */
-
-    writeb( 0x00, port->uart_base + BL_SICC_IrCR );  // disable IrDA
-
-    readb(port->uart_base + BL_SICC_RBR);
-
-    writeb(0xf8, port->uart_base + BL_SICC_LSR);   /* reset bits 0-4 of LSR */
-
-    /* we will enable the port as we need it */
-
-    return 0;
-}
-
-static struct console siccuart_cons =
-{
-    .name =     SERIAL_SICC_NAME,
-    .write =    siccuart_console_write,
-#ifdef used_and_not_const_char_pointer
-    .read =     siccuart_console_read,
-#endif
-    .device =   siccuart_console_device,
-    .wait_key = siccuart_console_wait_key,
-    .setup =    siccuart_console_setup,
-    .flags =    CON_PRINTBUFFER,
-    .index =    -1,
-};
-
-void __init sicc_console_init(void)
-{
-    register_console(&siccuart_cons);
-}
-
-#endif /* CONFIG_SERIAL_SICC_CONSOLE */
diff --git a/arch/ppc/8260_io/Kconfig b/arch/ppc/8260_io/Kconfig
deleted file mode 100644
index ea9651e2dd6a..000000000000
--- a/arch/ppc/8260_io/Kconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-# CPM2 Communication options
-#
-
-menu "CPM2 Options"
-	depends on CPM2
-
-config SCC_ENET
-	bool "CPM SCC Ethernet"
-	depends on NET_ETHERNET
-
-#
-#  CONFIG_FEC_ENET is only used to get netdevices to call our init
-#    function.  Any combination of FCC1,2,3 are supported.
-#
-config FEC_ENET
-	bool "FCC Ethernet"
-	depends on NET_ETHERNET
-
-config FCC1_ENET
-	bool "Ethernet on FCC1"
-	depends on FEC_ENET
-	help
-	  Use CPM2 fast Ethernet controller 1 to drive Ethernet (default).
-
-config FCC2_ENET
-	bool "Ethernet on FCC2"
-	depends on FEC_ENET
-	help
-	  Use CPM2 fast Ethernet controller 2 to drive Ethernet.
-
-config FCC3_ENET
-	bool "Ethernet on FCC3"
-	depends on FEC_ENET
-	help
-	  Use CPM2 fast Ethernet controller 3 to drive Ethernet.
-
-config USE_MDIO
-	bool "Use MDIO for PHY configuration"
-	depends on FEC_ENET
-
-choice
-	prompt "Type of PHY"
-	depends on 8260 && USE_MDIO
-	default FCC_GENERIC_PHY
-
-config FCC_LXT970
-	bool "LXT970"
-
-config FCC_LXT971
-	bool "LXT971"
-
-config FCC_QS6612
-	bool "QS6612"
-
-config FCC_DM9131
-	bool "DM9131"
-
-config FCC_DM9161
-	bool "DM9161"
-
-config FCC_GENERIC_PHY
-	bool "Generic"
-endchoice
-endmenu
diff --git a/arch/ppc/8260_io/Makefile b/arch/ppc/8260_io/Makefile
deleted file mode 100644
index 971f292c5d48..000000000000
--- a/arch/ppc/8260_io/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of comm processor (v2)
-#
-
-obj-$(CONFIG_FEC_ENET)	+= fcc_enet.o
-obj-$(CONFIG_SCC_ENET)	+= enet.o
diff --git a/arch/ppc/8260_io/enet.c b/arch/ppc/8260_io/enet.c
deleted file mode 100644
index ec1defea9c1e..000000000000
--- a/arch/ppc/8260_io/enet.c
+++ /dev/null
@@ -1,865 +0,0 @@
-/*
- * Ethernet driver for Motorola MPC8260.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software Inc. (source@mvista.com)
- *	2.3.99 Updates
- *
- * I copied this from the 8xx CPM Ethernet driver, so follow the
- * credits back through that.
- *
- * This version of the driver is somewhat selectable for the different
- * processor/board combinations.  It works for the boards I know about
- * now, and should be easily modified to include others.  Some of the
- * configuration information is contained in <asm/cpm1.h> and the
- * remainder is here.
- *
- * Buffer descriptors are kept in the CPM dual port RAM, and the frame
- * buffers are in the host memory.
- *
- * Right now, I am very watseful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/uaccess.h>
-#include <asm/cpm2.h>
-#include <asm/irq.h>
-
-/*
- *				Theory of Operation
- *
- * The MPC8260 CPM performs the Ethernet processing on an SCC.  It can use
- * an aribtrary number of buffers on byte boundaries, but must have at
- * least two receive buffers to prevent constant overrun conditions.
- *
- * The buffer descriptors are allocated from the CPM dual port memory
- * with the data buffers allocated from host memory, just like all other
- * serial communication protocols.  The host memory buffers are allocated
- * from the free page pool, and then divided into smaller receive and
- * transmit buffers.  The size of the buffers should be a power of two,
- * since that nicely divides the page.  This creates a ring buffer
- * structure similar to the LANCE and other controllers.
- *
- * Like the LANCE driver:
- * The driver runs as two independent, single-threaded flows of control.  One
- * is the send-packet routine, which enforces single-threaded use by the
- * cep->tx_busy flag.  The other thread is the interrupt handler, which is
- * single threaded by the hardware and other software.
- */
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT	(2*HZ)
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#define CPM_ENET_RX_PAGES	4
-#define CPM_ENET_RX_FRSIZE	2048
-#define CPM_ENET_RX_FRPPG	(PAGE_SIZE / CPM_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
-#define TX_RING_SIZE		8	/* Must be power of two */
-#define TX_RING_MOD_MASK	7	/*   for this to work */
-
-/* The CPM stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-/* The CPM buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct scc_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-	scc_t	*sccp;
-	struct	net_device_stats stats;
-	uint	tx_full;
-	spinlock_t lock;
-};
-
-static int scc_enet_open(struct net_device *dev);
-static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int scc_enet_rx(struct net_device *dev);
-static irqreturn_t scc_enet_interrupt(int irq, void *dev_id);
-static int scc_enet_close(struct net_device *dev);
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-
-/* These will be configurable for the SCC choice.
-*/
-#define CPM_ENET_BLOCK	CPM_CR_SCC1_SBLOCK
-#define CPM_ENET_PAGE	CPM_CR_SCC1_PAGE
-#define PROFF_ENET	PROFF_SCC1
-#define SCC_ENET	0
-#define SIU_INT_ENET	SIU_INT_SCC1
-
-/* These are both board and SCC dependent....
-*/
-#define PD_ENET_RXD	((uint)0x00000001)
-#define PD_ENET_TXD	((uint)0x00000002)
-#define PD_ENET_TENA	((uint)0x00000004)
-#define PC_ENET_RENA	((uint)0x00020000)
-#define PC_ENET_CLSN	((uint)0x00000004)
-#define PC_ENET_TXCLK	((uint)0x00000800)
-#define PC_ENET_RXCLK	((uint)0x00000400)
-#define CMX_CLK_ROUTE	((uint)0x25000000)
-#define CMX_CLK_MASK	((uint)0xff000000)
-
-/* Specific to a board.
-*/
-#define PC_EST8260_ENET_LOOPBACK	((uint)0x80000000)
-#define PC_EST8260_ENET_SQE		((uint)0x40000000)
-#define PC_EST8260_ENET_NOTFD		((uint)0x20000000)
-
-static int
-scc_enet_open(struct net_device *dev)
-{
-
-	/* I should reset the ring buffers here, but I don't yet know
-	 * a simple way to do that.
-	 */
-	netif_start_queue(dev);
-	return 0;					/* Always succeed */
-}
-
-static int
-scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-	volatile cbd_t	*bdp;
-
-
-	/* Fill in a Tx ring entry */
-	bdp = cep->cur_tx;
-
-#ifndef final_version
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since cep->tx_full should be set.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags.
-	 */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* If the frame is short, tell CPM to pad it.
-	*/
-	if (skb->len <= ETH_ZLEN)
-		bdp->cbd_sc |= BD_ENET_TX_PAD;
-	else
-		bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
-	/* Set buffer length and buffer pointer.
-	*/
-	bdp->cbd_datlen = skb->len;
-	bdp->cbd_bufaddr = __pa(skb->data);
-
-	/* Save skb pointer.
-	*/
-	cep->tx_skbuff[cep->skb_cur] = skb;
-
-	cep->stats.tx_bytes += skb->len;
-	cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	spin_lock_irq(&cep->lock);
-
-	/* Send it on its way.  Tell CPM its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-	dev->trans_start = jiffies;
-
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-		bdp = cep->tx_bd_base;
-	else
-		bdp++;
-
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		netif_stop_queue(dev);
-		cep->tx_full = 1;
-	}
-
-	cep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&cep->lock);
-
-	return 0;
-}
-
-static void
-scc_enet_timeout(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	cep->stats.tx_errors++;
-#ifndef final_version
-	{
-		int	i;
-		cbd_t	*bdp;
-		printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n",
-		       cep->cur_tx, cep->tx_full ? " (full)" : "",
-		       cep->cur_rx);
-		bdp = cep->tx_bd_base;
-		printk(" Tx @base %p :\n", bdp);
-		for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-		bdp = cep->rx_bd_base;
-		printk(" Rx @base %p :\n", bdp);
-		for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-	}
-#endif
-	if (!cep->tx_full)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the CPM handler, not the MPC core interrupt.
- */
-static irqreturn_t
-scc_enet_interrupt(int irq, void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	ushort	int_events;
-	int	must_restart;
-
-	cep = dev->priv;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	int_events = cep->sccp->scc_scce;
-	cep->sccp->scc_scce = int_events;
-	must_restart = 0;
-
-	/* Handle receive event in its own function.
-	*/
-	if (int_events & SCCE_ENET_RXF)
-		scc_enet_rx(dev_id);
-
-	/* Check for a transmit error.  The manual is a little unclear
-	 * about this, so the debug code until I get it figured out.  It
-	 * appears that if TXE is set, then TXB is not set.  However,
-	 * if carrier sense is lost during frame transmission, the TXE
-	 * bit is set, "and continues the buffer transmission normally."
-	 * I don't know if "normally" implies TXB is set when the buffer
-	 * descriptor is closed.....trial and error :-).
-	 */
-
-	/* Transmit OK, or non-fatal error.  Update the buffer descriptors.
-	*/
-	if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) {
-	    spin_lock(&cep->lock);
-	    bdp = cep->dirty_tx;
-	    while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
-		if ((bdp==cep->cur_tx) && (cep->tx_full == 0))
-		    break;
-
-		if (bdp->cbd_sc & BD_ENET_TX_HB)	/* No heartbeat */
-			cep->stats.tx_heartbeat_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_LC)	/* Late collision */
-			cep->stats.tx_window_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_RL)	/* Retrans limit */
-			cep->stats.tx_aborted_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_UN)	/* Underrun */
-			cep->stats.tx_fifo_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_CSL)	/* Carrier lost */
-			cep->stats.tx_carrier_errors++;
-
-
-		/* No heartbeat or Lost carrier are not really bad errors.
-		 * The others require a restart transmit command.
-		 */
-		if (bdp->cbd_sc &
-		    (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
-			must_restart = 1;
-			cep->stats.tx_errors++;
-		}
-
-		cep->stats.tx_packets++;
-
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			cep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit.
-		*/
-		dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
-		cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted.
-		*/
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = cep->tx_bd_base;
-		else
-			bdp++;
-
-		/* I don't know if we can be held off from processing these
-		 * interrupts for more than one frame time.  I really hope
-		 * not.  In such a case, we would now want to check the
-		 * currently available BD (cur_tx) and determine if any
-		 * buffers between the dirty_tx and cur_tx have also been
-		 * sent.  We would want to process anything in between that
-		 * does not have BD_ENET_TX_READY set.
-		 */
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (cep->tx_full) {
-			cep->tx_full = 0;
-			if (netif_queue_stopped(dev)) {
-				netif_wake_queue(dev);
-			}
-		}
-
-		cep->dirty_tx = (cbd_t *)bdp;
-	    }
-
-	    if (must_restart) {
-		volatile cpm_cpm2_t *cp;
-
-		/* Some transmit errors cause the transmitter to shut
-		 * down.  We now issue a restart transmit.  Since the
-		 * errors close the BD and update the pointers, the restart
-		 * _should_ pick up without having to reset any of our
-		 * pointers either.
-		 */
-
-		cp = cpmp;
-		cp->cp_cpcr =
-		    mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0,
-		    			CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	    }
-	    spin_unlock(&cep->lock);
-	}
-
-	/* Check for receive busy, i.e. packets coming but no place to
-	 * put them.  This "can't happen" because the receive interrupt
-	 * is tossing previous frames.
-	 */
-	if (int_events & SCCE_ENET_BSY) {
-		cep->stats.rx_dropped++;
-		printk("SCC ENET: BSY can't happen.\n");
-	}
-
-	return IRQ_HANDLED;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-scc_enet_rx(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff *skb;
-	ushort	pkt_len;
-
-	cep = dev->priv;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = cep->cur_rx;
-
-for (;;) {
-	if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
-		break;
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame, both
-	 * the first and last indicators should be set.
-	 */
-	if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
-		(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
-			printk("CPM ENET: rcv is not first+last\n");
-#endif
-
-	/* Frame too long or too short.
-	*/
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
-		cep->stats.rx_length_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-		cep->stats.rx_frame_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-		cep->stats.rx_crc_errors++;
-
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (bdp->cbd_sc & BD_ENET_RX_CL) {
-		cep->stats.rx_frame_errors++;
-	}
-	else {
-
-		/* Process the incoming frame.
-		*/
-		cep->stats.rx_packets++;
-		pkt_len = bdp->cbd_datlen;
-		cep->stats.rx_bytes += pkt_len;
-
-		/* This does 16 byte alignment, much more than we need.
-		 * The packet length includes FCS, but we don't want to
-		 * include that when passing upstream as it messes up
-		 * bridging applications.
-		 */
-		skb = dev_alloc_skb(pkt_len-4);
-
-		if (skb == NULL) {
-			printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-			cep->stats.rx_dropped++;
-		}
-		else {
-			skb_put(skb,pkt_len-4);	/* Make room */
-			skb_copy_to_linear_data(skb,
-				(unsigned char *)__va(bdp->cbd_bufaddr),
-				pkt_len-4);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb);
-		}
-	}
-
-	/* Clear the status flags for this buffer.
-	*/
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty.
-	*/
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry.
-	*/
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = cep->rx_bd_base;
-	else
-		bdp++;
-
-   }
-	cep->cur_rx = (cbd_t *)bdp;
-
-	return 0;
-}
-
-static int
-scc_enet_close(struct net_device *dev)
-{
-	/* Don't know what to do yet.
-	*/
-	netif_stop_queue(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	return &cep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	struct	dev_mc_list *dmi;
-	u_char	*mcptr, *tdptr;
-	volatile scc_enet_t *ep;
-	int	i, j;
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)dev->base_addr;
-
-	if (dev->flags&IFF_PROMISC) {
-	
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->sccp->scc_psmr |= SCC_PSMR_PRO;
-	} else {
-
-		cep->sccp->scc_psmr &= ~SCC_PSMR_PRO;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->sen_gaddr1 = 0xffff;
-			ep->sen_gaddr2 = 0xffff;
-			ep->sen_gaddr3 = 0xffff;
-			ep->sen_gaddr4 = 0xffff;
-		}
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->sen_gaddr1 = 0;
-			ep->sen_gaddr2 = 0;
-			ep->sen_gaddr3 = 0;
-			ep->sen_gaddr4 = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++) {
-		
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->sen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE,
-						CPM_ENET_BLOCK, 0,
-						CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				/* this delay is necessary here -- Cort */
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-	}
-}
-
-/* Initialize the CPM Ethernet on SCC.
- */
-static int __init scc_enet_init(void)
-{
-	struct net_device *dev;
-	struct scc_enet_private *cep;
-	int i, j, err;
-	uint dp_offset;
-	unsigned char	*eap;
-	unsigned long	mem_addr;
-	bd_t		*bd;
-	volatile	cbd_t		*bdp;
-	volatile	cpm_cpm2_t	*cp;
-	volatile	scc_t		*sccp;
-	volatile	scc_enet_t	*ep;
-	volatile	cpm2_map_t		*immap;
-	volatile	iop_cpm2_t	*io;
-
-	cp = cpmp;	/* Get pointer to Communication Processor */
-
-	immap = (cpm2_map_t *)CPM_MAP_ADDR;	/* and to internal registers */
-	io = &immap->im_ioport;
-
-	bd = (bd_t *)__res;
-
-	/* Create an Ethernet device instance.
-	*/
-	dev = alloc_etherdev(sizeof(*cep));
-	if (!dev)
-		return -ENOMEM;
-
-	cep = dev->priv;
-	spin_lock_init(&cep->lock);
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)(&immap->im_dprambase[PROFF_ENET]);
-
-	/* And another to the SCC register area.
-	*/
-	sccp = (volatile scc_t *)(&immap->im_scc[SCC_ENET]);
-	cep->sccp = (scc_t *)sccp;		/* Keep the pointer handy */
-
-	/* Disable receive and transmit in case someone left it running.
-	*/
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/* Configure port C and D pins for SCC Ethernet.  This
-	 * won't work for all SCC possibilities....it will be
-	 * board/port specific.
-	 */
-	io->iop_pparc |=
-		(PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK);
-	io->iop_pdirc &=
-		~(PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK);
-	io->iop_psorc &=
-		~(PC_ENET_RENA | PC_ENET_TXCLK | PC_ENET_RXCLK);
-	io->iop_psorc |= PC_ENET_CLSN;
-
-	io->iop_ppard |= (PD_ENET_RXD | PD_ENET_TXD | PD_ENET_TENA);
-	io->iop_pdird |= (PD_ENET_TXD | PD_ENET_TENA);
-	io->iop_pdird &= ~PD_ENET_RXD;
-	io->iop_psord |= PD_ENET_TXD;
-	io->iop_psord &= ~(PD_ENET_RXD | PD_ENET_TENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	immap->im_cpmux.cmx_scr &= ~CMX_CLK_MASK;
-	immap->im_cpmux.cmx_scr |= CMX_CLK_ROUTE;
-
-	/* Allocate space for the buffer descriptors in the DP ram.
-	 * These are relative offsets in the DP ram address space.
-	 * Initialize base addresses for the buffer descriptors.
-	 */
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8);
-	ep->sen_genscc.scc_rbase = dp_offset;
-	cep->rx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset);
-
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8);
-	ep->sen_genscc.scc_tbase = dp_offset;
-	cep->tx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset);
-
-	cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
-	cep->cur_rx = cep->rx_bd_base;
-
-	ep->sen_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
-	ep->sen_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
-
-	/* Set maximum bytes per receive buffer.
-	 * This appears to be an Ethernet frame size, not the buffer
-	 * fragment size.  It must be a multiple of four.
-	 */
-	ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE;
-
-	/* Set CRC preset and mask.
-	*/
-	ep->sen_cpres = 0xffffffff;
-	ep->sen_cmask = 0xdebb20e3;
-
-	ep->sen_crcec = 0;	/* CRC Error counter */
-	ep->sen_alec = 0;	/* alignment error counter */
-	ep->sen_disfc = 0;	/* discard frame counter */
-
-	ep->sen_pads = 0x8888;	/* Tx short frame pad character */
-	ep->sen_retlim = 15;	/* Retry limit threshold */
-
-	ep->sen_maxflr = PKT_MAXBUF_SIZE;   /* maximum frame length register */
-	ep->sen_minflr = PKT_MINBUF_SIZE;  /* minimum frame length register */
-
-	ep->sen_maxd1 = PKT_MAXBLR_SIZE;	/* maximum DMA1 length */
-	ep->sen_maxd2 = PKT_MAXBLR_SIZE;	/* maximum DMA2 length */
-
-	/* Clear hash tables.
-	*/
-	ep->sen_gaddr1 = 0;
-	ep->sen_gaddr2 = 0;
-	ep->sen_gaddr3 = 0;
-	ep->sen_gaddr4 = 0;
-	ep->sen_iaddr1 = 0;
-	ep->sen_iaddr2 = 0;
-	ep->sen_iaddr3 = 0;
-	ep->sen_iaddr4 = 0;
-
-	/* Set Ethernet station address.
-	 *
-	 * This is supplied in the board information structure, so we
-	 * copy that into the controller.
-	 */
-	eap = (unsigned char *)&(ep->sen_paddrh);
-	for (i=5; i>=0; i--)
-		*eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
-
-	ep->sen_pper = 0;	/* 'cause the book says so */
-	ep->sen_taddrl = 0;	/* temp address (LSB) */
-	ep->sen_taddrm = 0;
-	ep->sen_taddrh = 0;	/* temp address (MSB) */
-
-	/* Now allocate the host memory pages and initialize the
-	 * buffer descriptors.
-	 */
-	bdp = cep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	bdp = cep->rx_bd_base;
-	for (i=0; i<CPM_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		mem_addr = __get_free_page(GFP_KERNEL);
-		/* BUG: no check for failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<CPM_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
-			bdp->cbd_bufaddr = __pa(mem_addr);
-			mem_addr += CPM_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Let's re-initialize the channel now.  We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0,
-			CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	cep->skb_cur = cep->skb_dirty = 0;
-
-	sccp->scc_scce = 0xffff;	/* Clear any pending events */
-
-	/* Enable interrupts for transmit error, complete frame
-	 * received, and any transmit buffer we have also set the
-	 * interrupt flag.
-	 */
-	sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
-
-	/* Install our interrupt handler.
-	*/
-	request_irq(SIU_INT_ENET, scc_enet_interrupt, 0, "enet", dev);
-	/* BUG: no check for failure */
-
-	/* Set GSMR_H to enable all normal operating modes.
-	 * Set GSMR_L to enable Ethernet to MC68160.
-	 */
-	sccp->scc_gsmrh = 0;
-	sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
-
-	/* Set sync/delimiters.
-	*/
-	sccp->scc_dsr = 0xd555;
-
-	/* Set processing mode.  Use Ethernet CRC, catch broadcast, and
-	 * start frame search 22 bit times after RENA.
-	 */
-	sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
-
-	/* It is now OK to enable the Ethernet transmitter.
-	 * Unfortunately, there are board implementation differences here.
-	 */
-	io->iop_pparc &= ~(PC_EST8260_ENET_LOOPBACK |
-				PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD);
-	io->iop_psorc &= ~(PC_EST8260_ENET_LOOPBACK |
-				PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD);
-	io->iop_pdirc |= (PC_EST8260_ENET_LOOPBACK |
-				PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD);
-	io->iop_pdatc &= ~(PC_EST8260_ENET_LOOPBACK | PC_EST8260_ENET_SQE);
-	io->iop_pdatc |= PC_EST8260_ENET_NOTFD;
-
-	dev->base_addr = (unsigned long)ep;
-
-	/* The CPM Ethernet specific entries in the device structure. */
-	dev->open = scc_enet_open;
-	dev->hard_start_xmit = scc_enet_start_xmit;
-	dev->tx_timeout = scc_enet_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = scc_enet_close;
-	dev->get_stats = scc_enet_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-
-	/* And last, enable the transmit and receive processing.
-	*/
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	printk("%s: SCC ENET Version 0.1, ", dev->name);
-	for (i=0; i<5; i++)
-		printk("%02x:", dev->dev_addr[i]);
-	printk("%02x\n", dev->dev_addr[5]);
-
-	return 0;
-}
-
-module_init(scc_enet_init);
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
deleted file mode 100644
index d38b57e24cee..000000000000
--- a/arch/ppc/8260_io/fcc_enet.c
+++ /dev/null
@@ -1,2379 +0,0 @@
-/*
- * Fast Ethernet Controller (FCC) driver for Motorola MPC8260.
- * Copyright (c) 2000 MontaVista Software, Inc.   Dan Malek (dmalek@jlc.net)
- *
- * This version of the driver is a combination of the 8xx fec and
- * 8260 SCC Ethernet drivers.  This version has some additional
- * configuration options, which should probably be moved out of
- * here.  This driver currently works for the EST SBC8260,
- * SBS Diablo/BCM, Embedded Planet RPX6, TQM8260, and others.
- *
- * Right now, I am very watseful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.  Since this is a cache coherent processor and CPM,
- * I could also preallocate SKB's and use them directly on the interface.
- *
- * 2004-12	Leo Li (leoli@freescale.com)
- * - Rework the FCC clock configuration part, make it easier to configure.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mii.h>
-#include <linux/workqueue.h>
-#include <linux/bitops.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/signal.h>
-
-/* We can't use the PHY interrupt if we aren't using MDIO. */
-#if !defined(CONFIG_USE_MDIO)
-#undef PHY_INTERRUPT
-#endif
-
-/* If we have a PHY interrupt, we will advertise both full-duplex and half-
- * duplex capabilities.  If we don't have a PHY interrupt, then we will only
- * advertise half-duplex capabilities.
- */
-#define MII_ADVERTISE_HALF	(ADVERTISE_100HALF | ADVERTISE_10HALF | \
-				 ADVERTISE_CSMA)
-#define MII_ADVERTISE_ALL	(ADVERTISE_100FULL | ADVERTISE_10FULL | \
-				 MII_ADVERTISE_HALF)
-#ifdef PHY_INTERRUPT
-#define MII_ADVERTISE_DEFAULT	MII_ADVERTISE_ALL
-#else
-#define MII_ADVERTISE_DEFAULT	MII_ADVERTISE_HALF
-#endif
-#include <asm/cpm2.h>
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT	(2*HZ)
-
-#ifdef	CONFIG_USE_MDIO
-/* Forward declarations of some structures to support different PHYs */
-
-typedef struct {
-	uint mii_data;
-	void (*funct)(uint mii_reg, struct net_device *dev);
-} phy_cmd_t;
-
-typedef struct {
-	uint id;
-	char *name;
-
-	const phy_cmd_t *config;
-	const phy_cmd_t *startup;
-	const phy_cmd_t *ack_int;
-	const phy_cmd_t *shutdown;
-} phy_info_t;
-
-/* values for phy_status */
-
-#define PHY_CONF_ANE	0x0001  /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP	0x0002  /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK	0x00f0  /* mask for speed */
-#define PHY_CONF_10HDX	0x0010  /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX	0x0020  /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX	0x0040  /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX	0x0080  /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK	0x0100  /* 1 up - 0 down */
-#define PHY_STAT_FAULT	0x0200  /* 1 remote fault */
-#define PHY_STAT_ANC	0x0400  /* 1 auto-negotiation complete	*/
-#define PHY_STAT_SPMASK	0xf000  /* mask for speed */
-#define PHY_STAT_10HDX	0x1000  /* 10 Mbit half duplex selected	*/
-#define PHY_STAT_10FDX	0x2000  /* 10 Mbit full duplex selected	*/
-#define PHY_STAT_100HDX	0x4000  /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX	0x8000  /* 100 Mbit full duplex selected */
-#endif	/* CONFIG_USE_MDIO */
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#define FCC_ENET_RX_PAGES	16
-#define FCC_ENET_RX_FRSIZE	2048
-#define FCC_ENET_RX_FRPPG	(PAGE_SIZE / FCC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(FCC_ENET_RX_FRPPG * FCC_ENET_RX_PAGES)
-#define TX_RING_SIZE		16	/* Must be power of two */
-#define TX_RING_MOD_MASK	15	/*   for this to work */
-
-/* The FCC stores dest/src/type, data, and checksum for receive packets.
- * size includes support for VLAN
- */
-#define PKT_MAXBUF_SIZE		1522
-#define PKT_MINBUF_SIZE		64
-
-/* Maximum input DMA size.  Must be a should(?) be a multiple of 4.
- * size includes support for VLAN
- */
-#define PKT_MAXDMA_SIZE		1524
-
-/* Maximum input buffer size.  Must be a multiple of 32.
-*/
-#define PKT_MAXBLR_SIZE		1536
-
-static int fcc_enet_open(struct net_device *dev);
-static int fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int fcc_enet_rx(struct net_device *dev);
-static irqreturn_t fcc_enet_interrupt(int irq, void *dev_id);
-static int fcc_enet_close(struct net_device *dev);
-static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev);
-/* static void set_multicast_list(struct net_device *dev); */
-static void fcc_restart(struct net_device *dev, int duplex);
-static void fcc_stop(struct net_device *dev);
-static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
-
-/* These will be configurable for the FCC choice.
- * Multiple ports can be configured.  There is little choice among the
- * I/O pins to the PHY, except the clocks.  We will need some board
- * dependent clock selection.
- * Why in the hell did I put these inside #ifdef's?  I dunno, maybe to
- * help show what pins are used for each device.
- */
-
-/* Since the CLK setting changes greatly from board to board, I changed
- * it to a easy way.  You just need to specify which CLK number to use.
- * Note that only limited choices can be make on each port.
- */
-
-/* FCC1 Clock Source Configuration.  There are board specific.
-   Can only choose from CLK9-12 */
-#ifdef CONFIG_SBC82xx
-#define F1_RXCLK	9
-#define F1_TXCLK	10
-#else
-#define F1_RXCLK	12
-#define F1_TXCLK	11
-#endif
-
-/* FCC2 Clock Source Configuration.  There are board specific.
-   Can only choose from CLK13-16 */
-#define F2_RXCLK	13
-#define F2_TXCLK	14
-
-/* FCC3 Clock Source Configuration.  There are board specific.
-   Can only choose from CLK13-16 */
-#define F3_RXCLK	15
-#define F3_TXCLK	16
-
-/* Automatically generates register configurations */
-#define PC_CLK(x)	((uint)(1<<(x-1)))	/* FCC CLK I/O ports */
-
-#define CMXFCR_RF1CS(x)	((uint)((x-5)<<27))	/* FCC1 Receive Clock Source */
-#define CMXFCR_TF1CS(x)	((uint)((x-5)<<24))	/* FCC1 Transmit Clock Source */
-#define CMXFCR_RF2CS(x)	((uint)((x-9)<<19))	/* FCC2 Receive Clock Source */
-#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))	/* FCC2 Transmit Clock Source */
-#define CMXFCR_RF3CS(x)	((uint)((x-9)<<11))	/* FCC3 Receive Clock Source */
-#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))	/* FCC3 Transmit Clock Source */
-
-#define PC_F1RXCLK	PC_CLK(F1_RXCLK)
-#define PC_F1TXCLK	PC_CLK(F1_TXCLK)
-#define CMX1_CLK_ROUTE	(CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
-#define CMX1_CLK_MASK	((uint)0xff000000)
-
-#define PC_F2RXCLK	PC_CLK(F2_RXCLK)
-#define PC_F2TXCLK	PC_CLK(F2_TXCLK)
-#define CMX2_CLK_ROUTE	(CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
-#define CMX2_CLK_MASK	((uint)0x00ff0000)
-
-#define PC_F3RXCLK	PC_CLK(F3_RXCLK)
-#define PC_F3TXCLK	PC_CLK(F3_TXCLK)
-#define CMX3_CLK_ROUTE	(CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
-#define CMX3_CLK_MASK	((uint)0x0000ff00)
-
-
-/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PA1_COL		((uint)0x00000001)
-#define PA1_CRS		((uint)0x00000002)
-#define PA1_TXER	((uint)0x00000004)
-#define PA1_TXEN	((uint)0x00000008)
-#define PA1_RXDV	((uint)0x00000010)
-#define PA1_RXER	((uint)0x00000020)
-#define PA1_TXDAT	((uint)0x00003c00)
-#define PA1_RXDAT	((uint)0x0003c000)
-#define PA1_PSORA_BOUT	(PA1_RXDAT | PA1_TXDAT)
-#define PA1_PSORA_BIN	(PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
-				PA1_RXDV | PA1_RXER)
-#define PA1_DIRA_BOUT	(PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
-#define PA1_DIRA_BIN	(PA1_TXDAT | PA1_TXEN | PA1_TXER)
-
-
-/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB2_TXER	((uint)0x00000001)
-#define PB2_RXDV	((uint)0x00000002)
-#define PB2_TXEN	((uint)0x00000004)
-#define PB2_RXER	((uint)0x00000008)
-#define PB2_COL		((uint)0x00000010)
-#define PB2_CRS		((uint)0x00000020)
-#define PB2_TXDAT	((uint)0x000003c0)
-#define PB2_RXDAT	((uint)0x00003c00)
-#define PB2_PSORB_BOUT	(PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
-				PB2_RXER | PB2_RXDV | PB2_TXER)
-#define PB2_PSORB_BIN	(PB2_TXEN)
-#define PB2_DIRB_BOUT	(PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
-#define PB2_DIRB_BIN	(PB2_TXDAT | PB2_TXEN | PB2_TXER)
-
-
-/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB3_RXDV	((uint)0x00004000)
-#define PB3_RXER	((uint)0x00008000)
-#define PB3_TXER	((uint)0x00010000)
-#define PB3_TXEN	((uint)0x00020000)
-#define PB3_COL		((uint)0x00040000)
-#define PB3_CRS		((uint)0x00080000)
-#ifndef CONFIG_RPX8260
-#define PB3_TXDAT	((uint)0x0f000000)
-#define PC3_TXDAT	((uint)0x00000000)
-#else
-#define PB3_TXDAT	((uint)0x0f000000)
-#define PC3_TXDAT	0
-#endif
-#define PB3_RXDAT	((uint)0x00f00000)
-#define PB3_PSORB_BOUT	(PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
-				PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
-#define PB3_PSORB_BIN	(0)
-#define PB3_DIRB_BOUT	(PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
-#define PB3_DIRB_BIN	(PB3_TXDAT | PB3_TXEN | PB3_TXER)
-
-#define PC3_PSORC_BOUT	(PC3_TXDAT)
-#define PC3_PSORC_BIN	(0)
-#define PC3_DIRC_BOUT	(0)
-#define PC3_DIRC_BIN	(PC3_TXDAT)
-
-
-/* MII status/control serial interface.
-*/
-#if defined(CONFIG_RPX8260)
-/* The EP8260 doesn't use Port C for MDIO */
-#define PC_MDIO		((uint)0x00000000)
-#define PC_MDCK		((uint)0x00000000)
-#elif defined(CONFIG_TQM8260)
-/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */
-#define PC_MDIO		((uint)0x00000002)
-#define PC_MDCK		((uint)0x00000001)
-#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260)
-#define PC_MDIO		((uint)0x00400000)
-#define PC_MDCK		((uint)0x00200000)
-#else
-#define PC_MDIO		((uint)0x00000004)
-#define PC_MDCK		((uint)0x00000020)
-#endif
-
-#if defined(CONFIG_USE_MDIO) && (!defined(PC_MDIO) || !defined(PC_MDCK))
-#error "Must define PC_MDIO and PC_MDCK if using MDIO"
-#endif
-
-/* PHY addresses */
-/* default to dynamic config of phy addresses */
-#define FCC1_PHY_ADDR 0
-#ifdef CONFIG_PQ2FADS
-#define FCC2_PHY_ADDR 0
-#else
-#define FCC2_PHY_ADDR 2
-#endif
-#define FCC3_PHY_ADDR 3
-
-/* A table of information for supporting FCCs.  This does two things.
- * First, we know how many FCCs we have and they are always externally
- * numbered from zero.  Second, it holds control register and I/O
- * information that could be different among board designs.
- */
-typedef struct fcc_info {
-	uint	fc_fccnum;
-	uint	fc_phyaddr;
-	uint	fc_cpmblock;
-	uint	fc_cpmpage;
-	uint	fc_proff;
-	uint	fc_interrupt;
-	uint	fc_trxclocks;
-	uint	fc_clockroute;
-	uint	fc_clockmask;
-	uint	fc_mdio;
-	uint	fc_mdck;
-} fcc_info_t;
-
-static fcc_info_t fcc_ports[] = {
-#ifdef CONFIG_FCC1_ENET
-	{ 0, FCC1_PHY_ADDR, CPM_CR_FCC1_SBLOCK, CPM_CR_FCC1_PAGE, PROFF_FCC1, SIU_INT_FCC1,
-		(PC_F1RXCLK | PC_F1TXCLK), CMX1_CLK_ROUTE, CMX1_CLK_MASK,
-		PC_MDIO, PC_MDCK },
-#endif
-#ifdef CONFIG_FCC2_ENET
-	{ 1, FCC2_PHY_ADDR, CPM_CR_FCC2_SBLOCK, CPM_CR_FCC2_PAGE, PROFF_FCC2, SIU_INT_FCC2,
-		(PC_F2RXCLK | PC_F2TXCLK), CMX2_CLK_ROUTE, CMX2_CLK_MASK,
-		PC_MDIO, PC_MDCK },
-#endif
-#ifdef CONFIG_FCC3_ENET
-	{ 2, FCC3_PHY_ADDR, CPM_CR_FCC3_SBLOCK, CPM_CR_FCC3_PAGE, PROFF_FCC3, SIU_INT_FCC3,
-		(PC_F3RXCLK | PC_F3TXCLK), CMX3_CLK_ROUTE, CMX3_CLK_MASK,
-		PC_MDIO, PC_MDCK },
-#endif
-};
-
-/* The FCC buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct fcc_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-	volatile fcc_t	*fccp;
-	volatile fcc_enet_t	*ep;
-	struct	net_device_stats stats;
-	uint	tx_free;
-	spinlock_t lock;
-
-#ifdef	CONFIG_USE_MDIO
-	uint	phy_id;
-	uint	phy_id_done;
-	uint	phy_status;
-	phy_info_t	*phy;
-	struct work_struct phy_relink;
-	struct work_struct phy_display_config;
-	struct net_device *dev;
-
-	uint	sequence_done;
-
-	uint	phy_addr;
-#endif	/* CONFIG_USE_MDIO */
-
-	int	link;
-	int	old_link;
-	int	full_duplex;
-
-	fcc_info_t	*fip;
-};
-
-static void init_fcc_shutdown(fcc_info_t *fip, struct fcc_enet_private *cep,
-	volatile cpm2_map_t *immap);
-static void init_fcc_startup(fcc_info_t *fip, struct net_device *dev);
-static void init_fcc_ioports(fcc_info_t *fip, volatile iop_cpm2_t *io,
-	volatile cpm2_map_t *immap);
-static void init_fcc_param(fcc_info_t *fip, struct net_device *dev,
-	volatile cpm2_map_t *immap);
-
-#ifdef	CONFIG_USE_MDIO
-static int	mii_queue(struct net_device *dev, int request, void (*func)(uint, struct net_device *));
-static uint	mii_send_receive(fcc_info_t *fip, uint cmd);
-static void	mii_do_cmd(struct net_device *dev, const phy_cmd_t *c);
-
-/* Make MII read/write commands for the FCC.
-*/
-#define mk_mii_read(REG)	(0x60020000 | (((REG) & 0x1f) << 18))
-#define mk_mii_write(REG, VAL)	(0x50020000 | (((REG) & 0x1f) << 18) | \
-						((VAL) & 0xffff))
-#define mk_mii_end	0
-#endif	/* CONFIG_USE_MDIO */
-
-
-static int
-fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-	volatile cbd_t	*bdp;
-
-	/* Fill in a Tx ring entry */
-	bdp = cep->cur_tx;
-
-#ifndef final_version
-	if (!cep->tx_free || (bdp->cbd_sc & BD_ENET_TX_READY)) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since the tx queue should be stopped.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags. */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* If the frame is short, tell CPM to pad it. */
-	if (skb->len <= ETH_ZLEN)
-		bdp->cbd_sc |= BD_ENET_TX_PAD;
-	else
-		bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
-	/* Set buffer length and buffer pointer. */
-	bdp->cbd_datlen = skb->len;
-	bdp->cbd_bufaddr = __pa(skb->data);
-
-	spin_lock_irq(&cep->lock);
-
-	/* Save skb pointer. */
-	cep->tx_skbuff[cep->skb_cur] = skb;
-
-	cep->stats.tx_bytes += skb->len;
-	cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	/* Send it on its way.  Tell CPM its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-#if 0
-	/* Errata says don't do this. */
-	cep->fccp->fcc_ftodr = 0x8000;
-#endif
-	dev->trans_start = jiffies;
-
-	/* If this was the last BD in the ring, start at the beginning again. */
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-		bdp = cep->tx_bd_base;
-	else
-		bdp++;
-
-	if (!--cep->tx_free)
-		netif_stop_queue(dev);
-
-	cep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&cep->lock);
-
-	return 0;
-}
-
-
-static void
-fcc_enet_timeout(struct net_device *dev)
-{
-	struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	cep->stats.tx_errors++;
-#ifndef final_version
-	{
-		int	i;
-		cbd_t	*bdp;
-		printk(" Ring data dump: cur_tx %p tx_free %d cur_rx %p.\n",
-		       cep->cur_tx, cep->tx_free,
-		       cep->cur_rx);
-		bdp = cep->tx_bd_base;
-		printk(" Tx @base %p :\n", bdp);
-		for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-		bdp = cep->rx_bd_base;
-		printk(" Rx @base %p :\n", bdp);
-		for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-	}
-#endif
-	if (cep->tx_free)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler. */
-static irqreturn_t
-fcc_enet_interrupt(int irq, void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile struct	fcc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	ushort	int_events;
-	int	must_restart;
-
-	cep = dev->priv;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	int_events = cep->fccp->fcc_fcce;
-	cep->fccp->fcc_fcce = (int_events & cep->fccp->fcc_fccm);
-	must_restart = 0;
-
-#ifdef PHY_INTERRUPT
-	/* We have to be careful here to make sure that we aren't
-	 * interrupted by a PHY interrupt.
-	 */
-	disable_irq_nosync(PHY_INTERRUPT);
-#endif
-
-	/* Handle receive event in its own function.
-	*/
-	if (int_events & FCC_ENET_RXF)
-		fcc_enet_rx(dev_id);
-
-	/* Check for a transmit error.  The manual is a little unclear
-	 * about this, so the debug code until I get it figured out.  It
-	 * appears that if TXE is set, then TXB is not set.  However,
-	 * if carrier sense is lost during frame transmission, the TXE
-	 * bit is set, "and continues the buffer transmission normally."
-	 * I don't know if "normally" implies TXB is set when the buffer
-	 * descriptor is closed.....trial and error :-).
-	 */
-
-	/* Transmit OK, or non-fatal error.  Update the buffer descriptors.
-	*/
-	if (int_events & (FCC_ENET_TXE | FCC_ENET_TXB)) {
-	    spin_lock(&cep->lock);
-	    bdp = cep->dirty_tx;
-	    while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
-		if (cep->tx_free == TX_RING_SIZE)
-		    break;
-
-		if (bdp->cbd_sc & BD_ENET_TX_HB)	/* No heartbeat */
-			cep->stats.tx_heartbeat_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_LC)	/* Late collision */
-			cep->stats.tx_window_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_RL)	/* Retrans limit */
-			cep->stats.tx_aborted_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_UN)	/* Underrun */
-			cep->stats.tx_fifo_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_CSL)	/* Carrier lost */
-			cep->stats.tx_carrier_errors++;
-
-
-		/* No heartbeat or Lost carrier are not really bad errors.
-		 * The others require a restart transmit command.
-		 */
-		if (bdp->cbd_sc &
-		    (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
-			must_restart = 1;
-			cep->stats.tx_errors++;
-		}
-
-		cep->stats.tx_packets++;
-
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			cep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit. */
-		dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
-		cep->tx_skbuff[cep->skb_dirty] = NULL;
-		cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted. */
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = cep->tx_bd_base;
-		else
-			bdp++;
-
-		/* I don't know if we can be held off from processing these
-		 * interrupts for more than one frame time.  I really hope
-		 * not.  In such a case, we would now want to check the
-		 * currently available BD (cur_tx) and determine if any
-		 * buffers between the dirty_tx and cur_tx have also been
-		 * sent.  We would want to process anything in between that
-		 * does not have BD_ENET_TX_READY set.
-		 */
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (!cep->tx_free++) {
-			if (netif_queue_stopped(dev)) {
-				netif_wake_queue(dev);
-			}
-		}
-
-		cep->dirty_tx = (cbd_t *)bdp;
-	    }
-
-	    if (must_restart) {
-		volatile cpm_cpm2_t *cp;
-
-		/* Some transmit errors cause the transmitter to shut
-		 * down.  We now issue a restart transmit.  Since the
-		 * errors close the BD and update the pointers, the restart
-		 * _should_ pick up without having to reset any of our
-		 * pointers either.  Also, To workaround 8260 device erratum
-		 * CPM37, we must disable and then re-enable the transmitter
-		 * following a Late Collision, Underrun, or Retry Limit error.
-		 */
-		cep->fccp->fcc_gfmr &= ~FCC_GFMR_ENT;
-		udelay(10); /* wait a few microseconds just on principle */
-		cep->fccp->fcc_gfmr |=  FCC_GFMR_ENT;
-
-		cp = cpmp;
-		cp->cp_cpcr =
-		    mk_cr_cmd(cep->fip->fc_cpmpage, cep->fip->fc_cpmblock,
-		    		0x0c, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	    }
-	    spin_unlock(&cep->lock);
-	}
-
-	/* Check for receive busy, i.e. packets coming but no place to
-	 * put them.
-	 */
-	if (int_events & FCC_ENET_BSY) {
-		cep->fccp->fcc_fcce = FCC_ENET_BSY;
-		cep->stats.rx_dropped++;
-	}
-
-#ifdef PHY_INTERRUPT
-	enable_irq(PHY_INTERRUPT);
-#endif
-	return IRQ_HANDLED;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-fcc_enet_rx(struct net_device *dev)
-{
-	struct	fcc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff *skb;
-	ushort	pkt_len;
-
-	cep = dev->priv;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = cep->cur_rx;
-
-for (;;) {
-	if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
-		break;
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame, both
-	 * the first and last indicators should be set.
-	 */
-	if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
-		(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
-			printk("CPM ENET: rcv is not first+last\n");
-#endif
-
-	/* Frame too long or too short. */
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
-		cep->stats.rx_length_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-		cep->stats.rx_frame_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CL)	/* Late Collision */
-		cep->stats.rx_frame_errors++;
-
-	if (!(bdp->cbd_sc &
-	      (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | BD_ENET_RX_CR
-	       | BD_ENET_RX_OV | BD_ENET_RX_CL)))
-	{
-		/* Process the incoming frame. */
-		cep->stats.rx_packets++;
-
-		/* Remove the FCS from the packet length. */
-		pkt_len = bdp->cbd_datlen - 4;
-		cep->stats.rx_bytes += pkt_len;
-
-		/* This does 16 byte alignment, much more than we need. */
-		skb = dev_alloc_skb(pkt_len);
-
-		if (skb == NULL) {
-			printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-			cep->stats.rx_dropped++;
-		}
-		else {
-			skb_put(skb,pkt_len);	/* Make room */
-			skb_copy_to_linear_data(skb,
-				(unsigned char *)__va(bdp->cbd_bufaddr),
-				pkt_len);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb);
-		}
-	}
-
-	/* Clear the status flags for this buffer. */
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty. */
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry. */
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = cep->rx_bd_base;
-	else
-		bdp++;
-
-   }
-	cep->cur_rx = (cbd_t *)bdp;
-
-	return 0;
-}
-
-static int
-fcc_enet_close(struct net_device *dev)
-{
-#ifdef	CONFIG_USE_MDIO
-	struct fcc_enet_private *fep = dev->priv;
-#endif
-
-	netif_stop_queue(dev);
-	fcc_stop(dev);
-#ifdef	CONFIG_USE_MDIO
-	if (fep->phy)
-		mii_do_cmd(dev, fep->phy->shutdown);
-#endif
-
-	return 0;
-}
-
-static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev)
-{
-	struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-
-	return &cep->stats;
-}
-
-#ifdef	CONFIG_USE_MDIO
-
-/* NOTE: Most of the following comes from the FEC driver for 860. The
- * overall structure of MII code has been retained (as it's proved stable
- * and well-tested), but actual transfer requests are processed "at once"
- * instead of being queued (there's no interrupt-driven MII transfer
- * mechanism, one has to toggle the data/clock bits manually).
- */
-static int
-mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
-{
-	struct fcc_enet_private *fep;
-	int		retval, tmp;
-
-	/* Add PHY address to register command. */
-	fep = dev->priv;
-	regval |= fep->phy_addr << 23;
-
-	retval = 0;
-
-	tmp = mii_send_receive(fep->fip, regval);
-	if (func)
-		func(tmp, dev);
-
-	return retval;
-}
-
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
-{
-	int k;
-
-	if(!c)
-		return;
-
-	for(k = 0; (c+k)->mii_data != mk_mii_end; k++)
-		mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
-}
-
-static void mii_parse_sr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
-
-	if (mii_reg & BMSR_LSTATUS)
-		s |= PHY_STAT_LINK;
-	if (mii_reg & BMSR_RFAULT)
-		s |= PHY_STAT_FAULT;
-	if (mii_reg & BMSR_ANEGCOMPLETE)
-		s |= PHY_STAT_ANC;
-
-	fep->phy_status = s;
-}
-
-static void mii_parse_cr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP);
-
-	if (mii_reg & BMCR_ANENABLE)
-		s |= PHY_CONF_ANE;
-	if (mii_reg & BMCR_LOOPBACK)
-		s |= PHY_CONF_LOOP;
-
-	fep->phy_status = s;
-}
-
-static void mii_parse_anar(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_CONF_SPMASK);
-
-	if (mii_reg & ADVERTISE_10HALF)
-		s |= PHY_CONF_10HDX;
-	if (mii_reg & ADVERTISE_10FULL)
-		s |= PHY_CONF_10FDX;
-	if (mii_reg & ADVERTISE_100HALF)
-		s |= PHY_CONF_100HDX;
-	if (mii_reg & ADVERTISE_100FULL)
-		s |= PHY_CONF_100FDX;
-
-	fep->phy_status = s;
-}
-
-/* ------------------------------------------------------------------------- */
-/* Generic PHY support.  Should work for all PHYs, but does not support link
- * change interrupts.
- */
-#ifdef CONFIG_FCC_GENERIC_PHY
-
-static phy_info_t phy_info_generic = {
-	0x00000000, /* 0-->match any PHY */
-	"GENERIC",
-
-	(const phy_cmd_t []) {  /* config */
-		/* advertise only half-duplex capabilities */
-		{ mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_HALF),
-			mii_parse_anar },
-
-		/* enable auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup */
-		/* restart auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART),
-			NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* We don't actually use the ack_int table with a generic
-		 * PHY, but putting a reference to mii_parse_sr here keeps
-		 * us from getting a compiler warning about unused static
-		 * functions in the case where we only compile in generic
-		 * PHY support.
-		 */
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown */
-		{ mk_mii_end, }
-	},
-};
-#endif	/* ifdef CONFIG_FCC_GENERIC_PHY */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT970 is used by many boards				     */
-
-#ifdef CONFIG_FCC_LXT970
-
-#define MII_LXT970_MIRROR    16  /* Mirror register           */
-#define MII_LXT970_IER       17  /* Interrupt Enable Register */
-#define MII_LXT970_ISR       18  /* Interrupt Status Register */
-#define MII_LXT970_CONFIG    19  /* Configuration Register    */
-#define MII_LXT970_CSR       20  /* Chip Status Register      */
-
-static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x0800) {
-		if (mii_reg & 0x1000)
-			s |= PHY_STAT_100FDX;
-		else
-			s |= PHY_STAT_100HDX;
-	} else {
-		if (mii_reg & 0x1000)
-			s |= PHY_STAT_10FDX;
-		else
-			s |= PHY_STAT_10HDX;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_lxt970 = {
-	0x07810000,
-	"LXT970",
-
-	(const phy_cmd_t []) {  /* config */
-#if 0
-//		{ mk_mii_write(MII_ADVERTISE, 0x0021), NULL },
-
-		/* Set default operation of 100-TX....for some reason
-		 * some of these bits are set on power up, which is wrong.
-		 */
-		{ mk_mii_write(MII_LXT970_CONFIG, 0), NULL },
-#endif
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
-		{ mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* read SR and ISR to acknowledge */
-
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT970_ISR), NULL },
-
-		/* find out the current status */
-
-		{ mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT971 is used on some of my custom boards                  */
-
-#ifdef CONFIG_FCC_LXT971
-
-/* register definitions for the 971 */
-
-#define MII_LXT971_PCR       16  /* Port Control Register     */
-#define MII_LXT971_SR2       17  /* Status Register 2         */
-#define MII_LXT971_IER       18  /* Interrupt Enable Register */
-#define MII_LXT971_ISR       19  /* Interrupt Status Register */
-#define MII_LXT971_LCR       20  /* LED Control Register      */
-#define MII_LXT971_TCR       30  /* Transmit Control Register */
-
-/*
- * I had some nice ideas of running the MDIO faster...
- * The 971 should support 8MHz and I tried it, but things acted really
- * weird, so 2.5 MHz ought to be enough for anyone...
- */
-
-static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x4000) {
-		if (mii_reg & 0x0200)
-			s |= PHY_STAT_100FDX;
-		else
-			s |= PHY_STAT_100HDX;
-	} else {
-		if (mii_reg & 0x0200)
-			s |= PHY_STAT_10FDX;
-		else
-			s |= PHY_STAT_10HDX;
-	}
-	if (mii_reg & 0x0008)
-		s |= PHY_STAT_FAULT;
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_lxt971 = {
-	0x0001378e,
-	"LXT971",
-
-	(const phy_cmd_t []) {  /* config */
-		/* configure link capabilities to advertise */
-		{ mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_DEFAULT),
-			mii_parse_anar },
-
-		/* enable auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
-
-		/* restart auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART),
-			NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* find out the current status */
-		{ mk_mii_read(MII_BMSR), NULL },
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
-
-		/* we only need to read ISR to acknowledge */
-		{ mk_mii_read(MII_LXT971_ISR), NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FCC_LXT971 */
-
-/* ------------------------------------------------------------------------- */
-/* The Quality Semiconductor QS6612 is used on the RPX CLLF                  */
-
-#ifdef CONFIG_FCC_QS6612
-
-/* register definitions */
-
-#define MII_QS6612_MCR       17  /* Mode Control Register      */
-#define MII_QS6612_FTR       27  /* Factory Test Register      */
-#define MII_QS6612_MCO       28  /* Misc. Control Register     */
-#define MII_QS6612_ISR       29  /* Interrupt Source Register  */
-#define MII_QS6612_IMR       30  /* Interrupt Mask Register    */
-#define MII_QS6612_PCR       31  /* 100BaseTx PHY Control Reg. */
-
-static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	switch((mii_reg >> 2) & 7) {
-	case 1: s |= PHY_STAT_10HDX;  break;
-	case 2: s |= PHY_STAT_100HDX; break;
-	case 5: s |= PHY_STAT_10FDX;  break;
-	case 6: s |= PHY_STAT_100FDX; break;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_qs6612 = {
-	0x00181440,
-	"QS6612",
-
-	(const phy_cmd_t []) {  /* config */
-//	{ mk_mii_write(MII_ADVERTISE, 0x061), NULL }, /* 10  Mbps */
-
-		/* The PHY powers up isolated on the RPX,
-		 * so send a command to allow operation.
-		 */
-
-		{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
-
-		/* parse cr and anar to get some info */
-
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
-		{ mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-
-		/* we need to read ISR, SR and ANER to acknowledge */
-
-		{ mk_mii_read(MII_QS6612_ISR), NULL },
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_EXPANSION), NULL },
-
-		/* read pcr to get info */
-
-		{ mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-
-#endif /* CONFIG_FEC_QS6612 */
-
-
-/* ------------------------------------------------------------------------- */
-/* The Davicom DM9131 is used on the HYMOD board			     */
-
-#ifdef CONFIG_FCC_DM9131
-
-/* register definitions */
-
-#define MII_DM9131_ACR		16	/* Aux. Config Register		*/
-#define MII_DM9131_ACSR		17	/* Aux. Config/Status Register	*/
-#define MII_DM9131_10TCSR	18	/* 10BaseT Config/Status Reg.	*/
-#define MII_DM9131_INTR		21	/* Interrupt Register		*/
-#define MII_DM9131_RECR		22	/* Receive Error Counter Reg.	*/
-#define MII_DM9131_DISCR	23	/* Disconnect Counter Register	*/
-
-static void mii_parse_dm9131_acsr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	switch ((mii_reg >> 12) & 0xf) {
-	case 1: s |= PHY_STAT_10HDX;  break;
-	case 2: s |= PHY_STAT_10FDX;  break;
-	case 4: s |= PHY_STAT_100HDX; break;
-	case 8: s |= PHY_STAT_100FDX; break;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_dm9131 = {
-	0x00181b80,
-	"DM9131",
-
-	(const phy_cmd_t []) {  /* config */
-		/* parse cr and anar to get some info */
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_DM9131_INTR, 0x0002), NULL },
-		{ mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-
-		/* we need to read INTR, SR and ANER to acknowledge */
-
-		{ mk_mii_read(MII_DM9131_INTR), NULL },
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_EXPANSION), NULL },
-
-		/* read acsr to get info */
-
-		{ mk_mii_read(MII_DM9131_ACSR), mii_parse_dm9131_acsr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_DM9131_INTR, 0x0f00), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-
-#endif /* CONFIG_FEC_DM9131 */
-#ifdef CONFIG_FCC_DM9161
-/* ------------------------------------------------------------------------- */
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP     0x0400
-#define MIIM_DM9161_CR_RSTAN    0x1200
-
-#define MIIM_DM9161_SCR         0x10
-#define MIIM_DM9161_SCR_INIT    0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR        0x11
-#define MIIM_DM9161_SCSR_100F   0x8000
-#define MIIM_DM9161_SCSR_100H   0x4000
-#define MIIM_DM9161_SCSR_10F    0x2000
-#define MIIM_DM9161_SCSR_10H    0x1000
-/* DM9161 10BT register */
-#define MIIM_DM9161_10BTCSR 	0x12
-#define MIIM_DM9161_10BTCSR_INIT 0x7800
-/* DM9161 Interrupt Register */
-#define MIIM_DM9161_INTR        0x15
-#define MIIM_DM9161_INTR_PEND           0x8000
-#define MIIM_DM9161_INTR_DPLX_MASK      0x0800
-#define MIIM_DM9161_INTR_SPD_MASK       0x0400
-#define MIIM_DM9161_INTR_LINK_MASK      0x0200
-#define MIIM_DM9161_INTR_MASK           0x0100
-#define MIIM_DM9161_INTR_DPLX_CHANGE    0x0010
-#define MIIM_DM9161_INTR_SPD_CHANGE     0x0008
-#define MIIM_DM9161_INTR_LINK_CHANGE    0x0004
-#define MIIM_DM9161_INTR_INIT           0x0000
-#define MIIM_DM9161_INTR_STOP   \
-(MIIM_DM9161_INTR_DPLX_MASK | MIIM_DM9161_INTR_SPD_MASK \
-  | MIIM_DM9161_INTR_LINK_MASK | MIIM_DM9161_INTR_MASK)
-
-static void mii_parse_dm9161_sr(uint mii_reg, struct net_device * dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint regstat,  timeout=0xffff;
-
-	while(!(mii_reg & 0x0020) && timeout--)
-	{
-		regstat=mk_mii_read(MII_BMSR);
-	        regstat |= fep->phy_addr <<23;
-	        mii_reg = mii_send_receive(fep->fip,regstat);
-	}
-
-	mii_parse_sr(mii_reg, dev);
-}
-
-static void mii_parse_dm9161_scsr(uint mii_reg, struct net_device * dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-	switch((mii_reg >>12) & 0xf) {
-		case 1:
-		{
-			s |= PHY_STAT_10HDX;
-			printk("10BaseT Half Duplex\n");
-			break;
-		}
-		case 2:
-		{
-			s |= PHY_STAT_10FDX;
-		        printk("10BaseT Full Duplex\n");
-			break;
-		}
-		case 4:
-	        {
-			s |= PHY_STAT_100HDX;
-		        printk("100BaseT Half Duplex\n");
-			break;
-		}
-		case 8:
-		{
-			s |= PHY_STAT_100FDX;
-			printk("100BaseT Full Duplex\n");
-			break;
-		}
-	}
-
-	fep->phy_status = s;
-
-}
-
-static void mii_dm9161_wait(uint mii_reg, struct net_device *dev)
-{
-	int timeout = HZ;
-
-	/* Davicom takes a bit to come up after a reset,
-	 * so wait here for a bit */
-	schedule_timeout_uninterruptible(timeout);
-}
-
-static phy_info_t phy_info_dm9161 = {
-        0x00181b88,
-        "Davicom DM9161E",
-        (const phy_cmd_t[]) { /* config */
-                { mk_mii_write(MII_BMCR, MIIM_DM9161_CR_STOP), NULL},
-                /* Do not bypass the scrambler/descrambler */
-                { mk_mii_write(MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT), NULL},
-		/* Configure 10BTCSR register */
-		{ mk_mii_write(MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT),NULL},
-                /* Configure some basic stuff */
-                { mk_mii_write(MII_BMCR, 0x1000), NULL},
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end,}
-        },
-       (const phy_cmd_t[]) { /* startup */
-                /* Restart Auto Negotiation */
-                { mk_mii_write(MII_BMCR, MIIM_DM9161_CR_RSTAN), NULL},
-                /* Status is read once to clear old link state */
-                { mk_mii_read(MII_BMSR), mii_dm9161_wait},
-                /* Auto-negotiate */
-                { mk_mii_read(MII_BMSR), mii_parse_dm9161_sr},
-                /* Read the status */
-                { mk_mii_read(MIIM_DM9161_SCSR), mii_parse_dm9161_scsr},
-                /* Clear any pending interrupts */
-                { mk_mii_read(MIIM_DM9161_INTR), NULL},
-                /* Enable Interrupts */
-                { mk_mii_write(MIIM_DM9161_INTR, MIIM_DM9161_INTR_INIT), NULL},
-                { mk_mii_end,}
-        },
-       (const phy_cmd_t[]) { /* ack_int */
-                { mk_mii_read(MIIM_DM9161_INTR), NULL},
-#if 0
-		{ mk_mii_read(MII_BMSR), NULL},
-		{ mk_mii_read(MII_BMSR), mii_parse_dm9161_sr},
-		{ mk_mii_read(MIIM_DM9161_SCSR), mii_parse_dm9161_scsr},
-#endif
-                { mk_mii_end,}
-        },
-        (const phy_cmd_t[]) { /* shutdown */
-	        { mk_mii_read(MIIM_DM9161_INTR),NULL},
-                { mk_mii_write(MIIM_DM9161_INTR, MIIM_DM9161_INTR_STOP), NULL},
-	        { mk_mii_end,}
-	},
-};
-#endif /* CONFIG_FCC_DM9161 */
-
-static phy_info_t *phy_info[] = {
-
-#ifdef CONFIG_FCC_LXT970
-	&phy_info_lxt970,
-#endif /* CONFIG_FEC_LXT970 */
-
-#ifdef CONFIG_FCC_LXT971
-	&phy_info_lxt971,
-#endif /* CONFIG_FEC_LXT971 */
-
-#ifdef CONFIG_FCC_QS6612
-	&phy_info_qs6612,
-#endif /* CONFIG_FEC_QS6612 */
-
-#ifdef CONFIG_FCC_DM9131
-	&phy_info_dm9131,
-#endif /* CONFIG_FEC_DM9131 */
-
-#ifdef CONFIG_FCC_DM9161
-	&phy_info_dm9161,
-#endif /* CONFIG_FCC_DM9161 */
-
-#ifdef CONFIG_FCC_GENERIC_PHY
-	/* Generic PHY support.  This must be the last PHY in the table.
-	 * It will be used to support any PHY that doesn't match a previous
-	 * entry in the table.
-	 */
-	&phy_info_generic,
-#endif /* CONFIG_FCC_GENERIC_PHY */
-
-	NULL
-};
-
-static void mii_display_status(struct work_struct *work)
-{
-	volatile struct fcc_enet_private *fep =
-		container_of(work, struct fcc_enet_private, phy_relink);
-	struct net_device *dev = fep->dev;
-	uint s = fep->phy_status;
-
-	if (!fep->link && !fep->old_link) {
-		/* Link is still down - don't print anything */
-		return;
-	}
-
-	printk("%s: status: ", dev->name);
-
-	if (!fep->link) {
-		printk("link down");
-	} else {
-		printk("link up");
-
-		switch(s & PHY_STAT_SPMASK) {
-		case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break;
-		case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break;
-		case PHY_STAT_10FDX:  printk(", 10 Mbps Full Duplex");  break;
-		case PHY_STAT_10HDX:  printk(", 10 Mbps Half Duplex");  break;
-		default:
-			printk(", Unknown speed/duplex");
-		}
-
-		if (s & PHY_STAT_ANC)
-			printk(", auto-negotiation complete");
-	}
-
-	if (s & PHY_STAT_FAULT)
-		printk(", remote fault");
-
-	printk(".\n");
-}
-
-static void mii_display_config(struct work_struct *work)
-{
-	volatile struct fcc_enet_private *fep =
-		container_of(work, struct fcc_enet_private,
-			     phy_display_config);
-	struct net_device *dev = fep->dev;
-	uint s = fep->phy_status;
-
-	printk("%s: config: auto-negotiation ", dev->name);
-
-	if (s & PHY_CONF_ANE)
-		printk("on");
-	else
-		printk("off");
-
-	if (s & PHY_CONF_100FDX)
-		printk(", 100FDX");
-	if (s & PHY_CONF_100HDX)
-		printk(", 100HDX");
-	if (s & PHY_CONF_10FDX)
-		printk(", 10FDX");
-	if (s & PHY_CONF_10HDX)
-		printk(", 10HDX");
-	if (!(s & PHY_CONF_SPMASK))
-		printk(", No speed/duplex selected?");
-
-	if (s & PHY_CONF_LOOP)
-		printk(", loopback enabled");
-
-	printk(".\n");
-
-	fep->sequence_done = 1;
-}
-
-static void mii_relink(struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-	int duplex = 0;
-
-	fep->old_link = fep->link;
-	fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
-
-#ifdef MDIO_DEBUG
-	printk("  mii_relink:  link=%d\n", fep->link);
-#endif
-
-	if (fep->link) {
-		if (fep->phy_status
-		    & (PHY_STAT_100FDX | PHY_STAT_10FDX))
-			duplex = 1;
-		fcc_restart(dev, duplex);
-#ifdef MDIO_DEBUG
-		printk("  mii_relink:  duplex=%d\n", duplex);
-#endif
-	}
-}
-
-static void mii_queue_relink(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-
-	mii_relink(dev);
-
-	schedule_work(&fep->phy_relink);
-}
-
-static void mii_queue_config(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-
-	schedule_work(&fep->phy_display_config);
-}
-
-phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_BMCR), mii_queue_relink },
-			       { mk_mii_end, } };
-phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_BMCR), mii_queue_config },
-			       { mk_mii_end, } };
-
-
-/* Read remainder of PHY ID.
-*/
-static void
-mii_discover_phy3(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep;
-	int	i;
-
-	fep = dev->priv;
-	printk("mii_reg: %08x\n", mii_reg);
-	fep->phy_id |= (mii_reg & 0xffff);
-
-	for(i = 0; phy_info[i]; i++)
-		if((phy_info[i]->id == (fep->phy_id >> 4)) || !phy_info[i]->id)
-			break;
-
-	if(!phy_info[i])
-		panic("%s: PHY id 0x%08x is not supported!\n",
-		      dev->name, fep->phy_id);
-
-	fep->phy = phy_info[i];
-	fep->phy_id_done = 1;
-
-	printk("%s: Phy @ 0x%x, type %s (0x%08x)\n",
-		dev->name, fep->phy_addr, fep->phy->name, fep->phy_id);
-}
-
-/* Scan all of the MII PHY addresses looking for someone to respond
- * with a valid ID.  This usually happens quickly.
- */
-static void
-mii_discover_phy(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep;
-	uint	phytype;
-
-	fep = dev->priv;
-
-	if ((phytype = (mii_reg & 0xffff)) != 0xffff) {
-
-		/* Got first part of ID, now get remainder. */
-		fep->phy_id = phytype << 16;
-		mii_queue(dev, mk_mii_read(MII_PHYSID2), mii_discover_phy3);
-	} else {
-		fep->phy_addr++;
-		if (fep->phy_addr < 32) {
-			mii_queue(dev, mk_mii_read(MII_PHYSID1),
-							mii_discover_phy);
-		} else {
-			printk("fec: No PHY device found.\n");
-		}
-	}
-}
-#endif	/* CONFIG_USE_MDIO */
-
-#ifdef PHY_INTERRUPT
-/* This interrupt occurs when the PHY detects a link change. */
-static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id)
-{
-	struct	net_device *dev = dev_id;
-	struct fcc_enet_private *fep = dev->priv;
-	fcc_info_t *fip = fep->fip;
-
-	if (fep->phy) {
-		/* We don't want to be interrupted by an FCC
-		 * interrupt here.
-		 */
-		disable_irq_nosync(fip->fc_interrupt);
-
-		mii_do_cmd(dev, fep->phy->ack_int);
-		/* restart and display status */
-		mii_do_cmd(dev, phy_cmd_relink);
-
-		enable_irq(fip->fc_interrupt);
-	}
-	return IRQ_HANDLED;
-}
-#endif	/* ifdef PHY_INTERRUPT */
-
-#if 0 /* This should be fixed someday */
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
-	struct	fcc_enet_private *cep;
-	struct	dev_mc_list *dmi;
-	u_char	*mcptr, *tdptr;
-	volatile fcc_enet_t *ep;
-	int	i, j;
-
-	cep = (struct fcc_enet_private *)dev->priv;
-
-return;
-	/* Get pointer to FCC area in parameter RAM.
-	*/
-	ep = (fcc_enet_t *)dev->base_addr;
-
-	if (dev->flags&IFF_PROMISC) {
-	
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->fccp->fcc_fpsmr |= FCC_PSMR_PRO;
-	} else {
-
-		cep->fccp->fcc_fpsmr &= ~FCC_PSMR_PRO;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->fen_gaddrh = 0xffffffff;
-			ep->fen_gaddrl = 0xffffffff;
-		}
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->fen_gaddrh = 0;
-			ep->fen_gaddrl = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++, dmi = dmi->next) {
-
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->fen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(cep->fip->fc_cpmpage,
-						cep->fip->fc_cpmblock, 0x0c,
-						CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-	}
-}
-#endif /* if 0 */
-
-
-/* Set the individual MAC address.
- */
-int fcc_enet_set_mac_address(struct net_device *dev, void *p)
-{
-	struct sockaddr *addr= (struct sockaddr *) p;
-	struct fcc_enet_private *cep;
-	volatile fcc_enet_t *ep;
-	unsigned char *eap;
-	int i;
-
-	cep = (struct fcc_enet_private *)(dev->priv);
-	ep = cep->ep;
-
-        if (netif_running(dev))
-                return -EBUSY;
-
-        memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
-	eap = (unsigned char *) &(ep->fen_paddrh);
-	for (i=5; i>=0; i--)
-		*eap++ = addr->sa_data[i];
-
-        return 0;
-}
-
-
-/* Initialize the CPM Ethernet on FCC.
- */
-static int __init fec_enet_init(void)
-{
-	struct net_device *dev;
-	struct fcc_enet_private *cep;
-	fcc_info_t	*fip;
-	int	i, np, err;
-	volatile	cpm2_map_t		*immap;
-	volatile	iop_cpm2_t	*io;
-
-	immap = (cpm2_map_t *)CPM_MAP_ADDR;	/* and to internal registers */
-	io = &immap->im_ioport;
-
-	np = sizeof(fcc_ports) / sizeof(fcc_info_t);
-	fip = fcc_ports;
-
-	while (np-- > 0) {
-		/* Create an Ethernet device instance.
-		*/
-		dev = alloc_etherdev(sizeof(*cep));
-		if (!dev)
-			return -ENOMEM;
-
-		cep = dev->priv;
-		spin_lock_init(&cep->lock);
-		cep->fip = fip;
-
-		init_fcc_shutdown(fip, cep, immap);
-		init_fcc_ioports(fip, io, immap);
-		init_fcc_param(fip, dev, immap);
-
-		dev->base_addr = (unsigned long)(cep->ep);
-
-		/* The CPM Ethernet specific entries in the device
-		 * structure.
-		 */
-		dev->open = fcc_enet_open;
-		dev->hard_start_xmit = fcc_enet_start_xmit;
-		dev->tx_timeout = fcc_enet_timeout;
-		dev->watchdog_timeo = TX_TIMEOUT;
-		dev->stop = fcc_enet_close;
-		dev->get_stats = fcc_enet_get_stats;
-		/* dev->set_multicast_list = set_multicast_list; */
-		dev->set_mac_address = fcc_enet_set_mac_address;
-
-		init_fcc_startup(fip, dev);
-
-		err = register_netdev(dev);
-		if (err) {
-			free_netdev(dev);
-			return err;
-		}
-
-		printk("%s: FCC ENET Version 0.3, ", dev->name);
-		for (i=0; i<5; i++)
-			printk("%02x:", dev->dev_addr[i]);
-		printk("%02x\n", dev->dev_addr[5]);
-
-#ifdef	CONFIG_USE_MDIO
-		/* Queue up command to detect the PHY and initialize the
-	 	* remainder of the interface.
-	 	*/
-		cep->phy_id_done = 0;
-		cep->phy_addr = fip->fc_phyaddr;
-		mii_queue(dev, mk_mii_read(MII_PHYSID1), mii_discover_phy);
-		INIT_WORK(&cep->phy_relink, mii_display_status);
-		INIT_WORK(&cep->phy_display_config, mii_display_config);
-		cep->dev = dev;
-#endif	/* CONFIG_USE_MDIO */
-
-		fip++;
-	}
-
-	return 0;
-}
-module_init(fec_enet_init);
-
-/* Make sure the device is shut down during initialization.
-*/
-static void __init
-init_fcc_shutdown(fcc_info_t *fip, struct fcc_enet_private *cep,
-						volatile cpm2_map_t *immap)
-{
-	volatile	fcc_enet_t	*ep;
-	volatile	fcc_t		*fccp;
-
-	/* Get pointer to FCC area in parameter RAM.
-	*/
-	ep = (fcc_enet_t *)(&immap->im_dprambase[fip->fc_proff]);
-
-	/* And another to the FCC register area.
-	*/
-	fccp = (volatile fcc_t *)(&immap->im_fcc[fip->fc_fccnum]);
-	cep->fccp = fccp;		/* Keep the pointers handy */
-	cep->ep = ep;
-
-	/* Disable receive and transmit in case someone left it running.
-	*/
-	fccp->fcc_gfmr &= ~(FCC_GFMR_ENR | FCC_GFMR_ENT);
-}
-
-/* Initialize the I/O pins for the FCC Ethernet.
-*/
-static void __init
-init_fcc_ioports(fcc_info_t *fip, volatile iop_cpm2_t *io,
-						volatile cpm2_map_t *immap)
-{
-
-	/* FCC1 pins are on port A/C.  FCC2/3 are port B/C.
-	*/
-	if (fip->fc_proff == PROFF_FCC1) {
-		/* Configure port A and C pins for FCC1 Ethernet.
-		 */
-		io->iop_pdira &= ~PA1_DIRA_BOUT;
-		io->iop_pdira |= PA1_DIRA_BIN;
-		io->iop_psora &= ~PA1_PSORA_BOUT;
-		io->iop_psora |= PA1_PSORA_BIN;
-		io->iop_ppara |= (PA1_DIRA_BOUT | PA1_DIRA_BIN);
-	}
-	if (fip->fc_proff == PROFF_FCC2) {
-		/* Configure port B and C pins for FCC Ethernet.
-		 */
-		io->iop_pdirb &= ~PB2_DIRB_BOUT;
-		io->iop_pdirb |= PB2_DIRB_BIN;
-		io->iop_psorb &= ~PB2_PSORB_BOUT;
-		io->iop_psorb |= PB2_PSORB_BIN;
-		io->iop_pparb |= (PB2_DIRB_BOUT | PB2_DIRB_BIN);
-	}
-	if (fip->fc_proff == PROFF_FCC3) {
-		/* Configure port B and C pins for FCC Ethernet.
-		 */
-		io->iop_pdirb &= ~PB3_DIRB_BOUT;
-		io->iop_pdirb |= PB3_DIRB_BIN;
-		io->iop_psorb &= ~PB3_PSORB_BOUT;
-		io->iop_psorb |= PB3_PSORB_BIN;
-		io->iop_pparb |= (PB3_DIRB_BOUT | PB3_DIRB_BIN);
-
-		io->iop_pdirc &= ~PC3_DIRC_BOUT;
-		io->iop_pdirc |= PC3_DIRC_BIN;
-		io->iop_psorc &= ~PC3_PSORC_BOUT;
-		io->iop_psorc |= PC3_PSORC_BIN;
-		io->iop_pparc |= (PC3_DIRC_BOUT | PC3_DIRC_BIN);
-
-	}
-
-	/* Port C has clocks......
-	*/
-	io->iop_psorc &= ~(fip->fc_trxclocks);
-	io->iop_pdirc &= ~(fip->fc_trxclocks);
-	io->iop_pparc |= fip->fc_trxclocks;
-
-#ifdef	CONFIG_USE_MDIO
-	/* ....and the MII serial clock/data.
-	*/
-	io->iop_pdatc |= (fip->fc_mdio | fip->fc_mdck);
-	io->iop_podrc &= ~(fip->fc_mdio | fip->fc_mdck);
-	io->iop_pdirc |= (fip->fc_mdio | fip->fc_mdck);
-	io->iop_pparc &= ~(fip->fc_mdio | fip->fc_mdck);
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all FCC bits to zero,
-	 * then set the ones we want.
-	 */
-	immap->im_cpmux.cmx_fcr &= ~(fip->fc_clockmask);
-	immap->im_cpmux.cmx_fcr |= fip->fc_clockroute;
-}
-
-static void __init
-init_fcc_param(fcc_info_t *fip, struct net_device *dev,
-						volatile cpm2_map_t *immap)
-{
-	unsigned char	*eap;
-	unsigned long	mem_addr;
-	bd_t		*bd;
-	int		i, j;
-	struct		fcc_enet_private *cep;
-	volatile	fcc_enet_t	*ep;
-	volatile	cbd_t		*bdp;
-	volatile	cpm_cpm2_t	*cp;
-
-	cep = (struct fcc_enet_private *)(dev->priv);
-	ep = cep->ep;
-	cp = cpmp;
-
-	bd = (bd_t *)__res;
-
-	/* Zero the whole thing.....I must have missed some individually.
-	 * It works when I do this.
-	 */
-	memset((char *)ep, 0, sizeof(fcc_enet_t));
-
-	/* Allocate space for the buffer descriptors from regular memory.
-	 * Initialize base addresses for the buffer descriptors.
-	 */
-	cep->rx_bd_base = kmalloc(sizeof(cbd_t) * RX_RING_SIZE,
-			GFP_KERNEL | GFP_DMA);
-	ep->fen_genfcc.fcc_rbase = __pa(cep->rx_bd_base);
-	cep->tx_bd_base = kmalloc(sizeof(cbd_t) * TX_RING_SIZE,
-			GFP_KERNEL | GFP_DMA);
-	ep->fen_genfcc.fcc_tbase = __pa(cep->tx_bd_base);
-
-	cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
-	cep->cur_rx = cep->rx_bd_base;
-
-	ep->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
-	ep->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
-
-	/* Set maximum bytes per receive buffer.
-	 * It must be a multiple of 32.
-	 */
-	ep->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
-
-	/* Allocate space in the reserved FCC area of DPRAM for the
-	 * internal buffers.  No one uses this space (yet), so we
-	 * can do this.  Later, we will add resource management for
-	 * this area.
-	 */
-	mem_addr = CPM_FCC_SPECIAL_BASE + (fip->fc_fccnum * 128);
-	ep->fen_genfcc.fcc_riptr = mem_addr;
-	ep->fen_genfcc.fcc_tiptr = mem_addr+32;
-	ep->fen_padptr = mem_addr+64;
-	memset((char *)(&(immap->im_dprambase[(mem_addr+64)])), 0x88, 32);
-
-	ep->fen_genfcc.fcc_rbptr = 0;
-	ep->fen_genfcc.fcc_tbptr = 0;
-	ep->fen_genfcc.fcc_rcrc = 0;
-	ep->fen_genfcc.fcc_tcrc = 0;
-	ep->fen_genfcc.fcc_res1 = 0;
-	ep->fen_genfcc.fcc_res2 = 0;
-
-	ep->fen_camptr = 0;	/* CAM isn't used in this driver */
-
-	/* Set CRC preset and mask.
-	*/
-	ep->fen_cmask = 0xdebb20e3;
-	ep->fen_cpres = 0xffffffff;
-
-	ep->fen_crcec = 0;	/* CRC Error counter */
-	ep->fen_alec = 0;	/* alignment error counter */
-	ep->fen_disfc = 0;	/* discard frame counter */
-	ep->fen_retlim = 15;	/* Retry limit threshold */
-	ep->fen_pper = 0;	/* Normal persistence */
-
-	/* Clear hash filter tables.
-	*/
-	ep->fen_gaddrh = 0;
-	ep->fen_gaddrl = 0;
-	ep->fen_iaddrh = 0;
-	ep->fen_iaddrl = 0;
-
-	/* Clear the Out-of-sequence TxBD.
-	*/
-	ep->fen_tfcstat = 0;
-	ep->fen_tfclen = 0;
-	ep->fen_tfcptr = 0;
-
-	ep->fen_mflr = PKT_MAXBUF_SIZE;   /* maximum frame length register */
-	ep->fen_minflr = PKT_MINBUF_SIZE;  /* minimum frame length register */
-
-	/* Set Ethernet station address.
-	 *
-	 * This is supplied in the board information structure, so we
-	 * copy that into the controller.
-	 * So, far we have only been given one Ethernet address. We make
-	 * it unique by setting a few bits in the upper byte of the
-	 * non-static part of the address.
-	 */
-	eap = (unsigned char *)&(ep->fen_paddrh);
-	for (i=5; i>=0; i--) {
-
-/*
- * The EP8260 only uses FCC3, so we can safely give it the real
- * MAC address.
- */
-#ifdef CONFIG_SBC82xx
-		if (i == 5) {
-			/* bd->bi_enetaddr holds the SCC0 address; the FCC
-			   devices count up from there */
-			dev->dev_addr[i] = bd->bi_enetaddr[i] & ~3;
-			dev->dev_addr[i] += 1 + fip->fc_fccnum;
-			*eap++ = dev->dev_addr[i];
-		}
-#else
-#ifndef CONFIG_RPX8260
-		if (i == 3) {
-			dev->dev_addr[i] = bd->bi_enetaddr[i];
-			dev->dev_addr[i] |= (1 << (7 - fip->fc_fccnum));
-			*eap++ = dev->dev_addr[i];
-		} else
-#endif
-		{
-			*eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
-		}
-#endif
-	}
-
-	ep->fen_taddrh = 0;
-	ep->fen_taddrm = 0;
-	ep->fen_taddrl = 0;
-
-	ep->fen_maxd1 = PKT_MAXDMA_SIZE;	/* maximum DMA1 length */
-	ep->fen_maxd2 = PKT_MAXDMA_SIZE;	/* maximum DMA2 length */
-
-	/* Clear stat counters, in case we ever enable RMON.
-	*/
-	ep->fen_octc = 0;
-	ep->fen_colc = 0;
-	ep->fen_broc = 0;
-	ep->fen_mulc = 0;
-	ep->fen_uspc = 0;
-	ep->fen_frgc = 0;
-	ep->fen_ospc = 0;
-	ep->fen_jbrc = 0;
-	ep->fen_p64c = 0;
-	ep->fen_p65c = 0;
-	ep->fen_p128c = 0;
-	ep->fen_p256c = 0;
-	ep->fen_p512c = 0;
-	ep->fen_p1024c = 0;
-
-	ep->fen_rfthr = 0;	/* Suggested by manual */
-	ep->fen_rfcnt = 0;
-	ep->fen_cftype = 0;
-
-	/* Now allocate the host memory pages and initialize the
-	 * buffer descriptors.
-	 */
-	bdp = cep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_datlen = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	bdp = cep->rx_bd_base;
-	for (i=0; i<FCC_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		mem_addr = __get_free_page(GFP_KERNEL);
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<FCC_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
-			bdp->cbd_datlen = 0;
-			bdp->cbd_bufaddr = __pa(mem_addr);
-			mem_addr += FCC_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Let's re-initialize the channel now.  We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock, 0x0c,
-			CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	cep->skb_cur = cep->skb_dirty = 0;
-}
-
-/* Let 'er rip.
-*/
-static void __init
-init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
-{
-	volatile fcc_t	*fccp;
-	struct fcc_enet_private *cep;
-
-	cep = (struct fcc_enet_private *)(dev->priv);
-	fccp = cep->fccp;
-
-#ifdef CONFIG_RPX8260
-#ifdef PHY_INTERRUPT
-	/* Route PHY interrupt to IRQ.  The following code only works for
-	 * IRQ1 - IRQ7.  It does not work for Port C interrupts.
-	 */
-	*((volatile u_char *) (RPX_CSR_ADDR + 13)) &= ~BCSR13_FETH_IRQMASK;
-	*((volatile u_char *) (RPX_CSR_ADDR + 13)) |=
-		((PHY_INTERRUPT - SIU_INT_IRQ1 + 1) << 4);
-#endif
-	/* Initialize MDIO pins. */
-	*((volatile u_char *) (RPX_CSR_ADDR + 4)) &= ~BCSR4_MII_MDC;
-	*((volatile u_char *) (RPX_CSR_ADDR + 4)) |=
-		BCSR4_MII_READ | BCSR4_MII_MDIO;
-	/* Enable external LXT971 PHY. */
-	*((volatile u_char *) (RPX_CSR_ADDR + 4)) |= BCSR4_EN_PHY;
-	udelay(1000);
-	*((volatile u_char *) (RPX_CSR_ADDR+ 4)) |= BCSR4_EN_MII;
-	udelay(1000);
-#endif	/* ifdef CONFIG_RPX8260 */
-
-	fccp->fcc_fcce = 0xffff;	/* Clear any pending events */
-
-	/* Leave FCC interrupts masked for now.  Will be unmasked by
-	 * fcc_restart().
-	 */
-	fccp->fcc_fccm = 0;
-
-	/* Install our interrupt handler.
-	*/
-	if (request_irq(fip->fc_interrupt, fcc_enet_interrupt, 0, "fenet",
-				dev) < 0)
-		printk("Can't get FCC IRQ %d\n", fip->fc_interrupt);
-
-#ifdef	PHY_INTERRUPT
-	/* Make IRQn edge triggered.  This does not work if PHY_INTERRUPT is
-	 * on Port C.
-	 */
-	((volatile cpm2_map_t *) CPM_MAP_ADDR)->im_intctl.ic_siexr |=
-		(1 << (14 - (PHY_INTERRUPT - SIU_INT_IRQ1)));
-
-	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0,
-							"mii", dev) < 0)
-		printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
-#endif	/* PHY_INTERRUPT */
-
-	/* Set GFMR to enable Ethernet operating mode.
-	 */
-	fccp->fcc_gfmr = (FCC_GFMR_TCI | FCC_GFMR_MODE_ENET);
-
-	/* Set sync/delimiters.
-	*/
-	fccp->fcc_fdsr = 0xd555;
-
-	/* Set protocol specific processing mode for Ethernet.
-	 * This has to be adjusted for Full Duplex operation after we can
-	 * determine how to detect that.
-	 */
-	fccp->fcc_fpsmr = FCC_PSMR_ENCRC;
-
-#ifdef CONFIG_PQ2ADS
-	/* Enable the PHY. */
-	*(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_FETHIEN;
-	*(volatile uint *)(BCSR_ADDR + 4) |=  BCSR1_FETH_RST;
-#endif
-#if defined(CONFIG_PQ2ADS) || defined(CONFIG_PQ2FADS)
-	/* Enable the 2nd PHY. */
-	*(volatile uint *)(BCSR_ADDR + 12) &= ~BCSR3_FETHIEN2;
-	*(volatile uint *)(BCSR_ADDR + 12) |=  BCSR3_FETH2_RST;
-#endif
-
-#if defined(CONFIG_USE_MDIO) || defined(CONFIG_TQM8260)
-	/* start in full duplex mode, and negotiate speed
-	 */
-	fcc_restart (dev, 1);
-#else
-	/* start in half duplex mode
-	 */
-	fcc_restart (dev, 0);
-#endif
-}
-
-#ifdef	CONFIG_USE_MDIO
-/* MII command/status interface.
- * I'm not going to describe all of the details.  You can find the
- * protocol definition in many other places, including the data sheet
- * of most PHY parts.
- * I wonder what "they" were thinking (maybe weren't) when they leave
- * the I2C in the CPM but I have to toggle these bits......
- */
-#ifdef CONFIG_RPX8260
-	/* The EP8260 has the MDIO pins in a BCSR instead of on Port C
-	 * like most other boards.
-	 */
-#define MDIO_ADDR ((volatile u_char *)(RPX_CSR_ADDR + 4))
-#define MAKE_MDIO_OUTPUT *MDIO_ADDR &= ~BCSR4_MII_READ
-#define MAKE_MDIO_INPUT  *MDIO_ADDR |=  BCSR4_MII_READ | BCSR4_MII_MDIO
-#define OUT_MDIO(bit)				\
-	if (bit)				\
-		*MDIO_ADDR |=  BCSR4_MII_MDIO;	\
-	else					\
-		*MDIO_ADDR &= ~BCSR4_MII_MDIO;
-#define IN_MDIO (*MDIO_ADDR & BCSR4_MII_MDIO)
-#define OUT_MDC(bit)				\
-	if (bit)				\
-		*MDIO_ADDR |=  BCSR4_MII_MDC;	\
-	else					\
-		*MDIO_ADDR &= ~BCSR4_MII_MDC;
-#else	/* ifdef CONFIG_RPX8260 */
-	/* This is for the usual case where the MDIO pins are on Port C.
-	 */
-#define MDIO_ADDR (((volatile cpm2_map_t *)CPM_MAP_ADDR)->im_ioport)
-#define MAKE_MDIO_OUTPUT MDIO_ADDR.iop_pdirc |= fip->fc_mdio
-#define MAKE_MDIO_INPUT MDIO_ADDR.iop_pdirc &= ~fip->fc_mdio
-#define OUT_MDIO(bit)				\
-	if (bit)				\
-		MDIO_ADDR.iop_pdatc |= fip->fc_mdio;	\
-	else					\
-		MDIO_ADDR.iop_pdatc &= ~fip->fc_mdio;
-#define IN_MDIO ((MDIO_ADDR.iop_pdatc) & fip->fc_mdio)
-#define OUT_MDC(bit)				\
-	if (bit)				\
-		MDIO_ADDR.iop_pdatc |= fip->fc_mdck;	\
-	else					\
-		MDIO_ADDR.iop_pdatc &= ~fip->fc_mdck;
-#endif	/* ifdef CONFIG_RPX8260 */
-
-static uint
-mii_send_receive(fcc_info_t *fip, uint cmd)
-{
-	uint		retval;
-	int		read_op, i, off;
-	const int	us = 1;
-
-	read_op = ((cmd & 0xf0000000) == 0x60000000);
-
-	/* Write preamble
-	 */
-	OUT_MDIO(1);
-	MAKE_MDIO_OUTPUT;
-	OUT_MDIO(1);
-	for (i = 0; i < 32; i++)
-	{
-		udelay(us);
-		OUT_MDC(1);
-		udelay(us);
-		OUT_MDC(0);
-	}
-
-	/* Write data
-	 */
-	for (i = 0, off = 31; i < (read_op ? 14 : 32); i++, --off)
-	{
-		OUT_MDIO((cmd >> off) & 0x00000001);
-		udelay(us);
-		OUT_MDC(1);
-		udelay(us);
-		OUT_MDC(0);
-	}
-
-	retval = cmd;
-
-	if (read_op)
-	{
-		retval >>= 16;
-
-		MAKE_MDIO_INPUT;
-		udelay(us);
-		OUT_MDC(1);
-		udelay(us);
-		OUT_MDC(0);
-
-		for (i = 0; i < 16; i++)
-		{
-			udelay(us);
-			OUT_MDC(1);
-			udelay(us);
-			retval <<= 1;
-			if (IN_MDIO)
-				retval++;
-			OUT_MDC(0);
-		}
-	}
-
-	MAKE_MDIO_INPUT;
-	udelay(us);
-	OUT_MDC(1);
-	udelay(us);
-	OUT_MDC(0);
-
-	return retval;
-}
-#endif	/* CONFIG_USE_MDIO */
-
-static void
-fcc_stop(struct net_device *dev)
-{
-	struct fcc_enet_private	*fep= (struct fcc_enet_private *)(dev->priv);
-	volatile fcc_t	*fccp = fep->fccp;
-	fcc_info_t *fip = fep->fip;
-	volatile fcc_enet_t *ep = fep->ep;
-	volatile cpm_cpm2_t *cp = cpmp;
-	volatile cbd_t *bdp;
-	int i;
-
-	if ((fccp->fcc_gfmr & (FCC_GFMR_ENR | FCC_GFMR_ENT)) == 0)
-		return;	/* already down */
-
-	fccp->fcc_fccm = 0;
-
-	/* issue the graceful stop tx command */
-	while (cp->cp_cpcr & CPM_CR_FLG);
-	cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock,
-				0x0c, CPM_CR_GRA_STOP_TX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Disable transmit/receive */
-	fccp->fcc_gfmr &= ~(FCC_GFMR_ENR | FCC_GFMR_ENT);
-
-	/* issue the restart tx command */
-	fccp->fcc_fcce = FCC_ENET_GRA;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-	cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock,
-				0x0c, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* free tx buffers */
-	fep->skb_cur = fep->skb_dirty = 0;
-	for (i=0; i<=TX_RING_MOD_MASK; i++) {
-		if (fep->tx_skbuff[i] != NULL) {
-			dev_kfree_skb(fep->tx_skbuff[i]);
-			fep->tx_skbuff[i] = NULL;
-		}
-	}
-	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-	fep->tx_free = TX_RING_SIZE;
-	ep->fen_genfcc.fcc_tbptr = ep->fen_genfcc.fcc_tbase;
-
-	/* Initialize the tx buffer descriptors. */
-	bdp = fep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-		bdp->cbd_sc = 0;
-		bdp->cbd_datlen = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-	/* Set the last buffer to wrap. */
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-}
-
-static void
-fcc_restart(struct net_device *dev, int duplex)
-{
-	struct fcc_enet_private	*fep = (struct fcc_enet_private *)(dev->priv);
-	volatile fcc_t	*fccp = fep->fccp;
-
-	/* stop any transmissions in progress */
-	fcc_stop(dev);
-
-	if (duplex)
-		fccp->fcc_fpsmr |= FCC_PSMR_FDE | FCC_PSMR_LPB;
-	else
-		fccp->fcc_fpsmr &= ~(FCC_PSMR_FDE | FCC_PSMR_LPB);
-
-	/* Enable interrupts for transmit error, complete frame
-	 * received, and any transmit buffer we have also set the
-	 * interrupt flag.
-	 */
-	fccp->fcc_fccm = (FCC_ENET_TXE | FCC_ENET_RXF | FCC_ENET_TXB);
-
-	/* Enable transmit/receive */
-	fccp->fcc_gfmr |= FCC_GFMR_ENR | FCC_GFMR_ENT;
-}
-
-static int
-fcc_enet_open(struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-
-#ifdef	CONFIG_USE_MDIO
-	fep->sequence_done = 0;
-	fep->link = 0;
-
-	if (fep->phy) {
-		fcc_restart(dev, 0);	/* always start in half-duplex */
-		mii_do_cmd(dev, fep->phy->ack_int);
-		mii_do_cmd(dev, fep->phy->config);
-		mii_do_cmd(dev, phy_cmd_config);  /* display configuration */
-		while(!fep->sequence_done)
-			schedule();
-
-		mii_do_cmd(dev, fep->phy->startup);
-		netif_start_queue(dev);
-		return 0;		/* Success */
-	}
-	return -ENODEV;		/* No PHY we understand */
-#else
-	fep->link = 1;
-	fcc_restart(dev, 0);	/* always start in half-duplex */
-	netif_start_queue(dev);
-	return 0;					/* Always succeed */
-#endif	/* CONFIG_USE_MDIO */
-}
-
diff --git a/arch/ppc/8xx_io/Kconfig b/arch/ppc/8xx_io/Kconfig
deleted file mode 100644
index c623e44f01ad..000000000000
--- a/arch/ppc/8xx_io/Kconfig
+++ /dev/null
@@ -1,134 +0,0 @@
-#
-# MPC8xx Communication options
-#
-
-menu "MPC8xx CPM Options"
-	depends on 8xx
-
-config SCC_ENET
-	bool "CPM SCC Ethernet"
-	depends on NET_ETHERNET
-	help
-	  Enable Ethernet support via the Motorola MPC8xx serial
-	  communications controller.
-
-choice
-	prompt "SCC used for Ethernet"
-	depends on SCC_ENET
-	default SCC1_ENET
-
-config SCC1_ENET
-	bool "SCC1"
-	help
-	  Use MPC8xx serial communications controller 1 to drive Ethernet
-	  (default).
-
-config SCC2_ENET
-	bool "SCC2"
-	help
-	  Use MPC8xx serial communications controller 2 to drive Ethernet.
-
-config SCC3_ENET
-	bool "SCC3"
-	help
-	  Use MPC8xx serial communications controller 3 to drive Ethernet.
-
-endchoice
-
-config FEC_ENET
-	bool "860T FEC Ethernet"
-	depends on NET_ETHERNET
-	help
-	  Enable Ethernet support via the Fast Ethernet Controller (FCC) on
-	  the Motorola MPC8260.
-
-config USE_MDIO
-	bool "Use MDIO for PHY configuration"
-	depends on FEC_ENET
-	help
-	  On some boards the hardware configuration of the ethernet PHY can be
-	  used without any software interaction over the MDIO interface, so
-	  all MII code can be omitted. Say N here if unsure or if you don't
-	  need link status reports.
-
-config  FEC_AM79C874
-	bool "Support AMD79C874 PHY"
-	depends on USE_MDIO
-
-config FEC_LXT970
-	bool "Support LXT970 PHY"
-	depends on USE_MDIO
-
-config FEC_LXT971
-	bool "Support LXT971 PHY"
-	depends on USE_MDIO
-	
-config FEC_QS6612
-	bool "Support QS6612 PHY"
-	depends on USE_MDIO
-	
-config ENET_BIG_BUFFERS
-	bool "Use Big CPM Ethernet Buffers"
-	depends on SCC_ENET || FEC_ENET
-	help
-	  Allocate large buffers for MPC8xx Ethernet. Increases throughput
-	  and decreases the likelihood of dropped packets, but costs memory.
-
-# This doesn't really belong here, but it is convenient to ask
-# 8xx specific questions.
-comment "Generic MPC8xx Options"
-
-config 8xx_COPYBACK
-	bool "Copy-Back Data Cache (else Writethrough)"
-	help
-	  Saying Y here will cause the cache on an MPC8xx processor to be used
-	  in Copy-Back mode.  If you say N here, it is used in Writethrough
-	  mode.
-
-	  If in doubt, say Y here.
-
-config 8xx_CPU6
-	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
-	help
-	  MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
-	  require workarounds for Linux (and most other OSes to work).  If you
-	  get a BUG() very early in boot, this might fix the problem.  For
-	  more details read the document entitled "MPC860 Family Device Errata
-	  Reference" on Motorola's website.  This option also incurs a
-	  performance hit.
-
-	  If in doubt, say N here.
-
-choice
-	prompt "Microcode patch selection"
-	default NO_UCODE_PATCH
-	help
-	  Help not implemented yet, coming soon.
-
-config NO_UCODE_PATCH
-	bool "None"
-
-config USB_SOF_UCODE_PATCH
-	bool "USB SOF patch"
-	help
-	  Help not implemented yet, coming soon.
-
-config I2C_SPI_UCODE_PATCH
-	bool "I2C/SPI relocation patch"
-	help
-	  Help not implemented yet, coming soon.
-
-config I2C_SPI_SMC1_UCODE_PATCH
-	bool "I2C/SPI/SMC1 relocation patch"
-	help
-	  Help not implemented yet, coming soon.
-
-endchoice
-
-config UCODE_PATCH
-	bool
-	default y
-	depends on !NO_UCODE_PATCH
-
-endmenu
-
diff --git a/arch/ppc/8xx_io/Makefile b/arch/ppc/8xx_io/Makefile
deleted file mode 100644
index 1051a06df7e0..000000000000
--- a/arch/ppc/8xx_io/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux MPC8xx ppc-specific parts of comm processor
-#
-
-obj-y			:= commproc.o
-
-obj-$(CONFIG_FEC_ENET)	+= fec.o
-obj-$(CONFIG_SCC_ENET)	+= enet.o
-obj-$(CONFIG_UCODE_PATCH) += micropatch.o
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
deleted file mode 100644
index 752443df5ecf..000000000000
--- a/arch/ppc/8xx_io/commproc.c
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * Communication Processor Module.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- * The amount of space available is platform dependent.  On the
- * MBX, the EPPC software loads additional microcode into the
- * communication processor, and uses some of the DP ram for this
- * purpose.  Current, the first 512 bytes and the last 256 bytes of
- * memory are used.  Right now I am conservative and only use the
- * memory that can never be used for microcode.  If there are
- * applications that require more DP ram, we can expand the boundaries
- * but then we have to be careful of any downloaded microcode.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <asm/mpc8xx.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-#include <asm/io.h>
-#include <asm/tlbflush.h>
-#include <asm/rheap.h>
-
-#define immr_map(member)						\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset,			\
-			      FIELD_SIZEOF(immap_t, member));		\
-	addr;								\
-})
-
-#define immr_map_size(member, size)					\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset, size);		\
-	addr;								\
-})
-
-static void m8xx_cpm_dpinit(void);
-cpm8xx_t	*cpmp;		/* Pointer to comm processor space */
-
-/* CPM interrupt vector functions.
-*/
-struct	cpm_action {
-	void	(*handler)(void *);
-	void	*dev_id;
-};
-static	struct	cpm_action cpm_vecs[CPMVEC_NR];
-static	irqreturn_t cpm_interrupt(int irq, void * dev);
-static	irqreturn_t cpm_error_interrupt(int irq, void *dev);
-/* Define a table of names to identify CPM interrupt handlers in
- * /proc/interrupts.
- */
-const char *cpm_int_name[] =
-	{ "error",	"PC4",		"PC5",		"SMC2",
-	  "SMC1",	"SPI",		"PC6",		"Timer 4",
-	  "",		"PC7",		"PC8",		"PC9",
-	  "Timer 3",	"",		"PC10",		"PC11",
-	  "I2C",	"RISC Timer",	"Timer 2",	"",
-	  "IDMA2",	"IDMA1",	"SDMA error",	"PC12",
-	  "PC13",	"Timer 1",	"PC14",		"SCC4",
-	  "SCC3",	"SCC2",		"SCC1",		"PC15"
-	};
-
-static void
-cpm_mask_irq(unsigned int irq)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	clrbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec));
-}
-
-static void
-cpm_unmask_irq(unsigned int irq)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec));
-}
-
-static void
-cpm_ack(unsigned int irq)
-{
-	/* We do not need to do anything here. */
-}
-
-static void
-cpm_eoi(unsigned int irq)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr, (1 << cpm_vec));
-}
-
-struct hw_interrupt_type cpm_pic = {
-	.typename	= " CPM      ",
-	.enable		= cpm_unmask_irq,
-	.disable	= cpm_mask_irq,
-	.ack		= cpm_ack,
-	.end		= cpm_eoi,
-};
-
-void
-m8xx_cpm_reset(void)
-{
-	volatile immap_t	 *imp;
-	volatile cpm8xx_t	*commproc;
-
-	imp = (immap_t *)IMAP_ADDR;
-	commproc = (cpm8xx_t *)&imp->im_cpm;
-
-#ifdef CONFIG_UCODE_PATCH
-	/* Perform a reset.
-	*/
-	commproc->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
-
-	/* Wait for it.
-	*/
-	while (commproc->cp_cpcr & CPM_CR_FLG);
-
-	cpm_load_patch(imp);
-#endif
-
-	/* Set SDMA Bus Request priority 5.
-	 * On 860T, this also enables FEC priority 6.  I am not sure
-	 * this is what we really want for some applications, but the
-	 * manual recommends it.
-	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
-	 */
-	out_be32(&imp->im_siu_conf.sc_sdcr, 1),
-
-	/* Reclaim the DP memory for our use. */
-	m8xx_cpm_dpinit();
-
-	/* Tell everyone where the comm processor resides.
-	*/
-	cpmp = (cpm8xx_t *)commproc;
-}
-
-/* This is called during init_IRQ.  We used to do it above, but this
- * was too early since init_IRQ was not yet called.
- */
-static struct irqaction cpm_error_irqaction = {
-	.handler = cpm_error_interrupt,
-	.mask = CPU_MASK_NONE,
-};
-static struct irqaction cpm_interrupt_irqaction = {
-	.handler = cpm_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "CPM cascade",
-};
-
-void
-cpm_interrupt_init(void)
-{
-	int i;
-
-	/* Initialize the CPM interrupt controller.
-	*/
-	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr,
-	    (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
-		((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, 0);
-
-        /* install the CPM interrupt controller routines for the CPM
-         * interrupt vectors
-         */
-        for ( i = CPM_IRQ_OFFSET ; i < CPM_IRQ_OFFSET + NR_CPM_INTS ; i++ )
-                irq_desc[i].chip = &cpm_pic;
-
-	/* Set our interrupt handler with the core CPU.	*/
-	if (setup_irq(CPM_INTERRUPT, &cpm_interrupt_irqaction))
-		panic("Could not allocate CPM IRQ!");
-
-	/* Install our own error handler. */
-	cpm_error_irqaction.name = cpm_int_name[CPMVEC_ERROR];
-	if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction))
-		panic("Could not allocate CPM error IRQ!");
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr, CICR_IEN);
-}
-
-/*
- * Get the CPM interrupt vector.
- */
-int
-cpm_get_irq(void)
-{
-	int cpm_vec;
-
-	/* Get the vector by setting the ACK bit and then reading
-	 * the register.
-	 */
-	out_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr, 1);
-	cpm_vec = in_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr);
-	cpm_vec >>= 11;
-
-	return cpm_vec;
-}
-
-/* CPM interrupt controller cascade interrupt.
-*/
-static	irqreturn_t
-cpm_interrupt(int irq, void * dev)
-{
-	/* This interrupt handler never actually gets called.  It is
-	 * installed only to unmask the CPM cascade interrupt in the SIU
-	 * and to make the CPM cascade interrupt visible in /proc/interrupts.
-	 */
-	return IRQ_HANDLED;
-}
-
-/* The CPM can generate the error interrupt when there is a race condition
- * between generating and masking interrupts.  All we have to do is ACK it
- * and return.  This is a no-op function so we don't need any special
- * tests in the interrupt handler.
- */
-static	irqreturn_t
-cpm_error_interrupt(int irq, void *dev)
-{
-	return IRQ_HANDLED;
-}
-
-/* A helper function to translate the handler prototype required by
- * request_irq() to the handler prototype required by cpm_install_handler().
- */
-static irqreturn_t
-cpm_handler_helper(int irq, void *dev_id)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	(*cpm_vecs[cpm_vec].handler)(dev_id);
-
-	return IRQ_HANDLED;
-}
-
-/* Install a CPM interrupt handler.
- * This routine accepts a CPM interrupt vector in the range 0 to 31.
- * This routine is retained for backward compatibility.  Rather than using
- * this routine to install a CPM interrupt handler, you can now use
- * request_irq() with an IRQ in the range CPM_IRQ_OFFSET to
- * CPM_IRQ_OFFSET + NR_CPM_INTS - 1 (16 to 47).
- *
- * Notice that the prototype of the interrupt handler function must be
- * different depending on whether you install the handler with
- * request_irq() or cpm_install_handler().
- */
-void
-cpm_install_handler(int cpm_vec, void (*handler)(void *), void *dev_id)
-{
-	int err;
-
-	/* If null handler, assume we are trying to free the IRQ.
-	*/
-	if (!handler) {
-		free_irq(CPM_IRQ_OFFSET + cpm_vec, dev_id);
-		return;
-	}
-
-	if (cpm_vecs[cpm_vec].handler != 0)
-		printk(KERN_INFO "CPM interrupt %x replacing %x\n",
-			(uint)handler, (uint)cpm_vecs[cpm_vec].handler);
-	cpm_vecs[cpm_vec].handler = handler;
-	cpm_vecs[cpm_vec].dev_id = dev_id;
-
-	if ((err = request_irq(CPM_IRQ_OFFSET + cpm_vec, cpm_handler_helper,
-					0, cpm_int_name[cpm_vec], dev_id)))
-		printk(KERN_ERR "request_irq() returned %d for CPM vector %d\n",
-				err, cpm_vec);
-}
-
-/* Free a CPM interrupt handler.
- * This routine accepts a CPM interrupt vector in the range 0 to 31.
- * This routine is retained for backward compatibility.
- */
-void
-cpm_free_handler(int cpm_vec)
-{
-	request_irq(CPM_IRQ_OFFSET + cpm_vec, NULL, 0, 0,
-		cpm_vecs[cpm_vec].dev_id);
-
-	cpm_vecs[cpm_vec].handler = NULL;
-	cpm_vecs[cpm_vec].dev_id = NULL;
-}
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * four BRGs, any of which can be wired to any channel.
- * The internal baud rate clock is the system clock divided by 16.
- * This assumes the baudrate is 16x oversampled by the uart.
- */
-#define BRG_INT_CLK		(((bd_t *)__res)->bi_intfreq)
-#define BRG_UART_CLK		(BRG_INT_CLK/16)
-#define BRG_UART_CLK_DIV16	(BRG_UART_CLK/16)
-
-void
-cpm_setbrg(uint brg, uint rate)
-{
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	*/
-	bp = (uint *)&cpmp->cp_brgc1;
-	bp += brg;
-	/* The BRG has a 12-bit counter.  For really slow baud rates (or
-	 * really fast processors), we may have to further divide by 16.
-	 */
-	if (((BRG_UART_CLK / rate) - 1) < 4096)
-		*bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN;
-	else
-		*bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
-						CPM_BRG_EN | CPM_BRG_DIV16;
-}
-
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/*
- * 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up...
- */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-#define CPM_DPMEM_ALIGNMENT	8
-static u8* dpram_vbase;
-static uint dpram_pbase;
-
-void m8xx_cpm_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	dpram_vbase = immr_map_size(im_cpm.cp_dpmem, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
-	dpram_pbase = (uint)&((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem;
-
-	/* Initialize the info header */
-	rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	/*
-	 * Attach the usable dpmem area.
-	 * XXX: This is actually crap.  CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE are a subset of the available dparm.  It varies
-	 * with the processor and the microcode patches applied / activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/*
- * Allocate the requested size worth of DP memory.
- * This function returns an offset into the DPRAM area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)(dpram_vbase + offset);
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
-
-uint cpm_dpram_phys(u8* addr)
-{
-	return (dpram_pbase + (uint)(addr - dpram_vbase));
-}
-EXPORT_SYMBOL(cpm_dpram_phys);
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c
deleted file mode 100644
index 5899aea1644b..000000000000
--- a/arch/ppc/8xx_io/enet.c
+++ /dev/null
@@ -1,982 +0,0 @@
-/*
- * Ethernet driver for Motorola MPC8xx.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * I copied the basic skeleton from the lance driver, because I did not
- * know how to write the Linux driver, but I did know how the LANCE worked.
- *
- * This version of the driver is somewhat selectable for the different
- * processor/board combinations.  It works for the boards I know about
- * now, and should be easily modified to include others.  Some of the
- * configuration information is contained in <asm/cpm1.h> and the
- * remainder is here.
- *
- * Buffer descriptors are kept in the CPM dual port RAM, and the frame
- * buffers are in the host memory.
- *
- * Right now, I am very watseful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
-#include <linux/bitops.h>
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-#include <asm/cacheflush.h>
-
-/*
- *				Theory of Operation
- *
- * The MPC8xx CPM performs the Ethernet processing on SCC1.  It can use
- * an aribtrary number of buffers on byte boundaries, but must have at
- * least two receive buffers to prevent constant overrun conditions.
- *
- * The buffer descriptors are allocated from the CPM dual port memory
- * with the data buffers allocated from host memory, just like all other
- * serial communication protocols.  The host memory buffers are allocated
- * from the free page pool, and then divided into smaller receive and
- * transmit buffers.  The size of the buffers should be a power of two,
- * since that nicely divides the page.  This creates a ring buffer
- * structure similar to the LANCE and other controllers.
- *
- * Like the LANCE driver:
- * The driver runs as two independent, single-threaded flows of control.  One
- * is the send-packet routine, which enforces single-threaded use by the
- * cep->tx_busy flag.  The other thread is the interrupt handler, which is
- * single threaded by the hardware and other software.
- *
- * The send packet thread has partial control over the Tx ring and the
- * 'cep->tx_busy' flag.  It sets the tx_busy flag whenever it's queuing a Tx
- * packet. If the next queue slot is empty, it clears the tx_busy flag when
- * finished otherwise it sets the 'lp->tx_full' flag.
- *
- * The MBX has a control register external to the MPC8xx that has some
- * control of the Ethernet interface.  Information is in the manual for
- * your board.
- *
- * The RPX boards have an external control/status register.  Consult the
- * programming documents for details unique to your board.
- *
- * For the TQM8xx(L) modules, there is no control register interface.
- * All functions are directly controlled using I/O pins.  See <asm/cpm1.h>.
- */
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT	(2*HZ)
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#ifdef CONFIG_ENET_BIG_BUFFERS
-#define CPM_ENET_RX_PAGES	32
-#define CPM_ENET_RX_FRSIZE	2048
-#define CPM_ENET_RX_FRPPG	(PAGE_SIZE / CPM_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
-#define TX_RING_SIZE		64	/* Must be power of two */
-#define TX_RING_MOD_MASK	63	/*   for this to work */
-#else
-#define CPM_ENET_RX_PAGES	4
-#define CPM_ENET_RX_FRSIZE	2048
-#define CPM_ENET_RX_FRPPG	(PAGE_SIZE / CPM_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
-#define TX_RING_SIZE		8	/* Must be power of two */
-#define TX_RING_MOD_MASK	7	/*   for this to work */
-#endif
-
-/* The CPM stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-/* The CPM buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct scc_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-	scc_t	*sccp;
-
-	/* Virtual addresses for the receive buffers because we can't
-	 * do a __va() on them anymore.
-	 */
-	unsigned char *rx_vaddr[RX_RING_SIZE];
-	struct	net_device_stats stats;
-	uint	tx_full;
-	spinlock_t lock;
-};
-
-static int scc_enet_open(struct net_device *dev);
-static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int scc_enet_rx(struct net_device *dev);
-static void scc_enet_interrupt(void *dev_id);
-static int scc_enet_close(struct net_device *dev);
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-
-/* Get this from various configuration locations (depends on board).
-*/
-/*static	ushort	my_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };*/
-
-/* Typically, 860(T) boards use SCC1 for Ethernet, and other 8xx boards
- * use SCC2. Some even may use SCC3.
- * This is easily extended if necessary.
- */
-#if defined(CONFIG_SCC3_ENET)
-#define CPM_CR_ENET	CPM_CR_CH_SCC3
-#define PROFF_ENET	PROFF_SCC3
-#define SCC_ENET	2		/* Index, not number! */
-#define CPMVEC_ENET	CPMVEC_SCC3
-#elif defined(CONFIG_SCC2_ENET)
-#define CPM_CR_ENET	CPM_CR_CH_SCC2
-#define PROFF_ENET	PROFF_SCC2
-#define SCC_ENET	1		/* Index, not number! */
-#define CPMVEC_ENET	CPMVEC_SCC2
-#elif defined(CONFIG_SCC1_ENET)
-#define CPM_CR_ENET	CPM_CR_CH_SCC1
-#define PROFF_ENET	PROFF_SCC1
-#define SCC_ENET	0		/* Index, not number! */
-#define CPMVEC_ENET	CPMVEC_SCC1
-#else
-#error CONFIG_SCCx_ENET not defined
-#endif
-
-static int
-scc_enet_open(struct net_device *dev)
-{
-
-	/* I should reset the ring buffers here, but I don't yet know
-	 * a simple way to do that.
-	 */
-
-	netif_start_queue(dev);
-	return 0;					/* Always succeed */
-}
-
-static int
-scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-	volatile cbd_t	*bdp;
-
-	/* Fill in a Tx ring entry */
-	bdp = cep->cur_tx;
-
-#ifndef final_version
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since cep->tx_busy should be set.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags.
-	 */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* If the frame is short, tell CPM to pad it.
-	*/
-	if (skb->len <= ETH_ZLEN)
-		bdp->cbd_sc |= BD_ENET_TX_PAD;
-	else
-		bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
-	/* Set buffer length and buffer pointer.
-	*/
-	bdp->cbd_datlen = skb->len;
-	bdp->cbd_bufaddr = __pa(skb->data);
-
-	/* Save skb pointer.
-	*/
-	cep->tx_skbuff[cep->skb_cur] = skb;
-
-	cep->stats.tx_bytes += skb->len;
-	cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	/* Push the data cache so the CPM does not get stale memory
-	 * data.
-	 */
-	flush_dcache_range((unsigned long)(skb->data),
-					(unsigned long)(skb->data + skb->len));
-
-	spin_lock_irq(&cep->lock);
-
-	/* Send it on its way.  Tell CPM its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-	dev->trans_start = jiffies;
-
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-		bdp = cep->tx_bd_base;
-	else
-		bdp++;
-
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		netif_stop_queue(dev);
-		cep->tx_full = 1;
-	}
-
-	cep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&cep->lock);
-
-	return 0;
-}
-
-static void
-scc_enet_timeout(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	cep->stats.tx_errors++;
-#ifndef final_version
-	{
-		int	i;
-		cbd_t	*bdp;
-		printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n",
-		       cep->cur_tx, cep->tx_full ? " (full)" : "",
-		       cep->cur_rx);
-		bdp = cep->tx_bd_base;
-		for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-		bdp = cep->rx_bd_base;
-		for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-	}
-#endif
-	if (!cep->tx_full)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the CPM handler, not the MPC core interrupt.
- */
-static void
-scc_enet_interrupt(void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	ushort	int_events;
-	int	must_restart;
-
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	int_events = cep->sccp->scc_scce;
-	cep->sccp->scc_scce = int_events;
-	must_restart = 0;
-
-	/* Handle receive event in its own function.
-	*/
-	if (int_events & SCCE_ENET_RXF)
-		scc_enet_rx(dev_id);
-
-	/* Check for a transmit error.  The manual is a little unclear
-	 * about this, so the debug code until I get it figured out.  It
-	 * appears that if TXE is set, then TXB is not set.  However,
-	 * if carrier sense is lost during frame transmission, the TXE
-	 * bit is set, "and continues the buffer transmission normally."
-	 * I don't know if "normally" implies TXB is set when the buffer
-	 * descriptor is closed.....trial and error :-).
-	 */
-
-	/* Transmit OK, or non-fatal error.  Update the buffer descriptors.
-	*/
-	if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) {
-	    spin_lock(&cep->lock);
-	    bdp = cep->dirty_tx;
-	    while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
-		if ((bdp==cep->cur_tx) && (cep->tx_full == 0))
-		    break;
-
-		if (bdp->cbd_sc & BD_ENET_TX_HB)	/* No heartbeat */
-			cep->stats.tx_heartbeat_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_LC)	/* Late collision */
-			cep->stats.tx_window_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_RL)	/* Retrans limit */
-			cep->stats.tx_aborted_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_UN)	/* Underrun */
-			cep->stats.tx_fifo_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_CSL)	/* Carrier lost */
-			cep->stats.tx_carrier_errors++;
-
-
-		/* No heartbeat or Lost carrier are not really bad errors.
-		 * The others require a restart transmit command.
-		 */
-		if (bdp->cbd_sc &
-		    (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
-			must_restart = 1;
-			cep->stats.tx_errors++;
-		}
-
-		cep->stats.tx_packets++;
-
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			cep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit.
-		*/
-		dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
-		cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted.
-		*/
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = cep->tx_bd_base;
-		else
-			bdp++;
-
-		/* I don't know if we can be held off from processing these
-		 * interrupts for more than one frame time.  I really hope
-		 * not.  In such a case, we would now want to check the
-		 * currently available BD (cur_tx) and determine if any
-		 * buffers between the dirty_tx and cur_tx have also been
-		 * sent.  We would want to process anything in between that
-		 * does not have BD_ENET_TX_READY set.
-		 */
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (cep->tx_full) {
-			cep->tx_full = 0;
-			if (netif_queue_stopped(dev))
-				netif_wake_queue(dev);
-		}
-
-		cep->dirty_tx = (cbd_t *)bdp;
-	    }
-
-	    if (must_restart) {
-		volatile cpm8xx_t *cp;
-
-		/* Some transmit errors cause the transmitter to shut
-		 * down.  We now issue a restart transmit.  Since the
-		 * errors close the BD and update the pointers, the restart
-		 * _should_ pick up without having to reset any of our
-		 * pointers either.
-		 */
-		cp = cpmp;
-		cp->cp_cpcr =
-		    mk_cr_cmd(CPM_CR_ENET, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	    }
-	    spin_unlock(&cep->lock);
-	}
-
-	/* Check for receive busy, i.e. packets coming but no place to
-	 * put them.  This "can't happen" because the receive interrupt
-	 * is tossing previous frames.
-	 */
-	if (int_events & SCCE_ENET_BSY) {
-		cep->stats.rx_dropped++;
-		printk("CPM ENET: BSY can't happen.\n");
-	}
-
-	return;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-scc_enet_rx(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff *skb;
-	ushort	pkt_len;
-
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = cep->cur_rx;
-
-for (;;) {
-	if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
-		break;
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame, both
-	 * the first and last indicators should be set.
-	 */
-	if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
-		(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
-			printk("CPM ENET: rcv is not first+last\n");
-#endif
-
-	/* Frame too long or too short.
-	*/
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
-		cep->stats.rx_length_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-		cep->stats.rx_frame_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-		cep->stats.rx_crc_errors++;
-
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (bdp->cbd_sc & BD_ENET_RX_CL) {
-		cep->stats.rx_frame_errors++;
-	}
-	else {
-
-		/* Process the incoming frame.
-		*/
-		cep->stats.rx_packets++;
-		pkt_len = bdp->cbd_datlen;
-		cep->stats.rx_bytes += pkt_len;
-
-		/* This does 16 byte alignment, much more than we need.
-		 * The packet length includes FCS, but we don't want to
-		 * include that when passing upstream as it messes up
-		 * bridging applications.
-		 */
-		skb = dev_alloc_skb(pkt_len-4);
-
-		if (skb == NULL) {
-			printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-			cep->stats.rx_dropped++;
-		}
-		else {
-			skb_put(skb,pkt_len-4);	/* Make room */
-			skb_copy_to_linear_data(skb,
-				cep->rx_vaddr[bdp - cep->rx_bd_base],
-				pkt_len-4);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb);
-		}
-	}
-
-	/* Clear the status flags for this buffer.
-	*/
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty.
-	*/
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry.
-	*/
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = cep->rx_bd_base;
-	else
-		bdp++;
-
-   }
-	cep->cur_rx = (cbd_t *)bdp;
-
-	return 0;
-}
-
-static int
-scc_enet_close(struct net_device *dev)
-{
-	/* Don't know what to do yet.
-	*/
-	netif_stop_queue(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	return &cep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	struct	dev_mc_list *dmi;
-	u_char	*mcptr, *tdptr;
-	volatile scc_enet_t *ep;
-	int	i, j;
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)dev->base_addr;
-
-	if (dev->flags&IFF_PROMISC) {
-	
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->sccp->scc_psmr |= SCC_PSMR_PRO;
-	} else {
-
-		cep->sccp->scc_psmr &= ~SCC_PSMR_PRO;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->sen_gaddr1 = 0xffff;
-			ep->sen_gaddr2 = 0xffff;
-			ep->sen_gaddr3 = 0xffff;
-			ep->sen_gaddr4 = 0xffff;
-		}
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->sen_gaddr1 = 0;
-			ep->sen_gaddr2 = 0;
-			ep->sen_gaddr3 = 0;
-			ep->sen_gaddr4 = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++) {
-		
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->sen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				/* this delay is necessary here -- Cort */
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-	}
-}
-
-/* Initialize the CPM Ethernet on SCC.  If EPPC-Bug loaded us, or performed
- * some other network I/O, a whole bunch of this has already been set up.
- * It is no big deal if we do it again, we just have to disable the
- * transmit and receive to make sure we don't catch the CPM with some
- * inconsistent control information.
- */
-static int __init scc_enet_init(void)
-{
-	struct net_device *dev;
-	struct scc_enet_private *cep;
-	int i, j, k, err;
-	uint dp_offset;
-	unsigned char	*eap, *ba;
-	dma_addr_t	mem_addr;
-	bd_t		*bd;
-	volatile	cbd_t		*bdp;
-	volatile	cpm8xx_t	*cp;
-	volatile	scc_t		*sccp;
-	volatile	scc_enet_t	*ep;
-	volatile	immap_t		*immap;
-
-	cp = cpmp;	/* Get pointer to Communication Processor */
-
-	immap = (immap_t *)(mfspr(SPRN_IMMR) & 0xFFFF0000);	/* and to internal registers */
-
-	bd = (bd_t *)__res;
-
-	dev = alloc_etherdev(sizeof(*cep));
-	if (!dev)
-		return -ENOMEM;
-
-	cep = dev->priv;
-	spin_lock_init(&cep->lock);
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)(&cp->cp_dparam[PROFF_ENET]);
-
-	/* And another to the SCC register area.
-	*/
-	sccp = (volatile scc_t *)(&cp->cp_scc[SCC_ENET]);
-	cep->sccp = (scc_t *)sccp;		/* Keep the pointer handy */
-
-	/* Disable receive and transmit in case EPPC-Bug started it.
-	*/
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/* Cookbook style from the MPC860 manual.....
-	 * Not all of this is necessary if EPPC-Bug has initialized
-	 * the network.
-	 * So far we are lucky, all board configurations use the same
-	 * pins, or at least the same I/O Port for these functions.....
-	 * It can't last though......
-	 */
-
-#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
-	/* Configure port A pins for Txd and Rxd.
-	*/
-	immap->im_ioport.iop_papar |=  (PA_ENET_RXD | PA_ENET_TXD);
-	immap->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
-	immap->im_ioport.iop_paodr &=                ~PA_ENET_TXD;
-#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
-	/* Configure port B pins for Txd and Rxd.
-	*/
-	immap->im_cpm.cp_pbpar |=  (PB_ENET_RXD | PB_ENET_TXD);
-	immap->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
-	immap->im_cpm.cp_pbodr &=		 ~PB_ENET_TXD;
-#else
-#error Exactly ONE pair of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
-#endif
-
-#if defined(PC_ENET_LBK)
-	/* Configure port C pins to disable External Loopback
-	 */
-	immap->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
-	immap->im_ioport.iop_pcdir |=  PC_ENET_LBK;
-	immap->im_ioport.iop_pcso  &= ~PC_ENET_LBK;
-	immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK;	/* Disable Loopback */
-#endif	/* PC_ENET_LBK */
-
-#ifdef PE_ENET_TCLK
-	/* Configure port E for TCLK and RCLK.
-	*/
-	cp->cp_pepar |=  (PE_ENET_TCLK | PE_ENET_RCLK);
-	cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
-	cp->cp_peso  &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
-#else
-	/* Configure port A for TCLK and RCLK.
-	*/
-	immap->im_ioport.iop_papar |=  (PA_ENET_TCLK | PA_ENET_RCLK);
-	immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
-#endif
-
-	/* Configure port C pins to enable CLSN and RENA.
-	*/
-	immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immap->im_ioport.iop_pcso  |=  (PC_ENET_CLSN | PC_ENET_RENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	cp->cp_sicr &= ~SICR_ENET_MASK;
-	cp->cp_sicr |=  SICR_ENET_CLKRT;
-
-	/* Manual says set SDDR, but I can't find anything with that
-	 * name.  I think it is a misprint, and should be SDCR.  This
-	 * has already been set by the communication processor initialization.
-	 */
-
-	/* Allocate space for the buffer descriptors in the DP ram.
-	 * These are relative offsets in the DP ram address space.
-	 * Initialize base addresses for the buffer descriptors.
-	 */
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8);
-	ep->sen_genscc.scc_rbase = dp_offset;
-	cep->rx_bd_base = cpm_dpram_addr(dp_offset);
-
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8);
-	ep->sen_genscc.scc_tbase = dp_offset;
-	cep->tx_bd_base = cpm_dpram_addr(dp_offset);
-
-	cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
-	cep->cur_rx = cep->rx_bd_base;
-
-	/* Issue init Rx BD command for SCC.
-	 * Manual says to perform an Init Rx parameters here.  We have
-	 * to perform both Rx and Tx because the SCC may have been
-	 * already running.
-	 * In addition, we have to do it later because we don't yet have
-	 * all of the BD control/status set properly.
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_RX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-	 */
-
-	/* Initialize function code registers for big-endian.
-	*/
-	ep->sen_genscc.scc_rfcr = SCC_EB;
-	ep->sen_genscc.scc_tfcr = SCC_EB;
-
-	/* Set maximum bytes per receive buffer.
-	 * This appears to be an Ethernet frame size, not the buffer
-	 * fragment size.  It must be a multiple of four.
-	 */
-	ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE;
-
-	/* Set CRC preset and mask.
-	*/
-	ep->sen_cpres = 0xffffffff;
-	ep->sen_cmask = 0xdebb20e3;
-
-	ep->sen_crcec = 0;	/* CRC Error counter */
-	ep->sen_alec = 0;	/* alignment error counter */
-	ep->sen_disfc = 0;	/* discard frame counter */
-
-	ep->sen_pads = 0x8888;	/* Tx short frame pad character */
-	ep->sen_retlim = 15;	/* Retry limit threshold */
-
-	ep->sen_maxflr = PKT_MAXBUF_SIZE;   /* maximum frame length register */
-	ep->sen_minflr = PKT_MINBUF_SIZE;  /* minimum frame length register */
-
-	ep->sen_maxd1 = PKT_MAXBLR_SIZE;	/* maximum DMA1 length */
-	ep->sen_maxd2 = PKT_MAXBLR_SIZE;	/* maximum DMA2 length */
-
-	/* Clear hash tables.
-	*/
-	ep->sen_gaddr1 = 0;
-	ep->sen_gaddr2 = 0;
-	ep->sen_gaddr3 = 0;
-	ep->sen_gaddr4 = 0;
-	ep->sen_iaddr1 = 0;
-	ep->sen_iaddr2 = 0;
-	ep->sen_iaddr3 = 0;
-	ep->sen_iaddr4 = 0;
-
-	/* Set Ethernet station address.
-	 */
-	eap = (unsigned char *)&(ep->sen_paddrh);
-	for (i=5; i>=0; i--)
-		*eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
-
-	ep->sen_pper = 0;	/* 'cause the book says so */
-	ep->sen_taddrl = 0;	/* temp address (LSB) */
-	ep->sen_taddrm = 0;
-	ep->sen_taddrh = 0;	/* temp address (MSB) */
-
-	/* Now allocate the host memory pages and initialize the
-	 * buffer descriptors.
-	 */
-	bdp = cep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	bdp = cep->rx_bd_base;
-	k = 0;
-	for (i=0; i<CPM_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		ba = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE,
-				&mem_addr, GFP_KERNEL);
-		/* BUG: no check for failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<CPM_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
-			bdp->cbd_bufaddr = mem_addr;
-			cep->rx_vaddr[k++] = ba;
-			mem_addr += CPM_ENET_RX_FRSIZE;
-			ba += CPM_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Let's re-initialize the channel now.  We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	cep->skb_cur = cep->skb_dirty = 0;
-
-	sccp->scc_scce = 0xffff;	/* Clear any pending events */
-
-	/* Enable interrupts for transmit error, complete frame
-	 * received, and any transmit buffer we have also set the
-	 * interrupt flag.
-	 */
-	sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
-
-	/* Install our interrupt handler.
-	*/
-	cpm_install_handler(CPMVEC_ENET, scc_enet_interrupt, dev);
-
-	/* Set GSMR_H to enable all normal operating modes.
-	 * Set GSMR_L to enable Ethernet to MC68160.
-	 */
-	sccp->scc_gsmrh = 0;
-	sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
-
-	/* Set sync/delimiters.
-	*/
-	sccp->scc_dsr = 0xd555;
-
-	/* Set processing mode.  Use Ethernet CRC, catch broadcast, and
-	 * start frame search 22 bit times after RENA.
-	 */
-	sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
-
-	/* It is now OK to enable the Ethernet transmitter.
-	 * Unfortunately, there are board implementation differences here.
-	 */
-#if   (!defined (PB_ENET_TENA) &&  defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
-	immap->im_ioport.iop_pcpar |=  PC_ENET_TENA;
-	immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
-	cp->cp_pbpar |= PB_ENET_TENA;
-	cp->cp_pbdir |= PB_ENET_TENA;
-#elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA))
-	cp->cp_pepar |=  PE_ENET_TENA;
-	cp->cp_pedir &= ~PE_ENET_TENA;
-	cp->cp_peso  |=  PE_ENET_TENA;
-#else
-#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA
-#endif
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-	/* And while we are here, set the configuration to enable ethernet.
-	*/
-	*((volatile uint *)RPX_CSR_ADDR) &= ~BCSR0_ETHLPBK;
-	*((volatile uint *)RPX_CSR_ADDR) |=
-			(BCSR0_ETHEN | BCSR0_COLTESTDIS | BCSR0_FULLDPLXDIS);
-#endif
-
-#ifdef CONFIG_BSEIP
-	/* BSE uses port B and C for PHY control.
-	*/
-	cp->cp_pbpar &= ~(PB_BSE_POWERUP | PB_BSE_FDXDIS);
-	cp->cp_pbdir |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
-	cp->cp_pbdat |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
-
-	immap->im_ioport.iop_pcpar &= ~PC_BSE_LOOPBACK;
-	immap->im_ioport.iop_pcdir |= PC_BSE_LOOPBACK;
-	immap->im_ioport.iop_pcso &= ~PC_BSE_LOOPBACK;
-	immap->im_ioport.iop_pcdat &= ~PC_BSE_LOOPBACK;
-#endif
-
-#ifdef CONFIG_FADS
-	cp->cp_pbpar |= PB_ENET_TENA;
-	cp->cp_pbdir |= PB_ENET_TENA;
-
-	/* Enable the EEST PHY.
-	*/
-	*((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
-#endif
-
-	dev->base_addr = (unsigned long)ep;
-#if 0
-	dev->name = "CPM_ENET";
-#endif
-
-	/* The CPM Ethernet specific entries in the device structure. */
-	dev->open = scc_enet_open;
-	dev->hard_start_xmit = scc_enet_start_xmit;
-	dev->tx_timeout = scc_enet_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = scc_enet_close;
-	dev->get_stats = scc_enet_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	/* And last, enable the transmit and receive processing.
-	*/
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	printk("%s: CPM ENET Version 0.2 on SCC%d, ", dev->name, SCC_ENET+1);
-	for (i=0; i<5; i++)
-		printk("%02x:", dev->dev_addr[i]);
-	printk("%02x\n", dev->dev_addr[5]);
-
-	return 0;
-}
-
-module_init(scc_enet_init);
-
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
deleted file mode 100644
index 2c604d4f6e8b..000000000000
--- a/arch/ppc/8xx_io/fec.c
+++ /dev/null
@@ -1,1983 +0,0 @@
-/*
- * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * This version of the driver is specific to the FADS implementation,
- * since the board contains control registers external to the processor
- * for the control of the LevelOne LXT970 transceiver.  The MPC860T manual
- * describes connections using the internal parallel port I/O, which
- * is basically all of Port D.
- *
- * Includes support for the following PHYs: QS6612, LXT970, LXT971/2.
- *
- * Right now, I am very wasteful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- * Much better multiple PHY support by Magnus Damm.
- * Copyright (c) 2000 Ericsson Radio Systems AB.
- *
- * Make use of MII for PHY control configurable.
- * Some fixes.
- * Copyright (c) 2000-2002 Wolfgang Denk, DENX Software Engineering.
- *
- * Support for AMD AM79C874 added.
- * Thomas Lange, thomas@corelatus.com
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#ifdef CONFIG_FEC_PACKETHOOK
-#include <linux/pkthook.h>
-#endif
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-
-#ifdef	CONFIG_USE_MDIO
-/* Forward declarations of some structures to support different PHYs
-*/
-
-typedef struct {
-	uint mii_data;
-	void (*funct)(uint mii_reg, struct net_device *dev);
-} phy_cmd_t;
-
-typedef struct {
-	uint id;
-	char *name;
-
-	const phy_cmd_t *config;
-	const phy_cmd_t *startup;
-	const phy_cmd_t *ack_int;
-	const phy_cmd_t *shutdown;
-} phy_info_t;
-#endif	/* CONFIG_USE_MDIO */
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#ifdef CONFIG_ENET_BIG_BUFFERS
-#define FEC_ENET_RX_PAGES	16
-#define FEC_ENET_RX_FRSIZE	2048
-#define FEC_ENET_RX_FRPPG	(PAGE_SIZE / FEC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
-#define TX_RING_SIZE		16	/* Must be power of two */
-#define TX_RING_MOD_MASK	15	/*   for this to work */
-#else
-#define FEC_ENET_RX_PAGES	4
-#define FEC_ENET_RX_FRSIZE	2048
-#define FEC_ENET_RX_FRPPG	(PAGE_SIZE / FEC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
-#define TX_RING_SIZE		8	/* Must be power of two */
-#define TX_RING_MOD_MASK	7	/*   for this to work */
-#endif
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR	((uint)0x80000000)	/* Heartbeat error */
-#define FEC_ENET_BABR	((uint)0x40000000)	/* Babbling receiver */
-#define FEC_ENET_BABT	((uint)0x20000000)	/* Babbling transmitter */
-#define FEC_ENET_GRA	((uint)0x10000000)	/* Graceful stop complete */
-#define FEC_ENET_TXF	((uint)0x08000000)	/* Full frame transmitted */
-#define FEC_ENET_TXB	((uint)0x04000000)	/* A buffer was transmitted */
-#define FEC_ENET_RXF	((uint)0x02000000)	/* Full frame received */
-#define FEC_ENET_RXB	((uint)0x01000000)	/* A buffer was received */
-#define FEC_ENET_MII	((uint)0x00800000)	/* MII interrupt */
-#define FEC_ENET_EBERR	((uint)0x00400000)	/* SDMA bus error */
-
-/*
-*/
-#define FEC_ECNTRL_PINMUX	0x00000004
-#define FEC_ECNTRL_ETHER_EN	0x00000002
-#define FEC_ECNTRL_RESET	0x00000001
-
-#define FEC_RCNTRL_BC_REJ	0x00000010
-#define FEC_RCNTRL_PROM		0x00000008
-#define FEC_RCNTRL_MII_MODE	0x00000004
-#define FEC_RCNTRL_DRT		0x00000002
-#define FEC_RCNTRL_LOOP		0x00000001
-
-#define FEC_TCNTRL_FDEN		0x00000004
-#define FEC_TCNTRL_HBC		0x00000002
-#define FEC_TCNTRL_GTS		0x00000001
-
-/* Delay to wait for FEC reset command to complete (in us)
-*/
-#define FEC_RESET_DELAY		50
-
-/* The FEC stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-/* The FEC buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct fec_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-
-	/* Virtual addresses for the receive buffers because we can't
-	 * do a __va() on them anymore.
-	 */
-	unsigned char *rx_vaddr[RX_RING_SIZE];
-
-	struct	net_device_stats stats;
-	uint	tx_full;
-	spinlock_t lock;
-
-#ifdef	CONFIG_USE_MDIO
-	uint	phy_id;
-	uint	phy_id_done;
-	uint	phy_status;
-	uint	phy_speed;
-	phy_info_t	*phy;
-	struct work_struct phy_task;
-	struct net_device *dev;
-
-	uint	sequence_done;
-
-	uint	phy_addr;
-#endif	/* CONFIG_USE_MDIO */
-
-	int	link;
-	int	old_link;
-	int	full_duplex;
-
-#ifdef CONFIG_FEC_PACKETHOOK
-	unsigned long	ph_lock;
-	fec_ph_func	*ph_rxhandler;
-	fec_ph_func	*ph_txhandler;
-	__u16		ph_proto;
-	volatile __u32	*ph_regaddr;
-	void 		*ph_priv;
-#endif
-};
-
-static int fec_enet_open(struct net_device *dev);
-static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-#ifdef	CONFIG_USE_MDIO
-static void fec_enet_mii(struct net_device *dev);
-#endif	/* CONFIG_USE_MDIO */
-#ifdef CONFIG_FEC_PACKETHOOK
-static void  fec_enet_tx(struct net_device *dev, __u32 regval);
-static void  fec_enet_rx(struct net_device *dev, __u32 regval);
-#else
-static void  fec_enet_tx(struct net_device *dev);
-static void  fec_enet_rx(struct net_device *dev);
-#endif
-static int fec_enet_close(struct net_device *dev);
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void fec_restart(struct net_device *dev, int duplex);
-static void fec_stop(struct net_device *dev);
-static	ushort	my_enet_addr[3];
-
-#ifdef	CONFIG_USE_MDIO
-/* MII processing.  We keep this as simple as possible.  Requests are
- * placed on the list (if there is room).  When the request is finished
- * by the MII, an optional function may be called.
- */
-typedef struct mii_list {
-	uint	mii_regval;
-	void	(*mii_func)(uint val, struct net_device *dev);
-	struct	mii_list *mii_next;
-} mii_list_t;
-
-#define		NMII	20
-mii_list_t	mii_cmds[NMII];
-mii_list_t	*mii_free;
-mii_list_t	*mii_head;
-mii_list_t	*mii_tail;
-
-static int	mii_queue(struct net_device *dev, int request,
-				void (*func)(uint, struct net_device *));
-
-/* Make MII read/write commands for the FEC.
-*/
-#define mk_mii_read(REG)	(0x60020000 | ((REG & 0x1f) << 18))
-#define mk_mii_write(REG, VAL)	(0x50020000 | ((REG & 0x1f) << 18) | \
-						(VAL & 0xffff))
-#define mk_mii_end	0
-#endif	/* CONFIG_USE_MDIO */
-
-/* Transmitter timeout.
-*/
-#define TX_TIMEOUT (2*HZ)
-
-#ifdef	CONFIG_USE_MDIO
-/* Register definitions for the PHY.
-*/
-
-#define MII_REG_CR          0  /* Control Register                         */
-#define MII_REG_SR          1  /* Status Register                          */
-#define MII_REG_PHYIR1      2  /* PHY Identification Register 1            */
-#define MII_REG_PHYIR2      3  /* PHY Identification Register 2            */
-#define MII_REG_ANAR        4  /* A-N Advertisement Register               */
-#define MII_REG_ANLPAR      5  /* A-N Link Partner Ability Register        */
-#define MII_REG_ANER        6  /* A-N Expansion Register                   */
-#define MII_REG_ANNPTR      7  /* A-N Next Page Transmit Register          */
-#define MII_REG_ANLPRNPR    8  /* A-N Link Partner Received Next Page Reg. */
-
-/* values for phy_status */
-
-#define PHY_CONF_ANE	0x0001  /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP	0x0002  /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK	0x00f0  /* mask for speed */
-#define PHY_CONF_10HDX	0x0010  /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX	0x0020  /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX	0x0040  /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX	0x0080  /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK	0x0100  /* 1 up - 0 down */
-#define PHY_STAT_FAULT	0x0200  /* 1 remote fault */
-#define PHY_STAT_ANC	0x0400  /* 1 auto-negotiation complete	*/
-#define PHY_STAT_SPMASK	0xf000  /* mask for speed */
-#define PHY_STAT_10HDX	0x1000  /* 10 Mbit half duplex selected	*/
-#define PHY_STAT_10FDX	0x2000  /* 10 Mbit full duplex selected	*/
-#define PHY_STAT_100HDX	0x4000  /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX	0x8000  /* 100 Mbit full duplex selected */
-#endif	/* CONFIG_USE_MDIO */
-
-#ifdef CONFIG_FEC_PACKETHOOK
-int
-fec_register_ph(struct net_device *dev, fec_ph_func *rxfun, fec_ph_func *txfun,
-		__u16 proto, volatile __u32 *regaddr, void *priv)
-{
-	struct fec_enet_private *fep;
-	int retval = 0;
-
-	fep = dev->priv;
-
-	if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
-		/* Someone is messing with the packet hook */
-		return -EAGAIN;
-	}
-	if (fep->ph_rxhandler != NULL || fep->ph_txhandler != NULL) {
-		retval = -EBUSY;
-		goto out;
-	}
-	fep->ph_rxhandler = rxfun;
-	fep->ph_txhandler = txfun;
-	fep->ph_proto = proto;
-	fep->ph_regaddr = regaddr;
-	fep->ph_priv = priv;
-
-	out:
-	fep->ph_lock = 0;
-
-	return retval;
-}
-
-
-int
-fec_unregister_ph(struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	int retval = 0;
-
-	fep = dev->priv;
-
-	if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
-		/* Someone is messing with the packet hook */
-		return -EAGAIN;
-	}
-
-	fep->ph_rxhandler = fep->ph_txhandler = NULL;
-	fep->ph_proto = 0;
-	fep->ph_regaddr = NULL;
-	fep->ph_priv = NULL;
-
-	fep->ph_lock = 0;
-
-	return retval;
-}
-
-EXPORT_SYMBOL(fec_register_ph);
-EXPORT_SYMBOL(fec_unregister_ph);
-
-#endif /* CONFIG_FEC_PACKETHOOK */
-
-static int
-fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t	*bdp;
-
-	fep = dev->priv;
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	if (!fep->link) {
-		/* Link is down or autonegotiation is in progress. */
-		return 1;
-	}
-
-	/* Fill in a Tx ring entry */
-	bdp = fep->cur_tx;
-
-#ifndef final_version
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since dev->tbusy should be set.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags.
-	 */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* Set buffer length and buffer pointer.
-	*/
-	bdp->cbd_bufaddr = __pa(skb->data);
-	bdp->cbd_datlen = skb->len;
-
-	/* Save skb pointer.
-	*/
-	fep->tx_skbuff[fep->skb_cur] = skb;
-
-	fep->stats.tx_bytes += skb->len;
-	fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	/* Push the data cache so the CPM does not get stale memory
-	 * data.
-	 */
-	flush_dcache_range((unsigned long)skb->data,
-			   (unsigned long)skb->data + skb->len);
-
-	/* disable interrupts while triggering transmit */
-	spin_lock_irq(&fep->lock);
-
-	/* Send it on its way.  Tell FEC its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
-			| BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-	dev->trans_start = jiffies;
-
-	/* Trigger transmission start */
-	fecp->fec_x_des_active = 0x01000000;
-
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP) {
-		bdp = fep->tx_bd_base;
-	} else {
-		bdp++;
-	}
-
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		netif_stop_queue(dev);
-		fep->tx_full = 1;
-	}
-
-	fep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&fep->lock);
-
-	return 0;
-}
-
-static void
-fec_timeout(struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	fep->stats.tx_errors++;
-#ifndef final_version
-	{
-	int	i;
-	cbd_t	*bdp;
-
-	printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n",
-	       (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "",
-	       (unsigned long)fep->dirty_tx,
-	       (unsigned long)fep->cur_rx);
-
-	bdp = fep->tx_bd_base;
-	printk(" tx: %u buffers\n",  TX_RING_SIZE);
-	for (i = 0 ; i < TX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       bdp->cbd_bufaddr);
-		bdp++;
-	}
-
-	bdp = fep->rx_bd_base;
-	printk(" rx: %lu buffers\n",  RX_RING_SIZE);
-	for (i = 0 ; i < RX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       bdp->cbd_bufaddr);
-		bdp++;
-	}
-	}
-#endif
-	if (!fep->tx_full)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the MPC core interrupt.
- */
-static	irqreturn_t
-fec_enet_interrupt(int irq, void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile fec_t	*fecp;
-	uint	int_events;
-#ifdef CONFIG_FEC_PACKETHOOK
-	struct	fec_enet_private *fep = dev->priv;
-	__u32 regval;
-
-	if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	while ((int_events = fecp->fec_ievent) != 0) {
-		fecp->fec_ievent = int_events;
-		if ((int_events & (FEC_ENET_HBERR | FEC_ENET_BABR |
-				   FEC_ENET_BABT | FEC_ENET_EBERR)) != 0) {
-			printk("FEC ERROR %x\n", int_events);
-		}
-
-		/* Handle receive event in its own function.
-		 */
-		if (int_events & FEC_ENET_RXF) {
-#ifdef CONFIG_FEC_PACKETHOOK
-			fec_enet_rx(dev, regval);
-#else
-			fec_enet_rx(dev);
-#endif
-		}
-
-		/* Transmit OK, or non-fatal error. Update the buffer
-		   descriptors. FEC handles all errors, we just discover
-		   them as part of the transmit process.
-		*/
-		if (int_events & FEC_ENET_TXF) {
-#ifdef CONFIG_FEC_PACKETHOOK
-			fec_enet_tx(dev, regval);
-#else
-			fec_enet_tx(dev);
-#endif
-		}
-
-		if (int_events & FEC_ENET_MII) {
-#ifdef	CONFIG_USE_MDIO
-			fec_enet_mii(dev);
-#else
-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
-#endif	/* CONFIG_USE_MDIO */
-		}
-
-	}
-	return IRQ_RETVAL(IRQ_HANDLED);
-}
-
-
-static void
-#ifdef CONFIG_FEC_PACKETHOOK
-fec_enet_tx(struct net_device *dev, __u32 regval)
-#else
-fec_enet_tx(struct net_device *dev)
-#endif
-{
-	struct	fec_enet_private *fep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff	*skb;
-
-	fep = dev->priv;
-	/* lock while transmitting */
-	spin_lock(&fep->lock);
-	bdp = fep->dirty_tx;
-
-	while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) {
-		if (bdp == fep->cur_tx && fep->tx_full == 0) break;
-
-		skb = fep->tx_skbuff[fep->skb_dirty];
-		/* Check for errors. */
-		if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
-				   BD_ENET_TX_RL | BD_ENET_TX_UN |
-				   BD_ENET_TX_CSL)) {
-			fep->stats.tx_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_HB)  /* No heartbeat */
-				fep->stats.tx_heartbeat_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_LC)  /* Late collision */
-				fep->stats.tx_window_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_RL)  /* Retrans limit */
-				fep->stats.tx_aborted_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_UN)  /* Underrun */
-				fep->stats.tx_fifo_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
-				fep->stats.tx_carrier_errors++;
-		} else {
-#ifdef CONFIG_FEC_PACKETHOOK
-			/* Packet hook ... */
-			if (fep->ph_txhandler &&
-			    ((struct ethhdr *)skb->data)->h_proto
-			    == fep->ph_proto) {
-				fep->ph_txhandler((__u8*)skb->data, skb->len,
-						  regval, fep->ph_priv);
-			}
-#endif
-			fep->stats.tx_packets++;
-		}
-
-#ifndef final_version
-		if (bdp->cbd_sc & BD_ENET_TX_READY)
-			printk("HEY! Enet xmit interrupt and TX_READY.\n");
-#endif
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			fep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit.
-		 */
-#if 0
-printk("TXI: %x %x %x\n", bdp, skb, fep->skb_dirty);
-#endif
-		dev_kfree_skb_irq (skb/*, FREE_WRITE*/);
-		fep->tx_skbuff[fep->skb_dirty] = NULL;
-		fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = fep->tx_bd_base;
-		else
-			bdp++;
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (fep->tx_full) {
-			fep->tx_full = 0;
-			if (netif_queue_stopped(dev))
-				netif_wake_queue(dev);
-		}
-#ifdef CONFIG_FEC_PACKETHOOK
-		/* Re-read register. Not exactly guaranteed to be correct,
-		   but... */
-		if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
-	}
-	fep->dirty_tx = (cbd_t *)bdp;
-	spin_unlock(&fep->lock);
-}
-
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static void
-#ifdef CONFIG_FEC_PACKETHOOK
-fec_enet_rx(struct net_device *dev, __u32 regval)
-#else
-fec_enet_rx(struct net_device *dev)
-#endif
-{
-	struct	fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t *bdp;
-	struct	sk_buff	*skb;
-	ushort	pkt_len;
-	__u8 *data;
-
-	fep = dev->priv;
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = fep->cur_rx;
-
-while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) {
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame,
-	 * the last indicator should be set.
-	 */
-	if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0)
-		printk("FEC ENET: rcv is not +last\n");
-#endif
-
-	/* Check for errors. */
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
-			   BD_ENET_RX_CR | BD_ENET_RX_OV)) {
-		fep->stats.rx_errors++;
-		if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
-		/* Frame too long or too short. */
-			fep->stats.rx_length_errors++;
-		}
-		if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-			fep->stats.rx_frame_errors++;
-		if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-			fep->stats.rx_crc_errors++;
-		if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-			fep->stats.rx_crc_errors++;
-	}
-
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (bdp->cbd_sc & BD_ENET_RX_CL) {
-		fep->stats.rx_errors++;
-		fep->stats.rx_frame_errors++;
-		goto rx_processing_done;
-	}
-
-	/* Process the incoming frame.
-	 */
-	fep->stats.rx_packets++;
-	pkt_len = bdp->cbd_datlen;
-	fep->stats.rx_bytes += pkt_len;
-	data = fep->rx_vaddr[bdp - fep->rx_bd_base];
-
-#ifdef CONFIG_FEC_PACKETHOOK
-	/* Packet hook ... */
-	if (fep->ph_rxhandler) {
-		if (((struct ethhdr *)data)->h_proto == fep->ph_proto) {
-			switch (fep->ph_rxhandler(data, pkt_len, regval,
-						  fep->ph_priv)) {
-			case 1:
-				goto rx_processing_done;
-				break;
-			case 0:
-				break;
-			default:
-				fep->stats.rx_errors++;
-				goto rx_processing_done;
-			}
-		}
-	}
-
-	/* If it wasn't filtered - copy it to an sk buffer. */
-#endif
-
-	/* This does 16 byte alignment, exactly what we need.
-	 * The packet length includes FCS, but we don't want to
-	 * include that when passing upstream as it messes up
-	 * bridging applications.
-	 */
-	skb = dev_alloc_skb(pkt_len-4);
-
-	if (skb == NULL) {
-		printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-		fep->stats.rx_dropped++;
-	} else {
-		skb_put(skb,pkt_len-4);	/* Make room */
-		skb_copy_to_linear_data(skb, data, pkt_len-4);
-		skb->protocol=eth_type_trans(skb,dev);
-		netif_rx(skb);
-	}
-  rx_processing_done:
-
-	/* Clear the status flags for this buffer.
-	*/
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty.
-	*/
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry.
-	*/
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = fep->rx_bd_base;
-	else
-		bdp++;
-
-#if 1
-	/* Doing this here will keep the FEC running while we process
-	 * incoming frames.  On a heavily loaded network, we should be
-	 * able to keep up at the expense of system resources.
-	 */
-	fecp->fec_r_des_active = 0x01000000;
-#endif
-#ifdef CONFIG_FEC_PACKETHOOK
-	/* Re-read register. Not exactly guaranteed to be correct,
-	   but... */
-	if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
-   } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */
-	fep->cur_rx = (cbd_t *)bdp;
-
-#if 0
-	/* Doing this here will allow us to process all frames in the
-	 * ring before the FEC is allowed to put more there.  On a heavily
-	 * loaded network, some frames may be lost.  Unfortunately, this
-	 * increases the interrupt overhead since we can potentially work
-	 * our way back to the interrupt return only to come right back
-	 * here.
-	 */
-	fecp->fec_r_des_active = 0x01000000;
-#endif
-}
-
-
-#ifdef	CONFIG_USE_MDIO
-static void
-fec_enet_mii(struct net_device *dev)
-{
-	struct	fec_enet_private *fep;
-	volatile fec_t	*ep;
-	mii_list_t	*mip;
-	uint		mii_reg;
-
-	fep = (struct fec_enet_private *)dev->priv;
-	ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
-	mii_reg = ep->fec_mii_data;
-
-	if ((mip = mii_head) == NULL) {
-		printk("MII and no head!\n");
-		return;
-	}
-
-	if (mip->mii_func != NULL)
-		(*(mip->mii_func))(mii_reg, dev);
-
-	mii_head = mip->mii_next;
-	mip->mii_next = mii_free;
-	mii_free = mip;
-
-	if ((mip = mii_head) != NULL) {
-		ep->fec_mii_data = mip->mii_regval;
-
-	}
-}
-
-static int
-mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
-{
-	struct fec_enet_private *fep;
-	unsigned long	flags;
-	mii_list_t	*mip;
-	int		retval;
-
-	/* Add PHY address to register command.
-	*/
-	fep = dev->priv;
-	regval |= fep->phy_addr << 23;
-
-	retval = 0;
-
-	/* lock while modifying mii_list */
-	spin_lock_irqsave(&fep->lock, flags);
-
-	if ((mip = mii_free) != NULL) {
-		mii_free = mip->mii_next;
-		mip->mii_regval = regval;
-		mip->mii_func = func;
-		mip->mii_next = NULL;
-		if (mii_head) {
-			mii_tail->mii_next = mip;
-			mii_tail = mip;
-		} else {
-			mii_head = mii_tail = mip;
-			(&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec))->fec_mii_data = regval;
-		}
-	} else {
-		retval = 1;
-	}
-
-	spin_unlock_irqrestore(&fep->lock, flags);
-
-	return(retval);
-}
-
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
-{
-	int k;
-
-	if(!c)
-		return;
-
-	for(k = 0; (c+k)->mii_data != mk_mii_end; k++)
-		mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
-}
-
-static void mii_parse_sr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
-
-	if (mii_reg & 0x0004)
-		*s |= PHY_STAT_LINK;
-	if (mii_reg & 0x0010)
-		*s |= PHY_STAT_FAULT;
-	if (mii_reg & 0x0020)
-		*s |= PHY_STAT_ANC;
-
-	fep->link = (*s & PHY_STAT_LINK) ? 1 : 0;
-}
-
-static void mii_parse_cr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP);
-
-	if (mii_reg & 0x1000)
-		*s |= PHY_CONF_ANE;
-	if (mii_reg & 0x4000)
-		*s |= PHY_CONF_LOOP;
-}
-
-static void mii_parse_anar(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_CONF_SPMASK);
-
-	if (mii_reg & 0x0020)
-		*s |= PHY_CONF_10HDX;
-	if (mii_reg & 0x0040)
-		*s |= PHY_CONF_10FDX;
-	if (mii_reg & 0x0080)
-		*s |= PHY_CONF_100HDX;
-	if (mii_reg & 0x00100)
-		*s |= PHY_CONF_100FDX;
-}
-#if 0
-static void mii_disp_reg(uint mii_reg, struct net_device *dev)
-{
-	printk("reg %u = 0x%04x\n", (mii_reg >> 18) & 0x1f, mii_reg & 0xffff);
-}
-#endif
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT970 is used by many boards				     */
-
-#ifdef CONFIG_FEC_LXT970
-
-#define MII_LXT970_MIRROR    16  /* Mirror register           */
-#define MII_LXT970_IER       17  /* Interrupt Enable Register */
-#define MII_LXT970_ISR       18  /* Interrupt Status Register */
-#define MII_LXT970_CONFIG    19  /* Configuration Register    */
-#define MII_LXT970_CSR       20  /* Chip Status Register      */
-
-static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x0800) {
-		if (mii_reg & 0x1000)
-			*s |= PHY_STAT_100FDX;
-		else
-			*s |= PHY_STAT_100HDX;
-	}
-	else {
-		if (mii_reg & 0x1000)
-			*s |= PHY_STAT_10FDX;
-		else
-			*s |= PHY_STAT_10HDX;
-	}
-}
-
-static phy_info_t phy_info_lxt970 = {
-	0x07810000,
-	"LXT970",
-
-	(const phy_cmd_t []) {  /* config */
-#if 0
-//		{ mk_mii_write(MII_REG_ANAR, 0x0021), NULL },
-
-		/* Set default operation of 100-TX....for some reason
-		 * some of these bits are set on power up, which is wrong.
-		 */
-		{ mk_mii_write(MII_LXT970_CONFIG, 0), NULL },
-#endif
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* read SR and ISR to acknowledge */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT970_ISR), NULL },
-
-		/* find out the current status */
-
-		{ mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT971 is used on some of my custom boards                  */
-
-#ifdef CONFIG_FEC_LXT971
-
-/* register definitions for the 971 */
-
-#define MII_LXT971_PCR       16  /* Port Control Register     */
-#define MII_LXT971_SR2       17  /* Status Register 2         */
-#define MII_LXT971_IER       18  /* Interrupt Enable Register */
-#define MII_LXT971_ISR       19  /* Interrupt Status Register */
-#define MII_LXT971_LCR       20  /* LED Control Register      */
-#define MII_LXT971_TCR       30  /* Transmit Control Register */
-
-/*
- * I had some nice ideas of running the MDIO faster...
- * The 971 should support 8MHz and I tried it, but things acted really
- * weird, so 2.5 MHz ought to be enough for anyone...
- */
-
-static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x4000) {
-		if (mii_reg & 0x0200)
-			*s |= PHY_STAT_100FDX;
-		else
-			*s |= PHY_STAT_100HDX;
-	}
-	else {
-		if (mii_reg & 0x0200)
-			*s |= PHY_STAT_10FDX;
-		else
-			*s |= PHY_STAT_10HDX;
-	}
-	if (mii_reg & 0x0008)
-		*s |= PHY_STAT_FAULT;
-}
-
-static phy_info_t phy_info_lxt971 = {
-	0x0001378e,
-	"LXT971",
-
-	(const phy_cmd_t []) {  /* config */
-//		{ mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10  Mbps, HD */
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-
-		/* Somehow does the 971 tell me that the link is down
-		 * the first read after power-up.
-		 * read here to get a valid value in ack_int */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* find out the current status */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
-
-		/* we only need to read ISR to acknowledge */
-
-		{ mk_mii_read(MII_LXT971_ISR), NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-
-/* ------------------------------------------------------------------------- */
-/* The Quality Semiconductor QS6612 is used on the RPX CLLF                  */
-
-#ifdef CONFIG_FEC_QS6612
-
-/* register definitions */
-
-#define MII_QS6612_MCR       17  /* Mode Control Register      */
-#define MII_QS6612_FTR       27  /* Factory Test Register      */
-#define MII_QS6612_MCO       28  /* Misc. Control Register     */
-#define MII_QS6612_ISR       29  /* Interrupt Source Register  */
-#define MII_QS6612_IMR       30  /* Interrupt Mask Register    */
-#define MII_QS6612_PCR       31  /* 100BaseTx PHY Control Reg. */
-
-static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_SPMASK);
-
-	switch((mii_reg >> 2) & 7) {
-	case 1: *s |= PHY_STAT_10HDX; break;
-	case 2: *s |= PHY_STAT_100HDX; break;
-	case 5: *s |= PHY_STAT_10FDX; break;
-	case 6: *s |= PHY_STAT_100FDX; break;
-	}
-}
-
-static phy_info_t phy_info_qs6612 = {
-	0x00181440,
-	"QS6612",
-
-	(const phy_cmd_t []) {  /* config */
-//	{ mk_mii_write(MII_REG_ANAR, 0x061), NULL }, /* 10  Mbps */
-
-		/* The PHY powers up isolated on the RPX,
-		 * so send a command to allow operation.
-		 */
-
-		{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
-
-		/* parse cr and anar to get some info */
-
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-
-		/* we need to read ISR, SR and ANER to acknowledge */
-
-		{ mk_mii_read(MII_QS6612_ISR), NULL },
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_REG_ANER), NULL },
-
-		/* read pcr to get info */
-
-		{ mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_QS6612 */
-
-/* ------------------------------------------------------------------------- */
-/* The Advanced Micro Devices AM79C874 is used on the ICU862		     */
-
-#ifdef CONFIG_FEC_AM79C874
-
-/* register definitions for the 79C874 */
-
-#define MII_AM79C874_MFR	16  /* Miscellaneous Features Register      */
-#define MII_AM79C874_ICSR	17  /* Interrupt Control/Status Register    */
-#define MII_AM79C874_DR		18  /* Diagnostic Register		    */
-#define MII_AM79C874_PMLR	19  /* Power Management & Loopback Register */
-#define MII_AM79C874_MCR	21  /* Mode Control Register		    */
-#define MII_AM79C874_DC		23  /* Disconnect Counter		    */
-#define MII_AM79C874_REC	24  /* Receiver Error Counter		    */
-
-static void mii_parse_amd79c874_dr(uint mii_reg, struct net_device *dev, uint data)
-{
-	volatile struct fec_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	/* Register 18: Bit 10 is data rate, 11 is Duplex */
-	switch ((mii_reg >> 10) & 3) {
-	case 0:	s |= PHY_STAT_10HDX;	break;
-	case 1:	s |= PHY_STAT_100HDX;	break;
-	case 2:	s |= PHY_STAT_10FDX;	break;
-	case 3:	s |= PHY_STAT_100FDX;	break;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_amd79c874 = {
-	0x00022561,
-	"AM79C874",
-
-	(const phy_cmd_t []) {  /* config */
-//		{ mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10  Mbps, HD */
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* find out the current status */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_AM79C874_DR), mii_parse_amd79c874_dr },
-
-		/* we only need to read ICSR to acknowledge */
-
-		{ mk_mii_read(MII_AM79C874_ICSR), NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_AM79C874 */
-
-static phy_info_t *phy_info[] = {
-
-#ifdef CONFIG_FEC_LXT970
-	&phy_info_lxt970,
-#endif /* CONFIG_FEC_LXT970 */
-
-#ifdef CONFIG_FEC_LXT971
-	&phy_info_lxt971,
-#endif /* CONFIG_FEC_LXT971 */
-
-#ifdef CONFIG_FEC_QS6612
-	&phy_info_qs6612,
-#endif /* CONFIG_FEC_QS6612 */
-
-#ifdef CONFIG_FEC_AM79C874
-	&phy_info_amd79c874,
-#endif /* CONFIG_FEC_AM79C874 */
-
-	NULL
-};
-
-static void mii_display_status(struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	if (!fep->link && !fep->old_link) {
-		/* Link is still down - don't print anything */
-		return;
-	}
-
-	printk("%s: status: ", dev->name);
-
-	if (!fep->link) {
-		printk("link down");
-	} else {
-		printk("link up");
-
-		switch(*s & PHY_STAT_SPMASK) {
-		case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break;
-		case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break;
-		case PHY_STAT_10FDX: printk(", 10 Mbps Full Duplex"); break;
-		case PHY_STAT_10HDX: printk(", 10 Mbps Half Duplex"); break;
-		default:
-			printk(", Unknown speed/duplex");
-		}
-
-		if (*s & PHY_STAT_ANC)
-			printk(", auto-negotiation complete");
-	}
-
-	if (*s & PHY_STAT_FAULT)
-		printk(", remote fault");
-
-	printk(".\n");
-}
-
-static void mii_display_config(struct work_struct *work)
-{
-	struct fec_enet_private *fep =
-		container_of(work, struct fec_enet_private, phy_task);
-	struct net_device *dev = fep->dev;
-	volatile uint *s = &(fep->phy_status);
-
-	printk("%s: config: auto-negotiation ", dev->name);
-
-	if (*s & PHY_CONF_ANE)
-		printk("on");
-	else
-		printk("off");
-
-	if (*s & PHY_CONF_100FDX)
-		printk(", 100FDX");
-	if (*s & PHY_CONF_100HDX)
-		printk(", 100HDX");
-	if (*s & PHY_CONF_10FDX)
-		printk(", 10FDX");
-	if (*s & PHY_CONF_10HDX)
-		printk(", 10HDX");
-	if (!(*s & PHY_CONF_SPMASK))
-		printk(", No speed/duplex selected?");
-
-	if (*s & PHY_CONF_LOOP)
-		printk(", loopback enabled");
-
-	printk(".\n");
-
-	fep->sequence_done = 1;
-}
-
-static void mii_relink(struct work_struct *work)
-{
-	struct fec_enet_private *fep =
-		container_of(work, struct fec_enet_private, phy_task);
-	struct net_device *dev = fep->dev;
-	int duplex;
-
-	fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
-	mii_display_status(dev);
-	fep->old_link = fep->link;
-
-	if (fep->link) {
-		duplex = 0;
-		if (fep->phy_status
-		    & (PHY_STAT_100FDX | PHY_STAT_10FDX))
-			duplex = 1;
-		fec_restart(dev, duplex);
-	}
-	else
-		fec_stop(dev);
-
-#if 0
-	enable_irq(fep->mii_irq);
-#endif
-
-}
-
-static void mii_queue_relink(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	fep->dev = dev;
-	INIT_WORK(&fep->phy_task, mii_relink);
-	schedule_work(&fep->phy_task);
-}
-
-static void mii_queue_config(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	fep->dev = dev;
-	INIT_WORK(&fep->phy_task, mii_display_config);
-	schedule_work(&fep->phy_task);
-}
-
-
-
-phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_REG_CR), mii_queue_relink },
-			       { mk_mii_end, } };
-phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_REG_CR), mii_queue_config },
-			       { mk_mii_end, } };
-
-
-
-/* Read remainder of PHY ID.
-*/
-static void
-mii_discover_phy3(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	int	i;
-
-	fep = dev->priv;
-	fep->phy_id |= (mii_reg & 0xffff);
-
-	for(i = 0; phy_info[i]; i++)
-		if(phy_info[i]->id == (fep->phy_id >> 4))
-			break;
-
-	if(!phy_info[i])
-		panic("%s: PHY id 0x%08x is not supported!\n",
-		      dev->name, fep->phy_id);
-
-	fep->phy = phy_info[i];
-	fep->phy_id_done = 1;
-
-	printk("%s: Phy @ 0x%x, type %s (0x%08x)\n",
-		dev->name, fep->phy_addr, fep->phy->name, fep->phy_id);
-}
-
-/* Scan all of the MII PHY addresses looking for someone to respond
- * with a valid ID.  This usually happens quickly.
- */
-static void
-mii_discover_phy(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	uint	phytype;
-
-	fep = dev->priv;
-
-	if ((phytype = (mii_reg & 0xffff)) != 0xffff) {
-
-		/* Got first part of ID, now get remainder.
-		*/
-		fep->phy_id = phytype << 16;
-		mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), mii_discover_phy3);
-	} else {
-		fep->phy_addr++;
-		if (fep->phy_addr < 32) {
-			mii_queue(dev, mk_mii_read(MII_REG_PHYIR1),
-							mii_discover_phy);
-		} else {
-			printk("fec: No PHY device found.\n");
-		}
-	}
-}
-#endif	/* CONFIG_USE_MDIO */
-
-/* This interrupt occurs when the PHY detects a link change.
-*/
-static
-#ifdef CONFIG_RPXCLASSIC
-void mii_link_interrupt(void *dev_id)
-#else
-irqreturn_t mii_link_interrupt(int irq, void * dev_id)
-#endif
-{
-#ifdef	CONFIG_USE_MDIO
-	struct	net_device *dev = dev_id;
-	struct fec_enet_private *fep = dev->priv;
-	volatile immap_t *immap = (immap_t *)IMAP_ADDR;
-	volatile fec_t *fecp = &(immap->im_cpm.cp_fec);
-	unsigned int ecntrl = fecp->fec_ecntrl;
-
-	/* We need the FEC enabled to access the MII
-	*/
-	if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
-		fecp->fec_ecntrl |= FEC_ECNTRL_ETHER_EN;
-	}
-#endif	/* CONFIG_USE_MDIO */
-
-#if 0
-	disable_irq(fep->mii_irq);  /* disable now, enable later */
-#endif
-
-
-#ifdef	CONFIG_USE_MDIO
-	mii_do_cmd(dev, fep->phy->ack_int);
-	mii_do_cmd(dev, phy_cmd_relink);  /* restart and display status */
-
-	if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
-		fecp->fec_ecntrl = ecntrl;	/* restore old settings */
-	}
-#else
-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
-#endif	/* CONFIG_USE_MDIO */
-
-#ifndef CONFIG_RPXCLASSIC
-	return IRQ_RETVAL(IRQ_HANDLED);
-#endif	/* CONFIG_RPXCLASSIC */
-}
-
-static int
-fec_enet_open(struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	/* I should reset the ring buffers here, but I don't yet know
-	 * a simple way to do that.
-	 */
-
-#ifdef	CONFIG_USE_MDIO
-	fep->sequence_done = 0;
-	fep->link = 0;
-
-	if (fep->phy) {
-		mii_do_cmd(dev, fep->phy->ack_int);
-		mii_do_cmd(dev, fep->phy->config);
-		mii_do_cmd(dev, phy_cmd_config);  /* display configuration */
-		while(!fep->sequence_done)
-			schedule();
-
-		mii_do_cmd(dev, fep->phy->startup);
-		netif_start_queue(dev);
-		return 0;		/* Success */
-	}
-	return -ENODEV;		/* No PHY we understand */
-#else
-	fep->link = 1;
-	netif_start_queue(dev);
-	return 0;	/* Success */
-#endif	/* CONFIG_USE_MDIO */
-
-}
-
-static int
-fec_enet_close(struct net_device *dev)
-{
-	/* Don't know what to do yet.
-	*/
-	netif_stop_queue(dev);
-	fec_stop(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev)
-{
-	struct fec_enet_private *fep = (struct fec_enet_private *)dev->priv;
-
-	return &fep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct	fec_enet_private *fep;
-	volatile fec_t *ep;
-
-	fep = (struct fec_enet_private *)dev->priv;
-	ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
-
-	if (dev->flags&IFF_PROMISC) {
-
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		ep->fec_r_cntrl |= FEC_RCNTRL_PROM;
-	} else {
-
-		ep->fec_r_cntrl &= ~FEC_RCNTRL_PROM;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->fec_hash_table_high = 0xffffffff;
-			ep->fec_hash_table_low = 0xffffffff;
-		}
-#if 0
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->sen_gaddr1 = 0;
-			ep->sen_gaddr2 = 0;
-			ep->sen_gaddr3 = 0;
-			ep->sen_gaddr4 = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++) {
-
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->sen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC1, CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				/* this delay is necessary here -- Cort */
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-#endif
-	}
-}
-
-/* Initialize the FEC Ethernet on 860T.
- */
-static int __init fec_enet_init(void)
-{
-	struct net_device *dev;
-	struct fec_enet_private *fep;
-	int i, j, k, err;
-	unsigned char	*eap, *iap, *ba;
-	dma_addr_t	mem_addr;
-	volatile	cbd_t	*bdp;
-	cbd_t		*cbd_base;
-	volatile	immap_t	*immap;
-	volatile	fec_t	*fecp;
-	bd_t		*bd;
-#ifdef CONFIG_SCC_ENET
-	unsigned char	tmpaddr[6];
-#endif
-
-	immap = (immap_t *)IMAP_ADDR;	/* pointer to internal registers */
-
-	bd = (bd_t *)__res;
-
-	dev = alloc_etherdev(sizeof(*fep));
-	if (!dev)
-		return -ENOMEM;
-
-	fep = dev->priv;
-
-	fecp = &(immap->im_cpm.cp_fec);
-
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
-	for (i = 0;
-	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printk ("FEC Reset timeout!\n");
-	}
-
-	/* Set the Ethernet address.  If using multiple Enets on the 8xx,
-	 * this needs some work to get unique addresses.
-	 */
-	eap = (unsigned char *)my_enet_addr;
-	iap = bd->bi_enetaddr;
-
-#ifdef CONFIG_SCC_ENET
-	/*
-         * If a board has Ethernet configured both on a SCC and the
-         * FEC, it needs (at least) 2 MAC addresses (we know that Sun
-         * disagrees, but anyway). For the FEC port, we create
-         * another address by setting one of the address bits above
-         * something that would have (up to now) been allocated.
-	 */
-	for (i=0; i<6; i++)
-		tmpaddr[i] = *iap++;
-	tmpaddr[3] |= 0x80;
-	iap = tmpaddr;
-#endif
-
-	for (i=0; i<6; i++) {
-		dev->dev_addr[i] = *eap++ = *iap++;
-	}
-
-	/* Allocate memory for buffer descriptors.
-	*/
-	if (((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t)) > PAGE_SIZE) {
-		printk("FEC init error.  Need more space.\n");
-		printk("FEC initialization failed.\n");
-		return 1;
-	}
-	cbd_base = (cbd_t *)dma_alloc_coherent(dev->class_dev.dev, PAGE_SIZE,
-					       &mem_addr, GFP_KERNEL);
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fep->rx_bd_base = cbd_base;
-	fep->tx_bd_base = cbd_base + RX_RING_SIZE;
-
-	fep->skb_cur = fep->skb_dirty = 0;
-
-	/* Initialize the receive buffer descriptors.
-	*/
-	bdp = fep->rx_bd_base;
-	k = 0;
-	for (i=0; i<FEC_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		ba = (unsigned char *)dma_alloc_coherent(dev->class_dev.dev,
-							 PAGE_SIZE,
-							 &mem_addr,
-							 GFP_KERNEL);
-		/* BUG: no check for failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY;
-			bdp->cbd_bufaddr = mem_addr;
-			fep->rx_vaddr[k++] = ba;
-			mem_addr += FEC_ENET_RX_FRSIZE;
-			ba += FEC_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-#ifdef CONFIG_FEC_PACKETHOOK
-	fep->ph_lock = 0;
-	fep->ph_rxhandler = fep->ph_txhandler = NULL;
-	fep->ph_proto = 0;
-	fep->ph_regaddr = NULL;
-	fep->ph_priv = NULL;
-#endif
-
-	/* Install our interrupt handler.
-	*/
-	if (request_irq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
-		panic("Could not allocate FEC IRQ!");
-
-#ifdef CONFIG_RPXCLASSIC
-	/* Make Port C, bit 15 an input that causes interrupts.
-	*/
-	immap->im_ioport.iop_pcpar &= ~0x0001;
-	immap->im_ioport.iop_pcdir &= ~0x0001;
-	immap->im_ioport.iop_pcso  &= ~0x0001;
-	immap->im_ioport.iop_pcint |=  0x0001;
-	cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev);
-
-	/* Make LEDS reflect Link status.
-	*/
-	*((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
-#endif
-
-#ifdef PHY_INTERRUPT
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |=
-		(0x80000000 >> PHY_INTERRUPT);
-
-	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) != 0)
-		panic("Could not allocate MII IRQ!");
-#endif
-
-	dev->base_addr = (unsigned long)fecp;
-
-	/* The FEC Ethernet specific entries in the device structure. */
-	dev->open = fec_enet_open;
-	dev->hard_start_xmit = fec_enet_start_xmit;
-	dev->tx_timeout = fec_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = fec_enet_close;
-	dev->get_stats = fec_enet_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-
-#ifdef	CONFIG_USE_MDIO
-	for (i=0; i<NMII-1; i++)
-		mii_cmds[i].mii_next = &mii_cmds[i+1];
-	mii_free = mii_cmds;
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Configure all of port D for MII.
-	*/
-	immap->im_ioport.iop_pdpar = 0x1fff;
-
-	/* Bits moved from Rev. D onward.
-	*/
-	if ((mfspr(SPRN_IMMR) & 0xffff) < 0x0501)
-		immap->im_ioport.iop_pddir = 0x1c58;	/* Pre rev. D */
-	else
-		immap->im_ioport.iop_pddir = 0x1fff;	/* Rev. D and later */
-
-#ifdef	CONFIG_USE_MDIO
-	/* Set MII speed to 2.5 MHz
-	*/
-	fecp->fec_mii_speed = fep->phy_speed =
-		(( (bd->bi_intfreq + 500000) / 2500000 / 2 ) & 0x3F ) << 1;
-#else
-	fecp->fec_mii_speed = 0;	/* turn off MDIO */
-#endif	/* CONFIG_USE_MDIO */
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	printk ("%s: FEC ENET Version 0.2, FEC irq %d"
-#ifdef PHY_INTERRUPT
-		", MII irq %d"
-#endif
-		", addr ",
-		dev->name, FEC_INTERRUPT
-#ifdef PHY_INTERRUPT
-		, PHY_INTERRUPT
-#endif
-	);
-	for (i=0; i<6; i++)
-		printk("%02x%c", dev->dev_addr[i], (i==5) ? '\n' : ':');
-
-#ifdef	CONFIG_USE_MDIO	/* start in full duplex mode, and negotiate speed */
-	fec_restart (dev, 1);
-#else			/* always use half duplex mode only */
-	fec_restart (dev, 0);
-#endif
-
-#ifdef	CONFIG_USE_MDIO
-	/* Queue up command to detect the PHY and initialize the
-	 * remainder of the interface.
-	 */
-	fep->phy_id_done = 0;
-	fep->phy_addr = 0;
-	mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
-#endif	/* CONFIG_USE_MDIO */
-
-	return 0;
-}
-module_init(fec_enet_init);
-
-/* This function is called to start or restart the FEC during a link
- * change.  This only happens when switching between half and full
- * duplex.
- */
-static void
-fec_restart(struct net_device *dev, int duplex)
-{
-	struct fec_enet_private *fep;
-	int i;
-	volatile	cbd_t	*bdp;
-	volatile	immap_t	*immap;
-	volatile	fec_t	*fecp;
-
-	immap = (immap_t *)IMAP_ADDR;	/* pointer to internal registers */
-
-	fecp = &(immap->im_cpm.cp_fec);
-
-	fep = dev->priv;
-
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
-	for (i = 0;
-	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printk ("FEC Reset timeout!\n");
-	}
-
-	/* Set station address.
-	*/
-	fecp->fec_addr_low  = (my_enet_addr[0] << 16) | my_enet_addr[1];
-	fecp->fec_addr_high =  my_enet_addr[2];
-
-	/* Reset all multicast.
-	*/
-	fecp->fec_hash_table_high = 0;
-	fecp->fec_hash_table_low  = 0;
-
-	/* Set maximum receive buffer size.
-	*/
-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-	fecp->fec_r_hash = PKT_MAXBUF_SIZE;
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fecp->fec_r_des_start = iopa((uint)(fep->rx_bd_base));
-	fecp->fec_x_des_start = iopa((uint)(fep->tx_bd_base));
-
-	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-	fep->cur_rx = fep->rx_bd_base;
-
-	/* Reset SKB transmit buffers.
-	*/
-	fep->skb_cur = fep->skb_dirty = 0;
-	for (i=0; i<=TX_RING_MOD_MASK; i++) {
-		if (fep->tx_skbuff[i] != NULL) {
-			dev_kfree_skb(fep->tx_skbuff[i]);
-			fep->tx_skbuff[i] = NULL;
-		}
-	}
-
-	/* Initialize the receive buffer descriptors.
-	*/
-	bdp = fep->rx_bd_base;
-	for (i=0; i<RX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = BD_ENET_RX_EMPTY;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* ...and the same for transmit.
-	*/
-	bdp = fep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Enable MII mode.
-	*/
-	if (duplex) {
-		fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;	/* MII enable */
-		fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;		/* FD enable */
-	}
-	else {
-		fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
-		fecp->fec_x_cntrl = 0;
-	}
-	fep->full_duplex = duplex;
-
-	/* Enable big endian and don't care about SDMA FC.
-	*/
-	fecp->fec_fun_code = 0x78000000;
-
-#ifdef	CONFIG_USE_MDIO
-	/* Set MII speed.
-	*/
-	fecp->fec_mii_speed = fep->phy_speed;
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Clear any outstanding interrupt.
-	*/
-	fecp->fec_ievent = 0xffc0;
-
-	fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
-
-	/* Enable interrupts we wish to service.
-	*/
-	fecp->fec_imask = ( FEC_ENET_TXF | FEC_ENET_TXB |
-			    FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII );
-
-	/* And last, enable the transmit and receive processing.
-	*/
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-	fecp->fec_r_des_active = 0x01000000;
-}
-
-static void
-fec_stop(struct net_device *dev)
-{
-	volatile	immap_t	*immap;
-	volatile	fec_t	*fecp;
-	struct fec_enet_private *fep;
-	int i;
-
-	immap = (immap_t *)IMAP_ADDR;	/* pointer to internal registers */
-
-	fecp = &(immap->im_cpm.cp_fec);
-
-	if ((fecp->fec_ecntrl & FEC_ECNTRL_ETHER_EN) == 0)
-		return;	/* already down */
-
-	fep = dev->priv;
-
-
-	fecp->fec_x_cntrl = 0x01;	/* Graceful transmit stop */
-
-	for (i = 0;
-	     ((fecp->fec_ievent & 0x10000000) == 0) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printk ("FEC timeout on graceful transmit stop\n");
-	}
-
-	/* Clear outstanding MII command interrupts.
-	*/
-	fecp->fec_ievent = FEC_ENET_MII;
-
-	/* Enable MII command finished interrupt
-	*/
-	fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
-	fecp->fec_imask = FEC_ENET_MII;
-
-#ifdef	CONFIG_USE_MDIO
-	/* Set MII speed.
-	*/
-	fecp->fec_mii_speed = fep->phy_speed;
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Disable FEC
-	*/
-	fecp->fec_ecntrl &= ~(FEC_ECNTRL_ETHER_EN);
-}
diff --git a/arch/ppc/8xx_io/micropatch.c b/arch/ppc/8xx_io/micropatch.c
deleted file mode 100644
index 9a5d95da7c28..000000000000
--- a/arch/ppc/8xx_io/micropatch.c
+++ /dev/null
@@ -1,743 +0,0 @@
-
-/* Microcode patches for the CPM as supplied by Motorola.
- * This is the one for IIC/SPI.  There is a newer one that
- * also relocates SMC2, but this would require additional changes
- * to uart.c, so I am holding off on that for a moment.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/mpc8xx.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-
-/*
- * I2C/SPI relocation patch arrays.
- */
-
-#ifdef CONFIG_I2C_SPI_UCODE_PATCH
-
-uint patch_2000[] = {
-	0x7FFFEFD9,
-	0x3FFD0000,
-	0x7FFB49F7,
-	0x7FF90000,
-	0x5FEFADF7,
-	0x5F89ADF7,
-	0x5FEFAFF7,
-	0x5F89AFF7,
-	0x3A9CFBC8,
-	0xE7C0EDF0,
-	0x77C1E1BB,
-	0xF4DC7F1D,
-	0xABAD932F,
-	0x4E08FDCF,
-	0x6E0FAFF8,
-	0x7CCF76CF,
-	0xFD1FF9CF,
-	0xABF88DC6,
-	0xAB5679F7,
-	0xB0937383,
-	0xDFCE79F7,
-	0xB091E6BB,
-	0xE5BBE74F,
-	0xB3FA6F0F,
-	0x6FFB76CE,
-	0xEE0DF9CF,
-	0x2BFBEFEF,
-	0xCFEEF9CF,
-	0x76CEAD24,
-	0x90B2DF9A,
-	0x7FDDD0BF,
-	0x4BF847FD,
-	0x7CCF76CE,
-	0xCFEF7E1F,
-	0x7F1D7DFD,
-	0xF0B6EF71,
-	0x7FC177C1,
-	0xFBC86079,
-	0xE722FBC8,
-	0x5FFFDFFF,
-	0x5FB2FFFB,
-	0xFBC8F3C8,
-	0x94A67F01,
-	0x7F1D5F39,
-	0xAFE85F5E,
-	0xFFDFDF96,
-	0xCB9FAF7D,
-	0x5FC1AFED,
-	0x8C1C5FC1,
-	0xAFDD5FC3,
-	0xDF9A7EFD,
-	0xB0B25FB2,
-	0xFFFEABAD,
-	0x5FB2FFFE,
-	0x5FCE600B,
-	0xE6BB600B,
-	0x5FCEDFC6,
-	0x27FBEFDF,
-	0x5FC8CFDE,
-	0x3A9CE7C0,
-	0xEDF0F3C8,
-	0x7F0154CD,
-	0x7F1D2D3D,
-	0x363A7570,
-	0x7E0AF1CE,
-	0x37EF2E68,
-	0x7FEE10EC,
-	0xADF8EFDE,
-	0xCFEAE52F,
-	0x7D0FE12B,
-	0xF1CE5F65,
-	0x7E0A4DF8,
-	0xCFEA5F72,
-	0x7D0BEFEE,
-	0xCFEA5F74,
-	0xE522EFDE,
-	0x5F74CFDA,
-	0x0B627385,
-	0xDF627E0A,
-	0x30D8145B,
-	0xBFFFF3C8,
-	0x5FFFDFFF,
-	0xA7F85F5E,
-	0xBFFE7F7D,
-	0x10D31450,
-	0x5F36BFFF,
-	0xAF785F5E,
-	0xBFFDA7F8,
-	0x5F36BFFE,
-	0x77FD30C0,
-	0x4E08FDCF,
-	0xE5FF6E0F,
-	0xAFF87E1F,
-	0x7E0FFD1F,
-	0xF1CF5F1B,
-	0xABF80D5E,
-	0x5F5EFFEF,
-	0x79F730A2,
-	0xAFDD5F34,
-	0x47F85F34,
-	0xAFED7FDD,
-	0x50B24978,
-	0x47FD7F1D,
-	0x7DFD70AD,
-	0xEF717EC1,
-	0x6BA47F01,
-	0x2D267EFD,
-	0x30DE5F5E,
-	0xFFFD5F5E,
-	0xFFEF5F5E,
-	0xFFDF0CA0,
-	0xAFED0A9E,
-	0xAFDD0C3A,
-	0x5F3AAFBD,
-	0x7FBDB082,
-	0x5F8247F8
-};
-
-uint patch_2f00[] = {
-	0x3E303430,
-	0x34343737,
-	0xABF7BF9B,
-	0x994B4FBD,
-	0xBD599493,
-	0x349FFF37,
-	0xFB9B177D,
-	0xD9936956,
-	0xBBFDD697,
-	0xBDD2FD11,
-	0x31DB9BB3,
-	0x63139637,
-	0x93733693,
-	0x193137F7,
-	0x331737AF,
-	0x7BB9B999,
-	0xBB197957,
-	0x7FDFD3D5,
-	0x73B773F7,
-	0x37933B99,
-	0x1D115316,
-	0x99315315,
-	0x31694BF4,
-	0xFBDBD359,
-	0x31497353,
-	0x76956D69,
-	0x7B9D9693,
-	0x13131979,
-	0x79376935
-};
-#endif
-
-/*
- * I2C/SPI/SMC1 relocation patch arrays.
- */
-
-#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
-
-uint patch_2000[] = {
-	0x3fff0000,
-	0x3ffd0000,
-	0x3ffb0000,
-	0x3ff90000,
-	0x5f13eff8,
-	0x5eb5eff8,
-	0x5f88adf7,
-	0x5fefadf7,
-	0x3a9cfbc8,
-	0x77cae1bb,
-	0xf4de7fad,
-	0xabae9330,
-	0x4e08fdcf,
-	0x6e0faff8,
-	0x7ccf76cf,
-	0xfdaff9cf,
-	0xabf88dc8,
-	0xab5879f7,
-	0xb0925d8d,
-	0xdfd079f7,
-	0xb090e6bb,
-	0xe5bbe74f,
-	0x9e046f0f,
-	0x6ffb76ce,
-	0xee0cf9cf,
-	0x2bfbefef,
-	0xcfeef9cf,
-	0x76cead23,
-	0x90b3df99,
-	0x7fddd0c1,
-	0x4bf847fd,
-	0x7ccf76ce,
-	0xcfef77ca,
-	0x7eaf7fad,
-	0x7dfdf0b7,
-	0xef7a7fca,
-	0x77cafbc8,
-	0x6079e722,
-	0xfbc85fff,
-	0xdfff5fb3,
-	0xfffbfbc8,
-	0xf3c894a5,
-	0xe7c9edf9,
-	0x7f9a7fad,
-	0x5f36afe8,
-	0x5f5bffdf,
-	0xdf95cb9e,
-	0xaf7d5fc3,
-	0xafed8c1b,
-	0x5fc3afdd,
-	0x5fc5df99,
-	0x7efdb0b3,
-	0x5fb3fffe,
-	0xabae5fb3,
-	0xfffe5fd0,
-	0x600be6bb,
-	0x600b5fd0,
-	0xdfc827fb,
-	0xefdf5fca,
-	0xcfde3a9c,
-	0xe7c9edf9,
-	0xf3c87f9e,
-	0x54ca7fed,
-	0x2d3a3637,
-	0x756f7e9a,
-	0xf1ce37ef,
-	0x2e677fee,
-	0x10ebadf8,
-	0xefdecfea,
-	0xe52f7d9f,
-	0xe12bf1ce,
-	0x5f647e9a,
-	0x4df8cfea,
-	0x5f717d9b,
-	0xefeecfea,
-	0x5f73e522,
-	0xefde5f73,
-	0xcfda0b61,
-	0x5d8fdf61,
-	0xe7c9edf9,
-	0x7e9a30d5,
-	0x1458bfff,
-	0xf3c85fff,
-	0xdfffa7f8,
-	0x5f5bbffe,
-	0x7f7d10d0,
-	0x144d5f33,
-	0xbfffaf78,
-	0x5f5bbffd,
-	0xa7f85f33,
-	0xbffe77fd,
-	0x30bd4e08,
-	0xfdcfe5ff,
-	0x6e0faff8,
-	0x7eef7e9f,
-	0xfdeff1cf,
-	0x5f17abf8,
-	0x0d5b5f5b,
-	0xffef79f7,
-	0x309eafdd,
-	0x5f3147f8,
-	0x5f31afed,
-	0x7fdd50af,
-	0x497847fd,
-	0x7f9e7fed,
-	0x7dfd70a9,
-	0xef7e7ece,
-	0x6ba07f9e,
-	0x2d227efd,
-	0x30db5f5b,
-	0xfffd5f5b,
-	0xffef5f5b,
-	0xffdf0c9c,
-	0xafed0a9a,
-	0xafdd0c37,
-	0x5f37afbd,
-	0x7fbdb081,
-	0x5f8147f8,
-	0x3a11e710,
-	0xedf0ccdd,
-	0xf3186d0a,
-	0x7f0e5f06,
-	0x7fedbb38,
-	0x3afe7468,
-	0x7fedf4fc,
-	0x8ffbb951,
-	0xb85f77fd,
-	0xb0df5ddd,
-	0xdefe7fed,
-	0x90e1e74d,
-	0x6f0dcbf7,
-	0xe7decfed,
-	0xcb74cfed,
-	0xcfeddf6d,
-	0x91714f74,
-	0x5dd2deef,
-	0x9e04e7df,
-	0xefbb6ffb,
-	0xe7ef7f0e,
-	0x9e097fed,
-	0xebdbeffa,
-	0xeb54affb,
-	0x7fea90d7,
-	0x7e0cf0c3,
-	0xbffff318,
-	0x5fffdfff,
-	0xac59efea,
-	0x7fce1ee5,
-	0xe2ff5ee1,
-	0xaffbe2ff,
-	0x5ee3affb,
-	0xf9cc7d0f,
-	0xaef8770f,
-	0x7d0fb0c6,
-	0xeffbbfff,
-	0xcfef5ede,
-	0x7d0fbfff,
-	0x5ede4cf8,
-	0x7fddd0bf,
-	0x49f847fd,
-	0x7efdf0bb,
-	0x7fedfffd,
-	0x7dfdf0b7,
-	0xef7e7e1e,
-	0x5ede7f0e,
-	0x3a11e710,
-	0xedf0ccab,
-	0xfb18ad2e,
-	0x1ea9bbb8,
-	0x74283b7e,
-	0x73c2e4bb,
-	0x2ada4fb8,
-	0xdc21e4bb,
-	0xb2a1ffbf,
-	0x5e2c43f8,
-	0xfc87e1bb,
-	0xe74ffd91,
-	0x6f0f4fe8,
-	0xc7ba32e2,
-	0xf396efeb,
-	0x600b4f78,
-	0xe5bb760b,
-	0x53acaef8,
-	0x4ef88b0e,
-	0xcfef9e09,
-	0xabf8751f,
-	0xefef5bac,
-	0x741f4fe8,
-	0x751e760d,
-	0x7fdbf081,
-	0x741cafce,
-	0xefcc7fce,
-	0x751e70ac,
-	0x741ce7bb,
-	0x3372cfed,
-	0xafdbefeb,
-	0xe5bb760b,
-	0x53f2aef8,
-	0xafe8e7eb,
-	0x4bf8771e,
-	0x7e247fed,
-	0x4fcbe2cc,
-	0x7fbc30a9,
-	0x7b0f7a0f,
-	0x34d577fd,
-	0x308b5db7,
-	0xde553e5f,
-	0xaf78741f,
-	0x741f30f0,
-	0xcfef5e2c,
-	0x741f3eac,
-	0xafb8771e,
-	0x5e677fed,
-	0x0bd3e2cc,
-	0x741ccfec,
-	0xe5ca53cd,
-	0x6fcb4f74,
-	0x5dadde4b,
-	0x2ab63d38,
-	0x4bb3de30,
-	0x751f741c,
-	0x6c42effa,
-	0xefea7fce,
-	0x6ffc30be,
-	0xefec3fca,
-	0x30b3de2e,
-	0xadf85d9e,
-	0xaf7daefd,
-	0x5d9ede2e,
-	0x5d9eafdd,
-	0x761f10ac,
-	0x1da07efd,
-	0x30adfffe,
-	0x4908fb18,
-	0x5fffdfff,
-	0xafbb709b,
-	0x4ef85e67,
-	0xadf814ad,
-	0x7a0f70ad,
-	0xcfef50ad,
-	0x7a0fde30,
-	0x5da0afed,
-	0x3c12780f,
-	0xefef780f,
-	0xefef790f,
-	0xa7f85e0f,
-	0xffef790f,
-	0xefef790f,
-	0x14adde2e,
-	0x5d9eadfd,
-	0x5e2dfffb,
-	0xe79addfd,
-	0xeff96079,
-	0x607ae79a,
-	0xddfceff9,
-	0x60795dff,
-	0x607acfef,
-	0xefefefdf,
-	0xefbfef7f,
-	0xeeffedff,
-	0xebffe7ff,
-	0xafefafdf,
-	0xafbfaf7f,
-	0xaeffadff,
-	0xabffa7ff,
-	0x6fef6fdf,
-	0x6fbf6f7f,
-	0x6eff6dff,
-	0x6bff67ff,
-	0x2fef2fdf,
-	0x2fbf2f7f,
-	0x2eff2dff,
-	0x2bff27ff,
-	0x4e08fd1f,
-	0xe5ff6e0f,
-	0xaff87eef,
-	0x7e0ffdef,
-	0xf11f6079,
-	0xabf8f542,
-	0x7e0af11c,
-	0x37cfae3a,
-	0x7fec90be,
-	0xadf8efdc,
-	0xcfeae52f,
-	0x7d0fe12b,
-	0xf11c6079,
-	0x7e0a4df8,
-	0xcfea5dc4,
-	0x7d0befec,
-	0xcfea5dc6,
-	0xe522efdc,
-	0x5dc6cfda,
-	0x4e08fd1f,
-	0x6e0faff8,
-	0x7c1f761f,
-	0xfdeff91f,
-	0x6079abf8,
-	0x761cee24,
-	0xf91f2bfb,
-	0xefefcfec,
-	0xf91f6079,
-	0x761c27fb,
-	0xefdf5da7,
-	0xcfdc7fdd,
-	0xd09c4bf8,
-	0x47fd7c1f,
-	0x761ccfcf,
-	0x7eef7fed,
-	0x7dfdf093,
-	0xef7e7f1e,
-	0x771efb18,
-	0x6079e722,
-	0xe6bbe5bb,
-	0xae0ae5bb,
-	0x600bae85,
-	0xe2bbe2bb,
-	0xe2bbe2bb,
-	0xaf02e2bb,
-	0xe2bb2ff9,
-	0x6079e2bb
-};
-
-uint patch_2f00[] = {
-	0x30303030,
-	0x3e3e3434,
-	0xabbf9b99,
-	0x4b4fbdbd,
-	0x59949334,
-	0x9fff37fb,
-	0x9b177dd9,
-	0x936956bb,
-	0xfbdd697b,
-	0xdd2fd113,
-	0x1db9f7bb,
-	0x36313963,
-	0x79373369,
-	0x3193137f,
-	0x7331737a,
-	0xf7bb9b99,
-	0x9bb19795,
-	0x77fdfd3d,
-	0x573b773f,
-	0x737933f7,
-	0xb991d115,
-	0x31699315,
-	0x31531694,
-	0xbf4fbdbd,
-	0x35931497,
-	0x35376956,
-	0xbd697b9d,
-	0x96931313,
-	0x19797937,
-	0x6935af78,
-	0xb9b3baa3,
-	0xb8788683,
-	0x368f78f7,
-	0x87778733,
-	0x3ffffb3b,
-	0x8e8f78b8,
-	0x1d118e13,
-	0xf3ff3f8b,
-	0x6bd8e173,
-	0xd1366856,
-	0x68d1687b,
-	0x3daf78b8,
-	0x3a3a3f87,
-	0x8f81378f,
-	0xf876f887,
-	0x77fd8778,
-	0x737de8d6,
-	0xbbf8bfff,
-	0xd8df87f7,
-	0xfd876f7b,
-	0x8bfff8bd,
-	0x8683387d,
-	0xb873d87b,
-	0x3b8fd7f8,
-	0xf7338883,
-	0xbb8ee1f8,
-	0xef837377,
-	0x3337b836,
-	0x817d11f8,
-	0x7378b878,
-	0xd3368b7d,
-	0xed731b7d,
-	0x833731f3,
-	0xf22f3f23
-};
-
-uint patch_2e00[] = {
-	0x27eeeeee,
-	0xeeeeeeee,
-	0xeeeeeeee,
-	0xeeeeeeee,
-	0xee4bf4fb,
-	0xdbd259bb,
-	0x1979577f,
-	0xdfd2d573,
-	0xb773f737,
-	0x4b4fbdbd,
-	0x25b9b177,
-	0xd2d17376,
-	0x956bbfdd,
-	0x697bdd2f,
-	0xff9f79ff,
-	0xff9ff22f
-};
-#endif
-
-/*
- *  USB SOF patch arrays.
- */
-
-#ifdef CONFIG_USB_SOF_UCODE_PATCH
-
-uint patch_2000[] = {
-	0x7fff0000,
-	0x7ffd0000,
-	0x7ffb0000,
-	0x49f7ba5b,
-	0xba383ffb,
-	0xf9b8b46d,
-	0xe5ab4e07,
-	0xaf77bffe,
-	0x3f7bbf79,
-	0xba5bba38,
-	0xe7676076,
-	0x60750000
-};
-
-uint patch_2f00[] = {
-	0x3030304c,
-	0xcab9e441,
-	0xa1aaf220
-};
-#endif
-
-void
-cpm_load_patch(volatile immap_t *immr)
-{
-	volatile uint		*dp;		/* Dual-ported RAM. */
-	volatile cpm8xx_t	*commproc;
-	volatile iic_t		*iip;
-	volatile spi_t		*spp;
-	volatile smc_uart_t	*smp;
-	int	i;
-
-	commproc = (cpm8xx_t *)&immr->im_cpm;
-
-#ifdef CONFIG_USB_SOF_UCODE_PATCH
-	commproc->cp_rccr = 0;
-
-	dp = (uint *)(commproc->cp_dpmem);
-	for (i=0; i<(sizeof(patch_2000)/4); i++)
-		*dp++ = patch_2000[i];
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
-	for (i=0; i<(sizeof(patch_2f00)/4); i++)
-		*dp++ = patch_2f00[i];
-
-	commproc->cp_rccr = 0x0009;
-
-	printk("USB SOF microcode patch installed\n");
-#endif /* CONFIG_USB_SOF_UCODE_PATCH */
-
-#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
-    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
-
-	commproc->cp_rccr = 0;
-
-	dp = (uint *)(commproc->cp_dpmem);
-	for (i=0; i<(sizeof(patch_2000)/4); i++)
-		*dp++ = patch_2000[i];
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
-	for (i=0; i<(sizeof(patch_2f00)/4); i++)
-		*dp++ = patch_2f00[i];
-
-	iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
-# define RPBASE 0x0500
-	iip->iic_rpbase = RPBASE;
-
-	/* Put SPI above the IIC, also 32-byte aligned.
-	*/
-	i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-	spp->spi_rpbase = i;
-
-# if defined(CONFIG_I2C_SPI_UCODE_PATCH)
-	commproc->cp_cpmcr1 = 0x802a;
-	commproc->cp_cpmcr2 = 0x8028;
-	commproc->cp_cpmcr3 = 0x802e;
-	commproc->cp_cpmcr4 = 0x802c;
-	commproc->cp_rccr = 1;
-
-	printk("I2C/SPI microcode patch installed.\n");
-# endif /* CONFIG_I2C_SPI_UCODE_PATCH */
-
-# if defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0e00]);
-	for (i=0; i<(sizeof(patch_2e00)/4); i++)
-		*dp++ = patch_2e00[i];
-
-	commproc->cp_cpmcr1 = 0x8080;
-	commproc->cp_cpmcr2 = 0x808a;
-	commproc->cp_cpmcr3 = 0x8028;
-	commproc->cp_cpmcr4 = 0x802a;
-	commproc->cp_rccr = 3;
-
-	smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1];
-	smp->smc_rpbase = 0x1FC0;
-
-	printk("I2C/SPI/SMC1 microcode patch installed.\n");
-# endif /* CONFIG_I2C_SPI_SMC1_UCODE_PATCH) */
-
-#endif /* some variation of the I2C/SPI patch was selected */
-}
-
-/*
- *  Take this entire routine out, since no one calls it and its 
- * logic is suspect.
- */
-
-#if 0
-void
-verify_patch(volatile immap_t *immr)
-{
-	volatile uint		*dp;
-	volatile cpm8xx_t	*commproc;
-	int i;
-
-	commproc = (cpm8xx_t *)&immr->im_cpm;
-
-	printk("cp_rccr %x\n", commproc->cp_rccr);
-	commproc->cp_rccr = 0;
-
-	dp = (uint *)(commproc->cp_dpmem);
-	for (i=0; i<(sizeof(patch_2000)/4); i++)
-		if (*dp++ != patch_2000[i]) {
-			printk("patch_2000 bad at %d\n", i);
-			dp--;
-			printk("found 0x%X, wanted 0x%X\n", *dp, patch_2000[i]);
-			break;
-		}
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
-	for (i=0; i<(sizeof(patch_2f00)/4); i++)
-		if (*dp++ != patch_2f00[i]) {
-			printk("patch_2f00 bad at %d\n", i);
-			dp--;
-			printk("found 0x%X, wanted 0x%X\n", *dp, patch_2f00[i]);
-			break;
-		}
-
-	commproc->cp_rccr = 0x0009;
-}
-#endif
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
deleted file mode 100644
index 0f1863ed9c1c..000000000000
--- a/arch/ppc/Kconfig
+++ /dev/null
@@ -1,1186 +0,0 @@
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux/PowerPC Kernel Configuration"
-
-config WORD_SIZE
-	int
-	default 32
-
-config MMU
-	bool
-	default y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config PPC
-	bool
-	default y
-	select HAVE_IDE
-	select HAVE_OPROFILE
-	select HAVE_KPROBES
-
-config PPC32
-	bool
-	default y
-
-# All PPCs use generic nvram driver through ppc_md
-config GENERIC_NVRAM
-	bool
-	default y
-
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-
-config SCHED_NO_NO_OMIT_FRAME_POINTER
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
-
-config GENERIC_BUG
-	bool
-	default y
-	depends on BUG
-
-source "init/Kconfig"
-
-menu "Processor"
-
-choice
-	prompt "Processor Type"
-	default 6xx
-
-config 6xx
-	bool "6xx/7xx/74xx/52xx/82xx"
-	select PPC_FPU
-	help
-	  There are four types of PowerPC chips supported.  The more common
-	  types (601, 603, 604, 740, 750, 7400), the older Freescale
-	  (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
-	  52xx, 82xx), the IBM embedded versions (403 and 405) and
-	  the Book E embedded processors from IBM (44x) and Freescale (85xx).
-	  For support for 64-bit processors, set ARCH=powerpc.
-	  Unless you are building a kernel for one of the embedded processor
-	  systems, choose 6xx.
-	  Also note that because the 52xx, 82xx family have a 603e
-	  core, specific support for that chipset is asked later on.
-
-config 40x
-	bool "40x"
-	select PPC_DCR_NATIVE
-
-config 44x
-	bool "44x"
-	select PPC_DCR_NATIVE
-
-config 8xx
-	bool "8xx"
-	select PPC_LIB_RHEAP
-
-endchoice
-
-config PPC_FPU
-	bool
-
-config PPC_DCR_NATIVE
-	bool
-	default n
-
-config PPC_DCR
-	bool
-	depends on PPC_DCR_NATIVE
-	default y
-
-config PTE_64BIT
-	bool
-	depends on 44x
-	default y if 44x
-
-config PHYS_64BIT
-	bool
-	depends on 44x
-	default y if 44x
-	---help---
-	  This option enables kernel support for larger than 32-bit physical
-	  addresses.  This features is not be available on all e500 cores.
-
-	  If in doubt, say N here.
-
-config ALTIVEC
-	bool "AltiVec Support"
-	depends on 6xx
-	depends on !8260
-	---help---
-	  This option enables kernel support for the Altivec extensions to the
-	  PowerPC processor. The kernel currently supports saving and restoring
-	  altivec registers, and turning on the 'altivec enable' bit so user
-	  processes can execute altivec instructions.
-
-	  This option is only usefully if you have a processor that supports
-	  altivec (G4, otherwise known as 74xx series), but does not have
-	  any affect on a non-altivec cpu (it does, however add code to the
-	  kernel).
-
-	  If in doubt, say Y here.
-
-config TAU
-	bool "Thermal Management Support"
-	depends on 6xx && !8260
-	help
-	  G3 and G4 processors have an on-chip temperature sensor called the
-	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
-	  temperature within 2-4 degrees Celsius. This option shows the current
-	  on-die temperature in /proc/cpuinfo if the cpu supports it.
-
-	  Unfortunately, on some chip revisions, this sensor is very inaccurate
-	  and in some cases, does not work at all, so don't assume the cpu
-	  temp is actually what /proc/cpuinfo says it is.
-
-config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
-	depends on TAU
-	---help---
-	  The TAU supports an interrupt driven mode which causes an interrupt
-	  whenever the temperature goes out of range. This is the fastest way
-	  to get notified the temp has exceeded a range. With this option off,
-	  a timer is used to re-check the temperature periodically.
-
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
-
-config TAU_AVERAGE
-	bool "Average high and low temp"
-	depends on TAU
-	---help---
-	  The TAU hardware can compare the temperature to an upper and lower
-	  bound.  The default behavior is to show both the upper and lower
-	  bound in /proc/cpuinfo. If the range is large, the temperature is
-	  either changing a lot, or the TAU hardware is broken (likely on some
-	  G4's). If the range is small (around 4 degrees), the temperature is
-	  relatively stable.  If you say Y here, a single temperature value,
-	  halfway between the upper and lower bounds, will be reported in
-	  /proc/cpuinfo.
-
-	  If in doubt, say N here.
-
-config MATH_EMULATION
-	bool "Math emulation"
-	depends on 4xx || 8xx
-	---help---
-	  Some PowerPC chips designed for embedded applications do not have
-	  a floating-point unit and therefore do not implement the
-	  floating-point instructions in the PowerPC instruction set.  If you
-	  say Y here, the kernel will include code to emulate a floating-point
-	  unit, which will allow programs that use floating-point
-	  instructions to run.
-
-	  If you have an Apple machine or an IBM RS/6000 or pSeries machine,
-	  or any machine with a 6xx, 7xx or 7xxx series processor, say N
-	  here.  Saying Y here will not hurt performance (on any machine) but
-	  will increase the size of the kernel.
-
-config KEXEC
-	bool "kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  The name comes from the similarity to the exec system call.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
-
-	  In the GameCube implementation, kexec allows you to load and
-	  run DOL files, including kernel and homebrew DOLs.
-
-source "drivers/cpufreq/Kconfig"
-
-config PPC601_SYNC_FIX
-	bool "Workarounds for PPC601 bugs"
-	depends on 6xx && PPC_PREP
-	help
-	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
-	  mean that extra synchronization instructions are required near
-	  certain instructions, typically those that make major changes to the
-	  CPU state.  These extra instructions reduce performance slightly.
-	  If you say N here, these extra instructions will not be included,
-	  resulting in a kernel which will run faster but may not run at all
-	  on some systems with the PPC601 chip.
-
-	  If in doubt, say Y here.
-
-source arch/ppc/platforms/4xx/Kconfig
-
-config PPC_STD_MMU
-	bool
-	depends on 6xx
-	default y
-
-config NOT_COHERENT_CACHE
-	bool
-	depends on 4xx || 8xx
-	default y
-
-endmenu
-
-menu "Platform options"
-
-config FADS
-	bool
-
-choice
-	prompt "8xx Machine Type"
-	depends on 8xx
-	default RPXLITE
-
-config RPXLITE
-	bool "RPX-Lite"
-	---help---
-	  Single-board computers based around the PowerPC MPC8xx chips and
-	  intended for embedded applications.  The following types are
-	  supported:
-
-	  RPX-Lite:
-	  Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
-
-	  RPX-Classic:
-	  Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
-	  the MPC 860
-
-	  BSE-IP:
-	  Bright Star Engineering ip-Engine.
-
-	  TQM823L:
-	  TQM850L:
-	  TQM855L:
-	  TQM860L:
-	  MPC8xx based family of mini modules, half credit card size,
-	  up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
-	  2 x CAN bus interface, ...
-	  Manufacturer: TQ Components, www.tq-group.de
-	  Date of Release: October (?) 1999
-	  End of Life: not yet :-)
-	  URL:
-	  - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
-	  - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
-	  - images: <http://www.denx.de/embedded-ppc-en.html>
-
-	  FPS850L:
-	  FingerPrint Sensor System (based on TQM850L)
-	  Manufacturer: IKENDI AG, <http://www.ikendi.com/>
-	  Date of Release: November 1999
-	  End of life: end 2000 ?
-	  URL: see TQM850L
-
-	  IVMS8:
-	  MPC860 based board used in the "Integrated Voice Mail System",
-	  Small Version (8 voice channels)
-	  Manufacturer: Speech Design, <http://www.speech-design.de/>
-	  Date of Release: December 2000 (?)
-	  End of life: -
-	  URL: <http://www.speech-design.de/>
-
-	  IVML24:
-	  MPC860 based board used in the "Integrated Voice Mail System",
-	  Large Version (24 voice channels)
-	  Manufacturer: Speech Design, <http://www.speech-design.de/>
-	  Date of Release: March 2001  (?)
-	  End of life: -
-	  URL: <http://www.speech-design.de/>
-
-	  HERMES:
-	  Hermes-Pro ISDN/LAN router with integrated 8 x hub
-	  Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
-	  <http://www.multidata.de/>
-	  Date of Release: 2000 (?)
-	  End of life: -
-	  URL: <http://www.multidata.de/english/products/hpro.htm>
-
-	  IP860:
-	  VMEBus IP (Industry Pack) carrier board with MPC860
-	  Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
-	  Date of Release: ?
-	  End of life: -
-	  URL: <http://www.microsys.de/html/ip860.html>
-
-	  PCU_E:
-	  PCU = Peripheral Controller Unit, Extended
-	  Manufacturer: Siemens AG, ICN (Information and Communication Networks)
-	  	<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
-	  Date of Release: April 2001
-	  End of life: August 2001
-	  URL: n. a.
-
-config RPXCLASSIC
-	bool "RPX-Classic"
-	help
-	  The RPX-Classic is a single-board computer based on the Motorola
-	  MPC860.  It features 16MB of DRAM and a variable amount of flash,
-	  I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
-	  LEDs.  Variants with Ethernet ports exist.  Say Y here to support it
-	  directly.
-
-config BSEIP
-	bool "BSE-IP"
-	help
-	  Say Y here to support the Bright Star Engineering ipEngine SBC.
-	  This is a credit-card-sized device featuring a MPC823 processor,
-	  26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
-	  controller, and two RS232 ports.
-
-config MPC8XXFADS
-	bool "FADS"
-	select FADS
-
-config TQM823L
-	bool "TQM823L"
-	help
-	  Say Y here to support the TQM823L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM850L
-	bool "TQM850L"
-	help
-	  Say Y here to support the TQM850L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM855L
-	bool "TQM855L"
-	help
-	  Say Y here to support the TQM855L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM860L
-	bool "TQM860L"
-	help
-	  Say Y here to support the TQM860L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config FPS850L
-	bool "FPS850L"
-
-config IVMS8
-	bool "IVMS8"
-	help
-	  Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
-	  from Speech Design, released March 2001.  The manufacturer's website
-	  is at <http://www.speech-design.de/>.
-
-config IVML24
-	bool "IVML24"
-	help
-	  Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
-	  from Speech Design, released March 2001.  The manufacturer's website
-	  is at <http://www.speech-design.de/>.
-
-config HERMES_PRO
-	bool "HERMES"
-
-config IP860
-	bool "IP860"
-
-config LWMON
-	bool "LWMON"
-
-config PCU_E
-	bool "PCU_E"
-
-config CCM
-	bool "CCM"
-
-config LANTEC
-	bool "LANTEC"
-
-config MBX
-	bool "MBX"
-	help
-	  MBX is a line of Motorola single-board computer based around the
-	  MPC821 and MPC860 processors, and intended for embedded-controller
-	  applications.  Say Y here to support these boards directly.
-
-config WINCEPT
-	bool "WinCept"
-	help
-	  The Wincept 100/110 is a Motorola single-board computer based on the
-	  MPC821 PowerPC, introduced in 1998 and designed to be used in
-	  thin-client machines.  Say Y to support it directly.
-
-endchoice
-
-choice
-	prompt "Machine Type"
-	depends on 6xx
-	default PPC_PREP
-	---help---
-	  Linux currently supports several different kinds of PowerPC-based
-	  machines: Apple Power Macintoshes and clones (such as the Motorola
-	  Starmax series), PReP (PowerPC Reference Platform) machines (such
-	  as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
-	  and some IBM RS/6000 systems), CHRP (Common Hardware Reference
-	  Platform) machines (including all of the recent IBM RS/6000 and
-	  pSeries machines), and several embedded PowerPC systems containing
-	  4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors.  Currently, the
-	  default option is to build a kernel which works on PReP.
-
-	  Note that support for Apple and CHRP machines is now only available
-	  with ARCH=powerpc, and has been removed from this menu.  If you
-	  wish to build a kernel for an Apple or CHRP machine, exit this
-	  configuration process and re-run it with ARCH=powerpc.
-
-	  Select PReP if configuring for a PReP machine.
-
-config PPC_PREP
-	bool "PReP"
-
-config KATANA
-	bool "Artesyn-Katana"
-	help
-	  Select KATANA if configuring an Artesyn KATANA 750i or 3750
-	  cPCI board.
-
-config WILLOW
-	bool "Cogent-Willow"
-
-config CPCI690
-	bool "Force-CPCI690"
-	help
-	  Select CPCI690 if configuring a Force CPCI690 cPCI board.
-
-config POWERPMC250
-	bool "Force-PowerPMC250"
-
-config CHESTNUT
-	bool "IBM 750FX Eval board or 750GX Eval board"
-	help
-	  Select CHESTNUT if configuring an IBM 750FX Eval Board or a
-	  IBM 750GX Eval board.
-
-config SPRUCE
-	bool "IBM-Spruce"
-	select PPC_INDIRECT_PCI
-
-config HDPU
-	bool "Sky-HDPU"
-	help
-	  Select HDPU if configuring a Sky Computers Compute Blade.
-
-config HDPU_FEATURES
-	depends on HDPU
-	tristate "HDPU-Features"
-	help
-	  Select to enable HDPU enhanced features.
-
-config EV64260
-	bool "Marvell-EV64260BP"
-	help
-	  Select EV64260 if configuring a Marvell (formerly Galileo)
-	  EV64260BP Evaluation platform.
-
-config LOPEC
-	bool "Motorola-LoPEC"
-	select PPC_I8259
-
-config MVME5100
-	bool "Motorola-MVME5100"
-	select PPC_INDIRECT_PCI
-
-config PPLUS
-	bool "Motorola-PowerPlus"
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-
-config PRPMC750
-	bool "Motorola-PrPMC750"
-	select PPC_INDIRECT_PCI
-
-config PRPMC800
-	bool "Motorola-PrPMC800"
-	select PPC_INDIRECT_PCI
-
-config SANDPOINT
-	bool "Motorola-Sandpoint"
-	select PPC_I8259
-	help
-	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
-	  (any flavor).
-
-config RADSTONE_PPC7D
-	bool "Radstone Technology PPC7D board"
-	select PPC_I8259
-
-config PAL4
-	bool "SBS-Palomar4"
-
-config EST8260
-	bool "EST8260"
-	---help---
-	  The EST8260 is a single-board computer manufactured by Wind River
-	  Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
-	  the MPC8260.  Wind River Systems has a website at
-	  <http://www.windriver.com/>, but the EST8260 cannot be found on it
-	  and has probably been discontinued or rebadged.
-
-config SBC82xx
-	bool "SBC82xx"
-	---help---
-	  SBC PowerQUICC II, single-board computer with MPC82xx CPU
-	  Manufacturer: Wind River Systems, Inc.
-	  Date of Release: May 2003
-	  End of Life: -
-	  URL: <http://www.windriver.com/>
-
-config SBS8260
-	bool "SBS8260"
-
-config RPX8260
-	bool "RPXSUPER"
-
-config TQM8260
-	bool "TQM8260"
-	---help---
-	  MPC8260 based module, little larger than credit card,
-	  up to 128 MB global + 64 MB local RAM, 32 MB Flash,
-	  32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
-	  2 x serial ports, ...
-	  Manufacturer: TQ Components, www.tq-group.de
-	  Date of Release: June 2001
-	  End of Life: not yet :-)
-	  URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-config PQ2FADS
-	bool "Freescale-PQ2FADS"
-	help
-	  Select PQ2FADS if you wish to configure for a Freescale
-	  PQ2FADS board (-VR or -ZU).
-
-config LITE5200
-	bool "Freescale LITE5200 / (IceCube)"
-	select PPC_MPC52xx
-	help
-	  Support for the LITE5200 dev board for the MPC5200 from Freescale.
-	  This is for the LITE5200 version 2.0 board. Don't know if it changes
-	  much but it's only been tested on this board version. I think this
-	  board is also known as IceCube.
-
-config LITE5200B
-	bool "Freescale LITE5200B"
-	depends on LITE5200
-	help
-	  Support for the LITE5200B dev board for the MPC5200 from Freescale.
-	  This is the new board with 2 PCI slots.
-
-config EV64360
-	bool "Marvell-EV64360BP"
-	help
-	  Select EV64360 if configuring a Marvell EV64360BP Evaluation
-	  platform.
-endchoice
-
-config TQM8xxL
-	bool
-	depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
-	default y
-
-config EMBEDDEDBOOT
-	bool
-	depends on 8xx || 8260
-	default y
-
-config PPC_MPC52xx
-	bool
-
-config 8260
-	bool "CPM2 Support" if WILLOW
-	depends on 6xx
-	default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
-	help
-	  The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
-	  this option means that you wish to build a kernel for a machine with
-	  an 8260 class CPU.
-
-config CPM1
-	bool
-	depends on 8xx
-	default y
-	help
-	  The CPM1 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM1 coprocessor
-	  on it (8xx, 827x, 8560).
-
-config CPM2
-	bool
-	depends on 8260 || MPC8560 || MPC8555
-	select PPC_LIB_RHEAP
-	default y
-	help
-	  The CPM2 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM2 coprocessor
-	  on it (826x, 827x, 8560).
-
-config PPC_GEN550
-	bool
-	depends on SANDPOINT || SPRUCE || PPLUS || \
-		PRPMC750 || PRPMC800 || LOPEC || \
-		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D
-	default y
-
-config FORCE
-	bool
-	depends on 6xx && POWERPMC250
-	default y
-
-config GT64260
-	bool
-	depends on EV64260 || CPCI690
-	default y
-
-config MV64360		# Really MV64360 & MV64460
-	bool
-	depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
-	default y
-
-config MV64X60
-	bool
-	depends on (GT64260 || MV64360)
-	select PPC_INDIRECT_PCI
-	default y
-
-config MV643XX_ETH_0
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360 || HDPU)
-	default y
-
-config MV643XX_ETH_1
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
-	default y
-
-config MV643XX_ETH_2
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
-	default y
-
-menu "Set bridge options"
-	depends on MV64X60
-
-config NOT_COHERENT_CACHE
-	bool "Turn off Cache Coherency"
-	default n
-	help
-	  Some 64x60 bridges lock up when trying to enforce cache coherency.
-	  When this option is selected, cache coherency will be turned off.
-	  Note that this can cause other problems (e.g., stale data being
-	  speculatively loaded via a cached mapping).  Use at your own risk.
-
-config MV64X60_BASE
-	hex "Set bridge base used by firmware"
-	default "0xf1000000"
-	help
-	  A firmware can leave the base address of the bridge's registers at
-	  a non-standard location.  If so, set this value to reflect the
-	  address of that non-standard location.
-
-config MV64X60_NEW_BASE
-	hex "Set bridge base used by kernel"
-	default "0xf1000000"
-	help
-	  If the current base address of the bridge's registers is not where
-	  you want it, set this value to the address that you want it moved to.
-
-endmenu
-
-config NONMONARCH_SUPPORT
-	bool "Enable Non-Monarch Support"
-	depends on PRPMC800
-
-config HARRIER
-	bool
-	depends on PRPMC800
-	default y
-
-config EPIC_SERIAL_MODE
-	bool
-	depends on 6xx && (LOPEC || SANDPOINT)
-	default y
-
-config MPC10X_BRIDGE
-	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
-	select PPC_INDIRECT_PCI
-	default y
-
-config MPC10X_OPENPIC
-	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
-	default y
-
-config MPC10X_STORE_GATHERING
-	bool "Enable MPC10x store gathering"
-	depends on MPC10X_BRIDGE
-
-config SANDPOINT_ENABLE_UART1
-	bool "Enable DUART mode on Sandpoint"
-	depends on SANDPOINT
-	help
-	  If this option is enabled then the MPC824x processor will run
-	  in DUART mode instead of UART mode.
-
-config HARRIER_STORE_GATHERING
-	bool "Enable Harrier store gathering"
-	depends on HARRIER
-
-config MVME5100_IPMC761_PRESENT
-	bool "MVME5100 configured with an IPMC761"
-	depends on MVME5100
-	select PPC_I8259
-
-config SPRUCE_BAUD_33M
-	bool "Spruce baud clock support"
-	depends on SPRUCE
-
-config PC_KEYBOARD
-	bool "PC PS/2 style Keyboard"
-	depends on 4xx || CPM2
-
-config PPCBUG_NVRAM
-	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
-	default y if PPC_PREP
-
-config SMP
-	depends on PPC_STD_MMU
-	bool "Symmetric multi-processing support"
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, say N. If you have a system with more
-	  than one CPU, say Y.  Note that the kernel does not currently
-	  support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
-	  since they have inadequate hardware support for multiprocessor
-	  operation.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on single-processor machines.
-	  On a single-processor machine, the kernel will run faster if you say
-	  N here.
-
-	  If you don't know what to do here, say N.
-
-config IRQ_ALL_CPUS
-	bool "Distribute interrupts on all CPUs by default"
-	depends on SMP && !MV64360
-	help
-	  This option gives the kernel permission to distribute IRQs across
-	  multiple CPUs.  Saying N here will route all IRQs to the first
-	  CPU.  Generally saying Y is safe, although some problems have been
-	  reported with SMP Power Macintoshes with this option enabled.
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
-	depends on SMP
-	default "4"
-
-config HIGHMEM
-	bool "High memory support"
-
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
-source kernel/Kconfig.hz
-source kernel/Kconfig.preempt
-source "mm/Kconfig"
-
-source "fs/Kconfig.binfmt"
-
-config PREP_RESIDUAL
-	bool "Support for PReP Residual Data"
-	depends on PPC_PREP
-	help
-	  Some PReP systems have residual data passed to the kernel by the
-	  firmware.  This allows detection of memory size, devices present and
-	  other useful pieces of information.  Sometimes this information is
-	  not present or incorrect, in which case it could lead to the machine 
-	  behaving incorrectly.  If this happens, either disable PREP_RESIDUAL
-	  or pass the 'noresidual' option to the kernel.
-
-	  If you are running a PReP system, say Y here, otherwise say N.
-
-config PROC_PREPRESIDUAL
-	bool "Support for reading of PReP Residual Data in /proc"
-	depends on PREP_RESIDUAL && PROC_FS
-	help
-	  Enabling this option will create a /proc/residual file which allows
-	  you to get at the residual data on PReP systems.  You will need a tool
-	  (lsresidual) to parse it.  If you aren't on a PReP system, you don't
-	  want this.
-
-config CMDLINE_BOOL
-	bool "Default bootloader kernel arguments"
-
-config CMDLINE
-	string "Initial kernel command string"
-	depends on CMDLINE_BOOL
-	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
-	help
-	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel. For these platforms, you can supply
-	  some command-line options at build time by entering them here.  In
-	  most cases you will need to specify the root device here.
-
-if BROKEN
-source kernel/power/Kconfig
-endif
-
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
-endmenu
-
-config ISA_DMA_API
-	bool
-	default y
-
-menu "Bus options"
-
-config ISA
-	bool "Support for ISA-bus hardware"
-	depends on PPC_PREP
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  If you have an Apple machine, say N here; if you
-	  have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
-	  you have an embedded board, consult your board documentation.
-
-config ZONE_DMA
-	bool
-	default y
-
-config GENERIC_ISA_DMA
-	bool
-	depends on 6xx && !CPM2
-	default y
-
-config PPC_I8259
-	bool
-	default y if PPC_PREP
-	default n
-
-config PPC_INDIRECT_PCI
-	bool
-	depends on PCI
-	default y if 40x || 44x || PPC_PREP
-	default n
-
-config EISA
-	bool
-	help
-	  The Extended Industry Standard Architecture (EISA) bus is a bus
-	  architecture used on some older intel-based PCs.
-
-config SBUS
-	bool
-
-# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
-config MCA
-	bool
-
-config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_MPC52xx
-	default y if !40x && !CPM2 && !8xx
-	default PCI_QSPAN if !4xx && !CPM2 && 8xx
-	help
-	  Find out whether your system includes a PCI bus. PCI is the name of
-	  a bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box.  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support PCI bus devices.
-
-config PCI_DOMAINS
-	def_bool PCI
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config PCI_QSPAN
-	bool "QSpan PCI"
-	depends on !4xx && !CPM2 && 8xx
-	select PPC_I8259
-	help
-	  Say Y here if you have a system based on a Motorola 8xx-series
-	  embedded processor with a QSPAN PCI interface, otherwise say N.
-
-config PCI_8260
-	bool
-	depends on PCI && 8260
-	select PPC_INDIRECT_PCI
-	default y
-
-config 8260_PCI9
-	bool "Enable workaround for MPC826x erratum PCI 9"
-	depends on PCI_8260
-	default y
-
-choice
-	prompt "IDMA channel for PCI 9 workaround"
-	depends on 8260_PCI9
-
-config 8260_PCI9_IDMA1
-	bool "IDMA1"
-
-config 8260_PCI9_IDMA2
-	bool "IDMA2"
-
-config 8260_PCI9_IDMA3
-	bool "IDMA3"
-
-config 8260_PCI9_IDMA4
-	bool "IDMA4"
-
-endchoice
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-config RAPIDIO
-	bool "RapidIO support" if MPC8540 || MPC8560
-	help
-	  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support RapidIO interconnect devices.
-
-source "drivers/rapidio/Kconfig"
-
-endmenu
-
-menu "Advanced setup"
-
-config ADVANCED_OPTIONS
-	bool "Prompt for advanced kernel configuration options"
-	help
-	  This option will enable prompting for a variety of advanced kernel
-	  configuration options.  These options can cause the kernel to not
-	  work if they are set incorrectly, but can be used to optimize certain
-	  aspects of kernel memory management.
-
-	  Unless you know what you are doing, say N here.
-
-comment "Default settings for advanced configuration options are used"
-	depends on !ADVANCED_OPTIONS
-
-config HIGHMEM_START_BOOL
-	bool "Set high memory pool address"
-	depends on ADVANCED_OPTIONS && HIGHMEM
-	help
-	  This option allows you to set the base address of the kernel virtual
-	  area used to map high memory pages.  This can be useful in
-	  optimizing the layout of kernel virtual memory.
-
-	  Say N here unless you know what you are doing.
-
-config HIGHMEM_START
-	hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
-	default "0xfe000000"
-
-config LOWMEM_SIZE_BOOL
-	bool "Set maximum low memory"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the maximum amount of memory which
-	  will be used as "low memory", that is, memory which the kernel can
-	  access directly, without having to set up a kernel virtual mapping.
-	  This can be useful in optimizing the layout of kernel virtual
-	  memory.
-
-	  Say N here unless you know what you are doing.
-
-config LOWMEM_SIZE
-	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
-	default "0x30000000"
-
-config KERNEL_START_BOOL
-	bool "Set custom kernel base address"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the kernel virtual address at which
-	  the kernel will map low memory (the kernel image will be linked at
-	  this address).  This can be useful in optimizing the virtual memory
-	  layout of the system.
-
-	  Say N here unless you know what you are doing.
-
-config KERNEL_START
-	hex "Virtual address of kernel base" if KERNEL_START_BOOL
-	default "0xc0000000"
-
-config TASK_SIZE_BOOL
-	bool "Set custom user task size"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the amount of virtual address space
-	  allocated to user tasks.  This can be useful in optimizing the
-	  virtual memory layout of the system.
-
-	  Say N here unless you know what you are doing.
-
-config TASK_SIZE
-	hex "Size of user task space" if TASK_SIZE_BOOL
-	default "0x80000000"
-
-config CONSISTENT_START_BOOL
-	bool "Set custom consistent memory pool address"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the base virtual address
-	  of the consistent memory pool.  This pool of virtual
-	  memory is used to make consistent memory allocations.
-
-config CONSISTENT_START
-	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
-	default "0xff100000" if NOT_COHERENT_CACHE
-
-config CONSISTENT_SIZE_BOOL
-	bool "Set custom consistent memory pool size"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the size of the
-	  consistent memory pool.  This pool of virtual memory
-	  is used to make consistent memory allocations.
-
-config CONSISTENT_SIZE
-	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
-	default "0x00200000" if NOT_COHERENT_CACHE
-
-config BOOT_LOAD_BOOL
-	bool "Set the boot link/load address"
-	depends on ADVANCED_OPTIONS && !PPC_PREP
-	help
-	  This option allows you to set the initial load address of the zImage
-	  or zImage.initrd file.  This can be useful if you are on a board
-	  which has a small amount of memory.
-
-	  Say N here unless you know what you are doing.
-
-config BOOT_LOAD
-	hex "Link/load address for booting" if BOOT_LOAD_BOOL
-	default "0x00400000" if 40x || 8xx || 8260
-	default "0x01000000" if 44x
-	default "0x00800000"
-
-config PIN_TLB
-	bool "Pinned Kernel TLBs (860 ONLY)"
-	depends on ADVANCED_OPTIONS && 8xx
-
-config PPC_LIB_RHEAP
-	bool
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/ppc/8xx_io/Kconfig"
-
-source "arch/ppc/8260_io/Kconfig"
-
-
-menu "IBM 40x options"
-	depends on 40x
-
-config SERIAL_SICC
-	bool "SICC Serial port"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-config SERIAL_SICC_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-endmenu
-
-source "lib/Kconfig"
-
-source "arch/ppc/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug
deleted file mode 100644
index f94b87740973..000000000000
--- a/arch/ppc/Kconfig.debug
+++ /dev/null
@@ -1,66 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config KGDB
-	bool "Include kgdb kernel debugger"
-	depends on DEBUG_KERNEL && (BROKEN || PPC_GEN550 || 4xx)
-	select DEBUG_INFO
-	help
-	  Include in-kernel hooks for kgdb, the Linux kernel source level
-	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
-	  Unless you are intending to debug the kernel, say N here.
-
-choice
-	prompt "Serial Port"
-	depends on KGDB
-	default KGDB_TTYS1
-
-config KGDB_TTYS0
-	bool "ttyS0"
-
-config KGDB_TTYS1
-	bool "ttyS1"
-
-config KGDB_TTYS2
-	bool "ttyS2"
-
-config KGDB_TTYS3
-	bool "ttyS3"
-
-endchoice
-
-config KGDB_CONSOLE
-	bool "Enable serial console thru kgdb port"
-	depends on KGDB && 8xx || CPM2
-	help
-	  If you enable this, all serial console messages will be sent
-	  over the gdb stub.
-	  If unsure, say N.
-
-config XMON
-	bool "Include xmon kernel debugger"
-	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel hooks for the xmon kernel monitor/debugger.
-	  Unless you are intending to debug the kernel, say N here.
-
-config BDI_SWITCH
-	bool "Include BDI-2000 user context switcher"
-	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel support for the Abatron BDI2000 debugger.
-	  Unless you are intending to debug the kernel with one of these
-	  machines, say N here.
-
-config SERIAL_TEXT_DEBUG
-	bool "Support for early boot texts over serial port"
-	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
-		PPC_GEN550 || PPC_MPC52xx
-
-config PPC_OCP
-	bool
-	depends on IBM_OCP
-	default y
-
-endmenu
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
deleted file mode 100644
index 2352d139b262..000000000000
--- a/arch/ppc/Makefile
+++ /dev/null
@@ -1,135 +0,0 @@
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Changes for PPC by Gary Thomas
-# Rewritten by Cort Dougan and Paul Mackerras
-#
-
-# This must match PAGE_OFFSET in include/asm-ppc/page.h.
-KERNELLOAD	:= $(CONFIG_KERNEL_START)
-
-HAS_BIARCH	:= $(call cc-option-yn, -m32)
-ifeq ($(HAS_BIARCH),y)
-AS		:= $(AS) -a32
-LD		:= $(LD) -m elf32ppc
-CC		:= $(CC) -m32
-endif
-
-LDFLAGS_vmlinux	:= -Ttext $(KERNELLOAD) -Bstatic
-# The -Iarch/$(ARCH)/include is temporary while we are merging
-KBUILD_CPPFLAGS	+= -Iarch/$(ARCH) -Iarch/$(ARCH)/include
-KBUILD_AFLAGS	+= -Iarch/$(ARCH)
-KBUILD_CFLAGS	+= -Iarch/$(ARCH) -msoft-float -pipe \
-		-ffixed-r2 -mmultiple
-
-# No AltiVec instruction when building kernel
-KBUILD_CFLAGS	+= $(call cc-option, -mno-altivec)
-
-CPP		= $(CC) -E $(KBUILD_CFLAGS)
-# Temporary hack until we have migrated to asm-powerpc
-LINUXINCLUDE    += -Iarch/$(ARCH)/include
-
-CHECKFLAGS	+= -D__powerpc__
-
-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
-cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
-
-KBUILD_AFLAGS += $(cpu-as-y)
-KBUILD_CFLAGS += $(cpu-as-y)
-
-# Default to the common case.
-KBUILD_DEFCONFIG := ebony_defconfig
-
-head-y				:= arch/ppc/kernel/head.o
-head-$(CONFIG_8xx)		:= arch/ppc/kernel/head_8xx.o
-head-$(CONFIG_4xx)		:= arch/ppc/kernel/head_4xx.o
-head-$(CONFIG_44x)		:= arch/ppc/kernel/head_44x.o
-
-head-$(CONFIG_PPC_FPU)		+= arch/powerpc/kernel/fpu.o
-
-core-y				+= arch/ppc/kernel/ arch/powerpc/kernel/ \
-				   arch/ppc/platforms/ \
-				   arch/ppc/mm/ arch/ppc/lib/ \
-				   arch/ppc/syslib/ arch/powerpc/sysdev/ \
-				   arch/powerpc/lib/
-core-$(CONFIG_4xx)		+= arch/ppc/platforms/4xx/
-core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
-core-$(CONFIG_XMON)		+= arch/ppc/xmon/
-drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
-drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
-drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
-
-drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
-
-BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
-
-PHONY += $(BOOT_TARGETS)
-
-all: uImage zImage
-
-CPPFLAGS_vmlinux.lds	:= -Upowerpc
-
-# All the instructions talk about "make bzImage".
-bzImage: zImage
-
-boot := arch/$(ARCH)/boot
-
-$(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $@
-
-uImage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot)/images $(boot)/images/$@
-
-define archhelp
-  @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)'
-  @echo '  uImage          - Create a bootable image for U-Boot / PPCBoot'
-  @echo '  install         - Install kernel using'
-  @echo '                    (your) ~/bin/installkernel or'
-  @echo '                    (distribution) /sbin/installkernel or'
-  @echo '                    install to $$(INSTALL_PATH) and run lilo'
-  @echo '  *_defconfig     - Select default config from arch/$(ARCH)/ppc/configs'
-endef
-
-archclean:
-	$(Q)$(MAKE) $(clean)=arch/ppc/boot
-	# Temporary hack until we have migrated to asm-powerpc
-	$(Q)rm -rf arch/$(ARCH)/include
-
-archprepare: checkbin
-
-# Temporary hack until we have migrated to asm-powerpc
-include/asm: arch/$(ARCH)/include/asm
-arch/$(ARCH)/include/asm:
-	$(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
-	$(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
-
-# Use the file '.tmp_gas_check' for binutils tests, as gas won't output
-# to stdout and these checks are run even on install targets.
-TOUT	:= .tmp_gas_check
-# Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec
-# instructions.
-# gcc-3.4 and binutils-2.14 are a fatal combination.
-
-checkbin:
-	@if test "$(call cc-version)" = "0304" ; then \
-		if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
-			echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
-			echo 'correctly with gcc-3.4 and your version of binutils.'; \
-			echo '*** Please upgrade your binutils or downgrade your gcc'; \
-			false; \
-		fi ; \
-	fi
-	@if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
-		echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
-		echo 'correctly with old versions of binutils.' ; \
-		echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
-		false ; \
-	fi
-
-CLEAN_FILES += $(TOUT)
-
diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile
deleted file mode 100644
index 500497e3c72d..000000000000
--- a/arch/ppc/boot/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# arch/ppc/boot/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Adapted for PowerPC by Gary Thomas
-# modified by Cort (cort@cs.nmt.edu)
-#
-
-# KBUILD_CFLAGS used when building rest of boot (takes effect recursively)
-KBUILD_CFLAGS 	+= -fno-builtin -D__BOOTER__ -Iarch/$(ARCH)/boot/include
-HOSTCFLAGS	+= -Iarch/$(ARCH)/boot/include
-
-BOOT_TARGETS	= zImage zImage.initrd znetboot znetboot.initrd
-
-bootdir-y			:= simple
-subdir-y			:= lib common images
-subdir-$(CONFIG_PPC_PREP)	+= of1275
-
-# for cleaning
-subdir-				+= simple
-
-hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree)
-
-PHONY += $(BOOT_TARGETS) $(bootdir-y)
-
-$(BOOT_TARGETS): $(bootdir-y)
-
-$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
-		$(addprefix $(obj)/,$(hostprogs-y))
-	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
diff --git a/arch/ppc/boot/common/Makefile b/arch/ppc/boot/common/Makefile
deleted file mode 100644
index a2e85e3beb88..000000000000
--- a/arch/ppc/boot/common/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Tom Rini	January 2001
-#
-
-lib-y					:= string.o util.o misc-common.o \
-						serial_stub.o bootinfo.o
-lib-$(CONFIG_SERIAL_8250_CONSOLE)	+= ns16550.o
diff --git a/arch/ppc/boot/common/bootinfo.c b/arch/ppc/boot/common/bootinfo.c
deleted file mode 100644
index f4dc9b9fab9c..000000000000
--- a/arch/ppc/boot/common/bootinfo.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * General bootinfo record utilities
- * Author: Randy Vinson <rvinson@mvista.com>
- *
- * 2002 (c) MontaVista Software, Inc. This file is licensed under the terms
- * of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/bootinfo.h>
-
-#include "nonstdio.h"
-
-static struct bi_record * birec = NULL;
-
-static struct bi_record *
-__bootinfo_build(struct bi_record *rec, unsigned long tag, unsigned long size,
-		 void *data)
-{
-	/* set the tag */
-	rec->tag = tag;
-
-	/* if the caller has any data, copy it */
-	if (size)
-		memcpy(rec->data, (char *)data, size);
-
-	/* set the record size */
-	rec->size = sizeof(struct bi_record) + size;
-
-	/* advance to the next available space */
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-	return rec;
-}
-
-void
-bootinfo_init(struct bi_record *rec)
-{
-
-	/* save start of birec area */
-	birec = rec;
-
-	/* create an empty list */
-	rec = __bootinfo_build(rec, BI_FIRST, 0, NULL);
-	(void) __bootinfo_build(rec, BI_LAST, 0, NULL);
-
-}
-
-void
-bootinfo_append(unsigned long tag, unsigned long size, void * data)
-{
-
-	struct bi_record *rec = birec;
-
-	/* paranoia */
-	if ((rec == NULL) || (rec->tag != BI_FIRST))
-		return;
-
-	/* find the last entry in the list */
-	while (rec->tag != BI_LAST)
-		rec = (struct bi_record *)((ulong)rec + rec->size);
-
-	/* overlay BI_LAST record with new one and tag on a new BI_LAST */
-	rec = __bootinfo_build(rec, tag, size, data);
-	(void) __bootinfo_build(rec, BI_LAST, 0, NULL);
-}
diff --git a/arch/ppc/boot/common/crt0.S b/arch/ppc/boot/common/crt0.S
deleted file mode 100644
index 8f0ef04b8de5..000000000000
--- a/arch/ppc/boot/common/crt0.S
+++ /dev/null
@@ -1,80 +0,0 @@
-/*    Copyright (c) 1997 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Initial Power Macintosh COFF version.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      Modifications for IBM PowerPC 400-class processor evaluation
- *      boards.
- *
- *    Module name: crt0.S
- *
- *    Description:
- *      Boot loader execution entry point. Clears out .bss section as per
- *      ANSI C requirements. Invalidates and flushes the caches over the
- *      range covered by the boot loader's .text section. Sets up a stack
- *      below the .text section entry point.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- */
-
-#include <asm/ppc_asm.h>
-
-	.text
-
-	.globl	_start
-_start:
-#ifdef XCOFF
-	.long	__start,0,0
-
-	.globl	__start
-__start:
-#endif
-
-	## Flush and invalidate the caches for the range in memory covering
-	## the .text section of the boot loader
-
-	lis	r9,_start@h		# r9 = &_start
-	lis	r8,_etext@ha		#
-	addi	r8,r8,_etext@l		# r8 = &_etext
-3:	dcbf	r0,r9			# Flush the data cache
-	icbi	r0,r9			# Invalidate the instruction cache
-	addi	r9,r9,0x10		# Increment by one cache line
-	cmplw	cr0,r9,r8		# Are we at the end yet?
-	blt	3b			# No, keep flushing and invalidating
-	sync				# sync ; isync after flushing the icache
-	isync
-
-	## Clear out the BSS as per ANSI C requirements
-
-	lis	r7,_end@ha
-	addi	r7,r7,_end@l		# r7 = &_end
-	lis	r8,__bss_start@ha	#
-	addi	r8,r8,__bss_start@l	# r8 = &_bss_start
-
-	## Determine how large an area, in number of words, to clear
-
-	subf	r7,r8,r7		# r7 = &_end - &_bss_start + 1
-	addi	r7,r7,3			# r7 += 3
-	srwi.	r7,r7,2			# r7 = size in words.
-	beq	2f			# If the size is zero, do not bother
-	addi	r8,r8,-4		# r8 -= 4
-	mtctr	r7			# SPRN_CTR = number of words to clear
-	li	r0,0			# r0 = 0
-1:	stwu	r0,4(r8)		# Clear out a word
-	bdnz	1b			# If we are not done yet, keep clearing
-2:
-
-#ifdef CONFIG_40x
-	## Set up the stack
-
-	lis	r9,_start@h		# r9 = &_start (text section entry)
-	ori	r9,r9,_start@l
-	subi	r1,r9,64		# Start the stack 64 bytes below _start
-	clrrwi	r1,r1,4			# Make sure it is aligned on 16 bytes.
-	li	r0,0
-	stwu	r0,-16(r1)
-	mtlr	r9
-#endif
-
-	b	start			# All done, start the real work.
diff --git a/arch/ppc/boot/common/misc-common.c b/arch/ppc/boot/common/misc-common.c
deleted file mode 100644
index 9589969cec72..000000000000
--- a/arch/ppc/boot/common/misc-common.c
+++ /dev/null
@@ -1,555 +0,0 @@
-/*
- * Misc. bootloader code (almost) all platforms can use
- *
- * Author: Johnnie Peters <jpeters@mvista.com>
- * Editor: Tom Rini <trini@mvista.com>
- *
- * Derived from arch/ppc/boot/prep/misc.c
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>	/* for va_ bits */
-#include <linux/string.h>
-#include <linux/zlib.h>
-#include "nonstdio.h"
-
-/* If we're on a PReP, assume we have a keyboard controller
- * Also note, if we're not PReP, we assume you are a serial
- * console - Tom */
-#if defined(CONFIG_PPC_PREP) && defined(CONFIG_VGA_CONSOLE)
-extern void cursor(int x, int y);
-extern void scroll(void);
-extern char *vidmem;
-extern int lines, cols;
-extern int orig_x, orig_y;
-extern int keyb_present;
-extern int CRT_tstc(void);
-extern int CRT_getc(void);
-#else
-int cursor(int x, int y) {return 0;}
-void scroll(void) {}
-char vidmem[1];
-#define lines 0
-#define cols 0
-int orig_x = 0;
-int orig_y = 0;
-#define keyb_present 0
-int CRT_tstc(void) {return 0;}
-int CRT_getc(void) {return 0;}
-#endif
-
-extern char *avail_ram;
-extern char *end_avail;
-extern char _end[];
-
-void puts(const char *);
-void putc(const char c);
-void puthex(unsigned long val);
-void gunzip(void *, int, unsigned char *, int *);
-static int _cvt(unsigned long val, char *buf, long radix, char *digits);
-
-void _vprintk(void(*putc)(const char), const char *fmt0, va_list ap);
-unsigned char *ISA_io = NULL;
-
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-extern unsigned long com_port;
-
-extern int serial_tstc(unsigned long com_port);
-extern unsigned char serial_getc(unsigned long com_port);
-extern void serial_putc(unsigned long com_port, unsigned char c);
-#endif
-
-void pause(void)
-{
-	puts("pause\n");
-}
-
-void exit(void)
-{
-	puts("exit\n");
-	while(1);
-}
-
-int tstc(void)
-{
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	if(keyb_present)
-		return (CRT_tstc() || serial_tstc(com_port));
-	else
-		return (serial_tstc(com_port));
-#else
-	return CRT_tstc();
-#endif
-}
-
-int getc(void)
-{
-	while (1) {
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-		if (serial_tstc(com_port))
-			return (serial_getc(com_port));
-#endif /* serial console */
-		if (keyb_present)
-			if(CRT_tstc())
-				return (CRT_getc());
-	}
-}
-
-void
-putc(const char c)
-{
-	int x,y;
-
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	serial_putc(com_port, c);
-	if ( c == '\n' )
-		serial_putc(com_port, '\r');
-#endif /* serial console */
-
-	x = orig_x;
-	y = orig_y;
-
-	if ( c == '\n' ) {
-		x = 0;
-		if ( ++y >= lines ) {
-			scroll();
-			y--;
-		}
-	} else if (c == '\r') {
-		x = 0;
-	} else if (c == '\b') {
-		if (x > 0) {
-			x--;
-		}
-	} else {
-		vidmem [ ( x + cols * y ) * 2 ] = c;
-		if ( ++x >= cols ) {
-			x = 0;
-			if ( ++y >= lines ) {
-				scroll();
-				y--;
-			}
-		}
-	}
-
-	cursor(x, y);
-
-	orig_x = x;
-	orig_y = y;
-}
-
-void puts(const char *s)
-{
-	int x,y;
-	char c;
-
-	x = orig_x;
-	y = orig_y;
-
-	while ( ( c = *s++ ) != '\0' ) {
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	        serial_putc(com_port, c);
-	        if ( c == '\n' ) serial_putc(com_port, '\r');
-#endif /* serial console */
-
-		if ( c == '\n' ) {
-			x = 0;
-			if ( ++y >= lines ) {
-				scroll();
-				y--;
-			}
-		} else if (c == '\b') {
-		  if (x > 0) {
-		    x--;
-		  }
-		} else {
-			vidmem [ ( x + cols * y ) * 2 ] = c;
-			if ( ++x >= cols ) {
-				x = 0;
-				if ( ++y >= lines ) {
-					scroll();
-					y--;
-				}
-			}
-		}
-	}
-
-	cursor(x, y);
-
-	orig_x = x;
-	orig_y = y;
-}
-
-void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-static void *zalloc(unsigned size)
-{
-	void *p = avail_ram;
-
-	size = (size + 7) & -8;
-	avail_ram += size;
-	if (avail_ram > end_avail) {
-		puts("oops... out of memory\n");
-		pause();
-	}
-	return p;
-}
-
-#define HEAD_CRC	2
-#define EXTRA_FIELD	4
-#define ORIG_NAME	8
-#define COMMENT		0x10
-#define RESERVED	0xe0
-
-void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
-{
-	z_stream s;
-	int r, i, flags;
-
-	/* skip header */
-	i = 10;
-	flags = src[3];
-	if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
-		puts("bad gzipped data\n");
-		exit();
-	}
-	if ((flags & EXTRA_FIELD) != 0)
-		i = 12 + src[10] + (src[11] << 8);
-	if ((flags & ORIG_NAME) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & COMMENT) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & HEAD_CRC) != 0)
-		i += 2;
-	if (i >= *lenp) {
-		puts("gunzip: ran out of data in header\n");
-		exit();
-	}
-
-	/* Initialize ourself. */
-	s.workspace = zalloc(zlib_inflate_workspacesize());
-	r = zlib_inflateInit2(&s, -MAX_WBITS);
-	if (r != Z_OK) {
-		puts("zlib_inflateInit2 returned "); puthex(r); puts("\n");
-		exit();
-	}
-	s.next_in = src + i;
-	s.avail_in = *lenp - i;
-	s.next_out = dst;
-	s.avail_out = dstlen;
-	r = zlib_inflate(&s, Z_FINISH);
-	if (r != Z_OK && r != Z_STREAM_END) {
-		puts("inflate returned "); puthex(r); puts("\n");
-		exit();
-	}
-	*lenp = s.next_out - (unsigned char *) dst;
-	zlib_inflateEnd(&s);
-}
-
-void
-puthex(unsigned long val)
-{
-
-	unsigned char buf[10];
-	int i;
-	for (i = 7;  i >= 0;  i--)
-	{
-		buf[i] = "0123456789ABCDEF"[val & 0x0F];
-		val >>= 4;
-	}
-	buf[8] = '\0';
-	puts(buf);
-}
-
-#define FALSE 0
-#define TRUE  1
-
-void
-_printk(char const *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	_vprintk(putc, fmt, ap);
-	va_end(ap);
-	return;
-}
-
-#define is_digit(c) ((c >= '0') && (c <= '9'))
-
-void
-_vprintk(void(*putc)(const char), const char *fmt0, va_list ap)
-{
-	char c, sign, *cp = 0;
-	int left_prec, right_prec, zero_fill, length = 0, pad, pad_on_right;
-	char buf[32];
-	long val;
-	while ((c = *fmt0++))
-	{
-		if (c == '%')
-		{
-			c = *fmt0++;
-			left_prec = right_prec = pad_on_right = 0;
-			if (c == '-')
-			{
-				c = *fmt0++;
-				pad_on_right++;
-			}
-			if (c == '0')
-			{
-				zero_fill = TRUE;
-				c = *fmt0++;
-			} else
-			{
-				zero_fill = FALSE;
-			}
-			while (is_digit(c))
-			{
-				left_prec = (left_prec * 10) + (c - '0');
-				c = *fmt0++;
-			}
-			if (c == '.')
-			{
-				c = *fmt0++;
-				zero_fill++;
-				while (is_digit(c))
-				{
-					right_prec = (right_prec * 10) + (c - '0');
-					c = *fmt0++;
-				}
-			} else
-			{
-				right_prec = left_prec;
-			}
-			sign = '\0';
-			switch (c)
-			{
-			case 'd':
-			case 'x':
-			case 'X':
-				val = va_arg(ap, long);
-				switch (c)
-				{
-				case 'd':
-					if (val < 0)
-					{
-						sign = '-';
-						val = -val;
-					}
-					length = _cvt(val, buf, 10, "0123456789");
-					break;
-				case 'x':
-					length = _cvt(val, buf, 16, "0123456789abcdef");
-					break;
-				case 'X':
-					length = _cvt(val, buf, 16, "0123456789ABCDEF");
-					break;
-				}
-				cp = buf;
-				break;
-			case 's':
-				cp = va_arg(ap, char *);
-				length = strlen(cp);
-				break;
-			case 'c':
-				c = va_arg(ap, long /*char*/);
-				(*putc)(c);
-				continue;
-			default:
-				(*putc)('?');
-			}
-			pad = left_prec - length;
-			if (sign != '\0')
-			{
-				pad--;
-			}
-			if (zero_fill)
-			{
-				c = '0';
-				if (sign != '\0')
-				{
-					(*putc)(sign);
-					sign = '\0';
-				}
-			} else
-			{
-				c = ' ';
-			}
-			if (!pad_on_right)
-			{
-				while (pad-- > 0)
-				{
-					(*putc)(c);
-				}
-			}
-			if (sign != '\0')
-			{
-				(*putc)(sign);
-			}
-			while (length-- > 0)
-			{
-				(*putc)(c = *cp++);
-				if (c == '\n')
-				{
-					(*putc)('\r');
-				}
-			}
-			if (pad_on_right)
-			{
-				while (pad-- > 0)
-				{
-					(*putc)(c);
-				}
-			}
-		} else
-		{
-			(*putc)(c);
-			if (c == '\n')
-			{
-				(*putc)('\r');
-			}
-		}
-	}
-}
-
-int
-_cvt(unsigned long val, char *buf, long radix, char *digits)
-{
-	char temp[80];
-	char *cp = temp;
-	int length = 0;
-	if (val == 0)
-	{ /* Special case */
-		*cp++ = '0';
-	} else
-		while (val)
-		{
-			*cp++ = digits[val % radix];
-			val /= radix;
-		}
-	while (cp != temp)
-	{
-		*buf++ = *--cp;
-		length++;
-	}
-	*buf = '\0';
-	return (length);
-}
-
-void
-_dump_buf_with_offset(unsigned char *p, int s, unsigned char *base)
-{
-	int i, c;
-	if ((unsigned int)s > (unsigned int)p)
-	{
-		s = (unsigned int)s - (unsigned int)p;
-	}
-	while (s > 0)
-	{
-		if (base)
-		{
-			_printk("%06X: ", (int)p - (int)base);
-		} else
-		{
-			_printk("%06X: ", p);
-		}
-		for (i = 0;  i < 16;  i++)
-		{
-			if (i < s)
-			{
-				_printk("%02X", p[i] & 0xFF);
-			} else
-			{
-				_printk("  ");
-			}
-			if ((i % 2) == 1) _printk(" ");
-			if ((i % 8) == 7) _printk(" ");
-		}
-		_printk(" |");
-		for (i = 0;  i < 16;  i++)
-		{
-			if (i < s)
-			{
-				c = p[i] & 0xFF;
-				if ((c < 0x20) || (c >= 0x7F)) c = '.';
-			} else
-			{
-				c = ' ';
-			}
-			_printk("%c", c);
-		}
-		_printk("|\n");
-		s -= 16;
-		p += 16;
-	}
-}
-
-void
-_dump_buf(unsigned char *p, int s)
-{
-	_printk("\n");
-	_dump_buf_with_offset(p, s, 0);
-}
-
-/* Very simple inb/outb routines.  We declare ISA_io to be 0 above, and
- * then modify it on platforms which need to.  We do it like this
- * because on some platforms we give inb/outb an exact location, and
- * on others it's an offset from a given location. -- Tom
- */
-
-void ISA_init(unsigned long base)
-{
-	ISA_io = (unsigned char *)base;
-}
-
-void
-outb(int port, unsigned char val)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	ISA_io[port] = val;
-}
-
-unsigned char
-inb(int port)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	return (ISA_io[port]);
-}
-
-/*
- * Local variables:
- *  c-indent-level: 8
- *  c-basic-offset: 8
- *  tab-width: 8
- * End:
- */
diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c
deleted file mode 100644
index fc5b72041948..000000000000
--- a/arch/ppc/boot/common/ns16550.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * COM1 NS16550 support
- */
-
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <asm/serial.h>
-
-#if defined(CONFIG_XILINX_VIRTEX)
-#include <platforms/4xx/xparameters/xparameters.h>
-#endif
-#include "nonstdio.h"
-#include "serial.h"
-
-#define SERIAL_BAUD	9600
-
-extern unsigned long ISA_io;
-
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
-	SERIAL_PORT_DFNS	/* Defined in <asm/serial.h> */
-};
-
-static int shift;
-
-unsigned long serial_init(int chan, void *ignored)
-{
-	unsigned long com_port, base_baud;
-	unsigned char lcr, dlm;
-
-	/* We need to find out which type io we're expecting.  If it's
-	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
-	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
-	switch (rs_table[chan].io_type) {
-		case SERIAL_IO_PORT:
-			com_port = rs_table[chan].port;
-			break;
-		case SERIAL_IO_MEM:
-			com_port = (unsigned long)rs_table[chan].iomem_base;
-			break;
-		default:
-			/* We can't deal with it. */
-			return -1;
-	}
-
-	/* How far apart the registers are. */
-	shift = rs_table[chan].iomem_reg_shift;
-	/* Base baud.. */
-	base_baud = rs_table[chan].baud_base;
-	
-	/* save the LCR */
-	lcr = inb(com_port + (UART_LCR << shift));
-	/* Access baud rate */
-	outb(com_port + (UART_LCR << shift), 0x80);
-	dlm = inb(com_port + (UART_DLM << shift));
-	/*
-	 * Test if serial port is unconfigured.
-	 * We assume that no-one uses less than 110 baud or
-	 * less than 7 bits per character these days.
-	 *  -- paulus.
-	 */
-
-	if ((dlm <= 4) && (lcr & 2))
-		/* port is configured, put the old LCR back */
-		outb(com_port + (UART_LCR << shift), lcr);
-	else {
-		/* Input clock. */
-		outb(com_port + (UART_DLL << shift),
-		     (base_baud / SERIAL_BAUD) & 0xFF);
-		outb(com_port + (UART_DLM << shift),
-		     (base_baud / SERIAL_BAUD) >> 8);
-		/* 8 data, 1 stop, no parity */
-		outb(com_port + (UART_LCR << shift), 0x03);
-		/* RTS/DTR */
-		outb(com_port + (UART_MCR << shift), 0x03);
-	}
-	/* Clear & enable FIFOs */
-	outb(com_port + (UART_FCR << shift), 0x07);
-
-	return (com_port);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
-		;
-	outb(com_port, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
-		;
-	return inb(com_port);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
-}
diff --git a/arch/ppc/boot/common/serial_stub.c b/arch/ppc/boot/common/serial_stub.c
deleted file mode 100644
index 5cc9ae66a8ba..000000000000
--- a/arch/ppc/boot/common/serial_stub.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This is a few stub routines to make the boot code cleaner looking when
- * there is no serial port support doesn't need to be closed, for example.
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * 2003 (c) MontaVista, Software, Inc.  This file is licensed under the terms
- * of the GNU General Public License version 2.  This program is licensed "as
- * is" without any warranty of any kind, whether express or implied.
- */
-
-unsigned long __attribute__ ((weak))
-serial_init(int chan, void *ignored)
-{
-	return 0;
-}
-
-void __attribute__ ((weak))
-serial_close(unsigned long com_port)
-{
-}
diff --git a/arch/ppc/boot/common/string.S b/arch/ppc/boot/common/string.S
deleted file mode 100644
index 8016e43c4771..000000000000
--- a/arch/ppc/boot/common/string.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * String handling functions for PowerPC.
- *
- * Copyright (C) 1996 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#define r0	0
-#define r3	3
-#define r4	4
-#define r5	5
-#define r6	6
-#define r7	7
-#define r8	8
-
-	.globl	strlen
-strlen:
-	addi	r4,r3,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	bne	1b
-	subf	r3,r3,r4
-	blr
-
-	.globl	memset
-memset:
-	rlwimi	r4,r4,8,16,23
-	rlwimi	r4,r4,16,0,15
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	rlwinm	r0,r5,32-2,2,31
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
-
-	.globl	memmove
-memmove:
-	cmplw	0,r3,r4
-	bgt	backwards_memcpy
-	/* fall through */
-
-	.globl	memcpy
-memcpy:
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	addi	r6,r3,-4
-	addi	r4,r4,-4
-	beq	2f			/* if less than 8 bytes to do */
-	andi.	r0,r6,3			/* get dest word aligned */
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,4(r4)
-	lwzu	r8,8(r4)
-	stw	r7,4(r6)
-	stwu	r8,8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,4(r4)
-	addi	r5,r5,-4
-	stwu	r0,4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r4,r4,3
-	addi	r6,r6,3
-4:	lbzu	r0,1(r4)
-	stbu	r0,1(r6)
-	bdnz	4b
-	blr
-5:	subfic	r0,r0,4
-	mtctr	r0
-6:	lbz	r7,4(r4)
-	addi	r4,r4,1
-	stb	r7,4(r6)
-	addi	r6,r6,1
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-	.globl	backwards_memcpy
-backwards_memcpy:
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	add	r6,r3,r5
-	add	r4,r4,r5
-	beq	2f
-	andi.	r0,r6,3
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,-4(r4)
-	lwzu	r8,-8(r4)
-	stw	r7,-4(r6)
-	stwu	r8,-8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,-4(r4)
-	subi	r5,r5,4
-	stwu	r0,-4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-4:	lbzu	r0,-1(r4)
-	stbu	r0,-1(r6)
-	bdnz	4b
-	blr
-5:	mtctr	r0
-6:	lbzu	r7,-1(r4)
-	stbu	r7,-1(r6)
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-	.globl	memcmp
-memcmp:
-	cmpwi	0,r5,0
-	blelr
-	mtctr	r5
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r6)
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	bdnzt	2,1b
-	blr
diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S
deleted file mode 100644
index 0c5e43c4ae06..000000000000
--- a/arch/ppc/boot/common/util.S
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Useful bootup functions, which are more easily done in asm than C.
- *
- * NOTE:  Be very very careful about the registers you use here.
- *	We don't follow any ABI calling convention among the
- *	assembler functions that call each other, especially early
- *	in the initialization.  Please preserve at least r3 and r4
- *	for these early functions, as they often contain information
- *	passed from boot roms into the C decompress function.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-
-	.text
-
-#ifdef CONFIG_6xx
-	.globl	disable_6xx_mmu
-disable_6xx_mmu:
-	/* Establish default MSR value, exception prefix 0xFFF.
-	 * If necessary, this function must fix up the LR if we
-	 * return to a different address space once the MMU is
-	 * disabled.
-	 */
-	li	r8,MSR_IP|MSR_FP
-	mtmsr	r8
-	isync
-
-	/* Test for a 601 */
-	mfpvr	r10
-	srwi	r10,r10,16
-	cmpwi	0,r10,1		/* 601 ? */
-	beq	.clearbats_601
-
-	/* Clear BATs */
-	li	r8,0
-	mtspr	SPRN_DBAT0U,r8
-	mtspr	SPRN_DBAT0L,r8
-	mtspr	SPRN_DBAT1U,r8
-	mtspr	SPRN_DBAT1L,r8
-	mtspr	SPRN_DBAT2U,r8
-	mtspr	SPRN_DBAT2L,r8
-	mtspr	SPRN_DBAT3U,r8
-	mtspr	SPRN_DBAT3L,r8
-.clearbats_601:
-	mtspr	SPRN_IBAT0U,r8
-	mtspr	SPRN_IBAT0L,r8
-	mtspr	SPRN_IBAT1U,r8
-	mtspr	SPRN_IBAT1L,r8
-	mtspr	SPRN_IBAT2U,r8
-	mtspr	SPRN_IBAT2L,r8
-	mtspr	SPRN_IBAT3U,r8
-	mtspr	SPRN_IBAT3L,r8
-	isync
-	sync
-	sync
-
-	/* Set segment registers */
-	li	r8,16		/* load up segment register values */
-	mtctr	r8		/* for context 0 */
-	lis	r8,0x2000	/* Ku = 1, VSID = 0 */
-	li	r10,0
-3:	mtsrin	r8,r10
-	addi	r8,r8,0x111	/* increment VSID */
-	addis	r10,r10,0x1000	/* address of next segment */
-	bdnz	3b
-	blr
-
-	.globl	disable_6xx_l1cache
-disable_6xx_l1cache:
-	/* Enable, invalidate and then disable the L1 icache/dcache. */
-	li	r8,0
-	ori	r8,r8,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
-	mfspr	r11,SPRN_HID0
-	or	r11,r11,r8
-	andc	r10,r11,r8
-	isync
-	mtspr	SPRN_HID0,r8
-	sync
-	isync
-	mtspr	SPRN_HID0,r10
-	sync
-	isync
-	blr
-#endif
-
-	.globl	_setup_L2CR
-_setup_L2CR:
-/*
- * We should be skipping this section on CPUs where this results in an
- * illegal instruction.  If not, please send trini@kernel.crashing.org
- * the PVR of your CPU.
- */
-	/* Invalidate/disable L2 cache */
-	sync
-	isync
-	mfspr	r8,SPRN_L2CR
-	rlwinm	r8,r8,0,1,31
-	oris	r8,r8,L2CR_L2I@h
-	sync
-	isync
-	mtspr	SPRN_L2CR,r8
-	sync
-	isync
-
-	/* Wait for the invalidation to complete */
-	mfspr   r8,SPRN_PVR
-	srwi    r8,r8,16
-	cmplwi	cr0,r8,0x8000			/* 7450 */
-	cmplwi	cr1,r8,0x8001			/* 7455 */
-	cmplwi	cr2,r8,0x8002			/* 7457 */
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq	/* Now test if any are true. */
-	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq
-	bne     2f
-
-1:	mfspr	r8,SPRN_L2CR	/* On 745x, poll L2I bit (bit 10) */
-	rlwinm.	r9,r8,0,10,10
-	bne	1b
-	b	3f
-
-2:      mfspr   r8,SPRN_L2CR	/* On 75x & 74[01]0, poll L2IP bit (bit 31) */
-	rlwinm. r9,r8,0,31,31
-	bne     2b
-
-3:	rlwinm	r8,r8,0,11,9	/* Turn off L2I bit */
-	sync
-	isync
-	mtspr	SPRN_L2CR,r8
-	sync
-	isync
-	blr
-
-	.globl	_setup_L3CR
-_setup_L3CR:
-	/* Invalidate/disable L3 cache */
-	sync
-	isync
-	mfspr	r8,SPRN_L3CR
-	rlwinm	r8,r8,0,1,31
-	ori	r8,r8,L3CR_L3I@l
-	sync
-	isync
-	mtspr	SPRN_L3CR,r8
-	sync
-	isync
-
-	/* Wait for the invalidation to complete */
-1:	mfspr	r8,SPRN_L3CR
-	rlwinm.	r9,r8,0,21,21
-	bne	1b
-
-	rlwinm	r8,r8,0,22,20		/* Turn off L3I bit */
-	sync
-	isync
-	mtspr	SPRN_L3CR,r8
-	sync
-	isync
-	blr
-
-
-/* udelay (on non-601 processors) needs to know the period of the
- * timebase in nanoseconds.  This used to be hardcoded to be 60ns
- * (period of 66MHz/4).  Now a variable is used that is initialized to
- * 60 for backward compatibility, but it can be overridden as necessary
- * with code something like this:
- *    extern unsigned long timebase_period_ns;
- *    timebase_period_ns = 1000000000 / bd->bi_tbfreq;
- */
-	.data
-	.globl timebase_period_ns
-timebase_period_ns:
-	.long	60
-
-	.text
-/*
- * Delay for a number of microseconds
- */
-	.globl	udelay
-udelay:
-	mfspr	r4,SPRN_PVR
-	srwi	r4,r4,16
-	cmpwi	0,r4,1		/* 601 ? */
-	bne	.udelay_not_601
-00:	li	r0,86	/* Instructions / microsecond? */
-	mtctr	r0
-10:	addi	r0,r0,0 /* NOP */
-	bdnz	10b
-	subic.	r3,r3,1
-	bne	00b
-	blr
-
-.udelay_not_601:
-	mulli	r4,r3,1000	/* nanoseconds */
-	/*  Change r4 to be the number of ticks using:	
-	 *	(nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
-	 *  timebase_period_ns defaults to 60 (16.6MHz) */
-	lis	r5,timebase_period_ns@ha
-	lwz	r5,timebase_period_ns@l(r5)
-	add	r4,r4,r5
-	addi	r4,r4,-1
-	divw	r4,r4,r5	/* BUS ticks */
-1:	mftbu	r5
-	mftb	r6
-	mftbu	r7
-	cmpw	0,r5,r7
-	bne	1b		/* Get [synced] base time */
-	addc	r9,r6,r4	/* Compute end time */
-	addze	r8,r5
-2:	mftbu	r5
-	cmpw	0,r5,r8
-	blt	2b
-	bgt	3f
-	mftb	r6
-	cmpw	0,r6,r9
-	blt	2b
-3:	blr
-
-	.section ".relocate_code","xa"
-/*
- * Flush and enable instruction cache
- * First, flush the data cache in case it was enabled and may be
- * holding instructions for copy back.
- */
-        .globl flush_instruction_cache
-flush_instruction_cache:        
-	mflr	r6
-	bl	flush_data_cache
-
-#ifdef CONFIG_8xx
-	lis	r3, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r3
-	lis	r3, IDC_ENABLE@h
-	mtspr	SPRN_IC_CST, r3
-	lis	r3, IDC_DISABLE@h
-	mtspr	SPRN_DC_CST, r3
-#elif CONFIG_4xx
-	lis	r3,start@h		# r9 = &_start
-	lis	r4,_etext@ha
-	addi	r4,r4,_etext@l		# r8 = &_etext
-1:	dcbf	r0,r3			# Flush the data cache
-	icbi	r0,r3			# Invalidate the instruction cache
-	addi	r3,r3,0x10		# Increment by one cache line
-	cmplw	cr0,r3,r4		# Are we at the end yet?
-	blt	1b			# No, keep flushing and invalidating
-#else
-	/* Enable, invalidate and then disable the L1 icache/dcache. */
-	li	r3,0
-	ori	r3,r3,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
-	mfspr	r4,SPRN_HID0
-	or	r5,r4,r3
-	isync
-	mtspr	SPRN_HID0,r5
-	sync
-	isync
-	ori	r5,r4,HID0_ICE	/* Enable cache */
-	mtspr	SPRN_HID0,r5
-	sync
-	isync
-#endif
-	mtlr	r6
-	blr
-
-#define NUM_CACHE_LINES 128*8
-#define cache_flush_buffer 0x1000
-
-/*
- * Flush data cache
- * Do this by just reading lots of stuff into the cache.
- */
-        .globl flush_data_cache
-flush_data_cache:       
-	lis	r3,cache_flush_buffer@h
-	ori	r3,r3,cache_flush_buffer@l
-	li	r4,NUM_CACHE_LINES
-	mtctr	r4
-00:	lwz	r4,0(r3)
-	addi	r3,r3,L1_CACHE_BYTES	/* Next line, please */
-	bdnz	00b
-10:	blr
-
-	.previous
-
diff --git a/arch/ppc/boot/images/.gitignore b/arch/ppc/boot/images/.gitignore
deleted file mode 100644
index 21c2dc5b6b78..000000000000
--- a/arch/ppc/boot/images/.gitignore
+++ /dev/null
@@ -1,6 +0,0 @@
-sImage
-vmapus
-vmlinux*
-miboot*
-zImage*
-uImage
diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile
deleted file mode 100644
index 58415d5718e3..000000000000
--- a/arch/ppc/boot/images/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# This dir holds all of the images for PPC machines.
-# Tom Rini	January 2001
-
-MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
-
-extra-y		:= vmlinux.bin vmlinux.gz
-
-# two make processes may write to vmlinux.gz at the same time with make -j
-quiet_cmd_mygzip = GZIP    $@
-cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@
-
-
-OBJCOPYFLAGS_vmlinux.bin := -O binary
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,mygzip)
-
-quiet_cmd_uimage = UIMAGE  $@
-      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \
-               -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
-               -d $< $@
-
-targets += uImage
-$(obj)/uImage: $(obj)/vmlinux.gz
-	$(Q)rm -f $@
-	$(call cmd,uimage)
-	@echo -n '  Image: $@ '
-	@if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
-
-# Files generated that shall be removed upon make clean
-clean-files	:= sImage vmapus vmlinux* miboot* zImage* uImage
diff --git a/arch/ppc/boot/include/cpc700.h b/arch/ppc/boot/include/cpc700.h
deleted file mode 100644
index 28cfcde44909..000000000000
--- a/arch/ppc/boot/include/cpc700.h
+++ /dev/null
@@ -1,26 +0,0 @@
-
-#ifndef __PPC_BOOT_CPC700_H
-#define __PPC_BOOT_CPC700_H
-
-#define CPC700_MEM_CFGADDR    0xff500008
-#define CPC700_MEM_CFGDATA    0xff50000c
-
-#define CPC700_MB0SA            0x38
-#define CPC700_MB0EA            0x58
-#define CPC700_MB1SA            0x3c
-#define CPC700_MB1EA            0x5c
-#define CPC700_MB2SA            0x40
-#define CPC700_MB2EA            0x60
-#define CPC700_MB3SA            0x44
-#define CPC700_MB3EA            0x64
-#define CPC700_MB4SA            0x48
-#define CPC700_MB4EA            0x68
-
-static inline long
-cpc700_read_memreg(int reg)
-{
-	out_be32((volatile unsigned int *) CPC700_MEM_CFGADDR, reg);
-	return in_be32((volatile unsigned int *) CPC700_MEM_CFGDATA);
-}
-
-#endif
diff --git a/arch/ppc/boot/include/iso_font.h b/arch/ppc/boot/include/iso_font.h
deleted file mode 100644
index bff050e002b7..000000000000
--- a/arch/ppc/boot/include/iso_font.h
+++ /dev/null
@@ -1,257 +0,0 @@
-static const unsigned char font[] = {
-/* 0x00 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x01 */ 0x00,0x00,0x7E,0x81,0xA5,0x81,0x81,0xBD,0x99,0x81,0x81,0x7E,0x00,0x00,0x00,0x00,
-/* 0x02 */ 0x00,0x00,0x7E,0xFF,0xDB,0xFF,0xFF,0xC3,0xC3,0xE7,0xFF,0x7E,0x00,0x00,0x00,0x00,
-/* 0x03 */ 0x00,0x00,0x00,0x00,0x6C,0xFE,0xFE,0xFE,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00,
-/* 0x04 */ 0x00,0x00,0x00,0x00,0x10,0x38,0x7C,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00,0x00,
-/* 0x05 */ 0x00,0x00,0x00,0x18,0x3C,0x3C,0xE7,0xE7,0xE7,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x06 */ 0x00,0x00,0x00,0x18,0x3C,0x7E,0xFF,0xFF,0x7E,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x07 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x08 */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xC3,0xC3,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0x09 */ 0x00,0x00,0x00,0x00,0x00,0x3C,0x66,0x42,0x42,0x66,0x3C,0x00,0x00,0x00,0x00,0x00,
-/* 0x0A */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xC3,0x99,0xBD,0xBD,0x99,0xC3,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0x0B */ 0x00,0x00,0x3E,0x0E,0x1A,0x32,0x78,0xCC,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00,
-/* 0x0C */ 0x00,0x00,0x3C,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x0D */ 0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x30,0x30,0x70,0xF0,0xE0,0x00,0x00,0x00,0x00,
-/* 0x0E */ 0x00,0x00,0x7F,0x63,0x7F,0x63,0x63,0x63,0x63,0x67,0xE7,0xE6,0xC0,0x00,0x00,0x00,
-/* 0x0F */ 0x00,0x00,0x00,0x18,0x18,0xDB,0x3C,0xE7,0x3C,0xDB,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x10 */ 0x00,0x80,0xC0,0xE0,0xF0,0xF8,0xFE,0xF8,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,
-/* 0x11 */ 0x00,0x02,0x06,0x0E,0x1E,0x3E,0xFE,0x3E,0x1E,0x0E,0x06,0x02,0x00,0x00,0x00,0x00,
-/* 0x12 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00,0x00,
-/* 0x13 */ 0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x66,0x66,0x00,0x00,0x00,0x00,
-/* 0x14 */ 0x00,0x00,0x7F,0xDB,0xDB,0xDB,0x7B,0x1B,0x1B,0x1B,0x1B,0x1B,0x00,0x00,0x00,0x00,
-/* 0x15 */ 0x00,0x7C,0xC6,0x60,0x38,0x6C,0xC6,0xC6,0x6C,0x38,0x0C,0xC6,0x7C,0x00,0x00,0x00,
-/* 0x16 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,
-/* 0x17 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x7E,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00,
-/* 0x18 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x19 */ 0x00,0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00,
-/* 0x1A */ 0x00,0x00,0x00,0x00,0x00,0x18,0x0C,0xFE,0x0C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1B */ 0x00,0x00,0x00,0x00,0x00,0x30,0x60,0xFE,0x60,0x30,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1C */ 0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1D */ 0x00,0x00,0x00,0x00,0x00,0x28,0x6C,0xFE,0x6C,0x28,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1E */ 0x00,0x00,0x00,0x00,0x10,0x38,0x38,0x7C,0x7C,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,
-/* 0x1F */ 0x00,0x00,0x00,0x00,0xFE,0xFE,0x7C,0x7C,0x38,0x38,0x10,0x00,0x00,0x00,0x00,0x00,
-/* 0x20 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x21 */ 0x00,0x00,0x18,0x3C,0x3C,0x3C,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x22 */ 0x00,0x66,0x66,0x66,0x24,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x23 */ 0x00,0x00,0x00,0x6C,0x6C,0xFE,0x6C,0x6C,0x6C,0xFE,0x6C,0x6C,0x00,0x00,0x00,0x00,
-/* 0x24 */ 0x18,0x18,0x7C,0xC6,0xC2,0xC0,0x7C,0x06,0x06,0x86,0xC6,0x7C,0x18,0x18,0x00,0x00,
-/* 0x25 */ 0x00,0x00,0x00,0x00,0xC2,0xC6,0x0C,0x18,0x30,0x60,0xC6,0x86,0x00,0x00,0x00,0x00,
-/* 0x26 */ 0x00,0x00,0x38,0x6C,0x6C,0x38,0x76,0xDC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x27 */ 0x00,0x30,0x30,0x30,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x28 */ 0x00,0x00,0x0C,0x18,0x30,0x30,0x30,0x30,0x30,0x30,0x18,0x0C,0x00,0x00,0x00,0x00,
-/* 0x29 */ 0x00,0x00,0x30,0x18,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x18,0x30,0x00,0x00,0x00,0x00,
-/* 0x2A */ 0x00,0x00,0x00,0x00,0x00,0x66,0x3C,0xFF,0x3C,0x66,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x2B */ 0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x2C */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x18,0x30,0x00,0x00,0x00,
-/* 0x2D */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x2E */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x2F */ 0x00,0x00,0x00,0x00,0x02,0x06,0x0C,0x18,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x00,
-/* 0x30 */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xD6,0xD6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00,
-/* 0x31 */ 0x00,0x00,0x18,0x38,0x78,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x00,0x00,0x00,0x00,
-/* 0x32 */ 0x00,0x00,0x7C,0xC6,0x06,0x0C,0x18,0x30,0x60,0xC0,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0x33 */ 0x00,0x00,0x7C,0xC6,0x06,0x06,0x3C,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x34 */ 0x00,0x00,0x0C,0x1C,0x3C,0x6C,0xCC,0xFE,0x0C,0x0C,0x0C,0x1E,0x00,0x00,0x00,0x00,
-/* 0x35 */ 0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xFC,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x36 */ 0x00,0x00,0x38,0x60,0xC0,0xC0,0xFC,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x37 */ 0x00,0x00,0xFE,0xC6,0x06,0x06,0x0C,0x18,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,
-/* 0x38 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0x7C,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x39 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0x7E,0x06,0x06,0x06,0x0C,0x78,0x00,0x00,0x00,0x00,
-/* 0x3A */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,
-/* 0x3B */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x30,0x00,0x00,0x00,0x00,
-/* 0x3C */ 0x00,0x00,0x00,0x06,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x06,0x00,0x00,0x00,0x00,
-/* 0x3D */ 0x00,0x00,0x00,0x00,0x00,0x7E,0x00,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x3E */ 0x00,0x00,0x00,0x60,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x60,0x00,0x00,0x00,0x00,
-/* 0x3F */ 0x00,0x00,0x7C,0xC6,0xC6,0x0C,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x40 */ 0x00,0x00,0x00,0x7C,0xC6,0xC6,0xDE,0xDE,0xDE,0xDC,0xC0,0x7C,0x00,0x00,0x00,0x00,
-/* 0x41 */ 0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x42 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x66,0x66,0x66,0x66,0xFC,0x00,0x00,0x00,0x00,
-/* 0x43 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x00,0x00,0x00,0x00,
-/* 0x44 */ 0x00,0x00,0xF8,0x6C,0x66,0x66,0x66,0x66,0x66,0x66,0x6C,0xF8,0x00,0x00,0x00,0x00,
-/* 0x45 */ 0x00,0x00,0xFE,0x66,0x62,0x68,0x78,0x68,0x60,0x62,0x66,0xFE,0x00,0x00,0x00,0x00,
-/* 0x46 */ 0x00,0x00,0xFE,0x66,0x62,0x68,0x78,0x68,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x47 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xDE,0xC6,0xC6,0x66,0x3A,0x00,0x00,0x00,0x00,
-/* 0x48 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x49 */ 0x00,0x00,0x3C,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x4A */ 0x00,0x00,0x1E,0x0C,0x0C,0x0C,0x0C,0x0C,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00,
-/* 0x4B */ 0x00,0x00,0xE6,0x66,0x66,0x6C,0x78,0x78,0x6C,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x4C */ 0x00,0x00,0xF0,0x60,0x60,0x60,0x60,0x60,0x60,0x62,0x66,0xFE,0x00,0x00,0x00,0x00,
-/* 0x4D */ 0x00,0x00,0xC6,0xEE,0xFE,0xFE,0xD6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x4E */ 0x00,0x00,0xC6,0xE6,0xF6,0xFE,0xDE,0xCE,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x4F */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x50 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x51 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xD6,0xDE,0x7C,0x0C,0x0E,0x00,0x00,
-/* 0x52 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x6C,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x53 */ 0x00,0x00,0x7C,0xC6,0xC6,0x60,0x38,0x0C,0x06,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x54 */ 0x00,0x00,0x7E,0x7E,0x5A,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x55 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x56 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x6C,0x38,0x10,0x00,0x00,0x00,0x00,
-/* 0x57 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0xEE,0x6C,0x00,0x00,0x00,0x00,
-/* 0x58 */ 0x00,0x00,0xC6,0xC6,0x6C,0x7C,0x38,0x38,0x7C,0x6C,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x59 */ 0x00,0x00,0x66,0x66,0x66,0x66,0x3C,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x5A */ 0x00,0x00,0xFE,0xC6,0x86,0x0C,0x18,0x30,0x60,0xC2,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0x5B */ 0x00,0x00,0x3C,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x3C,0x00,0x00,0x00,0x00,
-/* 0x5C */ 0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x06,0x02,0x00,0x00,0x00,0x00,
-/* 0x5D */ 0x00,0x00,0x3C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x3C,0x00,0x00,0x00,0x00,
-/* 0x5E */ 0x10,0x38,0x6C,0xC6,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x5F */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,
-/* 0x60 */ 0x30,0x30,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x61 */ 0x00,0x00,0x00,0x00,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x62 */ 0x00,0x00,0xE0,0x60,0x60,0x78,0x6C,0x66,0x66,0x66,0x66,0x7C,0x00,0x00,0x00,0x00,
-/* 0x63 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC0,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x64 */ 0x00,0x00,0x1C,0x0C,0x0C,0x3C,0x6C,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x65 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xFE,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x66 */ 0x00,0x00,0x38,0x6C,0x64,0x60,0xF0,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x67 */ 0x00,0x00,0x00,0x00,0x00,0x3E,0x66,0x66,0x66,0x66,0x66,0x3E,0x06,0x66,0x3C,0x00,
-/* 0x68 */ 0x00,0x00,0xE0,0x60,0x60,0x6C,0x76,0x66,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x69 */ 0x00,0x00,0x18,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x6A */ 0x00,0x00,0x06,0x06,0x00,0x0E,0x06,0x06,0x06,0x06,0x06,0x06,0x66,0x66,0x3C,0x00,
-/* 0x6B */ 0x00,0x00,0xE0,0x60,0x60,0x66,0x6C,0x78,0x78,0x6C,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x6C */ 0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x6D */ 0x00,0x00,0x00,0x00,0x00,0x6C,0xFE,0xD6,0xD6,0xD6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x6E */ 0x00,0x00,0x00,0x00,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
-/* 0x6F */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x70 */ 0x00,0x00,0x00,0x00,0x00,0xFC,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0x60,0xF0,0x00,
-/* 0x71 */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xCC,0xCC,0xCC,0xCC,0xCC,0x7C,0x0C,0x0C,0x1E,0x00,
-/* 0x72 */ 0x00,0x00,0x00,0x00,0x00,0xDC,0x76,0x66,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x73 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0x60,0x38,0x0C,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x74 */ 0x00,0x00,0x10,0x30,0x30,0xFC,0x30,0x30,0x30,0x30,0x36,0x1C,0x00,0x00,0x00,0x00,
-/* 0x75 */ 0x00,0x00,0x00,0x00,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x76 */ 0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x3C,0x18,0x00,0x00,0x00,0x00,
-/* 0x77 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0x6C,0x00,0x00,0x00,0x00,
-/* 0x78 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0x6C,0x38,0x38,0x38,0x6C,0xC6,0x00,0x00,0x00,0x00,
-/* 0x79 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x0C,0xF8,0x00,
-/* 0x7A */ 0x00,0x00,0x00,0x00,0x00,0xFE,0xCC,0x18,0x30,0x60,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0x7B */ 0x00,0x00,0x0E,0x18,0x18,0x18,0x70,0x18,0x18,0x18,0x18,0x0E,0x00,0x00,0x00,0x00,
-/* 0x7C */ 0x00,0x00,0x18,0x18,0x18,0x18,0x00,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x7D */ 0x00,0x00,0x70,0x18,0x18,0x18,0x0E,0x18,0x18,0x18,0x18,0x70,0x00,0x00,0x00,0x00,
-/* 0x7E */ 0x00,0x00,0x76,0xDC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x7F */ 0x00,0x00,0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xC6,0xFE,0x00,0x00,0x00,0x00,0x00,
-/* 0x80 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x0C,0x06,0x7C,0x00,0x00,
-/* 0x81 */ 0x00,0x00,0xCC,0x00,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x82 */ 0x00,0x0C,0x18,0x30,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x83 */ 0x00,0x10,0x38,0x6C,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x84 */ 0x00,0x00,0xCC,0x00,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x85 */ 0x00,0x60,0x30,0x18,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x86 */ 0x00,0x38,0x6C,0x38,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x87 */ 0x00,0x00,0x00,0x00,0x3C,0x66,0x60,0x60,0x66,0x3C,0x0C,0x06,0x3C,0x00,0x00,0x00,
-/* 0x88 */ 0x00,0x10,0x38,0x6C,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x89 */ 0x00,0x00,0xC6,0x00,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x8A */ 0x00,0x60,0x30,0x18,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x8B */ 0x00,0x00,0x66,0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x8C */ 0x00,0x18,0x3C,0x66,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x8D */ 0x00,0x60,0x30,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x8E */ 0x00,0xC6,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x8F */ 0x38,0x6C,0x38,0x00,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x90 */ 0x18,0x30,0x60,0x00,0xFE,0x66,0x60,0x7C,0x60,0x60,0x66,0xFE,0x00,0x00,0x00,0x00,
-/* 0x91 */ 0x00,0x00,0x00,0x00,0x00,0xCC,0x76,0x36,0x7E,0xD8,0xD8,0x6E,0x00,0x00,0x00,0x00,
-/* 0x92 */ 0x00,0x00,0x3E,0x6C,0xCC,0xCC,0xFE,0xCC,0xCC,0xCC,0xCC,0xCE,0x00,0x00,0x00,0x00,
-/* 0x93 */ 0x00,0x10,0x38,0x6C,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x94 */ 0x00,0x00,0xC6,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x95 */ 0x00,0x60,0x30,0x18,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x96 */ 0x00,0x30,0x78,0xCC,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x97 */ 0x00,0x60,0x30,0x18,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x98 */ 0x00,0x00,0xC6,0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x0C,0x78,0x00,
-/* 0x99 */ 0x00,0xC6,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x9A */ 0x00,0xC6,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x9B */ 0x00,0x18,0x18,0x3C,0x66,0x60,0x60,0x60,0x66,0x3C,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x9C */ 0x00,0x38,0x6C,0x64,0x60,0xF8,0x60,0x60,0x60,0x60,0xE6,0xFC,0x00,0x00,0x00,0x00,
-/* 0x9D */ 0x00,0x00,0x66,0x66,0x3C,0x18,0x7E,0x18,0x7E,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x9E */ 0x00,0xF8,0xCC,0xCC,0xF8,0xC4,0xCC,0xDE,0xCC,0xCC,0xCC,0xC6,0x00,0x00,0x00,0x00,
-/* 0x9F */ 0x00,0x0E,0x1B,0x18,0x18,0x18,0x7E,0x18,0x18,0x18,0x18,0x18,0xD8,0x70,0x00,0x00,
-/* 0xA0 */ 0x00,0x18,0x30,0x60,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0xA1 */ 0x00,0x0C,0x18,0x30,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0xA2 */ 0x00,0x18,0x30,0x60,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0xA3 */ 0x00,0x18,0x30,0x60,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0xA4 */ 0x00,0x00,0x76,0xDC,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
-/* 0xA5 */ 0x76,0xDC,0x00,0xC6,0xE6,0xF6,0xFE,0xDE,0xCE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0xA6 */ 0x00,0x3C,0x6C,0x6C,0x3E,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xA7 */ 0x00,0x38,0x6C,0x6C,0x38,0x00,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xA8 */ 0x00,0x00,0x30,0x30,0x00,0x30,0x30,0x60,0xC0,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0xA9 */ 0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,
-/* 0xAA */ 0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0x06,0x06,0x06,0x00,0x00,0x00,0x00,0x00,
-/* 0xAB */ 0x00,0xC0,0xC0,0xC2,0xC6,0xCC,0x18,0x30,0x60,0xDC,0x86,0x0C,0x18,0x3E,0x00,0x00,
-/* 0xAC */ 0x00,0xC0,0xC0,0xC2,0xC6,0xCC,0x18,0x30,0x66,0xCE,0x9E,0x3E,0x06,0x06,0x00,0x00,
-/* 0xAD */ 0x00,0x00,0x18,0x18,0x00,0x18,0x18,0x18,0x3C,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00,
-/* 0xAE */ 0x00,0x00,0x00,0x00,0x00,0x36,0x6C,0xD8,0x6C,0x36,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xAF */ 0x00,0x00,0x00,0x00,0x00,0xD8,0x6C,0x36,0x6C,0xD8,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xB0 */ 0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,
-/* 0xB1 */ 0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,
-/* 0xB2 */ 0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,
-/* 0xB3 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB4 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB5 */ 0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB6 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xB7 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xB8 */ 0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB9 */ 0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xBA */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xBB */ 0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xBC */ 0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xBD */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xBE */ 0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xBF */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC0 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC1 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC2 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC3 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC4 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC5 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC6 */ 0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC7 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xC8 */ 0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC9 */ 0x00,0x00,0x00,0x00,0x00,0x3F,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCA */ 0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xCB */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCC */ 0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCD */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xCE */ 0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCF */ 0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD0 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD1 */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xD2 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xD3 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD4 */ 0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD5 */ 0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xD6 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xD7 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xD8 */ 0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xD9 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xDA */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xDB */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0xDC */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0xDD */ 0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,
-/* 0xDE */ 0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,
-/* 0xDF */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xE0 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0xD8,0xD8,0xD8,0xDC,0x76,0x00,0x00,0x00,0x00,
-/* 0xE1 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xFC,0xC6,0xC6,0xC6,0xC6,0xDC,0xC0,0xC0,0x00,0x00,
-/* 0xE2 */ 0x00,0x00,0xFE,0xC6,0xC6,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,
-/* 0xE3 */ 0x00,0x00,0x00,0x00,0x00,0xFE,0x6C,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,
-/* 0xE4 */ 0x00,0x00,0xFE,0xC6,0x60,0x30,0x18,0x18,0x30,0x60,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0xE5 */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xD8,0xD8,0xD8,0xD8,0xD8,0x70,0x00,0x00,0x00,0x00,
-/* 0xE6 */ 0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0xC0,0x00,0x00,0x00,
-/* 0xE7 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0xE8 */ 0x00,0x00,0x7E,0x18,0x3C,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00,
-/* 0xE9 */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00,
-/* 0xEA */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xC6,0x6C,0x6C,0x6C,0x6C,0xEE,0x00,0x00,0x00,0x00,
-/* 0xEB */ 0x00,0x00,0x1E,0x30,0x18,0x0C,0x3E,0x66,0x66,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
-/* 0xEC */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xDB,0xDB,0xDB,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xED */ 0x00,0x00,0x00,0x03,0x06,0x7E,0xDB,0xDB,0xF3,0x7E,0x60,0xC0,0x00,0x00,0x00,0x00,
-/* 0xEE */ 0x00,0x00,0x1C,0x30,0x60,0x60,0x7C,0x60,0x60,0x60,0x30,0x1C,0x00,0x00,0x00,0x00,
-/* 0xEF */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0xF0 */ 0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,
-/* 0xF1 */ 0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
-/* 0xF2 */ 0x00,0x00,0x00,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x00,0x7E,0x00,0x00,0x00,0x00,
-/* 0xF3 */ 0x00,0x00,0x00,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x00,0x7E,0x00,0x00,0x00,0x00,
-/* 0xF4 */ 0x00,0x0E,0x1B,0x1B,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xF5 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xD8,0xD8,0xD8,0x70,0x00,0x00,0x00,0x00,
-/* 0xF6 */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x7E,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,
-/* 0xF7 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0x00,0x76,0xDC,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xF8 */ 0x00,0x38,0x6C,0x6C,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xF9 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFA */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFB */ 0x00,0x0F,0x0C,0x0C,0x0C,0x0C,0x0C,0xEC,0x6C,0x6C,0x3C,0x1C,0x00,0x00,0x00,0x00,
-/* 0xFC */ 0x00,0xD8,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFD */ 0x00,0x70,0xD8,0x30,0x60,0xC8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFE */ 0x00,0x00,0x00,0x00,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x00,0x00,0x00,0x00,0x00,
-};
diff --git a/arch/ppc/boot/include/mpc10x.h b/arch/ppc/boot/include/mpc10x.h
deleted file mode 100644
index 6e5d540d8d3e..000000000000
--- a/arch/ppc/boot/include/mpc10x.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Common defines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
- * ctrl/EPIC/etc.
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * This is a heavily stripped down version of:
- * include/asm-ppc/mpc10x.h
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __BOOT_MPC10X_H__
-#define __BOOT_MPC10X_H__
-
-/*
- * The values here don't completely map everything but should work in most
- * cases.
- *
- * MAP A (PReP Map)
- *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
- *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
- *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- *
- * MAP B (CHRP Map)
- *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
- *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
- *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- */
-
-/* Define the type of map to use */
-#define	MPC10X_MEM_MAP_A		1
-#define	MPC10X_MEM_MAP_B		2
-
-/* Map A (PReP Map) Defines */
-#define	MPC10X_MAPA_CNFG_ADDR		0x80000cf8
-#define	MPC10X_MAPA_CNFG_DATA		0x80000cfc
-
-/* Map B (CHRP Map) Defines */
-#define	MPC10X_MAPB_CNFG_ADDR		0xfec00000
-#define	MPC10X_MAPB_CNFG_DATA		0xfee00000
-
-/* Define offsets for the memory controller registers in the config space */
-#define MPC10X_MCTLR_MEM_START_1	0x80	/* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_START_2	0x84	/* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_START_1	0x88	/* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_START_2	0x8c	/* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_END_1		0x90	/* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_END_2		0x94	/* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_END_1	0x98	/* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_END_2	0x9c	/* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_BANK_ENABLES	0xa0
-
-#endif	/* __BOOT_MPC10X_H__ */
diff --git a/arch/ppc/boot/include/mpsc_defs.h b/arch/ppc/boot/include/mpsc_defs.h
deleted file mode 100644
index 9f37e1355b17..000000000000
--- a/arch/ppc/boot/include/mpsc_defs.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * arch/ppc/boot/include/mpsc_defs.h
- *
- * Register definitions for the Marvell Multi-Protocol Serial Controller (MPSC),
- * Serial DMA Controller (SDMA), and Baud Rate Generator (BRG).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef	_PPC_BOOT_MPSC_DEFS_H__
-#define	_PPC_BOOT_MPSC_DEFS_H__
-
-#define	MPSC_NUM_CTLRS		2
-
-/*
- *****************************************************************************
- *
- *	Multi-Protocol Serial Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* Main Configuratino Register Offsets */
-#define	MPSC_MMCRL			0x0000
-#define	MPSC_MMCRH			0x0004
-#define	MPSC_MPCR			0x0008
-#define	MPSC_CHR_1			0x000c
-#define	MPSC_CHR_2			0x0010
-#define	MPSC_CHR_3			0x0014
-#define	MPSC_CHR_4			0x0018
-#define	MPSC_CHR_5			0x001c
-#define	MPSC_CHR_6			0x0020
-#define	MPSC_CHR_7			0x0024
-#define	MPSC_CHR_8			0x0028
-#define	MPSC_CHR_9			0x002c
-#define	MPSC_CHR_10			0x0030
-#define	MPSC_CHR_11			0x0034
-
-#define	MPSC_MPCR_CL_5			0
-#define	MPSC_MPCR_CL_6			1
-#define	MPSC_MPCR_CL_7			2
-#define	MPSC_MPCR_CL_8			3
-#define	MPSC_MPCR_SBL_1			0
-#define	MPSC_MPCR_SBL_2			3
-
-#define	MPSC_CHR_2_TEV			(1<<1)
-#define	MPSC_CHR_2_TA			(1<<7)
-#define	MPSC_CHR_2_TTCS			(1<<9)
-#define	MPSC_CHR_2_REV			(1<<17)
-#define	MPSC_CHR_2_RA			(1<<23)
-#define	MPSC_CHR_2_CRD			(1<<25)
-#define	MPSC_CHR_2_EH			(1<<31)
-#define	MPSC_CHR_2_PAR_ODD		0
-#define	MPSC_CHR_2_PAR_SPACE		1
-#define	MPSC_CHR_2_PAR_EVEN		2
-#define	MPSC_CHR_2_PAR_MARK		3
-
-/* MPSC Signal Routing */
-#define	MPSC_MRR			0x0000
-#define	MPSC_RCRR			0x0004
-#define	MPSC_TCRR			0x0008
-
-/*
- *****************************************************************************
- *
- *	Serial DMA Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define	SDMA_SDC			0x0000
-#define	SDMA_SDCM			0x0008
-#define	SDMA_RX_DESC			0x0800
-#define	SDMA_RX_BUF_PTR			0x0808
-#define	SDMA_SCRDP			0x0810
-#define	SDMA_TX_DESC			0x0c00
-#define	SDMA_SCTDP			0x0c10
-#define	SDMA_SFTDP			0x0c14
-
-#define	SDMA_DESC_CMDSTAT_PE		(1<<0)
-#define	SDMA_DESC_CMDSTAT_CDL		(1<<1)
-#define	SDMA_DESC_CMDSTAT_FR		(1<<3)
-#define	SDMA_DESC_CMDSTAT_OR		(1<<6)
-#define	SDMA_DESC_CMDSTAT_BR		(1<<9)
-#define	SDMA_DESC_CMDSTAT_MI		(1<<10)
-#define	SDMA_DESC_CMDSTAT_A		(1<<11)
-#define	SDMA_DESC_CMDSTAT_AM		(1<<12)
-#define	SDMA_DESC_CMDSTAT_CT		(1<<13)
-#define	SDMA_DESC_CMDSTAT_C		(1<<14)
-#define	SDMA_DESC_CMDSTAT_ES		(1<<15)
-#define	SDMA_DESC_CMDSTAT_L		(1<<16)
-#define	SDMA_DESC_CMDSTAT_F		(1<<17)
-#define	SDMA_DESC_CMDSTAT_P		(1<<18)
-#define	SDMA_DESC_CMDSTAT_EI		(1<<23)
-#define	SDMA_DESC_CMDSTAT_O		(1<<31)
-
-#define SDMA_DESC_DFLT			(SDMA_DESC_CMDSTAT_O |	\
-					SDMA_DESC_CMDSTAT_EI)
-
-#define	SDMA_SDC_RFT			(1<<0)
-#define	SDMA_SDC_SFM			(1<<1)
-#define	SDMA_SDC_BLMR			(1<<6)
-#define	SDMA_SDC_BLMT			(1<<7)
-#define	SDMA_SDC_POVR			(1<<8)
-#define	SDMA_SDC_RIFB			(1<<9)
-
-#define	SDMA_SDCM_ERD			(1<<7)
-#define	SDMA_SDCM_AR			(1<<15)
-#define	SDMA_SDCM_STD			(1<<16)
-#define	SDMA_SDCM_TXD			(1<<23)
-#define	SDMA_SDCM_AT			(1<<31)
-
-#define	SDMA_0_CAUSE_RXBUF		(1<<0)
-#define	SDMA_0_CAUSE_RXERR		(1<<1)
-#define	SDMA_0_CAUSE_TXBUF		(1<<2)
-#define	SDMA_0_CAUSE_TXEND		(1<<3)
-#define	SDMA_1_CAUSE_RXBUF		(1<<8)
-#define	SDMA_1_CAUSE_RXERR		(1<<9)
-#define	SDMA_1_CAUSE_TXBUF		(1<<10)
-#define	SDMA_1_CAUSE_TXEND		(1<<11)
-
-#define	SDMA_CAUSE_RX_MASK	(SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \
-	SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR)
-#define	SDMA_CAUSE_TX_MASK	(SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \
-	SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND)
-
-/* SDMA Interrupt registers */
-#define	SDMA_INTR_CAUSE			0x0000
-#define	SDMA_INTR_MASK			0x0080
-
-/*
- *****************************************************************************
- *
- *	Baud Rate Generator Interface Registers
- *
- *****************************************************************************
- */
-
-#define	BRG_BCR				0x0000
-#define	BRG_BTR				0x0004
-
-#endif /*_PPC_BOOT_MPSC_DEFS_H__ */
diff --git a/arch/ppc/boot/include/nonstdio.h b/arch/ppc/boot/include/nonstdio.h
deleted file mode 100644
index f2b5526faef3..000000000000
--- a/arch/ppc/boot/include/nonstdio.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * This is sort of a catchall for I/O related functions.  Stuff that
- * wouldn't be in 'stdio.h' normally is here, and it's 'nonstdio.h'
- * for a reason.  -- Tom
- */
-typedef int FILE;
-extern FILE *stdin, *stdout;
-#define NULL ((void *)0)
-#define EOF (-1)
-#define fopen(n, m) NULL
-#define fflush(f) 0
-#define fclose(f) 0
-#define perror(s) printf("%s: no files!\n", (s))
-
-extern int getc(void);
-extern int printf(const char *format, ...);
-extern int sprintf(char *str, const char *format, ...);
-extern int tstc(void);
-extern void exit(void);
-extern void outb(int port, unsigned char val);
-extern void putc(const char c);
-extern void puthex(unsigned long val);
-extern void puts(const char *);
-extern void udelay(long delay);
-extern unsigned char inb(int port);
-extern void board_isa_init(void);
-extern void ISA_init(unsigned long base);
diff --git a/arch/ppc/boot/include/of1275.h b/arch/ppc/boot/include/of1275.h
deleted file mode 100644
index 4ed88acfa73a..000000000000
--- a/arch/ppc/boot/include/of1275.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-typedef void *prom_handle;
-typedef void *ihandle;
-typedef void *phandle;
-typedef int (*prom_entry)(void *);
-
-#define OF_INVALID_HANDLE	((prom_handle)-1UL)
-
-extern prom_entry of_prom_entry;
-
-/* function declarations */
-
-int	call_prom(const char *service, int nargs, int nret, ...);
-int	call_prom_ret(const char *service, int nargs, int nret,
-		      unsigned int *rets, ...);
-void *	claim(unsigned int virt, unsigned int size, unsigned int align);
-int	map(unsigned int phys, unsigned int virt, unsigned int size);
-void	enter(void);
-void	exit(void);
-phandle	finddevice(const char *name);
-int	getprop(phandle node, const char *name, void *buf, int buflen);
-void	ofinit(prom_entry entry);
-int	ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr);
-int	read(ihandle instance, void *buf, int buflen);
-void	release(void *virt, unsigned int size);
-int	write(ihandle instance, void *buf, int buflen);
-
-/* inlines */
-
-extern inline void pause(void)
-{
-	enter();
-}
diff --git a/arch/ppc/boot/include/rs6000.h b/arch/ppc/boot/include/rs6000.h
deleted file mode 100644
index 433f45084e41..000000000000
--- a/arch/ppc/boot/include/rs6000.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/* IBM RS/6000 "XCOFF" file definitions for BFD.
-   Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-   FIXME: Can someone provide a transliteration of this name into ASCII?
-   Using the following chars caused a compiler warning on HIUX (so I replaced
-   them with octal escapes), and isn't useful without an understanding of what
-   character set it is.
-   Written by Mimi Ph\373\364ng-Th\345o V\365 of IBM
-   and John Gilmore of Cygnus Support.  */
-
-/********************** FILE HEADER **********************/
-
-struct external_filehdr {
-	char f_magic[2];	/* magic number			*/
-	char f_nscns[2];	/* number of sections		*/
-	char f_timdat[4];	/* time & date stamp		*/
-	char f_symptr[4];	/* file pointer to symtab	*/
-	char f_nsyms[4];	/* number of symtab entries	*/
-	char f_opthdr[2];	/* sizeof(optional hdr)		*/
-	char f_flags[2];	/* flags			*/
-};
-
-        /* IBM RS/6000 */
-#define U802WRMAGIC     0730    /* writeable text segments **chh**      */
-#define U802ROMAGIC     0735    /* readonly sharable text segments      */
-#define U802TOCMAGIC    0737    /* readonly text segments and TOC       */
-
-#define BADMAG(x)	\
-	((x).f_magic != U802ROMAGIC && (x).f_magic != U802WRMAGIC && \
-	 (x).f_magic != U802TOCMAGIC)
-
-#define	FILHDR	struct external_filehdr
-#define	FILHSZ	20
-
-
-/********************** AOUT "OPTIONAL HEADER" **********************/
-
-
-typedef struct
-{
-  unsigned char	magic[2];	/* type of file			*/
-  unsigned char	vstamp[2];	/* version stamp		*/
-  unsigned char	tsize[4];	/* text size in bytes, padded to FW bdry */
-  unsigned char	dsize[4];	/* initialized data "  "	*/
-  unsigned char	bsize[4];	/* uninitialized data "   "	*/
-  unsigned char	entry[4];	/* entry pt.			*/
-  unsigned char	text_start[4];	/* base of text used for this file */
-  unsigned char	data_start[4];	/* base of data used for this file */
-  unsigned char	o_toc[4];	/* address of TOC */
-  unsigned char	o_snentry[2];	/* section number of entry point */
-  unsigned char	o_sntext[2];	/* section number of .text section */
-  unsigned char	o_sndata[2];	/* section number of .data section */
-  unsigned char	o_sntoc[2];	/* section number of TOC */
-  unsigned char	o_snloader[2];	/* section number of .loader section */
-  unsigned char	o_snbss[2];	/* section number of .bss section */
-  unsigned char	o_algntext[2];	/* .text alignment */
-  unsigned char	o_algndata[2];	/* .data alignment */
-  unsigned char	o_modtype[2];	/* module type (??) */
-  unsigned char o_cputype[2];	/* cpu type */
-  unsigned char	o_maxstack[4];	/* max stack size (??) */
-  unsigned char o_maxdata[4];	/* max data size (??) */
-  unsigned char	o_resv2[12];	/* reserved */
-}
-AOUTHDR;
-
-#define AOUTSZ 72
-#define SMALL_AOUTSZ (28)
-#define AOUTHDRSZ 72
-
-#define	RS6K_AOUTHDR_OMAGIC	0x0107	/* old: text & data writeable */
-#define	RS6K_AOUTHDR_NMAGIC	0x0108	/* new: text r/o, data r/w */
-#define	RS6K_AOUTHDR_ZMAGIC	0x010B	/* paged: text r/o, both page-aligned */
-
-
-/********************** SECTION HEADER **********************/
-
-
-struct external_scnhdr {
-	char		s_name[8];	/* section name			*/
-	char		s_paddr[4];	/* physical address, aliased s_nlib */
-	char		s_vaddr[4];	/* virtual address		*/
-	char		s_size[4];	/* section size			*/
-	char		s_scnptr[4];	/* file ptr to raw data for section */
-	char		s_relptr[4];	/* file ptr to relocation	*/
-	char		s_lnnoptr[4];	/* file ptr to line numbers	*/
-	char		s_nreloc[2];	/* number of relocation entries	*/
-	char		s_nlnno[2];	/* number of line number entries*/
-	char		s_flags[4];	/* flags			*/
-};
-
-/*
- * names of "special" sections
- */
-#define _TEXT	".text"
-#define _DATA	".data"
-#define _BSS	".bss"
-#define _PAD	".pad"
-#define _LOADER	".loader"
-
-#define	SCNHDR	struct external_scnhdr
-#define	SCNHSZ	40
-
-/* XCOFF uses a special .loader section with type STYP_LOADER.  */
-#define STYP_LOADER 0x1000
-
-/* XCOFF uses a special .debug section with type STYP_DEBUG.  */
-#define STYP_DEBUG 0x2000
-
-/* XCOFF handles line number or relocation overflow by creating
-   another section header with STYP_OVRFLO set.  */
-#define STYP_OVRFLO 0x8000
-
-/********************** LINE NUMBERS **********************/
-
-/* 1 line number entry for every "breakpointable" source line in a section.
- * Line numbers are grouped on a per function basis; first entry in a function
- * grouping will have l_lnno = 0 and in place of physical address will be the
- * symbol table index of the function name.
- */
-struct external_lineno {
-	union {
-		char l_symndx[4];	/* function name symbol index, iff l_lnno == 0*/
-		char l_paddr[4];	/* (physical) address of line number	*/
-	} l_addr;
-	char l_lnno[2];	/* line number		*/
-};
-
-
-#define	LINENO	struct external_lineno
-#define	LINESZ	6
-
-
-/********************** SYMBOLS **********************/
-
-#define E_SYMNMLEN	8	/* # characters in a symbol name	*/
-#define E_FILNMLEN	14	/* # characters in a file name		*/
-#define E_DIMNUM	4	/* # array dimensions in auxiliary entry */
-
-struct external_syment
-{
-  union {
-    char e_name[E_SYMNMLEN];
-    struct {
-      char e_zeroes[4];
-      char e_offset[4];
-    } e;
-  } e;
-  char e_value[4];
-  char e_scnum[2];
-  char e_type[2];
-  char e_sclass[1];
-  char e_numaux[1];
-};
-
-
-
-#define N_BTMASK	(017)
-#define N_TMASK		(060)
-#define N_BTSHFT	(4)
-#define N_TSHIFT	(2)
-
-
-union external_auxent {
-	struct {
-		char x_tagndx[4];	/* str, un, or enum tag indx */
-		union {
-			struct {
-			    char  x_lnno[2]; /* declaration line number */
-			    char  x_size[2]; /* str/union/array size */
-			} x_lnsz;
-			char x_fsize[4];	/* size of function */
-		} x_misc;
-		union {
-			struct {		/* if ISFCN, tag, or .bb */
-			    char x_lnnoptr[4];	/* ptr to fcn line # */
-			    char x_endndx[4];	/* entry ndx past block end */
-			} x_fcn;
-			struct {		/* if ISARY, up to 4 dimen. */
-			    char x_dimen[E_DIMNUM][2];
-			} x_ary;
-		} x_fcnary;
-		char x_tvndx[2];		/* tv index */
-	} x_sym;
-
-	union {
-		char x_fname[E_FILNMLEN];
-		struct {
-			char x_zeroes[4];
-			char x_offset[4];
-		} x_n;
-	} x_file;
-
-	struct {
-		char x_scnlen[4];			/* section length */
-		char x_nreloc[2];	/* # relocation entries */
-		char x_nlinno[2];	/* # line numbers */
-	} x_scn;
-
-        struct {
-		char x_tvfill[4];	/* tv fill value */
-		char x_tvlen[2];	/* length of .tv */
-		char x_tvran[2][2];	/* tv range */
-	} x_tv;		/* info about .tv section (in auxent of symbol .tv)) */
-
-	struct {
-		unsigned char x_scnlen[4];
-		unsigned char x_parmhash[4];
-		unsigned char x_snhash[2];
-		unsigned char x_smtyp[1];
-		unsigned char x_smclas[1];
-		unsigned char x_stab[4];
-		unsigned char x_snstab[2];
-	} x_csect;
-
-};
-
-#define	SYMENT	struct external_syment
-#define	SYMESZ	18
-#define	AUXENT	union external_auxent
-#define	AUXESZ	18
-#define DBXMASK 0x80		/* for dbx storage mask */
-#define SYMNAME_IN_DEBUG(symptr) ((symptr)->n_sclass & DBXMASK)
-
-
-
-/********************** RELOCATION DIRECTIVES **********************/
-
-
-struct external_reloc {
-  char r_vaddr[4];
-  char r_symndx[4];
-  char r_size[1];
-  char r_type[1];
-};
-
-
-#define RELOC struct external_reloc
-#define RELSZ 10
-
-#define DEFAULT_DATA_SECTION_ALIGNMENT 4
-#define DEFAULT_BSS_SECTION_ALIGNMENT 4
-#define DEFAULT_TEXT_SECTION_ALIGNMENT 4
-/* For new sections we havn't heard of before */
-#define DEFAULT_SECTION_ALIGNMENT 4
diff --git a/arch/ppc/boot/include/serial.h b/arch/ppc/boot/include/serial.h
deleted file mode 100644
index d710eabb4256..000000000000
--- a/arch/ppc/boot/include/serial.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * A really private header file for the (dumb) serial driver in arch/ppc/boot
- *
- * Shamelessly taken from include/linux/serialP.h:
- *
- * Copyright (C) 1997 by Theodore Ts'o.
- *
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- */
-
-#ifndef _PPC_BOOT_SERIALP_H
-#define _PPC_BOOT_SERIALP_H
-
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * Given that this is how SERIAL_PORT_DFNS are done, and that we need
- * to use a few of their fields, we need to have our own copy of it.
- */
-struct serial_state {
-	int	magic;
-	int	baud_base;
-	unsigned long	port;
-	int	irq;
-	int	flags;
-	int	hub6;
-	int	type;
-	int	line;
-	int	revision;	/* Chip revision (950) */
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	count;
-	u8	*iomem_base;
-	u16	iomem_reg_shift;
-	unsigned short	close_delay;
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned long	icount;
-	int	io_type;
-	void    *info;
-	void    *dev;
-};
-#endif /* _PPC_BOOT_SERIAL_H */
diff --git a/arch/ppc/boot/ld.script b/arch/ppc/boot/ld.script
deleted file mode 100644
index d4dd8f15395e..000000000000
--- a/arch/ppc/boot/ld.script
+++ /dev/null
@@ -1,85 +0,0 @@
-OUTPUT_ARCH(powerpc:common)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    *(.text)
-    *(.fixup)
-    __relocate_start = .;
-    *(.relocate_code)
-    __relocate_end = .;
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-
-  /* Read-write section, merged into data segment: */
-  . = ALIGN(4096);
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.data.boot)
-    *(.sdata)
-    *(.sdata2)
-    *(.got.plt) *(.got)
-    *(.dynamic)
-    *(.rodata)
-    *(.rodata.*)
-    *(.rodata1)
-    *(.got1)
-    __image_begin = .;
-    *(.image)
-    __image_end = .;
-    . = ALIGN(4096);
-    __ramdisk_begin = .;
-    *(.ramdisk)
-    __ramdisk_end = .;
-    . = ALIGN(4096);
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = ALIGN(4096);
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-
-  /DISCARD/ : {
-    *(__ksymtab)
-    *(__ksymtab_strings)
-    *(__bug_table)
-    *(__kcrctab)
-  }
-
-}
diff --git a/arch/ppc/boot/lib/.gitignore b/arch/ppc/boot/lib/.gitignore
deleted file mode 100644
index 1629a6167755..000000000000
--- a/arch/ppc/boot/lib/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-inffast.c
-inflate.c
-inftrees.c
diff --git a/arch/ppc/boot/lib/Makefile b/arch/ppc/boot/lib/Makefile
deleted file mode 100644
index 2f995f712ec5..000000000000
--- a/arch/ppc/boot/lib/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for some libs needed by zImage.
-#
-
-CFLAGS_kbd.o	:= -Idrivers/char
-CFLAGS_vreset.o := -Iarch/ppc/boot/include
-
-zlib  := inffast.c inflate.c inftrees.c
-	 
-lib-y += $(zlib:.c=.o) div64.o
-lib-$(CONFIG_VGA_CONSOLE) += vreset.o kbd.o
-
-
-# zlib files needs header from their original place
-EXTRA_CFLAGS += -Ilib/zlib_inflate
-
-quiet_cmd_copy_zlib = COPY    $@
-      cmd_copy_zlib = cat $< > $@
-
-$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
-	$(call cmd,copy_zlib)
-
-clean-files := $(zlib)
diff --git a/arch/ppc/boot/lib/div64.S b/arch/ppc/boot/lib/div64.S
deleted file mode 100644
index 3527569e9926..000000000000
--- a/arch/ppc/boot/lib/div64.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Divide a 64-bit unsigned number by a 32-bit unsigned number.
- * This routine assumes that the top 32 bits of the dividend are
- * non-zero to start with.
- * On entry, r3 points to the dividend, which get overwritten with
- * the 64-bit quotient, and r4 contains the divisor.
- * On exit, r3 contains the remainder.
- *
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-_GLOBAL(__div64_32)
-	lwz	r5,0(r3)	# get the dividend into r5/r6
-	lwz	r6,4(r3)
-	cmplw	r5,r4
-	li	r7,0
-	li	r8,0
-	blt	1f
-	divwu	r7,r5,r4	# if dividend.hi >= divisor,
-	mullw	r0,r7,r4	# quotient.hi = dividend.hi / divisor
-	subf.	r5,r0,r5	# dividend.hi %= divisor
-	beq	3f
-1:	mr	r11,r5		# here dividend.hi != 0
-	andis.	r0,r5,0xc000
-	bne	2f
-	cntlzw	r0,r5		# we are shifting the dividend right
-	li	r10,-1		# to make it < 2^32, and shifting
-	srw	r10,r10,r0	# the divisor right the same amount,
-	add	r9,r4,r10	# rounding up (so the estimate cannot
-	andc	r11,r6,r10	# ever be too large, only too small)
-	andc	r9,r9,r10
-	or	r11,r5,r11
-	rotlw	r9,r9,r0
-	rotlw	r11,r11,r0
-	divwu	r11,r11,r9	# then we divide the shifted quantities
-2:	mullw	r10,r11,r4	# to get an estimate of the quotient,
-	mulhwu	r9,r11,r4	# multiply the estimate by the divisor,
-	subfc	r6,r10,r6	# take the product from the divisor,
-	add	r8,r8,r11	# and add the estimate to the accumulated
-	subfe.	r5,r9,r5	# quotient
-	bne	1b
-3:	cmplw	r6,r4
-	blt	4f
-	divwu	r0,r6,r4	# perform the remaining 32-bit division
-	mullw	r10,r0,r4	# and get the remainder
-	add	r8,r8,r0
-	subf	r6,r10,r6
-4:	stw	r7,0(r3)	# return the quotient in *r3
-	stw	r8,4(r3)
-	mr	r3,r6		# return the remainder in r3
-	blr
diff --git a/arch/ppc/boot/lib/kbd.c b/arch/ppc/boot/lib/kbd.c
deleted file mode 100644
index 3931727434de..000000000000
--- a/arch/ppc/boot/lib/kbd.c
+++ /dev/null
@@ -1,248 +0,0 @@
-#include <linux/keyboard.h>
-
-#include "defkeymap.c"	/* yeah I know it's bad -- Cort */
-
-
-unsigned char shfts, ctls, alts, caps;
-
-#define	KBDATAP		0x60	/* kbd data port */
-#define	KBSTATUSPORT	0x61	/* kbd status */
-#define	KBSTATP		0x64	/* kbd status port */
-#define	KBINRDY		0x01
-#define	KBOUTRDY	0x02
-
-extern unsigned char inb(int port);
-extern void outb(int port, char val);
-extern void puts(const char *);
-extern void puthex(unsigned long val);
-extern void udelay(long x);
-
-static int kbd(int noblock)
-{
-	unsigned char dt, brk, val;
-	unsigned code;
-loop:
-	if (noblock) {
-	    if ((inb(KBSTATP) & KBINRDY) == 0)
-		return (-1);
-	} else while((inb(KBSTATP) & KBINRDY) == 0) ;
-
-	dt = inb(KBDATAP);
-
-	brk = dt & 0x80;	/* brk == 1 on key release */
-	dt = dt & 0x7f;		/* keycode */
-
-	if (shfts)
-	    code = shift_map[dt];
-	else if (ctls)
-	    code = ctrl_map[dt];
-	else
-	    code = plain_map[dt];
-
-	val = KVAL(code);
-	switch (KTYP(code) & 0x0f) {
-	    case KT_LATIN:
-		if (brk)
-		    break;
-		if (alts)
-		    val |= 0x80;
-		if (val == 0x7f)	/* map delete to backspace */
-		    val = '\b';
-		return val;
-
-	    case KT_LETTER:
-		if (brk)
-		    break;
-		if (caps)
-		    val -= 'a'-'A';
-		return val;
-
-	    case KT_SPEC:
-		if (brk)
-		    break;
-		if (val == KVAL(K_CAPS))
-		    caps = !caps;
-		else if (val == KVAL(K_ENTER)) {
-enter:		    /* Wait for key up */
-		    while (1) {
-			while((inb(KBSTATP) & KBINRDY) == 0) ;
-			dt = inb(KBDATAP);
-			if (dt & 0x80) /* key up */ break;
-		    }
-		    return 10;
-		}
-		break;
-
-	    case KT_PAD:
-		if (brk)
-		    break;
-		if (val < 10)
-		    return val;
-		if (val == KVAL(K_PENTER))
-		    goto enter;
-		break;
-
-	    case KT_SHIFT:
-		switch (val) {
-		    case KG_SHIFT:
-		    case KG_SHIFTL:
-		    case KG_SHIFTR:
-			shfts = brk ? 0 : 1;
-			break;
-		    case KG_ALT:
-		    case KG_ALTGR:
-			alts = brk ? 0 : 1;
-			break;
-		    case KG_CTRL:
-		    case KG_CTRLL:
-		    case KG_CTRLR:
-			ctls = brk ? 0 : 1;
-			break;
-		}
-		break;
-
-	    case KT_LOCK:
-		switch (val) {
-		    case KG_SHIFT:
-		    case KG_SHIFTL:
-		    case KG_SHIFTR:
-			if (brk)
-			    shfts = !shfts;
-			break;
-		    case KG_ALT:
-		    case KG_ALTGR:
-			if (brk)
-			    alts = !alts;
-			break;
-		    case KG_CTRL:
-		    case KG_CTRLL:
-		    case KG_CTRLR:
-			if (brk)
-			    ctls = !ctls;
-			break;
-		}
-		break;
-	}
-	if (brk) return (-1);  /* Ignore initial 'key up' codes */
-	goto loop;
-}
-
-static int __kbdreset(void)
-{
-	unsigned char c;
-	int i, t;
-
-	/* flush input queue */
-	t = 2000;
-	while ((inb(KBSTATP) & KBINRDY))
-	{
-		(void)inb(KBDATAP);
-		if (--t == 0)
-			return 1;
-	}
-	/* Send self-test */
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0)
-			return 2;
-	outb(KBSTATP,0xAA);
-	t = 200000;
-	while ((inb(KBSTATP) & KBINRDY) == 0)	/* wait input ready */
-		if (--t == 0)
-			return 3;
-	if ((c = inb(KBDATAP)) != 0x55)
-	{
-		puts("Keyboard self test failed - result:");
-		puthex(c);
-		puts("\n");
-	}
-	/* Enable interrupts and keyboard controller */
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 4;
-	outb(KBSTATP,0x60);
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 5;
-	outb(KBDATAP,0x45);
-	for (i = 0;  i < 10000;  i++) udelay(1);
-
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 6;
-	outb(KBSTATP,0x20);
-	t = 200000;
-	while ((inb(KBSTATP) & KBINRDY) == 0)	/* wait input ready */
-		if (--t == 0) return 7;
-	if (! (inb(KBDATAP) & 0x40)) {
-		/*
-		 * Quote from PS/2 System Reference Manual:
-		 *
-		 * "Address hex 0060 and address hex 0064 should be
-		 * written only when the input-buffer-full bit and
-		 * output-buffer-full bit in the Controller Status
-		 * register are set 0." (KBINRDY and KBOUTRDY)
-		 */
-		t = 200000;
-		while (inb(KBSTATP) & (KBINRDY | KBOUTRDY))
-			if (--t == 0) return 8;
-		outb(KBDATAP,0xF0);
-		t = 200000;
-		while (inb(KBSTATP) & (KBINRDY | KBOUTRDY))
-			if (--t == 0) return 9;
-		outb(KBDATAP,0x01);
-	}
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 10;
-	outb(KBSTATP,0xAE);
-	return 0;
-}
-
-static void kbdreset(void)
-{
-	int ret = __kbdreset();
-
-	if (ret) {
-		puts("__kbdreset failed: ");
-		puthex(ret);
-		puts("\n");
-	}
-}
-
-/* We have to actually read the keyboard when CRT_tstc is called,
- * since the pending data might be a key release code, and therefore
- * not valid data.  In this case, kbd() will return -1, even though there's
- * data to be read.  Of course, we might actually read a valid key press,
- * in which case it gets queued into key_pending for use by CRT_getc.
- */
-
-static int kbd_reset = 0;
-
-static int key_pending = -1;
-
-int CRT_getc(void)
-{
-	int c;
-	if (!kbd_reset) {kbdreset(); kbd_reset++; }
-
-        if (key_pending != -1) {
-                c = key_pending;
-                key_pending = -1;
-                return c;
-        } else {
-	while ((c = kbd(0)) == 0) ;
-                return c;
-        }
-}
-
-int CRT_tstc(void)
-{
-	if (!kbd_reset) {kbdreset(); kbd_reset++; }
-
-        while (key_pending == -1 && ((inb(KBSTATP) & KBINRDY) != 0)) {
-                key_pending = kbd(1);
-        }
-
-        return (key_pending != -1);
-}
diff --git a/arch/ppc/boot/lib/vreset.c b/arch/ppc/boot/lib/vreset.c
deleted file mode 100644
index 98539e9f7f96..000000000000
--- a/arch/ppc/boot/lib/vreset.c
+++ /dev/null
@@ -1,805 +0,0 @@
-/*
- * vreset.c
- *
- * Initialize the VGA control registers to 80x25 text mode.
- *
- * Adapted from a program by:
- *                                      Steve Sellgren
- *                                      San Francisco Indigo Company
- *                                      sfindigo!sellgren@uunet.uu.net
- *
- * Original concept by:
- *                                      Gary Thomas <gdt@linuxppc.org>
- * Adapted for Moto boxes by:
- *                                      Pat Kane & Mark Scott, 1996
- * Adapted for IBM portables by:
- *                                      Takeshi Ishimoto
- * Multi-console support:
- *                                      Terje Malmedal <terje.malmedal@usit.uio.no>
- */
-
-#include "iso_font.h"
-#include "nonstdio.h"
-
-extern char *vidmem;
-extern int lines, cols;
-struct VaRegs;
-
-/*
- * VGA Register
- */
-struct VgaRegs
-{
-	unsigned short io_port;
-	unsigned char  io_index;
-	unsigned char  io_value;
-};
-
-void unlockVideo(int slot);
-void setTextRegs(struct VgaRegs *svp);
-void setTextCLUT(int shift);
-void clearVideoMemory(void);
-void loadFont(unsigned char *ISA_mem);
-
-static void mdelay(int ms)
-{
-	for (; ms > 0; --ms)
-		udelay(1000);
-}
-
-/*
- * Default console text mode registers  used to reset
- * graphics adapter.
- */
-#define NREGS 54
-#define ENDMK  0xFFFF  /* End marker */
-
-#define S3Vendor	0x5333
-#define CirrusVendor    0x1013
-#define DiamondVendor   0x100E
-#define MatroxVendor    0x102B
-#define ParadiseVendor  0x101C
-
-struct VgaRegs GenVgaTextRegs[NREGS+1] = {
-	/* port		index	value  */
-	/* SR Regs */
-	{ 0x3c4,	0x1,	0x0 },
-	{ 0x3c4,	0x2,	0x3 },
-	{ 0x3c4,	0x3,	0x0 },
-	{ 0x3c4,	0x4,	0x2 },
-	 /* CR Regs */
-	{ 0x3d4,	0x0,	0x5f },
-	{ 0x3d4,	0x1,	0x4f },
-	{ 0x3d4,	0x2,	0x50 },
-	{ 0x3d4,	0x3,	0x82 },
-	{ 0x3d4,	0x4,	0x55 },
-	{ 0x3d4,	0x5,	0x81 },
-	{ 0x3d4,	0x6,	0xbf },
-	{ 0x3d4,	0x7,	0x1f },
-	{ 0x3d4,	0x8,	0x00 },
-	{ 0x3d4,	0x9,	0x4f },
-	{ 0x3d4,	0xa,	0x0d },
-	{ 0x3d4,	0xb,	0x0e },
-	{ 0x3d4,	0xc,	0x00 },
-	{ 0x3d4,	0xd,	0x00 },
-	{ 0x3d4,	0xe,	0x00 },
-	{ 0x3d4,	0xf,	0x00 },
-	{ 0x3d4,	0x10,	0x9c },
-	{ 0x3d4,	0x11,	0x8e },
-	{ 0x3d4,	0x12,	0x8f },
-	{ 0x3d4,	0x13,	0x28 },
-	{ 0x3d4,	0x14,	0x1f },
-	{ 0x3d4,	0x15,	0x96 },
-	{ 0x3d4,	0x16,	0xb9 },
-	{ 0x3d4,	0x17,	0xa3 },
-	 /* GR Regs */
-	{ 0x3ce,	0x0,	0x0 },
-	{ 0x3ce,	0x1,	0x0 },
-	{ 0x3ce,	0x2,	0x0 },
-	{ 0x3ce,	0x3,	0x0 },
-	{ 0x3ce,	0x4,	0x0 },
-	{ 0x3ce,	0x5,	0x10 },
-	{ 0x3ce,	0x6,	0xe },
-	{ 0x3ce,	0x7,	0x0 },
-	{ 0x3ce,	0x8,	0xff },
-	{ ENDMK }
-};
-
-struct RGBColors
-{
-  unsigned char r, g, b;
-};
-
-/*
- * Default console text mode color table.
- * These values were obtained by booting Linux with
- * text mode firmware & then dumping the registers.
- */
-struct RGBColors TextCLUT[256] =
-{
-	/* red	green	blue  */
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x2a },
-	{ 0x0,	0x2a,	0x0 },
-	{ 0x0,	0x2a,	0x2a },
-	{ 0x2a,	0x0,	0x0 },
-	{ 0x2a,	0x0,	0x2a },
-	{ 0x2a,	0x2a,	0x0 },
-	{ 0x2a,	0x2a,	0x2a },
-	{ 0x0,	0x0,	0x15 },
-	{ 0x0,	0x0,	0x3f },
-	{ 0x0,	0x2a,	0x15 },
-	{ 0x0,	0x2a,	0x3f },
-	{ 0x2a,	0x0,	0x15 },
-	{ 0x2a,	0x0,	0x3f },
-	{ 0x2a,	0x2a,	0x15 },
-	{ 0x2a,	0x2a,	0x3f },
-	{ 0x0,	0x15,	0x0 },
-	{ 0x0,	0x15,	0x2a },
-	{ 0x0,	0x3f,	0x0 },
-	{ 0x0,	0x3f,	0x2a },
-	{ 0x2a,	0x15,	0x0 },
-	{ 0x2a,	0x15,	0x2a },
-	{ 0x2a,	0x3f,	0x0 },
-	{ 0x2a,	0x3f,	0x2a },
-	{ 0x0,	0x15,	0x15 },
-	{ 0x0,	0x15,	0x3f },
-	{ 0x0,	0x3f,	0x15 },
-	{ 0x0,	0x3f,	0x3f },
-	{ 0x2a,	0x15,	0x15 },
-	{ 0x2a,	0x15,	0x3f },
-	{ 0x2a,	0x3f,	0x15 },
-	{ 0x2a,	0x3f,	0x3f },
-	{ 0x15,	0x0,	0x0 },
-	{ 0x15,	0x0,	0x2a },
-	{ 0x15,	0x2a,	0x0 },
-	{ 0x15,	0x2a,	0x2a },
-	{ 0x3f,	0x0,	0x0 },
-	{ 0x3f,	0x0,	0x2a },
-	{ 0x3f,	0x2a,	0x0 },
-	{ 0x3f,	0x2a,	0x2a },
-	{ 0x15,	0x0,	0x15 },
-	{ 0x15,	0x0,	0x3f },
-	{ 0x15,	0x2a,	0x15 },
-	{ 0x15,	0x2a,	0x3f },
-	{ 0x3f,	0x0,	0x15 },
-	{ 0x3f,	0x0,	0x3f },
-	{ 0x3f,	0x2a,	0x15 },
-	{ 0x3f,	0x2a,	0x3f },
-	{ 0x15,	0x15,	0x0 },
-	{ 0x15,	0x15,	0x2a },
-	{ 0x15,	0x3f,	0x0 },
-	{ 0x15,	0x3f,	0x2a },
-	{ 0x3f,	0x15,	0x0 },
-	{ 0x3f,	0x15,	0x2a },
-	{ 0x3f,	0x3f,	0x0 },
-	{ 0x3f,	0x3f,	0x2a },
-	{ 0x15,	0x15,	0x15 },
-	{ 0x15,	0x15,	0x3f },
-	{ 0x15,	0x3f,	0x15 },
-	{ 0x15,	0x3f,	0x3f },
-	{ 0x3f,	0x15,	0x15 },
-	{ 0x3f,	0x15,	0x3f },
-	{ 0x3f,	0x3f,	0x15 },
-	{ 0x3f,	0x3f,	0x3f },
-	{ 0x39,	0xc,	0x5 },
-	{ 0x15,	0x2c,	0xf },
-	{ 0x26,	0x10,	0x3d },
-	{ 0x29,	0x29,	0x38 },
-	{ 0x4,	0x1a,	0xe },
-	{ 0x2,	0x1e,	0x3a },
-	{ 0x3c,	0x25,	0x33 },
-	{ 0x3c,	0xc,	0x2c },
-	{ 0x3f,	0x3,	0x2b },
-	{ 0x1c,	0x9,	0x13 },
-	{ 0x25,	0x2a,	0x35 },
-	{ 0x1e,	0xa,	0x38 },
-	{ 0x24,	0x8,	0x3 },
-	{ 0x3,	0xe,	0x36 },
-	{ 0xc,	0x6,	0x2a },
-	{ 0x26,	0x3,	0x32 },
-	{ 0x5,	0x2f,	0x33 },
-	{ 0x3c,	0x35,	0x2f },
-	{ 0x2d,	0x26,	0x3e },
-	{ 0xd,	0xa,	0x10 },
-	{ 0x25,	0x3c,	0x11 },
-	{ 0xd,	0x4,	0x2e },
-	{ 0x5,	0x19,	0x3e },
-	{ 0xc,	0x13,	0x34 },
-	{ 0x2b,	0x6,	0x24 },
-	{ 0x4,	0x3,	0xd },
-	{ 0x2f,	0x3c,	0xc },
-	{ 0x2a,	0x37,	0x1f },
-	{ 0xf,	0x12,	0x38 },
-	{ 0x38,	0xe,	0x2a },
-	{ 0x12,	0x2f,	0x19 },
-	{ 0x29,	0x2e,	0x31 },
-	{ 0x25,	0x13,	0x3e },
-	{ 0x33,	0x3e,	0x33 },
-	{ 0x1d,	0x2c,	0x25 },
-	{ 0x15,	0x15,	0x5 },
-	{ 0x32,	0x25,	0x39 },
-	{ 0x1a,	0x7,	0x1f },
-	{ 0x13,	0xe,	0x1d },
-	{ 0x36,	0x17,	0x34 },
-	{ 0xf,	0x15,	0x23 },
-	{ 0x2,	0x35,	0xd },
-	{ 0x15,	0x3f,	0xc },
-	{ 0x14,	0x2f,	0xf },
-	{ 0x19,	0x21,	0x3e },
-	{ 0x27,	0x11,	0x2f },
-	{ 0x38,	0x3f,	0x3c },
-	{ 0x36,	0x2d,	0x15 },
-	{ 0x16,	0x17,	0x2 },
-	{ 0x1,	0xa,	0x3d },
-	{ 0x1b,	0x11,	0x3f },
-	{ 0x21,	0x3c,	0xd },
-	{ 0x1a,	0x39,	0x3d },
-	{ 0x8,	0xe,	0xe },
-	{ 0x22,	0x21,	0x23 },
-	{ 0x1e,	0x30,	0x5 },
-	{ 0x1f,	0x22,	0x3d },
-	{ 0x1e,	0x2f,	0xa },
-	{ 0x0,	0x1c,	0xe },
-	{ 0x0,	0x1c,	0x15 },
-	{ 0x0,	0x1c,	0x1c },
-	{ 0x0,	0x15,	0x1c },
-	{ 0x0,	0xe,	0x1c },
-	{ 0x0,	0x7,	0x1c },
-	{ 0xe,	0xe,	0x1c },
-	{ 0x11,	0xe,	0x1c },
-	{ 0x15,	0xe,	0x1c },
-	{ 0x18,	0xe,	0x1c },
-	{ 0x1c,	0xe,	0x1c },
-	{ 0x1c,	0xe,	0x18 },
-	{ 0x1c,	0xe,	0x15 },
-	{ 0x1c,	0xe,	0x11 },
-	{ 0x1c,	0xe,	0xe },
-	{ 0x1c,	0x11,	0xe },
-	{ 0x1c,	0x15,	0xe },
-	{ 0x1c,	0x18,	0xe },
-	{ 0x1c,	0x1c,	0xe },
-	{ 0x18,	0x1c,	0xe },
-	{ 0x15,	0x1c,	0xe },
-	{ 0x11,	0x1c,	0xe },
-	{ 0xe,	0x1c,	0xe },
-	{ 0xe,	0x1c,	0x11 },
-	{ 0xe,	0x1c,	0x15 },
-	{ 0xe,	0x1c,	0x18 },
-	{ 0xe,	0x1c,	0x1c },
-	{ 0xe,	0x18,	0x1c },
-	{ 0xe,	0x15,	0x1c },
-	{ 0xe,	0x11,	0x1c },
-	{ 0x14,	0x14,	0x1c },
-	{ 0x16,	0x14,	0x1c },
-	{ 0x18,	0x14,	0x1c },
-	{ 0x1a,	0x14,	0x1c },
-	{ 0x1c,	0x14,	0x1c },
-	{ 0x1c,	0x14,	0x1a },
-	{ 0x1c,	0x14,	0x18 },
-	{ 0x1c,	0x14,	0x16 },
-	{ 0x1c,	0x14,	0x14 },
-	{ 0x1c,	0x16,	0x14 },
-	{ 0x1c,	0x18,	0x14 },
-	{ 0x1c,	0x1a,	0x14 },
-	{ 0x1c,	0x1c,	0x14 },
-	{ 0x1a,	0x1c,	0x14 },
-	{ 0x18,	0x1c,	0x14 },
-	{ 0x16,	0x1c,	0x14 },
-	{ 0x14,	0x1c,	0x14 },
-	{ 0x14,	0x1c,	0x16 },
-	{ 0x14,	0x1c,	0x18 },
-	{ 0x14,	0x1c,	0x1a },
-	{ 0x14,	0x1c,	0x1c },
-	{ 0x14,	0x1a,	0x1c },
-	{ 0x14,	0x18,	0x1c },
-	{ 0x14,	0x16,	0x1c },
-	{ 0x0,	0x0,	0x10 },
-	{ 0x4,	0x0,	0x10 },
-	{ 0x8,	0x0,	0x10 },
-	{ 0xc,	0x0,	0x10 },
-	{ 0x10,	0x0,	0x10 },
-	{ 0x10,	0x0,	0xc },
-	{ 0x10,	0x0,	0x8 },
-	{ 0x10,	0x0,	0x4 },
-	{ 0x10,	0x0,	0x0 },
-	{ 0x10,	0x4,	0x0 },
-	{ 0x10,	0x8,	0x0 },
-	{ 0x10,	0xc,	0x0 },
-	{ 0x10,	0x10,	0x0 },
-	{ 0xc,	0x10,	0x0 },
-	{ 0x8,	0x10,	0x0 },
-	{ 0x4,	0x10,	0x0 },
-	{ 0x0,	0x10,	0x0 },
-	{ 0x0,	0x10,	0x4 },
-	{ 0x0,	0x10,	0x8 },
-	{ 0x0,	0x10,	0xc },
-	{ 0x0,	0x10,	0x10 },
-	{ 0x0,	0xc,	0x10 },
-	{ 0x0,	0x8,	0x10 },
-	{ 0x0,	0x4,	0x10 },
-	{ 0x8,	0x8,	0x10 },
-	{ 0xa,	0x8,	0x10 },
-	{ 0xc,	0x8,	0x10 },
-	{ 0xe,	0x8,	0x10 },
-	{ 0x10,	0x8,	0x10 },
-	{ 0x10,	0x8,	0xe },
-	{ 0x10,	0x8,	0xc },
-	{ 0x10,	0x8,	0xa },
-	{ 0x10,	0x8,	0x8 },
-	{ 0x10,	0xa,	0x8 },
-	{ 0x10,	0xc,	0x8 },
-	{ 0x10,	0xe,	0x8 },
-	{ 0x10,	0x10,	0x8 },
-	{ 0xe,	0x10,	0x8 },
-	{ 0xc,	0x10,	0x8 },
-	{ 0xa,	0x10,	0x8 },
-	{ 0x8,	0x10,	0x8 },
-	{ 0x8,	0x10,	0xa },
-	{ 0x8,	0x10,	0xc },
-	{ 0x8,	0x10,	0xe },
-	{ 0x8,	0x10,	0x10 },
-	{ 0x8,	0xe,	0x10 },
-	{ 0x8,	0xc,	0x10 },
-	{ 0x8,	0xa,	0x10 },
-	{ 0xb,	0xb,	0x10 },
-	{ 0xc,	0xb,	0x10 },
-	{ 0xd,	0xb,	0x10 },
-	{ 0xf,	0xb,	0x10 },
-	{ 0x10,	0xb,	0x10 },
-	{ 0x10,	0xb,	0xf },
-	{ 0x10,	0xb,	0xd },
-	{ 0x10,	0xb,	0xc },
-	{ 0x10,	0xb,	0xb },
-	{ 0x10,	0xc,	0xb },
-	{ 0x10,	0xd,	0xb },
-	{ 0x10,	0xf,	0xb },
-	{ 0x10,	0x10,	0xb },
-	{ 0xf,	0x10,	0xb },
-	{ 0xd,	0x10,	0xb },
-	{ 0xc,	0x10,	0xb },
-	{ 0xb,	0x10,	0xb },
-	{ 0xb,	0x10,	0xc },
-	{ 0xb,	0x10,	0xd },
-	{ 0xb,	0x10,	0xf },
-	{ 0xb,	0x10,	0x10 },
-	{ 0xb,	0xf,	0x10 },
-	{ 0xb,	0xd,	0x10 },
-	{ 0xb,	0xc,	0x10 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 }
-};
-
-unsigned char AC[21] = {
-    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-    0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F,
-    0x0C, 0x00, 0x0F, 0x08, 0x00};
-
-static int scanPCI(int start_slt);
-static int PCIVendor(int);
-#ifdef DEBUG
-static void printslots(void);
-#endif
-extern void puthex(unsigned long);
-extern void puts(const char *);
-static void unlockS3(void);
-
-static inline void
-outw(int port, unsigned short val)
-{
-	outb(port, val >> 8);
-	outb(port+1, val);
-}
-
-int
-vga_init(unsigned char *ISA_mem)
-{
-	int slot;
-	struct VgaRegs *VgaTextRegs;
-
-	/* See if VGA already in TEXT mode - exit if so! */
-	outb(0x3CE, 0x06);
-	if ((inb(0x3CF) & 0x01) == 0){
-		puts("VGA already in text mode\n");
-		return 0;
-	}
-
-	/* If no VGA responding in text mode, then we have some work to do...
-	 */
-	slot = -1;
-	while((slot = scanPCI(slot)) > -1) { /* find video card in use  */
-		unlockVideo(slot);           /* enable I/O to card      */
-		VgaTextRegs = GenVgaTextRegs;
-
-		switch (PCIVendor(slot)) {
-		default:
-			break;
-		case(S3Vendor):
-			unlockS3();
-			break;
-
-		case(CirrusVendor):
-			outw(0x3C4, 0x0612);       /* unlock ext regs */
-			outw(0x3C4, 0x0700);       /* reset ext sequence mode */
-			break;
-
-		case(ParadiseVendor):                 /* IBM Portable 850 */
-			outw(0x3ce, 0x0f05);      /* unlock pardise registers */
-			outw(0x3c4, 0x0648);
-			outw(0x3d4, 0x2985);
-			outw(0x3d4, 0x34a6);
-			outb(0x3ce, 0x0b);       /* disable linear addressing */
-			outb(0x3cf, inb(0x3cf) & ~0x30);
-			outw(0x3c4, 0x1400);
-			outb(0x3ce, 0x0e);       /* disable 256 color mode */
-			outb(0x3cf, inb(0x3cf) & ~0x01);
-			outb(0xd00, 0xff);       /* enable auto-centering */
-			if (!(inb(0xd01) & 0x03)) {
-				outb(0x3d4, 0x33);
-				outb(0x3d5, inb(0x3d5) & ~0x90);
-				outb(0x3d4, 0x32);
-				outb(0x3d5, inb(0x3d5) | 0x04);
-				outw(0x3d4, 0x0250);
-				outw(0x3d4, 0x07ba);
-				outw(0x3d4, 0x0900);
-				outw(0x3d4, 0x15e7);
-				outw(0x3d4, 0x2a95);
-			}
-			outw(0x3d4, 0x34a0);
-			break;
-
-	#if 0 /* Untested - probably doesn't work */
-		case(MatroxVendor):
-		case(DiamondVendor):
-			puts("VGA Chip Vendor ID: ");
-			puthex(PCIVendor(slot));
-			puts("\n");
-			mdelay(1000);
-	#endif
-		};
-
-		outw(0x3C4, 0x0120);           /* disable video              */
-		setTextRegs(VgaTextRegs);      /* initial register setup     */
-		setTextCLUT(0);                /* load color lookup table    */
-		loadFont(ISA_mem);             /* load font                  */
-		setTextRegs(VgaTextRegs);      /* reload registers           */
-		outw(0x3C4, 0x0100);           /* re-enable video            */
-		clearVideoMemory();
-
-		if (PCIVendor(slot) == S3Vendor) {
-			outb(0x3c2, 0x63);                  /* MISC */
-		} /* endif */
-
-	#ifdef DEBUG
-		printslots();
-		mdelay(5000);
-	#endif
-
-		mdelay(1000);	/* give time for the video monitor to come up */
-        }
-	return (1);  /* 'CRT' I/O supported */
-}
-
-/*
- * Write to VGA Attribute registers.
- */
-void
-writeAttr(unsigned char index, unsigned char data, unsigned char videoOn)
-{
-	unsigned char v;
-	v = inb(0x3da);   /* reset attr. address toggle */
-	if (videoOn)
-		outb(0x3c0, (index & 0x1F) | 0x20);
-	else
-		outb(0x3c0, (index & 0x1F));
-	outb(0x3c0, data);
-}
-
-void
-setTextRegs(struct VgaRegs *svp)
-{
-	int i;
-
-	/*
-	 *  saved settings
-	 */
-	while( svp->io_port != ENDMK ) {
-		outb(svp->io_port,   svp->io_index);
-		outb(svp->io_port+1, svp->io_value);
-		svp++;
-	}
-
-	outb(0x3c2, 0x67);  /* MISC */
-	outb(0x3c6, 0xff);  /* MASK */
-
-	for ( i = 0; i < 0x10; i++)
-		writeAttr(i, AC[i], 0);  /* palette */
-	writeAttr(0x10, 0x0c, 0);    /* text mode */
-	writeAttr(0x11, 0x00, 0);    /* overscan color (border) */
-	writeAttr(0x12, 0x0f, 0);    /* plane enable */
-	writeAttr(0x13, 0x08, 0);    /* pixel panning */
-	writeAttr(0x14, 0x00, 1);    /* color select; video on  */
-}
-
-void
-setTextCLUT(int shift)
-{
-	int i;
-
-	outb(0x3C6, 0xFF);
-	i = inb(0x3C7);
-	outb(0x3C8, 0);
-	i = inb(0x3C7);
-
-	for ( i = 0; i < 256; i++) {
-		outb(0x3C9, TextCLUT[i].r << shift);
-		outb(0x3C9, TextCLUT[i].g << shift);
-		outb(0x3C9, TextCLUT[i].b << shift);
-	}
-}
-
-void
-loadFont(unsigned char *ISA_mem)
-{
-	int i, j;
-	unsigned char *font_page = (unsigned char *) &ISA_mem[0xA0000];
-
-	outb(0x3C2, 0x67);
-	/*
-	 * Load font
-	 */
-	i = inb(0x3DA);  /* Reset Attr toggle */
-
-	outb(0x3C0,0x30);
-	outb(0x3C0, 0x01);      /* graphics mode */
-
-	outw(0x3C4, 0x0001);    /* reset sequencer */
-	outw(0x3C4, 0x0204);    /* write to plane 2 */
-	outw(0x3C4, 0x0406);    /* enable plane graphics */
-	outw(0x3C4, 0x0003);    /* reset sequencer */
-	outw(0x3CE, 0x0402);    /* read plane 2 */
-	outw(0x3CE, 0x0500);    /* write mode 0, read mode 0 */
-	outw(0x3CE, 0x0605);    /* set graphics mode */
-
-	for (i = 0;  i < sizeof(font);  i += 16) {
-		for (j = 0;  j < 16;  j++) {
-			__asm__ volatile("eieio");
-			font_page[(2*i)+j] = font[i+j];
-		}
-	}
-}
-
-static void
-unlockS3(void)
-{
-        int s3_device_id;
-	outw(0x3d4, 0x3848);
-	outw(0x3d4, 0x39a5);
-	outb(0x3d4, 0x2d);
-	s3_device_id = inb(0x3d5) << 8;
-	outb(0x3d4, 0x2e);
-	s3_device_id |= inb(0x3d5);
-
-	if (s3_device_id != 0x8812) {
-		/* From the S3 manual */
-		outb(0x46E8, 0x10);  /* Put into setup mode */
-		outb(0x3C3, 0x10);
-		outb(0x102, 0x01);   /* Enable registers */
-		outb(0x46E8, 0x08);  /* Enable video */
-		outb(0x3C3, 0x08);
-		outb(0x4AE8, 0x00);
-
-#if 0
-		outb(0x42E8, 0x80);  /* Reset graphics engine? */
-#endif
-
-		outb(0x3D4, 0x38);  /* Unlock all registers */
-		outb(0x3D5, 0x48);
-		outb(0x3D4, 0x39);
-		outb(0x3D5, 0xA5);
-		outb(0x3D4, 0x40);
-		outb(0x3D5, inb(0x3D5)|0x01);
-		outb(0x3D4, 0x33);
-		outb(0x3D5, inb(0x3D5)&~0x52);
-		outb(0x3D4, 0x35);
-		outb(0x3D5, inb(0x3D5)&~0x30);
-		outb(0x3D4, 0x3A);
-		outb(0x3D5, 0x00);
-		outb(0x3D4, 0x53);
-		outb(0x3D5, 0x00);
-		outb(0x3D4, 0x31);
-		outb(0x3D5, inb(0x3D5)&~0x4B);
-		outb(0x3D4, 0x58);
-
-		outb(0x3D5, 0);
-
-		outb(0x3D4, 0x54);
-		outb(0x3D5, 0x38);
-		outb(0x3D4, 0x60);
-		outb(0x3D5, 0x07);
-		outb(0x3D4, 0x61);
-		outb(0x3D5, 0x80);
-		outb(0x3D4, 0x62);
-		outb(0x3D5, 0xA1);
-		outb(0x3D4, 0x69);  /* High order bits for cursor address */
-		outb(0x3D5, 0);
-
-		outb(0x3D4, 0x32);
-		outb(0x3D5, inb(0x3D5)&~0x10);
-	} else {
-                outw(0x3c4, 0x0806);            /* IBM Portable 860 */
-                outw(0x3c4, 0x1041);
-                outw(0x3c4, 0x1128);
-                outw(0x3d4, 0x4000);
-                outw(0x3d4, 0x3100);
-                outw(0x3d4, 0x3a05);
-                outw(0x3d4, 0x6688);
-                outw(0x3d4, 0x5800);            /* disable linear addressing */
-                outw(0x3d4, 0x4500);            /* disable H/W cursor */
-                outw(0x3c4, 0x5410);            /* enable auto-centering */
-                outw(0x3c4, 0x561f);
-                outw(0x3c4, 0x1b80);            /* lock DCLK selection */
-                outw(0x3d4, 0x3900);            /* lock S3 registers */
-                outw(0x3d4, 0x3800);
-	} /* endif */
-}
-
-/*
- * cursor() sets an offset (0-1999) into the 80x25 text area.
- */
-void
-cursor(int x, int y)
-{
-	int pos = (y*cols)+x;
-	outb(0x3D4, 14);
-	outb(0x3D5, pos >> 8);
-	outb(0x3D4, 15);
-	outb(0x3D5, pos);
-}
-
-void
-clearVideoMemory(void)
-{
-	int i, j;
-	for (i = 0;  i < lines;  i++) {
-		for (j = 0;  j < cols;  j++) {
-			vidmem[((i*cols)+j)*2] = 0x20;	/* fill with space character */
-			vidmem[((i*cols)+j)*2+1] = 0x07;  /* set bg & fg attributes */
-		}
-	}
-}
-
-/* ============ */
-
-
-#define NSLOTS 8
-#define NPCIREGS  5
-
-
-/*
- should use devfunc number/indirect method to be totally safe on
- all machines, this works for now on 3 slot Moto boxes
-*/
-
-struct PCI_ConfigInfo {
-  unsigned long * config_addr;
-  unsigned long regs[NPCIREGS];
-} PCI_slots [NSLOTS] = {
-
-    { (unsigned long *)0x80808000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80800800, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80801000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80802000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80804000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80810000, {0xDEADBEEF,} },   /* slot A/1 */
-    { (unsigned long *)0x80820000, {0xDEADBEEF,} },   /* slot B/2 */
-    { (unsigned long *)0x80840000, {0xDEADBEEF,} }    /* slot C/3 */
-};
-
-
-
-/*
- * The following code modifies the PCI Command register
- * to enable memory and I/O accesses.
- */
-void
-unlockVideo(int slot)
-{
-       volatile unsigned char * ppci;
-
-        ppci =  (unsigned char * )PCI_slots[slot].config_addr;
-	ppci[4] = 0x0003;         /* enable memory and I/O accesses */
-	ppci[0x10] = 0x00000;     /* turn off memory mapping */
-	ppci[0x11] = 0x00000;     /* mem_base = 0 */
-	ppci[0x12] = 0x00000;
-	ppci[0x13] = 0x00000;
-	__asm__ volatile("eieio");
-
-	outb(0x3d4, 0x11);
-	outb(0x3d5, 0x0e);   /* unlock CR0-CR7 */
-}
-
-long
-SwapBytes(long lv)   /* turn little endian into big indian long */
-{
-    long t;
-    t  = (lv&0x000000FF) << 24;
-    t |= (lv&0x0000FF00) << 8;
-    t |= (lv&0x00FF0000) >> 8;
-    t |= (lv&0xFF000000) >> 24;
-    return(t);
-}
-
-
-#define DEVID   0
-#define CMD     1
-#define CLASS   2
-#define MEMBASE 4
-
-int
-scanPCI(int start_slt)
-{
-	int slt, r;
-	struct PCI_ConfigInfo *pslot;
-	int theSlot = -1;
-	int highVgaSlot = 0;
-
-	for ( slt = start_slt + 1; slt < NSLOTS; slt++) {
-		pslot = &PCI_slots[slt];
-		for ( r = 0; r < NPCIREGS; r++) {
-			pslot->regs[r] = SwapBytes ( pslot->config_addr[r] );
-		}
-		/* card in slot ? */
-		if ( pslot->regs[DEVID] != 0xFFFFFFFF ) {
-			/* VGA ? */
-			if ( ((pslot->regs[CLASS] & 0xFFFFFF00) == 0x03000000) ||
-			     ((pslot->regs[CLASS] & 0xFFFFFF00) == 0x00010000)) {
-				highVgaSlot = slt;
-				/* did firmware enable it ? */
-				if ( (pslot->regs[CMD] & 0x03) ) {
-					theSlot = slt;
-					break;
-				}
-			}
-		}
-	}
-
-	return ( theSlot );
-}
-
-/* return Vendor ID of card in the slot */
-static
-int PCIVendor(int slotnum) {
- struct PCI_ConfigInfo *pslot;
-
- pslot = &PCI_slots[slotnum];
-
-return (pslot->regs[DEVID] & 0xFFFF);
-}
-
-#ifdef DEBUG
-static
-void printslots(void)
-{
-	int i;
-#if 0
-	struct PCI_ConfigInfo *pslot;
-#endif
-	for(i=0; i < NSLOTS; i++) {
-#if 0
-		pslot = &PCI_slots[i];
-		printf("Slot: %d, Addr: %x, Vendor: %08x, Class: %08x\n",
-		       i, pslot->config_addr, pslot->regs[0], pslot->regs[2]);
-#else
-		puts("PCI Slot number: "); puthex(i);
-		puts(" Vendor ID: ");
-		puthex(PCIVendor(i)); puts("\n");
-#endif
-	}
-}
-#endif /* DEBUG */
diff --git a/arch/ppc/boot/of1275/Makefile b/arch/ppc/boot/of1275/Makefile
deleted file mode 100644
index 0b979c004972..000000000000
--- a/arch/ppc/boot/of1275/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile of1275 stuff
-#
-
-lib-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o	\
-	 ofstdio.o read.o release.o write.o map.o call_prom.o
diff --git a/arch/ppc/boot/of1275/call_prom.c b/arch/ppc/boot/of1275/call_prom.c
deleted file mode 100644
index 9479a3a2b8c7..000000000000
--- a/arch/ppc/boot/of1275/call_prom.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-#include <stdarg.h>
-
-int call_prom(const char *service, int nargs, int nret, ...)
-{
-	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
-	va_list list;
-
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
-
-	va_start(list, nret);
-	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
-	va_end(list);
-
-	for (i = 0; i < nret; i++)
-		args.args[nargs+i] = 0;
-
-	if (of_prom_entry(&args) < 0)
-		return -1;
-
-	return (nret > 0)? args.args[nargs]: 0;
-}
-
-int call_prom_ret(const char *service, int nargs, int nret,
-		  unsigned int *rets, ...)
-{
-	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
-	va_list list;
-
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
-
-	va_start(list, rets);
-	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
-	va_end(list);
-
-	for (i = 0; i < nret; i++)
-		args.args[nargs+i] = 0;
-
-	if (of_prom_entry(&args) < 0)
-		return -1;
-
-	if (rets != (void *) 0)
-		for (i = 1; i < nret; ++i)
-			rets[i-1] = args.args[nargs+i];
-
-	return (nret > 0)? args.args[nargs]: 0;
-}
diff --git a/arch/ppc/boot/of1275/claim.c b/arch/ppc/boot/of1275/claim.c
deleted file mode 100644
index 1ed3aeeff8ae..000000000000
--- a/arch/ppc/boot/of1275/claim.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-#include "nonstdio.h"
-
-/*
- * Older OF's require that when claiming a specific range of addresses,
- * we claim the physical space in the /memory node and the virtual
- * space in the chosen mmu node, and then do a map operation to
- * map virtual to physical.
- */
-static int need_map = -1;
-static ihandle chosen_mmu;
-static phandle memory;
-
-/* returns true if s2 is a prefix of s1 */
-static int string_match(const char *s1, const char *s2)
-{
-	for (; *s2; ++s2)
-		if (*s1++ != *s2)
-			return 0;
-	return 1;
-}
-
-static int check_of_version(void)
-{
-	phandle oprom, chosen;
-	char version[64];
-
-	oprom = finddevice("/openprom");
-	if (oprom == OF_INVALID_HANDLE)
-		return 0;
-	if (getprop(oprom, "model", version, sizeof(version)) <= 0)
-		return 0;
-	version[sizeof(version)-1] = 0;
-	printf("OF version = '%s'\n", version);
-	if (!string_match(version, "Open Firmware, 1.")
-	    && !string_match(version, "FirmWorks,3."))
-		return 0;
-	chosen = finddevice("/chosen");
-	if (chosen == OF_INVALID_HANDLE) {
-		chosen = finddevice("/chosen@0");
-		if (chosen == OF_INVALID_HANDLE) {
-			printf("no chosen\n");
-			return 0;
-		}
-	}
-	if (getprop(chosen, "mmu", &chosen_mmu, sizeof(chosen_mmu)) <= 0) {
-		printf("no mmu\n");
-		return 0;
-	}
-	memory = (ihandle) call_prom("open", 1, 1, "/memory");
-	if (memory == OF_INVALID_HANDLE) {
-		memory = (ihandle) call_prom("open", 1, 1, "/memory@0");
-		if (memory == OF_INVALID_HANDLE) {
-			printf("no memory node\n");
-			return 0;
-		}
-	}
-	printf("old OF detected\n");
-	return 1;
-}
-
-void *claim(unsigned int virt, unsigned int size, unsigned int align)
-{
-	int ret;
-	unsigned int result;
-
-	if (need_map < 0)
-		need_map = check_of_version();
-	if (align || !need_map)
-		return (void *) call_prom("claim", 3, 1, virt, size, align);
-	
-	ret = call_prom_ret("call-method", 5, 2, &result, "claim", memory,
-			    align, size, virt);
-	if (ret != 0 || result == -1)
-		return (void *) -1;
-	ret = call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu,
-			    align, size, virt);
-	/* 0x12 == coherent + read/write */
-	ret = call_prom("call-method", 6, 1, "map", chosen_mmu,
-			0x12, size, virt, virt);
-	return virt;
-}
diff --git a/arch/ppc/boot/of1275/enter.c b/arch/ppc/boot/of1275/enter.c
deleted file mode 100644
index abe87a8fe2db..000000000000
--- a/arch/ppc/boot/of1275/enter.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-void
-enter(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    args.service = "enter";
-    (*of_prom_entry)(&args);
-}
diff --git a/arch/ppc/boot/of1275/exit.c b/arch/ppc/boot/of1275/exit.c
deleted file mode 100644
index b9f89b6a8b45..000000000000
--- a/arch/ppc/boot/of1275/exit.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-void
-exit(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    for (;;) {
-	args.service = "exit";
-	(*of_prom_entry)(&args);
-    }
-}
diff --git a/arch/ppc/boot/of1275/finddevice.c b/arch/ppc/boot/of1275/finddevice.c
deleted file mode 100644
index 0dcb1201b772..000000000000
--- a/arch/ppc/boot/of1275/finddevice.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-phandle finddevice(const char *name)
-{
-	return (phandle) call_prom("finddevice", 1, 1, name);
-}
diff --git a/arch/ppc/boot/of1275/getprop.c b/arch/ppc/boot/of1275/getprop.c
deleted file mode 100644
index 0cf75f035e4e..000000000000
--- a/arch/ppc/boot/of1275/getprop.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-getprop(phandle node, const char *name, void *buf, int buflen)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	phandle node;
-	const char *name;
-	void *buf;
-	int buflen;
-	int size;
-    } args;
-
-    args.service = "getprop";
-    args.nargs = 4;
-    args.nret = 1;
-    args.node = node;
-    args.name = name;
-    args.buf = buf;
-    args.buflen = buflen;
-    args.size = -1;
-    (*of_prom_entry)(&args);
-    return args.size;
-}
diff --git a/arch/ppc/boot/of1275/map.c b/arch/ppc/boot/of1275/map.c
deleted file mode 100644
index 443256c6f6d6..000000000000
--- a/arch/ppc/boot/of1275/map.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-#include "nonstdio.h"
-
-extern ihandle of_prom_mmu;
-
-int
-map(unsigned int phys, unsigned int virt, unsigned int size)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	char *method;
-	ihandle mmu_ihandle;
-	int misc;
-	unsigned int size;
-	unsigned int virt;
-	unsigned int phys;
-	int ret0;
-    } args;
-
-    if (of_prom_mmu == 0) {
-    	printf("map() called, no MMU found\n");
-    	return -1;
-    }
-    args.service = "call-method";
-    args.nargs = 6;
-    args.nret = 1;
-    args.method = "map";
-    args.mmu_ihandle = of_prom_mmu;
-    args.misc = 0;
-    args.phys = phys;
-    args.virt = virt;
-    args.size = size;
-    (*of_prom_entry)(&args);
-
-    return (int)args.ret0;
-}
diff --git a/arch/ppc/boot/of1275/ofinit.c b/arch/ppc/boot/of1275/ofinit.c
deleted file mode 100644
index 0ee8af7639e9..000000000000
--- a/arch/ppc/boot/of1275/ofinit.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-prom_entry of_prom_entry;
-ihandle of_prom_mmu;
-
-void
-ofinit(prom_entry prom_ptr)
-{
-    phandle chosen;
-
-    of_prom_entry = prom_ptr;
-
-    if ((chosen = finddevice("/chosen")) == OF_INVALID_HANDLE)
-	return;
-    if (getprop(chosen, "mmu", &of_prom_mmu, sizeof(ihandle)) != 4)
-	return;
-}
diff --git a/arch/ppc/boot/of1275/ofstdio.c b/arch/ppc/boot/of1275/ofstdio.c
deleted file mode 100644
index 10abbe32b31f..000000000000
--- a/arch/ppc/boot/of1275/ofstdio.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr)
-{
-    ihandle in, out;
-    phandle chosen;
-
-    if ((chosen = finddevice("/chosen")) == OF_INVALID_HANDLE)
-	goto err;
-    if (getprop(chosen, "stdout", &out, sizeof(out)) != 4)
-	goto err;
-    if (getprop(chosen, "stdin", &in, sizeof(in)) != 4)
-	goto err;
-
-    *stdin  = in;
-    *stdout = out;
-    *stderr = out;
-    return 0;
-err:
-    return -1;
-}
diff --git a/arch/ppc/boot/of1275/read.c b/arch/ppc/boot/of1275/read.c
deleted file mode 100644
index 122813649fce..000000000000
--- a/arch/ppc/boot/of1275/read.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-read(ihandle instance, void *buf, int buflen)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	ihandle instance;
-	void *buf;
-	int buflen;
-	int actual;
-    } args;
-
-    args.service = "read";
-    args.nargs = 3;
-    args.nret = 1;
-    args.instance = instance;
-    args.buf = buf;
-    args.buflen = buflen;
-    args.actual = -1;
-    (*of_prom_entry)(&args);
-    return args.actual;
-}
diff --git a/arch/ppc/boot/of1275/release.c b/arch/ppc/boot/of1275/release.c
deleted file mode 100644
index 28032d37145d..000000000000
--- a/arch/ppc/boot/of1275/release.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-void
-release(void *virt, unsigned int size)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	void *virt;
-	unsigned int size;
-    } args;
-
-    args.service = "release";
-    args.nargs = 2;
-    args.nret = 0;
-    args.virt = virt;
-    args.size = size;
-    (*of_prom_entry)(&args);
-}
diff --git a/arch/ppc/boot/of1275/write.c b/arch/ppc/boot/of1275/write.c
deleted file mode 100644
index 7361b9b2fca5..000000000000
--- a/arch/ppc/boot/of1275/write.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-write(ihandle instance, void *buf, int buflen)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	ihandle instance;
-	void *buf;
-	int buflen;
-	int actual;
-    } args;
-
-    args.service = "write";
-    args.nargs = 3;
-    args.nret = 1;
-    args.instance = instance;
-    args.buf = buf;
-    args.buflen = buflen;
-    args.actual = -1;
-    (*of_prom_entry)(&args);
-    return args.actual;
-}
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
deleted file mode 100644
index 5b877792d14f..000000000000
--- a/arch/ppc/boot/simple/Makefile
+++ /dev/null
@@ -1,277 +0,0 @@
-# This is far from simple, but I couldn't think of a good name.  This is
-# for making the 'zImage' or 'zImage.initrd' on a number of targets.
-#
-# Author: Tom Rini <trini@mvista.com>
-#
-# Notes:
-# (1) For machines that do not want to use the ELF image directly (including
-# stripping just the ELF header off), they must set the variables
-# zimage-$(CONFIG_MACHINE) and zimagerd-$(CONFIG_MACHINE) to the target
-# that produces the desired image and they must set end-$(CONFIG_MACHINE)
-# to what will be suffixed to the image filename.
-# (2) Regardless of (1), to have the resulting image be something other
-# than 'zImage.elf', set end-$(CONFIG_MACHINE) to be the suffix used for
-# the zImage, znetboot, and znetbootrd targets.
-# (3) For machine targets which use the mktree program, you can optionally
-# set entrypoint-$(CONFIG_MACHINE) to the location which the image should be
-# loaded at.  The optimal setting for entrypoint-$(CONFIG_MACHINE) is the link
-# address.
-# (4) It is advisable to pass in the memory size using BI_MEMSIZE and
-# get_mem_size(), which is memory controller dependent.  Add in the correct
-# XXX_memory.o file for this to work, as well as editing the
-# misc-$(CONFIG_MACHINE) variable.
-
-boot				:= arch/ppc/boot
-common				:= $(boot)/common
-utils				:= $(boot)/utils
-bootlib				:= $(boot)/lib
-images				:= $(boot)/images
-of1275				:= $(boot)/of1275
-tftpboot			:= /tftpboot
-
-# Normally, we use the 'misc.c' file for decompress_kernel and
-# whatnot.  Sometimes we need to override this however.
-misc-y	:= misc.o
-
-# Normally, we have our images end in .elf, but something we want to
-# change this.
-end-y := elf
-
-# Additionally, we normally don't need to mess with the L2 / L3 caches
-# if present on 'classic' PPC.
-cacheflag-y	:= -DCLEAR_CACHES=""
-# This file will flush / disable the L2, and L3 if present.
-clear_L2_L3	:= $(srctree)/$(boot)/simple/clear.S
-
-#
-# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig
-# for definition of what platform each config option refer to.
-#----------------------------------------------------------------------------
-      zimage-$(CONFIG_CPCI690)		:= zImage-STRIPELF
-zimageinitrd-$(CONFIG_CPCI690)		:= zImage.initrd-STRIPELF
-     extra.o-$(CONFIG_CPCI690)		:= misc-cpci690.o
-         end-$(CONFIG_CPCI690)		:= cpci690
-   cacheflag-$(CONFIG_CPCI690)		:= -include $(clear_L2_L3)
-
-      zimage-$(CONFIG_IBM_OPENBIOS)	:= zImage-TREE
-zimageinitrd-$(CONFIG_IBM_OPENBIOS)	:= zImage.initrd-TREE
-         end-$(CONFIG_IBM_OPENBIOS)	:= treeboot
-        misc-$(CONFIG_IBM_OPENBIOS)	:= misc-embedded.o
-
-         end-$(CONFIG_EMBEDDEDBOOT)	:= embedded
-        misc-$(CONFIG_EMBEDDEDBOOT)	:= misc-embedded.o
-
-      zimage-$(CONFIG_BAMBOO)		:= zImage-TREE
-zimageinitrd-$(CONFIG_BAMBOO)		:= zImage.initrd-TREE
-         end-$(CONFIG_BAMBOO)		:= bamboo
-  entrypoint-$(CONFIG_BAMBOO)		:= 0x01000000
-     extra.o-$(CONFIG_BAMBOO)		:= pibs.o
-
-      zimage-$(CONFIG_BUBINGA)		:= zImage-TREE
-zimageinitrd-$(CONFIG_BUBINGA)		:= zImage.initrd-TREE
-         end-$(CONFIG_BUBINGA)		:= bubinga
-  entrypoint-$(CONFIG_BUBINGA)		:= 0x01000000
-     extra.o-$(CONFIG_BUBINGA)		:= openbios.o
-
-      zimage-$(CONFIG_EBONY)		:= zImage-TREE
-zimageinitrd-$(CONFIG_EBONY)		:= zImage.initrd-TREE
-         end-$(CONFIG_EBONY)		:= ebony
-  entrypoint-$(CONFIG_EBONY)		:= 0x01000000
-     extra.o-$(CONFIG_EBONY)		:= openbios.o
-
-      zimage-$(CONFIG_LUAN)		:= zImage-TREE
-zimageinitrd-$(CONFIG_LUAN)		:= zImage.initrd-TREE
-         end-$(CONFIG_LUAN)		:= luan
-  entrypoint-$(CONFIG_LUAN)		:= 0x01000000
-     extra.o-$(CONFIG_LUAN)		:= pibs.o
-
-      zimage-$(CONFIG_YUCCA)		:= zImage-TREE
-zimageinitrd-$(CONFIG_YUCCA)		:= zImage.initrd-TREE
-         end-$(CONFIG_YUCCA)		:= yucca
-  entrypoint-$(CONFIG_YUCCA)		:= 0x01000000
-     extra.o-$(CONFIG_YUCCA)		:= pibs.o
-
-      zimage-$(CONFIG_OCOTEA)		:= zImage-TREE
-zimageinitrd-$(CONFIG_OCOTEA)		:= zImage.initrd-TREE
-         end-$(CONFIG_OCOTEA)		:= ocotea
-  entrypoint-$(CONFIG_OCOTEA)		:= 0x01000000
-     extra.o-$(CONFIG_OCOTEA)		:= pibs.o
-
-      zimage-$(CONFIG_SYCAMORE)		:= zImage-TREE
-zimageinitrd-$(CONFIG_SYCAMORE)		:= zImage.initrd-TREE
-         end-$(CONFIG_SYCAMORE)		:= sycamore
-  entrypoint-$(CONFIG_SYCAMORE)		:= 0x01000000
-     extra.o-$(CONFIG_SYCAMORE)		:= openbios.o
-
-      zimage-$(CONFIG_WALNUT)		:= zImage-TREE
-zimageinitrd-$(CONFIG_WALNUT)		:= zImage.initrd-TREE
-         end-$(CONFIG_WALNUT)		:= walnut
-  entrypoint-$(CONFIG_WALNUT)		:= 0x01000000
-     extra.o-$(CONFIG_WALNUT)		:= openbios.o
-
-     extra.o-$(CONFIG_EV64260)		:= misc-ev64260.o
-         end-$(CONFIG_EV64260)		:= ev64260
-   cacheflag-$(CONFIG_EV64260)		:= -include $(clear_L2_L3)
-
-     extra.o-$(CONFIG_CHESTNUT)		:= misc-chestnut.o
-         end-$(CONFIG_CHESTNUT)		:= chestnut
-
-     extra.o-$(CONFIG_KATANA)		:= misc-katana.o
-         end-$(CONFIG_KATANA)		:= katana
-   cacheflag-$(CONFIG_KATANA)		:= -include $(clear_L2_L3)
-
-     extra.o-$(CONFIG_RADSTONE_PPC7D)	:= misc-radstone_ppc7d.o
-         end-$(CONFIG_RADSTONE_PPC7D)	:= radstone_ppc7d
-   cacheflag-$(CONFIG_RADSTONE_PPC7D)	:= -include $(clear_L2_L3)
-
-     extra.o-$(CONFIG_EV64360)          := misc-ev64360.o
-         end-$(CONFIG_EV64360)          := ev64360
-   cacheflag-$(CONFIG_EV64360)          := -include $(clear_L2_L3)
-
-# kconfig 'feature', only one of these will ever be 'y' at a time.
-# The rest will be unset.
-motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
-$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS)
-motorola := $(strip $(motorola))
-
-      zimage-$(motorola)		:= zImage-PPLUS
-zimageinitrd-$(motorola)		:= zImage.initrd-PPLUS
-         end-$(motorola)		:= pplus
-
-# Overrides previous assingment
-     extra.o-$(CONFIG_PPLUS)		:= prepmap.o
-     extra.o-$(CONFIG_LOPEC)		:= mpc10x_memory.o
-
-# Really only valid if CONFIG_6xx=y
-      zimage-$(CONFIG_PPC_PREP)		:= zImage-PPLUS
-zimageinitrd-$(CONFIG_PPC_PREP)		:= zImage.initrd-PPLUS
-ifeq ($(CONFIG_6xx),y)
-     extra.o-$(CONFIG_PPC_PREP)		:= prepmap.o
-        misc-$(CONFIG_PPC_PREP)		+= misc-prep.o mpc10x_memory.o
-endif
-         end-$(CONFIG_PPC_PREP)		:= prep
-
-         end-$(CONFIG_SANDPOINT)	:= sandpoint
-   cacheflag-$(CONFIG_SANDPOINT)	:= -include $(clear_L2_L3)
-
-      zimage-$(CONFIG_SPRUCE)		:= zImage-TREE
-zimageinitrd-$(CONFIG_SPRUCE)		:= zImage.initrd-TREE
-         end-$(CONFIG_SPRUCE)		:= spruce
-  entrypoint-$(CONFIG_SPRUCE)		:= 0x00800000
-        misc-$(CONFIG_SPRUCE)		+= misc-spruce.o
-
-      zimage-$(CONFIG_LITE5200)		:= zImage-STRIPELF
-zimageinitrd-$(CONFIG_LITE5200)		:= zImage.initrd-STRIPELF
-         end-$(CONFIG_LITE5200)		:= lite5200
-   cacheflag-$(CONFIG_LITE5200)		:= -include $(clear_L2_L3)
-
-
-# SMP images should have a '.smp' suffix.
-         end-$(CONFIG_SMP)             := $(end-y).smp
-
-# This is a treeboot that needs init functions until the
-# boot rom is sorted out (i.e. this is short lived)
-EXTRA_AFLAGS := $(extra-aflags-y)
-# head.o needs to get the cacheflags defined.
-AFLAGS_head.o				+= $(cacheflag-y)
-
-# Linker args.  This specifies where the image will be run at.
-LD_ARGS					:= -T $(srctree)/$(boot)/ld.script \
-				   -Ttext $(CONFIG_BOOT_LOAD) -Bstatic
-OBJCOPY_ARGS			:= -O elf32-powerpc
-
-# head.o and relocate.o must be at the start.
-boot-y				:= head.o relocate.o $(extra.o-y) $(misc-y)
-boot-$(CONFIG_REDWOOD_5)	+= embed_config.o
-boot-$(CONFIG_REDWOOD_6)	+= embed_config.o
-boot-$(CONFIG_8xx)		+= embed_config.o
-boot-$(CONFIG_8260)		+= embed_config.o
-boot-$(CONFIG_EP405)		+= embed_config.o
-boot-$(CONFIG_XILINX_ML300)	+= embed_config.o
-boot-$(CONFIG_XILINX_ML403)	+= embed_config.o
-boot-$(CONFIG_BSEIP)		+= iic.o
-boot-$(CONFIG_MBX)		+= iic.o pci.o qspan_pci.o
-boot-$(CONFIG_MV64X60)		+= misc-mv64x60.o
-boot-$(CONFIG_RPXCLASSIC)	+= iic.o pci.o qspan_pci.o
-boot-$(CONFIG_RPXLITE)		+= iic.o
-# Different boards need different serial implementations.
-ifeq ($(CONFIG_SERIAL_CPM_CONSOLE),y)
-boot-$(CONFIG_8xx)		+= m8xx_tty.o
-boot-$(CONFIG_8260)		+= m8260_tty.o
-endif
-boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE)	+= mpc52xx_tty.o
-boot-$(CONFIG_SERIAL_MPSC_CONSOLE)	+= mv64x60_tty.o
-boot-$(CONFIG_SERIAL_UARTLITE_CONSOLE)	+= uartlite_tty.o
-
-LIBS				:= $(common)/lib.a $(bootlib)/lib.a
-ifeq ($(CONFIG_PPC_PREP),y)
-LIBS 				+= $(of1275)/lib.a
-endif
-
-OBJS				:= $(addprefix $(obj)/,$(boot-y))
-
-# Tools
-MKBUGBOOT			:= $(utils)/mkbugboot
-MKPREP				:= $(utils)/mkprep
-MKTREE				:= $(utils)/mktree
-
-targets := dummy.o
-
-$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
-		$(images)/vmlinux.gz $(obj)/dummy.o
-	$(OBJCOPY) $(OBJCOPY_ARGS) \
-		--add-section=.image=$(images)/vmlinux.gz \
-		--set-section-flags=.image=contents,alloc,load,readonly,data \
-		$(obj)/dummy.o $(obj)/image.o
-	$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
-	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
-		-R .stabstr -R .ramdisk
-
-$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
-		$(images)/vmlinux.gz $(obj)/dummy.o
-	$(OBJCOPY) $(OBJCOPY_ARGS) \
-		--add-section=.ramdisk=$(images)/ramdisk.image.gz \
-		--set-section-flags=.ramdisk=contents,alloc,load,readonly,data \
-		--add-section=.image=$(images)/vmlinux.gz \
-		--set-section-flags=.image=contents,alloc,load,readonly,data \
-		$(obj)/dummy.o $(obj)/image.o
-	$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
-	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
-		-R .stabstr
-
-# Sort-of dummy rules, that let us format the image we want.
-zImage: $(images)/$(zimage-y) $(obj)/zvmlinux
-	cp -f $(obj)/zvmlinux $(images)/zImage.elf
-	rm -f $(obj)/zvmlinux
-
-zImage.initrd: $(images)/$(zimageinitrd-y) $(obj)/zvmlinux.initrd
-	cp -f $(obj)/zvmlinux.initrd $(images)/zImage.initrd.elf
-	rm -f $(obj)/zvmlinux.initrd
-
-znetboot: zImage
-	cp $(images)/zImage.$(end-y) $(tftpboot)/zImage.$(end-y)
-
-znetboot.initrd: zImage.initrd
-	cp $(images)/zImage.initrd.$(end-y) $(tftpboot)/zImage.initrd.$(end-y)
-
-$(images)/zImage-STRIPELF: $(obj)/zvmlinux
-	dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k
-
-$(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd
-	dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(end-y) \
-		skip=64 bs=1k
-
-$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE)
-	$(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(entrypoint-y)
-
-$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE)
-	$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \
-		$(entrypoint-y)
-
-$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT)
-	$(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y)
-	$(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot
-
-$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT)
-	$(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y)
-	$(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot
diff --git a/arch/ppc/boot/simple/chrpmap.c b/arch/ppc/boot/simple/chrpmap.c
deleted file mode 100644
index 14d9e05d98bb..000000000000
--- a/arch/ppc/boot/simple/chrpmap.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * 2004 (C) IBM. This file is licensed under the terms of the GNU General
- * Public License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <nonstdio.h>
-
-void board_isa_init(void)
-{
-	ISA_init(0xFE000000);
-}
diff --git a/arch/ppc/boot/simple/clear.S b/arch/ppc/boot/simple/clear.S
deleted file mode 100644
index 95c5647a0f51..000000000000
--- a/arch/ppc/boot/simple/clear.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Code to call _setup_L2CR to flus, invalidate and disable the L2,
- * and if present, do the same to the L3.
- */
-
-#define CLEAR_CACHES						\
-	bl	_setup_L2CR;					\
-								\
-	/* If 745x, turn off L3CR as well */			\
-	mfspr	r8,SPRN_PVR;					\
-	srwi	r8,r8,16;					\
-								\
-	cmpli	cr0,r8,0x8000;			/* 7450 */	\
-	cmpli	cr1,r8,0x8001;			/* 7455 */	\
-	cmpli	cr2,r8,0x8002;			/* 7457 */	\
-	/* Now test if any are true. */				\
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq;			\
-	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq;			\
-	beql	_setup_L3CR
diff --git a/arch/ppc/boot/simple/cpc700_memory.c b/arch/ppc/boot/simple/cpc700_memory.c
deleted file mode 100644
index d75420a45a59..000000000000
--- a/arch/ppc/boot/simple/cpc700_memory.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Find memory based upon settings in the CPC700 bridge
- *
- * Author: Dan Cox
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include "cpc700.h"
-
-unsigned long
-cpc700_get_mem_size(void)
-{
-	int i;
-	unsigned long len, amt;
-
-	/* Start at MB1EA, since MB0EA will most likely be the ending address
-	   for ROM space. */
-	for(len = 0, i = CPC700_MB1EA; i <= CPC700_MB4EA; i+=4) {
-		amt = cpc700_read_memreg(i);
-		if (amt == 0)
-			break;
-		len = amt;
-	}
-
-	return len;
-}
-
-
diff --git a/arch/ppc/boot/simple/dummy.c b/arch/ppc/boot/simple/dummy.c
deleted file mode 100644
index 31dbf45bf99c..000000000000
--- a/arch/ppc/boot/simple/dummy.c
+++ /dev/null
@@ -1,4 +0,0 @@
-int main(void)
-{
-	return 0;
-}
diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c
deleted file mode 100644
index 3b46792d7b8b..000000000000
--- a/arch/ppc/boot/simple/embed_config.c
+++ /dev/null
@@ -1,938 +0,0 @@
-/* Board specific functions for those embedded 8xx boards that do
- * not have boot monitor support for board information.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/reg.h>
-#ifdef CONFIG_8xx
-#include <asm/mpc8xx.h>
-#endif
-#ifdef CONFIG_8260
-#include <asm/mpc8260.h>
-#include <asm/immap_cpm2.h>
-#endif
-#ifdef CONFIG_40x
-#include <asm/io.h>
-#endif
-#ifdef CONFIG_XILINX_VIRTEX
-#include <platforms/4xx/xparameters/xparameters.h>
-#endif
-extern unsigned long timebase_period_ns;
-
-/* For those boards that don't provide one.
-*/
-#if !defined(CONFIG_MBX)
-static	bd_t	bdinfo;
-#endif
-
-/* IIC functions.
- * These are just the basic master read/write operations so we can
- * examine serial EEPROM.
- */
-extern void	iic_read(uint devaddr, u_char *buf, uint offset, uint count);
-
-/* Supply a default Ethernet address for those eval boards that don't
- * ship with one.  This is an address from the MBX board I have, so
- * it is unlikely you will find it on your network.
- */
-static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
-
-#if defined(CONFIG_MBX)
-
-/* The MBX hands us a pretty much ready to go board descriptor.  This
- * is where the idea started in the first place.
- */
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*mp;
-	u_char	eebuf[128];
-	int i = 8;
-	bd_t    *bd;
-
-	bd = *bdp;
-
-	/* Read the first 128 bytes of the EEPROM.  There is more,
-	 * but this is all we need.
-	 */
-	iic_read(0xa4, eebuf, 0, 128);
-
-	/* All we are looking for is the Ethernet MAC address.  The
-	 * first 8 bytes are 'MOTOROLA', so check for part of that.
-	 * Next, the VPD describes a MAC 'packet' as being of type 08
-	 * and size 06.  So we look for that and the MAC must follow.
-	 * If there are more than one, we still only care about the first.
-	 * If it's there, assume we have a valid MAC address.  If not,
-	 * grab our default one.
-	 */
-	if ((*(uint *)eebuf) == 0x4d4f544f) {
-		while (i < 127 && !(eebuf[i] == 0x08 && eebuf[i + 1] == 0x06))
-			 i += eebuf[i + 1] + 2;  /* skip this packet */
-
-		if (i == 127)	/* Couldn't find. */
-			mp = (u_char *)def_enet_addr;
-		else
-			mp = &eebuf[i + 2];
-	}
-	else
-		mp = (u_char *)def_enet_addr;
-
-	for (i=0; i<6; i++)
-		bd->bi_enetaddr[i] = *mp++;
-
-	/* The boot rom passes these to us in MHz.  Linux now expects
-	 * them to be in Hz.
-	 */
-	bd->bi_intfreq *= 1000000;
-	bd->bi_busfreq *= 1000000;
-
-	/* Stuff a baud rate here as well.
-	*/
-	bd->bi_baudrate = 9600;
-}
-#endif /* CONFIG_MBX */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || \
-	defined(CONFIG_RPX8260) || defined(CONFIG_EP405)
-/* Helper functions for Embedded Planet boards.
-*/
-/* Because I didn't find anything that would do this.......
-*/
-u_char
-aschex_to_byte(u_char *cp)
-{
-	u_char	byte, c;
-
-	c = *cp++;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else
-		c -= '0';
-
-	byte = c * 16;
-
-	c = *cp;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else
-		c -= '0';
-
-	byte += c;
-
-	return(byte);
-}
-
-static void
-rpx_eth(bd_t *bd, u_char *cp)
-{
-	int	i;
-
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = aschex_to_byte(cp);
-		cp += 2;
-	}
-}
-
-#ifdef CONFIG_RPX8260
-static uint
-rpx_baseten(u_char *cp)
-{
-	uint	retval;
-
-	retval = 0;
-
-	while (*cp != '\n') {
-		retval *= 10;
-		retval += (*cp) - '0';
-		cp++;
-	}
-	return(retval);
-}
-#endif
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-static void
-rpx_brate(bd_t *bd, u_char *cp)
-{
-	uint	rate;
-
-	rate = 0;
-
-	while (*cp != '\n') {
-		rate *= 10;
-		rate += (*cp) - '0';
-		cp++;
-	}
-
-	bd->bi_baudrate = rate * 100;
-}
-
-static void
-rpx_cpuspeed(bd_t *bd, u_char *cp)
-{
-	uint	num, den;
-
-	num = den = 0;
-
-	while (*cp != '\n') {
-		num *= 10;
-		num += (*cp) - '0';
-		cp++;
-		if (*cp == '/') {
-			cp++;
-			den = (*cp) - '0';
-			break;
-		}
-	}
-
-	/* I don't know why the RPX just can't state the actual
-	 * CPU speed.....
-	 */
-	if (den) {
-		num /= den;
-		num *= den;
-	}
-	bd->bi_intfreq = bd->bi_busfreq = num * 1000000;
-
-	/* The 8xx can only run a maximum 50 MHz bus speed (until
-	 * Motorola changes this :-).  Greater than 50 MHz parts
-	 * run internal/2 for bus speed.
-	 */
-	if (num > 50)
-		bd->bi_busfreq /= 2;
-}
-#endif
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_EP405)
-static void
-rpx_memsize(bd_t *bd, u_char *cp)
-{
-	uint	size;
-
-	size = 0;
-
-	while (*cp != '\n') {
-		size *= 10;
-		size += (*cp) - '0';
-		cp++;
-	}
-
-	bd->bi_memsize = size * 1024 * 1024;
-}
-#endif /* LITE || CLASSIC || EP405 */
-#if defined(CONFIG_EP405)
-static void
-rpx_nvramsize(bd_t *bd, u_char *cp)
-{
-	uint	size;
-
-	size = 0;
-
-	while (*cp != '\n') {
-		size *= 10;
-		size += (*cp) - '0';
-		cp++;
-	}
-
-	bd->bi_nvramsize = size * 1024;
-}
-#endif /* CONFIG_EP405 */
-
-#endif	/* Embedded Planet boards */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-
-/* Read the EEPROM on the RPX-Lite board.
-*/
-void
-embed_config(bd_t **bdp)
-{
-	u_char	eebuf[256], *cp;
-	bd_t	*bd;
-
-	/* Read the first 256 bytes of the EEPROM.  I think this
-	 * is really all there is, and I hope if it gets bigger the
-	 * info we want is still up front.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-
-#if 1
-	iic_read(0xa8, eebuf, 0, 128);
-	iic_read(0xa8, &eebuf[128], 128, 128);
-
-	/* We look for two things, the Ethernet address and the
-	 * serial baud rate.  The records are separated by
-	 * newlines.
-	 */
-	cp = eebuf;
-	for (;;) {
-		if (*cp == 'E') {
-			cp++;
-			if (*cp == 'A') {
-				cp += 2;
-				rpx_eth(bd, cp);
-			}
-		}
-		if (*cp == 'S') {
-			cp++;
-			if (*cp == 'B') {
-				cp += 2;
-				rpx_brate(bd, cp);
-			}
-		}
-		if (*cp == 'D') {
-			cp++;
-			if (*cp == '1') {
-				cp += 2;
-				rpx_memsize(bd, cp);
-			}
-		}
-		if (*cp == 'H') {
-			cp++;
-			if (*cp == 'Z') {
-				cp += 2;
-				rpx_cpuspeed(bd, cp);
-			}
-		}
-
-		/* Scan to the end of the record.
-		*/
-		while ((*cp != '\n') && (*cp != 0xff))
-			cp++;
-
-		/* If the next character is a 0 or ff, we are done.
-		*/
-		cp++;
-		if ((*cp == 0) || (*cp == 0xff))
-			break;
-	}
-	bd->bi_memstart = 0;
-#else
-	/* For boards without initialized EEPROM.
-	*/
-	bd->bi_memstart = 0;
-	bd->bi_memsize = (8 * 1024 * 1024);
-	bd->bi_intfreq = 48000000;
-	bd->bi_busfreq = 48000000;
-	bd->bi_baudrate = 9600;
-#endif
-}
-#endif /* RPXLITE || RPXCLASSIC */
-
-#ifdef CONFIG_BSEIP
-/* Build a board information structure for the BSE ip-Engine.
- * There is more to come since we will add some environment
- * variables and a function to read them.
- */
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	bd = &bdinfo;
-	*bdp = bd;
-
-	/* Baud rate and processor speed will eventually come
-	 * from the environment variables.
-	 */
-	bd->bi_baudrate = 9600;
-
-	/* Get the Ethernet station address from the Flash ROM.
-	*/
-	cp = (u_char *)0xfe003ffa;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-
-	/* The rest of this should come from the environment as well.
-	*/
-	bd->bi_memstart = 0;
-	bd->bi_memsize = (16 * 1024 * 1024);
-	bd->bi_intfreq = 48000000;
-	bd->bi_busfreq = 48000000;
-}
-#endif /* BSEIP */
-
-#ifdef CONFIG_FADS
-/* Build a board information structure for the FADS.
- */
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	bd = &bdinfo;
-	*bdp = bd;
-
-	/* Just fill in some known values.
-	 */
-	bd->bi_baudrate = 9600;
-
-	/* Use default enet.
-	*/
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-
-	bd->bi_memstart = 0;
-	bd->bi_memsize = (8 * 1024 * 1024);
-	bd->bi_intfreq = 40000000;
-	bd->bi_busfreq = 40000000;
-}
-#endif /* FADS */
-
-#ifdef CONFIG_8260
-/* Compute 8260 clock values if the rom doesn't provide them.
- */
-static unsigned char bus2core_8260[] = {
-/*      0   1   2   3   4   5   6   7   8   9   a   b   c   d   e   f */
-	3,  2,  2,  2,  4,  4,  5,  9,  6, 11,  8, 10,  3, 12,  7,  2,
-	6,  5, 13,  2, 14,  4, 15,  2,  3, 11,  8, 10, 16, 12,  7,  2,
-};
-
-static void
-clk_8260(bd_t *bd)
-{
-	uint	scmr, vco_out, clkin;
-	uint	plldf, pllmf, corecnf;
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-	scmr = ip->im_clkrst.car_scmr;
-
-	/* The clkin is always bus frequency.
-	*/
-	clkin = bd->bi_busfreq;
-
-	/* Collect the bits from the scmr.
-	*/
-	plldf = (scmr >> 12) & 1;
-	pllmf = scmr & 0xfff;
-	corecnf = (scmr >> 24) &0x1f;
-
-	/* This is arithmetic from the 8260 manual.
-	*/
-	vco_out = clkin / (plldf + 1);
-	vco_out *= 2 * (pllmf + 1);
-	bd->bi_vco = vco_out;		/* Save for later */
-
-	bd->bi_cpmfreq = vco_out / 2;	/* CPM Freq, in MHz */
-	bd->bi_intfreq = bd->bi_busfreq * bus2core_8260[corecnf] / 2;
-
-	/* Set Baud rate divisor.  The power up default is divide by 16,
-	 * but we set it again here in case it was changed.
-	 */
-	ip->im_clkrst.car_sccr = 1;	/* DIV 16 BRG */
-	bd->bi_brgfreq = vco_out / 16;
-}
-
-static unsigned char bus2core_8280[] = {
-/*      0   1   2   3   4   5   6   7   8   9   a   b   c   d   e   f */
-	3,  2,  2,  2,  4,  4,  5,  9,  6, 11,  8, 10,  3, 12,  7,  2,
-	6,  5, 13,  2, 14,  2, 15,  2,  3,  2,  2,  2, 16,  2,  2,  2,
-};
-
-static void
-clk_8280(bd_t *bd)
-{
-	uint	scmr, main_clk, clkin;
-	uint	pllmf, corecnf;
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-	scmr = ip->im_clkrst.car_scmr;
-
-	/* The clkin is always bus frequency.
-	*/
-	clkin = bd->bi_busfreq;
-
-	/* Collect the bits from the scmr.
-	*/
-	pllmf = scmr & 0xf;
-	corecnf = (scmr >> 24) & 0x1f;
-
-	/* This is arithmetic from the 8280 manual.
-	*/
-	main_clk = clkin * (pllmf + 1);
-
-	bd->bi_cpmfreq = main_clk / 2;	/* CPM Freq, in MHz */
-	bd->bi_intfreq = bd->bi_busfreq * bus2core_8280[corecnf] / 2;
-
-	/* Set Baud rate divisor.  The power up default is divide by 16,
-	 * but we set it again here in case it was changed.
-	 */
-	ip->im_clkrst.car_sccr = (ip->im_clkrst.car_sccr & 0x3) | 0x1;
-	bd->bi_brgfreq = main_clk / 16;
-}
-#endif
-
-#ifdef CONFIG_SBC82xx
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-	unsigned long pvr;
-
-	bd = *bdp;
-
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 256 * 1024 * 1024;	/* just a guess */
-
-	cp = (void*)SBC82xx_MACADDR_NVRAM_SCC1;
-	memcpy(bd->bi_enetaddr, cp, 6);
-
-	/* can busfreq be calculated? */
-	pvr = mfspr(SPRN_PVR);
-	if ((pvr & 0xffff0000) == 0x80820000) {
-		bd->bi_busfreq = 100000000;
-		clk_8280(bd);
-	} else {
-		bd->bi_busfreq = 66000000;
-		clk_8260(bd);
-	}
-
-}
-#endif /* SBC82xx */
-
-#if defined(CONFIG_EST8260) || defined(CONFIG_TQM8260)
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	bd = *bdp;
-#if 0
-	/* This is actually provided by my boot rom.  I have it
-	 * here for those people that may load the kernel with
-	 * a JTAG/COP tool and not the rom monitor.
-	 */
-	bd->bi_baudrate = 115200;
-	bd->bi_intfreq = 200000000;
-	bd->bi_busfreq = 66666666;
-	bd->bi_cpmfreq = 66666666;
-	bd->bi_brgfreq = 33333333;
-	bd->bi_memsize = 16 * 1024 * 1024;
-#else
-	/* The boot rom passes these to us in MHz.  Linux now expects
-	 * them to be in Hz.
-	 */
-	bd->bi_intfreq *= 1000000;
-	bd->bi_busfreq *= 1000000;
-	bd->bi_cpmfreq *= 1000000;
-	bd->bi_brgfreq *= 1000000;
-#endif
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* EST8260 */
-
-#ifdef CONFIG_SBS8260
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	/* This should provided by the boot rom.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 64 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.  The development board had 66 MHz.
-	 */
-	bd->bi_busfreq = 66666666;
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 133000000;
-
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* SBS8260 */
-
-#ifdef CONFIG_RPX8260
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp, *keyvals;
-	int	i;
-	bd_t	*bd;
-
-	keyvals = (u_char *)*bdp;
-
-	bd = &bdinfo;
-	*bdp = bd;
-
-	/* This is almost identical to the RPX-Lite/Classic functions
-	 * on the 8xx boards.  It would be nice to have a key lookup
-	 * function in a string, but the format of all of the fields
-	 * is slightly different.
-	 */
-	cp = keyvals;
-	for (;;) {
-		if (*cp == 'E') {
-			cp++;
-			if (*cp == 'A') {
-				cp += 2;
-				rpx_eth(bd, cp);
-			}
-		}
-		if (*cp == 'S') {
-			cp++;
-			if (*cp == 'B') {
-				cp += 2;
-				bd->bi_baudrate = rpx_baseten(cp);
-			}
-		}
-		if (*cp == 'D') {
-			cp++;
-			if (*cp == '1') {
-				cp += 2;
-				bd->bi_memsize = rpx_baseten(cp) * 1024 * 1024;
-			}
-		}
-		if (*cp == 'X') {
-			cp++;
-			if (*cp == 'T') {
-				cp += 2;
-				bd->bi_busfreq = rpx_baseten(cp);
-			}
-		}
-		if (*cp == 'N') {
-			cp++;
-			if (*cp == 'V') {
-				cp += 2;
-				bd->bi_nvsize = rpx_baseten(cp) * 1024 * 1024;
-			}
-		}
-
-		/* Scan to the end of the record.
-		*/
-		while ((*cp != '\n') && (*cp != 0xff))
-			cp++;
-
-		/* If the next character is a 0 or ff, we are done.
-		*/
-		cp++;
-		if ((*cp == 0) || (*cp == 0xff))
-			break;
-	}
-	bd->bi_memstart = 0;
-
-	/* The memory size includes both the 60x and local bus DRAM.
-	 * I don't want to use the local bus DRAM for real memory,
-	 * so subtract it out.  It would be nice if they were separate
-	 * keys.
-	 */
-	bd->bi_memsize -= 32 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.
-	 */
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 200000000;
-}
-#endif /* RPX6 for testing */
-
-#ifdef CONFIG_ADS8260
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	/* This should provided by the boot rom.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 16 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.  The development board had 66 MHz.
-	 */
-	bd->bi_busfreq = 66666666;
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 200000000;
-
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* ADS8260 */
-
-#ifdef CONFIG_WILLOW
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	/* Willow has Open Firmware....I should learn how to get this
-	 * information from it.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 32 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.  The development board had 66 MHz.
-	 */
-	bd->bi_busfreq = 66666666;
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 200000000;
-
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* WILLOW */
-
-#if defined(CONFIG_XILINX_ML300) || defined(CONFIG_XILINX_ML403)
-void
-embed_config(bd_t ** bdp)
-{
-	static const unsigned long line_size = 32;
-	static const unsigned long congruence_classes = 256;
-	unsigned long addr;
-	unsigned long dccr;
-	uint8_t* cp;
-	bd_t *bd;
-	int i;
-
-	/*
-	 * Invalidate the data cache if the data cache is turned off.
-	 * - The 405 core does not invalidate the data cache on power-up
-	 *   or reset but does turn off the data cache. We cannot assume
-	 *   that the cache contents are valid.
-	 * - If the data cache is turned on this must have been done by
-	 *   a bootloader and we assume that the cache contents are
-	 *   valid.
-	 */
-	__asm__("mfdccr %0": "=r" (dccr));
-	if (dccr == 0) {
-		for (addr = 0;
-		     addr < (congruence_classes * line_size);
-		     addr += line_size) {
-			__asm__("dccci 0,%0": :"b"(addr));
-		}
-	}
-
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_memsize = XPAR_DDR_0_SIZE;
-	bd->bi_intfreq = XPAR_CORE_CLOCK_FREQ_HZ;
-	bd->bi_busfreq = XPAR_PLB_CLOCK_FREQ_HZ;
-	bd->bi_pci_busfreq = XPAR_PCI_0_CLOCK_FREQ_HZ;
-
-	/* Copy the default ethernet address */
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++)
-		bd->bi_enetaddr[i] = *cp++;
-
-	timebase_period_ns = 1000000000 / bd->bi_tbfreq;
-	/* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */
-}
-#endif /* CONFIG_XILINX_ML300 || CONFIG_XILINX_ML403 */
-
-#ifdef CONFIG_IBM_OPENBIOS
-/* This could possibly work for all treeboot roms.
-*/
-#if defined(CONFIG_BUBINGA)
-#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */
-#else
-#define BOARD_INFO_VECTOR	0xFFFE0B50
-#endif
-
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd, *treeboot_bd;
-	bd_t *(*get_board_info)(void) =
-	    (bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
-#if !defined(CONFIG_STB03xxx)
-
-	/* shut down the Ethernet controller that the boot rom
-	 * sometimes leaves running.
-	 */
-	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);     /* 1st reset MAL */
-	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */	
-	out_be32((volatile u32*)EMAC0_BASE,0x20000000);        /* then reset EMAC */
-#endif
-
-	bd = &bdinfo;
-	*bdp = bd;
-	if ((treeboot_bd = get_board_info()) != NULL) {
-		memcpy(bd, treeboot_bd, sizeof(bd_t));
-	}
-	else {
-		/* Hmmm...better try to stuff some defaults.
-		*/
-		bd->bi_memsize = 16 * 1024 * 1024;
-		cp = (u_char *)def_enet_addr;
-		for (i=0; i<6; i++) {
-			/* I should probably put different ones here,
-			 * hopefully only one is used.
-			 */
-			bd->BD_EMAC_ADDR(0,i) = *cp;
-
-#ifdef CONFIG_PCI
-			bd->bi_pci_enetaddr[i] = *cp++;
-#endif
-		}
-		bd->bi_tbfreq = 200 * 1000 * 1000;
-		bd->bi_intfreq = 200000000;
-		bd->bi_busfreq = 100000000;
-#ifdef CONFIG_PCI
-		bd->bi_pci_busfreq = 66666666;
-#endif
-	}
-	/* Yeah, this look weird, but on Redwood 4 they are
-	 * different object in the structure.  Sincr Redwwood 5
-	 * and Redwood 6 use OpenBIOS, it requires a special value.
-	 */
-#if defined(CONFIG_REDWOOD_5) || defined (CONFIG_REDWOOD_6)
-	bd->bi_tbfreq = 27 * 1000 * 1000;
-#endif
-	timebase_period_ns = 1000000000 / bd->bi_tbfreq;
-}
-#endif /* CONFIG_IBM_OPENBIOS */
-
-#ifdef CONFIG_EP405
-#include <linux/serial_reg.h>
-
-void
-embed_config(bd_t **bdp)
-{
-	u32 chcr0;
-	u_char *cp;
-	bd_t	*bd;
-
-	/* Different versions of the PlanetCore firmware vary in how
-	   they set up the serial port - in particular whether they
-	   use the internal or external serial clock for UART0.  Make
-	   sure the UART is in a known state. */
-	/* FIXME: We should use the board's 11.0592MHz external serial
-	   clock - it will be more accurate for serial rates.  For
-	   now, however the baud rates in ep405.h are for the internal
-	   clock. */
-	chcr0 = mfdcr(DCRN_CHCR0);
-	if ( (chcr0 & 0x1fff) != 0x103e ) {
-		mtdcr(DCRN_CHCR0, (chcr0 & 0xffffe000) | 0x103e);
-		/* The following tricks serial_init() into resetting the baud rate */
-		writeb(0, UART0_IO_BASE + UART_LCR);
-	}
-
-	/* We haven't seen actual problems with the EP405 leaving the
-	 * EMAC running (as we have on Walnut).  But the registers
-	 * suggest it may not be left completely quiescent.  Reset it
-	 * just to be sure. */
-	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);     /* 1st reset MAL */
-	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */	
-	out_be32((unsigned *)EMAC0_BASE,0x20000000);        /* then reset EMAC */
-
-	bd = &bdinfo;
-	*bdp = bd;
-#if 1
-	        cp = (u_char *)0xF0000EE0;
-	        for (;;) {
-	                if (*cp == 'E') {
-	                        cp++;
-	                        if (*cp == 'A') {
-                                  cp += 2;
-                                  rpx_eth(bd, cp);
-	                        }
-		         }
-
-	         	if (*cp == 'D') {
-	                        	cp++;
-	                        	if (*cp == '1') {
-		                                cp += 2;
-		                                rpx_memsize(bd, cp);
-	        	                }
-                	}
-
-			if (*cp == 'N') {
-				cp++;
-				if (*cp == 'V') {
-					cp += 2;
-					rpx_nvramsize(bd, cp);
-				}
-			}
-			while ((*cp != '\n') && (*cp != 0xff))
-			      cp++;
-
-	                cp++;
-	                if ((*cp == 0) || (*cp == 0xff))
-	                   break;
-	       }
-	bd->bi_intfreq   = 200000000;
-	bd->bi_busfreq   = 100000000;
-	bd->bi_pci_busfreq= 33000000 ;
-#else
-
-	bd->bi_memsize   = 64000000;
-	bd->bi_intfreq   = 200000000;
-	bd->bi_busfreq   = 100000000;
-	bd->bi_pci_busfreq= 33000000 ;
-#endif
-}
-#endif
diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S
deleted file mode 100644
index 1b4d7b1d4ec1..000000000000
--- a/arch/ppc/boot/simple/head.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Initial board bringup code for many different boards.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/reg.h>
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-	.text
-
-/*
- *      Begin at some arbitrary location in RAM or Flash
- *	  Initialize core registers
- *	  Configure memory controller (Not executing from RAM)
- *	Move the boot code to the link address (8M)
- *	  Setup C stack
- *	  Initialize UART
- *      Decompress the kernel to 0x0
- *      Jump to the kernel entry
- *
- */
-
-	.globl	start
-start:
-	bl	start_
-#ifdef CONFIG_IBM_OPENBIOS
-	/* The IBM "Tree" bootrom knows that the address of the bootrom
-	 * read only structure is 4 bytes after _start.
-	 */
-	.long	0x62726f6d		# structure ID - "brom"
-	.long	0x5f726f00		#              - "_ro\0"
-	.long	1			# structure version
-	.long	bootrom_cmdline		# address of *bootrom_cmdline
-#endif
-
-start_:
-#ifdef CONFIG_FORCE
-	/* We have some really bad firmware.  We must disable the L1
-	 * icache/dcache now or the board won't boot.
-	 */
-	li	r4,0x0000
-	isync
-	mtspr	SPRN_HID0,r4
-	sync
-	isync
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
-	mr	r29,r3	/* On the MBX860, r3 is the board info pointer.
-			 * On the RPXSUPER, r3 points to the NVRAM
-			 * configuration keys.
-			 * On PReP, r3 is the pointer to the residual data.
-			 */
-#endif
-
-#if defined(CONFIG_XILINX_VIRTEX_4_FX)
-	/* PPC errata 213: only for Virtex-4 FX */
-	mfccr0  0
-	oris    0,0,0x50000000@h
-	mtccr0  0
-#endif
-
-	mflr	r3	/* Save our actual starting address. */
-
-	/* The following functions we call must not modify r3 or r4.....
-	*/
-#ifdef CONFIG_6xx
-	/* On PReP we must look at the OpenFirmware pointer and sanity
-	 * test it.  On other platforms, we disable the MMU right now
-	 * and other bits.
-	 */
-#ifdef CONFIG_PPC_PREP
-/*
- * Save the OF pointer to r25, but only if the entry point is in a sane
- * location; if not we store 0.  If there is no entry point, or it is
- * invalid, we establish the default MSR value immediately.  Otherwise,
- * we defer doing that, to allow OF functions to be called, until we
- * begin uncompressing the kernel.
- */
-	lis	r8,0x0fff		/* r8 = 0x0fffffff */
-	ori	r8,r8,0xffff
-
-	subc	r8,r8,r5		/* r8 = (r5 <= r8) ? ~0 : 0 */
-	subfe	r8,r8,r8
-	nand	r8,r8,r8
-
-	and.	r5,r5,r8		/* r5 will be cleared if (r5 > r8) */
-	bne+	haveOF
-
-	li	r8,MSR_IP|MSR_FP	/* Not OF: set MSR immediately */
-  	mtmsr	r8
-	isync
-haveOF:
-	mr	r25,r5
-#else
-	bl	disable_6xx_mmu
-#endif
-	bl	disable_6xx_l1cache
-
-	CLEAR_CACHES
-#endif
-
-#ifdef CONFIG_8xx
-	mfmsr	r8		/* Turn off interrupts */
-	li	r9,0
-	ori	r9,r9,MSR_EE
-	andc	r8,r8,r9
-	mtmsr	r8
-
-	/* We do this because some boot roms don't initialize the
-	 * processor correctly. Don't do this if you want to debug
-	 * using a BDM device.
-	 */
-	li	r4,0		/* Zero DER to prevent FRZ */
-	mtspr	SPRN_DER,r4
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
-	mr	r4,r29	/* put the board info pointer where the relocate
-			 * routine will find it
-			 */
-#endif
-
-	/* Get the load address.
-	*/
-	subi	r3, r3, 4	/* Get the actual IP, not NIP */
-	b	relocate
-
diff --git a/arch/ppc/boot/simple/iic.c b/arch/ppc/boot/simple/iic.c
deleted file mode 100644
index 5e91489426b4..000000000000
--- a/arch/ppc/boot/simple/iic.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/* Minimal support functions to read configuration from IIC EEPROMS
- * on MPC8xx boards.  Originally written for RPGC RPX-Lite.
- * Dan Malek (dmalek@jlc.net).
- */
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/mpc8xx.h>
-#include <asm/cpm1.h>
-
-
-/* IIC functions.
- * These are just the basic master read/write operations so we can
- * examine serial EEPROM.
- */
-void	iic_read(uint devaddr, u_char *buf, uint offset, uint count);
-
-static	int	iic_init_done;
-
-static void
-iic_init(void)
-{
-	volatile iic_t *iip;
-	volatile i2c8xx_t *i2c;
-	volatile cpm8xx_t	*cp;
-	volatile immap_t	*immap;
-	uint	dpaddr;
-
-	immap = (immap_t *)IMAP_ADDR;
-	cp = (cpm8xx_t *)&(immap->im_cpm);
-
-	/* Reset the CPM.  This is necessary on the 860 processors
-	 * that may have started the SCC1 ethernet without relocating
-	 * the IIC.
-	 * This also stops the Ethernet in case we were loaded by a
-	 * BOOTP rom monitor.
-	 */
-	cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
-
-	/* Wait for it.
-	*/
-	while (cp->cp_cpcr & (CPM_CR_RST | CPM_CR_FLG));
-
-	/* Remove any microcode patches.  We will install our own
-	 * later.
-	 */
-	cp->cp_cpmcr1 = 0;
-	cp->cp_cpmcr2 = 0;
-	cp->cp_cpmcr3 = 0;
-	cp->cp_cpmcr4 = 0;
-	cp->cp_rccr = 0;
-
-	iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-	i2c = (i2c8xx_t *)&(immap->im_i2c);
-
-	/* Initialize Port B IIC pins.
-	*/
-	cp->cp_pbpar |= 0x00000030;
-	cp->cp_pbdir |= 0x00000030;
-	cp->cp_pbodr |= 0x00000030;
-
-	/* Initialize the parameter ram.
-	*/
-
-	/* Allocate space for a two transmit and one receive buffer
-	 * descriptor in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 */
-	dpaddr = 0x0840;
-
-	/* Set up the IIC parameters in the parameter ram.
-	*/
-	iip->iic_tbase = dpaddr;
-	iip->iic_rbase = dpaddr + (2 * sizeof(cbd_t));
-
-	iip->iic_tfcr = SMC_EB;
-	iip->iic_rfcr = SMC_EB;
-
-	/* This should really be done by the reader/writer.
-	*/
-	iip->iic_mrblr = 128;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Select an arbitrary address.  Just make sure it is unique.
-	*/
-	i2c->i2c_i2add = 0x34;
-
-	/* Make clock run maximum slow.
-	*/
-	i2c->i2c_i2brg = 7;
-
-	/* Disable interrupts.
-	*/
-	i2c->i2c_i2cmr = 0;
-	i2c->i2c_i2cer = 0xff;
-
-	/* Enable SDMA.
-	*/
-	immap->im_siu_conf.sc_sdcr = 1;
-
-	iic_init_done = 1;
-}
-
-/* Read from IIC.
- * Caller provides device address, memory buffer, and byte count.
- */
-static	u_char	iitemp[32];
-
-void
-iic_read(uint devaddr, u_char *buf, uint offset, uint count)
-{
-	volatile iic_t		*iip;
-	volatile i2c8xx_t	*i2c;
-	volatile cbd_t		*tbdf, *rbdf;
-	volatile cpm8xx_t	*cp;
-	volatile immap_t	*immap;
-	u_char			*tb;
-	uint			temp;
-
-	/* If the interface has not been initialized, do that now.
-	*/
-	if (!iic_init_done)
-		iic_init();
-
-	immap = (immap_t *)IMAP_ADDR;
-	cp = (cpm8xx_t *)&(immap->im_cpm);
-
-	iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-	i2c = (i2c8xx_t *)&(immap->im_i2c);
-
-	tbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_tbase];
-	rbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_rbase];
-
-	/* Send a "dummy write" operation.  This is a write request with
-	 * only the offset sent, followed by another start condition.
-	 * This will ensure we start reading from the first location
-	 * of the EEPROM.
-	 */
-	tb = iitemp;
-	tb = (u_char *)(((uint)tb + 15) & ~15);
-	tbdf->cbd_bufaddr = (int)tb;
-	*tb = devaddr & 0xfe;	/* Device address */
-	*(tb+1) = offset;		/* Offset */
-	tbdf->cbd_datlen = 2;		/* Length */
-	tbdf->cbd_sc =
-	      BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START;
-
-	i2c->i2c_i2mod = 1;	/* Enable */
-	i2c->i2c_i2cer = 0xff;
-	i2c->i2c_i2com = 0x81;	/* Start master */
-
-	/* Wait for IIC transfer.
-	*/
-#if 0
-	while ((i2c->i2c_i2cer & 3) == 0);
-
-	if (tbdf->cbd_sc & BD_SC_READY)
-		printf("IIC ra complete but tbuf ready\n");
-#else
-	temp = 10000000;
-	while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0))
-		temp--;
-#if 0
-	/* We can't do this...there is no serial port yet!
-	*/
-	if (temp == 0) {
-		printf("Timeout reading EEPROM\n");
-		return;
-	}
-#endif
-#endif
-	
-	/* Chip errata, clear enable.
-	*/
-	i2c->i2c_i2mod = 0;
-
-	/* To read, we need an empty buffer of the proper length.
-	 * All that is used is the first byte for address, the remainder
-	 * is just used for timing (and doesn't really have to exist).
-	 */
-	tbdf->cbd_bufaddr = (int)tb;
-	*tb = devaddr | 1;	/* Device address */
-	rbdf->cbd_bufaddr = (uint)buf;		/* Desination buffer */
-	tbdf->cbd_datlen = rbdf->cbd_datlen = count + 1;	/* Length */
-	tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START;
-	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Chip bug, set enable here.
-	*/
-	i2c->i2c_i2mod = 1;	/* Enable */
-	i2c->i2c_i2cer = 0xff;
-	i2c->i2c_i2com = 0x81;	/* Start master */
-
-	/* Wait for IIC transfer.
-	*/
-#if 0
-	while ((i2c->i2c_i2cer & 1) == 0);
-
-	if (rbdf->cbd_sc & BD_SC_EMPTY)
-		printf("IIC read complete but rbuf empty\n");
-#else
-	temp = 10000000;
-	while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0))
-		temp--;
-#endif
-	
-	/* Chip errata, clear enable.
-	*/
-	i2c->i2c_i2mod = 0;
-}
diff --git a/arch/ppc/boot/simple/m8260_tty.c b/arch/ppc/boot/simple/m8260_tty.c
deleted file mode 100644
index d770947e9b8f..000000000000
--- a/arch/ppc/boot/simple/m8260_tty.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/* Minimal serial functions needed to send messages out the serial
- * port on SMC1.
- */
-#include <linux/types.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/immap_cpm2.h>
-
-uint	no_print;
-extern char	*params[];
-extern int	nparams;
-static		u_char	cons_hold[128], *sgptr;
-static		int	cons_hold_cnt;
-
-/* If defined, enables serial console.  The value (1 through 4)
- * should designate which SCC is used, but this isn't complete.  Only
- * SCC1 is known to work at this time.
- * We're only linked if SERIAL_CPM_CONSOLE=y, so we only need to test
- * SERIAL_CPM_SCC1.
- */
-#ifdef CONFIG_SERIAL_CPM_SCC1
-#define SCC_CONSOLE 1
-#endif
-
-unsigned long
-serial_init(int ignored, bd_t *bd)
-{
-#ifdef SCC_CONSOLE
-	volatile scc_t		*sccp;
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_t		*sp;
-	volatile smc_uart_t	*up;
-#endif
-	volatile cbd_t	*tbdf, *rbdf;
-	volatile cpm2_map_t	*ip;
-	volatile iop_cpm2_t	*io;
-	volatile cpm_cpm2_t	*cp;
-	uint	dpaddr, memaddr;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-	cp = &ip->im_cpm;
-	io = &ip->im_ioport;
-
-	/* Perform a reset.
-	*/
-	cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
-
-	/* Wait for it.
-	*/
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-#ifdef CONFIG_ADS8260
-	/* Enable the RS-232 transceivers.
-	*/
-	*(volatile uint *)(BCSR_ADDR + 4) &=
-					~(BCSR1_RS232_EN1 | BCSR1_RS232_EN2);
-#endif
-
-#ifdef SCC_CONSOLE
-	sccp = (scc_t *)&(ip->im_scc[SCC_CONSOLE-1]);
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/* Use Port D for SCC1 instead of other functions.
-	*/
-	io->iop_ppard |= 0x00000003;
-	io->iop_psord &= ~0x00000001;	/* Rx */
-	io->iop_psord |= 0x00000002;	/* Tx */
-	io->iop_pdird &= ~0x00000001;	/* Rx */
-	io->iop_pdird |= 0x00000002;	/* Tx */
-
-#else
-	sp = (smc_t*)&(ip->im_smc[0]);
-	*(ushort *)(&ip->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1;
-	up = (smc_uart_t *)&ip->im_dprambase[PROFF_SMC1];
-
-	/* Disable transmitter/receiver.
-	*/
-	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
-	/* Use Port D for SMC1 instead of other functions.
-	*/
-	io->iop_ppard |= 0x00c00000;
-	io->iop_pdird |= 0x00400000;
-	io->iop_pdird &= ~0x00800000;
-	io->iop_psord &= ~0x00c00000;
-#endif
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 */
-	dpaddr = 0x0800;
-
-	/* Grab a few bytes from the top of memory.
-	 */
-	memaddr = (bd->bi_memsize - 256) & ~15;
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	rbdf = (cbd_t *)&ip->im_dprambase[dpaddr];
-	rbdf->cbd_bufaddr = memaddr;
-	rbdf->cbd_sc = 0;
-	tbdf = rbdf + 1;
-	tbdf->cbd_bufaddr = memaddr+128;
-	tbdf->cbd_sc = 0;
-
-	/* Set up the uart parameters in the parameter ram.
-	*/
-#ifdef SCC_CONSOLE
-	sup->scc_genscc.scc_rbase = dpaddr;
-	sup->scc_genscc.scc_tbase = dpaddr + sizeof(cbd_t);
-
-	/* Set up the uart parameters in the
-	 * parameter ram.
-	 */
-	sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
-	sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
-
-	sup->scc_genscc.scc_mrblr = 128;
-	sup->scc_maxidl = 8;
-	sup->scc_brkcr = 1;
-	sup->scc_parec = 0;
-	sup->scc_frmec = 0;
-	sup->scc_nosec = 0;
-	sup->scc_brkec = 0;
-	sup->scc_uaddr1 = 0;
-	sup->scc_uaddr2 = 0;
-	sup->scc_toseq = 0;
-	sup->scc_char1 = 0x8000;
-	sup->scc_char2 = 0x8000;
-	sup->scc_char3 = 0x8000;
-	sup->scc_char4 = 0x8000;
-	sup->scc_char5 = 0x8000;
-	sup->scc_char6 = 0x8000;
-	sup->scc_char7 = 0x8000;
-	sup->scc_char8 = 0x8000;
-	sup->scc_rccm = 0xc0ff;
-
-	/* Send the CPM an initialize command.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
-			CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sccp->scc_gsmrh = 0;
-	sccp->scc_gsmrl =
-		(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-	/* Disable all interrupts and clear all pending
-	 * events.
-	 */
-	sccp->scc_sccm = 0;
-	sccp->scc_scce = 0xffff;
-	sccp->scc_dsr = 0x7e7e;
-	sccp->scc_psmr = 0x3000;
-
-	/* Wire BRG1 to SCC1.  The console driver will take care of
-	 * others.
-	 */
-	ip->im_cpmux.cmx_scr = 0;
-#else
-	up->smc_rbase = dpaddr;
-	up->smc_tbase = dpaddr+sizeof(cbd_t);
-	up->smc_rfcr = CPMFCR_EB;
-	up->smc_tfcr = CPMFCR_EB;
-	up->smc_brklen = 0;
-	up->smc_brkec = 0;
-	up->smc_brkcr = 0;
-	up->smc_mrblr = 128;
-	up->smc_maxidl = 8;
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-	/* Mask all interrupts and remove anything pending.
-	*/
-	sp->smc_smcm = 0;
-	sp->smc_smce = 0xff;
-
-	/* Set up the baud rate generator.
-	 */
-	ip->im_cpmux.cmx_smr = 0;
-#endif
-
-	/* The baud rate divisor needs to be coordinated with clk_8260().
-	*/
-	ip->im_brgc1 =
-		(((bd->bi_brgfreq/16) / bd->bi_baudrate) << 1) |
-								CPM_BRG_EN;
-
-	/* Make the first buffer the only buffer.
-	*/
-	tbdf->cbd_sc |= BD_SC_WRAP;
-	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-#ifdef SCC_CONSOLE
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#else
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Enable transmitter/receiver.
-	*/
-	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-#endif
-
-	/* This is ignored.
-	*/
-	return 0;
-}
-
-int
-serial_readbuf(u_char *cbuf)
-{
-	volatile cbd_t		*rbdf;
-	volatile char		*buf;
-#ifdef SCC_CONSOLE
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_uart_t	*up;
-#endif
-	volatile cpm2_map_t	*ip;
-	int	i, nc;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-
-#ifdef SCC_CONSOLE
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase];
-#else
-	up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]);
-	rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase];
-#endif
-
-	/* Wait for character to show up.
-	*/
-	buf = (char *)rbdf->cbd_bufaddr;
-	while (rbdf->cbd_sc & BD_SC_EMPTY);
-	nc = rbdf->cbd_datlen;
-	for (i=0; i<nc; i++)
-		*cbuf++ = *buf++;
-	rbdf->cbd_sc |= BD_SC_EMPTY;
-
-	return(nc);
-}
-
-void
-serial_putc(void *ignored, const char c)
-{
-	volatile cbd_t		*tbdf;
-	volatile char		*buf;
-#ifdef SCC_CONSOLE
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_uart_t	*up;
-#endif
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-#ifdef SCC_CONSOLE
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	tbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_tbase];
-#else
-	up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]);
-	tbdf = (cbd_t *)&ip->im_dprambase[up->smc_tbase];
-#endif
-
-	/* Wait for last character to go.
-	*/
-	buf = (char *)tbdf->cbd_bufaddr;
-	while (tbdf->cbd_sc & BD_SC_READY);
-
-	*buf = c;
-	tbdf->cbd_datlen = 1;
-	tbdf->cbd_sc |= BD_SC_READY;
-}
-
-char
-serial_getc(void *ignored)
-{
-	char	c;
-
-	if (cons_hold_cnt <= 0) {
-		cons_hold_cnt = serial_readbuf(cons_hold);
-		sgptr = cons_hold;
-	}
-	c = *sgptr++;
-	cons_hold_cnt--;
-
-	return(c);
-}
-
-int
-serial_tstc(void *ignored)
-{
-	volatile cbd_t		*rbdf;
-#ifdef SCC_CONSOLE
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_uart_t	*up;
-#endif
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-#ifdef SCC_CONSOLE
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase];
-#else
-	up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]);
-	rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase];
-#endif
-
-	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
diff --git a/arch/ppc/boot/simple/m8xx_tty.c b/arch/ppc/boot/simple/m8xx_tty.c
deleted file mode 100644
index f28924e6aeb4..000000000000
--- a/arch/ppc/boot/simple/m8xx_tty.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/* Minimal serial functions needed to send messages out the serial
- * port on the MBX console.
- *
- * The MBX uses SMC1 for the serial port.  We reset the port and use
- * only the first BD that EPPC-Bug set up as a character FIFO.
- *
- * Later versions (at least 1.4, maybe earlier) of the MBX EPPC-Bug
- * use COM1 instead of SMC1 as the console port.  This kinda sucks
- * for the rest of the kernel, so here we force the use of SMC1 again.
- */
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/mpc8xx.h>
-#include <asm/cpm1.h>
-
-#ifdef CONFIG_MBX
-#define MBX_CSR1	((volatile u_char *)0xfa100000)
-#define CSR1_COMEN	(u_char)0x02
-#endif
-
-#ifdef TQM_SMC2_CONSOLE
-#define PROFF_CONS	PROFF_SMC2
-#define CPM_CR_CH_CONS	CPM_CR_CH_SMC2
-#define SMC_INDEX	1
-static volatile iop8xx_t *iopp = (iop8xx_t *)&(((immap_t *)IMAP_ADDR)->im_ioport);
-#else
-#define PROFF_CONS	PROFF_SMC1
-#define CPM_CR_CH_CONS	CPM_CR_CH_SMC1
-#define SMC_INDEX	0
-#endif
-
-static cpm8xx_t	*cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-
-unsigned long
-serial_init(int ignored, bd_t *bd)
-{
-	volatile smc_t		*sp;
-	volatile smc_uart_t	*up;
-	volatile cbd_t	*tbdf, *rbdf;
-	volatile cpm8xx_t	*cp;
-	uint	dpaddr, memaddr;
-#ifndef CONFIG_MBX
-	uint	ui;
-#endif
-
-	cp = cpmp;
-	sp = (smc_t*)&(cp->cp_smc[SMC_INDEX]);
-	up = (smc_uart_t *)&cp->cp_dparam[PROFF_CONS];
-
-	/* Disable transmitter/receiver.
-	*/
-	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
-#ifdef CONFIG_FADS
-	/* Enable SMC1/2 transceivers.
-	*/
-	*((volatile uint *)BCSR1) &= ~(BCSR1_RS232EN_1|BCSR1_RS232EN_2);
-#endif
-
-#ifndef CONFIG_MBX
-	{
-	/* Initialize SMCx and use it for the console port.
-	 */
-
-	/* Enable SDMA.
-	*/
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
-
-#ifdef TQM_SMC2_CONSOLE
-	/* Use Port A for SMC2 instead of other functions.
-	*/
-	iopp->iop_papar |=  0x00c0;
-	iopp->iop_padir &= ~0x00c0;
-	iopp->iop_paodr &= ~0x00c0;
-#else
-	/* Use Port B for SMCs instead of other functions.
-	*/
-	cp->cp_pbpar |= 0x00000cc0;
-	cp->cp_pbdir &= ~0x00000cc0;
-	cp->cp_pbodr &= ~0x00000cc0;
-#endif
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 */
-	dpaddr = 0x0800;
-
-	/* Grab a few bytes from the top of memory for SMC FIFOs.
-	 */
-	memaddr = (bd->bi_memsize - 32) & ~15;
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
-	rbdf->cbd_bufaddr = memaddr;
-	rbdf->cbd_sc = 0;
-	tbdf = rbdf + 1;
-	tbdf->cbd_bufaddr = memaddr+4;
-	tbdf->cbd_sc = 0;
-
-	/* Set up the uart parameters in the parameter ram.
-	*/
-	up->smc_rbase = dpaddr;
-	up->smc_tbase = dpaddr+sizeof(cbd_t);
-	up->smc_rfcr = SMC_EB;
-	up->smc_tfcr = SMC_EB;
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-	/* Mask all interrupts and remove anything pending.
-	*/
-	sp->smc_smcm = 0;
-	sp->smc_smce = 0xff;
-
-	/* Set up the baud rate generator.
-	 * See 8xx_io/commproc.c for details.
-	 * This wires BRG1 to SMC1 and BRG2 to SMC2;
-	 */
-	cp->cp_simode = 0x10000000;
-	ui = bd->bi_intfreq / 16 / bd->bi_baudrate;
-#ifdef TQM_SMC2_CONSOLE
-	cp->cp_brgc2 =
-#else
-	cp->cp_brgc1 =
-#endif
-		((ui - 1) < 4096)
-		? (((ui - 1) << 1) | CPM_BRG_EN)
-		: ((((ui / 16) - 1) << 1) | CPM_BRG_EN | CPM_BRG_DIV16);
-
-#else /* CONFIG_MBX */
-	if (*MBX_CSR1 & CSR1_COMEN) {
-		/* COM1 is enabled.  Initialize SMC1 and use it for
-		 * the console port.
-		 */
-
-		/* Enable SDMA.
-		*/
-		((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
-
-		/* Use Port B for SMCs instead of other functions.
-		*/
-		cp->cp_pbpar |= 0x00000cc0;
-		cp->cp_pbdir &= ~0x00000cc0;
-		cp->cp_pbodr &= ~0x00000cc0;
-
-		/* Allocate space for two buffer descriptors in the DP ram.
-		 * For now, this address seems OK, but it may have to
-		 * change with newer versions of the firmware.
-		 */
-		dpaddr = 0x0800;
-
-		/* Grab a few bytes from the top of memory.  EPPC-Bug isn't
-		 * running any more, so we can do this.
-		 */
-		memaddr = (bd->bi_memsize - 32) & ~15;
-
-		/* Set the physical address of the host memory buffers in
-		 * the buffer descriptors.
-		 */
-		rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
-		rbdf->cbd_bufaddr = memaddr;
-		rbdf->cbd_sc = 0;
-		tbdf = rbdf + 1;
-		tbdf->cbd_bufaddr = memaddr+4;
-		tbdf->cbd_sc = 0;
-
-		/* Set up the uart parameters in the parameter ram.
-		*/
-		up->smc_rbase = dpaddr;
-		up->smc_tbase = dpaddr+sizeof(cbd_t);
-		up->smc_rfcr = SMC_EB;
-		up->smc_tfcr = SMC_EB;
-
-		/* Set UART mode, 8 bit, no parity, one stop.
-		 * Enable receive and transmit.
-		 */
-		sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-		/* Mask all interrupts and remove anything pending.
-		*/
-		sp->smc_smcm = 0;
-		sp->smc_smce = 0xff;
-
-		/* Set up the baud rate generator.
-		 * See 8xx_io/commproc.c for details.
-		 */
-		cp->cp_simode = 0x10000000;
-		cp->cp_brgc1 =
-			(((bd->bi_intfreq/16) / 9600) << 1) | CPM_BRG_EN;
-
-		/* Enable SMC1 for console output.
-		*/
-		*MBX_CSR1 &= ~CSR1_COMEN;
-	}
-	else {
-#endif /* ndef CONFIG_MBX */
-		/* SMCx is used as console port.
-		*/
-		tbdf = (cbd_t *)&cp->cp_dpmem[up->smc_tbase];
-		rbdf = (cbd_t *)&cp->cp_dpmem[up->smc_rbase];
-
-		/* Issue a stop transmit, and wait for it.
-		*/
-		cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS,
-					CPM_CR_STOP_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	}
-
-	/* Make the first buffer the only buffer.
-	*/
-	tbdf->cbd_sc |= BD_SC_WRAP;
-	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Single character receive.
-	*/
-	up->smc_mrblr = 1;
-	up->smc_maxidl = 0;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Enable transmitter/receiver.
-	*/
-	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
-	/* This is ignored.
-	*/
-	return 0;
-}
-
-void
-serial_putc(void *ignored, const char c)
-{
-	volatile cbd_t		*tbdf;
-	volatile char		*buf;
-	volatile smc_uart_t	*up;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
-	tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase];
-
-	/* Wait for last character to go.
-	*/
-	buf = (char *)tbdf->cbd_bufaddr;
-	while (tbdf->cbd_sc & BD_SC_READY);
-
-	*buf = c;
-	tbdf->cbd_datlen = 1;
-	tbdf->cbd_sc |= BD_SC_READY;
-}
-
-char
-serial_getc(void *ignored)
-{
-	volatile cbd_t		*rbdf;
-	volatile char		*buf;
-	volatile smc_uart_t	*up;
-	char			c;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	/* Wait for character to show up.
-	*/
-	buf = (char *)rbdf->cbd_bufaddr;
-	while (rbdf->cbd_sc & BD_SC_EMPTY);
-	c = *buf;
-	rbdf->cbd_sc |= BD_SC_EMPTY;
-
-	return(c);
-}
-
-int
-serial_tstc(void *ignored)
-{
-	volatile cbd_t		*rbdf;
-	volatile smc_uart_t	*up;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
diff --git a/arch/ppc/boot/simple/misc-chestnut.c b/arch/ppc/boot/simple/misc-chestnut.c
deleted file mode 100644
index 14a4b56d4f84..000000000000
--- a/arch/ppc/boot/simple/misc-chestnut.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Setup for the IBM Chestnut (ibm-750fxgx_eval)
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/chestnut.h>
-
-/* Not in the kernel so won't include kernel.h to get its 'max' definition */
-#define max(a,b)	(((a) > (b)) ? (a) : (b))
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	/*
-	 * Change device bus 2 window so that bootoader can do I/O thru
-	 * 8250/16550 UART that's mapped in that window.
-	 */
-	out_le32(new_base + MV64x60_CPU2DEV_2_BASE, CHESTNUT_UART_BASE >> 16);
-	out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, CHESTNUT_UART_SIZE >> 16);
-	__asm__ __volatile__("sync");
-#endif
-}
diff --git a/arch/ppc/boot/simple/misc-cpci690.c b/arch/ppc/boot/simple/misc-cpci690.c
deleted file mode 100644
index 8a8614d11a32..000000000000
--- a/arch/ppc/boot/simple/misc-cpci690.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Add birec data for Force CPCI690 board.
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <platforms/cpci690.h>
-
-#define	KB	(1024UL)
-#define	MB	(1024UL*KB)
-#define	GB	(1024UL*MB)
-
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-
-u32 mag = 0xffff;
-
-unsigned long
-get_mem_size(void)
-{
-	u32	size;
-
-	switch (in_8(((void __iomem *)CPCI690_BR_BASE + CPCI690_BR_MEM_CTLR))
-			& 0x07) {
-	case 0x01:
-		size = 256*MB;
-		break;
-	case 0x02:
-		size = 512*MB;
-		break;
-	case 0x03:
-		size = 768*MB;
-		break;
-	case 0x04:
-		size = 1*GB;
-		break;
-	case 0x05:
-		size = 1*GB + 512*MB;
-		break;
-	case 0x06:
-		size = 2*GB;
-		break;
-	default:
-		size = 0;
-	}
-
-	return size;
-}
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	mv64x60_console_baud = CPCI690_MPSC_BAUD;
-	mv64x60_mpsc_clk_src = CPCI690_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq =
-		(get_mem_size() >= (1*GB)) ? 100000000 : 133333333;
-}
diff --git a/arch/ppc/boot/simple/misc-embedded.c b/arch/ppc/boot/simple/misc-embedded.c
deleted file mode 100644
index d5a00eb0e4eb..000000000000
--- a/arch/ppc/boot/simple/misc-embedded.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Originally adapted by Gary Thomas.  Much additional work by
- * Cort Dougan <cort@fsmlabs.com>.  On top of that still more work by
- * Dan Malek <dmalek@jlc.net>.
- *
- * Currently maintained by: Tom Rini <trini@kernel.crashing.org>
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/bootinfo.h>
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/residual.h>
-#if defined(CONFIG_4xx)
-#include <asm/ibm4xx.h>
-#elif defined(CONFIG_8xx)
-#include <asm/mpc8xx.h>
-#elif defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#endif
-
-#include "nonstdio.h"
-
-/* The linker tells us where the image is. */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _end[];
-
-/* Because of the limited amount of memory on embedded, it presents
- * loading problems.  The biggest is that we load this boot program
- * into a relatively low memory address, and the Linux kernel Bss often
- * extends into this space when it get loaded.  When the kernel starts
- * and zeros the BSS space, it also writes over the information we
- * save here and pass to the kernel (usually board info).
- * On these boards, we grab some known memory holes to hold this information.
- */
-char cmd_buf[256];
-char *cmd_line = cmd_buf;
-char *avail_ram;
-char *end_avail;
-char *zimage_start;
-
-/* This is for 4xx treeboot.  It provides a place for the bootrom
- * give us a pointer to a rom environment command line.
- */
-char *bootrom_cmdline = "";
-
-/* This is the default cmdline that will be given to the user at boot time..
- * If none was specified at compile time, we'll give it one that should work.
- * -- Tom */
-#ifdef CONFIG_CMDLINE_BOOL
-char compiled_string[] = CONFIG_CMDLINE;
-#endif
-char ramroot_string[] = "root=/dev/ram";
-char netroot_string[] = "root=/dev/nfs rw ip=on";
-
-/* Serial port to use. */
-unsigned long com_port;
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. - Tom */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-extern unsigned long serial_init(int chan, bd_t *bp);
-extern void serial_close(unsigned long com_port);
-extern unsigned long start;
-extern void flush_instruction_cache(void);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void embed_config(bd_t **bp);
-
-/* Weak function for boards which don't need to build the
- * board info struct because they are using PPCBoot/U-Boot.
- */
-void __attribute__ ((weak))
-embed_config(bd_t **bdp)
-{
-}
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, bd_t *bp)
-{
-	char *cp, ch;
-	int timer = 0, zimage_size;
-	unsigned long initrd_size;
-
-	/* First, capture the embedded board information.  Then
-	 * initialize the serial console port.
-	 */
-	embed_config(&bp);
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || \
-    defined(CONFIG_SERIAL_8250_CONSOLE) || \
-    defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	com_port = serial_init(0, bp);
-#endif
-
-	/* Grab some space for the command line and board info.  Since
-	 * we no longer use the ELF header, but it was loaded, grab
-	 * that space.
-	 */
-#ifdef CONFIG_MBX
-	/* Because of the way the MBX loads the ELF image, we can't
-	 * tell where we started.  We read a magic variable from the NVRAM
-	 * that gives us the intermediate buffer load address.
-	 */
-	load_addr = *(uint *)0xfa000020;
-	load_addr += 0x10000;		/* Skip ELF header */
-#endif
-	/* copy board data */
-	if (bp)
-		memcpy(hold_residual,bp,sizeof(bd_t));
-
-	/* Set end of memory available to us.  It is always the highest
-	 * memory address provided by the board information.
-	 */
-	end_avail = (char *)(bp->bi_memsize);
-
-	puts("\nloaded at:     "); puthex(load_addr);
-	puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n");
-	if ( (unsigned long)load_addr != (unsigned long)&start ) {
-		puts("relocated to:  "); puthex((unsigned long)&start);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
-		puts("\n");
-	}
-
-	if ( bp ) {
-		puts("board data at: "); puthex((unsigned long)bp);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)bp + sizeof(bd_t)));
-		puts("\nrelocated to:  ");
-		puthex((unsigned long)hold_residual);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)hold_residual + sizeof(bd_t)));
-		puts("\n");
-	}
-
-	/*
-	 * We link ourself to an arbitrary low address.  When we run, we
-	 * relocate ourself to that address.  __image_being points to
-	 * the part of the image where the zImage is. -- Tom
-	 */
-	zimage_start = (char *)(unsigned long)(&__image_begin);
-	zimage_size = (unsigned long)(&__image_end) -
-			(unsigned long)(&__image_begin);
-
-	initrd_size = (unsigned long)(&__ramdisk_end) -
-		(unsigned long)(&__ramdisk_begin);
-
-	/*
-	 * The zImage and initrd will be between start and _end, so they've
-	 * already been moved once.  We're good to go now. -- Tom
-	 */
-	puts("zimage at:     "); puthex((unsigned long)zimage_start);
-	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
-	puts("\n");
-
-	if ( initrd_size ) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
-	}
-
-	/*
-	 * setup avail_ram - this is the first part of ram usable
-	 * by the uncompress code.  Anything after this program in RAM
-	 * is now fair game. -- Tom
-	 */
-	avail_ram = (char *)PAGE_ALIGN((unsigned long)_end);
-
-	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
-	puthex((unsigned long)end_avail); puts("\n");
-	puts("\nLinux/PPC load: ");
-	cp = cmd_line;
-	/* This is where we try and pick the right command line for booting.
-	 * If we were given one at compile time, use it.  It Is Right.
-	 * If we weren't, see if we have a ramdisk.  If so, thats root.
-	 * When in doubt, give them the netroot (root=/dev/nfs rw) -- Tom
-	 */
-#ifdef CONFIG_CMDLINE_BOOL
-	memcpy (cmd_line, compiled_string, sizeof(compiled_string));
-#else
-	if ( initrd_size )
-		memcpy (cmd_line, ramroot_string, sizeof(ramroot_string));
-	else
-		memcpy (cmd_line, netroot_string, sizeof(netroot_string));
-#endif
-	while ( *cp )
-		putc(*cp++);
-	while (timer++ < 5*1000) {
-		if (tstc()) {
-			while ((ch = getc()) != '\n' && ch != '\r') {
-				if (ch == '\b' || ch == '\177') {
-					if (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else if (ch == '\030'		/* ^x */
-					   || ch == '\025') {	/* ^u */
-					while (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else {
-					*cp++ = ch;
-					putc(ch);
-				}
-			}
-			break;  /* Exit 'timer' loop */
-		}
-		udelay(1000);  /* 1 msec */
-	}
-	*cp = 0;
-	puts("\nUncompressing Linux...");
-
-	gunzip(0, 0x400000, zimage_start, &zimage_size);
-	flush_instruction_cache();
-	puts("done.\n");
-	{
-		struct bi_record *rec;
-		unsigned long initrd_loc = 0;
-		unsigned long rec_loc = _ALIGN((unsigned long)(zimage_size) +
-				(1 << 20) - 1, (1 << 20));
-		rec = (struct bi_record *)rec_loc;
-
-		/* We need to make sure that the initrd and bi_recs do not
-		 * overlap. */
-		if ( initrd_size ) {
-			initrd_loc = (unsigned long)(&__ramdisk_begin);
-			/* If the bi_recs are in the middle of the current
-			 * initrd, move the initrd to the next MB
-			 * boundary. */
-			if ((rec_loc > initrd_loc) &&
-					((initrd_loc + initrd_size)
-					 > rec_loc)) {
-				initrd_loc = _ALIGN((unsigned long)(zimage_size)
-						+ (2 << 20) - 1, (2 << 20));
-			 	memmove((void *)initrd_loc, &__ramdisk_begin,
-					 initrd_size);
-		         	puts("initrd moved:  "); puthex(initrd_loc);
-			 	puts(" "); puthex(initrd_loc + initrd_size);
-			 	puts("\n");
-			}
-		}
-
-		rec->tag = BI_FIRST;
-		rec->size = sizeof(struct bi_record);
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-		rec->tag = BI_CMD_LINE;
-		memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1);
-		rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1;
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-		if ( initrd_size ) {
-			rec->tag = BI_INITRD;
-			rec->data[0] = initrd_loc;
-			rec->data[1] = initrd_size;
-			rec->size = sizeof(struct bi_record) + 2 *
-				sizeof(unsigned long);
-			rec = (struct bi_record *)((unsigned long)rec +
-					rec->size);
-		}
-
-		rec->tag = BI_LAST;
-		rec->size = sizeof(struct bi_record);
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-	}
-	puts("Now booting the kernel\n");
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
-	serial_close(com_port);
-#endif
-
-	return (unsigned long)hold_residual;
-}
diff --git a/arch/ppc/boot/simple/misc-ev64260.c b/arch/ppc/boot/simple/misc-ev64260.c
deleted file mode 100644
index 0b3978632aca..000000000000
--- a/arch/ppc/boot/simple/misc-ev64260.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Host bridge init code for the Marvell/Galileo EV-64260-BP evaluation board
- * with a GT64260 onboard.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/reg.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/ev64260.h>
-
-#ifdef CONFIG_SERIAL_MPSC_CONSOLE
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-#endif
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	u32	p, v;
-
-	/* DINK doesn't enable 745x timebase, so enable here (Adrian Cox) */
-	p = mfspr(SPRN_PVR);
-	p >>= 16;
-
-	/* Reasonable SWAG at a 745x PVR value */
-	if (((p & 0xfff0) == 0x8000) && (p != 0x800c)) {
-		v = mfspr(SPRN_HID0);
-		v |= HID0_TBEN;
-		mtspr(SPRN_HID0, v);
-	}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	/*
-	 * Change device bus 2 window so that bootoader can do I/O thru
-	 * 8250/16550 UART that's mapped in that window.
-	 */
-	out_le32(new_base + MV64x60_CPU2DEV_2_BASE, EV64260_UART_BASE >> 20);
-	out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, EV64260_UART_END >> 20);
-	__asm__ __volatile__("sync");
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	mv64x60_console_baud = EV64260_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src = EV64260_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq = EV64260_MPSC_CLK_FREQ;
-#endif
-}
diff --git a/arch/ppc/boot/simple/misc-ev64360.c b/arch/ppc/boot/simple/misc-ev64360.c
deleted file mode 100644
index 96eaebb78df5..000000000000
--- a/arch/ppc/boot/simple/misc-ev64360.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2005 Lee Nicks <allinux@gmail.com>
- *
- * Based on arch/ppc/boot/simple/misc-katana.c from:
- * Mark A. Greer <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/ev64360.h>
-
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-
-/* Not in the kernel so won't include kernel.h to get its 'min' definition */
-#ifndef min
-#define	min(a,b)	(((a) < (b)) ? (a) : (b))
-#endif
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	mv64x60_console_baud  = EV64360_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src  = EV64360_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
-}
diff --git a/arch/ppc/boot/simple/misc-katana.c b/arch/ppc/boot/simple/misc-katana.c
deleted file mode 100644
index 79a1bbcbc6c5..000000000000
--- a/arch/ppc/boot/simple/misc-katana.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Set up MPSC values to bootwrapper can prompt user.
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2004 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/katana.h>
-
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-
-/* Not in the kernel so won't include kernel.h to get its 'min' definition */
-#ifndef min
-#define	min(a,b)	(((a) < (b)) ? (a) : (b))
-#endif
-
-unsigned long mv64360_get_mem_size(void);
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	mv64x60_console_baud = KATANA_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src = KATANA_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq =
-		min(katana_bus_freq((void __iomem *)KATANA_CPLD_BASE),
-			MV64x60_TCLK_FREQ_MAX);
-}
-
-unsigned long
-get_mem_size(void)
-{
-	return mv64360_get_mem_size();
-}
diff --git a/arch/ppc/boot/simple/misc-mv64x60.c b/arch/ppc/boot/simple/misc-mv64x60.c
deleted file mode 100644
index 28b3108083ed..000000000000
--- a/arch/ppc/boot/simple/misc-mv64x60.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Relocate bridge's register base and call board specific routine.
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-
-extern struct bi_record *decompress_kernel(unsigned long load_addr,
-	int num_words, unsigned long cksum);
-
-
-u32 size_reg[MV64x60_CPU2MEM_WINDOWS] = {
-	MV64x60_CPU2MEM_0_SIZE, MV64x60_CPU2MEM_1_SIZE,
-	MV64x60_CPU2MEM_2_SIZE, MV64x60_CPU2MEM_3_SIZE
-};
-
-/* Read mem ctlr to get the amount of mem in system */
-unsigned long
-mv64360_get_mem_size(void)
-{
-	u32	enables, i, v;
-	u32	mem = 0;
-
-	enables = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE +
-		MV64360_CPU_BAR_ENABLE) & 0xf;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
-		if (!(enables & (1<<i))) {
-			v = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE
-				+ size_reg[i]) & 0xffff;
-			v = (v + 1) << 16;
-			mem += v;
-		}
-
-	return mem;
-}
-
-void
-mv64x60_move_base(void __iomem *old_base, void __iomem *new_base)
-{
-	u32	bits, mask, b;
-
-	if (old_base != new_base) {
-#ifdef CONFIG_GT64260
-		bits = 12;
-		mask = 0x07000000;
-#else /* Must be mv64[34]60 */
-		bits = 16;
-		mask = 0x03000000;
-#endif
-		b = in_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE);
-		b &= mask;
-		b |= ((u32)new_base >> (32 - bits));
-		out_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE, b);
-
-		__asm__ __volatile__("sync");
-
-		/* Wait for change to happen (in accordance with the manual) */
-		while (in_le32(new_base + MV64x60_INTERNAL_SPACE_DECODE) != b);
-	}
-}
-
-void __attribute__ ((weak))
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-}
-
-void *
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-	mv64x60_move_base((void __iomem *)CONFIG_MV64X60_BASE,
-		(void __iomem *)CONFIG_MV64X60_NEW_BASE);
-	mv64x60_board_init((void __iomem *)CONFIG_MV64X60_BASE,
-		(void __iomem *)CONFIG_MV64X60_NEW_BASE);
-	return decompress_kernel(load_addr, num_words, cksum);
-}
diff --git a/arch/ppc/boot/simple/misc-prep.c b/arch/ppc/boot/simple/misc-prep.c
deleted file mode 100644
index 0086e1cfb48c..000000000000
--- a/arch/ppc/boot/simple/misc-prep.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Maintainer: Tom Rini <trini@kernel.crashing.org>
- *
- * In the past: Gary Thomas, Cort Dougan <cort@cs.nmt.edu>
- */
-
-#include <linux/pci_ids.h>
-#include <linux/types.h>
-#include <asm/residual.h>
-#include <asm/string.h>
-#include <asm/byteorder.h>
-#include "mpc10x.h"
-#include "of1275.h"
-#include "nonstdio.h"
-
-extern int keyb_present;	/* keyboard controller is present by default */
-RESIDUAL hold_resid_buf;
-RESIDUAL *hold_residual = &hold_resid_buf;
-static void *OFW_interface;	/* Pointer to OF, if available. */
-
-#ifdef CONFIG_VGA_CONSOLE
-char *vidmem = (char *)0xC00B8000;
-int lines = 25, cols = 80;
-int orig_x, orig_y = 24;
-#endif /* CONFIG_VGA_CONSOLE */
-
-extern int CRT_tstc(void);
-extern int vga_init(unsigned char *ISA_mem);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern unsigned long serial_init(int chan, void *ignored);
-extern void serial_fixups(void);
-extern struct bi_record *decompress_kernel(unsigned long load_addr,
-		int num_words, unsigned long cksum);
-extern void disable_6xx_mmu(void);
-extern unsigned long mpc10x_get_mem_size(void);
-
-static void
-writel(unsigned int val, unsigned int address)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	*(unsigned int *)address = cpu_to_le32(val);
-}
-
-#define PCI_CFG_ADDR(dev,off)	((0x80<<24) | (dev<<8) | (off&0xfc))
-#define PCI_CFG_DATA(off)	(MPC10X_MAPA_CNFG_DATA+(off&3))
-
-static void
-pci_read_config_32(unsigned char devfn,
-		unsigned char offset,
-		unsigned int *val)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	*(unsigned int *)PCI_CFG_ADDR(devfn,offset) =
-		cpu_to_le32(MPC10X_MAPA_CNFG_ADDR);
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	*val = le32_to_cpu(*(unsigned int *)PCI_CFG_DATA(offset));
-	return;
-}
-
-#ifdef CONFIG_VGA_CONSOLE
-void
-scroll(void)
-{
-	int i;
-
-	memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
-	for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
-		vidmem[i] = ' ';
-}
-#endif /* CONFIG_VGA_CONSOLE */
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		  RESIDUAL *residual, void *OFW)
-{
-	int start_multi = 0;
-	unsigned int pci_viddid, pci_did, tulip_pci_base, tulip_base;
-
-	/* If we have Open Firmware, initialise it immediately */
-	if (OFW) {
-		OFW_interface = OFW;
-		ofinit(OFW_interface);
-	}
-
-	board_isa_init();
-#if defined(CONFIG_VGA_CONSOLE)
-	vga_init((unsigned char *)0xC0000000);
-#endif /* CONFIG_VGA_CONSOLE */
-
-	if (residual) {
-		/* Is this Motorola PPCBug? */
-		if ((1 & residual->VitalProductData.FirmwareSupports) &&
-		    (1 == residual->VitalProductData.FirmwareSupplier)) {
-			unsigned char base_mod;
-			unsigned char board_type = inb(0x801) & 0xF0;
-
-			/*
-			 * Reset the onboard 21x4x Ethernet
-			 * Motorola Ethernet is at IDSEL 14 (devfn 0x70)
-			 */
-			pci_read_config_32(0x70, 0x00, &pci_viddid);
-			pci_did = (pci_viddid & 0xffff0000) >> 16;
-			/* Be sure we've really found a 21x4x chip */
-			if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_DEC) &&
-				((pci_did == PCI_DEVICE_ID_DEC_TULIP_FAST) ||
-				(pci_did == PCI_DEVICE_ID_DEC_TULIP) ||
-				(pci_did == PCI_DEVICE_ID_DEC_TULIP_PLUS) ||
-				(pci_did == PCI_DEVICE_ID_DEC_21142))) {
-				pci_read_config_32(0x70,
-						0x10,
-						&tulip_pci_base);
-				/* Get the physical base address */
-				tulip_base =
-					(tulip_pci_base & ~0x03UL) + 0x80000000;
-				/* Strobe the 21x4x reset bit in CSR0 */
-				writel(0x1, tulip_base);
-			}
-
-			/* If this is genesis 2 board then check for no
-			 * keyboard controller and more than one processor.
-			 */
-			if (board_type == 0xe0) {
-				base_mod = inb(0x803);
-				/* if a MVME2300/2400 or a Sitka then no keyboard */
-				if((base_mod == 0xFA) || (base_mod == 0xF9) ||
-				   (base_mod == 0xE1)) {
-					keyb_present = 0;	/* no keyboard */
-				}
-			}
-			/* If this is a multiprocessor system then
-			 * park the other processor so that the
-			 * kernel knows where to find them.
-			 */
-			if (residual->MaxNumCpus > 1)
-				start_multi = 1;
-		}
-		memcpy(hold_residual,residual,sizeof(RESIDUAL));
-        }
-
-	/* Call decompress_kernel */
-	decompress_kernel(load_addr, num_words, cksum);
-
-	if (start_multi) {
-		residual->VitalProductData.SmpIar = (unsigned long)0xc0;
-		residual->Cpus[1].CpuState = CPU_GOOD;
-		hold_residual->VitalProductData.Reserved5 = 0xdeadbeef;
-	}
-
-	/* Now go and clear out the BATs and ensure that our MSR is
-	 * correct .*/
-	disable_6xx_mmu();
-
-	/* Make r3 be a pointer to the residual data. */
-	return (unsigned long)hold_residual;
-}
-
-unsigned long
-get_mem_size(void)
-{
-	unsigned int pci_viddid, pci_did;
-
-	/* First, figure out what kind of host bridge we are on.  If it's
-	 * an MPC10x, we can ask it directly how much memory it has.
-	 * Otherwise, see if the residual data has anything.  This isn't
-	 * the best way, but it can be the only way.  If there's nothing,
-	 * assume 32MB. -- Tom.
-	 */
-	/* See what our host bridge is. */
-	pci_read_config_32(0x00, 0x00, &pci_viddid);
-	pci_did = (pci_viddid & 0xffff0000) >> 16;
-	/* See if we are on an MPC10x. */
-	if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA)
-			&& ((pci_did == PCI_DEVICE_ID_MOTOROLA_MPC105)
-				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC106)
-				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC107)))
-		return mpc10x_get_mem_size();
-	/* If it's not, see if we have anything in the residual data. */
-	else if (hold_residual && hold_residual->TotalMemory)
-		return hold_residual->TotalMemory;
-	else if (OFW_interface) {
-		/*
-		 * This is a 'best guess' check.  We want to make sure
-		 * we don't try this on a PReP box without OF
-		 *     -- Cort
-		 */
-		while (OFW_interface)
-		{
-			phandle dev_handle;
-			int mem_info[2];
-
-			/* get handle to memory description */
-			if (!(dev_handle = finddevice("/memory@0")))
-				break;
-
-			/* get the info */
-			if (getprop(dev_handle, "reg", mem_info,
-						sizeof(mem_info)) != 8)
-				break;
-
-			return mem_info[1];
-		}
-	}
-
-	/* Fall back to hard-coding 32MB. */
-	return 32*1024*1024;
-}
diff --git a/arch/ppc/boot/simple/misc-radstone_ppc7d.c b/arch/ppc/boot/simple/misc-radstone_ppc7d.c
deleted file mode 100644
index 0f302ea9c3d1..000000000000
--- a/arch/ppc/boot/simple/misc-radstone_ppc7d.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Misc data for Radstone PPC7D board.
- *
- * Author: James Chapman <jchapman@katalix.com>
- */
-
-#include <linux/types.h>
-#include <platforms/radstone_ppc7d.h>
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-#endif
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	mv64x60_console_baud = PPC7D_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src = PPC7D_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq = PPC7D_MPSC_CLK_FREQ;
-#endif
-}
diff --git a/arch/ppc/boot/simple/misc-spruce.c b/arch/ppc/boot/simple/misc-spruce.c
deleted file mode 100644
index 5b3a6c6f113b..000000000000
--- a/arch/ppc/boot/simple/misc-spruce.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Misc. bootloader code for IBM Spruce reference platform
- *
- * Authors: Johnnie Peters <jpeters@mvista.com>
- *	    Matt Porter <mporter@mvista.com>
- *
- * Derived from arch/ppc/boot/prep/misc.c
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/bootinfo.h>
-
-extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
-				       unsigned long cksum);
-
-/* Define some important locations of the Spruce. */
-#define SPRUCE_PCI_CONFIG_ADDR	0xfec00000
-#define SPRUCE_PCI_CONFIG_DATA	0xfec00004
-
-/* PCI configuration space access routines. */
-unsigned int *pci_config_address = (unsigned int *)SPRUCE_PCI_CONFIG_ADDR;
-unsigned char *pci_config_data   = (unsigned char *)SPRUCE_PCI_CONFIG_DATA;
-
-void cpc700_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned char *val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	*val= (in_le32((unsigned *)pci_config_data) >> (8 * (offset & 3))) & 0xff;
-}
-
-void cpc700_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned char val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	out_8(pci_config_data + (offset&3), val);
-}
-
-void cpc700_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned short *val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	*val= in_le16((unsigned short *)(pci_config_data + (offset&3)));
-}
-
-void cpc700_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned short val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	out_le16((unsigned short *)(pci_config_data + (offset&3)), val);
-}
-
-void cpc700_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned int *val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	*val= in_le32((unsigned *)pci_config_data);
-}
-
-void cpc700_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned int val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	out_le32((unsigned *)pci_config_data, val);
-}
-
-#define PCNET32_WIO_RDP		0x10
-#define PCNET32_WIO_RAP		0x12
-#define PCNET32_WIO_RESET	0x14
-
-#define PCNET32_DWIO_RDP	0x10
-#define PCNET32_DWIO_RAP	0x14
-#define PCNET32_DWIO_RESET	0x18
-
-/* Processor interface config register access */
-#define PIFCFGADDR 0xff500000
-#define PIFCFGDATA 0xff500004
-
-#define PLBMIFOPT 0x18 /* PLB Master Interface Options */
-
-#define MEM_MBEN	0x24
-#define MEM_TYPE	0x28
-#define MEM_B1SA	0x3c
-#define MEM_B1EA	0x5c
-#define MEM_B2SA	0x40
-#define MEM_B2EA	0x60
-
-unsigned long
-get_mem_size(void)
-{
-	int loop;
-	unsigned long mem_size = 0;
-	unsigned long mem_mben;
-	unsigned long mem_type;
-	unsigned long mem_start;
-	unsigned long mem_end;
-	volatile int *mem_addr = (int *)0xff500008;
-	volatile int *mem_data = (int *)0xff50000c;
-
-	/* Get the size of memory from the memory controller. */
-	*mem_addr = MEM_MBEN;
-	asm("sync");
-	mem_mben = *mem_data;
-	asm("sync");
-	for(loop = 0; loop < 1000; loop++);
-
-	*mem_addr = MEM_TYPE;
-	asm("sync");
-	mem_type = *mem_data;
-	asm("sync");
-	for(loop = 0; loop < 1000; loop++);
-
-	*mem_addr = MEM_TYPE;
-	/* Confirm bank 1 has DRAM memory */
-	if ((mem_mben & 0x40000000) &&
-				((mem_type & 0x30000000) == 0x10000000)) {
-		*mem_addr = MEM_B1SA;
-		asm("sync");
-		mem_start = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		*mem_addr = MEM_B1EA;
-		asm("sync");
-		mem_end = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		mem_size = mem_end - mem_start + 0x100000;
-	}
-
-	/* Confirm bank 2 has DRAM memory */
-	if ((mem_mben & 0x20000000) &&
-				((mem_type & 0xc000000) == 0x4000000)) {
-		*mem_addr = MEM_B2SA;
-		asm("sync");
-		mem_start = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		*mem_addr = MEM_B2EA;
-		asm("sync");
-		mem_end = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		mem_size += mem_end - mem_start + 0x100000;
-	}
-	return mem_size;
-}
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-	int csr0;
-	int csr_id;
-	int pci_devfn;
-	int found_multi = 0;
-	unsigned short vendor;
-	unsigned short device;
-	unsigned short command;
-	unsigned char header_type;
-	unsigned int bar0;
-	volatile int *pif_addr = (int *)0xff500000;
-	volatile int *pif_data = (int *)0xff500004;
-
-	/*
-	 * Gah, these firmware guys need to learn that hardware
-	 * byte swapping is evil! Disable all hardware byte
-	 * swapping so it doesn't hurt anyone.
-	 */
-	*pif_addr = PLBMIFOPT;
-	asm("sync");
-	*pif_data = 0x00000000;
-	asm("sync");
-
-	/* Search out and turn off the PcNet ethernet boot device. */
-	for (pci_devfn = 1; pci_devfn < 0xff; pci_devfn++) {
-		if (PCI_FUNC(pci_devfn) && !found_multi)
-			continue;
-
-		cpc700_pcibios_read_config_byte(0, pci_devfn,
-				PCI_HEADER_TYPE, &header_type);
-
-		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
-
-		cpc700_pcibios_read_config_word(0, pci_devfn, PCI_VENDOR_ID,
-				&vendor);
-
-		if (vendor != 0xffff) {
-			cpc700_pcibios_read_config_word(0, pci_devfn,
-						PCI_DEVICE_ID, &device);
-
-			/* If this PCI device is the Lance PCNet board then turn it off */
-			if ((vendor == PCI_VENDOR_ID_AMD) &&
-					(device == PCI_DEVICE_ID_AMD_LANCE)) {
-
-				/* Turn on I/O Space on the board. */
-				cpc700_pcibios_read_config_word(0, pci_devfn,
-						PCI_COMMAND, &command);
-				command |= 0x1;
-				cpc700_pcibios_write_config_word(0, pci_devfn,
-						PCI_COMMAND, command);
-
-				/* Get the I/O space address */
-				cpc700_pcibios_read_config_dword(0, pci_devfn,
-						PCI_BASE_ADDRESS_0, &bar0);
-				bar0 &= 0xfffffffe;
-
-				/* Reset the PCNet Board */
-				inl (bar0+PCNET32_DWIO_RESET);
-				inw (bar0+PCNET32_WIO_RESET);
-
-				/* First do a work oriented read of csr0.  If the value is
-				 * 4 then this is the correct mode to access the board.
-				 * If not try a double word ortiented read.
-				 */
-				outw(0, bar0 + PCNET32_WIO_RAP);
-				csr0 = inw(bar0 + PCNET32_WIO_RDP);
-
-				if (csr0 == 4) {
-					/* Check the Chip id register */
-					outw(88, bar0 + PCNET32_WIO_RAP);
-					csr_id = inw(bar0 + PCNET32_WIO_RDP);
-
-					if (csr_id) {
-						/* This is the valid mode - set the stop bit */
-						outw(0, bar0 + PCNET32_WIO_RAP);
-						outw(csr0, bar0 + PCNET32_WIO_RDP);
-					}
-				} else {
-					outl(0, bar0 + PCNET32_DWIO_RAP);
-					csr0 = inl(bar0 + PCNET32_DWIO_RDP);
-					if (csr0 == 4) {
-						/* Check the Chip id register */
-						outl(88, bar0 + PCNET32_WIO_RAP);
-						csr_id = inl(bar0 + PCNET32_WIO_RDP);
-
-						if (csr_id) {
-							/* This is the valid mode  - set the stop bit*/
-							outl(0, bar0 + PCNET32_WIO_RAP);
-							outl(csr0, bar0 + PCNET32_WIO_RDP);
-						}
-					}
-				}
-			}
-		}
-	}
-
-	return decompress_kernel(load_addr, num_words, cksum);
-}
diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c
deleted file mode 100644
index c3d3305eb5ca..000000000000
--- a/arch/ppc/boot/simple/misc.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * Misc. bootloader code for many machines.  This assumes you have are using
- * a 6xx/7xx/74xx CPU in your machine.  This assumes the chunk of memory
- * below 8MB is free.  Finally, it assumes you have a NS16550-style uart for
- * your serial console.  If a machine meets these requirements, it can quite
- * likely use this code during boot.
- *
- * Author: Matt Porter <mporter@mvista.com>
- * Derived from arch/ppc/boot/prep/misc.c
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/bootinfo.h>
-#ifdef CONFIG_4xx
-#include <asm/ibm4xx.h>
-#endif
-#include <asm/reg.h>
-
-#include "nonstdio.h"
-
-/* Default cmdline */
-#ifdef CONFIG_CMDLINE
-#define CMDLINE CONFIG_CMDLINE
-#else
-#define CMDLINE ""
-#endif
-
-/* Keyboard (and VGA console)? */
-#ifdef CONFIG_VGA_CONSOLE
-#define HAS_KEYB 1
-#else
-#define HAS_KEYB 0
-#endif
-
-/* Will / Can the user give input?
- */
-#if (defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_VGA_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE))
-#define INTERACTIVE_CONSOLE	1
-#endif
-
-char *avail_ram;
-char *end_avail;
-char *zimage_start;
-char cmd_preset[] = CMDLINE;
-char cmd_buf[256];
-char *cmd_line = cmd_buf;
-int keyb_present = HAS_KEYB;
-int zimage_size;
-
-unsigned long com_port;
-unsigned long initrd_size = 0;
-
-/* The linker tells us various locations in the image */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _end[];
-/* Original location */
-extern unsigned long start;
-
-extern int CRT_tstc(void);
-extern unsigned long serial_init(int chan, void *ignored);
-extern void serial_close(unsigned long com_port);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void serial_fixups(void);
-
-/* Allow get_mem_size to be hooked into.  This is the default. */
-unsigned long __attribute__ ((weak))
-get_mem_size(void)
-{
-	return 0;
-}
-
-#if defined(CONFIG_40x)
-#define PPC4xx_EMAC0_MR0	EMAC0_BASE
-#endif
-
-#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
-#define PPC4xx_EMAC0_MR0	PPC44x_EMAC0_MR0
-#endif
-
-struct bi_record *
-decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
-{
-#ifdef INTERACTIVE_CONSOLE
-	int timer = 0;
-	char ch;
-#endif
-	char *cp;
-	struct bi_record *rec;
-	unsigned long initrd_loc = 0, TotalMemory = 0;
-
-#if defined(CONFIG_SERIAL_8250_CONSOLE) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	com_port = serial_init(0, NULL);
-#endif
-
-#if defined(PPC4xx_EMAC0_MR0)
-	/* Reset MAL */
-	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
-	/* Wait for reset */
-	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
-	/* Reset EMAC */
-	*(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;
-	__asm__ __volatile__("eieio");
-#endif
-
-	/*
-	 * Call get_mem_size(), which is memory controller dependent,
-	 * and we must have the correct file linked in here.
-	 */
-	TotalMemory = get_mem_size();
-
-	/* assume the chunk below 8M is free */
-	end_avail = (char *)0x00800000;
-
-	/*
-	 * Reveal where we were loaded at and where we
-	 * were relocated to.
-	 */
-	puts("loaded at:     "); puthex(load_addr);
-	puts(" "); puthex((unsigned long)(load_addr + (4*num_words)));
-	puts("\n");
-	if ( (unsigned long)load_addr != (unsigned long)&start )
-	{
-		puts("relocated to:  "); puthex((unsigned long)&start);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
-		puts("\n");
-	}
-
-	/*
-	 * We link ourself to 0x00800000.  When we run, we relocate
-	 * ourselves there.  So we just need __image_begin for the
-	 * start. -- Tom
-	 */
-	zimage_start = (char *)(unsigned long)(&__image_begin);
-	zimage_size = (unsigned long)(&__image_end) -
-			(unsigned long)(&__image_begin);
-
-	initrd_size = (unsigned long)(&__ramdisk_end) -
-		(unsigned long)(&__ramdisk_begin);
-
-	/*
-	 * The zImage and initrd will be between start and _end, so they've
-	 * already been moved once.  We're good to go now. -- Tom
-	 */
-	avail_ram = (char *)PAGE_ALIGN((unsigned long)_end);
-	puts("zimage at:     "); puthex((unsigned long)zimage_start);
-	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
-	puts("\n");
-
-	if ( initrd_size ) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
-	}
-
-#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */
-	avail_ram = (char *)0x00400000;
-#endif
-	end_avail = (char *)0x00800000;
-	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
-	puthex((unsigned long)end_avail); puts("\n");
-
-	if (keyb_present)
-		CRT_tstc();  /* Forces keyboard to be initialized */
-
-	/* Display standard Linux/PPC boot prompt for kernel args */
-	puts("\nLinux/PPC load: ");
-	cp = cmd_line;
-	memcpy (cmd_line, cmd_preset, sizeof(cmd_preset));
-	while ( *cp ) putc(*cp++);
-
-#ifdef INTERACTIVE_CONSOLE
-	/*
-	 * If they have a console, allow them to edit the command line.
-	 * Otherwise, don't bother wasting the five seconds.
-	 */
-	while (timer++ < 5*1000) {
-		if (tstc()) {
-			while ((ch = getc()) != '\n' && ch != '\r') {
-				/* Test for backspace/delete */
-				if (ch == '\b' || ch == '\177') {
-					if (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				/* Test for ^x/^u (and wipe the line) */
-				} else if (ch == '\030' || ch == '\025') {
-					while (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else {
-					*cp++ = ch;
-					putc(ch);
-				}
-			}
-			break;  /* Exit 'timer' loop */
-		}
-		udelay(1000);  /* 1 msec */
-	}
-	*cp = 0;
-#endif
-	puts("\n");
-
-	puts("Uncompressing Linux...");
-	gunzip(NULL, 0x400000, zimage_start, &zimage_size);
-	puts("done.\n");
-
-	/* get the bi_rec address */
-	rec = bootinfo_addr(zimage_size);
-
-	/* We need to make sure that the initrd and bi_recs do not
-	 * overlap. */
-	if ( initrd_size ) {
-		unsigned long rec_loc = (unsigned long) rec;
-		initrd_loc = (unsigned long)(&__ramdisk_begin);
-		/* If the bi_recs are in the middle of the current
-		 * initrd, move the initrd to the next MB
-		 * boundary. */
-		if ((rec_loc > initrd_loc) &&
-				((initrd_loc + initrd_size) > rec_loc)) {
-			initrd_loc = _ALIGN((unsigned long)(zimage_size)
-					+ (2 << 20) - 1, (2 << 20));
-		 	memmove((void *)initrd_loc, &__ramdisk_begin,
-				 initrd_size);
-	         	puts("initrd moved:  "); puthex(initrd_loc);
-		 	puts(" "); puthex(initrd_loc + initrd_size);
-		 	puts("\n");
-		}
-	}
-
-	bootinfo_init(rec);
-	if ( TotalMemory )
-		bootinfo_append(BI_MEMSIZE, sizeof(int), (void*)&TotalMemory);
-
-	bootinfo_append(BI_CMD_LINE, strlen(cmd_line)+1, (void*)cmd_line);
-
-	/* add a bi_rec for the initrd if it exists */
-	if (initrd_size) {
-		unsigned long initrd[2];
-
-		initrd[0] = initrd_loc;
-		initrd[1] = initrd_size;
-
-		bootinfo_append(BI_INITRD, sizeof(initrd), &initrd);
-	}
-	puts("Now booting the kernel\n");
-	serial_close(com_port);
-
-	return rec;
-}
-
-void __attribute__ ((weak))
-board_isa_init(void)
-{
-}
-
-/* Allow decompress_kernel to be hooked into.  This is the default. */
-void * __attribute__ ((weak))
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-		board_isa_init();
-		return decompress_kernel(load_addr, num_words, cksum);
-}
diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c
deleted file mode 100644
index 8da8f576031d..000000000000
--- a/arch/ppc/boot/simple/mpc10x_memory.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * A routine to find out how much memory the machine has.
- *
- * Based on:
- * arch/ppc/kernel/mpc10x_common.c
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/pci.h>
-#include <asm/types.h>
-#include <asm/io.h>
-#include "mpc10x.h"
-
-/*
- * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
- */
-
-/*
- * PCI config space macros, similar to indirect_xxx and early_xxx macros.
- * We assume bus 0.
- */
-#define MPC10X_CFG_read(val, addr, type, op)	*val = op((type)(addr))
-#define MPC10X_CFG_write(val, addr, type, op)	op((type *)(addr), (val))
-
-#define MPC10X_PCI_OP(rw, size, type, op, mask)			 	\
-static void								\
-mpc10x_##rw##_config_##size(unsigned int __iomem *cfg_addr, 			\
-		unsigned int *cfg_data, int devfn, int offset,		\
-		type val)						\
-{									\
-	out_be32(cfg_addr, 						\
-		 ((offset & 0xfc) << 24) | (devfn << 16)		\
-		 | (0 << 8) | 0x80);					\
-	MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op);	\
-	return;    					 		\
-}
-
-MPC10X_PCI_OP(read, byte,  u8 *, in_8, 3)
-MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0)
-
-/*
- * Read the memory controller registers to determine the amount of memory in
- * the system.  This assumes that the firmware has correctly set up the memory
- * controller registers.  On CONFIG_PPC_PREP, we know we are being called
- * under a PReP memory map. On all other machines, we assume we are under
- * a CHRP memory map.  Further, on CONFIG_PPC_PREP we must rename
- * this function.
- */
-#ifdef CONFIG_PPC_PREP
-#define get_mem_size mpc10x_get_mem_size
-#endif
-unsigned long
-get_mem_size(void)
-{
-	unsigned int *config_addr, *config_data, val;
-	unsigned long start, end, total, offset;
-	int i;
-	unsigned char bank_enables;
-
-#ifdef CONFIG_PPC_PREP
-	config_addr = (unsigned int *)MPC10X_MAPA_CNFG_ADDR;
-	config_data = (unsigned int *)MPC10X_MAPA_CNFG_DATA;
-#else
-	config_addr = (unsigned int *)MPC10X_MAPB_CNFG_ADDR;
-	config_data = (unsigned int *)MPC10X_MAPB_CNFG_DATA;
-#endif
-
-	mpc10x_read_config_byte(config_addr, config_data, PCI_DEVFN(0,0),
-			MPC10X_MCTLR_MEM_BANK_ENABLES, &bank_enables);
-
-	total = 0;
-
-	for (i = 0; i < 8; i++) {
-		if (bank_enables & (1 << i)) {
-			offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			start = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			start = (val << 28) | (start << 20);
-
-			offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			end = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			end = (val << 28) | (end << 20) | 0xfffff;
-
-			total += (end - start + 1);
-		}
-	}
-
-	return total;
-}
diff --git a/arch/ppc/boot/simple/mpc52xx_tty.c b/arch/ppc/boot/simple/mpc52xx_tty.c
deleted file mode 100644
index 6955891fb031..000000000000
--- a/arch/ppc/boot/simple/mpc52xx_tty.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Minimal serial functions needed to send messages out a MPC52xx
- * Programmable Serial Controller (PSC).
- *
- * Author: Dale Farnsworth <dfarnsworth@mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/mpc52xx.h>
-#include <asm/mpc52xx_psc.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-
-#ifdef MPC52xx_PF_CONSOLE_PORT
-#define MPC52xx_CONSOLE MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT)
-#define MPC52xx_PSC_CONFIG_SHIFT ((MPC52xx_PF_CONSOLE_PORT-1)<<2)
-#else
-#error "MPC52xx_PF_CONSOLE_PORT not defined"
-#endif
-
-static struct mpc52xx_psc __iomem *psc =
-	(struct mpc52xx_psc __iomem *) MPC52xx_PA(MPC52xx_CONSOLE);
-
-/* The decrementer counts at the system bus clock frequency
- * divided by four.  The most accurate time base is connected to the
- * rtc.  We read the decrementer change during one rtc tick
- * and multiply by 4 to get the system bus clock frequency. Since a
- * rtc tick is one seconds, and that's pretty long, we change the rtc
- * dividers temporarily to set them 64x faster ;)
- */
-static int
-mpc52xx_ipbfreq(void)
-{
-	struct mpc52xx_rtc __iomem *rtc =
-		(struct mpc52xx_rtc __iomem *) MPC52xx_PA(MPC52xx_RTC_OFFSET);
-	struct mpc52xx_cdm __iomem *cdm =
-		(struct mpc52xx_cdm __iomem *) MPC52xx_PA(MPC52xx_CDM_OFFSET);
-	int current_time, previous_time;
-	int tbl_start, tbl_end;
-	int xlbfreq, ipbfreq;
-
-	out_be32(&rtc->dividers, 0x8f1f0000);	/* Set RTC 64x faster */
-	previous_time = in_be32(&rtc->time);
-	while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-	tbl_start = get_tbl();
-	previous_time = current_time;
-	while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-	tbl_end = get_tbl();
-	out_be32(&rtc->dividers, 0xffff0000);   /* Restore RTC */
-
-	xlbfreq = (tbl_end - tbl_start) << 8;
-	ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ? xlbfreq / 2 : xlbfreq;
-
-	return ipbfreq;
-}
-
-unsigned long
-serial_init(int ignored, void *ignored2)
-{
-	struct mpc52xx_gpio __iomem *gpio =
-		(struct mpc52xx_gpio __iomem *) MPC52xx_PA(MPC52xx_GPIO_OFFSET);
-	int divisor;
-	int mode1;
-	int mode2;
-	u32 val32;
-
-	static int been_here = 0;
-
-	if (been_here)
-		return 0;
-
-	been_here = 1;
-
-	val32 = in_be32(&gpio->port_config);
-	val32 &= ~(0x7 << MPC52xx_PSC_CONFIG_SHIFT);
-	val32 |= MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD
-				<< MPC52xx_PSC_CONFIG_SHIFT;
-	out_be32(&gpio->port_config, val32);
-
-	out_8(&psc->command, MPC52xx_PSC_RST_TX
-			| MPC52xx_PSC_RX_DISABLE | MPC52xx_PSC_TX_ENABLE);
-	out_8(&psc->command, MPC52xx_PSC_RST_RX);
-
-	out_be32(&psc->sicr, 0x0);
-	out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
-	out_be16(&psc->tfalarm, 0xf8);
-
-	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1
-			| MPC52xx_PSC_RX_ENABLE
-			| MPC52xx_PSC_TX_ENABLE);
-
-	divisor = ((mpc52xx_ipbfreq()
-			/ (CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD * 16)) + 1) >> 1;
-
-	mode1 = MPC52xx_PSC_MODE_8_BITS | MPC52xx_PSC_MODE_PARNONE
-			| MPC52xx_PSC_MODE_ERR;
-	mode2 = MPC52xx_PSC_MODE_ONE_STOP;
-
-	out_8(&psc->ctur, divisor>>8);
-	out_8(&psc->ctlr, divisor);
-	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
-	out_8(&psc->mode, mode1);
-	out_8(&psc->mode, mode2);
-
-	return 0;	/* ignored */
-}
-
-void
-serial_putc(void *ignored, const char c)
-{
-	serial_init(0, NULL);
-
-	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ;
-	out_8(&psc->mpc52xx_psc_buffer_8, c);
-	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ;
-}
-
-char
-serial_getc(void *ignored)
-{
-	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY)) ;
-
-	return in_8(&psc->mpc52xx_psc_buffer_8);
-}
-
-int
-serial_tstc(void *ignored)
-{
-	return (in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY) != 0;
-}
diff --git a/arch/ppc/boot/simple/mv64x60_tty.c b/arch/ppc/boot/simple/mv64x60_tty.c
deleted file mode 100644
index 8a735787a6e9..000000000000
--- a/arch/ppc/boot/simple/mv64x60_tty.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Bootloader version of the embedded MPSC/UART driver for the Marvell 64x60.
- * Note: Due to a GT64260A erratum, DMA will be used for UART input (via SDMA).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/* This code assumes that the data cache has been disabled (L1, L2, L3). */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <mpsc_defs.h>
-
-#ifdef CONFIG_EV64360
-#include <platforms/ev64360.h>
-u32	mv64x60_console_baud = EV64360_DEFAULT_BAUD;
-u32	mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; /* TCLK */
-u32	mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
-#else
-u32	mv64x60_console_baud = 9600;
-u32	mv64x60_mpsc_clk_src = 8; /* TCLK */
-u32	mv64x60_mpsc_clk_freq = 100000000;
-#endif
-
-extern void udelay(long);
-static void stop_dma(int chan);
-
-static void __iomem *mv64x60_base = (void __iomem *)CONFIG_MV64X60_NEW_BASE;
-
-struct sdma_regs {
-	u32	sdc;
-	u32	sdcm;
-	u32	rx_desc;
-	u32	rx_buf_ptr;
-	u32	scrdp;
-	u32	tx_desc;
-	u32	sctdp;
-	u32	sftdp;
-};
-
-static struct sdma_regs	sdma_regs[2];
-
-#define	SDMA_REGS_INIT(s, reg_base) {			\
-	(s)->sdc	= (reg_base) + SDMA_SDC;	\
-	(s)->sdcm	= (reg_base) + SDMA_SDCM;	\
-	(s)->rx_desc	= (reg_base) + SDMA_RX_DESC;	\
-	(s)->rx_buf_ptr = (reg_base) + SDMA_RX_BUF_PTR;	\
-	(s)->scrdp	= (reg_base) + SDMA_SCRDP;	\
-	(s)->tx_desc	= (reg_base) + SDMA_TX_DESC;	\
-	(s)->sctdp	= (reg_base) + SDMA_SCTDP;	\
-	(s)->sftdp	= (reg_base) + SDMA_SFTDP;	\
-}
-
-static u32	mpsc_base[2] = { MV64x60_MPSC_0_OFFSET, MV64x60_MPSC_1_OFFSET };
-
-struct mv64x60_rx_desc {
-	u16	bufsize;
-	u16	bytecnt;
-	u32	cmd_stat;
-	u32	next_desc_ptr;
-	u32	buffer;
-};
-
-struct mv64x60_tx_desc {
-	u16	bytecnt;
-	u16	shadow;
-	u32	cmd_stat;
-	u32	next_desc_ptr;
-	u32	buffer;
-};
-
-#define	MAX_RESET_WAIT	10000
-#define	MAX_TX_WAIT	10000
-
-#define	RX_NUM_DESC	2
-#define	TX_NUM_DESC	2
-
-#define	RX_BUF_SIZE	32
-#define	TX_BUF_SIZE	32
-
-static struct mv64x60_rx_desc rd[2][RX_NUM_DESC] __attribute__ ((aligned(32)));
-static struct mv64x60_tx_desc td[2][TX_NUM_DESC] __attribute__ ((aligned(32)));
-
-static char rx_buf[2][RX_NUM_DESC * RX_BUF_SIZE] __attribute__ ((aligned(32)));
-static char tx_buf[2][TX_NUM_DESC * TX_BUF_SIZE] __attribute__ ((aligned(32)));
-
-static int cur_rd[2] = { 0, 0 };
-static int cur_td[2] = { 0, 0 };
-
-static char chan_initialized[2] = { 0, 0 };
-
-
-#define	RX_INIT_RDP(rdp) {			\
-	(rdp)->bufsize = 2;			\
-	(rdp)->bytecnt = 0;			\
-	(rdp)->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F |	\
-		SDMA_DESC_CMDSTAT_O;	\
-}
-
-#ifdef CONFIG_MV64360
-static u32 cpu2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = {
-		{ MV64x60_CPU2MEM_0_BASE, MV64x60_CPU2MEM_0_SIZE },
-		{ MV64x60_CPU2MEM_1_BASE, MV64x60_CPU2MEM_1_SIZE },
-		{ MV64x60_CPU2MEM_2_BASE, MV64x60_CPU2MEM_2_SIZE },
-		{ MV64x60_CPU2MEM_3_BASE, MV64x60_CPU2MEM_3_SIZE }
-};
-
-static u32 com2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = {
-		{ MV64360_MPSC2MEM_0_BASE, MV64360_MPSC2MEM_0_SIZE },
-		{ MV64360_MPSC2MEM_1_BASE, MV64360_MPSC2MEM_1_SIZE },
-		{ MV64360_MPSC2MEM_2_BASE, MV64360_MPSC2MEM_2_SIZE },
-		{ MV64360_MPSC2MEM_3_BASE, MV64360_MPSC2MEM_3_SIZE }
-};
-
-static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] = { 0xe, 0xd, 0xb, 0x7 };
-#endif
-
-unsigned long
-serial_init(int chan, void *ignored)
-{
-	u32		mpsc_routing_base, sdma_base, brg_bcr, cdv;
-	int		i;
-
-	chan = (chan == 1); /* default to chan 0 if anything but 1 */
-
-	if (chan_initialized[chan])
-		return chan;
-
-	chan_initialized[chan] = 1;
-
-	if (chan == 0) {
-		sdma_base = MV64x60_SDMA_0_OFFSET;
-		brg_bcr = MV64x60_BRG_0_OFFSET + BRG_BCR;
-		SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_0_OFFSET);
-	} else {
-		sdma_base = MV64x60_SDMA_1_OFFSET;
-		brg_bcr = MV64x60_BRG_1_OFFSET + BRG_BCR;
-		SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_1_OFFSET);
-	}
-
-	mpsc_routing_base = MV64x60_MPSC_ROUTING_OFFSET;
-
-	stop_dma(chan);
-
-	/* Set up ring buffers */
-	for (i=0; i<RX_NUM_DESC; i++) {
-		RX_INIT_RDP(&rd[chan][i]);
-		rd[chan][i].buffer = (u32)&rx_buf[chan][i * RX_BUF_SIZE];
-		rd[chan][i].next_desc_ptr = (u32)&rd[chan][i+1];
-	}
-	rd[chan][RX_NUM_DESC - 1].next_desc_ptr = (u32)&rd[chan][0];
-
-	for (i=0; i<TX_NUM_DESC; i++) {
-		td[chan][i].bytecnt = 0;
-		td[chan][i].shadow = 0;
-		td[chan][i].buffer = (u32)&tx_buf[chan][i * TX_BUF_SIZE];
-		td[chan][i].cmd_stat = SDMA_DESC_CMDSTAT_F|SDMA_DESC_CMDSTAT_L;
-		td[chan][i].next_desc_ptr = (u32)&td[chan][i+1];
-	}
-	td[chan][TX_NUM_DESC - 1].next_desc_ptr = (u32)&td[chan][0];
-
-	/* Set MPSC Routing */
-	out_le32(mv64x60_base + mpsc_routing_base + MPSC_MRR, 0x3ffffe38);
-
-#ifdef CONFIG_GT64260
-	out_le32(mv64x60_base + GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-#else /* Must be MV64360 or MV64460 */
-	{
-	u32	enables, prot_bits, v;
-
-	/* Set up comm unit to memory mapping windows */
-	/* Note: Assumes MV64x60_CPU2MEM_WINDOWS == 4 */
-
-	enables = in_le32(mv64x60_base + MV64360_CPU_BAR_ENABLE) & 0xf;
-	prot_bits = 0;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		if (!(enables & (1 << i))) {
-			v = in_le32(mv64x60_base + cpu2mem_tab[i][0]);
-			v = ((v & 0xffff) << 16) | (dram_selects[i] << 8);
-			out_le32(mv64x60_base + com2mem_tab[i][0], v);
-
-			v = in_le32(mv64x60_base + cpu2mem_tab[i][1]);
-			v = (v & 0xffff) << 16;
-			out_le32(mv64x60_base + com2mem_tab[i][1], v);
-
-			prot_bits |= (0x3 << (i << 1)); /* r/w access */
-		}
-	}
-
-	out_le32(mv64x60_base + MV64360_MPSC_0_REMAP, 0);
-	out_le32(mv64x60_base + MV64360_MPSC_1_REMAP, 0);
-	out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_0, prot_bits);
-	out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_1, prot_bits);
-	out_le32(mv64x60_base + MV64360_MPSC2MEM_BAR_ENABLE, enables);
-	}
-#endif
-
-	/* MPSC 0/1 Rx & Tx get clocks BRG0/1 */
-	out_le32(mv64x60_base + mpsc_routing_base + MPSC_RCRR, 0x00000100);
-	out_le32(mv64x60_base + mpsc_routing_base + MPSC_TCRR, 0x00000100);
-
-	/* clear pending interrupts */
-	out_le32(mv64x60_base + MV64x60_SDMA_INTR_OFFSET + SDMA_INTR_MASK, 0);
-
-	out_le32(mv64x60_base + SDMA_SCRDP + sdma_base, (int)&rd[chan][0]);
-	out_le32(mv64x60_base + SDMA_SCTDP + sdma_base,
-		(int)&td[chan][TX_NUM_DESC - 1]);
-	out_le32(mv64x60_base + SDMA_SFTDP + sdma_base,
-		(int)&td[chan][TX_NUM_DESC - 1]);
-
-	out_le32(mv64x60_base + SDMA_SDC + sdma_base,
-		SDMA_SDC_RFT | SDMA_SDC_SFM | SDMA_SDC_BLMR | SDMA_SDC_BLMT |
-		(3 << 12));
-
-	cdv = ((mv64x60_mpsc_clk_freq/(32*mv64x60_console_baud))-1);
-	out_le32(mv64x60_base + brg_bcr,
-		((mv64x60_mpsc_clk_src << 18) | (1 << 16) | cdv));
-
-	/* Put MPSC into UART mode, no null modem, 16x clock mode */
-	out_le32(mv64x60_base + MPSC_MMCRL + mpsc_base[chan], 0x000004c4);
-	out_le32(mv64x60_base + MPSC_MMCRH + mpsc_base[chan], 0x04400400);
-
-	out_le32(mv64x60_base + MPSC_CHR_1 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_9 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_10 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_3 + mpsc_base[chan], 4);
-	out_le32(mv64x60_base + MPSC_CHR_4 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_5 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_6 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_7 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_8 + mpsc_base[chan], 0);
-
-	/* 8 data bits, 1 stop bit */
-	out_le32(mv64x60_base + MPSC_MPCR + mpsc_base[chan], (3 << 12));
-	out_le32(mv64x60_base + SDMA_SDCM + sdma_base, SDMA_SDCM_ERD);
-	out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_EH);
-
-	udelay(100);
-
-	return chan;
-}
-
-static void
-stop_dma(int chan)
-{
-	int	i;
-
-	/* Abort MPSC Rx (aborting Tx messes things up) */
-	out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_RA);
-
-	/* Abort SDMA Rx, Tx */
-	out_le32(mv64x60_base + sdma_regs[chan].sdcm,
-		SDMA_SDCM_AR | SDMA_SDCM_STD);
-
-	for (i=0; i<MAX_RESET_WAIT; i++) {
-		if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) &
-				(SDMA_SDCM_AR | SDMA_SDCM_AT)) == 0)
-			break;
-
-		udelay(100);
-	}
-}
-
-static int
-wait_for_ownership(int chan)
-{
-	int	i;
-
-	for (i=0; i<MAX_TX_WAIT; i++) {
-		if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) &
-				SDMA_SDCM_TXD) == 0)
-			break;
-
-		udelay(1000);
-	}
-
-	return (i < MAX_TX_WAIT);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	struct mv64x60_tx_desc	*tdp;
-
-	if (wait_for_ownership(com_port) == 0)
-		return;
-
-	tdp = &td[com_port][cur_td[com_port]];
-	if (++cur_td[com_port] >= TX_NUM_DESC)
-		cur_td[com_port] = 0;
-
-	*(unchar *)(tdp->buffer ^ 7) = c;
-	tdp->bytecnt = 1;
-	tdp->shadow = 1;
-	tdp->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F |
-		SDMA_DESC_CMDSTAT_O;
-
-	out_le32(mv64x60_base + sdma_regs[com_port].sctdp, (int)tdp);
-	out_le32(mv64x60_base + sdma_regs[com_port].sftdp, (int)tdp);
-	out_le32(mv64x60_base + sdma_regs[com_port].sdcm,
-		in_le32(mv64x60_base + sdma_regs[com_port].sdcm) |
-			SDMA_SDCM_TXD);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	struct mv64x60_rx_desc	*rdp;
-	unchar			c = '\0';
-
-	rdp = &rd[com_port][cur_rd[com_port]];
-
-	if ((rdp->cmd_stat & (SDMA_DESC_CMDSTAT_O|SDMA_DESC_CMDSTAT_ES)) == 0) {
-		c = *(unchar *)(rdp->buffer ^ 7);
-		RX_INIT_RDP(rdp);
-		if (++cur_rd[com_port] >= RX_NUM_DESC)
-			cur_rd[com_port] = 0;
-	}
-
-	return c;
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	struct mv64x60_rx_desc	*rdp;
-	int			loop_count = 0;
-	int			rc = 0;
-
-	rdp = &rd[com_port][cur_rd[com_port]];
-
-	/* Go through rcv descs until empty looking for one with data (no error)*/
-	while (((rdp->cmd_stat & SDMA_DESC_CMDSTAT_O) == 0) &&
-		(loop_count++ < RX_NUM_DESC)) {
-
-		/* If there was an error, reinit the desc & continue */
-		if ((rdp->cmd_stat & SDMA_DESC_CMDSTAT_ES) != 0) {
-			RX_INIT_RDP(rdp);
-			if (++cur_rd[com_port] >= RX_NUM_DESC)
-				cur_rd[com_port] = 0;
-			rdp = (struct mv64x60_rx_desc *)rdp->next_desc_ptr;
-		} else {
-			rc = 1;
-			break;
-		}
-	}
-
-	return rc;
-}
-
-void
-serial_close(unsigned long com_port)
-{
-	stop_dma(com_port);
-}
diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c
deleted file mode 100644
index 6ff2701598f2..000000000000
--- a/arch/ppc/boot/simple/openbios.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- *      2005 (c) SYSGO AG - g.jaeger@sysgo.com
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/ppcboot.h>
-#include <asm/ibm4xx.h>
-#include <asm/reg.h>
-#ifdef CONFIG_40x
-#include <asm/io.h>
-#endif
-
-#if defined(CONFIG_BUBINGA)
-#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */
-#else
-#define BOARD_INFO_VECTOR	0xFFFE0B50
-#endif
-
-#ifdef CONFIG_40x
-/* Supply a default Ethernet address for those eval boards that don't
- * ship with one.  This is an address from the MBX board I have, so
- * it is unlikely you will find it on your network.
- */
-static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
-
-extern unsigned long timebase_period_ns;
-#endif /* CONFIG_40x */
-
-extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
-				       unsigned long cksum);
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-typedef struct openbios_board_info {
-        unsigned char    bi_s_version[4];       /* Version of this structure */
-        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */
-        unsigned int     bi_memsize;            /* DRAM installed, in bytes */
-#ifdef CONFIG_405EP
-        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */
-#else /* CONFIG_405EP */
-        unsigned char    bi_enetaddr[6];        /* Local Ethernet MAC address */
-#endif /* CONFIG_405EP */
-        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */
-        unsigned int     bi_intfreq;            /* Processor speed, in Hz */
-        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */
-        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */
-#ifdef CONFIG_405EP
-        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */
-        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
-#endif /* CONFIG_405EP */
-} openbios_bd_t;
-
-void *
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-#ifdef CONFIG_40x
-	openbios_bd_t *openbios_bd = NULL;
-	openbios_bd_t *(*get_board_info)(void) =
-		(openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
-
-	/*
-	 * On 40x platforms we not only need the MAC-addresses, but also the
-	 * clocks and memsize. Now try to get all values using the OpenBIOS
-	 * "get_board_info()" callback.
-	 */
-	if ((openbios_bd = get_board_info()) != NULL) {
-		/*
-		 * Copy bd_info from OpenBIOS struct into U-Boot struct
-		 * used by kernel
-		 */
-	        hold_residual->bi_memsize = openbios_bd->bi_memsize;
-	        hold_residual->bi_intfreq = openbios_bd->bi_intfreq;
-	        hold_residual->bi_busfreq = openbios_bd->bi_busfreq;
-	        hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;
-		memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);
-#ifdef CONFIG_405EP
-		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);
-		memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);
-	        hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;
-	        hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;
-#else /* CONFIG_405EP */
-		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);
-#endif /* CONFIG_405EP */
-	} else {
-		/* Hmmm...better try to stuff some defaults.
-		 */
-		hold_residual->bi_memsize = 16 * 1024 * 1024;
-		hold_residual->bi_intfreq = 200000000;
-		hold_residual->bi_busfreq = 100000000;
-		hold_residual->bi_pci_busfreq = 66666666;
-
-		/*
-		 * Only supply one mac-address in this fallback
-		 */
-		memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);
-#ifdef CONFIG_405EP
-	        hold_residual->bi_opbfreq = 50000000;
-	        hold_residual->bi_procfreq = 200000000;
-#endif /* CONFIG_405EP */
-	}
-
-	timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;
-#endif /* CONFIG_40x */
-
-#ifdef CONFIG_440GP
-	/* simply copy the MAC addresses */
-	memcpy(hold_residual->bi_enetaddr,  (char *)OPENBIOS_MAC_BASE, 6);
-	memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);
-#endif /* CONFIG_440GP */
-
-	decompress_kernel(load_addr, num_words, cksum);
-
-	return (void *)hold_residual;
-}
diff --git a/arch/ppc/boot/simple/pci.c b/arch/ppc/boot/simple/pci.c
deleted file mode 100644
index b0f673c8b7d9..000000000000
--- a/arch/ppc/boot/simple/pci.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* Stand alone funtions for QSpan Tundra support.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/mpc8xx.h>
-
-extern void puthex(unsigned long val);
-extern void puts(const char *);
-
-/* To map PCI devices, you first write 0xffffffff into the device
- * base address registers.  When the register is read back, the
- * number of most significant '1' bits describes the amount of address
- * space needed for mapping.  If the most significant bit is not set,
- * either the device does not use that address register, or it has
- * a fixed address that we can't change.  After the address is assigned,
- * the command register has to be written to enable the card.
- */
-typedef struct {
-	u_char	pci_bus;
-	u_char	pci_devfn;
-	ushort	pci_command;
-	uint	pci_addrs[6];
-} pci_map_t;
-
-/* We should probably dynamically allocate these structures.
-*/
-#define MAX_PCI_DEVS	32
-int	pci_dev_cnt;
-pci_map_t	pci_map[MAX_PCI_DEVS];
-
-void pci_conf_write(int bus, int device, int func, int reg, uint writeval);
-void pci_conf_read(int bus, int device, int func, int reg, void *readval);
-void probe_addresses(int bus, int devfn);
-void map_pci_addrs(void);
-
-extern int
-qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
-			unsigned char offset, unsigned char *val);
-extern int
-qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
-			unsigned char offset, unsigned short *val);
-extern int
-qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
-			 unsigned char offset, unsigned int *val);
-extern int
-qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
-			 unsigned char offset, unsigned char val);
-extern int
-qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
-			 unsigned char offset, unsigned short val);
-extern int
-qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
-			  unsigned char offset, unsigned int val);
-
-
-/* This is a really stripped version of PCI bus scan.  All we are
- * looking for are devices that exist.
- */
-void
-pci_scanner(int addr_probe)
-{
-	unsigned int devfn, l, class, bus_number;
-	unsigned char hdr_type, is_multi;
-
-	is_multi = 0;
-	bus_number = 0;
-	for (devfn = 0; devfn < 0xff; ++devfn) {
-		/* The device numbers are comprised of upper 5 bits of
-		 * device number and lower 3 bits of multi-function number.
-		 */
-		if ((devfn & 7) && !is_multi) {
-			/* Don't scan multifunction addresses if this is
-			 * not a multifunction device.
-			 */
-			continue;
-		}
-
-		/* Read the header to determine card type.
-		*/
-		qs_pci_read_config_byte(bus_number, devfn, PCI_HEADER_TYPE,
-								&hdr_type);
-
-		/* If this is a base device number, check the header to
-		 * determine if it is mulifunction.
-		 */
-		if ((devfn & 7) == 0)
-			is_multi = hdr_type & 0x80;
-
-		/* Check to see if the board is really in the slot.
-		*/
-		qs_pci_read_config_dword(bus_number, devfn, PCI_VENDOR_ID, &l);
-		/* some broken boards return 0 if a slot is empty: */
-		if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff ||
-							l == 0xffff0000) {
-			/* Nothing there.
-			*/
-			is_multi = 0;
-			continue;
-		}
-
-		/* If we are not performing an address probe,
-		 * just simply print out some information.
-		 */
-		if (!addr_probe) {
-			qs_pci_read_config_dword(bus_number, devfn,
-						PCI_CLASS_REVISION, &class);
-
-			class >>= 8;	    /* upper 3 bytes */
-
-#if 0
-			printf("Found (%3d:%d): vendor 0x%04x, device 0x%04x, class 0x%06x\n",
-				(devfn >> 3), (devfn & 7),
-				(l & 0xffff),  (l >> 16) & 0xffff, class);
-#else
-			puts("Found ("); puthex(devfn >> 3);
-			puts(":"); puthex(devfn & 7);
-			puts("): vendor "); puthex(l & 0xffff);
-			puts(", device "); puthex((l >> 16) & 0xffff);
-			puts(", class "); puthex(class); puts("\n");
-#endif
-		}
-		else {
-			/* If this is a "normal" device, build address list.
-			*/
-			if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_NORMAL)
-				probe_addresses(bus_number, devfn);
-		}
-	}
-
-	/* Now map the boards.
-	*/
-	if (addr_probe)
-		map_pci_addrs();
-}
-
-/* Probe addresses for the specified device.  This is a destructive
- * operation because it writes the registers.
- */
-void
-probe_addresses(bus, devfn)
-{
-	int	i;
-	uint	pciaddr;
-	ushort	pcicmd;
-	pci_map_t	*pm;
-
-	if (pci_dev_cnt >= MAX_PCI_DEVS) {
-		puts("Too many PCI devices\n");
-		return;
-	}
-
-	pm = &pci_map[pci_dev_cnt++];
-
-	pm->pci_bus = bus;
-	pm->pci_devfn = devfn;
-
-	for (i=0; i<6; i++) {
-		qs_pci_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4), -1);
-		qs_pci_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4),
-								&pciaddr);
-		pm->pci_addrs[i] = pciaddr;
-		qs_pci_read_config_word(bus, devfn, PCI_COMMAND, &pcicmd);
-		pm->pci_command = pcicmd;
-	}
-}
-
-/* Map the cards into the PCI space.  The PCI has separate memory
- * and I/O spaces.  In addition, some memory devices require mapping
- * below 1M.  The least significant 4 bits of the address register
- * provide information.  If this is an I/O device, only the LS bit
- * is used to indicate that, so I/O devices can be mapped to a two byte
- * boundard.  Memory addresses can be mapped to a 32 byte boundary.
- * The QSpan implementations usually have a 1Gbyte space for each
- * memory and I/O spaces.
- *
- * This isn't a terribly fancy algorithm.  I just map the spaces from
- * the top starting with the largest address space.  When finished,
- * the registers are written and the card enabled.
- *
- * While the Tundra can map a large address space on most boards, we
- * need to be careful because it may overlap other devices (like IMMR).
- */
-#define MEMORY_SPACE_SIZE	0x20000000
-#define IO_SPACE_SIZE		0x20000000
-
-void
-map_pci_addrs()
-{
-	uint	pci_mem_top, pci_mem_low;
-	uint	pci_io_top;
-	uint	addr_mask, reg_addr, space;
-	int	i, j;
-	pci_map_t *pm;
-
-	pci_mem_top = MEMORY_SPACE_SIZE;
-	pci_io_top = IO_SPACE_SIZE;
-	pci_mem_low = (1 * 1024 * 1024);	/* Below one meg addresses */
-
-	/* We can't map anything more than the maximum space, but test
-	 * for it anyway to catch devices out of range.
-	 */
-	addr_mask = 0x80000000;
-
-	do {
-		space = (~addr_mask) + 1;	/* Size of the space */
-		for (i=0; i<pci_dev_cnt; i++) {
-			pm = &pci_map[i];
-			for (j=0; j<6; j++) {
-				/* If the MS bit is not set, this has either
-				 * already been mapped, or is not used.
-				 */
-				reg_addr = pm->pci_addrs[j];
-				if ((reg_addr & 0x80000000) == 0)
-					continue;
-				if (reg_addr & PCI_BASE_ADDRESS_SPACE_IO) {
-					if ((reg_addr & PCI_BASE_ADDRESS_IO_MASK) != addr_mask)
-						continue;
-					if (pci_io_top < space) {
-						puts("Out of PCI I/O space\n");
-					}
-					else {
-						pci_io_top -= space;
-						pm->pci_addrs[j] = pci_io_top;
-						pm->pci_command |= PCI_COMMAND_IO;
-					}
-				}
-				else {
-					if ((reg_addr & PCI_BASE_ADDRESS_MEM_MASK) != addr_mask)
-						continue;
-
-					/* Memory space.  Test if below 1M.
-					*/
-					if (reg_addr & PCI_BASE_ADDRESS_MEM_TYPE_1M) {
-						if (pci_mem_low < space) {
-							puts("Out of PCI 1M space\n");
-						}
-						else {
-							pci_mem_low -= space;
-							pm->pci_addrs[j] = pci_mem_low;
-						}
-					}
-					else {
-						if (pci_mem_top < space) {
-							puts("Out of PCI Mem space\n");
-						}
-						else {
-							pci_mem_top -= space;
-							pm->pci_addrs[j] = pci_mem_top;
-						}
-					}
-					pm->pci_command |= PCI_COMMAND_MEMORY;
-				}
-			}
-		}
-		addr_mask >>= 1;
-		addr_mask |= 0x80000000;
-	} while (addr_mask != 0xfffffffe);
-	
-	/* Now, run the list one more time and map everything.
-	*/
-	for (i=0; i<pci_dev_cnt; i++) {
-		pm = &pci_map[i];
-		for (j=0; j<6; j++) {
-			qs_pci_write_config_dword(pm->pci_bus, pm->pci_devfn,
-				PCI_BASE_ADDRESS_0 + (j * 4), pm->pci_addrs[j]);
-		}
-
-		/* Enable memory or address mapping.
-		*/
-		qs_pci_write_config_word(pm->pci_bus, pm->pci_devfn, PCI_COMMAND,
-			pm->pci_command);
-	}
-}
-
diff --git a/arch/ppc/boot/simple/pibs.c b/arch/ppc/boot/simple/pibs.c
deleted file mode 100644
index f39d01e0619d..000000000000
--- a/arch/ppc/boot/simple/pibs.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * 2004-2005 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <asm/ppcboot.h>
-#include <asm/ibm4xx.h>
-
-extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
-				       unsigned long cksum);
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. - Tom */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-/* String functions lifted from lib/vsprintf.c and lib/ctype.c */
-unsigned char _ctype[] = {
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 0-7 */
-_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C,		/* 8-15 */
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 16-23 */
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 24-31 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P,			/* 32-39 */
-_P,_P,_P,_P,_P,_P,_P,_P,			/* 40-47 */
-_D,_D,_D,_D,_D,_D,_D,_D,			/* 48-55 */
-_D,_D,_P,_P,_P,_P,_P,_P,			/* 56-63 */
-_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U,	/* 64-71 */
-_U,_U,_U,_U,_U,_U,_U,_U,			/* 72-79 */
-_U,_U,_U,_U,_U,_U,_U,_U,			/* 80-87 */
-_U,_U,_U,_P,_P,_P,_P,_P,			/* 88-95 */
-_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L,	/* 96-103 */
-_L,_L,_L,_L,_L,_L,_L,_L,			/* 104-111 */
-_L,_L,_L,_L,_L,_L,_L,_L,			/* 112-119 */
-_L,_L,_L,_P,_P,_P,_P,_C,			/* 120-127 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 128-143 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 144-159 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,   /* 160-175 */
-_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,       /* 176-191 */
-_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,       /* 192-207 */
-_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L,       /* 208-223 */
-_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,       /* 224-239 */
-_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L};      /* 240-255 */
-
-/**
- * simple_strtoull - convert a string to an unsigned long long
- * @cp: The start of the string
- * @endp: A pointer to the end of the parsed string will be placed here
- * @base: The number base to use
- */
-unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base)
-{
-	unsigned long long result = 0,value;
-
-	if (!base) {
-		base = 10;
-		if (*cp == '0') {
-			base = 8;
-			cp++;
-			if ((toupper(*cp) == 'X') && isxdigit(cp[1])) {
-				cp++;
-				base = 16;
-			}
-		}
-	} else if (base == 16) {
-		if (cp[0] == '0' && toupper(cp[1]) == 'X')
-			cp += 2;
-	}
-	while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp)
-	    ? toupper(*cp) : *cp)-'A'+10) < base) {
-		result = result*base + value;
-		cp++;
-	}
-	if (endp)
-		*endp = (char *)cp;
-	return result;
-}
-
-void *
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-	unsigned long long mac64;
-
-	decompress_kernel(load_addr, num_words, cksum);
-
-	mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16);
-	memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6);
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP)
-	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16);
-	memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6);
-#endif
-#ifdef CONFIG_440GX
-	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16);
-	memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6);
-	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16);
-	memcpy(hold_residual->bi_enet3addr, (char *)&mac64+2, 6);
-#endif
-	return (void *)hold_residual;
-}
diff --git a/arch/ppc/boot/simple/prepmap.c b/arch/ppc/boot/simple/prepmap.c
deleted file mode 100644
index c871a4db6e8c..000000000000
--- a/arch/ppc/boot/simple/prepmap.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * 2004 (C) IBM. This file is licensed under the terms of the GNU General
- * Public License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <nonstdio.h>
-
-void board_isa_init(void)
-{
-	ISA_init(0x80000000);
-}
diff --git a/arch/ppc/boot/simple/qspan_pci.c b/arch/ppc/boot/simple/qspan_pci.c
deleted file mode 100644
index d2966d032a4c..000000000000
--- a/arch/ppc/boot/simple/qspan_pci.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * LinuxPPC arch/ppc/kernel/qspan_pci.c   Dan Malek (dmalek@jlc.net)
- *
- * QSpan Motorola bus to PCI bridge.  The config address register
- * is located 0x500 from the base of the bridge control/status registers.
- * The data register is located at 0x504.
- * This is a two step operation.  First, the address register is written,
- * then the data register is read/written as required.
- * I don't know what to do about interrupts (yet).
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/mpc8xx.h>
-
-/*
- * When reading the configuration space, if something does not respond
- * the bus times out and we get a machine check interrupt.  So, the
- * good ol' exception tables come to mind to trap it and return some
- * value.
- *
- * On an error we just return a -1, since that is what the caller wants
- * returned if nothing is present.  I copied this from __get_user_asm,
- * with the only difference of returning -1 instead of EFAULT.
- * There is an associated hack in the machine check trap code.
- *
- * The QSPAN is also a big endian device, that is it makes the PCI
- * look big endian to us.  This presents a problem for the Linux PCI
- * functions, which assume little endian.  For example, we see the
- * first 32-bit word like this:
- *	------------------------
- *	| Device ID | Vendor ID |
- *	------------------------
- * If we read/write as a double word, that's OK.  But in our world,
- * when read as a word, device ID is at location 0, not location 2 as
- * the little endian PCI would believe.  We have to switch bits in
- * the PCI addresses given to us to get the data to/from the correct
- * byte lanes.
- *
- * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
- * It always forces the MS bit to zero.  Therefore, dev_fn values
- * greater than 128 are returned as "no device found" errors.
- *
- * The QSPAN can only perform long word (32-bit) configuration cycles.
- * The "offset" must have the two LS bits set to zero.  Read operations
- * require we read the entire word and then sort out what should be
- * returned.  Write operations other than long word require that we
- * read the long word, update the proper word or byte, then write the
- * entire long word back.
- *
- * PCI Bridge hack.  We assume (correctly) that bus 0 is the primary
- * PCI bus from the QSPAN.  If we are called with a bus number other
- * than zero, we create a Type 1 configuration access that a downstream
- * PCI bridge will interpret.
- */
-
-#define __get_pci_config(x, addr, op)		\
-	__asm__ __volatile__(				\
-		"1:	"op" %0,0(%1)\n"		\
-		"	eieio\n"			\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,-1\n"			\
-		"	b 2b\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,3b\n"			\
-		".text"					\
-		: "=r"(x) : "r"(addr))
-
-#define QS_CONFIG_ADDR	((volatile uint *)(PCI_CSR_ADDR + 0x500))
-#define QS_CONFIG_DATA	((volatile uint *)(PCI_CSR_ADDR + 0x504))
-
-#define mk_config_addr(bus, dev, offset) \
-	(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
-
-#define mk_config_type1(bus, dev, offset) \
-	mk_config_addr(bus, dev, offset) | 1;
-
-/* Initialize the QSpan device registers after power up.
-*/
-void
-qspan_init(void)
-{
-	uint	*qptr;
-
-
-
-	qptr = (uint *)PCI_CSR_ADDR;
-
-	/* PCI Configuration/status.  Upper bits written to clear
-	 * pending interrupt or status.  Lower bits enable QSPAN as
-	 * PCI master, enable memory and I/O cycles, and enable PCI
-	 * parity error checking.
-	 * IMPORTANT:  The last two bits of this word enable PCI
-	 * master cycles into the QBus.  The QSpan is broken and can't
-	 * meet the timing specs of the PQ bus for this to work.  Therefore,
-	 * if you don't have external bus arbitration, you can't use
-	 * this function.
-	 */
-#ifdef EXTERNAL_PQ_ARB
-	qptr[1] = 0xf9000147;
-#else
-	qptr[1] = 0xf9000144;
-#endif
-
-	/* PCI Misc configuration.  Set PCI latency timer resolution
-	 * of 8 cycles, set cache size to 4 x 32.
-	 */
-	qptr[3] = 0;
-
-	/* Set up PCI Target address mapping.  Enable, Posted writes,
-	 * 2Gbyte space (processor memory controller determines actual size).
-	 */
-	qptr[64] = 0x8f000080;
-
-	/* Map processor 0x80000000 to PCI 0x00000000.
-	 * Processor address bit 1 determines I/O type access (0x80000000)
-	 * or memory type access (0xc0000000).
-	 */
-	qptr[65] = 0x80000000;
-
-	/* Enable error logging and clear any pending error status.
-	*/
-	qptr[80] = 0x90000000;
-
-	qptr[512] = 0x000c0003;
-
-	/* Set up Qbus slave image.
-	*/
-	qptr[960] = 0x01000000;
-	qptr[961] = 0x000000d1;
-	qptr[964] = 0x00000000;
-	qptr[965] = 0x000000d1;
-
-}
-
-/* Functions to support PCI bios-like features to read/write configuration
- * space.  If the function fails for any reason, a -1 (0xffffffff) value
- * must be returned.
- */
-#define DEVICE_NOT_FOUND	(-1)
-#define SUCCESSFUL		0
-
-int qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned char *val)
-{
-	uint	temp;
-	u_char	*cp;
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xff;
-		return DEVICE_NOT_FOUND;
-	}
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_pci_config(temp, QS_CONFIG_DATA, "lwz");
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*val = *cp;
-	return SUCCESSFUL;
-}
-
-int qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned short *val)
-{
-	uint	temp;
-	ushort	*sp;
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffff;
-		return DEVICE_NOT_FOUND;
-	}
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_pci_config(temp, QS_CONFIG_DATA, "lwz");
-	offset ^= 0x02;
-
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*val = *sp;
-	return SUCCESSFUL;
-}
-
-int qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned int *val)
-{
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffffffff;
-		return DEVICE_NOT_FOUND;
-	}
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_pci_config(*val, QS_CONFIG_DATA, "lwz");
-	return SUCCESSFUL;
-}
-
-int qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned char val)
-{
-	uint	temp;
-	u_char	*cp;
-
-	if ((bus > 7) || (dev_fn > 127))
-		return DEVICE_NOT_FOUND;
-
-	qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*cp = val;
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-	return SUCCESSFUL;
-}
-
-int qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned short val)
-{
-	uint	temp;
-	ushort	*sp;
-
-	if ((bus > 7) || (dev_fn > 127))
-		return DEVICE_NOT_FOUND;
-
-	qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x02;
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*sp = val;
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-	return SUCCESSFUL;
-}
-
-int qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
-				    unsigned char offset, unsigned int val)
-{
-	if ((bus > 7) || (dev_fn > 127))
-		return DEVICE_NOT_FOUND;
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*(unsigned int *)QS_CONFIG_DATA = val;
-
-	return SUCCESSFUL;
-}
-
diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S
deleted file mode 100644
index 1bbbcd2f2bcb..000000000000
--- a/arch/ppc/boot/simple/relocate.S
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * This is the common part of the loader relocation and initialization
- * process.  All of the board/processor specific initialization is
- * done before we get here.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-#define GETSYM(reg, sym)	\
-	lis	reg, sym@h; ori	reg, reg, sym@l
-
-	.text
-	/* We get called from the early initialization code.
-	 * Register 3 has the address where we were loaded,
-	 * Register 4 contains any residual data passed from the
-	 * boot rom.
-	 */
-	.globl	relocate
-relocate:
-	/* Save r3, r4 for later.
-	 * The r8/r11 are legacy registers so I don't have to
-	 * rewrite the code below :-).
-	 */
-	mr	r8, r3
-	mr	r11, r4
-
-	/* compute the size of the whole image in words. */
-	GETSYM(r4,start)
-	GETSYM(r5,end)
-
-	addi	r5,r5,3		/* round up */
-	sub	r5,r5,r4	/* end - start */
-	srwi	r5,r5,2
-	mr	r7,r5		/* Save for later use. */
-
-	/*
-	 * Check if we need to relocate ourselves to the link addr or were
-	 * we loaded there to begin with.
-	 */
-	cmpw	cr0,r3,r4
-	beq	start_ldr	/* If 0, we don't need to relocate */
-
-	/* Move this code somewhere safe.  This is max(load + size, end)
-	 * r8 == load address
-	 */
-	GETSYM(r4, start)
-	GETSYM(r5, end)
-
-	sub	r6,r5,r4
-	add	r6,r8,r6	/* r6 == phys(load + size) */
-
-	cmpw	r5,r6
-	bgt	1f
-	b	2f
-1:
-	mr	r6, r5
-2:
-	/* dest is in r6 */
-	/* Ensure alignment --- this code is precautionary */
-	addi	r6,r6,4
-	li	r5,0x0003
-	andc	r6,r6,r5
-
-	/* Find physical address and size of do_relocate */
-	GETSYM(r5, __relocate_start)
-	GETSYM(r4, __relocate_end)
-	GETSYM(r3, start)
-
-	/* Size to copy */
-	sub	r4,r4,r5
-	srwi	r4,r4,2
-
-	/* Src addr to copy (= __relocate_start - start + where_loaded) */
-	sub	r3,r5,r3
-	add	r5,r8,r3
-
-	/* Save dest */
-	mr	r3, r6
-
-	/* Do the copy */
-	mtctr	r4
-3:	lwz	r4,0(r5)
-	stw	r4,0(r3)
-	addi	r3,r3,4
-	addi	r5,r5,4
-	bdnz	3b
-
-	GETSYM(r4, __relocate_start)
-	GETSYM(r5, do_relocate)
-
-	sub	r4,r5,r4	/* Get entry point for do_relocate in */
-	add	r6,r6,r4	/* relocated section */
-
-	/* This will return to the relocated do_relocate */
-	mtlr	r6
-	b	flush_instruction_cache
-
-	.section ".relocate_code","xa"
-	
-do_relocate:
-	/* We have 2 cases --- start < load, or start > load
-	 * This determines whether we copy from the end, or the start.
-	 * Its easier to have 2 loops than to have paramaterised
-	 * loops.  Sigh.
-	 */
-	li	r6,0		/* Clear checksum */
-	mtctr	r7		/* Setup for a loop */
-	
-	GETSYM(r4, start)
-	mr	r3,r8		/* Get the load addr */
-
-	cmpw	cr0,r4,r3	/* If we need to copy from the end, do so */
-	bgt	do_relocate_from_end
-
-do_relocate_from_start:
-1:	lwz	r5,0(r3)	/* Load and decrement */
-	stw	r5,0(r4)	/* Store and decrement */
-	addi	r3,r3,4
-	addi	r4,r4,4
-	xor	r6,r6,r5	/* Update checksum */
-	bdnz	1b		/* Are we done? */
-	b	do_relocate_out	/* Finished */
-
-do_relocate_from_end:
-	GETSYM(r3, end)
-	slwi	r4,r7,2
-	add	r4,r8,r4	/* Get the physical end */
-1:	lwzu	r5,-4(r4)
-	stwu	r5, -4(r3)
-	xor	r6,r6,r5
-	bdnz	1b
-
-do_relocate_out:
-	GETSYM(r3,start_ldr)
-	mtlr	r3		/* Easiest way to do an absolute jump */
-/* Some boards don't boot up with the I-cache enabled.  Do that
- * now because the decompress runs much faster that way.
- * As a side effect, we have to ensure the data cache is not enabled
- * so we can access the serial I/O without trouble.
- */
-	b	flush_instruction_cache
-
-	.previous
-
-start_ldr:
-/* Clear all of BSS and set up stack for C calls */
-	lis	r3,__bss_start@h
-	ori	r3,r3,__bss_start@l
-	lis	r4,end@h
-	ori	r4,r4,end@l
-	subi	r3,r3,4
-	subi	r4,r4,4
-	li	r0,0
-50:	stwu	r0,4(r3)
-	cmpw	cr0,r3,r4
-	blt	50b
-90:	mr	r9,r1		/* Save old stack pointer (in case it matters) */
-	lis	r1,.stack@h
-	ori	r1,r1,.stack@l
-	addi	r1,r1,4096*2
-	subi	r1,r1,256
-	li	r2,0x000F	/* Mask pointer to 16-byte boundary */
-	andc	r1,r1,r2
-
-	/*
-	 * Exec kernel loader
-	 */
-	mr	r3,r8		/* Load point */
-	mr	r4,r7		/* Program length */
-	mr	r5,r6		/* Checksum */
-	mr	r6,r11		/* Residual data */
-	mr	r7,r25		/* Validated OFW interface */
-	bl	load_kernel
-
-	/*
-	 * Make sure the kernel knows we don't have things set in
-	 * registers.  -- Tom
-	 */
-	li	r4,0
-	li	r5,0
-	li	r6,0
-
-	/*
-	 * Start at the begining.
-	 */
-#ifdef CONFIG_PPC_PREP
-	li	r9,0xc
-	mtlr	r9
-	/* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD,
-	 * and tell the kernel to start on the 4th instruction since we
-	 * overwrite the first 3 sometimes (which are 'nop').
-	 */
-	lis	r10,0xdeadc0de@h
-	ori	r10,r10,0xdeadc0de@l
-	li	r9,0
-	stw	r10,0(r9)
-#else
-	li	r9,0
-	mtlr	r9
-#endif
-	blr
-
-	.comm	.stack,4096*2,4
diff --git a/arch/ppc/boot/simple/rw4/ppc_40x.h b/arch/ppc/boot/simple/rw4/ppc_40x.h
deleted file mode 100644
index 561fb26f5a93..000000000000
--- a/arch/ppc/boot/simple/rw4/ppc_40x.h
+++ /dev/null
@@ -1,664 +0,0 @@
-/*----------------------------------------------------------------------------+
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
-|
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
-|
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
-|
-|       COPYRIGHT   I B M   CORPORATION 1997
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Author:    Tony J. Cerreto
-| Component: Assembler include file.
-| File:      ppc_40x.h
-| Purpose:   Include file containing PPC DCR defines.
-|
-| Changes:
-| Date       Author  Comment
-| ---------  ------  --------------------------------------------------------
-| 01-Mar-00  tjc     Created
-+----------------------------------------------------------------------------*/
-/* added by linguohui*/
-#define MW
-/*----------------------------------------------------------------------------+
-| PPC Special purpose registers Numbers
-+----------------------------------------------------------------------------*/
-#define ccr0            0x3b3               /* core configuration reg        */
-#define ctr             0x009               /* count register                */
-#define ctrreg          0x009               /* count register                */
-#define dbcr0           0x3f2               /* debug control register 0      */
-#define dbcr1           0x3bd               /* debug control register 1      */
-#define dbsr            0x3f0               /* debug status register         */
-#define dccr            0x3fa               /* data cache control reg.       */
-#define dcwr            0x3ba               /* data cache write-thru reg     */
-#define dear            0x3d5               /* data exception address reg    */
-#define esr             0x3d4               /* exception syndrome register   */
-#define evpr            0x3d6               /* exception vector prefix reg   */
-#define iccr            0x3fb               /* instruction cache cntrl re    */
-#define icdbdr          0x3d3               /* instr cache dbug data reg     */
-#define lrreg           0x008               /* link register                 */
-#define pid             0x3b1               /* process id reg                */
-#define pit             0x3db               /* programmable interval time    */
-#define pvr             0x11f               /* processor version register    */
-#define sgr             0x3b9               /* storage guarded reg           */
-#define sler            0x3bb               /* storage little endian reg     */
-#define sprg0           0x110               /* special general purpose 0     */
-#define sprg1           0x111               /* special general purpose 1     */
-#define sprg2           0x112               /* special general purpose 2     */
-#define sprg3           0x113               /* special general purpose 3     */
-#define sprg4           0x114               /* special general purpose 4     */
-#define sprg5           0x115               /* special general purpose 5     */
-#define sprg6           0x116               /* special general purpose 6     */
-#define sprg7           0x117               /* special general purpose 7     */
-#define srr0            0x01a               /* save/restore register 0       */
-#define srr1            0x01b               /* save/restore register 1       */
-#define srr2            0x3de               /* save/restore register 2       */
-#define srr3            0x3df               /* save/restore register 3       */
-#define tbhi            0x11D
-#define tblo            0x11C
-#define tcr             0x3da               /* timer control register        */
-#define tsr             0x3d8               /* timer status register         */
-#define xerreg          0x001               /* fixed point exception         */
-#define xer             0x001               /* fixed point exception         */
-#define zpr             0x3b0               /* zone protection reg           */
-
-/*----------------------------------------------------------------------------+
-| Decompression Controller
-+----------------------------------------------------------------------------*/
-#define kiar            0x014               /* Decompression cntl addr reg   */
-#define kidr            0x015               /* Decompression cntl data reg   */
-#define kitor0          0x00                /* index table origin Reg 0      */
-#define kitor1          0x01                /* index table origin Reg 1      */
-#define kitor2          0x02                /* index table origin Reg 2      */
-#define kitor3          0x03                /* index table origin Reg 3      */
-#define kaddr0          0x04                /* addr decode Definition Reg 0  */
-#define kaddr1          0x05                /* addr decode Definition Reg 1  */
-#define kconf           0x40                /* Decompression cntl config reg */
-#define kid             0x41                /* Decompression cntl id reg     */
-#define kver            0x42                /* Decompression cntl ver number */
-#define kpear           0x50                /* bus error addr reg (PLB)      */
-#define kbear           0x51                /* bus error addr reg (DCP-EBC)  */
-#define kesr0           0x52                /* bus error status reg 0        */
-
-/*----------------------------------------------------------------------------+
-| Romeo Specific Device Control Register Numbers.
-+----------------------------------------------------------------------------*/
-#ifndef VESTA
-#define cdbcr           0x3d7                   /* cache debug cntrl reg     */
-
-#define a_latcnt        0x1a9                   /* PLB Latency count         */
-#define a_tgval         0x1ac                   /* tone generation value     */
-#define a_plb_pr        0x1bf                   /* PLB priority              */
-
-#define cic_sel1        0x031                   /* select register 1         */
-#define cic_sel2        0x032                   /* select register 2         */
-
-#define clkgcrst        0x122                   /* chip reset register */
-
-#define cp_cpmsr        0x100                   /*rstatus register           */
-#define cp_cpmer        0x101                   /* enable register           */
-
-#define dcp_kiar        0x190                   /* indirect address register */
-#define dcp_kidr        0x191                   /* indirect data register    */
-
-#define hsmc_mcgr       0x1c0                   /* HSMC global register      */
-#define hsmc_mcbesr     0x1c1                   /* bus error status register */
-#define hsmc_mcbear     0x1c2                   /* bus error address register*/
-#define hsmc_mcbr0      0x1c4                   /* SDRAM sub-ctrl bank reg 0 */
-#define hsmc_mccr0      0x1c5                   /* SDRAM sub-ctrl ctrl reg 0 */
-#define hsmc_mcbr1      0x1c7                   /* SDRAM sub-ctrl bank reg 1 */
-#define hsmc_mccr1      0x1c8                   /* SDRAM sub-ctrl ctrl reg 1 */
-#define hsmc_sysr       0x1d1                   /* system register           */
-#define hsmc_data       0x1d2                   /* data register             */
-#define hsmc_mccrr      0x1d3                   /* refresh register          */
-
-#define ocm_pbar        0x1E0                   /* base address register     */
-
-#define plb0_pacr0      0x057                   /* PLB arbiter control reg   */
-#define plb1_pacr1      0x067                   /* PLB arbiter control reg   */
-
-#define v_displb        0x157                   /* set left border of display*/
-#define v_disptb        0x158                   /* top border of display     */
-#define v_osd_la        0x159                   /* first link address for OSD*/
-#define v_ptsdlta       0x15E                   /* PTS delta register        */
-#define v_v0base        0x16C                   /* base mem add for VBI-0    */
-#define v_v1base        0x16D                   /* base mem add for VBI-1    */
-#define v_osbase        0x16E                   /* base mem add for OSD data */
-#endif
-
-/*----------------------------------------------------------------------------+
-| Vesta Device Control Register Numbers.
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Cross bar switch.
-+----------------------------------------------------------------------------*/
-#define cbs0_cr         0x010               /* CBS configuration register    */
-
-/*----------------------------------------------------------------------------+
-| DCR external master (DCRX).
-+----------------------------------------------------------------------------*/
-#define dcrx0_icr       0x020               /* internal control register     */
-#define dcrx0_isr       0x021               /* internal status register      */
-#define dcrx0_ecr       0x022               /* external control register     */
-#define dcrx0_esr       0x023               /* external status register      */
-#define dcrx0_tar       0x024               /* target address register       */
-#define dcrx0_tdr       0x025               /* target data register          */
-#define dcrx0_igr       0x026               /* interrupt generation register */
-#define dcrx0_bcr       0x027               /* buffer control register       */
-
-/*----------------------------------------------------------------------------+
-| Chip interconnect configuration.
-+----------------------------------------------------------------------------*/
-#define cic0_cr         0x030               /* CIC control register          */
-#define cic0_vcr        0x033               /* video macro control reg       */
-#define cic0_sel3       0x035               /* select register 3             */
-
-/*----------------------------------------------------------------------------+
-| Chip interconnect configuration.
-+----------------------------------------------------------------------------*/
-#define sgpo0_sgpO      0x036               /* simplified GPIO output        */
-#define sgpo0_gpod      0x037               /* simplified GPIO open drain    */
-#define sgpo0_gptc      0x038               /* simplified GPIO tristate cntl */
-#define sgpo0_gpi       0x039               /* simplified GPIO input         */
-
-/*----------------------------------------------------------------------------+
-| Universal interrupt controller.
-+----------------------------------------------------------------------------*/
-#define uic0_sr         0x040               /* status register               */
-#define uic0_srs        0x041               /* status register set           */
-#define uic0_er         0x042               /* enable register               */
-#define uic0_cr         0x043               /* critical register             */
-#define uic0_pr         0x044               /* parity register               */
-#define uic0_tr         0x045               /* triggering register           */
-#define uic0_msr        0x046               /* masked status register        */
-#define uic0_vr         0x047               /* vector register               */
-#define uic0_vcr        0x048               /* enable config register        */
-
-/*----------------------------------------------------------------------------+
-| PLB 0 and 1.
-+----------------------------------------------------------------------------*/
-#define pb0_pesr        0x054               /* PLB error status reg 0        */
-#define pb0_pesrs       0x055               /* PLB error status reg 0 set    */
-#define pb0_pear        0x056               /* PLB error address reg         */
-
-#define pb1_pesr        0x064               /* PLB error status reg 1        */
-#define pb1_pesrs       0x065               /* PLB error status reg 1 set    */
-#define pb1_pear        0x066               /* PLB error address reg         */
-
-/*----------------------------------------------------------------------------+
-| EBIU DCR registers.
-+----------------------------------------------------------------------------*/
-#define ebiu0_brcrh0    0x070               /* bus region register 0 high    */
-#define ebiu0_brcrh1    0x071               /* bus region register 1 high    */
-#define ebiu0_brcrh2    0x072               /* bus region register 2 high    */
-#define ebiu0_brcrh3    0x073               /* bus region register 3 high    */
-#define ebiu0_brcrh4    0x074               /* bus region register 4 high    */
-#define ebiu0_brcrh5    0x075               /* bus region register 5 high    */
-#define ebiu0_brcrh6    0x076               /* bus region register 6 high    */
-#define ebiu0_brcrh7    0x077               /* bus region register 7 high    */
-#define ebiu0_brcr0     0x080               /* bus region register 0         */
-#define ebiu0_brcr1     0x081               /* bus region register 1         */
-#define ebiu0_brcr2     0x082               /* bus region register 2         */
-#define ebiu0_brcr3     0x083               /* bus region register 3         */
-#define ebiu0_brcr4     0x084               /* bus region register 4         */
-#define ebiu0_brcr5     0x085               /* bus region register 5         */
-#define ebiu0_brcr6     0x086               /* bus region register 6         */
-#define ebiu0_brcr7     0x087               /* bus region register 7         */
-#define ebiu0_bear      0x090               /* bus error address register    */
-#define ebiu0_besr      0x091               /* bus error syndrome reg        */
-#define ebiu0_besr0s    0x093               /* bus error syndrome reg        */
-#define ebiu0_biucr     0x09a               /* bus interface control reg     */
-
-/*----------------------------------------------------------------------------+
-| OPB bridge.
-+----------------------------------------------------------------------------*/
-#define opbw0_gesr      0x0b0               /* error status reg              */
-#define opbw0_gesrs     0x0b1               /* error status reg              */
-#define opbw0_gear      0x0b2               /* error address reg             */
-
-/*----------------------------------------------------------------------------+
-| DMA.
-+----------------------------------------------------------------------------*/
-#define dma0_cr0        0x0c0               /* DMA channel control reg 0     */
-#define dma0_ct0        0x0c1               /* DMA count register 0          */
-#define dma0_da0        0x0c2               /* DMA destination addr reg 0    */
-#define dma0_sa0        0x0c3               /* DMA source addr register 0    */
-#define dma0_cc0        0x0c4               /* DMA chained count 0           */
-#define dma0_cr1        0x0c8               /* DMA channel control reg 1     */
-#define dma0_ct1        0x0c9               /* DMA count register 1          */
-#define dma0_da1        0x0ca               /* DMA destination addr reg 1    */
-#define dma0_sa1        0x0cb               /* DMA source addr register 1    */
-#define dma0_cc1        0x0cc               /* DMA chained count 1           */
-#define dma0_cr2        0x0d0               /* DMA channel control reg 2     */
-#define dma0_ct2        0x0d1               /* DMA count register 2          */
-#define dma0_da2        0x0d2               /* DMA destination addr reg 2    */
-#define dma0_sa2        0x0d3               /* DMA source addr register 2    */
-#define dma0_cc2        0x0d4               /* DMA chained count 2           */
-#define dma0_cr3        0x0d8               /* DMA channel control reg 3     */
-#define dma0_ct3        0x0d9               /* DMA count register 3          */
-#define dma0_da3        0x0da               /* DMA destination addr reg 3    */
-#define dma0_sa3        0x0db               /* DMA source addr register 3    */
-#define dma0_cc3        0x0dc               /* DMA chained count 3           */
-#define dma0_sr         0x0e0               /* DMA status register           */
-#define dma0_srs        0x0e1               /* DMA status register           */
-#define dma0_s1         0x031               /* DMA select1 register          */
-#define dma0_s2         0x032               /* DMA select2 register          */
-
-/*---------------------------------------------------------------------------+
-| Clock and power management.
-+----------------------------------------------------------------------------*/
-#define cpm0_fr         0x102               /* force register                */
-
-/*----------------------------------------------------------------------------+
-| Serial Clock Control.
-+----------------------------------------------------------------------------*/
-#define ser0_ccr        0x120               /* serial clock control register */
-
-/*----------------------------------------------------------------------------+
-| Audio Clock Control.
-+----------------------------------------------------------------------------*/
-#define aud0_apcr       0x121               /* audio clock ctrl register     */
-
-/*----------------------------------------------------------------------------+
-| DENC.
-+----------------------------------------------------------------------------*/
-#define denc0_idr       0x130               /* DENC ID register              */
-#define denc0_cr1       0x131               /* control register 1            */
-#define denc0_rr1       0x132               /* microvision 1 (reserved 1)    */
-#define denc0_cr2       0x133               /* control register 2            */
-#define denc0_rr2       0x134               /* microvision 2 (reserved 2)    */
-#define denc0_rr3       0x135               /* microvision 3 (reserved 3)    */
-#define denc0_rr4       0x136               /* microvision 4 (reserved 4)    */
-#define denc0_rr5       0x137               /* microvision 5 (reserved 5)    */
-#define denc0_ccdr      0x138               /* closed caption data           */
-#define denc0_cccr      0x139               /* closed caption control        */
-#define denc0_trr       0x13A               /* teletext request register     */
-#define denc0_tosr      0x13B               /* teletext odd field line se    */
-#define denc0_tesr      0x13C               /* teletext even field line s    */
-#define denc0_rlsr      0x13D               /* RGB rhift left register       */
-#define denc0_vlsr      0x13E               /* video level shift register    */
-#define denc0_vsr       0x13F               /* video scaling register        */
-
-/*----------------------------------------------------------------------------+
-| Video decoder.  Suspect 0x179, 0x169, 0x16a, 0x152 (rc).
-+----------------------------------------------------------------------------*/
-#define vid0_ccntl      0x140               /* control decoder operation     */
-#define vid0_cmode      0x141               /* video operational mode        */
-#define vid0_sstc0      0x142               /* STC high order bits 31:0      */
-#define vid0_sstc1      0x143               /* STC low order bit 32          */
-#define vid0_spts0      0x144               /* PTS high order bits 31:0      */
-#define vid0_spts1      0x145               /* PTS low order bit 32          */
-#define vid0_fifo       0x146               /* FIFO data port                */
-#define vid0_fifos      0x147               /* FIFO status                   */
-#define vid0_cmd        0x148               /* send command to decoder       */
-#define vid0_cmdd       0x149               /* port for command params       */
-#define vid0_cmdst      0x14A               /* command status                */
-#define vid0_cmdad      0x14B               /* command address               */
-#define vid0_procia     0x14C               /* instruction store             */
-#define vid0_procid     0x14D               /* data port for I_Store         */
-#define vid0_osdm       0x151               /* OSD mode control              */
-#define vid0_hosti      0x152               /* base interrupt register       */
-#define vid0_mask       0x153               /* interrupt mask register       */
-#define vid0_dispm      0x154               /* operational mode for Disp     */
-#define vid0_dispd      0x155               /* setting for 'Sync' delay      */
-#define vid0_vbctl      0x156               /* VBI                           */
-#define vid0_ttxctl     0x157               /* teletext control              */
-#define vid0_disptb     0x158               /* display left/top border       */
-#define vid0_osdgla     0x159               /* Graphics plane link addr      */
-#define vid0_osdila     0x15A               /* Image plane link addr         */
-#define vid0_rbthr      0x15B               /* rate buffer threshold         */
-#define vid0_osdcla     0x15C               /* Cursor link addr              */
-#define vid0_stcca      0x15D               /* STC common address            */
-#define vid0_ptsctl     0x15F               /* PTS Control                   */
-#define vid0_wprot      0x165               /* write protect for I_Store     */
-#define vid0_vcqa       0x167               /* video clip queued block Ad    */
-#define vid0_vcql       0x168               /* video clip queued block Le    */
-#define vid0_blksz      0x169               /* block size bytes for copy op  */
-#define vid0_srcad      0x16a               /* copy source address bits 6-31 */
-#define vid0_udbas      0x16B               /* base mem add for user data    */
-#define vid0_vbibas     0x16C               /* base mem add for VBI 0/1      */
-#define vid0_osdibas    0x16D               /* Image plane base address      */
-#define vid0_osdgbas    0x16E               /* Graphic plane base address    */
-#define vid0_rbbase     0x16F               /* base mem add for video buf    */
-#define vid0_dramad     0x170               /* DRAM address                  */
-#define vid0_dramdt     0x171               /* data port for DRAM access     */
-#define vid0_dramcs     0x172               /* DRAM command and statusa      */
-#define vid0_vcwa       0x173               /* v clip work address           */
-#define vid0_vcwl       0x174               /* v clip work length            */
-#define vid0_mseg0      0x175               /* segment address 0             */
-#define vid0_mseg1      0x176               /* segment address 1             */
-#define vid0_mseg2      0x177               /* segment address 2             */
-#define vid0_mseg3      0x178               /* segment address 3             */
-#define vid0_fbbase     0x179               /* frame buffer base memory      */
-#define vid0_osdcbas    0x17A               /* Cursor base addr              */
-#define vid0_lboxtb     0x17B               /* top left border               */
-#define vid0_trdly      0x17C               /* transparency gate delay       */
-#define vid0_sbord      0x17D               /* left/top small pict. bord.    */
-#define vid0_zoffs      0x17E               /* hor/ver zoom window           */
-#define vid0_rbsz       0x17F               /* rate buffer size read         */
-
-/*----------------------------------------------------------------------------+
-| Transport demultiplexer.
-+----------------------------------------------------------------------------*/
-#define xpt0_lr         0x180               /* demux location register       */
-#define xpt0_data       0x181               /* demux data register           */
-#define xpt0_ir         0x182               /* demux interrupt register      */
-
-#define xpt0_config1    0x0000              /* configuration 1               */
-#define xpt0_control1   0x0001              /* control 1                     */
-#define xpt0_festat     0x0002              /* Front-end status              */
-#define xpt0_feimask    0x0003              /* Front_end interrupt Mask      */
-#define xpt0_ocmcnfg    0x0004              /* OCM Address                   */
-#define xpt0_settapi    0x0005              /* Set TAP Interrupt             */
-
-#define xpt0_pcrhi      0x0010              /* PCR High                      */
-#define xpt0_pcrlow     0x0011              /* PCR Low                       */
-#define xpt0_lstchi     0x0012              /* Latched STC High              */
-#define xpt0_lstclow    0x0013              /* Latched STC Low               */
-#define xpt0_stchi      0x0014              /* STC High                      */
-#define xpt0_stclow     0x0015              /* STC Low                       */
-#define xpt0_pwm        0x0016              /* PWM                           */
-#define xpt0_pcrstct    0x0017              /* PCR-STC Threshold             */
-#define xpt0_pcrstcd    0x0018              /* PCR-STC Delta                 */
-#define xpt0_stccomp    0x0019              /* STC Compare                   */
-#define xpt0_stccmpd    0x001a              /* STC Compare Disarm            */
-
-#define xpt0_dsstat     0x0048              /* Descrambler Status            */
-#define xpt0_dsimask    0x0049              /* Descrambler Interrupt Mask    */
-
-#define xpt0_vcchng     0x01f0              /* Video Channel Change          */
-#define xpt0_acchng     0x01f1              /* Audio Channel Change          */
-#define xpt0_axenable   0x01fe              /* Aux PID Enables               */
-#define xpt0_pcrpid     0x01ff              /* PCR PID                       */
-
-#define xpt0_config2    0x1000              /* Configuration 2               */
-#define xpt0_pbuflvl    0x1002              /* Packet Buffer Level           */
-#define xpt0_intmask    0x1003              /* Interrupt Mask                */
-#define xpt0_plbcnfg    0x1004              /* PLB Configuration             */
-
-#define xpt0_qint       0x1010              /* Queues Interrupts             */
-#define xpt0_qintmsk    0x1011              /* Queues Interrupts Mask        */
-#define xpt0_astatus    0x1012              /* Audio Status                  */
-#define xpt0_aintmask   0x1013              /* Audio Interrupt Mask          */
-#define xpt0_vstatus    0x1014              /* Video Status                  */
-#define xpt0_vintmask   0x1015              /* Video Interrupt Mask          */
-
-#define xpt0_qbase      0x1020              /* Queue Base                    */
-#define xpt0_bucketq    0x1021              /* Bucket Queue                  */
-#define xpt0_qstops     0x1024              /* Queue Stops                   */
-#define xpt0_qresets    0x1025              /* Queue Resets                  */
-#define xpt0_sfchng     0x1026              /* Section Filter Change         */
-
-/*----------------------------------------------------------------------------+
-| Audio decoder. Suspect 0x1ad, 0x1b4, 0x1a3, 0x1a5 (read/write status)
-+----------------------------------------------------------------------------*/
-#define aud0_ctrl0      0x1a0               /* control 0                     */
-#define aud0_ctrl1      0x1a1               /* control 1                     */
-#define aud0_ctrl2      0x1a2               /* control 2                     */
-#define aud0_cmd        0x1a3               /* command register              */
-#define aud0_isr        0x1a4               /* interrupt status register     */
-#define aud0_imr        0x1a5               /* interrupt mask register       */
-#define aud0_dsr        0x1a6               /* decoder status register       */
-#define aud0_stc        0x1a7               /* system time clock             */
-#define aud0_csr        0x1a8               /* channel status register       */
-#define aud0_lcnt       0x1a9               /* queued address register 2     */
-#define aud0_pts        0x1aa               /* presentation time stamp       */
-#define aud0_tgctrl     0x1ab               /* tone generation control       */
-#define aud0_qlr2       0x1ac               /* queued length register 2      */
-#define aud0_auxd       0x1ad               /* aux data                      */
-#define aud0_strmid     0x1ae               /* stream ID                     */
-#define aud0_qar        0x1af               /* queued address register       */
-#define aud0_dsps       0x1b0               /* DSP status                    */
-#define aud0_qlr        0x1b1               /* queued len address            */
-#define aud0_dspc       0x1b2               /* DSP control                   */
-#define aud0_wlr2       0x1b3               /* working length register 2     */
-#define aud0_instd      0x1b4               /* instruction download          */
-#define aud0_war        0x1b5               /* working address register      */
-#define aud0_seg1       0x1b6               /* segment 1 base register       */
-#define aud0_seg2       0x1b7               /* segment 2 base register       */
-#define aud0_avf        0x1b9               /* audio att value front         */
-#define aud0_avr        0x1ba               /* audio att value rear          */
-#define aud0_avc        0x1bb               /* audio att value center        */
-#define aud0_seg3       0x1bc               /* segment 3 base register       */
-#define aud0_offset     0x1bd               /* offset address                */
-#define aud0_wrl        0x1be               /* working length register       */
-#define aud0_war2       0x1bf               /* working address register 2    */
-
-/*----------------------------------------------------------------------------+
-| High speed memory controller 0 and 1.
-+----------------------------------------------------------------------------*/
-#define hsmc0_gr        0x1e0               /* HSMC global register          */
-#define hsmc0_besr      0x1e1               /* bus error status register     */
-#define hsmc0_bear      0x1e2               /* bus error address register    */
-#define hsmc0_br0       0x1e4               /* SDRAM sub-ctrl bank reg 0     */
-#define hsmc0_cr0       0x1e5               /* SDRAM sub-ctrl ctrl reg 0     */
-#define hsmc0_br1       0x1e7               /* SDRAM sub-ctrl bank reg 1     */
-#define hsmc0_cr1       0x1e8               /* SDRAM sub-ctrl ctrl reg 1     */
-#define hsmc0_sysr      0x1f1               /* system register               */
-#define hsmc0_data      0x1f2               /* data register                 */
-#define hsmc0_crr       0x1f3               /* refresh register              */
-
-#define hsmc1_gr        0x1c0               /* HSMC global register          */
-#define hsmc1_besr      0x1c1               /* bus error status register     */
-#define hsmc1_bear      0x1c2               /* bus error address register    */
-#define hsmc1_br0       0x1c4               /* SDRAM sub-ctrl bank reg 0     */
-#define hsmc1_cr0       0x1c5               /* SDRAM sub-ctrl ctrl reg 0     */
-#define hsmc1_br1       0x1c7               /* SDRAM sub-ctrl bank reg 1     */
-#define hsmc1_cr1       0x1c8               /* SDRAM sub-ctrl ctrl reg 1     */
-#define hsmc1_sysr      0x1d1               /* system register               */
-#define hsmc1_data      0x1d2               /* data register                 */
-#define hsmc1_crr       0x1d3               /* refresh register              */
-
-/*----------------------------------------------------------------------------+
-| Machine State Register bit definitions.
-+----------------------------------------------------------------------------*/
-#define msr_ape         0x00100000
-#define msr_apa         0x00080000
-#define msr_we          0x00040000
-#define msr_ce          0x00020000
-#define msr_ile         0x00010000
-#define msr_ee          0x00008000
-#define msr_pr          0x00004000
-#define msr_me          0x00001000
-#define msr_de          0x00000200
-#define msr_ir          0x00000020
-#define msr_dr          0x00000010
-#define msr_le          0x00000001
-
-/*----------------------------------------------------------------------------+
-| Used during interrupt processing.
-+----------------------------------------------------------------------------*/
-#define stack_reg_image_size            160
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition and other Metaware (EABI) defines.
-+----------------------------------------------------------------------------*/
-#ifdef MW
-
-#define r0              0
-#define r1              1
-#define r2              2
-#define r3              3
-#define r4              4
-#define r5              5
-#define r6              6
-#define r7              7
-#define r8              8
-#define r9              9
-#define r10             10
-#define r11             11
-#define r12             12
-#define r13             13
-#define r14             14
-#define r15             15
-#define r16             16
-#define r17             17
-#define r18             18
-#define r19             19
-#define r20             20
-#define r21             21
-#define r22             22
-#define r23             23
-#define r24             24
-#define r25             25
-#define r26             26
-#define r27             27
-#define r28             28
-#define r29             29
-#define r30             30
-#define r31             31
-
-#define cr0             0
-#define cr1             1
-#define cr2             2
-#define cr3             3
-#define cr4             4
-#define cr5             5
-#define cr6             6
-#define cr7             7
-
-#define function_prolog(func_name)      .text; \
-                                        .align  2; \
-                                        .globl  func_name; \
-                                        func_name:
-#define function_epilog(func_name)      .type func_name,@function; \
-                                        .size func_name,.-func_name
-
-#define function_call(func_name)        bl func_name
-
-#define stack_frame_min                 8
-#define stack_frame_bc                  0
-#define stack_frame_lr                  4
-#define stack_neg_off                   0
-
-#endif
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition and other DIAB (Elf) defines.
-+----------------------------------------------------------------------------*/
-#ifdef ELF_DIAB
-
-fprolog:        macro   f_name
-                .text
-                .align  2
-                .globl  f_name
-f_name:
-                endm
-
-fepilog:        macro   f_name
-                .type   f_name,@function
-                .size   f_name,.-f_name
-                endm
-
-#define function_prolog(func_name)      fprolog func_name
-#define function_epilog(func_name)      fepilog func_name
-#define function_call(func_name)        bl func_name
-
-#define stack_frame_min                 8
-#define stack_frame_bc                  0
-#define stack_frame_lr                  4
-#define stack_neg_off                   0
-
-#endif
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition and other Xlc (XCOFF) defines.
-+----------------------------------------------------------------------------*/
-#ifdef XCOFF
-
-.machine "403ga"
-
-#define r0              0
-#define r1              1
-#define r2              2
-#define r3              3
-#define r4              4
-#define r5              5
-#define r6              6
-#define r7              7
-#define r8              8
-#define r9              9
-#define r10             10
-#define r11             11
-#define r12             12
-#define r13             13
-#define r14             14
-#define r15             15
-#define r16             16
-#define r17             17
-#define r18             18
-#define r19             19
-#define r20             20
-#define r21             21
-#define r22             22
-#define r23             23
-#define r24             24
-#define r25             25
-#define r26             26
-#define r27             27
-#define r28             28
-#define r29             29
-#define r30             30
-#define r31             31
-
-#define cr0             0
-#define cr1             1
-#define cr2             2
-#define cr3             3
-#define cr4             4
-#define cr5             5
-#define cr6             6
-#define cr7             7
-
-#define function_prolog(func_name)      .csect .func_name[PR]; \
-                                        .globl .func_name[PR]; \
-                                        func_name:
-
-#define function_epilog(func_name)      .toc; \
-                                        .csect  func_name[DS]; \
-                                        .globl  func_name[DS]; \
-                                        .long   .func_name[PR]; \
-                                        .long   TOC[tc0]
-
-#define function_call(func_name)        .extern .func_name[PR]; \
-                                        stw     r2,stack_frame_toc(r1); \
-                                        mfspr   r2,sprg0; \
-                                        bl      .func_name[PR]; \
-                                        lwz     r2,stack_frame_toc(r1)
-
-#define stack_frame_min                 56
-#define stack_frame_bc                  0
-#define stack_frame_lr                  8
-#define stack_frame_toc                 20
-#define stack_neg_off                   276
-
-#endif
-#define function_prolog(func_name)      .text; \
-                                        .align  2; \
-                                        .globl  func_name; \
-                                        func_name:
-#define function_epilog(func_name)      .type func_name,@function; \
-                                        .size func_name,.-func_name
-
-#define function_call(func_name)        bl func_name
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition for GNU
-+----------------------------------------------------------------------------*/
-#ifdef _GNU_TOOL
-
-#define function_prolog(func_name)      .globl  func_name; \
-                                        func_name:
-#define function_epilog(func_name)
-
-#endif
diff --git a/arch/ppc/boot/simple/rw4/rw4_init.S b/arch/ppc/boot/simple/rw4/rw4_init.S
deleted file mode 100644
index b1061962e46b..000000000000
--- a/arch/ppc/boot/simple/rw4/rw4_init.S
+++ /dev/null
@@ -1,78 +0,0 @@
-#define VESTA
-#include "ppc_40x.h"
-#
-        .align 2
-        .text
-#
-# added by linguohui
-        .extern   initb_ebiu0, initb_config, hdw_init_finish
-        .extern   initb_hsmc0, initb_hsmc1, initb_cache
-# end added
-       .globl    HdwInit
-#
-HdwInit:
-#
-#-----------------------------------------------------------------------*
-# If we are not executing from the FLASH get out                        *
-#-----------------------------------------------------------------------*
-# SAW keep this or comment out a la Hawthorne?
-# r3 contains NIP when used with Linux
-#        rlwinm r28, r3, 8, 24, 31    # if MSB == 0xFF -> FLASH address
-#        cmpwi  r28, 0xff
-#        bne    locn01
-#
-#
-#------------------------------------------------------------------------
-# Init_cpu. Bank registers are setup for the IBM STB.
-#------------------------------------------------------------------------
-#
-# Setup processor core clock to be driven off chip.  This is GPI4 bit
-# twenty.  Setup Open Drain, Output Select, Three-State Control,  and
-# Three-State Select registers.
-#
-
-
-        pb0pesr  =        0x054
-        pb0pear  =        0x056
-
-	mflr	r30
-
-#-----------------------------------------------------------------------------
-# Vectors will be at 0x1F000000
-# Dummy Machine check handler just does RFI before true handler gets installed
-#-----------------------------------------------------------------------------
-#if 1  /* xuwentao added*/
-#ifdef SDRAM16MB
-         lis     r10,0x0000
-	addi 	r10,r10,0x0000
-#else
-        lis      r10,0x1F00
-	addi	r10,r10,0x0000
-#endif
-
-        mtspr   evpr,r10              #EVPR: 0x0 or 0x1f000000 depending
-        isync                         # on SDRAM memory model used.
-
-        lis     r10,0xFFFF                # clear PB0_PESR because some
-        ori    r10,r10,0xFFFF            #  transitions from flash,changed by linguohui
-        mtdcr   pb0pesr,r10               #  to load RAM image via RiscWatch
-        lis     r10,0x0000                #  cause PB0_PESR machine checks
-        mtdcr   pb0pear,r10
-        addis   r10,r10,0x0000            # clear the
-        mtxer   r10                       #           XER just in case...
-#endif /* xuwentao*/
-
-        bl      initb_ebiu0                      # init EBIU
-
-        bl      initb_config                     # config PPC and board
-
-
-
-
-#------------------------------------------------------------------------
-# EVPR  setup moved to top of this function.
-#------------------------------------------------------------------------
-#
-	mtlr	r30
-	blr
-        .end
diff --git a/arch/ppc/boot/simple/rw4/rw4_init_brd.S b/arch/ppc/boot/simple/rw4/rw4_init_brd.S
deleted file mode 100644
index 386afdaad6c7..000000000000
--- a/arch/ppc/boot/simple/rw4/rw4_init_brd.S
+++ /dev/null
@@ -1,1125 +0,0 @@
-/*----------------------------------------------------------------------------+
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
-|
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
-|
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
-|
-|       COPYRIGHT   I B M   CORPORATION 1997
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Author:    Tony J. Cerreto
-| Component: BSPS
-| File:      init_brd.s
-| Purpose:   Vesta Evaluation Board initialization subroutines.  The following
-|            routines are available:
-|              1. INITB_EBIU0:    Initialize EBIU0.
-|              2. INITB_CONFIG:   Configure board.
-|              3. INITB_HSMC0:    Initialize HSMC0 (SDRAM).
-|              4. INITB_HSMC1:    Initialize HSMC1 (SDRAM).
-|              5. INITB_CACHE:    Initialize Data and Instruction Cache.
-|              6. INITB_DCACHE:   Initialize Data Cache.
-|              7. INITB_ICACHE:   Initialize Instruction Cache.
-|              8. INITB_GET_CSPD: Get CPU Speed (Bus Speed and Processor Speed)
-|
-| Changes:
-| Date:      Author  Comment:
-| ---------  ------  --------
-| 01-Mar-00  tjc     Created
-| 04-Mar-00  jfh     Modified CIC_SEL3_VAL to support 1284 (Mux3 & GPIO 21-28)
-| 04-Mar-00  jfh     Modified XILINIX Reg 0 to support 1284 (Mux3 & GPIO 21-28)
-| 04-Mar-00  jfh     Modified XILINIX Reg 1 to support 1284 (Mux3 & GPIO 21-28)
-| 04-Mar-00  jfh     Modified XILINIX Reg 4 to support 1284 (Mux3 & GPIO 21-28)
-| 19-May-00  rlb     Relcoated HSMC0 to 0x1F000000 to support 32MB of contiguous
-|                    SDRAM space.  Changed cache ctl regs to reflect this.
-| 22-May-00  tjc     Changed initb_get_cspd interface and eliminated
-|                    initb_get_bspd routines.
-| 26-May-00  tjc     Added two nop instructions after all mtxxx/mfxxx
-|                    instructions due to PPC405 bug.
-+----------------------------------------------------------------------------*/
-#define VESTA
-#include "ppc_40x.h"
-#include "stb.h"
-
-/*----------------------------------------------------------------------------+
-| BOARD CONFIGURATION DEFINES
-+----------------------------------------------------------------------------*/
-#define CBS0_CR_VAL          0x00000002          /* CBS control reg value    */
-#define CIC0_CR_VAL          0xD0800448          /* CIC control reg value    */
-#define CIC0_SEL3_VAL        0x11500000          /* CIC select 3 reg value   */
-#define CIC0_VCR_VAL         0x00631700          /* CIC video cntl reg value */
-
-/*----------------------------------------------------------------------------+
-| EBIU0 BANK REGISTERS DEFINES
-+----------------------------------------------------------------------------*/
-#define EBIU0_BRCRH0_VAL     0x00000000          /* BR High 0 (Extension Reg)*/
-#define EBIU0_BRCRH1_VAL     0x00000000          /* BR High 1 (Extension Reg)*/
-#define EBIU0_BRCRH2_VAL     0x40000000          /* BR High 2 (Extension Reg)*/
-#define EBIU0_BRCRH3_VAL     0x40000000          /* BR High 3 (Extension Reg)*/
-#define EBIU0_BRCRH4_VAL     0x00000000          /* BR High 4 (Extension Reg)*/
-#define EBIU0_BRCRH5_VAL     0x00000000          /* BR High 5 (Extension Reg)*/
-#define EBIU0_BRCRH6_VAL     0x00000000          /* BR High 6 (Extension Reg)*/
-#define EBIU0_BRCRH7_VAL     0x40000000          /* BR High 7 (Extension Reg)*/
-
-#define EBIU0_BRCR0_VAL      0xFC58BFFE          /* BR 0: 16 bit Flash  4 MB */
-#define EBIU0_BRCR1_VAL      0xFF00BFFE          /* BR 1: Ext Connector 1 MB */
-#if 1
-#define EBIU0_BRCR2_VAL      0x207CFFBE          /* BR 2: Xilinx        8 MB */
-                                                 /* twt == 0x3f              */
-#else
-#define EBIU0_BRCR2_VAL      0x207CCFBE          /* BR 2: Xilinx        8 MB */
-                                                 /* twt == 0x0f              */
-#endif
-#define EBIU0_BRCR3_VAL      0x407CBFBE          /* BR 3: IDE Drive     8 MB */
-#define EBIU0_BRCR4_VAL      0xFF00BFFF          /* BR 4: Disabled.     0 MB */
-#define EBIU0_BRCR5_VAL      0xFF00BFFF          /* BR 5: Disabled.     0 MB */
-#define EBIU0_BRCR6_VAL      0xFF00BFFF          /* BR 6: Disabled.     0 MB */
-#define EBIU0_BRCR7_VAL      0xCE3F0003          /* BR 7: Line Mode DMA 2 MB */
-
-/*----------------------------------------------------------------------------+
-| GPIO DEFINES
-+----------------------------------------------------------------------------*/
-#define STB_GPIO0_OUTPUT     (STB_GPIO0_BASE_ADDRESS+ 0x00)
-#define STB_GPIO0_TC         (STB_GPIO0_BASE_ADDRESS+ 0x04)
-#define STB_GPIO0_OS_0_31    (STB_GPIO0_BASE_ADDRESS+ 0x08)
-#define STB_GPIO0_OS_32_63   (STB_GPIO0_BASE_ADDRESS+ 0x0C)
-#define STB_GPIO0_TS_0_31    (STB_GPIO0_BASE_ADDRESS+ 0x10)
-#define STB_GPIO0_TS_32_63   (STB_GPIO0_BASE_ADDRESS+ 0x14)
-#define STB_GPIO0_OD         (STB_GPIO0_BASE_ADDRESS+ 0x18)
-#define STB_GPIO0_INPUT      (STB_GPIO0_BASE_ADDRESS+ 0x1C)
-#define STB_GPIO0_R1         (STB_GPIO0_BASE_ADDRESS+ 0x20)
-#define STB_GPIO0_R2         (STB_GPIO0_BASE_ADDRESS+ 0x24)
-#define STB_GPIO0_R3         (STB_GPIO0_BASE_ADDRESS+ 0x28)
-#define STB_GPIO0_IS_1_0_31  (STB_GPIO0_BASE_ADDRESS+ 0x30)
-#define STB_GPIO0_IS_1_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x34)
-#define STB_GPIO0_IS_2_0_31  (STB_GPIO0_BASE_ADDRESS+ 0x38)
-#define STB_GPIO0_IS_2_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x3C)
-#define STB_GPIO0_IS_3_0_31  (STB_GPIO0_BASE_ADDRESS+ 0x40)
-#define STB_GPIO0_IS_3_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x44)
-#define STB_GPIO0_SS_1       (STB_GPIO0_BASE_ADDRESS+ 0x50)
-#define STB_GPIO0_SS_2       (STB_GPIO0_BASE_ADDRESS+ 0x54)
-#define STB_GPIO0_SS_3       (STB_GPIO0_BASE_ADDRESS+ 0x58)
-
-#define GPIO0_TC_VAL         0x0C020004          /* three-state control val  */
-#define GPIO0_OS_0_31_VAL    0x51A00004          /* output select 0-31  val  */
-#define GPIO0_OS_32_63_VAL   0x0000002F          /* output select 32-63 val  */
-#define GPIO0_TS_0_31_VAL    0x51A00000          /* three-state sel 0-31  val*/
-#define GPIO0_TS_32_63_VAL   0x0000000F          /* three-state sel 32-63 val*/
-#define GPIO0_OD_VAL         0xC0000004          /* open drain val           */
-#define GPIO0_IS_1_0_31_VAL  0x50000151          /* input select 1 0-31  val */
-#define GPIO0_IS_1_32_63_VAL 0x00000000          /* input select 1 32-63 val */
-#define GPIO0_IS_2_0_31_VAL  0x00000000          /* input select 2 0-31  val */
-#define GPIO0_IS_2_32_63_VAL 0x00000000          /* input select 2 32-63 val */
-#define GPIO0_IS_3_0_31_VAL  0x00000440          /* input select 3 0-31  val */
-#define GPIO0_IS_3_32_63_VAL 0x00000000          /* input select 3 32-63 val */
-#define GPIO0_SS_1_VAL       0x00000000          /* sync select 1 val        */
-#define GPIO0_SS_2_VAL       0x00000000          /* sync select 2 val        */
-#define GPIO0_SS_3_VAL       0x00000000          /* sync select 3 val        */
-
-/*----------------------------------------------------------------------------+
-| XILINX DEFINES
-+----------------------------------------------------------------------------*/
-#define STB_XILINX_LED       (STB_FPGA_BASE_ADDRESS+ 0x0100)
-#define STB_XILINX1_REG0     (STB_FPGA_BASE_ADDRESS+ 0x40000)
-#define STB_XILINX1_REG1     (STB_FPGA_BASE_ADDRESS+ 0x40002)
-#define STB_XILINX1_REG2     (STB_FPGA_BASE_ADDRESS+ 0x40004)
-#define STB_XILINX1_REG3     (STB_FPGA_BASE_ADDRESS+ 0x40006)
-#define STB_XILINX1_REG4     (STB_FPGA_BASE_ADDRESS+ 0x40008)
-#define STB_XILINX1_REG5     (STB_FPGA_BASE_ADDRESS+ 0x4000A)
-#define STB_XILINX1_REG6     (STB_FPGA_BASE_ADDRESS+ 0x4000C)
-#define STB_XILINX1_ID       (STB_FPGA_BASE_ADDRESS+ 0x4000E)
-#define STB_XILINX1_FLUSH    (STB_FPGA_BASE_ADDRESS+ 0x4000E)
-#define STB_XILINX2_REG0     (STB_FPGA_BASE_ADDRESS+ 0x80000)
-#define STB_XILINX2_REG1     (STB_FPGA_BASE_ADDRESS+ 0x80002)
-#define STB_XILINX2_REG2     (STB_FPGA_BASE_ADDRESS+ 0x80004)
-
-#define XILINX1_R0_VAL       0x2440              /* Xilinx 1 Register 0 Val  */
-#define XILINX1_R1_VAL       0x0025              /* Xilinx 1 Register 1 Val  */
-#define XILINX1_R2_VAL       0x0441              /* Xilinx 1 Register 2 Val  */
-#define XILINX1_R3_VAL       0x0008              /* Xilinx 1 Register 3 Val  */
-#define XILINX1_R4_VAL       0x0100              /* Xilinx 1 Register 4 Val  */
-#define XILINX1_R5_VAL       0x6810              /* Xilinx 1 Register 5 Val  */
-#define XILINX1_R6_VAL       0x0000              /* Xilinx 1 Register 6 Val  */
-#if 0
-#define XILINX2_R0_VAL       0x0008              /* Xilinx 2 Register 0 Val  */
-#define XILINX2_R1_VAL       0x0000              /* Xilinx 2 Register 1 Val  */
-#else
-#define XILINX2_R0_VAL       0x0018              /* disable IBM IrDA RxD     */
-#define XILINX2_R1_VAL       0x0008              /* enable SICC MAX chip     */
-#endif
-#define XILINX2_R2_VAL       0x0000              /* Xilinx 2 Register 2 Val  */
-
-/*----------------------------------------------------------------------------+
-| HSMC BANK REGISTERS DEFINES
-+----------------------------------------------------------------------------*/
-#ifdef SDRAM16MB
-#define HSMC0_BR0_VAL        0x000D2D55          /* 0x1F000000-007FFFFF R/W  */
-#define HSMC0_BR1_VAL        0x008D2D55          /* 0x1F800000-1FFFFFFF R/W  */
-#else
-#define HSMC0_BR0_VAL        0x1F0D2D55          /* 0x1F000000-007FFFFF R/W  */
-#define HSMC0_BR1_VAL        0x1F8D2D55          /* 0x1F800000-1FFFFFFF R/W  */
-#endif
-#define HSMC1_BR0_VAL        0xA00D2D55          /* 0xA0000000-A07FFFFF R/W  */
-#define HSMC1_BR1_VAL        0xA08D2D55          /* 0xA0800000-A0FFFFFF R/W  */
-
-/*----------------------------------------------------------------------------+
-| CACHE DEFINES
-+----------------------------------------------------------------------------*/
-#define DCACHE_NLINES               128          /* no. D-cache lines        */
-#define DCACHE_NBYTES                32          /* no. bytes/ D-cache line  */
-#define ICACHE_NLINES               256          /* no. I-cache lines        */
-#define ICACHE_NBYTES                32          /* no. bytes/ I-cache line  */
-#ifdef SDRAM16MB
-#define DCACHE_ENABLE        0x80000000          /* D-cache regions to enable*/
-#define ICACHE_ENABLE        0x80000001          /* I-cache regions to enable*/
-#else
-#define DCACHE_ENABLE        0x18000000          /* D-cache regions to enable*/
-#define ICACHE_ENABLE        0x18000001          /* I-cache regions to enable*/
-#endif
-
-/*----------------------------------------------------------------------------+
-| CPU CORE SPEED CALCULATION DEFINES
-+----------------------------------------------------------------------------*/
-#define GCS_LCNT                 500000          /* CPU speed loop count     */
-#define GCS_TROW_BYTES                8          /* no. bytes in table row   */
-#define GCS_CTICK_TOL               100          /* allowable clock tick tol */
-#define GCS_NMULT                     4          /* no. of core speed mults  */
-
-        /*--------------------------------------------------------------------+
-        |        No. 13.5Mhz
-        |        Clock Ticks
-        |        based on a
-        |        loop count    Bus
-        |        of 100,000    Speed
-        +--------------------------------------------------------------------*/
-gcs_lookup_table:
-        .int           50000,  54000000          /* 54.0 Mhz                 */
-        .int           66667,  40500000          /* 40.5 Mhz                 */
-        .int           54545,  49500000          /* 49.5 Mhz                 */
-        .int           46154,  58500000          /* 58.5 Mhz                 */
-        .int               0,         0          /* end of table flag        */
-
-
-/*****************************************************************************+
-| XXXXXXX  XXX XXX   XXXXXX  XXXXXXX  XXXXXX   XX   XX     XX    XXXX
-|  XX   X   XX XX    X XX X   XX   X   XX  XX  XXX  XX    XXXX    XX
-|  XX X      XXX       XX     XX X     XX  XX  XXXX XX   XX  XX   XX
-|  XXXX       X        XX     XXXX     XXXXX   XX XXXX   XX  XX   XX
-|  XX X      XXX       XX     XX X     XX XX   XX  XXX   XXXXXX   XX
-|  XX   X   XX XX      XX     XX   X   XX  XX  XX   XX   XX  XX   XX  XX
-| XXXXXXX  XXX XXX    XXXX   XXXXXXX  XXX  XX  XX   XX   XX  XX  XXXXXXX
-+*****************************************************************************/
-/******************************************************************************
-|
-| Routine:    INITB_EBIU0.
-|
-| Purpose:    Initialize all the EBIU0 Bank Registers
-| Parameters: None.
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_ebiu0)
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 0
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR0_VAL@h
-        ori     r10,r10,EBIU0_BRCR0_VAL@l
-        mtdcr   ebiu0_brcr0,r10
-        lis     r10,EBIU0_BRCRH0_VAL@h
-        ori     r10,r10,EBIU0_BRCRH0_VAL@l
-        mtdcr   ebiu0_brcrh0,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 1
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR1_VAL@h
-        ori     r10,r10,EBIU0_BRCR1_VAL@l
-        mtdcr   ebiu0_brcr1,r10
-        lis     r10,EBIU0_BRCRH1_VAL@h
-        ori     r10,r10,EBIU0_BRCRH1_VAL@l
-        mtdcr   ebiu0_brcrh1,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 2
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR2_VAL@h
-        ori     r10,r10,EBIU0_BRCR2_VAL@l
-        mtdcr   ebiu0_brcr2,r10
-        lis     r10,EBIU0_BRCRH2_VAL@h
-        ori     r10,r10,EBIU0_BRCRH2_VAL@l
-        mtdcr   ebiu0_brcrh2,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 3
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR3_VAL@h
-        ori     r10,r10,EBIU0_BRCR3_VAL@l
-        mtdcr   ebiu0_brcr3,r10
-        lis     r10,EBIU0_BRCRH3_VAL@h
-        ori     r10,r10,EBIU0_BRCRH3_VAL@l
-        mtdcr   ebiu0_brcrh3,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 4
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR4_VAL@h
-        ori     r10,r10,EBIU0_BRCR4_VAL@l
-        mtdcr   ebiu0_brcr4,r10
-        lis     r10,EBIU0_BRCRH4_VAL@h
-        ori     r10,r10,EBIU0_BRCRH4_VAL@l
-        mtdcr   ebiu0_brcrh4,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 5
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR5_VAL@h
-        ori     r10,r10,EBIU0_BRCR5_VAL@l
-        mtdcr   ebiu0_brcr5,r10
-        lis     r10,EBIU0_BRCRH5_VAL@h
-        ori     r10,r10,EBIU0_BRCRH5_VAL@l
-        mtdcr   ebiu0_brcrh5,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 6
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR6_VAL@h
-        ori     r10,r10,EBIU0_BRCR6_VAL@l
-        mtdcr   ebiu0_brcr6,r10
-        lis     r10,EBIU0_BRCRH6_VAL@h
-        ori     r10,r10,EBIU0_BRCRH6_VAL@l
-        mtdcr   ebiu0_brcrh6,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 7
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR7_VAL@h
-        ori     r10,r10,EBIU0_BRCR7_VAL@l
-        mtdcr   ebiu0_brcr7,r10
-        lis     r10,EBIU0_BRCRH7_VAL@h
-        ori     r10,r10,EBIU0_BRCRH7_VAL@l
-        mtdcr   ebiu0_brcrh7,r10
-
-        blr
-        function_epilog(initb_ebiu0)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_CONFIG
-|
-| Purpose:    Configure the Vesta Evaluation Board.  The following items
-|             will be configured:
-|               1.  Cross-Bar Switch.
-|               2.  Chip Interconnect.
-|               3.  Clear/reset key PPC registers.
-|               4.  Xilinx and GPIO Registers.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_config)
-        /*--------------------------------------------------------------------+
-        |  Init CROSS-BAR SWITCH
-        +--------------------------------------------------------------------*/
-        lis     r10,CBS0_CR_VAL@h                /* r10 <- CBS Cntl Reg val  */
-        ori     r10,r10,CBS0_CR_VAL@l
-        mtdcr   cbs0_cr,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init Chip-Interconnect (CIC) Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,CIC0_CR_VAL@h                /* r10 <- CIC Cntl Reg val  */
-        ori     r10,r10,CIC0_CR_VAL@l
-        mtdcr   cic0_cr,r10
-
-        lis     r10,CIC0_SEL3_VAL@h              /* r10 <- CIC SEL3 Reg val  */
-        ori     r10,r10,CIC0_SEL3_VAL@l
-        mtdcr   cic0_sel3,r10
-
-        lis     r10,CIC0_VCR_VAL@h               /* r10 <- CIC Vid C-Reg val */
-        ori     r10,r10,CIC0_VCR_VAL@l
-        mtdcr   cic0_vcr,r10
-
-        /*--------------------------------------------------------------------+
-        | Clear SGR and DCWR
-        +--------------------------------------------------------------------*/
-        li      r10,0x0000
-        mtspr   sgr,r10
-        mtspr   dcwr,r10
-
-        /*--------------------------------------------------------------------+
-        | Clear/set up some machine state registers.
-        +--------------------------------------------------------------------*/
-        li      r10,0x0000                       /* r10 <- 0                 */
-        mtdcr   ebiu0_besr,r10                   /* clr Bus Err Syndrome Reg */
-        mtspr   esr,r10                          /* clr Exceptn Syndrome Reg */
-        mttcr   r10                              /* timer control register   */
-
-        mtdcr   uic0_er,r10                      /* disable all interrupts   */
-
-	/* UIC_IIC0 | UIC_IIC1 | UIC_U0 | UIC_IR_RCV | UIC_IR_XMIT */
-	lis	r10,    0x00600e00@h
-	ori	r10,r10,0x00600e00@l
-	mtdcr	uic0_pr,r10
-
-	li	r10,0x00000020			/* UIC_EIR1 */
-	mtdcr	uic0_tr,r10
-
-        lis     r10,0xFFFF                       /* r10 <- 0xFFFFFFFF        */
-        ori     r10,r10,0xFFFF                   /*                          */
-        mtdbsr  r10                              /* clear/reset the dbsr     */
-        mtdcr   uic0_sr,r10                      /* clear pending interrupts */
-
-        li      r10,0x1000                       /* set Machine Exception bit*/
-        oris    r10,r10,0x2                      /* set Criticl Exception bit*/
-        mtmsr   r10                              /* change MSR               */
-
-        /*--------------------------------------------------------------------+
-        |  Clear XER.
-        +--------------------------------------------------------------------*/
-        li      r10,0x0000
-        mtxer   r10
-
-        /*--------------------------------------------------------------------+
-        |  Init GPIO0 Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,    STB_GPIO0_TC@h           /* Three-state control      */
-        ori     r10,r10,STB_GPIO0_TC@l
-        lis     r11,    GPIO0_TC_VAL@h
-        ori     r11,r11,GPIO0_TC_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_OS_0_31@h      /* output select 0-31       */
-        ori     r10,r10,STB_GPIO0_OS_0_31@l
-        lis     r11,    GPIO0_OS_0_31_VAL@h
-        ori     r11,r11,GPIO0_OS_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_OS_32_63@h     /* output select 32-63      */
-        ori     r10,r10,STB_GPIO0_OS_32_63@l
-        lis     r11,    GPIO0_OS_32_63_VAL@h
-        ori     r11,r11,GPIO0_OS_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_TS_0_31@h      /* three-state select 0-31  */
-        ori     r10,r10,STB_GPIO0_TS_0_31@l
-        lis     r11,    GPIO0_TS_0_31_VAL@h
-        ori     r11,r11,GPIO0_TS_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_TS_32_63@h     /* three-state select 32-63 */
-        ori     r10,r10,STB_GPIO0_TS_32_63@l
-        lis     r11,    GPIO0_TS_32_63_VAL@h
-        ori     r11,r11,GPIO0_TS_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_OD@h           /* open drain               */
-        ori     r10,r10,STB_GPIO0_OD@l
-        lis     r11,    GPIO0_OD_VAL@h
-        ori     r11,r11,GPIO0_OD_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_1_0_31@h    /* input select 1, 0-31     */
-        ori     r10,r10,STB_GPIO0_IS_1_0_31@l
-        lis     r11,    GPIO0_IS_1_0_31_VAL@h
-        ori     r11,r11,GPIO0_IS_1_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_1_32_63@h   /* input select 1, 32-63    */
-        ori     r10,r10,STB_GPIO0_IS_1_32_63@l
-        lis     r11,    GPIO0_IS_1_32_63_VAL@h
-        ori     r11,r11,GPIO0_IS_1_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_2_0_31@h    /* input select 2, 0-31     */
-        ori     r10,r10,STB_GPIO0_IS_2_0_31@l
-        lis     r11,    GPIO0_IS_2_0_31_VAL@h
-        ori     r11,r11,GPIO0_IS_2_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_2_32_63@h   /* input select 2, 32-63    */
-        ori     r10,r10,STB_GPIO0_IS_2_32_63@l
-        lis     r11,    GPIO0_IS_2_32_63_VAL@h
-        ori     r11,r11,GPIO0_IS_2_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_3_0_31@h    /* input select 3, 0-31     */
-        ori     r10,r10,STB_GPIO0_IS_3_0_31@l
-        lis     r11,    GPIO0_IS_3_0_31_VAL@h
-        ori     r11,r11,GPIO0_IS_3_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_3_32_63@h   /* input select 3, 32-63    */
-        ori     r10,r10,STB_GPIO0_IS_3_32_63@l
-        lis     r11,    GPIO0_IS_3_32_63_VAL@h
-        ori     r11,r11,GPIO0_IS_3_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_SS_1@h         /* sync select 1            */
-        ori     r10,r10,STB_GPIO0_SS_1@l
-        lis     r11,    GPIO0_SS_1_VAL@h
-        ori     r11,r11,GPIO0_SS_1_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_SS_2@h         /* sync select 2            */
-        ori     r10,r10,STB_GPIO0_SS_2@l
-        lis     r11,    GPIO0_SS_2_VAL@h
-        ori     r11,r11,GPIO0_SS_2_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_SS_3@h         /* sync select 3            */
-        ori     r10,r10,STB_GPIO0_SS_3@l
-        lis     r11,    GPIO0_SS_3_VAL@h
-        ori     r11,r11,GPIO0_SS_3_VAL@l
-        stw     r11,0(r10)
-
-        /*--------------------------------------------------------------------+
-        |  Init Xilinx #1 Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,    STB_XILINX1_REG0@h       /* init Xilinx1 Reg 0       */
-        ori     r10,r10,STB_XILINX1_REG0@l
-        li      r11,XILINX1_R0_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG1@h       /* init Xilinx1 Reg 1       */
-        ori     r10,r10,STB_XILINX1_REG1@l
-        li      r11,XILINX1_R1_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG2@h       /* init Xilinx1 Reg 2       */
-        ori     r10,r10,STB_XILINX1_REG2@l
-        li      r11,XILINX1_R2_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG3@h       /* init Xilinx1 Reg 3       */
-        ori     r10,r10,STB_XILINX1_REG3@l
-        li      r11,XILINX1_R3_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG4@h       /* init Xilinx1 Reg 4       */
-        ori     r10,r10,STB_XILINX1_REG4@l
-        li      r11,XILINX1_R4_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG5@h       /* init Xilinx1 Reg 5       */
-        ori     r10,r10,STB_XILINX1_REG5@l
-        li      r11,XILINX1_R5_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG6@h       /* init Xilinx1 Reg 6       */
-        ori     r10,r10,STB_XILINX1_REG6@l
-        li      r11,XILINX1_R6_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_FLUSH@h      /* latch registers in Xilinx*/
-        ori     r10,r10,STB_XILINX1_FLUSH@l
-        li      r11,0x0000
-        sth     r11,0(r10)
-
-        /*--------------------------------------------------------------------+
-        |  Init Xilinx #2 Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,    STB_XILINX2_REG0@h       /* init Xilinx2 Reg 0       */
-        ori     r10,r10,STB_XILINX2_REG0@l
-        li      r11,XILINX2_R0_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX2_REG1@h       /* init Xilinx2 Reg 1       */
-        ori     r10,r10,STB_XILINX2_REG1@l
-        li      r11,XILINX2_R1_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX2_REG2@h       /* init Xilinx2 Reg 2       */
-        ori     r10,r10,STB_XILINX2_REG2@l
-        li      r11,XILINX2_R2_VAL
-        sth     r11,0(r10)
-
-        blr
-        function_epilog(initb_config)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_HSMC0.
-|
-| Purpose:    Initialize the HSMC0 Registers for SDRAM
-| Parameters: None.
-| Returns:    R3 =  0: Successful
-|                = -1: Unsuccessful, SDRAM did not reset properly.
-|
-******************************************************************************/
-        function_prolog(initb_hsmc0)
-        mflr    r0                               /* Save return addr         */
-
-        /*--------------------------------------------------------------------+
-        |  Set Global SDRAM Controller to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x6C00
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_gr,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Data Register to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0037
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_data,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC0 Bank Register 0
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR0_VAL@h
-        ori     r10,r10,HSMC0_BR0_VAL@l
-        mtdcr   hsmc0_br0,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC0 Bank Register 1
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR1_VAL@h
-        ori     r10,r10,HSMC0_BR1_VAL@l
-        mtdcr   hsmc0_br1,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Control Reg 0
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BKS */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr0,r10
-        li      r3,0x0000
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH             */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr0,r10
-        li      r3,0x0000
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8070                       /* PROG MODE W/DATA REG VAL */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc0_cr0,r10
-        li      r3,0x0000
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc0_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Control Reg 1
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BKS */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr1,r10
-        li      r3,0x0001
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH             */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr1,r10
-        li      r3,0x0001
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8070                       /* PROG MODE W/DATA REG VAL */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc0_cr1,r10
-        li      r3,0x0001
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Refresh Register
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0FE1
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_crr,r10
-        li      r3,0
-
-hsmc0_err:
-        mtlr    r0
-        blr
-        function_epilog(initb_hsmc0)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_HSMC1.
-|
-| Purpose:    Initialize the HSMC1 Registers for SDRAM
-| Parameters: None.
-| Returns:    R3 =  0: Successful
-|                = -1: Unsuccessful, SDRAM did not reset properly.
-|
-******************************************************************************/
-        function_prolog(initb_hsmc1)
-        mflr    r0                               /* Save return addr         */
-
-        /*--------------------------------------------------------------------+
-        |  Set Global SDRAM Controller to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x6C00
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_gr,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Data Register to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0037
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_data,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC1 Bank Register 0
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC1_BR0_VAL@h
-        ori     r10,r10,HSMC1_BR0_VAL@l
-        mtdcr   hsmc1_br0,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC1 Bank Register 1
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC1_BR1_VAL@h
-        ori     r10,r10,HSMC1_BR1_VAL@l
-        mtdcr   hsmc1_br1,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Control Reg 0
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BANKS    */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr0,r10
-        li      r3,0x0002
-        bl      hsmc_cr_wait                     /* wait for operation completion */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH                  */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr0,r10
-        li      r3,0x0002
-        bl      hsmc_cr_wait                     /* wait for operation completion */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8070                       /* PROGRAM MODE W/DATA REG VALUE */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc1_cr0,r10
-        li      r3,0x0002
-        bl      hsmc_cr_wait                     /* wait for operation completion */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Control Reg 1
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BKS */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr1,r10
-        li      r3,0x0003
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH             */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr1,r10
-        li      r3,0x0003
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8070                       /* PROG MODE W/DATA REG VAL */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc1_cr1,r10
-        li      r3,0x0003
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Refresh Register
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0FE1
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_crr,r10
-        xor     r3,r3,r3
-
-hsmc1_err:
-        mtlr    r0
-        blr
-        function_epilog(initb_hsmc1)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_CACHE
-|
-| Purpose:    This routine will enable Data and Instruction Cache.
-|             The Data Cache is an 8K two-way set associative and the
-|             Instruction Cache is an 16K two-way set associative cache.
-|
-| Parameters: None.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_cache)
-        mflr    r0                               /* Save return addr         */
-
-        bl      initb_Dcache                     /* enable D-Cache           */
-        bl      initb_Icache                     /* enable I-Cache           */
-
-        mtlr    r0
-        blr
-       function_epilog(initb_cache)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_DCACHE
-|
-| Purpose:    This routine will invalidate all data in the Data Cache and
-|             then enable D-Cache.  If cache is enabled already, the D-Cache
-|             will be flushed before the data is invalidated.
-|
-| Parameters: None.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_Dcache)
-        /*--------------------------------------------------------------------+
-        |  Flush Data Cache if enabled
-        +--------------------------------------------------------------------*/
-        mfdccr  r10                              /* r10 <- DCCR              */
-        isync                                    /* ensure prev insts done   */
-        cmpwi   r10,0x00
-        beq     ic_dcinv                         /* D-cache off, invalidate  */
-
-        /*--------------------------------------------------------------------+
-        |  Data Cache enabled, force known memory addresses to be Cached
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR0_VAL@h              /* r10 <- first memory loc  */
-        andis.  r10,r10,0xFFF0
-        li      r11,DCACHE_NLINES                /* r11 <- # A-way addresses */
-        addi    r11,r11,DCACHE_NLINES            /* r11 <- # B-way addresses */
-        mtctr   r11                              /* set loop counter         */
-
-ic_dcload:
-        lwz     r12,0(r10)                       /* force cache of address   */
-        addi    r10,r10,DCACHE_NBYTES            /* r10 <- next memory loc   */
-        bdnz    ic_dcload
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Flush the known memory addresses from Cache
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR0_VAL@h              /* r10 <- first memory loc  */
-        andis.  r10,r10,0xFFF0
-        mtctr   r11                              /* set loop counter         */
-
-ic_dcflush:
-        dcbf    0,r10                            /* flush D-cache line       */
-        addi    r10,r10,DCACHE_NBYTES            /* r10 <- next memory loc   */
-        bdnz    ic_dcflush
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Disable then invalidate Data Cache
-        +--------------------------------------------------------------------*/
-        li      r10,0                            /* r10 <- 0                 */
-        mtdccr  r10                              /* disable the D-Cache      */
-        isync                                    /* ensure prev insts done   */
-
-ic_dcinv:
-        li      r10,0                            /* r10 <- line address      */
-        li      r11,DCACHE_NLINES                /* r11 <- # lines in cache  */
-        mtctr   r11                              /* set loop counter         */
-
-ic_dcloop:
-        dccci   0,r10                            /* invalidate A/B cache lns */
-        addi    r10,r10,DCACHE_NBYTES            /* bump to next line        */
-        bdnz    ic_dcloop
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Enable Data Cache
-        +--------------------------------------------------------------------*/
-        lis     r10,DCACHE_ENABLE@h              /* r10 <- D-cache enable msk*/
-        ori     r10,r10,DCACHE_ENABLE@l
-        mtdccr  r10
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        blr
-        function_epilog(initb_Dcache)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_ICACHE
-|
-| Purpose:    This routine will invalidate all data in the Instruction
-|             Cache then enable I-Cache.
-|
-| Parameters: None.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_Icache)
-        /*--------------------------------------------------------------------+
-        |  Invalidate Instruction Cache
-        +--------------------------------------------------------------------*/
-        li      r10,0                            /* r10 <- lines address     */
-        iccci   0,r10                            /* invalidate all I-cache   */
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Enable Instruction Cache
-        +--------------------------------------------------------------------*/
-        lis     r10,ICACHE_ENABLE@h              /* r10 <- I-cache enable msk*/
-        ori     r10,r10,ICACHE_ENABLE@l
-        mticcr  r10
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        blr
-        function_epilog(initb_Icache)
-
-#if 0
-/******************************************************************************
-|
-| Routine:    INITB_GET_CSPD
-|
-| Purpose:    Determine the CPU Core Speed.  The 13.5 Mhz Time Base
-|             Counter (TBC) is used to measure a conditional branch
-|             instruction.
-|
-| Parameters: R3 = Address of Bus Speed
-|             R4 = Address of Core Speed
-|
-| Returns:    (R3) = >0: Bus Speed.
-|                     0: Bus Speed not found in Look-Up Table.
-|             (R4) = >0: Core Speed.
-|                     0: Core Speed not found in Look-Up Table.
-|
-| Note:       1. This routine assumes the bdnz branch instruction takes
-|                two instruction cycles to complete.
-|             2. This routine must be called before interrupts are enabled.
-|
-******************************************************************************/
-        function_prolog(initb_get_cspd)
-        mflr    r0                               /* Save return address      */
-        /*--------------------------------------------------------------------+
-        |  Set-up timed loop
-        +--------------------------------------------------------------------*/
-        lis     r9,gcs_time_loop@h               /* r9  <- addr loop instr   */
-        ori     r9,r9,gcs_time_loop@l
-        lis     r10,GCS_LCNT@h                   /* r10 <- loop count        */
-        ori     r10,r10,GCS_LCNT@l
-        mtctr   r10                              /* ctr <- loop count        */
-        lis     r11,STB_TIMERS_TBC@h             /* r11 <- TBC register addr */
-        ori     r11,r11,STB_TIMERS_TBC@l
-        li      r12,0                            /* r12 <- 0                 */
-
-        /*--------------------------------------------------------------------+
-        |  Cache timed-loop instruction
-        +--------------------------------------------------------------------*/
-        icbt    0,r9
-        sync
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Get number of 13.5 Mhz cycles to execute time-loop
-        +--------------------------------------------------------------------*/
-        stw     r12,0(r11)                       /* reset TBC                */
-gcs_time_loop:
-        bdnz+   gcs_time_loop                    /* force branch pred taken  */
-        lwz     r5,0(r11)                        /* r5 <- num 13.5 Mhz ticks */
-        li      r6,5                             /* LUT based on 1/5th the...*/
-        divw    r5,r5,r6                         /*..loop count used         */
-        sync
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Look-up core speed based on TBC value
-        +--------------------------------------------------------------------*/
-        lis     r6,gcs_lookup_table@h            /* r6 <- pts at core spd LUT*/
-        ori     r6,r6,gcs_lookup_table@l
-        bl      gcs_cspd_lookup                  /* find core speed in LUT   */
-
-        mtlr    r0                               /* set return address       */
-        blr
-        function_epilog(initb_get_cspd)
-
-#endif
-/*****************************************************************************+
-| XXXX   XX   XX   XXXXXX  XXXXXXX  XXXXXX   XX   XX     XX    XXXX
-|  XX    XXX  XX   X XX X   XX   X   XX  XX  XXX  XX    XXXX    XX
-|  XX    XXXX XX     XX     XX X     XX  XX  XXXX XX   XX  XX   XX
-|  XX    XX XXXX     XX     XXXX     XXXXX   XX XXXX   XX  XX   XX
-|  XX    XX  XXX     XX     XX X     XX XX   XX  XXX   XXXXXX   XX
-|  XX    XX   XX     XX     XX   X   XX  XX  XX   XX   XX  XX   XX  XX
-| XXXX   XX   XX    XXXX   XXXXXXX  XXX  XX  XX   XX   XX  XX  XXXXXXX
-+*****************************************************************************/
-/******************************************************************************
-|
-| Routine:    HSMC_CR_WAIT
-|
-| Purpose:    Wait for the HSMC Control Register (bits 12-16) to be reset
-|             after an auto-refresh, pre-charge or program mode register
-|             command execution.
-|
-| Parameters: R3 = HSMC Control Register ID.
-|                  0: HSMC0 CR0
-|                  1: HSMC0 CR1
-|                  2: HSMC1 CR0
-|                  3: HSMC1 CR1
-|
-| Returns:    R3 = 0: Successful
-|                 -1: Unsuccessful
-|
-******************************************************************************/
-hsmc_cr_wait:
-
-        li      r11,10                           /* r11 <- retry counter     */
-        mtctr   r11                              /* set retry counter        */
-        mr      r11,r3                           /* r11 <- HSMC CR reg id    */
-
-hsmc_cr_rep:
-        bdz     hsmc_cr_err                      /* branch if max retries hit*/
-
-        /*--------------------------------------------------------------------+
-        |  GET HSMCx_CRx value based on HSMC Control Register ID
-        +--------------------------------------------------------------------*/
-try_hsmc0_cr0:                                   /* CHECK IF ID=HSMC0 CR0 REG*/
-        cmpwi   cr0,r11,0x0000
-        bne     cr0,try_hsmc0_cr1
-        mfdcr   r10,hsmc0_cr0                    /* r11 <- HSMC0 CR0 value   */
-        b       hsmc_cr_read
-
-try_hsmc0_cr1:                                   /* CHECK IF ID=HSMC0 CR1 REG*/
-        cmpwi   cr0,r11,0x0001
-        bne     cr0,try_hsmc1_cr0
-        mfdcr   r10,hsmc0_cr1                    /* r10 <- HSMC0 CR1 value   */
-        b       hsmc_cr_read
-
-try_hsmc1_cr0:                                   /* CHECK IF ID=HSMC1 CR0 REG*/
-        cmpwi   cr0,r11,0x0002
-        bne     cr0,try_hsmc1_cr1
-        mfdcr   r10,hsmc1_cr0                    /* r10 <- HSMC1 CR0 value   */
-        b       hsmc_cr_read
-
-try_hsmc1_cr1:                                   /* CHECK IF ID=HSMC1 CR1 REG*/
-        cmpwi   cr0,r11,0x0003
-        bne     cr0,hsmc_cr_err
-        mfdcr   r10,hsmc1_cr1                    /* r10 <- HSMC1 CR1 value   */
-
-        /*--------------------------------------------------------------------+
-        |  Check if HSMC CR register was reset after command execution
-        +--------------------------------------------------------------------*/
-hsmc_cr_read:
-        lis     r12,0x000F                       /* create "AND" mask        */
-        ori     r12,r12,0x8000
-        and.    r10,r10,r12                      /* r10 <- HSMC CR bits 12-16*/
-        bne     cr0,hsmc_cr_rep                  /* wait for bits to reset   */
-        li      r3,0                             /* set return code = success*/
-        b       hsmc_cr_done
-
-hsmc_cr_err:                                     /* ERROR: SDRAM didn't reset*/
-        li      r3,-1                            /* set RC=unsuccessful      */
-
-hsmc_cr_done:
-        blr
-
-#if 0
-/******************************************************************************
-|
-| Routine:    GCS_CSPD_LOOKUP
-|
-| Purpose:    Uses the number of 13.5 Mhz clock ticks found after executing
-|             the branch instruction time loop to look-up the CPU Core Speed
-|             in the Core Speed Look-up Table.
-|
-| Parameters: R3 = Address of Bus Speed
-|             R4 = Address of Core Speed
-|             R5 = Number of 13.5 Mhz clock ticks found in time loop.
-|             R6 = Pointer to Core-Speed Look-Up Table
-|
-| Returns:    (R3) = >0: Bus Speed.
-|                     0: Bus Speed not found in Look-Up Table.
-|             (R4) = >0: Core Speed.
-|                     0: Core Speed not found in Look-Up Table.
-|
-| Note:       Core Speed = Bus Speed * Mult Factor (1-4x).
-|
-******************************************************************************/
-gcs_cspd_lookup:
-
-        li      r9,1                             /* r9 <- core speed mult    */
-        /*--------------------------------------------------------------------+
-        |  Get theoritical number 13.5 Mhz ticks for a given Bus Speed from
-        |  Look-up Table.  Check all mult factors to determine if calculated
-        |  value matches theoretical value (within a tolerance).
-        +--------------------------------------------------------------------*/
-gcs_cspd_loop:
-        lwz     r10,0(r6)                        /* r10 <- no. ticks from LUT*/
-        divw    r10,r10,r9                       /* r10 <- div mult (1-4x)   */
-        subi    r11,r10,GCS_CTICK_TOL            /* r11 <- no. tks low range */
-        addi    r12,r10,GCS_CTICK_TOL            /* r12 <- no. tks high range*/
-
-        cmpw    cr0,r5,r11                       /* calc value within range? */
-        blt     gcs_cspd_retry                   /* less than low range      */
-        cmpw    cr0,r5,r12
-        bgt     gcs_cspd_retry                   /* greater than high range  */
-        b       gcs_cspd_fnd                     /* calc value within range  */
-
-        /*--------------------------------------------------------------------+
-        |  SO FAR CORE SPEED NOT FOUND: Check next mult factor
-        +--------------------------------------------------------------------*/
-gcs_cspd_retry:
-        addi    r9,r9,1                          /* bump mult factor (1-4x)  */
-        cmpwi   cr0,r9,GCS_NMULT
-        ble     gcs_cspd_loop
-
-        /*--------------------------------------------------------------------+
-        |  SO FAR CORE SPEED NOT FOUND: Point at next Bus Speed in LUT
-        +--------------------------------------------------------------------*/
-        li      r9,1                             /* reset mult factor        */
-        addi    r6,r6,GCS_TROW_BYTES             /* point at next table entry*/
-        lwz     r10,0(r6)
-        cmpwi   cr0,r10,0                        /* check for EOT flag       */
-        bne     gcs_cspd_loop
-
-        /*--------------------------------------------------------------------+
-        |  COMPUTE CORE SPEED AND GET BUS SPEED FROM LOOK-UP TABLE
-        +--------------------------------------------------------------------*/
-gcs_cspd_fnd:
-        lwz     r5,4(r6)                         /*  r5  <- Bus Speed in LUT */
-        mullw   r6,r5,r9                         /*  r6  <- Core speed       */
-        stw     r5,0(r3)                         /* (r3) <- Bus Speed        */
-        stw     r6,0(r4)                         /* (r4) <- Core Speed       */
-
-        blr
-#endif
diff --git a/arch/ppc/boot/simple/rw4/stb.h b/arch/ppc/boot/simple/rw4/stb.h
deleted file mode 100644
index 9afa5ab24d26..000000000000
--- a/arch/ppc/boot/simple/rw4/stb.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*----------------------------------------------------------------------------+
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
-|
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
-|
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
-|
-|       COPYRIGHT   I B M   CORPORATION 1999
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Author: Maciej P. Tyrlik
-| Component: Include file.
-| File: stb.h
-| Purpose: Common Set-tob-box definitions.
-| Changes:
-| Date:         Comment:
-| -----         --------
-| 14-Jan-97     Created for ElPaso pass 1                                   MPT
-| 13-May-97     Added function prototype and global variables               MPT
-| 08-Dec-98     Added RAW IR task information                               MPT
-| 19-Jan-99     Port to Romeo                                               MPT
-| 19-May-00     Changed SDRAM to 32MB contiguous 0x1F000000 - 0x20FFFFFF    RLB
-+----------------------------------------------------------------------------*/
-
-#ifndef _stb_h_
-#define _stb_h_
-
-/*----------------------------------------------------------------------------+
-| Read/write from I/O macros.
-+----------------------------------------------------------------------------*/
-#define inbyte(port)            (*((unsigned char volatile *)(port)))
-#define outbyte(port,data)      *(unsigned char volatile *)(port)=\
-                                (unsigned char)(data)
-
-#define inshort(port)           (*((unsigned short volatile *)(port)))
-#define outshort(port,data)     *(unsigned short volatile *)(port)=\
-                                (unsigned short)(data)
-
-#define inword(port)            (*((unsigned long volatile *)(port)))
-#define outword(port,data)      *(unsigned long volatile *)(port)=\
-                                (unsigned long)(data)
-
-/*----------------------------------------------------------------------------+
-| STB interrupts.
-+----------------------------------------------------------------------------*/
-#define STB_XP_TP_INT           0
-#define STB_XP_APP_INT          1
-#define STB_AUD_INT             2
-#define STB_VID_INT             3
-#define STB_DMA0_INT            4
-#define STB_DMA1_INT            5
-#define STB_DMA2_INT            6
-#define STB_DMA3_INT            7
-#define STB_SCI_INT             8
-#define STB_I2C1_INT            9
-#define STB_I2C2_INT            10
-#define STB_GPT_PWM0            11
-#define STB_GPT_PWM1            12
-#define STB_SCP_INT             13
-#define STB_SSP_INT             14
-#define STB_GPT_PWM2            15
-#define STB_EXT5_INT            16
-#define STB_EXT6_INT            17
-#define STB_EXT7_INT            18
-#define STB_EXT8_INT            19
-#define STB_SCC_INT             20
-#define STB_SICC_RECV_INT       21
-#define STB_SICC_TRAN_INT       22
-#define STB_PPU_INT             23
-#define STB_DCRX_INT            24
-#define STB_EXT0_INT            25
-#define STB_EXT1_INT            26
-#define STB_EXT2_INT            27
-#define STB_EXT3_INT            28
-#define STB_EXT4_INT            29
-#define STB_REDWOOD_ENET_INT    STB_EXT1_INT
-
-/*----------------------------------------------------------------------------+
-| STB tasks, task stack sizes, and task priorities.  The actual task priority
-| is 1 more than the specified number since priority 0 is reserved (system
-| internally adds 1 to supplied priority number).
-+----------------------------------------------------------------------------*/
-#define STB_IDLE_TASK_SS        (5* 1024)
-#define STB_IDLE_TASK_PRIO      0
-#define STB_LEDTEST_SS          (2* 1024)
-#define STB_LEDTEST_PRIO        0
-#define STB_CURSOR_TASK_SS      (10* 1024)
-#define STB_CURSOR_TASK_PRIO    7
-#define STB_MPEG_TASK_SS        (10* 1024)
-#define STB_MPEG_TASK_PRIO      9
-#define STB_DEMUX_TASK_SS       (10* 1024)
-#define STB_DEMUX_TASK_PRIO     20
-#define RAW_STB_IR_TASK_SS      (10* 1024)
-#define RAW_STB_IR_TASK_PRIO    20
-
-#define STB_SERIAL_ER_TASK_SS   (10* 1024)
-#define STB_SERIAL_ER_TASK_PRIO 1
-#define STB_CA_TASK_SS          (10* 1024)
-#define STB_CA_TASK_PRIO        8
-
-#define INIT_DEFAULT_VIDEO_SS   (10* 1024)
-#define INIT_DEFAULT_VIDEO_PRIO 8
-#define INIT_DEFAULT_SERVI_SS   (10* 1024)
-#define INIT_DEFAULT_SERVI_PRIO 8
-#define INIT_DEFAULT_POST_SS    (10* 1024)
-#define INIT_DEFAULT_POST_PRIO  8
-#define INIT_DEFAULT_INTER_SS   (10* 1024)
-#define INIT_DEFAULT_INTER_PRIO 8
-#define INIT_DEFAULT_BR_SS      (10* 1024)
-#define INIT_DEFAULT_BR_PRIO    8
-#define INITIAL_TASK_STACK_SIZE (32* 1024)
-
-#ifdef VESTA
-/*----------------------------------------------------------------------------+
-| Vesta Overall Address Map (all addresses are double mapped, bit 0 of the
-| address is not decoded.  Numbers below are dependent on board configuration.
-| FLASH, SDRAM, DRAM numbers can be affected by actual board setup.
-|
-|    FFE0,0000 - FFFF,FFFF        FLASH
-|    F200,0000 - F210,FFFF        FPGA logic
-|                                   Ethernet       = F200,0000
-|                                   LED Display    = F200,0100
-|                                   Xilinx #1 Regs = F204,0000
-|                                   Xilinx #2 Regs = F208,0000
-|                                   Spare          = F20C,0000
-|                                   IDE CS0        = F210,0000
-|    F410,0000 - F410,FFFF        IDE CS1
-|    C000,0000 - C7FF,FFFF        OBP
-|    C000,0000 - C000,0014        SICC  (16550 + infra red)
-|    C001,0000 - C001,0018        PPU   (Parallel Port)
-|    C002,0000 - C002,001B        SC0   (Smart Card 0)
-|    C003,0000 - C003,000F        I2C0
-|    C004,0000 - C004,0009        SCC   (16550 UART)
-|    C005,0000 - C005,0124        GPT   (Timers)
-|    C006,0000 - C006,0058        GPIO0
-|    C007,0000 - C007,001b        SC1   (Smart Card 1)
-|    C008,0000 - C008,FFFF        Unused
-|    C009,0000 - C009,FFFF        Unused
-|    C00A,0000 - C00A,FFFF        Unused
-|    C00B,0000 - C00B,000F        I2C1
-|    C00C,0000 - C00C,0006        SCP
-|    C00D,0000 - C00D,0010        SSP
-|    A000,0000 - A0FF,FFFF        SDRAM1  (16M)
-|    0000,0000 - 00FF,FFFF        SDRAM0  (16M)
-+----------------------------------------------------------------------------*/
-#define STB_FLASH_BASE_ADDRESS  0xFFE00000
-#define STB_FPGA_BASE_ADDRESS   0xF2000000
-#define STB_SICC_BASE_ADDRESS   0xC0000000
-#define STB_PPU_BASE_ADDR       0xC0010000
-#define STB_SC0_BASE_ADDRESS    0xC0020000
-#define STB_I2C1_BASE_ADDRESS   0xC0030000
-#define STB_SCC_BASE_ADDRESS    0xC0040000
-#define STB_TIMERS_BASE_ADDRESS 0xC0050000
-#define STB_GPIO0_BASE_ADDRESS  0xC0060000
-#define STB_SC1_BASE_ADDRESS    0xC0070000
-#define STB_I2C2_BASE_ADDRESS   0xC00B0000
-#define STB_SCP_BASE_ADDRESS    0xC00C0000
-#define STB_SSP_BASE_ADDRESS    0xC00D0000
-/*----------------------------------------------------------------------------+
-|The following are used by the IBM RTOS SW.
-|15-May-00 Changed these values to reflect movement of base addresses in
-|order to support 32MB of contiguous SDRAM space.
-|Points to the cacheable region since these values are used in IBM RTOS
-|to establish the vector address.
-+----------------------------------------------------------------------------*/
-#define STB_SDRAM1_BASE_ADDRESS 0x20000000
-#define STB_SDRAM1_SIZE         0x01000000
-#define STB_SDRAM0_BASE_ADDRESS 0x1F000000
-#define STB_SDRAM0_SIZE         0x01000000
-
-#else
-/*----------------------------------------------------------------------------+
-| ElPaso Overall Address Map (all addresses are double mapped, bit 0 of the
-| address is not decoded.  Numbers below are dependent on board configuration.
-| FLASH, SDRAM, DRAM numbers can be affected by actual board setup.  OPB
-| devices are inside the ElPaso chip.
-|    FFE0,0000 - FFFF,FFFF        FLASH
-|    F144,0000 - F104,FFFF        FPGA logic
-|    F140,0000 - F100,0000        ethernet (through FPGA logic)
-|    C000,0000 - C7FF,FFFF        OBP
-|    C000,0000 - C000,0014        SICC (16550+ infra red)
-|    C001,0000 - C001,0016        PPU (parallel port)
-|    C002,0000 - C002,001B        SC (smart card)
-|    C003,0000 - C003,000F        I2C 1
-|    C004,0000 - C004,0009        SCC (16550 UART)
-|    C005,0000 - C005,0124        Timers
-|    C006,0000 - C006,0058        GPIO0
-|    C007,0000 - C007,0058        GPIO1
-|    C008,0000 - C008,0058        GPIO2
-|    C009,0000 - C009,0058        GPIO3
-|    C00A,0000 - C00A,0058        GPIO4
-|    C00B,0000 - C00B,000F        I2C 2
-|    C00C,0000 - C00C,0006        SCP
-|    C00D,0000 - C00D,0006        SSP
-|    A000,0000 - A0FF,FFFF        SDRAM 16M
-|    0000,0000 - 00FF,FFFF        DRAM 16M
-+----------------------------------------------------------------------------*/
-#define STB_FLASH_BASE_ADDRESS  0xFFE00000
-#define STB_FPGA_BASE_ADDRESS   0xF1440000
-#define STB_ENET_BASE_ADDRESS   0xF1400000
-#define STB_SICC_BASE_ADDRESS   0xC0000000
-#define STB_PPU_BASE_ADDR       0xC0010000
-#define STB_SC_BASE_ADDRESS     0xC0020000
-#define STB_I2C1_BASE_ADDRESS   0xC0030000
-#define STB_SCC_BASE_ADDRESS    0xC0040000
-#define STB_TIMERS_BASE_ADDRESS 0xC0050000
-#define STB_GPIO0_BASE_ADDRESS  0xC0060000
-#define STB_GPIO1_BASE_ADDRESS  0xC0070000
-#define STB_GPIO2_BASE_ADDRESS  0xC0080000
-#define STB_GPIO3_BASE_ADDRESS  0xC0090000
-#define STB_GPIO4_BASE_ADDRESS  0xC00A0000
-#define STB_I2C2_BASE_ADDRESS   0xC00B0000
-#define STB_SCP_BASE_ADDRESS    0xC00C0000
-#define STB_SSP_BASE_ADDRESS    0xC00D0000
-#define STB_SDRAM_BASE_ADDRESS  0xA0000000
-#endif
-
-/*----------------------------------------------------------------------------+
-| Other common defines.
-+----------------------------------------------------------------------------*/
-#ifndef TRUE
-#define TRUE    1
-#endif
-
-#ifndef FALSE
-#define FALSE   0
-#endif
-
-#endif /* _stb_h_ */
diff --git a/arch/ppc/boot/simple/uartlite_tty.c b/arch/ppc/boot/simple/uartlite_tty.c
deleted file mode 100644
index ca1743e3e912..000000000000
--- a/arch/ppc/boot/simple/uartlite_tty.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Xilinx UARTLITE bootloader driver
- *
- * Copyright (c) 2007 Secret Lab Technologies Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-#define UARTLITE_BASEADDR ((void*)(XPAR_UARTLITE_0_BASEADDR))
-
-unsigned long
-serial_init(int chan, void *ignored)
-{
-	/* Clear the RX FIFO */
-	out_be32(UARTLITE_BASEADDR + 0x0C, 0x2);
-	return 0;
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x08) != 0); /* spin */
-	out_be32(UARTLITE_BASEADDR + 0x4, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) == 0); /* spin */
-	return in_be32(UARTLITE_BASEADDR);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) != 0);
-}
diff --git a/arch/ppc/boot/utils/.gitignore b/arch/ppc/boot/utils/.gitignore
deleted file mode 100644
index bbdfb3b9c532..000000000000
--- a/arch/ppc/boot/utils/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-mkprep
-mkbugboot
-mktree
diff --git a/arch/ppc/boot/utils/elf.pl b/arch/ppc/boot/utils/elf.pl
deleted file mode 100644
index d3e9d9d5b84e..000000000000
--- a/arch/ppc/boot/utils/elf.pl
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# ELF header field numbers
-#
-
-$e_ident	=  0;	# Identification bytes / magic number
-$e_type		=  1;	# ELF file type
-$e_machine	=  2;	# Target machine type
-$e_version	=  3;	# File version
-$e_entry	=  4;	# Start address
-$e_phoff	=  5;	# Program header file offset
-$e_shoff	=  6;	# Section header file offset
-$e_flags	=  7;	# File flags
-$e_ehsize	=  8;	# Size of ELF header
-$e_phentsize	=  9;	# Size of program header
-$e_phnum	= 10;	# Number of program header entries
-$e_shentsize	= 11;	# Size of section header
-$e_shnum	= 12;	# Number of section header entries
-$e_shstrndx	= 13;	# Section header table string index
-
-#
-# Section header field numbers
-#
-
-$sh_name	=  0;	# Section name
-$sh_type	=  1;	# Section header type
-$sh_flags	=  2;	# Section header flags
-$sh_addr	=  3;	# Virtual address
-$sh_offset	=  4;	# File offset
-$sh_size	=  5;	# Section size
-$sh_link	=  6;	# Miscellaneous info
-$sh_info	=  7;	# More miscellaneous info
-$sh_addralign	=  8;	# Memory alignment
-$sh_entsize	=  9;	# Entry size if this is a table
diff --git a/arch/ppc/boot/utils/mkbugboot.c b/arch/ppc/boot/utils/mkbugboot.c
deleted file mode 100644
index 1640c4199ca6..000000000000
--- a/arch/ppc/boot/utils/mkbugboot.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Makes a Motorola PPCBUG ROM bootable image which can be flashed
- * into one of the FLASH banks on a Motorola PowerPlus board.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#define ELF_HEADER_SIZE	65536
-
-#include <unistd.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <netinet/in.h>
-#ifdef __sun__
-#include <inttypes.h>
-#else
-#include <stdint.h>
-#endif
-
-/* size of read buffer */
-#define SIZE 0x1000
-
-/* PPCBUG ROM boot header */
-typedef struct bug_boot_header {
-  uint8_t	magic_word[4];		/* "BOOT" */
-  uint32_t	entry_offset;		/* Offset from top of header to code */
-  uint32_t	routine_length;		/* Length of code */
-  uint8_t	routine_name[8];	/* Name of the boot code */
-} bug_boot_header_t;
-
-#define HEADER_SIZE	sizeof(bug_boot_header_t)
-
-void update_checksum(void *buf, size_t size, uint16_t *sum)
-{
-	uint32_t csum = *sum;
-
-	while (size) {
-		csum += *(uint16_t *)buf;
-		if (csum > 0xffff)
-			csum -= 0xffff;
-		buf = (uint16_t *)buf + 1;
-		size -= 2;
-	}
-	*sum = csum;
-}
-
-uint32_t copy_image(int in_fd, int out_fd, uint16_t *sum)
-{
-	uint8_t buf[SIZE];
-	int offset = 0;
-	int n;
-	uint32_t image_size = 0;
-
-	lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET);
-
-	/* Copy an image while recording its size */
-	while ( (n = read(in_fd, buf + offset, SIZE - offset)) > 0 ) {
-		n += offset;
-		offset = n & 1;
-		n -= offset;
-		image_size = image_size + n;
-		/* who's going to deal with short writes? */
-		write(out_fd, buf, n);
-		update_checksum(buf, n, sum);
-		if (offset)
-			buf[0] = buf[n];
-	}
-
-	/* BUG romboot requires that our size is divisible by 2 */
-	/* align image to 2 byte boundary */
-	if (offset) {
-		image_size += 2;
-		buf[1] = '\0';
-		write(out_fd, buf, 2);
-		update_checksum(buf, 2, sum);
-	}
-	return image_size;
-}
-
-void write_bugboot_header(int out_fd, uint32_t boot_size, uint16_t *sum)
-{
-	static bug_boot_header_t bbh = {
-		.magic_word = "BOOT",
-		.routine_name = "LINUXROM"
-	};
-
-	/* Fill in the PPCBUG ROM boot header */
-	bbh.entry_offset = htonl(HEADER_SIZE);	/* Entry address */
-	bbh.routine_length= htonl(HEADER_SIZE+boot_size+2);	/* Routine length */
-
-	/* Output the header and bootloader to the file */
-	write(out_fd, &bbh, sizeof(bug_boot_header_t));
-	update_checksum(&bbh, sizeof(bug_boot_header_t), sum);
-}
-
-int main(int argc, char *argv[])
-{
-	int image_fd, bugboot_fd;
-	uint32_t kernel_size = 0;
-	uint16_t checksum = 0;
-
-	if (argc != 3) {
-		fprintf(stderr, "usage: %s <kernel_image> <bugboot>\n",argv[0]);
-		exit(-1);
-	}
-
-	/* Get file args */
-
-	/* kernel image file */
-	if ((image_fd = open(argv[1] , 0)) < 0)
-		exit(-1);
-
-	/* bugboot file */
-	if (!strcmp(argv[2], "-"))
-		bugboot_fd = 1;			/* stdout */
-	else if ((bugboot_fd = creat(argv[2] , 0755)) < 0)
-		exit(-1);
-
-	/* Set file position after ROM header block where zImage will be written */
-	lseek(bugboot_fd, HEADER_SIZE, SEEK_SET);
-
-	/* Copy kernel image into bugboot image */
-	kernel_size = copy_image(image_fd, bugboot_fd, &checksum);
-
-	/* Set file position to beginning where header/romboot will be written */
-	lseek(bugboot_fd, 0, SEEK_SET);
-
-	/* Write out BUG header/romboot */
-	write_bugboot_header(bugboot_fd, kernel_size, &checksum);
-
-	/* Write out the calculated checksum */
-	lseek(bugboot_fd, 0, SEEK_END);
-	write(bugboot_fd, &checksum, 2);
-
-	/* Close bugboot file */
-	close(bugboot_fd);
-	return 0;
-}
diff --git a/arch/ppc/boot/utils/mkprep.c b/arch/ppc/boot/utils/mkprep.c
deleted file mode 100644
index 192bb397126f..000000000000
--- a/arch/ppc/boot/utils/mkprep.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Makes a prep bootable image which can be dd'd onto
- * a disk device to make a bootdisk.  Will take
- * as input a elf executable, strip off the header
- * and write out a boot image as:
- * 1) default - strips elf header
- *      suitable as a network boot image
- * 2) -pbp - strips elf header and writes out prep boot partition image
- *      cat or dd onto disk for booting
- * 3) -asm - strips elf header and writes out as asm data
- *      useful for generating data for a compressed image
- *                  -- Cort
- *
- * Modified for x86 hosted builds by Matt Porter <porter@neta.com>
- * Modified for Sparc hosted builds by Peter Wahl <PeterWahl@web.de>
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-/* size of read buffer */
-#define SIZE 0x1000
-
-/*
- * Partition table entry
- *  - from the PReP spec
- */
-typedef struct partition_entry {
-	unsigned char boot_indicator;
-	unsigned char starting_head;
-	unsigned char starting_sector;
-	unsigned char starting_cylinder;
-
-	unsigned char system_indicator;
-	unsigned char ending_head;
-	unsigned char ending_sector;
-	unsigned char ending_cylinder;
-
-	unsigned char beginning_sector[4];
-	unsigned char number_of_sectors[4];
-} partition_entry_t;
-
-#define BootActive	0x80
-#define SystemPrep	0x41
-
-void copy_image(FILE *, FILE *);
-void write_prep_partition(FILE *, FILE *);
-void write_asm_data(FILE *, FILE *);
-
-unsigned int elfhdr_size = 65536;
-
-int main(int argc, char *argv[])
-{
-	FILE *in, *out;
-	int argptr = 1;
-	int prep = 0;
-	int asmoutput = 0;
-
-	if (argc < 3 || argc > 4) {
-		fprintf(stderr, "usage: %s [-pbp] [-asm] <boot-file> <image>\n",
-			argv[0]);
-		exit(-1);
-	}
-
-/* needs to handle args more elegantly -- but this is a small/simple program */
-
-	/* check for -pbp */
-	if (!strcmp(argv[argptr], "-pbp")) {
-		prep = 1;
-		argptr++;
-	}
-
-	/* check for -asm */
-	if (!strcmp(argv[argptr], "-asm")) {
-		asmoutput = 1;
-		argptr++;
-	}
-
-	/* input file */
-	if (!strcmp(argv[argptr], "-"))
-		in = stdin;
-	else if (!(in = fopen(argv[argptr], "r")))
-		exit(-1);
-	argptr++;
-
-	/* output file */
-	if (!strcmp(argv[argptr], "-"))
-		out = stdout;
-	else if (!(out = fopen(argv[argptr], "w")))
-		exit(-1);
-	argptr++;
-
-	/* skip elf header in input file */
-	/*if ( !prep )*/
-	fseek(in, elfhdr_size, SEEK_SET);
-
-	/* write prep partition if necessary */
-	if (prep)
-		write_prep_partition(in, out);
-
-	/* write input image to bootimage */
-	if (asmoutput)
-		write_asm_data(in, out);
-	else
-		copy_image(in, out);
-
-	return 0;
-}
-
-void store_le32(unsigned int v, unsigned char *p)
-{
-	p[0] = v;
-	p[1] = v >>= 8;
-	p[2] = v >>= 8;
-	p[3] = v >> 8;
-}
-
-void write_prep_partition(FILE *in, FILE *out)
-{
-	unsigned char block[512];
-	partition_entry_t pe;
-	unsigned char *entry  = block;
-	unsigned char *length = block + 4;
-	long pos = ftell(in), size;
-
-	if (fseek(in, 0, SEEK_END) < 0) {
-		fprintf(stderr,"info failed\n");
-		exit(-1);
-	}
-	size = ftell(in);
-	if (fseek(in, pos, SEEK_SET) < 0) {
-		fprintf(stderr,"info failed\n");
-		exit(-1);
-	}
-
-	memset(block, '\0', sizeof(block));
-
-	/* set entry point and boot image size skipping over elf header */
-	store_le32(0x400/*+65536*/, entry);
-	store_le32(size-elfhdr_size+0x400, length);
-
-	/* sets magic number for msdos partition (used by linux) */
-	block[510] = 0x55;
-	block[511] = 0xAA;
-
-	/*
-	* Build a "PReP" partition table entry in the boot record
-	*  - "PReP" may only look at the system_indicator
-	*/
-	pe.boot_indicator   = BootActive;
-	pe.system_indicator = SystemPrep;
-	/*
-	* The first block of the diskette is used by this "boot record" which
-	* actually contains the partition table. (The first block of the
-	* partition contains the boot image, but I digress...)  We'll set up
-	* one partition on the diskette and it shall contain the rest of the
-	* diskette.
-	*/
-	pe.starting_head     = 0;	/* zero-based			     */
-	pe.starting_sector   = 2;	/* one-based			     */
-	pe.starting_cylinder = 0;	/* zero-based			     */
-	pe.ending_head       = 1;	/* assumes two heads		     */
-	pe.ending_sector     = 18;	/* assumes 18 sectors/track	     */
-	pe.ending_cylinder   = 79;	/* assumes 80 cylinders/diskette     */
-
-	/*
-	* The "PReP" software ignores the above fields and just looks at
-	* the next two.
-	*   - size of the diskette is (assumed to be)
-	*     (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette)
-	*   - unlike the above sector numbers, the beginning sector is zero-based!
-	*/
-#if 0
-	store_le32(1, pe.beginning_sector);
-#else
-	/* This has to be 0 on the PowerStack? */
-	store_le32(0, pe.beginning_sector);
-#endif
-
-	store_le32(2*18*80-1, pe.number_of_sectors);
-
-	memcpy(&block[0x1BE], &pe, sizeof(pe));
-
-	fwrite(block, sizeof(block), 1, out);
-	fwrite(entry, 4, 1, out);
-	fwrite(length, 4, 1, out);
-	/* set file position to 2nd sector where image will be written */
-	fseek( out, 0x400, SEEK_SET );
-}
-
-
-
-void copy_image(FILE *in, FILE *out)
-{
-	char buf[SIZE];
-	int n;
-
-	while ( (n = fread(buf, 1, SIZE, in)) > 0 )
-		fwrite(buf, 1, n, out);
-}
-
-
-void
-write_asm_data(FILE *in, FILE *out)
-{
-	int i, cnt, pos = 0;
-	unsigned int cksum = 0, val;
-	unsigned char *lp;
-	unsigned char buf[SIZE];
-	size_t len;
-
-	fputs("\t.data\n\t.globl input_data\ninput_data:\n", out);
-	while ((len = fread(buf, 1, sizeof(buf), in)) > 0) {
-		cnt = 0;
-		lp = buf;
-		/* Round up to longwords */
-		while (len & 3)
-			buf[len++] = '\0';
-		for (i = 0;  i < len;  i += 4) {
-			if (cnt == 0)
-				fputs("\t.long\t", out);
-			fprintf(out, "0x%02X%02X%02X%02X",
-				lp[0], lp[1], lp[2], lp[3]);
-			val = *(unsigned long *)lp;
-			cksum ^= val;
-			lp += 4;
-			if (++cnt == 4) {
-				cnt = 0;
-				fprintf(out, " # %x \n", pos+i-12);
-			} else {
-				fputs(",", out);
-			}
-		}
-		if (cnt)
-			fputs("0\n", out);
-		pos += len;
-	}
-	fprintf(out, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos);
-	fprintf(stderr, "cksum = %x\n", cksum);
-}
diff --git a/arch/ppc/boot/utils/mktree.c b/arch/ppc/boot/utils/mktree.c
deleted file mode 100644
index 2be22e28f2b3..000000000000
--- a/arch/ppc/boot/utils/mktree.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Makes a tree bootable image for IBM Evaluation boards.
- * Basically, just take a zImage, skip the ELF header, and stuff
- * a 32 byte header on the front.
- *
- * We use htonl, which is a network macro, to make sure we're doing
- * The Right Thing on an LE machine.  It's non-obvious, but it should
- * work on anything BSD'ish.
- */
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <netinet/in.h>
-#ifdef __sun__
-#include <inttypes.h>
-#else
-#include <stdint.h>
-#endif
-
-/* This gets tacked on the front of the image.  There are also a few
- * bytes allocated after the _start label used by the boot rom (see
- * head.S for details).
- */
-typedef struct boot_block {
-	uint32_t bb_magic;		/* 0x0052504F */
-	uint32_t bb_dest;		/* Target address of the image */
-	uint32_t bb_num_512blocks;	/* Size, rounded-up, in 512 byte blks */
-	uint32_t bb_debug_flag;	/* Run debugger or image after load */
-	uint32_t bb_entry_point;	/* The image address to start */
-	uint32_t bb_checksum;	/* 32 bit checksum including header */
-	uint32_t reserved[2];
-} boot_block_t;
-
-#define IMGBLK	512
-char	tmpbuf[IMGBLK];
-
-int main(int argc, char *argv[])
-{
-	int	in_fd, out_fd;
-	int	nblks, i;
-	uint	cksum, *cp;
-	struct	stat	st;
-	boot_block_t	bt;
-
-	if (argc < 3) {
-		fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]);
-		exit(1);
-	}
-
-	if (stat(argv[1], &st) < 0) {
-		perror("stat");
-		exit(2);
-	}
-
-	nblks = (st.st_size + IMGBLK) / IMGBLK;
-
-	bt.bb_magic = htonl(0x0052504F);
-
-	/* If we have the optional entry point parameter, use it */
-	if (argc == 4)
-		bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0));
-	else
-		bt.bb_dest = bt.bb_entry_point = htonl(0x500000);
-
-	/* We know these from the linker command.
-	 * ...and then move it up into memory a little more so the
-	 * relocation can happen.
-	 */
-	bt.bb_num_512blocks = htonl(nblks);
-	bt.bb_debug_flag = 0;
-
-	bt.bb_checksum = 0;
-
-	/* To be neat and tidy :-).
-	*/
-	bt.reserved[0] = 0;
-	bt.reserved[1] = 0;
-
-	if ((in_fd = open(argv[1], O_RDONLY)) < 0) {
-		perror("zImage open");
-		exit(3);
-	}
-
-	if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) {
-		perror("bootfile open");
-		exit(3);
-	}
-
-	cksum = 0;
-	cp = (void *)&bt;
-	for (i=0; i<sizeof(bt)/sizeof(uint); i++)
-		cksum += *cp++;
-	
-	/* Assume zImage is an ELF file, and skip the 64K header.
-	*/
-	if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
-		fprintf(stderr, "%s is too small to be an ELF image\n",
-				argv[1]);
-		exit(4);
-	}
-
-	if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
-		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
-		exit(4);
-	}
-
-	if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) {
-		fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]);
-		exit(4);
-	}
-
-	nblks -= (64 * 1024) / IMGBLK;
-
-	/* And away we go......
-	*/
-	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
-		perror("boot-image write");
-		exit(5);
-	}
-
-	while (nblks-- > 0) {
-		if (read(in_fd, tmpbuf, IMGBLK) < 0) {
-			perror("zImage read");
-			exit(5);
-		}
-		cp = (uint *)tmpbuf;
-		for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
-			cksum += *cp++;
-		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
-			perror("boot-image write");
-			exit(5);
-		}
-	}
-
-	/* rewrite the header with the computed checksum.
-	*/
-	bt.bb_checksum = htonl(cksum);
-	if (lseek(out_fd, 0, SEEK_SET) < 0) {
-		perror("rewrite seek");
-		exit(1);
-	}
-	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
-		perror("boot-image rewrite");
-		exit(1);
-	}
-
-	exit(0);
-}
diff --git a/arch/ppc/configs/FADS_defconfig b/arch/ppc/configs/FADS_defconfig
deleted file mode 100644
index c1934f828a4b..000000000000
--- a/arch/ppc/configs/FADS_defconfig
+++ /dev/null
@@ -1,520 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-CONFIG_FADS=y
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-# CONFIG_SERIAL_CPM_ALT_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/IVMS8_defconfig b/arch/ppc/configs/IVMS8_defconfig
deleted file mode 100644
index 66bbefe8e9b3..000000000000
--- a/arch/ppc/configs/IVMS8_defconfig
+++ /dev/null
@@ -1,548 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-CONFIG_IVMS8=y
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_MPC8xx_IDE=y
-CONFIG_IDE_8xx_PCCARD=y
-# CONFIG_IDE_8xx_DIRECT is not set
-# CONFIG_IDE_EXT_DIRECT is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-# CONFIG_SERIAL_CPM_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-CONFIG_USE_MDIO=y
-CONFIG_FEC_AM79C874=y
-CONFIG_FEC_LXT970=y
-CONFIG_FEC_LXT971=y
-CONFIG_FEC_QS6612=y
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM823L_defconfig b/arch/ppc/configs/TQM823L_defconfig
deleted file mode 100644
index 3b44f3d79bf6..000000000000
--- a/arch/ppc/configs/TQM823L_defconfig
+++ /dev/null
@@ -1,521 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-CONFIG_TQM823L=y
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-CONFIG_TQM8xxL=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_SERIAL_CPM_ALT_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM8260_defconfig b/arch/ppc/configs/TQM8260_defconfig
deleted file mode 100644
index 57cfa83d12d9..000000000000
--- a/arch/ppc/configs/TQM8260_defconfig
+++ /dev/null
@@ -1,499 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_8260=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-CONFIG_TQM8260=y
-# CONFIG_WILLOW_1 is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PC_KEYBOARD is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
-
-#
-# MPC8260 CPM Options
-#
-CONFIG_SCC_CONSOLE=y
-# CONFIG_FCC1_ENET is not set
-CONFIG_FCC2_ENET=y
-# CONFIG_FCC3_ENET is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM850L_defconfig b/arch/ppc/configs/TQM850L_defconfig
deleted file mode 100644
index b02d19630e31..000000000000
--- a/arch/ppc/configs/TQM850L_defconfig
+++ /dev/null
@@ -1,521 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-CONFIG_TQM850L=y
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-CONFIG_TQM8xxL=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_SERIAL_CPM_ALT_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-CONFIG_8xx_CPU6=y
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM860L_defconfig b/arch/ppc/configs/TQM860L_defconfig
deleted file mode 100644
index 857e4ab28011..000000000000
--- a/arch/ppc/configs/TQM860L_defconfig
+++ /dev/null
@@ -1,549 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-CONFIG_TQM860L=y
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-CONFIG_TQM8xxL=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_MPC8xx_IDE=y
-CONFIG_IDE_8xx_PCCARD=y
-# CONFIG_IDE_8xx_DIRECT is not set
-# CONFIG_IDE_EXT_DIRECT is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/bamboo_defconfig b/arch/ppc/configs/bamboo_defconfig
deleted file mode 100644
index 41fd3938fa5c..000000000000
--- a/arch/ppc/configs/bamboo_defconfig
+++ /dev/null
@@ -1,944 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Tue Jun 28 15:24:25 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_BAMBOO=y
-# CONFIG_EBONY is not set
-# CONFIG_LUAN is not set
-# CONFIG_OCOTEA is not set
-CONFIG_440EP=y
-CONFIG_440=y
-CONFIG_IBM440EP_ERR42=y
-CONFIG_IBM_OCP=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/bseip_defconfig b/arch/ppc/configs/bseip_defconfig
deleted file mode 100644
index ce9f9f77f2ee..000000000000
--- a/arch/ppc/configs/bseip_defconfig
+++ /dev/null
@@ -1,517 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-CONFIG_BSEIP=y
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-# CONFIG_ENET_BIG_BUFFERS is not set
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/bubinga_defconfig b/arch/ppc/configs/bubinga_defconfig
deleted file mode 100644
index ebec8013102c..000000000000
--- a/arch/ppc/configs/bubinga_defconfig
+++ /dev/null
@@ -1,592 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-CONFIG_BUBINGA=y
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405EP=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/chestnut_defconfig b/arch/ppc/configs/chestnut_defconfig
deleted file mode 100644
index e219aad4d0e3..000000000000
--- a/arch/ppc/configs/chestnut_defconfig
+++ /dev/null
@@ -1,794 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Fri Mar 11 14:32:49 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-CONFIG_CHESTNUT=y
-# CONFIG_SPRUCE is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200 ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_CONSISTENT_START_BOOL is not set
-CONFIG_CONSISTENT_START=0xff100000
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-CONFIG_CONSISTENT_SIZE=0x00200000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfc000000
-CONFIG_MTD_PHYSMAP_LEN=0x02000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MPSC is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/cpci405_defconfig b/arch/ppc/configs/cpci405_defconfig
deleted file mode 100644
index a336ffa8ff41..000000000000
--- a/arch/ppc/configs/cpci405_defconfig
+++ /dev/null
@@ -1,631 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-CONFIG_CPCI405=y
-# CONFIG_EP405 is not set
-# CONFIG_EVB405EP is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_405GP=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/cpci690_defconfig b/arch/ppc/configs/cpci690_defconfig
deleted file mode 100644
index ff3f7e02ab0f..000000000000
--- a/arch/ppc/configs/cpci690_defconfig
+++ /dev/null
@@ -1,798 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep  1 17:10:37 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Performance-monitoring counters support
-#
-# CONFIG_PERFCTR is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-CONFIG_CPCI690=y
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-# CONFIG_EV64360 is not set
-CONFIG_GT64260=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-CONFIG_HIGHMEM=y
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0 ip=on"
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISER4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/ebony_defconfig b/arch/ppc/configs/ebony_defconfig
deleted file mode 100644
index c8deca3b4545..000000000000
--- a/arch/ppc/configs/ebony_defconfig
+++ /dev/null
@@ -1,585 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EBONY=y
-# CONFIG_OCOTEA is not set
-CONFIG_440GP=y
-CONFIG_440=y
-CONFIG_IBM_OCP=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_LBD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ep405_defconfig b/arch/ppc/configs/ep405_defconfig
deleted file mode 100644
index 880b5f8d30c3..000000000000
--- a/arch/ppc/configs/ep405_defconfig
+++ /dev/null
@@ -1,572 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-CONFIG_EP405=y
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-# CONFIG_EP405PC is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GP=y
-CONFIG_EMBEDDEDBOOT=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/est8260_defconfig b/arch/ppc/configs/est8260_defconfig
deleted file mode 100644
index b3f6446bb083..000000000000
--- a/arch/ppc/configs/est8260_defconfig
+++ /dev/null
@@ -1,491 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_8260=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_EST8260=y
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_WILLOW_1 is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PC_KEYBOARD is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_SCC_ENET=y
-# CONFIG_FEC_ENET is not set
-
-#
-# MPC8260 CPM Options
-#
-CONFIG_SCC_CONSOLE=y
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ev64260_defconfig b/arch/ppc/configs/ev64260_defconfig
deleted file mode 100644
index 587e9a3b9491..000000000000
--- a/arch/ppc/configs/ev64260_defconfig
+++ /dev/null
@@ -1,758 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Fri Nov 19 11:17:02 2004
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_SPRUCE is not set
-CONFIG_EV64260=y
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_LITE5200 is not set
-CONFIG_GT64260=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xfbe00000
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200 ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ev64360_defconfig b/arch/ppc/configs/ev64360_defconfig
deleted file mode 100644
index f297c4bb632b..000000000000
--- a/arch/ppc/configs/ev64360_defconfig
+++ /dev/null
@@ -1,817 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Fri Oct 28 19:15:34 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_EV64360=y
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_CONSISTENT_START_BOOL is not set
-CONFIG_CONSISTENT_START=0xff100000
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-CONFIG_CONSISTENT_SIZE=0x00200000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xff000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-# CONFIG_MV643XX_ETH_1 is not set
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_MV64X60_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/hdpu_defconfig b/arch/ppc/configs/hdpu_defconfig
deleted file mode 100644
index 956a17897e33..000000000000
--- a/arch/ppc/configs/hdpu_defconfig
+++ /dev/null
@@ -1,890 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar 16 12:43:19 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-CONFIG_HDPU=y
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_NR_CPUS is not set
-CONFIG_PREEMPT=y
-CONFIG_HIGHMEM=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="root=/dev/nfs ip=auto"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START_BOOL=y
-CONFIG_KERNEL_START=0x80000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfc000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-# CONFIG_MV643XX_ETH_1 is not set
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/katana_defconfig b/arch/ppc/configs/katana_defconfig
deleted file mode 100644
index 7311fe6b42de..000000000000
--- a/arch/ppc/configs/katana_defconfig
+++ /dev/null
@@ -1,948 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep  1 17:16:03 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Performance-monitoring counters support
-#
-# CONFIG_PERFCTR is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-CONFIG_KATANA=y
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-# CONFIG_EV64360 is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf8100000
-CONFIG_MV64X60_NEW_BASE=0xf8100000
-# CONFIG_SMP is not set
-CONFIG_HIGHMEM=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0 ip=on"
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START_BOOL=y
-CONFIG_CONSISTENT_START=0xf0000000
-CONFIG_CONSISTENT_SIZE_BOOL=y
-CONFIG_CONSISTENT_SIZE=0x00400000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xe0000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-CONFIG_MV643XX_ETH_2=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_MV64XXX=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_M41T00=y
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISER4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/lite5200_defconfig b/arch/ppc/configs/lite5200_defconfig
deleted file mode 100644
index 7e7a943d8cfe..000000000000
--- a/arch/ppc/configs/lite5200_defconfig
+++ /dev/null
@@ -1,436 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_FSL_OCP=y
-CONFIG_PPC_STD_MMU=y
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-CONFIG_LITE5200=y
-CONFIG_PPC_MPC52xx=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 root=/dev/ram0 rw"
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Macintosh device drivers
-#
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_MPC52xx=y
-CONFIG_SERIAL_MPC52xx_CONSOLE=y
-CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-#
-# Misc devices
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-# CONFIG_USB is not set
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-#
-# Library routines
-#
-# CONFIG_CRC16 is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_SERIAL_TEXT_DEBUG=y
-CONFIG_PPC_OCP=y
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/lopec_defconfig b/arch/ppc/configs/lopec_defconfig
deleted file mode 100644
index 85ea06b3b5c6..000000000000
--- a/arch/ppc/configs/lopec_defconfig
+++ /dev/null
@@ -1,814 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-CONFIG_LOPEC=y
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_EPIC_SERIAL_MODE=y
-CONFIG_MPC10X_BRIDGE=y
-# CONFIG_MPC10X_STORE_GATHERING is not set
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_ADMA=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_UHCI_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-CONFIG_USB_HID=m
-
-#
-# Input core support is needed for USB HID input layer or HIDBP support
-#
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/luan_defconfig b/arch/ppc/configs/luan_defconfig
deleted file mode 100644
index 71d7bf192e0e..000000000000
--- a/arch/ppc/configs/luan_defconfig
+++ /dev/null
@@ -1,668 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Mon Jan 31 16:26:31 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_EBONY is not set
-CONFIG_LUAN=y
-# CONFIG_OCOTEA is not set
-CONFIG_440SP=y
-CONFIG_440=y
-CONFIG_IBM_OCP=y
-CONFIG_IBM_EMAC4=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on console=ttyS0,115200"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mbx_defconfig b/arch/ppc/configs/mbx_defconfig
deleted file mode 100644
index 52c3799e67ba..000000000000
--- a/arch/ppc/configs/mbx_defconfig
+++ /dev/null
@@ -1,512 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-CONFIG_MBX=y
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-CONFIG_SERIAL_CPM_SCC2=y
-CONFIG_SERIAL_CPM_SCC3=y
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-CONFIG_8xx_CPU6=y
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ml300_defconfig b/arch/ppc/configs/ml300_defconfig
deleted file mode 100644
index d66cacdb95be..000000000000
--- a/arch/ppc/configs/ml300_defconfig
+++ /dev/null
@@ -1,739 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Wed Jan 18 00:49:20 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_LBD=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-# CONFIG_WANT_EARLY_SERIAL is not set
-
-#
-# IBM 4xx options
-#
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_XILINX_ML300=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_XILINX_VIRTEX=y
-CONFIG_EMBEDDEDBOOT=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,9600"
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_IBM_EMAC is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/ml403_defconfig b/arch/ppc/configs/ml403_defconfig
deleted file mode 100644
index 71bcfa7ab7f7..000000000000
--- a/arch/ppc/configs/ml403_defconfig
+++ /dev/null
@@ -1,740 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Wed Jan 18 01:11:41 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_LBD=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-# CONFIG_WANT_EARLY_SERIAL is not set
-
-#
-# IBM 4xx options
-#
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-# CONFIG_XILINX_ML300 is not set
-CONFIG_XILINX_ML403=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_XILINX_VIRTEX=y
-CONFIG_EMBEDDEDBOOT=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,9600"
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_IBM_EMAC is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mvme5100_defconfig b/arch/ppc/configs/mvme5100_defconfig
deleted file mode 100644
index 46776b9c1a33..000000000000
--- a/arch/ppc/configs/mvme5100_defconfig
+++ /dev/null
@@ -1,746 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.9-rc2
-# Wed Sep 22 09:53:26 2004
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-CONFIG_MVME5100=y
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MVME5100_IPMC761_PRESENT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=8
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=32
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-CONFIG_IP_NF_MATCH_HELPER=m
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ocotea_defconfig b/arch/ppc/configs/ocotea_defconfig
deleted file mode 100644
index 9dcf575c706f..000000000000
--- a/arch/ppc/configs/ocotea_defconfig
+++ /dev/null
@@ -1,599 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_EBONY is not set
-CONFIG_OCOTEA=y
-CONFIG_440GX=y
-CONFIG_440A=y
-CONFIG_IBM_OCP=y
-CONFIG_IBM_EMAC4=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on console=ttyS0,115200"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/pplus_defconfig b/arch/ppc/configs/pplus_defconfig
deleted file mode 100644
index 5e459bcbf591..000000000000
--- a/arch/ppc/configs/pplus_defconfig
+++ /dev/null
@@ -1,720 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-CONFIG_PPLUS=y
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PPCBUG_NVRAM is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_CRC32=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/prep_defconfig b/arch/ppc/configs/prep_defconfig
deleted file mode 100644
index b7cee2d71405..000000000000
--- a/arch/ppc/configs/prep_defconfig
+++ /dev/null
@@ -1,1679 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Wed Sep  6 15:09:32 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-prep"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC601_SYNC_FIX=y
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_PREP=y
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-# CONFIG_EV64360 is not set
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PREP_RESIDUAL=y
-CONFIG_PROC_PREPRESIDUAL=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA is not set
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CONNTRACK_NETLINK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
-CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_OUI_DB=y
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=y
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCMCIA_XIRTULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=y
-CONFIG_FB_MATROX_MAVEN=m
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ISA devices
-#
-CONFIG_SND_CS4231_LIB=m
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CS4231 is not set
-CONFIG_SND_CS4232=m
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_WAVEFRONT is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# Apple Onboard Audio driver
-#
-# CONFIG_SND_AOA is not set
-# CONFIG_SND_AOA_SOUNDBUS is not set
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_USX2Y is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/prpmc750_defconfig b/arch/ppc/configs/prpmc750_defconfig
deleted file mode 100644
index 82d52f66b742..000000000000
--- a/arch/ppc/configs/prpmc750_defconfig
+++ /dev/null
@@ -1,594 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-CONFIG_PRPMC750=y
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/prpmc800_defconfig b/arch/ppc/configs/prpmc800_defconfig
deleted file mode 100644
index 613c2664d3e8..000000000000
--- a/arch/ppc/configs/prpmc800_defconfig
+++ /dev/null
@@ -1,656 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-CONFIG_PRPMC800=y
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_NONMONARCH_SUPPORT is not set
-CONFIG_HARRIER=y
-# CONFIG_HARRIER_STORE_GATHERING is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/radstone_ppc7d_defconfig b/arch/ppc/configs/radstone_ppc7d_defconfig
deleted file mode 100644
index 9f64532f2a81..000000000000
--- a/arch/ppc/configs/radstone_ppc7d_defconfig
+++ /dev/null
@@ -1,991 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Tue Jul 26 00:02:09 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-CONFIG_RADSTONE_PPC7D=y
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xfef00000
-CONFIG_MV64X60_NEW_BASE=0xfef00000
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,9600"
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-CONFIG_R8169=y
-CONFIG_R8169_NAPI=y
-# CONFIG_SKGE is not set
-CONFIG_SK98LIN=y
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-# CONFIG_SERIAL_MPSC_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SENSOR=y
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-CONFIG_SENSORS_LM90=y
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/redwood5_defconfig b/arch/ppc/configs/redwood5_defconfig
deleted file mode 100644
index 4c5486da4139..000000000000
--- a/arch/ppc/configs/redwood5_defconfig
+++ /dev/null
@@ -1,557 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-CONFIG_REDWOOD_5=y
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_STB03xxx=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-# CONFIG_SERIAL_SICC is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IBM_EMAC is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/redwood6_defconfig b/arch/ppc/configs/redwood6_defconfig
deleted file mode 100644
index 5752845c2601..000000000000
--- a/arch/ppc/configs/redwood6_defconfig
+++ /dev/null
@@ -1,535 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-CONFIG_REDWOOD_6=y
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_STB03xxx=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-# CONFIG_SERIAL_SICC is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IBM_EMAC is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/rpx8260_defconfig b/arch/ppc/configs/rpx8260_defconfig
deleted file mode 100644
index a9c4544ae560..000000000000
--- a/arch/ppc/configs/rpx8260_defconfig
+++ /dev/null
@@ -1,555 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-CONFIG_RPX8260=y
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-CONFIG_8260=y
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-# CONFIG_SERIAL_CPM_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
-
-#
-# CPM2 Options
-#
-# CONFIG_FCC1_ENET is not set
-# CONFIG_FCC2_ENET is not set
-CONFIG_FCC3_ENET=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KGDB_CONSOLE is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/rpxcllf_defconfig b/arch/ppc/configs/rpxcllf_defconfig
deleted file mode 100644
index cf932f13fa86..000000000000
--- a/arch/ppc/configs/rpxcllf_defconfig
+++ /dev/null
@@ -1,582 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1
-# Mon Nov  1 16:41:04 2004
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-CONFIG_8xx=y
-# CONFIG_E500 is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_RPXLITE is not set
-CONFIG_RPXCLASSIC=y
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-CONFIG_SERIAL_CPM_SCC2=y
-CONFIG_SERIAL_CPM_SCC3=y
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/rpxlite_defconfig b/arch/ppc/configs/rpxlite_defconfig
deleted file mode 100644
index 828dd6eb5b43..000000000000
--- a/arch/ppc/configs/rpxlite_defconfig
+++ /dev/null
@@ -1,581 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1
-# Mon Nov  1 16:41:09 2004
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-CONFIG_8xx=y
-# CONFIG_E500 is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-CONFIG_RPXLITE=y
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-# CONFIG_SERIAL_CPM_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-# CONFIG_ENET_BIG_BUFFERS is not set
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/sandpoint_defconfig b/arch/ppc/configs/sandpoint_defconfig
deleted file mode 100644
index 9525e34138fc..000000000000
--- a/arch/ppc/configs/sandpoint_defconfig
+++ /dev/null
@@ -1,737 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-CONFIG_SANDPOINT=y
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-CONFIG_EPIC_SERIAL_MODE=y
-CONFIG_MPC10X_BRIDGE=y
-# CONFIG_MPC10X_STORE_GATHERING is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_TASKFILE_IO=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_SL82C105=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_UHCI_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-# CONFIG_USB_HID is not set
-
-#
-# Input core support is needed for USB HID input layer or HIDBP support
-#
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/spruce_defconfig b/arch/ppc/configs/spruce_defconfig
deleted file mode 100644
index 430dd9c59feb..000000000000
--- a/arch/ppc/configs/spruce_defconfig
+++ /dev/null
@@ -1,577 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-CONFIG_SPRUCE=y
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-CONFIG_SPRUCE_BAUD_33M=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_PCIPS2=y
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/sycamore_defconfig b/arch/ppc/configs/sycamore_defconfig
deleted file mode 100644
index 6996cca18f3e..000000000000
--- a/arch/ppc/configs/sycamore_defconfig
+++ /dev/null
@@ -1,663 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_EVB405EP is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-CONFIG_SYCAMORE=y
-# CONFIG_WALNUT is not set
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GPR=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/taishan_defconfig b/arch/ppc/configs/taishan_defconfig
deleted file mode 100644
index 1ca0204267b1..000000000000
--- a/arch/ppc/configs/taishan_defconfig
+++ /dev/null
@@ -1,1077 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Mon Feb 12 11:11:58 2007
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_DCR_NATIVE=y
-CONFIG_PPC_DCR=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-CONFIG_WANT_EARLY_SERIAL=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_BAMBOO is not set
-# CONFIG_EBONY is not set
-# CONFIG_LUAN is not set
-# CONFIG_YUCCA is not set
-# CONFIG_OCOTEA is not set
-CONFIG_TAISHAN=y
-CONFIG_440GX=y
-CONFIG_440A=y
-CONFIG_IBM_OCP=y
-CONFIG_IBM_EMAC4=y
-CONFIG_PPC4xx_DMA=y
-CONFIG_PPC4xx_EDMA=y
-CONFIG_PPC_GEN550=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on console=ttyS0,115200"
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_PPC_I8259 is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
-CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y
-# CONFIG_IBM_EMAC_DEBUG is not set
-CONFIG_IBM_EMAC_ZMII=y
-CONFIG_IBM_EMAC_RGMII=y
-CONFIG_IBM_EMAC_TAH=y
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPPOE=y
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/walnut_defconfig b/arch/ppc/configs/walnut_defconfig
deleted file mode 100644
index bf9721a7a818..000000000000
--- a/arch/ppc/configs/walnut_defconfig
+++ /dev/null
@@ -1,578 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-CONFIG_WALNUT=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GP=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
deleted file mode 100644
index 7b739054968f..000000000000
--- a/arch/ppc/kernel/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-extra-$(CONFIG_PPC_STD_MMU)	:= head.o
-extra-$(CONFIG_40x)		:= head_4xx.o
-extra-$(CONFIG_44x)		:= head_44x.o
-extra-$(CONFIG_8xx)		:= head_8xx.o
-extra-y				+= vmlinux.lds
-
-obj-y				:= entry.o traps.o time.o misc.o \
-					setup.o \
-					ppc_htab.o
-obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
-obj-$(CONFIG_PCI)		+= pci.o
-obj-$(CONFIG_KGDB)		+= ppc-stub.o
-obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
-
-ifndef CONFIG_MATH_EMULATION
-obj-$(CONFIG_8xx)		+= softemu8xx.o
-endif
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
deleted file mode 100644
index 8dcbdd6c2d2c..000000000000
--- a/arch/ppc/kernel/asm-offsets.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/suspend.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kbuild.h>
-
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/vdso_datapage.h>
-
-int
-main(void)
-{
-	DEFINE(THREAD, offsetof(struct task_struct, thread));
-	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
-	DEFINE(MM, offsetof(struct task_struct, mm));
-	DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
-	DEFINE(KSP, offsetof(struct thread_struct, ksp));
-	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
-	DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
-	DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
-	DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
-	DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr));
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
-	DEFINE(PT_PTRACED, PT_PTRACED);
-#endif
-#ifdef CONFIG_ALTIVEC
-	DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0]));
-	DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
-	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
-	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
-#endif /* CONFIG_ALTIVEC */
-	/* Interrupt register frame */
-	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
-	DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
-	/* in fact we only use gpr0 - gpr9 and gpr20 - gpr23 */
-	DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0]));
-	DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1]));
-	DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2]));
-	DEFINE(GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[3]));
-	DEFINE(GPR4, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[4]));
-	DEFINE(GPR5, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[5]));
-	DEFINE(GPR6, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[6]));
-	DEFINE(GPR7, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[7]));
-	DEFINE(GPR8, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[8]));
-	DEFINE(GPR9, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[9]));
-	DEFINE(GPR10, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[10]));
-	DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11]));
-	DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12]));
-	DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13]));
-	DEFINE(GPR14, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[14]));
-	DEFINE(GPR15, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[15]));
-	DEFINE(GPR16, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[16]));
-	DEFINE(GPR17, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[17]));
-	DEFINE(GPR18, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[18]));
-	DEFINE(GPR19, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[19]));
-	DEFINE(GPR20, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[20]));
-	DEFINE(GPR21, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[21]));
-	DEFINE(GPR22, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[22]));
-	DEFINE(GPR23, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[23]));
-	DEFINE(GPR24, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[24]));
-	DEFINE(GPR25, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[25]));
-	DEFINE(GPR26, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[26]));
-	DEFINE(GPR27, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[27]));
-	DEFINE(GPR28, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[28]));
-	DEFINE(GPR29, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[29]));
-	DEFINE(GPR30, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[30]));
-	DEFINE(GPR31, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[31]));
-	/* Note: these symbols include _ because they overlap with special
-	 * register names
-	 */
-	DEFINE(_NIP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, nip));
-	DEFINE(_MSR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, msr));
-	DEFINE(_CTR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ctr));
-	DEFINE(_LINK, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, link));
-	DEFINE(_CCR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ccr));
-	DEFINE(_MQ, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, mq));
-	DEFINE(_XER, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, xer));
-	DEFINE(_DAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
-	DEFINE(_DSISR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
-	/* The PowerPC 400-class & Book-E processors have neither the DAR nor the DSISR
-	 * SPRs. Hence, we overload them to hold the similar DEAR and ESR SPRs
-	 * for such processors.  For critical interrupts we use them to
-	 * hold SRR0 and SRR1.
-	 */
-	DEFINE(_DEAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
-	DEFINE(_ESR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
-	DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3));
-	DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result));
-	DEFINE(TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap));
-	DEFINE(CLONE_VM, CLONE_VM);
-	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
-	DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
-
-	/* About the CPU features table */
-	DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec));
-	DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask));
-	DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value));
-	DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
-	DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
-
-	DEFINE(TI_TASK, offsetof(struct thread_info, task));
-	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
-	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
-
-	DEFINE(pbe_address, offsetof(struct pbe, address));
-	DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
-	DEFINE(pbe_next, offsetof(struct pbe, next));
-
-	DEFINE(TASK_SIZE, TASK_SIZE);
-	DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
-
-	/* datapage offsets for use by vdso */
-	DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp));
-	DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec));
-	DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs));
-	DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec));
-	DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count));
-	DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest));
-	DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime));
-	DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32));
-	DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
-	DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
-	DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec));
-	DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec));
-	DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec));
-	DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec));
-
-	/* timeval/timezone offsets for use by vdso */
-	DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest));
-	DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime));
-
-	/* Other bits used by the vdso */
-	DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
-	DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
-	DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
-	DEFINE(CLOCK_REALTIME_RES, TICK_NSEC);
-
-	return 0;
-}
diff --git a/arch/ppc/kernel/cpu_setup_power4.S b/arch/ppc/kernel/cpu_setup_power4.S
deleted file mode 100644
index 6a674e834eeb..000000000000
--- a/arch/ppc/kernel/cpu_setup_power4.S
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * This file contains low level CPU setup functions.
- *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/ppc_asm.h>
-#include <asm/cputable.h>
-#include <asm/asm-offsets.h>
-#include <asm/cache.h>
-
-_GLOBAL(__970_cpu_preinit)
-	/*
-	 * Deal only with PPC970 and PPC970FX.
-	 */
-	mfspr	r0,SPRN_PVR
-	srwi	r0,r0,16
-	cmpwi	cr0,r0,0x39
-	cmpwi	cr1,r0,0x3c
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	bnelr
-
-	/* Make sure HID4:rm_ci is off before MMU is turned off, that large
-	 * pages are enabled with HID4:61 and clear HID5:DCBZ_size and
-	 * HID5:DCBZ32_ill
-	 */
-	li	r0,0
-	mfspr	r11,SPRN_HID4
-	rldimi	r11,r0,40,23	/* clear bit 23 (rm_ci) */
-	rldimi	r11,r0,2,61	/* clear bit 61 (lg_pg_en) */
-	sync
-	mtspr	SPRN_HID4,r11
-	isync
-	sync
-	mfspr	r11,SPRN_HID5
-	rldimi	r11,r0,6,56	/* clear bits 56 & 57 (DCBZ*) */
-	sync
-	mtspr	SPRN_HID5,r11
-	isync
-	sync
-
-	/* Setup some basic HID1 features */
-	mfspr	r0,SPRN_HID1
-	li	r11,0x1200		/* enable i-fetch cacheability */
-	sldi	r11,r11,44		/* and prefetch */
-	or	r0,r0,r11
-	mtspr	SPRN_HID1,r0
-	mtspr	SPRN_HID1,r0
-	isync
-
-	/* Clear HIOR */
-	li	r0,0
-	sync
-	mtspr	SPRN_HIOR,0		/* Clear interrupt prefix */
-	isync
-	blr
-
-_GLOBAL(__setup_cpu_ppc970)
-	mfspr	r0,SPRN_HID0
-	li	r11,5			/* clear DOZE and SLEEP */
-	rldimi	r0,r11,52,8		/* set NAP and DPM */
-	mtspr	SPRN_HID0,r0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	sync
-	isync
-	blr
-
-/* Definitions for the table use to save CPU states */
-#define CS_HID0		0
-#define CS_HID1		8
-#define	CS_HID4		16
-#define CS_HID5		24
-#define CS_SIZE		32
-
-	.data
-	.balign	L1_CACHE_BYTES
-cpu_state_storage:	
-	.space	CS_SIZE
-	.balign	L1_CACHE_BYTES,0
-	.text
-	
-/* Called in normal context to backup CPU 0 state. This
- * does not include cache settings. This function is also
- * called for machine sleep. This does not include the MMU
- * setup, BATs, etc... but rather the "special" registers
- * like HID0, HID1, HID4, etc...
- */
-_GLOBAL(__save_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,cpu_state_storage@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* We only deal with 970 for now */
-	mfspr	r0,SPRN_PVR
-	srwi	r0,r0,16
-	cmpwi	cr0,r0,0x39
-	cmpwi	cr1,r0,0x3c
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	bne	1f
-
-	/* Save HID0,1,4 and 5 */
-	mfspr	r3,SPRN_HID0
-	std	r3,CS_HID0(r5)
-	mfspr	r3,SPRN_HID1
-	std	r3,CS_HID1(r5)
-	mfspr	r3,SPRN_HID4
-	std	r3,CS_HID4(r5)
-	mfspr	r3,SPRN_HID5
-	std	r3,CS_HID5(r5)
-	
-1:
-	mtcr	r7
-	blr
-
-/* Called with no MMU context (typically MSR:IR/DR off) to
- * restore CPU state as backed up by the previous
- * function. This does not include cache setting
- */
-_GLOBAL(__restore_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,(cpu_state_storage-KERNELBASE)@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* We only deal with 970 for now */
-	mfspr	r0,SPRN_PVR
-	srwi	r0,r0,16
-	cmpwi	cr0,r0,0x39
-	cmpwi	cr1,r0,0x3c
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	bne	1f
-
-	/* Clear interrupt prefix */
-	li	r0,0
-	sync
-	mtspr	SPRN_HIOR,0
-	isync
-
-	/* Restore HID0 */
-	ld	r3,CS_HID0(r5)
-	sync
-	isync
-	mtspr	SPRN_HID0,r3
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	sync
-	isync
-
-	/* Restore HID1 */
-	ld	r3,CS_HID1(r5)
-	sync
-	isync
-	mtspr	SPRN_HID1,r3
-	mtspr	SPRN_HID1,r3
-	sync
-	isync
-	
-	/* Restore HID4 */
-	ld	r3,CS_HID4(r5)
-	sync
-	isync
-	mtspr	SPRN_HID4,r3
-	sync
-	isync
-
-	/* Restore HID5 */
-	ld	r3,CS_HID5(r5)
-	sync
-	isync
-	mtspr	SPRN_HID5,r3
-	sync
-	isync
-1:
-	mtcr	r7
-	blr
-
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
deleted file mode 100644
index 5f3a5d068a5c..000000000000
--- a/arch/ppc/kernel/entry.S
+++ /dev/null
@@ -1,960 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@fsmlabs.com) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@fsmlabs.com>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- *
- *  This file contains the system call entry code, context switch
- *  code, and exception/interrupt return code for PowerPC.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sys.h>
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/unistd.h>
-
-#undef SHOW_SYSCALLS
-#undef SHOW_SYSCALLS_TASK
-
-/*
- * MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE.
- */
-#if MSR_KERNEL >= 0x10000
-#define LOAD_MSR_KERNEL(r, x)	lis r,(x)@h; ori r,r,(x)@l
-#else
-#define LOAD_MSR_KERNEL(r, x)	li r,(x)
-#endif
-
-#ifdef CONFIG_BOOKE
-#include "head_booke.h"
-#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level)	\
-	mtspr	exc_level##_SPRG,r8;			\
-	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);		\
-	lwz	r0,GPR10-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR10(r11);				\
-	lwz	r0,GPR11-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR11(r11);				\
-	mfspr	r8,exc_level##_SPRG
-
-	.globl	mcheck_transfer_to_handler
-mcheck_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK)
-	b	transfer_to_handler_full
-
-	.globl	debug_transfer_to_handler
-debug_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG)
-	b	transfer_to_handler_full
-
-	.globl	crit_transfer_to_handler
-crit_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT)
-	/* fall through */
-#endif
-
-#ifdef CONFIG_40x
-	.globl	crit_transfer_to_handler
-crit_transfer_to_handler:
-	lwz	r0,crit_r10@l(0)
-	stw	r0,GPR10(r11)
-	lwz	r0,crit_r11@l(0)
-	stw	r0,GPR11(r11)
-	/* fall through */
-#endif
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception, turning
- * on address translation.
- * Note that we rely on the caller having set cr0.eq iff the exception
- * occurred in kernel mode (i.e. MSR:PR = 0).
- */
-	.globl	transfer_to_handler_full
-transfer_to_handler_full:
-	SAVE_NVGPRS(r11)
-	/* fall through */
-
-	.globl	transfer_to_handler
-transfer_to_handler:
-	stw	r2,GPR2(r11)
-	stw	r12,_NIP(r11)
-	stw	r9,_MSR(r11)
-	andi.	r2,r9,MSR_PR
-	mfctr	r12
-	mfspr	r2,SPRN_XER
-	stw	r12,_CTR(r11)
-	stw	r2,_XER(r11)
-	mfspr	r12,SPRN_SPRG3
-	addi	r2,r12,-THREAD
-	tovirt(r2,r2)			/* set r2 to current */
-	beq	2f			/* if from user, fix up THREAD.regs */
-	addi	r11,r1,STACK_FRAME_OVERHEAD
-	stw	r11,PT_REGS(r12)
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-	/* Check to see if the dbcr0 register is set up to debug.  Use the
-	   single-step bit to do this. */
-	lwz	r12,THREAD_DBCR0(r12)
-	andis.	r12,r12,DBCR0_IC@h
-	beq+	3f
-	/* From user and task is ptraced - load up global dbcr0 */
-	li	r12,-1			/* clear all pending debug events */
-	mtspr	SPRN_DBSR,r12
-	lis	r11,global_dbcr0@ha
-	tophys(r11,r11)
-	addi	r11,r11,global_dbcr0@l
-	lwz	r12,0(r11)
-	mtspr	SPRN_DBCR0,r12
-	lwz	r12,4(r11)
-	addi	r12,r12,-1
-	stw	r12,4(r11)
-#endif
-	b	3f
-
-2:	/* if from kernel, check interrupted DOZE/NAP mode and
-         * check for stack overflow
-         */
-	lwz	r9,THREAD_INFO-THREAD(r12)
-	cmplw	r1,r9			/* if r1 <= current->thread_info */
-	ble-	stack_ovf		/* then the kernel stack overflowed */
-5:
-#ifdef CONFIG_6xx
-	tophys(r9,r9)			/* check local flags */
-	lwz	r12,TI_LOCAL_FLAGS(r9)
-	mtcrf	0x01,r12
-	bt-	31-TLF_NAPPING,4f
-#endif /* CONFIG_6xx */
-	.globl transfer_to_handler_cont
-transfer_to_handler_cont:
-3:
-	mflr	r9
-	lwz	r11,0(r9)		/* virtual address of handler */
-	lwz	r9,4(r9)		/* where to go when done */
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r10
-	mtlr	r9
-	SYNC
-	RFI				/* jump to handler, enable MMU */
-
-#ifdef CONFIG_6xx
-4:	rlwinm	r12,r12,0,~_TLF_NAPPING
-	stw	r12,TI_LOCAL_FLAGS(r9)
-	b	power_save_6xx_restore
-#endif
-
-/*
- * On kernel stack overflow, load up an initial stack pointer
- * and call StackOverflow(regs), which should not return.
- */
-stack_ovf:
-	/* sometimes we use a statically-allocated stack, which is OK. */
-	lis	r12,_end@h
-	ori	r12,r12,_end@l
-	cmplw	r1,r12
-	ble	5b			/* r1 <= &_end is OK */
-	SAVE_NVGPRS(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
-	lis	r9,StackOverflow@ha
-	addi	r9,r9,StackOverflow@l
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	FIX_SRR1(r10,r12)
-	mtspr	SPRN_SRR0,r9
-	mtspr	SPRN_SRR1,r10
-	SYNC
-	RFI
-
-/*
- * Handle a system call.
- */
-	.stabs	"arch/ppc/kernel/",N_SO,0,0,0f
-	.stabs	"entry.S",N_SO,0,0,0f
-0:
-
-_GLOBAL(DoSyscall)
-	stw	r3,ORIG_GPR3(r1)
-	li	r12,0
-	stw	r12,RESULT(r1)
-	lwz	r11,_CCR(r1)	/* Clear SO bit in CR */
-	rlwinm	r11,r11,0,4,2
-	stw	r11,_CCR(r1)
-#ifdef SHOW_SYSCALLS
-	bl	do_show_syscall
-#endif /* SHOW_SYSCALLS */
-	rlwinm	r10,r1,0,0,18	/* current_thread_info() */
-	lwz	r11,TI_FLAGS(r10)
-	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
-	bne-	syscall_dotrace
-syscall_dotrace_cont:
-	cmplwi	0,r0,NR_syscalls
-	lis	r10,sys_call_table@h
-	ori	r10,r10,sys_call_table@l
-	slwi	r0,r0,2
-	bge-	66f
-	lwzx	r10,r10,r0	/* Fetch system call handler [ptr] */
-	mtlr	r10
-	addi	r9,r1,STACK_FRAME_OVERHEAD
-	PPC440EP_ERR42
-	blrl			/* Call handler */
-	.globl	ret_from_syscall
-ret_from_syscall:
-#ifdef SHOW_SYSCALLS
-	bl	do_show_syscall_exit
-#endif
-	mr	r6,r3
-	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
-	/* disable interrupts so current_thread_info()->flags can't change */
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
-	SYNC
-	MTMSRD(r10)
-	lwz	r9,TI_FLAGS(r12)
-	li	r8,-_LAST_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
-	bne-	syscall_exit_work
-	cmplw	0,r3,r8
-	blt+	syscall_exit_cont
-	lwz	r11,_CCR(r1)			/* Load CR */
-	neg	r3,r3
-	oris	r11,r11,0x1000	/* Set SO bit in CR */
-	stw	r11,_CCR(r1)
-syscall_exit_cont:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* If the process has its own DBCR0 value, load it up.  The single
-	   step bit tells us that dbcr0 should be loaded. */
-	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
-	bnel-	load_dbcr0
-#endif
-#ifdef CONFIG_44x
-	lis	r4,icache_44x_need_flush@ha
-	lwz	r5,icache_44x_need_flush@l(r4)
-	cmplwi	cr0,r5,0
-	bne-	2f
-1:
-#endif /* CONFIG_44x */
-BEGIN_FTR_SECTION
-	lwarx	r7,0,r1
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
-	stwcx.	r0,0,r1			/* to clear the reservation */
-	lwz	r4,_LINK(r1)
-	lwz	r5,_CCR(r1)
-	mtlr	r4
-	mtcr	r5
-	lwz	r7,_NIP(r1)
-	lwz	r8,_MSR(r1)
-	FIX_SRR1(r8, r0)
-	lwz	r2,GPR2(r1)
-	lwz	r1,GPR1(r1)
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r8
-	SYNC
-	RFI
-#ifdef CONFIG_44x
-2:	li	r7,0
-	iccci	r0,r0
-	stw	r7,icache_44x_need_flush@l(r4)
-	b	1b
-#endif  /* CONFIG_44x */
-
-66:	li	r3,-ENOSYS
-	b	ret_from_syscall
-
-	.globl	ret_from_fork
-ret_from_fork:
-	REST_NVGPRS(r1)
-	bl	schedule_tail
-	li	r3,0
-	b	ret_from_syscall
-
-/* Traced system call support */
-syscall_dotrace:
-	SAVE_NVGPRS(r1)
-	li	r0,0xc00
-	stw	r0,TRAP(r1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_enter
-	lwz	r0,GPR0(r1)	/* Restore original registers */
-	lwz	r3,GPR3(r1)
-	lwz	r4,GPR4(r1)
-	lwz	r5,GPR5(r1)
-	lwz	r6,GPR6(r1)
-	lwz	r7,GPR7(r1)
-	lwz	r8,GPR8(r1)
-	REST_NVGPRS(r1)
-	b	syscall_dotrace_cont
-
-syscall_exit_work:
-	andi.	r0,r9,_TIF_RESTOREALL
-	beq+	0f
-	REST_NVGPRS(r1)
-	b	2f
-0:	cmplw	0,r3,r8
-	blt+	1f
-	andi.	r0,r9,_TIF_NOERROR
-	bne-	1f
-	lwz	r11,_CCR(r1)			/* Load CR */
-	neg	r3,r3
-	oris	r11,r11,0x1000	/* Set SO bit in CR */
-	stw	r11,_CCR(r1)
-
-1:	stw	r6,RESULT(r1)	/* Save result */
-	stw	r3,GPR3(r1)	/* Update return value */
-2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
-	beq	4f
-
-	/* Clear per-syscall TIF flags if any are set.  */
-
-	li	r11,_TIF_PERSYSCALL_MASK
-	addi	r12,r12,TI_FLAGS
-3:	lwarx	r8,0,r12
-	andc	r8,r8,r11
-#ifdef CONFIG_IBM405_ERR77
-	dcbt	0,r12
-#endif
-	stwcx.	r8,0,r12
-	bne-	3b
-	subi	r12,r12,TI_FLAGS
-	
-4:	/* Anything which requires enabling interrupts? */
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
-	beq	ret_from_except
-
-	/* Re-enable interrupts */
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)
-
-	/* Save NVGPRS if they're not saved already */
-	lwz	r4,TRAP(r1)
-	andi.	r4,r4,1
-	beq	5f
-	SAVE_NVGPRS(r1)
-	li	r4,0xc00
-	stw	r4,TRAP(r1)
-5:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_leave
-	b	ret_from_except_full
-
-#ifdef SHOW_SYSCALLS
-do_show_syscall:
-#ifdef SHOW_SYSCALLS_TASK
-	lis	r11,show_syscalls_task@ha
-	lwz	r11,show_syscalls_task@l(r11)
-	cmp	0,r2,r11
-	bnelr
-#endif
-	stw	r31,GPR31(r1)
-	mflr	r31
-	lis	r3,7f@ha
-	addi	r3,r3,7f@l
-	lwz	r4,GPR0(r1)
-	lwz	r5,GPR3(r1)
-	lwz	r6,GPR4(r1)
-	lwz	r7,GPR5(r1)
-	lwz	r8,GPR6(r1)
-	lwz	r9,GPR7(r1)
-	bl	printk
-	lis	r3,77f@ha
-	addi	r3,r3,77f@l
-	lwz	r4,GPR8(r1)
-	mr	r5,r2
-	bl	printk
-	lwz	r0,GPR0(r1)
-	lwz	r3,GPR3(r1)
-	lwz	r4,GPR4(r1)
-	lwz	r5,GPR5(r1)
-	lwz	r6,GPR6(r1)
-	lwz	r7,GPR7(r1)
-	lwz	r8,GPR8(r1)
-	mtlr	r31
-	lwz	r31,GPR31(r1)
-	blr
-
-do_show_syscall_exit:
-#ifdef SHOW_SYSCALLS_TASK
-	lis	r11,show_syscalls_task@ha
-	lwz	r11,show_syscalls_task@l(r11)
-	cmp	0,r2,r11
-	bnelr
-#endif
-	stw	r31,GPR31(r1)
-	mflr	r31
-	stw	r3,RESULT(r1)	/* Save result */
-	mr	r4,r3
-	lis	r3,79f@ha
-	addi	r3,r3,79f@l
-	bl	printk
-	lwz	r3,RESULT(r1)
-	mtlr	r31
-	lwz	r31,GPR31(r1)
-	blr
-
-7:	.string	"syscall %d(%x, %x, %x, %x, %x, "
-77:	.string	"%x), current=%p\n"
-79:	.string	" -> %x\n"
-	.align	2,0
-
-#ifdef SHOW_SYSCALLS_TASK
-	.data
-	.globl	show_syscalls_task
-show_syscalls_task:
-	.long	-1
-	.text
-#endif
-#endif /* SHOW_SYSCALLS */
-
-/*
- * The fork/clone functions need to copy the full register set into
- * the child process. Therefore we need to save all the nonvolatile
- * registers (r13 - r31) before calling the C code.
- */
-	.globl	ppc_fork
-ppc_fork:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_fork
-
-	.globl	ppc_vfork
-ppc_vfork:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_vfork
-
-	.globl	ppc_clone
-ppc_clone:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_clone
-
-	.globl	ppc_swapcontext
-ppc_swapcontext:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_swapcontext
-
-/*
- * Top-level page fault handling.
- * This is in assembler because if do_page_fault tells us that
- * it is a bad kernel page fault, we want to save the non-volatile
- * registers before calling bad_page_fault.
- */
-	.globl	handle_page_fault
-handle_page_fault:
-	stw	r4,_DAR(r1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_page_fault
-	cmpwi	r3,0
-	beq+	ret_from_except
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	clrrwi	r0,r0,1
-	stw	r0,TRAP(r1)
-	mr	r5,r3
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lwz	r4,_DAR(r1)
-	bl	bad_page_fault
-	b	ret_from_except_full
-
-/*
- * This routine switches between two different tasks.  The process
- * state of one is saved on its kernel stack.  Then the state
- * of the other is restored from its kernel stack.  The memory
- * management hardware is updated to the second process's state.
- * Finally, we can return to the second process.
- * On entry, r3 points to the THREAD for the current task, r4
- * points to the THREAD for the new task.
- *
- * This routine is always called with interrupts disabled.
- *
- * Note: there are two ways to get to the "going out" portion
- * of this code; either by coming in via the entry (_switch)
- * or via "fork" which must set up an environment equivalent
- * to the "_switch" path.  If you change this , you'll have to
- * change the fork code also.
- *
- * The code which creates the new task context is in 'copy_thread'
- * in arch/ppc/kernel/process.c
- */
-_GLOBAL(_switch)
-	stwu	r1,-INT_FRAME_SIZE(r1)
-	mflr	r0
-	stw	r0,INT_FRAME_SIZE+4(r1)
-	/* r3-r12 are caller saved -- Cort */
-	SAVE_NVGPRS(r1)
-	stw	r0,_NIP(r1)	/* Return to switch caller */
-	mfmsr	r11
-	li	r0,MSR_FP	/* Disable floating-point */
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	oris	r0,r0,MSR_VEC@h	/* Disable altivec */
-	mfspr	r12,SPRN_VRSAVE	/* save vrsave register value */
-	stw	r12,THREAD+THREAD_VRSAVE(r2)
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-	and.	r0,r0,r11	/* FP or altivec enabled? */
-	beq+	1f
-	andc	r11,r11,r0
-	MTMSRD(r11)
-	isync
-1:	stw	r11,_MSR(r1)
-	mfcr	r10
-	stw	r10,_CCR(r1)
-	stw	r1,KSP(r3)	/* Set old stack pointer */
-
-#ifdef CONFIG_SMP
-	/* We need a sync somewhere here to make sure that if the
-	 * previous task gets rescheduled on another CPU, it sees all
-	 * stores it has performed on this one.
-	 */
-	sync
-#endif /* CONFIG_SMP */
-
-	tophys(r0,r4)
-	CLR_TOP32(r0)
-	mtspr	SPRN_SPRG3,r0	/* Update current THREAD phys addr */
-	lwz	r1,KSP(r4)	/* Load new stack pointer */
-
-	/* save the old current 'last' for return value */
-	mr	r3,r2
-	addi	r2,r4,-THREAD	/* Update current */
-
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	lwz	r0,THREAD+THREAD_VRSAVE(r2)
-	mtspr	SPRN_VRSAVE,r0		/* if G4, restore VRSAVE reg */
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-	lwz	r0,_CCR(r1)
-	mtcrf	0xFF,r0
-	/* r3-r12 are destroyed -- Cort */
-	REST_NVGPRS(r1)
-
-	lwz	r4,_NIP(r1)	/* Return to _switch caller in new task */
-	mtlr	r4
-	addi	r1,r1,INT_FRAME_SIZE
-	blr
-
-	.globl	fast_exception_return
-fast_exception_return:
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	andi.	r10,r9,MSR_RI		/* check for recoverable interrupt */
-	beq	1f			/* if not, we've got problems */
-#endif
-
-2:	REST_4GPRS(3, r11)
-	lwz	r10,_CCR(r11)
-	REST_GPR(1, r11)
-	mtcr	r10
-	lwz	r10,_LINK(r11)
-	mtlr	r10
-	REST_GPR(10, r11)
-	mtspr	SPRN_SRR1,r9
-	mtspr	SPRN_SRR0,r12
-	REST_GPR(9, r11)
-	REST_GPR(12, r11)
-	lwz	r11,GPR11(r11)
-	SYNC
-	RFI
-
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-/* check if the exception happened in a restartable section */
-1:	lis	r3,exc_exit_restart_end@ha
-	addi	r3,r3,exc_exit_restart_end@l
-	cmplw	r12,r3
-	bge	3f
-	lis	r4,exc_exit_restart@ha
-	addi	r4,r4,exc_exit_restart@l
-	cmplw	r12,r4
-	blt	3f
-	lis	r3,fee_restarts@ha
-	tophys(r3,r3)
-	lwz	r5,fee_restarts@l(r3)
-	addi	r5,r5,1
-	stw	r5,fee_restarts@l(r3)
-	mr	r12,r4		/* restart at exc_exit_restart */
-	b	2b
-
-	.section .bss
-	.align	2
-fee_restarts:
-	.space	4
-	.previous
-
-/* aargh, a nonrecoverable interrupt, panic */
-/* aargh, we don't know which trap this is */
-/* but the 601 doesn't implement the RI bit, so assume it's OK */
-3:
-BEGIN_FTR_SECTION
-	b	2b
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-	li	r10,-1
-	stw	r10,TRAP(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lis	r10,MSR_KERNEL@h
-	ori	r10,r10,MSR_KERNEL@l
-	bl	transfer_to_handler_full
-	.long	nonrecoverable_exception
-	.long	ret_from_except
-#endif
-
-	.globl	ret_from_except_full
-ret_from_except_full:
-	REST_NVGPRS(r1)
-	/* fall through */
-
-	.globl	ret_from_except
-ret_from_except:
-	/* Hard-disable interrupts so that current_thread_info()->flags
-	 * can't change between when we test it and when we return
-	 * from the interrupt. */
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	SYNC			/* Some chip revs have problems here... */
-	MTMSRD(r10)		/* disable interrupts */
-
-	lwz	r3,_MSR(r1)	/* Returning to user mode? */
-	andi.	r0,r3,MSR_PR
-	beq	resume_kernel
-
-user_exc_return:		/* r10 contains MSR_KERNEL here */
-	/* Check current_thread_info()->flags */
-	rlwinm	r9,r1,0,0,18
-	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
-	bne	do_work
-
-restore_user:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* Check whether this process has its own DBCR0 value.  The single
-	   step bit tells us that dbcr0 should be loaded. */
-	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
-	bnel-	load_dbcr0
-#endif
-
-#ifdef CONFIG_PREEMPT
-	b	restore
-
-/* N.B. the only way to get here is from the beq following ret_from_except. */
-resume_kernel:
-	/* check current_thread_info->preempt_count */
-	rlwinm	r9,r1,0,0,18
-	lwz	r0,TI_PREEMPT(r9)
-	cmpwi	0,r0,0		/* if non-zero, just restore regs and return */
-	bne	restore
-	lwz	r0,TI_FLAGS(r9)
-	andi.	r0,r0,_TIF_NEED_RESCHED
-	beq+	restore
-	andi.	r0,r3,MSR_EE	/* interrupts off? */
-	beq	restore		/* don't schedule if so */
-1:	bl	preempt_schedule_irq
-	rlwinm	r9,r1,0,0,18
-	lwz	r3,TI_FLAGS(r9)
-	andi.	r0,r3,_TIF_NEED_RESCHED
-	bne-	1b
-#else
-resume_kernel:
-#endif /* CONFIG_PREEMPT */
-
-	/* interrupts are hard-disabled at this point */
-restore:
-#ifdef CONFIG_44x
-	lis	r4,icache_44x_need_flush@ha
-	lwz	r5,icache_44x_need_flush@l(r4)
-	cmplwi	cr0,r5,0
-	beq+	1f
-	li	r6,0
-	iccci	r0,r0
-	stw	r6,icache_44x_need_flush@l(r4)
-1:
-#endif  /* CONFIG_44x */
-	lwz	r0,GPR0(r1)
-	lwz	r2,GPR2(r1)
-	REST_4GPRS(3, r1)
-	REST_2GPRS(7, r1)
-
-	lwz	r10,_XER(r1)
-	lwz	r11,_CTR(r1)
-	mtspr	SPRN_XER,r10
-	mtctr	r11
-
-	PPC405_ERR77(0,r1)
-BEGIN_FTR_SECTION
-	lwarx	r11,0,r1
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
-	stwcx.	r0,0,r1			/* to clear the reservation */
-
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	lwz	r9,_MSR(r1)
-	andi.	r10,r9,MSR_RI		/* check if this exception occurred */
-	beql	nonrecoverable		/* at a bad place (MSR:RI = 0) */
-
-	lwz	r10,_CCR(r1)
-	lwz	r11,_LINK(r1)
-	mtcrf	0xFF,r10
-	mtlr	r11
-
-	/*
-	 * Once we put values in SRR0 and SRR1, we are in a state
-	 * where exceptions are not recoverable, since taking an
-	 * exception will trash SRR0 and SRR1.  Therefore we clear the
-	 * MSR:RI bit to indicate this.  If we do take an exception,
-	 * we can't return to the point of the exception but we
-	 * can restart the exception exit path at the label
-	 * exc_exit_restart below.  -- paulus
-	 */
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL & ~MSR_RI)
-	SYNC
-	MTMSRD(r10)		/* clear the RI bit */
-	.globl exc_exit_restart
-exc_exit_restart:
-	lwz	r9,_MSR(r1)
-	lwz	r12,_NIP(r1)
-	FIX_SRR1(r9,r10)
-	mtspr	SPRN_SRR0,r12
-	mtspr	SPRN_SRR1,r9
-	REST_4GPRS(9, r1)
-	lwz	r1,GPR1(r1)
-	.globl exc_exit_restart_end
-exc_exit_restart_end:
-	SYNC
-	RFI
-
-#else /* !(CONFIG_4xx || CONFIG_BOOKE) */
-	/*
-	 * This is a bit different on 4xx/Book-E because it doesn't have
-	 * the RI bit in the MSR.
-	 * The TLB miss handler checks if we have interrupted
-	 * the exception exit path and restarts it if so
-	 * (well maybe one day it will... :).
-	 */
-	lwz	r11,_LINK(r1)
-	mtlr	r11
-	lwz	r10,_CCR(r1)
-	mtcrf	0xff,r10
-	REST_2GPRS(9, r1)
-	.globl exc_exit_restart
-exc_exit_restart:
-	lwz	r11,_NIP(r1)
-	lwz	r12,_MSR(r1)
-exc_exit_start:
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r12
-	REST_2GPRS(11, r1)
-	lwz	r1,GPR1(r1)
-	.globl exc_exit_restart_end
-exc_exit_restart_end:
-	PPC405_ERR77_SYNC
-	rfi
-	b	.			/* prevent prefetch past rfi */
-
-/*
- * Returning from a critical interrupt in user mode doesn't need
- * to be any different from a normal exception.  For a critical
- * interrupt in the kernel, we just return (without checking for
- * preemption) since the interrupt may have happened at some crucial
- * place (e.g. inside the TLB miss handler), and because we will be
- * running with r1 pointing into critical_stack, not the current
- * process's kernel stack (and therefore current_thread_info() will
- * give the wrong answer).
- * We have to restore various SPRs that may have been in use at the
- * time of the critical interrupt.
- *
- */
-#ifdef CONFIG_40x
-#define PPC_40x_TURN_OFF_MSR_DR						    \
-	/* avoid any possible TLB misses here by turning off MSR.DR, we	    \
-	 * assume the instructions here are mapped by a pinned TLB entry */ \
-	li	r10,MSR_IR;						    \
-	mtmsr	r10;							    \
-	isync;								    \
-	tophys(r1, r1);
-#else
-#define PPC_40x_TURN_OFF_MSR_DR
-#endif
-
-#define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi)	\
-	REST_NVGPRS(r1);						\
-	lwz	r3,_MSR(r1);						\
-	andi.	r3,r3,MSR_PR;						\
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL);				\
-	bne	user_exc_return;					\
-	lwz	r0,GPR0(r1);						\
-	lwz	r2,GPR2(r1);						\
-	REST_4GPRS(3, r1);						\
-	REST_2GPRS(7, r1);						\
-	lwz	r10,_XER(r1);						\
-	lwz	r11,_CTR(r1);						\
-	mtspr	SPRN_XER,r10;						\
-	mtctr	r11;							\
-	PPC405_ERR77(0,r1);						\
-	stwcx.	r0,0,r1;		/* to clear the reservation */	\
-	lwz	r11,_LINK(r1);						\
-	mtlr	r11;							\
-	lwz	r10,_CCR(r1);						\
-	mtcrf	0xff,r10;						\
-	PPC_40x_TURN_OFF_MSR_DR;					\
-	lwz	r9,_DEAR(r1);						\
-	lwz	r10,_ESR(r1);						\
-	mtspr	SPRN_DEAR,r9;						\
-	mtspr	SPRN_ESR,r10;						\
-	lwz	r11,_NIP(r1);						\
-	lwz	r12,_MSR(r1);						\
-	mtspr	exc_lvl_srr0,r11;					\
-	mtspr	exc_lvl_srr1,r12;					\
-	lwz	r9,GPR9(r1);						\
-	lwz	r12,GPR12(r1);						\
-	lwz	r10,GPR10(r1);						\
-	lwz	r11,GPR11(r1);						\
-	lwz	r1,GPR1(r1);						\
-	PPC405_ERR77_SYNC;						\
-	exc_lvl_rfi;							\
-	b	.;		/* prevent prefetch past exc_lvl_rfi */
-
-	.globl	ret_from_crit_exc
-ret_from_crit_exc:
-	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
-
-#ifdef CONFIG_BOOKE
-	.globl	ret_from_debug_exc
-ret_from_debug_exc:
-	RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI)
-
-	.globl	ret_from_mcheck_exc
-ret_from_mcheck_exc:
-	RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI)
-#endif /* CONFIG_BOOKE */
-
-/*
- * Load the DBCR0 value for a task that is being ptraced,
- * having first saved away the global DBCR0.  Note that r0
- * has the dbcr0 value to set upon entry to this.
- */
-load_dbcr0:
-	mfmsr	r10		/* first disable debug exceptions */
-	rlwinm	r10,r10,0,~MSR_DE
-	mtmsr	r10
-	isync
-	mfspr	r10,SPRN_DBCR0
-	lis	r11,global_dbcr0@ha
-	addi	r11,r11,global_dbcr0@l
-	stw	r10,0(r11)
-	mtspr	SPRN_DBCR0,r0
-	lwz	r10,4(r11)
-	addi	r10,r10,1
-	stw	r10,4(r11)
-	li	r11,-1
-	mtspr	SPRN_DBSR,r11	/* clear all pending debug events */
-	blr
-
-	.section .bss
-	.align	4
-global_dbcr0:
-	.space	8
-	.previous
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
-
-do_work:			/* r10 contains MSR_KERNEL here */
-	andi.	r0,r9,_TIF_NEED_RESCHED
-	beq	do_user_signal
-
-do_resched:			/* r10 contains MSR_KERNEL here */
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)		/* hard-enable interrupts */
-	bl	schedule
-recheck:
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	SYNC
-	MTMSRD(r10)		/* disable interrupts */
-	rlwinm	r9,r1,0,0,18
-	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,_TIF_NEED_RESCHED
-	bne-	do_resched
-	andi.	r0,r9,_TIF_SIGPENDING
-	beq	restore_user
-do_user_signal:			/* r10 contains MSR_KERNEL here */
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)		/* hard-enable interrupts */
-	/* save r13-r31 in the exception frame, if not already done */
-	lwz	r3,TRAP(r1)
-	andi.	r0,r3,1
-	beq	2f
-	SAVE_NVGPRS(r1)
-	rlwinm	r3,r3,0,0,30
-	stw	r3,TRAP(r1)
-2:	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
-	bl	do_signal
-	REST_NVGPRS(r1)
-	b	recheck
-
-/*
- * We come here when we are at the end of handling an exception
- * that occurred at a place where taking an exception will lose
- * state information, such as the contents of SRR0 and SRR1.
- */
-nonrecoverable:
-	lis	r10,exc_exit_restart_end@ha
-	addi	r10,r10,exc_exit_restart_end@l
-	cmplw	r12,r10
-	bge	3f
-	lis	r11,exc_exit_restart@ha
-	addi	r11,r11,exc_exit_restart@l
-	cmplw	r12,r11
-	blt	3f
-	lis	r10,ee_restarts@ha
-	lwz	r12,ee_restarts@l(r10)
-	addi	r12,r12,1
-	stw	r12,ee_restarts@l(r10)
-	mr	r12,r11		/* restart at exc_exit_restart */
-	blr
-3:	/* OK, we can't recover, kill this process */
-	/* but the 601 doesn't implement the RI bit, so assume it's OK */
-BEGIN_FTR_SECTION
-	blr
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-	lwz	r3,TRAP(r1)
-	andi.	r0,r3,1
-	beq	4f
-	SAVE_NVGPRS(r1)
-	rlwinm	r3,r3,0,0,30
-	stw	r3,TRAP(r1)
-4:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	nonrecoverable_exception
-	/* shouldn't return */
-	b	4b
-
-	.section .bss
-	.align	2
-ee_restarts:
-	.space	4
-	.previous
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
deleted file mode 100644
index e7e642b95138..000000000000
--- a/arch/ppc/kernel/head.S
+++ /dev/null
@@ -1,1220 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  This file contains the low-level support and setup for the
- *  PowerPC platform, including trap and interrupt dispatch.
- *  (The PPC 8xx embedded CPUs use head_8xx.S instead.)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/cache.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
-#define LOAD_BAT(n, reg, RA, RB)	\
-	/* see the comment for clear_bats() -- Cort */ \
-	li	RA,0;			\
-	mtspr	SPRN_IBAT##n##U,RA;	\
-	mtspr	SPRN_DBAT##n##U,RA;	\
-	lwz	RA,(n*16)+0(reg);	\
-	lwz	RB,(n*16)+4(reg);	\
-	mtspr	SPRN_IBAT##n##U,RA;	\
-	mtspr	SPRN_IBAT##n##L,RB;	\
-	beq	1f;			\
-	lwz	RA,(n*16)+8(reg);	\
-	lwz	RB,(n*16)+12(reg);	\
-	mtspr	SPRN_DBAT##n##U,RA;	\
-	mtspr	SPRN_DBAT##n##L,RB;	\
-1:
-
-	.text
-	.stabs	"arch/ppc/kernel/",N_SO,0,0,0f
-	.stabs	"head.S",N_SO,0,0,0f
-0:
-	.globl	_stext
-_stext:
-
-/*
- * _start is defined this way because the XCOFF loader in the OpenFirmware
- * on the powermac expects the entry point to be a procedure descriptor.
- */
-	.text
-	.globl	_start
-_start:
-	/*
-	 * These are here for legacy reasons, the kernel used to
-	 * need to look like a coff function entry for the pmac
-	 * but we're always started by some kind of bootloader now.
-	 *  -- Cort
-	 */
-	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
-	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
-	nop
-
-/* PMAC
- * Enter here with the kernel text, data and bss loaded starting at
- * 0, running with virtual == physical mapping.
- * r5 points to the prom entry point (the client interface handler
- * address).  Address translation is turned on, with the prom
- * managing the hash table.  Interrupts are disabled.  The stack
- * pointer (r1) points to just below the end of the half-meg region
- * from 0x380000 - 0x400000, which is mapped in already.
- *
- * If we are booted from MacOS via BootX, we enter with the kernel
- * image loaded somewhere, and the following values in registers:
- *  r3: 'BooX' (0x426f6f58)
- *  r4: virtual address of boot_infos_t
- *  r5: 0
- *
- * APUS
- *   r3: 'APUS'
- *   r4: physical address of memory base
- *   Linux/m68k style BootInfo structure at &_end.
- *
- * PREP
- * This is jumped to on prep systems right after the kernel is relocated
- * to its proper place in memory by the boot loader.  The expected layout
- * of the regs is:
- *   r3: ptr to residual data
- *   r4: initrd_start or if no initrd then 0
- *   r5: initrd_end - unused if r4 is 0
- *   r6: Start of command line string
- *   r7: End of command line string
- *
- * This just gets a minimal mmu environment setup so we can call
- * start_here() to do the real work.
- * -- Cort
- */
-
-	.globl	__start
-__start:
-	mr	r31,r3			/* save parameters */
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-	li	r24,0			/* cpu # */
-
-/*
- * early_init() does the early machine identification and does
- * the necessary low-level setup and clears the BSS
- *  -- Cort <cort@fsmlabs.com>
- */
-	bl	early_init
-
-/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
- * the physical address we are running at, returned by early_init()
- */
- 	bl	mmu_off
-__after_mmu_off:
-	bl	clear_bats
-	bl	flush_tlbs
-
-	bl	initial_bats
-#ifdef CONFIG_BOOTX_TEXT
-	bl	setup_disp_bat
-#endif
-
-/*
- * Call setup_cpu for CPU 0 and initialize 6xx Idle
- */
-	bl	reloc_offset
-	li	r24,0			/* cpu# */
-	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
-#ifdef CONFIG_6xx
-	bl	reloc_offset
-	bl	init_idle_6xx
-#endif /* CONFIG_6xx */
-
-
-/*
- * We need to run with _start at physical address 0.
- * If the MMU is already turned on, we copy stuff to KERNELBASE,
- * otherwise we copy it to 0.
- */
-	bl	reloc_offset
-	mr	r26,r3
-	addis	r4,r3,KERNELBASE@h	/* current address of _start */
-	cmpwi	0,r4,0			/* are we already running at 0? */
-	bne	relocate_kernel
-
-/*
- * we now have the 1st 16M of ram mapped with the bats.
- * prep needs the mmu to be turned on here, but pmac already has it on.
- * this shouldn't bother the pmac since it just gets turned on again
- * as we jump to our code at KERNELBASE. -- Cort
- * Actually no, pmac doesn't have it on any more. BootX enters with MMU
- * off, and in other cases, we now turn it off before changing BATs above.
- */
-turn_on_mmu:
-	mfmsr	r0
-	ori	r0,r0,MSR_DR|MSR_IR
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	RFI				/* enables MMU */
-
-/*
- * We need __secondary_hold as a place to hold the other cpus on
- * an SMP machine, even when we are running a UP kernel.
- */
-	. = 0xc0			/* for prep bootloader */
-	li	r3,1			/* MTX only has 1 cpu */
-	.globl	__secondary_hold
-__secondary_hold:
-	/* tell the master we're here */
-	stw	r3,4(0)
-#ifdef CONFIG_SMP
-100:	lwz	r4,0(0)
-	/* wait until we're told to start */
-	cmpw	0,r4,r3
-	bne	100b
-	/* our cpu # was at addr 0 - go */
-	mr	r24,r3			/* cpu # */
-	b	__secondary_start
-#else
-	b	.
-#endif /* CONFIG_SMP */
-
-/*
- * Exception entry code.  This code runs with address translation
- * turned off, i.e. using physical addresses.
- * We assume sprg3 has the physical address of the current
- * task's thread_struct.
- */
-#define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
-	mfcr	r10;		\
-	EXCEPTION_PROLOG_1;	\
-	EXCEPTION_PROLOG_2
-
-#define EXCEPTION_PROLOG_1	\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
-	andi.	r11,r11,MSR_PR;	\
-	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
-	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
-	lwz	r11,THREAD_INFO-THREAD(r11);	\
-	addi	r11,r11,THREAD_SIZE;	\
-	tophys(r11,r11);	\
-1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
-
-
-#define EXCEPTION_PROLOG_2	\
-	CLR_TOP32(r11);		\
-	stw	r10,_CCR(r11);		/* save registers */ \
-	stw	r12,GPR12(r11);	\
-	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
-	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
-	stw	r12,GPR11(r11);	\
-	mflr	r10;		\
-	stw	r10,_LINK(r11);	\
-	mfspr	r12,SPRN_SRR0;	\
-	mfspr	r9,SPRN_SRR1;	\
-	stw	r1,GPR1(r11);	\
-	stw	r1,0(r11);	\
-	tovirt(r1,r11);			/* set new kernel sp */	\
-	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
-	MTMSRD(r10);			/* (except for mach check in rtas) */ \
-	stw	r0,GPR0(r11);	\
-	SAVE_4GPRS(3, r11);	\
-	SAVE_2GPRS(7, r11)
-
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r11, r12 (SRR0), and r9 (SRR1).
- *
- * Note2: once we have set r1 we are in a position to take exceptions
- * again, and we could thus set MSR:RI at that point.
- */
-
-/*
- * Exception vectors.
- */
-#define EXCEPTION(n, label, hdlr, xfer)		\
-	. = n;					\
-label:						\
-	EXCEPTION_PROLOG;			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
-	xfer(n, hdlr)
-
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	li	r10,MSR_KERNEL;					\
-	copyee(r10, r9);					\
-	bl	tfer;						\
-i##n:								\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-/* System reset */
-/* core99 pmac starts the seconary here by changing the vector, and
-   putting it back to what it was (unknown_exception) when done.  */
-	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
-
-/* Machine check */
-	. = 0x200
-	mtspr	SPRN_SPRG0,r10
-	mtspr	SPRN_SPRG1,r11
-	mfcr	r10
-	EXCEPTION_PROLOG_1
-7:	EXCEPTION_PROLOG_2
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x200, machine_check_exception)
-
-/* Data access exception. */
-	. = 0x300
-DataAccess:
-	EXCEPTION_PROLOG
-	mfspr	r10,SPRN_DSISR
-	andis.	r0,r10,0xa470		/* weird error? */
-	bne	1f			/* if not, try to put a PTE */
-	mfspr	r4,SPRN_DAR		/* into the hash table */
-	rlwinm	r3,r10,32-15,21,21	/* DSISR_STORE -> _PAGE_RW */
-	bl	hash_page
-1:	stw	r10,_DSISR(r11)
-	mr	r5,r10
-	mfspr	r4,SPRN_DAR
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Instruction access exception. */
-	. = 0x400
-InstructionAccess:
-	EXCEPTION_PROLOG
-	andis.	r0,r9,0x4000		/* no pte found? */
-	beq	1f			/* if so, try to put a PTE */
-	li	r3,0			/* into the hash table */
-	mr	r4,r12			/* SRR0 is fault address */
-	bl	hash_page
-1:	mr	r4,r12
-	mr	r5,r9
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* External interrupt */
-	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* Alignment exception */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DAR
-	stw	r4,_DAR(r11)
-	mfspr	r5,SPRN_DSISR
-	stw	r5,_DSISR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* Program check exception */
-	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
-
-/* Floating-point unavailable */
-	. = 0x800
-FPUnavailable:
-	EXCEPTION_PROLOG
-	bne	load_up_fpu		/* if from user, just load it up */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
-
-/* Decrementer */
-	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
-
-	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
-
-/* System call */
-	. = 0xc00
-SystemCall:
-	EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-/* Single step - not used on 601 */
-	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
-
-/*
- * The Altivec unavailable trap is at 0x0f20.  Foo.
- * We effectively remap it to 0x3000.
- * We include an altivec unavailable exception vector even if
- * not configured for Altivec, so that you can't panic a
- * non-altivec kernel running on a machine with altivec just
- * by executing an altivec instruction.
- */
-	. = 0xf00
-	b	Trap_0f
-
-	. = 0xf20
-	b	AltiVecUnavailable
-
-Trap_0f:
-	EXCEPTION_PROLOG
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0xf00, unknown_exception)
-
-/*
- * Handle TLB miss for instruction on 603/603e.
- * Note: we get an alternate set of r0 - r3 to use automatically.
- */
-	. = 0x1000
-InstructionTLBMiss:
-/*
- * r0:	stored ctr
- * r1:	linux style pte ( later becomes ppc hardware pte )
- * r2:	ptr to linux-style pte
- * r3:	scratch
- */
-	mfctr	r0
-	/* Get PTE (linux-style) and check access */
-	mfspr	r3,SPRN_IMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
-	mfspr	r2,SPRN_SPRG3
-	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
-	lwz	r2,PGDIR(r2)
-	blt+	112f
-	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
-	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
-	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
-112:	tophys(r2,r2)
-	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
-	lwz	r2,0(r2)		/* get pmd entry */
-	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
-	beq-	InstructionAddressInvalid	/* return if no mapping */
-	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
-	lwz	r3,0(r2)		/* get linux-style pte */
-	andc.	r1,r1,r3		/* check access & ~permission */
-	bne-	InstructionAddressInvalid /* return if access not permitted */
-	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
-	/*
-	 * NOTE! We are assuming this is not an SMP system, otherwise
-	 * we would need to update the pte atomically with lwarx/stwcx.
-	 */
-	stw	r3,0(r2)		/* update PTE (accessed bit) */
-	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r1,r1,r2		/* writable if _RW and _DIRTY */
-	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r1,r1,0xe14		/* clear out reserved bits and M */
-	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
-	mtspr	SPRN_RPA,r1
-	mfspr	r3,SPRN_IMISS
-	tlbli	r3
-	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
-	mtcrf	0x80,r3
-	rfi
-InstructionAddressInvalid:
-	mfspr	r3,SPRN_SRR1
-	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
-
-	addis	r1,r1,0x2000
-	mtspr	SPRN_DSISR,r1	/* (shouldn't be needed) */
-	mtctr	r0		/* Restore CTR */
-	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
-	or	r2,r2,r1
-	mtspr	SPRN_SRR1,r2
-	mfspr	r1,SPRN_IMISS	/* Get failing address */
-	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
-	rlwimi	r2,r2,1,30,30	/* change 1 -> 3 */
-	xor	r1,r1,r2
-	mtspr	SPRN_DAR,r1	/* Set fault address */
-	mfmsr	r0		/* Restore "normal" registers */
-	xoris	r0,r0,MSR_TGPR>>16
-	mtcrf	0x80,r3		/* Restore CR0 */
-	mtmsr	r0
-	b	InstructionAccess
-
-/*
- * Handle TLB miss for DATA Load operation on 603/603e
- */
-	. = 0x1100
-DataLoadTLBMiss:
-/*
- * r0:	stored ctr
- * r1:	linux style pte ( later becomes ppc hardware pte )
- * r2:	ptr to linux-style pte
- * r3:	scratch
- */
-	mfctr	r0
-	/* Get PTE (linux-style) and check access */
-	mfspr	r3,SPRN_DMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
-	mfspr	r2,SPRN_SPRG3
-	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
-	lwz	r2,PGDIR(r2)
-	blt+	112f
-	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
-	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
-	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
-112:	tophys(r2,r2)
-	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
-	lwz	r2,0(r2)		/* get pmd entry */
-	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
-	beq-	DataAddressInvalid	/* return if no mapping */
-	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
-	lwz	r3,0(r2)		/* get linux-style pte */
-	andc.	r1,r1,r3		/* check access & ~permission */
-	bne-	DataAddressInvalid	/* return if access not permitted */
-	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
-	/*
-	 * NOTE! We are assuming this is not an SMP system, otherwise
-	 * we would need to update the pte atomically with lwarx/stwcx.
-	 */
-	stw	r3,0(r2)		/* update PTE (accessed bit) */
-	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r1,r1,r2		/* writable if _RW and _DIRTY */
-	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r1,r1,0xe14		/* clear out reserved bits and M */
-	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
-	mtspr	SPRN_RPA,r1
-	mfspr	r3,SPRN_DMISS
-	tlbld	r3
-	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
-	mtcrf	0x80,r3
-	rfi
-DataAddressInvalid:
-	mfspr	r3,SPRN_SRR1
-	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
-	addis	r1,r1,0x2000
-	mtspr	SPRN_DSISR,r1
-	mtctr	r0		/* Restore CTR */
-	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
-	mtspr	SPRN_SRR1,r2
-	mfspr	r1,SPRN_DMISS	/* Get failing address */
-	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
-	beq	20f		/* Jump if big endian */
-	xori	r1,r1,3
-20:	mtspr	SPRN_DAR,r1	/* Set fault address */
-	mfmsr	r0		/* Restore "normal" registers */
-	xoris	r0,r0,MSR_TGPR>>16
-	mtcrf	0x80,r3		/* Restore CR0 */
-	mtmsr	r0
-	b	DataAccess
-
-/*
- * Handle TLB miss for DATA Store on 603/603e
- */
-	. = 0x1200
-DataStoreTLBMiss:
-/*
- * r0:	stored ctr
- * r1:	linux style pte ( later becomes ppc hardware pte )
- * r2:	ptr to linux-style pte
- * r3:	scratch
- */
-	mfctr	r0
-	/* Get PTE (linux-style) and check access */
-	mfspr	r3,SPRN_DMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
-	mfspr	r2,SPRN_SPRG3
-	li	r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
-	lwz	r2,PGDIR(r2)
-	blt+	112f
-	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
-	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
-	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
-112:	tophys(r2,r2)
-	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
-	lwz	r2,0(r2)		/* get pmd entry */
-	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
-	beq-	DataAddressInvalid	/* return if no mapping */
-	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
-	lwz	r3,0(r2)		/* get linux-style pte */
-	andc.	r1,r1,r3		/* check access & ~permission */
-	bne-	DataAddressInvalid	/* return if access not permitted */
-	ori	r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY
-	/*
-	 * NOTE! We are assuming this is not an SMP system, otherwise
-	 * we would need to update the pte atomically with lwarx/stwcx.
-	 */
-	stw	r3,0(r2)		/* update PTE (accessed/dirty bits) */
-	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	li	r1,0xe15		/* clear out reserved bits and M */
-	andc	r1,r3,r1		/* PP = user? 2: 0 */
-	mtspr	SPRN_RPA,r1
-	mfspr	r3,SPRN_DMISS
-	tlbld	r3
-	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
-	mtcrf	0x80,r3
-	rfi
-
-#ifndef CONFIG_ALTIVEC
-#define altivec_assist_exception	unknown_exception
-#endif
-
-	EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
-	EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
-	EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2f00, MOLTrampoline, unknown_exception, EXC_XFER_EE_LITE)
-
-	.globl mol_trampoline
-	.set mol_trampoline, i0x2f00
-
-	. = 0x3000
-
-AltiVecUnavailable:
-	EXCEPTION_PROLOG
-#ifdef CONFIG_ALTIVEC
-	bne	load_up_altivec		/* if from user, just load it up */
-#endif /* CONFIG_ALTIVEC */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
-
-#ifdef CONFIG_ALTIVEC
-/* Note that the AltiVec support is closely modeled after the FP
- * support.  Changes to one are likely to be applicable to the
- * other!  */
-load_up_altivec:
-/*
- * Disable AltiVec for the task which had AltiVec previously,
- * and save its AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- * On SMP we know the AltiVec units are free, since we give it up every
- * switch.  -- Kumar
- */
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-/*
- * For SMP, we don't do lazy AltiVec switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altivec in switch_to.
- */
-#ifndef CONFIG_SMP
-	tophys(r6,0)
-	addis	r3,r6,last_task_used_altivec@ha
-	lwz	r4,last_task_used_altivec@l(r3)
-	cmpwi	0,r4,0
-	beq	1f
-	add	r4,r4,r6
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_altivec */
-	SAVE_32VRS(0,r10,r4)
-	mfvscr	vr0
-	li	r10,THREAD_VSCR
-	stvx	vr0,r10,r4
-	lwz	r5,PT_REGS(r4)
-	add	r5,r5,r6
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_VEC@h
-	andc	r4,r4,r10	/* disable altivec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* enable use of AltiVec after return */
-	oris	r9,r9,MSR_VEC@h
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
-	li	r4,1
-	li	r10,THREAD_VSCR
-	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r5
-	mtvscr	vr0
-	REST_32VRS(0,r10,r5)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	sub	r4,r4,r6
-	stw	r4,last_task_used_altivec@l(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-	/* we haven't used ctr or xer or lr */
-	b	fast_exception_return
-
-/*
- * giveup_altivec(tsk)
- * Disable AltiVec for the task given as the argument,
- * and save the AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- */
-
-	.globl	giveup_altivec
-giveup_altivec:
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	SYNC
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-	cmpwi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	lwz	r5,PT_REGS(r3)
-	cmpwi	0,r5,0
-	SAVE_32VRS(0, r4, r3)
-	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
-	beq	1f
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VEC@h
-	andc	r4,r4,r3		/* disable AltiVec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_altivec@ha
-	stw	r5,last_task_used_altivec@l(r4)
-#endif /* CONFIG_SMP */
-	blr
-#endif /* CONFIG_ALTIVEC */
-
-/*
- * This code is jumped to from the startup code to copy
- * the kernel image to physical address 0.
- */
-relocate_kernel:
-	addis	r9,r26,klimit@ha	/* fetch klimit */
-	lwz	r25,klimit@l(r9)
-	addis	r25,r25,-KERNELBASE@h
-	li	r3,0			/* Destination base address */
-	li	r6,0			/* Destination offset */
-	li	r5,0x4000		/* # bytes of memory to copy */
-	bl	copy_and_flush		/* copy the first 0x4000 bytes */
-	addi	r0,r3,4f@l		/* jump to the address of 4f */
-	mtctr	r0			/* in copy and do the rest. */
-	bctr				/* jump to the copy */
-4:	mr	r5,r25
-	bl	copy_and_flush		/* copy the rest */
-	b	turn_on_mmu
-
-/*
- * Copy routine used to copy the kernel to start at physical address 0
- * and flush and invalidate the caches as needed.
- * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
- * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
- */
-copy_and_flush:
-	addi	r5,r5,-4
-	addi	r6,r6,-4
-4:	li	r0,L1_CACHE_BYTES/4
-	mtctr	r0
-3:	addi	r6,r6,4			/* copy a cache line */
-	lwzx	r0,r6,r4
-	stwx	r0,r6,r3
-	bdnz	3b
-	dcbst	r6,r3			/* write it to memory */
-	sync
-	icbi	r6,r3			/* flush the icache line */
-	cmplw	0,r6,r5
-	blt	4b
-	sync				/* additional sync needed on g4 */
-	isync
-	addi	r5,r5,4
-	addi	r6,r6,4
-	blr
-
-#ifdef CONFIG_SMP
-	.globl	__secondary_start_pmac_0
-__secondary_start_pmac_0:
-	/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
-	li	r24,0
-	b	1f
-	li	r24,1
-	b	1f
-	li	r24,2
-	b	1f
-	li	r24,3
-1:
-	/* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
-	   set to map the 0xf0000000 - 0xffffffff region */
-	mfmsr	r0
-	rlwinm	r0,r0,0,28,26		/* clear DR (0x10) */
-	SYNC
-	mtmsr	r0
-	isync
-
-	.globl	__secondary_start
-__secondary_start:
-	/* Copy some CPU settings from CPU 0 */
-	bl	__restore_cpu_setup
-
-	lis	r3,-KERNELBASE@h
-	mr	r4,r24
-	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
-#ifdef CONFIG_6xx
-	lis	r3,-KERNELBASE@h
-	bl	init_idle_6xx
-#endif /* CONFIG_6xx */
-
-	/* get current_thread_info and current */
-	lis	r1,secondary_ti@ha
-	tophys(r1,r1)
-	lwz	r1,secondary_ti@l(r1)
-	tophys(r2,r1)
-	lwz	r2,TI_TASK(r2)
-
-	/* stack */
-	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
-	li	r0,0
-	tophys(r3,r1)
-	stw	r0,0(r3)
-
-	/* load up the MMU */
-	bl	load_up_mmu
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* phys address of our thread_struct */
-	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
-	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
-
-	/* enable MMU and jump to start_secondary */
-	li	r4,MSR_KERNEL
-	FIX_SRR1(r4,r5)
-	lis	r3,start_secondary@h
-	ori	r3,r3,start_secondary@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	SYNC
-	RFI
-#endif /* CONFIG_SMP */
-
-/*
- * Those generic dummy functions are kept for CPUs not
- * included in CONFIG_6xx
- */
-#if !defined(CONFIG_6xx)
-_GLOBAL(__save_cpu_setup)
-	blr
-_GLOBAL(__restore_cpu_setup)
-	blr
-#endif /* !defined(CONFIG_6xx) */
-
-
-/*
- * Load stuff into the MMU.  Intended to be called with
- * IR=0 and DR=0.
- */
-load_up_mmu:
-	sync			/* Force all PTE updates to finish */
-	isync
-	tlbia			/* Clear all TLB entries */
-	sync			/* wait for tlbia/tlbie to finish */
-	TLBSYNC			/* ... on all CPUs */
-	/* Load the SDR1 register (hash table base & size) */
-	lis	r6,_SDR1@ha
-	tophys(r6,r6)
-	lwz	r6,_SDR1@l(r6)
-	mtspr	SPRN_SDR1,r6
-	li	r0,16		/* load up segment register values */
-	mtctr	r0		/* for context 0 */
-	lis	r3,0x2000	/* Ku = 1, VSID = 0 */
-	li	r4,0
-3:	mtsrin	r3,r4
-	addi	r3,r3,0x111	/* increment VSID */
-	addis	r4,r4,0x1000	/* address of next segment */
-	bdnz	3b
-
-/* Load the BAT registers with the values set up by MMU_init.
-   MMU_init takes care of whether we're on a 601 or not. */
-	mfpvr	r3
-	srwi	r3,r3,16
-	cmpwi	r3,1
-	lis	r3,BATS@ha
-	addi	r3,r3,BATS@l
-	tophys(r3,r3)
-	LOAD_BAT(0,r3,r4,r5)
-	LOAD_BAT(1,r3,r4,r5)
-	LOAD_BAT(2,r3,r4,r5)
-	LOAD_BAT(3,r3,r4,r5)
-
-	blr
-
-/*
- * This is where the main kernel code starts.
- */
-start_here:
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-	/* Set up for using our exception vectors */
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
-	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-/*
- * Do early bootinfo parsing, platform-specific initialization,
- * and set up the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/*
- * Go back to running unmapped so we can load up new values
- * for SDR1 (hash table pointer) and the segment registers
- * and change to using our exception vectors.
- */
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	FIX_SRR1(r3,r5)
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	SYNC
-	RFI
-/* Load up the kernel context */
-2:	bl	load_up_mmu
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Add helper information for the Abatron bdiGDB debugger.
-	 * We do this here because we know the mmu is disabled, and
-	 * will be enabled for real in just a few instructions.
-	 */
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* This much match your Abatron config */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	tophys(r5, r5)
-	stw	r6, 0(r5)
-#endif /* CONFIG_BDI_SWITCH */
-
-/* Now turn on the MMU for real! */
-	li	r4,MSR_KERNEL
-	FIX_SRR1(r4,r5)
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	SYNC
-	RFI
-
-/*
- * Set up the segment registers for a new context.
- */
-_GLOBAL(set_context)
-	mulli	r3,r3,897	/* multiply context by skew factor */
-	rlwinm	r3,r3,4,8,27	/* VSID = (context & 0xfffff) << 4 */
-	addis	r3,r3,0x6000	/* Set Ks, Ku bits */
-	li	r0,NUM_USER_SEGMENTS
-	mtctr	r0
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is passed as second argument.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-	li	r4,0
-	isync
-3:
-	mtsrin	r3,r4
-	addi	r3,r3,0x111	/* next VSID */
-	rlwinm	r3,r3,0,8,3	/* clear out any overflow from VSID field */
-	addis	r4,r4,0x1000	/* address of next segment */
-	bdnz	3b
-	sync
-	isync
-	blr
-
-/*
- * An undocumented "feature" of 604e requires that the v bit
- * be cleared before changing BAT values.
- *
- * Also, newer IBM firmware does not clear bat3 and 4 so
- * this makes sure it's done.
- *  -- Cort
- */
-clear_bats:
-	li	r10,0
-	mfspr	r9,SPRN_PVR
-	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
-	cmpwi	r9, 1
-	beq	1f
-
-	mtspr	SPRN_DBAT0U,r10
-	mtspr	SPRN_DBAT0L,r10
-	mtspr	SPRN_DBAT1U,r10
-	mtspr	SPRN_DBAT1L,r10
-	mtspr	SPRN_DBAT2U,r10
-	mtspr	SPRN_DBAT2L,r10
-	mtspr	SPRN_DBAT3U,r10
-	mtspr	SPRN_DBAT3L,r10
-1:
-	mtspr	SPRN_IBAT0U,r10
-	mtspr	SPRN_IBAT0L,r10
-	mtspr	SPRN_IBAT1U,r10
-	mtspr	SPRN_IBAT1L,r10
-	mtspr	SPRN_IBAT2U,r10
-	mtspr	SPRN_IBAT2L,r10
-	mtspr	SPRN_IBAT3U,r10
-	mtspr	SPRN_IBAT3L,r10
-BEGIN_FTR_SECTION
-	/* Here's a tweak: at this point, CPU setup have
-	 * not been called yet, so HIGH_BAT_EN may not be
-	 * set in HID0 for the 745x processors. However, it
-	 * seems that doesn't affect our ability to actually
-	 * write to these SPRs.
-	 */
-	mtspr	SPRN_DBAT4U,r10
-	mtspr	SPRN_DBAT4L,r10
-	mtspr	SPRN_DBAT5U,r10
-	mtspr	SPRN_DBAT5L,r10
-	mtspr	SPRN_DBAT6U,r10
-	mtspr	SPRN_DBAT6L,r10
-	mtspr	SPRN_DBAT7U,r10
-	mtspr	SPRN_DBAT7L,r10
-	mtspr	SPRN_IBAT4U,r10
-	mtspr	SPRN_IBAT4L,r10
-	mtspr	SPRN_IBAT5U,r10
-	mtspr	SPRN_IBAT5L,r10
-	mtspr	SPRN_IBAT6U,r10
-	mtspr	SPRN_IBAT6L,r10
-	mtspr	SPRN_IBAT7U,r10
-	mtspr	SPRN_IBAT7L,r10
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
-	blr
-
-flush_tlbs:
-	lis	r10, 0x40
-1:	addic.	r10, r10, -0x1000
-	tlbie	r10
-	blt	1b
-	sync
-	blr
-
-mmu_off:
- 	addi	r4, r3, __after_mmu_off - _start
-	mfmsr	r3
-	andi.	r0,r3,MSR_DR|MSR_IR		/* MMU enabled? */
-	beqlr
-	andc	r3,r3,r0
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	sync
-	RFI
-
-/*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to KERNELBASE.  From this point on we can't safely
- * call OF any more.
- */
-initial_bats:
-	lis	r11,KERNELBASE@h
-	mfspr	r9,SPRN_PVR
-	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
-	cmpwi	0,r9,1
-	bne	4f
-	ori	r11,r11,4		/* set up BAT registers for 601 */
-	li	r8,0x7f			/* valid, block length = 8MB */
-	oris	r9,r11,0x800000@h	/* set up BAT reg for 2nd 8M */
-	oris	r10,r8,0x800000@h	/* set up BAT reg for 2nd 8M */
-	mtspr	SPRN_IBAT0U,r11		/* N.B. 601 has valid bit in */
-	mtspr	SPRN_IBAT0L,r8		/* lower BAT register */
-	mtspr	SPRN_IBAT1U,r9
-	mtspr	SPRN_IBAT1L,r10
-	isync
-	blr
-
-4:	tophys(r8,r11)
-#ifdef CONFIG_SMP
-	ori	r8,r8,0x12		/* R/W access, M=1 */
-#else
-	ori	r8,r8,2			/* R/W access */
-#endif /* CONFIG_SMP */
-	ori	r11,r11,BL_256M<<2|0x2	/* set up BAT registers for 604 */
-
-	mtspr	SPRN_DBAT0L,r8		/* N.B. 6xx (not 601) have valid */
-	mtspr	SPRN_DBAT0U,r11		/* bit in upper BAT register */
-	mtspr	SPRN_IBAT0L,r8
-	mtspr	SPRN_IBAT0U,r11
-	isync
-	blr
-
-#ifdef CONFIG_BOOTX_TEXT
-setup_disp_bat:
-	/*
-	 * setup the display bat prepared for us in prom.c
-	 */
-	mflr	r8
-	bl	reloc_offset
-	mtlr	r8
-	addis	r8,r3,disp_BAT@ha
-	addi	r8,r8,disp_BAT@l
-	lwz	r11,0(r8)
-	lwz	r8,4(r8)
-	mfspr	r9,SPRN_PVR
-	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
-	cmpwi	0,r9,1
-	beq	1f
-	mtspr	SPRN_DBAT3L,r8
-	mtspr	SPRN_DBAT3U,r11
-	blr
-1:	mtspr	SPRN_IBAT3L,r8
-	mtspr	SPRN_IBAT3U,r11
-	blr
-
-#endif /* defined(CONFIG_BOOTX_TEXT) */
-
-#ifdef CONFIG_8260
-/* Jump into the system reset for the rom.
- * We first disable the MMU, and then jump to the ROM reset address.
- *
- * r3 is the board info structure, r4 is the location for starting.
- * I use this for building a small kernel that can load other kernels,
- * rather than trying to write or rely on a rom monitor that can tftp load.
- */
-       .globl  m8260_gorom
-m8260_gorom:
-	mfmsr	r0
-	rlwinm	r0,r0,0,17,15	/* clear MSR_EE in r0 */
-	sync
-	mtmsr	r0
-	sync
-	mfspr	r11, SPRN_HID0
-	lis	r10, 0
-	ori	r10,r10,HID0_ICE|HID0_DCE
-	andc	r11, r11, r10
-	mtspr	SPRN_HID0, r11
-	isync
-	li	r5, MSR_ME|MSR_RI
-	lis	r6,2f@h
-	addis	r6,r6,-KERNELBASE@h
-	ori	r6,r6,2f@l
-	mtspr	SPRN_SRR0,r6
-	mtspr	SPRN_SRR1,r5
-	isync
-	sync
-	rfi
-2:
-	mtlr	r4
-	blr
-#endif
-
-
-/*
- * We put a few things here that have to be page-aligned.
- * This stuff goes at the beginning of the data segment,
- * which is page-aligned.
- */
-	.data
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * Used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-	.globl intercept_table
-intercept_table:
-	.long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700
-	.long i0x800, 0, 0, 0, 0, i0xd00, 0, 0
-	.long 0, 0, 0, i0x1300, 0, 0, 0, 0
-	.long 0, 0, 0, 0, 0, 0, 0, 0
-	.long 0, 0, 0, 0, 0, 0, 0, 0
-	.long 0, 0, 0, 0, 0, 0, 0, 0
-
-/* Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
deleted file mode 100644
index ebb5a403829f..000000000000
--- a/arch/ppc/kernel/head_44x.S
+++ /dev/null
@@ -1,769 +0,0 @@
-/*
- * Kernel execution entry point code.
- *
- *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
- *      Initial PowerPC version.
- *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
- *      Rewritten for PReP
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Low-level exception handers, MMU support, and rewrite.
- *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *      PowerPC 8xx modifications.
- *    Copyright (c) 1998-1999 TiVo, Inc.
- *      PowerPC 403GCX modifications.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      PowerPC 403GCX/405GP modifications.
- *    Copyright 2000 MontaVista Software Inc.
- *	PPC405 modifications
- *      PowerPC 403GCX/405GP modifications.
- * 	Author: MontaVista Software, Inc.
- *         	frank_rowand@mvista.com or source@mvista.com
- * 	   	debbie_chu@mvista.com
- *    Copyright 2002-2005 MontaVista Software, Inc.
- *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/ibm44x.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include "head_booke.h"
-
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- *   r4 - Starting address of the init RAM disk
- *   r5 - Ending address of the init RAM disk
- *   r6 - Start of kernel command line string (e.g. "mem=128")
- *   r7 - End of kernel command line string
- *
- */
-	.text
-_GLOBAL(_stext)
-_GLOBAL(_start)
-	/*
-	 * Reserve a word at a fixed location to store the address
-	 * of abatron_pteptrs
-	 */
-	nop
-/*
- * Save parameters we are passed
- */
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-	li	r24,0		/* CPU number */
-
-/*
- * Set up the initial MMU state
- *
- * We are still executing code at the virtual address
- * mappings set by the firmware for the base of RAM.
- *
- * We first invalidate all TLB entries but the one
- * we are running from.  We then load the KERNELBASE
- * mappings so we can begin to use kernel addresses
- * natively and so the interrupt vector locations are
- * permanently pinned (necessary since Book E
- * implementations always have translation enabled).
- *
- * TODO: Use the known TLB entry we are running from to
- *	 determine which physical region we are located
- *	 in.  This can be used to determine where in RAM
- *	 (on a shared CPU system) or PCI memory space
- *	 (on a DRAMless system) we are located.
- *       For now, we assume a perfect world which means
- *	 we are located at the base of DRAM (physical 0).
- */
-
-/*
- * Search TLB for entry that we are currently using.
- * Invalidate all entries but the one we are using.
- */
-	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
-	mfspr	r3,SPRN_PID			/* Get PID */
-	mfmsr	r4				/* Get MSR */
-	andi.	r4,r4,MSR_IS@l			/* TS=1? */
-	beq	wmmucr				/* If not, leave STS=0 */
-	oris	r3,r3,PPC44x_MMUCR_STS@h	/* Set STS=1 */
-wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
-	sync
-
-	bl	invstr				/* Find our address */
-invstr:	mflr	r5				/* Make it accessible */
-	tlbsx	r23,0,r5			/* Find entry we are in */
-	li	r4,0				/* Start at TLB entry 0 */
-	li	r3,0				/* Set PAGEID inval value */
-1:	cmpw	r23,r4				/* Is this our entry? */
-	beq	skpinv				/* If so, skip the inval */
-	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
-skpinv:	addi	r4,r4,1				/* Increment */
-	cmpwi	r4,64				/* Are we done? */
-	bne	1b				/* If not, repeat */
-	isync					/* If so, context change */
-
-/*
- * Configure and load pinned entry into TLB slot 63.
- */
-
-	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
-	ori	r3,r3,KERNELBASE@l
-
-	/* Kernel is at the base of RAM */
-	li r4, 0			/* Load the kernel physical address */
-
-	/* Load the kernel PID = 0 */
-	li	r0,0
-	mtspr	SPRN_PID,r0
-	sync
-
-	/* Initialize MMUCR */
-	li	r5,0
-	mtspr	SPRN_MMUCR,r5
-	sync
-
- 	/* pageid fields */
-	clrrwi	r3,r3,10		/* Mask off the effective page number */
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
-
-	/* xlat fields */
-	clrrwi	r4,r4,10		/* Mask off the real page number */
-					/* ERPN is 0 for first 4GB page */
-
-	/* attrib fields */
-	/* Added guarded bit to protect against speculative loads/stores */
-	li	r5,0
-	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
-
-        li      r0,63                    /* TLB slot 63 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
-	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
-
-	/* Force context change */
-	mfmsr	r0
-	mtspr	SPRN_SRR1, r0
-	lis	r0,3f@h
-	ori	r0,r0,3f@l
-	mtspr	SPRN_SRR0,r0
-	sync
-	rfi
-
-	/* If necessary, invalidate original entry we used */
-3:	cmpwi	r23,63
-	beq	4f
-	li	r6,0
-	tlbwe   r6,r23,PPC44x_TLB_PAGEID
-	isync
-
-4:
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	/*
-	 * Add temporary UART mapping for early debug.
-	 * We can map UART registers wherever we want as long as they don't
-	 * interfere with other system mappings (e.g. with pinned entries).
-	 * For an example of how we handle this - see ocotea.h.       --ebs
-	 */
- 	/* pageid fields */
-	lis	r3,UART0_IO_BASE@h
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
-
-	/* xlat fields */
-	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
-#ifdef UART0_PHYS_ERPN
-	ori	r4,r4,UART0_PHYS_ERPN		/* Add ERPN if above 4GB */
-#endif
-
-	/* attrib fields */
-	li	r5,0
-	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
-
-	li	r0,62			/* TLB slot 62 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
-	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
-
-	/* Force context change */
-	isync
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-
-	/* Establish the interrupt vector offsets */
-	SET_IVOR(0,  CriticalInput);
-	SET_IVOR(1,  MachineCheck);
-	SET_IVOR(2,  DataStorage);
-	SET_IVOR(3,  InstructionStorage);
-	SET_IVOR(4,  ExternalInput);
-	SET_IVOR(5,  Alignment);
-	SET_IVOR(6,  Program);
-	SET_IVOR(7,  FloatingPointUnavailable);
-	SET_IVOR(8,  SystemCall);
-	SET_IVOR(9,  AuxillaryProcessorUnavailable);
-	SET_IVOR(10, Decrementer);
-	SET_IVOR(11, FixedIntervalTimer);
-	SET_IVOR(12, WatchdogTimer);
-	SET_IVOR(13, DataTLBError);
-	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, Debug);
-
-	/* Establish the interrupt vector base */
-	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
-	mtspr	SPRN_IVPR,r4
-
-	/*
-	 * This is where the main kernel code starts.
-	 */
-
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to current thread */
-	addi	r4,r2,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-
-	/* stack */
-	lis	r1,init_thread_union@h
-	ori	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-	/* Setup PTE pointers for the Abatron bdiGDB */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	lis	r4, KERNELBASE@h
-	ori	r4, r4, KERNELBASE@l
-	stw	r5, 0(r4)	/* Save abatron_pteptrs at a fixed location */
-	stw	r6, 0(r5)
-
-	/* Let's move on */
-	lis	r4,start_kernel@h
-	ori	r4,r4,start_kernel@l
-	lis	r3,MSR_KERNEL@h
-	ori	r3,r3,MSR_KERNEL@l
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi			/* change context and jump to start_kernel */
-
-/*
- * Interrupt vector entry code
- *
- * The Book E MMUs are always on so we don't need to handle
- * interrupts in real mode as with previous PPC processors. In
- * this case we handle interrupts in the kernel virtual address
- * space.
- *
- * Interrupt vectors are dynamically placed relative to the
- * interrupt prefix as determined by the address of interrupt_base.
- * The interrupt vectors offsets are programmed using the labels
- * for each interrupt vector entry.
- *
- * Interrupt vectors must be aligned on a 16 byte boundary.
- * We align on a 32 byte cache line boundary for good measure.
- */
-
-interrupt_base:
-	/* Critical Input Interrupt */
-	CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
-
-	/* Machine Check Interrupt */
-#ifdef CONFIG_440A
-	MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#else
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#endif
-
-	/* Data Storage Interrupt */
-	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr   r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR		/* Get MMUCR */
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr   SPRN_MMUCR,r12
-
-	rlwinm  r12, r10, 13, 19, 29    /* Compute pgdir/pmd offset */
-	lwzx    r11, r12, r11           /* Get pgd/pmd entry */
-	rlwinm. r12, r11, 0, 0, 20      /* Extract pt base address */
-	beq     2f                      /* Bail if no table */
-
-	rlwimi  r12, r10, 23, 20, 28    /* Compute pte address */
-	lwz     r11, 4(r12)             /* Get pte entry */
-
-	andi.	r13, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 4(r12)		/* Update Linux page table */
-
-	li	r13, PPC44x_TLB_SR@l	/* Set SR */
-	rlwimi	r13, r11, 29, 29, 29	/* SX = _PAGE_HWEXEC */
-	rlwimi	r13, r11, 0, 30, 30	/* SW = _PAGE_RW */
-	rlwimi	r13, r11, 29, 28, 28	/* UR = _PAGE_USER */
-	rlwimi	r12, r11, 31, 26, 26	/* (_PAGE_USER>>1)->r12 */
-	rlwimi	r12, r11, 29, 30, 30	/* (_PAGE_USER>>3)->r12 */
-	and	r12, r12, r11		/* HWEXEC/RW & USER */
-	rlwimi	r13, r12, 0, 26, 26	/* UX = HWEXEC & USER */
-	rlwimi	r13, r12, 3, 27, 27	/* UW = RW & USER */
-
-	rlwimi	r11,r13,0,26,31		/* Insert static perms */
-
-	rlwinm	r11,r11,0,20,15		/* Clear U0-U3 */
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	r10, 0, r10
-
-	tlbwe	r11, r10, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
-
-	/* Done...restore registers and get out of here.
-	*/
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction Storage Interrupt */
-	INSTRUCTION_STORAGE_EXCEPTION
-
-	/* External Input Interrupt */
-	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
-
-	/* Alignment Interrupt */
-	ALIGNMENT_EXCEPTION
-
-	/* Program Interrupt */
-	PROGRAM_EXCEPTION
-
-	/* Floating Point Unavailable Interrupt */
-#ifdef CONFIG_PPC_FPU
-	FP_UNAVAILABLE_EXCEPTION
-#else
-	EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
-#endif
-
-	/* System Call Interrupt */
-	START_EXCEPTION(SystemCall)
-	NORMAL_EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
-
-	/* Auxillary Processor Unavailable Interrupt */
-	EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
-
-	/* Decrementer Interrupt */
-	DECREMENTER_EXCEPTION
-
-	/* Fixed Internal Timer Interrupt */
-	/* TODO: Add FIT support */
-	EXCEPTION(0x1010, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
-
-	/* Watchdog Timer Interrupt */
-	/* TODO: Add watchdog support */
-#ifdef CONFIG_BOOKE_WDT
-	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
-#else
-	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, unknown_exception)
-#endif
-
-	/* Data TLB Error Interrupt */
-	START_EXCEPTION(DataTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr	r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr	SPRN_MMUCR,r12
-
-	rlwinm 	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
-	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
-	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
-
-	 /* Jump to common tlb load */
-	b	finish_tlb_load
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction TLB Error Interrupt */
-	/*
-	 * Nearly the same as above, except we get our
-	 * information from different registers and bailout
-	 * to a different point.
-	 */
-	START_EXCEPTION(InstructionTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-	mfspr	r10, SPRN_SRR0		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr	r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr	SPRN_MMUCR,r12
-
-	rlwinm	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
-	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
-	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
-
-	/* Jump to common TLB load point */
-	b	finish_tlb_load
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	InstructionStorage
-
-	/* Debug Interrupt */
-	DEBUG_EXCEPTION
-
-/*
- * Local functions
- */
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-
-/*
-
- * Both the instruction and data TLB miss get to this
- * point to load the TLB.
- * 	r10 - EA of fault
- * 	r11 - available to use
- *	r12 - Pointer to the 64-bit PTE
- *	r13 - available to use
- *	MMUCR - loaded with proper value when we get here
- *	Upon exit, we reload everything and RFI.
- */
-finish_tlb_load:
-	/*
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-
-	/* Load the next available TLB index */
-	lis	r13, tlb_44x_index@ha
-	lwz	r13, tlb_44x_index@l(r13)
-	/* Load the TLB high watermark */
-	lis	r11, tlb_44x_hwater@ha
-	lwz	r11, tlb_44x_hwater@l(r11)
-
-	/* Increment, rollover, and store TLB index */
-	addi	r13, r13, 1
-	cmpw	0, r13, r11			/* reserve entries */
-	ble	7f
-	li	r13, 0
-7:
-	/* Store the next available TLB index */
-	lis	r11, tlb_44x_index@ha
-	stw	r13, tlb_44x_index@l(r11)
-
-	lwz	r11, 0(r12)			/* Get MS word of PTE */
-	lwz	r12, 4(r12)			/* Get LS word of PTE */
-	rlwimi	r11, r12, 0, 0 , 19		/* Insert RPN */
-	tlbwe	r11, r13, PPC44x_TLB_XLAT	/* Write XLAT */
-
-	/*
-	 * Create PAGEID. This is the faulting address,
-	 * page size, and valid flag.
-	 */
-	li	r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
-	rlwimi	r10, r11, 0, 20, 31		/* Insert valid and page size */
-	tlbwe	r10, r13, PPC44x_TLB_PAGEID	/* Write PAGEID */
-
-	li	r10, PPC44x_TLB_SR@l		/* Set SR */
-	rlwimi	r10, r12, 0, 30, 30		/* Set SW = _PAGE_RW */
-	rlwimi	r10, r12, 29, 29, 29		/* SX = _PAGE_HWEXEC */
-	rlwimi	r10, r12, 29, 28, 28		/* UR = _PAGE_USER */
-	rlwimi	r11, r12, 31, 26, 26		/* (_PAGE_USER>>1)->r12 */
-	and	r11, r12, r11			/* HWEXEC & USER */
-	rlwimi	r10, r11, 0, 26, 26		/* UX = HWEXEC & USER */
-
-	rlwimi	r12, r10, 0, 26, 31		/* Insert static perms */
-	rlwinm	r12, r12, 0, 20, 15		/* Clear U0-U3 */
-	tlbwe	r12, r13, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
-
-	/* Done...restore registers and get out of here.
-	*/
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi					/* Force context change */
-
-/*
- * Global functions
- */
-
-/*
- * extern void giveup_altivec(struct task_struct *prev)
- *
- * The 44x core does not have an AltiVec unit.
- */
-_GLOBAL(giveup_altivec)
-	blr
-
-/*
- * extern void giveup_fpu(struct task_struct *prev)
- *
- * The 44x core does not have an FPU.
- */
-#ifndef CONFIG_PPC_FPU
-_GLOBAL(giveup_fpu)
-	blr
-#endif
-
-/*
- * extern void abort(void)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(abort)
-        mfspr   r13,SPRN_DBCR0
-        oris    r13,r13,DBCR0_RST_SYSTEM@h
-        mtspr   SPRN_DBCR0,r13
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is the second parameter.
-	 */
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r4, 0x4(r5)
-#endif
-	mtspr	SPRN_PID,r3
-	isync			/* Force context change */
-	blr
-
-/*
- * We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
-	.data
-	.align	12
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-
-/*
- * To support >32-bit physical addresses, we use an 8KB pgdir.
- */
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	8192
-
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE
-	.globl	exception_stack_top
-exception_stack_top:
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/*
- * Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/head_4xx.S b/arch/ppc/kernel/head_4xx.S
deleted file mode 100644
index 51da157a629e..000000000000
--- a/arch/ppc/kernel/head_4xx.S
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
- *      Initial PowerPC version.
- *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
- *      Rewritten for PReP
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Low-level exception handers, MMU support, and rewrite.
- *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *      PowerPC 8xx modifications.
- *    Copyright (c) 1998-1999 TiVo, Inc.
- *      PowerPC 403GCX modifications.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      PowerPC 403GCX/405GP modifications.
- *    Copyright 2000 MontaVista Software Inc.
- *	PPC405 modifications
- *      PowerPC 403GCX/405GP modifications.
- * 	Author: MontaVista Software, Inc.
- *         	frank_rowand@mvista.com or source@mvista.com
- * 	   	debbie_chu@mvista.com
- *
- *
- *    Module name: head_4xx.S
- *
- *    Description:
- *      Kernel execution entry point code.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- *   r4 - Starting address of the init RAM disk
- *   r5 - Ending address of the init RAM disk
- *   r6 - Start of kernel command line string (e.g. "mem=96m")
- *   r7 - End of kernel command line string
- *
- * This is all going to change RSN when we add bi_recs.......  -- Dan
- */
-	.text
-_GLOBAL(_stext)
-_GLOBAL(_start)
-
-	/* Save parameters we are passed.
-	*/
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-
-	/* We have to turn on the MMU right away so we get cache modes
-	 * set correctly.
-	 */
-	bl	initial_mmu
-
-/* We now have the lower 16 Meg mapped into TLB entries, and the caches
- * ready to work.
- */
-turn_on_mmu:
-	lis	r0,MSR_KERNEL@h
-	ori	r0,r0,MSR_KERNEL@l
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	rfi				/* enables MMU */
-	b	.			/* prevent prefetch past rfi */
-
-/*
- * This area is used for temporarily saving registers during the
- * critical exception prolog.
- */
-	. = 0xc0
-crit_save:
-_GLOBAL(crit_r10)
-	.space	4
-_GLOBAL(crit_r11)
-	.space	4
-
-/*
- * Exception vector entry code. This code runs with address translation
- * turned off (i.e. using physical addresses). We assume SPRG3 has the
- * physical address of the current task thread_struct.
- * Note that we have to have decremented r1 before we write to any fields
- * of the exception frame, since a critical interrupt could occur at any
- * time, and it will write to the area immediately below the current r1.
- */
-#define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG2,r1;						     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
-	addi	r1,r1,THREAD_SIZE;					     \
-1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	tophys(r11,r1);							     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
-	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
-	stw	r12,GPR11(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG2;						     \
-	mfspr	r12,SPRN_SRR0;						     \
-	stw	r10,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR1;						     \
-	stw	r10,0(r11);						     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for critical exceptions.  This is a little different
- * from the normal exception prolog above since a critical exception
- * can potentially occur at any point during normal exception processing.
- * Thus we cannot use the same SPRG registers as the normal prolog above.
- * Instead we use a couple of words of memory at low physical addresses.
- * This is OK since we don't support SMP on these processors.
- */
-#define CRITICAL_EXCEPTION_PROLOG					     \
-	stw	r10,crit_r10@l(0);	/* save two registers to work with */\
-	stw	r11,crit_r11@l(0);					     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	lis	r11,critical_stack_top@h;				     \
-	ori	r11,r11,critical_stack_top@l;				     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	tophys(r11,r11);						     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
-	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
-	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
-	stw	r9,_ESR(r11);		/* exception was taken		   */\
-	mfspr	r12,SPRN_SRR2;						     \
-	stw	r1,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR3;						     \
-	stw	r1,0(r11);						     \
-	tovirt(r1,r11);							     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-	/*
-	 * State at this point:
-	 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
-	 * r10 saved in crit_r10 and in stack frame, trashed
-	 * r11 saved in crit_r11 and in stack frame,
-	 *	now phys stack/exception frame pointer
-	 * r12 saved in stack frame, now saved SRR2
-	 * CR saved in stack frame, CR0.EQ = !SRR3.PR
-	 * LR, DEAR, ESR in stack frame
-	 * r1 saved in stack frame, now virt stack/excframe pointer
-	 * r0, r3-r8 saved in stack frame
-	 */
-
-/*
- * Exception vectors.
- */
-#define	START_EXCEPTION(n, label)					     \
-	. = n;								     \
-label:
-
-#define EXCEPTION(n, label, hdlr, xfer)				\
-	START_EXCEPTION(n, label);				\
-	NORMAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(n, label);				\
-	CRITICAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, crit_transfer_to_handler,	\
-			  ret_from_crit_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	lis	r10,msr@h;					\
-	ori	r10,r10,msr@l;					\
-	copyee(r10, r9);					\
-	bl	tfer;		 				\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-
-/*
- * 0x0100 - Critical Interrupt Exception
- */
-	CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
-
-/*
- * 0x0200 - Machine Check Exception
- */
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-
-/*
- * 0x0300 - Data Storage Exception
- * This happens for just a few reasons.  U0 set (but we don't do that),
- * or zone protection fault (user violation, write to protected page).
- * If this is just an update of modified status, we do that quickly
- * and exit.  Otherwise, we call heavywight functions to do the work.
- */
-	START_EXCEPTION(0x0300,	DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-
-	/* First, check if it was a zone fault (which means a user
-	* tried to access a kernel or read-protected page - always
-	* a SEGV).  All other faults here must be stores, so no
-	* need to check ESR_DST as well. */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_DIZ@h
-	bne	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r11, 0(r11)		/* Get L1 entry */
-	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-
-	andi.	r9, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 0(r12)		/* Update Linux page table */
-
-	/* Most of the Linux PTE is ready to load into the TLB LO.
-	 * We set ZSEL, where only the LS-bit determines user access.
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-	li	r12, 0x0ce2
-	andc	r11, r11, r12		/* Make sure 20, 21 are zero */
-
-	/* find the TLB index that caused the fault.  It has to be here.
-	*/
-	tlbsx	r9, 0, r10
-
-	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
-
-	/* Done...restore registers and get out of here.
-	*/
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	PPC405_ERR77_SYNC
-	rfi			/* Should sync shadow TLBs */
-	b	.		/* prevent prefetch past rfi */
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	DataAccess
-
-/*
- * 0x0400 - Instruction Storage Exception
- * This is caused by a fetch from non-execute or guarded pages.
- */
-	START_EXCEPTION(0x0400, InstructionAccess)
-	NORMAL_EXCEPTION_PROLOG
-	mr	r4,r12			/* Pass SRR0 as arg2 */
-	li	r5,0			/* Pass zero as arg3 */
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* 0x0500 - External Interrupt Exception */
-	EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* 0x0600 - Alignment Exception */
-	START_EXCEPTION(0x0600, Alignment)
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR and save it */
-	stw	r4,_DEAR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* 0x0700 - Program Exception */
-	START_EXCEPTION(0x0700, ProgramCheck)
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
-	stw	r4,_ESR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x700, program_check_exception)
-
-	EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
-
-/* 0x0C00 - System Call Exception */
-	START_EXCEPTION(0x0C00,	SystemCall)
-	NORMAL_EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
-
-/* 0x1000 - Programmable Interval Timer (PIT) Exception */
-	START_EXCEPTION(0x1000, Decrementer)
-	NORMAL_EXCEPTION_PROLOG
-	lis	r0,TSR_PIS@h
-	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_LITE(0x1000, timer_interrupt)
-
-#if 0
-/* NOTE:
- * FIT and WDT handlers are not implemented yet.
- */
-
-/* 0x1010 - Fixed Interval Timer (FIT) Exception
-*/
-	STND_EXCEPTION(0x1010,	FITException,		unknown_exception)
-
-/* 0x1020 - Watchdog Timer (WDT) Exception
-*/
-#ifdef CONFIG_BOOKE_WDT
-	CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
-#else
-	CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
-#endif
-#endif
-
-/* 0x1100 - Data TLB Miss Exception
- * As the name implies, translation is not in the MMU, so search the
- * page tables and fix it.  The only purpose of this function is to
- * load TLB entries from the page table if they exist.
- */
-	START_EXCEPTION(0x1100,	DTLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-	andi.	r9, r11, _PAGE_PRESENT
-	beq	5f
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 0(r12)
-
-	/* Create TLB tag.  This is the faulting address plus a static
-	 * set of bits.  These are size, valid, E, U0.
-	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
-
-	b	finish_tlb_load
-
-2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
-	beq	5f
-
-	/* Create TLB tag.  This is the faulting address, plus a static
-	 * set of bits (valid, E, U0) plus the size from the PMD.
-	 */
-	ori	r9, r9, 0x40
-	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
-
-	b	finish_tlb_load
-
-5:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	DataAccess
-
-/* 0x1200 - Instruction TLB Miss Exception
- * Nearly the same as above, except we get our information from different
- * registers and bailout to a different point.
- */
-	START_EXCEPTION(0x1200,	ITLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-	mfspr	r10, SPRN_SRR0		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-	andi.	r9, r11, _PAGE_PRESENT
-	beq	5f
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 0(r12)
-
-	/* Create TLB tag.  This is the faulting address plus a static
-	 * set of bits.  These are size, valid, E, U0.
-	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
-
-	b	finish_tlb_load
-
-2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
-	beq	5f
-
-	/* Create TLB tag.  This is the faulting address, plus a static
-	 * set of bits (valid, E, U0) plus the size from the PMD.
-	 */
-	ori	r9, r9, 0x40
-	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
-
-	b	finish_tlb_load
-
-5:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	InstructionAccess
-
-	EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-#ifdef CONFIG_IBM405_ERR51
-	/* 405GP errata 51 */
-	START_EXCEPTION(0x1700, Trap_17)
-	b DTLBMiss
-#else
-	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
-#endif
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
-
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved.  This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_SRR1, which will still have
- * the MSR_DE bit set.
- */
-	/* 0x2000 - Debug Exception */
-	START_EXCEPTION(0x2000, DebugTrap)
-	CRITICAL_EXCEPTION_PROLOG
-
-	/*
-	 * If this is a single step or branch-taken exception in an
-	 * exception entry sequence, it was probably meant to apply to
-	 * the code where the exception occurred (since exception entry
-	 * doesn't turn off DE automatically).  We simulate the effect
-	 * of turning off DE on entry to an exception handler by turning
-	 * off DE in the SRR3 value and clearing the debug status.
-	 */
-	mfspr	r10,SPRN_DBSR		/* check single-step/branch taken */
-	andis.	r10,r10,DBSR_IC@h
-	beq+	2f
-
-	andi.	r10,r9,MSR_IR|MSR_PR	/* check supervisor + MMU off */
-	beq	1f			/* branch and fix it up */
-
-	mfspr   r10,SPRN_SRR2		/* Faulting instruction address */
-	cmplwi  r10,0x2100
-	bgt+    2f			/* address above exception vectors */
-
-	/* here it looks like we got an inappropriate debug exception. */
-1:	rlwinm	r9,r9,0,~MSR_DE		/* clear DE in the SRR3 value */
-	lis	r10,DBSR_IC@h		/* clear the IC event */
-	mtspr	SPRN_DBSR,r10
-	/* restore state and get out */
-	lwz	r10,_CCR(r11)
-	lwz	r0,GPR0(r11)
-	lwz	r1,GPR1(r11)
-	mtcrf	0x80,r10
-	mtspr	SPRN_SRR2,r12
-	mtspr	SPRN_SRR3,r9
-	lwz	r9,GPR9(r11)
-	lwz	r12,GPR12(r11)
-	lwz	r10,crit_r10@l(0)
-	lwz	r11,crit_r11@l(0)
-	PPC405_ERR77_SYNC
-	rfci
-	b	.
-
-	/* continue normal handling for a critical exception... */
-2:	mfspr	r4,SPRN_DBSR
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, \
-		(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-		NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
-/*
- * The other Data TLB exceptions bail out to this point
- * if they can't resolve the lightweight TLB fault.
- */
-DataAccess:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Other PowerPC processors, namely those derived from the 6xx-series
- * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
- * However, for the 4xx-series processors these are neither defined nor
- * reserved.
- */
-
-	/* Damn, I came up one instruction too many to fit into the
-	 * exception space :-).  Both the instruction and data TLB
-	 * miss get to this point to load the TLB.
-	 * 	r10 - TLB_TAG value
-	 * 	r11 - Linux PTE
-	 *	r12, r9 - avilable to use
-	 *	PID - loaded with proper value when we get here
-	 *	Upon exit, we reload everything and RFI.
-	 * Actually, it will fit now, but oh well.....a common place
-	 * to load the TLB.
-	 */
-tlb_4xx_index:
-	.long	0
-finish_tlb_load:
-	/* load the next available TLB index.
-	*/
-	lwz	r9, tlb_4xx_index@l(0)
-	addi	r9, r9, 1
-	andi.	r9, r9, (PPC4XX_TLB_SIZE-1)
-	stw	r9, tlb_4xx_index@l(0)
-
-6:
-	/*
-	 * Clear out the software-only bits in the PTE to generate the
-	 * TLB_DATA value.  These are the bottom 2 bits of the RPM, the
-	 * top 3 bits of the zone field, and M.
-	 */
-	li	r12, 0x0ce2
-	andc	r11, r11, r12
-
-	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
-	tlbwe	r10, r9, TLB_TAG		/* Load TLB HI */
-
-	/* Done...restore registers and get out of here.
-	*/
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	PPC405_ERR77_SYNC
-	rfi			/* Should sync shadow TLBs */
-	b	.		/* prevent prefetch past rfi */
-
-/* extern void giveup_fpu(struct task_struct *prev)
- *
- * The PowerPC 4xx family of processors do not have an FPU, so this just
- * returns.
- */
-_GLOBAL(giveup_fpu)
-	blr
-
-/* This is where the main kernel code starts.
- */
-start_here:
-
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init	/* We have to do this with MMU on */
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/* Go back to running unmapped so we can load up new values
- * and change to using our exception vectors.
- * On the 4xx, all we have to do is invalidate the TLB to clear
- * the old 16M byte TLB mappings.
- */
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	lis	r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
-	ori	r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi
-	b	.		/* prevent prefetch past rfi */
-
-/* Load up the kernel context */
-2:
-	sync			/* Flush to memory before changing TLB */
-	tlbia
-	isync			/* Flush shadow TLBs */
-
-	/* set up the PTE pointers for the Abatron bdiGDB.
-	*/
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
-	tophys(r5,r5)
-	stw	r6, 0(r5)
-
-/* Now turn on the MMU for real! */
-	lis	r4,MSR_KERNEL@h
-	ori	r4,r4,MSR_KERNEL@l
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	rfi			/* enable MMU and jump to start_kernel */
-	b	.		/* prevent prefetch past rfi */
-
-/* Set up the initial MMU state so we can do the first level of
- * kernel initialization.  This maps the first 16 MBytes of memory 1:1
- * virtual to physical and more importantly sets the cache mode.
- */
-initial_mmu:
-	tlbia			/* Invalidate all TLB entries */
-	isync
-
-	/* We should still be executing code at physical address 0x0000xxxx
-	 * at this point. However, start_here is at virtual address
-	 * 0xC000xxxx. So, set up a TLB mapping to cover this once
-	 * translation is enabled.
-	 */
-
-	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
-	ori	r3,r3,KERNELBASE@l
-	tophys(r4,r3)			/* Load the kernel physical address */
-
-	iccci	r0,r3			/* Invalidate the i-cache before use */
-
-	/* Load the kernel PID.
-	*/
-	li	r0,0
-	mtspr	SPRN_PID,r0
-	sync
-
-	/* Configure and load two entries into TLB slots 62 and 63.
-	 * In case we are pinning TLBs, these are reserved in by the
-	 * other TLB functions.  If not reserving, then it doesn't
-	 * matter where they are loaded.
-	 */
-	clrrwi	r4,r4,10		/* Mask off the real page number */
-	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
-
-	clrrwi	r3,r3,10		/* Mask off the effective page number */
-	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
-
-        li      r0,63                    /* TLB slot 63 */
-
-	tlbwe	r4,r0,TLB_DATA		/* Load the data portion of the entry */
-	tlbwe	r3,r0,TLB_TAG		/* Load the tag portion of the entry */
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
-
-	/* Load a TLB entry for the UART, so that ppc4xx_progress() can use
-	 * the UARTs nice and early.  We use a 4k real==virtual mapping. */
-
-	lis	r3,SERIAL_DEBUG_IO_BASE@h
-	ori	r3,r3,SERIAL_DEBUG_IO_BASE@l
-	mr	r4,r3
-	clrrwi	r4,r4,12
-	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
-
-	clrrwi	r3,r3,12
-	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
-
-	li	r0,0			/* TLB slot 0 */
-	tlbwe	r4,r0,TLB_DATA
-	tlbwe	r3,r0,TLB_TAG
-#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
-
-	isync
-
-	/* Establish the exception vector base
-	*/
-	lis	r4,KERNELBASE@h		/* EVPR only uses the high 16-bits */
-	tophys(r0,r4)			/* Use the physical address */
-	mtspr	SPRN_EVPR,r0
-
-	blr
-
-_GLOBAL(abort)
-        mfspr   r13,SPRN_DBCR0
-        oris    r13,r13,DBCR0_RST_SYSTEM@h
-        mtspr   SPRN_DBCR0,r13
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is the second parameter.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-	sync
-	mtspr	SPRN_PID,r3
-	isync				/* Need an isync to flush shadow */
-					/* TLBs after changing PID */
-	blr
-
-/* We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
-	.data
-	.align	12
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-
-/* Stack for handling critical exceptions from kernel mode */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	4096
-critical_stack_top:
-	.globl	exception_stack_top
-exception_stack_top:
-
-/* This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/* Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
deleted file mode 100644
index 321bda2de2cb..000000000000
--- a/arch/ppc/kernel/head_8xx.S
+++ /dev/null
@@ -1,959 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *  MPC8xx modifications by Dan Malek
- *    Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- *
- *  This file contains low-level support and setup for PowerPC 8xx
- *  embedded processors, including trap and interrupt dispatch.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* Macro to make the code more readable. */
-#ifdef CONFIG_8xx_CPU6
-#define DO_8xx_CPU6(val, reg)	\
-	li	reg, val;	\
-	stw	reg, 12(r0);	\
-	lwz	reg, 12(r0);
-#else
-#define DO_8xx_CPU6(val, reg)
-#endif
-	.text
-	.globl	_stext
-_stext:
-	.text
-	.globl	_start
-_start:
-
-/* MPC8xx
- * This port was done on an MBX board with an 860.  Right now I only
- * support an ELF compressed (zImage) boot from EPPC-Bug because the
- * code there loads up some registers before calling us:
- *   r3: ptr to board info data
- *   r4: initrd_start or if no initrd then 0
- *   r5: initrd_end - unused if r4 is 0
- *   r6: Start of command line string
- *   r7: End of command line string
- *
- * I decided to use conditional compilation instead of checking PVR and
- * adding more processor specific branches around code I don't need.
- * Since this is an embedded processor, I also appreciate any memory
- * savings I can get.
- *
- * The MPC8xx does not have any BATs, but it supports large page sizes.
- * We first initialize the MMU to support 8M byte pages, then load one
- * entry into each of the instruction and data TLBs to map the first
- * 8M 1:1.  I also mapped an additional I/O space 1:1 so we can get to
- * the "internal" processor registers before MMU_init is called.
- *
- * The TLB code currently contains a major hack.  Since I use the condition
- * code register, I have to save and restore it.  I am out of registers, so
- * I just store it in memory location 0 (the TLB handlers are not reentrant).
- * To avoid making any decisions, I need to use the "segment" valid bit
- * in the first level table, but that would require many changes to the
- * Linux page directory/table functions that I don't want to do right now.
- *
- * I used to use SPRG2 for a temporary register in the TLB handler, but it
- * has since been put to other uses.  I now use a hack to save a register
- * and the CCR at memory location 0.....Someday I'll fix this.....
- *	-- Dan
- */
-	.globl	__start
-__start:
-	mr	r31,r3			/* save parameters */
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-
-	/* We have to turn on the MMU right away so we get cache modes
-	 * set correctly.
-	 */
-	bl	initial_mmu
-
-/* We now have the lower 8 Meg mapped into TLB entries, and the caches
- * ready to work.
- */
-
-turn_on_mmu:
-	mfmsr	r0
-	ori	r0,r0,MSR_DR|MSR_IR
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	rfi				/* enables MMU */
-
-/*
- * Exception entry code.  This code runs with address translation
- * turned off, i.e. using physical addresses.
- * We assume sprg3 has the physical address of the current
- * task's thread_struct.
- */
-#define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
-	mfcr	r10;		\
-	EXCEPTION_PROLOG_1;	\
-	EXCEPTION_PROLOG_2
-
-#define EXCEPTION_PROLOG_1	\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
-	andi.	r11,r11,MSR_PR;	\
-	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
-	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
-	lwz	r11,THREAD_INFO-THREAD(r11);	\
-	addi	r11,r11,THREAD_SIZE;	\
-	tophys(r11,r11);	\
-1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
-
-
-#define EXCEPTION_PROLOG_2	\
-	CLR_TOP32(r11);		\
-	stw	r10,_CCR(r11);		/* save registers */ \
-	stw	r12,GPR12(r11);	\
-	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
-	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
-	stw	r12,GPR11(r11);	\
-	mflr	r10;		\
-	stw	r10,_LINK(r11);	\
-	mfspr	r12,SPRN_SRR0;	\
-	mfspr	r9,SPRN_SRR1;	\
-	stw	r1,GPR1(r11);	\
-	stw	r1,0(r11);	\
-	tovirt(r1,r11);			/* set new kernel sp */	\
-	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
-	MTMSRD(r10);			/* (except for mach check in rtas) */ \
-	stw	r0,GPR0(r11);	\
-	SAVE_4GPRS(3, r11);	\
-	SAVE_2GPRS(7, r11)
-
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r11, r12 (SRR0), and r9 (SRR1).
- *
- * Note2: once we have set r1 we are in a position to take exceptions
- * again, and we could thus set MSR:RI at that point.
- */
-
-/*
- * Exception vectors.
- */
-#define EXCEPTION(n, label, hdlr, xfer)		\
-	. = n;					\
-label:						\
-	EXCEPTION_PROLOG;			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
-	xfer(n, hdlr)
-
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	li	r10,MSR_KERNEL;					\
-	copyee(r10, r9);					\
-	bl	tfer;						\
-i##n:								\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-/* System reset */
-	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
-
-/* Machine check */
-	. = 0x200
-MachineCheck:
-	EXCEPTION_PROLOG
-	mfspr r4,SPRN_DAR
-	stw r4,_DAR(r11)
-	mfspr r5,SPRN_DSISR
-	stw r5,_DSISR(r11)
-	addi r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x200, machine_check_exception)
-
-/* Data access exception.
- * This is "never generated" by the MPC8xx.  We jump to it for other
- * translation errors.
- */
-	. = 0x300
-DataAccess:
-	EXCEPTION_PROLOG
-	mfspr	r10,SPRN_DSISR
-	stw	r10,_DSISR(r11)
-	mr	r5,r10
-	mfspr	r4,SPRN_DAR
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Instruction access exception.
- * This is "never generated" by the MPC8xx.  We jump to it for other
- * translation errors.
- */
-	. = 0x400
-InstructionAccess:
-	EXCEPTION_PROLOG
-	mr	r4,r12
-	mr	r5,r9
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* External interrupt */
-	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* Alignment exception */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DAR
-	stw	r4,_DAR(r11)
-	mfspr	r5,SPRN_DSISR
-	stw	r5,_DSISR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* Program check exception */
-	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
-
-/* No FPU on MPC8xx.  This exception is not supposed to happen.
-*/
-	EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
-
-/* Decrementer */
-	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
-
-	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
-
-/* System call */
-	. = 0xc00
-SystemCall:
-	EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-/* Single step - not used on 601 */
-	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
-
-/* On the MPC8xx, this is a software emulation interrupt.  It occurs
- * for all unimplemented and illegal instructions.
- */
-	EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD)
-
-	. = 0x1100
-/*
- * For the MPC8xx, this is a software tablewalk to load the instruction
- * TLB.  It is modelled after the example in the Motorola manual.  The task
- * switch loads the M_TWB register with the pointer to the first level table.
- * If we discover there is no second level table (value is zero) or if there
- * is an invalid pte, we load that into the TLB, which causes another fault
- * into the TLB Error interrupt where we can handle such problems.
- * We have to use the MD_xxx registers for the tablewalk because the
- * equivalent MI_xxx registers only perform the attribute functions.
- */
-InstructionTLBMiss:
-#ifdef CONFIG_8xx_CPU6
-	stw	r3, 8(r0)
-#endif
-	DO_8xx_CPU6(0x3f80, r3)
-	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
-	mfcr	r10
-	stw	r10, 0(r0)
-	stw	r11, 4(r0)
-	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r10	/* Have to use MD_EPN for walk, MI_EPN can't */
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800	/* Address >= 0x80000000 */
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load the MI_TWC with the attributes
-	 * for this "segment."
-	 */
-	ori	r11,r11,1		/* Set valid bit */
-	DO_8xx_CPU6(0x2b80, r3)
-	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
-	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
-	lwz	r10, 0(r11)	/* Get the pte */
-
-#ifdef CONFIG_SWAP
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
-	stw	r10, 0(r11)
-4:
-#else
-	ori	r10, r10, _PAGE_ACCESSED
-	stw	r10, 0(r11)
-#endif
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-2:	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x2d80, r3)
-	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	rfi
-
-	. = 0x1200
-DataStoreTLBMiss:
-	stw	r3, 8(r0)
-	DO_8xx_CPU6(0x3f80, r3)
-	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
-	mfcr	r10
-	stw	r10, 0(r0)
-	stw	r11, 4(r0)
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-	stw	r12, 16(r0)
-	b LoadLargeDTLB
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load fetch the pte from the table.
-	 */
-	ori	r11, r11, 1	/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
-	mfspr	r10, SPRN_MD_TWC	/* ....and get the pte address */
-	lwz	r10, 0(r10)	/* Get the pte */
-
-	/* Insert the Guarded flag into the TWC from the Linux PTE.
-	 * It is bit 27 of both the Linux PTE and the TWC (at least
-	 * I got that right :-).  It will be better when we can put
-	 * this into the Linux pgd/pmd and load it in the operation
-	 * above.
-	 */
-	rlwimi	r11, r10, 0, 27, 27
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11
-
-#ifdef CONFIG_SWAP
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-4:
-	/* and update pte in table */
-#else
-	ori	r10, r10, _PAGE_ACCESSED
-#endif
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
-	stw	r10, 0(r11)
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-2:	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-	lwz	r3, 8(r0)
-	rfi
-
-/* This is an instruction TLB error on the MPC8xx.  This could be due
- * to many reasons, such as executing guarded memory or illegal instruction
- * addresses.  There is nothing to do but handle a big time error fault.
- */
-	. = 0x1300
-InstructionTLBError:
-	b	InstructionAccess
-
-LoadLargeDTLB:
-	li	r12, 0
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	3f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load fetch the pte from the table.
-	 */
-	ori	r11, r11, 1	/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
-	mfspr	r10, SPRN_MD_TWC	/* ....and get the pte address */
-	lwz	r10, 0(r10)	/* Get the pte */
-
-	/* Insert the Guarded flag into the TWC from the Linux PTE.
-	 * It is bit 27 of both the Linux PTE and the TWC (at least
-	 * I got that right :-).  It will be better when we can put
-	 * this into the Linux pgd/pmd and load it in the operation
-	 * above.
-	 */
-	rlwimi	r11, r10, 0, 27, 27
-
-	rlwimi  r12, r10, 0, 0, 9	/* extract phys. addr */
-	mfspr	r3, SPRN_MD_EPN
-	rlwinm	r3, r3, 0, 0, 9		/* extract virtual address */
-	tophys(r3, r3)
-	cmpw	r3, r12			/* only use 8M page if it is a direct 
-					   kernel mapping */
-	bne	1f
-	ori     r11, r11, MD_PS8MEG
-	li	r12, 1
-	b	2f
-1:
-	li	r12, 0		/* can't use 8MB TLB, so zero r12. */
-2:
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-3:	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	cmpwi   r12, 1
-	bne 4f
-	ori     r10, r10, 0x8
-
-	mfspr	r12, SPRN_MD_EPN
-	lis	r3, 0xff80		/* 10-19 must be clear for 8MB TLB */
-	ori	r3, r3, 0x0fff
-	and	r12, r3, r12
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r12
-
-	lis	r3, 0xff80		/* 10-19 must be clear for 8MB TLB */
-	ori	r3, r3, 0x0fff
-	and	r10, r3, r10
-4:
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-
-	lwz	r12, 16(r0)
-	lwz	r3, 8(r0)
-	rfi
-
-/* This is the data TLB error on the MPC8xx.  This could be due to
- * many reasons, including a dirty update to a pte.  We can catch that
- * one here, but anything else is an error.  First, we track down the
- * Linux pte.  If it is valid, write access is allowed, but the
- * page dirty bit is not set, we will set it and reload the TLB.  For
- * any other case, we bail out to a higher level function that can
- * handle it.
- */
-	. = 0x1400
-DataTLBError:
-#ifdef CONFIG_8xx_CPU6
-	stw	r3, 8(r0)
-#endif
-	DO_8xx_CPU6(0x3f80, r3)
-	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
-	mfcr	r10
-	stw	r10, 0(r0)
-	stw	r11, 4(r0)
-
-	/* First, make sure this was a store operation.
-	*/
-	mfspr	r10, SPRN_DSISR
-	andis.	r11, r10, 0x0200	/* If set, indicates store op */
-	beq	2f
-
-	/* The EA of a data TLB miss is automatically stored in the MD_EPN
-	 * register.  The EA of a data TLB error is automatically stored in
-	 * the DAR, but not the MD_EPN register.  We must copy the 20 most
-	 * significant bits of the EA from the DAR to MD_EPN before we
-	 * start walking the page tables.  We also need to copy the CASID
-	 * value from the M_CASID register.
-	 * Addendum:  The EA of a data TLB error is _supposed_ to be stored
-	 * in DAR, but it seems that this doesn't happen in some cases, such
-	 * as when the error is due to a dcbi instruction to a page with a
-	 * TLB that doesn't have the changed bit set.  In such cases, there
-	 * does not appear to be any way  to recover the EA of the error
-	 * since it is neither in DAR nor MD_EPN.  As a workaround, the
-	 * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
-	 * are initialized in mapin_ram().  This will avoid the problem,
-	 * assuming we only use the dcbi instruction on kernel addresses.
-	 */
-	mfspr	r10, SPRN_DAR
-	rlwinm	r11, r10, 0, 0, 19
-	ori	r11, r11, MD_EVALID
-	mfspr	r10, SPRN_M_CASID
-	rlwimi	r11, r10, 0, 28, 31
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r11
-
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, bail */
-
-	/* We have a pte table, so fetch the pte from the table.
-	 */
-	ori	r11, r11, 1		/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11		/* Load pte table base address */
-	mfspr	r11, SPRN_MD_TWC		/* ....and get the pte address */
-	lwz	r10, 0(r11)		/* Get the pte */
-
-	andi.	r11, r10, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail out if not */
-
-	/* Update 'changed', among others.
-	*/
-#ifdef CONFIG_SWAP
-	ori	r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-4:
-#else
-	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-#endif
-	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
-	stw	r10, 0(r11)		/* and update pte in table */
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	rfi
-2:
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	b	DataAccess
-
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
-
-/* On the MPC8xx, these next four traps are used for development
- * support of breakpoints and such.  Someday I will get around to
- * using them.
- */
-	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
-
-	. = 0x2000
-
-	.globl	giveup_fpu
-giveup_fpu:
-	blr
-
-/*
- * This is where the main kernel code starts.
- */
-start_here:
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init	/* We have to do this with MMU on */
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/*
- * Go back to running unmapped so we can load up new values
- * and change to using our exception vectors.
- * On the 8xx, all we have to do is invalidate the TLB to clear
- * the old 8M byte TLB mappings and load the page table base register.
- */
-	/* The right way to do this would be to track it down through
-	 * init's THREAD like the context switch code does, but this is
-	 * easier......until someone changes init's static structures.
-	 */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	tophys(r6,r6)
-#ifdef CONFIG_8xx_CPU6
-	lis	r4, cpu6_errata_word@h
-	ori	r4, r4, cpu6_errata_word@l
-	li	r3, 0x3980
-	stw	r3, 12(r4)
-	lwz	r3, 12(r4)
-#endif
-	mtspr	SPRN_M_TWB, r6
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi
-/* Load up the kernel context */
-2:
-	SYNC			/* Force all PTE updates to finish */
-	tlbia			/* Clear all TLB entries */
-	sync			/* wait for tlbia/tlbie to finish */
-	TLBSYNC			/* ... on all CPUs */
-
-	/* set up the PTE pointers for the Abatron bdiGDB.
-	*/
-	tovirt(r6,r6)
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
-	tophys(r5,r5)
-	stw	r6, 0(r5)
-
-/* Now turn on the MMU for real! */
-	li	r4,MSR_KERNEL
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	rfi			/* enable MMU and jump to start_kernel */
-
-/* Set up the initial MMU state so we can do the first level of
- * kernel initialization.  This maps the first 8 MBytes of memory 1:1
- * virtual to physical.  Also, set the cache mode since that is defined
- * by TLB entries and perform any additional mapping (like of the IMMR).
- * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
- * 24 Mbytes of data, and the 8M IMMR space.  Anything not covered by
- * these mappings is mapped by page tables.
- */
-initial_mmu:
-	tlbia			/* Invalidate all TLB entries */
-#ifdef CONFIG_PIN_TLB
-	lis	r8, MI_RSV4I@h
-	ori	r8, r8, 0x1c00
-#else
-	li	r8, 0
-#endif
-	mtspr	SPRN_MI_CTR, r8	/* Set instruction MMU control */
-
-#ifdef CONFIG_PIN_TLB
-	lis	r10, (MD_RSV4I | MD_RESETVAL)@h
-	ori	r10, r10, 0x1c00
-	mr	r8, r10
-#else
-	lis	r10, MD_RESETVAL@h
-#endif
-#ifndef CONFIG_8xx_COPYBACK
-	oris	r10, r10, MD_WTDEF@h
-#endif
-	mtspr	SPRN_MD_CTR, r10	/* Set data TLB control */
-
-	/* Now map the lower 8 Meg into the TLBs.  For this quick hack,
-	 * we can load the instruction and data TLB registers with the
-	 * same values.
-	 */
-	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
-	ori	r8, r8, MI_EVALID	/* Mark it valid */
-	mtspr	SPRN_MI_EPN, r8
-	mtspr	SPRN_MD_EPN, r8
-	li	r8, MI_PS8MEG		/* Set 8M byte page */
-	ori	r8, r8, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MI_TWC, r8
-	mtspr	SPRN_MD_TWC, r8
-	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
-	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
-	mtspr	SPRN_MD_RPN, r8
-	lis	r8, MI_Kp@h		/* Set the protection mode */
-	mtspr	SPRN_MI_AP, r8
-	mtspr	SPRN_MD_AP, r8
-
-	/* Map another 8 MByte at the IMMR to get the processor
-	 * internal registers (among other things).
-	 */
-#ifdef CONFIG_PIN_TLB
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-#endif
-	mfspr	r9, 638			/* Get current IMMR */
-	andis.	r9, r9, 0xff80		/* Get 8Mbyte boundary */
-
-	mr	r8, r9			/* Create vaddr for TLB */
-	ori	r8, r8, MD_EVALID	/* Mark it valid */
-	mtspr	SPRN_MD_EPN, r8
-	li	r8, MD_PS8MEG		/* Set 8M byte page */
-	ori	r8, r8, MD_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r8
-	mr	r8, r9			/* Create paddr for TLB */
-	ori	r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
-	mtspr	SPRN_MD_RPN, r8
-
-#ifdef CONFIG_PIN_TLB
-	/* Map two more 8M kernel data pages.
-	*/
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
-	addis	r8, r8, 0x0080		/* Add 8M */
-	ori	r8, r8, MI_EVALID	/* Mark it valid */
-	mtspr	SPRN_MD_EPN, r8
-	li	r9, MI_PS8MEG		/* Set 8M byte page */
-	ori	r9, r9, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r9
-	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
-
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	addis	r8, r8, 0x0080		/* Add 8M */
-	mtspr	SPRN_MD_EPN, r8
-	mtspr	SPRN_MD_TWC, r9
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
-#endif
-
-	/* Since the cache is enabled according to the information we
-	 * just loaded into the TLB, invalidate and enable the caches here.
-	 * We should probably check/set other modes....later.
-	 */
-	lis	r8, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r8
-	mtspr	SPRN_DC_CST, r8
-	lis	r8, IDC_ENABLE@h
-	mtspr	SPRN_IC_CST, r8
-#ifdef CONFIG_8xx_COPYBACK
-	mtspr	SPRN_DC_CST, r8
-#else
-	/* For a debug option, I left this here to easily enable
-	 * the write through cache mode
-	 */
-	lis	r8, DC_SFWT@h
-	mtspr	SPRN_DC_CST, r8
-	lis	r8, IDC_ENABLE@h
-	mtspr	SPRN_DC_CST, r8
-#endif
-	blr
-
-
-/*
- * Set up to use a given MMU context.
- * r3 is context number, r4 is PGD pointer.
- *
- * We place the physical address of the new task page directory loaded
- * into the MMU base register, and set the ASID compare register with
- * the new "context."
- */
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is passed as second argument.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-
-#ifdef CONFIG_8xx_CPU6
-	lis	r6, cpu6_errata_word@h
-	ori	r6, r6, cpu6_errata_word@l
-	tophys	(r4, r4)
-	li	r7, 0x3980
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-        mtspr   SPRN_M_TWB, r4               /* Update MMU base address */
-	li	r7, 0x3380
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-        mtspr   SPRN_M_CASID, r3             /* Update context */
-#else
-        mtspr   SPRN_M_CASID,r3		/* Update context */
-	tophys	(r4, r4)
-	mtspr	SPRN_M_TWB, r4		/* and pgd */
-#endif
-	SYNC
-	blr
-
-#ifdef CONFIG_8xx_CPU6
-/* It's here because it is unique to the 8xx.
- * It is important we get called with interrupts disabled.  I used to
- * do that, but it appears that all code that calls this already had
- * interrupt disabled.
- */
-	.globl	set_dec_cpu6
-set_dec_cpu6:
-	lis	r7, cpu6_errata_word@h
-	ori	r7, r7, cpu6_errata_word@l
-	li	r4, 0x2c00
-	stw	r4, 8(r7)
-	lwz	r4, 8(r7)
-        mtspr   22, r3		/* Update Decrementer */
-	SYNC
-	blr
-#endif
-
-/*
- * We put a few things here that have to be page-aligned.
- * This stuff goes at the beginning of the data segment,
- * which is page-aligned.
- */
-	.data
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * Used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/* Room for two PTE table poiners, usually the kernel and current user
- * pointer to their respective root page table (pgdir).
- */
-abatron_pteptrs:
-	.space	8
-
-#ifdef CONFIG_8xx_CPU6
-	.globl	cpu6_errata_word
-cpu6_errata_word:
-	.space	16
-#endif
-
diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h
deleted file mode 100644
index 166d597b6db2..000000000000
--- a/arch/ppc/kernel/head_booke.h
+++ /dev/null
@@ -1,308 +0,0 @@
-#ifndef __HEAD_BOOKE_H__
-#define __HEAD_BOOKE_H__
-
-/*
- * Macros used for common Book-e exception handling
- */
-
-#define SET_IVOR(vector_number, vector_label)		\
-		li	r26,vector_label@l; 		\
-		mtspr	SPRN_IVOR##vector_number,r26;	\
-		sync
-
-#define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG4W,r1;						     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
-	addi	r1,r1,THREAD_SIZE;					     \
-1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	mr	r11,r1;							     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
-	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
-	stw	r12,GPR11(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG4R;					     \
-	mfspr	r12,SPRN_SRR0;						     \
-	stw	r10,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR1;						     \
-	stw	r10,0(r11);						     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-/* To handle the additional exception priority levels on 40x and Book-E
- * processors we allocate a 4k stack per additional priority level. The various
- * head_xxx.S files allocate space (exception_stack_top) for each priority's
- * stack times the number of CPUs
- *
- * On 40x critical is the only additional level
- * On 44x/e500 we have critical and machine check
- * On e200 we have critical and debug (machine check occurs via critical)
- *
- * Additionally we reserve a SPRG for each priority level so we can free up a
- * GPR to use as the base for indirect access to the exception stacks.  This
- * is necessary since the MMU is always on, for Book-E parts, and the stacks
- * are offset from KERNELBASE.
- *
- */
-#define BOOKE_EXCEPTION_STACK_SIZE	(8192)
-
-/* CRIT_SPRG only used in critical exception handling */
-#define CRIT_SPRG	SPRN_SPRG2
-/* MCHECK_SPRG only used in machine check exception handling */
-#define MCHECK_SPRG	SPRN_SPRG6W
-
-#define MCHECK_STACK_TOP	(exception_stack_top - 4096)
-#define CRIT_STACK_TOP		(exception_stack_top)
-
-/* only on e200 for now */
-#define DEBUG_STACK_TOP		(exception_stack_top - 4096)
-#define DEBUG_SPRG		SPRN_SPRG6W
-
-#ifdef CONFIG_SMP
-#define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
-	mfspr	r8,SPRN_PIR;				\
-	mulli	r8,r8,BOOKE_EXCEPTION_STACK_SIZE;	\
-	neg	r8,r8;					\
-	addis	r8,r8,level##_STACK_TOP@ha;		\
-	addi	r8,r8,level##_STACK_TOP@l
-#else
-#define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
-	lis	r8,level##_STACK_TOP@h;			\
-	ori	r8,r8,level##_STACK_TOP@l
-#endif
-
-/*
- * Exception prolog for critical/machine check exceptions.  This is a
- * little different from the normal exception prolog above since a
- * critical/machine check exception can potentially occur at any point
- * during normal exception processing. Thus we cannot use the same SPRG
- * registers as the normal prolog above. Instead we use a portion of the
- * critical/machine check exception stack at low physical addresses.
- */
-#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
-	mtspr	exc_level##_SPRG,r8;					     \
-	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
-	stw	r10,GPR10-INT_FRAME_SIZE(r8);				     \
-	stw	r11,GPR11-INT_FRAME_SIZE(r8);				     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,exc_level_srr1;	/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	mr	r11,r8;							     \
-	mfspr	r8,exc_level##_SPRG;					     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
-	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
-	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
-	stw	r9,_ESR(r11);		/* exception was taken		   */\
-	mfspr	r12,exc_level_srr0;					     \
-	stw	r1,GPR1(r11);						     \
-	mfspr	r9,exc_level_srr1;					     \
-	stw	r1,0(r11);						     \
-	mr	r1,r11;							     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-#define CRITICAL_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
-#define DEBUG_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
-#define MCHECK_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
-
-/*
- * Exception vectors.
- */
-#define	START_EXCEPTION(label)						     \
-        .align 5;              						     \
-label:
-
-#define FINISH_EXCEPTION(func)					\
-	bl	transfer_to_handler_full;			\
-	.long	func;						\
-	.long	ret_from_except_full
-
-#define EXCEPTION(n, label, hdlr, xfer)				\
-	START_EXCEPTION(label);					\
-	NORMAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(label);					\
-	CRITICAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, crit_transfer_to_handler, \
-			  ret_from_crit_exc)
-
-#define MCHECK_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(label);					\
-	MCHECK_EXCEPTION_PROLOG;				\
-	mfspr	r5,SPRN_ESR;					\
-	stw	r5,_ESR(r11);					\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, mcheck_transfer_to_handler,   \
-			  ret_from_mcheck_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	lis	r10,msr@h;					\
-	ori	r10,r10,msr@l;					\
-	copyee(r10, r9);					\
-	bl	tfer;		 				\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved.  This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_CSRR1, which will still have
- * the MSR_DE bit set.
- */
-#define DEBUG_EXCEPTION							      \
-	START_EXCEPTION(Debug);						      \
-	CRITICAL_EXCEPTION_PROLOG;					      \
-									      \
-	/*								      \
-	 * If there is a single step or branch-taken exception in an	      \
-	 * exception entry sequence, it was probably meant to apply to	      \
-	 * the code where the exception occurred (since exception entry	      \
-	 * doesn't turn off DE automatically).  We simulate the effect	      \
-	 * of turning off DE on entry to an exception handler by turning      \
-	 * off DE in the CSRR1 value and clearing the debug status.	      \
-	 */								      \
-	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
-	andis.	r10,r10,DBSR_IC@h;					      \
-	beq+	2f;							      \
-									      \
-	lis	r10,KERNELBASE@h;	/* check if exception in vectors */   \
-	ori	r10,r10,KERNELBASE@l;					      \
-	cmplw	r12,r10;						      \
-	blt+	2f;			/* addr below exception vectors */    \
-									      \
-	lis	r10,Debug@h;						      \
-	ori	r10,r10,Debug@l;					      \
-	cmplw	r12,r10;						      \
-	bgt+	2f;			/* addr above exception vectors */    \
-									      \
-	/* here it looks like we got an inappropriate debug exception. */     \
-1:	rlwinm	r9,r9,0,~MSR_DE;	/* clear DE in the CSRR1 value */     \
-	lis	r10,DBSR_IC@h;		/* clear the IC event */	      \
-	mtspr	SPRN_DBSR,r10;						      \
-	/* restore state and get out */					      \
-	lwz	r10,_CCR(r11);						      \
-	lwz	r0,GPR0(r11);						      \
-	lwz	r1,GPR1(r11);						      \
-	mtcrf	0x80,r10;						      \
-	mtspr	SPRN_CSRR0,r12;						      \
-	mtspr	SPRN_CSRR1,r9;						      \
-	lwz	r9,GPR9(r11);						      \
-	lwz	r12,GPR12(r11);						      \
-	mtspr	CRIT_SPRG,r8;						      \
-	BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
-	mfspr	r8,CRIT_SPRG;						      \
-									      \
-	rfci;								      \
-	b	.;							      \
-									      \
-	/* continue normal handling for a critical exception... */	      \
-2:	mfspr	r4,SPRN_DBSR;						      \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
-#define INSTRUCTION_STORAGE_EXCEPTION					      \
-	START_EXCEPTION(InstructionStorage)				      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	mfspr	r5,SPRN_ESR;		/* Grab the ESR and save it */	      \
-	stw	r5,_ESR(r11);						      \
-	mr      r4,r12;                 /* Pass SRR0 as arg2 */		      \
-	li      r5,0;                   /* Pass zero as arg3 */		      \
-	EXC_XFER_EE_LITE(0x0400, handle_page_fault)
-
-#define ALIGNMENT_EXCEPTION						      \
-	START_EXCEPTION(Alignment)					      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	mfspr   r4,SPRN_DEAR;           /* Grab the DEAR and save it */	      \
-	stw     r4,_DEAR(r11);						      \
-	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE(0x0600, alignment_exception)
-
-#define PROGRAM_EXCEPTION						      \
-	START_EXCEPTION(Program)					      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	mfspr	r4,SPRN_ESR;		/* Grab the ESR and save it */	      \
-	stw	r4,_ESR(r11);						      \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_STD(0x0700, program_check_exception)
-
-#define DECREMENTER_EXCEPTION						      \
-	START_EXCEPTION(Decrementer)					      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	lis     r0,TSR_DIS@h;           /* Setup the DEC interrupt mask */    \
-	mtspr   SPRN_TSR,r0;		/* Clear the DEC interrupt */	      \
-	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_LITE(0x0900, timer_interrupt)
-
-#define FP_UNAVAILABLE_EXCEPTION					      \
-	START_EXCEPTION(FloatingPointUnavailable)			      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	bne	load_up_fpu;		/* if from user, just load it up */   \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
-
-#endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c
deleted file mode 100644
index a469ba438cbe..000000000000
--- a/arch/ppc/kernel/machine_kexec.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * machine_kexec.c - handle transition of Linux booting another kernel
- * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
- *
- * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2.  See the file COPYING for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/cacheflush.h>
-#include <asm/machdep.h>
-
-typedef NORET_TYPE void (*relocate_new_kernel_t)(
-				unsigned long indirection_page,
-				unsigned long reboot_code_buffer,
-				unsigned long start_address) ATTRIB_NORET;
-
-extern const unsigned char relocate_new_kernel[];
-extern const unsigned int relocate_new_kernel_size;
-
-void machine_shutdown(void)
-{
-	if (ppc_md.machine_shutdown)
-		ppc_md.machine_shutdown();
-}
-
-void machine_crash_shutdown(struct pt_regs *regs)
-{
-	if (ppc_md.machine_crash_shutdown)
-		ppc_md.machine_crash_shutdown();
-}
-
-/*
- * Do what every setup is needed on image and the
- * reboot code buffer to allow us to avoid allocations
- * later.
- */
-int machine_kexec_prepare(struct kimage *image)
-{
-	if (ppc_md.machine_kexec_prepare)
-		return ppc_md.machine_kexec_prepare(image);
-	/*
-	 * Fail if platform doesn't provide its own machine_kexec_prepare
-	 * implementation.
-	 */
-	return -ENOSYS;
-}
-
-void machine_kexec_cleanup(struct kimage *image)
-{
-	if (ppc_md.machine_kexec_cleanup)
-		ppc_md.machine_kexec_cleanup(image);
-}
-
-/*
- * Do not allocate memory (or fail in any way) in machine_kexec().
- * We are past the point of no return, committed to rebooting now.
- */
-NORET_TYPE void machine_kexec(struct kimage *image)
-{
-	if (ppc_md.machine_kexec)
-		ppc_md.machine_kexec(image);
-	else {
-		/*
-		 * Fall back to normal restart if platform doesn't provide
-		 * its own kexec function, and user insist to kexec...
-		 */
-		machine_restart(NULL);
-	}
-	for(;;);
-}
-
-/*
- * This is a generic machine_kexec function suitable at least for
- * non-OpenFirmware embedded platforms.
- * It merely copies the image relocation code to the control page and
- * jumps to it.
- * A platform specific function may just call this one.
- */
-void machine_kexec_simple(struct kimage *image)
-{
-	unsigned long page_list;
-	unsigned long reboot_code_buffer, reboot_code_buffer_phys;
-	relocate_new_kernel_t rnk;
-
-	/* Interrupts aren't acceptable while we reboot */
-	local_irq_disable();
-
-	page_list = image->head;
-
-	/* we need both effective and real address here */
-	reboot_code_buffer =
-			(unsigned long)page_address(image->control_code_page);
-	reboot_code_buffer_phys = virt_to_phys((void *)reboot_code_buffer);
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy((void *)reboot_code_buffer, relocate_new_kernel,
-						relocate_new_kernel_size);
-
-	flush_icache_range(reboot_code_buffer,
-				reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
-	printk(KERN_INFO "Bye!\n");
-
-	/* now call it */
-	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer_phys, image->start);
-}
-
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
deleted file mode 100644
index d5e0dfc9ffec..000000000000
--- a/arch/ppc/kernel/misc.S
+++ /dev/null
@@ -1,868 +0,0 @@
-/*
- * This file contains miscellaneous low-level functions.
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/sys.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-#include <asm/cputable.h>
-#include <asm/mmu.h>
-#include <asm/ppc_asm.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_8xx
-#define ISYNC_8xx isync
-#else
-#define ISYNC_8xx
-#endif
-	.text
-
-	.align	5
-_GLOBAL(__delay)
-	cmpwi	0,r3,0
-	mtctr	r3
-	beqlr
-1:	bdnz	1b
-	blr
-
-/*
- * Returns (address we're running at) - (address we were linked at)
- * for use before the text and data are mapped to KERNELBASE.
- */
-_GLOBAL(reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r3
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r3,r4,r3
-	mtlr	r0
-	blr
-
-/*
- * add_reloc_offset(x) returns x + reloc_offset().
- */
-_GLOBAL(add_reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r5
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r5,r4,r5
-	add	r3,r3,r5
-	mtlr	r0
-	blr
-
-/*
- * sub_reloc_offset(x) returns x - reloc_offset().
- */
-_GLOBAL(sub_reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r5
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r5,r4,r5
-	subf	r3,r5,r3
-	mtlr	r0
-	blr
-
-/*
- * reloc_got2 runs through the .got2 section adding an offset
- * to each entry.
- */
-_GLOBAL(reloc_got2)
-	mflr	r11
-	lis	r7,__got2_start@ha
-	addi	r7,r7,__got2_start@l
-	lis	r8,__got2_end@ha
-	addi	r8,r8,__got2_end@l
-	subf	r8,r7,r8
-	srwi.	r8,r8,2
-	beqlr
-	mtctr	r8
-	bl	1f
-1:	mflr	r0
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r0,r4,r0
-	add	r7,r0,r7
-2:	lwz	r0,0(r7)
-	add	r0,r0,r3
-	stw	r0,0(r7)
-	addi	r7,r7,4
-	bdnz	2b
-	mtlr	r11
-	blr
-
-/*
- * call_setup_cpu - call the setup_cpu function for this cpu
- * r3 = data offset, r24 = cpu number
- *
- * Setup function is called with:
- *   r3 = data offset
- *   r4 = ptr to CPU spec (relocated)
- */
-_GLOBAL(call_setup_cpu)
-	addis	r4,r3,cur_cpu_spec@ha
-	addi	r4,r4,cur_cpu_spec@l
-	lwz	r4,0(r4)
-	add	r4,r4,r3
-	lwz	r5,CPU_SPEC_SETUP(r4)
-	cmpi	0,r5,0
-	add	r5,r5,r3
-	beqlr
-	mtctr	r5
-	bctr
-
-/*
- * complement mask on the msr then "or" some values on.
- *     _nmask_and_or_msr(nmask, value_to_or)
- */
-_GLOBAL(_nmask_and_or_msr)
-	mfmsr	r0		/* Get current msr */
-	andc	r0,r0,r3	/* And off the bits set in r3 (first parm) */
-	or	r0,r0,r4	/* Or on the bits in r4 (second parm) */
-	SYNC			/* Some chip revs have problems here... */
-	mtmsr	r0		/* Update machine state */
-	isync
-	blr			/* Done */
-
-
-/*
- * Flush MMU TLB
- */
-_GLOBAL(_tlbia)
-#if defined(CONFIG_40x)
-	sync			/* Flush to memory before changing mapping */
-	tlbia
-	isync			/* Flush shadow TLB */
-#elif defined(CONFIG_44x)
-	li	r3,0
-	sync
-
-	/* Load high watermark */
-	lis	r4,tlb_44x_hwater@ha
-	lwz	r5,tlb_44x_hwater@l(r4)
-
-1:	tlbwe	r3,r3,PPC44x_TLB_PAGEID
-	addi	r3,r3,1
-	cmpw	0,r3,r5
-	ble	1b
-
-	isync
-#else /* !(CONFIG_40x || CONFIG_44x) */
-#if defined(CONFIG_SMP)
-	rlwinm	r8,r1,0,0,18
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,10
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-	lis	r9,mmu_hash_lock@h
-	ori	r9,r9,mmu_hash_lock@l
-	tophys(r9,r9)
-10:	lwarx	r7,0,r9
-	cmpwi	0,r7,0
-	bne-	10b
-	stwcx.	r8,0,r9
-	bne-	10b
-	sync
-	tlbia
-	sync
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-	mtmsr	r10
-	SYNC_601
-	isync
-#else /* CONFIG_SMP */
-	sync
-	tlbia
-	sync
-#endif /* CONFIG_SMP */
-#endif /* ! defined(CONFIG_40x) */
-	blr
-
-/*
- * Flush MMU TLB for a particular address
- */
-_GLOBAL(_tlbie)
-#if defined(CONFIG_40x)
-	/* We run the search with interrupts disabled because we have to change
-	 * the PID and I don't want to preempt when that happens.
-	 */
-	mfmsr	r5
-	mfspr	r6,SPRN_PID
-	wrteei	0
-	mtspr	SPRN_PID,r4
-	tlbsx.	r3, 0, r3
-	mtspr	SPRN_PID,r6
-	wrtee	r5
-	bne	10f
-	sync
-	/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
-	 * Since 25 is the V bit in the TLB_TAG, loading this value will invalidate
-	 * the TLB entry. */
-	tlbwe	r3, r3, TLB_TAG
-	isync
-10:
-#elif defined(CONFIG_44x)
-	mfspr	r5,SPRN_MMUCR
-	rlwimi	r5,r4,0,24,31			/* Set TID */
-
-	/* We have to run the search with interrupts disabled, even critical
-	 * and debug interrupts (in fact the only critical exceptions we have
-	 * are debug and machine check).  Otherwise  an interrupt which causes
-	 * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
-	mfmsr	r4
-	lis	r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
-	addi	r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
-	andc	r6,r4,r6
-	mtmsr	r6
-	mtspr	SPRN_MMUCR,r5
-	tlbsx.	r3, 0, r3
-	mtmsr	r4
-	bne	10f
-	sync
-	/* There are only 64 TLB entries, so r3 < 64,
-	 * which means bit 22, is clear.  Since 22 is
-	 * the V bit in the TLB_PAGEID, loading this
-	 * value will invalidate the TLB entry.
-	 */
-	tlbwe	r3, r3, PPC44x_TLB_PAGEID
-	isync
-10:
-#else /* !(CONFIG_40x || CONFIG_44x) */
-#if defined(CONFIG_SMP)
-	rlwinm	r8,r1,0,0,18
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,11
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-	lis	r9,mmu_hash_lock@h
-	ori	r9,r9,mmu_hash_lock@l
-	tophys(r9,r9)
-10:	lwarx	r7,0,r9
-	cmpwi	0,r7,0
-	bne-	10b
-	stwcx.	r8,0,r9
-	bne-	10b
-	eieio
-	tlbie	r3
-	sync
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-	mtmsr	r10
-	SYNC_601
-	isync
-#else /* CONFIG_SMP */
-	tlbie	r3
-	sync
-#endif /* CONFIG_SMP */
-#endif /* ! CONFIG_40x */
-	blr
-
-/*
- * Flush instruction cache.
- * This is a no-op on the 601.
- */
-_GLOBAL(flush_instruction_cache)
-#if defined(CONFIG_8xx)
-	isync
-	lis	r5, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r5
-#elif defined(CONFIG_4xx)
-#ifdef CONFIG_403GCX
-	li      r3, 512
-	mtctr   r3
-	lis     r4, KERNELBASE@h
-1:	iccci   0, r4
-	addi    r4, r4, 16
-	bdnz    1b
-#else
-	lis	r3, KERNELBASE@h
-	iccci	0,r3
-#endif
-#else
-	mfspr	r3,SPRN_PVR
-	rlwinm	r3,r3,16,16,31
-	cmpwi	0,r3,1
-	beqlr			/* for 601, do nothing */
-	/* 603/604 processor - use invalidate-all bit in HID0 */
-	mfspr	r3,SPRN_HID0
-	ori	r3,r3,HID0_ICFI
-	mtspr	SPRN_HID0,r3
-#endif /* CONFIG_8xx/4xx */
-	isync
-	blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * __flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(__flush_icache_range)
-BEGIN_FTR_SECTION
-	blr				/* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-	mr	r6,r3
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	mtctr	r4
-2:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	2b
-	sync				/* additional sync needed on g4 */
-	isync
-	blr
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbf	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Like above, but invalidate the D-cache.  This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbi	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbi's to get to ram */
-	blr
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS	64
-#define CACHE_NLINES	16
-
-_GLOBAL(flush_dcache_all)
-	li	r4, (2 * CACHE_NWAYS * CACHE_NLINES)
-	mtctr	r4
-	lis     r5, KERNELBASE@h
-1:	lwz	r3, 0(r5)		/* Load one word from every line */
-	addi	r5, r5, L1_CACHE_BYTES
-	bdnz    1b
-	blr
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- *	void __flush_dcache_icache(void *page)
- */
-_GLOBAL(__flush_dcache_icache)
-BEGIN_FTR_SECTION
-	blr					/* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	rlwinm	r3,r3,0,0,19			/* Get page base address */
-	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
-	mtctr	r4
-	mr	r6,r3
-0:	dcbst	0,r3				/* Write line to ram */
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	0b
-	sync
-#ifndef CONFIG_44x
-	/* We don't flush the icache on 44x. Those have a virtual icache
-	 * and we don't have access to the virtual address here (it's
-	 * not the page vaddr but where it's mapped in user space). The
-	 * flushing of the icache on these is handled elsewhere, when
-	 * a change in the address space occurs, before returning to
-	 * user space
-	 */
-	mtctr	r4
-1:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	1b
-	sync
-	isync
-#endif /* CONFIG_44x */
-	blr
-
-/*
- * Flush a particular page from the data cache to RAM, identified
- * by its physical address.  We turn off the MMU so we can just use
- * the physical address (this may be a highmem page without a kernel
- * mapping).
- *
- *	void __flush_dcache_icache_phys(unsigned long physaddr)
- */
-_GLOBAL(__flush_dcache_icache_phys)
-BEGIN_FTR_SECTION
-	blr					/* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	mfmsr	r10
-	rlwinm	r0,r10,0,28,26			/* clear DR */
-	mtmsr	r0
-	isync
-	rlwinm	r3,r3,0,0,19			/* Get page base address */
-	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
-	mtctr	r4
-	mr	r6,r3
-0:	dcbst	0,r3				/* Write line to ram */
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	0b
-	sync
-	mtctr	r4
-1:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	1b
-	sync
-	mtmsr	r10				/* restore DR */
-	isync
-	blr
-
-/*
- * Clear pages using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced).  This only works on cacheable memory.
- *
- * void clear_pages(void *page, int order) ;
- */
-_GLOBAL(clear_pages)
-	li	r0,4096/L1_CACHE_BYTES
-	slw	r0,r0,r4
-	mtctr	r0
-#ifdef CONFIG_8xx
-	li	r4, 0
-1:	stw	r4, 0(r3)
-	stw	r4, 4(r3)
-	stw	r4, 8(r3)
-	stw	r4, 12(r3)
-#else
-1:	dcbz	0,r3
-#endif
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	blr
-
-/*
- * Copy a whole page.  We use the dcbz instruction on the destination
- * to reduce memory traffic (it eliminates the unnecessary reads of
- * the destination into cache).  This requires that the destination
- * is cacheable.
- */
-#define COPY_16_BYTES		\
-	lwz	r6,4(r4);	\
-	lwz	r7,8(r4);	\
-	lwz	r8,12(r4);	\
-	lwzu	r9,16(r4);	\
-	stw	r6,4(r3);	\
-	stw	r7,8(r3);	\
-	stw	r8,12(r3);	\
-	stwu	r9,16(r3)
-
-_GLOBAL(copy_page)
-	addi	r3,r3,-4
-	addi	r4,r4,-4
-
-#ifdef CONFIG_8xx
-	/* don't use prefetch on 8xx */
-    	li	r0,4096/L1_CACHE_BYTES
-	mtctr	r0
-1:	COPY_16_BYTES
-	bdnz	1b
-	blr
-
-#else	/* not 8xx, we can prefetch */
-	li	r5,4
-
-#if MAX_COPY_PREFETCH > 1
-	li	r0,MAX_COPY_PREFETCH
-	li	r11,4
-	mtctr	r0
-11:	dcbt	r11,r4
-	addi	r11,r11,L1_CACHE_BYTES
-	bdnz	11b
-#else /* MAX_COPY_PREFETCH == 1 */
-	dcbt	r5,r4
-	li	r11,L1_CACHE_BYTES+4
-#endif /* MAX_COPY_PREFETCH */
-	li	r0,4096/L1_CACHE_BYTES - MAX_COPY_PREFETCH
-	crclr	4*cr0+eq
-2:
-	mtctr	r0
-1:
-	dcbt	r11,r4
-	dcbz	r5,r3
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-#endif
-#endif
-#endif
-	bdnz	1b
-	beqlr
-	crnot	4*cr0+eq,4*cr0+eq
-	li	r0,MAX_COPY_PREFETCH
-	li	r11,4
-	b	2b
-#endif	/* CONFIG_8xx */
-
-/*
- * void atomic_clear_mask(atomic_t mask, atomic_t *addr)
- * void atomic_set_mask(atomic_t mask, atomic_t *addr);
- */
-_GLOBAL(atomic_clear_mask)
-10:	lwarx	r5,0,r4
-	andc	r5,r5,r3
-	PPC405_ERR77(0,r4)
-	stwcx.	r5,0,r4
-	bne-	10b
-	blr
-_GLOBAL(atomic_set_mask)
-10:	lwarx	r5,0,r4
-	or	r5,r5,r3
-	PPC405_ERR77(0,r4)
-	stwcx.	r5,0,r4
-	bne-	10b
-	blr
-
-/*
- * I/O string operations
- *
- * insb(port, buf, len)
- * outsb(port, buf, len)
- * insw(port, buf, len)
- * outsw(port, buf, len)
- * insl(port, buf, len)
- * outsl(port, buf, len)
- * insw_ns(port, buf, len)
- * outsw_ns(port, buf, len)
- * insl_ns(port, buf, len)
- * outsl_ns(port, buf, len)
- *
- * The *_ns versions don't do byte-swapping.
- */
-_GLOBAL(_insb)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,1
-	blelr-
-00:	lbz	r5,0(r3)
-01:	eieio
-02:	stbu	r5,1(r4)
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_outsb)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,1
-	blelr-
-00:	lbzu	r5,1(r4)
-01:	stb	r5,0(r3)
-02:	eieio
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_insw_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhz	r5,0(r3)
-01:	eieio
-02:	sthu	r5,2(r4)
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_outsw_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhzu	r5,2(r4)
-01:	sth	r5,0(r3)
-02:	eieio
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_insl_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwz	r5,0(r3)
-01:	eieio
-02:	stwu	r5,4(r4)
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_outsl_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwzu	r5,4(r4)
-01:	stw	r5,0(r3)
-02:	eieio
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-/*
- * Extended precision shifts.
- *
- * Updated to be valid for shift counts from 0 to 63 inclusive.
- * -- Gabriel
- *
- * R3/R4 has 64 bit value
- * R5    has shift count
- * result in R3/R4
- *
- *  ashrdi3: arithmetic right shift (sign propagation)	
- *  lshrdi3: logical right shift
- *  ashldi3: left shift
- */
-_GLOBAL(__ashrdi3)
-	subfic	r6,r5,32
-	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
-	addi	r7,r5,32	# could be xori, or addi with -32
-	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
-	rlwinm	r8,r7,0,32	# t3 = (count < 32) ? 32 : 0
-	sraw	r7,r3,r7	# t2 = MSW >> (count-32)
-	or	r4,r4,r6	# LSW |= t1
-	slw	r7,r7,r8	# t2 = (count < 32) ? 0 : t2
-	sraw	r3,r3,r5	# MSW = MSW >> count
-	or	r4,r4,r7	# LSW |= t2
-	blr
-
-_GLOBAL(__ashldi3)
-	subfic	r6,r5,32
-	slw	r3,r3,r5	# MSW = count > 31 ? 0 : MSW << count
-	addi	r7,r5,32	# could be xori, or addi with -32
-	srw	r6,r4,r6	# t1 = count > 31 ? 0 : LSW >> (32-count)
-	slw	r7,r4,r7	# t2 = count < 32 ? 0 : LSW << (count-32)
-	or	r3,r3,r6	# MSW |= t1
-	slw	r4,r4,r5	# LSW = LSW << count
-	or	r3,r3,r7	# MSW |= t2
-	blr
-
-_GLOBAL(__lshrdi3)
-	subfic	r6,r5,32
-	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
-	addi	r7,r5,32	# could be xori, or addi with -32
-	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
-	srw	r7,r3,r7	# t2 = count < 32 ? 0 : MSW >> (count-32)
-	or	r4,r4,r6	# LSW |= t1
-	srw	r3,r3,r5	# MSW = MSW >> count
-	or	r4,r4,r7	# LSW |= t2
-	blr
-
-_GLOBAL(abs)
-	srawi	r4,r3,31
-	xor	r3,r3,r4
-	sub	r3,r3,r4
-	blr
-
-_GLOBAL(_get_SP)
-	mr	r3,r1		/* Close enough */
-	blr
-
-/*
- * Create a kernel thread
- *   kernel_thread(fn, arg, flags)
- */
-_GLOBAL(kernel_thread)
-	stwu	r1,-16(r1)
-	stw	r30,8(r1)
-	stw	r31,12(r1)
-	mr	r30,r3		/* function */
-	mr	r31,r4		/* argument */
-	ori	r3,r5,CLONE_VM	/* flags */
-	oris	r3,r3,CLONE_UNTRACED>>16
-	li	r4,0		/* new sp (unused) */
-	li	r0,__NR_clone
-	sc
-	cmpwi	0,r3,0		/* parent or child? */
-	bne	1f		/* return if parent */
-	li	r0,0		/* make top-level stack frame */
-	stwu	r0,-16(r1)
-	mtlr	r30		/* fn addr in lr */
-	mr	r3,r31		/* load arg and call fn */
-	PPC440EP_ERR42
-	blrl
-	li	r0,__NR_exit	/* exit if function returns */
-	li	r3,0
-	sc
-1:	lwz	r30,8(r1)
-	lwz	r31,12(r1)
-	addi	r1,r1,16
-	blr
-
-_GLOBAL(kernel_execve)
-	li	r0,__NR_execve
-	sc
-	bnslr
-	neg	r3,r3
-	blr
-
-/*
- * This routine is just here to keep GCC happy - sigh...
- */
-_GLOBAL(__main)
-	blr
-
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
deleted file mode 100644
index df3ef6db072c..000000000000
--- a/arch/ppc/kernel/pci.c
+++ /dev/null
@@ -1,1233 +0,0 @@
-/*
- * Common prep/chrp pci routines. -- Cort
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/capability.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/bootmem.h>
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/pci-bridge.h>
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-unsigned long isa_io_base     = 0;
-unsigned long isa_mem_base    = 0;
-unsigned long pci_dram_offset = 0;
-int pcibios_assign_bus_offset = 1;
-
-void pcibios_make_OF_bus_map(void);
-
-static int pci_relocate_bridge_resource(struct pci_bus *bus, int i);
-static int probe_resource(struct pci_bus *parent, struct resource *pr,
-			  struct resource *res, struct resource **conflict);
-static void update_bridge_base(struct pci_bus *bus, int i);
-static void pcibios_fixup_resources(struct pci_dev* dev);
-static void fixup_broken_pcnet32(struct pci_dev* dev);
-static int reparent_resources(struct resource *parent, struct resource *res);
-static void fixup_cpc710_pci64(struct pci_dev* dev);
-
-/* By default, we don't re-assign bus numbers.
- */
-int pci_assign_all_buses;
-
-struct pci_controller* hose_head;
-struct pci_controller** hose_tail = &hose_head;
-
-static int pci_bus_count;
-
-static void
-fixup_broken_pcnet32(struct pci_dev* dev)
-{
-	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
-		dev->vendor = PCI_VENDOR_ID_AMD;
-		pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT,	PCI_ANY_ID,			fixup_broken_pcnet32);
-
-static void
-fixup_cpc710_pci64(struct pci_dev* dev)
-{
-	/* Hide the PCI64 BARs from the kernel as their content doesn't
-	 * fit well in the resource management
-	 */
-	dev->resource[0].start = dev->resource[0].end = 0;
-	dev->resource[0].flags = 0;
-	dev->resource[1].start = dev->resource[1].end = 0;
-	dev->resource[1].flags = 0;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,	PCI_DEVICE_ID_IBM_CPC710_PCI64,	fixup_cpc710_pci64);
-
-static void
-pcibios_fixup_resources(struct pci_dev *dev)
-{
-	struct pci_controller* hose = (struct pci_controller *)dev->sysdata;
-	int i;
-	unsigned long offset;
-
-	if (!hose) {
-		printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev));
-		return;
-	}
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = dev->resource + i;
-		if (!res->flags)
-			continue;
-		if (res->end == 0xffffffff) {
-			DBG("PCI:%s Resource %d [%016llx-%016llx] is unassigned\n",
-				pci_name(dev), i,
-				(unsigned long long)res->start,
-				(unsigned long long)res->end);
-			res->end -= res->start;
-			res->start = 0;
-			res->flags |= IORESOURCE_UNSET;
-			continue;
-		}
-		offset = 0;
-		if (res->flags & IORESOURCE_MEM) {
-			offset = hose->pci_mem_offset;
-		} else if (res->flags & IORESOURCE_IO) {
-			offset = (unsigned long) hose->io_base_virt
-				- isa_io_base;
-		}
-		if (offset != 0) {
-			res->start += offset;
-			res->end += offset;
-#ifdef DEBUG
-			printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n",
-			       i, res->flags, pci_name(dev),
-			       res->start - offset, res->start);
-#endif
-		}
-	}
-
-	/* Call machine specific resource fixup */
-	if (ppc_md.pcibios_fixup_resources)
-		ppc_md.pcibios_fixup_resources(dev);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID,		PCI_ANY_ID,			pcibios_fixup_resources);
-
-void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			struct resource *res)
-{
-	unsigned long offset = 0;
-	struct pci_controller *hose = dev->sysdata;
-
-	if (hose && res->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	else if (hose && res->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-	region->start = res->start - offset;
-	region->end = res->end - offset;
-}
-EXPORT_SYMBOL(pcibios_resource_to_bus);
-
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-			     struct pci_bus_region *region)
-{
-	unsigned long offset = 0;
-	struct pci_controller *hose = dev->sysdata;
-
-	if (hose && res->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	else if (hose && res->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-	res->start = region->start + offset;
-	res->end = region->end + offset;
-}
-EXPORT_SYMBOL(pcibios_bus_to_resource);
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-void pcibios_align_resource(void *data, struct resource *res,
-				resource_size_t size, resource_size_t align)
-{
-	struct pci_dev *dev = data;
-
-	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
-		if (size > 0x100) {
-			printk(KERN_ERR "PCI: I/O Region %s/%d too large"
-			       " (%lld bytes)\n", pci_name(dev),
-			       dev->resource - res, (unsigned long long)size);
-		}
-
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
-}
-EXPORT_SYMBOL(pcibios_align_resource);
-
-/*
- *  Handle resources of PCI devices.  If the world were perfect, we could
- *  just allocate all the resource regions and do nothing more.  It isn't.
- *  On the other hand, we cannot just re-allocate all devices, as it would
- *  require us to know lots of host bridge internals.  So we attempt to
- *  keep as much of the original configuration as possible, but tweak it
- *  when it's found to be wrong.
- *
- *  Known BIOS problems we have to work around:
- *	- I/O or memory regions not configured
- *	- regions configured, but not enabled in the command register
- *	- bogus I/O addresses above 64K used
- *	- expansion ROMs left enabled (this may sound harmless, but given
- *	  the fact the PCI specs explicitly allow address decoders to be
- *	  shared between expansion ROMs and other resource regions, it's
- *	  at least dangerous)
- *
- *  Our solution:
- *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
- *	    This gives us fixed barriers on where we can allocate.
- *	(2) Allocate resources for all enabled devices.  If there is
- *	    a collision, just mark the resource as unallocated. Also
- *	    disable expansion ROMs during this step.
- *	(3) Try to allocate resources for disabled devices.  If the
- *	    resources were assigned correctly, everything goes well,
- *	    if they weren't, they won't disturb allocation of other
- *	    resources.
- *	(4) Assign new addresses to resources which were either
- *	    not configured at all or misconfigured.  If explicitly
- *	    requested by the user, configure expansion ROM address
- *	    as well.
- */
-
-static void __init
-pcibios_allocate_bus_resources(struct list_head *bus_list)
-{
-	struct pci_bus *bus;
-	int i;
-	struct resource *res, *pr;
-
-	/* Depth-First Search on bus tree */
-	list_for_each_entry(bus, bus_list, node) {
-		for (i = 0; i < 4; ++i) {
-			if ((res = bus->resource[i]) == NULL || !res->flags
-			    || res->start > res->end)
-				continue;
-			if (bus->parent == NULL)
-				pr = (res->flags & IORESOURCE_IO)?
-					&ioport_resource: &iomem_resource;
-			else {
-				pr = pci_find_parent_resource(bus->self, res);
-				if (pr == res) {
-					/* this happens when the generic PCI
-					 * code (wrongly) decides that this
-					 * bridge is transparent  -- paulus
-					 */
-					continue;
-				}
-			}
-
-			DBG("PCI: bridge rsrc %llx..%llx (%lx), parent %p\n",
-				(unsigned long long)res->start,
-				(unsigned long long)res->end, res->flags, pr);
-			if (pr) {
-				if (request_resource(pr, res) == 0)
-					continue;
-				/*
-				 * Must be a conflict with an existing entry.
-				 * Move that entry (or entries) under the
-				 * bridge resource and try again.
-				 */
-				if (reparent_resources(pr, res) == 0)
-					continue;
-			}
-			printk(KERN_ERR "PCI: Cannot allocate resource region "
-			       "%d of PCI bridge %d\n", i, bus->number);
-			if (pci_relocate_bridge_resource(bus, i))
-				bus->resource[i] = NULL;
-		}
-		pcibios_allocate_bus_resources(&bus->children);
-	}
-}
-
-/*
- * Reparent resource children of pr that conflict with res
- * under res, and make res replace those children.
- */
-static int __init
-reparent_resources(struct resource *parent, struct resource *res)
-{
-	struct resource *p, **pp;
-	struct resource **firstpp = NULL;
-
-	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
-		if (p->end < res->start)
-			continue;
-		if (res->end < p->start)
-			break;
-		if (p->start < res->start || p->end > res->end)
-			return -1;	/* not completely contained */
-		if (firstpp == NULL)
-			firstpp = pp;
-	}
-	if (firstpp == NULL)
-		return -1;	/* didn't find any conflicting entries? */
-	res->parent = parent;
-	res->child = *firstpp;
-	res->sibling = *pp;
-	*firstpp = res;
-	*pp = NULL;
-	for (p = res->child; p != NULL; p = p->sibling) {
-		p->parent = res;
-		DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n",
-			p->name, (unsigned long long)p->start,
-			(unsigned long long)p->end, res->name);
-	}
-	return 0;
-}
-
-/*
- * A bridge has been allocated a range which is outside the range
- * of its parent bridge, so it needs to be moved.
- */
-static int __init
-pci_relocate_bridge_resource(struct pci_bus *bus, int i)
-{
-	struct resource *res, *pr, *conflict;
-	unsigned long try, size;
-	int j;
-	struct pci_bus *parent = bus->parent;
-
-	if (parent == NULL) {
-		/* shouldn't ever happen */
-		printk(KERN_ERR "PCI: can't move host bridge resource\n");
-		return -1;
-	}
-	res = bus->resource[i];
-	if (res == NULL)
-		return -1;
-	pr = NULL;
-	for (j = 0; j < 4; j++) {
-		struct resource *r = parent->resource[j];
-		if (!r)
-			continue;
-		if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
-			continue;
-		if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) {
-			pr = r;
-			break;
-		}
-		if (res->flags & IORESOURCE_PREFETCH)
-			pr = r;
-	}
-	if (pr == NULL)
-		return -1;
-	size = res->end - res->start;
-	if (pr->start > pr->end || size > pr->end - pr->start)
-		return -1;
-	try = pr->end;
-	for (;;) {
-		res->start = try - size;
-		res->end = try;
-		if (probe_resource(bus->parent, pr, res, &conflict) == 0)
-			break;
-		if (conflict->start <= pr->start + size)
-			return -1;
-		try = conflict->start - 1;
-	}
-	if (request_resource(pr, res)) {
-		DBG(KERN_ERR "PCI: huh? couldn't move to %llx..%llx\n",
-			(unsigned long long)res->start,
-			(unsigned long long)res->end);
-		return -1;		/* "can't happen" */
-	}
-	update_bridge_base(bus, i);
-	printk(KERN_INFO "PCI: bridge %d resource %d moved to %llx..%llx\n",
-		bus->number, i, (unsigned long long)res->start,
-		(unsigned long long)res->end);
-	return 0;
-}
-
-static int __init
-probe_resource(struct pci_bus *parent, struct resource *pr,
-	       struct resource *res, struct resource **conflict)
-{
-	struct pci_bus *bus;
-	struct pci_dev *dev;
-	struct resource *r;
-	int i;
-
-	for (r = pr->child; r != NULL; r = r->sibling) {
-		if (r->end >= res->start && res->end >= r->start) {
-			*conflict = r;
-			return 1;
-		}
-	}
-	list_for_each_entry(bus, &parent->children, node) {
-		for (i = 0; i < 4; ++i) {
-			if ((r = bus->resource[i]) == NULL)
-				continue;
-			if (!r->flags || r->start > r->end || r == res)
-				continue;
-			if (pci_find_parent_resource(bus->self, r) != pr)
-				continue;
-			if (r->end >= res->start && res->end >= r->start) {
-				*conflict = r;
-				return 1;
-			}
-		}
-	}
-	list_for_each_entry(dev, &parent->devices, bus_list) {
-		for (i = 0; i < 6; ++i) {
-			r = &dev->resource[i];
-			if (!r->flags || (r->flags & IORESOURCE_UNSET))
-				continue;
-			if (pci_find_parent_resource(dev, r) != pr)
-				continue;
-			if (r->end >= res->start && res->end >= r->start) {
-				*conflict = r;
-				return 1;
-			}
-		}
-	}
-	return 0;
-}
-
-static void __init
-update_bridge_base(struct pci_bus *bus, int i)
-{
-	struct resource *res = bus->resource[i];
-	u8 io_base_lo, io_limit_lo;
-	u16 mem_base, mem_limit;
-	u16 cmd;
-	unsigned long start, end, off;
-	struct pci_dev *dev = bus->self;
-	struct pci_controller *hose = dev->sysdata;
-
-	if (!hose) {
-		printk("update_bridge_base: no hose?\n");
-		return;
-	}
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	pci_write_config_word(dev, PCI_COMMAND,
-			      cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
-	if (res->flags & IORESOURCE_IO) {
-		off = (unsigned long) hose->io_base_virt - isa_io_base;
-		start = res->start - off;
-		end = res->end - off;
-		io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
-		io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
-		if (end > 0xffff) {
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
-					      start >> 16);
-			pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
-					      end >> 16);
-			io_base_lo |= PCI_IO_RANGE_TYPE_32;
-		} else
-			io_base_lo |= PCI_IO_RANGE_TYPE_16;
-		pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
-		pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
-
-	} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
-		   == IORESOURCE_MEM) {
-		off = hose->pci_mem_offset;
-		mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
-		mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
-		pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
-		pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
-
-	} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
-		   == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
-		off = hose->pci_mem_offset;
-		mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
-		mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
-		pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
-		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
-
-	} else {
-		DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n",
-		    pci_name(dev), i, res->flags);
-	}
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
-}
-
-static inline void alloc_resource(struct pci_dev *dev, int idx)
-{
-	struct resource *pr, *r = &dev->resource[idx];
-
-	DBG("PCI:%s: Resource %d: %016llx-%016llx (f=%lx)\n",
-	    pci_name(dev), idx, (unsigned long long)r->start,
-	    (unsigned long long)r->end, r->flags);
-	pr = pci_find_parent_resource(dev, r);
-	if (!pr || request_resource(pr, r) < 0) {
-		printk(KERN_ERR "PCI: Cannot allocate resource region %d"
-		       " of device %s\n", idx, pci_name(dev));
-		if (pr)
-			DBG("PCI:  parent is %p: %016llx-%016llx (f=%lx)\n",
-				pr, (unsigned long long)pr->start,
-				(unsigned long long)pr->end, pr->flags);
-		/* We'll assign a new address later */
-		r->flags |= IORESOURCE_UNSET;
-		r->end -= r->start;
-		r->start = 0;
-	}
-}
-
-static void __init
-pcibios_allocate_resources(int pass)
-{
-	struct pci_dev *dev = NULL;
-	int idx, disabled;
-	u16 command;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		pci_read_config_word(dev, PCI_COMMAND, &command);
-		for (idx = 0; idx < 6; idx++) {
-			r = &dev->resource[idx];
-			if (r->parent)		/* Already allocated */
-				continue;
-			if (!r->flags || (r->flags & IORESOURCE_UNSET))
-				continue;	/* Not assigned at all */
-			if (r->flags & IORESOURCE_IO)
-				disabled = !(command & PCI_COMMAND_IO);
-			else
-				disabled = !(command & PCI_COMMAND_MEMORY);
-			if (pass == disabled)
-				alloc_resource(dev, idx);
-		}
-		if (pass)
-			continue;
-		r = &dev->resource[PCI_ROM_RESOURCE];
-		if (r->flags & IORESOURCE_ROM_ENABLE) {
-			/* Turn the ROM off, leave the resource region, but keep it unregistered. */
-			u32 reg;
-			DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
-			r->flags &= ~IORESOURCE_ROM_ENABLE;
-			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
-			pci_write_config_dword(dev, dev->rom_base_reg,
-					       reg & ~PCI_ROM_ADDRESS_ENABLE);
-		}
-	}
-}
-
-static void __init
-pcibios_assign_resources(void)
-{
-	struct pci_dev *dev = NULL;
-	int idx;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		int class = dev->class >> 8;
-
-		/* Don't touch classless devices and host bridges */
-		if (!class || class == PCI_CLASS_BRIDGE_HOST)
-			continue;
-
-		for (idx = 0; idx < 6; idx++) {
-			r = &dev->resource[idx];
-
-			/*
-			 * We shall assign a new address to this resource,
-			 * either because the BIOS (sic) forgot to do so
-			 * or because we have decided the old address was
-			 * unusable for some reason.
-			 */
-			if ((r->flags & IORESOURCE_UNSET) && r->end &&
-			    (!ppc_md.pcibios_enable_device_hook ||
-			     !ppc_md.pcibios_enable_device_hook(dev, 1))) {
-				r->flags &= ~IORESOURCE_UNSET;
-				pci_assign_resource(dev, idx);
-			}
-		}
-
-#if 0 /* don't assign ROMs */
-		r = &dev->resource[PCI_ROM_RESOURCE];
-		r->end -= r->start;
-		r->start = 0;
-		if (r->end)
-			pci_assign_resource(dev, PCI_ROM_RESOURCE);
-#endif
-	}
-}
-
-
-static int next_controller_index;
-
-struct pci_controller * __init
-pcibios_alloc_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose));
-	memset(hose, 0, sizeof(struct pci_controller));
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	hose->index = next_controller_index++;
-
-	return hose;
-}
-
-void pcibios_make_OF_bus_map(void)
-{
-}
-
-static int __init
-pcibios_init(void)
-{
-	struct pci_controller *hose;
-	struct pci_bus *bus;
-	int next_busno;
-
-	printk(KERN_INFO "PCI: Probing PCI hardware\n");
-
-	/* Scan all of the recorded PCI controllers.  */
-	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-		if (pci_assign_all_buses)
-			hose->first_busno = next_busno;
-		hose->last_busno = 0xff;
-		bus = pci_scan_bus(hose->first_busno, hose->ops, hose);
-		hose->last_busno = bus->subordinate;
-		if (pci_assign_all_buses || next_busno <= hose->last_busno)
-			next_busno = hose->last_busno + pcibios_assign_bus_offset;
-	}
-	pci_bus_count = next_busno;
-
-	/* OpenFirmware based machines need a map of OF bus
-	 * numbers vs. kernel bus numbers since we may have to
-	 * remap them.
-	 */
-	if (pci_assign_all_buses && have_of)
-		pcibios_make_OF_bus_map();
-
-	/* Do machine dependent PCI interrupt routing */
-	if (ppc_md.pci_swizzle && ppc_md.pci_map_irq)
-		pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq);
-
-	/* Call machine dependent fixup */
-	if (ppc_md.pcibios_fixup)
-		ppc_md.pcibios_fixup();
-
-	/* Allocate and assign resources */
-	pcibios_allocate_bus_resources(&pci_root_buses);
-	pcibios_allocate_resources(0);
-	pcibios_allocate_resources(1);
-	pcibios_assign_resources();
-
-	/* Call machine dependent post-init code */
-	if (ppc_md.pcibios_after_init)
-		ppc_md.pcibios_after_init();
-
-	return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-unsigned char __init
-common_swizzle(struct pci_dev *dev, unsigned char *pinp)
-{
-	struct pci_controller *hose = dev->sysdata;
-
-	if (dev->bus->number != hose->first_busno) {
-		u8 pin = *pinp;
-		do {
-			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-			/* Move up the chain of bridges. */
-			dev = dev->bus->self;
-		} while (dev->bus->self);
-		*pinp = pin;
-
-		/* The slot is the idsel of the last bridge. */
-	}
-	return PCI_SLOT(dev->devfn);
-}
-
-unsigned long resource_fixup(struct pci_dev * dev, struct resource * res,
-			     unsigned long start, unsigned long size)
-{
-	return start;
-}
-
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
-	unsigned long io_offset;
-	struct resource *res;
-	int i;
-
-	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	if (bus->parent == NULL) {
-		/* This is a host bridge - fill in its resources */
-		hose->bus = bus;
-
-		bus->resource[0] = res = &hose->io_resource;
-		if (!res->flags) {
-			if (io_offset)
-				printk(KERN_ERR "I/O resource not set for host"
-				       " bridge %d\n", hose->index);
-			res->start = 0;
-			res->end = IO_SPACE_LIMIT;
-			res->flags = IORESOURCE_IO;
-		}
-		res->start += io_offset;
-		res->end += io_offset;
-
-		for (i = 0; i < 3; ++i) {
-			res = &hose->mem_resources[i];
-			if (!res->flags) {
-				if (i > 0)
-					continue;
-				printk(KERN_ERR "Memory resource not set for "
-				       "host bridge %d\n", hose->index);
-				res->start = hose->pci_mem_offset;
-				res->end = ~0U;
-				res->flags = IORESOURCE_MEM;
-			}
-			bus->resource[i+1] = res;
-		}
-	} else {
-		/* This is a subordinate bridge */
-		pci_read_bridge_bases(bus);
-
-		for (i = 0; i < 4; ++i) {
-			if ((res = bus->resource[i]) == NULL)
-				continue;
-			if (!res->flags)
-				continue;
-			if (io_offset && (res->flags & IORESOURCE_IO)) {
-				res->start += io_offset;
-				res->end += io_offset;
-			} else if (hose->pci_mem_offset
-				   && (res->flags & IORESOURCE_MEM)) {
-				res->start += hose->pci_mem_offset;
-				res->end += hose->pci_mem_offset;
-			}
-		}
-	}
-
-	if (ppc_md.pcibios_fixup_bus)
-		ppc_md.pcibios_fixup_bus(bus);
-}
-
-char __init *pcibios_setup(char *str)
-{
-	return str;
-}
-
-/* the next one is stolen from the alpha port... */
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-	/* XXX FIXME - update OF device tree node interrupt property */
-}
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	if (ppc_md.pcibios_enable_device_hook)
-		if (ppc_md.pcibios_enable_device_hook(dev, 0))
-			return -EINVAL;
-
-	return pci_enable_resources(dev, mask);
-}
-
-struct pci_controller*
-pci_bus_to_hose(int bus)
-{
-	struct pci_controller* hose = hose_head;
-
-	for (; hose; hose = hose->next)
-		if (bus >= hose->first_busno && bus <= hose->last_busno)
-			return hose;
-	return NULL;
-}
-
-void __iomem *
-pci_bus_io_base(unsigned int bus)
-{
-	struct pci_controller *hose;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return NULL;
-	return hose->io_base_virt;
-}
-
-unsigned long
-pci_bus_io_base_phys(unsigned int bus)
-{
-	struct pci_controller *hose;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return 0;
-	return hose->io_base_phys;
-}
-
-unsigned long
-pci_bus_mem_base_phys(unsigned int bus)
-{
-	struct pci_controller *hose;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return 0;
-	return hose->pci_mem_offset;
-}
-
-unsigned long
-pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
-{
-	/* Hack alert again ! See comments in chrp_pci.c
-	 */
-	struct pci_controller* hose =
-		(struct pci_controller *)pdev->sysdata;
-	if (hose && res->flags & IORESOURCE_MEM)
-		return res->start - hose->pci_mem_offset;
-	/* We may want to do something with IOs here... */
-	return res->start;
-}
-
-
-static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
-					       resource_size_t *offset,
-					       enum pci_mmap_state mmap_state)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-	unsigned long io_offset = 0;
-	int i, res_bit;
-
-	if (hose == 0)
-		return NULL;		/* should never happen */
-
-	/* If memory, add on the PCI bridge address offset */
-	if (mmap_state == pci_mmap_mem) {
-#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
-		*offset += hose->pci_mem_offset;
-#endif
-		res_bit = IORESOURCE_MEM;
-	} else {
-		io_offset = hose->io_base_virt - ___IO_BASE;
-		*offset += io_offset;
-		res_bit = IORESOURCE_IO;
-	}
-
-	/*
-	 * Check that the offset requested corresponds to one of the
-	 * resources of the device.
-	 */
-	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-		struct resource *rp = &dev->resource[i];
-		int flags = rp->flags;
-
-		/* treat ROM as memory (should be already) */
-		if (i == PCI_ROM_RESOURCE)
-			flags |= IORESOURCE_MEM;
-
-		/* Active and same type? */
-		if ((flags & res_bit) == 0)
-			continue;
-
-		/* In the range of this resource? */
-		if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
-			continue;
-
-		/* found it! construct the final physical address */
-		if (mmap_state == pci_mmap_io)
-			*offset += hose->io_base_phys - io_offset;
-		return rp;
-	}
-
-	return NULL;
-}
-
-/*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
-				      pgprot_t protection,
-				      enum pci_mmap_state mmap_state,
-				      int write_combine)
-{
-	unsigned long prot = pgprot_val(protection);
-
-	/* Write combine is always 0 on non-memory space mappings. On
-	 * memory space, if the user didn't pass 1, we check for a
-	 * "prefetchable" resource. This is a bit hackish, but we use
-	 * this to workaround the inability of /sysfs to provide a write
-	 * combine bit
-	 */
-	if (mmap_state != pci_mmap_mem)
-		write_combine = 0;
-	else if (write_combine == 0) {
-		if (rp->flags & IORESOURCE_PREFETCH)
-			write_combine = 1;
-	}
-
-	/* XXX would be nice to have a way to ask for write-through */
-	prot |= _PAGE_NO_CACHE;
-	if (write_combine)
-		prot &= ~_PAGE_GUARDED;
-	else
-		prot |= _PAGE_GUARDED;
-
-	printk("PCI map for %s:%llx, prot: %lx\n", pci_name(dev),
-		(unsigned long long)rp->start, prot);
-
-	return __pgprot(prot);
-}
-
-/*
- * This one is used by /dev/mem and fbdev who have no clue about the
- * PCI device, it tries to find the PCI device first and calls the
- * above routine
- */
-pgprot_t pci_phys_mem_access_prot(struct file *file,
-				  unsigned long pfn,
-				  unsigned long size,
-				  pgprot_t protection)
-{
-	struct pci_dev *pdev = NULL;
-	struct resource *found = NULL;
-	unsigned long prot = pgprot_val(protection);
-	unsigned long offset = pfn << PAGE_SHIFT;
-	int i;
-
-	if (page_is_ram(pfn))
-		return prot;
-
-	prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
-
-	for_each_pci_dev(pdev) {
-		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-			struct resource *rp = &pdev->resource[i];
-			int flags = rp->flags;
-
-			/* Active and same type? */
-			if ((flags & IORESOURCE_MEM) == 0)
-				continue;
-			/* In the range of this resource? */
-			if (offset < (rp->start & PAGE_MASK) ||
-			    offset > rp->end)
-				continue;
-			found = rp;
-			break;
-		}
-		if (found)
-			break;
-	}
-	if (found) {
-		if (found->flags & IORESOURCE_PREFETCH)
-			prot &= ~_PAGE_GUARDED;
-		pci_dev_put(pdev);
-	}
-
-	DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
-
-	return __pgprot(prot);
-}
-
-
-/*
- * Perform the actual remap of the pages for a PCI device mapping, as
- * appropriate for this architecture.  The region in the process to map
- * is described by vm_start and vm_end members of VMA, the base physical
- * address is found in vm_pgoff.
- * The pci device structure is provided so that architectures may make mapping
- * decisions on a per-device or per-bus basis.
- *
- * Returns a negative error code on failure, zero on success.
- */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state,
-			int write_combine)
-{
-	resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
-	struct resource *rp;
-	int ret;
-
-	rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
-	if (rp == NULL)
-		return -EINVAL;
-
-	vma->vm_pgoff = offset >> PAGE_SHIFT;
-	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
-						  vma->vm_page_prot,
-						  mmap_state, write_combine);
-
-	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
-
-	return ret;
-}
-
-/* Obsolete functions. Should be removed once the symbios driver
- * is fixed
- */
-unsigned long
-phys_to_bus(unsigned long pa)
-{
-	struct pci_controller *hose;
-	int i;
-
-	for (hose = hose_head; hose; hose = hose->next) {
-		for (i = 0; i < 3; ++i) {
-			if (pa >= hose->mem_resources[i].start
-			    && pa <= hose->mem_resources[i].end) {
-				/*
-				 * XXX the hose->pci_mem_offset really
-				 * only applies to mem_resources[0].
-				 * We need a way to store an offset for
-				 * the others.  -- paulus
-				 */
-				if (i == 0)
-					pa -= hose->pci_mem_offset;
-				return pa;
-			}
-		}
-	}
-	/* hmmm, didn't find it */
-	return 0;
-}
-
-unsigned long
-pci_phys_to_bus(unsigned long pa, int busnr)
-{
-	struct pci_controller* hose = pci_bus_to_hose(busnr);
-	if (!hose)
-		return pa;
-	return pa - hose->pci_mem_offset;
-}
-
-unsigned long
-pci_bus_to_phys(unsigned int ba, int busnr)
-{
-	struct pci_controller* hose = pci_bus_to_hose(busnr);
-	if (!hose)
-		return ba;
-	return ba + hose->pci_mem_offset;
-}
-
-/* Provide information on locations of various I/O regions in physical
- * memory.  Do this on a per-card basis so that we choose the right
- * root bridge.
- * Note that the returned IO or memory base is a physical address
- */
-
-long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
-{
-	struct pci_controller* hose;
-	long result = -EOPNOTSUPP;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return -ENODEV;
-
-	switch (which) {
-	case IOBASE_BRIDGE_NUMBER:
-		return (long)hose->first_busno;
-	case IOBASE_MEMORY:
-		return (long)hose->pci_mem_offset;
-	case IOBASE_IO:
-		return (long)hose->io_base_phys;
-	case IOBASE_ISA_IO:
-		return (long)isa_io_base;
-	case IOBASE_ISA_MEM:
-		return (long)isa_mem_base;
-	}
-
-	return result;
-}
-
-void pci_resource_to_user(const struct pci_dev *dev, int bar,
-			  const struct resource *rsrc,
-			  resource_size_t *start, resource_size_t *end)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-	resource_size_t offset = 0;
-
-	if (hose == NULL)
-		return;
-
-	if (rsrc->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
-	/* We pass a fully fixed up address to userland for MMIO instead of
-	 * a BAR value because X is lame and expects to be able to use that
-	 * to pass to /dev/mem !
-	 *
-	 * That means that we'll have potentially 64 bits values where some
-	 * userland apps only expect 32 (like X itself since it thinks only
-	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
-	 * 32 bits CHRPs :-(
-	 *
-	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
-	 * has been fixed (and the fix spread enough), we can re-enable the
-	 * 2 lines below and pass down a BAR value to userland. In that case
-	 * we'll also have to re-enable the matching code in
-	 * __pci_mmap_make_offset().
-	 *
-	 * BenH.
-	 */
-#if 0
-	else if (rsrc->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-#endif
-
-	*start = rsrc->start - offset;
-	*end = rsrc->end - offset;
-}
-
-void __init pci_init_resource(struct resource *res, resource_size_t start,
-			      resource_size_t end, int flags, char *name)
-{
-	res->start = start;
-	res->end = end;
-	res->flags = flags;
-	res->name = name;
-	res->parent = NULL;
-	res->sibling = NULL;
-	res->child = NULL;
-}
-
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
-{
-	resource_size_t start = pci_resource_start(dev, bar);
-	resource_size_t len = pci_resource_len(dev, bar);
-	unsigned long flags = pci_resource_flags(dev, bar);
-
-	if (!len)
-		return NULL;
-	if (max && len > max)
-		len = max;
-	if (flags & IORESOURCE_IO)
-		return ioport_map(start, len);
-	if (flags & IORESOURCE_MEM)
-		/* Not checking IORESOURCE_CACHEABLE because PPC does
-		 * not currently distinguish between ioremap and
-		 * ioremap_nocache.
-		 */
-		return ioremap(start, len);
-	/* What? */
-	return NULL;
-}
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
-	/* Nothing to do */
-}
-EXPORT_SYMBOL(pci_iomap);
-EXPORT_SYMBOL(pci_iounmap);
-
-unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	struct pci_controller* hose = hose_head;
-
-	for (; hose; hose = hose->next) {
-		unsigned int size = hose->io_resource.end -
-			hose->io_resource.start + 1;
-		if (address >= hose->io_base_phys &&
-		    address < (hose->io_base_phys + size)) {
-			unsigned long base =
-				(unsigned long)hose->io_base_virt - _IO_BASE;
-			return base + (address - hose->io_base_phys);
-		}
-	}
-	return (unsigned int)-1;
-}
-EXPORT_SYMBOL(pci_address_to_pio);
-
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type)					\
-static int								\
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
-{									\
-	return PCIBIOS_DEVICE_NOT_FOUND;    				\
-}
-
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
-	null_read_config,
-	null_write_config
-};
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
-	static struct pci_bus bus;
-
-	if (hose == 0) {
-		hose = pci_bus_to_hose(busnr);
-		if (hose == 0)
-			printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
-	}
-	bus.number = busnr;
-	bus.sysdata = hose;
-	bus.ops = hose? hose->ops: &null_pci_ops;
-	return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
-			       int devfn, int offset, type value)	\
-{									\
-	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
-					    devfn, offset, value);	\
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
diff --git a/arch/ppc/kernel/ppc-stub.c b/arch/ppc/kernel/ppc-stub.c
deleted file mode 100644
index 5f9ee7bb67ec..000000000000
--- a/arch/ppc/kernel/ppc-stub.c
+++ /dev/null
@@ -1,866 +0,0 @@
-/*
- * ppc-stub.c:  KGDB support for the Linux kernel.
- *
- * adapted from arch/sparc/kernel/sparc-stub.c for the PowerPC
- * some stuff borrowed from Paul Mackerras' xmon
- * Copyright (C) 1998 Michael AK Tesch (tesch@cs.wisc.edu)
- *
- * Modifications to run under Linux
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * This file originally came from the gdb sources, and the
- * copyright notices have been retained below.
- */
-
-/****************************************************************************
-
-		THIS SOFTWARE IS NOT COPYRIGHTED
-
-   HP offers the following for use in the public domain.  HP makes no
-   warranty with regard to the software or its performance and the
-   user accepts the software "AS IS" with all faults.
-
-   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
-   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-****************************************************************************/
-
-/****************************************************************************
- *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
- *
- *  Module name: remcom.c $
- *  Revision: 1.34 $
- *  Date: 91/03/09 12:29:49 $
- *  Contributor:     Lake Stevens Instrument Division$
- *
- *  Description:     low level support for gdb debugger. $
- *
- *  Considerations:  only works on target hardware $
- *
- *  Written by:      Glenn Engel $
- *  ModuleState:     Experimental $
- *
- *  NOTES:           See Below $
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  This code has been extensively tested on the Fujitsu SPARClite demo board.
- *
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a trap #1.
- *
- *************
- *
- *    The following gdb commands are supported:
- *
- * command          function		          Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *    qOffsets      Get section offsets.  Reply is Text=xxx;Data=yyy;Bss=zzz
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
- *							   baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: <two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- ****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
-#include <linux/sysrq.h>
-
-#include <asm/cacheflush.h>
-#include <asm/system.h>
-#include <asm/signal.h>
-#include <asm/kgdb.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-void breakinst(void);
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-static char remcomInBuffer[BUFMAX];
-static char remcomOutBuffer[BUFMAX];
-
-static int initialized;
-static int kgdb_active;
-static int kgdb_started;
-static u_int fault_jmp_buf[100];
-static int kdebug;
-
-
-static const char hexchars[]="0123456789abcdef";
-
-/* Place where we save old trap entries for restoration - sparc*/
-/* struct tt_entry kgdb_savettable[256]; */
-/* typedef void (*trapfunc_t)(void); */
-
-static void kgdb_fault_handler(struct pt_regs *regs);
-static int handle_exception (struct pt_regs *regs);
-
-#if 0
-/* Install an exception handler for kgdb */
-static void exceptionHandler(int tnum, unsigned int *tfunc)
-{
-	/* We are dorking with a live trap table, all irqs off */
-}
-#endif
-
-int
-kgdb_setjmp(long *buf)
-{
-	asm ("mflr 0; stw 0,0(%0);"
-	     "stw 1,4(%0); stw 2,8(%0);"
-	     "mfcr 0; stw 0,12(%0);"
-	     "stmw 13,16(%0)"
-	     : : "r" (buf));
-	/* XXX should save fp regs as well */
-	return 0;
-}
-void
-kgdb_longjmp(long *buf, int val)
-{
-	if (val == 0)
-		val = 1;
-	asm ("lmw 13,16(%0);"
-	     "lwz 0,12(%0); mtcrf 0x38,0;"
-	     "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
-	     "mtlr 0; mr 3,%1"
-	     : : "r" (buf), "r" (val));
-}
-/* Convert ch from a hex digit to an int */
-static int
-hex(unsigned char ch)
-{
-	if (ch >= 'a' && ch <= 'f')
-		return ch-'a'+10;
-	if (ch >= '0' && ch <= '9')
-		return ch-'0';
-	if (ch >= 'A' && ch <= 'F')
-		return ch-'A'+10;
-	return -1;
-}
-
-/* Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- */
-static unsigned char *
-mem2hex(const char *mem, char *buf, int count)
-{
-	unsigned char ch;
-	unsigned short tmp_s;
-	unsigned long tmp_l;
-
-	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
-		debugger_fault_handler = kgdb_fault_handler;
-
-		/* Accessing 16 bit and 32 bit objects in a single
-		** load instruction is required to avoid bad side
-		** effects for some IO registers.
-		*/
-
-		if ((count == 2) && (((long)mem & 1) == 0)) {
-			tmp_s = *(unsigned short *)mem;
-			mem += 2;
-			*buf++ = hexchars[(tmp_s >> 12) & 0xf];
-			*buf++ = hexchars[(tmp_s >> 8) & 0xf];
-			*buf++ = hexchars[(tmp_s >> 4) & 0xf];
-			*buf++ = hexchars[tmp_s & 0xf];
-
-		} else if ((count == 4) && (((long)mem & 3) == 0)) {
-			tmp_l = *(unsigned int *)mem;
-			mem += 4;
-			*buf++ = hexchars[(tmp_l >> 28) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 24) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 20) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 16) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 12) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 8) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 4) & 0xf];
-			*buf++ = hexchars[tmp_l & 0xf];
-
-		} else {
-			while (count-- > 0) {
-				ch = *mem++;
-				*buf++ = hexchars[ch >> 4];
-				*buf++ = hexchars[ch & 0xf];
-			}
-		}
-
-	} else {
-		/* error condition */
-	}
-	debugger_fault_handler = NULL;
-	*buf = 0;
-	return buf;
-}
-
-/* convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written.
-*/
-static char *
-hex2mem(char *buf, char *mem, int count)
-{
-	unsigned char ch;
-	int i;
-	char *orig_mem;
-	unsigned short tmp_s;
-	unsigned long tmp_l;
-
-	orig_mem = mem;
-
-	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
-		debugger_fault_handler = kgdb_fault_handler;
-
-		/* Accessing 16 bit and 32 bit objects in a single
-		** store instruction is required to avoid bad side
-		** effects for some IO registers.
-		*/
-
-		if ((count == 2) && (((long)mem & 1) == 0)) {
-			tmp_s = hex(*buf++) << 12;
-			tmp_s |= hex(*buf++) << 8;
-			tmp_s |= hex(*buf++) << 4;
-			tmp_s |= hex(*buf++);
-
-			*(unsigned short *)mem = tmp_s;
-			mem += 2;
-
-		} else if ((count == 4) && (((long)mem & 3) == 0)) {
-			tmp_l = hex(*buf++) << 28;
-			tmp_l |= hex(*buf++) << 24;
-			tmp_l |= hex(*buf++) << 20;
-			tmp_l |= hex(*buf++) << 16;
-			tmp_l |= hex(*buf++) << 12;
-			tmp_l |= hex(*buf++) << 8;
-			tmp_l |= hex(*buf++) << 4;
-			tmp_l |= hex(*buf++);
-
-			*(unsigned long *)mem = tmp_l;
-			mem += 4;
-
-		} else {
-			for (i=0; i<count; i++) {
-				ch = hex(*buf++) << 4;
-				ch |= hex(*buf++);
-				*mem++ = ch;
-			}
-		}
-
-
-		/*
-		** Flush the data cache, invalidate the instruction cache.
-		*/
-		flush_icache_range((int)orig_mem, (int)orig_mem + count - 1);
-
-	} else {
-		/* error condition */
-	}
-	debugger_fault_handler = NULL;
-	return mem;
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int
-hexToInt(char **ptr, int *intValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*intValue = 0;
-
-	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
-		debugger_fault_handler = kgdb_fault_handler;
-		while (**ptr) {
-			hexValue = hex(**ptr);
-			if (hexValue < 0)
-				break;
-
-			*intValue = (*intValue << 4) | hexValue;
-			numChars ++;
-
-			(*ptr)++;
-		}
-	} else {
-		/* error condition */
-	}
-	debugger_fault_handler = NULL;
-
-	return (numChars);
-}
-
-/* scan for the sequence $<data>#<checksum> */
-static void
-getpacket(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int i;
-	int count;
-	unsigned char ch;
-
-	do {
-		/* wait around for the start character, ignore all other
-		 * characters */
-		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-		checksum = 0;
-		xmitcsum = -1;
-
-		count = 0;
-
-		/* now, read until a # or end of buffer is found */
-		while (count < BUFMAX) {
-			ch = getDebugChar() & 0x7f;
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-
-		if (count >= BUFMAX)
-			continue;
-
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-			xmitcsum |= hex(getDebugChar() & 0x7f);
-			if (checksum != xmitcsum)
-				putDebugChar('-');	/* failed checksum */
-			else {
-				putDebugChar('+'); /* successful transfer */
-				/* if a sequence char is present, reply the ID */
-				if (buffer[2] == ':') {
-					putDebugChar(buffer[0]);
-					putDebugChar(buffer[1]);
-					/* remove sequence chars from buffer */
-					count = strlen(buffer);
-					for (i=3; i <= count; i++)
-						buffer[i-3] = buffer[i];
-				}
-			}
-		}
-	} while (checksum != xmitcsum);
-}
-
-/* send the packet in buffer. */
-static void putpacket(unsigned char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	unsigned char ch, recv;
-
-	/* $<packet info>#<checksum>. */
-	do {
-		putDebugChar('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count])) {
-			putDebugChar(ch);
-			checksum += ch;
-			count += 1;
-		}
-
-		putDebugChar('#');
-		putDebugChar(hexchars[checksum >> 4]);
-		putDebugChar(hexchars[checksum & 0xf]);
-		recv = getDebugChar();
-	} while ((recv & 0x7f) != '+');
-}
-
-static void kgdb_flush_cache_all(void)
-{
-	flush_instruction_cache();
-}
-
-/* Set up exception handlers for tracing and breakpoints
- * [could be called kgdb_init()]
- */
-void set_debug_traps(void)
-{
-#if 0
-	unsigned char c;
-
-	save_and_cli(flags);
-
-	/* In case GDB is started before us, ack any packets (presumably
-	 * "$?#xx") sitting there.
-	 *
-	 * I've found this code causes more problems than it solves,
-	 * so that's why it's commented out.  GDB seems to work fine
-	 * now starting either before or after the kernel   -bwb
-	 */
-
-	while((c = getDebugChar()) != '$');
-	while((c = getDebugChar()) != '#');
-	c = getDebugChar(); /* eat first csum byte */
-	c = getDebugChar(); /* eat second csum byte */
-	putDebugChar('+'); /* ack it */
-#endif
-	debugger = kgdb;
-	debugger_bpt = kgdb_bpt;
-	debugger_sstep = kgdb_sstep;
-	debugger_iabr_match = kgdb_iabr_match;
-	debugger_dabr_match = kgdb_dabr_match;
-
-	initialized = 1;
-}
-
-static void kgdb_fault_handler(struct pt_regs *regs)
-{
-	kgdb_longjmp((long*)fault_jmp_buf, 1);
-}
-
-int kgdb_bpt(struct pt_regs *regs)
-{
-	return handle_exception(regs);
-}
-
-int kgdb_sstep(struct pt_regs *regs)
-{
-	return handle_exception(regs);
-}
-
-void kgdb(struct pt_regs *regs)
-{
-	handle_exception(regs);
-}
-
-int kgdb_iabr_match(struct pt_regs *regs)
-{
-	printk(KERN_ERR "kgdb doesn't support iabr, what?!?\n");
-	return handle_exception(regs);
-}
-
-int kgdb_dabr_match(struct pt_regs *regs)
-{
-	printk(KERN_ERR "kgdb doesn't support dabr, what?!?\n");
-	return handle_exception(regs);
-}
-
-/* Convert the hardware trap type code to a unix signal number. */
-/*
- * This table contains the mapping between PowerPC hardware trap types, and
- * signals, which are primarily what GDB understands.
- */
-static struct hard_trap_info
-{
-	unsigned int tt;		/* Trap type code for powerpc */
-	unsigned char signo;		/* Signal that we map this trap into */
-} hard_trap_info[] = {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-	{ 0x100, SIGINT  },		/* critical input interrupt */
-	{ 0x200, SIGSEGV },		/* machine check */
-	{ 0x300, SIGSEGV },		/* data storage */
-	{ 0x400, SIGBUS  },		/* instruction storage */
-	{ 0x500, SIGINT  },		/* interrupt */
-	{ 0x600, SIGBUS  },		/* alignment */
-	{ 0x700, SIGILL  },		/* program */
-	{ 0x800, SIGILL  },		/* reserved */
-	{ 0x900, SIGILL  },		/* reserved */
-	{ 0xa00, SIGILL  },		/* reserved */
-	{ 0xb00, SIGILL  },		/* reserved */
-	{ 0xc00, SIGCHLD },		/* syscall */
-	{ 0xd00, SIGILL  },		/* reserved */
-	{ 0xe00, SIGILL  },		/* reserved */
-	{ 0xf00, SIGILL  },		/* reserved */
-	/*
-	** 0x1000  PIT
-	** 0x1010  FIT
-	** 0x1020  watchdog
-	** 0x1100  data TLB miss
-	** 0x1200  instruction TLB miss
-	*/
-	{ 0x2002, SIGTRAP},		/* debug */
-#else
-	{ 0x200, SIGSEGV },		/* machine check */
-	{ 0x300, SIGSEGV },		/* address error (store) */
-	{ 0x400, SIGBUS },		/* instruction bus error */
-	{ 0x500, SIGINT },		/* interrupt */
-	{ 0x600, SIGBUS },		/* alingment */
-	{ 0x700, SIGTRAP },		/* breakpoint trap */
-	{ 0x800, SIGFPE },		/* fpu unavail */
-	{ 0x900, SIGALRM },		/* decrementer */
-	{ 0xa00, SIGILL },		/* reserved */
-	{ 0xb00, SIGILL },		/* reserved */
-	{ 0xc00, SIGCHLD },		/* syscall */
-	{ 0xd00, SIGTRAP },		/* single-step/watch */
-	{ 0xe00, SIGFPE },		/* fp assist */
-#endif
-	{ 0, 0}				/* Must be last */
-
-};
-
-static int computeSignal(unsigned int tt)
-{
-	struct hard_trap_info *ht;
-
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		if (ht->tt == tt)
-			return ht->signo;
-
-	return SIGHUP; /* default for things we don't know about */
-}
-
-#define PC_REGNUM 64
-#define SP_REGNUM 1
-
-/*
- * This function does all command processing for interfacing to gdb.
- */
-static int
-handle_exception (struct pt_regs *regs)
-{
-	int sigval;
-	int addr;
-	int length;
-	char *ptr;
-	unsigned int msr;
-
-	/* We don't handle user-mode breakpoints. */
-	if (user_mode(regs))
-		return 0;
-
-	if (debugger_fault_handler) {
-		debugger_fault_handler(regs);
-		panic("kgdb longjump failed!\n");
-	}
-	if (kgdb_active) {
-		printk(KERN_ERR "interrupt while in kgdb, returning\n");
-		return 0;
-	}
-
-	kgdb_active = 1;
-	kgdb_started = 1;
-
-#ifdef KGDB_DEBUG
-	printk("kgdb: entering handle_exception; trap [0x%x]\n",
-			(unsigned int)regs->trap);
-#endif
-
-	kgdb_interruptible(0);
-	lock_kernel();
-	msr = mfmsr();
-	mtmsr(msr & ~MSR_EE);	/* disable interrupts */
-
-	if (regs->nip == (unsigned long)breakinst) {
-		/* Skip over breakpoint trap insn */
-		regs->nip += 4;
-	}
-
-	/* reply to host that an exception has occurred */
-	sigval = computeSignal(regs->trap);
-	ptr = remcomOutBuffer;
-
-	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
-	*ptr++ = hexchars[PC_REGNUM >> 4];
-	*ptr++ = hexchars[PC_REGNUM & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->nip, ptr, 4);
-	*ptr++ = ';';
-	*ptr++ = hexchars[SP_REGNUM >> 4];
-	*ptr++ = hexchars[SP_REGNUM & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex(((char *)regs) + SP_REGNUM*4, ptr, 4);
-	*ptr++ = ';';
-	*ptr++ = 0;
-
-	putpacket(remcomOutBuffer);
-	if (kdebug)
-		printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-
-	/* XXX We may want to add some features dealing with poking the
-	 * XXX page tables, ... (look at sparc-stub.c for more info)
-	 * XXX also required hacking to the gdb sources directly...
-	 */
-
-	while (1) {
-		remcomOutBuffer[0] = 0;
-
-		getpacket(remcomInBuffer);
-		switch (remcomInBuffer[0]) {
-		case '?': /* report most recent signal */
-			remcomOutBuffer[0] = 'S';
-			remcomOutBuffer[1] = hexchars[sigval >> 4];
-			remcomOutBuffer[2] = hexchars[sigval & 0xf];
-			remcomOutBuffer[3] = 0;
-			break;
-#if 0
-		case 'q': /* this screws up gdb for some reason...*/
-		{
-			extern long _start, sdata, __bss_start;
-
-			ptr = &remcomInBuffer[1];
-			if (strncmp(ptr, "Offsets", 7) != 0)
-				break;
-
-			ptr = remcomOutBuffer;
-			sprintf(ptr, "Text=%8.8x;Data=%8.8x;Bss=%8.8x",
-				&_start, &sdata, &__bss_start);
-			break;
-		}
-#endif
-		case 'd':
-			/* toggle debug flag */
-			kdebug ^= 1;
-			break;
-
-		case 'g':	/* return the value of the CPU registers.
-				 * some of them are non-PowerPC names :(
-				 * they are stored in gdb like:
-				 * struct {
-				 *     u32 gpr[32];
-				 *     f64 fpr[32];
-				 *     u32 pc, ps, cnd, lr; (ps=msr)
-				 *     u32 cnt, xer, mq;
-				 * }
-				 */
-		{
-			int i;
-			ptr = remcomOutBuffer;
-			/* General Purpose Regs */
-			ptr = mem2hex((char *)regs, ptr, 32 * 4);
-			/* Floating Point Regs - FIXME */
-			/*ptr = mem2hex((char *), ptr, 32 * 8);*/
-			for(i=0; i<(32*8*2); i++) { /* 2chars/byte */
-				ptr[i] = '0';
-			}
-			ptr += 32*8*2;
-			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
-			ptr = mem2hex((char *)&regs->nip, ptr, 4);
-			ptr = mem2hex((char *)&regs->msr, ptr, 4);
-			ptr = mem2hex((char *)&regs->ccr, ptr, 4);
-			ptr = mem2hex((char *)&regs->link, ptr, 4);
-			ptr = mem2hex((char *)&regs->ctr, ptr, 4);
-			ptr = mem2hex((char *)&regs->xer, ptr, 4);
-		}
-			break;
-
-		case 'G': /* set the value of the CPU registers */
-		{
-			ptr = &remcomInBuffer[1];
-
-			/*
-			 * If the stack pointer has moved, you should pray.
-			 * (cause only god can help you).
-			 */
-
-			/* General Purpose Regs */
-			hex2mem(ptr, (char *)regs, 32 * 4);
-
-			/* Floating Point Regs - FIXME?? */
-			/*ptr = hex2mem(ptr, ??, 32 * 8);*/
-			ptr += 32*8*2;
-
-			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
-			ptr = hex2mem(ptr, (char *)&regs->nip, 4);
-			ptr = hex2mem(ptr, (char *)&regs->msr, 4);
-			ptr = hex2mem(ptr, (char *)&regs->ccr, 4);
-			ptr = hex2mem(ptr, (char *)&regs->link, 4);
-			ptr = hex2mem(ptr, (char *)&regs->ctr, 4);
-			ptr = hex2mem(ptr, (char *)&regs->xer, 4);
-
-			strcpy(remcomOutBuffer,"OK");
-		}
-			break;
-		case 'H':
-			/* don't do anything, yet, just acknowledge */
-			hexToInt(&ptr, &addr);
-			strcpy(remcomOutBuffer,"OK");
-			break;
-
-		case 'm':	/* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
-				/* Try to read %x,%x.  */
-
-			ptr = &remcomInBuffer[1];
-
-			if (hexToInt(&ptr, &addr) && *ptr++ == ','
-					&& hexToInt(&ptr, &length)) {
-				if (mem2hex((char *)addr, remcomOutBuffer,
-							length))
-					break;
-				strcpy(remcomOutBuffer, "E03");
-			} else
-				strcpy(remcomOutBuffer, "E01");
-			break;
-
-		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
-			/* Try to read '%x,%x:'.  */
-
-			ptr = &remcomInBuffer[1];
-
-			if (hexToInt(&ptr, &addr) && *ptr++ == ','
-					&& hexToInt(&ptr, &length)
-					&& *ptr++ == ':') {
-				if (hex2mem(ptr, (char *)addr, length))
-					strcpy(remcomOutBuffer, "OK");
-				else
-					strcpy(remcomOutBuffer, "E03");
-				flush_icache_range(addr, addr+length);
-			} else
-				strcpy(remcomOutBuffer, "E02");
-			break;
-
-
-		case 'k': /* kill the program, actually just continue */
-		case 'c': /* cAA..AA  Continue; address AA..AA optional */
-			/* try to read optional parameter, pc unchanged if no parm */
-
-			ptr = &remcomInBuffer[1];
-			if (hexToInt(&ptr, &addr))
-				regs->nip = addr;
-
-/* Need to flush the instruction cache here, as we may have deposited a
- * breakpoint, and the icache probably has no way of knowing that a data ref to
- * some location may have changed something that is in the instruction cache.
- */
-			kgdb_flush_cache_all();
-			mtmsr(msr);
-
-			kgdb_interruptible(1);
-			unlock_kernel();
-			kgdb_active = 0;
-			if (kdebug) {
-				printk("remcomInBuffer: %s\n", remcomInBuffer);
-				printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-			}
-			return 1;
-
-		case 's':
-			kgdb_flush_cache_all();
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC);
-			regs->msr |= MSR_DE;
-#else
-			regs->msr |= MSR_SE;
-#endif
-			unlock_kernel();
-			kgdb_active = 0;
-			if (kdebug) {
-				printk("remcomInBuffer: %s\n", remcomInBuffer);
-				printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-			}
-			return 1;
-
-		case 'r':		/* Reset (if user process..exit ???)*/
-			panic("kgdb reset.");
-			break;
-		}			/* switch */
-		if (remcomOutBuffer[0] && kdebug) {
-			printk("remcomInBuffer: %s\n", remcomInBuffer);
-			printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-		}
-		/* reply to the request */
-		putpacket(remcomOutBuffer);
-	} /* while(1) */
-}
-
-/* This function will generate a breakpoint exception.  It is used at the
-   beginning of a program to sync up with a debugger and can be used
-   otherwise as a quick means to stop program execution and "break" into
-   the debugger. */
-
-void
-breakpoint(void)
-{
-	if (!initialized) {
-		printk("breakpoint() called b4 kgdb init\n");
-		return;
-	}
-
-	asm("	.globl breakinst	\n\
-	     breakinst: .long 0x7d821008");
-}
-
-#ifdef CONFIG_KGDB_CONSOLE
-/* Output string in GDB O-packet format if GDB has connected. If nothing
-   output, returns 0 (caller must then handle output). */
-int
-kgdb_output_string (const char* s, unsigned int count)
-{
-	char buffer[512];
-
-	if (!kgdb_started)
-		return 0;
-
-	count = (count <= (sizeof(buffer) / 2 - 2))
-		? count : (sizeof(buffer) / 2 - 2);
-
-	buffer[0] = 'O';
-	mem2hex (s, &buffer[1], count);
-	putpacket(buffer);
-
-	return 1;
-}
-#endif
-
-static void sysrq_handle_gdb(int key, struct pt_regs *pt_regs,
-			     struct tty_struct *tty)
-{
-	printk("Entering GDB stub\n");
-	breakpoint();
-}
-static struct sysrq_key_op sysrq_gdb_op = {
-        .handler        = sysrq_handle_gdb,
-        .help_msg       = "Gdb",
-        .action_msg     = "GDB",
-};
-
-static int gdb_register_sysrq(void)
-{
-	printk("Registering GDB sysrq handler\n");
-	register_sysrq_key('g', &sysrq_gdb_op);
-	return 0;
-}
-module_init(gdb_register_sysrq);
diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c
deleted file mode 100644
index 9ed36dd9cbff..000000000000
--- a/arch/ppc/kernel/ppc_htab.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * PowerPC hash table management proc entry.  Will show information
- * about the current hash table and will allow changes to it.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/sysctl.h>
-#include <linux/capability.h>
-#include <linux/ctype.h>
-#include <linux/threads.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/uaccess.h>
-#include <asm/mmu.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/system.h>
-#include <asm/reg.h>
-
-static int ppc_htab_show(struct seq_file *m, void *v);
-static ssize_t ppc_htab_write(struct file * file, const char __user * buffer,
-			      size_t count, loff_t *ppos);
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-extern unsigned long _SDR1;
-extern unsigned long htab_reloads;
-extern unsigned long htab_preloads;
-extern unsigned long htab_evicts;
-extern unsigned long pte_misses;
-extern unsigned long pte_errors;
-extern unsigned int primary_pteg_full;
-extern unsigned int htab_hash_searches;
-
-static int ppc_htab_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ppc_htab_show, NULL);
-}
-
-const struct file_operations ppc_htab_operations = {
-	.open		= ppc_htab_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.write		= ppc_htab_write,
-	.release	= single_release,
-};
-
-static char *pmc1_lookup(unsigned long mmcr0)
-{
-	switch ( mmcr0 & (0x7f<<7) )
-	{
-	case 0x0:
-		return "none";
-	case MMCR0_PMC1_CYCLES:
-		return "cycles";
-	case MMCR0_PMC1_ICACHEMISS:
-		return "ic miss";
-	case MMCR0_PMC1_DTLB:
-		return "dtlb miss";
-	default:
-		return "unknown";
-	}
-}
-
-static char *pmc2_lookup(unsigned long mmcr0)
-{
-	switch ( mmcr0 & 0x3f )
-	{
-	case 0x0:
-		return "none";
-	case MMCR0_PMC2_CYCLES:
-		return "cycles";
-	case MMCR0_PMC2_DCACHEMISS:
-		return "dc miss";
-	case MMCR0_PMC2_ITLB:
-		return "itlb miss";
-	case MMCR0_PMC2_LOADMISSTIME:
-		return "load miss time";
-	default:
-		return "unknown";
-	}
-}
-
-/*
- * print some useful info about the hash table.  This function
- * is _REALLY_ slow (see the nested for loops below) but nothing
- * in here should be really timing critical. -- Cort
- */
-static int ppc_htab_show(struct seq_file *m, void *v)
-{
-	unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0;
-#if defined(CONFIG_PPC_STD_MMU)
-	unsigned int kptes = 0, uptes = 0;
-	PTE *ptr;
-#endif /* CONFIG_PPC_STD_MMU */
-
-	if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
-		mmcr0 = mfspr(SPRN_MMCR0);
-		pmc1 = mfspr(SPRN_PMC1);
-		pmc2 = mfspr(SPRN_PMC2);
-		seq_printf(m,
-			      "604 Performance Monitoring\n"
-			      "MMCR0\t\t: %08lx %s%s ",
-			      mmcr0,
-			      ( mmcr0>>28 & 0x2 ) ? "(user mode counted)" : "",
-			      ( mmcr0>>28 & 0x4 ) ? "(kernel mode counted)" : "");
-		seq_printf(m,
-			      "\nPMC1\t\t: %08lx (%s)\n"
-			      "PMC2\t\t: %08lx (%s)\n",
-			      pmc1, pmc1_lookup(mmcr0),
-			      pmc2, pmc2_lookup(mmcr0));
-	}
-
-#ifdef CONFIG_PPC_STD_MMU
-	/* if we don't have a htab */
-	if ( Hash_size == 0 ) {
-		seq_printf(m, "No Hash Table used\n");
-		return 0;
-	}
-
-	for (ptr = Hash; ptr < Hash_end; ptr++) {
-		unsigned int mctx, vsid;
-
-		if (!ptr->v)
-			continue;
-		/* undo the esid skew */
-		vsid = ptr->vsid;
-		mctx = ((vsid - (vsid & 0xf) * 0x111) >> 4) & 0xfffff;
-		if (mctx == 0)
-			kptes++;
-		else
-			uptes++;
-	}
-
-	seq_printf(m,
-		      "PTE Hash Table Information\n"
-		      "Size\t\t: %luKb\n"
-		      "Buckets\t\t: %lu\n"
- 		      "Address\t\t: %08lx\n"
-		      "Entries\t\t: %lu\n"
-		      "User ptes\t: %u\n"
-		      "Kernel ptes\t: %u\n"
-		      "Percent full\t: %lu%%\n"
-                      , (unsigned long)(Hash_size>>10),
-		      (Hash_size/(sizeof(PTE)*8)),
-		      (unsigned long)Hash,
-		      Hash_size/sizeof(PTE)
-                      , uptes,
-		      kptes,
-		      ((kptes+uptes)*100) / (Hash_size/sizeof(PTE))
-		);
-
-	seq_printf(m,
-		      "Reloads\t\t: %lu\n"
-		      "Preloads\t: %lu\n"
-		      "Searches\t: %u\n"
-		      "Overflows\t: %u\n"
-		      "Evicts\t\t: %lu\n",
-		      htab_reloads, htab_preloads, htab_hash_searches,
-		      primary_pteg_full, htab_evicts);
-#endif /* CONFIG_PPC_STD_MMU */
-
-	seq_printf(m,
-		      "Non-error misses: %lu\n"
-		      "Error misses\t: %lu\n",
-		      pte_misses, pte_errors);
-	return 0;
-}
-
-/*
- * Allow user to define performance counters and resize the hash table
- */
-static ssize_t ppc_htab_write(struct file * file, const char __user * ubuffer,
-			      size_t count, loff_t *ppos)
-{
-#ifdef CONFIG_PPC_STD_MMU
-	unsigned long tmp;
-	char buffer[16];
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EACCES;
-	if (strncpy_from_user(buffer, ubuffer, 15))
-		return -EFAULT;
-	buffer[15] = 0;
-
-	/* don't set the htab size for now */
-	if ( !strncmp( buffer, "size ", 5) )
-		return -EBUSY;
-
-	if ( !strncmp( buffer, "reset", 5) )
-	{
-		if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
-			/* reset PMC1 and PMC2 */
-			mtspr(SPRN_PMC1, 0);
-			mtspr(SPRN_PMC2, 0);
-		}
-		htab_reloads = 0;
-		htab_evicts = 0;
-		pte_misses = 0;
-		pte_errors = 0;
-	}
-
-	/* Everything below here requires the performance monitor feature. */
-	if (!cpu_has_feature(CPU_FTR_604_PERF_MON))
-		return count;
-
-	/* turn off performance monitoring */
-	if ( !strncmp( buffer, "off", 3) )
-	{
-		mtspr(SPRN_MMCR0, 0);
-		mtspr(SPRN_PMC1, 0);
-		mtspr(SPRN_PMC2, 0);
-	}
-
-	if ( !strncmp( buffer, "user", 4) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x20000000;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-		mtspr(SPRN_PMC2, 0);
-	}
-
-	if ( !strncmp( buffer, "kernel", 6) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x40000000;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-		mtspr(SPRN_PMC2, 0);
-	}
-
-	/* PMC1 values */
-	if ( !strncmp( buffer, "dtlb", 4) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x7F << 7)) | MMCR0_PMC1_DTLB;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-	}
-
-	if ( !strncmp( buffer, "ic miss", 7) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x7F<<7)) | MMCR0_PMC1_ICACHEMISS;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-	}
-
-	/* PMC2 values */
-	if ( !strncmp( buffer, "load miss time", 14) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-	       asm volatile(
-		       "mfspr %0,%1\n\t"     /* get current mccr0 */
-		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
-		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
-		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
-		       "mtspr %3,%4 \n\t"    /* reset the pmc */
-		       : "=r" (tmp)
-		       : "i" (SPRN_MMCR0),
-		       "i" (MMCR0_PMC2_LOADMISSTIME),
-		       "i" (SPRN_PMC2),  "r" (0) );
-	}
-
-	if ( !strncmp( buffer, "itlb", 4) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-	       asm volatile(
-		       "mfspr %0,%1\n\t"     /* get current mccr0 */
-		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
-		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
-		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
-		       "mtspr %3,%4 \n\t"    /* reset the pmc */
-		       : "=r" (tmp)
-		       : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_ITLB),
-		       "i" (SPRN_PMC2),  "r" (0) );
-	}
-
-	if ( !strncmp( buffer, "dc miss", 7) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-	       asm volatile(
-		       "mfspr %0,%1\n\t"     /* get current mccr0 */
-		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
-		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
-		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
-		       "mtspr %3,%4 \n\t"    /* reset the pmc */
-		       : "=r" (tmp)
-		       : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_DCACHEMISS),
-		       "i" (SPRN_PMC2),  "r" (0) );
-	}
-
-	return count;
-#else /* CONFIG_PPC_STD_MMU */
-	return 0;
-#endif /* CONFIG_PPC_STD_MMU */
-}
-
-int proc_dol2crvec(ctl_table *table, int write, struct file *filp,
-		  void __user *buffer_arg, size_t *lenp, loff_t *ppos)
-{
-	int vleft, first=1, len, left, val;
-	char __user *buffer = (char __user *) buffer_arg;
-	#define TMPBUFLEN 256
-	char buf[TMPBUFLEN], *p;
-	static const char *sizestrings[4] = {
-		"2MB", "256KB", "512KB", "1MB"
-	};
-	static const char *clockstrings[8] = {
-		"clock disabled", "+1 clock", "+1.5 clock", "reserved(3)",
-		"+2 clock", "+2.5 clock", "+3 clock", "reserved(7)"
-	};
-	static const char *typestrings[4] = {
-		"flow-through burst SRAM", "reserved SRAM",
-		"pipelined burst SRAM", "pipelined late-write SRAM"
-	};
-	static const char *holdstrings[4] = {
-		"0.5", "1.0", "(reserved2)", "(reserved3)"
-	};
-
-	if (!cpu_has_feature(CPU_FTR_L2CR))
-		return -EFAULT;
-
-	if ( /*!table->maxlen ||*/ (*ppos && !write)) {
-		*lenp = 0;
-		return 0;
-	}
-
-	vleft = table->maxlen / sizeof(int);
-	left = *lenp;
-
-	for (; left /*&& vleft--*/; first=0) {
-		if (write) {
-			while (left) {
-				char c;
-				if(get_user(c, buffer))
-					return -EFAULT;
-				if (!isspace(c))
-					break;
-				left--;
-				buffer++;
-			}
-			if (!left)
-				break;
-			len = left;
-			if (len > TMPBUFLEN-1)
-				len = TMPBUFLEN-1;
-			if(copy_from_user(buf, buffer, len))
-				return -EFAULT;
-			buf[len] = 0;
-			p = buf;
-			if (*p < '0' || *p > '9')
-				break;
-			val = simple_strtoul(p, &p, 0);
-			len = p-buf;
-			if ((len < left) && *p && !isspace(*p))
-				break;
-			buffer += len;
-			left -= len;
-			_set_L2CR(val);
-		} else {
-			p = buf;
-			if (!first)
-				*p++ = '\t';
-			val = _get_L2CR();
-			p += sprintf(p, "0x%08x: ", val);
-			p += sprintf(p, " %s", (val >> 31) & 1 ? "enabled" :
-				     	"disabled");
-			p += sprintf(p, ", %sparity", (val>>30)&1 ? "" : "no ");
-			p += sprintf(p, ", %s", sizestrings[(val >> 28) & 3]);
-			p += sprintf(p, ", %s", clockstrings[(val >> 25) & 7]);
-			p += sprintf(p, ", %s", typestrings[(val >> 23) & 2]);
-			p += sprintf(p, "%s", (val>>22)&1 ? ", data only" : "");
-			p += sprintf(p, "%s", (val>>20)&1 ? ", ZZ enabled": "");
-			p += sprintf(p, ", %s", (val>>19)&1 ? "write-through" :
-					"copy-back");
-			p += sprintf(p, "%s", (val>>18)&1 ? ", testing" : "");
-			p += sprintf(p, ", %sns hold",holdstrings[(val>>16)&3]);
-			p += sprintf(p, "%s", (val>>15)&1 ? ", DLL slow" : "");
-			p += sprintf(p, "%s", (val>>14)&1 ? ", diff clock" :"");
-			p += sprintf(p, "%s", (val>>13)&1 ? ", DLL bypass" :"");
-
-			p += sprintf(p,"\n");
-
-			len = strlen(buf);
-			if (len > left)
-				len = left;
-			if (copy_to_user(buffer, buf, len))
-				return -EFAULT;
-			left -= len;
-			buffer += len;
-			break;
-		}
-	}
-
-	if (!write && !first && left) {
-		if(put_user('\n', (char __user *) buffer))
-			return -EFAULT;
-		left--, buffer++;
-	}
-	if (write) {
-		char __user *s = (char __user *) buffer;
-		while (left) {
-			char c;
-			if(get_user(c, s++))
-				return -EFAULT;
-			if (!isspace(c))
-				break;
-			left--;
-		}
-	}
-	if (write && first)
-		return -EINVAL;
-	*lenp -= left;
-	*ppos += *lenp;
-	return 0;
-}
-
-#ifdef CONFIG_SYSCTL
-/*
- * Register our sysctl.
- */
-static ctl_table htab_ctl_table[]={
-	{
-		.procname	= "l2cr",
-		.mode		= 0644,
-		.proc_handler	= &proc_dol2crvec,
-	},
-	{}
-};
-static ctl_table htab_sysctl_root[] = {
-	{
-		.ctl_name	= CTL_KERN,
-		.procname	= "kernel",
-		.mode		= 0555,
-		.child		= htab_ctl_table,
-	},
-	{}
-};
-
-static int __init
-register_ppc_htab_sysctl(void)
-{
-	register_sysctl_table(htab_sysctl_root);
-
-	return 0;
-}
-
-__initcall(register_ppc_htab_sysctl);
-#endif
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
deleted file mode 100644
index 5d529bcbeee9..000000000000
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ /dev/null
@@ -1,258 +0,0 @@
-#include <linux/module.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/sched.h>
-#include <linux/elfcore.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/screen_info.h>
-#include <linux/vt_kern.h>
-#include <linux/nvram.h>
-#include <linux/console.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/ide.h>
-#include <asm/atomic.h>
-#include <asm/checksum.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <linux/adb.h>
-#include <linux/cuda.h>
-#include <linux/pmu.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/irq.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/hw_irq.h>
-#include <asm/nvram.h>
-#include <asm/mmu_context.h>
-#include <asm/backlight.h>
-#include <asm/time.h>
-#include <asm/cputable.h>
-#include <asm/btext.h>
-#include <asm/xmon.h>
-#include <asm/signal.h>
-#include <asm/dcr.h>
-
-#ifdef  CONFIG_8xx
-#include <asm/cpm1.h>
-#endif
-
-extern void transfer_to_handler(void);
-extern void do_IRQ(struct pt_regs *regs);
-extern void machine_check_exception(struct pt_regs *regs);
-extern void alignment_exception(struct pt_regs *regs);
-extern void program_check_exception(struct pt_regs *regs);
-extern void single_step_exception(struct pt_regs *regs);
-extern int sys_sigreturn(struct pt_regs *regs);
-
-long long __ashrdi3(long long, int);
-long long __ashldi3(long long, int);
-long long __lshrdi3(long long, int);
-
-EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(clear_pages);
-EXPORT_SYMBOL(clear_user_page);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(transfer_to_handler);
-EXPORT_SYMBOL(do_IRQ);
-EXPORT_SYMBOL(machine_check_exception);
-EXPORT_SYMBOL(alignment_exception);
-EXPORT_SYMBOL(program_check_exception);
-EXPORT_SYMBOL(single_step_exception);
-EXPORT_SYMBOL(sys_sigreturn);
-EXPORT_SYMBOL(ppc_n_lost_interrupts);
-
-EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
-EXPORT_SYMBOL(DMA_MODE_READ);
-EXPORT_SYMBOL(DMA_MODE_WRITE);
-
-#if !defined(__INLINE_BITOPS)
-EXPORT_SYMBOL(set_bit);
-EXPORT_SYMBOL(clear_bit);
-EXPORT_SYMBOL(change_bit);
-EXPORT_SYMBOL(test_and_set_bit);
-EXPORT_SYMBOL(test_and_clear_bit);
-EXPORT_SYMBOL(test_and_change_bit);
-#endif /* __INLINE_BITOPS */
-
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(ip_fast_csum);
-EXPORT_SYMBOL(csum_tcpudp_magic);
-
-EXPORT_SYMBOL(__copy_tofrom_user);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(__strnlen_user);
-
-/*
-EXPORT_SYMBOL(inb);
-EXPORT_SYMBOL(inw);
-EXPORT_SYMBOL(inl);
-EXPORT_SYMBOL(outb);
-EXPORT_SYMBOL(outw);
-EXPORT_SYMBOL(outl);
-EXPORT_SYMBOL(outsl);*/
-
-EXPORT_SYMBOL(_insb);
-EXPORT_SYMBOL(_outsb);
-EXPORT_SYMBOL(_insw_ns);
-EXPORT_SYMBOL(_outsw_ns);
-EXPORT_SYMBOL(_insl_ns);
-EXPORT_SYMBOL(_outsl_ns);
-EXPORT_SYMBOL(iopa);
-EXPORT_SYMBOL(ioremap);
-#ifdef CONFIG_44x
-EXPORT_SYMBOL(ioremap64);
-#endif
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
-EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
-
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(isa_io_base);
-EXPORT_SYMBOL(isa_mem_base);
-EXPORT_SYMBOL(pci_dram_offset);
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
-EXPORT_SYMBOL(pci_bus_io_base);
-EXPORT_SYMBOL(pci_bus_io_base_phys);
-EXPORT_SYMBOL(pci_bus_mem_base_phys);
-EXPORT_SYMBOL(pci_bus_to_hose);
-EXPORT_SYMBOL(pci_resource_to_bus);
-EXPORT_SYMBOL(pci_phys_to_bus);
-EXPORT_SYMBOL(pci_bus_to_phys);
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-extern void flush_dcache_all(void);
-EXPORT_SYMBOL(flush_dcache_all);
-#endif
-
-EXPORT_SYMBOL(start_thread);
-EXPORT_SYMBOL(kernel_thread);
-
-EXPORT_SYMBOL(flush_instruction_cache);
-EXPORT_SYMBOL(giveup_fpu);
-EXPORT_SYMBOL(__flush_icache_range);
-EXPORT_SYMBOL(flush_dcache_range);
-EXPORT_SYMBOL(flush_icache_user_range);
-EXPORT_SYMBOL(flush_dcache_page);
-EXPORT_SYMBOL(flush_tlb_kernel_range);
-EXPORT_SYMBOL(flush_tlb_page);
-EXPORT_SYMBOL(_tlbie);
-#ifdef CONFIG_ALTIVEC
-#ifndef CONFIG_SMP
-EXPORT_SYMBOL(last_task_used_altivec);
-#endif
-EXPORT_SYMBOL(giveup_altivec);
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SMP
-EXPORT_SYMBOL(smp_call_function);
-EXPORT_SYMBOL(smp_hw_index);
-#endif
-
-EXPORT_SYMBOL(ppc_md);
-
-#ifdef CONFIG_ADB
-EXPORT_SYMBOL(adb_request);
-EXPORT_SYMBOL(adb_register);
-EXPORT_SYMBOL(adb_unregister);
-EXPORT_SYMBOL(adb_poll);
-EXPORT_SYMBOL(adb_try_handler_change);
-#endif /* CONFIG_ADB */
-#ifdef CONFIG_ADB_CUDA
-EXPORT_SYMBOL(cuda_request);
-EXPORT_SYMBOL(cuda_poll);
-#endif /* CONFIG_ADB_CUDA */
-#if defined(CONFIG_BOOTX_TEXT)
-EXPORT_SYMBOL(btext_update_display);
-#endif
-EXPORT_SYMBOL(to_tm);
-
-EXPORT_SYMBOL(pm_power_off);
-
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(cacheable_memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memchr);
-
-#if defined(CONFIG_FB_VGA16_MODULE)
-EXPORT_SYMBOL(screen_info);
-#endif
-
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(timer_interrupt);
-EXPORT_SYMBOL(irq_desc);
-EXPORT_SYMBOL(tb_ticks_per_jiffy);
-EXPORT_SYMBOL(console_drivers);
-#ifdef CONFIG_XMON
-EXPORT_SYMBOL(xmon);
-EXPORT_SYMBOL(xmon_printf);
-#endif
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON)
-extern void (*debugger)(struct pt_regs *regs);
-extern int (*debugger_bpt)(struct pt_regs *regs);
-extern int (*debugger_sstep)(struct pt_regs *regs);
-extern int (*debugger_iabr_match)(struct pt_regs *regs);
-extern int (*debugger_dabr_match)(struct pt_regs *regs);
-extern void (*debugger_fault_handler)(struct pt_regs *regs);
-
-EXPORT_SYMBOL(debugger);
-EXPORT_SYMBOL(debugger_bpt);
-EXPORT_SYMBOL(debugger_sstep);
-EXPORT_SYMBOL(debugger_iabr_match);
-EXPORT_SYMBOL(debugger_dabr_match);
-EXPORT_SYMBOL(debugger_fault_handler);
-#endif
-
-#ifdef  CONFIG_8xx
-EXPORT_SYMBOL(cpm_install_handler);
-EXPORT_SYMBOL(cpm_free_handler);
-#endif /* CONFIG_8xx */
-#if defined(CONFIG_8xx) || defined(CONFIG_40x)
-EXPORT_SYMBOL(__res);
-#endif
-
-EXPORT_SYMBOL(next_mmu_context);
-EXPORT_SYMBOL(set_context);
-EXPORT_SYMBOL(disarm_decr);
-#ifdef CONFIG_PPC_STD_MMU
-extern long mol_trampoline;
-EXPORT_SYMBOL(mol_trampoline); /* For MOL */
-EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
-#ifdef CONFIG_SMP
-extern int mmu_hash_lock;
-EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
-#endif /* CONFIG_SMP */
-extern long *intercept_table;
-EXPORT_SYMBOL(intercept_table);
-#endif /* CONFIG_PPC_STD_MMU */
-#ifdef CONFIG_PPC_DCR_NATIVE
-EXPORT_SYMBOL(__mtdcr);
-EXPORT_SYMBOL(__mfdcr);
-#endif
diff --git a/arch/ppc/kernel/relocate_kernel.S b/arch/ppc/kernel/relocate_kernel.S
deleted file mode 100644
index 9b2ad48e988c..000000000000
--- a/arch/ppc/kernel/relocate_kernel.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * relocate_kernel.S - put the kernel image in place to boot
- * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
- *
- * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2.  See the file COPYING for more details.
- */
-
-#include <asm/reg.h>
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-#include <asm/kexec.h>
-
-#define PAGE_SIZE      4096 /* must be same value as in <asm/page.h> */
-
-	/*
-	 * Must be relocatable PIC code callable as a C function.
-	 */
-	.globl relocate_new_kernel
-relocate_new_kernel:
-	/* r3 = page_list   */
-	/* r4 = reboot_code_buffer */
-	/* r5 = start_address      */
-
-	li	r0, 0
-
-	/*
-	 * Set Machine Status Register to a known status,
-	 * switch the MMU off and jump to 1: in a single step.
-	 */
-
-	mr	r8, r0
-	ori     r8, r8, MSR_RI|MSR_ME
-	mtspr	SPRN_SRR1, r8
-	addi	r8, r4, 1f - relocate_new_kernel
-	mtspr	SPRN_SRR0, r8
-	sync
-	rfi
-
-1:
-	/* from this point address translation is turned off */
-	/* and interrupts are disabled */
-
-	/* set a new stack at the bottom of our page... */
-	/* (not really needed now) */
-	addi	r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */
-	stw	r0, 0(r1)
-
-	/* Do the copies */
-	li	r6, 0 /* checksum */
-	mr	r0, r3
-	b	1f
-
-0:	/* top, read another word for the indirection page */
-	lwzu	r0, 4(r3)
-
-1:
-	/* is it a destination page? (r8) */
-	rlwinm.	r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */
-	beq	2f
-
-	rlwinm	r8, r0, 0, 0, 19 /* clear kexec flags, page align */
-	b	0b
-
-2:	/* is it an indirection page? (r3) */
-	rlwinm.	r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */
-	beq	2f
-
-	rlwinm	r3, r0, 0, 0, 19 /* clear kexec flags, page align */
-	subi	r3, r3, 4
-	b	0b
-
-2:	/* are we done? */
-	rlwinm.	r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */
-	beq	2f
-	b	3f
-
-2:	/* is it a source page? (r9) */
-	rlwinm.	r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */
-	beq	0b
-
-	rlwinm	r9, r0, 0, 0, 19 /* clear kexec flags, page align */
-
-	li	r7, PAGE_SIZE / 4
-	mtctr   r7
-	subi    r9, r9, 4
-	subi    r8, r8, 4
-9:
-	lwzu    r0, 4(r9)  /* do the copy */
-	xor	r6, r6, r0
-	stwu    r0, 4(r8)
-	dcbst	0, r8
-	sync
-	icbi	0, r8
-	bdnz    9b
-
-	addi    r9, r9, 4
-	addi    r8, r8, 4
-	b	0b
-
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * execute a serializing instruction here.
-	 */
-	isync
-	sync
-
-	/* jump to the entry point, usually the setup routine */
-	mtlr	r5
-	blrl
-
-1:	b	1b
-
-relocate_new_kernel_end:
-
-	.globl relocate_new_kernel_size
-relocate_new_kernel_size:
-	.long relocate_new_kernel_end - relocate_new_kernel
-
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
deleted file mode 100644
index 51e8094f52d6..000000000000
--- a/arch/ppc/kernel/setup.c
+++ /dev/null
@@ -1,572 +0,0 @@
-/*
- * Common prep boot and setup code.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/screen_info.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/cpu.h>
-#include <linux/console.h>
-
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/smp.h>
-#include <asm/elf.h>
-#include <asm/cputable.h>
-#include <asm/bootx.h>
-#include <asm/btext.h>
-#include <asm/machdep.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/sections.h>
-#include <asm/nvram.h>
-#include <asm/xmon.h>
-#include <asm/ocp.h>
-#include <asm/irq.h>
-
-#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
-		      defined(CONFIG_PPC_MPC52xx))
-
-#if USES_PPC_SYS
-#include <asm/ppc_sys.h>
-#endif
-
-#if defined CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-
-extern void platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7);
-extern void reloc_got2(unsigned long offset);
-
-extern void ppc6xx_idle(void);
-extern void power4_idle(void);
-
-extern boot_infos_t *boot_infos;
-
-/* Used with the BI_MEMSIZE bootinfo parameter to store the memory
-   size value reported by the boot loader. */
-unsigned long boot_mem_size;
-
-unsigned long ISA_DMA_THRESHOLD;
-unsigned int DMA_MODE_READ;
-unsigned int DMA_MODE_WRITE;
-
-#ifdef CONFIG_PPC_PREP
-extern void prep_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7);
-
-dev_t boot_dev;
-#endif /* CONFIG_PPC_PREP */
-
-int have_of;
-EXPORT_SYMBOL(have_of);
-
-#ifdef __DO_IRQ_CANON
-int ppc_do_canonicalize_irqs;
-EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
-#endif
-
-#ifdef CONFIG_VGA_CONSOLE
-unsigned long vgacon_remap_base;
-#endif
-
-struct machdep_calls ppc_md;
-
-/*
- * These are used in binfmt_elf.c to put aux entries on the stack
- * for each elf executable being started.
- */
-int dcache_bsize;
-int icache_bsize;
-int ucache_bsize;
-
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_FB_VGA16) || \
-    defined(CONFIG_FB_VGA16_MODULE) || defined(CONFIG_FB_VESA)
-struct screen_info screen_info = {
-	0, 25,			/* orig-x, orig-y */
-	0,			/* unused */
-	0,			/* orig-video-page */
-	0,			/* orig-video-mode */
-	80,			/* orig-video-cols */
-	0,0,0,			/* ega_ax, ega_bx, ega_cx */
-	25,			/* orig-video-lines */
-	1,			/* orig-video-isVGA */
-	16			/* orig-video-points */
-};
-#endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */
-
-void machine_restart(char *cmd)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	ppc_md.restart(cmd);
-}
-
-static void ppc_generic_power_off(void)
-{
-	ppc_md.power_off();
-}
-
-void machine_halt(void)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	ppc_md.halt();
-}
-
-void (*pm_power_off)(void) = ppc_generic_power_off;
-
-void machine_power_off(void)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	if (pm_power_off)
-		pm_power_off();
-	ppc_generic_power_off();
-}
-
-#ifdef CONFIG_TAU
-extern u32 cpu_temp(unsigned long cpu);
-extern u32 cpu_temp_both(unsigned long cpu);
-#endif /* CONFIG_TAU */
-
-int show_cpuinfo(struct seq_file *m, void *v)
-{
-	int i = (int) v - 1;
-	int err = 0;
-	unsigned int pvr;
-	unsigned short maj, min;
-	unsigned long lpj;
-
-	if (i >= NR_CPUS) {
-		/* Show summary information */
-#ifdef CONFIG_SMP
-		unsigned long bogosum = 0;
-		for_each_online_cpu(i)
-			bogosum += cpu_data[i].loops_per_jiffy;
-		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
-			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
-#endif /* CONFIG_SMP */
-
-		if (ppc_md.show_cpuinfo != NULL)
-			err = ppc_md.show_cpuinfo(m);
-		return err;
-	}
-
-#ifdef CONFIG_SMP
-	if (!cpu_online(i))
-		return 0;
-	pvr = cpu_data[i].pvr;
-	lpj = cpu_data[i].loops_per_jiffy;
-#else
-	pvr = mfspr(SPRN_PVR);
-	lpj = loops_per_jiffy;
-#endif
-
-	seq_printf(m, "processor\t: %d\n", i);
-	seq_printf(m, "cpu\t\t: ");
-
-	if (cur_cpu_spec->pvr_mask)
-		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
-	else
-		seq_printf(m, "unknown (%08x)", pvr);
-#ifdef CONFIG_ALTIVEC
-	if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
-		seq_printf(m, ", altivec supported");
-#endif
-	seq_printf(m, "\n");
-
-#ifdef CONFIG_TAU
-	if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
-#ifdef CONFIG_TAU_AVERAGE
-		/* more straightforward, but potentially misleading */
-		seq_printf(m,  "temperature \t: %u C (uncalibrated)\n",
-			   cpu_temp(i));
-#else
-		/* show the actual temp sensor range */
-		u32 temp;
-		temp = cpu_temp_both(i);
-		seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
-			   temp & 0xff, temp >> 16);
-#endif
-	}
-#endif /* CONFIG_TAU */
-
-	if (ppc_md.show_percpuinfo != NULL) {
-		err = ppc_md.show_percpuinfo(m, i);
-		if (err)
-			return err;
-	}
-
-	/* If we are a Freescale core do a simple check so
-	 * we dont have to keep adding cases in the future */
-	if ((PVR_VER(pvr) & 0x8000) == 0x8000) {
-		maj = PVR_MAJ(pvr);
-		min = PVR_MIN(pvr);
-	} else {
-		switch (PVR_VER(pvr)) {
-			case 0x0020:	/* 403 family */
-				maj = PVR_MAJ(pvr) + 1;
-				min = PVR_MIN(pvr);
-				break;
-			case 0x1008:	/* 740P/750P ?? */
-				maj = ((pvr >> 8) & 0xFF) - 1;
-				min = pvr & 0xFF;
-				break;
-			default:
-				maj = (pvr >> 8) & 0xFF;
-				min = pvr & 0xFF;
-				break;
-		}
-	}
-
-	seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
-		   maj, min, PVR_VER(pvr), PVR_REV(pvr));
-
-	seq_printf(m, "bogomips\t: %lu.%02lu\n",
-		   lpj / (500000/HZ), (lpj / (5000/HZ)) % 100);
-
-#if USES_PPC_SYS
-	if (cur_ppc_sys_spec->ppc_sys_name)
-		seq_printf(m, "chipset\t\t: %s\n",
-			cur_ppc_sys_spec->ppc_sys_name);
-#endif
-
-#ifdef CONFIG_SMP
-	seq_printf(m, "\n");
-#endif
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	int i = *pos;
-
-	return i <= NR_CPUS? (void *) (i + 1): NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start =c_start,
-	.next =	c_next,
-	.stop =	c_stop,
-	.show =	show_cpuinfo,
-};
-
-/*
- * We're called here very early in the boot.  We determine the machine
- * type and call the appropriate low-level setup functions.
- *  -- Cort <cort@fsmlabs.com>
- *
- * Note that the kernel may be running at an address which is different
- * from the address that it was linked at, so we must use RELOC/PTRRELOC
- * to access static data (including strings).  -- paulus
- */
-__init
-unsigned long
-early_init(int r3, int r4, int r5)
-{
- 	unsigned long phys;
-	unsigned long offset = reloc_offset();
-	struct cpu_spec *spec;
-
- 	/* Default */
- 	phys = offset + KERNELBASE;
-
-	/* First zero the BSS -- use memset, some arches don't have
-	 * caches on yet */
-	memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
-
-	/*
-	 * Identify the CPU type and fix up code sections
-	 * that depend on which cpu we have.
-	 */
-#if defined(CONFIG_440EP) && defined(CONFIG_PPC_FPU)
-	/* We pass the virtual PVR here for 440EP as 440EP and 440GR have
-	 * identical PVRs and there is no reliable way to check for the FPU
-	 */
-	spec = identify_cpu(offset, (mfspr(SPRN_PVR) | 0x8));
-#else
-	spec = identify_cpu(offset, mfspr(SPRN_PVR));
-#endif
-	do_feature_fixups(spec->cpu_features,
-			  PTRRELOC(&__start___ftr_fixup),
-			  PTRRELOC(&__stop___ftr_fixup));
-
-	return phys;
-}
-
-#ifdef CONFIG_PPC_PREP
-/*
- * The PPC_PREP version of platform_init...
- */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_BOOTX_TEXT
-	if (boot_text_mapped) {
-		btext_clearscreen();
-		btext_welcome();
-	}
-#endif
-
-	parse_bootinfo(find_bootinfo());
-
-	prep_init(r3, r4, r5, r6, r7);
-}
-#endif /* CONFIG_PPC_PREP */
-
-struct bi_record *find_bootinfo(void)
-{
-	struct bi_record *rec;
-
-	rec = (struct bi_record *)_ALIGN((ulong)__bss_start+(1<<20)-1,(1<<20));
-	if ( rec->tag != BI_FIRST ) {
-		/*
-		 * This 0x10000 offset is a terrible hack but it will go away when
-		 * we have the bootloader handle all the relocation and
-		 * prom calls -- Cort
-		 */
-		rec = (struct bi_record *)_ALIGN((ulong)__bss_start+0x10000+(1<<20)-1,(1<<20));
-		if ( rec->tag != BI_FIRST )
-			return NULL;
-	}
-	return rec;
-}
-
-void parse_bootinfo(struct bi_record *rec)
-{
-	if (rec == NULL || rec->tag != BI_FIRST)
-		return;
-	while (rec->tag != BI_LAST) {
-		ulong *data = rec->data;
-		switch (rec->tag) {
-		case BI_CMD_LINE:
-			strlcpy(cmd_line, (void *)data, sizeof(cmd_line));
-			break;
-#ifdef CONFIG_BLK_DEV_INITRD
-		case BI_INITRD:
-			initrd_start = data[0] + KERNELBASE;
-			initrd_end = data[0] + data[1] + KERNELBASE;
-			break;
-#endif /* CONFIG_BLK_DEV_INITRD */
-		case BI_MEMSIZE:
-			boot_mem_size = data[0];
-			break;
-		}
-		rec = (struct bi_record *)((ulong)rec + rec->size);
-	}
-}
-
-/*
- * Find out what kind of machine we're on and save any data we need
- * from the early boot process (devtree is copied on pmac by prom_init()).
- * This is called very early on the boot process, after a minimal
- * MMU environment has been set up but before MMU_init is called.
- */
-void __init
-machine_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	     unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_CMDLINE
-	strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
-#endif /* CONFIG_CMDLINE */
-
-#ifdef CONFIG_6xx
-	ppc_md.power_save = ppc6xx_idle;
-#endif
-
-	platform_init(r3, r4, r5, r6, r7);
-
-	if (ppc_md.progress)
-		ppc_md.progress("id mach(): done", 0x200);
-}
-#ifdef CONFIG_BOOKE_WDT
-/* Checks wdt=x and wdt_period=xx command-line option */
-int __init early_parse_wdt(char *p)
-{
-	if (p && strncmp(p, "0", 1) != 0)
-	       booke_wdt_enabled = 1;
-
-	return 0;
-}
-early_param("wdt", early_parse_wdt);
-
-int __init early_parse_wdt_period (char *p)
-{
-	if (p)
-		booke_wdt_period = simple_strtoul(p, NULL, 0);
-
-	return 0;
-}
-early_param("wdt_period", early_parse_wdt_period);
-#endif	/* CONFIG_BOOKE_WDT */
-
-/* Checks "l2cr=xxxx" command-line option */
-int __init ppc_setup_l2cr(char *str)
-{
-	if (cpu_has_feature(CPU_FTR_L2CR)) {
-		unsigned long val = simple_strtoul(str, NULL, 0);
-		printk(KERN_INFO "l2cr set to %lx\n", val);
-		_set_L2CR(0);		/* force invalidate by disable cache */
-		_set_L2CR(val);		/* and enable it */
-	}
-	return 1;
-}
-__setup("l2cr=", ppc_setup_l2cr);
-
-#ifdef CONFIG_GENERIC_NVRAM
-
-/* Generic nvram hooks used by drivers/char/gen_nvram.c */
-unsigned char nvram_read_byte(int addr)
-{
-	if (ppc_md.nvram_read_val)
-		return ppc_md.nvram_read_val(addr);
-	return 0xff;
-}
-EXPORT_SYMBOL(nvram_read_byte);
-
-void nvram_write_byte(unsigned char val, int addr)
-{
-	if (ppc_md.nvram_write_val)
-		ppc_md.nvram_write_val(addr, val);
-}
-EXPORT_SYMBOL(nvram_write_byte);
-
-void nvram_sync(void)
-{
-	if (ppc_md.nvram_sync)
-		ppc_md.nvram_sync();
-}
-EXPORT_SYMBOL(nvram_sync);
-
-#endif /* CONFIG_NVRAM */
-
-static struct cpu cpu_devices[NR_CPUS];
-
-int __init ppc_init(void)
-{
-	int i;
-
-	/* clear the progress line */
-	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
-
-	/* register CPU devices */
-	for_each_possible_cpu(i)
-		register_cpu(&cpu_devices[i], i);
-
-	/* call platform init */
-	if (ppc_md.init != NULL) {
-		ppc_md.init();
-	}
-	return 0;
-}
-
-arch_initcall(ppc_init);
-
-/* Warning, IO base is not yet inited */
-void __init setup_arch(char **cmdline_p)
-{
-	extern char *klimit;
-	extern void do_init_bootmem(void);
-
-	/* so udelay does something sensible, assume <= 1000 bogomips */
-	loops_per_jiffy = 500000000 / HZ;
-
-	if (ppc_md.init_early)
-		ppc_md.init_early();
-
-#ifdef CONFIG_XMON
-	xmon_init(1);
-	if (strstr(cmd_line, "xmon"))
-		xmon(NULL);
-#endif /* CONFIG_XMON */
-	if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab);
-
-#if defined(CONFIG_KGDB)
-	if (ppc_md.kgdb_map_scc)
-		ppc_md.kgdb_map_scc();
-	set_debug_traps();
-	if (strstr(cmd_line, "gdb")) {
-		if (ppc_md.progress)
-			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
-		printk("kgdb breakpoint activated\n");
-		breakpoint();
-	}
-#endif
-
-	/*
-	 * Set cache line size based on type of cpu as a default.
-	 * Systems with OF can look in the properties on the cpu node(s)
-	 * for a possibly more accurate value.
-	 */
-	if (! cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE)) {
-		dcache_bsize = cur_cpu_spec->dcache_bsize;
-		icache_bsize = cur_cpu_spec->icache_bsize;
-		ucache_bsize = 0;
-	} else
-		ucache_bsize = dcache_bsize = icache_bsize
-			= cur_cpu_spec->dcache_bsize;
-
-	/* reboot on panic */
-	panic_timeout = 180;
-
-	init_mm.start_code = PAGE_OFFSET;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = (unsigned long) klimit;
-
-	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
-	*cmdline_p = cmd_line;
-
-	parse_early_param();
-
-	/* set up the bootmem stuff with available memory */
-	do_init_bootmem();
-	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
-
-#ifdef CONFIG_PPC_OCP
-	/* Initialize OCP device list */
-	ocp_early_init();
-	if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
-#endif
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-	ppc_md.setup_arch();
-	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
-
-	paging_init();
-}
diff --git a/arch/ppc/kernel/smp-tbsync.c b/arch/ppc/kernel/smp-tbsync.c
deleted file mode 100644
index d0cf3f86931d..000000000000
--- a/arch/ppc/kernel/smp-tbsync.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Smp timebase synchronization for ppc.
- *
- * Copyright (C) 2003 Samuel Rydh (samuel@ibrium.se)
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/unistd.h>
-#include <linux/init.h>
-#include <asm/atomic.h>
-#include <asm/smp.h>
-#include <asm/time.h>
-
-#define NUM_ITER		300
-
-enum {
-	kExit=0, kSetAndTest, kTest
-};
-
-static struct {
-	volatile int		tbu;
-	volatile int		tbl;
-	volatile int		mark;
-	volatile int		cmd;
-	volatile int		handshake;
-	int			filler[3];
-
-	volatile int		ack;
-	int			filler2[7];
-
-	volatile int		race_result;
-} *tbsync;
-
-static volatile int		running;
-
-static void __devinit
-enter_contest( int mark, int add )
-{
-	while( (int)(get_tbl() - mark) < 0 )
-		tbsync->race_result = add;
-}
-
-void __devinit
-smp_generic_take_timebase( void )
-{
-	int cmd, tbl, tbu;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	while( !running )
-		;
-	rmb();
-
-	for( ;; ) {
-		tbsync->ack = 1;
-		while( !tbsync->handshake )
-			;
-		rmb();
-
-		cmd = tbsync->cmd;
-		tbl = tbsync->tbl;
-		tbu = tbsync->tbu;
-		tbsync->ack = 0;
-		if( cmd == kExit )
-			break;
-
-		if( cmd == kSetAndTest ) {
-			while( tbsync->handshake )
-				;
-			asm volatile ("mttbl %0" :: "r" (tbl) );
-			asm volatile ("mttbu %0" :: "r" (tbu) );
-		} else {
-			while( tbsync->handshake )
-				;
-		}
-		enter_contest( tbsync->mark, -1 );
-	}
-	local_irq_restore(flags);
-}
-
-static int __devinit
-start_contest( int cmd, int offset, int num )
-{
-	int i, tbu, tbl, mark, score=0;
-
-	tbsync->cmd = cmd;
-
-	local_irq_disable();
-	for( i=-3; i<num; ) {
-		tbl = get_tbl() + 400;
-		tbsync->tbu = tbu = get_tbu();
-		tbsync->tbl = tbl + offset;
-		tbsync->mark = mark = tbl + 400;
-
-		wmb();
-
-		tbsync->handshake = 1;
-		while( tbsync->ack )
-			;
-
-		while( (int)(get_tbl() - tbl) <= 0 )
-			;
-		tbsync->handshake = 0;
-		enter_contest( mark, 1 );
-
-		while( !tbsync->ack )
-			;
-
-		if( tbsync->tbu != get_tbu() || ((tbsync->tbl ^ get_tbl()) & 0x80000000) )
-			continue;
-		if( i++ > 0 )
-			score += tbsync->race_result;
-	}
-	local_irq_enable();
-	return score;
-}
-
-void __devinit
-smp_generic_give_timebase( void )
-{
-	int i, score, score2, old, min=0, max=5000, offset=1000;
-
-	printk("Synchronizing timebase\n");
-
-	/* if this fails then this kernel won't work anyway... */
-	tbsync = kzalloc( sizeof(*tbsync), GFP_KERNEL );
-	mb();
-	running = 1;
-
-	while( !tbsync->ack )
-		;
-
-	/* binary search */
-	for( old=-1 ; old != offset ; offset=(min+max)/2 ) {
-		score = start_contest( kSetAndTest, offset, NUM_ITER );
-
-		printk("score %d, offset %d\n", score, offset );
-
-		if( score > 0 )
-			max = offset;
-		else
-			min = offset;
-		old = offset;
-	}
-	score = start_contest( kSetAndTest, min, NUM_ITER );
-	score2 = start_contest( kSetAndTest, max, NUM_ITER );
-
-	printk( "Min %d (score %d), Max %d (score %d)\n", min, score, max, score2 );
-	score = abs( score );
-	score2 = abs( score2 );
-	offset = (score < score2) ? min : max;
-
-	/* guard against inaccurate mttb */
-	for( i=0; i<10; i++ ) {
-		start_contest( kSetAndTest, offset, NUM_ITER/10 );
-
-		if( (score2=start_contest(kTest, offset, NUM_ITER)) < 0 )
-			score2 = -score2;
-		if( score2 <= score || score2 < 20 )
-			break;
-	}
-	printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER );
-
-	/* exiting */
-	tbsync->cmd = kExit;
-	wmb();
-	tbsync->handshake = 1;
-	while( tbsync->ack )
-		;
-	tbsync->handshake = 0;
-	kfree( tbsync );
-	tbsync = NULL;
-	running = 0;
-
-	/* all done */
-	smp_tb_synchronized = 1;
-}
diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c
deleted file mode 100644
index 055998575cb4..000000000000
--- a/arch/ppc/kernel/smp.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * Smp support for ppc.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
- * deal of code from the sparc and intel versions.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/residual.h>
-#include <asm/time.h>
-#include <asm/thread_info.h>
-#include <asm/tlbflush.h>
-#include <asm/xmon.h>
-#include <asm/machdep.h>
-
-volatile int smp_commenced;
-int smp_tb_synchronized;
-struct cpuinfo_PPC cpu_data[NR_CPUS];
-atomic_t ipi_recv;
-atomic_t ipi_sent;
-cpumask_t cpu_online_map;
-cpumask_t cpu_possible_map;
-int smp_hw_index[NR_CPUS];
-struct thread_info *secondary_ti;
-static struct task_struct *idle_tasks[NR_CPUS];
-
-EXPORT_SYMBOL(cpu_online_map);
-EXPORT_SYMBOL(cpu_possible_map);
-
-/* SMP operations for this machine */
-struct smp_ops_t *smp_ops;
-
-/* all cpu mappings are 1-1 -- Cort */
-volatile unsigned long cpu_callin_map[NR_CPUS];
-
-int start_secondary(void *);
-void smp_call_function_interrupt(void);
-static int __smp_call_function(void (*func) (void *info), void *info,
-			       int wait, int target);
-
-/* Low level assembly function used to backup CPU 0 state */
-extern void __save_cpu_setup(void);
-
-/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
- *
- * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
- * in /proc/interrupts will be wrong!!! --Troy */
-#define PPC_MSG_CALL_FUNCTION	0
-#define PPC_MSG_RESCHEDULE	1
-#define PPC_MSG_INVALIDATE_TLB	2
-#define PPC_MSG_XMON_BREAK	3
-
-static inline void
-smp_message_pass(int target, int msg)
-{
-	if (smp_ops) {
-		atomic_inc(&ipi_sent);
-		smp_ops->message_pass(target, msg);
-	}
-}
-
-/*
- * Common functions
- */
-void smp_message_recv(int msg)
-{
-	atomic_inc(&ipi_recv);
-
-	switch( msg ) {
-	case PPC_MSG_CALL_FUNCTION:
-		smp_call_function_interrupt();
-		break;
-	case PPC_MSG_RESCHEDULE:
-		set_need_resched();
-		break;
-	case PPC_MSG_INVALIDATE_TLB:
-		_tlbia();
-		break;
-#ifdef CONFIG_XMON
-	case PPC_MSG_XMON_BREAK:
-		xmon(get_irq_regs());
-		break;
-#endif /* CONFIG_XMON */
-	default:
-		printk("SMP %d: smp_message_recv(): unknown msg %d\n",
-		       smp_processor_id(), msg);
-		break;
-	}
-}
-
-/*
- * 750's don't broadcast tlb invalidates so
- * we have to emulate that behavior.
- *   -- Cort
- */
-void smp_send_tlb_invalidate(int cpu)
-{
-	if ( PVR_VER(mfspr(SPRN_PVR)) == 8 )
-		smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_INVALIDATE_TLB);
-}
-
-void smp_send_reschedule(int cpu)
-{
-	/*
-	 * This is only used if `cpu' is running an idle task,
-	 * so it will reschedule itself anyway...
-	 *
-	 * This isn't the case anymore since the other CPU could be
-	 * sleeping and won't reschedule until the next interrupt (such
-	 * as the timer).
-	 *  -- Cort
-	 */
-	/* This is only used if `cpu' is running an idle task,
-	   so it will reschedule itself anyway... */
-	smp_message_pass(cpu, PPC_MSG_RESCHEDULE);
-}
-
-#ifdef CONFIG_XMON
-void smp_send_xmon_break(int cpu)
-{
-	smp_message_pass(cpu, PPC_MSG_XMON_BREAK);
-}
-#endif /* CONFIG_XMON */
-
-static void stop_this_cpu(void *dummy)
-{
-	local_irq_disable();
-	while (1)
-		;
-}
-
-void smp_send_stop(void)
-{
-	smp_call_function(stop_this_cpu, NULL, 1, 0);
-}
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- * Stolen from the i386 version.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-static struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-} *call_data;
-
-/*
- * this function sends a 'generic call function' IPI to all other CPUs
- * in the system.
- */
-
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-		      int wait)
-/*
- * [SUMMARY] Run a function on all other CPUs.
- * <func> The function to run. This must be fast and non-blocking.
- * <info> An arbitrary pointer to pass to the function.
- * <nonatomic> currently unused.
- * <wait> If true, wait (atomically) until function has completed on other CPUs.
- * [RETURNS] 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-{
-	/* FIXME: get cpu lock with hotplug cpus, or change this to
-           bitmask. --RR */
-	if (num_online_cpus() <= 1)
-		return 0;
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-	return __smp_call_function(func, info, wait, MSG_ALL_BUT_SELF);
-}
-
-static int __smp_call_function(void (*func) (void *info), void *info,
-			       int wait, int target)
-{
-	struct call_data_struct data;
-	int ret = -1;
-	int timeout;
-	int ncpus = 1;
-
-	if (target == MSG_ALL_BUT_SELF)
-		ncpus = num_online_cpus() - 1;
-	else if (target == MSG_ALL)
-		ncpus = num_online_cpus();
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	spin_lock(&call_lock);
-	call_data = &data;
-	/* Send a message to all other CPUs and wait for them to respond */
-	smp_message_pass(target, PPC_MSG_CALL_FUNCTION);
-
-	/* Wait for response */
-	timeout = 1000000;
-	while (atomic_read(&data.started) != ncpus) {
-		if (--timeout == 0) {
-			printk("smp_call_function on cpu %d: other cpus not responding (%d)\n",
-			       smp_processor_id(), atomic_read(&data.started));
-			goto out;
-		}
-		barrier();
-		udelay(1);
-	}
-
-	if (wait) {
-		timeout = 1000000;
-		while (atomic_read(&data.finished) != ncpus) {
-			if (--timeout == 0) {
-				printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n",
-				       smp_processor_id(), atomic_read(&data.finished), atomic_read(&data.started));
-				goto out;
-			}
-			barrier();
-			udelay(1);
-		}
-	}
-	ret = 0;
-
- out:
-	spin_unlock(&call_lock);
-	return ret;
-}
-
-void smp_call_function_interrupt(void)
-{
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
-	(*func)(info);
-	if (wait)
-		atomic_inc(&call_data->finished);
-}
-
-static void __devinit smp_store_cpu_info(int id)
-{
-        struct cpuinfo_PPC *c = &cpu_data[id];
-
-	/* assume bogomips are same for everything */
-        c->loops_per_jiffy = loops_per_jiffy;
-        c->pvr = mfspr(SPRN_PVR);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	int num_cpus, i, cpu;
-	struct task_struct *p;
-
-	/* Fixup boot cpu */
-        smp_store_cpu_info(smp_processor_id());
-	cpu_callin_map[smp_processor_id()] = 1;
-
-	if (smp_ops == NULL) {
-		printk("SMP not supported on this machine.\n");
-		return;
-	}
-
-	/* Probe platform for CPUs: always linear. */
-	num_cpus = smp_ops->probe();
-	
-	if (num_cpus < 2)
-		smp_tb_synchronized = 1;
-	
-	for (i = 0; i < num_cpus; ++i)
-		cpu_set(i, cpu_possible_map);
-
-	/* Backup CPU 0 state */
-	__save_cpu_setup();
-
-	for_each_possible_cpu(cpu) {
-		if (cpu == smp_processor_id())
-			continue;
-		/* create a process for the processor */
-		p = fork_idle(cpu);
-		if (IS_ERR(p))
-			panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
-		task_thread_info(p)->cpu = cpu;
-		idle_tasks[cpu] = p;
-	}
-}
-
-void __devinit smp_prepare_boot_cpu(void)
-{
-	cpu_set(smp_processor_id(), cpu_online_map);
-	cpu_set(smp_processor_id(), cpu_possible_map);
-}
-
-int __init setup_profiling_timer(unsigned int multiplier)
-{
-	return 0;
-}
-
-/* Processor coming up starts here */
-int __devinit start_secondary(void *unused)
-{
-	int cpu;
-
-	atomic_inc(&init_mm.mm_count);
-	current->active_mm = &init_mm;
-
-	cpu = smp_processor_id();
-        smp_store_cpu_info(cpu);
-	set_dec(tb_ticks_per_jiffy);
-	preempt_disable();
-	cpu_callin_map[cpu] = 1;
-
-	printk("CPU %d done callin...\n", cpu);
-	smp_ops->setup_cpu(cpu);
-	printk("CPU %d done setup...\n", cpu);
-	smp_ops->take_timebase();
-	printk("CPU %d done timebase take...\n", cpu);
-
-	spin_lock(&call_lock);
-	cpu_set(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
-
-	local_irq_enable();
-
-	cpu_idle();
-	return 0;
-}
-
-int __cpu_up(unsigned int cpu)
-{
-	char buf[32];
-	int c;
-
-	secondary_ti = task_thread_info(idle_tasks[cpu]);
-	mb();
-
-	/*
-	 * There was a cache flush loop here to flush the cache
-	 * to memory for the first 8MB of RAM.  The cache flush
-	 * has been pushed into the kick_cpu function for those
-	 * platforms that need it.
-	 */
-
-	/* wake up cpu */
-	smp_ops->kick_cpu(cpu);
-	
-	/*
-	 * wait to see if the cpu made a callin (is actually up).
-	 * use this value that I found through experimentation.
-	 * -- Cort
-	 */
-	for (c = 1000; c && !cpu_callin_map[cpu]; c--)
-		udelay(100);
-
-	if (!cpu_callin_map[cpu]) {
-		sprintf(buf, "didn't find cpu %u", cpu);
-		if (ppc_md.progress) ppc_md.progress(buf, 0x360+cpu);
-		printk("Processor %u is stuck.\n", cpu);
-		return -ENOENT;
-	}
-
-	sprintf(buf, "found cpu %u", cpu);
-	if (ppc_md.progress) ppc_md.progress(buf, 0x350+cpu);
-	printk("Processor %d found.\n", cpu);
-
-	smp_ops->give_timebase();
-
-	/* Wait until cpu puts itself in the online map */
-	while (!cpu_online(cpu))
-		cpu_relax();
-
-	return 0;
-}
-
-void smp_cpus_done(unsigned int max_cpus)
-{
-	smp_ops->setup_cpu(0);
-}
diff --git a/arch/ppc/kernel/softemu8xx.c b/arch/ppc/kernel/softemu8xx.c
deleted file mode 100644
index 9bbb6bf7b645..000000000000
--- a/arch/ppc/kernel/softemu8xx.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Software emulation of some PPC instructions for the 8xx core.
- *
- * Copyright (C) 1998 Dan Malek (dmalek@jlc.net)
- *
- * Software floating emuation for the MPC8xx processor.  I did this mostly
- * because it was easier than trying to get the libraries compiled for
- * software floating point.  The goal is still to get the libraries done,
- * but I lost patience and needed some hacks to at least get init and
- * shells running.  The first problem is the setjmp/longjmp that save
- * and restore the floating point registers.
- *
- * For this emulation, our working registers are found on the register
- * save area.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-
-extern void
-print_8xx_pte(struct mm_struct *mm, unsigned long addr);
-extern int
-get_8xx_pte(struct mm_struct *mm, unsigned long addr);
-
-/* Eventually we may need a look-up table, but this works for now.
-*/
-#define LFS	48
-#define LFD	50
-#define LFDU	51
-#define STFD	54
-#define STFDU	55
-#define FMR	63
-
-/*
- * We return 0 on success, 1 on unimplemented instruction, and EFAULT
- * if a load/store faulted.
- */
-int
-Soft_emulate_8xx(struct pt_regs *regs)
-{
-	uint	inst, instword;
-	uint	flreg, idxreg, disp;
-	uint	retval;
-	signed short sdisp;
-	uint	*ea, *ip;
-
-	retval = 0;
-
-	instword = *((uint *)regs->nip);
-	inst = instword >> 26;
-
-	flreg = (instword >> 21) & 0x1f;
-	idxreg = (instword >> 16) & 0x1f;
-	disp = instword & 0xffff;
-
-	ea = (uint *)(regs->gpr[idxreg] + disp);
-	ip = (uint *)&current->thread.fpr[flreg];
-
-	switch ( inst )
-	{
-	case LFD:
-		/* this is a 16 bit quantity that is sign extended
-		 * so use a signed short here -- Cort
-		 */
-		sdisp = (instword & 0xffff);
-		ea = (uint *)(regs->gpr[idxreg] + sdisp);
-		if (copy_from_user(ip, ea, sizeof(double)))
-			retval = -EFAULT;
-		break;
-		
-	case LFDU:
-		if (copy_from_user(ip, ea, sizeof(double)))
-			retval = -EFAULT;
-		else
-			regs->gpr[idxreg] = (uint)ea;
-		break;
-	case LFS:
-		sdisp = (instword & 0xffff);
-		ea = (uint *)(regs->gpr[idxreg] + sdisp);
-		if (copy_from_user(ip, ea, sizeof(float)))
-			retval = -EFAULT;
-		break;
-	case STFD:
-		/* this is a 16 bit quantity that is sign extended
-		 * so use a signed short here -- Cort
-		 */
-		sdisp = (instword & 0xffff);
-		ea = (uint *)(regs->gpr[idxreg] + sdisp);
-		if (copy_to_user(ea, ip, sizeof(double)))
-			retval = -EFAULT;
-		break;
-
-	case STFDU:
-		if (copy_to_user(ea, ip, sizeof(double)))
-			retval = -EFAULT;
-		else
-			regs->gpr[idxreg] = (uint)ea;
-		break;
-	case FMR:
-		/* assume this is a fp move -- Cort */
-		memcpy( ip, &current->thread.fpr[(instword>>11)&0x1f],
-			sizeof(double) );
-		break;
-	default:
-		retval = 1;
-		printk("Bad emulation %s/%d\n"
-		       " NIP: %08lx instruction: %08x opcode: %x "
-		       "A: %x B: %x C: %x code: %x rc: %x\n",
-		       current->comm,current->pid,
-		       regs->nip,
-		       instword,inst,
-		       (instword>>16)&0x1f,
-		       (instword>>11)&0x1f,
-		       (instword>>6)&0x1f,
-		       (instword>>1)&0x3ff,
-		       instword&1);
-		{
-			int pa;
-			print_8xx_pte(current->mm,regs->nip);
-			pa = get_8xx_pte(current->mm,regs->nip) & PAGE_MASK;
-			pa |= (regs->nip & ~PAGE_MASK);
-			pa = (unsigned long)__va(pa);
-			printk("Kernel VA for NIP %x ", pa);
-			print_8xx_pte(current->mm,pa);
-		}
-		
-	}
-
-	if (retval == 0)
-		regs->nip += 4;
-	return(retval);
-}
-
diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c
deleted file mode 100644
index 18ee851e33e3..000000000000
--- a/arch/ppc/kernel/time.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * Common time routines among all ppc machines.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) to merge
- * Paul Mackerras' version and mine for PReP and Pmac.
- * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net).
- *
- * First round of bugfixes by Gabriel Paubert (paubert@iram.es)
- * to make clock more stable (2.4.0-test5). The only thing
- * that this code assumes is that the timebases have been synchronized
- * by firmware on SMP and are never stopped (never do sleep
- * on SMP then, nap and doze are OK).
- *
- * TODO (not necessarily in this file):
- * - improve precision and reproducibility of timebase frequency
- * measurement at boot time.
- * - get rid of xtime_lock for gettimeofday (generic kernel problem
- * to be implemented on all architectures for SMP scalability and
- * eventually implementing gettimeofday without entering the kernel).
- * - put all time/clock related variables in a single structure
- * to minimize number of cache lines touched by gettimeofday()
- * - for astronomical applications: add a new function to get
- * non ambiguous timestamps even around leap seconds. This needs
- * a new timestamp format and a good name.
- *
- *
- * The following comment is partially obsolete (at least the long wait
- * is no more a valid reason):
- * Since the MPC8xx has a programmable interrupt timer, I decided to
- * use that rather than the decrementer.  Two reasons: 1.) the clock
- * frequency is low, causing 2.) a long wait in the timer interrupt
- *		while ((d = get_dec()) == dval)
- * loop.  The MPC8xx can be driven from a variety of input clocks,
- * so a number of assumptions have been made here because the kernel
- * parameter HZ is a constant.  We assume (correctly, today :-) that
- * the MPC8xx on the MBX board is driven from a 32.768 kHz crystal.
- * This is then divided by 4, providing a 8192 Hz clock into the PIT.
- * Since it is not possible to get a nice 100 Hz clock out of this, without
- * creating a software PLL, I have set HZ to 128.  -- Dan
- *
- * 1997-09-10  Updated NTP code according to technical memorandum Jan '96
- *             "A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-#include <asm/nvram.h>
-#include <asm/cache.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-#include <asm/irq_regs.h>
-
-#include <asm/time.h>
-
-unsigned long disarm_decr[NR_CPUS];
-
-extern struct timezone sys_tz;
-
-/* keep track of when we need to update the rtc */
-time_t last_rtc_update;
-
-/* The decrementer counts down by 128 every 128ns on a 601. */
-#define DECREMENTER_COUNT_601	(1000000000 / HZ)
-
-unsigned tb_ticks_per_jiffy;
-unsigned tb_to_us;
-unsigned tb_last_stamp;
-unsigned long tb_to_ns_scale;
-
-/* used for timezone offset */
-static long timezone_offset;
-
-DEFINE_SPINLOCK(rtc_lock);
-
-EXPORT_SYMBOL(rtc_lock);
-
-/* Timer interrupt helper function */
-static inline int tb_delta(unsigned *jiffy_stamp) {
-	int delta;
-	if (__USE_RTC()) {
-		delta = get_rtcl();
-		if (delta < *jiffy_stamp) *jiffy_stamp -= 1000000000;
-		delta -= *jiffy_stamp;
-	} else {
-		delta = get_tbl() - *jiffy_stamp;
-	}
-	return delta;
-}
-
-#ifdef CONFIG_SMP
-unsigned long profile_pc(struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-
-	if (in_lock_functions(pc))
-		return regs->link;
-
-	return pc;
-}
-EXPORT_SYMBOL(profile_pc);
-#endif
-
-void wakeup_decrementer(void)
-{
-	set_dec(tb_ticks_per_jiffy);
-	/* No currently-supported powerbook has a 601,
-	 * so use get_tbl, not native
-	 */
-	last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
-}
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * We set it up to overflow again in 1/HZ seconds.
- */
-void timer_interrupt(struct pt_regs * regs)
-{
-	struct pt_regs *old_regs;
-	int next_dec;
-	unsigned long cpu = smp_processor_id();
-	unsigned jiffy_stamp = last_jiffy_stamp(cpu);
-	extern void do_IRQ(struct pt_regs *);
-
-	if (atomic_read(&ppc_n_lost_interrupts) != 0)
-		do_IRQ(regs);
-
-	old_regs = set_irq_regs(regs);
-	irq_enter();
-
-	while ((next_dec = tb_ticks_per_jiffy - tb_delta(&jiffy_stamp)) <= 0) {
-		jiffy_stamp += tb_ticks_per_jiffy;
-		
-		profile_tick(CPU_PROFILING);
-		update_process_times(user_mode(regs));
-
-	  	if (smp_processor_id())
-			continue;
-
-		/* We are in an interrupt, no need to save/restore flags */
-		write_seqlock(&xtime_lock);
-		tb_last_stamp = jiffy_stamp;
-		do_timer(1);
-
-		/*
-		 * update the rtc when needed, this should be performed on the
-		 * right fraction of a second. Half or full second ?
-		 * Full second works on mk48t59 clocks, others need testing.
-		 * Note that this update is basically only used through
-		 * the adjtimex system calls. Setting the HW clock in
-		 * any other way is a /dev/rtc and userland business.
-		 * This is still wrong by -0.5/+1.5 jiffies because of the
-		 * timer interrupt resolution and possible delay, but here we
-		 * hit a quantization limit which can only be solved by higher
-		 * resolution timers and decoupling time management from timer
-		 * interrupts. This is also wrong on the clocks
-		 * which require being written at the half second boundary.
-		 * We should have an rtc call that only sets the minutes and
-		 * seconds like on Intel to avoid problems with non UTC clocks.
-		 */
-		if ( ppc_md.set_rtc_time && ntp_synced() &&
-		     xtime.tv_sec - last_rtc_update >= 659 &&
-		     abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ) {
-		  	if (ppc_md.set_rtc_time(xtime.tv_sec+1 + timezone_offset) == 0)
-				last_rtc_update = xtime.tv_sec+1;
-			else
-				/* Try again one minute later */
-				last_rtc_update += 60;
-		}
-		write_sequnlock(&xtime_lock);
-	}
-	if ( !disarm_decr[smp_processor_id()] )
-		set_dec(next_dec);
-	last_jiffy_stamp(cpu) = jiffy_stamp;
-
-	if (ppc_md.heartbeat && !ppc_md.heartbeat_count--)
-		ppc_md.heartbeat();
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
-/*
- * This version of gettimeofday has microsecond resolution.
- */
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned delta, usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		sec = xtime.tv_sec;
-		usec = (xtime.tv_nsec / 1000);
-		delta = tb_ticks_since(tb_last_stamp);
-#ifdef CONFIG_SMP
-		/* As long as timebases are not in sync, gettimeofday can only
-		 * have jiffy resolution on SMP.
-		 */
-		if (!smp_tb_synchronized)
-			delta = 0;
-#endif /* CONFIG_SMP */
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	usec += mulhwu(tb_to_us, delta);
-	while (usec >= 1000000) {
-	  	sec++;
-		usec -= 1000000;
-	}
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, new_sec = tv->tv_sec;
-	long wtm_nsec, new_nsec = tv->tv_nsec;
-	unsigned long flags;
-	int tb_delta;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irqsave(&xtime_lock, flags);
-	/* Updating the RTC is not the job of this code. If the time is
-	 * stepped under NTP, the RTC will be update after STA_UNSYNC
-	 * is cleared. Tool like clock/hwclock either copy the RTC
-	 * to the system time, in which case there is no point in writing
-	 * to the RTC again, or write to the RTC but then they don't call
-	 * settimeofday to perform this operation. Note also that
-	 * we don't touch the decrementer since:
-	 * a) it would lose timer interrupt synchronization on SMP
-	 * (if it is working one day)
-	 * b) it could make one jiffy spuriously shorter or longer
-	 * which would introduce another source of uncertainty potentially
-	 * harmful to relatively short timers.
-	 */
-
-	/* This works perfectly on SMP only if the tb are in sync but
-	 * guarantees an error < 1 jiffy even if they are off by eons,
-	 * still reasonable when gettimeofday resolution is 1 jiffy.
-	 */
-	tb_delta = tb_ticks_since(last_jiffy_stamp(smp_processor_id()));
-
-	new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta);
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
-
-	set_normalized_timespec(&xtime, new_sec, new_nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	/* In case of a large backwards jump in time with NTP, we want the
-	 * clock to be updated as soon as the PLL is again in lock.
-	 */
-	last_rtc_update = new_sec - 658;
-
-	ntp_clear();
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-/* This function is only called on the boot processor */
-void __init time_init(void)
-{
-	time_t sec, old_sec;
-	unsigned old_stamp, stamp, elapsed;
-
-        if (ppc_md.time_init != NULL)
-                timezone_offset = ppc_md.time_init();
-
-	if (__USE_RTC()) {
-		/* 601 processor: dec counts down by 128 every 128ns */
-		tb_ticks_per_jiffy = DECREMENTER_COUNT_601;
-		/* mulhwu_scale_factor(1000000000, 1000000) is 0x418937 */
-		tb_to_us = 0x418937;
-        } else {
-                ppc_md.calibrate_decr();
-		tb_to_ns_scale = mulhwu(tb_to_us, 1000 << 10);
-	}
-
-	/* Now that the decrementer is calibrated, it can be used in case the
-	 * clock is stuck, but the fact that we have to handle the 601
-	 * makes things more complex. Repeatedly read the RTC until the
-	 * next second boundary to try to achieve some precision.  If there
-	 * is no RTC, we still need to set tb_last_stamp and
-	 * last_jiffy_stamp(cpu 0) to the current stamp.
-	 */
-	stamp = get_native_tbl();
-	if (ppc_md.get_rtc_time) {
-		sec = ppc_md.get_rtc_time();
-		elapsed = 0;
-		do {
-			old_stamp = stamp;
-			old_sec = sec;
-			stamp = get_native_tbl();
-			if (__USE_RTC() && stamp < old_stamp)
-				old_stamp -= 1000000000;
-			elapsed += stamp - old_stamp;
-			sec = ppc_md.get_rtc_time();
-		} while ( sec == old_sec && elapsed < 2*HZ*tb_ticks_per_jiffy);
-		if (sec==old_sec)
-			printk("Warning: real time clock seems stuck!\n");
-		xtime.tv_sec = sec;
-		xtime.tv_nsec = 0;
-		/* No update now, we just read the time from the RTC ! */
-		last_rtc_update = xtime.tv_sec;
-	}
-	last_jiffy_stamp(0) = tb_last_stamp = stamp;
-
-	/* Not exact, but the timer interrupt takes care of this */
-	set_dec(tb_ticks_per_jiffy);
-
-	/* If platform provided a timezone (pmac), we correct the time */
-        if (timezone_offset) {
-		sys_tz.tz_minuteswest = -timezone_offset / 60;
-		sys_tz.tz_dsttime = 0;
-		xtime.tv_sec -= timezone_offset;
-        }
-        set_normalized_timespec(&wall_to_monotonic,
-                                -xtime.tv_sec, -xtime.tv_nsec);
-}
-
-#define FEBRUARY		2
-#define	STARTOFTIME		1970
-#define SECDAY			86400L
-#define SECYR			(SECDAY * 365)
-
-/*
- * Note: this is wrong for 2100, but our signed 32-bit time_t will
- * have overflowed long before that, so who cares.  -- paulus
- */
-#define	leapyear(year)		((year) % 4 == 0)
-#define	days_in_year(a) 	(leapyear(a) ? 366 : 365)
-#define	days_in_month(a) 	(month_days[(a) - 1])
-
-static int month_days[12] = {
-	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-void to_tm(int tim, struct rtc_time * tm)
-{
-	register int i;
-	register long hms, day, gday;
-
-	gday = day = tim / SECDAY;
-	hms = tim % SECDAY;
-
-	/* Hours, minutes, seconds are easy */
-	tm->tm_hour = hms / 3600;
-	tm->tm_min = (hms % 3600) / 60;
-	tm->tm_sec = (hms % 3600) % 60;
-
-	/* Number of years in days */
-	for (i = STARTOFTIME; day >= days_in_year(i); i++)
-		day -= days_in_year(i);
-	tm->tm_year = i;
-
-	/* Number of months in days left */
-	if (leapyear(tm->tm_year))
-		days_in_month(FEBRUARY) = 29;
-	for (i = 1; day >= days_in_month(i); i++)
-		day -= days_in_month(i);
-	days_in_month(FEBRUARY) = 28;
-	tm->tm_mon = i;
-
-	/* Days are what is left over (+1) from all that. */
-	tm->tm_mday = day + 1;
-
-	/*
-	 * Determine the day of week. Jan. 1, 1970 was a Thursday.
-	 */
-	tm->tm_wday = (gday + 4) % 7;
-}
-
-/* Auxiliary function to compute scaling factors */
-/* Actually the choice of a timebase running at 1/4 the of the bus
- * frequency giving resolution of a few tens of nanoseconds is quite nice.
- * It makes this computation very precise (27-28 bits typically) which
- * is optimistic considering the stability of most processor clock
- * oscillators and the precision with which the timebase frequency
- * is measured but does not harm.
- */
-unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) {
-	unsigned mlt=0, tmp, err;
-	/* No concern for performance, it's done once: use a stupid
-	 * but safe and compact method to find the multiplier.
-	 */
-	for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
-		if (mulhwu(inscale, mlt|tmp) < outscale) mlt|=tmp;
-	}
-	/* We might still be off by 1 for the best approximation.
-	 * A side effect of this is that if outscale is too large
-	 * the returned value will be zero.
-	 * Many corner cases have been checked and seem to work,
-	 * some might have been forgotten in the test however.
-	 */
-	err = inscale*(mlt+1);
-	if (err <= inscale/2) mlt++;
-	return mlt;
-}
-
-unsigned long long sched_clock(void)
-{
-	unsigned long lo, hi, hi2;
-	unsigned long long tb;
-
-	if (!__USE_RTC()) {
-		do {
-			hi = get_tbu();
-			lo = get_tbl();
-			hi2 = get_tbu();
-		} while (hi2 != hi);
-		tb = ((unsigned long long) hi << 32) | lo;
-		tb = (tb * tb_to_ns_scale) >> 10;
-	} else {
-		do {
-			hi = get_rtcu();
-			lo = get_rtcl();
-			hi2 = get_rtcu();
-		} while (hi2 != hi);
-		tb = ((unsigned long long) hi) * 1000000000 + lo;
-	}
-	return tb;
-}
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
deleted file mode 100644
index a467a429c2fe..000000000000
--- a/arch/ppc/kernel/traps.c
+++ /dev/null
@@ -1,826 +0,0 @@
-/*
- *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  and Paul Mackerras (paulus@cs.anu.edu.au)
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/prctl.h>
-#include <linux/bug.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/reg.h>
-#include <asm/xmon.h>
-#include <asm/pmc.h>
-
-#ifdef CONFIG_XMON
-extern int xmon_bpt(struct pt_regs *regs);
-extern int xmon_sstep(struct pt_regs *regs);
-extern int xmon_iabr_match(struct pt_regs *regs);
-extern int xmon_dabr_match(struct pt_regs *regs);
-
-int (*debugger)(struct pt_regs *regs) = xmon;
-int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
-int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
-int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
-int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#else
-#ifdef CONFIG_KGDB
-int (*debugger)(struct pt_regs *regs);
-int (*debugger_bpt)(struct pt_regs *regs);
-int (*debugger_sstep)(struct pt_regs *regs);
-int (*debugger_iabr_match)(struct pt_regs *regs);
-int (*debugger_dabr_match)(struct pt_regs *regs);
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#else
-#define debugger(regs)			do { } while (0)
-#define debugger_bpt(regs)		0
-#define debugger_sstep(regs)		0
-#define debugger_iabr_match(regs)	0
-#define debugger_dabr_match(regs)	0
-#define debugger_fault_handler		((void (*)(struct pt_regs *))0)
-#endif
-#endif
-
-/*
- * Trap & Exception support
- */
-
-DEFINE_SPINLOCK(die_lock);
-
-int die(const char * str, struct pt_regs * fp, long err)
-{
-	static int die_counter;
-	int nl = 0;
-	console_verbose();
-	spin_lock_irq(&die_lock);
-	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
-#ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
-	nl = 1;
-#endif
-#ifdef CONFIG_SMP
-	printk("SMP NR_CPUS=%d ", NR_CPUS);
-	nl = 1;
-#endif
-	if (nl)
-		printk("\n");
-	show_regs(fp);
-	add_taint(TAINT_DIE);
-	spin_unlock_irq(&die_lock);
-	/* do_exit() should take care of panic'ing from an interrupt
-	 * context so we don't handle it here
-	 */
-	do_exit(err);
-}
-
-void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
-{
-	siginfo_t info;
-
-	if (!user_mode(regs)) {
-		debugger(regs);
-		die("Exception in kernel mode", regs, signr);
-	}
-	info.si_signo = signr;
-	info.si_errno = 0;
-	info.si_code = code;
-	info.si_addr = (void __user *) addr;
-	force_sig_info(signr, &info, current);
-
-	/*
-	 * Init gets no signals that it doesn't have a handler for.
-	 * That's all very well, but if it has caused a synchronous
-	 * exception and we ignore the resulting signal, it will just
-	 * generate the same exception over and over again and we get
-	 * nowhere.  Better to kill it and let the kernel panic.
-	 */
-	if (is_global_init(current)) {
-		__sighandler_t handler;
-
-		spin_lock_irq(&current->sighand->siglock);
-		handler = current->sighand->action[signr-1].sa.sa_handler;
-		spin_unlock_irq(&current->sighand->siglock);
-		if (handler == SIG_DFL) {
-			/* init has generated a synchronous exception
-			   and it doesn't have a handler for the signal */
-			printk(KERN_CRIT "init has generated signal %d "
-			       "but has no handler for it\n", signr);
-			do_exit(signr);
-		}
-	}
-}
-
-/*
- * I/O accesses can cause machine checks on powermacs.
- * Check if the NIP corresponds to the address of a sync
- * instruction for which there is an entry in the exception
- * table.
- * Note that the 601 only takes a machine check on TEA
- * (transfer error ack) signal assertion, and does not
- * set any of the top 16 bits of SRR1.
- *  -- paulus.
- */
-static inline int check_io_access(struct pt_regs *regs)
-{
-#if defined CONFIG_8xx
-	unsigned long msr = regs->msr;
-	const struct exception_table_entry *entry;
-	unsigned int *nip = (unsigned int *)regs->nip;
-
-	if (((msr & 0xffff0000) == 0 || (msr & (0x80000 | 0x40000)))
-	    && (entry = search_exception_tables(regs->nip)) != NULL) {
-		/*
-		 * Check that it's a sync instruction, or somewhere
-		 * in the twi; isync; nop sequence that inb/inw/inl uses.
-		 * As the address is in the exception table
-		 * we should be able to read the instr there.
-		 * For the debug message, we look at the preceding
-		 * load or store.
-		 */
-		if (*nip == 0x60000000)		/* nop */
-			nip -= 2;
-		else if (*nip == 0x4c00012c)	/* isync */
-			--nip;
-		/* eieio from I/O string functions */
-		else if ((*nip) == 0x7c0006ac || *(nip+1) == 0x7c0006ac)
-			nip += 2;
-		if (*nip == 0x7c0004ac || (*nip >> 26) == 3 ||
-			(*(nip+1) >> 26) == 3) {
-			/* sync or twi */
-			unsigned int rb;
-
-			--nip;
-			rb = (*nip >> 11) & 0x1f;
-			printk(KERN_DEBUG "%s bad port %lx at %p\n",
-			       (*nip & 0x100)? "OUT to": "IN from",
-			       regs->gpr[rb] - _IO_BASE, nip);
-			regs->msr |= MSR_RI;
-			regs->nip = entry->fixup;
-			return 1;
-		}
-	}
-#endif /* CONFIG_8xx */
-	return 0;
-}
-
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-/* On 4xx, the reason for the machine check or program exception
-   is in the ESR. */
-#define get_reason(regs)	((regs)->dsisr)
-#define get_mc_reason(regs)	((regs)->dsisr)
-#define REASON_FP		ESR_FP
-#define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
-#define REASON_PRIVILEGED	ESR_PPR
-#define REASON_TRAP		ESR_PTR
-
-/* single-step stuff */
-#define single_stepping(regs)	(current->thread.dbcr0 & DBCR0_IC)
-#define clear_single_step(regs)	(current->thread.dbcr0 &= ~DBCR0_IC)
-
-#else
-/* On non-4xx, the reason for the machine check or program
-   exception is in the MSR. */
-#define get_reason(regs)	((regs)->msr)
-#define get_mc_reason(regs)	((regs)->msr)
-#define REASON_FP		0x100000
-#define REASON_ILLEGAL		0x80000
-#define REASON_PRIVILEGED	0x40000
-#define REASON_TRAP		0x20000
-
-#define single_stepping(regs)	((regs)->msr & MSR_SE)
-#define clear_single_step(regs)	((regs)->msr &= ~MSR_SE)
-#endif
-
-/*
- * This is "fall-back" implementation for configurations
- * which don't provide platform-specific machine check info
- */
-void __attribute__ ((weak))
-platform_machine_check(struct pt_regs *regs)
-{
-}
-
-#if defined(CONFIG_4xx)
-int machine_check_4xx(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	if (reason & ESR_IMCP) {
-		printk("Instruction");
-		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
-	} else
-		printk("Data");
-	printk(" machine check in kernel mode.\n");
-
-	return 0;
-}
-
-int machine_check_440A(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	printk("Machine check in kernel mode.\n");
-	if (reason & ESR_IMCP){
-		printk("Instruction Synchronous Machine Check exception\n");
-		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
-	}
-	else {
-		u32 mcsr = mfspr(SPRN_MCSR);
-		if (mcsr & MCSR_IB)
-			printk("Instruction Read PLB Error\n");
-		if (mcsr & MCSR_DRB)
-			printk("Data Read PLB Error\n");
-		if (mcsr & MCSR_DWB)
-			printk("Data Write PLB Error\n");
-		if (mcsr & MCSR_TLBP)
-			printk("TLB Parity Error\n");
-		if (mcsr & MCSR_ICP){
-			flush_instruction_cache();
-			printk("I-Cache Parity Error\n");
-		}
-		if (mcsr & MCSR_DCSP)
-			printk("D-Cache Search Parity Error\n");
-		if (mcsr & MCSR_DCFP)
-			printk("D-Cache Flush Parity Error\n");
-		if (mcsr & MCSR_IMPE)
-			printk("Machine Check exception is imprecise\n");
-
-		/* Clear MCSR */
-		mtspr(SPRN_MCSR, mcsr);
-	}
-	return 0;
-}
-#else
-int machine_check_generic(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	printk("Machine check in kernel mode.\n");
-	printk("Caused by (from SRR1=%lx): ", reason);
-	switch (reason & 0x601F0000) {
-	case 0x80000:
-		printk("Machine check signal\n");
-		break;
-	case 0:		/* for 601 */
-	case 0x40000:
-	case 0x140000:	/* 7450 MSS error and TEA */
-		printk("Transfer error ack signal\n");
-		break;
-	case 0x20000:
-		printk("Data parity error signal\n");
-		break;
-	case 0x10000:
-		printk("Address parity error signal\n");
-		break;
-	case 0x20000000:
-		printk("L1 Data Cache error\n");
-		break;
-	case 0x40000000:
-		printk("L1 Instruction Cache error\n");
-		break;
-	case 0x00100000:
-		printk("L2 data cache parity error\n");
-		break;
-	default:
-		printk("Unknown values in msr\n");
-	}
-	return 0;
-}
-#endif /* everything else */
-
-void machine_check_exception(struct pt_regs *regs)
-{
-	int recover = 0;
-
-	if (cur_cpu_spec->machine_check)
-		recover = cur_cpu_spec->machine_check(regs);
-	if (recover > 0)
-		return;
-
-	if (user_mode(regs)) {
-		regs->msr |= MSR_RI;
-		_exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
-		return;
-	}
-
-#if defined(CONFIG_8xx) && defined(CONFIG_PCI)
-	/* the qspan pci read routines can cause machine checks -- Cort */
-	bad_page_fault(regs, regs->dar, SIGBUS);
-	return;
-#endif
-
-	if (debugger_fault_handler) {
-		debugger_fault_handler(regs);
-		regs->msr |= MSR_RI;
-		return;
-	}
-
-	if (check_io_access(regs))
-		return;
-
-	/*
-	 * Optional platform-provided routine to print out
-	 * additional info, e.g. bus error registers.
-	 */
-	platform_machine_check(regs);
-
-	debugger(regs);
-	die("machine check", regs, SIGBUS);
-}
-
-void SMIException(struct pt_regs *regs)
-{
-	debugger(regs);
-#if !(defined(CONFIG_XMON) || defined(CONFIG_KGDB))
-	show_regs(regs);
-	panic("System Management Interrupt");
-#endif
-}
-
-void unknown_exception(struct pt_regs *regs)
-{
-	printk("Bad trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
-	       regs->nip, regs->msr, regs->trap, print_tainted());
-	_exception(SIGTRAP, regs, 0, 0);
-}
-
-void instruction_breakpoint_exception(struct pt_regs *regs)
-{
-	if (debugger_iabr_match(regs))
-		return;
-	_exception(SIGTRAP, regs, TRAP_BRKPT, 0);
-}
-
-void RunModeException(struct pt_regs *regs)
-{
-	_exception(SIGTRAP, regs, 0, 0);
-}
-
-/* Illegal instruction emulation support.  Originally written to
- * provide the PVR to user applications using the mfspr rd, PVR.
- * Return non-zero if we can't emulate, or -EFAULT if the associated
- * memory access caused an access fault.  Return zero on success.
- *
- * There are a couple of ways to do this, either "decode" the instruction
- * or directly match lots of bits.  In this case, matching lots of
- * bits is faster and easier.
- *
- */
-#define INST_MFSPR_PVR		0x7c1f42a6
-#define INST_MFSPR_PVR_MASK	0xfc1fffff
-
-#define INST_DCBA		0x7c0005ec
-#define INST_DCBA_MASK		0x7c0007fe
-
-#define INST_MCRXR		0x7c000400
-#define INST_MCRXR_MASK		0x7c0007fe
-
-#define INST_STRING		0x7c00042a
-#define INST_STRING_MASK	0x7c0007fe
-#define INST_STRING_GEN_MASK	0x7c00067e
-#define INST_LSWI		0x7c0004aa
-#define INST_LSWX		0x7c00042a
-#define INST_STSWI		0x7c0005aa
-#define INST_STSWX		0x7c00052a
-
-static int emulate_string_inst(struct pt_regs *regs, u32 instword)
-{
-	u8 rT = (instword >> 21) & 0x1f;
-	u8 rA = (instword >> 16) & 0x1f;
-	u8 NB_RB = (instword >> 11) & 0x1f;
-	u32 num_bytes;
-	unsigned long EA;
-	int pos = 0;
-
-	/* Early out if we are an invalid form of lswx */
-	if ((instword & INST_STRING_MASK) == INST_LSWX)
-		if ((rT == rA) || (rT == NB_RB))
-			return -EINVAL;
-
-	EA = (rA == 0) ? 0 : regs->gpr[rA];
-
-	switch (instword & INST_STRING_MASK) {
-		case INST_LSWX:
-		case INST_STSWX:
-			EA += NB_RB;
-			num_bytes = regs->xer & 0x7f;
-			break;
-		case INST_LSWI:
-		case INST_STSWI:
-			num_bytes = (NB_RB == 0) ? 32 : NB_RB;
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	while (num_bytes != 0)
-	{
-		u8 val;
-		u32 shift = 8 * (3 - (pos & 0x3));
-
-		switch ((instword & INST_STRING_MASK)) {
-			case INST_LSWX:
-			case INST_LSWI:
-				if (get_user(val, (u8 __user *)EA))
-					return -EFAULT;
-				/* first time updating this reg,
-				 * zero it out */
-				if (pos == 0)
-					regs->gpr[rT] = 0;
-				regs->gpr[rT] |= val << shift;
-				break;
-			case INST_STSWI:
-			case INST_STSWX:
-				val = regs->gpr[rT] >> shift;
-				if (put_user(val, (u8 __user *)EA))
-					return -EFAULT;
-				break;
-		}
-		/* move EA to next address */
-		EA += 1;
-		num_bytes--;
-
-		/* manage our position within the register */
-		if (++pos == 4) {
-			pos = 0;
-			if (++rT == 32)
-				rT = 0;
-		}
-	}
-
-	return 0;
-}
-
-static int emulate_instruction(struct pt_regs *regs)
-{
-	u32 instword;
-	u32 rd;
-
-	if (!user_mode(regs))
-		return -EINVAL;
-	CHECK_FULL_REGS(regs);
-
-	if (get_user(instword, (u32 __user *)(regs->nip)))
-		return -EFAULT;
-
-	/* Emulate the mfspr rD, PVR.
-	 */
-	if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) {
-		rd = (instword >> 21) & 0x1f;
-		regs->gpr[rd] = mfspr(SPRN_PVR);
-		return 0;
-	}
-
-	/* Emulating the dcba insn is just a no-op.  */
-	if ((instword & INST_DCBA_MASK) == INST_DCBA)
-		return 0;
-
-	/* Emulate the mcrxr insn.  */
-	if ((instword & INST_MCRXR_MASK) == INST_MCRXR) {
-		int shift = (instword >> 21) & 0x1c;
-		unsigned long msk = 0xf0000000UL >> shift;
-
-		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
-		regs->xer &= ~0xf0000000UL;
-		return 0;
-	}
-
-	/* Emulate load/store string insn. */
-	if ((instword & INST_STRING_GEN_MASK) == INST_STRING)
-		return emulate_string_inst(regs, instword);
-
-	return -EINVAL;
-}
-
-/*
- * After we have successfully emulated an instruction, we have to
- * check if the instruction was being single-stepped, and if so,
- * pretend we got a single-step exception.  This was pointed out
- * by Kumar Gala.  -- paulus
- */
-static void emulate_single_step(struct pt_regs *regs)
-{
-	if (single_stepping(regs)) {
-		clear_single_step(regs);
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-	}
-}
-
-int is_valid_bugaddr(unsigned long addr)
-{
-	return addr >= PAGE_OFFSET;
-}
-
-void program_check_exception(struct pt_regs *regs)
-{
-	unsigned int reason = get_reason(regs);
-	extern int do_mathemu(struct pt_regs *regs);
-
-#ifdef CONFIG_MATH_EMULATION
-	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
-	 * but there seems to be a hardware bug on the 405GP (RevD)
-	 * that means ESR is sometimes set incorrectly - either to
-	 * ESR_DST (!?) or 0.  In the process of chasing this with the
-	 * hardware people - not sure if it can happen on any illegal
-	 * instruction or only on FP instructions, whether there is a
-	 * pattern to occurrences etc. -dgibson 31/Mar/2003 */
-	if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) {
-		emulate_single_step(regs);
-		return;
-	}
-#endif /* CONFIG_MATH_EMULATION */
-
-	if (reason & REASON_FP) {
-		/* IEEE FP exception */
-		int code = 0;
-		u32 fpscr;
-
-		/* We must make sure the FP state is consistent with
-		 * our MSR_FP in regs
-		 */
-		preempt_disable();
-		if (regs->msr & MSR_FP)
-			giveup_fpu(current);
-		preempt_enable();
-
-		fpscr = current->thread.fpscr.val;
-		fpscr &= fpscr << 22;	/* mask summary bits with enables */
-		if (fpscr & FPSCR_VX)
-			code = FPE_FLTINV;
-		else if (fpscr & FPSCR_OX)
-			code = FPE_FLTOVF;
-		else if (fpscr & FPSCR_UX)
-			code = FPE_FLTUND;
-		else if (fpscr & FPSCR_ZX)
-			code = FPE_FLTDIV;
-		else if (fpscr & FPSCR_XX)
-			code = FPE_FLTRES;
-		_exception(SIGFPE, regs, code, regs->nip);
-		return;
-	}
-
-	if (reason & REASON_TRAP) {
-		/* trap exception */
-		if (debugger_bpt(regs))
-			return;
-
-		if (!(regs->msr & MSR_PR) &&  /* not user-mode */
-		    report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) {
-			regs->nip += 4;
-			return;
-		}
-		_exception(SIGTRAP, regs, TRAP_BRKPT, 0);
-		return;
-	}
-
-	/* Try to emulate it if we should. */
-	if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
-		switch (emulate_instruction(regs)) {
-		case 0:
-			regs->nip += 4;
-			emulate_single_step(regs);
-			return;
-		case -EFAULT:
-			_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
-			return;
-		}
-	}
-
-	if (reason & REASON_PRIVILEGED)
-		_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
-	else
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-}
-
-void single_step_exception(struct pt_regs *regs)
-{
-	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
-	if (debugger_sstep(regs))
-		return;
-	_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-}
-
-void alignment_exception(struct pt_regs *regs)
-{
-	int sig, code, fixed = 0;
-
-	fixed = fix_alignment(regs);
-	if (fixed == 1) {
-		regs->nip += 4;	/* skip over emulated instruction */
-		emulate_single_step(regs);
-		return;
-	}
-	if (fixed == -EFAULT) {
-		sig = SIGSEGV;
-		code = SEGV_ACCERR;
-	} else {
-		sig = SIGBUS;
-		code = BUS_ADRALN;
-	}
-	if (user_mode(regs))
-		_exception(sig, regs, code, regs->dar);
-	else
-		bad_page_fault(regs, regs->dar, sig);
-}
-
-void StackOverflow(struct pt_regs *regs)
-{
-	printk(KERN_CRIT "Kernel stack overflow in process %p, r1=%lx\n",
-	       current, regs->gpr[1]);
-	debugger(regs);
-	show_regs(regs);
-	panic("kernel stack overflow");
-}
-
-void nonrecoverable_exception(struct pt_regs *regs)
-{
-	printk(KERN_ERR "Non-recoverable exception at PC=%lx MSR=%lx\n",
-	       regs->nip, regs->msr);
-	debugger(regs);
-	die("nonrecoverable exception", regs, SIGKILL);
-}
-
-void trace_syscall(struct pt_regs *regs)
-{
-	printk("Task: %p(%d), PC: %08lX/%08lX, Syscall: %3ld, Result: %s%ld    %s\n",
-	       current, current->pid, regs->nip, regs->link, regs->gpr[0],
-	       regs->ccr&0x10000000?"Error=":"", regs->gpr[3], print_tainted());
-}
-
-#ifdef CONFIG_8xx
-void SoftwareEmulation(struct pt_regs *regs)
-{
-	extern int do_mathemu(struct pt_regs *);
-	extern int Soft_emulate_8xx(struct pt_regs *);
-	int errcode;
-
-	CHECK_FULL_REGS(regs);
-
-	if (!user_mode(regs)) {
-		debugger(regs);
-		die("Kernel Mode Software FPU Emulation", regs, SIGFPE);
-	}
-
-#ifdef CONFIG_MATH_EMULATION
-	errcode = do_mathemu(regs);
-#else
-	errcode = Soft_emulate_8xx(regs);
-#endif
-	if (errcode) {
-		if (errcode > 0)
-			_exception(SIGFPE, regs, 0, 0);
-		else if (errcode == -EFAULT)
-			_exception(SIGSEGV, regs, 0, 0);
-		else
-			_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-	} else
-		emulate_single_step(regs);
-}
-#endif /* CONFIG_8xx */
-
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-
-void DebugException(struct pt_regs *regs, unsigned long debug_status)
-{
-	if (debug_status & DBSR_IC) {	/* instruction completion */
-		regs->msr &= ~MSR_DE;
-		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~DBCR0_IC;
-		} else {
-			/* Disable instruction completion */
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
-			/* Clear the instruction completion event */
-			mtspr(SPRN_DBSR, DBSR_IC);
-			if (debugger_sstep(regs))
-				return;
-		}
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-	}
-}
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
-
-#if !defined(CONFIG_TAU_INT)
-void TAUException(struct pt_regs *regs)
-{
-	printk("TAU trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
-	       regs->nip, regs->msr, regs->trap, print_tainted());
-}
-#endif /* CONFIG_INT_TAU */
-
-/*
- * FP unavailable trap from kernel - print a message, but let
- * the task use FP in the kernel until it returns to user mode.
- */
-void kernel_fp_unavailable_exception(struct pt_regs *regs)
-{
-	regs->msr |= MSR_FP;
-	printk(KERN_ERR "floating point used in kernel (task=%p, pc=%lx)\n",
-	       current, regs->nip);
-}
-
-void altivec_unavailable_exception(struct pt_regs *regs)
-{
-	static int kernel_altivec_count;
-
-#ifndef CONFIG_ALTIVEC
-	if (user_mode(regs)) {
-		/* A user program has executed an altivec instruction,
-		   but this kernel doesn't support altivec. */
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-		return;
-	}
-#endif
-	/* The kernel has executed an altivec instruction without
-	   first enabling altivec.  Whinge but let it do it. */
-	if (++kernel_altivec_count < 10)
-		printk(KERN_ERR "AltiVec used in kernel (task=%p, pc=%lx)\n",
-		       current, regs->nip);
-	regs->msr |= MSR_VEC;
-}
-
-#ifdef CONFIG_ALTIVEC
-void altivec_assist_exception(struct pt_regs *regs)
-{
-	int err;
-
-	preempt_disable();
-	if (regs->msr & MSR_VEC)
-		giveup_altivec(current);
-	preempt_enable();
-	if (!user_mode(regs)) {
-		printk(KERN_ERR "altivec assist exception in kernel mode"
-		       " at %lx\n", regs->nip);
-		debugger(regs);
-		die("altivec assist exception", regs, SIGFPE);
-		return;
-	}
-
-	err = emulate_altivec(regs);
-	if (err == 0) {
-		regs->nip += 4;		/* skip emulated instruction */
-		emulate_single_step(regs);
-		return;
-	}
-
-	if (err == -EFAULT) {
-		/* got an error reading the instruction */
-		_exception(SIGSEGV, regs, SEGV_ACCERR, regs->nip);
-	} else {
-		/* didn't recognize the instruction */
-		/* XXX quick hack for now: set the non-Java bit in the VSCR */
-		printk(KERN_ERR "unrecognized altivec instruction "
-		       "in %s at %lx\n", current->comm, regs->nip);
-		current->thread.vscr.u[3] |= 0x10000;
-	}
-}
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_BOOKE_WDT
-/*
- * Default handler for a Watchdog exception,
- * spins until a reboot occurs
- */
-void __attribute__ ((weak)) WatchdogHandler(struct pt_regs *regs)
-{
-	/* Generic WatchdogHandler, implement your own */
-	mtspr(SPRN_TCR, mfspr(SPRN_TCR)&(~TCR_WIE));
-	return;
-}
-
-void WatchdogException(struct pt_regs *regs)
-{
-	printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n");
-	WatchdogHandler(regs);
-}
-#endif
-
-void __init trap_init(void)
-{
-}
diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S
deleted file mode 100644
index 8a24bc47eb6c..000000000000
--- a/arch/ppc/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,164 +0,0 @@
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_ARCH(powerpc:common)
-jiffies = jiffies_64 + 4;
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .gnu.hash      : { *(.gnu.hash)	}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-/*  .init          : { *(.init)	} =0*/
-  .plt : { *(.plt) }
-  .text      :
-  {
-    _text = .;
-    TEXT_TEXT
-    SCHED_TEXT
-    LOCK_TEXT
-    *(.fixup)
-    *(.got1)
-    __got2_start = .;
-    *(.got2)
-    __got2_end = .;
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-
-  RODATA
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  .fixup   : { *(.fixup) }
-
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
-
-	__bug_table : {
-		__start___bug_table = .;
-		*(__bug_table)
-		__stop___bug_table = .;
-	}
-
-  /* Read-write section, merged into data segment: */
-  . = ALIGN(4096);
-  .data    :
-  {
-    DATA_DATA
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.got.plt) *(.got)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-
-  . = ALIGN(4096);
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
-  __nosave_end = .;
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = ALIGN(8192);
-  .data.init_task : { *(.data.init_task) }
-
-  NOTES
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
-  /* .exit.text is discarded at runtime, not link time,
-     to deal with references from __bug_table */
-  .exit.text : { EXIT_TEXT }
-  .init.data : {
-    INIT_DATA
-    __vtop_table_begin = .;
-    *(.vtop_fixup);
-    __vtop_table_end = .;
-    __ptov_table_begin = .;
-    *(.ptov_fixup);
-    __ptov_table_end = .;
-  }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-
-  SECURITY_INIT
-
-  __start___ftr_fixup = .;
-  __ftr_fixup : { *(__ftr_fixup) }
-  __stop___ftr_fixup = .;
-
-  PERCPU(4096)
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  . = ALIGN(4096);
-  __init_end = .;
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_stop = .;
-
-  _end = . ;
-  PROVIDE (end = .);
-
-  /* Sections to be discarded. */
-  /DISCARD/ : {
-    *(.exitcall.exit)
-    EXIT_DATA
-  }
-}
diff --git a/arch/ppc/lib/Makefile b/arch/ppc/lib/Makefile
deleted file mode 100644
index 095e661e79dd..000000000000
--- a/arch/ppc/lib/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for ppc-specific library files..
-#
-
-obj-y			:= checksum.o string.o div64.o
diff --git a/arch/ppc/lib/checksum.S b/arch/ppc/lib/checksum.S
deleted file mode 100644
index 7874e8a80455..000000000000
--- a/arch/ppc/lib/checksum.S
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * This file contains assembly-language implementations
- * of IP-style 1's complement checksum routines.
- *	
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- * Severely hacked about by Paul Mackerras (paulus@cs.anu.edu.au).
- */
-
-#include <linux/sys.h>
-#include <asm/processor.h>
-#include <asm/errno.h>
-#include <asm/ppc_asm.h>
-
-	.text
-
-/*
- * ip_fast_csum(buf, len) -- Optimized for IP header
- * len is in words and is always >= 5.
- */
-_GLOBAL(ip_fast_csum)
-	lwz	r0,0(r3)
-	lwzu	r5,4(r3)
-	addic.	r4,r4,-2
-	addc	r0,r0,r5
-	mtctr	r4
-	blelr-
-1:	lwzu	r4,4(r3)
-	adde	r0,r0,r4
-	bdnz	1b
-	addze	r0,r0		/* add in final carry */
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
-/*
- * Compute checksum of TCP or UDP pseudo-header:
- *   csum_tcpudp_magic(saddr, daddr, len, proto, sum)
- */	
-_GLOBAL(csum_tcpudp_magic)
-	rlwimi	r5,r6,16,0,15	/* put proto in upper half of len */
-	addc	r0,r3,r4	/* add 4 32-bit words together */
-	adde	r0,r0,r5
-	adde	r0,r0,r7
-	addze	r0,r0		/* add in final carry */
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * csum_partial(buff, len, sum)
- */
-_GLOBAL(csum_partial)
-	addic	r0,r5,0
-	subi	r3,r3,4
-	srwi.	r6,r4,2
-	beq	3f		/* if we're doing < 4 bytes */
-	andi.	r5,r3,2		/* Align buffer to longword boundary */
-	beq+	1f
-	lhz	r5,4(r3)	/* do 2 bytes to get aligned */
-	addi	r3,r3,2
-	subi	r4,r4,2
-	addc	r0,r0,r5
-	srwi.	r6,r4,2		/* # words to do */
-	beq	3f
-1:	mtctr	r6
-2:	lwzu	r5,4(r3)	/* the bdnz has zero overhead, so it should */
-	adde	r0,r0,r5	/* be unnecessary to unroll this loop */
-	bdnz	2b
-	andi.	r4,r4,3
-3:	cmpwi	0,r4,2
-	blt+	4f
-	lhz	r5,4(r3)
-	addi	r3,r3,2
-	subi	r4,r4,2
-	adde	r0,r0,r5
-4:	cmpwi	0,r4,1
-	bne+	5f
-	lbz	r5,4(r3)
-	slwi	r5,r5,8		/* Upper byte of word */
-	adde	r0,r0,r5
-5:	addze	r3,r0		/* add in final carry */
-	blr
-
-/*
- * Computes the checksum of a memory block at src, length len,
- * and adds in "sum" (32-bit), while copying the block to dst.
- * If an access exception occurs on src or dst, it stores -EFAULT
- * to *src_err or *dst_err respectively, and (for an error on
- * src) zeroes the rest of dst.
- *
- * csum_partial_copy_generic(src, dst, len, sum, src_err, dst_err)
- */
-_GLOBAL(csum_partial_copy_generic)
-	addic	r0,r6,0
-	subi	r3,r3,4
-	subi	r4,r4,4
-	srwi.	r6,r5,2
-	beq	3f		/* if we're doing < 4 bytes */
-	andi.	r9,r4,2		/* Align dst to longword boundary */
-	beq+	1f
-81:	lhz	r6,4(r3)	/* do 2 bytes to get aligned */
-	addi	r3,r3,2
-	subi	r5,r5,2
-91:	sth	r6,4(r4)
-	addi	r4,r4,2
-	addc	r0,r0,r6
-	srwi.	r6,r5,2		/* # words to do */
-	beq	3f
-1:	srwi.	r6,r5,4		/* # groups of 4 words to do */
-	beq	10f
-	mtctr	r6
-71:	lwz	r6,4(r3)
-72:	lwz	r9,8(r3)
-73:	lwz	r10,12(r3)
-74:	lwzu	r11,16(r3)
-	adde	r0,r0,r6
-75:	stw	r6,4(r4)
-	adde	r0,r0,r9
-76:	stw	r9,8(r4)
-	adde	r0,r0,r10
-77:	stw	r10,12(r4)
-	adde	r0,r0,r11
-78:	stwu	r11,16(r4)
-	bdnz	71b
-10:	rlwinm.	r6,r5,30,30,31	/* # words left to do */
-	beq	13f
-	mtctr	r6
-82:	lwzu	r9,4(r3)
-92:	stwu	r9,4(r4)
-	adde	r0,r0,r9
-	bdnz	82b
-13:	andi.	r5,r5,3
-3:	cmpwi	0,r5,2
-	blt+	4f
-83:	lhz	r6,4(r3)
-	addi	r3,r3,2
-	subi	r5,r5,2
-93:	sth	r6,4(r4)
-	addi	r4,r4,2
-	adde	r0,r0,r6
-4:	cmpwi	0,r5,1
-	bne+	5f
-84:	lbz	r6,4(r3)
-94:	stb	r6,4(r4)
-	slwi	r6,r6,8		/* Upper byte of word */
-	adde	r0,r0,r6
-5:	addze	r3,r0		/* add in final carry */
-	blr
-
-/* These shouldn't go in the fixup section, since that would
-   cause the ex_table addresses to get out of order. */
-
-src_error_4:
-	mfctr	r6		/* update # bytes remaining from ctr */
-	rlwimi	r5,r6,4,0,27
-	b	79f
-src_error_1:
-	li	r6,0
-	subi	r5,r5,2
-95:	sth	r6,4(r4)
-	addi	r4,r4,2
-79:	srwi.	r6,r5,2
-	beq	3f
-	mtctr	r6
-src_error_2:
-	li	r6,0
-96:	stwu	r6,4(r4)
-	bdnz	96b
-3:	andi.	r5,r5,3
-	beq	src_error
-src_error_3:
-	li	r6,0
-	mtctr	r5
-	addi	r4,r4,3
-97:	stbu	r6,1(r4)
-	bdnz	97b
-src_error:
-	cmpwi	0,r7,0
-	beq	1f
-	li	r6,-EFAULT
-	stw	r6,0(r7)
-1:	addze	r3,r0
-	blr
-
-dst_error:
-	cmpwi	0,r8,0
-	beq	1f
-	li	r6,-EFAULT
-	stw	r6,0(r8)
-1:	addze	r3,r0
-	blr
-
-.section __ex_table,"a"
-	.long	81b,src_error_1
-	.long	91b,dst_error
-	.long	71b,src_error_4
-	.long	72b,src_error_4
-	.long	73b,src_error_4
-	.long	74b,src_error_4
-	.long	75b,dst_error
-	.long	76b,dst_error
-	.long	77b,dst_error
-	.long	78b,dst_error
-	.long	82b,src_error_2
-	.long	92b,dst_error
-	.long	83b,src_error_3
-	.long	93b,dst_error
-	.long	84b,src_error_3
-	.long	94b,dst_error
-	.long	95b,dst_error
-	.long	96b,dst_error
-	.long	97b,dst_error
diff --git a/arch/ppc/lib/div64.S b/arch/ppc/lib/div64.S
deleted file mode 100644
index 3527569e9926..000000000000
--- a/arch/ppc/lib/div64.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Divide a 64-bit unsigned number by a 32-bit unsigned number.
- * This routine assumes that the top 32 bits of the dividend are
- * non-zero to start with.
- * On entry, r3 points to the dividend, which get overwritten with
- * the 64-bit quotient, and r4 contains the divisor.
- * On exit, r3 contains the remainder.
- *
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-_GLOBAL(__div64_32)
-	lwz	r5,0(r3)	# get the dividend into r5/r6
-	lwz	r6,4(r3)
-	cmplw	r5,r4
-	li	r7,0
-	li	r8,0
-	blt	1f
-	divwu	r7,r5,r4	# if dividend.hi >= divisor,
-	mullw	r0,r7,r4	# quotient.hi = dividend.hi / divisor
-	subf.	r5,r0,r5	# dividend.hi %= divisor
-	beq	3f
-1:	mr	r11,r5		# here dividend.hi != 0
-	andis.	r0,r5,0xc000
-	bne	2f
-	cntlzw	r0,r5		# we are shifting the dividend right
-	li	r10,-1		# to make it < 2^32, and shifting
-	srw	r10,r10,r0	# the divisor right the same amount,
-	add	r9,r4,r10	# rounding up (so the estimate cannot
-	andc	r11,r6,r10	# ever be too large, only too small)
-	andc	r9,r9,r10
-	or	r11,r5,r11
-	rotlw	r9,r9,r0
-	rotlw	r11,r11,r0
-	divwu	r11,r11,r9	# then we divide the shifted quantities
-2:	mullw	r10,r11,r4	# to get an estimate of the quotient,
-	mulhwu	r9,r11,r4	# multiply the estimate by the divisor,
-	subfc	r6,r10,r6	# take the product from the divisor,
-	add	r8,r8,r11	# and add the estimate to the accumulated
-	subfe.	r5,r9,r5	# quotient
-	bne	1b
-3:	cmplw	r6,r4
-	blt	4f
-	divwu	r0,r6,r4	# perform the remaining 32-bit division
-	mullw	r10,r0,r4	# and get the remainder
-	add	r8,r8,r0
-	subf	r6,r10,r6
-4:	stw	r7,0(r3)	# return the quotient in *r3
-	stw	r8,4(r3)
-	mr	r3,r6		# return the remainder in r3
-	blr
diff --git a/arch/ppc/lib/locks.c b/arch/ppc/lib/locks.c
deleted file mode 100644
index ea4aee6b20e6..000000000000
--- a/arch/ppc/lib/locks.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Locks for smp ppc
- *
- * Written by Cort Dougan (cort@cs.nmt.edu)
- */
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/ppc_asm.h>
-#include <asm/smp.h>
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-
-#undef INIT_STUCK
-#define INIT_STUCK 200000000 /*0xffffffff*/
-
-/*
- * Try to acquire a spinlock.
- * Only does the stwcx. if the load returned 0 - the Programming
- * Environments Manual suggests not doing unnecessary stcwx.'s
- * since they may inhibit forward progress by other CPUs in getting
- * a lock.
- */
-static inline unsigned long __spin_trylock(volatile unsigned long *lock)
-{
-	unsigned long ret;
-
-	__asm__ __volatile__ ("\n\
-1:	lwarx	%0,0,%1\n\
-	cmpwi	0,%0,0\n\
-	bne	2f\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%2,0,%1\n\
-	bne-	1b\n\
-	isync\n\
-2:"
-	: "=&r"(ret)
-	: "r"(lock), "r"(1)
-	: "cr0", "memory");
-
-	return ret;
-}
-
-void _raw_spin_lock(spinlock_t *lock)
-{
-	int cpu = smp_processor_id();
-	unsigned int stuck = INIT_STUCK;
-	while (__spin_trylock(&lock->lock)) {
-		while ((unsigned volatile long)lock->lock != 0) {
-			if (!--stuck) {
-				printk("_spin_lock(%p) CPU#%d NIP %p"
-				       " holder: cpu %ld pc %08lX\n",
-				       lock, cpu, __builtin_return_address(0),
-				       lock->owner_cpu,lock->owner_pc);
-				stuck = INIT_STUCK;
-				/* steal the lock */
-				/*xchg_u32((void *)&lock->lock,0);*/
-			}
-		}
-	}
-	lock->owner_pc = (unsigned long)__builtin_return_address(0);
-	lock->owner_cpu = cpu;
-}
-EXPORT_SYMBOL(_raw_spin_lock);
-
-int _raw_spin_trylock(spinlock_t *lock)
-{
-	if (__spin_trylock(&lock->lock))
-		return 0;
-	lock->owner_cpu = smp_processor_id();
-	lock->owner_pc = (unsigned long)__builtin_return_address(0);
-	return 1;
-}
-EXPORT_SYMBOL(_raw_spin_trylock);
-
-void _raw_spin_unlock(spinlock_t *lp)
-{
-  	if ( !lp->lock )
-		printk("_spin_unlock(%p): no lock cpu %d curr PC %p %s/%d\n",
-		       lp, smp_processor_id(), __builtin_return_address(0),
-		       current->comm, current->pid);
-	if ( lp->owner_cpu != smp_processor_id() )
-		printk("_spin_unlock(%p): cpu %d trying clear of cpu %d pc %lx val %lx\n",
-		      lp, smp_processor_id(), (int)lp->owner_cpu,
-		      lp->owner_pc,lp->lock);
-	lp->owner_pc = lp->owner_cpu = 0;
-	wmb();
-	lp->lock = 0;
-}
-EXPORT_SYMBOL(_raw_spin_unlock);
-
-/*
- * For rwlocks, zero is unlocked, -1 is write-locked,
- * positive is read-locked.
- */
-static __inline__ int __read_trylock(rwlock_t *rw)
-{
-	signed int tmp;
-
-	__asm__ __volatile__(
-"2:	lwarx	%0,0,%1		# __read_trylock\n\
-	addic.	%0,%0,1\n\
-	ble-	1f\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%0,0,%1\n\
-	bne-	2b\n\
-	isync\n\
-1:"
-	: "=&r"(tmp)
-	: "r"(&rw->lock)
-	: "cr0", "memory");
-
-	return tmp;
-}
-
-int _raw_read_trylock(rwlock_t *rw)
-{
-	return __read_trylock(rw) > 0;
-}
-EXPORT_SYMBOL(_raw_read_trylock);
-
-void _raw_read_lock(rwlock_t *rw)
-{
-	unsigned int stuck;
-
-	while (__read_trylock(rw) <= 0) {
-		stuck = INIT_STUCK;
-		while (!read_can_lock(rw)) {
-			if (--stuck == 0) {
-				printk("_read_lock(%p) CPU#%d lock %d\n",
-				       rw, raw_smp_processor_id(), rw->lock);
-				stuck = INIT_STUCK;
-			}
-		}
-	}
-}
-EXPORT_SYMBOL(_raw_read_lock);
-
-void _raw_read_unlock(rwlock_t *rw)
-{
-	if ( rw->lock == 0 )
-		printk("_read_unlock(): %s/%d (nip %08lX) lock %d\n",
-		       current->comm,current->pid,current->thread.regs->nip,
-		      rw->lock);
-	wmb();
-	atomic_dec((atomic_t *) &(rw)->lock);
-}
-EXPORT_SYMBOL(_raw_read_unlock);
-
-void _raw_write_lock(rwlock_t *rw)
-{
-	unsigned int stuck;
-
-	while (cmpxchg(&rw->lock, 0, -1) != 0) {
-		stuck = INIT_STUCK;
-		while (!write_can_lock(rw)) {
-			if (--stuck == 0) {
-				printk("write_lock(%p) CPU#%d lock %d)\n",
-				       rw, raw_smp_processor_id(), rw->lock);
-				stuck = INIT_STUCK;
-			}
-		}
-	}
-	wmb();
-}
-EXPORT_SYMBOL(_raw_write_lock);
-
-int _raw_write_trylock(rwlock_t *rw)
-{
-	if (cmpxchg(&rw->lock, 0, -1) != 0)
-		return 0;
-	wmb();
-	return 1;
-}
-EXPORT_SYMBOL(_raw_write_trylock);
-
-void _raw_write_unlock(rwlock_t *rw)
-{
-	if (rw->lock >= 0)
-		printk("_write_lock(): %s/%d (nip %08lX) lock %d\n",
-		      current->comm,current->pid,current->thread.regs->nip,
-		      rw->lock);
-	wmb();
-	rw->lock = 0;
-}
-EXPORT_SYMBOL(_raw_write_unlock);
-
-#endif
diff --git a/arch/ppc/lib/string.S b/arch/ppc/lib/string.S
deleted file mode 100644
index 927253bfc826..000000000000
--- a/arch/ppc/lib/string.S
+++ /dev/null
@@ -1,732 +0,0 @@
-/*
- * String handling functions for PowerPC.
- *
- * Copyright (C) 1996 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/errno.h>
-#include <asm/ppc_asm.h>
-
-#define COPY_16_BYTES		\
-	lwz	r7,4(r4);	\
-	lwz	r8,8(r4);	\
-	lwz	r9,12(r4);	\
-	lwzu	r10,16(r4);	\
-	stw	r7,4(r6);	\
-	stw	r8,8(r6);	\
-	stw	r9,12(r6);	\
-	stwu	r10,16(r6)
-
-#define COPY_16_BYTES_WITHEX(n)	\
-8 ## n ## 0:			\
-	lwz	r7,4(r4);	\
-8 ## n ## 1:			\
-	lwz	r8,8(r4);	\
-8 ## n ## 2:			\
-	lwz	r9,12(r4);	\
-8 ## n ## 3:			\
-	lwzu	r10,16(r4);	\
-8 ## n ## 4:			\
-	stw	r7,4(r6);	\
-8 ## n ## 5:			\
-	stw	r8,8(r6);	\
-8 ## n ## 6:			\
-	stw	r9,12(r6);	\
-8 ## n ## 7:			\
-	stwu	r10,16(r6)
-
-#define COPY_16_BYTES_EXCODE(n)			\
-9 ## n ## 0:					\
-	addi	r5,r5,-(16 * n);		\
-	b	104f;				\
-9 ## n ## 1:					\
-	addi	r5,r5,-(16 * n);		\
-	b	105f;				\
-.section __ex_table,"a";			\
-	.align	2;				\
-	.long	8 ## n ## 0b,9 ## n ## 0b;	\
-	.long	8 ## n ## 1b,9 ## n ## 0b;	\
-	.long	8 ## n ## 2b,9 ## n ## 0b;	\
-	.long	8 ## n ## 3b,9 ## n ## 0b;	\
-	.long	8 ## n ## 4b,9 ## n ## 1b;	\
-	.long	8 ## n ## 5b,9 ## n ## 1b;	\
-	.long	8 ## n ## 6b,9 ## n ## 1b;	\
-	.long	8 ## n ## 7b,9 ## n ## 1b;	\
-	.text
-
-	.text
-	.stabs	"arch/ppc/lib/",N_SO,0,0,0f
-	.stabs	"string.S",N_SO,0,0,0f
-
-CACHELINE_BYTES = L1_CACHE_BYTES
-LG_CACHELINE_BYTES = L1_CACHE_SHIFT
-CACHELINE_MASK = (L1_CACHE_BYTES-1)
-
-_GLOBAL(strcpy)
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r5)
-	bne	1b
-	blr
-
-/* This clears out any unused part of the destination buffer,
-   just as the libc version does.  -- paulus */
-_GLOBAL(strncpy)
-	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r6)
-	bdnzf	2,1b		/* dec ctr, branch if ctr != 0 && !cr0.eq */
-	bnelr			/* if we didn't hit a null char, we're done */
-	mfctr	r5
-	cmpwi	0,r5,0		/* any space left in destination buffer? */
-	beqlr			/* we know r0 == 0 here */
-2:	stbu	r0,1(r6)	/* clear it out if so */
-	bdnz	2b
-	blr
-
-_GLOBAL(strcat)
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r0,1(r5)
-	cmpwi	0,r0,0
-	bne	1b
-	addi	r5,r5,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r5)
-	bne	1b
-	blr
-
-_GLOBAL(strcmp)
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r5)
-	cmpwi	1,r3,0
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	beqlr	1
-	beq	1b
-	blr
-
-_GLOBAL(strncmp)
-	PPC_LCMPI r5,0
-	beqlr
-	mtctr	r5
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r5)
-	cmpwi	1,r3,0
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	beqlr	1
-	bdnzt	eq,1b
-	blr
-
-_GLOBAL(strlen)
-	addi	r4,r3,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	bne	1b
-	subf	r3,r3,r4
-	blr
-
-/*
- * Use dcbz on the complete cache lines in the destination
- * to set them to zero.  This requires that the destination
- * area is cacheable.  -- paulus
- */
-_GLOBAL(cacheable_memzero)
-	mr	r5,r4
-	li	r4,0
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	clrlwi	r7,r6,32-LG_CACHELINE_BYTES
-	add	r8,r7,r5
-	srwi	r9,r8,LG_CACHELINE_BYTES
-	addic.	r9,r9,-1	/* total number of complete cachelines */
-	ble	2f
-	xori	r0,r7,CACHELINE_MASK & ~3
-	srwi.	r0,r0,2
-	beq	3f
-	mtctr	r0
-4:	stwu	r4,4(r6)
-	bdnz	4b
-3:	mtctr	r9
-	li	r7,4
-#if !defined(CONFIG_8xx)
-10:	dcbz	r7,r6
-#else
-10:	stw	r4, 4(r6)
-	stw	r4, 8(r6)
-	stw	r4, 12(r6)
-	stw	r4, 16(r6)
-#if CACHE_LINE_SIZE >= 32
-	stw	r4, 20(r6)
-	stw	r4, 24(r6)
-	stw	r4, 28(r6)
-	stw	r4, 32(r6)
-#endif /* CACHE_LINE_SIZE */
-#endif
-	addi	r6,r6,CACHELINE_BYTES
-	bdnz	10b
-	clrlwi	r5,r8,32-LG_CACHELINE_BYTES
-	addi	r5,r5,4
-2:	srwi	r0,r5,2
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
-
-_GLOBAL(memset)
-	rlwimi	r4,r4,8,16,23
-	rlwimi	r4,r4,16,0,15
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	srwi	r0,r5,2
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
-
-/*
- * This version uses dcbz on the complete cache lines in the
- * destination area to reduce memory traffic.  This requires that
- * the destination area is cacheable.
- * We only use this version if the source and dest don't overlap.
- * -- paulus.
- */
-_GLOBAL(cacheable_memcpy)
-	add	r7,r3,r5		/* test if the src & dst overlap */
-	add	r8,r4,r5
-	cmplw	0,r4,r7
-	cmplw	1,r3,r8
-	crand	0,0,4			/* cr0.lt &= cr1.lt */
-	blt	memcpy			/* if regions overlap */
-
-	addi	r4,r4,-4
-	addi	r6,r3,-4
-	neg	r0,r3
-	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
-	beq	58f
-
-	cmplw	0,r5,r0			/* is this more than total to do? */
-	blt	63f			/* if not much to do */
-	andi.	r8,r0,3			/* get it word-aligned first */
-	subf	r5,r0,r5
-	mtctr	r8
-	beq+	61f
-70:	lbz	r9,4(r4)		/* do some bytes */
-	stb	r9,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	70b
-61:	srwi.	r0,r0,2
-	mtctr	r0
-	beq	58f
-72:	lwzu	r9,4(r4)		/* do some words */
-	stwu	r9,4(r6)
-	bdnz	72b
-
-58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
-	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
-	li	r11,4
-	mtctr	r0
-	beq	63f
-53:
-#if !defined(CONFIG_8xx)
-	dcbz	r11,r6
-#endif
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-#endif
-#endif
-#endif
-	bdnz	53b
-
-63:	srwi.	r0,r5,2
-	mtctr	r0
-	beq	64f
-30:	lwzu	r0,4(r4)
-	stwu	r0,4(r6)
-	bdnz	30b
-
-64:	andi.	r0,r5,3
-	mtctr	r0
-	beq+	65f
-40:	lbz	r0,4(r4)
-	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	40b
-65:	blr
-
-_GLOBAL(memmove)
-	cmplw	0,r3,r4
-	bgt	backwards_memcpy
-	/* fall through */
-
-_GLOBAL(memcpy)
-	srwi.	r7,r5,3
-	addi	r6,r3,-4
-	addi	r4,r4,-4
-	beq	2f			/* if less than 8 bytes to do */
-	andi.	r0,r6,3			/* get dest word aligned */
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,4(r4)
-	lwzu	r8,8(r4)
-	stw	r7,4(r6)
-	stwu	r8,8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,4(r4)
-	addi	r5,r5,-4
-	stwu	r0,4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r4,r4,3
-	addi	r6,r6,3
-4:	lbzu	r0,1(r4)
-	stbu	r0,1(r6)
-	bdnz	4b
-	blr
-5:	subfic	r0,r0,4
-	mtctr	r0
-6:	lbz	r7,4(r4)
-	addi	r4,r4,1
-	stb	r7,4(r6)
-	addi	r6,r6,1
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-_GLOBAL(backwards_memcpy)
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	add	r6,r3,r5
-	add	r4,r4,r5
-	beq	2f
-	andi.	r0,r6,3
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,-4(r4)
-	lwzu	r8,-8(r4)
-	stw	r7,-4(r6)
-	stwu	r8,-8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,-4(r4)
-	subi	r5,r5,4
-	stwu	r0,-4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-4:	lbzu	r0,-1(r4)
-	stbu	r0,-1(r6)
-	bdnz	4b
-	blr
-5:	mtctr	r0
-6:	lbzu	r7,-1(r4)
-	stbu	r7,-1(r6)
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-_GLOBAL(memcmp)
-	cmpwi	0,r5,0
-	ble-	2f
-	mtctr	r5
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r6)
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	bdnzt	2,1b
-	blr
-2:	li	r3,0
-	blr
-
-_GLOBAL(memchr)
-	cmpwi	0,r5,0
-	ble-	2f
-	mtctr	r5
-	addi	r3,r3,-1
-1:	lbzu	r0,1(r3)
-	cmpw	0,r0,r4
-	bdnzf	2,1b
-	beqlr
-2:	li	r3,0
-	blr
-
-_GLOBAL(__copy_tofrom_user)
-	addi	r4,r4,-4
-	addi	r6,r3,-4
-	neg	r0,r3
-	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
-	beq	58f
-
-	cmplw	0,r5,r0			/* is this more than total to do? */
-	blt	63f			/* if not much to do */
-	andi.	r8,r0,3			/* get it word-aligned first */
-	mtctr	r8
-	beq+	61f
-70:	lbz	r9,4(r4)		/* do some bytes */
-71:	stb	r9,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	70b
-61:	subf	r5,r0,r5
-	srwi.	r0,r0,2
-	mtctr	r0
-	beq	58f
-72:	lwzu	r9,4(r4)		/* do some words */
-73:	stwu	r9,4(r6)
-	bdnz	72b
-
-	.section __ex_table,"a"
-	.align	2
-	.long	70b,100f
-	.long	71b,101f
-	.long	72b,102f
-	.long	73b,103f
-	.text
-
-58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
-	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
-	li	r11,4
-	beq	63f
-
-#ifdef CONFIG_8xx
-	/* Don't use prefetch on 8xx */
-	mtctr	r0
-	li	r0,0
-53:	COPY_16_BYTES_WITHEX(0)
-	bdnz	53b
-
-#else /* not CONFIG_8xx */
-	/* Here we decide how far ahead to prefetch the source */
-	li	r3,4
-	cmpwi	r0,1
-	li	r7,0
-	ble	114f
-	li	r7,1
-#if MAX_COPY_PREFETCH > 1
-	/* Heuristically, for large transfers we prefetch
-	   MAX_COPY_PREFETCH cachelines ahead.  For small transfers
-	   we prefetch 1 cacheline ahead. */
-	cmpwi	r0,MAX_COPY_PREFETCH
-	ble	112f
-	li	r7,MAX_COPY_PREFETCH
-112:	mtctr	r7
-111:	dcbt	r3,r4
-	addi	r3,r3,CACHELINE_BYTES
-	bdnz	111b
-#else
-	dcbt	r3,r4
-	addi	r3,r3,CACHELINE_BYTES
-#endif /* MAX_COPY_PREFETCH > 1 */
-
-114:	subf	r8,r7,r0
-	mr	r0,r7
-	mtctr	r8
-
-53:	dcbt	r3,r4
-54:	dcbz	r11,r6
-	.section __ex_table,"a"
-	.align	2
-	.long	54b,105f
-	.text
-/* the main body of the cacheline loop */
-	COPY_16_BYTES_WITHEX(0)
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES_WITHEX(1)
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES_WITHEX(2)
-	COPY_16_BYTES_WITHEX(3)
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES_WITHEX(4)
-	COPY_16_BYTES_WITHEX(5)
-	COPY_16_BYTES_WITHEX(6)
-	COPY_16_BYTES_WITHEX(7)
-#endif
-#endif
-#endif
-	bdnz	53b
-	cmpwi	r0,0
-	li	r3,4
-	li	r7,0
-	bne	114b
-#endif /* CONFIG_8xx */
-
-63:	srwi.	r0,r5,2
-	mtctr	r0
-	beq	64f
-30:	lwzu	r0,4(r4)
-31:	stwu	r0,4(r6)
-	bdnz	30b
-
-64:	andi.	r0,r5,3
-	mtctr	r0
-	beq+	65f
-40:	lbz	r0,4(r4)
-41:	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	40b
-65:	li	r3,0
-	blr
-
-/* read fault, initial single-byte copy */
-100:	li	r9,0
-	b	90f
-/* write fault, initial single-byte copy */
-101:	li	r9,1
-90:	subf	r5,r8,r5
-	li	r3,0
-	b	99f
-/* read fault, initial word copy */
-102:	li	r9,0
-	b	91f
-/* write fault, initial word copy */
-103:	li	r9,1
-91:	li	r3,2
-	b	99f
-
-/*
- * this stuff handles faults in the cacheline loop and branches to either
- * 104f (if in read part) or 105f (if in write part), after updating r5
- */
-	COPY_16_BYTES_EXCODE(0)
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES_EXCODE(1)
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES_EXCODE(2)
-	COPY_16_BYTES_EXCODE(3)
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES_EXCODE(4)
-	COPY_16_BYTES_EXCODE(5)
-	COPY_16_BYTES_EXCODE(6)
-	COPY_16_BYTES_EXCODE(7)
-#endif
-#endif
-#endif
-
-/* read fault in cacheline loop */
-104:	li	r9,0
-	b	92f
-/* fault on dcbz (effectively a write fault) */
-/* or write fault in cacheline loop */
-105:	li	r9,1
-92:	li	r3,LG_CACHELINE_BYTES
-	mfctr	r8
-	add	r0,r0,r8
-	b	106f
-/* read fault in final word loop */
-108:	li	r9,0
-	b	93f
-/* write fault in final word loop */
-109:	li	r9,1
-93:	andi.	r5,r5,3
-	li	r3,2
-	b	99f
-/* read fault in final byte loop */
-110:	li	r9,0
-	b	94f
-/* write fault in final byte loop */
-111:	li	r9,1
-94:	li	r5,0
-	li	r3,0
-/*
- * At this stage the number of bytes not copied is
- * r5 + (ctr << r3), and r9 is 0 for read or 1 for write.
- */
-99:	mfctr	r0
-106:	slw	r3,r0,r3
-	add.	r3,r3,r5
-	beq	120f			/* shouldn't happen */
-	cmpwi	0,r9,0
-	bne	120f
-/* for a read fault, first try to continue the copy one byte at a time */
-	mtctr	r3
-130:	lbz	r0,4(r4)
-131:	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	130b
-/* then clear out the destination: r3 bytes starting at 4(r6) */
-132:	mfctr	r3
-	srwi.	r0,r3,2
-	li	r9,0
-	mtctr	r0
-	beq	113f
-112:	stwu	r9,4(r6)
-	bdnz	112b
-113:	andi.	r0,r3,3
-	mtctr	r0
-	beq	120f
-114:	stb	r9,4(r6)
-	addi	r6,r6,1
-	bdnz	114b
-120:	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	30b,108b
-	.long	31b,109b
-	.long	40b,110b
-	.long	41b,111b
-	.long	130b,132b
-	.long	131b,120b
-	.long	112b,120b
-	.long	114b,120b
-	.text
-
-_GLOBAL(__clear_user)
-	addi	r6,r3,-4
-	li	r3,0
-	li	r5,0
-	cmplwi	0,r4,4
-	blt	7f
-	/* clear a single word */
-11:	stwu	r5,4(r6)
-	beqlr
-	/* clear word sized chunks */
-	andi.	r0,r6,3
-	add	r4,r0,r4
-	subf	r6,r0,r6
-	srwi	r0,r4,2
-	andi.	r4,r4,3
-	mtctr	r0
-	bdz	7f
-1:	stwu	r5,4(r6)
-	bdnz	1b
-	/* clear byte sized chunks */
-7:	cmpwi	0,r4,0
-	beqlr
-	mtctr	r4
-	addi	r6,r6,3
-8:	stbu	r5,1(r6)
-	bdnz	8b
-	blr
-90:	mr	r3,r4
-	blr
-91:	mfctr	r3
-	slwi	r3,r3,2
-	add	r3,r3,r4
-	blr
-92:	mfctr	r3
-	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	11b,90b
-	.long	1b,91b
-	.long	8b,92b
-	.text
-
-_GLOBAL(__strncpy_from_user)
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-	cmpwi	0,r5,0
-	beq	2f
-	mtctr	r5
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r6)
-	bdnzf	2,1b		/* dec ctr, branch if ctr != 0 && !cr0.eq */
-	beq	3f
-2:	addi	r6,r6,1
-3:	subf	r3,r3,r6
-	blr
-99:	li	r3,-EFAULT
-	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	1b,99b
-	.text
-
-/* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
-_GLOBAL(__strnlen_user)
-	addi	r7,r3,-1
-	subf	r6,r7,r5	/* top+1 - str */
-	cmplw	0,r4,r6
-	bge	0f
-	mr	r6,r4
-0:	mtctr	r6		/* ctr = min(len, top - str) */
-1:	lbzu	r0,1(r7)	/* get next byte */
-	cmpwi	0,r0,0
-	bdnzf	2,1b		/* loop if --ctr != 0 && byte != 0 */
-	addi	r7,r7,1
-	subf	r3,r3,r7	/* number of bytes we have looked at */
-	beqlr			/* return if we found a 0 byte */
-	cmpw	0,r3,r4		/* did we look at all len bytes? */
-	blt	99f		/* if not, must have hit top */
-	addi	r3,r4,1		/* return len + 1 to indicate no null found */
-	blr
-99:	li	r3,0		/* bad address, return 0 */
-	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	1b,99b
diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c
deleted file mode 100644
index fbb577a0d165..000000000000
--- a/arch/ppc/mm/44x_mmu.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Modifications by Matt Porter (mporter@mvista.com) to support
- * PPC44x Book E processors.
- *
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-
-#include "mmu_decl.h"
-
-extern char etext[], _stext[];
-
-/* Used by the 44x TLB replacement exception handler.
- * Just needed it declared someplace.
- */
-unsigned int tlb_44x_index = 0;
-unsigned int tlb_44x_hwater = PPC4XX_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
-int icache_44x_need_flush;
-
-/*
- * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
- */
-static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
-{
-	__asm__ __volatile__(
-		"tlbwe	%2,%3,%4\n"
-		"tlbwe	%1,%3,%5\n"
-		"tlbwe	%0,%3,%6\n"
-	:
-	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
-	  "r" (phys),
-	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
-	  "r" (tlb_44x_hwater--), /* slot for this TLB entry */
-	  "i" (PPC44x_TLB_PAGEID),
-	  "i" (PPC44x_TLB_XLAT),
-	  "i" (PPC44x_TLB_ATTRIB));
-}
-
-void __init MMU_init_hw(void)
-{
-	flush_instruction_cache();
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long addr;
-
-	/* Pin in enough TLBs to cover any lowmem not covered by the
-	 * initial 256M mapping established in head_44x.S */
-	for (addr = PPC_PIN_SIZE; addr < total_lowmem;
-	     addr += PPC_PIN_SIZE)
-		ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
-
-	return total_lowmem;
-}
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
deleted file mode 100644
index ea785dbaac7c..000000000000
--- a/arch/ppc/mm/4xx_mmu.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include "mmu_decl.h"
-
-extern int __map_without_ltlbs;
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
-	/*
-	 * The Zone Protection Register (ZPR) defines how protection will
-	 * be applied to every page which is a member of a given zone. At
-	 * present, we utilize only two of the 4xx's zones.
-	 * The zone index bits (of ZSEL) in the PTE are used for software
-	 * indicators, except the LSB.  For user access, zone 1 is used,
-	 * for kernel access, zone 0 is used.  We set all but zone 1
-	 * to zero, allowing only kernel access as indicated in the PTE.
-	 * For zone 1, we set a 01 binary (a value of 10 will not work)
-	 * to allow user access as indicated in the PTE.  This also allows
-	 * kernel access as indicated in the PTE.
-	 */
-
-        mtspr(SPRN_ZPR, 0x10000000);
-
-	flush_instruction_cache();
-
-	/*
-	 * Set up the real-mode cache parameters for the exception vector
-	 * handlers (which are run in real-mode).
-	 */
-
-        mtspr(SPRN_DCWR, 0x00000000);	/* All caching is write-back */
-
-        /*
-	 * Cache instruction and data space where the exception
-	 * vectors and the kernel live in real-mode.
-	 */
-
-        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
-        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
-}
-
-#define LARGE_PAGE_SIZE_16M	(1<<24)
-#define LARGE_PAGE_SIZE_4M	(1<<22)
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long v, s;
-	phys_addr_t p;
-
-	v = KERNELBASE;
-	p = PPC_MEMSTART;
-	s = total_lowmem;
-
-	if (__map_without_ltlbs)
-		return 0;
-
-	while (s >= LARGE_PAGE_SIZE_16M) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-
-		v += LARGE_PAGE_SIZE_16M;
-		p += LARGE_PAGE_SIZE_16M;
-		s -= LARGE_PAGE_SIZE_16M;
-	}
-
-	while (s >= LARGE_PAGE_SIZE_4M) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp) = val;
-
-		v += LARGE_PAGE_SIZE_4M;
-		p += LARGE_PAGE_SIZE_4M;
-		s -= LARGE_PAGE_SIZE_4M;
-	}
-
-	return total_lowmem - s;
-}
diff --git a/arch/ppc/mm/Makefile b/arch/ppc/mm/Makefile
deleted file mode 100644
index 691ba2bae05d..000000000000
--- a/arch/ppc/mm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of the memory manager.
-#
-
-obj-y				:= fault.o init.o mem_pieces.o \
-					mmu_context.o pgtable.o
-
-obj-$(CONFIG_PPC_STD_MMU)	+= hashtable.o ppc_mmu.o tlb.o
-obj-$(CONFIG_40x)		+= 4xx_mmu.o
-obj-$(CONFIG_44x)		+= 44x_mmu.o
diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c
deleted file mode 100644
index 36c0e7529edb..000000000000
--- a/arch/ppc/mm/fault.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Derived from "arch/i386/mm/fault.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  Modified by Cort Dougan and Paul Mackerras.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/tlbflush.h>
-
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-extern void (*debugger)(struct pt_regs *);
-extern void (*debugger_fault_handler)(struct pt_regs *);
-extern int (*debugger_dabr_match)(struct pt_regs *);
-int debugger_kernel_faults = 1;
-#endif
-
-unsigned long htab_reloads;	/* updated by hashtable.S:hash_page() */
-unsigned long htab_evicts; 	/* updated by hashtable.S:hash_page() */
-unsigned long htab_preloads;	/* updated by hashtable.S:add_hash_page() */
-unsigned long pte_misses;	/* updated by do_page_fault() */
-unsigned long pte_errors;	/* updated by do_page_fault() */
-unsigned int probingmem;
-
-/*
- * Check whether the instruction at regs->nip is a store using
- * an update addressing form which will update r1.
- */
-static int store_updates_sp(struct pt_regs *regs)
-{
-	unsigned int inst;
-
-	if (get_user(inst, (unsigned int __user *)regs->nip))
-		return 0;
-	/* check for 1 in the rA field */
-	if (((inst >> 16) & 0x1f) != 1)
-		return 0;
-	/* check major opcode */
-	switch (inst >> 26) {
-	case 37:	/* stwu */
-	case 39:	/* stbu */
-	case 45:	/* sthu */
-	case 53:	/* stfsu */
-	case 55:	/* stfdu */
-		return 1;
-	case 31:
-		/* check minor opcode */
-		switch ((inst >> 1) & 0x3ff) {
-		case 183:	/* stwux */
-		case 247:	/* stbux */
-		case 439:	/* sthux */
-		case 695:	/* stfsux */
-		case 759:	/* stfdux */
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * For 600- and 800-family processors, the error_code parameter is DSISR
- * for a data fault, SRR1 for an instruction fault. For 400-family processors
- * the error_code parameter is ESR for a data fault, 0 for an instruction
- * fault.
- */
-int do_page_fault(struct pt_regs *regs, unsigned long address,
-		  unsigned long error_code)
-{
-	struct vm_area_struct * vma;
-	struct mm_struct *mm = current->mm;
-	siginfo_t info;
-	int code = SEGV_MAPERR;
-	int fault;
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
-	int is_write = error_code & ESR_DST;
-#else
-	int is_write = 0;
-
-	/*
-	 * Fortunately the bit assignments in SRR1 for an instruction
-	 * fault and DSISR for a data fault are mostly the same for the
-	 * bits we are interested in.  But there are some bits which
-	 * indicate errors in DSISR but can validly be set in SRR1.
-	 */
-	if (TRAP(regs) == 0x400)
-		error_code &= 0x48200000;
-	else
-		is_write = error_code & 0x02000000;
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
-
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-	if (debugger_fault_handler && TRAP(regs) == 0x300) {
-		debugger_fault_handler(regs);
-		return 0;
-	}
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	if (error_code & 0x00400000) {
-		/* DABR match */
-		if (debugger_dabr_match(regs))
-			return 0;
-	}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-#endif /* CONFIG_XMON || CONFIG_KGDB */
-
-	if (in_atomic() || mm == NULL)
-		return SIGSEGV;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
-	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (!is_write)
-                goto bad_area;
-
-	/*
-	 * N.B. The rs6000/xcoff ABI allows programs to access up to
-	 * a few hundred bytes below the stack pointer.
-	 * The kernel signal delivery code writes up to about 1.5kB
-	 * below the stack pointer (r1) before decrementing it.
-	 * The exec code can write slightly over 640kB to the stack
-	 * before setting the user r1.  Thus we allow the stack to
-	 * expand to 1MB without further checks.
-	 */
-	if (address + 0x100000 < vma->vm_end) {
-		/* get user regs even if this fault is in kernel mode */
-		struct pt_regs *uregs = current->thread.regs;
-		if (uregs == NULL)
-			goto bad_area;
-
-		/*
-		 * A user-mode access to an address a long way below
-		 * the stack pointer is only valid if the instruction
-		 * is one which would update the stack pointer to the
-		 * address accessed if the instruction completed,
-		 * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
-		 * (or the byte, halfword, float or double forms).
-		 *
-		 * If we don't check this then any write to the area
-		 * between the last mapped region and the stack will
-		 * expand the stack rather than segfaulting.
-		 */
-		if (address + 2048 < uregs->gpr[1]
-		    && (!user_mode(regs) || !store_updates_sp(regs)))
-			goto bad_area;
-	}
-	if (expand_stack(vma, address))
-		goto bad_area;
-
-good_area:
-	code = SEGV_ACCERR;
-#if defined(CONFIG_6xx)
-	if (error_code & 0x95700000)
-		/* an error such as lwarx to I/O controller space,
-		   address matching DABR, eciwx, etc. */
-		goto bad_area;
-#endif /* CONFIG_6xx */
-#if defined(CONFIG_8xx)
-        /* The MPC8xx seems to always set 0x80000000, which is
-         * "undefined".  Of those that can be set, this is the only
-         * one which seems bad.
-         */
-	if (error_code & 0x10000000)
-                /* Guarded storage error. */
-		goto bad_area;
-#endif /* CONFIG_8xx */
-
-	/* a write */
-	if (is_write) {
-		if (!(vma->vm_flags & VM_WRITE))
-			goto bad_area;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* an exec  - 4xx/Book-E allows for per-page execute permission */
-	} else if (TRAP(regs) == 0x400) {
-		pte_t *ptep;
-		pmd_t *pmdp;
-
-#if 0
-		/* It would be nice to actually enforce the VM execute
-		   permission on CPUs which can do so, but far too
-		   much stuff in userspace doesn't get the permissions
-		   right, so we let any page be executed for now. */
-		if (! (vma->vm_flags & VM_EXEC))
-			goto bad_area;
-#endif
-
-		/* Since 4xx/Book-E supports per-page execute permission,
-		 * we lazily flush dcache to icache. */
-		ptep = NULL;
-		if (get_pteptr(mm, address, &ptep, &pmdp)) {
-			spinlock_t *ptl = pte_lockptr(mm, pmdp);
-			spin_lock(ptl);
-			if (pte_present(*ptep)) {
-				struct page *page = pte_page(*ptep);
-
-				if (!test_bit(PG_arch_1, &page->flags)) {
-					flush_dcache_icache_page(page);
-					set_bit(PG_arch_1, &page->flags);
-				}
-				pte_update(ptep, 0, _PAGE_HWEXEC);
-				_tlbie(address, mm->context.id);
-				pte_unmap_unlock(ptep, ptl);
-				up_read(&mm->mmap_sem);
-				return 0;
-			}
-			pte_unmap_unlock(ptep, ptl);
-		}
-#endif
-	/* a read */
-	} else {
-		/* protection fault */
-		if (error_code & 0x08000000)
-			goto bad_area;
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
-			goto bad_area;
-	}
-
-	/*
-	 * If for any reason at all we couldn't handle the fault,
-	 * make sure we exit gracefully rather than endlessly redo
-	 * the fault.
-	 */
- survive:
-	fault = handle_mm_fault(mm, vma, address, is_write);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto do_sigbus;
-		BUG();
-	}
-	if (fault & VM_FAULT_MAJOR)
-		current->maj_flt++;
-	else
-		current->min_flt++;
-
-	up_read(&mm->mmap_sem);
-	/*
-	 * keep track of tlb+htab misses that are good addrs but
-	 * just need pte's created via handle_mm_fault()
-	 * -- Cort
-	 */
-	pte_misses++;
-	return 0;
-
-bad_area:
-	up_read(&mm->mmap_sem);
-	pte_errors++;
-
-	/* User mode accesses cause a SIGSEGV */
-	if (user_mode(regs)) {
-		_exception(SIGSEGV, regs, code, address);
-		return 0;
-	}
-
-	return SIGSEGV;
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
-	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	return SIGKILL;
-
-do_sigbus:
-	up_read(&mm->mmap_sem);
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRERR;
-	info.si_addr = (void __user *)address;
-	force_sig_info (SIGBUS, &info, current);
-	if (!user_mode(regs))
-		return SIGBUS;
-	return 0;
-}
-
-/*
- * bad_page_fault is called when we have a bad access from the kernel.
- * It is called from the DSI and ISI handlers in head.S and from some
- * of the procedures in traps.c.
- */
-void
-bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
-{
-	const struct exception_table_entry *entry;
-
-	/* Are we prepared to handle this fault?  */
-	if ((entry = search_exception_tables(regs->nip)) != NULL) {
-		regs->nip = entry->fixup;
-		return;
-	}
-
-	/* kernel has accessed a bad area */
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-	if (debugger_kernel_faults)
-		debugger(regs);
-#endif
-	die("kernel access of bad area", regs, sig);
-}
-
-#ifdef CONFIG_8xx
-
-/* The pgtable.h claims some functions generically exist, but I
- * can't find them......
- */
-pte_t *va_to_pte(unsigned long address)
-{
-	pgd_t *dir;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	if (address < TASK_SIZE)
-		return NULL;
-
-	dir = pgd_offset(&init_mm, address);
-	if (dir) {
-		pmd = pmd_offset(dir, address & PAGE_MASK);
-		if (pmd && pmd_present(*pmd)) {
-			pte = pte_offset_kernel(pmd, address & PAGE_MASK);
-			if (pte && pte_present(*pte))
-				return(pte);
-		}
-	}
-	return NULL;
-}
-
-unsigned long va_to_phys(unsigned long address)
-{
-	pte_t *pte;
-
-	pte = va_to_pte(address);
-	if (pte)
-		return(((unsigned long)(pte_val(*pte)) & PAGE_MASK) | (address & ~(PAGE_MASK)));
-	return (0);
-}
-
-void
-print_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-        pgd_t * pgd;
-        pmd_t * pmd;
-        pte_t * pte;
-
-        printk(" pte @ 0x%8lx: ", addr);
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd && pmd_present(*pmd)) {
-                        pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-                        if (pte) {
-                                printk(" (0x%08lx)->(0x%08lx)->0x%08lx\n",
-                                        (long)pgd, (long)pte, (long)pte_val(*pte));
-#define pp ((long)pte_val(*pte))			
-				printk(" RPN: %05lx PP: %lx SPS: %lx SH: %lx "
-				       "CI: %lx v: %lx\n",
-				       pp>>12,    /* rpn */
-				       (pp>>10)&3, /* pp */
-				       (pp>>3)&1, /* small */
-				       (pp>>2)&1, /* shared */
-				       (pp>>1)&1, /* cache inhibit */
-				       pp&1       /* valid */
-				       );
-#undef pp			
-                        }
-                        else {
-                                printk("no pte\n");
-                        }
-                }
-                else {
-                        printk("no pmd\n");
-                }
-        }
-        else {
-                printk("no pgd\n");
-        }
-}
-
-int
-get_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-        pgd_t * pgd;
-        pmd_t * pmd;
-        pte_t * pte;
-        int     retval = 0;
-
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd && pmd_present(*pmd)) {
-                        pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-                        if (pte) {
-				retval = (int)pte_val(*pte);
-                        }
-                }
-        }
-        return(retval);
-}
-#endif /* CONFIG_8xx */
diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S
deleted file mode 100644
index 5f364dc50154..000000000000
--- a/arch/ppc/mm/hashtable.S
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- *  $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *
- *  This file contains low-level assembler routines for managing
- *  the PowerPC MMU hash table.  (PPC 8xx processors don't use a
- *  hash table, so this file is not used on them.)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_SMP
-	.section .bss
-	.align	2
-	.globl mmu_hash_lock
-mmu_hash_lock:
-	.space	4
-#endif /* CONFIG_SMP */
-
-/*
- * Sync CPUs with hash_page taking & releasing the hash
- * table lock
- */
-#ifdef CONFIG_SMP
-	.text
-_GLOBAL(hash_page_sync)
-	lis	r8,mmu_hash_lock@h
-	ori	r8,r8,mmu_hash_lock@l
-	lis	r0,0x0fff
-	b	10f
-11:	lwz	r6,0(r8)
-	cmpwi	0,r6,0
-	bne	11b
-10:	lwarx	r6,0,r8
-	cmpwi	0,r6,0
-	bne-	11b
-	stwcx.	r0,0,r8
-	bne-	10b
-	isync
-	eieio
-	li	r0,0
-	stw	r0,0(r8)
-	blr	
-#endif
-
-/*
- * Load a PTE into the hash table, if possible.
- * The address is in r4, and r3 contains an access flag:
- * _PAGE_RW (0x400) if a write.
- * r9 contains the SRR1 value, from which we use the MSR_PR bit.
- * SPRG3 contains the physical address of the current task's thread.
- *
- * Returns to the caller if the access is illegal or there is no
- * mapping for the address.  Otherwise it places an appropriate PTE
- * in the hash table and returns from the exception.
- * Uses r0, r3 - r8, ctr, lr.
- */
-	.text
-_GLOBAL(hash_page)
-	tophys(r7,0)			/* gets -KERNELBASE into r7 */
-#ifdef CONFIG_SMP
-	addis	r8,r7,mmu_hash_lock@h
-	ori	r8,r8,mmu_hash_lock@l
-	lis	r0,0x0fff
-	b	10f
-11:	lwz	r6,0(r8)
-	cmpwi	0,r6,0
-	bne	11b
-10:	lwarx	r6,0,r8
-	cmpwi	0,r6,0
-	bne-	11b
-	stwcx.	r0,0,r8
-	bne-	10b
-	isync
-#endif
-	/* Get PTE (linux-style) and check access */
-	lis	r0,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r4,r0
-	mfspr	r8,SPRN_SPRG3		/* current task's THREAD (phys) */
-	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
-	lwz	r5,PGDIR(r8)		/* virt page-table root */
-	blt+	112f			/* assume user more likely */
-	lis	r5,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r5,r5,swapper_pg_dir@l	/* kernel page table */
-	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
-112:	add	r5,r5,r7		/* convert to phys addr */
-	rlwimi	r5,r4,12,20,29		/* insert top 10 bits of address */
-	lwz	r8,0(r5)		/* get pmd entry */
-	rlwinm.	r8,r8,0,0,19		/* extract address of pte page */
-#ifdef CONFIG_SMP
-	beq-	hash_page_out		/* return if no mapping */
-#else
-	/* XXX it seems like the 601 will give a machine fault on the
-	   rfi if its alignment is wrong (bottom 4 bits of address are
-	   8 or 0xc) and we have had a not-taken conditional branch
-	   to the address following the rfi. */
-	beqlr-
-#endif
-	rlwimi	r8,r4,22,20,29		/* insert next 10 bits of address */
-	rlwinm	r0,r3,32-3,24,24	/* _PAGE_RW access -> _PAGE_DIRTY */
-	ori	r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
-
-	/*
-	 * Update the linux PTE atomically.  We do the lwarx up-front
-	 * because almost always, there won't be a permission violation
-	 * and there won't already be an HPTE, and thus we will have
-	 * to update the PTE to set _PAGE_HASHPTE.  -- paulus.
-	 */
-retry:
-	lwarx	r6,0,r8			/* get linux-style pte */
-	andc.	r5,r3,r6		/* check access & ~permission */
-#ifdef CONFIG_SMP
-	bne-	hash_page_out		/* return if access not permitted */
-#else
-	bnelr-
-#endif
-	or	r5,r0,r6		/* set accessed/dirty bits */
-	stwcx.	r5,0,r8			/* attempt to update PTE */
-	bne-	retry			/* retry if someone got there first */
-
-	mfsrin	r3,r4			/* get segment reg for segment */
-	mfctr	r0
-	stw	r0,_CTR(r11)
-	bl	create_hpte		/* add the hash table entry */
-
-/*
- * htab_reloads counts the number of times we have to fault an
- * HPTE into the hash table.  This should only happen after a
- * fork (because fork does a flush_tlb_mm) or a vmalloc or ioremap.
- * Where a page is faulted into a process's address space,
- * update_mmu_cache gets called to put the HPTE into the hash table
- * and those are counted as preloads rather than reloads.
- */
-	addis	r8,r7,htab_reloads@ha
-	lwz	r3,htab_reloads@l(r8)
-	addi	r3,r3,1
-	stw	r3,htab_reloads@l(r8)
-
-#ifdef CONFIG_SMP
-	eieio
-	addis	r8,r7,mmu_hash_lock@ha
-	li	r0,0
-	stw	r0,mmu_hash_lock@l(r8)
-#endif
-
-	/* Return from the exception */
-	lwz	r5,_CTR(r11)
-	mtctr	r5
-	lwz	r0,GPR0(r11)
-	lwz	r7,GPR7(r11)
-	lwz	r8,GPR8(r11)
-	b	fast_exception_return
-
-#ifdef CONFIG_SMP
-hash_page_out:
-	eieio
-	addis	r8,r7,mmu_hash_lock@ha
-	li	r0,0
-	stw	r0,mmu_hash_lock@l(r8)
-	blr
-#endif /* CONFIG_SMP */
-
-/*
- * Add an entry for a particular page to the hash table.
- *
- * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval)
- *
- * We assume any necessary modifications to the pte (e.g. setting
- * the accessed bit) have already been done and that there is actually
- * a hash table in use (i.e. we're not on a 603).
- */
-_GLOBAL(add_hash_page)
-	mflr	r0
-	stw	r0,4(r1)
-
-	/* Convert context and va to VSID */
-	mulli	r3,r3,897*16		/* multiply context by context skew */
-	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
-	mulli	r0,r0,0x111		/* multiply by ESID skew */
-	add	r3,r3,r0		/* note create_hpte trims to 24 bits */
-
-#ifdef CONFIG_SMP
-	rlwinm	r8,r1,0,0,18		/* use cpu number to make tag */
-	lwz	r8,TI_CPU(r8)		/* to go in mmu_hash_lock */
-	oris	r8,r8,12
-#endif /* CONFIG_SMP */
-
-	/*
-	 * We disable interrupts here, even on UP, because we don't
-	 * want to race with hash_page, and because we want the
-	 * _PAGE_HASHPTE bit to be a reliable indication of whether
-	 * the HPTE exists (or at least whether one did once).
-	 * We also turn off the MMU for data accesses so that we
-	 * we can't take a hash table miss (assuming the code is
-	 * covered by a BAT).  -- paulus
-	 */
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-
-	tophys(r7,0)
-
-#ifdef CONFIG_SMP
-	addis	r9,r7,mmu_hash_lock@ha
-	addi	r9,r9,mmu_hash_lock@l
-10:	lwarx	r0,0,r9			/* take the mmu_hash_lock */
-	cmpi	0,r0,0
-	bne-	11f
-	stwcx.	r8,0,r9
-	beq+	12f
-11:	lwz	r0,0(r9)
-	cmpi	0,r0,0
-	beq	10b
-	b	11b
-12:	isync
-#endif
-
-	/*
-	 * Fetch the linux pte and test and set _PAGE_HASHPTE atomically.
-	 * If _PAGE_HASHPTE was already set, we don't replace the existing
-	 * HPTE, so we just unlock and return.
-	 */
-	mr	r8,r5
-	rlwimi	r8,r4,22,20,29
-1:	lwarx	r6,0,r8
-	andi.	r0,r6,_PAGE_HASHPTE
-	bne	9f			/* if HASHPTE already set, done */
-	ori	r5,r6,_PAGE_HASHPTE
-	stwcx.	r5,0,r8
-	bne-	1b
-
-	bl	create_hpte
-
-	addis	r8,r7,htab_preloads@ha
-	lwz	r3,htab_preloads@l(r8)
-	addi	r3,r3,1
-	stw	r3,htab_preloads@l(r8)
-
-9:
-#ifdef CONFIG_SMP
-	eieio
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-#endif
-
-	/* reenable interrupts and DR */
-	mtmsr	r10
-	SYNC_601
-	isync
-
-	lwz	r0,4(r1)
-	mtlr	r0
-	blr
-
-/*
- * This routine adds a hardware PTE to the hash table.
- * It is designed to be called with the MMU either on or off.
- * r3 contains the VSID, r4 contains the virtual address,
- * r5 contains the linux PTE, r6 contains the old value of the
- * linux PTE (before setting _PAGE_HASHPTE) and r7 contains the
- * offset to be added to addresses (0 if the MMU is on,
- * -KERNELBASE if it is off).
- * On SMP, the caller should have the mmu_hash_lock held.
- * We assume that the caller has (or will) set the _PAGE_HASHPTE
- * bit in the linux PTE in memory.  The value passed in r6 should
- * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set
- * this routine will skip the search for an existing HPTE.
- * This procedure modifies r0, r3 - r6, r8, cr0.
- *  -- paulus.
- *
- * For speed, 4 of the instructions get patched once the size and
- * physical address of the hash table are known.  These definitions
- * of Hash_base and Hash_bits below are just an example.
- */
-Hash_base = 0xc0180000
-Hash_bits = 12				/* e.g. 256kB hash table */
-Hash_msk = (((1 << Hash_bits) - 1) * 64)
-
-/* defines for the PTE format for 32-bit PPCs */
-#define PTE_SIZE	8
-#define PTEG_SIZE	64
-#define LG_PTEG_SIZE	6
-#define LDPTEu		lwzu
-#define STPTE		stw
-#define CMPPTE		cmpw
-#define PTE_H		0x40
-#define PTE_V		0x80000000
-#define TST_V(r)	rlwinm. r,r,0,0,0
-#define SET_V(r)	oris r,r,PTE_V@h
-#define CLR_V(r,t)	rlwinm r,r,0,1,31
-
-#define HASH_LEFT	31-(LG_PTEG_SIZE+Hash_bits-1)
-#define HASH_RIGHT	31-LG_PTEG_SIZE
-
-_GLOBAL(create_hpte)
-	/* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
-	rlwinm	r8,r5,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r0,r5,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r8,r8,r0		/* writable if _RW & _DIRTY */
-	rlwimi	r5,r5,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r5,r5,32-2,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r8,r8,0xe14		/* clear out reserved bits and M */
-	andc	r8,r5,r8		/* PP = user? (rw&dirty? 2: 3): 0 */
-BEGIN_FTR_SECTION
-	ori	r8,r8,_PAGE_COHERENT	/* set M (coherence required) */
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
-
-	/* Construct the high word of the PPC-style PTE (r5) */
-	rlwinm	r5,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
-	rlwimi	r5,r4,10,26,31		/* put in API (abbrev page index) */
-	SET_V(r5)			/* set V (valid) bit */
-
-	/* Get the address of the primary PTE group in the hash table (r3) */
-_GLOBAL(hash_page_patch_A)
-	addis	r0,r7,Hash_base@h	/* base address of hash table */
-	rlwimi	r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
-	rlwinm	r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
-	xor	r3,r3,r0		/* make primary hash */
-	li	r0,8			/* PTEs/group */
-
-	/*
-	 * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search
-	 * if it is clear, meaning that the HPTE isn't there already...
-	 */
-	andi.	r6,r6,_PAGE_HASHPTE
-	beq+	10f			/* no PTE: go look for an empty slot */
-	tlbie	r4
-
-	addis	r4,r7,htab_hash_searches@ha
-	lwz	r6,htab_hash_searches@l(r4)
-	addi	r6,r6,1			/* count how many searches we do */
-	stw	r6,htab_hash_searches@l(r4)
-
-	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
-	mtctr	r0
-	addi	r4,r3,-PTE_SIZE
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
-	CMPPTE	0,r6,r5
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_slot
-
-	/* Search the secondary PTEG for a matching PTE */
-	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
-_GLOBAL(hash_page_patch_B)
-	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
-	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
-	CMPPTE	0,r6,r5
-	bdnzf	2,2b
-	beq+	found_slot
-	xori	r5,r5,PTE_H		/* clear H bit again */
-
-	/* Search the primary PTEG for an empty slot */
-10:	mtctr	r0
-	addi	r4,r3,-PTE_SIZE		/* search primary PTEG */
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
-	TST_V(r6)			/* test valid bit */
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_empty
-
-	/* update counter of times that the primary PTEG is full */
-	addis	r4,r7,primary_pteg_full@ha
-	lwz	r6,primary_pteg_full@l(r4)
-	addi	r6,r6,1
-	stw	r6,primary_pteg_full@l(r4)
-
-	/* Search the secondary PTEG for an empty slot */
-	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
-_GLOBAL(hash_page_patch_C)
-	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
-	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
-	TST_V(r6)
-	bdnzf	2,2b
-	beq+	found_empty
-	xori	r5,r5,PTE_H		/* clear H bit again */
-
-	/*
-	 * Choose an arbitrary slot in the primary PTEG to overwrite.
-	 * Since both the primary and secondary PTEGs are full, and we
-	 * have no information that the PTEs in the primary PTEG are
-	 * more important or useful than those in the secondary PTEG,
-	 * and we know there is a definite (although small) speed
-	 * advantage to putting the PTE in the primary PTEG, we always
-	 * put the PTE in the primary PTEG.
-	 */
-	addis	r4,r7,next_slot@ha
-	lwz	r6,next_slot@l(r4)
-	addi	r6,r6,PTE_SIZE
-	andi.	r6,r6,7*PTE_SIZE
-	stw	r6,next_slot@l(r4)
-	add	r4,r3,r6
-
-	/* update counter of evicted pages */
-	addis	r6,r7,htab_evicts@ha
-	lwz	r3,htab_evicts@l(r6)
-	addi	r3,r3,1
-	stw	r3,htab_evicts@l(r6)
-
-#ifndef CONFIG_SMP
-	/* Store PTE in PTEG */
-found_empty:
-	STPTE	r5,0(r4)
-found_slot:
-	STPTE	r8,PTE_SIZE/2(r4)
-
-#else /* CONFIG_SMP */
-/*
- * Between the tlbie above and updating the hash table entry below,
- * another CPU could read the hash table entry and put it in its TLB.
- * There are 3 cases:
- * 1. using an empty slot
- * 2. updating an earlier entry to change permissions (i.e. enable write)
- * 3. taking over the PTE for an unrelated address
- *
- * In each case it doesn't really matter if the other CPUs have the old
- * PTE in their TLB.  So we don't need to bother with another tlbie here,
- * which is convenient as we've overwritten the register that had the
- * address. :-)  The tlbie above is mainly to make sure that this CPU comes
- * and gets the new PTE from the hash table.
- *
- * We do however have to make sure that the PTE is never in an invalid
- * state with the V bit set.
- */
-found_empty:
-found_slot:
-	CLR_V(r5,r0)		/* clear V (valid) bit in PTE */
-	STPTE	r5,0(r4)
-	sync
-	TLBSYNC
-	STPTE	r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
-	sync
-	SET_V(r5)
-	STPTE	r5,0(r4)	/* finally set V bit in PTE */
-#endif /* CONFIG_SMP */
-
-	sync		/* make sure pte updates get to memory */
-	blr
-
-	.section .bss
-	.align	2
-next_slot:
-	.space	4
-	.globl primary_pteg_full
-primary_pteg_full:
-	.space	4
-	.globl htab_hash_searches
-htab_hash_searches:
-	.space	4
-	.previous
-
-/*
- * Flush the entry for a particular page from the hash table.
- *
- * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval,
- *		    int count)
- *
- * We assume that there is a hash table in use (Hash != 0).
- */
-_GLOBAL(flush_hash_pages)
-	tophys(r7,0)
-
-	/*
-	 * We disable interrupts here, even on UP, because we want
-	 * the _PAGE_HASHPTE bit to be a reliable indication of
-	 * whether the HPTE exists (or at least whether one did once).
-	 * We also turn off the MMU for data accesses so that we
-	 * we can't take a hash table miss (assuming the code is
-	 * covered by a BAT).  -- paulus
-	 */
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-
-	/* First find a PTE in the range that has _PAGE_HASHPTE set */
-	rlwimi	r5,r4,22,20,29
-1:	lwz	r0,0(r5)
-	cmpwi	cr1,r6,1
-	andi.	r0,r0,_PAGE_HASHPTE
-	bne	2f
-	ble	cr1,19f
-	addi	r4,r4,0x1000
-	addi	r5,r5,4
-	addi	r6,r6,-1
-	b	1b
-
-	/* Convert context and va to VSID */
-2:	mulli	r3,r3,897*16		/* multiply context by context skew */
-	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
-	mulli	r0,r0,0x111		/* multiply by ESID skew */
-	add	r3,r3,r0		/* note code below trims to 24 bits */
-
-	/* Construct the high word of the PPC-style PTE (r11) */
-	rlwinm	r11,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
-	rlwimi	r11,r4,10,26,31		/* put in API (abbrev page index) */
-	SET_V(r11)			/* set V (valid) bit */
-
-#ifdef CONFIG_SMP
-	addis	r9,r7,mmu_hash_lock@ha
-	addi	r9,r9,mmu_hash_lock@l
-	rlwinm	r8,r1,0,0,18
-	add	r8,r8,r7
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,9
-10:	lwarx	r0,0,r9
-	cmpi	0,r0,0
-	bne-	11f
-	stwcx.	r8,0,r9
-	beq+	12f
-11:	lwz	r0,0(r9)
-	cmpi	0,r0,0
-	beq	10b
-	b	11b
-12:	isync
-#endif
-
-	/*
-	 * Check the _PAGE_HASHPTE bit in the linux PTE.  If it is
-	 * already clear, we're done (for this pte).  If not,
-	 * clear it (atomically) and proceed.  -- paulus.
-	 */
-33:	lwarx	r8,0,r5			/* fetch the pte */
-	andi.	r0,r8,_PAGE_HASHPTE
-	beq	8f			/* done if HASHPTE is already clear */
-	rlwinm	r8,r8,0,31,29		/* clear HASHPTE bit */
-	stwcx.	r8,0,r5			/* update the pte */
-	bne-	33b
-
-	/* Get the address of the primary PTE group in the hash table (r3) */
-_GLOBAL(flush_hash_patch_A)
-	addis	r8,r7,Hash_base@h	/* base address of hash table */
-	rlwimi	r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
-	rlwinm	r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
-	xor	r8,r0,r8		/* make primary hash */
-
-	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
-	li	r0,8			/* PTEs/group */
-	mtctr	r0
-	addi	r12,r8,-PTE_SIZE
-1:	LDPTEu	r0,PTE_SIZE(r12)	/* get next PTE */
-	CMPPTE	0,r0,r11
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	3f
-
-	/* Search the secondary PTEG for a matching PTE */
-	ori	r11,r11,PTE_H		/* set H (secondary hash) bit */
-	li	r0,8			/* PTEs/group */
-_GLOBAL(flush_hash_patch_B)
-	xoris	r12,r8,Hash_msk>>16	/* compute secondary hash */
-	xori	r12,r12,(-PTEG_SIZE & 0xffff)
-	addi	r12,r12,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r0,PTE_SIZE(r12)
-	CMPPTE	0,r0,r11
-	bdnzf	2,2b
-	xori	r11,r11,PTE_H		/* clear H again */
-	bne-	4f			/* should rarely fail to find it */
-
-3:	li	r0,0
-	STPTE	r0,0(r12)		/* invalidate entry */
-4:	sync
-	tlbie	r4			/* in hw tlb too */
-	sync
-
-8:	ble	cr1,9f			/* if all ptes checked */
-81:	addi	r6,r6,-1
-	addi	r5,r5,4			/* advance to next pte */
-	addi	r4,r4,0x1000
-	lwz	r0,0(r5)		/* check next pte */
-	cmpwi	cr1,r6,1
-	andi.	r0,r0,_PAGE_HASHPTE
-	bne	33b
-	bgt	cr1,81b
-
-9:
-#ifdef CONFIG_SMP
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-#endif
-
-19:	mtmsr	r10
-	SYNC_601
-	isync
-	blr
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
deleted file mode 100644
index 1a63711081b5..000000000000
--- a/arch/ppc/mm/init.c
+++ /dev/null
@@ -1,603 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/highmem.h>
-#include <linux/initrd.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/btext.h>
-#include <asm/tlb.h>
-#include <asm/bootinfo.h>
-
-#include "mem_pieces.h"
-#include "mmu_decl.h"
-
-#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
-#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE))
-#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
-#endif
-#endif
-#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
-
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-unsigned long total_memory;
-unsigned long total_lowmem;
-
-unsigned long ppc_memstart;
-unsigned long ppc_memoffset = PAGE_OFFSET;
-
-int mem_init_done;
-int init_bootmem_done;
-int boot_mapsize;
-
-extern char _end[];
-extern char etext[], _stext[];
-extern char __init_begin, __init_end;
-
-#ifdef CONFIG_HIGHMEM
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-EXPORT_SYMBOL(kmap_prot);
-EXPORT_SYMBOL(kmap_pte);
-#endif
-
-void MMU_init(void);
-void set_phys_avail(unsigned long total_ram);
-
-/* XXX should be in current.h  -- paulus */
-extern struct task_struct *current_set[NR_CPUS];
-
-char *klimit = _end;
-struct mem_pieces phys_avail;
-
-/*
- * this tells the system to map all of ram with the segregs
- * (i.e. page tables) instead of the bats.
- * -- Cort
- */
-int __map_without_bats;
-int __map_without_ltlbs;
-
-/* max amount of RAM to use */
-unsigned long __max_memory;
-/* max amount of low RAM to map in */
-unsigned long __max_low_memory = MAX_LOW_MEM;
-
-void show_mem(void)
-{
-	int i,free = 0,total = 0,reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageHighMem(mem_map+i))
-			highmem++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else
-			shared += page_count(mem_map+i) - 1;
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d pages of HIGHMEM\n", highmem);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
-/* Free up now-unused memory */
-static void free_sec(unsigned long start, unsigned long end, const char *name)
-{
-	unsigned long cnt = 0;
-
-	while (start < end) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		cnt++;
-		start += PAGE_SIZE;
- 	}
-	if (cnt) {
-		printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name);
-		totalram_pages += cnt;
-	}
-}
-
-void free_initmem(void)
-{
-#define FREESEC(TYPE) \
-	free_sec((unsigned long)(&__ ## TYPE ## _begin), \
-		 (unsigned long)(&__ ## TYPE ## _end), \
-		 #TYPE);
-
-	printk ("Freeing unused kernel memory:");
-	FREESEC(init);
- 	printk("\n");
-	ppc_md.progress = NULL;
-#undef FREESEC
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
-	printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
-
-	for (; start < end; start += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		totalram_pages++;
-	}
-}
-#endif
-
-/*
- * Check for command-line options that affect what MMU_init will do.
- */
-void MMU_setup(void)
-{
-	/* Check for nobats option (used in mapin_ram). */
-	if (strstr(cmd_line, "nobats")) {
-		__map_without_bats = 1;
-	}
-
-	if (strstr(cmd_line, "noltlbs")) {
-		__map_without_ltlbs = 1;
-	}
-
-	/* Look for mem= option on command line */
-	if (strstr(cmd_line, "mem=")) {
-		char *p, *q;
-		unsigned long maxmem = 0;
-
-		for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
-			q = p + 4;
-			if (p > cmd_line && p[-1] != ' ')
-				continue;
-			maxmem = simple_strtoul(q, &q, 0);
-			if (*q == 'k' || *q == 'K') {
-				maxmem <<= 10;
-				++q;
-			} else if (*q == 'm' || *q == 'M') {
-				maxmem <<= 20;
-				++q;
-			}
-		}
-		__max_memory = maxmem;
-	}
-}
-
-/*
- * MMU_init sets up the basic memory mappings for the kernel,
- * including both RAM and possibly some I/O regions,
- * and sets up the page tables and the MMU hardware ready to go.
- */
-void __init MMU_init(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:enter", 0x111);
-
-	/* parse args from command line */
-	MMU_setup();
-
-	/*
-	 * Figure out how much memory we have, how much
-	 * is lowmem, and how much is highmem.  If we were
-	 * passed the total memory size from the bootloader,
-	 * just use it.
-	 */
-	if (boot_mem_size)
-		total_memory = boot_mem_size;
-	else
-		total_memory = ppc_md.find_end_of_memory();
-
-	if (__max_memory && total_memory > __max_memory)
-		total_memory = __max_memory;
-	total_lowmem = total_memory;
-	if (total_lowmem > __max_low_memory) {
-		total_lowmem = __max_low_memory;
-#ifndef CONFIG_HIGHMEM
-		total_memory = total_lowmem;
-#endif /* CONFIG_HIGHMEM */
-	}
-	set_phys_avail(total_lowmem);
-
-	/* Initialize the MMU hardware */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:hw init", 0x300);
-	MMU_init_hw();
-
-	/* Map in all of RAM starting at KERNELBASE */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:mapin", 0x301);
-	mapin_ram();
-
-#ifdef CONFIG_HIGHMEM
-	ioremap_base = PKMAP_BASE;
-#else
-	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
-	ioremap_bot = ioremap_base;
-
-	/* Map in I/O resources */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:setio", 0x302);
-	if (ppc_md.setup_io_mappings)
-		ppc_md.setup_io_mappings();
-
-	/* Initialize the context management stuff */
-	mmu_context_init();
-
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:exit", 0x211);
-
-#ifdef CONFIG_BOOTX_TEXT
-	/* By default, we are no longer mapped */
-       	boot_text_mapped = 0;
-	/* Must be done last, or ppc_md.progress will die. */
-	map_boot_text();
-#endif
-}
-
-/* This is only called until mem_init is done. */
-void __init *early_get_page(void)
-{
-	void *p;
-
-	if (init_bootmem_done) {
-		p = alloc_bootmem_pages(PAGE_SIZE);
-	} else {
-		p = mem_pieces_find(PAGE_SIZE, PAGE_SIZE);
-	}
-	return p;
-}
-
-/*
- * Initialize the bootmem system and give it all the memory we
- * have available.
- */
-void __init do_init_bootmem(void)
-{
-	unsigned long start, size;
-	int i;
-
-	/*
-	 * Find an area to use for the bootmem bitmap.
-	 * We look for the first area which is at least
-	 * 128kB in length (128kB is enough for a bitmap
-	 * for 4GB of memory, using 4kB pages), plus 1 page
-	 * (in case the address isn't page-aligned).
-	 */
-	start = 0;
-	size = 0;
-	for (i = 0; i < phys_avail.n_regions; ++i) {
-		unsigned long a = phys_avail.regions[i].address;
-		unsigned long s = phys_avail.regions[i].size;
-		if (s <= size)
-			continue;
-		start = a;
-		size = s;
-		if (s >= 33 * PAGE_SIZE)
-			break;
-	}
-	start = PAGE_ALIGN(start);
-
-	min_low_pfn = start >> PAGE_SHIFT;
-	max_low_pfn = (PPC_MEMSTART + total_lowmem) >> PAGE_SHIFT;
-	max_pfn = (PPC_MEMSTART + total_memory) >> PAGE_SHIFT;
-	boot_mapsize = init_bootmem_node(&contig_page_data, min_low_pfn,
-					 PPC_MEMSTART >> PAGE_SHIFT,
-					 max_low_pfn);
-
-	/* remove the bootmem bitmap from the available memory */
-	mem_pieces_remove(&phys_avail, start, boot_mapsize, 1);
-
-	/* add everything in phys_avail into the bootmem map */
-	for (i = 0; i < phys_avail.n_regions; ++i)
-		free_bootmem(phys_avail.regions[i].address,
-			     phys_avail.regions[i].size);
-
-	init_bootmem_done = 1;
-}
-
-/*
- * paging_init() sets up the page tables - in fact we've already done this.
- */
-void __init paging_init(void)
-{
-	unsigned long start_pfn, end_pfn;
-	unsigned long max_zone_pfns[MAX_NR_ZONES];
-#ifdef CONFIG_HIGHMEM
-	map_page(PKMAP_BASE, 0, 0);	/* XXX gross */
-	pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
-			(PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
-	map_page(KMAP_FIX_BEGIN, 0, 0);	/* XXX gross */
-	kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
-			(KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
-	kmap_prot = PAGE_KERNEL;
-#endif /* CONFIG_HIGHMEM */
-	/* All pages are DMA-able so we put them all in the DMA zone. */
-	start_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
-	end_pfn = start_pfn + (total_memory >> PAGE_SHIFT);
-	add_active_range(0, start_pfn, end_pfn);
-
-	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-#ifdef CONFIG_HIGHMEM
-	max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
-	max_zone_pfns[ZONE_HIGHMEM] = total_memory >> PAGE_SHIFT;
-#else
-	max_zone_pfns[ZONE_DMA] = total_memory >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-	free_area_init_nodes(max_zone_pfns);
-}
-
-void __init mem_init(void)
-{
-	unsigned long addr;
-	int codepages = 0;
-	int datapages = 0;
-	int initpages = 0;
-#ifdef CONFIG_HIGHMEM
-	unsigned long highmem_mapnr;
-
-	highmem_mapnr = total_lowmem >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-	max_mapnr = total_memory >> PAGE_SHIFT;
-
-	high_memory = (void *) __va(PPC_MEMSTART + total_lowmem);
-	num_physpages = max_mapnr;	/* RAM is assumed contiguous */
-
-	totalram_pages += free_all_bootmem();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* if we are booted from BootX with an initial ramdisk,
-	   make sure the ramdisk pages aren't reserved. */
-	if (initrd_start) {
-		for (addr = initrd_start; addr < initrd_end; addr += PAGE_SIZE)
-			ClearPageReserved(virt_to_page(addr));
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory;
-	     addr += PAGE_SIZE) {
-		if (!PageReserved(virt_to_page(addr)))
-			continue;
-		if (addr < (ulong) etext)
-			codepages++;
-		else if (addr >= (unsigned long)&__init_begin
-			 && addr < (unsigned long)&__init_end)
-			initpages++;
-		else if (addr < (ulong) klimit)
-			datapages++;
-	}
-
-#ifdef CONFIG_HIGHMEM
-	{
-		unsigned long pfn;
-
-		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
-			struct page *page = mem_map + pfn;
-
-			ClearPageReserved(page);
-			init_page_count(page);
-			__free_page(page);
-			totalhigh_pages++;
-		}
-		totalram_pages += totalhigh_pages;
-	}
-#endif /* CONFIG_HIGHMEM */
-
-        printk("Memory: %luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n",
-	       (unsigned long)nr_free_pages()<< (PAGE_SHIFT-10),
-	       codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10),
-	       initpages<< (PAGE_SHIFT-10),
-	       (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
-
-	mem_init_done = 1;
-}
-
-/*
- * Set phys_avail to the amount of physical memory,
- * less the kernel text/data/bss.
- */
-void __init
-set_phys_avail(unsigned long total_memory)
-{
-	unsigned long kstart, ksize;
-
-	/*
-	 * Initially, available physical memory is equivalent to all
-	 * physical memory.
-	 */
-
-	phys_avail.regions[0].address = PPC_MEMSTART;
-	phys_avail.regions[0].size = total_memory;
-	phys_avail.n_regions = 1;
-
-	/*
-	 * Map out the kernel text/data/bss from the available physical
-	 * memory.
-	 */
-
-	kstart = __pa(_stext);	/* should be 0 */
-	ksize = PAGE_ALIGN(klimit - _stext);
-
-	mem_pieces_remove(&phys_avail, kstart, ksize, 0);
-	mem_pieces_remove(&phys_avail, 0, 0x4000, 0);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/* Remove the init RAM disk from the available memory. */
-	if (initrd_start) {
-		mem_pieces_remove(&phys_avail, __pa(initrd_start),
-				  initrd_end - initrd_start, 1);
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-
-/* Mark some memory as reserved by removing it from phys_avail. */
-void __init reserve_phys_mem(unsigned long start, unsigned long size)
-{
-	mem_pieces_remove(&phys_avail, start, size, 1);
-}
-
-/*
- * This is called when a page has been modified by the kernel.
- * It just marks the page as not i-cache clean.  We do the i-cache
- * flush later when the page is given to a user process, if necessary.
- */
-void flush_dcache_page(struct page *page)
-{
-	clear_bit(PG_arch_1, &page->flags);
-}
-
-void flush_dcache_icache_page(struct page *page)
-{
-#ifdef CONFIG_BOOKE
-	void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
-	__flush_dcache_icache(start);
-	kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
-#elif defined(CONFIG_8xx)
-	/* On 8xx there is no need to kmap since highmem is not supported */
-	__flush_dcache_icache(page_address(page)); 
-#else
-	__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
-#endif
-
-}
-void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
-{
-	clear_page(page);
-	clear_bit(PG_arch_1, &pg->flags);
-}
-
-void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-		    struct page *pg)
-{
-	copy_page(vto, vfrom);
-	clear_bit(PG_arch_1, &pg->flags);
-}
-
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len)
-{
-	unsigned long maddr;
-
-	maddr = (unsigned long) kmap(page) + (addr & ~PAGE_MASK);
-	flush_icache_range(maddr, maddr + len);
-	kunmap(page);
-}
-
-/*
- * This is called at the end of handling a user page fault, when the
- * fault has been handled by updating a PTE in the linux page tables.
- * We use it to preload an HPTE into the hash table corresponding to
- * the updated linux PTE.
- */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t pte)
-{
-	/* handle i-cache coherency */
-	unsigned long pfn = pte_pfn(pte);
-
-	if (pfn_valid(pfn)) {
-		struct page *page = pfn_to_page(pfn);
-#ifdef CONFIG_8xx
-		/* On 8xx, the TLB handlers work in 2 stages:
-	 	 * First, a zeroed entry is loaded by TLBMiss handler,
-		 * which causes the TLBError handler to be triggered.
-		 * That means the zeroed TLB has to be invalidated
-		 * whenever a page miss occurs.
-		 */
-		_tlbie(address, 0 /* 8xx doesn't care about PID */);
-#endif
-		if (!PageReserved(page)
-		    && !test_bit(PG_arch_1, &page->flags)) {
-			if (vma->vm_mm == current->active_mm)
-				__flush_dcache_icache((void *) address);
-			else
-				flush_dcache_icache_page(page);
-			set_bit(PG_arch_1, &page->flags);
-		}
-	}
-
-#ifdef CONFIG_PPC_STD_MMU
-	/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
-	if (Hash != 0 && pte_young(pte)) {
-		struct mm_struct *mm;
-		pmd_t *pmd;
-
-		mm = (address < TASK_SIZE)? vma->vm_mm: &init_mm;
-		pmd = pmd_offset(pgd_offset(mm, address), address);
-		if (!pmd_none(*pmd))
-			add_hash_page(mm->context.id, address, pmd_val(*pmd));
-	}
-#endif
-}
-
-/*
- * This is called by /dev/mem to know if a given address has to
- * be mapped non-cacheable or not
- */
-int page_is_ram(unsigned long pfn)
-{
-	return pfn < max_pfn;
-}
-
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-			      unsigned long size, pgprot_t vma_prot)
-{
-	if (ppc_md.phys_mem_access_prot)
-		return ppc_md.phys_mem_access_prot(file, pfn, size, vma_prot);
-
-	if (!page_is_ram(pfn))
-		vma_prot = __pgprot(pgprot_val(vma_prot)
-				    | _PAGE_GUARDED | _PAGE_NO_CACHE);
-	return vma_prot;
-}
-EXPORT_SYMBOL(phys_mem_access_prot);
diff --git a/arch/ppc/mm/mem_pieces.c b/arch/ppc/mm/mem_pieces.c
deleted file mode 100644
index 6030a0ddfbb4..000000000000
--- a/arch/ppc/mm/mem_pieces.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Changes to accommodate Power Macintoshes.
- *    Cort Dougan <cort@cs.nmt.edu>
- *      Rewrites.
- *    Grant Erickson <grant@lcse.umn.edu>
- *      General rework and split from mm/init.c.
- *
- *    Module name: mem_pieces.c
- *
- *    Description:
- *      Routines and data structures for manipulating and representing
- *      phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <asm/page.h>
-
-#include "mem_pieces.h"
-
-extern struct mem_pieces phys_avail;
-
-static void mem_pieces_print(struct mem_pieces *);
-
-/*
- * Scan a region for a piece of a given size with the required alignment.
- */
-void __init *
-mem_pieces_find(unsigned int size, unsigned int align)
-{
-	int i;
-	unsigned a, e;
-	struct mem_pieces *mp = &phys_avail;
-
-	for (i = 0; i < mp->n_regions; ++i) {
-		a = mp->regions[i].address;
-		e = a + mp->regions[i].size;
-		a = (a + align - 1) & -align;
-		if (a + size <= e) {
-			mem_pieces_remove(mp, a, size, 1);
-			return (void *) __va(a);
-		}
-	}
-	panic("Couldn't find %u bytes at %u alignment\n", size, align);
-
-	return NULL;
-}
-
-/*
- * Remove some memory from an array of pieces
- */
-void __init
-mem_pieces_remove(struct mem_pieces *mp, unsigned int start, unsigned int size,
-		  int must_exist)
-{
-	int i, j;
-	unsigned int end, rs, re;
-	struct reg_property *rp;
-
-	end = start + size;
-	for (i = 0, rp = mp->regions; i < mp->n_regions; ++i, ++rp) {
-		if (end > rp->address && start < rp->address + rp->size)
-			break;
-	}
-	if (i >= mp->n_regions) {
-		if (must_exist)
-			printk("mem_pieces_remove: [%x,%x) not in any region\n",
-			       start, end);
-		return;
-	}
-	for (; i < mp->n_regions && end > rp->address; ++i, ++rp) {
-		rs = rp->address;
-		re = rs + rp->size;
-		if (must_exist && (start < rs || end > re)) {
-			printk("mem_pieces_remove: bad overlap [%x,%x) with",
-			       start, end);
-			mem_pieces_print(mp);
-			must_exist = 0;
-		}
-		if (start > rs) {
-			rp->size = start - rs;
-			if (end < re) {
-				/* need to split this entry */
-				if (mp->n_regions >= MEM_PIECES_MAX)
-					panic("eek... mem_pieces overflow");
-				for (j = mp->n_regions; j > i + 1; --j)
-					mp->regions[j] = mp->regions[j-1];
-				++mp->n_regions;
-				rp[1].address = end;
-				rp[1].size = re - end;
-			}
-		} else {
-			if (end < re) {
-				rp->address = end;
-				rp->size = re - end;
-			} else {
-				/* need to delete this entry */
-				for (j = i; j < mp->n_regions - 1; ++j)
-					mp->regions[j] = mp->regions[j+1];
-				--mp->n_regions;
-				--i;
-				--rp;
-			}
-		}
-	}
-}
-
-static void __init
-mem_pieces_print(struct mem_pieces *mp)
-{
-	int i;
-
-	for (i = 0; i < mp->n_regions; ++i)
-		printk(" [%x, %x)", mp->regions[i].address,
-		       mp->regions[i].address + mp->regions[i].size);
-	printk("\n");
-}
-
-void __init
-mem_pieces_sort(struct mem_pieces *mp)
-{
-	unsigned long a, s;
-	int i, j;
-
-	for (i = 1; i < mp->n_regions; ++i) {
-		a = mp->regions[i].address;
-		s = mp->regions[i].size;
-		for (j = i - 1; j >= 0; --j) {
-			if (a >= mp->regions[j].address)
-				break;
-			mp->regions[j+1] = mp->regions[j];
-		}
-		mp->regions[j+1].address = a;
-		mp->regions[j+1].size = s;
-	}
-}
-
-void __init
-mem_pieces_coalesce(struct mem_pieces *mp)
-{
-	unsigned long a, s, ns;
-	int i, j, d;
-
-	d = 0;
-	for (i = 0; i < mp->n_regions; i = j) {
-		a = mp->regions[i].address;
-		s = mp->regions[i].size;
-		for (j = i + 1; j < mp->n_regions
-			     && mp->regions[j].address - a <= s; ++j) {
-			ns = mp->regions[j].address + mp->regions[j].size - a;
-			if (ns > s)
-				s = ns;
-		}
-		mp->regions[d].address = a;
-		mp->regions[d].size = s;
-		++d;
-	}
-	mp->n_regions = d;
-}
diff --git a/arch/ppc/mm/mem_pieces.h b/arch/ppc/mm/mem_pieces.h
deleted file mode 100644
index e2b700dc7f18..000000000000
--- a/arch/ppc/mm/mem_pieces.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Changes to accommodate Power Macintoshes.
- *    Cort Dougan <cort@cs.nmt.edu>
- *      Rewrites.
- *    Grant Erickson <grant@lcse.umn.edu>
- *      General rework and split from mm/init.c.
- *
- *    Module name: mem_pieces.h
- *
- *    Description:
- *      Routines and data structures for manipulating and representing
- *      phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#ifndef __MEM_PIECES_H__
-#define	__MEM_PIECES_H__
-
-#include <asm/prom.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* Type Definitions */
-
-#define	MEM_PIECES_MAX	32
-
-struct mem_pieces {
-    int n_regions;
-    struct reg_property regions[MEM_PIECES_MAX];
-};
-
-/* Function Prototypes */
-
-extern void	*mem_pieces_find(unsigned int size, unsigned int align);
-extern void	 mem_pieces_remove(struct mem_pieces *mp, unsigned int start,
-				   unsigned int size, int must_exist);
-extern void	 mem_pieces_coalesce(struct mem_pieces *mp);
-extern void	 mem_pieces_sort(struct mem_pieces *mp);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MEM_PIECES_H__ */
diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c
deleted file mode 100644
index dacf45ced473..000000000000
--- a/arch/ppc/mm/mmu_context.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * This file contains the routines for handling the MMU on those
- * PowerPC implementations where the MMU substantially follows the
- * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * and 8260 implementations but excludes the 8xx and 4xx.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-unsigned long next_mmu_context;
-unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
-#ifdef FEW_CONTEXTS
-atomic_t nr_free_contexts;
-struct mm_struct *context_mm[LAST_CONTEXT+1];
-void steal_context(void);
-#endif /* FEW_CONTEXTS */
-
-/*
- * Initialize the context management stuff.
- */
-void __init
-mmu_context_init(void)
-{
-	/*
-	 * Some processors have too few contexts to reserve one for
-	 * init_mm, and require using context 0 for a normal task.
-	 * Other processors reserve the use of context zero for the kernel.
-	 * This code assumes FIRST_CONTEXT < 32.
-	 */
-	context_map[0] = (1 << FIRST_CONTEXT) - 1;
-	next_mmu_context = FIRST_CONTEXT;
-#ifdef FEW_CONTEXTS
-	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
-#endif /* FEW_CONTEXTS */
-}
-
-#ifdef FEW_CONTEXTS
-/*
- * Steal a context from a task that has one at the moment.
- * This is only used on 8xx and 4xx and we presently assume that
- * they don't do SMP.  If they do then this will have to check
- * whether the MM we steal is in use.
- * We also assume that this is only used on systems that don't
- * use an MMU hash table - this is true for 8xx and 4xx.
- * This isn't an LRU system, it just frees up each context in
- * turn (sort-of pseudo-random replacement :).  This would be the
- * place to implement an LRU scheme if anyone was motivated to do it.
- *  -- paulus
- */
-void
-steal_context(void)
-{
-	struct mm_struct *mm;
-
-	/* free up context `next_mmu_context' */
-	/* if we shouldn't free context 0, don't... */
-	if (next_mmu_context < FIRST_CONTEXT)
-		next_mmu_context = FIRST_CONTEXT;
-	mm = context_mm[next_mmu_context];
-	flush_tlb_mm(mm);
-	destroy_context(mm);
-}
-#endif /* FEW_CONTEXTS */
diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h
deleted file mode 100644
index 5f813e386b87..000000000000
--- a/arch/ppc/mm/mmu_decl.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Declarations of procedures and variables shared between files
- * in arch/ppc/mm/.
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-
-extern void mapin_ram(void);
-extern int map_page(unsigned long va, phys_addr_t pa, int flags);
-extern void setbat(int index, unsigned long virt, unsigned long phys,
-		   unsigned int size, int flags);
-extern void reserve_phys_mem(unsigned long start, unsigned long size);
-extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
-		      unsigned int size, int flags, unsigned int pid);
-extern void invalidate_tlbcam_entry(int index);
-
-extern int __map_without_bats;
-extern unsigned long ioremap_base;
-extern unsigned long ioremap_bot;
-extern unsigned int rtas_data, rtas_size;
-
-extern unsigned long total_memory;
-extern unsigned long total_lowmem;
-extern int mem_init_done;
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-
-extern unsigned int num_tlbcam_entries;
-
-/* ...and now those things that may be slightly different between processor
- * architectures.  -- Dan
- */
-#if defined(CONFIG_8xx)
-#define flush_HPTE(X, va, pg)	_tlbie(va, 0 /* 8xx doesn't care about PID */)
-#define MMU_init_hw()		do { } while(0)
-#define mmu_mapin_ram()		(0UL)
-
-#elif defined(CONFIG_4xx)
-#define flush_HPTE(pid, va, pg)	_tlbie(va, pid)
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-
-#else
-/* anything except 4xx or 8xx */
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-
-/* Be careful....this needs to be updated if we ever encounter 603 SMPs,
- * which includes all new 82xx processors.  We need tlbie/tlbsync here
- * in that case (I think). -- Dan.
- */
-static inline void flush_HPTE(unsigned context, unsigned long va,
-			      unsigned long pdval)
-{
-	if ((Hash != 0) &&
-	    cpu_has_feature(CPU_FTR_HPTE_TABLE))
-		flush_hash_pages(0, va, pdval, 1);
-	else
-		_tlbie(va);
-}
-#endif
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
deleted file mode 100644
index 03a79bff1271..000000000000
--- a/arch/ppc/mm/pgtable.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * This file contains the routines setting up the linux page tables.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-
-#include "mmu_decl.h"
-
-unsigned long ioremap_base;
-unsigned long ioremap_bot;
-int io_bat_index;
-
-#if defined(CONFIG_6xx)
-#define HAVE_BATS	1
-#endif
-
-extern char etext[], _stext[];
-
-#ifdef CONFIG_SMP
-extern void hash_page_sync(void);
-#endif
-
-#ifdef HAVE_BATS
-extern unsigned long v_mapped_by_bats(unsigned long va);
-extern unsigned long p_mapped_by_bats(unsigned long pa);
-void setbat(int index, unsigned long virt, unsigned long phys,
-	    unsigned int size, int flags);
-
-#else /* !HAVE_BATS */
-#define v_mapped_by_bats(x)	(0UL)
-#define p_mapped_by_bats(x)	(0UL)
-#endif /* HAVE_BATS */
-
-#ifdef CONFIG_PTE_64BIT
-/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
-#define PGDIR_ORDER	1
-#else
-#define PGDIR_ORDER	0
-#endif
-
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *ret;
-
-	ret = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, PGDIR_ORDER);
-	return ret;
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_pages((unsigned long)pgd, PGDIR_ORDER);
-}
-
-__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	pte_t *pte;
-	extern int mem_init_done;
-	extern void *early_get_page(void);
-
-	if (mem_init_done) {
-		pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	} else {
-		pte = (pte_t *)early_get_page();
-		if (pte)
-			clear_page(pte);
-	}
-	return pte;
-}
-
-pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	struct page *ptepage;
-
-#ifdef CONFIG_HIGHPTE
-	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
-#else
-	gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
-#endif
-
-	ptepage = alloc_pages(flags, 0);
-	if (ptepage) {
-		clear_highpage(ptepage);
-		pgtable_page_ctor(ptepage);
-	}
-	return ptepage;
-}
-
-void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-#ifdef CONFIG_SMP
-	hash_page_sync();
-#endif
-	free_page((unsigned long)pte);
-}
-
-void pte_free(struct mm_struct *mm, pgtable_t ptepage)
-{
-#ifdef CONFIG_SMP
-	hash_page_sync();
-#endif
-	pgtable_page_dtor(ptepage);
-	__free_page(ptepage);
-}
-
-#ifndef CONFIG_PHYS_64BIT
-void __iomem *
-ioremap(phys_addr_t addr, unsigned long size)
-{
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
-}
-#else /* CONFIG_PHYS_64BIT */
-void __iomem *
-ioremap64(unsigned long long addr, unsigned long size)
-{
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
-}
-
-void __iomem *
-ioremap(phys_addr_t addr, unsigned long size)
-{
-	phys_addr_t addr64 = fixup_bigphys_addr(addr, size);
-
-	return ioremap64(addr64, size);
-}
-#endif /* CONFIG_PHYS_64BIT */
-
-void __iomem *
-__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
-{
-	unsigned long v, i;
-	phys_addr_t p;
-	int err;
-
-	/*
-	 * Choose an address to map it to.
-	 * Once the vmalloc system is running, we use it.
-	 * Before then, we use space going down from ioremap_base
-	 * (ioremap_bot records where we're up to).
-	 */
-	p = addr & PAGE_MASK;
-	size = PAGE_ALIGN(addr + size) - p;
-
-	/*
-	 * If the address lies within the first 16 MB, assume it's in ISA
-	 * memory space
-	 */
-	if (p < 16*1024*1024)
-		p += _ISA_MEM_BASE;
-
-	/*
-	 * Don't allow anybody to remap normal RAM that we're using.
-	 * mem_init() sets high_memory so only do the check after that.
-	 */
-	if ( mem_init_done && (p < virt_to_phys(high_memory)) )
-	{
-		printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p,
-		       __builtin_return_address(0));
-		return NULL;
-	}
-
-	if (size == 0)
-		return NULL;
-
-	/*
-	 * Is it already mapped?  Perhaps overlapped by a previous
-	 * BAT mapping.  If the whole area is mapped then we're done,
-	 * otherwise remap it since we want to keep the virt addrs for
-	 * each request contiguous.
-	 *
-	 * We make the assumption here that if the bottom and top
-	 * of the range we want are mapped then it's mapped to the
-	 * same virt address (and this is contiguous).
-	 *  -- Cort
-	 */
-	if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
-		goto out;
-
-	if (mem_init_done) {
-		struct vm_struct *area;
-		area = get_vm_area(size, VM_IOREMAP);
-		if (area == 0)
-			return NULL;
-		v = (unsigned long) area->addr;
-	} else {
-		v = (ioremap_bot -= size);
-	}
-
-	if ((flags & _PAGE_PRESENT) == 0)
-		flags |= _PAGE_KERNEL;
-	if (flags & _PAGE_NO_CACHE)
-		flags |= _PAGE_GUARDED;
-
-	/*
-	 * Should check if it is a candidate for a BAT mapping
-	 */
-
-	err = 0;
-	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
-		err = map_page(v+i, p+i, flags);
-	if (err) {
-		if (mem_init_done)
-			vunmap((void *)v);
-		return NULL;
-	}
-
-out:
-	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
-}
-
-void iounmap(volatile void __iomem *addr)
-{
-	/*
-	 * If mapped by BATs then there is nothing to do.
-	 * Calling vfree() generates a benign warning.
-	 */
-	if (v_mapped_by_bats((unsigned long)addr)) return;
-
-	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
-		vunmap((void *) (PAGE_MASK & (unsigned long)addr));
-}
-
-void __iomem *ioport_map(unsigned long port, unsigned int len)
-{
-	return (void __iomem *) (port + _IO_BASE);
-}
-
-void ioport_unmap(void __iomem *addr)
-{
-	/* Nothing to do */
-}
-EXPORT_SYMBOL(ioport_map);
-EXPORT_SYMBOL(ioport_unmap);
-
-int
-map_page(unsigned long va, phys_addr_t pa, int flags)
-{
-	pmd_t *pd;
-	pte_t *pg;
-	int err = -ENOMEM;
-
-	/* Use upper 10 bits of VA to index the first level map */
-	pd = pmd_offset(pgd_offset_k(va), va);
-	/* Use middle 10 bits of VA to index the second-level map */
-	pg = pte_alloc_kernel(pd, va);
-	if (pg != 0) {
-		err = 0;
-		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
-		if (mem_init_done)
-			flush_HPTE(0, va, pmd_val(*pd));
-	}
-	return err;
-}
-
-/*
- * Map in all of physical memory starting at KERNELBASE.
- */
-void __init mapin_ram(void)
-{
-	unsigned long v, p, s, f;
-
-	s = mmu_mapin_ram();
-	v = KERNELBASE + s;
-	p = PPC_MEMSTART + s;
-	for (; s < total_lowmem; s += PAGE_SIZE) {
-		if ((char *) v >= _stext && (char *) v < etext)
-			f = _PAGE_RAM_TEXT;
-		else
-			f = _PAGE_RAM;
-		map_page(v, p, f);
-		v += PAGE_SIZE;
-		p += PAGE_SIZE;
-	}
-}
-
-/* is x a power of 4? */
-#define is_power_of_4(x)	is_power_of_2(x) && (ffs(x) & 1)
-
-/*
- * Set up a mapping for a block of I/O.
- * virt, phys, size must all be page-aligned.
- * This should only be called before ioremap is called.
- */
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
-			     unsigned int size, int flags)
-{
-	int i;
-
-	if (virt > KERNELBASE && virt < ioremap_bot)
-		ioremap_bot = ioremap_base = virt;
-
-#ifdef HAVE_BATS
-	/*
-	 * Use a BAT for this if possible...
-	 */
-	if (io_bat_index < 2 && is_power_of_2(size)
-	    && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
-		setbat(io_bat_index, virt, phys, size, flags);
-		++io_bat_index;
-		return;
-	}
-#endif /* HAVE_BATS */
-
-	/* No BATs available, put it in the page tables. */
-	for (i = 0; i < size; i += PAGE_SIZE)
-		map_page(virt + i, phys + i, flags);
-}
-
-/* Scan the real Linux page tables and return a PTE pointer for
- * a virtual address in a context.
- * Returns true (1) if PTE was found, zero otherwise.  The pointer to
- * the PTE pointer is unmodified if PTE is not found.
- */
-int
-get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
-{
-        pgd_t	*pgd;
-        pmd_t	*pmd;
-        pte_t	*pte;
-        int     retval = 0;
-
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd_present(*pmd)) {
-                        pte = pte_offset_map(pmd, addr & PAGE_MASK);
-                        if (pte) {
-				retval = 1;
-				*ptep = pte;
-				if (pmdp)
-					*pmdp = pmd;
-				/* XXX caller needs to do pte_unmap, yuck */
-                        }
-                }
-        }
-        return(retval);
-}
-
-/* Find physical address for this virtual address.  Normally used by
- * I/O functions, but anyone can call it.
- */
-unsigned long iopa(unsigned long addr)
-{
-	unsigned long pa;
-
-	/* I don't know why this won't work on PMacs or CHRP.  It
-	 * appears there is some bug, or there is some implicit
-	 * mapping done not properly represented by BATs or in page
-	 * tables.......I am actively working on resolving this, but
-	 * can't hold up other stuff.  -- Dan
-	 */
-	pte_t *pte;
-	struct mm_struct *mm;
-
-	/* Check the BATs */
-	pa = v_mapped_by_bats(addr);
-	if (pa)
-		return pa;
-
-	/* Allow mapping of user addresses (within the thread)
-	 * for DMA if necessary.
-	 */
-	if (addr < TASK_SIZE)
-		mm = current->mm;
-	else
-		mm = &init_mm;
-
-	pa = 0;
-	if (get_pteptr(mm, addr, &pte, NULL)) {
-		pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
-		pte_unmap(pte);
-	}
-
-	return(pa);
-}
-
diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c
deleted file mode 100644
index 0c1dc155996a..000000000000
--- a/arch/ppc/mm/ppc_mmu.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * This file contains the routines for handling the MMU on those
- * PowerPC implementations where the MMU substantially follows the
- * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * and 8260 implementations but excludes the 8xx and 4xx.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-#include <asm/prom.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-
-#include "mmu_decl.h"
-#include "mem_pieces.h"
-
-PTE *Hash, *Hash_end;
-unsigned long Hash_size, Hash_mask;
-unsigned long _SDR1;
-
-union ubat {			/* BAT register values to be loaded */
-	BAT	bat;
-	u32	word[2];
-} BATS[4][2];			/* 4 pairs of IBAT, DBAT */
-
-struct batrange {		/* stores address ranges mapped by BATs */
-	unsigned long start;
-	unsigned long limit;
-	unsigned long phys;
-} bat_addrs[4];
-
-/*
- * Return PA for this VA if it is mapped by a BAT, or 0
- */
-unsigned long v_mapped_by_bats(unsigned long va)
-{
-	int b;
-	for (b = 0; b < 4; ++b)
-		if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
-			return bat_addrs[b].phys + (va - bat_addrs[b].start);
-	return 0;
-}
-
-/*
- * Return VA for a given PA or 0 if not mapped
- */
-unsigned long p_mapped_by_bats(unsigned long pa)
-{
-	int b;
-	for (b = 0; b < 4; ++b)
-		if (pa >= bat_addrs[b].phys
-	    	    && pa < (bat_addrs[b].limit-bat_addrs[b].start)
-		              +bat_addrs[b].phys)
-			return bat_addrs[b].start+(pa-bat_addrs[b].phys);
-	return 0;
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long tot, bl, done;
-	unsigned long max_size = (256<<20);
-	unsigned long align;
-
-	if (__map_without_bats)
-		return 0;
-
-	/* Set up BAT2 and if necessary BAT3 to cover RAM. */
-
-	/* Make sure we don't map a block larger than the
-	   smallest alignment of the physical address. */
-	/* alignment of PPC_MEMSTART */
-	align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
-	/* set BAT block size to MIN(max_size, align) */
-	if (align && align < max_size)
-		max_size = align;
-
-	tot = total_lowmem;
-	for (bl = 128<<10; bl < max_size; bl <<= 1) {
-		if (bl * 2 > tot)
-			break;
-	}
-
-	setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
-	done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
-	if ((done < tot) && !bat_addrs[3].limit) {
-		/* use BAT3 to cover a bit more */
-		tot -= done;
-		for (bl = 128<<10; bl < max_size; bl <<= 1)
-			if (bl * 2 > tot)
-				break;
-		setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
-		done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
-	}
-
-	return done;
-}
-
-/*
- * Set up one of the I/D BAT (block address translation) register pairs.
- * The parameters are not checked; in particular size must be a power
- * of 2 between 128k and 256M.
- */
-void __init setbat(int index, unsigned long virt, unsigned long phys,
-		   unsigned int size, int flags)
-{
-	unsigned int bl;
-	int wimgxpp;
-	union ubat *bat = BATS[index];
-
-	if (((flags & _PAGE_NO_CACHE) == 0) &&
-	    cpu_has_feature(CPU_FTR_NEED_COHERENT))
-		flags |= _PAGE_COHERENT;
-
-	bl = (size >> 17) - 1;
-	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
-		/* 603, 604, etc. */
-		/* Do DBAT first */
-		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
-				   | _PAGE_COHERENT | _PAGE_GUARDED);
-		wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
-		bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
-		bat[1].word[1] = phys | wimgxpp;
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
-		if (flags & _PAGE_USER)
-#endif
-			bat[1].bat.batu.vp = 1;
-		if (flags & _PAGE_GUARDED) {
-			/* G bit must be zero in IBATs */
-			bat[0].word[0] = bat[0].word[1] = 0;
-		} else {
-			/* make IBAT same as DBAT */
-			bat[0] = bat[1];
-		}
-	} else {
-		/* 601 cpu */
-		if (bl > BL_8M)
-			bl = BL_8M;
-		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
-				   | _PAGE_COHERENT);
-		wimgxpp |= (flags & _PAGE_RW)?
-			((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX;
-		bat->word[0] = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
-		bat->word[1] = phys | bl | 0x40;	/* V=1 */
-	}
-
-	bat_addrs[index].start = virt;
-	bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1;
-	bat_addrs[index].phys = phys;
-}
-
-/*
- * Initialize the hash table and patch the instructions in hashtable.S.
- */
-void __init MMU_init_hw(void)
-{
-	unsigned int hmask, mb, mb2;
-	unsigned int n_hpteg, lg_n_hpteg;
-
-	extern unsigned int hash_page_patch_A[];
-	extern unsigned int hash_page_patch_B[], hash_page_patch_C[];
-	extern unsigned int hash_page[];
-	extern unsigned int flush_hash_patch_A[], flush_hash_patch_B[];
-
-	if (!cpu_has_feature(CPU_FTR_HPTE_TABLE)) {
-		/*
-		 * Put a blr (procedure return) instruction at the
-		 * start of hash_page, since we can still get DSI
-		 * exceptions on a 603.
-		 */
-		hash_page[0] = 0x4e800020;
-		flush_icache_range((unsigned long) &hash_page[0],
-				   (unsigned long) &hash_page[1]);
-		return;
-	}
-
-	if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
-
-#define LG_HPTEG_SIZE	6		/* 64 bytes per HPTEG */
-#define SDR1_LOW_BITS	((n_hpteg - 1) >> 10)
-#define MIN_N_HPTEG	1024		/* min 64kB hash table */
-
-	/*
-	 * Allow 1 HPTE (1/8 HPTEG) for each page of memory.
-	 * This is less than the recommended amount, but then
-	 * Linux ain't AIX.
-	 */
-	n_hpteg = total_memory / (PAGE_SIZE * 8);
-	if (n_hpteg < MIN_N_HPTEG)
-		n_hpteg = MIN_N_HPTEG;
-	lg_n_hpteg = __ilog2(n_hpteg);
-	if (n_hpteg & (n_hpteg - 1)) {
-		++lg_n_hpteg;		/* round up if not power of 2 */
-		n_hpteg = 1 << lg_n_hpteg;
-	}
-	Hash_size = n_hpteg << LG_HPTEG_SIZE;
-
-	/*
-	 * Find some memory for the hash table.
-	 */
-	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-	Hash = mem_pieces_find(Hash_size, Hash_size);
-	cacheable_memzero(Hash, Hash_size);
-	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
-
-	Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
-
-	printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
-	       total_memory >> 20, Hash_size >> 10, Hash);
-
-
-	/*
-	 * Patch up the instructions in hashtable.S:create_hpte
-	 */
-	if ( ppc_md.progress ) ppc_md.progress("hash:patch", 0x345);
-	Hash_mask = n_hpteg - 1;
-	hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
-	mb2 = mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
-	if (lg_n_hpteg > 16)
-		mb2 = 16 - LG_HPTEG_SIZE;
-
-	hash_page_patch_A[0] = (hash_page_patch_A[0] & ~0xffff)
-		| ((unsigned int)(Hash) >> 16);
-	hash_page_patch_A[1] = (hash_page_patch_A[1] & ~0x7c0) | (mb << 6);
-	hash_page_patch_A[2] = (hash_page_patch_A[2] & ~0x7c0) | (mb2 << 6);
-	hash_page_patch_B[0] = (hash_page_patch_B[0] & ~0xffff) | hmask;
-	hash_page_patch_C[0] = (hash_page_patch_C[0] & ~0xffff) | hmask;
-
-	/*
-	 * Ensure that the locations we've patched have been written
-	 * out from the data cache and invalidated in the instruction
-	 * cache, on those machines with split caches.
-	 */
-	flush_icache_range((unsigned long) &hash_page_patch_A[0],
-			   (unsigned long) &hash_page_patch_C[1]);
-
-	/*
-	 * Patch up the instructions in hashtable.S:flush_hash_page
-	 */
-	flush_hash_patch_A[0] = (flush_hash_patch_A[0] & ~0xffff)
-		| ((unsigned int)(Hash) >> 16);
-	flush_hash_patch_A[1] = (flush_hash_patch_A[1] & ~0x7c0) | (mb << 6);
-	flush_hash_patch_A[2] = (flush_hash_patch_A[2] & ~0x7c0) | (mb2 << 6);
-	flush_hash_patch_B[0] = (flush_hash_patch_B[0] & ~0xffff) | hmask;
-	flush_icache_range((unsigned long) &flush_hash_patch_A[0],
-			   (unsigned long) &flush_hash_patch_B[1]);
-
-	if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205);
-}
diff --git a/arch/ppc/mm/tlb.c b/arch/ppc/mm/tlb.c
deleted file mode 100644
index 4ff260bc9dd1..000000000000
--- a/arch/ppc/mm/tlb.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * This file contains the routines for TLB flushing.
- * On machines where the MMU uses a hash table to store virtual to
- * physical translations, these routines flush entries from the
- * hash table also.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <asm/tlbflush.h>
-#include <asm/tlb.h>
-
-#include "mmu_decl.h"
-
-/*
- * Called when unmapping pages to flush entries from the TLB/hash table.
- */
-void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr)
-{
-	unsigned long ptephys;
-
-	if (Hash != 0) {
-		ptephys = __pa(ptep) & PAGE_MASK;
-		flush_hash_pages(mm->context.id, addr, ptephys, 1);
-	}
-}
-
-/*
- * Called by ptep_set_access_flags, must flush on CPUs for which the
- * DSI handler can't just "fixup" the TLB on a write fault
- */
-void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr)
-{
-	if (Hash != 0)
-		return;
-	_tlbie(addr);
-}
-
-/*
- * Called at the end of a mmu_gather operation to make sure the
- * TLB flush is completely done.
- */
-void tlb_flush(struct mmu_gather *tlb)
-{
-	if (Hash == 0) {
-		/*
-		 * 603 needs to flush the whole TLB here since
-		 * it doesn't use a hash table.
-		 */
-		_tlbia();
-	}
-}
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes kernel pages
- *
- * since the hardware hash table functions as an extension of the
- * tlb as far as the linux tables are concerned, flush it too.
- *    -- Cort
- */
-
-/*
- * 750 SMP is a Bad Idea because the 750 doesn't broadcast all
- * the cache operations on the bus.  Hence we need to use an IPI
- * to get the other CPU(s) to invalidate their TLBs.
- */
-#ifdef CONFIG_SMP_750
-#define FINISH_FLUSH	smp_send_tlb_invalidate(0)
-#else
-#define FINISH_FLUSH	do { } while (0)
-#endif
-
-static void flush_range(struct mm_struct *mm, unsigned long start,
-			unsigned long end)
-{
-	pmd_t *pmd;
-	unsigned long pmd_end;
-	int count;
-	unsigned int ctx = mm->context.id;
-
-	if (Hash == 0) {
-		_tlbia();
-		return;
-	}
-	start &= PAGE_MASK;
-	if (start >= end)
-		return;
-	end = (end - 1) | ~PAGE_MASK;
-	pmd = pmd_offset(pgd_offset(mm, start), start);
-	for (;;) {
-		pmd_end = ((start + PGDIR_SIZE) & PGDIR_MASK) - 1;
-		if (pmd_end > end)
-			pmd_end = end;
-		if (!pmd_none(*pmd)) {
-			count = ((pmd_end - start) >> PAGE_SHIFT) + 1;
-			flush_hash_pages(ctx, start, pmd_val(*pmd), count);
-		}
-		if (pmd_end == end)
-			break;
-		start = pmd_end + 1;
-		++pmd;
-	}
-}
-
-/*
- * Flush kernel TLB entries in the given range
- */
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	flush_range(&init_mm, start, end);
-	FINISH_FLUSH;
-}
-
-/*
- * Flush all the (user) entries for the address space described by mm.
- */
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	struct vm_area_struct *mp;
-
-	if (Hash == 0) {
-		_tlbia();
-		return;
-	}
-
-	for (mp = mm->mmap; mp != NULL; mp = mp->vm_next)
-		flush_range(mp->vm_mm, mp->vm_start, mp->vm_end);
-	FINISH_FLUSH;
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
-{
-	struct mm_struct *mm;
-	pmd_t *pmd;
-
-	if (Hash == 0) {
-		_tlbie(vmaddr);
-		return;
-	}
-	mm = (vmaddr < TASK_SIZE)? vma->vm_mm: &init_mm;
-	pmd = pmd_offset(pgd_offset(mm, vmaddr), vmaddr);
-	if (!pmd_none(*pmd))
-		flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1);
-	FINISH_FLUSH;
-}
-
-/*
- * For each address in the range, find the pte for the address
- * and check _PAGE_HASHPTE bit; if it is set, find and destroy
- * the corresponding HPTE.
- */
-void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-		     unsigned long end)
-{
-	flush_range(vma->vm_mm, start, end);
-	FINISH_FLUSH;
-}
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
deleted file mode 100644
index 76551b679030..000000000000
--- a/arch/ppc/platforms/4xx/Kconfig
+++ /dev/null
@@ -1,285 +0,0 @@
-config 4xx
-	bool
-	depends on 40x || 44x
-	default y
-
-config WANT_EARLY_SERIAL
-	bool
-	select SERIAL_8250
-	default n
-
-menu "IBM 4xx options"
-	depends on 4xx
-
-choice
-	prompt "Machine Type"
-	depends on 40x
-	default WALNUT
-
-config BUBINGA
-	bool "Bubinga"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM 405EP evaluation board.
-
-config CPCI405
-	bool "CPCI405"
-	help
-	  This option enables support for the CPCI405 board.
-
-config EP405
-	bool "EP405/EP405PC"
-	select EMBEDDEDBOOT
-	help
-	  This option enables support for the EP405/EP405PC boards.
-
-config REDWOOD_5
-	bool "Redwood-5"
-	help
-	  This option enables support for the IBM STB04 evaluation board.
-
-config REDWOOD_6
-	bool "Redwood-6"
-	help
-	  This option enables support for the IBM STBx25xx evaluation board.
-
-config SYCAMORE
-	bool "Sycamore"
-	help
-	  This option enables support for the IBM PPC405GPr evaluation board.
-
-config WALNUT
-	bool "Walnut"
-	help
-	  This option enables support for the IBM PPC405GP evaluation board.
-
-config XILINX_ML300
-	bool "Xilinx-ML300"
-	select XILINX_VIRTEX_II_PRO
-	select EMBEDDEDBOOT
-	help
-	  This option enables support for the Xilinx ML300 evaluation board.
-
-config XILINX_ML403
-	bool "Xilinx-ML403"
-	select XILINX_VIRTEX_4_FX
-	select EMBEDDEDBOOT
-	help
-	  This option enables support for the Xilinx ML403 evaluation board.
-endchoice
-
-choice
-	prompt "Machine Type"
-	depends on 44x
-	default EBONY
-
-config BAMBOO
-	bool "Bamboo"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440EP evaluation board.
-
-config EBONY
-	bool "Ebony"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GP evaluation board.
-
-config LUAN
-	bool "Luan"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440SP evaluation board.
-
-config YUCCA
-	bool "Yucca"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the AMCC PPC440SPe evaluation board.
-
-config OCOTEA
-	bool "Ocotea"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GX evaluation board.
-
-config TAISHAN
-	bool "Taishan"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the AMCC PPC440GX evaluation board.
-
-endchoice
-
-config EP405PC
-	bool "EP405PC Support"
-	depends on EP405
-
-
-# It's often necessary to know the specific 4xx processor type.
-# Fortunately, it is impled (so far) from the board type, so we
-# don't need to ask more redundant questions.
-config NP405H
-	bool
-	depends on ASH
-	default y
-
-config 440EP
-	bool
-	depends on BAMBOO
-	select PPC_FPU
-	default y
-
-config 440GP
-	bool
-	depends on EBONY
-	default y
-
-config 440GX
-	bool
-	depends on OCOTEA || TAISHAN
-	default y
-
-config 440SP
-	bool
-	depends on LUAN
-	default y
-
-config 440SPE
-	bool
-	depends on YUCCA
-	default y
-
-config 440
-	bool
-	depends on 440GP || 440SP || 440SPE || 440EP
-	default y
-
-config 440A
-	bool
-	depends on 440GX
-	default y
-
-config IBM440EP_ERR42
-	bool
-	depends on 440EP
-	default y
-
-# All 405-based cores up until the 405GPR and 405EP have this errata.
-config IBM405_ERR77
-	bool
-	depends on 40x && !403GCX && !405GPR && !405EP
-	default y
-
-# All 40x-based cores, up until the 405GPR and 405EP have this errata.
-config IBM405_ERR51
-	bool
-	depends on 40x && !405GPR && !405EP
-	default y
-
-config BOOKE
-	bool
-	depends on 44x
-	default y
-
-config IBM_OCP
-	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT
-	default y
-
-config IBM_EMAC4
-	bool
-	depends on 440GX || 440SP || 440SPE
-	default y
-
-config BIOS_FIXUP
-	bool
-	depends on BUBINGA || EP405 || SYCAMORE || WALNUT || CPCI405
-	default y
-
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
-	bool
-	depends on OAK
-	default y
-
-config 405EP
-	bool
-	depends on BUBINGA
-	default y
-
-config 405GP
-	bool
-	depends on CPCI405 || EP405 || WALNUT
-	default y
-
-config 405GPR
-	bool
-	depends on SYCAMORE
-	default y
-
-config XILINX_VIRTEX_II_PRO
-	bool
-	select XILINX_VIRTEX
-
-config XILINX_VIRTEX_4_FX
-	bool
-	select XILINX_VIRTEX
-
-config XILINX_VIRTEX
-	bool
-
-config STB03xxx
-	bool
-	depends on REDWOOD_5 || REDWOOD_6
-	default y
-
-config EMBEDDEDBOOT
-	bool
-
-config IBM_OPENBIOS
-	bool
-	depends on ASH || REDWOOD_5 || REDWOOD_6
-	default y
-
-config PPC4xx_DMA
-	bool "PPC4xx DMA controller support"
-	depends on 4xx
-
-config PPC4xx_EDMA
-	bool
-	depends on !STB03xxx && PPC4xx_DMA
-	default y
-
-config PPC_GEN550
-	bool
-	depends on 4xx
-	default y
-
-choice
-	prompt "TTYS0 device and default console"
-	depends on 40x
-	default UART0_TTYS0
-
-config UART0_TTYS0
-	bool "UART0"
-
-config UART0_TTYS1
-	bool "UART1"
-
-endchoice
-
-config SERIAL_SICC
-	bool "SICC Serial port support"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-config SERIAL_SICC_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-endmenu
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
deleted file mode 100644
index 723ad7985cc6..000000000000
--- a/arch/ppc/platforms/4xx/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Makefile for the PowerPC 4xx linux kernel.
-
-obj-$(CONFIG_BAMBOO)		+= bamboo.o
-obj-$(CONFIG_CPCI405)		+= cpci405.o
-obj-$(CONFIG_EBONY)		+= ebony.o
-obj-$(CONFIG_EP405)		+= ep405.o
-obj-$(CONFIG_BUBINGA)		+= bubinga.o
-obj-$(CONFIG_LUAN)		+= luan.o
-obj-$(CONFIG_YUCCA)		+= yucca.o
-obj-$(CONFIG_OCOTEA)		+= ocotea.o
-obj-$(CONFIG_REDWOOD_5)		+= redwood5.o
-obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
-obj-$(CONFIG_SYCAMORE)		+= sycamore.o
-obj-$(CONFIG_TAISHAN)		+= taishan.o
-obj-$(CONFIG_WALNUT)		+= walnut.o
-obj-$(CONFIG_XILINX_ML300)	+= xilinx_ml300.o
-obj-$(CONFIG_XILINX_ML403)	+= xilinx_ml403.o
-
-obj-$(CONFIG_405GP)		+= ibm405gp.o
-obj-$(CONFIG_REDWOOD_5)		+= ibmstb4.o
-obj-$(CONFIG_NP405H)		+= ibmnp405h.o
-obj-$(CONFIG_REDWOOD_6)		+= ibmstbx25.o
-obj-$(CONFIG_440EP)		+= ibm440ep.o
-obj-$(CONFIG_440GP)		+= ibm440gp.o
-obj-$(CONFIG_440GX)		+= ibm440gx.o
-obj-$(CONFIG_440SP)		+= ibm440sp.o
-obj-$(CONFIG_440SPE)		+= ppc440spe.o
-obj-$(CONFIG_405EP)		+= ibm405ep.o
-obj-$(CONFIG_405GPR)		+= ibm405gpr.o
-
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
deleted file mode 100644
index 01f20f4c14fe..000000000000
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/*
- * Bamboo board specific routines
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/ethtool.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-/*
- * Bamboo external IRQ triggering/polarity settings
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
-};
-
-static void __init
-bamboo_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = BAMBOO_TMRCLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-
-}
-
-static int
-bamboo_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n");
-
-	return 0;
-}
-
-static inline int
-bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 28, 28, 28, 28 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 27, 27, 27, 27 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 26, 26, 26, 26 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 25, 25, 25, 25 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init bamboo_set_emacdata(void)
-{
-	u8 * base_addr;
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	u8 val;
-	int mode;
-	u32 excluded = 0;
-
-	base_addr = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
-	val = readb(base_addr);
-	iounmap((void *) base_addr);
-	if (BAMBOO_SEL_MII(val))
-		mode = PHY_MODE_MII;
-	else if (BAMBOO_SEL_RMII(val))
-		mode = PHY_MODE_RMII;
-	else
-		mode = PHY_MODE_SMII;
-
-	/*
-	 * SW2 on the Bamboo is used for ethernet configuration and is accessed
-	 * via the CONFIG2 register in the FPGA.  If the ANEG pin is set,
-	 * overwrite the supported features with the settings in SW2.
-	 *
-	 * This is used as a workaround for the improperly biased RJ-45 sockets
-	 * on the Rev. 0 Bamboo.  By default only 10baseT is functional.
-	 * Removing inductors L17 and L18 from the board allows 100baseT, but
-	 * disables 10baseT.  The Rev. 1 has no such limitations.
-	 */
-
-	base_addr = ioremap64(BAMBOO_FPGA_CONFIG2_REG_ADDR, 8);
-	val = readb(base_addr);
-	iounmap((void *) base_addr);
-	if (!BAMBOO_AUTONEGOTIATE(val)) {
-		excluded |= SUPPORTED_Autoneg;
-		if (BAMBOO_FORCE_100Mbps(val)) {
-			excluded |= SUPPORTED_10baseT_Full;
-			excluded |= SUPPORTED_10baseT_Half;
-			if (BAMBOO_FULL_DUPLEX_EN(val))
-				excluded |= SUPPORTED_100baseT_Half;
-			else
-				excluded |= SUPPORTED_100baseT_Full;
-		} else {
-			excluded |= SUPPORTED_100baseT_Full;
-			excluded |= SUPPORTED_100baseT_Half;
-			if (BAMBOO_FULL_DUPLEX_EN(val))
-				excluded |= SUPPORTED_10baseT_Half;
-			else
-				excluded |= SUPPORTED_10baseT_Full;
-		}
-	}
-
-	/* Set mac_addr, phy mode and unsupported phy features for each EMAC */
-
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-	emacdata->phy_mode = mode;
-	emacdata->phy_feat_exc = excluded;
-
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
-	emacdata = def->additions;
-	memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-	emacdata->phy_mode = mode;
-	emacdata->phy_feat_exc = excluded;
-}
-
-static int
-bamboo_exclude_device(unsigned char bus, unsigned char devfn)
-{
-	return (bus == 0 && devfn == 0);
-}
-
-#define PCI_READW(offset) \
-        (readw((void *)((u32)pci_reg_base+offset)))
-
-#define PCI_WRITEW(value, offset) \
-	(writew(value, (void *)((u32)pci_reg_base+offset)))
-
-#define PCI_WRITEL(value, offset) \
-	(writel(value, (void *)((u32)pci_reg_base+offset)))
-
-static void __init
-bamboo_setup_pci(void)
-{
-	void *pci_reg_base;
-	unsigned long memory_size;
-	memory_size = ppc_md.find_end_of_memory();
-
-	pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE);
-
-	/* Enable PCI I/O, Mem, and Busmaster cycles */
-	PCI_WRITEW(PCI_READW(PCI_COMMAND) |
-		   PCI_COMMAND_MEMORY |
-		   PCI_COMMAND_MASTER, PCI_COMMAND);
-
-	/* Disable region first */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA);
-
-	/* PLB starting addr: 0x00000000A0000000 */
-	PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA);
-
-	/* PCI start addr, 0xA0000000 (PCI Address) */
-	PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA);
-
-	/* Enable no pre-fetch, enable region */
-	PCI_WRITEL(((0xffffffff -
-		     (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01),
-		      BAMBOO_PCIL0_PMM0MA);
-
-	/* Disable region one */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
-
-	/* Disable region two */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
-
-	/* Now configure the PCI->PLB windows, we only use PTM1
-	 *
-	 * For Inbound flow, set the window size to all available memory
-	 * This is required because if size is smaller,
-	 * then Eth/PCI DD would fail as PCI card not able to access
-	 * the memory allocated by DD.
-	 */
-
-	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS);	/* disabled region 1 */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA);	/* begin of address map */
-
-	memory_size = 1 << fls(memory_size - 1);
-
-	/* Size low + Enabled */
-	PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS);
-
-	eieio();
-	iounmap(pci_reg_base);
-}
-
-static void __init
-bamboo_setup_hose(void)
-{
-	unsigned int bar_response, bar;
-	struct pci_controller *hose;
-
-	bamboo_setup_pci();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			BAMBOO_PCI_LOWER_IO,
-			BAMBOO_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			BAMBOO_PCI_LOWER_MEM,
-			BAMBOO_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	ppc_md.pci_exclude_device = bamboo_exclude_device;
-
-	hose->io_space.start = BAMBOO_PCI_LOWER_IO;
-	hose->io_space.end = BAMBOO_PCI_UPPER_IO;
-	hose->mem_space.start = BAMBOO_PCI_LOWER_MEM;
-	hose->mem_space.end = BAMBOO_PCI_UPPER_MEM;
-	isa_io_base =
-		(unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE);
-	hose->io_base_virt = (void *)isa_io_base;
-
-	setup_indirect_pci(hose,
-			BAMBOO_PCI_CFGA_PLB32,
-			BAMBOO_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-	}
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = bamboo_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-bamboo_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440EP_UART0_ADDR, 8);
-	port.irq = 0;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-#endif
-
-	port.membase = ioremap64(PPC440EP_UART1_ADDR, 8);
-	port.irq = 1;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-
-	port.membase = ioremap64(PPC440EP_UART2_ADDR, 8);
-	port.irq = 3;
-	port.uartclk = clocks.uart2;
-	port.line = 2;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 2 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(2, &port);
-#endif
-
-	port.membase = ioremap64(PPC440EP_UART3_ADDR, 8);
-	port.irq = 4;
-	port.uartclk = clocks.uart3;
-	port.line = 3;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 3 failed\n");
-	}
-}
-
-static void __init
-bamboo_setup_arch(void)
-{
-
-	bamboo_set_emacdata();
-
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	bamboo_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	bamboo_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = bamboo_setup_arch;
-	ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = bamboo_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = bamboo_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h
deleted file mode 100644
index dcd3d09a0a71..000000000000
--- a/arch/ppc/platforms/4xx/bamboo.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Bamboo board definitions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- *
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_BAMBOO_H__
-#define __ASM_BAMBOO_H__
-
-#include <platforms/4xx/ibm440ep.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0		0x0EF600E00
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE			0xfff00000
-#define PIBS_MAC_BASE			(PIBS_FLASH_BASE+0xc0400)
-#define PIBS_MAC_SIZE			0x200
-#define PIBS_MAC_OFFSET			0x100
-
-/* Default clock rate */
-#define BAMBOO_TMRCLK			25000000
-
-/* RTC/NVRAM location */
-#define BAMBOO_RTC_ADDR			0x080000000ULL
-#define BAMBOO_RTC_SIZE			0x2000
-
-/* FPGA Registers */
-#define BAMBOO_FPGA_ADDR		0x080002000ULL
-
-#define BAMBOO_FPGA_CONFIG2_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x1)
-#define BAMBOO_FULL_DUPLEX_EN(x)	(x & 0x08)
-#define BAMBOO_FORCE_100Mbps(x)		(x & 0x04)
-#define BAMBOO_AUTONEGOTIATE(x)		(x & 0x02)
-
-#define BAMBOO_FPGA_SETTING_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x3)
-#define BAMBOO_BOOT_SMALL_FLASH(x)	(!(x & 0x80))
-#define BAMBOO_LARGE_FLASH_EN(x)	(!(x & 0x40))
-#define BAMBOO_BOOT_NAND_FLASH(x)	(!(x & 0x20))
-
-#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4)
-#define BAMBOO_SEL_MII(x)		(x & 0x80)
-#define BAMBOO_SEL_RMII(x)		(x & 0x40)
-#define BAMBOO_SEL_SMII(x)		(x & 0x20)
-
-/* Flash */
-#define BAMBOO_SMALL_FLASH_LOW		0x087f00000ULL
-#define BAMBOO_SMALL_FLASH_HIGH		0x0fff00000ULL
-#define BAMBOO_SMALL_FLASH_SIZE		0x100000
-#define BAMBOO_LARGE_FLASH_LOW		0x087800000ULL
-#define BAMBOO_LARGE_FLASH_HIGH1	0x0ff800000ULL
-#define BAMBOO_LARGE_FLASH_HIGH2	0x0ffc00000ULL
-#define BAMBOO_LARGE_FLASH_SIZE		0x400000
-#define BAMBOO_SRAM_LOW			0x087f00000ULL
-#define BAMBOO_SRAM_HIGH1		0x0fff00000ULL
-#define BAMBOO_SRAM_HIGH2		0x0ff800000ULL
-#define BAMBOO_SRAM_SIZE		0x100000
-#define BAMBOO_NAND_FLASH_REG_ADDR	0x090000000ULL
-#define BAMBOO_NAND_FLASH_REG_SIZE	0x2000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE			4
-
-#define UART0_IO_BASE			0xEF600300
-#define UART1_IO_BASE			0xEF600400
-#define UART2_IO_BASE			0xEF600500
-#define UART3_IO_BASE			0xEF600600
-
-#define BASE_BAUD			33177600/3/16
-#define UART0_INT			0
-#define UART1_INT			1
-#define UART2_INT			3
-#define UART3_INT			4
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)		\
-	STD_UART_OP(3)
-
-/* PCI support */
-#define BAMBOO_PCI_CFGA_PLB32		0xeec00000
-#define BAMBOO_PCI_CFGD_PLB32		0xeec00004
-
-#define BAMBOO_PCI_IO_BASE		0x00000000e8000000ULL
-#define BAMBOO_PCI_IO_SIZE		0x00010000
-#define BAMBOO_PCI_MEM_OFFSET		0x00000000
-#define BAMBOO_PCI_PHY_MEM_BASE		0x00000000a0000000ULL
-
-#define BAMBOO_PCI_LOWER_IO		0x00000000
-#define BAMBOO_PCI_UPPER_IO		0x0000ffff
-#define BAMBOO_PCI_LOWER_MEM		0xa0000000
-#define BAMBOO_PCI_UPPER_MEM		0xafffffff
-#define BAMBOO_PCI_MEM_BASE		0xa0000000
-
-#define BAMBOO_PCIL0_BASE		0x00000000ef400000ULL
-#define BAMBOO_PCIL0_SIZE		0x40
-
-#define BAMBOO_PCIL0_PMM0LA		0x000
-#define BAMBOO_PCIL0_PMM0MA		0x004
-#define BAMBOO_PCIL0_PMM0PCILA		0x008
-#define BAMBOO_PCIL0_PMM0PCIHA		0x00C
-#define BAMBOO_PCIL0_PMM1LA		0x010
-#define BAMBOO_PCIL0_PMM1MA		0x014
-#define BAMBOO_PCIL0_PMM1PCILA		0x018
-#define BAMBOO_PCIL0_PMM1PCIHA		0x01C
-#define BAMBOO_PCIL0_PMM2LA		0x020
-#define BAMBOO_PCIL0_PMM2MA		0x024
-#define BAMBOO_PCIL0_PMM2PCILA		0x028
-#define BAMBOO_PCIL0_PMM2PCIHA		0x02C
-#define BAMBOO_PCIL0_PTM1MS		0x030
-#define BAMBOO_PCIL0_PTM1LA		0x034
-#define BAMBOO_PCIL0_PTM2MS		0x038
-#define BAMBOO_PCIL0_PTM2LA		0x03C
-
-#endif                          /* __ASM_BAMBOO_H__ */
-#endif                          /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
deleted file mode 100644
index cd696be55aca..000000000000
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * Support for IBM PPC 405EP evaluation board (Bubinga).
- *
- * Author: SAW (IBM), derived from walnut.c.
- *         Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/blkdev.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/processor.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/kgdb.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-
-#include <platforms/4xx/ibm405ep.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-extern bd_t __res;
-
-void *bubinga_rtc_base;
-
-/* Some IRQs unique to the board
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *      A       B       C       D
-	     */
-	{
-		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-/* The serial clock for the chip is an internal clock determined by
- * different clock speeds/dividers.
- * Calculate the proper input baud rate and setup the serial driver.
- */
-static void __init
-bubinga_early_serial_map(void)
-{
-	u32 uart_div;
-	int uart_clock;
-	struct uart_port port;
-
-         /* Calculate the serial clock input frequency
-          *
-          * The base baud is the PLL OUTA (provided in the board info
-          * structure) divided by the external UART Divisor, divided
-          * by 16.
-          */
-	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
-	uart_clock = __res.bi_procfreq / uart_div;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = (void*)ACTING_UART0_IO_BASE;
-	port.irq = ACTING_UART0_INT;
-	port.uartclk = uart_clock;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-	port.membase = (void*)ACTING_UART1_IO_BASE;
-	port.irq = ACTING_UART1_INT;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 * The following code is simplified by assuming that the bootrom
-	 * has been well behaved in following this mapping.
-	 */
-
-#ifdef DEBUG
-	int i;
-
-	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-	printk("PCI bridge regs before fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
-	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-	out_le32((void *) &(pcip->ptm2la), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end workaround */
-
-#ifdef DEBUG
-	printk("PCI bridge regs after fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-}
-
-void __init
-bubinga_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 1);
-
-        bubinga_early_serial_map();
-
-        /* RTC step for the evb405ep */
-        bubinga_rtc_base = (void *) BUBINGA_RTC_VADDR;
-        TODC_INIT(TODC_TYPE_DS1743, bubinga_rtc_base, bubinga_rtc_base,
-                  bubinga_rtc_base, 8);
-        /* Identify the system */
-        printk("IBM Bubinga port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-void __init
-bubinga_map_io(void)
-{
-	ppc4xx_map_io();
-     	io_block_mapping(BUBINGA_RTC_VADDR,
-                         BUBINGA_RTC_PADDR, BUBINGA_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = bubinga_setup_arch;
-	ppc_md.setup_io_mappings = bubinga_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = bubinga_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h
deleted file mode 100644
index 5c408060eb35..000000000000
--- a/arch/ppc/platforms/4xx/bubinga.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Bubinga board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- *	SAW (IBM)
- *	2003 (c) MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __BUBINGA_H__
-#define __BUBINGA_H__
-
-#include <platforms/4xx/ibm405ep.h>
-#include <asm/ppcboot.h>
-
-/* Memory map for the Bubinga board.
- * Generic 4xx plus RTC.
- */
-
-#define BUBINGA_RTC_PADDR	((uint)0xf0000000)
-#define BUBINGA_RTC_VADDR	BUBINGA_RTC_PADDR
-#define BUBINGA_RTC_SIZE	((uint)8*1024)
-
-/* The UART clock is based off an internal clock -
- * define BASE_BAUD based on the internal clock and divider(s).
- * Since BASE_BAUD must be a constant, we will initialize it
- * using clock/divider values which OpenBIOS initializes
- * for typical configurations at various CPU speeds.
- * The base baud is calculated as (FWDA / EXT UART DIV / 16)
- */
-#define BASE_BAUD		0
-
-/* Flash */
-#define PPC40x_FPGA_BASE	0xF0300000
-#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
-#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-#define PPC40x_FLASH_LOW	0xFFF00000
-#define PPC40x_FLASH_HIGH	0xFFF80000
-#define PPC40x_FLASH_SIZE	0x80000
-
-#define PPC4xx_MACHINE_NAME	"IBM Bubinga"
-
-#endif /* __BUBINGA_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/cpci405.c b/arch/ppc/platforms/4xx/cpci405.c
deleted file mode 100644
index 2e7e25dd84cb..000000000000
--- a/arch/ppc/platforms/4xx/cpci405.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Board setup routines for the esd CPCI-405 cPCI Board.
- *
- * Copyright 2001-2006 esd electronic system design - hannover germany
- *
- * Authors: Matthias Fuchs
- *          matthias.fuchs@esd-electronics.com
- *          Stefan Roese
- *          stefan.roese@esd-electronics.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-#include <platforms/4xx/ibm405gp.h>
-
-#ifdef CONFIG_GEN_RTC
-void *cpci405_nvram;
-#endif
-
-extern bd_t __res;
-
-/*
- * Some IRQs unique to CPCI-405.
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{28,	29,	30,	27},	/* IDSEL 15 - cPCI slot 8 */
-		{29,	30,	27,	28},	/* IDSEL 16 - cPCI slot 7 */
-		{30,	27,	28,	29},	/* IDSEL 17 - cPCI slot 6 */
-		{27,	28,	29,	30},	/* IDSEL 18 - cPCI slot 5 */
-		{28,	29,	30,	27},	/* IDSEL 19 - cPCI slot 4 */
-		{29,	30,	27,	28},	/* IDSEL 20 - cPCI slot 3 */
-		{30,	27,	28,	29},	/* IDSEL 21 - cPCI slot 2 */
-        };
-	const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-/* The serial clock for the chip is an internal clock determined by
- * different clock speeds/dividers.
- * Calculate the proper input baud rate and setup the serial driver.
- */
-static void __init
-cpci405_early_serial_map(void)
-{
-	u32 uart_div;
-	int uart_clock;
-	struct uart_port port;
-
-         /* Calculate the serial clock input frequency
-          *
-          * The uart clock is the cpu frequency (provided in the board info
-          * structure) divided by the external UART Divisor.
-          */
-	uart_div = ((mfdcr(DCRN_CHCR_BASE) & CHR0_UDIV) >> 1) + 1;
-	uart_clock = __res.bi_procfreq / uart_div;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-#if defined(CONFIG_UART0_TTYS0)
-	port.membase = (void*)UART0_IO_BASE;
-	port.irq = UART0_INT;
-#else
-	port.membase = (void*)UART1_IO_BASE;
-	port.irq = UART1_INT;
-#endif
-	port.uartclk = uart_clock;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-#if defined(CONFIG_UART0_TTYS0)
-	port.membase = (void*)UART1_IO_BASE;
-	port.irq = UART1_INT;
-#else
-	port.membase = (void*)UART0_IO_BASE;
-	port.irq = UART0_INT;
-#endif
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-}
-
-void __init
-cpci405_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-        cpci405_early_serial_map();
-
-#ifdef CONFIG_GEN_RTC
-	TODC_INIT(TODC_TYPE_MK48T35,
-		  cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
-#endif
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-	out_le32((void *) &(pcip->ptm2la), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-	}
-#endif
-}
-
-void __init
-cpci405_map_io(void)
-{
-	ppc4xx_map_io();
-
-#ifdef CONFIG_GEN_RTC
-	cpci405_nvram = ioremap(CPCI405_NVRAM_PADDR, CPCI405_NVRAM_SIZE);
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = cpci405_setup_arch;
-	ppc_md.setup_io_mappings = cpci405_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/cpci405.h b/arch/ppc/platforms/4xx/cpci405.h
deleted file mode 100644
index a6c0a138b0d7..000000000000
--- a/arch/ppc/platforms/4xx/cpci405.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * CPCI-405 board specific definitions
- *
- * Copyright 2001-2006 esd electronic system design - hannover germany
- *
- * Authors: Matthias Fuchs
- *          matthias.fuchs@esd-electronics.com
- *          Stefan Roese
- *          stefan.roese@esd-electronics.com
- */
-
-#ifdef __KERNEL__
-#ifndef __CPCI405_H__
-#define __CPCI405_H__
-
-#include <platforms/4xx/ibm405gp.h>
-#include <asm/ppcboot.h>
-
-/* Map for the NVRAM space */
-#define CPCI405_NVRAM_PADDR	((uint)0xf0200000)
-#define CPCI405_NVRAM_SIZE	((uint)32*1024)
-
-#define BASE_BAUD		0
-
-#define PPC4xx_MACHINE_NAME     "esd CPCI-405"
-
-#endif	/* __CPCI405_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
deleted file mode 100644
index 8027a36fc5bb..000000000000
--- a/arch/ppc/platforms/4xx/ebony.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * Ebony board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003-2005 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-#include <asm/tlbflush.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gp_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-/*
- * Ebony external IRQ triggering/polarity settings
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ0: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ1: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ2: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ3: PCI slot 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ4: IRDA */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE),	/* IRQ5: SMI pushbutton */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ6: PHYs */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ7: AUX */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ8: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ9: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ10: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ11: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ12: EXT */
-};
-
-static void __init
-ebony_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	/*
-	 * Determine system clock speed
-	 *
-	 * If we are on Rev. B silicon, then use
-	 * default external system clock.  If we are
-	 * on Rev. C silicon then errata forces us to
-	 * use the internal clock.
-	 */
-	if (strcmp(cur_cpu_spec->cpu_name, "440GP Rev. B") == 0)
-		freq = EBONY_440GP_RB_SYSCLK;
-	else
-		freq = EBONY_440GP_RC_SYSCLK;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-ebony_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: Ebony\n");
-
-	return 0;
-}
-
-static inline int
-ebony_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 23, 23, 23 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 24, 24, 24 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 25, 25, 25, 25 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 26, 26, 26, 26 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base + offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-ebony_setup_pcix(void)
-{
-	void __iomem *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-
-	eieio();
-}
-
-static void __init
-ebony_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	ebony_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = EBONY_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			EBONY_PCI_LOWER_IO,
-			EBONY_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			EBONY_PCI_LOWER_MEM,
-			EBONY_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = EBONY_PCI_LOWER_IO;
-	hose->io_space.end = EBONY_PCI_UPPER_IO;
-	hose->mem_space.start = EBONY_PCI_LOWER_MEM;
-	hose->mem_space.end = EBONY_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(EBONY_PCI_IO_BASE, EBONY_PCI_IO_SIZE);
-	isa_io_base = (unsigned long)hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			EBONY_PCI_CFGA_PLB32,
-			EBONY_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ebony_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-ebony_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GP_UART0_ADDR, 8);
-	port.irq = 0;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
-	port.irq = 1;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-ebony_setup_arch(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-
-	/* Set mac_addr for each EMAC */
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_RMII;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_RMII;
-	memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gp_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(EBONY_RTC_ADDR, EBONY_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	ebony_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	ebony_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Ebony port (MontaVista Software, Inc. (source@mvista.com))\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ebony_setup_arch;
-	ppc_md.show_cpuinfo = ebony_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = ebony_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = ebony_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
deleted file mode 100644
index f40e33d39d76..000000000000
--- a/arch/ppc/platforms/4xx/ebony.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Ebony board definitions
- *
- * Matt Porter <mporter@mvista.com>
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_EBONY_H__
-#define __ASM_EBONY_H__
-
-#include <platforms/4xx/ibm440gp.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xE0000800
-
-/* Where to find the MAC info */
-#define OPENBIOS_MAC_BASE	0xfffffe0c
-#define OPENBIOS_MAC_OFFSET	0x0c
-
-/* Default clock rates for Rev. B and Rev. C silicon */
-#define EBONY_440GP_RB_SYSCLK	33000000
-#define EBONY_440GP_RC_SYSCLK	400000000
-
-/* RTC/NVRAM location */
-#define EBONY_RTC_ADDR		0x0000000148000000ULL
-#define EBONY_RTC_SIZE		0x2000
-
-/* Flash */
-#define EBONY_FPGA_ADDR		0x0000000148300000ULL
-#define EBONY_BOOT_SMALL_FLASH(x)	(x & 0x20)
-#define EBONY_ONBRD_FLASH_EN(x)		(x & 0x02)
-#define EBONY_FLASH_SEL(x)		(x & 0x01)
-#define EBONY_SMALL_FLASH_LOW1	0x00000001ff800000ULL
-#define EBONY_SMALL_FLASH_LOW2	0x00000001ff880000ULL
-#define EBONY_SMALL_FLASH_HIGH1	0x00000001fff00000ULL
-#define EBONY_SMALL_FLASH_HIGH2	0x00000001fff80000ULL
-#define EBONY_SMALL_FLASH_SIZE	0x80000
-#define EBONY_LARGE_FLASH_LOW	0x00000001ff800000ULL
-#define EBONY_LARGE_FLASH_HIGH	0x00000001ffc00000ULL
-#define EBONY_LARGE_FLASH_SIZE	0x400000
-
-#define EBONY_SMALL_FLASH_BASE	0x00000001fff80000ULL
-#define EBONY_LARGE_FLASH_BASE	0x00000001ff800000ULL
-
-/*
- * Serial port defines
- */
-
-#if defined(__BOOTER__)
-/* OpenBIOS defined UART mappings, used by bootloader shim */
-#define UART0_IO_BASE	0xE0000200
-#define UART1_IO_BASE	0xE0000300
-#else
-/* head_44x.S created UART mapping, used before early_serial_setup.
- * We cannot use default OpenBIOS UART mappings because they
- * don't work for configurations with more than 512M RAM.    --ebs
- */
-#define UART0_IO_BASE	0xF0000200
-#define UART1_IO_BASE	0xF0000300
-#endif
-
-/* external Epson SG-615P */
-#define BASE_BAUD	691200
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* PCI support */
-#define EBONY_PCI_LOWER_IO	0x00000000
-#define EBONY_PCI_UPPER_IO	0x0000ffff
-#define EBONY_PCI_LOWER_MEM	0x80002000
-#define EBONY_PCI_UPPER_MEM	0xffffefff
-
-#define EBONY_PCI_CFGREGS_BASE	0x000000020ec00000
-#define EBONY_PCI_CFGA_PLB32	0x0ec00000
-#define EBONY_PCI_CFGD_PLB32	0x0ec00004
-
-#define EBONY_PCI_IO_BASE	0x0000000208000000ULL
-#define EBONY_PCI_IO_SIZE	0x00010000
-#define EBONY_PCI_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_EBONY_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ep405.c b/arch/ppc/platforms/4xx/ep405.c
deleted file mode 100644
index 5aa295022804..000000000000
--- a/arch/ppc/platforms/4xx/ep405.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Embedded Planet 405GP board
- * http://www.embeddedplanet.com
- *
- * Author: Matthew Locke <mlocke@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-u8 *ep405_bcsr;
-u8 *ep405_nvram;
-
-static struct {
-	u8 cpld_xirq_select;
-	int pci_idsel;
-	int irq;
-} ep405_devtable[] = {
-#ifdef CONFIG_EP405PC
-	{0x07, 0x0E, 25},		/* EP405PC: USB */
-#endif
-};
-
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int i;
-
-	/* AFAICT this is only called a few times during PCI setup, so
-	   performance is not critical */
-	for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
-		if (idsel == ep405_devtable[i].pci_idsel)
-			return ep405_devtable[i].irq;
-	}
-	return -1;
-};
-
-void __init
-ep405_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-	if (__res.bi_nvramsize == 512*1024) {
-		/* FIXME: we should properly handle NVRTCs of different sizes */
-		TODC_INIT(TODC_TYPE_DS1557, ep405_nvram, ep405_nvram, ep405_nvram, 8);
-	}
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 */
-
-	/* Disable region zero first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000000);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Configure PTM (PCI->PLB) region 1 */
-	out_le32((void *) &(pcip->ptm1la), 0x00000000); /* PLB base address */
-	/* Disable PTM region 2 */
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end workaround */
-#endif
-}
-
-void __init
-ep405_map_io(void)
-{
-	bd_t *bip = &__res;
-
-	ppc4xx_map_io();
-
-	ep405_bcsr = ioremap(EP405_BCSR_PADDR, EP405_BCSR_SIZE);
-
-	if (bip->bi_nvramsize > 0) {
-		ep405_nvram = ioremap(EP405_NVRAM_PADDR, bip->bi_nvramsize);
-	}
-}
-
-void __init
-ep405_init_IRQ(void)
-{
-	int i;
-
-	ppc4xx_init_IRQ();
-
-	/* Workaround for a bug in the firmware it incorrectly sets
-	   the IRQ polarities for XIRQ0 and XIRQ1 */
-	mtdcr(DCRN_UIC_PR(DCRN_UIC0_BASE), 0xffffff80); /* set the polarity */
-	mtdcr(DCRN_UIC_SR(DCRN_UIC0_BASE), 0x00000060); /* clear bogus interrupts */
-
-	/* Activate the XIRQs from the CPLD */
-	writeb(0xf0, ep405_bcsr+10);
-
-	/* Set up IRQ routing */
-	for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
-		if ( (ep405_devtable[i].irq >= 25)
-		     && (ep405_devtable[i].irq) <= 31) {
-			writeb(ep405_devtable[i].cpld_xirq_select, ep405_bcsr+5);
-			writeb(ep405_devtable[i].irq - 25, ep405_bcsr+6);
-		}
-	}
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ep405_setup_arch;
-	ppc_md.setup_io_mappings = ep405_map_io;
-	ppc_md.init_IRQ = ep405_init_IRQ;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-	if (__res.bi_nvramsize == 512*1024) {
-		ppc_md.time_init = todc_time_init;
-		ppc_md.set_rtc_time = todc_set_rtc_time;
-		ppc_md.get_rtc_time = todc_get_rtc_time;
-	} else {
-		printk("EP405: NVRTC size is not 512k (not a DS1557).  Not sure what to do with it\n");
-	}
-}
diff --git a/arch/ppc/platforms/4xx/ep405.h b/arch/ppc/platforms/4xx/ep405.h
deleted file mode 100644
index 9814fc431725..000000000000
--- a/arch/ppc/platforms/4xx/ep405.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Embedded Planet 405GP board
- * http://www.embeddedplanet.com
- *
- * Author: Matthew Locke <mlocke@mvista.com>
- *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_EP405_H__
-#define __ASM_EP405_H__
-
-/* We have a 405GP core */
-#include <platforms/4xx/ibm405gp.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-typedef struct board_info {
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
-	unsigned int	 bi_nvramsize;		/* Size of the NVRAM/RTC */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-extern u8 *ep405_bcsr;
-extern u8 *ep405_nvram;
-
-/* Map for the BCSR and NVRAM space */
-#define EP405_BCSR_PADDR	((uint)0xf4000000)
-#define EP405_BCSR_SIZE		((uint)16)
-#define EP405_NVRAM_PADDR	((uint)0xf4200000)
-
-/* serial defines */
-#define BASE_BAUD		399193
-
-#define PPC4xx_MACHINE_NAME "Embedded Planet 405GP"
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_EP405_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405ep.c b/arch/ppc/platforms/4xx/ibm405ep.c
deleted file mode 100644
index fb3630a1608d..000000000000
--- a/arch/ppc/platforms/4xx/ibm405ep.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Support for IBM PPC 405EP processors.
- *
- * Author: SAW (IBM), derived from ibmnp405l.c.
- *         Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-#include <platforms/4xx/ibm405ep.h>
-
-static struct ocp_func_mal_data ibm405ep_mal0_def = {
-	.num_tx_chans	= 4,		/* Number of TX channels */
-	.num_rx_chans	= 2,		/* Number of RX channels */
-	.txeob_irq	= 11,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 12,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 13,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 14,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 10,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_emac_data ibm405ep_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= 0,		/* MDIO via EMAC0 */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibm405ep_emac1_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 1,		/* MAL rx channel number */
-	.mal_tx_chan	= 2,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= 0,		/* MDIO via EMAC0 */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_iic_data ibm405ep_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm405ep_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405ep_mal0_def,
-	  .show		= &ocp_show_mal_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 15,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405ep_emac0_def,
-	  .show		= &ocp_show_emac_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0xEF600900,
-	  .irq		= 17,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405ep_emac1_def,
-	  .show		= &ocp_show_emac_data
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffff7f80,
-	  .triggering	= 0x00000000,
-	  .ext_irq_mask	= 0x0000007f,	/* IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm405ep.h b/arch/ppc/platforms/4xx/ibm405ep.h
deleted file mode 100644
index 3ef20a547080..000000000000
--- a/arch/ppc/platforms/4xx/ibm405ep.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * IBM PPC 405EP processor defines.
- *
- * Author: SAW (IBM), derived from ibm405gp.h.
- *         Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405EP_H__
-#define __ASM_IBM405EP_H__
-
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
-
-#if defined(CONFIG_UART0_TTYS0)
-#define ACTING_UART0_IO_BASE	UART0_IO_BASE
-#define ACTING_UART1_IO_BASE	UART1_IO_BASE
-#define ACTING_UART0_INT	UART0_INT
-#define ACTING_UART1_INT	UART1_INT
-#else
-#define ACTING_UART0_IO_BASE	UART1_IO_BASE
-#define ACTING_UART1_IO_BASE	UART0_IO_BASE
-#define ACTING_UART0_INT	UART1_INT
-#define ACTING_UART1_INT	UART0_INT
-#endif
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, ACTING_UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)ACTING_UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_DEBUG_IO_BASE	ACTING_UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* DCR defines */
-#define DCRN_CPMSR_BASE         0x0BA
-#define DCRN_CPMFR_BASE         0x0B9
-
-#define DCRN_CPC0_PLLMR0_BASE   0x0F0
-#define DCRN_CPC0_BOOT_BASE     0x0F1
-#define DCRN_CPC0_CR1_BASE      0x0F2
-#define DCRN_CPC0_EPRCSR_BASE   0x0F3
-#define DCRN_CPC0_PLLMR1_BASE   0x0F4
-#define DCRN_CPC0_UCR_BASE      0x0F5
-#define DCRN_CPC0_UCR_U0DIV     0x07F
-#define DCRN_CPC0_SRR_BASE      0x0F6
-#define DCRN_CPC0_JTAGID_BASE   0x0F7
-#define DCRN_CPC0_SPARE_BASE    0x0F8
-#define DCRN_CPC0_PCI_BASE      0x0F9
-
-
-#define IBM_CPM_GPT             0x80000000      /* GPT interface */
-#define IBM_CPM_PCI             0x40000000      /* PCI bridge */
-#define IBM_CPM_UIC             0x00010000      /* Universal Int Controller */
-#define IBM_CPM_CPU             0x00008000      /* processor core */
-#define IBM_CPM_EBC             0x00002000      /* EBC controller */
-#define IBM_CPM_SDRAM0          0x00004000      /* SDRAM memory controller */
-#define IBM_CPM_GPIO0           0x00001000      /* General Purpose IO */
-#define IBM_CPM_TMRCLK          0x00000400      /* CPU timers */
-#define IBM_CPM_PLB             0x00000100      /* PLB bus arbiter */
-#define IBM_CPM_OPB             0x00000080      /* PLB to OPB bridge */
-#define IBM_CPM_DMA             0x00000040      /* DMA controller */
-#define IBM_CPM_IIC0            0x00000010      /* IIC interface */
-#define IBM_CPM_UART1           0x00000002      /* serial port 0 */
-#define IBM_CPM_UART0           0x00000001      /* serial port 1 */
-#define DFLT_IBM4xx_PM          ~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
-                                        | IBM_CPM_OPB | IBM_CPM_EBC \
-                                        | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
-                                        | IBM_CPM_UIC | IBM_CPM_TMRCLK)
-#define DCRN_DMA0_BASE          0x100
-#define DCRN_DMA1_BASE          0x108
-#define DCRN_DMA2_BASE          0x110
-#define DCRN_DMA3_BASE          0x118
-#define DCRNCAP_DMA_SG          1       /* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE         0x120
-#define DCRN_EBC_BASE           0x012
-#define DCRN_DCP0_BASE          0x014
-#define DCRN_MAL_BASE           0x180
-#define DCRN_OCM0_BASE          0x018
-#define DCRN_PLB0_BASE          0x084
-#define DCRN_PLLMR_BASE         0x0B0
-#define DCRN_POB0_BASE          0x0A0
-#define DCRN_SDRAM0_BASE        0x010
-#define DCRN_UIC0_BASE          0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBM405EP_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405gp.c b/arch/ppc/platforms/4xx/ibm405gp.c
deleted file mode 100644
index 2ac67a2f0ba6..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gp.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *
- *    Copyright 2000-2001 MontaVista Software Inc.
- *      Original author: Armin Kuster akuster@mvista.com
- *
- *    Module name: ibm405gp.c
- *
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <platforms/4xx/ibm405gp.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm405gp_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm405gp_mal0_def = {
-	.num_tx_chans	= 1,		/* Number of TX channels */
-	.num_rx_chans	= 1,		/* Number of RX channels */
-	.txeob_irq	= 11,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 12,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 13,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 14,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 10,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm405gp_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm405gp_iic0_def,
-	  .show		= &ocp_show_iic_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405gp_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 15,
-	  .pm		= IBM_CPM_EMAC0,
-	  .additions	= &ibm405gp_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffffff80,
-	  .triggering	= 0x10000000,
-	  .ext_irq_mask	= 0x0000007f,	/* IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm405gp.h b/arch/ppc/platforms/4xx/ibm405gp.h
deleted file mode 100644
index 9f15e5518719..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gp.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Author: Armin Kuster akuster@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405GP_H__
-#define __ASM_IBM405GP_H__
-
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART1_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-#define DCRN_CHCR_BASE		0x0B1
-#define DCRN_CHPSR_BASE		0x0B4
-#define DCRN_CPMSR_BASE		0x0B8
-#define DCRN_CPMFR_BASE		0x0BA
-
-#define CHR0_U0EC	0x00000080	/* Select external clock for UART0 */
-#define CHR0_U1EC	0x00000040	/* Select external clock for UART1 */
-#define CHR0_UDIV	0x0000003E	/* UART internal clock divisor */
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-
-#define DCRN_CHPSR_BASE         0x0B4
-#define  PSR_PLL_FWD_MASK        0xC0000000
-#define  PSR_PLL_FDBACK_MASK     0x30000000
-#define  PSR_PLL_TUNING_MASK     0x0E000000
-#define  PSR_PLB_CPU_MASK        0x01800000
-#define  PSR_OPB_PLB_MASK        0x00600000
-#define  PSR_PCI_PLB_MASK        0x00180000
-#define  PSR_EB_PLB_MASK         0x00060000
-#define  PSR_ROM_WIDTH_MASK      0x00018000
-#define  PSR_ROM_LOC             0x00004000
-#define  PSR_PCI_ASYNC_EN        0x00001000
-#define  PSR_PCI_ARBIT_EN        0x00000400
-
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_PCI		0x40000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x20000000	/* processor core */
-#define IBM_CPM_DMA		0x10000000	/* DMA controller */
-#define IBM_CPM_OPB		0x08000000	/* PLB to OPB bridge */
-#define IBM_CPM_DCP		0x04000000	/* CodePack */
-#define IBM_CPM_EBC		0x02000000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0		0x01000000	/* SDRAM memory controller */
-#define IBM_CPM_PLB		0x00800000	/* PLB bus arbiter */
-#define IBM_CPM_GPIO0		0x00400000	/* General Purpose IO (??) */
-#define IBM_CPM_UART0		0x00200000	/* serial port 0 */
-#define IBM_CPM_UART1		0x00100000	/* serial port 1 */
-#define IBM_CPM_UIC		0x00080000	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00040000	/* CPU timers */
-#define IBM_CPM_EMAC0		0x00020000	/* on-chip ethernet MM unit */
-#define DFLT_IBM4xx_PM		~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
-					| IBM_CPM_OPB | IBM_CPM_EBC \
-					| IBM_CPM_SDRAM0 | IBM_CPM_PLB \
-					| IBM_CPM_UIC | IBM_CPM_TMRCLK)
-
-#define DCRN_DMA0_BASE		0x100
-#define DCRN_DMA1_BASE		0x108
-#define DCRN_DMA2_BASE		0x110
-#define DCRN_DMA3_BASE		0x118
-#define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE		0x120
-#define DCRN_EBC_BASE		0x012
-#define DCRN_DCP0_BASE		0x014
-#define DCRN_MAL_BASE		0x180
-#define DCRN_OCM0_BASE		0x018
-#define DCRN_PLB0_BASE		0x084
-#define DCRN_PLLMR_BASE		0x0B0
-#define DCRN_POB0_BASE		0x0A0
-#define DCRN_SDRAM0_BASE	0x010
-#define DCRN_UIC0_BASE		0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBM405GP_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405gpr.c b/arch/ppc/platforms/4xx/ibm405gpr.c
deleted file mode 100644
index 9f4dacffdbb3..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gpr.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <platforms/4xx/ibm405gpr.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm405gpr_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm405gpr_mal0_def = {
-	.num_tx_chans	= 1,		/* Number of TX channels */
-	.num_rx_chans	= 1,		/* Number of RX channels */
-	.txeob_irq	= 11,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 12,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 13,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 14,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 10,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm405gpr_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm405gpr_iic0_def,
-	  .show		= &ocp_show_iic_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405gpr_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 15,
-	  .pm		= IBM_CPM_EMAC0,
-	  .additions	= &ibm405gpr_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffffe000,
-	  .triggering	= 0x10000000,
-	  .ext_irq_mask	= 0x00001fff,	/* IRQ7 - IRQ12, IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm405gpr.h b/arch/ppc/platforms/4xx/ibm405gpr.h
deleted file mode 100644
index 9e01f1515de3..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gpr.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405GPR_H__
-#define __ASM_IBM405GPR_H__
-
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART1_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-#define DCRN_CHCR_BASE		0x0B1
-#define DCRN_CHPSR_BASE		0x0B4
-#define DCRN_CPMSR_BASE		0x0B8
-#define DCRN_CPMFR_BASE		0x0BA
-
-#define CHR0_U0EC	0x00000080	/* Select external clock for UART0 */
-#define CHR0_U1EC	0x00000040	/* Select external clock for UART1 */
-#define CHR0_UDIV	0x0000003E	/* UART internal clock divisor */
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-
-#define DCRN_CHPSR_BASE         0x0B4
-#define  PSR_PLL_FWD_MASK        0xC0000000
-#define  PSR_PLL_FDBACK_MASK     0x30000000
-#define  PSR_PLL_TUNING_MASK     0x0E000000
-#define  PSR_PLB_CPU_MASK        0x01800000
-#define  PSR_OPB_PLB_MASK        0x00600000
-#define  PSR_PCI_PLB_MASK        0x00180000
-#define  PSR_EB_PLB_MASK         0x00060000
-#define  PSR_ROM_WIDTH_MASK      0x00018000
-#define  PSR_ROM_LOC             0x00004000
-#define  PSR_PCI_ASYNC_EN        0x00001000
-#define  PSR_PCI_ARBIT_EN        0x00000400
-
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_PCI		0x40000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x20000000	/* processor core */
-#define IBM_CPM_DMA		0x10000000	/* DMA controller */
-#define IBM_CPM_OPB		0x08000000	/* PLB to OPB bridge */
-#define IBM_CPM_DCP		0x04000000	/* CodePack */
-#define IBM_CPM_EBC		0x02000000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0		0x01000000	/* SDRAM memory controller */
-#define IBM_CPM_PLB		0x00800000	/* PLB bus arbiter */
-#define IBM_CPM_GPIO0		0x00400000	/* General Purpose IO (??) */
-#define IBM_CPM_UART0		0x00200000	/* serial port 0 */
-#define IBM_CPM_UART1		0x00100000	/* serial port 1 */
-#define IBM_CPM_UIC		0x00080000	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00040000	/* CPU timers */
-#define IBM_CPM_EMAC0		0x00020000	/* on-chip ethernet MM unit */
-#define DFLT_IBM4xx_PM		~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
-					| IBM_CPM_OPB | IBM_CPM_EBC \
-					| IBM_CPM_SDRAM0 | IBM_CPM_PLB \
-					| IBM_CPM_UIC | IBM_CPM_TMRCLK)
-
-#define DCRN_DMA0_BASE		0x100
-#define DCRN_DMA1_BASE		0x108
-#define DCRN_DMA2_BASE		0x110
-#define DCRN_DMA3_BASE		0x118
-#define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE		0x120
-#define DCRN_EBC_BASE		0x012
-#define DCRN_DCP0_BASE		0x014
-#define DCRN_MAL_BASE		0x180
-#define DCRN_OCM0_BASE		0x018
-#define DCRN_PLB0_BASE		0x084
-#define DCRN_PLLMR_BASE		0x0B0
-#define DCRN_POB0_BASE		0x0A0
-#define DCRN_SDRAM0_BASE	0x010
-#define DCRN_UIC0_BASE		0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBM405GPR_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c
deleted file mode 100644
index 0de91532aabb..000000000000
--- a/arch/ppc/platforms/4xx/ibm440ep.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * PPC440EP I/O descriptions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <platforms/4xx/ibm440ep.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm440ep_emac0_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 0,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440ep_emac1_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 1,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 1,            /* MAL rx channel number */
-	.mal_tx_chan    = 2,            /* MAL tx channel number */
-	.wol_irq        = 63,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440ep_mal0_def = {
-	.num_tx_chans   = 4,  		/* Number of TX channels */
-	.num_rx_chans   = 2,    	/* Number of RX channels */
-	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 32,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440ep_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440ep_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0EF600000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440EP_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440EP_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= PPC440EP_UART2_ADDR,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 3,
-	  .paddr	= PPC440EP_UART3_ADDR,
-	  .irq		= UART3_INT,
-	  .pm		= IBM_CPM_UART3,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x0EF600700ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440ep_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x0EF600800ULL,
-	  .irq		= 7,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440ep_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x0EF600B00ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 1,
-	  .paddr	= 0x0EF600C00ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440ep_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x0EF600E00ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440ep_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0x0EF600F00ULL,
-	  .irq		= 62,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440ep_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0x0EF600D00ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity	= 0xffbffe03,
-	  .triggering   = 0x00000000,
-	  .ext_irq_mask = 0x000001fc,	/* IRQ0 - IRQ6 */
-	},
-	{ .polarity	= 0xffffc6af,
-	  .triggering	= 0x06000140,
-	  .ext_irq_mask = 0x00003800,	/* IRQ7 - IRQ9 */
-	},
-};
-
-static struct resource usb_gadget_resources[] = {
-	[0] = {
-		.start	= 0x050000100ULL,
-		.end 	= 0x05000017FULL,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 55,
-		.end	= 55,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-
-static struct platform_device usb_gadget_device = {
-	.name		= "musbhsfc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(usb_gadget_resources),
-	.resource       = usb_gadget_resources,
-	.dev		= {
-		.dma_mask = &dma_mask,
-		.coherent_dma_mask = 0xffffffffULL,
-	}
-};
-
-static struct platform_device *ibm440ep_devs[] __initdata = {
-	&usb_gadget_device,
-};
-
-static int __init
-ibm440ep_platform_add_devices(void)
-{
-	return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs));
-}
-arch_initcall(ibm440ep_platform_add_devices);
-
diff --git a/arch/ppc/platforms/4xx/ibm440ep.h b/arch/ppc/platforms/4xx/ibm440ep.h
deleted file mode 100644
index d92572727d20..000000000000
--- a/arch/ppc/platforms/4xx/ibm440ep.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * PPC440EP definitions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- *
- * Copyright 2002 Roland Dreier
- * Copyright 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440EP_H
-#define __PPC_PLATFORMS_IBM440EP_H
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440EP_UART0_ADDR		0x0EF600300
-#define PPC440EP_UART1_ADDR		0x0EF600400
-#define PPC440EP_UART2_ADDR		0x0EF600500
-#define PPC440EP_UART3_ADDR		0x0EF600600
-#define UART0_INT			0
-#define UART1_INT			1
-#define UART2_INT			3
-#define UART3_INT			4
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_USB1H		0x08000000	/* USB 1.1 Host */
-#define IBM_CPM_FPU		0x04000000	/* floating point unit */
-#define IBM_CPM_CPU		0x02000000	/* processor core */
-#define IBM_CPM_DMA		0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		0x00200000	/* External Bus Controller */
-#define IBM_CPM_EBM		0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB4		0x00040000	/* PLB4 bus arbiter */
-#define IBM_CPM_PLB4x3		0x00020000	/* PLB4 to PLB3 bridge controller */
-#define IBM_CPM_PLB3x4		0x00010000	/* PLB3 to PLB4 bridge controller */
-#define IBM_CPM_PLB3		0x00008000	/* PLB3 bus arbiter */
-#define IBM_CPM_PPM		0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0		0x00000020	/* ethernet port 0 */
-#define IBM_CPM_EMAC1		0x00000010	/* ethernet port 1 */
-#define IBM_CPM_UART2		0x00000008	/* serial port 2 */
-#define IBM_CPM_UART3		0x00000004	/* serial port 3 */
-#define IBM_CPM_USB2D		0x00000002	/* USB 2.0 Device */
-#define IBM_CPM_USB2H		0x00000001	/* USB 2.0 Host */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_BGO | IBM_CPM_FPU \
-				| IBM_CPM_EBM | IBM_CPM_PLB4 | IBM_CPM_3x4 \
-				| IBM_CPM_PLB3 | IBM_CPM_PLB4x3 \
-				| IBM_CPM_EMAC0 | IBM_CPM_TMRCLK \
-				| IBM_CPM_DMA | IBM_CPM_PCI | IBM_CPM_EMAC1)
-
-
-#endif /* __PPC_PLATFORMS_IBM440EP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440gp.c b/arch/ppc/platforms/4xx/ibm440gp.c
deleted file mode 100644
index b67a72e5c6fe..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gp.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * PPC440GP I/O descriptions
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ibm440gp.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm440gp_emac0_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 0,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440gp_emac1_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 1,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 1,            /* MAL rx channel number */
-	.mal_tx_chan    = 2,            /* MAL tx channel number */
-	.wol_irq        = 63,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440gp_mal0_def = {
-	.num_tx_chans   = 4,  		/* Number of TX channels */
-	.num_rx_chans   = 2,    	/* Number of RX channels */
-	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 32,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440gp_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440gp_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440GP_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440GP_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440gp_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440gp_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gp_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gp_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000900ULL,
-	  .irq		= 62,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gp_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0x0000000140000780ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xfffffe03,
-	  .triggering	= 0x01c00000,
-	  .ext_irq_mask	= 0x000001fc,	/* IRQ0 - IRQ6 */
-	},
-	{ .polarity 	= 0xffffc0ff,
-	  .triggering	= 0x00ff8000,
-	  .ext_irq_mask	= 0x00003f00,	/* IRQ7 - IRQ12 */
-	},
-};
diff --git a/arch/ppc/platforms/4xx/ibm440gp.h b/arch/ppc/platforms/4xx/ibm440gp.h
deleted file mode 100644
index 391c90e1f5ea..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gp.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PPC440GP definitions
- *
- * Roland Dreier <roland@digitalvampire.org>
- *
- * Copyright 2002 Roland Dreier
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This file contains code that was originally in the files ibm44x.h
- * and ebony.h, which were written by Matt Porter of MontaVista Software Inc.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440GP_H
-#define __PPC_PLATFORMS_IBM440GP_H
-
-
-/* UART */
-#define PPC440GP_UART0_ADDR	0x0000000140000200ULL
-#define PPC440GP_UART1_ADDR	0x0000000140000300ULL
-#define UART0_INT		0
-#define UART1_INT		1
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x02000000	/* processor core */
-#define IBM_CPM_DMA		0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI)
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-#include <asm/ibm44x.h>
-#include <syslib/ibm440gp_common.h>
-
-#endif /* __PPC_PLATFORMS_IBM440GP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440gx.c b/arch/ppc/platforms/4xx/ibm440gx.c
deleted file mode 100644
index 685abffcb6ce..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gx.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * PPC440GX I/O descriptions
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ibm440gx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm440gx_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 0,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,   	/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440gx_emac1_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 1,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 1,            /* MAL rx channel number */
-	.mal_tx_chan    = 1,            /* MAL tx channel number */
-	.wol_irq        = 63,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440gx_emac2_def = {
-	.rgmii_idx	= 0,		/* RGMII device index */
-	.rgmii_mux	= 0,		/* RGMII input of this EMAC */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 2,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 2,            /* MAL rx channel number */
-	.mal_tx_chan    = 2,            /* MAL tx channel number */
-	.wol_irq        = 65,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= 0,		/* TAH device index */
-};
-
-static struct ocp_func_emac_data ibm440gx_emac3_def = {
-	.rgmii_idx	= 0,		/* RGMII device index */
-	.rgmii_mux	= 1,		/* RGMII input of this EMAC */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 3,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 3,            /* MAL rx channel number */
-	.mal_tx_chan    = 3,            /* MAL tx channel number */
-	.wol_irq        = 67,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= 1,		/* TAH device index */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440gx_mal0_def = {
-	.num_tx_chans   = 4,    	/* Number of TX channels */
-	.num_rx_chans   = 4,    	/* Number of RX channels */
-	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 32,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440gx_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440gx_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440GX_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440GX_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440gx_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440gx_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000900ULL,
-	  .irq		= 62,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 2,
-	  .paddr	= 0x0000000140000C00ULL,
-	  .irq		= 64,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac2_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 3,
-	  .paddr	= 0x0000000140000E00ULL,
-	  .irq		= 66,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac3_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_RGMII,
-	  .paddr	= 0x0000000140000790ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0x0000000140000780ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_TAH,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000b50ULL,
-	  .irq		= 68,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_TAH,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000d50ULL,
-	  .irq		= 69,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xfffffe03,
-	  .triggering	= 0x01c00000,
-	  .ext_irq_mask	= 0x000001fc,	/* IRQ0 - IRQ6 */
-	},
-	{ .polarity 	= 0xffffc0ff,
-	  .triggering	= 0x00ff8000,
-	  .ext_irq_mask	= 0x00003f00,	/* IRQ7 - IRQ12 */
-	},
-	{ .polarity 	= 0xffff83ff,
-	  .triggering	= 0x000f83c0,
-	  .ext_irq_mask	= 0x00007c00,	/* IRQ13 - IRQ17 */
-	},
-};
diff --git a/arch/ppc/platforms/4xx/ibm440gx.h b/arch/ppc/platforms/4xx/ibm440gx.h
deleted file mode 100644
index 599c4289b9c2..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gx.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * PPC440GX definitions
- *
- * Matt Porter <mporter@mvista.com>
- *
- * Copyright 2002 Roland Dreier
- * Copyright 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440GX_H
-#define __PPC_PLATFORMS_IBM440GX_H
-
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440GX_UART0_ADDR	0x0000000140000200ULL
-#define PPC440GX_UART1_ADDR	0x0000000140000300ULL
-#define UART0_INT		0
-#define UART1_INT		1
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_RGMII		0x10000000	/* RGMII */
-#define IBM_CPM_TAHOE0		0x08000000	/* TAHOE 0 */
-#define IBM_CPM_TAHOE1		0x04000000	/* TAHOE 1 */
-#define IBM_CPM_CPU		    0x02000000	/* processor core */
-#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
-#define IBM_CPM_EMAC1  		0x00000010	/* EMAC 1     */
-#define IBM_CPM_EMAC2  		0x00000008	/* EMAC 2     */
-#define IBM_CPM_EMAC3  		0x00000004	/* EMAC 3     */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
-				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
-				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
-			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-#endif /* __PPC_PLATFORMS_IBM440GX_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c
deleted file mode 100644
index de8f7ac5623c..000000000000
--- a/arch/ppc/platforms/4xx/ibm440sp.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * PPC440SP I/O descriptions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ibm440sp.h>
-#include <asm/ocp.h>
-
-static struct ocp_func_emac_data ibm440sp_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = -1,           /* No ZMII */
-	.zmii_mux       = -1,           /* No ZMII */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440sp_mal0_def = {
-	.num_tx_chans   = 1,    	/* Number of TX channels */
-	.num_rx_chans   = 1,    	/* Number of RX channels */
-	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 33,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440sp_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440sp_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440SP_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440SP_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= PPC440SP_UART2_ADDR,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x00000001f0000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440sp_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x00000001f0000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440sp_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x00000001f0000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440sp_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x00000001f0000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440sp_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm440sp.h b/arch/ppc/platforms/4xx/ibm440sp.h
deleted file mode 100644
index 2978682f1720..000000000000
--- a/arch/ppc/platforms/4xx/ibm440sp.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * PPC440SP definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440SP_H
-#define __PPC_PLATFORMS_IBM440SP_H
-
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440SP_UART0_ADDR	0x00000001f0000200ULL
-#define PPC440SP_UART1_ADDR	0x00000001f0000300ULL
-#define PPC440SP_UART2_ADDR	0x00000001f0000600ULL
-#define UART0_INT		0
-#define UART1_INT		1
-#define UART2_INT		2
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_CPU		    0x02000000	/* processor core */
-#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
-				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
-				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
-			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
-#endif /* __PPC_PLATFORMS_IBM440SP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c
deleted file mode 100644
index 1afc3642e5b1..000000000000
--- a/arch/ppc/platforms/4xx/ibmnp405h.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include <platforms/4xx/ibmnp405h.h>
-
-static struct ocp_func_emac_data ibmnp405h_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibmnp405h_emac1_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 1,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 1,		/* MAL rx channel number */
-	.mal_tx_chan	= 2,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-static struct ocp_func_emac_data ibmnp405h_emac2_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 2,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 2,		/* MAL rx channel number */
-	.mal_tx_chan	= 4,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-static struct ocp_func_emac_data ibmnp405h_emac3_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 3,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 3,		/* MAL rx channel number */
-	.mal_tx_chan	= 6,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibmnp405h_mal0_def = {
-	.num_tx_chans	= 8,		/* Number of TX channels */
-	.num_rx_chans	= 4,		/* Number of RX channels */
-	.txeob_irq	= 17,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 18,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 46,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 47,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 45,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibmnp405h_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibmnp405h_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibmnp405h_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 37,
-	  .pm		= IBM_CPM_EMAC0,
-	  .additions	= &ibmnp405h_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0xEF600900,
-	  .irq		= 38,
-	  .pm		= IBM_CPM_EMAC1,
-	  .additions	= &ibmnp405h_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 2,
-	  .paddr	= 0xEF600a00,
-	  .irq		= 39,
-	  .pm		= IBM_CPM_EMAC2,
-	  .additions	= &ibmnp405h_emac2_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 3,
-	  .paddr	= 0xEF600b00,
-	  .irq		= 40,
-	  .pm		= IBM_CPM_EMAC3,
-	  .additions	= &ibmnp405h_emac3_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0xEF600C10,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h
deleted file mode 100644
index 08a6a7791903..000000000000
--- a/arch/ppc/platforms/4xx/ibmnp405h.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMNP405H_H__
-#define __ASM_IBMNP405H_H__
-
-
-/* ibm405.h at bottom of this file */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x00000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_ADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_ADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_ADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_ADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	4
-
-#define UART0_INT	0
-#define UART1_INT	1
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define OPB0_BASE	0xEF600600
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base:(u8 *) UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(0)          \
-        STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(1)          \
-        STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-/* ------------------------------------------------------------------------- */
-
-#define DCRN_CHCR_BASE	0x0F1
-#define DCRN_CHPSR_BASE	0x0B4
-#define DCRN_CPMSR_BASE	0x0BA
-#define DCRN_CPMFR_BASE	0x0B9
-#define DCRN_CPMER_BASE	0x0B8
-
-/* CPM Clocking & Power Management defines */
-#define IBM_CPM_PCI		0x40000000	/* PCI */
-#define IBM_CPM_EMAC2	0x20000000	/* EMAC 2 MII */
-#define IBM_CPM_EMAC3	0x04000000	/* EMAC 3 MII */
-#define IBM_CPM_EMAC0	0x00800000	/* EMAC 0 MII */
-#define IBM_CPM_EMAC1	0x00100000	/* EMAC 1 MII */
-#define IBM_CPM_EMMII	0	/* Shift value for MII */
-#define IBM_CPM_EMRX	1	/* Shift value for recv */
-#define IBM_CPM_EMTX	2	/* Shift value for MAC */
-#define IBM_CPM_UIC1	0x00020000	/* Universal Interrupt Controller */
-#define IBM_CPM_UIC0	0x00010000	/* Universal Interrupt Controller */
-#define IBM_CPM_CPU	0x00008000	/* processor core */
-#define IBM_CPM_EBC	0x00004000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0	0x00002000	/* SDRAM memory controller */
-#define IBM_CPM_GPIO0	0x00001000	/* General Purpose IO (??) */
-#define IBM_CPM_HDLC	0x00000800	/* HDCL */
-#define IBM_CPM_TMRCLK	0x00000400	/* CPU timers */
-#define IBM_CPM_PLB	0x00000100	/* PLB bus arbiter */
-#define IBM_CPM_OPB	0x00000080	/* PLB to OPB bridge */
-#define IBM_CPM_DMA	0x00000040	/* DMA controller */
-#define IBM_CPM_IIC0	0x00000010	/* IIC interface */
-#define IBM_CPM_UART0	0x00000002	/* serial port 0 */
-#define IBM_CPM_UART1	0x00000001	/* serial port 1 */
-/* this is the default setting for devices put to sleep when booting */
-
-#define DFLT_IBM4xx_PM	~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU 	\
-			| IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB 	\
-			| IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA	\
-			| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 | IBM_CPM_EMAC2	\
-			| IBM_CPM_EMAC3 | IBM_CPM_PCI)
-
-#define DCRN_DMA0_BASE	0x100
-#define DCRN_DMA1_BASE	0x108
-#define DCRN_DMA2_BASE	0x110
-#define DCRN_DMA3_BASE	0x118
-#define DCRNCAP_DMA_SG	1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE	0x120
-#define DCRN_EBC_BASE	0x012
-#define DCRN_DCP0_BASE	0x014
-#define DCRN_MAL_BASE	0x180
-#define DCRN_OCM0_BASE	0x018
-#define DCRN_PLB0_BASE	0x084
-#define DCRN_PLLMR_BASE	0x0B0
-#define DCRN_POB0_BASE	0x0A0
-#define DCRN_SDRAM0_BASE 0x010
-#define DCRN_UIC0_BASE	0x0C0
-#define DCRN_UIC1_BASE	0x0D0
-#define DCRN_CPC0_EPRCSR 0x0F3
-
-#define UIC0_UIC1NC	0x00000002
-
-#define CHR1_CETE	0x00000004	/* CPU external timer enable */
-#define UIC0	DCRN_UIC0_BASE
-#define UIC1	DCRN_UIC1_BASE
-
-#undef NR_UICS
-#define NR_UICS	2
-
-/* EMAC DCRN's FIXME: armin */
-#define DCRN_MALRXCTP2R(base)	((base) + 0x42)	/* Channel Rx 2 Channel Table Pointer */
-#define DCRN_MALRXCTP3R(base)	((base) + 0x43)	/* Channel Rx 3 Channel Table Pointer */
-#define DCRN_MALTXCTP4R(base)	((base) + 0x24)	/* Channel Tx 4 Channel Table Pointer */
-#define DCRN_MALTXCTP5R(base)	((base) + 0x25)	/* Channel Tx 5 Channel Table Pointer */
-#define DCRN_MALTXCTP6R(base)	((base) + 0x26)	/* Channel Tx 6 Channel Table Pointer */
-#define DCRN_MALTXCTP7R(base)	((base) + 0x27)	/* Channel Tx 7 Channel Table Pointer */
-#define DCRN_MALRCBS2(base)	((base) + 0x62)	/* Channel Rx 2 Channel Buffer Size */
-#define DCRN_MALRCBS3(base)	((base) + 0x63)	/* Channel Rx 3 Channel Buffer Size */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMNP405H_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmstb4.c b/arch/ppc/platforms/4xx/ibmstb4.c
deleted file mode 100644
index 799a2eccccc3..000000000000
--- a/arch/ppc/platforms/4xx/ibmstb4.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-#include <platforms/4xx/ibmstb4.h>
-
-static struct ocp_func_iic_data ibmstb4_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibmstb4_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] __initdata = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= UART2_IO_BASE,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= IIC0_BASE,
-	  .irq		= IIC0_IRQ,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibmstb4_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= IIC1_BASE,
-	  .irq		= IIC1_IRQ,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibmstb4_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= GPIO0_BASE,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IDE,
-	  .paddr	= IDE0_BASE,
-	  .irq		= IDE0_IRQ,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID,
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0x7fffff01,
-	  .triggering	= 0x00000000,
-	  .ext_irq_mask	= 0x0000007e,	/* IRQ0 - IRQ5 */
-	}
-};
-
-static struct resource ohci_usb_resources[] = {
-	[0] = {
-		.start	= USB0_BASE,
-		.end	= USB0_BASE + USB0_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= USB0_IRQ,
-		.end	= USB0_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-
-static struct platform_device ohci_usb_device = {
-	.name		= "ppc-soc-ohci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ohci_usb_resources),
-	.resource	= ohci_usb_resources,
-	.dev		= {
-		.dma_mask = &dma_mask,
-		.coherent_dma_mask = 0xffffffffULL,
-	}
-};
-
-static struct platform_device *ibmstb4_devs[] __initdata = {
-	&ohci_usb_device,
-};
-
-static int __init
-ibmstb4_platform_add_devices(void)
-{
-	return platform_add_devices(ibmstb4_devs, ARRAY_SIZE(ibmstb4_devs));
-}
-arch_initcall(ibmstb4_platform_add_devices);
diff --git a/arch/ppc/platforms/4xx/ibmstb4.h b/arch/ppc/platforms/4xx/ibmstb4.h
deleted file mode 100644
index 31a08abaa4a2..000000000000
--- a/arch/ppc/platforms/4xx/ibmstb4.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMSTB4_H__
-#define __ASM_IBMSTB4_H__
-
-
-/* serial port defines */
-#define STB04xxx_IO_BASE	((uint)0xe0000000)
-#define PPC4xx_PCI_IO_ADDR	STB04xxx_IO_BASE
-#define PPC4xx_ONB_IO_PADDR	STB04xxx_IO_BASE
-#define PPC4xx_ONB_IO_VADDR	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_SIZE	((uint)14*64*1024)
-
-/*
- * map STB04xxx internal i/o address (0x400x00xx) to an address
- * which is below the 2GB limit...
- *
- * 4000 000x	uart1		-> 0xe000 000x
- * 4001 00xx	ppu
- * 4002 00xx	smart card
- * 4003 000x	iic
- * 4004 000x	uart0
- * 4005 0xxx	timer
- * 4006 00xx	gpio
- * 4007 00xx	smart card
- * 400b 000x	iic
- * 400c 000x	scp
- * 400d 000x	modem
- * 400e 000x	uart2
-*/
-#define STB04xxx_MAP_IO_ADDR(a)	(((uint)(a)) + (STB04xxx_IO_BASE - 0x40000000))
-
-#define RS_TABLE_SIZE		3
-#define UART0_INT		20
-
-#ifdef __BOOTER__
-#define UART0_IO_BASE		0x40040000
-#else
-#define UART0_IO_BASE		0xe0040000
-#endif
-
-#define UART1_INT		21
-
-#ifdef __BOOTER__
-#define UART1_IO_BASE		0x40000000
-#else
-#define UART1_IO_BASE		0xe0000000
-#endif
-
-#define UART2_INT		31
-#ifdef __BOOTER__
-#define UART2_IO_BASE		0x400e0000
-#else
-#define UART2_IO_BASE		0xe00e0000
-#endif
-
-#define IDE0_BASE	0x400F0000
-#define IDE0_SIZE	0x200
-#define IDE0_IRQ	25
-#define IIC0_BASE	0x40030000
-#define IIC1_BASE	0x400b0000
-#define OPB0_BASE	0x40000000
-#define GPIO0_BASE	0x40060000
-
-#define USB0_BASE	0x40010000
-#define USB0_SIZE	0xA0
-#define USB0_IRQ	18
-
-#define IIC_NUMS 2
-#define UART_NUMS	3
-#define IIC0_IRQ	9
-#define IIC1_IRQ	10
-#define IIC_OWN		0x55
-#define IIC_CLOCK	50
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS2)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(2)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRNCAP_DMA_CC		1	/* have DMA chained count capability */
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_PLB0_BASE		0x054
-#define DCRN_PLB1_BASE		0x064
-#define DCRN_POB0_BASE		0x0B0
-#define DCRN_SCCR_BASE		0x120
-#define DCRN_UIC0_BASE		0x040
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRN_CIC_BASE 		0x030
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_EBIMC_BASE		0x070
-#define DCRN_DCRX_BASE		0x020
-#define DCRN_CPMFR_BASE		0x102
-#define DCRN_SCCR_BASE		0x120
-#define UIC0 DCRN_UIC0_BASE
-
-#define IBM_CPM_IIC0	0x80000000	/* IIC 0 interface */
-#define IBM_CPM_USB0	0x40000000	/* IEEE-1284 */
-#define IBM_CPM_IIC1	0x20000000	/* IIC 1 interface */
-#define IBM_CPM_CPU	0x10000000	/* PPC405B3 clock control */
-#define IBM_CPM_AUD	0x08000000	/* Audio Decoder */
-#define IBM_CPM_EBIU	0x04000000	/* External Bus Interface Unit */
-#define IBM_CPM_SDRAM1	0x02000000	/* SDRAM 1 memory controller */
-#define IBM_CPM_DMA	0x01000000	/* DMA controller */
-#define IBM_CPM_DMA1	0x00800000	/* reserved */
-#define IBM_CPM_XPT1	0x00400000	/* reserved */
-#define IBM_CPM_XPT2	0x00200000	/* reserved */
-#define IBM_CPM_UART1	0x00100000	/* Serial 1 / Infrared */
-#define IBM_CPM_UART0	0x00080000	/* Serial 0 / 16550 */
-#define IBM_CPM_EPI	0x00040000	/* DCR Extension */
-#define IBM_CPM_SC0	0x00020000	/* Smart Card 0 */
-#define IBM_CPM_VID	0x00010000	/* reserved */
-#define IBM_CPM_SC1	0x00008000	/* Smart Card 1 */
-#define IBM_CPM_USBSDRA	0x00004000	/* SDRAM 0 memory controller */
-#define IBM_CPM_XPT0	0x00002000	/* Transport - 54 Mhz */
-#define IBM_CPM_CBS	0x00001000	/* Cross Bar Switch */
-#define IBM_CPM_GPT	0x00000800	/* GPTPWM */
-#define IBM_CPM_GPIO0	0x00000400	/* General Purpose IO 0 */
-#define IBM_CPM_DENC	0x00000200	/* Digital video Encoder */
-#define IBM_CPM_TMRCLK	0x00000100	/* CPU timers */
-#define IBM_CPM_XPT27	0x00000080	/* Transport - 27 Mhz */
-#define IBM_CPM_UIC	0x00000040	/* Universal Interrupt Controller */
-#define IBM_CPM_SSP	0x00000010	/* Modem Serial Interface (SSP) */
-#define IBM_CPM_UART2	0x00000008	/* Serial Control Port */
-#define IBM_CPM_DDIO	0x00000004	/* Descrambler */
-#define IBM_CPM_VID2	0x00000002	/* Video Decoder clock domain 2 */
-
-#define DFLT_IBM4xx_PM	~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \
-			| IBM_CPM_DMA | IBM_CPM_DMA1 | IBM_CPM_CBS \
-			| IBM_CPM_USBSDRA | IBM_CPM_XPT0 | IBM_CPM_TMRCLK \
-			| IBM_CPM_XPT27 | IBM_CPM_UIC )
-
-#define DCRN_BEAR	(DCRN_BE_BASE + 0x0)	/* Bus Error Address Register */
-#define DCRN_BESR	(DCRN_BE_BASE + 0x1)	/* Bus Error Syndrome Register */
-/* DCRN_BESR */
-#define BESR_DSES	0x80000000	/* Data-Side Error Status */
-#define BESR_DMES	0x40000000	/* DMA Error Status */
-#define BESR_RWS	0x20000000	/* Read/Write Status */
-#define BESR_ETMASK	0x1C000000	/* Error Type */
-#define ET_PROT		0
-#define ET_PARITY	1
-#define ET_NCFG		2
-#define ET_BUSERR	4
-#define ET_BUSTO	6
-
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-#define CHR1_PCIPW	0x00008000	/* PCI Int enable/Peripheral Write enable */
-
-#define DCRN_CICCR	(DCRN_CIC_BASE + 0x0)	/* CIC Control Register */
-#define DCRN_DMAS1	(DCRN_CIC_BASE + 0x1)	/* DMA Select1 Register */
-#define DCRN_DMAS2	(DCRN_CIC_BASE + 0x2)	/* DMA Select2 Register */
-#define DCRN_CICVCR	(DCRN_CIC_BASE + 0x3)	/* CIC Video COntro Register */
-#define DCRN_CICSEL3	(DCRN_CIC_BASE + 0x5)	/* CIC Select 3 Register */
-#define DCRN_SGPO	(DCRN_CIC_BASE + 0x6)	/* CIC GPIO Output Register */
-#define DCRN_SGPOD	(DCRN_CIC_BASE + 0x7)	/* CIC GPIO OD Register */
-#define DCRN_SGPTC	(DCRN_CIC_BASE + 0x8)	/* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI	(DCRN_CIC_BASE + 0x9)	/* CIC GPIO Input Reg */
-
-#define DCRN_DCRXICR	(DCRN_DCRX_BASE + 0x0)	/* Internal Control Register */
-#define DCRN_DCRXISR	(DCRN_DCRX_BASE + 0x1)	/* Internal Status Register */
-#define DCRN_DCRXECR	(DCRN_DCRX_BASE + 0x2)	/* External Control Register */
-#define DCRN_DCRXESR	(DCRN_DCRX_BASE + 0x3)	/* External Status Register */
-#define DCRN_DCRXTAR	(DCRN_DCRX_BASE + 0x4)	/* Target Address Register */
-#define DCRN_DCRXTDR	(DCRN_DCRX_BASE + 0x5)	/* Target Data Register */
-#define DCRN_DCRXIGR	(DCRN_DCRX_BASE + 0x6)	/* Interrupt Generation Register */
-#define DCRN_DCRXBCR	(DCRN_DCRX_BASE + 0x7)	/* Line Buffer Control Register */
-
-#define DCRN_BRCRH0	(DCRN_EBIMC_BASE + 0x0)	/* Bus Region Config High 0 */
-#define DCRN_BRCRH1	(DCRN_EBIMC_BASE + 0x1)	/* Bus Region Config High 1 */
-#define DCRN_BRCRH2	(DCRN_EBIMC_BASE + 0x2)	/* Bus Region Config High 2 */
-#define DCRN_BRCRH3	(DCRN_EBIMC_BASE + 0x3)	/* Bus Region Config High 3 */
-#define DCRN_BRCRH4	(DCRN_EBIMC_BASE + 0x4)	/* Bus Region Config High 4 */
-#define DCRN_BRCRH5	(DCRN_EBIMC_BASE + 0x5)	/* Bus Region Config High 5 */
-#define DCRN_BRCRH6	(DCRN_EBIMC_BASE + 0x6)	/* Bus Region Config High 6 */
-#define DCRN_BRCRH7	(DCRN_EBIMC_BASE + 0x7)	/* Bus Region Config High 7 */
-#define DCRN_BRCR0	(DCRN_EBIMC_BASE + 0x10)	/* BRC 0 */
-#define DCRN_BRCR1	(DCRN_EBIMC_BASE + 0x11)	/* BRC 1 */
-#define DCRN_BRCR2	(DCRN_EBIMC_BASE + 0x12)	/* BRC 2 */
-#define DCRN_BRCR3	(DCRN_EBIMC_BASE + 0x13)	/* BRC 3 */
-#define DCRN_BRCR4	(DCRN_EBIMC_BASE + 0x14)	/* BRC 4 */
-#define DCRN_BRCR5	(DCRN_EBIMC_BASE + 0x15)	/* BRC 5 */
-#define DCRN_BRCR6	(DCRN_EBIMC_BASE + 0x16)	/* BRC 6 */
-#define DCRN_BRCR7	(DCRN_EBIMC_BASE + 0x17)	/* BRC 7 */
-#define DCRN_BEAR0	(DCRN_EBIMC_BASE + 0x20)	/* Bus Error Address Register */
-#define DCRN_BESR0	(DCRN_EBIMC_BASE + 0x21)	/* Bus Error Status Register */
-#define DCRN_BIUCR	(DCRN_EBIMC_BASE + 0x2A)	/* Bus Interfac Unit Ctrl Reg */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMSTB4_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmstbx25.c b/arch/ppc/platforms/4xx/ibmstbx25.c
deleted file mode 100644
index 090ddcbecc5e..000000000000
--- a/arch/ppc/platforms/4xx/ibmstbx25.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include <platforms/4xx/ibmstbx25.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_iic_data ibmstbx25_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] __initdata = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index        = 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= UART2_IO_BASE,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= IIC0_BASE,
-	  .irq		= IIC0_IRQ,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibmstbx25_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= GPIO0_BASE,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffff8f80,
-	  .triggering	= 0x00000000,
-	  .ext_irq_mask	= 0x0000707f,	/* IRQ7 - IRQ9, IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibmstbx25.h b/arch/ppc/platforms/4xx/ibmstbx25.h
deleted file mode 100644
index 31b63343e641..000000000000
--- a/arch/ppc/platforms/4xx/ibmstbx25.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMSTBX25_H__
-#define __ASM_IBMSTBX25_H__
-
-
-/* serial port defines */
-#define STBx25xx_IO_BASE	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_PADDR	STBx25xx_IO_BASE
-#define PPC4xx_ONB_IO_VADDR	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_SIZE	((uint)14*64*1024)
-
-/*
- * map STBxxxx internal i/o address (0x400x00xx) to an address
- * which is below the 2GB limit...
- *
- * 4000 000x	uart1		-> 0xe000 000x
- * 4001 00xx	uart2
- * 4002 00xx	smart card
- * 4003 000x	iic
- * 4004 000x	uart0
- * 4005 0xxx	timer
- * 4006 00xx	gpio
- * 4007 00xx	smart card
- * 400b 000x	iic
- * 400c 000x	scp
- * 400d 000x	modem
- * 400e 000x	uart2
-*/
-#define STBx25xx_MAP_IO_ADDR(a)	(((uint)(a)) + (STBx25xx_IO_BASE - 0x40000000))
-
-#define RS_TABLE_SIZE	3
-
-#define OPB_BASE_START	0x40000000
-#define EBIU_BASE_START	0xF0100000
-#define DCR_BASE_START  0x0000
-
-#ifdef __BOOTER__
-#define UART1_IO_BASE	0x40000000
-#define UART2_IO_BASE	0x40010000
-#else
-#define UART1_IO_BASE	0xe0000000
-#define UART2_IO_BASE	0xe0010000
-#endif
-#define SC0_BASE	0x40020000	/* smart card #0 */
-#define IIC0_BASE	0x40030000
-#ifdef __BOOTER__
-#define UART0_IO_BASE	0x40040000
-#else
-#define UART0_IO_BASE	0xe0040000
-#endif
-#define SCC0_BASE	0x40040000	/* Serial 0 controller IrdA */
-#define GPT0_BASE	0x40050000	/* General purpose timers */
-#define GPIO0_BASE	0x40060000
-#define SC1_BASE	0x40070000	/* smart card #1 */
-#define SCP0_BASE	0x400C0000	/* Serial Controller Port */
-#define SSP0_BASE	0x400D0000	/* Sync serial port */
-
-#define IDE0_BASE		0xf0100000
-#define REDWOOD_IDE_CTRL	0xf1100000
-
-#define RTCFPC_IRQ	0
-#define XPORT_IRQ	1
-#define AUD_IRQ		2
-#define AID_IRQ		3
-#define DMA0		4
-#define DMA1_IRQ	5
-#define DMA2_IRQ	6
-#define DMA3_IRQ	7
-#define SC0_IRQ		8
-#define IIC0_IRQ	9
-#define IIR0_IRQ	10
-#define GPT0_IRQ	11
-#define GPT1_IRQ	12
-#define SCP0_IRQ	13
-#define SSP0_IRQ	14
-#define GPT2_IRQ	15	/* count down timer */
-#define SC1_IRQ		16
-/* IRQ 17 - 19  external */
-#define UART0_INT	20
-#define UART1_INT	21
-#define UART2_INT	22
-#define XPTDMA_IRQ	23
-#define DCRIDE_IRQ	24
-/* IRQ 25 - 30 external */
-#define IDE0_IRQ	26
-
-#define IIC_NUMS	1
-#define UART_NUMS	3
-#define IIC_OWN		0x55
-#define IIC_CLOCK	50
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS2)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(2)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRNCAP_DMA_CC		1	/* have DMA chained count capability */
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_PLB0_BASE		0x054
-#define DCRN_PLB1_BASE		0x064
-#define DCRN_POB0_BASE		0x0B0
-#define DCRN_SCCR_BASE		0x120
-#define DCRN_UIC0_BASE		0x040
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRN_CIC_BASE 		0x030
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_EBIMC_BASE		0x070
-#define DCRN_DCRX_BASE		0x020
-#define DCRN_CPMFR_BASE		0x102
-#define DCRN_SCCR_BASE		0x120
-#define DCRN_RTCFP_BASE		0x310
-
-#define UIC0 DCRN_UIC0_BASE
-
-#define IBM_CPM_IIC0	0x80000000	/* IIC 0 interface */
-#define IBM_CPM_CPU	0x10000000	/* PPC405B3 clock control */
-#define IBM_CPM_AUD	0x08000000	/* Audio Decoder */
-#define IBM_CPM_EBIU	0x04000000	/* External Bus Interface Unit */
-#define IBM_CPM_IRR	0x02000000	/* Infrared receiver */
-#define IBM_CPM_DMA	0x01000000	/* DMA controller */
-#define IBM_CPM_UART2	0x00200000	/* Serial Control Port */
-#define IBM_CPM_UART1	0x00100000	/* Serial 1 / Infrared */
-#define IBM_CPM_UART0	0x00080000	/* Serial 0 / 16550 */
-#define IBM_PM_DCRIDE	0x00040000	/* DCR timeout & IDE line Mode clock */
-#define IBM_CPM_SC0	0x00020000	/* Smart Card 0 */
-#define IBM_CPM_VID	0x00010000	/* reserved */
-#define IBM_CPM_SC1	0x00008000	/* Smart Card 0 */
-#define IBM_CPM_XPT0	0x00002000	/* Transport - 54 Mhz */
-#define IBM_CPM_CBS	0x00001000	/* Cross Bar Switch */
-#define IBM_CPM_GPT	0x00000800	/* GPTPWM */
-#define IBM_CPM_GPIO0	0x00000400	/* General Purpose IO 0 */
-#define IBM_CPM_DENC	0x00000200	/* Digital video Encoder */
-#define IBM_CPM_C405T	0x00000100	/* CPU timers */
-#define IBM_CPM_XPT27	0x00000080	/* Transport - 27 Mhz */
-#define IBM_CPM_UIC	0x00000040	/* Universal Interrupt Controller */
-#define IBM_CPM_RTCFPC	0x00000020	/* Realtime clock and front panel */
-#define IBM_CPM_SSP	0x00000010	/* Modem Serial Interface (SSP) */
-#define IBM_CPM_VID2	0x00000002	/* Video Decoder clock domain 2 */
-#define DFLT_IBM4xx_PM	~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_DMA	\
-			| IBM_CPM_CBS | IBM_CPM_XPT0 | IBM_CPM_C405T 	\
-			| IBM_CPM_XPT27 | IBM_CPM_UIC)
-
-#define DCRN_BEAR	(DCRN_BE_BASE + 0x0)	/* Bus Error Address Register */
-#define DCRN_BESR	(DCRN_BE_BASE + 0x1)	/* Bus Error Syndrome Register */
-/* DCRN_BESR */
-#define BESR_DSES	0x80000000	/* Data-Side Error Status */
-#define BESR_DMES	0x40000000	/* DMA Error Status */
-#define BESR_RWS	0x20000000	/* Read/Write Status */
-#define BESR_ETMASK	0x1C000000	/* Error Type */
-#define ET_PROT		0
-#define ET_PARITY	1
-#define ET_NCFG		2
-#define ET_BUSERR	4
-#define ET_BUSTO	6
-
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-#define CHR1_PCIPW	0x00008000	/* PCI Int enable/Peripheral Write enable */
-
-#define DCRN_CICCR	(DCRN_CIC_BASE + 0x0)	/* CIC Control Register */
-#define DCRN_DMAS1	(DCRN_CIC_BASE + 0x1)	/* DMA Select1 Register */
-#define DCRN_DMAS2	(DCRN_CIC_BASE + 0x2)	/* DMA Select2 Register */
-#define DCRN_CICVCR	(DCRN_CIC_BASE + 0x3)	/* CIC Video COntro Register */
-#define DCRN_CICSEL3	(DCRN_CIC_BASE + 0x5)	/* CIC Select 3 Register */
-#define DCRN_SGPO	(DCRN_CIC_BASE + 0x6)	/* CIC GPIO Output Register */
-#define DCRN_SGPOD	(DCRN_CIC_BASE + 0x7)	/* CIC GPIO OD Register */
-#define DCRN_SGPTC	(DCRN_CIC_BASE + 0x8)	/* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI	(DCRN_CIC_BASE + 0x9)	/* CIC GPIO Input Reg */
-
-#define DCRN_DCRXICR	(DCRN_DCRX_BASE + 0x0)	/* Internal Control Register */
-#define DCRN_DCRXISR	(DCRN_DCRX_BASE + 0x1)	/* Internal Status Register */
-#define DCRN_DCRXECR	(DCRN_DCRX_BASE + 0x2)	/* External Control Register */
-#define DCRN_DCRXESR	(DCRN_DCRX_BASE + 0x3)	/* External Status Register */
-#define DCRN_DCRXTAR	(DCRN_DCRX_BASE + 0x4)	/* Target Address Register */
-#define DCRN_DCRXTDR	(DCRN_DCRX_BASE + 0x5)	/* Target Data Register */
-#define DCRN_DCRXIGR	(DCRN_DCRX_BASE + 0x6)	/* Interrupt Generation Register */
-#define DCRN_DCRXBCR	(DCRN_DCRX_BASE + 0x7)	/* Line Buffer Control Register */
-
-#define DCRN_BRCRH0	(DCRN_EBIMC_BASE + 0x0)	/* Bus Region Config High 0 */
-#define DCRN_BRCRH1	(DCRN_EBIMC_BASE + 0x1)	/* Bus Region Config High 1 */
-#define DCRN_BRCRH2	(DCRN_EBIMC_BASE + 0x2)	/* Bus Region Config High 2 */
-#define DCRN_BRCRH3	(DCRN_EBIMC_BASE + 0x3)	/* Bus Region Config High 3 */
-#define DCRN_BRCRH4	(DCRN_EBIMC_BASE + 0x4)	/* Bus Region Config High 4 */
-#define DCRN_BRCRH5	(DCRN_EBIMC_BASE + 0x5)	/* Bus Region Config High 5 */
-#define DCRN_BRCRH6	(DCRN_EBIMC_BASE + 0x6)	/* Bus Region Config High 6 */
-#define DCRN_BRCRH7	(DCRN_EBIMC_BASE + 0x7)	/* Bus Region Config High 7 */
-#define DCRN_BRCR0	(DCRN_EBIMC_BASE + 0x10)	/* BRC 0 */
-#define DCRN_BRCR1	(DCRN_EBIMC_BASE + 0x11)	/* BRC 1 */
-#define DCRN_BRCR2	(DCRN_EBIMC_BASE + 0x12)	/* BRC 2 */
-#define DCRN_BRCR3	(DCRN_EBIMC_BASE + 0x13)	/* BRC 3 */
-#define DCRN_BRCR4	(DCRN_EBIMC_BASE + 0x14)	/* BRC 4 */
-#define DCRN_BRCR5	(DCRN_EBIMC_BASE + 0x15)	/* BRC 5 */
-#define DCRN_BRCR6	(DCRN_EBIMC_BASE + 0x16)	/* BRC 6 */
-#define DCRN_BRCR7	(DCRN_EBIMC_BASE + 0x17)	/* BRC 7 */
-#define DCRN_BEAR0	(DCRN_EBIMC_BASE + 0x20)	/* Bus Error Address Register */
-#define DCRN_BESR0	(DCRN_EBIMC_BASE + 0x21)	/* Bus Error Status Register */
-#define DCRN_BIUCR	(DCRN_EBIMC_BASE + 0x2A)	/* Bus Interfac Unit Ctrl Reg */
-
-#define DCRN_RTC_FPC0_CNTL 	(DCRN_RTCFP_BASE + 0x00)	/* RTC cntl */
-#define DCRN_RTC_FPC0_INT 	(DCRN_RTCFP_BASE + 0x01)	/* RTC Interrupt */
-#define DCRN_RTC_FPC0_TIME 	(DCRN_RTCFP_BASE + 0x02)	/* RTC time reg */
-#define DCRN_RTC_FPC0_ALRM 	(DCRN_RTCFP_BASE + 0x03)	/* RTC Alarm reg */
-#define DCRN_RTC_FPC0_D1 	(DCRN_RTCFP_BASE + 0x04)	/* LED Data 1 */
-#define DCRN_RTC_FPC0_D2 	(DCRN_RTCFP_BASE + 0x05)	/* LED Data 2 */
-#define DCRN_RTC_FPC0_D3 	(DCRN_RTCFP_BASE + 0x06)	/* LED Data 3 */
-#define DCRN_RTC_FPC0_D4 	(DCRN_RTCFP_BASE + 0x07)	/* LED Data 4 */
-#define DCRN_RTC_FPC0_D5 	(DCRN_RTCFP_BASE + 0x08)	/* LED Data 5 */
-#define DCRN_RTC_FPC0_FCNTL 	(DCRN_RTCFP_BASE + 0x09)	/* LED control */
-#define DCRN_RTC_FPC0_BRT 	(DCRN_RTCFP_BASE + 0x0A)	/* Brightness cntl */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMSTBX25_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
deleted file mode 100644
index f6d8c2e8b6b7..000000000000
--- a/arch/ppc/platforms/4xx/luan.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * Luan board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/ibm44x_common.h>
-#include <syslib/ibm440gx_common.h>
-#include <syslib/ibm440sp_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-luan_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = LUAN_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-luan_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440SP EVB (Luan)\n");
-
-	return 0;
-}
-
-static inline int
-luan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	/* PCIX0 in adapter mode, no host interrupt routing */
-
-	/* PCIX1 */
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 49, 49, 49, 49 },	/* IDSEL 1 - PCIX1 Slot 0 */
-			{ 49, 49, 49, 49 },	/* IDSEL 2 - PCIX1 Slot 1 */
-			{ 49, 49, 49, 49 },	/* IDSEL 3 - PCIX1 Slot 2 */
-			{ 49, 49, 49, 49 },	/* IDSEL 4 - PCIX1 Slot 3 */
-		};
-		const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	/* PCIX2 */
-	} else if (hose->index == 1) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 50, 50, 50, 50 },	/* IDSEL 1 - PCIX2 Slot 0 */
-			{ 50, 50, 50, 50 },	/* IDSEL 2 - PCIX2 Slot 1 */
-			{ 50, 50, 50, 50 },	/* IDSEL 3 - PCIX2 Slot 2 */
-			{ 50, 50, 50, 50 },	/* IDSEL 4 - PCIX2 Slot 3 */
-		};
-		const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-	return -1;
-}
-
-static void __init luan_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-
-	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_GMII;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-}
-
-#define PCIX_READW(offset) \
-	(readw((void *)((u32)pcix_reg_base+offset)))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, (void *)((u32)pcix_reg_base+offset)))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, (void *)((u32)pcix_reg_base+offset)))
-
-static void __init
-luan_setup_pcix(void)
-{
-	int i;
-	void *pcix_reg_base;
-
-	for (i=0;i<3;i++) {
-		pcix_reg_base = ioremap64(PCIX0_REG_BASE + i*PCIX_REG_OFFSET, PCIX_REG_SIZE);
-
-		/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-		PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-		/* Disable all windows */
-		PCIX_WRITEL(0, PCIX0_POM0SA);
-		PCIX_WRITEL(0, PCIX0_POM1SA);
-		PCIX_WRITEL(0, PCIX0_POM2SA);
-		PCIX_WRITEL(0, PCIX0_PIM0SA);
-		PCIX_WRITEL(0, PCIX0_PIM0SAH);
-		PCIX_WRITEL(0, PCIX0_PIM1SA);
-		PCIX_WRITEL(0, PCIX0_PIM2SA);
-		PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-		/*
-		 * Setup 512MB PLB->PCI outbound mem window
-		 * (a_n000_0000->0_n000_0000)
-		 * */
-		PCIX_WRITEL(0x0000000a, PCIX0_POM0LAH);
-		PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0LAL);
-		PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-		PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0PCIAL);
-		PCIX_WRITEL(0xe0000001, PCIX0_POM0SA);
-
-		/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-		PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-		PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-		PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
-		PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
-
-		iounmap(pcix_reg_base);
-	}
-
-	eieio();
-}
-
-static void __init
-luan_setup_hose(struct pci_controller *hose,
-		int lower_mem,
-		int upper_mem,
-		int cfga,
-		int cfgd,
-		u64 pcix_io_base)
-{
-	char name[20];
-
-	sprintf(name, "PCIX%d host bridge", hose->index);
-
-	hose->pci_mem_offset = LUAN_PCIX_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			LUAN_PCIX_LOWER_IO,
-			LUAN_PCIX_UPPER_IO,
-			IORESOURCE_IO,
-			name);
-
-	pci_init_resource(&hose->mem_resources[0],
-			lower_mem,
-			upper_mem,
-			IORESOURCE_MEM,
-			name);
-
-	hose->io_space.start = LUAN_PCIX_LOWER_IO;
-	hose->io_space.end = LUAN_PCIX_UPPER_IO;
-	hose->mem_space.start = lower_mem;
-	hose->mem_space.end = upper_mem;
-	hose->io_base_virt = ioremap64(pcix_io_base, PCIX_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose, cfga, cfgd);
-	hose->set_cfg_type = 1;
-}
-
-static void __init
-luan_setup_hoses(void)
-{
-	struct pci_controller *hose1, *hose2;
-
-	/* Configure windows on the PCI-X host bridge */
-	luan_setup_pcix();
-
-	/* Allocate hoses for PCIX1 and PCIX2 */
-	hose1 = pcibios_alloc_controller();
-	if (!hose1)
-		return;
-
-	hose2 = pcibios_alloc_controller();
-	if (!hose2) {
-		pcibios_free_controller(hose1);
-		return;
-	}
-
-	/* Setup PCIX1 */
-	hose1->first_busno = 0;
-	hose1->last_busno = 0xff;
-
-	luan_setup_hose(hose1,
-			LUAN_PCIX1_LOWER_MEM,
-			LUAN_PCIX1_UPPER_MEM,
-			PCIX1_CFGA,
-			PCIX1_CFGD,
-			PCIX1_IO_BASE);
-
-	hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno);
-
-	/* Setup PCIX2 */
-	hose2->first_busno = hose1->last_busno + 1;
-	hose2->last_busno = 0xff;
-
-	luan_setup_hose(hose2,
-			LUAN_PCIX2_LOWER_MEM,
-			LUAN_PCIX2_UPPER_MEM,
-			PCIX2_CFGA,
-			PCIX2_CFGD,
-			PCIX2_IO_BASE);
-
-	hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = luan_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-luan_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440SP_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SP_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SP_UART2_ADDR, 8);
-	port.irq = UART2_INT;
-	port.uartclk = BASE_BAUD;
-	port.line = 2;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 2 failed\n");
-	}
-}
-
-static void __init
-luan_setup_arch(void)
-{
-	luan_set_emacdata();
-
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-        mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
-#endif
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	/* 440GX and 440SP clocking is the same -mdp */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCIXn host bridges */
-	luan_setup_hoses();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	luan_early_serial_map();
-
-	/* Identify the system */
-	printk("Luan port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = luan_setup_arch;
-	ppc_md.show_cpuinfo = luan_show_cpuinfo;
-	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = luan_calibrate_decr;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = luan_early_serial_map;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/luan.h b/arch/ppc/platforms/4xx/luan.h
deleted file mode 100644
index 68dd46b0a5c4..000000000000
--- a/arch/ppc/platforms/4xx/luan.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Luan board definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_LUAN_H__
-#define __ASM_LUAN_H__
-
-#include <platforms/4xx/ibm440sp.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xa0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE		0xffe00000
-#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
-
-/* External timer clock frequency */
-#define LUAN_TMR_CLK		25000000
-
-/* Flash */
-#define LUAN_FPGA_REG_0			0x0000000148300000ULL
-#define LUAN_BOOT_LARGE_FLASH(x)	(x & 0x40)
-#define LUAN_SMALL_FLASH_LOW		0x00000001ff900000ULL
-#define LUAN_SMALL_FLASH_HIGH		0x00000001ffe00000ULL
-#define LUAN_SMALL_FLASH_SIZE		0x100000
-#define LUAN_LARGE_FLASH_LOW		0x00000001ff800000ULL
-#define LUAN_LARGE_FLASH_HIGH		0x00000001ffc00000ULL
-#define LUAN_LARGE_FLASH_SIZE		0x400000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	3
-
-/* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE	0xa0000200
-#define UART1_IO_BASE	0xa0000300
-#define UART2_IO_BASE	0xa0000600
-
-#define BASE_BAUD	11059200
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-
-/* PCI support */
-#define LUAN_PCIX_LOWER_IO	0x00000000
-#define LUAN_PCIX_UPPER_IO	0x0000ffff
-#define LUAN_PCIX0_LOWER_MEM	0x80000000
-#define LUAN_PCIX0_UPPER_MEM	0x9fffffff
-#define LUAN_PCIX1_LOWER_MEM	0xa0000000
-#define LUAN_PCIX1_UPPER_MEM	0xbfffffff
-#define LUAN_PCIX2_LOWER_MEM	0xc0000000
-#define LUAN_PCIX2_UPPER_MEM	0xdfffffff
-
-#define LUAN_PCIX_MEM_SIZE	0x20000000
-#define LUAN_PCIX_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_LUAN_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
deleted file mode 100644
index 308386ef6f77..000000000000
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Ocotea board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2003-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-#include <asm/tlbflush.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-ocotea_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = OCOTEA_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-ocotea_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440GX EVB (Ocotea)\n");
-	ibm440gx_show_cpuinfo(m);
-	return 0;
-}
-
-static inline int
-ocotea_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 23, 23, 23 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 24, 24, 24 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 25, 25, 25, 25 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 26, 26, 26, 26 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init ocotea_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	int i;
-
-	/*
-	 * Note: Current rev. board only operates in Group 4a
-	 * mode, so we always set EMAC0-1 for SMII and EMAC2-3
-	 * for RGMII (though these could run in RTBI just the same).
-	 *
-	 * The FPGA reg 3 information isn't even suitable for
-	 * determining the phy_mode, so if the board becomes
-	 * usable in !4a, it will be necessary to parse an environment
-	 * variable from the firmware or similar to properly configure
-	 * the phy_map/phy_mode.
-	 */
-	/* Set phy_map, phy_mode, and mac_addr for each EMAC */
-	for (i=0; i<4; i++) {
-		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-		emacdata = def->additions;
-		if (i < 2) {
-			emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_SMII;
-		}
-		else {
-			emacdata->phy_map = 0x0000ffff; /* Skip 0x00-0x0f */
-			emacdata->phy_mode = PHY_MODE_RGMII;
-		}
-		if (i == 0)
-			memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-		else if (i == 1)
-			memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-		else if (i == 2)
-			memcpy(emacdata->mac_addr, __res.bi_enet2addr, 6);
-		else if (i == 3)
-			memcpy(emacdata->mac_addr, __res.bi_enet3addr, 6);
-	}
-}
-
-#define PCIX_READW(offset) \
-	(readw(pcix_reg_base+offset))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, pcix_reg_base+offset))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base+offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-ocotea_setup_pcix(void)
-{
-	void *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-	PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SAH);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-
-	eieio();
-}
-
-static void __init
-ocotea_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	ocotea_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = OCOTEA_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			OCOTEA_PCI_LOWER_IO,
-			OCOTEA_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			OCOTEA_PCI_LOWER_MEM,
-			OCOTEA_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = OCOTEA_PCI_LOWER_IO;
-	hose->io_space.end = OCOTEA_PCI_UPPER_IO;
-	hose->mem_space.start = OCOTEA_PCI_LOWER_MEM;
-	hose->mem_space.end = OCOTEA_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(OCOTEA_PCI_IO_BASE, OCOTEA_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			OCOTEA_PCI_CFGA_PLB32,
-			OCOTEA_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ocotea_map_irq;
-}
-
-
-TODC_ALLOC();
-
-static void __init
-ocotea_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-ocotea_setup_arch(void)
-{
-	ocotea_set_emacdata();
-
-	ibm440gx_tah_enable();
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gx_get_clocks(&clocks, 33300000, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(OCOTEA_RTC_ADDR, OCOTEA_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	ocotea_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	ocotea_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Ocotea port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-static void __init ocotea_init(void)
-{
-	ibm440gx_l2c_setup(&clocks);
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm440gx_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ocotea_setup_arch;
-	ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = ocotea_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = ocotea_early_serial_map;
-#endif
-	ppc_md.init = ocotea_init;
-}
diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h
deleted file mode 100644
index 89730ce2322c..000000000000
--- a/arch/ppc/platforms/4xx/ocotea.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Ocotea board definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2003-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_OCOTEA_H__
-#define __ASM_OCOTEA_H__
-
-#include <platforms/4xx/ibm440gx.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xe0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE		0xfff00000
-#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0xb0500)
-#define PIBS_MAC_SIZE		0x200
-#define PIBS_MAC_OFFSET		0x100
-
-/* External timer clock frequency */
-#define OCOTEA_TMR_CLK	25000000
-
-/* RTC/NVRAM location */
-#define OCOTEA_RTC_ADDR		0x0000000148000000ULL
-#define OCOTEA_RTC_SIZE		0x2000
-
-/* Flash */
-#define OCOTEA_FPGA_REG_0		0x0000000148300000ULL
-#define OCOTEA_BOOT_LARGE_FLASH(x)	(x & 0x40)
-#define OCOTEA_SMALL_FLASH_LOW		0x00000001ff900000ULL
-#define OCOTEA_SMALL_FLASH_HIGH		0x00000001fff00000ULL
-#define OCOTEA_SMALL_FLASH_SIZE		0x100000
-#define OCOTEA_LARGE_FLASH_LOW		0x00000001ff800000ULL
-#define OCOTEA_LARGE_FLASH_HIGH		0x00000001ffc00000ULL
-#define OCOTEA_LARGE_FLASH_SIZE		0x400000
-
-/* FPGA_REG_3 (Ethernet Groups) */
-#define OCOTEA_FPGA_REG_3		0x0000000148300003ULL
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-#if defined(__BOOTER__)
-/* OpenBIOS defined UART mappings, used by bootloader shim */
-#define UART0_IO_BASE	0xE0000200
-#define UART1_IO_BASE	0xE0000300
-#else
-/* head_44x.S created UART mapping, used before early_serial_setup.
- * We cannot use default OpenBIOS UART mappings because they
- * don't work for configurations with more than 512M RAM.    --ebs
- */
-#define UART0_IO_BASE	0xF0000200
-#define UART1_IO_BASE	0xF0000300
-#endif
-
-#define BASE_BAUD	11059200/16
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* PCI support */
-#define OCOTEA_PCI_LOWER_IO	0x00000000
-#define OCOTEA_PCI_UPPER_IO	0x0000ffff
-#define OCOTEA_PCI_LOWER_MEM	0x80000000
-#define OCOTEA_PCI_UPPER_MEM	0xffffefff
-
-#define OCOTEA_PCI_CFGREGS_BASE	0x000000020ec00000ULL
-#define OCOTEA_PCI_CFGA_PLB32	0x0ec00000
-#define OCOTEA_PCI_CFGD_PLB32	0x0ec00004
-
-#define OCOTEA_PCI_IO_BASE	0x0000000208000000ULL
-#define OCOTEA_PCI_IO_SIZE	0x00010000
-#define OCOTEA_PCI_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_OCOTEA_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c
deleted file mode 100644
index 1be5d1c8e266..000000000000
--- a/arch/ppc/platforms/4xx/ppc440spe.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * PPC440SPe I/O descriptions
- *
- * Roland Dreier <rolandd@cisco.com>
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ppc440spe.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ppc440spe_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = -1,           /* No ZMII */
-	.zmii_mux       = -1,           /* No ZMII */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ppc440spe_mal0_def = {
-	.num_tx_chans   = 1,    	/* Number of TX channels */
-	.num_rx_chans   = 1,    	/* Number of RX channels */
-	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 33,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ppc440spe_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ppc440spe_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440SPE_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440SPE_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= PPC440SPE_UART2_ADDR,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x00000004f0000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ppc440spe_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x00000004f0000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ppc440spe_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x00000004f0000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ppc440spe_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x00000004f0000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ppc440spe_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x010f0004,
-	  .ext_irq_mask = 0x00000000,
-	},
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x001f8040,
-	  .ext_irq_mask = 0x00007c30,   /* IRQ6 - IRQ7, IRQ8 - IRQ12 */
-	},
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x00000000,
-	  .ext_irq_mask = 0x000000fc,   /* IRQ0 - IRQ5 */
-	},
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x00000000,
-	  .ext_irq_mask = 0x00000000,
-	},
-};
diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h
deleted file mode 100644
index f1e867c4c9fc..000000000000
--- a/arch/ppc/platforms/4xx/ppc440spe.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PPC440SPe definitions
- *
- * Roland Dreier <rolandd@cisco.com>
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_PPC440SPE_H
-#define __PPC_PLATFORMS_PPC440SPE_H
-
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440SPE_UART0_ADDR	0x00000004f0000200ULL
-#define PPC440SPE_UART1_ADDR	0x00000004f0000300ULL
-#define PPC440SPE_UART2_ADDR	0x00000004f0000600ULL
-#define UART0_INT		0
-#define UART1_INT		1
-#define UART2_INT		37
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_CPU		    0x02000000	/* processor core */
-#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
-				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
-				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
-			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
-#endif /* __PPC_PLATFORMS_PPC440SP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/redwood5.c b/arch/ppc/platforms/4xx/redwood5.c
deleted file mode 100644
index edf4d37d1a52..000000000000
--- a/arch/ppc/platforms/4xx/redwood5.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Support for the IBM redwood5 eval board file
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ppc4xx_pic.h>
-
-/*
- * Define external IRQ senses and polarities.
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC91111_BASE_ADDR,
-		.end	= SMC91111_BASE_ADDR + SMC91111_REG_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= SMC91111_IRQ,
-		.end	= SMC91111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *redwood5_devs[] __initdata = {
-	&smc91x_device,
-};
-
-static int __init
-redwood5_platform_add_devices(void)
-{
-	return platform_add_devices(redwood5_devs, ARRAY_SIZE(redwood5_devs));
-}
-
-void __init
-redwood5_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-#ifdef CONFIG_DEBUG_BRINGUP
-	printk("\n");
-	printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
-	printk("\n");
-	printk("bi_s_version\t %s\n",      bip->bi_s_version);
-	printk("bi_r_version\t %s\n",      bip->bi_r_version);
-	printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,bip->bi_memsize/(1024*1000));
-	printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
-	bip->bi_enetaddr[0], bip->bi_enetaddr[1],
-	bip->bi_enetaddr[2], bip->bi_enetaddr[3],
-	bip->bi_enetaddr[4], bip->bi_enetaddr[5]);
-
-	printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
-	       bip->bi_intfreq, bip->bi_intfreq/ 1000000);
-
-	printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
-		bip->bi_busfreq, bip->bi_busfreq / 1000000 );
-	printk("bi_tbfreq\t 0x%8.8x\t TB freq:\t %dMHz\n",
-	       bip->bi_tbfreq, bip->bi_tbfreq/1000000);
-
-	printk("\n");
-#endif
-	device_initcall(redwood5_platform_add_devices);
-}
-
-void __init
-redwood5_map_io(void)
-{
-	int i;
-
-	ppc4xx_map_io();
-	for (i = 0; i < 16; i++) {
-	 unsigned long v, p;
-
-	/* 0x400x0000 -> 0xe00x0000 */
-	p = 0x40000000 | (i << 16);
-	v = STB04xxx_IO_BASE | (i << 16);
-
-	io_block_mapping(v, p, PAGE_SIZE,
-		 _PAGE_NO_CACHE | pgprot_val(PAGE_KERNEL) | _PAGE_GUARDED);
-	}
-
-
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = redwood5_setup_arch;
-	ppc_md.setup_io_mappings = redwood5_map_io;
-}
diff --git a/arch/ppc/platforms/4xx/redwood5.h b/arch/ppc/platforms/4xx/redwood5.h
deleted file mode 100644
index 49edd4818970..000000000000
--- a/arch/ppc/platforms/4xx/redwood5.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * STB03xxx "Redwood" evaluation board.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_REDWOOD5_H__
-#define __ASM_REDWOOD5_H__
-
-/* Redwood5 has an STB04xxx core */
-#include <platforms/4xx/ibmstb4.h>
-
-#ifndef __ASSEMBLY__
-typedef struct board_info {
-	unsigned char	bi_s_version[4];	/* Version of this structure */
-	unsigned char	bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int	bi_memsize;		/* DRAM installed, in bytes */
-	unsigned int	bi_dummy;		/* field shouldn't exist */
-	unsigned char	bi_enetaddr[6];		/* Ethernet MAC address */
-	unsigned int	bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	bi_busfreq;		/* Bus speed, in Hz */
-	unsigned int	bi_tbfreq;		/* Software timebase freq */
-} bd_t;
-#endif /* !__ASSEMBLY__ */
-
-
-#define SMC91111_BASE_ADDR	0xf2000300
-#define SMC91111_REG_SIZE	16
-#define SMC91111_IRQ		28
-
-#ifdef MAX_HWIFS
-#undef MAX_HWIFS
-#endif
-#define MAX_HWIFS		1
-
-#define _IO_BASE	0
-#define _ISA_MEM_BASE	0
-#define PCI_DRAM_OFFSET	0
-
-#define BASE_BAUD		(378000000 / 18 / 16)
-
-#define PPC4xx_MACHINE_NAME	"IBM Redwood5"
-
-#endif /* __ASM_REDWOOD5_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/redwood6.c b/arch/ppc/platforms/4xx/redwood6.c
deleted file mode 100644
index 006e29f83a1a..000000000000
--- a/arch/ppc/platforms/4xx/redwood6.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <asm/ppc4xx_pic.h>
-#include <linux/delay.h>
-#include <asm/machdep.h>
-
-/*
- * Define external IRQ senses and polarities.
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 6 */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC91111_BASE_ADDR,
-		.end	= SMC91111_BASE_ADDR + SMC91111_REG_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= SMC91111_IRQ,
-		.end	= SMC91111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *redwood6_devs[] __initdata = {
-	&smc91x_device,
-};
-
-static int __init
-redwood6_platform_add_devices(void)
-{
-	return platform_add_devices(redwood6_devs, ARRAY_SIZE(redwood6_devs));
-}
-
-
-void __init
-redwood6_setup_arch(void)
-{
-#ifdef CONFIG_IDE
-	void *xilinx, *xilinx_1, *xilinx_2;
-	unsigned short us_reg5;
-#endif
-
-	ppc4xx_setup_arch();
-
-#ifdef CONFIG_IDE
-	xilinx = (unsigned long) ioremap(IDE_XLINUX_MUX_BASE, 0x10);
-	/* init xilinx control registers - enable ide mux, clear reset bit */
-	if (!xilinx) {
-		printk(KERN_CRIT
-		       "redwood6_setup_arch() xilinxi ioremap failed\n");
-		return;
-	}
-	xilinx_1 = xilinx + 0xa;
-	xilinx_2 = xilinx + 0xe;
-
-	us_reg5 = readb(xilinx_1);
-	writeb(0x01d1, xilinx_1);
-	writeb(0x0008, xilinx_2);
-
-	udelay(10 * 1000);
-
-	writeb(0x01d1, xilinx_1);
-	writeb(0x0008, xilinx_2);
-#endif
-
-#ifdef DEBUG_BRINGUP
-	bd_t *bip = (bd_t *) __res;
-	printk("\n");
-	printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
-	printk("\n");
-	printk("bi_s_version\t %s\n", bip->bi_s_version);
-	printk("bi_r_version\t %s\n", bip->bi_r_version);
-	printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
-	       bip->bi_memsize / (1024 * 1000));
-	printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
-	       bip->bi_enetaddr[0], bip->bi_enetaddr[1], bip->bi_enetaddr[2],
-	       bip->bi_enetaddr[3], bip->bi_enetaddr[4], bip->bi_enetaddr[5]);
-
-	printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
-	       bip->bi_intfreq, bip->bi_intfreq / 1000000);
-
-	printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
-	       bip->bi_busfreq, bip->bi_busfreq / 1000000);
-	printk("bi_tbfreq\t 0x%8.8x\t TB freq:\t %dMHz\n",
-	       bip->bi_tbfreq, bip->bi_tbfreq / 1000000);
-
-	printk("\n");
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "IBM Redwood6 (STBx25XX) Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-	device_initcall(redwood6_platform_add_devices);
-}
-
-void __init
-redwood6_map_io(void)
-{
-	int i;
-
-	ppc4xx_map_io();
-	for (i = 0; i < 16; i++) {
-		unsigned long v, p;
-
-		/* 0x400x0000 -> 0xe00x0000 */
-		p = 0x40000000 | (i << 16);
-		v = STBx25xx_IO_BASE | (i << 16);
-
-		io_block_mapping(v, p, PAGE_SIZE,
-				 _PAGE_NO_CACHE | pgprot_val(PAGE_KERNEL) |
-				 _PAGE_GUARDED);
-	}
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = redwood6_setup_arch;
-	ppc_md.setup_io_mappings = redwood6_map_io;
-}
diff --git a/arch/ppc/platforms/4xx/redwood6.h b/arch/ppc/platforms/4xx/redwood6.h
deleted file mode 100644
index 1edcbe5c51c7..000000000000
--- a/arch/ppc/platforms/4xx/redwood6.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * STBx25xx "Redwood6" evaluation board.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_REDWOOD5_H__
-#define __ASM_REDWOOD5_H__
-
-/* Redwood6 has an STBx25xx core */
-#include <platforms/4xx/ibmstbx25.h>
-
-#ifndef __ASSEMBLY__
-typedef struct board_info {
-	unsigned char bi_s_version[4];	/* Version of this structure */
-	unsigned char bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int bi_memsize;	/* DRAM installed, in bytes */
-	unsigned int bi_dummy;	/* field shouldn't exist */
-	unsigned char bi_enetaddr[6];	/* Ethernet MAC address */
-	unsigned int bi_intfreq;	/* Processor speed, in Hz */
-	unsigned int bi_busfreq;	/* Bus speed, in Hz */
-	unsigned int bi_tbfreq;	/* Software timebase freq */
-} bd_t;
-#endif				/* !__ASSEMBLY__ */
-
-#define SMC91111_BASE_ADDR	0xf2030300
-#define SMC91111_REG_SIZE	16
-#define SMC91111_IRQ		27
-#define IDE_XLINUX_MUX_BASE        0xf2040000
-#define IDE_DMA_ADDR	0xfce00000
-
-#ifdef MAX_HWIFS
-#undef MAX_HWIFS
-#endif
-#define MAX_HWIFS		1
-
-#define _IO_BASE	0
-#define _ISA_MEM_BASE	0
-#define PCI_DRAM_OFFSET	0
-
-#define BASE_BAUD		(378000000 / 18 / 16)
-
-#define PPC4xx_MACHINE_NAME	"IBM Redwood6"
-
-#endif				/* __ASM_REDWOOD5_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c
deleted file mode 100644
index 8689f3e8ef3a..000000000000
--- a/arch/ppc/platforms/4xx/sycamore.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/ibm_ocp_pci.h>
-#include <asm/todc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-void *kb_cs;
-void *kb_data;
-void *sycamore_rtc_base;
-
-/*
- * Define external IRQ senses and polarities.
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 10 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 11 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 12 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 6 */
-};
-
-
-/* Some IRQs unique to Sycamore.
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *      A       B       C       D
-	     */
-	{
-		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-void __init
-sycamore_setup_arch(void)
-{
-	void *fpga_brdc;
-	unsigned char fpga_brdc_data;
-	void *fpga_enable;
-	void *fpga_polarity;
-	void *fpga_status;
-	void *fpga_trigger;
-
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-	kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
-	if (!kb_data) {
-		printk(KERN_CRIT
-		       "sycamore_setup_arch() kb_data ioremap failed\n");
-		return;
-	}
-
-	kb_cs = kb_data + 1;
-
-	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
-	if (!fpga_status) {
-		printk(KERN_CRIT
-		       "sycamore_setup_arch() fpga_status ioremap failed\n");
-		return;
-	}
-
-	fpga_enable = fpga_status + 1;
-	fpga_polarity = fpga_status + 2;
-	fpga_trigger = fpga_status + 3;
-	fpga_brdc = fpga_status + 4;
-
-	/* split the keyboard and mouse interrupts */
-	fpga_brdc_data = readb(fpga_brdc);
-	fpga_brdc_data |= 0x80;
-	writeb(fpga_brdc_data, fpga_brdc);
-
-	writeb(0x3, fpga_enable);
-
-	writeb(0x3, fpga_polarity);
-
-	writeb(0x3, fpga_trigger);
-
-	/* RTC step for the sycamore */
-	sycamore_rtc_base = (void *) SYCAMORE_RTC_VADDR;
-	TODC_INIT(TODC_TYPE_DS1743, sycamore_rtc_base, sycamore_rtc_base,
-		  sycamore_rtc_base, 8);
-
-	/* Identify the system */
-	printk(KERN_INFO "IBM Sycamore (IBM405GPr) Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 * The following code is simplified by assuming that the bootrom
-	 * has been well behaved in following this mapping.
-	 */
-
-#ifdef DEBUG
-	int i;
-
-	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-	printk("PCI bridge regs before fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
-	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Enable inbound region one - 1GB size */
-	out_le32((void *) &(pcip->ptm1ms), 0xc0000001);
-
-	/* Disable outbound region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-
-	/* Disable inbound region two */
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Disable outbound region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end workaround */
-
-#ifdef DEBUG
-	printk("PCI bridge regs after fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-
-}
-
-void __init
-sycamore_map_io(void)
-{
-	ppc4xx_map_io();
-	io_block_mapping(SYCAMORE_RTC_VADDR,
-			 SYCAMORE_RTC_PADDR, SYCAMORE_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = sycamore_setup_arch;
-	ppc_md.setup_io_mappings = sycamore_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h
deleted file mode 100644
index 69b169eac053..000000000000
--- a/arch/ppc/platforms/4xx/sycamore.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Sycamore board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- * 	Armin Kuster <akuster@mvista.com>
- *	2000 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_SYCAMORE_H__
-#define __ASM_SYCAMORE_H__
-
-#include <platforms/4xx/ibm405gpr.h>
-#include <asm/ppcboot.h>
-
-/* Memory map for the IBM "Sycamore" 405GPr evaluation board.
- * Generic 4xx plus RTC.
- */
-
-#define SYCAMORE_RTC_PADDR	((uint)0xf0000000)
-#define SYCAMORE_RTC_VADDR	SYCAMORE_RTC_PADDR
-#define SYCAMORE_RTC_SIZE	((uint)8*1024)
-
-#define BASE_BAUD		691200
-
-#define SYCAMORE_PS2_BASE	0xF0100000
-
-/* Flash */
-#define PPC40x_FPGA_BASE	0xF0300000
-#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
-#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-#define PPC40x_FLASH_LOW	0xFFF00000
-#define PPC40x_FLASH_HIGH	0xFFF80000
-#define PPC40x_FLASH_SIZE	0x80000
-
-#define PPC4xx_MACHINE_NAME	"IBM Sycamore"
-
-#endif /* __ASM_SYCAMORE_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
deleted file mode 100644
index 115694275083..000000000000
--- a/arch/ppc/platforms/4xx/taishan.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/taishan.c
- *
- * AMCC Taishan board specific routines
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/ndfc.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-/*
- * NOR FLASH configuration (using mtd physmap driver)
- */
-
-/* start will be added dynamically, end is always fixed */
-static struct resource taishan_nor_resource = {
-	.start = TAISHAN_FLASH_ADDR,
-	.end   = 0x1ffffffffULL,
-	.flags = IORESOURCE_MEM,
-};
-
-#define RW_PART0_OF	0
-#define RW_PART0_SZ	0x180000
-#define RW_PART1_SZ	0x200000
-/* Partition 2 will be autosized dynamically... */
-#define RW_PART3_SZ	0x80000
-#define RW_PART4_SZ	0x40000
-
-static struct mtd_partition taishan_nor_parts[] = {
-	{
-		.name = "kernel",
-		.offset = 0,
-		.size = RW_PART0_SZ
-	},
-	{
-		.name = "root",
-		.offset = MTDPART_OFS_APPEND,
-		.size = RW_PART1_SZ,
-	},
-	{
-		.name = "user",
-		.offset = MTDPART_OFS_APPEND,
-/*		.size = RW_PART2_SZ */ /* will be adjusted dynamically */
-	},
-	{
-		.name = "env",
-		.offset = MTDPART_OFS_APPEND,
-		.size = RW_PART3_SZ,
-	},
-	{
-		.name = "u-boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = RW_PART4_SZ,
-	}
-};
-
-static struct physmap_flash_data taishan_nor_data = {
-	.width		= 4,
-	.parts		= taishan_nor_parts,
-	.nr_parts	= ARRAY_SIZE(taishan_nor_parts),
-};
-
-static struct platform_device taishan_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &taishan_nor_data,
-		},
-	.num_resources	= 1,
-	.resource	= &taishan_nor_resource,
-};
-
-static int taishan_setup_flash(void)
-{
-	/*
-	 * Adjust partition 2 to flash size
-	 */
-	taishan_nor_parts[2].size = __res.bi_flashsize -
-		RW_PART0_SZ - RW_PART1_SZ - RW_PART3_SZ - RW_PART4_SZ;
-
-	platform_device_register(&taishan_nor_device);
-
-	return 0;
-}
-arch_initcall(taishan_setup_flash);
-
-static void __init
-taishan_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = TAISHAN_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-taishan_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: AMCC\n");
-	seq_printf(m, "machine\t\t: PPC440GX EVB (Taishan)\n");
-	ibm440gx_show_cpuinfo(m);
-	return 0;
-}
-
-static inline int
-taishan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 24, 25, 26 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 25, 26, 23 },	/* IDSEL 2 - PCI Slot 1 */
-	};
-
-	const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init taishan_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	int i;
-
-	/* Set phy_map, phy_mode, and mac_addr for each EMAC */
-	for (i=2; i<4; i++) {
-		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-		emacdata = def->additions;
-		if (i < 2) {
-			emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_SMII;
-		} else {
-			emacdata->phy_map = 0x00000001; /* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_RGMII;
-		}
-		if (i == 0)
-			memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
-		else if (i == 1)
-			memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
-		else if (i == 2)
-			memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-		else if (i == 3)
-			memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-	}
-}
-
-#define PCIX_READW(offset) \
-	(readw(pcix_reg_base+offset))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, pcix_reg_base+offset))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base+offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-taishan_setup_pcix(void)
-{
-	void *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-	PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SAH);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-	PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
-
-	iounmap(pcix_reg_base);
-
-	eieio();
-}
-
-static void __init
-taishan_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	taishan_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = TAISHAN_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			TAISHAN_PCI_LOWER_IO,
-			TAISHAN_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			TAISHAN_PCI_LOWER_MEM,
-			TAISHAN_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = TAISHAN_PCI_LOWER_IO;
-	hose->io_space.end = TAISHAN_PCI_UPPER_IO;
-	hose->mem_space.start = TAISHAN_PCI_LOWER_MEM;
-	hose->mem_space.end = TAISHAN_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(TAISHAN_PCI_IO_BASE, TAISHAN_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			TAISHAN_PCI_CFGA_PLB32,
-			TAISHAN_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = taishan_map_irq;
-}
-
-
-static void __init
-taishan_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 0 failed\n");
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 1 failed\n");
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-taishan_setup_arch(void)
-{
-	taishan_set_emacdata();
-
-	ibm440gx_tah_enable();
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	taishan_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	taishan_early_serial_map();
-
-	/* Identify the system */
-	printk("AMCC PowerPC 440GX Taishan Platform\n");
-}
-
-static void __init taishan_init(void)
-{
-	ibm440gx_l2c_setup(&clocks);
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = taishan_setup_arch;
-	ppc_md.show_cpuinfo = taishan_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = taishan_calibrate_decr;
-
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = taishan_early_serial_map;
-#endif
-	ppc_md.init = taishan_init;
-}
-
diff --git a/arch/ppc/platforms/4xx/taishan.h b/arch/ppc/platforms/4xx/taishan.h
deleted file mode 100644
index ea7561a80457..000000000000
--- a/arch/ppc/platforms/4xx/taishan.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/taishan.h
- *
- * AMCC Taishan board definitions
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_TAISHAN_H__
-#define __ASM_TAISHAN_H__
-
-#include <platforms/4xx/ibm440gx.h>
-
-/* External timer clock frequency */
-#define TAISHAN_TMR_CLK	25000000
-
-/* Flash */
-#define TAISHAN_FPGA_ADDR		0x0000000141000000ULL
-#define TAISHAN_LCM_ADDR		0x0000000142000000ULL
-#define TAISHAN_FLASH_ADDR		0x00000001fc000000ULL
-#define TAISHAN_FLASH_SIZE		0x4000000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-/* head_44x.S created UART mapping, used before early_serial_setup.
- * We cannot use default OpenBIOS UART mappings because they
- * don't work for configurations with more than 512M RAM.    --ebs
- */
-#define UART0_IO_BASE	0xF0000200
-#define UART1_IO_BASE	0xF0000300
-
-#define BASE_BAUD	11059200/16
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* PCI support */
-#define TAISHAN_PCI_LOWER_IO	0x00000000
-#define TAISHAN_PCI_UPPER_IO	0x0000ffff
-#define TAISHAN_PCI_LOWER_MEM	0x80000000
-#define TAISHAN_PCI_UPPER_MEM	0xffffefff
-
-#define TAISHAN_PCI_CFGA_PLB32	0x0ec00000
-#define TAISHAN_PCI_CFGD_PLB32	0x0ec00004
-
-#define TAISHAN_PCI_IO_BASE	0x0000000208000000ULL
-#define TAISHAN_PCI_IO_SIZE	0x00010000
-#define TAISHAN_PCI_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_TAISHAN_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
deleted file mode 100644
index 738280420be5..000000000000
--- a/arch/ppc/platforms/4xx/virtex.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Basic Virtex platform defines, included by <asm/ibm4xx.h>
- *
- * 2005-2007 (c) Secret Lab Technologies Ltd.
- * 2002-2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_VIRTEX_H__
-#define __ASM_VIRTEX_H__
-
-#include <asm/ibm405.h>
-#include <asm/ppcboot.h>
-
-/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */
-#if !defined(BASE_BAUD)
- #define BASE_BAUD		(0) /* dummy value; not used */
-#endif
-
-#ifndef __ASSEMBLY__
-extern const char* virtex_machine_name;
-#define PPC4xx_MACHINE_NAME (virtex_machine_name)
-#endif /* !__ASSEMBLY__ */
-
-/* We don't need anything mapped.  Size of zero will accomplish that. */
-#define PPC4xx_ONB_IO_PADDR	0u
-#define PPC4xx_ONB_IO_VADDR	0u
-#define PPC4xx_ONB_IO_SIZE	0u
-
-#endif				/* __ASM_VIRTEX_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c
deleted file mode 100644
index 2f9772340854..000000000000
--- a/arch/ppc/platforms/4xx/walnut.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
- * <dan@net4x.com>.
- *
- * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-#include <asm/todc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-void *kb_cs;
-void *kb_data;
-void *walnut_rtc_base;
-
-/* Some IRQs unique to Walnut.
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *      A       B       C       D
-	     */
-	{
-		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-void __init
-walnut_setup_arch(void)
-{
-
-	void *fpga_brdc;
-	unsigned char fpga_brdc_data;
-	void *fpga_enable;
-	void *fpga_polarity;
-	void *fpga_status;
-	void *fpga_trigger;
-
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-	kb_data = ioremap(WALNUT_PS2_BASE, 8);
-	if (!kb_data) {
-		printk(KERN_CRIT
-		       "walnut_setup_arch() kb_data ioremap failed\n");
-		return;
-	}
-
-	kb_cs = kb_data + 1;
-
-	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
-	if (!fpga_status) {
-		printk(KERN_CRIT
-		       "walnut_setup_arch() fpga_status ioremap failed\n");
-		return;
-	}
-
-	fpga_enable = fpga_status + 1;
-	fpga_polarity = fpga_status + 2;
-	fpga_trigger = fpga_status + 3;
-	fpga_brdc = fpga_status + 4;
-
-	/* split the keyboard and mouse interrupts */
-	fpga_brdc_data = readb(fpga_brdc);
-	fpga_brdc_data |= 0x80;
-	writeb(fpga_brdc_data, fpga_brdc);
-
-	writeb(0x3, fpga_enable);
-
-	writeb(0x3, fpga_polarity);
-
-	writeb(0x3, fpga_trigger);
-
-	/* RTC step for the walnut */
-	walnut_rtc_base = (void *) WALNUT_RTC_VADDR;
-	TODC_INIT(TODC_TYPE_DS1743, walnut_rtc_base, walnut_rtc_base,
-		  walnut_rtc_base, 8);
-	/* Identify the system */
-	printk("IBM Walnut port (C) 2000-2002 MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 * The following code is simplified by assuming that the bootrom
-	 * has been well behaved in following this mapping.
-	 */
-
-#ifdef DEBUG
-	int i;
-
-	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-	printk("PCI bridge regs before fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
-	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000000);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end work around */
-
-#ifdef DEBUG
-	printk("PCI bridge regs after fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-}
-
-void __init
-walnut_map_io(void)
-{
-	ppc4xx_map_io();
-	io_block_mapping(WALNUT_RTC_VADDR,
-			 WALNUT_RTC_PADDR, WALNUT_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = walnut_setup_arch;
-	ppc_md.setup_io_mappings = walnut_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h
deleted file mode 100644
index d9c4eb788940..000000000000
--- a/arch/ppc/platforms/4xx/walnut.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Walnut board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- * 	Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *	Frank Rowand <frank_rowand@mvista.com>
- *	Debbie Chu <debbie_chu@mvista.com>
- *	2000 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_WALNUT_H__
-#define __ASM_WALNUT_H__
-
-#include <platforms/4xx/ibm405gp.h>
-#include <asm/ppcboot.h>
-
-/* Memory map for the IBM "Walnut" 405GP evaluation board.
- * Generic 4xx plus RTC.
- */
-
-#define WALNUT_RTC_PADDR	((uint)0xf0000000)
-#define WALNUT_RTC_VADDR	WALNUT_RTC_PADDR
-#define WALNUT_RTC_SIZE		((uint)8*1024)
-
-#define BASE_BAUD		691200
-
-#define WALNUT_PS2_BASE		0xF0100000
-
-/* Flash */
-#define PPC40x_FPGA_BASE	0xF0300000
-#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
-#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-#define PPC40x_FLASH_LOW	0xFFF00000
-#define PPC40x_FLASH_HIGH	0xFFF80000
-#define PPC40x_FLASH_SIZE	0x80000
-#define WALNUT_FPGA_BASE	PPC40x_FPGA_BASE
-
-#define PPC4xx_MACHINE_NAME	"IBM Walnut"
-
-#endif /* __ASM_WALNUT_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
deleted file mode 100644
index 6e522fefc26f..000000000000
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Xilinx ML300 evaluation board initialization
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/serialP.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-
-#include <syslib/gen550.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-/*
- * As an overview of how the following functions (platform_init,
- * ml300_map_io, ml300_setup_arch and ml300_init_IRQ) fit into the
- * kernel startup procedure, here's a call tree:
- *
- * start_here					arch/ppc/kernel/head_4xx.S
- *  early_init					arch/ppc/kernel/setup.c
- *  machine_init				arch/ppc/kernel/setup.c
- *    platform_init				this file
- *      ppc4xx_init				arch/ppc/syslib/ppc4xx_setup.c
- *        parse_bootinfo
- *          find_bootinfo
- *        "setup some default ppc_md pointers"
- *  MMU_init					arch/ppc/mm/init.c
- *    *ppc_md.setup_io_mappings == ml300_map_io	this file
- *      ppc4xx_map_io				arch/ppc/syslib/ppc4xx_setup.c
- *  start_kernel				init/main.c
- *    setup_arch				arch/ppc/kernel/setup.c
- * #if defined(CONFIG_KGDB)
- *      *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
- * #endif
- *      *ppc_md.setup_arch == ml300_setup_arch	this file
- *        ppc4xx_setup_arch			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_find_bridges			arch/ppc/syslib/ppc405_pci.c
- *    init_IRQ					arch/ppc/kernel/irq.c
- *      *ppc_md.init_IRQ == ml300_init_IRQ	this file
- *        ppc4xx_init_IRQ			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
- */
-
-const char* virtex_machine_name = "ML300 Reference Design";
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-static volatile unsigned *powerdown_base =
-    (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
-
-static void
-xilinx_power_off(void)
-{
-	local_irq_disable();
-	out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
-	while (1) ;
-}
-#endif
-
-void __init
-ml300_map_io(void)
-{
-	ppc4xx_map_io();
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	powerdown_base = ioremap((unsigned long) powerdown_base,
-				 XPAR_POWER_0_POWERDOWN_HIGHADDR -
-				 XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
-#endif
-}
-
-void __init
-ml300_setup_arch(void)
-{
-	virtex_early_serial_map();
-	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
-
-	/* Identify the system */
-	printk(KERN_INFO "Xilinx ML300 Reference System (Virtex-II Pro)\n");
-}
-
-/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
-void __init
-ml300_init_irq(void)
-{
-	ppc4xx_init_IRQ();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ml300_setup_arch;
-	ppc_md.setup_io_mappings = ml300_map_io;
-	ppc_md.init_IRQ = ml300_init_irq;
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	ppc_md.power_off = xilinx_power_off;
-#endif
-
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = virtex_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.c b/arch/ppc/platforms/4xx/xilinx_ml403.c
deleted file mode 100644
index bc3ace3762e7..000000000000
--- a/arch/ppc/platforms/4xx/xilinx_ml403.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Xilinx ML403 evaluation board initialization
- *
- * Author: Grant Likely <grant.likely@secretlab.ca>
- *
- * 2005-2007 (c) Secret Lab Technologies Ltd.
- * 2002-2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/serialP.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-
-#include <syslib/gen550.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-/*
- * As an overview of how the following functions (platform_init,
- * ml403_map_io, ml403_setup_arch and ml403_init_IRQ) fit into the
- * kernel startup procedure, here's a call tree:
- *
- * start_here					arch/ppc/kernel/head_4xx.S
- *  early_init					arch/ppc/kernel/setup.c
- *  machine_init				arch/ppc/kernel/setup.c
- *    platform_init				this file
- *      ppc4xx_init				arch/ppc/syslib/ppc4xx_setup.c
- *        parse_bootinfo
- *          find_bootinfo
- *        "setup some default ppc_md pointers"
- *  MMU_init					arch/ppc/mm/init.c
- *    *ppc_md.setup_io_mappings == ml403_map_io	this file
- *      ppc4xx_map_io				arch/ppc/syslib/ppc4xx_setup.c
- *  start_kernel				init/main.c
- *    setup_arch				arch/ppc/kernel/setup.c
- * #if defined(CONFIG_KGDB)
- *      *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
- * #endif
- *      *ppc_md.setup_arch == ml403_setup_arch	this file
- *        ppc4xx_setup_arch			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_find_bridges			arch/ppc/syslib/ppc405_pci.c
- *    init_IRQ					arch/ppc/kernel/irq.c
- *      *ppc_md.init_IRQ == ml403_init_IRQ	this file
- *        ppc4xx_init_IRQ			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
- */
-
-const char* virtex_machine_name = "ML403 Reference Design";
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-static volatile unsigned *powerdown_base =
-    (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
-
-static void
-xilinx_power_off(void)
-{
-	local_irq_disable();
-	out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
-	while (1) ;
-}
-#endif
-
-void __init
-ml403_map_io(void)
-{
-	ppc4xx_map_io();
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	powerdown_base = ioremap((unsigned long) powerdown_base,
-				 XPAR_POWER_0_POWERDOWN_HIGHADDR -
-				 XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
-#endif
-}
-
-void __init
-ml403_setup_arch(void)
-{
-	virtex_early_serial_map();
-	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
-
-	/* Identify the system */
-	printk(KERN_INFO "Xilinx ML403 Reference System (Virtex-4 FX)\n");
-}
-
-/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
-void __init
-ml403_init_irq(void)
-{
-	ppc4xx_init_IRQ();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ml403_setup_arch;
-	ppc_md.setup_io_mappings = ml403_map_io;
-	ppc_md.init_IRQ = ml403_init_irq;
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	ppc_md.power_off = xilinx_power_off;
-#endif
-
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = virtex_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
deleted file mode 100644
index 650888b00fb0..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/xparameters/xparameters.h
- *
- * This file includes the correct xparameters.h for the CONFIG'ed board plus
- * fixups to translate board specific XPAR values to a common set of names
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2004 (c) MontaVista Software, Inc.  This file is licensed under the terms
- * of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-
-#if defined(CONFIG_XILINX_ML300)
-  #include "xparameters_ml300.h"
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
-	XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
-	XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
-#elif defined(CONFIG_XILINX_ML403)
-  #include "xparameters_ml403.h"
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
-	XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
-	XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
-#else
-  /* Add other board xparameter includes here before the #else */
-  #error No xparameters_*.h file included
-#endif
-
-#ifndef SERIAL_PORT_DFNS
-  /* zImage serial port definitions */
-  #define RS_TABLE_SIZE 1
-  #define SERIAL_PORT_DFNS {						\
-	.baud_base	 = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16,		\
-	.irq		 = XPAR_INTC_0_UARTNS550_0_VEC_ID,		\
-	.flags		 = ASYNC_BOOT_AUTOCONF,				\
-	.iomem_base	 = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3,		\
-	.iomem_reg_shift = 2,						\
-	.io_type	 = SERIAL_IO_MEM,				\
-  },
-#endif
-
-/*
- * A few reasonable defaults for the #defines which could be missing depending
- * on the IP version or variant (e.g. OPB vs PLB)
- */
-
-#ifndef XPAR_EMAC_0_CAM_EXIST
-#define XPAR_EMAC_0_CAM_EXIST 0
-#endif
-#ifndef XPAR_EMAC_0_JUMBO_EXIST
-#define XPAR_EMAC_0_JUMBO_EXIST 0
-#endif
-#ifndef XPAR_EMAC_0_TX_DRE_TYPE
-#define XPAR_EMAC_0_TX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_0_RX_DRE_TYPE
-#define XPAR_EMAC_0_RX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_0_TX_INCLUDE_CSUM
-#define XPAR_EMAC_0_TX_INCLUDE_CSUM 0
-#endif
-#ifndef XPAR_EMAC_0_RX_INCLUDE_CSUM
-#define XPAR_EMAC_0_RX_INCLUDE_CSUM 0
-#endif
-
-#ifndef XPAR_EMAC_1_CAM_EXIST
-#define XPAR_EMAC_1_CAM_EXIST 0
-#endif
-#ifndef XPAR_EMAC_1_JUMBO_EXIST
-#define XPAR_EMAC_1_JUMBO_EXIST 0
-#endif
-#ifndef XPAR_EMAC_1_TX_DRE_TYPE
-#define XPAR_EMAC_1_TX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_1_RX_DRE_TYPE
-#define XPAR_EMAC_1_RX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_1_TX_INCLUDE_CSUM
-#define XPAR_EMAC_1_TX_INCLUDE_CSUM 0
-#endif
-#ifndef XPAR_EMAC_1_RX_INCLUDE_CSUM
-#define XPAR_EMAC_1_RX_INCLUDE_CSUM 0
-#endif
-
-#ifndef XPAR_GPIO_0_IS_DUAL
-#define XPAR_GPIO_0_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_1_IS_DUAL
-#define XPAR_GPIO_1_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_2_IS_DUAL
-#define XPAR_GPIO_2_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_3_IS_DUAL
-#define XPAR_GPIO_3_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_4_IS_DUAL
-#define XPAR_GPIO_4_IS_DUAL 0
-#endif
-
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h
deleted file mode 100644
index 97e3f4d4bd54..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*******************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* Description: Driver parameters
-*
-*******************************************************************/
-
-#define XPAR_XPCI_NUM_INSTANCES 1
-#define XPAR_XPCI_CLOCK_HZ 33333333
-#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
-#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF
-#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000
-#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004
-#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000
-#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF
-#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000
-#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
-
-/******************************************************************/
-
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7)
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8)
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F)
-#define XPAR_XGPIO_NUM_INSTANCES 2
-
-/******************************************************************/
-
-#define XPAR_XIIC_NUM_INSTANCES 1
-#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
-#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
-#define XPAR_OPB_IIC_0_DEVICE_ID 0
-#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
-
-/******************************************************************/
-
-#define XPAR_XUARTNS550_NUM_INSTANCES 2
-#define XPAR_XUARTNS550_CLOCK_HZ 100000000
-#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
-#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
-#define XPAR_OPB_UART16550_0_DEVICE_ID 0
-#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000
-#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF
-#define XPAR_OPB_UART16550_1_DEVICE_ID 1
-
-/******************************************************************/
-
-#define XPAR_XSPI_NUM_INSTANCES 1
-#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
-#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
-#define XPAR_OPB_SPI_0_DEVICE_ID 0
-#define XPAR_OPB_SPI_0_FIFO_EXIST 1
-#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
-#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
-
-/******************************************************************/
-
-#define XPAR_XPS2_NUM_INSTANCES 2
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
-
-/******************************************************************/
-
-#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1
-#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000
-#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007
-#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
-#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000
-#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF
-#define XPAR_PLB_DDR_0_BASEADDR 0x00000000
-#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XINTC_HAS_IPR 1
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18
-#define XPAR_XINTC_USE_DCR 0
-#define XPAR_XINTC_NUM_INSTANCES 1
-#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0
-#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF
-#define XPAR_DCR_INTC_0_DEVICE_ID 0
-#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000
-
-/******************************************************************/
-
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0
-#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3
-#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4
-#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5
-#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6
-#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9
-#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10
-#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13
-#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14
-#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15
-#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16
-#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17
-
-/******************************************************************/
-
-#define XPAR_XTFT_NUM_INSTANCES 1
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
-#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XSYSACE_MEM_WIDTH 8
-#define XPAR_XSYSACE_NUM_INSTANCES 1
-#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
-#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
-#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
-#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
-
-/******************************************************************/
-
-#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
-
-/******************************************************************/
-
-/******************************************************************/
-
-/* Linux Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
-#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
-#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_GPIO_0_BASEADDR XPAR_MY_OPB_GPIO_0_BASEADDR_0
-#define XPAR_GPIO_0_HIGHADDR XPAR_MY_OPB_GPIO_0_HIGHADDR_0
-#define XPAR_GPIO_0_DEVICE_ID XPAR_MY_OPB_GPIO_0_DEVICE_ID_0
-#define XPAR_GPIO_1_BASEADDR XPAR_MY_OPB_GPIO_0_BASEADDR_1
-#define XPAR_GPIO_1_HIGHADDR XPAR_MY_OPB_GPIO_0_HIGHADDR_1
-#define XPAR_GPIO_1_DEVICE_ID XPAR_MY_OPB_GPIO_0_DEVICE_ID_1
-
-/******************************************************************/
-
-#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
-#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
-#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
-#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR
-#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR
-#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_BASEADDR XPAR_DCR_INTC_0_BASEADDR
-#define XPAR_INTC_0_HIGHADDR XPAR_DCR_INTC_0_HIGHADDR
-#define XPAR_INTC_0_KIND_OF_INTR XPAR_DCR_INTC_0_KIND_OF_INTR
-#define XPAR_INTC_0_DEVICE_ID XPAR_DCR_INTC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR
-#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_UARTNS550_1_VEC_ID XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR
-#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR
-#define XPAR_INTC_0_SPI_0_VEC_ID XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_TOUCHSCREEN_0_VEC_ID XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_A XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_B XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_C XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_D XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_SPI_0_BASEADDR XPAR_OPB_SPI_0_BASEADDR
-#define XPAR_SPI_0_HIGHADDR XPAR_OPB_SPI_0_HIGHADDR
-#define XPAR_SPI_0_DEVICE_ID XPAR_OPB_SPI_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_TOUCHSCREEN_0_BASEADDR XPAR_OPB_TSD_REF_0_BASEADDR
-#define XPAR_TOUCHSCREEN_0_HIGHADDR XPAR_OPB_TSD_REF_0_HIGHADDR
-#define XPAR_TOUCHSCREEN_0_DEVICE_ID XPAR_OPB_TSD_REF_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR
-
-/******************************************************************/
-
-#define XPAR_PCI_0_BASEADDR XPAR_OPB_PCI_REF_0_BASEADDR
-#define XPAR_PCI_0_HIGHADDR XPAR_OPB_PCI_REF_0_HIGHADDR
-#define XPAR_PCI_0_CONFIG_ADDR XPAR_OPB_PCI_REF_0_CONFIG_ADDR
-#define XPAR_PCI_0_CONFIG_DATA XPAR_OPB_PCI_REF_0_CONFIG_DATA
-#define XPAR_PCI_0_LCONFIG_ADDR XPAR_OPB_PCI_REF_0_LCONFIG_ADDR
-#define XPAR_PCI_0_MEM_BASEADDR XPAR_OPB_PCI_REF_0_MEM_BASEADDR
-#define XPAR_PCI_0_MEM_HIGHADDR XPAR_OPB_PCI_REF_0_MEM_HIGHADDR
-#define XPAR_PCI_0_IO_BASEADDR XPAR_OPB_PCI_REF_0_IO_BASEADDR
-#define XPAR_PCI_0_IO_HIGHADDR XPAR_OPB_PCI_REF_0_IO_HIGHADDR
-#define XPAR_PCI_0_CLOCK_FREQ_HZ XPAR_XPCI_CLOCK_HZ
-#define XPAR_PCI_0_DEVICE_ID XPAR_OPB_PCI_REF_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0
-#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0
-#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0
-#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1
-#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1
-#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1
-
-/******************************************************************/
-
-#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-#define XPAR_DDR_0_SIZE 0x08000000
-
-/******************************************************************/
-
-#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
-#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
-#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
-
-/******************************************************************/
-
-#define XPAR_POWER_0_POWERDOWN_BASEADDR 0x90000004
-#define XPAR_POWER_0_POWERDOWN_HIGHADDR 0x90000007
-#define XPAR_POWER_0_POWERDOWN_VALUE 0xFF
-
-/******************************************************************/
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
deleted file mode 100644
index 5cacdcb3964d..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
+++ /dev/null
@@ -1,243 +0,0 @@
-
-/*******************************************************************
-*
-* CAUTION: This file is automatically generated by libgen.
-* Version: Xilinx EDK 7.1.2 EDK_H.12.5.1
-* DO NOT EDIT.
-*
-* Copyright (c) 2005 Xilinx, Inc.  All rights reserved. 
-* 
-* Description: Driver parameters
-*
-*******************************************************************/
-
-#define XPAR_PLB_BRAM_IF_CNTLR_0_BASEADDR 0xFFFF0000
-#define XPAR_PLB_BRAM_IF_CNTLR_0_HIGHADDR 0xFFFFFFFF
-
-/******************************************************************/
-
-#define XPAR_OPB_EMC_0_MEM0_BASEADDR 0x20000000
-#define XPAR_OPB_EMC_0_MEM0_HIGHADDR 0x200FFFFF
-#define XPAR_OPB_EMC_0_MEM1_BASEADDR 0x28000000
-#define XPAR_OPB_EMC_0_MEM1_HIGHADDR 0x287FFFFF
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
-#define XPAR_OPB_EMC_USB_0_MEM0_BASEADDR 0xA5000000
-#define XPAR_OPB_EMC_USB_0_MEM0_HIGHADDR 0xA50000FF
-#define XPAR_PLB_DDR_0_MEM0_BASEADDR 0x00000000
-#define XPAR_PLB_DDR_0_MEM0_HIGHADDR 0x0FFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
-
-/******************************************************************/
-
-#define XPAR_XUARTNS550_NUM_INSTANCES 1
-#define XPAR_XUARTNS550_CLOCK_HZ 100000000
-#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
-#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
-#define XPAR_OPB_UART16550_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XGPIO_NUM_INSTANCES 3
-#define XPAR_OPB_GPIO_0_BASEADDR 0x90000000
-#define XPAR_OPB_GPIO_0_HIGHADDR 0x900001FF
-#define XPAR_OPB_GPIO_0_DEVICE_ID 0
-#define XPAR_OPB_GPIO_0_INTERRUPT_PRESENT 0
-#define XPAR_OPB_GPIO_0_IS_DUAL 1
-#define XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR 0x90001000
-#define XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR 0x900011FF
-#define XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID 1
-#define XPAR_OPB_GPIO_EXP_HDR_0_INTERRUPT_PRESENT 0
-#define XPAR_OPB_GPIO_EXP_HDR_0_IS_DUAL 1
-#define XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR 0x90002000
-#define XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR 0x900021FF
-#define XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID 2
-#define XPAR_OPB_GPIO_CHAR_LCD_0_INTERRUPT_PRESENT 0
-#define XPAR_OPB_GPIO_CHAR_LCD_0_IS_DUAL 0
-
-/******************************************************************/
-
-#define XPAR_XPS2_NUM_INSTANCES 2
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
-
-/******************************************************************/
-
-#define XPAR_XIIC_NUM_INSTANCES 1
-#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
-#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
-#define XPAR_OPB_IIC_0_DEVICE_ID 0
-#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
-#define XPAR_OPB_IIC_0_GPO_WIDTH 1
-
-/******************************************************************/
-
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 10
-#define XPAR_XINTC_HAS_IPR 1
-#define XPAR_XINTC_USE_DCR 0
-#define XPAR_XINTC_NUM_INSTANCES 1
-#define XPAR_OPB_INTC_0_BASEADDR 0xD1000FC0
-#define XPAR_OPB_INTC_0_HIGHADDR 0xD1000FDF
-#define XPAR_OPB_INTC_0_DEVICE_ID 0
-#define XPAR_OPB_INTC_0_KIND_OF_INTR 0x00000000
-
-/******************************************************************/
-
-#define XPAR_INTC_SINGLE_BASEADDR 0xD1000FC0
-#define XPAR_INTC_SINGLE_HIGHADDR 0xD1000FDF
-#define XPAR_INTC_SINGLE_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
-#define XPAR_OPB_ETHERNET_0_IP2INTC_IRPT_MASK 0X000001
-#define XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 0
-#define XPAR_SYSTEM_USB_HPI_INT_MASK 0X000002
-#define XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR 1
-#define XPAR_MISC_LOGIC_0_PHY_MII_INT_MASK 0X000004
-#define XPAR_OPB_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 2
-#define XPAR_OPB_SYSACE_0_SYSACE_IRQ_MASK 0X000008
-#define XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 3
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_MASK 0X000010
-#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 4
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_MASK 0X000020
-#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 5
-#define XPAR_OPB_IIC_0_IP2INTC_IRPT_MASK 0X000040
-#define XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 6
-#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR2_MASK 0X000080
-#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 7
-#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR1_MASK 0X000100
-#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
-#define XPAR_OPB_UART16550_0_IP2INTC_IRPT_MASK 0X000200
-#define XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 9
-
-/******************************************************************/
-
-#define XPAR_XTFT_NUM_INSTANCES 1
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
-#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XSYSACE_MEM_WIDTH 16
-#define XPAR_XSYSACE_NUM_INSTANCES 1
-#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
-#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
-#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
-#define XPAR_OPB_SYSACE_0_MEM_WIDTH 16
-
-/******************************************************************/
-
-#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
-
-/******************************************************************/
-
-
-/******************************************************************/
-
-/* Linux Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_BASEADDR XPAR_OPB_INTC_0_BASEADDR
-#define XPAR_INTC_0_HIGHADDR XPAR_OPB_INTC_0_HIGHADDR
-#define XPAR_INTC_0_KIND_OF_INTR XPAR_OPB_INTC_0_KIND_OF_INTR
-#define XPAR_INTC_0_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR
-#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR
-#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR
-#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
-
-/******************************************************************/
-
-#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_GPIO_0_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_0
-#define XPAR_GPIO_0_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_0
-#define XPAR_GPIO_0_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_0
-#define XPAR_GPIO_1_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_1
-#define XPAR_GPIO_1_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_1
-#define XPAR_GPIO_1_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_1
-#define XPAR_GPIO_2_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_0
-#define XPAR_GPIO_2_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_0
-#define XPAR_GPIO_2_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_0
-#define XPAR_GPIO_3_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_1
-#define XPAR_GPIO_3_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_1
-#define XPAR_GPIO_3_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_1
-#define XPAR_GPIO_4_BASEADDR XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR
-#define XPAR_GPIO_4_HIGHADDR XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR
-#define XPAR_GPIO_4_DEVICE_ID XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0
-#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0
-#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0
-#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1
-#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1
-#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1
-
-/******************************************************************/
-
-#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR
-#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR
-#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
-#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
-#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
-#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-#define XPAR_DDR_0_SIZE 0x4000000
-
-/******************************************************************/
-
-#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
-#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
-#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
-
-/******************************************************************/
-
-#define XPAR_PCI_0_CLOCK_FREQ_HZ    0
-
-/******************************************************************/
-
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
deleted file mode 100644
index f6cfd44281fc..000000000000
--- a/arch/ppc/platforms/4xx/yucca.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- * Yucca board specific routines
- *
- * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter)
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/ibm44x_common.h>
-#include <syslib/ibm440gx_common.h>
-#include <syslib/ibm440sp_common.h>
-#include <syslib/ppc440spe_pcie.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-yucca_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = YUCCA_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-yucca_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: AMCC\n");
-	seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n");
-
-	return 0;
-}
-
-static enum {
-	HOSE_UNKNOWN,
-	HOSE_PCIX,
-	HOSE_PCIE0,
-	HOSE_PCIE1,
-	HOSE_PCIE2
-} hose_type[4];
-
-static inline int
-yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose_type[hose->index] == HOSE_PCIX) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 81, -1, -1, -1 },	/* IDSEL 1 - PCIX0 Slot 0 */
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else if (hose_type[hose->index] == HOSE_PCIE0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 96, 97, 98, 99 },
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else if (hose_type[hose->index] == HOSE_PCIE1) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 100, 101, 102, 103 },
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else if (hose_type[hose->index] == HOSE_PCIE2) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 104, 105, 106, 107 },
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-	return -1;
-}
-
-static void __init yucca_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-
-	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_GMII;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-}
-
-static int __init yucca_pcie_card_present(int port)
-{
-   void __iomem *pcie_fpga_base;
-   u16 reg;
-
-   pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
-   reg = in_be16(pcie_fpga_base + FPGA_REG1C);
-   iounmap(pcie_fpga_base);
-
-   switch(port) {
-   case 0: return !(reg & FPGA_REG1C_PE0_PRSNT);
-   case 1: return !(reg & FPGA_REG1C_PE1_PRSNT);
-   case 2: return !(reg & FPGA_REG1C_PE2_PRSNT);
-   default: return 0;
-   }
-}
-
-/*
- * For the given slot, set rootpoint mode, send power to the slot,
- * turn on the green LED and turn off the yellow LED, enable the clock
- * and turn off reset.
- */
-static void __init yucca_setup_pcie_fpga_rootpoint(int port)
-{
-	void __iomem *pcie_reg_fpga_base;
-	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
-
-	pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
-
-	switch(port) {
-	case 0:
-		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
-		endpoint    = 0;
-		power 	    = FPGA_REG1A_PE0_PWRON;
-		green_led   = FPGA_REG1A_PE0_GLED;
-		clock 	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE0_YLED;
-		reset_off   = FPGA_REG1C_PE0_PERST;
-		break;
-	case 1:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
-		power 	    = FPGA_REG1A_PE1_PWRON;
-		green_led   = FPGA_REG1A_PE1_GLED;
-		clock 	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE1_YLED;
-		reset_off   = FPGA_REG1C_PE1_PERST;
-		break;
-	case 2:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
-		power 	    = FPGA_REG1A_PE2_PWRON;
-		green_led   = FPGA_REG1A_PE2_GLED;
-		clock 	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE2_YLED;
-		reset_off   = FPGA_REG1C_PE2_PERST;
-		break;
-
-	default:
-		iounmap(pcie_reg_fpga_base);
-		return;
-	}
-
-	out_be16(pcie_reg_fpga_base + FPGA_REG1A,
-		 ~(power | clock | green_led) &
-		 (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A)));
-	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
-		 ~(endpoint | reset_off) &
-		 (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C)));
-
-	/*
-	 * Leave device in reset for a while after powering on the
-	 * slot to give it a chance to initialize.
-	 */
-	mdelay(250);
-
-	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
-		 reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C));
-
-	iounmap(pcie_reg_fpga_base);
-}
-
-static void __init
-yucca_setup_hoses(void)
-{
-	struct pci_controller *hose;
-	char name[20];
-	int i;
-
-	if (0 && ppc440spe_init_pcie()) {
-		printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n");
-		return;
-	}
-
-	for (i = 0; i <= 2; ++i) {
-		if (!yucca_pcie_card_present(i))
-			continue;
-
-		printk(KERN_INFO "PCIE%d: card present\n", i);
-		yucca_setup_pcie_fpga_rootpoint(i);
-		if (ppc440spe_init_pcie_rootport(i)) {
-			printk(KERN_WARNING "PCIE%d: initialization failed\n", i);
-			continue;
-		}
-
-		hose = pcibios_alloc_controller();
-		if (!hose)
-			return;
-
-		sprintf(name, "PCIE%d host bridge", i);
-		pci_init_resource(&hose->io_resource,
-				  YUCCA_PCIX_LOWER_IO,
-				  YUCCA_PCIX_UPPER_IO,
-				  IORESOURCE_IO,
-				  name);
-
-		hose->mem_space.start = YUCCA_PCIE_LOWER_MEM +
-			i * YUCCA_PCIE_MEM_SIZE;
-		hose->mem_space.end   = hose->mem_space.start +
-			YUCCA_PCIE_MEM_SIZE - 1;
-
-		pci_init_resource(&hose->mem_resources[0],
-				  hose->mem_space.start,
-				  hose->mem_space.end,
-				  IORESOURCE_MEM,
-				  name);
-
-		hose->first_busno = 0;
-		hose->last_busno  = 15;
-		hose_type[hose->index] = HOSE_PCIE0 + i;
-
-		ppc440spe_setup_pcie(hose, i);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-	}
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = yucca_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-yucca_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8);
-	port.irq = UART2_INT;
-	port.uartclk = BASE_BAUD;
-	port.line = 2;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 2 failed\n");
-	}
-}
-
-static void __init
-yucca_setup_arch(void)
-{
-	yucca_set_emacdata();
-
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-	mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
-#endif
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	/* 440GX and 440SPe clocking is the same - rd */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCIXn host bridges */
-	yucca_setup_hoses();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	yucca_early_serial_map();
-
-	/* Identify the system */
-	printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = yucca_setup_arch;
-	ppc_md.show_cpuinfo = yucca_show_cpuinfo;
-	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = yucca_calibrate_decr;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = yucca_early_serial_map;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h
deleted file mode 100644
index bc9684e66a84..000000000000
--- a/arch/ppc/platforms/4xx/yucca.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Yucca board definitions
- *
- * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter)
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_YUCCA_H__
-#define __ASM_YUCCA_H__
-
-#include <platforms/4xx/ppc440spe.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xa0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE		0xffe00000
-#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
-
-/* External timer clock frequency */
-#define YUCCA_TMR_CLK		25000000
-
-/*
- * FPGA registers
- */
-#define YUCCA_FPGA_REG_BASE			0x00000004e2000000ULL
-#define YUCCA_FPGA_REG_SIZE			0x24
-
-#define FPGA_REG1A				0x1a
-
-#define FPGA_REG1A_PE0_GLED			0x8000
-#define FPGA_REG1A_PE1_GLED			0x4000
-#define FPGA_REG1A_PE2_GLED			0x2000
-#define FPGA_REG1A_PE0_YLED			0x1000
-#define FPGA_REG1A_PE1_YLED			0x0800
-#define FPGA_REG1A_PE2_YLED			0x0400
-#define FPGA_REG1A_PE0_PWRON			0x0200
-#define FPGA_REG1A_PE1_PWRON			0x0100
-#define FPGA_REG1A_PE2_PWRON			0x0080
-#define FPGA_REG1A_PE0_REFCLK_ENABLE		0x0040
-#define FPGA_REG1A_PE1_REFCLK_ENABLE		0x0020
-#define FPGA_REG1A_PE2_REFCLK_ENABLE		0x0010
-#define FPGA_REG1A_PE_SPREAD0			0x0008
-#define FPGA_REG1A_PE_SPREAD1			0x0004
-#define FPGA_REG1A_PE_SELSOURCE_0		0x0002
-#define FPGA_REG1A_PE_SELSOURCE_1		0x0001
-
-#define FPGA_REG1C				0x1c
-
-#define FPGA_REG1C_PE0_ROOTPOINT		0x8000
-#define FPGA_REG1C_PE1_ENDPOINT			0x4000
-#define FPGA_REG1C_PE2_ENDPOINT			0x2000
-#define FPGA_REG1C_PE0_PRSNT			0x1000
-#define FPGA_REG1C_PE1_PRSNT			0x0800
-#define FPGA_REG1C_PE2_PRSNT			0x0400
-#define FPGA_REG1C_PE0_WAKE			0x0080
-#define FPGA_REG1C_PE1_WAKE			0x0040
-#define FPGA_REG1C_PE2_WAKE			0x0020
-#define FPGA_REG1C_PE0_PERST			0x0010
-#define FPGA_REG1C_PE1_PERST			0x0008
-#define FPGA_REG1C_PE2_PERST			0x0004
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	3
-
-/* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE	0xa0000200
-#define UART1_IO_BASE	0xa0000300
-#define UART2_IO_BASE	0xa0000600
-
-#define BASE_BAUD	11059200
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-
-/* PCI support */
-#define YUCCA_PCIX_LOWER_IO	0x00000000
-#define YUCCA_PCIX_UPPER_IO	0x0000ffff
-#define YUCCA_PCIX_LOWER_MEM	0x80000000
-#define YUCCA_PCIX_UPPER_MEM	0x8fffffff
-#define YUCCA_PCIE_LOWER_MEM	0x90000000
-#define YUCCA_PCIE_MEM_SIZE	0x10000000
-
-#define YUCCA_PCIX_MEM_SIZE	0x10000000
-#define YUCCA_PCIX_MEM_OFFSET	0x00000000
-#define YUCCA_PCIE_MEM_SIZE	0x10000000
-#define YUCCA_PCIE_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_YUCCA_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
deleted file mode 100644
index 6260231987cb..000000000000
--- a/arch/ppc/platforms/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_PPC_PREP)		+= prep_pci.o prep_setup.o
-obj-$(CONFIG_PREP_RESIDUAL)	+= residual.o
-obj-$(CONFIG_TQM8260)		+= tqm8260_setup.o
-obj-$(CONFIG_CPCI690)		+= cpci690.o
-obj-$(CONFIG_EV64260)		+= ev64260.o
-obj-$(CONFIG_CHESTNUT)		+= chestnut.o
-obj-$(CONFIG_LOPEC)		+= lopec.o
-obj-$(CONFIG_KATANA)		+= katana.o
-obj-$(CONFIG_HDPU)		+= hdpu.o
-obj-$(CONFIG_MVME5100)		+= mvme5100.o
-obj-$(CONFIG_PAL4)		+= pal4_setup.o pal4_pci.o
-obj-$(CONFIG_POWERPMC250)	+= powerpmc250.o
-obj-$(CONFIG_PPLUS)		+= pplus.o
-obj-$(CONFIG_PRPMC750)		+= prpmc750.o
-obj-$(CONFIG_PRPMC800)		+= prpmc800.o
-obj-$(CONFIG_RADSTONE_PPC7D)	+= radstone_ppc7d.o
-obj-$(CONFIG_SANDPOINT)		+= sandpoint.o
-obj-$(CONFIG_SBC82xx)		+= sbc82xx.o
-obj-$(CONFIG_SPRUCE)		+= spruce.o
-obj-$(CONFIG_LITE5200)		+= lite5200.o
-obj-$(CONFIG_EV64360)		+= ev64360.o
diff --git a/arch/ppc/platforms/bseip.h b/arch/ppc/platforms/bseip.h
deleted file mode 100644
index 691f4a52b0a5..000000000000
--- a/arch/ppc/platforms/bseip.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Bright Star Engineering ip-Engine board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifndef __MACH_BSEIP_DEFS
-#define __MACH_BSEIP_DEFS
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * All we need to get started is the IMMR.
- */
-#define IMAP_ADDR		((uint)0xff000000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0x04000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#endif	/* !__ASSEMBLY__ */
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif
diff --git a/arch/ppc/platforms/ccm.h b/arch/ppc/platforms/ccm.h
deleted file mode 100644
index 69000b1c7a4c..000000000000
--- a/arch/ppc/platforms/ccm.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Siemens Card Controller Module specific definitions
- *
- * Copyright (C) 2001-2002 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_CCM_H
-#define __MACH_CCM_H
-
-
-#include <asm/ppcboot.h>
-
-#define	CCM_IMMR_BASE    0xF0000000	/* phys. addr of IMMR			*/
-#define	CCM_IMAP_SIZE   (64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR     CCM_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE     CCM_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-#define	FEC_INTERRUPT	13		/* = SIU_LEVEL6				*/
-#define	DEC_INTERRUPT	11		/* = SIU_LEVEL5				*/
-#define	CPM_INTERRUPT	 9		/* = SIU_LEVEL4				*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_CCM_H */
diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
deleted file mode 100644
index 27c140f218ed..000000000000
--- a/arch/ppc/platforms/chestnut.c
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * Board setup routines for IBM Chestnut
- *
- * Author: <source@mvista.com>
- *
- * <2004> (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/machdep.h>
-#include <asm/kgdb.h>
-#include <asm/bootinfo.h>
-#include <asm/mv64x60.h>
-#include <platforms/chestnut.h>
-
-static void __iomem *sram_base; /* Virtual addr of Internal SRAM */
-static void __iomem *cpld_base; /* Virtual addr of CPLD Regs */
-
-static mv64x60_handle_t	bh;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-extern void mv64360_pcibios_fixup(mv64x60_handle_t *bh);
-
-#define CHESTNUT_PRESERVE_MASK (BIT(MV64x60_CPU2DEV_0_WIN) | \
-				BIT(MV64x60_CPU2DEV_1_WIN) | \
-				BIT(MV64x60_CPU2DEV_2_WIN) | \
-				BIT(MV64x60_CPU2DEV_3_WIN) | \
-				BIT(MV64x60_CPU2BOOT_WIN))
-/**************************************************************************
- * FUNCTION: chestnut_calibrate_decr
- *
- * DESCRIPTION: initialize decrementer interrupt frequency (used as system
- *              timer)
- *
- ****/
-static void __init
-chestnut_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = CHESTNUT_BUS_SPEED / 4;
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-		freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-static int
-chestnut_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: 750FX/GX Eval Board (Chestnut/Buckeye)\n");
-
-	return 0;
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_find_end_of_memory
- *
- * DESCRIPTION: ppc_md memory size callback
- *
- ****/
-unsigned long __init
-chestnut_find_end_of_memory(void)
-{
-   	static int  mem_size = 0;
-
-   	if (mem_size == 0) {
-      		mem_size = mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-				MV64x60_TYPE_MV64460);
-   	}
-   	return mem_size;
-}
-
-#if defined(CONFIG_SERIAL_8250)
-static void __init
-chestnut_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-	port.uartclk = BASE_BAUD * 16;
-	port.irq = UART0_INT;
-	port.flags = STD_COM_FLAGS | UPF_IOREMAP;
-	port.iotype = UPIO_MEM;
-	port.mapbase = CHESTNUT_UART0_IO_BASE;
-	port.regshift = 0;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 0 failed\n");
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	port.line = 1;
-	port.irq = UART1_INT;
-	port.mapbase = CHESTNUT_UART1_IO_BASE;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 1 failed\n");
-}
-#endif
-
-/**************************************************************************
- * FUNCTION: chestnut_map_irq
- *
- * DESCRIPTION: 0 return since PCI IRQs not needed
- *
- ****/
-static int __init
-chestnut_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		{CHESTNUT_PCI_SLOT0_IRQ, CHESTNUT_PCI_SLOT0_IRQ,
-		 CHESTNUT_PCI_SLOT0_IRQ, CHESTNUT_PCI_SLOT0_IRQ},
-		{CHESTNUT_PCI_SLOT1_IRQ, CHESTNUT_PCI_SLOT1_IRQ,
-		 CHESTNUT_PCI_SLOT1_IRQ, CHESTNUT_PCI_SLOT1_IRQ},
-		{CHESTNUT_PCI_SLOT2_IRQ, CHESTNUT_PCI_SLOT2_IRQ,
-		 CHESTNUT_PCI_SLOT2_IRQ, CHESTNUT_PCI_SLOT2_IRQ},
-		{CHESTNUT_PCI_SLOT3_IRQ, CHESTNUT_PCI_SLOT3_IRQ,
-		 CHESTNUT_PCI_SLOT3_IRQ, CHESTNUT_PCI_SLOT3_IRQ},
-	};
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-
-/**************************************************************************
- * FUNCTION: chestnut_setup_bridge
- *
- * DESCRIPTION: initalize board-specific settings on the MV64360
- *
- ****/
-static void __init
-chestnut_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int i;
-
-   	if ( ppc_md.progress )
-		ppc_md.progress("chestnut_setup_bridge: enter", 0);
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	/* setup only PCI bus 0 (bus 1 not used) */
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = CHESTNUT_PCI0_IO_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = CHESTNUT_PCI0_IO_PCI_ADDR;
-	si.pci_0.pci_io.size = CHESTNUT_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE; /* no swapping */
-	si.pci_0.pci_mem[0].cpu_base = CHESTNUT_PCI0_MEM_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = CHESTNUT_PCI0_MEM_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = CHESTNUT_PCI0_MEM_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = CHESTNUT_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE; /* no swapping */
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-   	/* Lookup host bridge - on CPU 0 - no SMP support */
-   	if (mv64x60_init(&bh, &si)) {
-        	printk("\n\nPCI Bridge initialization failed!\n");
-   	}
-
-	pci_dram_offset = 0;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = chestnut_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-}
-
-void __init
-chestnut_setup_peripherals(void)
-{
-   	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-			CHESTNUT_BOOT_8BIT_BASE, CHESTNUT_BOOT_8BIT_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-			CHESTNUT_32BIT_BASE, CHESTNUT_32BIT_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-			CHESTNUT_CPLD_BASE, CHESTNUT_CPLD_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	cpld_base = ioremap(CHESTNUT_CPLD_BASE, CHESTNUT_CPLD_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-			CHESTNUT_UART_BASE, CHESTNUT_UART_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-			CHESTNUT_FRAM_BASE, CHESTNUT_FRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-   	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-			CHESTNUT_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-   	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b0);
-#else
-   	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-	sram_base = ioremap(CHESTNUT_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-   	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/*
-	 * Configure MPP pins for PCI DMA
-	 *
-	 * PCI Slot	GNT pin		REQ pin
-	 *	0	MPP16		MPP17
-	 *	1	MPP18		MPP19
-	 *	2	MPP20		MPP21
-	 *	3	MPP22		MPP23
-	 */
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2,
-			(0x1 << 0)  |	/* MPPSel16 PCI0_GNT[0] */
-			(0x1 << 4)  |	/* MPPSel17 PCI0_REQ[0] */
-			(0x1 << 8)  |	/* MPPSel18 PCI0_GNT[1] */
-			(0x1 << 12) |	/* MPPSel19 PCI0_REQ[1] */
-			(0x1 << 16) |	/* MPPSel20 PCI0_GNT[2] */
-			(0x1 << 20) |	/* MPPSel21 PCI0_REQ[2] */
-			(0x1 << 24) |	/* MPPSel22 PCI0_GNT[3] */
-			(0x1 << 28));	/* MPPSel23 PCI0_REQ[3] */
-	/*
-	 * Set unused MPP pins for output, as per schematic note
-	 *
-	 * Unused Pins: MPP01, MPP02, MPP04, MPP05, MPP06
-	 *		MPP09, MPP10, MPP13, MPP14, MPP15
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_0,
-			(0xf << 4)  |	/* MPPSel01 GPIO[1] */
-			(0xf << 8)  |	/* MPPSel02 GPIO[2] */
-			(0xf << 16) |	/* MPPSel04 GPIO[4] */
-			(0xf << 20) |	/* MPPSel05 GPIO[5] */
-			(0xf << 24));	/* MPPSel06 GPIO[6] */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1,
-			(0xf << 4)  |	/* MPPSel09 GPIO[9] */
-			(0xf << 8)  |	/* MPPSel10 GPIO[10] */
-			(0xf << 20) |	/* MPPSel13 GPIO[13] */
-			(0xf << 24) |	/* MPPSel14 GPIO[14] */
-			(0xf << 28));	/* MPPSel15 GPIO[15] */
-	mv64x60_set_bits(&bh, MV64x60_GPP_IO_CNTL, /* Output */
-			BIT(1)  | BIT(2)  | BIT(4)  | BIT(5)  | BIT(6)  |
-			BIT(9)  | BIT(10) | BIT(13) | BIT(14) | BIT(15));
-
-   	/*
-    	 * Configure the following MPP pins to indicate a level
-    	 * triggered interrupt
-    	 *
-       	 * MPP24 - Board Reset (just map the MPP & GPP for chestnut_reset)
-       	 * MPP25 - UART A  (high)
-       	 * MPP26 - UART B  (high)
-	 * MPP28 - PCI Slot 3 (low)
-	 * MPP29 - PCI Slot 2 (low)
-	 * MPP30 - PCI Slot 1 (low)
-	 * MPP31 - PCI Slot 0 (low)
-    	 */
-        mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3,
-                        BIT(3) | BIT(2) | BIT(1) | BIT(0)	 | /* MPP 24 */
-                        BIT(7) | BIT(6) | BIT(5) | BIT(4)	 | /* MPP 25 */
-                        BIT(11) | BIT(10) | BIT(9) | BIT(8)	 | /* MPP 26 */
-			BIT(19) | BIT(18) | BIT(17) | BIT(16)	 | /* MPP 28 */
-			BIT(23) | BIT(22) | BIT(21) | BIT(20)	 | /* MPP 29 */
-			BIT(27) | BIT(26) | BIT(25) | BIT(24)	 | /* MPP 30 */
-			BIT(31) | BIT(30) | BIT(29) | BIT(28));    /* MPP 31 */
-
-   	/*
-	 * Define GPP 25 (high), 26 (high), 28 (low), 29 (low), 30 (low),
-	 * 31 (low) interrupt polarity input signal and level triggered
-    	 */
-   	mv64x60_clr_bits(&bh, MV64x60_GPP_LEVEL_CNTL, BIT(25) | BIT(26));
-   	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL,
-			BIT(28) | BIT(29) | BIT(30) | BIT(31));
-   	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL,
-			BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			BIT(31));
-
-   	/* Config GPP interrupt controller to respond to level trigger */
-   	mv64x60_set_bits(&bh, MV64360_COMM_ARBITER_CNTL, BIT(10));
-
-   	/*
-    	 * Dismiss and then enable interrupt on GPP interrupt cause for CPU #0
-    	 */
-   	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE,
-			~(BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			  BIT(31)));
-   	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK,
-			BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			BIT(31));
-
-   	/*
-    	 * Dismiss and then enable interrupt on CPU #0 high cause register
-    	 * BIT27 summarizes GPP interrupts 24-31
-    	 */
-   	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, BIT(27));
-
-   	if (ppc_md.progress)
-		ppc_md.progress("chestnut_setup_bridge: exit", 0);
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_setup_arch
- *
- * DESCRIPTION: ppc_md machine configuration callback
- *
- ****/
-static void __init
-chestnut_setup_arch(void)
-{
-	if (ppc_md.progress)
-      		ppc_md.progress("chestnut_setup_arch: enter", 0);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-   	/* if the time base value is greater than bus freq/4 (the TB and
-    	* decrementer tick rate) + signed integer rollover value, we
-    	* can spend a fair amount of time waiting for the rollover to
-    	* happen.  To get around this, initialize the time base register
-    	* to a "safe" value.
-    	*/
-   	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-   	/*
-    	* Set up the L2CR register.
-    	*/
- 	_set_L2CR(_get_L2CR() | L2CR_L2E);
-
-	chestnut_setup_bridge();
-	chestnut_setup_peripherals();
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-#if defined(CONFIG_SERIAL_8250)
-	chestnut_early_serial_map();
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "System Identification: IBM 750FX/GX Eval Board\n");
-	printk(KERN_INFO "IBM 750FX/GX port (C) 2004 MontaVista Software, Inc."
-		" (source@mvista.com)\n");
-
-	if (ppc_md.progress)
-      		ppc_md.progress("chestnut_setup_arch: exit", 0);
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition ptbl;
-
-static int __init
-chestnut_setup_mtd(void)
-{
-	memset(&ptbl, 0, sizeof(ptbl));
-
-	ptbl.name = "User FS";
-	ptbl.size = CHESTNUT_32BIT_SIZE;
-
-	physmap_map.size = CHESTNUT_32BIT_SIZE;
-	physmap_set_partitions(&ptbl, 1);
-	return 0;
-}
-
-arch_initcall(chestnut_setup_mtd);
-#endif
-
-/**************************************************************************
- * FUNCTION: chestnut_restart
- *
- * DESCRIPTION: ppc_md machine reset callback
- *              reset the board via the CPLD command register
- *
- ****/
-static void
-chestnut_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	local_irq_disable();
-
-        /*
-         * Set CPLD Reg 3 bit 0 to 1 to allow MPP signals on reset to work
-         *
-         * MPP24 - board reset
-         */
-   	writeb(0x1, cpld_base + 3);
-
-	/* GPP pin tied to MPP earlier */
-        mv64x60_set_bits(&bh, MV64x60_GPP_VALUE_SET, BIT(24));
-
-   	while (i-- > 0);
-   	panic("restart failed\n");
-}
-
-static void
-chestnut_halt(void)
-{
-	local_irq_disable();
-	for (;;);
-	/* NOTREACHED */
-}
-
-static void
-chestnut_power_off(void)
-{
-	chestnut_halt();
-	/* NOTREACHED */
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_map_io
- *
- * DESCRIPTION: configure fixed memory-mapped IO
- *
- ****/
-static void __init
-chestnut_map_io(void)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	io_block_mapping(CHESTNUT_UART_BASE, CHESTNUT_UART_BASE, 0x100000,
-		_PAGE_IO);
-#endif
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_set_bat
- *
- * DESCRIPTION: configures a (temporary) bat mapping for early access to
- *              device I/O
- *
- ****/
-static __inline__ void
-chestnut_set_bat(void)
-{
-        mb();
-        mtspr(SPRN_DBAT3U, 0xf0001ffe);
-        mtspr(SPRN_DBAT3L, 0xf000002a);
-        mb();
-}
-
-/**************************************************************************
- * FUNCTION: platform_init
- *
- * DESCRIPTION: main entry point for configuring board-specific machine
- *              callbacks
- *
- ****/
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-        /* Copy the kernel command line arguments to a safe place. */
-
-        if (r6) {
-                *(char *) (r7 + KERNELBASE) = 0;
-                strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-        }
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = chestnut_setup_arch;
-	ppc_md.show_cpuinfo = chestnut_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.init = NULL;
-
-	ppc_md.find_end_of_memory = chestnut_find_end_of_memory;
-	ppc_md.setup_io_mappings  = chestnut_map_io;
-
-	ppc_md.restart = chestnut_restart;
-   	ppc_md.power_off = chestnut_power_off;
-   	ppc_md.halt = chestnut_halt;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = chestnut_calibrate_decr;
-
-	ppc_md.nvram_read_val = NULL;
-	ppc_md.nvram_write_val = NULL;
-
-	ppc_md.heartbeat = NULL;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-
-	chestnut_set_bat();
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = gen550_progress;
-#endif
-#if defined(CONFIG_KGDB)
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-
-	if (ppc_md.progress)
-                ppc_md.progress("chestnut_init(): exit", 0);
-}
diff --git a/arch/ppc/platforms/chestnut.h b/arch/ppc/platforms/chestnut.h
deleted file mode 100644
index e00fd9f8bbd0..000000000000
--- a/arch/ppc/platforms/chestnut.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Definitions for IBM 750FXGX Eval (Chestnut)
- *
- * Author: <source@mvista.com>
- *
- * Based on Artesyn Katana code done by Tim Montgomery <timm@artesyncp.com>
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * <2004> (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This is the CPU physical memory map (windows must be at least 1MB and start
- * on a boundary that is a multiple of the window size):
- *
- * Seems on the IBM 750FXGX Eval board, the MV64460 Registers can be in
- * only 2 places per switch U17 0x14000000 or 0xf1000000 easily - chose to
- * implement at 0xf1000000 only at this time
- *
- *    0xfff00000-0xffffffff      - 8 Flash
- *    0xffe00000-0xffefffff      - BOOT SRAM
- *    0xffd00000-0xffd00004      - CPLD
- *    0xffc00000-0xffc0000f      - UART
- *    0xffb00000-0xffb07fff      - FRAM
- *    0xff840000-0xffafffff      - *** HOLE ***
- *    0xff800000-0xff83ffff      - MV64460 Integrated SRAM
- *    0xfe000000-0xff8fffff      - *** HOLE ***
- *    0xfc000000-0xfdffffff      - 32bit Flash
- *    0xf1010000-0xfbffffff      - *** HOLE ***
- *    0xf1000000-0xf100ffff      - MV64460 Registers
- */
-
-#ifndef __PPC_PLATFORMS_CHESTNUT_H__
-#define __PPC_PLATFORMS_CHESTNUT_H__
-
-#define CHESTNUT_BOOT_8BIT_BASE			0xfff00000
-#define CHESTNUT_BOOT_8BIT_SIZE_ACTUAL		(1024*1024)
-#define CHESTNUT_BOOT_SRAM_BASE			0xffe00000
-#define CHESTNUT_BOOT_SRAM_SIZE_ACTUAL		(1024*1024)
-#define CHESTNUT_CPLD_BASE			0xffd00000
-#define CHESTNUT_CPLD_SIZE_ACTUAL		5
-#define CHESTNUT_CPLD_REG3			(CHESTNUT_CPLD_BASE+3)
-#define CHESTNUT_UART_BASE			0xffc00000
-#define CHESTNUT_UART_SIZE_ACTUAL		16
-#define CHESTNUT_FRAM_BASE			0xffb00000
-#define CHESTNUT_FRAM_SIZE_ACTUAL		(32*1024)
-#define CHESTNUT_INTERNAL_SRAM_BASE		0xff800000
-#define CHESTNUT_32BIT_BASE			0xfc000000
-#define CHESTNUT_32BIT_SIZE			(32*1024*1024)
-
-#define CHESTNUT_BOOT_8BIT_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_BOOT_8BIT_SIZE_ACTUAL)
-#define CHESTNUT_BOOT_SRAM_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_BOOT_SRAM_SIZE_ACTUAL)
-#define CHESTNUT_CPLD_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_CPLD_SIZE_ACTUAL)
-#define CHESTNUT_UART_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_UART_SIZE_ACTUAL)
-#define CHESTNUT_FRAM_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_FRAM_SIZE_ACTUAL)
-
-#define CHESTNUT_BUS_SPEED		200000000
-#define CHESTNUT_PIBS_DATABASE		0xf0000 /* from PIBS src code */
-
-#define	KATANA_ETH0_PHY_ADDR			12
-#define	KATANA_ETH1_PHY_ADDR			11
-#define	KATANA_ETH2_PHY_ADDR			4
-
-#define CHESTNUT_ETH_TX_QUEUE_SIZE		800
-#define CHESTNUT_ETH_RX_QUEUE_SIZE		400
-
-/*
- * PCI windows
- */
-
-#define CHESTNUT_PCI0_MEM_PROC_ADDR	0x80000000
-#define CHESTNUT_PCI0_MEM_PCI_HI_ADDR	0x00000000
-#define CHESTNUT_PCI0_MEM_PCI_LO_ADDR	0x80000000
-#define CHESTNUT_PCI0_MEM_SIZE		0x10000000
-#define CHESTNUT_PCI0_IO_PROC_ADDR	0xa0000000
-#define CHESTNUT_PCI0_IO_PCI_ADDR	0x00000000
-#define CHESTNUT_PCI0_IO_SIZE		0x01000000
-
-/*
- * Board-specific IRQ info
- */
-#define CHESTNUT_PCI_SLOT0_IRQ	(64 + 31)
-#define CHESTNUT_PCI_SLOT1_IRQ	(64 + 30)
-#define CHESTNUT_PCI_SLOT2_IRQ	(64 + 29)
-#define CHESTNUT_PCI_SLOT3_IRQ	(64 + 28)
-
-/* serial port definitions */
-#define CHESTNUT_UART0_IO_BASE  (CHESTNUT_UART_BASE + 8)
-#define CHESTNUT_UART1_IO_BASE  CHESTNUT_UART_BASE
-
-#define UART0_INT           	(64 + 25)
-#define UART1_INT        	(64 + 26)
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE  64
-#else
-#define RS_TABLE_SIZE  2
-#endif
-
-/* Rate for the 3.6864 Mhz clock for the onboard serial chip */
-#define BASE_BAUD 		(3686400 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-#define STD_UART_OP(num)						\
-        { 0, BASE_BAUD, 0, UART##num##_INT, STD_COM_FLAGS,		\
-                iomem_base: (u8 *)CHESTNUT_UART##num##_IO_BASE,	\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(0)          \
-        STD_UART_OP(1)
-
-#endif /* __PPC_PLATFORMS_CHESTNUT_H__ */
diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c
deleted file mode 100644
index 07f672d58767..000000000000
--- a/arch/ppc/platforms/cpci690.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * Board setup routines for the Force CPCI690 board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This programr
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <asm/time.h>
-#include <asm/mv64x60.h>
-#include <platforms/cpci690.h>
-
-#define BOARD_VENDOR	"Force"
-#define BOARD_MACHINE	"CPCI690"
-
-/* Set IDE controllers into Native mode? */
-#define SET_PCI_IDE_NATIVE
-
-static struct mv64x60_handle	bh;
-static void __iomem *cpci690_br_base;
-
-TODC_ALLOC();
-
-static int __init
-cpci690_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller	*hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{ 90, 91, 88, 89 }, /* IDSEL 30/20 - Sentinel */
-		};
-
-		const long min_idsel = 20, max_idsel = 20, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{ 93, 94, 95, 92 }, /* IDSEL 28/18 - PMC slot 2 */
-			{  0,  0,  0,  0 }, /* IDSEL 29/19 - Not used */
-			{ 94, 95, 92, 93 }, /* IDSEL 30/20 - PMC slot 1 */
-		};
-
-		const long min_idsel = 18, max_idsel = 20, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-#define	GB	(1024UL * 1024UL * 1024UL)
-
-static u32
-cpci690_get_bus_freq(void)
-{
-	if (boot_mem_size >= (1*GB)) /* bus speed based on mem size */
-		return 100000000;
-	else
-		return 133333333;
-}
-
-static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */
-	 0,  0,  2,  2,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,/* 0-15*/
-	16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40,  0 /*16-31*/
-};
-
-static int
-cpci690_get_cpu_freq(void)
-{
-	unsigned long	pll_cfg;
-
-	pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27;
-	return cpci690_get_bus_freq() * cpu_750xx[pll_cfg]/2;
-}
-
-static void __init
-cpci690_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int				i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = CPCI690_PCI0_IO_START_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = CPCI690_PCI0_IO_START_PCI_ADDR;
-	si.pci_0.pci_io.size = CPCI690_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = CPCI690_PCI0_MEM_START_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = CPCI690_PCI0_MEM_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = CPCI690_PCI0_MEM_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = CPCI690_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = CPCI690_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = CPCI690_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = CPCI690_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = CPCI690_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = CPCI690_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = CPCI690_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = CPCI690_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		si.cpu_prot_options[i] = 0;
-		si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
-		si.pci_0.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-		si.pci_1.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-	}
-
-        /* Lookup PCI host bridges */
-        if (mv64x60_init(&bh, &si))
-                printk(KERN_ERR "Bridge initialization failed.\n");
-
-	pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = cpci690_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-}
-
-static void __init
-cpci690_setup_peripherals(void)
-{
-	/* Set up windows to CPLD, RTC/TODC, IPMI. */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, CPCI690_BR_BASE,
-		CPCI690_BR_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	cpci690_br_base = ioremap(CPCI690_BR_BASE, CPCI690_BR_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, CPCI690_TODC_BASE,
-		CPCI690_TODC_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	TODC_INIT(TODC_TYPE_MK48T35, 0, 0,
-			ioremap(CPCI690_TODC_BASE, CPCI690_TODC_SIZE), 8);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, CPCI690_IPMI_BASE,
-		CPCI690_IPMI_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
-	mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
-
-        mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
-
-	/*
-	 * Turn off timer/counters.  Not turning off watchdog timer because
-	 * can't read its reg on the 64260A so don't know if we'll be enabling
-	 * or disabling.
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-	mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-
-	/*
-	 * Set MPSC Multiplex RMII
-	 * NOTE: ethernet driver modifies bit 0 and 1
-	 */
-	mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-
-#define GPP_EXTERNAL_INTERRUPTS \
-		((1<<24) | (1<<25) | (1<<26) | (1<<27) | \
-		 (1<<28) | (1<<29) | (1<<30) | (1<<31))
-	/* PCI interrupts are inputs */
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
-	/* PCI interrupts are active low */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
-
-	/* Clear any pending interrupts for these inputs and enable them. */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
-
-	/* Route MPP interrupt inputs to GPP */
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, 0x00000000);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_3, 0x00000000);
-}
-
-static void __init
-cpci690_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: enter", 0);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef   CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: Enabling L2 cache", 0);
-
-	/* Enable L2 and L3 caches (if 745x) */
-	_set_L2CR(_get_L2CR() | L2CR_L2E);
-	_set_L3CR(_get_L3CR() | L3CR_L3E);
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: Initializing bridge", 0);
-
-	cpci690_setup_bridge();		/* set up PCI bridge(s) */
-	cpci690_setup_peripherals();	/* set up chip selects/GPP/MPP etc */
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: bridge init complete", 0);
-
-	printk(KERN_INFO "%s %s port (C) 2003 MontaVista Software, Inc. "
-		"(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: exit", 0);
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-cpci690_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = CPCI690_MPSC_BAUD;
-	pdata->brg_clk_src = CPCI690_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = cpci690_get_bus_freq();
-}
-
-static int
-cpci690_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-		{ MPSC_CTLR_NAME ".0", cpci690_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", cpci690_fixup_mpsc_pdata },
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-#endif
-
-static void
-cpci690_reset_board(void)
-{
-	u32	i = 10000;
-
-	local_irq_disable();
-	out_8((cpci690_br_base + CPCI690_BR_SW_RESET), 0x11);
-
-	while (i != 0) i++;
-	panic("restart failed\n");
-}
-
-static void
-cpci690_restart(char *cmd)
-{
-	cpci690_reset_board();
-}
-
-static void
-cpci690_halt(void)
-{
-	while (1);
-	/* NOTREACHED */
-}
-
-static void
-cpci690_power_off(void)
-{
-	cpci690_halt();
-	/* NOTREACHED */
-}
-
-static int
-cpci690_show_cpuinfo(struct seq_file *m)
-{
-	char	*s;
-
-	seq_printf(m, "cpu MHz\t\t: %d\n",
-		(cpci690_get_cpu_freq() + 500000) / 1000000);
-	seq_printf(m, "bus MHz\t\t: %d\n",
-		(cpci690_get_bus_freq() + 500000) / 1000000);
-	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
-	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
-	seq_printf(m, "FPGA Revision\t: %d\n",
-		in_8(cpci690_br_base + CPCI690_BR_MEM_CTLR) >> 5);
-
-	switch(bh.type) {
-	case MV64x60_TYPE_GT64260A:
-		s = "gt64260a";
-		break;
-	case MV64x60_TYPE_GT64260B:
-		s = "gt64260b";
-		break;
-	case MV64x60_TYPE_MV64360:
-		s = "mv64360";
-		break;
-	case MV64x60_TYPE_MV64460:
-		s = "mv64460";
-		break;
-	default:
-		s = "Unknown";
-	}
-	seq_printf(m, "bridge type\t: %s\n", s);
-	seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev);
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	seq_printf(m, "coherency\t: %s\n", "off");
-#else
-	seq_printf(m, "coherency\t: %s\n", "on");
-#endif
-
-	return 0;
-}
-
-static void __init
-cpci690_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = cpci690_get_bus_freq() / 4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC)
-static void __init
-cpci690_map_io(void)
-{
-	io_block_mapping(CONFIG_MV64X60_NEW_BASE, CONFIG_MV64X60_NEW_BASE,
-		128 * 1024, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = cpci690_setup_arch;
-	ppc_md.show_cpuinfo = cpci690_show_cpuinfo;
-	ppc_md.init_IRQ = gt64260_init_irq;
-	ppc_md.get_irq = gt64260_get_irq;
-	ppc_md.restart = cpci690_restart;
-	ppc_md.power_off = cpci690_power_off;
-	ppc_md.halt = cpci690_halt;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-	ppc_md.calibrate_decr = cpci690_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC)
-	ppc_md.setup_io_mappings = cpci690_map_io;
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-#endif	/* defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC) */
-
-#if defined(CONFIG_SERIAL_MPSC)
-	platform_notify = cpci690_platform_notify;
-#endif
-}
diff --git a/arch/ppc/platforms/cpci690.h b/arch/ppc/platforms/cpci690.h
deleted file mode 100644
index 0fa5a4c31b67..000000000000
--- a/arch/ppc/platforms/cpci690.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Definitions for Force CPCI690
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The GT64260 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- */
-
-#ifndef __PPC_PLATFORMS_CPCI690_H
-#define __PPC_PLATFORMS_CPCI690_H
-
-/*
- * Define bd_t to pass in the MAC addresses used by the GT64260's enet ctlrs.
- */
-#define	CPCI690_BI_MAGIC		0xFE8765DC
-
-typedef struct board_info {
-	u32	bi_magic;
-	u8	bi_enetaddr[3][6];
-} bd_t;
-
-/* PCI bus Resource setup */
-#define CPCI690_PCI0_MEM_START_PROC_ADDR	0x80000000
-#define CPCI690_PCI0_MEM_START_PCI_HI_ADDR	0x00000000
-#define CPCI690_PCI0_MEM_START_PCI_LO_ADDR	0x80000000
-#define CPCI690_PCI0_MEM_SIZE			0x10000000
-#define CPCI690_PCI0_IO_START_PROC_ADDR		0xa0000000
-#define CPCI690_PCI0_IO_START_PCI_ADDR		0x00000000
-#define CPCI690_PCI0_IO_SIZE			0x01000000
-
-#define CPCI690_PCI1_MEM_START_PROC_ADDR	0x90000000
-#define CPCI690_PCI1_MEM_START_PCI_HI_ADDR	0x00000000
-#define CPCI690_PCI1_MEM_START_PCI_LO_ADDR	0x90000000
-#define CPCI690_PCI1_MEM_SIZE			0x10000000
-#define CPCI690_PCI1_IO_START_PROC_ADDR		0xa1000000
-#define CPCI690_PCI1_IO_START_PCI_ADDR		0x01000000
-#define CPCI690_PCI1_IO_SIZE			0x01000000
-
-/* Board Registers */
-#define	CPCI690_BR_BASE				0xf0000000
-#define	CPCI690_BR_SIZE_ACTUAL			0x8
-#define	CPCI690_BR_SIZE			max(GT64260_WINDOW_SIZE_MIN,	\
-						CPCI690_BR_SIZE_ACTUAL)
-#define	CPCI690_BR_LED_CNTL			0x00
-#define	CPCI690_BR_SW_RESET			0x01
-#define	CPCI690_BR_MISC_STATUS			0x02
-#define	CPCI690_BR_SWITCH_STATUS		0x03
-#define	CPCI690_BR_MEM_CTLR			0x04
-#define	CPCI690_BR_LAST_RESET_1			0x05
-#define	CPCI690_BR_LAST_RESET_2			0x06
-
-#define	CPCI690_TODC_BASE			0xf0100000
-#define	CPCI690_TODC_SIZE_ACTUAL		0x8000 /* Size or NVRAM + RTC */
-#define	CPCI690_TODC_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						CPCI690_TODC_SIZE_ACTUAL)
-#define	CPCI690_MAC_OFFSET			0x7c10 /* MAC in RTC NVRAM */
-
-#define	CPCI690_IPMI_BASE			0xf0200000
-#define	CPCI690_IPMI_SIZE_ACTUAL		0x10 /* 16 bytes of IPMI */
-#define	CPCI690_IPMI_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						CPCI690_IPMI_SIZE_ACTUAL)
-
-#define	CPCI690_MPSC_BAUD			9600
-#define	CPCI690_MPSC_CLK_SRC			8 /* TCLK */
-
-#endif /* __PPC_PLATFORMS_CPCI690_H */
diff --git a/arch/ppc/platforms/est8260.h b/arch/ppc/platforms/est8260.h
deleted file mode 100644
index adba68ecf57b..000000000000
--- a/arch/ppc/platforms/est8260.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Board information for the EST8260, which should be generic for
- * all 8260 boards.  The IMMR is now given to us so the hard define
- * will soon be removed.  All of the clock values are computed from
- * the configuration SCMR and the Power-On-Reset word.
- */
-#ifndef __EST8260_PLATFORM
-#define __EST8260_PLATFORM
-
-#define CPM_MAP_ADDR		((uint)0xf0000000)
-
-#define BOOTROM_RESTART_ADDR	((uint)0xff000104)
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"EST Corporation"
-#define CPUINFO_MACHINE		"SBC8260 PowerPC"
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_cpmfreq;	/* CPM Freq, in MHz */
-	unsigned int	bi_brgfreq;	/* BRG Freq, in MHz */
-	unsigned int	bi_vco;		/* VCO Out from PLL */
-	unsigned int	bi_baudrate;	/* Default console baud rate */
-	unsigned int	bi_immr;	/* IMMR when called from boot rom */
-	unsigned char	bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-#endif 	/* __EST8260_PLATFORM */
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
deleted file mode 100644
index f522b31c46d7..000000000000
--- a/arch/ppc/platforms/ev64260.c
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- * Board setup routines for the Marvell/Galileo EV-64260-BP Evaluation Board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2003 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The EV-64260-BP port is the result of hard work from many people from
- * many companies.  In particular, employees of Marvell/Galileo, Mission
- * Critical Linux, Xyterra, and MontaVista Software were heavily involved.
- *
- * Note: I have not been able to get *all* PCI slots to work reliably
- *	at 66 MHz.  I recommend setting jumpers J15 & J16 to short pins 1&2
- *	so that 33 MHz is used. --MAG
- * Note: The 750CXe and 7450 are not stable with a 125MHz or 133MHz TCLK/SYSCLK.
- * 	At 100MHz, they are solid.
- */
-
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/platform_device.h>
-#if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#else
-#include <linux/mv643xx.h>
-#endif
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-#include <asm/mv64x60.h>
-#include <asm/todc.h>
-#include <asm/time.h>
-
-#include <platforms/ev64260.h>
-
-#define BOARD_VENDOR	"Marvell/Galileo"
-#define BOARD_MACHINE	"EV-64260-BP"
-
-static struct mv64x60_handle	bh;
-
-#if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-#endif
-
-static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */
-	18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
-};
-static const unsigned int cpu_745x[2][16] = { /* PLL_EXT 0 & 1 */
-	{ 1, 15, 14,  2,  4, 13,  5,  9,  6, 11,  8, 10, 16, 12,  7,  0 },
-	{ 0, 30,  0,  2,  0, 26,  0, 18,  0, 22, 20, 24, 28, 32,  0,  0 }
-};
-
-
-TODC_ALLOC();
-
-static int
-ev64260_get_bus_speed(void)
-{
-	return 100000000;
-}
-
-static int
-ev64260_get_cpu_speed(void)
-{
-	unsigned long	pvr, hid1, pll_ext;
-
-	pvr = PVR_VER(mfspr(SPRN_PVR));
-
-	if (pvr != PVR_VER(PVR_7450)) {
-		hid1 = mfspr(SPRN_HID1) >> 28;
-		return ev64260_get_bus_speed() * cpu_7xx[hid1]/2;
-	}
-	else {
-		hid1 = (mfspr(SPRN_HID1) & 0x0001e000) >> 13;
-		pll_ext = 0; /* No way to read; must get from schematic */
-		return ev64260_get_bus_speed() * cpu_745x[pll_ext][hid1]/2;
-	}
-}
-
-unsigned long __init
-ev64260_find_end_of_memory(void)
-{
-	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-		MV64x60_TYPE_GT64260A);
-}
-
-/*
- * Marvell/Galileo EV-64260-BP Evaluation Board PCI interrupt routing.
- * Note: By playing with J8 and JP1-4, you can get 2 IRQ's from the first
- *	PCI bus (in which cast, INTPIN B would be EV64260_PCI_1_IRQ).
- *	This is the most IRQs you can get from one bus with this board, though.
- */
-static int __init
-ev64260_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller	*hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 0 */
-			{EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 0 */
-		};
-
-		const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-	else {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{ EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 1 */
-			{ EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 1 */
-		};
-
-		const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-static void __init
-ev64260_setup_peripherals(void)
-{
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-		EV64260_EMB_FLASH_BASE, EV64260_EMB_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-		EV64260_EXT_SRAM_BASE, EV64260_EXT_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-		EV64260_TODC_BASE, EV64260_TODC_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-		EV64260_UART_BASE, EV64260_UART_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-		EV64260_EXT_FLASH_BASE, EV64260_EXT_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-	TODC_INIT(TODC_TYPE_DS1501, 0, 0,
-			ioremap(EV64260_TODC_BASE, EV64260_TODC_SIZE), 8);
-
-	mv64x60_clr_bits(&bh, MV64x60_CPU_CONFIG,((1<<12) | (1<<28) | (1<<29)));
-	mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<27));
-
-	if (ev64260_get_bus_speed() > 100000000)
-		mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<23));
-
-	mv64x60_set_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
-	mv64x60_set_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
-
-        /*
-         * Enabling of PCI internal-vs-external arbitration
-         * is a platform- and errata-dependent decision.
-         */
-        if (bh.type == MV64x60_TYPE_GT64260A )  {
-                mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
-                mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
-        }
-
-        mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
-
-	/*
-	 * Turn off timer/counters.  Not turning off watchdog timer because
-	 * can't read its reg on the 64260A so don't know if we'll be enabling
-	 * or disabling.
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-	mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-
-	/*
-	 * Set MPSC Multiplex RMII
-	 * NOTE: ethernet driver modifies bit 0 and 1
-	 */
-	mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-
-	/*
-	 * The EV-64260-BP uses several Multi-Purpose Pins (MPP) on the 64260
-	 * bridge as interrupt inputs (via the General Purpose Ports (GPP)
-	 * register).  Need to route the MPP inputs to the GPP and set the
-	 * polarity correctly.
-	 *
-	 * In MPP Control 2 Register
-	 *   MPP 21 -> GPP 21 (DUART channel A intr) bits 20-23 -> 0
-	 *   MPP 22 -> GPP 22 (DUART channel B intr) bits 24-27 -> 0
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_2, (0xf<<20) | (0xf<<24) );
-
-	/*
-	 * In MPP Control 3 Register
-	 *   MPP 26 -> GPP 26 (RTC INT)		bits  8-11 -> 0
-	 *   MPP 27 -> GPP 27 (PCI 0 INTA)	bits 12-15 -> 0
-	 *   MPP 29 -> GPP 29 (PCI 1 INTA)	bits 20-23 -> 0
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3, (0xf<<8)|(0xf<<12)|(0xf<<20));
-
-#define GPP_EXTERNAL_INTERRUPTS \
-		((1<<21) | (1<<22) | (1<<26) | (1<<27) | (1<<29))
-	/* DUART & PCI interrupts are inputs */
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
-	/* DUART & PCI interrupts are active low */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
-
-	/* Clear any pending interrupts for these inputs and enable them. */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
-
-	return;
-}
-
-static void __init
-ev64260_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int				i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = EV64260_PCI0_IO_CPU_BASE;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = EV64260_PCI0_IO_PCI_BASE;
-	si.pci_0.pci_io.size = EV64260_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = EV64260_PCI0_MEM_CPU_BASE;
-	si.pci_0.pci_mem[0].pci_base_hi = 0;
-	si.pci_0.pci_mem[0].pci_base_lo = EV64260_PCI0_MEM_PCI_BASE;
-	si.pci_0.pci_mem[0].size = EV64260_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x8;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = EV64260_PCI1_IO_CPU_BASE;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = EV64260_PCI1_IO_PCI_BASE;
-	si.pci_1.pci_io.size = EV64260_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = EV64260_PCI1_MEM_CPU_BASE;
-	si.pci_1.pci_mem[0].pci_base_hi = 0;
-	si.pci_1.pci_mem[0].pci_base_lo = EV64260_PCI1_MEM_PCI_BASE;
-	si.pci_1.pci_mem[0].size = EV64260_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x8;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		si.cpu_prot_options[i] = 0;
-		si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
-		si.pci_0.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-		si.pci_1.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-	}
-
-        /* Lookup PCI host bridges */
-        if (mv64x60_init(&bh, &si))
-                printk(KERN_ERR "Bridge initialization failed.\n");
-
-	pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ev64260_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-
-	return;
-}
-
-#if defined(CONFIG_SERIAL_8250) && !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64260_early_serial_map(void)
-{
-	struct uart_port	port;
-	static char		first_time = 1;
-
-	if (first_time) {
-		memset(&port, 0, sizeof(port));
-
-		port.membase = ioremap(EV64260_SERIAL_0, EV64260_UART_SIZE);
-		port.irq = EV64260_UART_0_IRQ;
-		port.uartclk = BASE_BAUD * 16;
-		port.regshift = 2;
-		port.iotype = UPIO_MEM;
-		port.flags = STD_COM_FLAGS;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-		gen550_init(0, &port);
-#endif
-
-		if (early_serial_setup(&port) != 0)
-			printk(KERN_WARNING "Early serial init of port 0 "
-				"failed\n");
-
-		first_time = 0;
-	}
-
-	return;
-}
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64260_early_serial_map(void)
-{
-}
-#endif
-
-static void __init
-ev64260_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: enter", 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: Enabling L2 cache", 0);
-
-	/* Enable L2 and L3 caches (if 745x) */
-	_set_L2CR(_get_L2CR() | L2CR_L2E);
-	_set_L3CR(_get_L3CR() | L3CR_L3E);
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: Initializing bridge", 0);
-
-	ev64260_setup_bridge();		/* set up PCI bridge(s) */
-	ev64260_setup_peripherals();	/* set up chip selects/GPP/MPP etc */
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: bridge init complete", 0);
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ev64260_early_serial_map();
-#endif
-
-	printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc. "
-		"(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: exit", 0);
-
-	return;
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-ev64260_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = EV64260_DEFAULT_BAUD;
-	pdata->brg_clk_src = EV64260_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = EV64260_MPSC_CLK_FREQ;
-
-	return;
-}
-
-static int
-ev64260_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-		{ MPSC_CTLR_NAME ".0", ev64260_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", ev64260_fixup_mpsc_pdata },
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-#endif
-
-static void
-ev64260_reset_board(void *addr)
-{
-	local_irq_disable();
-
-	/* disable and invalidate the L2 cache */
-	_set_L2CR(0);
-	_set_L2CR(0x200000);
-
-	/* flush and disable L1 I/D cache */
-	__asm__ __volatile__
-	("mfspr   3,1008\n\t"
-	 "ori	5,5,0xcc00\n\t"
-	 "ori	4,3,0xc00\n\t"
-	 "andc	5,3,5\n\t"
-	 "sync\n\t"
-	 "mtspr	1008,4\n\t"
-	 "isync\n\t"
-	 "sync\n\t"
-	 "mtspr	1008,5\n\t"
-	 "isync\n\t"
-	 "sync\n\t");
-
-	/* unmap any other random cs's that might overlap with bootcs */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-	/* map bootrom back in to gt @ reset defaults */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-						0xff800000, 8*1024*1024, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* move reg base back to default, setup default pci0 */
-	mv64x60_write(&bh, MV64x60_INTERNAL_SPACE_DECODE,
-		(1<<24) | CONFIG_MV64X60_BASE >> 20);
-
-	/* NOTE: FROM NOW ON no more GT_REGS accesses.. 0x1 is not mapped
-	 * via BAT or MMU, and MSR IR/DR is ON */
-	/* SRR0 has system reset vector, SRR1 has default MSR value */
-	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-	/* NOTE: assumes reset vector is at 0xfff00100 */
-	__asm__ __volatile__
-	("mtspr   26, %0\n\t"
-	 "li      4,(1<<6)\n\t"
-	 "mtspr   27,4\n\t"
-	 "rfi\n\t"
-	 :: "r" (addr):"r4");
-
-	return;
-}
-
-static void
-ev64260_restart(char *cmd)
-{
-	volatile ulong	i = 10000000;
-
-	ev64260_reset_board((void *)0xfff00100);
-
-	while (i-- > 0);
-	panic("restart failed\n");
-}
-
-static void
-ev64260_halt(void)
-{
-	local_irq_disable();
-	while (1);
-	/* NOTREACHED */
-}
-
-static void
-ev64260_power_off(void)
-{
-	ev64260_halt();
-	/* NOTREACHED */
-}
-
-static int
-ev64260_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid;
-
-	pvid = mfspr(SPRN_PVR);
-	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
-	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
-	seq_printf(m, "cpu MHz\t\t: %d\n", ev64260_get_cpu_speed()/1000/1000);
-	seq_printf(m, "bus MHz\t\t: %d\n", ev64260_get_bus_speed()/1000/1000);
-
-	return 0;
-}
-
-/* DS1501 RTC has too much variation to use RTC for calibration */
-static void __init
-ev64260_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = ev64260_get_bus_speed()/4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
-
-/*
- * Set BAT 3 to map 0xfb000000 to 0xfc000000 of physical memory space.
- */
-static __inline__ void
-ev64260_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xfb0001fe);
-	mtspr(SPRN_DBAT1L, 0xfb00002a);
-	mb();
-
-	return;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-static void __init
-ev64260_map_io(void)
-{
-	io_block_mapping(0xfb000000, 0xfb000000, 0x01000000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
-	extern int	initrd_below_start_ok;
-
-	initrd_start=initrd_end=0;
-	initrd_below_start_ok=0;
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	parse_bootinfo(find_bootinfo());
-
-	isa_mem_base = 0;
-	isa_io_base = EV64260_PCI0_IO_CPU_BASE;
-	pci_dram_offset = EV64260_PCI0_MEM_CPU_BASE;
-
-	loops_per_jiffy = ev64260_get_cpu_speed() / HZ;
-
-	ppc_md.setup_arch = ev64260_setup_arch;
-	ppc_md.show_cpuinfo = ev64260_show_cpuinfo;
-	ppc_md.init_IRQ = gt64260_init_irq;
-	ppc_md.get_irq = gt64260_get_irq;
-
-	ppc_md.restart = ev64260_restart;
-	ppc_md.power_off = ev64260_power_off;
-	ppc_md.halt = ev64260_halt;
-
-	ppc_md.find_end_of_memory = ev64260_find_end_of_memory;
-
-	ppc_md.init = NULL;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-	ppc_md.calibrate_decr = ev64260_calibrate_decr;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-
-	ev64260_set_bat();
-
-#ifdef	CONFIG_SERIAL_8250
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.progress = gen550_progress;
-#endif
-#if defined(CONFIG_KGDB)
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.early_serial_map = ev64260_early_serial_map;
-#endif
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#ifdef	CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef	CONFIG_KGDB
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.early_serial_map = ev64260_early_serial_map;
-#endif	/* CONFIG_KGDB */
-
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC)
-	platform_notify = ev64260_platform_notify;
-#endif
-
-	return;
-}
diff --git a/arch/ppc/platforms/ev64260.h b/arch/ppc/platforms/ev64260.h
deleted file mode 100644
index 44d90d56745a..000000000000
--- a/arch/ppc/platforms/ev64260.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Definitions for Marvell/Galileo EV-64260-BP Evaluation Board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The MV64x60 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 1MB and start
- * on a boundary that is a multiple of the window size):
- *
- * 	0xfc000000-0xffffffff		- External FLASH on device module
- * 	0xfbf00000-0xfbffffff		- Embedded (on board) FLASH
- * 	0xfbe00000-0xfbefffff		- GT64260 Registers (preferably)
- * 					  but really a config option
- * 	0xfbd00000-0xfbdfffff		- External SRAM on device module
- * 	0xfbc00000-0xfbcfffff		- TODC chip on device module
- * 	0xfbb00000-0xfbbfffff		- External UART on device module
- * 	0xa2000000-0xfbafffff		- <hole>
- * 	0xa1000000-0xa1ffffff		- PCI 1 I/O (defined in gt64260.h)
- * 	0xa0000000-0xa0ffffff		- PCI 0 I/O (defined in gt64260.h)
- * 	0x90000000-0x9fffffff		- PCI 1 MEM (defined in gt64260.h)
- * 	0x80000000-0x8fffffff		- PCI 0 MEM (defined in gt64260.h)
- */
-
-#ifndef __PPC_PLATFORMS_EV64260_H
-#define __PPC_PLATFORMS_EV64260_H
-
-/* PCI mappings */
-#define	EV64260_PCI0_IO_CPU_BASE	0xa0000000
-#define	EV64260_PCI0_IO_PCI_BASE	0x00000000
-#define	EV64260_PCI0_IO_SIZE		0x01000000
-
-#define	EV64260_PCI0_MEM_CPU_BASE	0x80000000
-#define	EV64260_PCI0_MEM_PCI_BASE	0x80000000
-#define	EV64260_PCI0_MEM_SIZE		0x10000000
-
-#define	EV64260_PCI1_IO_CPU_BASE	(EV64260_PCI0_IO_CPU_BASE + \
-						EV64260_PCI0_IO_SIZE)
-#define	EV64260_PCI1_IO_PCI_BASE	(EV64260_PCI0_IO_PCI_BASE + \
-						EV64260_PCI0_IO_SIZE)
-#define	EV64260_PCI1_IO_SIZE		0x01000000
-
-#define	EV64260_PCI1_MEM_CPU_BASE	(EV64260_PCI0_MEM_CPU_BASE + \
-						EV64260_PCI0_MEM_SIZE)
-#define	EV64260_PCI1_MEM_PCI_BASE	(EV64260_PCI0_MEM_PCI_BASE + \
-						EV64260_PCI0_MEM_SIZE)
-#define	EV64260_PCI1_MEM_SIZE		0x10000000
-
-/* CPU Physical Memory Map setup (other than PCI) */
-#define	EV64260_EXT_FLASH_BASE		0xfc000000
-#define	EV64260_EMB_FLASH_BASE		0xfbf00000
-#define	EV64260_EXT_SRAM_BASE		0xfbd00000
-#define	EV64260_TODC_BASE		0xfbc00000
-#define	EV64260_UART_BASE		0xfbb00000
-
-#define	EV64260_EXT_FLASH_SIZE_ACTUAL	0x04000000  /* <= 64MB Extern FLASH */
-#define	EV64260_EMB_FLASH_SIZE_ACTUAL	0x00080000  /* 512KB of Embed FLASH */
-#define	EV64260_EXT_SRAM_SIZE_ACTUAL	0x00100000  /* 1MB SDRAM */
-#define	EV64260_TODC_SIZE_ACTUAL	0x00000020  /* 32 bytes for TODC */
-#define	EV64260_UART_SIZE_ACTUAL	0x00000040  /* 64 bytes for DUART */
-
-#define	EV64260_EXT_FLASH_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_EXT_FLASH_SIZE_ACTUAL)
-#define	EV64260_EMB_FLASH_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_EMB_FLASH_SIZE_ACTUAL)
-#define	EV64260_EXT_SRAM_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_EXT_SRAM_SIZE_ACTUAL)
-#define	EV64260_TODC_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_TODC_SIZE_ACTUAL)
-/* Assembler in bootwrapper blows up if 'max' is used */
-#define	EV64260_UART_SIZE		GT64260_WINDOW_SIZE_MIN
-#define	EV64260_UART_END		((EV64260_UART_BASE +		\
-					EV64260_UART_SIZE - 1) & 0xfff00000)
-
-/* Board-specific IRQ info */
-#define	EV64260_UART_0_IRQ		85
-#define	EV64260_UART_1_IRQ		86
-#define	EV64260_PCI_0_IRQ		91
-#define	EV64260_PCI_1_IRQ		93
-
-/* Serial port setup */
-#define	EV64260_DEFAULT_BAUD		115200
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#define SERIAL_PORT_DFNS
-
-#define	EV64260_MPSC_CLK_SRC		8		/* TCLK */
-#define	EV64260_MPSC_CLK_FREQ		100000000	/* 100MHz clk */
-#else
-#define EV64260_SERIAL_0		(EV64260_UART_BASE + 0x20)
-#define EV64260_SERIAL_1		EV64260_UART_BASE
-
-#define BASE_BAUD	(EV64260_DEFAULT_BAUD * 2)
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE	64
-#else
-#define RS_TABLE_SIZE	2
-#endif
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-/* Required for bootloader's ns16550.c code */
-#define STD_SERIAL_PORT_DFNS 						\
-        { 0, BASE_BAUD, EV64260_SERIAL_0, EV64260_UART_0_IRQ, STD_COM_FLAGS, \
-	iomem_base: (u8 *)EV64260_SERIAL_0,	/* ttyS0 */		\
-	iomem_reg_shift: 2,						\
-	io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-#endif
-#endif /* __PPC_PLATFORMS_EV64260_H */
diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c
deleted file mode 100644
index 6765676a5c6b..000000000000
--- a/arch/ppc/platforms/ev64360.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- * Board setup routines for the Marvell EV-64360-BP Evaluation Board.
- *
- * Author: Lee Nicks <allinux@gmail.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/bootmem.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/smp.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-#include <platforms/ev64360.h>
-
-#define BOARD_VENDOR    "Marvell"
-#define BOARD_MACHINE   "EV-64360-BP"
-
-static struct		mv64x60_handle bh;
-static void __iomem	*sram_base;
-
-static u32		ev64360_flash_size_0;
-static u32		ev64360_flash_size_1;
-
-static u32		ev64360_bus_frequency;
-
-unsigned char	__res[sizeof(bd_t)];
-
-TODC_ALLOC();
-
-static int __init
-ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	return 0;
-}
-
-static void __init
-ev64360_setup_bridge(void)
-{
-	struct mv64x60_setup_info si;
-	int i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	#ifdef CONFIG_PCI
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = EV64360_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = EV64360_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = EV64360_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = EV64360_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = EV64360_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = EV64360_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = EV64360_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-	#else
-	si.pci_0.enable_bus = 0;
-	si.pci_1.enable_bus = 0;
-	#endif
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-	if (mv64x60_init(&bh, &si))
-		printk(KERN_WARNING "Bridge initialization failed.\n");
-
-	#ifdef CONFIG_PCI
-	pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ev64360_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 1, 0);
-	bh.hose_b->first_busno = 0;
-	bh.hose_b->last_busno = 0xff;
-	#endif
-}
-
-/* Bridge & platform setup routines */
-void __init
-ev64360_intr_setup(void)
-{
-	/* MPP 8, 9, and 10 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
-
-	/*
-	 * Define GPP 8,9,and 10 interrupt polarity as active low
-	 * input signal and level triggered
-	 */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
-
-	/* Config GPP intr ctlr to respond to level trigger */
-	mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
-
-	/* Erranum FEr PCI-#8 */
-	mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT25 summarizes GPP interrupts 8-15
-	 */
-	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
-}
-
-void __init
-ev64360_setup_peripherals(void)
-{
-	u32 base;
-
-	/* Set up window for boot CS */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-		 EV64360_BOOT_WINDOW_BASE, EV64360_BOOT_WINDOW_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* We only use the 32-bit flash */
-	mv64x60_get_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, &base,
-		&ev64360_flash_size_0);
-	ev64360_flash_size_1 = 0;
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-		 EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-
-	TODC_INIT(TODC_TYPE_DS1501, 0, 0,
-		ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-		 EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	sram_base = ioremap(EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-
-	/* Set up Enet->SRAM window */
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
-		EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
-	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-
-	/* Give enet r/w access to memory region */
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
-
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
-
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-
-	/*
-	 * Setting the SRAM to 0. Note that this generates parity errors on
-	 * internal data path in SRAM since it's first time accessing it
-	 * while after reset it's not configured.
-	 */
-	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/* set up PCI interrupt controller */
-	ev64360_intr_setup();
-}
-
-static void __init
-ev64360_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("ev64360_setup_arch: enter", 0);
-
-	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef   CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	/*
-	 * Set up the L2CR register.
-	 */
-	_set_L2CR(L2CR_L2E | L2CR_L2PE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64360_setup_arch: calling setup_bridge", 0);
-
-	ev64360_setup_bridge();
-	ev64360_setup_peripherals();
-	ev64360_bus_frequency = ev64360_bus_freq();
-
-	printk(KERN_INFO "%s %s port (C) 2005 Lee Nicks "
-		"(allinux@gmail.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-	if (ppc_md.progress)
-		ppc_md.progress("ev64360_setup_arch: exit", 0);
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-ev64360_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = EV64360_DEFAULT_BAUD;
-	pdata->brg_clk_src = EV64360_MPSC_CLK_SRC;
-	/*
-	 * TCLK (not SysCLk) is routed to BRG, then to the MPSC.  On most parts,
-	 * TCLK == SysCLK but on 64460, they are separate pins.
-	 * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
-	 */
-	pdata->brg_clk_freq = min(ev64360_bus_frequency, MV64x60_TCLK_FREQ_MAX);
-}
-#endif
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init
-ev64360_fixup_eth_pdata(struct platform_device *pdev)
-{
-	struct mv643xx_eth_platform_data *eth_pd;
-	static u16 phy_addr[] = {
-		EV64360_ETH0_PHY_ADDR,
-		EV64360_ETH1_PHY_ADDR,
-		EV64360_ETH2_PHY_ADDR,
-	};
-
-	eth_pd = pdev->dev.platform_data;
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = phy_addr[pdev->id];
-	eth_pd->tx_queue_size = EV64360_ETH_TX_QUEUE_SIZE;
-	eth_pd->rx_queue_size = EV64360_ETH_RX_QUEUE_SIZE;
-}
-#endif
-
-static int
-ev64360_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-#if defined(CONFIG_SERIAL_MPSC)
-		{ MPSC_CTLR_NAME ".0", ev64360_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", ev64360_fixup_mpsc_pdata },
-#endif
-#if defined(CONFIG_MV643XX_ETH)
-		{ MV643XX_ETH_NAME ".0", ev64360_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".1", ev64360_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".2", ev64360_fixup_eth_pdata },
-#endif
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-
-#ifndef MB
-#define MB	(1 << 20)
-#endif
-
-/*
- * MTD Layout.
- *
- * FLASH Amount:	0xff000000 - 0xffffffff
- * -------------	-----------------------
- * Reserved:		0xff000000 - 0xff03ffff
- * JFFS2 file system:	0xff040000 - 0xffefffff
- * U-boot:		0xfff00000 - 0xffffffff
- */
-static int __init
-ev64360_setup_mtd(void)
-{
-	u32	size;
-	int	ptbl_entries;
-	static struct mtd_partition	*ptbl;
-
-	size = ev64360_flash_size_0 + ev64360_flash_size_1;
-	if (!size)
-		return -ENOMEM;
-
-	ptbl_entries = 3;
-
-	if ((ptbl = kzalloc(ptbl_entries * sizeof(struct mtd_partition),
-		GFP_KERNEL)) == NULL) {
-
-		printk(KERN_WARNING "Can't alloc MTD partition table\n");
-		return -ENOMEM;
-	}
-
-	ptbl[0].name = "reserved";
-	ptbl[0].offset = 0;
-	ptbl[0].size = EV64360_MTD_RESERVED_SIZE;
-	ptbl[1].name = "jffs2";
-	ptbl[1].offset = EV64360_MTD_RESERVED_SIZE;
-	ptbl[1].size = EV64360_MTD_JFFS2_SIZE;
-	ptbl[2].name = "U-BOOT";
-	ptbl[2].offset = EV64360_MTD_RESERVED_SIZE + EV64360_MTD_JFFS2_SIZE;
-	ptbl[2].size = EV64360_MTD_UBOOT_SIZE;
-
-	physmap_map.size = size;
-	physmap_set_partitions(ptbl, ptbl_entries);
-	return 0;
-}
-
-arch_initcall(ev64360_setup_mtd);
-#endif
-
-static void
-ev64360_restart(char *cmd)
-{
-	ulong	i = 0xffffffff;
-	volatile unsigned char * rtc_base = ioremap(EV64360_RTC_WINDOW_BASE,0x4000);
-
-	/* issue hard reset */
-	rtc_base[0xf] = 0x80;
-	rtc_base[0xc] = 0x00;
-	rtc_base[0xd] = 0x01;
-	rtc_base[0xf] = 0x83;
-
-	while (i-- > 0) ;
-	panic("restart failed\n");
-}
-
-static void
-ev64360_halt(void)
-{
-	while (1) ;
-	/* NOTREACHED */
-}
-
-static void
-ev64360_power_off(void)
-{
-	ev64360_halt();
-	/* NOTREACHED */
-}
-
-static int
-ev64360_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
-	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
-	seq_printf(m, "bus speed\t: %dMHz\n", ev64360_bus_frequency/1000/1000);
-
-	return 0;
-}
-
-static void __init
-ev64360_calibrate_decr(void)
-{
-	u32 freq;
-
-	freq = ev64360_bus_frequency / 4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       (long)freq / 1000000, (long)freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-unsigned long __init
-ev64360_find_end_of_memory(void)
-{
-	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-		MV64x60_TYPE_MV64360);
-}
-
-static inline void
-ev64360_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT2U, 0xf0001ffe);
-	mtspr(SPRN_DBAT2L, 0xf000002a);
-	mb();
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64360_map_io(void)
-{
-	io_block_mapping(CONFIG_MV64X60_NEW_BASE, \
-			 CONFIG_MV64X60_NEW_BASE, \
-			 0x00020000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		/* copy board info structure */
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-		/* copy command line */
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-	#ifdef CONFIG_ISA
-	isa_mem_base = 0;
-	#endif
-
-	ppc_md.setup_arch = ev64360_setup_arch;
-	ppc_md.show_cpuinfo = ev64360_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.restart = ev64360_restart;
-	ppc_md.power_off = ev64360_power_off;
-	ppc_md.halt = ev64360_halt;
-	ppc_md.find_end_of_memory = ev64360_find_end_of_memory;
-	ppc_md.init = NULL;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-	ppc_md.calibrate_decr = ev64360_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ppc_md.setup_io_mappings = ev64360_map_io;
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
-	platform_notify = ev64360_platform_notify;
-#endif
-
-	ev64360_set_bat(); /* Need for ev64360_find_end_of_memory and progress */
-}
diff --git a/arch/ppc/platforms/ev64360.h b/arch/ppc/platforms/ev64360.h
deleted file mode 100644
index b30f4722690a..000000000000
--- a/arch/ppc/platforms/ev64360.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Definitions for Marvell EV-64360-BP Evaluation Board.
- *
- * Author: Lee Nicks <allinux@gmail.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64KB and start
- * on a boundary that is a multiple of the window size):
- *
- *    0x42000000-0x4203ffff      - Internal SRAM
- *    0xf1000000-0xf100ffff      - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
- *    0xfc800000-0xfcffffff      - RTC
- *    0xff000000-0xffffffff      - Boot window, 16 MB flash
- *    0xc0000000-0xc3ffffff      - PCI I/O (second hose)
- *    0x80000000-0xbfffffff      - PCI MEM (second hose)
- */
-
-#ifndef __PPC_PLATFORMS_EV64360_H
-#define __PPC_PLATFORMS_EV64360_H
-
-/* CPU Physical Memory Map setup. */
-#define EV64360_BOOT_WINDOW_BASE		0xff000000
-#define EV64360_BOOT_WINDOW_SIZE		0x01000000 /* 16 MB */
-#define EV64360_INTERNAL_SRAM_BASE		0x42000000
-#define EV64360_RTC_WINDOW_BASE			0xfc800000
-#define EV64360_RTC_WINDOW_SIZE			0x00800000 /* 8 MB */
-
-#define EV64360_PCI1_MEM_START_PROC_ADDR	0x80000000
-#define EV64360_PCI1_MEM_START_PCI_HI_ADDR	0x00000000
-#define EV64360_PCI1_MEM_START_PCI_LO_ADDR	0x80000000
-#define EV64360_PCI1_MEM_SIZE			0x40000000 /* 1 GB */
-#define EV64360_PCI1_IO_START_PROC_ADDR		0xc0000000
-#define EV64360_PCI1_IO_START_PCI_ADDR		0x00000000
-#define EV64360_PCI1_IO_SIZE			0x04000000 /* 64 MB */
-
-#define	EV64360_DEFAULT_BAUD			115200
-#define	EV64360_MPSC_CLK_SRC			8	  /* TCLK */
-#define EV64360_MPSC_CLK_FREQ			133333333
-
-#define	EV64360_MTD_RESERVED_SIZE		0x40000
-#define EV64360_MTD_JFFS2_SIZE			0xec0000
-#define EV64360_MTD_UBOOT_SIZE			0x100000
-
-#define	EV64360_ETH0_PHY_ADDR			8
-#define	EV64360_ETH1_PHY_ADDR			9
-#define	EV64360_ETH2_PHY_ADDR			10
-
-#define EV64360_ETH_TX_QUEUE_SIZE		800
-#define EV64360_ETH_RX_QUEUE_SIZE		400
-
-#define	EV64360_ETH_PORT_CONFIG_VALUE			\
-	ETH_UNICAST_NORMAL_MODE			|	\
-	ETH_DEFAULT_RX_QUEUE_0			|	\
-	ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
-	ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
-	ETH_RECEIVE_BC_IF_IP			|	\
-	ETH_RECEIVE_BC_IF_ARP			|	\
-	ETH_CAPTURE_TCP_FRAMES_DIS		|	\
-	ETH_CAPTURE_UDP_FRAMES_DIS		|	\
-	ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define	EV64360_ETH_PORT_CONFIG_EXTEND_VALUE		\
-	ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
-	ETH_PARTITION_DISABLE
-
-#define	GT_ETH_IPG_INT_RX(value)			\
-	((value & 0x3fff) << 8)
-
-#define	EV64360_ETH_PORT_SDMA_CONFIG_VALUE		\
-	ETH_RX_BURST_SIZE_4_64BIT		|	\
-	GT_ETH_IPG_INT_RX(0)			|	\
-	ETH_TX_BURST_SIZE_4_64BIT
-
-#define	EV64360_ETH_PORT_SERIAL_CONTROL_VALUE		\
-	ETH_FORCE_LINK_PASS			|	\
-	ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-	ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-	ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-	ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-	ETH_FORCE_BP_MODE_NO_JAM		|	\
-	BIT9					|	\
-	ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-	ETH_RETRANSMIT_16_ATTEMPTS		|	\
-	ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-	ETH_DTE_ADV_0				|	\
-	ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-	ETH_AUTO_NEG_NO_CHANGE			|	\
-	ETH_MAX_RX_PACKET_9700BYTE		|	\
-	ETH_CLR_EXT_LOOPBACK			|	\
-	ETH_SET_FULL_DUPLEX_MODE		|	\
-	ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-static inline u32
-ev64360_bus_freq(void)
-{
-	return 133333333;
-}
-
-#endif	/* __PPC_PLATFORMS_EV64360_H */
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
deleted file mode 100644
index 5219366667b3..000000000000
--- a/arch/ppc/platforms/fads.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola 860T FADS board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- *
- * Added MPC86XADS support.
- * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS
- * for SW point of view". This is 99% correct.
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- * 2005 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_FADS_H__
-#define __ASM_FADS_H__
-
-
-#include <asm/ppcboot.h>
-
-/* Memory map is configured by the PROM startup.
- * I tried to follow the FADS manual, although the startup PROM
- * dictates this and we simply have to move some of the physical
- * addresses for Linux.
- */
-#define BCSR_ADDR		((uint)0xff010000)
-
-/* PHY link change interrupt */
-#define PHY_INTERRUPT	SIU_IRQ2
-
-#define BCSR_SIZE		((uint)(64 * 1024))
-#define BCSR0			((uint)(BCSR_ADDR + 0x00))
-#define BCSR1			((uint)(BCSR_ADDR + 0x04))
-#define BCSR2			((uint)(BCSR_ADDR + 0x08))
-#define BCSR3			((uint)(BCSR_ADDR + 0x0c))
-#define BCSR4			((uint)(BCSR_ADDR + 0x10))
-
-#define IMAP_ADDR		((uint)0xff000000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-
-#define PCMCIA_MEM_ADDR		((uint)0xff020000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-
-/* Bits of interest in the BCSRs.
- */
-#define BCSR1_ETHEN		((uint)0x20000000)
-#define BCSR1_IRDAEN		((uint)0x10000000)
-#define BCSR1_RS232EN_1		((uint)0x01000000)
-#define BCSR1_PCCEN		((uint)0x00800000)
-#define BCSR1_PCCVCC0		((uint)0x00400000)
-#define BCSR1_PCCVPP0		((uint)0x00200000)
-#define BCSR1_PCCVPP1		((uint)0x00100000)
-#define BCSR1_PCCVPP_MASK	(BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
-#define BCSR1_RS232EN_2		((uint)0x00040000)
-#define BCSR1_PCCVCC1		((uint)0x00010000)
-#define BCSR1_PCCVCC_MASK	(BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
-
-#define BCSR4_ETHLOOP		((uint)0x80000000)	/* EEST Loopback */
-#define BCSR4_EEFDX		((uint)0x40000000)	/* EEST FDX enable */
-#define BCSR4_FETH_EN		((uint)0x08000000)	/* PHY enable */
-#define BCSR4_FETHCFG0		((uint)0x04000000)	/* PHY autoneg mode */
-#define BCSR4_FETHCFG1		((uint)0x00400000)	/* PHY autoneg mode */
-#define BCSR4_FETHFDE		((uint)0x02000000)	/* PHY FDX advertise */
-#define BCSR4_FETHRST		((uint)0x00200000)	/* PHY Reset */
-
-/* IO_BASE definition for pcmcia.
- */
-#define _IO_BASE	0x80000000
-#define _IO_BASE_SIZE	0x1000
-
-#ifdef CONFIG_IDE
-#define MAX_HWIFS 1
-#endif
-
-/* Interrupt level assignments.
- */
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-/* We don't use the 8259.
- */
-#define NR_8259_INTS	0
-
-/* CPM Ethernet through SCC1 or SCC2 */
-
-#if defined(CONFIG_SCC1_ENET) || defined(CONFIG_MPC8xx_SECOND_ETH_SCC1)		/* Probably 860 variant */
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- * TCLK - CLK1, RCLK - CLK2.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0100)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000002c)
-#endif /* CONFIG_SCC1_ENET */
-
-#ifdef CONFIG_SCC2_ENET		/* Probably 823/850 variant */
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- * TCLK - CLK1, RCLK - CLK2.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0400)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-/* Control bits in the SICR to route TCLK and RCLK to
- * SCC2.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002e00)
-#endif /* CONFIG_SCC2_ENET */
-
-#endif /* __ASM_FADS_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
deleted file mode 100644
index 904b518c152e..000000000000
--- a/arch/ppc/platforms/hdpu.c
+++ /dev/null
@@ -1,1015 +0,0 @@
-/*
- * Board setup routines for the Sky Computers HDPU Compute Blade.
- *
- * Written by Brian Waite <waite@skycomputers.com>
- *
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *                         Rabeeh Khoury - rabeeh@galileo.co.il
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <linux/platform_device.h>
-
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/smp.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <asm/mv64x60.h>
-#include <asm/ppcboot.h>
-#include <platforms/hdpu.h>
-#include <linux/mv643xx.h>
-#include <linux/hdpu_features.h>
-#include <linux/device.h>
-#include <linux/mtd/physmap.h>
-
-#define BOARD_VENDOR	"Sky Computers"
-#define BOARD_MACHINE	"HDPU-CB-A"
-
-bd_t ppcboot_bd;
-int ppcboot_bd_valid = 0;
-
-static mv64x60_handle_t bh;
-
-extern char cmd_line[];
-
-unsigned long hdpu_find_end_of_memory(void);
-void hdpu_mpsc_progress(char *s, unsigned short hex);
-void hdpu_heartbeat(void);
-
-static void parse_bootinfo(unsigned long r3,
-			   unsigned long r4, unsigned long r5,
-			   unsigned long r6, unsigned long r7);
-static void hdpu_set_l1pe(void);
-static void hdpu_cpustate_set(unsigned char new_state);
-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-extern int smp_tb_synchronized;
-
-void __devinit hdpu_tben_give(void);
-void __devinit hdpu_tben_take(void);
-#endif
-
-static int __init
-hdpu_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] = {
-			{HDPU_PCI_0_IRQ, 0, 0, 0},
-			{HDPU_PCI_0_IRQ, 0, 0, 0},
-		};
-
-		const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		static char pci_irq_table[][4] = {
-			{HDPU_PCI_1_IRQ, 0, 0, 0},
-		};
-
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-static void __init hdpu_intr_setup(void)
-{
-	mv64x60_write(&bh, MV64x60_GPP_IO_CNTL,
-		      (1 | (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) |
-		       (1 << 6) | (1 << 7) | (1 << 12) | (1 << 16) |
-		       (1 << 18) | (1 << 19) | (1 << 20) | (1 << 21) |
-		       (1 << 22) | (1 << 23) | (1 << 24) | (1 << 25) |
-		       (1 << 26) | (1 << 27) | (1 << 28) | (1 << 29)));
-
-	/* XXXX Erranum FEr PCI-#8 */
-	mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1 << 5) | (1 << 9));
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1 << 5) | (1 << 9));
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~((1 << 8) | (1 << 13)));
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, (1 << 8) | (1 << 13));
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT25 summarizes GPP interrupts 8-15
-	 */
-	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1 << 25));
-}
-
-static void __init hdpu_setup_peripherals(void)
-{
-	unsigned int val;
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-				 HDPU_EMB_FLASH_BASE, HDPU_EMB_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-				 HDPU_TBEN_BASE, HDPU_TBEN_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-				 HDPU_NEXUS_ID_BASE, HDPU_NEXUS_ID_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 HDPU_INTERNAL_SRAM_BASE,
-				 HDPU_INTERNAL_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	bh.ci->disable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN, 0, 0, 0);
-
-	mv64x60_clr_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
-
-	/* Enable pipelining */
-	mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1 << 13));
-	/* Enable Snoop Pipelining */
-	mv64x60_set_bits(&bh, MV64360_D_UNIT_CONTROL_HIGH, (1 << 24));
-
-	/*
-	 * Change DRAM read buffer assignment.
-	 * Assign read buffer 0 dedicated only for CPU,
-	 * and the rest read buffer 1.
-	 */
-	val = mv64x60_read(&bh, MV64360_SDRAM_CONFIG);
-	val = val & 0x03ffffff;
-	val = val | 0xf8000000;
-	mv64x60_write(&bh, MV64360_SDRAM_CONFIG, val);
-
-	/*
-	 * Configure internal SRAM -
-	 * Cache coherent write back, if CONFIG_MV64360_SRAM_CACHE_COHERENT set
-	 * Parity enabled.
-	 * Parity error propagation
-	 * Arbitration not parked for CPU only
-	 * Other bits are reserved.
-	 */
-#ifdef CONFIG_MV64360_SRAM_CACHE_COHERENT
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b0);
-#endif
-
-	hdpu_intr_setup();
-}
-
-static void __init hdpu_setup_bridge(void)
-{
-	struct mv64x60_setup_info si;
-	int i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = HDPU_BRIDGE_REG_BASE;
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = HDPU_PCI0_IO_START_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = HDPU_PCI0_IO_START_PCI_ADDR;
-	si.pci_0.pci_io.size = HDPU_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = HDPU_PCI0_MEM_START_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = HDPU_PCI0_MEM_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = HDPU_PCI0_MEM_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = HDPU_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = HDPU_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = HDPU_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = HDPU_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = HDPU_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = HDPU_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = HDPU_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = HDPU_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;	/* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;	/* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;	/* errata */
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#endif
-	}
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_INIT_PCI);
-
-	/* Lookup PCI host bridges */
-	mv64x60_init(&bh, &si);
-	pci_dram_offset = 0;	/* System mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = hdpu_map_irq;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_INIT_REG);
-	/*
-	 * Enabling of PCI internal-vs-external arbitration
-	 * is a platform- and errata-dependent decision.
-	 */
-	return;
-}
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init hdpu_early_serial_map(void)
-{
-#ifdef	CONFIG_KGDB
-	static char first_time = 1;
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#else
-#error "Invalid kgdb_tty port"
-#endif
-
-	if (first_time) {
-		gt_early_mpsc_init(KGDB_PORT,
-				   B9600 | CS8 | CREAD | HUPCL | CLOCAL);
-		first_time = 0;
-	}
-
-	return;
-#endif
-}
-#endif
-
-static void hdpu_init2(void)
-{
-	return;
-}
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init hdpu_fixup_eth_pdata(struct platform_device *pd)
-{
-
-	struct mv643xx_eth_platform_data *eth_pd;
-	eth_pd = pd->dev.platform_data;
-
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = pd->id;
-	eth_pd->speed = SPEED_100;
-	eth_pd->duplex = DUPLEX_FULL;
-	eth_pd->tx_queue_size = 400;
-	eth_pd->rx_queue_size = 800;
-}
-#endif
-
-static void __init hdpu_fixup_mpsc_pdata(struct platform_device *pd)
-{
-
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pd->dev.platform_data;
-
-	pdata->max_idle = 40;
-	if (ppcboot_bd_valid)
-		pdata->default_baud = ppcboot_bd.bi_baudrate;
-	else
-		pdata->default_baud = HDPU_DEFAULT_BAUD;
-	pdata->brg_clk_src = HDPU_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = HDPU_MPSC_CLK_FREQ;
-}
-
-#if defined(CONFIG_HDPU_FEATURES)
-static void __init hdpu_fixup_cpustate_pdata(struct platform_device *pd)
-{
-	struct platform_device *pds[1];
-	pds[0] = pd;
-	mv64x60_pd_fixup(&bh, pds, 1);
-}
-#endif
-
-static int hdpu_platform_notify(struct device *dev)
-{
-	static struct {
-		char *bus_id;
-		void ((*rtn) (struct platform_device * pdev));
-	} dev_map[] = {
-		{
-		MPSC_CTLR_NAME ".0", hdpu_fixup_mpsc_pdata},
-#if defined(CONFIG_MV643XX_ETH)
-		{
-		MV643XX_ETH_NAME ".0", hdpu_fixup_eth_pdata},
-#endif
-#if defined(CONFIG_HDPU_FEATURES)
-		{
-		HDPU_CPUSTATE_NAME ".0", hdpu_fixup_cpustate_pdata},
-#endif
-	};
-	struct platform_device *pdev;
-	int i;
-
-	if (dev && dev->bus_id)
-		for (i = 0; i < ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				     BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-						    struct platform_device,
-						    dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-static void __init hdpu_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: enter", 0);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	ppc_md.heartbeat = hdpu_heartbeat;
-
-	ppc_md.heartbeat_reset = HZ;
-	ppc_md.heartbeat_count = 1;
-
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: Enabling L2 cache", 0);
-
-	/* Enable L1 Parity Bits */
-	hdpu_set_l1pe();
-
-	/* Enable L2 and L3 caches (if 745x) */
-	_set_L2CR(0x80080000);
-
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: enter", 0);
-
-	hdpu_setup_bridge();
-
-	hdpu_setup_peripherals();
-
-#ifdef CONFIG_SERIAL_MPSC_CONSOLE
-	hdpu_early_serial_map();
-#endif
-
-	printk("SKY HDPU Compute Blade \n");
-
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: exit", 0);
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_OK);
-	return;
-}
-static void __init hdpu_init_irq(void)
-{
-	mv64360_init_irq();
-}
-
-static void __init hdpu_set_l1pe()
-{
-	unsigned long ictrl;
-	asm volatile ("mfspr %0, 1011":"=r" (ictrl):);
-	ictrl |= ICTRL_EICE | ICTRL_EDC | ICTRL_EICP;
-	asm volatile ("mtspr 1011, %0"::"r" (ictrl));
-}
-
-/*
- * Set BAT 1 to map 0xf1000000 to end of physical memory space.
- */
-static __inline__ void hdpu_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf10001fe);
-	mtspr(SPRN_DBAT1L, 0xf100002a);
-	mb();
-
-	return;
-}
-
-unsigned long __init hdpu_find_end_of_memory(void)
-{
-	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-				    MV64x60_TYPE_MV64360);
-}
-
-static void hdpu_reset_board(void)
-{
-	volatile int infinite = 1;
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_RESET);
-
-	local_irq_disable();
-
-	/* Clear all the LEDs */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, ((1 << 4) |
-						   (1 << 5) | (1 << 6)));
-
-	/* disable and invalidate the L2 cache */
-	_set_L2CR(0);
-	_set_L2CR(0x200000);
-
-	/* flush and disable L1 I/D cache */
-	__asm__ __volatile__
-	    ("\n"
-	     "mfspr   3,1008\n"
-	     "ori	5,5,0xcc00\n"
-	     "ori	4,3,0xc00\n"
-	     "andc	5,3,5\n"
-	     "sync\n"
-	     "mtspr	1008,4\n"
-	     "isync\n" "sync\n" "mtspr	1008,5\n" "isync\n" "sync\n");
-
-	/* Hit the reset bit */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, (1 << 3));
-
-	while (infinite)
-		infinite = infinite;
-
-	return;
-}
-
-static void hdpu_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	hdpu_reset_board();
-
-	while (i-- > 0) ;
-	panic("restart failed\n");
-}
-
-static void hdpu_halt(void)
-{
-	local_irq_disable();
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_HALT);
-
-	/* Clear all the LEDs */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, ((1 << 4) | (1 << 5) |
-						   (1 << 6)));
-	while (1) ;
-	/* NOTREACHED */
-}
-
-static void hdpu_power_off(void)
-{
-	hdpu_halt();
-	/* NOTREACHED */
-}
-
-static int hdpu_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid;
-
-	pvid = mfspr(SPRN_PVR);
-	seq_printf(m, "vendor\t\t: Sky Computers\n");
-	seq_printf(m, "machine\t\t: HDPU Compute Blade\n");
-	seq_printf(m, "PVID\t\t: 0x%x, vendor: %s\n",
-		   pvid, (pvid & (1 << 15) ? "IBM" : "Motorola"));
-
-	return 0;
-}
-
-static void __init hdpu_calibrate_decr(void)
-{
-	ulong freq;
-
-	if (ppcboot_bd_valid)
-		freq = ppcboot_bd.bi_busfreq / 4;
-	else
-		freq = 133000000;
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq / 1000000, freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
-
-static void parse_bootinfo(unsigned long r3,
-			   unsigned long r4, unsigned long r5,
-			   unsigned long r6, unsigned long r7)
-{
-	bd_t *bd = NULL;
-	char *cmdline_start = NULL;
-	int cmdline_len = 0;
-
-	if (r3) {
-		if ((r3 & 0xf0000000) == 0)
-			r3 += KERNELBASE;
-		if ((r3 & 0xf0000000) == KERNELBASE) {
-			bd = (void *)r3;
-
-			memcpy(&ppcboot_bd, bd, sizeof(ppcboot_bd));
-			ppcboot_bd_valid = 1;
-		}
-	}
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (r4 && r5 && r5 > r4) {
-		if ((r4 & 0xf0000000) == 0)
-			r4 += KERNELBASE;
-		if ((r5 & 0xf0000000) == 0)
-			r5 += KERNELBASE;
-		if ((r4 & 0xf0000000) == KERNELBASE) {
-			initrd_start = r4;
-			initrd_end = r5;
-			initrd_below_start_ok = 1;
-		}
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	if (r6 && r7 && r7 > r6) {
-		if ((r6 & 0xf0000000) == 0)
-			r6 += KERNELBASE;
-		if ((r7 & 0xf0000000) == 0)
-			r7 += KERNELBASE;
-		if ((r6 & 0xf0000000) == KERNELBASE) {
-			cmdline_start = (void *)r6;
-			cmdline_len = (r7 - r6);
-			strncpy(cmd_line, cmdline_start, cmdline_len);
-		}
-	}
-}
-
-void hdpu_heartbeat(void)
-{
-	if (mv64x60_read(&bh, MV64x60_GPP_VALUE) & (1 << 5))
-		mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, (1 << 5));
-	else
-		mv64x60_write(&bh, MV64x60_GPP_VALUE_SET, (1 << 5));
-
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-
-}
-
-static void __init hdpu_map_io(void)
-{
-	io_block_mapping(0xf1000000, 0xf1000000, 0x20000, _PAGE_IO);
-}
-
-#ifdef CONFIG_SMP
-char hdpu_smp0[] = "SMP Cpu #0";
-char hdpu_smp1[] = "SMP Cpu #1";
-
-static irqreturn_t hdpu_smp_cpu0_int_handler(int irq, void *dev_id)
-{
-	volatile unsigned int doorbell;
-
-	doorbell = mv64x60_read(&bh, MV64360_CPU0_DOORBELL);
-
-	/* Ack the doorbell interrupts */
-	mv64x60_write(&bh, MV64360_CPU0_DOORBELL_CLR, doorbell);
-
-	if (doorbell & 1) {
-		smp_message_recv(0);
-	}
-	if (doorbell & 2) {
-		smp_message_recv(1);
-	}
-	if (doorbell & 4) {
-		smp_message_recv(2);
-	}
-	if (doorbell & 8) {
-		smp_message_recv(3);
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t hdpu_smp_cpu1_int_handler(int irq, void *dev_id)
-{
-	volatile unsigned int doorbell;
-
-	doorbell = mv64x60_read(&bh, MV64360_CPU1_DOORBELL);
-
-	/* Ack the doorbell interrupts */
-	mv64x60_write(&bh, MV64360_CPU1_DOORBELL_CLR, doorbell);
-
-	if (doorbell & 1) {
-		smp_message_recv(0);
-	}
-	if (doorbell & 2) {
-		smp_message_recv(1);
-	}
-	if (doorbell & 4) {
-		smp_message_recv(2);
-	}
-	if (doorbell & 8) {
-		smp_message_recv(3);
-	}
-	return IRQ_HANDLED;
-}
-
-static void smp_hdpu_CPU_two(void)
-{
-	__asm__ __volatile__
-	    ("\n"
-	     "lis     3,0x0000\n"
-	     "ori     3,3,0x00c0\n"
-	     "mtspr   26, 3\n" "li      4,0\n" "mtspr   27,4\n" "rfi");
-
-}
-
-static int smp_hdpu_probe(void)
-{
-	int *cpu_count_reg;
-	int num_cpus = 0;
-
-	cpu_count_reg = ioremap(HDPU_NEXUS_ID_BASE, HDPU_NEXUS_ID_SIZE);
-	if (cpu_count_reg) {
-		num_cpus = (*cpu_count_reg >> 20) & 0x3;
-		iounmap(cpu_count_reg);
-	}
-
-	/* Validate the bits in the CPLD. If we could not map the reg, return 2.
-	 * If the register reported 0 or 3, return 2.
-	 * Older CPLD revisions set these bits to all ones (val = 3).
-	 */
-	if ((num_cpus < 1) || (num_cpus > 2)) {
-		printk
-		    ("Unable to determine the number of processors %d . deafulting to 2.\n",
-		     num_cpus);
-		num_cpus = 2;
-	}
-	return num_cpus;
-}
-
-static void
-smp_hdpu_message_pass(int target, int msg)
-{
-	if (msg > 0x3) {
-		printk("SMP %d: smp_message_pass: unknown msg %d\n",
-		       smp_processor_id(), msg);
-		return;
-	}
-	switch (target) {
-	case MSG_ALL:
-		mv64x60_write(&bh, MV64360_CPU0_DOORBELL, 1 << msg);
-		mv64x60_write(&bh, MV64360_CPU1_DOORBELL, 1 << msg);
-		break;
-	case MSG_ALL_BUT_SELF:
-		if (smp_processor_id())
-			mv64x60_write(&bh, MV64360_CPU0_DOORBELL, 1 << msg);
-		else
-			mv64x60_write(&bh, MV64360_CPU1_DOORBELL, 1 << msg);
-		break;
-	default:
-		if (target == 0)
-			mv64x60_write(&bh, MV64360_CPU0_DOORBELL, 1 << msg);
-		else
-			mv64x60_write(&bh, MV64360_CPU1_DOORBELL, 1 << msg);
-		break;
-	}
-}
-
-static void smp_hdpu_kick_cpu(int nr)
-{
-	volatile unsigned int *bootaddr;
-
-	if (ppc_md.progress)
-		ppc_md.progress("smp_hdpu_kick_cpu", 0);
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_CPU1_KICK);
-
-       /* Disable BootCS. Must also reduce the windows size to zero. */
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, 0, 0, 0);
-
-	bootaddr = ioremap(HDPU_INTERNAL_SRAM_BASE, HDPU_INTERNAL_SRAM_SIZE);
-	if (!bootaddr) {
-		if (ppc_md.progress)
-			ppc_md.progress("smp_hdpu_kick_cpu: ioremap failed", 0);
-		return;
-	}
-
-	memcpy((void *)(bootaddr + 0x40), (void *)&smp_hdpu_CPU_two, 0x20);
-
-	/* map SRAM to 0xfff00000 */
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 0xfff00000, HDPU_INTERNAL_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	/* Enable CPU1 arbitration */
-	mv64x60_clr_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1 << 9));
-
-	/*
-	 * Wait 100mSecond until other CPU has reached __secondary_start.
-	 * When it reaches, it is permittable to rever the SRAM mapping etc...
-	 */
-	mdelay(100);
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory");
-
-	iounmap(bootaddr);
-
-	/* Set up window for internal sram (256KByte insize) */
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 HDPU_INTERNAL_SRAM_BASE,
-				 HDPU_INTERNAL_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	/*
-	 * Set up windows for embedded FLASH (using boot CS window).
-	 */
-
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-				 HDPU_EMB_FLASH_BASE, HDPU_EMB_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-}
-
-static void smp_hdpu_setup_cpu(int cpu_nr)
-{
-	if (cpu_nr == 0) {
-		if (ppc_md.progress)
-			ppc_md.progress("smp_hdpu_setup_cpu 0", 0);
-		mv64x60_write(&bh, MV64360_CPU0_DOORBELL_CLR, 0xff);
-		mv64x60_write(&bh, MV64360_CPU0_DOORBELL_MASK, 0xff);
-		request_irq(60, hdpu_smp_cpu0_int_handler,
-			    IRQF_DISABLED, hdpu_smp0, 0);
-	}
-
-	if (cpu_nr == 1) {
-		if (ppc_md.progress)
-			ppc_md.progress("smp_hdpu_setup_cpu 1", 0);
-
-		hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR |
-				  CPUSTATE_KERNEL_CPU1_OK);
-
-		/* Enable L1 Parity Bits */
-		hdpu_set_l1pe();
-
-		/* Enable L2 cache */
-		_set_L2CR(0);
-		_set_L2CR(0x80080000);
-
-		mv64x60_write(&bh, MV64360_CPU1_DOORBELL_CLR, 0x0);
-		mv64x60_write(&bh, MV64360_CPU1_DOORBELL_MASK, 0xff);
-		request_irq(28, hdpu_smp_cpu1_int_handler,
-			    IRQF_DISABLED, hdpu_smp1, 0);
-	}
-
-}
-
-void __devinit hdpu_tben_give()
-{
-	volatile unsigned long *val = 0;
-
-	/* By writing 0 to the TBEN_BASE, the timebases is frozen */
-	val = ioremap(HDPU_TBEN_BASE, 4);
-	*val = 0;
-	mb();
-
-	spin_lock(&timebase_lock);
-	timebase_upper = get_tbu();
-	timebase_lower = get_tbl();
-	spin_unlock(&timebase_lock);
-
-	while (timebase_upper || timebase_lower)
-		barrier();
-
-	/* By writing 1 to the TBEN_BASE, the timebases is thawed */
-	*val = 1;
-	mb();
-
-	iounmap(val);
-
-}
-
-void __devinit hdpu_tben_take()
-{
-	while (!(timebase_upper || timebase_lower))
-		barrier();
-
-	spin_lock(&timebase_lock);
-	set_tb(timebase_upper, timebase_lower);
-	timebase_upper = 0;
-	timebase_lower = 0;
-	spin_unlock(&timebase_lock);
-}
-
-static struct smp_ops_t hdpu_smp_ops = {
-	.message_pass = smp_hdpu_message_pass,
-	.probe = smp_hdpu_probe,
-	.kick_cpu = smp_hdpu_kick_cpu,
-	.setup_cpu = smp_hdpu_setup_cpu,
-	.give_timebase = hdpu_tben_give,
-	.take_timebase = hdpu_tben_take,
-};
-#endif				/* CONFIG_SMP */
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(r3, r4, r5, r6, r7);
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = hdpu_setup_arch;
-	ppc_md.init = hdpu_init2;
-	ppc_md.show_cpuinfo = hdpu_show_cpuinfo;
-	ppc_md.init_IRQ = hdpu_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.restart = hdpu_restart;
-	ppc_md.power_off = hdpu_power_off;
-	ppc_md.halt = hdpu_halt;
-	ppc_md.find_end_of_memory = hdpu_find_end_of_memory;
-	ppc_md.calibrate_decr = hdpu_calibrate_decr;
-	ppc_md.setup_io_mappings = hdpu_map_io;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-	bh.v_base = (unsigned long *)bh.p_base;
-
-	hdpu_set_bat();
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = hdpu_mpsc_progress;	/* embedded UART */
-	mv64x60_progress_init(bh.p_base);
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-
-#ifdef CONFIG_SMP
-	smp_ops = &hdpu_smp_ops;
-#endif				/* CONFIG_SMP */
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
-	platform_notify = hdpu_platform_notify;
-#endif
-	return;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-/* SMP safe version of the serial text debug routine. Uses Semaphore 0 */
-void hdpu_mpsc_progress(char *s, unsigned short hex)
-{
-	while (mv64x60_read(&bh, MV64360_WHO_AM_I) !=
-	       mv64x60_read(&bh, MV64360_SEMAPHORE_0)) {
-	}
-	mv64x60_mpsc_progress(s, hex);
-	mv64x60_write(&bh, MV64360_SEMAPHORE_0, 0xff);
-}
-#endif
-
-static void hdpu_cpustate_set(unsigned char new_state)
-{
-	unsigned int state = (new_state << 21);
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, (0xff << 21));
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, state);
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition hdpu_partitions[] = {
-	{
-	 .name = "Root FS",
-	 .size = 0x03400000,
-	 .offset = 0,
-	 .mask_flags = 0,
-	 },{
-	 .name = "User FS",
-	 .size = 0x00800000,
-	 .offset = 0x03400000,
-	 .mask_flags = 0,
-	 },{
-	 .name = "Kernel Image",
-	 .size = 0x002C0000,
-	 .offset = 0x03C00000,
-	 .mask_flags = 0,
-	 },{
-	 .name = "bootEnv",
-	 .size = 0x00040000,
-	 .offset = 0x03EC0000,
-	 .mask_flags = 0,
-	 },{
-	 .name = "bootROM",
-	 .size = 0x00100000,
-	 .offset = 0x03F00000,
-	 .mask_flags = 0,
-	 }
-};
-
-static int __init hdpu_setup_mtd(void)
-{
-
-	physmap_set_partitions(hdpu_partitions, 5);
-	return 0;
-}
-
-arch_initcall(hdpu_setup_mtd);
-#endif
-
-#ifdef CONFIG_HDPU_FEATURES
-
-static struct resource hdpu_cpustate_resources[] = {
-	[0] = {
-	       .name = "addr base",
-	       .start = MV64x60_GPP_VALUE_SET,
-	       .end = MV64x60_GPP_VALUE_CLR + 1,
-	       .flags = IORESOURCE_MEM,
-	       },
-};
-
-static struct resource hdpu_nexus_resources[] = {
-	[0] = {
-	       .name = "nexus register",
-	       .start = HDPU_NEXUS_ID_BASE,
-	       .end = HDPU_NEXUS_ID_BASE + HDPU_NEXUS_ID_SIZE,
-	       .flags = IORESOURCE_MEM,
-	       },
-};
-
-static struct platform_device hdpu_cpustate_device = {
-	.name = HDPU_CPUSTATE_NAME,
-	.id = 0,
-	.num_resources = ARRAY_SIZE(hdpu_cpustate_resources),
-	.resource = hdpu_cpustate_resources,
-};
-
-static struct platform_device hdpu_nexus_device = {
-	.name = HDPU_NEXUS_NAME,
-	.id = 0,
-	.num_resources = ARRAY_SIZE(hdpu_nexus_resources),
-	.resource = hdpu_nexus_resources,
-};
-
-static int __init hdpu_add_pds(void)
-{
-	platform_device_register(&hdpu_cpustate_device);
-	platform_device_register(&hdpu_nexus_device);
-	return 0;
-}
-
-arch_initcall(hdpu_add_pds);
-#endif
diff --git a/arch/ppc/platforms/hdpu.h b/arch/ppc/platforms/hdpu.h
deleted file mode 100644
index f9e020b6970c..000000000000
--- a/arch/ppc/platforms/hdpu.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Definitions for Sky Computers HDPU board.
- *
- * Brian Waite <waite@skycomputers.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- * Based on code done by  Tim Montgomery <timm@artesyncp.com>
- *
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64K and start
- * on a boundary that is a multiple of the window size):
- *
- *    0x80000000-0x8fffffff	 - PCI 0 MEM
- *    0xa0000000-0xafffffff	 - PCI 1 MEM
- *    0xc0000000-0xc0ffffff	 - PCI 0 I/O
- *    0xc1000000-0xc1ffffff	 - PCI 1 I/O
-
- *    0xf1000000-0xf100ffff      - MV64360 Registers
- *    0xf1010000-0xfb9fffff      - HOLE
- *    0xfbfa0000-0xfbfaffff      - TBEN
- *    0xfbf00000-0xfbfbffff      - NEXUS
- *    0xfbfc0000-0xfbffffff      - Internal SRAM
- *    0xfc000000-0xffffffff      - Boot window
- */
-
-#ifndef __PPC_PLATFORMS_HDPU_H
-#define __PPC_PLATFORMS_HDPU_H
-
-/* CPU Physical Memory Map setup. */
-#define	HDPU_BRIDGE_REG_BASE		     0xf1000000
-
-#define HDPU_TBEN_BASE                        0xfbfa0000
-#define HDPU_TBEN_SIZE                        0x00010000
-#define HDPU_NEXUS_ID_BASE                    0xfbfb0000
-#define HDPU_NEXUS_ID_SIZE                    0x00010000
-#define HDPU_INTERNAL_SRAM_BASE               0xfbfc0000
-#define HDPU_INTERNAL_SRAM_SIZE               0x00040000
-#define	HDPU_EMB_FLASH_BASE		      0xfc000000
-#define	HDPU_EMB_FLASH_SIZE      	      0x04000000
-
-/* PCI Mappings */
-
-#define HDPU_PCI0_MEM_START_PROC_ADDR         0x80000000
-#define HDPU_PCI0_MEM_START_PCI_HI_ADDR       0x00000000
-#define HDPU_PCI0_MEM_START_PCI_LO_ADDR       HDPU_PCI0_MEM_START_PROC_ADDR
-#define HDPU_PCI0_MEM_SIZE                    0x10000000
-
-#define HDPU_PCI1_MEM_START_PROC_ADDR         0xc0000000
-#define HDPU_PCI1_MEM_START_PCI_HI_ADDR       0x00000000
-#define HDPU_PCI1_MEM_START_PCI_LO_ADDR       HDPU_PCI1_MEM_START_PROC_ADDR
-#define HDPU_PCI1_MEM_SIZE                    0x20000000
-
-#define HDPU_PCI0_IO_START_PROC_ADDR          0xc0000000
-#define HDPU_PCI0_IO_START_PCI_ADDR           0x00000000
-#define HDPU_PCI0_IO_SIZE                     0x01000000
-
-#define HDPU_PCI1_IO_START_PROC_ADDR          0xc1000000
-#define HDPU_PCI1_IO_START_PCI_ADDR           0x01000000
-#define HDPU_PCI1_IO_SIZE                     0x01000000
-
-#define HDPU_DEFAULT_BAUD 115200
-#define HDPU_MPSC_CLK_SRC 8	/* TCLK */
-#define HDPU_MPSC_CLK_FREQ 133000000	/* 133 Mhz */
-
-#define	HDPU_PCI_0_IRQ		(8+64)
-#define	HDPU_PCI_1_IRQ		(13+64)
-
-#endif				/* __PPC_PLATFORMS_HDPU_H */
diff --git a/arch/ppc/platforms/hermes.h b/arch/ppc/platforms/hermes.h
deleted file mode 100644
index de91afff8ca1..000000000000
--- a/arch/ppc/platforms/hermes.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Multidata HERMES-PRO ( / SL ) board specific definitions
- *
- * Copyright (c) 2000, 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_HERMES_H
-#define __MACH_HERMES_H
-
-
-#include <asm/ppcboot.h>
-
-#define	HERMES_IMMR_BASE    0xFF000000	/* phys. addr of IMMR			*/
-#define	HERMES_IMAP_SIZE   (64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR     HERMES_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE     HERMES_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-#define	FEC_INTERRUPT	 9		/* = SIU_LEVEL4				*/
-#define	CPM_INTERRUPT	11		/* = SIU_LEVEL5 (was: SIU_LEVEL2)	*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_HERMES_H */
diff --git a/arch/ppc/platforms/ip860.h b/arch/ppc/platforms/ip860.h
deleted file mode 100644
index 2f1f86ce1447..000000000000
--- a/arch/ppc/platforms/ip860.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * MicroSys IP860 VMEBus board specific definitions
- *
- * Copyright (c) 2000, 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_IP860_H
-#define __MACH_IP860_H
-
-
-#include <asm/ppcboot.h>
-
-#define	IP860_IMMR_BASE	0xF1000000	/* phys. addr of IMMR			*/
-#define	IP860_IMAP_SIZE	(64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR	IP860_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE	IP860_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-/*
- * MPC8xx Chip Select Usage
- */
-#define	IP860_BOOT_CS		0	/* Boot (VMEBus or Flash) Chip Select 0	*/
-#define IP860_FLASH_CS		1	/* Flash	    is on Chip Select 1	*/
-#define IP860_SDRAM_CS		2	/* SDRAM	    is on Chip Select 2	*/
-#define	IP860_SRAM_CS		3	/* SRAM		    is on Chip Select 3	*/
-#define IP860_BCSR_CS		4	/* BCSR		    is on Chip Select 4	*/
-#define IP860_IP_CS		5	/* IP Slots	   are on Chip Select 5	*/
-#define IP860_VME_STD_CS	6	/* VME Standard I/O is on Chip Select 6	*/
-#define IP860_VME_SHORT_CS	7	/* VME Short    I/O is on Chip Select 7	*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_IP860_H */
diff --git a/arch/ppc/platforms/ivms8.h b/arch/ppc/platforms/ivms8.h
deleted file mode 100644
index 9109e684ad9b..000000000000
--- a/arch/ppc/platforms/ivms8.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Speech Design Integrated Voicemail board specific definitions
- * - IVMS8  (small,  8 channels)
- * - IVML24 (large, 24 channels)
- *
- * In 2.5 when we force a new bootloader, we can merge these two, and add
- * in _MACH_'s for them. -- Tom
- *
- * Copyright (c) 2000, 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IVMS8_H__
-#define __ASM_IVMS8_H__
-
-
-#include <asm/ppcboot.h>
-
-#define IVMS_IMMR_BASE	0xFFF00000	/* phys. addr of IMMR */
-#define IVMS_IMAP_SIZE	(64 * 1024)	/* size of mapped area */
-
-#define IMAP_ADDR	IVMS_IMMR_BASE	/* phys. base address of IMMR area */
-#define IMAP_SIZE	IVMS_IMAP_SIZE	/* mapped size of IMMR area */
-
-#define PCMCIA_MEM_ADDR	((uint)0xFE100000)
-#define PCMCIA_MEM_SIZE	((uint)(64 * 1024))
-
-#define FEC_INTERRUPT	 9		/* = SIU_LEVEL4 */
-#define IDE0_INTERRUPT	10		/* = IRQ5 */
-#define CPM_INTERRUPT	11		/* = SIU_LEVEL5 (was: SIU_LEVEL2) */
-#define PHY_INTERRUPT	12		/* = IRQ6 */
-
-/* override the default number of IDE hardware interfaces */
-#define MAX_HWIFS	1
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET		0x0000	/* Offset in PCMCIA memory */
-#define IDE0_DATA_REG_OFFSET		0x0000
-#define IDE0_ERROR_REG_OFFSET		0x0081
-#define IDE0_NSECTOR_REG_OFFSET		0x0082
-#define IDE0_SECTOR_REG_OFFSET		0x0083
-#define IDE0_LCYL_REG_OFFSET		0x0084
-#define IDE0_HCYL_REG_OFFSET		0x0085
-#define IDE0_SELECT_REG_OFFSET		0x0086
-#define IDE0_STATUS_REG_OFFSET		0x0087
-#define IDE0_CONTROL_REG_OFFSET		0x0106
-#define IDE0_IRQ_REG_OFFSET		0x000A	/* not used */
-
-/* We don't use the 8259. */
-#define NR_8259_INTS	0
-
-#endif /* __ASM_IVMS8_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c
deleted file mode 100644
index fe6e88cdb1cd..000000000000
--- a/arch/ppc/platforms/katana.c
+++ /dev/null
@@ -1,902 +0,0 @@
-/*
- * Board setup routines for the Artesyn Katana cPCI boards.
- *
- * Author: Tim Montgomery <timm@artesyncp.com>
- * Maintained by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-/*
- * Supports the Artesyn 750i, 752i, and 3750.  The 752i is virtually identical
- * to the 750i except that it has an mv64460 bridge.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/unistd.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/smp.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-#include <asm/mv64x60.h>
-#include <platforms/katana.h>
-#include <asm/machdep.h>
-
-static struct mv64x60_handle	bh;
-static katana_id_t		katana_id;
-static void __iomem		*cpld_base;
-static void __iomem		*sram_base;
-static u32			katana_flash_size_0;
-static u32			katana_flash_size_1;
-static u32			katana_bus_frequency;
-static struct pci_controller	katana_hose_a;
-
-unsigned char	__res[sizeof(bd_t)];
-
-/* PCI Interrupt routing */
-static int __init
-katana_irq_lookup_750i(unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 *       A   B   C   D
-		 */
-		/* IDSEL 4  (PMC 1) */
-		{ KATANA_PCI_INTB_IRQ_750i, KATANA_PCI_INTC_IRQ_750i,
-			KATANA_PCI_INTD_IRQ_750i, KATANA_PCI_INTA_IRQ_750i },
-		/* IDSEL 5  (PMC 2) */
-		{ KATANA_PCI_INTC_IRQ_750i, KATANA_PCI_INTD_IRQ_750i,
-			KATANA_PCI_INTA_IRQ_750i, KATANA_PCI_INTB_IRQ_750i },
-		/* IDSEL 6 (T8110) */
-		{KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
-		/* IDSEL 7 (unused) */
-		{0, 0, 0, 0 },
-		/* IDSEL 8 (Intel 82544) (752i only but doesn't harm 750i) */
-		{KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
-	};
-	const long min_idsel = 4, max_idsel = 8, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static int __init
-katana_irq_lookup_3750(unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 *       A   B   C   D
-		 */
-		{ KATANA_PCI_INTA_IRQ_3750, 0, 0, 0 }, /* IDSEL 3 (BCM5691) */
-		{ KATANA_PCI_INTB_IRQ_3750, 0, 0, 0 }, /* IDSEL 4 (MV64360 #2)*/
-		{ KATANA_PCI_INTC_IRQ_3750, 0, 0, 0 }, /* IDSEL 5 (MV64360 #3)*/
-	};
-	const long min_idsel = 3, max_idsel = 5, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static int __init
-katana_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	switch (katana_id) {
-	case KATANA_ID_750I:
-	case KATANA_ID_752I:
-		return katana_irq_lookup_750i(idsel, pin);
-
-	case KATANA_ID_3750:
-		return katana_irq_lookup_3750(idsel, pin);
-
-	default:
-		printk(KERN_ERR "Bogus board ID\n");
-		return 0;
-	}
-}
-
-/* Board info retrieval routines */
-void __init
-katana_get_board_id(void)
-{
-	switch (in_8(cpld_base + KATANA_CPLD_PRODUCT_ID)) {
-	case KATANA_PRODUCT_ID_3750:
-		katana_id = KATANA_ID_3750;
-		break;
-
-	case KATANA_PRODUCT_ID_750i:
-		katana_id = KATANA_ID_750I;
-		break;
-
-	case KATANA_PRODUCT_ID_752i:
-		katana_id = KATANA_ID_752I;
-		break;
-
-	default:
-		printk(KERN_ERR "Unsupported board\n");
-	}
-}
-
-int __init
-katana_get_proc_num(void)
-{
-	u16		val;
-	u8		save_exclude;
-	static int	proc = -1;
-	static u8	first_time = 1;
-
-	if (first_time) {
-		if (katana_id != KATANA_ID_3750)
-			proc = 0;
-		else {
-			save_exclude = mv64x60_pci_exclude_bridge;
-			mv64x60_pci_exclude_bridge = 0;
-
-			early_read_config_word(bh.hose_b, 0,
-				PCI_DEVFN(0,0), PCI_DEVICE_ID, &val);
-
-			mv64x60_pci_exclude_bridge = save_exclude;
-
-			switch(val) {
-			case PCI_DEVICE_ID_KATANA_3750_PROC0:
-				proc = 0;
-				break;
-
-			case PCI_DEVICE_ID_KATANA_3750_PROC1:
-				proc = 1;
-				break;
-
-			case PCI_DEVICE_ID_KATANA_3750_PROC2:
-				proc = 2;
-				break;
-
-			default:
-				printk(KERN_ERR "Bogus Device ID\n");
-			}
-		}
-
-		first_time = 0;
-	}
-
-	return proc;
-}
-
-static inline int
-katana_is_monarch(void)
-{
-	return in_8(cpld_base + KATANA_CPLD_BD_CFG_3) &
-		KATANA_CPLD_BD_CFG_3_MONARCH;
-}
-
-static void __init
-katana_setup_bridge(void)
-{
-	struct pci_controller hose;
-	struct mv64x60_setup_info si;
-	void __iomem *vaddr;
-	int i;
-	u32 v;
-	u16 val, type;
-	u8 save_exclude;
-
-	/*
-	 * Some versions of the Katana firmware mistakenly change the vendor
-	 * & device id fields in the bridge's pci device (visible via pci
-	 * config accesses).  This breaks mv64x60_init() because those values
-	 * are used to identify the type of bridge that's there.  Artesyn
-	 * claims that the subsystem vendor/device id's will have the correct
-	 * Marvell values so this code puts back the correct values from there.
-	 */
-	memset(&hose, 0, sizeof(hose));
-	vaddr = ioremap(CONFIG_MV64X60_NEW_BASE, MV64x60_INTERNAL_SPACE_SIZE);
-	setup_indirect_pci_nomap(&hose, vaddr + MV64x60_PCI0_CONFIG_ADDR,
-		vaddr + MV64x60_PCI0_CONFIG_DATA);
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID, &val);
-
-	if (val != PCI_VENDOR_ID_MARVELL) {
-		early_read_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_SUBSYSTEM_VENDOR_ID, &val);
-		early_write_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_VENDOR_ID, val);
-		early_read_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_SUBSYSTEM_ID, &val);
-		early_write_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_DEVICE_ID, val);
-	}
-
-	/*
-	 * While we're in here, set the hotswap register correctly.
-	 * Turn off blue LED; mask ENUM#, clear insertion & extraction bits.
-	 */
-	early_read_config_dword(&hose, 0, PCI_DEVFN(0, 0),
-		MV64360_PCICFG_CPCI_HOTSWAP, &v);
-	v &= ~(1<<19);
-	v |= ((1<<17) | (1<<22) | (1<<23));
-	early_write_config_dword(&hose, 0, PCI_DEVFN(0, 0),
-		MV64360_PCICFG_CPCI_HOTSWAP, v);
-
-	/* While we're at it, grab the bridge type for later */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &type);
-
-	mv64x60_pci_exclude_bridge = save_exclude;
-	iounmap(vaddr);
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = KATANA_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = KATANA_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = KATANA_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = KATANA_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = KATANA_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = KATANA_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = KATANA_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-			MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-			MV64360_PCI_ACC_CNTL_SWAP_NONE |
-			MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-			MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;
-
-		si.pci_1.acc_cntl_options[i] =
-			MV64360_PCI_ACC_CNTL_SNOOP_WB |
-			MV64360_PCI_ACC_CNTL_SWAP_NONE |
-			MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-			((type == PCI_DEVICE_ID_MARVELL_MV64360) ?
-				MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES :
-				MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES);
-#endif
-	}
-
-	/* Lookup PCI host bridges */
-	if (mv64x60_init(&bh, &si))
-		printk(KERN_WARNING "Bridge initialization failed.\n");
-
-	pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = katana_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 1, 0);
-	bh.hose_b->first_busno = 0;
-	bh.hose_b->last_busno = 0xff;
-
-	/*
-	 * Need to access hotswap reg which is in the pci config area of the
-	 * bridge's hose 0.  Note that pcibios_alloc_controller() can't be used
-	 * to alloc hose_a b/c that would make hose 0 known to the generic
-	 * pci code which we don't want.
-	 */
-	bh.hose_a = &katana_hose_a;
-	setup_indirect_pci_nomap(bh.hose_a,
-		bh.v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh.v_base + MV64x60_PCI0_CONFIG_DATA);
-}
-
-/* Bridge & platform setup routines */
-void __init
-katana_intr_setup(void)
-{
-	if (bh.type == MV64x60_TYPE_MV64460) /* As per instns from Marvell */
-		mv64x60_clr_bits(&bh, MV64x60_CPU_MASTER_CNTL, 1 << 15);
-
-	/* MPP 8, 9, and 10 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
-
-	/* MPP 14 */
-	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I))
-		mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0x0f000000);
-
-	/*
-	 * Define GPP 8,9,and 10 interrupt polarity as active low
-	 * input signal and level triggered
-	 */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
-
-	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) {
-		mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, (1<<14));
-		mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, (1<<14));
-	}
-
-	/* Config GPP intr ctlr to respond to level trigger */
-	mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
-
-	if (bh.type == MV64x60_TYPE_MV64360) {
-		/* Erratum FEr PCI-#9 */
-		mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD,
-				(1<<4) | (1<<5) | (1<<6) | (1<<7));
-		mv64x60_set_bits(&bh, MV64x60_PCI1_CMD, (1<<8) | (1<<9));
-	} else {
-		mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<6) | (1<<7));
-		mv64x60_set_bits(&bh, MV64x60_PCI1_CMD,
-				(1<<4) | (1<<5) | (1<<8) | (1<<9));
-	}
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
-
-	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) {
-		mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~(1<<14));
-		mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, (1<<14));
-	}
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT25 summarizes GPP interrupts 8-15
-	 */
-	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
-}
-
-void __init
-katana_setup_peripherals(void)
-{
-	u32 base;
-
-	/* Set up windows for boot CS, soldered & socketed flash, and CPLD */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-		 KATANA_BOOT_WINDOW_BASE, KATANA_BOOT_WINDOW_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* Assume firmware set up window sizes correctly for dev 0 & 1 */
-	mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, &base,
-		&katana_flash_size_0);
-
-	if (katana_flash_size_0 > 0) {
-		mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-			 KATANA_SOLDERED_FLASH_BASE, katana_flash_size_0, 0);
-		bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	}
-
-	mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, &base,
-		&katana_flash_size_1);
-
-	if (katana_flash_size_1 > 0) {
-		mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-			 (KATANA_SOLDERED_FLASH_BASE + katana_flash_size_0),
-			 katana_flash_size_1, 0);
-		bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	}
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-		 KATANA_SOCKET_BASE, KATANA_SOCKETED_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-		 KATANA_CPLD_BASE, KATANA_CPLD_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-	cpld_base = ioremap(KATANA_CPLD_BASE, KATANA_CPLD_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-		 KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	sram_base = ioremap(KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-
-	/* Set up Enet->SRAM window */
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
-		KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
-	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-
-	/* Give enet r/w access to memory region */
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
-
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
-
-	/* Must wait until window set up before retrieving board id */
-	katana_get_board_id();
-
-	/* Enumerate pci bus (must know board id before getting proc number) */
-	if (katana_get_proc_num() == 0)
-		bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b, 0);
-
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-
-	/*
-	 * Setting the SRAM to 0. Note that this generates parity errors on
-	 * internal data path in SRAM since it's first time accessing it
-	 * while after reset it's not configured.
-	 */
-	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/* Only processor zero [on 3750] is an PCI interrupt controller */
-	if (katana_get_proc_num() == 0)
-		katana_intr_setup();
-}
-
-static void __init
-katana_enable_ipmi(void)
-{
-	u8 reset_out;
-
-	/* Enable access to IPMI ctlr by clearing IPMI PORTSEL bit in CPLD */
-	reset_out = in_8(cpld_base + KATANA_CPLD_RESET_OUT);
-	reset_out &= ~KATANA_CPLD_RESET_OUT_PORTSEL;
-	out_8(cpld_base + KATANA_CPLD_RESET_OUT, reset_out);
-}
-
-static void __init
-katana_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("katana_setup_arch: enter", 0);
-
-	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef   CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	/*
-	 * Set up the L2CR register.
-	 *
-	 * 750FX has only L2E, L2PE (bits 2-8 are reserved)
-	 * DD2.0 has bug that requires the L2 to be in WRT mode
-	 * avoid dirty data in cache
-	 */
-	if (PVR_REV(mfspr(SPRN_PVR)) == 0x0200) {
-		printk(KERN_INFO "DD2.0 detected. Setting L2 cache"
-			"to Writethrough mode\n");
-		_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2WT);
-	} else
-		_set_L2CR(L2CR_L2E | L2CR_L2PE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("katana_setup_arch: calling setup_bridge", 0);
-
-	katana_setup_bridge();
-	katana_setup_peripherals();
-	katana_enable_ipmi();
-
-	katana_bus_frequency = katana_bus_freq(cpld_base);
-
-	printk(KERN_INFO "Artesyn Communication Products, LLC - Katana(TM)\n");
-	if (ppc_md.progress)
-		ppc_md.progress("katana_setup_arch: exit", 0);
-}
-
-void
-katana_fixup_resources(struct pci_dev *dev)
-{
-	u16	v16;
-
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES>>2);
-
-	pci_read_config_word(dev, PCI_COMMAND, &v16);
-	v16 |= PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK;
-	pci_write_config_word(dev, PCI_COMMAND, v16);
-}
-
-static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */
-	 0,  0,  2,  2,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,/* 0-15*/
-	16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40,  0 /*16-31*/
-};
-
-static int
-katana_get_cpu_freq(void)
-{
-	unsigned long	pll_cfg;
-
-	pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27;
-	return katana_bus_frequency * cpu_750xx[pll_cfg]/2;
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-katana_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-	bd_t *bdp = (bd_t *)__res;
-
-	if (bdp->bi_baudrate)
-		pdata->default_baud = bdp->bi_baudrate;
-	else
-		pdata->default_baud = KATANA_DEFAULT_BAUD;
-
-	pdata->max_idle = 40;
-	pdata->brg_clk_src = KATANA_MPSC_CLK_SRC;
-	/*
-	 * TCLK (not SysCLk) is routed to BRG, then to the MPSC.  On most parts,
-	 * TCLK == SysCLK but on 64460, they are separate pins.
-	 * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
-	 */
-	pdata->brg_clk_freq = min(katana_bus_frequency, MV64x60_TCLK_FREQ_MAX);
-}
-#endif
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init
-katana_fixup_eth_pdata(struct platform_device *pdev)
-{
-	struct mv643xx_eth_platform_data *eth_pd;
-	static u16 phy_addr[] = {
-		KATANA_ETH0_PHY_ADDR,
-		KATANA_ETH1_PHY_ADDR,
-		KATANA_ETH2_PHY_ADDR,
-	};
-
-	eth_pd = pdev->dev.platform_data;
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = phy_addr[pdev->id];
-	eth_pd->tx_queue_size = KATANA_ETH_TX_QUEUE_SIZE;
-	eth_pd->rx_queue_size = KATANA_ETH_RX_QUEUE_SIZE;
-}
-#endif
-
-#if defined(CONFIG_SYSFS)
-static void __init
-katana_fixup_mv64xxx_pdata(struct platform_device *pdev)
-{
-	struct mv64xxx_pdata *pdata = (struct mv64xxx_pdata *)
-		pdev->dev.platform_data;
-
-	/* Katana supports the mv64xxx hotswap register */
-	pdata->hs_reg_valid = 1;
-}
-#endif
-
-static int
-katana_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-#if defined(CONFIG_SERIAL_MPSC)
-		{ MPSC_CTLR_NAME ".0", katana_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", katana_fixup_mpsc_pdata },
-#endif
-#if defined(CONFIG_MV643XX_ETH)
-		{ MV643XX_ETH_NAME ".0", katana_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".1", katana_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".2", katana_fixup_eth_pdata },
-#endif
-#if defined(CONFIG_SYSFS)
-		{ MV64XXX_DEV_NAME ".0", katana_fixup_mv64xxx_pdata },
-#endif
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-					BUS_ID_SIZE)) {
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-
-#ifndef MB
-#define MB	(1 << 20)
-#endif
-
-/*
- * MTD Layout depends on amount of soldered FLASH in system. Sizes in MB.
- *
- * FLASH Amount:	128	64	32	16
- * -------------	---	--	--	--
- * Monitor:		1	1	1	1
- * Primary Kernel:	1.5	1.5	1.5	1.5
- * Primary fs:		30	30	<end>	<end>
- * Secondary Kernel:	1.5	1.5	N/A	N/A
- * Secondary fs:	<end>	<end>	N/A	N/A
- * User: 		<overlays entire FLASH except for "Monitor" section>
- */
-static int __init
-katana_setup_mtd(void)
-{
-	u32	size;
-	int	ptbl_entries;
-	static struct mtd_partition	*ptbl;
-
-	size = katana_flash_size_0 + katana_flash_size_1;
-	if (!size)
-		return -ENOMEM;
-
-	ptbl_entries = (size >= (64*MB)) ? 6 : 4;
-
-	if ((ptbl = kcalloc(ptbl_entries, sizeof(struct mtd_partition),
-			GFP_KERNEL)) == NULL) {
-		printk(KERN_WARNING "Can't alloc MTD partition table\n");
-		return -ENOMEM;
-	}
-
-	ptbl[0].name = "Monitor";
-	ptbl[0].size = KATANA_MTD_MONITOR_SIZE;
-	ptbl[1].name = "Primary Kernel";
-	ptbl[1].offset = MTDPART_OFS_NXTBLK;
-	ptbl[1].size = 0x00180000; /* 1.5 MB */
-	ptbl[2].name = "Primary Filesystem";
-	ptbl[2].offset = MTDPART_OFS_APPEND;
-	ptbl[2].size = MTDPART_SIZ_FULL; /* Correct for 16 & 32 MB */
-	ptbl[ptbl_entries-1].name = "User FLASH";
-	ptbl[ptbl_entries-1].offset = KATANA_MTD_MONITOR_SIZE;
-	ptbl[ptbl_entries-1].size = MTDPART_SIZ_FULL;
-
-	if (size >= (64*MB)) {
-		ptbl[2].size = 30*MB;
-		ptbl[3].name = "Secondary Kernel";
-		ptbl[3].offset = MTDPART_OFS_NXTBLK;
-		ptbl[3].size = 0x00180000; /* 1.5 MB */
-		ptbl[4].name = "Secondary Filesystem";
-		ptbl[4].offset = MTDPART_OFS_APPEND;
-		ptbl[4].size = MTDPART_SIZ_FULL;
-	}
-
-	physmap_map.size = size;
-	physmap_set_partitions(ptbl, ptbl_entries);
-	return 0;
-}
-arch_initcall(katana_setup_mtd);
-#endif
-
-static void
-katana_restart(char *cmd)
-{
-	ulong	i = 10000000;
-
-	/* issue hard reset to the reset command register */
-	out_8(cpld_base + KATANA_CPLD_RST_CMD, KATANA_CPLD_RST_CMD_HR);
-
-	while (i-- > 0) ;
-	panic("restart failed\n");
-}
-
-static void
-katana_halt(void)
-{
-	u8	v;
-
-	/* Turn on blue LED to indicate its okay to remove */
-	if (katana_id == KATANA_ID_750I) {
-		u32	v;
-		u8	save_exclude;
-
-		/* Set LOO bit in cPCI HotSwap reg of hose 0 to turn on LED. */
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_read_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, &v);
-		v &= 0xff;
-		v |= (1 << 19);
-		early_write_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, v);
-		mv64x60_pci_exclude_bridge = save_exclude;
-	} else if (katana_id == KATANA_ID_752I) {
-		   v = in_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF);
-		   v |= HSL_PLD_HOT_SWAP_LED_BIT;
-		   out_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF, v);
-	}
-
-	while (1) ;
-	/* NOTREACHED */
-}
-
-static void
-katana_power_off(void)
-{
-	katana_halt();
-	/* NOTREACHED */
-}
-
-static int
-katana_show_cpuinfo(struct seq_file *m)
-{
-	char	*s;
-
-	seq_printf(m, "cpu freq\t: %dMHz\n",
-		(katana_get_cpu_freq() + 500000) / 1000000);
-	seq_printf(m, "bus freq\t: %ldMHz\n",
-		((long)katana_bus_frequency + 500000) / 1000000);
-	seq_printf(m, "vendor\t\t: Artesyn Communication Products, LLC\n");
-
-	seq_printf(m, "board\t\t: ");
-	switch (katana_id) {
-	case KATANA_ID_3750:
-		seq_printf(m, "Katana 3750");
-		break;
-
-	case KATANA_ID_750I:
-		seq_printf(m, "Katana 750i");
-		break;
-
-	case KATANA_ID_752I:
-		seq_printf(m, "Katana 752i");
-		break;
-
-	default:
-		seq_printf(m, "Unknown");
-		break;
-	}
-	seq_printf(m, " (product id: 0x%x)\n",
-		   in_8(cpld_base + KATANA_CPLD_PRODUCT_ID));
-
-	seq_printf(m, "pci mode\t: %sMonarch\n",
-		katana_is_monarch()? "" : "Non-");
-	seq_printf(m, "hardware rev\t: 0x%x\n",
-		   in_8(cpld_base+KATANA_CPLD_HARDWARE_VER));
-	seq_printf(m, "pld rev\t\t: 0x%x\n",
-		   in_8(cpld_base + KATANA_CPLD_PLD_VER));
-
-	switch(bh.type) {
-	case MV64x60_TYPE_GT64260A:
-		s = "gt64260a";
-		break;
-	case MV64x60_TYPE_GT64260B:
-		s = "gt64260b";
-		break;
-	case MV64x60_TYPE_MV64360:
-		s = "mv64360";
-		break;
-	case MV64x60_TYPE_MV64460:
-		s = "mv64460";
-		break;
-	default:
-		s = "Unknown";
-	}
-	seq_printf(m, "bridge type\t: %s\n", s);
-	seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev);
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	seq_printf(m, "coherency\t: %s\n", "off");
-#else
-	seq_printf(m, "coherency\t: %s\n", "on");
-#endif
-
-	return 0;
-}
-
-static void __init
-katana_calibrate_decr(void)
-{
-	u32 freq;
-
-	freq = katana_bus_frequency / 4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       (long)freq / 1000000, (long)freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-/*
- * The katana supports both uImage and zImage.  If uImage, get the mem size
- * from the bd info.  If zImage, the bootwrapper adds a BI_MEMSIZE entry in
- * the bi_rec data which is sucked out and put into boot_mem_size by
- * parse_bootinfo().  MMU_init() will then use the boot_mem_size for the mem
- * size and not call this routine.  The only way this will fail is when a uImage
- * is used but the fw doesn't pass in a valid bi_memsize.  This should never
- * happen, though.
- */
-unsigned long __init
-katana_find_end_of_memory(void)
-{
-	bd_t *bdp = (bd_t *)__res;
-	return bdp->bi_memsize;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-katana_map_io(void)
-{
-	io_block_mapping(0xf8100000, 0xf8100000, 0x00020000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		/* copy board info structure */
-		memcpy((void *)__res, (void *)(r3+KERNELBASE), sizeof(bd_t));
-		/* copy command line */
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = katana_setup_arch;
-	ppc_md.pcibios_fixup_resources = katana_fixup_resources;
-	ppc_md.show_cpuinfo = katana_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.restart = katana_restart;
-	ppc_md.power_off = katana_power_off;
-	ppc_md.halt = katana_halt;
-	ppc_md.find_end_of_memory = katana_find_end_of_memory;
-	ppc_md.calibrate_decr = katana_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ppc_md.setup_io_mappings = katana_map_io;
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
-	platform_notify = katana_platform_notify;
-#endif
-}
diff --git a/arch/ppc/platforms/katana.h b/arch/ppc/platforms/katana.h
deleted file mode 100644
index 0a9b036526b1..000000000000
--- a/arch/ppc/platforms/katana.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Definitions for Artesyn Katana750i/3750 board.
- *
- * Author: Tim Montgomery <timm@artesyncp.com>
- * Maintained by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64 KB and start
- * on a boundary that is a multiple of the window size):
- *
- *    0xff800000-0xffffffff      - Boot window
- *    0xf8400000-0xf843ffff      - Internal SRAM
- *    0xf8200000-0xf83fffff      - CPLD
- *    0xf8100000-0xf810ffff      - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
- *    0xf8000000-0xf80fffff      - Socketed FLASH
- *    0xe0000000-0xefffffff      - Soldered FLASH
- *    0xc0000000-0xc3ffffff      - PCI I/O (second hose)
- *    0x80000000-0xbfffffff      - PCI MEM (second hose)
- */
-
-#ifndef __PPC_PLATFORMS_KATANA_H
-#define __PPC_PLATFORMS_KATANA_H
-
-/* CPU Physical Memory Map setup. */
-#define KATANA_BOOT_WINDOW_BASE			0xff800000
-#define KATANA_BOOT_WINDOW_SIZE			0x00800000 /* 8 MB */
-#define KATANA_INTERNAL_SRAM_BASE		0xf8400000
-#define KATANA_CPLD_BASE			0xf8200000
-#define KATANA_CPLD_SIZE			0x00200000 /* 2 MB */
-#define KATANA_SOCKET_BASE			0xf8000000
-#define KATANA_SOCKETED_FLASH_SIZE		0x00100000 /* 1 MB */
-#define KATANA_SOLDERED_FLASH_BASE		0xe0000000
-#define KATANA_SOLDERED_FLASH_SIZE		0x10000000 /* 256 MB */
-
-#define KATANA_PCI1_MEM_START_PROC_ADDR         0x80000000
-#define KATANA_PCI1_MEM_START_PCI_HI_ADDR       0x00000000
-#define KATANA_PCI1_MEM_START_PCI_LO_ADDR       0x80000000
-#define KATANA_PCI1_MEM_SIZE                    0x40000000 /* 1 GB */
-#define KATANA_PCI1_IO_START_PROC_ADDR          0xc0000000
-#define KATANA_PCI1_IO_START_PCI_ADDR           0x00000000
-#define KATANA_PCI1_IO_SIZE                     0x04000000 /* 64 MB */
-
-/* Board-specific IRQ info */
-#define  KATANA_PCI_INTA_IRQ_3750		(64+8)
-#define  KATANA_PCI_INTB_IRQ_3750		(64+9)
-#define  KATANA_PCI_INTC_IRQ_3750		(64+10)
-
-#define  KATANA_PCI_INTA_IRQ_750i		(64+8)
-#define  KATANA_PCI_INTB_IRQ_750i		(64+9)
-#define  KATANA_PCI_INTC_IRQ_750i		(64+10)
-#define  KATANA_PCI_INTD_IRQ_750i		(64+14)
-
-#define KATANA_CPLD_RST_EVENT			0x00000000
-#define KATANA_CPLD_RST_CMD			0x00001000
-#define KATANA_CPLD_PCI_ERR_INT_EN		0x00002000
-#define KATANA_CPLD_PCI_ERR_INT_PEND		0x00003000
-#define KATANA_CPLD_PRODUCT_ID			0x00004000
-#define KATANA_CPLD_EREADY			0x00005000
-
-#define KATANA_CPLD_HARDWARE_VER		0x00007000
-#define KATANA_CPLD_PLD_VER			0x00008000
-#define KATANA_CPLD_BD_CFG_0			0x00009000
-#define KATANA_CPLD_BD_CFG_1			0x0000a000
-#define KATANA_CPLD_BD_CFG_3			0x0000c000
-#define KATANA_CPLD_LED				0x0000d000
-#define KATANA_CPLD_RESET_OUT			0x0000e000
-
-#define KATANA_CPLD_RST_EVENT_INITACT		0x80
-#define KATANA_CPLD_RST_EVENT_SW		0x40
-#define KATANA_CPLD_RST_EVENT_WD		0x20
-#define KATANA_CPLD_RST_EVENT_COPS		0x10
-#define KATANA_CPLD_RST_EVENT_COPH		0x08
-#define KATANA_CPLD_RST_EVENT_CPCI		0x02
-#define KATANA_CPLD_RST_EVENT_FP		0x01
-
-#define KATANA_CPLD_RST_CMD_SCL			0x80
-#define KATANA_CPLD_RST_CMD_SDA			0x40
-#define KATANA_CPLD_RST_CMD_I2C			0x10
-#define KATANA_CPLD_RST_CMD_FR			0x08
-#define KATANA_CPLD_RST_CMD_SR			0x04
-#define KATANA_CPLD_RST_CMD_HR			0x01
-
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_MASK	0xc0
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_200		0x00
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_166		0x80
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_133		0xc0
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_100		0x40
-
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_MASK	0x03
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_16MB	0x00
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_32MB	0x01
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_64MB	0x02
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_128MB	0x03
-
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_MASK	0x04
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_ONE	0x00
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_TWO	0x04
-
-#define KATANA_CPLD_BD_CFG_3_MONARCH		0x04
-
-#define KATANA_CPLD_RESET_OUT_PORTSEL		0x80
-#define KATANA_CPLD_RESET_OUT_WD		0x20
-#define KATANA_CPLD_RESET_OUT_COPH		0x08
-#define KATANA_CPLD_RESET_OUT_PCI_RST_PCI	0x02
-#define KATANA_CPLD_RESET_OUT_PCI_RST_FP	0x01
-
-#define KATANA_MBOX_RESET_REQUEST		0xC83A
-#define KATANA_MBOX_RESET_ACK			0xE430
-#define KATANA_MBOX_RESET_DONE			0x32E5
-
-#define HSL_PLD_BASE				0x00010000
-#define HSL_PLD_J4SGA_REG_OFF			0
-#define HSL_PLD_J4GA_REG_OFF			1
-#define HSL_PLD_J2GA_REG_OFF			2
-#define HSL_PLD_HOT_SWAP_OFF			6
-#define HSL_PLD_HOT_SWAP_LED_BIT		0x1
-#define GA_MASK					0x1f
-#define HSL_PLD_SIZE				0x1000
-#define K3750_GPP_GEO_ADDR_PINS			0xf8000000
-#define K3750_GPP_GEO_ADDR_SHIFT		27
-
-#define K3750_GPP_EVENT_PROC_0			(1 << 21)
-#define K3750_GPP_EVENT_PROC_1_2		(1 << 2)
-
-#define PCI_VENDOR_ID_ARTESYN			0x1223
-#define PCI_DEVICE_ID_KATANA_3750_PROC0		0x0041
-#define PCI_DEVICE_ID_KATANA_3750_PROC1		0x0042
-#define PCI_DEVICE_ID_KATANA_3750_PROC2		0x0043
-
-#define COPROC_MEM_FUNCTION			0
-#define COPROC_MEM_BAR				0
-#define COPROC_REGS_FUNCTION			0
-#define COPROC_REGS_BAR				4
-#define COPROC_FLASH_FUNCTION			2
-#define COPROC_FLASH_BAR			4
-
-#define KATANA_IPMB_LOCAL_I2C_ADDR		0x08
-
-#define	KATANA_DEFAULT_BAUD			9600
-#define	KATANA_MPSC_CLK_SRC			8	  /* TCLK */
-
-#define	KATANA_MTD_MONITOR_SIZE			(1 << 20) /* 1 MB */
-
-#define	KATANA_ETH0_PHY_ADDR			12
-#define	KATANA_ETH1_PHY_ADDR			11
-#define	KATANA_ETH2_PHY_ADDR			4
-
-#define KATANA_PRODUCT_ID_3750			0x01
-#define KATANA_PRODUCT_ID_750i			0x02
-#define KATANA_PRODUCT_ID_752i			0x04
-
-#define KATANA_ETH_TX_QUEUE_SIZE		800
-#define KATANA_ETH_RX_QUEUE_SIZE		400
-
-#define	KATANA_ETH_PORT_CONFIG_VALUE			\
-	ETH_UNICAST_NORMAL_MODE			|	\
-	ETH_DEFAULT_RX_QUEUE_0			|	\
-	ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
-	ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
-	ETH_RECEIVE_BC_IF_IP			|	\
-	ETH_RECEIVE_BC_IF_ARP			|	\
-	ETH_CAPTURE_TCP_FRAMES_DIS		|	\
-	ETH_CAPTURE_UDP_FRAMES_DIS		|	\
-	ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define	KATANA_ETH_PORT_CONFIG_EXTEND_VALUE		\
-	ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
-	ETH_PARTITION_DISABLE
-
-#define	GT_ETH_IPG_INT_RX(value)			\
-	((value & 0x3fff) << 8)
-
-#define	KATANA_ETH_PORT_SDMA_CONFIG_VALUE		\
-	ETH_RX_BURST_SIZE_4_64BIT		|	\
-	GT_ETH_IPG_INT_RX(0)			|	\
-	ETH_TX_BURST_SIZE_4_64BIT
-
-#define	KATANA_ETH_PORT_SERIAL_CONTROL_VALUE		\
-	ETH_FORCE_LINK_PASS			|	\
-	ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-	ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-	ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-	ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-	ETH_FORCE_BP_MODE_NO_JAM		|	\
-	BIT9					|	\
-	ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-	ETH_RETRANSMIT_16_ATTEMPTS		|	\
-	ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-	ETH_DTE_ADV_0				|	\
-	ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-	ETH_AUTO_NEG_NO_CHANGE			|	\
-	ETH_MAX_RX_PACKET_9700BYTE		|	\
-	ETH_CLR_EXT_LOOPBACK			|	\
-	ETH_SET_FULL_DUPLEX_MODE		|	\
-	ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-#ifndef __ASSEMBLY__
-
-typedef enum {
-	KATANA_ID_3750,
-	KATANA_ID_750I,
-	KATANA_ID_752I,
-	KATANA_ID_MAX
-} katana_id_t;
-
-#endif
-
-static inline u32
-katana_bus_freq(void __iomem *cpld_base)
-{
-	u8 bd_cfg_0;
-
-	bd_cfg_0 = in_8(cpld_base + KATANA_CPLD_BD_CFG_0);
-
-	switch (bd_cfg_0 & KATANA_CPLD_BD_CFG_0_SYSCLK_MASK) {
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_200:
-		return 200000000;
-		break;
-
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_166:
-		return 166666666;
-		break;
-
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_133:
-		return 133333333;
-		break;
-
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_100:
-		return 100000000;
-		break;
-
-	default:
-		return 133333333;
-		break;
-	}
-}
-
-#endif	/* __PPC_PLATFORMS_KATANA_H */
diff --git a/arch/ppc/platforms/lantec.h b/arch/ppc/platforms/lantec.h
deleted file mode 100644
index 5e5eb6d0f6aa..000000000000
--- a/arch/ppc/platforms/lantec.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * LANTEC board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_LANTEC_H
-#define __MACH_LANTEC_H
-
-
-#include <asm/ppcboot.h>
-
-#define	IMAP_ADDR	0xFFF00000	/* physical base address of IMMR area	*/
-#define IMAP_SIZE	(64 * 1024)	/* mapped size of IMMR area		*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_LANTEC_H */
diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
deleted file mode 100644
index b9e9db63f65b..000000000000
--- a/arch/ppc/platforms/lite5200.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Platform support file for the Freescale LITE5200 based on MPC52xx.
- * A maximum of this file should be moved to syslib/mpc52xx_?????
- * so that new platform based on MPC52xx need a minimal platform file
- * ( avoid code duplication )
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based on the 2.4 code written by Kent Borg,
- * Dale Farnsworth <dale.farnsworth@mvista.com> and
- * Wolfgang Denk <wd@denx.de>
- * 
- * Copyright 2004-2005 Sylvain Munaut <tnt@246tNt.com>
- * Copyright 2003 Motorola Inc.
- * Copyright 2003 MontaVista Software Inc.
- * Copyright 2003 DENX Software Engineering (wd@denx.de)
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-#include <linux/console.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mpc52xx.h>
-#include <asm/ppc_sys.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-
-
-extern int powersave_nap;
-
-/* Board data given by U-Boot */
-bd_t __res;
-EXPORT_SYMBOL(__res);	/* For modules */
-
-
-/* ======================================================================== */
-/* Platform specific code                                                   */
-/* ======================================================================== */
-
-/* Supported PSC function in "preference" order */
-struct mpc52xx_psc_func mpc52xx_psc_functions[] = {
-		{       .id     = 0,
-			.func   = "uart",
-		},
-		{       .id     = -1,   /* End entry */
-			.func   = NULL,
-		}
-	};
-
-
-static int
-lite5200_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: Freescale LITE5200\n");
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_LITE5200B
-static int
-lite5200_map_irq(struct pci_dev *dev, unsigned char idsel,
-		    unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *        A             B             C             D
-	 */
-	{
-		{MPC52xx_IRQ0, MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3},
-		{MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3, MPC52xx_IRQ0},
-	};
-
-	const long min_idsel = 24, max_idsel = 25, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-#else /* Original Lite */
-static int
-lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1;
-}
-#endif
-#endif
-
-static void __init
-lite5200_setup_cpu(void)
-{
-	struct mpc52xx_gpio __iomem *gpio;
-	struct mpc52xx_intr __iomem *intr;
-
-	u32 port_config;
-	u32 intr_ctrl;
-
-	/* Map zones */
-	gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
-	intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
-
-	if (!gpio || !intr) {
-		printk(KERN_ERR __FILE__ ": "
-			"Error while mapping GPIO/INTR during "
-			"lite5200_setup_cpu\n");
-		goto unmap_regs;
-	}
-
-	/* Get port mux config */
-	port_config = in_be32(&gpio->port_config);
-
-	/* 48Mhz internal, pin is GPIO */
-	port_config &= ~0x00800000;
-
-	/* USB port */
-	port_config &= ~0x00007000;	/* Differential mode - USB1 only */
-	port_config |=  0x00001000;
-
-	/* ATA CS is on csb_4/5 */
-	port_config &= ~0x03000000;
-	port_config |=  0x01000000;
-
-	/* Commit port config */
-	out_be32(&gpio->port_config, port_config);
-
-	/* IRQ[0-3] setup */
-	intr_ctrl = in_be32(&intr->ctrl);
-	intr_ctrl &= ~0x00ff0000;
-#ifdef CONFIG_LITE5200B
-	/* IRQ[0-3] Level Active Low */
-	intr_ctrl |=  0x00ff0000;
-#else
-	/* IRQ0 Level Active Low
-	 * IRQ[1-3] Level Active High */
- 	intr_ctrl |=  0x00c00000;
-#endif
-	out_be32(&intr->ctrl, intr_ctrl);
-
-	/* Unmap reg zone */
-unmap_regs:
-	if (gpio) iounmap(gpio);
-	if (intr) iounmap(intr);
-}
-
-static void __init
-lite5200_setup_arch(void)
-{
-	/* CPU & Port mux setup */
-	mpc52xx_setup_cpu();	/* Generic */
-	lite5200_setup_cpu();	/* Platform specific */
-
-#ifdef CONFIG_PCI
-	/* PCI Bridge setup */
-	mpc52xx_find_bridges();
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-              unsigned long r6, unsigned long r7)
-{
-	/* Generic MPC52xx platform initialization */
-	/* TODO Create one and move a max of stuff in it.
-	   Put this init in the syslib */
-
-	struct bi_record *bootinfo = find_bootinfo();
-
-	if (bootinfo)
-		parse_bootinfo(bootinfo);
-	else {
-		/* Load the bd_t board info structure */
-		if (r3)
-			memcpy((void*)&__res,(void*)(r3+KERNELBASE),
-					sizeof(bd_t));
-
-#ifdef CONFIG_BLK_DEV_INITRD
-		/* Load the initrd */
-		if (r4) {
-			initrd_start = r4 + KERNELBASE;
-			initrd_end = r5 + KERNELBASE;
-		}
-#endif
-
-		/* Load the command line */
-		if (r6) {
-			*(char *)(r7+KERNELBASE) = 0;
-			strcpy(cmd_line, (char *)(r6+KERNELBASE));
-		}
-	}
-
-	/* PPC Sys identification */
-	identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
-	/* BAT setup */
-	mpc52xx_set_bat();
-
-	/* No ISA bus by default */
-#ifdef CONFIG_PCI
-	isa_io_base		= 0;
-	isa_mem_base		= 0;
-#endif
-
-	/* Powersave */
-	/* This is provided as an example on how to do it. But you
-	   need to be aware that NAP disable bus snoop and that may
-	   be required for some devices to work properly, like USB ... */
-	/* powersave_nap = 1; */
-
-
-	/* Setup the ppc_md struct */
-	ppc_md.setup_arch	= lite5200_setup_arch;
-	ppc_md.show_cpuinfo	= lite5200_show_cpuinfo;
-	ppc_md.show_percpuinfo	= NULL;
-	ppc_md.init_IRQ		= mpc52xx_init_irq;
-	ppc_md.get_irq		= mpc52xx_get_irq;
-
-#ifdef CONFIG_PCI
-	ppc_md.pci_map_irq	= lite5200_map_irq;
-#endif
-
-	ppc_md.find_end_of_memory = mpc52xx_find_end_of_memory;
-	ppc_md.setup_io_mappings  = mpc52xx_map_io;
-
-	ppc_md.restart		= mpc52xx_restart;
-	ppc_md.power_off	= mpc52xx_power_off;
-	ppc_md.halt		= mpc52xx_halt;
-
-		/* No time keeper on the LITE5200 */
-	ppc_md.time_init	= NULL;
-	ppc_md.get_rtc_time	= NULL;
-	ppc_md.set_rtc_time	= NULL;
-
-	ppc_md.calibrate_decr	= mpc52xx_calibrate_decr;
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress		= mpc52xx_progress;
-#endif
-}
-
diff --git a/arch/ppc/platforms/lite5200.h b/arch/ppc/platforms/lite5200.h
deleted file mode 100644
index 852a18e24d0b..000000000000
--- a/arch/ppc/platforms/lite5200.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Definitions for Freescale LITE5200 : MPC52xx Standard Development
- * Platform board support
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __PLATFORMS_LITE5200_H__
-#define __PLATFORMS_LITE5200_H__
-
-/* Serial port used for low-level debug */
-#define MPC52xx_PF_CONSOLE_PORT 1	/* PSC1 */
-
-
-#endif /* __PLATFORMS_LITE5200_H__ */
diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c
deleted file mode 100644
index 1e3aa6e9b6c7..000000000000
--- a/arch/ppc/platforms/lopec.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Setup routines for the Motorola LoPEC.
- *
- * Author: Dan Cox
- * Maintainer: Tom Rini <trini@kernel.crashing.org>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/pci_ids.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/io.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/hw_irq.h>
-#include <asm/prep_nvram.h>
-#include <asm/kgdb.h>
-
-/*
- * Define all of the IRQ senses and polarities.  Taken from the
- * LoPEC Programmer's Reference Guide.
- */
-static u_char lopec_openpic_initsenses[16] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 6 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 10 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 11 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 12 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 13 */
-	(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),	/* IRQ 14 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE)	/* IRQ 15 */
-};
-
-static inline int __init
-lopec_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int irq;
-	static char pci_irq_table[][4] = {
-		{16, 0, 0, 0}, /* ID 11 - Winbond */
-		{22, 0, 0, 0}, /* ID 12 - SCSI */
-		{0, 0, 0, 0}, /* ID 13 - nothing */
-		{17, 0, 0, 0}, /* ID 14 - 82559 Ethernet */
-		{27, 0, 0, 0}, /* ID 15 - USB */
-		{23, 0, 0, 0}, /* ID 16 - PMC slot 1 */
-		{24, 0, 0, 0}, /* ID 17 - PMC slot 2 */
-		{25, 0, 0, 0}, /* ID 18 - PCI slot */
-		{0, 0, 0, 0}, /* ID 19 - nothing */
-		{0, 0, 0, 0}, /* ID 20 - nothing */
-		{0, 0, 0, 0}, /* ID 21 - nothing */
-		{0, 0, 0, 0}, /* ID 22 - nothing */
-		{0, 0, 0, 0}, /* ID 23 - nothing */
-		{0, 0, 0, 0}, /* ID 24 - PMC slot 1b */
-		{0, 0, 0, 0}, /* ID 25 - nothing */
-		{0, 0, 0, 0}  /* ID 26 - PMC Slot 2b */
-	};
-	const long min_idsel = 11, max_idsel = 26, irqs_per_slot = 4;
-
-	irq = PCI_IRQ_TABLE_LOOKUP;
-	if (!irq)
-		return 0;
-
-	return irq;
-}
-
-static void __init
-lopec_setup_winbond_83553(struct pci_controller *hose)
-{
-	int devfn;
-
-	devfn = PCI_DEVFN(11,0);
-
-	/* IDE interrupt routing (primary 14, secondary 15) */
-	early_write_config_byte(hose, 0, devfn, 0x43, 0xef);
-	/* PCI interrupt routing */
-	early_write_config_word(hose, 0, devfn, 0x44, 0x0000);
-
-	/* ISA-PCI address decoder */
-	early_write_config_byte(hose, 0, devfn, 0x48, 0xf0);
-
-	/* RTC, kb, not used in PPC */
-	early_write_config_byte(hose, 0, devfn, 0x4d, 0x00);
-	early_write_config_byte(hose, 0, devfn, 0x4e, 0x04);
-	devfn = PCI_DEVFN(11, 1);
-	early_write_config_byte(hose, 0, devfn, 0x09, 0x8f);
-	early_write_config_dword(hose, 0, devfn, 0x40, 0x00ff0011);
-}
-
-static void __init
-lopec_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose, MPC10X_MEM_MAP_B, MPC10X_MEM_MAP_B,
-				MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		hose->mem_resources[0].end = 0xffffffff;
-		lopec_setup_winbond_83553(hose);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-		ppc_md.pci_swizzle = common_swizzle;
-		ppc_md.pci_map_irq = lopec_map_irq;
-	}
-}
-
-static int
-lopec_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: Motorola LoPEC\n");
-	return 0;
-}
-
-static void
-lopec_restart(char *cmd)
-{
-#define LOPEC_SYSSTAT1 0xffe00000
-	/* force a hard reset, if possible */
-	unsigned char reg = *((unsigned char *) LOPEC_SYSSTAT1);
-	reg |= 0x80;
-	*((unsigned char *) LOPEC_SYSSTAT1) = reg;
-
-	local_irq_disable();
-	while(1);
-#undef LOPEC_SYSSTAT1
-}
-
-static void
-lopec_halt(void)
-{
-	local_irq_disable();
-	while(1);
-}
-
-static void
-lopec_power_off(void)
-{
-	lopec_halt();
-}
-
-static void __init
-lopec_init_IRQ(void)
-{
-	int i;
-
-	/*
-	 * Provide the open_pic code with the correct table of interrupts.
-	 */
-	OpenPIC_InitSenses = lopec_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(lopec_openpic_initsenses);
-
-	mpc10x_set_openpic();
-
-	/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
-	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-			&i8259_irq);
-
-	/*
-	 * The EPIC allows for a read in the range of 0xFEF00000 ->
-	 * 0xFEFFFFFF to generate a PCI interrupt-acknowledge transaction.
-	 */
-	i8259_init(0xfef00000, 0);
-}
-
-static int __init
-lopec_request_io(void)
-{
-	outb(0x00, 0x4d0);
-	outb(0xc0, 0x4d1);
-
-	request_region(0x00, 0x20, "dma1");
-	request_region(0x20, 0x20, "pic1");
-	request_region(0x40, 0x20, "timer");
-	request_region(0x80, 0x10, "dma page reg");
-	request_region(0xa0, 0x20, "pic2");
-	request_region(0xc0, 0x20, "dma2");
-
-	return 0;
-}
-
-device_initcall(lopec_request_io);
-
-static void __init
-lopec_map_io(void)
-{
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xb0000000, 0xb0000000, 0x10000000, _PAGE_IO);
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-lopec_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf8000ffe);
-	mtspr(SPRN_DBAT1L, 0xf800002a);
-	mb();
-}
-
-TODC_ALLOC();
-
-static void __init
-lopec_setup_arch(void)
-{
-
-	TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
-		  ioremap(0xffe80000, 0x8000), 8);
-
-	loops_per_jiffy = 100000000/HZ;
-
-	lopec_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#elif defined(CONFIG_ROOT_NFS)
-        	ROOT_DEV = Root_NFS;
-#elif defined(CONFIG_BLK_DEV_IDEDISK)
-	        ROOT_DEV = Root_HDA1;
-#else
-        	ROOT_DEV = Root_SDA1;
-#endif
-
-#ifdef CONFIG_PPCBUG_NVRAM
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if ( cmd_line[0] == '\0' ) {
-		char *bootargs;
-		 bootargs = prep_nvram_get_var("bootargs");
-		 if (bootargs != NULL) {
-			 strcpy(cmd_line, bootargs);
-			 /* again.. */
-			 strcpy(boot_command_line, cmd_line);
-		}
-	}
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-	lopec_set_bat();
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = lopec_setup_arch;
-	ppc_md.show_cpuinfo = lopec_show_cpuinfo;
-	ppc_md.init_IRQ = lopec_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = lopec_restart;
-	ppc_md.power_off = lopec_power_off;
-	ppc_md.halt = lopec_halt;
-
-	ppc_md.setup_io_mappings = lopec_map_io;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
diff --git a/arch/ppc/platforms/lopec.h b/arch/ppc/platforms/lopec.h
deleted file mode 100644
index d597b6878693..000000000000
--- a/arch/ppc/platforms/lopec.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/ppc/platforms/lopec.h
- *
- * Definitions for Motorola LoPEC board.
- *
- * Author: Dan Cox
- *         danc@mvista.com (or, alternately, source@mvista.com)
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __H_LOPEC_SERIAL
-#define __H_LOPEC_SERIAL
-
-#define RS_TABLE_SIZE 3
-
-#define BASE_BAUD (1843200 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-#define SERIAL_PORT_DFNS \
-         { 0, BASE_BAUD, 0xffe10000, 29, STD_COM_FLAGS, \
-           iomem_base: (u8 *) 0xffe10000, \
-           io_type: SERIAL_IO_MEM }, \
-         { 0, BASE_BAUD, 0xffe11000, 20, STD_COM_FLAGS, \
-           iomem_base: (u8 *) 0xffe11000, \
-           io_type: SERIAL_IO_MEM }, \
-         { 0, BASE_BAUD, 0xffe12000, 21, STD_COM_FLAGS, \
-           iomem_base: (u8 *) 0xffe12000, \
-           io_type: SERIAL_IO_MEM }
-
-#endif
diff --git a/arch/ppc/platforms/lwmon.h b/arch/ppc/platforms/lwmon.h
deleted file mode 100644
index e63f3b07a5db..000000000000
--- a/arch/ppc/platforms/lwmon.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Liebherr LWMON board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_LWMON_H
-#define __MACH_LWMON_H
-
-
-#include <asm/ppcboot.h>
-
-#define	IMAP_ADDR	0xFFF00000	/* physical base address of IMMR area	*/
-#define IMAP_SIZE	(64 * 1024)	/* mapped size of IMMR area		*/
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define PCMCIA_MEM_SIZE		( 64 << 20 )
-
-#define	MAX_HWIFS	1	/* overwrite default in include/asm-ppc/ide.h	*/
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET		0
-#define IDE0_DATA_REG_OFFSET		(PCMCIA_MEM_SIZE + 0x320)
-#define IDE0_ERROR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 1)
-#define IDE0_NSECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 2)
-#define IDE0_SECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 3)
-#define IDE0_LCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 4)
-#define IDE0_HCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 5)
-#define IDE0_SELECT_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 6)
-#define IDE0_STATUS_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 7)
-#define IDE0_CONTROL_REG_OFFSET		0x0106
-#define IDE0_IRQ_REG_OFFSET		0x000A	/* not used			*/
-
-#define	IDE0_INTERRUPT			13
-
-/*
- * Definitions for I2C devices
- */
-#define I2C_ADDR_AUDIO		0x28	/* Audio volume control			*/
-#define I2C_ADDR_SYSMON		0x2E	/* LM87 System Monitor			*/
-#define I2C_ADDR_RTC		0x51	/* PCF8563 RTC				*/
-#define I2C_ADDR_POWER_A	0x52	/* PCMCIA/USB power switch, channel A	*/
-#define I2C_ADDR_POWER_B	0x53	/* PCMCIA/USB power switch, channel B	*/
-#define I2C_ADDR_KEYBD		0x56	/* PIC LWE keyboard			*/
-#define I2C_ADDR_PICIO		0x57	/* PIC IO Expander			*/
-#define I2C_ADDR_EEPROM		0x58	/* EEPROM AT24C164			*/
-
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_LWMON_H */
diff --git a/arch/ppc/platforms/mbx.h b/arch/ppc/platforms/mbx.h
deleted file mode 100644
index 1cf36fa3592d..000000000000
--- a/arch/ppc/platforms/mbx.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola MBX boards.  This was originally created for the
- * MBX860, and probably needs revisions for other boards (like the 821).
- * When this file gets out of control, we can split it up into more
- * meaningful pieces.
- *
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_MBX_DEFS
-#define __MACH_MBX_DEFS
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * EPPC-Bug starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_tag;		/* Should be 0x42444944 "BDID" */
-	unsigned int	bi_size;	/* Size of this structure */
-	unsigned int	bi_revision;	/* revision of this structure */
-	unsigned int	bi_bdate;	/* EPPCbug date, i.e. 0x11061997 */
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned int	bi_clun;	/* Boot device controller */
-	unsigned int	bi_dlun;	/* Boot device logical dev */
-
-	/* These fields are not part of the board information structure
-	 * provided by the boot rom.  They are filled in by embed_config.c
-	 * so we have the information consistent with other platforms.
-	 */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-/* Memory map for the MBX as configured by EPPC-Bug.  We could reprogram
- * The SIU and PCI bridge, and try to use larger MMU pages, but the
- * performance gain is not measurable and it certainly complicates the
- * generic MMU model.
- *
- * In a effort to minimize memory usage for embedded applications, any
- * PCI driver or ISA driver must request or map the region required by
- * the device.  For convenience (and since we can map up to 4 Mbytes with
- * a single page table page), the MMU initialization will map the
- * NVRAM, Status/Control registers, CPM Dual Port RAM, and the PCI
- * Bridge CSRs 1:1 into the kernel address space.
- */
-#define PCI_ISA_IO_ADDR		((unsigned)0x80000000)
-#define PCI_ISA_IO_SIZE		((uint)(512 * 1024 * 1024))
-#define PCI_IDE_ADDR		((unsigned)0x81000000)
-#define PCI_ISA_MEM_ADDR	((unsigned)0xc0000000)
-#define PCI_ISA_MEM_SIZE	((uint)(512 * 1024 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0xe0000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024 * 1024))
-#define PCMCIA_DMA_ADDR		((uint)0xe4000000)
-#define PCMCIA_DMA_SIZE		((uint)(64 * 1024 * 1024))
-#define PCMCIA_ATTRB_ADDR	((uint)0xe8000000)
-#define PCMCIA_ATTRB_SIZE	((uint)(64 * 1024 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0xec000000)
-#define PCMCIA_IO_SIZE		((uint)(64 * 1024 * 1024))
-#define NVRAM_ADDR		((uint)0xfa000000)
-#define NVRAM_SIZE		((uint)(1 * 1024 * 1024))
-#define MBX_CSR_ADDR		((uint)0xfa100000)
-#define MBX_CSR_SIZE		((uint)(1 * 1024 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCI_CSR_ADDR		((uint)0xfa210000)
-#define PCI_CSR_SIZE		((uint)(64 * 1024))
-
-/* Map additional physical space into well known virtual addresses.  Due
- * to virtual address mapping, these physical addresses are not accessible
- * in a 1:1 virtual to physical mapping.
- */
-#define ISA_IO_VIRT_ADDR	((uint)0xfa220000)
-#define ISA_IO_VIRT_SIZE	((uint)64 * 1024)
-
-/* Interrupt assignments.
- * These are defined (and fixed) by the MBX hardware implementation.
- */
-#define POWER_FAIL_INT	SIU_IRQ0	/* Power fail */
-#define TEMP_HILO_INT	SIU_IRQ1	/* Temperature sensor */
-#define QSPAN_INT	SIU_IRQ2	/* PCI Bridge (DMA CTLR?) */
-#define ISA_BRIDGE_INT	SIU_IRQ3	/* All those PC things */
-#define COMM_L_INT	SIU_IRQ6	/* MBX Comm expansion connector pin */
-#define STOP_ABRT_INT	SIU_IRQ7	/* Stop/Abort header pin */
-
-/* CPM Ethernet through SCCx.
- *
- * Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
- * to the MBX860 board.  Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PC_ENET_TENA	((ushort)0x0001)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-
-/* The MBX uses the 8259.
-*/
-#define NR_8259_INTS	16
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_MBX_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
deleted file mode 100644
index 62370f4a5a0f..000000000000
--- a/arch/ppc/platforms/mpc866ads_setup.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*arch/ppc/platforms/mpc866ads_setup.c
- *
- * Platform setup for the Freescale mpc866ads board
- *
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * Copyright 2005-2006 MontaVista Software Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-
-#include <linux/fs_enet_pd.h>
-#include <linux/fs_uart_pd.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-
-#include <asm/delay.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/ppcboot.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-#include <asm/ppc_sys.h>
-#include <asm/mpc8xx.h>
-
-extern unsigned char __res[];
-
-static void setup_fec1_ioports(struct fs_platform_info*);
-static void setup_scc1_ioports(struct fs_platform_info*);
-static void setup_smc1_ioports(struct fs_uart_platform_info*);
-static void setup_smc2_ioports(struct fs_uart_platform_info*);
-
-static struct fs_mii_fec_platform_info	mpc8xx_mdio_fec_pdata;
-
-static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
-
-static struct fs_platform_info mpc8xx_enet_pdata[] = {
-	[fsid_fec1] = {
-		.rx_ring = 128,
-		.tx_ring = 16,
-		.rx_copybreak = 240,
-
-		.use_napi = 1,
-		.napi_weight = 17,
-
-		.init_ioports = setup_fec1_ioports,
-
-		.bus_id = "0:0f",
-		.has_phy = 1,
-	},
-	[fsid_scc1] = {
-		.rx_ring = 64,
-		.tx_ring = 8,
-		.rx_copybreak = 240,
-		.use_napi = 1,
-		.napi_weight = 17,
-
-
-		.init_ioports = setup_scc1_ioports,
-
-		.bus_id = "fixed@100:1",
-	},
-};
-
-static struct fs_uart_platform_info mpc866_uart_pdata[] = {
-	[fsid_smc1_uart] = {
-		.brg		= 1,
- 		.fs_no 		= fsid_smc1_uart,
- 		.init_ioports	= setup_smc1_ioports,
-		.tx_num_fifo	= 4,
-		.tx_buf_size	= 32,
-		.rx_num_fifo	= 4,
-		.rx_buf_size	= 32,
- 	},
- 	[fsid_smc2_uart] = {
- 		.brg		= 2,
- 		.fs_no 		= fsid_smc2_uart,
- 		.init_ioports	= setup_smc2_ioports,
-		.tx_num_fifo	= 4,
-		.tx_buf_size	= 32,
-		.rx_num_fifo	= 4,
-		.rx_buf_size	= 32,
- 	},
-};
-
-void __init board_init(void)
-{
-	volatile cpm8xx_t *cp = cpmp;
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
-	clrbits32(bcsr_io,(0x80000000 >> 7));
-	cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
-	cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-#else
-	setbits32(bcsr_io,(0x80000000 >> 7));
-
-	cp->cp_pbpar &= ~(0x000000c0);
-	cp->cp_pbdir |= 0x000000c0;
-	cp->cp_smc[0].smc_smcmr = 0;
-	cp->cp_smc[0].smc_smce = 0;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	cp->cp_simode &= ~(0xe0000000 >> 1);
-	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
-	clrbits32(bcsr_io,(0x80000000 >> 13));
-	cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
-	cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-#else
-	clrbits32(bcsr_io,(0x80000000 >> 13));
-	cp->cp_pbpar &= ~(0x00000c00);
-	cp->cp_pbdir |= 0x00000c00;
-	cp->cp_smc[1].smc_smcmr = 0;
-	cp->cp_smc[1].smc_smce = 0;
-#endif
-	iounmap(bcsr_io);
-}
-
-static void setup_fec1_ioports(struct fs_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-
-	setbits16(&immap->im_ioport.iop_pdpar, 0x1fff);
-	setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
-}
-
-static void setup_scc1_ioports(struct fs_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-	/* Enable the PHY.
-	 */
-	clrbits32(bcsr_io,BCSR1_ETHEN);
-
-	/* Configure port A pins for Txd and Rxd.
-	 */
-	/* Disable receive and transmit in case EPPC-Bug started it.
-	 */
-	setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
-	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
-	clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD);
-
-	/* Configure port C pins to enable CLSN and RENA.
-	 */
-	clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
-	clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
-	setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
-	/* Configure port A for TCLK and RCLK.
-	 */
-	setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK);
-	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK);
-	clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
-	clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
-	setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
-
-	/* In the original SCC enet driver the following code is placed at
-	the end of the initialization */
-	setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
-	setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
-
-}
-
-static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-	unsigned *bcsr_io;
-	unsigned int iobits = 0x000000c0;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-	clrbits32(bcsr_io,BCSR1_RS232EN_1);
-	iounmap(bcsr_io);
-
-	setbits32(&immap->im_cpm.cp_pbpar, iobits);
-	clrbits32(&immap->im_cpm.cp_pbdir, iobits);
-	clrbits16(&immap->im_cpm.cp_pbodr, iobits);
-
-}
-
-static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-	unsigned *bcsr_io;
-	unsigned int iobits = 0x00000c00;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-	clrbits32(bcsr_io,BCSR1_RS232EN_2);
-
-	iounmap(bcsr_io);
-
-#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
-	setbits32(&immap->im_cpm.cp_pbpar, iobits);
-	clrbits32(&immap->im_cpm.cp_pbdir, iobits);
-	clrbits16(&immap->im_cpm.cp_pbodr, iobits);
-#else
-	setbits16(&immap->im_ioport.iop_papar, iobits);
-	clrbits16(&immap->im_ioport.iop_padir, iobits);
-	clrbits16(&immap->im_ioport.iop_paodr, iobits);
-#endif
-
-}
-
-static int ma_count = 0;
-
-static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
-{
-	struct fs_platform_info *fpi;
-
-	volatile cpm8xx_t *cp;
-	bd_t *bd = (bd_t *) __res;
-	char *e;
-	int i;
-
-	/* Get pointer to Communication Processor */
-	cp = cpmp;
-
-	if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
-		printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
-		return;
-	}
-
-
-	fpi = &mpc8xx_enet_pdata[fs_no];
-	fpi->fs_no = fs_no;
-	pdev->dev.platform_data = fpi;
-
-	e = (unsigned char *)&bd->bi_enetaddr;
-	for (i = 0; i < 6; i++)
-		fpi->macaddr[i] = *e++;
-
-	fpi->macaddr[5] += ma_count++;
-}
-
-static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
-					   int idx)
-{
-	/* This is for FEC devices only */
-	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
-		return;
-	mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
-}
-
-static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
-					   int idx)
-{
-	/* This is for SCC devices only */
-	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
-		return;
-
-	mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
-}
-
-static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev,
-                                              int idx)
-{
-	bd_t *bd = (bd_t *) __res;
-	struct fs_uart_platform_info *pinfo;
-	int num = ARRAY_SIZE(mpc866_uart_pdata);
-
-	int id = fs_uart_id_smc2fsid(idx);
-
-	/* no need to alter anything if console */
-	if ((id < num) && (!pdev->dev.platform_data)) {
-		pinfo = &mpc866_uart_pdata[id];
-		pinfo->uart_clk = bd->bi_intfreq;
-		pdev->dev.platform_data = pinfo;
-	}
-}
-
-static int mpc866ads_platform_notify(struct device *dev)
-{
-	static const struct platform_notify_dev_map dev_map[] = {
-		{
-			.bus_id = "fsl-cpm-fec",
-			.rtn = mpc866ads_fixup_fec_enet_pdata,
-		},
-		{
-			.bus_id = "fsl-cpm-scc",
-			.rtn = mpc866ads_fixup_scc_enet_pdata,
-		},
-		{
-			.bus_id = "fsl-cpm-smc:uart",
-			.rtn = mpc866ads_fixup_uart_pdata
-		},
-		{
-			.bus_id = NULL
-		}
-	};
-
-	platform_notify_map(dev_map,dev);
-
-	return 0;
-}
-
-int __init mpc866ads_init(void)
-{
-	bd_t *bd = (bd_t *) __res;
-	struct fs_mii_fec_platform_info* fmpi;
-
-	printk(KERN_NOTICE "mpc866ads: Init\n");
-
-	platform_notify = mpc866ads_platform_notify;
-
-	ppc_sys_device_initfunc();
-	ppc_sys_device_disable_all();
-
-#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC1
-	ppc_sys_device_enable(MPC8xx_CPM_SCC1);
-#endif
-	ppc_sys_device_enable(MPC8xx_CPM_FEC1);
-
-	ppc_sys_device_enable(MPC8xx_MDIO_FEC);
-
-	fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
-		&mpc8xx_mdio_fec_pdata;
-
-	fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-	/* No PHY interrupt line here */
-	fmpi->irq[0xf] = PHY_POLL;
-
-/* Since either of the uarts could be used as console, they need to ready */
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	ppc_sys_device_enable(MPC8xx_CPM_SMC1);
-	ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	ppc_sys_device_enable(MPC8xx_CPM_SMC2);
-	ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
-#endif
-	ppc_sys_device_enable(MPC8xx_MDIO_FEC);
-
-	fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
-		&mpc8xx_mdio_fec_pdata;
-
-	fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-	/* No PHY interrupt line here */
-	fmpi->irq[0xf] = PHY_POLL;
-
-	return 0;
-}
-
-/*
-   To prevent confusion, console selection is gross:
-   by 0 assumed SMC1 and by 1 assumed SMC2
- */
-struct platform_device* early_uart_get_pdev(int index)
-{
-	bd_t *bd = (bd_t *) __res;
-	struct fs_uart_platform_info *pinfo;
-
-	struct platform_device* pdev = NULL;
-	if(index) { /*assume SMC2 here*/
-		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
-		pinfo = &mpc866_uart_pdata[1];
-	} else { /*over SMC1*/
-		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
-		pinfo = &mpc866_uart_pdata[0];
-	}
-
-	pinfo->uart_clk = bd->bi_intfreq;
-	pdev->dev.platform_data = pinfo;
-	ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
-	return NULL;
-}
-
-arch_initcall(mpc866ads_init);
diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c
deleted file mode 100644
index 053b54ac88f2..000000000000
--- a/arch/ppc/platforms/mvme5100.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Board setup routines for the Motorola MVME5100.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/pci-bridge.h>
-#include <asm/bootinfo.h>
-#include <asm/hawk.h>
-
-#include <platforms/pplus.h>
-#include <platforms/mvme5100.h>
-
-static u_char mvme5100_openpic_initsenses[16] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* i8259 cascade */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* TL16C550 UART 1,2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet1 front panel or P2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Hawk Watchdog 1,2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DS1621 thermal alarm */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT0# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT1# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT2# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT3# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTA#, PMC2 INTB# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTB#, PMC2 INTC# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTC#, PMC2 INTD# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTD#, PMC2 INTA# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet 2 (front panel) */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Abort Switch */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* RTC Alarm */
-};
-
-static inline int
-mvme5100_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int irq;
-
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{  0,  0,  0,  0 },	/* IDSEL 11 - Winbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 21, 22, 23, 24 },	/* IDSEL 13 - Universe II */
-		{ 18,  0,  0,  0 },	/* IDSEL 14 - Enet 1 */
-		{  0,  0,  0,  0 },	/* IDSEL 15 - unused */
-		{ 25, 26, 27, 28 },	/* IDSEL 16 - PMC Slot 1 */
-		{ 28, 25, 26, 27 },	/* IDSEL 17 - PMC Slot 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 18 - unused */
-		{ 29,  0,  0,  0 },	/* IDSEL 19 - Enet 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 20 - PMCSPAN */
-	};
-
-	const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
-	irq = PCI_IRQ_TABLE_LOOKUP;
-	/* If lookup is zero, always return 0 */
-	if (!irq)
-		return 0;
-	else
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	/* If IPMC761 present, return table value */
-	return irq;
-#else
-	/* If IPMC761 not present, we don't have an i8259 so adjust */
-	return (irq - NUM_8259_INTERRUPTS);
-#endif
-}
-
-static void
-mvme5100_pcibios_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-
-	if ((dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
-			(dev->device == PCI_DEVICE_ID_MOTOROLA_HAWK))
-		for (i=0; i<DEVICE_COUNT_RESOURCE; i++)
-		{
-			dev->resource[i].start = 0;
-			dev->resource[i].end = 0;
-		}
-}
-
-static void __init
-mvme5100_setup_bridge(void)
-{
-	struct pci_controller*	hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = MVME5100_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource, MVME5100_PCI_LOWER_IO,
-			MVME5100_PCI_UPPER_IO, IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0], MVME5100_PCI_LOWER_MEM,
-			MVME5100_PCI_UPPER_MEM, IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = MVME5100_PCI_LOWER_IO;
-	hose->io_space.end = MVME5100_PCI_UPPER_IO;
-	hose->mem_space.start = MVME5100_PCI_LOWER_MEM;
-	hose->mem_space.end = MVME5100_PCI_UPPER_MEM;
-	hose->io_base_virt = (void *)MVME5100_ISA_IO_BASE;
-
-	/* Use indirect method of Hawk */
-	setup_indirect_pci(hose, MVME5100_PCI_CONFIG_ADDR,
-			MVME5100_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup_resources = mvme5100_pcibios_fixup_resources;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mvme5100_map_irq;
-}
-
-static void __init
-mvme5100_setup_arch(void)
-{
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: enter", 0);
-
-	loops_per_jiffy = 50000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: find_bridges", 0);
-
-	/* Setup PCI host bridge */
-	mvme5100_setup_bridge();
-
-	/* Find and map our OpenPIC */
-	hawk_mpic_init(MVME5100_PCI_MEM_OFFSET);
-	OpenPIC_InitSenses = mvme5100_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(mvme5100_openpic_initsenses);
-
-	printk("MVME5100 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: exit", 0);
-
-	return;
-}
-
-static void __init
-mvme5100_init2(void)
-{
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-		request_region(0x00,0x20,"dma1");
-		request_region(0x20,0x20,"pic1");
-		request_region(0x40,0x20,"timer");
-		request_region(0x80,0x10,"dma page reg");
-		request_region(0xa0,0x20,"pic2");
-		request_region(0xc0,0x20,"dma2");
-#endif
-	return;
-}
-
-/*
- * Interrupt setup and service.
- * Have MPIC on HAWK and cascaded 8259s on Winbond cascaded to MPIC.
- */
-static void __init
-mvme5100_init_IRQ(void)
-{
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	int i;
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: enter", 0);
-
-	openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	openpic_init(NUM_8259_INTERRUPTS);
-	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-			&i8259_irq);
-
-	i8259_init(0, 0);
-#else
-	openpic_init(0);
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: exit", 0);
-
-	return;
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void
-mvme5100_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-static unsigned long __init
-mvme5100_find_end_of_memory(void)
-{
-	return hawk_get_mem_size(MVME5100_HAWK_SMC_BASE);
-}
-
-static void __init
-mvme5100_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-	ioremap_base = 0xfe000000;
-}
-
-static void
-mvme5100_reset_board(void)
-{
-	local_irq_disable();
-
-	/* Set exception prefix high - to the firmware */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	out_8((u_char *)MVME5100_BOARD_MODRST_REG, 0x01);
-
-	return;
-}
-
-static void
-mvme5100_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	mvme5100_reset_board();
-
-	while (i-- > 0);
-	panic("restart failed\n");
-}
-
-static void
-mvme5100_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-mvme5100_power_off(void)
-{
-	mvme5100_halt();
-}
-
-static int
-mvme5100_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola\n");
-	seq_printf(m, "machine\t\t: MVME5100\n");
-
-	return 0;
-}
-
-TODC_ALLOC();
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-	mvme5100_set_bat();
-
-	isa_io_base = MVME5100_ISA_IO_BASE;
-	isa_mem_base = MVME5100_ISA_MEM_BASE;
-	pci_dram_offset = MVME5100_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = mvme5100_setup_arch;
-	ppc_md.show_cpuinfo = mvme5100_show_cpuinfo;
-	ppc_md.init_IRQ = mvme5100_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-	ppc_md.init = mvme5100_init2;
-
-	ppc_md.restart = mvme5100_restart;
-	ppc_md.power_off = mvme5100_power_off;
-	ppc_md.halt = mvme5100_halt;
-
-	ppc_md.find_end_of_memory = mvme5100_find_end_of_memory;
-	ppc_md.setup_io_mappings = mvme5100_map_io;
-
-	TODC_INIT(TODC_TYPE_MK48T37, MVME5100_NVRAM_AS0, MVME5100_NVRAM_AS1,
-			MVME5100_NVRAM_DATA, 8);
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_m48txx_read_val;
-	ppc_md.nvram_write_val = todc_m48txx_write_val;
-}
diff --git a/arch/ppc/platforms/mvme5100.h b/arch/ppc/platforms/mvme5100.h
deleted file mode 100644
index fbb5495165c7..000000000000
--- a/arch/ppc/platforms/mvme5100.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/ppc/platforms/mvme5100.h
- *
- * Definitions for Motorola MVME5100.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_MVME5100_H__
-#define __ASM_MVME5100_H__
-
-#define MVME5100_HAWK_SMC_BASE		0xfef80000
-
-#define	MVME5100_PCI_CONFIG_ADDR	0xfe000cf8
-#define	MVME5100_PCI_CONFIG_DATA	0xfe000cfc
-
-#define MVME5100_PCI_IO_BASE		0xfe000000
-#define MVME5100_PCI_MEM_BASE		0x80000000
-
-#define MVME5100_PCI_MEM_OFFSET		0x00000000
-
-#define MVME5100_PCI_DRAM_OFFSET	0x00000000
-#define MVME5100_ISA_MEM_BASE		0x00000000
-#define MVME5100_ISA_IO_BASE		MVME5100_PCI_IO_BASE
-
-#define MVME5100_PCI_LOWER_MEM		0x80000000
-#define MVME5100_PCI_UPPER_MEM		0xf3f7ffff
-#define MVME5100_PCI_LOWER_IO		0x00000000
-#define MVME5100_PCI_UPPER_IO		0x0077ffff
-
-/* MVME5100 board register addresses. */
-#define	MVME5100_BOARD_STATUS_REG	0xfef88080
-#define	MVME5100_BOARD_MODFAIL_REG	0xfef88090
-#define	MVME5100_BOARD_MODRST_REG	0xfef880a0
-#define	MVME5100_BOARD_TBEN_REG		0xfef880c0
-#define MVME5100_BOARD_SW_READ_REG	0xfef880e0
-#define	MVME5100_BOARD_GEO_ADDR_REG	0xfef880e8
-#define	MVME5100_BOARD_EXT_FEATURE1_REG	0xfef880f0
-#define	MVME5100_BOARD_EXT_FEATURE2_REG	0xfef88100
-
-/* Define the NVRAM/RTC address strobe & data registers */
-#define MVME5100_PHYS_NVRAM_AS0		0xfef880c8
-#define MVME5100_PHYS_NVRAM_AS1		0xfef880d0
-#define MVME5100_PHYS_NVRAM_DATA	0xfef880d8
-
-#define MVME5100_NVRAM_AS0	(MVME5100_PHYS_NVRAM_AS0 - MVME5100_ISA_IO_BASE)
-#define MVME5100_NVRAM_AS1	(MVME5100_PHYS_NVRAM_AS1 - MVME5100_ISA_IO_BASE)
-#define MVME5100_NVRAM_DATA	(MVME5100_PHYS_NVRAM_DATA - MVME5100_ISA_IO_BASE)
-
-/* UART clock, addresses, and irq */
-#define MVME5100_BASE_BAUD		1843200
-#define	MVME5100_SERIAL_1		0xfef88000
-#define	MVME5100_SERIAL_2		0xfef88200
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-#define MVME5100_SERIAL_IRQ		17
-#else
-#define MVME5100_SERIAL_IRQ		1
-#endif
-
-#define RS_TABLE_SIZE  4
-
-#define BASE_BAUD ( MVME5100_BASE_BAUD / 16 )
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-/* All UART IRQs are wire-OR'd to one MPIC IRQ */
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, MVME5100_SERIAL_1, \
-		MVME5100_SERIAL_IRQ, \
-		STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (unsigned char *)MVME5100_SERIAL_1,		\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },				\
-        { 0, BASE_BAUD, MVME5100_SERIAL_2, \
-		MVME5100_SERIAL_IRQ, \
-		STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (unsigned char *)MVME5100_SERIAL_2,		\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif /* __ASM_MVME5100_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/pal4.h b/arch/ppc/platforms/pal4.h
deleted file mode 100644
index 8569c423d887..000000000000
--- a/arch/ppc/platforms/pal4.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Definitions for SBS Palomar IV board
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PLATFORMS_PAL4_H
-#define __PPC_PLATFORMS_PAL4_H
-
-#define PAL4_NVRAM             0xfffc0000
-#define PAL4_NVRAM_SIZE        0x8000
-
-#define PAL4_DRAM              0xfff80000
-#define  PAL4_DRAM_BR_MASK     0xc0
-#define  PAL4_DRAM_BR_SHIFT    6
-#define  PAL4_DRAM_RESET       0x10
-#define  PAL4_DRAM_EREADY      0x40
-
-#define PAL4_MISC              0xfff80004
-#define  PAL4_MISC_FB_MASK     0xc0
-#define  PAL4_MISC_FLASH       0x20  /* StratFlash mapping: 1->0xff80, 0->0xfff0 */
-#define  PAL4_MISC_MISC        0x08
-#define  PAL4_MISC_BITF        0x02
-#define  PAL4_MISC_NVKS        0x01
-
-#define PAL4_L2                0xfff80008
-#define  PAL4_L2_MASK          0x07
-
-#define PAL4_PLDR              0xfff8000c
-
-/* Only two Ethernet devices on the board... */
-#define PAL4_ETH               31
-#define PAL4_INTA              20
-
-#endif /* __PPC_PLATFORMS_PAL4_H */
diff --git a/arch/ppc/platforms/pal4_pci.c b/arch/ppc/platforms/pal4_pci.c
deleted file mode 100644
index d81ae1c7e1cf..000000000000
--- a/arch/ppc/platforms/pal4_pci.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * PCI support for SBS Palomar IV
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/byteorder.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/uaccess.h>
-
-#include <syslib/cpc700.h>
-
-#include "pal4.h"
-
-/* not much to this.... */
-static inline int __init
-pal4_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	if (idsel == 9)
-		return PAL4_ETH;
-	else
-		return PAL4_INTA + (idsel - 3);
-}
-
-void __init
-pal4_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = 0;
-
-	/* Could snatch these from the CPC700.... */
-	pci_init_resource(&hose->io_resource,
-			  0x0,
-			  0x03ffffff,
-			  IORESOURCE_IO,
-			  "PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			  0x90000000,
-			  0x9fffffff,
-			  IORESOURCE_MEM,
-			  "PCI host bridge");
-
-	hose->io_space.start = 0x00800000;
-	hose->io_space.end = 0x03ffffff;
-	hose->mem_space.start = 0x90000000;
-	hose->mem_space.end = 0x9fffffff;
-	hose->io_base_virt = (void *) 0xf8000000;
-
-	setup_indirect_pci(hose, CPC700_PCI_CONFIG_ADDR,
-			   CPC700_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = pal4_map_irq;
-}
diff --git a/arch/ppc/platforms/pal4_serial.h b/arch/ppc/platforms/pal4_serial.h
deleted file mode 100644
index a75343224cfd..000000000000
--- a/arch/ppc/platforms/pal4_serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Definitions for SBS PalomarIV serial support
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PAL4_SERIAL_H
-#define __PPC_PAL4_SERIAL_H
-
-#define CPC700_SERIAL_1       0xff600300
-#define CPC700_SERIAL_2       0xff600400
-
-#define RS_TABLE_SIZE     2
-#define BASE_BAUD         (33333333 / 4 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define SERIAL_PORT_DFNS \
-      {0, BASE_BAUD, CPC700_SERIAL_1, 3, STD_COM_FLAGS, \
-       iomem_base: (unsigned char *) CPC700_SERIAL_1, \
-       io_type: SERIAL_IO_MEM},   /* ttyS0 */ \
-      {0, BASE_BAUD, CPC700_SERIAL_2, 4, STD_COM_FLAGS, \
-       iomem_base: (unsigned char *) CPC700_SERIAL_2, \
-       io_type: SERIAL_IO_MEM}
-
-#endif
diff --git a/arch/ppc/platforms/pal4_setup.c b/arch/ppc/platforms/pal4_setup.c
deleted file mode 100644
index 3da47d9ec7a2..000000000000
--- a/arch/ppc/platforms/pal4_setup.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Board setup routines for the SBS PalomarIV.
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-#include <linux/irq.h>
-#include <linux/kdev_t.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-
-#include <syslib/cpc700.h>
-
-#include "pal4.h"
-
-extern void pal4_find_bridges(void);
-
-unsigned int cpc700_irq_assigns[][2] = {
-        {1, 1},    /* IRQ 0: ECC correctable error */
-        {1, 1},    /* IRQ 1: PCI write to memory range */
-        {0, 1},    /* IRQ 2: PCI write to command register */
-        {0, 1},    /* IRQ 3: UART 0 */
-        {0, 1},    /* IRQ 4: UART 1 */
-        {0, 1},    /* IRQ 5: ICC 0 */
-        {0, 1},    /* IRQ 6: ICC 1 */
-        {0, 1},    /* IRQ 7: GPT compare 0 */
-        {0, 1},    /* IRQ 8: GPT compare 1 */
-        {0, 1},    /* IRQ 9: GPT compare 2 */
-        {0, 1},    /* IRQ 10: GPT compare 3 */
-        {0, 1},    /* IRQ 11: GPT compare 4 */
-        {0, 1},    /* IRQ 12: GPT capture 0 */
-        {0, 1},    /* IRQ 13: GPT capture 1 */
-        {0, 1},    /* IRQ 14: GPT capture 2 */
-        {0, 1},    /* IRQ 15: GPT capture 3 */
-        {0, 1},    /* IRQ 16: GPT capture 4 */
-        {0, 0},    /* IRQ 17: reserved */
-        {0, 0},    /* IRQ 18: reserved */
-        {0, 0},    /* IRQ 19: reserved */
-        {0, 0},    /* IRQ 20: reserved */
-        {0, 1},    /* IRQ 21: Ethernet */
-        {0, 0},    /* IRQ 22: reserved */
-        {0, 0},    /* IRQ 23: reserved */
-        {0, 0},    /* IRQ 24: resreved */
-        {0, 0},    /* IRQ 25: reserved */
-        {0, 0},    /* IRQ 26: reserved */
-        {0, 0},    /* IRQ 27: reserved */
-        {0, 0},    /* IRQ 28: reserved */
-        {0, 0},    /* IRQ 29: reserved */
-        {0, 0},    /* IRQ 30: reserved */
-        {0, 0},    /* IRQ 31: reserved */
-};
-
-static int
-pal4_show_cpuinfo(struct seq_file *m)
-{
-        seq_printf(m, "board\t\t: SBS Palomar IV\n");
-
-        return 0;
-}
-
-static void
-pal4_restart(char *cmd)
-{
-        local_irq_disable();
-        __asm__ __volatile__("lis  3,0xfff0\n \
-                              ori  3,3,0x100\n \
-                              mtspr 26,3\n \
-                              li   3,0\n \
-                              mtspr 27,3\n \
-                              rfi");
-
-        for(;;);
-}
-
-static void
-pal4_power_off(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-static void
-pal4_halt(void)
-{
-	pal4_power_off();
-}
-
-TODC_ALLOC();
-
-static void __init
-pal4_setup_arch(void)
-{
-	unsigned long l2;
-
-	TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
-		  ioremap(PAL4_NVRAM, PAL4_NVRAM_SIZE), 8);
-
-	pal4_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-		ROOT_DEV = Root_NFS;
-
-	/* The L2 gets disabled in the bootloader, but all the proper
-	   bits should be present from the fw, so just re-enable it */
-	l2 = _get_L2CR();
-	if (!(l2 & L2CR_L2E)) {
-		/* presume that it was initially set if the size is
-		   still present. */
-		if (l2 ^ L2CR_L2SIZ_MASK)
-			_set_L2CR(l2 | L2CR_L2E);
-		else
-			printk("L2 not set by firmware; left disabled.\n");
-	}
-}
-
-static void __init
-pal4_map_io(void)
-{
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	isa_io_base = 0 /*PAL4_ISA_IO_BASE*/;
-	pci_dram_offset = 0 /*PAL4_PCI_SYS_MEM_BASE*/;
-
-	ppc_md.setup_arch = pal4_setup_arch;
-	ppc_md.show_cpuinfo = pal4_show_cpuinfo;
-
-	ppc_md.setup_io_mappings = pal4_map_io;
-
-	ppc_md.init_IRQ = cpc700_init_IRQ;
-	ppc_md.get_irq = cpc700_get_irq;
-
-	ppc_md.restart = pal4_restart;
-	ppc_md.halt = pal4_halt;
-	ppc_md.power_off = pal4_power_off;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-}
-
diff --git a/arch/ppc/platforms/pcu_e.h b/arch/ppc/platforms/pcu_e.h
deleted file mode 100644
index a2c03a22875e..000000000000
--- a/arch/ppc/platforms/pcu_e.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Siemens PCU E board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_PCU_E_H
-#define __MACH_PCU_E_H
-
-
-#include <asm/ppcboot.h>
-
-#define	PCU_E_IMMR_BASE    0xFE000000	/* phys. addr of IMMR			*/
-#define	PCU_E_IMAP_SIZE   (64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR     PCU_E_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE     PCU_E_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-#define	FEC_INTERRUPT	15		/* = SIU_LEVEL7				*/
-#define	DEC_INTERRUPT	13		/* = SIU_LEVEL6				*/
-#define	CPM_INTERRUPT	11		/* = SIU_LEVEL5 (was: SIU_LEVEL2)	*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_PCU_E_H */
diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c
deleted file mode 100644
index 162dc85ff7be..000000000000
--- a/arch/ppc/platforms/powerpmc250.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * Board setup routines for Force PowerPMC-250 Processor PMC
- *
- * Author: Troy Benjegerdes <tbenjegerdes@mvista.com>
- * Borrowed heavily from prpmc750_*.c by
- * 	Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <platforms/powerpmc250.h>
-#include <asm/open_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc10x.h>
-#include <asm/uaccess.h>
-#include <asm/bootinfo.h>
-
-extern void powerpmc250_find_bridges(void);
-extern unsigned long loops_per_jiffy;
-
-static u_char powerpmc250_openpic_initsenses[] __initdata =
-{
-    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-    1,	/* PMC INTA (also MPC107 output interrupt INTA) */
-    1,	/* PMC INTB (also I82559 Ethernet controller) */
-    1,	/* PMC INTC */
-    1,	/* PMC INTD */
-    0,	/* DUART interrupt (active high) */
-};
-
-static int
-powerpmc250_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m,"machine\t\t: Force PowerPMC250\n");
-
-	return 0;
-}
-
-static void __init
-powerpmc250_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000/HZ;
-
-	/* Lookup PCI host bridges */
-	powerpmc250_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk("Force PowerPMC250 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-#if 0
-/*
- * Compute the PrPMC750's bus speed using the baud clock as a
- * reference.
- */
-unsigned long __init powerpmc250_get_bus_speed(void)
-{
-	unsigned long tbl_start, tbl_end;
-	unsigned long current_state, old_state, bus_speed;
-	unsigned char lcr, dll, dlm;
-	int baud_divisor, count;
-
-	/* Read the UART's baud clock divisor */
-	lcr = readb(PRPMC750_SERIAL_0_LCR);
-	writeb(lcr | UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	dll = readb(PRPMC750_SERIAL_0_DLL);
-	dlm = readb(PRPMC750_SERIAL_0_DLM);
-	writeb(lcr & ~UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	baud_divisor = (dlm << 8) | dll;
-
-	/*
-	 * Use the baud clock divisor and base baud clock
-	 * to determine the baud rate and use that as
-	 * the number of baud clock edges we use for
-	 * the time base sample.  Make it half the baud
-	 * rate.
-	 */
-	count = PRPMC750_BASE_BAUD / (baud_divisor * 16);
-
-	/* Find the first edge of the baud clock */
-	old_state = readb(PRPMC750_STATUS_REG) & PRPMC750_BAUDOUT_MASK;
-	do {
-		current_state = readb(PRPMC750_STATUS_REG) &
-			PRPMC750_BAUDOUT_MASK;
-	} while(old_state == current_state);
-
-	old_state = current_state;
-
-	/* Get the starting time base value */
-	tbl_start = get_tbl();
-
-	/*
-	 * Loop until we have found a number of edges equal
-	 * to half the count (half the baud rate)
-	 */
-	do {
-		do {
-			current_state = readb(PRPMC750_STATUS_REG) &
-				PRPMC750_BAUDOUT_MASK;
-		} while(old_state == current_state);
-		old_state = current_state;
-	} while (--count);
-
-	/* Get the ending time base value */
-	tbl_end = get_tbl();
-
-	/* Compute bus speed */
-	bus_speed = (tbl_end-tbl_start)*128;
-
-	return bus_speed;
-}
-#endif
-
-static void __init
-powerpmc250_calibrate_decr(void)
-{
-	unsigned long freq;
-	int divisor = 4;
-
-	//freq = powerpmc250_get_bus_speed();
-#warning hardcoded bus freq
-	freq = 100000000;
-
-	tb_ticks_per_jiffy = freq / (HZ * divisor);
-	tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-}
-
-static void
-powerpmc250_restart(char *cmd)
-{
-	local_irq_disable();
-	/* Hard reset */
-	writeb(0x11, 0xfe000332);
-	while(1);
-}
-
-static void
-powerpmc250_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-powerpmc250_power_off(void)
-{
-	powerpmc250_halt();
-}
-
-static void __init
-powerpmc250_init_IRQ(void)
-{
-
-	OpenPIC_InitSenses = powerpmc250_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(powerpmc250_openpic_initsenses);
-	mpc10x_set_openpic();
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void
-powerpmc250_set_bat(void)
-{
-	unsigned long   bat3u, bat3l;
-	static int	mapping_set = 0;
-
-	if (!mapping_set)
-	{
-		__asm__ __volatile__(
-				" lis %0,0xf000\n \
-				ori %1,%0,0x002a\n \
-				ori %0,%0,0x1ffe\n \
-				mtspr 0x21e,%0\n \
-				mtspr 0x21f,%1\n \
-				isync\n \
-				sync "
-				: "=r" (bat3u), "=r" (bat3l));
-
-		mapping_set = 1;
-	}
-	return;
-}
-
-static unsigned long __init
-powerpmc250_find_end_of_memory(void)
-{
-	/* Cover I/O space with a BAT */
-	/* yuck, better hope your ram size is a power of 2  -- paulus */
-	powerpmc250_set_bat();
-
-	return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
-}
-
-static void __init
-powerpmc250_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if ( r4 )
-	{
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif
-
-	/* Copy cmd_line parameters */
-	if ( r6)
-	{
-		*(char *)(r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6 + KERNELBASE));
-	}
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-
-	ppc_md.setup_arch	= powerpmc250_setup_arch;
-	ppc_md.show_cpuinfo	= powerpmc250_show_cpuinfo;
-	ppc_md.init_IRQ		= powerpmc250_init_IRQ;
-	ppc_md.get_irq		= openpic_get_irq;
-
-	ppc_md.find_end_of_memory = powerpmc250_find_end_of_memory;
-	ppc_md.setup_io_mappings = powerpmc250_map_io;
-
-	ppc_md.restart		= powerpmc250_restart;
-	ppc_md.power_off	= powerpmc250_power_off;
-	ppc_md.halt		= powerpmc250_halt;
-
-	/* PowerPMC250 has no timekeeper part */
-	ppc_md.time_init	= NULL;
-	ppc_md.get_rtc_time	= NULL;
-	ppc_md.set_rtc_time	= NULL;
-	ppc_md.calibrate_decr	= powerpmc250_calibrate_decr;
-}
-
-
-/*
- * (This used to be arch/ppc/platforms/powerpmc250_pci.c)
- *
- * PCI support for Force PowerPMC250
- *
- */
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-static inline int __init
-powerpmc250_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{17,	0,	0,	0},	/* Device 11 - 82559 */
-		{0,	0,	0,	0},	/* 12 */
-		{0,	0,	0,	0},	/* 13 */
-		{0,	0,	0,	0},	/* 14 */
-		{0,	0,	0,	0},	/* 15 */
-		{16,	17,	18,	19},	/* Device 16 - PMC A1?? */
-		};
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static int
-powerpmc250_exclude_device(u_char bus, u_char devfn)
-{
-	/*
-	 * While doing PCI Scan  the MPC107 will 'detect' itself as
-	 * device on the PCI Bus, will create an incorrect response and
-	 * later will respond incorrectly to Configuration read coming
-	 * from another device.
-	 *
-	 * The work around is that when doing a PCI Scan one
-	 * should skip its own device number in the scan.
-	 *
-	 * The top IDsel is AD13 and the middle is AD14.
-	 *
-	 * -- Note from force
-	 */
-
-	if ((bus == 0) && (PCI_SLOT(devfn) == 13 || PCI_SLOT(devfn) == 14)) {
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	else {
-		return PCIBIOS_SUCCESSFUL;
-	}
-}
-
-void __init
-powerpmc250_find_bridges(void)
-{
-	struct pci_controller* hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose){
-		printk("Can't allocate PCI 'hose' structure!!!\n");
-		return;
-	}
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose,
-			MPC10X_MEM_MAP_B,
-			MPC10X_MEM_MAP_B,
-			MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		hose->mem_resources[0].end = 0xffffffff;
-
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-		/* ppc_md.pcibios_fixup = pcore_pcibios_fixup; */
-		ppc_md.pci_swizzle = common_swizzle;
-
-		ppc_md.pci_exclude_device = powerpmc250_exclude_device;
-		ppc_md.pci_map_irq = powerpmc250_map_irq;
-	} else {
-		if (ppc_md.progress)
-			ppc_md.progress("Bridge init failed", 0x100);
-		printk("Host bridge init failed\n");
-	}
-
-}
diff --git a/arch/ppc/platforms/powerpmc250.h b/arch/ppc/platforms/powerpmc250.h
deleted file mode 100644
index d33ad8dc0439..000000000000
--- a/arch/ppc/platforms/powerpmc250.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/ppc/platforms/powerpmc250.h
- *
- * Definitions for Force PowerPMC-250 board support
- *
- * Author: Troy Benjegerdes <tbenjegerdes@mvista.com>
- *
- * Borrowed heavily from prpmc750.h by Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASMPPC_POWERPMC250_H
-#define __ASMPPC_POWERPMC250_H
-
-#define POWERPMC250_PCI_CONFIG_ADDR	0x80000cf8
-#define POWERPMC250_PCI_CONFIG_DATA	0x80000cfc
-
-#define POWERPMC250_PCI_PHY_MEM_BASE	0xc0000000
-#define POWERPMC250_PCI_MEM_BASE		0xf0000000
-#define POWERPMC250_PCI_IO_BASE		0x80000000
-
-#define POWERPMC250_ISA_IO_BASE		POWERPMC250_PCI_IO_BASE
-#define POWERPMC250_ISA_MEM_BASE		POWERPMC250_PCI_MEM_BASE
-#define POWERPMC250_PCI_MEM_OFFSET		POWERPMC250_PCI_PHY_MEM_BASE
-
-#define POWERPMC250_SYS_MEM_BASE		0x80000000
-
-#define POWERPMC250_HAWK_SMC_BASE		0xfef80000
-
-#define POWERPMC250_BASE_BAUD		12288000
-#define POWERPMC250_SERIAL		0xff000000
-#define POWERPMC250_SERIAL_IRQ		20
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  1
-
-#define BASE_BAUD  (POWERPMC250_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-#define SERIAL_PORT_DFNS \
-	{ 0, BASE_BAUD, POWERPMC250_SERIAL, POWERPMC250_SERIAL_IRQ,	\
-		STD_COM_FLAGS, 				/* ttyS0 */	\
-		iomem_base: (u8 *)POWERPMC250_SERIAL,			\
-		iomem_reg_shift: 0,					\
-		io_type: SERIAL_IO_MEM }
-
-#endif /* __ASMPPC_POWERPMC250_H */
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
deleted file mode 100644
index cbcac85c7a78..000000000000
--- a/arch/ppc/platforms/pplus.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/*
- * Board and PCI setup routines for MCG PowerPlus
- *
- * Author: Randy Vinson <rvinson@mvista.com>
- *
- * Derived from original PowerPlus PReP work by
- * Cort Dougan, Johnnie Peters, Matt Porter, and
- * Troy Benjegerdes.
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/console.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/prep_nvram.h>
-#include <asm/vga.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/kgdb.h>
-#include <asm/reg.h>
-
-#include "pplus.h"
-
-#undef DUMP_DBATS
-
-TODC_ALLOC();
-
-extern void pplus_setup_hose(void);
-extern void pplus_set_VIA_IDE_native(void);
-
-extern unsigned long loops_per_jiffy;
-unsigned char *Motherboard_map_name;
-
-/* Tables for known hardware */
-
-/* Motorola Mesquite */
-static inline int
-mesquite_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 0 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{19, 19, 19, 19},	/* IDSEL 16 - PMC Slot 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 17 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 18 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 19 - unused */
-		{24, 25, 26, 27},	/* IDSEL 20 - P2P bridge (to cPCI 1) */
-		{ 0,  0,  0,  0},	/* IDSEL 21 - unused */
-		{28, 29, 30, 31}	/* IDSEL 22 - P2P bridge (to cPCI 2) */
-	};
-
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola Sitka */
-static inline int
-sitka_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 0 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PMC Slot 1 */
-		{28, 25, 26, 27},	/* IDSEL 17 - PMC Slot 2 */
-		{ 0,  0,  0,  0},	/* IDSEL 18 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 19 - unused */
-		{20,  0,  0,  0}	/* IDSEL 20 - P2P bridge (to cPCI) */
-	};
-
-	const long min_idsel = 14, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX */
-static inline int
-MTX_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - unused */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet   */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PMC Slot 1 */
-		{26, 27, 28, 25},	/* IDSEL 17 - PMC Slot 2 */
-		{27, 28, 25, 26}	/* IDSEL 18 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 12, max_idsel = 18, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX Plus */
-/* Secondary bus interrupt routing is not supported yet */
-static inline int
-MTXplus_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - unused */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PCI Slot 1P */
-		{26, 27, 28, 25},	/* IDSEL 17 - PCI Slot 2P */
-		{27, 28, 25, 26},	/* IDSEL 18 - PCI Slot 3P */
-		{26,  0,  0,  0},	/* IDSEL 19 - Enet 2 */
-		{ 0,  0,  0,  0}	/* IDSEL 20 - P2P Bridge */
-	};
-
-	const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static inline int
-Genesis2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	/* 2600
-	 * Raven 31
-	 * ISA   11
-	 * SCSI  12 - IRQ3
-	 * Univ  13
-	 * eth   14 - IRQ2
-	 * VGA   15 - IRQ4
-	 * PMC1  16 - IRQ9,10,11,12 = PMC1 A-D
-	 * PMC2  17 - IRQ12,9,10,11 = A-D
-	 * SCSI2 18 - IRQ11
-	 * eth2  19 - IRQ10
-	 * PCIX  20 - IRQ9,10,11,12 = PCI A-D
-	 */
-
-	/* 2400
-	 * Hawk 31
-	 * ISA  11
-	 * Univ 13
-	 * eth  14 - IRQ2
-	 * PMC1 16 - IRQ9,10,11,12 = PMC A-D
-	 * PMC2 17 - IRQ12,9,10,11 = PMC A-D
-	 * PCIX 20 - IRQ9,10,11,12 = PMC A-D
-	 */
-
-	/* 2300
-	 * Raven 31
-	 * ISA   11
-	 * Univ  13
-	 * eth   14 - IRQ2
-	 * PMC1  16 - 9,10,11,12 = A-D
-	 * PMC2  17 - 9,10,11,12 = B,C,D,A
-	 */
-
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - Universe PCI - VME */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PCI/PMC Slot 1P */
-		{28, 25, 26, 27},	/* IDSEL 17 - PCI/PMC Slot 2P */
-		{27, 28, 25, 26},	/* IDSEL 18 - PCI Slot 3P */
-		{26,  0,  0,  0},	/* IDSEL 19 - Enet 2 */
-		{25, 26, 27, 28}	/* IDSEL 20 - P2P Bridge */
-	};
-
-	const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-#define MOTOROLA_CPUTYPE_REG	0x800
-#define MOTOROLA_BASETYPE_REG	0x803
-#define MPIC_RAVEN_ID		0x48010000
-#define	MPIC_HAWK_ID		0x48030000
-#define	MOT_PROC2_BIT		0x800
-
-static u_char pplus_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */
-	(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_FALCN_ECC_ERR */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_ETHERNET */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_GRAPHICS */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),
-};
-
-int mot_entry = -1;
-int prep_keybd_present = 1;
-int mot_multi = 0;
-
-struct brd_info {
-	/* 0x100 mask assumes for Raven and Hawk boards that the level/edge
-	 * are set */
-	int cpu_type;
-	/* 0x200 if this board has a Hawk chip. */
-	int base_type;
-	/* or'ed with 0x80 if this board should be checked for multi CPU */
-	int max_cpu;
-	const char *name;
-	int (*map_irq) (struct pci_dev *, unsigned char, unsigned char);
-};
-struct brd_info mot_info[] = {
-	{0x300, 0x00, 0x00, "MVME 2400", Genesis2_map_irq},
-	{0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", mesquite_map_irq},
-	{0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", sitka_map_irq},
-	{0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", mesquite_map_irq},
-	{0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_map_irq},
-	{0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_map_irq},
-	{0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_map_irq},
-	{0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_map_irq},
-	{0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_map_irq},
-	{0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_map_irq},
-	{0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_map_irq},
-	{0x000, 0x00, 0x00, "", NULL}
-};
-
-void __init pplus_set_board_type(void)
-{
-	unsigned char cpu_type;
-	unsigned char base_mod;
-	int entry;
-	unsigned short devid;
-	unsigned long *ProcInfo = NULL;
-
-	cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0;
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
-
-	for (entry = 0; mot_info[entry].cpu_type != 0; entry++) {
-		/* Check for Hawk chip */
-		if (mot_info[entry].cpu_type & 0x200) {
-			if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK)
-				continue;
-		} else {
-			/* store the system config register for later use. */
-			ProcInfo =
-			    (unsigned long *)ioremap(PPLUS_SYS_CONFIG_REG, 4);
-
-			/* Check non hawk boards */
-			if ((mot_info[entry].cpu_type & 0xff) != cpu_type)
-				continue;
-
-			if (mot_info[entry].base_type == 0) {
-				mot_entry = entry;
-				break;
-			}
-
-			if (mot_info[entry].base_type != base_mod)
-				continue;
-		}
-
-		if (!(mot_info[entry].max_cpu & 0x80)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* processor 1 not present and max processor zero indicated */
-		if ((*ProcInfo & MOT_PROC2_BIT)
-		    && !(mot_info[entry].max_cpu & 0x7f)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* processor 1 present and max processor zero indicated */
-		if (!(*ProcInfo & MOT_PROC2_BIT)
-		    && (mot_info[entry].max_cpu & 0x7f)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* Indicate to system if this is a multiprocessor board */
-		if (!(*ProcInfo & MOT_PROC2_BIT))
-			mot_multi = 1;
-	}
-
-	if (mot_entry == -1)
-		/* No particular cpu type found - assume Mesquite (MCP750) */
-		mot_entry = 1;
-
-	Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name;
-	ppc_md.pci_map_irq = mot_info[mot_entry].map_irq;
-}
-void __init pplus_pib_init(void)
-{
-	unsigned char reg;
-	unsigned short short_reg;
-
-	struct pci_dev *dev = NULL;
-
-	/*
-	 * Perform specific configuration for the Via Tech or
-	 * or Winbond PCI-ISA-Bridge part.
-	 */
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_1, dev))) {
-		/*
-		 * PPCBUG does not set the enable bits
-		 * for the IDE device. Force them on here.
-		 */
-		pci_read_config_byte(dev, 0x40, &reg);
-
-		reg |= 0x03;	/* IDE: Chip Enable Bits */
-		pci_write_config_byte(dev, 0x40, reg);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_2,
-				   dev)) && (dev->devfn = 0x5a)) {
-		/* Force correct USB interrupt */
-		dev->irq = 11;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_83C553, dev))) {
-		/* Clear PCI Interrupt Routing Control Register. */
-		short_reg = 0x0000;
-		pci_write_config_word(dev, 0x44, short_reg);
-		/* Route IDE interrupts to IRQ 14 */
-		reg = 0xEE;
-		pci_write_config_byte(dev, 0x43, reg);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_82C105, dev))) {
-		/*
-		 * Disable LEGIRQ mode so PCI INTS are routed
-		 * directly to the 8259 and enable both channels
-		 */
-		pci_write_config_dword(dev, 0x40, 0x10ff0033);
-
-		/* Force correct IDE interrupt */
-		dev->irq = 14;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-	pci_dev_put(dev);
-}
-
-void __init pplus_set_VIA_IDE_legacy(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-			(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-		unsigned char temp;
-
-		/* put back original "standard" port base addresses */
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_0, 0x1f1);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_1, 0x3f5);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_2, 0x171);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_3, 0x375);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_4, 0xcc01);
-
-		/* put into legacy mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp &= ~0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-void pplus_set_VIA_IDE_native(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-			(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-		unsigned char temp;
-
-		/* put into native mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp |= 0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-void __init pplus_pcibios_fixup(void)
-{
-
-	unsigned char reg;
-	unsigned short devid;
-	unsigned char base_mod;
-
-	printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n",
-			Motherboard_map_name);
-
-	/* Setup the Winbond or Via PIB */
-	pplus_pib_init();
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	/* This is a hack.  If this is a 2300 or 2400 mot board then there is
-	 * no keyboard controller and we have to indicate that.
-	 */
-
-	early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) ||
-	    (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1))
-		prep_keybd_present = 0;
-}
-
-void __init pplus_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = PREP_ISA_MEM_BASE;
-	hose->io_base_virt = (void *)PREP_ISA_IO_BASE;
-
-	pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START,
-			  PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge");
-	pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START,
-			  PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM,
-			  "PCI host bridge");
-
-	hose->io_space.start = PPLUS_PCI_IO_START;
-	hose->io_space.end = PPLUS_PCI_IO_END;
-	hose->mem_space.start = PPLUS_PCI_MEM_START;
-	hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE;
-
-	if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
-				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
-				PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END,
-				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
-			!= 0) {
-		printk(KERN_CRIT "Could not initialize host bridge\n");
-
-	}
-
-	pplus_set_VIA_IDE_legacy();
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup = pplus_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-}
-
-static int pplus_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola MCG\n");
-	seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name);
-
-	return 0;
-}
-
-static void __init pplus_setup_arch(void)
-{
-	struct pci_controller *hose;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: enter", 0);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: find_bridges", 0);
-
-	/* Setup PCI host bridge */
-	pplus_find_bridges();
-
-	hose = pci_bus_to_hose(0);
-	isa_io_base = (ulong) hose->io_base_virt;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: set_board_type", 0);
-
-	pplus_set_board_type();
-
-	/* Enable L2.  Assume we don't need to flush -- Cort */
-	*(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk(KERN_INFO "Motorola PowerPlus Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-#ifdef CONFIG_VGA_CONSOLE
-	/* remap the VGA memory */
-	vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE,
-						   0x08000000);
-	conswitchp = &vga_con;
-#endif
-#ifdef CONFIG_PPCBUG_NVRAM
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if (cmd_line[0] == '\0') {
-		char *bootargs;
-		bootargs = prep_nvram_get_var("bootargs");
-		if (bootargs != NULL) {
-			strcpy(cmd_line, bootargs);
-			/* again.. */
-			strcpy(boot_command_line, cmd_line);
-		}
-	}
-#endif
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: exit", 0);
-}
-
-static void pplus_restart(char *cmd)
-{
-	unsigned long i = 10000;
-
-	local_irq_disable();
-
-	/* set VIA IDE controller into native mode */
-	pplus_set_VIA_IDE_native();
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb(inb(0x92) & ~1L, 0x92);
-	/* signal a reset to system control port A - soft reset */
-	outb(inb(0x92) | 1, 0x92);
-
-	while (i != 0)
-		i++;
-	panic("restart failed\n");
-}
-
-static void pplus_halt(void)
-{
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(MSR_EE, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb(inb(0x92) & ~1L, 0x92);
-	/* signal a reset to system control port A - soft reset */
-	outb(inb(0x92) | 1, 0x92);
-
-	while (1) ;
-	/*
-	 * Not reached
-	 */
-}
-
-static void pplus_power_off(void)
-{
-	pplus_halt();
-}
-
-static void __init pplus_init_IRQ(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("init_irq: enter", 0);
-
-	OpenPIC_InitSenses = pplus_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses);
-
-	if (OpenPIC_Addr != NULL) {
-
-		openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-		openpic_init(NUM_8259_INTERRUPTS);
-		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-					i8259_irq);
-		ppc_md.get_irq = openpic_get_irq;
-	}
-
-	i8259_init(0, 0);
-
-	if (ppc_md.progress)
-		ppc_md.progress("init_irq: exit", 0);
-}
-
-#ifdef CONFIG_SMP
-/* PowerPlus (MTX) support */
-static int __init smp_pplus_probe(void)
-{
-	extern int mot_multi;
-
-	if (mot_multi) {
-		openpic_request_IPIs();
-		smp_hw_index[1] = 1;
-		return 2;
-	}
-
-	return 1;
-}
-
-static void __init smp_pplus_kick_cpu(int nr)
-{
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory");
-	printk(KERN_INFO "CPU1 reset, waiting\n");
-}
-
-static void __init smp_pplus_setup_cpu(int cpu_nr)
-{
-	if (OpenPIC_Addr)
-		do_openpic_setup_cpu();
-}
-
-static struct smp_ops_t pplus_smp_ops = {
-	smp_openpic_message_pass,
-	smp_pplus_probe,
-	smp_pplus_kick_cpu,
-	smp_pplus_setup_cpu,
-	.give_timebase = smp_generic_give_timebase,
-	.take_timebase = smp_generic_take_timebase,
-};
-#endif				/* CONFIG_SMP */
-
-#ifdef DUMP_DBATS
-static void print_dbat(int idx, u32 bat)
-{
-
-	char str[64];
-
-	sprintf(str, "DBAT%c%c = 0x%08x\n",
-		(char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat);
-	ppc_md.progress(str, 0);
-}
-
-#define DUMP_DBAT(x) \
-	do { \
-	u32 __temp = mfspr(x);\
-	print_dbat(x, __temp); \
-	} while (0)
-
-static void dump_dbats(void)
-{
-	if (ppc_md.progress) {
-		DUMP_DBAT(DBAT0U);
-		DUMP_DBAT(DBAT0L);
-		DUMP_DBAT(DBAT1U);
-		DUMP_DBAT(DBAT1L);
-		DUMP_DBAT(DBAT2U);
-		DUMP_DBAT(DBAT2L);
-		DUMP_DBAT(DBAT3U);
-		DUMP_DBAT(DBAT3L);
-	}
-}
-#endif
-
-static unsigned long __init pplus_find_end_of_memory(void)
-{
-	unsigned long total;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_find_end_of_memory", 0);
-
-#ifdef DUMP_DBATS
-	dump_dbats();
-#endif
-
-	total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE);
-	return (total);
-}
-
-static void __init pplus_map_io(void)
-{
-	io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000,
-			 _PAGE_IO);
-	io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO);
-}
-
-static void __init pplus_init2(void)
-{
-#ifdef CONFIG_NVRAM
-	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
-#endif
-	request_region(0x20, 0x20, "pic1");
-	request_region(0xa0, 0x20, "pic2");
-	request_region(0x00, 0x20, "dma1");
-	request_region(0x40, 0x20, "timer");
-	request_region(0x80, 0x10, "dma page reg");
-	request_region(0xc0, 0x20, "dma2");
-}
-
-/*
- * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3
- * to 0xf0000000 to access Falcon/Raven or Hawk registers
- */
-static __inline__ void pplus_set_bat(void)
-{
-	/* wait for all outstanding memory accesses to complete */
-	mb();
-
-	/* setup DBATs */
-	mtspr(SPRN_DBAT2U, 0x80001ffe);
-	mtspr(SPRN_DBAT2L, 0x8000002a);
-	mtspr(SPRN_DBAT3U, 0xf0001ffe);
-	mtspr(SPRN_DBAT3L, 0xf000002a);
-
-	/* wait for updates */
-	mb();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Map in board regs, etc. */
-	pplus_set_bat();
-
-	isa_io_base = PREP_ISA_IO_BASE;
-	isa_mem_base = PREP_ISA_MEM_BASE;
-	pci_dram_offset = PREP_PCI_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = pplus_setup_arch;
-	ppc_md.show_cpuinfo = pplus_show_cpuinfo;
-	ppc_md.init_IRQ = pplus_init_IRQ;
-	/* this gets changed later on if we have an OpenPIC -- Cort */
-	ppc_md.get_irq = i8259_irq;
-	ppc_md.init = pplus_init2;
-
-	ppc_md.restart = pplus_restart;
-	ppc_md.power_off = pplus_power_off;
-	ppc_md.halt = pplus_halt;
-
-	TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
-		  PREP_NVRAM_DATA, 8);
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-	ppc_md.nvram_read_val = todc_m48txx_read_val;
-	ppc_md.nvram_write_val = todc_m48txx_write_val;
-
-	ppc_md.find_end_of_memory = pplus_find_end_of_memory;
-	ppc_md.setup_io_mappings = pplus_map_io;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-#ifdef CONFIG_SMP
-	smp_ops = &pplus_smp_ops;
-#endif				/* CONFIG_SMP */
-}
diff --git a/arch/ppc/platforms/pplus.h b/arch/ppc/platforms/pplus.h
deleted file mode 100644
index a4bbaa8d858f..000000000000
--- a/arch/ppc/platforms/pplus.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
- *
- * Author: Mark A. Greerinclude/asm-ppc/hawk.h
- *         mgreer@mvista.com
- *
- * Modified by Randy Vinson (rvinson@mvista.com)
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PPLUS_H
-#define __PPC_PPLUS_H
-
-#include <asm/io.h>
-
-/*
- * Due to limitations imposed by legacy hardware (primarily IDE controllers),
- * the PPLUS boards operate using a PReP address map.
- *
- * From Processor (physical) -> PCI:
- *   PCI Mem Space: 0xc0000000 - 0xfe000000 -> 0x00000000 - 0x3e000000 (768 MB)
- *   PCI I/O Space: 0x80000000 - 0x90000000 -> 0x00000000 - 0x10000000 (256 MB)
- *	Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
- *
- * From PCI -> Processor (physical):
- *   System Memory: 0x80000000 -> 0x00000000
- */
-
-#define PPLUS_ISA_MEM_BASE		PREP_ISA_MEM_BASE
-#define PPLUS_ISA_IO_BASE		PREP_ISA_IO_BASE
-
-/* PCI Memory space mapping info */
-#define PPLUS_PCI_MEM_SIZE		0x30000000U
-#define PPLUS_PROC_PCI_MEM_START	PPLUS_ISA_MEM_BASE
-#define PPLUS_PROC_PCI_MEM_END		(PPLUS_PROC_PCI_MEM_START +	\
-					 PPLUS_PCI_MEM_SIZE - 1)
-#define PPLUS_PCI_MEM_START		0x00000000U
-#define PPLUS_PCI_MEM_END		(PPLUS_PCI_MEM_START +	\
-					 PPLUS_PCI_MEM_SIZE - 1)
-
-/* PCI I/O space mapping info */
-#define PPLUS_PCI_IO_SIZE		0x10000000U
-#define PPLUS_PROC_PCI_IO_START		PPLUS_ISA_IO_BASE
-#define PPLUS_PROC_PCI_IO_END		(PPLUS_PROC_PCI_IO_START +	\
-					 PPLUS_PCI_IO_SIZE - 1)
-#define PPLUS_PCI_IO_START		0x00000000U
-#define PPLUS_PCI_IO_END		(PPLUS_PCI_IO_START + 	\
-					 PPLUS_PCI_IO_SIZE - 1)
-/* System memory mapping info */
-#define PPLUS_PCI_DRAM_OFFSET		PREP_PCI_DRAM_OFFSET
-#define PPLUS_PCI_PHY_MEM_OFFSET	(PPLUS_ISA_MEM_BASE-PPLUS_PCI_MEM_START)
-
-/* Define base addresses for important sets of registers */
-#define PPLUS_HAWK_SMC_BASE		0xfef80000U
-#define PPLUS_HAWK_PPC_REG_BASE		0xfeff0000U
-#define PPLUS_SYS_CONFIG_REG		0xfef80400U
-#define PPLUS_L2_CONTROL_REG		0x8000081cU
-
-#define PPLUS_VGA_MEM_BASE		0xf0000000U
-
-#endif	/* __PPC_PPLUS_H */
diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c
deleted file mode 100644
index 8ed433e2a5c7..000000000000
--- a/arch/ppc/platforms/prep_pci.c
+++ /dev/null
@@ -1,1339 +0,0 @@
-/*
- * PReP pci functions.
- * Originally by Gary Thomas
- * rewritten and updated by Cort Dougan (cort@cs.nmt.edu)
- *
- * The motherboard routes/maps will disappear shortly. -- Cort
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/sections.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/ptrace.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/residual.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-
-extern void (*setup_ibm_pci)(char *irq_lo, char *irq_hi);
-
-/* Which PCI interrupt line does a given device [slot] use? */
-/* Note: This really should be two dimensional based in slot/pin used */
-static unsigned char *Motherboard_map;
-unsigned char *Motherboard_map_name;
-
-/* How is the 82378 PIRQ mapping setup? */
-static unsigned char *Motherboard_routes;
-
-static void (*Motherboard_non0)(struct pci_dev *);
-
-static void Powerplus_Map_Non0(struct pci_dev *);
-
-/* Used for Motorola to store system config register */
-static unsigned long	*ProcInfo;
-
-/* Tables for known hardware */
-
-/* Motorola PowerStackII - Utah */
-static char Utah_pci_IRQ_map[23] =
-{
-        0,   /* Slot 0  - unused */
-        0,   /* Slot 1  - unused */
-        5,   /* Slot 2  - SCSI - NCR825A  */
-        0,   /* Slot 3  - unused */
-        3,   /* Slot 4  - Ethernet - DEC2114x */
-        0,   /* Slot 5  - unused */
-        2,   /* Slot 6  - PCI Card slot #1 */
-        3,   /* Slot 7  - PCI Card slot #2 */
-        5,   /* Slot 8  - PCI Card slot #3 */
-        5,   /* Slot 9  - PCI Bridge */
-             /* added here in case we ever support PCI bridges */
-             /* Secondary PCI bus cards are at slot-9,6 & slot-9,7 */
-        0,   /* Slot 10 - unused */
-        0,   /* Slot 11 - unused */
-        5,   /* Slot 12 - SCSI - NCR825A */
-        0,   /* Slot 13 - unused */
-        3,   /* Slot 14 - enet */
-        0,   /* Slot 15 - unused */
-        2,   /* Slot 16 - unused */
-        3,   /* Slot 17 - unused */
-        5,   /* Slot 18 - unused */
-        0,   /* Slot 19 - unused */
-        0,   /* Slot 20 - unused */
-        0,   /* Slot 21 - unused */
-        0,   /* Slot 22 - unused */
-};
-
-static char Utah_pci_IRQ_routes[] =
-{
-        0,   /* Line 0 - Unused */
-        9,   /* Line 1 */
-	10,  /* Line 2 */
-        11,  /* Line 3 */
-        14,  /* Line 4 */
-        15,  /* Line 5 */
-};
-
-/* Motorola PowerStackII - Omaha */
-/* no integrated SCSI or ethernet */
-static char Omaha_pci_IRQ_map[23] =
-{
-        0,   /* Slot 0  - unused */
-        0,   /* Slot 1  - unused */
-        3,   /* Slot 2  - Winbond EIDE */
-        0,   /* Slot 3  - unused */
-        0,   /* Slot 4  - unused */
-        0,   /* Slot 5  - unused */
-        1,   /* Slot 6  - PCI slot 1 */
-        2,   /* Slot 7  - PCI slot 2  */
-        3,   /* Slot 8  - PCI slot 3 */
-        4,   /* Slot 9  - PCI slot 4 */ /* needs indirect access */
-        0,   /* Slot 10 - unused */
-        0,   /* Slot 11 - unused */
-        0,   /* Slot 12 - unused */
-        0,   /* Slot 13 - unused */
-        0,   /* Slot 14 - unused */
-        0,   /* Slot 15 - unused */
-        1,   /* Slot 16  - PCI slot 1 */
-        2,   /* Slot 17  - PCI slot 2  */
-        3,   /* Slot 18  - PCI slot 3 */
-        4,   /* Slot 19  - PCI slot 4 */ /* needs indirect access */
-        0,
-        0,
-        0,
-};
-
-static char Omaha_pci_IRQ_routes[] =
-{
-        0,   /* Line 0 - Unused */
-        9,   /* Line 1 */
-        11,  /* Line 2 */
-        14,  /* Line 3 */
-        15   /* Line 4 */
-};
-
-/* Motorola PowerStack */
-static char Blackhawk_pci_IRQ_map[19] =
-{
-  	0,	/* Slot 0  - unused */
-  	0,	/* Slot 1  - unused */
-  	0,	/* Slot 2  - unused */
-  	0,	/* Slot 3  - unused */
-  	0,	/* Slot 4  - unused */
-  	0,	/* Slot 5  - unused */
-  	0,	/* Slot 6  - unused */
-  	0,	/* Slot 7  - unused */
-  	0,	/* Slot 8  - unused */
-  	0,	/* Slot 9  - unused */
-  	0,	/* Slot 10 - unused */
-  	0,	/* Slot 11 - unused */
-  	3,	/* Slot 12 - SCSI */
-  	0,	/* Slot 13 - unused */
-  	1,	/* Slot 14 - Ethernet */
-  	0,	/* Slot 15 - unused */
- 	1,	/* Slot P7 */
- 	2,	/* Slot P6 */
- 	3,	/* Slot P5 */
-};
-
-static char Blackhawk_pci_IRQ_routes[] =
-{
-   	0,	/* Line 0 - Unused */
-   	9,	/* Line 1 */
-   	11,	/* Line 2 */
-   	15,	/* Line 3 */
-   	15	/* Line 4 */
-};
-
-/* Motorola Mesquite */
-static char Mesquite_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	0,	/* Slot 2  - unused */
-	0,	/* Slot 3  - unused */
-	0,	/* Slot 4  - unused */
-	0,	/* Slot 5  - unused */
-	0,	/* Slot 6  - unused */
-	0,	/* Slot 7  - unused */
-	0,	/* Slot 8  - unused */
-	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - unused */
-	0,	/* Slot 12 - unused */
-	0,	/* Slot 13 - unused */
-	2,	/* Slot 14 - Ethernet */
-	0,	/* Slot 15 - unused */
-	3,	/* Slot 16 - PMC */
-	0,	/* Slot 17 - unused */
-	0,	/* Slot 18 - unused */
-	0,	/* Slot 19 - unused */
-	0,	/* Slot 20 - unused */
-	0,	/* Slot 21 - unused */
-	0,	/* Slot 22 - unused */
-};
-
-/* Motorola Sitka */
-static char Sitka_pci_IRQ_map[21] =
-{
-	0,      /* Slot 0  - unused */
-	0,      /* Slot 1  - unused */
-	0,      /* Slot 2  - unused */
-	0,      /* Slot 3  - unused */
-	0,      /* Slot 4  - unused */
-	0,      /* Slot 5  - unused */
-	0,      /* Slot 6  - unused */
-	0,      /* Slot 7  - unused */
-	0,      /* Slot 8  - unused */
-	0,      /* Slot 9  - unused */
-	0,      /* Slot 10 - unused */
-	0,      /* Slot 11 - unused */
-	0,      /* Slot 12 - unused */
-	0,      /* Slot 13 - unused */
-	2,      /* Slot 14 - Ethernet */
-	0,      /* Slot 15 - unused */
-	9,      /* Slot 16 - PMC 1  */
-	12,     /* Slot 17 - PMC 2  */
-	0,      /* Slot 18 - unused */
-	0,      /* Slot 19 - unused */
-	4,      /* Slot 20 - NT P2P bridge */
-};
-
-/* Motorola MTX */
-static char MTX_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	0,	/* Slot 2  - unused */
-	0,	/* Slot 3  - unused */
-	0,	/* Slot 4  - unused */
-	0,	/* Slot 5  - unused */
-	0,	/* Slot 6  - unused */
-	0,	/* Slot 7  - unused */
-	0,	/* Slot 8  - unused */
-	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - unused */
-	3,	/* Slot 12 - SCSI */
-	0,	/* Slot 13 - unused */
-	2,	/* Slot 14 - Ethernet */
-	0,	/* Slot 15 - unused */
-	9,      /* Slot 16 - PCI/PMC slot 1 */
-	10,     /* Slot 17 - PCI/PMC slot 2 */
-	11,     /* Slot 18 - PCI slot 3 */
-	0,	/* Slot 19 - unused */
-	0,	/* Slot 20 - unused */
-	0,	/* Slot 21 - unused */
-	0,	/* Slot 22 - unused */
-};
-
-/* Motorola MTX Plus */
-/* Secondary bus interrupt routing is not supported yet */
-static char MTXplus_pci_IRQ_map[23] =
-{
-        0,      /* Slot 0  - unused */
-        0,      /* Slot 1  - unused */
-        0,      /* Slot 2  - unused */
-        0,      /* Slot 3  - unused */
-        0,      /* Slot 4  - unused */
-        0,      /* Slot 5  - unused */
-        0,      /* Slot 6  - unused */
-        0,      /* Slot 7  - unused */
-        0,      /* Slot 8  - unused */
-        0,      /* Slot 9  - unused */
-        0,      /* Slot 10 - unused */
-        0,      /* Slot 11 - unused */
-        3,      /* Slot 12 - SCSI */
-        0,      /* Slot 13 - unused */
-        2,      /* Slot 14 - Ethernet 1 */
-        0,      /* Slot 15 - unused */
-        9,      /* Slot 16 - PCI slot 1P */
-        10,     /* Slot 17 - PCI slot 2P */
-        11,     /* Slot 18 - PCI slot 3P */
-        10,     /* Slot 19 - Ethernet 2 */
-        0,      /* Slot 20 - P2P Bridge */
-        0,      /* Slot 21 - unused */
-        0,      /* Slot 22 - unused */
-};
-
-static char Raven_pci_IRQ_routes[] =
-{
-   	0,	/* This is a dummy structure */
-};
-
-/* Motorola MVME16xx */
-static char Genesis_pci_IRQ_map[16] =
-{
-  	0,	/* Slot 0  - unused */
-  	0,	/* Slot 1  - unused */
-  	0,	/* Slot 2  - unused */
-  	0,	/* Slot 3  - unused */
-  	0,	/* Slot 4  - unused */
-  	0,	/* Slot 5  - unused */
-  	0,	/* Slot 6  - unused */
-  	0,	/* Slot 7  - unused */
-  	0,	/* Slot 8  - unused */
-  	0,	/* Slot 9  - unused */
-  	0,	/* Slot 10 - unused */
-  	0,	/* Slot 11 - unused */
-  	3,	/* Slot 12 - SCSI */
-  	0,	/* Slot 13 - unused */
-  	1,	/* Slot 14 - Ethernet */
-  	0,	/* Slot 15 - unused */
-};
-
-static char Genesis_pci_IRQ_routes[] =
-{
-   	0,	/* Line 0 - Unused */
-   	10,	/* Line 1 */
-   	11,	/* Line 2 */
-   	14,	/* Line 3 */
-   	15	/* Line 4 */
-};
-
-static char Genesis2_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	0,	/* Slot 2  - unused */
-	0,	/* Slot 3  - unused */
-	0,	/* Slot 4  - unused */
-	0,	/* Slot 5  - unused */
-	0,	/* Slot 6  - unused */
-	0,	/* Slot 7  - unused */
-	0,	/* Slot 8  - unused */
-	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - IDE */
-	3,	/* Slot 12 - SCSI */
-	5,	/* Slot 13 - Universe PCI - VME Bridge */
-	2,	/* Slot 14 - Ethernet */
-	0,	/* Slot 15 - unused */
-	9,	/* Slot 16 - PMC 1 */
-	12,	/* Slot 17 - pci */
-	11,	/* Slot 18 - pci */
-	10,	/* Slot 19 - pci */
-	0,	/* Slot 20 - pci */
-	0,	/* Slot 21 - unused */
-	0,	/* Slot 22 - unused */
-};
-
-/* Motorola Series-E */
-static char Comet_pci_IRQ_map[23] =
-{
-  	0,	/* Slot 0  - unused */
-  	0,	/* Slot 1  - unused */
-  	0,	/* Slot 2  - unused */
-  	0,	/* Slot 3  - unused */
-  	0,	/* Slot 4  - unused */
-  	0,	/* Slot 5  - unused */
-  	0,	/* Slot 6  - unused */
-  	0,	/* Slot 7  - unused */
-  	0,	/* Slot 8  - unused */
-  	0,	/* Slot 9  - unused */
-  	0,	/* Slot 10 - unused */
-  	0,	/* Slot 11 - unused */
-  	3,	/* Slot 12 - SCSI */
-  	0,	/* Slot 13 - unused */
-  	1,	/* Slot 14 - Ethernet */
-  	0,	/* Slot 15 - unused */
-	1,	/* Slot 16 - PCI slot 1 */
-	2,	/* Slot 17 - PCI slot 2 */
-	3,	/* Slot 18 - PCI slot 3 */
-	4,	/* Slot 19 - PCI bridge */
-	0,
-	0,
-	0,
-};
-
-static char Comet_pci_IRQ_routes[] =
-{
-   	0,	/* Line 0 - Unused */
-   	10,	/* Line 1 */
-   	11,	/* Line 2 */
-   	14,	/* Line 3 */
-   	15	/* Line 4 */
-};
-
-/* Motorola Series-EX */
-static char Comet2_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	3,	/* Slot 2  - SCSI - NCR825A */
-	0,	/* Slot 3  - unused */
-	1,	/* Slot 4  - Ethernet - DEC2104X */
-	0,	/* Slot 5  - unused */
-	1,	/* Slot 6  - PCI slot 1 */
-	2,	/* Slot 7  - PCI slot 2 */
-	3,	/* Slot 8  - PCI slot 3 */
-	4,	/* Slot 9  - PCI bridge  */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - unused */
-	3,	/* Slot 12 - SCSI - NCR825A */
-	0,	/* Slot 13 - unused */
-	1,	/* Slot 14 - Ethernet - DEC2104X */
-	0,	/* Slot 15 - unused */
-	1,	/* Slot 16 - PCI slot 1 */
-	2,	/* Slot 17 - PCI slot 2 */
-	3,	/* Slot 18 - PCI slot 3 */
-	4,	/* Slot 19 - PCI bridge */
-	0,
-	0,
-	0,
-};
-
-static char Comet2_pci_IRQ_routes[] =
-{
-	0,	/* Line 0 - Unused */
-	10,	/* Line 1 */
-	11,	/* Line 2 */
-	14,	/* Line 3 */
-	15,	/* Line 4 */
-};
-
-/*
- * ibm 830 (and 850?).
- * This is actually based on the Carolina motherboard
- * -- Cort
- */
-static char ibm8xx_pci_IRQ_map[23] = {
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 - FireCoral */
-        4, /* Slot 12 - Ethernet  PCIINTD# */
-        2, /* Slot 13 - PCI Slot #2 */
-        2, /* Slot 14 - S3 Video PCIINTD# */
-        0, /* Slot 15 - onboard SCSI (INDI) [1] */
-        3, /* Slot 16 - NCR58C810 RS6000 Only PCIINTC# */
-        0, /* Slot 17 - unused */
-        2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */
-        0, /* Slot 19 - unused */
-        0, /* Slot 20 - unused */
-        0, /* Slot 21 - unused */
-        2, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */
-};
-
-static char ibm8xx_pci_IRQ_routes[] = {
-        0,      /* Line 0 - unused */
-        15,     /* Line 1 */
-        15,     /* Line 2 */
-        15,     /* Line 3 */
-        15,     /* Line 4 */
-};
-
-/*
- * a 6015 ibm board
- * -- Cort
- */
-static char ibm6015_pci_IRQ_map[23] = {
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 -  */
-        1, /* Slot 12 - SCSI */
-        2, /* Slot 13 -  */
-        2, /* Slot 14 -  */
-        1, /* Slot 15 -  */
-        1, /* Slot 16 -  */
-        0, /* Slot 17 -  */
-        2, /* Slot 18 -  */
-        0, /* Slot 19 -  */
-        0, /* Slot 20 -  */
-        0, /* Slot 21 -  */
-        2, /* Slot 22 -  */
-};
-
-static char ibm6015_pci_IRQ_routes[] = {
-        0,      /* Line 0 - unused */
-        13,     /* Line 1 */
-        15,     /* Line 2 */
-        15,     /* Line 3 */
-        15,     /* Line 4 */
-};
-
-
-/* IBM Nobis and Thinkpad 850 */
-static char Nobis_pci_IRQ_map[23] ={
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 - unused */
-        3, /* Slot 12 - SCSI */
-        0, /* Slot 13 - unused */
-        0, /* Slot 14 - unused */
-        0, /* Slot 15 - unused */
-};
-
-static char Nobis_pci_IRQ_routes[] = {
-        0, /* Line 0 - Unused */
-        13, /* Line 1 */
-        13, /* Line 2 */
-        13, /* Line 3 */
-        13      /* Line 4 */
-};
-
-/*
- * IBM RS/6000 43p/140  -- paulus
- * XXX we should get all this from the residual data
- */
-static char ibm43p_pci_IRQ_map[23] = {
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 - FireCoral ISA bridge */
-        6, /* Slot 12 - Ethernet  */
-        0, /* Slot 13 - openpic */
-        0, /* Slot 14 - unused */
-        0, /* Slot 15 - unused */
-        7, /* Slot 16 - NCR58C825a onboard scsi */
-        0, /* Slot 17 - unused */
-        2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */
-        0, /* Slot 19 - unused */
-        0, /* Slot 20 - unused */
-        0, /* Slot 21 - unused */
-        1, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */
-};
-
-static char ibm43p_pci_IRQ_routes[] = {
-        0,      /* Line 0 - unused */
-        15,     /* Line 1 */
-        15,     /* Line 2 */
-        15,     /* Line 3 */
-        15,     /* Line 4 */
-};
-
-/* Motorola PowerPlus architecture PCI IRQ tables */
-/* Interrupt line values for INTA-D on primary/secondary MPIC inputs */
-
-struct powerplus_irq_list
-{
-	unsigned char primary[4];       /* INT A-D */
-	unsigned char secondary[4];     /* INT A-D */
-};
-
-/*
- * For standard PowerPlus boards, bus 0 PCI INTs A-D are routed to
- * OpenPIC inputs 9-12.  PCI INTs A-D from the on board P2P bridge
- * are routed to OpenPIC inputs 5-8.  These values are offset by
- * 16 in the table to reflect the Linux kernel interrupt value.
- */
-struct powerplus_irq_list Powerplus_pci_IRQ_list =
-{
-	{25, 26, 27, 28},
-	{21, 22, 23, 24}
-};
-
-/*
- * For the MCP750 (system slot board), cPCI INTs A-D are routed to
- * OpenPIC inputs 8-11 and the PMC INTs A-D are routed to OpenPIC
- * input 3.  On a hot swap MCP750, the companion card PCI INTs A-D
- * are routed to OpenPIC inputs 12-15. These values are offset by
- * 16 in the table to reflect the Linux kernel interrupt value.
- */
-struct powerplus_irq_list Mesquite_pci_IRQ_list =
-{
-	{24, 25, 26, 27},
-	{28, 29, 30, 31}
-};
-
-/*
- * This table represents the standard PCI swizzle defined in the
- * PCI bus specification.
- */
-static unsigned char prep_pci_intpins[4][4] =
-{
-	{ 1, 2, 3, 4},  /* Buses 0, 4, 8, ... */
-	{ 2, 3, 4, 1},  /* Buses 1, 5, 9, ... */
-	{ 3, 4, 1, 2},  /* Buses 2, 6, 10 ... */
-	{ 4, 1, 2, 3},  /* Buses 3, 7, 11 ... */
-};
-
-/* We have to turn on LEVEL mode for changed IRQs */
-/* All PCI IRQs need to be level mode, so this should be something
- * other than hard-coded as well... IRQs are individually mappable
- * to either edge or level.
- */
-
-/*
- * 8259 edge/level control definitions
- */
-#define ISA8259_M_ELCR 0x4d0
-#define ISA8259_S_ELCR 0x4d1
-
-#define ELCRS_INT15_LVL         0x80
-#define ELCRS_INT14_LVL         0x40
-#define ELCRS_INT12_LVL         0x10
-#define ELCRS_INT11_LVL         0x08
-#define ELCRS_INT10_LVL         0x04
-#define ELCRS_INT9_LVL          0x02
-#define ELCRS_INT8_LVL          0x01
-#define ELCRM_INT7_LVL          0x80
-#define ELCRM_INT5_LVL          0x20
-
-#if 0
-/*
- * PCI config space access.
- */
-#define CFGADDR(dev)	((1<<(dev>>3)) | ((dev&7)<<8))
-#define DEVNO(dev)	(dev>>3)
-
-#define MIN_DEVNR	11
-#define MAX_DEVNR	22
-
-static int
-prep_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-
-	if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR
-	    || DEVNO(devfn) > MAX_DEVNR)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + CFGADDR(devfn) + offset;
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-prep_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-
-	if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR
-	    || DEVNO(devfn) > MAX_DEVNR)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + CFGADDR(devfn) + offset;
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops prep_pci_ops =
-{
-	prep_read_config,
-	prep_write_config
-};
-#endif
-
-#define MOTOROLA_CPUTYPE_REG	0x800
-#define MOTOROLA_BASETYPE_REG	0x803
-#define MPIC_RAVEN_ID		0x48010000
-#define	MPIC_HAWK_ID		0x48030000
-#define	MOT_PROC2_BIT		0x800
-
-static u_char prep_openpic_initsenses[] __initdata = {
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */
-    (IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_FALCN_ECC_ERR */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_ETHERNET */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_GRAPHICS */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */
-};
-
-#define MOT_RAVEN_PRESENT	0x1
-#define MOT_HAWK_PRESENT	0x2
-
-int mot_entry = -1;
-int prep_keybd_present = 1;
-int MotMPIC;
-int mot_multi;
-
-int __init
-raven_init(void)
-{
-	unsigned int	devid;
-	unsigned int	pci_membase;
-	unsigned char	base_mod;
-
-	/* Check to see if the Raven chip exists. */
-	if ( _prep_type != _PREP_Motorola) {
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-	/* Check to see if this board is a type that might have a Raven. */
-	if ((inb(MOTOROLA_CPUTYPE_REG) & 0xF0) != 0xE0) {
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-	/* Check the first PCI device to see if it is a Raven. */
-	early_read_config_dword(NULL, 0, 0, PCI_VENDOR_ID, &devid);
-
-	switch (devid & 0xffff0000) {
-	case MPIC_RAVEN_ID:
-		MotMPIC = MOT_RAVEN_PRESENT;
-		break;
-	case MPIC_HAWK_ID:
-		MotMPIC = MOT_HAWK_PRESENT;
-		break;
-	default:
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-
-	/* Read the memory base register. */
-	early_read_config_dword(NULL, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
-
-	if (pci_membase == 0) {
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-	/* Map the Raven MPIC registers to virtual memory. */
-	OpenPIC_Addr = ioremap(pci_membase+0xC0000000, 0x22000);
-
-	OpenPIC_InitSenses = prep_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses);
-
-	ppc_md.get_irq = openpic_get_irq;
-
-	/* If raven is present on Motorola store the system config register
-	 * for later use.
-	 */
-	ProcInfo = (unsigned long *)ioremap(0xfef80400, 4);
-
-	/* Indicate to system if this is a multiprocessor board */
-	if (!(*ProcInfo & MOT_PROC2_BIT)) {
-		mot_multi = 1;
-	}
-
-	/* This is a hack.  If this is a 2300 or 2400 mot board then there is
-	 * no keyboard controller and we have to indicate that.
-	 */
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	if ((MotMPIC == MOT_HAWK_PRESENT) || (base_mod == 0xF9) ||
-	    (base_mod == 0xFA) || (base_mod == 0xE1))
-		prep_keybd_present = 0;
-
-	return 1;
-}
-
-struct mot_info {
-	int		cpu_type;	/* 0x100 mask assumes for Raven and Hawk boards that the level/edge are set */
-					/* 0x200 if this board has a Hawk chip. */
-	int		base_type;
-	int		max_cpu;	/* ored with 0x80 if this board should be checked for multi CPU */
-	const char	*name;
-	unsigned char	*map;
-	unsigned char	*routes;
-	void            (*map_non0_bus)(struct pci_dev *);      /* For boards with more than bus 0 devices. */
-	struct powerplus_irq_list *pci_irq_list; /* List of PCI MPIC inputs */
-	unsigned char   secondary_bridge_devfn; /* devfn of secondary bus transparent bridge */
-} mot_info[] = {
-	{0x300, 0x00, 0x00, "MVME 2400",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x010, 0x00, 0x00, "Genesis",				Genesis_pci_IRQ_map,	Genesis_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x020, 0x00, 0x00, "Powerstack (Series E)",		Comet_pci_IRQ_map,	Comet_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x040, 0x00, 0x00, "Blackhawk (Powerstack)",		Blackhawk_pci_IRQ_map,	Blackhawk_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x050, 0x00, 0x00, "Omaha (PowerStack II Pro3000)",	Omaha_pci_IRQ_map,	Omaha_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x060, 0x00, 0x00, "Utah (Powerstack II Pro4000)",	Utah_pci_IRQ_map,	Utah_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x0A0, 0x00, 0x00, "Powerstack (Series EX)",		Comet2_pci_IRQ_map,	Comet2_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)",		Mesquite_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)",		Sitka_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC",	Mesquite_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xC0},
-	{0x1E0, 0xF6, 0x80, "MTX Plus",				MTXplus_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0},
-	{0x1E0, 0xF6, 0x81, "Dual MTX Plus",			MTXplus_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0},
-	{0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port",		MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port",	MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port",		MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port",	MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF9, 0x00, "MVME 2300",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFA, 0x00, "MVME 2300SC/2600",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761",	Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFF, 0x00, "MVME 1600-001 or 1600-011",	Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x000, 0x00, 0x00, "",					NULL,			NULL, NULL, NULL, 0x00}
-};
-
-void __init
-ibm_prep_init(void)
-{
-	if (have_residual_data) {
-		u32 addr, real_addr, len, offset;
-		PPC_DEVICE *mpic;
-		PnP_TAG_PACKET *pkt;
-
-		/* Use the PReP residual data to determine if an OpenPIC is
-		 * present.  If so, get the large vendor packet which will
-		 * tell us the base address and length in memory.
-		 * If we are successful, ioremap the memory area and set
-		 * OpenPIC_Addr (this indicates that the OpenPIC was found).
-		 */
-		mpic = residual_find_device(-1, NULL, SystemPeripheral,
-				    ProgrammableInterruptController, MPIC, 0);
-		if (!mpic)
-			return;
-
-		pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap +
-				mpic->AllocatedOffset, 9, 0);
-
-		if (!pkt)
-			return;
-
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-	 	if (p.PPCData[1] == 32) {
-			switch (p.PPCData[0]) {
-				case 1:  offset = PREP_ISA_IO_BASE;  break;
-				case 2:  offset = PREP_ISA_MEM_BASE; break;
-				default: return; /* Not I/O or memory?? */
-			}
-		}
-		else
-			return; /* Not a 32-bit address */
-
-		real_addr = ld_le32((unsigned int *) (p.PPCData + 4));
-		if (real_addr == 0xffffffff)
-			return;
-
-		/* Adjust address to be as seen by CPU */
-		addr = real_addr + offset;
-
-		len = ld_le32((unsigned int *) (p.PPCData + 12));
-		if (!len)
-			return;
-#undef p
-		OpenPIC_Addr = ioremap(addr, len);
-		ppc_md.get_irq = openpic_get_irq;
-
-		OpenPIC_InitSenses = prep_openpic_initsenses;
-		OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses);
-
-		printk(KERN_INFO "MPIC at 0x%08x (0x%08x), length 0x%08x "
-		       "mapped to 0x%p\n", addr, real_addr, len, OpenPIC_Addr);
-	}
-}
-
-static void __init
-ibm43p_pci_map_non0(struct pci_dev *dev)
-{
-	unsigned char intpin;
-	static unsigned char bridge_intrs[4] = { 3, 4, 5, 8 };
-
-	if (dev == NULL)
-		return;
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin);
-	if (intpin < 1 || intpin > 4)
-		return;
-	intpin = (PCI_SLOT(dev->devfn) + intpin - 1) & 3;
-	dev->irq = openpic_to_irq(bridge_intrs[intpin]);
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-}
-
-void __init
-prep_residual_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	if (have_residual_data) {
-		Motherboard_map_name = res->VitalProductData.PrintableModel;
-		Motherboard_map = NULL;
-		Motherboard_routes = NULL;
-		residual_irq_mask(irq_edge_mask_lo, irq_edge_mask_hi);
-	}
-}
-
-void __init
-prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM 6015/7020 (Sandalfoot/Sandalbow)";
-	Motherboard_map = ibm6015_pci_IRQ_map;
-	Motherboard_routes = ibm6015_pci_IRQ_routes;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
-}
-
-void __init
-prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM Thinkpad 850/860";
-	Motherboard_map = Nobis_pci_IRQ_map;
-	Motherboard_routes = Nobis_pci_IRQ_routes;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
-}
-
-void __init
-prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM 7248, PowerSeries 830/850 (Carolina)";
-	Motherboard_map = ibm8xx_pci_IRQ_map;
-	Motherboard_routes = ibm8xx_pci_IRQ_routes;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA4; /* IRQs 10, 13, 15 level-triggered */
-}
-
-void __init
-prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM 43P-140 (Tiger1)";
-	Motherboard_map = ibm43p_pci_IRQ_map;
-	Motherboard_routes = ibm43p_pci_IRQ_routes;
-	Motherboard_non0 = ibm43p_pci_map_non0;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
-}
-
-void __init
-prep_route_pci_interrupts(void)
-{
-	unsigned char *ibc_pirq = (unsigned char *)0x80800860;
-	unsigned char *ibc_pcicon = (unsigned char *)0x80800840;
-	int i;
-
-	if ( _prep_type == _PREP_Motorola)
-	{
-		unsigned short irq_mode;
-		unsigned char  cpu_type;
-		unsigned char  base_mod;
-		int	       entry;
-
-		cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0;
-		base_mod = inb(MOTOROLA_BASETYPE_REG);
-
-		for (entry = 0; mot_info[entry].cpu_type != 0; entry++) {
-			if (mot_info[entry].cpu_type & 0x200) {		 	/* Check for Hawk chip */
-				if (!(MotMPIC & MOT_HAWK_PRESENT))
-					continue;
-			} else {						/* Check non hawk boards */
-				if ((mot_info[entry].cpu_type & 0xff) != cpu_type)
-					continue;
-
-				if (mot_info[entry].base_type == 0) {
-					mot_entry = entry;
-					break;
-				}
-
-				if (mot_info[entry].base_type != base_mod)
-					continue;
-			}
-
-			if (!(mot_info[entry].max_cpu & 0x80)) {
-				mot_entry = entry;
-				break;
-			}
-
-			/* processor 1 not present and max processor zero indicated */
-			if ((*ProcInfo & MOT_PROC2_BIT) && !(mot_info[entry].max_cpu & 0x7f)) {
-				mot_entry = entry;
-				break;
-			}
-
-			/* processor 1 present and max processor zero indicated */
-			if (!(*ProcInfo & MOT_PROC2_BIT) && (mot_info[entry].max_cpu & 0x7f)) {
-				mot_entry = entry;
-				break;
-			}
-		}
-
-		if (mot_entry == -1) 	/* No particular cpu type found - assume Blackhawk */
-			mot_entry = 3;
-
-		Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name;
-		Motherboard_map = mot_info[mot_entry].map;
-		Motherboard_routes = mot_info[mot_entry].routes;
-		Motherboard_non0 = mot_info[mot_entry].map_non0_bus;
-
-		if (!(mot_info[entry].cpu_type & 0x100)) {
-			/* AJF adjust level/edge control according to routes */
-			irq_mode = 0;
-			for (i = 1;  i <= 4;  i++)
-				irq_mode |= ( 1 << Motherboard_routes[i] );
-			outb( irq_mode & 0xff, 0x4d0 );
-			outb( (irq_mode >> 8) & 0xff, 0x4d1 );
-		}
-	} else if ( _prep_type == _PREP_IBM ) {
-		unsigned char irq_edge_mask_lo, irq_edge_mask_hi;
-		unsigned short irq_edge_mask;
-		int i;
-
-		setup_ibm_pci(&irq_edge_mask_lo, &irq_edge_mask_hi);
-
-		outb(inb(0x04d0)|irq_edge_mask_lo, 0x4d0); /* primary 8259 */
-		outb(inb(0x04d1)|irq_edge_mask_hi, 0x4d1); /* cascaded 8259 */
-
-		irq_edge_mask = (irq_edge_mask_hi << 8) | irq_edge_mask_lo;
-		for (i = 0; i < 16; ++i, irq_edge_mask >>= 1)
-			if (irq_edge_mask & 1)
-				irq_desc[i].status |= IRQ_LEVEL;
-	} else {
-		printk("No known machine pci routing!\n");
-		return;
-	}
-
-	/* Set up mapping from slots */
-	if (Motherboard_routes) {
-		for (i = 1;  i <= 4;  i++)
-			ibc_pirq[i-1] = Motherboard_routes[i];
-
-		/* Enable PCI interrupts */
-		*ibc_pcicon |= 0x20;
-	}
-}
-
-void __init
-prep_pib_init(void)
-{
-	unsigned char   reg;
-	unsigned short  short_reg;
-
-	struct pci_dev *dev = NULL;
-
-	if (( _prep_type == _PREP_Motorola) && (OpenPIC_Addr)) {
-		/*
-		 * Perform specific configuration for the Via Tech or
-		 * or Winbond PCI-ISA-Bridge part.
-		 */
-		if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-					PCI_DEVICE_ID_VIA_82C586_1, dev))) {
-			/*
-			 * PPCBUG does not set the enable bits
-			 * for the IDE device. Force them on here.
-			 */
-			pci_read_config_byte(dev, 0x40, &reg);
-
-			reg |= 0x03; /* IDE: Chip Enable Bits */
-			pci_write_config_byte(dev, 0x40, reg);
-		}
-		if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-						PCI_DEVICE_ID_VIA_82C586_2,
-						dev)) && (dev->devfn = 0x5a)) {
-			/* Force correct USB interrupt */
-			dev->irq = 11;
-			pci_write_config_byte(dev,
-					PCI_INTERRUPT_LINE,
-					dev->irq);
-		}
-		if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-					PCI_DEVICE_ID_WINBOND_83C553, dev))) {
-			 /* Clear PCI Interrupt Routing Control Register. */
-			short_reg = 0x0000;
-			pci_write_config_word(dev, 0x44, short_reg);
-			if (OpenPIC_Addr){
-				/* Route IDE interrupts to IRQ 14 */
-				reg = 0xEE;
-				pci_write_config_byte(dev, 0x43, reg);
-			}
-		}
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_82C105, dev))){
-		if (OpenPIC_Addr){
-			/*
-			 * Disable LEGIRQ mode so PCI INTS are routed
-			 * directly to the 8259 and enable both channels
-			 */
-			pci_write_config_dword(dev, 0x40, 0x10ff0033);
-
-			/* Force correct IDE interrupt */
-			dev->irq = 14;
-			pci_write_config_byte(dev,
-					PCI_INTERRUPT_LINE,
-					dev->irq);
-		} else {
-			/* Enable LEGIRQ for PCI INT -> 8259 IRQ routing */
-			pci_write_config_dword(dev, 0x40, 0x10ff08a1);
-		}
-	}
-	pci_dev_put(dev);
-}
-
-static void __init
-Powerplus_Map_Non0(struct pci_dev *dev)
-{
-	struct pci_bus  *pbus;          /* Parent bus structure pointer */
-	struct pci_dev  *tdev = dev;    /* Temporary device structure */
-	unsigned int    devnum;         /* Accumulated device number */
-	unsigned char   intline;        /* Linux interrupt value */
-	unsigned char   intpin;         /* PCI interrupt pin */
-
-	/* Check for valid PCI dev pointer */
-	if (dev == NULL) return;
-
-	/* Initialize bridge IDSEL variable */
-	devnum = PCI_SLOT(tdev->devfn);
-
-	/* Read the interrupt pin of the device and adjust for indexing */
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin);
-
-	/* If device doesn't request an interrupt, return */
-	if ( (intpin < 1) || (intpin > 4) )
-		return;
-
-	intpin--;
-
-	/*
-	 * Walk up to bus 0, adjusting the interrupt pin for the standard
-	 * PCI bus swizzle.
-	 */
-	do {
-		intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1;
-		pbus = tdev->bus;        /* up one level */
-		tdev = pbus->self;
-		devnum = PCI_SLOT(tdev->devfn);
-	} while(tdev->bus->number);
-
-	/* Use the primary interrupt inputs by default */
-	intline = mot_info[mot_entry].pci_irq_list->primary[intpin];
-
-	/*
-	 * If the board has secondary interrupt inputs, walk the bus and
-	 * note the devfn of the bridge from bus 0.  If it is the same as
-	 * the devfn of the bus bridge with secondary inputs, use those.
-	 * Otherwise, assume it's a PMC site and get the interrupt line
-	 * value from the interrupt routing table.
-	 */
-	if (mot_info[mot_entry].secondary_bridge_devfn) {
-		pbus = dev->bus;
-
-		while (pbus->primary != 0)
-			pbus = pbus->parent;
-
-		if ((pbus->self)->devfn != 0xA0) {
-			if ((pbus->self)->devfn == mot_info[mot_entry].secondary_bridge_devfn)
-				intline = mot_info[mot_entry].pci_irq_list->secondary[intpin];
-			else {
-				if ((char *)(mot_info[mot_entry].map) == (char *)Mesquite_pci_IRQ_map)
-					intline = mot_info[mot_entry].map[((pbus->self)->devfn)/8] + 16;
-				else {
-					int i;
-					for (i=0;i<3;i++)
-						intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1;
-					intline = mot_info[mot_entry].pci_irq_list->primary[intpin];
-				}
-			}
-		}
-	}
-
-	/* Write calculated interrupt value to header and device list */
-	dev->irq = intline;
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, (u8)dev->irq);
-}
-
-void __init
-prep_pcibios_fixup(void)
-{
-        struct pci_dev *dev = NULL;
-	int irq;
-	int have_openpic = (OpenPIC_Addr != NULL);
-
-	prep_route_pci_interrupts();
-
-	printk("Setting PCI interrupts for a \"%s\"\n", Motherboard_map_name);
-
-	/* Iterate through all the PCI devices, setting the IRQ */
-	for_each_pci_dev(dev) {
-		/*
-		 * If we have residual data, then this is easy: query the
-		 * residual data for the IRQ line allocated to the device.
-		 * This works the same whether we have an OpenPic or not.
-		 */
-		if (have_residual_data) {
-			irq = residual_pcidev_irq(dev);
-			dev->irq = have_openpic ? openpic_to_irq(irq) : irq;
-		}
-		/*
-		 * If we don't have residual data, then we need to use
-		 * tables to determine the IRQ.  The table organisation
-		 * is different depending on whether there is an OpenPIC
-		 * or not.  The tables are only used for bus 0, so check
-		 * this first.
-		 */
-		else if (dev->bus->number == 0) {
-			irq = Motherboard_map[PCI_SLOT(dev->devfn)];
-			dev->irq = have_openpic ? openpic_to_irq(irq)
-						: Motherboard_routes[irq];
-		}
-		/*
-		 * Finally, if we don't have residual data and the bus is
-		 * non-zero, use the callback (if provided)
-		 */
-		else {
-			if (Motherboard_non0 != NULL)
-				Motherboard_non0(dev);
-
-			continue;
-		}
-
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-
-	/* Setup the Winbond or Via PIB - prep_pib_init() is coded for
-	 * the non-openpic case, but it breaks (at least) the Utah
-	 * (Powerstack II Pro4000), so only call it if we have an
-	 * openpic.
-	 */
-	if (have_openpic)
-		prep_pib_init();
-}
-
-static void __init
-prep_pcibios_after_init(void)
-{
-#if 0
-	struct pci_dev *dev;
-
-	/* If there is a WD 90C, reset the IO BAR to 0x0 (it started that
-	 * way, but the PCI layer relocated it because it thought 0x0 was
-	 * invalid for a BAR).
-	 * If you don't do this, the card's VGA base will be <IO BAR>+0xc0000
-	 * instead of 0xc0000. vgacon.c (for example) is completely unaware of
-	 * this little quirk.
-	 */
-	dev = pci_get_device(PCI_VENDOR_ID_WD, PCI_DEVICE_ID_WD_90C, NULL);
-	if (dev) {
-		dev->resource[1].end -= dev->resource[1].start;
-		dev->resource[1].start = 0;
-		/* tell the hardware */
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0x0);
-		pci_dev_put(dev);
-	}
-#endif
-}
-
-static void __init
-prep_init_resource(struct resource *res, unsigned long start,
-		   unsigned long end, int flags)
-{
-	res->flags = flags;
-	res->start = start;
-	res->end = end;
-	res->name = "PCI host bridge";
-	res->parent = NULL;
-	res->sibling = NULL;
-	res->child = NULL;
-}
-
-void __init
-prep_find_bridges(void)
-{
-	struct pci_controller* hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = PREP_ISA_MEM_BASE;
-	hose->io_base_phys = PREP_ISA_IO_BASE;
-	hose->io_base_virt = ioremap(PREP_ISA_IO_BASE, 0x800000);
-	prep_init_resource(&hose->io_resource, 0, 0x007fffff, IORESOURCE_IO);
-	prep_init_resource(&hose->mem_resources[0], 0xc0000000, 0xfeffffff,
-			   IORESOURCE_MEM);
-	setup_indirect_pci(hose, PREP_ISA_IO_BASE + 0xcf8,
-			   PREP_ISA_IO_BASE + 0xcfc);
-
-	printk("PReP architecture\n");
-
-	if (have_residual_data) {
-		PPC_DEVICE *hostbridge;
-
-		hostbridge = residual_find_device(PROCESSORDEVICE, NULL,
-			BridgeController, PCIBridge, -1, 0);
-		if (hostbridge &&
-			((hostbridge->DeviceId.Interface == PCIBridgeIndirect) ||
-			 (hostbridge->DeviceId.Interface == PCIBridgeRS6K))) {
-			PnP_TAG_PACKET * pkt;
-			pkt = PnP_find_large_vendor_packet(
-				res->DevicePnPHeap+hostbridge->AllocatedOffset,
-				3, 0);
-			if(pkt) {
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-				setup_indirect_pci(hose,
-					ld_le32((unsigned *) (p.PPCData)),
-					ld_le32((unsigned *) (p.PPCData+8)));
-#undef p
-			} else
-				setup_indirect_pci(hose, 0x80000cf8, 0x80000cfc);
-		}
-	}
-
-	ppc_md.pcibios_fixup = prep_pcibios_fixup;
-	ppc_md.pcibios_after_init = prep_pcibios_after_init;
-}
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
deleted file mode 100644
index 465b658c927d..000000000000
--- a/arch/ppc/platforms/prep_setup.c
+++ /dev/null
@@ -1,1043 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *
- * Support for PReP (Motorola MTX/MVME)
- * by Troy Benjegerdes (hozer@drgw.net)
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/screen_info.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/ioport.h>
-#include <linux/console.h>
-#include <linux/timex.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/sections.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/cache.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/mc146818rtc.h>
-#include <asm/mk48t59.h>
-#include <asm/prep_nvram.h>
-#include <asm/raven.h>
-#include <asm/vga.h>
-#include <asm/time.h>
-#include <asm/mpc10x.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/todc.h>
-
-/* prep registers for L2 */
-#define CACHECRBA       0x80000823      /* Cache configuration register address */
-#define L2CACHE_MASK	0x03	/* Mask for 2 L2 Cache bits */
-#define L2CACHE_512KB	0x00	/* 512KB */
-#define L2CACHE_256KB	0x01	/* 256KB */
-#define L2CACHE_1MB	0x02	/* 1MB */
-#define L2CACHE_NONE	0x03	/* NONE */
-#define L2CACHE_PARITY  0x08    /* Mask for L2 Cache Parity Protected bit */
-
-TODC_ALLOC();
-
-extern unsigned char prep_nvram_read_val(int addr);
-extern void prep_nvram_write_val(int addr,
-				 unsigned char val);
-extern unsigned char rs_nvram_read_val(int addr);
-extern void rs_nvram_write_val(int addr,
-				 unsigned char val);
-extern void ibm_prep_init(void);
-
-extern void prep_find_bridges(void);
-
-int _prep_type;
-
-extern void prep_residual_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-
-
-#define cached_21	(((char *)(ppc_cached_irq_mask))[3])
-#define cached_A1	(((char *)(ppc_cached_irq_mask))[2])
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-extern int probingmem;
-extern unsigned long loops_per_jiffy;
-
-/* useful ISA ports */
-#define PREP_SYSCTL	0x81c
-/* present in the IBM reference design; possibly identical in Mot boxes: */
-#define PREP_IBM_SIMM_ID	0x803	/* SIMM size: 32 or 8 MiB */
-#define PREP_IBM_SIMM_PRESENCE	0x804
-#define PREP_IBM_EQUIPMENT	0x80c
-#define PREP_IBM_L2INFO	0x80d
-#define PREP_IBM_PM1	0x82a	/* power management register 1 */
-#define PREP_IBM_PLANAR	0x852	/* planar ID - identifies the motherboard */
-#define PREP_IBM_DISP	0x8c0	/* 4-digit LED display */
-
-/* Equipment Present Register masks: */
-#define PREP_IBM_EQUIPMENT_RESERVED	0x80
-#define PREP_IBM_EQUIPMENT_SCSIFUSE	0x40
-#define PREP_IBM_EQUIPMENT_L2_COPYBACK	0x08
-#define PREP_IBM_EQUIPMENT_L2_256	0x04
-#define PREP_IBM_EQUIPMENT_CPU	0x02
-#define PREP_IBM_EQUIPMENT_L2	0x01
-
-/* planar ID values: */
-/* Sandalfoot/Sandalbow (6015/7020) */
-#define PREP_IBM_SANDALFOOT	0xfc
-/* Woodfield, Thinkpad 850/860 (6042/7249) */
-#define PREP_IBM_THINKPAD	0xff /* planar ID unimplemented */
-/* PowerSeries 830/850 (6050/6070) */
-#define PREP_IBM_CAROLINA_IDE_0	0xf0
-#define PREP_IBM_CAROLINA_IDE_1	0xf1
-#define PREP_IBM_CAROLINA_IDE_2	0xf2
-#define PREP_IBM_CAROLINA_IDE_3	0xf3
-/* 7248-43P */
-#define PREP_IBM_CAROLINA_SCSI_0	0xf4
-#define PREP_IBM_CAROLINA_SCSI_1	0xf5
-#define PREP_IBM_CAROLINA_SCSI_2	0xf6
-#define PREP_IBM_CAROLINA_SCSI_3	0xf7 /* missing from Carolina Tech Spec */
-/* Tiger1 (7043-140) */
-#define PREP_IBM_TIGER1_133		0xd1
-#define PREP_IBM_TIGER1_166		0xd2
-#define PREP_IBM_TIGER1_180		0xd3
-#define PREP_IBM_TIGER1_xxx		0xd4 /* unknown, but probably exists */
-#define PREP_IBM_TIGER1_333		0xd5 /* missing from Tiger Tech Spec */
-
-/* setup_ibm_pci:
- * 	set Motherboard_map_name, Motherboard_map, Motherboard_routes.
- * 	return 8259 edge/level masks.
- */
-void (*setup_ibm_pci)(char *irq_lo, char *irq_hi);
-
-extern char *Motherboard_map_name; /* for use in *_cpuinfo */
-
-/*
- * As found in the PReP reference implementation.
- * Used by Thinkpad, Sandalfoot (6015/7020), and all Motorola PReP.
- */
-static void __init
-prep_gen_enable_l2(void)
-{
-	outb(inb(PREP_SYSCTL) | 0x3, PREP_SYSCTL);
-}
-
-/* Used by Carolina and Tiger1 */
-static void __init
-prep_carolina_enable_l2(void)
-{
-	outb(inb(PREP_SYSCTL) | 0xc0, PREP_SYSCTL);
-}
-
-/* cpuinfo code common to all IBM PReP */
-static void
-prep_ibm_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-
-	seq_printf(m, "machine\t\t: PReP %s\n", Motherboard_map_name);
-
-	seq_printf(m, "upgrade cpu\t: ");
-	if (equip_reg & PREP_IBM_EQUIPMENT_CPU) {
-		seq_printf(m, "not ");
-	}
-	seq_printf(m, "present\n");
-
-	/* print info about the SCSI fuse */
-	seq_printf(m, "scsi fuse\t: ");
-	if (equip_reg & PREP_IBM_EQUIPMENT_SCSIFUSE)
-		seq_printf(m, "ok");
-	else
-		seq_printf(m, "bad");
-	seq_printf(m, "\n");
-
-	/* print info about SIMMs */
-	if (have_residual_data) {
-		int i;
-		seq_printf(m, "simms\t\t: ");
-		for (i = 0; (res->ActualNumMemories) && (i < MAX_MEMS); i++) {
-			if (res->Memories[i].SIMMSize != 0)
-				seq_printf(m, "%d:%ldMiB ", i,
-					(res->Memories[i].SIMMSize > 1024) ?
-					res->Memories[i].SIMMSize>>20 :
-					res->Memories[i].SIMMSize);
-		}
-		seq_printf(m, "\n");
-	}
-}
-
-static int
-prep_gen_cpuinfo(struct seq_file *m)
-{
-	prep_ibm_cpuinfo(m);
-	return 0;
-}
-
-static int
-prep_sandalfoot_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "L2 cache\t: ");
-	if (equip_reg & PREP_IBM_EQUIPMENT_L2) {
-		seq_printf(m, "not present");
-	} else {
-		if (equip_reg & PREP_IBM_EQUIPMENT_L2_256)
-			seq_printf(m, "256KiB");
-		else
-			seq_printf(m, "unknown size");
-
-		if (equip_reg & PREP_IBM_EQUIPMENT_L2_COPYBACK)
-			seq_printf(m, ", copy-back");
-		else
-			seq_printf(m, ", write-through");
-	}
-	seq_printf(m, "\n");
-
-	return 0;
-}
-
-static int
-prep_thinkpad_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-	char *cpubus_speed, *pci_speed;
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	if ((equip_reg & 0x1) == 0) {
-		switch ((equip_reg & 0xc) >> 2) {
-			case 0x0:
-				seq_printf(m, "128KiB look-aside 2-way write-through\n");
-				break;
-			case 0x1:
-				seq_printf(m, "512KiB look-aside direct-mapped write-back\n");
-				break;
-			case 0x2:
-				seq_printf(m, "256KiB look-aside 2-way write-through\n");
-				break;
-			case 0x3:
-				seq_printf(m, "256KiB look-aside direct-mapped write-back\n");
-				break;
-		}
-	} else {
-		seq_printf(m, "not present\n");
-	}
-
-	/* report bus speeds because we can */
-	if ((equip_reg & 0x80) == 0) {
-		switch ((equip_reg & 0x30) >> 4) {
-			case 0x1:
-				cpubus_speed = "50";
-				pci_speed = "25";
-				break;
-			case 0x3:
-				cpubus_speed = "66";
-				pci_speed = "33";
-				break;
-			default:
-				cpubus_speed = "unknown";
-				pci_speed = "unknown";
-				break;
-		}
-	} else {
-		switch ((equip_reg & 0x30) >> 4) {
-			case 0x1:
-				cpubus_speed = "25";
-				pci_speed = "25";
-				break;
-			case 0x2:
-				cpubus_speed = "60";
-				pci_speed = "30";
-				break;
-			case 0x3:
-				cpubus_speed = "33";
-				pci_speed = "33";
-				break;
-			default:
-				cpubus_speed = "unknown";
-				pci_speed = "unknown";
-				break;
-		}
-	}
-	seq_printf(m, "60x bus\t\t: %sMHz\n", cpubus_speed);
-	seq_printf(m, "pci bus\t\t: %sMHz\n", pci_speed);
-
-	return 0;
-}
-
-static int
-prep_carolina_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	if ((equip_reg & 0x1) == 0) {
-		unsigned int l2_reg = inb(PREP_IBM_L2INFO);
-
-		/* L2 size */
-		if ((l2_reg & 0x60) == 0)
-			seq_printf(m, "256KiB");
-		else if ((l2_reg & 0x60) == 0x20)
-			seq_printf(m, "512KiB");
-		else
-			seq_printf(m, "unknown size");
-
-		/* L2 type */
-		if ((l2_reg & 0x3) == 0)
-			seq_printf(m, ", async");
-		else if ((l2_reg & 0x3) == 1)
-			seq_printf(m, ", sync");
-		else
-			seq_printf(m, ", unknown type");
-
-		seq_printf(m, "\n");
-	} else {
-		seq_printf(m, "not present\n");
-	}
-
-	return 0;
-}
-
-static int
-prep_tiger1_cpuinfo(struct seq_file *m)
-{
-	unsigned int l2_reg = inb(PREP_IBM_L2INFO);
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	if ((l2_reg & 0xf) == 0xf) {
-		seq_printf(m, "not present\n");
-	} else {
-		if (l2_reg & 0x8)
-			seq_printf(m, "async, ");
-		else
-			seq_printf(m, "sync burst, ");
-	
-		if (l2_reg & 0x4)
-			seq_printf(m, "parity, ");
-		else
-			seq_printf(m, "no parity, ");
-	
-		switch (l2_reg & 0x3) {
-			case 0x0:
-				seq_printf(m, "256KiB\n");
-				break;
-			case 0x1:
-				seq_printf(m, "512KiB\n");
-				break;
-			case 0x2:
-				seq_printf(m, "1MiB\n");
-				break;
-			default:
-				seq_printf(m, "unknown size\n");
-				break;
-		}
-	}
-
-	return 0;
-}
-
-
-/* Used by all Motorola PReP */
-static int
-prep_mot_cpuinfo(struct seq_file *m)
-{
-	unsigned int cachew = *((unsigned char *)CACHECRBA);
-
-	seq_printf(m, "machine\t\t: PReP %s\n", Motherboard_map_name);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	switch (cachew & L2CACHE_MASK) {
-		case L2CACHE_512KB:
-			seq_printf(m, "512KiB");
-			break;
-		case L2CACHE_256KB:
-			seq_printf(m, "256KiB");
-			break;
-		case L2CACHE_1MB:
-			seq_printf(m, "1MiB");
-			break;
-		case L2CACHE_NONE:
-			seq_printf(m, "none\n");
-			goto no_l2;
-			break;
-		default:
-			seq_printf(m, "%x\n", cachew);
-	}
-
-	seq_printf(m, ", parity %s",
-			(cachew & L2CACHE_PARITY)? "enabled" : "disabled");
-
-	seq_printf(m, " SRAM:");
-
-	switch ( ((cachew & 0xf0) >> 4) & ~(0x3) ) {
-		case 1: seq_printf(m, "synchronous, parity, flow-through\n");
-				break;
-		case 2: seq_printf(m, "asynchronous, no parity\n");
-				break;
-		case 3: seq_printf(m, "asynchronous, parity\n");
-				break;
-		default:seq_printf(m, "synchronous, pipelined, no parity\n");
-				break;
-	}
-
-no_l2:
-	/* print info about SIMMs */
-	if (have_residual_data) {
-		int i;
-		seq_printf(m, "simms\t\t: ");
-		for (i = 0; (res->ActualNumMemories) && (i < MAX_MEMS); i++) {
-			if (res->Memories[i].SIMMSize != 0)
-				seq_printf(m, "%d:%ldM ", i,
-					(res->Memories[i].SIMMSize > 1024) ?
-					res->Memories[i].SIMMSize>>20 :
-					res->Memories[i].SIMMSize);
-		}
-		seq_printf(m, "\n");
-	}
-
-	return 0;
-}
-
-static void
-prep_restart(char *cmd)
-{
-#define PREP_SP92	0x92	/* Special Port 92 */
-	local_irq_disable(); /* no interrupts */
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb( inb(PREP_SP92) & ~1L , PREP_SP92);
-	/* signal a reset to system control port A - soft reset */
-	outb( inb(PREP_SP92) | 1 , PREP_SP92);
-
-	while ( 1 ) ;
-	/* not reached */
-#undef PREP_SP92
-}
-
-static void
-prep_halt(void)
-{
-	local_irq_disable(); /* no interrupts */
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	while ( 1 ) ;
-	/* not reached */
-}
-
-/* Carrera is the power manager in the Thinkpads. Unfortunately not much is
- * known about it, so we can't power down.
- */
-static void
-prep_carrera_poweroff(void)
-{
-	prep_halt();
-}
-
-/*
- * On most IBM PReP's, power management is handled by a Signetics 87c750
- * behind the Utah component on the ISA bus. To access the 750 you must write
- * a series of nibbles to port 0x82a (decoded by the Utah). This is described
- * somewhat in the IBM Carolina Technical Specification.
- * -Hollis
- */
-static void
-utah_sig87c750_setbit(unsigned int bytenum, unsigned int bitnum, int value)
-{
-	/*
-	 * byte1: 0 0 0 1 0  d  a5 a4
-	 * byte2: 0 0 0 1 a3 a2 a1 a0
-	 *
-	 * d = the bit's value, enabled or disabled
-	 * (a5 a4 a3) = the byte number, minus 20
-	 * (a2 a1 a0) = the bit number
-	 *
-	 * example: set the 5th bit of byte 21 (21.5)
-	 *     a5 a4 a3 = 001 (byte 1)
-	 *     a2 a1 a0 = 101 (bit 5)
-	 *
-	 *     byte1 = 0001 0100 (0x14)
-	 *     byte2 = 0001 1101 (0x1d)
-	 */
-	unsigned char byte1=0x10, byte2=0x10;
-
-	/* the 750's '20.0' is accessed as '0.0' through Utah (which adds 20) */
-	bytenum -= 20;
-
-	byte1 |= (!!value) << 2;		/* set d */
-	byte1 |= (bytenum >> 1) & 0x3;	/* set a5, a4 */
-
-	byte2 |= (bytenum & 0x1) << 3;	/* set a3 */
-	byte2 |= bitnum & 0x7;			/* set a2, a1, a0 */
-
-	outb(byte1, PREP_IBM_PM1);	/* first nibble */
-	mb();
-	udelay(100);				/* important: let controller recover */
-
-	outb(byte2, PREP_IBM_PM1);	/* second nibble */
-	mb();
-	udelay(100);				/* important: let controller recover */
-}
-
-static void
-prep_sig750_poweroff(void)
-{
-	/* tweak the power manager found in most IBM PRePs (except Thinkpads) */
-
-	local_irq_disable();
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	utah_sig87c750_setbit(21, 5, 1); /* set bit 21.5, "PMEXEC_OFF" */
-
-	while (1) ;
-	/* not reached */
-}
-
-static int
-prep_show_percpuinfo(struct seq_file *m, int i)
-{
-	/* PREP's without residual data will give incorrect values here */
-	seq_printf(m, "clock\t\t: ");
-	if (have_residual_data)
-		seq_printf(m, "%ldMHz\n",
-			   (res->VitalProductData.ProcessorHz > 1024) ?
-			   res->VitalProductData.ProcessorHz / 1000000 :
-			   res->VitalProductData.ProcessorHz);
-	else
-		seq_printf(m, "???\n");
-
-	return 0;
-}
-
-/*
- * Fill out screen_info according to the residual data. This allows us to use
- * at least vesafb.
- */
-static void __init
-prep_init_vesa(void)
-{
-#if     (defined(CONFIG_FB_VGA16) || defined(CONFIG_FB_VGA16_MODULE) || \
-	 defined(CONFIG_FB_VESA))
-	PPC_DEVICE *vgadev = NULL;
-
-	if (have_residual_data)
-		vgadev = residual_find_device(~0, NULL, DisplayController,
-							SVGAController, -1, 0);
-
-	if (vgadev != NULL) {
-		PnP_TAG_PACKET *pkt;
-
-		pkt = PnP_find_large_vendor_packet(
-				(unsigned char *)&res->DevicePnPHeap[vgadev->AllocatedOffset],
-				0x04, 0); /* 0x04 = Display Tag */
-		if (pkt != NULL) {
-			unsigned char *ptr = (unsigned char *)pkt;
-
-			if (ptr[4]) {
-				/* graphics mode */
-				screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB;
-
-				screen_info.lfb_depth = ptr[4] * 8;
-
-				screen_info.lfb_width = swab16(*(short *)(ptr+6));
-				screen_info.lfb_height = swab16(*(short *)(ptr+8));
-				screen_info.lfb_linelength = swab16(*(short *)(ptr+10));
-
-				screen_info.lfb_base = swab32(*(long *)(ptr+12));
-				screen_info.lfb_size = swab32(*(long *)(ptr+20)) / 65536;
-			}
-		}
-	}
-#endif
-}
-
-/*
- * Set DBAT 2 to access 0x80000000 so early progress messages will work
- */
-static __inline__ void
-prep_set_bat(void)
-{
-	/* wait for all outstanding memory access to complete */
-	mb();
-
-	/* setup DBATs */
-	mtspr(SPRN_DBAT2U, 0x80001ffe);
-	mtspr(SPRN_DBAT2L, 0x8000002a);
-
-	/* wait for updates */
-	mb();
-}
-
-/*
- * IBM 3-digit status LED
- */
-static unsigned int ibm_statusled_base;
-
-static void
-ibm_statusled_progress(char *s, unsigned short hex);
-
-static int
-ibm_statusled_panic(struct notifier_block *dummy1, unsigned long dummy2,
-		    void * dummy3)
-{
-	ibm_statusled_progress(NULL, 0x505); /* SOS */
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block ibm_statusled_block = {
-	ibm_statusled_panic,
-	NULL,
-	INT_MAX /* try to do it first */
-};
-
-static void
-ibm_statusled_progress(char *s, unsigned short hex)
-{
-	static int notifier_installed;
-	/*
-	 * Progress uses 4 digits and we have only 3.  So, we map 0xffff to
-	 * 0xfff for display switch off.  Out of range values are mapped to
-	 * 0xeff, as I'm told 0xf00 and above are reserved for hardware codes.
-	 * Install the panic notifier when the display is first switched off.
-	 */
-	if (hex == 0xffff) {
-		hex = 0xfff;
-		if (!notifier_installed) {
-			++notifier_installed;
-			atomic_notifier_chain_register(&panic_notifier_list,
-						&ibm_statusled_block);
-		}
-	}
-	else
-		if (hex > 0xfff)
-			hex = 0xeff;
-
-	mb();
-	outw(hex, ibm_statusled_base);
-}
-
-static void __init
-ibm_statusled_init(void)
-{
-	/*
-	 * The IBM 3-digit LED display is specified in the residual data
-	 * as an operator panel device, type "System Status LED".  Find
-	 * that device and determine its address.  We validate all the
-	 * other parameters on the off-chance another, similar device
-	 * exists.
-	 */
-	if (have_residual_data) {
-		PPC_DEVICE *led;
-		PnP_TAG_PACKET *pkt;
-
-		led = residual_find_device(~0, NULL, SystemPeripheral,
-					   OperatorPanel, SystemStatusLED, 0);
-		if (!led)
-			return;
-
-		pkt = PnP_find_packet((unsigned char *)
-		       &res->DevicePnPHeap[led->AllocatedOffset], S8_Packet, 0);
-		if (!pkt)
-			return;
-
-		if (pkt->S8_Pack.IOInfo != ISAAddr16bit)
-			return;
-		if (*(unsigned short *)pkt->S8_Pack.RangeMin !=
-		    *(unsigned short *)pkt->S8_Pack.RangeMax)
-			return;
-		if (pkt->S8_Pack.IOAlign != 2)
-			return;
-		if (pkt->S8_Pack.IONum != 2)
-			return;
-
-		ibm_statusled_base = ld_le16((unsigned short *)
-					     (pkt->S8_Pack.RangeMin));
-		ppc_md.progress = ibm_statusled_progress;
-	}
-}
-
-static void __init
-prep_setup_arch(void)
-{
-	unsigned char reg;
-	int is_ide=0;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	/* Lookup PCI host bridges */
-	prep_find_bridges();
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	switch ( _prep_type )
-	{
-	case _PREP_IBM:
-		reg = inb(PREP_IBM_PLANAR);
-		printk(KERN_INFO "IBM planar ID: %02x", reg);
-		switch (reg) {
-			case PREP_IBM_SANDALFOOT:
-				prep_gen_enable_l2();
-				setup_ibm_pci = prep_sandalfoot_setup_pci;
-				ppc_md.power_off = prep_sig750_poweroff;
-				ppc_md.show_cpuinfo = prep_sandalfoot_cpuinfo;
-				break;
-			case PREP_IBM_THINKPAD:
-				prep_gen_enable_l2();
-				setup_ibm_pci = prep_thinkpad_setup_pci;
-				ppc_md.power_off = prep_carrera_poweroff;
-				ppc_md.show_cpuinfo = prep_thinkpad_cpuinfo;
-				break;
-			default:
-				if (have_residual_data) {
-					prep_gen_enable_l2();
-					setup_ibm_pci = prep_residual_setup_pci;
-					ppc_md.power_off = prep_halt;
-					ppc_md.show_cpuinfo = prep_gen_cpuinfo;
-					break;
-				}
-				else
-					printk(" - unknown! Assuming Carolina");
-					/* fall through */
-			case PREP_IBM_CAROLINA_IDE_0:
-			case PREP_IBM_CAROLINA_IDE_1:
-			case PREP_IBM_CAROLINA_IDE_2:
-			case PREP_IBM_CAROLINA_IDE_3:
-				is_ide = 1;
-			case PREP_IBM_CAROLINA_SCSI_0:
-			case PREP_IBM_CAROLINA_SCSI_1:
-			case PREP_IBM_CAROLINA_SCSI_2:
-			case PREP_IBM_CAROLINA_SCSI_3:
-				prep_carolina_enable_l2();
-				setup_ibm_pci = prep_carolina_setup_pci;
-				ppc_md.power_off = prep_sig750_poweroff;
-				ppc_md.show_cpuinfo = prep_carolina_cpuinfo;
-				break;
-			case PREP_IBM_TIGER1_133:
-			case PREP_IBM_TIGER1_166:
-			case PREP_IBM_TIGER1_180:
-			case PREP_IBM_TIGER1_xxx:
-			case PREP_IBM_TIGER1_333:
-				prep_carolina_enable_l2();
-				setup_ibm_pci = prep_tiger1_setup_pci;
-				ppc_md.power_off = prep_sig750_poweroff;
-				ppc_md.show_cpuinfo = prep_tiger1_cpuinfo;
-				break;
-		}
-		printk("\n");
-
-		/* default root device */
-		if (is_ide)
-			ROOT_DEV = MKDEV(IDE0_MAJOR, 3);
-		else
-			ROOT_DEV = MKDEV(SCSI_DISK0_MAJOR, 3);
-
-		break;
-	case _PREP_Motorola:
-		prep_gen_enable_l2();
-		ppc_md.power_off = prep_halt;
-		ppc_md.show_cpuinfo = prep_mot_cpuinfo;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-		if (initrd_start)
-			ROOT_DEV = Root_RAM0;
-		else
-#endif
-#ifdef CONFIG_ROOT_NFS
-			ROOT_DEV = Root_NFS;
-#else
-			ROOT_DEV = Root_SDA2;
-#endif
-		break;
-	}
-
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if ( cmd_line[0] == '\0' ) {
-		char *bootargs;
-		 bootargs = prep_nvram_get_var("bootargs");
-		 if (bootargs != NULL) {
-			 strcpy(cmd_line, bootargs);
-			 /* again.. */
-			 strcpy(boot_command_line, cmd_line);
-		}
-	}
-
-	prep_init_vesa();
-
-	switch (_prep_type) {
-	case _PREP_Motorola:
-		raven_init();
-		break;
-	case _PREP_IBM:
-		ibm_prep_init();
-		break;
-	}
-
-#ifdef CONFIG_VGA_CONSOLE
-	/* vgacon.c needs to know where we mapped IO memory in io_block_mapping() */
-	vgacon_remap_base = 0xf0000000;
-	conswitchp = &vga_con;
-#endif
-}
-
-/*
- * First, see if we can get this information from the residual data.
- * This is important on some IBM PReP systems.  If we cannot, we let the
- * TODC code handle doing this.
- */
-static void __init
-prep_calibrate_decr(void)
-{
-	if (have_residual_data) {
-		unsigned long freq, divisor = 4;
-
-		if ( res->VitalProductData.ProcessorBusHz ) {
-			freq = res->VitalProductData.ProcessorBusHz;
-			printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-					(freq/divisor)/1000000,
-					(freq/divisor)%1000000);
-			tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-			tb_ticks_per_jiffy = freq / HZ / divisor;
-		}
-	}
-	else
-		todc_calibrate_decr();
-}
-
-static void __init
-prep_init_IRQ(void)
-{
-	unsigned int pci_viddid, pci_did;
-
-	if (OpenPIC_Addr != NULL) {
-		openpic_init(NUM_8259_INTERRUPTS);
-		/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
-		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-				       i8259_irq);
-	}
-
-	if (have_residual_data) {
-		i8259_init(residual_isapic_addr(), 0);
-		return;
-	}
-
-	/* If we have a Raven PCI bridge or a Hawk PCI bridge / Memory
-	 * controller, we poll (as they have a different int-ack address). */
-	early_read_config_dword(NULL, 0, 0, PCI_VENDOR_ID, &pci_viddid);
-	pci_did = (pci_viddid & 0xffff0000) >> 16;
-	if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA)
-			&& ((pci_did == PCI_DEVICE_ID_MOTOROLA_RAVEN)
-				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_HAWK)))
-		i8259_init(0, 0);
-	else
-		/* PCI interrupt ack address given in section 6.1.8 of the
-		 * PReP specification. */
-		i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0);
-}
-
-#ifdef CONFIG_SMP
-/* PReP (MTX) support */
-static int __init
-smp_prep_probe(void)
-{
-	extern int mot_multi;
-
-	if (mot_multi) {
-		openpic_request_IPIs();
-		smp_hw_index[1] = 1;
-		return 2;
-	}
-
-	return 1;
-}
-
-static void __init
-smp_prep_kick_cpu(int nr)
-{
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
-	printk("CPU1 released, waiting\n");
-}
-
-static void __init
-smp_prep_setup_cpu(int cpu_nr)
-{
-	if (OpenPIC_Addr)
-		do_openpic_setup_cpu();
-}
-
-static struct smp_ops_t prep_smp_ops = {
-	smp_openpic_message_pass,
-	smp_prep_probe,
-	smp_prep_kick_cpu,
-	smp_prep_setup_cpu,
-	.give_timebase = smp_generic_give_timebase,
-	.take_timebase = smp_generic_take_timebase,
-};
-#endif /* CONFIG_SMP */
-
-/*
- * Setup the bat mappings we're going to load that cover
- * the io areas.  RAM was mapped by mapin_ram().
- * -- Cort
- */
-static void __init
-prep_map_io(void)
-{
-	io_block_mapping(0x80000000, PREP_ISA_IO_BASE, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xf0000000, PREP_ISA_MEM_BASE, 0x08000000, _PAGE_IO);
-}
-
-static int __init
-prep_request_io(void)
-{
-#ifdef CONFIG_NVRAM
-	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
-#endif
-	request_region(0x00,0x20,"dma1");
-	request_region(0x40,0x20,"timer");
-	request_region(0x80,0x10,"dma page reg");
-	request_region(0xc0,0x20,"dma2");
-
-	return 0;
-}
-
-device_initcall(prep_request_io);
-
-void __init
-prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_PREP_RESIDUAL
-	/* make a copy of residual data */
-	if ( r3 ) {
-		memcpy((void *)res,(void *)(r3+KERNELBASE),
-			 sizeof(RESIDUAL));
-	}
-#endif
-
-	isa_io_base = PREP_ISA_IO_BASE;
-	isa_mem_base = PREP_ISA_MEM_BASE;
-	pci_dram_offset = PREP_PCI_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	/* figure out what kind of prep workstation we are */
-	if (have_residual_data) {
-		if ( !strncmp(res->VitalProductData.PrintableModel,"IBM",3) )
-			_prep_type = _PREP_IBM;
-		else
-			_prep_type = _PREP_Motorola;
-	}
-	else {
-		/* assume motorola if no residual (netboot?) */
-		_prep_type = _PREP_Motorola;
-	}
-
-#ifdef CONFIG_PREP_RESIDUAL
-	/* Switch off all residual data processing if the user requests it */
-	if (strstr(cmd_line, "noresidual") != NULL)
-			res = NULL;
-#endif
-
-	/* Initialise progress early to get maximum benefit */
-	prep_set_bat();
-	ibm_statusled_init();
-
-	ppc_md.setup_arch     = prep_setup_arch;
-	ppc_md.show_percpuinfo = prep_show_percpuinfo;
-	ppc_md.show_cpuinfo   = NULL; /* set in prep_setup_arch() */
-	ppc_md.init_IRQ       = prep_init_IRQ;
-	/* this gets changed later on if we have an OpenPIC -- Cort */
-	ppc_md.get_irq        = i8259_irq;
-
-	ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
-	ppc_md.restart        = prep_restart;
-	ppc_md.power_off      = NULL; /* set in prep_setup_arch() */
-	ppc_md.halt           = prep_halt;
-
-	ppc_md.nvram_read_val = prep_nvram_read_val;
-	ppc_md.nvram_write_val = prep_nvram_write_val;
-
-	ppc_md.time_init      = todc_time_init;
-	if (_prep_type == _PREP_IBM) {
-		ppc_md.rtc_read_val = todc_mc146818_read_val;
-		ppc_md.rtc_write_val = todc_mc146818_write_val;
-		TODC_INIT(TODC_TYPE_MC146818, RTC_PORT(0), NULL, RTC_PORT(1),
-				8);
-	} else {
-		TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
-				PREP_NVRAM_DATA, 8);
-	}
-
-	ppc_md.calibrate_decr = prep_calibrate_decr;
-	ppc_md.set_rtc_time   = todc_set_rtc_time;
-	ppc_md.get_rtc_time   = todc_get_rtc_time;
-
-	ppc_md.setup_io_mappings = prep_map_io;
-
-#ifdef CONFIG_SMP
-	smp_ops			 = &prep_smp_ops;
-#endif /* CONFIG_SMP */
-}
diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c
deleted file mode 100644
index 93bd593cf957..000000000000
--- a/arch/ppc/platforms/prpmc750.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Board setup routines for Motorola PrPMC750
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/slab.h>
-#include <linux/serial_reg.h>
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/uaccess.h>
-#include <asm/time.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/hawk.h>
-
-#include "prpmc750.h"
-
-extern unsigned long loops_per_jiffy;
-
-extern void gen550_progress(char *, unsigned short);
-
-static u_char prpmc750_openpic_initsenses[] __initdata =
-{
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT0 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UART */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_DEBUGINT */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HAWK_WDT */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_ABORT */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT1 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT2 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT3 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTA */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTB */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTC */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTD */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-};
-
-/*
- * Motorola PrPMC750/PrPMC800 in PrPMCBASE or PrPMC-Carrier
- * Combined irq tables.  Only Base has IDSEL 14, only Carrier has 21 and 22.
- */
-static inline int
-prpmc_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{12,	0,	0,	0},  /* IDSEL 14 - Ethernet, base */
-		{0,	0,	0,	0},  /* IDSEL 15 - unused */
-		{10,	11,	12,	9},  /* IDSEL 16 - PMC A1, PMC1 */
-		{10,	11,	12,	9},  /* IDSEL 17 - PrPMC-A-B, PMC2-B */
-		{11,	12,	9,	10}, /* IDSEL 18 - PMC A1-B, PMC1-B */
-		{0,	0,	0,	0},  /* IDSEL 19 - unused */
-		{9,	10,	11,	12}, /* IDSEL 20 - P2P Bridge */
-		{11,	12,	9,	10}, /* IDSEL 21 - PMC A2, carrier */
-		{12,	9,	10,	11}, /* IDSEL 22 - PMC A2-B, carrier */
-	};
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static void __init prpmc750_pcibios_fixup(void)
-{
-	struct pci_dev *dev;
-	unsigned short wtmp;
-
-	/*
-	 * Kludge to clean up after PPC6BUG which doesn't
-	 * configure the CL5446 VGA card.  Also the
-	 * resource subsystem doesn't fixup the
-	 * PCI mem resources on the CL5446.
-	 */
-	if ((dev = pci_get_device(PCI_VENDOR_ID_CIRRUS,
-				   PCI_DEVICE_ID_CIRRUS_5446, 0))) {
-		dev->resource[0].start += PRPMC750_PCI_PHY_MEM_OFFSET;
-		dev->resource[0].end += PRPMC750_PCI_PHY_MEM_OFFSET;
-		pci_read_config_word(dev, PCI_COMMAND, &wtmp);
-		pci_write_config_word(dev, PCI_COMMAND, wtmp | 3);
-		/* Enable Color mode in MISC reg */
-		outb(0x03, 0x3c2);
-		/* Select DRAM config reg */
-		outb(0x0f, 0x3c4);
-		/* Set proper DRAM config */
-		outb(0xdf, 0x3c5);
-		pci_dev_put(dev);
-	}
-}
-
-void __init prpmc750_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->io_base_virt = (void *)PRPMC750_ISA_IO_BASE;
-	hose->pci_mem_offset = PRPMC750_PCI_PHY_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			  PRPMC750_PCI_IO_START,
-			  PRPMC750_PCI_IO_END,
-			  IORESOURCE_IO, "PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			  PRPMC750_PROC_PCI_MEM_START,
-			  PRPMC750_PROC_PCI_MEM_END,
-			  IORESOURCE_MEM, "PCI host bridge");
-
-	hose->io_space.start = PRPMC750_PCI_IO_START;
-	hose->io_space.end = PRPMC750_PCI_IO_END;
-	hose->mem_space.start = PRPMC750_PCI_MEM_START;
-	hose->mem_space.end = PRPMC750_PCI_MEM_END - HAWK_MPIC_SIZE;
-
-	if (hawk_init(hose, PRPMC750_HAWK_PPC_REG_BASE,
-		      PRPMC750_PROC_PCI_MEM_START,
-		      PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
-		      PRPMC750_PROC_PCI_IO_START, PRPMC750_PROC_PCI_IO_END,
-		      PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
-	    != 0) {
-		printk(KERN_CRIT "Could not initialize host bridge\n");
-	}
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup = prpmc750_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = prpmc_map_irq;
-}
-static int prpmc750_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: PrPMC750\n");
-
-	return 0;
-}
-
-static void __init prpmc750_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* Lookup PCI host bridges */
-	prpmc750_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	OpenPIC_InitSenses = prpmc750_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(prpmc750_openpic_initsenses);
-
-	printk(KERN_INFO "Port by MontaVista Software, Inc. "
-			"(source@mvista.com)\n");
-}
-
-/*
- * Compute the PrPMC750's bus speed using the baud clock as a
- * reference.
- */
-static unsigned long __init prpmc750_get_bus_speed(void)
-{
-	unsigned long tbl_start, tbl_end;
-	unsigned long current_state, old_state, bus_speed;
-	unsigned char lcr, dll, dlm;
-	int baud_divisor, count;
-
-	/* Read the UART's baud clock divisor */
-	lcr = readb(PRPMC750_SERIAL_0_LCR);
-	writeb(lcr | UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	dll = readb(PRPMC750_SERIAL_0_DLL);
-	dlm = readb(PRPMC750_SERIAL_0_DLM);
-	writeb(lcr & ~UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	baud_divisor = (dlm << 8) | dll;
-
-	/*
-	 * Use the baud clock divisor and base baud clock
-	 * to determine the baud rate and use that as
-	 * the number of baud clock edges we use for
-	 * the time base sample.  Make it half the baud
-	 * rate.
-	 */
-	count = PRPMC750_BASE_BAUD / (baud_divisor * 16);
-
-	/* Find the first edge of the baud clock */
-	old_state = readb(PRPMC750_STATUS_REG) & PRPMC750_BAUDOUT_MASK;
-	do {
-		current_state = readb(PRPMC750_STATUS_REG) &
-		    PRPMC750_BAUDOUT_MASK;
-	} while (old_state == current_state);
-
-	old_state = current_state;
-
-	/* Get the starting time base value */
-	tbl_start = get_tbl();
-
-	/*
-	 * Loop until we have found a number of edges equal
-	 * to half the count (half the baud rate)
-	 */
-	do {
-		do {
-			current_state = readb(PRPMC750_STATUS_REG) &
-			    PRPMC750_BAUDOUT_MASK;
-		} while (old_state == current_state);
-		old_state = current_state;
-	} while (--count);
-
-	/* Get the ending time base value */
-	tbl_end = get_tbl();
-
-	/* Compute bus speed */
-	bus_speed = (tbl_end - tbl_start) * 128;
-
-	return bus_speed;
-}
-
-static void __init prpmc750_calibrate_decr(void)
-{
-	unsigned long freq;
-	int divisor = 4;
-
-	freq = prpmc750_get_bus_speed();
-
-	tb_ticks_per_jiffy = freq / (HZ * divisor);
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-}
-
-static void prpmc750_restart(char *cmd)
-{
-	local_irq_disable();
-	writeb(PRPMC750_MODRST_MASK, PRPMC750_MODRST_REG);
-	while (1) ;
-}
-
-static void prpmc750_halt(void)
-{
-	local_irq_disable();
-	while (1) ;
-}
-
-static void prpmc750_power_off(void)
-{
-	prpmc750_halt();
-}
-
-static void __init prpmc750_init_IRQ(void)
-{
-	openpic_init(0);
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void prpmc750_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-/*
- * We need to read the Falcon/Hawk memory controller
- * to properly determine this value
- */
-static unsigned long __init prpmc750_find_end_of_memory(void)
-{
-	/* Read the memory size from the Hawk SMC */
-	return hawk_get_mem_size(PRPMC750_HAWK_SMC_BASE);
-}
-
-static void __init prpmc750_map_io(void)
-{
-	io_block_mapping(PRPMC750_ISA_IO_BASE, PRPMC750_ISA_IO_BASE,
-			 0x10000000, _PAGE_IO);
-#if 0
-	io_block_mapping(0xf0000000, 0xc0000000, 0x08000000, _PAGE_IO);
-#endif
-	io_block_mapping(0xf8000000, 0xf8000000, 0x08000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Cover the Hawk registers with a BAT */
-	prpmc750_set_bat();
-
-	isa_io_base = PRPMC750_ISA_IO_BASE;
-	isa_mem_base = PRPMC750_ISA_MEM_BASE;
-	pci_dram_offset = PRPMC750_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = prpmc750_setup_arch;
-	ppc_md.show_cpuinfo = prpmc750_show_cpuinfo;
-	ppc_md.init_IRQ = prpmc750_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.find_end_of_memory = prpmc750_find_end_of_memory;
-	ppc_md.setup_io_mappings = prpmc750_map_io;
-
-	ppc_md.restart = prpmc750_restart;
-	ppc_md.power_off = prpmc750_power_off;
-	ppc_md.halt = prpmc750_halt;
-
-	/* PrPMC750 has no timekeeper part */
-	ppc_md.time_init = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.calibrate_decr = prpmc750_calibrate_decr;
-
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-}
diff --git a/arch/ppc/platforms/prpmc750.h b/arch/ppc/platforms/prpmc750.h
deleted file mode 100644
index c4dcff09d7ca..000000000000
--- a/arch/ppc/platforms/prpmc750.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * arch/ppc/platforms/prpmc750.h
- *
- * Definitions for Motorola PrPMC750 board support
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_PRPMC750_H__
-#define __ASM_PRPMC750_H__
-
-/*
- * Due to limitations imposed by legacy hardware (primarily IDE controllers),
- * the PrPMC750 carrier board operates using a PReP address map.
- *
- * From Processor (physical) -> PCI:
- *   PCI Mem Space: 0xc0000000 - 0xfe000000 -> 0x00000000 - 0x3e000000 (768 MB)
- *   PCI I/O Space: 0x80000000 - 0x90000000 -> 0x00000000 - 0x10000000 (256 MB)
- *	Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
- *
- * From PCI -> Processor (physical):
- *   System Memory: 0x80000000 -> 0x00000000
- */
-
-#define PRPMC750_ISA_IO_BASE		PREP_ISA_IO_BASE
-#define PRPMC750_ISA_MEM_BASE		PREP_ISA_MEM_BASE
-
-/* PCI Memory space mapping info */
-#define PRPMC750_PCI_MEM_SIZE		0x30000000U
-#define PRPMC750_PROC_PCI_MEM_START	PRPMC750_ISA_MEM_BASE
-#define PRPMC750_PROC_PCI_MEM_END	(PRPMC750_PROC_PCI_MEM_START +	\
-					 PRPMC750_PCI_MEM_SIZE - 1)
-#define PRPMC750_PCI_MEM_START		0x00000000U
-#define PRPMC750_PCI_MEM_END		(PRPMC750_PCI_MEM_START +	\
-					 PRPMC750_PCI_MEM_SIZE - 1)
-
-/* PCI I/O space mapping info */
-#define PRPMC750_PCI_IO_SIZE		0x10000000U
-#define PRPMC750_PROC_PCI_IO_START	PRPMC750_ISA_IO_BASE
-#define PRPMC750_PROC_PCI_IO_END	(PRPMC750_PROC_PCI_IO_START +	\
-					 PRPMC750_PCI_IO_SIZE - 1)
-#define PRPMC750_PCI_IO_START		0x00000000U
-#define PRPMC750_PCI_IO_END		(PRPMC750_PCI_IO_START + 	\
-					 PRPMC750_PCI_IO_SIZE - 1)
-
-/* System memory mapping info */
-#define PRPMC750_PCI_DRAM_OFFSET	PREP_PCI_DRAM_OFFSET
-#define PRPMC750_PCI_PHY_MEM_OFFSET	(PRPMC750_ISA_MEM_BASE-PRPMC750_PCI_MEM_START)
-
-/* Register address definitions */
-#define PRPMC750_HAWK_SMC_BASE		0xfef80000U
-#define PRPMC750_HAWK_PPC_REG_BASE	0xfeff0000U
-
-#define PRPMC750_BASE_BAUD		1843200
-#define PRPMC750_SERIAL_0		0xfef88000
-#define PRPMC750_SERIAL_0_DLL		(PRPMC750_SERIAL_0 + (UART_DLL << 4))
-#define PRPMC750_SERIAL_0_DLM		(PRPMC750_SERIAL_0 + (UART_DLM << 4))
-#define PRPMC750_SERIAL_0_LCR		(PRPMC750_SERIAL_0 + (UART_LCR << 4))
-
-#define PRPMC750_STATUS_REG		0xfef88080
-#define PRPMC750_BAUDOUT_MASK		0x02
-#define PRPMC750_MONARCH_MASK		0x01
-
-#define PRPMC750_MODRST_REG		0xfef880a0
-#define PRPMC750_MODRST_MASK		0x01
-
-#define PRPMC750_PIRQ_REG		0xfef880b0
-#define PRPMC750_SEL1_MASK		0x02
-#define PRPMC750_SEL0_MASK		0x01
-
-#define PRPMC750_TBEN_REG		0xfef880c0
-#define PRPMC750_TBEN_MASK		0x01
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  4
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD  (PRPMC750_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-#define SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PRPMC750_SERIAL_0, 1, STD_COM_FLAGS, \
-		iomem_base: (unsigned char *)PRPMC750_SERIAL_0, \
-		iomem_reg_shift: 4, \
-		io_type: SERIAL_IO_MEM } /* ttyS0 */
-
-#endif				/* __ASM_PRPMC750_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c
deleted file mode 100644
index 5bcda7f92cd0..000000000000
--- a/arch/ppc/platforms/prpmc800.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/harrier_defs.h>
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/harrier.h>
-
-#include "prpmc800.h"
-
-#define HARRIER_REVI_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_REVI_OFF)
-#define HARRIER_UCTL_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_UCTL_OFF)
-#define HARRIER_MISC_CSR_REG   (PRPMC800_HARRIER_XCSR_BASE+HARRIER_MISC_CSR_OFF)
-#define HARRIER_IFEVP_REG    (PRPMC800_HARRIER_MPIC_BASE+HARRIER_MPIC_IFEVP_OFF)
-#define HARRIER_IFEDE_REG    (PRPMC800_HARRIER_MPIC_BASE+HARRIER_MPIC_IFEDE_OFF)
-#define HARRIER_FEEN_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_FEEN_OFF)
-#define HARRIER_FEMA_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_FEMA_OFF)
-
-#define HARRIER_VENI_REG	(PRPMC800_HARRIER_XCSR_BASE + HARRIER_VENI_OFF)
-#define HARRIER_MISC_CSR	(PRPMC800_HARRIER_XCSR_BASE + \
-				 HARRIER_MISC_CSR_OFF)
-
-#define MONARCH	(monarch != 0)
-#define NON_MONARCH (monarch == 0)
-
-extern int mpic_init(void);
-extern unsigned long loops_per_jiffy;
-extern void gen550_progress(char *, unsigned short);
-
-static int monarch = 0;
-static int found_self = 0;
-static int self = 0;
-
-static u_char prpmc800_openpic_initsenses[] __initdata =
-{
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT0 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_DEBUGINT */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HARRIER_WDT */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT1 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT2 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT3 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTA */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTB */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTC */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTD */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HARRIER_INT (UARTS, ABORT, DMA) */
-};
-
-/*
- * Motorola PrPMC750/PrPMC800 in PrPMCBASE or PrPMC-Carrier
- * Combined irq tables.  Only Base has IDSEL 14, only Carrier has 21 and 22.
- */
-static inline int
-prpmc_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{12,	0,	0,	0},  /* IDSEL 14 - Ethernet, base */
-		{0,	0,	0,	0},  /* IDSEL 15 - unused */
-		{10,	11,	12,	9},  /* IDSEL 16 - PMC A1, PMC1 */
-		{10,	11,	12,	9},  /* IDSEL 17 - PrPMC-A-B, PMC2-B */
-		{11,	12,	9,	10}, /* IDSEL 18 - PMC A1-B, PMC1-B */
-		{0,	0,	0,	0},  /* IDSEL 19 - unused */
-		{9,	10,	11,	12}, /* IDSEL 20 - P2P Bridge */
-		{11,	12,	9,	10}, /* IDSEL 21 - PMC A2, carrier */
-		{12,	9,	10,	11}, /* IDSEL 22 - PMC A2-B, carrier */
-	};
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static int
-prpmc_read_config_dword(struct pci_controller *hose, u8 bus, u8 devfn,
-			int offset, u32 * val)
-{
-	/* paranoia */
-	if ((hose == NULL) ||
-	    (hose->cfg_addr == NULL) || (hose->cfg_data == NULL))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr, ((offset & 0xfc) << 24) | (devfn << 16)
-		 | ((bus - hose->bus_offset) << 8) | 0x80);
-	*val = in_le32((u32 *) (hose->cfg_data + (offset & 3)));
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-#define HARRIER_PCI_VEND_DEV_ID	(PCI_VENDOR_ID_MOTOROLA | \
-				 (PCI_DEVICE_ID_MOTOROLA_HARRIER << 16))
-static int prpmc_self(u8 bus, u8 devfn)
-{
-	/*
-	 * Harriers always view themselves as being on bus 0. If we're not
-	 * looking at bus 0, we're not going to find ourselves.
-	 */
-	if (bus != 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else {
-		int result;
-		int val;
-		struct pci_controller *hose;
-
-		hose = pci_bus_to_hose(bus);
-
-		/* See if target device is a Harrier */
-		result = prpmc_read_config_dword(hose, bus, devfn,
-						 PCI_VENDOR_ID, &val);
-		if ((result != PCIBIOS_SUCCESSFUL) ||
-		    (val != HARRIER_PCI_VEND_DEV_ID))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		/*
-		 * LBA bit is set if target Harrier == initiating Harrier
-		 * (i.e. if we are reading our own PCI header).
-		 */
-		result = prpmc_read_config_dword(hose, bus, devfn,
-						 HARRIER_LBA_OFF, &val);
-		if ((result != PCIBIOS_SUCCESSFUL) ||
-		    ((val & HARRIER_LBA_MSK) != HARRIER_LBA_MSK))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		/* It's us, save our location for later */
-		self = devfn;
-		found_self = 1;
-		return PCIBIOS_SUCCESSFUL;
-	}
-}
-
-static int prpmc_exclude_device(u8 bus, u8 devfn)
-{
-	/*
-	 * Monarch is allowed to access all PCI devices. Non-monarch is
-	 * only allowed to access its own Harrier.
-	 */
-
-	if (MONARCH)
-		return PCIBIOS_SUCCESSFUL;
-	if (found_self)
-		if ((bus == 0) && (devfn == self))
-			return PCIBIOS_SUCCESSFUL;
-		else
-			return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return prpmc_self(bus, devfn);
-}
-
-void __init prpmc800_find_bridges(void)
-{
-	struct pci_controller *hose;
-	int host_bridge;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	ppc_md.pci_exclude_device = prpmc_exclude_device;
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pcibios_fixup_bus = NULL;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = prpmc_map_irq;
-
-	setup_indirect_pci(hose,
-			   PRPMC800_PCI_CONFIG_ADDR, PRPMC800_PCI_CONFIG_DATA);
-
-	/* Get host bridge vendor/dev id */
-
-	host_bridge = in_be32((uint *) (HARRIER_VENI_REG));
-
-	if (host_bridge != HARRIER_VEND_DEV_ID) {
-		printk(KERN_CRIT "Host bridge 0x%x not supported\n",
-				host_bridge);
-		return;
-	}
-
-	monarch = in_be32((uint *) HARRIER_MISC_CSR) & HARRIER_SYSCON;
-
-	printk(KERN_INFO "Running as %s.\n",
-			MONARCH ? "Monarch" : "Non-Monarch");
-
-	hose->io_space.start = PRPMC800_PCI_IO_START;
-	hose->io_space.end = PRPMC800_PCI_IO_END;
-	hose->io_base_virt = (void *)PRPMC800_ISA_IO_BASE;
-	hose->pci_mem_offset = PRPMC800_PCI_PHY_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			  PRPMC800_PCI_IO_START, PRPMC800_PCI_IO_END,
-			  IORESOURCE_IO, "PCI host bridge");
-
-	if (MONARCH) {
-		hose->mem_space.start = PRPMC800_PCI_MEM_START;
-		hose->mem_space.end = PRPMC800_PCI_MEM_END;
-
-		pci_init_resource(&hose->mem_resources[0],
-				  PRPMC800_PCI_MEM_START,
-				  PRPMC800_PCI_MEM_END,
-				  IORESOURCE_MEM, "PCI host bridge");
-
-		if (harrier_init(hose,
-				 PRPMC800_HARRIER_XCSR_BASE,
-				 PRPMC800_PROC_PCI_MEM_START,
-				 PRPMC800_PROC_PCI_MEM_END,
-				 PRPMC800_PROC_PCI_IO_START,
-				 PRPMC800_PROC_PCI_IO_END,
-				 PRPMC800_HARRIER_MPIC_BASE) != 0)
-			printk(KERN_CRIT "Could not initialize HARRIER "
-					 "bridge\n");
-
-		harrier_release_eready(PRPMC800_HARRIER_XCSR_BASE);
-		harrier_wait_eready(PRPMC800_HARRIER_XCSR_BASE);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	} else {
-		pci_init_resource(&hose->mem_resources[0],
-				  PRPMC800_NM_PCI_MEM_START,
-				  PRPMC800_NM_PCI_MEM_END,
-				  IORESOURCE_MEM, "PCI host bridge");
-
-		hose->mem_space.start = PRPMC800_NM_PCI_MEM_START;
-		hose->mem_space.end = PRPMC800_NM_PCI_MEM_END;
-
-		if (harrier_init(hose,
-				 PRPMC800_HARRIER_XCSR_BASE,
-				 PRPMC800_NM_PROC_PCI_MEM_START,
-				 PRPMC800_NM_PROC_PCI_MEM_END,
-				 PRPMC800_PROC_PCI_IO_START,
-				 PRPMC800_PROC_PCI_IO_END,
-				 PRPMC800_HARRIER_MPIC_BASE) != 0)
-			printk(KERN_CRIT "Could not initialize HARRIER "
-					 "bridge\n");
-
-		harrier_setup_nonmonarch(PRPMC800_HARRIER_XCSR_BASE,
-					 HARRIER_ITSZ_1MB);
-		harrier_release_eready(PRPMC800_HARRIER_XCSR_BASE);
-	}
-}
-
-static int prpmc800_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: PrPMC800\n");
-
-	return 0;
-}
-
-static void __init prpmc800_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* Lookup PCI host bridges */
-	prpmc800_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk(KERN_INFO "Port by MontaVista Software, Inc. "
-			 "(source@mvista.com)\n");
-}
-
-/*
- * Compute the PrPMC800's tbl frequency using the baud clock as a reference.
- */
-static void __init prpmc800_calibrate_decr(void)
-{
-	unsigned long tbl_start, tbl_end;
-	unsigned long current_state, old_state, tb_ticks_per_second;
-	unsigned int count;
-	unsigned int harrier_revision;
-
-	harrier_revision = readb(HARRIER_REVI_REG);
-	if (harrier_revision < 2) {
-		/* XTAL64 was broken in harrier revision 1 */
-		printk(KERN_INFO "time_init: Harrier revision %d, assuming "
-				 "100 Mhz bus\n", harrier_revision);
-		tb_ticks_per_second = 100000000 / 4;
-		tb_ticks_per_jiffy = tb_ticks_per_second / HZ;
-		tb_to_us = mulhwu_scale_factor(tb_ticks_per_second, 1000000);
-		return;
-	}
-
-	/*
-	 * The XTAL64 bit oscillates at the 1/64 the base baud clock
-	 * Set count to XTAL64 cycles per second.  Since we'll count
-	 * half-cycles, we'll reach the count in half a second.
-	 */
-	count = PRPMC800_BASE_BAUD / 64;
-
-	/* Find the first edge of the baud clock */
-	old_state = readb(HARRIER_UCTL_REG) & HARRIER_XTAL64_MASK;
-	do {
-		current_state = readb(HARRIER_UCTL_REG) & HARRIER_XTAL64_MASK;
-	} while (old_state == current_state);
-
-	old_state = current_state;
-
-	/* Get the starting time base value */
-	tbl_start = get_tbl();
-
-	/*
-	 * Loop until we have found a number of edges (half-cycles)
-	 * equal to the count (half a second)
-	 */
-	do {
-		do {
-			current_state = readb(HARRIER_UCTL_REG) &
-			    HARRIER_XTAL64_MASK;
-		} while (old_state == current_state);
-		old_state = current_state;
-	} while (--count);
-
-	/* Get the ending time base value */
-	tbl_end = get_tbl();
-
-	/* We only counted for half a second, so double to get ticks/second */
-	tb_ticks_per_second = (tbl_end - tbl_start) * 2;
-	tb_ticks_per_jiffy = tb_ticks_per_second / HZ;
-	tb_to_us = mulhwu_scale_factor(tb_ticks_per_second, 1000000);
-}
-
-static void prpmc800_restart(char *cmd)
-{
-	ulong temp;
-
-	local_irq_disable();
-	temp = in_be32((uint *) HARRIER_MISC_CSR_REG);
-	temp |= HARRIER_RSTOUT;
-	out_be32((uint *) HARRIER_MISC_CSR_REG, temp);
-	while (1) ;
-}
-
-static void prpmc800_halt(void)
-{
-	local_irq_disable();
-	while (1) ;
-}
-
-static void prpmc800_power_off(void)
-{
-	prpmc800_halt();
-}
-
-static void __init prpmc800_init_IRQ(void)
-{
-	OpenPIC_InitSenses = prpmc800_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(prpmc800_openpic_initsenses);
-
-	/* Setup external interrupt sources. */
-	openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-	/* Setup internal UART interrupt source. */
-	openpic_set_sources(16, 1, OpenPIC_Addr + 0x10200);
-
-	/* Do the MPIC initialization based on the above settings. */
-	openpic_init(0);
-
-	/* enable functional exceptions for uarts and abort */
-	out_8((u8 *) HARRIER_FEEN_REG, (HARRIER_FE_UA0 | HARRIER_FE_UA1));
-	out_8((u8 *) HARRIER_FEMA_REG, ~(HARRIER_FE_UA0 | HARRIER_FE_UA1));
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void prpmc800_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-/*
- * We need to read the Harrier memory controller
- * to properly determine this value
- */
-static unsigned long __init prpmc800_find_end_of_memory(void)
-{
-	/* Read the memory size from the Harrier XCSR */
-	return harrier_get_mem_size(PRPMC800_HARRIER_XCSR_BASE);
-}
-
-static void __init prpmc800_map_io(void)
-{
-	io_block_mapping(0x80000000, 0x80000000, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	prpmc800_set_bat();
-
-	isa_io_base = PRPMC800_ISA_IO_BASE;
-	isa_mem_base = PRPMC800_ISA_MEM_BASE;
-	pci_dram_offset = PRPMC800_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = prpmc800_setup_arch;
-	ppc_md.show_cpuinfo = prpmc800_show_cpuinfo;
-	ppc_md.init_IRQ = prpmc800_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.find_end_of_memory = prpmc800_find_end_of_memory;
-	ppc_md.setup_io_mappings = prpmc800_map_io;
-
-	ppc_md.restart = prpmc800_restart;
-	ppc_md.power_off = prpmc800_power_off;
-	ppc_md.halt = prpmc800_halt;
-
-	/* PrPMC800 has no timekeeper part */
-	ppc_md.time_init = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.calibrate_decr = prpmc800_calibrate_decr;
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#else				/* !CONFIG_SERIAL_TEXT_DEBUG */
-	ppc_md.progress = NULL;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-}
diff --git a/arch/ppc/platforms/prpmc800.h b/arch/ppc/platforms/prpmc800.h
deleted file mode 100644
index 26f604e05cfa..000000000000
--- a/arch/ppc/platforms/prpmc800.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/ppc/platforms/prpmc800.h
- *
- * Definitions for Motorola PrPMC800 board support
- *
- * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
- /*
-  * From Processor to PCI:
-  *   PCI Mem Space: 0x80000000 - 0xa0000000 -> 0x80000000 - 0xa0000000 (512 MB)
-  *   PCI I/O Space: 0xfe400000 - 0xfeef0000 -> 0x00000000 - 0x00b00000 (11 MB)
-  *      Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
-  *
-  * From PCI to Processor:
-  *   System Memory: 0x00000000 -> 0x00000000
-  */
-
-#ifndef __ASMPPC_PRPMC800_H
-#define __ASMPPC_PRPMC800_H
-
-#define PRPMC800_PCI_CONFIG_ADDR		0xfe000cf8
-#define PRPMC800_PCI_CONFIG_DATA		0xfe000cfc
-
-#define PRPMC800_PROC_PCI_IO_START		0xfe400000U
-#define PRPMC800_PROC_PCI_IO_END		0xfeefffffU
-#define PRPMC800_PCI_IO_START			0x00000000U
-#define PRPMC800_PCI_IO_END			0x00afffffU
-
-#define PRPMC800_PROC_PCI_MEM_START		0x80000000U
-#define PRPMC800_PROC_PCI_MEM_END		0x9fffffffU
-#define PRPMC800_PCI_MEM_START			0x80000000U
-#define PRPMC800_PCI_MEM_END			0x9fffffffU
-
-#define PRPMC800_NM_PROC_PCI_MEM_START		0x40000000U
-#define PRPMC800_NM_PROC_PCI_MEM_END		0xdfffffffU
-#define PRPMC800_NM_PCI_MEM_START		0x40000000U
-#define PRPMC800_NM_PCI_MEM_END			0xdfffffffU
-
-#define PRPMC800_PCI_DRAM_OFFSET		0x00000000U
-#define PRPMC800_PCI_PHY_MEM_OFFSET		0x00000000U
-
-#define PRPMC800_ISA_IO_BASE			PRPMC800_PROC_PCI_IO_START
-#define PRPMC800_ISA_MEM_BASE			0x00000000U
-
-#define PRPMC800_HARRIER_XCSR_BASE		HARRIER_DEFAULT_XCSR_BASE
-#define PRPMC800_HARRIER_MPIC_BASE		0xff000000
-
-#define PRPMC800_SERIAL_1			0xfeff00c0
-
-#define PRPMC800_BASE_BAUD			1843200
-
-/*
- * interrupt vector number and priority for harrier internal interrupt
- * sources
- */
-#define PRPMC800_INT_IRQ			16
-#define PRPMC800_INT_PRI			15
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  4
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD (PRPMC800_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-/* UARTS are at IRQ 16 */
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PRPMC800_SERIAL_1, 16, STD_COM_FLAGS, /* ttyS0 */\
-		iomem_base: (unsigned char *)PRPMC800_SERIAL_1,		\
-		iomem_reg_shift: 0,					\
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif				/* __ASMPPC_PRPMC800_H */
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
deleted file mode 100644
index f1dee1e87809..000000000000
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ /dev/null
@@ -1,1492 +0,0 @@
-/*
- * Board setup routines for the Radstone PPC7D boards.
- *
- * Author: James Chapman <jchapman@katalix.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/* Radstone PPC7D boards are rugged VME boards with PPC 7447A CPUs,
- * Discovery-II, dual gigabit ethernet, dual PMC, USB, keyboard/mouse,
- * 4 serial ports, 2 high speed serial ports (MPSCs) and optional
- * SCSI / VGA.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>		/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mv643xx.h>
-#include <linux/netdevice.h>
-#include <linux/platform_device.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/vga.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/pci-bridge.h>
-#include <asm/mv64x60.h>
-
-#include "radstone_ppc7d.h"
-
-#undef DEBUG
-
-#define PPC7D_RST_PIN			17 	/* GPP17 */
-
-extern u32 mv64360_irq_base;
-extern spinlock_t rtc_lock;
-
-static struct mv64x60_handle bh;
-static int ppc7d_has_alma;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-
-/* FIXME - move to h file */
-extern int ds1337_do_command(int id, int cmd, void *arg);
-#define DS1337_GET_DATE         0
-#define DS1337_SET_DATE         1
-
-/* residual data */
-unsigned char __res[sizeof(bd_t)];
-
-/*****************************************************************************
- * Serial port code
- *****************************************************************************/
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-static void __init ppc7d_early_serial_map(void)
-{
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#elif defined(CONFIG_SERIAL_8250)
-	struct uart_port serial_req;
-
-	/* Setup serial port access */
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.uartclk = UART_CLK;
-	serial_req.irq = 4;
-	serial_req.flags = STD_COM_FLAGS;
-	serial_req.iotype = UPIO_MEM;
-	serial_req.membase = (u_char *) PPC7D_SERIAL_0;
-
-	gen550_init(0, &serial_req);
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 0 failed\n");
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	serial_req.line = 1;
-	serial_req.irq = 3;
-	serial_req.membase = (u_char *) PPC7D_SERIAL_1;
-
-	gen550_init(1, &serial_req);
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 1 failed\n");
-#else
-#error CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG has no supported CONFIG_SERIAL_XXX
-#endif
-}
-#endif /* CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG */
-
-/*****************************************************************************
- * Low-level board support code
- *****************************************************************************/
-
-static unsigned long __init ppc7d_find_end_of_memory(void)
-{
-	bd_t *bp = (bd_t *) __res;
-
-	if (bp->bi_memsize)
-		return bp->bi_memsize;
-
-	return (256 * 1024 * 1024);
-}
-
-static void __init ppc7d_map_io(void)
-{
-	/* remove temporary mapping */
-	mtspr(SPRN_DBAT3U, 0x00000000);
-	mtspr(SPRN_DBAT3L, 0x00000000);
-
-	io_block_mapping(0xe8000000, 0xe8000000, 0x08000000, _PAGE_IO);
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-}
-
-static void ppc7d_restart(char *cmd)
-{
-	u32 data;
-
-	/* Disable GPP17 interrupt */
-	data = mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	data &= ~(1 << PPC7D_RST_PIN);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, data);
-
-	/* Configure MPP17 as GPP */
-	data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2);
-	data &= ~(0x0000000f << 4);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data);
-
-	/* Enable pin GPP17 for output */
-	data = mv64x60_read(&bh, MV64x60_GPP_IO_CNTL);
-	data |= (1 << PPC7D_RST_PIN);
-	mv64x60_write(&bh, MV64x60_GPP_IO_CNTL, data);
-
-	/* Toggle GPP9 pin to reset the board */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, 1 << PPC7D_RST_PIN);
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_SET, 1 << PPC7D_RST_PIN);
-
-	for (;;) ;		/* Spin until reset happens */
-	/* NOTREACHED */
-}
-
-static void ppc7d_power_off(void)
-{
-	u32 data;
-
-	local_irq_disable();
-
-	/* Ensure that internal MV643XX watchdog is disabled.
-	 * The Disco watchdog uses MPP17 on this hardware.
-	 */
-	data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2);
-	data &= ~(0x0000000f << 4);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data);
-
-	data = mv64x60_read(&bh, MV64x60_WDT_WDC);
-	if (data & 0x80000000) {
-		mv64x60_write(&bh, MV64x60_WDT_WDC, 1 << 24);
-		mv64x60_write(&bh, MV64x60_WDT_WDC, 2 << 24);
-	}
-
-	for (;;) ;		/* No way to shut power off with software */
-	/* NOTREACHED */
-}
-
-static void ppc7d_halt(void)
-{
-	ppc7d_power_off();
-	/* NOTREACHED */
-}
-
-static unsigned long ppc7d_led_no_pulse;
-
-static int __init ppc7d_led_pulse_disable(char *str)
-{
-	ppc7d_led_no_pulse = 1;
-	return 1;
-}
-
-/* This kernel option disables the heartbeat pulsing of a board LED */
-__setup("ledoff", ppc7d_led_pulse_disable);
-
-static void ppc7d_heartbeat(void)
-{
-	u32 data32;
-	u8 data8;
-	static int max706_wdog = 0;
-
-	/* Unfortunately we can't access the LED control registers
-	 * during early init because they're on the CPLD which is the
-	 * other side of a PCI bridge which goes unreachable during
-	 * PCI scan. So write the LEDs only if the MV64360 watchdog is
-	 * enabled (i.e. userspace apps are running so kernel is up)..
-	 */
-	data32 = mv64x60_read(&bh, MV64x60_WDT_WDC);
-	if (data32 & 0x80000000) {
-		/* Enable MAX706 watchdog if not done already */
-		if (!max706_wdog) {
-			outb(3, PPC7D_CPLD_RESET);
-			max706_wdog = 1;
-		}
-
-		/* Hit the MAX706 watchdog */
-		outb(0, PPC7D_CPLD_WATCHDOG_TRIG);
-
-		/* Pulse LED DS219 if not disabled */
-		if (!ppc7d_led_no_pulse) {
-			static int led_on = 0;
-
-			data8 = inb(PPC7D_CPLD_LEDS);
-			if (led_on)
-				data8 &= ~PPC7D_CPLD_LEDS_DS219_MASK;
-			else
-				data8 |= PPC7D_CPLD_LEDS_DS219_MASK;
-
-			outb(data8, PPC7D_CPLD_LEDS);
-			led_on = !led_on;
-		}
-	}
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-}
-
-static int ppc7d_show_cpuinfo(struct seq_file *m)
-{
-	u8 val;
-	u8 val1, val2;
-	static int flash_sizes[4] = { 64, 32, 0, 16 };
-	static int flash_banks[4] = { 4, 3, 2, 1 };
-	static int sdram_bank_sizes[4] = { 128, 256, 512, 1 };
-	int sdram_num_banks = 2;
-	static char *pci_modes[] = { "PCI33", "PCI66",
-		"Unknown", "Unknown",
-		"PCIX33", "PCIX66",
-		"PCIX100", "PCIX133"
-	};
-
-	seq_printf(m, "vendor\t\t: Radstone Technology\n");
-	seq_printf(m, "machine\t\t: PPC7D\n");
-
-	val = inb(PPC7D_CPLD_BOARD_REVISION);
-	val1 = (val & PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK) >> 5;
-	val2 = (val & PPC7D_CPLD_BOARD_REVISION_LETTER_MASK);
-	seq_printf(m, "revision\t: %hd%c%c\n",
-		   val1,
-		   (val2 <= 0x18) ? 'A' + val2 : 'Y',
-		   (val2 > 0x18) ? 'A' + (val2 - 0x19) : ' ');
-
-	val = inb(PPC7D_CPLD_MOTHERBOARD_TYPE);
-	val1 = val & PPC7D_CPLD_MB_TYPE_PLL_MASK;
-	val2 = val & (PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK |
-		      PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK);
-	seq_printf(m, "bus speed\t: %dMHz\n",
-		   (val1 == PPC7D_CPLD_MB_TYPE_PLL_133) ? 133 :
-		   (val1 == PPC7D_CPLD_MB_TYPE_PLL_100) ? 100 :
-		   (val1 == PPC7D_CPLD_MB_TYPE_PLL_64) ? 64 : 0);
-
-	val = inb(PPC7D_CPLD_MEM_CONFIG);
-	if (val & PPC7D_CPLD_SDRAM_BANK_NUM_MASK) sdram_num_banks--;
-
-	val = inb(PPC7D_CPLD_MEM_CONFIG_EXTEND);
-	val1 = (val & PPC7D_CPLD_SDRAM_BANK_SIZE_MASK) >> 6;
-	seq_printf(m, "SDRAM\t\t: %d banks of %d%c, total %d%c",
-		   sdram_num_banks,
-		   sdram_bank_sizes[val1],
-		   (sdram_bank_sizes[val1] < 128) ? 'G' : 'M',
-		   sdram_num_banks * sdram_bank_sizes[val1],
-		   (sdram_bank_sizes[val1] < 128) ? 'G' : 'M');
-	if (val2 & PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK) {
-		seq_printf(m, " [ECC %sabled]",
-			   (val2 & PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK) ? "en" :
-			   "dis");
-	}
-	seq_printf(m, "\n");
-
-	val1 = (val & PPC7D_CPLD_FLASH_DEV_SIZE_MASK);
-	val2 = (val & PPC7D_CPLD_FLASH_BANK_NUM_MASK) >> 2;
-	seq_printf(m, "FLASH\t\t: %d banks of %dM, total %dM\n",
-		   flash_banks[val2], flash_sizes[val1],
-		   flash_banks[val2] * flash_sizes[val1]);
-
-	val = inb(PPC7D_CPLD_FLASH_WRITE_CNTL);
-	val1 = inb(PPC7D_CPLD_SW_FLASH_WRITE_PROTECT);
-	seq_printf(m, "  write links\t: %s%s%s%s\n",
-		   (val & PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK) ? "WRITE " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK) ? "BOOT " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK) ? "USER " : "",
-		   (val & (PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK |
-			   PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK |
-			   PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK)) ==
-		   0 ? "NONE" : "");
-	seq_printf(m, "  write sector h/w enables: %s%s%s%s%s\n",
-		   (val & PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK) ? "RECOVERY " :
-		   "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK) ? "BOOT " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_USER_WR_MASK) ? "USER " : "",
-		   (val1 & PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK) ? "NVRAM " :
-		   "",
-		   (((val &
-		      (PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK |
-		       PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK |
-		       PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK)) == 0)
-		    && ((val1 & PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK) ==
-			0)) ? "NONE" : "");
-	val1 =
-	    inb(PPC7D_CPLD_SW_FLASH_WRITE_PROTECT) &
-	    (PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK |
-	     PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK);
-	seq_printf(m, "  software sector enables: %s%s%s\n",
-		   (val1 & PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK) ? "SYSBOOT "
-		   : "",
-		   (val1 & PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK) ? "USER " : "",
-		   (val1 == 0) ? "NONE " : "");
-
-	seq_printf(m, "Boot options\t: %s%s%s%s\n",
-		   (val & PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK) ?
-		   "ALTERNATE " : "",
-		   (val & PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK) ? "VME " :
-		   "",
-		   (val & PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK) ? "RECOVERY "
-		   : "",
-		   ((val &
-		     (PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK |
-		      PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK |
-		      PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK)) ==
-		    0) ? "NONE" : "");
-
-	val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_1);
-	seq_printf(m, "Fitted modules\t: %s%s%s%s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK) ? "" : "PMC1 ",
-		   (val & PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK) ? "" : "PMC2 ",
-		   (val & PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK) ? "AFIX " : "",
-		   ((val & (PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK |
-			    PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK |
-			    PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK)) ==
-		    (PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK |
-		     PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK)) ? "NONE" : "");
-
-	if (val & PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK) {
-		static const char *ids[] = {
-			"unknown",
-			"1553 (Dual Channel)",
-			"1553 (Single Channel)",
-			"8-bit SCSI + VGA",
-			"16-bit SCSI + VGA",
-			"1553 (Single Channel with sideband)",
-			"1553 (Dual Channel with sideband)",
-			NULL
-		};
-		u8 id = __raw_readb((void *)PPC7D_AFIX_REG_BASE + 0x03);
-		seq_printf(m, "AFIX module\t: 0x%hx [%s]\n", id,
-			   id < 7 ? ids[id] : "unknown");
-	}
-
-	val = inb(PPC7D_CPLD_PCI_CONFIG);
-	val1 = (val & PPC7D_CPLD_PCI_CONFIG_PCI0_MASK) >> 4;
-	val2 = (val & PPC7D_CPLD_PCI_CONFIG_PCI1_MASK);
-	seq_printf(m, "PCI#0\t\t: %s\nPCI#1\t\t: %s\n",
-		   pci_modes[val1], pci_modes[val2]);
-
-	val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_2);
-	seq_printf(m, "PMC1\t\t: %s\nPMC2\t\t: %s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_3_PMC1_V_MASK) ? "3.3v" : "5v",
-		   (val & PPC7D_CPLD_EQPT_PRES_3_PMC2_V_MASK) ? "3.3v" : "5v");
-	seq_printf(m, "PMC power source: %s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_MASK) ? "VME" :
-		   "internal");
-
-	val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_4);
-	val2 = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_2);
-	seq_printf(m, "Fit options\t: %s%s%s%s%s%s%s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_4_LPT_MASK) ? "LPT " : "",
-		   (val & PPC7D_CPLD_EQPT_PRES_4_PS2_FITTED) ? "PS2 " : "",
-		   (val & PPC7D_CPLD_EQPT_PRES_4_USB2_FITTED) ? "USB2 " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_UNIVERSE_MASK) ? "VME " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_COM36_MASK) ? "COM3-6 " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_GIGE_MASK) ? "eth0 " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_DUALGIGE_MASK) ? "eth1 " :
-		   "");
-
-	val = inb(PPC7D_CPLD_ID_LINK);
-	val1 = val & (PPC7D_CPLD_ID_LINK_E6_MASK |
-		      PPC7D_CPLD_ID_LINK_E7_MASK |
-		      PPC7D_CPLD_ID_LINK_E12_MASK |
-		      PPC7D_CPLD_ID_LINK_E13_MASK);
-
-	val = inb(PPC7D_CPLD_FLASH_WRITE_CNTL) &
-	    (PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK |
-	     PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK |
-	     PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK);
-
-	seq_printf(m, "Board links present: %s%s%s%s%s%s%s%s\n",
-		   (val1 & PPC7D_CPLD_ID_LINK_E6_MASK) ? "E6 " : "",
-		   (val1 & PPC7D_CPLD_ID_LINK_E7_MASK) ? "E7 " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK) ? "E9 " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK) ? "E10 " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK) ? "E11 " : "",
-		   (val1 & PPC7D_CPLD_ID_LINK_E12_MASK) ? "E12 " : "",
-		   (val1 & PPC7D_CPLD_ID_LINK_E13_MASK) ? "E13 " : "",
-		   ((val == 0) && (val1 == 0)) ? "NONE" : "");
-
-	val = inb(PPC7D_CPLD_WDOG_RESETSW_MASK);
-	seq_printf(m, "Front panel reset switch: %sabled\n",
-		   (val & PPC7D_CPLD_WDOG_RESETSW_MASK) ? "dis" : "en");
-
-	return 0;
-}
-
-static void __init ppc7d_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = 100000000 / 4;
-
-	pr_debug("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-		 freq / 1000000, freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-/*****************************************************************************
- * Interrupt stuff
- *****************************************************************************/
-
-static irqreturn_t ppc7d_i8259_intr(int irq, void *dev_id)
-{
-	u32 temp = mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-	if (temp & (1 << 28)) {
-		i8259_irq();
-		mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, temp & (~(1 << 28)));
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
-
-/*
- * Each interrupt cause is assigned an IRQ number.
- * Southbridge has 16*2 (two 8259's) interrupts.
- * Discovery-II has 96 interrupts (cause-hi, cause-lo, gpp x 32).
- * If multiple interrupts are pending, get_irq() returns the
- * lowest pending irq number first.
- *
- *
- * IRQ #   Source                              Trig   Active
- * =============================================================
- *
- * Southbridge
- * -----------
- * IRQ #   Source                              Trig
- * =============================================================
- * 0       ISA High Resolution Counter         Edge
- * 1       Keyboard                            Edge
- * 2       Cascade From (IRQ 8-15)             Edge
- * 3       Com 2 (Uart 2)                      Edge
- * 4       Com 1 (Uart 1)                      Edge
- * 5       PCI Int D/AFIX IRQZ ID4 (2,7)       Level
- * 6       GPIO                                Level
- * 7       LPT                                 Edge
- * 8       RTC Alarm                           Edge
- * 9       PCI Int A/PMC 2/AFIX IRQW ID1 (2,0) Level
- * 10      PCI Int B/PMC 1/AFIX IRQX ID2 (2,1) Level
- * 11      USB2                                Level
- * 12      Mouse                               Edge
- * 13      Reserved internally by Ali M1535+
- * 14      PCI Int C/VME/AFIX IRQY ID3 (2,6)   Level
- * 15      COM 5/6                             Level
- *
- * 16..112 Discovery-II...
- *
- * MPP28   Southbridge                         Edge   High
- *
- *
- * Interrupts are cascaded through to the Discovery-II.
- *
- *  PCI ---
- *         \
- * CPLD --> ALI1535 -------> DISCOVERY-II
- *        INTF           MPP28
- */
-static void __init ppc7d_init_irq(void)
-{
-	int irq;
-
-	pr_debug("%s\n", __func__);
-	i8259_init(0, 0);
-	mv64360_init_irq();
-
-	/* IRQs 5,6,9,10,11,14,15 are level sensitive */
-	irq_desc[5].status |= IRQ_LEVEL;
-	irq_desc[6].status |= IRQ_LEVEL;
-	irq_desc[9].status |= IRQ_LEVEL;
-	irq_desc[10].status |= IRQ_LEVEL;
-	irq_desc[11].status |= IRQ_LEVEL;
-	irq_desc[14].status |= IRQ_LEVEL;
-	irq_desc[15].status |= IRQ_LEVEL;
-
-	/* GPP28 is edge triggered */
-	irq_desc[mv64360_irq_base + MV64x60_IRQ_GPP28].status &= ~IRQ_LEVEL;
-}
-
-static u32 ppc7d_irq_canonicalize(u32 irq)
-{
-	if ((irq >= 16) && (irq < (16 + 96)))
-		irq -= 16;
-
-	return irq;
-}
-
-static int ppc7d_get_irq(void)
-{
-	int irq;
-
-	irq = mv64360_get_irq();
-	if (irq == (mv64360_irq_base + MV64x60_IRQ_GPP28))
-		irq = i8259_irq();
-	return irq;
-}
-
-/*
- * 9       PCI Int A/PMC 2/AFIX IRQW ID1 (2,0) Level
- * 10      PCI Int B/PMC 1/AFIX IRQX ID2 (2,1) Level
- * 14      PCI Int C/VME/AFIX IRQY ID3 (2,6)   Level
- * 5       PCI Int D/AFIX IRQZ ID4 (2,7)       Level
- */
-static int __init ppc7d_map_irq(struct pci_dev *dev, unsigned char idsel,
-				unsigned char pin)
-{
-	static const char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{10, 14, 5, 9},	/* IDSEL 10 - PMC2 / AFIX IRQW */
-		{9, 10, 14, 5},	/* IDSEL 11 - PMC1 / AFIX IRQX */
-		{5, 9, 10, 14},	/* IDSEL 12 - AFIX IRQY */
-		{14, 5, 9, 10},	/* IDSEL 13 - AFIX IRQZ */
-	};
-	const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4;
-
-	pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__,
-		 dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin);
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-void __init ppc7d_intr_setup(void)
-{
-	u32 data;
-
-	/*
-	 * Define GPP 28 interrupt polarity as active high
-	 * input signal and level triggered
-	 */
-	data = mv64x60_read(&bh, MV64x60_GPP_LEVEL_CNTL);
-	data &= ~(1 << 28);
-	mv64x60_write(&bh, MV64x60_GPP_LEVEL_CNTL, data);
-	data = mv64x60_read(&bh, MV64x60_GPP_IO_CNTL);
-	data &= ~(1 << 28);
-	mv64x60_write(&bh, MV64x60_GPP_IO_CNTL, data);
-
-	/* Config GPP intr ctlr to respond to level trigger */
-	data = mv64x60_read(&bh, MV64x60_COMM_ARBITER_CNTL);
-	data |= (1 << 10);
-	mv64x60_write(&bh, MV64x60_COMM_ARBITER_CNTL, data);
-
-	/* XXXX Erranum FEr PCI-#8 */
-	data = mv64x60_read(&bh, MV64x60_PCI0_CMD);
-	data &= ~((1 << 5) | (1 << 9));
-	mv64x60_write(&bh, MV64x60_PCI0_CMD, data);
-	data = mv64x60_read(&bh, MV64x60_PCI1_CMD);
-	data &= ~((1 << 5) | (1 << 9));
-	mv64x60_write(&bh, MV64x60_PCI1_CMD, data);
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~(1 << 28));
-	data = mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	data |= (1 << 28);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, data);
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT27 summarizes GPP interrupts 23-31
-	 */
-	mv64x60_write(&bh, MV64360_IC_MAIN_CAUSE_HI, ~(1 << 27));
-	data = mv64x60_read(&bh, MV64360_IC_CPU0_INTR_MASK_HI);
-	data |= (1 << 27);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI, data);
-}
-
-/*****************************************************************************
- * Platform device data fixup routines.
- *****************************************************************************/
-
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init ppc7d_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = PPC7D_DEFAULT_BAUD;
-	pdata->brg_clk_src = PPC7D_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = PPC7D_MPSC_CLK_FREQ;
-
-	return;
-}
-#endif
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init ppc7d_fixup_eth_pdata(struct platform_device *pdev)
-{
-	struct mv643xx_eth_platform_data *eth_pd;
-	static u16 phy_addr[] = {
-		PPC7D_ETH0_PHY_ADDR,
-		PPC7D_ETH1_PHY_ADDR,
-		PPC7D_ETH2_PHY_ADDR,
-	};
-	int i;
-
-	eth_pd = pdev->dev.platform_data;
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = phy_addr[pdev->id];
-	eth_pd->tx_queue_size = PPC7D_ETH_TX_QUEUE_SIZE;
-	eth_pd->rx_queue_size = PPC7D_ETH_RX_QUEUE_SIZE;
-
-	/* Adjust IRQ by mv64360_irq_base */
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-
-		if (r->flags & IORESOURCE_IRQ) {
-			r->start += mv64360_irq_base;
-			r->end += mv64360_irq_base;
-			pr_debug("%s, uses IRQ %d\n", pdev->name,
-				 (int)r->start);
-		}
-	}
-
-}
-#endif
-
-#if defined(CONFIG_I2C_MV64XXX)
-static void __init
-ppc7d_fixup_i2c_pdata(struct platform_device *pdev)
-{
-	struct mv64xxx_i2c_pdata *pdata;
-	int i;
-
-	pdata = pdev->dev.platform_data;
-	if (pdata == NULL) {
-		pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-		if (pdata == NULL)
-			return;
-
-		pdev->dev.platform_data = pdata;
-	}
-
-	/* divisors M=8, N=3 for 100kHz I2C from 133MHz system clock */
-	pdata->freq_m = 8;
-	pdata->freq_n = 3;
-	pdata->timeout = 500;
-	pdata->retries = 3;
-
-	/* Adjust IRQ by mv64360_irq_base */
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-
-		if (r->flags & IORESOURCE_IRQ) {
-			r->start += mv64360_irq_base;
-			r->end += mv64360_irq_base;
-			pr_debug("%s, uses IRQ %d\n", pdev->name, (int) r->start);
-		}
-	}
-}
-#endif
-
-static int ppc7d_platform_notify(struct device *dev)
-{
-	static struct {
-		char *bus_id;
-		void ((*rtn) (struct platform_device * pdev));
-	} dev_map[] = {
-#if defined(CONFIG_SERIAL_MPSC)
-		{ MPSC_CTLR_NAME ".0", ppc7d_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", ppc7d_fixup_mpsc_pdata },
-#endif
-#if defined(CONFIG_MV643XX_ETH)
-		{ MV643XX_ETH_NAME ".0", ppc7d_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".1", ppc7d_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".2", ppc7d_fixup_eth_pdata },
-#endif
-#if defined(CONFIG_I2C_MV64XXX)
-		{ MV64XXX_I2C_CTLR_NAME ".0", ppc7d_fixup_i2c_pdata },
-#endif
-	};
-	struct platform_device *pdev;
-	int i;
-
-	if (dev && dev->bus_id)
-		for (i = 0; i < ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				     BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-						    struct platform_device,
-						    dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-/*****************************************************************************
- * PCI device fixups.
- * These aren't really fixups per se. They are used to init devices as they
- * are found during PCI scan.
- *
- * The PPC7D has an HB8 PCI-X bridge which must be set up during a PCI
- * scan in order to find other devices on its secondary side.
- *****************************************************************************/
-
-static void __init ppc7d_fixup_hb8(struct pci_dev *dev)
-{
-	u16 val16;
-
-	if (dev->bus->number == 0) {
-		pr_debug("PCI: HB8 init\n");
-
-		pci_write_config_byte(dev, 0x1c,
-				      ((PPC7D_PCI0_IO_START_PCI_ADDR & 0xf000)
-				       >> 8) | 0x01);
-		pci_write_config_byte(dev, 0x1d,
-				      (((PPC7D_PCI0_IO_START_PCI_ADDR +
-					 PPC7D_PCI0_IO_SIZE -
-					 1) & 0xf000) >> 8) | 0x01);
-		pci_write_config_word(dev, 0x30,
-				      PPC7D_PCI0_IO_START_PCI_ADDR >> 16);
-		pci_write_config_word(dev, 0x32,
-				      ((PPC7D_PCI0_IO_START_PCI_ADDR +
-					PPC7D_PCI0_IO_SIZE -
-					1) >> 16) & 0xffff);
-
-		pci_write_config_word(dev, 0x20,
-				      PPC7D_PCI0_MEM0_START_PCI_LO_ADDR >> 16);
-		pci_write_config_word(dev, 0x22,
-				      ((PPC7D_PCI0_MEM0_START_PCI_LO_ADDR +
-					PPC7D_PCI0_MEM0_SIZE -
-					1) >> 16) & 0xffff);
-		pci_write_config_word(dev, 0x24, 0);
-		pci_write_config_word(dev, 0x26, 0);
-		pci_write_config_dword(dev, 0x28, 0);
-		pci_write_config_dword(dev, 0x2c, 0);
-
-		pci_read_config_word(dev, 0x3e, &val16);
-		val16 |= ((1 << 5) | (1 << 1));	/* signal master aborts and
-						 * SERR to primary
-						 */
-		val16 &= ~(1 << 2);		/* ISA disable, so all ISA
-						 * ports forwarded to secondary
-						 */
-		pci_write_config_word(dev, 0x3e, val16);
-	}
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0028, ppc7d_fixup_hb8);
-
-/* This should perhaps be a separate driver as we're actually initializing
- * the chip for this board here. It's hardly a fixup...
- */
-static void __init ppc7d_fixup_ali1535(struct pci_dev *dev)
-{
-	pr_debug("PCI: ALI1535 init\n");
-
-	if (dev->bus->number == 1) {
-		/* Configure the ISA Port Settings */
-		pci_write_config_byte(dev, 0x43, 0x00);
-
-		/* Disable PCI Interrupt polling mode */
-		pci_write_config_byte(dev, 0x45, 0x00);
-
-		/* Multifunction pin select INTFJ -> INTF */
-		pci_write_config_byte(dev, 0x78, 0x00);
-
-		/* Set PCI INT -> IRQ Routing control in for external
-		 * pins south bridge.
-		 */
-		pci_write_config_byte(dev, 0x48, 0x31);	/* [7-4] INT B -> IRQ10
-							 * [3-0] INT A -> IRQ9
-							 */
-		pci_write_config_byte(dev, 0x49, 0x5D);	/* [7-4] INT D -> IRQ5
-							 * [3-0] INT C -> IRQ14
-							 */
-
-		/* PPC7D setup */
-		/* NEC USB device on IRQ 11 (INTE) - INTF disabled */
-		pci_write_config_byte(dev, 0x4A, 0x09);
-
-		/* GPIO on IRQ 6 */
-		pci_write_config_byte(dev, 0x76, 0x07);
-
-		/* SIRQ I (COMS 5/6) use IRQ line 15.
-		 * Positive (not subtractive) address decode.
-		 */
-		pci_write_config_byte(dev, 0x44, 0x0f);
-
-		/* SIRQ II disabled */
-		pci_write_config_byte(dev, 0x75, 0x0);
-
-		/* On board USB and RTC disabled */
-		pci_write_config_word(dev, 0x52, (1 << 14));
-		pci_write_config_byte(dev, 0x74, 0x00);
-
-		/* On board IDE disabled */
-		pci_write_config_byte(dev, 0x58, 0x00);
-
-		/* Decode 32-bit addresses */
-		pci_write_config_byte(dev, 0x5b, 0);
-
-		/* Disable docking IO */
-		pci_write_config_word(dev, 0x5c, 0x0000);
-
-		/* Disable modem, enable sound */
-		pci_write_config_byte(dev, 0x77, (1 << 6));
-
-		/* Disable hot-docking mode */
-		pci_write_config_byte(dev, 0x7d, 0x00);
-	}
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1533, ppc7d_fixup_ali1535);
-
-static int ppc7d_pci_exclude_device(u8 bus, u8 devfn)
-{
-	/* Early versions of this board were fitted with IBM ALMA
-	 * PCI-VME bridge chips. The PCI config space of these devices
-	 * was not set up correctly and causes PCI scan problems.
-	 */
-	if ((bus == 1) && (PCI_SLOT(devfn) == 4) && ppc7d_has_alma)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return mv64x60_pci_exclude_device(bus, devfn);
-}
-
-/* This hook is called when each PCI bus is probed.
- */
-static void ppc7d_pci_fixup_bus(struct pci_bus *bus)
-{
-	pr_debug("PCI BUS %hu: %lx/%lx %lx/%lx %lx/%lx %lx/%lx\n",
-		 bus->number,
-		 bus->resource[0] ? bus->resource[0]->start : 0,
-		 bus->resource[0] ? bus->resource[0]->end : 0,
-		 bus->resource[1] ? bus->resource[1]->start : 0,
-		 bus->resource[1] ? bus->resource[1]->end : 0,
-		 bus->resource[2] ? bus->resource[2]->start : 0,
-		 bus->resource[2] ? bus->resource[2]->end : 0,
-		 bus->resource[3] ? bus->resource[3]->start : 0,
-		 bus->resource[3] ? bus->resource[3]->end : 0);
-
-	if ((bus->number == 1) && (bus->resource[2] != NULL)) {
-		/* Hide PCI window 2 of Bus 1 which is used only to
-		 * map legacy ISA memory space.
-		 */
-		bus->resource[2]->start = 0;
-		bus->resource[2]->end = 0;
-		bus->resource[2]->flags = 0;
-	}
-}
-
-/*****************************************************************************
- * Board device setup code
- *****************************************************************************/
-
-void __init ppc7d_setup_peripherals(void)
-{
-	u32 val32;
-
-	/* Set up windows for boot CS */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-				 PPC7D_BOOT_WINDOW_BASE, PPC7D_BOOT_WINDOW_SIZE,
-				 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* Boot firmware configures the following DevCS addresses.
-	 * DevCS0 - board control/status
-	 * DevCS1 - test registers
-	 * DevCS2 - AFIX port/address registers (for identifying)
-	 * DevCS3 - FLASH
-	 *
-	 * We don't use DevCS0, DevCS1.
-	 */
-	val32 = mv64x60_read(&bh, MV64360_CPU_BAR_ENABLE);
-	val32 |= ((1 << 4) | (1 << 5));
-	mv64x60_write(&bh, MV64360_CPU_BAR_ENABLE, val32);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_0_BASE, 0);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_0_SIZE, 0);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_1_BASE, 0);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_1_SIZE, 0);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-				 PPC7D_AFIX_REG_BASE, PPC7D_AFIX_REG_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-				 PPC7D_FLASH_BASE, PPC7D_FLASH_SIZE_ACTUAL, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 PPC7D_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE,
-				 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	/* Set up Enet->SRAM window */
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
-				 PPC7D_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE,
-				 0x2);
-	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-
-	/* Give enet r/w access to memory region */
-	val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_0);
-	val32 |= (0x3 << (4 << 1));
-	mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_0, val32);
-	val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_1);
-	val32 |= (0x3 << (4 << 1));
-	mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_1, val32);
-	val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_2);
-	val32 |= (0x3 << (4 << 1));
-	mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_2, val32);
-
-	val32 = mv64x60_read(&bh, MV64x60_TIMR_CNTR_0_3_CNTL);
-	val32 &= ~((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24));
-	mv64x60_write(&bh, MV64x60_TIMR_CNTR_0_3_CNTL, val32);
-
-	/* Enumerate pci bus.
-	 *
-	 * We scan PCI#0 first (the bus with the HB8 and other
-	 * on-board peripherals). We must configure the 64360 before
-	 * each scan, according to the bus number assignments.  Busses
-	 * are assigned incrementally, starting at 0.  PCI#0 is
-	 * usually assigned bus#0, the secondary side of the HB8 gets
-	 * bus#1 and PCI#1 (second PMC site) gets bus#2.  However, if
-	 * any PMC card has a PCI bridge, these bus assignments will
-	 * change.
-	 */
-
-	/* Turn off PCI retries */
-	val32 = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-	val32 |= (1 << 17);
-	mv64x60_write(&bh, MV64x60_CPU_CONFIG, val32);
-
-	/* Scan PCI#0 */
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-	printk(KERN_INFO "PCI#0: first=%d last=%d\n",
-	       bh.hose_a->first_busno, bh.hose_a->last_busno);
-
-	/* Scan PCI#1 */
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-	printk(KERN_INFO "PCI#1: first=%d last=%d\n",
-	       bh.hose_b->first_busno, bh.hose_b->last_busno);
-
-	/* Turn on PCI retries */
-	val32 = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-	val32 &= ~(1 << 17);
-	mv64x60_write(&bh, MV64x60_CPU_CONFIG, val32);
-
-	/* Setup interrupts */
-	ppc7d_intr_setup();
-}
-
-static void __init ppc7d_setup_bridge(void)
-{
-	struct mv64x60_setup_info si;
-	int i;
-	u32 temp;
-
-	mv64360_irq_base = 16;	/* first 16 intrs are 2 x 8259's */
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = PPC7D_PCI0_IO_START_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = PPC7D_PCI0_IO_START_PCI_ADDR;
-	si.pci_0.pci_io.size = PPC7D_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = PPC7D_PCI0_MEM0_START_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = PPC7D_PCI0_MEM0_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = PPC7D_PCI0_MEM0_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = PPC7D_PCI0_MEM0_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[1].cpu_base = PPC7D_PCI0_MEM1_START_PROC_ADDR;
-	si.pci_0.pci_mem[1].pci_base_hi = PPC7D_PCI0_MEM1_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[1].pci_base_lo = PPC7D_PCI0_MEM1_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[1].size = PPC7D_PCI0_MEM1_SIZE;
-	si.pci_0.pci_mem[1].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = PPC7D_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = PPC7D_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = PPC7D_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = PPC7D_PCI1_MEM0_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = PPC7D_PCI1_MEM0_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = PPC7D_PCI1_MEM0_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = PPC7D_PCI1_MEM0_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[1].cpu_base = PPC7D_PCI1_MEM1_START_PROC_ADDR;
-	si.pci_1.pci_mem[1].pci_base_hi = PPC7D_PCI1_MEM1_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[1].pci_base_lo = PPC7D_PCI1_MEM1_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[1].size = PPC7D_PCI1_MEM1_SIZE;
-	si.pci_1.pci_mem[1].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	/* Don't clear the SRAM window since we use it for debug */
-	si.window_preserve_mask_32_lo = (1 << MV64x60_CPU2SRAM_WIN);
-
-	printk(KERN_INFO "PCI: MV64360 PCI#0 IO at %x, size %x\n",
-	       si.pci_0.pci_io.cpu_base, si.pci_0.pci_io.size);
-	printk(KERN_INFO "PCI: MV64360 PCI#1 IO at %x, size %x\n",
-	       si.pci_1.pci_io.cpu_base, si.pci_1.pci_io.size);
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		/* All PPC7D hardware uses B0 or newer MV64360 silicon which
-		 * does not have snoop bugs.
-		 */
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-	/* Lookup PCI host bridges */
-	if (mv64x60_init(&bh, &si))
-		printk(KERN_ERR "MV64360 initialization failed.\n");
-
-	pr_debug("MV64360 regs @ %lx/%p\n", bh.p_base, bh.v_base);
-
-	/* Enable WB Cache coherency on SRAM */
-	temp = mv64x60_read(&bh, MV64360_SRAM_CONFIG);
-	pr_debug("SRAM_CONFIG: %x\n", temp);
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, temp & ~0x2);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, temp | 0x2);
-#endif
-	/* If system operates with internal bus arbiter (CPU master
-	 * control bit8) clear AACK Delay bit [25] in CPU
-	 * configuration register.
-	 */
-	temp = mv64x60_read(&bh, MV64x60_CPU_MASTER_CNTL);
-	if (temp & (1 << 8)) {
-		temp = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-		mv64x60_write(&bh, MV64x60_CPU_CONFIG, (temp & ~(1 << 25)));
-	}
-
-	/* Data and address parity is enabled */
-	temp = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-	mv64x60_write(&bh, MV64x60_CPU_CONFIG,
-		      (temp | (1 << 26) | (1 << 19)));
-
-	pci_dram_offset = 0;	/* sys mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ppc7d_map_irq;
-	ppc_md.pci_exclude_device = ppc7d_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->mem_space.start = PPC7D_PCI0_MEM0_START_PCI_LO_ADDR;
-	bh.hose_a->mem_space.end =
-	    PPC7D_PCI0_MEM0_START_PCI_LO_ADDR + PPC7D_PCI0_MEM0_SIZE;
-
-	/* These will be set later, as a result of PCI0 scan */
-	bh.hose_b->first_busno = 0;
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->mem_space.start = PPC7D_PCI1_MEM0_START_PCI_LO_ADDR;
-	bh.hose_b->mem_space.end =
-	    PPC7D_PCI1_MEM0_START_PCI_LO_ADDR + PPC7D_PCI1_MEM0_SIZE;
-
-	pr_debug("MV64360: PCI#0 IO decode %08x/%08x IO remap %08x\n",
-		 mv64x60_read(&bh, 0x48), mv64x60_read(&bh, 0x50),
-		 mv64x60_read(&bh, 0xf0));
-}
-
-static void __init ppc7d_setup_arch(void)
-{
-	int port;
-
-	loops_per_jiffy = 100000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	if ((cur_cpu_spec->cpu_features & CPU_FTR_SPEC7450) ||
-	    (cur_cpu_spec->cpu_features & CPU_FTR_L3CR))
-		/* 745x is different.  We only want to pass along enable. */
-		_set_L2CR(L2CR_L2E);
-	else if (cur_cpu_spec->cpu_features & CPU_FTR_L2CR)
-		/* All modules have 1MB of L2.  We also assume that an
-		 * L2 divisor of 3 will work.
-		 */
-		_set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
-			  | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
-
-	if (cur_cpu_spec->cpu_features & CPU_FTR_L3CR)
-		/* No L3 cache */
-		_set_L3CR(0);
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-	/* Lookup PCI host bridges */
-	if (ppc_md.progress)
-		ppc_md.progress("ppc7d_setup_arch: calling setup_bridge", 0);
-
-	ppc7d_setup_bridge();
-	ppc7d_setup_peripherals();
-
-	/* Disable ethernet. It might have been setup by the bootrom */
-	for (port = 0; port < 3; port++)
-		mv64x60_write(&bh, MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port),
-			      0x0000ff00);
-
-	/* Clear queue pointers to ensure they are all initialized,
-	 * otherwise since queues 1-7 are unused, they have random
-	 * pointers which look strange in register dumps. Don't bother
-	 * with queue 0 since it will be initialized later.
-	 */
-	for (port = 0; port < 3; port++) {
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port),
-			      0x00000000);
-	}
-
-	printk(KERN_INFO "Radstone Technology PPC7D\n");
-	if (ppc_md.progress)
-		ppc_md.progress("ppc7d_setup_arch: exit", 0);
-
-}
-
-/* Real Time Clock support.
- * PPC7D has a DS1337 accessed by I2C.
- */
-static ulong ppc7d_get_rtc_time(void)
-{
-        struct rtc_time tm;
-        int result;
-
-        spin_lock(&rtc_lock);
-        result = ds1337_do_command(0, DS1337_GET_DATE, &tm);
-        spin_unlock(&rtc_lock);
-
-        if (result == 0)
-                result = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec);
-
-        return result;
-}
-
-static int ppc7d_set_rtc_time(unsigned long nowtime)
-{
-        struct rtc_time tm;
-        int result;
-
-        spin_lock(&rtc_lock);
-        to_tm(nowtime, &tm);
-        result = ds1337_do_command(0, DS1337_SET_DATE, &tm);
-        spin_unlock(&rtc_lock);
-
-        return result;
-}
-
-/* This kernel command line parameter can be used to have the target
- * wait for a JTAG debugger to attach. Of course, a JTAG debugger
- * with hardware breakpoint support can have the target stop at any
- * location during init, but this is a convenience feature that makes
- * it easier in the common case of loading the code using the ppcboot
- * bootloader..
- */
-static unsigned long ppc7d_wait_debugger;
-
-static int __init ppc7d_waitdbg(char *str)
-{
-	ppc7d_wait_debugger = 1;
-	return 1;
-}
-
-__setup("waitdbg", ppc7d_waitdbg);
-
-/* Second phase board init, called after other (architecture common)
- * low-level services have been initialized.
- */
-static void ppc7d_init2(void)
-{
-	unsigned long flags;
-	u32 data;
-	u8 data8;
-
-	pr_debug("%s: enter\n", __func__);
-
-	/* Wait for debugger? */
-	if (ppc7d_wait_debugger) {
-		printk("Waiting for debugger...\n");
-
-		while (readl(&ppc7d_wait_debugger)) ;
-	}
-
-	/* Hook up i8259 interrupt which is connected to GPP28 */
-	request_irq(mv64360_irq_base + MV64x60_IRQ_GPP28, ppc7d_i8259_intr,
-		    IRQF_DISABLED, "I8259 (GPP28) interrupt", (void *)0);
-
-	/* Configure MPP16 as watchdog NMI, MPP17 as watchdog WDE */
-	spin_lock_irqsave(&mv64x60_lock, flags);
-	data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2);
-	data &= ~(0x0000000f << 0);
-	data |= (0x00000004 << 0);
-	data &= ~(0x0000000f << 4);
-	data |= (0x00000004 << 4);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data);
-	spin_unlock_irqrestore(&mv64x60_lock, flags);
-
-	/* All LEDs off */
-	data8 = inb(PPC7D_CPLD_LEDS);
-	data8 &= ~0x08;
-	data8 |= 0x07;
-	outb(data8, PPC7D_CPLD_LEDS);
-
-        /* Hook up RTC. We couldn't do this earlier because we need the I2C subsystem */
-        ppc_md.set_rtc_time = ppc7d_set_rtc_time;
-        ppc_md.get_rtc_time = ppc7d_get_rtc_time;
-
-	pr_debug("%s: exit\n", __func__);
-}
-
-/* Called from machine_init(), early, before any of the __init functions
- * have run. We must init software-configurable pins before other functions
- * such as interrupt controllers are initialised.
- */
-void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			  unsigned long r6, unsigned long r7)
-{
-	u8 val8;
-	u8 rev_num;
-
-	/* Map 0xe0000000-0xffffffff early because we need access to SRAM
-	 * and the ISA memory space (for serial port) here. This mapping
-	 * is redone properly in ppc7d_map_io() later.
-	 */
-	mtspr(SPRN_DBAT3U, 0xe0003fff);
-	mtspr(SPRN_DBAT3L, 0xe000002a);
-
-	/*
-	 * Zero SRAM. Note that this generates parity errors on
-	 * internal data path in SRAM if it's first time accessing it
-	 * after reset.
-	 *
-	 * We do this ASAP to avoid parity errors when reading
-	 * uninitialized SRAM.
-	 */
-	memset((void *)PPC7D_INTERNAL_SRAM_BASE, 0, MV64360_SRAM_SIZE);
-
-	pr_debug("platform_init: r3-r7: %lx %lx %lx %lx %lx\n",
-		 r3, r4, r5, r6, r7);
-
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		bd_t *bp = (bd_t *) __res;
-
-		/* copy board info structure */
-		memcpy((void *)__res, (void *)(r3 + KERNELBASE), sizeof(bd_t));
-		/* copy command line */
-		*(char *)(r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6 + KERNELBASE));
-
-		printk(KERN_INFO "Board info data:-\n");
-		printk(KERN_INFO "  Internal freq: %lu MHz, bus freq: %lu MHz\n",
-		       bp->bi_intfreq, bp->bi_busfreq);
-		printk(KERN_INFO "  Memory: %lx, size %lx\n", bp->bi_memstart,
-		       bp->bi_memsize);
-		printk(KERN_INFO "  Console baudrate: %lu\n", bp->bi_baudrate);
-		printk(KERN_INFO "  Ethernet address: "
-		       "%02x:%02x:%02x:%02x:%02x:%02x\n",
-		       bp->bi_enetaddr[0], bp->bi_enetaddr[1],
-		       bp->bi_enetaddr[2], bp->bi_enetaddr[3],
-		       bp->bi_enetaddr[4], bp->bi_enetaddr[5]);
-	}
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-		printk(KERN_INFO "INITRD @ %lx/%lx\n", initrd_start, initrd_end);
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	/* Map in board regs, etc. */
-	isa_io_base = 0xe8000000;
-	isa_mem_base = 0xe8000000;
-	pci_dram_offset = 0x00000000;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-
-	ppc_md.setup_arch = ppc7d_setup_arch;
-	ppc_md.init = ppc7d_init2;
-	ppc_md.show_cpuinfo = ppc7d_show_cpuinfo;
-	/* XXX this is broken... */
-	ppc_md.irq_canonicalize = ppc7d_irq_canonicalize;
-	ppc_md.init_IRQ = ppc7d_init_irq;
-	ppc_md.get_irq = ppc7d_get_irq;
-
-	ppc_md.restart = ppc7d_restart;
-	ppc_md.power_off = ppc7d_power_off;
-	ppc_md.halt = ppc7d_halt;
-
-	ppc_md.find_end_of_memory = ppc7d_find_end_of_memory;
-	ppc_md.setup_io_mappings = ppc7d_map_io;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = ppc7d_calibrate_decr;
-	ppc_md.nvram_read_val = NULL;
-	ppc_md.nvram_write_val = NULL;
-
-	ppc_md.heartbeat = ppc7d_heartbeat;
-	ppc_md.heartbeat_reset = HZ;
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-
-	ppc_md.pcibios_fixup_bus = ppc7d_pci_fixup_bus;
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH) || \
-    defined(CONFIG_I2C_MV64XXX)
-	platform_notify = ppc7d_platform_notify;
-#endif
-
-#ifdef CONFIG_SERIAL_MPSC
-	/* On PPC7D, we must configure MPSC support via CPLD control
-	 * registers.
-	 */
-	outb(PPC7D_CPLD_RTS_COM4_SCLK |
-	     PPC7D_CPLD_RTS_COM56_ENABLED, PPC7D_CPLD_RTS);
-	outb(PPC7D_CPLD_COMS_COM3_TCLKEN |
-	     PPC7D_CPLD_COMS_COM3_TXEN |
-	     PPC7D_CPLD_COMS_COM4_TCLKEN |
-	     PPC7D_CPLD_COMS_COM4_TXEN, PPC7D_CPLD_COMS);
-#endif /* CONFIG_SERIAL_MPSC */
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc7d_early_serial_map();
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ppc_md.progress = mv64x60_mpsc_progress;
-#elif defined(CONFIG_SERIAL_8250)
-	ppc_md.progress = gen550_progress;
-#else
-#error CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG has no supported CONFIG_SERIAL_XXX
-#endif /* CONFIG_SERIAL_8250 */
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#endif /* CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG */
-
-	/* Enable write access to user flash.  This is necessary for
-	 * flash probe.
-	 */
-	val8 = readb((void *)isa_io_base + PPC7D_CPLD_SW_FLASH_WRITE_PROTECT);
-	writeb(val8 | (PPC7D_CPLD_SW_FLASH_WRPROT_ENABLED &
-		       PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK),
-	       (void *)isa_io_base + PPC7D_CPLD_SW_FLASH_WRITE_PROTECT);
-
-	/* Determine if this board has IBM ALMA VME devices */
-	val8 = readb((void *)isa_io_base + PPC7D_CPLD_BOARD_REVISION);
-	rev_num = (val8 & PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK) >> 5;
-	if (rev_num <= 1)
-		ppc7d_has_alma = 1;
-
-#ifdef DEBUG
-	console_printk[0] = 8;
-#endif
-}
diff --git a/arch/ppc/platforms/radstone_ppc7d.h b/arch/ppc/platforms/radstone_ppc7d.h
deleted file mode 100644
index 2bb093a0c03e..000000000000
--- a/arch/ppc/platforms/radstone_ppc7d.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * Board definitions for the Radstone PPC7D boards.
- *
- * Author: James Chapman <jchapman@katalix.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 1MB
- * and start on a boundary that is a multiple of the window size):
- *
- *    0xff800000-0xffffffff      - Boot window
- *    0xff000000-0xff000fff	 - AFIX registers (DevCS2)
- *    0xfef00000-0xfef0ffff      - Internal MV64x60 registers
- *    0xfef40000-0xfef7ffff      - Internal SRAM
- *    0xfef00000-0xfef0ffff      - MV64360 Registers
- *    0x70000000-0x7fffffff      - soldered flash (DevCS3)
- *    0xe8000000-0xe9ffffff      - PCI I/O
- *    0x80000000-0xbfffffff      - PCI MEM
- */
-
-#ifndef __PPC_PLATFORMS_PPC7D_H
-#define __PPC_PLATFORMS_PPC7D_H
-
-#include <asm/ppcboot.h>
-
-/*****************************************************************************
- * CPU Physical Memory Map setup.
- *****************************************************************************/
-
-#define PPC7D_BOOT_WINDOW_BASE			0xff800000
-#define PPC7D_AFIX_REG_BASE			0xff000000
-#define PPC7D_INTERNAL_SRAM_BASE		0xfef40000
-#define PPC7D_FLASH_BASE			0x70000000
-
-#define PPC7D_BOOT_WINDOW_SIZE_ACTUAL		0x00800000 /* 8MB */
-#define PPC7D_FLASH_SIZE_ACTUAL			0x10000000 /* 256MB */
-
-#define PPC7D_BOOT_WINDOW_SIZE		max(MV64360_WINDOW_SIZE_MIN,	\
-		PPC7D_BOOT_WINDOW_SIZE_ACTUAL)
-#define PPC7D_FLASH_SIZE		max(MV64360_WINDOW_SIZE_MIN,	\
-		PPC7D_FLASH_SIZE_ACTUAL)
-#define PPC7D_AFIX_REG_SIZE		max(MV64360_WINDOW_SIZE_MIN, 0xff)
-
-
-#define PPC7D_PCI0_MEM0_START_PROC_ADDR        0x80000000UL
-#define PPC7D_PCI0_MEM0_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI0_MEM0_START_PCI_LO_ADDR      0x80000000UL
-#define PPC7D_PCI0_MEM0_SIZE                   0x20000000UL
-#define PPC7D_PCI0_MEM1_START_PROC_ADDR        0xe8010000UL
-#define PPC7D_PCI0_MEM1_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI0_MEM1_START_PCI_LO_ADDR      0x00000000UL
-#define PPC7D_PCI0_MEM1_SIZE                   0x000f0000UL
-#define PPC7D_PCI0_IO_START_PROC_ADDR          0xe8000000UL
-#define PPC7D_PCI0_IO_START_PCI_ADDR           0x00000000UL
-#define PPC7D_PCI0_IO_SIZE                     0x00010000UL
-
-#define PPC7D_PCI1_MEM0_START_PROC_ADDR        0xa0000000UL
-#define PPC7D_PCI1_MEM0_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI1_MEM0_START_PCI_LO_ADDR      0xa0000000UL
-#define PPC7D_PCI1_MEM0_SIZE                   0x20000000UL
-#define PPC7D_PCI1_MEM1_START_PROC_ADDR        0xe9800000UL
-#define PPC7D_PCI1_MEM1_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI1_MEM1_START_PCI_LO_ADDR      0x00000000UL
-#define PPC7D_PCI1_MEM1_SIZE                   0x00800000UL
-#define PPC7D_PCI1_IO_START_PROC_ADDR          0xe9000000UL
-#define PPC7D_PCI1_IO_START_PCI_ADDR           0x00000000UL
-#define PPC7D_PCI1_IO_SIZE                     0x00010000UL
-
-#define	PPC7D_DEFAULT_BAUD			9600
-#define	PPC7D_MPSC_CLK_SRC			8	  /* TCLK */
-#define	PPC7D_MPSC_CLK_FREQ			133333333 /* 133.3333... MHz */
-
-#define	PPC7D_ETH0_PHY_ADDR			8
-#define	PPC7D_ETH1_PHY_ADDR			9
-#define	PPC7D_ETH2_PHY_ADDR			0
-
-#define PPC7D_ETH_TX_QUEUE_SIZE			400
-#define PPC7D_ETH_RX_QUEUE_SIZE			400
-
-#define	PPC7D_ETH_PORT_CONFIG_VALUE			\
-	MV64340_ETH_UNICAST_NORMAL_MODE			|	\
-	MV64340_ETH_DEFAULT_RX_QUEUE_0			|	\
-	MV64340_ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
-	MV64340_ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
-	MV64340_ETH_RECEIVE_BC_IF_IP			|	\
-	MV64340_ETH_RECEIVE_BC_IF_ARP			|	\
-	MV64340_ETH_CAPTURE_TCP_FRAMES_DIS		|	\
-	MV64340_ETH_CAPTURE_UDP_FRAMES_DIS		|	\
-	MV64340_ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
-	MV64340_ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
-	MV64340_ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define	PPC7D_ETH_PORT_CONFIG_EXTEND_VALUE		\
-	MV64340_ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
-	MV64340_ETH_PARTITION_DISABLE
-
-#define	GT_ETH_IPG_INT_RX(value)			\
-	((value & 0x3fff) << 8)
-
-#define	PPC7D_ETH_PORT_SDMA_CONFIG_VALUE		\
-	MV64340_ETH_RX_BURST_SIZE_4_64BIT		|	\
-	GT_ETH_IPG_INT_RX(0)			|	\
-	MV64340_ETH_TX_BURST_SIZE_4_64BIT
-
-#define	PPC7D_ETH_PORT_SERIAL_CONTROL_VALUE		\
-	MV64340_ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-	MV64340_ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-	MV64340_ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-	MV64340_ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-	MV64340_ETH_FORCE_BP_MODE_NO_JAM		|	\
-	(1 << 9)					|	\
-	MV64340_ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-	MV64340_ETH_RETRANSMIT_16_ATTEMPTS		|	\
-	MV64340_ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-	MV64340_ETH_DTE_ADV_0				|	\
-	MV64340_ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-	MV64340_ETH_AUTO_NEG_NO_CHANGE			|	\
-	MV64340_ETH_MAX_RX_PACKET_9700BYTE		|	\
-	MV64340_ETH_CLR_EXT_LOOPBACK			|	\
-	MV64340_ETH_SET_FULL_DUPLEX_MODE		|	\
-	MV64340_ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-/*****************************************************************************
- * Serial defines.
- *****************************************************************************/
-
-#define PPC7D_SERIAL_0		0xe80003f8
-#define PPC7D_SERIAL_1		0xe80002f8
-
-#define RS_TABLE_SIZE  2
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define UART_CLK			1843200
-#define BASE_BAUD			( UART_CLK / 16 )
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PPC7D_SERIAL_0, 4, STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (u8 *)PPC7D_SERIAL_0,			  \
-		io_type: SERIAL_IO_MEM, },				  \
-        { 0, BASE_BAUD, PPC7D_SERIAL_1, 3, STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (u8 *)PPC7D_SERIAL_1,			  \
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-/*****************************************************************************
- * CPLD defines.
- *
- * Register map:-
- *
- * 0000 to 000F 	South Bridge DMA 1 Control
- * 0020 and 0021 	South Bridge Interrupt 1 Control
- * 0040 to 0043 	South Bridge Counter Control
- * 0060 		Keyboard
- * 0061 		South Bridge NMI Status and Control
- * 0064 		Keyboard
- * 0071 and 0072 	RTC R/W
- * 0078 to 007B 	South Bridge BIOS Timer
- * 0080 to 0090 	South Bridge DMA Pages
- * 00A0 and 00A1 	South Bridge Interrupt 2 Control
- * 00C0 to 00DE 	South Bridge DMA 2 Control
- * 02E8 to 02EF 	COM6 R/W
- * 02F8 to 02FF 	South Bridge COM2 R/W
- * 03E8 to 03EF 	COM5 R/W
- * 03F8 to 03FF 	South Bridge COM1 R/W
- * 040A 		South Bridge DMA Scatter/Gather RO
- * 040B 		DMA 1 Extended Mode WO
- * 0410 to 043F 	South Bridge DMA Scatter/Gather
- * 0481 to 048B 	South Bridge DMA High Pages
- * 04D0 and 04D1 	South Bridge Edge/Level Control
- * 04D6 		DMA 2 Extended Mode WO
- * 0804 		Memory Configuration RO
- * 0806 		Memory Configuration Extend RO
- * 0808 		SCSI Activity LED R/W
- * 080C 		Equipment Present 1 RO
- * 080E 		Equipment Present 2 RO
- * 0810 		Equipment Present 3 RO
- * 0812 		Equipment Present 4 RO
- * 0818 		Key Lock RO
- * 0820 		LEDS R/W
- * 0824 		COMs R/W
- * 0826 		RTS R/W
- * 0828 		Reset R/W
- * 082C 		Watchdog Trig R/W
- * 082E 		Interrupt R/W
- * 0830 		Interrupt Status RO
- * 0832 		PCI configuration RO
- * 0854 		Board Revision RO
- * 0858 		Extended ID RO
- * 0864 		ID Link RO
- * 0866 		Motherboard Type RO
- * 0868 		FLASH Write control RO
- * 086A 		Software FLASH write protect R/W
- * 086E 		FLASH Control R/W
- *****************************************************************************/
-
-#define PPC7D_CPLD_MEM_CONFIG			0x0804
-#define PPC7D_CPLD_MEM_CONFIG_EXTEND		0x0806
-#define PPC7D_CPLD_SCSI_ACTIVITY_LED		0x0808
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_1		0x080C
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_2		0x080E
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_3		0x0810
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_4		0x0812
-#define PPC7D_CPLD_KEY_LOCK			0x0818
-#define PPC7D_CPLD_LEDS				0x0820
-#define PPC7D_CPLD_COMS				0x0824
-#define PPC7D_CPLD_RTS				0x0826
-#define PPC7D_CPLD_RESET			0x0828
-#define PPC7D_CPLD_WATCHDOG_TRIG		0x082C
-#define PPC7D_CPLD_INTR				0x082E
-#define PPC7D_CPLD_INTR_STATUS			0x0830
-#define PPC7D_CPLD_PCI_CONFIG			0x0832
-#define PPC7D_CPLD_BOARD_REVISION		0x0854
-#define PPC7D_CPLD_EXTENDED_ID			0x0858
-#define PPC7D_CPLD_ID_LINK			0x0864
-#define PPC7D_CPLD_MOTHERBOARD_TYPE		0x0866
-#define PPC7D_CPLD_FLASH_WRITE_CNTL		0x0868
-#define PPC7D_CPLD_SW_FLASH_WRITE_PROTECT	0x086A
-#define PPC7D_CPLD_FLASH_CNTL			0x086E
-
-/* MEMORY_CONFIG_EXTEND */
-#define PPC7D_CPLD_SDRAM_BANK_NUM_MASK		0x02
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_MASK		0xc0
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_128M		0
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_256M		0x40
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_512M		0x80
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_1G		0xc0
-#define PPC7D_CPLD_FLASH_DEV_SIZE_MASK		0x03
-#define PPC7D_CPLD_FLASH_BANK_NUM_MASK		0x0c
-#define PPC7D_CPLD_FLASH_DEV_SIZE_64M		0
-#define PPC7D_CPLD_FLASH_DEV_SIZE_32M		1
-#define PPC7D_CPLD_FLASH_DEV_SIZE_16M		3
-#define PPC7D_CPLD_FLASH_BANK_NUM_4		0x00
-#define PPC7D_CPLD_FLASH_BANK_NUM_3		0x04
-#define PPC7D_CPLD_FLASH_BANK_NUM_2		0x08
-#define PPC7D_CPLD_FLASH_BANK_NUM_1		0x0c
-
-/* SCSI_LED */
-#define PPC7D_CPLD_SCSI_ACTIVITY_LED_OFF	0
-#define PPC7D_CPLD_SCSI_ACTIVITY_LED_ON		1
-
-/* EQUIPMENT_PRESENT_1 */
-#define PPC7D_CPLD_EQPT_PRES_1_FITTED		0
-#define PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK	(0x80 >> 4)
-
-/* EQUIPMENT_PRESENT_2 */
-#define PPC7D_CPLD_EQPT_PRES_2_FITTED		!0
-#define PPC7D_CPLD_EQPT_PRES_2_UNIVERSE_MASK	(0x80 >> 0)
-#define PPC7D_CPLD_EQPT_PRES_2_COM36_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_2_GIGE_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_2_DUALGIGE_MASK	(0x80 >> 4)
-
-/* EQUIPMENT_PRESENT_3 */
-#define PPC7D_CPLD_EQPT_PRES_3_PMC2_V_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC2_5V		(0 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC2_3V		(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC1_V_MASK	(0x80 >> 4)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC1_5V		(0 >> 4)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC1_3V		(0x80 >> 4)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_MASK	(0x80 >> 5)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_INTER	(0 >> 5)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_VME	(0x80 >> 5)
-
-/* EQUIPMENT_PRESENT_4 */
-#define PPC7D_CPLD_EQPT_PRES_4_LPT_MASK		(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_4_LPT_FITTED	(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_4_PS2_USB2_MASK	(0xc0 >> 6)
-#define PPC7D_CPLD_EQPT_PRES_4_PS2_FITTED	(0x40 >> 6)
-#define PPC7D_CPLD_EQPT_PRES_4_USB2_FITTED	(0x80 >> 6)
-
-/* CPLD_LEDS */
-#define PPC7D_CPLD_LEDS_ON			(!0)
-#define PPC7D_CPLD_LEDS_OFF			(0)
-#define PPC7D_CPLD_LEDS_NVRAM_PAGE_MASK		(0xc0 >> 2)
-#define PPC7D_CPLD_LEDS_DS201_MASK		(0x80 >> 4)
-#define PPC7D_CPLD_LEDS_DS219_MASK		(0x80 >> 5)
-#define PPC7D_CPLD_LEDS_DS220_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_LEDS_DS221_MASK		(0x80 >> 7)
-
-/* CPLD_COMS */
-#define PPC7D_CPLD_COMS_COM3_TCLKEN		(0x80 >> 0)
-#define PPC7D_CPLD_COMS_COM3_RTCLKEN		(0x80 >> 1)
-#define PPC7D_CPLD_COMS_COM3_MODE_MASK		(0x80 >> 2)
-#define PPC7D_CPLD_COMS_COM3_MODE_RS232		(0)
-#define PPC7D_CPLD_COMS_COM3_MODE_RS422		(0x80 >> 2)
-#define PPC7D_CPLD_COMS_COM3_TXEN		(0x80 >> 3)
-#define PPC7D_CPLD_COMS_COM4_TCLKEN		(0x80 >> 4)
-#define PPC7D_CPLD_COMS_COM4_RTCLKEN		(0x80 >> 5)
-#define PPC7D_CPLD_COMS_COM4_MODE_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_COMS_COM4_MODE_RS232		(0)
-#define PPC7D_CPLD_COMS_COM4_MODE_RS422		(0x80 >> 6)
-#define PPC7D_CPLD_COMS_COM4_TXEN		(0x80 >> 7)
-
-/* CPLD_RTS */
-#define PPC7D_CPLD_RTS_COM36_LOOPBACK		(0x80 >> 0)
-#define PPC7D_CPLD_RTS_COM4_SCLK		(0x80 >> 1)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_MASK		(0xc0 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_DISABLED	(0 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_ENABLED	(0x80 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_ENABLED_RTG3	(0xc0 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_ENABLED_RTG3S (0xc0 >> 2)
-#define PPC7D_CPLD_RTS_COM56_MODE_MASK		(0x80 >> 4)
-#define PPC7D_CPLD_RTS_COM56_MODE_RS232		(0)
-#define PPC7D_CPLD_RTS_COM56_MODE_RS422		(0x80 >> 4)
-#define PPC7D_CPLD_RTS_COM56_ENABLE_MASK	(0x80 >> 5)
-#define PPC7D_CPLD_RTS_COM56_DISABLED		(0)
-#define PPC7D_CPLD_RTS_COM56_ENABLED		(0x80 >> 5)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_MASK		(0xc0 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_DISABLED	(0 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_ENABLED	(0x80 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_ENABLED_RTG3	(0x40 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_ENABLED_RTG3S (0x40 >> 6)
-
-/* WATCHDOG_TRIG */
-#define PPC7D_CPLD_WDOG_CAUSE_MASK		(0x80 >> 0)
-#define PPC7D_CPLD_WDOG_CAUSE_NORMAL_RESET	(0 >> 0)
-#define PPC7D_CPLD_WDOG_CAUSE_WATCHDOG		(0x80 >> 0)
-#define PPC7D_CPLD_WDOG_ENABLE_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_WDOG_ENABLE_OFF		(0 >> 6)
-#define PPC7D_CPLD_WDOG_ENABLE_ON		(0x80 >> 6)
-#define PPC7D_CPLD_WDOG_RESETSW_MASK		(0x80 >> 7)
-#define PPC7D_CPLD_WDOG_RESETSW_OFF		(0 >> 7)
-#define PPC7D_CPLD_WDOG_RESETSW_ON		(0x80 >> 7)
-
-/* Interrupt mask and status bits */
-#define PPC7D_CPLD_INTR_TEMP_MASK		(0x80 >> 0)
-#define PPC7D_CPLD_INTR_HB8_MASK		(0x80 >> 1)
-#define PPC7D_CPLD_INTR_PHY1_MASK		(0x80 >> 2)
-#define PPC7D_CPLD_INTR_PHY0_MASK		(0x80 >> 3)
-#define PPC7D_CPLD_INTR_ISANMI_MASK		(0x80 >> 5)
-#define PPC7D_CPLD_INTR_CRITTEMP_MASK		(0x80 >> 6)
-
-/* CPLD_INTR */
-#define PPC7D_CPLD_INTR_ENABLE_OFF		(0)
-#define PPC7D_CPLD_INTR_ENABLE_ON		(!0)
-
-/* CPLD_INTR_STATUS */
-#define PPC7D_CPLD_INTR_STATUS_OFF		(0)
-#define PPC7D_CPLD_INTR_STATUS_ON		(!0)
-
-/* CPLD_PCI_CONFIG */
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_MASK		0x70
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCI33	0x00
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCI66	0x10
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX33	0x40
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX66	0x50
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX100      0x60
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX133	0x70
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_MASK		0x07
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCI33	0x00
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCI66	0x01
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX33	0x04
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX66	0x05
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX100	0x06
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX133	0x07
-
-/* CPLD_BOARD_REVISION */
-#define PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK	0xe0
-#define PPC7D_CPLD_BOARD_REVISION_LETTER_MASK	0x1f
-
-/* CPLD_EXTENDED_ID */
-#define PPC7D_CPLD_EXTENDED_ID_PPC7D		0x18
-
-/* CPLD_ID_LINK */
-#define PPC7D_CPLD_ID_LINK_VME64_GAP_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_ID_LINK_VME64_GA4_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_ID_LINK_E13_MASK		(0x80 >> 4)
-#define PPC7D_CPLD_ID_LINK_E12_MASK		(0x80 >> 5)
-#define PPC7D_CPLD_ID_LINK_E7_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_ID_LINK_E6_MASK		(0x80 >> 7)
-
-/* CPLD_MOTHERBOARD_TYPE */
-#define PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK	(0x80 >> 0)
-#define PPC7D_CPLD_MB_TYPE_ECC_ENABLED		(0x80 >> 0)
-#define PPC7D_CPLD_MB_TYPE_ECC_DISABLED		(0 >> 0)
-#define PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_MB_TYPE_PLL_MASK		0x0c
-#define PPC7D_CPLD_MB_TYPE_PLL_133		0x00
-#define PPC7D_CPLD_MB_TYPE_PLL_100		0x08
-#define PPC7D_CPLD_MB_TYPE_PLL_64		0x04
-#define PPC7D_CPLD_MB_TYPE_HW_ID_MASK		0x03
-
-/* CPLD_FLASH_WRITE_CNTL */
-#define PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK	(0x80 >> 0)
-#define PPD7D_CPLD_FLASH_CNTL_WR_LINK_FITTED	(0x80 >> 0)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK	(0x80 >> 2)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_FITTED	(0x80 >> 2)
-#define PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK	(0x80 >> 3)
-#define PPD7D_CPLD_FLASH_CNTL_USER_LINK_FITTED	(0x80 >> 3)
-#define PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK	(0x80 >> 5)
-#define PPD7D_CPLD_FLASH_CNTL_RECO_WR_ENABLED	(0x80 >> 5)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK	(0x80 >> 6)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_WR_ENABLED	(0x80 >> 6)
-#define PPD7D_CPLD_FLASH_CNTL_USER_WR_MASK	(0x80 >> 7)
-#define PPD7D_CPLD_FLASH_CNTL_USER_WR_ENABLED	(0x80 >> 7)
-
-/* CPLD_SW_FLASH_WRITE_PROTECT */
-#define PPC7D_CPLD_SW_FLASH_WRPROT_ENABLED	(!0)
-#define PPC7D_CPLD_SW_FLASH_WRPROT_DISABLED	(0)
-#define PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK	(0x80 >> 6)
-#define PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK	(0x80 >> 7)
-
-/* CPLD_FLASH_WRITE_CNTL */
-#define PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK	(0x80 >> 0)
-#define PPC7D_CPLD_FLASH_CNTL_NVRAM_DISABLED	(0 >> 0)
-#define PPC7D_CPLD_FLASH_CNTL_NVRAM_ENABLED	(0x80 >> 0)
-#define PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK	(0x80 >> 1)
-#define PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK	(0x80 >> 3)
-
-
-#endif /* __PPC_PLATFORMS_PPC7D_H */
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
deleted file mode 100644
index d687b0f8763b..000000000000
--- a/arch/ppc/platforms/residual.c
+++ /dev/null
@@ -1,1034 +0,0 @@
-/*
- * Code to deal with the PReP residual data.
- *
- * Written by: Cort Dougan (cort@cs.nmt.edu)
- * Improved _greatly_ and rewritten by Gabriel Paubert (paubert@iram.es)
- *
- *  This file is based on the following documentation:
- *
- *	IBM Power Personal Systems Architecture
- *	Residual Data
- * 	Document Number: PPS-AR-FW0001
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- *
- */
-
-#include <linux/string.h>
-#include <asm/residual.h>
-#include <asm/pnp.h>
-#include <asm/byteorder.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-
-#include <asm/sections.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/ide.h>
-
-
-unsigned char __res[sizeof(RESIDUAL)] = {0,};
-RESIDUAL *res = (RESIDUAL *)&__res;
-
-char * PnP_BASE_TYPES[] __initdata = {
-  "Reserved",
-  "MassStorageDevice",
-  "NetworkInterfaceController",
-  "DisplayController",
-  "MultimediaController",
-  "MemoryController",
-  "BridgeController",
-  "CommunicationsDevice",
-  "SystemPeripheral",
-  "InputDevice",
-  "ServiceProcessor"
-  };
-
-/* Device Sub Type Codes */
-
-unsigned char * PnP_SUB_TYPES[] __initdata = {
-  "\001\000SCSIController",
-  "\001\001IDEController",
-  "\001\002FloppyController",
-  "\001\003IPIController",
-  "\001\200OtherMassStorageController",
-  "\002\000EthernetController",
-  "\002\001TokenRingController",
-  "\002\002FDDIController",
-  "\002\0x80OtherNetworkController",
-  "\003\000VGAController",
-  "\003\001SVGAController",
-  "\003\002XGAController",
-  "\003\200OtherDisplayController",
-  "\004\000VideoController",
-  "\004\001AudioController",
-  "\004\200OtherMultimediaController",
-  "\005\000RAM",
-  "\005\001FLASH",
-  "\005\200OtherMemoryDevice",
-  "\006\000HostProcessorBridge",
-  "\006\001ISABridge",
-  "\006\002EISABridge",
-  "\006\003MicroChannelBridge",
-  "\006\004PCIBridge",
-  "\006\005PCMCIABridge",
-  "\006\006VMEBridge",
-  "\006\200OtherBridgeDevice",
-  "\007\000RS232Device",
-  "\007\001ATCompatibleParallelPort",
-  "\007\200OtherCommunicationsDevice",
-  "\010\000ProgrammableInterruptController",
-  "\010\001DMAController",
-  "\010\002SystemTimer",
-  "\010\003RealTimeClock",
-  "\010\004L2Cache",
-  "\010\005NVRAM",
-  "\010\006PowerManagement",
-  "\010\007CMOS",
-  "\010\010OperatorPanel",
-  "\010\011ServiceProcessorClass1",
-  "\010\012ServiceProcessorClass2",
-  "\010\013ServiceProcessorClass3",
-  "\010\014GraphicAssist",
-  "\010\017SystemPlanar",
-  "\010\200OtherSystemPeripheral",
-  "\011\000KeyboardController",
-  "\011\001Digitizer",
-  "\011\002MouseController",
-  "\011\003TabletController",
-  "\011\0x80OtherInputController",
-  "\012\000GeneralMemoryController",
-  NULL
-};
-
-/* Device Interface Type Codes */
-
-unsigned char * PnP_INTERFACES[] __initdata = {
-  "\000\000\000General",
-  "\001\000\000GeneralSCSI",
-  "\001\001\000GeneralIDE",
-  "\001\001\001ATACompatible",
-
-  "\001\002\000GeneralFloppy",
-  "\001\002\001Compatible765",
-  "\001\002\002NS398_Floppy",         /* NS Super I/O wired to use index
-                                         register at port 398 and data
-                                         register at port 399               */
-  "\001\002\003NS26E_Floppy",         /* Ports 26E and 26F                  */
-  "\001\002\004NS15C_Floppy",         /* Ports 15C and 15D                  */
-  "\001\002\005NS2E_Floppy",          /* Ports 2E and 2F                    */
-  "\001\002\006CHRP_Floppy",          /* CHRP Floppy in PR*P system         */
-
-  "\001\003\000GeneralIPI",
-
-  "\002\000\000GeneralEther",
-  "\002\001\000GeneralToken",
-  "\002\002\000GeneralFDDI",
-
-  "\003\000\000GeneralVGA",
-  "\003\001\000GeneralSVGA",
-  "\003\002\000GeneralXGA",
-
-  "\004\000\000GeneralVideo",
-  "\004\001\000GeneralAudio",
-  "\004\001\001CS4232Audio",            /* CS 4232 Plug 'n Play Configured    */
-
-  "\005\000\000GeneralRAM",
-  /* This one is obviously wrong ! */
-  "\005\000\000PCIMemoryController",    /* PCI Config Method                  */
-  "\005\000\001RS6KMemoryController",   /* RS6K Config Method                 */
-  "\005\001\000GeneralFLASH",
-
-  "\006\000\000GeneralHostBridge",
-  "\006\001\000GeneralISABridge",
-  "\006\002\000GeneralEISABridge",
-  "\006\003\000GeneralMCABridge",
-  /* GeneralPCIBridge = 0, */
-  "\006\004\000PCIBridgeDirect",
-  "\006\004\001PCIBridgeIndirect",
-  "\006\004\002PCIBridgeRS6K",
-  "\006\005\000GeneralPCMCIABridge",
-  "\006\006\000GeneralVMEBridge",
-
-  "\007\000\000GeneralRS232",
-  "\007\000\001COMx",
-  "\007\000\002Compatible16450",
-  "\007\000\003Compatible16550",
-  "\007\000\004NS398SerPort",         /* NS Super I/O wired to use index
-                                         register at port 398 and data
-                                         register at port 399               */
-  "\007\000\005NS26ESerPort",         /* Ports 26E and 26F                  */
-  "\007\000\006NS15CSerPort",         /* Ports 15C and 15D                  */
-  "\007\000\007NS2ESerPort",          /* Ports 2E and 2F                    */
-
-  "\007\001\000GeneralParPort",
-  "\007\001\001LPTx",
-  "\007\001\002NS398ParPort",         /* NS Super I/O wired to use index
-                                         register at port 398 and data
-                                         register at port 399               */
-  "\007\001\003NS26EParPort",         /* Ports 26E and 26F                  */
-  "\007\001\004NS15CParPort",         /* Ports 15C and 15D                  */
-  "\007\001\005NS2EParPort",          /* Ports 2E and 2F                    */
-
-  "\010\000\000GeneralPIC",
-  "\010\000\001ISA_PIC",
-  "\010\000\002EISA_PIC",
-  "\010\000\003MPIC",
-  "\010\000\004RS6K_PIC",
-
-  "\010\001\000GeneralDMA",
-  "\010\001\001ISA_DMA",
-  "\010\001\002EISA_DMA",
-
-  "\010\002\000GeneralTimer",
-  "\010\002\001ISA_Timer",
-  "\010\002\002EISA_Timer",
-  "\010\003\000GeneralRTC",
-  "\010\003\001ISA_RTC",
-
-  "\010\004\001StoreThruOnly",
-  "\010\004\002StoreInEnabled",
-  "\010\004\003RS6KL2Cache",
-
-  "\010\005\000IndirectNVRAM",        /* Indirectly addressed               */
-  "\010\005\001DirectNVRAM",          /* Memory Mapped                      */
-  "\010\005\002IndirectNVRAM24",      /* Indirectly addressed - 24 bit      */
-
-  "\010\006\000GeneralPowerManagement",
-  "\010\006\001EPOWPowerManagement",
-  "\010\006\002PowerControl",         // d1378
-
-  "\010\007\000GeneralCMOS",
-
-  "\010\010\000GeneralOPPanel",
-  "\010\010\001HarddiskLight",
-  "\010\010\002CDROMLight",
-  "\010\010\003PowerLight",
-  "\010\010\004KeyLock",
-  "\010\010\005ANDisplay",            /* AlphaNumeric Display               */
-  "\010\010\006SystemStatusLED",      /* 3 digit 7 segment LED              */
-  "\010\010\007CHRP_SystemStatusLED", /* CHRP LEDs in PR*P system           */
-
-  "\010\011\000GeneralServiceProcessor",
-  "\010\012\000GeneralServiceProcessor",
-  "\010\013\000GeneralServiceProcessor",
-
-  "\010\014\001TransferData",
-  "\010\014\002IGMC32",
-  "\010\014\003IGMC64",
-
-  "\010\017\000GeneralSystemPlanar",   /* 10/5/95                            */
-  NULL
-  };
-
-static const unsigned char __init *PnP_SUB_TYPE_STR(unsigned char BaseType,
-					     unsigned char SubType) {
-	unsigned char ** s=PnP_SUB_TYPES;
-	while (*s && !((*s)[0]==BaseType
-		       && (*s)[1]==SubType)) s++;
-	if (*s) return *s+2;
-	else return("Unknown !");
-};
-
-static const unsigned char __init *PnP_INTERFACE_STR(unsigned char BaseType,
-					      unsigned char SubType,
-					      unsigned char Interface) {
-	unsigned char ** s=PnP_INTERFACES;
-	while (*s && !((*s)[0]==BaseType
-		       && (*s)[1]==SubType
-		       && (*s)[2]==Interface)) s++;
-	if (*s) return *s+3;
-	else return NULL;
-};
-
-static void __init printsmallvendor(PnP_TAG_PACKET *pkt, int size) {
-	int i, c;
-	char decomp[4];
-#define p pkt->S14_Pack.S14_Data.S14_PPCPack
-	switch(p.Type) {
-	case 1:
-	  /* Decompress first 3 chars */
-	  c = *(unsigned short *)p.PPCData;
-	  decomp[0]='A'-1+((c>>10)&0x1F);
-	  decomp[1]='A'-1+((c>>5)&0x1F);
-	  decomp[2]='A'-1+(c&0x1F);
-	  decomp[3]=0;
-	  printk("    Chip identification: %s%4.4X\n",
-		 decomp, ld_le16((unsigned short *)(p.PPCData+2)));
-	  break;
-	default:
-	  printk("    Small vendor item type 0x%2.2x, data (hex): ",
-		 p.Type);
-	  for(i=0; i<size-2; i++) printk("%2.2x ", p.PPCData[i]);
-	  printk("\n");
-	  break;
-	}
-#undef p
-}
-
-static void __init printsmallpacket(PnP_TAG_PACKET * pkt, int size) {
-	static const unsigned char * intlevel[] = {"high", "low"};
-	static const unsigned char * intsense[] = {"edge", "level"};
-
-	switch (tag_small_item_name(pkt->S1_Pack.Tag)) {
-	case PnPVersion:
-	  printk("    PnPversion 0x%x.%x\n",
-		 pkt->S1_Pack.Version[0], /* How to interpret version ? */
-		 pkt->S1_Pack.Version[1]);
-	  break;
-//	case Logicaldevice:
-	  break;
-//	case CompatibleDevice:
-	  break;
-	case IRQFormat:
-#define p pkt->S4_Pack
-	  printk("    IRQ Mask 0x%4.4x, %s %s sensitive\n",
-		 ld_le16((unsigned short *)p.IRQMask),
-		 intlevel[(size>3) ? !(p.IRQInfo&0x05) : 0],
-		 intsense[(size>3) ? !(p.IRQInfo&0x03) : 0]);
-#undef p
-	  break;
-	case DMAFormat:
-#define p pkt->S5_Pack
-	  printk("    DMA channel mask 0x%2.2x, info 0x%2.2x\n",
-		 p.DMAMask, p.DMAInfo);
-#undef p
-	  break;
-	case StartDepFunc:
-	  printk("Start dependent function:\n");
-	  break;
-	case EndDepFunc:
-	  printk("End dependent function\n");
-	  break;
-	case IOPort:
-#define p pkt->S8_Pack
-	  printk("    Variable (%d decoded bits) I/O port\n"
-		 "      from 0x%4.4x to 0x%4.4x, alignment %d, %d ports\n",
-		 p.IOInfo&ISAAddr16bit?16:10,
-		 ld_le16((unsigned short *)p.RangeMin),
- 		 ld_le16((unsigned short *)p.RangeMax),
-		 p.IOAlign, p.IONum);
-#undef p
-	  break;
-	case FixedIOPort:
-#define p pkt->S9_Pack
-	  printk("    Fixed (10 decoded bits) I/O port from %3.3x to %3.3x\n",
-		 (p.Range[1]<<8)|p.Range[0],
-		 ((p.Range[1]<<8)|p.Range[0])+p.IONum-1);
-#undef p
-	  break;
-	case Res1:
-	case Res2:
-	case Res3:
-	  printk("    Undefined packet type %d!\n",
-		 tag_small_item_name(pkt->S1_Pack.Tag));
-	  break;
-	case SmallVendorItem:
-	  printsmallvendor(pkt,size);
-	  break;
-	default:
-	  printk("    Type 0x2.2x%d, size=%d\n",
-		 pkt->S1_Pack.Tag, size);
-	  break;
-	}
-}
-
-static void __init printlargevendor(PnP_TAG_PACKET * pkt, int size) {
-	static const unsigned char * addrtype[] = {"I/O", "Memory", "System"};
-	static const unsigned char * inttype[] = {"8259", "MPIC", "RS6k BUID %d"};
-	static const unsigned char * convtype[] = {"Bus Memory", "Bus I/O", "DMA"};
-	static const unsigned char * transtype[] = {"direct", "mapped", "direct-store segment"};
-	static const unsigned char * L2type[] = {"WriteThru", "CopyBack"};
-	static const unsigned char * L2assoc[] = {"DirectMapped", "2-way set"};
-
-	int i;
-	char tmpstr[30], *t;
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-	switch(p.Type) {
-	case 2:
-	  printk("    %d K %s %s L2 cache, %d/%d bytes line/sector size\n",
-		 ld_le32((unsigned int *)p.PPCData),
-		 L2type[p.PPCData[10]-1],
-		 L2assoc[p.PPCData[4]-1],
-		 ld_le16((unsigned short *)p.PPCData+3),
-		 ld_le16((unsigned short *)p.PPCData+4));
-	  break;
-	case 3:
-	  printk("    PCI Bridge parameters\n"
-		 "      ConfigBaseAddress %0x\n"
-		 "      ConfigBaseData %0x\n"
-		 "      Bus number %d\n",
-		 ld_le32((unsigned int *)p.PPCData),
-		 ld_le32((unsigned int *)(p.PPCData+8)),
-		 p.PPCData[16]);
-	  for(i=20; i<size-4; i+=12) {
-	  	int j, first;
-	  	if(p.PPCData[i]) printk("      PCI Slot %d", p.PPCData[i]);
-		else printk ("      Integrated PCI device");
-		for(j=0, first=1, t=tmpstr; j<4; j++) {
-			int line=ld_le16((unsigned short *)(p.PPCData+i+4)+j);
-			if(line!=0xffff){
-			        if(first) first=0; else *t++='/';
-				*t++='A'+j;
-			}
-		}
-		*t='\0';
-		printk(" DevFunc 0x%x interrupt line(s) %s routed to",
-		       p.PPCData[i+1],tmpstr);
-		sprintf(tmpstr,
-			inttype[p.PPCData[i+2]-1],
-			p.PPCData[i+3]);
-		printk(" %s line(s) ",
-		       tmpstr);
-		for(j=0, first=1, t=tmpstr; j<4; j++) {
-			int line=ld_le16((unsigned short *)(p.PPCData+i+4)+j);
-			if(line!=0xffff){
-				if(first) first=0; else *t++='/';
-				t+=sprintf(t,"%d(%c)",
-					   line&0x7fff,
-					   line&0x8000?'E':'L');
-			}
-		}
-		printk("%s\n",tmpstr);
-	  }
-	  break;
-	case 5:
-	  printk("    Bridge address translation, %s decoding:\n"
-		 "      Processor  Bus        Size       Conversion Translation\n"
-		 "      0x%8.8x 0x%8.8x 0x%8.8x %s %s\n",
-		 p.PPCData[0]&1 ? "positive" : "subtractive",
-		 ld_le32((unsigned int *)p.PPCData+1),
-		 ld_le32((unsigned int *)p.PPCData+3),
-		 ld_le32((unsigned int *)p.PPCData+5),
-		 convtype[p.PPCData[2]-1],
-		 transtype[p.PPCData[1]-1]);
-	  break;
-	case 6:
-	  printk("    Bus speed %d Hz, %d slot(s)\n",
-		 ld_le32((unsigned int *)p.PPCData),
-		 p.PPCData[4]);
-	  break;
-	case 7:
-	  printk("    SCSI buses: %d, id(s):", p.PPCData[0]);
-	  for(i=1; i<=p.PPCData[0]; i++)
-	    printk(" %d%c", p.PPCData[i], i==p.PPCData[0] ? '\n' : ',');
-	  break;
-	case 9:
-	  printk("    %s address (%d bits), at 0x%x size 0x%x bytes\n",
-		 addrtype[p.PPCData[0]-1],
-		 p.PPCData[1],
-		 ld_le32((unsigned int *)(p.PPCData+4)),
-		 ld_le32((unsigned int *)(p.PPCData+12)));
-	  break;
-	case 10:
-	  sprintf(tmpstr,
-		  inttype[p.PPCData[0]-1],
-		  p.PPCData[1]);
-
-	  printk("    ISA interrupts routed to %s\n"
-		 "      lines",
-		 tmpstr);
-	  for(i=0; i<16; i++) {
-	  	int line=ld_le16((unsigned short *)p.PPCData+i+1);
-		if (line!=0xffff) printk(" %d(IRQ%d)", line, i);
-	  }
-	  printk("\n");
-	  break;
-	default:
-	  printk("    Large vendor item type 0x%2.2x\n      Data (hex):",
-		 p.Type);
-	  for(i=0; i<size-4; i++) printk(" %2.2x", p.PPCData[i]);
-	  printk("\n");
-#undef p
-	}
-}
-
-static void __init printlargepacket(PnP_TAG_PACKET * pkt, int size) {
-	switch (tag_large_item_name(pkt->S1_Pack.Tag)) {
-	case LargeVendorItem:
-	  printlargevendor(pkt, size);
-	  break;
-	default:
-	  printk("    Type 0x2.2x%d, size=%d\n",
-		 pkt->S1_Pack.Tag, size);
-	  break;
-	}
-}
-
-static void __init printpackets(PnP_TAG_PACKET * pkt, const char * cat)
-{
-	if (pkt->S1_Pack.Tag== END_TAG) {
-		printk("  No packets describing %s resources.\n", cat);
-		return;
-	}
-	printk(  "  Packets describing %s resources:\n",cat);
-	do {
-		int size;
-		if (tag_type(pkt->S1_Pack.Tag)) {
-		  	size= 3 +
-			  pkt->L1_Pack.Count0 +
-			  pkt->L1_Pack.Count1*256;
-			printlargepacket(pkt, size);
-		} else {
-			size=tag_small_count(pkt->S1_Pack.Tag)+1;
-			printsmallpacket(pkt, size);
-		}
-		pkt = (PnP_TAG_PACKET *)((unsigned char *) pkt + size);
-	} while (pkt->S1_Pack.Tag != END_TAG);
-}
-
-void __init print_residual_device_info(void)
-{
-	int i;
-	PPC_DEVICE *dev;
-#define did dev->DeviceId
-
-	/* make sure we have residual data first */
-	if (!have_residual_data)
-		return;
-
-	printk("Residual: %ld devices\n", res->ActualNumDevices);
-	for ( i = 0;
-	      i < res->ActualNumDevices ;
-	      i++)
-	{
-	  	char decomp[4], sn[20];
-		const char * s;
-		dev = &res->Devices[i];
-		s = PnP_INTERFACE_STR(did.BaseType, did.SubType,
-				      did.Interface);
-		if(!s) {
-			sprintf(sn, "interface %d", did.Interface);
-			s=sn;
-		}
-		if ( did.BusId & PCIDEVICE )
-		  printk("PCI Device, Bus %d, DevFunc 0x%x:",
-			 dev->BusAccess.PCIAccess.BusNumber,
-			 dev->BusAccess.PCIAccess.DevFuncNumber);
-	       	if ( did.BusId & PNPISADEVICE ) printk("PNPISA Device:");
-		if ( did.BusId & ISADEVICE )
-		  printk("ISA Device, Slot %d, LogicalDev %d:",
-			 dev->BusAccess.ISAAccess.SlotNumber,
-			 dev->BusAccess.ISAAccess.LogicalDevNumber);
-		if ( did.BusId & EISADEVICE ) printk("EISA Device:");
-		if ( did.BusId & PROCESSORDEVICE )
-		  printk("ProcBus Device, Bus %d, BUID %d: ",
-			 dev->BusAccess.ProcBusAccess.BusNumber,
-			 dev->BusAccess.ProcBusAccess.BUID);
-		if ( did.BusId & PCMCIADEVICE ) printk("PCMCIA ");
-		if ( did.BusId & VMEDEVICE ) printk("VME ");
-		if ( did.BusId & MCADEVICE ) printk("MCA ");
-		if ( did.BusId & MXDEVICE ) printk("MX ");
-		/* Decompress first 3 chars */
-		decomp[0]='A'-1+((did.DevId>>26)&0x1F);
-		decomp[1]='A'-1+((did.DevId>>21)&0x1F);
-		decomp[2]='A'-1+((did.DevId>>16)&0x1F);
-		decomp[3]=0;
-		printk(" %s%4.4lX, %s, %s, %s\n",
-		       decomp, did.DevId&0xffff,
-		       PnP_BASE_TYPES[did.BaseType],
-		       PnP_SUB_TYPE_STR(did.BaseType,did.SubType),
-		       s);
-		if ( dev->AllocatedOffset )
-			printpackets( (union _PnP_TAG_PACKET *)
-				      &res->DevicePnPHeap[dev->AllocatedOffset],
-				      "allocated");
-		if ( dev->PossibleOffset )
-			printpackets( (union _PnP_TAG_PACKET *)
-				      &res->DevicePnPHeap[dev->PossibleOffset],
-				      "possible");
-		if ( dev->CompatibleOffset )
-			printpackets( (union _PnP_TAG_PACKET *)
-				      &res->DevicePnPHeap[dev->CompatibleOffset],
-				      "compatible");
-	}
-}
-
-
-#if 0
-static void __init printVPD(void) {
-#define vpd res->VitalProductData
-	int ps=vpd.PageSize, i, j;
-	static const char* Usage[]={
-	  "FirmwareStack",  "FirmwareHeap",  "FirmwareCode", "BootImage",
-	  "Free", "Unpopulated", "ISAAddr", "PCIConfig",
-	  "IOMemory", "SystemIO", "SystemRegs", "PCIAddr",
-	  "UnPopSystemRom", "SystemROM", "ResumeBlock", "Other"
-	};
-	static const unsigned char *FWMan[]={
-	  "IBM", "Motorola", "FirmWorks", "Bull"
-	};
-	static const unsigned char *FWFlags[]={
-	  "Conventional", "OpenFirmware", "Diagnostics", "LowDebug",
-	  "MultiBoot", "LowClient", "Hex41", "FAT",
-	  "ISO9660", "SCSI_ID_Override", "Tape_Boot", "FW_Boot_Path"
-	};
-	static const unsigned char *ESM[]={
-	  "Port92", "PCIConfigA8", "FF001030", "????????"
-	};
-	static const unsigned char *SIOM[]={
-	  "Port850", "????????", "PCIConfigA8", "????????"
-	};
-
-	printk("Model: %s\n",vpd.PrintableModel);
-	printk("Serial: %s\n", vpd.Serial);
-	printk("FirmwareSupplier: %s\n", FWMan[vpd.FirmwareSupplier]);
-	printk("FirmwareFlags:");
-	for(j=0; j<12; j++) {
-	  	if (vpd.FirmwareSupports & (1<<j)) {
-			printk(" %s%c", FWFlags[j],
-			       vpd.FirmwareSupports&(-2<<j) ? ',' : '\n');
-		}
-	}
-	printk("NVRamSize: %ld\n", vpd.NvramSize);
-	printk("SIMMslots: %ld\n", vpd.NumSIMMSlots);
-	printk("EndianSwitchMethod: %s\n",
-	       ESM[vpd.EndianSwitchMethod>2 ? 2 : vpd.EndianSwitchMethod]);
-	printk("SpreadIOMethod: %s\n",
-	       SIOM[vpd.SpreadIOMethod>3 ? 3 : vpd.SpreadIOMethod]);
-	printk("Processor/Bus frequencies (Hz): %ld/%ld\n",
-	       vpd.ProcessorHz, vpd.ProcessorBusHz);
-	printk("Time Base Divisor: %ld\n", vpd.TimeBaseDivisor);
-	printk("WordWidth, PageSize: %ld, %d\n", vpd.WordWidth, ps);
-	printk("Cache sector size, Lock granularity: %ld, %ld\n",
-	       vpd.CoherenceBlockSize, vpd.GranuleSize);
-	for (i=0; i<res->ActualNumMemSegs; i++) {
-		int mask=res->Segs[i].Usage, first, j;
-		printk("%8.8lx-%8.8lx ",
-		       res->Segs[i].BasePage*ps,
-		       (res->Segs[i].PageCount+res->Segs[i].BasePage)*ps-1);
-		for(j=15, first=1; j>=0; j--) {
-			if (mask&(1<<j)) {
-				if (first) first=0;
-				else printk(", ");
-				printk("%s", Usage[j]);
-			}
-		}
-		printk("\n");
-	}
-}
-
-/*
- * Spit out some info about residual data
- */
-void print_residual_device_info(void)
-{
-	int i;
-	union _PnP_TAG_PACKET *pkt;
-	PPC_DEVICE *dev;
-#define did dev->DeviceId
-
-	/* make sure we have residual data first */
-	if (!have_residual_data)
-		return;
-	printk("Residual: %ld devices\n", res->ActualNumDevices);
-	for ( i = 0;
-	      i < res->ActualNumDevices ;
-	      i++)
-	{
-		dev = &res->Devices[i];
-		/*
-		 * pci devices
-		 */
-		if ( did.BusId & PCIDEVICE )
-		{
-			printk("PCI Device:");
-			/* unknown vendor */
-			if ( !strncmp( "Unknown", pci_strvendor(did.DevId>>16), 7) )
-				printk(" id %08lx types %d/%d", did.DevId,
-				       did.BaseType, did.SubType);
-			/* known vendor */
-			else
-				printk(" %s %s",
-				       pci_strvendor(did.DevId>>16),
-				       pci_strdev(did.DevId>>16,
-						  did.DevId&0xffff)
-					);
-
-			if ( did.BusId & PNPISADEVICE )
-			{
-				printk(" pnp:");
-				/* get pnp info on the device */
-				pkt = (union _PnP_TAG_PACKET *)
-					&res->DevicePnPHeap[dev->AllocatedOffset];
-				for (; pkt->S1_Pack.Tag != DF_END_TAG;
-				     pkt++ )
-				{
-					if ( (pkt->S1_Pack.Tag == S4_Packet) ||
-					     (pkt->S1_Pack.Tag == S4_Packet_flags) )
-						printk(" irq %02x%02x",
-						       pkt->S4_Pack.IRQMask[0],
-						       pkt->S4_Pack.IRQMask[1]);
-				}
-			}
-			printk("\n");
-			continue;
-		}
-		/*
-		 * isa devices
-		 */
-		if ( did.BusId & ISADEVICE )
-		{
-			printk("ISA Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		/*
-		 * eisa devices
-		 */
-		if ( did.BusId & EISADEVICE )
-		{
-			printk("EISA Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		/*
-		 * proc bus devices
-		 */
-		if ( did.BusId & PROCESSORDEVICE )
-		{
-			printk("ProcBus Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		/*
-		 * pcmcia devices
-		 */
-		if ( did.BusId & PCMCIADEVICE )
-		{
-			printk("PCMCIA Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		printk("Unknown bus access device: busid %lx\n",
-		       did.BusId);
-	}
-}
-#endif
-
-/* Returns the device index in the residual data,
-   any of the search items may be set as -1 for wildcard,
-   DevID number field (second halfword) is big endian !
-
-   Examples:
-   - search for the Interrupt controller (8259 type), 2 methods:
-     1) i8259 = residual_find_device(~0,
-                                     NULL,
-				     SystemPeripheral,
-				     ProgrammableInterruptController,
-				     ISA_PIC,
-				     0);
-     2) i8259 = residual_find_device(~0, "PNP0000", -1, -1, -1, 0)
-
-   - search for the first two serial devices, whatever their type)
-     iserial1 = residual_find_device(~0,NULL,
-                                     CommunicationsDevice,
-				     RS232Device,
-				     -1, 0)
-     iserial2 = residual_find_device(~0,NULL,
-                                     CommunicationsDevice,
-				     RS232Device,
-				     -1, 1)
-   - but search for typical COM1 and COM2 is not easy due to the
-     fact that the interface may be anything and the name "PNP0500" or
-     "PNP0501". Quite bad.
-
-*/
-
-/* devid are easier to uncompress than to compress, so to minimize bloat
-in this rarely used area we unencode and compare */
-
-/* in residual data number is big endian in the device table and
-little endian in the heap, so we use two parameters to avoid writing
-two very similar functions */
-
-static int __init same_DevID(unsigned short vendor,
-	       unsigned short Number,
-	       char * str)
-{
-	static unsigned const char hexdigit[]="0123456789ABCDEF";
-	if (strlen(str)!=7) return 0;
-	if ( ( ((vendor>>10)&0x1f)+'A'-1 == str[0])  &&
-	     ( ((vendor>>5)&0x1f)+'A'-1 == str[1])   &&
-	     ( (vendor&0x1f)+'A'-1 == str[2])        &&
-	     (hexdigit[(Number>>12)&0x0f] == str[3]) &&
-	     (hexdigit[(Number>>8)&0x0f] == str[4])  &&
-	     (hexdigit[(Number>>4)&0x0f] == str[5])  &&
-	     (hexdigit[Number&0x0f] == str[6]) ) return 1;
-	return 0;
-}
-
-PPC_DEVICE __init *residual_find_device(unsigned long BusMask,
-			 unsigned char * DevID,
-			 int BaseType,
-			 int SubType,
-			 int Interface,
-			 int n)
-{
-	int i;
-	if (!have_residual_data) return NULL;
-	for (i=0; i<res->ActualNumDevices; i++) {
-#define Dev res->Devices[i].DeviceId
-		if ( (Dev.BusId&BusMask)                                  &&
-		     (BaseType==-1 || Dev.BaseType==BaseType)             &&
-		     (SubType==-1 || Dev.SubType==SubType)                &&
-		     (Interface==-1 || Dev.Interface==Interface)          &&
-		     (DevID==NULL || same_DevID((Dev.DevId>>16)&0xffff,
-						Dev.DevId&0xffff, DevID)) &&
-		     !(n--) ) return res->Devices+i;
-#undef Dev
-	}
-	return NULL;
-}
-
-PPC_DEVICE __init *residual_find_device_id(unsigned long BusMask,
-			 unsigned short DevID,
-			 int BaseType,
-			 int SubType,
-			 int Interface,
-			 int n)
-{
-	int i;
-	if (!have_residual_data) return NULL;
-	for (i=0; i<res->ActualNumDevices; i++) {
-#define Dev res->Devices[i].DeviceId
-		if ( (Dev.BusId&BusMask)                                  &&
-		     (BaseType==-1 || Dev.BaseType==BaseType)             &&
-		     (SubType==-1 || Dev.SubType==SubType)                &&
-		     (Interface==-1 || Dev.Interface==Interface)          &&
-		     (DevID==0xffff || (Dev.DevId&0xffff) == DevID)	  &&
-		     !(n--) ) return res->Devices+i;
-#undef Dev
-	}
-	return NULL;
-}
-
-static int __init
-residual_scan_pcibridge(PnP_TAG_PACKET * pkt, struct pci_dev *dev)
-{
-	int irq = -1;
-
-#define data pkt->L4_Pack.L4_Data.L4_PPCPack.PPCData
-	if (dev->bus->number == data[16]) {
-		int i, size;
-
-		size = 3 + ld_le16((u_short *) (&pkt->L4_Pack.Count0));
-		for (i = 20; i < size - 4; i += 12) {
-			unsigned char pin;
-			int line_irq;
-
-			if (dev->devfn != data[i + 1])
-				continue;
-
-			pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-			if (pin) {
-				line_irq = ld_le16((unsigned short *)
-						(&data[i + 4 + 2 * (pin - 1)]));
-				irq = (line_irq == 0xffff) ? 0
-							   : line_irq & 0x7fff;
-			} else
-				irq = 0;
-
-			break;
-		}
-	}
-#undef data
-
-	return irq;
-}
-
-int __init
-residual_pcidev_irq(struct pci_dev *dev)
-{
-	int i = 0;
-	int irq = -1;
-	PPC_DEVICE *bridge;
-
-	while ((bridge = residual_find_device
-	       (-1, NULL, BridgeController, PCIBridge, -1, i++))) {
-
-		PnP_TAG_PACKET *pkt;
-		if (bridge->AllocatedOffset) {
-			pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap +
-					   bridge->AllocatedOffset, 3, 0);
-			if (!pkt)
-				continue;
-
-			irq = residual_scan_pcibridge(pkt, dev);
-			if (irq != -1)
-				break;
-		}
-	}
-
-	return (irq < 0) ? 0 : irq;
-}
-
-void __init residual_irq_mask(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	PPC_DEVICE *dev;
-	int i = 0;
-	unsigned short irq_mask = 0x000; /* default to edge */
-
-	while ((dev = residual_find_device(-1, NULL, -1, -1, -1, i++))) {
-		PnP_TAG_PACKET *pkt;
-		unsigned short mask;
-		int size;
-		int offset = dev->AllocatedOffset;
-
-		if (!offset)
-			continue;
-
-		pkt = PnP_find_packet(res->DevicePnPHeap + offset,
-					      IRQFormat, 0);
-		if (!pkt)
-			continue;
-
-		size = tag_small_count(pkt->S1_Pack.Tag) + 1;
-		mask = ld_le16((unsigned short *)pkt->S4_Pack.IRQMask);
-		if (size > 3 && (pkt->S4_Pack.IRQInfo & 0x0c))
-			irq_mask |= mask;
-	}
-
-	*irq_edge_mask_lo = irq_mask & 0xff;
-	*irq_edge_mask_hi = irq_mask >> 8;
-}
-
-unsigned int __init residual_isapic_addr(void)
-{
-	PPC_DEVICE *isapic;
-	PnP_TAG_PACKET *pkt;
-	unsigned int addr;
-
-	isapic = residual_find_device(~0, NULL, SystemPeripheral,
-				      ProgrammableInterruptController,
-				      ISA_PIC, 0);
-	if (!isapic)
-		goto unknown;
-
-	pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap +
-						isapic->AllocatedOffset, 9, 0);
-	if (!pkt)
-		goto unknown;
-
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-	/* Must be 32-bit system address */
-	if (!((p.PPCData[0] == 3) && (p.PPCData[1] == 32)))
-		goto unknown;
-
-	/* It doesn't seem to work where length != 1 (what can I say? :-/ ) */
-	if (ld_le32((unsigned int *)(p.PPCData + 12)) != 1)
-		goto unknown;
-
-	addr = ld_le32((unsigned int *) (p.PPCData + 4));
-#undef p
-	return addr;
-unknown:
-	return 0;
-}
-
-PnP_TAG_PACKET *PnP_find_packet(unsigned char *p,
-				unsigned packet_tag,
-				int n)
-{
-	unsigned mask, masked_tag, size;
-	if(!p) return NULL;
-	if (tag_type(packet_tag)) mask=0xff; else mask=0xF8;
-	masked_tag = packet_tag&mask;
-	for(; *p != END_TAG; p+=size) {
-		if ((*p & mask) == masked_tag && !(n--))
-			return (PnP_TAG_PACKET *) p;
-		if (tag_type(*p))
-			size=ld_le16((unsigned short *)(p+1))+3;
-		else
-			size=tag_small_count(*p)+1;
-	}
-	return NULL; /* not found */
-}
-
-PnP_TAG_PACKET __init *PnP_find_small_vendor_packet(unsigned char *p,
-					     unsigned packet_type,
-					     int n)
-{
-	int next=0;
-	while (p) {
-		p = (unsigned char *) PnP_find_packet(p, 0x70, next);
-		if (p && p[1]==packet_type && !(n--))
-			return (PnP_TAG_PACKET *) p;
-		next = 1;
-	};
-	return NULL; /* not found */
-}
-
-PnP_TAG_PACKET __init *PnP_find_large_vendor_packet(unsigned char *p,
-					   unsigned packet_type,
-					   int n)
-{
-	int next=0;
-	while (p) {
-		p = (unsigned char *) PnP_find_packet(p, 0x84, next);
-		if (p && p[3]==packet_type && !(n--))
-			return (PnP_TAG_PACKET *) p;
-		next = 1;
-	};
-	return NULL; /* not found */
-}
-
-#ifdef CONFIG_PROC_PREPRESIDUAL
-static int proc_prep_residual_read(char * buf, char ** start, off_t off,
-		int count, int *eof, void *data)
-{
-	int n;
-
-	n = res->ResidualLength - off;
-	if (n < 0) {
-		*eof = 1;
-		n = 0;
-	}
-	else {
-		if (n > count)
-			n = count;
-		else
-			*eof = 1;
-
-		memcpy(buf, (char *)res + off, n);
-		*start = buf;
-	}
-
-	return n;
-}
-
-int __init
-proc_prep_residual_init(void)
-{
-	if (have_residual_data)
-		create_proc_read_entry("residual", S_IRUGO, NULL,
-					proc_prep_residual_read, NULL);
-	return 0;
-}
-
-__initcall(proc_prep_residual_init);
-#endif
diff --git a/arch/ppc/platforms/rpx8260.h b/arch/ppc/platforms/rpx8260.h
deleted file mode 100644
index 843494a50ef3..000000000000
--- a/arch/ppc/platforms/rpx8260.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Embedded Planet RPX6 (or RPX Super) MPC8260 board.
- * Copied from the RPX-Classic and SBS8260 stuff.
- *
- * Copyright (c) 2001 Dan Malek <dan@embeddededge.com>
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PLATFORMS_RPX8260_H__
-#define __ASM_PLATFORMS_RPX8260_H__
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_nvsize;	/* NVRAM size in bytes (can be 0) */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_cpmfreq;	/* CPM Freq, in MHz */
-	unsigned int	bi_brgfreq;	/* BRG Freq, in MHz */
-	unsigned int	bi_vco;		/* VCO Out from PLL */
-	unsigned int	bi_baudrate;	/* Default console baud rate */
-	unsigned int	bi_immr;	/* IMMR when called from boot rom */
-	unsigned char	bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define CPM_MAP_ADDR		((uint)0xf0000000)
-#define RPX_CSR_ADDR		((uint)0xfa000000)
-#define RPX_CSR_SIZE		((uint)(512 * 1024))
-#define RPX_NVRTC_ADDR		((uint)0xfa080000)
-#define RPX_NVRTC_SIZE		((uint)(512 * 1024))
-
-/* The RPX6 has 16, byte wide control/status registers.
- * Not all are used (yet).
- */
-extern volatile u_char *rpx6_csr_addr;
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ID_MASK		((u_char)0xf0)		/* Read only */
-#define BCSR0_SWITCH_MASK	((u_char)0x0f)		/* Read only */
-#define BCSR1_XCVR_SMC1		((u_char)0x80)
-#define BCSR1_XCVR_SMC2		((u_char)0x40)
-#define BCSR2_FLASH_WENABLE	((u_char)0x20)
-#define BCSR2_NVRAM_ENABLE	((u_char)0x10)
-#define BCSR2_ALT_IRQ2		((u_char)0x08)
-#define BCSR2_ALT_IRQ3		((u_char)0x04)
-#define BCSR2_PRST		((u_char)0x02)		/* Force reset */
-#define BCSR2_ENPRST		((u_char)0x01)		/* Enable POR */
-#define BCSR3_MODCLK_MASK	((u_char)0xe0)
-#define BCSR3_ENCLKHDR		((u_char)0x10)
-#define BCSR3_LED5		((u_char)0x04)		/* 0 == on */
-#define BCSR3_LED6		((u_char)0x02)		/* 0 == on */
-#define BCSR3_LED7		((u_char)0x01)		/* 0 == on */
-#define BCSR4_EN_PHY		((u_char)0x80)		/* Enable PHY */
-#define BCSR4_EN_MII		((u_char)0x40)		/* Enable PHY */
-#define BCSR4_MII_READ		((u_char)0x04)
-#define BCSR4_MII_MDC		((u_char)0x02)
-#define BCSR4_MII_MDIO		((u_char)0x01)
-#define BCSR13_FETH_IRQMASK	((u_char)0xf0)
-#define BCSR15_FETH_IRQ		((u_char)0x20)
-
-#define PHY_INTERRUPT	SIU_INT_IRQ7
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"Embedded Planet"
-#define CPUINFO_MACHINE		"EP8260 PowerPC"
-
-/* Warm reset vector. */
-#define BOOTROM_RESTART_ADDR	((uint)0xfff00104)
-
-#endif /* __ASM_PLATFORMS_RPX8260_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/rpxclassic.h b/arch/ppc/platforms/rpxclassic.h
deleted file mode 100644
index a3c1118e5b09..000000000000
--- a/arch/ppc/platforms/rpxclassic.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the RPCG RPX-Classic board.  Copied from the RPX-Lite stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_RPX_DEFS
-#define __MACH_RPX_DEFS
-
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define PCI_ISA_IO_ADDR		((unsigned)0x80000000)
-#define PCI_ISA_IO_SIZE		((uint)(512 * 1024 * 1024))
-#define PCI_ISA_MEM_ADDR	((unsigned)0xc0000000)
-#define PCI_ISA_MEM_SIZE	((uint)(512 * 1024 * 1024))
-#define RPX_CSR_ADDR		((uint)0xfa400000)
-#define RPX_CSR_SIZE		((uint)(4 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCI_CSR_ADDR		((uint)0x80000000)
-#define PCI_CSR_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0xe0000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0xe4000000)
-#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
-#define PCMCIA_ATTRB_ADDR	((uint)0xe8000000)
-#define PCMCIA_ATTRB_SIZE	((uint)(4 * 1024))
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ETHEN		((uint)0x80000000)
-#define BCSR0_ETHLPBK		((uint)0x40000000)
-#define BCSR0_COLTESTDIS	((uint)0x20000000)
-#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
-#define BCSR0_ENFLSHSEL		((uint)0x04000000)
-#define BCSR0_FLASH_SEL		((uint)0x02000000)
-#define BCSR0_ENMONXCVR		((uint)0x01000000)
-
-#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)	/* CLLF */
-#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)	/* CLLF */
-#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)	/* CLLF */
-
-#define BCSR1_IPB5SEL           ((uint)0x00100000)
-#define BCSR1_PCVCTL4           ((uint)0x00080000)
-#define BCSR1_PCVCTL5           ((uint)0x00040000)
-#define BCSR1_PCVCTL6           ((uint)0x00020000)
-#define BCSR1_PCVCTL7           ((uint)0x00010000)
-
-#define BCSR2_EN232XCVR		((uint)0x00008000)
-#define BCSR2_QSPACESEL		((uint)0x00004000)
-#define BCSR2_FETHLEDMODE	((uint)0x00000800)	/* CLLF */
-
-/* define IO_BASE for pcmcia, CLLF only */
-#if !defined(CONFIG_PCI)
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE 0x1000
-
-/* for pcmcia sandisk */
-#ifdef CONFIG_IDE
-# define MAX_HWIFS 1
-#endif
-#endif
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-
-/* CPM Ethernet through SCCx.
- *
- * Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-
-/* We don't use the 8259.
-*/
-
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_RPX_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/rpxlite.h b/arch/ppc/platforms/rpxlite.h
deleted file mode 100644
index b615501d55fc..000000000000
--- a/arch/ppc/platforms/rpxlite.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the RPCG RPX-Lite board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_RPX_DEFS
-#define __MACH_RPX_DEFS
-
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define RPX_CSR_ADDR		((uint)0xfa400000)
-#define RPX_CSR_SIZE		((uint)(4 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0x04000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0x04400000)
-#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ETHEN		((uint)0x80000000)
-#define BCSR0_ETHLPBK		((uint)0x40000000)
-#define BCSR0_COLTESTDIS	((uint)0x20000000)
-#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
-#define BCSR0_LEDOFF		((uint)0x08000000)
-#define BCSR0_USBDISABLE	((uint)0x04000000)
-#define BCSR0_USBHISPEED	((uint)0x02000000)
-#define BCSR0_USBPWREN		((uint)0x01000000)
-#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)
-#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)
-#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)
-
-#define BCSR1_IPB5SEL          ((uint)0x00100000)
-#define BCSR1_PCVCTL4          ((uint)0x00080000)
-#define BCSR1_PCVCTL5          ((uint)0x00040000)
-#define BCSR1_PCVCTL6          ((uint)0x00020000)
-#define BCSR1_PCVCTL7          ((uint)0x00010000)
-
-/* define IO_BASE for pcmcia */
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE 0x1000
-
-#ifdef CONFIG_IDE
-# define MAX_HWIFS 1
-#endif
-
-/* CPM Ethernet through SCCx.
- *
- * This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00003d00)
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_RPX_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
deleted file mode 100644
index b4897bdb742a..000000000000
--- a/arch/ppc/platforms/sandpoint.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/*
- * Board setup routines for the Motorola SPS Sandpoint Test Platform.
- *
- * Author: Mark A. Greer
- *	 mgreer@mvista.com
- *
- * 2000-2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file adds support for the Motorola SPS Sandpoint Test Platform.
- * These boards have a PPMC slot for the processor so any combination
- * of cpu and host bridge can be attached.  This port is for an 8240 PPMC
- * module from Motorola SPS and other closely related cpu/host bridge
- * combinations (e.g., 750/755/7400 with MPC107 host bridge).
- * The sandpoint itself has a Windbond 83c553 (PCI-ISA bridge, 2 DMA ctlrs, 2
- * cascaded 8259 interrupt ctlrs, 8254 Timer/Counter, and an IDE ctlr), a
- * National 87308 (RTC, 2 UARTs, Keyboard & mouse ctlrs, and a floppy ctlr),
- * and 4 PCI slots (only 2 of which are usable; the other 2 are keyed for 3.3V
- * but are really 5V).
- *
- * The firmware on the sandpoint is called DINK (not my acronym :).  This port
- * depends on DINK to do some basic initialization (e.g., initialize the memory
- * ctlr) and to ensure that the processor is using MAP B (CHRP map).
- *
- * The switch settings for the Sandpoint board MUST be as follows:
- * 	S3: down
- * 	S4: up
- * 	S5: up
- * 	S6: down
- *
- * 'down' is in the direction from the PCI slots towards the PPMC slot;
- * 'up' is in the direction from the PPMC slot towards the PCI slots.
- * Be careful, the way the sandpoint board is installed in XT chasses will
- * make the directions reversed.
- *
- * Since Motorola listened to our suggestions for improvement, we now have
- * the Sandpoint X3 board.  All of the PCI slots are available, it uses
- * the serial interrupt interface (just a hardware thing we need to
- * configure properly).
- *
- * Use the default X3 switch settings.  The interrupts are then:
- *		EPIC	Source
- *		  0	SIOINT 		(8259, active low)
- *		  1	PCI #1
- *		  2	PCI #2
- *		  3	PCI #3
- *		  4	PCI #4
- *		  7	Winbond INTC	(IDE interrupt)
- *		  8	Winbond INTD	(IDE interrupt)
- *
- *
- * Motorola has finally released a version of DINK32 that correctly
- * (seemingly) initializes the memory controller correctly, regardless
- * of the amount of memory in the system.  Once a method of determining
- * what version of DINK initializes the system for us, if applicable, is
- * found, we can hopefully stop hardcoding 32MB of RAM.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>	/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/vga.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/pci-bridge.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-
-#include "sandpoint.h"
-
-/* Set non-zero if an X2 Sandpoint detected. */
-static int sandpoint_is_x2;
-
-unsigned char __res[sizeof(bd_t)];
-
-static void sandpoint_halt(void);
-static void sandpoint_probe_type(void);
-
-/*
- * Define all of the IRQ senses and polarities.  Taken from the
- * Sandpoint X3 User's manual.
- */
-static u_char sandpoint_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 0: SIOINT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 2: PCI Slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 3: PCI Slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 4: PCI Slot 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 5: PCI Slot 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 8: IDE (INT C) */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE)	/* 9: IDE (INT D) */
-};
-
-/*
- * Motorola SPS Sandpoint interrupt routing.
- */
-static inline int
-x3_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 16,  0,  0,  0 },	/* IDSEL 11 - i8259 on Winbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 18, 21, 20, 19 },	/* IDSEL 13 - PCI slot 1 */
-		{ 19, 18, 21, 20 },	/* IDSEL 14 - PCI slot 2 */
-		{ 20, 19, 18, 21 },	/* IDSEL 15 - PCI slot 3 */
-		{ 21, 20, 19, 18 },	/* IDSEL 16 - PCI slot 4 */
-	};
-
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static inline int
-x2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 18,  0,  0,  0 },	/* IDSEL 11 - i8259 on Windbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 16, 17, 18, 19 },	/* IDSEL 13 - PCI slot 1 */
-		{ 17, 18, 19, 16 },	/* IDSEL 14 - PCI slot 2 */
-		{ 18, 19, 16, 17 },	/* IDSEL 15 - PCI slot 3 */
-		{ 19, 16, 17, 18 },	/* IDSEL 16 - PCI slot 4 */
-	};
-
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init
-sandpoint_setup_winbond_83553(struct pci_controller *hose)
-{
-	int		devfn;
-
-	/*
-	 * Route IDE interrupts directly to the 8259's IRQ 14 & 15.
-	 * We can't route the IDE interrupt to PCI INTC# or INTD# because those
-	 * woule interfere with the PMC's INTC# and INTD# lines.
-	 */
-	/*
-	 * Winbond Fcn 0
-	 */
-	devfn = PCI_DEVFN(11,0);
-
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x43, /* IDE Interrupt Routing Control */
-				0xef);
-	early_write_config_word(hose,
-				0,
-				devfn,
-				0x44, /* PCI Interrupt Routing Control */
-				0x0000);
-
-	/* Want ISA memory cycles to be forwarded to PCI bus */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x48, /* ISA-to-PCI Addr Decoder Control */
-				0xf0);
-
-	/* Enable Port 92.  */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x4e,	/* AT System Control Register */
-				0x06);
-	/*
-	 * Winbond Fcn 1
-	 */
-	devfn = PCI_DEVFN(11,1);
-
-	/* Put IDE controller into native mode. */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x09,	/* Programming interface Register */
-				0x8f);
-
-	/* Init IRQ routing, enable both ports, disable fast 16 */
-	early_write_config_dword(hose,
-				0,
-				devfn,
-				0x40,	/* IDE Control/Status Register */
-				0x00ff0011);
-	return;
-}
-
-/* On the sandpoint X2, we must avoid sending configuration cycles to
- * device #12 (IDSEL addr = AD12).
- */
-static int
-x2_exclude_device(u_char bus, u_char devfn)
-{
-	if ((bus == 0) && (PCI_SLOT(devfn) == SANDPOINT_HOST_BRIDGE_IDSEL))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-
-static void __init
-sandpoint_find_bridges(void)
-{
-	struct pci_controller	*hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose,
-			       MPC10X_MEM_MAP_B,
-			       MPC10X_MEM_MAP_B,
-			       MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		/* Do early winbond init, then scan PCI bus */
-		sandpoint_setup_winbond_83553(hose);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-		ppc_md.pcibios_fixup = NULL;
-		ppc_md.pcibios_fixup_bus = NULL;
-		ppc_md.pci_swizzle = common_swizzle;
-		if (sandpoint_is_x2) {
-			ppc_md.pci_map_irq = x2_map_irq;
-			ppc_md.pci_exclude_device = x2_exclude_device;
-		} else
-			ppc_md.pci_map_irq = x3_map_irq;
-	}
-	else {
-		if (ppc_md.progress)
-			ppc_md.progress("Bridge init failed", 0x100);
-		printk("Host bridge init failed\n");
-	}
-
-	return;
-}
-
-static void __init
-sandpoint_setup_arch(void)
-{
-	/* Probe for Sandpoint model */
-	sandpoint_probe_type();
-	if (sandpoint_is_x2)
-		epic_serial_mode = 0;
-
-	loops_per_jiffy = 100000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	/* Lookup PCI host bridges */
-	sandpoint_find_bridges();
-
-	if (strncmp (cur_ppc_sys_spec->ppc_sys_name, "8245", 4) == 0)
-	{
-		bd_t *bp = (bd_t *)__res;
-		struct plat_serial8250_port *pdata;
-
-		pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART0);
-		if (pdata)
-		{
-			pdata[0].uartclk = bp->bi_busfreq;
-		}
-
-#ifdef CONFIG_SANDPOINT_ENABLE_UART1
-		pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART1);
-		if (pdata)
-		{
-			pdata[0].uartclk = bp->bi_busfreq;
-		}
-#else
-		ppc_sys_device_remove(MPC10X_UART1);
-#endif
-	}
-
-	printk(KERN_INFO "Motorola SPS Sandpoint Test Platform\n");
-	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-	/* DINK32 12.3 and below do not correctly enable any caches.
-	 * We will do this now with good known values.  Future versions
-	 * of DINK32 are supposed to get this correct.
-	 */
-	if (cpu_has_feature(CPU_FTR_SPEC7450))
-		/* 745x is different.  We only want to pass along enable. */
-		_set_L2CR(L2CR_L2E);
-	else if (cpu_has_feature(CPU_FTR_L2CR))
-		/* All modules have 1MB of L2.  We also assume that an
-		 * L2 divisor of 3 will work.
-		 */
-		_set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
-				| L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
-#if 0
-	/* Untested right now. */
-	if (cpu_has_feature(CPU_FTR_L3CR)) {
-		/* Magic value. */
-		_set_L3CR(0x8f032000);
-	}
-#endif
-}
-
-#define	SANDPOINT_87308_CFG_ADDR		0x15c
-#define	SANDPOINT_87308_CFG_DATA		0x15d
-
-#define	SANDPOINT_87308_CFG_INB(addr, byte) {				\
-	outb((addr), SANDPOINT_87308_CFG_ADDR);				\
-	(byte) = inb(SANDPOINT_87308_CFG_DATA);				\
-}
-
-#define	SANDPOINT_87308_CFG_OUTB(addr, byte) {				\
-	outb((addr), SANDPOINT_87308_CFG_ADDR);				\
-	outb((byte), SANDPOINT_87308_CFG_DATA);				\
-}
-
-#define SANDPOINT_87308_SELECT_DEV(dev_num) {				\
-	SANDPOINT_87308_CFG_OUTB(0x07, (dev_num));			\
-}
-
-#define	SANDPOINT_87308_DEV_ENABLE(dev_num) {				\
-	SANDPOINT_87308_SELECT_DEV(dev_num);				\
-	SANDPOINT_87308_CFG_OUTB(0x30, 0x01);				\
-}
-
-/*
- * To probe the Sandpoint type, we need to check for a connection between GPIO
- * pins 6 and 7 on the NS87308 SuperIO.
- */
-static void __init sandpoint_probe_type(void)
-{
-	u8 x;
-	/* First, ensure that the GPIO pins are enabled. */
-	SANDPOINT_87308_SELECT_DEV(0x07); /* Select GPIO logical device */
-	SANDPOINT_87308_CFG_OUTB(0x60, 0x07); /* Base address 0x700 */
-	SANDPOINT_87308_CFG_OUTB(0x61, 0x00);
-	SANDPOINT_87308_CFG_OUTB(0x30, 0x01); /* Enable */
-
-	/* Now, set pin 7 to output and pin 6 to input. */
-	outb((inb(0x701) | 0x80) & 0xbf, 0x701);
-	/* Set push-pull output */
-	outb(inb(0x702) | 0x80, 0x702);
-	/* Set pull-up on input */
-	outb(inb(0x703) | 0x40, 0x703);
-	/* Set output high and check */
-	x = inb(0x700);
-	outb(x | 0x80, 0x700);
-	x = inb(0x700);
-	sandpoint_is_x2 = ! (x & 0x40);
-	if (ppc_md.progress && sandpoint_is_x2)
-		ppc_md.progress("High output says X2", 0);
-	/* Set output low and check */
-	outb(x & 0x7f, 0x700);
-	sandpoint_is_x2 |= inb(0x700) & 0x40;
-	if (ppc_md.progress && sandpoint_is_x2)
-		ppc_md.progress("Low output says X2", 0);
-	if (ppc_md.progress && ! sandpoint_is_x2)
-		ppc_md.progress("Sandpoint is X3", 0);
-}
-
-/*
- * Fix IDE interrupts.
- */
-static int __init
-sandpoint_fix_winbond_83553(void)
-{
-	/* Make some 8259 interrupt level sensitive */
-	outb(0xe0, 0x4d0);
-	outb(0xde, 0x4d1);
-
-	return 0;
-}
-
-arch_initcall(sandpoint_fix_winbond_83553);
-
-/*
- * Initialize the ISA devices on the Nat'l PC87308VUL SuperIO chip.
- */
-static int __init
-sandpoint_setup_natl_87308(void)
-{
-	u_char	reg;
-
-	/*
-	 * Enable all the devices on the Super I/O chip.
-	 */
-	SANDPOINT_87308_SELECT_DEV(0x00); /* Select kbd logical device */
-	SANDPOINT_87308_CFG_OUTB(0xf0, 0x00); /* Set KBC clock to 8 Mhz */
-	SANDPOINT_87308_DEV_ENABLE(0x00); /* Enable keyboard */
-	SANDPOINT_87308_DEV_ENABLE(0x01); /* Enable mouse */
-	SANDPOINT_87308_DEV_ENABLE(0x02); /* Enable rtc */
-	SANDPOINT_87308_DEV_ENABLE(0x03); /* Enable fdc (floppy) */
-	SANDPOINT_87308_DEV_ENABLE(0x04); /* Enable parallel */
-	SANDPOINT_87308_DEV_ENABLE(0x05); /* Enable UART 2 */
-	SANDPOINT_87308_CFG_OUTB(0xf0, 0x82); /* Enable bank select regs */
-	SANDPOINT_87308_DEV_ENABLE(0x06); /* Enable UART 1 */
-	SANDPOINT_87308_CFG_OUTB(0xf0, 0x82); /* Enable bank select regs */
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	return 0;
-}
-
-arch_initcall(sandpoint_setup_natl_87308);
-
-static int __init
-sandpoint_request_io(void)
-{
-	request_region(0x00,0x20,"dma1");
-	request_region(0x20,0x20,"pic1");
-	request_region(0x40,0x20,"timer");
-	request_region(0x80,0x10,"dma page reg");
-	request_region(0xa0,0x20,"pic2");
-	request_region(0xc0,0x20,"dma2");
-
-	return 0;
-}
-
-arch_initcall(sandpoint_request_io);
-
-/*
- * Interrupt setup and service.  Interrupts on the Sandpoint come
- * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO).
- * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4,
- * IDE is on EPIC 7 and 8.
- */
-static void __init
-sandpoint_init_IRQ(void)
-{
-	int i;
-
-	OpenPIC_InitSenses = sandpoint_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(sandpoint_openpic_initsenses);
-
-	mpc10x_set_openpic();
-	openpic_hookup_cascade(sandpoint_is_x2 ? 17 : NUM_8259_INTERRUPTS, "82c59 cascade",
-			i8259_irq);
-
-	/*
-	 * The EPIC allows for a read in the range of 0xFEF00000 ->
-	 * 0xFEFFFFFF to generate a PCI interrupt-acknowledge transaction.
-	 */
-	i8259_init(0xfef00000, 0);
-}
-
-static unsigned long __init
-sandpoint_find_end_of_memory(void)
-{
-	bd_t *bp = (bd_t *)__res;
-
-	if (bp->bi_memsize)
-		return bp->bi_memsize;
-
-	/* DINK32 13.0 correctly initializes things, so iff you use
-	 * this you _should_ be able to change this instead of a
-	 * hardcoded value. */
-#if 0
-	return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
-#else
-	return 32*1024*1024;
-#endif
-}
-
-static void __init
-sandpoint_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-}
-
-static void
-sandpoint_restart(char *cmd)
-{
-	local_irq_disable();
-
-	/* Set exception prefix high - to the firmware */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* Reset system via Port 92 */
-	outb(0x00, 0x92);
-	outb(0x01, 0x92);
-	for(;;);	/* Spin until reset happens */
-}
-
-static void
-sandpoint_power_off(void)
-{
-	local_irq_disable();
-	for(;;);	/* No way to shut power off with software */
-	/* NOTREACHED */
-}
-
-static void
-sandpoint_halt(void)
-{
-	sandpoint_power_off();
-	/* NOTREACHED */
-}
-
-static int
-sandpoint_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola SPS\n");
-	seq_printf(m, "machine\t\t: Sandpoint\n");
-
-	return 0;
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-sandpoint_set_bat(void)
-{
-	unsigned long bat3u, bat3l;
-
-	__asm__ __volatile__(
-			" lis %0,0xf800\n	\
-			ori %1,%0,0x002a\n	\
-			ori %0,%0,0x0ffe\n	\
-			mtspr 0x21e,%0\n	\
-			mtspr 0x21f,%1\n	\
-			isync\n			\
-			sync "
-			: "=r" (bat3u), "=r" (bat3l));
-}
-
-TODC_ALLOC();
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		/* copy board info structure */
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-		/* copy command line */
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	/* Map in board regs, etc. */
-	sandpoint_set_bat();
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = sandpoint_setup_arch;
-	ppc_md.show_cpuinfo = sandpoint_show_cpuinfo;
-	ppc_md.init_IRQ = sandpoint_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = sandpoint_restart;
-	ppc_md.power_off = sandpoint_power_off;
-	ppc_md.halt = sandpoint_halt;
-
-	ppc_md.find_end_of_memory = sandpoint_find_end_of_memory;
-	ppc_md.setup_io_mappings = sandpoint_map_io;
-
-	TODC_INIT(TODC_TYPE_PC97307, 0x70, 0x00, 0x71, 8);
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_mc146818_read_val;
-	ppc_md.nvram_write_val = todc_mc146818_write_val;
-
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h
deleted file mode 100644
index ed83759e4044..000000000000
--- a/arch/ppc/platforms/sandpoint.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Definitions for Motorola SPS Sandpoint Test Platform
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2000-2003 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Sandpoint uses the CHRP map (Map B).
- */
-
-#ifndef __PPC_PLATFORMS_SANDPOINT_H
-#define __PPC_PLATFORMS_SANDPOINT_H
-
-#include <asm/ppcboot.h>
-
-#if 0
-/* The Sandpoint X3 allows the IDE interrupt to be directly connected
- * from the Windbond (PCI INTC or INTD) to the serial EPIC.  Someday
- * we should try this, but it was easier to use the existing 83c553
- * initialization than change it to route the different interrupts :-).
- *	-- Dan
- */
-#define SANDPOINT_IDE_INT0		23	/* EPIC 7 */
-#define SANDPOINT_IDE_INT1		24	/* EPIC 8 */
-#endif
-
-/*
- * The sandpoint boards have processor modules that either have an 8240 or
- * an MPC107 host bridge on them.  These bridges have an IDSEL line that allows
- * them to respond to PCI transactions as if they were a normal PCI devices.
- * However, the processor on the processor side of the bridge can not reach
- * out onto the PCI bus and then select the bridge or bad things will happen
- * (documented in the 8240 and 107 manuals).
- * Because of this, we always skip the bridge PCI device when accessing the
- * PCI bus.  The PCI slot that the bridge occupies is defined by the macro
- * below.
- */
-#define SANDPOINT_HOST_BRIDGE_IDSEL     12
-
-/*
- * Serial defines.
- */
-#define SANDPOINT_SERIAL_0		0xfe0003f8
-#define SANDPOINT_SERIAL_1		0xfe0002f8
-
-#define RS_TABLE_SIZE  2
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD			( 1843200 / 16 )
-#define UART_CLK			1843200
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, SANDPOINT_SERIAL_0, 4, STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (u8 *)SANDPOINT_SERIAL_0,			  \
-		io_type: SERIAL_IO_MEM },				  \
-        { 0, BASE_BAUD, SANDPOINT_SERIAL_1, 3, STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (u8 *)SANDPOINT_SERIAL_1,			  \
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif /* __PPC_PLATFORMS_SANDPOINT_H */
diff --git a/arch/ppc/platforms/sbc82xx.c b/arch/ppc/platforms/sbc82xx.c
deleted file mode 100644
index 24f6e0694ac1..000000000000
--- a/arch/ppc/platforms/sbc82xx.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * SBC82XX platform support
- *
- * Author: Guy Streeter <streeter@redhat.com>
- *
- * Derived from: est8260_setup.c by Allen Curtis, ONZ
- *
- * Copyright 2004 Red Hat, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/mpc8260.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/immap_cpm2.h>
-#include <asm/pci.h>
-
-static void (*callback_init_IRQ)(void);
-
-extern unsigned char __res[sizeof(bd_t)];
-
-#ifdef CONFIG_GEN_RTC
-TODC_ALLOC();
-
-/*
- * Timer init happens before mem_init but after paging init, so we cannot
- * directly use ioremap() at that time.
- * late_time_init() is call after paging init.
- */
-
-static void sbc82xx_time_init(void)
-{
-	volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
-
-	/* Set up CS11 for RTC chip */
-	mc->memc_br11=0;
-	mc->memc_or11=0xffff0836;
-	mc->memc_br11=SBC82xx_TODC_NVRAM_ADDR | 0x0801;
-
-	TODC_INIT(TODC_TYPE_MK48T59, 0, 0, SBC82xx_TODC_NVRAM_ADDR, 0);
-
-	todc_info->nvram_data =
-		(unsigned int)ioremap(todc_info->nvram_data, 0x2000);
-	BUG_ON(!todc_info->nvram_data);
-	ppc_md.get_rtc_time	= todc_get_rtc_time;
-	ppc_md.set_rtc_time	= todc_set_rtc_time;
-	ppc_md.nvram_read_val	= todc_direct_read_val;
-	ppc_md.nvram_write_val	= todc_direct_write_val;
-	todc_time_init();
-}
-#endif /* CONFIG_GEN_RTC */
-
-static volatile char *sbc82xx_i8259_map;
-static char sbc82xx_i8259_mask = 0xff;
-static DEFINE_SPINLOCK(sbc82xx_i8259_lock);
-
-static void sbc82xx_i8259_mask_and_ack_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	irq_nr -= NR_SIU_INTS;
-
-	spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
-	sbc82xx_i8259_mask |= 1 << irq_nr;
-	(void) sbc82xx_i8259_map[1];	/* Dummy read */
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
-	sbc82xx_i8259_map[0] = 0x20;	/* OCW2: Non-specific EOI */
-	spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
-}
-
-static void sbc82xx_i8259_mask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	irq_nr -= NR_SIU_INTS;
-
-	spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
-	sbc82xx_i8259_mask |= 1 << irq_nr;
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
-	spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
-}
-
-static void sbc82xx_i8259_unmask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	irq_nr -= NR_SIU_INTS;
-
-	spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
-	sbc82xx_i8259_mask &= ~(1 << irq_nr);
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
-	spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
-}
-
-static void sbc82xx_i8259_end_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-	    && irq_desc[irq].action)
-		sbc82xx_i8259_unmask_irq(irq);
-}
-
-
-struct hw_interrupt_type sbc82xx_i8259_ic = {
-	.typename = " i8259     ",
-	.enable = sbc82xx_i8259_unmask_irq,
-	.disable = sbc82xx_i8259_mask_irq,
-	.ack = sbc82xx_i8259_mask_and_ack_irq,
-	.end = sbc82xx_i8259_end_irq,
-};
-
-static irqreturn_t sbc82xx_i8259_demux(int dummy, void *dev_id)
-{
-	int irq;
-
-	spin_lock(&sbc82xx_i8259_lock);
-
-	sbc82xx_i8259_map[0] = 0x0c;	/* OCW3: Read IR register on RD# pulse */
-	irq = sbc82xx_i8259_map[0] & 7;	/* Read IRR */
-
-	if (irq == 7) {
-		/* Possible spurious interrupt */
-		int isr;
-		sbc82xx_i8259_map[0] = 0x0b;	/* OCW3: Read IS register on RD# pulse */
-		isr = sbc82xx_i8259_map[0];	/* Read ISR */
-
-		if (!(isr & 0x80)) {
-			printk(KERN_INFO "Spurious i8259 interrupt\n");
-			return IRQ_HANDLED;
-		}
-	}
-	__do_IRQ(NR_SIU_INTS + irq);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction sbc82xx_i8259_irqaction = {
-	.handler = sbc82xx_i8259_demux,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "i8259 demux",
-};
-
-void __init sbc82xx_init_IRQ(void)
-{
-	volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
-	volatile intctl_cpm2_t *ic = &cpm2_immr->im_intctl;
-	int i;
-
-	callback_init_IRQ();
-
-	/* u-boot doesn't always set the board up correctly */
-	mc->memc_br5 = 0;
-	mc->memc_or5 = 0xfff00856;
-	mc->memc_br5 = 0x22000801;
-
-	sbc82xx_i8259_map = ioremap(0x22008000, 2);
-	if (!sbc82xx_i8259_map) {
-		printk(KERN_CRIT "Mapping i8259 interrupt controller failed\n");
-		return;
-	}
-	
-	/* Set up the interrupt handlers for the i8259 IRQs */
-	for (i = NR_SIU_INTS; i < NR_SIU_INTS + 8; i++) {
-                irq_desc[i].chip = &sbc82xx_i8259_ic;
-		irq_desc[i].status |= IRQ_LEVEL;
-	}
-
-	/* make IRQ6 level sensitive */
-	ic->ic_siexr &= ~(1 << (14 - (SIU_INT_IRQ6 - SIU_INT_IRQ1)));
-	irq_desc[SIU_INT_IRQ6].status |= IRQ_LEVEL;
-
-	/* Initialise the i8259 */
-	sbc82xx_i8259_map[0] = 0x1b;	/* ICW1: Level, no cascade, ICW4 */
-	sbc82xx_i8259_map[1] = 0x00;	/* ICW2: vector base */
-					/* No ICW3 (no cascade) */
-	sbc82xx_i8259_map[1] = 0x01;	/* ICW4: 8086 mode, normal EOI */
-
-	sbc82xx_i8259_map[0] = 0x0b;	/* OCW3: Read IS register on RD# pulse */
-
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask; /* Set interrupt mask */
-
-	/* Request cascade IRQ */
-	if (setup_irq(SIU_INT_IRQ6, &sbc82xx_i8259_irqaction)) {
-		printk("Installation of i8259 IRQ demultiplexer failed.\n");
-	}
-}
-
-static int sbc82xx_pci_map_irq(struct pci_dev *dev, unsigned char idsel,
-			       unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 *  A      B      C      D
-		 */
-		{ SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD },	/* IDSEL 16 - PMC slot */
-		{ SBC82xx_PC_IRQA, SBC82xx_PC_IRQB, -1,  -1  },			/* IDSEL 17 - CardBus */
-		{ SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD }, /* IDSEL 18 - PCI-X bridge */
-	};
-
-	const long min_idsel = 16, max_idsel = 18, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __devinit quirk_sbc8260_cardbus(struct pci_dev *pdev)
-{
-	uint32_t ctrl;
-
-	if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(17, 0))
-		return;
-
-	printk(KERN_INFO "Setting up CardBus controller\n");
-
-	/* Set P2CCLK bit in System Control Register */
-	pci_read_config_dword(pdev, 0x80, &ctrl);
-	ctrl |= (1<<27);
-	pci_write_config_dword(pdev, 0x80, ctrl);
-
-	/* Set MFUNC up for PCI IRQ routing via INTA and INTB, and LEDs. */
-	pci_write_config_dword(pdev, 0x8c, 0x00c01d22);
-
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, quirk_sbc8260_cardbus);
-
-void __init
-m82xx_board_init(void)
-{
-	/* u-boot may be using one of the FCC Ethernet devices.
-	   Use the MAC address to the SCC. */
-	__res[offsetof(bd_t, bi_enetaddr[5])] &= ~3;
-
-	/* Anything special for this platform */
-	callback_init_IRQ	= ppc_md.init_IRQ;
-
-	ppc_md.init_IRQ		= sbc82xx_init_IRQ;
-	ppc_md.pci_map_irq	= sbc82xx_pci_map_irq;
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init        = NULL;
-	ppc_md.get_rtc_time     = NULL;
-	ppc_md.set_rtc_time     = NULL;
-	ppc_md.nvram_read_val   = NULL;
-	ppc_md.nvram_write_val  = NULL;
-	late_time_init		= sbc82xx_time_init;
-#endif /* CONFIG_GEN_RTC */
-}
diff --git a/arch/ppc/platforms/sbc82xx.h b/arch/ppc/platforms/sbc82xx.h
deleted file mode 100644
index e4042d4995f6..000000000000
--- a/arch/ppc/platforms/sbc82xx.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Board information for the SBCPowerQUICCII, which should be generic for
- * all 8260 boards.  The IMMR is now given to us so the hard define
- * will soon be removed.  All of the clock values are computed from
- * the configuration SCMR and the Power-On-Reset word.
- */
-
-#ifndef __PPC_SBC82xx_H__
-#define __PPC_SBC82xx_H__
-
-#include <asm/ppcboot.h>
-
-#define CPM_MAP_ADDR			0xf0000000
-
-#define SBC82xx_TODC_NVRAM_ADDR		0xd0000000
-
-#define SBC82xx_MACADDR_NVRAM_FCC1	0x220000c9	/* JP6B */
-#define SBC82xx_MACADDR_NVRAM_SCC1	0x220000cf	/* JP6A */
-#define SBC82xx_MACADDR_NVRAM_FCC2	0x220000d5	/* JP7A */
-#define SBC82xx_MACADDR_NVRAM_FCC3	0x220000db	/* JP7B */
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"Wind River"
-#define CPUINFO_MACHINE		"SBC PowerQUICC II"
-
-#define BOOTROM_RESTART_ADDR      ((uint)0x40000104)
-
-#define SBC82xx_PC_IRQA (NR_SIU_INTS+0)
-#define SBC82xx_PC_IRQB (NR_SIU_INTS+1)
-#define SBC82xx_MPC185_IRQ (NR_SIU_INTS+2)
-#define SBC82xx_ATM_IRQ (NR_SIU_INTS+3)
-#define SBC82xx_PIRQA (NR_SIU_INTS+4)
-#define SBC82xx_PIRQB (NR_SIU_INTS+5)
-#define SBC82xx_PIRQC (NR_SIU_INTS+6)
-#define SBC82xx_PIRQD (NR_SIU_INTS+7)
-
-#endif /* __PPC_SBC82xx_H__ */
diff --git a/arch/ppc/platforms/sbs8260.h b/arch/ppc/platforms/sbs8260.h
deleted file mode 100644
index d51427a0f0d4..000000000000
--- a/arch/ppc/platforms/sbs8260.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ASSEMBLY__
-/* Board information for various SBS 8260 cards, which should be generic for
- * all 8260 boards.  The IMMR is now given to us so the hard define
- * will soon be removed.  All of the clock values are computed from
- * the configuration SCMR and the Power-On-Reset word.
- */
-
-#define CPM_MAP_ADDR	((uint)0xfe000000)
-
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_cpmfreq;	/* CPM Freq, in MHz */
-	unsigned int	bi_brgfreq;	/* BRG Freq, in MHz */
-	unsigned int	bi_vco;		/* VCO Out from PLL */
-	unsigned int	bi_baudrate;	/* Default console baud rate */
-	unsigned int	bi_immr;	/* IMMR when called from boot rom */
-	unsigned char	bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-#endif /* !__ASSEMBLY__ */
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
deleted file mode 100644
index a344134f14b8..000000000000
--- a/arch/ppc/platforms/spruce.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Board and PCI setup routines for IBM Spruce
- *
- * Author: MontaVista Software <source@mvista.com>
- *
- * 2000-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/kgdb.h>
-
-#include <syslib/cpc700.h>
-
-#include "spruce.h"
-
-static inline int
-spruce_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-		/*
-		 * 	PCI IDSEL/INTPIN->INTLINE
-		 * 	A	B	C	D
-		 */
-	{
-		{23, 24, 25, 26},	/* IDSEL 1 - PCI slot 3 */
-		{24, 25, 26, 23},	/* IDSEL 2 - PCI slot 2 */
-		{25, 26, 23, 24},	/* IDSEL 3 - PCI slot 1 */
-		{26, 23, 24, 25},	/* IDSEL 4 - PCI slot 0 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init
-spruce_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Setup hose */
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	pci_init_resource(&hose->io_resource,
-			SPRUCE_PCI_LOWER_IO,
-			SPRUCE_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			SPRUCE_PCI_LOWER_MEM,
-			SPRUCE_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = SPRUCE_PCI_LOWER_IO;
-	hose->io_space.end = SPRUCE_PCI_UPPER_IO;
-	hose->mem_space.start = SPRUCE_PCI_LOWER_MEM;
-	hose->mem_space.end = SPRUCE_PCI_UPPER_MEM;
-	hose->io_base_virt = (void *)SPRUCE_ISA_IO_BASE;
-
-	setup_indirect_pci(hose,
-			SPRUCE_PCI_CONFIG_ADDR,
-			SPRUCE_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = spruce_map_irq;
-}
-
-/*
- * CPC700 PIC interrupt programming table
- *
- * First entry is the sensitivity (level/edge), second is the polarity.
- */
-unsigned int cpc700_irq_assigns[32][2] = {
-	{ 1, 1 },       /* IRQ  0: ECC Correctable Error - rising edge */
-	{ 1, 1 },       /* IRQ  1: PCI Write Mem Range   - rising edge */
-	{ 0, 1 },       /* IRQ  2: PCI Write Command Reg - active high */
-	{ 0, 1 },       /* IRQ  3: UART 0                - active high */
-	{ 0, 1 },       /* IRQ  4: UART 1                - active high */
-	{ 0, 1 },       /* IRQ  5: ICC 0                 - active high */
-	{ 0, 1 },       /* IRQ  6: ICC 1                 - active high */
-	{ 0, 1 },       /* IRQ  7: GPT Compare 0         - active high */
-	{ 0, 1 },       /* IRQ  8: GPT Compare 1         - active high */
-	{ 0, 1 },       /* IRQ  9: GPT Compare 2         - active high */
-	{ 0, 1 },       /* IRQ 10: GPT Compare 3         - active high */
-	{ 0, 1 },       /* IRQ 11: GPT Compare 4         - active high */
-	{ 0, 1 },       /* IRQ 12: GPT Capture 0         - active high */
-	{ 0, 1 },       /* IRQ 13: GPT Capture 1         - active high */
-	{ 0, 1 },       /* IRQ 14: GPT Capture 2         - active high */
-	{ 0, 1 },       /* IRQ 15: GPT Capture 3         - active high */
-	{ 0, 1 },       /* IRQ 16: GPT Capture 4         - active high */
-	{ 0, 0 },       /* IRQ 17: Reserved */
-	{ 0, 0 },       /* IRQ 18: Reserved */
-	{ 0, 0 },       /* IRQ 19: Reserved */
-	{ 0, 1 },       /* IRQ 20: FPGA EXT_IRQ0         - active high */
-	{ 1, 1 },       /* IRQ 21: Mouse                 - rising edge */
-	{ 1, 1 },       /* IRQ 22: Keyboard              - rising edge */
-	{ 0, 0 },       /* IRQ 23: PCI Slot 3            - active low */
-	{ 0, 0 },       /* IRQ 24: PCI Slot 2            - active low */
-	{ 0, 0 },       /* IRQ 25: PCI Slot 1            - active low */
-	{ 0, 0 },       /* IRQ 26: PCI Slot 0            - active low */
-};
-
-static void __init
-spruce_calibrate_decr(void)
-{
-	int freq, divisor = 4;
-
-	/* determine processor bus speed */
-	freq = SPRUCE_BUS_SPEED;
-	tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-}
-
-static int
-spruce_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: Spruce\n");
-
-	return 0;
-}
-
-static void __init
-spruce_early_serial_map(void)
-{
-	u32 uart_clk;
-	struct uart_port serial_req;
-
-	if (SPRUCE_UARTCLK_IS_33M(readb(SPRUCE_FPGA_REG_A)))
-		uart_clk = SPRUCE_BAUD_33M * 16;
-	else
-		uart_clk = SPRUCE_BAUD_30M * 16;
-
-	/* Setup serial port access */
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.uartclk = uart_clk;
-	serial_req.irq = UART0_INT;
-	serial_req.flags = UPF_BOOT_AUTOCONF;
-	serial_req.iotype = UPIO_MEM;
-	serial_req.membase = (u_char *)UART0_IO_BASE;
-	serial_req.regshift = 0;
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-	gen550_init(0, &serial_req);
-#endif
-#ifdef CONFIG_SERIAL_8250
-	if (early_serial_setup(&serial_req) != 0)
-		printk("Early serial init of port 0 failed\n");
-#endif
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	serial_req.line = 1;
-	serial_req.irq = UART1_INT;
-	serial_req.membase = (u_char *)UART1_IO_BASE;
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-	gen550_init(1, &serial_req);
-#endif
-#ifdef CONFIG_SERIAL_8250
-	if (early_serial_setup(&serial_req) != 0)
-		printk("Early serial init of port 1 failed\n");
-#endif
-}
-
-TODC_ALLOC();
-
-static void __init
-spruce_setup_arch(void)
-{
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1643, 0, 0, SPRUCE_RTC_BASE_ADDR, 8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* Setup PCI host bridge */
-	spruce_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA1;
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "System Identification: IBM Spruce\n");
-	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-static void
-spruce_restart(char *cmd)
-{
-	local_irq_disable();
-
-	/* SRR0 has system reset vector, SRR1 has default MSR value */
-	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-	__asm__ __volatile__
-	("\n\
-	lis	3,0xfff0	\n\
-	ori	3,3,0x0100	\n\
-	mtspr	26,3		\n\
-	li	3,0		\n\
-	mtspr	27,3		\n\
-	rfi			\n\
-	");
-	for(;;);
-}
-
-static void
-spruce_power_off(void)
-{
-	for(;;);
-}
-
-static void
-spruce_halt(void)
-{
-	spruce_restart(NULL);
-}
-
-static void __init
-spruce_map_io(void)
-{
-	io_block_mapping(SPRUCE_PCI_IO_BASE, SPRUCE_PCI_PHY_IO_BASE,
-			 0x08000000, _PAGE_IO);
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-spruce_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf8000ffe);
-	mtspr(SPRN_DBAT1L, 0xf800002a);
-	mb();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Map in board regs, etc. */
-	spruce_set_bat();
-
-	isa_io_base = SPRUCE_ISA_IO_BASE;
-	pci_dram_offset = SPRUCE_PCI_SYS_MEM_BASE;
-
-	ppc_md.setup_arch = spruce_setup_arch;
-	ppc_md.show_cpuinfo = spruce_show_cpuinfo;
-	ppc_md.init_IRQ = cpc700_init_IRQ;
-	ppc_md.get_irq = cpc700_get_irq;
-
-	ppc_md.setup_io_mappings = spruce_map_io;
-
-	ppc_md.restart = spruce_restart;
-	ppc_md.power_off = spruce_power_off;
-	ppc_md.halt = spruce_halt;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = spruce_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-	spruce_early_serial_map();
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-}
diff --git a/arch/ppc/platforms/spruce.h b/arch/ppc/platforms/spruce.h
deleted file mode 100644
index f1f96f1de72a..000000000000
--- a/arch/ppc/platforms/spruce.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/ppc/platforms/spruce.h
- *
- * Definitions for IBM Spruce reference board support
- *
- * Authors: Matt Porter and Johnnie Peters
- *          mporter@mvista.com
- *          jpeters@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_SPRUCE_H__
-#define __ASM_SPRUCE_H__
-
-#define SPRUCE_PCI_CONFIG_ADDR	0xfec00000
-#define SPRUCE_PCI_CONFIG_DATA	0xfec00004
-
-#define SPRUCE_PCI_PHY_IO_BASE	0xf8000000
-#define SPRUCE_PCI_IO_BASE	SPRUCE_PCI_PHY_IO_BASE
-
-#define SPRUCE_PCI_SYS_MEM_BASE	0x00000000
-
-#define SPRUCE_PCI_LOWER_MEM	0x80000000
-#define SPRUCE_PCI_UPPER_MEM	0x9fffffff
-#define SPRUCE_PCI_LOWER_IO	0x00000000
-#define SPRUCE_PCI_UPPER_IO	0x03ffffff
-
-#define	SPRUCE_ISA_IO_BASE	SPRUCE_PCI_IO_BASE
-
-#define SPRUCE_MEM_SIZE		0x04000000
-#define SPRUCE_BUS_SPEED	66666667
-
-#define SPRUCE_NVRAM_BASE_ADDR	0xff800000
-#define SPRUCE_RTC_BASE_ADDR	SPRUCE_NVRAM_BASE_ADDR
-
-/*
- * Serial port defines
- */
-#define SPRUCE_FPGA_REG_A	0xff820000
-#define SPRUCE_UARTCLK_33M	0x02
-#define SPRUCE_UARTCLK_IS_33M(reg)	(reg & SPRUCE_UARTCLK_33M)
-
-#define UART0_IO_BASE	0xff600300
-#define UART1_IO_BASE	0xff600400
-
-#define RS_TABLE_SIZE	2
-
-#define SPRUCE_BAUD_33M	(33000000/64)
-#define SPRUCE_BAUD_30M	(30000000/64)
-#define BASE_BAUD	SPRUCE_BAUD_33M
-
-#define UART0_INT	3
-#define UART1_INT	4
-
-#define STD_UART_OP(num)						\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,				\
-		ASYNC_BOOT_AUTOCONF,					\
-		iomem_base: (unsigned char *) UART##num##_IO_BASE,	\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-#endif /* __ASM_SPRUCE_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/tqm8260.h b/arch/ppc/platforms/tqm8260.h
deleted file mode 100644
index 7f8c9a6928f8..000000000000
--- a/arch/ppc/platforms/tqm8260.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * TQM8260 board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __TQM8260_PLATFORM
-#define __TQM8260_PLATFORM
-
-
-#include <asm/ppcboot.h>
-
-#define CPM_MAP_ADDR		((uint)0xFFF00000)
-#define PHY_INTERRUPT		25
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"IN2 Systems"
-#define CPUINFO_MACHINE		"TQM8260 PowerPC"
-
-#define BOOTROM_RESTART_ADDR	((uint)0x40000104)
-
-#endif	/* __TQM8260_PLATFORM */
diff --git a/arch/ppc/platforms/tqm8260_setup.c b/arch/ppc/platforms/tqm8260_setup.c
deleted file mode 100644
index b766339f44ac..000000000000
--- a/arch/ppc/platforms/tqm8260_setup.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * TQM8260 platform support
- *
- * Author: Allen Curtis <acurtis@onz.com>
- * Derived from: m8260_setup.c by Dan Malek, MVista
- *
- * Copyright 2002 Ones and Zeros, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/machdep.h>
-
-static int
-tqm8260_set_rtc_time(unsigned long time)
-{
-	((cpm2_map_t *)CPM_MAP_ADDR)->im_sit.sit_tmcnt = time;
-	((cpm2_map_t *)CPM_MAP_ADDR)->im_sit.sit_tmcntsc = 0x3;
-
-	return(0);
-}
-
-static unsigned long
-tqm8260_get_rtc_time(void)
-{
-	return ((cpm2_map_t *)CPM_MAP_ADDR)->im_sit.sit_tmcnt;
-}
-
-void __init
-m82xx_board_init(void)
-{
-	/* Anything special for this platform */
-	ppc_md.set_rtc_time	= tqm8260_set_rtc_time;
-	ppc_md.get_rtc_time	= tqm8260_get_rtc_time;
-}
diff --git a/arch/ppc/platforms/tqm8xx.h b/arch/ppc/platforms/tqm8xx.h
deleted file mode 100644
index 662131d0eb39..000000000000
--- a/arch/ppc/platforms/tqm8xx.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * TQM8xx(L) board specific definitions
- *
- * Copyright (c) 1999-2002 Wolfgang Denk (wd@denx.de)
- */
-
-#ifdef __KERNEL__
-#ifndef __MACH_TQM8xx_H
-#define __MACH_TQM8xx_H
-
-
-#include <asm/ppcboot.h>
-
-#ifndef __ASSEMBLY__
-#define	TQM_IMMR_BASE	0xFFF00000	/* phys. addr of IMMR */
-#define	TQM_IMAP_SIZE	(64 * 1024)	/* size of mapped area */
-
-#define	IMAP_ADDR	TQM_IMMR_BASE	/* physical base address of IMMR area */
-#define IMAP_SIZE	TQM_IMAP_SIZE	/* mapped size of IMMR area */
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define PCMCIA_MEM_SIZE		( 64 << 20 )
-
-#ifndef CONFIG_KUP4K
-# define	MAX_HWIFS	1	/* overwrite default in include/asm-ppc/ide.h	*/
-
-#else	/* CONFIG_KUP4K */
-
-# define	MAX_HWIFS	2	/* overwrite default in include/asm-ppc/ide.h	*/
-# ifndef __ASSEMBLY__
-# include <asm/8xx_immap.h>
-static __inline__ void ide_led(int on)
-{
-	volatile immap_t	*immap = (immap_t *)IMAP_ADDR;
-
-	if (on) {
-		immap->im_ioport.iop_padat &= ~0x80;
-	} else {
-		immap->im_ioport.iop_padat |= 0x80;
-	}
-}
-# endif	/* __ASSEMBLY__ */
-# define IDE_LED(x) ide_led((x))
-#endif	/* CONFIG_KUP4K */
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET		0
-#define IDE0_DATA_REG_OFFSET		(PCMCIA_MEM_SIZE + 0x320)
-#define IDE0_ERROR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 1)
-#define IDE0_NSECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 2)
-#define IDE0_SECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 3)
-#define IDE0_LCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 4)
-#define IDE0_HCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 5)
-#define IDE0_SELECT_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 6)
-#define IDE0_STATUS_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 7)
-#define IDE0_CONTROL_REG_OFFSET		0x0106
-#define IDE0_IRQ_REG_OFFSET		0x000A	/* not used */
-
-/* define IO_BASE for PCMCIA */
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE  (64<<10)
-
-#define	FEC_INTERRUPT		 9	/* = SIU_LEVEL4			*/
-#define PHY_INTERRUPT		12	/* = IRQ6			*/
-#define	IDE0_INTERRUPT		13
-
-#ifdef CONFIG_IDE
-#endif
-
-/*-----------------------------------------------------------------------
- * CPM Ethernet through SCCx.
- *-----------------------------------------------------------------------
- *
- */
-
-/***  TQM823L, TQM850L  ***********************************************/
-
-#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L)
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
-#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
-#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
-
-#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
-#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002600)
-#endif	/* CONFIG_TQM823L, CONFIG_TQM850L */
-
-/***  TQM860L  ********************************************************/
-
-#ifdef CONFIG_TQM860L
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0001)	/* PA 15 */
-#define PA_ENET_TXD	((ushort)0x0002)	/* PA 14 */
-#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PC_ENET_TENA	((ushort)0x0001)	/* PC 15 */
-#define PC_ENET_CLSN	((ushort)0x0010)	/* PC 11 */
-#define PC_ENET_RENA	((ushort)0x0020)	/* PC 10 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x00000026)
-#endif	/* CONFIG_TQM860L */
-
-/***  FPS850L  *********************************************************/
-
-#ifdef CONFIG_FPS850L
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
-#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
-#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PC_ENET_TENA	((ushort)0x0002)	/* PC 14 */
-#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
-#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002600)
-#endif	/* CONFIG_FPS850L */
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif	/* __MACH_TQM8xx_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
deleted file mode 100644
index 52ddebe6c6d1..000000000000
--- a/arch/ppc/syslib/Makefile
+++ /dev/null
@@ -1,96 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-CFLAGS_prom_init.o      += -fPIC
-CFLAGS_btext.o          += -fPIC
-
-wdt-mpc8xx-$(CONFIG_8xx_WDT)	+= m8xx_wdt.o
-
-obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
-obj-$(CONFIG_PPCBUG_NVRAM)	+= prep_nvram.o
-obj-$(CONFIG_PPC_OCP)		+= ocp.o
-obj-$(CONFIG_IBM_OCP)		+= ibm_ocp.o
-obj-$(CONFIG_44x)		+= ibm44x_common.o
-obj-$(CONFIG_440EP)		+= ibm440gx_common.o
-obj-$(CONFIG_440GP)		+= ibm440gp_common.o
-obj-$(CONFIG_440GX)		+= ibm440gx_common.o
-obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
-obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
-ifeq ($(CONFIG_4xx),y)
-ifeq ($(CONFIG_XILINX_VIRTEX),y)
-obj-$(CONFIG_40x)		+= xilinx_pic.o
-obj-y				+= virtex_devices.o
-else
-ifeq ($(CONFIG_403),y)
-obj-$(CONFIG_40x)		+= ppc403_pic.o
-else
-obj-$(CONFIG_40x)		+= ppc4xx_pic.o
-endif
-endif
-obj-$(CONFIG_44x)		+= ppc4xx_pic.o
-obj-$(CONFIG_40x)		+= ppc4xx_setup.o
-obj-$(CONFIG_GEN_RTC)		+= todc_time.o
-obj-$(CONFIG_PPC4xx_DMA)	+= ppc4xx_dma.o
-obj-$(CONFIG_PPC4xx_EDMA)	+= ppc4xx_sgdma.o
-ifeq ($(CONFIG_40x),y)
-obj-$(CONFIG_PCI)		+= pci_auto.o ppc405_pci.o
-endif
-endif
-obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
-				   ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
-obj-$(CONFIG_PCI_QSPAN)		+= qspan_pci.o
-obj-$(CONFIG_PPC_PREP)		+= open_pic.o todc_time.o
-obj-$(CONFIG_BAMBOO)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
-obj-$(CONFIG_EBONY)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
-obj-$(CONFIG_EV64360)		+= todc_time.o
-obj-$(CONFIG_CHESTNUT)		+= mv64360_pic.o pci_auto.o
-obj-$(CONFIG_GT64260)		+= gt64260_pic.o
-obj-$(CONFIG_LOPEC)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_HDPU)		+= pci_auto.o
-obj-$(CONFIG_LUAN)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_YUCCA)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_KATANA)		+= pci_auto.o
-obj-$(CONFIG_MV64360)		+= mv64360_pic.o
-obj-$(CONFIG_MV64X60)		+= mv64x60.o mv64x60_win.o
-obj-$(CONFIG_MVME5100)		+= open_pic.o todc_time.o \
-					pci_auto.o hawk_common.o
-obj-$(CONFIG_OCOTEA)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_PAL4)		+= cpc700_pic.o
-obj-$(CONFIG_POWERPMC250)	+= pci_auto.o
-obj-$(CONFIG_PPLUS)		+= hawk_common.o open_pic.o \
-				   todc_time.o pci_auto.o
-obj-$(CONFIG_PRPMC750)		+= open_pic.o pci_auto.o \
-					hawk_common.o
-obj-$(CONFIG_HARRIER)		+= harrier.o
-obj-$(CONFIG_PRPMC800)		+= open_pic.o pci_auto.o
-obj-$(CONFIG_RADSTONE_PPC7D)	+= pci_auto.o
-obj-$(CONFIG_SANDPOINT)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_SBC82xx)		+= todc_time.o
-obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o pci_auto.o \
-				   todc_time.o
-obj-$(CONFIG_TAISHAN)		+= pci_auto.o
-obj-$(CONFIG_8260)		+= m8260_setup.o pq2_devices.o pq2_sys.o \
-				   ppc_sys.o
-obj-$(CONFIG_PCI_8260)		+= m82xx_pci.o pci_auto.o
-obj-$(CONFIG_8260_PCI9)		+= m8260_pci_erratum9.o
-obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
-ifeq ($(CONFIG_PPC_GEN550),y)
-obj-$(CONFIG_KGDB)		+= gen550_kgdb.o gen550_dbg.o
-obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= gen550_dbg.o
-endif
-ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
-obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= mv64x60_dbg.o
-endif
-obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
-obj-$(CONFIG_MPC10X_BRIDGE)	+= mpc10x_common.o ppc_sys.o
-obj-$(CONFIG_MPC10X_OPENPIC)	+= open_pic.o
-obj-$(CONFIG_PPC_MPC52xx)	+= mpc52xx_setup.o mpc52xx_pic.o \
-					mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o
-ifeq ($(CONFIG_PPC_MPC52xx),y)
-obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
-endif
-
-obj-$(CONFIG_PPC_I8259)		+= i8259.o
diff --git a/arch/ppc/syslib/btext.c b/arch/ppc/syslib/btext.c
deleted file mode 100644
index d11667046f21..000000000000
--- a/arch/ppc/syslib/btext.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * Procedures for drawing on the screen early on in the boot process.
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/utsrelease.h>
-
-#include <asm/sections.h>
-#include <asm/bootx.h>
-#include <asm/btext.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/reg.h>
-
-#define NO_SCROLL
-
-#ifndef NO_SCROLL
-static void scrollscreen(void);
-#endif
-
-static void draw_byte(unsigned char c, long locX, long locY);
-static void draw_byte_32(unsigned char *bits, unsigned long *base, int rb);
-static void draw_byte_16(unsigned char *bits, unsigned long *base, int rb);
-static void draw_byte_8(unsigned char *bits, unsigned long *base, int rb);
-
-static int g_loc_X;
-static int g_loc_Y;
-static int g_max_loc_X;
-static int g_max_loc_Y;
-
-unsigned long disp_BAT[2] __initdata = {0, 0};
-
-#define cmapsz	(16*256)
-
-static unsigned char vga_font[cmapsz];
-
-int boot_text_mapped;
-int force_printk_to_btext = 0;
-
-boot_infos_t disp_bi;
-
-extern char *klimit;
-
-/*
- * Powermac can use btext_* after boot for xmon,
- * chrp only uses it during early boot.
- */
-#ifdef CONFIG_XMON
-#define BTEXT
-#define BTDATA
-#else
-#define BTEXT	__init
-#define BTDATA	__initdata
-#endif /* CONFIG_XMON */
-
-/*
- * This is called only when we are booted via BootX.
- */
-void __init
-btext_init(boot_infos_t *bi)
-{
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = (bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) / 8;
-	g_max_loc_Y = (bi->dispDeviceRect[3] - bi->dispDeviceRect[1]) / 16;
-	disp_bi = *bi;
-	boot_text_mapped = 1;
-}
-
-void __init
-btext_welcome(void)
-{
-	unsigned long flags;
-	unsigned long pvr;
-	boot_infos_t* bi = &disp_bi;
-
-	btext_drawstring("Welcome to Linux, kernel " UTS_RELEASE "\n");
-	btext_drawstring("\nlinked at        : 0x");
-	btext_drawhex(KERNELBASE);
-	btext_drawstring("\nframe buffer at  : 0x");
-	btext_drawhex((unsigned long)bi->dispDeviceBase);
-	btext_drawstring(" (phys), 0x");
-	btext_drawhex((unsigned long)bi->logicalDisplayBase);
-	btext_drawstring(" (log)");
-	btext_drawstring("\nklimit           : 0x");
-	btext_drawhex((unsigned long)klimit);
-	btext_drawstring("\nMSR              : 0x");
-	__asm__ __volatile__ ("mfmsr %0" : "=r" (flags));
-	btext_drawhex(flags);
-	__asm__ __volatile__ ("mfspr %0, 287" : "=r" (pvr));
-	pvr >>= 16;
-	if (pvr > 1) {
-	    btext_drawstring("\nHID0             : 0x");
-	    __asm__ __volatile__ ("mfspr %0, 1008" : "=r" (flags));
-	    btext_drawhex(flags);
-	}
-	if (pvr == 8 || pvr == 12 || pvr == 0x800c) {
-	    btext_drawstring("\nICTC             : 0x");
-	    __asm__ __volatile__ ("mfspr %0, 1019" : "=r" (flags));
-	    btext_drawhex(flags);
-	}
-	btext_drawstring("\n\n");
-}
-
-/* Calc BAT values for mapping the display and store them
- * in disp_BAT.  Those values are then used from head.S to map
- * the display during identify_machine() and MMU_Init()
- *
- * The display is mapped to virtual address 0xD0000000, rather
- * than 1:1, because some some CHRP machines put the frame buffer
- * in the region starting at 0xC0000000 (KERNELBASE).
- * This mapping is temporary and will disappear as soon as the
- * setup done by MMU_Init() is applied.
- *
- * For now, we align the BAT and then map 8Mb on 601 and 16Mb
- * on other PPCs. This may cause trouble if the framebuffer
- * is really badly aligned, but I didn't encounter this case
- * yet.
- */
-void __init
-btext_prepare_BAT(void)
-{
-	boot_infos_t* bi = &disp_bi;
-	unsigned long vaddr = KERNELBASE + 0x10000000;
-	unsigned long addr;
-	unsigned long lowbits;
-
-	addr = (unsigned long)bi->dispDeviceBase;
-	if (!addr) {
-		boot_text_mapped = 0;
-		return;
-	}
-	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
-		/* 603, 604, G3, G4, ... */
-		lowbits = addr & ~0xFF000000UL;
-		addr &= 0xFF000000UL;
-		disp_BAT[0] = vaddr | (BL_16M<<2) | 2;
-		disp_BAT[1] = addr | (_PAGE_NO_CACHE | _PAGE_GUARDED | BPP_RW);	
-	} else {
-		/* 601 */
-		lowbits = addr & ~0xFF800000UL;
-		addr &= 0xFF800000UL;
-		disp_BAT[0] = vaddr | (_PAGE_NO_CACHE | PP_RWXX) | 4;
-		disp_BAT[1] = addr | BL_8M | 0x40;
-	}
-	bi->logicalDisplayBase = (void *) (vaddr + lowbits);
-}
-
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
- */
-void __init
-btext_setup_display(int width, int height, int depth, int pitch,
-		    unsigned long address)
-{
-	boot_infos_t* bi = &disp_bi;
-
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = width / 8;
-	g_max_loc_Y = height / 16;
-	bi->logicalDisplayBase = (unsigned char *)address;
-	bi->dispDeviceBase = (unsigned char *)address;
-	bi->dispDeviceRowBytes = pitch;
-	bi->dispDeviceDepth = depth;
-	bi->dispDeviceRect[0] = bi->dispDeviceRect[1] = 0;
-	bi->dispDeviceRect[2] = width;
-	bi->dispDeviceRect[3] = height;
-	boot_text_mapped = 1;
-}
-
-/* Here's a small text engine to use during early boot
- * or for debugging purposes
- *
- * todo:
- *
- *  - build some kind of vgacon with it to enable early printk
- *  - move to a separate file
- *  - add a few video driver hooks to keep in sync with display
- *    changes.
- */
-
-void
-map_boot_text(void)
-{
-	unsigned long base, offset, size;
-	boot_infos_t *bi = &disp_bi;
-	unsigned char *vbase;
-
-	/* By default, we are no longer mapped */
-	boot_text_mapped = 0;
-	if (bi->dispDeviceBase == 0)
-		return;
-	base = ((unsigned long) bi->dispDeviceBase) & 0xFFFFF000UL;
-	offset = ((unsigned long) bi->dispDeviceBase) - base;
-	size = bi->dispDeviceRowBytes * bi->dispDeviceRect[3] + offset
-		+ bi->dispDeviceRect[0];
-	vbase = ioremap(base, size);
-	if (vbase == 0)
-		return;
-	bi->logicalDisplayBase = vbase + offset;
-	boot_text_mapped = 1;
-}
-
-/* Calc the base address of a given point (x,y) */
-static unsigned char * BTEXT
-calc_base(boot_infos_t *bi, int x, int y)
-{
-	unsigned char *base;
-
-	base = bi->logicalDisplayBase;
-	if (base == 0)
-		base = bi->dispDeviceBase;
-	base += (x + bi->dispDeviceRect[0]) * (bi->dispDeviceDepth >> 3);
-	base += (y + bi->dispDeviceRect[1]) * bi->dispDeviceRowBytes;
-	return base;
-}
-
-/* Adjust the display to a new resolution */
-void
-btext_update_display(unsigned long phys, int width, int height,
-		     int depth, int pitch)
-{
-	boot_infos_t *bi = &disp_bi;
-
-	if (bi->dispDeviceBase == 0)
-		return;
-
-	/* check it's the same frame buffer (within 256MB) */
-	if ((phys ^ (unsigned long)bi->dispDeviceBase) & 0xf0000000)
-		return;
-
-	bi->dispDeviceBase = (__u8 *) phys;
-	bi->dispDeviceRect[0] = 0;
-	bi->dispDeviceRect[1] = 0;
-	bi->dispDeviceRect[2] = width;
-	bi->dispDeviceRect[3] = height;
-	bi->dispDeviceDepth = depth;
-	bi->dispDeviceRowBytes = pitch;
-	if (boot_text_mapped) {
-		iounmap(bi->logicalDisplayBase);
-		boot_text_mapped = 0;
-	}
-	map_boot_text();
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = width / 8;
-	g_max_loc_Y = height / 16;
-}
-
-void BTEXT btext_clearscreen(void)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
-	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-					(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
-	{
-		unsigned long *ptr = base;
-		for(j=width; j; --j)
-			*(ptr++) = 0;
-		base += (bi->dispDeviceRowBytes >> 2);
-	}
-}
-
-__inline__ void dcbst(const void* addr)
-{
-	__asm__ __volatile__ ("dcbst 0,%0" :: "r" (addr));
-}
-
-void BTEXT btext_flushscreen(void)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
-	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-					(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
-	{
-		unsigned long *ptr = base;
-		for(j=width; j>0; j-=8) {
-			dcbst(ptr);
-			ptr += 8;
-		}
-		base += (bi->dispDeviceRowBytes >> 2);
-	}
-}
-
-#ifndef NO_SCROLL
-static BTEXT void
-scrollscreen(void)
-{
-	boot_infos_t* bi		= &disp_bi;
-	unsigned long *src		= (unsigned long *)calc_base(bi,0,16);
-	unsigned long *dst		= (unsigned long *)calc_base(bi,0,0);
-	unsigned long width		= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-						(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-#ifdef CONFIG_ADB_PMU
-	pmu_suspend();	/* PMU will not shut us down ! */
-#endif
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1] - 16); i++)
-	{
-		unsigned long *src_ptr = src;
-		unsigned long *dst_ptr = dst;
-		for(j=width; j; --j)
-			*(dst_ptr++) = *(src_ptr++);
-		src += (bi->dispDeviceRowBytes >> 2);
-		dst += (bi->dispDeviceRowBytes >> 2);
-	}
-	for (i=0; i<16; i++)
-	{
-		unsigned long *dst_ptr = dst;
-		for(j=width; j; --j)
-			*(dst_ptr++) = 0;
-		dst += (bi->dispDeviceRowBytes >> 2);
-	}
-#ifdef CONFIG_ADB_PMU
-	pmu_resume();	/* PMU will not shut us down ! */
-#endif
-}
-#endif /* ndef NO_SCROLL */
-
-void BTEXT btext_drawchar(char c)
-{
-	int cline = 0, x;
-
-	if (!boot_text_mapped)
-		return;
-
-	switch (c) {
-	case '\b':
-		if (g_loc_X > 0)
-			--g_loc_X;
-		break;
-	case '\t':
-		g_loc_X = (g_loc_X & -8) + 8;
-		break;
-	case '\r':
-		g_loc_X = 0;
-		break;
-	case '\n':
-		g_loc_X = 0;
-		g_loc_Y++;
-		cline = 1;
-		break;
-	default:
-		draw_byte(c, g_loc_X++, g_loc_Y);
-	}
-	if (g_loc_X >= g_max_loc_X) {
-		g_loc_X = 0;
-		g_loc_Y++;
-		cline = 1;
-	}
-#ifndef NO_SCROLL
-	while (g_loc_Y >= g_max_loc_Y) {
-		scrollscreen();
-		g_loc_Y--;
-	}
-#else
-	/* wrap around from bottom to top of screen so we don't
-	   waste time scrolling each line.  -- paulus. */
-	if (g_loc_Y >= g_max_loc_Y)
-		g_loc_Y = 0;
-	if (cline) {
-		for (x = 0; x < g_max_loc_X; ++x)
-			draw_byte(' ', x, g_loc_Y);
-	}
-#endif
-}
-
-void BTEXT
-btext_drawstring(const char *c)
-{
-	if (!boot_text_mapped)
-		return;
-	while (*c)
-		btext_drawchar(*c++);
-}
-
-void BTEXT
-btext_drawhex(unsigned long v)
-{
-	static char hex_table[] = "0123456789abcdef";
-
-	if (!boot_text_mapped)
-		return;
-	btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  8) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  4) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  0) & 0x0000000FUL]);
-	btext_drawchar(' ');
-}
-
-static void BTEXT
-draw_byte(unsigned char c, long locX, long locY)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned char *base	= calc_base(bi, locX << 3, locY << 4);
-	unsigned char *font	= &vga_font[((unsigned long)c) * 16];
-	int rb			= bi->dispDeviceRowBytes;
-
-	switch(bi->dispDeviceDepth) {
-	case 24:
-	case 32:
-		draw_byte_32(font, (unsigned long *)base, rb);
-		break;
-	case 15:
-	case 16:
-		draw_byte_16(font, (unsigned long *)base, rb);
-		break;
-	case 8:
-		draw_byte_8(font, (unsigned long *)base, rb);
-		break;
-	}
-}
-
-static unsigned long expand_bits_8[16] BTDATA = {
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff,
-	0xff000000,
-	0xff0000ff,
-	0xff00ff00,
-	0xff00ffff,
-	0xffff0000,
-	0xffff00ff,
-	0xffffff00,
-	0xffffffff
-};
-
-static unsigned long expand_bits_16[4] BTDATA = {
-	0x00000000,
-	0x0000ffff,
-	0xffff0000,
-	0xffffffff
-};
-
-
-static void BTEXT
-draw_byte_32(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (-(bits >> 7) & fg) ^ bg;
-		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
-		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
-		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
-		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
-		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
-		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
-		base[7] = (-(bits & 1) & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static void BTEXT
-draw_byte_16(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-	unsigned long *eb = expand_bits_16;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 6] & fg) ^ bg;
-		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
-		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
-		base[3] = (eb[bits & 3] & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static void BTEXT
-draw_byte_8(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0x0F0F0F0FUL;
-	int bg = 0x00000000UL;
-	unsigned long *eb = expand_bits_8;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 4] & fg) ^ bg;
-		base[1] = (eb[bits & 0xf] & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static unsigned char vga_font[cmapsz] BTDATA = {
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd,
-0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff,
-0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe,
-0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
-0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
-0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00,
-0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd,
-0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e,
-0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30,
-0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63,
-0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8,
-0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e,
-0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66,
-0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb,
-0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6,
-0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
-0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0,
-0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c,
-0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c,
-0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18,
-0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c,
-0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30,
-0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18,
-0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe,
-0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
-0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18,
-0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00,
-0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00,
-0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
-0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde,
-0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38,
-0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0,
-0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c,
-0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68,
-0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
-0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c,
-0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60,
-0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7,
-0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66,
-0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c,
-0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c,
-0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
-0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18,
-0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
-0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30,
-0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00,
-0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06,
-0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb,
-0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66,
-0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60,
-0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30,
-0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3,
-0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18,
-0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6,
-0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
-0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00,
-0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe,
-0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c,
-0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38,
-0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06,
-0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe,
-0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
-0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66,
-0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6,
-0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00,
-0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b,
-0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c,
-0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18,
-0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
-0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00,
-0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
-0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18,
-0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66,
-0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18,
-0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30,
-0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc,
-0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
-0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
-0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06,
-0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30,
-0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18,
-0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36,
-0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44,
-0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44,
-0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa,
-0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77,
-0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0,
-0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
-0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
-0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0,
-0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8,
-0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66,
-0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38,
-0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66,
-0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60,
-0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,
-0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18,
-0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
-0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00,
-0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
-0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c,
-0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00,
-};
diff --git a/arch/ppc/syslib/cpc700.h b/arch/ppc/syslib/cpc700.h
deleted file mode 100644
index 987e9aa0dd45..000000000000
--- a/arch/ppc/syslib/cpc700.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Header file for IBM CPC700 Host Bridge, et. al.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file contains the defines and macros for the IBM CPC700 host bridge,
- * memory controller, PIC, UARTs, IIC, and Timers.
- */
-
-#ifndef	__PPC_SYSLIB_CPC700_H__
-#define	__PPC_SYSLIB_CPC700_H__
-
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-/* XXX no barriers? not even any volatiles?  -- paulus */
-#define CPC700_OUT_32(a,d)  (*(u_int *)a = d)
-#define CPC700_IN_32(a)     (*(u_int *)a)
-
-/*
- * PCI Section
- */
-#define CPC700_PCI_CONFIG_ADDR          0xfec00000
-#define CPC700_PCI_CONFIG_DATA          0xfec00004
-
-/* CPU -> PCI memory window 0 */
-#define CPC700_PMM0_LOCAL		0xff400000	/* CPU physical addr */
-#define CPC700_PMM0_MASK_ATTR		0xff400004	/* size and attrs */
-#define CPC700_PMM0_PCI_LOW		0xff400008	/* PCI addr, low word */
-#define CPC700_PMM0_PCI_HIGH		0xff40000c	/* PCI addr, high wd */
-/* CPU -> PCI memory window 1 */
-#define CPC700_PMM1_LOCAL		0xff400010
-#define CPC700_PMM1_MASK_ATTR		0xff400014
-#define CPC700_PMM1_PCI_LOW		0xff400018
-#define CPC700_PMM1_PCI_HIGH		0xff40001c
-/* CPU -> PCI memory window 2 */
-#define CPC700_PMM2_LOCAL		0xff400020
-#define CPC700_PMM2_MASK_ATTR		0xff400024
-#define CPC700_PMM2_PCI_LOW		0xff400028
-#define CPC700_PMM2_PCI_HIGH		0xff40002c
-/* PCI memory -> CPU window 1 */
-#define CPC700_PTM1_MEMSIZE		0xff400030	/* window size */
-#define CPC700_PTM1_LOCAL		0xff400034	/* CPU phys addr */
-/* PCI memory -> CPU window 2 */
-#define CPC700_PTM2_MEMSIZE		0xff400038	/* size and enable */
-#define CPC700_PTM2_LOCAL		0xff40003c
-
-/*
- * PIC Section
- *
- * IBM calls the CPC700's programmable interrupt controller the Universal
- * Interrupt Controller or UIC.
- */
-
-/*
- * UIC Register Addresses.
- */
-#define	CPC700_UIC_UICSR		0xff500880	/* Status Reg (Rd/Clr)*/
-#define	CPC700_UIC_UICSRS		0xff500884	/* Status Reg (Set) */
-#define	CPC700_UIC_UICER		0xff500888	/* Enable Reg */
-#define	CPC700_UIC_UICCR		0xff50088c	/* Critical Reg */
-#define	CPC700_UIC_UICPR		0xff500890	/* Polarity Reg */
-#define	CPC700_UIC_UICTR		0xff500894	/* Trigger Reg */
-#define	CPC700_UIC_UICMSR		0xff500898	/* Masked Status Reg */
-#define	CPC700_UIC_UICVR		0xff50089c	/* Vector Reg */
-#define	CPC700_UIC_UICVCR		0xff5008a0	/* Vector Config Reg */
-
-#define	CPC700_UIC_UICER_ENABLE		0x00000001	/* Enable an IRQ */
-
-#define	CPC700_UIC_UICVCR_31_HI		0x00000000	/* IRQ 31 hi priority */
-#define	CPC700_UIC_UICVCR_0_HI		0x00000001	/* IRQ 0 hi priority */
-#define CPC700_UIC_UICVCR_BASE_MASK	0xfffffffc
-#define CPC700_UIC_UICVCR_ORDER_MASK	0x00000001
-
-/* Specify value of a bit for an IRQ. */
-#define	CPC700_UIC_IRQ_BIT(i)		((0x00000001) << (31 - (i)))
-
-/*
- * UIC Exports...
- */
-extern struct hw_interrupt_type cpc700_pic;
-extern unsigned int cpc700_irq_assigns[32][2];
-
-extern void __init cpc700_init_IRQ(void);
-extern int cpc700_get_irq(void);
-
-#endif	/* __PPC_SYSLIB_CPC700_H__ */
diff --git a/arch/ppc/syslib/cpc700_pic.c b/arch/ppc/syslib/cpc700_pic.c
deleted file mode 100644
index d48e8f45c050..000000000000
--- a/arch/ppc/syslib/cpc700_pic.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Interrupt controller support for IBM Spruce
- *
- * Authors: Mark Greer, Matt Porter, and Johnnie Peters
- *	    mgreer@mvista.com
- *          mporter@mvista.com
- *          jpeters@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-
-#include "cpc700.h"
-
-static void
-cpc700_unmask_irq(unsigned int irq)
-{
-	unsigned int tr_bits;
-
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		tr_bits = CPC700_IN_32(CPC700_UIC_UICTR);
-
-		if ((tr_bits & (1 << (31 - irq))) == 0) {
-			/* level trigger interrupt, clear bit in status
-			 * register */
-			CPC700_OUT_32(CPC700_UIC_UICSR, 1 << (31 - irq));
-		}
-
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		ppc_cached_irq_mask[0] |= CPC700_UIC_IRQ_BIT(irq);
-	
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-	}
-	return;
-}
-
-static void
-cpc700_mask_irq(unsigned int irq)
-{
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		ppc_cached_irq_mask[0] &=
-			~CPC700_UIC_IRQ_BIT(irq);
-
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-	}
-	return;
-}
-
-static void
-cpc700_mask_and_ack_irq(unsigned int irq)
-{
-	u_int	bit;
-
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		bit = CPC700_UIC_IRQ_BIT(irq);
-
-		ppc_cached_irq_mask[0] &= ~bit;
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-		CPC700_OUT_32(CPC700_UIC_UICSR, bit); /* Write 1 clears IRQ */
-	}
-	return;
-}
-
-static struct hw_interrupt_type cpc700_pic = {
-	.typename = "CPC700 PIC",
-	.enable = cpc700_unmask_irq,
-	.disable = cpc700_mask_irq,
-	.ack = cpc700_mask_and_ack_irq,
-};
-
-__init static void
-cpc700_pic_init_irq(unsigned int irq)
-{
-	unsigned int tmp;
-
-	/* Set interrupt sense */
-	tmp = CPC700_IN_32(CPC700_UIC_UICTR);
-	if (cpc700_irq_assigns[irq][0] == 0) {
-		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
-	} else {
-		tmp |= CPC700_UIC_IRQ_BIT(irq);
-	}
-	CPC700_OUT_32(CPC700_UIC_UICTR, tmp);
-
-	/* Set interrupt polarity */
-	tmp = CPC700_IN_32(CPC700_UIC_UICPR);
-	if (cpc700_irq_assigns[irq][1]) {
-		tmp |= CPC700_UIC_IRQ_BIT(irq);
-	} else {
-		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
-	}
-	CPC700_OUT_32(CPC700_UIC_UICPR, tmp);
-
-	/* Set interrupt critical */
-	tmp = CPC700_IN_32(CPC700_UIC_UICCR);
-	tmp |= CPC700_UIC_IRQ_BIT(irq);
-	CPC700_OUT_32(CPC700_UIC_UICCR, tmp);
-		
-	return;
-}
-
-__init void
-cpc700_init_IRQ(void)
-{
-	int i;
-
-	ppc_cached_irq_mask[0] = 0;
-	CPC700_OUT_32(CPC700_UIC_UICER, 0x00000000);    /* Disable all irq's */
-	CPC700_OUT_32(CPC700_UIC_UICSR, 0xffffffff);    /* Clear cur intrs */
-	CPC700_OUT_32(CPC700_UIC_UICCR, 0xffffffff);    /* Gen INT not MCP */
-	CPC700_OUT_32(CPC700_UIC_UICPR, 0x00000000);    /* Active low */
-	CPC700_OUT_32(CPC700_UIC_UICTR, 0x00000000);    /* Level Sensitive */
-	CPC700_OUT_32(CPC700_UIC_UICVR, CPC700_UIC_UICVCR_0_HI);
-						        /* IRQ 0 is highest */
-
-	for (i = 0; i < 17; i++) {
-		irq_desc[i].chip = &cpc700_pic;
-		cpc700_pic_init_irq(i);
-	}
-
-	for (i = 20; i < 32; i++) {
-		irq_desc[i].chip = &cpc700_pic;
-		cpc700_pic_init_irq(i);
-	}
-
-	return;
-}
-
-
-
-/*
- * Find the highest IRQ that generating an interrupt, if any.
- */
-int
-cpc700_get_irq(void)
-{
-	int irq = 0;
-	u_int irq_status, irq_test = 1;
-
-	irq_status = CPC700_IN_32(CPC700_UIC_UICMSR);
-
-	do
-	{
-		if (irq_status & irq_test)
-			break;
-		irq++;
-		irq_test <<= 1;
-	} while (irq < NR_IRQS);
-	
-
-	if (irq == NR_IRQS)
-	    irq = 33;
-
-	return (31 - irq);
-}
diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c
deleted file mode 100644
index 6cd859d7721f..000000000000
--- a/arch/ppc/syslib/cpm2_common.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * 8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- *	2.3.99 Updates
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mpc8260.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/cpm2.h>
-#include <asm/rheap.h>
-
-static void cpm2_dpinit(void);
-cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
-
-/* We allocate this here because it is used almost exclusively for
- * the communication processor devices.
- */
-cpm2_map_t *cpm2_immr;
-
-#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
-					   of space for CPM as it is larger
-					   than on PQ2 */
-
-void
-cpm2_reset(void)
-{
-	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
-
-	/* Reclaim the DP memory for our use.
-	 */
-	cpm2_dpinit();
-
-	/* Tell everyone where the comm processor resides.
-	 */
-	cpmp = &cpm2_immr->im_cpm;
-}
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks.  The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers).  Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK	(((bd_t *)__res)->bi_brgfreq)
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
-{
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	*/
-	if (brg < 4) {
-		bp = (uint *)&cpm2_immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&cpm2_immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-	volatile uint	*bp;
-
-	if (brg < 4) {
-		bp = (uint *)&cpm2_immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&cpm2_immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
-	if (div16)
-		*bp |= CPM_BRG_DIV16;
-}
-
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-static void cpm2_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	/* initialize the info header */
-	rh_init(&cpm_dpmem_info, 1,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	/* Attach the usable dpmem area */
-	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
-	 * varies with the processor and the microcode patches activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/* This function returns an index into the DPRAM area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-/* not sure if this is ever needed */
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)&cpm2_immr->im_dprambase[offset];
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
diff --git a/arch/ppc/syslib/cpm2_pic.c b/arch/ppc/syslib/cpm2_pic.c
deleted file mode 100644
index fb2d5842641a..000000000000
--- a/arch/ppc/syslib/cpm2_pic.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* The CPM2 internal interrupt controller.  It is usually
- * the only interrupt controller.
- * There are two 32-bit registers (high/low) for up to 64
- * possible interrupts.
- *
- * Now, the fun starts.....Interrupt Numbers DO NOT MAP
- * in a simple arithmetic fashion to mask or pending registers.
- * That is, interrupt 4 does not map to bit position 4.
- * We create two tables, indexed by vector number, to indicate
- * which register to use and which bit in the register to use.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/irq.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-
-#include "cpm2_pic.h"
-
-static	u_char	irq_to_siureg[] = {
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/* bit numbers do not match the docs, these are precomputed so the bit for
- * a given irq is (1 << irq_to_siubit[irq]) */
-static	u_char	irq_to_siubit[] = {
-	 0, 15, 14, 13, 12, 11, 10,  9,
-	 8,  7,  6,  5,  4,  3,  2,  1,
-	 2,  1,  0, 14, 13, 12, 11, 10,
-	 9,  8,  7,  6,  5,  4,  3,  0,
-	31, 30, 29, 28, 27, 26, 25, 24,
-	23, 22, 21, 20, 19, 18, 17, 16,
-	16, 17, 18, 19, 20, 21, 22, 23,
-	24, 25, 26, 27, 28, 29, 30, 31,
-};
-
-static void cpm2_mask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	ppc_cached_irq_mask[word] &= ~(1 << bit);
-	simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void cpm2_unmask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	ppc_cached_irq_mask[word] |= 1 << bit;
-	simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void cpm2_mask_and_ack(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr, *sipnr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	sipnr = &(cpm2_immr->im_intctl.ic_sipnrh);
-	ppc_cached_irq_mask[word] &= ~(1 << bit);
-	simr[word] = ppc_cached_irq_mask[word];
-	sipnr[word] = 1 << bit;
-}
-
-static void cpm2_end_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-			&& irq_desc[irq_nr].action) {
-
-		irq_nr -= CPM_IRQ_OFFSET;
-		bit = irq_to_siubit[irq_nr];
-		word = irq_to_siureg[irq_nr];
-
-		simr = &(cpm2_immr->im_intctl.ic_simrh);
-		ppc_cached_irq_mask[word] |= 1 << bit;
-		simr[word] = ppc_cached_irq_mask[word];
-		/*
-		 * Work around large numbers of spurious IRQs on PowerPC 82xx
-		 * systems.
-		 */
-		mb();
-	}
-}
-
-static struct hw_interrupt_type cpm2_pic = {
-	.typename = " CPM2 SIU ",
-	.enable = cpm2_unmask_irq,
-	.disable = cpm2_mask_irq,
-	.ack = cpm2_mask_and_ack,
-	.end = cpm2_end_irq,
-};
-
-int cpm2_get_irq(void)
-{
-	int irq;
-        unsigned long bits;
-
-        /* For CPM2, read the SIVEC register and shift the bits down
-         * to get the irq number.         */
-        bits = cpm2_immr->im_intctl.ic_sivec;
-        irq = bits >> 26;
-
-	if (irq == 0)
-		return(-1);
-	return irq+CPM_IRQ_OFFSET;
-}
-
-void cpm2_init_IRQ(void)
-{
-	int i;
-
-	/* Clear the CPM IRQ controller, in case it has any bits set
-	 * from the bootloader
-	 */
-
-	/* Mask out everything */
-	cpm2_immr->im_intctl.ic_simrh = 0x00000000;
-	cpm2_immr->im_intctl.ic_simrl = 0x00000000;
-	wmb();
-
-	/* Ack everything */
-	cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff;
-	cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff;
-	wmb();
-
-	/* Dummy read of the vector */
-	i = cpm2_immr->im_intctl.ic_sivec;
-	rmb();
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	cpm2_immr->im_intctl.ic_sicr = 0;
-	cpm2_immr->im_intctl.ic_scprrh = 0x05309770;
-	cpm2_immr->im_intctl.ic_scprrl = 0x05309770;
-
-
-	/* Enable chaining to OpenPIC, and make everything level
-	 */
-	for (i = 0; i < NR_CPM_INTS; i++) {
-		irq_desc[i+CPM_IRQ_OFFSET].chip = &cpm2_pic;
-		irq_desc[i+CPM_IRQ_OFFSET].status |= IRQ_LEVEL;
-	}
-}
diff --git a/arch/ppc/syslib/cpm2_pic.h b/arch/ppc/syslib/cpm2_pic.h
deleted file mode 100644
index 467339337a78..000000000000
--- a/arch/ppc/syslib/cpm2_pic.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _PPC_KERNEL_CPM2_H
-#define _PPC_KERNEL_CPM2_H
-
-extern int cpm2_get_irq(void);
-
-extern void cpm2_init_IRQ(void);
-
-#endif /* _PPC_KERNEL_CPM2_H */
diff --git a/arch/ppc/syslib/gen550.h b/arch/ppc/syslib/gen550.h
deleted file mode 100644
index 5254d3cdbca6..000000000000
--- a/arch/ppc/syslib/gen550.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * gen550 prototypes
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * 2004 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-extern void gen550_kgdb_map_scc(void);
diff --git a/arch/ppc/syslib/gen550_dbg.c b/arch/ppc/syslib/gen550_dbg.c
deleted file mode 100644
index 9293f5c59099..000000000000
--- a/arch/ppc/syslib/gen550_dbg.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * A library of polled 16550 serial routines.  These are intended to
- * be used to support progress messages, xmon, kgdb, etc. on a
- * variety of platforms.
- *
- * Adapted from lots of code ripped from the arch/ppc/boot/ polled
- * 16550 support.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2002-2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/tty.h>		/* For linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <asm/machdep.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#define SERIAL_BAUD	9600
-
-/* SERIAL_PORT_DFNS is defined in <asm/serial.h> */
-#ifndef SERIAL_PORT_DFNS
-#define SERIAL_PORT_DFNS
-#endif
-
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
-	SERIAL_PORT_DFNS	/* defined in <asm/serial.h> */
-};
-
-static void (*serial_outb)(unsigned long, unsigned char);
-static unsigned long (*serial_inb)(unsigned long);
-
-static int shift;
-
-unsigned long direct_inb(unsigned long addr)
-{
-	return readb((void __iomem *)addr);
-}
-
-void direct_outb(unsigned long addr, unsigned char val)
-{
-	writeb(val, (void __iomem *)addr);
-}
-
-unsigned long io_inb(unsigned long port)
-{
-	return inb(port);
-}
-
-void io_outb(unsigned long port, unsigned char val)
-{
-	outb(val, port);
-}
-
-unsigned long serial_init(int chan, void *ignored)
-{
-	unsigned long com_port;
-	unsigned char lcr, dlm;
-
-	/* We need to find out which type io we're expecting.  If it's
-	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
-	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
-	switch (rs_table[chan].io_type) {
-		case SERIAL_IO_PORT:
-			com_port = rs_table[chan].port;
-			serial_outb = io_outb;
-			serial_inb = io_inb;
-			break;
-		case SERIAL_IO_MEM:
-			com_port = (unsigned long)rs_table[chan].iomem_base;
-			serial_outb = direct_outb;
-			serial_inb = direct_inb;
-			break;
-		default:
-			/* We can't deal with it. */
-			return -1;
-	}
-
-	/* How far apart the registers are. */
-	shift = rs_table[chan].iomem_reg_shift;
-
-	/* save the LCR */
-	lcr = serial_inb(com_port + (UART_LCR << shift));
-	
-	/* Access baud rate */
-	serial_outb(com_port + (UART_LCR << shift), UART_LCR_DLAB);
-	dlm = serial_inb(com_port + (UART_DLM << shift));
-
-	/*
-	 * Test if serial port is unconfigured
-	 * We assume that no-one uses less than 110 baud or
-	 * less than 7 bits per character these days.
-	 *  -- paulus.
-	 */
-	if ((dlm <= 4) && (lcr & 2)) {
-		/* port is configured, put the old LCR back */
-		serial_outb(com_port + (UART_LCR << shift), lcr);
-	}
-	else {
-		/* Input clock. */
-		serial_outb(com_port + (UART_DLL << shift),
-			(rs_table[chan].baud_base / SERIAL_BAUD) & 0xFF);
-		serial_outb(com_port + (UART_DLM << shift),
-				(rs_table[chan].baud_base / SERIAL_BAUD) >> 8);
-		/* 8 data, 1 stop, no parity */
-		serial_outb(com_port + (UART_LCR << shift), 0x03);
-		/* RTS/DTR */
-		serial_outb(com_port + (UART_MCR << shift), 0x03);
-
-		/* Clear & enable FIFOs */
-		serial_outb(com_port + (UART_FCR << shift), 0x07);
-	}
-
-	return (com_port);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
-		;
-	serial_outb(com_port, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
-		;
-	return serial_inb(com_port);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
-}
-
-void
-serial_close(unsigned long com_port)
-{
-}
-
-void
-gen550_init(int i, struct uart_port *serial_req)
-{
-	rs_table[i].io_type = serial_req->iotype;
-	rs_table[i].port = serial_req->iobase;
-	rs_table[i].iomem_base = serial_req->membase;
-	rs_table[i].iomem_reg_shift = serial_req->regshift;
-	rs_table[i].baud_base = serial_req->uartclk ? serial_req->uartclk / 16 : BASE_BAUD;
-}
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-void
-gen550_progress(char *s, unsigned short hex)
-{
-	volatile unsigned int progress_debugport;
-	volatile char c;
-
-	progress_debugport = serial_init(0, NULL);
-
-	serial_putc(progress_debugport, '\r');
-
-	while ((c = *s++) != 0)
-		serial_putc(progress_debugport, c);
-
-	serial_putc(progress_debugport, '\n');
-	serial_putc(progress_debugport, '\r');
-}
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
diff --git a/arch/ppc/syslib/gen550_kgdb.c b/arch/ppc/syslib/gen550_kgdb.c
deleted file mode 100644
index 987cc0414e6e..000000000000
--- a/arch/ppc/syslib/gen550_kgdb.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Generic 16550 kgdb support intended to be useful on a variety
- * of platforms.  To enable this support, it is necessary to set
- * the CONFIG_GEN550 option.  Any virtual mapping of the serial
- * port(s) to be used can be accomplished by setting
- * ppc_md.early_serial_map to a platform-specific mapping function.
- *
- * Adapted from ppc4xx_kgdb.c.
- *
- * Author: Matt Porter <mporter@kernel.crashing.org>
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-
-extern unsigned long serial_init(int, void *);
-extern unsigned long serial_getc(unsigned long);
-extern unsigned long serial_putc(unsigned long, unsigned char);
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#elif defined(CONFIG_KGDB_TTYS2)
-#define KGDB_PORT 2
-#elif defined(CONFIG_KGDB_TTYS3)
-#define KGDB_PORT 3
-#else
-#error "invalid kgdb_tty port"
-#endif
-
-static volatile unsigned int kgdb_debugport;
-
-void putDebugChar(unsigned char c)
-{
-	if (kgdb_debugport == 0)
-		kgdb_debugport = serial_init(KGDB_PORT, NULL);
-
-	serial_putc(kgdb_debugport, c);
-}
-
-int getDebugChar(void)
-{
-	if (kgdb_debugport == 0)
-		kgdb_debugport = serial_init(KGDB_PORT, NULL);
-
-	return(serial_getc(kgdb_debugport));
-}
-
-void kgdb_interruptible(int enable)
-{
-	return;
-}
-
-void putDebugString(char* str)
-{
-	while (*str != '\0') {
-		putDebugChar(*str);
-		str++;
-	}
-	putDebugChar('\r');
-	return;
-}
-
-/*
- * Note: gen550_init() must be called already on the port we are going
- * to use.
- */
-void
-gen550_kgdb_map_scc(void)
-{
-	printk(KERN_DEBUG "kgdb init\n");
-	if (ppc_md.early_serial_map)
-		ppc_md.early_serial_map();
-	kgdb_debugport = serial_init(KGDB_PORT, NULL);
-}
diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c
deleted file mode 100644
index 3b4fcca5d1e1..000000000000
--- a/arch/ppc/syslib/gt64260_pic.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * Interrupt controller support for Galileo's GT64260.
- *
- * Author: Chris Zankel <source@mvista.com>
- * Modified by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on sources from Rabeeh Khoury / Galileo Technology
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file contains the specific functions to support the GT64260
- * interrupt controller.
- *
- * The GT64260 has two main interrupt registers (high and low) that
- * summarizes the interrupts generated by the units of the GT64260.
- * Each bit is assigned to an interrupt number, where the low register
- * are assigned from IRQ0 to IRQ31 and the high cause register
- * from IRQ32 to IRQ63
- * The GPP (General Purpose Port) interrupts are assigned from IRQ64 (GPP0)
- * to IRQ95 (GPP31).
- * get_irq() returns the lowest interrupt number that is currently asserted.
- *
- * Note:
- *  - This driver does not initialize the GPP when used as an interrupt
- *    input.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-#define CPU_INTR_STR	"gt64260 cpu interface error"
-#define PCI0_INTR_STR	"gt64260 pci 0 error"
-#define PCI1_INTR_STR	"gt64260 pci 1 error"
-
-/* ========================== forward declaration ========================== */
-
-static void gt64260_unmask_irq(unsigned int);
-static void gt64260_mask_irq(unsigned int);
-
-/* ========================== local declarations =========================== */
-
-struct hw_interrupt_type gt64260_pic = {
-	.typename = " gt64260_pic ",
-	.enable   = gt64260_unmask_irq,
-	.disable  = gt64260_mask_irq,
-	.ack      = gt64260_mask_irq,
-	.end      = gt64260_unmask_irq,
-};
-
-u32 gt64260_irq_base = 0;	/* GT64260 handles the next 96 IRQs from here */
-
-static struct mv64x60_handle bh;
-
-/* gt64260_init_irq()
- *
- *  This function initializes the interrupt controller. It assigns
- *  all interrupts from IRQ0 to IRQ95 to the gt64260 interrupt controller.
- *
- * Note:
- *  We register all GPP inputs as interrupt source, but disable them.
- */
-void __init
-gt64260_init_irq(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("gt64260_init_irq: enter", 0x0);
-
-	bh.v_base = mv64x60_get_bridge_vbase();
-
-	ppc_cached_irq_mask[0] = 0;
-	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
-	ppc_cached_irq_mask[2] = 0;
-
-	/* disable all interrupts and clear current interrupts */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
-	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO, ppc_cached_irq_mask[0]);
-	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI, ppc_cached_irq_mask[1]);
-
-	/* use the gt64260 for all (possible) interrupt sources */
-	for (i = gt64260_irq_base; i < (gt64260_irq_base + 96); i++)
-		irq_desc[i].chip = &gt64260_pic;
-
-	if (ppc_md.progress)
-		ppc_md.progress("gt64260_init_irq: exit", 0x0);
-}
-
-/*
- * gt64260_get_irq()
- *
- *  This function returns the lowest interrupt number of all interrupts that
- *  are currently asserted.
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  int	<interrupt number> or -2 (bogus interrupt)
- */
-int
-gt64260_get_irq(void)
-{
-	int irq;
-	int irq_gpp;
-
-	irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_LO);
-	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
-
-	if (irq == -1) {
-		irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_HI);
-		irq = __ilog2((irq & 0x0f000db7) & ppc_cached_irq_mask[1]);
-
-		if (irq == -1)
-			irq = -2; /* bogus interrupt, should never happen */
-		else {
-			if (irq >= 24) {
-				irq_gpp = mv64x60_read(&bh,
-					MV64x60_GPP_INTR_CAUSE);
-				irq_gpp = __ilog2(irq_gpp &
-					ppc_cached_irq_mask[2]);
-
-				if (irq_gpp == -1)
-					irq = -2;
-				else {
-					irq = irq_gpp + 64;
-					mv64x60_write(&bh,
-						MV64x60_GPP_INTR_CAUSE,
-						~(1 << (irq - 64)));
-				}
-			} else
-				irq += 32;
-		}
-	}
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-
-	if (irq < 0)
-		return (irq);
-	else
-		return (gt64260_irq_base + irq);
-}
-
-/* gt64260_unmask_irq()
- *
- *  This function enables an interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-gt64260_unmask_irq(unsigned int irq)
-{
-	irq -= gt64260_irq_base;
-
-	if (irq > 31)
-		if (irq > 63) /* unmask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] |= (1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-/* gt64260_mask_irq()
- *
- *  This function disables the requested interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-gt64260_mask_irq(unsigned int irq)
-{
-	irq -= gt64260_irq_base;
-
-	if (irq > 31)
-		if (irq > 63) /* mask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] &= ~(1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-static irqreturn_t
-gt64260_cpu_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "gt64260_cpu_error_int_handler: %s 0x%08x\n",
-		"Error on CPU interface - Cause regiser",
-		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
-	printk(KERN_ERR "\tCPU error register dump:\n");
-	printk(KERN_ERR "\tAddress low  0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress high 0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData low     0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
-	printk(KERN_ERR "\tData high    0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-gt64260_pci_error_int_handler(int irq, void *dev_id)
-{
-	u32 val;
-	unsigned int pci_bus = (unsigned int)dev_id;
-
-	if (pci_bus == 0) {	/* Error on PCI 0 */
-		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"gt64260_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
-	}
-	if (pci_bus == 1) {	/* Error on PCI 1 */
-		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"gt64260_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init
-gt64260_register_hdlrs(void)
-{
-	int rc;
-
-	/* Register CPU interface error interrupt handler */
-	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR,
-		gt64260_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, 0)))
-		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
-
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000fe);
-
-	/* Register PCI 0 error interrupt handler */
-	if ((rc = request_irq(MV64360_IRQ_PCI0, gt64260_pci_error_int_handler,
-		    IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
-		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0x003c0c24);
-
-	/* Register PCI 1 error interrupt handler */
-	if ((rc = request_irq(MV64360_IRQ_PCI1, gt64260_pci_error_int_handler,
-		    IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
-		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0x003c0c24);
-
-	return 0;
-}
-
-arch_initcall(gt64260_register_hdlrs);
diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c
deleted file mode 100644
index 45b797b3a336..000000000000
--- a/arch/ppc/syslib/harrier.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Motorola MCG Harrier northbridge/memory controller support
- *
- * Author: Dale Farnsworth
- *         dale.farnsworth@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/harrier_defs.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/harrier.h>
-
-/* define defaults for inbound windows */
-#define HARRIER_ITAT_DEFAULT		(HARRIER_ITAT_ENA | \
-					 HARRIER_ITAT_MEM | \
-					 HARRIER_ITAT_WPE | \
-					 HARRIER_ITAT_GBL)
-
-#define HARRIER_MPAT_DEFAULT		(HARRIER_ITAT_ENA | \
-					 HARRIER_ITAT_MEM | \
-					 HARRIER_ITAT_WPE | \
-					 HARRIER_ITAT_GBL)
-
-/*
- * Initialize the inbound window size on a non-monarch harrier.
- */
-void __init harrier_setup_nonmonarch(uint ppc_reg_base, uint in0_size)
-{
-	u16 temps;
-	u32 temp;
-
-	if (in0_size > HARRIER_ITSZ_2GB) {
-		printk
-		    ("harrier_setup_nonmonarch: Invalid window size code %d\n",
-		     in0_size);
-		return;
-	}
-
-	/* Clear the PCI memory enable bit. If we don't, then when the
-	 * inbound windows are enabled below, the corresponding BARs will be
-	 * "live" and start answering to PCI memory reads from their default
-	 * addresses (0x0), which overlap with system RAM.
-	 */
-	temps = in_le16((u16 *) (ppc_reg_base +
-				 HARRIER_XCSR_CONFIG(PCI_COMMAND)));
-	temps &= ~(PCI_COMMAND_MEMORY);
-	out_le16((u16 *) (ppc_reg_base + HARRIER_XCSR_CONFIG(PCI_COMMAND)),
-		 temps);
-
-	/* Setup a non-prefetchable inbound window */
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_ITSZ0_OFF)), in0_size);
-
-	temp = in_le32((u32 *) (ppc_reg_base +
-				HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)));
-	temp &= ~HARRIER_ITAT_PRE;
-	temp |= HARRIER_ITAT_DEFAULT;
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)), temp);
-
-	/* Enable the message passing block */
-	temp = in_le32((u32 *) (ppc_reg_base +
-				HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)));
-	temp |= HARRIER_MPAT_DEFAULT;
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)), temp);
-}
-
-void __init harrier_release_eready(uint ppc_reg_base)
-{
-	ulong temp;
-
-	/*
-	 * Set EREADY to allow the line to be pulled up after everyone is
-	 * ready.
-	 */
-	temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
-	temp |= HARRIER_EREADY;
-	out_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF), temp);
-}
-
-void __init harrier_wait_eready(uint ppc_reg_base)
-{
-	ulong temp;
-
-	/*
-	 * Poll the ERDYS line until it goes high to indicate that all
-	 * non-monarch PrPMCs are ready for bus enumeration (or that there are
-	 * no PrPMCs present).
-	 */
-
-	/* FIXME: Add a timeout of some kind to prevent endless waits. */
-	do {
-
-		temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
-
-	} while (!(temp & HARRIER_ERDYS));
-}
-
-/*
- * Initialize the Motorola MCG Harrier host bridge.
- *
- * This means setting up the PPC bus to PCI memory and I/O space mappings,
- * setting the PCI memory space address of the MPIC (mapped straight
- * through), and ioremap'ing the mpic registers.
- * 'OpenPIC_Addr' will be set correctly by this routine.
- * This routine will not change the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
- * addresses and assumes that the mapping of PCI memory space back to system
- * memory is set up correctly by PPCBug.
- */
-int __init
-harrier_init(struct pci_controller *hose,
-	     uint ppc_reg_base,
-	     ulong processor_pci_mem_start,
-	     ulong processor_pci_mem_end,
-	     ulong processor_pci_io_start,
-	     ulong processor_pci_io_end, ulong processor_mpic_base)
-{
-	uint addr, offset;
-
-	/*
-	 * Some sanity checks...
-	 */
-	if (((processor_pci_mem_start & 0xffff0000) != processor_pci_mem_start)
-	    || ((processor_pci_io_start & 0xffff0000) !=
-		processor_pci_io_start)) {
-		printk("harrier_init: %s\n",
-		       "PPC to PCI mappings must start on 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end & 0x0000ffff) != 0x0000ffff) ||
-	    ((processor_pci_io_end & 0x0000ffff) != 0x0000ffff)) {
-		printk("harrier_init: PPC to PCI mappings %s\n",
-		       "must end just before a 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end - processor_pci_mem_start) !=
-	     (hose->mem_space.end - hose->mem_space.start)) ||
-	    ((processor_pci_io_end - processor_pci_io_start) !=
-	     (hose->io_space.end - hose->io_space.start))) {
-		printk("harrier_init: %s\n",
-		       "PPC and PCI memory or I/O space sizes don't match");
-		return -1;
-	}
-
-	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
-		printk("harrier_init: %s\n",
-		       "MPIC address must start on 256 KB boundary");
-		return -1;
-	}
-
-	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
-		printk("harrier_init: %s\n",
-		       "pci_dram_offset must be multiple of 64 KB");
-		return -1;
-	}
-
-	/*
-	 * Program the OTAD/OTOF registers to set up the PCI Mem & I/O
-	 * space mappings.  These are the mappings going from the processor to
-	 * the PCI bus.
-	 *
-	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
-	 *       because sanity check above ensures that they are properly
-	 *       aligned.
-	 */
-
-	/* Set up PPC->PCI Mem mapping */
-	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
-#ifdef CONFIG_HARRIER_STORE_GATHERING
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x9a;
-#else
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x92;
-#endif
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD0_OFF), addr);
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF0_OFF), offset);
-
-	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
-	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
-	offset = (hose->io_space.start - processor_pci_io_start) | 0x80;
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD1_OFF), addr);
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF1_OFF), offset);
-
-	/* Enable MPIC */
-	OpenPIC_Addr = (void *)processor_mpic_base;
-	addr = (processor_mpic_base >> 16) | 1;
-	out_be16((ushort *) (ppc_reg_base + HARRIER_MBAR_OFF), addr);
-	out_8((u_char *) (ppc_reg_base + HARRIER_MPIC_CSR_OFF),
-	      HARRIER_MPIC_OPI_ENABLE);
-
-	return 0;
-}
-
-/*
- * Find the amount of RAM present.
- * This assumes that PPCBug has initialized the memory controller (SMC)
- * on the Harrier correctly (i.e., it does no sanity checking).
- * It also assumes that the memory base registers are set to configure the
- * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
- * however, RAM base registers can be skipped (e.g. A, B, C are set,
- * D is skipped but E is set is okay).
- */
-#define	MB	(1024*1024UL)
-
-static uint harrier_size_table[] __initdata = {
-	0 * MB,			/* 0 ==>    0 MB */
-	32 * MB,		/* 1 ==>   32 MB */
-	64 * MB,		/* 2 ==>   64 MB */
-	64 * MB,		/* 3 ==>   64 MB */
-	128 * MB,		/* 4 ==>  128 MB */
-	128 * MB,		/* 5 ==>  128 MB */
-	128 * MB,		/* 6 ==>  128 MB */
-	256 * MB,		/* 7 ==>  256 MB */
-	256 * MB,		/* 8 ==>  256 MB */
-	256 * MB,		/* 9 ==>  256 MB */
-	512 * MB,		/* a ==>  512 MB */
-	512 * MB,		/* b ==>  512 MB */
-	512 * MB,		/* c ==>  512 MB */
-	1024 * MB,		/* d ==> 1024 MB */
-	1024 * MB,		/* e ==> 1024 MB */
-	2048 * MB,		/* f ==> 2048 MB */
-};
-
-/*
- * *** WARNING: You MUST have a BAT set up to map in the XCSR regs ***
- *
- * Read the memory controller's registers to determine the amount of system
- * memory.  Assumes that the memory controller registers are already mapped
- * into virtual memory--too early to use ioremap().
- */
-unsigned long __init harrier_get_mem_size(uint xcsr_base)
-{
-	ulong last_addr;
-	int i;
-	uint vend_dev_id;
-	uint *size_table;
-	uint val;
-	uint *csrp;
-	uint size;
-	int size_table_entries;
-
-	vend_dev_id = in_be32((uint *) xcsr_base + PCI_VENDOR_ID);
-
-	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
-		printk("harrier_get_mem_size: %s (0x%x)\n",
-		       "Not a Motorola Memory Controller", vend_dev_id);
-		return 0;
-	}
-
-	vend_dev_id &= 0x0000ffff;
-
-	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HARRIER) {
-		size_table = harrier_size_table;
-		size_table_entries = sizeof(harrier_size_table) /
-		    sizeof(harrier_size_table[0]);
-	} else {
-		printk("harrier_get_mem_size: %s (0x%x)\n",
-		       "Not a Harrier", vend_dev_id);
-		return 0;
-	}
-
-	last_addr = 0;
-
-	csrp = (uint *) (xcsr_base + HARRIER_SDBA_OFF);
-	for (i = 0; i < 8; i++) {
-		val = in_be32(csrp++);
-
-		if (val & 0x100) {	/* If enabled */
-			size = val >> HARRIER_SDB_SIZE_SHIFT;
-			size &= HARRIER_SDB_SIZE_MASK;
-			if (size >= size_table_entries) {
-				break;	/* Register not set correctly */
-			}
-			size = size_table[size];
-
-			val &= ~(size - 1);
-			val += size;
-
-			if (val > last_addr) {
-				last_addr = val;
-			}
-		}
-	}
-
-	return last_addr;
-}
diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c
deleted file mode 100644
index 86821d8753ed..000000000000
--- a/arch/ppc/syslib/hawk_common.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-
-/*
- * The Falcon/Raven and HAWK has 4 sets of registers:
- *   1) PPC Registers which define the mappings from PPC bus to PCI bus,
- *      etc.
- *   2) PCI Registers which define the mappings from PCI bus to PPC bus and the
- *      MPIC base address.
- *   3) MPIC registers.
- *   4) System Memory Controller (SMC) registers.
- */
-
-/*
- * Initialize the Motorola MCG Raven or HAWK host bridge.
- *
- * This means setting up the PPC bus to PCI memory and I/O space mappings,
- * setting the PCI memory space address of the MPIC (mapped straight
- * through), and ioremap'ing the mpic registers.
- * This routine will set the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
- * addresses based on the PCI I/O address that is passed in.
- * 'OpenPIC_Addr' will be set correctly by this routine.
- */
-int __init
-hawk_init(struct pci_controller *hose,
-	     uint ppc_reg_base,
-	     ulong processor_pci_mem_start,
-	     ulong processor_pci_mem_end,
-	     ulong processor_pci_io_start,
-	     ulong processor_pci_io_end,
-	     ulong processor_mpic_base)
-{
-	uint		addr, offset;
-
-	/*
-	 * Some sanity checks...
-	 */
-	if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
-	    ((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
-		printk("hawk_init: %s\n",
-			"PPC to PCI mappings must start on 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end  &0x0000ffff) != 0x0000ffff) ||
-	    ((processor_pci_io_end   &0x0000ffff) != 0x0000ffff)) {
-		printk("hawk_init: PPC to PCI mappings %s\n",
-			"must end just before a 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end - processor_pci_mem_start) !=
-	     (hose->mem_space.end - hose->mem_space.start)) ||
-	    ((processor_pci_io_end - processor_pci_io_start) !=
-	     (hose->io_space.end - hose->io_space.start))) {
-		printk("hawk_init: %s\n",
-			"PPC and PCI memory or I/O space sizes don't match");
-		return -1;
-	}
-
-	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
-		printk("hawk_init: %s\n",
-			"MPIC address must start on 256 MB boundary");
-		return -1;
-	}
-
-	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
-		printk("hawk_init: %s\n",
-			"pci_dram_offset must be multiple of 64 KB");
-		return -1;
-	}
-
-	/*
-	 * Disable previous PPC->PCI mappings.
-	 */
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF2_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), 0x00000000);
-
-	/*
-	 * Program the XSADD/XSOFF registers to set up the PCI Mem & I/O
-	 * space mappings.  These are the mappings going from the processor to
-	 * the PCI bus.
-	 *
-	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
-	 *	 because sanity check above ensures that they are properly
-	 *	 aligned.
-	 */
-
-	/* Set up PPC->PCI Mem mapping */
-	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xd2;
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD0_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), offset);
-
-	/* Set up PPC->MPIC mapping on the bridge */
-	addr = processor_mpic_base |
-	        (((processor_mpic_base + HAWK_MPIC_SIZE) >> 16) - 1);
-	/* No write posting for this PCI Mem space */
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xc2;
-
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD1_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), offset);
-
-	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
-	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
-	offset = (hose->io_space.start - processor_pci_io_start) | 0xc0;
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD3_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), offset);
-
-	hose->io_base_virt = (void *)ioremap(processor_pci_io_start,
-			(processor_pci_io_end - processor_pci_io_start + 1));
-
-	/*
-	 * Set up the indirect method of accessing PCI config space.
-	 * The PCI config addr/data pair based on start addr of PCI I/O space.
-	 */
-	setup_indirect_pci(hose,
-			   processor_pci_io_start + HAWK_PCI_CONFIG_ADDR_OFF,
-			   processor_pci_io_start + HAWK_PCI_CONFIG_DATA_OFF);
-
-	/*
-	 * Disable previous PCI->PPC mappings.
-	 */
-
-	/* XXXX Put in mappings from PCI bus to processor bus XXXX */
-
-	/*
-	 * Disable MPIC response to PCI I/O space (BAR 0).
-	 * Make MPIC respond to PCI Mem space at specified address.
-	 * (BAR 1).
-	 */
-	early_write_config_dword(hose,
-			         0,
-			         PCI_DEVFN(0,0),
-			         PCI_BASE_ADDRESS_0,
-			         0x00000000 | 0x1);
-
-	early_write_config_dword(hose,
-			         0,
-			         PCI_DEVFN(0,0),
-			         PCI_BASE_ADDRESS_1,
-			         (processor_mpic_base -
-				 processor_pci_mem_start + 
-				 hose->mem_space.start) | 0x0);
-
-	/* Map MPIC into virtual memory */
-	OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE);
-
-	return 0;
-}
-
-/*
- * Find the amount of RAM present.
- * This assumes that PPCBug has initialized the memory controller (SMC)
- * on the Falcon/HAWK correctly (i.e., it does no sanity checking).
- * It also assumes that the memory base registers are set to configure the
- * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
- * however, RAM base registers can be skipped (e.g. A, B, C are set,
- * D is skipped but E is set is okay).
- */
-#define	MB	(1024*1024)
-
-static uint reg_offset_table[] __initdata = {
-	HAWK_SMC_RAM_A_SIZE_REG_OFF,
-	HAWK_SMC_RAM_B_SIZE_REG_OFF,
-	HAWK_SMC_RAM_C_SIZE_REG_OFF,
-	HAWK_SMC_RAM_D_SIZE_REG_OFF,
-	HAWK_SMC_RAM_E_SIZE_REG_OFF,
-	HAWK_SMC_RAM_F_SIZE_REG_OFF,
-	HAWK_SMC_RAM_G_SIZE_REG_OFF,
-	HAWK_SMC_RAM_H_SIZE_REG_OFF
-};
-
-static uint falcon_size_table[] __initdata = {
-	   0 * MB, /* 0 ==>    0 MB */
-	  16 * MB, /* 1 ==>   16 MB */
-	  32 * MB, /* 2 ==>   32 MB */
-	  64 * MB, /* 3 ==>   64 MB */
-	 128 * MB, /* 4 ==>  128 MB */
-	 256 * MB, /* 5 ==>  256 MB */
-        1024 * MB, /* 6 ==> 1024 MB (1 GB) */
-};
-
-static uint hawk_size_table[] __initdata = {
-	  0 * MB, /* 0 ==>    0 MB */
-	 32 * MB, /* 1 ==>   32 MB */
-	 64 * MB, /* 2 ==>   64 MB */
-	 64 * MB, /* 3 ==>   64 MB */
-	128 * MB, /* 4 ==>  128 MB */
-	128 * MB, /* 5 ==>  128 MB */
-	128 * MB, /* 6 ==>  128 MB */
-	256 * MB, /* 7 ==>  256 MB */
-	256 * MB, /* 8 ==>  256 MB */
-	512 * MB, /* 9 ==>  512 MB */
-};
-
-/*
- * *** WARNING: You MUST have a BAT set up to map in the SMC regs ***
- *
- * Read the memory controller's registers to determine the amount of system
- * memory.  Assumes that the memory controller registers are already mapped
- * into virtual memory--too early to use ioremap().
- */
-unsigned long __init
-hawk_get_mem_size(uint smc_base)
-{
-	unsigned long	total;
-	int		i, size_table_entries, reg_limit;
-	uint		vend_dev_id;
-	uint		*size_table;
-	u_char		val;
-
-
-	vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
-
-	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
-		printk("hawk_get_mem_size: %s (0x%x)\n",
-			"Not a Motorola Memory Controller", vend_dev_id);
-		return 0;
-	}
-
-	vend_dev_id &= 0x0000ffff;
-
-	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_FALCON) {
-		size_table = falcon_size_table;
-		size_table_entries = sizeof(falcon_size_table) /
-				     sizeof(falcon_size_table[0]);
-
-		reg_limit = FALCON_SMC_REG_COUNT;
-	}
-	else if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HAWK) {
-		size_table = hawk_size_table;
-		size_table_entries = sizeof(hawk_size_table) /
-				     sizeof(hawk_size_table[0]);
-		reg_limit = HAWK_SMC_REG_COUNT;
-	}
-	else {
-		printk("hawk_get_mem_size: %s (0x%x)\n",
-			"Not a Falcon or HAWK", vend_dev_id);
-		return 0;
-	}
-
-	total = 0;
-
-	/* Check every reg because PPCBug may skip some */
-	for (i=0; i<reg_limit; i++) {
-		val = in_8((u_char *)(smc_base + reg_offset_table[i]));
-
-		if (val & 0x80) {	/* If enabled */
-			val &= 0x0f;
-
-			/* Don't go past end of size_table */
-			if (val < size_table_entries) {
-				total += size_table[val];
-			}
-			else {	/* Register not set correctly */
-				break;
-			}
-		}
-	}
-
-	return total;
-}
-
-int __init
-hawk_mpic_init(unsigned int pci_mem_offset)
-{
-	unsigned short	devid;
-	unsigned int	pci_membase;
-
-	/* Check the first PCI device to see if it is a Raven or Hawk. */
-	early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
-
-	switch (devid) {
-	case PCI_DEVICE_ID_MOTOROLA_RAVEN:
-	case PCI_DEVICE_ID_MOTOROLA_HAWK:
-		break;
-	default:
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Read the memory base register. */
-	early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
-
-	if (pci_membase == 0) {
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Map the MPIC registers to virtual memory. */
-	OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
-
-	return 0;
-}
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
deleted file mode 100644
index 559f27c6aefe..000000000000
--- a/arch/ppc/syslib/i8259.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * i8259 interrupt controller driver.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/i8259.h>
-
-static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
-
-static unsigned char cached_8259[2] = { 0xff, 0xff };
-#define cached_A1 (cached_8259[0])
-#define cached_21 (cached_8259[1])
-
-static DEFINE_SPINLOCK(i8259_lock);
-
-static int i8259_pic_irq_offset;
-
-/*
- * Acknowledge the IRQ using either the PCI host bridge's interrupt
- * acknowledge feature or poll.  How i8259_init() is called determines
- * which is called.  It should be noted that polling is broken on some
- * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
- */
-int i8259_irq(void)
-{
-	int irq;
-
-	spin_lock(&i8259_lock);
-
-	/* Either int-ack or poll for the IRQ */
-	if (pci_intack)
-		irq = readb(pci_intack);
-	else {
-		/* Perform an interrupt acknowledge cycle on controller 1. */
-		outb(0x0C, 0x20);		/* prepare for poll */
-		irq = inb(0x20) & 7;
-		if (irq == 2 ) {
-			/*
-			 * Interrupt is cascaded so perform interrupt
-			 * acknowledge on controller 2.
-			 */
-			outb(0x0C, 0xA0);	/* prepare for poll */
-			irq = (inb(0xA0) & 7) + 8;
-		}
-	}
-
-	if (irq == 7) {
-		/*
-		 * This may be a spurious interrupt.
-		 *
-		 * Read the interrupt status register (ISR). If the most
-		 * significant bit is not set then there is no valid
-		 * interrupt.
-		 */
-		if (!pci_intack)
-			outb(0x0B, 0x20);	/* ISR register */
-		if(~inb(0x20) & 0x80)
-			irq = -1;
-	}
-
-	spin_unlock(&i8259_lock);
-	return irq + i8259_pic_irq_offset;
-}
-
-static void i8259_mask_and_ack_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr > 7) {
-		cached_A1 |= 1 << (irq_nr-8);
-		inb(0xA1); 	/* DUMMY */
-		outb(cached_A1, 0xA1);
-		outb(0x20, 0xA0);	/* Non-specific EOI */
-		outb(0x20, 0x20);	/* Non-specific EOI to cascade */
-	} else {
-		cached_21 |= 1 << irq_nr;
-		inb(0x21); 	/* DUMMY */
-		outb(cached_21, 0x21);
-		outb(0x20, 0x20);	/* Non-specific EOI */
-	}
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_set_irq_mask(int irq_nr)
-{
-	outb(cached_A1,0xA1);
-	outb(cached_21,0x21);
-}
-
-static void i8259_mask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr < 8)
-		cached_21 |= 1 << irq_nr;
-	else
-		cached_A1 |= 1 << (irq_nr-8);
-	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_unmask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr < 8)
-		cached_21 &= ~(1 << irq_nr);
-	else
-		cached_A1 &= ~(1 << (irq_nr-8));
-	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static struct irq_chip i8259_pic = {
-	.typename	= " i8259    ",
-	.mask		= i8259_mask_irq,
-	.disable	= i8259_mask_irq,
-	.unmask		= i8259_unmask_irq,
-	.mask_ack	= i8259_mask_and_ack_irq,
-};
-
-static struct resource pic1_iores = {
-	.name = "8259 (master)",
-	.start = 0x20,
-	.end = 0x21,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct resource pic2_iores = {
-	.name = "8259 (slave)",
-	.start = 0xa0,
-	.end = 0xa1,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct resource pic_edgectrl_iores = {
-	.name = "8259 edge control",
-	.start = 0x4d0,
-	.end = 0x4d1,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct irqaction i8259_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "82c59 secondary cascade",
-};
-
-/*
- * i8259_init()
- * intack_addr - PCI interrupt acknowledge (real) address which will return
- *               the active irq from the 8259
- */
-void __init i8259_init(unsigned long intack_addr, int offset)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	i8259_pic_irq_offset = offset;
-
-	/* init master interrupt controller */
-	outb(0x11, 0x20); /* Start init sequence */
-	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
-	outb(0x01, 0x21); /* Select 8086 mode */
-
-	/* init slave interrupt controller */
-	outb(0x11, 0xA0); /* Start init sequence */
-	outb(0x08, 0xA1); /* Vector base */
-	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
-	outb(0x01, 0xA1); /* Select 8086 mode */
-
-	/* always read ISR */
-	outb(0x0B, 0x20);
-	outb(0x0B, 0xA0);
-
-	/* Mask all interrupts */
-	outb(cached_A1, 0xA1);
-	outb(cached_21, 0x21);
-
-	spin_unlock_irqrestore(&i8259_lock, flags);
-
-	for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) {
-		set_irq_chip_and_handler(offset + i, &i8259_pic,
-					 handle_level_irq);
-		irq_desc[offset + i].status |= IRQ_LEVEL;
-	}
-
-	/* reserve our resources */
-	setup_irq(offset + 2, &i8259_irqaction);
-	request_resource(&ioport_resource, &pic1_iores);
-	request_resource(&ioport_resource, &pic2_iores);
-	request_resource(&ioport_resource, &pic_edgectrl_iores);
-
-	if (intack_addr != 0)
-		pci_intack = ioremap(intack_addr, 1);
-
-}
diff --git a/arch/ppc/syslib/ibm440gp_common.c b/arch/ppc/syslib/ibm440gp_common.c
deleted file mode 100644
index a3927ec9b5d7..000000000000
--- a/arch/ppc/syslib/ibm440gp_common.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * PPC440GP system library
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/types.h>
-#include <asm/reg.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-
-/*
- * Calculate 440GP clocks
- */
-void __init ibm440gp_get_clocks(struct ibm44x_clocks* p,
-				unsigned int sys_clk,
-				unsigned int ser_clk)
-{
-	u32 cpc0_sys0 = mfdcr(DCRN_CPC0_SYS0);
-	u32 cpc0_cr0 = mfdcr(DCRN_CPC0_CR0);
-	u32 opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
-	u32 epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
-
-	if (cpc0_sys0 & 0x2){
-		/* Bypass system PLL */
-		p->cpu = p->plb = sys_clk;
-	}
-	else {
-		u32 fbdv, fwdva, fwdvb, m, vco;
-
-		fbdv = (cpc0_sys0 >> 18) & 0x0f;
-		if (!fbdv)
-			fbdv = 16;
-
-		fwdva = 8 - ((cpc0_sys0 >> 15) & 0x7);
-		fwdvb = 8 - ((cpc0_sys0 >> 12) & 0x7);
-
-    		/* Feedback path */	
-		if (cpc0_sys0 & 0x00000080){
-			/* PerClk */
-			m = fwdvb * opdv * epdv;
-		}
-		else {
-			/* CPU clock */
-			m = fbdv * fwdva;
-    		}
-		vco = sys_clk * m;
-		p->cpu = vco / fwdva;
-		p->plb = vco / fwdvb;
-	}
-
-	p->opb = p->plb / opdv;
-	p->ebc = p->opb / epdv;
-
-	if (cpc0_cr0 & 0x00400000){
-		/* External UART clock */
-		p->uart0 = p->uart1 = ser_clk;
-	}
-	else {
-		/* Internal UART clock */
-    		u32 uart_div = ((cpc0_cr0 >> 16) & 0x1f) + 1;
-		p->uart0 = p->uart1 = p->plb / uart_div;
-	}
-}
diff --git a/arch/ppc/syslib/ibm440gp_common.h b/arch/ppc/syslib/ibm440gp_common.h
deleted file mode 100644
index 94d7835038ad..000000000000
--- a/arch/ppc/syslib/ibm440gp_common.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * PPC440GP system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440GP_COMMON_H
-#define __PPC_SYSLIB_IBM440GP_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/init.h>
-#include <syslib/ibm44x_common.h>
-
-/*
- * Please, refer to the Figure 13.1 in 440GP user manual
- *
- * if internal UART clock is used, ser_clk is ignored
- */
-void ibm440gp_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
-	unsigned int ser_clk) __init;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440GP_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
deleted file mode 100644
index 6ad52f4a26e1..000000000000
--- a/arch/ppc/syslib/ibm440gx_common.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * PPC440GX system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 - 2006 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <syslib/ibm440gx_common.h>
-
-/*
- * Calculate 440GX clocks
- */
-static inline u32 __fix_zero(u32 v, u32 def){
-	return v ? v : def;
-}
-
-void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk,
-	unsigned int ser_clk)
-{
-	u32 pllc  = CPR_READ(DCRN_CPR_PLLC);
-	u32 plld  = CPR_READ(DCRN_CPR_PLLD);
-	u32 uart0 = SDR_READ(DCRN_SDR_UART0);
-	u32 uart1 = SDR_READ(DCRN_SDR_UART1);
-#ifdef CONFIG_440EP
-	u32 uart2 = SDR_READ(DCRN_SDR_UART2);
-	u32 uart3 = SDR_READ(DCRN_SDR_UART3);
-#endif
-
-	/* Dividers */
-	u32 fbdv   = __fix_zero((plld >> 24) & 0x1f, 32);
-	u32 fwdva  = __fix_zero((plld >> 16) & 0xf, 16);
-	u32 fwdvb  = __fix_zero((plld >> 8) & 7, 8);
-	u32 lfbdv  = __fix_zero(plld & 0x3f, 64);
-	u32 pradv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMAD) >> 24) & 7, 8);
-	u32 prbdv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMBD) >> 24) & 7, 8);
-	u32 opbdv0 = __fix_zero((CPR_READ(DCRN_CPR_OPBD) >> 24) & 3, 4);
-	u32 perdv0 = __fix_zero((CPR_READ(DCRN_CPR_PERD) >> 24) & 3, 4);
-
-	/* Input clocks for primary dividers */
-	u32 clk_a, clk_b;
-
-	if (pllc & 0x40000000){
-		u32 m;
-
-		/* Feedback path */
-		switch ((pllc >> 24) & 7){
-		case 0:
-			/* PLLOUTx */
-			m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
-			break;
-		case 1:
-			/* CPU */
-			m = fwdva * pradv0;
-			break;
-		case 5:
-			/* PERClk */
-			m = fwdvb * prbdv0 * opbdv0 * perdv0;
-			break;
-		default:
-			printk(KERN_EMERG "invalid PLL feedback source\n");
-			goto bypass;
-		}
-		m *= fbdv;
-		p->vco = sys_clk * m;
-		clk_a = p->vco / fwdva;
-		clk_b = p->vco / fwdvb;
-	}
-	else {
-bypass:
-		/* Bypass system PLL */
-		p->vco = 0;
-		clk_a = clk_b = sys_clk;
-	}
-
-	p->cpu = clk_a / pradv0;
-	p->plb = clk_b / prbdv0;
-	p->opb = p->plb / opbdv0;
-	p->ebc = p->opb / perdv0;
-
-	/* UARTs clock */
-	if (uart0 & 0x00800000)
-		p->uart0 = ser_clk;
-	else
-		p->uart0 = p->plb / __fix_zero(uart0 & 0xff, 256);
-
-	if (uart1 & 0x00800000)
-		p->uart1 = ser_clk;
-	else
-		p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
-#ifdef CONFIG_440EP
-	if (uart2 & 0x00800000)
-		p->uart2 = ser_clk;
-	else
-		p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256);
-
-	if (uart3 & 0x00800000)
-		p->uart3 = ser_clk;
-	else
-		p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256);
-#endif
-}
-
-/* Issue L2C diagnostic command */
-static inline u32 l2c_diag(u32 addr)
-{
-	mtdcr(DCRN_L2C0_ADDR, addr);
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_DIAG);
-	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
-	return mfdcr(DCRN_L2C0_DATA);
-}
-
-static irqreturn_t l2c_error_handler(int irq, void* dev)
-{
-	u32 sr = mfdcr(DCRN_L2C0_SR);
-	if (sr & L2C_SR_CPE){
-		/* Read cache trapped address */
-		u32 addr = l2c_diag(0x42000000);
-		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", addr);
-	}
-	if (sr & L2C_SR_TPE){
-		/* Read tag trapped address */
-		u32 addr = l2c_diag(0x82000000) >> 16;
-		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", addr);
-	}
-
-	/* Clear parity errors */
-	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
-		mtdcr(DCRN_L2C0_ADDR, 0);
-		mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
-	} else
-		printk(KERN_EMERG "L2C: LRU error\n");
-
-	return IRQ_HANDLED;
-}
-
-/* Enable L2 cache */
-void __init ibm440gx_l2c_enable(void){
-	u32 r;
-	unsigned long flags;
-
-	/* Install error handler */
-	if (request_irq(87, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0){
-		printk(KERN_ERR "Cannot install L2C error handler, cache is not enabled\n");
-		return;
-	}
-
-	local_irq_save(flags);
-	asm volatile ("sync" ::: "memory");
-
-	/* Disable SRAM */
-	mtdcr(DCRN_SRAM0_DPC,   mfdcr(DCRN_SRAM0_DPC)   & ~SRAM_DPC_ENABLE);
-	mtdcr(DCRN_SRAM0_SB0CR, mfdcr(DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB1CR, mfdcr(DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB2CR, mfdcr(DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB3CR, mfdcr(DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
-
-	/* Enable L2_MODE without ICU/DCU */
-	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
-	r |= L2C_CFG_L2M | L2C_CFG_SS_256;
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	mtdcr(DCRN_L2C0_ADDR, 0);
-
-	/* Hardware Clear Command */
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_HCC);
-	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
-
-	/* Clear Cache Parity and Tag Errors */
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
-
-	/* Enable 64G snoop region starting at 0 */
-	r = mfdcr(DCRN_L2C0_SNP0) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
-	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
-	mtdcr(DCRN_L2C0_SNP0, r);
-
-	r = mfdcr(DCRN_L2C0_SNP1) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
-	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
-	mtdcr(DCRN_L2C0_SNP1, r);
-
-	asm volatile ("sync" ::: "memory");
-
-	/* Enable ICU/DCU ports */
-	r = mfdcr(DCRN_L2C0_CFG);
-	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM | L2C_CFG_TPEI
-		| L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
-	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
-		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	asm volatile ("sync; isync" ::: "memory");
-	local_irq_restore(flags);
-}
-
-/* Disable L2 cache */
-void __init ibm440gx_l2c_disable(void){
-	u32 r;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	asm volatile ("sync" ::: "memory");
-
-	/* Disable L2C mode */
-	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_L2M | L2C_CFG_ICU | L2C_CFG_DCU);
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	/* Enable SRAM */
-	mtdcr(DCRN_SRAM0_DPC, mfdcr(DCRN_SRAM0_DPC) | SRAM_DPC_ENABLE);
-	mtdcr(DCRN_SRAM0_SB0CR,
-	      SRAM_SBCR_BAS0 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB1CR,
-	      SRAM_SBCR_BAS1 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB2CR,
-	      SRAM_SBCR_BAS2 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB3CR,
-	      SRAM_SBCR_BAS3 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-
-	asm volatile ("sync; isync" ::: "memory");
-	local_irq_restore(flags);
-}
-
-void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p)
-{
-	/* Disable L2C on rev.A, rev.B and 800MHz version of rev.C,
-	   enable it on all other revisions
-	 */
-	if (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. A") == 0 ||
-			strcmp(cur_cpu_spec->cpu_name, "440GX Rev. B") == 0
-			|| (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C")
-				== 0 && p->cpu > 667000000))
-		ibm440gx_l2c_disable();
-	else
-		ibm440gx_l2c_enable();
-}
-
-int __init ibm440gx_get_eth_grp(void)
-{
-	return (SDR_READ(DCRN_SDR_PFC1) & DCRN_SDR_PFC1_EPS) >> DCRN_SDR_PFC1_EPS_SHIFT;
-}
-
-void __init ibm440gx_set_eth_grp(int group)
-{
-	SDR_WRITE(DCRN_SDR_PFC1, (SDR_READ(DCRN_SDR_PFC1) & ~DCRN_SDR_PFC1_EPS) | (group << DCRN_SDR_PFC1_EPS_SHIFT));
-}
-
-void __init ibm440gx_tah_enable(void)
-{
-	/* Enable TAH0 and TAH1 */
-	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
-			~DCRN_SDR_MFR_TAH0);
-	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
-			~DCRN_SDR_MFR_TAH1);
-}
-
-int ibm440gx_show_cpuinfo(struct seq_file *m){
-
-	u32 l2c_cfg = mfdcr(DCRN_L2C0_CFG);
-	const char* s;
-	if (l2c_cfg & L2C_CFG_L2M){
-	    switch (l2c_cfg & (L2C_CFG_ICU | L2C_CFG_DCU)){
-		case L2C_CFG_ICU: s = "I-Cache only";    break;
-		case L2C_CFG_DCU: s = "D-Cache only";    break;
-		default:	  s = "I-Cache/D-Cache"; break;
-	    }
-	}
-	else
-	    s = "disabled";
-
-	seq_printf(m, "L2-Cache\t: %s (0x%08x 0x%08x)\n", s,
-	    l2c_cfg, mfdcr(DCRN_L2C0_SR));
-
-	return 0;
-}
-
-void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4,
-				   unsigned long r5, unsigned long r6,
-				   unsigned long r7)
-{
-	/* Erratum 440_43 workaround, disable L1 cache parity checking */
-	if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") ||
-	    !strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F"))
-		mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC);
-
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-}
diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h
deleted file mode 100644
index 8d6f203e7a1d..000000000000
--- a/arch/ppc/syslib/ibm440gx_common.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * PPC440GX system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440GX_COMMON_H
-#define __PPC_SYSLIB_IBM440GX_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <syslib/ibm44x_common.h>
-
-/*
- * Please, refer to the Figure 14.1 in 440GX user manual
- *
- * if internal UART clock is used, ser_clk is ignored
- */
-void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
-	unsigned int ser_clk) __init;
-
-/* common 440GX platform init */
-void ibm440gx_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			    unsigned long r6, unsigned long r7) __init;
-
-/* Enable L2 cache */
-void ibm440gx_l2c_enable(void) __init;
-
-/* Disable L2 cache */
-void ibm440gx_l2c_disable(void) __init;
-
-/* Enable/disable L2 cache for a particular chip revision */
-void ibm440gx_l2c_setup(struct ibm44x_clocks*) __init;
-
-/* Get Ethernet Group */
-int ibm440gx_get_eth_grp(void) __init;
-
-/* Set Ethernet Group */
-void ibm440gx_set_eth_grp(int group) __init;
-
-/* Enable TAH devices */
-void ibm440gx_tah_enable(void) __init;
-
-/* Add L2C info to /proc/cpuinfo */
-int ibm440gx_show_cpuinfo(struct seq_file*);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440GX_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c
deleted file mode 100644
index 571f8bcf78e6..000000000000
--- a/arch/ppc/syslib/ibm440sp_common.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * PPC440SP/PPC440SPe system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-
-#include <asm/param.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/ppc4xx_pic.h>
-
-/*
- * Read the 440SP memory controller to get size of system memory.
- */
-unsigned long __init ibm440sp_find_end_of_memory(void)
-{
-	u32 i;
-	u32 mem_size = 0;
-
-	/* Read two bank sizes and sum */
-	for (i=0; i< MQ0_NUM_BANKS; i++)
-		switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
-			case MQ0_CONFIG_SIZE_8M:
-				mem_size += PPC44x_MEM_SIZE_8M;
-				break;
-			case MQ0_CONFIG_SIZE_16M:
-				mem_size += PPC44x_MEM_SIZE_16M;
-				break;
-			case MQ0_CONFIG_SIZE_32M:
-				mem_size += PPC44x_MEM_SIZE_32M;
-				break;
-			case MQ0_CONFIG_SIZE_64M:
-				mem_size += PPC44x_MEM_SIZE_64M;
-				break;
-			case MQ0_CONFIG_SIZE_128M:
-				mem_size += PPC44x_MEM_SIZE_128M;
-				break;
-			case MQ0_CONFIG_SIZE_256M:
-				mem_size += PPC44x_MEM_SIZE_256M;
-				break;
-			case MQ0_CONFIG_SIZE_512M:
-				mem_size += PPC44x_MEM_SIZE_512M;
-				break;
-			case MQ0_CONFIG_SIZE_1G:
-				mem_size += PPC44x_MEM_SIZE_1G;
-				break;
-			case MQ0_CONFIG_SIZE_2G:
-				mem_size += PPC44x_MEM_SIZE_2G;
-				break;
-			default:
-				break;
-		}
-	return mem_size;
-}
diff --git a/arch/ppc/syslib/ibm440sp_common.h b/arch/ppc/syslib/ibm440sp_common.h
deleted file mode 100644
index 8077bf8ed118..000000000000
--- a/arch/ppc/syslib/ibm440sp_common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * PPC440SP system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440SP_COMMON_H
-#define __PPC_SYSLIB_IBM440SP_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-extern unsigned long __init ibm440sp_find_end_of_memory(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440SP_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c
deleted file mode 100644
index 01f99b4a6649..000000000000
--- a/arch/ppc/syslib/ibm44x_common.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * PPC44x system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/time.h>
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-#include <linux/initrd.h>
-
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/param.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-
-/* Global Variables */
-bd_t __res;
-
-phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
-{
-	phys_addr_t page_4gb = 0;
-
-        /*
-	 * Trap the least significant 32-bit portions of an
-	 * address in the 440's 36-bit address space.  Fix
-	 * them up with the appropriate ERPN
-	 */
-	if ((addr >= PPC44x_IO_LO) && (addr <= PPC44x_IO_HI))
-		page_4gb = PPC44x_IO_PAGE;
-	else if ((addr >= PPC44x_PCI0CFG_LO) && (addr <= PPC44x_PCI0CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-#ifdef CONFIG_440SP
-	else if ((addr >= PPC44x_PCI1CFG_LO) && (addr <= PPC44x_PCI1CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-	else if ((addr >= PPC44x_PCI2CFG_LO) && (addr <= PPC44x_PCI2CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-#endif
-	else if ((addr >= PPC44x_PCIMEM_LO) && (addr <= PPC44x_PCIMEM_HI))
-		page_4gb = PPC44x_PCIMEM_PAGE;
-
-	return (page_4gb | addr);
-};
-EXPORT_SYMBOL(fixup_bigphys_addr);
-
-void __init ibm44x_calibrate_decr(unsigned int freq)
-{
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-}
-
-extern void abort(void);
-
-static void ibm44x_restart(char *cmd)
-{
-	local_irq_disable();
-	abort();
-}
-
-static void ibm44x_power_off(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-static void ibm44x_halt(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-/*
- * Read the 44x memory controller to get size of system memory.
- */
-static unsigned long __init ibm44x_find_end_of_memory(void)
-{
-	u32 i, bank_config;
-	u32 mem_size = 0;
-
-	for (i=0; i<4; i++)
-	{
-		switch (i)
-		{
-			case 0:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B0CR);
-				break;
-			case 1:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B1CR);
-				break;
-			case 2:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B2CR);
-				break;
-			case 3:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B3CR);
-				break;
-		}
-
-		bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
-
-		if (!(bank_config & SDRAM_CONFIG_BANK_ENABLE))
-			continue;
-		switch (SDRAM_CONFIG_BANK_SIZE(bank_config))
-		{
-			case SDRAM_CONFIG_SIZE_8M:
-				mem_size += PPC44x_MEM_SIZE_8M;
-				break;
-			case SDRAM_CONFIG_SIZE_16M:
-				mem_size += PPC44x_MEM_SIZE_16M;
-				break;
-			case SDRAM_CONFIG_SIZE_32M:
-				mem_size += PPC44x_MEM_SIZE_32M;
-				break;
-			case SDRAM_CONFIG_SIZE_64M:
-				mem_size += PPC44x_MEM_SIZE_64M;
-				break;
-			case SDRAM_CONFIG_SIZE_128M:
-				mem_size += PPC44x_MEM_SIZE_128M;
-				break;
-			case SDRAM_CONFIG_SIZE_256M:
-				mem_size += PPC44x_MEM_SIZE_256M;
-				break;
-			case SDRAM_CONFIG_SIZE_512M:
-				mem_size += PPC44x_MEM_SIZE_512M;
-				break;
-		}
-	}
-	return mem_size;
-}
-
-void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-				 unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif  /* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	ppc_md.init_IRQ = ppc4xx_pic_init;
-	ppc_md.find_end_of_memory = ibm44x_find_end_of_memory;
-	ppc_md.restart = ibm44x_restart;
-	ppc_md.power_off = ibm44x_power_off;
-	ppc_md.halt = ibm44x_halt;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-#if !defined(CONFIG_BDI_SWITCH)
-	/* Enable internal debug mode */
-        mtspr(SPRN_DBCR0, (DBCR0_IDM));
-
-	/* Clear any residual debug events */
-	mtspr(SPRN_DBSR, 0xffffffff);
-#endif
-}
-
-/* Called from machine_check_exception */
-void platform_machine_check(struct pt_regs *regs)
-{
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
-	       mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
-	       mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
-	       mfdcr(DCRN_PLB0_BESRL));
-	printk("PLB1: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
-	       mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL),
-	       mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH),
-	       mfdcr(DCRN_PLB1_BESRL));
-#else
-    	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x\n",
-		mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
-		mfdcr(DCRN_PLB0_ACR),  mfdcr(DCRN_PLB0_BESR));
-#endif
-	printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n",
-		mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL),
-		mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1));
-	printk("OPB0: BEAR=0x%08x%08x BSTAT=0x%08x\n",
-		mfdcr(DCRN_OPB0_BEARH), mfdcr(DCRN_OPB0_BEARL),
-		mfdcr(DCRN_OPB0_BSTAT));
-}
diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h
deleted file mode 100644
index f179db8634e0..000000000000
--- a/arch/ppc/syslib/ibm44x_common.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * PPC44x system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM44x_COMMON_H
-#define __PPC_SYSLIB_IBM44x_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * All clocks are in Hz
- */
-struct ibm44x_clocks {
-	unsigned int vco;	/* VCO, 0 if system PLL is bypassed */
-	unsigned int cpu;	/* CPUCoreClk */
-	unsigned int plb;	/* PLBClk */
-	unsigned int opb;	/* OPBClk */
-	unsigned int ebc;	/* PerClk */
-	unsigned int uart0;
-	unsigned int uart1;
-#ifdef CONFIG_440EP
-	unsigned int uart2;
-	unsigned int uart3;
-#endif
-};
-
-/* common 44x platform init */
-void ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			  unsigned long r6, unsigned long r7) __init;
-
-/* initialize decrementer and tick-related variables */
-void ibm44x_calibrate_decr(unsigned int freq) __init;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM44x_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm_ocp.c b/arch/ppc/syslib/ibm_ocp.c
deleted file mode 100644
index 2ee176610e7c..000000000000
--- a/arch/ppc/syslib/ibm_ocp.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <linux/module.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-
-struct ocp_sys_info_data ocp_sys_info = {
-	.opb_bus_freq	=	50000000,	/* OPB Bus Frequency (Hz) */
-	.ebc_bus_freq	=	33333333,	/* EBC Bus Frequency (Hz) */
-};
-
-EXPORT_SYMBOL(ocp_sys_info);
diff --git a/arch/ppc/syslib/indirect_pci.c b/arch/ppc/syslib/indirect_pci.c
deleted file mode 100644
index 83b323a7d029..000000000000
--- a/arch/ppc/syslib/indirect_pci.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-
-#ifdef CONFIG_PPC_INDIRECT_PCI_BE
-#define PCI_CFG_OUT out_be32
-#else
-#define PCI_CFG_OUT out_le32
-#endif
-
-static int
-indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops =
-{
-	indirect_read_config,
-	indirect_write_config
-};
-
-void __init
-setup_indirect_pci_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
-	void __iomem * cfg_data)
-{
-	hose->cfg_addr = cfg_addr;
-	hose->cfg_data = cfg_data;
-	hose->ops = &indirect_pci_ops;
-}
-
-void __init
-setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	unsigned long base = cfg_addr & PAGE_MASK;
-	void __iomem *mbase, *addr, *data;
-
-	mbase = ioremap(base, PAGE_SIZE);
-	addr = mbase + (cfg_addr & ~PAGE_MASK);
-	if ((cfg_data & PAGE_MASK) != base)
-		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
-	data = mbase + (cfg_data & ~PAGE_MASK);
-	setup_indirect_pci_nomap(hose, addr, data);
-}
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
deleted file mode 100644
index ebb8c8f8f30c..000000000000
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Workaround for device erratum PCI 9.
- * See Motorola's "XPC826xA Family Device Errata Reference."
- * The erratum applies to all 8260 family Hip4 processors.  It is scheduled 
- * to be fixed in HiP4 Rev C.  Erratum PCI 9 states that a simultaneous PCI 
- * inbound write transaction and PCI outbound read transaction can result in a 
- * bus deadlock.  The suggested workaround is to use the IDMA controller to 
- * perform all reads from PCI configuration, memory, and I/O space.
- *
- * Author:  andy_lowe@mvista.com
- *
- * 2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/byteorder.h>
-#include <asm/mpc8260.h>
-#include <asm/immap_cpm2.h>
-#include <asm/cpm2.h>
-
-#include "m82xx_pci.h"
-
-#ifdef CONFIG_8260_PCI9
-/*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
-
-#define IDMA_XFER_BUF_SIZE 64	/* size of the IDMA transfer buffer */
-
-/* define a structure for the IDMA dpram usage */
-typedef struct idma_dpram_s {
-	idma_t pram;				/* IDMA parameter RAM */
-	u_char xfer_buf[IDMA_XFER_BUF_SIZE];	/* IDMA transfer buffer */
-	idma_bd_t bd;				/* buffer descriptor */
-} idma_dpram_t;
-
-/* define offsets relative to start of IDMA dpram */
-#define IDMA_XFER_BUF_OFFSET (sizeof(idma_t))
-#define IDMA_BD_OFFSET (sizeof(idma_t) + IDMA_XFER_BUF_SIZE)
-
-/* define globals */
-static volatile idma_dpram_t *idma_dpram;
-
-/* Exactly one of CONFIG_8260_PCI9_IDMAn must be defined, 
- * where n is 1, 2, 3, or 4.  This selects the IDMA channel used for 
- * the PCI9 workaround.
- */
-#ifdef CONFIG_8260_PCI9_IDMA1
-#define IDMA_CHAN 0
-#define PROFF_IDMA PROFF_IDMA1_BASE
-#define IDMA_PAGE CPM_CR_IDMA1_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA1_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA2
-#define IDMA_CHAN 1
-#define PROFF_IDMA PROFF_IDMA2_BASE
-#define IDMA_PAGE CPM_CR_IDMA2_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA2_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA3
-#define IDMA_CHAN 2
-#define PROFF_IDMA PROFF_IDMA3_BASE
-#define IDMA_PAGE CPM_CR_IDMA3_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA3_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA4
-#define IDMA_CHAN 3
-#define PROFF_IDMA PROFF_IDMA4_BASE
-#define IDMA_PAGE CPM_CR_IDMA4_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA4_SBLOCK
-#endif
-
-void idma_pci9_init(void)
-{
-	uint dpram_offset;
-	volatile idma_t *pram;
-	volatile im_idma_t *idma_reg;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	/* allocate IDMA dpram */
-	dpram_offset = cpm_dpalloc(sizeof(idma_dpram_t), 64);
-	idma_dpram = cpm_dpram_addr(dpram_offset); 
-
-	/* initialize the IDMA parameter RAM */
-	memset((void *)idma_dpram, 0, sizeof(idma_dpram_t));
-	pram = &idma_dpram->pram;
-	pram->ibase = dpram_offset + IDMA_BD_OFFSET;
-	pram->dpr_buf = dpram_offset + IDMA_XFER_BUF_OFFSET;
-	pram->ss_max = 32;
-	pram->dts = 32;
-
-	/* initialize the IDMA_BASE pointer to the IDMA parameter RAM */
-	*((ushort *) &immap->im_dprambase[PROFF_IDMA]) = dpram_offset;
-
-	/* initialize the IDMA registers */
-	idma_reg = (volatile im_idma_t *) &immap->im_sdma.sdma_idsr1;
-	idma_reg[IDMA_CHAN].idmr = 0;		/* mask all IDMA interrupts */
-	idma_reg[IDMA_CHAN].idsr = 0xff;	/* clear all event flags */
-
-	printk(KERN_WARNING
-		"Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
-		IDMA_CHAN + 1);
-
-	return;
-}
-
-/* Use the IDMA controller to transfer data from I/O memory to local RAM.
- * The src address must be a physical address suitable for use by the DMA 
- * controller with no translation.  The dst address must be a kernel virtual 
- * address.  The dst address is translated to a physical address via 
- * virt_to_phys().
- * The sinc argument specifies whether or not the source address is incremented
- * by the DMA controller.  The source address is incremented if and only if sinc
- * is non-zero.  The destination address is always incremented since the 
- * destination is always host RAM.
- */
-static void 
-idma_pci9_read(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
-{
-	unsigned long flags;
-	volatile idma_t *pram = &idma_dpram->pram;
-	volatile idma_bd_t *bd = &idma_dpram->bd;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	local_irq_save(flags);
-
-	/* initialize IDMA parameter RAM for this transfer */
-	if (sinc)
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
-			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
-	else
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_DINC 
-			  | IDMA_DCM_SD_MEM2MEM;
-	pram->ibdptr = pram->ibase;
-	pram->sts = unit_size;
-	pram->istate = 0;
-
-	/* initialize the buffer descriptor */
-	bd->dst = virt_to_phys(dst);
-	bd->src = (uint) src;
-	bd->len = bytes;
-	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
-		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
-
-	/* issue the START_IDMA command to the CP */
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
-					 CPM_CR_START_IDMA) | CPM_CR_FLG;
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/* wait for transfer to complete */
-	while(bd->flags & IDMA_BD_V);
-
-	local_irq_restore(flags);
-
-	return;
-}
-
-/* Use the IDMA controller to transfer data from I/O memory to local RAM.
- * The dst address must be a physical address suitable for use by the DMA 
- * controller with no translation.  The src address must be a kernel virtual 
- * address.  The src address is translated to a physical address via 
- * virt_to_phys().
- * The dinc argument specifies whether or not the dest address is incremented
- * by the DMA controller.  The source address is incremented if and only if sinc
- * is non-zero.  The source address is always incremented since the 
- * source is always host RAM.
- */
-static void 
-idma_pci9_write(u8 *dst, u8 *src, int bytes, int unit_size, int dinc)
-{
-	unsigned long flags;
-	volatile idma_t *pram = &idma_dpram->pram;
-	volatile idma_bd_t *bd = &idma_dpram->bd;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	local_irq_save(flags);
-
-	/* initialize IDMA parameter RAM for this transfer */
-	if (dinc)
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
-			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
-	else
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC 
-			  | IDMA_DCM_SD_MEM2MEM;
-	pram->ibdptr = pram->ibase;
-	pram->sts = unit_size;
-	pram->istate = 0;
-
-	/* initialize the buffer descriptor */
-	bd->dst = (uint) dst;
-	bd->src = virt_to_phys(src);
-	bd->len = bytes;
-	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
-		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
-
-	/* issue the START_IDMA command to the CP */
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
-					 CPM_CR_START_IDMA) | CPM_CR_FLG;
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/* wait for transfer to complete */
-	while(bd->flags & IDMA_BD_V);
-
-	local_irq_restore(flags);
-
-	return;
-}
-
-/* Same as idma_pci9_read, but 16-bit little-endian byte swapping is performed
- * if the unit_size is 2, and 32-bit little-endian byte swapping is performed if
- * the unit_size is 4.
- */
-static void 
-idma_pci9_read_le(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
-{
-	int i;
-	u8 *p;
-
-	idma_pci9_read(dst, src, bytes, unit_size, sinc);
-	switch(unit_size) {
-		case 2:
-			for (i = 0, p = dst; i < bytes; i += 2, p += 2)
-				swab16s((u16 *) p);
-			break;
-		case 4:
-			for (i = 0, p = dst; i < bytes; i += 4, p += 4)
-				swab32s((u32 *) p);
-			break;
-		default:
-			break;
-	}
-}
-EXPORT_SYMBOL(idma_pci9_init);
-EXPORT_SYMBOL(idma_pci9_read);
-EXPORT_SYMBOL(idma_pci9_read_le);
-
-static inline int is_pci_mem(unsigned long addr)
-{
-	if (addr >= M82xx_PCI_LOWER_MMIO &&
-		addr <= M82xx_PCI_UPPER_MMIO)
-		return 1;
-	if (addr >= M82xx_PCI_LOWER_MEM &&
-		addr <= M82xx_PCI_UPPER_MEM)
-		return 1;
-	return 0;
-}
-
-#define is_pci_mem(pa) ( (pa > 0x80000000) && (pa < 0xc0000000))
-int readb(volatile unsigned char *addr)
-{
-	u8 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_8(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return val;
-}
-
-int readw(volatile unsigned short *addr)
-{
-	u16 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_le16(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return swab16(val);
-}
-
-unsigned readl(volatile unsigned *addr)
-{
-	u32 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_le32(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return swab32(val);
-}
-
-int inb(unsigned port)
-{
-	u8 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return val;
-}
-
-int inw(unsigned port)
-{
-	u16 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return swab16(val);
-}
-
-unsigned inl(unsigned port)
-{
-	u32 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return swab32(val);
-}
-
-void insb(unsigned port, void *buf, int ns)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u8), sizeof(u8), 0);
-}
-
-void insw(unsigned port, void *buf, int ns)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u16), sizeof(u16), 0);
-}
-
-void insl(unsigned port, void *buf, int nl)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, nl*sizeof(u32), sizeof(u32), 0);
-}
-
-void *memcpy_fromio(void *dest, unsigned long src, size_t count)
-{
-	unsigned long pa = iopa((unsigned long) src);
-
-	if (is_pci_mem(pa))
-		idma_pci9_read((u8 *)dest, (u8 *)pa, count, 32, 1);
-	else
-		memcpy(dest, (void *)src, count);
-	return dest;
-}
-
-EXPORT_SYMBOL(readb);
-EXPORT_SYMBOL(readw);
-EXPORT_SYMBOL(readl);
-EXPORT_SYMBOL(inb);
-EXPORT_SYMBOL(inw);
-EXPORT_SYMBOL(inl);
-EXPORT_SYMBOL(insb);
-EXPORT_SYMBOL(insw);
-EXPORT_SYMBOL(insl);
-EXPORT_SYMBOL(memcpy_fromio);
-
-#endif	/* ifdef CONFIG_8260_PCI9 */
-
-/* Indirect PCI routines adapted from arch/ppc/kernel/indirect_pci.c.
- * Copyright (C) 1998 Gabriel Paubert.
- */
-#ifndef CONFIG_8260_PCI9
-#define cfg_read(val, addr, type, op)	*val = op((type)(addr))
-#else
-#define cfg_read(val, addr, type, op) \
-	idma_pci9_read_le((u8*)(val),(u8*)(addr),sizeof(*(val)),sizeof(*(val)),0)
-#endif
-
-#define cfg_write(val, addr, type, op)	op((type *)(addr), (val))
-
-static int indirect_write_config(struct pci_bus *pbus, unsigned int devfn, int where,
-			 int size, u32 value)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	u8 cfg_type = 0;
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(pbus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (pbus->number != hose->first_busno)
-			cfg_type = 1;
-
-	out_be32(hose->cfg_addr,
-		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
-		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
-
-	switch (size)
-	{
-		case 1:
-			cfg_write(value, hose->cfg_data + (where & 3), u8, out_8);
-			break;
-		case 2:
-			cfg_write(value, hose->cfg_data + (where & 2), u16, out_le16);
-			break;
-		case 4:
-			cfg_write(value, hose->cfg_data + (where & 0), u32, out_le32);
-			break;
-	}		
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int indirect_read_config(struct pci_bus *pbus, unsigned int devfn, int where,
-			 int size, u32 *value)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	u8 cfg_type = 0;
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(pbus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (pbus->number != hose->first_busno)
-			cfg_type = 1;
-
-	out_be32(hose->cfg_addr,
-		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
-		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
-
-	switch (size)
-	{
-		case 1:
-			cfg_read(value, hose->cfg_data + (where & 3), u8 *, in_8);
-			break;
-		case 2:
-			cfg_read(value, hose->cfg_data + (where & 2), u16 *, in_le16);
-			break;
-		case 4:
-			cfg_read(value, hose->cfg_data + (where & 0), u32 *, in_le32);
-			break;
-	}		
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops =
-{
-	.read = indirect_read_config,
-	.write = indirect_write_config,
-};
-
-void
-setup_m8260_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	hose->ops = &indirect_pci_ops;
-	hose->cfg_addr = (unsigned int *) ioremap(cfg_addr, 4);
-	hose->cfg_data = (unsigned char *) ioremap(cfg_data, 4);
-}
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
deleted file mode 100644
index b40583724de3..000000000000
--- a/arch/ppc/syslib/m8260_setup.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
- *  Further modified for generic 8xx and 8260 by Dan.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/seq_file.h>
-#include <linux/irq.h>
-
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/machdep.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/ppc_sys.h>
-
-#include "cpm2_pic.h"
-
-unsigned char __res[sizeof(bd_t)];
-
-extern void pq2_find_bridges(void);
-extern void pq2pci_init_irq(void);
-extern void idma_pci9_init(void);
-
-/* Place-holder for board-specific init */
-void __attribute__ ((weak)) __init
-m82xx_board_setup(void)
-{
-}
-
-static void __init
-m8260_setup_arch(void)
-{
-	/* Print out Vendor and Machine info. */
-	printk(KERN_INFO "%s %s port\n", CPUINFO_VENDOR, CPUINFO_MACHINE);
-
-	/* Reset the Communication Processor Module. */
-	cpm2_reset();
-#ifdef CONFIG_8260_PCI9
-	/* Initialise IDMA for PCI erratum workaround */
-	idma_pci9_init();
-#endif
-#ifdef CONFIG_PCI_8260
-	pq2_find_bridges();
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-#endif
-
-	identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME,
-			in_be32((void *)CPM_MAP_ADDR + CPM_IMMR_OFFSET));
-
-	m82xx_board_setup();
-}
-
-/* The decrementer counts at the system (internal) clock frequency
- * divided by four.
- */
-static void __init
-m8260_calibrate_decr(void)
-{
-	bd_t *binfo = (bd_t *)__res;
-	int freq, divisor;
-
-	freq = binfo->bi_busfreq;
-        divisor = 4;
-        tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-}
-
-/* The 8260 has an internal 1-second timer update register that
- * we should use for this purpose.
- */
-static uint rtc_time;
-
-static int
-m8260_set_rtc_time(unsigned long time)
-{
-	rtc_time = time;
-
-	return(0);
-}
-
-static unsigned long
-m8260_get_rtc_time(void)
-{
-	/* Get time from the RTC.
-	*/
-	return((unsigned long)rtc_time);
-}
-
-#ifndef BOOTROM_RESTART_ADDR
-#warning "Using default BOOTROM_RESTART_ADDR!"
-#define BOOTROM_RESTART_ADDR	0xff000104
-#endif
-
-static void
-m8260_restart(char *cmd)
-{
-	extern void m8260_gorom(bd_t *bi, uint addr);
-	uint	startaddr;
-
-	/* Most boot roms have a warmstart as the second instruction
-	 * of the reset vector.  If that doesn't work for you, change this
-	 * or the reboot program to send a proper address.
-	 */
-	startaddr = BOOTROM_RESTART_ADDR;
-	if (cmd != NULL) {
-		if (!strncmp(cmd, "startaddr=", 10))
-			startaddr = simple_strtoul(&cmd[10], NULL, 0);
-	}
-
-	m8260_gorom((void*)__pa(__res), startaddr);
-}
-
-static void
-m8260_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-m8260_power_off(void)
-{
-	m8260_halt();
-}
-
-static int
-m8260_show_cpuinfo(struct seq_file *m)
-{
-	bd_t *bp = (bd_t *)__res;
-
-	seq_printf(m, "vendor\t\t: %s\n"
-		   "machine\t\t: %s\n"
-		   "\n"
-		   "mem size\t\t: 0x%08lx\n"
-		   "console baud\t\t: %ld\n"
-		   "\n"
-		   "core clock\t: %lu MHz\n"
-		   "CPM  clock\t: %lu MHz\n"
-		   "bus  clock\t: %lu MHz\n",
-		   CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize,
-		   bp->bi_baudrate, bp->bi_intfreq / 1000000,
-		   bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000);
-	return 0;
-}
-
-/* Initialize the internal interrupt controller.  The number of
- * interrupts supported can vary with the processor type, and the
- * 8260 family can have up to 64.
- * External interrupts can be either edge or level triggered, and
- * need to be initialized by the appropriate driver.
- */
-static void __init
-m8260_init_IRQ(void)
-{
-	cpm2_init_IRQ();
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	cpm2_immr->im_intctl.ic_siprr = 0x05309770;
-}
-
-/*
- * Same hack as 8xx
- */
-static unsigned long __init
-m8260_find_end_of_memory(void)
-{
-	bd_t *binfo = (bd_t *)__res;
-
-	return binfo->bi_memsize;
-}
-
-/* Map the IMMR, plus anything else we can cover
- * in that upper space according to the memory controller
- * chip select mapping.  Grab another bunch of space
- * below that for stuff we can't cover in the upper.
- */
-static void __init
-m8260_map_io(void)
-{
-	uint addr;
-
-	/* Map IMMR region to a 256MB BAT */
-	addr = (cpm2_immr != NULL) ? (uint)cpm2_immr : CPM_MAP_ADDR;
-	io_block_mapping(addr, addr, 0x10000000, _PAGE_IO);
-
-	/* Map I/O region to a 256MB BAT */
-	io_block_mapping(IO_VIRT_ADDR, IO_PHYS_ADDR, 0x10000000, _PAGE_IO);
-}
-
-/* Place-holder for board-specific ppc_md hooking */
-void __attribute__ ((weak)) __init
-m82xx_board_init(void)
-{
-}
-
-/* Inputs:
- *   r3 - Optional pointer to a board information structure.
- *   r4 - Optional pointer to the physical starting address of the init RAM
- *        disk.
- *   r5 - Optional pointer to the physical ending address of the init RAM
- *        disk.
- *   r6 - Optional pointer to the physical starting address of any kernel
- *        command-line parameters.
- *   r7 - Optional pointer to the physical ending address of any kernel
- *        command-line parameters.
- */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	if ( r3 )
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if ( r4 ) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-	/* take care of cmd line */
-	if ( r6 ) {
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-	ppc_md.setup_arch		= m8260_setup_arch;
-	ppc_md.show_cpuinfo		= m8260_show_cpuinfo;
-	ppc_md.init_IRQ			= m8260_init_IRQ;
-	ppc_md.get_irq			= cpm2_get_irq;
-
-	ppc_md.restart			= m8260_restart;
-	ppc_md.power_off		= m8260_power_off;
-	ppc_md.halt			= m8260_halt;
-
-	ppc_md.set_rtc_time		= m8260_set_rtc_time;
-	ppc_md.get_rtc_time		= m8260_get_rtc_time;
-	ppc_md.calibrate_decr		= m8260_calibrate_decr;
-
-	ppc_md.find_end_of_memory	= m8260_find_end_of_memory;
-	ppc_md.setup_io_mappings	= m8260_map_io;
-
-	/* Call back for board-specific settings and overrides. */
-	m82xx_board_init();
-}
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
deleted file mode 100644
index 657a1c25a2ab..000000000000
--- a/arch/ppc/syslib/m82xx_pci.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- *
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004 Red Hat, Inc.
- *
- * 2005 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-
-#include "m82xx_pci.h"
-
-/*
- * Interrupt routing
- */
-
-static inline int
-pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	  A      B      C      D
-	 */
-	{
-		{ PIRQA, PIRQB, PIRQC, PIRQD },	/* IDSEL 22 - PCI slot 0 */
-		{ PIRQD, PIRQA, PIRQB, PIRQC },	/* IDSEL 23 - PCI slot 1 */
-		{ PIRQC, PIRQD, PIRQA, PIRQB },	/* IDSEL 24 - PCI slot 2 */
-	};
-
-	const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void
-pq2pci_mask_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_unmask_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_mask_and_ack(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_end_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-	return;
-}
-
-struct hw_interrupt_type pq2pci_ic = {
-	"PQ2 PCI",
-	NULL,
-	NULL,
-	pq2pci_unmask_irq,
-	pq2pci_mask_irq,
-	pq2pci_mask_and_ack,
-	pq2pci_end_irq,
-	0
-};
-
-static irqreturn_t
-pq2pci_irq_demux(int irq, void *dev_id)
-{
-	unsigned long stat, mask, pend;
-	int bit;
-
-	for(;;) {
-		stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
-		mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
-		pend = stat & ~mask & 0xf0000000;
-		if (!pend)
-			break;
-		for (bit = 0; pend != 0; ++bit, pend <<= 1) {
-			if (pend & 0x80000000)
-				__do_IRQ(NR_CPM_INTS + bit);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pq2pci_irqaction = {
-	.handler = pq2pci_irq_demux,
-	.flags 	 = IRQF_DISABLED,
-	.mask	 = CPU_MASK_NONE,
-	.name	 = "PQ2 PCI cascade",
-};
-
-
-void
-pq2pci_init_irq(void)
-{
-	int irq;
-	volatile cpm2_map_t *immap = cpm2_immr;
-	for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
-		irq_desc[irq].chip = &pq2pci_ic;
-
-	/* make PCI IRQ level sensitive */
-	immap->im_intctl.ic_siexr &=
-		~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
-
-	/* mask all PCI interrupts */
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
-
-	/* install the demultiplexer for the PCI cascade interrupt */
-	setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
-	return;
-}
-
-static int
-pq2pci_exclude_device(u_char bus, u_char devfn)
-{
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/* PCI bus configuration registers.
- */
-static void
-pq2ads_setup_pci(struct pci_controller *hose)
-{
-	__u32 val;
-	volatile cpm2_map_t *immap = cpm2_immr;
-	bd_t* binfo = (bd_t*) __res;
-	u32 sccr = immap->im_clkrst.car_sccr;
-	uint pci_div,freq,time;
-		/* PCI int lowest prio */
-	/* Each 4 bits is a device bus request	and the MS 4bits
-	 is highest priority */
-	/* Bus                4bit value
-	   ---                ----------
-	   CPM high      	0b0000
-	   CPM middle           0b0001
-	   CPM low       	0b0010
-	   PCI request          0b0011
-	   Reserved      	0b0100
-	   Reserved      	0b0101
-	   Internal Core     	0b0110
-	   External Master 1 	0b0111
-	   External Master 2 	0b1000
-	   External Master 3 	0b1001
-	   The rest are reserved
-	 */
-	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
-	/* park bus on core */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
-	/*
-	 * Set up master windows that allow the CPU to access PCI space. These
-	 * windows are set up using the two SIU PCIBR registers.
-	 */
-
-	immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
-	immap->im_memctl.memc_pcibr0  = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
-
-#ifdef M82xx_PCI_SEC_WND_SIZE
-	immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
-	immap->im_memctl.memc_pcibr1  = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
-#endif
-
-	/* Enable PCI  */
-	immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
-
-	pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
-			( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
-	freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
-	time = (int)66666666/freq;
-
-	/* due to PCI Local Bus spec, some devices needs to wait such a long
-	time after RST 	deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
-	printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
-	(time==1) ? "0.5 seconds":"1 second" );
-
-	{
-		int i;
-		for(i=0;i<(500*time);i++)
-			udelay(1000);
-	}
-
-	/* setup ATU registers */
-	immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
-				((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
-
-	/* Set-up non-prefetchable window */
-	immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
-
-	/* Set-up prefetchable window */
-	immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
-		(~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
-
- 	/* Inbound transactions from PCI memory space */
-	immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
-					((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
-	immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS  >> PITA_ADDR_SHIFT);
-	immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
-
-	/* park bus on PCI */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
-	/* Enable bus mastering and inbound memory transactions */
-	early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
-	val &= 0xffff0000;
-	val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
-	early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
-
-}
-
-void __init pq2_find_bridges(void)
-{
-	extern int pci_assign_all_buses;
-	struct pci_controller * hose;
-	int host_bridge;
-
-	pci_assign_all_buses = 1;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	ppc_md.pci_swizzle = common_swizzle;
-
-	hose->first_busno = 0;
-	hose->bus_offset = 0;
-	hose->last_busno = 0xff;
-
-	setup_m8260_indirect_pci(hose,
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
-
-	/* Make sure it is a supported bridge */
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				PCI_VENDOR_ID,
-				&host_bridge);
-	switch (host_bridge) {
-		case PCI_DEVICE_ID_MPC8265:
-			break;
-		case PCI_DEVICE_ID_MPC8272:
-			break;
-		default:
-			printk("Attempting to use unrecognized host bridge ID"
-				" 0x%08x.\n", host_bridge);
-			break;
-	}
-
-	pq2ads_setup_pci(hose);
-
-	hose->io_space.start =	M82xx_PCI_LOWER_IO;
-	hose->io_space.end = M82xx_PCI_UPPER_IO;
-	hose->mem_space.start = M82xx_PCI_LOWER_MEM;
-	hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
-	hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
-
-	isa_io_base =
-	(unsigned long) ioremap(M82xx_PCI_IO_BASE,
-					M82xx_PCI_IO_SIZE);
-	hose->io_base_virt = (void *) isa_io_base;
-
-	/* setup resources */
-	pci_init_resource(&hose->mem_resources[0],
-			M82xx_PCI_LOWER_MEM,
-			M82xx_PCI_UPPER_MEM,
-			IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
-
-	pci_init_resource(&hose->mem_resources[1],
-			M82xx_PCI_LOWER_MMIO,
-			M82xx_PCI_UPPER_MMIO,
-			IORESOURCE_MEM, "PCI memory");
-
-	pci_init_resource(&hose->io_resource,
-			M82xx_PCI_LOWER_IO,
-			M82xx_PCI_UPPER_IO,
-			IORESOURCE_IO | 1, "PCI I/O");
-
-	ppc_md.pci_exclude_device = pq2pci_exclude_device;
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_map_irq = pq2pci_map_irq;
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pcibios_fixup_bus = NULL;
-
-}
diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h
deleted file mode 100644
index 924f73f8e595..000000000000
--- a/arch/ppc/syslib/m82xx_pci.h
+++ /dev/null
@@ -1,92 +0,0 @@
-
-#ifndef _PPC_KERNEL_M82XX_PCI_H
-#define _PPC_KERNEL_M82XX_PCI_H
-
-#include <asm/m8260_pci.h>
-/*
- *   Local->PCI map (from CPU)                             controlled by
- *   MPC826x master window
- *
- *   0xF6000000 - 0xF7FFFFFF    IO space
- *   0x80000000 - 0xBFFFFFFF    CPU2PCI memory space       PCIBR0
- *
- *   0x80000000 - 0x9FFFFFFF    PCI Mem with prefetch      (Outbound ATU #1)
- *   0xA0000000 - 0xBFFFFFFF    PCI Mem w/o  prefetch      (Outbound ATU #2)
- *   0xF6000000 - 0xF7FFFFFF    32-bit PCI IO              (Outbound ATU #3)
- *
- *   PCI->Local map (from PCI)
- *   MPC826x slave window                                  controlled by
- *
- *   0x00000000 - 0x07FFFFFF    MPC826x local memory       (Inbound ATU #1)
- */
-
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef M82xx_PCI_SLAVE_MEM_LOCAL
-#define M82xx_PCI_SLAVE_MEM_LOCAL	(((struct bd_info *)__res)->bi_memstart)
-#define M82xx_PCI_SLAVE_MEM_BUS		(((struct bd_info *)__res)->bi_memstart)
-#define M82xx_PCI_SLAVE_MEM_SIZE	(((struct bd_info *)__res)->bi_memsize)
-#endif
-
-/*
- * This is the window that allows the CPU to access PCI address space.
- * It will be setup with the SIU PCIBR0 register. All three PCI master
- * windows, which allow the CPU to access PCI prefetch, non prefetch,
- * and IO space (see below), must all fit within this window.
- */
-
-#ifndef M82xx_PCI_LOWER_MEM
-#define M82xx_PCI_LOWER_MEM		0x80000000
-#define M82xx_PCI_UPPER_MEM		0x9fffffff
-#define M82xx_PCI_MEM_OFFSET		0x00000000
-#define M82xx_PCI_MEM_SIZE		0x20000000
-#endif
-
-#ifndef M82xx_PCI_LOWER_MMIO
-#define M82xx_PCI_LOWER_MMIO		0xa0000000
-#define M82xx_PCI_UPPER_MMIO		0xafffffff
-#define M82xx_PCI_MMIO_OFFSET		0x00000000
-#define M82xx_PCI_MMIO_SIZE		0x20000000
-#endif
-
-#ifndef M82xx_PCI_LOWER_IO
-#define M82xx_PCI_LOWER_IO		0x00000000
-#define M82xx_PCI_UPPER_IO		0x01ffffff
-#define M82xx_PCI_IO_BASE		0xf6000000
-#define M82xx_PCI_IO_SIZE		0x02000000
-#endif
-
-#ifndef M82xx_PCI_PRIM_WND_SIZE
-#define M82xx_PCI_PRIM_WND_SIZE 	~(M82xx_PCI_IO_SIZE - 1U)
-#define M82xx_PCI_PRIM_WND_BASE		(M82xx_PCI_IO_BASE)
-#endif
-
-#ifndef M82xx_PCI_SEC_WND_SIZE
-#define M82xx_PCI_SEC_WND_SIZE 		~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U)
-#define M82xx_PCI_SEC_WND_BASE 		(M82xx_PCI_LOWER_MEM)
-#endif
-
-#ifndef POTA_ADDR_SHIFT
-#define POTA_ADDR_SHIFT		12
-#endif
-
-#ifndef PITA_ADDR_SHIFT
-#define PITA_ADDR_SHIFT		12
-#endif
-
-#ifndef _IO_BASE
-#define _IO_BASE isa_io_base
-#endif
-
-#ifdef CONFIG_8260_PCI9
-struct pci_controller;
-extern void setup_m8260_indirect_pci(struct pci_controller* hose,
-					u32 cfg_addr, u32 cfg_data);
-#else
-#define setup_m8260_indirect_pci setup_indirect_pci
-#endif
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
deleted file mode 100644
index 18da720fc1b0..000000000000
--- a/arch/ppc/syslib/m8xx_setup.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
- *  Further modified for generic 8xx by Dan.
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/ioport.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#endif
-
-#include <asm/mmu.h>
-#include <asm/reg.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/xmon.h>
-#include <asm/ppc_sys.h>
-
-#include "ppc8xx_pic.h"
-
-#ifdef CONFIG_MTD_PHYSMAP
-#define MPC8xxADS_BANK_WIDTH 4
-#endif
-
-#define MPC8xxADS_U_BOOT_SIZE          0x80000
-#define MPC8xxADS_FREE_AREA_OFFSET     MPC8xxADS_U_BOOT_SIZE
-
-#if defined(CONFIG_MTD_PARTITIONS)
- /*
-   NOTE: bank width and interleave relative to the installed flash
-   should have been chosen within MTD_CFI_GEOMETRY options.
- */
-static struct mtd_partition mpc8xxads_partitions[] = {
-	{
-		.name = "bootloader",
-		.size = MPC8xxADS_U_BOOT_SIZE,
-		.offset = 0,
-		.mask_flags   = MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name = "User FS",
-		.offset = MPC8xxADS_FREE_AREA_OFFSET
-	}
-};
-
-#define mpc8xxads_part_num ARRAY_SIZE(mpc8xxads_partitions)
-
-#endif
-
-static int m8xx_set_rtc_time(unsigned long time);
-static unsigned long m8xx_get_rtc_time(void);
-void m8xx_calibrate_decr(void);
-
-unsigned char __res[sizeof(bd_t)];
-
-extern unsigned long find_available_memory(void);
-extern void m8xx_cpm_reset(void);
-extern void m8xx_wdt_handler_install(bd_t *bp);
-extern void rpxfb_alloc_pages(void);
-extern void cpm_interrupt_init(void);
-
-void __attribute__ ((weak))
-board_init(void)
-{
-}
-
-void __init
-m8xx_setup_arch(void)
-{
-#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
-	bd_t *binfo = (bd_t *)__res;
-#endif
-
-	/* Reset the Communication Processor Module.
-	*/
-	m8xx_cpm_reset();
-
-#ifdef CONFIG_FB_RPX
-	rpxfb_alloc_pages();
-#endif
-
-#ifdef notdef
-	ROOT_DEV = Root_HDA1; /* hda1 */
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-#if 0
-	ROOT_DEV = Root_FD0; /* floppy */
-	rd_prompt = 1;
-	rd_doload = 1;
-	rd_image_start = 0;
-#endif
-#if 0	/* XXX this may need to be updated for the new bootmem stuff,
-	   or possibly just deleted (see set_phys_avail() in init.c).
-	   - paulus. */
-	/* initrd_start and size are setup by boot/head.S and kernel/head.S */
-	if ( initrd_start )
-	{
-		if (initrd_end > *memory_end_p)
-		{
-			printk("initrd extends beyond end of memory "
-			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-			       initrd_end,*memory_end_p);
-			initrd_start = 0;
-		}
-	}
-#endif
-#endif
-
-	board_init();
-}
-
-void
-abort(void)
-{
-#ifdef CONFIG_XMON
-	xmon(0);
-#endif
-	machine_restart(NULL);
-
-	/* not reached */
-	for (;;);
-}
-
-/* A place holder for time base interrupts, if they are ever enabled. */
-irqreturn_t timebase_interrupt(int irq, void * dev)
-{
-	printk ("timebase_interrupt()\n");
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction tbint_irqaction = {
-	.handler = timebase_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "tbint",
-};
-
-/* per-board overridable init_internal_rtc() function. */
-void __init __attribute__ ((weak))
-init_internal_rtc(void)
-{
-	/* Disable the RTC one second and alarm interrupts. */
-	clrbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
-
-	/* Enable the RTC */
-	setbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
-
-}
-
-/* The decrementer counts at the system (internal) clock frequency divided by
- * sixteen, or external oscillator divided by four.  We force the processor
- * to use system clock divided by sixteen.
- */
-void __init m8xx_calibrate_decr(void)
-{
-	bd_t	*binfo = (bd_t *)__res;
-	int freq, fp, divisor;
-
-	/* Unlock the SCCR. */
-	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, KAPWR_KEY);
-
-	/* Force all 8xx processors to use divide by 16 processor clock. */
-	setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr, 0x02000000);
-	/* Processor frequency is MHz.
-	 * The value 'fp' is the number of decrementer ticks per second.
-	 */
-	fp = binfo->bi_intfreq / 16;
-	freq = fp*60;	/* try to make freq/1e6 an integer */
-        divisor = 60;
-        printk("Decrementer Frequency = %d/%d\n", freq, divisor);
-        tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-
-	/* Perform some more timer/timebase initialization.  This used
-	 * to be done elsewhere, but other changes caused it to get
-	 * called more than once....that is a bad thing.
-	 *
-	 * First, unlock all of the registers we are going to modify.
-	 * To protect them from corruption during power down, registers
-	 * that are maintained by keep alive power are "locked".  To
-	 * modify these registers we have to write the key value to
-	 * the key location associated with the register.
-	 * Some boards power up with these unlocked, while others
-	 * are locked.  Writing anything (including the unlock code?)
-	 * to the unlocked registers will lock them again.  So, here
-	 * we guarantee the registers are locked, then we unlock them
-	 * for our use.
-	 */
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY);
-
-	init_internal_rtc();
-
-	/* Enabling the decrementer also enables the timebase interrupts
-	 * (or from the other point of view, to get decrementer interrupts
-	 * we have to enable the timebase).  The decrementer interrupt
-	 * is wired into the vector table, nothing to do here for that.
-	 */
-	out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_tbscr, (mk_int_int_mask(DEC_INTERRUPT) << 8) | (TBSCR_TBF | TBSCR_TBE));
-
-	if (setup_irq(DEC_INTERRUPT, &tbint_irqaction))
-		panic("Could not allocate timer IRQ!");
-
-#ifdef CONFIG_8xx_WDT
-	/* Install watchdog timer handler early because it might be
-	 * already enabled by the bootloader
-	 */
-	m8xx_wdt_handler_install(binfo);
-#endif
-}
-
-/* The RTC on the MPC8xx is an internal register.
- * We want to protect this during power down, so we need to unlock,
- * modify, and re-lock.
- */
-static int
-m8xx_set_rtc_time(unsigned long time)
-{
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc, time);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, ~KAPWR_KEY);
-	return(0);
-}
-
-static unsigned long
-m8xx_get_rtc_time(void)
-{
-	/* Get time from the RTC. */
-	return (unsigned long) in_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc);
-}
-
-static void
-m8xx_restart(char *cmd)
-{
-	__volatile__ unsigned char dummy;
-
-	local_irq_disable();
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, 0x00000080);
-	/* Clear the ME bit in MSR to cause checkstop on machine check
-	*/
-	mtmsr(mfmsr() & ~0x1000);
-
-	dummy = in_8(&((immap_t *)IMAP_ADDR)->im_clkrst.res[0]);
-	printk("Restart failed\n");
-	while(1);
-}
-
-static void
-m8xx_power_off(void)
-{
-   m8xx_restart(NULL);
-}
-
-static void
-m8xx_halt(void)
-{
-   m8xx_restart(NULL);
-}
-
-
-static int
-m8xx_show_percpuinfo(struct seq_file *m, int i)
-{
-	bd_t	*bp;
-
-	bp = (bd_t *)__res;
-
-	seq_printf(m, "clock\t\t: %uMHz\n"
-		   "bus clock\t: %uMHz\n",
-		   bp->bi_intfreq / 1000000,
-		   bp->bi_busfreq / 1000000);
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct irqaction mbx_i8259_irqaction = {
-	.handler = mbx_i8259_action,
-	.mask = CPU_MASK_NONE,
-	.name = "i8259 cascade",
-};
-#endif
-
-/* Initialize the internal interrupt controller.  The number of
- * interrupts supported can vary with the processor type, and the
- * 82xx family can have up to 64.
- * External interrupts can be either edge or level triggered, and
- * need to be initialized by the appropriate driver.
- */
-static void __init
-m8xx_init_IRQ(void)
-{
-	int i;
-
-	for (i = SIU_IRQ_OFFSET ; i < SIU_IRQ_OFFSET + NR_SIU_INTS ; i++)
-		irq_desc[i].chip = &ppc8xx_pic;
-
-	cpm_interrupt_init();
-
-#if defined(CONFIG_PCI)
-	for (i = I8259_IRQ_OFFSET ; i < I8259_IRQ_OFFSET + NR_8259_INTS ; i++)
-		irq_desc[i].chip = &i8259_pic;
-
-	i8259_pic_irq_offset = I8259_IRQ_OFFSET;
-	i8259_init(0);
-
-	/* The i8259 cascade interrupt must be level sensitive. */
-
-	clrbits32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, (0x80000000 >> ISA_BRIDGE_INT));
-	if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction))
-		enable_irq(ISA_BRIDGE_INT);
-#endif	/* CONFIG_PCI */
-}
-
-/* -------------------------------------------------------------------- */
-
-/*
- * This is a big hack right now, but it may turn into something real
- * someday.
- *
- * For the 8xx boards (at this time anyway), there is nothing to initialize
- * associated the PROM.  Rather than include all of the prom.c
- * functions in the image just to get prom_init, all we really need right
- * now is the initialization of the physical memory region.
- */
-static unsigned long __init
-m8xx_find_end_of_memory(void)
-{
-	bd_t	*binfo;
-	extern unsigned char __res[];
-
-	binfo = (bd_t *)__res;
-
-	return binfo->bi_memsize;
-}
-
-/*
- * Now map in some of the I/O space that is generically needed
- * or shared with multiple devices.
- * All of this fits into the same 4Mbyte region, so it only
- * requires one page table page.  (or at least it used to  -- paulus)
- */
-static void __init
-m8xx_map_io(void)
-{
-        io_block_mapping(IMAP_ADDR, IMAP_ADDR, IMAP_SIZE, _PAGE_IO);
-#ifdef CONFIG_MBX
-        io_block_mapping(NVRAM_ADDR, NVRAM_ADDR, NVRAM_SIZE, _PAGE_IO);
-        io_block_mapping(MBX_CSR_ADDR, MBX_CSR_ADDR, MBX_CSR_SIZE, _PAGE_IO);
-        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
-
-	/* Map some of the PCI/ISA I/O space to get the IDE interface.
-	*/
-        io_block_mapping(PCI_ISA_IO_ADDR, PCI_ISA_IO_ADDR, 0x4000, _PAGE_IO);
-        io_block_mapping(PCI_IDE_ADDR, PCI_IDE_ADDR, 0x4000, _PAGE_IO);
-#endif
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-	io_block_mapping(RPX_CSR_ADDR, RPX_CSR_ADDR, RPX_CSR_SIZE, _PAGE_IO);
-#if !defined(CONFIG_PCI)
-	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
-#endif
-#endif
-#if defined(CONFIG_RPXTOUCH) || defined(CONFIG_FB_RPX)
-	io_block_mapping(HIOX_CSR_ADDR, HIOX_CSR_ADDR, HIOX_CSR_SIZE, _PAGE_IO);
-#endif
-#ifdef CONFIG_FADS
-	io_block_mapping(BCSR_ADDR, BCSR_ADDR, BCSR_SIZE, _PAGE_IO);
-#endif
-#ifdef CONFIG_PCI
-        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
-#endif
-#if defined(CONFIG_NETTA)
-	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	if ( r3 )
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-
-#ifdef CONFIG_PCI
-	m8xx_setup_pci_ptrs();
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if ( r4 )
-	{
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-	/* take care of cmd line */
-	if ( r6 )
-	{
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-	identify_ppc_sys_by_name(BOARD_CHIP_NAME);
-
-	ppc_md.setup_arch		= m8xx_setup_arch;
-	ppc_md.show_percpuinfo		= m8xx_show_percpuinfo;
-	ppc_md.init_IRQ			= m8xx_init_IRQ;
-	ppc_md.get_irq			= m8xx_get_irq;
-	ppc_md.init			= NULL;
-
-	ppc_md.restart			= m8xx_restart;
-	ppc_md.power_off		= m8xx_power_off;
-	ppc_md.halt			= m8xx_halt;
-
-	ppc_md.time_init		= NULL;
-	ppc_md.set_rtc_time		= m8xx_set_rtc_time;
-	ppc_md.get_rtc_time		= m8xx_get_rtc_time;
-	ppc_md.calibrate_decr		= m8xx_calibrate_decr;
-
-	ppc_md.find_end_of_memory	= m8xx_find_end_of_memory;
-	ppc_md.setup_io_mappings	= m8xx_map_io;
-}
diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c
deleted file mode 100644
index fffac8cbeb51..000000000000
--- a/arch/ppc/syslib/m8xx_wdt.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * m8xx_wdt.c - MPC8xx watchdog driver
- *
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <asm/8xx_immap.h>
-#include <syslib/m8xx_wdt.h>
-
-static int wdt_timeout;
-int m8xx_has_internal_rtc = 0;
-
-static irqreturn_t m8xx_wdt_interrupt(int, void *);
-static struct irqaction m8xx_wdt_irqaction = {
-	.handler = m8xx_wdt_interrupt,
-	.name = "watchdog",
-};
-
-void m8xx_wdt_reset(void)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-
-	out_be16(&imap->im_siu_conf.sc_swsr, 0x556c);	/* write magic1 */
-	out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39);	/* write magic2 */
-}
-
-static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-
-	m8xx_wdt_reset();
-
-	setbits16(&imap->im_sit.sit_piscr, PISCR_PS);
-	return IRQ_HANDLED;
-}
-
-#define SYPCR_SWP 0x1
-#define SYPCR_SWE 0x4
-
-
-void __init m8xx_wdt_install_irq(volatile immap_t *imap, bd_t *binfo)
-{
-	u32 pitc;
-	u32 pitrtclk;
-
-	/*
-	 * Fire trigger if half of the wdt ticked down 
-	 */
-
-	if (imap->im_sit.sit_rtcsc & RTCSC_38K)
-		pitrtclk = 9600;
-	else
-		pitrtclk = 8192;
-
-	if ((wdt_timeout) > (UINT_MAX / pitrtclk))
-		pitc = wdt_timeout / binfo->bi_intfreq * pitrtclk / 2;
-	else
-		pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2;
-
-	out_be32(&imap->im_sit.sit_pitc, pitc << 16);
-
-	out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE);
-
-	if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction))
-		panic("m8xx_wdt: error setting up the watchdog irq!");
-
-	printk(KERN_NOTICE
-	       "m8xx_wdt: keep-alive trigger installed (PITC: 0x%04X)\n", pitc);
-
-}
-
-static void m8xx_wdt_timer_func(unsigned long data);
-
-static struct timer_list m8xx_wdt_timer =
-	TIMER_INITIALIZER(m8xx_wdt_timer_func, 0, 0);
-
-void m8xx_wdt_stop_timer(void)
-{
-	del_timer(&m8xx_wdt_timer);
-}
-
-void m8xx_wdt_install_timer(void)
-{
-	m8xx_wdt_timer.expires = jiffies + (HZ/2);
-	add_timer(&m8xx_wdt_timer);
-}
-
-static void m8xx_wdt_timer_func(unsigned long data)
-{
-	m8xx_wdt_reset();
-	m8xx_wdt_install_timer();
-}
-
-void __init m8xx_wdt_handler_install(bd_t * binfo)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-	u32 sypcr;
-
-	sypcr = in_be32(&imap->im_siu_conf.sc_sypcr);
-
-	if (!(sypcr & SYPCR_SWE)) {
-		printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
-		       sypcr);
-		return;
-	}
-
-	m8xx_wdt_reset();
-
-	printk(KERN_NOTICE
-	       "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n",
-	       (sypcr >> 16), sypcr & SYPCR_SWP);
-
-	wdt_timeout = (sypcr >> 16) & 0xFFFF;
-
-	if (!wdt_timeout)
-		wdt_timeout = 0xFFFF;
-
-	if (sypcr & SYPCR_SWP)
-		wdt_timeout *= 2048;
-
-	m8xx_has_internal_rtc = in_be16(&imap->im_sit.sit_rtcsc) & RTCSC_RTE;
-
-	/* if the internal RTC is off use a kernel timer */
-	if (!m8xx_has_internal_rtc) {
-		if (wdt_timeout < (binfo->bi_intfreq/HZ))
-			printk(KERN_ERR "m8xx_wdt: timeout too short for ktimer!\n");
-		m8xx_wdt_install_timer();
-	} else
-		m8xx_wdt_install_irq(imap, binfo);
-
-	wdt_timeout /= binfo->bi_intfreq;
-}
-
-int m8xx_wdt_get_timeout(void)
-{
-	return wdt_timeout;
-}
diff --git a/arch/ppc/syslib/m8xx_wdt.h b/arch/ppc/syslib/m8xx_wdt.h
deleted file mode 100644
index e75835f0012b..000000000000
--- a/arch/ppc/syslib/m8xx_wdt.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _PPC_SYSLIB_M8XX_WDT_H
-#define _PPC_SYSLIB_M8XX_WDT_H
-
-extern int m8xx_has_internal_rtc;
-
-extern void m8xx_wdt_handler_install(bd_t * binfo);
-extern int m8xx_wdt_get_timeout(void);
-extern void m8xx_wdt_reset(void);
-extern void m8xx_wdt_install_timer(void);
-extern void m8xx_wdt_stop_timer(void);
-
-#endif				/* _PPC_SYSLIB_M8XX_WDT_H */
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
deleted file mode 100644
index 437a294527a9..000000000000
--- a/arch/ppc/syslib/mpc10x_common.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
- * Mem ctlr, EPIC, etc.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/serial_8250.h>
-#include <linux/fsl_devices.h>
-#include <linux/device.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/mpc10x.h>
-#include <asm/ppc_sys.h>
-
-#ifdef CONFIG_MPC10X_OPENPIC
-#ifdef CONFIG_EPIC_SERIAL_MODE
-#define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5)
-#else
-#define EPIC_IRQ_BASE 5
-#endif
-#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART1_IRQ (EPIC_IRQ_BASE + 5 + NUM_8259_INTERRUPTS)
-#else
-#define MPC10X_I2C_IRQ -1
-#define MPC10X_DMA0_IRQ -1
-#define MPC10X_DMA1_IRQ -1
-#define MPC10X_UART0_IRQ -1
-#define MPC10X_UART1_IRQ -1
-#endif
-
-static struct fsl_i2c_platform_data mpc10x_i2c_pdata = {
-	.device_flags		= 0,
-};
-
-static struct plat_serial8250_port serial_plat_uart0[] = {
-	[0] = {
-		.mapbase	= 0x4500,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-static struct plat_serial8250_port serial_plat_uart1[] = {
-	[0] = {
-		.mapbase	= 0x4600,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC10X_IIC1] = {
-		.name 	= "fsl-i2c",
-		.id	= 1,
-		.dev.platform_data = &mpc10x_i2c_pdata,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start 	= MPC10X_EUMB_I2C_OFFSET,
-				.end	= MPC10X_EUMB_I2C_OFFSET +
-		                            MPC10X_EUMB_I2C_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags 	= IORESOURCE_IRQ
-			},
-		},
-	},
-	[MPC10X_DMA0] = {
-		.name	= "fsl-dma",
-		.id	= 0,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start 	= MPC10X_EUMB_DMA_OFFSET + 0x10,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_DMA1] = {
-		.name	= "fsl-dma",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC10X_EUMB_DMA_OFFSET + 0x20,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x2f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_DMA1] = {
-		.name	= "fsl-dma",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC10X_EUMB_DMA_OFFSET + 0x20,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x2f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_UART0] = {
-		.name = "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM,
-		.dev.platform_data = serial_plat_uart0,
-	},
-	[MPC10X_UART1] = {
-		.name = "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM1,
-		.dev.platform_data = serial_plat_uart1,
-	},
-
-};
-
-/* We use the PCI ID to match on */
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name 	= "8245",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_8245,
-		.num_devices	= 5,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_UART0, MPC10X_UART1,
-		},
-	},
-	{
-		.ppc_sys_name 	= "8240",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_8240,
-		.num_devices	= 3,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
-		},
-	},
-	{
-		.ppc_sys_name	= "107",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_107,
-		.num_devices	= 3,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
-		},
-	},
-	{       /* default match */
-		.ppc_sys_name   = "",
-		.mask           = 0x00000000,
-		.value          = 0x00000000,
-	},
-};
-
-/*
- * mach_mpc10x_fixup: This function enables DUART mode if it detects
- * if it detects two UARTS in the platform device entries.
- */
-static int __init mach_mpc10x_fixup(struct platform_device *pdev)
-{
-	if (strncmp (pdev->name, "serial8250", 10) == 0 && pdev->id == 1)
-		writeb(readb(serial_plat_uart1[0].membase + 0x11) | 0x1,
-				serial_plat_uart1[0].membase + 0x11);
-	return 0;
-}
-
-static int __init mach_mpc10x_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc10x_fixup;
-	return 0;
-}
-postcore_initcall(mach_mpc10x_init);
-
-/* Set resources to match bridge memory map */
-void __init
-mpc10x_bridge_set_resources(int map, struct pci_controller *hose)
-{
-
-	switch (map) {
-		case MPC10X_MEM_MAP_A:
-			pci_init_resource(&hose->io_resource,
-					0x00000000,
-					0x3f7fffff,
-					IORESOURCE_IO,
-					"PCI host bridge");
-
-			pci_init_resource (&hose->mem_resources[0],
-					0xc0000000,
-					0xfeffffff,
-					IORESOURCE_MEM,
-					"PCI host bridge");
-			break;
-		case MPC10X_MEM_MAP_B:
-			pci_init_resource(&hose->io_resource,
-					0x00000000,
-					0x00bfffff,
-					IORESOURCE_IO,
-					"PCI host bridge");
-
-			pci_init_resource (&hose->mem_resources[0],
-					0x80000000,
-					0xfcffffff,
-					IORESOURCE_MEM,
-					"PCI host bridge");
-			break;
-		default:
-			printk("mpc10x_bridge_set_resources: "
-					"Invalid map specified\n");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit1", 0x100);
-	}
-}
-
-/*
- * Do some initialization and put the EUMB registers at the specified address
- * (also map the EPIC registers into virtual space--OpenPIC_Addr will be set).
- *
- * The EPIC is not on the 106, only the 8240 and 107.
- */
-int __init
-mpc10x_bridge_init(struct pci_controller *hose,
-		   uint current_map,
-		   uint new_map,
-		   uint phys_eumb_base)
-{
-	int	host_bridge, picr1, picr1_bit, i;
-	ulong	pci_config_addr, pci_config_data;
-	u_char	pir, byte;
-
-	if (ppc_md.progress) ppc_md.progress("mpc10x:enter", 0x100);
-
-	/* Set up for current map so we can get at config regs */
-	switch (current_map) {
-		case MPC10X_MEM_MAP_A:
-			setup_indirect_pci(hose,
-					   MPC10X_MAPA_CNFG_ADDR,
-					   MPC10X_MAPA_CNFG_DATA);
-			break;
-		case MPC10X_MEM_MAP_B:
-			setup_indirect_pci(hose,
-					   MPC10X_MAPB_CNFG_ADDR,
-					   MPC10X_MAPB_CNFG_DATA);
-			break;
-		default:
-			printk("mpc10x_bridge_init: %s\n",
-				"Invalid current map specified");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit1", 0x100);
-			return -1;
-	}
-
-	/* Make sure it's a supported bridge */
-	early_read_config_dword(hose,
-			        0,
-			        PCI_DEVFN(0,0),
-			        PCI_VENDOR_ID,
-			        &host_bridge);
-
-	switch (host_bridge) {
-		case MPC10X_BRIDGE_106:
-		case MPC10X_BRIDGE_8240:
-		case MPC10X_BRIDGE_107:
-		case MPC10X_BRIDGE_8245:
-			break;
-		default:
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit2", 0x100);
-			return -1;
-	}
-
-	switch (new_map) {
-		case MPC10X_MEM_MAP_A:
-			MPC10X_SETUP_HOSE(hose, A);
-			pci_config_addr = MPC10X_MAPA_CNFG_ADDR;
-			pci_config_data = MPC10X_MAPA_CNFG_DATA;
-			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_A;
-			break;
-		case MPC10X_MEM_MAP_B:
-			MPC10X_SETUP_HOSE(hose, B);
-			pci_config_addr = MPC10X_MAPB_CNFG_ADDR;
-			pci_config_data = MPC10X_MAPB_CNFG_DATA;
-			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_B;
-			break;
-		default:
-			printk("mpc10x_bridge_init: %s\n",
-				"Invalid new map specified");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit3", 0x100);
-			return -1;
-	}
-
-	/* Make bridge use the 'new_map', if not already usng it */
-	if (current_map != new_map) {
-		early_read_config_dword(hose,
-					0,
-					PCI_DEVFN(0,0),
-					MPC10X_CFG_PICR1_REG,
-					&picr1);
-
-		picr1 = (picr1 & ~MPC10X_CFG_PICR1_ADDR_MAP_MASK) |
-			 picr1_bit;
-
-		early_write_config_dword(hose,
-					 0,
-					 PCI_DEVFN(0,0),
-					 MPC10X_CFG_PICR1_REG,
-					 picr1);
-
-		asm volatile("sync");
-
-		/* Undo old mappings & map in new cfg data/addr regs */
-		iounmap((void *)hose->cfg_addr);
-		iounmap((void *)hose->cfg_data);
-
-		setup_indirect_pci(hose,
-				   pci_config_addr,
-				   pci_config_data);
-	}
-
-	/* Setup resources to match map */
-	mpc10x_bridge_set_resources(new_map, hose);
-
-	/*
-	 * Want processor accesses of 0xFDxxxxxx to be mapped
-	 * to PCI memory space at 0x00000000.  Do not want
-	 * host bridge to respond to PCI memory accesses of
-	 * 0xFDxxxxxx.  Do not want host bridge to respond
-	 * to PCI memory addresses 0xFD000000-0xFDFFFFFF;
-	 * want processor accesses from 0x000A0000-0x000BFFFF
-	 * to be forwarded to system memory.
-	 *
-	 * Only valid if not in agent mode and using MAP B.
-	 */
-	if (new_map == MPC10X_MEM_MAP_B) {
-		early_read_config_byte(hose,
-				       0,
-				       PCI_DEVFN(0,0),
-				       MPC10X_CFG_MAPB_OPTIONS_REG,
-				       &byte);
-
-		byte &= ~(MPC10X_CFG_MAPB_OPTIONS_PFAE  |
-			  MPC10X_CFG_MAPB_OPTIONS_PCICH |
-			  MPC10X_CFG_MAPB_OPTIONS_PROCCH);
-
-		if (host_bridge != MPC10X_BRIDGE_106) {
-			byte |= MPC10X_CFG_MAPB_OPTIONS_CFAE;
-		}
-
-		early_write_config_byte(hose,
-					0,
-					PCI_DEVFN(0,0),
-					MPC10X_CFG_MAPB_OPTIONS_REG,
-					byte);
-	}
-
-	if (host_bridge != MPC10X_BRIDGE_106) {
-		early_read_config_byte(hose,
-				       0,
-				       PCI_DEVFN(0,0),
-				       MPC10X_CFG_PIR_REG,
-				       &pir);
-
-		if (pir != MPC10X_CFG_PIR_HOST_BRIDGE) {
-			printk("Host bridge in Agent mode\n");
-			/* Read or Set LMBAR & PCSRBAR? */
-		}
-
-		/* Set base addr of the 8240/107 EUMB.  */
-		early_write_config_dword(hose,
-					 0,
-					 PCI_DEVFN(0,0),
-					 MPC10X_CFG_EUMBBAR,
-					 phys_eumb_base);
-#ifdef CONFIG_MPC10X_OPENPIC
-		/* Map EPIC register part of EUMB into vitual memory  - PCORE
-		   uses an i8259 instead of EPIC. */
-		OpenPIC_Addr =
-			ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
-				MPC10X_EUMB_EPIC_SIZE);
-#endif
-	}
-
-#ifdef CONFIG_MPC10X_STORE_GATHERING
-	mpc10x_enable_store_gathering(hose);
-#else
-	mpc10x_disable_store_gathering(hose);
-#endif
-
-	/* setup platform devices for MPC10x bridges */
-	identify_ppc_sys_by_id (host_bridge);
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		unsigned int dev_id = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id],
-			phys_eumb_base);
-	}
-
-	/* IRQs are determined at runtime */
-	ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ;
-	ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ;
-
-	serial_plat_uart0[0].mapbase += phys_eumb_base;
-	serial_plat_uart0[0].irq = MPC10X_UART0_IRQ;
-	serial_plat_uart0[0].membase = ioremap(serial_plat_uart0[0].mapbase, 0x100);
-
-	serial_plat_uart1[0].mapbase += phys_eumb_base;
-	serial_plat_uart1[0].irq = MPC10X_UART1_IRQ;
-	serial_plat_uart1[0].membase = ioremap(serial_plat_uart1[0].mapbase, 0x100);
-
-	/*
-	 * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
-	 * PCI reads may return stale data so turn off.
-	 */
-	if ((host_bridge == MPC10X_BRIDGE_8240)
-		|| (host_bridge == MPC10X_BRIDGE_8245)
-		|| (host_bridge == MPC10X_BRIDGE_107)) {
-
-		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR1_REG, &picr1);
-
-		picr1 &= ~MPC10X_CFG_PICR1_SPEC_PCI_RD;
-
-		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR1_REG, picr1);
-	}
-
-	/*
-	 * 8241/8245 erratum 28: PCI reads from local memory may return
-	 * stale data.  Workaround by setting PICR2[0] to disable copyback
-	 * optimization.  Oddly, the latest available user manual for the
-	 * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
-	 */
-	if (host_bridge == MPC10X_BRIDGE_8245) {
-		u32	picr2;
-
-		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR2_REG, &picr2);
-
-		picr2 |= MPC10X_CFG_PICR2_COPYBACK_OPT;
-
-		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-			 MPC10X_CFG_PICR2_REG, picr2);
-	}
-
-	if (ppc_md.progress) ppc_md.progress("mpc10x:exit", 0x100);
-	return 0;
-}
-
-/*
- * Need to make our own PCI config space access macros because
- * mpc10x_get_mem_size() is called before the data structures are set up for
- * the 'early_xxx' and 'indirect_xxx' routines to work.
- * Assumes bus 0.
- */
-#define MPC10X_CFG_read(val, addr, type, op)	*val = op((type)(addr))
-#define MPC10X_CFG_write(val, addr, type, op)	op((type *)(addr), (val))
-
-#define MPC10X_PCI_OP(rw, size, type, op, mask)			 	\
-static void								\
-mpc10x_##rw##_config_##size(uint *cfg_addr, uint *cfg_data, int devfn, int offset, type val) \
-{									\
-	out_be32(cfg_addr, 						\
-		 ((offset & 0xfc) << 24) | (devfn << 16)		\
-		 | (0 << 8) | 0x80);					\
-	MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op);	\
-	return;    					 		\
-}
-
-MPC10X_PCI_OP(read,  byte,  u8 *, in_8, 3)
-MPC10X_PCI_OP(read,  dword, u32 *, in_le32, 0)
-#if 0	/* Not used */
-MPC10X_PCI_OP(write, byte,  u8, out_8, 3)
-MPC10X_PCI_OP(read,  word,  u16 *, in_le16, 2)
-MPC10X_PCI_OP(write, word,  u16, out_le16, 2)
-MPC10X_PCI_OP(write, dword, u32, out_le32, 0)
-#endif
-
-/*
- * Read the memory controller registers to determine the amount of memory in
- * the system.  This assumes that the firmware has correctly set up the memory
- * controller registers.
- */
-unsigned long __init
-mpc10x_get_mem_size(uint mem_map)
-{
-	uint			*config_addr, *config_data, val;
-	ulong			start, end, total, offset;
-	int			i;
-	u_char			bank_enables;
-
-	switch (mem_map) {
-		case MPC10X_MEM_MAP_A:
-			config_addr = (uint *)MPC10X_MAPA_CNFG_ADDR;
-			config_data = (uint *)MPC10X_MAPA_CNFG_DATA;
-			break;
-		case MPC10X_MEM_MAP_B:
-			config_addr = (uint *)MPC10X_MAPB_CNFG_ADDR;
-			config_data = (uint *)MPC10X_MAPB_CNFG_DATA;
-			break;
-		default:
-			return 0;
-	}
-
-	mpc10x_read_config_byte(config_addr,
-				config_data,
-				PCI_DEVFN(0,0),
-			        MPC10X_MCTLR_MEM_BANK_ENABLES,
-			        &bank_enables);
-
-	total = 0;
-
-	for (i=0; i<8; i++) {
-		if (bank_enables & (1 << i)) {
-			offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			start = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			start = (val << 28) | (start << 20);
-
-			offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			end = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			end = (val << 28) | (end << 20) | 0xfffff;
-
-			total += (end - start + 1);
-		}
-	}
-
-	return total;
-}
-
-int __init
-mpc10x_enable_store_gathering(struct pci_controller *hose)
-{
-	uint picr1;
-
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-			        MPC10X_CFG_PICR1_REG,
-			        &picr1);
-
-	picr1 |= MPC10X_CFG_PICR1_ST_GATH_EN;
-
-	early_write_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				MPC10X_CFG_PICR1_REG,
-				picr1);
-
-	return 0;
-}
-
-int __init
-mpc10x_disable_store_gathering(struct pci_controller *hose)
-{
-	uint picr1;
-
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-			        MPC10X_CFG_PICR1_REG,
-			        &picr1);
-
-	picr1 &= ~MPC10X_CFG_PICR1_ST_GATH_EN;
-
-	early_write_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				MPC10X_CFG_PICR1_REG,
-				picr1);
-
-	return 0;
-}
-
-#ifdef CONFIG_MPC10X_OPENPIC
-void __init mpc10x_set_openpic(void)
-{
-	/* Map external IRQs */
-	openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
-	/* Skip reserved space and map i2c and DMA Ch[01] */
-	openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
-	/* Skip reserved space and map Message Unit Interrupt (I2O) */
-	openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
-	/* Skip reserved space and map Serial Interrupts */
-	openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120);
-
-	openpic_init(NUM_8259_INTERRUPTS);
-}
-#endif
diff --git a/arch/ppc/syslib/mpc52xx_devices.c b/arch/ppc/syslib/mpc52xx_devices.c
deleted file mode 100644
index 7487539a4e92..000000000000
--- a/arch/ppc/syslib/mpc52xx_devices.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Freescale MPC52xx device descriptions
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/fsl_devices.h>
-#include <linux/resource.h>
-#include <linux/platform_device.h>
-#include <asm/mpc52xx.h>
-#include <asm/ppc_sys.h>
-
-
-static u64 mpc52xx_dma_mask = 0xffffffffULL;
-
-static struct fsl_i2c_platform_data mpc52xx_fsl_i2c_pdata = {
-	.device_flags = FSL_I2C_DEV_CLOCK_5200,
-};
-
-
-/* We use relative offsets for IORESOURCE_MEM to be independent from the
- * MBAR location at compile time
- */
-
-/* TODO Add the BestComm initiator channel to the device definitions,
-   possibly using IORESOURCE_DMA. But that's when BestComm is ready ... */
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC52xx_MSCAN1] = {
-		.name		= "mpc52xx-mscan",
-		.id		= 0,
-		.num_resources	= 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x0900,
-				.end	= 0x097f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_MSCAN1_IRQ,
-				.end	= MPC52xx_MSCAN1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_MSCAN2] = {
-		.name		= "mpc52xx-mscan",
-		.id		= 1,
-		.num_resources	= 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x0980,
-				.end	= 0x09ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_MSCAN2_IRQ,
-				.end	= MPC52xx_MSCAN2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_SPI] = {
-		.name		= "mpc52xx-spi",
-		.id		= -1,
-		.num_resources	= 3,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x0f00,
-				.end	= 0x0f1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "modf",
-				.start	= MPC52xx_SPI_MODF_IRQ,
-				.end	= MPC52xx_SPI_MODF_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "spif",
-				.start	= MPC52xx_SPI_SPIF_IRQ,
-				.end	= MPC52xx_SPI_SPIF_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_USB] = {
-		.name		= "ppc-soc-ohci",
-		.id		= -1,
-		.num_resources	= 2,
-		.dev.dma_mask	= &mpc52xx_dma_mask,
-		.dev.coherent_dma_mask = 0xffffffffULL,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x1000,
-				.end	= 0x10ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_USB_IRQ,
-				.end	= MPC52xx_USB_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_BDLC] = {
-		.name		= "mpc52xx-bdlc",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x1300,
-				.end	= 0x130f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_BDLC_IRQ,
-				.end	= MPC52xx_BDLC_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC1] = {
-		.name		= "mpc52xx-psc",
-		.id		= 0,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2000,
-				.end	= 0x209f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC1_IRQ,
-				.end	= MPC52xx_PSC1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC2] = {
-		.name		= "mpc52xx-psc",
-		.id		= 1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2200,
-				.end	= 0x229f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC2_IRQ,
-				.end	= MPC52xx_PSC2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC3] = {
-		.name		= "mpc52xx-psc",
-		.id		= 2,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2400,
-				.end	= 0x249f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC3_IRQ,
-				.end	= MPC52xx_PSC3_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC4] = {
-		.name		= "mpc52xx-psc",
-		.id		= 3,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2600,
-				.end	= 0x269f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC4_IRQ,
-				.end	= MPC52xx_PSC4_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC5] = {
-		.name		= "mpc52xx-psc",
-		.id		= 4,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2800,
-				.end	= 0x289f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC5_IRQ,
-				.end	= MPC52xx_PSC5_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC6] = {
-		.name		= "mpc52xx-psc",
-		.id		= 5,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2c00,
-				.end	= 0x2c9f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC6_IRQ,
-				.end	= MPC52xx_PSC6_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_FEC] = {
-		.name		= "mpc52xx-fec",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3000,
-				.end	= 0x33ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_FEC_IRQ,
-				.end	= MPC52xx_FEC_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_ATA] = {
-		.name		= "mpc52xx-ata",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3a00,
-				.end	= 0x3aff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_ATA_IRQ,
-				.end	= MPC52xx_ATA_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_I2C1] = {
-		.name		= "fsl-i2c",
-		.id		= 0,
-		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3d00,
-				.end	= 0x3d1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_I2C1_IRQ,
-				.end	= MPC52xx_I2C1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_I2C2] = {
-		.name		= "fsl-i2c",
-		.id		= 1,
-		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3d40,
-				.end	= 0x3d5f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_I2C2_IRQ,
-				.end	= MPC52xx_I2C2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-};
-
-
-static int __init mach_mpc52xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource(pdev, MPC52xx_MBAR);
-	return 0;
-}
-
-static int __init mach_mpc52xx_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc52xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc52xx_init);
diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c
deleted file mode 100644
index 20a0eac0dc3a..000000000000
--- a/arch/ppc/syslib/mpc52xx_pci.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * PCI code for the Freescale MPC52xx embedded CPU.
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <asm/pci.h>
-
-#include <asm/mpc52xx.h>
-#include "mpc52xx_pci.h"
-
-#include <asm/delay.h>
-#include <asm/machdep.h>
-
-
-/* This macro is defined to activate the workaround for the bug
-   435 of the MPC5200 (L25R). With it activated, we don't do any
-   32 bits configuration access during type-1 cycles */
-#define MPC5200_BUG_435_WORKAROUND
-
-
-static int
-mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				int offset, int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	u32 value;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr,
-		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
-		(devfn << 8) |
-		(offset & 0xfc));
-	mb();
-
-#ifdef MPC5200_BUG_435_WORKAROUND
-	if (bus->number != hose->bus_offset) {
-		switch (len) {
-			case 1:
-				value = in_8(((u8 __iomem *)hose->cfg_data) + (offset & 3));
-				break;
-			case 2:
-				value = in_le16(((u16 __iomem *)hose->cfg_data) + ((offset>>1) & 1));
-				break;
-
-			default:
-				value = in_le16((u16 __iomem *)hose->cfg_data) |
-					(in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16);
-				break;
-		}
-	}
-	else
-#endif
-	{
-		value = in_le32(hose->cfg_data);
-
-		if (len != 4) {
-			value >>= ((offset & 0x3) << 3);
-			value &= 0xffffffff >> (32 - (len << 3));
-		}
-	}
-
-	*val = value;
-
-	out_be32(hose->cfg_addr, 0);
-	mb();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-				int offset, int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	u32 value, mask;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr,
-		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
-		(devfn << 8) |
-		(offset & 0xfc));
-	mb();
-
-#ifdef MPC5200_BUG_435_WORKAROUND
-	if (bus->number != hose->bus_offset) {
-		switch (len) {
-			case 1:
-				out_8(((u8 __iomem *)hose->cfg_data) +
-					(offset & 3), val);
-				break;
-			case 2:
-				out_le16(((u16 __iomem *)hose->cfg_data) +
-					((offset>>1) & 1), val);
-				break;
-
-			default:
-				out_le16((u16 __iomem *)hose->cfg_data,
-					(u16)val);
-				out_le16(((u16 __iomem *)hose->cfg_data) + 1,
-					(u16)(val>>16));
-				break;
-		}
-	}
-	else
-#endif
-	{
-		if (len != 4) {
-			value = in_le32(hose->cfg_data);
-
-			offset = (offset & 0x3) << 3;
-			mask = (0xffffffff >> (32 - (len << 3)));
-			mask <<= offset;
-
-			value &= ~mask;
-			val = value | ((val << offset) & mask);
-		}
-
-		out_le32(hose->cfg_data, val);
-	}
-	mb();
-
-	out_be32(hose->cfg_addr, 0);
-	mb();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops mpc52xx_pci_ops = {
-	.read  = mpc52xx_pci_read_config,
-	.write = mpc52xx_pci_write_config
-};
-
-
-static void __init
-mpc52xx_pci_setup(struct mpc52xx_pci __iomem *pci_regs)
-{
-	u32 tmp;
-
-	/* Setup control regs */
-	tmp = in_be32(&pci_regs->scr);
-	tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	out_be32(&pci_regs->scr, tmp);
-
-	/* Setup windows */
-	out_be32(&pci_regs->iw0btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_MEM_START + MPC52xx_PCI_MEM_OFFSET,
-		MPC52xx_PCI_MEM_START,
-		MPC52xx_PCI_MEM_SIZE ));
-
-	out_be32(&pci_regs->iw1btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_MMIO_START + MPC52xx_PCI_MEM_OFFSET,
-		MPC52xx_PCI_MMIO_START,
-		MPC52xx_PCI_MMIO_SIZE ));
-
-	out_be32(&pci_regs->iw2btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_IO_BASE,
-		MPC52xx_PCI_IO_START,
-		MPC52xx_PCI_IO_SIZE ));
-
-	out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw0btar */
-		  MPC52xx_PCI_IWCR_READ_MULTI |
-		  MPC52xx_PCI_IWCR_MEM ),
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw1btar */
-		  MPC52xx_PCI_IWCR_READ |
-		  MPC52xx_PCI_IWCR_MEM ),
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw2btar */
-		  MPC52xx_PCI_IWCR_IO )
-	));
-
-
-	out_be32(&pci_regs->tbatr0,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
-	out_be32(&pci_regs->tbatr1,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
-
-	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
-
-	/* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
-	/* Not necessary and can be a bad thing if for example the bootloader
-	   is displaying a splash screen or ... Just left here for
-	   documentation purpose if anyone need it */
-	tmp = in_be32(&pci_regs->gscr);
-#if 0
-	out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR);
-	udelay(50);
-#endif
-	out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR);
-}
-
-static void
-mpc52xx_pci_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-
-	/* We don't rely on boot loader for PCI and resets all
-	   devices */
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = &dev->resource[i];
-		if (res->end > res->start) {	/* Only valid resources */
-			res->end -= res->start;
-			res->start = 0;
-			res->flags |= IORESOURCE_UNSET;
-		}
-	}
-
-	/* The PCI Host bridge of MPC52xx has a prefetch memory resource
-	   fixed to 1Gb. Doesn't fit in the resource system so we remove it */
-	if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
-	     (   dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
-	      || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
-		struct resource *res = &dev->resource[1];
-		res->start = res->end = res->flags = 0;
-	}
-}
-
-void __init
-mpc52xx_find_bridges(void)
-{
-	struct mpc52xx_pci __iomem *pci_regs;
-	struct pci_controller *hose;
-
-	pci_assign_all_buses = 1;
-
-	pci_regs = ioremap(MPC52xx_PA(MPC52xx_PCI_OFFSET), MPC52xx_PCI_SIZE);
-	if (!pci_regs)
-		return;
-
-	hose = pcibios_alloc_controller();
-	if (!hose) {
-		iounmap(pci_regs);
-		return;
-	}
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->bus_offset = 0;
-	hose->ops = &mpc52xx_pci_ops;
-
-	mpc52xx_pci_setup(pci_regs);
-
-	hose->pci_mem_offset = MPC52xx_PCI_MEM_OFFSET;
-
-	hose->io_base_virt = ioremap(MPC52xx_PCI_IO_BASE, MPC52xx_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	hose->cfg_addr = &pci_regs->car;
-	hose->cfg_data = hose->io_base_virt;
-
-	/* Setup resources */
-	pci_init_resource(&hose->mem_resources[0],
-			MPC52xx_PCI_MEM_START,
-			MPC52xx_PCI_MEM_STOP,
-			IORESOURCE_MEM|IORESOURCE_PREFETCH,
-			"PCI prefetchable memory");
-
-	pci_init_resource(&hose->mem_resources[1],
-			MPC52xx_PCI_MMIO_START,
-			MPC52xx_PCI_MMIO_STOP,
-			IORESOURCE_MEM,
-			"PCI memory");
-
-	pci_init_resource(&hose->io_resource,
-			MPC52xx_PCI_IO_START,
-			MPC52xx_PCI_IO_STOP,
-			IORESOURCE_IO,
-			"PCI I/O");
-
-}
diff --git a/arch/ppc/syslib/mpc52xx_pci.h b/arch/ppc/syslib/mpc52xx_pci.h
deleted file mode 100644
index 77d47dbba85e..000000000000
--- a/arch/ppc/syslib/mpc52xx_pci.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * PCI Include file the Freescale MPC52xx embedded cpu chips
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Inspired from code written by Dale Farnsworth <dfarnsworth@mvista.com>
- * for the 2.4 kernel.
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __SYSLIB_MPC52xx_PCI_H__
-#define __SYSLIB_MPC52xx_PCI_H__
-
-/* ======================================================================== */
-/* PCI windows config                                                       */
-/* ======================================================================== */
-
-/*
- * Master windows : MPC52xx -> PCI
- *
- *  0x80000000 -> 0x9FFFFFFF       PCI Mem prefetchable          IW0BTAR
- *  0xA0000000 -> 0xAFFFFFFF       PCI Mem                       IW1BTAR
- *  0xB0000000 -> 0xB0FFFFFF       PCI IO                        IW2BTAR
- *
- * Slave windows  : PCI -> MPC52xx
- *
- *  0xF0000000 -> 0xF003FFFF       MPC52xx MBAR                  TBATR0
- *  0x00000000 -> 0x3FFFFFFF       MPC52xx local memory          TBATR1
- */
-
-#define MPC52xx_PCI_MEM_OFFSET 	0x00000000	/* Offset for MEM MMIO */
-
-#define MPC52xx_PCI_MEM_START	0x80000000
-#define MPC52xx_PCI_MEM_SIZE	0x20000000
-#define MPC52xx_PCI_MEM_STOP	(MPC52xx_PCI_MEM_START+MPC52xx_PCI_MEM_SIZE-1)
-
-#define MPC52xx_PCI_MMIO_START	0xa0000000
-#define MPC52xx_PCI_MMIO_SIZE	0x10000000
-#define MPC52xx_PCI_MMIO_STOP	(MPC52xx_PCI_MMIO_START+MPC52xx_PCI_MMIO_SIZE-1)
-
-#define MPC52xx_PCI_IO_BASE	0xb0000000
-
-#define MPC52xx_PCI_IO_START	0x00000000
-#define MPC52xx_PCI_IO_SIZE	0x01000000
-#define MPC52xx_PCI_IO_STOP	(MPC52xx_PCI_IO_START+MPC52xx_PCI_IO_SIZE-1)
-
-
-#define MPC52xx_PCI_TARGET_IO	MPC52xx_MBAR
-#define MPC52xx_PCI_TARGET_MEM	0x00000000
-
-
-/* ======================================================================== */
-/* Structures mapping & Defines for PCI Unit                                */
-/* ======================================================================== */
-
-#define MPC52xx_PCI_GSCR_BM		0x40000000
-#define MPC52xx_PCI_GSCR_PE		0x20000000
-#define MPC52xx_PCI_GSCR_SE		0x10000000
-#define MPC52xx_PCI_GSCR_XLB2PCI_MASK	0x07000000
-#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT	24
-#define MPC52xx_PCI_GSCR_IPG2PCI_MASK	0x00070000
-#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT	16
-#define MPC52xx_PCI_GSCR_BME		0x00004000
-#define MPC52xx_PCI_GSCR_PEE		0x00002000
-#define MPC52xx_PCI_GSCR_SEE		0x00001000
-#define MPC52xx_PCI_GSCR_PR		0x00000001
-
-
-#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size)	  \
-		( ( (proc_ad) & 0xff000000 )			| \
-		  ( (((size) - 1) >> 8) & 0x00ff0000 )		| \
-		  ( ((pci_ad) >> 16) & 0x0000ff00 ) )
-
-#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2)	(((win0) << 24) | \
-						 ((win1) << 16) | \
-						 ((win2) <<  8))
-
-#define MPC52xx_PCI_IWCR_DISABLE	0x0
-#define MPC52xx_PCI_IWCR_ENABLE		0x1
-#define MPC52xx_PCI_IWCR_READ		0x0
-#define MPC52xx_PCI_IWCR_READ_LINE	0x2
-#define MPC52xx_PCI_IWCR_READ_MULTI	0x4
-#define MPC52xx_PCI_IWCR_MEM		0x0
-#define MPC52xx_PCI_IWCR_IO		0x8
-
-#define MPC52xx_PCI_TCR_P		0x01000000
-#define MPC52xx_PCI_TCR_LD		0x00010000
-
-#define MPC52xx_PCI_TBATR_DISABLE	0x0
-#define MPC52xx_PCI_TBATR_ENABLE	0x1
-
-
-#ifndef __ASSEMBLY__
-
-struct mpc52xx_pci {
-	u32	idr;		/* PCI + 0x00 */
-	u32	scr;		/* PCI + 0x04 */
-	u32	ccrir;		/* PCI + 0x08 */
-	u32	cr1;		/* PCI + 0x0C */
-	u32	bar0;		/* PCI + 0x10 */
-	u32	bar1;		/* PCI + 0x14 */
-	u8	reserved1[16];	/* PCI + 0x18 */
-	u32	ccpr;		/* PCI + 0x28 */
-	u32	sid;		/* PCI + 0x2C */
-	u32	erbar;		/* PCI + 0x30 */
-	u32	cpr;		/* PCI + 0x34 */
-	u8	reserved2[4];	/* PCI + 0x38 */
-	u32	cr2;		/* PCI + 0x3C */
-	u8	reserved3[32];	/* PCI + 0x40 */
-	u32	gscr;		/* PCI + 0x60 */
-	u32	tbatr0;		/* PCI + 0x64 */
-	u32	tbatr1;		/* PCI + 0x68 */
-	u32	tcr;		/* PCI + 0x6C */
-	u32	iw0btar;	/* PCI + 0x70 */
-	u32	iw1btar;	/* PCI + 0x74 */
-	u32	iw2btar;	/* PCI + 0x78 */
-	u8	reserved4[4];	/* PCI + 0x7C */
-	u32	iwcr;		/* PCI + 0x80 */
-	u32	icr;		/* PCI + 0x84 */
-	u32	isr;		/* PCI + 0x88 */
-	u32	arb;		/* PCI + 0x8C */
-	u8	reserved5[104];	/* PCI + 0x90 */
-	u32	car;		/* PCI + 0xF8 */
-	u8	reserved6[4];	/* PCI + 0xFC */
-};
-
-#endif  /* __ASSEMBLY__ */
-
-
-#endif  /* __SYSLIB_MPC52xx_PCI_H__ */
diff --git a/arch/ppc/syslib/mpc52xx_pic.c b/arch/ppc/syslib/mpc52xx_pic.c
deleted file mode 100644
index f58149c03b0f..000000000000
--- a/arch/ppc/syslib/mpc52xx_pic.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Programmable Interrupt Controller functions for the Freescale MPC52xx 
- * embedded CPU.
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based on (well, mostly copied from) the code from the 2.4 kernel by
- * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- * 
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mpc52xx.h>
-
-
-static struct mpc52xx_intr __iomem *intr;
-static struct mpc52xx_sdma __iomem *sdma;
-
-static void
-mpc52xx_ic_disable(unsigned int irq)
-{
-	u32 val;
-
-	if (irq == MPC52xx_IRQ0) {
-		val = in_be32(&intr->ctrl);
-		val &= ~(1 << 11);
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_IRQ1) {
-		BUG();
-	}
-	else if (irq <= MPC52xx_IRQ3) {
-		val = in_be32(&intr->ctrl);
-		val &= ~(1 << (10 - (irq - MPC52xx_IRQ1)));
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
-		val = in_be32(&intr->main_mask);
-		val |= 1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE));
-		out_be32(&intr->main_mask, val);
-	}
-	else if (irq < MPC52xx_PERP_IRQ_BASE) {
-		val = in_be32(&sdma->IntMask);
-		val |= 1 << (irq - MPC52xx_SDMA_IRQ_BASE);
-		out_be32(&sdma->IntMask, val);
-	}
-	else {
-		val = in_be32(&intr->per_mask);
-		val |= 1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE));
-		out_be32(&intr->per_mask, val);
-	}
-}
-
-static void
-mpc52xx_ic_enable(unsigned int irq)
-{
-	u32 val;
-
-	if (irq == MPC52xx_IRQ0) {
-		val = in_be32(&intr->ctrl);
-		val |= 1 << 11;
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_IRQ1) {
-		BUG();
-	}
-	else if (irq <= MPC52xx_IRQ3) {
-		val = in_be32(&intr->ctrl);
-		val |= 1 << (10 - (irq - MPC52xx_IRQ1));
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
-		val = in_be32(&intr->main_mask);
-		val &= ~(1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE)));
-		out_be32(&intr->main_mask, val);
-	}
-	else if (irq < MPC52xx_PERP_IRQ_BASE) {
-		val = in_be32(&sdma->IntMask);
-		val &= ~(1 << (irq - MPC52xx_SDMA_IRQ_BASE));
-		out_be32(&sdma->IntMask, val);
-	}
-	else {
-		val = in_be32(&intr->per_mask);
-		val &= ~(1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE)));
-		out_be32(&intr->per_mask, val);
-	}
-}
-
-static void
-mpc52xx_ic_ack(unsigned int irq)
-{
-	u32 val;
-
-	/*
-	 * Only some irqs are reset here, others in interrupting hardware.
-	 */
-
-	switch (irq) {
-	case MPC52xx_IRQ0:
-		val = in_be32(&intr->ctrl);
-		val |= 0x08000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_CCS_IRQ:
-		val = in_be32(&intr->enc_status);
-		val |= 0x00000400;
-		out_be32(&intr->enc_status, val);
-		break;
-	case MPC52xx_IRQ1:
-		val = in_be32(&intr->ctrl);
-		val |= 0x04000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_IRQ2:
-		val = in_be32(&intr->ctrl);
-		val |= 0x02000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_IRQ3:
-		val = in_be32(&intr->ctrl);
-		val |= 0x01000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	default:
-		if (irq >= MPC52xx_SDMA_IRQ_BASE
-		    && irq < (MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM)) {
-			out_be32(&sdma->IntPend,
-				 1 << (irq - MPC52xx_SDMA_IRQ_BASE));
-		}
-		break;
-	}
-}
-
-static void
-mpc52xx_ic_disable_and_ack(unsigned int irq)
-{
-	mpc52xx_ic_disable(irq);
-	mpc52xx_ic_ack(irq);
-}
-
-static void
-mpc52xx_ic_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		mpc52xx_ic_enable(irq);
-}
-
-static struct hw_interrupt_type mpc52xx_ic = {
-	.typename	= " MPC52xx  ",
-	.enable		= mpc52xx_ic_enable,
-	.disable	= mpc52xx_ic_disable,
-	.ack		= mpc52xx_ic_disable_and_ack,
-	.end		= mpc52xx_ic_end,
-};
-
-void __init
-mpc52xx_init_irq(void)
-{
-	int i;
-	u32 intr_ctrl;
-
-	/* Remap the necessary zones */
-	intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
-	sdma = ioremap(MPC52xx_PA(MPC52xx_SDMA_OFFSET), MPC52xx_SDMA_SIZE);
-
-	if ((intr==NULL) || (sdma==NULL))
-		panic("Can't ioremap PIC/SDMA register for init_irq !");
-
-	/* Disable all interrupt sources. */
-	out_be32(&sdma->IntPend, 0xffffffff);	/* 1 means clear pending */
-	out_be32(&sdma->IntMask, 0xffffffff);	/* 1 means disabled */
-	out_be32(&intr->per_mask, 0x7ffffc00);	/* 1 means disabled */
-	out_be32(&intr->main_mask, 0x00010fff);	/* 1 means disabled */
-	intr_ctrl = in_be32(&intr->ctrl);
-	intr_ctrl &=    0x00ff0000;	/* Keeps IRQ[0-3] config */
-	intr_ctrl |=	0x0f000000 |	/* clear IRQ 0-3 */
-			0x00001000 |	/* MEE master external enable */
-			0x00000000 |	/* 0 means disable IRQ 0-3 */
-			0x00000001;	/* CEb route critical normally */
-	out_be32(&intr->ctrl, intr_ctrl);
-
-	/* Zero a bunch of the priority settings.  */
-	out_be32(&intr->per_pri1, 0);
-	out_be32(&intr->per_pri2, 0);
-	out_be32(&intr->per_pri3, 0);
-	out_be32(&intr->main_pri1, 0);
-	out_be32(&intr->main_pri2, 0);
-
-	/* Initialize irq_desc[i].chip's with mpc52xx_ic. */
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].chip = &mpc52xx_ic;
-		irq_desc[i].status = IRQ_LEVEL;
-	}
-
-	#define IRQn_MODE(intr_ctrl,irq) (((intr_ctrl) >> (22-(i<<1))) & 0x03)
-	for (i=0 ; i<4 ; i++) {
-		int mode;
-		mode = IRQn_MODE(intr_ctrl,i);
-		if ((mode == 0x1) || (mode == 0x2))
-			irq_desc[i?MPC52xx_IRQ1+i-1:MPC52xx_IRQ0].status = 0;
-	}
-}
-
-int
-mpc52xx_get_irq(void)
-{
-	u32 status;
-	int irq = -1;
-
-	status = in_be32(&intr->enc_status);
-
-	if (status & 0x00000400) {		/* critical */
-		irq = (status >> 8) & 0x3;
-		if (irq == 2)			/* high priority peripheral */
-			goto peripheral;
-		irq += MPC52xx_CRIT_IRQ_BASE;
-	}
-	else if (status & 0x00200000) {		/* main */
-		irq = (status >> 16) & 0x1f;
-		if (irq == 4)			/* low priority peripheral */
-			goto peripheral;
-		irq += MPC52xx_MAIN_IRQ_BASE;
-	}
-	else if (status & 0x20000000) {		/* peripheral */
-peripheral:
-		irq = (status >> 24) & 0x1f;
-		if (irq == 0) {			/* bestcomm */
-			status = in_be32(&sdma->IntPend);
-			irq = ffs(status) + MPC52xx_SDMA_IRQ_BASE-1;
-		}
-		else
-			irq += MPC52xx_PERP_IRQ_BASE;
-	}
-
-	return irq;
-}
-
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
deleted file mode 100644
index ab0cf4ced9e5..000000000000
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Common code for the boards based on Freescale MPC52xx embedded CPU.
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Support for other bootloaders than UBoot by Dale Farnsworth 
- * <dfarnsworth@mvista.com>
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- * 
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/spinlock.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/mpc52xx.h>
-#include <asm/mpc52xx_psc.h>
-#include <asm/pgtable.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/mpc52xx_pci.h>
-
-extern bd_t __res;
-
-static int core_mult[] = {		/* CPU Frequency multiplier, taken    */
-	0,  0,  0,  10, 20, 20, 25, 45,	/* from the datasheet used to compute */
-	30, 55, 40, 50, 0,  60, 35, 0,	/* CPU frequency from XLB freq and    */
-	30, 25, 65, 10, 70, 20, 75, 45,	/* external jumper config             */
-	0,  55, 40, 50, 80, 60, 35, 0
-};
-
-void
-mpc52xx_restart(char *cmd)
-{
-	struct mpc52xx_gpt __iomem *gpt0 = MPC52xx_VA(MPC52xx_GPTx_OFFSET(0));
-
-	local_irq_disable();
-
-	/* Turn on the watchdog and wait for it to expire. It effectively
-	  does a reset */
-	out_be32(&gpt0->count, 0x000000ff);
-	out_be32(&gpt0->mode, 0x00009004);
-
-	while (1);
-}
-
-void
-mpc52xx_halt(void)
-{
-	local_irq_disable();
-
-	while (1);
-}
-
-void
-mpc52xx_power_off(void)
-{
-	/* By default we don't have any way of shut down.
-	   If a specific board wants to, it can set the power down
-	   code to any hardware implementation dependent code */
-	mpc52xx_halt();
-}
-
-
-void __init
-mpc52xx_set_bat(void)
-{
-	/* Set BAT 2 to map the 0xf0000000 area */
-	/* This mapping is used during mpc52xx_progress,
-	 * mpc52xx_find_end_of_memory, and UARTs/GPIO access for debug
-	 */
-	mb();
-	mtspr(SPRN_DBAT2U, 0xf0001ffe);
-	mtspr(SPRN_DBAT2L, 0xf000002a);
-	mb();
-}
-
-void __init
-mpc52xx_map_io(void)
-{
-	/* Here we map the MBAR and the whole upper zone. MBAR is only
-	   64k but we can't map only 64k with BATs. Map the whole
-	   0xf0000000 range is ok and helps eventual lpb devices placed there */
-	io_block_mapping(
-		MPC52xx_MBAR_VIRT, MPC52xx_MBAR, 0x10000000, _PAGE_IO);
-}
-
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-#ifndef MPC52xx_PF_CONSOLE_PORT
-#error "mpc52xx PSC for console not selected"
-#endif
-
-static void
-mpc52xx_psc_putc(struct mpc52xx_psc __iomem *psc, unsigned char c)
-{
-	while (!(in_be16(&psc->mpc52xx_psc_status) &
-	         MPC52xx_PSC_SR_TXRDY));
-	out_8(&psc->mpc52xx_psc_buffer_8, c);
-}
-
-void
-mpc52xx_progress(char *s, unsigned short hex)
-{
-	char c;
-	struct mpc52xx_psc __iomem *psc;
-
-	psc = MPC52xx_VA(MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT));
-
-	while ((c = *s++) != 0) {
-		if (c == '\n')
-			mpc52xx_psc_putc(psc, '\r');
-		mpc52xx_psc_putc(psc, c);
-	}
-
-	mpc52xx_psc_putc(psc, '\r');
-	mpc52xx_psc_putc(psc, '\n');
-}
-
-#endif  /* CONFIG_SERIAL_TEXT_DEBUG */
-
-
-unsigned long __init
-mpc52xx_find_end_of_memory(void)
-{
-	u32 ramsize = __res.bi_memsize;
-
-	/*
-	 * if bootloader passed a memsize, just use it
-	 * else get size from sdram config registers
-	 */
-	if (ramsize == 0) {
-		struct mpc52xx_mmap_ctl __iomem *mmap_ctl;
-		u32 sdram_config_0, sdram_config_1;
-
-		/* Temp BAT2 mapping active when this is called ! */
-		mmap_ctl = MPC52xx_VA(MPC52xx_MMAP_CTL_OFFSET);
-
-		sdram_config_0 = in_be32(&mmap_ctl->sdram0);
-		sdram_config_1 = in_be32(&mmap_ctl->sdram1);
-
-		if ((sdram_config_0 & 0x1f) >= 0x13)
-			ramsize = 1 << ((sdram_config_0 & 0xf) + 17);
-
-		if (((sdram_config_1 & 0x1f) >= 0x13) &&
-				((sdram_config_1 & 0xfff00000) == ramsize))
-			ramsize += 1 << ((sdram_config_1 & 0xf) + 17);
-	}
-
-	return ramsize;
-}
-
-void __init
-mpc52xx_calibrate_decr(void)
-{
-	int current_time, previous_time;
-	int tbl_start, tbl_end;
-	unsigned int xlbfreq, cpufreq, ipbfreq, pcifreq, divisor;
-
-	xlbfreq = __res.bi_busfreq;
-	/* if bootloader didn't pass bus frequencies, calculate them */
-	if (xlbfreq == 0) {
-		/* Get RTC & Clock manager modules */
-		struct mpc52xx_rtc __iomem *rtc;
-		struct mpc52xx_cdm __iomem *cdm;
-
-		rtc = ioremap(MPC52xx_PA(MPC52xx_RTC_OFFSET), MPC52xx_RTC_SIZE);
-		cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-
-		if ((rtc==NULL) || (cdm==NULL))
-			panic("Can't ioremap RTC/CDM while computing bus freq");
-
-		/* Count bus clock during 1/64 sec */
-		out_be32(&rtc->dividers, 0x8f1f0000);	/* Set RTC 64x faster */
-		previous_time = in_be32(&rtc->time);
-		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-		tbl_start = get_tbl();
-		previous_time = current_time;
-		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-		tbl_end = get_tbl();
-		out_be32(&rtc->dividers, 0xffff0000);	/* Restore RTC */
-
-		/* Compute all frequency from that & CDM settings */
-		xlbfreq = (tbl_end - tbl_start) << 8;
-		cpufreq = (xlbfreq * core_mult[in_be32(&cdm->rstcfg)&0x1f])/10;
-		ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ?
-					xlbfreq / 2 : xlbfreq;
-		switch (in_8(&cdm->pci_clk_sel) & 3) {
-		case 0:
-			pcifreq = ipbfreq;
-			break;
-		case 1:
-			pcifreq = ipbfreq / 2;
-			break;
-		default:
-			pcifreq = xlbfreq / 4;
-			break;
-		}
-		__res.bi_busfreq = xlbfreq;
-		__res.bi_intfreq = cpufreq;
-		__res.bi_ipbfreq = ipbfreq;
-		__res.bi_pcifreq = pcifreq;
-
-		/* Release mapping */
-		iounmap(rtc);
-		iounmap(cdm);
-	}
-
-	divisor = 4;
-
-	tb_ticks_per_jiffy = xlbfreq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
-}
-
-
-void __init
-mpc52xx_setup_cpu(void)
-{
-	struct mpc52xx_cdm  __iomem *cdm;
-	struct mpc52xx_xlb  __iomem *xlb;
-
-	/* Map zones */
-	cdm  = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-	xlb  = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
-
-	if (!cdm || !xlb) {
-		printk(KERN_ERR __FILE__ ": "
-			"Error while mapping CDM/XLB during "
-			"mpc52xx_setup_cpu\n");
-		goto unmap_regs;
-	}
-
-	/* Use internal 48 Mhz */
-	out_8(&cdm->ext_48mhz_en, 0x00);
-	out_8(&cdm->fd_enable, 0x01);
-	if (in_be32(&cdm->rstcfg) & 0x40)	/* Assumes 33Mhz clock */
-		out_be16(&cdm->fd_counters, 0x0001);
-	else
-		out_be16(&cdm->fd_counters, 0x5555);
-
-	/* Configure the XLB Arbiter priorities */
-	out_be32(&xlb->master_pri_enable, 0xff);
-	out_be32(&xlb->master_priority, 0x11111111);
-
-	/* Enable ram snooping for 1GB window */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
-	out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
-	/* Disable XLB pipelining */
-	/* (cfr errata 292. We could do this only just before ATA PIO
-	    transaction and re-enable it after ...) */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
-
-	/* Unmap reg zone */
-unmap_regs:
-	if (cdm)  iounmap(cdm);
-	if (xlb)  iounmap(xlb);
-}
-
-
-int mpc52xx_match_psc_function(int psc_idx, const char *func)
-{
-	struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;
-
-	while ((cf->id != -1) && (cf->func != NULL)) {
-		if ((cf->id == psc_idx) && !strcmp(cf->func,func))
-			return 1;
-		cf++;
-	}
-
-	return 0;
-}
-
-int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
-{
-	static DEFINE_SPINLOCK(lock);
-	struct mpc52xx_cdm __iomem *cdm;
-	unsigned long flags;
-	u16 mclken_div;
-	u16 __iomem *reg;
-	u32 mask;
-
-	cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-	if (!cdm) {
-		printk(KERN_ERR __FILE__ ": Error mapping CDM\n");
-		return -ENODEV;
-	}
-
-	mclken_div = 0x8000 | (clkdiv & 0x1FF);
-	switch (psc_id) {
-	case 1: reg = &cdm->mclken_div_psc1; mask = 0x20; break;
-	case 2: reg = &cdm->mclken_div_psc2; mask = 0x40; break;
-	case 3: reg = &cdm->mclken_div_psc3; mask = 0x80; break;
-	case 6: reg = &cdm->mclken_div_psc6; mask = 0x10; break;
-	default:
-		return -ENODEV;
-	}
-
-	/* Set the rate and enable the clock */
-	spin_lock_irqsave(&lock, flags);
-	out_be16(reg, mclken_div);
-	out_be32(&cdm->clk_enables, in_be32(&cdm->clk_enables) | mask);
-	spin_unlock_irqrestore(&lock, flags);
-
-	iounmap(cdm);
-	return 0;
-}
diff --git a/arch/ppc/syslib/mpc52xx_sys.c b/arch/ppc/syslib/mpc52xx_sys.c
deleted file mode 100644
index b4e6f978f057..000000000000
--- a/arch/ppc/syslib/mpc52xx_sys.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Freescale MPC52xx system descriptions
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name	= "5200",
-		.mask		= 0xffff0000,
-		.value		= 0x80110000,
-		.num_devices	= 15,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC52xx_MSCAN1, MPC52xx_MSCAN2, MPC52xx_SPI,
-			MPC52xx_USB, MPC52xx_BDLC, MPC52xx_PSC1, MPC52xx_PSC2,
-			MPC52xx_PSC3, MPC52xx_PSC4, MPC52xx_PSC5, MPC52xx_PSC6,
-			MPC52xx_FEC, MPC52xx_ATA, MPC52xx_I2C1, MPC52xx_I2C2,
-		},
-	},
-	{	/* default match */
-		.ppc_sys_name	= "",
-		.mask		= 0x00000000,
-		.value		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
deleted file mode 100644
index 80804eee5795..000000000000
--- a/arch/ppc/syslib/mpc8xx_devices.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * MPC8xx Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug<vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/mii.h>
-#include <asm/cpm1.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-
-/* We use offsets for IORESOURCE_MEM to do not set dependencies at compile time.
- * They will get fixed up by mach_mpc8xx_fixup
- */
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC8xx_CPM_FEC1] =	{
-		.name = "fsl-cpm-fec",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[])	{
-			{
-				.name 	= "regs",
-				.start	= 0xe00,
-				.end	= 0xe88,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_FEC1,
-				.end	= MPC8xx_INT_FEC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_FEC2] =	{
-		.name = "fsl-cpm-fec",
-		.id	= 2,
-		.num_resources = 2,
-		.resource = (struct resource[])	{
-			{
-				.name	= "regs",
-				.start	= 0x1e00,
-				.end	= 0x1e88,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_FEC2,
-				.end	= MPC8xx_INT_FEC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC1] = {
-		.name = "fsl-cpm-scc",
-		.id	= 1,
-		.num_resources = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa00,
-				.end	= 0xa18,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3c00,
-				.end 	= 0x3c7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC1,
-				.end	= MPC8xx_INT_SCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC2] = {
-		.name = "fsl-cpm-scc",
-		.id	= 2,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa20,
-				.end	= 0xa38,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3d00,
-				.end 	= 0x3d7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC2,
-				.end	= MPC8xx_INT_SCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC3] = {
-		.name = "fsl-cpm-scc",
-		.id	= 3,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa40,
-				.end	= 0xa58,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3e00,
-				.end 	= 0x3e7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC3,
-				.end	= MPC8xx_INT_SCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC4] = {
-		.name = "fsl-cpm-scc",
-		.id	= 4,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa60,
-				.end	= 0xa78,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3f00,
-				.end 	= 0x3f7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC4,
-				.end	= MPC8xx_INT_SCC4,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SMC1] = {
-		.name = "fsl-cpm-smc",
-		.id	= 1,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa80,
-				.end	= 0xa8f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x3e80,
-				.end	= 0x3ebf,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SMC1,
-				.end	= MPC8xx_INT_SMC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SMC2] = {
-		.name = "fsl-cpm-smc",
-		.id	= 2,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa90,
-				.end	= 0xa9f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
- 				.name	= "pram",
- 				.start	= 0x3f80,
- 				.end	= 0x3fbf,
- 				.flags	= IORESOURCE_MEM,
-
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SMC2,
-				.end	= MPC8xx_INT_SMC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-
-        [MPC8xx_MDIO_FEC] = {
-                .name = "fsl-cpm-fec-mdio",
-                .id = 0,
-                .num_resources = 0,
-
-        },
-
-};
-
-static int __init mach_mpc8xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource (pdev, IMAP_ADDR);
-	return 0;
-}
-
-static int __init mach_mpc8xx_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc8xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc8xx_init);
diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c
deleted file mode 100644
index 18ba1d7ff9f1..000000000000
--- a/arch/ppc/syslib/mpc8xx_sys.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MPC8xx System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec; 
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name	= "MPC86X",
-		.mask 		= 0xFFFFFFFF,
-		.value 		= 0x00000000,
-		.num_devices	= 8,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC8xx_CPM_FEC1,
-			MPC8xx_CPM_SCC1,
-			MPC8xx_CPM_SCC2,
-			MPC8xx_CPM_SCC3,
-			MPC8xx_CPM_SCC4,
-			MPC8xx_CPM_SMC1,
-			MPC8xx_CPM_SMC2,
-			MPC8xx_MDIO_FEC,
-		},
-	},
-	{
-		.ppc_sys_name	= "MPC885",
-		.mask 		= 0xFFFFFFFF,
-		.value 		= 0x00000000,
-		.num_devices	= 9,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC8xx_CPM_FEC1,
-			MPC8xx_CPM_FEC2,
-			MPC8xx_CPM_SCC1,
-			MPC8xx_CPM_SCC2,
-			MPC8xx_CPM_SCC3,
-			MPC8xx_CPM_SCC4,
-			MPC8xx_CPM_SMC1,
-			MPC8xx_CPM_SMC2,
-			MPC8xx_MDIO_FEC,
-		},
-	},
-	{	/* default match */
-		.ppc_sys_name	= "",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c
deleted file mode 100644
index 2dd2dc5cd404..000000000000
--- a/arch/ppc/syslib/mv64360_pic.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * Interrupt controller support for Marvell's MV64360.
- *
- * Author: Rabeeh Khoury <rabeeh@galileo.co.il>
- * Based on MV64360 PIC written by
- * Chris Zankel <chris@mvista.com>
- * Mark A. Greer <mgreer@mvista.com>
- *
- * Copyright 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/*
- * This file contains the specific functions to support the MV64360
- * interrupt controller.
- *
- * The MV64360 has two main interrupt registers (high and low) that
- * summarizes the interrupts generated by the units of the MV64360.
- * Each bit is assigned to an interrupt number, where the low register
- * are assigned from IRQ0 to IRQ31 and the high cause register
- * from IRQ32 to IRQ63
- * The GPP (General Purpose Pins) interrupts are assigned from IRQ64 (GPP0)
- * to IRQ95 (GPP31).
- * get_irq() returns the lowest interrupt number that is currently asserted.
- *
- * Note:
- *  - This driver does not initialize the GPP when used as an interrupt
- *    input.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-#ifdef CONFIG_IRQ_ALL_CPUS
-#error "The mv64360 does not support distribution of IRQs on all CPUs"
-#endif
-/* ========================== forward declaration ========================== */
-
-static void mv64360_unmask_irq(unsigned int);
-static void mv64360_mask_irq(unsigned int);
-static irqreturn_t mv64360_cpu_error_int_handler(int, void *);
-static irqreturn_t mv64360_sram_error_int_handler(int, void *);
-static irqreturn_t mv64360_pci_error_int_handler(int, void *);
-
-/* ========================== local declarations =========================== */
-
-struct hw_interrupt_type mv64360_pic = {
-	.typename = " mv64360  ",
-	.enable   = mv64360_unmask_irq,
-	.disable  = mv64360_mask_irq,
-	.ack      = mv64360_mask_irq,
-	.end      = mv64360_unmask_irq,
-};
-
-#define CPU_INTR_STR	"mv64360 cpu interface error"
-#define SRAM_INTR_STR	"mv64360 internal sram error"
-#define PCI0_INTR_STR	"mv64360 pci 0 error"
-#define PCI1_INTR_STR	"mv64360 pci 1 error"
-
-static struct mv64x60_handle bh;
-
-u32 mv64360_irq_base = 0;	/* MV64360 handles the next 96 IRQs from here */
-
-/* mv64360_init_irq()
- *
- * This function initializes the interrupt controller. It assigns
- * all interrupts from IRQ0 to IRQ95 to the mv64360 interrupt controller.
- *
- * Input Variable(s):
- *  None.
- *
- * Outpu. Variable(s):
- *  None.
- *
- * Returns:
- *  void
- *
- * Note:
- *  We register all GPP inputs as interrupt source, but disable them.
- */
-void __init
-mv64360_init_irq(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64360_init_irq: enter", 0x0);
-
-	bh.v_base = mv64x60_get_bridge_vbase();
-
-	ppc_cached_irq_mask[0] = 0;
-	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
-	ppc_cached_irq_mask[2] = 0;
-
-	/* disable all interrupts and clear current interrupts */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,ppc_cached_irq_mask[0]);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,ppc_cached_irq_mask[1]);
-
-	/* All interrupts are level interrupts */
-	for (i = mv64360_irq_base; i < (mv64360_irq_base + 96); i++) {
-		irq_desc[i].status |= IRQ_LEVEL;
-		irq_desc[i].chip = &mv64360_pic;
-	}
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64360_init_irq: exit", 0x0);
-}
-
-/* mv64360_get_irq()
- *
- * This function returns the lowest interrupt number of all interrupts that
- * are currently asserted.
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  int	<interrupt number> or -2 (bogus interrupt)
- *
- */
-int
-mv64360_get_irq(void)
-{
-	int irq;
-	int irq_gpp;
-
-#ifdef CONFIG_SMP
-	/*
-	 * Second CPU gets only doorbell (message) interrupts.
-	 * The doorbell interrupt is BIT28 in the main interrupt low cause reg.
-	 */
-	int cpu_nr = smp_processor_id();
-	if (cpu_nr == 1) {
-		if (!(mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO) &
-		      (1 << MV64x60_IRQ_DOORBELL)))
-			return -1;
-		return mv64360_irq_base + MV64x60_IRQ_DOORBELL;
-	}
-#endif
-
-	irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO);
-	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
-
-	if (irq == -1) {
-		irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_HI);
-		irq = __ilog2((irq & 0x1f0003f7) & ppc_cached_irq_mask[1]);
-
-		if (irq == -1)
-			irq = -2; /* bogus interrupt, should never happen */
-		else {
-			if ((irq >= 24) && (irq < MV64x60_IRQ_DOORBELL)) {
-				irq_gpp = mv64x60_read(&bh,
-					MV64x60_GPP_INTR_CAUSE);
-				irq_gpp = __ilog2(irq_gpp &
-					ppc_cached_irq_mask[2]);
-
-				if (irq_gpp == -1)
-					irq = -2;
-				else {
-					irq = irq_gpp + 64;
-					mv64x60_write(&bh,
-						MV64x60_GPP_INTR_CAUSE,
-						~(1 << (irq - 64)));
-				}
-			}
-			else
-				irq += 32;
-		}
-	}
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-
-	if (irq < 0)
-		return (irq);
-	else
-		return (mv64360_irq_base + irq);
-}
-
-/* mv64360_unmask_irq()
- *
- * This function enables an interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-mv64360_unmask_irq(unsigned int irq)
-{
-#ifdef CONFIG_SMP
-	/* second CPU gets only doorbell interrupts */
-	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
-		mv64x60_set_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
-				 (1 << MV64x60_IRQ_DOORBELL));
-		return;
-	}
-#endif
-	irq -= mv64360_irq_base;
-
-	if (irq > 31) {
-		if (irq > 63) /* unmask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
-	}
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] |= (1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-/* mv64360_mask_irq()
- *
- * This function disables the requested interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-mv64360_mask_irq(unsigned int irq)
-{
-#ifdef CONFIG_SMP
-	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
-		mv64x60_clr_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
-				 (1 << MV64x60_IRQ_DOORBELL));
-		return;
-	}
-#endif
-	irq -= mv64360_irq_base;
-
-	if (irq > 31) {
-		if (irq > 63) /* mask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
-	}
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] &= ~(1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-static irqreturn_t
-mv64360_cpu_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "mv64360_cpu_error_int_handler: %s 0x%08x\n",
-		"Error on CPU interface - Cause regiser",
-		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
-	printk(KERN_ERR "\tCPU error register dump:\n");
-	printk(KERN_ERR "\tAddress low  0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress high 0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData low     0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
-	printk(KERN_ERR "\tData high    0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-mv64360_sram_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "mv64360_sram_error_int_handler: %s 0x%08x\n",
-		"Error in internal SRAM - Cause register",
-		mv64x60_read(&bh, MV64360_SRAM_ERR_CAUSE));
-	printk(KERN_ERR "\tSRAM error register dump:\n");
-	printk(KERN_ERR "\tAddress Low  0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress High 0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData Low     0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_LO));
-	printk(KERN_ERR "\tData High    0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-		mv64x60_read(&bh, MV64360_SRAM_ERR_PARITY));
-	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-mv64360_pci_error_int_handler(int irq, void *dev_id)
-{
-	u32 val;
-	unsigned int pci_bus = (unsigned int)dev_id;
-
-	if (pci_bus == 0) {	/* Error on PCI 0 */
-		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"mv64360_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
-	}
-	if (pci_bus == 1) {	/* Error on PCI 1 */
-		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"mv64360_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of
- * errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as
- * well.  IOW, don't set bit 0.
- */
-#define MV64360_PCI0_ERR_MASK_VAL	0x00a50c24
-
-static int __init
-mv64360_register_hdlrs(void)
-{
-	int	rc;
-
-	/* Clear old errors and register CPU interface error intr handler */
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR + mv64360_irq_base,
-		mv64360_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, NULL)))
-		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
-
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000ff);
-
-	/* Clear old errors and register internal SRAM error intr handler */
-	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_SRAM_PAR_ERR + mv64360_irq_base,
-		mv64360_sram_error_int_handler,IRQF_DISABLED,SRAM_INTR_STR, NULL)))
-		printk(KERN_WARNING "Can't register SRAM error handler: %d",rc);
-
-	/* Clear old errors and register PCI 0 error intr handler */
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_PCI0 + mv64360_irq_base,
-			mv64360_pci_error_int_handler,
-			IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
-		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
-
-	/* Erratum FEr PCI-#16 says to clear bit 0 of PCI SERRn Mask reg. */
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_SERR_MASK,
-		mv64x60_read(&bh, MV64x60_PCI0_ERR_SERR_MASK) & ~0x1UL);
-
-	/* Clear old errors and register PCI 1 error intr handler */
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_PCI1 + mv64360_irq_base,
-			mv64360_pci_error_int_handler,
-			IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
-		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
-
-	/* Erratum FEr PCI-#16 says to clear bit 0 of PCI Intr Mask reg. */
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_SERR_MASK,
-		mv64x60_read(&bh, MV64x60_PCI1_ERR_SERR_MASK) & ~0x1UL);
-
-	return 0;
-}
-
-arch_initcall(mv64360_register_hdlrs);
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
deleted file mode 100644
index 418f3053de52..000000000000
--- a/arch/ppc/syslib/mv64x60.c
+++ /dev/null
@@ -1,2485 +0,0 @@
-/*
- * Common routines for the Marvell/Galileo Discovery line of host bridges
- * (gt64260, mv64360, mv64460, ...).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-
-
-u8 mv64x60_pci_exclude_bridge = 1;
-DEFINE_SPINLOCK(mv64x60_lock);
-
-static phys_addr_t 	mv64x60_bridge_pbase;
-static void 		__iomem *mv64x60_bridge_vbase;
-static u32		mv64x60_bridge_type = MV64x60_TYPE_INVALID;
-static u32		mv64x60_bridge_rev;
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-static struct pci_controller	sysfs_hose_a;
-#endif
-
-static u32 gt64260_translate_size(u32 base, u32 size, u32 num_bits);
-static u32 gt64260_untranslate_size(u32 base, u32 size, u32 num_bits);
-static void gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus,
-	u32 window, u32 base);
-static void gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base);
-static u32 gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void gt64260a_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void gt64260b_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-
-static u32 mv64360_translate_size(u32 base, u32 size, u32 num_bits);
-static u32 mv64360_untranslate_size(u32 base, u32 size, u32 num_bits);
-static void mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus,
-	u32 window, u32 base);
-static void mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base);
-static u32 mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-static void mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base);
-static void mv64360_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void mv64460_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-
-
-/*
- * Define tables that have the chip-specific info for each type of
- * Marvell bridge chip.
- */
-static struct mv64x60_chip_info gt64260a_ci __initdata = { /* GT64260A */
-	.translate_size		= gt64260_translate_size,
-	.untranslate_size	= gt64260_untranslate_size,
-	.set_pci2mem_window	= gt64260_set_pci2mem_window,
-	.set_pci2regs_window	= gt64260_set_pci2regs_window,
-	.is_enabled_32bit	= gt64260_is_enabled_32bit,
-	.enable_window_32bit	= gt64260_enable_window_32bit,
-	.disable_window_32bit	= gt64260_disable_window_32bit,
-	.enable_window_64bit	= gt64260_enable_window_64bit,
-	.disable_window_64bit	= gt64260_disable_window_64bit,
-	.disable_all_windows	= gt64260_disable_all_windows,
-	.chip_specific_init	= gt64260a_chip_specific_init,
-	.window_tab_32bit	= gt64260_32bit_windows,
-	.window_tab_64bit	= gt64260_64bit_windows,
-};
-
-static struct mv64x60_chip_info gt64260b_ci __initdata = { /* GT64260B */
-	.translate_size		= gt64260_translate_size,
-	.untranslate_size	= gt64260_untranslate_size,
-	.set_pci2mem_window	= gt64260_set_pci2mem_window,
-	.set_pci2regs_window	= gt64260_set_pci2regs_window,
-	.is_enabled_32bit	= gt64260_is_enabled_32bit,
-	.enable_window_32bit	= gt64260_enable_window_32bit,
-	.disable_window_32bit	= gt64260_disable_window_32bit,
-	.enable_window_64bit	= gt64260_enable_window_64bit,
-	.disable_window_64bit	= gt64260_disable_window_64bit,
-	.disable_all_windows	= gt64260_disable_all_windows,
-	.chip_specific_init	= gt64260b_chip_specific_init,
-	.window_tab_32bit	= gt64260_32bit_windows,
-	.window_tab_64bit	= gt64260_64bit_windows,
-};
-
-static struct mv64x60_chip_info mv64360_ci __initdata = { /* MV64360 */
-	.translate_size		= mv64360_translate_size,
-	.untranslate_size	= mv64360_untranslate_size,
-	.set_pci2mem_window	= mv64360_set_pci2mem_window,
-	.set_pci2regs_window	= mv64360_set_pci2regs_window,
-	.is_enabled_32bit	= mv64360_is_enabled_32bit,
-	.enable_window_32bit	= mv64360_enable_window_32bit,
-	.disable_window_32bit	= mv64360_disable_window_32bit,
-	.enable_window_64bit	= mv64360_enable_window_64bit,
-	.disable_window_64bit	= mv64360_disable_window_64bit,
-	.disable_all_windows	= mv64360_disable_all_windows,
-	.config_io2mem_windows	= mv64360_config_io2mem_windows,
-	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
-	.chip_specific_init	= mv64360_chip_specific_init,
-	.window_tab_32bit	= mv64360_32bit_windows,
-	.window_tab_64bit	= mv64360_64bit_windows,
-};
-
-static struct mv64x60_chip_info mv64460_ci __initdata = { /* MV64460 */
-	.translate_size		= mv64360_translate_size,
-	.untranslate_size	= mv64360_untranslate_size,
-	.set_pci2mem_window	= mv64360_set_pci2mem_window,
-	.set_pci2regs_window	= mv64360_set_pci2regs_window,
-	.is_enabled_32bit	= mv64360_is_enabled_32bit,
-	.enable_window_32bit	= mv64360_enable_window_32bit,
-	.disable_window_32bit	= mv64360_disable_window_32bit,
-	.enable_window_64bit	= mv64360_enable_window_64bit,
-	.disable_window_64bit	= mv64360_disable_window_64bit,
-	.disable_all_windows	= mv64360_disable_all_windows,
-	.config_io2mem_windows	= mv64360_config_io2mem_windows,
-	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
-	.chip_specific_init	= mv64460_chip_specific_init,
-	.window_tab_32bit	= mv64360_32bit_windows,
-	.window_tab_64bit	= mv64360_64bit_windows,
-};
-
-/*
- *****************************************************************************
- *
- *	Platform Device Definitions
- *
- *****************************************************************************
- */
-#ifdef CONFIG_SERIAL_MPSC
-static struct mpsc_shared_pdata mv64x60_mpsc_shared_pdata = {
-	.mrr_val		= 0x3ffffe38,
-	.rcrr_val		= 0,
-	.tcrr_val		= 0,
-	.intr_cause_val		= 0,
-	.intr_mask_val		= 0,
-};
-
-static struct resource mv64x60_mpsc_shared_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc routing base",
-		.start	= MV64x60_MPSC_ROUTING_OFFSET,
-		.end	= MV64x60_MPSC_ROUTING_OFFSET +
-			MPSC_ROUTING_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma intr base",
-		.start	= MV64x60_SDMA_INTR_OFFSET,
-		.end	= MV64x60_SDMA_INTR_OFFSET +
-			MPSC_SDMA_INTR_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mpsc_shared_device = { /* Shared device */
-	.name		= MPSC_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc_shared_resources),
-	.resource	= mv64x60_mpsc_shared_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc_shared_pdata,
-	},
-};
-
-static struct mpsc_pdata mv64x60_mpsc0_pdata = {
-	.mirror_regs		= 0,
-	.cache_mgmt		= 0,
-	.max_idle		= 0,
-	.default_baud		= 9600,
-	.default_bits		= 8,
-	.default_parity		= 'n',
-	.default_flow		= 'n',
-	.chr_1_val		= 0x00000000,
-	.chr_2_val		= 0x00000000,
-	.chr_10_val		= 0x00000003,
-	.mpcr_val		= 0,
-	.bcr_val		= 0,
-	.brg_can_tune		= 0,
-	.brg_clk_src		= 8,		/* Default to TCLK */
-	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
-};
-
-static struct resource mv64x60_mpsc0_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc 0 base",
-		.start	= MV64x60_MPSC_0_OFFSET,
-		.end	= MV64x60_MPSC_0_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma 0 base",
-		.start	= MV64x60_SDMA_0_OFFSET,
-		.end	= MV64x60_SDMA_0_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.name	= "brg 0 base",
-		.start	= MV64x60_BRG_0_OFFSET,
-		.end	= MV64x60_BRG_0_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.name	= "sdma 0 irq",
-		.start	= MV64x60_IRQ_SDMA_0,
-		.end	= MV64x60_IRQ_SDMA_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpsc0_device = {
-	.name		= MPSC_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc0_resources),
-	.resource	= mv64x60_mpsc0_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc0_pdata,
-	},
-};
-
-static struct mpsc_pdata mv64x60_mpsc1_pdata = {
-	.mirror_regs		= 0,
-	.cache_mgmt		= 0,
-	.max_idle		= 0,
-	.default_baud		= 9600,
-	.default_bits		= 8,
-	.default_parity		= 'n',
-	.default_flow		= 'n',
-	.chr_1_val		= 0x00000000,
-	.chr_1_val		= 0x00000000,
-	.chr_2_val		= 0x00000000,
-	.chr_10_val		= 0x00000003,
-	.mpcr_val		= 0,
-	.bcr_val		= 0,
-	.brg_can_tune		= 0,
-	.brg_clk_src		= 8,		/* Default to TCLK */
-	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
-};
-
-static struct resource mv64x60_mpsc1_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc 1 base",
-		.start	= MV64x60_MPSC_1_OFFSET,
-		.end	= MV64x60_MPSC_1_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma 1 base",
-		.start	= MV64x60_SDMA_1_OFFSET,
-		.end	= MV64x60_SDMA_1_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.name	= "brg 1 base",
-		.start	= MV64x60_BRG_1_OFFSET,
-		.end	= MV64x60_BRG_1_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.name	= "sdma 1 irq",
-		.start	= MV64360_IRQ_SDMA_1,
-		.end	= MV64360_IRQ_SDMA_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpsc1_device = {
-	.name		= MPSC_CTLR_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc1_resources),
-	.resource	= mv64x60_mpsc1_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc1_pdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-static struct resource mv64x60_eth_shared_resources[] = {
-	[0] = {
-		.name	= "ethernet shared base",
-		.start	= MV643XX_ETH_SHARED_REGS,
-		.end	= MV643XX_ETH_SHARED_REGS +
-					MV643XX_ETH_SHARED_REGS_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mv64x60_eth_shared_device = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth_shared_resources),
-	.resource	= mv64x60_eth_shared_resources,
-};
-
-#ifdef CONFIG_MV643XX_ETH_0
-static struct resource mv64x60_eth0_resources[] = {
-	[0] = {
-		.name	= "eth0 irq",
-		.start	= MV64x60_IRQ_ETH_0,
-		.end	= MV64x60_IRQ_ETH_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth0_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 0,
-};
-
-static struct platform_device eth0_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth0_resources),
-	.resource	= mv64x60_eth0_resources,
-	.dev = {
-		.platform_data = &eth0_pd,
-	},
-};
-#endif
-
-#ifdef CONFIG_MV643XX_ETH_1
-static struct resource mv64x60_eth1_resources[] = {
-	[0] = {
-		.name	= "eth1 irq",
-		.start	= MV64x60_IRQ_ETH_1,
-		.end	= MV64x60_IRQ_ETH_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 1,
-};
-
-static struct platform_device eth1_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth1_resources),
-	.resource	= mv64x60_eth1_resources,
-	.dev = {
-		.platform_data = &eth1_pd,
-	},
-};
-#endif
-
-#ifdef CONFIG_MV643XX_ETH_2
-static struct resource mv64x60_eth2_resources[] = {
-	[0] = {
-		.name	= "eth2 irq",
-		.start	= MV64x60_IRQ_ETH_2,
-		.end	= MV64x60_IRQ_ETH_2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth2_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 2,
-};
-
-static struct platform_device eth2_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth2_resources),
-	.resource	= mv64x60_eth2_resources,
-	.dev = {
-		.platform_data = &eth2_pd,
-	},
-};
-#endif
-#endif
-
-#ifdef	CONFIG_I2C_MV64XXX
-static struct mv64xxx_i2c_pdata mv64xxx_i2c_pdata = {
-	.freq_m			= 8,
-	.freq_n			= 3,
-	.timeout		= 1000, /* Default timeout of 1 second */
-};
-
-static struct resource mv64xxx_i2c_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mv64xxx i2c base",
-		.start	= MV64XXX_I2C_OFFSET,
-		.end	= MV64XXX_I2C_OFFSET + MV64XXX_I2C_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "mv64xxx i2c irq",
-		.start	= MV64x60_IRQ_I2C,
-		.end	= MV64x60_IRQ_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_device = {
-	.name		= MV64XXX_I2C_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64xxx_i2c_resources),
-	.resource	= mv64xxx_i2c_resources,
-	.dev = {
-		.platform_data = &mv64xxx_i2c_pdata,
-	},
-};
-#endif
-
-#ifdef CONFIG_WATCHDOG
-static struct mv64x60_wdt_pdata mv64x60_wdt_pdata = {
-	.timeout		= 10,  /* default watchdog expiry in seconds */
-	.bus_clk		= 133, /* default bus clock in MHz */
-};
-
-static struct resource mv64x60_wdt_resources[] = {
-	[0] = {
-		.name	= "mv64x60 wdt base",
-		.start	= MV64x60_WDT_WDC,
-		.end	= MV64x60_WDT_WDC + 8 - 1, /* two 32-bit registers */
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device wdt_device = {
-	.name		= MV64x60_WDT_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_wdt_resources),
-	.resource	= mv64x60_wdt_resources,
-	.dev = {
-		.platform_data = &mv64x60_wdt_pdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-static struct mv64xxx_pdata mv64xxx_pdata = {
-	.hs_reg_valid	= 0,
-};
-
-static struct platform_device mv64xxx_device = { /* general mv64x60 stuff */
-	.name	= MV64XXX_DEV_NAME,
-	.id	= 0,
-	.dev = {
-		.platform_data = &mv64xxx_pdata,
-	},
-};
-#endif
-
-static struct platform_device *mv64x60_pd_devs[] __initdata = {
-#ifdef CONFIG_SERIAL_MPSC
-	&mpsc_shared_device,
-	&mpsc0_device,
-	&mpsc1_device,
-#endif
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-	&mv64x60_eth_shared_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_0
-	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
-	&eth1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
-	&eth2_device,
-#endif
-#ifdef	CONFIG_I2C_MV64XXX
-	&i2c_device,
-#endif
-#ifdef	CONFIG_MV64X60_WDT
-	&wdt_device,
-#endif
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-	&mv64xxx_device,
-#endif
-};
-
-/*
- *****************************************************************************
- *
- *	Bridge Initialization Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_init()
- *
- * Initialize the bridge based on setting passed in via 'si'.  The bridge
- * handle, 'bh', will be set so that it can be used to make subsequent
- * calls to routines in this file.
- */
-int __init
-mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
-{
-	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64x60 initialization", 0x0);
-
-	spin_lock_init(&mv64x60_lock);
-	mv64x60_early_init(bh, si);
-
-	if (mv64x60_get_type(bh) || mv64x60_setup_for_chip(bh)) {
-		iounmap(bh->v_base);
-		bh->v_base = 0;
-		if (ppc_md.progress)
-			ppc_md.progress("mv64x60_init: Can't determine chip",0);
-		return -1;
-	}
-
-	bh->ci->disable_all_windows(bh, si);
-	mv64x60_get_mem_windows(bh, mem_windows);
-	mv64x60_config_cpu2mem_windows(bh, si, mem_windows);
-
-	if (bh->ci->config_io2mem_windows)
-		bh->ci->config_io2mem_windows(bh, si, mem_windows);
-	if (bh->ci->set_mpsc2regs_window)
-		bh->ci->set_mpsc2regs_window(bh, si->phys_reg_base);
-
-	if (si->pci_1.enable_bus) {
-		bh->io_base_b = (u32)ioremap(si->pci_1.pci_io.cpu_base,
-			si->pci_1.pci_io.size);
-		isa_io_base = bh->io_base_b;
-	}
-
-	if (si->pci_0.enable_bus) {
-		bh->io_base_a = (u32)ioremap(si->pci_0.pci_io.cpu_base,
-			si->pci_0.pci_io.size);
-		isa_io_base = bh->io_base_a;
-
-		mv64x60_alloc_hose(bh, MV64x60_PCI0_CONFIG_ADDR,
-			MV64x60_PCI0_CONFIG_DATA, &bh->hose_a);
-		mv64x60_config_resources(bh->hose_a, &si->pci_0, bh->io_base_a);
-		mv64x60_config_pci_params(bh->hose_a, &si->pci_0);
-
-		mv64x60_config_cpu2pci_windows(bh, &si->pci_0, 0);
-		mv64x60_config_pci2mem_windows(bh, bh->hose_a, &si->pci_0, 0,
-			mem_windows);
-		bh->ci->set_pci2regs_window(bh, bh->hose_a, 0,
-			si->phys_reg_base);
-	}
-
-	if (si->pci_1.enable_bus) {
-		mv64x60_alloc_hose(bh, MV64x60_PCI1_CONFIG_ADDR,
-			MV64x60_PCI1_CONFIG_DATA, &bh->hose_b);
-		mv64x60_config_resources(bh->hose_b, &si->pci_1, bh->io_base_b);
-		mv64x60_config_pci_params(bh->hose_b, &si->pci_1);
-
-		mv64x60_config_cpu2pci_windows(bh, &si->pci_1, 1);
-		mv64x60_config_pci2mem_windows(bh, bh->hose_b, &si->pci_1, 1,
-			mem_windows);
-		bh->ci->set_pci2regs_window(bh, bh->hose_b, 1,
-			si->phys_reg_base);
-	}
-
-	bh->ci->chip_specific_init(bh, si);
-	mv64x60_pd_fixup(bh, mv64x60_pd_devs, ARRAY_SIZE(mv64x60_pd_devs));
-
-	return 0;
-}
-
-/*
- * mv64x60_early_init()
- *
- * Do some bridge work that must take place before we start messing with
- * the bridge for real.
- */
-void __init
-mv64x60_early_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
-{
-	struct pci_controller	hose_a, hose_b;
-
-	memset(bh, 0, sizeof(*bh));
-
-	bh->p_base = si->phys_reg_base;
-	bh->v_base = ioremap(bh->p_base, MV64x60_INTERNAL_SPACE_SIZE);
-
-	mv64x60_bridge_pbase = bh->p_base;
-	mv64x60_bridge_vbase = bh->v_base;
-
-	/* Assuming pci mode [reserved] bits 4:5 on 64260 are 0 */
-	bh->pci_mode_a = mv64x60_read(bh, MV64x60_PCI0_MODE) &
-		MV64x60_PCIMODE_MASK;
-	bh->pci_mode_b = mv64x60_read(bh, MV64x60_PCI1_MODE) &
-		MV64x60_PCIMODE_MASK;
-
-	/* Need temporary hose structs to call mv64x60_set_bus() */
-	memset(&hose_a, 0, sizeof(hose_a));
-	memset(&hose_b, 0, sizeof(hose_b));
-	setup_indirect_pci_nomap(&hose_a, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
-	setup_indirect_pci_nomap(&hose_b, bh->v_base + MV64x60_PCI1_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI1_CONFIG_DATA);
-	bh->hose_a = &hose_a;
-	bh->hose_b = &hose_b;
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-	/* Save a copy of hose_a for sysfs functions -- hack */
-	memcpy(&sysfs_hose_a, &hose_a, sizeof(hose_a));
-#endif
-
-	mv64x60_set_bus(bh, 0, 0);
-	mv64x60_set_bus(bh, 1, 0);
-
-	bh->hose_a = NULL;
-	bh->hose_b = NULL;
-
-	/* Clear bit 0 of PCI addr decode control so PCI->CPU remap 1:1 */
-	mv64x60_clr_bits(bh, MV64x60_PCI0_PCI_DECODE_CNTL, 0x00000001);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_PCI_DECODE_CNTL, 0x00000001);
-
-	/* Bit 12 MUST be 0; set bit 27--don't auto-update cpu remap regs */
-	mv64x60_clr_bits(bh, MV64x60_CPU_CONFIG, (1<<12));
-	mv64x60_set_bits(bh, MV64x60_CPU_CONFIG, (1<<27));
-
-	mv64x60_set_bits(bh, MV64x60_PCI0_TO_RETRY, 0xffff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_TO_RETRY, 0xffff);
-}
-
-/*
- *****************************************************************************
- *
- *	Window Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_32bit_window()
- *
- * Determine the base address and size of a 32-bit window on the bridge.
- */
-void __init
-mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 *base, u32 *size)
-{
-	u32	val, base_reg, size_reg, base_bits, size_bits;
-	u32	(*get_from_field)(u32 val, u32 num_bits);
-
-	base_reg = bh->ci->window_tab_32bit[window].base_reg;
-
-	if (base_reg != 0) {
-		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
-		base_bits = bh->ci->window_tab_32bit[window].base_bits;
-		size_bits = bh->ci->window_tab_32bit[window].size_bits;
-		get_from_field= bh->ci->window_tab_32bit[window].get_from_field;
-
-		val = mv64x60_read(bh, base_reg);
-		*base = get_from_field(val, base_bits);
-
-		if (size_reg != 0) {
-			val = mv64x60_read(bh, size_reg);
-			val = get_from_field(val, size_bits);
-			*size = bh->ci->untranslate_size(*base, val, size_bits);
-		} else
-			*size = 0;
-	} else {
-		*base = 0;
-		*size = 0;
-	}
-
-	pr_debug("get 32bit window: %d, base: 0x%x, size: 0x%x\n",
-		window, *base, *size);
-}
-
-/*
- * mv64x60_set_32bit_window()
- *
- * Set the base address and size of a 32-bit window on the bridge.
- */
-void __init
-mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 base, u32 size, u32 other_bits)
-{
-	u32	val, base_reg, size_reg, base_bits, size_bits;
-	u32	(*map_to_field)(u32 val, u32 num_bits);
-
-	pr_debug("set 32bit window: %d, base: 0x%x, size: 0x%x, other: 0x%x\n",
-		window, base, size, other_bits);
-
-	base_reg = bh->ci->window_tab_32bit[window].base_reg;
-
-	if (base_reg != 0) {
-		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
-		base_bits = bh->ci->window_tab_32bit[window].base_bits;
-		size_bits = bh->ci->window_tab_32bit[window].size_bits;
-		map_to_field = bh->ci->window_tab_32bit[window].map_to_field;
-
-		val = map_to_field(base, base_bits) | other_bits;
-		mv64x60_write(bh, base_reg, val);
-
-		if (size_reg != 0) {
-			val = bh->ci->translate_size(base, size, size_bits);
-			val = map_to_field(val, size_bits);
-			mv64x60_write(bh, size_reg, val);
-		}
-
-		(void)mv64x60_read(bh, base_reg); /* Flush FIFO */
-	}
-}
-
-/*
- * mv64x60_get_64bit_window()
- *
- * Determine the base address and size of a 64-bit window on the bridge.
- */
-void __init
-mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 *base_hi, u32 *base_lo, u32 *size)
-{
-	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
-	u32	(*get_from_field)(u32 val, u32 num_bits);
-
-	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
-
-	if (base_lo_reg != 0) {
-		size_reg = bh->ci->window_tab_64bit[window].size_reg;
-		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
-		size_bits = bh->ci->window_tab_64bit[window].size_bits;
-		get_from_field= bh->ci->window_tab_64bit[window].get_from_field;
-
-		*base_hi = mv64x60_read(bh,
-			bh->ci->window_tab_64bit[window].base_hi_reg);
-
-		val = mv64x60_read(bh, base_lo_reg);
-		*base_lo = get_from_field(val, base_lo_bits);
-
-		if (size_reg != 0) {
-			val = mv64x60_read(bh, size_reg);
-			val = get_from_field(val, size_bits);
-			*size = bh->ci->untranslate_size(*base_lo, val,
-								size_bits);
-		} else
-			*size = 0;
-	} else {
-		*base_hi = 0;
-		*base_lo = 0;
-		*size = 0;
-	}
-
-	pr_debug("get 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
-		"size: 0x%x\n", window, *base_hi, *base_lo, *size);
-}
-
-/*
- * mv64x60_set_64bit_window()
- *
- * Set the base address and size of a 64-bit window on the bridge.
- */
-void __init
-mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 base_hi, u32 base_lo, u32 size, u32 other_bits)
-{
-	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
-	u32	(*map_to_field)(u32 val, u32 num_bits);
-
-	pr_debug("set 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
-		"size: 0x%x, other: 0x%x\n",
-		window, base_hi, base_lo, size, other_bits);
-
-	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
-
-	if (base_lo_reg != 0) {
-		size_reg = bh->ci->window_tab_64bit[window].size_reg;
-		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
-		size_bits = bh->ci->window_tab_64bit[window].size_bits;
-		map_to_field = bh->ci->window_tab_64bit[window].map_to_field;
-
-		mv64x60_write(bh, bh->ci->window_tab_64bit[window].base_hi_reg,
-			base_hi);
-
-		val = map_to_field(base_lo, base_lo_bits) | other_bits;
-		mv64x60_write(bh, base_lo_reg, val);
-
-		if (size_reg != 0) {
-			val = bh->ci->translate_size(base_lo, size, size_bits);
-			val = map_to_field(val, size_bits);
-			mv64x60_write(bh, size_reg, val);
-		}
-
-		(void)mv64x60_read(bh, base_lo_reg); /* Flush FIFO */
-	}
-}
-
-/*
- * mv64x60_mask()
- *
- * Take the high-order 'num_bits' of 'val' & mask off low bits.
- */
-u32 __init
-mv64x60_mask(u32 val, u32 num_bits)
-{
-	return val & (0xffffffff << (32 - num_bits));
-}
-
-/*
- * mv64x60_shift_left()
- *
- * Take the low-order 'num_bits' of 'val', shift left to align at bit 31 (MSB).
- */
-u32 __init
-mv64x60_shift_left(u32 val, u32 num_bits)
-{
-	return val << (32 - num_bits);
-}
-
-/*
- * mv64x60_shift_right()
- *
- * Take the high-order 'num_bits' of 'val', shift right to align at bit 0 (LSB).
- */
-u32 __init
-mv64x60_shift_right(u32 val, u32 num_bits)
-{
-	return val >> (32 - num_bits);
-}
-
-/*
- *****************************************************************************
- *
- *	Chip Identification Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_type()
- *
- * Determine the type of bridge chip we have.
- */
-int __init
-mv64x60_get_type(struct mv64x60_handle *bh)
-{
-	struct pci_controller hose;
-	u16	val;
-	u8	save_exclude;
-
-	memset(&hose, 0, sizeof(hose));
-	setup_indirect_pci_nomap(&hose, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	/* Sanity check of bridge's Vendor ID */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID, &val);
-
-	if (val != PCI_VENDOR_ID_MARVELL) {
-		mv64x60_pci_exclude_bridge = save_exclude;
-		return -1;
-	}
-
-	/* Get the revision of the chip */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_CLASS_REVISION,
-		&val);
-	bh->rev = (u32)(val & 0xff);
-
-	/* Figure out the type of Marvell bridge it is */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &val);
-	mv64x60_pci_exclude_bridge = save_exclude;
-
-	switch (val) {
-	case PCI_DEVICE_ID_MARVELL_GT64260:
-		switch (bh->rev) {
-		case GT64260_REV_A:
-			bh->type = MV64x60_TYPE_GT64260A;
-			break;
-
-		default:
-			printk(KERN_WARNING "Unsupported GT64260 rev %04x\n",
-				bh->rev);
-			/* Assume its similar to a 'B' rev and fallthru */
-		case GT64260_REV_B:
-			bh->type = MV64x60_TYPE_GT64260B;
-			break;
-		}
-		break;
-
-	case PCI_DEVICE_ID_MARVELL_MV64360:
-		/* Marvell won't tell me how to distinguish a 64361 & 64362 */
-		bh->type = MV64x60_TYPE_MV64360;
-		break;
-
-	case PCI_DEVICE_ID_MARVELL_MV64460:
-		bh->type = MV64x60_TYPE_MV64460;
-		break;
-
-	default:
-		printk(KERN_ERR "Unknown Marvell bridge type %04x\n", val);
-		return -1;
-	}
-
-	/* Hang onto bridge type & rev for PIC code */
-	mv64x60_bridge_type = bh->type;
-	mv64x60_bridge_rev = bh->rev;
-
-	return 0;
-}
-
-/*
- * mv64x60_setup_for_chip()
- *
- * Set 'bh' to use the proper set of routine for the bridge chip that we have.
- */
-int __init
-mv64x60_setup_for_chip(struct mv64x60_handle *bh)
-{
-	int	rc = 0;
-
-	/* Set up chip-specific info based on the chip/bridge type */
-	switch(bh->type) {
-	case MV64x60_TYPE_GT64260A:
-		bh->ci = &gt64260a_ci;
-		break;
-
-	case MV64x60_TYPE_GT64260B:
-		bh->ci = &gt64260b_ci;
-		break;
-
-	case MV64x60_TYPE_MV64360:
-		bh->ci = &mv64360_ci;
-		break;
-
-	case MV64x60_TYPE_MV64460:
-		bh->ci = &mv64460_ci;
-		break;
-
-	case MV64x60_TYPE_INVALID:
-	default:
-		if (ppc_md.progress)
-			ppc_md.progress("mv64x60: Unsupported bridge", 0x0);
-		printk(KERN_ERR "mv64x60: Unsupported bridge\n");
-		rc = -1;
-	}
-
-	return rc;
-}
-
-/*
- * mv64x60_get_bridge_vbase()
- *
- * Return the virtual address of the bridge's registers.
- */
-void __iomem *
-mv64x60_get_bridge_vbase(void)
-{
-	return mv64x60_bridge_vbase;
-}
-
-/*
- * mv64x60_get_bridge_type()
- *
- * Return the type of bridge on the platform.
- */
-u32
-mv64x60_get_bridge_type(void)
-{
-	return mv64x60_bridge_type;
-}
-
-/*
- * mv64x60_get_bridge_rev()
- *
- * Return the revision of the bridge on the platform.
- */
-u32
-mv64x60_get_bridge_rev(void)
-{
-	return mv64x60_bridge_rev;
-}
-
-/*
- *****************************************************************************
- *
- *	System Memory Window Related Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_mem_size()
- *
- * Calculate the amount of memory that the memory controller is set up for.
- * This should only be used by board-specific code if there is no other
- * way to determine the amount of memory in the system.
- */
-u32 __init
-mv64x60_get_mem_size(u32 bridge_base, u32 chip_type)
-{
-	struct mv64x60_handle	bh;
-	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
-	u32	rc = 0;
-
-	memset(&bh, 0, sizeof(bh));
-
-	bh.type = chip_type;
-	bh.v_base = (void *)bridge_base;
-
-	if (!mv64x60_setup_for_chip(&bh)) {
-		mv64x60_get_mem_windows(&bh, mem_windows);
-		rc = mv64x60_calc_mem_size(&bh, mem_windows);
-	}
-
-	return rc;
-}
-
-/*
- * mv64x60_get_mem_windows()
- *
- * Get the values in the memory controller & return in the 'mem_windows' array.
- */
-void __init
-mv64x60_get_mem_windows(struct mv64x60_handle *bh,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win))
-			mv64x60_get_32bit_window(bh, win,
-				&mem_windows[i][0], &mem_windows[i][1]);
-		else {
-			mem_windows[i][0] = 0;
-			mem_windows[i][1] = 0;
-		}
-}
-
-/*
- * mv64x60_calc_mem_size()
- *
- * Using the memory controller register values in 'mem_windows', determine
- * how much memory it is set up for.
- */
-u32 __init
-mv64x60_calc_mem_size(struct mv64x60_handle *bh,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, total = 0;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
-		total += mem_windows[i][1];
-
-	return total;
-}
-
-/*
- *****************************************************************************
- *
- *	CPU->System MEM, PCI Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_config_cpu2mem_windows()
- *
- * Configure CPU->Memory windows on the bridge.
- */
-static u32 prot_tab[] __initdata = {
-	MV64x60_CPU_PROT_0_WIN, MV64x60_CPU_PROT_1_WIN,
-	MV64x60_CPU_PROT_2_WIN, MV64x60_CPU_PROT_3_WIN
-};
-
-static u32 cpu_snoop_tab[] __initdata = {
-	MV64x60_CPU_SNOOP_0_WIN, MV64x60_CPU_SNOOP_1_WIN,
-	MV64x60_CPU_SNOOP_2_WIN, MV64x60_CPU_SNOOP_3_WIN
-};
-
-void __init
-mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	/* Set CPU protection & snoop windows */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_32bit_window(bh, prot_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				si->cpu_prot_options[i]);
-			bh->ci->enable_window_32bit(bh, prot_tab[i]);
-
-			if (bh->ci->window_tab_32bit[cpu_snoop_tab[i]].
-								base_reg != 0) {
-				mv64x60_set_32bit_window(bh, cpu_snoop_tab[i],
-					mem_windows[i][0], mem_windows[i][1],
-					si->cpu_snoop_options[i]);
-				bh->ci->enable_window_32bit(bh,
-					cpu_snoop_tab[i]);
-			}
-
-		}
-}
-
-/*
- * mv64x60_config_cpu2pci_windows()
- *
- * Configure the CPU->PCI windows for one of the PCI buses.
- */
-static u32 win_tab[2][4] __initdata = {
-	{ MV64x60_CPU2PCI0_IO_WIN, MV64x60_CPU2PCI0_MEM_0_WIN,
-	  MV64x60_CPU2PCI0_MEM_1_WIN, MV64x60_CPU2PCI0_MEM_2_WIN },
-	{ MV64x60_CPU2PCI1_IO_WIN, MV64x60_CPU2PCI1_MEM_0_WIN,
-	  MV64x60_CPU2PCI1_MEM_1_WIN, MV64x60_CPU2PCI1_MEM_2_WIN },
-};
-
-static u32 remap_tab[2][4] __initdata = {
-	{ MV64x60_CPU2PCI0_IO_REMAP_WIN, MV64x60_CPU2PCI0_MEM_0_REMAP_WIN,
-	  MV64x60_CPU2PCI0_MEM_1_REMAP_WIN, MV64x60_CPU2PCI0_MEM_2_REMAP_WIN },
-	{ MV64x60_CPU2PCI1_IO_REMAP_WIN, MV64x60_CPU2PCI1_MEM_0_REMAP_WIN,
-	  MV64x60_CPU2PCI1_MEM_1_REMAP_WIN, MV64x60_CPU2PCI1_MEM_2_REMAP_WIN }
-};
-
-void __init
-mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh,
-	struct mv64x60_pci_info *pi, u32 bus)
-{
-	int	i;
-
-	if (pi->pci_io.size > 0) {
-		mv64x60_set_32bit_window(bh, win_tab[bus][0],
-			pi->pci_io.cpu_base, pi->pci_io.size, pi->pci_io.swap);
-		mv64x60_set_32bit_window(bh, remap_tab[bus][0],
-			pi->pci_io.pci_base_lo, 0, 0);
-		bh->ci->enable_window_32bit(bh, win_tab[bus][0]);
-	} else /* Actually, the window should already be disabled */
-		bh->ci->disable_window_32bit(bh, win_tab[bus][0]);
-
-	for (i=0; i<3; i++)
-		if (pi->pci_mem[i].size > 0) {
-			mv64x60_set_32bit_window(bh, win_tab[bus][i+1],
-				pi->pci_mem[i].cpu_base, pi->pci_mem[i].size,
-				pi->pci_mem[i].swap);
-			mv64x60_set_64bit_window(bh, remap_tab[bus][i+1],
-				pi->pci_mem[i].pci_base_hi,
-				pi->pci_mem[i].pci_base_lo, 0, 0);
-			bh->ci->enable_window_32bit(bh, win_tab[bus][i+1]);
-		} else /* Actually, the window should already be disabled */
-			bh->ci->disable_window_32bit(bh, win_tab[bus][i+1]);
-}
-
-/*
- *****************************************************************************
- *
- *	PCI->System MEM Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_config_pci2mem_windows()
- *
- * Configure the PCI->Memory windows on the bridge.
- */
-static u32 pci_acc_tab[2][4] __initdata = {
-	{ MV64x60_PCI02MEM_ACC_CNTL_0_WIN, MV64x60_PCI02MEM_ACC_CNTL_1_WIN,
-	  MV64x60_PCI02MEM_ACC_CNTL_2_WIN, MV64x60_PCI02MEM_ACC_CNTL_3_WIN },
-	{ MV64x60_PCI12MEM_ACC_CNTL_0_WIN, MV64x60_PCI12MEM_ACC_CNTL_1_WIN,
-	  MV64x60_PCI12MEM_ACC_CNTL_2_WIN, MV64x60_PCI12MEM_ACC_CNTL_3_WIN }
-};
-
-static u32 pci_snoop_tab[2][4] __initdata = {
-	{ MV64x60_PCI02MEM_SNOOP_0_WIN, MV64x60_PCI02MEM_SNOOP_1_WIN,
-	  MV64x60_PCI02MEM_SNOOP_2_WIN, MV64x60_PCI02MEM_SNOOP_3_WIN },
-	{ MV64x60_PCI12MEM_SNOOP_0_WIN, MV64x60_PCI12MEM_SNOOP_1_WIN,
-	  MV64x60_PCI12MEM_SNOOP_2_WIN, MV64x60_PCI12MEM_SNOOP_3_WIN }
-};
-
-static u32 pci_size_tab[2][4] __initdata = {
-	{ MV64x60_PCI0_MEM_0_SIZE, MV64x60_PCI0_MEM_1_SIZE,
-	  MV64x60_PCI0_MEM_2_SIZE, MV64x60_PCI0_MEM_3_SIZE },
-	{ MV64x60_PCI1_MEM_0_SIZE, MV64x60_PCI1_MEM_1_SIZE,
-	  MV64x60_PCI1_MEM_2_SIZE, MV64x60_PCI1_MEM_3_SIZE }
-};
-
-void __init
-mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh,
-	struct pci_controller *hose, struct mv64x60_pci_info *pi,
-	u32 bus, u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	/*
-	 * Set the access control, snoop, BAR size, and window base addresses.
-	 * PCI->MEM windows base addresses will match exactly what the
-	 * CPU->MEM windows are.
-	 */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_64bit_window(bh,
-				pci_acc_tab[bus][i], 0,
-				mem_windows[i][0], mem_windows[i][1],
-				pi->acc_cntl_options[i]);
-			bh->ci->enable_window_64bit(bh, pci_acc_tab[bus][i]);
-
-			if (bh->ci->window_tab_64bit[
-				pci_snoop_tab[bus][i]].base_lo_reg != 0) {
-
-				mv64x60_set_64bit_window(bh,
-					pci_snoop_tab[bus][i], 0,
-					mem_windows[i][0], mem_windows[i][1],
-					pi->snoop_options[i]);
-				bh->ci->enable_window_64bit(bh,
-					pci_snoop_tab[bus][i]);
-			}
-
-			bh->ci->set_pci2mem_window(hose, bus, i,
-				mem_windows[i][0]);
-			mv64x60_write(bh, pci_size_tab[bus][i],
-				mv64x60_mask(mem_windows[i][1] - 1, 20));
-
-			/* Enable the window */
-			mv64x60_clr_bits(bh, ((bus == 0) ?
-				MV64x60_PCI0_BAR_ENABLE :
-				MV64x60_PCI1_BAR_ENABLE), (1 << i));
-		}
-}
-
-/*
- *****************************************************************************
- *
- *	Hose & Resource Alloc/Init Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_alloc_hoses()
- *
- * Allocate the PCI hose structures for the bridge's PCI buses.
- */
-void __init
-mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr, u32 cfg_data,
-	struct pci_controller **hose)
-{
-	*hose = pcibios_alloc_controller();
-	setup_indirect_pci_nomap(*hose, bh->v_base + cfg_addr,
-		bh->v_base + cfg_data);
-}
-
-/*
- * mv64x60_config_resources()
- *
- * Calculate the offsets, etc. for the hose structures to reflect all of
- * the address remapping that happens as you go from CPU->PCI and PCI->MEM.
- */
-void __init
-mv64x60_config_resources(struct pci_controller *hose,
-	struct mv64x60_pci_info *pi, u32 io_base)
-{
-	int		i;
-	/* 2 hoses; 4 resources/hose; string <= 64 bytes */
-	static char	s[2][4][64];
-
-	if (pi->pci_io.size != 0) {
-		sprintf(s[hose->index][0], "PCI hose %d I/O Space",
-			hose->index);
-		pci_init_resource(&hose->io_resource, io_base - isa_io_base,
-			io_base - isa_io_base + pi->pci_io.size - 1,
-			IORESOURCE_IO, s[hose->index][0]);
-		hose->io_space.start = pi->pci_io.pci_base_lo;
-		hose->io_space.end = pi->pci_io.pci_base_lo + pi->pci_io.size-1;
-		hose->io_base_phys = pi->pci_io.cpu_base;
-		hose->io_base_virt = (void *)isa_io_base;
-	}
-
-	for (i=0; i<3; i++)
-		if (pi->pci_mem[i].size != 0) {
-			sprintf(s[hose->index][i+1], "PCI hose %d MEM Space %d",
-				hose->index, i);
-			pci_init_resource(&hose->mem_resources[i],
-				pi->pci_mem[i].cpu_base,
-				pi->pci_mem[i].cpu_base + pi->pci_mem[i].size-1,
-				IORESOURCE_MEM, s[hose->index][i+1]);
-		}
-
-	hose->mem_space.end = pi->pci_mem[0].pci_base_lo +
-						pi->pci_mem[0].size - 1;
-	hose->pci_mem_offset = pi->pci_mem[0].cpu_base -
-						pi->pci_mem[0].pci_base_lo;
-}
-
-/*
- * mv64x60_config_pci_params()
- *
- * Configure a hose's PCI config space parameters.
- */
-void __init
-mv64x60_config_pci_params(struct pci_controller *hose,
-	struct mv64x60_pci_info *pi)
-{
-	u32	devfn;
-	u16	u16_val;
-	u8	save_exclude;
-
-	devfn = PCI_DEVFN(0,0);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-
-	/* Set class code to indicate host bridge */
-	u16_val = PCI_CLASS_BRIDGE_HOST; /* 0x0600 (host bridge) */
-	early_write_config_word(hose, 0, devfn, PCI_CLASS_DEVICE, u16_val);
-
-	/* Enable bridge to be PCI master & respond to PCI MEM cycles */
-	early_read_config_word(hose, 0, devfn, PCI_COMMAND, &u16_val);
-	u16_val &= ~(PCI_COMMAND_IO | PCI_COMMAND_INVALIDATE |
-		PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK);
-	u16_val |= pi->pci_cmd_bits | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	early_write_config_word(hose, 0, devfn, PCI_COMMAND, u16_val);
-
-	/* Set latency timer, cache line size, clear BIST */
-	u16_val = (pi->latency_timer << 8) | (L1_CACHE_BYTES >> 2);
-	early_write_config_word(hose, 0, devfn, PCI_CACHE_LINE_SIZE, u16_val);
-
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- *****************************************************************************
- *
- *	PCI Related Routine
- *
- *****************************************************************************
- */
-/*
- * mv64x60_set_bus()
- *
- * Set the bus number for the hose directly under the bridge.
- */
-void __init
-mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus)
-{
-	struct pci_controller	*hose;
-	u32	pci_mode, p2p_cfg, pci_cfg_offset, val;
-	u8	save_exclude;
-
-	if (bus == 0) {
-		pci_mode = bh->pci_mode_a;
-		p2p_cfg = MV64x60_PCI0_P2P_CONFIG;
-		pci_cfg_offset = 0x64;
-		hose = bh->hose_a;
-	} else {
-		pci_mode = bh->pci_mode_b;
-		p2p_cfg = MV64x60_PCI1_P2P_CONFIG;
-		pci_cfg_offset = 0xe4;
-		hose = bh->hose_b;
-	}
-
-	child_bus &= 0xff;
-	val = mv64x60_read(bh, p2p_cfg);
-
-	if (pci_mode == MV64x60_PCIMODE_CONVENTIONAL) {
-		val &= 0xe0000000; /* Force dev num to 0, turn off P2P bridge */
-		val |= (child_bus << 16) | 0xff;
-		mv64x60_write(bh, p2p_cfg, val);
-		(void)mv64x60_read(bh, p2p_cfg); /* Flush FIFO */
-	} else { /* PCI-X */
-		/*
-		 * Need to use the current bus/dev number (that's in the
-		 * P2P CONFIG reg) to access the bridge's pci config space.
-		 */
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_write_config_dword(hose, (val & 0x00ff0000) >> 16,
-			PCI_DEVFN(((val & 0x1f000000) >> 24), 0),
-			pci_cfg_offset, child_bus << 8);
-		mv64x60_pci_exclude_bridge = save_exclude;
-	}
-}
-
-/*
- * mv64x60_pci_exclude_device()
- *
- * This routine is used to make the bridge not appear when the
- * PCI subsystem is accessing PCI devices (in PCI config space).
- */
-int
-mv64x60_pci_exclude_device(u8 bus, u8 devfn)
-{
-	struct pci_controller	*hose;
-
-	hose = pci_bus_to_hose(bus);
-
-	/* Skip slot 0 on both hoses */
-	if ((mv64x60_pci_exclude_bridge == 1) && (PCI_SLOT(devfn) == 0) &&
-		(hose->first_busno == bus))
-
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-} /* mv64x60_pci_exclude_device() */
-
-/*
- *****************************************************************************
- *
- *	Platform Device Routines
- *
- *****************************************************************************
- */
-
-/*
- * mv64x60_pd_fixup()
- *
- * Need to add the base addr of where the bridge's regs are mapped in the
- * physical addr space so drivers can ioremap() them.
- */
-void __init
-mv64x60_pd_fixup(struct mv64x60_handle *bh, struct platform_device *pd_devs[],
-	u32 entries)
-{
-	struct resource	*r;
-	u32		i, j;
-
-	for (i=0; i<entries; i++) {
-		j = 0;
-
-		while ((r = platform_get_resource(pd_devs[i],IORESOURCE_MEM,j))
-			!= NULL) {
-
-			r->start += bh->p_base;
-			r->end += bh->p_base;
-			j++;
-		}
-	}
-}
-
-/*
- * mv64x60_add_pds()
- *
- * Add the mv64x60 platform devices to the list of platform devices.
- */
-static int __init
-mv64x60_add_pds(void)
-{
-	return platform_add_devices(mv64x60_pd_devs,
-		ARRAY_SIZE(mv64x60_pd_devs));
-}
-arch_initcall(mv64x60_add_pds);
-
-/*
- *****************************************************************************
- *
- *	GT64260-Specific Routines
- *
- *****************************************************************************
- */
-/*
- * gt64260_translate_size()
- *
- * On the GT64260, the size register is really the "top" address of the window.
- */
-static u32 __init
-gt64260_translate_size(u32 base, u32 size, u32 num_bits)
-{
-	return base + mv64x60_mask(size - 1, num_bits);
-}
-
-/*
- * gt64260_untranslate_size()
- *
- * Translate the top address of a window into a window size.
- */
-static u32 __init
-gt64260_untranslate_size(u32 base, u32 size, u32 num_bits)
-{
-	if (size >= base)
-		size = size - base + (1 << (32 - num_bits));
-	else
-		size = 0;
-
-	return size;
-}
-
-/*
- * gt64260_set_pci2mem_window()
- *
- * The PCI->MEM window registers are actually in PCI config space so need
- * to set them by setting the correct config space BARs.
- */
-static u32 gt64260_reg_addrs[2][4] __initdata = {
-	{ 0x10, 0x14, 0x18, 0x1c }, { 0x90, 0x94, 0x98, 0x9c }
-};
-
-static void __init
-gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
-	u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
-		hose->index, base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0, 0),
-		gt64260_reg_addrs[bus][window], mv64x60_mask(base, 20) | 0x8);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * gt64260_set_pci2regs_window()
- *
- * Set where the bridge's registers appear in PCI MEM space.
- */
-static u32 gt64260_offset[2] __initdata = {0x20, 0xa0};
-
-static void __init
-gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
-		base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0), gt64260_offset[bus],
-		(base << 16));
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * gt64260_is_enabled_32bit()
- *
- * On a GT64260, a window is enabled iff its top address is >= to its base
- * address.
- */
-static u32 __init
-gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	rc = 0;
-
-	if ((gt64260_32bit_windows[window].base_reg != 0) &&
-		(gt64260_32bit_windows[window].size_reg != 0) &&
-		((mv64x60_read(bh, gt64260_32bit_windows[window].size_reg) &
-			((1 << gt64260_32bit_windows[window].size_bits) - 1)) >=
-		 (mv64x60_read(bh, gt64260_32bit_windows[window].base_reg) &
-			((1 << gt64260_32bit_windows[window].base_bits) - 1))))
-
-		rc = 1;
-
-	return rc;
-}
-
-/*
- * gt64260_enable_window_32bit()
- *
- * On the GT64260, a window is enabled iff the top address is >= to the base
- * address of the window.  Since the window has already been configured by
- * the time this routine is called, we have nothing to do here.
- */
-static void __init
-gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 32bit window: %d\n", window);
-}
-
-/*
- * gt64260_disable_window_32bit()
- *
- * On a GT64260, you disable a window by setting its top address to be less
- * than its base address.
- */
-static void __init
-gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, gt64260_32bit_windows[window].base_reg,
-		gt64260_32bit_windows[window].size_reg);
-
-	if ((gt64260_32bit_windows[window].base_reg != 0) &&
-		(gt64260_32bit_windows[window].size_reg != 0)) {
-
-		/* To disable, make bottom reg higher than top reg */
-		mv64x60_write(bh, gt64260_32bit_windows[window].base_reg,0xfff);
-		mv64x60_write(bh, gt64260_32bit_windows[window].size_reg, 0);
-	}
-}
-
-/*
- * gt64260_enable_window_64bit()
- *
- * On the GT64260, a window is enabled iff the top address is >= to the base
- * address of the window.  Since the window has already been configured by
- * the time this routine is called, we have nothing to do here.
- */
-static void __init
-gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 64bit window: %d\n", window);
-}
-
-/*
- * gt64260_disable_window_64bit()
- *
- * On a GT64260, you disable a window by setting its top address to be less
- * than its base address.
- */
-static void __init
-gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, gt64260_64bit_windows[window].base_lo_reg,
-		gt64260_64bit_windows[window].size_reg);
-
-	if ((gt64260_64bit_windows[window].base_lo_reg != 0) &&
-		(gt64260_64bit_windows[window].size_reg != 0)) {
-
-		/* To disable, make bottom reg higher than top reg */
-		mv64x60_write(bh, gt64260_64bit_windows[window].base_lo_reg,
-									0xfff);
-		mv64x60_write(bh, gt64260_64bit_windows[window].base_hi_reg, 0);
-		mv64x60_write(bh, gt64260_64bit_windows[window].size_reg, 0);
-	}
-}
-
-/*
- * gt64260_disable_all_windows()
- *
- * The GT64260 has several windows that aren't represented in the table of
- * windows at the top of this file.  This routine turns all of them off
- * except for the memory controller windows, of course.
- */
-static void __init
-gt64260_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-	u32	i, preserve;
-
-	/* Disable 32bit windows (don't disable cpu->mem windows) */
-	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
-		if (i < 32)
-			preserve = si->window_preserve_mask_32_lo & (1 << i);
-		else
-			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
-
-		if (!preserve)
-			gt64260_disable_window_32bit(bh, i);
-	}
-
-	/* Disable 64bit windows */
-	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
-		if (!(si->window_preserve_mask_64 & (1<<i)))
-			gt64260_disable_window_64bit(bh, i);
-
-	/* Turn off cpu protection windows not in gt64260_32bit_windows[] */
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_4, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_4, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_5, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_5, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_6, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_6, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_7, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_7, 0);
-
-	/* Turn off PCI->MEM access cntl wins not in gt64260_64bit_windows[] */
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_SIZE, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_SIZE, 0);
-
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_SIZE, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_SIZE, 0);
-
-	/* Disable all PCI-><whatever> windows */
-	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x07fffdff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x07fffdff);
-
-	/*
-	 * Some firmwares enable a bunch of intr sources
-	 * for the PCI INT output pins.
-	 */
-	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_0_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_1_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_2_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_3_MASK, 0);
-}
-
-/*
- * gt64260a_chip_specific_init()
- *
- * Implement errata workarounds for the GT64260A.
- */
-static void __init
-gt64260a_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#ifdef CONFIG_SERIAL_MPSC
-	struct resource	*r;
-#endif
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	u32	val;
-	u8	save_exclude;
-#endif
-
-	if (si->pci_0.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	if (si->pci_1.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	/*
-	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
-	 * be set if you are using cache coherency.
-	 */
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
-	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
-		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	if (si->pci_0.enable_bus) {
-		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-
-	if (si->pci_1.enable_bus) {
-		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-	mv64x60_pci_exclude_bridge = save_exclude;
-#endif
-
-	/* Disable buffer/descriptor snooping */
-	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.mirror_regs = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.mirror_regs = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-
-	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
-			!= NULL) {
-		r->start = MV64x60_IRQ_SDMA_0;
-		r->end = MV64x60_IRQ_SDMA_0;
-	}
-#endif
-}
-
-/*
- * gt64260b_chip_specific_init()
- *
- * Implement errata workarounds for the GT64260B.
- */
-static void __init
-gt64260b_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#ifdef CONFIG_SERIAL_MPSC
-	struct resource	*r;
-#endif
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	u32	val;
-	u8	save_exclude;
-#endif
-
-	if (si->pci_0.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	if (si->pci_1.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	/*
-	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
-	 * be set if you are using cache coherency.
-	 */
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH, 0xf);
-
-	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
-	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
-		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	if (si->pci_0.enable_bus) {
-		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-
-	if (si->pci_1.enable_bus) {
-		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-	mv64x60_pci_exclude_bridge = save_exclude;
-#endif
-
-	/* Disable buffer/descriptor snooping */
-	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-
-#ifdef CONFIG_SERIAL_MPSC
-	/*
-	 * The 64260B is not supposed to have the bug where the MPSC & ENET
-	 * can't access cache coherent regions.  However, testing has shown
-	 * that the MPSC, at least, still has this bug.
-	 */
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-
-	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
-			!= NULL) {
-		r->start = MV64x60_IRQ_SDMA_0;
-		r->end = MV64x60_IRQ_SDMA_0;
-	}
-#endif
-}
-
-/*
- *****************************************************************************
- *
- *	MV64360-Specific Routines
- *
- *****************************************************************************
- */
-/*
- * mv64360_translate_size()
- *
- * On the MV64360, the size register is set similar to the size you get
- * from a pci config space BAR register.  That is, programmed from LSB to MSB
- * as a sequence of 1's followed by a sequence of 0's. IOW, "size -1" with the
- * assumption that the size is a power of 2.
- */
-static u32 __init
-mv64360_translate_size(u32 base_addr, u32 size, u32 num_bits)
-{
-	return mv64x60_mask(size - 1, num_bits);
-}
-
-/*
- * mv64360_untranslate_size()
- *
- * Translate the size register value of a window into a window size.
- */
-static u32 __init
-mv64360_untranslate_size(u32 base_addr, u32 size, u32 num_bits)
-{
-	if (size > 0) {
-		size >>= (32 - num_bits);
-		size++;
-		size <<= (32 - num_bits);
-	}
-
-	return size;
-}
-
-/*
- * mv64360_set_pci2mem_window()
- *
- * The PCI->MEM window registers are actually in PCI config space so need
- * to set them by setting the correct config space BARs.
- */
-struct {
-	u32	fcn;
-	u32	base_hi_bar;
-	u32	base_lo_bar;
-} static mv64360_reg_addrs[2][4] __initdata = {
-	{{ 0, 0x14, 0x10 }, { 0, 0x1c, 0x18 },
-	 { 1, 0x14, 0x10 }, { 1, 0x1c, 0x18 }},
-	{{ 0, 0x94, 0x90 }, { 0, 0x9c, 0x98 },
-	 { 1, 0x94, 0x90 }, { 1, 0x9c, 0x98 }}
-};
-
-static void __init
-mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
-	u32 base)
-{
-	u8 save_exclude;
-
-	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
-		hose->index, base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0,
-		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
-		mv64360_reg_addrs[bus][window].base_hi_bar, 0);
-	early_write_config_dword(hose, 0,
-		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
-		mv64360_reg_addrs[bus][window].base_lo_bar,
-		mv64x60_mask(base,20) | 0xc);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * mv64360_set_pci2regs_window()
- *
- * Set where the bridge's registers appear in PCI MEM space.
- */
-static u32 mv64360_offset[2][2] __initdata = {{0x20, 0x24}, {0xa0, 0xa4}};
-
-static void __init
-mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
-		base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-		mv64360_offset[bus][0], (base << 16));
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-		mv64360_offset[bus][1], 0);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * mv64360_is_enabled_32bit()
- *
- * On a MV64360, a window is enabled by either clearing a bit in the
- * CPU BAR Enable reg or setting a bit in the window's base reg.
- * Note that this doesn't work for windows on the PCI slave side but we don't
- * check those so its okay.
- */
-static u32 __init
-mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra, rc = 0;
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			rc = (mv64x60_read(bh, MV64360_CPU_BAR_ENABLE) &
-				(1 << (extra & 0x1f))) == 0;
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			rc = (mv64x60_read(bh,
-				mv64360_32bit_windows[window].base_reg) &
-					(1 << (extra & 0x1f))) != 0;
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			rc = (mv64x60_read(bh, MV64360_ENET2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x7))) == 0;
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			rc = (mv64x60_read(bh, MV64360_MPSC2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x3))) == 0;
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			rc = (mv64x60_read(bh, MV64360_IDMA2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x7))) == 0;
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_is_enabled: %s\n",
-				"32bit table corrupted");
-		}
-	}
-
-	return rc;
-}
-
-/*
- * mv64360_enable_window_32bit()
- *
- * On a MV64360, a window is enabled by either clearing a bit in the
- * CPU BAR Enable reg or setting a bit in the window's base reg.
- */
-static void __init
-mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra;
-
-	pr_debug("enable 32bit window: %d\n", window);
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			mv64x60_clr_bits(bh, MV64360_CPU_BAR_ENABLE,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			mv64x60_set_bits(bh,
-				mv64360_32bit_windows[window].base_reg,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			mv64x60_clr_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			mv64x60_clr_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
-				(1 << (extra & 0x3)));
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			mv64x60_clr_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_enable: %s\n",
-				"32bit table corrupted");
-		}
-	}
-}
-
-/*
- * mv64360_disable_window_32bit()
- *
- * On a MV64360, a window is disabled by either setting a bit in the
- * CPU BAR Enable reg or clearing a bit in the window's base reg.
- */
-static void __init
-mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra;
-
-	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, mv64360_32bit_windows[window].base_reg,
-		mv64360_32bit_windows[window].size_reg);
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			mv64x60_set_bits(bh, MV64360_CPU_BAR_ENABLE,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			mv64x60_clr_bits(bh,
-				mv64360_32bit_windows[window].base_reg,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
-				(1 << (extra & 0x3)));
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_disable: %s\n",
-				"32bit table corrupted");
-		}
-	}
-}
-
-/*
- * mv64360_enable_window_64bit()
- *
- * On the MV64360, a 64-bit window is enabled by setting a bit in the window's
- * base reg.
- */
-static void __init
-mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 64bit window: %d\n", window);
-
-	if ((mv64360_64bit_windows[window].base_lo_reg!= 0) &&
-		(mv64360_64bit_windows[window].size_reg != 0)) {
-
-		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
-				== MV64x60_EXTRA_PCIACC_ENAB)
-			mv64x60_set_bits(bh,
-				mv64360_64bit_windows[window].base_lo_reg,
-				(1 << (mv64360_64bit_windows[window].extra &
-									0x1f)));
-		else
-			printk(KERN_ERR "mv64360_enable: %s\n",
-				"64bit table corrupted");
-	}
-}
-
-/*
- * mv64360_disable_window_64bit()
- *
- * On a MV64360, a 64-bit window is disabled by clearing a bit in the window's
- * base reg.
- */
-static void __init
-mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, mv64360_64bit_windows[window].base_lo_reg,
-		mv64360_64bit_windows[window].size_reg);
-
-	if ((mv64360_64bit_windows[window].base_lo_reg != 0) &&
-			(mv64360_64bit_windows[window].size_reg != 0)) {
-		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
-				== MV64x60_EXTRA_PCIACC_ENAB)
-			mv64x60_clr_bits(bh,
-				mv64360_64bit_windows[window].base_lo_reg,
-				(1 << (mv64360_64bit_windows[window].extra &
-									0x1f)));
-		else
-			printk(KERN_ERR "mv64360_disable: %s\n",
-				"64bit table corrupted");
-	}
-}
-
-/*
- * mv64360_disable_all_windows()
- *
- * The MV64360 has a few windows that aren't represented in the table of
- * windows at the top of this file.  This routine turns all of them off
- * except for the memory controller windows, of course.
- */
-static void __init
-mv64360_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-	u32	preserve, i;
-
-	/* Disable 32bit windows (don't disable cpu->mem windows) */
-	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
-		if (i < 32)
-			preserve = si->window_preserve_mask_32_lo & (1 << i);
-		else
-			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
-
-		if (!preserve)
-			mv64360_disable_window_32bit(bh, i);
-	}
-
-	/* Disable 64bit windows */
-	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
-		if (!(si->window_preserve_mask_64 & (1<<i)))
-			mv64360_disable_window_64bit(bh, i);
-
-	/* Turn off PCI->MEM access cntl wins not in mv64360_64bit_windows[] */
-	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0);
-
-	/* Disable all PCI-><whatever> windows */
-	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x0000f9ff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x0000f9ff);
-}
-
-/*
- * mv64360_config_io2mem_windows()
- *
- * ENET, MPSC, and IDMA ctlrs on the MV64[34]60 have separate windows that
- * must be set up so that the respective ctlr can access system memory.
- */
-static u32 enet_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_ENET2MEM_0_WIN, MV64x60_ENET2MEM_1_WIN,
-	MV64x60_ENET2MEM_2_WIN, MV64x60_ENET2MEM_3_WIN,
-};
-
-static u32 mpsc_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_MPSC2MEM_0_WIN, MV64x60_MPSC2MEM_1_WIN,
-	MV64x60_MPSC2MEM_2_WIN, MV64x60_MPSC2MEM_3_WIN,
-};
-
-static u32 idma_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_IDMA2MEM_0_WIN, MV64x60_IDMA2MEM_1_WIN,
-	MV64x60_IDMA2MEM_2_WIN, MV64x60_IDMA2MEM_3_WIN,
-};
-
-static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] __initdata =
-	{ 0xe, 0xd, 0xb, 0x7 };
-
-static void __init
-mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	pr_debug("config_io2regs_windows: enet, mpsc, idma -> bridge regs\n");
-
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_1, 0);
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_2, 0);
-
-	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_1, 0);
-
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_1, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_2, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_3, 0);
-
-	/* Assume that mem ctlr has no more windows than embedded I/O ctlr */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_32bit_window(bh, enet_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->enet_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, enet_tab[i]);
-
-			/* Give enet r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_2,
-				(0x3 << (i << 1)));
-
-			mv64x60_set_32bit_window(bh, mpsc_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->mpsc_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, mpsc_tab[i]);
-
-			/* Give mpsc r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-
-			mv64x60_set_32bit_window(bh, idma_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->idma_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, idma_tab[i]);
-
-			/* Give idma r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_2,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_3,
-				(0x3 << (i << 1)));
-		}
-}
-
-/*
- * mv64360_set_mpsc2regs_window()
- *
- * MPSC has a window to the bridge's internal registers.  Call this routine
- * to change that window so it doesn't conflict with the windows mapping the
- * mpsc to system memory.
- */
-static void __init
-mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base)
-{
-	pr_debug("set mpsc->internal regs, base: 0x%x\n", base);
-	mv64x60_write(bh, MV64360_MPSC2REGS_BASE, base & 0xffff0000);
-}
-
-/*
- * mv64360_chip_specific_init()
- *
- * Implement errata workarounds for the MV64360.
- */
-static void __init
-mv64360_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24));
-#endif
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.brg_can_tune = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.brg_can_tune = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-#endif
-}
-
-/*
- * mv64460_chip_specific_init()
- *
- * Implement errata workarounds for the MV64460.
- */
-static void __init
-mv64460_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24) | (1<<25));
-	mv64x60_set_bits(bh, MV64460_D_UNIT_MMASK, (1<<1) | (1<<4));
-#endif
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.brg_can_tune = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.brg_can_tune = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-#endif
-}
-
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-/* Export the hotswap register via sysfs for enum event monitoring */
-#define	VAL_LEN_MAX	11 /* 32-bit hex or dec stringified number + '\n' */
-
-static DEFINE_MUTEX(mv64xxx_hs_lock);
-
-static ssize_t
-mv64xxx_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
-	u32	v;
-	u8	save_exclude;
-
-	if (off > 0)
-		return 0;
-	if (count < VAL_LEN_MAX)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-		return -ERESTARTSYS;
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_read_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, &v);
-	mv64x60_pci_exclude_bridge = save_exclude;
-	mutex_unlock(&mv64xxx_hs_lock);
-
-	return sprintf(buf, "0x%08x\n", v);
-}
-
-static ssize_t
-mv64xxx_hs_reg_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
-	u32	v;
-	u8	save_exclude;
-
-	if (off > 0)
-		return 0;
-	if (count <= 0)
-		return -EINVAL;
-
-	if (sscanf(buf, "%i", &v) == 1) {
-		if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-			return -ERESTARTSYS;
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_write_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0),
-				MV64360_PCICFG_CPCI_HOTSWAP, v);
-		mv64x60_pci_exclude_bridge = save_exclude;
-		mutex_unlock(&mv64xxx_hs_lock);
-	}
-	else
-		count = -EINVAL;
-
-	return count;
-}
-
-static struct bin_attribute mv64xxx_hs_reg_attr = { /* Hotswap register */
-	.attr = {
-		.name = "hs_reg",
-		.mode = S_IRUGO | S_IWUSR,
-	},
-	.size  = VAL_LEN_MAX,
-	.read  = mv64xxx_hs_reg_read,
-	.write = mv64xxx_hs_reg_write,
-};
-
-/* Provide sysfs file indicating if this platform supports the hs_reg */
-static ssize_t
-mv64xxx_hs_reg_valid_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct platform_device	*pdev;
-	struct mv64xxx_pdata	*pdp;
-	u32			v;
-
-	pdev = container_of(dev, struct platform_device, dev);
-	pdp = (struct mv64xxx_pdata *)pdev->dev.platform_data;
-
-	if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-		return -ERESTARTSYS;
-	v = pdp->hs_reg_valid;
-	mutex_unlock(&mv64xxx_hs_lock);
-
-	return sprintf(buf, "%i\n", v);
-}
-static DEVICE_ATTR(hs_reg_valid, S_IRUGO, mv64xxx_hs_reg_valid_show, NULL);
-
-static int __init
-mv64xxx_sysfs_init(void)
-{
-	sysfs_create_bin_file(&mv64xxx_device.dev.kobj, &mv64xxx_hs_reg_attr);
-	sysfs_create_file(&mv64xxx_device.dev.kobj,&dev_attr_hs_reg_valid.attr);
-	return 0;
-}
-subsys_initcall(mv64xxx_sysfs_init);
-#endif
diff --git a/arch/ppc/syslib/mv64x60_dbg.c b/arch/ppc/syslib/mv64x60_dbg.c
deleted file mode 100644
index e1876261e5dc..000000000000
--- a/arch/ppc/syslib/mv64x60_dbg.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * KGDB and progress routines for the Marvell/Galileo MV64x60 (Discovery).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- *****************************************************************************
- *
- *	Low-level MPSC/UART I/O routines
- *
- *****************************************************************************
- */
-
-
-#include <linux/irq.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-
-#define	MPSC_CHR_1	0x000c
-#define	MPSC_CHR_2	0x0010
-
-static struct mv64x60_handle	mv64x60_dbg_bh;
-
-void
-mv64x60_progress_init(u32 base)
-{
-	mv64x60_dbg_bh.v_base = base;
-	return;
-}
-
-static void
-mv64x60_polled_putc(int chan, char c)
-{
-	u32	offset;
-
-	if (chan == 0)
-		offset = 0x8000;
-	else
-		offset = 0x9000;
-
-	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_1, (u32)c);
-	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_2, 0x200);
-	udelay(2000);
-}
-
-void
-mv64x60_mpsc_progress(char *s, unsigned short hex)
-{
-	volatile char	c;
-
-	mv64x60_polled_putc(0, '\r');
-
-	while ((c = *s++) != 0)
-		mv64x60_polled_putc(0, c);
-
-	mv64x60_polled_putc(0, '\n');
-	mv64x60_polled_putc(0, '\r');
-
-	return;
-}
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-
-
-#if defined(CONFIG_KGDB)
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#else
-#error "Invalid kgdb_tty port"
-#endif
-
-void
-putDebugChar(unsigned char c)
-{
-	mv64x60_polled_putc(KGDB_PORT, (char)c);
-}
-
-int
-getDebugChar(void)
-{
-	unsigned char	c;
-
-	while (!mv64x60_polled_getc(KGDB_PORT, &c));
-	return (int)c;
-}
-
-void
-putDebugString(char* str)
-{
-	while (*str != '\0') {
-		putDebugChar(*str);
-		str++;
-	}
-	putDebugChar('\r');
-	return;
-}
-
-void
-kgdb_interruptible(int enable)
-{
-}
-
-void
-kgdb_map_scc(void)
-{
-	if (ppc_md.early_serial_map)
-		ppc_md.early_serial_map();
-}
-#endif	/* CONFIG_KGDB */
diff --git a/arch/ppc/syslib/mv64x60_win.c b/arch/ppc/syslib/mv64x60_win.c
deleted file mode 100644
index 4bf1ad17bf1a..000000000000
--- a/arch/ppc/syslib/mv64x60_win.c
+++ /dev/null
@@ -1,1165 +0,0 @@
-/*
- * Tables with info on how to manipulate the 32 & 64 bit windows on the
- * various types of Marvell bridge chips.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/mv643xx.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-
-
-/*
- *****************************************************************************
- *
- *	Tables describing how to set up windows on each type of bridge
- *
- *****************************************************************************
- */
-struct mv64x60_32bit_window
-	gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
-	/* CPU->MEM Windows */
-	[MV64x60_CPU2MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->Device Windows */
-	[MV64x60_CPU2DEV_0_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_0_BASE,
-		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_1_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_1_BASE,
-		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_2_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_2_BASE,
-		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_3_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_3_BASE,
-		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->Boot Window */
-	[MV64x60_CPU2BOOT_WIN] = {
-		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
-		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 0 Windows */
-	[MV64x60_CPU2PCI0_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Windows */
-	[MV64x60_CPU2PCI1_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->SRAM Window (64260 has no integrated SRAM) */
-	/* CPU->PCI 0 Remap I/O Window */
-	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Remap I/O Window */
-	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Memory Protection Windows */
-	[MV64x60_CPU_PROT_0_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_0,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_1_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_1,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_2_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_2,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_3_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_3,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Snoop Windows */
-	[MV64x60_CPU_SNOOP_0_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_0,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_0,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_1_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_1,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_1,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_2_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_2,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_2,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_3_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_3,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_3,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->System Memory Remap Windows */
-	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* PCI 1->System Memory Remap Windows */
-	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* ENET->SRAM Window (64260 doesn't have separate windows) */
-	/* MPSC->SRAM Window (64260 doesn't have separate windows) */
-	/* IDMA->SRAM Window (64260 doesn't have separate windows) */
-};
-
-struct mv64x60_64bit_window
-	gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
-	/* CPU->PCI 0 MEM Remap Windows */
-	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 MEM Remap Windows */
-	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Access Control Windows */
-	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 1->MEM Access Control Windows */
-	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Snoop Windows */
-	[MV64x60_PCI02MEM_SNOOP_0_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_0_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_0_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_1_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_1_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_1_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_2_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_2_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_2_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_3_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_3_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_3_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 1->MEM Snoop Windows */
-	[MV64x60_PCI12MEM_SNOOP_0_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_0_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_0_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_1_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_1_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_1_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_2_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_2_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_2_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_3_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_3_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_3_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-};
-
-struct mv64x60_32bit_window
-	mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
-	/* CPU->MEM Windows */
-	[MV64x60_CPU2MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 0 },
-	[MV64x60_CPU2MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 1 },
-	[MV64x60_CPU2MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 2 },
-	[MV64x60_CPU2MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 3 },
-	/* CPU->Device Windows */
-	[MV64x60_CPU2DEV_0_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_0_BASE,
-		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 4 },
-	[MV64x60_CPU2DEV_1_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_1_BASE,
-		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 5 },
-	[MV64x60_CPU2DEV_2_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_2_BASE,
-		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 6 },
-	[MV64x60_CPU2DEV_3_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_3_BASE,
-		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 7 },
-	/* CPU->Boot Window */
-	[MV64x60_CPU2BOOT_WIN] = {
-		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
-		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 8 },
-	/* CPU->PCI 0 Windows */
-	[MV64x60_CPU2PCI0_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 9 },
-	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 10 },
-	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 11 },
-	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 12 },
-	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 13 },
-	/* CPU->PCI 1 Windows */
-	[MV64x60_CPU2PCI1_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 14 },
-	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 15 },
-	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 16 },
-	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 17 },
-	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 18 },
-	/* CPU->SRAM Window */
-	[MV64x60_CPU2SRAM_WIN] = {
-		.base_reg		= MV64360_CPU2SRAM_BASE,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 19 },
-	/* CPU->PCI 0 Remap I/O Window */
-	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Remap I/O Window */
-	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Memory Protection Windows */
-	[MV64x60_CPU_PROT_0_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_0,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_1_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_1,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_2_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_2,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_3_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_3,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	/* CPU Snoop Windows -- don't exist on 64360 */
-	/* PCI 0->System Memory Remap Windows */
-	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* PCI 1->System Memory Remap Windows */
-	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* ENET->System Memory Windows */
-	[MV64x60_ENET2MEM_0_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_0_BASE,
-		.size_reg		= MV64360_ENET2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 0 },
-	[MV64x60_ENET2MEM_1_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_1_BASE,
-		.size_reg		= MV64360_ENET2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 1 },
-	[MV64x60_ENET2MEM_2_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_2_BASE,
-		.size_reg		= MV64360_ENET2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 2 },
-	[MV64x60_ENET2MEM_3_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_3_BASE,
-		.size_reg		= MV64360_ENET2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 3 },
-	[MV64x60_ENET2MEM_4_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_4_BASE,
-		.size_reg		= MV64360_ENET2MEM_4_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 4 },
-	[MV64x60_ENET2MEM_5_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_5_BASE,
-		.size_reg		= MV64360_ENET2MEM_5_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 5 },
-	/* MPSC->System Memory Windows */
-	[MV64x60_MPSC2MEM_0_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_0_BASE,
-		.size_reg		= MV64360_MPSC2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 0 },
-	[MV64x60_MPSC2MEM_1_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_1_BASE,
-		.size_reg		= MV64360_MPSC2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 1 },
-	[MV64x60_MPSC2MEM_2_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_2_BASE,
-		.size_reg		= MV64360_MPSC2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 2 },
-	[MV64x60_MPSC2MEM_3_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_3_BASE,
-		.size_reg		= MV64360_MPSC2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 3 },
-	/* IDMA->System Memory Windows */
-	[MV64x60_IDMA2MEM_0_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_0_BASE,
-		.size_reg		= MV64360_IDMA2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 0 },
-	[MV64x60_IDMA2MEM_1_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_1_BASE,
-		.size_reg		= MV64360_IDMA2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 1 },
-	[MV64x60_IDMA2MEM_2_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_2_BASE,
-		.size_reg		= MV64360_IDMA2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 2 },
-	[MV64x60_IDMA2MEM_3_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_3_BASE,
-		.size_reg		= MV64360_IDMA2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 3 },
-	[MV64x60_IDMA2MEM_4_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_4_BASE,
-		.size_reg		= MV64360_IDMA2MEM_4_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 4 },
-	[MV64x60_IDMA2MEM_5_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_5_BASE,
-		.size_reg		= MV64360_IDMA2MEM_5_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 5 },
-	[MV64x60_IDMA2MEM_6_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_6_BASE,
-		.size_reg		= MV64360_IDMA2MEM_6_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 6 },
-	[MV64x60_IDMA2MEM_7_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_7_BASE,
-		.size_reg		= MV64360_IDMA2MEM_7_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 7 },
-};
-
-struct mv64x60_64bit_window
-	mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
-	/* CPU->PCI 0 MEM Remap Windows */
-	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 MEM Remap Windows */
-	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Access Control Windows */
-	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	/* PCI 1->MEM Access Control Windows */
-	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	/* PCI 0->MEM Snoop Windows -- don't exist on 64360 */
-	/* PCI 1->MEM Snoop Windows -- don't exist on 64360 */
-};
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
deleted file mode 100644
index a6fb7dcfa738..000000000000
--- a/arch/ppc/syslib/ocp.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * ocp.c
- *
- *      (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *          Mipsys - France
- *
- *          Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- *          Additional support and port to 2.6 LDM/sysfs by
- *          Matt Porter <mporter@kernel.crashing.org>
- *          Copyright 2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  OCP (On Chip Peripheral) is a software emulated "bus" with a
- *  pseudo discovery method for dumb peripherals. Usually these type
- *  of peripherals are found on embedded SoC (System On a Chip)
- *  processors or highly integrated system controllers that have
- *  a host bridge and many peripherals.  Common examples where
- *  this is already used include the PPC4xx, MPC52xx,
- *  and MV64xxx parts.
- *
- *  This subsystem creates a standard OCP bus type within the
- *  device model.  The devices on the OCP bus are seeded by an
- *  an initial OCP device array created by the arch-specific
- *  Device entries can be added/removed/modified through OCP
- *  helper functions to accommodate system and  board-specific
- *  parameters commonly found in embedded systems. OCP also
- *  provides a standard method for devices to describe extended
- *  attributes about themselves to the system.  A standard access
- *  method allows OCP drivers to obtain the information, both
- *  SoC-specific and system/board-specific, needed for operation.
- */
-
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/bootmem.h>
-#include <linux/device.h>
-#include <linux/rwsem.h>
-
-#include <asm/io.h>
-#include <asm/ocp.h>
-#include <asm/errno.h>
-
-//#define DBG(x)	printk x
-#define DBG(x)
-
-extern int mem_init_done;
-
-extern struct ocp_def core_ocp[];	/* Static list of devices, provided by
-					   CPU core */
-
-LIST_HEAD(ocp_devices);			/* List of all OCP devices */
-DECLARE_RWSEM(ocp_devices_sem);		/* Global semaphores for those lists */
-
-static int ocp_inited;
-
-/* Sysfs support */
-#define OCP_DEF_ATTR(field, format_string)				\
-static ssize_t								\
-show_##field(struct device *dev, struct device_attribute *attr, char *buf)				\
-{									\
-	struct ocp_device *odev = to_ocp_dev(dev);			\
-									\
-	return sprintf(buf, format_string, odev->def->field);		\
-}									\
-static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
-
-OCP_DEF_ATTR(vendor, "0x%04x\n");
-OCP_DEF_ATTR(function, "0x%04x\n");
-OCP_DEF_ATTR(index, "0x%04x\n");
-#ifdef CONFIG_PTE_64BIT
-OCP_DEF_ATTR(paddr, "0x%016Lx\n");
-#else
-OCP_DEF_ATTR(paddr, "0x%08lx\n");
-#endif
-OCP_DEF_ATTR(irq, "%d\n");
-OCP_DEF_ATTR(pm, "%lu\n");
-
-void ocp_create_sysfs_dev_files(struct ocp_device *odev)
-{
-	struct device *dev = &odev->dev;
-
-	/* Current OCP device def attributes */
-	device_create_file(dev, &dev_attr_vendor);
-	device_create_file(dev, &dev_attr_function);
-	device_create_file(dev, &dev_attr_index);
-	device_create_file(dev, &dev_attr_paddr);
-	device_create_file(dev, &dev_attr_irq);
-	device_create_file(dev, &dev_attr_pm);
-	/* Current OCP device additions attributes */
-	if (odev->def->additions && odev->def->show)
-		odev->def->show(dev);
-}
-
-/**
- *	ocp_device_match	-	Match one driver to one device
- *	@drv: driver to match
- *	@dev: device to match
- *
- *	This function returns 0 if the driver and device don't match
- */
-static int
-ocp_device_match(struct device *dev, struct device_driver *drv)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(drv);
-	const struct ocp_device_id *ids = ocp_drv->id_table;
-
-	if (!ids)
-		return 0;
-
-	while (ids->vendor || ids->function) {
-		if ((ids->vendor == OCP_ANY_ID
-		     || ids->vendor == ocp_dev->def->vendor)
-		    && (ids->function == OCP_ANY_ID
-			|| ids->function == ocp_dev->def->function))
-		        return 1;
-		ids++;
-	}
-	return 0;
-}
-
-static int
-ocp_device_probe(struct device *dev)
-{
-	int error = 0;
-	struct ocp_driver *drv;
-	struct ocp_device *ocp_dev;
-
-	drv = to_ocp_drv(dev->driver);
-	ocp_dev = to_ocp_dev(dev);
-
-	if (drv->probe) {
-		error = drv->probe(ocp_dev);
-		if (error >= 0) {
-			ocp_dev->driver = drv;
-			error = 0;
-		}
-	}
-	return error;
-}
-
-static int
-ocp_device_remove(struct device *dev)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-
-	if (ocp_dev->driver) {
-		if (ocp_dev->driver->remove)
-			ocp_dev->driver->remove(ocp_dev);
-		ocp_dev->driver = NULL;
-	}
-	return 0;
-}
-
-static int
-ocp_device_suspend(struct device *dev, pm_message_t state)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
-
-	if (dev->driver && ocp_drv->suspend)
-		return ocp_drv->suspend(ocp_dev, state);
-	return 0;
-}
-
-static int
-ocp_device_resume(struct device *dev)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
-
-	if (dev->driver && ocp_drv->resume)
-		return ocp_drv->resume(ocp_dev);
-	return 0;
-}
-
-struct bus_type ocp_bus_type = {
-	.name = "ocp",
-	.match = ocp_device_match,
-	.probe = ocp_device_probe,
-	.remove = ocp_device_remove,
-	.suspend = ocp_device_suspend,
-	.resume = ocp_device_resume,
-};
-
-/**
- *	ocp_register_driver	-	Register an OCP driver
- *	@drv: pointer to statically defined ocp_driver structure
- *
- *	The driver's probe() callback is called either recursively
- *	by this function or upon later call of ocp_driver_init
- *
- *	NOTE: Detection of devices is a 2 pass step on this implementation,
- *	hotswap isn't supported. First, all OCP devices are put in the device
- *	list, _then_ all drivers are probed on each match.
- */
-int
-ocp_register_driver(struct ocp_driver *drv)
-{
-	/* initialize common driver fields */
-	drv->driver.name = drv->name;
-	drv->driver.bus = &ocp_bus_type;
-
-	/* register with core */
-	return driver_register(&drv->driver);
-}
-
-/**
- *	ocp_unregister_driver	-	Unregister an OCP driver
- *	@drv: pointer to statically defined ocp_driver structure
- *
- *	The driver's remove() callback is called recursively
- *	by this function for any device already registered
- */
-void
-ocp_unregister_driver(struct ocp_driver *drv)
-{
-	DBG(("ocp: ocp_unregister_driver(%s)...\n", drv->name));
-
-	driver_unregister(&drv->driver);
-
-	DBG(("ocp: ocp_unregister_driver(%s)... done.\n", drv->name));
-}
-
-/* Core of ocp_find_device(). Caller must hold ocp_devices_sem */
-static struct ocp_device *
-__ocp_find_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct list_head	*entry;
-	struct ocp_device	*dev, *found = NULL;
-
-	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
-
-	list_for_each(entry, &ocp_devices) {
-		dev = list_entry(entry, struct ocp_device, link);
-		if (vendor != OCP_ANY_ID && vendor != dev->def->vendor)
-			continue;
-		if (function != OCP_ANY_ID && function != dev->def->function)
-			continue;
-		if (index != OCP_ANY_INDEX && index != dev->def->index)
-			continue;
-		found = dev;
-		break;
-	}
-
-	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)... done\n", vendor, function, index));
-
-	return found;
-}
-
-/**
- *	ocp_find_device	-	Find a device by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows a lookup of a given function by it's
- *	index, it's typically used to find the MAL or ZMII associated
- *	with an EMAC or similar horrors.
- *      You can pass vendor, though you usually want OCP_ANY_ID there...
- */
-struct ocp_device *
-ocp_find_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device	*dev;
-
-	down_read(&ocp_devices_sem);
-	dev = __ocp_find_device(vendor, function, index);
-	up_read(&ocp_devices_sem);
-
-	return dev;
-}
-
-/**
- *	ocp_get_one_device -	Find a def by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows a lookup of a given ocp_def by it's
- *	vendor, function, and index.  The main purpose for is to
- *	allow modification of the def before binding to the driver
- */
-struct ocp_def *
-ocp_get_one_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device	*dev;
-	struct ocp_def		*found = NULL;
-
-	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)...\n",
-		vendor, function, index));
-
-	dev = ocp_find_device(vendor, function, index);
-
-	if (dev)
-		found = dev->def;
-
-	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)... done.\n",
-		vendor, function, index));
-
-	return found;
-}
-
-/**
- *	ocp_add_one_device	-	Add a device
- *	@def: static device definition structure
- *
- *	This function adds a device definition to the
- *	device list. It may only be called before
- *	ocp_driver_init() and will return an error
- *	otherwise.
- */
-int
-ocp_add_one_device(struct ocp_def *def)
-{
-	struct	ocp_device	*dev;
-
-	DBG(("ocp: ocp_add_one_device()...\n"));
-
-	/* Can't be called after ocp driver init */
-	if (ocp_inited)
-		return 1;
-
-	if (mem_init_done)
-		dev = kmalloc(sizeof(*dev), GFP_KERNEL);
-	else
-		dev = alloc_bootmem(sizeof(*dev));
-
-	if (dev == NULL)
-		return 1;
-	memset(dev, 0, sizeof(*dev));
-	dev->def = def;
-	dev->current_state = 4;
-	sprintf(dev->name, "OCP device %04x:%04x:%04x",
-		dev->def->vendor, dev->def->function, dev->def->index);
-	down_write(&ocp_devices_sem);
-	list_add_tail(&dev->link, &ocp_devices);
-	up_write(&ocp_devices_sem);
-
-	DBG(("ocp: ocp_add_one_device()...done\n"));
-
-	return 0;
-}
-
-/**
- *	ocp_remove_one_device -	Remove a device by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows removal of a given function by its
- *	index. It may only be called before ocp_driver_init()
- *	and will return an error otherwise.
- */
-int
-ocp_remove_one_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device *dev;
-
-	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
-
-	/* Can't be called after ocp driver init */
-	if (ocp_inited)
-		return 1;
-
-	down_write(&ocp_devices_sem);
-	dev = __ocp_find_device(vendor, function, index);
-	list_del(&dev->link);
-	up_write(&ocp_devices_sem);
-
-	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index));
-
-	return 0;
-}
-
-/**
- *	ocp_for_each_device	-	Iterate over OCP devices
- *	@callback: routine to execute for each ocp device.
- *	@arg: user data to be passed to callback routine.
- *
- *	This routine holds the ocp_device semaphore, so the
- *	callback routine cannot modify the ocp_device list.
- */
-void
-ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg)
-{
-	struct list_head *entry;
-
-	if (callback) {
-		down_read(&ocp_devices_sem);
-		list_for_each(entry, &ocp_devices)
-			callback(list_entry(entry, struct ocp_device, link),
-				arg);
-		up_read(&ocp_devices_sem);
-	}
-}
-
-/**
- *	ocp_early_init	-	Init OCP device management
- *
- *	This function builds the list of devices before setup_arch.
- *	This allows platform code to modify the device lists before
- *	they are bound to drivers (changes to paddr, removing devices
- *	etc)
- */
-int __init
-ocp_early_init(void)
-{
-	struct ocp_def	*def;
-
-	DBG(("ocp: ocp_early_init()...\n"));
-
-	/* Fill the devices list */
-	for (def = core_ocp; def->vendor != OCP_VENDOR_INVALID; def++)
-		ocp_add_one_device(def);
-
-	DBG(("ocp: ocp_early_init()... done.\n"));
-
-	return 0;
-}
-
-/**
- *	ocp_driver_init	-	Init OCP device management
- *
- *	This function is meant to be called via OCP bus registration.
- */
-static int __init
-ocp_driver_init(void)
-{
-	int ret = 0, index = 0;
-	struct device *ocp_bus;
-	struct list_head *entry;
-	struct ocp_device *dev;
-
-	if (ocp_inited)
-		return ret;
-	ocp_inited = 1;
-
-	DBG(("ocp: ocp_driver_init()...\n"));
-
-	/* Allocate/register primary OCP bus */
-	ocp_bus = kzalloc(sizeof(struct device), GFP_KERNEL);
-	if (ocp_bus == NULL)
-		return 1;
-	strcpy(ocp_bus->bus_id, "ocp");
-
-	bus_register(&ocp_bus_type);
-
-	device_register(ocp_bus);
-
-	/* Put each OCP device into global device list */
-	list_for_each(entry, &ocp_devices) {
-		dev = list_entry(entry, struct ocp_device, link);
-		sprintf(dev->dev.bus_id, "%2.2x", index);
-		dev->dev.parent = ocp_bus;
-		dev->dev.bus = &ocp_bus_type;
-		device_register(&dev->dev);
-		ocp_create_sysfs_dev_files(dev);
-		index++;
-	}
-
-	DBG(("ocp: ocp_driver_init()... done.\n"));
-
-	return 0;
-}
-
-postcore_initcall(ocp_driver_init);
-
-EXPORT_SYMBOL(ocp_bus_type);
-EXPORT_SYMBOL(ocp_find_device);
-EXPORT_SYMBOL(ocp_register_driver);
-EXPORT_SYMBOL(ocp_unregister_driver);
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
deleted file mode 100644
index 67dffe27b5c3..000000000000
--- a/arch/ppc/syslib/open_pic.c
+++ /dev/null
@@ -1,1087 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/machdep.h>
-
-#include "open_pic_defs.h"
-
-#if defined(CONFIG_PRPMC800)
-#define OPENPIC_BIG_ENDIAN
-#endif
-
-void __iomem *OpenPIC_Addr;
-static volatile struct OpenPIC __iomem *OpenPIC = NULL;
-
-/*
- * We define OpenPIC_InitSenses table thusly:
- * bit 0x1: sense, 0 for edge and 1 for level.
- * bit 0x2: polarity, 0 for negative, 1 for positive.
- */
-u_int OpenPIC_NumInitSenses __initdata = 0;
-u_char *OpenPIC_InitSenses __initdata = NULL;
-extern int use_of_interrupt_tree;
-
-static u_int NumProcessors;
-static u_int NumSources;
-static int open_pic_irq_offset;
-static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
-static int openpic_cascade_irq = -1;
-static int (*openpic_cascade_fn)(void);
-
-/* Global Operations */
-static void openpic_disable_8259_pass_through(void);
-static void openpic_set_spurious(u_int vector);
-
-#ifdef CONFIG_SMP
-/* Interprocessor Interrupts */
-static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id);
-#endif
-
-/* Timer Interrupts */
-static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
-static void openpic_maptimer(u_int timer, cpumask_t cpumask);
-
-/* Interrupt Sources */
-static void openpic_enable_irq(u_int irq);
-static void openpic_disable_irq(u_int irq);
-static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
-			    int is_level);
-static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
-
-/*
- * These functions are not used but the code is kept here
- * for completeness and future reference.
- */
-#ifdef notused
-static void openpic_enable_8259_pass_through(void);
-static u_int openpic_get_spurious(void);
-static void openpic_set_sense(u_int irq, int sense);
-#endif /* notused */
-
-/*
- * Description of the openpic for the higher-level irq code
- */
-static void openpic_end_irq(unsigned int irq_nr);
-static void openpic_ack_irq(unsigned int irq_nr);
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
-
-struct hw_interrupt_type open_pic = {
-	.typename	= " OpenPIC  ",
-	.enable		= openpic_enable_irq,
-	.disable	= openpic_disable_irq,
-	.ack		= openpic_ack_irq,
-	.end		= openpic_end_irq,
-	.set_affinity	= openpic_set_affinity,
-};
-
-#ifdef CONFIG_SMP
-static void openpic_end_ipi(unsigned int irq_nr);
-static void openpic_ack_ipi(unsigned int irq_nr);
-static void openpic_enable_ipi(unsigned int irq_nr);
-static void openpic_disable_ipi(unsigned int irq_nr);
-
-struct hw_interrupt_type open_pic_ipi = {
-	.typename	= " OpenPIC  ",
-	.enable		= openpic_enable_ipi,
-	.disable	= openpic_disable_ipi,
-	.ack		= openpic_ack_ipi,
-	.end		= openpic_end_ipi,
-};
-#endif /* CONFIG_SMP */
-
-/*
- *  Accesses to the current processor's openpic registers
- */
-#ifdef CONFIG_SMP
-#define THIS_CPU		Processor[cpu]
-#define DECL_THIS_CPU		int cpu = smp_hw_index[smp_processor_id()]
-#define CHECK_THIS_CPU		check_arg_cpu(cpu)
-#else
-#define THIS_CPU		Processor[0]
-#define DECL_THIS_CPU
-#define CHECK_THIS_CPU
-#endif /* CONFIG_SMP */
-
-#if 1
-#define check_arg_ipi(ipi) \
-    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
-#define check_arg_timer(timer) \
-    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
-#define check_arg_vec(vec) \
-    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
-#define check_arg_pri(pri) \
-    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
-/*
- * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
- * data has probably been corrupted and we're going to panic or deadlock later
- * anyway --Troy
- */
-#define check_arg_irq(irq) \
-    if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
-	|| ISR[irq - open_pic_irq_offset] == 0) { \
-      printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
-      dump_stack(); }
-#define check_arg_cpu(cpu) \
-    if (cpu < 0 || cpu >= NumProcessors){ \
-	printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
-	dump_stack(); }
-#else
-#define check_arg_ipi(ipi)	do {} while (0)
-#define check_arg_timer(timer)	do {} while (0)
-#define check_arg_vec(vec)	do {} while (0)
-#define check_arg_pri(pri)	do {} while (0)
-#define check_arg_irq(irq)	do {} while (0)
-#define check_arg_cpu(cpu)	do {} while (0)
-#endif
-
-u_int openpic_read(volatile u_int __iomem *addr)
-{
-	u_int val;
-
-#ifdef OPENPIC_BIG_ENDIAN
-	val = in_be32(addr);
-#else
-	val = in_le32(addr);
-#endif
-	return val;
-}
-
-static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
-{
-#ifdef OPENPIC_BIG_ENDIAN
-	out_be32(addr, val);
-#else
-	out_le32(addr, val);
-#endif
-}
-
-static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
-{
-	u_int val = openpic_read(addr);
-	return val & mask;
-}
-
-inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
-			       u_int field)
-{
-	u_int val = openpic_read(addr);
-	openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
-{
-	openpic_writefield(addr, mask, 0);
-}
-
-static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
-{
-	openpic_writefield(addr, mask, mask);
-}
-
-static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
-				    u_int field)
-{
-	openpic_setfield(addr, OPENPIC_MASK);
-	while (openpic_read(addr) & OPENPIC_ACTIVITY);
-	openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-
-#ifdef CONFIG_SMP
-/* yes this is right ... bug, feature, you decide! -- tgall */
-u_int openpic_read_IPI(volatile u_int __iomem * addr)
-{
-         u_int val = 0;
-#if defined(OPENPIC_BIG_ENDIAN)
-        val = in_be32(addr);
-#else
-        val = in_le32(addr);
-#endif
-        return val;
-}
-
-/* because of the power3 be / le above, this is needed */
-inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
-{
-        u_int  val = openpic_read_IPI(addr);
-        openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
-        openpic_writefield_IPI(addr, mask, 0);
-}
-
-static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
-        openpic_writefield_IPI(addr, mask, mask);
-}
-
-static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
-{
-        openpic_setfield_IPI(addr, OPENPIC_MASK);
-
-        /* wait until it's not in use */
-        /* BenH: Is this code really enough ? I would rather check the result
-         *       and eventually retry ...
-         */
-        while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
-
-        openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
-/* On platforms that may use EPIC serial mode, the default is enabled. */
-int epic_serial_mode = 1;
-
-static void __init openpic_eicr_set_clk(u_int clkval)
-{
-	openpic_writefield(&OpenPIC->Global.Global_Configuration1,
-			OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
-}
-
-static void __init openpic_enable_sie(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration1,
-			OPENPIC_EICR_SIE);
-}
-#endif
-
-#if defined(CONFIG_EPIC_SERIAL_MODE)
-static void openpic_reset(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_RESET);
-	while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
-				 OPENPIC_CONFIG_RESET))
-		mb();
-}
-#endif
-
-void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
-{
-	volatile OpenPIC_Source __iomem *src = first_ISR;
-	int i, last_irq;
-
-	last_irq = first_irq + num_irqs;
-	if (last_irq > NumSources)
-		NumSources = last_irq;
-	if (src == 0)
-		src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
-	for (i = first_irq; i < last_irq; ++i, ++src)
-		ISR[i] = src;
-}
-
-/*
- * The `offset' parameter defines where the interrupts handled by the
- * OpenPIC start in the space of interrupt numbers that the kernel knows
- * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
- * kernel's interrupt numbering scheme.
- * We assume there is only one OpenPIC.
- */
-void __init openpic_init(int offset)
-{
-	u_int t, i;
-	u_int timerfreq;
-	const char *version;
-
-	if (!OpenPIC_Addr) {
-		printk("No OpenPIC found !\n");
-		return;
-	}
-	OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
-	/* Have to start from ground zero.
-	*/
-	openpic_reset();
-#endif
-
-	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
-
-	t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
-	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
-	case 1:
-		version = "1.0";
-		break;
-	case 2:
-		version = "1.2";
-		break;
-	case 3:
-		version = "1.3";
-		break;
-	default:
-		version = "?";
-		break;
-	}
-	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
-			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
-	if (NumSources == 0)
-		openpic_set_sources(0,
-				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
-				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
-				    NULL);
-	printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
-	       version, NumProcessors, NumSources, OpenPIC);
-	timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
-	if (timerfreq)
-		printk("OpenPIC timer frequency is %d.%06d MHz\n",
-		       timerfreq / 1000000, timerfreq % 1000000);
-
-	open_pic_irq_offset = offset;
-
-	/* Initialize timer interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
-	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
-		/* Disabled, Priority 0 */
-		openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
-		/* No processor */
-		openpic_maptimer(i, CPU_MASK_NONE);
-	}
-
-#ifdef CONFIG_SMP
-	/* Initialize IPI interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
-	for (i = 0; i < OPENPIC_NUM_IPI; i++) {
-		/* Disabled, increased priorities 10..13 */
-		openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
-				OPENPIC_VEC_IPI+i+offset);
-		/* IPIs are per-CPU */
-		irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
-		irq_desc[OPENPIC_VEC_IPI+i+offset].chip = &open_pic_ipi;
-	}
-#endif
-
-	/* Initialize external interrupts */
-	if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
-
-	openpic_set_priority(0xf);
-
-	/* Init all external sources, including possibly the cascade. */
-	for (i = 0; i < NumSources; i++) {
-		int sense;
-
-		if (ISR[i] == 0)
-			continue;
-
-		/* the bootloader may have left it enabled (bad !) */
-		openpic_disable_irq(i+offset);
-
-		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
-				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
-		if (sense & IRQ_SENSE_MASK)
-			irq_desc[i+offset].status = IRQ_LEVEL;
-
-		/* Enabled, Default priority */
-		openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
-				(sense & IRQ_POLARITY_MASK),
-				(sense & IRQ_SENSE_MASK));
-		/* Processor 0 */
-		openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
-	}
-
-	/* Init descriptors */
-	for (i = offset; i < NumSources + offset; i++)
-		irq_desc[i].chip = &open_pic;
-
-	/* Initialize the spurious interrupt */
-	if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
-	openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
-	openpic_disable_8259_pass_through();
-#ifdef CONFIG_EPIC_SERIAL_MODE
-	if (epic_serial_mode) {
-		openpic_eicr_set_clk(7);	/* Slowest value until we know better */
-		openpic_enable_sie();
-	}
-#endif
-	openpic_set_priority(0);
-
-	if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
-}
-
-#ifdef notused
-static void openpic_enable_8259_pass_through(void)
-{
-	openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
-			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-#endif /* notused */
-
-static void openpic_disable_8259_pass_through(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-
-/*
- *  Find out the current interrupt
- */
-u_int openpic_irq(void)
-{
-	u_int vec;
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
-				OPENPIC_VECTOR_MASK);
-	return vec;
-}
-
-void openpic_eoi(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
-	/* Handle PCI write posting */
-	(void)openpic_read(&OpenPIC->THIS_CPU.EOI);
-}
-
-u_int openpic_get_priority(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
-				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
-}
-
-void openpic_set_priority(u_int pri)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_pri(pri);
-	openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
-			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
-}
-
-/*
- *  Get/set the spurious vector
- */
-#ifdef notused
-static u_int openpic_get_spurious(void)
-{
-	return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
-				 OPENPIC_VECTOR_MASK);
-}
-#endif /* notused */
-
-static void openpic_set_spurious(u_int vec)
-{
-	check_arg_vec(vec);
-	openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
-			   vec);
-}
-
-#ifdef CONFIG_SMP
-/*
- * Convert a cpu mask from logical to physical cpu numbers.
- */
-static inline cpumask_t physmask(cpumask_t cpumask)
-{
-	int i;
-	cpumask_t mask = CPU_MASK_NONE;
-
-	cpus_and(cpumask, cpu_online_map, cpumask);
-
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_isset(i, cpumask))
-			cpu_set(smp_hw_index[i], mask);
-
-	return mask;
-}
-#else
-#define physmask(cpumask)	(cpumask)
-#endif
-
-void openpic_reset_processor_phys(u_int mask)
-{
-	openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
-}
-
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
-static DEFINE_SPINLOCK(openpic_setup_lock);
-#endif
-
-#ifdef CONFIG_SMP
-/*
- *  Initialize an interprocessor interrupt (and disable it)
- *
- *  ipi: OpenPIC interprocessor interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
-{
-	check_arg_ipi(ipi);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Send an IPI to one or more CPUs
- *
- *  Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
- *  and not a system-wide interrupt number
- */
-void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_ipi(ipi);
-	openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
-		      cpus_addr(physmask(cpumask))[0]);
-}
-
-void openpic_request_IPIs(void)
-{
-	int i;
-
-	/*
-	 * Make sure this matches what is defined in smp.c for
-	 * smp_message_{pass|recv}() or what shows up in
-	 * /proc/interrupts will be wrong!!! --Troy */
-
-	if (OpenPIC == NULL)
-		return;
-
-	/*
- 	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
-	 */
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI0 (call function)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI1 (reschedule)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI2 (invalidate tlb)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI3 (xmon break)", NULL);
-
-	for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
-		openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
-}
-
-/*
- * Do per-cpu setup for SMP systems.
- *
- * Get IPI's working and start taking interrupts.
- *   -- Cort
- */
-
-void __devinit do_openpic_setup_cpu(void)
-{
-#ifdef CONFIG_IRQ_ALL_CPUS
- 	int i;
-	cpumask_t msk = CPU_MASK_NONE;
-#endif
-	spin_lock(&openpic_setup_lock);
-
-#ifdef CONFIG_IRQ_ALL_CPUS
-	cpu_set(smp_hw_index[smp_processor_id()], msk);
-
- 	/* let the openpic know we want intrs. default affinity
- 	 * is 0xffffffff until changed via /proc
- 	 * That's how it's done on x86. If we want it differently, then
- 	 * we should make sure we also change the default values of
-	 * irq_desc[].affinity in irq.c.
- 	 */
- 	for (i = 0; i < NumSources; i++)
-		openpic_mapirq(i, msk, CPU_MASK_ALL);
-#endif /* CONFIG_IRQ_ALL_CPUS */
- 	openpic_set_priority(0);
-
-	spin_unlock(&openpic_setup_lock);
-}
-#endif /* CONFIG_SMP */
-
-/*
- *  Initialize a timer interrupt (and disable it)
- *
- *  timer: OpenPIC timer number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
-{
-	check_arg_timer(timer);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Map a timer interrupt to one or more CPUs
- */
-static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
-{
-	cpumask_t phys = physmask(cpumask);
-	check_arg_timer(timer);
-	openpic_write(&OpenPIC->Global.Timer[timer].Destination,
-		      cpus_addr(phys)[0]);
-}
-
-/*
- * Change the priority of an interrupt
- */
-void __init
-openpic_set_irq_priority(u_int irq, u_int pri)
-{
-	check_arg_irq(irq);
-	openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK,
-				pri << OPENPIC_PRIORITY_SHIFT);
-}
-
-/*
- * Initalize the interrupt source which will generate an NMI.
- * This raises the interrupt's priority from 8 to 9.
- *
- * irq: The logical IRQ which generates an NMI.
- */
-void __init
-openpic_init_nmi_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
-}
-
-/*
- *
- * All functions below take an offset'ed irq argument
- *
- */
-
-/*
- * Hookup a cascade to the OpenPIC.
- */
-
-static struct irqaction openpic_cascade_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-};
-
-void __init
-openpic_hookup_cascade(u_int irq, char *name,
-	int (*cascade_fn)(void))
-{
-	openpic_cascade_irq = irq;
-	openpic_cascade_fn = cascade_fn;
-
-	if (setup_irq(irq, &openpic_cascade_irqaction))
-		printk("Unable to get OpenPIC IRQ %d for cascade\n",
-				irq - open_pic_irq_offset);
-}
-
-/*
- *  Enable/disable an external interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-static void openpic_enable_irq(u_int irq)
-{
-	volatile u_int __iomem *vpp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
-	openpic_clearfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb(); /* sync is probably useless here */
-	} while (openpic_readfield(vpp, OPENPIC_MASK));
-}
-
-static void openpic_disable_irq(u_int irq)
-{
-	volatile u_int __iomem *vpp;
-	u32 vp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
-	openpic_setfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb();  /* sync is probably useless here */
-		vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
-	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
-}
-
-#ifdef CONFIG_SMP
-/*
- *  Enable/disable an IPI interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-void openpic_enable_ipi(u_int irq)
-{
-	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
-	check_arg_ipi(irq);
-	openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-
-}
-
-void openpic_disable_ipi(u_int irq)
-{
-	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
-	check_arg_ipi(irq);
-	openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-}
-#endif
-
-/*
- *  Initialize an interrupt source (and disable it!)
- *
- *  irq: OpenPIC interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- *  pol: polarity (1 for positive, 0 for negative)
- *  sense: 1 for level, 0 for edge
- */
-static void __init
-openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
-{
-	openpic_safe_writefield(&ISR[irq]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
-				(pol ? OPENPIC_POLARITY_POSITIVE :
-			    		OPENPIC_POLARITY_NEGATIVE) |
-				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
-}
-
-/*
- *  Map an interrupt source to one or more CPUs
- */
-static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
-{
-	if (ISR[irq] == 0)
-		return;
-	if (!cpus_empty(keepmask)) {
-		cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
-		cpus_and(irqdest, irqdest, keepmask);
-		cpus_or(physmask, physmask, irqdest);
-	}
-	openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
-}
-
-#ifdef notused
-/*
- *  Set the sense for an interrupt source (and disable it!)
- *
- *  sense: 1 for level, 0 for edge
- */
-static void openpic_set_sense(u_int irq, int sense)
-{
-	if (ISR[irq] != 0)
-		openpic_safe_writefield(&ISR[irq]->Vector_Priority,
-					OPENPIC_SENSE_LEVEL,
-					(sense ? OPENPIC_SENSE_LEVEL : 0));
-}
-#endif /* notused */
-
-/* No spinlocks, should not be necessary with the OpenPIC
- * (1 register = 1 interrupt and we have the desc lock).
- */
-static void openpic_ack_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
-	openpic_disable_irq(irq_nr);
-	openpic_eoi();
-#else
-	if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
-		openpic_eoi();
-#endif
-}
-
-static void openpic_end_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-	    && irq_desc[irq_nr].action)
-		openpic_enable_irq(irq_nr);
-#else
-	if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
-		openpic_eoi();
-#endif
-}
-
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
-{
-	openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
-}
-
-#ifdef CONFIG_SMP
-static void openpic_ack_ipi(unsigned int irq_nr)
-{
-	openpic_eoi();
-}
-
-static void openpic_end_ipi(unsigned int irq_nr)
-{
-}
-
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id)
-{
-	smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset);
-	return IRQ_HANDLED;
-}
-
-#endif /* CONFIG_SMP */
-
-int
-openpic_get_irq(void)
-{
-	int irq = openpic_irq();
-
-	/*
-	 * Check for the cascade interrupt and call the cascaded
-	 * interrupt controller function (usually i8259_irq) if so.
-	 * This should move to irq.c eventually.  -- paulus
-	 */
-	if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
-		int cirq = openpic_cascade_fn();
-
-		/* Allow for the cascade being shared with other devices */
-		if (cirq != -1) {
-			irq = cirq;
-			openpic_eoi();
-		}
-	} else if (irq == OPENPIC_VEC_SPURIOUS)
-		irq = -1;
-	return irq;
-}
-
-#ifdef CONFIG_SMP
-void
-smp_openpic_message_pass(int target, int msg)
-{
-	cpumask_t mask = CPU_MASK_ALL;
-	/* make sure we're sending something that translates to an IPI */
-	if (msg > 0x3) {
-		printk("SMP %d: smp_message_pass: unknown msg %d\n",
-		       smp_processor_id(), msg);
-		return;
-	}
-	switch (target) {
-	case MSG_ALL:
-		openpic_cause_IPI(msg, mask);
-		break;
-	case MSG_ALL_BUT_SELF:
-		cpu_clear(smp_processor_id(), mask);
-		openpic_cause_IPI(msg, mask);
-		break;
-	default:
-		openpic_cause_IPI(msg, cpumask_of_cpu(target));
-		break;
-	}
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_PM
-
-/*
- * We implement the IRQ controller as a sysdev and put it
- * to sleep at powerdown stage (the callback is named suspend,
- * but it's old semantics, for the Device Model, it's really
- * powerdown). The possible problem is that another sysdev that
- * happens to be suspend after this one will have interrupts off,
- * that may be an issue... For now, this isn't an issue on pmac
- * though...
- */
-
-static u32 save_ipi_vp[OPENPIC_NUM_IPI];
-static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
-static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
-static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
-static int openpic_suspend_count;
-
-static void openpic_cached_enable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
-}
-
-static void openpic_cached_disable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_suspend(struct sys_device *sysdev, pm_message_t state)
-{
-	int	i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&openpic_setup_lock, flags);
-
-	if (openpic_suspend_count++ > 0) {
-		spin_unlock_irqrestore(&openpic_setup_lock, flags);
-		return 0;
-	}
-
- 	openpic_set_priority(0xf);
-
-	open_pic.enable = openpic_cached_enable_irq;
-	open_pic.disable = openpic_cached_disable_irq;
-
-	for (i=0; i<NumProcessors; i++) {
-		save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
-		openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
-				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
-	}
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
-		save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
-	}
-
-	spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
-	return 0;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_resume(struct sys_device *sysdev)
-{
-	int		i;
-	unsigned long	flags;
-	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
-					OPENPIC_MASK;
-
-	spin_lock_irqsave(&openpic_setup_lock, flags);
-
-	if ((--openpic_suspend_count) > 0) {
-		spin_unlock_irqrestore(&openpic_setup_lock, flags);
-		return 0;
-	}
-
-	/* OpenPIC sometimes seem to need some time to be fully back up... */
-	do {
-		openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
-	} while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
-			!= OPENPIC_VEC_SPURIOUS);
-	
-	openpic_disable_8259_pass_through();
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
-			      save_ipi_vp[i]);
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
-		openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		/* make sure mask gets to controller before we return to user */
-		do {
-			openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		} while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
-			 != (save_irq_src_vp[i] & vppmask));
-	}
-	for (i=0; i<NumProcessors; i++)
-		openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
-			      save_cpu_task_pri[i]);
-
-	open_pic.enable = openpic_enable_irq;
-	open_pic.disable = openpic_disable_irq;
-
- 	openpic_set_priority(0);
-
-	spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-static struct sysdev_class openpic_sysclass = {
-	.name = "openpic",
-};
-
-static struct sys_device device_openpic = {
-	.id		= 0,
-	.cls		= &openpic_sysclass,
-};
-
-static struct sysdev_driver driver_openpic = {
-#ifdef CONFIG_PM
-	.suspend	= &openpic_suspend,
-	.resume		= &openpic_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_openpic_sysfs(void)
-{
-	int rc;
-
-	if (!OpenPIC_Addr)
-		return -ENODEV;
-	printk(KERN_DEBUG "Registering openpic with sysfs...\n");
-	rc = sysdev_class_register(&openpic_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_openpic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys driver\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_openpic_sysfs);
-
diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c
deleted file mode 100644
index 449075a04798..000000000000
--- a/arch/ppc/syslib/open_pic2.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- *
- *  This is a duplicate of open_pic.c that deals with U3s MPIC on
- *  G5 PowerMacs. It's the same file except it's using big endian
- *  register accesses
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/machdep.h>
-
-#include "open_pic_defs.h"
-
-void *OpenPIC2_Addr;
-static volatile struct OpenPIC *OpenPIC2 = NULL;
-/*
- * We define OpenPIC_InitSenses table thusly:
- * bit 0x1: sense, 0 for edge and 1 for level.
- * bit 0x2: polarity, 0 for negative, 1 for positive.
- */
-extern  u_int OpenPIC_NumInitSenses;
-extern u_char *OpenPIC_InitSenses;
-extern int use_of_interrupt_tree;
-
-static u_int NumProcessors;
-static u_int NumSources;
-static int open_pic2_irq_offset;
-static volatile OpenPIC_Source *ISR[NR_IRQS];
-
-/* Global Operations */
-static void openpic2_disable_8259_pass_through(void);
-static void openpic2_set_priority(u_int pri);
-static void openpic2_set_spurious(u_int vector);
-
-/* Timer Interrupts */
-static void openpic2_inittimer(u_int timer, u_int pri, u_int vector);
-static void openpic2_maptimer(u_int timer, u_int cpumask);
-
-/* Interrupt Sources */
-static void openpic2_enable_irq(u_int irq);
-static void openpic2_disable_irq(u_int irq);
-static void openpic2_initirq(u_int irq, u_int pri, u_int vector, int polarity,
-			    int is_level);
-static void openpic2_mapirq(u_int irq, u_int cpumask, u_int keepmask);
-
-/*
- * These functions are not used but the code is kept here
- * for completeness and future reference.
- */
-static void openpic2_reset(void);
-#ifdef notused
-static void openpic2_enable_8259_pass_through(void);
-static u_int openpic2_get_priority(void);
-static u_int openpic2_get_spurious(void);
-static void openpic2_set_sense(u_int irq, int sense);
-#endif /* notused */
-
-/*
- * Description of the openpic for the higher-level irq code
- */
-static void openpic2_end_irq(unsigned int irq_nr);
-static void openpic2_ack_irq(unsigned int irq_nr);
-
-struct hw_interrupt_type open_pic2 = {
-	.typename = " OpenPIC2 ",
-	.enable = openpic2_enable_irq,
-	.disable = openpic2_disable_irq,
-	.ack = openpic2_ack_irq,
-	.end = openpic2_end_irq,
-};
-
-/*
- *  Accesses to the current processor's openpic registers
- *  On cascaded controller, this is only CPU 0
- */
-#define THIS_CPU		Processor[0]
-#define DECL_THIS_CPU
-#define CHECK_THIS_CPU
-
-#if 1
-#define check_arg_ipi(ipi) \
-    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk("open_pic.c:%d: illegal ipi %d\n", __LINE__, ipi);
-#define check_arg_timer(timer) \
-    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk("open_pic.c:%d: illegal timer %d\n", __LINE__, timer);
-#define check_arg_vec(vec) \
-    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk("open_pic.c:%d: illegal vector %d\n", __LINE__, vec);
-#define check_arg_pri(pri) \
-    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk("open_pic.c:%d: illegal priority %d\n", __LINE__, pri);
-/*
- * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
- * data has probably been corrupted and we're going to panic or deadlock later
- * anyway --Troy
- */
-extern unsigned long* _get_SP(void);
-#define check_arg_irq(irq) \
-    if (irq < open_pic2_irq_offset || irq >= NumSources+open_pic2_irq_offset \
-	|| ISR[irq - open_pic2_irq_offset] == 0) { \
-      printk("open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
-      /*print_backtrace(_get_SP());*/ }
-#define check_arg_cpu(cpu) \
-    if (cpu < 0 || cpu >= NumProcessors){ \
-	printk("open_pic2.c:%d: illegal cpu %d\n", __LINE__, cpu); \
-	/*print_backtrace(_get_SP());*/ }
-#else
-#define check_arg_ipi(ipi)	do {} while (0)
-#define check_arg_timer(timer)	do {} while (0)
-#define check_arg_vec(vec)	do {} while (0)
-#define check_arg_pri(pri)	do {} while (0)
-#define check_arg_irq(irq)	do {} while (0)
-#define check_arg_cpu(cpu)	do {} while (0)
-#endif
-
-static u_int openpic2_read(volatile u_int *addr)
-{
-	u_int val;
-
-	val = in_be32(addr);
-	return val;
-}
-
-static inline void openpic2_write(volatile u_int *addr, u_int val)
-{
-	out_be32(addr, val);
-}
-
-static inline u_int openpic2_readfield(volatile u_int *addr, u_int mask)
-{
-	u_int val = openpic2_read(addr);
-	return val & mask;
-}
-
-inline void openpic2_writefield(volatile u_int *addr, u_int mask,
-			       u_int field)
-{
-	u_int val = openpic2_read(addr);
-	openpic2_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic2_clearfield(volatile u_int *addr, u_int mask)
-{
-	openpic2_writefield(addr, mask, 0);
-}
-
-static inline void openpic2_setfield(volatile u_int *addr, u_int mask)
-{
-	openpic2_writefield(addr, mask, mask);
-}
-
-static void openpic2_safe_writefield(volatile u_int *addr, u_int mask,
-				    u_int field)
-{
-	openpic2_setfield(addr, OPENPIC_MASK);
-	while (openpic2_read(addr) & OPENPIC_ACTIVITY);
-	openpic2_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-
-static void openpic2_reset(void)
-{
-	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_RESET);
-	while (openpic2_readfield(&OpenPIC2->Global.Global_Configuration0,
-				 OPENPIC_CONFIG_RESET))
-		mb();
-}
-
-void __init openpic2_set_sources(int first_irq, int num_irqs, void *first_ISR)
-{
-	volatile OpenPIC_Source *src = first_ISR;
-	int i, last_irq;
-
-	last_irq = first_irq + num_irqs;
-	if (last_irq > NumSources)
-		NumSources = last_irq;
-	if (src == 0)
-		src = &((struct OpenPIC *)OpenPIC2_Addr)->Source[first_irq];
-	for (i = first_irq; i < last_irq; ++i, ++src)
-		ISR[i] = src;
-}
-
-/*
- * The `offset' parameter defines where the interrupts handled by the
- * OpenPIC start in the space of interrupt numbers that the kernel knows
- * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
- * kernel's interrupt numbering scheme.
- * We assume there is only one OpenPIC.
- */
-void __init openpic2_init(int offset)
-{
-	u_int t, i;
-	u_int timerfreq;
-	const char *version;
-
-	if (!OpenPIC2_Addr) {
-		printk("No OpenPIC2 found !\n");
-		return;
-	}
-	OpenPIC2 = (volatile struct OpenPIC *)OpenPIC2_Addr;
-
-	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
-
-	t = openpic2_read(&OpenPIC2->Global.Feature_Reporting0);
-	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
-	case 1:
-		version = "1.0";
-		break;
-	case 2:
-		version = "1.2";
-		break;
-	case 3:
-		version = "1.3";
-		break;
-	default:
-		version = "?";
-		break;
-	}
-	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
-			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
-	if (NumSources == 0)
-		openpic2_set_sources(0,
-				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
-				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
-				    NULL);
-	printk("OpenPIC (2) Version %s (%d CPUs and %d IRQ sources) at %p\n",
-	       version, NumProcessors, NumSources, OpenPIC2);
-	timerfreq = openpic2_read(&OpenPIC2->Global.Timer_Frequency);
-	if (timerfreq)
-		printk("OpenPIC timer frequency is %d.%06d MHz\n",
-		       timerfreq / 1000000, timerfreq % 1000000);
-
-	open_pic2_irq_offset = offset;
-
-	/* Initialize timer interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic2: timer",0x3ba);
-	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
-		/* Disabled, Priority 0 */
-		openpic2_inittimer(i, 0, OPENPIC2_VEC_TIMER+i+offset);
-		/* No processor */
-		openpic2_maptimer(i, 0);
-	}
-
-	/* Initialize external interrupts */
-	if (ppc_md.progress) ppc_md.progress("openpic2: external",0x3bc);
-
-	openpic2_set_priority(0xf);
-
-	/* Init all external sources, including possibly the cascade. */
-	for (i = 0; i < NumSources; i++) {
-		int sense;
-
-		if (ISR[i] == 0)
-			continue;
-
-		/* the bootloader may have left it enabled (bad !) */
-		openpic2_disable_irq(i+offset);
-
-		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
-				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
-		if (sense & IRQ_SENSE_MASK)
-			irq_desc[i+offset].status = IRQ_LEVEL;
-
-		/* Enabled, Priority 8 */
-		openpic2_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
-				(sense & IRQ_SENSE_MASK));
-		/* Processor 0 */
-		openpic2_mapirq(i, 1<<0, 0);
-	}
-
-	/* Init descriptors */
-	for (i = offset; i < NumSources + offset; i++)
-		irq_desc[i].chip = &open_pic2;
-
-	/* Initialize the spurious interrupt */
-	if (ppc_md.progress) ppc_md.progress("openpic2: spurious",0x3bd);
-	openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+offset);
-
-	openpic2_disable_8259_pass_through();
-	openpic2_set_priority(0);
-
-	if (ppc_md.progress) ppc_md.progress("openpic2: exit",0x222);
-}
-
-#ifdef notused
-static void openpic2_enable_8259_pass_through(void)
-{
-	openpic2_clearfield(&OpenPIC2->Global.Global_Configuration0,
-			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-#endif /* notused */
-
-/* This can't be __init, it is used in openpic_sleep_restore_intrs */
-static void openpic2_disable_8259_pass_through(void)
-{
-	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-
-/*
- *  Find out the current interrupt
- */
-u_int openpic2_irq(void)
-{
-	u_int vec;
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	vec = openpic2_readfield(&OpenPIC2->THIS_CPU.Interrupt_Acknowledge,
-				OPENPIC_VECTOR_MASK);
-	return vec;
-}
-
-void openpic2_eoi(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	openpic2_write(&OpenPIC2->THIS_CPU.EOI, 0);
-	/* Handle PCI write posting */
-	(void)openpic2_read(&OpenPIC2->THIS_CPU.EOI);
-}
-
-#ifdef notused
-static u_int openpic2_get_priority(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	return openpic2_readfield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
-				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
-}
-#endif /* notused */
-
-static void __init openpic2_set_priority(u_int pri)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_pri(pri);
-	openpic2_writefield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
-			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
-}
-
-/*
- *  Get/set the spurious vector
- */
-#ifdef notused
-static u_int openpic2_get_spurious(void)
-{
-	return openpic2_readfield(&OpenPIC2->Global.Spurious_Vector,
-				 OPENPIC_VECTOR_MASK);
-}
-#endif /* notused */
-
-/* This can't be __init, it is used in openpic_sleep_restore_intrs */
-static void openpic2_set_spurious(u_int vec)
-{
-	check_arg_vec(vec);
-	openpic2_writefield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
-			   vec);
-}
-
-static DEFINE_SPINLOCK(openpic2_setup_lock);
-
-/*
- *  Initialize a timer interrupt (and disable it)
- *
- *  timer: OpenPIC timer number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic2_inittimer(u_int timer, u_int pri, u_int vec)
-{
-	check_arg_timer(timer);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic2_safe_writefield(&OpenPIC2->Global.Timer[timer].Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Map a timer interrupt to one or more CPUs
- */
-static void __init openpic2_maptimer(u_int timer, u_int cpumask)
-{
-	check_arg_timer(timer);
-	openpic2_write(&OpenPIC2->Global.Timer[timer].Destination,
-		      cpumask);
-}
-
-/*
- * Initalize the interrupt source which will generate an NMI.
- * This raises the interrupt's priority from 8 to 9.
- *
- * irq: The logical IRQ which generates an NMI.
- */
-void __init
-openpic2_init_nmi_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	openpic2_safe_writefield(&ISR[irq - open_pic2_irq_offset]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK,
-				9 << OPENPIC_PRIORITY_SHIFT);
-}
-
-/*
- *
- * All functions below take an offset'ed irq argument
- *
- */
-
-
-/*
- *  Enable/disable an external interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-static void openpic2_enable_irq(u_int irq)
-{
-	volatile u_int *vpp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
-       	openpic2_clearfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-       	do {
-       		mb(); /* sync is probably useless here */
-       	} while (openpic2_readfield(vpp, OPENPIC_MASK));
-}
-
-static void openpic2_disable_irq(u_int irq)
-{
-	volatile u_int *vpp;
-	u32 vp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
-	openpic2_setfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb();  /* sync is probably useless here */
-		vp = openpic2_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
-	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
-}
-
-
-/*
- *  Initialize an interrupt source (and disable it!)
- *
- *  irq: OpenPIC interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- *  pol: polarity (1 for positive, 0 for negative)
- *  sense: 1 for level, 0 for edge
- */
-static void __init
-openpic2_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
-{
-	openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
-				(pol ? OPENPIC_POLARITY_POSITIVE :
-			    		OPENPIC_POLARITY_NEGATIVE) |
-				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
-}
-
-/*
- *  Map an interrupt source to one or more CPUs
- */
-static void openpic2_mapirq(u_int irq, u_int physmask, u_int keepmask)
-{
-	if (ISR[irq] == 0)
-		return;
-	if (keepmask != 0)
-		physmask |= openpic2_read(&ISR[irq]->Destination) & keepmask;
-	openpic2_write(&ISR[irq]->Destination, physmask);
-}
-
-#ifdef notused
-/*
- *  Set the sense for an interrupt source (and disable it!)
- *
- *  sense: 1 for level, 0 for edge
- */
-static void openpic2_set_sense(u_int irq, int sense)
-{
-	if (ISR[irq] != 0)
-		openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
-					OPENPIC_SENSE_LEVEL,
-					(sense ? OPENPIC_SENSE_LEVEL : 0));
-}
-#endif /* notused */
-
-/* No spinlocks, should not be necessary with the OpenPIC
- * (1 register = 1 interrupt and we have the desc lock).
- */
-static void openpic2_ack_irq(unsigned int irq_nr)
-{
-	openpic2_disable_irq(irq_nr);
-	openpic2_eoi();
-}
-
-static void openpic2_end_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		openpic2_enable_irq(irq_nr);
-}
-
-int
-openpic2_get_irq(void)
-{
-	int irq = openpic2_irq();
-
-	if (irq == (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset))
-		irq = -1;
-	return irq;
-}
-
-#ifdef CONFIG_PM
-
-/*
- * We implement the IRQ controller as a sysdev and put it
- * to sleep at powerdown stage (the callback is named suspend,
- * but it's old semantics, for the Device Model, it's really
- * powerdown). The possible problem is that another sysdev that
- * happens to be suspend after this one will have interrupts off,
- * that may be an issue... For now, this isn't an issue on pmac
- * though...
- */
-
-static u32 save_ipi_vp[OPENPIC_NUM_IPI];
-static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
-static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
-static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
-static int openpic_suspend_count;
-
-static void openpic2_cached_enable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic2_irq_offset] &= ~OPENPIC_MASK;
-}
-
-static void openpic2_cached_disable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic2_irq_offset] |= OPENPIC_MASK;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic2_suspend(struct sys_device *sysdev, pm_message_t state)
-{
-	int	i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&openpic2_setup_lock, flags);
-
-	if (openpic_suspend_count++ > 0) {
-		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-		return 0;
-	}
-
-	open_pic2.enable = openpic2_cached_enable_irq;
-	open_pic2.disable = openpic2_cached_disable_irq;
-
-	for (i=0; i<NumProcessors; i++) {
-		save_cpu_task_pri[i] = openpic2_read(&OpenPIC2->Processor[i].Current_Task_Priority);
-		openpic2_writefield(&OpenPIC2->Processor[i].Current_Task_Priority,
-				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
-	}
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		save_ipi_vp[i] = openpic2_read(&OpenPIC2->Global.IPI_Vector_Priority(i));
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		save_irq_src_vp[i] = openpic2_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
-		save_irq_src_dest[i] = openpic2_read(&ISR[i]->Destination);
-	}
-
-	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-
-	return 0;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic2_resume(struct sys_device *sysdev)
-{
-	int		i;
-	unsigned long	flags;
-	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
-					OPENPIC_MASK;
-
-	spin_lock_irqsave(&openpic2_setup_lock, flags);
-
-	if ((--openpic_suspend_count) > 0) {
-		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-		return 0;
-	}
-
-	openpic2_reset();
-
-	/* OpenPIC sometimes seem to need some time to be fully back up... */
-	do {
-		openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+open_pic2_irq_offset);
-	} while(openpic2_readfield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
-			!= (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset));
-	
-	openpic2_disable_8259_pass_through();
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		openpic2_write(&OpenPIC2->Global.IPI_Vector_Priority(i),
-			      save_ipi_vp[i]);
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		openpic2_write(&ISR[i]->Destination, save_irq_src_dest[i]);
-		openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		/* make sure mask gets to controller before we return to user */
-		do {
-			openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		} while (openpic2_readfield(&ISR[i]->Vector_Priority, vppmask)
-			 != (save_irq_src_vp[i] & vppmask));
-	}
-	for (i=0; i<NumProcessors; i++)
-		openpic2_write(&OpenPIC2->Processor[i].Current_Task_Priority,
-			      save_cpu_task_pri[i]);
-
-	open_pic2.enable = openpic2_enable_irq;
-	open_pic2.disable = openpic2_disable_irq;
-
-	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-/* HACK ALERT */
-static struct sysdev_class openpic2_sysclass = {
-	.name = "openpic2",
-};
-
-static struct sys_device device_openpic2 = {
-	.id		= 0,
-	.cls		= &openpic2_sysclass,
-};
-
-static struct sysdev_driver driver_openpic2 = {
-#ifdef CONFIG_PM
-	.suspend	= &openpic2_suspend,
-	.resume		= &openpic2_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_openpic2_sysfs(void)
-{
-	int rc;
-
-	if (!OpenPIC2_Addr)
-		return -ENODEV;
-	printk(KERN_DEBUG "Registering openpic2 with sysfs...\n");
-	rc = sysdev_class_register(&openpic2_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_openpic2);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&openpic2_sysclass, &driver_openpic2);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys driver\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_openpic2_sysfs);
-
diff --git a/arch/ppc/syslib/open_pic_defs.h b/arch/ppc/syslib/open_pic_defs.h
deleted file mode 100644
index 3a25de7cb572..000000000000
--- a/arch/ppc/syslib/open_pic_defs.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is based on the following documentation:
- *
- *	The Open Programmable Interrupt Controller (PIC)
- *	Register Interface Specification Revision 1.2
- *
- *	Issue Date: October 1995
- *
- *	Issued jointly by Advanced Micro Devices and Cyrix Corporation
- *
- *	AMD is a registered trademark of Advanced Micro Devices, Inc.
- *	Copyright (C) 1995, Advanced Micro Devices, Inc. and Cyrix, Inc.
- *	All Rights Reserved.
- *
- *  To receive a copy of this documentation, send an email to openpic@amd.com.
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#ifndef _LINUX_OPENPIC_H
-#define _LINUX_OPENPIC_H
-
-#ifdef __KERNEL__
-
-    /*
-     *  OpenPIC supports up to 2048 interrupt sources and up to 32 processors
-     */
-
-#define OPENPIC_MAX_SOURCES	2048
-#define OPENPIC_MAX_PROCESSORS	32
-#define OPENPIC_MAX_ISU		16
-
-#define OPENPIC_NUM_TIMERS	4
-#define OPENPIC_NUM_IPI		4
-#define OPENPIC_NUM_PRI		16
-#define OPENPIC_NUM_VECTORS	256
-
-
-
-    /*
-     *  OpenPIC Registers are 32 bits and aligned on 128 bit boundaries
-     */
-
-typedef struct _OpenPIC_Reg {
-    u_int Reg;					/* Little endian! */
-    char Pad[0xc];
-} OpenPIC_Reg;
-
-
-    /*
-     *  Per Processor Registers
-     */
-
-typedef struct _OpenPIC_Processor {
-    /*
-     *  Private Shadow Registers (for SLiC backwards compatibility)
-     */
-    u_int IPI0_Dispatch_Shadow;			/* Write Only */
-    char Pad1[0x4];
-    u_int IPI0_Vector_Priority_Shadow;		/* Read/Write */
-    char Pad2[0x34];
-    /*
-     *  Interprocessor Interrupt Command Ports
-     */
-    OpenPIC_Reg _IPI_Dispatch[OPENPIC_NUM_IPI];	/* Write Only */
-    /*
-     *  Current Task Priority Register
-     */
-    OpenPIC_Reg _Current_Task_Priority;		/* Read/Write */
-    char Pad3[0x10];
-    /*
-     *  Interrupt Acknowledge Register
-     */
-    OpenPIC_Reg _Interrupt_Acknowledge;		/* Read Only */
-    /*
-     *  End of Interrupt (EOI) Register
-     */
-    OpenPIC_Reg _EOI;				/* Read/Write */
-    char Pad5[0xf40];
-} OpenPIC_Processor;
-
-
-    /*
-     *  Timer Registers
-     */
-
-typedef struct _OpenPIC_Timer {
-    OpenPIC_Reg _Current_Count;			/* Read Only */
-    OpenPIC_Reg _Base_Count;			/* Read/Write */
-    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
-    OpenPIC_Reg _Destination;			/* Read/Write */
-} OpenPIC_Timer;
-
-
-    /*
-     *  Global Registers
-     */
-
-typedef struct _OpenPIC_Global {
-    /*
-     *  Feature Reporting Registers
-     */
-    OpenPIC_Reg _Feature_Reporting0;		/* Read Only */
-    OpenPIC_Reg _Feature_Reporting1;		/* Future Expansion */
-    /*
-     *  Global Configuration Registers
-     */
-    OpenPIC_Reg _Global_Configuration0;		/* Read/Write */
-    OpenPIC_Reg _Global_Configuration1;		/* Future Expansion */
-    /*
-     *  Vendor Specific Registers
-     */
-    OpenPIC_Reg _Vendor_Specific[4];
-    /*
-     *  Vendor Identification Register
-     */
-    OpenPIC_Reg _Vendor_Identification;		/* Read Only */
-    /*
-     *  Processor Initialization Register
-     */
-    OpenPIC_Reg _Processor_Initialization;	/* Read/Write */
-    /*
-     *  IPI Vector/Priority Registers
-     */
-    OpenPIC_Reg _IPI_Vector_Priority[OPENPIC_NUM_IPI];	/* Read/Write */
-    /*
-     *  Spurious Vector Register
-     */
-    OpenPIC_Reg _Spurious_Vector;		/* Read/Write */
-    /*
-     *  Global Timer Registers
-     */
-    OpenPIC_Reg _Timer_Frequency;		/* Read/Write */
-    OpenPIC_Timer Timer[OPENPIC_NUM_TIMERS];
-    char Pad1[0xee00];
-} OpenPIC_Global;
-
-
-    /*
-     *  Interrupt Source Registers
-     */
-
-typedef struct _OpenPIC_Source {
-    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
-    OpenPIC_Reg _Destination;			/* Read/Write */
-} OpenPIC_Source, *OpenPIC_SourcePtr;
-
-
-    /*
-     *  OpenPIC Register Map
-     */
-
-struct OpenPIC {
-    char Pad1[0x1000];
-    /*
-     *  Global Registers
-     */
-    OpenPIC_Global Global;
-    /*
-     *  Interrupt Source Configuration Registers
-     */
-    OpenPIC_Source Source[OPENPIC_MAX_SOURCES];
-    /*
-     *  Per Processor Registers
-     */
-    OpenPIC_Processor Processor[OPENPIC_MAX_PROCESSORS];
-};
-
-    /*
-     *  Current Task Priority Register
-     */
-
-#define OPENPIC_CURRENT_TASK_PRIORITY_MASK	0x0000000f
-
-    /*
-     *  Who Am I Register
-     */
-
-#define OPENPIC_WHO_AM_I_ID_MASK		0x0000001f
-
-    /*
-     *  Feature Reporting Register 0
-     */
-
-#define OPENPIC_FEATURE_LAST_SOURCE_MASK	0x07ff0000
-#define OPENPIC_FEATURE_LAST_SOURCE_SHIFT	16
-#define OPENPIC_FEATURE_LAST_PROCESSOR_MASK	0x00001f00
-#define OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT	8
-#define OPENPIC_FEATURE_VERSION_MASK		0x000000ff
-
-    /*
-     *  Global Configuration Register 0
-     */
-
-#define OPENPIC_CONFIG_RESET			0x80000000
-#define OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE	0x20000000
-#define OPENPIC_CONFIG_BASE_MASK		0x000fffff
-
-    /*
-     *  Global Configuration Register 1
-     *  This is the EICR on EPICs.
-     */
-
-#define OPENPIC_EICR_S_CLK_MASK			0x70000000
-#define OPENPIC_EICR_SIE			0x08000000
-
-    /*
-     *  Vendor Identification Register
-     */
-
-#define OPENPIC_VENDOR_ID_STEPPING_MASK		0x00ff0000
-#define OPENPIC_VENDOR_ID_STEPPING_SHIFT	16
-#define OPENPIC_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
-#define OPENPIC_VENDOR_ID_DEVICE_ID_SHIFT	8
-#define OPENPIC_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
-
-    /*
-     *  Vector/Priority Registers
-     */
-
-#define OPENPIC_MASK				0x80000000
-#define OPENPIC_ACTIVITY			0x40000000	/* Read Only */
-#define OPENPIC_PRIORITY_MASK			0x000f0000
-#define OPENPIC_PRIORITY_SHIFT			16
-#define OPENPIC_VECTOR_MASK			0x000000ff
-
-
-    /*
-     *  Interrupt Source Registers
-     */
-
-#define OPENPIC_POLARITY_POSITIVE		0x00800000
-#define OPENPIC_POLARITY_NEGATIVE		0x00000000
-#define OPENPIC_POLARITY_MASK			0x00800000
-#define OPENPIC_SENSE_LEVEL			0x00400000
-#define OPENPIC_SENSE_EDGE			0x00000000
-#define OPENPIC_SENSE_MASK			0x00400000
-
-
-    /*
-     *  Timer Registers
-     */
-
-#define OPENPIC_COUNT_MASK			0x7fffffff
-#define OPENPIC_TIMER_TOGGLE			0x80000000
-#define OPENPIC_TIMER_COUNT_INHIBIT		0x80000000
-
-
-    /*
-     *  Aliases to make life simpler
-     */
-
-/* Per Processor Registers */
-#define IPI_Dispatch(i)			_IPI_Dispatch[i].Reg
-#define Current_Task_Priority		_Current_Task_Priority.Reg
-#define Interrupt_Acknowledge		_Interrupt_Acknowledge.Reg
-#define EOI				_EOI.Reg
-
-/* Global Registers */
-#define Feature_Reporting0		_Feature_Reporting0.Reg
-#define Feature_Reporting1		_Feature_Reporting1.Reg
-#define Global_Configuration0		_Global_Configuration0.Reg
-#define Global_Configuration1		_Global_Configuration1.Reg
-#define Vendor_Specific(i)		_Vendor_Specific[i].Reg
-#define Vendor_Identification		_Vendor_Identification.Reg
-#define Processor_Initialization	_Processor_Initialization.Reg
-#define IPI_Vector_Priority(i)		_IPI_Vector_Priority[i].Reg
-#define Spurious_Vector			_Spurious_Vector.Reg
-#define Timer_Frequency			_Timer_Frequency.Reg
-
-/* Timer Registers */
-#define Current_Count			_Current_Count.Reg
-#define Base_Count			_Base_Count.Reg
-#define Vector_Priority			_Vector_Priority.Reg
-#define Destination			_Destination.Reg
-
-/* Interrupt Source Registers */
-#define Vector_Priority			_Vector_Priority.Reg
-#define Destination			_Destination.Reg
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_OPENPIC_H */
diff --git a/arch/ppc/syslib/pci_auto.c b/arch/ppc/syslib/pci_auto.c
deleted file mode 100644
index ee20a86fcc4b..000000000000
--- a/arch/ppc/syslib/pci_auto.c
+++ /dev/null
@@ -1,515 +0,0 @@
-/*
- * PCI autoconfiguration library
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The CardBus support is very preliminary.  Preallocating space is
- * the way to go but will require some change in card services to
- * make it useful.  Eventually this will ensure that we can put
- * multiple CB bridges behind multiple P2P bridges.  For now, at
- * least it ensures that we place the CB bridge BAR and assigned
- * initial bus numbers.  I definitely need to do something about
- * the lack of 16-bit I/O support. -MDP
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/pci-bridge.h>
-
-#define	PCIAUTO_IDE_MODE_MASK		0x05
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-static int pciauto_upper_iospc;
-static int pciauto_upper_memspc;
-
-void __init pciauto_setup_bars(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int bar_limit)
-{
-	int bar_response, bar_size, bar_value;
-	int bar, addr_mask;
-	int * upper_limit;
-	int found_mem64 = 0;
-
-	DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
-		current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );
-
-	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
-		/* Tickle the BAR and get the response */
-		early_write_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				0xffffffff);
-		early_read_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				&bar_response);
-
-		/* If BAR is not implemented go to the next BAR */
-		if (!bar_response)
-			continue;
-
-		/* Check the BAR type and set our address mask */
-		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-			addr_mask = PCI_BASE_ADDRESS_IO_MASK;
-			upper_limit = &pciauto_upper_iospc;
-			DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar);
-		} else {
-			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-			PCI_BASE_ADDRESS_MEM_TYPE_64)
-				found_mem64 = 1;
-
-			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;	
-			upper_limit = &pciauto_upper_memspc;
-			DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar);
-		}
-
-		/* Calculate requested size */
-		bar_size = ~(bar_response & addr_mask) + 1;
-
-		/* Allocate a base address */
-		bar_value = (*upper_limit - bar_size) & ~(bar_size - 1);
-
-		/* Write it out and update our limit */
-		early_write_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				bar_value);
-
-		*upper_limit = bar_value;
-
-		/*
-		 * If we are a 64-bit decoder then increment to the
-		 * upper 32 bits of the bar and force it to locate
-		 * in the lower 4GB of memory.
-		 */
-		if (found_mem64) {
-			bar += 4;
-			early_write_config_dword(hose,
-					current_bus,
-					pci_devfn,
-					bar,
-					0x00000000);
-			found_mem64 = 0;
-		}
-
-		DBG("size=0x%x, address=0x%x\n",
-			bar_size, bar_value);
-	}
-
-}
-
-void __init pciauto_prescan_setup_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PRIMARY_BUS,
-			current_bus);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SECONDARY_BUS,
-			sub_bus + 1);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			0xff);
-
-	/* Round memory allocator to 1MB boundary */
-	pciauto_upper_memspc &= ~(0x100000 - 1);
-	*memsave = pciauto_upper_memspc;
-
-	/* Round I/O allocator to 4KB boundary */
-	pciauto_upper_iospc &= ~(0x1000 - 1);
-	*iosave = pciauto_upper_iospc;
-
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_MEMORY_LIMIT,
-			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_LIMIT,
-			((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_LIMIT_UPPER16,
-			((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);
-
-	/* Zero upper 32 bits of prefetchable base/limit */
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_BASE_UPPER32,
-			0);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_LIMIT_UPPER32,
-			0);
-}
-
-void __init pciauto_postscan_setup_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	int cmdstat;
-
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			sub_bus);
-
-	/*
-	 * Round memory allocator to 1MB boundary.
-	 * If no space used, allocate minimum.
-	 */
-	pciauto_upper_memspc &= ~(0x100000 - 1);
-	if (*memsave == pciauto_upper_memspc)
-		pciauto_upper_memspc -= 0x00100000;
-
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_MEMORY_BASE,
-			pciauto_upper_memspc >> 16);
-
-	/* Allocate 1MB for pre-fretch */
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_MEMORY_LIMIT,
-			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
-
-	pciauto_upper_memspc -= 0x100000;
-
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_MEMORY_BASE,
-			pciauto_upper_memspc >> 16);
-
-	/* Round I/O allocator to 4KB boundary */
-	pciauto_upper_iospc &= ~(0x1000 - 1);
-	if (*iosave == pciauto_upper_iospc)
-		pciauto_upper_iospc -= 0x1000;
-
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_BASE,
-			(pciauto_upper_iospc & 0x0000f000) >> 8);
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_BASE_UPPER16,
-			pciauto_upper_iospc >> 16);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			&cmdstat);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			cmdstat |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER);
-}
-
-void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PRIMARY_BUS,
-			current_bus);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SECONDARY_BUS,
-			sub_bus + 1);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			0xff);
-
-	/* Round memory allocator to 4KB boundary */
-	pciauto_upper_memspc &= ~(0x1000 - 1);
-	*memsave = pciauto_upper_memspc;
-
-	/* Round I/O allocator to 4 byte boundary */
-	pciauto_upper_iospc &= ~(0x4 - 1);
-	*iosave = pciauto_upper_iospc;
-
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x20,
-			pciauto_upper_memspc - 1);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x30,
-			pciauto_upper_iospc - 1);
-}
-
-void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	int cmdstat;
-
-	/*
-	 * Configure subordinate bus number.  The PCI subsystem
-	 * bus scan will renumber buses (reserving three additional
-	 * for this PCI<->CardBus bridge for the case where a CardBus
-	 * adapter contains a P2P or CB2CB bridge.
-	 */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			sub_bus);
-
-	/*
-	 * Reserve an additional 4MB for mem space and 16KB for
-	 * I/O space.  This should cover any additional space
-	 * requirement of unusual CardBus devices with
-	 * additional bridges that can consume more address space.
-	 *
-	 * Although pcmcia-cs currently will reprogram bridge
-	 * windows, the goal is to add an option to leave them
-	 * alone and use the bridge window ranges as the regions
-	 * that are searched for free resources upon hot-insertion
-	 * of a device.  This will allow a PCI<->CardBus bridge
-	 * configured by this routine to happily live behind a
-	 * P2P bridge in a system.
-	 */
-	pciauto_upper_memspc -= 0x00400000;
-	pciauto_upper_iospc -= 0x00004000;
-
-	/* Round memory allocator to 4KB boundary */
-	pciauto_upper_memspc &= ~(0x1000 - 1);
-
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x1c,
-			pciauto_upper_memspc);
-
-	/* Round I/O allocator to 4 byte boundary */
-	pciauto_upper_iospc &= ~(0x4 - 1);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x2c,
-			pciauto_upper_iospc);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			&cmdstat);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			cmdstat |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER);
-}
-
-int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus)
-{
-	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0;
-	unsigned short vid;
-	unsigned char header_type;
-
-	/*
-	 * Fetch our I/O and memory space upper boundaries used
-	 * to allocated base addresses on this hose.
-	 */
-	if (current_bus == hose->first_busno) {
-		pciauto_upper_iospc = hose->io_space.end + 1;
-		pciauto_upper_memspc = hose->mem_space.end + 1;
-	}
-
-	sub_bus = current_bus;
-
-	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
-		/* Skip our host bridge */
-		if ( (current_bus == hose->first_busno) && (pci_devfn == 0) )
-			continue;
-
-		if (PCI_FUNC(pci_devfn) && !found_multi)
-			continue;
-
-		/* If config space read fails from this device, move on */
-		if (early_read_config_byte(hose,
-				current_bus,
-				pci_devfn,
-				PCI_HEADER_TYPE,
-				&header_type))
-			continue;
-
-		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
-
-		early_read_config_word(hose,
-				current_bus,
-				pci_devfn,
-				PCI_VENDOR_ID,
-				&vid);
-
-		if (vid != 0xffff) {
-			early_read_config_dword(hose,
-					current_bus,
-					pci_devfn,
-					PCI_CLASS_REVISION, &pci_class);
-			if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) {
-				int iosave, memsave;
-
-				DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn));
-				/* Allocate PCI I/O and/or memory space */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_1);
-
-				pciauto_prescan_setup_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
-				pciauto_postscan_setup_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-			} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
-				int iosave, memsave;
-
-				DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
-				/* Place CardBus Socket/ExCA registers */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_0);
-
-				pciauto_prescan_setup_cardbus_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
-				pciauto_postscan_setup_cardbus_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-			} else {
-				if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
-					unsigned char prg_iface;
-
-					early_read_config_byte(hose,
-							current_bus,
-							pci_devfn,
-							PCI_CLASS_PROG,
-							&prg_iface);
-					if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
-						DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n");
-						continue;
-					}
-				}
-				/* Allocate PCI I/O and/or memory space */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_5);
-
-				/*
-				 * Enable some standard settings
-				 */
-				early_read_config_dword(hose,
-						current_bus,
-						pci_devfn,
-						PCI_COMMAND,
-						&cmdstat);
-				early_write_config_dword(hose,
-						current_bus,
-						pci_devfn,
-						PCI_COMMAND,
-						cmdstat |
-						PCI_COMMAND_IO |
-						PCI_COMMAND_MEMORY |
-						PCI_COMMAND_MASTER);
-				early_write_config_byte(hose,
-						current_bus,
-						pci_devfn,
-						PCI_LATENCY_TIMER,
-						0x80);
-			}
-		}
-	}
-	return sub_bus;
-}
diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c
deleted file mode 100644
index c3b7b8bfbcfe..000000000000
--- a/arch/ppc/syslib/ppc403_pic.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- *
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- *    Module name: ppc403_pic.c
- *
- *    Description:
- *      Interrupt controller driver for PowerPC 403-based processors.
- */
-
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/stddef.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/machdep.h>
-
-/* Function Prototypes */
-
-static void ppc403_aic_enable(unsigned int irq);
-static void ppc403_aic_disable(unsigned int irq);
-static void ppc403_aic_disable_and_ack(unsigned int irq);
-
-static struct hw_interrupt_type ppc403_aic = {
-	.typename = "403GC AIC",
-	.enable = ppc403_aic_enable,
-	.disable = ppc403_aic_disable,
-	.ack = ppc403_aic_disable_and_ack,
-};
-
-int
-ppc403_pic_get_irq(void)
-{
-	int irq;
-	unsigned long bits;
-
-	/*
-	 * Only report the status of those interrupts that are actually
-	 * enabled.
-	 */
-
-	bits = mfdcr(DCRN_EXISR) & mfdcr(DCRN_EXIER);
-
-	/*
-	 * Walk through the interrupts from highest priority to lowest, and
-	 * report the first pending interrupt found.
-	 * We want PPC, not C bit numbering, so just subtract the ffs()
-	 * result from 32.
-	 */
-	irq = 32 - ffs(bits);
-
-	if (irq == NR_AIC_IRQS)
-		irq = -1;
-
-	return (irq);
-}
-
-static void
-ppc403_aic_enable(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-}
-
-static void
-ppc403_aic_disable(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-}
-
-static void
-ppc403_aic_disable_and_ack(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-	mtdcr(DCRN_EXISR, (1 << (31 - bit)));
-}
-
-void __init
-ppc4xx_pic_init(void)
-{
-	int i;
-
-	/*
-	 * Disable all external interrupts until they are
-	 * explicitly requested.
-	 */
-	ppc_cached_irq_mask[0] = 0;
-
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[0]);
-
-	ppc_md.get_irq = ppc403_pic_get_irq;
-
-	for (i = 0; i < NR_IRQS; i++)
-		irq_desc[i].chip = &ppc403_aic;
-}
diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c
deleted file mode 100644
index 9e9035693bfa..000000000000
--- a/arch/ppc/syslib/ppc405_pci.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Authors: Frank Rowand <frank_rowand@mvista.com>,
- * Debbie Chu <debbie_chu@mvista.com>, or source@mvista.com
- * Further modifications by Armin Kuster <akuster@mvista.com>
- *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Based on arch/ppc/kernel/indirect.c, Copyright (C) 1998 Gabriel Paubert.
- */
-
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/machdep.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <asm/ocp.h>
-#include <asm/ibm4xx.h>
-#include <asm/pci-bridge.h>
-#include <asm/ibm_ocp_pci.h>
-
-
-extern void bios_fixup(struct pci_controller *, struct pcil0_regs *);
-extern int ppc405_map_irq(struct pci_dev *dev, unsigned char idsel,
-			  unsigned char pin);
-
-void
-ppc405_pcibios_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-	unsigned long max_host_addr;
-	unsigned long min_host_addr;
-	struct resource *res;
-
-	/*
-	 * openbios puts some graphics cards in the same range as the host
-	 * controller uses to map to SDRAM.  Fix it.
-	 */
-
-	min_host_addr = 0;
-	max_host_addr = PPC405_PCI_MEM_BASE - 1;
-
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		res = dev->resource + i;
-		if (!res->start)
-			continue;
-		if ((res->flags & IORESOURCE_MEM) &&
-		    (((res->start >= min_host_addr)
-		      && (res->start <= max_host_addr))
-		     || ((res->end >= min_host_addr)
-			 && (res->end <= max_host_addr))
-		     || ((res->start < min_host_addr)
-			 && (res->end > max_host_addr))
-		    )
-		    ) {
-
-			/* force pcibios_assign_resources() to assign a new address */
-			res->end -= res->start;
-			res->start = 0;
-		}
-	}
-}
-
-static int
-ppc4xx_exclude_device(unsigned char bus, unsigned char devfn)
-{
-	/* We prevent us from seeing ourselves to avoid having
-	 * the kernel try to remap our BAR #1 and fuck up bus
-	 * master from external PCI devices
-	 */
-	return (bus == 0 && devfn == 0);
-}
-
-void
-ppc4xx_find_bridges(void)
-{
-	struct pci_controller *hose_a;
-	struct pcil0_regs *pcip;
-	unsigned int tmp_addr;
-	unsigned int tmp_size;
-	unsigned int reg_index;
-	unsigned int new_pmm_max = 0;
-	unsigned int new_pmm_min = 0;
-
-	isa_io_base = 0;
-	isa_mem_base = 0;
-	pci_dram_offset = 0;
-
-	/* Setup PCI32 hose */
-	hose_a = pcibios_alloc_controller();
-	if (!hose_a)
-		return;
-	setup_indirect_pci(hose_a, PPC405_PCI_CONFIG_ADDR,
-			   PPC405_PCI_CONFIG_DATA);
-
-	pcip = ioremap(PPC4xx_PCI_LCFG_PADDR, PAGE_SIZE);
-	if (pcip != NULL) {
-
-#if defined(CONFIG_BIOS_FIXUP)
-		bios_fixup(hose_a, pcip);
-#endif
-		new_pmm_min = 0xffffffff;
-		for (reg_index = 0; reg_index < 3; reg_index++) {
-			tmp_size = in_le32(&pcip->pmm[reg_index].ma);	// mask & attrs
-			/* test the enable bit */
-			if ((tmp_size & 0x1) == 0)
-				continue;
-			tmp_addr = in_le32(&pcip->pmm[reg_index].pcila);	// PCI addr
-			if (tmp_addr < PPC405_PCI_PHY_MEM_BASE) {
-				printk(KERN_DEBUG
-				       "Disabling mapping to PCI mem addr 0x%8.8x\n",
-				       tmp_addr);
-				out_le32(&pcip->pmm[reg_index].ma, tmp_size & ~1);	// *_PMMOMA
-				continue;
-			}
-			tmp_addr = in_le32(&pcip->pmm[reg_index].la);	// *_PMMOLA
-			if (tmp_addr < new_pmm_min)
-				new_pmm_min = tmp_addr;
-			tmp_addr = tmp_addr +
-				(0xffffffff - (tmp_size & 0xffffc000));
-			if (tmp_addr > PPC405_PCI_UPPER_MEM) {
-				new_pmm_max = tmp_addr;	// PPC405_PCI_UPPER_MEM
-			} else {
-				new_pmm_max = PPC405_PCI_UPPER_MEM;
-			}
-
-		}		// for
-
-		iounmap(pcip);
-	}
-
-	hose_a->first_busno = 0;
-	hose_a->last_busno = 0xff;
-	hose_a->pci_mem_offset = 0;
-
-	/* Setup bridge memory/IO ranges & resources
-	 * TODO: Handle firmware setting up a legacy ISA mem base
-	 */
-	hose_a->io_space.start = PPC405_PCI_LOWER_IO;
-	hose_a->io_space.end = PPC405_PCI_UPPER_IO;
-	hose_a->mem_space.start = new_pmm_min;
-	hose_a->mem_space.end = new_pmm_max;
-	hose_a->io_base_phys = PPC405_PCI_PHY_IO_BASE;
-	hose_a->io_base_virt = ioremap(hose_a->io_base_phys, 0x10000);
-	hose_a->io_resource.start = 0;
-	hose_a->io_resource.end = PPC405_PCI_UPPER_IO - PPC405_PCI_LOWER_IO;
-	hose_a->io_resource.flags = IORESOURCE_IO;
-	hose_a->io_resource.name = "PCI I/O";
-	hose_a->mem_resources[0].start = new_pmm_min;
-	hose_a->mem_resources[0].end = new_pmm_max;
-	hose_a->mem_resources[0].flags = IORESOURCE_MEM;
-	hose_a->mem_resources[0].name = "PCI Memory";
-	isa_io_base = (int) hose_a->io_base_virt;
-	isa_mem_base = 0;	/*     ISA not implemented */
-	ISA_DMA_THRESHOLD = 0x00ffffff;	/* ??? ISA not implemented */
-
-	/* Scan busses & initial setup by pci_auto */
-	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
-	hose_a->last_busno = 0;
-
-	/* Setup ppc_md */
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pci_exclude_device = ppc4xx_exclude_device;
-	ppc_md.pcibios_fixup_resources = ppc405_pcibios_fixup_resources;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ppc405_map_irq;
-}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c
deleted file mode 100644
index dd5d4b958c31..000000000000
--- a/arch/ppc/syslib/ppc440spe_pcie.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/reg.h>
-#include <asm/io.h>
-#include <asm/ibm44x.h>
-
-#include "ppc440spe_pcie.h"
-
-static int
-pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	if (PCI_SLOT(devfn) != 1)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	offset += devfn << 12;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	switch (len) {
-	case 1:
-		*val = in_8(hose->cfg_data + offset);
-		break;
-	case 2:
-		*val = in_le16(hose->cfg_data + offset);
-		break;
-	default:
-		*val = in_le32(hose->cfg_data + offset);
-		break;
-	}
-
-	if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	if (PCI_SLOT(devfn) != 1)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	offset += devfn << 12;
-
-	switch (len) {
-	case 1:
-		out_8(hose->cfg_data + offset, val);
-		break;
-	case 2:
-		out_le16(hose->cfg_data + offset, val);
-		break;
-	default:
-		out_le32(hose->cfg_data + offset, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pcie_pci_ops =
-{
-	.read  = pcie_read_config,
-	.write = pcie_write_config
-};
-
-enum {
-	PTYPE_ENDPOINT		= 0x0,
-	PTYPE_LEGACY_ENDPOINT	= 0x1,
-	PTYPE_ROOT_PORT		= 0x4,
-
-	LNKW_X1			= 0x1,
-	LNKW_X4			= 0x4,
-	LNKW_X8			= 0x8
-};
-
-static void check_error(void)
-{
-	u32 valPE0, valPE1, valPE2;
-
-	/* SDR0_PEGPLLLCT1 reset */
-	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
-		printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
-	}
-
-	valPE0 = SDR_READ(PESDR0_RCSSET);
-	valPE1 = SDR_READ(PESDR1_RCSSET);
-	valPE2 = SDR_READ(PESDR2_RCSSET);
-
-	/* SDR0_PExRCSSET rstgu */
-	if ( !(valPE0 & 0x01000000) ||
-	     !(valPE1 & 0x01000000) ||
-	     !(valPE2 & 0x01000000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstgu error\n");
-	}
-
-	/* SDR0_PExRCSSET rstdl */
-	if ( !(valPE0 & 0x00010000) ||
-	     !(valPE1 & 0x00010000) ||
-	     !(valPE2 & 0x00010000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstdl error\n");
-	}
-
-	/* SDR0_PExRCSSET rstpyn */
-	if ( (valPE0 & 0x00001000) ||
-	     (valPE1 & 0x00001000) ||
-	     (valPE2 & 0x00001000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstpyn error\n");
-	}
-
-	/* SDR0_PExRCSSET hldplb */
-	if ( (valPE0 & 0x10000000) ||
-	     (valPE1 & 0x10000000) ||
-	     (valPE2 & 0x10000000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET hldplb error\n");
-	}
-
-	/* SDR0_PExRCSSET rdy */
-	if ( (valPE0 & 0x00100000) ||
-	     (valPE1 & 0x00100000) ||
-	     (valPE2 & 0x00100000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rdy error\n");
-	}
-
-	/* SDR0_PExRCSSET shutdown */
-	if ( (valPE0 & 0x00000100) ||
-	     (valPE1 & 0x00000100) ||
-	     (valPE2 & 0x00000100)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET shutdown error\n");
-	}
-}
-
-/*
- * Initialize PCI Express core as described in User Manual section 27.12.1
- */
-int ppc440spe_init_pcie(void)
-{
-	/* Set PLL clock receiver to LVPECL */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
-
-	check_error();
-
-	printk(KERN_INFO "PCIE initialization OK\n");
-
-	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
-		printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
-		       SDR_READ(PESDR0_PLLLCT2));
-
-	/* De-assert reset of PCIe PLL, wait for lock */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
-	udelay(3);
-
-	return 0;
-}
-
-int ppc440spe_init_pcie_rootport(int port)
-{
-	static int core_init;
-	void __iomem *utl_base;
-	u32 val = 0;
-	int i;
-
-	if (!core_init) {
-		++core_init;
-		i = ppc440spe_init_pcie();
-		if (i)
-			return i;
-	}
-
-	/*
-	 * Initialize various parts of the PCI Express core for our port:
-	 *
-	 * - Set as a root port and enable max width
-	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
-	 * - Set up UTL configuration.
-	 * - Increase SERDES drive strength to levels suggested by AMCC.
-	 * - De-assert RSTPYN, RSTDL and RSTGU.
-	 */
-	switch (port) {
-	case 0:
-		SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
-
-		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
-
-		SDR_WRITE(PESDR0_RCSSET,
-			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 1:
-		SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-
-		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
-
-		SDR_WRITE(PESDR1_RCSSET,
-			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 2:
-		SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-
-		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
-
-		SDR_WRITE(PESDR2_RCSSET,
-			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-	}
-
-	mdelay(1000);
-
-	switch (port) {
-	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
-	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
-	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
-	}
-
-	if (!(val & (1 << 20)))
-		printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
-	else
-		printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
-
-	switch (port) {
-	case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
-	case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
-	case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
-	}
-
-	/*
-	 * Map UTL registers at 0xc_1000_0n00
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
-		break;
-
-	case 2:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
-	}
-
-	utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
-
-	/*
-	 * Set buffer allocations and then assert VRB and TXE.
-	 */
-	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
-	out_be32(utl_base + PEUTL_INTR,    0x02000000);
-	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
-	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
-	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
-	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
-
-	iounmap(utl_base);
-
-	/*
-	 * We map PCI Express configuration access into the 512MB regions
-	 *     PCIE0: 0xc_4000_0000
-	 *     PCIE1: 0xc_8000_0000
-	 *     PCIE2: 0xc_c000_0000
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 2:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
-		break;
-	}
-
-	/*
-	 * Check for VC0 active and assert RDY.
-	 */
-	switch (port) {
-	case 0:
-		if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
-		break;
-	case 1:
-		if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
-		break;
-	case 2:
-		if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
-		break;
-	}
-
-#if 0
-	/* Dump all config regs */
-	for (i = 0x300; i <= 0x320; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x340; i <= 0x353; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x370; i <= 0x383; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x3a0; i <= 0x3a2; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x3c0; i <= 0x3c3; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-#endif
-
-	mdelay(100);
-
-	return 0;
-}
-
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
-{
-	void __iomem *mbase;
-
-	/*
-	 * Map 16MB, which is enough for 4 bits of bus #
-	 */
-	hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
-				   1 << 24);
-	hose->ops = &pcie_pci_ops;
-
-	/*
-	 * Set bus numbers on our root port
-	 */
-	mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
-	out_8(mbase + PCI_PRIMARY_BUS, 0);
-	out_8(mbase + PCI_SECONDARY_BUS, 0);
-
-	/*
-	 * Set up outbound translation to hose->mem_space from PLB
-	 * addresses at an offset of 0xd_0000_0000.  We set the low
-	 * bits of the mask to 11 to turn off splitting into 8
-	 * subregions and to enable the outbound translation.
-	 */
-	out_le32(mbase + PECFG_POM0LAH, 0);
-	out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
-
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-		break;
-	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-
-		break;
-	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-		break;
-	}
-
-	/* Set up 16GB inbound memory window at 0 */
-	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
-	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
-	out_le32(mbase + PECFG_BAR0LMPA, 0);
-	out_le32(mbase + PECFG_PIM0LAL, 0);
-	out_le32(mbase + PECFG_PIM0LAH, 0);
-	out_le32(mbase + PECFG_PIMEN, 0x1);
-
-	/* Enable I/O, Mem, and Busmaster cycles */
-	out_le16(mbase + PCI_COMMAND,
-		 in_le16(mbase + PCI_COMMAND) |
-		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
-	iounmap(mbase);
-}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h
deleted file mode 100644
index 55b765ad3272..000000000000
--- a/arch/ppc/syslib/ppc440spe_pcie.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H
-#define __PPC_SYSLIB_PPC440SPE_PCIE_H
-
-#define DCRN_SDR0_CFGADDR	0x00e
-#define DCRN_SDR0_CFGDATA	0x00f
-
-#define DCRN_PCIE0_BASE		0x100
-#define DCRN_PCIE1_BASE		0x120
-#define DCRN_PCIE2_BASE		0x140
-#define PCIE0			DCRN_PCIE0_BASE
-#define PCIE1			DCRN_PCIE1_BASE
-#define PCIE2			DCRN_PCIE2_BASE
-
-#define DCRN_PEGPL_CFGBAH(base)		(base + 0x00)
-#define DCRN_PEGPL_CFGBAL(base)		(base + 0x01)
-#define DCRN_PEGPL_CFGMSK(base)		(base + 0x02)
-#define DCRN_PEGPL_MSGBAH(base)		(base + 0x03)
-#define DCRN_PEGPL_MSGBAL(base)		(base + 0x04)
-#define DCRN_PEGPL_MSGMSK(base)		(base + 0x05)
-#define DCRN_PEGPL_OMR1BAH(base)	(base + 0x06)
-#define DCRN_PEGPL_OMR1BAL(base)	(base + 0x07)
-#define DCRN_PEGPL_OMR1MSKH(base)	(base + 0x08)
-#define DCRN_PEGPL_OMR1MSKL(base)	(base + 0x09)
-#define DCRN_PEGPL_REGBAH(base)		(base + 0x12)
-#define DCRN_PEGPL_REGBAL(base)		(base + 0x13)
-#define DCRN_PEGPL_REGMSK(base)		(base + 0x14)
-#define DCRN_PEGPL_SPECIAL(base)	(base + 0x15)
-
-/*
- * System DCRs (SDRs)
- */
-#define PESDR0_PLLLCT1		0x03a0
-#define PESDR0_PLLLCT2		0x03a1
-#define PESDR0_PLLLCT3		0x03a2
-
-#define PESDR0_UTLSET1		0x0300
-#define PESDR0_UTLSET2		0x0301
-#define PESDR0_DLPSET		0x0302
-#define PESDR0_LOOP		0x0303
-#define PESDR0_RCSSET		0x0304
-#define PESDR0_RCSSTS		0x0305
-#define PESDR0_HSSL0SET1	0x0306
-#define PESDR0_HSSL0SET2	0x0307
-#define PESDR0_HSSL0STS		0x0308
-#define PESDR0_HSSL1SET1	0x0309
-#define PESDR0_HSSL1SET2	0x030a
-#define PESDR0_HSSL1STS		0x030b
-#define PESDR0_HSSL2SET1	0x030c
-#define PESDR0_HSSL2SET2	0x030d
-#define PESDR0_HSSL2STS		0x030e
-#define PESDR0_HSSL3SET1	0x030f
-#define PESDR0_HSSL3SET2	0x0310
-#define PESDR0_HSSL3STS		0x0311
-#define PESDR0_HSSL4SET1	0x0312
-#define PESDR0_HSSL4SET2	0x0313
-#define PESDR0_HSSL4STS		0x0314
-#define PESDR0_HSSL5SET1	0x0315
-#define PESDR0_HSSL5SET2	0x0316
-#define PESDR0_HSSL5STS		0x0317
-#define PESDR0_HSSL6SET1	0x0318
-#define PESDR0_HSSL6SET2	0x0319
-#define PESDR0_HSSL6STS		0x031a
-#define PESDR0_HSSL7SET1	0x031b
-#define PESDR0_HSSL7SET2	0x031c
-#define PESDR0_HSSL7STS		0x031d
-#define PESDR0_HSSCTLSET	0x031e
-#define PESDR0_LANE_ABCD	0x031f
-#define PESDR0_LANE_EFGH	0x0320
-
-#define PESDR1_UTLSET1		0x0340
-#define PESDR1_UTLSET2		0x0341
-#define PESDR1_DLPSET		0x0342
-#define PESDR1_LOOP		0x0343
-#define PESDR1_RCSSET		0x0344
-#define PESDR1_RCSSTS		0x0345
-#define PESDR1_HSSL0SET1	0x0346
-#define PESDR1_HSSL0SET2	0x0347
-#define PESDR1_HSSL0STS		0x0348
-#define PESDR1_HSSL1SET1	0x0349
-#define PESDR1_HSSL1SET2	0x034a
-#define PESDR1_HSSL1STS		0x034b
-#define PESDR1_HSSL2SET1	0x034c
-#define PESDR1_HSSL2SET2	0x034d
-#define PESDR1_HSSL2STS		0x034e
-#define PESDR1_HSSL3SET1	0x034f
-#define PESDR1_HSSL3SET2	0x0350
-#define PESDR1_HSSL3STS		0x0351
-#define PESDR1_HSSCTLSET	0x0352
-#define PESDR1_LANE_ABCD	0x0353
-
-#define PESDR2_UTLSET1		0x0370
-#define PESDR2_UTLSET2		0x0371
-#define PESDR2_DLPSET		0x0372
-#define PESDR2_LOOP		0x0373
-#define PESDR2_RCSSET		0x0374
-#define PESDR2_RCSSTS		0x0375
-#define PESDR2_HSSL0SET1	0x0376
-#define PESDR2_HSSL0SET2	0x0377
-#define PESDR2_HSSL0STS		0x0378
-#define PESDR2_HSSL1SET1	0x0379
-#define PESDR2_HSSL1SET2	0x037a
-#define PESDR2_HSSL1STS		0x037b
-#define PESDR2_HSSL2SET1	0x037c
-#define PESDR2_HSSL2SET2	0x037d
-#define PESDR2_HSSL2STS		0x037e
-#define PESDR2_HSSL3SET1	0x037f
-#define PESDR2_HSSL3SET2	0x0380
-#define PESDR2_HSSL3STS		0x0381
-#define PESDR2_HSSCTLSET	0x0382
-#define PESDR2_LANE_ABCD	0x0383
-
-/*
- * UTL register offsets
- */
-#define PEUTL_PBBSZ		0x20
-#define PEUTL_OPDBSZ		0x68
-#define PEUTL_IPHBSZ		0x70
-#define PEUTL_IPDBSZ		0x78
-#define PEUTL_OUTTR		0x90
-#define PEUTL_INTR		0x98
-#define PEUTL_PCTL		0xa0
-#define PEUTL_RCIRQEN		0xb8
-
-/*
- * Config space register offsets
- */
-#define PECFG_BAR0LMPA		0x210
-#define PECFG_BAR0HMPA		0x214
-#define PECFG_PIMEN		0x33c
-#define PECFG_PIM0LAL		0x340
-#define PECFG_PIM0LAH		0x344
-#define PECFG_POM0LAL		0x380
-#define PECFG_POM0LAH		0x384
-
-int ppc440spe_init_pcie(void);
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
-#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */
diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c
deleted file mode 100644
index bd301868996b..000000000000
--- a/arch/ppc/syslib/ppc4xx_dma.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- * IBM PPC4xx DMA engine core library
- *
- * Copyright 2000-2004 MontaVista Software Inc.
- *
- * Cleaned up and converted to new DCR access
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/ppc4xx_dma.h>
-
-ppc_dma_ch_t dma_channels[MAX_PPC4xx_DMA_CHANNELS];
-
-int
-ppc4xx_get_dma_status(void)
-{
-	return (mfdcr(DCRN_DMASR));
-}
-
-void
-ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_src_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_DMASAH0 + dmanr*2, (u32)(src_addr >> 32));
-#else
-	mtdcr(DCRN_DMASA0 + dmanr*2, (u32)src_addr);
-#endif
-}
-
-void
-ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_dst_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_DMADAH0 + dmanr*2, (u32)(dst_addr >> 32));
-#else
-	mtdcr(DCRN_DMADA0 + dmanr*2, (u32)dst_addr);
-#endif
-}
-
-void
-ppc4xx_enable_dma(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-	unsigned int status_bits[] = { DMA_CS0 | DMA_TS0 | DMA_CH0_ERR,
-				       DMA_CS1 | DMA_TS1 | DMA_CH1_ERR,
-				       DMA_CS2 | DMA_TS2 | DMA_CH2_ERR,
-				       DMA_CS3 | DMA_TS3 | DMA_CH3_ERR};
-
-	if (p_dma_ch->in_use) {
-		printk("enable_dma: channel %d in use\n", dmanr);
-		return;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("enable_dma: bad channel: %d\n", dmanr);
-		return;
-	}
-
-	if (p_dma_ch->mode == DMA_MODE_READ) {
-		/* peripheral to memory */
-		ppc4xx_set_src_addr(dmanr, 0);
-		ppc4xx_set_dst_addr(dmanr, p_dma_ch->addr);
-	} else if (p_dma_ch->mode == DMA_MODE_WRITE) {
-		/* memory to peripheral */
-		ppc4xx_set_src_addr(dmanr, p_dma_ch->addr);
-		ppc4xx_set_dst_addr(dmanr, 0);
-	}
-
-	/* for other xfer modes, the addresses are already set */
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	control &= ~(DMA_TM_MASK | DMA_TD);	/* clear all mode bits */
-	if (p_dma_ch->mode == DMA_MODE_MM) {
-		/* software initiated memory to memory */
-		control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
-	}
-
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	/*
-	 * Clear the CS, TS, RI bits for the channel from DMASR.  This
-	 * has been observed to happen correctly only after the mode and
-	 * ETD/DCE bits in DMACRx are set above.  Must do this before
-	 * enabling the channel.
-	 */
-
-	mtdcr(DCRN_DMASR, status_bits[dmanr]);
-
-	/*
-	 * For device-paced transfers, Terminal Count Enable apparently
-	 * must be on, and this must be turned on after the mode, etc.
-	 * bits are cleared above (at least on Redwood-6).
-	 */
-
-	if ((p_dma_ch->mode == DMA_MODE_MM_DEVATDST) ||
-	    (p_dma_ch->mode == DMA_MODE_MM_DEVATSRC))
-		control |= DMA_TCE_ENABLE;
-
-	/*
-	 * Now enable the channel.
-	 */
-
-	control |= (p_dma_ch->mode | DMA_CE_ENABLE);
-
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	p_dma_ch->in_use = 1;
-}
-
-void
-ppc4xx_disable_dma(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (!p_dma_ch->in_use) {
-		printk("disable_dma: channel %d not in use\n", dmanr);
-		return;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("disable_dma: bad channel: %d\n", dmanr);
-		return;
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control &= ~DMA_CE_ENABLE;
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	p_dma_ch->in_use = 0;
-}
-
-/*
- * Sets the dma mode for single DMA transfers only.
- * For scatter/gather transfers, the mode is passed to the
- * alloc_dma_handle() function as one of the parameters.
- *
- * The mode is simply saved and used later.  This allows
- * the driver to call set_dma_mode() and set_dma_addr() in
- * any order.
- *
- * Valid mode values are:
- *
- * DMA_MODE_READ          peripheral to memory
- * DMA_MODE_WRITE         memory to peripheral
- * DMA_MODE_MM            memory to memory
- * DMA_MODE_MM_DEVATSRC   device-paced memory to memory, device at src
- * DMA_MODE_MM_DEVATDST   device-paced memory to memory, device at dst
- */
-int
-ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_dma_mode: bad channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->mode = mode;
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the DMA Count register. Note that 'count' is in bytes.
- * However, the DMA Count register counts the number of "transfers",
- * where each transfer is equal to the bus width.  Thus, count
- * MUST be a multiple of the bus width.
- */
-void
-ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if (count & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if (count & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if (count & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("set_dma_count: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return;
-		}
-		if (error)
-			printk
-			    ("Warning: set_dma_count count 0x%x bus width %d\n",
-			     count, p_dma_ch->pwidth);
-	}
-#endif
-
-	count = count >> p_dma_ch->shift;
-
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), count);
-}
-
-/*
- *   Returns the number of bytes left to be transferred.
- *   After a DMA transfer, this should return zero.
- *   Reading this while a DMA transfer is still in progress will return
- *   unpredictable results.
- */
-int
-ppc4xx_get_dma_residue(unsigned int dmanr)
-{
-	unsigned int count;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_dma_residue: bad channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	count = mfdcr(DCRN_DMACT0 + (dmanr * 0x8));
-
-	return (count << p_dma_ch->shift);
-}
-
-/*
- * Sets the DMA address for a memory to peripheral or peripheral
- * to memory transfer.  The address is just saved in the channel
- * structure for now and used later in enable_dma().
- */
-void
-ppc4xx_set_dma_addr(unsigned int dmanr, phys_addr_t addr)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_dma_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if ((unsigned) addr & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if ((unsigned) addr & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if ((unsigned) addr & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("ppc4xx_set_dma_addr: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return;
-		}
-		if (error)
-			printk("Warning: ppc4xx_set_dma_addr addr 0x%x bus width %d\n",
-			       addr, p_dma_ch->pwidth);
-	}
-#endif
-
-	/* save dma address and program it later after we know the xfer mode */
-	p_dma_ch->addr = addr;
-}
-
-/*
- * Sets both DMA addresses for a memory to memory transfer.
- * For memory to peripheral or peripheral to memory transfers
- * the function set_dma_addr() should be used instead.
- */
-void
-ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
-		     phys_addr_t dst_dma_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_dma_addr2: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef DEBUG_4xxDMA
-	{
-		ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-			case PW_8:
-				break;
-			case PW_16:
-				if (((unsigned) src_dma_addr & 0x1) ||
-						((unsigned) dst_dma_addr & 0x1)
-				   )
-					error = 1;
-				break;
-			case PW_32:
-				if (((unsigned) src_dma_addr & 0x3) ||
-						((unsigned) dst_dma_addr & 0x3)
-				   )
-					error = 1;
-				break;
-			case PW_64:
-				if (((unsigned) src_dma_addr & 0x7) ||
-						((unsigned) dst_dma_addr & 0x7)
-				   )
-					error = 1;
-				break;
-			default:
-				printk("ppc4xx_set_dma_addr2: invalid bus width: 0x%x\n",
-						p_dma_ch->pwidth);
-				return;
-		}
-		if (error)
-			printk
-				("Warning: ppc4xx_set_dma_addr2 src 0x%x dst 0x%x bus width %d\n",
-				 src_dma_addr, dst_dma_addr, p_dma_ch->pwidth);
-	}
-#endif
-
-	ppc4xx_set_src_addr(dmanr, src_dma_addr);
-	ppc4xx_set_dst_addr(dmanr, dst_dma_addr);
-}
-
-/*
- * Enables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list.  Otherwise, interrupts will not be enabled, if
- * they were previously disabled.
- */
-int
-ppc4xx_enable_dma_interrupt(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_enable_dma_interrupt: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->int_enable = 1;
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control |= DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Disables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list.  Otherwise, interrupts will not be disabled, if
- * they were previously enabled.
- */
-int
-ppc4xx_disable_dma_interrupt(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_disable_dma_interrupt: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->int_enable = 0;
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control &= ~DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Configures a DMA channel, including the peripheral bus width, if a
- * peripheral is attached to the channel, the polarity of the DMAReq and
- * DMAAck signals, etc.  This information should really be setup by the boot
- * code, since most likely the configuration won't change dynamically.
- * If the kernel has to call this function, it's recommended that it's
- * called from platform specific init code.  The driver should not need to
- * call this function.
- */
-int
-ppc4xx_init_dma_channel(unsigned int dmanr, ppc_dma_ch_t * p_init)
-{
-	unsigned int polarity;
-	uint32_t control = 0;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	DMA_MODE_READ = (unsigned long) DMA_TD;	/* Peripheral to Memory */
-	DMA_MODE_WRITE = 0;	/* Memory to Peripheral */
-
-	if (!p_init) {
-		printk("ppc4xx_init_dma_channel: NULL p_init\n");
-		return DMA_STATUS_NULL_POINTER;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_init_dma_channel: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-#if DCRN_POL > 0
-	polarity = mfdcr(DCRN_POL);
-#else
-	polarity = 0;
-#endif
-
-	/* Setup the control register based on the values passed to
-	 * us in p_init.  Then, over-write the control register with this
-	 * new value.
-	 */
-	control |= SET_DMA_CONTROL;
-
-	/* clear all polarity signals and then "or" in new signal levels */
-	polarity &= ~GET_DMA_POLARITY(dmanr);
-	polarity |= p_init->polarity;
-#if DCRN_POL > 0
-	mtdcr(DCRN_POL, polarity);
-#endif
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	/* save these values in our dma channel structure */
-	memcpy(p_dma_ch, p_init, sizeof (ppc_dma_ch_t));
-
-	/*
-	 * The peripheral width values written in the control register are:
-	 *   PW_8                 0
-	 *   PW_16                1
-	 *   PW_32                2
-	 *   PW_64                3
-	 *
-	 *   Since the DMA count register takes the number of "transfers",
-	 *   we need to divide the count sent to us in certain
-	 *   functions by the appropriate number.  It so happens that our
-	 *   right shift value is equal to the peripheral width value.
-	 */
-	p_dma_ch->shift = p_init->pwidth;
-
-	/*
-	 * Save the control word for easy access.
-	 */
-	p_dma_ch->control = control;
-
-	mtdcr(DCRN_DMASR, 0xffffffff);	/* clear status register */
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * This function returns the channel configuration.
- */
-int
-ppc4xx_get_channel_config(unsigned int dmanr, ppc_dma_ch_t * p_dma_ch)
-{
-	unsigned int polarity;
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_channel_config: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	memcpy(p_dma_ch, &dma_channels[dmanr], sizeof (ppc_dma_ch_t));
-
-#if DCRN_POL > 0
-	polarity = mfdcr(DCRN_POL);
-#else
-	polarity = 0;
-#endif
-
-	p_dma_ch->polarity = polarity & GET_DMA_POLARITY(dmanr);
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	p_dma_ch->cp = GET_DMA_PRIORITY(control);
-	p_dma_ch->pwidth = GET_DMA_PW(control);
-	p_dma_ch->psc = GET_DMA_PSC(control);
-	p_dma_ch->pwc = GET_DMA_PWC(control);
-	p_dma_ch->phc = GET_DMA_PHC(control);
-	p_dma_ch->ce = GET_DMA_CE_ENABLE(control);
-	p_dma_ch->int_enable = GET_DMA_CIE_ENABLE(control);
-	p_dma_ch->shift = GET_DMA_PW(control);
-
-#ifdef CONFIG_PPC4xx_EDMA
-	p_dma_ch->pf = GET_DMA_PREFETCH(control);
-#else
-	p_dma_ch->ch_enable = GET_DMA_CH(control);
-	p_dma_ch->ece_enable = GET_DMA_ECE(control);
-	p_dma_ch->tcd_disable = GET_DMA_TCD(control);
-#endif
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the priority for the DMA channel dmanr.
- * Since this is setup by the hardware init function, this function
- * can be used to dynamically change the priority of a channel.
- *
- * Acceptable priorities:
- *
- * PRIORITY_LOW
- * PRIORITY_MID_LOW
- * PRIORITY_MID_HIGH
- * PRIORITY_HIGH
- *
- */
-int
-ppc4xx_set_channel_priority(unsigned int dmanr, unsigned int priority)
-{
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_channel_priority: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if ((priority != PRIORITY_LOW) &&
-	    (priority != PRIORITY_MID_LOW) &&
-	    (priority != PRIORITY_MID_HIGH) && (priority != PRIORITY_HIGH)) {
-		printk("ppc4xx_set_channel_priority: bad priority: 0x%x\n", priority);
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control |= SET_DMA_PRIORITY(priority);
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Returns the width of the peripheral attached to this channel. This assumes
- * that someone who knows the hardware configuration, boot code or some other
- * init code, already set the width.
- *
- * The return value is one of:
- *   PW_8
- *   PW_16
- *   PW_32
- *   PW_64
- *
- *   The function returns 0 on error.
- */
-unsigned int
-ppc4xx_get_peripheral_width(unsigned int dmanr)
-{
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_peripheral_width: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	return (GET_DMA_PW(control));
-}
-
-/*
- * Clears the channel status bits
- */
-int
-ppc4xx_clr_dma_status(unsigned int dmanr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_clr_dma_status: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	mtdcr(DCRN_DMASR, ((u32)DMA_CH0_ERR | (u32)DMA_CS0 | (u32)DMA_TS0) >> dmanr);
-	return DMA_STATUS_GOOD;
-}
-
-#ifdef CONFIG_PPC4xx_EDMA
-/*
- * Enables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_enable_burst(unsigned int dmanr)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_enable_burst: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-        ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) | DMA_CTC_BTEN;
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-/*
- * Disables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_disable_burst(unsigned int dmanr)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_disable_burst: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BTEN;
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-/*
- * Sets the burst size (number of peripheral widths) for the channel
- * (BSIZ bits in the control/count register))
- * must be one of:
- *    DMA_CTC_BSIZ_2
- *    DMA_CTC_BSIZ_4
- *    DMA_CTC_BSIZ_8
- *    DMA_CTC_BSIZ_16
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_set_burst_size: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BSIZ_MSK;
-	ctc |= (bsize & DMA_CTC_BSIZ_MSK);
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-
-EXPORT_SYMBOL(ppc4xx_enable_burst);
-EXPORT_SYMBOL(ppc4xx_disable_burst);
-EXPORT_SYMBOL(ppc4xx_set_burst_size);
-#endif /* CONFIG_PPC4xx_EDMA */
-
-EXPORT_SYMBOL(ppc4xx_init_dma_channel);
-EXPORT_SYMBOL(ppc4xx_get_channel_config);
-EXPORT_SYMBOL(ppc4xx_set_channel_priority);
-EXPORT_SYMBOL(ppc4xx_get_peripheral_width);
-EXPORT_SYMBOL(dma_channels);
-EXPORT_SYMBOL(ppc4xx_set_src_addr);
-EXPORT_SYMBOL(ppc4xx_set_dst_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr2);
-EXPORT_SYMBOL(ppc4xx_enable_dma);
-EXPORT_SYMBOL(ppc4xx_disable_dma);
-EXPORT_SYMBOL(ppc4xx_set_dma_mode);
-EXPORT_SYMBOL(ppc4xx_set_dma_count);
-EXPORT_SYMBOL(ppc4xx_get_dma_residue);
-EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_get_dma_status);
-EXPORT_SYMBOL(ppc4xx_clr_dma_status);
-
diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c
deleted file mode 100644
index ee0da4b4b993..000000000000
--- a/arch/ppc/syslib/ppc4xx_pic.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Interrupt controller driver for PowerPC 4xx-based processors.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2004, 2005 Zultys Technologies
- *
- * Based on original code by
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *    Armin Custer <akuster@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
-*/
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/stddef.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/machdep.h>
-
-/* See comment in include/arch-ppc/ppc4xx_pic.h
- * for more info about these two variables
- */
-extern struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[NR_UICS]
-    __attribute__ ((weak));
-extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak));
-
-#define IRQ_MASK_UIC0(irq)		(1 << (31 - (irq)))
-#define IRQ_MASK_UICx(irq)		(1 << (31 - ((irq) & 0x1f)))
-#define IRQ_MASK_UIC1(irq)		IRQ_MASK_UICx(irq)
-#define IRQ_MASK_UIC2(irq)		IRQ_MASK_UICx(irq)
-#define IRQ_MASK_UIC3(irq)		IRQ_MASK_UICx(irq)
-
-#define UIC_HANDLERS(n)							\
-static void ppc4xx_uic##n##_enable(unsigned int irq)			\
-{									\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	if (irq_desc[irq].status & IRQ_LEVEL)				\
-		mtdcr(DCRN_UIC_SR(UIC##n), mask);			\
-	ppc_cached_irq_mask[n] |= mask;					\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-}									\
-									\
-static void ppc4xx_uic##n##_disable(unsigned int irq)			\
-{									\
-	ppc_cached_irq_mask[n] &= ~IRQ_MASK_UIC##n(irq);		\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-	ACK_UIC##n##_PARENT						\
-}									\
-									\
-static void ppc4xx_uic##n##_ack(unsigned int irq)			\
-{									\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	ppc_cached_irq_mask[n] &= ~mask;				\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-	mtdcr(DCRN_UIC_SR(UIC##n), mask);				\
-	ACK_UIC##n##_PARENT						\
-}									\
-									\
-static void ppc4xx_uic##n##_end(unsigned int irq)			\
-{									\
-	unsigned int status = irq_desc[irq].status;			\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	if (status & IRQ_LEVEL) {					\
-		mtdcr(DCRN_UIC_SR(UIC##n), mask);			\
-		ACK_UIC##n##_PARENT					\
-	}								\
-	if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) {		\
-		ppc_cached_irq_mask[n] |= mask;				\
-		mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);	\
-	}								\
-}
-
-#define DECLARE_UIC(n)							\
-{									\
-	.typename 	= "UIC"#n,					\
-	.enable 	= ppc4xx_uic##n##_enable,			\
-	.disable 	= ppc4xx_uic##n##_disable,			\
-	.ack 		= ppc4xx_uic##n##_ack,				\
-	.end 		= ppc4xx_uic##n##_end,				\
-}									\
-
-#if NR_UICS == 4
-#define ACK_UIC0_PARENT
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC);
-#define ACK_UIC3_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-UIC_HANDLERS(2);
-UIC_HANDLERS(3);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	if (uic0 & UIC0_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else if (uic0 & UIC0_UIC2NC)
-		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
-	else if (uic0 & UIC0_UIC3NC)
-		return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3)));
-	else
-		return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-	/* Enable cascade interrupts in UIC0 */
-	ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC;
-	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC);
-	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
-}
-
-#elif NR_UICS == 3
-#define ACK_UIC0_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
-#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-UIC_HANDLERS(2);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uicb = mfdcr(DCRN_UIC_MSR(UICB));
-	if (uicb & UICB_UIC0NC)
-		return 32 - ffs(mfdcr(DCRN_UIC_MSR(UIC0)));
-	else if (uicb & UICB_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else if (uicb & UICB_UIC2NC)
-		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
-	else
-		return -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-#if defined(CONFIG_440GX)
-	/* Disable 440GP compatibility mode if it was enabled in firmware */
-	SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~DCRN_SDR_MFR_PCM);
-#endif
-	/* Configure Base UIC */
-	mtdcr(DCRN_UIC_CR(UICB), 0);
-	mtdcr(DCRN_UIC_TR(UICB), 0);
-	mtdcr(DCRN_UIC_PR(UICB), 0xffffffff);
-	mtdcr(DCRN_UIC_SR(UICB), 0xffffffff);
-	mtdcr(DCRN_UIC_ER(UICB), UICB_UIC0NC | UICB_UIC1NC | UICB_UIC2NC);
-}
-
-#elif NR_UICS == 2
-#define ACK_UIC0_PARENT
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	if (uic0 & UIC0_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else
-		return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-	/* Enable cascade interrupt in UIC0 */
-	ppc_cached_irq_mask[0] |= UIC0_UIC1NC;
-	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
-}
-
-#elif NR_UICS == 1
-#define ACK_UIC0_PARENT
-UIC_HANDLERS(0);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static inline void ppc4xx_pic_impl_init(void)
-{
-}
-#endif
-
-static struct ppc4xx_uic_impl {
-	struct hw_interrupt_type decl;
-	int base;			/* Base DCR number */
-} __uic[] = {
-	{ .decl = DECLARE_UIC(0), .base = UIC0 },
-#if NR_UICS > 1
-	{ .decl = DECLARE_UIC(1), .base = UIC1 },
-#if NR_UICS > 2
-	{ .decl = DECLARE_UIC(2), .base = UIC2 },
-#if NR_UICS > 3
-	{ .decl = DECLARE_UIC(3), .base = UIC3 },
-#endif
-#endif
-#endif
-};
-
-static inline int is_level_sensitive(int irq)
-{
-	u32 tr = mfdcr(DCRN_UIC_TR(__uic[irq >> 5].base));
-	return (tr & IRQ_MASK_UICx(irq)) == 0;
-}
-
-void __init ppc4xx_pic_init(void)
-{
-	int i;
-	unsigned char *eirqs = ppc4xx_uic_ext_irq_cfg;
-
-	for (i = 0; i < NR_UICS; ++i) {
-		int base = __uic[i].base;
-
-		/* Disable everything by default */
-		ppc_cached_irq_mask[i] = 0;
-		mtdcr(DCRN_UIC_ER(base), 0);
-
-		/* We don't use critical interrupts */
-		mtdcr(DCRN_UIC_CR(base), 0);
-
-		/* Configure polarity and triggering */
-		if (ppc4xx_core_uic_cfg) {
-			struct ppc4xx_uic_settings *p = ppc4xx_core_uic_cfg + i;
-			u32 mask = p->ext_irq_mask;
-			u32 pr = mfdcr(DCRN_UIC_PR(base)) & mask;
-			u32 tr = mfdcr(DCRN_UIC_TR(base)) & mask;
-
-			/* "Fixed" interrupts (on-chip devices) */
-			pr |= p->polarity & ~mask;
-			tr |= p->triggering & ~mask;
-
-			/* Merge external IRQs settings if board port
-			 * provided them
-			 */
-			if (eirqs && mask) {
-				pr &= ~mask;
-				tr &= ~mask;
-				while (mask) {
-					/* Extract current external IRQ mask */
-					u32 eirq_mask = 1 << __ilog2(mask);
-
-					if (!(*eirqs & IRQ_SENSE_LEVEL))
-						tr |= eirq_mask;
-
-					if (*eirqs & IRQ_POLARITY_POSITIVE)
-						pr |= eirq_mask;
-
-					mask &= ~eirq_mask;
-					++eirqs;
-				}
-			}
-			mtdcr(DCRN_UIC_PR(base), pr);
-			mtdcr(DCRN_UIC_TR(base), tr);
-		}
-
-		/* ACK any pending interrupts to prevent false
-		 * triggering after first enable
-		 */
-		mtdcr(DCRN_UIC_SR(base), 0xffffffff);
-	}
-
-	/* Perform optional implementation specific setup
-	 * (e.g. enable cascade interrupts for multi-UIC configurations)
-	 */
-	ppc4xx_pic_impl_init();
-
-	/* Attach low-level handlers */
-	for (i = 0; i < (NR_UICS << 5); ++i) {
-		irq_desc[i].chip = &__uic[i >> 5].decl;
-		if (is_level_sensitive(i))
-			irq_desc[i].status |= IRQ_LEVEL;
-	}
-
-	ppc_md.get_irq = ppc4xx_pic_get_irq;
-}
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
deleted file mode 100644
index 353d746b47e1..000000000000
--- a/arch/ppc/syslib/ppc4xx_setup.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *
- *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- *    Copyright 2000-2001 MontaVista Software Inc.
- *      Completed implementation.
- *      Author: MontaVista Software, Inc.  <source@mvista.com>
- *              Frank Rowand <frank_rowand@mvista.com>
- *              Debbie Chu   <debbie_chu@mvista.com>
- *	Further modifications by Armin Kuster
- *
- *    Module name: ppc4xx_setup.c
- *
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/reboot.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/initrd.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-#include <linux/console.h>
-#include <linux/serial_reg.h>
-#include <linux/seq_file.h>
-
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/kgdb.h>
-#include <asm/ibm4xx.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/bootinfo.h>
-
-#include <syslib/gen550.h>
-
-/* Function Prototypes */
-extern void abort(void);
-extern void ppc4xx_find_bridges(void);
-
-/* Global Variables */
-bd_t __res;
-
-void __init
-ppc4xx_setup_arch(void)
-{
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-        mtspr(SPRN_DBCR0, (DBCR0_IDM));
-	mtspr(SPRN_DBSR, 0xffffffff);
-#endif
-
-	/* Setup PCI host bridges */
-#ifdef CONFIG_PCI
-	ppc4xx_find_bridges();
-#endif
-}
-
-/*
- *   This routine pretty-prints the platform's internal CPU clock
- *   frequencies into the buffer for usage in /proc/cpuinfo.
- */
-
-static int
-ppc4xx_show_percpuinfo(struct seq_file *m, int i)
-{
-	seq_printf(m, "clock\t\t: %ldMHz\n", (long)__res.bi_intfreq / 1000000);
-
-	return 0;
-}
-
-/*
- *   This routine pretty-prints the platform's internal bus clock
- *   frequencies into the buffer for usage in /proc/cpuinfo.
- */
-static int
-ppc4xx_show_cpuinfo(struct seq_file *m)
-{
-	bd_t *bip = &__res;
-
-	seq_printf(m, "machine\t\t: %s\n", PPC4xx_MACHINE_NAME);
-	seq_printf(m, "plb bus clock\t: %ldMHz\n",
-		   (long) bip->bi_busfreq / 1000000);
-#ifdef CONFIG_PCI
-	seq_printf(m, "pci bus clock\t: %dMHz\n",
-		   bip->bi_pci_busfreq / 1000000);
-#endif
-
-	return 0;
-}
-
-/*
- * Return the virtual address representing the top of physical RAM.
- */
-static unsigned long __init
-ppc4xx_find_end_of_memory(void)
-{
-	return ((unsigned long) __res.bi_memsize);
-}
-
-void __init
-ppc4xx_map_io(void)
-{
-	io_block_mapping(PPC4xx_ONB_IO_VADDR,
-			 PPC4xx_ONB_IO_PADDR, PPC4xx_ONB_IO_SIZE, _PAGE_IO);
-#ifdef CONFIG_PCI
-	io_block_mapping(PPC4xx_PCI_IO_VADDR,
-			 PPC4xx_PCI_IO_PADDR, PPC4xx_PCI_IO_SIZE, _PAGE_IO);
-	io_block_mapping(PPC4xx_PCI_CFG_VADDR,
-			 PPC4xx_PCI_CFG_PADDR, PPC4xx_PCI_CFG_SIZE, _PAGE_IO);
-	io_block_mapping(PPC4xx_PCI_LCFG_VADDR,
-			 PPC4xx_PCI_LCFG_PADDR, PPC4xx_PCI_LCFG_SIZE, _PAGE_IO);
-#endif
-}
-
-void __init
-ppc4xx_init_IRQ(void)
-{
-	ppc4xx_pic_init();
-}
-
-static void
-ppc4xx_restart(char *cmd)
-{
-	printk("%s\n", cmd);
-	abort();
-}
-
-static void
-ppc4xx_power_off(void)
-{
-	printk("System Halted\n");
-	local_irq_disable();
-	while (1) ;
-}
-
-static void
-ppc4xx_halt(void)
-{
-	printk("System Halted\n");
-	local_irq_disable();
-	while (1) ;
-}
-
-/*
- * This routine retrieves the internal processor frequency from the board
- * information structure, sets up the kernel timer decrementer based on
- * that value, enables the 4xx programmable interval timer (PIT) and sets
- * it up for auto-reload.
- */
-static void __init
-ppc4xx_calibrate_decr(void)
-{
-	unsigned int freq;
-	bd_t *bip = &__res;
-
-#if defined(CONFIG_WALNUT) || defined(CONFIG_SYCAMORE)
-	/* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
-	mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
-#endif
-	freq = bip->bi_tbfreq;
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	/* Set the time base to zero.
-	   ** At 200 Mhz, time base will rollover in ~2925 years.
-	 */
-
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	/* Clear any pending timer interrupts */
-
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS);
-	mtspr(SPRN_TCR, TCR_PIE | TCR_ARE);
-
-	/* Set the PIT reload value and just let it run. */
-	mtspr(SPRN_PIT, tb_ticks_per_jiffy);
-}
-
-TODC_ALLOC();
-
-/*
- * Input(s):
- *   r3 - Optional pointer to a board information structure.
- *   r4 - Optional pointer to the physical starting address of the init RAM
- *        disk.
- *   r5 - Optional pointer to the physical ending address of the init RAM
- *        disk.
- *   r6 - Optional pointer to the physical starting address of any kernel
- *        command-line parameters.
- *   r7 - Optional pointer to the physical ending address of any kernel
- *        command-line parameters.
- */
-void __init
-ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	    unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	/* Initialize machine-dependent vectors */
-
-	ppc_md.setup_arch = ppc4xx_setup_arch;
-	ppc_md.show_percpuinfo = ppc4xx_show_percpuinfo;
-	ppc_md.show_cpuinfo = ppc4xx_show_cpuinfo;
-	ppc_md.init_IRQ = ppc4xx_init_IRQ;
-
-	ppc_md.restart = ppc4xx_restart;
-	ppc_md.power_off = ppc4xx_power_off;
-	ppc_md.halt = ppc4xx_halt;
-
-	ppc_md.calibrate_decr = ppc4xx_calibrate_decr;
-
-	ppc_md.find_end_of_memory = ppc4xx_find_end_of_memory;
-	ppc_md.setup_io_mappings = ppc4xx_map_io;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
-
-/* Called from machine_check_exception */
-void platform_machine_check(struct pt_regs *regs)
-{
-#if defined(DCRN_PLB0_BEAR)
-	printk("PLB0: BEAR= 0x%08x ACR=   0x%08x BESR=  0x%08x\n",
-	    mfdcr(DCRN_PLB0_BEAR), mfdcr(DCRN_PLB0_ACR),
-	    mfdcr(DCRN_PLB0_BESR));
-#endif
-#if defined(DCRN_POB0_BEAR)
-	printk("PLB0 to OPB: BEAR= 0x%08x BESR0= 0x%08x BESR1= 0x%08x\n",
-	    mfdcr(DCRN_POB0_BEAR), mfdcr(DCRN_POB0_BESR0),
-	    mfdcr(DCRN_POB0_BESR1));
-#endif
-
-}
diff --git a/arch/ppc/syslib/ppc4xx_sgdma.c b/arch/ppc/syslib/ppc4xx_sgdma.c
deleted file mode 100644
index c4b369b50f9c..000000000000
--- a/arch/ppc/syslib/ppc4xx_sgdma.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * IBM PPC4xx DMA engine scatter/gather library
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * Cleaned up and converted to new DCR access
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/ppc4xx_dma.h>
-
-void
-ppc4xx_set_sg_addr(int dmanr, phys_addr_t sg_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_sg_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_ASGH0 + (dmanr * 0x8), (u32)(sg_addr >> 32));
-#endif
-	mtdcr(DCRN_ASG0 + (dmanr * 0x8), (u32)sg_addr);
-}
-
-/*
- *   Add a new sgl descriptor to the end of a scatter/gather list
- *   which was created by alloc_dma_handle().
- *
- *   For a memory to memory transfer, both dma addresses must be
- *   valid. For a peripheral to memory transfer, one of the addresses
- *   must be set to NULL, depending on the direction of the transfer:
- *   memory to peripheral: set dst_addr to NULL,
- *   peripheral to memory: set src_addr to NULL.
- */
-int
-ppc4xx_add_dma_sgl(sgl_handle_t handle, phys_addr_t src_addr, phys_addr_t dst_addr,
-		   unsigned int count)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-
-	if (!handle) {
-		printk("ppc4xx_add_dma_sgl: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	}
-
-	if (psgl->dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_add_dma_sgl: bad channel: %d\n", psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch = &dma_channels[psgl->dmanr];
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		unsigned int aligned =
-		    (unsigned) src_addr | (unsigned) dst_addr | count;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if (aligned & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if (aligned & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if (aligned & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("ppc4xx_add_dma_sgl: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return DMA_STATUS_GENERAL_ERROR;
-		}
-		if (error)
-			printk
-			    ("Alignment warning: ppc4xx_add_dma_sgl src 0x%x dst 0x%x count 0x%x bus width var %d\n",
-			     src_addr, dst_addr, count, p_dma_ch->pwidth);
-
-	}
-#endif
-
-	if ((unsigned) (psgl->ptail + 1) >= ((unsigned) psgl + SGL_LIST_SIZE)) {
-		printk("sgl handle out of memory \n");
-		return DMA_STATUS_OUT_OF_MEMORY;
-	}
-
-	if (!psgl->ptail) {
-		psgl->phead = (ppc_sgl_t *)
-		    ((unsigned) psgl + sizeof (sgl_list_info_t));
-		psgl->phead_dma = psgl->dma_addr + sizeof(sgl_list_info_t);
-		psgl->ptail = psgl->phead;
-		psgl->ptail_dma = psgl->phead_dma;
-	} else {
-		if(p_dma_ch->int_on_final_sg) {
-			/* mask out all dma interrupts, except error, on tail
-			before adding new tail. */
-			psgl->ptail->control_count &=
-				~(SG_TCI_ENABLE | SG_ETI_ENABLE);
-		}
-		psgl->ptail->next = psgl->ptail_dma + sizeof(ppc_sgl_t);
-		psgl->ptail++;
-		psgl->ptail_dma += sizeof(ppc_sgl_t);
-	}
-
-	psgl->ptail->control = psgl->control;
-	psgl->ptail->src_addr = src_addr;
-	psgl->ptail->dst_addr = dst_addr;
-	psgl->ptail->control_count = (count >> p_dma_ch->shift) |
-	    psgl->sgl_control;
-	psgl->ptail->next = (uint32_t) NULL;
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Enable (start) the DMA described by the sgl handle.
- */
-void
-ppc4xx_enable_dma_sgl(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-	uint32_t sg_command;
-
-	if (!handle) {
-		printk("ppc4xx_enable_dma_sgl: null handle\n");
-		return;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return;
-	} else if (!psgl->phead) {
-		printk("ppc4xx_enable_dma_sgl: sg list empty\n");
-		return;
-	}
-
-	p_dma_ch = &dma_channels[psgl->dmanr];
-	psgl->ptail->control_count &= ~SG_LINK;	/* make this the last dscrptr */
-	sg_command = mfdcr(DCRN_ASGC);
-
-	ppc4xx_set_sg_addr(psgl->dmanr, psgl->phead_dma);
-
-	sg_command |= SSG_ENABLE(psgl->dmanr);
-
-	mtdcr(DCRN_ASGC, sg_command);	/* start transfer */
-}
-
-/*
- * Halt an active scatter/gather DMA operation.
- */
-void
-ppc4xx_disable_dma_sgl(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	uint32_t sg_command;
-
-	if (!handle) {
-		printk("ppc4xx_enable_dma_sgl: null handle\n");
-		return;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return;
-	}
-
-	sg_command = mfdcr(DCRN_ASGC);
-	sg_command &= ~SSG_ENABLE(psgl->dmanr);
-	mtdcr(DCRN_ASGC, sg_command);	/* stop transfer */
-}
-
-/*
- *  Returns number of bytes left to be transferred from the entire sgl list.
- *  *src_addr and *dst_addr get set to the source/destination address of
- *  the sgl descriptor where the DMA stopped.
- *
- *  An sgl transfer must NOT be active when this function is called.
- */
-int
-ppc4xx_get_dma_sgl_residue(sgl_handle_t handle, phys_addr_t * src_addr,
-			   phys_addr_t * dst_addr)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-	ppc_sgl_t *pnext, *sgl_addr;
-	uint32_t count_left;
-
-	if (!handle) {
-		printk("ppc4xx_get_dma_sgl_residue: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_get_dma_sgl_residue: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	sgl_addr = (ppc_sgl_t *) __va(mfdcr(DCRN_ASG0 + (psgl->dmanr * 0x8)));
-	count_left = mfdcr(DCRN_DMACT0 + (psgl->dmanr * 0x8)) & SG_COUNT_MASK;
-
-	if (!sgl_addr) {
-		printk("ppc4xx_get_dma_sgl_residue: sgl addr register is null\n");
-		goto error;
-	}
-
-	pnext = psgl->phead;
-	while (pnext &&
-	       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE) &&
-		(pnext != sgl_addr))
-	    ) {
-		pnext++;
-	}
-
-	if (pnext == sgl_addr) {	/* found the sgl descriptor */
-
-		*src_addr = pnext->src_addr;
-		*dst_addr = pnext->dst_addr;
-
-		/*
-		 * Now search the remaining descriptors and add their count.
-		 * We already have the remaining count from this descriptor in
-		 * count_left.
-		 */
-		pnext++;
-
-		while ((pnext != psgl->ptail) &&
-		       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE))
-		    ) {
-			count_left += pnext->control_count & SG_COUNT_MASK;
-		}
-
-		if (pnext != psgl->ptail) {	/* should never happen */
-			printk
-			    ("ppc4xx_get_dma_sgl_residue error (1) psgl->ptail 0x%x handle 0x%x\n",
-			     (unsigned int) psgl->ptail, (unsigned int) handle);
-			goto error;
-		}
-
-		/* success */
-		p_dma_ch = &dma_channels[psgl->dmanr];
-		return (count_left << p_dma_ch->shift);	/* count in bytes */
-
-	} else {
-		/* this shouldn't happen */
-		printk
-		    ("get_dma_sgl_residue, unable to match current address 0x%x, handle 0x%x\n",
-		     (unsigned int) sgl_addr, (unsigned int) handle);
-
-	}
-
-      error:
-	*src_addr = (phys_addr_t) NULL;
-	*dst_addr = (phys_addr_t) NULL;
-	return 0;
-}
-
-/*
- * Returns the address(es) of the buffer(s) contained in the head element of
- * the scatter/gather list.  The element is removed from the scatter/gather
- * list and the next element becomes the head.
- *
- * This function should only be called when the DMA is not active.
- */
-int
-ppc4xx_delete_dma_sgl_element(sgl_handle_t handle, phys_addr_t * src_dma_addr,
-			      phys_addr_t * dst_dma_addr)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-
-	if (!handle) {
-		printk("ppc4xx_delete_sgl_element: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_delete_sgl_element: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if (!psgl->phead) {
-		printk("ppc4xx_delete_sgl_element: sgl list empty\n");
-		*src_dma_addr = (phys_addr_t) NULL;
-		*dst_dma_addr = (phys_addr_t) NULL;
-		return DMA_STATUS_SGL_LIST_EMPTY;
-	}
-
-	*src_dma_addr = (phys_addr_t) psgl->phead->src_addr;
-	*dst_dma_addr = (phys_addr_t) psgl->phead->dst_addr;
-
-	if (psgl->phead == psgl->ptail) {
-		/* last descriptor on the list */
-		psgl->phead = NULL;
-		psgl->ptail = NULL;
-	} else {
-		psgl->phead++;
-		psgl->phead_dma += sizeof(ppc_sgl_t);
-	}
-
-	return DMA_STATUS_GOOD;
-}
-
-
-/*
- *   Create a scatter/gather list handle.  This is simply a structure which
- *   describes a scatter/gather list.
- *
- *   A handle is returned in "handle" which the driver should save in order to
- *   be able to access this list later.  A chunk of memory will be allocated
- *   to be used by the API for internal management purposes, including managing
- *   the sg list and allocating memory for the sgl descriptors.  One page should
- *   be more than enough for that purpose.  Perhaps it's a bit wasteful to use
- *   a whole page for a single sg list, but most likely there will be only one
- *   sg list per channel.
- *
- *   Interrupt notes:
- *   Each sgl descriptor has a copy of the DMA control word which the DMA engine
- *   loads in the control register.  The control word has a "global" interrupt
- *   enable bit for that channel. Interrupts are further qualified by a few bits
- *   in the sgl descriptor count register.  In order to setup an sgl, we have to
- *   know ahead of time whether or not interrupts will be enabled at the completion
- *   of the transfers.  Thus, enable_dma_interrupt()/disable_dma_interrupt() MUST
- *   be called before calling alloc_dma_handle().  If the interrupt mode will never
- *   change after powerup, then enable_dma_interrupt()/disable_dma_interrupt()
- *   do not have to be called -- interrupts will be enabled or disabled based
- *   on how the channel was configured after powerup by the hw_init_dma_channel()
- *   function.  Each sgl descriptor will be setup to interrupt if an error occurs;
- *   however, only the last descriptor will be setup to interrupt. Thus, an
- *   interrupt will occur (if interrupts are enabled) only after the complete
- *   sgl transfer is done.
- */
-int
-ppc4xx_alloc_dma_handle(sgl_handle_t * phandle, unsigned int mode, unsigned int dmanr)
-{
-	sgl_list_info_t *psgl=NULL;
-	dma_addr_t dma_addr;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-	uint32_t sg_command;
-	uint32_t ctc_settings;
-	void *ret;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_alloc_dma_handle: invalid channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if (!phandle) {
-		printk("ppc4xx_alloc_dma_handle: null handle pointer\n");
-		return DMA_STATUS_NULL_POINTER;
-	}
-
-	/* Get a page of memory, which is zeroed out by consistent_alloc() */
-	ret = dma_alloc_coherent(NULL, DMA_PPC4xx_SIZE, &dma_addr, GFP_KERNEL);
-	if (ret != NULL) {
-		memset(ret, 0, DMA_PPC4xx_SIZE);
-		psgl = (sgl_list_info_t *) ret;
-	}
-
-	if (psgl == NULL) {
-		*phandle = (sgl_handle_t) NULL;
-		return DMA_STATUS_OUT_OF_MEMORY;
-	}
-
-	psgl->dma_addr = dma_addr;
-	psgl->dmanr = dmanr;
-
-	/*
-	 * Modify and save the control word. These words will be
-	 * written to each sgl descriptor.  The DMA engine then
-	 * loads this control word into the control register
-	 * every time it reads a new descriptor.
-	 */
-	psgl->control = p_dma_ch->control;
-	/* Clear all mode bits */
-	psgl->control &= ~(DMA_TM_MASK | DMA_TD);
-	/* Save control word and mode */
-	psgl->control |= (mode | DMA_CE_ENABLE);
-
-	/* In MM mode, we must set ETD/TCE */
-	if (mode == DMA_MODE_MM)
-		psgl->control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
-
-	if (p_dma_ch->int_enable) {
-		/* Enable channel interrupt */
-		psgl->control |= DMA_CIE_ENABLE;
-	} else {
-		psgl->control &= ~DMA_CIE_ENABLE;
-	}
-
-	sg_command = mfdcr(DCRN_ASGC);
-	sg_command |= SSG_MASK_ENABLE(dmanr);
-
-	/* Enable SGL control access */
-	mtdcr(DCRN_ASGC, sg_command);
-	psgl->sgl_control = SG_ERI_ENABLE | SG_LINK;
-
-	/* keep control count register settings */
-	ctc_settings = mfdcr(DCRN_DMACT0 + (dmanr * 0x8))
-		& (DMA_CTC_BSIZ_MSK | DMA_CTC_BTEN); /*burst mode settings*/
-	psgl->sgl_control |= ctc_settings;
-
-	if (p_dma_ch->int_enable) {
-		if (p_dma_ch->tce_enable)
-			psgl->sgl_control |= SG_TCI_ENABLE;
-		else
-			psgl->sgl_control |= SG_ETI_ENABLE;
-	}
-
-	*phandle = (sgl_handle_t) psgl;
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Destroy a scatter/gather list handle that was created by alloc_dma_handle().
- * The list must be empty (contain no elements).
- */
-void
-ppc4xx_free_dma_handle(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-
-	if (!handle) {
-		printk("ppc4xx_free_dma_handle: got NULL\n");
-		return;
-	} else if (psgl->phead) {
-		printk("ppc4xx_free_dma_handle: list not empty\n");
-		return;
-	} else if (!psgl->dma_addr) {	/* should never happen */
-		printk("ppc4xx_free_dma_handle: no dma address\n");
-		return;
-	}
-
-	dma_free_coherent(NULL, DMA_PPC4xx_SIZE, (void *) psgl, 0);
-}
-
-EXPORT_SYMBOL(ppc4xx_alloc_dma_handle);
-EXPORT_SYMBOL(ppc4xx_free_dma_handle);
-EXPORT_SYMBOL(ppc4xx_add_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_delete_dma_sgl_element);
-EXPORT_SYMBOL(ppc4xx_enable_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_disable_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_get_dma_sgl_residue);
diff --git a/arch/ppc/syslib/ppc8xx_pic.c b/arch/ppc/syslib/ppc8xx_pic.c
deleted file mode 100644
index bce9a75c80e3..000000000000
--- a/arch/ppc/syslib/ppc8xx_pic.c
+++ /dev/null
@@ -1,126 +0,0 @@
-#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include "ppc8xx_pic.h"
-
-extern int cpm_get_irq(void);
-
-/* The 8xx internal interrupt controller.  It is usually
- * the only interrupt controller.  Some boards, like the MBX and
- * Sandpoint have the 8259 as a secondary controller.  Depending
- * upon the processor type, the internal controller can have as
- * few as 16 interrupts or as many as 64.  We could use  the
- * "clear_bit()" and "set_bit()" functions like other platforms,
- * but they are overkill for us.
- */
-
-static void m8xx_mask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-}
-
-static void m8xx_unmask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-}
-
-static void m8xx_end_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-			&& irq_desc[irq_nr].action) {
-		int bit, word;
-
-		bit = irq_nr & 0x1f;
-		word = irq_nr >> 5;
-
-		ppc_cached_irq_mask[word] |= (1 << (31-bit));
-		out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-	}
-}
-
-
-static void m8xx_mask_and_ack(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend, 1 << (31-bit));
-}
-
-struct hw_interrupt_type ppc8xx_pic = {
-	.typename = " 8xx SIU  ",
-	.enable = m8xx_unmask_irq,
-	.disable = m8xx_mask_irq,
-	.ack = m8xx_mask_and_ack,
-	.end = m8xx_end_irq,
-};
-
-/*
- * We either return a valid interrupt or -1 if there is nothing pending
- */
-int
-m8xx_get_irq(struct pt_regs *regs)
-{
-	int irq;
-
-	/* For MPC8xx, read the SIVEC register and shift the bits down
-	 * to get the irq number.
-	 */
-	irq = in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec) >> 26;
-
-	/*
-	 * When we read the sivec without an interrupt to process, we will
-	 * get back SIU_LEVEL7.  In this case, return -1
-	 */
-        if (irq == CPM_INTERRUPT)
-        	irq = CPM_IRQ_OFFSET + cpm_get_irq();
-#if defined(CONFIG_PCI)
-	else if (irq == ISA_BRIDGE_INT) {
-		int isa_irq;
-
-		if ((isa_irq = i8259_poll(regs)) >= 0)
-			irq = I8259_IRQ_OFFSET + isa_irq;
-	}
-#endif	/* CONFIG_PCI */
-	else if (irq == SIU_LEVEL7)
-		irq = -1;
-
-	return irq;
-}
-
-#if defined(CONFIG_MBX) && defined(CONFIG_PCI)
-/* Only the MBX uses the external 8259.  This allows us to catch standard
- * drivers that may mess up the internal interrupt controllers, and also
- * allow them to run without modification on the MBX.
- */
-void mbx_i8259_action(int irq, void *dev_id, struct pt_regs *regs)
-{
-	/* This interrupt handler never actually gets called.  It is
-	 * installed only to unmask the 8259 cascade interrupt in the SIU
-	 * and to make the 8259 cascade interrupt visible in /proc/interrupts.
-	 */
-}
-#endif	/* CONFIG_PCI */
diff --git a/arch/ppc/syslib/ppc8xx_pic.h b/arch/ppc/syslib/ppc8xx_pic.h
deleted file mode 100644
index 53bcd97ef7f5..000000000000
--- a/arch/ppc/syslib/ppc8xx_pic.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _PPC_KERNEL_PPC8xx_H
-#define _PPC_KERNEL_PPC8xx_H
-
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-extern struct hw_interrupt_type ppc8xx_pic;
-
-void m8xx_do_IRQ(struct pt_regs *regs,
-                 int            cpu);
-int m8xx_get_irq(struct pt_regs *regs);
-
-#ifdef CONFIG_MBX
-#include <asm/i8259.h>
-#include <asm/io.h>
-void mbx_i8259_action(int cpl, void *dev_id, struct pt_regs *regs);
-#endif
-
-#endif /* _PPC_KERNEL_PPC8xx_H */
diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c
deleted file mode 100644
index 837183c24dfc..000000000000
--- a/arch/ppc/syslib/ppc_sys.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * PPC System library functions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor Inc.
- * Copyright 2005 MontaVista, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <asm/ppc_sys.h>
-
-int (*ppc_sys_device_fixup) (struct platform_device * pdev);
-
-static int ppc_sys_inited;
-static int ppc_sys_func_inited;
-
-static const char *ppc_sys_func_names[] = {
-	[PPC_SYS_FUNC_DUMMY] = "dummy",
-	[PPC_SYS_FUNC_ETH] = "eth",
-	[PPC_SYS_FUNC_UART] = "uart",
-	[PPC_SYS_FUNC_HLDC] = "hldc",
-	[PPC_SYS_FUNC_USB] = "usb",
-	[PPC_SYS_FUNC_IRDA] = "irda",
-};
-
-void __init identify_ppc_sys_by_id(u32 id)
-{
-	unsigned int i = 0;
-	while (1) {
-		if ((ppc_sys_specs[i].mask & id) == ppc_sys_specs[i].value)
-			break;
-		i++;
-	}
-
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-
-	return;
-}
-
-void __init identify_ppc_sys_by_name(char *name)
-{
-	unsigned int i = 0;
-	while (ppc_sys_specs[i].ppc_sys_name[0]) {
-		if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name))
-			break;
-		i++;
-	}
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-
-	return;
-}
-
-static int __init count_sys_specs(void)
-{
-	int i = 0;
-	while (ppc_sys_specs[i].ppc_sys_name[0])
-		i++;
-	return i;
-}
-
-static int __init find_chip_by_name_and_id(char *name, u32 id)
-{
-	int ret = -1;
-	unsigned int i = 0;
-	unsigned int j = 0;
-	unsigned int dups = 0;
-
-	unsigned char matched[count_sys_specs()];
-
-	while (ppc_sys_specs[i].ppc_sys_name[0]) {
-		if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name))
-			matched[j++] = i;
-		i++;
-	}
-
-	ret = i;
-
-	if (j != 0) {
-		for (i = 0; i < j; i++) {
-			if ((ppc_sys_specs[matched[i]].mask & id) ==
-			    ppc_sys_specs[matched[i]].value) {
-				ret = matched[i];
-				dups++;
-			}
-		}
-		ret = (dups == 1) ? ret : (-1 * dups);
-	}
-	return ret;
-}
-
-void __init identify_ppc_sys_by_name_and_id(char *name, u32 id)
-{
-	int i = find_chip_by_name_and_id(name, id);
-	BUG_ON(i < 0);
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-}
-
-/* Update all memory resources by paddr, call before platform_device_register */
-void __init
-ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr)
-{
-	int i;
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-		if (((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) && 
-			((r->flags & PPC_SYS_IORESOURCE_FIXUPPED) != PPC_SYS_IORESOURCE_FIXUPPED)) {
-			r->start += paddr;
-			r->end += paddr;
-			r->flags |= PPC_SYS_IORESOURCE_FIXUPPED;
-		}
-	}
-}
-
-/* Get platform_data pointer out of platform device, call before platform_device_register */
-void *__init ppc_sys_get_pdata(enum ppc_sys_devices dev)
-{
-	return ppc_sys_platform_devices[dev].dev.platform_data;
-}
-
-void ppc_sys_device_remove(enum ppc_sys_devices dev)
-{
-	unsigned int i;
-
-	if (ppc_sys_inited) {
-		platform_device_unregister(&ppc_sys_platform_devices[dev]);
-	} else {
-		if (cur_ppc_sys_spec == NULL)
-			return;
-		for (i = 0; i < cur_ppc_sys_spec->num_devices; i++)
-			if (cur_ppc_sys_spec->device_list[i] == dev)
-				cur_ppc_sys_spec->device_list[i] = -1;
-	}
-}
-
-/* Platform-notify mapping
- * Helper function for BSP code to assign board-specific platfom-divice bits
- */
-
-void platform_notify_map(const struct platform_notify_dev_map *map,
-			 struct device *dev)
-{
-	struct platform_device *pdev;
-	int len, idx;
-	const char *s;
-
-	/* do nothing if no device or no bus_id */
-	if (!dev || !dev->bus_id)
-		return;
-
-	/* call per device map */
-	while (map->bus_id != NULL) {
-		idx = -1;
-		s = strrchr(dev->bus_id, '.');
-		if (s != NULL) {
-			idx = (int)simple_strtol(s + 1, NULL, 10);
-			len = s - dev->bus_id;
-		} else {
-			s = dev->bus_id;
-			len = strlen(dev->bus_id);
-		}
-
-		if (!strncmp(dev->bus_id, map->bus_id, len)) {
-			pdev = container_of(dev, struct platform_device, dev);
-			map->rtn(pdev, idx);
-		}
-		map++;
-	}
-}
-
-/*
-   Function assignment stuff.
- Intended to work as follows:
- the device name defined in foo_devices.c will be concatenated with :"func",
- where func is string map of respective function from platfom_device_func enum
-
- The PPC_SYS_FUNC_DUMMY function is intended to remove all assignments, making the device to appear
- in platform bus with unmodified name.
- */
-
-/*
-   Here we'll replace .name pointers with fixed-length strings
-   Hereby, this should be called *before* any func stuff triggeded.
- */
-void ppc_sys_device_initfunc(void)
-{
-	int i;
-	const char *name;
-	static char new_names[NUM_PPC_SYS_DEVS][BUS_ID_SIZE];
-	enum ppc_sys_devices cur_dev;
-
-	/* If inited yet, do nothing */
-	if (ppc_sys_func_inited)
-		return;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		if ((cur_dev = cur_ppc_sys_spec->device_list[i]) < 0)
-			continue;
-
-		if (ppc_sys_platform_devices[cur_dev].name) {
-			/*backup name */
-			name = ppc_sys_platform_devices[cur_dev].name;
-			strlcpy(new_names[i], name, BUS_ID_SIZE);
-			ppc_sys_platform_devices[cur_dev].name = new_names[i];
-		}
-	}
-
-	ppc_sys_func_inited = 1;
-}
-
-/*The "engine" of the func stuff. Here we either concat specified function string description
- to the name, or remove it if PPC_SYS_FUNC_DUMMY parameter is passed here*/
-void ppc_sys_device_setfunc(enum ppc_sys_devices dev,
-			    enum platform_device_func func)
-{
-	char *s;
-	char *name = (char *)ppc_sys_platform_devices[dev].name;
-	char tmp[BUS_ID_SIZE];
-
-	if (!ppc_sys_func_inited) {
-		printk(KERN_ERR "Unable to alter function - not inited!\n");
-		return;
-	}
-
-	if (ppc_sys_inited) {
-		platform_device_unregister(&ppc_sys_platform_devices[dev]);
-	}
-
-	if ((s = (char *)strchr(name, ':')) != NULL) {	/* reassign */
-		/* Either change the name after ':' or remove func modifications */
-		if (func != PPC_SYS_FUNC_DUMMY)
-			strlcpy(s + 1, ppc_sys_func_names[func], BUS_ID_SIZE);
-		else
-			*s = 0;
-	} else if (func != PPC_SYS_FUNC_DUMMY) {
-		/* do assignment if it is not just "clear"  request */
-		sprintf(tmp, "%s:%s", name, ppc_sys_func_names[func]);
-		strlcpy(name, tmp, BUS_ID_SIZE);
-	}
-
-	if (ppc_sys_inited) {
-		platform_device_register(&ppc_sys_platform_devices[dev]);
-	}
-}
-
-void ppc_sys_device_disable(enum ppc_sys_devices dev)
-{
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	/*Check if it is enabled*/
-	if(!(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED)) {
-		if (ppc_sys_inited) {
-			platform_device_unregister(&ppc_sys_platform_devices[dev]);
-		}
-		cur_ppc_sys_spec->config[dev] |= PPC_SYS_CONFIG_DISABLED;
-	}
-}
-
-void ppc_sys_device_enable(enum ppc_sys_devices dev)
-{
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	/*Check if it is disabled*/
-	if(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED) {
-		if (ppc_sys_inited) {
-			platform_device_register(&ppc_sys_platform_devices[dev]);
-		}
-		cur_ppc_sys_spec->config[dev] &= ~PPC_SYS_CONFIG_DISABLED;
-	}
-
-}
-
-void ppc_sys_device_enable_all(void)
-{
-	enum ppc_sys_devices cur_dev;
-	int i;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		cur_dev = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_device_enable(cur_dev);
-	}
-}
-
-void ppc_sys_device_disable_all(void)
-{
-	enum ppc_sys_devices cur_dev;
-	int i;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		cur_dev = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_device_disable(cur_dev);
-	}
-}
-
-
-static int __init ppc_sys_init(void)
-{
-	unsigned int i, dev_id, ret = 0;
-
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		dev_id = cur_ppc_sys_spec->device_list[i];
-		if ((dev_id != -1) &&
-		!(cur_ppc_sys_spec->config[dev_id] & PPC_SYS_CONFIG_DISABLED)) {
-			if (ppc_sys_device_fixup != NULL)
-				ppc_sys_device_fixup(&ppc_sys_platform_devices
-						     [dev_id]);
-			if (platform_device_register
-			    (&ppc_sys_platform_devices[dev_id])) {
-				ret = 1;
-				printk(KERN_ERR
-				       "unable to register device %d\n",
-				       dev_id);
-			}
-		}
-	}
-
-	ppc_sys_inited = 1;
-	return ret;
-}
-
-subsys_initcall(ppc_sys_init);
diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c
deleted file mode 100644
index fefbc217a56d..000000000000
--- a/arch/ppc/syslib/pq2_devices.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- * PQ2 Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/cpm2.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-#include <asm/machdep.h>
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC82xx_CPM_FCC1] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11300,
-				.end	= 0x1131f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8400,
-				.end	= 0x84ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC1,
-				.end	= SIU_INT_FCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_FCC2] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11320,
-				.end	= 0x1133f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8500,
-				.end	= 0x85ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC2,
-				.end	= SIU_INT_FCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_FCC3] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 3,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11340,
-				.end	= 0x1135f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8600,
-				.end	= 0x86ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC3,
-				.end	= SIU_INT_FCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_I2C] = {
-		.name = "fsl-cpm-i2c",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "i2c_mem",
-				.start	= 0x11860,
-				.end	= 0x118BF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "i2c_pram",
-				.start 	= 0x8afc,
-				.end	= 0x8afd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_I2C,
-				.end	= SIU_INT_I2C,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC1] = {
-		.name = "fsl-cpm-scc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A00,
-				.end	= 0x11A1F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8000,
-				.end	= 0x80ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC1,
-				.end	= SIU_INT_SCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC2] = {
-		.name = "fsl-cpm-scc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A20,
-				.end	= 0x11A3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8100,
-				.end	= 0x81ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC2,
-				.end	= SIU_INT_SCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC3] = {
-		.name = "fsl-cpm-scc",
-		.id	= 3,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name 	= "regs",
-				.start	= 0x11A40,
-				.end	= 0x11A5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8200,
-				.end	= 0x82ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC3,
-				.end	= SIU_INT_SCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC4] = {
-		.name = "fsl-cpm-scc",
-		.id	= 4,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A60,
-				.end	= 0x11A7F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8300,
-				.end	= 0x83ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC4,
-				.end	= SIU_INT_SCC4,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SPI] = {
-		.name = "fsl-cpm-spi",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "spi_mem",
-				.start	= 0x11AA0,
-				.end	= 0x11AFF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "spi_pram",
-				.start	= 0x89fc,
-				.end	= 0x89fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SPI,
-				.end	= SIU_INT_SPI,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_MCC1] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "mcc_mem",
-				.start	= 0x11B30,
-				.end	= 0x11B3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "mcc_pram",
-				.start	= 0x8700,
-				.end	= 0x877f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC1,
-				.end	= SIU_INT_MCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_MCC2] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "mcc_mem",
-				.start	= 0x11B50,
-				.end	= 0x11B5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "mcc_pram",
-				.start	= 0x8800,
-				.end	= 0x887f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC2,
-				.end	= SIU_INT_MCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SMC1] = {
-		.name = "fsl-cpm-smc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "smc_mem",
-				.start	= 0x11A80,
-				.end	= 0x11A8F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "smc_pram",
-				.start	= 0x87fc,
-				.end	= 0x87fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC1,
-				.end	= SIU_INT_SMC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SMC2] = {
-		.name = "fsl-cpm-smc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "smc_mem",
-				.start	= 0x11A90,
-				.end	= 0x11A9F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "smc_pram",
-				.start	= 0x88fc,
-				.end	= 0x88fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC2,
-				.end	= SIU_INT_SMC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_USB] = {
-		.name = "fsl-cpm-usb",
-		.id	= 1,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "usb_mem",
-				.start	= 0x11b60,
-				.end	= 0x11b78,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "usb_pram",
-				.start	= 0x8b00,
-				.end	= 0x8bff,
-				.flags 	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_USB,
-				.end	= SIU_INT_USB,
-				.flags	= IORESOURCE_IRQ,
-			},
-
-		},
-	},
-	[MPC82xx_SEC1] = {
-		.name = "fsl-sec",
-		.id = 1,
-		.num_resources = 1,
-		.resource = (struct resource[]) {
-			{
-				.name	= "sec_mem",
-				.start	= 0x40000,
-				.end	= 0x52fff,
-				.flags	= IORESOURCE_MEM,
-			},
-		},
-	},
-	[MPC82xx_MDIO_BB] = {
-		.name = "fsl-bb-mdio",
-		.id = 0,
-		.num_resources = 0,
-	},
-};
-
-static int __init mach_mpc82xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
-	return 0;
-}
-
-static int __init mach_mpc82xx_init(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("mach_mpc82xx_init:enter", 0);
-	ppc_sys_device_fixup = mach_mpc82xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc82xx_init);
diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c
deleted file mode 100644
index 9c85300846c7..000000000000
--- a/arch/ppc/syslib/pq2_sys.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * PQ2 System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	/* below is a list of the 8260 family of processors */
-	{
-		.ppc_sys_name	= "8250",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8255",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 11,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2,
-			MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8260",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8264",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8265",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8266",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	/* below is a list of the 8272 family of processors */
-	{
-		.ppc_sys_name	= "8247",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000d00,
-		.num_devices	= 10,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB,
-		},
-	},
-	{
-		.ppc_sys_name	= "8248",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000c00,
-		.num_devices	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
-		},
-	},
-	{
-		.ppc_sys_name	= "8271",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000d00,
-		.num_devices	= 10,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB,
-		},
-	},
-	{
-		.ppc_sys_name	= "8272",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000c00,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
-			MPC82xx_MDIO_BB,
-		},
-	},
-	/* below is a list of the 8280 family of processors */
-	{
-		.ppc_sys_name	= "8270",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		.ppc_sys_name	= "8275",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		.ppc_sys_name	= "8280",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		/* default match */
-		.ppc_sys_name	= "",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/prep_nvram.c b/arch/ppc/syslib/prep_nvram.c
deleted file mode 100644
index 474dccbc4a8a..000000000000
--- a/arch/ppc/syslib/prep_nvram.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 1998  Corey Minyard
- *
- * This reads the NvRAM on PReP compliant machines (generally from IBM or
- * Motorola).  Motorola kept the format of NvRAM in their ROM, PPCBUG, the
- * same, long after they had stopped producing PReP compliant machines.  So
- * this code is useful in those cases as well.
- *
- */
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prep_nvram.h>
-
-static char nvramData[MAX_PREP_NVRAM];
-static NVRAM_MAP *nvram=(NVRAM_MAP *)&nvramData[0];
-
-unsigned char prep_nvram_read_val(int addr)
-{
-	outb(addr, PREP_NVRAM_AS0);
-	outb(addr>>8, PREP_NVRAM_AS1);
-	return inb(PREP_NVRAM_DATA);
-}
-
-void prep_nvram_write_val(int           addr,
-			  unsigned char val)
-{
-	outb(addr, PREP_NVRAM_AS0);
-	outb(addr>>8, PREP_NVRAM_AS1);
-   	outb(val, PREP_NVRAM_DATA);
-}
-
-void __init init_prep_nvram(void)
-{
-	unsigned char *nvp;
-	int  i;
-	int  nvramSize;
-
-	/*
-	 * The following could fail if the NvRAM were corrupt but
-	 * we expect the boot firmware to have checked its checksum
-	 * before boot
-	 */
-	nvp = (char *) &nvram->Header;
-	for (i=0; i<sizeof(HEADER); i++)
-	{
-		*nvp = ppc_md.nvram_read_val(i);
-		nvp++;
-	}
-
-	/*
-	 * The PReP NvRAM may be any size so read in the header to
-	 * determine how much we must read in order to get the complete
-	 * GE area
-	 */
-	nvramSize=(int)nvram->Header.GEAddress+nvram->Header.GELength;
-	if(nvramSize>MAX_PREP_NVRAM)
-	{
-		/*
-		 * NvRAM is too large
-		 */
-		nvram->Header.GELength=0;
-		return;
-	}
-
-	/*
-	 * Read the remainder of the PReP NvRAM
-	 */
-	nvp = (char *) &nvram->GEArea[0];
-	for (i=sizeof(HEADER); i<nvramSize; i++)
-	{
-		*nvp = ppc_md.nvram_read_val(i);
-		nvp++;
-	}
-}
-
-char *prep_nvram_get_var(const char *name)
-{
-	char *cp;
-	int  namelen;
-
-	namelen = strlen(name);
-	cp = prep_nvram_first_var();
-	while (cp != NULL) {
-		if ((strncmp(name, cp, namelen) == 0)
-		    && (cp[namelen] == '='))
-		{
-			return cp+namelen+1;
-		}
-		cp = prep_nvram_next_var(cp);
-	}
-
-	return NULL;
-}
-
-char *prep_nvram_first_var(void)
-{
-        if (nvram->Header.GELength == 0) {
-		return NULL;
-	} else {
-		return (((char *)nvram)
-			+ ((unsigned int) nvram->Header.GEAddress));
-	}
-}
-
-char *prep_nvram_next_var(char *name)
-{
-	char *cp;
-
-
-	cp = name;
-	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
-	       && (*cp != '\0'))
-	{
-		cp++;
-	}
-
-	/* Skip over any null characters. */
-	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
-	       && (*cp == '\0'))
-	{
-		cp++;
-	}
-
-	if ((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength) {
-		return cp;
-	} else {
-		return NULL;
-	}
-}
diff --git a/arch/ppc/syslib/qspan_pci.c b/arch/ppc/syslib/qspan_pci.c
deleted file mode 100644
index 7a97c7440b30..000000000000
--- a/arch/ppc/syslib/qspan_pci.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * QSpan pci routines.
- * Most 8xx boards use the QSpan PCI bridge.  The config address register
- * is located 0x500 from the base of the bridge control/status registers.
- * The data register is located at 0x504.
- * This is a two step operation.  First, the address register is written,
- * then the data register is read/written as required.
- * I don't know what to do about interrupts (yet).
- *
- * The RPX Classic implementation shares a chip select for normal
- * PCI access and QSpan control register addresses.  The selection is
- * further selected by a bit setting in a board control register.
- * Although it should happen, we disable interrupts during this operation
- * to make sure some driver doesn't accidentally access the PCI while
- * we have switched the chip select.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/mpc8xx.h>
-#include <asm/system.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-
-
-/*
- * This blows......
- * When reading the configuration space, if something does not respond
- * the bus times out and we get a machine check interrupt.  So, the
- * good ol' exception tables come to mind to trap it and return some
- * value.
- *
- * On an error we just return a -1, since that is what the caller wants
- * returned if nothing is present.  I copied this from __get_user_asm,
- * with the only difference of returning -1 instead of EFAULT.
- * There is an associated hack in the machine check trap code.
- *
- * The QSPAN is also a big endian device, that is it makes the PCI
- * look big endian to us.  This presents a problem for the Linux PCI
- * functions, which assume little endian.  For example, we see the
- * first 32-bit word like this:
- *	------------------------
- *	| Device ID | Vendor ID |
- *	------------------------
- * If we read/write as a double word, that's OK.  But in our world,
- * when read as a word, device ID is at location 0, not location 2 as
- * the little endian PCI would believe.  We have to switch bits in
- * the PCI addresses given to us to get the data to/from the correct
- * byte lanes.
- *
- * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
- * It always forces the MS bit to zero.  Therefore, dev_fn values
- * greater than 128 are returned as "no device found" errors.
- *
- * The QSPAN can only perform long word (32-bit) configuration cycles.
- * The "offset" must have the two LS bits set to zero.  Read operations
- * require we read the entire word and then sort out what should be
- * returned.  Write operations other than long word require that we
- * read the long word, update the proper word or byte, then write the
- * entire long word back.
- *
- * PCI Bridge hack.  We assume (correctly) that bus 0 is the primary
- * PCI bus from the QSPAN.  If we are called with a bus number other
- * than zero, we create a Type 1 configuration access that a downstream
- * PCI bridge will interpret.
- */
-
-#define __get_qspan_pci_config(x, addr, op)		\
-	__asm__ __volatile__(				\
-		"1:	"op" %0,0(%1)\n"		\
-		"	eieio\n"			\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,-1\n"			\
-		"	b 2b\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,3b\n"			\
-		".text"					\
-		: "=r"(x) : "r"(addr) : " %0")
-
-#define QS_CONFIG_ADDR	((volatile uint *)(PCI_CSR_ADDR + 0x500))
-#define QS_CONFIG_DATA	((volatile uint *)(PCI_CSR_ADDR + 0x504))
-
-#define mk_config_addr(bus, dev, offset) \
-	(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
-
-#define mk_config_type1(bus, dev, offset) \
-	mk_config_addr(bus, dev, offset) | 1;
-
-static DEFINE_SPINLOCK(pcibios_lock);
-
-int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned char *val)
-{
-	uint	temp;
-	u_char	*cp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*val = *cp;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned short *val)
-{
-	uint	temp;
-	ushort	*sp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
-	offset ^= 0x02;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*val = *sp;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned int *val)
-{
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(*val, QS_CONFIG_DATA, "lwz");
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned char val)
-{
-	uint	temp;
-	u_char	*cp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*cp = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned short val)
-{
-	uint	temp;
-	ushort	*sp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x02;
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*sp = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
-				    unsigned char offset, unsigned int val)
-{
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*(unsigned int *)QS_CONFIG_DATA = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_find_device(unsigned short vendor, unsigned short dev_id,
-			     unsigned short index, unsigned char *bus_ptr,
-			     unsigned char *dev_fn_ptr)
-{
-    int num, devfn;
-    unsigned int x, vendev;
-
-    if (vendor == 0xffff)
-	return PCIBIOS_BAD_VENDOR_ID;
-    vendev = (dev_id << 16) + vendor;
-    num = 0;
-    for (devfn = 0;  devfn < 32;  devfn++) {
-	qspan_pcibios_read_config_dword(0, devfn<<3, PCI_VENDOR_ID, &x);
-	if (x == vendev) {
-	    if (index == num) {
-		*bus_ptr = 0;
-		*dev_fn_ptr = devfn<<3;
-		return PCIBIOS_SUCCESSFUL;
-	    }
-	    ++num;
-	}
-    }
-    return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-int qspan_pcibios_find_class(unsigned int class_code, unsigned short index,
-			    unsigned char *bus_ptr, unsigned char *dev_fn_ptr)
-{
-    int devnr, x, num;
-
-    num = 0;
-    for (devnr = 0;  devnr < 32;  devnr++) {
-	qspan_pcibios_read_config_dword(0, devnr<<3, PCI_CLASS_REVISION, &x);
-	if ((x>>8) == class_code) {
-	    if (index == num) {
-		*bus_ptr = 0;
-		*dev_fn_ptr = devnr<<3;
-		return PCIBIOS_SUCCESSFUL;
-	    }
-	    ++num;
-	}
-    }
-    return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-void __init
-m8xx_pcibios_fixup(void)
-{
-   /* Lots to do here, all board and configuration specific. */
-}
-
-void __init
-m8xx_setup_pci_ptrs(void)
-{
-	set_config_access_method(qspan);
-
-	ppc_md.pcibios_fixup = m8xx_pcibios_fixup;
-}
-
diff --git a/arch/ppc/syslib/todc_time.c b/arch/ppc/syslib/todc_time.c
deleted file mode 100644
index a8168b8e5683..000000000000
--- a/arch/ppc/syslib/todc_time.c
+++ /dev/null
@@ -1,511 +0,0 @@
-/*
- * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818
- * Real Time Clocks/Timekeepers.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-
-/*
- * Depending on the hardware on your board and your board design, the
- * RTC/NVRAM may be accessed either directly (like normal memory) or via
- * address/data registers.  If your board uses the direct method, set
- * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and
- * 'nvram_as1' NULL.  If your board uses address/data regs to access nvram,
- * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the
- * address of the upper byte (leave NULL if using mc146818), and set
- * 'nvram_data' to the address of the 8-bit data register.
- *
- * In order to break the assumption that the RTC and NVRAM are accessed by
- * the same mechanism, you need to explicitly set 'ppc_md.rtc_read_val' and
- * 'ppc_md.rtc_write_val', otherwise the values of 'ppc_md.rtc_read_val'
- * and 'ppc_md.rtc_write_val' will be used.
- *
- * Note: Even though the documentation for the various RTC chips say that it
- * 	 take up to a second before it starts updating once the 'R' bit is
- * 	 cleared, they always seem to update even though we bang on it many
- * 	 times a second.  This is true, except for the Dallas Semi 1746/1747
- * 	 (possibly others).  Those chips seem to have a real problem whenever
- * 	 we set the 'R' bit before reading them, they basically stop counting.
- * 	 					--MAG
- */
-
-/*
- * 'todc_info' should be initialized in your *_setup.c file to
- * point to a fully initialized 'todc_info_t' structure.
- * This structure holds all the register offsets for your particular
- * TODC/RTC chip.
- * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you.
- */
-
-#ifdef	RTC_FREQ_SELECT
-#undef	RTC_FREQ_SELECT
-#define	RTC_FREQ_SELECT		control_b	/* Register A */
-#endif
-
-#ifdef	RTC_CONTROL
-#undef	RTC_CONTROL
-#define	RTC_CONTROL		control_a	/* Register B */
-#endif
-
-#ifdef	RTC_INTR_FLAGS
-#undef	RTC_INTR_FLAGS
-#define	RTC_INTR_FLAGS		watchdog	/* Register C */
-#endif
-
-#ifdef	RTC_VALID
-#undef	RTC_VALID
-#define	RTC_VALID		interrupts	/* Register D */
-#endif
-
-/* Access routines when RTC accessed directly (like normal memory) */
-u_char
-todc_direct_read_val(int addr)
-{
-	return readb((void __iomem *)(todc_info->nvram_data + addr));
-}
-
-void
-todc_direct_write_val(int addr, unsigned char val)
-{
-	writeb(val, (void __iomem *)(todc_info->nvram_data + addr));
-	return;
-}
-
-/* Access routines for accessing m48txx type chips via addr/data regs */
-u_char
-todc_m48txx_read_val(int addr)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-	return inb(todc_info->nvram_data);
-}
-
-void
-todc_m48txx_write_val(int addr, unsigned char val)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-   	outb(val, todc_info->nvram_data);
-	return;
-}
-
-/* Access routines for accessing mc146818 type chips via addr/data regs */
-u_char
-todc_mc146818_read_val(int addr)
-{
-	outb_p(addr, todc_info->nvram_as0);
-	return inb_p(todc_info->nvram_data);
-}
-
-void
-todc_mc146818_write_val(int addr, unsigned char val)
-{
-	outb_p(addr, todc_info->nvram_as0);
-   	outb_p(val, todc_info->nvram_data);
-}
-
-
-/*
- * Routines to make RTC chips with NVRAM buried behind an addr/data pair
- * have the NVRAM and clock regs appear at the same level.
- * The NVRAM will appear to start at addr 0 and the clock regs will appear
- * to start immediately after the NVRAM (actually, start at offset
- * todc_info->nvram_size).
- */
-static inline u_char
-todc_read_val(int addr)
-{
-	u_char	val;
-
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			val = ppc_md.rtc_read_val(todc_info->nvram_data_reg);
-		}
-		else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			val = ppc_md.rtc_read_val(addr);
-		}
-	}
-	else {
-		val = ppc_md.rtc_read_val(addr);
-	}
-
-	return val;
-}
-
-static inline void
-todc_write_val(int addr, u_char val)
-{
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			ppc_md.rtc_write_val(todc_info->nvram_data_reg, val);
-		}
-		else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			ppc_md.rtc_write_val(addr, val);
-		}
-	}
-	else {
-		ppc_md.rtc_write_val(addr, val);
-	}
-}
-
-/*
- * TODC routines
- *
- * There is some ugly stuff in that there are assumptions for the mc146818.
- *
- * Assumptions:
- *	- todc_info->control_a has the offset as mc146818 Register B reg
- *	- todc_info->control_b has the offset as mc146818 Register A reg
- *	- m48txx control reg's write enable or 'W' bit is same as
- *	  mc146818 Register B 'SET' bit (i.e., 0x80)
- *
- * These assumptions were made to make the code simpler.
- */
-long __init
-todc_time_init(void)
-{
-	u_char	cntl_b;
-
-	if (!ppc_md.rtc_read_val)
-		ppc_md.rtc_read_val = ppc_md.nvram_read_val;
-	if (!ppc_md.rtc_write_val)
-		ppc_md.rtc_write_val = ppc_md.nvram_write_val;
-	
-	cntl_b = todc_read_val(todc_info->control_b);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		if ((cntl_b & 0x70) != 0x20) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-			cntl_b &= ~0x70;
-			cntl_b |= 0x20;
-		}
-
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else if (todc_info->rtc_type == TODC_TYPE_DS17285) {
-		u_char mode;
-
-		mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A);
-		/* Make sure countdown clear is not set */
-		mode &= ~0x40;
-		/* Enable oscillator, extended register set */
-		mode |= 0x30;
-		todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode);
-
-	} else if (todc_info->rtc_type == TODC_TYPE_DS1501) {
-		u_char	month;
-
-		todc_info->enable_read = TODC_DS1501_CNTL_B_TE;
-		todc_info->enable_write = TODC_DS1501_CNTL_B_TE;
-
-		month = todc_read_val(todc_info->month);
-
-		if ((month & 0x80) == 0x80) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-			month &= ~0x80;
-			todc_write_val(todc_info->month, month);
-		}
-
-		cntl_b &= ~TODC_DS1501_CNTL_B_TE;
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else { /* must be a m48txx type */
-		u_char	cntl_a;
-
-		todc_info->enable_read = TODC_MK48TXX_CNTL_A_R;
-		todc_info->enable_write = TODC_MK48TXX_CNTL_A_W;
-
-		cntl_a = todc_read_val(todc_info->control_a);
-
-		/* Check & clear STOP bit in control B register */
-		if (cntl_b & TODC_MK48TXX_DAY_CB) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-
-			cntl_a |= todc_info->enable_write;
-			cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */
-
-			todc_write_val(todc_info->control_a, cntl_a);
-			todc_write_val(todc_info->control_b, cntl_b);
-		}
-
-		/* Make sure READ & WRITE bits are cleared. */
-		cntl_a &= ~(todc_info->enable_write |
-			    todc_info->enable_read);
-		todc_write_val(todc_info->control_a, cntl_a);
-	}
-
-	return 0;
-}
-
-/*
- * There is some ugly stuff in that there are assumptions that for a mc146818,
- * the todc_info->control_a has the offset of the mc146818 Register B reg and
- * that the register'ss 'SET' bit is the same as the m48txx's write enable
- * bit in the control register of the m48txx (i.e., 0x80).
- *
- * It was done to make the code look simpler.
- */
-ulong
-todc_get_rtc_time(void)
-{
-	uint	year = 0, mon = 0, day = 0, hour = 0, min = 0, sec = 0;
-	uint	limit, i;
-	u_char	save_control, uip = 0;
-
-	spin_lock(&rtc_lock);
-	save_control = todc_read_val(todc_info->control_a);
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		limit = 1;
-
-		switch (todc_info->rtc_type) {
-			case TODC_TYPE_DS1553:
-			case TODC_TYPE_DS1557:
-			case TODC_TYPE_DS1743:
-			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-			case TODC_TYPE_DS1747:
-			case TODC_TYPE_DS17285:
-				break;
-			default:
-				todc_write_val(todc_info->control_a,
-				       (save_control | todc_info->enable_read));
-		}
-	}
-	else {
-		limit = 100000000;
-	}
-
-	for (i=0; i<limit; i++) {
-		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-			uip = todc_read_val(todc_info->RTC_FREQ_SELECT);
-		}
-
-		sec = todc_read_val(todc_info->seconds) & 0x7f;
-		min = todc_read_val(todc_info->minutes) & 0x7f;
-		hour = todc_read_val(todc_info->hours) & 0x3f;
-		day = todc_read_val(todc_info->day_of_month) & 0x3f;
-		mon = todc_read_val(todc_info->month) & 0x1f;
-		year = todc_read_val(todc_info->year) & 0xff;
-
-		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-			uip |= todc_read_val(todc_info->RTC_FREQ_SELECT);
-			if ((uip & RTC_UIP) == 0) break;
-		}
-	}
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		switch (todc_info->rtc_type) {
-			case TODC_TYPE_DS1553:
-			case TODC_TYPE_DS1557:
-			case TODC_TYPE_DS1743:
-			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-			case TODC_TYPE_DS1747:
-			case TODC_TYPE_DS17285:
-				break;
-			default:
-				save_control &= ~(todc_info->enable_read);
-				todc_write_val(todc_info->control_a,
-						       save_control);
-		}
-	}
-	spin_unlock(&rtc_lock);
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
-	    ((save_control & RTC_DM_BINARY) == 0) ||
-	    RTC_ALWAYS_BCD) {
-
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
-	}
-
-	year = year + 1900;
-	if (year < 1970) {
-		year += 100;
-	}
-
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-int
-todc_set_rtc_time(unsigned long nowtime)
-{
-	struct rtc_time	tm;
-	u_char		save_control, save_freq_select = 0;
-
-	spin_lock(&rtc_lock);
-	to_tm(nowtime, &tm);
-
-	save_control = todc_read_val(todc_info->control_a);
-
-	/* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */
-	todc_write_val(todc_info->control_a,
-			       (save_control | todc_info->enable_write));
-	save_control &= ~(todc_info->enable_write); /* in case it was set */
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT);
-		todc_write_val(todc_info->RTC_FREQ_SELECT,
-				       save_freq_select | RTC_DIV_RESET2);
-	}
-
-
-        tm.tm_year = (tm.tm_year - 1900) % 100;
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
-	    ((save_control & RTC_DM_BINARY) == 0) ||
-	    RTC_ALWAYS_BCD) {
-
-		BIN_TO_BCD(tm.tm_sec);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_year);
-	}
-
-	todc_write_val(todc_info->seconds,      tm.tm_sec);
-	todc_write_val(todc_info->minutes,      tm.tm_min);
-	todc_write_val(todc_info->hours,        tm.tm_hour);
-	todc_write_val(todc_info->month,        tm.tm_mon);
-	todc_write_val(todc_info->day_of_month, tm.tm_mday);
-	todc_write_val(todc_info->year,         tm.tm_year);
-
-	todc_write_val(todc_info->control_a, save_control);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select);
-	}
-	spin_unlock(&rtc_lock);
-
-	return 0;
-}
-
-/*
- * Manipulates read bit to reliably read seconds at a high rate.
- */
-static unsigned char __init todc_read_timereg(int addr)
-{
-	unsigned char save_control = 0, val;
-
-	switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-		case TODC_TYPE_MC146818:
-			break;
-		default:
-			save_control = todc_read_val(todc_info->control_a);
-			todc_write_val(todc_info->control_a,
-				       (save_control | todc_info->enable_read));
-	}
-	val = todc_read_val(addr);
-
-	switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-		case TODC_TYPE_MC146818:
-			break;
-		default:
-			save_control &= ~(todc_info->enable_read);
-			todc_write_val(todc_info->control_a, save_control);
-	}
-
-	return val;
-}
-
-/*
- * This was taken from prep_setup.c
- * Use the NVRAM RTC to time a second to calibrate the decrementer.
- */
-void __init
-todc_calibrate_decr(void)
-{
-	ulong	freq;
-	ulong	tbl, tbu;
-        long	i, loop_count;
-        u_char	sec;
-
-	todc_time_init();
-
-	/*
-	 * Actually this is bad for precision, we should have a loop in
-	 * which we only read the seconds counter. todc_read_val writes
-	 * the address bytes on every call and this takes a lot of time.
-	 * Perhaps an nvram_wait_change method returning a time
-	 * stamp with a loop count as parameter would be the solution.
-	 */
-	/*
-	 * Need to make sure the tbl doesn't roll over so if tbu increments
-	 * during this test, we need to do it again.
-	 */
-	loop_count = 0;
-
-	sec = todc_read_timereg(todc_info->seconds) & 0x7f;
-
-	do {
-		tbu = get_tbu();
-
-		for (i = 0 ; i < 10000000 ; i++) {/* may take up to 1 second */
-		   tbl = get_tbl();
-
-		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
-		      break;
-		   }
-		}
-
-		sec = todc_read_timereg(todc_info->seconds) & 0x7f;
-
-		for (i = 0 ; i < 10000000 ; i++) { /* Should take 1 second */
-		   freq = get_tbl();
-
-		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
-		      break;
-		   }
-		}
-
-		freq -= tbl;
-	} while ((get_tbu() != tbu) && (++loop_count < 2));
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
diff --git a/arch/ppc/syslib/virtex_devices.c b/arch/ppc/syslib/virtex_devices.c
deleted file mode 100644
index 7322781be1c6..000000000000
--- a/arch/ppc/syslib/virtex_devices.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Virtex hard ppc405 core common device listing
- *
- * Copyright 2005-2007 Secret Lab Technologies Ltd.
- * Copyright 2005 Freescale Semiconductor Inc.
- * Copyright 2002-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-#include <asm/io.h>
-
-/*
- * UARTLITE: shortcut macro for single instance
- */
-#define XPAR_UARTLITE(num) { \
-	.name = "uartlite", \
-	.id = num, \
-	.num_resources = 2, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_UARTLITE_##num##_BASEADDR + 3, \
-			.end = XPAR_UARTLITE_##num##_HIGHADDR, \
-			.flags = IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_UARTLITE_##num##_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/*
- * Full UART: shortcut macro for single instance + platform data structure
- */
-#define XPAR_UART(num) { \
-	.mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \
-	.irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
-	.iotype = UPIO_MEM, \
-	.uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \
-	.flags = UPF_BOOT_AUTOCONF, \
-	.regshift = 2, \
-}
-
-/*
- * SystemACE: shortcut macro for single instance
- */
-#define XPAR_SYSACE(num) { \
-	.name		= "xsysace", \
-	.id		= XPAR_SYSACE_##num##_DEVICE_ID, \
-	.num_resources	= 2, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start	= XPAR_SYSACE_##num##_BASEADDR, \
-			.end	= XPAR_SYSACE_##num##_HIGHADDR, \
-			.flags	= IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start	= XPAR_INTC_0_SYSACE_##num##_VEC_ID, \
-			.flags	= IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/*
- * ML300/ML403 Video Device: shortcut macro for single instance
- */
-#define XPAR_TFT(num) { \
-	.name = "xilinxfb", \
-	.id = num, \
-	.num_resources = 1, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_TFT_##num##_BASEADDR, \
-			.end = XPAR_TFT_##num##_BASEADDR+7, \
-			.flags = IORESOURCE_IO, \
-		}, \
-	}, \
-}
-
-#define XPAR_AC97_CONTROLLER_REFERENCE(num) { \
-	.name = "ml403_ac97cr", \
-	.id = num, \
-	.num_resources = 3, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_OPB_AC97_CONTROLLER_REF_##num##_BASEADDR, \
-			.end = XPAR_OPB_AC97_CONTROLLER_REF_##num##_HIGHADDR, \
-			.flags = IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
-			.end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
-			.end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/* UART 8250 driver platform data table */
-struct plat_serial8250_port virtex_serial_platform_data[] = {
-#if defined(XPAR_UARTNS550_0_BASEADDR)
-	XPAR_UART(0),
-#endif
-#if defined(XPAR_UARTNS550_1_BASEADDR)
-	XPAR_UART(1),
-#endif
-#if defined(XPAR_UARTNS550_2_BASEADDR)
-	XPAR_UART(2),
-#endif
-#if defined(XPAR_UARTNS550_3_BASEADDR)
-	XPAR_UART(3),
-#endif
-#if defined(XPAR_UARTNS550_4_BASEADDR)
-	XPAR_UART(4),
-#endif
-#if defined(XPAR_UARTNS550_5_BASEADDR)
-	XPAR_UART(5),
-#endif
-#if defined(XPAR_UARTNS550_6_BASEADDR)
-	XPAR_UART(6),
-#endif
-#if defined(XPAR_UARTNS550_7_BASEADDR)
-	XPAR_UART(7),
-#endif
-	{ }, /* terminated by empty record */
-};
-
-
-struct platform_device virtex_platform_devices[] = {
-	/* UARTLITE instances */
-#if defined(XPAR_UARTLITE_0_BASEADDR)
-	XPAR_UARTLITE(0),
-#endif
-#if defined(XPAR_UARTLITE_1_BASEADDR)
-	XPAR_UARTLITE(1),
-#endif
-#if defined(XPAR_UARTLITE_2_BASEADDR)
-	XPAR_UARTLITE(2),
-#endif
-#if defined(XPAR_UARTLITE_3_BASEADDR)
-	XPAR_UARTLITE(3),
-#endif
-#if defined(XPAR_UARTLITE_4_BASEADDR)
-	XPAR_UARTLITE(4),
-#endif
-#if defined(XPAR_UARTLITE_5_BASEADDR)
-	XPAR_UARTLITE(5),
-#endif
-#if defined(XPAR_UARTLITE_6_BASEADDR)
-	XPAR_UARTLITE(6),
-#endif
-#if defined(XPAR_UARTLITE_7_BASEADDR)
-	XPAR_UARTLITE(7),
-#endif
-
-	/* Full UART instances */
-#if defined(XPAR_UARTNS550_0_BASEADDR)
-	{
-		.name		= "serial8250",
-		.id		= 0,
-		.dev.platform_data = virtex_serial_platform_data,
-	},
-#endif
-
-	/* SystemACE instances */
-#if defined(XPAR_SYSACE_0_BASEADDR)
-	XPAR_SYSACE(0),
-#endif
-#if defined(XPAR_SYSACE_1_BASEADDR)
-	XPAR_SYSACE(1),
-#endif
-
-#if defined(XPAR_TFT_0_BASEADDR)
-	XPAR_TFT(0),
-#endif
-#if defined(XPAR_TFT_1_BASEADDR)
-	XPAR_TFT(1),
-#endif
-#if defined(XPAR_TFT_2_BASEADDR)
-	XPAR_TFT(2),
-#endif
-#if defined(XPAR_TFT_3_BASEADDR)
-	XPAR_TFT(3),
-#endif
-
-	/* AC97 Controller Reference instances */
-#if defined(XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR)
-	XPAR_AC97_CONTROLLER_REFERENCE(0),
-#endif
-#if defined(XPAR_OPB_AC97_CONTROLLER_REF_1_BASEADDR)
-	XPAR_AC97_CONTROLLER_REFERENCE(1),
-#endif
-};
-
-/* Early serial support functions */
-static void __init
-virtex_early_serial_init(int num, struct plat_serial8250_port *pdata)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	struct uart_port serial_req;
-
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.mapbase	= pdata->mapbase;
-	serial_req.membase	= pdata->membase;
-	serial_req.irq		= pdata->irq;
-	serial_req.uartclk	= pdata->uartclk;
-	serial_req.regshift	= pdata->regshift;
-	serial_req.iotype	= pdata->iotype;
-	serial_req.flags	= pdata->flags;
-	gen550_init(num, &serial_req);
-#endif
-}
-
-void __init
-virtex_early_serial_map(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct plat_serial8250_port *pdata;
-	int i = 0;
-
-	pdata = virtex_serial_platform_data;
-	while(pdata && pdata->flags) {
-		pdata->membase = ioremap(pdata->mapbase, 0x100);
-		virtex_early_serial_init(i, pdata);
-		pdata++;
-		i++;
-	}
-#endif /* CONFIG_SERIAL_8250 */
-}
-
-/*
- * default fixup routine; do nothing and return success.
- *
- * Reimplement this routine in your custom board support file to
- * override the default behaviour
- */
-int __attribute__ ((weak))
-virtex_device_fixup(struct platform_device *dev)
-{
-	return 0;
-}
-
-static int __init virtex_init(void)
-{
-	struct platform_device *index = virtex_platform_devices;
-	unsigned int ret = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(virtex_platform_devices); i++, index++) {
-		if (virtex_device_fixup(index) != 0)
-			continue;
-
-		if (platform_device_register(index)) {
-			ret = 1;
-			printk(KERN_ERR "cannot register dev %s:%d\n",
-			       index->name, index->id);
-		}
-	}
-	return ret;
-}
-
-subsys_initcall(virtex_init);
diff --git a/arch/ppc/syslib/virtex_devices.h b/arch/ppc/syslib/virtex_devices.h
deleted file mode 100644
index 6ebd9b4b8f1c..000000000000
--- a/arch/ppc/syslib/virtex_devices.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Common support header for virtex ppc405 platforms
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_VIRTEX_DEVICES_H__
-#define __ASM_VIRTEX_DEVICES_H__
-
-#include <linux/platform_device.h>
-#include <linux/xilinxfb.h>
-
-void __init virtex_early_serial_map(void);
-
-/* Prototype for device fixup routine.  Implement this routine in the
- * board specific fixup code and the generic setup code will call it for
- * each device is the platform device list.
- *
- * If the hook returns a non-zero value, then the device will not get
- * registered with the platform bus
- */
-int virtex_device_fixup(struct platform_device *dev);
-
-/* SPI Controller IP */
-struct xspi_platform_data {
-	s16 bus_num;
-	u16 num_chipselect;
-	u32 speed_hz;
-};
-
-#endif  /* __ASM_VIRTEX_DEVICES_H__ */
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
deleted file mode 100644
index 3b82333e96d8..000000000000
--- a/arch/ppc/syslib/xilinx_pic.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Interrupt controller driver for Xilinx Virtex-II Pro.
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-#include <asm/ibm4xx.h>
-#include <asm/machdep.h>
-
-/* No one else should require these constants, so define them locally here. */
-#define ISR 0			/* Interrupt Status Register */
-#define IPR 1			/* Interrupt Pending Register */
-#define IER 2			/* Interrupt Enable Register */
-#define IAR 3			/* Interrupt Acknowledge Register */
-#define SIE 4			/* Set Interrupt Enable bits */
-#define CIE 5			/* Clear Interrupt Enable bits */
-#define IVR 6			/* Interrupt Vector Register */
-#define MER 7			/* Master Enable Register */
-
-#if XPAR_XINTC_USE_DCR == 0
-static volatile u32 *intc;
-#define intc_out_be32(addr, mask)     out_be32((addr), (mask))
-#define intc_in_be32(addr)            in_be32((addr))
-#else
-#define intc    XPAR_INTC_0_BASEADDR
-#define intc_out_be32(addr, mask)     mtdcr((addr), (mask))
-#define intc_in_be32(addr)            mfdcr((addr))
-#endif
-
-static void
-xilinx_intc_enable(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("enable: %d\n", irq);
-	intc_out_be32(intc + SIE, mask);
-}
-
-static void
-xilinx_intc_disable(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("disable: %d\n", irq);
-	intc_out_be32(intc + CIE, mask);
-}
-
-static void
-xilinx_intc_disable_and_ack(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("disable_and_ack: %d\n", irq);
-	intc_out_be32(intc + CIE, mask);
-	if (!(irq_desc[irq].status & IRQ_LEVEL))
-		intc_out_be32(intc + IAR, mask);	/* ack edge triggered intr */
-}
-
-static void
-xilinx_intc_end(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-
-	pr_debug("end: %d\n", irq);
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
-		intc_out_be32(intc + SIE, mask);
-		/* ack level sensitive intr */
-		if (irq_desc[irq].status & IRQ_LEVEL)
-			intc_out_be32(intc + IAR, mask);
-	}
-}
-
-static struct hw_interrupt_type xilinx_intc = {
-	.typename = "Xilinx Interrupt Controller",
-	.enable = xilinx_intc_enable,
-	.disable = xilinx_intc_disable,
-	.ack = xilinx_intc_disable_and_ack,
-	.end = xilinx_intc_end,
-};
-
-int
-xilinx_pic_get_irq(void)
-{
-	int irq;
-
-	/*
-	 * NOTE: This function is the one that needs to be improved in
-	 * order to handle multiple interrupt controllers.  It currently
-	 * is hardcoded to check for interrupts only on the first INTC.
-	 */
-
-	irq = intc_in_be32(intc + IVR);
-	if (irq != -1)
-		irq = irq;
-
-	pr_debug("get_irq: %d\n", irq);
-
-	return (irq);
-}
-
-void __init
-ppc4xx_pic_init(void)
-{
-	int i;
-
-	/*
-	 * NOTE: The assumption here is that NR_IRQS is 32 or less
-	 * (NR_IRQS is 32 for PowerPC 405 cores by default).
-	 */
-#if (NR_IRQS > 32)
-#error NR_IRQS > 32 not supported
-#endif
-
-#if XPAR_XINTC_USE_DCR == 0
-	intc = ioremap(XPAR_INTC_0_BASEADDR, 32);
-
-	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX mapped to 0x%08lX\n",
-	       (unsigned long) XPAR_INTC_0_BASEADDR, (unsigned long) intc);
-#else
-	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX (DCR)\n",
-	       (unsigned long) XPAR_INTC_0_BASEADDR);
-#endif
-
-	/*
-	 * Disable all external interrupts until they are
-	 * explicitly requested.
-	 */
-	intc_out_be32(intc + IER, 0);
-
-	/* Acknowledge any pending interrupts just in case. */
-	intc_out_be32(intc + IAR, ~(u32) 0);
-
-	/* Turn on the Master Enable. */
-	intc_out_be32(intc + MER, 0x3UL);
-
-	ppc_md.get_irq = xilinx_pic_get_irq;
-
-	for (i = 0; i < NR_IRQS; ++i) {
-		irq_desc[i].chip = &xilinx_intc;
-
-		if (XPAR_INTC_0_KIND_OF_INTR & (0x00000001 << i))
-			irq_desc[i].status &= ~IRQ_LEVEL;
-		else
-			irq_desc[i].status |= IRQ_LEVEL;
-	}
-}
diff --git a/arch/ppc/xmon/Makefile b/arch/ppc/xmon/Makefile
deleted file mode 100644
index 9aa260b926f5..000000000000
--- a/arch/ppc/xmon/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# Makefile for xmon
-
-ifdef CONFIG_8xx
-obj-y		:= start_8xx.o
-else
-obj-y		:= start.o
-endif
-obj-y		+= xmon.o ppc-dis.o ppc-opc.o subr_prf.o setjmp.o
diff --git a/arch/ppc/xmon/ansidecl.h b/arch/ppc/xmon/ansidecl.h
deleted file mode 100644
index c9b9f0929e9e..000000000000
--- a/arch/ppc/xmon/ansidecl.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* ANSI and traditional C compatibility macros
-   Copyright 1991, 1992 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* ANSI and traditional C compatibility macros
-
-   ANSI C is assumed if __STDC__ is #defined.
-
-   Macro	ANSI C definition	Traditional C definition
-   -----	---- - ----------	----------- - ----------
-   PTR		`void *'		`char *'
-   LONG_DOUBLE	`long double'		`double'
-   VOLATILE	`volatile'		`'
-   SIGNED	`signed'		`'
-   PTRCONST	`void *const'		`char *'
-   ANSI_PROTOTYPES  1			not defined
-
-   CONST is also defined, but is obsolete.  Just use const.
-
-   DEFUN (name, arglist, args)
-
-	Defines function NAME.
-
-	ARGLIST lists the arguments, separated by commas and enclosed in
-	parentheses.  ARGLIST becomes the argument list in traditional C.
-
-	ARGS list the arguments with their types.  It becomes a prototype in
-	ANSI C, and the type declarations in traditional C.  Arguments should
-	be separated with `AND'.  For functions with a variable number of
-	arguments, the last thing listed should be `DOTS'.
-
-   DEFUN_VOID (name)
-
-	Defines a function NAME, which takes no arguments.
-
-   obsolete --     EXFUN (name, (prototype))	-- obsolete.
-
-	Replaced by PARAMS.  Do not use; will disappear someday soon.
-	Was used in external function declarations.
-	In ANSI C it is `NAME PROTOTYPE' (so PROTOTYPE should be enclosed in
-	parentheses).  In traditional C it is `NAME()'.
-	For a function that takes no arguments, PROTOTYPE should be `(void)'.
-
-    PARAMS ((args))
-
-	We could use the EXFUN macro to handle prototype declarations, but
-	the name is misleading and the result is ugly.  So we just define a
-	simple macro to handle the parameter lists, as in:
-
-	      static int foo PARAMS ((int, char));
-
-	This produces:  `static int foo();' or `static int foo (int, char);'
-
-	EXFUN would have done it like this:
-
-	      static int EXFUN (foo, (int, char));
-
-	but the function is not external...and it's hard to visually parse
-	the function name out of the mess.   EXFUN should be considered
-	obsolete; new code should be written to use PARAMS.
-
-    For example:
-	extern int printf PARAMS ((CONST char *format DOTS));
-	int DEFUN(fprintf, (stream, format),
-		  FILE *stream AND CONST char *format DOTS) { ... }
-	void DEFUN_VOID(abort) { ... }
-*/
-
-#ifndef	_ANSIDECL_H
-
-#define	_ANSIDECL_H	1
-
-
-/* Every source file includes this file,
-   so they will all get the switch for lint.  */
-/* LINTLIBRARY */
-
-
-#if defined (__STDC__) || defined (_AIX) || (defined (__mips) && defined (_SYSTYPE_SVR4)) || defined(WIN32)
-/* All known AIX compilers implement these things (but don't always
-   define __STDC__).  The RISC/OS MIPS compiler defines these things
-   in SVR4 mode, but does not define __STDC__.  */
-
-#define	PTR		void *
-#define	PTRCONST	void *CONST
-#define	LONG_DOUBLE	long double
-
-#define	AND		,
-#define	NOARGS		void
-#define	CONST		const
-#define	VOLATILE	volatile
-#define	SIGNED		signed
-#define	DOTS		, ...
-
-#define	EXFUN(name, proto)		name proto
-#define	DEFUN(name, arglist, args)	name(args)
-#define	DEFUN_VOID(name)		name(void)
-
-#define PROTO(type, name, arglist)	type name arglist
-#define PARAMS(paramlist)		paramlist
-#define ANSI_PROTOTYPES			1
-
-#else	/* Not ANSI C.  */
-
-#define	PTR		char *
-#define	PTRCONST	PTR
-#define	LONG_DOUBLE	double
-
-#define	AND		;
-#define	NOARGS
-#define	CONST
-#ifndef const /* some systems define it in header files for non-ansi mode */
-#define	const
-#endif
-#define	VOLATILE
-#define	SIGNED
-#define	DOTS
-
-#define	EXFUN(name, proto)		name()
-#define	DEFUN(name, arglist, args)	name arglist args;
-#define	DEFUN_VOID(name)		name()
-#define PROTO(type, name, arglist) type name ()
-#define PARAMS(paramlist)		()
-
-#endif	/* ANSI C.  */
-
-#endif	/* ansidecl.h	*/
diff --git a/arch/ppc/xmon/nonstdio.h b/arch/ppc/xmon/nonstdio.h
deleted file mode 100644
index 0240bc573c96..000000000000
--- a/arch/ppc/xmon/nonstdio.h
+++ /dev/null
@@ -1,22 +0,0 @@
-typedef int	FILE;
-extern FILE *xmon_stdin, *xmon_stdout;
-#define EOF	(-1)
-#define stdin	xmon_stdin
-#define stdout	xmon_stdout
-#define printf	xmon_printf
-#define fprintf	xmon_fprintf
-#define fputs	xmon_fputs
-#define fgets	xmon_fgets
-#define putchar	xmon_putchar
-#define getchar	xmon_getchar
-#define putc	xmon_putc
-#define getc	xmon_getc
-#define fopen(n, m)	NULL
-#define fflush(f)	do {} while (0)
-#define fclose(f)	do {} while (0)
-extern char *fgets(char *, int, void *);
-extern void xmon_fprintf(void *, const char *, ...);
-extern void xmon_sprintf(char *, const char *, ...);
-extern void xmon_puts(char*);
-
-#define perror(s)	printf("%s: no files!\n", (s))
diff --git a/arch/ppc/xmon/ppc-dis.c b/arch/ppc/xmon/ppc-dis.c
deleted file mode 100644
index 798ac1a677f6..000000000000
--- a/arch/ppc/xmon/ppc-dis.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/* ppc-dis.c -- Disassemble PowerPC instructions
-   Copyright 1994 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-2, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include "nonstdio.h"
-#include "ansidecl.h"
-#include "ppc.h"
-
-static int print_insn_powerpc PARAMS ((FILE *, unsigned long insn,
-				       unsigned memaddr, int dialect));
-
-extern void print_address PARAMS((unsigned memaddr));
-
-/* Print a big endian PowerPC instruction.  For convenience, also
-   disassemble instructions supported by the Motorola PowerPC 601.  */
-
-int
-print_insn_big_powerpc (FILE *out, unsigned long insn, unsigned memaddr)
-{
-  return print_insn_powerpc (out, insn, memaddr,
-			     PPC_OPCODE_PPC | PPC_OPCODE_601);
-}
-
-/* Print a PowerPC or POWER instruction.  */
-
-static int
-print_insn_powerpc (FILE *out, unsigned long insn, unsigned memaddr,
-		    int dialect)
-{
-  const struct powerpc_opcode *opcode;
-  const struct powerpc_opcode *opcode_end;
-  unsigned long op;
-
-  /* Get the major opcode of the instruction.  */
-  op = PPC_OP (insn);
-
-  /* Find the first match in the opcode table.  We could speed this up
-     a bit by doing a binary search on the major opcode.  */
-  opcode_end = powerpc_opcodes + powerpc_num_opcodes;
-  for (opcode = powerpc_opcodes; opcode < opcode_end; opcode++)
-    {
-      unsigned long table_op;
-      const unsigned char *opindex;
-      const struct powerpc_operand *operand;
-      int invalid;
-      int need_comma;
-      int need_paren;
-
-      table_op = PPC_OP (opcode->opcode);
-      if (op < table_op)
-		break;
-      if (op > table_op)
-		continue;
-
-      if ((insn & opcode->mask) != opcode->opcode
-	  || (opcode->flags & dialect) == 0)
-		continue;
-
-      /* Make two passes over the operands.  First see if any of them
-		 have extraction functions, and, if they do, make sure the
-		 instruction is valid.  */
-      invalid = 0;
-      for (opindex = opcode->operands; *opindex != 0; opindex++)
-		{
-		  operand = powerpc_operands + *opindex;
-		  if (operand->extract)
-		    (*operand->extract) (insn, &invalid);
-		}
-      if (invalid)
-		continue;
-
-      /* The instruction is valid.  */
-      fprintf(out, "%s", opcode->name);
-      if (opcode->operands[0] != 0)
-		fprintf(out, "\t");
-
-      /* Now extract and print the operands.  */
-      need_comma = 0;
-      need_paren = 0;
-      for (opindex = opcode->operands; *opindex != 0; opindex++)
-		{
-		  long value;
-
-		  operand = powerpc_operands + *opindex;
-
-		  /* Operands that are marked FAKE are simply ignored.  We
-		     already made sure that the extract function considered
-		     the instruction to be valid.  */
-		  if ((operand->flags & PPC_OPERAND_FAKE) != 0)
-		    continue;
-
-		  /* Extract the value from the instruction.  */
-		  if (operand->extract)
-		    value = (*operand->extract) (insn, (int *) 0);
-		  else
-		    {
-		      value = (insn >> operand->shift) & ((1 << operand->bits) - 1);
-		      if ((operand->flags & PPC_OPERAND_SIGNED) != 0
-			  && (value & (1 << (operand->bits - 1))) != 0)
-			value -= 1 << operand->bits;
-		    }
-
-		  /* If the operand is optional, and the value is zero, don't
-		     print anything.  */
-		  if ((operand->flags & PPC_OPERAND_OPTIONAL) != 0
-		      && (operand->flags & PPC_OPERAND_NEXT) == 0
-		      && value == 0)
-		    continue;
-
-		  if (need_comma)
-		    {
-		      fprintf(out, ",");
-		      need_comma = 0;
-		    }
-
-		  /* Print the operand as directed by the flags.  */
-		  if ((operand->flags & PPC_OPERAND_GPR) != 0)
-		    fprintf(out, "r%ld", value);
-		  else if ((operand->flags & PPC_OPERAND_FPR) != 0)
-		    fprintf(out, "f%ld", value);
-		  else if ((operand->flags & PPC_OPERAND_RELATIVE) != 0)
-		    print_address (memaddr + value);
-		  else if ((operand->flags & PPC_OPERAND_ABSOLUTE) != 0)
-		    print_address (value & 0xffffffff);
-		  else if ((operand->flags & PPC_OPERAND_CR) == 0
-			   || (dialect & PPC_OPCODE_PPC) == 0)
-		    fprintf(out, "%ld", value);
-		  else
-		    {
-		      if (operand->bits == 3)
-				fprintf(out, "cr%d", value);
-		      else
-			{
-			  static const char *cbnames[4] = { "lt", "gt", "eq", "so" };
-			  int cr;
-			  int cc;
-
-			  cr = value >> 2;
-			  if (cr != 0)
-			    fprintf(out, "4*cr%d", cr);
-			  cc = value & 3;
-			  if (cc != 0)
-			    {
-			      if (cr != 0)
-					fprintf(out, "+");
-			      fprintf(out, "%s", cbnames[cc]);
-			    }
-			}
-	    }
-
-	  if (need_paren)
-	    {
-	      fprintf(out, ")");
-	      need_paren = 0;
-	    }
-
-	  if ((operand->flags & PPC_OPERAND_PARENS) == 0)
-	    need_comma = 1;
-	  else
-	    {
-	      fprintf(out, "(");
-	      need_paren = 1;
-	    }
-	}
-
-      /* We have found and printed an instruction; return.  */
-      return 4;
-    }
-
-  /* We could not find a match.  */
-  fprintf(out, ".long 0x%lx", insn);
-
-  return 4;
-}
diff --git a/arch/ppc/xmon/ppc-opc.c b/arch/ppc/xmon/ppc-opc.c
deleted file mode 100644
index 034313cef6e7..000000000000
--- a/arch/ppc/xmon/ppc-opc.c
+++ /dev/null
@@ -1,2720 +0,0 @@
-/* ppc-opc.c -- PowerPC opcode list
-   Copyright 1994 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-2, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <linux/posix_types.h>
-#include <linux/kernel.h>
-#include "ansidecl.h"
-#include "ppc.h"
-
-/* This file holds the PowerPC opcode table.  The opcode table
-   includes almost all of the extended instruction mnemonics.  This
-   permits the disassembler to use them, and simplifies the assembler
-   logic, at the cost of increasing the table size.  The table is
-   strictly constant data, so the compiler should be able to put it in
-   the .text section.
-
-   This file also holds the operand table.  All knowledge about
-   inserting operands into instructions and vice-versa is kept in this
-   file.  */
-
-/* Local insertion and extraction functions.  */
-
-static unsigned long insert_bat PARAMS ((unsigned long, long, const char **));
-static long extract_bat PARAMS ((unsigned long, int *));
-static unsigned long insert_bba PARAMS ((unsigned long, long, const char **));
-static long extract_bba PARAMS ((unsigned long, int *));
-static unsigned long insert_bd PARAMS ((unsigned long, long, const char **));
-static long extract_bd PARAMS ((unsigned long, int *));
-static unsigned long insert_bdm PARAMS ((unsigned long, long, const char **));
-static long extract_bdm PARAMS ((unsigned long, int *));
-static unsigned long insert_bdp PARAMS ((unsigned long, long, const char **));
-static long extract_bdp PARAMS ((unsigned long, int *));
-static unsigned long insert_bo PARAMS ((unsigned long, long, const char **));
-static long extract_bo PARAMS ((unsigned long, int *));
-static unsigned long insert_boe PARAMS ((unsigned long, long, const char **));
-static long extract_boe PARAMS ((unsigned long, int *));
-static unsigned long insert_ds PARAMS ((unsigned long, long, const char **));
-static long extract_ds PARAMS ((unsigned long, int *));
-static unsigned long insert_li PARAMS ((unsigned long, long, const char **));
-static long extract_li PARAMS ((unsigned long, int *));
-static unsigned long insert_mbe PARAMS ((unsigned long, long, const char **));
-static long extract_mbe PARAMS ((unsigned long, int *));
-static unsigned long insert_mb6 PARAMS ((unsigned long, long, const char **));
-static long extract_mb6 PARAMS ((unsigned long, int *));
-static unsigned long insert_nb PARAMS ((unsigned long, long, const char **));
-static long extract_nb PARAMS ((unsigned long, int *));
-static unsigned long insert_nsi PARAMS ((unsigned long, long, const char **));
-static long extract_nsi PARAMS ((unsigned long, int *));
-static unsigned long insert_ral PARAMS ((unsigned long, long, const char **));
-static unsigned long insert_ram PARAMS ((unsigned long, long, const char **));
-static unsigned long insert_ras PARAMS ((unsigned long, long, const char **));
-static unsigned long insert_rbs PARAMS ((unsigned long, long, const char **));
-static long extract_rbs PARAMS ((unsigned long, int *));
-static unsigned long insert_sh6 PARAMS ((unsigned long, long, const char **));
-static long extract_sh6 PARAMS ((unsigned long, int *));
-static unsigned long insert_spr PARAMS ((unsigned long, long, const char **));
-static long extract_spr PARAMS ((unsigned long, int *));
-static unsigned long insert_tbr PARAMS ((unsigned long, long, const char **));
-static long extract_tbr PARAMS ((unsigned long, int *));
-
-/* The operands table.
-
-   The fields are bits, shift, signed, insert, extract, flags.  */
-
-const struct powerpc_operand powerpc_operands[] =
-{
-  /* The zero index is used to indicate the end of the list of
-     operands.  */
-#define UNUSED (0)
-  { 0, 0, NULL, NULL, 0 },
-
-  /* The BA field in an XL form instruction.  */
-#define BA (1)
-#define BA_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BA field in an XL form instruction when it must be the same
-     as the BT field in the same instruction.  */
-#define BAT (2)
-  { 5, 16, insert_bat, extract_bat, PPC_OPERAND_FAKE },
-
-  /* The BB field in an XL form instruction.  */
-#define BB (3)
-#define BB_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BB field in an XL form instruction when it must be the same
-     as the BA field in the same instruction.  */
-#define BBA (4)
-  { 5, 11, insert_bba, extract_bba, PPC_OPERAND_FAKE },
-
-  /* The BD field in a B form instruction.  The lower two bits are
-     forced to zero.  */
-#define BD (5)
-  { 16, 0, insert_bd, extract_bd, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when absolute addressing is
-     used.  */
-#define BDA (6)
-  { 16, 0, insert_bd, extract_bd, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the - modifier is used.
-     This sets the y bit of the BO field appropriately.  */
-#define BDM (7)
-  { 16, 0, insert_bdm, extract_bdm,
-      PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the - modifier is used
-     and absolute address is used.  */
-#define BDMA (8)
-  { 16, 0, insert_bdm, extract_bdm,
-      PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the + modifier is used.
-     This sets the y bit of the BO field appropriately.  */
-#define BDP (9)
-  { 16, 0, insert_bdp, extract_bdp,
-      PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the + modifier is used
-     and absolute addressing is used.  */
-#define BDPA (10)
-  { 16, 0, insert_bdp, extract_bdp,
-      PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The BF field in an X or XL form instruction.  */
-#define BF (11)
-  { 3, 23, NULL, NULL, PPC_OPERAND_CR },
-
-  /* An optional BF field.  This is used for comparison instructions,
-     in which an omitted BF field is taken as zero.  */
-#define OBF (12)
-  { 3, 23, NULL, NULL, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL },
-
-  /* The BFA field in an X or XL form instruction.  */
-#define BFA (13)
-  { 3, 18, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BI field in a B form or XL form instruction.  */
-#define BI (14)
-#define BI_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BO field in a B form instruction.  Certain values are
-     illegal.  */
-#define BO (15)
-#define BO_MASK (0x1f << 21)
-  { 5, 21, insert_bo, extract_bo, 0 },
-
-  /* The BO field in a B form instruction when the + or - modifier is
-     used.  This is like the BO field, but it must be even.  */
-#define BOE (16)
-  { 5, 21, insert_boe, extract_boe, 0 },
-
-  /* The BT field in an X or XL form instruction.  */
-#define BT (17)
-  { 5, 21, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The condition register number portion of the BI field in a B form
-     or XL form instruction.  This is used for the extended
-     conditional branch mnemonics, which set the lower two bits of the
-     BI field.  This field is optional.  */
-#define CR (18)
-  { 3, 18, NULL, NULL, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL },
-
-  /* The D field in a D form instruction.  This is a displacement off
-     a register, and implies that the next operand is a register in
-     parentheses.  */
-#define D (19)
-  { 16, 0, NULL, NULL, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED },
-
-  /* The DS field in a DS form instruction.  This is like D, but the
-     lower two bits are forced to zero.  */
-#define DS (20)
-  { 16, 0, insert_ds, extract_ds, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED },
-
-  /* The FL1 field in a POWER SC form instruction.  */
-#define FL1 (21)
-  { 4, 12, NULL, NULL, 0 },
-
-  /* The FL2 field in a POWER SC form instruction.  */
-#define FL2 (22)
-  { 3, 2, NULL, NULL, 0 },
-
-  /* The FLM field in an XFL form instruction.  */
-#define FLM (23)
-  { 8, 17, NULL, NULL, 0 },
-
-  /* The FRA field in an X or A form instruction.  */
-#define FRA (24)
-#define FRA_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FRB field in an X or A form instruction.  */
-#define FRB (25)
-#define FRB_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FRC field in an A form instruction.  */
-#define FRC (26)
-#define FRC_MASK (0x1f << 6)
-  { 5, 6, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FRS field in an X form instruction or the FRT field in a D, X
-     or A form instruction.  */
-#define FRS (27)
-#define FRT (FRS)
-  { 5, 21, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FXM field in an XFX instruction.  */
-#define FXM (28)
-#define FXM_MASK (0xff << 12)
-  { 8, 12, NULL, NULL, 0 },
-
-  /* The L field in a D or X form instruction.  */
-#define L (29)
-  { 1, 21, NULL, NULL, PPC_OPERAND_OPTIONAL },
-
-  /* The LEV field in a POWER SC form instruction.  */
-#define LEV (30)
-  { 7, 5, NULL, NULL, 0 },
-
-  /* The LI field in an I form instruction.  The lower two bits are
-     forced to zero.  */
-#define LI (31)
-  { 26, 0, insert_li, extract_li, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The LI field in an I form instruction when used as an absolute
-     address.  */
-#define LIA (32)
-  { 26, 0, insert_li, extract_li, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The MB field in an M form instruction.  */
-#define MB (33)
-#define MB_MASK (0x1f << 6)
-  { 5, 6, NULL, NULL, 0 },
-
-  /* The ME field in an M form instruction.  */
-#define ME (34)
-#define ME_MASK (0x1f << 1)
-  { 5, 1, NULL, NULL, 0 },
-
-  /* The MB and ME fields in an M form instruction expressed a single
-     operand which is a bitmask indicating which bits to select.  This
-     is a two operand form using PPC_OPERAND_NEXT.  See the
-     description in opcode/ppc.h for what this means.  */
-#define MBE (35)
-  { 5, 6, NULL, NULL, PPC_OPERAND_OPTIONAL | PPC_OPERAND_NEXT },
-  { 32, 0, insert_mbe, extract_mbe, 0 },
-
-  /* The MB or ME field in an MD or MDS form instruction.  The high
-     bit is wrapped to the low end.  */
-#define MB6 (37)
-#define ME6 (MB6)
-#define MB6_MASK (0x3f << 5)
-  { 6, 5, insert_mb6, extract_mb6, 0 },
-
-  /* The NB field in an X form instruction.  The value 32 is stored as
-     0.  */
-#define NB (38)
-  { 6, 11, insert_nb, extract_nb, 0 },
-
-  /* The NSI field in a D form instruction.  This is the same as the
-     SI field, only negated.  */
-#define NSI (39)
-  { 16, 0, insert_nsi, extract_nsi,
-      PPC_OPERAND_NEGATIVE | PPC_OPERAND_SIGNED },
-
-  /* The RA field in an D, DS, X, XO, M, or MDS form instruction.  */
-#define RA (40)
-#define RA_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_GPR },
-
-  /* The RA field in a D or X form instruction which is an updating
-     load, which means that the RA field may not be zero and may not
-     equal the RT field.  */
-#define RAL (41)
-  { 5, 16, insert_ral, NULL, PPC_OPERAND_GPR },
-
-  /* The RA field in an lmw instruction, which has special value
-     restrictions.  */
-#define RAM (42)
-  { 5, 16, insert_ram, NULL, PPC_OPERAND_GPR },
-
-  /* The RA field in a D or X form instruction which is an updating
-     store or an updating floating point load, which means that the RA
-     field may not be zero.  */
-#define RAS (43)
-  { 5, 16, insert_ras, NULL, PPC_OPERAND_GPR },
-
-  /* The RB field in an X, XO, M, or MDS form instruction.  */
-#define RB (44)
-#define RB_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, PPC_OPERAND_GPR },
-
-  /* The RB field in an X form instruction when it must be the same as
-     the RS field in the instruction.  This is used for extended
-     mnemonics like mr.  */
-#define RBS (45)
-  { 5, 1, insert_rbs, extract_rbs, PPC_OPERAND_FAKE },
-
-  /* The RS field in a D, DS, X, XFX, XS, M, MD or MDS form
-     instruction or the RT field in a D, DS, X, XFX or XO form
-     instruction.  */
-#define RS (46)
-#define RT (RS)
-#define RT_MASK (0x1f << 21)
-  { 5, 21, NULL, NULL, PPC_OPERAND_GPR },
-
-  /* The SH field in an X or M form instruction.  */
-#define SH (47)
-#define SH_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, 0 },
-
-  /* The SH field in an MD form instruction.  This is split.  */
-#define SH6 (48)
-#define SH6_MASK ((0x1f << 11) | (1 << 1))
-  { 6, 1, insert_sh6, extract_sh6, 0 },
-
-  /* The SI field in a D form instruction.  */
-#define SI (49)
-  { 16, 0, NULL, NULL, PPC_OPERAND_SIGNED },
-
-  /* The SI field in a D form instruction when we accept a wide range
-     of positive values.  */
-#define SISIGNOPT (50)
-  { 16, 0, NULL, NULL, PPC_OPERAND_SIGNED | PPC_OPERAND_SIGNOPT },
-
-  /* The SPR field in an XFX form instruction.  This is flipped--the
-     lower 5 bits are stored in the upper 5 and vice- versa.  */
-#define SPR (51)
-#define SPR_MASK (0x3ff << 11)
-  { 10, 11, insert_spr, extract_spr, 0 },
-
-  /* The BAT index number in an XFX form m[ft]ibat[lu] instruction.  */
-#define SPRBAT (52)
-#define SPRBAT_MASK (0x3 << 17)
-  { 2, 17, NULL, NULL, 0 },
-
-  /* The SPRG register number in an XFX form m[ft]sprg instruction.  */
-#define SPRG (53)
-#define SPRG_MASK (0x3 << 16)
-  { 2, 16, NULL, NULL, 0 },
-
-  /* The SR field in an X form instruction.  */
-#define SR (54)
-  { 4, 16, NULL, NULL, 0 },
-
-  /* The SV field in a POWER SC form instruction.  */
-#define SV (55)
-  { 14, 2, NULL, NULL, 0 },
-
-  /* The TBR field in an XFX form instruction.  This is like the SPR
-     field, but it is optional.  */
-#define TBR (56)
-  { 10, 11, insert_tbr, extract_tbr, PPC_OPERAND_OPTIONAL },
-
-  /* The TO field in a D or X form instruction.  */
-#define TO (57)
-#define TO_MASK (0x1f << 21)
-  { 5, 21, NULL, NULL, 0 },
-
-  /* The U field in an X form instruction.  */
-#define U (58)
-  { 4, 12, NULL, NULL, 0 },
-
-  /* The UI field in a D form instruction.  */
-#define UI (59)
-  { 16, 0, NULL, NULL, 0 },
-};
-
-/* The functions used to insert and extract complicated operands.  */
-
-/* The BA field in an XL form instruction when it must be the same as
-   the BT field in the same instruction.  This operand is marked FAKE.
-   The insertion function just copies the BT field into the BA field,
-   and the extraction function just checks that the fields are the
-   same.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bat(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (((insn >> 21) & 0x1f) << 16);
-}
-
-static long
-extract_bat(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn >> 21) & 0x1f) != ((insn >> 16) & 0x1f))
-    *invalid = 1;
-  return 0;
-}
-
-/* The BB field in an XL form instruction when it must be the same as
-   the BA field in the same instruction.  This operand is marked FAKE.
-   The insertion function just copies the BA field into the BB field,
-   and the extraction function just checks that the fields are the
-   same.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bba(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (((insn >> 16) & 0x1f) << 11);
-}
-
-static long
-extract_bba(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn >> 16) & 0x1f) != ((insn >> 11) & 0x1f))
-    *invalid = 1;
-  return 0;
-}
-
-/* The BD field in a B form instruction.  The lower two bits are
-   forced to zero.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bd(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (value & 0xfffc);
-}
-
-/*ARGSUSED*/
-static long
-extract_bd(unsigned long insn, int *invalid)
-{
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* The BD field in a B form instruction when the - modifier is used.
-   This modifier means that the branch is not expected to be taken.
-   We must set the y bit of the BO field to 1 if the offset is
-   negative.  When extracting, we require that the y bit be 1 and that
-   the offset be positive, since if the y bit is 0 we just want to
-   print the normal form of the instruction.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bdm(unsigned long insn, long value, const char **errmsg)
-{
-  if ((value & 0x8000) != 0)
-    insn |= 1 << 21;
-  return insn | (value & 0xfffc);
-}
-
-static long
-extract_bdm(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn & (1 << 21)) == 0
-	  || (insn & (1 << 15)) == 0))
-    *invalid = 1;
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* The BD field in a B form instruction when the + modifier is used.
-   This is like BDM, above, except that the branch is expected to be
-   taken.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bdp(unsigned long insn, long value, const char **errmsg)
-{
-  if ((value & 0x8000) == 0)
-    insn |= 1 << 21;
-  return insn | (value & 0xfffc);
-}
-
-static long
-extract_bdp(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn & (1 << 21)) == 0
-	  || (insn & (1 << 15)) != 0))
-    *invalid = 1;
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* Check for legal values of a BO field.  */
-
-static int
-valid_bo (long value)
-{
-  /* Certain encodings have bits that are required to be zero.  These
-     are (z must be zero, y may be anything):
-         001zy
-	 011zy
-	 1z00y
-	 1z01y
-	 1z1zz
-     */
-  switch (value & 0x14)
-    {
-    default:
-    case 0:
-      return 1;
-    case 0x4:
-      return (value & 0x2) == 0;
-    case 0x10:
-      return (value & 0x8) == 0;
-    case 0x14:
-      return value == 0x14;
-    }
-}
-
-/* The BO field in a B form instruction.  Warn about attempts to set
-   the field to an illegal value.  */
-
-static unsigned long
-insert_bo(unsigned long insn, long value, const char **errmsg)
-{
-  if (errmsg != (const char **) NULL
-      && ! valid_bo (value))
-    *errmsg = "invalid conditional option";
-  return insn | ((value & 0x1f) << 21);
-}
-
-static long
-extract_bo(unsigned long insn, int *invalid)
-{
-  long value;
-
-  value = (insn >> 21) & 0x1f;
-  if (invalid != (int *) NULL
-      && ! valid_bo (value))
-    *invalid = 1;
-  return value;
-}
-
-/* The BO field in a B form instruction when the + or - modifier is
-   used.  This is like the BO field, but it must be even.  When
-   extracting it, we force it to be even.  */
-
-static unsigned long
-insert_boe(unsigned long insn, long value, const char **errmsg)
-{
-  if (errmsg != (const char **) NULL)
-    {
-      if (! valid_bo (value))
-	*errmsg = "invalid conditional option";
-      else if ((value & 1) != 0)
-	*errmsg = "attempt to set y bit when using + or - modifier";
-    }
-  return insn | ((value & 0x1f) << 21);
-}
-
-static long
-extract_boe(unsigned long insn, int *invalid)
-{
-  long value;
-
-  value = (insn >> 21) & 0x1f;
-  if (invalid != (int *) NULL
-      && ! valid_bo (value))
-    *invalid = 1;
-  return value & 0x1e;
-}
-
-/* The DS field in a DS form instruction.  This is like D, but the
-   lower two bits are forced to zero.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_ds(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (value & 0xfffc);
-}
-
-/*ARGSUSED*/
-static long
-extract_ds(unsigned long insn, int *invalid)
-{
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* The LI field in an I form instruction.  The lower two bits are
-   forced to zero.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_li(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (value & 0x3fffffc);
-}
-
-/*ARGSUSED*/
-static long
-extract_li(unsigned long insn, int *invalid)
-{
-  if ((insn & 0x2000000) != 0)
-    return (insn & 0x3fffffc) - 0x4000000;
-  else
-    return insn & 0x3fffffc;
-}
-
-/* The MB and ME fields in an M form instruction expressed as a single
-   operand which is itself a bitmask.  The extraction function always
-   marks it as invalid, since we never want to recognize an
-   instruction which uses a field of this type.  */
-
-static unsigned long
-insert_mbe(unsigned long insn, long value, const char **errmsg)
-{
-  unsigned long uval;
-  int mb, me;
-
-  uval = value;
-
-  if (uval == 0)
-    {
-      if (errmsg != (const char **) NULL)
-	*errmsg = "illegal bitmask";
-      return insn;
-    }
-
-  me = 31;
-  while ((uval & 1) == 0)
-    {
-      uval >>= 1;
-      --me;
-    }
-
-  mb = me;
-  uval >>= 1;
-  while ((uval & 1) != 0)
-    {
-      uval >>= 1;
-      --mb;
-    }
-
-  if (uval != 0)
-    {
-      if (errmsg != (const char **) NULL)
-	*errmsg = "illegal bitmask";
-    }
-
-  return insn | (mb << 6) | (me << 1);
-}
-
-static long
-extract_mbe(unsigned long insn, int *invalid)
-{
-  long ret;
-  int mb, me;
-  int i;
-
-  if (invalid != (int *) NULL)
-    *invalid = 1;
-
-  ret = 0;
-  mb = (insn >> 6) & 0x1f;
-  me = (insn >> 1) & 0x1f;
-  for (i = mb; i < me; i++)
-    ret |= 1 << (31 - i);
-  return ret;
-}
-
-/* The MB or ME field in an MD or MDS form instruction.  The high bit
-   is wrapped to the low end.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_mb6(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((value & 0x1f) << 6) | (value & 0x20);
-}
-
-/*ARGSUSED*/
-static long
-extract_mb6(unsigned long insn, int *invalid)
-{
-  return ((insn >> 6) & 0x1f) | (insn & 0x20);
-}
-
-/* The NB field in an X form instruction.  The value 32 is stored as
-   0.  */
-
-static unsigned long
-insert_nb(unsigned long insn, long value, const char **errmsg)
-{
-  if (value < 0 || value > 32)
-    *errmsg = "value out of range";
-  if (value == 32)
-    value = 0;
-  return insn | ((value & 0x1f) << 11);
-}
-
-/*ARGSUSED*/
-static long
-extract_nb(unsigned long insn, int *invalid)
-{
-  long ret;
-
-  ret = (insn >> 11) & 0x1f;
-  if (ret == 0)
-    ret = 32;
-  return ret;
-}
-
-/* The NSI field in a D form instruction.  This is the same as the SI
-   field, only negated.  The extraction function always marks it as
-   invalid, since we never want to recognize an instruction which uses
-   a field of this type.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_nsi(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((- value) & 0xffff);
-}
-
-static long
-extract_nsi(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL)
-    *invalid = 1;
-  if ((insn & 0x8000) != 0)
-    return - ((insn & 0xffff) - 0x10000);
-  else
-    return - (insn & 0xffff);
-}
-
-/* The RA field in a D or X form instruction which is an updating
-   load, which means that the RA field may not be zero and may not
-   equal the RT field.  */
-
-static unsigned long
-insert_ral(unsigned long insn, long value, const char **errmsg)
-{
-  if (value == 0
-      || value == ((insn >> 21) & 0x1f))
-    *errmsg = "invalid register operand when updating";
-  return insn | ((value & 0x1f) << 16);
-}
-
-/* The RA field in an lmw instruction, which has special value
-   restrictions.  */
-
-static unsigned long
-insert_ram(unsigned long insn, long value, const char **errmsg)
-{
-  if (value >= ((insn >> 21) & 0x1f))
-    *errmsg = "index register in load range";
-  return insn | ((value & 0x1f) << 16);
-}
-
-/* The RA field in a D or X form instruction which is an updating
-   store or an updating floating point load, which means that the RA
-   field may not be zero.  */
-
-static unsigned long
-insert_ras(unsigned long insn, long value, const char **errmsg)
-{
-  if (value == 0)
-    *errmsg = "invalid register operand when updating";
-  return insn | ((value & 0x1f) << 16);
-}
-
-/* The RB field in an X form instruction when it must be the same as
-   the RS field in the instruction.  This is used for extended
-   mnemonics like mr.  This operand is marked FAKE.  The insertion
-   function just copies the BT field into the BA field, and the
-   extraction function just checks that the fields are the same.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_rbs(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (((insn >> 21) & 0x1f) << 11);
-}
-
-static long
-extract_rbs(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn >> 21) & 0x1f) != ((insn >> 11) & 0x1f))
-    *invalid = 1;
-  return 0;
-}
-
-/* The SH field in an MD form instruction.  This is split.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_sh6(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((value & 0x1f) << 11) | ((value & 0x20) >> 4);
-}
-
-/*ARGSUSED*/
-static long
-extract_sh6(unsigned long insn, int *invalid)
-{
-  return ((insn >> 11) & 0x1f) | ((insn << 4) & 0x20);
-}
-
-/* The SPR field in an XFX form instruction.  This is flipped--the
-   lower 5 bits are stored in the upper 5 and vice- versa.  */
-
-static unsigned long
-insert_spr(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((value & 0x1f) << 16) | ((value & 0x3e0) << 6);
-}
-
-static long
-extract_spr(unsigned long insn, int *invalid)
-{
-  return ((insn >> 16) & 0x1f) | ((insn >> 6) & 0x3e0);
-}
-
-/* The TBR field in an XFX instruction.  This is just like SPR, but it
-   is optional.  When TBR is omitted, it must be inserted as 268 (the
-   magic number of the TB register).  These functions treat 0
-   (indicating an omitted optional operand) as 268.  This means that
-   ``mftb 4,0'' is not handled correctly.  This does not matter very
-   much, since the architecture manual does not define mftb as
-   accepting any values other than 268 or 269.  */
-
-#define TB (268)
-
-static unsigned long
-insert_tbr(unsigned long insn, long value, const char **errmsg)
-{
-  if (value == 0)
-    value = TB;
-  return insn | ((value & 0x1f) << 16) | ((value & 0x3e0) << 6);
-}
-
-static long
-extract_tbr(unsigned long insn, int *invalid)
-{
-  long ret;
-
-  ret = ((insn >> 16) & 0x1f) | ((insn >> 6) & 0x3e0);
-  if (ret == TB)
-    ret = 0;
-  return ret;
-}
-
-/* Macros used to form opcodes.  */
-
-/* The main opcode.  */
-#define OP(x) (((x) & 0x3f) << 26)
-#define OP_MASK OP (0x3f)
-
-/* The main opcode combined with a trap code in the TO field of a D
-   form instruction.  Used for extended mnemonics for the trap
-   instructions.  */
-#define OPTO(x,to) (OP (x) | (((to) & 0x1f) << 21))
-#define OPTO_MASK (OP_MASK | TO_MASK)
-
-/* The main opcode combined with a comparison size bit in the L field
-   of a D form or X form instruction.  Used for extended mnemonics for
-   the comparison instructions.  */
-#define OPL(x,l) (OP (x) | (((l) & 1) << 21))
-#define OPL_MASK OPL (0x3f,1)
-
-/* An A form instruction.  */
-#define A(op, xop, rc) (OP (op) | (((xop) & 0x1f) << 1) | ((rc) & 1))
-#define A_MASK A (0x3f, 0x1f, 1)
-
-/* An A_MASK with the FRB field fixed.  */
-#define AFRB_MASK (A_MASK | FRB_MASK)
-
-/* An A_MASK with the FRC field fixed.  */
-#define AFRC_MASK (A_MASK | FRC_MASK)
-
-/* An A_MASK with the FRA and FRC fields fixed.  */
-#define AFRAFRC_MASK (A_MASK | FRA_MASK | FRC_MASK)
-
-/* A B form instruction.  */
-#define B(op, aa, lk) (OP (op) | (((aa) & 1) << 1) | ((lk) & 1))
-#define B_MASK B (0x3f, 1, 1)
-
-/* A B form instruction setting the BO field.  */
-#define BBO(op, bo, aa, lk) (B ((op), (aa), (lk)) | (((bo) & 0x1f) << 21))
-#define BBO_MASK BBO (0x3f, 0x1f, 1, 1)
-
-/* A BBO_MASK with the y bit of the BO field removed.  This permits
-   matching a conditional branch regardless of the setting of the y
-   bit.  */
-#define Y_MASK (1 << 21)
-#define BBOY_MASK (BBO_MASK &~ Y_MASK)
-
-/* A B form instruction setting the BO field and the condition bits of
-   the BI field.  */
-#define BBOCB(op, bo, cb, aa, lk) \
-  (BBO ((op), (bo), (aa), (lk)) | (((cb) & 0x3) << 16))
-#define BBOCB_MASK BBOCB (0x3f, 0x1f, 0x3, 1, 1)
-
-/* A BBOCB_MASK with the y bit of the BO field removed.  */
-#define BBOYCB_MASK (BBOCB_MASK &~ Y_MASK)
-
-/* A BBOYCB_MASK in which the BI field is fixed.  */
-#define BBOYBI_MASK (BBOYCB_MASK | BI_MASK)
-
-/* The main opcode mask with the RA field clear.  */
-#define DRA_MASK (OP_MASK | RA_MASK)
-
-/* A DS form instruction.  */
-#define DSO(op, xop) (OP (op) | ((xop) & 0x3))
-#define DS_MASK DSO (0x3f, 3)
-
-/* An M form instruction.  */
-#define M(op, rc) (OP (op) | ((rc) & 1))
-#define M_MASK M (0x3f, 1)
-
-/* An M form instruction with the ME field specified.  */
-#define MME(op, me, rc) (M ((op), (rc)) | (((me) & 0x1f) << 1))
-
-/* An M_MASK with the MB and ME fields fixed.  */
-#define MMBME_MASK (M_MASK | MB_MASK | ME_MASK)
-
-/* An M_MASK with the SH and ME fields fixed.  */
-#define MSHME_MASK (M_MASK | SH_MASK | ME_MASK)
-
-/* An MD form instruction.  */
-#define MD(op, xop, rc) (OP (op) | (((xop) & 0x7) << 2) | ((rc) & 1))
-#define MD_MASK MD (0x3f, 0x7, 1)
-
-/* An MD_MASK with the MB field fixed.  */
-#define MDMB_MASK (MD_MASK | MB6_MASK)
-
-/* An MD_MASK with the SH field fixed.  */
-#define MDSH_MASK (MD_MASK | SH6_MASK)
-
-/* An MDS form instruction.  */
-#define MDS(op, xop, rc) (OP (op) | (((xop) & 0xf) << 1) | ((rc) & 1))
-#define MDS_MASK MDS (0x3f, 0xf, 1)
-
-/* An MDS_MASK with the MB field fixed.  */
-#define MDSMB_MASK (MDS_MASK | MB6_MASK)
-
-/* An SC form instruction.  */
-#define SC(op, sa, lk) (OP (op) | (((sa) & 1) << 1) | ((lk) & 1))
-#define SC_MASK (OP_MASK | (0x3ff << 16) | (1 << 1) | 1)
-
-/* An X form instruction.  */
-#define X(op, xop) (OP (op) | (((xop) & 0x3ff) << 1))
-
-/* An X form instruction with the RC bit specified.  */
-#define XRC(op, xop, rc) (X ((op), (xop)) | ((rc) & 1))
-
-/* The mask for an X form instruction.  */
-#define X_MASK XRC (0x3f, 0x3ff, 1)
-
-/* An X_MASK with the RA field fixed.  */
-#define XRA_MASK (X_MASK | RA_MASK)
-
-/* An X_MASK with the RB field fixed.  */
-#define XRB_MASK (X_MASK | RB_MASK)
-
-/* An X_MASK with the RT field fixed.  */
-#define XRT_MASK (X_MASK | RT_MASK)
-
-/* An X_MASK with the RA and RB fields fixed.  */
-#define XRARB_MASK (X_MASK | RA_MASK | RB_MASK)
-
-/* An X_MASK with the RT and RA fields fixed.  */
-#define XRTRA_MASK (X_MASK | RT_MASK | RA_MASK)
-
-/* An X form comparison instruction.  */
-#define XCMPL(op, xop, l) (X ((op), (xop)) | (((l) & 1) << 21))
-
-/* The mask for an X form comparison instruction.  */
-#define XCMP_MASK (X_MASK | (1 << 22))
-
-/* The mask for an X form comparison instruction with the L field
-   fixed.  */
-#define XCMPL_MASK (XCMP_MASK | (1 << 21))
-
-/* An X form trap instruction with the TO field specified.  */
-#define XTO(op, xop, to) (X ((op), (xop)) | (((to) & 0x1f) << 21))
-#define XTO_MASK (X_MASK | TO_MASK)
-
-/* An XFL form instruction.  */
-#define XFL(op, xop, rc) (OP (op) | (((xop) & 0x3ff) << 1) | ((rc) & 1))
-#define XFL_MASK (XFL (0x3f, 0x3ff, 1) | (1 << 25) | (1 << 16))
-
-/* An XL form instruction with the LK field set to 0.  */
-#define XL(op, xop) (OP (op) | (((xop) & 0x3ff) << 1))
-
-/* An XL form instruction which uses the LK field.  */
-#define XLLK(op, xop, lk) (XL ((op), (xop)) | ((lk) & 1))
-
-/* The mask for an XL form instruction.  */
-#define XL_MASK XLLK (0x3f, 0x3ff, 1)
-
-/* An XL form instruction which explicitly sets the BO field.  */
-#define XLO(op, bo, xop, lk) \
-  (XLLK ((op), (xop), (lk)) | (((bo) & 0x1f) << 21))
-#define XLO_MASK (XL_MASK | BO_MASK)
-
-/* An XL form instruction which explicitly sets the y bit of the BO
-   field.  */
-#define XLYLK(op, xop, y, lk) (XLLK ((op), (xop), (lk)) | (((y) & 1) << 21))
-#define XLYLK_MASK (XL_MASK | Y_MASK)
-
-/* An XL form instruction which sets the BO field and the condition
-   bits of the BI field.  */
-#define XLOCB(op, bo, cb, xop, lk) \
-  (XLO ((op), (bo), (xop), (lk)) | (((cb) & 3) << 16))
-#define XLOCB_MASK XLOCB (0x3f, 0x1f, 0x3, 0x3ff, 1)
-
-/* An XL_MASK or XLYLK_MASK or XLOCB_MASK with the BB field fixed.  */
-#define XLBB_MASK (XL_MASK | BB_MASK)
-#define XLYBB_MASK (XLYLK_MASK | BB_MASK)
-#define XLBOCBBB_MASK (XLOCB_MASK | BB_MASK)
-
-/* An XL_MASK with the BO and BB fields fixed.  */
-#define XLBOBB_MASK (XL_MASK | BO_MASK | BB_MASK)
-
-/* An XL_MASK with the BO, BI and BB fields fixed.  */
-#define XLBOBIBB_MASK (XL_MASK | BO_MASK | BI_MASK | BB_MASK)
-
-/* An XO form instruction.  */
-#define XO(op, xop, oe, rc) \
-  (OP (op) | (((xop) & 0x1ff) << 1) | (((oe) & 1) << 10) | ((rc) & 1))
-#define XO_MASK XO (0x3f, 0x1ff, 1, 1)
-
-/* An XO_MASK with the RB field fixed.  */
-#define XORB_MASK (XO_MASK | RB_MASK)
-
-/* An XS form instruction.  */
-#define XS(op, xop, rc) (OP (op) | (((xop) & 0x1ff) << 2) | ((rc) & 1))
-#define XS_MASK XS (0x3f, 0x1ff, 1)
-
-/* A mask for the FXM version of an XFX form instruction.  */
-#define XFXFXM_MASK (X_MASK | (1 << 20) | (1 << 11))
-
-/* An XFX form instruction with the FXM field filled in.  */
-#define XFXM(op, xop, fxm) \
-  (X ((op), (xop)) | (((fxm) & 0xff) << 12))
-
-/* An XFX form instruction with the SPR field filled in.  */
-#define XSPR(op, xop, spr) \
-  (X ((op), (xop)) | (((spr) & 0x1f) << 16) | (((spr) & 0x3e0) << 6))
-#define XSPR_MASK (X_MASK | SPR_MASK)
-
-/* An XFX form instruction with the SPR field filled in except for the
-   SPRBAT field.  */
-#define XSPRBAT_MASK (XSPR_MASK &~ SPRBAT_MASK)
-
-/* An XFX form instruction with the SPR field filled in except for the
-   SPRG field.  */
-#define XSPRG_MASK (XSPR_MASK &~ SPRG_MASK)
-
-/* The BO encodings used in extended conditional branch mnemonics.  */
-#define BODNZF	(0x0)
-#define BODNZFP	(0x1)
-#define BODZF	(0x2)
-#define BODZFP	(0x3)
-#define BOF	(0x4)
-#define BOFP	(0x5)
-#define BODNZT	(0x8)
-#define BODNZTP	(0x9)
-#define BODZT	(0xa)
-#define BODZTP	(0xb)
-#define BOT	(0xc)
-#define BOTP	(0xd)
-#define BODNZ	(0x10)
-#define BODNZP	(0x11)
-#define BODZ	(0x12)
-#define BODZP	(0x13)
-#define BOU	(0x14)
-
-/* The BI condition bit encodings used in extended conditional branch
-   mnemonics.  */
-#define CBLT	(0)
-#define CBGT	(1)
-#define CBEQ	(2)
-#define CBSO	(3)
-
-/* The TO encodings used in extended trap mnemonics.  */
-#define TOLGT	(0x1)
-#define TOLLT	(0x2)
-#define TOEQ	(0x4)
-#define TOLGE	(0x5)
-#define TOLNL	(0x5)
-#define TOLLE	(0x6)
-#define TOLNG	(0x6)
-#define TOGT	(0x8)
-#define TOGE	(0xc)
-#define TONL	(0xc)
-#define TOLT	(0x10)
-#define TOLE	(0x14)
-#define TONG	(0x14)
-#define TONE	(0x18)
-#define TOU	(0x1f)
-
-/* Smaller names for the flags so each entry in the opcodes table will
-   fit on a single line.  */
-#undef PPC
-#define PPC PPC_OPCODE_PPC
-#define POWER PPC_OPCODE_POWER
-#define POWER2 PPC_OPCODE_POWER2
-#define B32 PPC_OPCODE_32
-#define B64 PPC_OPCODE_64
-#define M601 PPC_OPCODE_601
-
-/* The opcode table.
-
-   The format of the opcode table is:
-
-   NAME	     OPCODE	MASK		FLAGS		{ OPERANDS }
-
-   NAME is the name of the instruction.
-   OPCODE is the instruction opcode.
-   MASK is the opcode mask; this is used to tell the disassembler
-     which bits in the actual opcode must match OPCODE.
-   FLAGS are flags indicated what processors support the instruction.
-   OPERANDS is the list of operands.
-
-   The disassembler reads the table in order and prints the first
-   instruction which matches, so this table is sorted to put more
-   specific instructions before more general instructions.  It is also
-   sorted by major opcode.  */
-
-const struct powerpc_opcode powerpc_opcodes[] = {
-{ "tdlgti",  OPTO(2,TOLGT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdllti",  OPTO(2,TOLLT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdeqi",   OPTO(2,TOEQ), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlgei",  OPTO(2,TOLGE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlnli",  OPTO(2,TOLNL), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdllei",  OPTO(2,TOLLE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlngi",  OPTO(2,TOLNG), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdgti",   OPTO(2,TOGT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdgei",   OPTO(2,TOGE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdnli",   OPTO(2,TONL), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlti",   OPTO(2,TOLT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlei",   OPTO(2,TOLE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdngi",   OPTO(2,TONG), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdnei",   OPTO(2,TONE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdi",     OP(2),	OP_MASK,	PPC|B64,	{ TO, RA, SI } },
-
-{ "twlgti",  OPTO(3,TOLGT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlgti",   OPTO(3,TOLGT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twllti",  OPTO(3,TOLLT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tllti",   OPTO(3,TOLLT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "tweqi",   OPTO(3,TOEQ), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "teqi",    OPTO(3,TOEQ), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlgei",  OPTO(3,TOLGE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlgei",   OPTO(3,TOLGE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlnli",  OPTO(3,TOLNL), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlnli",   OPTO(3,TOLNL), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twllei",  OPTO(3,TOLLE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tllei",   OPTO(3,TOLLE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlngi",  OPTO(3,TOLNG), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlngi",   OPTO(3,TOLNG), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twgti",   OPTO(3,TOGT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tgti",    OPTO(3,TOGT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twgei",   OPTO(3,TOGE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tgei",    OPTO(3,TOGE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twnli",   OPTO(3,TONL), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tnli",    OPTO(3,TONL), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlti",   OPTO(3,TOLT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlti",    OPTO(3,TOLT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlei",   OPTO(3,TOLE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlei",    OPTO(3,TOLE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twngi",   OPTO(3,TONG), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tngi",    OPTO(3,TONG), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twnei",   OPTO(3,TONE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tnei",    OPTO(3,TONE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twi",     OP(3),	OP_MASK,	PPC,		{ TO, RA, SI } },
-{ "ti",      OP(3),	OP_MASK,	POWER,		{ TO, RA, SI } },
-
-{ "mulli",   OP(7),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "muli",    OP(7),	OP_MASK,	POWER,		{ RT, RA, SI } },
-
-{ "subfic",  OP(8),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "sfi",     OP(8),	OP_MASK,	POWER,		{ RT, RA, SI } },
-
-{ "dozi",    OP(9),	OP_MASK,	POWER|M601,	{ RT, RA, SI } },
-
-{ "cmplwi",  OPL(10,0),	OPL_MASK,	PPC,		{ OBF, RA, UI } },
-{ "cmpldi",  OPL(10,1), OPL_MASK,	PPC|B64,	{ OBF, RA, UI } },
-{ "cmpli",   OP(10),	OP_MASK,	PPC,		{ BF, L, RA, UI } },
-{ "cmpli",   OP(10),	OP_MASK,	POWER,		{ BF, RA, UI } },
-
-{ "cmpwi",   OPL(11,0),	OPL_MASK,	PPC,		{ OBF, RA, SI } },
-{ "cmpdi",   OPL(11,1),	OPL_MASK,	PPC|B64,	{ OBF, RA, SI } },
-{ "cmpi",    OP(11),	OP_MASK,	PPC,		{ BF, L, RA, SI } },
-{ "cmpi",    OP(11),	OP_MASK,	POWER,		{ BF, RA, SI } },
-
-{ "addic",   OP(12),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "ai",	     OP(12),	OP_MASK,	POWER,		{ RT, RA, SI } },
-{ "subic",   OP(12),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-
-{ "addic.",  OP(13),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "ai.",     OP(13),	OP_MASK,	POWER,		{ RT, RA, SI } },
-{ "subic.",  OP(13),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-
-{ "li",	     OP(14),	DRA_MASK,	PPC,		{ RT, SI } },
-{ "lil",     OP(14),	DRA_MASK,	POWER,		{ RT, SI } },
-{ "addi",    OP(14),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "cal",     OP(14),	OP_MASK,	POWER,		{ RT, D, RA } },
-{ "subi",    OP(14),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-{ "la",	     OP(14),	OP_MASK,	PPC,		{ RT, D, RA } },
-
-{ "lis",     OP(15),	DRA_MASK,	PPC,		{ RT, SISIGNOPT } },
-{ "liu",     OP(15),	DRA_MASK,	POWER,		{ RT, SISIGNOPT } },
-{ "addis",   OP(15),	OP_MASK,	PPC,		{ RT,RA,SISIGNOPT } },
-{ "cau",     OP(15),	OP_MASK,	POWER,		{ RT,RA,SISIGNOPT } },
-{ "subis",   OP(15),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-
-{ "bdnz-",   BBO(16,BODNZ,0,0), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdnz+",   BBO(16,BODNZ,0,0), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdnz",    BBO(16,BODNZ,0,0), BBOYBI_MASK, PPC,	{ BD } },
-{ "bdn",     BBO(16,BODNZ,0,0), BBOYBI_MASK, POWER,	{ BD } },
-{ "bdnzl-",  BBO(16,BODNZ,0,1), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdnzl+",  BBO(16,BODNZ,0,1), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdnzl",   BBO(16,BODNZ,0,1), BBOYBI_MASK, PPC,	{ BD } },
-{ "bdnl",    BBO(16,BODNZ,0,1), BBOYBI_MASK, POWER,	{ BD } },
-{ "bdnza-",  BBO(16,BODNZ,1,0), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdnza+",  BBO(16,BODNZ,1,0), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdnza",   BBO(16,BODNZ,1,0), BBOYBI_MASK, PPC,	{ BDA } },
-{ "bdna",    BBO(16,BODNZ,1,0), BBOYBI_MASK, POWER,	{ BDA } },
-{ "bdnzla-", BBO(16,BODNZ,1,1), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdnzla+", BBO(16,BODNZ,1,1), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdnzla",  BBO(16,BODNZ,1,1), BBOYBI_MASK, PPC,	{ BDA } },
-{ "bdnla",   BBO(16,BODNZ,1,1), BBOYBI_MASK, POWER,	{ BDA } },
-{ "bdz-",    BBO(16,BODZ,0,0), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdz+",    BBO(16,BODZ,0,0), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdz",     BBO(16,BODZ,0,0), BBOYBI_MASK, PPC|POWER,	{ BD } },
-{ "bdzl-",   BBO(16,BODZ,0,1), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdzl+",   BBO(16,BODZ,0,1), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdzl",    BBO(16,BODZ,0,1), BBOYBI_MASK, PPC|POWER,	{ BD } },
-{ "bdza-",   BBO(16,BODZ,1,0), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdza+",   BBO(16,BODZ,1,0), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdza",    BBO(16,BODZ,1,0), BBOYBI_MASK, PPC|POWER,	{ BDA } },
-{ "bdzla-",  BBO(16,BODZ,1,1), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdzla+",  BBO(16,BODZ,1,1), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdzla",   BBO(16,BODZ,1,1), BBOYBI_MASK, PPC|POWER,	{ BDA } },
-{ "blt-",    BBOCB(16,BOT,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "blt+",    BBOCB(16,BOT,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "blt",     BBOCB(16,BOT,CBLT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bltl-",   BBOCB(16,BOT,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bltl+",   BBOCB(16,BOT,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bltl",    BBOCB(16,BOT,CBLT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "blta-",   BBOCB(16,BOT,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "blta+",   BBOCB(16,BOT,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "blta",    BBOCB(16,BOT,CBLT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bltla-",  BBOCB(16,BOT,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bltla+",  BBOCB(16,BOT,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bltla",   BBOCB(16,BOT,CBLT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bgt-",    BBOCB(16,BOT,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bgt+",    BBOCB(16,BOT,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bgt",     BBOCB(16,BOT,CBGT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgtl-",   BBOCB(16,BOT,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bgtl+",   BBOCB(16,BOT,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bgtl",    BBOCB(16,BOT,CBGT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgta-",   BBOCB(16,BOT,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgta+",   BBOCB(16,BOT,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgta",    BBOCB(16,BOT,CBGT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bgtla-",  BBOCB(16,BOT,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgtla+",  BBOCB(16,BOT,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgtla",   BBOCB(16,BOT,CBGT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "beq-",    BBOCB(16,BOT,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "beq+",    BBOCB(16,BOT,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "beq",     BBOCB(16,BOT,CBEQ,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "beql-",   BBOCB(16,BOT,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "beql+",   BBOCB(16,BOT,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "beql",    BBOCB(16,BOT,CBEQ,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "beqa-",   BBOCB(16,BOT,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "beqa+",   BBOCB(16,BOT,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "beqa",    BBOCB(16,BOT,CBEQ,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "beqla-",  BBOCB(16,BOT,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "beqla+",  BBOCB(16,BOT,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "beqla",   BBOCB(16,BOT,CBEQ,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bso-",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bso+",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bso",     BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bsol-",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bsol+",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bsol",    BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bsoa-",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bsoa+",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bsoa",    BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bsola-",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bsola+",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bsola",   BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bun-",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bun+",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bun",     BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "bunl-",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bunl+",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bunl",    BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "buna-",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "buna+",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "buna",    BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bunla-",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bunla+",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bunla",   BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bge-",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bge+",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bge",     BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgel-",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bgel+",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bgel",    BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgea-",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgea+",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgea",    BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bgela-",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgela+",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgela",   BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnl-",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnl+",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnl",     BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnll-",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnll+",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnll",    BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnla-",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnla+",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnla",    BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnlla-",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnlla+",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnlla",   BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "ble-",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "ble+",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "ble",     BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "blel-",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "blel+",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "blel",    BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "blea-",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "blea+",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "blea",    BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "blela-",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "blela+",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "blela",   BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bng-",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bng+",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bng",     BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bngl-",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bngl+",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bngl",    BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnga-",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnga+",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnga",    BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bngla-",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bngla+",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bngla",   BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bne-",    BBOCB(16,BOF,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bne+",    BBOCB(16,BOF,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bne",     BBOCB(16,BOF,CBEQ,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnel-",   BBOCB(16,BOF,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnel+",   BBOCB(16,BOF,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnel",    BBOCB(16,BOF,CBEQ,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnea-",   BBOCB(16,BOF,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnea+",   BBOCB(16,BOF,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnea",    BBOCB(16,BOF,CBEQ,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnela-",  BBOCB(16,BOF,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnela+",  BBOCB(16,BOF,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnela",   BBOCB(16,BOF,CBEQ,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bns-",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bns+",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bns",     BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnsl-",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnsl+",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnsl",    BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnsa-",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnsa+",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnsa",    BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnsla-",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnsla+",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnsla",   BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnu-",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnu+",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnu",     BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "bnul-",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnul+",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnul",    BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "bnua-",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnua+",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnua",    BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bnula-",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnula+",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnula",   BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bdnzt-",  BBO(16,BODNZT,0,0), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnzt+",  BBO(16,BODNZT,0,0), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnzt",   BBO(16,BODNZT,0,0), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnztl-", BBO(16,BODNZT,0,1), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnztl+", BBO(16,BODNZT,0,1), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnztl",  BBO(16,BODNZT,0,1), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnzta-", BBO(16,BODNZT,1,0), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnzta+", BBO(16,BODNZT,1,0), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnzta",  BBO(16,BODNZT,1,0), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bdnztla-",BBO(16,BODNZT,1,1), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnztla+",BBO(16,BODNZT,1,1), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnztla", BBO(16,BODNZT,1,1), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bdnzf-",  BBO(16,BODNZF,0,0), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnzf+",  BBO(16,BODNZF,0,0), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnzf",   BBO(16,BODNZF,0,0), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnzfl-", BBO(16,BODNZF,0,1), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnzfl+", BBO(16,BODNZF,0,1), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnzfl",  BBO(16,BODNZF,0,1), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnzfa-", BBO(16,BODNZF,1,0), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnzfa+", BBO(16,BODNZF,1,0), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnzfa",  BBO(16,BODNZF,1,0), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bdnzfla-",BBO(16,BODNZF,1,1), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnzfla+",BBO(16,BODNZF,1,1), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnzfla", BBO(16,BODNZF,1,1), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bt-",     BBO(16,BOT,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bt+",     BBO(16,BOT,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bt",	     BBO(16,BOT,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbt",     BBO(16,BOT,0,0), BBOY_MASK, POWER,		{ BI, BD } },
-{ "btl-",    BBO(16,BOT,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "btl+",    BBO(16,BOT,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "btl",     BBO(16,BOT,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbtl",    BBO(16,BOT,0,1), BBOY_MASK, POWER,		{ BI, BD } },
-{ "bta-",    BBO(16,BOT,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bta+",    BBO(16,BOT,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bta",     BBO(16,BOT,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbta",    BBO(16,BOT,1,0), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "btla-",   BBO(16,BOT,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "btla+",   BBO(16,BOT,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "btla",    BBO(16,BOT,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbtla",   BBO(16,BOT,1,1), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "bf-",     BBO(16,BOF,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bf+",     BBO(16,BOF,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bf",	     BBO(16,BOF,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbf",     BBO(16,BOF,0,0), BBOY_MASK, POWER,		{ BI, BD } },
-{ "bfl-",    BBO(16,BOF,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bfl+",    BBO(16,BOF,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bfl",     BBO(16,BOF,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbfl",    BBO(16,BOF,0,1), BBOY_MASK, POWER,		{ BI, BD } },
-{ "bfa-",    BBO(16,BOF,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bfa+",    BBO(16,BOF,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bfa",     BBO(16,BOF,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbfa",    BBO(16,BOF,1,0), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "bfla-",   BBO(16,BOF,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bfla+",   BBO(16,BOF,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bfla",    BBO(16,BOF,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbfla",   BBO(16,BOF,1,1), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "bdzt-",   BBO(16,BODZT,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdzt+",   BBO(16,BODZT,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdzt",    BBO(16,BODZT,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdztl-",  BBO(16,BODZT,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdztl+",  BBO(16,BODZT,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdztl",   BBO(16,BODZT,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdzta-",  BBO(16,BODZT,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdzta+",  BBO(16,BODZT,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdzta",   BBO(16,BODZT,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bdztla-", BBO(16,BODZT,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdztla+", BBO(16,BODZT,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdztla",  BBO(16,BODZT,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bdzf-",   BBO(16,BODZF,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdzf+",   BBO(16,BODZF,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdzf",    BBO(16,BODZF,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdzfl-",  BBO(16,BODZF,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdzfl+",  BBO(16,BODZF,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdzfl",   BBO(16,BODZF,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdzfa-",  BBO(16,BODZF,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdzfa+",  BBO(16,BODZF,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdzfa",   BBO(16,BODZF,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bdzfla-", BBO(16,BODZF,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdzfla+", BBO(16,BODZF,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdzfla",  BBO(16,BODZF,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bc-",     B(16,0,0),	B_MASK,		PPC,		{ BOE, BI, BDM } },
-{ "bc+",     B(16,0,0),	B_MASK,		PPC,		{ BOE, BI, BDP } },
-{ "bc",	     B(16,0,0),	B_MASK,		PPC|POWER,	{ BO, BI, BD } },
-{ "bcl-",    B(16,0,1),	B_MASK,		PPC,		{ BOE, BI, BDM } },
-{ "bcl+",    B(16,0,1),	B_MASK,		PPC,		{ BOE, BI, BDP } },
-{ "bcl",     B(16,0,1),	B_MASK,		PPC|POWER,	{ BO, BI, BD } },
-{ "bca-",    B(16,1,0),	B_MASK,		PPC,		{ BOE, BI, BDMA } },
-{ "bca+",    B(16,1,0),	B_MASK,		PPC,		{ BOE, BI, BDPA } },
-{ "bca",     B(16,1,0),	B_MASK,		PPC|POWER,	{ BO, BI, BDA } },
-{ "bcla-",   B(16,1,1),	B_MASK,		PPC,		{ BOE, BI, BDMA } },
-{ "bcla+",   B(16,1,1),	B_MASK,		PPC,		{ BOE, BI, BDPA } },
-{ "bcla",    B(16,1,1),	B_MASK,		PPC|POWER,	{ BO, BI, BDA } },
-
-{ "sc",      SC(17,1,0), 0xffffffff,	PPC,		{ 0 } },
-{ "svc",     SC(17,0,0), SC_MASK,	POWER,		{ LEV, FL1, FL2 } },
-{ "svcl",    SC(17,0,1), SC_MASK,	POWER,		{ LEV, FL1, FL2 } },
-{ "svca",    SC(17,1,0), SC_MASK,	POWER,		{ SV } },
-{ "svcla",   SC(17,1,1), SC_MASK,	POWER,		{ SV } },
-
-{ "b",	     B(18,0,0),	B_MASK,		PPC|POWER,	{ LI } },
-{ "bl",      B(18,0,1),	B_MASK,		PPC|POWER,	{ LI } },
-{ "ba",      B(18,1,0),	B_MASK,		PPC|POWER,	{ LIA } },
-{ "bla",     B(18,1,1),	B_MASK,		PPC|POWER,	{ LIA } },
-
-{ "mcrf",    XL(19,0),	XLBB_MASK|(3<<21)|(3<<16), PPC|POWER, { BF, BFA } },
-
-{ "blr",     XLO(19,BOU,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "br",      XLO(19,BOU,16,0), XLBOBIBB_MASK, POWER,	{ 0 } },
-{ "blrl",    XLO(19,BOU,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "brl",     XLO(19,BOU,16,1), XLBOBIBB_MASK, POWER,	{ 0 } },
-{ "bdnzlr",  XLO(19,BODNZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlr-", XLO(19,BODNZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlr+", XLO(19,BODNZP,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlrl", XLO(19,BODNZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlrl-",XLO(19,BODNZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlrl+",XLO(19,BODNZP,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlr",   XLO(19,BODZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlr-",  XLO(19,BODZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlr+",  XLO(19,BODZP,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlrl",  XLO(19,BODZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlrl-", XLO(19,BODZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlrl+", XLO(19,BODZP,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bltlr",   XLOCB(19,BOT,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlr-",  XLOCB(19,BOT,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlr+",  XLOCB(19,BOTP,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltr",    XLOCB(19,BOT,CBLT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bltlrl",  XLOCB(19,BOT,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlrl-", XLOCB(19,BOT,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlrl+", XLOCB(19,BOTP,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltrl",   XLOCB(19,BOT,CBLT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bgtlr",   XLOCB(19,BOT,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlr-",  XLOCB(19,BOT,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlr+",  XLOCB(19,BOTP,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtr",    XLOCB(19,BOT,CBGT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bgtlrl",  XLOCB(19,BOT,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlrl-", XLOCB(19,BOT,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlrl+", XLOCB(19,BOTP,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtrl",   XLOCB(19,BOT,CBGT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "beqlr",   XLOCB(19,BOT,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlr-",  XLOCB(19,BOT,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlr+",  XLOCB(19,BOTP,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqr",    XLOCB(19,BOT,CBEQ,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "beqlrl",  XLOCB(19,BOT,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlrl-", XLOCB(19,BOT,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlrl+", XLOCB(19,BOTP,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqrl",   XLOCB(19,BOT,CBEQ,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bsolr",   XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolr-",  XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolr+",  XLOCB(19,BOTP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsor",    XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bsolrl",  XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolrl-", XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolrl+", XLOCB(19,BOTP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsorl",   XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bunlr",   XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlr-",  XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlr+",  XLOCB(19,BOTP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlrl",  XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlrl-", XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlrl+", XLOCB(19,BOTP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelr",   XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelr-",  XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelr+",  XLOCB(19,BOFP,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bger",    XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bgelrl",  XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelrl-", XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelrl+", XLOCB(19,BOFP,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgerl",   XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnllr",   XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllr-",  XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllr+",  XLOCB(19,BOFP,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlr",    XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnllrl",  XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllrl-", XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllrl+", XLOCB(19,BOFP,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlrl",   XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "blelr",   XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelr-",  XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelr+",  XLOCB(19,BOFP,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bler",    XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "blelrl",  XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelrl-", XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelrl+", XLOCB(19,BOFP,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blerl",   XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnglr",   XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglr-",  XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglr+",  XLOCB(19,BOFP,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngr",    XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnglrl",  XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglrl-", XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglrl+", XLOCB(19,BOFP,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngrl",   XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnelr",   XLOCB(19,BOF,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelr-",  XLOCB(19,BOF,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelr+",  XLOCB(19,BOFP,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bner",    XLOCB(19,BOF,CBEQ,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnelrl",  XLOCB(19,BOF,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelrl-", XLOCB(19,BOF,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelrl+", XLOCB(19,BOFP,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnerl",   XLOCB(19,BOF,CBEQ,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnslr",   XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslr-",  XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslr+",  XLOCB(19,BOFP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsr",    XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnslrl",  XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslrl-", XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslrl+", XLOCB(19,BOFP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsrl",   XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnulr",   XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulr-",  XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulr+",  XLOCB(19,BOFP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulrl",  XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulrl-", XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulrl+", XLOCB(19,BOFP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "btlr",    XLO(19,BOT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlr-",   XLO(19,BOT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlr+",   XLO(19,BOTP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbtr",    XLO(19,BOT,16,0), XLBOBB_MASK, POWER,	{ BI } },
-{ "btlrl",   XLO(19,BOT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlrl-",  XLO(19,BOT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlrl+",  XLO(19,BOTP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbtrl",   XLO(19,BOT,16,1), XLBOBB_MASK, POWER,	{ BI } },
-{ "bflr",    XLO(19,BOF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflr-",   XLO(19,BOF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflr+",   XLO(19,BOFP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbfr",    XLO(19,BOF,16,0), XLBOBB_MASK, POWER,	{ BI } },
-{ "bflrl",   XLO(19,BOF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflrl-",  XLO(19,BOF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflrl+",  XLO(19,BOFP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbfrl",   XLO(19,BOF,16,1), XLBOBB_MASK, POWER,	{ BI } },
-{ "bdnztlr", XLO(19,BODNZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlr-",XLO(19,BODNZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlr+",XLO(19,BODNZTP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlrl",XLO(19,BODNZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlrl-",XLO(19,BODNZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlrl+",XLO(19,BODNZTP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflr", XLO(19,BODNZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflr-",XLO(19,BODNZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflr+",XLO(19,BODNZFP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflrl",XLO(19,BODNZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflrl-",XLO(19,BODNZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflrl+",XLO(19,BODNZFP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlr",  XLO(19,BODZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlr-", XLO(19,BODZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlr+", XLO(19,BODZTP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlrl", XLO(19,BODZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlrl-",XLO(19,BODZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlrl+",XLO(19,BODZTP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflr",  XLO(19,BODZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflr-", XLO(19,BODZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflr+", XLO(19,BODZFP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflrl", XLO(19,BODZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflrl-",XLO(19,BODZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflrl+",XLO(19,BODZFP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bclr",    XLLK(19,16,0), XLYBB_MASK,	PPC,		{ BO, BI } },
-{ "bclrl",   XLLK(19,16,1), XLYBB_MASK,	PPC,		{ BO, BI } },
-{ "bclr+",   XLYLK(19,16,1,0), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bclrl+",  XLYLK(19,16,1,1), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bclr-",   XLYLK(19,16,0,0), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bclrl-",  XLYLK(19,16,0,1), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bcr",     XLLK(19,16,0), XLBB_MASK,	POWER,		{ BO, BI } },
-{ "bcrl",    XLLK(19,16,1), XLBB_MASK,	POWER,		{ BO, BI } },
-
-{ "crnot",   XL(19,33), XL_MASK,	PPC,		{ BT, BA, BBA } },
-{ "crnor",   XL(19,33),	XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "rfi",     XL(19,50),	0xffffffff,	PPC|POWER,	{ 0 } },
-{ "rfci",    XL(19,51),	0xffffffff,	PPC,		{ 0 } },
-
-{ "rfsvc",   XL(19,82),	0xffffffff,	POWER,		{ 0 } },
-
-{ "crandc",  XL(19,129), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "isync",   XL(19,150), 0xffffffff,	PPC,		{ 0 } },
-{ "ics",     XL(19,150), 0xffffffff,	POWER,		{ 0 } },
-
-{ "crclr",   XL(19,193), XL_MASK,	PPC,		{ BT, BAT, BBA } },
-{ "crxor",   XL(19,193), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crnand",  XL(19,225), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crand",   XL(19,257), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crset",   XL(19,289), XL_MASK,	PPC,		{ BT, BAT, BBA } },
-{ "creqv",   XL(19,289), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crorc",   XL(19,417), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crmove",  XL(19,449), XL_MASK,	PPC,		{ BT, BA, BBA } },
-{ "cror",    XL(19,449), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "bctr",    XLO(19,BOU,528,0), XLBOBIBB_MASK, PPC|POWER, { 0 } },
-{ "bctrl",   XLO(19,BOU,528,1), XLBOBIBB_MASK, PPC|POWER, { 0 } },
-{ "bltctr",  XLOCB(19,BOT,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctr-", XLOCB(19,BOT,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctr+", XLOCB(19,BOTP,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctrl", XLOCB(19,BOT,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctrl-",XLOCB(19,BOT,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctrl+",XLOCB(19,BOTP,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctr",  XLOCB(19,BOT,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctr-", XLOCB(19,BOT,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctr+", XLOCB(19,BOTP,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctrl", XLOCB(19,BOT,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctrl-",XLOCB(19,BOT,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctrl+",XLOCB(19,BOTP,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctr",  XLOCB(19,BOT,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctr-", XLOCB(19,BOT,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctr+", XLOCB(19,BOTP,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctrl", XLOCB(19,BOT,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctrl-",XLOCB(19,BOT,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctrl+",XLOCB(19,BOTP,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctr",  XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctr-", XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctr+", XLOCB(19,BOTP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctrl", XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctrl-",XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctrl+",XLOCB(19,BOTP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctr",  XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctr-", XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctr+", XLOCB(19,BOTP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctrl", XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctrl-",XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctrl+",XLOCB(19,BOTP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectr",  XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectr-", XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectr+", XLOCB(19,BOFP,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectrl", XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectrl-",XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectrl+",XLOCB(19,BOFP,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctr",  XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctr-", XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctr+", XLOCB(19,BOFP,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctrl", XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctrl-",XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctrl+",XLOCB(19,BOFP,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectr",  XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectr-", XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectr+", XLOCB(19,BOFP,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectrl", XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectrl-",XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectrl+",XLOCB(19,BOFP,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctr",  XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctr-", XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctr+", XLOCB(19,BOFP,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctrl", XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctrl-",XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctrl+",XLOCB(19,BOFP,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectr",  XLOCB(19,BOF,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectr-", XLOCB(19,BOF,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectr+", XLOCB(19,BOFP,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectrl", XLOCB(19,BOF,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectrl-",XLOCB(19,BOF,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectrl+",XLOCB(19,BOFP,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctr",  XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctr-", XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctr+", XLOCB(19,BOFP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctrl", XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctrl-",XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctrl+",XLOCB(19,BOFP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctr",  XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctr-", XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctr+", XLOCB(19,BOFP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctrl", XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctrl-",XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctrl+",XLOCB(19,BOFP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "btctr",   XLO(19,BOT,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctr-",  XLO(19,BOT,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctr+",  XLO(19,BOTP,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctrl",  XLO(19,BOT,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctrl-", XLO(19,BOT,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctrl+", XLO(19,BOTP,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctr",   XLO(19,BOF,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctr-",  XLO(19,BOF,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctr+",  XLO(19,BOFP,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctrl",  XLO(19,BOF,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctrl-", XLO(19,BOF,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctrl+", XLO(19,BOFP,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bcctr",   XLLK(19,528,0), XLYBB_MASK, PPC,		{ BO, BI } },
-{ "bcctr-",  XLYLK(19,528,0,0), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcctr+",  XLYLK(19,528,1,0), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcctrl",  XLLK(19,528,1), XLYBB_MASK, PPC,		{ BO, BI } },
-{ "bcctrl-", XLYLK(19,528,0,1), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcctrl+", XLYLK(19,528,1,1), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcc",     XLLK(19,528,0), XLBB_MASK,	POWER,		{ BO, BI } },
-{ "bccl",    XLLK(19,528,1), XLBB_MASK,	POWER,		{ BO, BI } },
-
-{ "rlwimi",  M(20,0),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlimi",   M(20,0),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-
-{ "rlwimi.", M(20,1),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlimi.",  M(20,1),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-
-{ "rotlwi",  MME(21,31,0), MMBME_MASK,	PPC,		{ RA, RS, SH } },
-{ "clrlwi",  MME(21,31,0), MSHME_MASK,	PPC,		{ RA, RS, MB } },
-{ "rlwinm",  M(21,0),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlinm",   M(21,0),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-{ "rotlwi.", MME(21,31,1), MMBME_MASK,	PPC,		{ RA,RS,SH } },
-{ "clrlwi.", MME(21,31,1), MSHME_MASK,	PPC,		{ RA, RS, MB } },
-{ "rlwinm.", M(21,1),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlinm.",  M(21,1),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-
-{ "rlmi",    M(22,0),	M_MASK,		POWER|M601,	{ RA,RS,RB,MBE,ME } },
-{ "rlmi.",   M(22,1),	M_MASK,		POWER|M601,	{ RA,RS,RB,MBE,ME } },
-
-{ "rotlw",   MME(23,31,0), MMBME_MASK,	PPC,		{ RA, RS, RB } },
-{ "rlwnm",   M(23,0),	M_MASK,		PPC,		{ RA,RS,RB,MBE,ME } },
-{ "rlnm",    M(23,0),	M_MASK,		POWER,		{ RA,RS,RB,MBE,ME } },
-{ "rotlw.",  MME(23,31,1), MMBME_MASK,	PPC,		{ RA, RS, RB } },
-{ "rlwnm.",  M(23,1),	M_MASK,		PPC,		{ RA,RS,RB,MBE,ME } },
-{ "rlnm.",   M(23,1),	M_MASK,		POWER,		{ RA,RS,RB,MBE,ME } },
-
-{ "nop",     OP(24),	0xffffffff,	PPC,		{ 0 } },
-{ "ori",     OP(24),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "oril",    OP(24),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "oris",    OP(25),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "oriu",    OP(25),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "xori",    OP(26),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "xoril",   OP(26),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "xoris",   OP(27),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "xoriu",   OP(27),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "andi.",   OP(28),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "andil.",  OP(28),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "andis.",  OP(29),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "andiu.",  OP(29),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "rotldi",  MD(30,0,0), MDMB_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-{ "clrldi",  MD(30,0,0), MDSH_MASK,	PPC|B64,	{ RA, RS, MB6 } },
-{ "rldicl",  MD(30,0,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-{ "rotldi.", MD(30,0,1), MDMB_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-{ "clrldi.", MD(30,0,1), MDSH_MASK,	PPC|B64,	{ RA, RS, MB6 } },
-{ "rldicl.", MD(30,0,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-
-{ "rldicr",  MD(30,1,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, ME6 } },
-{ "rldicr.", MD(30,1,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, ME6 } },
-
-{ "rldic",   MD(30,2,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-{ "rldic.",  MD(30,2,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-
-{ "rldimi",  MD(30,3,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-{ "rldimi.", MD(30,3,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-
-{ "rotld",   MDS(30,8,0), MDSMB_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "rldcl",   MDS(30,8,0), MDS_MASK,	PPC|B64,	{ RA, RS, RB, MB6 } },
-{ "rotld.",  MDS(30,8,1), MDSMB_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "rldcl.",  MDS(30,8,1), MDS_MASK,	PPC|B64,	{ RA, RS, RB, MB6 } },
-
-{ "rldcr",   MDS(30,9,0), MDS_MASK,	PPC|B64,	{ RA, RS, RB, ME6 } },
-{ "rldcr.",  MDS(30,9,1), MDS_MASK,	PPC|B64,	{ RA, RS, RB, ME6 } },
-
-{ "cmpw",    XCMPL(31,0,0), XCMPL_MASK, PPC,		{ OBF, RA, RB } },
-{ "cmpd",    XCMPL(31,0,1), XCMPL_MASK, PPC|B64,	{ OBF, RA, RB } },
-{ "cmp",     X(31,0),	XCMP_MASK,	PPC,		{ BF, L, RA, RB } },
-{ "cmp",     X(31,0),	XCMPL_MASK,	POWER,		{ BF, RA, RB } },
-
-{ "twlgt",   XTO(31,4,TOLGT), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlgt",    XTO(31,4,TOLGT), XTO_MASK, POWER,		{ RA, RB } },
-{ "twllt",   XTO(31,4,TOLLT), XTO_MASK, PPC,		{ RA, RB } },
-{ "tllt",    XTO(31,4,TOLLT), XTO_MASK, POWER,		{ RA, RB } },
-{ "tweq",    XTO(31,4,TOEQ), XTO_MASK,	PPC,		{ RA, RB } },
-{ "teq",     XTO(31,4,TOEQ), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twlge",   XTO(31,4,TOLGE), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlge",    XTO(31,4,TOLGE), XTO_MASK, POWER,		{ RA, RB } },
-{ "twlnl",   XTO(31,4,TOLNL), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlnl",    XTO(31,4,TOLNL), XTO_MASK, POWER,		{ RA, RB } },
-{ "twlle",   XTO(31,4,TOLLE), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlle",    XTO(31,4,TOLLE), XTO_MASK, POWER,		{ RA, RB } },
-{ "twlng",   XTO(31,4,TOLNG), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlng",    XTO(31,4,TOLNG), XTO_MASK, POWER,		{ RA, RB } },
-{ "twgt",    XTO(31,4,TOGT), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tgt",     XTO(31,4,TOGT), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twge",    XTO(31,4,TOGE), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tge",     XTO(31,4,TOGE), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twnl",    XTO(31,4,TONL), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tnl",     XTO(31,4,TONL), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twlt",    XTO(31,4,TOLT), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tlt",     XTO(31,4,TOLT), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twle",    XTO(31,4,TOLE), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tle",     XTO(31,4,TOLE), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twng",    XTO(31,4,TONG), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tng",     XTO(31,4,TONG), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twne",    XTO(31,4,TONE), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tne",     XTO(31,4,TONE), XTO_MASK,	POWER,		{ RA, RB } },
-{ "trap",    XTO(31,4,TOU), 0xffffffff,	PPC,		{ 0 } },
-{ "tw",      X(31,4),	X_MASK,		PPC,		{ TO, RA, RB } },
-{ "t",       X(31,4),	X_MASK,		POWER,		{ TO, RA, RB } },
-
-{ "subfc",   XO(31,8,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sf",      XO(31,8,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subc",    XO(31,8,0,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfc.",  XO(31,8,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sf.",     XO(31,8,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subc.",   XO(31,8,0,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfco",  XO(31,8,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfo",     XO(31,8,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subco",   XO(31,8,1,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfco.", XO(31,8,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfo.",    XO(31,8,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subco.",  XO(31,8,1,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-
-{ "mulhdu",  XO(31,9,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulhdu.", XO(31,9,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "addc",    XO(31,10,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "a",       XO(31,10,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addc.",   XO(31,10,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "a.",      XO(31,10,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addco",   XO(31,10,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ao",      XO(31,10,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addco.",  XO(31,10,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ao.",     XO(31,10,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "mulhwu",  XO(31,11,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulhwu.", XO(31,11,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "mfcr",    X(31,19),	XRARB_MASK,	POWER|PPC,	{ RT } },
-
-{ "lwarx",   X(31,20),	X_MASK,		PPC,		{ RT, RA, RB } },
-
-{ "ldx",     X(31,21),	X_MASK,		PPC|B64,	{ RT, RA, RB } },
-
-{ "lwzx",    X(31,23),	X_MASK,		PPC,		{ RT, RA, RB } },
-{ "lx",      X(31,23),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "slw",     XRC(31,24,0), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sl",      XRC(31,24,0), X_MASK,	POWER,		{ RA, RS, RB } },
-{ "slw.",    XRC(31,24,1), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sl.",     XRC(31,24,1), X_MASK,	POWER,		{ RA, RS, RB } },
-
-{ "cntlzw",  XRC(31,26,0), XRB_MASK,	PPC,		{ RA, RS } },
-{ "cntlz",   XRC(31,26,0), XRB_MASK,	POWER,		{ RA, RS } },
-{ "cntlzw.", XRC(31,26,1), XRB_MASK,	PPC,		{ RA, RS } },
-{ "cntlz.",  XRC(31,26,1), XRB_MASK, 	POWER,		{ RA, RS } },
-
-{ "sld",     XRC(31,27,0), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "sld.",    XRC(31,27,1), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-
-{ "and",     XRC(31,28,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "and.",    XRC(31,28,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "maskg",   XRC(31,29,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "maskg.",  XRC(31,29,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "cmplw",   XCMPL(31,32,0), XCMPL_MASK, PPC,		{ OBF, RA, RB } },
-{ "cmpld",   XCMPL(31,32,1), XCMPL_MASK, PPC|B64,	{ OBF, RA, RB } },
-{ "cmpl",    X(31,32),	XCMP_MASK,	PPC,		{ BF, L, RA, RB } },
-{ "cmpl",    X(31,32),	XCMPL_MASK,	POWER,		{ BF, RA, RB } },
-
-{ "subf",    XO(31,40,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sub",     XO(31,40,0,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subf.",   XO(31,40,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sub.",    XO(31,40,0,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfo",   XO(31,40,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "subo",    XO(31,40,1,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfo.",  XO(31,40,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "subo.",   XO(31,40,1,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-
-{ "ldux",    X(31,53),	X_MASK,		PPC|B64,	{ RT, RAL, RB } },
-
-{ "dcbst",   X(31,54),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lwzux",   X(31,55),	X_MASK,		PPC,		{ RT, RAL, RB } },
-{ "lux",     X(31,55),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "cntlzd",  XRC(31,58,0), XRB_MASK,	PPC|B64,	{ RA, RS } },
-{ "cntlzd.", XRC(31,58,1), XRB_MASK,	PPC|B64,	{ RA, RS } },
-
-{ "andc",    XRC(31,60,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "andc.",   XRC(31,60,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "tdlgt",   XTO(31,68,TOLGT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdllt",   XTO(31,68,TOLLT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdeq",    XTO(31,68,TOEQ), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlge",   XTO(31,68,TOLGE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlnl",   XTO(31,68,TOLNL), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlle",   XTO(31,68,TOLLE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlng",   XTO(31,68,TOLNG), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdgt",    XTO(31,68,TOGT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdge",    XTO(31,68,TOGE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdnl",    XTO(31,68,TONL), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlt",    XTO(31,68,TOLT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdle",    XTO(31,68,TOLE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdng",    XTO(31,68,TONG), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdne",    XTO(31,68,TONE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "td",	     X(31,68),	X_MASK,		PPC|B64,	{ TO, RA, RB } },
-
-{ "mulhd",   XO(31,73,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulhd.",  XO(31,73,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "mulhw",   XO(31,75,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulhw.",  XO(31,75,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "mfmsr",   X(31,83),	XRARB_MASK,	PPC|POWER,	{ RT } },
-
-{ "ldarx",   X(31,84),	X_MASK,		PPC|B64,	{ RT, RA, RB } },
-
-{ "dcbf",    X(31,86),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lbzx",    X(31,87),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "neg",     XO(31,104,0,0), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-{ "neg.",    XO(31,104,0,1), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-{ "nego",    XO(31,104,1,0), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-{ "nego.",   XO(31,104,1,1), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-
-{ "mul",     XO(31,107,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "mul.",    XO(31,107,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "mulo",    XO(31,107,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "mulo.",   XO(31,107,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "clf",     X(31,118), XRB_MASK,	POWER,		{ RT, RA } },
-
-{ "lbzux",   X(31,119),	X_MASK,		PPC|POWER,	{ RT, RAL, RB } },
-
-{ "not",     XRC(31,124,0), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "nor",     XRC(31,124,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "not.",    XRC(31,124,1), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "nor.",    XRC(31,124,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "subfe",   XO(31,136,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfe",     XO(31,136,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subfe.",  XO(31,136,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfe.",    XO(31,136,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subfeo",  XO(31,136,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfeo",    XO(31,136,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subfeo.", XO(31,136,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfeo.",   XO(31,136,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "adde",    XO(31,138,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ae",      XO(31,138,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "adde.",   XO(31,138,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ae.",     XO(31,138,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addeo",   XO(31,138,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "aeo",     XO(31,138,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addeo.",  XO(31,138,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "aeo.",    XO(31,138,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "mtcr",    XFXM(31,144,0xff), XFXFXM_MASK|FXM_MASK, PPC|POWER, { RS }},
-{ "mtcrf",   X(31,144),	XFXFXM_MASK,	PPC|POWER,	{ FXM, RS } },
-
-{ "mtmsr",   X(31,146),	XRARB_MASK,	PPC|POWER,	{ RS } },
-
-{ "stdx",    X(31,149), X_MASK,		PPC|B64,	{ RS, RA, RB } },
-
-{ "stwcx.",  XRC(31,150,1), X_MASK,	PPC,		{ RS, RA, RB } },
-
-{ "stwx",    X(31,151), X_MASK,		PPC,		{ RS, RA, RB } },
-{ "stx",     X(31,151), X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "slq",     XRC(31,152,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "slq.",    XRC(31,152,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sle",     XRC(31,153,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sle.",    XRC(31,153,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "stdux",   X(31,181),	X_MASK,		PPC|B64,	{ RS, RAS, RB } },
-
-{ "stwux",   X(31,183),	X_MASK,		PPC,		{ RS, RAS, RB } },
-{ "stux",    X(31,183),	X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "sliq",    XRC(31,184,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "sliq.",   XRC(31,184,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "subfze",  XO(31,200,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfze",    XO(31,200,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfze.", XO(31,200,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfze.",   XO(31,200,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfzeo", XO(31,200,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfzeo",   XO(31,200,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfzeo.",XO(31,200,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfzeo.",  XO(31,200,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "addze",   XO(31,202,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "aze",     XO(31,202,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addze.",  XO(31,202,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "aze.",    XO(31,202,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "addzeo",  XO(31,202,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "azeo",    XO(31,202,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addzeo.", XO(31,202,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "azeo.",   XO(31,202,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "mtsr",    X(31,210),	XRB_MASK|(1<<20), PPC|POWER|B32, { SR, RS } },
-
-{ "stdcx.",  XRC(31,214,1), X_MASK,	PPC|B64,	{ RS, RA, RB } },
-
-{ "stbx",    X(31,215),	X_MASK,		PPC|POWER,	{ RS, RA, RB } },
-
-{ "sllq",    XRC(31,216,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sllq.",   XRC(31,216,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sleq",    XRC(31,217,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sleq.",   XRC(31,217,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "subfme",  XO(31,232,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfme",    XO(31,232,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfme.", XO(31,232,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfme.",   XO(31,232,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfmeo", XO(31,232,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfmeo",   XO(31,232,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfmeo.",XO(31,232,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfmeo.",  XO(31,232,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "mulld",   XO(31,233,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulld.",  XO(31,233,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulldo",  XO(31,233,1,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulldo.", XO(31,233,1,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "addme",   XO(31,234,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "ame",     XO(31,234,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addme.",  XO(31,234,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "ame.",    XO(31,234,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "addmeo",  XO(31,234,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "ameo",    XO(31,234,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addmeo.", XO(31,234,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "ameo.",   XO(31,234,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "mullw",   XO(31,235,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "muls",    XO(31,235,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "mullw.",  XO(31,235,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "muls.",   XO(31,235,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "mullwo",  XO(31,235,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulso",   XO(31,235,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "mullwo.", XO(31,235,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulso.",  XO(31,235,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "mtsrin",  X(31,242),	XRA_MASK,	PPC|B32,	{ RS, RB } },
-{ "mtsri",   X(31,242),	XRA_MASK,	POWER|B32,	{ RS, RB } },
-
-{ "dcbtst",  X(31,246),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "stbux",   X(31,247),	X_MASK,		PPC|POWER,	{ RS, RAS, RB } },
-
-{ "slliq",   XRC(31,248,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "slliq.",  XRC(31,248,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "doz",     XO(31,264,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "doz.",    XO(31,264,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "dozo",    XO(31,264,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "dozo.",   XO(31,264,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "add",     XO(31,266,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "cax",     XO(31,266,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "add.",    XO(31,266,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "cax.",    XO(31,266,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addo",    XO(31,266,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "caxo",    XO(31,266,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addo.",   XO(31,266,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "caxo.",   XO(31,266,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "lscbx",   XRC(31,277,0), X_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "lscbx.",  XRC(31,277,1), X_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "dcbt",    X(31,278),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lhzx",    X(31,279),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "icbt",    X(31,262),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "eqv",     XRC(31,284,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "eqv.",    XRC(31,284,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "tlbie",   X(31,306),	XRTRA_MASK,	PPC,		{ RB } },
-{ "tlbi",    X(31,306),	XRTRA_MASK,	POWER,		{ RB } },
-
-{ "eciwx",   X(31,310), X_MASK,		PPC,		{ RT, RA, RB } },
-
-{ "lhzux",   X(31,311),	X_MASK,		PPC|POWER,	{ RT, RAL, RB } },
-
-{ "xor",     XRC(31,316,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "xor.",    XRC(31,316,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "mfdcr",   X(31,323),	X_MASK,		PPC,		{ RT, SPR } },
-
-{ "div",     XO(31,331,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "div.",    XO(31,331,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divo",    XO(31,331,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divo.",   XO(31,331,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "mfmq",    XSPR(31,339,0), XSPR_MASK,	POWER|M601,	{ RT } },
-{ "mfxer",   XSPR(31,339,1), XSPR_MASK,	PPC|POWER,	{ RT } },
-{ "mfrtcu",  XSPR(31,339,4), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfrtcl",  XSPR(31,339,5), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfdec",   XSPR(31,339,6), XSPR_MASK, POWER|M601,	{ RT } },
-{ "mflr",    XSPR(31,339,8), XSPR_MASK,	PPC|POWER,	{ RT } },
-{ "mfctr",   XSPR(31,339,9), XSPR_MASK,	PPC|POWER,	{ RT } },
-{ "mftid",   XSPR(31,339,17), XSPR_MASK, POWER,		{ RT } },
-{ "mfdsisr", XSPR(31,339,18), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfdar",   XSPR(31,339,19), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfdec",   XSPR(31,339,22), XSPR_MASK, PPC,		{ RT } },
-{ "mfsdr0",  XSPR(31,339,24), XSPR_MASK, POWER,		{ RT } },
-{ "mfsdr1",  XSPR(31,339,25), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfsrr0",  XSPR(31,339,26), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfsrr1",  XSPR(31,339,27), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfsprg",  XSPR(31,339,272), XSPRG_MASK, PPC,		{ RT, SPRG } },
-{ "mfasr",   XSPR(31,339,280), XSPR_MASK, PPC|B64,	{ RT } },
-{ "mfear",   XSPR(31,339,282), XSPR_MASK, PPC,		{ RT } },
-{ "mfpvr",   XSPR(31,339,287), XSPR_MASK, PPC,		{ RT } },
-{ "mfibatu", XSPR(31,339,528), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfibatl", XSPR(31,339,529), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfdbatu", XSPR(31,339,536), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfdbatl", XSPR(31,339,537), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfspr",   X(31,339),	X_MASK,		PPC|POWER,	{ RT, SPR } },
-
-{ "lwax",    X(31,341),	X_MASK,		PPC|B64,	{ RT, RA, RB } },
-
-{ "lhax",    X(31,343),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "dccci",   X(31,454),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "abs",     XO(31,360,0,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "abs.",    XO(31,360,0,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "abso",    XO(31,360,1,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "abso.",   XO(31,360,1,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-
-{ "divs",    XO(31,363,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divs.",   XO(31,363,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divso",   XO(31,363,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divso.",  XO(31,363,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "tlbia",   X(31,370),	0xffffffff,	PPC,		{ 0 } },
-
-{ "mftbu",   XSPR(31,371,269), XSPR_MASK, PPC,		{ RT } },
-{ "mftb",    X(31,371),	X_MASK,		PPC,		{ RT, TBR } },
-
-{ "lwaux",   X(31,373),	X_MASK,		PPC|B64,	{ RT, RAL, RB } },
-
-{ "lhaux",   X(31,375),	X_MASK,		PPC|POWER,	{ RT, RAL, RB } },
-
-{ "sthx",    X(31,407),	X_MASK,		PPC|POWER,	{ RS, RA, RB } },
-
-{ "lfqx",    X(31,791),	X_MASK,		POWER2,		{ FRT, RA, RB } },
-
-{ "lfqux",   X(31,823),	X_MASK,		POWER2,		{ FRT, RA, RB } },
-
-{ "stfqx",   X(31,919),	X_MASK,		POWER2,		{ FRS, RA, RB } },
-
-{ "stfqux",  X(31,951),	X_MASK,		POWER2,		{ FRS, RA, RB } },
-
-{ "orc",     XRC(31,412,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "orc.",    XRC(31,412,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "sradi",   XS(31,413,0), XS_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-{ "sradi.",  XS(31,413,1), XS_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-
-{ "slbie",   X(31,434),	XRTRA_MASK,	PPC|B64,	{ RB } },
-
-{ "ecowx",   X(31,438),	X_MASK,		PPC,		{ RT, RA, RB } },
-
-{ "sthux",   X(31,439),	X_MASK,		PPC|POWER,	{ RS, RAS, RB } },
-
-{ "mr",	     XRC(31,444,0), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "or",      XRC(31,444,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "mr.",     XRC(31,444,1), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "or.",     XRC(31,444,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "mtdcr",   X(31,451),	X_MASK,		PPC,		{ SPR, RS } },
-
-{ "divdu",   XO(31,457,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divdu.",  XO(31,457,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divduo",  XO(31,457,1,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divduo.", XO(31,457,1,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "divwu",   XO(31,459,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwu.",  XO(31,459,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwuo",  XO(31,459,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwuo.", XO(31,459,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "mtmq",    XSPR(31,467,0), XSPR_MASK,	POWER|M601,	{ RS } },
-{ "mtxer",   XSPR(31,467,1), XSPR_MASK,	PPC|POWER,	{ RS } },
-{ "mtlr",    XSPR(31,467,8), XSPR_MASK,	PPC|POWER,	{ RS } },
-{ "mtctr",   XSPR(31,467,9), XSPR_MASK,	PPC|POWER,	{ RS } },
-{ "mttid",   XSPR(31,467,17), XSPR_MASK, POWER,		{ RS } },
-{ "mtdsisr", XSPR(31,467,18), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtdar",   XSPR(31,467,19), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtrtcu",  XSPR(31,467,20), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtrtcl",  XSPR(31,467,21), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtdec",   XSPR(31,467,22), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsdr0",  XSPR(31,467,24), XSPR_MASK, POWER,		{ RS } },
-{ "mtsdr1",  XSPR(31,467,25), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsrr0",  XSPR(31,467,26), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsrr1",  XSPR(31,467,27), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsprg",  XSPR(31,467,272), XSPRG_MASK, PPC,		{ SPRG, RS } },
-{ "mtasr",   XSPR(31,467,280), XSPR_MASK, PPC|B64,	{ RS } },
-{ "mtear",   XSPR(31,467,282), XSPR_MASK, PPC,		{ RS } },
-{ "mttbl",   XSPR(31,467,284), XSPR_MASK, PPC,		{ RS } },
-{ "mttbu",   XSPR(31,467,285), XSPR_MASK, PPC,		{ RS } },
-{ "mtibatu", XSPR(31,467,528), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtibatl", XSPR(31,467,529), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtdbatu", XSPR(31,467,536), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtdbatl", XSPR(31,467,537), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtspr",   X(31,467),	X_MASK,		PPC|POWER,	{ SPR, RS } },
-
-{ "dcbi",    X(31,470),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "nand",    XRC(31,476,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "nand.",   XRC(31,476,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "nabs",    XO(31,488,0,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "nabs.",   XO(31,488,0,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "nabso",   XO(31,488,1,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "nabso.",  XO(31,488,1,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-
-{ "divd",    XO(31,489,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divd.",   XO(31,489,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divdo",   XO(31,489,1,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divdo.",  XO(31,489,1,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "divw",    XO(31,491,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divw.",   XO(31,491,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwo",   XO(31,491,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwo.",  XO(31,491,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "slbia",   X(31,498),	0xffffffff,	PPC|B64,	{ 0 } },
-
-{ "cli",     X(31,502), XRB_MASK,	POWER,		{ RT, RA } },
-
-{ "mcrxr",   X(31,512),	XRARB_MASK|(3<<21), PPC|POWER,	{ BF } },
-
-{ "clcs",    X(31,531), XRB_MASK,	POWER|M601,	{ RT, RA } },
-
-{ "lswx",    X(31,533),	X_MASK,		PPC,		{ RT, RA, RB } },
-{ "lsx",     X(31,533),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "lwbrx",   X(31,534),	X_MASK,		PPC,		{ RT, RA, RB } },
-{ "lbrx",    X(31,534),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "lfsx",    X(31,535),	X_MASK,		PPC|POWER,	{ FRT, RA, RB } },
-
-{ "srw",     XRC(31,536,0), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sr",      XRC(31,536,0), X_MASK,	POWER,		{ RA, RS, RB } },
-{ "srw.",    XRC(31,536,1), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sr.",     XRC(31,536,1), X_MASK,	POWER,		{ RA, RS, RB } },
-
-{ "rrib",    XRC(31,537,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "rrib.",   XRC(31,537,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "srd",     XRC(31,539,0), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "srd.",    XRC(31,539,1), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-
-{ "maskir",  XRC(31,541,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "maskir.", XRC(31,541,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "tlbsync", X(31,566),	0xffffffff,	PPC,		{ 0 } },
-
-{ "lfsux",   X(31,567),	X_MASK,		PPC|POWER,	{ FRT, RAS, RB } },
-
-{ "mfsr",    X(31,595),	XRB_MASK|(1<<20), PPC|POWER|B32, { RT, SR } },
-
-{ "lswi",    X(31,597),	X_MASK,		PPC,		{ RT, RA, NB } },
-{ "lsi",     X(31,597),	X_MASK,		POWER,		{ RT, RA, NB } },
-
-{ "sync",    X(31,598), 0xffffffff,	PPC,		{ 0 } },
-{ "dcs",     X(31,598), 0xffffffff,	POWER,		{ 0 } },
-
-{ "lfdx",    X(31,599), X_MASK,		PPC|POWER,	{ FRT, RA, RB } },
-
-{ "mfsri",   X(31,627), X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "dclst",   X(31,630), XRB_MASK,	POWER,		{ RS, RA } },
-
-{ "lfdux",   X(31,631), X_MASK,		PPC|POWER,	{ FRT, RAS, RB } },
-
-{ "mfsrin",  X(31,659), XRA_MASK,	PPC|B32,	{ RT, RB } },
-
-{ "stswx",   X(31,661), X_MASK,		PPC,		{ RS, RA, RB } },
-{ "stsx",    X(31,661), X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "stwbrx",  X(31,662), X_MASK,		PPC,		{ RS, RA, RB } },
-{ "stbrx",   X(31,662), X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "stfsx",   X(31,663), X_MASK,		PPC|POWER,	{ FRS, RA, RB } },
-
-{ "srq",     XRC(31,664,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "srq.",    XRC(31,664,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sre",     XRC(31,665,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sre.",    XRC(31,665,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "stfsux",  X(31,695),	X_MASK,		PPC|POWER,	{ FRS, RAS, RB } },
-
-{ "sriq",    XRC(31,696,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "sriq.",   XRC(31,696,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "stswi",   X(31,725),	X_MASK,		PPC,		{ RS, RA, NB } },
-{ "stsi",    X(31,725),	X_MASK,		POWER,		{ RS, RA, NB } },
-
-{ "stfdx",   X(31,727),	X_MASK,		PPC|POWER,	{ FRS, RA, RB } },
-
-{ "srlq",    XRC(31,728,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "srlq.",   XRC(31,728,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sreq",    XRC(31,729,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sreq.",   XRC(31,729,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "stfdux",  X(31,759),	X_MASK,		PPC|POWER,	{ FRS, RAS, RB } },
-
-{ "srliq",   XRC(31,760,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "srliq.",  XRC(31,760,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "lhbrx",   X(31,790),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "sraw",    XRC(31,792,0), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sra",     XRC(31,792,0), X_MASK,	POWER,		{ RA, RS, RB } },
-{ "sraw.",   XRC(31,792,1), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sra.",    XRC(31,792,1), X_MASK,	POWER,		{ RA, RS, RB } },
-
-{ "srad",    XRC(31,794,0), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "srad.",   XRC(31,794,1), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-
-{ "rac",     X(31,818),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "srawi",   XRC(31,824,0), X_MASK,	PPC,		{ RA, RS, SH } },
-{ "srai",    XRC(31,824,0), X_MASK,	POWER,		{ RA, RS, SH } },
-{ "srawi.",  XRC(31,824,1), X_MASK,	PPC,		{ RA, RS, SH } },
-{ "srai.",   XRC(31,824,1), X_MASK,	POWER,		{ RA, RS, SH } },
-
-{ "eieio",   X(31,854),	0xffffffff,	PPC,		{ 0 } },
-
-{ "sthbrx",  X(31,918),	X_MASK,		PPC|POWER,	{ RS, RA, RB } },
-
-{ "sraq",    XRC(31,920,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sraq.",   XRC(31,920,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "srea",    XRC(31,921,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "srea.",   XRC(31,921,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "extsh",   XRC(31,922,0), XRB_MASK,	PPC,		{ RA, RS } },
-{ "exts",    XRC(31,922,0), XRB_MASK,	POWER,		{ RA, RS } },
-{ "extsh.",  XRC(31,922,1), XRB_MASK,	PPC,		{ RA, RS } },
-{ "exts.",   XRC(31,922,1), XRB_MASK,	POWER,		{ RA, RS } },
-
-{ "sraiq",   XRC(31,952,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "sraiq.",  XRC(31,952,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "extsb",   XRC(31,954,0), XRB_MASK,	PPC,		{ RA, RS} },
-{ "extsb.",  XRC(31,954,1), XRB_MASK,	PPC,		{ RA, RS} },
-
-{ "iccci",   X(31,966),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "icbi",    X(31,982),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "stfiwx",  X(31,983),	X_MASK,		PPC,		{ FRS, RA, RB } },
-
-{ "extsw",   XRC(31,986,0), XRB_MASK,	PPC,		{ RA, RS } },
-{ "extsw.",  XRC(31,986,1), XRB_MASK,	PPC,		{ RA, RS } },
-
-{ "dcbz",    X(31,1014), XRT_MASK,	PPC,		{ RA, RB } },
-{ "dclz",    X(31,1014), XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lwz",     OP(32),	OP_MASK,	PPC,		{ RT, D, RA } },
-{ "l",	     OP(32),	OP_MASK,	POWER,		{ RT, D, RA } },
-
-{ "lwzu",    OP(33),	OP_MASK,	PPC,		{ RT, D, RAL } },
-{ "lu",      OP(33),	OP_MASK,	POWER,		{ RT, D, RA } },
-
-{ "lbz",     OP(34),	OP_MASK,	PPC|POWER,	{ RT, D, RA } },
-
-{ "lbzu",    OP(35),	OP_MASK,	PPC|POWER,	{ RT, D, RAL } },
-
-{ "stw",     OP(36),	OP_MASK,	PPC,		{ RS, D, RA } },
-{ "st",      OP(36),	OP_MASK,	POWER,		{ RS, D, RA } },
-
-{ "stwu",    OP(37),	OP_MASK,	PPC,		{ RS, D, RAS } },
-{ "stu",     OP(37),	OP_MASK,	POWER,		{ RS, D, RA } },
-
-{ "stb",     OP(38),	OP_MASK,	PPC|POWER,	{ RS, D, RA } },
-
-{ "stbu",    OP(39),	OP_MASK,	PPC|POWER,	{ RS, D, RAS } },
-
-{ "lhz",     OP(40),	OP_MASK,	PPC|POWER,	{ RT, D, RA } },
-
-{ "lhzu",    OP(41),	OP_MASK,	PPC|POWER,	{ RT, D, RAL } },
-
-{ "lha",     OP(42),	OP_MASK,	PPC|POWER,	{ RT, D, RA } },
-
-{ "lhau",    OP(43),	OP_MASK,	PPC|POWER,	{ RT, D, RAL } },
-
-{ "sth",     OP(44),	OP_MASK,	PPC|POWER,	{ RS, D, RA } },
-
-{ "sthu",    OP(45),	OP_MASK,	PPC|POWER,	{ RS, D, RAS } },
-
-{ "lmw",     OP(46),	OP_MASK,	PPC,		{ RT, D, RAM } },
-{ "lm",      OP(46),	OP_MASK,	POWER,		{ RT, D, RA } },
-
-{ "stmw",    OP(47),	OP_MASK,	PPC,		{ RS, D, RA } },
-{ "stm",     OP(47),	OP_MASK,	POWER,		{ RS, D, RA } },
-
-{ "lfs",     OP(48),	OP_MASK,	PPC|POWER,	{ FRT, D, RA } },
-
-{ "lfsu",    OP(49),	OP_MASK,	PPC|POWER,	{ FRT, D, RAS } },
-
-{ "lfd",     OP(50),	OP_MASK,	PPC|POWER,	{ FRT, D, RA } },
-
-{ "lfdu",    OP(51),	OP_MASK,	PPC|POWER,	{ FRT, D, RAS } },
-
-{ "stfs",    OP(52),	OP_MASK,	PPC|POWER,	{ FRS, D, RA } },
-
-{ "stfsu",   OP(53),	OP_MASK,	PPC|POWER,	{ FRS, D, RAS } },
-
-{ "stfd",    OP(54),	OP_MASK,	PPC|POWER,	{ FRS, D, RA } },
-
-{ "stfdu",   OP(55),	OP_MASK,	PPC|POWER,	{ FRS, D, RAS } },
-
-{ "lfq",     OP(56),	OP_MASK,	POWER2,		{ FRT, D, RA } },
-
-{ "lfqu",    OP(57),	OP_MASK,	POWER2,		{ FRT, D, RA } },
-
-{ "ld",      DSO(58,0),	DS_MASK,	PPC|B64,	{ RT, DS, RA } },
-
-{ "ldu",     DSO(58,1), DS_MASK,	PPC|B64,	{ RT, DS, RAL } },
-
-{ "lwa",     DSO(58,2), DS_MASK,	PPC|B64,	{ RT, DS, RA } },
-
-{ "fdivs",   A(59,18,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fdivs.",  A(59,18,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-
-{ "fsubs",   A(59,20,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fsubs.",  A(59,20,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-
-{ "fadds",   A(59,21,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fadds.",  A(59,21,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-
-{ "fsqrts",  A(59,22,0), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-{ "fsqrts.", A(59,22,1), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-
-{ "fres",    A(59,24,0), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-{ "fres.",   A(59,24,1), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-
-{ "fmuls",   A(59,25,0), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-{ "fmuls.",  A(59,25,1), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-
-{ "fmsubs",  A(59,28,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fmsubs.", A(59,28,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fmadds",  A(59,29,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fmadds.", A(59,29,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmsubs", A(59,30,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnmsubs.",A(59,30,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmadds", A(59,31,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnmadds.",A(59,31,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "stfq",    OP(60),	OP_MASK,	POWER2,		{ FRS, D, RA } },
-
-{ "stfqu",   OP(61),	OP_MASK,	POWER2,		{ FRS, D, RA } },
-
-{ "std",     DSO(62,0),	DS_MASK,	PPC|B64,	{ RS, DS, RA } },
-
-{ "stdu",    DSO(62,1),	DS_MASK,	PPC|B64,	{ RS, DS, RAS } },
-
-{ "fcmpu",   X(63,0),	X_MASK|(3<<21),	PPC|POWER,	{ BF, FRA, FRB } },
-
-{ "frsp",    XRC(63,12,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "frsp.",   XRC(63,12,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "fctiw",   XRC(63,14,0), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcir",    XRC(63,14,0), XRA_MASK,	POWER2,		{ FRT, FRB } },
-{ "fctiw.",  XRC(63,14,1), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcir.",   XRC(63,14,1), XRA_MASK,	POWER2,		{ FRT, FRB } },
-
-{ "fctiwz",  XRC(63,15,0), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcirz",   XRC(63,15,0), XRA_MASK,	POWER2,		{ FRT, FRB } },
-{ "fctiwz.", XRC(63,15,1), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcirz.",  XRC(63,15,1), XRA_MASK,	POWER2,		{ FRT, FRB } },
-
-{ "fdiv",    A(63,18,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fd",      A(63,18,0), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-{ "fdiv.",   A(63,18,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fd.",     A(63,18,1), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-
-{ "fsub",    A(63,20,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fs",      A(63,20,0), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-{ "fsub.",   A(63,20,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fs.",     A(63,20,1), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-
-{ "fadd",    A(63,21,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fa",      A(63,21,0), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-{ "fadd.",   A(63,21,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fa.",     A(63,21,1), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-
-{ "fsqrt",   A(63,22,0), AFRAFRC_MASK,	PPC|POWER2,	{ FRT, FRB } },
-{ "fsqrt.",  A(63,22,1), AFRAFRC_MASK,	PPC|POWER2,	{ FRT, FRB } },
-
-{ "fsel",    A(63,23,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fsel.",   A(63,23,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fmul",    A(63,25,0), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-{ "fm",      A(63,25,0), AFRB_MASK,	POWER,		{ FRT, FRA, FRC } },
-{ "fmul.",   A(63,25,1), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-{ "fm.",     A(63,25,1), AFRB_MASK,	POWER,		{ FRT, FRA, FRC } },
-
-{ "frsqrte", A(63,26,0), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-{ "frsqrte.",A(63,26,1), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-
-{ "fmsub",   A(63,28,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fms",     A(63,28,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fmsub.",  A(63,28,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fms.",    A(63,28,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fmadd",   A(63,29,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fma",     A(63,29,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fmadd.",  A(63,29,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fma.",    A(63,29,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmsub",  A(63,30,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnms",    A(63,30,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fnmsub.", A(63,30,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnms.",   A(63,30,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmadd",  A(63,31,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnma",    A(63,31,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fnmadd.", A(63,31,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnma.",   A(63,31,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fcmpo",   X(63,30),	X_MASK|(3<<21),	PPC|POWER,	{ BF, FRA, FRB } },
-
-{ "mtfsb1",  XRC(63,38,0), XRARB_MASK,	PPC|POWER,	{ BT } },
-{ "mtfsb1.", XRC(63,38,1), XRARB_MASK,	PPC|POWER,	{ BT } },
-
-{ "fneg",    XRC(63,40,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fneg.",   XRC(63,40,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "mcrfs",   X(63,64),	XRB_MASK|(3<<21)|(3<<16), PPC|POWER, { BF, BFA } },
-
-{ "mtfsb0",  XRC(63,70,0), XRARB_MASK,	PPC|POWER,	{ BT } },
-{ "mtfsb0.", XRC(63,70,1), XRARB_MASK,	PPC|POWER,	{ BT } },
-
-{ "fmr",     XRC(63,72,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fmr.",    XRC(63,72,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "mtfsfi",  XRC(63,134,0), XRA_MASK|(3<<21)|(1<<11), PPC|POWER, { BF, U } },
-{ "mtfsfi.", XRC(63,134,1), XRA_MASK|(3<<21)|(1<<11), PPC|POWER, { BF, U } },
-
-{ "fnabs",   XRC(63,136,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fnabs.",  XRC(63,136,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "fabs",    XRC(63,264,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fabs.",   XRC(63,264,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "mffs",    XRC(63,583,0), XRARB_MASK,	PPC|POWER,	{ FRT } },
-{ "mffs.",   XRC(63,583,1), XRARB_MASK,	PPC|POWER,	{ FRT } },
-
-{ "mtfsf",   XFL(63,711,0), XFL_MASK,	PPC|POWER,	{ FLM, FRB } },
-{ "mtfsf.",  XFL(63,711,1), XFL_MASK,	PPC|POWER,	{ FLM, FRB } },
-
-{ "fctid",   XRC(63,814,0), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-{ "fctid.",  XRC(63,814,1), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-
-{ "fctidz",  XRC(63,815,0), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-{ "fctidz.", XRC(63,815,1), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-
-{ "fcfid",   XRC(63,846,0), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-{ "fcfid.",  XRC(63,846,1), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-
-};
-
-const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
-
-/* The macro table.  This is only used by the assembler.  */
-
-const struct powerpc_macro powerpc_macros[] = {
-{ "extldi",  4,   PPC|B64,	"rldicr %0,%1,%3,(%2)-1" },
-{ "extldi.", 4,   PPC|B64,	"rldicr. %0,%1,%3,(%2)-1" },
-{ "extrdi",  4,   PPC|B64,	"rldicl %0,%1,(%2)+(%3),64-(%2)" },
-{ "extrdi.", 4,   PPC|B64,	"rldicl. %0,%1,(%2)+(%3),64-(%2)" },
-{ "insrdi",  4,   PPC|B64,	"rldimi %0,%1,64-((%2)+(%3)),%3" },
-{ "insrdi.", 4,   PPC|B64,	"rldimi. %0,%1,64-((%2)+(%3)),%3" },
-{ "rotrdi",  3,   PPC|B64,	"rldicl %0,%1,64-(%2),0" },
-{ "rotrdi.", 3,   PPC|B64,	"rldicl. %0,%1,64-(%2),0" },
-{ "sldi",    3,   PPC|B64,	"rldicr %0,%1,%2,63-(%2)" },
-{ "sldi.",   3,   PPC|B64,	"rldicr. %0,%1,%2,63-(%2)" },
-{ "srdi",    3,   PPC|B64,	"rldicl %0,%1,64-(%2),%2" },
-{ "srdi.",   3,   PPC|B64,	"rldicl. %0,%1,64-(%2),%2" },
-{ "clrrdi",  3,   PPC|B64,	"rldicr %0,%1,0,63-(%2)" },
-{ "clrrdi.", 3,   PPC|B64,	"rldicr. %0,%1,0,63-(%2)" },
-{ "clrlsldi",4,   PPC|B64,	"rldic %0,%1,%3,(%2)-(%3)" },
-{ "clrlsldi.",4,  PPC|B64,	"rldic. %0,%1,%3,(%2)-(%3)" },
-
-{ "extlwi",  4,   PPC,		"rlwinm %0,%1,%3,0,(%2)-1" },
-{ "extlwi.", 4,   PPC,		"rlwinm. %0,%1,%3,0,(%2)-1" },
-{ "extrwi",  4,   PPC,		"rlwinm %0,%1,(%2)+(%3),32-(%2),31" },
-{ "extrwi.", 4,   PPC,		"rlwinm. %0,%1,(%2)+(%3),32-(%2),31" },
-{ "inslwi",  4,   PPC,		"rlwimi %0,%1,32-(%3),%3,(%2)+(%3)-1" },
-{ "inslwi.", 4,   PPC,		"rlwimi. %0,%1,32-(%3),%3,(%2)+(%3)-1" },
-{ "insrwi",  4,   PPC,		"rlwimi %0,%1,32-((%2)+(%3)),%3,(%2)+(%3)-1" },
-{ "insrwi.", 4,   PPC,		"rlwimi. %0,%1,32-((%2)+(%3)),%3,(%2)+(%3)-1"},
-{ "rotrwi",  3,   PPC,		"rlwinm %0,%1,32-(%2),0,31" },
-{ "rotrwi.", 3,   PPC,		"rlwinm. %0,%1,32-(%2),0,31" },
-{ "slwi",    3,   PPC,		"rlwinm %0,%1,%2,0,31-(%2)" },
-{ "sli",     3,   POWER,	"rlinm %0,%1,%2,0,31-(%2)" },
-{ "slwi.",   3,   PPC,		"rlwinm. %0,%1,%2,0,31-(%2)" },
-{ "sli.",    3,   POWER,	"rlinm. %0,%1,%2,0,31-(%2)" },
-{ "srwi",    3,   PPC,		"rlwinm %0,%1,32-(%2),%2,31" },
-{ "sri",     3,   POWER,	"rlinm %0,%1,32-(%2),%2,31" },
-{ "srwi.",   3,   PPC,		"rlwinm. %0,%1,32-(%2),%2,31" },
-{ "sri.",    3,   POWER,	"rlinm. %0,%1,32-(%2),%2,31" },
-{ "clrrwi",  3,   PPC,		"rlwinm %0,%1,0,0,31-(%2)" },
-{ "clrrwi.", 3,   PPC,		"rlwinm. %0,%1,0,0,31-(%2)" },
-{ "clrlslwi",4,   PPC,		"rlwinm %0,%1,%3,(%2)-(%3),31-(%3)" },
-{ "clrlslwi.",4,  PPC,		"rlwinm. %0,%1,%3,(%2)-(%3),31-(%3)" },
-
-};
-
-const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);
diff --git a/arch/ppc/xmon/ppc.h b/arch/ppc/xmon/ppc.h
deleted file mode 100644
index 2345ecba1fe9..000000000000
--- a/arch/ppc/xmon/ppc.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/* ppc.h -- Header file for PowerPC opcode table
-   Copyright 1994 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-1, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef PPC_H
-#define PPC_H
-
-/* The opcode table is an array of struct powerpc_opcode.  */
-
-struct powerpc_opcode
-{
-  /* The opcode name.  */
-  const char *name;
-
-  /* The opcode itself.  Those bits which will be filled in with
-     operands are zeroes.  */
-  unsigned long opcode;
-
-  /* The opcode mask.  This is used by the disassembler.  This is a
-     mask containing ones indicating those bits which must match the
-     opcode field, and zeroes indicating those bits which need not
-     match (and are presumably filled in by operands).  */
-  unsigned long mask;
-
-  /* One bit flags for the opcode.  These are used to indicate which
-     specific processors support the instructions.  The defined values
-     are listed below.  */
-  unsigned long flags;
-
-  /* An array of operand codes.  Each code is an index into the
-     operand table.  They appear in the order which the operands must
-     appear in assembly code, and are terminated by a zero.  */
-  unsigned char operands[8];
-};
-
-/* The table itself is sorted by major opcode number, and is otherwise
-   in the order in which the disassembler should consider
-   instructions.  */
-extern const struct powerpc_opcode powerpc_opcodes[];
-extern const int powerpc_num_opcodes;
-
-/* Values defined for the flags field of a struct powerpc_opcode.  */
-
-/* Opcode is defined for the PowerPC architecture.  */
-#define PPC_OPCODE_PPC (01)
-
-/* Opcode is defined for the POWER (RS/6000) architecture.  */
-#define PPC_OPCODE_POWER (02)
-
-/* Opcode is defined for the POWER2 (Rios 2) architecture.  */
-#define PPC_OPCODE_POWER2 (04)
-
-/* Opcode is only defined on 32 bit architectures.  */
-#define PPC_OPCODE_32 (010)
-
-/* Opcode is only defined on 64 bit architectures.  */
-#define PPC_OPCODE_64 (020)
-
-/* Opcode is supported by the Motorola PowerPC 601 processor.  The 601
-   is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
-   but it also supports many additional POWER instructions.  */
-#define PPC_OPCODE_601 (040)
-
-/* A macro to extract the major opcode from an instruction.  */
-#define PPC_OP(i) (((i) >> 26) & 0x3f)
-
-/* The operands table is an array of struct powerpc_operand.  */
-
-struct powerpc_operand
-{
-  /* The number of bits in the operand.  */
-  int bits;
-
-  /* How far the operand is left shifted in the instruction.  */
-  int shift;
-
-  /* Insertion function.  This is used by the assembler.  To insert an
-     operand value into an instruction, check this field.
-
-     If it is NULL, execute
-         i |= (op & ((1 << o->bits) - 1)) << o->shift;
-     (i is the instruction which we are filling in, o is a pointer to
-     this structure, and op is the opcode value; this assumes twos
-     complement arithmetic).
-
-     If this field is not NULL, then simply call it with the
-     instruction and the operand value.  It will return the new value
-     of the instruction.  If the ERRMSG argument is not NULL, then if
-     the operand value is illegal, *ERRMSG will be set to a warning
-     string (the operand will be inserted in any case).  If the
-     operand value is legal, *ERRMSG will be unchanged (most operands
-     can accept any value).  */
-  unsigned long (*insert) PARAMS ((unsigned long instruction, long op,
-				   const char **errmsg));
-
-  /* Extraction function.  This is used by the disassembler.  To
-     extract this operand type from an instruction, check this field.
-
-     If it is NULL, compute
-         op = ((i) >> o->shift) & ((1 << o->bits) - 1);
-	 if ((o->flags & PPC_OPERAND_SIGNED) != 0
-	     && (op & (1 << (o->bits - 1))) != 0)
-	   op -= 1 << o->bits;
-     (i is the instruction, o is a pointer to this structure, and op
-     is the result; this assumes twos complement arithmetic).
-
-     If this field is not NULL, then simply call it with the
-     instruction value.  It will return the value of the operand.  If
-     the INVALID argument is not NULL, *INVALID will be set to
-     non-zero if this operand type can not actually be extracted from
-     this operand (i.e., the instruction does not match).  If the
-     operand is valid, *INVALID will not be changed.  */
-  long (*extract) PARAMS ((unsigned long instruction, int *invalid));
-
-  /* One bit syntax flags.  */
-  unsigned long flags;
-};
-
-/* Elements in the table are retrieved by indexing with values from
-   the operands field of the powerpc_opcodes table.  */
-
-extern const struct powerpc_operand powerpc_operands[];
-
-/* Values defined for the flags field of a struct powerpc_operand.  */
-
-/* This operand takes signed values.  */
-#define PPC_OPERAND_SIGNED (01)
-
-/* This operand takes signed values, but also accepts a full positive
-   range of values when running in 32 bit mode.  That is, if bits is
-   16, it takes any value from -0x8000 to 0xffff.  In 64 bit mode,
-   this flag is ignored.  */
-#define PPC_OPERAND_SIGNOPT (02)
-
-/* This operand does not actually exist in the assembler input.  This
-   is used to support extended mnemonics such as mr, for which two
-   operands fields are identical.  The assembler should call the
-   insert function with any op value.  The disassembler should call
-   the extract function, ignore the return value, and check the value
-   placed in the valid argument.  */
-#define PPC_OPERAND_FAKE (04)
-
-/* The next operand should be wrapped in parentheses rather than
-   separated from this one by a comma.  This is used for the load and
-   store instructions which want their operands to look like
-       reg,displacement(reg)
-   */
-#define PPC_OPERAND_PARENS (010)
-
-/* This operand may use the symbolic names for the CR fields, which
-   are
-       lt  0	gt  1	eq  2	so  3	un  3
-       cr0 0	cr1 1	cr2 2	cr3 3
-       cr4 4	cr5 5	cr6 6	cr7 7
-   These may be combined arithmetically, as in cr2*4+gt.  These are
-   only supported on the PowerPC, not the POWER.  */
-#define PPC_OPERAND_CR (020)
-
-/* This operand names a register.  The disassembler uses this to print
-   register names with a leading 'r'.  */
-#define PPC_OPERAND_GPR (040)
-
-/* This operand names a floating point register.  The disassembler
-   prints these with a leading 'f'.  */
-#define PPC_OPERAND_FPR (0100)
-
-/* This operand is a relative branch displacement.  The disassembler
-   prints these symbolically if possible.  */
-#define PPC_OPERAND_RELATIVE (0200)
-
-/* This operand is an absolute branch address.  The disassembler
-   prints these symbolically if possible.  */
-#define PPC_OPERAND_ABSOLUTE (0400)
-
-/* This operand is optional, and is zero if omitted.  This is used for
-   the optional BF and L fields in the comparison instructions.  The
-   assembler must count the number of operands remaining on the line,
-   and the number of operands remaining for the opcode, and decide
-   whether this operand is present or not.  The disassembler should
-   print this operand out only if it is not zero.  */
-#define PPC_OPERAND_OPTIONAL (01000)
-
-/* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
-   is omitted, then for the next operand use this operand value plus
-   1, ignoring the next operand field for the opcode.  This wretched
-   hack is needed because the Power rotate instructions can take
-   either 4 or 5 operands.  The disassembler should print this operand
-   out regardless of the PPC_OPERAND_OPTIONAL field.  */
-#define PPC_OPERAND_NEXT (02000)
-
-/* This operand should be regarded as a negative number for the
-   purposes of overflow checking (i.e., the normal most negative
-   number is disallowed and one more than the normal most positive
-   number is allowed).  This flag will only be set for a signed
-   operand.  */
-#define PPC_OPERAND_NEGATIVE (04000)
-
-/* The POWER and PowerPC assemblers use a few macros.  We keep them
-   with the operands table for simplicity.  The macro table is an
-   array of struct powerpc_macro.  */
-
-struct powerpc_macro
-{
-  /* The macro name.  */
-  const char *name;
-
-  /* The number of operands the macro takes.  */
-  unsigned int operands;
-
-  /* One bit flags for the opcode.  These are used to indicate which
-     specific processors support the instructions.  The values are the
-     same as those for the struct powerpc_opcode flags field.  */
-  unsigned long flags;
-
-  /* A format string to turn the macro into a normal instruction.
-     Each %N in the string is replaced with operand number N (zero
-     based).  */
-  const char *format;
-};
-
-extern const struct powerpc_macro powerpc_macros[];
-extern const int powerpc_num_macros;
-
-#endif /* PPC_H */
diff --git a/arch/ppc/xmon/privinst.h b/arch/ppc/xmon/privinst.h
deleted file mode 100644
index c492a35687bd..000000000000
--- a/arch/ppc/xmon/privinst.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-
-#define GETREG(reg)		\
-    static inline int get_ ## reg (void)	\
-	{ int ret; asm volatile ("mf" #reg " %0" : "=r" (ret) :); return ret; }
-
-#define SETREG(reg)		\
-    static inline void set_ ## reg (int val)	\
-	{ asm volatile ("mt" #reg " %0" : : "r" (val)); }
-
-GETREG(msr)
-SETREG(msr)
-GETREG(cr)
-
-#define GSETSPR(n, name)	\
-    static inline int get_ ## name (void) \
-	{ int ret; asm volatile ("mfspr %0," #n : "=r" (ret) : ); return ret; } \
-    static inline void set_ ## name (int val) \
-	{ asm volatile ("mtspr " #n ",%0" : : "r" (val)); }
-
-GSETSPR(0, mq)
-GSETSPR(1, xer)
-GSETSPR(4, rtcu)
-GSETSPR(5, rtcl)
-GSETSPR(8, lr)
-GSETSPR(9, ctr)
-GSETSPR(18, dsisr)
-GSETSPR(19, dar)
-GSETSPR(22, dec)
-GSETSPR(25, sdr1)
-GSETSPR(26, srr0)
-GSETSPR(27, srr1)
-GSETSPR(272, sprg0)
-GSETSPR(273, sprg1)
-GSETSPR(274, sprg2)
-GSETSPR(275, sprg3)
-GSETSPR(282, ear)
-GSETSPR(287, pvr)
-#ifndef CONFIG_8xx
-GSETSPR(528, bat0u)
-GSETSPR(529, bat0l)
-GSETSPR(530, bat1u)
-GSETSPR(531, bat1l)
-GSETSPR(532, bat2u)
-GSETSPR(533, bat2l)
-GSETSPR(534, bat3u)
-GSETSPR(535, bat3l)
-GSETSPR(1008, hid0)
-GSETSPR(1009, hid1)
-GSETSPR(1010, iabr)
-GSETSPR(1013, dabr)
-GSETSPR(1023, pir)
-#else
-GSETSPR(144, cmpa)
-GSETSPR(145, cmpb)
-GSETSPR(146, cmpc)
-GSETSPR(147, cmpd)
-GSETSPR(158, ictrl)
-#endif
-
-static inline int get_sr(int n)
-{
-    int ret;
-
-    asm (" mfsrin %0,%1" : "=r" (ret) : "r" (n << 28));
-    return ret;
-}
-
-static inline void set_sr(int n, int val)
-{
-    asm ("mtsrin %0,%1" : : "r" (val), "r" (n << 28));
-}
-
-static inline void store_inst(void *p)
-{
-    asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p));
-}
-
-static inline void cflush(void *p)
-{
-    asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p));
-}
-
-static inline void cinval(void *p)
-{
-    asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p));
-}
-
diff --git a/arch/ppc/xmon/setjmp.c b/arch/ppc/xmon/setjmp.c
deleted file mode 100644
index 28352bac2ae6..000000000000
--- a/arch/ppc/xmon/setjmp.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- *
- * NB this file must be compiled with -O2.
- */
-
-int
-xmon_setjmp(long *buf)
-{
-    asm ("mflr 0; stw 0,0(%0);"
-	 "stw 1,4(%0); stw 2,8(%0);"
-	 "mfcr 0; stw 0,12(%0);"
-	 "stmw 13,16(%0)"
-	 : : "r" (buf));
-    /* XXX should save fp regs as well */
-    return 0;
-}
-
-void
-xmon_longjmp(long *buf, int val)
-{
-    if (val == 0)
-	val = 1;
-    asm ("lmw 13,16(%0);"
-	 "lwz 0,12(%0); mtcrf 0x38,0;"
-	 "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
-	 "mtlr 0; mr 3,%1"
-	 : : "r" (buf), "r" (val));
-}
diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c
deleted file mode 100644
index 9056fe58aaa1..000000000000
--- a/arch/ppc/xmon/start.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sysrq.h>
-#include <linux/bitops.h>
-#include <asm/xmon.h>
-#include <asm/errno.h>
-#include <asm/processor.h>
-#include <asm/delay.h>
-#include <asm/btext.h>
-#include <asm/ibm4xx.h>
-
-static volatile unsigned char *sccc, *sccd;
-unsigned int TXRDY, RXRDY, DLAB;
-static int xmon_expect(const char *str, unsigned int timeout);
-
-static int via_modem;
-
-#define TB_SPEED	25000000
-
-static inline unsigned int readtb(void)
-{
-	unsigned int ret;
-
-	asm volatile("mftb %0" : "=r" (ret) :);
-	return ret;
-}
-
-void buf_access(void)
-{
-	if (DLAB)
-		sccd[3] &= ~DLAB;	/* reset DLAB */
-}
-
-
-#ifdef CONFIG_MAGIC_SYSRQ
-static void sysrq_handle_xmon(int key, struct pt_regs *regs,
-			      struct tty_struct *tty)
-{
-	xmon(regs);
-}
-
-static struct sysrq_key_op sysrq_xmon_op =
-{
-	.handler =	sysrq_handle_xmon,
-	.help_msg =	"Xmon",
-	.action_msg =	"Entering xmon",
-};
-#endif
-
-void
-xmon_map_scc(void)
-{
-#if defined(CONFIG_405GP)
-	sccd = (volatile unsigned char *)0xef600300;
-#elif defined(CONFIG_440EP)
-	sccd = (volatile unsigned char *) ioremap(PPC440EP_UART0_ADDR, 8);
-#elif defined(CONFIG_440SP)
-	sccd = (volatile unsigned char *) ioremap64(PPC440SP_UART0_ADDR, 8);
-#elif defined(CONFIG_440SPE)
-	sccd = (volatile unsigned char *) ioremap64(PPC440SPE_UART0_ADDR, 8);
-#elif defined(CONFIG_44x)
-	/* This is the default for 44x platforms.  Any boards that have a
-	   different UART address need to be put in cases before this or the
-	   port will be mapped incorrectly */
-	sccd = (volatile unsigned char *) ioremap64(PPC440GP_UART0_ADDR, 8);
-#endif /* platform */
-
-#ifndef CONFIG_PPC_PREP
-	sccc = sccd + 5;
-	TXRDY = 0x20;
-	RXRDY = 1;
-	DLAB = 0x80;
-#endif
-
-	register_sysrq_key('x', &sysrq_xmon_op);
-}
-
-static int scc_initialized;
-
-void xmon_init_scc(void);
-
-int
-xmon_write(void *handle, void *ptr, int nb)
-{
-	char *p = ptr;
-	int i, c, ct;
-
-#ifdef CONFIG_SMP
-	static unsigned long xmon_write_lock;
-	int lock_wait = 1000000;
-	int locked;
-
-	while ((locked = test_and_set_bit(0, &xmon_write_lock)) != 0)
-		if (--lock_wait == 0)
-			break;
-#endif
-
-	if (!scc_initialized)
-		xmon_init_scc();
-	ct = 0;
-	for (i = 0; i < nb; ++i) {
-		while ((*sccc & TXRDY) == 0)
-			;
-		c = p[i];
-		if (c == '\n' && !ct) {
-			c = '\r';
-			ct = 1;
-			--i;
-		} else {
-			ct = 0;
-		}
-		buf_access();
-		*sccd = c;
-		eieio();
-	}
-
-#ifdef CONFIG_SMP
-	if (!locked)
-		clear_bit(0, &xmon_write_lock);
-#endif
-	return nb;
-}
-
-int xmon_wants_key;
-
-
-int
-xmon_read(void *handle, void *ptr, int nb)
-{
-    char *p = ptr;
-    int i;
-
-    if (!scc_initialized)
-	xmon_init_scc();
-    for (i = 0; i < nb; ++i) {
-	while ((*sccc & RXRDY) == 0)
-	    ;
-	buf_access();
-	*p++ = *sccd;
-    }
-    return i;
-}
-
-int
-xmon_read_poll(void)
-{
-	if ((*sccc & RXRDY) == 0) {
-		;
-		return -1;
-	}
-	buf_access();
-	return *sccd;
-}
-
-void
-xmon_init_scc(void)
-{
-	scc_initialized = 1;
-	if (via_modem) {
-		for (;;) {
-			xmon_write(NULL, "ATE1V1\r", 7);
-			if (xmon_expect("OK", 5)) {
-				xmon_write(NULL, "ATA\r", 4);
-				if (xmon_expect("CONNECT", 40))
-					break;
-			}
-			xmon_write(NULL, "+++", 3);
-			xmon_expect("OK", 3);
-		}
-	}
-}
-
-
-void *xmon_stdin;
-void *xmon_stdout;
-void *xmon_stderr;
-
-void
-xmon_init(int arg)
-{
-	xmon_map_scc();
-}
-
-int
-xmon_putc(int c, void *f)
-{
-    char ch = c;
-
-    if (c == '\n')
-	xmon_putc('\r', f);
-    return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int
-xmon_putchar(int c)
-{
-    return xmon_putc(c, xmon_stdout);
-}
-
-int
-xmon_fputs(char *str, void *f)
-{
-    int n = strlen(str);
-
-    return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-    char ch;
-
-    for (;;) {
-	switch (xmon_read(xmon_stdin, &ch, 1)) {
-	case 1:
-	    return ch;
-	case -1:
-	    xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-	    return -1;
-	}
-    }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int xmon_expect(const char *str, unsigned int timeout)
-{
-	int c;
-	unsigned int t0;
-
-	timeout *= TB_SPEED;
-	t0 = readtb();
-	do {
-		lineptr = line;
-		for (;;) {
-			c = xmon_read_poll();
-			if (c == -1) {
-				if (readtb() - t0 > timeout)
-					return 0;
-				continue;
-			}
-			if (c == '\n')
-				break;
-			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
-				*lineptr++ = c;
-		}
-		*lineptr = 0;
-	} while (strstr(line, str) == NULL);
-	return 1;
-}
-
-int
-xmon_getchar(void)
-{
-    int c;
-
-    if (lineleft == 0) {
-	lineptr = line;
-	for (;;) {
-	    c = xmon_readchar();
-	    if (c == -1 || c == 4)
-		break;
-	    if (c == '\r' || c == '\n') {
-		*lineptr++ = '\n';
-		xmon_putchar('\n');
-		break;
-	    }
-	    switch (c) {
-	    case 0177:
-	    case '\b':
-		if (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    case 'U' & 0x1F:
-		while (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    default:
-		if (lineptr >= &line[sizeof(line) - 1])
-		    xmon_putchar('\a');
-		else {
-		    xmon_putchar(c);
-		    *lineptr++ = c;
-		}
-	    }
-	}
-	lineleft = lineptr - line;
-	lineptr = line;
-    }
-    if (lineleft == 0)
-	return -1;
-    --lineleft;
-    return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-    char *p;
-    int c;
-
-    for (p = str; p < str + nb - 1; ) {
-	c = xmon_getchar();
-	if (c == -1) {
-	    if (p == str)
-		return NULL;
-	    break;
-	}
-	*p++ = c;
-	if (c == '\n')
-	    break;
-    }
-    *p = 0;
-    return str;
-}
-
-void
-xmon_enter(void)
-{
-}
-
-void
-xmon_leave(void)
-{
-}
diff --git a/arch/ppc/xmon/start_8xx.c b/arch/ppc/xmon/start_8xx.c
deleted file mode 100644
index 30974068c223..000000000000
--- a/arch/ppc/xmon/start_8xx.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- * Copyright (C) 2000 Dan Malek.
- * Quick hack of Paul's code to make XMON work on 8xx processors.  Lots
- * of assumptions, like the SMC1 is used, it has been initialized by the
- * loader at some point, and we can just stuff and suck bytes.
- * We rely upon the 8xx uart driver to support us, as the interface
- * changes between boot up and operational phases of the kernel.
- */
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kernel.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include <asm/cpm1.h>
-
-extern void xmon_printf(const char *fmt, ...);
-extern int xmon_8xx_write(char *str, int nb);
-extern int xmon_8xx_read_poll(void);
-extern int xmon_8xx_read_char(void);
-void prom_drawhex(uint);
-void prom_drawstring(const char *str);
-
-static int use_screen = 1; /* default */
-
-#define TB_SPEED	25000000
-
-static inline unsigned int readtb(void)
-{
-	unsigned int ret;
-
-	asm volatile("mftb %0" : "=r" (ret) :);
-	return ret;
-}
-
-void buf_access(void)
-{
-}
-
-void
-xmon_map_scc(void)
-{
-
-	cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-	use_screen = 0;
-	
-	prom_drawstring("xmon uses serial port\n");
-}
-
-static int scc_initialized = 0;
-
-void xmon_init_scc(void);
-
-int
-xmon_write(void *handle, void *ptr, int nb)
-{
-	char *p = ptr;
-	int i, c, ct;
-
-	if (!scc_initialized)
-		xmon_init_scc();
-
-	return(xmon_8xx_write(ptr, nb));
-}
-
-int xmon_wants_key;
-
-int
-xmon_read(void *handle, void *ptr, int nb)
-{
-	char *p = ptr;
-	int i;
-
-	if (!scc_initialized)
-		xmon_init_scc();
-
-	for (i = 0; i < nb; ++i) {
-		*p++ = xmon_8xx_read_char();
-	}
-	return i;
-}
-
-int
-xmon_read_poll(void)
-{
-	return(xmon_8xx_read_poll());
-}
-
-void
-xmon_init_scc()
-{
-	scc_initialized = 1;
-}
-
-#if 0
-extern int (*prom_entry)(void *);
-
-int
-xmon_exit(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    for (;;) {
-	args.service = "exit";
-	(*prom_entry)(&args);
-    }
-}
-#endif
-
-void *xmon_stdin;
-void *xmon_stdout;
-void *xmon_stderr;
-
-void
-xmon_init(void)
-{
-}
-
-int
-xmon_putc(int c, void *f)
-{
-    char ch = c;
-
-    if (c == '\n')
-	xmon_putc('\r', f);
-    return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int
-xmon_putchar(int c)
-{
-    return xmon_putc(c, xmon_stdout);
-}
-
-int
-xmon_fputs(char *str, void *f)
-{
-    int n = strlen(str);
-
-    return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-    char ch;
-
-    for (;;) {
-	switch (xmon_read(xmon_stdin, &ch, 1)) {
-	case 1:
-	    return ch;
-	case -1:
-	    xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-	    return -1;
-	}
-    }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-#if 0
-int xmon_expect(const char *str, unsigned int timeout)
-{
-	int c;
-	unsigned int t0;
-
-	timeout *= TB_SPEED;
-	t0 = readtb();
-	do {
-		lineptr = line;
-		for (;;) {
-			c = xmon_read_poll();
-			if (c == -1) {
-				if (readtb() - t0 > timeout)
-					return 0;
-				continue;
-			}
-			if (c == '\n')
-				break;
-			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
-				*lineptr++ = c;
-		}
-		*lineptr = 0;
-	} while (strstr(line, str) == NULL);
-	return 1;
-}
-#endif
-
-int
-xmon_getchar(void)
-{
-    int c;
-
-    if (lineleft == 0) {
-	lineptr = line;
-	for (;;) {
-	    c = xmon_readchar();
-	    if (c == -1 || c == 4)
-		break;
-	    if (c == '\r' || c == '\n') {
-		*lineptr++ = '\n';
-		xmon_putchar('\n');
-		break;
-	    }
-	    switch (c) {
-	    case 0177:
-	    case '\b':
-		if (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    case 'U' & 0x1F:
-		while (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    default:
-		if (lineptr >= &line[sizeof(line) - 1])
-		    xmon_putchar('\a');
-		else {
-		    xmon_putchar(c);
-		    *lineptr++ = c;
-		}
-	    }
-	}
-	lineleft = lineptr - line;
-	lineptr = line;
-    }
-    if (lineleft == 0)
-	return -1;
-    --lineleft;
-    return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-    char *p;
-    int c;
-
-    for (p = str; p < str + nb - 1; ) {
-	c = xmon_getchar();
-	if (c == -1) {
-	    if (p == str)
-		return 0;
-	    break;
-	}
-	*p++ = c;
-	if (c == '\n')
-	    break;
-    }
-    *p = 0;
-    return str;
-}
-
-void
-prom_drawhex(uint val)
-{
-	unsigned char buf[10];
-
-	int i;
-	for (i = 7;  i >= 0;  i--)
-	{
-		buf[i] = "0123456789abcdef"[val & 0x0f];
-		val >>= 4;
-	}
-	buf[8] = '\0';
-	xmon_fputs(buf, xmon_stdout);
-}
-
-void
-prom_drawstring(const char *str)
-{
-	xmon_fputs(str, xmon_stdout);
-}
diff --git a/arch/ppc/xmon/subr_prf.c b/arch/ppc/xmon/subr_prf.c
deleted file mode 100644
index 126624f3f2ed..000000000000
--- a/arch/ppc/xmon/subr_prf.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Written by Cort Dougan to replace the version originally used
- * by Paul Mackerras, which came from NetBSD and thus had copyright
- * conflicts with Linux.
- *
- * This file makes liberal use of the standard linux utility
- * routines to reduce the size of the binary.  We assume we can
- * trust some parts of Linux inside the debugger.
- *   -- Cort (cort@cs.nmt.edu)
- *
- * Copyright (C) 1999 Cort Dougan.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <stdarg.h>
-#include "nonstdio.h"
-
-extern int xmon_write(void *, void *, int);
-
-void
-xmon_vfprintf(void *f, const char *fmt, va_list ap)
-{
-	static char xmon_buf[2048];
-	int n;
-
-	n = vsprintf(xmon_buf, fmt, ap);
-	xmon_write(f, xmon_buf, n);
-}
-
-void
-xmon_printf(const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(stdout, fmt, ap);
-	va_end(ap);
-}
-
-void
-xmon_fprintf(void *f, const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(f, fmt, ap);
-	va_end(ap);
-}
-
-void
-xmon_puts(char *s)
-{
-	xmon_write(stdout, s, strlen(s));
-}
diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c
deleted file mode 100644
index b1a91744fd2d..000000000000
--- a/arch/ppc/xmon/xmon.c
+++ /dev/null
@@ -1,1780 +0,0 @@
-/*
- * Routines providing a simple monitor for use on the PowerMac.
- *
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/kallsyms.h>
-#include <asm/ptrace.h>
-#include <asm/string.h>
-#include <asm/machdep.h>
-#include <asm/xmon.h>
-#include "nonstdio.h"
-#include "privinst.h"
-
-#define scanhex	xmon_scanhex
-#define skipbl	xmon_skipbl
-
-#ifdef CONFIG_SMP
-static unsigned long cpus_in_xmon = 0;
-static unsigned long got_xmon = 0;
-static volatile int take_xmon = -1;
-#endif /* CONFIG_SMP */
-
-static unsigned adrs;
-static int size = 1;
-static unsigned ndump = 64;
-static unsigned nidump = 16;
-static unsigned ncsum = 4096;
-static int termch;
-
-static u_int bus_error_jmp[100];
-#define setjmp xmon_setjmp
-#define longjmp xmon_longjmp
-
-/* Breakpoint stuff */
-struct bpt {
-	unsigned address;
-	unsigned instr;
-	unsigned count;
-	unsigned char enabled;
-};
-
-#define NBPTS	16
-static struct bpt bpts[NBPTS];
-static struct bpt dabr;
-static struct bpt iabr;
-static unsigned bpinstr = 0x7fe00008;	/* trap */
-
-/* Prototypes */
-extern void (*debugger_fault_handler)(struct pt_regs *);
-static int cmds(struct pt_regs *);
-static int mread(unsigned, void *, int);
-static int mwrite(unsigned, void *, int);
-static void handle_fault(struct pt_regs *);
-static void byterev(unsigned char *, int);
-static void memex(void);
-static int bsesc(void);
-static void dump(void);
-static void prdump(unsigned, int);
-#ifdef __MWERKS__
-static void prndump(unsigned, int);
-static int nvreadb(unsigned);
-#endif
-static int ppc_inst_dump(unsigned, int);
-void print_address(unsigned);
-static int getsp(void);
-static void dump_hash_table(void);
-static void backtrace(struct pt_regs *);
-static void excprint(struct pt_regs *);
-static void prregs(struct pt_regs *);
-static void memops(int);
-static void memlocate(void);
-static void memzcan(void);
-static void memdiffs(unsigned char *, unsigned char *, unsigned, unsigned);
-int skipbl(void);
-int scanhex(unsigned *valp);
-static void scannl(void);
-static int hexdigit(int);
-void getstring(char *, int);
-static void flush_input(void);
-static int inchar(void);
-static void take_input(char *);
-/* static void openforth(void); */
-static unsigned read_spr(int);
-static void write_spr(int, unsigned);
-static void super_regs(void);
-static void symbol_lookup(void);
-static void remove_bpts(void);
-static void insert_bpts(void);
-static struct bpt *at_breakpoint(unsigned pc);
-static void bpt_cmds(void);
-void cacheflush(void);
-#ifdef CONFIG_SMP
-static void cpu_cmd(void);
-#endif /* CONFIG_SMP */
-static void csum(void);
-static void bootcmds(void);
-static void proccall(void);
-static void printtime(void);
-
-extern int print_insn_big_powerpc(FILE *, unsigned long, unsigned);
-extern void printf(const char *fmt, ...);
-extern int putchar(int ch);
-extern int setjmp(u_int *);
-extern void longjmp(u_int *, int);
-
-extern void xmon_enter(void);
-extern void xmon_leave(void);
-
-static unsigned start_tb[NR_CPUS][2];
-static unsigned stop_tb[NR_CPUS][2];
-
-#define GETWORD(v)	(((v)[0] << 24) + ((v)[1] << 16) + ((v)[2] << 8) + (v)[3])
-
-#define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
-			 || ('a' <= (c) && (c) <= 'f') \
-			 || ('A' <= (c) && (c) <= 'F'))
-#define isalnum(c)	(('0' <= (c) && (c) <= '9') \
-			 || ('a' <= (c) && (c) <= 'z') \
-			 || ('A' <= (c) && (c) <= 'Z'))
-#define isspace(c)	(c == ' ' || c == '\t' || c == 10 || c == 13 || c == 0)
-
-static char *help_string = "\
-Commands:\n\
-  d	dump bytes\n\
-  di	dump instructions\n\
-  df	dump float values\n\
-  dd	dump double values\n\
-  e	print exception information\n\
-  h	dump hash table\n\
-  m	examine/change memory\n\
-  mm	move a block of memory\n\
-  ms	set a block of memory\n\
-  md	compare two blocks of memory\n\
-  r	print registers\n\
-  S	print special registers\n\
-  t	print backtrace\n\
-  la	lookup address\n\
-  ls	lookup symbol\n\
-  C	checksum\n\
-  p	call function with arguments\n\
-  T	print time\n\
-  x	exit monitor\n\
-  zr    reboot\n\
-  zh    halt\n\
-";
-
-static int xmon_trace[NR_CPUS];
-#define SSTEP	1		/* stepping because of 's' command */
-#define BRSTEP	2		/* stepping over breakpoint */
-
-#ifdef CONFIG_4xx
-#define MSR_SSTEP_ENABLE 0x200
-#else
-#define MSR_SSTEP_ENABLE 0x400
-#endif
-
-static struct pt_regs *xmon_regs[NR_CPUS];
-
-extern inline void sync(void)
-{
-	asm volatile("sync; isync");
-}
-
-extern inline void __delay(unsigned int loops)
-{
-	if (loops != 0)
-		__asm__ __volatile__("mtctr %0; 1: bdnz 1b" : :
-				     "r" (loops) : "ctr");
-}
-
-/* Print an address in numeric and symbolic form (if possible) */
-static void xmon_print_symbol(unsigned long address, const char *mid,
-			      const char *after)
-{
-	char *modname;
-	const char *name = NULL;
-	unsigned long offset, size;
-	static char tmpstr[128];
-
-	printf("%.8lx", address);
-	if (setjmp(bus_error_jmp) == 0) {
-		debugger_fault_handler = handle_fault;
-		sync();
-		name = kallsyms_lookup(address, &size, &offset, &modname,
-				       tmpstr);
-		sync();
-		/* wait a little while to see if we get a machine check */
-		__delay(200);
-	}
-	debugger_fault_handler = NULL;
-
-	if (name) {
-		printf("%s%s+%#lx/%#lx", mid, name, offset, size);
-		if (modname)
-			printf(" [%s]", modname);
-	}
-	printf("%s", after);
-}
-
-static void get_tb(unsigned *p)
-{
-	unsigned hi, lo, hiagain;
-
-	if ((get_pvr() >> 16) == 1)
-		return;
-
-	do {
-		asm volatile("mftbu %0; mftb %1; mftbu %2"
-			     : "=r" (hi), "=r" (lo), "=r" (hiagain));
-	} while (hi != hiagain);
-	p[0] = hi;
-	p[1] = lo;
-}
-
-static inline void xmon_enable_sstep(struct pt_regs *regs)
-{
-	regs->msr |= MSR_SSTEP_ENABLE;
-#ifdef CONFIG_4xx
-	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
-#endif
-}
-
-int xmon(struct pt_regs *excp)
-{
-	struct pt_regs regs;
-	int msr, cmd;
-
-	get_tb(stop_tb[smp_processor_id()]);
-	if (excp == NULL) {
-		asm volatile ("stw	0,0(%0)\n\
-			lwz	0,0(1)\n\
-			stw	0,4(%0)\n\
-			stmw	2,8(%0)" : : "b" (&regs));
-		regs.nip = regs.link = ((unsigned long *)regs.gpr[1])[1];
-		regs.msr = get_msr();
-		regs.ctr = get_ctr();
-		regs.xer = get_xer();
-		regs.ccr = get_cr();
-		regs.trap = 0;
-		excp = &regs;
-	}
-
-	msr = get_msr();
-	set_msr(msr & ~0x8000);	/* disable interrupts */
-	xmon_regs[smp_processor_id()] = excp;
-	xmon_enter();
-	excprint(excp);
-#ifdef CONFIG_SMP
-	if (test_and_set_bit(smp_processor_id(), &cpus_in_xmon))
-		for (;;)
-			;
-	while (test_and_set_bit(0, &got_xmon)) {
-		if (take_xmon == smp_processor_id()) {
-			take_xmon = -1;
-			break;
-		}
-	}
-	/*
-	 * XXX: breakpoints are removed while any cpu is in xmon
-	 */
-#endif /* CONFIG_SMP */
-	remove_bpts();
-	cmd = cmds(excp);
-	if (cmd == 's') {
-		xmon_trace[smp_processor_id()] = SSTEP;
-		xmon_enable_sstep(excp);
-	} else if (at_breakpoint(excp->nip)) {
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		xmon_enable_sstep(excp);
-	} else {
-		xmon_trace[smp_processor_id()] = 0;
-		insert_bpts();
-	}
-	xmon_leave();
-	xmon_regs[smp_processor_id()] = NULL;
-#ifdef CONFIG_SMP
-	clear_bit(0, &got_xmon);
-	clear_bit(smp_processor_id(), &cpus_in_xmon);
-#endif /* CONFIG_SMP */
-	set_msr(msr);		/* restore interrupt enable */
-	get_tb(start_tb[smp_processor_id()]);
-
-	return cmd != 'X';
-}
-
-irqreturn_t
-xmon_irq(int irq, void *d, struct pt_regs *regs)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	printf("Keyboard interrupt\n");
-	xmon(regs);
-	local_irq_restore(flags);
-	return IRQ_HANDLED;
-}
-
-int
-xmon_bpt(struct pt_regs *regs)
-{
-	struct bpt *bp;
-
-	bp = at_breakpoint(regs->nip);
-	if (!bp)
-		return 0;
-	if (bp->count) {
-		--bp->count;
-		remove_bpts();
-		excprint(regs);
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		xmon_enable_sstep(regs);
-	} else {
-		xmon(regs);
-	}
-	return 1;
-}
-
-int
-xmon_sstep(struct pt_regs *regs)
-{
-	if (!xmon_trace[smp_processor_id()])
-		return 0;
-	if (xmon_trace[smp_processor_id()] == BRSTEP) {
-		xmon_trace[smp_processor_id()] = 0;
-		insert_bpts();
-	} else {
-		xmon(regs);
-	}
-	return 1;
-}
-
-int
-xmon_dabr_match(struct pt_regs *regs)
-{
-	if (dabr.enabled && dabr.count) {
-		--dabr.count;
-		remove_bpts();
-		excprint(regs);
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		regs->msr |= 0x400;
-	} else {
-		dabr.instr = regs->nip;
-		xmon(regs);
-	}
-	return 1;
-}
-
-int
-xmon_iabr_match(struct pt_regs *regs)
-{
-	if (iabr.enabled && iabr.count) {
-		--iabr.count;
-		remove_bpts();
-		excprint(regs);
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		regs->msr |= 0x400;
-	} else {
-		xmon(regs);
-	}
-	return 1;
-}
-
-static struct bpt *
-at_breakpoint(unsigned pc)
-{
-	int i;
-	struct bpt *bp;
-
-	if (dabr.enabled && pc == dabr.instr)
-		return &dabr;
-	if (iabr.enabled && pc == iabr.address)
-		return &iabr;
-	bp = bpts;
-	for (i = 0; i < NBPTS; ++i, ++bp)
-		if (bp->enabled && pc == bp->address)
-			return bp;
-	return NULL;
-}
-
-static void
-insert_bpts(void)
-{
-	int i;
-	struct bpt *bp;
-
-	bp = bpts;
-	for (i = 0; i < NBPTS; ++i, ++bp) {
-		if (!bp->enabled)
-			continue;
-		if (mread(bp->address, &bp->instr, 4) != 4
-		    || mwrite(bp->address, &bpinstr, 4) != 4) {
-			printf("Couldn't insert breakpoint at %x, disabling\n",
-			       bp->address);
-			bp->enabled = 0;
-		}
-		store_inst((void *) bp->address);
-	}
-#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx))
-	if (dabr.enabled)
-		set_dabr(dabr.address);
-	if (iabr.enabled)
-		set_iabr(iabr.address);
-#endif
-}
-
-static void
-remove_bpts(void)
-{
-	int i;
-	struct bpt *bp;
-	unsigned instr;
-
-#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx))
-	set_dabr(0);
-	set_iabr(0);
-#endif
-	bp = bpts;
-	for (i = 0; i < NBPTS; ++i, ++bp) {
-		if (!bp->enabled)
-			continue;
-		if (mread(bp->address, &instr, 4) == 4
-		    && instr == bpinstr
-		    && mwrite(bp->address, &bp->instr, 4) != 4)
-			printf("Couldn't remove breakpoint at %x\n",
-			       bp->address);
-		store_inst((void *) bp->address);
-	}
-}
-
-static char *last_cmd;
-
-/* Command interpreting routine */
-static int
-cmds(struct pt_regs *excp)
-{
-	int cmd;
-
-	last_cmd = NULL;
-	for(;;) {
-#ifdef CONFIG_SMP
-		printf("%d:", smp_processor_id());
-#endif /* CONFIG_SMP */
-		printf("mon> ");
-		fflush(stdout);
-		flush_input();
-		termch = 0;
-		cmd = skipbl();
-		if( cmd == '\n' ) {
-			if (last_cmd == NULL)
-				continue;
-			take_input(last_cmd);
-			last_cmd = NULL;
-			cmd = inchar();
-		}
-		switch (cmd) {
-		case 'm':
-			cmd = inchar();
-			switch (cmd) {
-			case 'm':
-			case 's':
-			case 'd':
-				memops(cmd);
-				break;
-			case 'l':
-				memlocate();
-				break;
-			case 'z':
-				memzcan();
-				break;
-			default:
-				termch = cmd;
-				memex();
-			}
-			break;
-		case 'd':
-			dump();
-			break;
-		case 'l':
-			symbol_lookup();
-			break;
-		case 'r':
-			if (excp != NULL)
-				prregs(excp);	/* print regs */
-			break;
-		case 'e':
-			if (excp == NULL)
-				printf("No exception information\n");
-			else
-				excprint(excp);
-			break;
-		case 'S':
-			super_regs();
-			break;
-		case 't':
-			backtrace(excp);
-			break;
-		case 'f':
-			cacheflush();
-			break;
-		case 'h':
-			dump_hash_table();
-			break;
-		case 's':
-		case 'x':
-		case EOF:
-			return cmd;
-		case '?':
-			printf(help_string);
-			break;
-		default:
-			printf("Unrecognized command: ");
-			if( ' ' < cmd && cmd <= '~' )
-				putchar(cmd);
-			else
-				printf("\\x%x", cmd);
-			printf(" (type ? for help)\n");
-			break;
-		case 'b':
-			bpt_cmds();
-			break;
-		case 'C':
-			csum();
-			break;
-#ifdef CONFIG_SMP
-		case 'c':
-			cpu_cmd();
-			break;
-#endif /* CONFIG_SMP */
-		case 'z':
-			bootcmds();
-			break;
-		case 'p':
-			proccall();
-			break;
-		case 'T':
-			printtime();
-			break;
-		}
-	}
-}
-
-extern unsigned tb_to_us;
-
-#define mulhwu(x,y) \
-({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-
-static void printtime(void)
-{
-	unsigned int delta;
-
-	delta = stop_tb[smp_processor_id()][1]
-		- start_tb[smp_processor_id()][1];
-	delta = mulhwu(tb_to_us, delta);
-	printf("%u.%06u seconds\n", delta / 1000000, delta % 1000000);
-}
-
-static void bootcmds(void)
-{
-	int cmd;
-
-	cmd = inchar();
-	if (cmd == 'r')
-		ppc_md.restart(NULL);
-	else if (cmd == 'h')
-		ppc_md.halt();
-	else if (cmd == 'p')
-		ppc_md.power_off();
-}
-
-#ifdef CONFIG_SMP
-static void cpu_cmd(void)
-{
-	unsigned cpu;
-	int timeout;
-	int cmd;
-
-	cmd = inchar();
-	if (cmd == 'i') {
-		/* interrupt other cpu(s) */
-		cpu = MSG_ALL_BUT_SELF;
-		if (scanhex(&cpu))
-			smp_send_xmon_break(cpu);
-		return;
-	}
-	termch = cmd;
-	if (!scanhex(&cpu)) {
-		/* print cpus waiting or in xmon */
-		printf("cpus stopped:");
-		for (cpu = 0; cpu < NR_CPUS; ++cpu) {
-			if (test_bit(cpu, &cpus_in_xmon)) {
-				printf(" %d", cpu);
-				if (cpu == smp_processor_id())
-					printf("*", cpu);
-			}
-		}
-		printf("\n");
-		return;
-	}
-	/* try to switch to cpu specified */
-	take_xmon = cpu;
-	timeout = 10000000;
-	while (take_xmon >= 0) {
-		if (--timeout == 0) {
-			/* yes there's a race here */
-			take_xmon = -1;
-			printf("cpu %u didn't take control\n", cpu);
-			return;
-		}
-	}
-	/* now have to wait to be given control back */
-	while (test_and_set_bit(0, &got_xmon)) {
-		if (take_xmon == smp_processor_id()) {
-			take_xmon = -1;
-			break;
-		}
-	}
-}
-#endif /* CONFIG_SMP */
-
-
-static unsigned short fcstab[256] = {
-	0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-	0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-	0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-	0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
-	0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
-	0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
-	0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
-	0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
-	0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
-	0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
-	0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
-	0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
-	0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
-	0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
-	0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
-	0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
-	0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
-	0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
-	0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
-	0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
-	0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
-	0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
-	0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
-	0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
-	0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
-	0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
-	0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
-	0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
-	0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
-	0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
-	0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
-	0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-#define FCS(fcs, c)	(((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-static void
-csum(void)
-{
-	unsigned int i;
-	unsigned short fcs;
-	unsigned char v;
-
-	if (!scanhex(&adrs))
-		return;
-	if (!scanhex(&ncsum))
-		return;
-	fcs = 0xffff;
-	for (i = 0; i < ncsum; ++i) {
-		if (mread(adrs+i, &v, 1) == 0) {
-			printf("csum stopped at %x\n", adrs+i);
-			break;
-		}
-		fcs = FCS(fcs, v);
-	}
-	printf("%x\n", fcs);
-}
-
-static void
-bpt_cmds(void)
-{
-	int cmd;
-	unsigned a;
-	int mode, i;
-	struct bpt *bp;
-
-	cmd = inchar();
-	switch (cmd) {
-#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx))
-	case 'd':
-		mode = 7;
-		cmd = inchar();
-		if (cmd == 'r')
-			mode = 5;
-		else if (cmd == 'w')
-			mode = 6;
-		else
-			termch = cmd;
-		cmd = inchar();
-		if (cmd == 'p')
-			mode &= ~4;
-		else
-			termch = cmd;
-		dabr.address = 0;
-		dabr.count = 0;
-		dabr.enabled = scanhex(&dabr.address);
-		scanhex(&dabr.count);
-		if (dabr.enabled)
-			dabr.address = (dabr.address & ~7) | mode;
-		break;
-	case 'i':
-		cmd = inchar();
-		if (cmd == 'p')
-			mode = 2;
-		else
-			mode = 3;
-		iabr.address = 0;
-		iabr.count = 0;
-		iabr.enabled = scanhex(&iabr.address);
-		if (iabr.enabled)
-			iabr.address |= mode;
-		scanhex(&iabr.count);
-		break;
-#endif
-	case 'c':
-		if (!scanhex(&a)) {
-			/* clear all breakpoints */
-			for (i = 0; i < NBPTS; ++i)
-				bpts[i].enabled = 0;
-			iabr.enabled = 0;
-			dabr.enabled = 0;
-			printf("All breakpoints cleared\n");
-		} else {
-			bp = at_breakpoint(a);
-			if (bp == 0) {
-				printf("No breakpoint at %x\n", a);
-			} else {
-				bp->enabled = 0;
-			}
-		}
-		break;
-	default:
-		termch = cmd;
-		if (!scanhex(&a)) {
-			/* print all breakpoints */
-			printf("type  address   count\n");
-			if (dabr.enabled) {
-				printf("data %.8x %8x [", dabr.address & ~7,
-				       dabr.count);
-				if (dabr.address & 1)
-					printf("r");
-				if (dabr.address & 2)
-					printf("w");
-				if (!(dabr.address & 4))
-					printf("p");
-				printf("]\n");
-			}
-			if (iabr.enabled)
-				printf("inst %.8x %8x\n", iabr.address & ~3,
-				       iabr.count);
-			for (bp = bpts; bp < &bpts[NBPTS]; ++bp)
-				if (bp->enabled)
-					printf("trap %.8x %8x\n", bp->address,
-					       bp->count);
-			break;
-		}
-		bp = at_breakpoint(a);
-		if (bp == 0) {
-			for (bp = bpts; bp < &bpts[NBPTS]; ++bp)
-				if (!bp->enabled)
-					break;
-			if (bp >= &bpts[NBPTS]) {
-				printf("Sorry, no free breakpoints\n");
-				break;
-			}
-		}
-		bp->enabled = 1;
-		bp->address = a;
-		bp->count = 0;
-		scanhex(&bp->count);
-		break;
-	}
-}
-
-static void
-backtrace(struct pt_regs *excp)
-{
-	unsigned sp;
-	unsigned stack[2];
-	struct pt_regs regs;
-	extern char ret_from_except, ret_from_except_full, ret_from_syscall;
-
-	printf("backtrace:\n");
-	
-	if (excp != NULL)
-		sp = excp->gpr[1];
-	else
-		sp = getsp();
-	scanhex(&sp);
-	scannl();
-	for (; sp != 0; sp = stack[0]) {
-		if (mread(sp, stack, sizeof(stack)) != sizeof(stack))
-			break;
-		printf("[%.8lx] ", stack[0]);
-		xmon_print_symbol(stack[1], " ", "\n");
-		if (stack[1] == (unsigned) &ret_from_except
-		    || stack[1] == (unsigned) &ret_from_except_full
-		    || stack[1] == (unsigned) &ret_from_syscall) {
-			if (mread(sp+16, &regs, sizeof(regs)) != sizeof(regs))
-				break;
-			printf("exception:%x [%x] %x\n", regs.trap, sp+16,
-			       regs.nip);
-			sp = regs.gpr[1];
-			if (mread(sp, stack, sizeof(stack)) != sizeof(stack))
-				break;
-		}
-	}
-}
-
-int
-getsp(void)
-{
-    int x;
-
-    asm("mr %0,1" : "=r" (x) :);
-    return x;
-}
-
-void
-excprint(struct pt_regs *fp)
-{
-	int trap;
-
-#ifdef CONFIG_SMP
-	printf("cpu %d: ", smp_processor_id());
-#endif /* CONFIG_SMP */
-	printf("vector: %x at pc=", fp->trap);
-	xmon_print_symbol(fp->nip, ": ", ", lr=");
-	xmon_print_symbol(fp->link, ": ", "\n");
-	printf("msr = %x, sp = %x [%x]\n", fp->msr, fp->gpr[1], fp);
-	trap = TRAP(fp);
-	if (trap == 0x300 || trap == 0x600)
-		printf("dar = %x, dsisr = %x\n", fp->dar, fp->dsisr);
-	if (current)
-		printf("current = %x, pid = %d, comm = %s\n",
-		       current, current->pid, current->comm);
-}
-
-void
-prregs(struct pt_regs *fp)
-{
-	int n;
-	unsigned base;
-
-	if (scanhex(&base))
-		fp = (struct pt_regs *) base;
-	for (n = 0; n < 32; ++n) {
-		printf("R%.2d = %.8x%s", n, fp->gpr[n],
-		       (n & 3) == 3? "\n": "   ");
-		if (n == 12 && !FULL_REGS(fp)) {
-			printf("\n");
-			break;
-		}
-	}
-	printf("pc  = %.8x   msr = %.8x   lr  = %.8x   cr  = %.8x\n",
-	       fp->nip, fp->msr, fp->link, fp->ccr);
-	printf("ctr = %.8x   xer = %.8x   trap = %4x\n",
-	       fp->ctr, fp->xer, fp->trap);
-}
-
-void
-cacheflush(void)
-{
-	int cmd;
-	unsigned nflush;
-
-	cmd = inchar();
-	if (cmd != 'i')
-		termch = cmd;
-	scanhex(&adrs);
-	if (termch != '\n')
-		termch = 0;
-	nflush = 1;
-	scanhex(&nflush);
-	nflush = (nflush + 31) / 32;
-	if (cmd != 'i') {
-		for (; nflush > 0; --nflush, adrs += 0x20)
-			cflush((void *) adrs);
-	} else {
-		for (; nflush > 0; --nflush, adrs += 0x20)
-			cinval((void *) adrs);
-	}
-}
-
-unsigned int
-read_spr(int n)
-{
-    unsigned int instrs[2];
-    int (*code)(void);
-
-    instrs[0] = 0x7c6002a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
-    instrs[1] = 0x4e800020;
-    store_inst(instrs);
-    store_inst(instrs+1);
-    code = (int (*)(void)) instrs;
-    return code();
-}
-
-void
-write_spr(int n, unsigned int val)
-{
-    unsigned int instrs[2];
-    int (*code)(unsigned int);
-
-    instrs[0] = 0x7c6003a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
-    instrs[1] = 0x4e800020;
-    store_inst(instrs);
-    store_inst(instrs+1);
-    code = (int (*)(unsigned int)) instrs;
-    code(val);
-}
-
-static unsigned int regno;
-extern char exc_prolog;
-extern char dec_exc;
-
-void
-super_regs(void)
-{
-	int i, cmd;
-	unsigned val;
-
-	cmd = skipbl();
-	if (cmd == '\n') {
-		printf("msr = %x, pvr = %x\n", get_msr(), get_pvr());
-		printf("sprg0-3 = %x %x %x %x\n", get_sprg0(), get_sprg1(),
-		       get_sprg2(), get_sprg3());
-		printf("srr0 = %x, srr1 = %x\n", get_srr0(), get_srr1());
-#ifdef CONFIG_PPC_STD_MMU
-		printf("sr0-15 =");
-		for (i = 0; i < 16; ++i)
-			printf(" %x", get_sr(i));
-		printf("\n");
-#endif
-		asm("mr %0,1" : "=r" (i) :);
-		printf("sp = %x ", i);
-		asm("mr %0,2" : "=r" (i) :);
-		printf("toc = %x\n", i);
-		return;
-	}
-
-	scanhex(&regno);
-	switch (cmd) {
-	case 'w':
-		val = read_spr(regno);
-		scanhex(&val);
-		write_spr(regno, val);
-		/* fall through */
-	case 'r':
-		printf("spr %x = %x\n", regno, read_spr(regno));
-		break;
-	case 's':
-		val = get_sr(regno);
-		scanhex(&val);
-		set_sr(regno, val);
-		break;
-	case 'm':
-		val = get_msr();
-		scanhex(&val);
-		set_msr(val);
-		break;
-	}
-	scannl();
-}
-
-#ifndef CONFIG_PPC_STD_MMU
-static void
-dump_hash_table(void)
-{
-	printf("This CPU doesn't have a hash table.\n");
-}
-#else
-
-static void
-dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
-{
-	extern void *Hash;
-	extern unsigned long Hash_size;
-	unsigned *htab = Hash;
-	unsigned hsize = Hash_size;
-	unsigned v, hmask, va, last_va = 0;
-	int found, last_found, i;
-	unsigned *hg, w1, last_w2 = 0, last_va0 = 0;
-
-	last_found = 0;
-	hmask = hsize / 64 - 1;
-	va = start;
-	start = (start >> 12) & 0xffff;
-	end = (end >> 12) & 0xffff;
-	for (v = start; v < end; ++v) {
-		found = 0;
-		hg = htab + (((v ^ seg) & hmask) * 16);
-		w1 = 0x80000000 | (seg << 7) | (v >> 10);
-		for (i = 0; i < 8; ++i, hg += 2) {
-			if (*hg == w1) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found) {
-			w1 ^= 0x40;
-			hg = htab + ((~(v ^ seg) & hmask) * 16);
-			for (i = 0; i < 8; ++i, hg += 2) {
-				if (*hg == w1) {
-					found = 1;
-					break;
-				}
-			}
-		}
-		if (!(last_found && found && (hg[1] & ~0x180) == last_w2 + 4096)) {
-			if (last_found) {
-				if (last_va != last_va0)
-					printf(" ... %x", last_va);
-				printf("\n");
-			}
-			if (found) {
-				printf("%x to %x", va, hg[1]);
-				last_va0 = va;
-			}
-			last_found = found;
-		}
-		if (found) {
-			last_w2 = hg[1] & ~0x180;
-			last_va = va;
-		}
-		va += 4096;
-	}
-	if (last_found)
-		printf(" ... %x\n", last_va);
-}
-
-static unsigned hash_ctx;
-static unsigned hash_start;
-static unsigned hash_end;
-
-static void
-dump_hash_table(void)
-{
-	int seg;
-	unsigned seg_start, seg_end;
-
-	hash_ctx = 0;
-	hash_start = 0;
-	hash_end = 0xfffff000;
-	scanhex(&hash_ctx);
-	scanhex(&hash_start);
-	scanhex(&hash_end);
-	printf("Mappings for context %x\n", hash_ctx);
-	seg_start = hash_start;
-	for (seg = hash_start >> 28; seg <= hash_end >> 28; ++seg) {
-		seg_end = (seg << 28) | 0x0ffff000;
-		if (seg_end > hash_end)
-			seg_end = hash_end;
-		dump_hash_table_seg((hash_ctx << 4) + (seg * 0x111),
-				    seg_start, seg_end);
-		seg_start = seg_end + 0x1000;
-	}
-}
-#endif /* CONFIG_PPC_STD_MMU */
-
-/*
- * Stuff for reading and writing memory safely
- */
-
-int
-mread(unsigned adrs, void *buf, int size)
-{
-	volatile int n;
-	char *p, *q;
-
-	n = 0;
-	if( setjmp(bus_error_jmp) == 0 ){
-		debugger_fault_handler = handle_fault;
-		sync();
-		p = (char *) adrs;
-		q = (char *) buf;
-		switch (size) {
-		case 2: *(short *)q = *(short *)p;	break;
-		case 4: *(int *)q = *(int *)p;		break;
-		default:
-			for( ; n < size; ++n ) {
-				*q++ = *p++;
-				sync();
-			}
-		}
-		sync();
-		/* wait a little while to see if we get a machine check */
-		__delay(200);
-		n = size;
-	}
-	debugger_fault_handler = NULL;
-	return n;
-}
-
-int
-mwrite(unsigned adrs, void *buf, int size)
-{
-	volatile int n;
-	char *p, *q;
-
-	n = 0;
-	if( setjmp(bus_error_jmp) == 0 ){
-		debugger_fault_handler = handle_fault;
-		sync();
-		p = (char *) adrs;
-		q = (char *) buf;
-		switch (size) {
-		case 2: *(short *)p = *(short *)q;	break;
-		case 4: *(int *)p = *(int *)q;		break;
-		default:
-			for( ; n < size; ++n ) {
-				*p++ = *q++;
-				sync();
-			}
-		}
-		sync();
-		n = size;
-	} else {
-		printf("*** Error writing address %x\n", adrs + n);
-	}
-	debugger_fault_handler = NULL;
-	return n;
-}
-
-static int fault_type;
-static int fault_except;
-static char *fault_chars[] = { "--", "**", "##" };
-
-static void
-handle_fault(struct pt_regs *regs)
-{
-	fault_except = TRAP(regs);
-	fault_type = TRAP(regs) == 0x200? 0: TRAP(regs) == 0x300? 1: 2;
-	longjmp(bus_error_jmp, 1);
-}
-
-#define SWAP(a, b, t)	((t) = (a), (a) = (b), (b) = (t))
-
-void
-byterev(unsigned char *val, int size)
-{
-	int t;
-	
-	switch (size) {
-	case 2:
-		SWAP(val[0], val[1], t);
-		break;
-	case 4:
-		SWAP(val[0], val[3], t);
-		SWAP(val[1], val[2], t);
-		break;
-	}
-}
-
-static int brev;
-static int mnoread;
-
-void
-memex(void)
-{
-    int cmd, inc, i, nslash;
-    unsigned n;
-    unsigned char val[4];
-
-    last_cmd = "m\n";
-    scanhex(&adrs);
-    while ((cmd = skipbl()) != '\n') {
-	switch( cmd ){
-	case 'b':	size = 1;	break;
-	case 'w':	size = 2;	break;
-	case 'l':	size = 4;	break;
-	case 'r': 	brev = !brev;	break;
-	case 'n':	mnoread = 1;	break;
-	case '.':	mnoread = 0;	break;
-	}
-    }
-    if( size <= 0 )
-	size = 1;
-    else if( size > 4 )
-	size = 4;
-    for(;;){
-	if (!mnoread)
-	    n = mread(adrs, val, size);
-	printf("%.8x%c", adrs, brev? 'r': ' ');
-	if (!mnoread) {
-	    if (brev)
-		byterev(val, size);
-	    putchar(' ');
-	    for (i = 0; i < n; ++i)
-		printf("%.2x", val[i]);
-	    for (; i < size; ++i)
-		printf("%s", fault_chars[fault_type]);
-	}
-	putchar(' ');
-	inc = size;
-	nslash = 0;
-	for(;;){
-	    if( scanhex(&n) ){
-		for (i = 0; i < size; ++i)
-		    val[i] = n >> (i * 8);
-		if (!brev)
-		    byterev(val, size);
-		mwrite(adrs, val, size);
-		inc = size;
-	    }
-	    cmd = skipbl();
-	    if (cmd == '\n')
-		break;
-	    inc = 0;
-	    switch (cmd) {
-	    case '\'':
-		for(;;){
-		    n = inchar();
-		    if( n == '\\' )
-			n = bsesc();
-		    else if( n == '\'' )
-			break;
-		    for (i = 0; i < size; ++i)
-			val[i] = n >> (i * 8);
-		    if (!brev)
-			byterev(val, size);
-		    mwrite(adrs, val, size);
-		    adrs += size;
-		}
-		adrs -= size;
-		inc = size;
-		break;
-	    case ',':
-		adrs += size;
-		break;
-	    case '.':
-		mnoread = 0;
-		break;
-	    case ';':
-		break;
-	    case 'x':
-	    case EOF:
-		scannl();
-		return;
-	    case 'b':
-	    case 'v':
-		size = 1;
-		break;
-	    case 'w':
-		size = 2;
-		break;
-	    case 'l':
-		size = 4;
-		break;
-	    case '^':
-		adrs -= size;
-		break;
-		break;
-	    case '/':
-		if (nslash > 0)
-		    adrs -= 1 << nslash;
-		else
-		    nslash = 0;
-		nslash += 4;
-		adrs += 1 << nslash;
-		break;
-	    case '\\':
-		if (nslash < 0)
-		    adrs += 1 << -nslash;
-		else
-		    nslash = 0;
-		nslash -= 4;
-		adrs -= 1 << -nslash;
-		break;
-	    case 'm':
-		scanhex(&adrs);
-		break;
-	    case 'n':
-		mnoread = 1;
-		break;
-	    case 'r':
-		brev = !brev;
-		break;
-	    case '<':
-		n = size;
-		scanhex(&n);
-		adrs -= n;
-		break;
-	    case '>':
-		n = size;
-		scanhex(&n);
-		adrs += n;
-		break;
-	    }
-	}
-	adrs += inc;
-    }
-}
-
-int
-bsesc(void)
-{
-	int c;
-
-	c = inchar();
-	switch( c ){
-	case 'n':	c = '\n';	break;
-	case 'r':	c = '\r';	break;
-	case 'b':	c = '\b';	break;
-	case 't':	c = '\t';	break;
-	}
-	return c;
-}
-
-void
-dump(void)
-{
-	int c;
-
-	c = inchar();
-	if ((isxdigit(c) && c != 'f' && c != 'd') || c == '\n')
-		termch = c;
-	scanhex(&adrs);
-	if( termch != '\n')
-		termch = 0;
-	if( c == 'i' ){
-		scanhex(&nidump);
-		if( nidump == 0 )
-			nidump = 16;
-		adrs += ppc_inst_dump(adrs, nidump);
-		last_cmd = "di\n";
-	} else {
-		scanhex(&ndump);
-		if( ndump == 0 )
-			ndump = 64;
-		prdump(adrs, ndump);
-		adrs += ndump;
-		last_cmd = "d\n";
-	}
-}
-
-void
-prdump(unsigned adrs, int ndump)
-{
-	register int n, m, c, r, nr;
-	unsigned char temp[16];
-
-	for( n = ndump; n > 0; ){
-		printf("%.8x", adrs);
-		putchar(' ');
-		r = n < 16? n: 16;
-		nr = mread(adrs, temp, r);
-		adrs += nr;
-		for( m = 0; m < r; ++m ){
-			putchar((m & 3) == 0 && m > 0? '.': ' ');
-			if( m < nr )
-				printf("%.2x", temp[m]);
-			else
-				printf("%s", fault_chars[fault_type]);
-		}
-		for(; m < 16; ++m )
-			printf("   ");
-		printf("  |");
-		for( m = 0; m < r; ++m ){
-			if( m < nr ){
-				c = temp[m];
-				putchar(' ' <= c && c <= '~'? c: '.');
-			} else
-				putchar(' ');
-		}
-		n -= r;
-		for(; m < 16; ++m )
-			putchar(' ');
-		printf("|\n");
-		if( nr < r )
-			break;
-	}
-}
-
-int
-ppc_inst_dump(unsigned adr, int count)
-{
-	int nr, dotted;
-	unsigned first_adr;
-	unsigned long inst, last_inst = 0;
-	unsigned char val[4];
-
-	dotted = 0;
-	for (first_adr = adr; count > 0; --count, adr += 4){
-		nr = mread(adr, val, 4);
-		if( nr == 0 ){
-			const char *x = fault_chars[fault_type];
-			printf("%.8x  %s%s%s%s\n", adr, x, x, x, x);
-			break;
-		}
-		inst = GETWORD(val);
-		if (adr > first_adr && inst == last_inst) {
-			if (!dotted) {
-				printf(" ...\n");
-				dotted = 1;
-			}
-			continue;
-		}
-		dotted = 0;
-		last_inst = inst;
-		printf("%.8x  ", adr);
-		printf("%.8x\t", inst);
-		print_insn_big_powerpc(stdout, inst, adr);	/* always returns 4 */
-		printf("\n");
-	}
-	return adr - first_adr;
-}
-
-void
-print_address(unsigned addr)
-{
-	printf("0x%x", addr);
-}
-
-/*
- * Memory operations - move, set, print differences
- */
-static unsigned mdest;		/* destination address */
-static unsigned msrc;		/* source address */
-static unsigned mval;		/* byte value to set memory to */
-static unsigned mcount;		/* # bytes to affect */
-static unsigned mdiffs;		/* max # differences to print */
-
-void
-memops(int cmd)
-{
-	scanhex(&mdest);
-	if( termch != '\n' )
-		termch = 0;
-	scanhex(cmd == 's'? &mval: &msrc);
-	if( termch != '\n' )
-		termch = 0;
-	scanhex(&mcount);
-	switch( cmd ){
-	case 'm':
-		memmove((void *)mdest, (void *)msrc, mcount);
-		break;
-	case 's':
-		memset((void *)mdest, mval, mcount);
-		break;
-	case 'd':
-		if( termch != '\n' )
-			termch = 0;
-		scanhex(&mdiffs);
-		memdiffs((unsigned char *)mdest, (unsigned char *)msrc, mcount, mdiffs);
-		break;
-	}
-}
-
-void
-memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
-{
-	unsigned n, prt;
-
-	prt = 0;
-	for( n = nb; n > 0; --n )
-		if( *p1++ != *p2++ )
-			if( ++prt <= maxpr )
-				printf("%.8x %.2x # %.8x %.2x\n", (unsigned)p1 - 1,
-					p1[-1], (unsigned)p2 - 1, p2[-1]);
-	if( prt > maxpr )
-		printf("Total of %d differences\n", prt);
-}
-
-static unsigned mend;
-static unsigned mask;
-
-void
-memlocate(void)
-{
-	unsigned a, n;
-	unsigned char val[4];
-
-	last_cmd = "ml";
-	scanhex(&mdest);
-	if (termch != '\n') {
-		termch = 0;
-		scanhex(&mend);
-		if (termch != '\n') {
-			termch = 0;
-			scanhex(&mval);
-			mask = ~0;
-			if (termch != '\n') termch = 0;
-			scanhex(&mask);
-		}
-	}
-	n = 0;
-	for (a = mdest; a < mend; a += 4) {
-		if (mread(a, val, 4) == 4
-			&& ((GETWORD(val) ^ mval) & mask) == 0) {
-			printf("%.8x:  %.8x\n", a, GETWORD(val));
-			if (++n >= 10)
-				break;
-		}
-	}
-}
-
-static unsigned mskip = 0x1000;
-static unsigned mlim = 0xffffffff;
-
-void
-memzcan(void)
-{
-	unsigned char v;
-	unsigned a;
-	int ok, ook;
-
-	scanhex(&mdest);
-	if (termch != '\n') termch = 0;
-	scanhex(&mskip);
-	if (termch != '\n') termch = 0;
-	scanhex(&mlim);
-	ook = 0;
-	for (a = mdest; a < mlim; a += mskip) {
-		ok = mread(a, &v, 1);
-		if (ok && !ook) {
-			printf("%.8x .. ", a);
-			fflush(stdout);
-		} else if (!ok && ook)
-			printf("%.8x\n", a - mskip);
-		ook = ok;
-		if (a + mskip < a)
-			break;
-	}
-	if (ook)
-		printf("%.8x\n", a - mskip);
-}
-
-void proccall(void)
-{
-	unsigned int args[8];
-	unsigned int ret;
-	int i;
-	typedef unsigned int (*callfunc_t)(unsigned int, unsigned int,
-			unsigned int, unsigned int, unsigned int,
-			unsigned int, unsigned int, unsigned int);
-	callfunc_t func;
-
-	scanhex(&adrs);
-	if (termch != '\n')
-		termch = 0;
-	for (i = 0; i < 8; ++i)
-		args[i] = 0;
-	for (i = 0; i < 8; ++i) {
-		if (!scanhex(&args[i]) || termch == '\n')
-			break;
-		termch = 0;
-	}
-	func = (callfunc_t) adrs;
-	ret = 0;
-	if (setjmp(bus_error_jmp) == 0) {
-		debugger_fault_handler = handle_fault;
-		sync();
-		ret = func(args[0], args[1], args[2], args[3],
-			   args[4], args[5], args[6], args[7]);
-		sync();
-		printf("return value is %x\n", ret);
-	} else {
-		printf("*** %x exception occurred\n", fault_except);
-	}
-	debugger_fault_handler = NULL;
-}
-
-/* Input scanning routines */
-int
-skipbl(void)
-{
-	int c;
-
-	if( termch != 0 ){
-		c = termch;
-		termch = 0;
-	} else
-		c = inchar();
-	while( c == ' ' || c == '\t' )
-		c = inchar();
-	return c;
-}
-
-#define N_PTREGS	44
-static char *regnames[N_PTREGS] = {
-	"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
-	"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
-	"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
-	"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
-	"pc", "msr", "or3", "ctr", "lr", "xer", "ccr", "mq",
-	"trap", "dar", "dsisr", "res"
-};
-
-int
-scanhex(unsigned *vp)
-{
-	int c, d;
-	unsigned v;
-
-	c = skipbl();
-	if (c == '%') {
-		/* parse register name */
-		char regname[8];
-		int i;
-
-		for (i = 0; i < sizeof(regname) - 1; ++i) {
-			c = inchar();
-			if (!isalnum(c)) {
-				termch = c;
-				break;
-			}
-			regname[i] = c;
-		}
-		regname[i] = 0;
-		for (i = 0; i < N_PTREGS; ++i) {
-			if (strcmp(regnames[i], regname) == 0) {
-				unsigned *rp = (unsigned *)
-					xmon_regs[smp_processor_id()];
-				if (rp == NULL) {
-					printf("regs not available\n");
-					return 0;
-				}
-				*vp = rp[i];
-				return 1;
-			}
-		}
-		printf("invalid register name '%%%s'\n", regname);
-		return 0;
-	} else if (c == '$') {
-		static char symname[128];
-		int i;
-		for (i=0; i<63; i++) {
-			c = inchar();
-			if (isspace(c)) {
-				termch = c;
-				break;
-			}
-			symname[i] = c;
-		}
-		symname[i++] = 0;
-		*vp = 0;
-		if (setjmp(bus_error_jmp) == 0) {
-			debugger_fault_handler = handle_fault;
-			sync();
-			*vp = kallsyms_lookup_name(symname);
-			sync();
-		}
-		debugger_fault_handler = NULL;
-		if (!(*vp)) {
-			printf("unknown symbol\n");
-			return 0;
-		}
-		return 1;
-	}
-
-	d = hexdigit(c);
-	if( d == EOF ){
-		termch = c;
-		return 0;
-	}
-	v = 0;
-	do {
-		v = (v << 4) + d;
-		c = inchar();
-		d = hexdigit(c);
-	} while( d != EOF );
-	termch = c;
-	*vp = v;
-	return 1;
-}
-
-void
-scannl(void)
-{
-	int c;
-
-	c = termch;
-	termch = 0;
-	while( c != '\n' )
-		c = inchar();
-}
-
-int hexdigit(int c)
-{
-	if( '0' <= c && c <= '9' )
-		return c - '0';
-	if( 'A' <= c && c <= 'F' )
-		return c - ('A' - 10);
-	if( 'a' <= c && c <= 'f' )
-		return c - ('a' - 10);
-	return EOF;
-}
-
-void
-getstring(char *s, int size)
-{
-	int c;
-
-	c = skipbl();
-	do {
-		if( size > 1 ){
-			*s++ = c;
-			--size;
-		}
-		c = inchar();
-	} while( c != ' ' && c != '\t' && c != '\n' );
-	termch = c;
-	*s = 0;
-}
-
-static char line[256];
-static char *lineptr;
-
-void
-flush_input(void)
-{
-	lineptr = NULL;
-}
-
-int
-inchar(void)
-{
-	if (lineptr == NULL || *lineptr == 0) {
-		if (fgets(line, sizeof(line), stdin) == NULL) {
-			lineptr = NULL;
-			return EOF;
-		}
-		lineptr = line;
-	}
-	return *lineptr++;
-}
-
-void
-take_input(char *str)
-{
-	lineptr = str;
-}
-
-static void
-symbol_lookup(void)
-{
-	int type = inchar();
-	unsigned addr;
-	static char tmp[128];
-
-	switch (type) {
-	case 'a':
-		if (scanhex(&addr))
-			xmon_print_symbol(addr, ": ", "\n");
-		termch = 0;
-		break;
-	case 's':
-		getstring(tmp, 64);
-		if (setjmp(bus_error_jmp) == 0) {
-			debugger_fault_handler = handle_fault;
-			sync();
-			addr = kallsyms_lookup_name(tmp);
-			if (addr)
-				printf("%s: %lx\n", tmp, addr);
-			else
-				printf("Symbol '%s' not found.\n", tmp);
-			sync();
-		}
-		debugger_fault_handler = NULL;
-		termch = 0;
-		break;
-	}
-}
-
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 107e492cb47e..2ed88122be93 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -146,6 +146,7 @@ config MATHEMU
 config COMPAT
 	bool "Kernel support for 31 bit emulation"
 	depends on 64BIT
+	select COMPAT_BINFMT_ELF
 	help
 	  Select this option if you want to enable your system kernel to
 	  handle system-calls from ELF binaries for 31 bit ESA.  This option
@@ -288,7 +289,7 @@ config WARN_STACK_SIZE
 	int "Maximum frame size considered safe (128-2048)"
 	range 128 2048
 	depends on WARN_STACK
-	default "256"
+	default "2048"
 	help
 	  This allows you to specify the maximum frame size a function may
 	  have without the compiler complaining about it.
@@ -312,6 +313,10 @@ config ARCH_SPARSEMEM_DEFAULT
 config ARCH_SELECT_MEMORY_MODEL
        def_bool y
 
+config ARCH_ENABLE_MEMORY_HOTPLUG
+	def_bool y
+	depends on SPARSEMEM
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
@@ -344,6 +349,22 @@ config QDIO_DEBUG
 
 	  If unsure, say N.
 
+config CHSC_SCH
+	tristate "Support for CHSC subchannels"
+	help
+	  This driver allows usage of CHSC subchannels. A CHSC subchannel
+	  is usually present on LPAR only.
+	  The driver creates a device /dev/chsc, which may be used to
+	  obtain I/O configuration information about the machine and
+	  to issue asynchronous chsc commands (DANGEROUS).
+	  You will usually only want to use this interface on a special
+	  LPAR designated for system management.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chsc_sch.
+
+	  If unsure, say N.
+
 comment "Misc"
 
 config IPL
@@ -544,6 +565,7 @@ bool "s390 guest support (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTIO
 	select VIRTIO_RING
+	select VIRTIO_CONSOLE
 	help
 	  Select this option if you want to run the kernel under s390 linux
 endmenu
diff --git a/arch/s390/appldata/appldata.h b/arch/s390/appldata/appldata.h
index db3ae8505103..17a2636fec0a 100644
--- a/arch/s390/appldata/appldata.h
+++ b/arch/s390/appldata/appldata.h
@@ -3,13 +3,11 @@
  *
  * Definitions and interface for Linux - z/VM Monitor Stream.
  *
- * Copyright (C) 2003,2006 IBM Corporation, IBM Deutschland Entwicklung GmbH.
+ * Copyright IBM Corp. 2003, 2008
  *
  * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
 
-//#define APPLDATA_DEBUG			/* Debug messages on/off */
-
 #define APPLDATA_MAX_REC_SIZE	  4024	/* Maximum size of the */
 					/* data buffer */
 #define APPLDATA_MAX_PROCS 100
@@ -32,12 +30,6 @@
 #define P_ERROR(x...)	printk(KERN_ERR MY_PRINT_NAME " error: " x)
 #define P_WARNING(x...)	printk(KERN_WARNING MY_PRINT_NAME " status: " x)
 
-#ifdef APPLDATA_DEBUG
-#define P_DEBUG(x...)   printk(KERN_DEBUG MY_PRINT_NAME " debug: " x)
-#else
-#define P_DEBUG(x...)   do {} while (0)
-#endif
-
 struct appldata_ops {
 	struct list_head list;
 	struct ctl_table_header *sysctl_header;
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index ad40729bec3d..a7f8979fb925 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -5,7 +5,7 @@
  * Exports appldata_register_ops() and appldata_unregister_ops() for the
  * data gathering modules.
  *
- * Copyright (C) 2003,2006 IBM Corporation, IBM Deutschland Entwicklung GmbH.
+ * Copyright IBM Corp. 2003, 2008
  *
  * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
@@ -108,9 +108,6 @@ static LIST_HEAD(appldata_ops_list);
  */
 static void appldata_timer_function(unsigned long data)
 {
-	P_DEBUG("   -= Timer =-\n");
-	P_DEBUG("CPU: %i, expire_count: %i\n", smp_processor_id(),
-		atomic_read(&appldata_expire_count));
 	if (atomic_dec_and_test(&appldata_expire_count)) {
 		atomic_set(&appldata_expire_count, num_online_cpus());
 		queue_work(appldata_wq, (struct work_struct *) data);
@@ -128,14 +125,11 @@ static void appldata_work_fn(struct work_struct *work)
 	struct appldata_ops *ops;
 	int i;
 
-	P_DEBUG("  -= Work Queue =-\n");
 	i = 0;
 	get_online_cpus();
 	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
 		ops = list_entry(lh, struct appldata_ops, list);
-		P_DEBUG("list_for_each loop: %i) active = %u, name = %s\n",
-			++i, ops->active, ops->name);
 		if (ops->active == 1) {
 			ops->callback(ops->data);
 		}
@@ -209,10 +203,9 @@ __appldata_vtimer_setup(int cmd)
 			per_cpu(appldata_timer, i).expires = per_cpu_interval;
 			smp_call_function_single(i, add_virt_timer_periodic,
 						 &per_cpu(appldata_timer, i),
-						 0, 1);
+						 1);
 		}
 		appldata_timer_active = 1;
-		P_INFO("Monitoring timer started.\n");
 		break;
 	case APPLDATA_DEL_TIMER:
 		for_each_online_cpu(i)
@@ -221,7 +214,6 @@ __appldata_vtimer_setup(int cmd)
 			break;
 		appldata_timer_active = 0;
 		atomic_set(&appldata_expire_count, num_online_cpus());
-		P_INFO("Monitoring timer stopped.\n");
 		break;
 	case APPLDATA_MOD_TIMER:
 		per_cpu_interval = (u64) (appldata_interval*1000 /
@@ -236,7 +228,7 @@ __appldata_vtimer_setup(int cmd)
 			args.timer = &per_cpu(appldata_timer, i);
 			args.expires = per_cpu_interval;
 			smp_call_function_single(i, __appldata_mod_vtimer_wrap,
-						 &args, 0, 1);
+						 &args, 1);
 		}
 	}
 }
@@ -313,10 +305,8 @@ appldata_interval_handler(ctl_table *ctl, int write, struct file *filp,
 	}
 	interval = 0;
 	sscanf(buf, "%i", &interval);
-	if (interval <= 0) {
-		P_ERROR("Timer CPU interval has to be > 0!\n");
+	if (interval <= 0)
 		return -EINVAL;
-	}
 
 	get_online_cpus();
 	spin_lock(&appldata_timer_lock);
@@ -324,9 +314,6 @@ appldata_interval_handler(ctl_table *ctl, int write, struct file *filp,
 	__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
 	spin_unlock(&appldata_timer_lock);
 	put_online_cpus();
-
-	P_INFO("Monitoring CPU interval set to %u milliseconds.\n",
-		 interval);
 out:
 	*lenp = len;
 	*ppos += len;
@@ -406,23 +393,16 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 			P_ERROR("START DIAG 0xDC for %s failed, "
 				"return code: %d\n", ops->name, rc);
 			module_put(ops->owner);
-		} else {
-			P_INFO("Monitoring %s data enabled, "
-				"DIAG 0xDC started.\n", ops->name);
+		} else
 			ops->active = 1;
-		}
 	} else if ((buf[0] == '0') && (ops->active == 1)) {
 		ops->active = 0;
 		rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
 				(unsigned long) ops->data, ops->size,
 				ops->mod_lvl);
-		if (rc != 0) {
+		if (rc != 0)
 			P_ERROR("STOP DIAG 0xDC for %s failed, "
 				"return code: %d\n", ops->name, rc);
-		} else {
-			P_INFO("Monitoring %s data disabled, "
-				"DIAG 0xDC stopped.\n", ops->name);
-		}
 		module_put(ops->owner);
 	}
 	spin_unlock(&appldata_ops_lock);
@@ -468,7 +448,6 @@ int appldata_register_ops(struct appldata_ops *ops)
 	ops->sysctl_header = register_sysctl_table(ops->ctl_table);
 	if (!ops->sysctl_header)
 		goto out;
-	P_INFO("%s-ops registered!\n", ops->name);
 	return 0;
 out:
 	spin_lock(&appldata_ops_lock);
@@ -490,7 +469,6 @@ void appldata_unregister_ops(struct appldata_ops *ops)
 	spin_unlock(&appldata_ops_lock);
 	unregister_sysctl_table(ops->sysctl_header);
 	kfree(ops->ctl_table);
-	P_INFO("%s-ops unregistered!\n", ops->name);
 }
 /********************** module-ops management <END> **************************/
 
@@ -553,14 +531,9 @@ static int __init appldata_init(void)
 {
 	int i;
 
-	P_DEBUG("sizeof(parameter_list) = %lu\n",
-		sizeof(struct appldata_parameter_list));
-
 	appldata_wq = create_singlethread_workqueue("appldata");
-	if (!appldata_wq) {
-		P_ERROR("Could not create work queue\n");
+	if (!appldata_wq)
 		return -ENOMEM;
-	}
 
 	get_online_cpus();
 	for_each_online_cpu(i)
@@ -571,8 +544,6 @@ static int __init appldata_init(void)
 	register_hotcpu_notifier(&appldata_nb);
 
 	appldata_sysctl_header = register_sysctl_table(appldata_dir_table);
-
-	P_DEBUG("Base interface initialized.\n");
 	return 0;
 }
 
@@ -584,7 +555,9 @@ EXPORT_SYMBOL_GPL(appldata_register_ops);
 EXPORT_SYMBOL_GPL(appldata_unregister_ops);
 EXPORT_SYMBOL_GPL(appldata_diag);
 
+#ifdef CONFIG_SWAP
 EXPORT_SYMBOL_GPL(si_swapinfo);
+#endif
 EXPORT_SYMBOL_GPL(nr_threads);
 EXPORT_SYMBOL_GPL(nr_running);
 EXPORT_SYMBOL_GPL(nr_iowait);
diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c
index 51181ccdb87b..3ed56b7d1b2f 100644
--- a/arch/s390/appldata/appldata_mem.c
+++ b/arch/s390/appldata/appldata_mem.c
@@ -14,14 +14,13 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/kernel_stat.h>
-#include <asm/io.h>
 #include <linux/pagemap.h>
 #include <linux/swap.h>
+#include <asm/io.h>
 
 #include "appldata.h"
 
 
-#define MY_PRINT_NAME "appldata_mem"		/* for debug messages, etc. */
 #define P2K(x) ((x) << (PAGE_SHIFT - 10))	/* Converts #Pages to KB */
 
 /*
@@ -70,30 +69,6 @@ static struct appldata_mem_data {
 } __attribute__((packed)) appldata_mem_data;
 
 
-static inline void appldata_debug_print(struct appldata_mem_data *mem_data)
-{
-	P_DEBUG("--- MEM - RECORD ---\n");
-	P_DEBUG("pgpgin     = %8lu KB\n", mem_data->pgpgin);
-	P_DEBUG("pgpgout    = %8lu KB\n", mem_data->pgpgout);
-	P_DEBUG("pswpin     = %8lu Pages\n", mem_data->pswpin);
-	P_DEBUG("pswpout    = %8lu Pages\n", mem_data->pswpout);
-	P_DEBUG("pgalloc    = %8lu \n", mem_data->pgalloc);
-	P_DEBUG("pgfault    = %8lu \n", mem_data->pgfault);
-	P_DEBUG("pgmajfault = %8lu \n", mem_data->pgmajfault);
-	P_DEBUG("sharedram  = %8lu KB\n", mem_data->sharedram);
-	P_DEBUG("totalram   = %8lu KB\n", mem_data->totalram);
-	P_DEBUG("freeram    = %8lu KB\n", mem_data->freeram);
-	P_DEBUG("totalhigh  = %8lu KB\n", mem_data->totalhigh);
-	P_DEBUG("freehigh   = %8lu KB\n", mem_data->freehigh);
-	P_DEBUG("bufferram  = %8lu KB\n", mem_data->bufferram);
-	P_DEBUG("cached     = %8lu KB\n", mem_data->cached);
-	P_DEBUG("totalswap  = %8lu KB\n", mem_data->totalswap);
-	P_DEBUG("freeswap   = %8lu KB\n", mem_data->freeswap);
-	P_DEBUG("sync_count_1 = %u\n", mem_data->sync_count_1);
-	P_DEBUG("sync_count_2 = %u\n", mem_data->sync_count_2);
-	P_DEBUG("timestamp    = %lX\n", mem_data->timestamp);
-}
-
 /*
  * appldata_get_mem_data()
  *
@@ -140,9 +115,6 @@ static void appldata_get_mem_data(void *data)
 
 	mem_data->timestamp = get_clock();
 	mem_data->sync_count_2++;
-#ifdef APPLDATA_DEBUG
-	appldata_debug_print(mem_data);
-#endif
 }
 
 
@@ -164,17 +136,7 @@ static struct appldata_ops ops = {
  */
 static int __init appldata_mem_init(void)
 {
-	int rc;
-
-	P_DEBUG("sizeof(mem) = %lu\n", sizeof(struct appldata_mem_data));
-
-	rc = appldata_register_ops(&ops);
-	if (rc != 0) {
-		P_ERROR("Error registering ops, rc = %i\n", rc);
-	} else {
-		P_DEBUG("%s-ops registered!\n", ops.name);
-	}
-	return rc;
+	return appldata_register_ops(&ops);
 }
 
 /*
@@ -185,7 +147,6 @@ static int __init appldata_mem_init(void)
 static void __exit appldata_mem_exit(void)
 {
 	appldata_unregister_ops(&ops);
-	P_DEBUG("%s-ops unregistered!\n", ops.name);
 }
 
 
diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c
index 4d8344336001..3b746556e1a3 100644
--- a/arch/s390/appldata/appldata_net_sum.c
+++ b/arch/s390/appldata/appldata_net_sum.c
@@ -21,9 +21,6 @@
 #include "appldata.h"
 
 
-#define MY_PRINT_NAME	"appldata_net_sum"	/* for debug messages, etc. */
-
-
 /*
  * Network data
  *
@@ -60,26 +57,6 @@ static struct appldata_net_sum_data {
 } __attribute__((packed)) appldata_net_sum_data;
 
 
-static inline void appldata_print_debug(struct appldata_net_sum_data *net_data)
-{
-	P_DEBUG("--- NET - RECORD ---\n");
-
-	P_DEBUG("nr_interfaces = %u\n", net_data->nr_interfaces);
-	P_DEBUG("rx_packets    = %8lu\n", net_data->rx_packets);
-	P_DEBUG("tx_packets    = %8lu\n", net_data->tx_packets);
-	P_DEBUG("rx_bytes      = %8lu\n", net_data->rx_bytes);
-	P_DEBUG("tx_bytes      = %8lu\n", net_data->tx_bytes);
-	P_DEBUG("rx_errors     = %8lu\n", net_data->rx_errors);
-	P_DEBUG("tx_errors     = %8lu\n", net_data->tx_errors);
-	P_DEBUG("rx_dropped    = %8lu\n", net_data->rx_dropped);
-	P_DEBUG("tx_dropped    = %8lu\n", net_data->tx_dropped);
-	P_DEBUG("collisions    = %8lu\n", net_data->collisions);
-
-	P_DEBUG("sync_count_1 = %u\n", net_data->sync_count_1);
-	P_DEBUG("sync_count_2 = %u\n", net_data->sync_count_2);
-	P_DEBUG("timestamp    = %lX\n", net_data->timestamp);
-}
-
 /*
  * appldata_get_net_sum_data()
  *
@@ -135,9 +112,6 @@ static void appldata_get_net_sum_data(void *data)
 
 	net_data->timestamp = get_clock();
 	net_data->sync_count_2++;
-#ifdef APPLDATA_DEBUG
-	appldata_print_debug(net_data);
-#endif
 }
 
 
@@ -159,17 +133,7 @@ static struct appldata_ops ops = {
  */
 static int __init appldata_net_init(void)
 {
-	int rc;
-
-	P_DEBUG("sizeof(net) = %lu\n", sizeof(struct appldata_net_sum_data));
-
-	rc = appldata_register_ops(&ops);
-	if (rc != 0) {
-		P_ERROR("Error registering ops, rc = %i\n", rc);
-	} else {
-		P_DEBUG("%s-ops registered!\n", ops.name);
-	}
-	return rc;
+	return appldata_register_ops(&ops);
 }
 
 /*
@@ -180,7 +144,6 @@ static int __init appldata_net_init(void)
 static void __exit appldata_net_exit(void)
 {
 	appldata_unregister_ops(&ops);
-	P_DEBUG("%s-ops unregistered!\n", ops.name);
 }
 
 
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index 6b3eafe10453..eb44f9f8ab91 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -89,44 +89,6 @@ static struct appldata_ops ops = {
 };
 
 
-static inline void appldata_print_debug(struct appldata_os_data *os_data)
-{
-	int a0, a1, a2, i;
-
-	P_DEBUG("--- OS - RECORD ---\n");
-	P_DEBUG("nr_threads   = %u\n", os_data->nr_threads);
-	P_DEBUG("nr_running   = %u\n", os_data->nr_running);
-	P_DEBUG("nr_iowait    = %u\n", os_data->nr_iowait);
-	P_DEBUG("avenrun(int) = %8x / %8x / %8x\n", os_data->avenrun[0],
-		os_data->avenrun[1], os_data->avenrun[2]);
-	a0 = os_data->avenrun[0];
-	a1 = os_data->avenrun[1];
-	a2 = os_data->avenrun[2];
-	P_DEBUG("avenrun(float) = %d.%02d / %d.%02d / %d.%02d\n",
-		LOAD_INT(a0), LOAD_FRAC(a0), LOAD_INT(a1), LOAD_FRAC(a1),
-		LOAD_INT(a2), LOAD_FRAC(a2));
-
-	P_DEBUG("nr_cpus = %u\n", os_data->nr_cpus);
-	for (i = 0; i < os_data->nr_cpus; i++) {
-		P_DEBUG("cpu%u : user = %u, nice = %u, system = %u, "
-			"idle = %u, irq = %u, softirq = %u, iowait = %u, "
-			"steal = %u\n",
-				os_data->os_cpu[i].cpu_id,
-				os_data->os_cpu[i].per_cpu_user,
-				os_data->os_cpu[i].per_cpu_nice,
-				os_data->os_cpu[i].per_cpu_system,
-				os_data->os_cpu[i].per_cpu_idle,
-				os_data->os_cpu[i].per_cpu_irq,
-				os_data->os_cpu[i].per_cpu_softirq,
-				os_data->os_cpu[i].per_cpu_iowait,
-				os_data->os_cpu[i].per_cpu_steal);
-	}
-
-	P_DEBUG("sync_count_1 = %u\n", os_data->sync_count_1);
-	P_DEBUG("sync_count_2 = %u\n", os_data->sync_count_2);
-	P_DEBUG("timestamp    = %lX\n", os_data->timestamp);
-}
-
 /*
  * appldata_get_os_data()
  *
@@ -180,13 +142,10 @@ static void appldata_get_os_data(void *data)
 					   APPLDATA_START_INTERVAL_REC,
 					   (unsigned long) ops.data, new_size,
 					   ops.mod_lvl);
-			if (rc != 0) {
+			if (rc != 0)
 				P_ERROR("os: START NEW DIAG 0xDC failed, "
 					"return code: %d, new size = %i\n", rc,
 					new_size);
-				P_INFO("os: stopping old record now\n");
-			} else
-				P_INFO("os: new record size = %i\n", new_size);
 
 			rc = appldata_diag(APPLDATA_RECORD_OS_ID,
 					   APPLDATA_STOP_REC,
@@ -204,9 +163,6 @@ static void appldata_get_os_data(void *data)
 	}
 	os_data->timestamp = get_clock();
 	os_data->sync_count_2++;
-#ifdef APPLDATA_DEBUG
-	appldata_print_debug(os_data);
-#endif
 }
 
 
@@ -227,12 +183,9 @@ static int __init appldata_os_init(void)
 		rc = -ENOMEM;
 		goto out;
 	}
-	P_DEBUG("max. sizeof(os) = %i, sizeof(os_cpu) = %lu\n", max_size,
-		sizeof(struct appldata_os_per_cpu));
 
 	appldata_os_data = kzalloc(max_size, GFP_DMA);
 	if (appldata_os_data == NULL) {
-		P_ERROR("No memory for %s!\n", ops.name);
 		rc = -ENOMEM;
 		goto out;
 	}
@@ -240,17 +193,12 @@ static int __init appldata_os_init(void)
 	appldata_os_data->per_cpu_size = sizeof(struct appldata_os_per_cpu);
 	appldata_os_data->cpu_offset   = offsetof(struct appldata_os_data,
 							os_cpu);
-	P_DEBUG("cpu offset = %u\n", appldata_os_data->cpu_offset);
 
 	ops.data = appldata_os_data;
 	ops.callback  = &appldata_get_os_data;
 	rc = appldata_register_ops(&ops);
-	if (rc != 0) {
-		P_ERROR("Error registering ops, rc = %i\n", rc);
+	if (rc != 0)
 		kfree(appldata_os_data);
-	} else {
-		P_DEBUG("%s-ops registered!\n", ops.name);
-	}
 out:
 	return rc;
 }
@@ -264,7 +212,6 @@ static void __exit appldata_os_exit(void)
 {
 	appldata_unregister_ops(&ops);
 	kfree(appldata_os_data);
-	P_DEBUG("%s-ops unregistered!\n", ops.name);
 }
 
 
diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h
index 9992f95ef992..0ef9829f2ad6 100644
--- a/arch/s390/crypto/crypt_s390.h
+++ b/arch/s390/crypto/crypt_s390.h
@@ -296,6 +296,10 @@ static inline int crypt_s390_func_available(int func)
 	unsigned char status[16];
 	int ret;
 
+	/* check if CPACF facility (bit 17) is available */
+	if (!(stfl() & 1ULL << (31 - 17)))
+		return 0;
+
 	switch (func & CRYPT_S390_OP_MASK) {
 	case CRYPT_S390_KM:
 		ret = crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0);
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index 0cfefddd8375..eca724d229ec 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -6,6 +6,7 @@
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/smp_lock.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -48,6 +49,7 @@ static unsigned char parm_block[32] = {
 
 static int prng_open(struct inode *inode, struct file *file)
 {
+	cycle_kernel_lock();
 	return nonseekable_open(inode, file);
 }
 
@@ -185,11 +187,8 @@ static int __init prng_init(void)
 	prng_seed(16);
 
 	ret = misc_register(&prng_dev);
-	if (ret) {
-		printk(KERN_WARNING
-		       "Could not register misc device for PRNG.\n");
+	if (ret)
 		goto out_buf;
-	}
 	return 0;
 
 out_buf:
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 4b010ff814c9..7383781f3e6a 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -150,33 +150,24 @@ static ssize_t hypfs_aio_read(struct kiocb *iocb, const struct iovec *iov,
 			      unsigned long nr_segs, loff_t offset)
 {
 	char *data;
-	size_t len;
+	ssize_t ret;
 	struct file *filp = iocb->ki_filp;
 	/* XXX: temporary */
 	char __user *buf = iov[0].iov_base;
 	size_t count = iov[0].iov_len;
 
-	if (nr_segs != 1) {
-		count = -EINVAL;
-		goto out;
-	}
+	if (nr_segs != 1)
+		return -EINVAL;
 
 	data = filp->private_data;
-	len = strlen(data);
-	if (offset > len) {
-		count = 0;
-		goto out;
-	}
-	if (count > len - offset)
-		count = len - offset;
-	if (copy_to_user(buf, data + offset, count)) {
-		count = -EFAULT;
-		goto out;
-	}
-	iocb->ki_pos += count;
+	ret = simple_read_from_buffer(buf, count, &offset, data, strlen(data));
+	if (ret <= 0)
+		return ret;
+
+	iocb->ki_pos += ret;
 	file_accessed(filp);
-out:
-	return count;
+
+	return ret;
 }
 static ssize_t hypfs_aio_write(struct kiocb *iocb, const struct iovec *iov,
 			      unsigned long nr_segs, loff_t offset)
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 6302f5082588..50f657e77344 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -7,9 +7,14 @@
 #
 CFLAGS_smp.o	:= -Wno-nonnull
 
+#
+# Pass UTS_MACHINE for user_regset definition
+#
+CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
+
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o \
             setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
-	    s390_ext.o debug.o irq.o ipl.o dis.o diag.o
+	    s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
@@ -23,7 +28,7 @@ obj-$(CONFIG_AUDIT)		+= audit.o
 compat-obj-$(CONFIG_AUDIT)	+= compat_audit.o
 obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o \
 					compat_wrapper.o compat_exec_domain.o \
-					binfmt_elf32.o $(compat-obj-y)
+					$(compat-obj-y)
 
 obj-$(CONFIG_VIRT_TIMER)	+= vtime.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
diff --git a/arch/s390/kernel/binfmt_elf32.c b/arch/s390/kernel/binfmt_elf32.c
deleted file mode 100644
index 3e1c315b736d..000000000000
--- a/arch/s390/kernel/binfmt_elf32.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Support for 32-bit Linux for S390 ELF binaries.
- *
- * Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Gerhard Tonn (ton@de.ibm.com)
- *
- * Heavily inspired by the 32-bit Sparc compat code which is
- * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com)
- * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek   (jj@ultra.linux.cz)
- */
-
-#define __ASMS390_ELF_H
-
-#include <linux/time.h>
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-#define ELF_ARCH	EM_S390
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
-	(((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
-         && (x)->e_ident[EI_CLASS] == ELF_CLASS)
-
-/* ELF register definitions */
-#define NUM_GPRS      16
-#define NUM_FPRS      16
-#define NUM_ACRS      16    
-
-/* For SVR4/S390 the function pointer to be registered with `atexit` is
-   passed in R14. */
-#define ELF_PLAT_INIT(_r, load_addr) \
-	do { \
-		_r->gprs[14] = 0; \
-	} while(0)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE       4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
-
-/* Wow, the "main" arch needs arch dependent functions too.. :) */
-
-/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
-   now struct_user_regs, they are different) */
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) dump_regs32(regs, &pr_reg);
-
-#define ELF_CORE_COPY_TASK_REGS(tsk, regs) dump_task_regs32(tsk, regs)
-
-#define ELF_CORE_COPY_FPREGS(tsk, fpregs) dump_task_fpu(tsk, fpregs)
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports. */
-
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define ELF_PLATFORM (NULL)
-
-#define SET_PERSONALITY(ex, ibcs2)			\
-do {							\
-	if (ibcs2)                                      \
-		set_personality(PER_SVR4);              \
-	else if (current->personality != PER_LINUX32)   \
-		set_personality(PER_LINUX);             \
-	set_thread_flag(TIF_31BIT);			\
-} while (0)
-
-#include "compat_linux.h"
-
-typedef _s390_fp_regs32 elf_fpregset_t;
-
-typedef struct
-{
-	
-	_psw_t32	psw;
-	__u32		gprs[__NUM_GPRS]; 
-	__u32		acrs[__NUM_ACRS]; 
-	__u32		orig_gpr2;
-} s390_regs32;
-typedef s390_regs32 elf_gregset_t;
-
-static inline int dump_regs32(struct pt_regs *ptregs, elf_gregset_t *regs)
-{
-	int i;
-
-	memcpy(&regs->psw.mask, &ptregs->psw.mask, 4);
-	memcpy(&regs->psw.addr, (char *)&ptregs->psw.addr + 4, 4);
-	for (i = 0; i < NUM_GPRS; i++)
-		regs->gprs[i] = ptregs->gprs[i];
-	save_access_regs(regs->acrs);
-	regs->orig_gpr2 = ptregs->orig_gpr2;
-	return 1;
-}
-
-static inline int dump_task_regs32(struct task_struct *tsk, elf_gregset_t *regs)
-{
-	struct pt_regs *ptregs = task_pt_regs(tsk);
-	int i;
-
-	memcpy(&regs->psw.mask, &ptregs->psw.mask, 4);
-	memcpy(&regs->psw.addr, (char *)&ptregs->psw.addr + 4, 4);
-	for (i = 0; i < NUM_GPRS; i++)
-		regs->gprs[i] = ptregs->gprs[i];
-	memcpy(regs->acrs, tsk->thread.acrs, sizeof(regs->acrs));
-	regs->orig_gpr2 = ptregs->orig_gpr2;
-	return 1;
-}
-
-static inline int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
-{
-	if (tsk == current)
-		save_fp_regs((s390_fp_regs *) fpregs);
-	else
-		memcpy(fpregs, &tsk->thread.fp_regs, sizeof(elf_fpregset_t));
-	return 1;
-}
-
-#include <asm/processor.h>
-#include <asm/pgalloc.h>
-#include <linux/module.h>
-#include <linux/elfcore.h>
-#include <linux/binfmts.h>
-#include <linux/compat.h>
-
-#define elf_prstatus elf_prstatus32
-struct elf_prstatus32
-{
-	struct elf_siginfo pr_info;	/* Info associated with signal */
-	short	pr_cursig;		/* Current signal */
-	u32	pr_sigpend;	/* Set of pending signals */
-	u32	pr_sighold;	/* Set of held signals */
-	pid_t	pr_pid;
-	pid_t	pr_ppid;
-	pid_t	pr_pgrp;
-	pid_t	pr_sid;
-	struct compat_timeval pr_utime;	/* User time */
-	struct compat_timeval pr_stime;	/* System time */
-	struct compat_timeval pr_cutime;	/* Cumulative user time */
-	struct compat_timeval pr_cstime;	/* Cumulative system time */
-	elf_gregset_t pr_reg;	/* GP registers */
-	int pr_fpvalid;		/* True if math co-processor being used.  */
-};
-
-#define elf_prpsinfo elf_prpsinfo32
-struct elf_prpsinfo32
-{
-	char	pr_state;	/* numeric process state */
-	char	pr_sname;	/* char for pr_state */
-	char	pr_zomb;	/* zombie */
-	char	pr_nice;	/* nice val */
-	u32	pr_flag;	/* flags */
-	u16	pr_uid;
-	u16	pr_gid;
-	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
-	/* Lots missing */
-	char	pr_fname[16];	/* filename of executable */
-	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
-};
-
-#include <linux/highuid.h>
-
-/*
-#define init_elf_binfmt init_elf32_binfmt
-*/
-
-#undef start_thread
-#define start_thread                    start_thread31 
-
-static inline void start_thread31(struct pt_regs *regs, unsigned long new_psw,
-				  unsigned long new_stackp)
-{
-	set_fs(USER_DS);
-	regs->psw.mask	= psw_user32_bits;
-	regs->psw.addr	= new_psw;
-	regs->gprs[15]	= new_stackp;
-	crst_table_downgrade(current->mm, 1UL << 31);
-}
-
-MODULE_DESCRIPTION("Binary format loader for compatibility with 32bit Linux for S390 binaries,"
-                   " Copyright 2000 IBM Corporation"); 
-MODULE_AUTHOR("Gerhard Tonn <ton@de.ibm.com>");
-
-#undef MODULE_DESCRIPTION
-#undef MODULE_AUTHOR
-
-#undef cputime_to_timeval
-#define cputime_to_timeval cputime_to_compat_timeval
-static inline void
-cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value)
-{
-	value->tv_usec = cputime % 1000000;
-	value->tv_sec = cputime / 1000000;
-}
-
-#include "../../../fs/binfmt_elf.c"
-
diff --git a/arch/s390/kernel/compat_ptrace.h b/arch/s390/kernel/compat_ptrace.h
index 419aef913ee1..cde81fa64f89 100644
--- a/arch/s390/kernel/compat_ptrace.h
+++ b/arch/s390/kernel/compat_ptrace.h
@@ -1,7 +1,7 @@
 #ifndef _PTRACE32_H
 #define _PTRACE32_H
 
-#include "compat_linux.h"  /* needed for _psw_t32 */
+#include "compat_linux.h"  /* needed for psw_compat_t */
 
 typedef struct {
 	__u32 cr[3];
@@ -38,7 +38,7 @@ typedef struct {
 
 struct user_regs_struct32
 {
-	_psw_t32 psw;
+	psw_compat_t psw;
 	u32 gprs[NUM_GPRS];
 	u32 acrs[NUM_ACRS];
 	u32 orig_gpr2;
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index c93d1296cc0a..d80fcd4a7fe1 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -1079,7 +1079,6 @@ __init debug_init(void)
 	s390dbf_sysctl_header = register_sysctl_table(s390dbf_dir_table);
 	mutex_lock(&debug_mutex);
 	debug_debugfs_root_entry = debugfs_create_dir(DEBUG_DIR_ROOT,NULL);
-	printk(KERN_INFO "debug: Initialization complete\n");
 	initialized = 1;
 	mutex_unlock(&debug_mutex);
 
@@ -1193,7 +1192,6 @@ debug_get_uint(char *buf)
 	for(; isspace(*buf); buf++);
 	rc = simple_strtoul(buf, &buf, 10);
 	if(*buf){
-		printk("debug: no integer specified!\n");
 		rc = -EINVAL;
 	}
 	return rc;
@@ -1340,19 +1338,12 @@ static void debug_flush(debug_info_t* id, int area)
                         	memset(id->areas[i][j], 0, PAGE_SIZE);
 			}
 		}
-                printk(KERN_INFO "debug: %s: all areas flushed\n",id->name);
         } else if(area >= 0 && area < id->nr_areas) {
                 id->active_entries[area] = 0;
 		id->active_pages[area] = 0;
 		for(i = 0; i < id->pages_per_area; i++) {
                 	memset(id->areas[area][i],0,PAGE_SIZE);
 		}
-                printk(KERN_INFO "debug: %s: area %i has been flushed\n",
-                        id->name, area);
-        } else {
-                printk(KERN_INFO
-                      "debug: %s: area %i cannot be flushed (range: %i - %i)\n",
-                        id->name, area, 0, id->nr_areas-1);
         }
         spin_unlock_irqrestore(&id->lock,flags);
 }
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index d0e09684b9ce..2a2ca268b1dd 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/pfn.h>
 #include <linux/uaccess.h>
+#include <asm/ebcdic.h>
 #include <asm/ipl.h>
 #include <asm/lowcore.h>
 #include <asm/processor.h>
@@ -26,12 +27,40 @@
 /*
  * Create a Kernel NSS if the SAVESYS= parameter is defined
  */
-#define DEFSYS_CMD_SIZE		96
+#define DEFSYS_CMD_SIZE		128
 #define SAVESYS_CMD_SIZE	32
 
 char kernel_nss_name[NSS_NAME_SIZE + 1];
 
+static void __init setup_boot_command_line(void);
+
+
 #ifdef CONFIG_SHARED_KERNEL
+int __init savesys_ipl_nss(char *cmd, const int cmdlen);
+
+asm(
+	"	.section .init.text,\"ax\",@progbits\n"
+	"	.align	4\n"
+	"	.type	savesys_ipl_nss, @function\n"
+	"savesys_ipl_nss:\n"
+#ifdef CONFIG_64BIT
+	"	stmg	6,15,48(15)\n"
+	"	lgr	14,3\n"
+	"	sam31\n"
+	"	diag	2,14,0x8\n"
+	"	sam64\n"
+	"	lgr	2,14\n"
+	"	lmg	6,15,48(15)\n"
+#else
+	"	stm	6,15,24(15)\n"
+	"	lr	14,3\n"
+	"	diag	2,14,0x8\n"
+	"	lr	2,14\n"
+	"	lm	6,15,24(15)\n"
+#endif
+	"	br	14\n"
+	"	.size	savesys_ipl_nss, .-savesys_ipl_nss\n");
+
 static noinline __init void create_kernel_nss(void)
 {
 	unsigned int i, stext_pfn, eshared_pfn, end_pfn, min_size;
@@ -39,6 +68,7 @@ static noinline __init void create_kernel_nss(void)
 	unsigned int sinitrd_pfn, einitrd_pfn;
 #endif
 	int response;
+	size_t len;
 	char *savesys_ptr;
 	char upper_command_line[COMMAND_LINE_SIZE];
 	char defsys_cmd[DEFSYS_CMD_SIZE];
@@ -49,8 +79,8 @@ static noinline __init void create_kernel_nss(void)
 		return;
 
 	/* Convert COMMAND_LINE to upper case */
-	for (i = 0; i < strlen(COMMAND_LINE); i++)
-		upper_command_line[i] = toupper(COMMAND_LINE[i]);
+	for (i = 0; i < strlen(boot_command_line); i++)
+		upper_command_line[i] = toupper(boot_command_line[i]);
 
 	savesys_ptr = strstr(upper_command_line, "SAVESYS=");
 
@@ -83,7 +113,8 @@ static noinline __init void create_kernel_nss(void)
 	}
 #endif
 
-	sprintf(defsys_cmd, "%s EW MINSIZE=%.7iK", defsys_cmd, min_size);
+	sprintf(defsys_cmd, "%s EW MINSIZE=%.7iK PARMREGS=0-13",
+		defsys_cmd, min_size);
 	sprintf(savesys_cmd, "SAVESYS %s \n IPL %s",
 		kernel_nss_name, kernel_nss_name);
 
@@ -94,13 +125,24 @@ static noinline __init void create_kernel_nss(void)
 		return;
 	}
 
-	__cpcmd(savesys_cmd, NULL, 0, &response);
+	len = strlen(savesys_cmd);
+	ASCEBC(savesys_cmd, len);
+	response = savesys_ipl_nss(savesys_cmd, len);
 
-	if (response != strlen(savesys_cmd)) {
+	/* On success: response is equal to the command size,
+	 *	       max SAVESYS_CMD_SIZE
+	 * On error: response contains the numeric portion of cp error message.
+	 *	     for SAVESYS it will be >= 263
+	 */
+	if (response > SAVESYS_CMD_SIZE) {
 		kernel_nss_name[0] = '\0';
 		return;
 	}
 
+	/* re-setup boot command line with new ipl vm parms */
+	ipl_update_parameters();
+	setup_boot_command_line();
+
 	ipl_flags = IPL_NSS_VALID;
 }
 
@@ -141,109 +183,11 @@ static noinline __init void detect_machine_type(void)
 	if (cpuinfo->cpu_id.version == 0xff)
 		machine_flags |= MACHINE_FLAG_VM;
 
-	/* Running on a P/390 ? */
-	if (cpuinfo->cpu_id.machine == 0x7490)
-		machine_flags |= MACHINE_FLAG_P390;
-
 	/* Running under KVM ? */
 	if (cpuinfo->cpu_id.version == 0xfe)
 		machine_flags |= MACHINE_FLAG_KVM;
 }
 
-#ifdef CONFIG_64BIT
-static noinline __init int memory_fast_detect(void)
-{
-	unsigned long val0 = 0;
-	unsigned long val1 = 0xc;
-	int ret = -ENOSYS;
-
-	if (ipl_flags & IPL_NSS_VALID)
-		return -ENOSYS;
-
-	asm volatile(
-		"	diag	%1,%2,0x260\n"
-		"0:	lhi	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (ret), "+d" (val0), "+d" (val1) : : "cc");
-
-	if (ret || val0 != val1)
-		return -ENOSYS;
-
-	memory_chunk[0].size = val0 + 1;
-	return 0;
-}
-#else
-static inline int memory_fast_detect(void)
-{
-	return -ENOSYS;
-}
-#endif
-
-static inline __init unsigned long __tprot(unsigned long addr)
-{
-	int cc = -1;
-
-	asm volatile(
-		"	tprot	0(%1),0\n"
-		"0:	ipm	%0\n"
-		"	srl	%0,28\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (cc) : "a" (addr) : "cc");
-	return (unsigned long)cc;
-}
-
-/* Checking memory in 128KB increments. */
-#define CHUNK_INCR	(1UL << 17)
-#define ADDR2G		(1UL << 31)
-
-static noinline __init void find_memory_chunks(unsigned long memsize)
-{
-	unsigned long addr = 0, old_addr = 0;
-	unsigned long old_cc = CHUNK_READ_WRITE;
-	unsigned long cc;
-	int chunk = 0;
-
-	while (chunk < MEMORY_CHUNKS) {
-		cc = __tprot(addr);
-		while (cc == old_cc) {
-			addr += CHUNK_INCR;
-			if (memsize && addr >= memsize)
-				break;
-#ifndef CONFIG_64BIT
-			if (addr == ADDR2G)
-				break;
-#endif
-			cc = __tprot(addr);
-		}
-
-		if (old_addr != addr &&
-		    (old_cc == CHUNK_READ_WRITE || old_cc == CHUNK_READ_ONLY)) {
-			memory_chunk[chunk].addr = old_addr;
-			memory_chunk[chunk].size = addr - old_addr;
-			memory_chunk[chunk].type = old_cc;
-			chunk++;
-		}
-
-		old_addr = addr;
-		old_cc = cc;
-
-#ifndef CONFIG_64BIT
-		if (addr == ADDR2G)
-			break;
-#endif
-		/*
-		 * Finish memory detection at the first hole
-		 * if storage size is unknown.
-		 */
-		if (cc == -1UL && !memsize)
-			break;
-		if (memsize && addr >= memsize)
-			break;
-	}
-}
-
 static __init void early_pgm_check_handler(void)
 {
 	unsigned long addr;
@@ -380,23 +324,61 @@ static __init void detect_machine_facilities(void)
 #endif
 }
 
+static __init void rescue_initrd(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+	/*
+	 * Move the initrd right behind the bss section in case it starts
+	 * within the bss section. So we don't overwrite it when the bss
+	 * section gets cleared.
+	 */
+	if (!INITRD_START || !INITRD_SIZE)
+		return;
+	if (INITRD_START >= (unsigned long) __bss_stop)
+		return;
+	memmove(__bss_stop, (void *) INITRD_START, INITRD_SIZE);
+	INITRD_START = (unsigned long) __bss_stop;
+#endif
+}
+
+/* Set up boot command line */
+static void __init setup_boot_command_line(void)
+{
+	char *parm = NULL;
+
+	/* copy arch command line */
+	strlcpy(boot_command_line, COMMAND_LINE, ARCH_COMMAND_LINE_SIZE);
+	boot_command_line[ARCH_COMMAND_LINE_SIZE - 1] = 0;
+
+	/* append IPL PARM data to the boot command line */
+	if (MACHINE_IS_VM) {
+		parm = boot_command_line + strlen(boot_command_line);
+		*parm++ = ' ';
+		get_ipl_vmparm(parm);
+		if (parm[0] == '=')
+			memmove(boot_command_line, parm + 1, strlen(parm));
+	}
+}
+
+
 /*
  * Save ipl parameters, clear bss memory, initialize storage keys
  * and create a kernel NSS at startup if the SAVESYS= parm is defined
  */
 void __init startup_init(void)
 {
-	unsigned long long memsize;
-
 	ipl_save_parameters();
+	rescue_initrd();
 	clear_bss_section();
 	init_kernel_storage_key();
 	lockdep_init();
 	lockdep_off();
-	detect_machine_type();
-	create_kernel_nss();
 	sort_main_extable();
 	setup_lowcore_early();
+	detect_machine_type();
+	ipl_update_parameters();
+	setup_boot_command_line();
+	create_kernel_nss();
 	detect_mvpg();
 	detect_ieee();
 	detect_csp();
@@ -404,18 +386,7 @@ void __init startup_init(void)
 	detect_diag44();
 	detect_machine_facilities();
 	setup_hpage();
-	sclp_read_info_early();
 	sclp_facilities_detect();
-	memsize = sclp_memory_detect();
-#ifndef CONFIG_64BIT
-	/*
-	 * Can't deal with more than 2G in 31 bit addressing mode, so
-	 * limit the value in order to avoid strange side effects.
-	 */
-	if (memsize > ADDR2G)
-		memsize = ADDR2G;
-#endif
-	if (memory_fast_detect() < 0)
-		find_memory_chunks((unsigned long) memsize);
+	detect_memory_layout(memory_chunk);
 	lockdep_on();
 }
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 532542447d66..54b2779b5e2f 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/ctype.h>
+#include <linux/fs.h>
 #include <asm/ipl.h>
 #include <asm/smp.h>
 #include <asm/setup.h>
@@ -22,6 +23,7 @@
 #include <asm/ebcdic.h>
 #include <asm/reset.h>
 #include <asm/sclp.h>
+#include <asm/setup.h>
 
 #define IPL_PARM_BLOCK_VERSION 0
 
@@ -121,6 +123,7 @@ enum ipl_method {
 	REIPL_METHOD_FCP_RO_VM,
 	REIPL_METHOD_FCP_DUMP,
 	REIPL_METHOD_NSS,
+	REIPL_METHOD_NSS_DIAG,
 	REIPL_METHOD_DEFAULT,
 };
 
@@ -134,14 +137,15 @@ enum dump_method {
 
 static int diag308_set_works = 0;
 
+static struct ipl_parameter_block ipl_block;
+
 static int reipl_capabilities = IPL_TYPE_UNKNOWN;
 
 static enum ipl_type reipl_type = IPL_TYPE_UNKNOWN;
 static enum ipl_method reipl_method = REIPL_METHOD_DEFAULT;
 static struct ipl_parameter_block *reipl_block_fcp;
 static struct ipl_parameter_block *reipl_block_ccw;
-
-static char reipl_nss_name[NSS_NAME_SIZE + 1];
+static struct ipl_parameter_block *reipl_block_nss;
 
 static int dump_capabilities = DUMP_TYPE_NONE;
 static enum dump_type dump_type = DUMP_TYPE_NONE;
@@ -263,6 +267,56 @@ static ssize_t ipl_type_show(struct kobject *kobj, struct kobj_attribute *attr,
 
 static struct kobj_attribute sys_ipl_type_attr = __ATTR_RO(ipl_type);
 
+/* VM IPL PARM routines */
+static void reipl_get_ascii_vmparm(char *dest,
+				   const struct ipl_parameter_block *ipb)
+{
+	int i;
+	int len = 0;
+	char has_lowercase = 0;
+
+	if ((ipb->ipl_info.ccw.vm_flags & DIAG308_VM_FLAGS_VP_VALID) &&
+	    (ipb->ipl_info.ccw.vm_parm_len > 0)) {
+
+		len = ipb->ipl_info.ccw.vm_parm_len;
+		memcpy(dest, ipb->ipl_info.ccw.vm_parm, len);
+		/* If at least one character is lowercase, we assume mixed
+		 * case; otherwise we convert everything to lowercase.
+		 */
+		for (i = 0; i < len; i++)
+			if ((dest[i] > 0x80 && dest[i] < 0x8a) || /* a-i */
+			    (dest[i] > 0x90 && dest[i] < 0x9a) || /* j-r */
+			    (dest[i] > 0xa1 && dest[i] < 0xaa)) { /* s-z */
+				has_lowercase = 1;
+				break;
+			}
+		if (!has_lowercase)
+			EBC_TOLOWER(dest, len);
+		EBCASC(dest, len);
+	}
+	dest[len] = 0;
+}
+
+void get_ipl_vmparm(char *dest)
+{
+	if (diag308_set_works && (ipl_block.hdr.pbt == DIAG308_IPL_TYPE_CCW))
+		reipl_get_ascii_vmparm(dest, &ipl_block);
+	else
+		dest[0] = 0;
+}
+
+static ssize_t ipl_vm_parm_show(struct kobject *kobj,
+				struct kobj_attribute *attr, char *page)
+{
+	char parm[DIAG308_VMPARM_SIZE + 1] = {};
+
+	get_ipl_vmparm(parm);
+	return sprintf(page, "%s\n", parm);
+}
+
+static struct kobj_attribute sys_ipl_vm_parm_attr =
+	__ATTR(parm, S_IRUGO, ipl_vm_parm_show, NULL);
+
 static ssize_t sys_ipl_device_show(struct kobject *kobj,
 				   struct kobj_attribute *attr, char *page)
 {
@@ -285,14 +339,8 @@ static struct kobj_attribute sys_ipl_device_attr =
 static ssize_t ipl_parameter_read(struct kobject *kobj, struct bin_attribute *attr,
 				  char *buf, loff_t off, size_t count)
 {
-	unsigned int size = IPL_PARMBLOCK_SIZE;
-
-	if (off > size)
-		return 0;
-	if (off + count > size)
-		count = size - off;
-	memcpy(buf, (void *)IPL_PARMBLOCK_START + off, count);
-	return count;
+	return memory_read_from_buffer(buf, count, &off, IPL_PARMBLOCK_START,
+					IPL_PARMBLOCK_SIZE);
 }
 
 static struct bin_attribute ipl_parameter_attr = {
@@ -310,12 +358,7 @@ static ssize_t ipl_scp_data_read(struct kobject *kobj, struct bin_attribute *att
 	unsigned int size = IPL_PARMBLOCK_START->ipl_info.fcp.scp_data_len;
 	void *scp_data = &IPL_PARMBLOCK_START->ipl_info.fcp.scp_data;
 
-	if (off > size)
-		return 0;
-	if (off + count > size)
-		count = size - off;
-	memcpy(buf, scp_data + off, count);
-	return count;
+	return memory_read_from_buffer(buf, count, &off, scp_data, size);
 }
 
 static struct bin_attribute ipl_scp_data_attr = {
@@ -370,15 +413,27 @@ static ssize_t ipl_ccw_loadparm_show(struct kobject *kobj,
 static struct kobj_attribute sys_ipl_ccw_loadparm_attr =
 	__ATTR(loadparm, 0444, ipl_ccw_loadparm_show, NULL);
 
-static struct attribute *ipl_ccw_attrs[] = {
+static struct attribute *ipl_ccw_attrs_vm[] = {
 	&sys_ipl_type_attr.attr,
 	&sys_ipl_device_attr.attr,
 	&sys_ipl_ccw_loadparm_attr.attr,
+	&sys_ipl_vm_parm_attr.attr,
 	NULL,
 };
 
-static struct attribute_group ipl_ccw_attr_group = {
-	.attrs = ipl_ccw_attrs,
+static struct attribute *ipl_ccw_attrs_lpar[] = {
+	&sys_ipl_type_attr.attr,
+	&sys_ipl_device_attr.attr,
+	&sys_ipl_ccw_loadparm_attr.attr,
+	NULL,
+};
+
+static struct attribute_group ipl_ccw_attr_group_vm = {
+	.attrs = ipl_ccw_attrs_vm,
+};
+
+static struct attribute_group ipl_ccw_attr_group_lpar = {
+	.attrs = ipl_ccw_attrs_lpar
 };
 
 /* NSS ipl device attributes */
@@ -388,6 +443,8 @@ DEFINE_IPL_ATTR_RO(ipl_nss, name, "%s\n", kernel_nss_name);
 static struct attribute *ipl_nss_attrs[] = {
 	&sys_ipl_type_attr.attr,
 	&sys_ipl_nss_name_attr.attr,
+	&sys_ipl_ccw_loadparm_attr.attr,
+	&sys_ipl_vm_parm_attr.attr,
 	NULL,
 };
 
@@ -450,7 +507,12 @@ static int __init ipl_init(void)
 	}
 	switch (ipl_info.type) {
 	case IPL_TYPE_CCW:
-		rc = sysfs_create_group(&ipl_kset->kobj, &ipl_ccw_attr_group);
+		if (MACHINE_IS_VM)
+			rc = sysfs_create_group(&ipl_kset->kobj,
+						&ipl_ccw_attr_group_vm);
+		else
+			rc = sysfs_create_group(&ipl_kset->kobj,
+						&ipl_ccw_attr_group_lpar);
 		break;
 	case IPL_TYPE_FCP:
 	case IPL_TYPE_FCP_DUMP:
@@ -481,6 +543,83 @@ static struct shutdown_action __refdata ipl_action = {
  * reipl shutdown action: Reboot Linux on shutdown.
  */
 
+/* VM IPL PARM attributes */
+static ssize_t reipl_generic_vmparm_show(struct ipl_parameter_block *ipb,
+					  char *page)
+{
+	char vmparm[DIAG308_VMPARM_SIZE + 1] = {};
+
+	reipl_get_ascii_vmparm(vmparm, ipb);
+	return sprintf(page, "%s\n", vmparm);
+}
+
+static ssize_t reipl_generic_vmparm_store(struct ipl_parameter_block *ipb,
+					  size_t vmparm_max,
+					  const char *buf, size_t len)
+{
+	int i, ip_len;
+
+	/* ignore trailing newline */
+	ip_len = len;
+	if ((len > 0) && (buf[len - 1] == '\n'))
+		ip_len--;
+
+	if (ip_len > vmparm_max)
+		return -EINVAL;
+
+	/* parm is used to store kernel options, check for common chars */
+	for (i = 0; i < ip_len; i++)
+		if (!(isalnum(buf[i]) || isascii(buf[i]) || isprint(buf[i])))
+			return -EINVAL;
+
+	memset(ipb->ipl_info.ccw.vm_parm, 0, DIAG308_VMPARM_SIZE);
+	ipb->ipl_info.ccw.vm_parm_len = ip_len;
+	if (ip_len > 0) {
+		ipb->ipl_info.ccw.vm_flags |= DIAG308_VM_FLAGS_VP_VALID;
+		memcpy(ipb->ipl_info.ccw.vm_parm, buf, ip_len);
+		ASCEBC(ipb->ipl_info.ccw.vm_parm, ip_len);
+	} else {
+		ipb->ipl_info.ccw.vm_flags &= ~DIAG308_VM_FLAGS_VP_VALID;
+	}
+
+	return len;
+}
+
+/* NSS wrapper */
+static ssize_t reipl_nss_vmparm_show(struct kobject *kobj,
+				     struct kobj_attribute *attr, char *page)
+{
+	return reipl_generic_vmparm_show(reipl_block_nss, page);
+}
+
+static ssize_t reipl_nss_vmparm_store(struct kobject *kobj,
+				      struct kobj_attribute *attr,
+				      const char *buf, size_t len)
+{
+	return reipl_generic_vmparm_store(reipl_block_nss, 56, buf, len);
+}
+
+/* CCW wrapper */
+static ssize_t reipl_ccw_vmparm_show(struct kobject *kobj,
+				     struct kobj_attribute *attr, char *page)
+{
+	return reipl_generic_vmparm_show(reipl_block_ccw, page);
+}
+
+static ssize_t reipl_ccw_vmparm_store(struct kobject *kobj,
+				      struct kobj_attribute *attr,
+				      const char *buf, size_t len)
+{
+	return reipl_generic_vmparm_store(reipl_block_ccw, 64, buf, len);
+}
+
+static struct kobj_attribute sys_reipl_nss_vmparm_attr =
+	__ATTR(parm, S_IRUGO | S_IWUSR, reipl_nss_vmparm_show,
+					reipl_nss_vmparm_store);
+static struct kobj_attribute sys_reipl_ccw_vmparm_attr =
+	__ATTR(parm, S_IRUGO | S_IWUSR, reipl_ccw_vmparm_show,
+					reipl_ccw_vmparm_store);
+
 /* FCP reipl device attributes */
 
 DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%016llx\n",
@@ -513,27 +652,26 @@ static struct attribute_group reipl_fcp_attr_group = {
 DEFINE_IPL_ATTR_RW(reipl_ccw, device, "0.0.%04llx\n", "0.0.%llx\n",
 	reipl_block_ccw->ipl_info.ccw.devno);
 
-static void reipl_get_ascii_loadparm(char *loadparm)
+static void reipl_get_ascii_loadparm(char *loadparm,
+				     struct ipl_parameter_block *ibp)
 {
-	memcpy(loadparm, &reipl_block_ccw->ipl_info.ccw.load_param,
-	       LOADPARM_LEN);
+	memcpy(loadparm, ibp->ipl_info.ccw.load_parm, LOADPARM_LEN);
 	EBCASC(loadparm, LOADPARM_LEN);
 	loadparm[LOADPARM_LEN] = 0;
 	strstrip(loadparm);
 }
 
-static ssize_t reipl_ccw_loadparm_show(struct kobject *kobj,
-				       struct kobj_attribute *attr, char *page)
+static ssize_t reipl_generic_loadparm_show(struct ipl_parameter_block *ipb,
+					   char *page)
 {
 	char buf[LOADPARM_LEN + 1];
 
-	reipl_get_ascii_loadparm(buf);
+	reipl_get_ascii_loadparm(buf, ipb);
 	return sprintf(page, "%s\n", buf);
 }
 
-static ssize_t reipl_ccw_loadparm_store(struct kobject *kobj,
-					struct kobj_attribute *attr,
-					const char *buf, size_t len)
+static ssize_t reipl_generic_loadparm_store(struct ipl_parameter_block *ipb,
+					    const char *buf, size_t len)
 {
 	int i, lp_len;
 
@@ -552,35 +690,128 @@ static ssize_t reipl_ccw_loadparm_store(struct kobject *kobj,
 		return -EINVAL;
 	}
 	/* initialize loadparm with blanks */
-	memset(&reipl_block_ccw->ipl_info.ccw.load_param, ' ', LOADPARM_LEN);
+	memset(ipb->ipl_info.ccw.load_parm, ' ', LOADPARM_LEN);
 	/* copy and convert to ebcdic */
-	memcpy(&reipl_block_ccw->ipl_info.ccw.load_param, buf, lp_len);
-	ASCEBC(reipl_block_ccw->ipl_info.ccw.load_param, LOADPARM_LEN);
+	memcpy(ipb->ipl_info.ccw.load_parm, buf, lp_len);
+	ASCEBC(ipb->ipl_info.ccw.load_parm, LOADPARM_LEN);
 	return len;
 }
 
+/* NSS wrapper */
+static ssize_t reipl_nss_loadparm_show(struct kobject *kobj,
+				       struct kobj_attribute *attr, char *page)
+{
+	return reipl_generic_loadparm_show(reipl_block_nss, page);
+}
+
+static ssize_t reipl_nss_loadparm_store(struct kobject *kobj,
+					struct kobj_attribute *attr,
+					const char *buf, size_t len)
+{
+	return reipl_generic_loadparm_store(reipl_block_nss, buf, len);
+}
+
+/* CCW wrapper */
+static ssize_t reipl_ccw_loadparm_show(struct kobject *kobj,
+				       struct kobj_attribute *attr, char *page)
+{
+	return reipl_generic_loadparm_show(reipl_block_ccw, page);
+}
+
+static ssize_t reipl_ccw_loadparm_store(struct kobject *kobj,
+					struct kobj_attribute *attr,
+					const char *buf, size_t len)
+{
+	return reipl_generic_loadparm_store(reipl_block_ccw, buf, len);
+}
+
 static struct kobj_attribute sys_reipl_ccw_loadparm_attr =
-	__ATTR(loadparm, 0644, reipl_ccw_loadparm_show,
-	       reipl_ccw_loadparm_store);
+	__ATTR(loadparm, S_IRUGO | S_IWUSR, reipl_ccw_loadparm_show,
+					    reipl_ccw_loadparm_store);
 
-static struct attribute *reipl_ccw_attrs[] = {
+static struct attribute *reipl_ccw_attrs_vm[] = {
 	&sys_reipl_ccw_device_attr.attr,
 	&sys_reipl_ccw_loadparm_attr.attr,
+	&sys_reipl_ccw_vmparm_attr.attr,
 	NULL,
 };
 
-static struct attribute_group reipl_ccw_attr_group = {
+static struct attribute *reipl_ccw_attrs_lpar[] = {
+	&sys_reipl_ccw_device_attr.attr,
+	&sys_reipl_ccw_loadparm_attr.attr,
+	NULL,
+};
+
+static struct attribute_group reipl_ccw_attr_group_vm = {
+	.name  = IPL_CCW_STR,
+	.attrs = reipl_ccw_attrs_vm,
+};
+
+static struct attribute_group reipl_ccw_attr_group_lpar = {
 	.name  = IPL_CCW_STR,
-	.attrs = reipl_ccw_attrs,
+	.attrs = reipl_ccw_attrs_lpar,
 };
 
 
 /* NSS reipl device attributes */
+static void reipl_get_ascii_nss_name(char *dst,
+				     struct ipl_parameter_block *ipb)
+{
+	memcpy(dst, ipb->ipl_info.ccw.nss_name, NSS_NAME_SIZE);
+	EBCASC(dst, NSS_NAME_SIZE);
+	dst[NSS_NAME_SIZE] = 0;
+}
+
+static ssize_t reipl_nss_name_show(struct kobject *kobj,
+				   struct kobj_attribute *attr, char *page)
+{
+	char nss_name[NSS_NAME_SIZE + 1] = {};
 
-DEFINE_IPL_ATTR_STR_RW(reipl_nss, name, "%s\n", "%s\n", reipl_nss_name);
+	reipl_get_ascii_nss_name(nss_name, reipl_block_nss);
+	return sprintf(page, "%s\n", nss_name);
+}
+
+static ssize_t reipl_nss_name_store(struct kobject *kobj,
+				    struct kobj_attribute *attr,
+				    const char *buf, size_t len)
+{
+	int nss_len;
+
+	/* ignore trailing newline */
+	nss_len = len;
+	if ((len > 0) && (buf[len - 1] == '\n'))
+		nss_len--;
+
+	if (nss_len > NSS_NAME_SIZE)
+		return -EINVAL;
+
+	memset(reipl_block_nss->ipl_info.ccw.nss_name, 0x40, NSS_NAME_SIZE);
+	if (nss_len > 0) {
+		reipl_block_nss->ipl_info.ccw.vm_flags |=
+			DIAG308_VM_FLAGS_NSS_VALID;
+		memcpy(reipl_block_nss->ipl_info.ccw.nss_name, buf, nss_len);
+		ASCEBC(reipl_block_nss->ipl_info.ccw.nss_name, nss_len);
+		EBC_TOUPPER(reipl_block_nss->ipl_info.ccw.nss_name, nss_len);
+	} else {
+		reipl_block_nss->ipl_info.ccw.vm_flags &=
+			~DIAG308_VM_FLAGS_NSS_VALID;
+	}
+
+	return len;
+}
+
+static struct kobj_attribute sys_reipl_nss_name_attr =
+	__ATTR(name, S_IRUGO | S_IWUSR, reipl_nss_name_show,
+					reipl_nss_name_store);
+
+static struct kobj_attribute sys_reipl_nss_loadparm_attr =
+	__ATTR(loadparm, S_IRUGO | S_IWUSR, reipl_nss_loadparm_show,
+					    reipl_nss_loadparm_store);
 
 static struct attribute *reipl_nss_attrs[] = {
 	&sys_reipl_nss_name_attr.attr,
+	&sys_reipl_nss_loadparm_attr.attr,
+	&sys_reipl_nss_vmparm_attr.attr,
 	NULL,
 };
 
@@ -617,7 +848,10 @@ static int reipl_set_type(enum ipl_type type)
 		reipl_method = REIPL_METHOD_FCP_DUMP;
 		break;
 	case IPL_TYPE_NSS:
-		reipl_method = REIPL_METHOD_NSS;
+		if (diag308_set_works)
+			reipl_method = REIPL_METHOD_NSS_DIAG;
+		else
+			reipl_method = REIPL_METHOD_NSS;
 		break;
 	case IPL_TYPE_UNKNOWN:
 		reipl_method = REIPL_METHOD_DEFAULT;
@@ -655,11 +889,38 @@ static struct kobj_attribute reipl_type_attr =
 
 static struct kset *reipl_kset;
 
+static void get_ipl_string(char *dst, struct ipl_parameter_block *ipb,
+			   const enum ipl_method m)
+{
+	char loadparm[LOADPARM_LEN + 1] = {};
+	char vmparm[DIAG308_VMPARM_SIZE + 1] = {};
+	char nss_name[NSS_NAME_SIZE + 1] = {};
+	size_t pos = 0;
+
+	reipl_get_ascii_loadparm(loadparm, ipb);
+	reipl_get_ascii_nss_name(nss_name, ipb);
+	reipl_get_ascii_vmparm(vmparm, ipb);
+
+	switch (m) {
+	case REIPL_METHOD_CCW_VM:
+		pos = sprintf(dst, "IPL %X CLEAR", ipb->ipl_info.ccw.devno);
+		break;
+	case REIPL_METHOD_NSS:
+		pos = sprintf(dst, "IPL %s", nss_name);
+		break;
+	default:
+		break;
+	}
+	if (strlen(loadparm) > 0)
+		pos += sprintf(dst + pos, " LOADPARM '%s'", loadparm);
+	if (strlen(vmparm) > 0)
+		sprintf(dst + pos, " PARM %s", vmparm);
+}
+
 static void reipl_run(struct shutdown_trigger *trigger)
 {
 	struct ccw_dev_id devid;
-	static char buf[100];
-	char loadparm[LOADPARM_LEN + 1];
+	static char buf[128];
 
 	switch (reipl_method) {
 	case REIPL_METHOD_CCW_CIO:
@@ -668,13 +929,7 @@ static void reipl_run(struct shutdown_trigger *trigger)
 		reipl_ccw_dev(&devid);
 		break;
 	case REIPL_METHOD_CCW_VM:
-		reipl_get_ascii_loadparm(loadparm);
-		if (strlen(loadparm) == 0)
-			sprintf(buf, "IPL %X CLEAR",
-				reipl_block_ccw->ipl_info.ccw.devno);
-		else
-			sprintf(buf, "IPL %X CLEAR LOADPARM '%s'",
-				reipl_block_ccw->ipl_info.ccw.devno, loadparm);
+		get_ipl_string(buf, reipl_block_ccw, REIPL_METHOD_CCW_VM);
 		__cpcmd(buf, NULL, 0, NULL);
 		break;
 	case REIPL_METHOD_CCW_DIAG:
@@ -691,8 +946,12 @@ static void reipl_run(struct shutdown_trigger *trigger)
 	case REIPL_METHOD_FCP_RO_VM:
 		__cpcmd("IPL", NULL, 0, NULL);
 		break;
+	case REIPL_METHOD_NSS_DIAG:
+		diag308(DIAG308_SET, reipl_block_nss);
+		diag308(DIAG308_IPL, NULL);
+		break;
 	case REIPL_METHOD_NSS:
-		sprintf(buf, "IPL %s", reipl_nss_name);
+		get_ipl_string(buf, reipl_block_nss, REIPL_METHOD_NSS);
 		__cpcmd(buf, NULL, 0, NULL);
 		break;
 	case REIPL_METHOD_DEFAULT:
@@ -707,16 +966,36 @@ static void reipl_run(struct shutdown_trigger *trigger)
 	disabled_wait((unsigned long) __builtin_return_address(0));
 }
 
-static void __init reipl_probe(void)
+static void reipl_block_ccw_init(struct ipl_parameter_block *ipb)
 {
-	void *buffer;
+	ipb->hdr.len = IPL_PARM_BLK_CCW_LEN;
+	ipb->hdr.version = IPL_PARM_BLOCK_VERSION;
+	ipb->hdr.blk0_len = IPL_PARM_BLK0_CCW_LEN;
+	ipb->hdr.pbt = DIAG308_IPL_TYPE_CCW;
+}
 
-	buffer = (void *) get_zeroed_page(GFP_KERNEL);
-	if (!buffer)
-		return;
-	if (diag308(DIAG308_STORE, buffer) == DIAG308_RC_OK)
-		diag308_set_works = 1;
-	free_page((unsigned long)buffer);
+static void reipl_block_ccw_fill_parms(struct ipl_parameter_block *ipb)
+{
+	/* LOADPARM */
+	/* check if read scp info worked and set loadparm */
+	if (sclp_ipl_info.is_valid)
+		memcpy(ipb->ipl_info.ccw.load_parm,
+				&sclp_ipl_info.loadparm, LOADPARM_LEN);
+	else
+		/* read scp info failed: set empty loadparm (EBCDIC blanks) */
+		memset(ipb->ipl_info.ccw.load_parm, 0x40, LOADPARM_LEN);
+	ipb->hdr.flags = DIAG308_FLAGS_LP_VALID;
+
+	/* VM PARM */
+	if (MACHINE_IS_VM && diag308_set_works &&
+	    (ipl_block.ipl_info.ccw.vm_flags & DIAG308_VM_FLAGS_VP_VALID)) {
+
+		ipb->ipl_info.ccw.vm_flags |= DIAG308_VM_FLAGS_VP_VALID;
+		ipb->ipl_info.ccw.vm_parm_len =
+					ipl_block.ipl_info.ccw.vm_parm_len;
+		memcpy(ipb->ipl_info.ccw.vm_parm,
+		       ipl_block.ipl_info.ccw.vm_parm, DIAG308_VMPARM_SIZE);
+	}
 }
 
 static int __init reipl_nss_init(void)
@@ -725,10 +1004,31 @@ static int __init reipl_nss_init(void)
 
 	if (!MACHINE_IS_VM)
 		return 0;
+
+	reipl_block_nss = (void *) get_zeroed_page(GFP_KERNEL);
+	if (!reipl_block_nss)
+		return -ENOMEM;
+
+	if (!diag308_set_works)
+		sys_reipl_nss_vmparm_attr.attr.mode = S_IRUGO;
+
 	rc = sysfs_create_group(&reipl_kset->kobj, &reipl_nss_attr_group);
 	if (rc)
 		return rc;
-	strncpy(reipl_nss_name, kernel_nss_name, NSS_NAME_SIZE + 1);
+
+	reipl_block_ccw_init(reipl_block_nss);
+	if (ipl_info.type == IPL_TYPE_NSS) {
+		memset(reipl_block_nss->ipl_info.ccw.nss_name,
+			' ', NSS_NAME_SIZE);
+		memcpy(reipl_block_nss->ipl_info.ccw.nss_name,
+			kernel_nss_name, strlen(kernel_nss_name));
+		ASCEBC(reipl_block_nss->ipl_info.ccw.nss_name, NSS_NAME_SIZE);
+		reipl_block_nss->ipl_info.ccw.vm_flags |=
+			DIAG308_VM_FLAGS_NSS_VALID;
+
+		reipl_block_ccw_fill_parms(reipl_block_nss);
+	}
+
 	reipl_capabilities |= IPL_TYPE_NSS;
 	return 0;
 }
@@ -740,28 +1040,27 @@ static int __init reipl_ccw_init(void)
 	reipl_block_ccw = (void *) get_zeroed_page(GFP_KERNEL);
 	if (!reipl_block_ccw)
 		return -ENOMEM;
-	rc = sysfs_create_group(&reipl_kset->kobj, &reipl_ccw_attr_group);
-	if (rc) {
-		free_page((unsigned long)reipl_block_ccw);
-		return rc;
+
+	if (MACHINE_IS_VM) {
+		if (!diag308_set_works)
+			sys_reipl_ccw_vmparm_attr.attr.mode = S_IRUGO;
+		rc = sysfs_create_group(&reipl_kset->kobj,
+					&reipl_ccw_attr_group_vm);
+	} else {
+		if(!diag308_set_works)
+			sys_reipl_ccw_loadparm_attr.attr.mode = S_IRUGO;
+		rc = sysfs_create_group(&reipl_kset->kobj,
+					&reipl_ccw_attr_group_lpar);
 	}
-	reipl_block_ccw->hdr.len = IPL_PARM_BLK_CCW_LEN;
-	reipl_block_ccw->hdr.version = IPL_PARM_BLOCK_VERSION;
-	reipl_block_ccw->hdr.blk0_len = IPL_PARM_BLK0_CCW_LEN;
-	reipl_block_ccw->hdr.pbt = DIAG308_IPL_TYPE_CCW;
-	reipl_block_ccw->hdr.flags = DIAG308_FLAGS_LP_VALID;
-	/* check if read scp info worked and set loadparm */
-	if (sclp_ipl_info.is_valid)
-		memcpy(reipl_block_ccw->ipl_info.ccw.load_param,
-		       &sclp_ipl_info.loadparm, LOADPARM_LEN);
-	else
-		/* read scp info failed: set empty loadparm (EBCDIC blanks) */
-		memset(reipl_block_ccw->ipl_info.ccw.load_param, 0x40,
-		       LOADPARM_LEN);
-	if (!MACHINE_IS_VM && !diag308_set_works)
-		sys_reipl_ccw_loadparm_attr.attr.mode = S_IRUGO;
-	if (ipl_info.type == IPL_TYPE_CCW)
+	if (rc)
+		return rc;
+
+	reipl_block_ccw_init(reipl_block_ccw);
+	if (ipl_info.type == IPL_TYPE_CCW) {
 		reipl_block_ccw->ipl_info.ccw.devno = ipl_devno;
+		reipl_block_ccw_fill_parms(reipl_block_ccw);
+	}
+
 	reipl_capabilities |= IPL_TYPE_CCW;
 	return 0;
 }
@@ -1298,7 +1597,6 @@ static void __init shutdown_actions_init(void)
 
 static int __init s390_ipl_init(void)
 {
-	reipl_probe();
 	sclp_get_ipl_info(&sclp_ipl_info);
 	shutdown_actions_init();
 	shutdown_triggers_init();
@@ -1405,6 +1703,12 @@ void __init setup_ipl(void)
 	atomic_notifier_chain_register(&panic_notifier_list, &on_panic_nb);
 }
 
+void __init ipl_update_parameters(void)
+{
+	if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK)
+		diag308_set_works = 1;
+}
+
 void __init ipl_save_parameters(void)
 {
 	struct cio_iplinfo iplinfo;
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index ed04d1372d5d..4f82e5b5f879 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -41,10 +41,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	if (is_prohibited_opcode((kprobe_opcode_t *) p->addr))
 		return -EINVAL;
 
-	if ((unsigned long)p->addr & 0x01) {
-		printk("Attempt to register kprobe at an unaligned address\n");
+	if ((unsigned long)p->addr & 0x01)
 		return -EINVAL;
-		}
 
 	/* Use the get_insn_slot() facility for correctness */
 	if (!(p->ainsn.insn = get_insn_slot()))
@@ -272,7 +270,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 					struct pt_regs *regs)
 {
@@ -379,8 +376,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -419,7 +415,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index 3c77dd36994c..131d7ee8b416 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -52,7 +52,6 @@ void machine_kexec_cleanup(struct kimage *image)
 
 void machine_shutdown(void)
 {
-	printk(KERN_INFO "kexec: machine_shutdown called\n");
 }
 
 void machine_kexec(struct kimage *image)
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
new file mode 100644
index 000000000000..18ed7abe16c5
--- /dev/null
+++ b/arch/s390/kernel/mem_detect.c
@@ -0,0 +1,100 @@
+/*
+ *    Copyright IBM Corp. 2008
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/ipl.h>
+#include <asm/sclp.h>
+#include <asm/setup.h>
+
+static int memory_fast_detect(struct mem_chunk *chunk)
+{
+	unsigned long val0 = 0;
+	unsigned long val1 = 0xc;
+	int rc = -EOPNOTSUPP;
+
+	if (ipl_flags & IPL_NSS_VALID)
+		return -EOPNOTSUPP;
+	asm volatile(
+		"	diag	%1,%2,0x260\n"
+		"0:	lhi	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc), "+d" (val0), "+d" (val1) : : "cc");
+
+	if (rc || val0 != val1)
+		return -EOPNOTSUPP;
+	chunk->size = val0 + 1;
+	return 0;
+}
+
+static inline int tprot(unsigned long addr)
+{
+	int rc = -EFAULT;
+
+	asm volatile(
+		"	tprot	0(%1),0\n"
+		"0:	ipm	%0\n"
+		"	srl	%0,28\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "a" (addr) : "cc");
+	return rc;
+}
+
+#define ADDR2G (1ULL << 31)
+
+static void find_memory_chunks(struct mem_chunk chunk[])
+{
+	unsigned long long memsize, rnmax, rzm;
+	unsigned long addr = 0, size;
+	int i = 0, type;
+
+	rzm = sclp_get_rzm();
+	rnmax = sclp_get_rnmax();
+	memsize = rzm * rnmax;
+	if (!rzm)
+		rzm = 1ULL << 17;
+	if (sizeof(long) == 4) {
+		rzm = min(ADDR2G, rzm);
+		memsize = memsize ? min(ADDR2G, memsize) : ADDR2G;
+	}
+	do {
+		size = 0;
+		type = tprot(addr);
+		do {
+			size += rzm;
+			if (memsize && addr + size >= memsize)
+				break;
+		} while (type == tprot(addr + size));
+		if (type == CHUNK_READ_WRITE || type == CHUNK_READ_ONLY) {
+			chunk[i].addr = addr;
+			chunk[i].size = size;
+			chunk[i].type = type;
+			i++;
+		}
+		addr += size;
+	} while (addr < memsize && i < MEMORY_CHUNKS);
+}
+
+void detect_memory_layout(struct mem_chunk chunk[])
+{
+	unsigned long flags, cr0;
+
+	memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk));
+	if (memory_fast_detect(&chunk[0]) == 0)
+		return;
+	/* Disable IRQs, DAT and low address protection so tprot does the
+	 * right thing and we don't get scheduled away with low address
+	 * protection disabled.
+	 */
+	flags = __raw_local_irq_stnsm(0xf8);
+	__ctl_store(cr0, 0, 0);
+	__ctl_clear_bit(0, 28);
+	find_memory_chunks(chunk);
+	__ctl_load(cr0, 0, 0);
+	__raw_local_irq_ssm(flags);
+}
+EXPORT_SYMBOL(detect_memory_layout);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 7920861109d2..9839767d0842 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -75,46 +75,19 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return sf->gprs[8];
 }
 
-/*
- * Need to know about CPUs going idle?
- */
-static ATOMIC_NOTIFIER_HEAD(idle_chain);
 DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
 
-int register_idle_notifier(struct notifier_block *nb)
-{
-	return atomic_notifier_chain_register(&idle_chain, nb);
-}
-EXPORT_SYMBOL(register_idle_notifier);
-
-int unregister_idle_notifier(struct notifier_block *nb)
-{
-	return atomic_notifier_chain_unregister(&idle_chain, nb);
-}
-EXPORT_SYMBOL(unregister_idle_notifier);
-
 static int s390_idle_enter(void)
 {
 	struct s390_idle_data *idle;
-	int nr_calls = 0;
-	void *hcpu;
-	int rc;
 
-	hcpu = (void *)(long)smp_processor_id();
-	rc = __atomic_notifier_call_chain(&idle_chain, S390_CPU_IDLE, hcpu, -1,
-					  &nr_calls);
-	if (rc == NOTIFY_BAD) {
-		nr_calls--;
-		__atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
-					     hcpu, nr_calls, NULL);
-		return rc;
-	}
 	idle = &__get_cpu_var(s390_idle);
 	spin_lock(&idle->lock);
 	idle->idle_count++;
 	idle->in_idle = 1;
 	idle->idle_enter = get_clock();
 	spin_unlock(&idle->lock);
+	vtime_stop_cpu_timer();
 	return NOTIFY_OK;
 }
 
@@ -122,13 +95,12 @@ void s390_idle_leave(void)
 {
 	struct s390_idle_data *idle;
 
+	vtime_start_cpu_timer();
 	idle = &__get_cpu_var(s390_idle);
 	spin_lock(&idle->lock);
 	idle->idle_time += get_clock() - idle->idle_enter;
 	idle->in_idle = 0;
 	spin_unlock(&idle->lock);
-	atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
-				   (void *)(long) smp_processor_id());
 }
 
 extern void s390_handle_mcck(void);
@@ -170,7 +142,7 @@ static void default_idle(void)
 void cpu_idle(void)
 {
 	for (;;) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			default_idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 35827b9bd4d1..2815bfe348a6 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -33,6 +33,8 @@
 #include <linux/security.h>
 #include <linux/audit.h>
 #include <linux/signal.h>
+#include <linux/elf.h>
+#include <linux/regset.h>
 
 #include <asm/segment.h>
 #include <asm/page.h>
@@ -47,6 +49,11 @@
 #include "compat_ptrace.h"
 #endif
 
+enum s390_regset {
+	REGSET_GENERAL,
+	REGSET_FP,
+};
+
 static void
 FixPerRegisters(struct task_struct *task)
 {
@@ -126,24 +133,10 @@ ptrace_disable(struct task_struct *child)
  * struct user contain pad bytes that should be read as zeroes.
  * Lovely...
  */
-static int
-peek_user(struct task_struct *child, addr_t addr, addr_t data)
+static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 {
 	struct user *dummy = NULL;
-	addr_t offset, tmp, mask;
-
-	/*
-	 * Stupid gdb peeks/pokes the access registers in 64 bit with
-	 * an alignment of 4. Programmers from hell...
-	 */
-	mask = __ADDR_MASK;
-#ifdef CONFIG_64BIT
-	if (addr >= (addr_t) &dummy->regs.acrs &&
-	    addr < (addr_t) &dummy->regs.orig_gpr2)
-		mask = 3;
-#endif
-	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
-		return -EIO;
+	addr_t offset, tmp;
 
 	if (addr < (addr_t) &dummy->regs.acrs) {
 		/*
@@ -197,24 +190,18 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data)
 	} else
 		tmp = 0;
 
-	return put_user(tmp, (addr_t __user *) data);
+	return tmp;
 }
 
-/*
- * Write a word to the user area of a process at location addr. This
- * operation does have an additional problem compared to peek_user.
- * Stores to the program status word and on the floating point
- * control register needs to get checked for validity.
- */
 static int
-poke_user(struct task_struct *child, addr_t addr, addr_t data)
+peek_user(struct task_struct *child, addr_t addr, addr_t data)
 {
 	struct user *dummy = NULL;
-	addr_t offset, mask;
+	addr_t tmp, mask;
 
 	/*
 	 * Stupid gdb peeks/pokes the access registers in 64 bit with
-	 * an alignment of 4. Programmers from hell indeed...
+	 * an alignment of 4. Programmers from hell...
 	 */
 	mask = __ADDR_MASK;
 #ifdef CONFIG_64BIT
@@ -225,6 +212,21 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data)
 	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
 		return -EIO;
 
+	tmp = __peek_user(child, addr);
+	return put_user(tmp, (addr_t __user *) data);
+}
+
+/*
+ * Write a word to the user area of a process at location addr. This
+ * operation does have an additional problem compared to peek_user.
+ * Stores to the program status word and on the floating point
+ * control register needs to get checked for validity.
+ */
+static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
+{
+	struct user *dummy = NULL;
+	addr_t offset;
+
 	if (addr < (addr_t) &dummy->regs.acrs) {
 		/*
 		 * psw and gprs are stored on the stack
@@ -292,6 +294,28 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data)
 	return 0;
 }
 
+static int
+poke_user(struct task_struct *child, addr_t addr, addr_t data)
+{
+	struct user *dummy = NULL;
+	addr_t mask;
+
+	/*
+	 * Stupid gdb peeks/pokes the access registers in 64 bit with
+	 * an alignment of 4. Programmers from hell indeed...
+	 */
+	mask = __ADDR_MASK;
+#ifdef CONFIG_64BIT
+	if (addr >= (addr_t) &dummy->regs.acrs &&
+	    addr < (addr_t) &dummy->regs.orig_gpr2)
+		mask = 3;
+#endif
+	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
+		return -EIO;
+
+	return __poke_user(child, addr, data);
+}
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	ptrace_area parea; 
@@ -367,18 +391,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 /*
  * Same as peek_user but for a 31 bit program.
  */
-static int
-peek_user_emu31(struct task_struct *child, addr_t addr, addr_t data)
+static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 {
 	struct user32 *dummy32 = NULL;
 	per_struct32 *dummy_per32 = NULL;
 	addr_t offset;
 	__u32 tmp;
 
-	if (!test_thread_flag(TIF_31BIT) ||
-	    (addr & 3) || addr > sizeof(struct user) - 3)
-		return -EIO;
-
 	if (addr < (addr_t) &dummy32->regs.acrs) {
 		/*
 		 * psw and gprs are stored on the stack
@@ -435,25 +454,32 @@ peek_user_emu31(struct task_struct *child, addr_t addr, addr_t data)
 	} else
 		tmp = 0;
 
+	return tmp;
+}
+
+static int peek_user_compat(struct task_struct *child,
+			    addr_t addr, addr_t data)
+{
+	__u32 tmp;
+
+	if (!test_thread_flag(TIF_31BIT) ||
+	    (addr & 3) || addr > sizeof(struct user) - 3)
+		return -EIO;
+
+	tmp = __peek_user_compat(child, addr);
 	return put_user(tmp, (__u32 __user *) data);
 }
 
 /*
  * Same as poke_user but for a 31 bit program.
  */
-static int
-poke_user_emu31(struct task_struct *child, addr_t addr, addr_t data)
+static int __poke_user_compat(struct task_struct *child,
+			      addr_t addr, addr_t data)
 {
 	struct user32 *dummy32 = NULL;
 	per_struct32 *dummy_per32 = NULL;
+	__u32 tmp = (__u32) data;
 	addr_t offset;
-	__u32 tmp;
-
-	if (!test_thread_flag(TIF_31BIT) ||
-	    (addr & 3) || addr > sizeof(struct user32) - 3)
-		return -EIO;
-
-	tmp = (__u32) data;
 
 	if (addr < (addr_t) &dummy32->regs.acrs) {
 		/*
@@ -528,6 +554,16 @@ poke_user_emu31(struct task_struct *child, addr_t addr, addr_t data)
 	return 0;
 }
 
+static int poke_user_compat(struct task_struct *child,
+			    addr_t addr, addr_t data)
+{
+	if (!test_thread_flag(TIF_31BIT) ||
+	    (addr & 3) || addr > sizeof(struct user32) - 3)
+		return -EIO;
+
+	return __poke_user_compat(child, addr, data);
+}
+
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
 {
@@ -539,11 +575,11 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 	switch (request) {
 	case PTRACE_PEEKUSR:
 		/* read the word at location addr in the USER area. */
-		return peek_user_emu31(child, addr, data);
+		return peek_user_compat(child, addr, data);
 
 	case PTRACE_POKEUSR:
 		/* write the word at location addr in the USER area */
-		return poke_user_emu31(child, addr, data);
+		return poke_user_compat(child, addr, data);
 
 	case PTRACE_PEEKUSR_AREA:
 	case PTRACE_POKEUSR_AREA:
@@ -555,13 +591,13 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		copied = 0;
 		while (copied < parea.len) {
 			if (request == PTRACE_PEEKUSR_AREA)
-				ret = peek_user_emu31(child, addr, data);
+				ret = peek_user_compat(child, addr, data);
 			else {
 				__u32 utmp;
 				if (get_user(utmp,
 					     (__u32 __force __user *) data))
 					return -EFAULT;
-				ret = poke_user_emu31(child, addr, utmp);
+				ret = poke_user_compat(child, addr, utmp);
 			}
 			if (ret)
 				return ret;
@@ -610,3 +646,240 @@ syscall_trace(struct pt_regs *regs, int entryexit)
 				    regs->gprs[2], regs->orig_gpr2, regs->gprs[3],
 				    regs->gprs[4], regs->gprs[5]);
 }
+
+/*
+ * user_regset definitions.
+ */
+
+static int s390_regs_get(struct task_struct *target,
+			 const struct user_regset *regset,
+			 unsigned int pos, unsigned int count,
+			 void *kbuf, void __user *ubuf)
+{
+	if (target == current)
+		save_access_regs(target->thread.acrs);
+
+	if (kbuf) {
+		unsigned long *k = kbuf;
+		while (count > 0) {
+			*k++ = __peek_user(target, pos);
+			count -= sizeof(*k);
+			pos += sizeof(*k);
+		}
+	} else {
+		unsigned long __user *u = ubuf;
+		while (count > 0) {
+			if (__put_user(__peek_user(target, pos), u++))
+				return -EFAULT;
+			count -= sizeof(*u);
+			pos += sizeof(*u);
+		}
+	}
+	return 0;
+}
+
+static int s390_regs_set(struct task_struct *target,
+			 const struct user_regset *regset,
+			 unsigned int pos, unsigned int count,
+			 const void *kbuf, const void __user *ubuf)
+{
+	int rc = 0;
+
+	if (target == current)
+		save_access_regs(target->thread.acrs);
+
+	if (kbuf) {
+		const unsigned long *k = kbuf;
+		while (count > 0 && !rc) {
+			rc = __poke_user(target, pos, *k++);
+			count -= sizeof(*k);
+			pos += sizeof(*k);
+		}
+	} else {
+		const unsigned long  __user *u = ubuf;
+		while (count > 0 && !rc) {
+			unsigned long word;
+			rc = __get_user(word, u++);
+			if (rc)
+				break;
+			rc = __poke_user(target, pos, word);
+			count -= sizeof(*u);
+			pos += sizeof(*u);
+		}
+	}
+
+	if (rc == 0 && target == current)
+		restore_access_regs(target->thread.acrs);
+
+	return rc;
+}
+
+static int s390_fpregs_get(struct task_struct *target,
+			   const struct user_regset *regset, unsigned int pos,
+			   unsigned int count, void *kbuf, void __user *ubuf)
+{
+	if (target == current)
+		save_fp_regs(&target->thread.fp_regs);
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.fp_regs, 0, -1);
+}
+
+static int s390_fpregs_set(struct task_struct *target,
+			   const struct user_regset *regset, unsigned int pos,
+			   unsigned int count, const void *kbuf,
+			   const void __user *ubuf)
+{
+	int rc = 0;
+
+	if (target == current)
+		save_fp_regs(&target->thread.fp_regs);
+
+	/* If setting FPC, must validate it first. */
+	if (count > 0 && pos < offsetof(s390_fp_regs, fprs)) {
+		u32 fpc[2] = { target->thread.fp_regs.fpc, 0 };
+		rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fpc,
+					0, offsetof(s390_fp_regs, fprs));
+		if (rc)
+			return rc;
+		if ((fpc[0] & ~FPC_VALID_MASK) != 0 || fpc[1] != 0)
+			return -EINVAL;
+		target->thread.fp_regs.fpc = fpc[0];
+	}
+
+	if (rc == 0 && count > 0)
+		rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					target->thread.fp_regs.fprs,
+					offsetof(s390_fp_regs, fprs), -1);
+
+	if (rc == 0 && target == current)
+		restore_fp_regs(&target->thread.fp_regs);
+
+	return rc;
+}
+
+static const struct user_regset s390_regsets[] = {
+	[REGSET_GENERAL] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = sizeof(s390_regs) / sizeof(long),
+		.size = sizeof(long),
+		.align = sizeof(long),
+		.get = s390_regs_get,
+		.set = s390_regs_set,
+	},
+	[REGSET_FP] = {
+		.core_note_type = NT_PRFPREG,
+		.n = sizeof(s390_fp_regs) / sizeof(long),
+		.size = sizeof(long),
+		.align = sizeof(long),
+		.get = s390_fpregs_get,
+		.set = s390_fpregs_set,
+	},
+};
+
+static const struct user_regset_view user_s390_view = {
+	.name = UTS_MACHINE,
+	.e_machine = EM_S390,
+	.regsets = s390_regsets,
+	.n = ARRAY_SIZE(s390_regsets)
+};
+
+#ifdef CONFIG_COMPAT
+static int s390_compat_regs_get(struct task_struct *target,
+				const struct user_regset *regset,
+				unsigned int pos, unsigned int count,
+				void *kbuf, void __user *ubuf)
+{
+	if (target == current)
+		save_access_regs(target->thread.acrs);
+
+	if (kbuf) {
+		compat_ulong_t *k = kbuf;
+		while (count > 0) {
+			*k++ = __peek_user_compat(target, pos);
+			count -= sizeof(*k);
+			pos += sizeof(*k);
+		}
+	} else {
+		compat_ulong_t __user *u = ubuf;
+		while (count > 0) {
+			if (__put_user(__peek_user_compat(target, pos), u++))
+				return -EFAULT;
+			count -= sizeof(*u);
+			pos += sizeof(*u);
+		}
+	}
+	return 0;
+}
+
+static int s390_compat_regs_set(struct task_struct *target,
+				const struct user_regset *regset,
+				unsigned int pos, unsigned int count,
+				const void *kbuf, const void __user *ubuf)
+{
+	int rc = 0;
+
+	if (target == current)
+		save_access_regs(target->thread.acrs);
+
+	if (kbuf) {
+		const compat_ulong_t *k = kbuf;
+		while (count > 0 && !rc) {
+			rc = __poke_user_compat(target, pos, *k++);
+			count -= sizeof(*k);
+			pos += sizeof(*k);
+		}
+	} else {
+		const compat_ulong_t  __user *u = ubuf;
+		while (count > 0 && !rc) {
+			compat_ulong_t word;
+			rc = __get_user(word, u++);
+			if (rc)
+				break;
+			rc = __poke_user_compat(target, pos, word);
+			count -= sizeof(*u);
+			pos += sizeof(*u);
+		}
+	}
+
+	if (rc == 0 && target == current)
+		restore_access_regs(target->thread.acrs);
+
+	return rc;
+}
+
+static const struct user_regset s390_compat_regsets[] = {
+	[REGSET_GENERAL] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = sizeof(s390_compat_regs) / sizeof(compat_long_t),
+		.size = sizeof(compat_long_t),
+		.align = sizeof(compat_long_t),
+		.get = s390_compat_regs_get,
+		.set = s390_compat_regs_set,
+	},
+	[REGSET_FP] = {
+		.core_note_type = NT_PRFPREG,
+		.n = sizeof(s390_fp_regs) / sizeof(compat_long_t),
+		.size = sizeof(compat_long_t),
+		.align = sizeof(compat_long_t),
+		.get = s390_fpregs_get,
+		.set = s390_fpregs_set,
+	},
+};
+
+static const struct user_regset_view user_s390_compat_view = {
+	.name = "s390",
+	.e_machine = EM_S390,
+	.regsets = s390_compat_regsets,
+	.n = ARRAY_SIZE(s390_compat_regsets)
+};
+#endif
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+#ifdef CONFIG_COMPAT
+	if (test_tsk_thread_flag(task, TIF_31BIT))
+		return &user_s390_compat_view;
+#endif
+	return &user_s390_view;
+}
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 2bc70b6e876a..62122bad1e33 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -54,6 +54,7 @@
 #include <asm/sections.h>
 #include <asm/ebcdic.h>
 #include <asm/compat.h>
+#include <asm/kvm_virtio.h>
 
 long psw_kernel_bits	= (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
 			   PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
@@ -77,7 +78,7 @@ unsigned long machine_flags;
 unsigned long elf_hwcap = 0;
 char elf_platform[ELF_PLATFORM_SIZE];
 
-struct mem_chunk __meminitdata memory_chunk[MEMORY_CHUNKS];
+struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
 volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
 static unsigned long __initdata memory_end;
 
@@ -205,12 +206,6 @@ static void __init conmode_default(void)
 			SET_CONSOLE_SCLP;
 #endif
 		}
-        } else if (MACHINE_IS_P390) {
-#if defined(CONFIG_TN3215_CONSOLE)
-		SET_CONSOLE_3215;
-#elif defined(CONFIG_TN3270_CONSOLE)
-		SET_CONSOLE_3270;
-#endif
 	} else {
 #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
 		SET_CONSOLE_SCLP;
@@ -221,18 +216,17 @@ static void __init conmode_default(void)
 #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
 static void __init setup_zfcpdump(unsigned int console_devno)
 {
-	static char str[64];
+	static char str[41];
 
 	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
 		return;
 	if (console_devno != -1)
-		sprintf(str, "cio_ignore=all,!0.0.%04x,!0.0.%04x",
+		sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x",
 			ipl_info.data.fcp.dev_id.devno, console_devno);
 	else
-		sprintf(str, "cio_ignore=all,!0.0.%04x",
+		sprintf(str, " cio_ignore=all,!0.0.%04x",
 			ipl_info.data.fcp.dev_id.devno);
-	strcat(COMMAND_LINE, " ");
-	strcat(COMMAND_LINE, str);
+	strcat(boot_command_line, str);
 	console_loglevel = 2;
 }
 #else
@@ -289,32 +283,6 @@ static int __init early_parse_mem(char *p)
 }
 early_param("mem", early_parse_mem);
 
-/*
- * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes
- */
-static int __init early_parse_ipldelay(char *p)
-{
-	unsigned long delay = 0;
-
-	delay = simple_strtoul(p, &p, 0);
-
-	switch (*p) {
-	case 's':
-	case 'S':
-		delay *= 1000000;
-		break;
-	case 'm':
-	case 'M':
-		delay *= 60 * 1000000;
-	}
-
-	/* now wait for the requested amount of time */
-	udelay(delay);
-
-	return 0;
-}
-early_param("ipldelay", early_parse_ipldelay);
-
 #ifdef CONFIG_S390_SWITCH_AMODE
 #ifdef CONFIG_PGSTE
 unsigned int switch_amode = 1;
@@ -799,16 +767,15 @@ setup_arch(char **cmdline_p)
 		printk("We are running under VM (64 bit mode)\n");
 	else if (MACHINE_IS_KVM) {
 		printk("We are running under KVM (64 bit mode)\n");
-		add_preferred_console("ttyS", 1, NULL);
+		add_preferred_console("hvc", 0, NULL);
+		s390_virtio_console_init();
 	} else
 		printk("We are running native (64 bit mode)\n");
 #endif /* CONFIG_64BIT */
 
-	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
-
-	*cmdline_p = COMMAND_LINE;
-	*(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0';
+	/* Have one command line that is parsed and saved in /proc/cmdline */
+	/* boot_command_line has been already set up in early.c */
+	*cmdline_p = boot_command_line;
 
         ROOT_DEV = Root_RAM0;
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 5d4fa4b1c74c..b795b3e24afd 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -109,7 +109,7 @@ static void do_call_function(void)
 }
 
 static void __smp_call_function_map(void (*func) (void *info), void *info,
-				    int nonatomic, int wait, cpumask_t map)
+				    int wait, cpumask_t map)
 {
 	struct call_data_struct data;
 	int cpu, local = 0;
@@ -162,7 +162,6 @@ out:
  * smp_call_function:
  * @func: the function to run; this must be fast and non-blocking
  * @info: an arbitrary pointer to pass to the function
- * @nonatomic: unused
  * @wait: if true, wait (atomically) until function has completed on other CPUs
  *
  * Run a function on all other CPUs.
@@ -170,15 +169,14 @@ out:
  * You must not call this function with disabled interrupts, from a
  * hardware interrupt handler or from a bottom half.
  */
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-		      int wait)
+int smp_call_function(void (*func) (void *info), void *info, int wait)
 {
 	cpumask_t map;
 
 	spin_lock(&call_lock);
 	map = cpu_online_map;
 	cpu_clear(smp_processor_id(), map);
-	__smp_call_function_map(func, info, nonatomic, wait, map);
+	__smp_call_function_map(func, info, wait, map);
 	spin_unlock(&call_lock);
 	return 0;
 }
@@ -189,7 +187,6 @@ EXPORT_SYMBOL(smp_call_function);
  * @cpu: the CPU where func should run
  * @func: the function to run; this must be fast and non-blocking
  * @info: an arbitrary pointer to pass to the function
- * @nonatomic: unused
  * @wait: if true, wait (atomically) until function has completed on other CPUs
  *
  * Run a function on one processor.
@@ -198,11 +195,10 @@ EXPORT_SYMBOL(smp_call_function);
  * hardware interrupt handler or from a bottom half.
  */
 int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-			     int nonatomic, int wait)
+			     int wait)
 {
 	spin_lock(&call_lock);
-	__smp_call_function_map(func, info, nonatomic, wait,
-				cpumask_of_cpu(cpu));
+	__smp_call_function_map(func, info, wait, cpumask_of_cpu(cpu));
 	spin_unlock(&call_lock);
 	return 0;
 }
@@ -228,7 +224,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
 {
 	spin_lock(&call_lock);
 	cpu_clear(smp_processor_id(), mask);
-	__smp_call_function_map(func, info, 0, wait, mask);
+	__smp_call_function_map(func, info, wait, mask);
 	spin_unlock(&call_lock);
 	return 0;
 }
@@ -303,7 +299,7 @@ static void smp_ptlb_callback(void *info)
 
 void smp_ptlb_all(void)
 {
-	on_each_cpu(smp_ptlb_callback, NULL, 0, 1);
+	on_each_cpu(smp_ptlb_callback, NULL, 1);
 }
 EXPORT_SYMBOL(smp_ptlb_all);
 #endif /* ! CONFIG_64BIT */
@@ -351,7 +347,7 @@ void smp_ctl_set_bit(int cr, int bit)
 	memset(&parms.orvals, 0, sizeof(parms.orvals));
 	memset(&parms.andvals, 0xff, sizeof(parms.andvals));
 	parms.orvals[cr] = 1 << bit;
-	on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1);
+	on_each_cpu(smp_ctl_bit_callback, &parms, 1);
 }
 EXPORT_SYMBOL(smp_ctl_set_bit);
 
@@ -365,7 +361,7 @@ void smp_ctl_clear_bit(int cr, int bit)
 	memset(&parms.orvals, 0, sizeof(parms.orvals));
 	memset(&parms.andvals, 0xff, sizeof(parms.andvals));
 	parms.andvals[cr] = ~(1L << bit);
-	on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1);
+	on_each_cpu(smp_ctl_bit_callback, &parms, 1);
 }
 EXPORT_SYMBOL(smp_ctl_clear_bit);
 
@@ -868,7 +864,8 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_configure_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t count;
 
@@ -878,8 +875,9 @@ static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
 	return count;
 }
 
-static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf,
-				   size_t count)
+static ssize_t cpu_configure_store(struct sys_device *dev,
+				  struct sysdev_attribute *attr,
+				  const char *buf, size_t count)
 {
 	int cpu = dev->id;
 	int val, rc;
@@ -926,7 +924,8 @@ out:
 static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_polarization_show(struct sys_device *dev,
+				     struct sysdev_attribute *attr, char *buf)
 {
 	int cpu = dev->id;
 	ssize_t count;
@@ -954,7 +953,8 @@ static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL);
 
-static ssize_t show_cpu_address(struct sys_device *dev, char *buf)
+static ssize_t show_cpu_address(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]);
 }
@@ -974,7 +974,8 @@ static struct attribute_group cpu_common_attr_group = {
 	.attrs = cpu_common_attrs,
 };
 
-static ssize_t show_capability(struct sys_device *dev, char *buf)
+static ssize_t show_capability(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned int capability;
 	int rc;
@@ -986,7 +987,8 @@ static ssize_t show_capability(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(capability, 0444, show_capability, NULL);
 
-static ssize_t show_idle_count(struct sys_device *dev, char *buf)
+static ssize_t show_idle_count(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long idle_count;
@@ -999,7 +1001,8 @@ static ssize_t show_idle_count(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL);
 
-static ssize_t show_idle_time(struct sys_device *dev, char *buf)
+static ssize_t show_idle_time(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long new_time;
@@ -1116,7 +1119,9 @@ out:
 	return rc;
 }
 
-static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
+static ssize_t __ref rescan_store(struct sys_device *dev,
+				  struct sysdev_attribute *attr,
+				  const char *buf,
 				  size_t count)
 {
 	int rc;
@@ -1127,7 +1132,9 @@ static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
 static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t dispatching_show(struct sys_device *dev, char *buf)
+static ssize_t dispatching_show(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				char *buf)
 {
 	ssize_t count;
 
@@ -1137,8 +1144,9 @@ static ssize_t dispatching_show(struct sys_device *dev, char *buf)
 	return count;
 }
 
-static ssize_t dispatching_store(struct sys_device *dev, const char *buf,
-				 size_t count)
+static ssize_t dispatching_store(struct sys_device *dev,
+				 struct sysdev_attribute *attr,
+				 const char *buf, size_t count)
 {
 	int val, rc;
 	char delim;
diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c
index 85e46a5d0e08..8841919ef7e6 100644
--- a/arch/s390/kernel/stacktrace.c
+++ b/arch/s390/kernel/stacktrace.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/kallsyms.h>
+#include <linux/module.h>
 
 static unsigned long save_context_stack(struct stack_trace *trace,
 					unsigned long sp,
@@ -81,6 +82,7 @@ void save_stack_trace(struct stack_trace *trace)
 			   S390_lowcore.thread_info,
 			   S390_lowcore.thread_info + THREAD_SIZE, 1);
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
@@ -93,3 +95,4 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 7aec676fefd5..ab70d9bd9261 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -3,7 +3,7 @@
  *    Time of day based timer functions.
  *
  *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Copyright IBM Corp. 1999, 2008
  *    Author(s): Hartmut Penner (hp@de.ibm.com),
  *               Martin Schwidefsky (schwidefsky@de.ibm.com),
  *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
@@ -31,6 +31,7 @@
 #include <linux/notifier.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/bootmem.h>
 #include <asm/uaccess.h>
 #include <asm/delay.h>
 #include <asm/s390_ext.h>
@@ -162,7 +163,7 @@ void init_cpu_timer(void)
 	/* Enable clock comparator timer interrupt. */
 	__ctl_set_bit(0,11);
 
-	/* Always allow ETR external interrupts, even without an ETR. */
+	/* Always allow the timing alert external interrupt. */
 	__ctl_set_bit(0, 4);
 }
 
@@ -170,8 +171,21 @@ static void clock_comparator_interrupt(__u16 code)
 {
 }
 
+static void etr_timing_alert(struct etr_irq_parm *);
+static void stp_timing_alert(struct stp_irq_parm *);
+
+static void timing_alert_interrupt(__u16 code)
+{
+	if (S390_lowcore.ext_params & 0x00c40000)
+		etr_timing_alert((struct etr_irq_parm *)
+				 &S390_lowcore.ext_params);
+	if (S390_lowcore.ext_params & 0x00038000)
+		stp_timing_alert((struct stp_irq_parm *)
+				 &S390_lowcore.ext_params);
+}
+
 static void etr_reset(void);
-static void etr_ext_handler(__u16);
+static void stp_reset(void);
 
 /*
  * Get the TOD clock running.
@@ -181,6 +195,7 @@ static u64 __init reset_tod_clock(void)
 	u64 time;
 
 	etr_reset();
+	stp_reset();
 	if (store_clock(&time) == 0)
 		return time;
 	/* TOD clock not running. Set the clock to Unix Epoch. */
@@ -231,8 +246,9 @@ void __init time_init(void)
 	if (clocksource_register(&clocksource_tod) != 0)
 		panic("Could not register TOD clock source");
 
-	/* request the etr external interrupt */
-	if (register_early_external_interrupt(0x1406, etr_ext_handler,
+	/* request the timing alert external interrupt */
+	if (register_early_external_interrupt(0x1406,
+					      timing_alert_interrupt,
 					      &ext_int_etr_cc) != 0)
 		panic("Couldn't request external interrupt 0x1406");
 
@@ -245,10 +261,112 @@ void __init time_init(void)
 }
 
 /*
+ * The time is "clock". old is what we think the time is.
+ * Adjust the value by a multiple of jiffies and add the delta to ntp.
+ * "delay" is an approximation how long the synchronization took. If
+ * the time correction is positive, then "delay" is subtracted from
+ * the time difference and only the remaining part is passed to ntp.
+ */
+static unsigned long long adjust_time(unsigned long long old,
+				      unsigned long long clock,
+				      unsigned long long delay)
+{
+	unsigned long long delta, ticks;
+	struct timex adjust;
+
+	if (clock > old) {
+		/* It is later than we thought. */
+		delta = ticks = clock - old;
+		delta = ticks = (delta < delay) ? 0 : delta - delay;
+		delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
+		adjust.offset = ticks * (1000000 / HZ);
+	} else {
+		/* It is earlier than we thought. */
+		delta = ticks = old - clock;
+		delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
+		delta = -delta;
+		adjust.offset = -ticks * (1000000 / HZ);
+	}
+	jiffies_timer_cc += delta;
+	if (adjust.offset != 0) {
+		printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
+		       adjust.offset);
+		adjust.modes = ADJ_OFFSET_SINGLESHOT;
+		do_adjtimex(&adjust);
+	}
+	return delta;
+}
+
+static DEFINE_PER_CPU(atomic_t, clock_sync_word);
+static unsigned long clock_sync_flags;
+
+#define CLOCK_SYNC_HAS_ETR	0
+#define CLOCK_SYNC_HAS_STP	1
+#define CLOCK_SYNC_ETR		2
+#define CLOCK_SYNC_STP		3
+
+/*
+ * The synchronous get_clock function. It will write the current clock
+ * value to the clock pointer and return 0 if the clock is in sync with
+ * the external time source. If the clock mode is local it will return
+ * -ENOSYS and -EAGAIN if the clock is not in sync with the external
+ * reference.
+ */
+int get_sync_clock(unsigned long long *clock)
+{
+	atomic_t *sw_ptr;
+	unsigned int sw0, sw1;
+
+	sw_ptr = &get_cpu_var(clock_sync_word);
+	sw0 = atomic_read(sw_ptr);
+	*clock = get_clock();
+	sw1 = atomic_read(sw_ptr);
+	put_cpu_var(clock_sync_sync);
+	if (sw0 == sw1 && (sw0 & 0x80000000U))
+		/* Success: time is in sync. */
+		return 0;
+	if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags) &&
+	    !test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
+		return -ENOSYS;
+	if (!test_bit(CLOCK_SYNC_ETR, &clock_sync_flags) &&
+	    !test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
+		return -EACCES;
+	return -EAGAIN;
+}
+EXPORT_SYMBOL(get_sync_clock);
+
+/*
+ * Make get_sync_clock return -EAGAIN.
+ */
+static void disable_sync_clock(void *dummy)
+{
+	atomic_t *sw_ptr = &__get_cpu_var(clock_sync_word);
+	/*
+	 * Clear the in-sync bit 2^31. All get_sync_clock calls will
+	 * fail until the sync bit is turned back on. In addition
+	 * increase the "sequence" counter to avoid the race of an
+	 * etr event and the complete recovery against get_sync_clock.
+	 */
+	atomic_clear_mask(0x80000000, sw_ptr);
+	atomic_inc(sw_ptr);
+}
+
+/*
+ * Make get_sync_clock return 0 again.
+ * Needs to be called from a context disabled for preemption.
+ */
+static void enable_sync_clock(void)
+{
+	atomic_t *sw_ptr = &__get_cpu_var(clock_sync_word);
+	atomic_set_mask(0x80000000, sw_ptr);
+}
+
+/*
  * External Time Reference (ETR) code.
  */
 static int etr_port0_online;
 static int etr_port1_online;
+static int etr_steai_available;
 
 static int __init early_parse_etr(char *p)
 {
@@ -273,12 +391,6 @@ enum etr_event {
 	ETR_EVENT_UPDATE,
 };
 
-enum etr_flags {
-	ETR_FLAG_ENOSYS,
-	ETR_FLAG_EACCES,
-	ETR_FLAG_STEAI,
-};
-
 /*
  * Valid bit combinations of the eacr register are (x = don't care):
  * e0 e1 dp p0 p1 ea es sl
@@ -305,74 +417,18 @@ enum etr_flags {
  */
 static struct etr_eacr etr_eacr;
 static u64 etr_tolec;			/* time of last eacr update */
-static unsigned long etr_flags;
 static struct etr_aib etr_port0;
 static int etr_port0_uptodate;
 static struct etr_aib etr_port1;
 static int etr_port1_uptodate;
 static unsigned long etr_events;
 static struct timer_list etr_timer;
-static DEFINE_PER_CPU(atomic_t, etr_sync_word);
 
 static void etr_timeout(unsigned long dummy);
 static void etr_work_fn(struct work_struct *work);
 static DECLARE_WORK(etr_work, etr_work_fn);
 
 /*
- * The etr get_clock function. It will write the current clock value
- * to the clock pointer and return 0 if the clock is in sync with the
- * external time source. If the clock mode is local it will return
- * -ENOSYS and -EAGAIN if the clock is not in sync with the external
- * reference. This function is what ETR is all about..
- */
-int get_sync_clock(unsigned long long *clock)
-{
-	atomic_t *sw_ptr;
-	unsigned int sw0, sw1;
-
-	sw_ptr = &get_cpu_var(etr_sync_word);
-	sw0 = atomic_read(sw_ptr);
-	*clock = get_clock();
-	sw1 = atomic_read(sw_ptr);
-	put_cpu_var(etr_sync_sync);
-	if (sw0 == sw1 && (sw0 & 0x80000000U))
-		/* Success: time is in sync. */
-		return 0;
-	if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
-		return -ENOSYS;
-	if (test_bit(ETR_FLAG_EACCES, &etr_flags))
-		return -EACCES;
-	return -EAGAIN;
-}
-EXPORT_SYMBOL(get_sync_clock);
-
-/*
- * Make get_sync_clock return -EAGAIN.
- */
-static void etr_disable_sync_clock(void *dummy)
-{
-	atomic_t *sw_ptr = &__get_cpu_var(etr_sync_word);
-	/*
-	 * Clear the in-sync bit 2^31. All get_sync_clock calls will
-	 * fail until the sync bit is turned back on. In addition
-	 * increase the "sequence" counter to avoid the race of an
-	 * etr event and the complete recovery against get_sync_clock.
-	 */
-	atomic_clear_mask(0x80000000, sw_ptr);
-	atomic_inc(sw_ptr);
-}
-
-/*
- * Make get_sync_clock return 0 again.
- * Needs to be called from a context disabled for preemption.
- */
-static void etr_enable_sync_clock(void)
-{
-	atomic_t *sw_ptr = &__get_cpu_var(etr_sync_word);
-	atomic_set_mask(0x80000000, sw_ptr);
-}
-
-/*
  * Reset ETR attachment.
  */
 static void etr_reset(void)
@@ -381,15 +437,13 @@ static void etr_reset(void)
 		.e0 = 0, .e1 = 0, ._pad0 = 4, .dp = 0,
 		.p0 = 0, .p1 = 0, ._pad1 = 0, .ea = 0,
 		.es = 0, .sl = 0 };
-	if (etr_setr(&etr_eacr) == 0)
+	if (etr_setr(&etr_eacr) == 0) {
 		etr_tolec = get_clock();
-	else {
-		set_bit(ETR_FLAG_ENOSYS, &etr_flags);
-		if (etr_port0_online || etr_port1_online) {
-			printk(KERN_WARNING "Running on non ETR capable "
-			       "machine, only local mode available.\n");
-			etr_port0_online = etr_port1_online = 0;
-		}
+		set_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags);
+	} else if (etr_port0_online || etr_port1_online) {
+		printk(KERN_WARNING "Running on non ETR capable "
+		       "machine, only local mode available.\n");
+		etr_port0_online = etr_port1_online = 0;
 	}
 }
 
@@ -397,14 +451,12 @@ static int __init etr_init(void)
 {
 	struct etr_aib aib;
 
-	if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
+	if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags))
 		return 0;
 	/* Check if this machine has the steai instruction. */
 	if (etr_steai(&aib, ETR_STEAI_STEPPING_PORT) == 0)
-		set_bit(ETR_FLAG_STEAI, &etr_flags);
+		etr_steai_available = 1;
 	setup_timer(&etr_timer, etr_timeout, 0UL);
-	if (!etr_port0_online && !etr_port1_online)
-		set_bit(ETR_FLAG_EACCES, &etr_flags);
 	if (etr_port0_online) {
 		set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
 		schedule_work(&etr_work);
@@ -435,7 +487,8 @@ void etr_switch_to_local(void)
 {
 	if (!etr_eacr.sl)
 		return;
-	etr_disable_sync_clock(NULL);
+	if (test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
+		disable_sync_clock(NULL);
 	set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events);
 	schedule_work(&etr_work);
 }
@@ -450,23 +503,21 @@ void etr_sync_check(void)
 {
 	if (!etr_eacr.es)
 		return;
-	etr_disable_sync_clock(NULL);
+	if (test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
+		disable_sync_clock(NULL);
 	set_bit(ETR_EVENT_SYNC_CHECK, &etr_events);
 	schedule_work(&etr_work);
 }
 
 /*
- * ETR external interrupt. There are two causes:
+ * ETR timing alert. There are two causes:
  * 1) port state change, check the usability of the port
  * 2) port alert, one of the ETR-data-validity bits (v1-v2 bits of the
  *    sldr-status word) or ETR-data word 1 (edf1) or ETR-data word 3 (edf3)
  *    or ETR-data word 4 (edf4) has changed.
  */
-static void etr_ext_handler(__u16 code)
+static void etr_timing_alert(struct etr_irq_parm *intparm)
 {
-	struct etr_interruption_parameter *intparm =
-		(struct etr_interruption_parameter *) &S390_lowcore.ext_params;
-
 	if (intparm->pc0)
 		/* ETR port 0 state change. */
 		set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
@@ -591,58 +642,23 @@ static int etr_aib_follows(struct etr_aib *a1, struct etr_aib *a2, int p)
 	return 1;
 }
 
-/*
- * The time is "clock". old is what we think the time is.
- * Adjust the value by a multiple of jiffies and add the delta to ntp.
- * "delay" is an approximation how long the synchronization took. If
- * the time correction is positive, then "delay" is subtracted from
- * the time difference and only the remaining part is passed to ntp.
- */
-static unsigned long long etr_adjust_time(unsigned long long old,
-					  unsigned long long clock,
-					  unsigned long long delay)
-{
-	unsigned long long delta, ticks;
-	struct timex adjust;
-
-	if (clock > old) {
-		/* It is later than we thought. */
-		delta = ticks = clock - old;
-		delta = ticks = (delta < delay) ? 0 : delta - delay;
-		delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
-		adjust.offset = ticks * (1000000 / HZ);
-	} else {
-		/* It is earlier than we thought. */
-		delta = ticks = old - clock;
-		delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
-		delta = -delta;
-		adjust.offset = -ticks * (1000000 / HZ);
-	}
-	jiffies_timer_cc += delta;
-	if (adjust.offset != 0) {
-		printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
-		       adjust.offset);
-		adjust.modes = ADJ_OFFSET_SINGLESHOT;
-		do_adjtimex(&adjust);
-	}
-	return delta;
-}
-
-static struct {
+struct clock_sync_data {
 	int in_sync;
 	unsigned long long fixup_cc;
-} etr_sync;
+};
 
-static void etr_sync_cpu_start(void *dummy)
+static void clock_sync_cpu_start(void *dummy)
 {
-	etr_enable_sync_clock();
+	struct clock_sync_data *sync = dummy;
+
+	enable_sync_clock();
 	/*
 	 * This looks like a busy wait loop but it isn't. etr_sync_cpus
 	 * is called on all other cpus while the TOD clocks is stopped.
 	 * __udelay will stop the cpu on an enabled wait psw until the
 	 * TOD is running again.
 	 */
-	while (etr_sync.in_sync == 0) {
+	while (sync->in_sync == 0) {
 		__udelay(1);
 		/*
 		 * A different cpu changes *in_sync. Therefore use
@@ -650,17 +666,17 @@ static void etr_sync_cpu_start(void *dummy)
 		 */
 		barrier();
 	}
-	if (etr_sync.in_sync != 1)
+	if (sync->in_sync != 1)
 		/* Didn't work. Clear per-cpu in sync bit again. */
-		etr_disable_sync_clock(NULL);
+		disable_sync_clock(NULL);
 	/*
 	 * This round of TOD syncing is done. Set the clock comparator
 	 * to the next tick and let the processor continue.
 	 */
-	fixup_clock_comparator(etr_sync.fixup_cc);
+	fixup_clock_comparator(sync->fixup_cc);
 }
 
-static void etr_sync_cpu_end(void *dummy)
+static void clock_sync_cpu_end(void *dummy)
 {
 }
 
@@ -672,6 +688,7 @@ static void etr_sync_cpu_end(void *dummy)
 static int etr_sync_clock(struct etr_aib *aib, int port)
 {
 	struct etr_aib *sync_port;
+	struct clock_sync_data etr_sync;
 	unsigned long long clock, old_clock, delay, delta;
 	int follows;
 	int rc;
@@ -690,9 +707,9 @@ static int etr_sync_clock(struct etr_aib *aib, int port)
 	 */
 	memset(&etr_sync, 0, sizeof(etr_sync));
 	preempt_disable();
-	smp_call_function(etr_sync_cpu_start, NULL, 0, 0);
+	smp_call_function(clock_sync_cpu_start, &etr_sync, 0);
 	local_irq_disable();
-	etr_enable_sync_clock();
+	enable_sync_clock();
 
 	/* Set clock to next OTE. */
 	__ctl_set_bit(14, 21);
@@ -707,13 +724,13 @@ static int etr_sync_clock(struct etr_aib *aib, int port)
 		/* Adjust Linux timing variables. */
 		delay = (unsigned long long)
 			(aib->edf2.etv - sync_port->edf2.etv) << 32;
-		delta = etr_adjust_time(old_clock, clock, delay);
+		delta = adjust_time(old_clock, clock, delay);
 		etr_sync.fixup_cc = delta;
 		fixup_clock_comparator(delta);
 		/* Verify that the clock is properly set. */
 		if (!etr_aib_follows(sync_port, aib, port)) {
 			/* Didn't work. */
-			etr_disable_sync_clock(NULL);
+			disable_sync_clock(NULL);
 			etr_sync.in_sync = -EAGAIN;
 			rc = -EAGAIN;
 		} else {
@@ -724,12 +741,12 @@ static int etr_sync_clock(struct etr_aib *aib, int port)
 		/* Could not set the clock ?!? */
 		__ctl_clear_bit(0, 29);
 		__ctl_clear_bit(14, 21);
-		etr_disable_sync_clock(NULL);
+		disable_sync_clock(NULL);
 		etr_sync.in_sync = -EAGAIN;
 		rc = -EAGAIN;
 	}
 	local_irq_enable();
-	smp_call_function(etr_sync_cpu_end,NULL,0,0);
+	smp_call_function(clock_sync_cpu_end, NULL, 0);
 	preempt_enable();
 	return rc;
 }
@@ -832,7 +849,7 @@ static struct etr_eacr etr_handle_update(struct etr_aib *aib,
 	 * Do not try to get the alternate port aib if the clock
 	 * is not in sync yet.
 	 */
-	if (!eacr.es)
+	if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags) && !eacr.es)
 		return eacr;
 
 	/*
@@ -840,7 +857,7 @@ static struct etr_eacr etr_handle_update(struct etr_aib *aib,
 	 * the other port immediately. If only stetr is available the
 	 * data-port bit toggle has to be used.
 	 */
-	if (test_bit(ETR_FLAG_STEAI, &etr_flags)) {
+	if (etr_steai_available) {
 		if (eacr.p0 && !etr_port0_uptodate) {
 			etr_steai_cv(&etr_port0, ETR_STEAI_PORT_0);
 			etr_port0_uptodate = 1;
@@ -909,10 +926,10 @@ static void etr_work_fn(struct work_struct *work)
 	if (!eacr.ea) {
 		/* Both ports offline. Reset everything. */
 		eacr.dp = eacr.es = eacr.sl = 0;
-		on_each_cpu(etr_disable_sync_clock, NULL, 0, 1);
+		on_each_cpu(disable_sync_clock, NULL, 1);
 		del_timer_sync(&etr_timer);
 		etr_update_eacr(eacr);
-		set_bit(ETR_FLAG_EACCES, &etr_flags);
+		clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 		return;
 	}
 
@@ -953,7 +970,6 @@ static void etr_work_fn(struct work_struct *work)
 			eacr.e1 = 1;
 		sync_port = (etr_port0_uptodate &&
 			     etr_port_valid(&etr_port0, 0)) ? 0 : -1;
-		clear_bit(ETR_FLAG_EACCES, &etr_flags);
 	} else if (eacr.p1 && aib.esw.psc1 == etr_lpsc_pps_mode) {
 		eacr.sl = 0;
 		eacr.e0 = 0;
@@ -962,7 +978,6 @@ static void etr_work_fn(struct work_struct *work)
 			eacr.es = 0;
 		sync_port = (etr_port1_uptodate &&
 			     etr_port_valid(&etr_port1, 1)) ? 1 : -1;
-		clear_bit(ETR_FLAG_EACCES, &etr_flags);
 	} else if (eacr.p0 && aib.esw.psc0 == etr_lpsc_operational_step) {
 		eacr.sl = 1;
 		eacr.e0 = 1;
@@ -976,7 +991,6 @@ static void etr_work_fn(struct work_struct *work)
 			eacr.e1 = 1;
 		sync_port = (etr_port0_uptodate &&
 			     etr_port_valid(&etr_port0, 0)) ? 0 : -1;
-		clear_bit(ETR_FLAG_EACCES, &etr_flags);
 	} else if (eacr.p1 && aib.esw.psc1 == etr_lpsc_operational_step) {
 		eacr.sl = 1;
 		eacr.e0 = 0;
@@ -985,19 +999,22 @@ static void etr_work_fn(struct work_struct *work)
 			eacr.es = 0;
 		sync_port = (etr_port1_uptodate &&
 			     etr_port_valid(&etr_port1, 1)) ? 1 : -1;
-		clear_bit(ETR_FLAG_EACCES, &etr_flags);
 	} else {
 		/* Both ports not usable. */
 		eacr.es = eacr.sl = 0;
 		sync_port = -1;
-		set_bit(ETR_FLAG_EACCES, &etr_flags);
+		clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 	}
 
+	if (!test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
+		eacr.es = 0;
+
 	/*
 	 * If the clock is in sync just update the eacr and return.
 	 * If there is no valid sync port wait for a port update.
 	 */
-	if (eacr.es || sync_port < 0) {
+	if (test_bit(CLOCK_SYNC_STP, &clock_sync_flags) ||
+	    eacr.es || sync_port < 0) {
 		etr_update_eacr(eacr);
 		etr_set_tolec_timeout(now);
 		return;
@@ -1018,11 +1035,13 @@ static void etr_work_fn(struct work_struct *work)
 	 * and set up a timer to try again after 0.5 seconds
 	 */
 	etr_update_eacr(eacr);
+	set_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 	if (now < etr_tolec + (1600000 << 12) ||
 	    etr_sync_clock(&aib, sync_port) != 0) {
 		/* Sync failed. Try again in 1/2 second. */
 		eacr.es = 0;
 		etr_update_eacr(eacr);
+		clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 		etr_set_sync_timeout();
 	} else
 		etr_set_tolec_timeout(now);
@@ -1081,7 +1100,9 @@ static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev)
 		return etr_port1_online ? &etr_port1 : NULL;
 }
 
-static ssize_t etr_online_show(struct sys_device *dev, char *buf)
+static ssize_t etr_online_show(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				char *buf)
 {
 	unsigned int online;
 
@@ -1090,15 +1111,16 @@ static ssize_t etr_online_show(struct sys_device *dev, char *buf)
 }
 
 static ssize_t etr_online_store(struct sys_device *dev,
-			      const char *buf, size_t count)
+				struct sysdev_attribute *attr,
+				const char *buf, size_t count)
 {
 	unsigned int value;
 
 	value = simple_strtoul(buf, NULL, 0);
 	if (value != 0 && value != 1)
 		return -EINVAL;
-	if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
-		return -ENOSYS;
+	if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags))
+		return -EOPNOTSUPP;
 	if (dev == &etr_port0_dev) {
 		if (etr_port0_online == value)
 			return count;	/* Nothing to do. */
@@ -1117,7 +1139,9 @@ static ssize_t etr_online_store(struct sys_device *dev,
 
 static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store);
 
-static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
+static ssize_t etr_stepping_control_show(struct sys_device *dev,
+					struct sysdev_attribute *attr,
+					char *buf)
 {
 	return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
 		       etr_eacr.e0 : etr_eacr.e1);
@@ -1125,7 +1149,8 @@ static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
 
-static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
+static ssize_t etr_mode_code_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	if (!etr_port0_online && !etr_port1_online)
 		/* Status word is not uptodate if both ports are offline. */
@@ -1136,7 +1161,8 @@ static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL);
 
-static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
+static ssize_t etr_untuned_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1147,7 +1173,8 @@ static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL);
 
-static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_network_id_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1158,7 +1185,8 @@ static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL);
 
-static ssize_t etr_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_id_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1169,7 +1197,8 @@ static ssize_t etr_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(id, 0400, etr_id_show, NULL);
 
-static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
+static ssize_t etr_port_number_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1180,7 +1209,8 @@ static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL);
 
-static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
+static ssize_t etr_coupled_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1191,7 +1221,8 @@ static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL);
 
-static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
+static ssize_t etr_local_time_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1202,7 +1233,8 @@ static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL);
 
-static ssize_t etr_utc_offset_show(struct sys_device *dev, char *buf)
+static ssize_t etr_utc_offset_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1292,3 +1324,318 @@ out:
 }
 
 device_initcall(etr_init_sysfs);
+
+/*
+ * Server Time Protocol (STP) code.
+ */
+static int stp_online;
+static struct stp_sstpi stp_info;
+static void *stp_page;
+
+static void stp_work_fn(struct work_struct *work);
+static DECLARE_WORK(stp_work, stp_work_fn);
+
+static int __init early_parse_stp(char *p)
+{
+	if (strncmp(p, "off", 3) == 0)
+		stp_online = 0;
+	else if (strncmp(p, "on", 2) == 0)
+		stp_online = 1;
+	return 0;
+}
+early_param("stp", early_parse_stp);
+
+/*
+ * Reset STP attachment.
+ */
+static void stp_reset(void)
+{
+	int rc;
+
+	stp_page = alloc_bootmem_pages(PAGE_SIZE);
+	rc = chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+	if (rc == 1)
+		set_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags);
+	else if (stp_online) {
+		printk(KERN_WARNING "Running on non STP capable machine.\n");
+		free_bootmem((unsigned long) stp_page, PAGE_SIZE);
+		stp_page = NULL;
+		stp_online = 0;
+	}
+}
+
+static int __init stp_init(void)
+{
+	if (test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags) && stp_online)
+		schedule_work(&stp_work);
+	return 0;
+}
+
+arch_initcall(stp_init);
+
+/*
+ * STP timing alert. There are three causes:
+ * 1) timing status change
+ * 2) link availability change
+ * 3) time control parameter change
+ * In all three cases we are only interested in the clock source state.
+ * If a STP clock source is now available use it.
+ */
+static void stp_timing_alert(struct stp_irq_parm *intparm)
+{
+	if (intparm->tsc || intparm->lac || intparm->tcpc)
+		schedule_work(&stp_work);
+}
+
+/*
+ * STP sync check machine check. This is called when the timing state
+ * changes from the synchronized state to the unsynchronized state.
+ * After a STP sync check the clock is not in sync. The machine check
+ * is broadcasted to all cpus at the same time.
+ */
+void stp_sync_check(void)
+{
+	if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
+		return;
+	disable_sync_clock(NULL);
+	schedule_work(&stp_work);
+}
+
+/*
+ * STP island condition machine check. This is called when an attached
+ * server  attempts to communicate over an STP link and the servers
+ * have matching CTN ids and have a valid stratum-1 configuration
+ * but the configurations do not match.
+ */
+void stp_island_check(void)
+{
+	if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
+		return;
+	disable_sync_clock(NULL);
+	schedule_work(&stp_work);
+}
+
+/*
+ * STP tasklet. Check for the STP state and take over the clock
+ * synchronization if the STP clock source is usable.
+ */
+static void stp_work_fn(struct work_struct *work)
+{
+	struct clock_sync_data stp_sync;
+	unsigned long long old_clock, delta;
+	int rc;
+
+	if (!stp_online) {
+		chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+		return;
+	}
+
+	rc = chsc_sstpc(stp_page, STP_OP_CTRL, 0xb0e0);
+	if (rc)
+		return;
+
+	rc = chsc_sstpi(stp_page, &stp_info, sizeof(struct stp_sstpi));
+	if (rc || stp_info.c == 0)
+		return;
+
+	/*
+	 * Catch all other cpus and make them wait until we have
+	 * successfully synced the clock. smp_call_function will
+	 * return after all other cpus are in clock_sync_cpu_start.
+	 */
+	memset(&stp_sync, 0, sizeof(stp_sync));
+	preempt_disable();
+	smp_call_function(clock_sync_cpu_start, &stp_sync, 0);
+	local_irq_disable();
+	enable_sync_clock();
+
+	set_bit(CLOCK_SYNC_STP, &clock_sync_flags);
+	if (test_and_clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
+		schedule_work(&etr_work);
+
+	rc = 0;
+	if (stp_info.todoff[0] || stp_info.todoff[1] ||
+	    stp_info.todoff[2] || stp_info.todoff[3] ||
+	    stp_info.tmd != 2) {
+		old_clock = get_clock();
+		rc = chsc_sstpc(stp_page, STP_OP_SYNC, 0);
+		if (rc == 0) {
+			delta = adjust_time(old_clock, get_clock(), 0);
+			fixup_clock_comparator(delta);
+			rc = chsc_sstpi(stp_page, &stp_info,
+					sizeof(struct stp_sstpi));
+			if (rc == 0 && stp_info.tmd != 2)
+				rc = -EAGAIN;
+		}
+	}
+	if (rc) {
+		disable_sync_clock(NULL);
+		stp_sync.in_sync = -EAGAIN;
+		clear_bit(CLOCK_SYNC_STP, &clock_sync_flags);
+		if (etr_port0_online || etr_port1_online)
+			schedule_work(&etr_work);
+	} else
+		stp_sync.in_sync = 1;
+
+	local_irq_enable();
+	smp_call_function(clock_sync_cpu_end, NULL, 0);
+	preempt_enable();
+}
+
+/*
+ * STP class sysfs interface functions
+ */
+static struct sysdev_class stp_sysclass = {
+	.name	= "stp",
+};
+
+static ssize_t stp_ctn_id_show(struct sysdev_class *class, char *buf)
+{
+	if (!stp_online)
+		return -ENODATA;
+	return sprintf(buf, "%016llx\n",
+		       *(unsigned long long *) stp_info.ctnid);
+}
+
+static SYSDEV_CLASS_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
+
+static ssize_t stp_ctn_type_show(struct sysdev_class *class, char *buf)
+{
+	if (!stp_online)
+		return -ENODATA;
+	return sprintf(buf, "%i\n", stp_info.ctn);
+}
+
+static SYSDEV_CLASS_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
+
+static ssize_t stp_dst_offset_show(struct sysdev_class *class, char *buf)
+{
+	if (!stp_online || !(stp_info.vbits & 0x2000))
+		return -ENODATA;
+	return sprintf(buf, "%i\n", (int)(s16) stp_info.dsto);
+}
+
+static SYSDEV_CLASS_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
+
+static ssize_t stp_leap_seconds_show(struct sysdev_class *class, char *buf)
+{
+	if (!stp_online || !(stp_info.vbits & 0x8000))
+		return -ENODATA;
+	return sprintf(buf, "%i\n", (int)(s16) stp_info.leaps);
+}
+
+static SYSDEV_CLASS_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
+
+static ssize_t stp_stratum_show(struct sysdev_class *class, char *buf)
+{
+	if (!stp_online)
+		return -ENODATA;
+	return sprintf(buf, "%i\n", (int)(s16) stp_info.stratum);
+}
+
+static SYSDEV_CLASS_ATTR(stratum, 0400, stp_stratum_show, NULL);
+
+static ssize_t stp_time_offset_show(struct sysdev_class *class, char *buf)
+{
+	if (!stp_online || !(stp_info.vbits & 0x0800))
+		return -ENODATA;
+	return sprintf(buf, "%i\n", (int) stp_info.tto);
+}
+
+static SYSDEV_CLASS_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
+
+static ssize_t stp_time_zone_offset_show(struct sysdev_class *class, char *buf)
+{
+	if (!stp_online || !(stp_info.vbits & 0x4000))
+		return -ENODATA;
+	return sprintf(buf, "%i\n", (int)(s16) stp_info.tzo);
+}
+
+static SYSDEV_CLASS_ATTR(time_zone_offset, 0400,
+			 stp_time_zone_offset_show, NULL);
+
+static ssize_t stp_timing_mode_show(struct sysdev_class *class, char *buf)
+{
+	if (!stp_online)
+		return -ENODATA;
+	return sprintf(buf, "%i\n", stp_info.tmd);
+}
+
+static SYSDEV_CLASS_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
+
+static ssize_t stp_timing_state_show(struct sysdev_class *class, char *buf)
+{
+	if (!stp_online)
+		return -ENODATA;
+	return sprintf(buf, "%i\n", stp_info.tst);
+}
+
+static SYSDEV_CLASS_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
+
+static ssize_t stp_online_show(struct sysdev_class *class, char *buf)
+{
+	return sprintf(buf, "%i\n", stp_online);
+}
+
+static ssize_t stp_online_store(struct sysdev_class *class,
+				const char *buf, size_t count)
+{
+	unsigned int value;
+
+	value = simple_strtoul(buf, NULL, 0);
+	if (value != 0 && value != 1)
+		return -EINVAL;
+	if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
+		return -EOPNOTSUPP;
+	stp_online = value;
+	schedule_work(&stp_work);
+	return count;
+}
+
+/*
+ * Can't use SYSDEV_CLASS_ATTR because the attribute should be named
+ * stp/online but attr_online already exists in this file ..
+ */
+static struct sysdev_class_attribute attr_stp_online = {
+	.attr = { .name = "online", .mode = 0600 },
+	.show	= stp_online_show,
+	.store	= stp_online_store,
+};
+
+static struct sysdev_class_attribute *stp_attributes[] = {
+	&attr_ctn_id,
+	&attr_ctn_type,
+	&attr_dst_offset,
+	&attr_leap_seconds,
+	&attr_stp_online,
+	&attr_stratum,
+	&attr_time_offset,
+	&attr_time_zone_offset,
+	&attr_timing_mode,
+	&attr_timing_state,
+	NULL
+};
+
+static int __init stp_init_sysfs(void)
+{
+	struct sysdev_class_attribute **attr;
+	int rc;
+
+	rc = sysdev_class_register(&stp_sysclass);
+	if (rc)
+		goto out;
+	for (attr = stp_attributes; *attr; attr++) {
+		rc = sysdev_class_create_file(&stp_sysclass, *attr);
+		if (rc)
+			goto out_unreg;
+	}
+	return 0;
+out_unreg:
+	for (; attr >= stp_attributes; attr--)
+		sysdev_class_remove_file(&stp_sysclass, *attr);
+	sysdev_class_unregister(&stp_sysclass);
+out:
+	return rc;
+}
+
+device_initcall(stp_init_sysfs);
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 661a07217057..632b13e10053 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -9,7 +9,6 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/sched.h>
-#include <linux/kthread.h>
 #include <linux/workqueue.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
@@ -230,20 +229,9 @@ void arch_update_cpu_topology(void)
 	}
 }
 
-static int topology_kthread(void *data)
-{
-	arch_reinit_sched_domains();
-	return 0;
-}
-
 static void topology_work_fn(struct work_struct *work)
 {
-	/* We can't call arch_reinit_sched_domains() from a multi-threaded
-	 * workqueue context since it may deadlock in case of cpu hotplug.
-	 * So we have to create a kernel thread in order to call
-	 * arch_reinit_sched_domains().
-	 */
-	kthread_run(topology_kthread, NULL, "topology_update");
+	arch_reinit_sched_domains();
 }
 
 void topology_schedule_update(void)
@@ -313,8 +301,6 @@ void __init s390_init_cpu_topology(void)
 		machine_has_topology_irq = 1;
 
 	tl_info = alloc_bootmem_pages(PAGE_SIZE);
-	if (!tl_info)
-		goto error;
 	info = tl_info;
 	stsi(info, 15, 1, 2);
 
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index b4607155e8d0..76c1e60c92f3 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -40,7 +40,6 @@ SECTIONS
 	_etext = .;		/* End of text section */
 
 	NOTES :text :note
-	BUG_TABLE :text
 
 	RODATA
 
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index ca90ee3f930e..0fa5dc5d68e1 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -136,7 +136,7 @@ static inline void set_vtimer(__u64 expires)
 }
 #endif
 
-static void start_cpu_timer(void)
+void vtime_start_cpu_timer(void)
 {
 	struct vtimer_queue *vt_list;
 
@@ -150,7 +150,7 @@ static void start_cpu_timer(void)
 		set_vtimer(vt_list->idle);
 }
 
-static void stop_cpu_timer(void)
+void vtime_stop_cpu_timer(void)
 {
 	struct vtimer_queue *vt_list;
 
@@ -318,8 +318,7 @@ static void internal_add_vtimer(struct vtimer_list *timer)
 	vt_list = &per_cpu(virt_cpu_timer, timer->cpu);
 	spin_lock_irqsave(&vt_list->lock, flags);
 
-	if (timer->cpu != smp_processor_id())
-		printk("internal_add_vtimer: BUG, running on wrong CPU");
+	BUG_ON(timer->cpu != smp_processor_id());
 
 	/* if list is empty we only have to set the timer */
 	if (list_empty(&vt_list->list)) {
@@ -353,25 +352,12 @@ static void internal_add_vtimer(struct vtimer_list *timer)
 	put_cpu();
 }
 
-static inline int prepare_vtimer(struct vtimer_list *timer)
+static inline void prepare_vtimer(struct vtimer_list *timer)
 {
-	if (!timer->function) {
-		printk("add_virt_timer: uninitialized timer\n");
-		return -EINVAL;
-	}
-
-	if (!timer->expires || timer->expires > VTIMER_MAX_SLICE) {
-		printk("add_virt_timer: invalid timer expire value!\n");
-		return -EINVAL;
-	}
-
-	if (vtimer_pending(timer)) {
-		printk("add_virt_timer: timer pending\n");
-		return -EBUSY;
-	}
-
+	BUG_ON(!timer->function);
+	BUG_ON(!timer->expires || timer->expires > VTIMER_MAX_SLICE);
+	BUG_ON(vtimer_pending(timer));
 	timer->cpu = get_cpu();
-	return 0;
 }
 
 /*
@@ -382,10 +368,7 @@ void add_virt_timer(void *new)
 	struct vtimer_list *timer;
 
 	timer = (struct vtimer_list *)new;
-
-	if (prepare_vtimer(timer) < 0)
-		return;
-
+	prepare_vtimer(timer);
 	timer->interval = 0;
 	internal_add_vtimer(timer);
 }
@@ -399,10 +382,7 @@ void add_virt_timer_periodic(void *new)
 	struct vtimer_list *timer;
 
 	timer = (struct vtimer_list *)new;
-
-	if (prepare_vtimer(timer) < 0)
-		return;
-
+	prepare_vtimer(timer);
 	timer->interval = timer->expires;
 	internal_add_vtimer(timer);
 }
@@ -423,15 +403,8 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
 	unsigned long flags;
 	int cpu;
 
-	if (!timer->function) {
-		printk("mod_virt_timer: uninitialized timer\n");
-		return	-EINVAL;
-	}
-
-	if (!expires || expires > VTIMER_MAX_SLICE) {
-		printk("mod_virt_timer: invalid expire range\n");
-		return -EINVAL;
-	}
+	BUG_ON(!timer->function);
+	BUG_ON(!expires || expires > VTIMER_MAX_SLICE);
 
 	/*
 	 * This is a common optimization triggered by the
@@ -444,6 +417,9 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
 	cpu = get_cpu();
 	vt_list = &per_cpu(virt_cpu_timer, cpu);
 
+	/* check if we run on the right CPU */
+	BUG_ON(timer->cpu != cpu);
+
 	/* disable interrupts before test if timer is pending */
 	spin_lock_irqsave(&vt_list->lock, flags);
 
@@ -458,14 +434,6 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
 		return 0;
 	}
 
-	/* check if we run on the right CPU */
-	if (timer->cpu != cpu) {
-		printk("mod_virt_timer: running on wrong CPU, check your code\n");
-		spin_unlock_irqrestore(&vt_list->lock, flags);
-		put_cpu();
-		return -EINVAL;
-	}
-
 	list_del_init(&timer->entry);
 	timer->expires = expires;
 
@@ -536,24 +504,6 @@ void init_cpu_vtimer(void)
 
 }
 
-static int vtimer_idle_notify(struct notifier_block *self,
-			      unsigned long action, void *hcpu)
-{
-	switch (action) {
-	case S390_CPU_IDLE:
-		stop_cpu_timer();
-		break;
-	case S390_CPU_NOT_IDLE:
-		start_cpu_timer();
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block vtimer_idle_nb = {
-	.notifier_call = vtimer_idle_notify,
-};
-
 void __init vtime_init(void)
 {
 	/* request the cpu timer external interrupt */
@@ -561,9 +511,6 @@ void __init vtime_init(void)
 					      &ext_int_info_timer) != 0)
 		panic("Couldn't request external interrupt 0x1005");
 
-	if (register_idle_notifier(&vtimer_idle_nb))
-		panic("Couldn't register idle notifier");
-
 	/* Enable cpu timer interrupts on the boot cpu. */
 	init_cpu_vtimer();
 }
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 84a7fed4cd4e..11230b0db957 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -31,7 +31,7 @@ static int psw_interrupts_disabled(struct kvm_vcpu *vcpu)
 }
 
 static int __interrupt_is_deliverable(struct kvm_vcpu *vcpu,
-				      struct interrupt_info *inti)
+				      struct kvm_s390_interrupt_info *inti)
 {
 	switch (inti->type) {
 	case KVM_S390_INT_EMERGENCY:
@@ -91,7 +91,7 @@ static void __set_cpuflag(struct kvm_vcpu *vcpu, u32 flag)
 }
 
 static void __set_intercept_indicator(struct kvm_vcpu *vcpu,
-				      struct interrupt_info *inti)
+				      struct kvm_s390_interrupt_info *inti)
 {
 	switch (inti->type) {
 	case KVM_S390_INT_EMERGENCY:
@@ -111,7 +111,7 @@ static void __set_intercept_indicator(struct kvm_vcpu *vcpu,
 }
 
 static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
-				   struct interrupt_info *inti)
+				   struct kvm_s390_interrupt_info *inti)
 {
 	const unsigned short table[] = { 2, 4, 4, 6 };
 	int rc, exception = 0;
@@ -290,9 +290,9 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu)
 
 int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 {
-	struct local_interrupt *li = &vcpu->arch.local_int;
-	struct float_interrupt *fi = vcpu->arch.local_int.float_int;
-	struct interrupt_info  *inti;
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
+	struct kvm_s390_interrupt_info  *inti;
 	int rc = 0;
 
 	if (atomic_read(&li->active)) {
@@ -408,9 +408,9 @@ void kvm_s390_idle_wakeup(unsigned long data)
 
 void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 {
-	struct local_interrupt *li = &vcpu->arch.local_int;
-	struct float_interrupt *fi = vcpu->arch.local_int.float_int;
-	struct interrupt_info  *n, *inti = NULL;
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
+	struct kvm_s390_interrupt_info  *n, *inti = NULL;
 	int deliver;
 
 	__reset_intercept_indicators(vcpu);
@@ -465,8 +465,8 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 {
-	struct local_interrupt *li = &vcpu->arch.local_int;
-	struct interrupt_info *inti;
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	struct kvm_s390_interrupt_info *inti;
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
 	if (!inti)
@@ -487,9 +487,9 @@ int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 int kvm_s390_inject_vm(struct kvm *kvm,
 		       struct kvm_s390_interrupt *s390int)
 {
-	struct local_interrupt *li;
-	struct float_interrupt *fi;
-	struct interrupt_info *inti;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_float_interrupt *fi;
+	struct kvm_s390_interrupt_info *inti;
 	int sigcpu;
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
@@ -544,8 +544,8 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 			 struct kvm_s390_interrupt *s390int)
 {
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
 	if (!inti)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 6558b09ff579..1782cbcd2829 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -79,10 +79,6 @@ void kvm_arch_hardware_disable(void *garbage)
 {
 }
 
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 int kvm_arch_hardware_setup(void)
 {
 	return 0;
@@ -198,6 +194,7 @@ out_nokvm:
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	debug_unregister(kvm->arch.dbf);
+	kvm_free_physmem(kvm);
 	free_page((unsigned long)(kvm->arch.sca));
 	kfree(kvm);
 	module_put(THIS_MODULE);
@@ -250,11 +247,16 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gbea = 1;
 }
 
+/* The current code can have up to 256 pages for virtio */
+#define VIRTIODESCSPACE (256ul * 4096ul)
+
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
 	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH);
-	vcpu->arch.sie_block->gmslm = 0xffffffffffUL;
-	vcpu->arch.sie_block->gmsor = 0x000000000000;
+	vcpu->arch.sie_block->gmslm = vcpu->kvm->arch.guest_memsize +
+				      vcpu->kvm->arch.guest_origin +
+				      VIRTIODESCSPACE - 1ul;
+	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	setup_timer(&vcpu->arch.ckc_timer, kvm_s390_idle_wakeup,
@@ -273,7 +275,8 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	if (!vcpu)
 		goto out_nomem;
 
-	vcpu->arch.sie_block = (struct sie_block *) get_zeroed_page(GFP_KERNEL);
+	vcpu->arch.sie_block = (struct kvm_s390_sie_block *)
+					get_zeroed_page(GFP_KERNEL);
 
 	if (!vcpu->arch.sie_block)
 		goto out_free_cpu;
@@ -672,6 +675,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
+
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 {
 	return gfn;
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index c02286c6a931..2e2d2ffb6a07 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -199,7 +199,7 @@ out:
 
 static void handle_stsi_3_2_2(struct kvm_vcpu *vcpu, struct sysinfo_3_2_2 *mem)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	int cpus = 0;
 	int n;
 
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 0a236acfb5f6..5a556114eaa5 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -45,7 +45,7 @@
 
 static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	int rc;
 
 	if (cpu_addr >= KVM_MAX_VCPUS)
@@ -71,9 +71,9 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
 
 static int __sigp_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 	int rc;
 
 	if (cpu_addr >= KVM_MAX_VCPUS)
@@ -108,9 +108,9 @@ unlock:
 
 static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 	int rc;
 
 	if (cpu_addr >= KVM_MAX_VCPUS)
@@ -169,9 +169,9 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 			     u64 *reg)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 	int rc;
 	u8 tmp;
 
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index f4b6124fdb75..f28c43d2f61d 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -72,7 +72,8 @@ void arch_release_hugepage(struct page *page)
 	page[1].index = 0;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
@@ -119,6 +120,11 @@ int pmd_huge(pmd_t pmd)
 	return !!(pmd_val(pmd) & _SEGMENT_ENTRY_LARGE);
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmdp, int write)
 {
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 05598649b326..4993b0f594eb 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -42,38 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
 char  empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
-void show_mem(void)
-{
-	unsigned long i, total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long flags;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  */
@@ -202,3 +170,22 @@ void free_initrd_mem(unsigned long start, unsigned long end)
         }
 }
 #endif
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int arch_add_memory(int nid, u64 start, u64 size)
+{
+	struct pglist_data *pgdat;
+	struct zone *zone;
+	int rc;
+
+	pgdat = NODE_DATA(nid);
+	zone = pgdat->node_zones + ZONE_NORMAL;
+	rc = vmem_add_mapping(start, size);
+	if (rc)
+		return rc;
+	rc = __add_pages(zone, PFN_DOWN(start), PFN_DOWN(size));
+	if (rc)
+		vmem_remove_mapping(start, size);
+	return rc;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 9a854c8e5274..8879938f3356 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux/SuperH Kernel Configuration"
 config SUPERH
 	def_bool y
 	select EMBEDDED
+	select HAVE_CLK
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	help
@@ -688,6 +689,7 @@ config CRASH_DUMP
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on SYS_SUPPORTS_SMP
+	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c
index 17025080db35..0c15b0a50b99 100644
--- a/arch/sh/boards/landisk/gio.c
+++ b/arch/sh/boards/landisk/gio.c
@@ -14,6 +14,7 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 #include <linux/kdev_t.h>
 #include <linux/cdev.h>
 #include <linux/fs.h>
@@ -32,17 +33,20 @@ static int openCnt;
 static int gio_open(struct inode *inode, struct file *filp)
 {
 	int minor;
+	int ret = -ENOENT;
 
+	lock_kernel();
 	minor = MINOR(inode->i_rdev);
 	if (minor < DEVCOUNT) {
 		if (openCnt > 0) {
-			return -EALREADY;
+			ret = -EALREADY;
 		} else {
 			openCnt++;
-			return 0;
+			ret = 0;
 		}
 	}
-	return -ENOENT;
+	unlock_kernel();
+	return ret;
 }
 
 static int gio_close(struct inode *inode, struct file *filp)
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 01af44245b57..963c99322095 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -30,7 +30,6 @@
 
 static struct smc91x_platdata smc91x_info = {
 	.flags = SMC91X_USE_16BIT,
-	.irq_flags = IRQF_TRIGGER_HIGH,
 };
 
 static struct resource smc91x_eth_resources[] = {
@@ -42,7 +41,7 @@ static struct resource smc91x_eth_resources[] = {
 	},
 	[1] = {
 		.start  = 32, /* IRQ0 */
-		.flags  = IORESOURCE_IRQ,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
 
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index adcea31e663e..f386997e4d9c 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -74,8 +74,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -84,11 +82,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -101,38 +95,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 #ifdef CONFIG_SH_STANDARD_BIOS
 size_t strlen(const char *s)
 {
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
index a006ef89b9dd..2941657e18aa 100644
--- a/arch/sh/boot/compressed/misc_64.c
+++ b/arch/sh/boot/compressed/misc_64.c
@@ -72,8 +72,6 @@ static unsigned outcnt = 0;	/* bytes in output buffer */
 static int fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -82,11 +80,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -99,40 +93,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (free_mem_ptr == 0)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
-static void free(void *where)
-{				/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void puts(const char *s)
 {
 }
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index f52db125432f..38f934ab50c7 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -226,7 +226,6 @@ CONFIG_CPU_HAS_PTEA=y
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=33333333
 
 #
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index 9fa66d92a4e7..b68b6cdbb78f 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -231,7 +231,6 @@ CONFIG_CPU_HAS_PTEA=y
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=40000000
 
 #
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 84717d854867..490dcbc2ce33 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -239,7 +239,6 @@ CONFIG_CPU_HAS_SR_RB=y
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=33333333
 
 #
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 240a1cef69aa..2dd83af988f0 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -236,7 +236,6 @@ CONFIG_CPU_HAS_SR_RB=y
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=66666666
 
 #
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index c60b6fd4fc42..167786f9a9bd 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -235,7 +235,6 @@ CONFIG_CPU_HAS_PTEA=y
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=33333333
 
 #
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 51b57c0d1a3c..347ee11351ec 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -23,7 +23,8 @@ static struct sysdev_class dma_sysclass = {
 };
 EXPORT_SYMBOL(dma_sysclass);
 
-static ssize_t dma_show_devices(struct sys_device *dev, char *buf)
+static ssize_t dma_show_devices(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t len = 0;
 	int i;
@@ -57,13 +58,15 @@ static int __init dma_sysclass_init(void)
 }
 postcore_initcall(dma_sysclass_init);
 
-static ssize_t dma_show_dev_id(struct sys_device *dev, char *buf)
+static ssize_t dma_show_dev_id(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "%s\n", channel->dev_id);
 }
 
 static ssize_t dma_store_dev_id(struct sys_device *dev,
+				struct sysdev_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -74,6 +77,7 @@ static ssize_t dma_store_dev_id(struct sys_device *dev,
 static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
 
 static ssize_t dma_store_config(struct sys_device *dev,
+				struct sysdev_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -87,13 +91,15 @@ static ssize_t dma_store_config(struct sys_device *dev,
 
 static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config);
 
-static ssize_t dma_show_mode(struct sys_device *dev, char *buf)
+static ssize_t dma_show_mode(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "0x%08x\n", channel->mode);
 }
 
 static ssize_t dma_store_mode(struct sys_device *dev,
+			      struct sysdev_attribute *attr,
 			      const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -104,7 +110,8 @@ static ssize_t dma_store_mode(struct sys_device *dev,
 static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
 
 #define dma_ro_attr(field, fmt)						\
-static ssize_t dma_show_##field(struct sys_device *dev, char *buf)	\
+static ssize_t dma_show_##field(struct sys_device *dev, 		\
+				struct sysdev_attribute *attr, char *buf)\
 {									\
 	struct dma_channel *channel = to_dma_channel(dev);		\
 	return sprintf(buf, fmt, channel->field);			\
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 08d2e7325252..f57095a2617c 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -76,38 +76,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus)
 	pci_read_bridge_bases(bus);
 }
 
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			struct resource *res, int resource)
-{
-	u32 new, check;
-	int reg;
-
-	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-	if (resource < 6) {
-		reg = PCI_BASE_ADDRESS_0 + 4*resource;
-	} else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-		new |= PCI_ROM_ADDRESS_ENABLE;
-		reg = dev->rom_base_reg;
-	} else {
-		/*
-		 * Somebody might have asked allocation of a non-standard
-		 * resource
-		 */
-		return;
-	}
-
-	pci_write_config_dword(dev, reg, new);
-	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ?
-		PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-		       new, check);
-	}
-}
-
 void pcibios_align_resource(void *data, struct resource *res,
 			    resource_size_t size, resource_size_t align)
 			    __attribute__ ((weak));
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 5c17de51987e..ec1eadce4aaa 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -70,7 +70,7 @@ static void kexec_info(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 
 	unsigned long page_list;
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index b98e37a1f54c..921892c351da 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -86,7 +86,7 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 5d039d168f57..60c50841143e 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -36,13 +36,6 @@ EXPORT_SYMBOL(cpu_possible_map);
 cpumask_t cpu_online_map;
 EXPORT_SYMBOL(cpu_online_map);
 
-static atomic_t cpus_booted = ATOMIC_INIT(0);
-
-/*
- * Run specified function on a particular processor.
- */
-void __smp_call_function(unsigned int cpu);
-
 static inline void __init smp_store_cpu_info(unsigned int cpu)
 {
 	struct sh_cpuinfo *c = cpu_data + cpu;
@@ -175,45 +168,20 @@ static void stop_this_cpu(void *unused)
 
 void smp_send_stop(void)
 {
-	smp_call_function(stop_this_cpu, 0, 1, 0);
+	smp_call_function(stop_this_cpu, 0, 0);
 }
 
-struct smp_fn_call_struct smp_fn_call = {
-	.lock		= __SPIN_LOCK_UNLOCKED(smp_fn_call.lock),
-	.finished	= ATOMIC_INIT(0),
-};
-
-/*
- * The caller of this wants the passed function to run on every cpu.  If wait
- * is set, wait until all cpus have finished the function before returning.
- * The lock is here to protect the call structure.
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function(void (*func)(void *info), void *info, int retry, int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	unsigned int nr_cpus = atomic_read(&cpus_booted);
-	int i;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	spin_lock(&smp_fn_call.lock);
-
-	atomic_set(&smp_fn_call.finished, 0);
-	smp_fn_call.fn = func;
-	smp_fn_call.data = info;
-
-	for (i = 0; i < nr_cpus; i++)
-		if (i != smp_processor_id())
-			plat_send_ipi(i, SMP_MSG_FUNCTION);
-
-	if (wait)
-		while (atomic_read(&smp_fn_call.finished) != (nr_cpus - 1));
+	int cpu;
 
-	spin_unlock(&smp_fn_call.lock);
+	for_each_cpu_mask(cpu, mask)
+		plat_send_ipi(cpu, SMP_MSG_FUNCTION);
+}
 
-	return 0;
+void arch_send_call_function_single_ipi(int cpu)
+{
+	plat_send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
 }
 
 /* Not really SMP stuff ... */
@@ -229,7 +197,7 @@ static void flush_tlb_all_ipi(void *info)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(flush_tlb_all_ipi, 0, 1, 1);
+	on_each_cpu(flush_tlb_all_ipi, 0, 1);
 }
 
 static void flush_tlb_mm_ipi(void *mm)
@@ -255,7 +223,7 @@ void flush_tlb_mm(struct mm_struct *mm)
 	preempt_disable();
 
 	if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
-		smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1, 1);
+		smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1);
 	} else {
 		int i;
 		for (i = 0; i < num_online_cpus(); i++)
@@ -292,7 +260,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 		fd.vma = vma;
 		fd.addr1 = start;
 		fd.addr2 = end;
-		smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1, 1);
+		smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1);
 	} else {
 		int i;
 		for (i = 0; i < num_online_cpus(); i++)
@@ -316,7 +284,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 
 	fd.addr1 = start;
 	fd.addr2 = end;
-	on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1, 1);
+	on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1);
 }
 
 static void flush_tlb_page_ipi(void *info)
@@ -335,7 +303,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 
 		fd.vma = vma;
 		fd.addr1 = page;
-		smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1, 1);
+		smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1);
 	} else {
 		int i;
 		for (i = 0; i < num_online_cpus(); i++)
@@ -359,6 +327,6 @@ void flush_tlb_one(unsigned long asid, unsigned long vaddr)
 	fd.addr1 = asid;
 	fd.addr2 = vaddr;
 
-	smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1, 1);
+	smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1);
 	local_flush_tlb_one(asid, vaddr);
 }
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index d41e561be20e..54d1f61aa007 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -12,6 +12,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 #include <asm/ptrace.h>
 
 /*
@@ -34,3 +35,4 @@ void save_stack_trace(struct stack_trace *trace)
 		}
 	}
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
index 125e493ead82..f0aa5c398656 100644
--- a/arch/sh/kernel/sys_sh32.c
+++ b/arch/sh/kernel/sys_sh32.c
@@ -29,7 +29,7 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (!error) {
 		regs->regs[1] = fd[1];
 		return fd[0];
diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S
index c7113786ecd4..7b4b82bd1156 100644
--- a/arch/sh/kernel/vmlinux_32.lds.S
+++ b/arch/sh/kernel/vmlinux_32.lds.S
@@ -44,7 +44,6 @@ SECTIONS
 
 	_etext = .;			/* End of text section */
 
-	BUG_TABLE
 	NOTES
 	RO_DATA(PAGE_SIZE)
 
diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S
index d1e177009a41..33fa46451406 100644
--- a/arch/sh/kernel/vmlinux_64.lds.S
+++ b/arch/sh/kernel/vmlinux_64.lds.S
@@ -65,7 +65,6 @@ SECTIONS
 
 	_etext = .;			/* End of text section */
 
-	BUG_TABLE
 	NOTES 
 	RO_DATA(PAGE_SIZE)
 
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index ae8c321d6e2a..9304117039c4 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -22,7 +22,8 @@
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -78,6 +79,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index d7df26bd1e54..b75a7acd62fb 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -25,47 +25,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
 unsigned long cached_to_uncached = 0;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, free = 0;
-	int shared = 0, cached = 0, slab = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags, i;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	printk("%d pages of RAM\n", total);
-	printk("%d free pages\n", free);
-	printk("%d reserved pages\n", reserved);
-	printk("%d slab pages\n", slab);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-	printk(KERN_INFO "Total of %ld pages in page table cache\n",
-	       quicklist_total_size());
-}
-
 #ifdef CONFIG_MMU
 static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 {
@@ -191,7 +150,7 @@ void __init paging_init(void)
 		pg_data_t *pgdat = NODE_DATA(nid);
 		unsigned long low, start_pfn;
 
-		start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
+		start_pfn = pgdat->bdata->node_min_pfn;
 		low = pgdat->bdata->node_low_pfn;
 
 		if (max_zone_pfns[ZONE_NORMAL] < low)
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 1663199ce888..095d93bec7cd 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -14,7 +14,6 @@
 #include <linux/pfn.h>
 #include <asm/sections.h>
 
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL_GPL(node_data);
 
@@ -35,7 +34,7 @@ void __init setup_memory(void)
 	NODE_DATA(0) = pfn_to_kaddr(free_pfn);
 	memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
 	free_pfn += PFN_UP(sizeof(struct pglist_data));
-	NODE_DATA(0)->bdata = &plat_node_bdata[0];
+	NODE_DATA(0)->bdata = &bootmem_node_data[0];
 
 	/* Set up node 0 */
 	setup_bootmem_allocator(free_pfn);
@@ -66,7 +65,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	free_pfn += PFN_UP(sizeof(struct pglist_data));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
 	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 0b0ec6e04753..46911bcbf17b 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -293,7 +293,7 @@ void pmb_unmap(unsigned long addr)
 	} while (pmbe);
 }
 
-static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb)
+static void pmb_cache_ctor(void *pmb)
 {
 	struct pmb_entry *pmbe = pmb;
 
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 789724e61e83..375de7c6d082 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -298,20 +298,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 endmenu
 
 source "fs/Kconfig"
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index fef28e267a52..6668e6037af6 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -18,6 +18,7 @@ CHECKFLAGS	+= -D__sparc__
 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
 KBUILD_AFLAGS += -m32
+CPPFLAGS_vmlinux.lds += -m32
 
 #LDFLAGS_vmlinux = -N -Ttext 0xf0004000
 #  Since 2.5.40, the first stage is left not btfix-ed.
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index d06a405ca718..5267d48fb2c6 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -10,6 +10,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
+#include <linux/smp_lock.h>
 #include <linux/pm.h>
 
 #include <asm/io.h>
@@ -55,7 +56,7 @@ __setup("apc=", apc_setup);
  * CPU idle callback function
  * See .../arch/sparc/kernel/process.c
  */
-void apc_swift_idle(void)
+static void apc_swift_idle(void)
 {
 #ifdef APC_DEBUG_LED
 	set_auxio(0x00, AUXIO_LED); 
@@ -75,6 +76,7 @@ static inline void apc_free(void)
 
 static int apc_open(struct inode *inode, struct file *f)
 {
+	cycle_kernel_lock();
 	return 0;
 }
 
@@ -83,54 +85,70 @@ static int apc_release(struct inode *inode, struct file *f)
 	return 0;
 }
 
-static int apc_ioctl(struct inode *inode, struct file *f, 
-		     unsigned int cmd, unsigned long __arg)
+static long apc_ioctl(struct file *f, unsigned int cmd, unsigned long __arg)
 {
 	__u8 inarg, __user *arg;
 
 	arg = (__u8 __user *) __arg;
+
+	lock_kernel();
+
 	switch (cmd) {
 	case APCIOCGFANCTL:
-		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg))
-				return -EFAULT;
+		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg)) {
+			unlock_kernel();
+			return -EFAULT;
+		}
 		break;
 
 	case APCIOCGCPWR:
-		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg))
+		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		break;
 
 	case APCIOCGBPORT:
-		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg))
+		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		break;
 
 	case APCIOCSFANCTL:
-		if (get_user(inarg, arg))
+		if (get_user(inarg, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		apc_writeb(inarg & APC_REGMASK, APC_FANCTL_REG);
 		break;
 	case APCIOCSCPWR:
-		if (get_user(inarg, arg))
+		if (get_user(inarg, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		apc_writeb(inarg & APC_REGMASK, APC_CPOWER_REG);
 		break;
 	case APCIOCSBPORT:
-		if (get_user(inarg, arg))
+		if (get_user(inarg, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		apc_writeb(inarg & APC_BPMASK, APC_BPORT_REG);
 		break;
 	default:
+		unlock_kernel();
 		return -EINVAL;
 	};
 
+	unlock_kernel();
 	return 0;
 }
 
 static const struct file_operations apc_fops = {
-	.ioctl =	apc_ioctl,
-	.open =		apc_open,
-	.release =	apc_release,
+	.unlocked_ioctl =	apc_ioctl,
+	.open =			apc_open,
+	.release =		apc_release,
 };
 
 static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops };
diff --git a/arch/sparc/kernel/asm-offsets.c b/arch/sparc/kernel/asm-offsets.c
index cd3f7694e9b9..b5bb99ed892c 100644
--- a/arch/sparc/kernel/asm-offsets.c
+++ b/arch/sparc/kernel/asm-offsets.c
@@ -18,18 +18,6 @@ int foo(void)
 {
 	DEFINE(AOFF_task_thread, offsetof(struct task_struct, thread));
 	BLANK();
-	/* XXX This is the stuff for sclow.S, kill it. */
-	DEFINE(AOFF_task_pid, offsetof(struct task_struct, pid));
-	DEFINE(AOFF_task_uid, offsetof(struct task_struct, uid));
-	DEFINE(AOFF_task_gid, offsetof(struct task_struct, gid));
-	DEFINE(AOFF_task_euid, offsetof(struct task_struct, euid));
-	DEFINE(AOFF_task_egid, offsetof(struct task_struct, egid));
-	/* DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); */
-	DEFINE(ASIZ_task_uid,	sizeof(current->uid));
-	DEFINE(ASIZ_task_gid,	sizeof(current->gid));
-	DEFINE(ASIZ_task_euid,	sizeof(current->euid));
-	DEFINE(ASIZ_task_egid,	sizeof(current->egid));
-	BLANK();
 	DEFINE(AOFF_thread_fork_kpsr,
 			offsetof(struct thread_struct, fork_kpsr));
 	BLANK();
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index 92c6fc07e59c..97294232259c 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -69,7 +69,7 @@ static inline unsigned long ebus_alloc(size_t size)
 
 /*
  */
-int __init ebus_blacklist_irq(const char *name)
+static int __init ebus_blacklist_irq(const char *name)
 {
 	struct ebus_device_irq *dp;
 
@@ -83,8 +83,8 @@ int __init ebus_blacklist_irq(const char *name)
 	return 0;
 }
 
-void __init fill_ebus_child(struct device_node *dp,
-			    struct linux_ebus_child *dev)
+static void __init fill_ebus_child(struct device_node *dp,
+				   struct linux_ebus_child *dev)
 {
 	const int *regs;
 	const int *irqs;
@@ -144,7 +144,8 @@ void __init fill_ebus_child(struct device_node *dp,
 	}
 }
 
-void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *dev)
+static void __init fill_ebus_device(struct device_node *dp,
+				    struct linux_ebus_device *dev)
 {
 	const struct linux_prom_registers *regs;
 	struct linux_ebus_child *child;
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 4bcfe54f878d..2f96256dc515 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -19,6 +19,7 @@
 #include <asm/vaddrs.h>
 #include <asm/memreg.h>
 #include <asm/page.h>
+#include <asm/pgtable.h>
 #ifdef CONFIG_SUN4
 #include <asm/pgtsun4.h>
 #else
@@ -1317,7 +1318,6 @@ linux_sparc_syscall:
 	bne	linux_fast_syscall
 	 /* Just do first insn from SAVE_ALL in the delay slot */
 
-	.globl	syscall_is_too_hard
 syscall_is_too_hard:
 	SAVE_ALL_HEAD
 	 rd	%wim, %l3
@@ -1544,8 +1544,7 @@ kgdb_trap_low:
 #endif
 
 	.align	4
-	.globl	__handle_exception, flush_patch_exception
-__handle_exception:
+	.globl	flush_patch_exception
 flush_patch_exception:
 	FLUSH_ALL_KERNEL_WINDOWS;
 	ldd	[%o0], %o6
diff --git a/arch/sparc/kernel/etrap.S b/arch/sparc/kernel/etrap.S
index f37d961d67a6..e806fcdc46db 100644
--- a/arch/sparc/kernel/etrap.S
+++ b/arch/sparc/kernel/etrap.S
@@ -228,7 +228,6 @@ tsetup_mmu_patchme:
 	 */
 #define glob_tmp     g1
 
-	.globl	tsetup_sun4c_stackchk
 tsetup_sun4c_stackchk:
 	/* Done by caller: andcc %sp, 0x7, %g0 */
 	bne	trap_setup_user_stack_is_bolixed
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 3bfd6085a91d..50d9a16af795 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -32,7 +32,6 @@
  */
 
 	.align 4
-        .globl  cputyp
 cputyp:
         .word   1
 
@@ -1280,7 +1279,6 @@ halt_me:
  * gets initialized in c-code so all routines can use it.
  */
 
-	.globl	prom_vector_p
 prom_vector_p:
 		.word 0
 
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 7220562cdb34..fc511f3c4c18 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -24,7 +24,7 @@ static struct idprom idprom_buffer;
  * of the Sparc CPU and have a meaningful IDPROM machtype value that we
  * know about.  See asm-sparc/machines.h for empirical constants.
  */
-struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
+static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 /* First, Sun4's */
 { "Sun 4/100 Series", (SM_SUN4 | SM_4_110) },
 { "Sun 4/200 Series", (SM_SUN4 | SM_4_260) },
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 7b17522f59bf..487960919f1f 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -49,13 +49,16 @@
 
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
 
-struct resource *_sparc_find_resource(struct resource *r, unsigned long);
+static struct resource *_sparc_find_resource(struct resource *r,
+					     unsigned long);
 
 static void __iomem *_sparc_ioremap(struct resource *res, u32 bus, u32 pa, int sz);
 static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys,
     unsigned long size, char *name);
 static void _sparc_free_io(struct resource *res);
 
+static void register_proc_sparc_ioport(void);
+
 /* This points to the next to use virtual memory for DVMA mappings */
 static struct resource _sparc_dvma = {
 	.name = "sparc_dvma", .start = DVMA_VADDR, .end = DVMA_END - 1
@@ -539,8 +542,6 @@ void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp)
 
 int __init sbus_arch_preinit(void)
 {
-	extern void register_proc_sparc_ioport(void);
-
 	register_proc_sparc_ioport();
 
 #ifdef CONFIG_SUN4
@@ -853,8 +854,8 @@ _sparc_io_get_info(char *buf, char **start, off_t fpos, int length, int *eof,
  * XXX Too slow. Can have 8192 DVMA pages on sun4m in the worst case.
  * This probably warrants some sort of hashing.
  */
-struct resource *
-_sparc_find_resource(struct resource *root, unsigned long hit)
+static struct resource *_sparc_find_resource(struct resource *root,
+					     unsigned long hit)
 {
         struct resource *tmp;
 
@@ -865,7 +866,7 @@ _sparc_find_resource(struct resource *root, unsigned long hit)
 	return NULL;
 }
 
-void register_proc_sparc_ioport(void)
+static void register_proc_sparc_ioport(void)
 {
 #ifdef CONFIG_PROC_FS
 	create_proc_read_entry("io_map",0,NULL,_sparc_io_get_info,&sparc_iomap);
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index 087390b092b0..93e1d1c65290 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -154,7 +154,7 @@ void (*sparc_init_timers)(irq_handler_t ) =
 struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 int static_irq_count;
 
-struct {
+static struct {
 	struct irqaction *action;
 	int flags;
 } sparc_irq[NR_IRQS];
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index da48d248cc17..4bb430940a61 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -1,6 +1,6 @@
 /*  linux/arch/sparc/kernel/process.c
  *
- *  Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ *  Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  *  Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
  */
 
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/ptrace.h>
@@ -177,6 +176,8 @@ void machine_power_off(void)
 	machine_halt();
 }
 
+#if 0
+
 static DEFINE_SPINLOCK(sparc_backtrace_lock);
 
 void __show_backtrace(unsigned long fp)
@@ -196,7 +197,7 @@ void __show_backtrace(unsigned long fp)
 		       rw->ins[4], rw->ins[5],
 		       rw->ins[6],
 		       rw->ins[7]);
-		print_symbol("%s\n", rw->ins[7]);
+		printk("%pS\n", (void *) rw->ins[7]);
 		rw = (struct reg_window *) rw->ins[6];
 	}
 	spin_unlock_irqrestore(&sparc_backtrace_lock, flags);
@@ -228,7 +229,6 @@ void smp_show_backtrace_all_cpus(void)
 }
 #endif
 
-#if 0
 void show_stackframe(struct sparc_stackf *sf)
 {
 	unsigned long size;
@@ -264,14 +264,14 @@ void show_regs(struct pt_regs *r)
 
         printk("PSR: %08lx PC: %08lx NPC: %08lx Y: %08lx    %s\n",
 	       r->psr, r->pc, r->npc, r->y, print_tainted());
-	print_symbol("PC: <%s>\n", r->pc);
+	printk("PC: <%pS>\n", (void *) r->pc);
 	printk("%%G: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
 	       r->u_regs[0], r->u_regs[1], r->u_regs[2], r->u_regs[3],
 	       r->u_regs[4], r->u_regs[5], r->u_regs[6], r->u_regs[7]);
 	printk("%%O: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
 	       r->u_regs[8], r->u_regs[9], r->u_regs[10], r->u_regs[11],
 	       r->u_regs[12], r->u_regs[13], r->u_regs[14], r->u_regs[15]);
-	print_symbol("RPC: <%s>\n", r->u_regs[15]);
+	printk("RPC: <%pS>\n", (void *) r->u_regs[15]);
 
 	printk("%%L: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
 	       rw->locals[0], rw->locals[1], rw->locals[2], rw->locals[3],
@@ -306,7 +306,7 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 		rw = (struct reg_window *) fp;
 		pc = rw->ins[7];
 		printk("[%08lx : ", pc);
-		print_symbol("%s ] ", pc);
+		printk("%pS ] ", (void *) pc);
 		fp = rw->ins[6];
 	} while (++count < 16);
 	printk("\n");
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index ce30082ab266..891f460b7b96 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -224,8 +224,6 @@ ret_trap_user_stack_is_bolixed:
 	b	signal_p
 	 ld	[%curptr + TI_FLAGS], %g2
 
-
-	.globl	sun4c_rett_stackchk
 sun4c_rett_stackchk:
 	be	1f
 	 and	%fp, 0xfff, %g1		! delay slot
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index a0ea0bc6f471..9e451b21202e 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -67,7 +67,7 @@ struct screen_info screen_info = {
 extern unsigned long trapbase;
 
 /* Pretty sick eh? */
-void prom_sync_me(void)
+static void prom_sync_me(void)
 {
 	unsigned long prom_tbr, flags;
 
@@ -97,7 +97,7 @@ void prom_sync_me(void)
 	return;
 }
 
-unsigned int boot_flags __initdata = 0;
+static unsigned int boot_flags __initdata = 0;
 #define BOOTME_DEBUG  0x1
 
 /* Exported for mm/init.c:paging_init. */
diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c
index 6724ab90f82b..1619ec15c099 100644
--- a/arch/sparc/kernel/smp.c
+++ b/arch/sparc/kernel/smp.c
@@ -35,13 +35,9 @@
 
 #include "irq.h"
 
-int smp_num_cpus = 1;
 volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
 unsigned char boot_cpu_id = 0;
 unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
-int smp_activated = 0;
-volatile int __cpu_number_map[NR_CPUS];
-volatile int __cpu_logical_map[NR_CPUS];
 
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
@@ -55,9 +51,6 @@ cpumask_t smp_commenced_mask = CPU_MASK_NONE;
  * instruction which is much better...
  */
 
-/* Used to make bitops atomic */
-unsigned char bitops_spinlock = 0;
-
 void __cpuinit smp_store_cpu_info(int id)
 {
 	int cpu_node;
diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
index c6ac9fc52563..340fc395fe2d 100644
--- a/arch/sparc/kernel/sun4c_irq.c
+++ b/arch/sparc/kernel/sun4c_irq.c
@@ -68,7 +68,8 @@ unsigned char *interrupt_enable = NULL;
 
 static int sun4c_pil_map[] = { 0, 1, 2, 3, 5, 7, 8, 9 };
 
-unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
+static unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev,
+				       unsigned int sbint)
 {
 	if (sbint >= sizeof(sun4c_pil_map)) {
 		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index 8ac5661cafff..1290b5998f83 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -52,13 +52,13 @@ extern struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 extern int static_irq_count;
 unsigned char cpu_leds[32];
 #ifdef CONFIG_SMP
-unsigned char sbus_tid[32];
+static unsigned char sbus_tid[32];
 #endif
 
 static struct irqaction *irq_action[NR_IRQS];
 extern spinlock_t irq_action_lock;
 
-struct sbus_action {
+static struct sbus_action {
 	struct irqaction *action;
 	/* For SMP this needs to be extended */
 } *sbus_actions;
@@ -267,7 +267,8 @@ unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq)
 		return irq;
 }
 
-unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
+static unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev,
+				       unsigned int sbint)
 {
 	if (sbint >= sizeof(sbus_to_pil)) {
 		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index b92d6d2d5b04..94e02de960ea 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -154,7 +154,8 @@ static unsigned long irq_mask[] = {
 
 static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
 
-unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint) 
+static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev,
+				       unsigned int sbint)
 {
 	if (sbint >= sizeof(sun4m_pil_map)) {
 		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
@@ -163,7 +164,7 @@ unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
 	return sun4m_pil_map[sbint] | 0x30;
 }
 
-inline unsigned long sun4m_get_irqmask(unsigned int irq)
+static unsigned long sun4m_get_irqmask(unsigned int irq)
 {
 	unsigned long mask;
     
@@ -281,7 +282,7 @@ static void sun4m_set_udt(int cpu)
 #define TIMER_IRQ  	(OBIO_INTR | 10)
 #define PROFILE_IRQ	(OBIO_INTR | 14)
 
-struct sun4m_timer_regs *sun4m_timers;
+static struct sun4m_timer_regs *sun4m_timers;
 unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
 
 static void sun4m_clear_clock_irq(void)
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index ffb875aacb7e..406ac1abc83a 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -244,8 +244,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-		    unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
+			     unsigned long arg2, unsigned long arg3,
+			     unsigned long arg4, unsigned long arg5)
 {
 		register int ncpus = SUN4M_NCPUS;
 		unsigned long flags;
@@ -344,7 +345,7 @@ static void __init smp_setup_percpu_timer(void)
 		enable_pil_irq(14);
 }
 
-void __init smp4m_blackbox_id(unsigned *addr)
+static void __init smp4m_blackbox_id(unsigned *addr)
 {
 	int rd = *addr & 0x3e000000;
 	int rs1 = rd >> 11;
@@ -354,7 +355,7 @@ void __init smp4m_blackbox_id(unsigned *addr)
 	addr[2] = 0x80082003 | rd | rs1;	/* and reg, 3, reg */
 }
 
-void __init smp4m_blackbox_current(unsigned *addr)
+static void __init smp4m_blackbox_current(unsigned *addr)
 {
 	int rd = *addr & 0x3e000000;
 	int rs1 = rd >> 11;
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index 3c6b49a53ae8..4d73421559c3 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -97,7 +97,7 @@ asmlinkage int sparc_pipe(struct pt_regs *regs)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error)
 		goto out;
 	regs->u_regs[UREG_I1] = fd[1];
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 5a7c4c8345c3..e1b9233b90ab 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -80,4 +80,5 @@ sys_call_table:
 /*300*/	.long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 /*305*/	.long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime
+/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 53caacbb3982..ab3dd0b257d3 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -46,7 +46,7 @@
 #include "irq.h"
 
 DEFINE_SPINLOCK(rtc_lock);
-enum sparc_clock_type sp_clock_typ;
+static enum sparc_clock_type sp_clock_typ;
 DEFINE_SPINLOCK(mostek_lock);
 void __iomem *mstk48t02_regs = NULL;
 static struct mostek48t08 __iomem *mstk48t08_regs = NULL;
@@ -366,7 +366,7 @@ static int __init clock_init(void)
 fs_initcall(clock_init);
 #endif /* !CONFIG_SUN4 */
 
-void __init sbus_time_init(void)
+static void __init sbus_time_init(void)
 {
 
 	BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c
index 978e9d85949e..5d45d5fd8c99 100644
--- a/arch/sparc/kernel/traps.c
+++ b/arch/sparc/kernel/traps.c
@@ -1,7 +1,7 @@
 /*
  * arch/sparc/kernel/traps.c
  *
- * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1995, 2008 David S. Miller (davem@davemloft.net)
  * Copyright 2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -11,7 +11,6 @@
 
 #include <linux/sched.h>  /* for jiffies */
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
@@ -33,9 +32,6 @@ struct trap_trace_entry {
 	unsigned long type;
 };
 
-int trap_curbuf = 0;
-struct trap_trace_entry trapbuf[1024];
-
 void syscall_trace_entry(struct pt_regs *regs)
 {
 	printk("%s[%d]: ", current->comm, task_pid_nr(current));
@@ -72,7 +68,7 @@ void sun4d_nmi(struct pt_regs *regs)
 	prom_halt();
 }
 
-void instruction_dump (unsigned long *pc)
+static void instruction_dump(unsigned long *pc)
 {
 	int i;
 	
@@ -119,8 +115,8 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		      count++ < 30				&&
                       (((unsigned long) rw) >= PAGE_OFFSET)	&&
 		      !(((unsigned long) rw) & 0x7)) {
-			printk("Caller[%08lx]", rw->ins[7]);
-			print_symbol(": %s\n", rw->ins[7]);
+			printk("Caller[%08lx]: %pS\n", rw->ins[7],
+			       (void *) rw->ins[7]);
 			rw = (struct reg_window *)rw->ins[6];
 		}
 	}
@@ -479,10 +475,6 @@ void do_BUG(const char *file, int line)
 
 extern void sparc_cpu_startup(void);
 
-int linux_smp_still_initting;
-unsigned int thiscpus_tbr;
-int thiscpus_mid;
-
 void trap_init(void)
 {
 	extern void thread_info_offsets_are_bolixed_pete(void);
diff --git a/arch/sparc/kernel/wof.S b/arch/sparc/kernel/wof.S
index 4bce38dfe3c5..3bbcd8dc9abf 100644
--- a/arch/sparc/kernel/wof.S
+++ b/arch/sparc/kernel/wof.S
@@ -306,7 +306,6 @@ spwin_bad_ustack_from_kernel:
  * As noted above %curptr cannot be touched by this routine at all.
  */
 
-	.globl	spwin_sun4c_stackchk
 spwin_sun4c_stackchk:
 	/* LOCATION: Window to be saved on the stack */
 
diff --git a/arch/sparc/kernel/wuf.S b/arch/sparc/kernel/wuf.S
index 82e5145b0f77..779ff750603d 100644
--- a/arch/sparc/kernel/wuf.S
+++ b/arch/sparc/kernel/wuf.S
@@ -243,7 +243,6 @@ fwin_user_finish_up:
 	 */
 
 	.align	4
-	.globl	sun4c_fwin_stackchk
 sun4c_fwin_stackchk:
 	/* LOCATION: Window 'W' */
 
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index 0a3cd8f6cfe4..3604c2e86709 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -451,7 +451,7 @@ asmlinkage void do_sun4c_fault(struct pt_regs *regs, int text_fault, int write,
 }
 
 /* This always deals with user addresses. */
-inline void force_user_fault(unsigned long address, int write)
+static void force_user_fault(unsigned long address, int write)
 {
 	struct vm_area_struct *vma;
 	struct task_struct *tsk = current;
diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c
index 7794ecb896e3..e103f1bb3777 100644
--- a/arch/sparc/mm/init.c
+++ b/arch/sparc/mm/init.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/vac-ops.h>
@@ -128,7 +129,7 @@ unsigned long calc_highpages(void)
 	return nr;
 }
 
-unsigned long calc_max_low_pfn(void)
+static unsigned long calc_max_low_pfn(void)
 {
 	int i;
 	unsigned long tmp = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
@@ -292,7 +293,7 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
  *
  * We simply copy the 2.4 implementation for now.
  */
-int pgt_cache_water[2] = { 25, 50 };
+static int pgt_cache_water[2] = { 25, 50 };
 
 void check_pgt_cache(void)
 {
@@ -356,8 +357,6 @@ void __init paging_init(void)
 	device_scan();
 }
 
-struct cache_palias *sparc_aliases;
-
 static void __init taint_real_pages(void)
 {
 	int i;
@@ -375,7 +374,7 @@ static void __init taint_real_pages(void)
 	}
 }
 
-void map_high_region(unsigned long start_pfn, unsigned long end_pfn)
+static void map_high_region(unsigned long start_pfn, unsigned long end_pfn)
 {
 	unsigned long tmp;
 
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 23d3291a3e81..ee30462598fc 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -50,7 +50,7 @@
 #include <asm/btfixup.h>
 
 enum mbus_module srmmu_modtype;
-unsigned int hwbug_bitmask;
+static unsigned int hwbug_bitmask;
 int vac_cache_size;
 int vac_line_size;
 
@@ -60,7 +60,7 @@ extern unsigned long last_valid_pfn;
 
 extern unsigned long page_kernel;
 
-pgd_t *srmmu_swapper_pg_dir;
+static pgd_t *srmmu_swapper_pg_dir;
 
 #ifdef CONFIG_SMP
 #define FLUSH_BEGIN(mm)
@@ -83,12 +83,12 @@ BTFIXUPDEF_CALL(void, local_flush_page_for_dma, unsigned long)
 char *srmmu_name;
 
 ctxd_t *srmmu_ctx_table_phys;
-ctxd_t *srmmu_context_table;
+static ctxd_t *srmmu_context_table;
 
 int viking_mxcc_present;
 static DEFINE_SPINLOCK(srmmu_context_spinlock);
 
-int is_hypersparc;
+static int is_hypersparc;
 
 /*
  * In general all page table modifications should use the V8 atomic
@@ -112,11 +112,11 @@ static inline int srmmu_device_memory(unsigned long x)
 	return ((x & 0xF0000000) != 0);
 }
 
-int srmmu_cache_pagetables;
+static int srmmu_cache_pagetables;
 
 /* these will be initialized in srmmu_nocache_calcsize() */
-unsigned long srmmu_nocache_size;
-unsigned long srmmu_nocache_end;
+static unsigned long srmmu_nocache_size;
+static unsigned long srmmu_nocache_end;
 
 /* 1 bit <=> 256 bytes of nocache <=> 64 PTEs */
 #define SRMMU_NOCACHE_BITMAP_SHIFT (PAGE_SHIFT - 4)
@@ -324,7 +324,7 @@ static unsigned long __srmmu_get_nocache(int size, int align)
 	return (SRMMU_NOCACHE_VADDR + (offset << SRMMU_NOCACHE_BITMAP_SHIFT));
 }
 
-unsigned inline long srmmu_get_nocache(int size, int align)
+static unsigned long srmmu_get_nocache(int size, int align)
 {
 	unsigned long tmp;
 
@@ -336,7 +336,7 @@ unsigned inline long srmmu_get_nocache(int size, int align)
 	return tmp;
 }
 
-void srmmu_free_nocache(unsigned long vaddr, int size)
+static void srmmu_free_nocache(unsigned long vaddr, int size)
 {
 	int offset;
 
@@ -369,7 +369,8 @@ void srmmu_free_nocache(unsigned long vaddr, int size)
 	bit_map_clear(&srmmu_nocache_map, offset, size);
 }
 
-void srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned long end);
+static void srmmu_early_allocate_ptable_skeleton(unsigned long start,
+						 unsigned long end);
 
 extern unsigned long probe_memory(void);	/* in fault.c */
 
@@ -377,7 +378,7 @@ extern unsigned long probe_memory(void);	/* in fault.c */
  * Reserve nocache dynamically proportionally to the amount of
  * system RAM. -- Tomas Szepe <szepe@pinerecords.com>, June 2002
  */
-void srmmu_nocache_calcsize(void)
+static void srmmu_nocache_calcsize(void)
 {
 	unsigned long sysmemavail = probe_memory() / 1024;
 	int srmmu_nocache_npages;
@@ -398,7 +399,7 @@ void srmmu_nocache_calcsize(void)
 	srmmu_nocache_end = SRMMU_NOCACHE_VADDR + srmmu_nocache_size;
 }
 
-void __init srmmu_nocache_init(void)
+static void __init srmmu_nocache_init(void)
 {
 	unsigned int bitmap_bits;
 	pgd_t *pgd;
@@ -645,7 +646,7 @@ static void srmmu_unmapiorange(unsigned long virt_addr, unsigned int len)
  * mappings on the kernel stack without any special code as we did
  * need on the sun4c.
  */
-struct thread_info *srmmu_alloc_thread_info(void)
+static struct thread_info *srmmu_alloc_thread_info(void)
 {
 	struct thread_info *ret;
 
@@ -1045,13 +1046,14 @@ extern void hypersparc_setup_blockops(void);
  *       around 8mb mapped for us.
  */
 
-void __init early_pgtable_allocfail(char *type)
+static void __init early_pgtable_allocfail(char *type)
 {
 	prom_printf("inherit_prom_mappings: Cannot alloc kernel %s.\n", type);
 	prom_halt();
 }
 
-void __init srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned long end)
+static void __init srmmu_early_allocate_ptable_skeleton(unsigned long start,
+							unsigned long end)
 {
 	pgd_t *pgdp;
 	pmd_t *pmdp;
@@ -1081,7 +1083,8 @@ void __init srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned l
 	}
 }
 
-void __init srmmu_allocate_ptable_skeleton(unsigned long start, unsigned long end)
+static void __init srmmu_allocate_ptable_skeleton(unsigned long start,
+						  unsigned long end)
 {
 	pgd_t *pgdp;
 	pmd_t *pmdp;
@@ -1116,7 +1119,8 @@ void __init srmmu_allocate_ptable_skeleton(unsigned long start, unsigned long en
  * looking at the prom's page table directly which is what most
  * other OS's do.  Yuck... this is much better.
  */
-void __init srmmu_inherit_prom_mappings(unsigned long start,unsigned long end)
+static void __init srmmu_inherit_prom_mappings(unsigned long start,
+					       unsigned long end)
 {
 	pgd_t *pgdp;
 	pmd_t *pmdp;
@@ -1348,8 +1352,7 @@ void __init srmmu_paging_init(void)
 		zones_size[ZONE_HIGHMEM] = npages;
 		zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-		free_area_init_node(0, &contig_page_data, zones_size,
-				    pfn_base, zholes_size);
+		free_area_init_node(0, zones_size, pfn_base, zholes_size);
 	}
 }
 
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index 2375fe9dc312..d1782f6368be 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2123,8 +2123,7 @@ void __init sun4c_paging_init(void)
 		zones_size[ZONE_HIGHMEM] = npages;
 		zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-		free_area_init_node(0, &contig_page_data, zones_size,
-				    pfn_base, zholes_size);
+		free_area_init_node(0, zones_size, pfn_base, zholes_size);
 	}
 
 	cnt = 0;
diff --git a/arch/sparc/mm/tsunami.S b/arch/sparc/mm/tsunami.S
index db0d6de33a87..4e55e8f76648 100644
--- a/arch/sparc/mm/tsunami.S
+++ b/arch/sparc/mm/tsunami.S
@@ -93,7 +93,6 @@ tsunami_flush_tlb_page_out:
 	ldd	[src + offset + 0x00], t2; \
 	std	t2, [dst + offset + 0x00];
 
-	.globl	tsunami_copy_1page
 tsunami_copy_1page:
 /* NOTE: This routine has to be shorter than 70insns --jj */
 	or	%g0, (PAGE_SIZE >> 8), %g1
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index eb36f3b746b8..7c88263256af 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -11,9 +11,12 @@ config SPARC
 config SPARC64
 	bool
 	default y
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE
 	select HAVE_IDE
 	select HAVE_LMB
 	select HAVE_ARCH_KGDB
+	select USE_GENERIC_SMP_HELPERS if SMP
 
 config GENERIC_TIME
 	bool
@@ -79,6 +82,10 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y
 
+source "init/Kconfig"
+
+menu "Processor type and features"
+
 choice
 	prompt "Kernel page size"
 	default SPARC64_PAGE_SIZE_8KB
@@ -91,19 +98,11 @@ config SPARC64_PAGE_SIZE_8KB
 	  8KB and 64KB work quite well, since SPARC ELF sections
 	  provide for up to 64KB alignment.
 
-	  Therefore, 512KB and 4MB are for expert hackers only.
-
 	  If you don't know what to do, choose 8KB.
 
 config SPARC64_PAGE_SIZE_64KB
 	bool "64KB"
 
-config SPARC64_PAGE_SIZE_512KB
-	bool "512KB"
-
-config SPARC64_PAGE_SIZE_4MB
-	bool "4MB"
-
 endchoice
 
 config SECCOMP
@@ -134,14 +133,10 @@ config HOTPLUG_CPU
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.
 
-source "init/Kconfig"
-
 config GENERIC_HARDIRQS
 	bool
 	default y
 
-menu "General machine setup"
-
 source "kernel/time/Kconfig"
 
 config SMP
@@ -223,11 +218,10 @@ config HUGETLB_PAGE_SIZE_4MB
 	bool "4MB"
 
 config HUGETLB_PAGE_SIZE_512K
-	depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB
 	bool "512K"
 
 config HUGETLB_PAGE_SIZE_64K
-	depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64KB
+	depends on !SPARC64_PAGE_SIZE_64KB
 	bool "64K"
 
 endchoice
diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug
index 6a4d28a4076d..d6d32d178fc8 100644
--- a/arch/sparc64/Kconfig.debug
+++ b/arch/sparc64/Kconfig.debug
@@ -33,7 +33,7 @@ config DEBUG_PAGEALLOC
 
 config MCOUNT
 	bool
-	depends on STACK_DEBUG
+	depends on STACK_DEBUG || FTRACE
 	default y
 
 config FRAME_POINTER
diff --git a/arch/sparc64/Makefile b/arch/sparc64/Makefile
index 4b8f2b084c21..b785a395b12f 100644
--- a/arch/sparc64/Makefile
+++ b/arch/sparc64/Makefile
@@ -9,7 +9,9 @@
 
 CHECKFLAGS	+= -D__sparc__ -D__sparc_v9__ -m64
 
-CPPFLAGS_vmlinux.lds += -Usparc
+# Undefine sparc when processing vmlinux.lds - it is used
+# And teach CPP we are doing 64 bit builds (for this case)
+CPPFLAGS_vmlinux.lds += -m64 -Usparc
 
 LDFLAGS		:= -m elf64_sparc
 
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 76eb832527f2..82cab5cc8070 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Fri May 16 13:36:07 2008
+# Linux kernel version: 2.6.26
+# Fri Jul 18 00:47:07 2008
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -22,18 +22,6 @@ CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_SPARC64_PAGE_SIZE_8KB=y
-# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
-# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
-# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
-CONFIG_SECCOMP=y
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_HOTPLUG_CPU=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -105,6 +93,7 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,6 +110,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -136,11 +126,21 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-CONFIG_GENERIC_HARDIRQS=y
 
 #
-# General machine setup
+# Processor type and features
 #
+CONFIG_SPARC64_PAGE_SIZE_8KB=y
+# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
+CONFIG_SECCOMP=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -342,6 +342,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -366,6 +368,7 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_CDROM_PKTCDVD_WCACHE=y
 CONFIG_ATA_OVER_ETH=m
 CONFIG_SUNVDC=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
@@ -379,6 +382,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -429,8 +433,6 @@ CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -504,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SUNESP is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -529,6 +532,10 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -745,7 +752,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_N2RNG=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -759,38 +767,58 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -856,6 +884,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -985,15 +1014,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SUN_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1010,21 +1031,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 CONFIG_SND_ALI5451=m
@@ -1084,37 +1101,14 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# ALSA Sparc devices
-#
+CONFIG_SND_SPARC=y
 # CONFIG_SND_SUN_AMD7930 is not set
 CONFIG_SND_SUN_CS4231=m
 # CONFIG_SND_SUN_DBRI is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
@@ -1167,6 +1161,7 @@ CONFIG_USB_UHCI_HCD=m
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1226,6 +1221,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1420,6 +1416,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1486,6 +1488,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1527,6 +1533,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile
index ec4f5ebb1ca6..418b5782096e 100644
--- a/arch/sparc64/kernel/Makefile
+++ b/arch/sparc64/kernel/Makefile
@@ -14,6 +14,7 @@ obj-y		:= process.o setup.o cpu.o idprom.o \
 		   power.o sbus.o sparc64_ksyms.o chmc.o \
 		   visemul.o prom.o of_device.o hvapi.o sstate.o mdesc.o
 
+obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
 obj-$(CONFIG_STACKTRACE) += stacktrace.o
 obj-$(CONFIG_PCI)	 += ebus.o pci_common.o \
 			    pci_psycho.o pci_sabre.o pci_schizo.o \
diff --git a/arch/sparc64/kernel/central.c b/arch/sparc64/kernel/central.c
index b61b8dfb09cf..f2e87d0d7e1d 100644
--- a/arch/sparc64/kernel/central.c
+++ b/arch/sparc64/kernel/central.c
@@ -16,8 +16,8 @@
 #include <asm/fhc.h>
 #include <asm/starfire.h>
 
-struct linux_central *central_bus = NULL;
-struct linux_fhc *fhc_list = NULL;
+static struct linux_central *central_bus = NULL;
+static struct linux_fhc *fhc_list = NULL;
 
 #define IS_CENTRAL_FHC(__fhc)	((__fhc) == central_bus->child)
 
@@ -79,9 +79,9 @@ static void adjust_regs(struct linux_prom_registers *regp, int nregs,
 }
 
 /* Apply probed fhc ranges to registers passed, if no ranges return. */
-void apply_fhc_ranges(struct linux_fhc *fhc,
-		      struct linux_prom_registers *regs,
-		      int nregs)
+static void apply_fhc_ranges(struct linux_fhc *fhc,
+			     struct linux_prom_registers *regs,
+			     int nregs)
 {
 	if (fhc->num_fhc_ranges)
 		adjust_regs(regs, nregs, fhc->fhc_ranges,
@@ -89,8 +89,8 @@ void apply_fhc_ranges(struct linux_fhc *fhc,
 }
 
 /* Apply probed central ranges to registers passed, if no ranges return. */
-void apply_central_ranges(struct linux_central *central,
-			  struct linux_prom_registers *regs, int nregs)
+static void apply_central_ranges(struct linux_central *central,
+				 struct linux_prom_registers *regs, int nregs)
 {
 	if (central->num_central_ranges)
 		adjust_regs(regs, nregs, central->central_ranges,
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index edb74f5a1186..d0fa5aa38934 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -159,7 +159,7 @@ static void ds_var_data(struct ds_info *dp,
 			struct ds_cap_state *cp,
 			void *buf, int len);
 
-struct ds_cap_state ds_states_template[] = {
+static struct ds_cap_state ds_states_template[] = {
 	{
 		.service_id	= "md-update",
 		.data		= md_update_data,
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index c49d0388b793..4d58d7ce708d 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -401,7 +401,7 @@ static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_de
 	dev->ofdev.node = dp;
 	dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
 	dev->ofdev.dev.bus = &ebus_bus_type;
-	sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node);
+	dev_set_name(&dev->ofdev.dev, "ebus[%08x]", dp->node);
 
 	/* Register with core */
 	if (of_device_register(&dev->ofdev) != 0)
@@ -501,7 +501,7 @@ void __init ebus_init(void)
 		ebus->ofdev.node = dp;
 		ebus->ofdev.dev.parent = &pdev->dev;
 		ebus->ofdev.dev.bus = &ebus_bus_type;
-		sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus);
+		dev_set_name(&ebus->ofdev.dev, "ebus%d", num_ebus);
 
 		/* Register with core */
 		if (of_device_register(&ebus->ofdev) != 0)
diff --git a/arch/sparc64/kernel/ftrace.c b/arch/sparc64/kernel/ftrace.c
new file mode 100644
index 000000000000..4298d0aee713
--- /dev/null
+++ b/arch/sparc64/kernel/ftrace.c
@@ -0,0 +1,94 @@
+#include <linux/spinlock.h>
+#include <linux/hardirq.h>
+#include <linux/ftrace.h>
+#include <linux/percpu.h>
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include <asm/ftrace.h>
+
+static const u32 ftrace_nop = 0x01000000;
+
+notrace unsigned char *ftrace_nop_replace(void)
+{
+	return (char *)&ftrace_nop;
+}
+
+notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
+{
+	static u32 call;
+	s32 off;
+
+	off = ((s32)addr - (s32)ip);
+	call = 0x40000000 | ((u32)off >> 2);
+
+	return (unsigned char *) &call;
+}
+
+notrace int
+ftrace_modify_code(unsigned long ip, unsigned char *old_code,
+		   unsigned char *new_code)
+{
+	u32 old = *(u32 *)old_code;
+	u32 new = *(u32 *)new_code;
+	u32 replaced;
+	int faulted;
+
+	__asm__ __volatile__(
+	"1:	cas	[%[ip]], %[old], %[new]\n"
+	"	flush	%[ip]\n"
+	"	mov	0, %[faulted]\n"
+	"2:\n"
+	"	.section .fixup,#alloc,#execinstr\n"
+	"	.align	4\n"
+	"3:	sethi	%%hi(2b), %[faulted]\n"
+	"	jmpl	%[faulted] + %%lo(2b), %%g0\n"
+	"	 mov	1, %[faulted]\n"
+	"	.previous\n"
+	"	.section __ex_table,\"a\"\n"
+	"	.align	4\n"
+	"	.word	1b, 3b\n"
+	"	.previous\n"
+	: "=r" (replaced), [faulted] "=r" (faulted)
+	: [new] "0" (new), [old] "r" (old), [ip] "r" (ip)
+	: "memory");
+
+	if (replaced != old && replaced != new)
+		faulted = 2;
+
+	return faulted;
+}
+
+notrace int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned long ip = (unsigned long)(&ftrace_call);
+	unsigned char old[MCOUNT_INSN_SIZE], *new;
+
+	memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(ip, (unsigned long)func);
+	return ftrace_modify_code(ip, old, new);
+}
+
+notrace int ftrace_mcount_set(unsigned long *data)
+{
+	unsigned long ip = (long)(&mcount_call);
+	unsigned long *addr = data;
+	unsigned char old[MCOUNT_INSN_SIZE], *new;
+
+	/*
+	 * Replace the mcount stub with a pointer to the
+	 * ip recorder function.
+	 */
+	memcpy(old, &mcount_call, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(ip, *addr);
+	*addr = ftrace_modify_code(ip, old, new);
+
+	return 0;
+}
+
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	ftrace_mcount_set(data);
+	return 0;
+}
diff --git a/arch/sparc64/kernel/hvapi.c b/arch/sparc64/kernel/hvapi.c
index f34f5d6181ef..691760b5b012 100644
--- a/arch/sparc64/kernel/hvapi.c
+++ b/arch/sparc64/kernel/hvapi.c
@@ -34,8 +34,12 @@ static struct api_info api_table[] = {
 	{ .group = HV_GRP_LDOM,					},
 	{ .group = HV_GRP_SVC_CHAN,	.flags = FLAG_PRE_API	},
 	{ .group = HV_GRP_NCS,		.flags = FLAG_PRE_API	},
+	{ .group = HV_GRP_RNG,					},
 	{ .group = HV_GRP_NIAG_PERF,	.flags = FLAG_PRE_API	},
 	{ .group = HV_GRP_FIRE_PERF,				},
+	{ .group = HV_GRP_N2_CPU,				},
+	{ .group = HV_GRP_NIU,					},
+	{ .group = HV_GRP_VF_CPU,				},
 	{ .group = HV_GRP_DIAG,		.flags = FLAG_PRE_API	},
 };
 
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index f3575a614fa2..53b19c8231a9 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -23,7 +23,7 @@
 #define IO_PAGE_SHIFT			13
 #define IO_PAGE_SIZE			(1UL << IO_PAGE_SHIFT)
 #define IO_PAGE_MASK			(~(IO_PAGE_SIZE-1))
-#define IO_PAGE_ALIGN(addr)		(((addr)+IO_PAGE_SIZE-1)&IO_PAGE_MASK)
+#define IO_PAGE_ALIGN(addr)		ALIGN(addr, IO_PAGE_SIZE)
 
 #define IO_TSB_ENTRIES			(128*1024)
 #define IO_TSB_SIZE			(IO_TSB_ENTRIES * 8)
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index b441a26b73b0..c481673d249c 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -621,8 +621,9 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino)
 unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 {
 	struct irq_handler_data *data;
-	struct ino_bucket *bucket;
 	unsigned long hv_err, cookie;
+	struct ino_bucket *bucket;
+	struct irq_desc *desc;
 	unsigned int virt_irq;
 
 	bucket = kzalloc(sizeof(struct ino_bucket), GFP_ATOMIC);
@@ -643,6 +644,13 @@ unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 	if (unlikely(!data))
 		return 0;
 
+	/* In order to make the LDC channel startup sequence easier,
+	 * especially wrt. locking, we do not let request_irq() enable
+	 * the interrupt.
+	 */
+	desc = irq_desc + virt_irq;
+	desc->status |= IRQ_NOAUTOEN;
+
 	set_irq_chip_data(virt_irq, data);
 
 	/* Catch accidental accesses to these things.  IMAP/ICLR handling
diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index f43b5d755354..201a6e547e4a 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -478,9 +478,9 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	return 0;
 }
 
-/* Called with kretprobe_lock held.  The value stored in the return
- * address register is actually 2 instructions before where the
- * callee will return to.  Sequences usually look something like this
+/* The value stored in the return address register is actually 2
+ * instructions before where the callee will return to.
+ * Sequences usually look something like this
  *
  *		call	some_function	<--- return register points here
  *		 nop			<--- call delay slot
@@ -512,8 +512,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -553,7 +552,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	regs->tnpc = orig_ret_address + 4;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/sparc64/kernel/ldc.c b/arch/sparc64/kernel/ldc.c
index 63969f610284..d68982330f66 100644
--- a/arch/sparc64/kernel/ldc.c
+++ b/arch/sparc64/kernel/ldc.c
@@ -1,6 +1,6 @@
 /* ldc.c: Logical Domain Channel link-layer protocol driver.
  *
- * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2007, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
@@ -23,8 +23,8 @@
 
 #define DRV_MODULE_NAME		"ldc"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.0"
-#define DRV_MODULE_RELDATE	"June 25, 2007"
+#define DRV_MODULE_VERSION	"1.1"
+#define DRV_MODULE_RELDATE	"July 22, 2008"
 
 static char version[] __devinitdata =
 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -1235,13 +1235,9 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 	unsigned long hv_err, flags;
 	int err = -EINVAL;
 
-	spin_lock_irqsave(&lp->lock, flags);
-
-	if (!name)
-		goto out_err;
-
-	if (lp->state != LDC_STATE_INIT)
-		goto out_err;
+	if (!name ||
+	    (lp->state != LDC_STATE_INIT))
+		return -EINVAL;
 
 	snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name);
 	snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name);
@@ -1250,25 +1246,32 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
 			  lp->rx_irq_name, lp);
 	if (err)
-		goto out_err;
+		return err;
 
 	err = request_irq(lp->cfg.tx_irq, ldc_tx,
 			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
 			  lp->tx_irq_name, lp);
-	if (err)
-		goto out_free_rx_irq;
+	if (err) {
+		free_irq(lp->cfg.rx_irq, lp);
+		return err;
+	}
+
 
+	spin_lock_irqsave(&lp->lock, flags);
+
+	enable_irq(lp->cfg.rx_irq);
+	enable_irq(lp->cfg.tx_irq);
 
 	lp->flags |= LDC_FLAG_REGISTERED_IRQS;
 
 	err = -ENODEV;
 	hv_err = sun4v_ldc_tx_qconf(lp->id, 0, 0);
 	if (hv_err)
-		goto out_free_tx_irq;
+		goto out_free_irqs;
 
 	hv_err = sun4v_ldc_tx_qconf(lp->id, lp->tx_ra, lp->tx_num_entries);
 	if (hv_err)
-		goto out_free_tx_irq;
+		goto out_free_irqs;
 
 	hv_err = sun4v_ldc_rx_qconf(lp->id, 0, 0);
 	if (hv_err)
@@ -1304,14 +1307,11 @@ out_unmap_rx:
 out_unmap_tx:
 	sun4v_ldc_tx_qconf(lp->id, 0, 0);
 
-out_free_tx_irq:
+out_free_irqs:
 	lp->flags &= ~LDC_FLAG_REGISTERED_IRQS;
 	free_irq(lp->cfg.tx_irq, lp);
-
-out_free_rx_irq:
 	free_irq(lp->cfg.rx_irq, lp);
 
-out_err:
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	return err;
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index d569f60c24b8..4fd48ab7dda4 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -797,9 +797,9 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 	op->dev.parent = parent;
 	op->dev.bus = &of_platform_bus_type;
 	if (!parent)
-		strcpy(op->dev.bus_id, "root");
+		dev_set_name(&op->dev, "root");
 	else
-		sprintf(op->dev.bus_id, "%08x", dp->node);
+		dev_set_name(&op->dev, "%08x", dp->node);
 
 	if (of_device_register(op)) {
 		printk("%s: Could not register of device.\n",
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index 112b09f16f36..55096195458f 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -408,7 +408,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->class = class >> 8;
 	dev->revision = class & 0xff;
 
-	sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
 		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
 	if (ofpci_verbose)
diff --git a/arch/sparc64/kernel/pci_msi.c b/arch/sparc64/kernel/pci_msi.c
index db5e8fd8f674..60c71e350212 100644
--- a/arch/sparc64/kernel/pci_msi.c
+++ b/arch/sparc64/kernel/pci_msi.c
@@ -120,9 +120,9 @@ static struct irq_chip msi_irq = {
 	/* XXX affinity XXX */
 };
 
-int sparc64_setup_msi_irq(unsigned int *virt_irq_p,
-			  struct pci_dev *pdev,
-			  struct msi_desc *entry)
+static int sparc64_setup_msi_irq(unsigned int *virt_irq_p,
+				 struct pci_dev *pdev,
+				 struct msi_desc *entry)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	const struct sparc64_msiq_ops *ops = pbm->msi_ops;
@@ -179,8 +179,8 @@ out_err:
 	return err;
 }
 
-void sparc64_teardown_msi_irq(unsigned int virt_irq,
-			      struct pci_dev *pdev)
+static void sparc64_teardown_msi_irq(unsigned int virt_irq,
+				     struct pci_dev *pdev)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	const struct sparc64_msiq_ops *ops = pbm->msi_ops;
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index e2bb9790039c..a104c80d319d 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -531,7 +531,7 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
 	/* Nothing to do... */
 }
 
-const struct dma_ops sun4v_dma_ops = {
+static const struct dma_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
 	.map_single			= dma_4v_map_single,
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 2084f81a76e1..8a9cd3e165b9 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -15,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
@@ -97,7 +96,7 @@ void cpu_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while(1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 
 		while (!need_resched() && !cpu_is_offline(cpu))
 			sparc64_yield(cpu);
@@ -211,7 +210,7 @@ static void show_regwindow(struct pt_regs *regs)
 	printk("i4: %016lx i5: %016lx i6: %016lx i7: %016lx\n",
 	       rwk->ins[4], rwk->ins[5], rwk->ins[6], rwk->ins[7]);
 	if (regs->tstate & TSTATE_PRIV)
-		print_symbol("I7: <%s>\n", rwk->ins[7]);
+		printk("I7: <%pS>\n", (void *) rwk->ins[7]);
 }
 
 #ifdef CONFIG_SMP
@@ -232,7 +231,7 @@ void __show_regs(struct pt_regs * regs)
 #endif
 	printk("TSTATE: %016lx TPC: %016lx TNPC: %016lx Y: %08x    %s\n", regs->tstate,
 	       regs->tpc, regs->tnpc, regs->y, print_tainted());
-	print_symbol("TPC: <%s>\n", regs->tpc);
+	printk("TPC: <%pS>\n", (void *) regs->tpc);
 	printk("g0: %016lx g1: %016lx g2: %016lx g3: %016lx\n",
 	       regs->u_regs[0], regs->u_regs[1], regs->u_regs[2],
 	       regs->u_regs[3]);
@@ -245,7 +244,7 @@ void __show_regs(struct pt_regs * regs)
 	printk("o4: %016lx o5: %016lx sp: %016lx ret_pc: %016lx\n",
 	       regs->u_regs[12], regs->u_regs[13], regs->u_regs[14],
 	       regs->u_regs[15]);
-	print_symbol("RPC: <%s>\n", regs->u_regs[15]);
+	printk("RPC: <%pS>\n", (void *) regs->u_regs[15]);
 	show_regwindow(regs);
 #ifdef CONFIG_SMP
 	spin_unlock(&regdump_lock);
@@ -346,9 +345,6 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 {
 	struct thread_info *tp = current_thread_info();
 	struct pt_regs *regs = get_irq_regs();
-#ifdef CONFIG_KALLSYMS
-	char buffer[KSYM_SYMBOL_LEN];
-#endif
 	unsigned long flags;
 	int this_cpu, cpu;
 
@@ -377,17 +373,13 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 		       gp->tstate, gp->tpc, gp->tnpc,
 		       ((tp && tp->task) ? tp->task->comm : "NULL"),
 		       ((tp && tp->task) ? tp->task->pid : -1));
-#ifdef CONFIG_KALLSYMS
+
 		if (gp->tstate & TSTATE_PRIV) {
-			sprint_symbol(buffer, gp->tpc);
-			printk("             TPC[%s] ", buffer);
-			sprint_symbol(buffer, gp->o7);
-			printk("O7[%s] ", buffer);
-			sprint_symbol(buffer, gp->i7);
-			printk("I7[%s]\n", buffer);
-		} else
-#endif
-		{
+			printk("             TPC[%pS] O7[%pS] I7[%pS]\n",
+			       (void *) gp->tpc,
+			       (void *) gp->o7,
+			       (void *) gp->i7);
+		} else {
 			printk("             TPC[%lx] O7[%lx] I7[%lx]\n",
 			       gp->tpc, gp->o7, gp->i7);
 		}
@@ -691,9 +683,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 		  ((unsigned long) child_sf) - STACK_BIAS;
 
 		/* Special case, if we are spawning a kernel thread from
-		 * a userspace task (via KMOD, NFS, or similar) we must
-		 * disable performance counters in the child because the
-		 * address space and protection realm are changing.
+		 * a userspace task (usermode helper, NFS or similar), we
+		 * must disable performance counters in the child because
+		 * the address space and protection realm are changing.
 		 */
 		if (t->flags & _TIF_PERFCTR) {
 			t->user_cntd0 = t->user_cntd1 = NULL;
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index fa63c68a1819..7cf72b4bb108 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -788,92 +788,36 @@ static void smp_start_sync_tick_client(int cpu)
 			      0, 0, 0, mask);
 }
 
-/* Send cross call to all processors except self. */
-#define smp_cross_call(func, ctx, data1, data2) \
-	smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map)
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t finished;
-	int wait;
-};
-
-static struct call_data_struct *call_data;
-
 extern unsigned long xcall_call_function;
 
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: currently unused.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-static int smp_call_function_mask(void (*func)(void *info), void *info,
-				  int nonatomic, int wait, cpumask_t mask)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct call_data_struct data;
-	int cpus;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.finished, 0);
-	data.wait = wait;
-
-	spin_lock(&call_lock);
-
-	cpu_clear(smp_processor_id(), mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		goto out_unlock;
-
-	call_data = &data;
-	mb();
-
 	smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask);
+}
 
-	/* Wait for response */
-	while (atomic_read(&data.finished) != cpus)
-		cpu_relax();
+extern unsigned long xcall_call_function_single;
 
-out_unlock:
-	spin_unlock(&call_lock);
+void arch_send_call_function_single_ipi(int cpu)
+{
+	cpumask_t mask = cpumask_of_cpu(cpu);
 
-	return 0;
+	smp_cross_call_masked(&xcall_call_function_single, 0, 0, 0, mask);
 }
 
-int smp_call_function(void (*func)(void *info), void *info,
-		      int nonatomic, int wait)
-{
-	return smp_call_function_mask(func, info, nonatomic, wait,
-				      cpu_online_map);
-}
+/* Send cross call to all processors except self. */
+#define smp_cross_call(func, ctx, data1, data2) \
+	smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map)
 
 void smp_call_function_client(int irq, struct pt_regs *regs)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
+	clear_softint(1 << irq);
+	generic_smp_call_function_interrupt();
+}
 
+void smp_call_function_single_client(int irq, struct pt_regs *regs)
+{
 	clear_softint(1 << irq);
-	if (call_data->wait) {
-		/* let initiator proceed only after completion */
-		func(info);
-		atomic_inc(&call_data->finished);
-	} else {
-		/* let initiator proceed after getting data */
-		atomic_inc(&call_data->finished);
-		func(info);
-	}
+	generic_smp_call_function_single_interrupt();
 }
 
 static void tsb_sync(void *info)
@@ -893,7 +837,7 @@ static void tsb_sync(void *info)
 
 void smp_tsb_sync(struct mm_struct *mm)
 {
-	smp_call_function_mask(tsb_sync, mm, 0, 1, mm->cpu_vm_mask);
+	smp_call_function_mask(mm->cpu_vm_mask, tsb_sync, mm, 1);
 }
 
 extern unsigned long xcall_flush_tlb_mm;
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 8ac0b99f2c55..504e678ee128 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -53,6 +53,7 @@
 #include <asm/ns87303.h>
 #include <asm/timer.h>
 #include <asm/cpudata.h>
+#include <asm/ftrace.h>
 
 struct poll {
 	int fd;
@@ -107,12 +108,9 @@ EXPORT_SYMBOL(__read_unlock);
 EXPORT_SYMBOL(__write_lock);
 EXPORT_SYMBOL(__write_unlock);
 EXPORT_SYMBOL(__write_trylock);
-
-EXPORT_SYMBOL(smp_call_function);
 #endif /* CONFIG_SMP */
 
-#if defined(CONFIG_MCOUNT)
-extern void _mcount(void);
+#ifdef CONFIG_MCOUNT
 EXPORT_SYMBOL(_mcount);
 #endif
 
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index c73ce3f4197e..b3e3737750d8 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -1,6 +1,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 #include <asm/ptrace.h>
 #include <asm/stacktrace.h>
 
@@ -47,3 +48,4 @@ void save_stack_trace(struct stack_trace *trace)
 			trace->entries[trace->nr_entries++] = pc;
 	} while (trace->nr_entries < trace->max_entries);
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index ac1bff58c1ac..39749e32dc7e 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -418,7 +418,7 @@ asmlinkage long sparc_pipe(struct pt_regs *regs)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error)
 		goto out;
 	regs->u_regs[UREG_I1] = fd[1];
@@ -542,7 +542,7 @@ asmlinkage long sparc64_personality(unsigned long personality)
 	return ret;
 }
 
-int sparc64_mmap_check(unsigned long addr, unsigned long len)
+int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
 	if (test_thread_flag(TIF_32BIT)) {
 		if (len >= STACK_TOP32)
@@ -614,9 +614,9 @@ asmlinkage unsigned long sys64_mremap(unsigned long addr,
 		goto out;
 	if (unlikely(new_len >= VA_EXCLUDE_START))
 		goto out;
-	if (unlikely(sparc64_mmap_check(addr, old_len)))
+	if (unlikely(sparc_mmap_check(addr, old_len)))
 		goto out;
-	if (unlikely(sparc64_mmap_check(new_addr, new_len)))
+	if (unlikely(sparc_mmap_check(new_addr, new_len)))
 		goto out;
 
 	down_write(&current->mm->mmap_sem);
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index ba5bd626b39e..97b77fb5c50e 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -359,7 +359,8 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
 	return err;
 }
 
-int cp_compat_stat64(struct kstat *stat, struct compat_stat64 __user *statbuf)
+static int cp_compat_stat64(struct kstat *stat,
+			    struct compat_stat64 __user *statbuf)
 {
 	int err;
 
@@ -870,9 +871,9 @@ asmlinkage unsigned long sys32_mremap(unsigned long addr,
 	unsigned long ret = -EINVAL;
 	unsigned long new_addr = __new_addr;
 
-	if (unlikely(sparc64_mmap_check(addr, old_len)))
+	if (unlikely(sparc_mmap_check(addr, old_len)))
 		goto out;
-	if (unlikely(sparc64_mmap_check(new_addr, new_len)))
+	if (unlikely(sparc_mmap_check(new_addr, new_len)))
 		goto out;
 	down_write(&current->mm->mmap_sem);
 	ret = do_mremap(addr, old_len, new_len, flags, new_addr);
diff --git a/arch/sparc64/kernel/sysfs.c b/arch/sparc64/kernel/sysfs.c
index e885034a6b73..84e5ce146713 100644
--- a/arch/sparc64/kernel/sysfs.c
+++ b/arch/sparc64/kernel/sysfs.c
@@ -14,7 +14,8 @@
 static DEFINE_PER_CPU(struct hv_mmu_statistics, mmu_stats) __attribute__((aligned(64)));
 
 #define SHOW_MMUSTAT_ULONG(NAME) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+			struct sysdev_attribute *attr, char *buf) \
 { \
 	struct hv_mmu_statistics *p = &per_cpu(mmu_stats, dev->id); \
 	return sprintf(buf, "%lu\n", p->NAME); \
@@ -135,13 +136,16 @@ static unsigned long write_mmustat_enable(unsigned long val)
 	return sun4v_mmustat_conf(ra, &orig_ra);
 }
 
-static ssize_t show_mmustat_enable(struct sys_device *s, char *buf)
+static ssize_t show_mmustat_enable(struct sys_device *s,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long val = run_on_cpu(s->id, read_mmustat_enable, 0);
 	return sprintf(buf, "%lx\n", val);
 }
 
-static ssize_t store_mmustat_enable(struct sys_device *s, const char *buf, size_t count)
+static ssize_t store_mmustat_enable(struct sys_device *s,
+			struct sysdev_attribute *attr, const char *buf,
+			size_t count)
 {
 	unsigned long val, err;
 	int ret = sscanf(buf, "%ld", &val);
@@ -179,14 +183,16 @@ static void unregister_mmu_stats(struct sys_device *s)
 #endif
 
 #define SHOW_CPUDATA_ULONG_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+		struct sysdev_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%lu\n", c->MEMBER); \
 }
 
 #define SHOW_CPUDATA_UINT_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+		struct sysdev_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%u\n", c->MEMBER); \
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 8b5282d433c4..1095bf4c5100 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -81,7 +81,8 @@ sys_call_table32:
 /*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages, compat_sys_mbind, compat_sys_get_mempolicy
 	.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
-	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime
+	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
 
 #endif /* CONFIG_COMPAT */
 
@@ -154,4 +155,5 @@ sys_call_table:
 /*300*/	.word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 	.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-	.word sys_timerfd_settime, sys_timerfd_gettime
+	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index e5d238970c7e..a0c6a97eec6e 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -11,6 +11,7 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/string.h>
@@ -883,6 +884,16 @@ static struct notifier_block sparc64_cpufreq_notifier_block = {
 	.notifier_call	= sparc64_cpufreq_notifier
 };
 
+static int __init register_sparc64_cpufreq_notifier(void)
+{
+
+	cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+	return 0;
+}
+
+core_initcall(register_sparc64_cpufreq_notifier);
+
 #endif /* CONFIG_CPU_FREQ */
 
 static int sparc64_next_event(unsigned long delta,
@@ -1049,11 +1060,6 @@ void __init time_init(void)
 	       sparc64_clockevent.mult, sparc64_clockevent.shift);
 
 	setup_sparc64_timer();
-
-#ifdef CONFIG_CPU_FREQ
-	cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-#endif
 }
 
 unsigned long long sched_clock(void)
@@ -1659,10 +1665,14 @@ static int mini_rtc_ioctl(struct inode *inode, struct file *file,
 
 static int mini_rtc_open(struct inode *inode, struct file *file)
 {
-	if (mini_rtc_status & RTC_IS_OPEN)
+	lock_kernel();
+	if (mini_rtc_status & RTC_IS_OPEN) {
+		unlock_kernel();
 		return -EBUSY;
+	}
 
 	mini_rtc_status |= RTC_IS_OPEN;
+	unlock_kernel();
 
 	return 0;
 }
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 369749262653..bd30ecba5630 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -1,6 +1,6 @@
 /* arch/sparc64/kernel/traps.c
  *
- * Copyright (C) 1995,1997 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -37,9 +36,6 @@
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/head.h>
-#ifdef CONFIG_KMOD
-#include <linux/kmod.h>
-#endif
 #include <asm/prom.h>
 
 #include "entry.h"
@@ -74,7 +70,7 @@ static void dump_tl1_traplog(struct tl1_traplog *p)
 		       i + 1,
 		       p->trapstack[i].tstate, p->trapstack[i].tpc,
 		       p->trapstack[i].tnpc, p->trapstack[i].tt);
-		print_symbol("TRAPLOG: TPC<%s>\n", p->trapstack[i].tpc);
+		printk("TRAPLOG: TPC<%pS>\n", (void *) p->trapstack[i].tpc);
 	}
 }
 
@@ -1081,7 +1077,7 @@ static void cheetah_log_errors(struct pt_regs *regs, struct cheetah_err_info *in
 	       regs->tpc, regs->tnpc, regs->u_regs[UREG_I7], regs->tstate);
 	printk("%s" "ERROR(%d): ",
 	       (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id());
-	print_symbol("TPC<%s>\n", regs->tpc);
+	printk("TPC<%pS>\n", (void *) regs->tpc);
 	printk("%s" "ERROR(%d): M_SYND(%lx),  E_SYND(%lx)%s%s\n",
 	       (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id(),
 	       (afsr & CHAFSR_M_SYNDROME) >> CHAFSR_M_SYNDROME_SHIFT,
@@ -1689,7 +1685,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs)
 		       smp_processor_id(),
 		       (type & 0x1) ? 'I' : 'D',
 		       regs->tpc);
-		print_symbol(KERN_EMERG "TPC<%s>\n", regs->tpc);
+		printk(KERN_EMERG "TPC<%pS>\n", (void *) regs->tpc);
 		panic("Irrecoverable Cheetah+ parity error.");
 	}
 
@@ -1697,7 +1693,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs)
 	       smp_processor_id(),
 	       (type & 0x1) ? 'I' : 'D',
 	       regs->tpc);
-	print_symbol(KERN_WARNING "TPC<%s>\n", regs->tpc);
+	printk(KERN_WARNING "TPC<%pS>\n", (void *) regs->tpc);
 }
 
 struct sun4v_error_entry {
@@ -1904,9 +1900,10 @@ void sun4v_itlb_error_report(struct pt_regs *regs, int tl)
 
 	printk(KERN_EMERG "SUN4V-ITLB: Error at TPC[%lx], tl %d\n",
 	       regs->tpc, tl);
-	print_symbol(KERN_EMERG "SUN4V-ITLB: TPC<%s>\n", regs->tpc);
+	printk(KERN_EMERG "SUN4V-ITLB: TPC<%pS>\n", (void *) regs->tpc);
 	printk(KERN_EMERG "SUN4V-ITLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
-	print_symbol(KERN_EMERG "SUN4V-ITLB: O7<%s>\n", regs->u_regs[UREG_I7]);
+	printk(KERN_EMERG "SUN4V-ITLB: O7<%pS>\n",
+	       (void *) regs->u_regs[UREG_I7]);
 	printk(KERN_EMERG "SUN4V-ITLB: vaddr[%lx] ctx[%lx] "
 	       "pte[%lx] error[%lx]\n",
 	       sun4v_err_itlb_vaddr, sun4v_err_itlb_ctx,
@@ -1927,9 +1924,10 @@ void sun4v_dtlb_error_report(struct pt_regs *regs, int tl)
 
 	printk(KERN_EMERG "SUN4V-DTLB: Error at TPC[%lx], tl %d\n",
 	       regs->tpc, tl);
-	print_symbol(KERN_EMERG "SUN4V-DTLB: TPC<%s>\n", regs->tpc);
+	printk(KERN_EMERG "SUN4V-DTLB: TPC<%pS>\n", (void *) regs->tpc);
 	printk(KERN_EMERG "SUN4V-DTLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
-	print_symbol(KERN_EMERG "SUN4V-DTLB: O7<%s>\n", regs->u_regs[UREG_I7]);
+	printk(KERN_EMERG "SUN4V-DTLB: O7<%pS>\n",
+	       (void *) regs->u_regs[UREG_I7]);
 	printk(KERN_EMERG "SUN4V-DTLB: vaddr[%lx] ctx[%lx] "
 	       "pte[%lx] error[%lx]\n",
 	       sun4v_err_dtlb_vaddr, sun4v_err_dtlb_ctx,
@@ -2111,10 +2109,7 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 	fp = ksp + STACK_BIAS;
 	thread_base = (unsigned long) tp;
 
-	printk("Call Trace:");
-#ifdef CONFIG_KALLSYMS
-	printk("\n");
-#endif
+	printk("Call Trace:\n");
 	do {
 		struct sparc_stackf *sf;
 		struct pt_regs *regs;
@@ -2137,12 +2132,8 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 			fp = (unsigned long)sf->fp + STACK_BIAS;
 		}
 
-		printk(" [%016lx] ", pc);
-		print_symbol("%s\n", pc);
+		printk(" [%016lx] %pS\n", pc, (void *) pc);
 	} while (++count < 16);
-#ifndef CONFIG_KALLSYMS
-	printk("\n");
-#endif
 }
 
 void dump_stack(void)
@@ -2211,9 +2202,8 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		while (rw &&
 		       count++ < 30&&
 		       is_kernel_stack(current, rw)) {
-			printk("Caller[%016lx]", rw->ins[7]);
-			print_symbol(": %s", rw->ins[7]);
-			printk("\n");
+			printk("Caller[%016lx]: %pS\n", rw->ins[7],
+			       (void *) rw->ins[7]);
 
 			rw = kernel_stack_up(rw);
 		}
diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S
index 450053af039e..1ade3d6fb7fc 100644
--- a/arch/sparc64/kernel/ttable.S
+++ b/arch/sparc64/kernel/ttable.S
@@ -58,7 +58,12 @@ tl0_irq3:	BTRAP(0x43)
 tl0_irq4:	BTRAP(0x44)
 #endif
 tl0_irq5:	TRAP_IRQ(handler_irq, 5)
-tl0_irq6:	BTRAP(0x46) BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
+#ifdef CONFIG_SMP
+tl0_irq6:	TRAP_IRQ(smp_call_function_single_client, 6)
+#else
+tl0_irq6:	BTRAP(0x46)
+#endif
+tl0_irq7:	BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
 tl0_irq10:	BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
 tl0_irq14:	TRAP_IRQ(timer_interrupt, 14)
 tl0_irq15:	TRAP_IRQ(handler_irq, 15)
diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c
index afa7fc4f5193..203ddfad9f27 100644
--- a/arch/sparc64/kernel/unaligned.c
+++ b/arch/sparc64/kernel/unaligned.c
@@ -2,7 +2,7 @@
  * unaligned.c: Unaligned load/store trap handling with special
  *              cases for the kernel to do them more quickly.
  *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
  */
 
@@ -20,7 +20,6 @@
 #include <asm/uaccess.h>
 #include <linux/smp.h>
 #include <linux/bitops.h>
-#include <linux/kallsyms.h>
 #include <asm/fpumacro.h>
 
 /* #define DEBUG_MNA */
@@ -289,8 +288,8 @@ static void log_unaligned(struct pt_regs *regs)
 	if (count < 5) {
 		last_time = jiffies;
 		count++;
-		printk("Kernel unaligned access at TPC[%lx] ", regs->tpc);
-		print_symbol("%s\n", regs->tpc);
+		printk("Kernel unaligned access at TPC[%lx] %pS\n",
+		       regs->tpc, (void *) regs->tpc);
 	}
 }
 
diff --git a/arch/sparc64/kernel/vio.c b/arch/sparc64/kernel/vio.c
index e78b3517940b..a490077891a4 100644
--- a/arch/sparc64/kernel/vio.c
+++ b/arch/sparc64/kernel/vio.c
@@ -224,7 +224,7 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	if (!strcmp(type, "domain-services-port"))
 		bus_id_name = "ds";
 
-	if (strlen(bus_id_name) >= KOBJ_NAME_LEN - 4) {
+	if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
 		printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
 		       bus_id_name);
 		return NULL;
@@ -260,16 +260,14 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	vio_fill_channel_info(hp, mp, vdev);
 
 	if (!id) {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s",
-			 bus_id_name);
+		dev_set_name(&vdev->dev, "%s", bus_id_name);
 		vdev->dev_no = ~(u64)0;
 	} else if (!cfg_handle) {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu",
-			 bus_id_name, *id);
+		dev_set_name(&vdev->dev, "%s-%lu", bus_id_name, *id);
 		vdev->dev_no = *id;
 	} else {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu-%lu",
-			 bus_id_name, *cfg_handle, *id);
+		dev_set_name(&vdev->dev, "%s-%lu-%lu", bus_id_name,
+			     *cfg_handle, *id);
 		vdev->dev_no = *cfg_handle;
 	}
 
@@ -292,12 +290,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	}
 	vdev->dp = dp;
 
-	printk(KERN_INFO "VIO: Adding device %s\n", vdev->dev.bus_id);
+	printk(KERN_INFO "VIO: Adding device %s\n", dev_name(&vdev->dev));
 
 	err = device_register(&vdev->dev);
 	if (err) {
 		printk(KERN_ERR "VIO: Could not register device %s, err=%d\n",
-		       vdev->dev.bus_id, err);
+		       dev_name(&vdev->dev), err);
 		kfree(vdev);
 		return NULL;
 	}
@@ -330,7 +328,7 @@ static void vio_remove(struct mdesc_handle *hp, u64 node)
 	dev = device_find_child(&root_vdev->dev, (void *) node,
 				vio_md_node_match);
 	if (dev) {
-		printk(KERN_INFO "VIO: Removing device %s\n", dev->bus_id);
+		printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev));
 
 		device_unregister(dev);
 	}
diff --git a/arch/sparc64/lib/copy_page.S b/arch/sparc64/lib/copy_page.S
index 37460666a5c3..b243d3b606ba 100644
--- a/arch/sparc64/lib/copy_page.S
+++ b/arch/sparc64/lib/copy_page.S
@@ -25,9 +25,9 @@
 
 #define	DCACHE_SIZE	(PAGE_SIZE * 2)
 
-#if (PAGE_SHIFT == 13) || (PAGE_SHIFT == 19)
+#if (PAGE_SHIFT == 13)
 #define PAGE_SIZE_REM	0x80
-#elif (PAGE_SHIFT == 16) || (PAGE_SHIFT == 22)
+#elif (PAGE_SHIFT == 16)
 #define PAGE_SIZE_REM	0x100
 #else
 #error Wrong PAGE_SHIFT specified
@@ -198,7 +198,7 @@ cheetah_copy_page_insn:
 	cmp		%o2, PAGE_SIZE_REM
 	bne,pt		%xcc, 1b
 	 add		%o0, 0x40, %o0
-#if (PAGE_SHIFT == 16) || (PAGE_SHIFT == 22)
+#if (PAGE_SHIFT == 16)
 	TOUCH(f0, f2, f4, f6, f8, f10, f12, f14)
 	ldda		[%o1] ASI_BLK_P, %f32
 	stda		%f48, [%o0] %asi
diff --git a/arch/sparc64/lib/mcount.S b/arch/sparc64/lib/mcount.S
index 9e4534b485c7..7735a7a60533 100644
--- a/arch/sparc64/lib/mcount.S
+++ b/arch/sparc64/lib/mcount.S
@@ -28,10 +28,13 @@ ovstack:
 	.skip		OVSTACKSIZE
 #endif
 	.text
-	.align 32
-	.globl mcount, _mcount
-mcount:
+	.align		32
+	.globl		_mcount
+	.type		_mcount,#function
+	.globl		mcount
+	.type		mcount,#function
 _mcount:
+mcount:
 #ifdef CONFIG_STACK_DEBUG
 	/*
 	 * Check whether %sp is dangerously low.
@@ -55,6 +58,53 @@ _mcount:
 	 or		%g3, %lo(panicstring), %o0
 	call		prom_halt
 	 nop
+1:
+#endif
+#ifdef CONFIG_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE
+	mov		%o7, %o0
+	.globl		mcount_call
+mcount_call:
+	call		ftrace_stub
+	 mov		%o0, %o7
+#else
+	sethi		%hi(ftrace_trace_function), %g1
+	sethi		%hi(ftrace_stub), %g2
+	ldx		[%g1 + %lo(ftrace_trace_function)], %g1
+	or		%g2, %lo(ftrace_stub), %g2
+	cmp		%g1, %g2
+	be,pn		%icc, 1f
+	 mov		%i7, %o1
+	jmpl		%g1, %g0
+	 mov		%o7, %o0
+	/* not reached */
+1:
 #endif
-1:	retl
+#endif
+	retl
 	 nop
+	.size		_mcount,.-_mcount
+	.size		mcount,.-mcount
+
+#ifdef CONFIG_FTRACE
+	.globl		ftrace_stub
+	.type		ftrace_stub,#function
+ftrace_stub:
+	retl
+	 nop
+	.size		ftrace_stub,.-ftrace_stub
+#ifdef CONFIG_DYNAMIC_FTRACE
+	.globl		ftrace_caller
+	.type		ftrace_caller,#function
+ftrace_caller:
+	mov		%i7, %o1
+	mov		%o7, %o0
+	.globl		ftrace_call
+ftrace_call:
+	call		ftrace_stub
+	 mov		%o0, %o7
+	retl
+	 nop
+	.size		ftrace_caller,.-ftrace_caller
+#endif
+#endif
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index 236f4d228d2b..ea7d7ae76bc2 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -1,7 +1,7 @@
 /*
  * arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
  *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
  */
 
@@ -18,7 +18,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kprobes.h>
-#include <linux/kallsyms.h>
 #include <linux/kdebug.h>
 
 #include <asm/page.h>
@@ -115,7 +114,7 @@ static void bad_kernel_pc(struct pt_regs *regs, unsigned long vaddr)
 	printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n",
 	       regs->tpc);
 	printk(KERN_CRIT "OOPS: RPC [%016lx]\n", regs->u_regs[15]);
-	print_symbol("RPC: <%s>\n", regs->u_regs[15]);
+	printk("OOPS: RPC <%pS>\n", (void *) regs->u_regs[15]);
 	printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr);
 	dump_stack();
 	unhandled_fault(regs->tpc, current, regs);
diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c
index 6cfab2e4d340..f27d10369e0c 100644
--- a/arch/sparc64/mm/hugetlbpage.c
+++ b/arch/sparc64/mm/hugetlbpage.c
@@ -175,7 +175,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
@@ -195,7 +195,8 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 				pgoff, flags);
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -294,6 +295,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
@@ -344,7 +350,7 @@ void hugetlb_prefault_arch_hook(struct mm_struct *mm)
 			 * also executing in this address space.
 			 */
 			mm->context.sparc64_ctx_val = ctx;
-			on_each_cpu(context_reload, mm, 0, 0);
+			on_each_cpu(context_reload, mm, 0);
 		}
 		spin_unlock(&ctx_alloc_lock);
 	}
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 84898c44dd4d..4e821b3ecb03 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -392,51 +392,6 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end)
 	}
 }
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages << (PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long i, flags;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk(KERN_INFO "%lu pages of RAM\n", total);
-	printk(KERN_INFO "%lu reserved pages\n", reserved);
-	printk(KERN_INFO "%lu pages shared\n", shared);
-	printk(KERN_INFO "%lu pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n",
-	       global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-	       global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n",
-	       global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-	       global_page_state(NR_PAGETABLE));
-}
-
 void mmu_info(struct seq_file *m)
 {
 	if (tlb_type == cheetah)
@@ -788,7 +743,6 @@ int numa_cpu_lookup_table[NR_CPUS];
 cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 
 struct mdesc_mblock {
 	u64	base;
@@ -871,7 +825,7 @@ static void __init allocate_node_data(int nid)
 	NODE_DATA(nid) = __va(paddr);
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 #endif
 
 	p = NODE_DATA(nid);
diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c
index fe70c8a557b5..3547937b17a2 100644
--- a/arch/sparc64/mm/tsb.c
+++ b/arch/sparc64/mm/tsb.c
@@ -96,12 +96,6 @@ void flush_tsb_user(struct mmu_gather *mp)
 #elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
 #define HV_PGSZ_IDX_BASE	HV_PGSZ_IDX_64K
 #define HV_PGSZ_MASK_BASE	HV_PGSZ_MASK_64K
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB)
-#define HV_PGSZ_IDX_BASE	HV_PGSZ_IDX_512K
-#define HV_PGSZ_MASK_BASE	HV_PGSZ_MASK_512K
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB)
-#define HV_PGSZ_IDX_BASE	HV_PGSZ_IDX_4MB
-#define HV_PGSZ_MASK_BASE	HV_PGSZ_MASK_4MB
 #else
 #error Broken base page size setting...
 #endif
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 9bb2d90a9df6..4c8ca131ffaf 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -688,6 +688,11 @@ xcall_call_function:
 	wr		%g0, (1 << PIL_SMP_CALL_FUNC), %set_softint
 	retry
 
+	.globl		xcall_call_function_single
+xcall_call_function_single:
+	wr		%g0, (1 << PIL_SMP_CALL_FUNC_SNGL), %set_softint
+	retry
+
 	.globl		xcall_receive_signal
 xcall_receive_signal:
 	wr		%g0, (1 << PIL_SMP_RECEIVE_SIGNAL), %set_softint
diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c
index a9ad4bd6d953..d332503fa1be 100644
--- a/arch/um/drivers/harddog_kern.c
+++ b/arch/um/drivers/harddog_kern.c
@@ -66,6 +66,7 @@ static int harddog_open(struct inode *inode, struct file *file)
 	int err = -EBUSY;
 	char *sock = NULL;
 
+	lock_kernel();
 	spin_lock(&lock);
 	if(timer_alive)
 		goto err;
@@ -82,9 +83,11 @@ static int harddog_open(struct inode *inode, struct file *file)
 
 	timer_alive = 1;
 	spin_unlock(&lock);
+	unlock_kernel();
 	return nonseekable_open(inode, file);
 err:
 	spin_unlock(&lock);
+	unlock_kernel();
 	return err;
 }
 
diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c
index 67b2f55a602f..eb240323c40a 100644
--- a/arch/um/drivers/mmapper_kern.c
+++ b/arch/um/drivers/mmapper_kern.c
@@ -16,6 +16,7 @@
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/mm.h>
+#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include "mem_user.h"
 
@@ -77,6 +78,7 @@ out:
 
 static int mmapper_open(struct inode *inode, struct file *file)
 {
+	cycle_kernel_lock();
 	return 0;
 }
 
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index 4949044773ba..6eabb7022a2d 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -7,6 +7,7 @@
  * of the GNU General Public License, incorporated herein by reference.
  */
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
@@ -33,6 +34,8 @@ static DECLARE_WAIT_QUEUE_HEAD(host_read_wait);
 
 static int rng_dev_open (struct inode *inode, struct file *filp)
 {
+	cycle_kernel_lock();
+
 	/* enforce read-only access to this chrdev */
 	if ((filp->f_mode & FMODE_READ) == 0)
 		return -EINVAL;
diff --git a/arch/um/include/init.h b/arch/um/include/init.h
index b00a95741d41..37dd097c16c0 100644
--- a/arch/um/include/init.h
+++ b/arch/um/include/init.h
@@ -45,6 +45,8 @@ typedef void (*exitcall_t)(void);
 # define __section(S) __attribute__ ((__section__(#S)))
 #endif
 
+#if __GNUC__ == 3
+
 #if __GNUC_MINOR__ >= 3
 # define __used			__attribute__((__used__))
 #else
@@ -52,6 +54,12 @@ typedef void (*exitcall_t)(void);
 #endif
 
 #else
+#if __GNUC__ == 4
+# define __used			__attribute__((__used__))
+#endif
+#endif
+
+#else
 #include <linux/compiler.h>
 #endif
 /* These are for everybody (although not all archs will actually
diff --git a/arch/um/include/irq_kern.h b/arch/um/include/irq_kern.h
index 4f775597fd5f..fba3895274f9 100644
--- a/arch/um/include/irq_kern.h
+++ b/arch/um/include/irq_kern.h
@@ -13,8 +13,6 @@ extern int um_request_irq(unsigned int irq, int fd, int type,
 			  irq_handler_t handler,
 			  unsigned long irqflags,  const char * devname,
 			  void *dev_id);
-extern int init_aio_irq(int irq, char *name,
-			irq_handler_t handler);
 
 #endif
 
diff --git a/arch/um/include/irq_user.h b/arch/um/include/irq_user.h
index e60b31873de1..c6c784df2673 100644
--- a/arch/um/include/irq_user.h
+++ b/arch/um/include/irq_user.h
@@ -21,8 +21,6 @@ struct irq_fd {
 enum { IRQ_READ, IRQ_WRITE };
 
 extern void sigio_handler(int sig, struct uml_pt_regs *regs);
-extern int activate_fd(int irq, int fd, int type, void *dev_id);
-extern void free_irq_by_irq_and_dev(unsigned int irq, void *dev_id);
 extern void free_irq_by_fd(int fd);
 extern void reactivate_fd(int fd, int irqnum);
 extern void deactivate_fd(int fd, int irqnum);
diff --git a/arch/um/include/skas/skas.h b/arch/um/include/skas/skas.h
index b073f8a86bd3..64d2c7443306 100644
--- a/arch/um/include/skas/skas.h
+++ b/arch/um/include/skas/skas.h
@@ -16,7 +16,6 @@ extern int user_thread(unsigned long stack, int flags);
 extern void new_thread_handler(void);
 extern void handle_syscall(struct uml_pt_regs *regs);
 extern int new_mm(unsigned long stack);
-extern void get_skas_faultinfo(int pid, struct faultinfo * fi);
 extern long execute_syscall_skas(void *r);
 extern unsigned long current_stub_stack(void);
 
diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h
index 2b6fc8e0f071..45c04999d670 100644
--- a/arch/um/include/um_uaccess.h
+++ b/arch/um/include/um_uaccess.h
@@ -34,7 +34,6 @@ extern int copy_to_user(void __user *to, const void *from, int n);
 
 extern int __do_copy_to_user(void *to, const void *from, int n,
 			     void **fault_addr, jmp_buf **fault_catcher);
-extern void __do_copy(void *to, const void *from, int n);
 
 /*
  * strncpy_from_user: - Copy a NUL terminated string from userspace.
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 91587f8db340..3d7aad09b171 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -102,7 +102,7 @@ void sigio_handler(int sig, struct uml_pt_regs *regs)
 
 static DEFINE_SPINLOCK(irq_lock);
 
-int activate_fd(int irq, int fd, int type, void *dev_id)
+static int activate_fd(int irq, int fd, int type, void *dev_id)
 {
 	struct pollfd *tmp_pfd;
 	struct irq_fd *new_fd, *irq_fd;
@@ -216,7 +216,7 @@ static int same_irq_and_dev(struct irq_fd *irq, void *d)
 	return ((irq->irq == data->irq) && (irq->id == data->dev));
 }
 
-void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
+static void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
 {
 	struct irq_and_dev data = ((struct irq_and_dev) { .irq  = irq,
 							  .dev  = dev });
@@ -403,37 +403,6 @@ void __init init_IRQ(void)
 	}
 }
 
-int init_aio_irq(int irq, char *name, irq_handler_t handler)
-{
-	int fds[2], err;
-
-	err = os_pipe(fds, 1, 1);
-	if (err) {
-		printk(KERN_ERR "init_aio_irq - os_pipe failed, err = %d\n",
-		       -err);
-		goto out;
-	}
-
-	err = um_request_irq(irq, fds[0], IRQ_READ, handler,
-			     IRQF_DISABLED | IRQF_SAMPLE_RANDOM, name,
-			     (void *) (long) fds[0]);
-	if (err) {
-		printk(KERN_ERR "init_aio_irq - : um_request_irq failed, "
-		       "err = %d\n",
-		       err);
-		goto out_close;
-	}
-
-	err = fds[1];
-	goto out;
-
- out_close:
-	os_close_file(fds[0]);
-	os_close_file(fds[1]);
- out:
-	return err;
-}
-
 /*
  * IRQ stack entry and exit:
  *
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index ccc02a616c22..836fc9b94707 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -18,7 +18,6 @@ EXPORT_SYMBOL(get_signals);
 EXPORT_SYMBOL(kernel_thread);
 EXPORT_SYMBOL(sys_waitpid);
 EXPORT_SYMBOL(flush_tlb_range);
-EXPORT_SYMBOL(arch_validate);
 
 EXPORT_SYMBOL(high_physmem);
 EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index b0ee64622ff7..61d7e6138ff5 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -21,7 +21,7 @@
 /* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */
 unsigned long *empty_zero_page = NULL;
 /* allocated in paging_init and unchanged thereafter */
-unsigned long *empty_bad_page = NULL;
+static unsigned long *empty_bad_page = NULL;
 
 /*
  * Initialized during boot, and readonly for initializing page tables
@@ -240,37 +240,6 @@ void __init paging_init(void)
 #endif
 }
 
-struct page *arch_validate(struct page *page, gfp_t mask, int order)
-{
-	unsigned long addr, zero = 0;
-	int i;
-
- again:
-	if (page == NULL)
-		return page;
-	if (PageHighMem(page))
-		return page;
-
-	addr = (unsigned long) page_address(page);
-	for (i = 0; i < (1 << order); i++) {
-		current->thread.fault_addr = (void *) addr;
-		if (__do_copy_to_user((void __user *) addr, &zero,
-				     sizeof(zero),
-				     &current->thread.fault_addr,
-				     &current->thread.fault_catcher)) {
-			if (!(mask & __GFP_WAIT))
-				return NULL;
-			else break;
-		}
-		addr += PAGE_SIZE;
-	}
-
-	if (i == (1 << order))
-		return page;
-	page = alloc_pages(mask, order);
-	goto again;
-}
-
 /*
  * This can't do anything because nothing in the kernel image can be freed
  * since it's not in kernel physical memory.
@@ -295,37 +264,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void show_mem(void)
-{
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int high_mem = 0;
-	struct page *page;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages<<(PAGE_SHIFT-10));
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			high_mem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", high_mem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /* Allocate and free page tables. */
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 9757085a0220..a1a9090254c2 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -185,7 +185,7 @@ unsigned long find_iomem(char *driver, unsigned long *len_out)
 	return 0;
 }
 
-int setup_iomem(void)
+static int setup_iomem(void)
 {
 	struct iomem_region *region = iomem_regions;
 	unsigned long iomem_start = high_physmem + PAGE_SIZE;
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 83603cfbde81..a1c6d07cac3e 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -243,7 +243,7 @@ void default_idle(void)
 		if (need_resched())
 			schedule();
 
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		nsecs = disable_timer();
 		idle_sleep(nsecs);
 		tick_nohz_restart_sched_tick();
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 47b57b497d55..15e8b7c4de13 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -225,7 +225,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
+static void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
 		  int error_code)
 {
 	struct siginfo info;
diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c
index e1062ec36d40..be2d50c3aa95 100644
--- a/arch/um/kernel/smp.c
+++ b/arch/um/kernel/smp.c
@@ -214,8 +214,7 @@ void smp_call_function_slave(int cpu)
 	atomic_inc(&scf_finished);
 }
 
-int smp_call_function(void (*_func)(void *info), void *_info, int nonatomic,
-		      int wait)
+int smp_call_function(void (*_func)(void *info), void *_info, int wait)
 {
 	int cpus = num_online_cpus() - 1;
 	int i;
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index c3e2f369c33c..47f04f4a3464 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -13,14 +13,6 @@
 #include "kern_util.h"
 #include "os.h"
 
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-	return (unsigned long long)jiffies_64 * (NSEC_PER_SEC / HZ);
-}
-
 void timer_handler(int sig, struct uml_pt_regs *regs)
 {
 	unsigned long flags;
diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c
index f0f4b040d7c5..dd33f040c526 100644
--- a/arch/um/kernel/uaccess.c
+++ b/arch/um/kernel/uaccess.c
@@ -12,7 +12,7 @@
 #include <linux/string.h>
 #include "os.h"
 
-void __do_copy(void *to, const void *from, int n)
+static void __do_copy(void *to, const void *from, int n)
 {
 	memcpy(to, from, n);
 }
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index eb8f2e4be192..63d299df152b 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -530,7 +530,7 @@ static void tty_close(int master, int slave)
 		printk(UM_KERN_CONT "No, enabling workaround\n");
 }
 
-void __init check_sigio(void)
+static void __init check_sigio(void)
 {
 	if ((access("/dev/ptmx", R_OK) < 0) &&
 	    (access("/dev/ptyp0", R_OK) < 0)) {
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 5aade6027e40..6ae180703a63 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -126,7 +126,7 @@ void set_sigstack(void *sig_stack, int size)
 		panic("enabling signal stack failed, errno = %d\n", errno);
 }
 
-void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
+static void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
 
 void handle_signal(int sig, struct sigcontext *sc)
 {
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 172ad8f72e12..d6e0a2234b86 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -96,7 +96,7 @@ bad_wait:
 
 extern unsigned long current_stub_stack(void);
 
-void get_skas_faultinfo(int pid, struct faultinfo * fi)
+static void get_skas_faultinfo(int pid, struct faultinfo *fi)
 {
 	int err;
 
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index 106fa8641553..a27defb81884 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -245,7 +245,7 @@ int __init set_umid(char *name)
 /* Changed in make_umid, which is called during early boot */
 static int umid_setup = 0;
 
-int __init make_umid(void)
+static int __init make_umid(void)
 {
 	int fd, err;
 	char tmp[256];
diff --git a/arch/um/sys-i386/bugs.c b/arch/um/sys-i386/bugs.c
index a74442d13762..2c6d0d731c12 100644
--- a/arch/um/sys-i386/bugs.c
+++ b/arch/um/sys-i386/bugs.c
@@ -12,7 +12,7 @@
 #include "sysdep/ptrace.h"
 
 /* Set during early boot */
-int host_has_cmov = 1;
+static int host_has_cmov = 1;
 static jmp_buf cmov_test_return;
 
 static void cmov_sigill_test_handler(int sig)
diff --git a/arch/um/sys-i386/checksum.S b/arch/um/sys-i386/checksum.S
index 62c7e564f22e..f058d2f82e18 100644
--- a/arch/um/sys-i386/checksum.S
+++ b/arch/um/sys-i386/checksum.S
@@ -243,13 +243,12 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst,
 	.previous
 
 .align 4
-.globl csum_partial_copy_generic_i386
-				
+
 #ifndef CONFIG_X86_USE_PPRO_CHECKSUM
 
 #define ARGBASE 16		
 #define FP		12
-		
+
 csum_partial_copy_generic_i386:
 	subl  $4,%esp	
 	pushl %edi
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index a34263e6b08d..a4846a84a7be 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -14,8 +14,8 @@
 
 extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
 
-long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
-		     void **addr, int done)
+static long write_ldt_entry(struct mm_id *mm_idp, int func,
+		     struct user_desc *desc, void **addr, int done)
 {
 	long res;
 
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
deleted file mode 100644
index 4379f43505ef..000000000000
--- a/arch/v850/Kconfig
+++ /dev/null
@@ -1,353 +0,0 @@
-#############################################################################
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-#############################################################################
-
-mainmenu "uClinux/v850 (w/o MMU) Kernel Configuration"
-
-config MMU
-       	bool
-	default n
-config ZONE_DMA
-	bool
-	default y
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-config GENERIC_HWEIGHT
-	bool
-	default y
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config GENERIC_TIME
-	bool
-	default y
-
-config TIME_LOW_RES
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
-# Turn off some random 386 crap that can affect device config
-config ISA
-	bool
-	default n
-config ISAPNP
-	bool
-	default n
-config EISA
-	bool
-	default n
-config MCA
-	bool
-	default n
-
-
-#############################################################################
-#### v850-specific config
-
-# Define the architecture
-config V850
-	bool
-	default y
-	select HAVE_IDE
-
-menu "Processor type and features"
-
-   choice
-	  prompt "Platform"
-	  default GDB
-      config V850E_SIM
-      	     bool "GDB"
-      config RTE_CB_MA1
-      	     bool "RTE-V850E/MA1-CB"
-      config RTE_CB_NB85E
-      	     bool "RTE-V850E/NB85E-CB"
-      config RTE_CB_ME2
-      	     bool "RTE-V850E/ME2-CB"
-      config V850E_AS85EP1
-      	     bool "AS85EP1"
-      config V850E2_SIM85E2C
-      	     bool "sim85e2c"
-      config V850E2_SIM85E2S
-      	     bool "sim85e2s"
-      config V850E2_FPGA85E2C
-      	     bool "NA85E2C-FPGA"
-      config V850E2_ANNA
-      	     bool "Anna"
-   endchoice
-
-   #### V850E processor-specific config
-
-   # All CPUs currently supported use the v850e architecture
-   config V850E
-   	  bool
-	  default y
-
-   # The RTE-V850E/MA1-CB is the only type of V850E/MA1 platform we
-   # currently support
-   config V850E_MA1
-   	  bool
-	  depends on RTE_CB_MA1
-	  default y
-   # Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
-   config V850E_TEG
-   	  bool
-	  depends on RTE_CB_NB85E
-	  default y
-   # ... and the RTE-V850E/ME2-CB - V850E/ME2
-   config V850E_ME2
-   	  bool
-	  depends on RTE_CB_ME2
-	  default y
-
-
-   #### sim85e2-specific config
-
-   config V850E2_SIM85E2
-   	  bool
-	  depends on V850E2_SIM85E2C || V850E2_SIM85E2S
-	  default y
-
-
-   #### V850E2 processor-specific config
-
-   # V850E2 processors
-   config V850E2
-   	  bool
-	  depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
-	  default y
-
-
-   #### RTE-CB platform-specific config
-
-   # Boards in the RTE-x-CB series
-   config RTE_CB
-   	  bool
-	  depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
-	  default y
-
-   config RTE_CB_MULTI
-   	  bool
-	  # RTE_CB_NB85E can either have multi ROM support or not, but
-	  # other platforms (currently only RTE_CB_MA1) require it.
-	  prompt "Multi monitor ROM support" if RTE_CB_NB85E
-	  depends on RTE_CB_MA1 || RTE_CB_NB85E
-	  default y
-
-   config RTE_CB_MULTI_DBTRAP
-   	  bool "Pass illegal insn trap / dbtrap to kernel"
-	  depends on RTE_CB_MULTI
-	  default n
-
-   config RTE_CB_MA1_KSRAM
-   	  bool "Kernel in SRAM (limits size of kernel)"
-	  depends on RTE_CB_MA1 && RTE_CB_MULTI
-	  default n
-
-   config RTE_MB_A_PCI
-   	  bool "Mother-A PCI support"
-	  depends on RTE_CB
-	  default y
-
-   # The GBUS is used to talk to the RTE-MOTHER-A board
-   config RTE_GBUS_INT
-   	  bool
-	  depends on RTE_MB_A_PCI
-	  default y
-
-   # The only PCI bus we support is on the RTE-MOTHER-A board
-   config PCI
-   	  bool
-	  default RTE_MB_A_PCI
-
-   #### Some feature-specific configs
-
-   # Everything except for the GDB simulator uses the same interrupt controller
-   config V850E_INTC
-   	  bool
-	  default !V850E_SIM
-
-   # Everything except for the various simulators uses the "Timer D" unit
-   config V850E_TIMER_D
-   	  bool
-	  default !V850E_SIM && !V850E2_SIM85E2
-
-   # Cache control used on some v850e1 processors
-   config V850E_CACHE
-          bool
-	  default V850E_TEG || V850E_ME2
-
-   # Cache control used on v850e2 processors; I think this should
-   # actually apply to more, but currently only the SIM85E2S uses it
-   config V850E2_CACHE
-   	  bool
-	  default V850E2_SIM85E2S
-
-   config NO_CACHE
-   	  bool
-	  default !V850E_CACHE && !V850E2_CACHE
-
-   # HZ depends on the platform
-   config HZ
-	  int
-	  default 24  if V850E_SIM || V850E2_SIM85E2
-	  default 122 if V850E2_FPGA85E2C
-	  default 100
-
-   #### Misc config
-
-   config ROM_KERNEL
-   	  bool "Kernel in ROM"
-	  depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
-
-   # Some platforms pre-zero memory, in which case the kernel doesn't need to
-   config ZERO_BSS
-   	  bool
-	  depends on !V850E2_SIM85E2C
-	  default y
-
-   # The crappy-ass zone allocator requires that the start of allocatable
-   # memory be aligned to the largest possible allocation.
-   config FORCE_MAX_ZONEORDER
-   	  int
-	  default 8 if V850E2_SIM85E2C || V850E2_FPGA85E2C
-
-   config V850E_HIGHRES_TIMER
-   	  bool "High resolution timer support"
-	  depends on V850E_TIMER_D
-   config TIME_BOOTUP
-   	  bool "Time bootup"
-	  depends on V850E_HIGHRES_TIMER
-
-   config RESET_GUARD
-   	  bool "Reset Guard"
-
-source "mm/Kconfig"
-
-endmenu
-
-
-#############################################################################
-
-source init/Kconfig
-
-#############################################################################
-
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-#    config PCI
-# 	   bool "PCI support"
-# 	   help
-# 	     Support for PCI bus.
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-#############################################################################
-
-source "drivers/base/Kconfig"
-
-source drivers/mtd/Kconfig
-
-source drivers/parport/Kconfig
-
-#source drivers/pnp/Kconfig
-
-source drivers/block/Kconfig
-
-#############################################################################
-
-menu "Disk device support"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-endmenu
-
-#############################################################################
-
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-#source "drivers/telephony/Kconfig"
-
-#
-# input before char - char/joystick depends on it. As does USB.
-#
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-#source drivers/misc/Config.in
-source "drivers/media/Kconfig"
-
-source "fs/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "arch/v850/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-#############################################################################
diff --git a/arch/v850/Kconfig.debug b/arch/v850/Kconfig.debug
deleted file mode 100644
index 4acfb9cca1ca..000000000000
--- a/arch/v850/Kconfig.debug
+++ /dev/null
@@ -1,10 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config NO_KERNEL_MSG
-	bool "Suppress Kernel BUG Messages"
-	help
-	  Do not output any debug BUG messages within the kernel.
-
-endmenu
diff --git a/arch/v850/Makefile b/arch/v850/Makefile
deleted file mode 100644
index 8b629df0029a..000000000000
--- a/arch/v850/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# arch/v850/Makefile
-#
-#  Copyright (C) 2001,02,03,05  NEC Corporation
-#  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-arch_dir = arch/v850
-
-KBUILD_CFLAGS += -mv850e
-# r16 is a fixed pointer to the current task
-KBUILD_CFLAGS += -ffixed-r16 -mno-prolog-function
-KBUILD_CFLAGS += -fno-builtin
-KBUILD_CFLAGS += -D__linux__ -DUTS_SYSNAME=\"uClinux\"
-
-# By default, build a kernel that runs on the gdb v850 simulator.
-KBUILD_DEFCONFIG := sim_defconfig
-
-# This prevents the linker from consolidating the .gnu.linkonce.this_module
-# section into .text (which the v850 default linker script for -r does for
-# some reason)
-LDFLAGS_MODULE += --unique=.gnu.linkonce.this_module
-
-OBJCOPY_FLAGS_BLOB := -I binary -O elf32-little -B v850e
-
-
-head-y := $(arch_dir)/kernel/head.o $(arch_dir)/kernel/init_task.o
-core-y += $(arch_dir)/kernel/
-libs-y += $(arch_dir)/lib/
-
-
-# Deal with the initial contents of the root device
-ifdef ROOT_FS_IMAGE
-core-y += root_fs_image.o
-
-# Because the kernel build-system erases all explicit .o build rules, we
-# have to use an intermediate target to fool it into building for us.
-# This results in it being built anew each time, but that's alright.
-root_fs_image.o: root_fs_image_force
-
-root_fs_image_force: $(ROOT_FS_IMAGE)
-	$(OBJCOPY) $(OBJCOPY_FLAGS_BLOB) --rename-section .data=.root,alloc,load,readonly,data,contents $< root_fs_image.o
-endif
-
-CLEAN_FILES += root_fs_image.o
diff --git a/arch/v850/README b/arch/v850/README
deleted file mode 100644
index 12f7f7a665e0..000000000000
--- a/arch/v850/README
+++ /dev/null
@@ -1,44 +0,0 @@
-This port to the NEC V850E processor supports the following platforms:
-
-   "sim"
-	The gdb v850e simulator (CONFIG_V850E_SIM).
-
-   "rte-ma1-cb"
-	The Midas labs RTE-V850E/MA1-CB and RTE-V850E/NB85E-CB evaluation
-	boards (CONFIG_RTE_CB_MA1 and CONFIG_RTE_CB_NB85E).  This support
-	has only been tested when running with the Multi-debugger monitor
-	ROM (for the Green Hills Multi debugger).  The optional NEC
-	Solution Gear RTE-MOTHER-A motherboard is also supported, which
-	allows PCI boards to be used (CONFIG_RTE_MB_A_PCI).
-
-   "rte-me2-cb"
-	The Midas labs RTE-V850E/ME2-CB evaluation board (CONFIG_RTE_CB_ME2).
-     	This has only been tested using a kernel downloaded via an ICE
-     	connection using the Multi debugger.  Support for the RTE-MOTHER-A is
-     	present, but hasn't been tested (unlike the other Midas labs cpu
-     	boards, the RTE-V850E/ME2-CB includes an ethernet adaptor).
-
-   "as85ep1"
-	The NEC AS85EP1 V850E evaluation chip/board (CONFIG_V850E_AS85EP1).
-
-   "anna"
-	The NEC `Anna' (board/chip) implementation of the V850E2 processor
-	(CONFIG_V850E2_ANNA).
-
-   "sim85e2c", "sim85e2s"
-   	The sim85e2c and sim85e2s simulators, which are verilog simulations
-	of the V850E2 NA85E2C/NA85E2S cpu cores (CONFIG_V850E2_SIM85E2C and
-	CONFIG_V850E2_SIM85E2S).
-
-   "fpga85e2c"
-	A FPGA implementation of the V850E2 NA85E2C cpu core
-	(CONFIG_V850E2_FPGA85E2C).
-
-To get a default kernel configuration for a particular platform, you can
-use a <platform>_defconfig make target (e.g., "make rte-me2-cb_defconfig");
-to see which default configurations are possible, look in the directory
-"arch/v850/configs".
-
-Porting to anything with a V850E/MA1 or MA2 processor should be simple.
-See the file <asm-v850/machdep.h> and the files it includes for an example of
-how to add platform/chip-specific support.
diff --git a/arch/v850/configs/rte-ma1-cb_defconfig b/arch/v850/configs/rte-ma1-cb_defconfig
deleted file mode 100644
index 1a5beda36e29..000000000000
--- a/arch/v850/configs/rte-ma1-cb_defconfig
+++ /dev/null
@@ -1,617 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:54:27 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-CONFIG_RTE_CB_MA1=y
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_MA1=y
-CONFIG_RTE_CB=y
-CONFIG_RTE_CB_MULTI=y
-CONFIG_RTE_CB_MULTI_DBTRAP=y
-# CONFIG_RTE_CB_MA1_KSRAM is not set
-CONFIG_RTE_MB_A_PCI=y
-CONFIG_RTE_GBUS_INT=y
-CONFIG_PCI=y
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NE2000 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_V850E_UART=y
-CONFIG_V850E_UART_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/rte-me2-cb_defconfig b/arch/v850/configs/rte-me2-cb_defconfig
deleted file mode 100644
index 15e666478061..000000000000
--- a/arch/v850/configs/rte-me2-cb_defconfig
+++ /dev/null
@@ -1,462 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:47:50 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-CONFIG_RTE_CB_ME2=y
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_ME2=y
-CONFIG_RTE_CB=y
-# CONFIG_RTE_MB_A_PCI is not set
-# CONFIG_PCI is not set
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-CONFIG_V850E_CACHE=y
-# CONFIG_V850E2_CACHE is not set
-# CONFIG_NO_CACHE is not set
-# CONFIG_ROM_KERNEL is not set
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_V850E_UART is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/sim_defconfig b/arch/v850/configs/sim_defconfig
deleted file mode 100644
index f31ba7398ad0..000000000000
--- a/arch/v850/configs/sim_defconfig
+++ /dev/null
@@ -1,451 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:36:43 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-CONFIG_V850E_SIM=y
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-# CONFIG_PCI is not set
-# CONFIG_V850E_INTC is not set
-# CONFIG_V850E_TIMER_D is not set
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/kernel/Makefile b/arch/v850/kernel/Makefile
deleted file mode 100644
index da5889c53576..000000000000
--- a/arch/v850/kernel/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# arch/v850/kernel/Makefile
-#
-#  Copyright (C) 2001,02,03  NEC Electronics Corporation
-#  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-extra-y := head.o init_task.o vmlinux.lds
-
-obj-y += intv.o entry.o process.o syscalls.o time.o setup.o \
-	 signal.o irq.o mach.o ptrace.o bug.o
-obj-$(CONFIG_MODULES)		+= module.o v850_ksyms.o
-# chip-specific code
-obj-$(CONFIG_V850E_MA1)		+= ma.o
-obj-$(CONFIG_V850E_ME2)		+= me2.o
-obj-$(CONFIG_V850E_TEG)		+= teg.o
-obj-$(CONFIG_V850E_AS85EP1)	+= as85ep1.o
-obj-$(CONFIG_V850E2_ANNA)	+= anna.o
-# platform-specific code
-obj-$(CONFIG_V850E_SIM)		+= sim.o simcons.o
-obj-$(CONFIG_V850E2_SIM85E2)	+= sim85e2.o memcons.o
-obj-$(CONFIG_V850E2_FPGA85E2C)	+= fpga85e2c.o memcons.o
-obj-$(CONFIG_RTE_CB)		+= rte_cb.o rte_cb_leds.o
-obj-$(CONFIG_RTE_CB_MA1)	+= rte_ma1_cb.o
-obj-$(CONFIG_RTE_CB_ME2)	+= rte_me2_cb.o
-obj-$(CONFIG_RTE_CB_NB85E)	+= rte_nb85e_cb.o
-obj-$(CONFIG_RTE_CB_MULTI)	+= rte_cb_multi.o
-obj-$(CONFIG_RTE_MB_A_PCI)	+= rte_mb_a_pci.o
-obj-$(CONFIG_RTE_GBUS_INT)	+= gbus_int.o
-# feature-specific code
-obj-$(CONFIG_V850E_INTC)	+= v850e_intc.o
-obj-$(CONFIG_V850E_TIMER_D)	+= v850e_timer_d.o v850e_utils.o
-obj-$(CONFIG_V850E_CACHE)	+= v850e_cache.o
-obj-$(CONFIG_V850E2_CACHE)	+= v850e2_cache.o
-obj-$(CONFIG_V850E_HIGHRES_TIMER) += highres_timer.o
-obj-$(CONFIG_PROC_FS)		+= procfs.o
diff --git a/arch/v850/kernel/anna-rom.ld b/arch/v850/kernel/anna-rom.ld
deleted file mode 100644
index 7c54e7e3f1b1..000000000000
--- a/arch/v850/kernel/anna-rom.ld
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 8MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00800000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c
deleted file mode 100644
index 5978a25170fb..000000000000
--- a/arch/v850/kernel/anna.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/v850/kernel/anna.c -- Anna V850E2 evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	0
-
-
-static void anna_led_tick (void);
-
-
-void __init mach_early_init (void)
-{
-	ANNA_ILBEN    = 0;
-
-	V850E2_CSC(0) = 0x402F;
-	V850E2_CSC(1) = 0x4000;
-	V850E2_BPC    = 0;
-	V850E2_BSC    = 0xAAAA;
-	V850E2_BEC    = 0;
-
-#if 0
-	V850E2_BHC    = 0xFFFF;	/* icache all memory, dcache all */
-#else
-	V850E2_BHC    = 0;	/* cache no memory */
-#endif
-	V850E2_BCT(0) = 0xB088;
-	V850E2_BCT(1) = 0x0008;
-	V850E2_DWC(0) = 0x0027;
-	V850E2_DWC(1) = 0;
-	V850E2_BCC    = 0x0006;
-	V850E2_ASC    = 0;
-	V850E2_LBS    = 0x0089;
-	V850E2_SCR(3) = 0x21A9;
-	V850E2_RFS(3) = 0x8121;
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	ANNA_PORT_PM (LEDS_PORT) = 0;	/* Make all LED pins output pins.  */
-	mach_tick = anna_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-	/* The space between SRAM and SDRAM is filled with duplicate
-	   images of SRAM.  Prevent the kernel from using them.  */
-	reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-			 SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-			 BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "PIN", IRQ_INTP(0),   IRQ_INTP_NUM,   1, 4 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM,	1, 2 },
-	{ "DMXER", IRQ_INTDMXER,1,		1, 2 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	ANNA_PORT_IO(LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* The Anna connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P07
-	   and P37 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		ANNA_PORT_PM(0) &= ~0x80; /* P07 in output mode */
-		ANNA_PORT_PM(3) |=  0x80; /* P37 in input mode */
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  We can't use the last bit because it's used for
-   UART0's CTS output.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 6
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void anna_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				clear_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-				pos += dir;
-				set_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/anna.ld b/arch/v850/kernel/anna.ld
deleted file mode 100644
index df7f80f2833d..000000000000
--- a/arch/v850/kernel/anna.ld
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA).  */
-
-MEMORY {
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00040000
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM1 : ORIGIN = 0x00040000, LENGTH = 0x00040000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > iMEM0
-	.sram : { RAMK_KRAM_CONTENTS } > SRAM
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/as85ep1-rom.ld b/arch/v850/kernel/as85ep1-rom.ld
deleted file mode 100644
index fe2a9a3ab525..000000000000
--- a/arch/v850/kernel/as85ep1-rom.ld
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 4MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00400000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jumper JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c
deleted file mode 100644
index b525ecf3aea4..000000000000
--- a/arch/v850/kernel/as85ep1.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * arch/v850/kernel/as85ep1.c -- AS85EP1 V850E evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	4
-
-
-static void as85ep1_led_tick (void);
-
-extern char _intv_copy_src_start, _intv_copy_src_end;
-extern char _intv_copy_dst_start;
-
-
-void __init mach_early_init (void)
-{
-#ifndef CONFIG_ROM_KERNEL
-	const u32 *src;
-	register u32 *dst asm ("ep");
-#endif
-
-	AS85EP1_CSC(0) = 0x0403;
-	AS85EP1_BCT(0) = 0xB8B8;
-	AS85EP1_DWC(0) = 0x0104;
-	AS85EP1_BCC    = 0x0012;
-	AS85EP1_ASC    = 0;
-	AS85EP1_LBS    = 0x00A9;
-
-	AS85EP1_PORT_PMC(6)  = 0xFF; /* valid A0,A1,A20-A25 */
-	AS85EP1_PORT_PMC(7)  = 0x0E; /* valid CS1-CS3       */
-	AS85EP1_PORT_PMC(9)  = 0xFF; /* valid D16-D23       */
-	AS85EP1_PORT_PMC(10) = 0xFF; /* valid D24-D31       */
-
-	AS85EP1_RFS(1) = 0x800c;
-	AS85EP1_RFS(3) = 0x800c;
-	AS85EP1_SCR(1) = 0x20A9;
-	AS85EP1_SCR(3) = 0x20A9;
-
-#ifndef CONFIG_ROM_KERNEL
-	/* The early chip we have is buggy, and writing the interrupt
-	   vectors into low RAM may screw up, so for non-ROM kernels, we
-	   only rely on the reset vector being downloaded, and copy the
-	   rest of the interrupt vectors into place here.  The specific bug
-	   is that writing address N, where (N & 0x10) == 0x10, will _also_
-	   write to address (N - 0x10).  We avoid this (effectively) by
-	   writing in 16-byte chunks backwards from the end.  */
-
-	AS85EP1_IRAMM = 0x3;	/* "write-mode" for the internal instruction memory */
-
-	src = (u32 *)(((u32)&_intv_copy_src_end - 1) & ~0xF);
-	dst = (u32 *)&_intv_copy_dst_start
-		+ (src - (u32 *)&_intv_copy_src_start);
-	do {
-		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-		dst -= 4;
-		src -= 4;
-	} while (src > (u32 *)&_intv_copy_src_start);
-
-	AS85EP1_IRAMM = 0x0;	/* "read-mode" for the internal instruction memory */
-#endif /* !CONFIG_ROM_KERNEL */
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	AS85EP1_PORT_PMC (LEDS_PORT) = 0; /* Make the LEDs port an I/O port. */
-	AS85EP1_PORT_PM (LEDS_PORT) = 0; /* Make all the bits output pins.  */
-	mach_tick = as85ep1_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-/* Convenience macros.  */
-#define SRAM_END	(SRAM_ADDR + SRAM_SIZE)
-#define SDRAM_END	(SDRAM_ADDR + SDRAM_SIZE)
-
-void __init mach_reserve_bootmem ()
-{
-	if (SDRAM_ADDR < RAM_END && SDRAM_ADDR > RAM_START)
-		/* We can't use the space between SRAM and SDRAM, so
-		   prevent the kernel from trying.  */
-		reserve_bootmem(SRAM_END, SDRAM_ADDR - SRAM_END,
-				BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	AS85EP1_PORT_IO (LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* Make the shared uart/port pins be uart pins.  */
-	AS85EP1_PORT_PMC(3) |= (0x5 << chan);
-
-	/* The AS85EP1 connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P53
-	   and P54 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		/* Put P53 & P54 in I/O port mode.  */
-		AS85EP1_PORT_PMC(5) &= ~0x18;
-		/* Make P53 an output, and P54 an input.  */
-		AS85EP1_PORT_PM(5) |=  0x10;
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 7
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void as85ep1_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				set_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-				pos += dir;
-				clear_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/as85ep1.ld b/arch/v850/kernel/as85ep1.ld
deleted file mode 100644
index ef2c4399063e..000000000000
--- a/arch/v850/kernel/as85ep1.ld
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1).  */
-
-MEMORY {
-	/* 1MB of internal instruction memory. */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00100000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jump JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.resetv : {
-		__intv_start = . ;
-			*(.intv.reset)	/* Reset vector */
-	} > iMEM0
-
-	.sram : {
-		RAMK_KRAM_CONTENTS
-
-		/* We stick most of the interrupt vectors here; they'll be
-		   copied into the proper location by the early init code (we
-		   can't put them directly in the right place because of
-		   hardware bugs).  The vectors shouldn't need to be
-		   relocated, so we don't have to use `> ...  AT> ...' to
-		   split the load/vm addresses (and we can't because of
-		   problems with the loader).  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_start = . ;
-			*(.intv.common)	/* Vectors common to all v850e proc. */
-			*(.intv.mach)	/* Machine-specific int. vectors.  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_end = . ;
-	} > SRAM
-
-	/* Where we end up putting the vectors.  */
-	__intv_copy_dst_start = 0x10 ;
-	__intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
-	__intv_end = __intv_copy_dst_end ;
-
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/asm-offsets.c b/arch/v850/kernel/asm-offsets.c
deleted file mode 100644
index 581e6986a776..000000000000
--- a/arch/v850/kernel/asm-offsets.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/kbuild.h>
-
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-int main (void)
-{
-	/* offsets into the task struct */
-	DEFINE (TASK_STATE, offsetof (struct task_struct, state));
-	DEFINE (TASK_FLAGS, offsetof (struct task_struct, flags));
-	DEFINE (TASK_PTRACE, offsetof (struct task_struct, ptrace));
-	DEFINE (TASK_BLOCKED, offsetof (struct task_struct, blocked));
-	DEFINE (TASK_THREAD, offsetof (struct task_struct, thread));
-	DEFINE (TASK_THREAD_INFO, offsetof (struct task_struct, stack));
-	DEFINE (TASK_MM, offsetof (struct task_struct, mm));
-	DEFINE (TASK_ACTIVE_MM, offsetof (struct task_struct, active_mm));
-	DEFINE (TASK_PID, offsetof (struct task_struct, pid));
-
-	/* offsets into the kernel_stat struct */
-	DEFINE (STAT_IRQ, offsetof (struct kernel_stat, irqs));
-
-
-	/* signal defines */
-	DEFINE (SIGSEGV, SIGSEGV);
-	DEFINE (SEGV_MAPERR, SEGV_MAPERR);
-	DEFINE (SIGTRAP, SIGTRAP);
-	DEFINE (SIGCHLD, SIGCHLD);
-	DEFINE (SIGILL, SIGILL);
-	DEFINE (TRAP_TRACE, TRAP_TRACE);
-
-	/* ptrace flag bits */
-	DEFINE (PT_PTRACED, PT_PTRACED);
-	DEFINE (PT_DTRACE, PT_DTRACE);
-
-	/* error values */
-	DEFINE (ENOSYS, ENOSYS);
-
-	/* clone flag bits */
-	DEFINE (CLONE_VFORK, CLONE_VFORK);
-	DEFINE (CLONE_VM, CLONE_VM);
-
-	return 0;
-}
diff --git a/arch/v850/kernel/bug.c b/arch/v850/kernel/bug.c
deleted file mode 100644
index c78cf750915a..000000000000
--- a/arch/v850/kernel/bug.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * arch/v850/kernel/bug.c -- Bug reporting functions
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/current.h>
-
-/* We should use __builtin_return_address, but it doesn't work in gcc-2.90
-   (which is currently our standard compiler on the v850).  */
-#define ret_addr() ({ register u32 lp asm ("lp"); lp; })
-#define stack_addr() ({ register u32 sp asm ("sp"); sp; })
-
-void __bug ()
-{
-	printk (KERN_CRIT "kernel BUG at PC 0x%x (SP ~0x%x)!\n",
-		ret_addr() - 4, /* - 4 for `jarl' */
-		stack_addr());
-	machine_halt ();
-}
-
-int bad_trap (int trap_num, struct pt_regs *regs)
-{
-	printk (KERN_CRIT
-		"unimplemented trap %d called at 0x%08lx, pid %d!\n",
-		trap_num, regs->pc, current->pid);
-	return -ENOSYS;
-}
-
-#ifdef CONFIG_RESET_GUARD
-void unexpected_reset (unsigned long ret_addr, unsigned long kmode,
-		       struct task_struct *task, unsigned long sp)
-{
-	printk (KERN_CRIT
-		"unexpected reset in %s mode, pid %d"
-		" (ret_addr = 0x%lx, sp = 0x%lx)\n",
-		kmode ? "kernel" : "user",
-		task ? task->pid : -1,
-		ret_addr, sp);
-
-	machine_halt ();
-}
-#endif /* CONFIG_RESET_GUARD */
-
-
-
-struct spec_reg_name {
-	const char *name;
-	int gpr;
-};
-
-struct spec_reg_name spec_reg_names[] = {
-	{ "sp", GPR_SP },
-	{ "gp", GPR_GP },
-	{ "tp", GPR_TP },
-	{ "ep", GPR_EP },
-	{ "lp", GPR_LP },
-	{ 0, 0 }
-};
-
-void show_regs (struct pt_regs *regs)
-{
-	int gpr_base, gpr_offs;
-
-	printk ("     pc 0x%08lx    psw 0x%08lx                       kernel_mode %d\n",
-		regs->pc, regs->psw, regs->kernel_mode);
-	printk ("   ctpc 0x%08lx  ctpsw 0x%08lx   ctbp 0x%08lx\n",
-		regs->ctpc, regs->ctpsw, regs->ctbp);
-
-	for (gpr_base = 0; gpr_base < NUM_GPRS; gpr_base += 4) {
-		for (gpr_offs = 0; gpr_offs < 4; gpr_offs++) {
-			int gpr = gpr_base + gpr_offs;
-			long val = regs->gpr[gpr];
-			struct spec_reg_name *srn;
-
-			for (srn = spec_reg_names; srn->name; srn++)
-				if (srn->gpr == gpr)
-					break;
-
-			if (srn->name)
-				printk ("%7s 0x%08lx", srn->name, val);
-			else
-				printk ("    r%02d 0x%08lx", gpr, val);
-		}
-
-		printk ("\n");
-	}
-}
-
-/*
- * TASK is a pointer to the task whose backtrace we want to see (or NULL
- * for current task), SP is the stack pointer of the first frame that
- * should be shown in the back trace (or NULL if the entire call-chain of
- * the task should be shown).
- */
-void show_stack (struct task_struct *task, unsigned long *sp)
-{
-	unsigned long addr, end;
-
-	if (sp)
-		addr = (unsigned long)sp;
-	else if (task)
-		addr = task_sp (task);
-	else
-		addr = stack_addr ();
-
-	addr = addr & ~3;
-	end = (addr + THREAD_SIZE - 1) & THREAD_MASK;
-
-	while (addr < end) {
-		printk ("%8lX: ", addr);
-		while (addr < end) {
-			printk (" %8lX", *(unsigned long *)addr);
-			addr += sizeof (unsigned long);
-			if (! (addr & 0xF))
-				break;
-		}
-		printk ("\n");
-	}
-}
-
-void dump_stack ()
-{
-	show_stack (0, 0);
-}
-
-EXPORT_SYMBOL(dump_stack);
diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S
deleted file mode 100644
index e4327a8d6bcd..000000000000
--- a/arch/v850/kernel/entry.S
+++ /dev/null
@@ -1,1121 +0,0 @@
-/*
- * arch/v850/kernel/entry.S -- Low-level system-call handling, trap handlers,
- *	and context-switching
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/sys.h>
-
-#include <asm/entry.h>
-#include <asm/current.h>
-#include <asm/thread_info.h>
-#include <asm/clinkage.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-#include <asm/asm-offsets.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM	C_SYMBOL_NAME
-
-
-/* The offset of the struct pt_regs in a state-save-frame on the stack.  */
-#define PTO	STATE_SAVE_PT_OFFSET
-
-
-/* Save argument registers to the state-save-frame pointed to by EP.  */
-#define SAVE_ARG_REGS							      \
-	sst.w	r6, PTO+PT_GPR(6)[ep];					      \
-	sst.w	r7, PTO+PT_GPR(7)[ep];					      \
-	sst.w	r8, PTO+PT_GPR(8)[ep];					      \
-	sst.w	r9, PTO+PT_GPR(9)[ep]
-/* Restore argument registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_ARG_REGS						      \
-	sld.w	PTO+PT_GPR(6)[ep], r6;					      \
-	sld.w	PTO+PT_GPR(7)[ep], r7;					      \
-	sld.w	PTO+PT_GPR(8)[ep], r8;					      \
-	sld.w	PTO+PT_GPR(9)[ep], r9
-
-/* Save value return registers to the state-save-frame pointed to by EP.  */
-#define SAVE_RVAL_REGS							      \
-	sst.w	r10, PTO+PT_GPR(10)[ep];				      \
-	sst.w	r11, PTO+PT_GPR(11)[ep]
-/* Restore value return registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_RVAL_REGS						      \
-	sld.w	PTO+PT_GPR(10)[ep], r10;				      \
-	sld.w	PTO+PT_GPR(11)[ep], r11
-
-
-#define SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS				      \
-	sst.w	r1, PTO+PT_GPR(1)[ep];					      \
-	sst.w	r5, PTO+PT_GPR(5)[ep]
-#define SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL				      \
-	sst.w	r12, PTO+PT_GPR(12)[ep];				      \
-	sst.w	r13, PTO+PT_GPR(13)[ep];				      \
-	sst.w	r14, PTO+PT_GPR(14)[ep];				      \
-	sst.w	r15, PTO+PT_GPR(15)[ep];				      \
-	sst.w	r16, PTO+PT_GPR(16)[ep];				      \
-	sst.w	r17, PTO+PT_GPR(17)[ep];				      \
-	sst.w	r18, PTO+PT_GPR(18)[ep];				      \
-	sst.w	r19, PTO+PT_GPR(19)[ep]
-#define RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS				      \
-	sld.w	PTO+PT_GPR(1)[ep], r1;					      \
-	sld.w	PTO+PT_GPR(5)[ep], r5
-#define RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL				      \
-	sld.w	PTO+PT_GPR(12)[ep], r12;				      \
-	sld.w	PTO+PT_GPR(13)[ep], r13;				      \
-	sld.w	PTO+PT_GPR(14)[ep], r14;				      \
-	sld.w	PTO+PT_GPR(15)[ep], r15;				      \
-	sld.w	PTO+PT_GPR(16)[ep], r16;				      \
-	sld.w	PTO+PT_GPR(17)[ep], r17;				      \
-	sld.w	PTO+PT_GPR(18)[ep], r18;				      \
-	sld.w	PTO+PT_GPR(19)[ep], r19
-
-/* Save `call clobbered' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS					      \
-	SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;				      \
-	SAVE_ARG_REGS;							      \
-	SAVE_RVAL_REGS;							      \
-	SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers from the state-save-frame pointed to
-   by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS					      \
-	RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;			      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_RVAL_REGS;						      \
-	RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call clobbered' registers except for the return-value registers
-   to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS_NO_RVAL				      \
-	SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;				      \
-	SAVE_ARG_REGS;							      \
-	SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers except for the return-value registers
-   from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS_NO_RVAL				      \
-	RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;			      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call saved' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_SAVED_REGS						      \
-	sst.w	r2, PTO+PT_GPR(2)[ep];					      \
-	sst.w	r20, PTO+PT_GPR(20)[ep];				      \
-	sst.w	r21, PTO+PT_GPR(21)[ep];				      \
-	sst.w	r22, PTO+PT_GPR(22)[ep];				      \
-	sst.w	r23, PTO+PT_GPR(23)[ep];				      \
-	sst.w	r24, PTO+PT_GPR(24)[ep];				      \
-	sst.w	r25, PTO+PT_GPR(25)[ep];				      \
-	sst.w	r26, PTO+PT_GPR(26)[ep];				      \
-	sst.w	r27, PTO+PT_GPR(27)[ep];				      \
-	sst.w	r28, PTO+PT_GPR(28)[ep];				      \
-	sst.w	r29, PTO+PT_GPR(29)[ep]
-/* Restore `call saved' registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_SAVED_REGS						      \
-	sld.w	PTO+PT_GPR(2)[ep], r2;					      \
-	sld.w	PTO+PT_GPR(20)[ep], r20;				      \
-	sld.w	PTO+PT_GPR(21)[ep], r21;				      \
-	sld.w	PTO+PT_GPR(22)[ep], r22;				      \
-	sld.w	PTO+PT_GPR(23)[ep], r23;				      \
-	sld.w	PTO+PT_GPR(24)[ep], r24;				      \
-	sld.w	PTO+PT_GPR(25)[ep], r25;				      \
-	sld.w	PTO+PT_GPR(26)[ep], r26;				      \
-	sld.w	PTO+PT_GPR(27)[ep], r27;				      \
-	sld.w	PTO+PT_GPR(28)[ep], r28;				      \
-	sld.w	PTO+PT_GPR(29)[ep], r29
-
-
-/* Save the PC stored in the special register SAVEREG to the state-save-frame
-   pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PC(savereg)						      \
-	stsr	SR_ ## savereg, r19;					      \
-	sst.w	r19, PTO+PT_PC[ep]
-/* Restore the PC from the state-save-frame pointed to by EP, to the special
-   register SAVEREG.  LP is clobbered (it is used as a scratch register
-   because the POP_STATE macro restores it, and this macro is usually used
-   inside POP_STATE).  */
-#define RESTORE_PC(savereg)						      \
-	sld.w	PTO+PT_PC[ep], lp;					      \
-	ldsr	lp, SR_ ## savereg
-/* Save the PSW register stored in the special register SAVREG to the
-   state-save-frame pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PSW(savereg)						      \
-	stsr	SR_ ## savereg, r19;					      \
-	sst.w	r19, PTO+PT_PSW[ep]
-/* Restore the PSW register from the state-save-frame pointed to by EP, to
-   the special register SAVEREG.  LP is clobbered (it is used as a scratch
-   register because the POP_STATE macro restores it, and this macro is
-   usually used inside POP_STATE).  */
-#define RESTORE_PSW(savereg)						      \
-	sld.w	PTO+PT_PSW[ep], lp;					      \
-	ldsr	lp, SR_ ## savereg
-
-/* Save CTPC/CTPSW/CTBP registers to the state-save-frame pointed to by REG.
-   r19 is clobbered.  */
-#define SAVE_CT_REGS							      \
-	stsr	SR_CTPC, r19;						      \
-	sst.w	r19, PTO+PT_CTPC[ep];					      \
-	stsr	SR_CTPSW, r19;						      \
-	sst.w	r19, PTO+PT_CTPSW[ep];					      \
-	stsr	SR_CTBP, r19;						      \
-	sst.w	r19, PTO+PT_CTBP[ep]
-/* Restore CTPC/CTPSW/CTBP registers from the state-save-frame pointed to by EP.
-   LP is clobbered (it is used as a scratch register because the POP_STATE
-   macro restores it, and this macro is usually used inside POP_STATE).  */
-#define RESTORE_CT_REGS							      \
-	sld.w	PTO+PT_CTPC[ep], lp;					      \
-	ldsr	lp, SR_CTPC;						      \
-	sld.w	PTO+PT_CTPSW[ep], lp;					      \
-	ldsr	lp, SR_CTPSW;						      \
-	sld.w	PTO+PT_CTBP[ep], lp;					      \
-	ldsr	lp, SR_CTBP
-
-
-/* Push register state, except for the stack pointer, on the stack in the
-   form of a state-save-frame (plus some extra padding), in preparation for
-   a system call.  This macro makes sure that the EP, GP, and LP
-   registers are saved, and TYPE identifies the set of extra registers to
-   be saved as well.  Also copies (the new value of) SP to EP.  */
-#define PUSH_STATE(type)						      \
-	addi	-STATE_SAVE_SIZE, sp, sp; /* Make room on the stack.  */      \
-	st.w	ep, PTO+PT_GPR(GPR_EP)[sp];				      \
-	mov	sp, ep;							      \
-	sst.w	gp, PTO+PT_GPR(GPR_GP)[ep];				      \
-	sst.w	lp, PTO+PT_GPR(GPR_LP)[ep];				      \
-	type ## _STATE_SAVER
-/* Pop a register state pushed by PUSH_STATE, except for the stack pointer,
-   from the stack.  */
-#define POP_STATE(type)							      \
-	mov	sp, ep;							      \
-	type ## _STATE_RESTORER;					      \
-	sld.w	PTO+PT_GPR(GPR_GP)[ep], gp;				      \
-	sld.w	PTO+PT_GPR(GPR_LP)[ep], lp;				      \
-	sld.w	PTO+PT_GPR(GPR_EP)[ep], ep;				      \
-	addi	STATE_SAVE_SIZE, sp, sp /* Clean up our stack space.  */
-
-
-/* Switch to the kernel stack if necessary, and push register state on the
-   stack in the form of a state-save-frame.  Also load the current task
-   pointer if switching from user mode.  The stack-pointer (r3) should have
-   already been saved to the memory location SP_SAVE_LOC (the reason for
-   this is that the interrupt vectors may be beyond a 22-bit signed offset
-   jump from the actual interrupt handler, and this allows them to save the
-   stack-pointer and use that register to do an indirect jump).  This macro
-   makes sure that `special' registers, system registers, and the stack
-   pointer are saved; TYPE identifies the set of extra registers to be
-   saved as well.  SYSCALL_NUM is the register in which the system-call
-   number this state is for is stored (r0 if this isn't a system call).
-   Interrupts should already be disabled when calling this.  */
-#define SAVE_STATE(type, syscall_num, sp_save_loc)			      \
-	tst1	0, KM;			/* See if already in kernel mode.  */ \
-	bz	1f;							      \
-	ld.w	sp_save_loc, sp;	/* ... yes, use saved SP.  */	      \
-	br	2f;							      \
-1:	ld.w	KSP, sp;		/* ... no, switch to kernel stack. */ \
-2:	PUSH_STATE(type);						      \
-	ld.b	KM, r19;		/* Remember old kernel-mode.  */      \
-	sst.w	r19, PTO+PT_KERNEL_MODE[ep];				      \
-	ld.w	sp_save_loc, r19;	/* Remember old SP.  */		      \
-	sst.w	r19, PTO+PT_GPR(GPR_SP)[ep];				      \
-	mov	1, r19;			/* Now definitely in kernel-mode. */  \
-	st.b	r19, KM;						      \
-	GET_CURRENT_TASK(CURRENT_TASK);	/* Fetch the current task pointer. */ \
-	/* Save away the syscall number.  */				      \
-	sst.w	syscall_num, PTO+PT_CUR_SYSCALL[ep]
-
-
-/* Save register state not normally saved by PUSH_STATE for TYPE, to the
-   state-save-frame on the stack; also copies SP to EP.  r19 may be trashed. */
-#define SAVE_EXTRA_STATE(type)						      \
-	mov	sp, ep;							      \
-	type ## _EXTRA_STATE_SAVER
-/* Restore register state not normally restored by POP_STATE for TYPE,
-   from the state-save-frame on the stack; also copies SP to EP.
-   r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE(type)					      \
-	mov	sp, ep;							      \
-	type ## _EXTRA_STATE_RESTORER
-
-/* Save any call-clobbered registers not normally saved by PUSH_STATE for
-   TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most SAVE_... macros).  r19 may be trashed.  */
-#define SAVE_EXTRA_STATE_FOR_SCHEDULE(type)				      \
-	type ## _SCHEDULE_EXTRA_STATE_SAVER
-/* Restore any call-clobbered registers not normally restored by
-   POP_STATE for TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most RESTORE_... macros).  r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE_FOR_SCHEDULE(type)				      \
-	type ## _SCHEDULE_EXTRA_STATE_RESTORER
-
-
-/* These are extra_state_saver/restorer values for a user trap.  Note
-   that we save the argument registers so that restarted syscalls will
-   function properly (otherwise it wouldn't be necessary), and we must
-   _not_ restore the return-value registers (so that traps can return a
-   value!), but call-clobbered registers are not saved at all, as the
-   caller of the syscall function should have saved them.  */
-
-#define TRAP_RET reti
-/* Traps don't save call-clobbered registers (but do still save arg regs).
-   We preserve PSw to keep long-term state, namely interrupt status (for traps
-   from kernel-mode), and the single-step flag (for user traps).  */
-#define TRAP_STATE_SAVER						      \
-	SAVE_ARG_REGS;							      \
-	SAVE_PC(EIPC);							      \
-	SAVE_PSW(EIPSW)
-/* When traps return, they just leave call-clobbered registers (except for arg
-   regs) with whatever value they have from the kernel.  Traps don't preserve
-   the PSW, but we zero EIPSW to ensure it doesn't contain anything dangerous
-   (in particular, the single-step flag).  */
-#define TRAP_STATE_RESTORER						      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_PC(EIPC);						      \
-	RESTORE_PSW(EIPSW)
-/* Save registers not normally saved by traps.  We need to save r12, even
-   though it's nominally call-clobbered, because it's used when restarting
-   a system call (the signal-handling path uses SAVE_EXTRA_STATE, and
-   expects r12 to be restored when the trap returns).  */
-#define TRAP_EXTRA_STATE_SAVER						      \
-	SAVE_RVAL_REGS;							      \
-	sst.w	r12, PTO+PT_GPR(12)[ep];				      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define TRAP_EXTRA_STATE_RESTORER					      \
-	RESTORE_RVAL_REGS;						      \
-	sld.w	PTO+PT_GPR(12)[ep], r12;				      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-/* Save registers prior to calling scheduler (just before trap returns).
-   We have to save the return-value registers to preserve the trap's return
-   value.  Note that ..._SCHEDULE_EXTRA_STATE_SAVER, unlike most ..._SAVER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_SAVER					      \
-	mov sp, ep;							      \
-	SAVE_RVAL_REGS
-/* Note that ..._SCHEDULE_EXTRA_STATE_RESTORER, unlike most ..._RESTORER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_RESTORER				      \
-	mov sp, ep;							      \
-	RESTORE_RVAL_REGS
-
-/* Register saving/restoring for maskable interrupts.  */
-#define IRQ_RET reti
-#define IRQ_STATE_SAVER							      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(EIPC);							      \
-	SAVE_PSW(EIPSW)
-#define IRQ_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(EIPC);						      \
-	RESTORE_PSW(EIPSW)
-#define IRQ_EXTRA_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define IRQ_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define IRQ_SCHEDULE_EXTRA_STATE_SAVER	     /* nothing */
-#define IRQ_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for non-maskable interrupts.  */
-#define NMI_RET reti
-#define NMI_STATE_SAVER							      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(FEPC);							      \
-	SAVE_PSW(FEPSW);
-#define NMI_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(FEPC);						      \
-	RESTORE_PSW(FEPSW);
-#define NMI_EXTRA_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define NMI_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define NMI_SCHEDULE_EXTRA_STATE_SAVER	     /* nothing */
-#define NMI_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for debug traps.  */
-#define DBTRAP_RET .long 0x014607E0 /* `dbret', but gas doesn't support it. */
-#define DBTRAP_STATE_SAVER						      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(DBPC);							      \
-	SAVE_PSW(DBPSW)
-#define DBTRAP_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(DBPC);						      \
-	RESTORE_PSW(DBPSW)
-#define DBTRAP_EXTRA_STATE_SAVER					      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define DBTRAP_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define DBTRAP_SCHEDULE_EXTRA_STATE_SAVER	/* nothing */
-#define DBTRAP_SCHEDULE_EXTRA_STATE_RESTORER	/* nothing */
-
-/* Register saving/restoring for a context switch.  We don't need to save
-   too many registers, because context-switching looks like a function call
-   (via the function `switch_thread'), so callers will save any
-   call-clobbered registers themselves.  We do need to save the CT regs, as
-   they're normally not saved during kernel entry (the kernel doesn't use
-   them).  We save PSW so that interrupt-status state will correctly follow
-   each thread (mostly NMI vs. normal-IRQ/trap), though for the most part
-   it doesn't matter since threads are always in almost exactly the same
-   processor state during a context switch.  The stack pointer and return
-   value are handled by switch_thread itself.  */
-#define SWITCH_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_PSW(PSW);							      \
-	SAVE_CT_REGS
-#define SWITCH_STATE_RESTORER						      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_PSW(PSW);						      \
-	RESTORE_CT_REGS
-
-
-/* Restore register state from the state-save-frame on the stack, switch back
-   to the user stack if necessary, and return from the trap/interrupt.
-   EXTRA_STATE_RESTORER is a sequence of assembly language statements to
-   restore anything not restored by this macro.  Only registers not saved by
-   the C compiler are restored (that is, R3(sp), R4(gp), R31(lp), and
-   anything restored by EXTRA_STATE_RESTORER).  */
-#define RETURN(type)							      \
-	ld.b	PTO+PT_KERNEL_MODE[sp], r19;				      \
-	di;				/* Disable interrupts */	      \
-	cmp	r19, r0;		/* See if returning to kernel mode, */\
-	bne	2f;			/* ... if so, skip resched &c.  */    \
-									      \
-	/* We're returning to user mode, so check for various conditions that \
-	   trigger rescheduling. */					      \
-	GET_CURRENT_THREAD(r18);					      \
-	ld.w	TI_FLAGS[r18], r19;					      \
-	andi	_TIF_NEED_RESCHED, r19, r0;				      \
-	bnz	3f;			/* Call the scheduler.  */	      \
-5:	andi	_TIF_SIGPENDING, r19, r18;				      \
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19; /* ptrace flags */	      \
-	or	r18, r19;		/* see if either is non-zero */	      \
-	bnz	4f;			/* if so, handle them */	      \
-									      \
-/* Return to user state.  */						      \
-1:	st.b	r0, KM;			/* Now officially in user state. */   \
-									      \
-/* Final return.  The stack-pointer fiddling is not needed when returning     \
-   to kernel-mode, but they don't hurt, and this way we can share the	      \
-   (sometimes rather lengthy) POP_STATE macro.  */			      \
-2:	POP_STATE(type);						      \
-	st.w	sp, KSP;		/* Save the kernel stack pointer. */  \
-	ld.w	PT_GPR(GPR_SP)-PT_SIZE[sp], sp; /* Restore stack pointer. */  \
-	type ## _RET;			/* Return from the trap/interrupt. */ \
-									      \
-/* Call the scheduler before returning from a syscall/trap. */		      \
-3:	SAVE_EXTRA_STATE_FOR_SCHEDULE(type); /* Prepare to call scheduler. */ \
-	jarl	call_scheduler, lp;	/* Call scheduler */		      \
-	di;				/* The scheduler enables interrupts */\
-	RESTORE_EXTRA_STATE_FOR_SCHEDULE(type);				      \
-	GET_CURRENT_THREAD(r18);					      \
-	ld.w	TI_FLAGS[r18], r19;					      \
-	br	5b;			/* Continue with return path. */      \
-									      \
-/* Handle a signal or ptraced process return.				      \
-   r18 should be non-zero if there are pending signals.  */		      \
-4:	/* Not all registers are saved by the normal trap/interrupt entry     \
-	   points (for instance, call-saved registers (because the normal     \
-	   C-compiler calling sequence in the kernel makes sure they're	      \
-	   preserved), and call-clobbered registers in the case of	      \
-	   traps), but signal handlers may want to examine or change the      \
-	   complete register state.  Here we save anything not saved by	      \
-	   the normal entry sequence, so that it may be safely restored	      \
-	   (in a possibly modified form) after do_signal returns.  */	      \
-	SAVE_EXTRA_STATE(type);		/* Save state not saved by entry. */  \
-	jarl	handle_signal_or_ptrace_return, lp;			      \
-	RESTORE_EXTRA_STATE(type);	/* Restore extra regs.  */	      \
-	br	1b
-
-
-/* Jump to the appropriate function for the system call number in r12
-   (r12 is not preserved), or return an error if r12 is not valid.  The
-   LP register should point to the location where the called function
-   should return.  [note that MAKE_SYS_CALL uses label 1]  */
-#define MAKE_SYS_CALL							      \
-	/* Figure out which function to use for this system call.  */	      \
-	shl	2, r12;							      \
-	/* See if the system call number is valid.  */			      \
-	addi	lo(CSYM(sys_call_table) - sys_call_table_end), r12, r0;	      \
-	bnh	1f;							      \
-	mov	hilo(CSYM(sys_call_table)), r19;			      \
-	add	r19, r12;						      \
-	ld.w	0[r12], r12;						      \
-	/* Make the system call.  */					      \
-	jmp	[r12];							      \
-	/* The syscall number is invalid, return an error.  */		      \
-1:	addi	-ENOSYS, r0, r10;					      \
-	jmp	[lp]
-
-
-	.text
-
-/*
- * User trap.
- *
- * Trap 0 system calls are also handled here.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- *
- * Syscall protocol:
- *   Syscall number in r12, args in r6-r9
- *   Return value in r10
- */
-G_ENTRY(trap):
-	SAVE_STATE (TRAP, r12, ENTRY_SP) // Save registers.
-	stsr	SR_ECR, r19		// Find out which trap it was.
-	ei				// Enable interrupts.
-	mov	hilo(ret_from_trap), lp	// where the trap should return
-
-	// The following two shifts (1) clear out extraneous NMI data in the
-	// upper 16-bits, (2) convert the 0x40 - 0x5f range of trap ECR
-	// numbers into the (0-31) << 2 range we want, (3) set the flags.
-	shl	27, r19			// chop off all high bits
-	shr	25, r19			// scale back down and then << 2
-	bnz	2f			// See if not trap 0.
-
-	// Trap 0 is a `short' system call, skip general trap table.
-	MAKE_SYS_CALL			// Jump to the syscall function.
-
-2:	// For other traps, use a table lookup.
-	mov	hilo(CSYM(trap_table)), r18
-	add	r19, r18
-	ld.w	0[r18], r18
-	jmp	[r18]			// Jump to the trap handler.
-END(trap)
-
-/* This is just like ret_from_trap, but first restores extra registers
-   saved by some wrappers.  */
-L_ENTRY(restore_extra_regs_and_ret_from_trap):
-	RESTORE_EXTRA_STATE(TRAP)
-	// fall through
-END(restore_extra_regs_and_ret_from_trap)
-
-/* Entry point used to return from a syscall/trap.  */
-L_ENTRY(ret_from_trap):
-	RETURN(TRAP)
-END(ret_from_trap)
-
-
-/* This the initial entry point for a new child thread, with an appropriate
-   stack in place that makes it look that the child is in the middle of an
-   syscall.  This function is actually `returned to' from switch_thread
-   (copy_thread makes ret_from_fork the return address in each new thread's
-   saved context).  */
-C_ENTRY(ret_from_fork):
-	mov	r10, r6			// switch_thread returns the prev task.
-	jarl	CSYM(schedule_tail), lp	// ...which is schedule_tail's arg
-	mov	r0, r10			// Child's fork call should return 0.
-	br	ret_from_trap		// Do normal trap return.
-C_END(ret_from_fork)
-
-
-/*
- * Trap 1: `long' system calls
- * `Long' syscall protocol:
- *   Syscall number in r12, args in r6-r9, r13-r14
- *   Return value in r10
- */
-L_ENTRY(syscall_long):
-	// Push extra arguments on the stack.  Note that by default, the trap
-	// handler reserves enough stack space for 6 arguments, so we don't
-	// have to make any additional room.
-	st.w	r13, 16[sp]		// arg 5
-	st.w	r14, 20[sp]		// arg 6
-
-	// Make sure r13 and r14 are preserved, in case we have to restart a
-	// system call because of a signal (ep has already been set by caller).
-	st.w	r13, PTO+PT_GPR(13)[sp]
-	st.w	r14, PTO+PT_GPR(13)[sp]
-	mov	hilo(ret_from_long_syscall), lp
-
-	MAKE_SYS_CALL			// Jump to the syscall function.
-END(syscall_long)
-
-/* Entry point used to return from a long syscall.  Only needed to restore
-   r13/r14 if the general trap mechanism doesnt' do so.  */
-L_ENTRY(ret_from_long_syscall):
-	ld.w	PTO+PT_GPR(13)[sp], r13 // Restore the extra registers
-	ld.w	PTO+PT_GPR(13)[sp], r14
-	br	ret_from_trap		// The rest is the same as other traps
-END(ret_from_long_syscall)
-
-
-/* These syscalls need access to the struct pt_regs on the stack, so we
-   implement them in assembly (they're basically all wrappers anyway).  */
-
-L_ENTRY(sys_fork_wrapper):
-#ifdef CONFIG_MMU
-	addi	SIGCHLD, r0, r6		   // Arg 0: flags
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-#else
-	// fork almost works, enough to trick you into looking elsewhere :-(
-	addi	-EINVAL, r0, r10
-	jmp	[lp]
-#endif
-END(sys_fork_wrapper)
-
-L_ENTRY(sys_vfork_wrapper):
-	addi	CLONE_VFORK | CLONE_VM | SIGCHLD, r0, r6 // Arg 0: flags
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-END(sys_vfork_wrapper)
-
-L_ENTRY(sys_clone_wrapper):
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r19// parent's stack pointer
-	cmp	r7, r0			   // See if child SP arg (arg 1) is 0.
-	cmov	z, r19, r7, r7		   // ... and use the parent's if so.
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-END(sys_clone_wrapper)
-
-
-L_ENTRY(sys_execve_wrapper):
-	movea	PTO, sp, r9		// add user context as 4th arg
-	jr	CSYM(sys_execve)	// Do real work (tail-call).
-END(sys_execve_wrapper)
-
-
-L_ENTRY(sys_sigsuspend_wrapper):
-	movea	PTO, sp, r7		// add user context as 2nd arg
-	mov	hilo(CSYM(sys_sigsuspend)), r18	// syscall function
-	jarl	save_extra_state_tramp, lp	// Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_sigsuspend_wrapper)
-L_ENTRY(sys_rt_sigsuspend_wrapper):
-	movea	PTO, sp, r8		// add user context as 3rd arg
-	mov	hilo(CSYM(sys_rt_sigsuspend)), r18 // syscall function
-	jarl	save_extra_state_tramp, lp	   // Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigsuspend_wrapper)
-
-L_ENTRY(sys_sigreturn_wrapper):
-	movea	PTO, sp, r6		// add user context as 1st arg
-	mov	hilo(CSYM(sys_sigreturn)), r18	// syscall function
-	jarl	save_extra_state_tramp, lp	// Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_sigreturn_wrapper)
-L_ENTRY(sys_rt_sigreturn_wrapper):
-	movea	PTO, sp, r6		// add user context as 1st arg
-	mov	hilo(CSYM(sys_rt_sigreturn)), r18// syscall function
-	jarl	save_extra_state_tramp, lp	 // Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigreturn_wrapper)
-
-
-/* Save any state not saved by SAVE_STATE(TRAP), and jump to r18.
-   It's main purpose is to share the rather lengthy code sequence that
-   SAVE_STATE expands into among the above wrapper functions.  */
-L_ENTRY(save_extra_state_tramp):
-	SAVE_EXTRA_STATE(TRAP)		// Save state not saved by entry.
-	jmp	[r18]			// Do the work the caller wants
-END(save_extra_state_tramp)
-
-
-/*
- * Hardware maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(irq):
-	SAVE_STATE (IRQ, r0, ENTRY_SP)	// Save registers.
-
-	stsr	SR_ECR, r6		// Find out which interrupt it was.
-	movea	PTO, sp, r7		// User regs are arg2
-
-	// All v850 implementations I know about encode their interrupts as
-	// multiples of 0x10, starting at 0x80 (after NMIs and software
-	// interrupts).  Convert this number into a simple IRQ index for the
-	// rest of the kernel.  We also clear the upper 16 bits, which hold
-	// NMI info, and don't appear to be cleared when a NMI returns.
-	shl	16, r6			// clear upper 16 bits
-	shr	20, r6			// shift back, and remove lower nibble
-	add	-8, r6			// remove bias for irqs
-
-	// Call the high-level interrupt handling code.
-	jarl	CSYM(handle_irq), lp
-
-	RETURN(IRQ)
-END(irq)
-
-
-/*
- * Debug trap / illegal-instruction exception
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(dbtrap):
-	SAVE_STATE (DBTRAP, r0, ENTRY_SP)// Save registers.
-
-	/* First see if we came from kernel mode; if so, the dbtrap
-	   instruction has a special meaning, to set the DIR (`debug
-	   information register') register.  This is because the DIR register
-	   can _only_ be manipulated/read while in `debug mode,' and debug
-	   mode is only active while we're inside the dbtrap handler.  The
-	   exact functionality is:  { DIR = (DIR | r6) & ~r7; return DIR; }. */
-	ld.b	PTO+PT_KERNEL_MODE[sp], r19
-	cmp	r19, r0
-	bz	1f
-
-	stsr	SR_DIR, r10
-	or	r6, r10
-	not	r7, r7
-	and	r7, r10
-	ldsr	r10, SR_DIR
-	stsr	SR_DIR, r10		// Confirm the value we set
-	st.w	r10, PTO+PT_GPR(10)[sp]	// return it
-	br	3f
-
-1:	ei				// Enable interrupts.
-
-	/* The default signal type we raise.  */
-	mov	SIGTRAP, r6
-
-	/* See if it's a single-step trap.  */
-	stsr	SR_DBPSW, r19
-	andi	0x0800, r19, r19
-	bnz	2f
-
-	/* Look to see if the preceding instruction was is a dbtrap or not,
-	   to decide which signal we should use.  */
-	stsr	SR_DBPC, r19		// PC following trapping insn
-	ld.hu	-2[r19], r19
-	ori	0xf840, r0, r20		// DBTRAP insn
-	cmp	r19, r20		// Was this trap caused by DBTRAP?
-	cmov	ne, SIGILL, r6, r6	// Choose signal appropriately
-
-	/* Raise the desired signal.  */
-2:	mov	CURRENT_TASK, r7	// Arg 1: task
-	jarl	CSYM(send_sig), lp	// tail call
-
-3:	RETURN(DBTRAP)
-END(dbtrap)
-
-
-/*
- * Hardware non-maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(nmi):
-	SAVE_STATE (NMI, r0, NMI_ENTRY_SP); /* Save registers.  */
-
-	stsr	SR_ECR, r6;		/* Find out which nmi it was.  */
-	shr	20, r6;			/* Extract NMI code in bits 20-24. */
-	movea	PTO, sp, r7;		/* User regs are arg2.  */
-
-	/* Non-maskable interrupts always lie right after maskable interrupts.
-	   Call the generic IRQ handler, with two arguments, the IRQ number,
-	   and a pointer to the user registers, to handle the specifics.
-	   (we subtract one because the first NMI has code 1).  */
-	addi	FIRST_NMI - 1, r6, r6
-	jarl	CSYM(handle_irq), lp
-
-	RETURN(NMI)
-END(nmi)
-
-
-/*
- * Trap with no handler
- */
-L_ENTRY(bad_trap_wrapper):
-	mov	r19, r6			// Arg 0: trap number
-	movea	PTO, sp, r7		// Arg 1: user regs
-	jr	CSYM(bad_trap)		// tail call handler
-END(bad_trap_wrapper)
-
-
-/*
- * Invoke the scheduler, called from the trap/irq kernel exit path.
- *
- * This basically just calls `schedule', but also arranges for extra
- * registers to be saved for ptrace'd processes, so ptrace can modify them.
- */
-L_ENTRY(call_scheduler):
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19	// See if task is ptrace'd
-	cmp	r19, r0
-	bnz	1f			// ... yes, do special stuff
-	jr	CSYM(schedule)		// ... no, just tail-call scheduler
-
-	// Save extra regs for ptrace'd task.  We want to save anything
-	// that would otherwise only be `implicitly' saved by the normal
-	// compiler calling-convention.
-1:	mov	sp, ep			// Setup EP for SAVE_CALL_SAVED_REGS
-	SAVE_CALL_SAVED_REGS		// Save call-saved registers to stack
-	mov	lp, r20			// Save LP in a callee-saved register
-
-	jarl	CSYM(schedule), lp	// Call scheduler
-
-	mov	r20, lp
-	mov	sp, ep			// We can't rely on EP after return
-	RESTORE_CALL_SAVED_REGS		// Restore (possibly modified) regs
-	jmp	[lp]			// Return to the return path
-END(call_scheduler)
-
-
-/*
- * This is an out-of-line handler for two special cases during the kernel
- * trap/irq exit sequence:
- *
- *  (1) If r18 is non-zero then a signal needs to be handled, which is
- *	done, and then the caller returned to.
- *
- *  (2) If r18 is non-zero then we're returning to a ptraced process, which
- *	has several special cases -- single-stepping and trap tracing, both
- *	of which require using the `dbret' instruction to exit the kernel
- *	instead of the normal `reti' (this is because the CPU not correctly
- *	single-step after a reti).  In this case, of course, this handler
- *	never returns to the caller.
- *
- * In either case, all registers should have been saved to the current
- * state-save-frame on the stack, except for callee-saved registers.
- *
- * [These two different cases are combined merely to avoid bloating the
- * macro-inlined code, not because they really make much sense together!]
- */
-L_ENTRY(handle_signal_or_ptrace_return):
-	cmp	r18, r0			// See if handling a signal
-	bz	1f			// ... nope, go do ptrace return
-
-	// Handle a signal
-	mov	lp, r20			// Save link-pointer
-	mov	r10, r21		// Save return-values (for trap)
-	mov	r11, r22
-
-	movea	PTO, sp, r6		// Arg 1: struct pt_regs *regs
-	mov	r0, r7			// Arg 2: sigset_t *oldset
-	jarl	CSYM(do_signal), lp	// Handle the signal
-	di				// sig handling enables interrupts
-
-	mov	r20, lp			// Restore link-pointer
-	mov	r21, r10		// Restore return-values (for trap)
-	mov	r22, r11
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19  // check ptrace flags too
-	cmp	r19, r0
-	bnz	1f			// ... some set, so look more
-2:	jmp	[lp]			// ... none set, so return normally
-
-	// ptrace return
-1:	ld.w	PTO+PT_PSW[sp], r19	// Look at user-processes's flags
-	andi	0x0800, r19, r19	// See if single-step flag is set
-	bz	2b			// ... nope, return normally
-
-	// Return as if from a dbtrap insn
-	st.b	r0, KM			// Now officially in user state.
-	POP_STATE(DBTRAP)		// Restore regs
-	st.w	sp, KSP			// Save the kernel stack pointer.
-	ld.w	PT_GPR(GPR_SP)-PT_SIZE[sp], sp // Restore user stack pointer.
-	DBTRAP_RET			// Return from the trap/interrupt.
-END(handle_signal_or_ptrace_return)
-
-
-/*
- * This is where we switch between two threads.  The arguments are:
- *   r6 -- pointer to the struct thread for the `current' process
- *   r7 -- pointer to the struct thread for the `new' process.
- * when this function returns, it will return to the new thread.
- */
-C_ENTRY(switch_thread):
-	// Return the previous task (r10 is not clobbered by restore below)
-	mov	CURRENT_TASK, r10
-	// First, push the current processor state on the stack
-	PUSH_STATE(SWITCH)
-	// Now save the location of the kernel stack pointer for this thread;
-	// since we've pushed all other state on the stack, this is enough to
-	// restore it all later.
-	st.w	sp, THREAD_KSP[r6]
-	// Now restore the stack pointer from the new process
-	ld.w	THREAD_KSP[r7], sp
-	// ... and restore all state from that
-	POP_STATE(SWITCH)
-	// Update the current task pointer
-	GET_CURRENT_TASK(CURRENT_TASK)
-	// Now return into the new thread
-	jmp	[lp]
-C_END(switch_thread)
-
-
-	.data
-
-	.align 4
-C_DATA(trap_table):
-	.long bad_trap_wrapper		// trap 0, doesn't use trap table.
-	.long syscall_long		// trap 1, `long' syscall.
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-C_END(trap_table)
-
-
-	.section .rodata
-
-	.align 4
-C_DATA(sys_call_table):
-	.long CSYM(sys_restart_syscall)	// 0
-	.long CSYM(sys_exit)
-	.long sys_fork_wrapper
-	.long CSYM(sys_read)
-	.long CSYM(sys_write)
-	.long CSYM(sys_open)		// 5
-	.long CSYM(sys_close)
-	.long CSYM(sys_waitpid)
-	.long CSYM(sys_creat)
-	.long CSYM(sys_link)
-	.long CSYM(sys_unlink)		// 10
-	.long sys_execve_wrapper
-	.long CSYM(sys_chdir)
-	.long CSYM(sys_time)
-	.long CSYM(sys_mknod)
-	.long CSYM(sys_chmod)		// 15
-	.long CSYM(sys_chown)
-	.long CSYM(sys_ni_syscall)	// was: break
-	.long CSYM(sys_ni_syscall)	// was: oldstat (aka stat)
-	.long CSYM(sys_lseek)
-	.long CSYM(sys_getpid)		// 20
-	.long CSYM(sys_mount)
-	.long CSYM(sys_oldumount)
-	.long CSYM(sys_setuid)
-	.long CSYM(sys_getuid)
-	.long CSYM(sys_stime)		// 25
-	.long CSYM(sys_ptrace)
-	.long CSYM(sys_alarm)
-	.long CSYM(sys_ni_syscall)	// was: oldfstat (aka fstat)
-	.long CSYM(sys_pause)
-	.long CSYM(sys_utime)		// 30
-	.long CSYM(sys_ni_syscall)	// was: stty
-	.long CSYM(sys_ni_syscall)	// was: gtty
-	.long CSYM(sys_access)
-	.long CSYM(sys_nice)
-	.long CSYM(sys_ni_syscall)	// 35, was: ftime
-	.long CSYM(sys_sync)
-	.long CSYM(sys_kill)
-	.long CSYM(sys_rename)
-	.long CSYM(sys_mkdir)
-	.long CSYM(sys_rmdir)		// 40
-	.long CSYM(sys_dup)
-	.long CSYM(sys_pipe)
-	.long CSYM(sys_times)
-	.long CSYM(sys_ni_syscall)	// was: prof
-	.long CSYM(sys_brk)		// 45
-	.long CSYM(sys_setgid)
-	.long CSYM(sys_getgid)
-	.long CSYM(sys_signal)
-	.long CSYM(sys_geteuid)
-	.long CSYM(sys_getegid)		// 50
-	.long CSYM(sys_acct)
-	.long CSYM(sys_umount)		// recycled never used phys()
-	.long CSYM(sys_ni_syscall)	// was: lock
-	.long CSYM(sys_ioctl)
-	.long CSYM(sys_fcntl)		// 55
-	.long CSYM(sys_ni_syscall)	// was: mpx
-	.long CSYM(sys_setpgid)
-	.long CSYM(sys_ni_syscall)	// was: ulimit
-	.long CSYM(sys_ni_syscall)
-	.long CSYM(sys_umask)		// 60
-	.long CSYM(sys_chroot)
-	.long CSYM(sys_ustat)
-	.long CSYM(sys_dup2)
-	.long CSYM(sys_getppid)
-	.long CSYM(sys_getpgrp)		// 65
-	.long CSYM(sys_setsid)
-	.long CSYM(sys_sigaction)
-	.long CSYM(sys_sgetmask)
-	.long CSYM(sys_ssetmask)
-	.long CSYM(sys_setreuid)	// 70
-	.long CSYM(sys_setregid)
-	.long sys_sigsuspend_wrapper
-	.long CSYM(sys_sigpending)
-	.long CSYM(sys_sethostname)
-	.long CSYM(sys_setrlimit)	// 75
-	.long CSYM(sys_getrlimit)
-	.long CSYM(sys_getrusage)
-	.long CSYM(sys_gettimeofday)
-	.long CSYM(sys_settimeofday)
-	.long CSYM(sys_getgroups)	// 80
-	.long CSYM(sys_setgroups)
-	.long CSYM(sys_select)
-	.long CSYM(sys_symlink)
-	.long CSYM(sys_ni_syscall)	// was: oldlstat (aka lstat)
-	.long CSYM(sys_readlink)	// 85
-	.long CSYM(sys_uselib)
-	.long CSYM(sys_swapon)
-	.long CSYM(sys_reboot)
-	.long CSYM(old_readdir)
-	.long CSYM(sys_mmap)		// 90
-	.long CSYM(sys_munmap)
-	.long CSYM(sys_truncate)
-	.long CSYM(sys_ftruncate)
-	.long CSYM(sys_fchmod)
-	.long CSYM(sys_fchown)		// 95
-	.long CSYM(sys_getpriority)
-	.long CSYM(sys_setpriority)
-	.long CSYM(sys_ni_syscall)	// was: profil
-	.long CSYM(sys_statfs)
-	.long CSYM(sys_fstatfs)		// 100
-	.long CSYM(sys_ni_syscall)	// i386: ioperm
-	.long CSYM(sys_socketcall)
-	.long CSYM(sys_syslog)
-	.long CSYM(sys_setitimer)
-	.long CSYM(sys_getitimer)	// 105
-	.long CSYM(sys_newstat)
-	.long CSYM(sys_newlstat)
-	.long CSYM(sys_newfstat)
-	.long CSYM(sys_ni_syscall)	// was: olduname (aka uname)
-	.long CSYM(sys_ni_syscall)	// 110, i386: iopl
-	.long CSYM(sys_vhangup)
-	.long CSYM(sys_ni_syscall)	// was: idle
-	.long CSYM(sys_ni_syscall)	// i386: vm86old
-	.long CSYM(sys_wait4)
-	.long CSYM(sys_swapoff)		// 115
-	.long CSYM(sys_sysinfo)
-	.long CSYM(sys_ipc)
-	.long CSYM(sys_fsync)
-	.long sys_sigreturn_wrapper
-	.long sys_clone_wrapper		// 120
-	.long CSYM(sys_setdomainname)
-	.long CSYM(sys_newuname)
-	.long CSYM(sys_ni_syscall)	// i386: modify_ldt, m68k: cacheflush
-	.long CSYM(sys_adjtimex)
-	.long CSYM(sys_ni_syscall)	// 125 - sys_mprotect
-	.long CSYM(sys_sigprocmask)
-	.long CSYM(sys_ni_syscall)	// sys_create_module
-	.long CSYM(sys_init_module)
-	.long CSYM(sys_delete_module)
-	.long CSYM(sys_ni_syscall)	// 130 - sys_get_kernel_syms
-	.long CSYM(sys_quotactl)
-	.long CSYM(sys_getpgid)
-	.long CSYM(sys_fchdir)
-	.long CSYM(sys_bdflush)
-	.long CSYM(sys_sysfs)		// 135
-	.long CSYM(sys_personality)
-	.long CSYM(sys_ni_syscall)	// for afs_syscall
-	.long CSYM(sys_setfsuid)
-	.long CSYM(sys_setfsgid)
-	.long CSYM(sys_llseek)		// 140
-	.long CSYM(sys_getdents)
-	.long CSYM(sys_select)		// for backward compat; remove someday
-	.long CSYM(sys_flock)
-	.long CSYM(sys_ni_syscall)	// sys_msync
-	.long CSYM(sys_readv)		// 145
-	.long CSYM(sys_writev)
-	.long CSYM(sys_getsid)
-	.long CSYM(sys_fdatasync)
-	.long CSYM(sys_sysctl)
-	.long CSYM(sys_ni_syscall)	// 150 - sys_mlock
-	.long CSYM(sys_ni_syscall)	// sys_munlock
-	.long CSYM(sys_ni_syscall)	// sys_mlockall
-	.long CSYM(sys_ni_syscall)	// sys_munlockall
-	.long CSYM(sys_sched_setparam)
-	.long CSYM(sys_sched_getparam)	// 155
-	.long CSYM(sys_sched_setscheduler)
-	.long CSYM(sys_sched_getscheduler)
-	.long CSYM(sys_sched_yield)
-	.long CSYM(sys_sched_get_priority_max)
-	.long CSYM(sys_sched_get_priority_min)	// 160
-	.long CSYM(sys_sched_rr_get_interval)
-	.long CSYM(sys_nanosleep)
-	.long CSYM(sys_ni_syscall)	// sys_mremap
-	.long CSYM(sys_setresuid)
-	.long CSYM(sys_getresuid)	// 165
-	.long CSYM(sys_ni_syscall)	// for vm86
-	.long CSYM(sys_ni_syscall)	// sys_query_module
-	.long CSYM(sys_poll)
-	.long CSYM(sys_nfsservctl)
-	.long CSYM(sys_setresgid)	// 170
-	.long CSYM(sys_getresgid)
-	.long CSYM(sys_prctl)
-	.long sys_rt_sigreturn_wrapper
-	.long CSYM(sys_rt_sigaction)
-	.long CSYM(sys_rt_sigprocmask)	// 175
-	.long CSYM(sys_rt_sigpending)
-	.long CSYM(sys_rt_sigtimedwait)
-	.long CSYM(sys_rt_sigqueueinfo)
-	.long sys_rt_sigsuspend_wrapper
-	.long CSYM(sys_pread64)		// 180
-	.long CSYM(sys_pwrite64)
-	.long CSYM(sys_lchown)
-	.long CSYM(sys_getcwd)
-	.long CSYM(sys_capget)
-	.long CSYM(sys_capset)		// 185
-	.long CSYM(sys_sigaltstack)
-	.long CSYM(sys_sendfile)
-	.long CSYM(sys_ni_syscall)	// streams1
-	.long CSYM(sys_ni_syscall)	// streams2
-	.long sys_vfork_wrapper		// 190
-	.long CSYM(sys_ni_syscall)
-	.long CSYM(sys_mmap2)
-	.long CSYM(sys_truncate64)
-	.long CSYM(sys_ftruncate64)
-	.long CSYM(sys_stat64)		// 195
-	.long CSYM(sys_lstat64)
-	.long CSYM(sys_fstat64)
-	.long CSYM(sys_fcntl64)
-	.long CSYM(sys_getdents64)
-	.long CSYM(sys_pivot_root)	// 200
-	.long CSYM(sys_gettid)
-	.long CSYM(sys_tkill)
-sys_call_table_end:
-C_END(sys_call_table)
diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c
deleted file mode 100644
index ab9cf16a85c8..000000000000
--- a/arch/v850/kernel/fpga85e2c.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * arch/v850/kernel/fpga85e2c.h -- Machine-dependent defs for
- *	FPGA implementation of V850E2/NA85E2C
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-extern void memcons_setup (void);
-
-
-#define REG_DUMP_ADDR		0x220000
-
-
-extern struct irqaction reg_snap_action; /* fwd decl */
-
-
-void __init mach_early_init (void)
-{
-	int i;
-	const u32 *src;
-	register u32 *dst asm ("ep");
-	extern u32 _intv_end, _intv_load_start;
-
-	/* Set bus sizes: CS0 32-bit, CS1 16-bit, CS7 8-bit,
-	   everything else 32-bit.  */
-	V850E2_BSC = 0x2AA6;
-	for (i = 2; i <= 6; i++)
-		CSDEV(i) = 0;	/* 32 bit */
-
-	/* Ensure that the simulator halts on a panic, instead of going
-	   into an infinite loop inside the panic function.  */
-	panic_timeout = -1;
-
-	/* Move the interrupt vectors into their real location.  Note that
-	   any relocations there are relative to the real location, so we
-	   don't have to fix anything up.  We use a loop instead of calling
-	   memcpy to keep this a leaf function (to avoid a function
-	   prologue being generated).  */
-	dst = 0x10;		/* &_intv_start + 0x10.  */
-	src = &_intv_load_start;
-	do {
-		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-		u32 t4 = src[4], t5 = src[5], t6 = src[6], t7 = src[7];
-		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-		dst[4] = t4; dst[5] = t5; dst[6] = t6; dst[7] = t7;
-		dst += 8;
-		src += 8;
-	} while (dst < &_intv_end);
-}
-
-void __init mach_setup (char **cmdline)
-{
-	memcons_setup ();
-
-	/* Setup up NMI0 to copy the registers to a known memory location.
-	   The FGPA board has a button that produces NMI0 when pressed, so
-	   this allows us to push the button, and then look at memory to see
-	   what's in the registers (there's no other way to easily do so).
-	   We have to use `setup_irq' instead of `request_irq' because it's
-	   still too early to do memory allocation.  */
-	setup_irq (IRQ_NMI (0), &reg_snap_action);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = ERAM_ADDR;
-	*ram_len = ERAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Setup up the timer interrupt.  The FPGA peripheral control
-	   registers _only_ work with single-bit writes (set1/clr1)!  */
-	__clear_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-	__clear_bit (RPU_GTMC_CLK_BIT, &RPU_GTMC);
-	__set_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-
-	/* We use the first RPU interrupt, which occurs every 8.192ms.  */
-	setup_irq (IRQ_RPU (0), timer_action);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-	for (;;) {
-		DWC(0) = 0x7777;
-		DWC(1) = 0x7777;
-		ASC = 0xffff;
-		FLGREG(0) = 1;	/* Halt immediately.  */
-		asm ("di; halt; nop; nop; nop; nop; nop");
-	}
-}
-
-void machine_restart (char *__unused)
-{
-	machine_halt ();
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "RPU", IRQ_RPU(0),	IRQ_RPU_NUM,	1, 6 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-/* An interrupt handler that copies the registers to a known memory location,
-   for debugging purposes.  */
-
-static void make_reg_snap (int irq, void *dummy, struct pt_regs *regs)
-{
-	(*(unsigned *)REG_DUMP_ADDR)++;
-	(*(struct pt_regs *)(REG_DUMP_ADDR + sizeof (unsigned))) = *regs;
-}
-
-static int reg_snap_dev_id;
-static struct irqaction reg_snap_action = {
-	.handler = make_reg_snap,
-	.mask = CPU_MASK_NONE,
-	.name = "reg_snap",
-	.dev_id = &reg_snap_dev_id,
-};
diff --git a/arch/v850/kernel/fpga85e2c.ld b/arch/v850/kernel/fpga85e2c.ld
deleted file mode 100644
index b5d4578ae411..000000000000
--- a/arch/v850/kernel/fpga85e2c.ld
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Linker script for the FPGA implementation of the V850E2 NA85E2C cpu core
-   (CONFIG_V850E2_FPGA85E2C).  */
-
-MEMORY {
-	/* Reset vector.  */
-	RESET	 : ORIGIN = 0, LENGTH = 0x10
-	/* Interrupt vectors.  */
-	INTV      : ORIGIN = 0x10, LENGTH = 0x470
-	/* The `window' in RAM were we're allowed to load stuff.  */
-	RAM_LOW   : ORIGIN = 0x480, LENGTH = 0x0005FB80
-	/* Some more ram above the window were we can put bss &c.  */
-	RAM_HIGH  : ORIGIN = 0x00060000, LENGTH = 0x000A0000
-	/* This is the area visible from the outside world (we can use
-	   this only for uninitialized data).  */
-	VISIBLE   : ORIGIN = 0x00200000, LENGTH = 0x00060000
-}
-
-SECTIONS {
-	.reset : {
-		__kram_start = . ;
-		__intv_start = . ;
-	        	*(.intv.reset)	/* Reset vector */
-	} > RESET
-
-	.ram_low : {
-		__r0_ram = . ;		/* Must be near address 0.  */
-		. = . + 32 ;
-
-		TEXT_CONTENTS
-		DATA_CONTENTS
-		ROOT_FS_CONTENTS
-		RAMK_INIT_CONTENTS_NO_END
-		INITRAMFS_CONTENTS
-	} > RAM_LOW
-
-        /* Where the interrupt vectors are initially loaded.  */
-	__intv_load_start = . ;
-
-	.intv : {
-			*(.intv.common)	/* Vectors common to all v850e proc. */
-			*(.intv.mach)	/* Machine-specific int. vectors.  */
-		__intv_end = . ;
-	} > INTV  AT> RAM_LOW
-
-	.ram_high : {
-		/* This is here so that when we free init memory the
-		   load-time copy of the interrupt vectors and any empty
-		   space at the end of the `RAM_LOW' area is freed too.  */
-		. = ALIGN (4096);
-		__init_end = . ;
-
-		BSS_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-	} > RAM_HIGH
-
-	.visible : {
-		_memcons_output = . ;
-		. = . + 0x8000 ;
-		_memcons_output_end = . ;
-	} > VISIBLE
-}
diff --git a/arch/v850/kernel/gbus_int.c b/arch/v850/kernel/gbus_int.c
deleted file mode 100644
index b2bcc251f65b..000000000000
--- a/arch/v850/kernel/gbus_int.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * arch/v850/kernel/gbus_int.c -- Midas labs GBUS interrupt support
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-
-
-/* The number of shared GINT interrupts. */
-#define NUM_GINTS   	4
-
-/* For each GINT interrupt, how many GBUS interrupts are using it.  */
-static unsigned gint_num_active_irqs[NUM_GINTS] = { 0 };
-
-/* A table of GINTn interrupts we actually use.
-   Note that we don't use GINT0 because all the boards we support treat it
-   specially.  */
-struct used_gint {
-	unsigned gint;
-	unsigned priority;
-} used_gint[] = {
-	{ 1, GBUS_INT_PRIORITY_HIGH },
-	{ 3, GBUS_INT_PRIORITY_LOW }
-};
-#define NUM_USED_GINTS ARRAY_SIZE(used_gint)
-
-/* A table of which GINT is used by each GBUS interrupts (they are
-   assigned based on priority).  */
-static unsigned char gbus_int_gint[IRQ_GBUS_INT_NUM];
-
-
-/* Interrupt enabling/disabling.  */
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void gbus_int_enable_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		|= GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Disable interrupt handling for interrupt IRQ.  Note that any
-   interrupts received while disabled will be delivered once the
-   interrupt is enabled again, unless they are explicitly cleared using
-   `gbus_int_clear_pending_irq'.  */
-void gbus_int_disable_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		&= ~GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt handling for interrupt IRQ is enabled.  */
-int gbus_int_irq_enabled (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	return (GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		& GBUS_INT_IRQ_MASK(irq));
-}
-
-/* Disable all GBUS irqs.  */
-void gbus_int_disable_irqs ()
-{
-	unsigned w, n;
-	for (w = 0; w < GBUS_INT_NUM_WORDS; w++)
-		for (n = 0; n < IRQ_GINT_NUM; n++)
-			GBUS_INT_ENABLE (w, n) = 0;
-}
-
-/* Clear any pending interrupts for IRQ.  */
-void gbus_int_clear_pending_irq (unsigned irq)
-{
-	GBUS_INT_CLEAR (GBUS_INT_IRQ_WORD(irq)) = GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt IRQ is pending (but disabled).  */
-int gbus_int_irq_pending (unsigned irq)
-{
-	return (GBUS_INT_STATUS (GBUS_INT_IRQ_WORD(irq))
-		& GBUS_INT_IRQ_MASK(irq));
-}
-
-
-/* Delegating interrupts.  */
-
-/* Handle a shared GINT interrupt by passing to the appropriate GBUS
-   interrupt handler.  */
-static irqreturn_t gbus_int_handle_irq (int irq, void *dev_id,
-					struct pt_regs *regs)
-{
-	unsigned w;
-	irqreturn_t rval = IRQ_NONE;
-	unsigned gint = irq - IRQ_GINT (0);
-
-	for (w = 0; w < GBUS_INT_NUM_WORDS; w++) {
-		unsigned status = GBUS_INT_STATUS (w);
-		unsigned enable = GBUS_INT_ENABLE (w, gint);
-
-		/* Only pay attention to enabled interrupts.  */
-		status &= enable;
-		if (status) {
-			irq = IRQ_GBUS_INT (w * GBUS_INT_BITS_PER_WORD);
-			do {
-				/* There's an active interrupt in word
-				   W, find out which one, and call its
-				   handler.  */
-
-				while (! (status & 0x1)) {
-					irq++;
-					status >>= 1;
-				}
-				status &= ~0x1;
-
-				/* Recursively call handle_irq to handle it. */
-				handle_irq (irq, regs);
-				rval = IRQ_HANDLED;
-			} while (status);
-		}
-	}
-
-	/* Toggle the `all enable' bit back and forth, which should cause
-	   another edge transition if there are any other interrupts
-	   still pending, and so result in another CPU interrupt.  */
-	GBUS_INT_ENABLE (0, gint) &= ~0x1;
-	GBUS_INT_ENABLE (0, gint) |=  0x1;
-
-	return rval;
-}
-
-
-/* Initialize GBUS interrupt sources.  */
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned gbus_int_startup_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-	if (gint_num_active_irqs[gint] == 0) {
-		/* First enable the CPU interrupt.  */
-		int rval =
-			request_irq (IRQ_GINT(gint), gbus_int_handle_irq,
-				     IRQF_DISABLED,
-				     "gbus_int_handler",
-				     &gint_num_active_irqs[gint]);
-		if (rval != 0)
-			return rval;
-	}
-
-	gint_num_active_irqs[gint]++;
-
-	gbus_int_clear_pending_irq (irq);
-	gbus_int_enable_irq (irq);
-
-	return 0;
-}
-
-static void gbus_int_shutdown_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-	gbus_int_disable_irq (irq);
-
-	if (--gint_num_active_irqs[gint] == 0)
-		/* Disable the CPU interrupt.  */
-		free_irq (IRQ_GINT(gint), &gint_num_active_irqs[gint]);
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
-				     struct hw_interrupt_type *hw_irq_types)
-{
-	struct gbus_int_irq_init *init;
-	for (init = inits; init->name; init++) {
-		unsigned i;
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = gbus_int_startup_irq;
-		hwit->shutdown = gbus_int_shutdown_irq;
-		hwit->enable   = gbus_int_enable_irq;
-		hwit->disable  = gbus_int_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = irq_nop;
-		
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-		/* Set the interrupt priorities.  */
-		for (i = 0; i < init->num; i++) {
-			unsigned j;
-			for (j = 0; j < NUM_USED_GINTS; j++)
-				if (used_gint[j].priority > init->priority)
-					break;
-			/* Wherever we stopped looking is one past the
-			   GINT we want. */
-			gbus_int_gint[init->base + i * init->interval
-				      - GBUS_INT_BASE_IRQ]
-				= used_gint[j > 0 ? j - 1 : 0].gint;
-		}
-	}
-}
-
-
-/* Initialize IRQS.  */
-
-/* Chip interrupts (GINTn) shared among GBUS interrupts.  */
-static struct hw_interrupt_type gint_hw_itypes[NUM_USED_GINTS];
-
-
-/* GBUS interrupts themselves.  */
-
-struct gbus_int_irq_init gbus_irq_inits[] __initdata = {
-	/* First set defaults.  */
-	{ "GBUS_INT", IRQ_GBUS_INT(0), IRQ_GBUS_INT_NUM, 1, 6},
-	{ 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-
-/* Initialize GBUS interrupts.  */
-void __init gbus_int_init_irqs (void)
-{
-	unsigned i;
-
-	/* First initialize the shared gint interrupts.  */
-	for (i = 0; i < NUM_USED_GINTS; i++) {
-		unsigned gint = used_gint[i].gint;
-		struct v850e_intc_irq_init gint_irq_init[2];
-
-		/* We initialize one GINT interrupt at a time.  */
-		gint_irq_init[0].name = "GINT";
-		gint_irq_init[0].base = IRQ_GINT (gint);
-		gint_irq_init[0].num = 1;
-		gint_irq_init[0].interval = 1;
-		gint_irq_init[0].priority = used_gint[i].priority;
-
-		gint_irq_init[1].name = 0; /* Terminate the vector.  */
-
-		v850e_intc_init_irq_types (gint_irq_init, gint_hw_itypes);
-	}
-
-	/* Then the GBUS interrupts.  */
-	gbus_int_disable_irqs ();
-	gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-	/* Turn on the `all enable' bits, which are ANDed with
-	   individual interrupt enable bits; we only want to bother with
-	   the latter.  They are the first bit in the first word of each
-	   interrupt-enable area.  */
-	for (i = 0; i < NUM_USED_GINTS; i++)
-		GBUS_INT_ENABLE (0, used_gint[i].gint) = 0x1;
-}
diff --git a/arch/v850/kernel/head.S b/arch/v850/kernel/head.S
deleted file mode 100644
index c490b937ef14..000000000000
--- a/arch/v850/kernel/head.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/v850/kernel/head.S -- Lowest-level startup code
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/current.h>
-#include <asm/entry.h>
-#include <asm/thread_info.h>
-#include <asm/irq.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM	C_SYMBOL_NAME
-
-
-	.text
-
-	// Define `mach_early_init' as a weak symbol
-	.global	CSYM(mach_early_init)
-	.weak	CSYM(mach_early_init)
-
-C_ENTRY(start):
-	// Make sure interrupts are turned off, just in case
-	di
-
-#ifdef CONFIG_RESET_GUARD
-	// See if we got here via an unexpected reset
-	ld.w	RESET_GUARD, r19	// Check current value of reset guard
-	mov	RESET_GUARD_ACTIVE, r20
-	cmp	r19, r20
-	bne	1f			// Guard was not active
-
-	// If we get here, the reset guard was active.  Load up some
-	// interesting values as arguments, and jump to the handler.
-	st.w	r0, RESET_GUARD		// Allow further resets to succeed
-	mov	lp, r6			// Arg 0: return address
-	ld.b	KM, r7			// Arg 1: kernel mode
-	mov	sp, r9			// Arg 3: stack pointer
-	ld.w	KSP, r19		// maybe switch to kernel stack
-	cmp	r7, r0			// see if already in kernel mode
-	cmov	z, r19, sp, sp		//  and switch to kernel stack if not
-	GET_CURRENT_TASK(r8)		// Arg 2: task pointer
-	jr	CSYM(unexpected_reset)
-
-1:	st.w	r20, RESET_GUARD	// Turn on reset guard
-#endif /* CONFIG_RESET_GUARD */
-
-	// Setup a temporary stack for doing pre-initialization function calls.
-	// 
-	// We can't use the initial kernel stack, because (1) it may be
-	// located in memory we're not allowed to touch, and (2) since
-	// it's in the data segment, calling memcpy to initialize that
-	// area from ROM will overwrite memcpy's return address.
-	mov	hilo(CSYM(_init_stack_end) - 4), sp
-
-	// See if there's a platform-specific early-initialization routine
-	// defined; it's a weak symbol, so it will have an address of zero if
-	// there's not.
-	mov	hilo(CSYM(mach_early_init)), r6
-	cmp	r6, r0
-	bz	3f
-
-	// There is one, so call it.  If this function is written in C, it
-	// should be very careful -- the stack pointer is valid, but very
-	// little else is (e.g., bss is not zeroed yet, and initialized data
-	// hasn't been).
-	jarl	2f, lp			// first figure out return address
-2:	add	3f - ., lp
-	jmp	[r6]			// do call
-3:
-
-#ifdef CONFIG_ROM_KERNEL
-	// Copy the data area from ROM to RAM
-	mov	hilo(CSYM(_rom_copy_dst_start)), r6
-	mov	hilo(CSYM(_rom_copy_src_start)), r7
-	mov	hilo(CSYM(_rom_copy_dst_end)), r8
-	sub	r6, r8
-	jarl	CSYM(memcpy), lp
-#endif
-
-	// Load the initial thread's stack, and current task pointer (in r16)
-	mov	hilo(CSYM(init_thread_union)), r19
-	movea	THREAD_SIZE, r19, sp
-	ld.w	TI_TASK[r19], CURRENT_TASK
-
-#ifdef CONFIG_TIME_BOOTUP
-	/* This stuff must come after mach_early_init, because interrupts may
-	   not work until after its been called.  */
-	jarl	CSYM(highres_timer_reset), lp
-	jarl	CSYM(highres_timer_start), lp
-#endif
-
-	// Kernel stack pointer save location
-	st.w	sp, KSP
-
-	// Assert that we're in `kernel mode'
-	mov	1, r19
-	st.w	r19, KM
-
-#ifdef CONFIG_ZERO_BSS
-	// Zero bss area, since we can't rely upon any loader to do so
-	mov	hilo(CSYM(_sbss)), r6
-	mov	r0, r7
-	mov	hilo(CSYM(_ebss)), r8
-	sub	r6, r8
-	jarl	CSYM(memset), lp
-#endif
-
-	// What happens if the main kernel function returns (it shouldn't)
-	mov	hilo(CSYM(machine_halt)), lp
-
-	// Start the linux kernel.  We use an indirect jump to get extra
-	// range, because on some platforms this initial startup code
-	// (and the associated platform-specific code in mach_early_init)
-	// are located far away from the main kernel, e.g. so that they
-	// can initialize RAM first and copy the kernel or something.
-	mov	hilo(CSYM(start_kernel)), r12
-	jmp	[r12]
-C_END(start)
diff --git a/arch/v850/kernel/highres_timer.c b/arch/v850/kernel/highres_timer.c
deleted file mode 100644
index b16ad1eaf966..000000000000
--- a/arch/v850/kernel/highres_timer.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/v850/kernel/highres_timer.c -- High resolution timing routines
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/system.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/highres_timer.h>
-
-#define HIGHRES_TIMER_USEC_SHIFT   12
-
-/* Pre-calculated constant used for converting ticks to real time
-   units.  We initialize it to prevent it being put into BSS.  */
-static u32 highres_timer_usec_prescale = 1;
-
-void highres_timer_slow_tick_irq (void) __attribute__ ((noreturn));
-void highres_timer_slow_tick_irq (void)
-{
-	/* This is an interrupt handler, so it must be very careful to
-	   not to trash any registers.  At this point, the stack-pointer
-	   (r3) has been saved in the chip ram location ENTRY_SP by the
-	   interrupt vector, so we can use it as a scratch register; we
-	   must also restore it before returning.  */
-	asm ("ld.w	%0[r0], sp;"
-	     "add	1, sp;"
-	     "st.w	sp, %0[r0];"
-	     "ld.w	%1[r0], sp;" /* restore pre-irq stack-pointer */
-	     "reti"
-	     ::
-	      "i" (HIGHRES_TIMER_SLOW_TICKS_ADDR),
-	      "i" (ENTRY_SP_ADDR)
-	     : "memory");
-}
-
-void highres_timer_reset (void)
-{
-	V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT) = 0;
-	HIGHRES_TIMER_SLOW_TICKS = 0;
-}
-
-void highres_timer_start (void)
-{
-	u32 fast_tick_rate;
-
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (HIGHRES_TIMER_TIMER_D_UNIT,
-				 HIGHRES_TIMER_SLOW_TICK_RATE);
-
-	fast_tick_rate =
-		(V850E_TIMER_D_BASE_FREQ
-		 >> V850E_TIMER_D_DIVLOG2 (HIGHRES_TIMER_TIMER_D_UNIT));
-
-	/* The obvious way of calculating microseconds from fast ticks
-	   is to do:
-
-	     usec = fast_ticks * 10^6 / fast_tick_rate
-
-	   However, divisions are much slower than multiplications, and
-	   the above calculation can overflow, so we do this instead:
-
-	     usec = fast_ticks * (10^6 * 2^12 / fast_tick_rate) / 2^12
-
-           since we can pre-calculate (10^6 * (2^12 / fast_tick_rate))
-	   and use a shift for dividing by 2^12, this avoids division,
-	   and is almost as accurate (it differs by about 2 microseconds
-	   at the extreme value of the fast-tick counter's ranger).  */
-	highres_timer_usec_prescale = ((1000000 << HIGHRES_TIMER_USEC_SHIFT)
-				       / fast_tick_rate);
-
-	/* Enable the interrupt (which is hardwired to this use), and
-	   give it the highest priority.  */
-	V850E_INTC_IC (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)) = 0;
-}
-
-void highres_timer_stop (void)
-{
-	/* Stop the timer.  */
-	V850E_TIMER_D_TMCD (HIGHRES_TIMER_TIMER_D_UNIT) =
-		V850E_TIMER_D_TMCD_CAE;
-	/* Disable its interrupt, just in case.  */
-	v850e_intc_disable_irq (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT));
-}
-
-inline void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks)
-{
-	int flags;
-	u32 fast_ticks_1, fast_ticks_2, _slow_ticks;
-
-	local_irq_save (flags);
-	fast_ticks_1 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-	_slow_ticks = HIGHRES_TIMER_SLOW_TICKS;
-	fast_ticks_2 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-	local_irq_restore (flags);
-
-	if (fast_ticks_2 < fast_ticks_1)
-		_slow_ticks++;
-
-	*slow_ticks = _slow_ticks;
-	*fast_ticks = fast_ticks_2;
-}
-
-inline void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
-					    struct timeval *tv)
-{
-	unsigned long sec, sec_rem, usec;
-
-	usec = ((fast_ticks * highres_timer_usec_prescale)
-		>> HIGHRES_TIMER_USEC_SHIFT);
-
-	sec = slow_ticks / HIGHRES_TIMER_SLOW_TICK_RATE;
-	sec_rem = slow_ticks % HIGHRES_TIMER_SLOW_TICK_RATE;
-
-	usec += sec_rem * (1000000 / HIGHRES_TIMER_SLOW_TICK_RATE);
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-void highres_timer_read (struct timeval *tv)
-{
-	u32 fast_ticks, slow_ticks;
-	highres_timer_read_ticks (&slow_ticks, &fast_ticks);
-	highres_timer_ticks_to_timeval (slow_ticks, fast_ticks, tv);
-}
diff --git a/arch/v850/kernel/init_task.c b/arch/v850/kernel/init_task.c
deleted file mode 100644
index 44b274dff33f..000000000000
--- a/arch/v850/kernel/init_task.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/v850/kernel/init_task.c -- Initial task/thread structures
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-
-static struct fs_struct init_fs = INIT_FS;
-static struct signal_struct init_signals = INIT_SIGNALS (init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM (init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK (init_task);
-
-EXPORT_SYMBOL(init_task);
-
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry.
- */
-union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/v850/kernel/intv.S b/arch/v850/kernel/intv.S
deleted file mode 100644
index 671e4c6150dd..000000000000
--- a/arch/v850/kernel/intv.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * arch/v850/kernel/intv.S -- Interrupt vectors
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/entry.h>
-
-#ifdef CONFIG_V850E_HIGHRES_TIMER
-#include <asm/highres_timer.h>
-#endif
-
-/* Jump to an interrupt/trap handler.  These handlers (defined in entry.S)
-   expect the stack-pointer to be saved in ENTRY_SP, so we use sp to do an
-   indirect jump (which avoids problems when the handler is more than a signed
-   22-bit offset away).  */
-#define JUMP_TO_HANDLER(name, sp_save_loc)				      \
-	st.w	sp, sp_save_loc;					      \
-	mov	hilo(name), sp;						      \
-	jmp	[sp]
-
-
-	/* Reset vector.  */
-	.section	.intv.reset, "ax"
-	.org	0x0
-	mov	hilo(C_SYMBOL_NAME(start)), r1;
-	jmp	[r1]
-
-
-	/* Generic interrupt vectors.  */
-	.section	.intv.common, "ax"
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x10 - NMI0
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x20 - NMI1
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x30 - NMI2
-	
-	.balign	0x10
-	JUMP_TO_HANDLER (trap, ENTRY_SP)	// 0x40 - TRAP0n
-	.balign	0x10
-	JUMP_TO_HANDLER (trap, ENTRY_SP)	// 0x50 - TRAP1n
-
-	.balign	0x10
-	JUMP_TO_HANDLER (dbtrap, ENTRY_SP)	// 0x60 - Illegal op / DBTRAP insn
-
-
-	/* Hardware interrupt vectors.  */
-	.section	.intv.mach, "ax"
-	.org	0x0
-
-#if defined (CONFIG_V850E_HIGHRES_TIMER) && defined (IRQ_INTCMD)
-
-	/* Interrupts before the highres timer interrupt.  */
-	.rept	IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-	/* The highres timer interrupt.  */
-	.balign	0x10
-	JUMP_TO_HANDLER (C_SYMBOL_NAME (highres_timer_slow_tick_irq), ENTRY_SP)
-
-	/* Interrupts after the highres timer interrupt.  */
-	.rept	NUM_CPU_IRQS - IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT) - 1
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-#else /* No highres timer */
-
-	.rept	NUM_CPU_IRQS
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-#endif /* Highres timer */
diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c
deleted file mode 100644
index 858c45819aab..000000000000
--- a/arch/v850/kernel/irq.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/v850/kernel/irq.c -- High-level interrupt handling
- *
- *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1994-2000  Ralf Baechle
- *  Copyright (C) 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was was derived from the mips version, arch/mips/kernel/irq.c
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/random.h>
-#include <linux/seq_file.h>
-
-#include <asm/system.h>
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk("received IRQ %d with unknown interrupt type\n", irq);
-}
-
-volatile unsigned long irq_err_count, spurious_count;
-
-/*
- * Generic, controller-independent functions:
- */
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int irq = *(loff_t *) v;
-
-	if (irq == 0) {
-		int cpu;
-		seq_puts(p, "           ");
-		for (cpu=0; cpu < 1 /*smp_num_cpus*/; cpu++)
-			seq_printf(p, "CPU%d       ", cpu);
-		seq_putc(p, '\n');
-	}
-
-	if (irq < NR_IRQS) {
-		unsigned long flags;
-		struct irqaction *action;
-
-		spin_lock_irqsave(&irq_desc[irq].lock, flags);
-
-		action = irq_desc[irq].action;
-		if (action) {
-			int j;
-			int count = 0;
-			int num = -1;
-			const char *type_name = irq_desc[irq].chip->typename;
-
-			for (j = 0; j < NR_IRQS; j++)
-				if (irq_desc[j].chip->typename == type_name){
-					if (irq == j)
-						num = count;
-					count++;
-				}
-
-			seq_printf(p, "%3d: ",irq);
-			seq_printf(p, "%10u ", kstat_irqs(irq));
-			if (count > 1) {
-				int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
-				seq_printf(p, " %*s%d", 14 - prec,
-					   type_name, num);
-			} else
-				seq_printf(p, " %14s", type_name);
-		
-			seq_printf(p, "  %s", action->name);
-			for (action=action->next; action; action = action->next)
-				seq_printf(p, ", %s", action->name);
-			seq_putc(p, '\n');
-		}
-
-		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
-	} else if (irq == NR_IRQS)
-		seq_printf(p, "ERR: %10lu\n", irq_err_count);
-
-	return 0;
-}
-
-/* Handle interrupt IRQ.  REGS are the registers at the time of ther
-   interrupt.  */
-unsigned int handle_irq (int irq, struct pt_regs *regs)
-{
-	irq_enter();
-	__do_IRQ(irq, regs);
-	irq_exit();
-	return 1;
-}
-
-/* Initialize irq handling for IRQs.
-   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
-   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
-void __init
-init_irq_handlers (int base_irq, int num, int interval,
-		   struct hw_interrupt_type *irq_type)
-{
-	while (num-- > 0) {
-		irq_desc[base_irq].status  = IRQ_DISABLED;
-		irq_desc[base_irq].action  = NULL;
-		irq_desc[base_irq].depth   = 1;
-		irq_desc[base_irq].chip = irq_type;
-		base_irq += interval;
-	}
-}
diff --git a/arch/v850/kernel/ma.c b/arch/v850/kernel/ma.c
deleted file mode 100644
index 143774de75e1..000000000000
--- a/arch/v850/kernel/ma.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/v850/kernel/ma.c -- V850E/MA series of cpu chips
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM,	1, 2 },
-	{ "CSI", IRQ_INTCSI(0), IRQ_INTCSI_NUM,	4, 4 },
-	{ "SER", IRQ_INTSER(0), IRQ_INTSER_NUM,	4, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	4, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	4, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init ma_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void ma_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* We only know about the first two UART channels (though
-	   specific chips may have more).  */
-	if (chan < 2) {
-		unsigned bits = 0x3 << (chan * 3);
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		MA_PORT4_PMC |= bits;
-		/* Specify that we're using the UART, not the CSI device.  */
-		MA_PORT4_PFC |= bits;
-	}
-}
diff --git a/arch/v850/kernel/mach.c b/arch/v850/kernel/mach.c
deleted file mode 100644
index b9db278d2b71..000000000000
--- a/arch/v850/kernel/mach.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/v850/kernel/mach.c -- Defaults for some things defined by "mach.h"
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-/* Called with each timer tick, if non-zero.  */
-void (*mach_tick)(void) = 0;
diff --git a/arch/v850/kernel/mach.h b/arch/v850/kernel/mach.h
deleted file mode 100644
index 9e0e4816ec56..000000000000
--- a/arch/v850/kernel/mach.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/v850/kernel/mach.h -- Machine-dependent functions used by v850 port
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MACH_H__
-#define __V850_MACH_H__
-
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-
-#include <asm/ptrace.h>
-#include <asm/entry.h>
-#include <asm/clinkage.h>
-
-void mach_setup (char **cmdline);
-void mach_gettimeofday (struct timespec *tv);
-void mach_sched_init (struct irqaction *timer_action);
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len);
-void mach_init_irqs (void);
-
-/* If defined, is called very early in the kernel initialization.  The
-   stack pointer is valid, but very little has been initialized (e.g.,
-   bss is not zeroed yet) when this is called, so care must taken.  */
-void mach_early_init (void);
-
-/* If defined, called after the bootmem allocator has been initialized,
-   to allow the platform-dependent code to reserve any areas of RAM that
-   the kernel shouldn't touch.  */
-void mach_reserve_bootmem (void) __attribute__ ((__weak__));
-
-/* Called with each timer tick, if non-zero.  */
-extern void (*mach_tick) (void);
-
-/* The following establishes aliases for various mach_ functions to the
-   name by which the rest of the kernel calls them.  These statements
-   should only have an effect in the file that defines the actual functions. */
-#define MACH_ALIAS(to, from)						      \
-   asm (".global " macrology_stringify (C_SYMBOL_NAME (to)) ";"		      \
-	macrology_stringify (C_SYMBOL_NAME (to))			      \
-	" = " macrology_stringify (C_SYMBOL_NAME (from)))
-/* e.g.: MACH_ALIAS (kernel_name,	arch_spec_name);  */
-
-#endif /* __V850_MACH_H__ */
diff --git a/arch/v850/kernel/me2.c b/arch/v850/kernel/me2.c
deleted file mode 100644
index 007115dc9ce0..000000000000
--- a/arch/v850/kernel/me2.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/v850/kernel/me2.c -- V850E/ME2 chip-specific support
- *
- *  Copyright (C) 2003  NEC Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ",    0,                NUM_CPU_IRQS,      1, 7 },
-	{ "INTP",   IRQ_INTP(0),      IRQ_INTP_NUM,      1, 5 },
-	{ "CMD",    IRQ_INTCMD(0),    IRQ_INTCMD_NUM,    1, 3 },
-	{ "UBTIRE", IRQ_INTUBTIRE(0), IRQ_INTUBTIRE_NUM, 5, 4 },
-	{ "UBTIR",  IRQ_INTUBTIR(0),  IRQ_INTUBTIR_NUM,  5, 4 },
-	{ "UBTIT",  IRQ_INTUBTIT(0),  IRQ_INTUBTIT_NUM,  5, 4 },
-	{ "UBTIF",  IRQ_INTUBTIF(0),  IRQ_INTUBTIF_NUM,  5, 4 },
-	{ "UBTITO", IRQ_INTUBTITO(0), IRQ_INTUBTITO_NUM, 5, 4 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize V850E/ME2 chip interrupts.  */
-void __init me2_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	if (chan == 0) {
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		ME2_PORT1_PMC |= 0xC;
-		/* Specify that we're using the UART, not the CSI device. */
-		ME2_PORT1_PFC |= 0xC;
-	} else if (chan == 1) {
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		ME2_PORT2_PMC |= 0x6;
-		/* Specify that we're using the UART, not the CSI device. */
-		ME2_PORT2_PFC |= 0x6;
-	}
-}
diff --git a/arch/v850/kernel/memcons.c b/arch/v850/kernel/memcons.c
deleted file mode 100644
index 92f514fdcc79..000000000000
--- a/arch/v850/kernel/memcons.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * arch/v850/kernel/memcons.c -- Console I/O to a memory buffer
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-/* If this device is enabled, the linker map should define start and
-   end points for its buffer. */
-extern char memcons_output[], memcons_output_end;
-
-/* Current offset into the buffer.  */
-static unsigned long memcons_offs = 0;
-
-/* Spinlock protecting memcons_offs.  */
-static DEFINE_SPINLOCK(memcons_lock);
-
-
-static size_t write (const char *buf, size_t len)
-{
-	unsigned long flags;
-	char *point;
-
-	spin_lock_irqsave (memcons_lock, flags);
-
-	point = memcons_output + memcons_offs;
-	if (point + len >= &memcons_output_end) {
-		len = &memcons_output_end - point;
-		memcons_offs = 0;
-	} else
-		memcons_offs += len;
-
-	spin_unlock_irqrestore (memcons_lock, flags);
-
-	memcpy (point, buf, len);
-
-	return len;
-}
-
-
-/*  Low-level console. */
-
-static void memcons_write (struct console *co, const char *buf, unsigned len)
-{
-	while (len > 0)
-		len -= write (buf, len);
-}
-
-static struct tty_driver *tty_driver;
-
-static struct tty_driver *memcons_device (struct console *co, int *index)
-{
-	*index = co->index;
-	return tty_driver;
-}
-
-static struct console memcons =
-{
-    .name	= "memcons",
-    .write	= memcons_write,
-    .device	= memcons_device,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-void memcons_setup (void)
-{
-	register_console (&memcons);
-	printk (KERN_INFO "Console: static memory buffer (memcons)\n");
-}
-
-/* Higher level TTY interface.  */
-
-int memcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-int memcons_tty_write (struct tty_struct *tty, const unsigned char *buf, int len)
-{
-	return write (buf, len);
-}
-
-int memcons_tty_write_room (struct tty_struct *tty)
-{
-	return &memcons_output_end - (memcons_output + memcons_offs);
-}
-
-int memcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-	/* We have no buffer.  */
-	return 0;
-}
-
-static const struct tty_operations ops = {
-	.open = memcons_tty_open,
-	.write = memcons_tty_write,
-	.write_room = memcons_tty_write_room,
-	.chars_in_buffer = memcons_tty_chars_in_buffer,
-};
-
-int __init memcons_tty_init (void)
-{
-	int err;
-	struct tty_driver *driver = alloc_tty_driver(1);
-	if (!driver)
-		return -ENOMEM;
-
-	driver->name = "memcons";
-	driver->major = TTY_MAJOR;
-	driver->minor_start = 64;
-	driver->type = TTY_DRIVER_TYPE_SYSCONS;
-	driver->init_termios = tty_std_termios;
-	tty_set_operations(driver, &ops);
-	err = tty_register_driver(driver);
-	if (err) {
-		put_tty_driver(driver);
-		return err;
-	}
-	tty_driver = driver;
-	return 0;
-}
-__initcall (memcons_tty_init);
diff --git a/arch/v850/kernel/module.c b/arch/v850/kernel/module.c
deleted file mode 100644
index 64aeb3e37c52..000000000000
--- a/arch/v850/kernel/module.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * arch/v850/kernel/module.c -- Architecture-specific module functions
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 2001,03  Rusty Russell
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- *
- * Derived in part from arch/ppc/kernel/module.c
- */
-
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt , ...)
-#endif
-
-void *module_alloc (unsigned long size)
-{
-	return size == 0 ? 0 : vmalloc (size);
-}
-
-void module_free (struct module *mod, void *module_region)
-{
-	vfree (module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-int module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-		     struct module *mod)
-{
-	return 0;
-}
-
-/* Count how many different relocations (different symbol, different
-   addend) */
-static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
-{
-	unsigned int i, j, ret = 0;
-
-	/* Sure, this is order(n^2), but it's usually short, and not
-           time critical */
-	for (i = 0; i < num; i++) {
-		for (j = 0; j < i; j++) {
-			/* If this addend appeared before, it's
-                           already been counted */
-			if (ELF32_R_SYM(rela[i].r_info)
-			    == ELF32_R_SYM(rela[j].r_info)
-			    && rela[i].r_addend == rela[j].r_addend)
-				break;
-		}
-		if (j == i) ret++;
-	}
-	return ret;
-}
-
-/* Get the potential trampolines size required of the init and
-   non-init sections */
-static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
-				  const Elf32_Shdr *sechdrs,
-				  const char *secstrings,
-				  int is_init)
-{
-	unsigned long ret = 0;
-	unsigned i;
-
-	/* Everything marked ALLOC (this includes the exported
-           symbols) */
-	for (i = 1; i < hdr->e_shnum; i++) {
-		/* If it's called *.init*, and we're not init, we're
-                   not interested */
-		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-		    != is_init)
-			continue;
-
-		if (sechdrs[i].sh_type == SHT_RELA) {
-			DEBUGP("Found relocations in section %u\n", i);
-			DEBUGP("Ptr: %p.  Number: %u\n",
-			       (void *)hdr + sechdrs[i].sh_offset,
-			       sechdrs[i].sh_size / sizeof(Elf32_Rela));
-			ret += count_relocs((void *)hdr
-					     + sechdrs[i].sh_offset,
-					     sechdrs[i].sh_size
-					     / sizeof(Elf32_Rela))
-				* sizeof(struct v850_plt_entry);
-		}
-	}
-
-	return ret;
-}
-
-int module_frob_arch_sections(Elf32_Ehdr *hdr,
-			      Elf32_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *me)
-{
-	unsigned int i;
-
-	/* Find .plt and .pltinit sections */
-	for (i = 0; i < hdr->e_shnum; i++) {
-		if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0)
-			me->arch.init_plt_section = i;
-		else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
-			me->arch.core_plt_section = i;
-	}
-	if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
-		printk("Module doesn't contain .plt or .plt.init sections.\n");
-		return -ENOEXEC;
-	}
-
-	/* Override their sizes */
-	sechdrs[me->arch.core_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 0);
-	sechdrs[me->arch.init_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 1);
-	return 0;
-}
-
-int apply_relocate (Elf32_Shdr *sechdrs, const char *strtab,
-		    unsigned int symindex, unsigned int relsec,
-		    struct module *mod)
-{
-	printk ("Barf\n");
-	return -ENOEXEC;
-}
-
-/* Set up a trampoline in the PLT to bounce us to the distant function */
-static uint32_t do_plt_call (void *location, Elf32_Addr val,
-			     Elf32_Shdr *sechdrs, struct module *mod)
-{
-	struct v850_plt_entry *entry;
-	/* Instructions used to do the indirect jump.  */
-	uint32_t tramp[2];
-
-	/* We have to trash a register, so we assume that any control
-	   transfer more than 21-bits away must be a function call
-	   (so we can use a call-clobbered register).  */
-	tramp[0] = 0x0621 + ((val & 0xffff) << 16);   /* mov sym, r1 ... */
-	tramp[1] = ((val >> 16) & 0xffff) + 0x610000; /* ...; jmp r1 */
-
-	/* Init, or core PLT? */
-	if (location >= mod->module_core
-	    && location < mod->module_core + mod->core_size)
-		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
-	else
-		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
-
-	/* Find this entry, or if that fails, the next avail. entry */
-	while (entry->tramp[0])
-		if (entry->tramp[0] == tramp[0] && entry->tramp[1] == tramp[1])
-			return (uint32_t)entry;
-		else
-			entry++;
-
-	entry->tramp[0] = tramp[0];
-	entry->tramp[1] = tramp[1];
-
-	return (uint32_t)entry;
-}
-
-int apply_relocate_add (Elf32_Shdr *sechdrs, const char *strtab,
-			unsigned int symindex, unsigned int relsec,
-			struct module *mod)
-{
-	unsigned int i;
-	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-
-	DEBUGP ("Applying relocate section %u to %u\n", relsec,
-		sechdrs[relsec].sh_info);
-
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof (*rela); i++) {
-		/* This is where to make the change */
-		uint32_t *loc
-			= ((void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			   + rela[i].r_offset);
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		Elf32_Sym *sym
-			= ((Elf32_Sym *)sechdrs[symindex].sh_addr
-			   + ELF32_R_SYM (rela[i].r_info));
-		uint32_t val = sym->st_value + rela[i].r_addend;
-
-		switch (ELF32_R_TYPE (rela[i].r_info)) {
-		case R_V850_32:
-			/* We write two shorts instead of a long because even
-			   32-bit insns only need half-word alignment, but
-			   32-bit data writes need to be long-word aligned.  */
-			val += ((uint16_t *)loc)[0];
-			val += ((uint16_t *)loc)[1] << 16;
-			((uint16_t *)loc)[0] = val & 0xffff;
-			((uint16_t *)loc)[1] = (val >> 16) & 0xffff;
-			break;
-
-		case R_V850_22_PCREL:
-			/* Maybe jump indirectly via a PLT table entry.  */
-			if ((int32_t)(val - (uint32_t)loc) > 0x1fffff
-			    || (int32_t)(val - (uint32_t)loc) < -0x200000)
-				val = do_plt_call (loc, val, sechdrs, mod);
-
-			val -= (uint32_t)loc;
-
-			/* We write two shorts instead of a long because
-			   even 32-bit insns only need half-word alignment,
-			   but 32-bit data writes need to be long-word
-			   aligned.  */
-			((uint16_t *)loc)[0] =
-				(*(uint16_t *)loc & 0xffc0) /* opcode + reg */
-				| ((val >> 16) & 0xffc03f); /* offs high */
-			((uint16_t *)loc)[1] =
-				(val & 0xffff);		    /* offs low */
-			break;
-
-		default:
-			printk (KERN_ERR "module %s: Unknown reloc: %u\n",
-				mod->name, ELF32_R_TYPE (rela[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-
-	return 0;
-}
-
-void
-module_arch_cleanup(struct module *mod)
-{
-}
diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c
deleted file mode 100644
index e4a4b8e7d5a3..000000000000
--- a/arch/v850/kernel/process.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * arch/v850/kernel/process.c -- Arch-dependent process handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/reboot.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-extern void ret_from_fork (void);
-
-
-/* The idle loop.  */
-static void default_idle (void)
-{
-	while (! need_resched ())
-		asm ("halt; nop; nop; nop; nop; nop" ::: "cc");
-}
-
-void (*idle)(void) = default_idle;
-
-/*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-void cpu_idle (void)
-{
-	/* endless idle loop with no priority at all */
-	while (1) {
-		while (!need_resched())
-			(*idle) ();
-
-		preempt_enable_no_resched();
-		schedule();
-		preempt_disable();
-	}
-}
-
-/*
- * This is the mechanism for creating a new kernel thread.
- *
- * NOTE! Only a kernel-only process (ie the swapper or direct descendants who
- * haven't done an "execve()") should use this: it will work within a system
- * call from a "real" process, but the process memory space will not be free'd
- * until both the parent and the child have exited.
- */
-int kernel_thread (int (*fn)(void *), void *arg, unsigned long flags)
-{
-	register mm_segment_t fs = get_fs ();
-	register unsigned long syscall asm (SYSCALL_NUM);
-	register unsigned long arg0 asm (SYSCALL_ARG0);
-	register unsigned long ret asm (SYSCALL_RET);
-
-	set_fs (KERNEL_DS);
-
-	/* Clone this thread.  Note that we don't pass the clone syscall's
-	   second argument -- it's ignored for calls from kernel mode (the
-	   child's SP is always set to the top of the kernel stack).  */
-	arg0 = flags | CLONE_VM;
-	syscall = __NR_clone;
-	asm volatile ("trap " SYSCALL_SHORT_TRAP
-		      : "=r" (ret), "=r" (syscall)
-		      : "1" (syscall), "r" (arg0)
-		      : SYSCALL_SHORT_CLOBBERS);
-
-	if (ret == 0) {
-		/* In child thread, call FN and exit.  */
-		arg0 = (*fn) (arg);
-		syscall = __NR_exit;
-		asm volatile ("trap " SYSCALL_SHORT_TRAP
-			      : "=r" (ret), "=r" (syscall)
-			      : "1" (syscall), "r" (arg0)
-			      : SYSCALL_SHORT_CLOBBERS);
-	}
-
-	/* In parent.  */
-	set_fs (fs);
-
-	return ret;
-}
-
-void flush_thread (void)
-{
-	set_fs (USER_DS);
-}
-
-int copy_thread (int nr, unsigned long clone_flags,
-		 unsigned long stack_start, unsigned long stack_size,
-		 struct task_struct *p, struct pt_regs *regs)
-{
-	/* Start pushing stuff from the top of the child's kernel stack.  */
-	unsigned long orig_ksp = task_tos(p);
-	unsigned long ksp = orig_ksp;
-	/* We push two `state save' stack fames (see entry.S) on the new
-	   kernel stack:
-	     1) The innermost one is what switch_thread would have
-	        pushed, and is used when we context switch to the child
-		thread for the first time.  It's set up to return to
-		ret_from_fork in entry.S.
-	     2) The outermost one (nearest the top) is what a syscall
-	        trap would have pushed, and is set up to return to the
-		same location as the parent thread, but with a return
-		value of 0. */
-	struct pt_regs *child_switch_regs, *child_trap_regs;
-
-	/* Trap frame.  */
-	ksp -= STATE_SAVE_SIZE;
-	child_trap_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-	/* Switch frame.  */
-	ksp -= STATE_SAVE_SIZE;
-	child_switch_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-
-	/* First copy parent's register state to child.  */
-	*child_switch_regs = *regs;
-	*child_trap_regs = *regs;
-
-	/* switch_thread returns to the restored value of the lp
-	   register (r31), so we make that the place where we want to
-	   jump when the child thread begins running.  */
-	child_switch_regs->gpr[GPR_LP] = (v850_reg_t)ret_from_fork;
-
-	if (regs->kernel_mode)
-		/* Since we're returning to kernel-mode, make sure the child's
-		   stored kernel stack pointer agrees with what the actual
-		   stack pointer will be at that point (the trap return code
-		   always restores the SP, even when returning to
-		   kernel-mode).  */
-		child_trap_regs->gpr[GPR_SP] = orig_ksp;
-	else
-		/* Set the child's user-mode stack-pointer (the name
-		   `stack_start' is a misnomer, it's just the initial SP
-		   value).  */
-		child_trap_regs->gpr[GPR_SP] = stack_start;
-
-	/* Thread state for the child (everything else is on the stack).  */
-	p->thread.ksp = ksp;
-
-	return 0;
-}
-
-/*
- * sys_execve() executes a new program.
- */
-int sys_execve (char *name, char **argv, char **envp, struct pt_regs *regs)
-{
-	char *filename = getname (name);
-	int error = PTR_ERR (filename);
-
-	if (! IS_ERR (filename)) {
-		error = do_execve (filename, argv, envp, regs);
-		putname (filename);
-	}
-
-	return error;
-}
-
-
-/*
- * These bracket the sleeping functions..
- */
-#define first_sched	((unsigned long)__sched_text_start)
-#define last_sched	((unsigned long)__sched_text_end)
-
-unsigned long get_wchan (struct task_struct *p)
-{
-#if 0  /* Barf.  Figure out the stack-layout later.  XXX  */
-	unsigned long fp, pc;
-	int count = 0;
-
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	pc = thread_saved_pc (p);
-
-	/* This quite disgusting function walks up the stack, following
-	   saved return address, until it something that's out of bounds
-	   (as defined by `first_sched' and `last_sched').  It then
-	   returns the last PC that was in-bounds.  */
-	do {
-		if (fp < stack_page + sizeof (struct task_struct) ||
-		    fp >= 8184+stack_page)
-			return 0;
-		pc = ((unsigned long *)fp)[1];
-		if (pc < first_sched || pc >= last_sched)
-			return pc;
-		fp = *(unsigned long *) fp;
-	} while (count++ < 16);
-#endif
-
-	return 0;
-}
diff --git a/arch/v850/kernel/procfs.c b/arch/v850/kernel/procfs.c
deleted file mode 100644
index e433cde789b4..000000000000
--- a/arch/v850/kernel/procfs.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/v850/kernel/procfs.c -- Introspection functions for /proc filesystem
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-static int cpuinfo_print (struct seq_file *m, void *v)
-{
-	extern unsigned long loops_per_jiffy;
-	
-	seq_printf (m, "CPU-Family:	v850\nCPU-Arch:	%s\n", CPU_ARCH);
-
-#ifdef CPU_MODEL_LONG
-	seq_printf (m, "CPU-Model:	%s (%s)\n", CPU_MODEL, CPU_MODEL_LONG);
-#else
-	seq_printf (m, "CPU-Model:	%s\n", CPU_MODEL);
-#endif
-
-#ifdef CPU_CLOCK_FREQ
-	seq_printf (m, "CPU-Clock:	%ld (%ld MHz)\n",
-		    (long)CPU_CLOCK_FREQ,
-		    (long)CPU_CLOCK_FREQ / 1000000);
-#endif
-
-	seq_printf (m, "BogoMips:	%lu.%02lu\n",
-		    loops_per_jiffy/(500000/HZ),
-		    (loops_per_jiffy/(5000/HZ)) % 100);
-
-#ifdef PLATFORM_LONG
-	seq_printf (m, "Platform:	%s (%s)\n", PLATFORM, PLATFORM_LONG);
-#elif defined (PLATFORM)
-	seq_printf (m, "Platform:	%s\n", PLATFORM);
-#endif
-
-	return 0;
-}
-
-static void *cpuinfo_start (struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *cpuinfo_next (struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return cpuinfo_start (m, pos);
-}
-
-static void cpuinfo_stop (struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= cpuinfo_start,
-	.next	= cpuinfo_next,
-	.stop	= cpuinfo_stop,
-	.show	= cpuinfo_print
-};
diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c
deleted file mode 100644
index a458ac941b25..000000000000
--- a/arch/v850/kernel/ptrace.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * arch/v850/kernel/ptrace.c -- `ptrace' system call
- *
- *  Copyright (C) 2002,03,04  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04  Miles Bader <miles@gnu.org>
- *
- * Derived from arch/mips/kernel/ptrace.c:
- *
- *  Copyright (C) 1992 Ross Biro
- *  Copyright (C) Linus Torvalds
- *  Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
- *  Copyright (C) 1996 David S. Miller
- *  Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- *  Copyright (C) 1999 MIPS Technologies, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-/* Returns the address where the register at REG_OFFS in P is stashed away.  */
-static v850_reg_t *reg_save_addr (unsigned reg_offs, struct task_struct *t)
-{
-	struct pt_regs *regs;
-
-	/* Three basic cases:
-
-	   (1) A register normally saved before calling the scheduler, is
-	       available in the kernel entry pt_regs structure at the top
-	       of the kernel stack.  The kernel trap/irq exit path takes
-	       care to save/restore almost all registers for ptrace'd
-	       processes.
-
-	   (2) A call-clobbered register, where the process P entered the
-	       kernel via [syscall] trap, is not stored anywhere; that's
-	       OK, because such registers are not expected to be preserved
-	       when the trap returns anyway (so we don't actually bother to
-	       test for this case).
-
-	   (3) A few registers not used at all by the kernel, and so
-	       normally never saved except by context-switches, are in the
-	       context switch state.  */
-
-	if (reg_offs == PT_CTPC || reg_offs == PT_CTPSW || reg_offs == PT_CTBP)
-		/* Register saved during context switch.  */
-		regs = thread_saved_regs (t);
-	else
-		/* Register saved during kernel entry (or not available).  */
-		regs = task_pt_regs (t);
-
-	return (v850_reg_t *)((char *)regs + reg_offs);
-}
-
-/* Set the bits SET and clear the bits CLEAR in the v850e DIR
-   (`debug information register').  Returns the new value of DIR.  */
-static inline v850_reg_t set_dir (v850_reg_t set, v850_reg_t clear)
-{
-	register v850_reg_t rval asm ("r10");
-	register v850_reg_t arg0 asm ("r6") = set;
-	register v850_reg_t arg1 asm ("r7") = clear;
-
-	/* The dbtrap handler has exactly this functionality when called
-	   from kernel mode.  0xf840 is a `dbtrap' insn.  */
-	asm (".short 0xf840" : "=r" (rval) : "r" (arg0), "r" (arg1));
-
-	return rval;
-}
-
-/* Makes sure hardware single-stepping is (globally) enabled.
-   Returns true if successful.  */
-static inline int enable_single_stepping (void)
-{
-	static int enabled = 0;	/* Remember whether we already did it.  */
-	if (! enabled) {
-		/* Turn on the SE (`single-step enable') bit, 0x100, in the
-		   DIR (`debug information register').  This may fail if a
-		   processor doesn't support it or something.  We also try
-		   to clear bit 0x40 (`INI'), which is necessary to use the
-		   debug stuff on the v850e2; on the v850e, clearing 0x40
-		   shouldn't cause any problem.  */
-		v850_reg_t dir = set_dir (0x100, 0x40);
-		/* Make sure it really got set.  */
-		if (dir & 0x100)
-			enabled = 1;
-	}
-	return enabled;
-}
-
-/* Try to set CHILD's single-step flag to VAL.  Returns true if successful.  */
-static int set_single_step (struct task_struct *t, int val)
-{
-	v850_reg_t *psw_addr = reg_save_addr(PT_PSW, t);
-	if (val) {
-		/* Make sure single-stepping is enabled.  */
-		if (! enable_single_stepping ())
-			return 0;
-		/* Set T's single-step flag.  */
-		*psw_addr |= 0x800;
-	} else
-		*psw_addr &= ~0x800;
-	return 1;
-}
-
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
-	int rval;
-
-	switch (request) {
-		unsigned long val;
-
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		rval = generic_ptrace_peekdata(child, addr, data);
-		goto out;
-
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		rval = generic_ptrace_pokedata(child, addr, data);
-		goto out;
-
-	/* Read/write the word at location ADDR in the registers.  */
-	case PTRACE_PEEKUSR:
-	case PTRACE_POKEUSR:
-		rval = 0;
-		if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
-			/* Special requests that don't actually correspond
-			   to offsets in struct pt_regs.  */
-			if (addr == PT_TEXT_ADDR)
-				val = child->mm->start_code;
-			else if (addr == PT_DATA_ADDR)
-				val = child->mm->start_data;
-			else if (addr == PT_TEXT_LEN)
-				val = child->mm->end_code
-					- child->mm->start_code;
-			else
-				rval = -EIO;
-		} else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
-			v850_reg_t *reg_addr = reg_save_addr(addr, child);
-			if (request == PTRACE_PEEKUSR)
-				val = *reg_addr;
-			else
-				*reg_addr = data;
-		} else
-			rval = -EIO;
-
-		if (rval == 0 && request == PTRACE_PEEKUSR)
-			rval = put_user (val, (unsigned long *)data);
-		goto out;
-
-	/* Continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* Restart after a signal.  */
-	case PTRACE_CONT:
-	/* Execute a single instruction. */
-	case PTRACE_SINGLESTEP:
-		rval = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		/* Turn CHILD's single-step flag on or off.  */
-		if (! set_single_step (child, request == PTRACE_SINGLESTEP))
-			break;
-
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		child->exit_code = data;
-		wake_up_process(child);
-		rval = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		rval = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_DETACH: /* detach a process that was attached. */
-		set_single_step (child, 0);  /* Clear single-step flag */
-		rval = ptrace_detach(child, data);
-		break;
-
-	default:
-		rval = -EIO;
-		goto out;
-	}
- out:
-	return rval;
-}
-
-asmlinkage void syscall_trace(void)
-{
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
-void ptrace_disable (struct task_struct *child)
-{
-	/* nothing to do */
-}
diff --git a/arch/v850/kernel/rte_cb.c b/arch/v850/kernel/rte_cb.c
deleted file mode 100644
index 43018e1edebd..000000000000
--- a/arch/v850/kernel/rte_cb.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * include/asm-v850/rte_cb.c -- Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-static void led_tick (void);
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-#ifdef CONFIG_RTE_CB_MULTI
-extern void multi_init (void);
-#endif
-
-
-void __init rte_cb_early_init (void)
-{
-	v850e_intc_disable_irqs ();
-
-#ifdef CONFIG_RTE_CB_MULTI
-	multi_init ();
-#endif
-}
-
-void __init mach_setup (char **cmdline)
-{
-#ifdef CONFIG_RTE_MB_A_PCI
-	/* Probe for Mother-A, and print a message if we find it.  */
-	*(volatile unsigned long *)MB_A_SRAM_ADDR = 0xDEADBEEF;
-	if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0xDEADBEEF) {
-		*(volatile unsigned long *)MB_A_SRAM_ADDR = 0x12345678;
-		if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0x12345678)
-			printk (KERN_INFO
-				"          NEC SolutionGear/Midas lab"
-				" RTE-MOTHER-A motherboard\n");
-	}
-#endif /* CONFIG_RTE_MB_A_PCI */
-
-	mach_tick = led_tick;
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-/* This says `HALt.' in LEDese.  */
-static unsigned char halt_leds_msg[] = { 0x76, 0x77, 0x38, 0xF8 };
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-
-	/* Ignore all interrupts.  */
-	local_irq_disable ();
-
-	/* Write a little message.  */
-	write_leds (0, halt_leds_msg, sizeof halt_leds_msg);
-
-	/* Really halt.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-
-/* Animated LED display for timer tick.  */
-
-#define TICK_UPD_FREQ	6
-static int tick_frames[][10] = {
-	{ 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, -1 },
-	{ 0x63, 0x5c, -1 },
-	{ 0x5c, 0x00, -1 },
-	{ 0x63, 0x00, -1 },
-	{ -1 }
-};
-
-static void led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == (HZ / TICK_UPD_FREQ)) {
-		/* Which frame we're currently displaying for each digit.  */
-		static unsigned frame_nums[LED_NUM_DIGITS] = { 0 };
-		/* Display image.  */
-		static unsigned char image[LED_NUM_DIGITS] = { 0 };
-		unsigned char prev_image[LED_NUM_DIGITS];
-		int write_to_leds = 1; /* true if we should actually display */
-		int digit;
-
-		/* We check to see if the physical LEDs contains what we last
-		   wrote to them; if not, we suppress display (this is so that
-		   users can write to the LEDs, and not have their output
-		   overwritten).  As a special case, we start writing again if
-		   all the LEDs are blank, or our display image is all zeros
-		   (indicating that this is the initial update, when the actual
-		   LEDs might contain random data).  */
-		read_leds (0, prev_image, LED_NUM_DIGITS);
-		for (digit = 0; digit < LED_NUM_DIGITS; digit++)
-			if (image[digit] != prev_image[digit]
-			    && image[digit] && prev_image[digit])
-			{
-				write_to_leds = 0;
-				break;
-			}
-
-		/* Update display image.  */
-		for (digit = 0;
-		     digit < LED_NUM_DIGITS && tick_frames[digit][0] >= 0;
-		     digit++)
-		{
-			int frame = tick_frames[digit][frame_nums[digit]];
-			if (frame < 0) {
-				image[digit] = tick_frames[digit][0];
-				frame_nums[digit] = 1;
-			} else {
-				image[digit] = frame;
-				frame_nums[digit]++;
-				break;
-			}
-		}
-
-		if (write_to_leds)
-			/* Write the display image to the physical LEDs.  */
-			write_leds (0, image, LED_NUM_DIGITS);
-
-		counter = 0;
-	}
-}
-
-
-/* Mother-A interrupts.  */
-
-#ifdef CONFIG_RTE_GBUS_INT
-
-#define L GBUS_INT_PRIORITY_LOW
-#define M GBUS_INT_PRIORITY_MEDIUM
-#define H GBUS_INT_PRIORITY_HIGH
-
-static struct gbus_int_irq_init gbus_irq_inits[] = {
-#ifdef CONFIG_RTE_MB_A_PCI
-	{ "MB_A_LAN",	IRQ_MB_A_LAN,		1,		     1, L },
-	{ "MB_A_PCI1",	IRQ_MB_A_PCI1(0),	IRQ_MB_A_PCI1_NUM,   1, L },
-	{ "MB_A_PCI2",	IRQ_MB_A_PCI2(0),	IRQ_MB_A_PCI2_NUM,   1, L },
-	{ "MB_A_EXT",	IRQ_MB_A_EXT(0),	IRQ_MB_A_EXT_NUM,    1, L },
-	{ "MB_A_USB_OC",IRQ_MB_A_USB_OC(0),	IRQ_MB_A_USB_OC_NUM, 1, L },
-	{ "MB_A_PCMCIA_OC",IRQ_MB_A_PCMCIA_OC,	1,		     1, L },
-#endif
-	{ 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-#endif /* CONFIG_RTE_GBUS_INT */
-
-
-void __init rte_cb_init_irqs (void)
-{
-#ifdef CONFIG_RTE_GBUS_INT
-	gbus_int_init_irqs ();
-	gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-#endif /* CONFIG_RTE_GBUS_INT */
-}
diff --git a/arch/v850/kernel/rte_cb_leds.c b/arch/v850/kernel/rte_cb_leds.c
deleted file mode 100644
index aa47ab1dcd87..000000000000
--- a/arch/v850/kernel/rte_cb_leds.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-v850/rte_cb_leds.c -- Midas lab RTE-CB board LED device support
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-
-#include <asm/uaccess.h>
-
-#define LEDS_MINOR	169	/* Minor device number, using misc major.  */
-
-/* The actual LED hardware is write-only, so we hold the contents here too.  */
-static unsigned char leds_image[LED_NUM_DIGITS] = { 0 };
-
-/* Spinlock protecting the above leds.  */
-static DEFINE_SPINLOCK(leds_lock);
-
-/* Common body of LED read/write functions, checks POS and LEN for
-   correctness, declares a variable using IMG_DECL, initialized pointing at
-   the POS position in the LED image buffer, and and iterates COPY_EXPR
-   until BUF is equal to the last buffer position; finally, sets LEN to be
-   the amount actually copied.  IMG should be a variable declaration
-   (without an initializer or a terminating semicolon); POS, BUF, and LEN
-   should all be simple variables.  */
-#define DO_LED_COPY(img_decl, pos, buf, len, copy_expr)			\
-do {									\
-	if (pos > LED_NUM_DIGITS)					\
-		len = 0;						\
-	else {								\
-		if (pos + len > LED_NUM_DIGITS)				\
-			len = LED_NUM_DIGITS - pos;			\
-									\
-		if (len > 0) {						\
-			unsigned long _flags;				\
-			const char *_end = buf + len;			\
-			img_decl = &leds_image[pos];			\
-									\
-			spin_lock_irqsave (leds_lock, _flags);		\
-			do						\
-				(copy_expr);				\
-			while (buf != _end);				\
-			spin_unlock_irqrestore (leds_lock, _flags);	\
-		}							\
-	}								\
-} while (0)
-
-/* Read LEN bytes from LEDs at position POS, into BUF.
-   Returns actual amount read.  */
-unsigned read_leds (unsigned pos, char *buf, unsigned len)
-{
-	DO_LED_COPY (const char *img, pos, buf, len, *buf++ = *img++);
-	return len;
-}
-
-/* Write LEN bytes to LEDs at position POS, from BUF.
-   Returns actual amount written.  */
-unsigned write_leds (unsigned pos, const char *buf, unsigned len)
-{
-	/* We write the actual LED values backwards, because
-	   increasing memory addresses reflect LEDs right-to-left. */
-	volatile char *led = &LED (LED_NUM_DIGITS - pos - 1);
-	/* We invert the value written to the hardware, because 1 = off,
-	   and 0 = on.  */
-	DO_LED_COPY (char *img, pos, buf, len,
-		     *led-- = 0xFF ^ (*img++ = *buf++));
-	return len;
-}
-
-
-/* Device functions.  */
-
-static ssize_t leds_dev_read (struct file *file, char *buf, size_t len,
-			      loff_t *pos)
-{
-	char temp_buf[LED_NUM_DIGITS];
-	len = read_leds (*pos, temp_buf, len);
-	if (copy_to_user (buf, temp_buf, len))
-		return -EFAULT;
-	*pos += len;
-	return len;
-}
-
-static ssize_t leds_dev_write (struct file *file, const char *buf, size_t len,
-			       loff_t *pos)
-{
-	char temp_buf[LED_NUM_DIGITS];
-	if (copy_from_user (temp_buf, buf, min_t(size_t, len, LED_NUM_DIGITS)))
-		return -EFAULT;
-	len = write_leds (*pos, temp_buf, len);
-	*pos += len;
-	return len;
-}
-
-static loff_t leds_dev_lseek (struct file *file, loff_t offs, int whence)
-{
-	if (whence == 1)
-		offs += file->f_pos; /* relative */
-	else if (whence == 2)
-		offs += LED_NUM_DIGITS; /* end-relative */
-
-	if (offs < 0 || offs > LED_NUM_DIGITS)
-		return -EINVAL;
-
-	file->f_pos = offs;
-
-	return 0;
-}
-
-static const struct file_operations leds_fops = {
-	.read		= leds_dev_read,
-	.write		= leds_dev_write,
-	.llseek		= leds_dev_lseek
-};
-
-static struct miscdevice leds_miscdev = {
-	.name		= "leds",
-	.minor		= LEDS_MINOR,
-	.fops		= &leds_fops
-};
-
-int __init leds_dev_init (void)
-{
-	return misc_register (&leds_miscdev);
-}
-
-__initcall (leds_dev_init);
diff --git a/arch/v850/kernel/rte_cb_multi.c b/arch/v850/kernel/rte_cb_multi.c
deleted file mode 100644
index 963d55ab34cc..000000000000
--- a/arch/v850/kernel/rte_cb_multi.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-v850/rte_multi.c -- Support for Multi debugger monitor ROM
- * 	on Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-
-#include <asm/machdep.h>
-
-#define IRQ_ADDR(irq) (0x80 + (irq) * 0x10)
-
-/* A table of which interrupt vectors to install, since blindly
-   installing all of them makes the debugger stop working.  This is a
-   list of offsets in the interrupt vector area; each entry means to
-   copy that particular 16-byte vector.  An entry less than zero ends
-   the table.  */
-static long multi_intv_install_table[] = {
-	/* Trap vectors */
-	0x40, 0x50,		
-
-#ifdef CONFIG_RTE_CB_MULTI_DBTRAP
-	/* Illegal insn / dbtrap.  These are used by multi, so only handle
-	   them if configured to do so.  */
-	0x60,
-#endif
-
-	/* GINT1 - GINT3 (note, not GINT0!) */
-	IRQ_ADDR (IRQ_GINT(1)),
-	IRQ_ADDR (IRQ_GINT(2)),
-	IRQ_ADDR (IRQ_GINT(3)),
-
-	/* Timer D interrupts (up to 4 timers) */
-	IRQ_ADDR (IRQ_INTCMD(0)),
-#if IRQ_INTCMD_NUM > 1
-	IRQ_ADDR (IRQ_INTCMD(1)),
-#if IRQ_INTCMD_NUM > 2
-	IRQ_ADDR (IRQ_INTCMD(2)),
-#if IRQ_INTCMD_NUM > 3
-	IRQ_ADDR (IRQ_INTCMD(3)),
-#endif
-#endif
-#endif
-	
-	/* UART interrupts (up to 3 channels) */
-	IRQ_ADDR (IRQ_INTSER (0)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (0)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (0)), /* tx */
-#if IRQ_INTSR_NUM > 1
-	IRQ_ADDR (IRQ_INTSER (1)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (1)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (1)), /* tx */
-#if IRQ_INTSR_NUM > 2
-	IRQ_ADDR (IRQ_INTSER (2)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (2)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (2)), /* tx */
-#endif
-#endif
-
-	-1
-};
-
-/* Early initialization for kernel using Multi debugger ROM monitor.  */
-void __init multi_init (void)
-{
-	/* We're using the Multi debugger monitor, so we have to install
-	   the interrupt vectors.  The monitor doesn't allow them to be
-	   initially downloaded into their final destination because
-	   it's in the monitor's scratch-RAM area.  Unfortunately, Multi
-	   also doesn't deal correctly with ELF sections where the LMA
-	   and VMA differ -- it just ignores the LMA -- so we can't use
-	   that feature to work around the problem.  What we do instead
-	   is just put the interrupt vectors into a normal section, and
-	   do the necessary copying and relocation here.  Since the
-	   interrupt vector basically only contains `jr' instructions
-	   and no-ops, it's not that hard.  */
-	extern unsigned long _intv_load_start, _intv_start;
-	register unsigned long *src = &_intv_load_start;
-	register unsigned long *dst = (unsigned long *)INTV_BASE;
-	register unsigned long jr_fixup = (char *)&_intv_start - (char *)dst;
-	register long *ii;
-
-	/* Copy interrupt vectors as instructed by multi_intv_install_table. */
-	for (ii = multi_intv_install_table; *ii >= 0; ii++) {
-		/* Copy 16-byte interrupt vector at offset *ii.  */
-		int boffs;
-		for (boffs = 0; boffs < 0x10; boffs += sizeof *src) {
-			/* Copy a single word, fixing up the jump offs
-			   if it's a `jr' instruction.  */
-			int woffs = (*ii + boffs) / sizeof *src;
-			unsigned long word = src[woffs];
-
-			if ((word & 0xFC0) == 0x780) {
-				/* A `jr' insn, fix up its offset (and yes, the
-				   weird half-word swapping is intentional). */
-				unsigned short hi = word & 0xFFFF;
-				unsigned short lo = word >> 16;
-				unsigned long udisp22
-					= lo + ((hi & 0x3F) << 16);
-				long disp22 = (long)(udisp22 << 10) >> 10;
-
-				disp22 += jr_fixup;
-
-				hi = ((disp22 >> 16) & 0x3F) | 0x780;
-				lo = disp22 & 0xFFFF;
-
-				word = hi + (lo << 16);
-			}
-
-			dst[woffs] = word;
-		}
-	}
-}
diff --git a/arch/v850/kernel/rte_ma1_cb-rom.ld b/arch/v850/kernel/rte_ma1_cb-rom.ld
deleted file mode 100644
index 87b618f8253b..000000000000
--- a/arch/v850/kernel/rte_ma1_cb-rom.ld
+++ /dev/null
@@ -1,14 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in ROM.  */
-
-MEMORY {
-	ROM   : ORIGIN = 0x00000000, LENGTH = 0x00100000
-	/* 1MB of SRAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.c b/arch/v850/kernel/rte_ma1_cb.c
deleted file mode 100644
index 08abf3d5f8df..000000000000
--- a/arch/v850/kernel/rte_ma1_cb.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/v850/kernel/rte_ma1_cb.c -- Midas labs RTE-V850E/MA1-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/ma1.h>
-#include <asm/rte_ma1_cb.h>
-#include <asm/v850e_timer_c.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_early_init (void)
-{
-	rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-#ifdef CONFIG_RTE_CB_MULTI
-	/* Prevent the kernel from touching the monitor's scratch RAM.  */
-	reserve_bootmem(MON_SCRATCH_ADDR, MON_SCRATCH_SIZE,
-			BOOTMEM_DEFAULT);
-#endif
-
-	/* The space between SRAM and SDRAM is filled with duplicate
-	   images of SRAM.  Prevent the kernel from using them.  */
-	reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-			 SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-			 BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_ma1_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-MA1-CB connects some general-purpose I/O pins on the
-	   CPU to the RTS/CTS lines of UART 0's serial connection.
-	   I/O pins P42 and P43 are RTS and CTS respectively.  */
-	if (chan == 0) {
-		/* Put P42 & P43 in I/O port mode.  */
-		MA_PORT4_PMC &= ~0xC;
-		/* Make P42 an output, and P43 an input.  */
-		MA_PORT4_PM = (MA_PORT4_PM & ~0xC) | 0x8;
-	}
-
-	/* Do pre-configuration for the actual UART.  */
-	ma_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	unsigned tc;
-
-	/* Initialize interrupts.  */
-	ma_init_irqs ();
-	rte_cb_init_irqs ();
-
-	/* Use falling-edge-sensitivity for interrupts .  */
-	V850E_TIMER_C_SESC (0) &= ~0xC;
-	V850E_TIMER_C_SESC (1) &= ~0xF;
-
-	/* INTP000-INTP011 are shared with `Timer C', so we have to set
-	   up Timer C to pass them through as raw interrupts.  */
-	for (tc = 0; tc < 2; tc++)
-		/* Turn on the timer.  */
-		V850E_TIMER_C_TMCC0 (tc) |= V850E_TIMER_C_TMCC0_CAE;
-
-	/* Make sure the relevant port0/port1 pins are assigned
-	   interrupt duty.  We used INTP001-INTP011 (don't screw with
-	   INTP000 because the monitor uses it).  */
-	MA_PORT0_PMC |= 0x4;	/* P02 (INTP001) in IRQ mode.  */
-	MA_PORT1_PMC |= 0x6;	/* P11 (INTP010) & P12 (INTP011) in IRQ mode.*/
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.ld b/arch/v850/kernel/rte_ma1_cb.ld
deleted file mode 100644
index c8e16d16be41..000000000000
--- a/arch/v850/kernel/rte_ma1_cb.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in SDRAM, under Multi debugger.  */
-
-MEMORY {
-	/* 1MB of SRAM; we can't use the last 32KB, because it's used by
-	   the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-	/* Monitor scratch RAM; only the interrupt vectors should go here.  */
-	MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_MA1_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	/* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-	   kernel in a single ELF segment, and the Multi debugger (which
-	   we use to load the kernel) appears to have bizarre problems
-	   dealing with it.  */
-
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-
-		/* The address at which the interrupt vectors are initially
-		   loaded by the loader.  We can't load the interrupt vectors
-		   directly into their target location, because the monitor
-		   ROM for the GHS Multi debugger barfs if we try.
-		   Unfortunately, Multi also doesn't deal correctly with ELF
-		   sections where the LMA and VMA differ (it just ignores the
-		   LMA), so we can't use that feature to work around the
-		   problem!  What we do instead is just put the interrupt
-		   vectors into a normal section, and have the
-		   `mach_early_init' function for Midas boards do the
-		   necessary copying and relocation at runtime (this section
-		   basically only contains `jr' instructions, so it's not
-		   that hard).  */
-		. = ALIGN (0x10) ;
-		__intv_load_start = . ;
-		INTV_CONTENTS
-	} > KRAM
-
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c
deleted file mode 100644
index 687e367d8b64..000000000000
--- a/arch/v850/kernel/rte_mb_a_pci.c
+++ /dev/null
@@ -1,819 +0,0 @@
-/*
- * arch/v850/kernel/mb_a_pci.c -- PCI support for Midas lab RTE-MOTHER-A board
- *
- *  Copyright (C) 2001,02,03,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-
-/* __nomods_init is like __devinit, but is a no-op when modules are enabled.
-   This is used by some routines that can be called either during boot
-   or by a module.  */
-#ifdef CONFIG_MODULES
-#define __nomods_init /*nothing*/
-#else
-#define __nomods_init __devinit
-#endif
-
-/* PCI devices on the Mother-A board can only do DMA to/from the MB SRAM
-   (the RTE-V850E/MA1-CB cpu board doesn't support PCI access to
-   CPU-board memory), and since linux DMA buffers are allocated in
-   normal kernel memory, we basically have to copy DMA blocks around
-   (this is like a `bounce buffer').  When a DMA block is `mapped', we
-   allocate an identically sized block in MB SRAM, and if we're doing
-   output to the device, copy the CPU-memory block to the MB-SRAM block.
-   When an active block is `unmapped', we will copy the block back to
-   CPU memory if necessary, and then deallocate the MB SRAM block.
-   Ack.  */
-
-/* Where the motherboard SRAM is in the PCI-bus address space (the
-   first 512K of it is also mapped at PCI address 0).  */
-#define PCI_MB_SRAM_ADDR 0x800000
-
-/* Convert CPU-view MB SRAM address to/from PCI-view addresses of the
-   same memory.  */
-#define MB_SRAM_TO_PCI(mb_sram_addr) \
-   ((dma_addr_t)mb_sram_addr - MB_A_SRAM_ADDR + PCI_MB_SRAM_ADDR)
-#define PCI_TO_MB_SRAM(pci_addr)     \
-   (void *)(pci_addr - PCI_MB_SRAM_ADDR + MB_A_SRAM_ADDR)
-
-static void pcibios_assign_resources (void);
-
-struct mb_pci_dev_irq {
-	unsigned dev;		/* PCI device number */
-	unsigned irq_base;	/* First IRQ  */
-	unsigned query_pin;	/* True if we should read the device's
-				   Interrupt Pin info, and allocate
-				   interrupt IRQ_BASE + PIN.  */
-};
-
-/* PCI interrupts are mapped statically to GBUS interrupts.  */
-static struct mb_pci_dev_irq mb_pci_dev_irqs[] = {
-	/* Motherboard SB82558 ethernet controller */
-	{ 10,	IRQ_MB_A_LAN,		0 },
-	/* PCI slot 1 */
-	{ 8, 	IRQ_MB_A_PCI1(0),	1 },
-	/* PCI slot 2 */
-	{ 9, 	IRQ_MB_A_PCI2(0),	1 }
-};
-#define NUM_MB_PCI_DEV_IRQS ARRAY_SIZE(mb_pci_dev_irqs)
-
-
-/* PCI configuration primitives.  */
-
-#define CONFIG_DMCFGA(bus, devfn, offs)					\
-   (0x80000000								\
-    | ((offs) & ~0x3)							\
-    | ((devfn) << 8)							\
-    | ((bus)->number << 16))
-
-static int
-mb_pci_read (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 *rval)
-{
-	u32 addr;
-	int flags;
-
-	local_irq_save (flags);
-
-	MB_A_PCI_PCICR = 0x7;
-	MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-	addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-	switch (size) {
-	case 1:	*rval = *(volatile  u8 *)addr; break;
-	case 2:	*rval = *(volatile u16 *)addr; break;
-	case 4:	*rval = *(volatile u32 *)addr; break;
-	}
-
-        if (MB_A_PCI_PCISR & 0x2000) {
-		MB_A_PCI_PCISR = 0x2000;
-		*rval = ~0;
-        }
-
-	MB_A_PCI_DMCFGA = 0;
-
-	local_irq_restore (flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mb_pci_write (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 val)
-{
-	u32 addr;
-	int flags;
-
-	local_irq_save (flags);
-
-	MB_A_PCI_PCICR = 0x7;
-	MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-	addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-	switch (size) {
-	case 1: *(volatile  u8 *)addr = val; break;
-	case 2: *(volatile u16 *)addr = val; break;
-	case 4: *(volatile u32 *)addr = val; break;
-	}
-
-        if (MB_A_PCI_PCISR & 0x2000)
-		MB_A_PCI_PCISR = 0x2000;
-
-	MB_A_PCI_DMCFGA = 0;
-
-	local_irq_restore (flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops mb_pci_config_ops = {
-	.read	= mb_pci_read,
-	.write	= mb_pci_write,
-};
-
-
-/* PCI Initialization.  */
-
-static struct pci_bus *mb_pci_bus = 0;
-
-/* Do initial PCI setup.  */
-static int __devinit pcibios_init (void)
-{
-	u32 id = MB_A_PCI_PCIHIDR;
-	u16 vendor = id & 0xFFFF;
-	u16 device = (id >> 16) & 0xFFFF;
-
-	if (vendor == PCI_VENDOR_ID_PLX && device == PCI_DEVICE_ID_PLX_9080) {
-		printk (KERN_INFO
-			"PCI: PLX Technology PCI9080 HOST/PCI bridge\n");
-
-		MB_A_PCI_PCICR = 0x147;
-
-		MB_A_PCI_PCIBAR0 = 0x007FFF00;
-		MB_A_PCI_PCIBAR1 = 0x0000FF00;
-		MB_A_PCI_PCIBAR2 = 0x00800000;
-
-		MB_A_PCI_PCILTR = 0x20;
-
-		MB_A_PCI_PCIPBAM |= 0x3;
-
-		MB_A_PCI_PCISR =  ~0; /* Clear errors.  */
-
-		/* Reprogram the motherboard's IO/config address space,
-		   as we don't support the GCS7 address space that the
-		   default uses.  */
-
-		/* Significant address bits used for decoding PCI GCS5 space
-		   accesses.  */
-		MB_A_PCI_DMRR = ~(MB_A_PCI_MEM_SIZE - 1);
-
-		/* I don't understand this, but the SolutionGear example code
-		   uses such an offset, and it doesn't work without it.  XXX */
-#if GCS5_SIZE == 0x00800000
-#define GCS5_CFG_OFFS 0x00800000
-#else
-#define GCS5_CFG_OFFS 0
-#endif
-
-		/* Address bit values for matching.  Note that we have to give
-		   the address from the motherboard's point of view, which is
-		   different than the CPU's.  */
-		/* PCI memory space.  */
-		MB_A_PCI_DMLBAM = GCS5_CFG_OFFS + 0x0;
-		/* PCI I/O space.  */
-		MB_A_PCI_DMLBAI =
-			GCS5_CFG_OFFS + (MB_A_PCI_IO_ADDR - GCS5_ADDR);
-
-		mb_pci_bus = pci_scan_bus (0, &mb_pci_config_ops, 0);
-
-		pcibios_assign_resources ();
-	} else
-		printk (KERN_ERR "PCI: HOST/PCI bridge not found\n");
-
-	return 0;
-}
-
-subsys_initcall (pcibios_init);
-
-char __devinit *pcibios_setup (char *option)
-{
-	/* Don't handle any options. */
-	return option;
-}
-
-
-int __nomods_init pcibios_enable_device (struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because "
-			       "of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
-
-/* Resource allocation.  */
-static void __devinit pcibios_assign_resources (void)
-{
-	struct pci_dev *dev = NULL;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		unsigned di_num;
-		unsigned class = dev->class >> 8;
-
-		if (class && class != PCI_CLASS_BRIDGE_HOST) {
-			unsigned r_num;
-			for(r_num = 0; r_num < 6; r_num++) {
-				r = &dev->resource[r_num];
-				if (!r->start && r->end)
-					pci_assign_resource (dev, r_num);
-			}
-		}
-
-		/* Assign interrupts.  */
-		for (di_num = 0; di_num < NUM_MB_PCI_DEV_IRQS; di_num++) {
-			struct mb_pci_dev_irq *di = &mb_pci_dev_irqs[di_num];
-
-			if (di->dev == PCI_SLOT (dev->devfn)) {
-				unsigned irq = di->irq_base;
-
-				if (di->query_pin) {
-					/* Find out which interrupt pin
-					   this device uses (each PCI
-					   slot has 4).  */
-					u8 irq_pin;
-
-					pci_read_config_byte (dev,
-							     PCI_INTERRUPT_PIN,
-							      &irq_pin);
-
-					if (irq_pin == 0)
-						/* Doesn't use interrupts.  */ 
-						continue;
-					else
-						irq += irq_pin - 1;
-				}
-
-				pcibios_update_irq (dev, irq);
-			}
-		}
-	}
-}
-
-void __devinit pcibios_update_irq (struct pci_dev *dev, int irq)
-{
-	dev->irq = irq;
-	pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
-}
-
-void __devinit
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			struct resource *res)
-{
-	unsigned long offset = 0;
-
-	if (res->flags & IORESOURCE_IO) {
-		offset = MB_A_PCI_IO_ADDR;
-	} else if (res->flags & IORESOURCE_MEM) {
-		offset = MB_A_PCI_MEM_ADDR;
-	}
-
-	region->start = res->start - offset;
-	region->end = res->end - offset;
-}
-
-
-/* Stubs for things we don't use.  */
-
-/* Called after each bus is probed, but before its children are examined. */
-void pcibios_fixup_bus(struct pci_bus *b)
-{
-}
-
-void
-pcibios_align_resource (void *data, struct resource *res,
-			resource_size_t size, resource_size_t align)
-{
-}
-
-void pcibios_set_master (struct pci_dev *dev)
-{
-}
-
-
-/* Mother-A SRAM memory allocation.  This is a simple first-fit allocator.  */
-
-/* A memory free-list node.  */
-struct mb_sram_free_area {
-	void *mem;
-	unsigned long size;
-	struct mb_sram_free_area *next;
-};
-
-/* The tail of the free-list, which starts out containing all the SRAM.  */
-static struct mb_sram_free_area mb_sram_free_tail = {
-	(void *)MB_A_SRAM_ADDR, MB_A_SRAM_SIZE, 0
-};
-
-/* The free-list.  */
-static struct mb_sram_free_area *mb_sram_free_areas = &mb_sram_free_tail;
-
-/* The free-list of free free-list nodes. (:-)  */
-static struct mb_sram_free_area *mb_sram_free_free_areas = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(mb_sram_lock);
-
-/* Allocate a memory block at least SIZE bytes long in the Mother-A SRAM
-   space.  */
-static void *alloc_mb_sram (size_t size)
-{
-	struct mb_sram_free_area *prev, *fa;
-	unsigned long flags;
-	void *mem = 0;
-
-	spin_lock_irqsave (mb_sram_lock, flags);
-
-	/* Look for a free area that can contain SIZE bytes.  */
-	for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-		if (fa->size >= size) {
-			/* Found one!  */
-			mem = fa->mem;
-
-			if (fa->size == size) {
-				/* In fact, it fits exactly, so remove
-				   this node from the free-list.  */
-				if (prev)
-					prev->next = fa->next;
-				else
-					mb_sram_free_areas = fa->next;
-				/* Put it on the free-list-entry-free-list. */
-				fa->next = mb_sram_free_free_areas;
-				mb_sram_free_free_areas = fa;
-			} else {
-				/* FA is bigger than SIZE, so just
-				   reduce its size to account for this
-				   allocation.  */
-				fa->mem += size;
-				fa->size -= size;
-			}
-
-			break;
-		}
-
-	spin_unlock_irqrestore (mb_sram_lock, flags);
-
-	return mem;
-}
-
-/* Return the memory area MEM of size SIZE to the MB SRAM free pool.  */
-static void free_mb_sram (void *mem, size_t size)
-{
-	struct mb_sram_free_area *prev, *fa, *new_fa;
-	unsigned long flags;
-	void *end = mem + size;
-
-	spin_lock_irqsave (mb_sram_lock, flags);
-
- retry:
-	/* Find an adjacent free-list entry.  */
-	for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-		if (fa->mem == end) {
-			/* FA is just after MEM, grow down to encompass it. */
-			fa->mem = mem;
-			fa->size += size;
-			goto done;
-		} else if (fa->mem + fa->size == mem) {
-			struct mb_sram_free_area *next_fa = fa->next;
-
-			/* FA is just before MEM, expand to encompass it. */
-			fa->size += size;
-
-			/* See if FA can now be merged with its successor. */
-			if (next_fa && fa->mem + fa->size == next_fa->mem) {
-				/* Yup; merge NEXT_FA's info into FA.  */
-				fa->size += next_fa->size;
-				fa->next = next_fa->next;
-				/* Free NEXT_FA.  */
-				next_fa->next = mb_sram_free_free_areas;
-				mb_sram_free_free_areas = next_fa;
-			}
-			goto done;
-		} else if (fa->mem > mem)
-			/* We've reached the right spot in the free-list
-			   without finding an adjacent free-area, so add
-			   a new free area to hold mem. */
-			break;
-
-	/* Make a new free-list entry.  */
-
-	/* First, get a free-list entry.  */
-	if (! mb_sram_free_free_areas) {
-		/* There are none, so make some.  */
-		void *block;
-		size_t block_size = sizeof (struct mb_sram_free_area) * 8;
-
-		/* Don't hold the lock while calling kmalloc (I'm not
-		   sure whether it would be a problem, since we use
-		   GFP_ATOMIC, but it makes me nervous).  */
-		spin_unlock_irqrestore (mb_sram_lock, flags);
-
-		block = kmalloc (block_size, GFP_ATOMIC);
-		if (! block)
-			panic ("free_mb_sram: can't allocate free-list entry");
-
-		/* Now get the lock back.  */
-		spin_lock_irqsave (mb_sram_lock, flags);
-
-		/* Add the new free free-list entries.  */
-		while (block_size > 0) {
-			struct mb_sram_free_area *nfa = block;
-			nfa->next = mb_sram_free_free_areas;
-			mb_sram_free_free_areas = nfa;
-			block += sizeof *nfa;
-			block_size -= sizeof *nfa;
-		}
-
-		/* Since we dropped the lock to call kmalloc, the
-		   free-list could have changed, so retry from the
-		   beginning.  */
-		goto retry;
-	}
-
-	/* Remove NEW_FA from the free-list of free-list entries.  */
-	new_fa = mb_sram_free_free_areas;
-	mb_sram_free_free_areas = new_fa->next;
-
-	/* NEW_FA initially holds only MEM.  */
-	new_fa->mem = mem;
-	new_fa->size = size;
-
-	/* Insert NEW_FA in the free-list between PREV and FA. */
-	new_fa->next = fa;
-	if (prev)
-		prev->next = new_fa;
-	else
-		mb_sram_free_areas = new_fa;
-
- done:
-	spin_unlock_irqrestore (mb_sram_lock, flags);
-}
-
-
-/* Maintainence of CPU -> Mother-A DMA mappings.  */
-
-struct dma_mapping {
-	void *cpu_addr;
-	void *mb_sram_addr;
-	size_t size;
-	struct dma_mapping *next;
-};
-
-/* A list of mappings from CPU addresses to MB SRAM addresses for active
-   DMA blocks (that have been `granted' to the PCI device).  */
-static struct dma_mapping *active_dma_mappings = 0;
-
-/* A list of free mapping objects.  */
-static struct dma_mapping *free_dma_mappings = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(dma_mappings_lock);
-
-static struct dma_mapping *new_dma_mapping (size_t size)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping;
-	void *mb_sram_block = alloc_mb_sram (size);
-
-	if (! mb_sram_block)
-		return 0;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	if (! free_dma_mappings) {
-		/* We're out of mapping structures, make more.  */
-		void *mblock;
-		size_t mblock_size = sizeof (struct dma_mapping) * 8;
-
-		/* Don't hold the lock while calling kmalloc (I'm not
-		   sure whether it would be a problem, since we use
-		   GFP_ATOMIC, but it makes me nervous).  */
-		spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-		mblock = kmalloc (mblock_size, GFP_ATOMIC);
-		if (! mblock) {
-			free_mb_sram (mb_sram_block, size);
-			return 0;
-		}
-
-		/* Get the lock back.  */
-		spin_lock_irqsave (dma_mappings_lock, flags);
-
-		/* Add the new mapping structures to the free-list.  */
-		while (mblock_size > 0) {
-			struct dma_mapping *fm = mblock;
-			fm->next = free_dma_mappings;
-			free_dma_mappings = fm;
-			mblock += sizeof *fm;
-			mblock_size -= sizeof *fm;
-		}
-	}
-
-	/* Get a mapping struct from the freelist.  */
-	mapping = free_dma_mappings;
-	free_dma_mappings = mapping->next;
-
-	/* Initialize the mapping.  Other fields should be filled in by
-	   caller.  */
-	mapping->mb_sram_addr = mb_sram_block;
-	mapping->size = size;
-
-	/* Add it to the list of active mappings.  */
-	mapping->next = active_dma_mappings;
-	active_dma_mappings = mapping;
-
-	spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-	return mapping;
-}
-
-static struct dma_mapping *find_dma_mapping (void *mb_sram_addr)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	for (mapping = active_dma_mappings; mapping; mapping = mapping->next)
-		if (mapping->mb_sram_addr == mb_sram_addr) {
-			spin_unlock_irqrestore (dma_mappings_lock, flags);
-			return mapping;
-		}
-
-	panic ("find_dma_mapping: unmapped PCI DMA addr 0x%x",
-	       MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-static struct dma_mapping *deactivate_dma_mapping (void *mb_sram_addr)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping, *prev;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	for (prev = 0, mapping = active_dma_mappings;
-	     mapping;
-	     prev = mapping, mapping = mapping->next)
-	{
-		if (mapping->mb_sram_addr == mb_sram_addr) {
-			/* This is the MAPPING; deactivate it.  */
-			if (prev)
-				prev->next = mapping->next;
-			else
-				active_dma_mappings = mapping->next;
-
-			spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-			return mapping;
-		}
-	}
-
-	panic ("deactivate_dma_mapping: unmapped PCI DMA addr 0x%x",
-	       MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-/* Return MAPPING to the freelist.  */
-static inline void
-free_dma_mapping (struct dma_mapping *mapping)
-{
-	unsigned long flags;
-
-	free_mb_sram (mapping->mb_sram_addr, mapping->size);
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	mapping->next = free_dma_mappings;
-	free_dma_mappings = mapping;
-
-	spin_unlock_irqrestore (dma_mappings_lock, flags);
-}
-
-
-/* Single PCI DMA mappings.  */
-
-/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA.  The
-   32-bit PCI bus mastering address to use is returned.  the device owns
-   this memory until either pci_unmap_single or pci_dma_sync_single is
-   performed.  */
-dma_addr_t
-pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir)
-{
-	struct dma_mapping *mapping = new_dma_mapping (size);
-
-	if (! mapping)
-		return 0;
-
-	mapping->cpu_addr = cpu_addr;
-
-	if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_TODEVICE)
-		memcpy (mapping->mb_sram_addr, cpu_addr, size);
-
-	return MB_SRAM_TO_PCI (mapping->mb_sram_addr);
-}
-
-/* Return to the CPU the PCI DMA memory block previously `granted' to
-   PDEV, at DMA_ADDR.  */
-void pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		       int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = deactivate_dma_mapping (mb_sram_addr);
-
-	if (size != mapping->size)
-		panic ("pci_unmap_single: size (%d) doesn't match"
-		       " size of mapping at PCI DMA addr 0x%x (%d)\n",
-		       size, dma_addr, mapping->size);
-
-	/* Copy back the DMA'd contents if necessary.  */
-	if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_FROMDEVICE)
-		memcpy (mapping->cpu_addr, mb_sram_addr, size);
-
-	/* Return mapping to the freelist.  */
-	free_dma_mapping (mapping);
-}
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-void
-pci_dma_sync_single_for_cpu (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		     int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-	/* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-	if (dir == PCI_DMA_FROMDEVICE)
-		memcpy (mapping->cpu_addr, mb_sram_addr, size);
-	else if (dir == PCI_DMA_TODEVICE)
-		; /* nothing to do */
-	else
-		panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-void
-pci_dma_sync_single_for_device (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-				int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-	/* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-	if (dir == PCI_DMA_FROMDEVICE)
-		; /* nothing to do */
-	else if (dir == PCI_DMA_TODEVICE)
-		memcpy (mb_sram_addr, mapping->cpu_addr, size);
-	else
-		panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-
-/* Scatter-gather PCI DMA mappings.  */
-
-/* Do multiple DMA mappings at once.  */
-int
-pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir)
-{
-	BUG ();
-	return 0;
-}
-
-/* Unmap multiple DMA mappings at once.  */
-void
-pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,int dir)
-{
-	BUG ();
-}
-
-/* Make physical memory consistent for a set of streaming mode DMA
-   translations after a transfer.  The same as pci_dma_sync_single_* but
-   for a scatter-gather list, same rules and usage.  */
-
-void
-pci_dma_sync_sg_for_cpu (struct pci_dev *dev,
-			 struct scatterlist *sg, int sg_len,
-			 int dir)
-{
-	BUG ();
-}
-
-void
-pci_dma_sync_sg_for_device (struct pci_dev *dev,
-			    struct scatterlist *sg, int sg_len,
-			    int dir)
-{
-	BUG ();
-}
-
-
-/* PCI mem mapping.  */
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDR to the pci side dma address as well,
-   else DMA_ADDR is undefined.  */
-void *
-pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr)
-{
-	void *mb_sram_mem = alloc_mb_sram (size);
-	if (mb_sram_mem)
-		*dma_addr = MB_SRAM_TO_PCI (mb_sram_mem);
-	return mb_sram_mem;
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must be
-   the same as what as passed into pci_alloc_consistent.  References to
-   the memory and mappings associated with CPU_ADDR or DMA_ADDR past
-   this call are illegal.  */
-void
-pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
-		     dma_addr_t dma_addr)
-{
-	void *mb_sram_mem = PCI_TO_MB_SRAM (dma_addr);
-	free_mb_sram (mb_sram_mem, size);
-}
-
-
-/* iomap/iomap */
-
-void __iomem *pci_iomap (struct pci_dev *dev, int bar, unsigned long max)
-{
-	resource_size_t start = pci_resource_start (dev, bar);
-	resource_size_t len = pci_resource_len (dev, bar);
-
-	if (!start || len == 0)
-		return 0;
-
-	/* None of the ioremap functions actually do anything, other than
-	   re-casting their argument, so don't bother differentiating them.  */
-	return ioremap (start, len);
-}
-
-void pci_iounmap (struct pci_dev *dev, void __iomem *addr)
-{
-	/* nothing */
-}
-
-
-/* symbol exports (for modules) */
-
-EXPORT_SYMBOL (pci_map_single);
-EXPORT_SYMBOL (pci_unmap_single);
-EXPORT_SYMBOL (pci_alloc_consistent);
-EXPORT_SYMBOL (pci_free_consistent);
-EXPORT_SYMBOL (pci_dma_sync_single_for_cpu);
-EXPORT_SYMBOL (pci_dma_sync_single_for_device);
-EXPORT_SYMBOL (pci_iomap);
-EXPORT_SYMBOL (pci_iounmap);
diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c
deleted file mode 100644
index 46803d48dffe..000000000000
--- a/arch/v850/kernel/rte_me2_cb.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * arch/v850/kernel/rte_me2_cb.c -- Midas labs RTE-V850E/ME2-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/me2.h>
-#include <asm/rte_me2_cb.h>
-#include <asm/machdep.h>
-#include <asm/v850e_intc.h>
-#include <asm/v850e_cache.h>
-#include <asm/irq.h>
-
-#include "mach.h"
-
-extern unsigned long *_intv_start;
-extern unsigned long *_intv_end;
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-
-/* SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START 	SDRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_me2_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-V850E/ME2-CB connects some general-purpose I/O
-	   pins on the CPU to the RTS/CTS lines of UARTB channel 0's
-	   serial connection.
-	   I/O pins P21 and P22 are RTS and CTS respectively.  */
-	if (chan == 0) {
-		/* Put P21 & P22 in I/O port mode.  */
-		ME2_PORT2_PMC &= ~0x6;
-		/* Make P21 and output, and P22 an input.  */
-		ME2_PORT2_PM = (ME2_PORT2_PM & ~0xC) | 0x4;
-	}
-
-	me2_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	/* Initialize interrupts.  */
-	me2_init_irqs ();
-	rte_me2_cb_init_irqs ();
-}
-
-#ifdef CONFIG_ROM_KERNEL
-/* Initialization for kernel in ROM.  */
-static inline rom_kernel_init (void)
-{
-	/* If the kernel is in ROM, we have to copy any initialized data
-	   from ROM into RAM.  */
-	extern unsigned long _data_load_start, _sdata, _edata;
-	register unsigned long *src = &_data_load_start;
-	register unsigned long *dst = &_sdata, *end = &_edata;
-
-	while (dst != end)
-		*dst++ = *src++;
-}
-#endif /* CONFIG_ROM_KERNEL */
-
-static void install_interrupt_vectors (void)
-{
-	unsigned long *p1, *p2;
-
-	ME2_IRAMM = 0x03; /* V850E/ME2 iRAM write mode */
-
-	/* vector copy to iRAM */
-	p1 = (unsigned long *)0; /* v85x vector start */
-	p2 = (unsigned long *)&_intv_start;
-	while (p2 < (unsigned long *)&_intv_end)
-		*p1++ = *p2++;
-
-	ME2_IRAMM = 0x00; /* V850E/ME2 iRAM read mode */
-}
-
-/* CompactFlash */
-
-static void cf_power_on (void)
-{
-	/* CF card detected? */
-	if (CB_CF_STS0 & 0x0030)
-		return;
-
-	CB_CF_REG0 = 0x0002; /* reest on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0003; /* power on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0001; /* reset off */
-	mdelay (10);
-}
-
-static void cf_power_off (void)
-{
-	CB_CF_REG0 = 0x0003; /* power on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0002; /* reest on */
-	mdelay (10);
-}
-
-void __init mach_early_init (void)
-{
-	install_interrupt_vectors ();
-
-	/* CS1 SDRAM instruction cache enable */
-	v850e_cache_enable (0x04, 0x03, 0);
-
-	rte_cb_early_init ();
-
-	/* CompactFlash power on */
-	cf_power_on ();
-
-#if defined (CONFIG_ROM_KERNEL)
-	rom_kernel_init ();
-#endif
-}
-
-
-/* RTE-V850E/ME2-CB Programmable Interrupt Controller.  */
-
-static struct cb_pic_irq_init cb_pic_irq_inits[] = {
-	{ "CB_EXTTM0",       IRQ_CB_EXTTM0,       1, 1, 6 },
-	{ "CB_EXTSIO",       IRQ_CB_EXTSIO,       1, 1, 6 },
-	{ "CB_TOVER",        IRQ_CB_TOVER,        1, 1, 6 },
-	{ "CB_GINT0",        IRQ_CB_GINT0,        1, 1, 6 },
-	{ "CB_USB",          IRQ_CB_USB,          1, 1, 6 },
-	{ "CB_LANC",         IRQ_CB_LANC,         1, 1, 6 },
-	{ "CB_USB_VBUS_ON",  IRQ_CB_USB_VBUS_ON,  1, 1, 6 },
-	{ "CB_USB_VBUS_OFF", IRQ_CB_USB_VBUS_OFF, 1, 1, 6 },
-	{ "CB_EXTTM1",       IRQ_CB_EXTTM1,       1, 1, 6 },
-	{ "CB_EXTTM2",       IRQ_CB_EXTTM2,       1, 1, 6 },
-	{ 0 }
-};
-#define NUM_CB_PIC_IRQ_INITS (ARRAY_SIZE(cb_pic_irq_inits) - 1)
-
-static struct hw_interrupt_type cb_pic_hw_itypes[NUM_CB_PIC_IRQ_INITS];
-static unsigned char cb_pic_active_irqs = 0;
-
-void __init rte_me2_cb_init_irqs (void)
-{
-	cb_pic_init_irq_types (cb_pic_irq_inits, cb_pic_hw_itypes);
-
-	/* Initalize on board PIC1 (not PIC0) enable */
-	CB_PIC_INT0M  = 0x0000;
-	CB_PIC_INT1M  = 0x0000;
-	CB_PIC_INTR   = 0x0000;
-	CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-	ME2_PORT2_PMC 	 |= 0x08;	/* INTP23/SCK1 mode */
-	ME2_PORT2_PFC 	 &= ~0x08;	/* INTP23 mode */
-	ME2_INTR(2) 	 &= ~0x08;	/* INTP23 falling-edge detect */
-	ME2_INTF(2) 	 &= ~0x08;	/*   " */
-
-	rte_cb_init_irqs ();	/* gbus &c */
-}
-
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void cb_pic_enable_irq (unsigned irq)
-{
-	CB_PIC_INT1M |= 1 << (irq - CB_PIC_BASE_IRQ);
-}
-
-void cb_pic_disable_irq (unsigned irq)
-{
-	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-void cb_pic_shutdown_irq (unsigned irq)
-{
-	cb_pic_disable_irq (irq);
-
-	if (--cb_pic_active_irqs == 0)
-		free_irq (IRQ_CB_PIC, 0);
-
-	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-static irqreturn_t cb_pic_handle_irq (int irq, void *dev_id,
-				      struct pt_regs *regs)
-{
-	irqreturn_t rval = IRQ_NONE;
-	unsigned status = CB_PIC_INTR;
-	unsigned enable = CB_PIC_INT1M;
-
-	/* Only pay attention to enabled interrupts.  */
-	status &= enable;
-
-	CB_PIC_INTEN &= ~CB_PIC_INT1EN;
-
-	if (status) {
-		unsigned mask = 1;
-
-		irq = CB_PIC_BASE_IRQ;
-		do {
-			/* There's an active interrupt, find out which one,
-			   and call its handler.  */
-			while (! (status & mask)) {
-				irq++;
-				mask <<= 1;
-			}
-			status &= ~mask;
-
-			CB_PIC_INTR = mask;
-
-			/* Recursively call handle_irq to handle it. */
-			handle_irq (irq, regs);
-			rval = IRQ_HANDLED;
-		} while (status);
-	}
-
-	CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-	return rval;
-}
-
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned cb_pic_startup_irq (unsigned irq)
-{
-	int rval;
-
-	if (cb_pic_active_irqs == 0) {
-		rval = request_irq (IRQ_CB_PIC, cb_pic_handle_irq,
-				    IRQF_DISABLED, "cb_pic_handler", 0);
-		if (rval != 0)
-			return rval;
-	}
-
-	cb_pic_active_irqs++;
-
-	cb_pic_enable_irq (irq);
-
-	return 0;
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
-				   struct hw_interrupt_type *hw_irq_types)
-{
-	struct cb_pic_irq_init *init;
-	for (init = inits; init->name; init++) {
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = cb_pic_startup_irq;
-		hwit->shutdown = cb_pic_shutdown_irq;
-		hwit->enable   = cb_pic_enable_irq;
-		hwit->disable  = cb_pic_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = irq_nop;
-
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-	}
-}
diff --git a/arch/v850/kernel/rte_me2_cb.ld b/arch/v850/kernel/rte_me2_cb.ld
deleted file mode 100644
index cf0766065ec6..000000000000
--- a/arch/v850/kernel/rte_me2_cb.ld
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/ME2-CB evaluation board
-   (CONFIG_RTE_CB_ME2), with kernel in SDRAM.  */
-
-MEMORY {
-	/* 128Kbyte of IRAM */
-	IRAM : ORIGIN = 0x00000000, LENGTH = 0x00020000
-
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#define KRAM SDRAM
-
-SECTIONS {
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-		INTV_CONTENTS	/* copy to iRAM (0x0-0x620) */
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-	} > KRAM
-	
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb-multi.ld b/arch/v850/kernel/rte_nb85e_cb-multi.ld
deleted file mode 100644
index de347b4fffac..000000000000
--- a/arch/v850/kernel/rte_nb85e_cb-multi.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E), with the Multi debugger ROM monitor .  */
-
-MEMORY {
-	/* 1MB of SRAM; we can't use the last 96KB, because it's used by
-	   the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-	/* Monitor scratch RAM; only the interrupt vectors should go here.  */
-	MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-	/* 16MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	/* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-	   kernel in a single ELF segment, and the Multi debugger (which
-	   we use to load the kernel) appears to have bizarre problems
-	   dealing with it.  */
-
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-
-		/* The address at which the interrupt vectors are initially
-		   loaded by the loader.  We can't load the interrupt vectors
-		   directly into their target location, because the monitor
-		   ROM for the GHS Multi debugger barfs if we try.
-		   Unfortunately, Multi also doesn't deal correctly with ELF
-		   sections where the LMA and VMA differ (it just ignores the
-		   LMA), so we can't use that feature to work around the
-		   problem!  What we do instead is just put the interrupt
-		   vectors into a normal section, and have the
-		   `mach_early_init' function for Midas boards do the
-		   necessary copying and relocation at runtime (this section
-		   basically only contains `jr' instructions, so it's not
-		   that hard).  */
-		. = ALIGN (0x10) ;
-		__intv_load_start = . ;
-		INTV_CONTENTS
-	} > KRAM
-
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.c b/arch/v850/kernel/rte_nb85e_cb.c
deleted file mode 100644
index b4a045da5d70..000000000000
--- a/arch/v850/kernel/rte_nb85e_cb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/v850/kernel/rte_nb85e_cb.c -- Midas labs RTE-V850E/NB85E-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e.h>
-#include <asm/rte_nb85e_cb.h>
-
-#include "mach.h"
-
-void __init mach_early_init (void)
-{
-	/* Configure caching; some possible settings:
-
-	     BHC = 0x0000, DCC = 0x0000	 -- all caching disabled
-	     BHC = 0x0040, DCC = 0x0000	 -- SDRAM: icache only
-	     BHC = 0x0080, DCC = 0x0C00	 -- SDRAM: write-back dcache only
-	     BHC = 0x00C0, DCC = 0x0C00	 -- SDRAM: icache + write-back dcache
-	     BHC = 0x00C0, DCC = 0x0800	 -- SDRAM: icache + write-thru dcache
-
-	   We can only cache SDRAM (we can't use cache SRAM because it's in
-	   the same memory region as the on-chip RAM and I/O space).
-
-	   Unfortunately, the dcache seems to be buggy, so we only use the
-	   icache for now.  */
-	v850e_cache_enable (0x0040 /*BHC*/, 0x0003 /*ICC*/, 0x0000 /*DCC*/);
-
-	rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	/* We just use SDRAM here.  */
-	*ram_start = SDRAM_ADDR;
-	*ram_len = SDRAM_SIZE;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_nb85e_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-NB85E-CB connects some general-purpose I/O pins on the
-	   CPU to the RTS/CTS lines the UART's serial connection, as follows:
-	   P00 = CTS (in), P01 = DSR (in), P02 = RTS (out), P03 = DTR (out). */
-
-	TEG_PORT0_PM = 0x03;	/* P00 and P01 inputs, P02 and P03 outputs */
-	TEG_PORT0_IO = 0x03;	/* Accept input */
-
-	/* Do pre-configuration for the actual UART.  */
-	teg_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	teg_init_irqs ();
-	rte_cb_init_irqs ();
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.ld b/arch/v850/kernel/rte_nb85e_cb.ld
deleted file mode 100644
index b672f484f085..000000000000
--- a/arch/v850/kernel/rte_nb85e_cb.ld
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E).  */
-
-MEMORY {
-	LOW   : ORIGIN = 0x0,	     LENGTH = 0x00100000
-	/* 1MB of SRAM  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 16MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > LOW
-	.sram : { RAMK_KRAM_CONTENTS } > KRAM
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/setup.c b/arch/v850/kernel/setup.c
deleted file mode 100644
index a0a8456a8430..000000000000
--- a/arch/v850/kernel/setup.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * arch/v850/kernel/setup.c -- Arch-dependent initialization functions
- *
- *  Copyright (C) 2001,02,03,05,06  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05,06  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/swap.h>		/* we don't have swap, but for nr_free_pages */
-#include <linux/irq.h>
-#include <linux/reboot.h>
-#include <linux/personality.h>
-#include <linux/major.h>
-#include <linux/root_dev.h>
-#include <linux/mtd/mtd.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include "mach.h"
-
-/* These symbols are all defined in the linker map to delineate various
-   statically allocated regions of memory.  */
-
-extern char _intv_start, _intv_end;
-/* `kram' is only used if the kernel uses part of normal user RAM.  */
-extern char _kram_start __attribute__ ((__weak__));
-extern char _kram_end __attribute__ ((__weak__));
-extern char _init_start, _init_end;
-extern char _bootmap;
-extern char _stext, _etext, _sdata, _edata, _sbss, _ebss;
-/* Many platforms use an embedded root image.  */
-extern char _root_fs_image_start __attribute__ ((__weak__));
-extern char _root_fs_image_end __attribute__ ((__weak__));
-
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-/* Memory not used by the kernel.  */
-static unsigned long total_ram_pages;
-
-/* System RAM.  */
-static unsigned long ram_start = 0, ram_len = 0;
-
-
-#define ADDR_TO_PAGE_UP(x)   ((((unsigned long)x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define ADDR_TO_PAGE(x)	     (((unsigned long)x) >> PAGE_SHIFT)
-#define PAGE_TO_ADDR(x)	     (((unsigned long)x) << PAGE_SHIFT)
-
-static void init_mem_alloc (unsigned long ram_start, unsigned long ram_len);
-
-void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-
-void __init setup_arch (char **cmdline)
-{
-	/* Keep a copy of command line */
-	*cmdline = command_line;
-	memcpy (boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
-	console_verbose ();
-
-	init_mm.start_code = (unsigned long) &_stext;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) &_kram_end;
-
-	/* Find out what mem this machine has.  */
-	mach_get_physical_ram (&ram_start, &ram_len);
-	/* ... and tell the kernel about it.  */
-	init_mem_alloc (ram_start, ram_len);
-
-	printk (KERN_INFO "CPU: %s\nPlatform: %s\n",
-		CPU_MODEL_LONG, PLATFORM_LONG);
-
-	/* do machine-specific setups.  */
-	mach_setup (cmdline);
-
-#ifdef CONFIG_MTD
-	if (!ROOT_DEV && &_root_fs_image_end > &_root_fs_image_start)
-		set_mem_root (&_root_fs_image_start,
-			      &_root_fs_image_end - &_root_fs_image_start,
-			      *cmdline);
-#endif
-}
-
-void __init trap_init (void)
-{
-}
-
-#ifdef CONFIG_MTD
-
-/* From drivers/mtd/devices/slram.c */
-#define SLRAM_BLK_SZ 0x4000
-
-/* Set the root filesystem to be the given memory region.
-   Some parameter may be appended to CMD_LINE.  */
-void set_mem_root (void *addr, size_t len, char *cmd_line)
-{
-	/* Some sort of idiocy in MTD means we must supply a length that's
-	   a multiple of SLRAM_BLK_SZ.  We just round up the real length,
-	   as the file system shouldn't attempt to access anything beyond
-	   the end of the image anyway.  */
-	len = (((len - 1) + SLRAM_BLK_SZ) / SLRAM_BLK_SZ) * SLRAM_BLK_SZ;
-
-	/* The only way to pass info to the MTD slram driver is via
-	   the command line.  */
-	if (*cmd_line) {
-		cmd_line += strlen (cmd_line);
-		*cmd_line++ = ' ';
-	}
-	sprintf (cmd_line, "slram=root,0x%x,+0x%x", (u32)addr, (u32)len);
-
-	ROOT_DEV = MKDEV (MTD_BLOCK_MAJOR, 0);
-}
-#endif
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static void nmi_end (unsigned irq)
-{
-	if (irq != IRQ_NMI (0)) {
-		printk (KERN_CRIT "NMI %d is unrecoverable; restarting...",
-			irq - IRQ_NMI (0));
-		machine_restart (0);
-	}
-}
-
-static struct hw_interrupt_type nmi_irq_type = {
-	.typename = "NMI",
-	.startup = irq_zero,		/* startup */
-	.shutdown = irq_nop,		/* shutdown */
-	.enable = irq_nop,		/* enable */
-	.disable = irq_nop,		/* disable */
-	.ack = irq_nop,		/* ack */
-	.end = nmi_end,		/* end */
-};
-
-void __init init_IRQ (void)
-{
-	init_irq_handlers (0, NUM_MACH_IRQS, 1, 0);
-	init_irq_handlers (IRQ_NMI (0), NUM_NMIS, 1, &nmi_irq_type);
-	mach_init_irqs ();
-}
-
-
-void __init mem_init (void)
-{
-	max_mapnr = MAP_NR (ram_start + ram_len);
-
-	num_physpages = ADDR_TO_PAGE (ram_len);
-
-	total_ram_pages = free_all_bootmem ();
-
-	printk (KERN_INFO
-		"Memory: %luK/%luK available"
-		" (%luK kernel code, %luK data)\n",
-		PAGE_TO_ADDR (nr_free_pages()) / 1024,
-		ram_len / 1024,
-		((unsigned long)&_etext - (unsigned long)&_stext) / 1024,
-		((unsigned long)&_ebss - (unsigned long)&_sdata) / 1024);
-}
-
-void free_initmem (void)
-{
-	unsigned long ram_end = ram_start + ram_len;
-	unsigned long start = PAGE_ALIGN ((unsigned long)(&_init_start));
-
-	if (start >= ram_start && start < ram_end) {
-		unsigned long addr;
-		unsigned long end = PAGE_ALIGN ((unsigned long)(&_init_end));
-
-		if (end > ram_end)
-			end = ram_end;
-
-		printk("Freeing unused kernel memory: %ldK freed\n",
-		       (end - start) / 1024);
-
-		for (addr = start; addr < end; addr += PAGE_SIZE) {
-			struct page *page = virt_to_page (addr);
-			ClearPageReserved (page);
-			init_page_count (page);
-			__free_page (page);
-			total_ram_pages++;
-		}
-	}
-}
-
-
-/* Initialize the `bootmem allocator'.  RAM_START and RAM_LEN identify
-   what RAM may be used.  */
-static void __init
-init_bootmem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-	/* The part of the kernel that's in the same managed RAM space
-	   used for general allocation.  */
-	unsigned long kram_start = (unsigned long)&_kram_start;
-	unsigned long kram_end = (unsigned long)&_kram_end;
-	/* End of the managed RAM space.  */
-	unsigned long ram_end = ram_start + ram_len;
-	/* Address range of the interrupt vector table.  */
-	unsigned long intv_start = (unsigned long)&_intv_start;
-	unsigned long intv_end = (unsigned long)&_intv_end;
-	/* True if the interrupt vectors are in the managed RAM area.  */
-	int intv_in_ram = (intv_end > ram_start && intv_start < ram_end);
-	/* True if the interrupt vectors are inside the kernel's RAM.  */
-	int intv_in_kram = (intv_end > kram_start && intv_start < kram_end);
-	/* A pointer to an optional function that reserves platform-specific
-	   memory regions.  We declare the pointer `volatile' to avoid gcc
-	   turning the call into a static call (the problem is that since
-	   it's a weak symbol, a static call may end up trying to reference
-	   the location 0x0, which is not always reachable).  */
-	void (*volatile mrb) (void) = mach_reserve_bootmem;
-	/* The bootmem allocator's allocation bitmap.  */
-	unsigned long bootmap = (unsigned long)&_bootmap;
-	unsigned long bootmap_len;
-
-	/* Round bootmap location up to next page.  */
-	bootmap = PAGE_TO_ADDR (ADDR_TO_PAGE_UP (bootmap));
-
-	/* Initialize bootmem allocator.  */
-	bootmap_len = init_bootmem_node (NODE_DATA (0),
-					 ADDR_TO_PAGE (bootmap),
-					 ADDR_TO_PAGE (PAGE_OFFSET),
-					 ADDR_TO_PAGE (ram_end));
-
-	/* Now make the RAM actually allocatable (it starts out `reserved'). */
-	free_bootmem (ram_start, ram_len);
-
-	if (kram_end > kram_start)
-		/* Reserve the RAM part of the kernel's address space, so it
-		   doesn't get allocated.  */
-		reserve_bootmem(kram_start, kram_end - kram_start,
-				BOOTMEM_DEFAULT);
-	
-	if (intv_in_ram && !intv_in_kram)
-		/* Reserve the interrupt vector space.  */
-		reserve_bootmem(intv_start, intv_end - intv_start,
-				BOOTMEM_DEFAULT);
-
-	if (bootmap >= ram_start && bootmap < ram_end)
-		/* Reserve the bootmap space.  */
-		reserve_bootmem(bootmap, bootmap_len,
-				BOOTMEM_DEFAULT);
-
-	/* Reserve the memory used by the root filesystem image if it's
-	   in RAM.  */
-	if (&_root_fs_image_end > &_root_fs_image_start
-	    && (unsigned long)&_root_fs_image_start >= ram_start
-	    && (unsigned long)&_root_fs_image_start < ram_end)
-		reserve_bootmem ((unsigned long)&_root_fs_image_start,
-				 &_root_fs_image_end - &_root_fs_image_start,
-				 BOOTMEM_DEFAULT);
-
-	/* Let the platform-dependent code reserve some too.  */
-	if (mrb)
-		(*mrb) ();
-}
-
-/* Tell the kernel about what RAM it may use for memory allocation.  */
-static void __init
-init_mem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-	unsigned i;
-	unsigned long zones_size[MAX_NR_ZONES];
-
-	init_bootmem_alloc (ram_start, ram_len);
-
-	for (i = 0; i < MAX_NR_ZONES; i++)
-		zones_size[i] = 0;
-
-	/* We stuff all the memory into one area, which includes the
-	   initial gap from PAGE_OFFSET to ram_start.  */
-	zones_size[ZONE_DMA]
-		= ADDR_TO_PAGE (ram_len + (ram_start - PAGE_OFFSET));
-
-	/* The allocator is very picky about the address of the first
-	   allocatable page -- it must be at least as aligned as the
-	   maximum allocation -- so try to detect cases where it will get
-	   confused and signal them at compile time (this is a common
-	   problem when porting to a new platform with ).  There is a
-	   similar runtime check in free_area_init_core.  */
-#if ((PAGE_OFFSET >> PAGE_SHIFT) & ((1UL << (MAX_ORDER - 1)) - 1))
-#error MAX_ORDER is too large for given PAGE_OFFSET (use CONFIG_FORCE_MAX_ZONEORDER to change it)
-#endif
-	NODE_DATA(0)->node_mem_map = NULL;
-	free_area_init_node (0, NODE_DATA(0), zones_size,
-			     ADDR_TO_PAGE (PAGE_OFFSET), 0);
-}
-
-
-
-/* Taken from m68knommu */
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
diff --git a/arch/v850/kernel/signal.c b/arch/v850/kernel/signal.c
deleted file mode 100644
index bf166e7e762c..000000000000
--- a/arch/v850/kernel/signal.c
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- * arch/v850/kernel/signal.c -- Signal handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1999,2000,2002  Niibe Yutaka & Kaz Kojima
- *  Copyright (C) 1991,1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * 1997-11-28  Modified for POSIX.1b signals by Richard Henderson
- *
- * This file was derived from the sh version, arch/sh/kernel/signal.c
- */
-
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/tty.h>
-
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/thread_info.h>
-#include <asm/cacheflush.h>
-
-#define DEBUG_SIG 0
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
-	sigset_t saveset;
-
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->gpr[GPR_RVAL] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
-		  struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->gpr[GPR_RVAL] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset))
-			return -EINTR;
-	}
-}
-
-asmlinkage int 
-sys_sigaction(int sig, const struct old_sigaction *act,
-	      struct old_sigaction *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-asmlinkage int
-sys_sigaltstack(const stack_t *uss, stack_t *uoss,
-		struct pt_regs *regs)
-{
-	return do_sigaltstack(uss, uoss, regs->gpr[GPR_SP]);
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-struct sigframe
-{
-	struct sigcontext sc;
-	unsigned long extramask[_NSIG_WORDS-1];
-	unsigned long tramp[2];	/* signal trampoline */
-};
-
-struct rt_sigframe
-{
-	struct siginfo info;
-	struct ucontext uc;
-	unsigned long tramp[2];	/* signal trampoline */
-};
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
-{
-	unsigned int err = 0;
-
-#define COPY(x)		err |= __get_user(regs->x, &sc->regs.x)
-	COPY(gpr[0]);	COPY(gpr[1]);	COPY(gpr[2]);	COPY(gpr[3]);
-	COPY(gpr[4]);	COPY(gpr[5]);	COPY(gpr[6]);	COPY(gpr[7]);
-	COPY(gpr[8]);	COPY(gpr[9]);	COPY(gpr[10]);	COPY(gpr[11]);
-	COPY(gpr[12]);	COPY(gpr[13]);	COPY(gpr[14]);	COPY(gpr[15]);
-	COPY(gpr[16]);	COPY(gpr[17]);	COPY(gpr[18]);	COPY(gpr[19]);
-	COPY(gpr[20]);	COPY(gpr[21]);	COPY(gpr[22]);	COPY(gpr[23]);
-	COPY(gpr[24]);	COPY(gpr[25]);	COPY(gpr[26]);	COPY(gpr[27]);
-	COPY(gpr[28]);	COPY(gpr[29]);	COPY(gpr[30]);	COPY(gpr[31]);
-	COPY(pc);	COPY(psw);
-	COPY(ctpc);	COPY(ctpsw);	COPY(ctbp);
-#undef COPY
-
-	return err;
-}
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-	struct sigframe *frame = (struct sigframe *)regs->gpr[GPR_SP];
-	sigset_t set;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-	    || (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-				    sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->sc, &rval))
-		goto badframe;
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe *frame = (struct rt_sigframe *)regs->gpr[GPR_SP];
-	sigset_t set;
-	stack_t st;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
-		goto badframe;
-
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
-	/* It is more difficult to avoid calling this function than to
-	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, regs->gpr[GPR_SP]);
-
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}	
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
-		 unsigned long mask)
-{
-	int err = 0;
-
-#define COPY(x)		err |= __put_user(regs->x, &sc->regs.x)
-	COPY(gpr[0]);	COPY(gpr[1]);	COPY(gpr[2]);	COPY(gpr[3]);
-	COPY(gpr[4]);	COPY(gpr[5]);	COPY(gpr[6]);	COPY(gpr[7]);
-	COPY(gpr[8]);	COPY(gpr[9]);	COPY(gpr[10]);	COPY(gpr[11]);
-	COPY(gpr[12]);	COPY(gpr[13]);	COPY(gpr[14]);	COPY(gpr[15]);
-	COPY(gpr[16]);	COPY(gpr[17]);	COPY(gpr[18]);	COPY(gpr[19]);
-	COPY(gpr[20]);	COPY(gpr[21]);	COPY(gpr[22]);	COPY(gpr[23]);
-	COPY(gpr[24]);	COPY(gpr[25]);	COPY(gpr[26]);	COPY(gpr[27]);
-	COPY(gpr[28]);	COPY(gpr[29]);	COPY(gpr[30]);	COPY(gpr[31]);
-	COPY(pc);	COPY(psw);
-	COPY(ctpc);	COPY(ctpsw);	COPY(ctbp);
-#undef COPY
-
-	err |= __put_user(mask, &sc->oldmask);
-
-	return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
-	/* Default to using normal stack */
-	unsigned long sp = regs->gpr[GPR_SP];
-
-	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-	return (void *)((sp - frame_size) & -8UL);
-}
-
-static void setup_frame(int sig, struct k_sigaction *ka,
-			sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
-	if (_NSIG_WORDS > 1) {
-		err |= __copy_to_user(frame->extramask, &set->sig[1],
-				      sizeof(frame->extramask));
-	}
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-	} else {
-		/* Note, these encodings are _little endian_!  */
-
-		/* addi  __NR_sigreturn, r0, r12  */
-		err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-				  frame->tramp + 0);
-		/* trap 0 */
-		err |= __put_user(0x010007e0,
-				  frame->tramp + 1);
-
-		regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-		flush_cache_sigtramp (regs->gpr[GPR_LP]);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler.  */
-	regs->pc = (v850_reg_t) ka->sa.sa_handler;
-	regs->gpr[GPR_SP] = (v850_reg_t)frame;
-	/* Signal handler args:  */
-	regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-	regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->sc;/* arg 1: sigcontext */
-
-	set_fs(USER_DS);
-
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx ra=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, );
-#endif
-
-	return;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-}
-
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			   sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= copy_siginfo_to_user(&frame->info, info);
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user((void *)current->sas_ss_sp,
-			  &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->gpr[GPR_SP]),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext,
-			        regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-	} else {
-		/* Note, these encodings are _little endian_!  */
-
-		/* addi  __NR_sigreturn, r0, r12  */
-		err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-				  frame->tramp + 0);
-		/* trap 0 */
-		err |= __put_user(0x010007e0,
-				  frame->tramp + 1);
-
-		regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-		flush_cache_sigtramp (regs->gpr[GPR_LP]);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler.  */
-	regs->pc = (v850_reg_t) ka->sa.sa_handler;
-	regs->gpr[GPR_SP] = (v850_reg_t)frame;
-	/* Signal handler args:  */
-	regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-	regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->info; /* arg 1: siginfo */
-	regs->gpr[GPR_ARG2] = (v850_reg_t)&frame->uc; /* arg 2: ucontext */
-
-	set_fs(USER_DS);
-
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, regs->pr);
-#endif
-
-	return;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-}
-
-/*
- * OK, we're invoking a handler
- */	
-
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-	      sigset_t *oldset,	struct pt_regs * regs)
-{
-	/* Are we from a system call? */
-	if (PT_REGS_SYSCALL (regs)) {
-		/* If so, check system call restarting.. */
-		switch (regs->gpr[GPR_RVAL]) {
-		case -ERESTART_RESTARTBLOCK:
-			current_thread_info()->restart_block.fn =
-				do_no_restart_syscall;
-			/* fall through */
-		case -ERESTARTNOHAND:
-			regs->gpr[GPR_RVAL] = -EINTR;
-			break;
-
-		case -ERESTARTSYS:
-			if (!(ka->sa.sa_flags & SA_RESTART)) {
-				regs->gpr[GPR_RVAL] = -EINTR;
-				break;
-			}
-			/* fallthrough */
-		case -ERESTARTNOINTR:
-			regs->gpr[12] = PT_REGS_SYSCALL (regs);
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-
-		PT_REGS_SET_SYSCALL (regs, 0);
-	}
-
-	/* Set up the stack frame */
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(sig, ka, info, oldset, regs);
-	else
-		setup_frame(sig, ka, oldset, regs);
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
-{
-	siginfo_t info;
-	int signr;
-	struct k_sigaction ka;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return 1;
-
-	if (!oldset)
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
-
-	/* Did we come from a system call? */
-	if (PT_REGS_SYSCALL (regs)) {
-		int rval = (int)regs->gpr[GPR_RVAL];
-		/* Restart the system call - no handlers present */
-		if (rval == -ERESTARTNOHAND
-		    || rval == -ERESTARTSYS
-		    || rval == -ERESTARTNOINTR)
-		{
-			regs->gpr[12] = PT_REGS_SYSCALL (regs);
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-		else if (rval == -ERESTART_RESTARTBLOCK) {
-			regs->gpr[12] = __NR_restart_syscall;
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-	}
-	return 0;
-}
diff --git a/arch/v850/kernel/sim.c b/arch/v850/kernel/sim.c
deleted file mode 100644
index 467b4aa0acdd..000000000000
--- a/arch/v850/kernel/sim.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/v850/kernel/sim.c -- Machine-specific stuff for GDB v850e simulator
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/simsyscall.h>
-
-#include "mach.h"
-
-/* The name of a file containing the root filesystem.  */
-#define ROOT_FS "rootfs.image"
-
-extern void simcons_setup (void);
-extern void simcons_poll_ttys (void);
-extern void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-static int read_file (const char *name,
-		      unsigned long *addr, unsigned long *len,
-		      const char **err);
-
-void __init mach_setup (char **cmdline)
-{
-	const char *err;
-	unsigned long root_dev_addr, root_dev_len;
-
-	simcons_setup ();
-
-	printk (KERN_INFO "Reading root filesystem: %s", ROOT_FS);
-
-	if (read_file (ROOT_FS, &root_dev_addr, &root_dev_len, &err)) {
-		printk (" (size %luK)\n", root_dev_len / 1024);
-		set_mem_root ((void *)root_dev_addr, (size_t)root_dev_len,
-			      *cmdline);
-	} else
-		printk ("...%s failed!\n", err);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = RAM_ADDR;
-	*ram_len = RAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* ...do magic timer initialization?...  */
-	mach_tick = simcons_poll_ttys;
-	setup_irq (0, timer_action);
-}
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static struct hw_interrupt_type sim_irq_type = {
-	.typename = "IRQ",
-	.startup = irq_zero,		/* startup */
-	.shutdown = irq_nop,		/* shutdown */
-	.enable = irq_nop,		/* enable */
-	.disable = irq_nop,		/* disable */
-	.ack = irq_nop,		/* ack */
-	.end = irq_nop,		/* end */
-};
-
-void __init mach_init_irqs (void)
-{
-	init_irq_handlers (0, NUM_MACH_IRQS, 1, &sim_irq_type);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	long timeval[2], timezone[2];
-	int rval = V850_SIM_SYSCALL (gettimeofday, timeval, timezone);
-	if (rval == 0) {
-		tv->tv_sec = timeval[0];
-		tv->tv_nsec = timeval[1] * 1000;
-	}
-}
-
-void machine_restart (char *__unused)
-{
-	V850_SIM_SYSCALL (write, 1, "RESTART\n", 8);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_halt (void)
-{
-	V850_SIM_SYSCALL (write, 1, "HALT\n", 5);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_power_off (void)
-{
-	V850_SIM_SYSCALL (write, 1, "POWER OFF\n", 10);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-
-/* Load data from a file called NAME into ram.  The address and length
-   of the data image are returned in ADDR and LEN.  */
-static int __init
-read_file (const char *name,
-	   unsigned long *addr, unsigned long *len,
-	   const char **err)
-{
-	int rval, fd;
-	unsigned long cur, left;
-	/* Note this is not a normal stat buffer, it's an ad-hoc
-	   structure defined by the simulator.  */
-	unsigned long stat_buf[10];
-
-	/* Stat the file to find out the length.  */
-	rval = V850_SIM_SYSCALL (stat, name, stat_buf);
-	if (rval < 0) {
-		if (err) *err = "stat";
-		return 0;
-	}
-	*len = stat_buf[4];
-
-	/* Open the file; `0' is O_RDONLY.  */
-	fd = V850_SIM_SYSCALL (open, name, 0);
-	if (fd < 0) {
-		if (err) *err = "open";
-		return 0;
-	}
-
-	*addr = (unsigned long)alloc_bootmem(*len);
-	if (! *addr) {
-		V850_SIM_SYSCALL (close, fd);
-		if (err) *err = "alloc_bootmem";
-		return 0;
-	}
-
-	cur = *addr;
-	left = *len;
-	while (left > 0) {
-		int chunk = V850_SIM_SYSCALL (read, fd, cur, left);
-		if (chunk <= 0)
-			break;
-		cur += chunk;
-		left -= chunk;
-	}
-	V850_SIM_SYSCALL (close, fd);
-	if (left > 0) {
-		/* Some read failed.  */
-		free_bootmem (*addr, *len);
-		if (err) *err = "read";
-		return 0;
-	}
-
-	return 1;
-}
diff --git a/arch/v850/kernel/sim.ld b/arch/v850/kernel/sim.ld
deleted file mode 100644
index 101885f3c9f0..000000000000
--- a/arch/v850/kernel/sim.ld
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Linker script for the gdb v850e simulator (CONFIG_V850E_SIM).  */
-
-MEMORY {
-	/* Interrupt vectors.  */
-	INTV  : ORIGIN = 0x0, LENGTH = 0xe0
-	/* Main RAM.  */
-	RAM   : ORIGIN = RAM_ADDR, LENGTH = RAM_SIZE
-}
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > INTV
-	.ram : { RAMK_KRAM_CONTENTS } > RAM
-}
diff --git a/arch/v850/kernel/sim85e2.c b/arch/v850/kernel/sim85e2.c
deleted file mode 100644
index 566dde5e6070..000000000000
--- a/arch/v850/kernel/sim85e2.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/v850/kernel/sim85e2.c -- Machine-specific stuff for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-
-/* There are 4 possible areas we can use:
-
-     IRAM (1MB) is fast for instruction fetches, but slow for data
-     DRAM (1020KB) is fast for data, but slow for instructions
-     ERAM is cached, so should be fast for both insns and data
-     SDRAM is external DRAM, similar to ERAM
-*/
-
-#define INIT_MEMC_FOR_SDRAM
-#define USE_SDRAM_AREA
-#define KERNEL_IN_SDRAM_AREA
-
-#define DCACHE_MODE	V850E2_CACHE_BTSC_DCM_WT
-/*#define DCACHE_MODE	V850E2_CACHE_BTSC_DCM_WB_ALLOC*/
-
-#ifdef USE_SDRAM_AREA
-#define RAM_START 	SDRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-#else
-/* When we use DRAM, we need to account for the fact that the end of it is
-   used for R0_RAM.  */
-#define RAM_START	DRAM_ADDR
-#define RAM_END		R0_RAM_ADDR
-#endif
-
-
-extern void memcons_setup (void);
-
-
-#ifdef KERNEL_IN_SDRAM_AREA
-#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text")))
-#else
-#define EARLY_INIT_SECTION_ATTR __init
-#endif
-
-void EARLY_INIT_SECTION_ATTR mach_early_init (void)
-{
-	/* The sim85e2 simulator tracks `undefined' values, so to make
-	   debugging easier, we begin by zeroing out all otherwise
-	   undefined registers.  This is not strictly necessary.
-
-	   The registers we zero are:
-	       Every GPR except:
-	           stack-pointer (r3)
-		   task-pointer (r16)
-		   our return addr (r31)
-	       Every system register (SPR) that we know about except for
-	       the PSW (SPR 5), which we zero except for the
-	       disable-interrupts bit.
-	*/
-
-	/* GPRs */
-	asm volatile ("             mov r0, r1 ; mov r0, r2              ");
-	asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 ");
-	asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11");
-	asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15");
-	asm volatile ("             mov r0, r17; mov r0, r18; mov r0, r19");
-	asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23");
-	asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27");
-	asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30");
-
-	/* SPRs */
-	asm volatile ("ldsr r0, 0;  ldsr r0, 1;  ldsr r0, 2;  ldsr r0, 3");
-	asm volatile ("ldsr r0, 4");
-	asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */
-	asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19");
-	asm volatile ("ldsr r0, 20");
-
-
-#ifdef INIT_MEMC_FOR_SDRAM
-	/* Settings for SDRAM controller.  */
-	V850E2_VSWC   = 0x0042;
-	V850E2_BSC    = 0x9286;
-	V850E2_BCT(0) = 0xb000;	/* was: 0 */
-	V850E2_BCT(1) = 0x000b;
-	V850E2_ASC    = 0;
-	V850E2_LBS    = 0xa9aa;	/* was: 0xaaaa */
-	V850E2_LBC(0) = 0;
-	V850E2_LBC(1) = 0;	/* was: 0x3 */
-	V850E2_BCC    = 0;
-	V850E2_RFS(4) = 0x800a;	/* was: 0xf109 */
-	V850E2_SCR(4) = 0x2091;	/* was: 0x20a1 */
-	V850E2_RFS(3) = 0x800c;
-	V850E2_SCR(3) = 0x20a1;
-	V850E2_DWC(0) = 0;
-	V850E2_DWC(1) = 0;
-#endif
-
-#if 0
-#ifdef CONFIG_V850E2_SIM85E2S
-	/* Turn on the caches.  */
-	V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE;
-	V850E2_BHC  = 0x1010;
-#elif CONFIG_V850E2_SIM85E2C
-	V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0);
-	V850E2_BUSM_BHC = 0xFFFF;
-#endif
-#else
-	V850E2_BHC  = 0;
-#endif
-
-	/* Don't stop the simulator at `halt' instructions.  */
-	SIM85E2_NOTHAL = 1;
-
-	/* Ensure that the simulator halts on a panic, instead of going
-	   into an infinite loop inside the panic function.  */
-	panic_timeout = -1;
-}
-
-void __init mach_setup (char **cmdline)
-{
-	memcons_setup ();
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* The simulator actually cycles through all interrupts
-	   periodically.  We just pay attention to IRQ0, which gives us
-	   1/64 the rate of the periodic interrupts.  */
-	setup_irq (0, timer_action);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
-	{ 0 }
-};
-struct hw_interrupt_type hw_itypes[1];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-	SIM85E2_SIMFIN = 0;	/* Halt immediately.  */
-	for (;;) {}
-}
-
-void machine_restart (char *__unused)
-{
-	machine_halt ();
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
diff --git a/arch/v850/kernel/sim85e2.ld b/arch/v850/kernel/sim85e2.ld
deleted file mode 100644
index 7470fd2ffb5b..000000000000
--- a/arch/v850/kernel/sim85e2.ld
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Linker script for the sim85e2c simulator, which is a verilog simulation of
-   the V850E2 NA85E2C cpu core (CONFIG_V850E2_SIM85E2C).  */
-
-MEMORY {
-	/* 1MB of `instruction RAM', starting at 0.
-	   Instruction fetches are much faster from IRAM than from DRAM.  */
-	IRAM : ORIGIN = IRAM_ADDR, LENGTH = IRAM_SIZE
-
-	/* 1MB of `data RAM', below and contiguous with the I/O space.
-	   Data fetches are much faster from DRAM than from IRAM.  */
-	DRAM : ORIGIN = DRAM_ADDR, LENGTH = DRAM_SIZE
-
-	/* `external ram' (CS1 area), comes after IRAM.  */
-	ERAM : ORIGIN = ERAM_ADDR, LENGTH = ERAM_SIZE
-
-	/* Dynamic RAM; uses memory controller.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.iram : {
-		INTV_CONTENTS
-		*arch/v850/kernel/head.o
-		*(.early.text)
-	} > IRAM
-	.dram : {
-		_memcons_output = . ;
-		. = . + 0x8000 ;
-		_memcons_output_end = . ;
-	} > DRAM
-	.sdram : {
-		/* We stick console output into a buffer here.  */
-		RAMK_KRAM_CONTENTS
-		ROOT_FS_CONTENTS
-	} > SDRAM
-}
diff --git a/arch/v850/kernel/simcons.c b/arch/v850/kernel/simcons.c
deleted file mode 100644
index 9973596ae304..000000000000
--- a/arch/v850/kernel/simcons.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/v850/kernel/simcons.c -- Console I/O for GDB v850e simulator
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-#include <asm/poll.h>
-#include <asm/string.h>
-#include <asm/simsyscall.h>
-
-
-/*  Low-level console. */
-
-static void simcons_write (struct console *co, const char *buf, unsigned len)
-{
-	V850_SIM_SYSCALL (write, 1, buf, len);
-}
-
-static int simcons_read (struct console *co, char *buf, unsigned len)
-{
-	return V850_SIM_SYSCALL (read, 0, buf, len);
-}
-
-static struct tty_driver *tty_driver;
-static struct tty_driver *simcons_device (struct console *c, int *index)
-{
-	*index = c->index;
-	return tty_driver;
-}
-
-static struct console simcons =
-{
-    .name	= "simcons",
-    .write	= simcons_write,
-    .read	= simcons_read,
-    .device	= simcons_device,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-/* Higher level TTY interface.  */
-
-int simcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-int simcons_tty_write (struct tty_struct *tty,
-		       const unsigned char *buf, int count)
-{
-	return V850_SIM_SYSCALL (write, 1, buf, count);
-}
-
-int simcons_tty_write_room (struct tty_struct *tty)
-{
-	/* Completely arbitrary.  */
-	return 0x100000;
-}
-
-int simcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-	/* We have no buffer.  */
-	return 0;
-}
-
-static const struct tty_operations ops = {
-	.open = simcons_tty_open,
-	.write = simcons_tty_write,
-	.write_room = simcons_tty_write_room,
-	.chars_in_buffer = simcons_tty_chars_in_buffer,
-};
-
-int __init simcons_tty_init (void)
-{
-	struct tty_driver *driver = alloc_tty_driver(1);
-	int err;
-	if (!driver)
-		return -ENOMEM;
-	driver->name = "simcons";
-	driver->major = TTY_MAJOR;
-	driver->minor_start = 64;
-	driver->type = TTY_DRIVER_TYPE_SYSCONS;
-	driver->init_termios = tty_std_termios;
-	tty_set_operations(driver, &ops);
-	err = tty_register_driver(driver);
-	if (err) {
-		put_tty_driver(driver);
-		return err;
-	}
-	tty_driver = driver;
-	return 0;
-}
-/* We use `late_initcall' instead of just `__initcall' as a workaround for
-   the fact that (1) simcons_tty_init can't be called before tty_init,
-   (2) tty_init is called via `module_init', (3) if statically linked,
-   module_init == device_init, and (4) there's no ordering of init lists.
-   We can do this easily because simcons is always statically linked, but
-   other tty drivers that depend on tty_init and which must use
-   `module_init' to declare their init routines are likely to be broken.  */
-late_initcall(simcons_tty_init);
-
-/* Poll for input on the console, and if there's any, deliver it to the
-   tty driver.  */
-void simcons_poll_tty (struct tty_struct *tty)
-{
-	char buf[32];	/* Not the nicest way to do it but I need it correct first */
-	int flip = 0, send_break = 0;
-	struct pollfd pfd;
-	pfd.fd = 0;
-	pfd.events = POLLIN;
-
-	if (V850_SIM_SYSCALL (poll, &pfd, 1, 0) > 0) {
-		if (pfd.revents & POLLIN) {
-			/* Real block hardware knows the transfer size before
-			   transfer so the new tty buffering doesn't try to handle
-			   this rather weird simulator specific case well */
-			int rd = V850_SIM_SYSCALL (read, 0, buf, 32);
-			if (rd > 0) {
-				tty_insert_flip_string(tty, buf, rd);
-				flip = 1;
-			} else
-				send_break = 1;
-		} else if (pfd.revents & POLLERR)
-			send_break = 1;
-	}
-
-	if (send_break) {
-		tty_insert_flip_char (tty, 0, TTY_BREAK);		
-		flip = 1;
-	}
-
-	if (flip)
-		tty_schedule_flip (tty);
-}
-
-void simcons_poll_ttys (void)
-{
-	if (tty_driver && tty_driver->ttys[0])
-		simcons_poll_tty (tty_driver->ttys[0]);
-}
-
-void simcons_setup (void)
-{
-	V850_SIM_SYSCALL (make_raw, 0);
-	register_console (&simcons);
-	printk (KERN_INFO "Console: GDB V850E simulator stdio\n");
-}
diff --git a/arch/v850/kernel/syscalls.c b/arch/v850/kernel/syscalls.c
deleted file mode 100644
index 1a83daf8e24f..000000000000
--- a/arch/v850/kernel/syscalls.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * arch/v850/kernel/syscalls.c -- Various system-call definitions not
- * 	defined in machine-independent code
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was derived the ppc version, arch/ppc/kernel/syscalls.c
- * ... which was derived from "arch/i386/kernel/sys_i386.c" by Gary Thomas;
- *     modified by Cort Dougan (cort@cs.nmt.edu)
- *     and Paul Mackerras (paulus@cs.anu.edu.au).
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/syscalls.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/mman.h>
-#include <linux/sys.h>
-#include <linux/ipc.h>
-#include <linux/utsname.h>
-#include <linux/file.h>
-
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-int
-sys_ipc (uint call, int first, int second, int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -EINVAL;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semop (first, (struct sembuf *)ptr, second);
-		break;
-	case SEMGET:
-		ret = sys_semget (first, second, third);
-		break;
-	case SEMCTL:
-	{
-		union semun fourth;
-
-		if (!ptr)
-			break;
-		if ((ret = access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-		    || (ret = get_user(fourth.__pad, (void **)ptr)))
-			break;
-		ret = sys_semctl (first, second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd (first, (struct msgbuf *) ptr, second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			if (!ptr)
-				break;
-			if ((ret = access_ok(VERIFY_READ, ptr, sizeof(tmp)) ? 0 : -EFAULT)
-			    || (ret = copy_from_user(&tmp,
-						(struct ipc_kludge *) ptr,
-						sizeof (tmp))))
-				break;
-			ret = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp,
-					  third);
-			break;
-			}
-		default:
-			ret = sys_msgrcv (first, (struct msgbuf *) ptr,
-					  second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget ((key_t) first, second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl (first, second, (struct msqid_ds *) ptr);
-		break;
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-
-			if ((ret = access_ok(VERIFY_WRITE, (ulong*) third,
-					       sizeof(ulong)) ? 0 : -EFAULT))
-				break;
-			ret = do_shmat (first, (char *) ptr, second, &raddr);
-			if (ret)
-				break;
-			ret = put_user (raddr, (ulong *) third);
-			break;
-			}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				break;
-			ret = do_shmat (first, (char *) ptr, second,
-					 (ulong *) third);
-			break;
-		}
-		break;
-	case SHMDT: 
-		ret = sys_shmdt ((char *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget (first, second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl (first, second, (struct shmid_ds *) ptr);
-		break;
-	}
-
-	return ret;
-}
-
-static inline unsigned long
-do_mmap2 (unsigned long addr, size_t len,
-	 unsigned long prot, unsigned long flags,
-	 unsigned long fd, unsigned long pgoff)
-{
-	struct file * file = NULL;
-	int ret = -EBADF;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (! (flags & MAP_ANONYMOUS)) {
-		if (!(file = fget (fd)))
-			goto out;
-	}
-	
-	down_write (&current->mm->mmap_sem);
-	ret = do_mmap_pgoff (file, addr, len, prot, flags, pgoff);
-	up_write (&current->mm->mmap_sem);
-	if (file)
-		fput (file);
-out:
-	return ret;
-}
-
-unsigned long sys_mmap2 (unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff)
-{
-	return do_mmap2 (addr, len, prot, flags, fd, pgoff);
-}
-
-unsigned long sys_mmap (unsigned long addr, size_t len,
-		       unsigned long prot, unsigned long flags,
-		       unsigned long fd, off_t offset)
-{
-	int err = -EINVAL;
-
-	if (offset & ~PAGE_MASK)
-		goto out;
-
-	err = do_mmap2 (addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
-out:
-	return err;
-}
-
-/*
- * Do a system call from kernel instead of calling sys_execve so we
- * end up with proper pt_regs.
- */
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
-{
-	register char *__a __asm__ ("r6") = filename;
-	register void *__b __asm__ ("r7") = argv;
-	register void *__c __asm__ ("r8") = envp;
-	register unsigned long __syscall __asm__ ("r12") = __NR_execve;
-	register unsigned long __ret __asm__ ("r10");
-	__asm__ __volatile__ ("trap 0"
-			: "=r" (__ret), "=r" (__syscall)
-			: "1" (__syscall), "r" (__a), "r" (__b), "r" (__c)
-			: "r1", "r5", "r11", "r13", "r14",
-			  "r15", "r16", "r17", "r18", "r19");
-	return __ret;
-}
diff --git a/arch/v850/kernel/teg.c b/arch/v850/kernel/teg.c
deleted file mode 100644
index 699248f92aae..000000000000
--- a/arch/v850/kernel/teg.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/v850/kernel/teg.c -- NB85E-TEG cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Select timer interrupt instead of external pin.  */
-	TEG_ISS |= 0x1;
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0,		NUM_CPU_IRQS,	1, 7 },
-	{ "CMD", IRQ_INTCMD(0),	IRQ_INTCMD_NUM,	1, 5 },
-	{ "SER", IRQ_INTSER(0),	IRQ_INTSER_NUM,	1, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM,	1, 4 },
-	{ "ST",	 IRQ_INTST(0),	IRQ_INTST_NUM,	1, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init teg_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void teg_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* Enable UART I/O pins instead of external interrupt pins, and
-	   UART interrupts instead of external pin interrupts.  */
-	TEG_ISS |= 0x4E;
-}
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
deleted file mode 100644
index d810c93fe665..000000000000
--- a/arch/v850/kernel/time.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/arch/v850/kernel/time.c -- Arch-dependent timer functions
- *
- *  Copyright (C) 1991, 1992, 1995, 2001, 2002  Linus Torvalds
- *
- * This file contains the v850-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-
-#include "mach.h"
-
-#define TICK_SIZE	(tick_nsec / 1000)
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static irqreturn_t timer_interrupt (int irq, void *dummy, struct pt_regs *regs)
-{
-#if 0
-	/* last time the cmos clock got updated */
-	static long last_rtc_update=0;
-#endif
-
-	/* may need to kick the hardware timer */
-	if (mach_tick)
-	  mach_tick ();
-
-	do_timer (1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	profile_tick(CPU_PROFILING, regs);
-#if 0
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-	  if (set_rtc_mmss (xtime.tv_sec) == 0)
-	    last_rtc_update = xtime.tv_sec;
-	  else
-	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-#ifdef CONFIG_HEARTBEAT
-	/* use power LED as a heartbeat instead -- much more useful
-	   for debugging -- based on the version for PReP by Cort */
-	/* acts like an actual heart beat -- ie thump-thump-pause... */
-	if (mach_heartbeat) {
-	    static unsigned cnt = 0, period = 0, dist = 0;
-
-	    if (cnt == 0 || cnt == dist)
-		mach_heartbeat ( 1 );
-	    else if (cnt == 7 || cnt == dist+7)
-		mach_heartbeat ( 0 );
-
-	    if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	    }
-	}
-#endif /* CONFIG_HEARTBEAT */
-#endif /* 0 */
-
-	return IRQ_HANDLED;
-}
-
-static int timer_dev_id;
-static struct irqaction timer_irqaction = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "timer",
-	.dev_id = &timer_dev_id,
-};
-
-void time_init (void)
-{
-	mach_gettimeofday (&xtime);
-	mach_sched_init (&timer_irqaction);
-}
diff --git a/arch/v850/kernel/v850_ksyms.c b/arch/v850/kernel/v850_ksyms.c
deleted file mode 100644
index 8d386a5dbc4a..000000000000
--- a/arch/v850/kernel/v850_ksyms.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <linux/module.h>
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-
-#include <asm/pgalloc.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/checksum.h>
-#include <asm/current.h>
-
-
-extern void *trap_table;
-EXPORT_SYMBOL (trap_table);
-
-/* platform dependent support */
-EXPORT_SYMBOL (kernel_thread);
-EXPORT_SYMBOL (__bug);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL (csum_partial_copy_nocheck);
-EXPORT_SYMBOL (csum_partial_copy_from_user);
-EXPORT_SYMBOL (ip_compute_csum);
-EXPORT_SYMBOL (ip_fast_csum);
-
-/* string / mem functions */
-EXPORT_SYMBOL (memset);
-EXPORT_SYMBOL (memcpy);
-EXPORT_SYMBOL (memmove);
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3 (void);
-extern void __ashrdi3 (void);
-extern void __lshrdi3 (void);
-extern void __muldi3 (void);
-extern void __negdi2 (void);
-
-EXPORT_SYMBOL (__ashldi3);
-EXPORT_SYMBOL (__ashrdi3);
-EXPORT_SYMBOL (__lshrdi3);
-EXPORT_SYMBOL (__muldi3);
-EXPORT_SYMBOL (__negdi2);
diff --git a/arch/v850/kernel/v850e2_cache.c b/arch/v850/kernel/v850e2_cache.c
deleted file mode 100644
index 4570312c689c..000000000000
--- a/arch/v850/kernel/v850e2_cache.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * arch/v850/kernel/v850e2_cache.c -- Cache control for V850E2 cache
- * 	memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-
-#include <asm/v850e2_cache.h>
-
-/* Cache operations we can do.  The encoding corresponds directly to the
-   value we need to write into the COPR register.  */
-enum cache_op {
-	OP_SYNC_IF_DIRTY 	   = V850E2_CACHE_COPR_CFC(0), /* 000 */
-	OP_SYNC_IF_VALID 	   = V850E2_CACHE_COPR_CFC(1), /* 001 */
-	OP_SYNC_IF_VALID_AND_CLEAR = V850E2_CACHE_COPR_CFC(3), /* 011 */
-	OP_WAY_CLEAR 		   = V850E2_CACHE_COPR_CFC(4), /* 100 */
-	OP_FILL 		   = V850E2_CACHE_COPR_CFC(5), /* 101 */
-	OP_CLEAR 		   = V850E2_CACHE_COPR_CFC(6), /* 110 */
-	OP_CREATE_DIRTY 	   = V850E2_CACHE_COPR_CFC(7)  /* 111 */
-};
-
-/* Which cache to use.  This encoding also corresponds directly to the
-   value we need to write into the COPR register. */
-enum cache {
-	ICACHE = 0,
-	DCACHE = V850E2_CACHE_COPR_LBSL
-};
-
-/* Returns ADDR rounded down to the beginning of its cache-line.  */
-#define CACHE_LINE_ADDR(addr)  \
-   ((addr) & ~(V850E2_CACHE_LINE_SIZE - 1))
-/* Returns END_ADDR rounded up to the `limit' of its cache-line.  */
-#define CACHE_LINE_END_ADDR(end_addr)  \
-   CACHE_LINE_ADDR(end_addr + (V850E2_CACHE_LINE_SIZE - 1))
-
-
-/* Low-level cache ops.  */
-
-/* Apply cache-op OP to all entries in CACHE.  */
-static inline void cache_op_all (enum cache_op op, enum cache cache)
-{
-	int cmd = op | cache | V850E2_CACHE_COPR_WSLE | V850E2_CACHE_COPR_STRT;
-
-	if (op != OP_WAY_CLEAR) {
-		/* The WAY_CLEAR operation does the whole way, but other
-		   ops take begin-index and count params; we just indicate
-		   the entire cache.  */
-		V850E2_CACHE_CADL = 0;
-		V850E2_CACHE_CADH = 0;
-		V850E2_CACHE_CCNT = V850E2_CACHE_WAY_SIZE - 1;
-	}
-
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(0); /* way 0 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(1); /* way 1 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(2); /* way 2 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(3); /* way 3 */
-}
-
-/* Apply cache-op OP to all entries in CACHE covering addresses ADDR
-   through ADDR+LEN.  */
-static inline void cache_op_range (enum cache_op op, u32 addr, u32 len,
-				   enum cache cache)
-{
-	u32 start = CACHE_LINE_ADDR (addr);
-	u32 end = CACHE_LINE_END_ADDR (addr + len);
-	u32 num_lines = (end - start) >> V850E2_CACHE_LINE_SIZE_BITS;
-
-	V850E2_CACHE_CADL = start & 0xFFFF;
-	V850E2_CACHE_CADH = start >> 16;
-	V850E2_CACHE_CCNT = num_lines - 1;
-
-	V850E2_CACHE_COPR = op | cache | V850E2_CACHE_COPR_STRT;
-}
-
-
-/* High-level ops.  */
-
-static void cache_exec_after_store_all (void)
-{
-	cache_op_all (OP_SYNC_IF_DIRTY, DCACHE);
-	cache_op_all (OP_WAY_CLEAR, ICACHE);
-}
-
-static void cache_exec_after_store_range (u32 start, u32 len)
-{
-	cache_op_range (OP_SYNC_IF_DIRTY, start, len, DCACHE);
-	cache_op_range (OP_CLEAR, start, len, ICACHE);
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-	cache_exec_after_store_all ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-	cache_exec_after_store_range (start, end - start);
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-	cache_exec_after_store_range (page_to_virt (page), PAGE_SIZE);
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-			      unsigned long addr, int len)
-{
-	cache_exec_after_store_range (addr, len);
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-	/* For the exact size, see signal.c, but 16 bytes should be enough.  */
-	cache_exec_after_store_range (addr, 16);
-}
diff --git a/arch/v850/kernel/v850e_cache.c b/arch/v850/kernel/v850e_cache.c
deleted file mode 100644
index ea3e51cfb259..000000000000
--- a/arch/v850/kernel/v850e_cache.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * arch/v850/kernel/v850e_cache.c -- Cache control for V850E cache memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This file implements cache control for the rather simple cache used on
-   some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
-   CPU.  V850E2 processors have their own (better) cache
-   implementation.  */
-
-#include <asm/entry.h>
-#include <asm/cacheflush.h>
-#include <asm/v850e_cache.h>
-
-#define WAIT_UNTIL_CLEAR(value) while (value) {}
-
-/* Set caching params via the BHC and DCC registers.  */
-void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc)
-{
-	unsigned long *r0_ram = (unsigned long *)R0_RAM_ADDR;
-	register u16 bhc_val asm ("r6") = bhc;
-
-	/* Read the instruction cache control register (ICC) and confirm
-	   that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-	V850E_CACHE_ICC = icc;
-
-#ifdef V850E_CACHE_DCC
-	/* Configure data-cache.  */
-	V850E_CACHE_DCC = dcc;
-#endif /* V850E_CACHE_DCC */
-
-	/* Configure caching for various memory regions by writing the BHC
-	   register.  The documentation says that an instruction _cannot_
-	   enable/disable caching for the memory region in which the
-	   instruction itself exists; to work around this, we store
-	   appropriate instructions into the on-chip RAM area (which is never
-	   cached), and briefly jump there to do the work.  */
-#ifdef V850E_CACHE_WRITE_IBS
-	*r0_ram++ 	= 0xf0720760;	/* st.h r0, 0xfffff072[r0] */
-#endif
-	*r0_ram++ 	= 0xf06a3760;	/* st.h r6, 0xfffff06a[r0] */
-	*r0_ram 	= 0x5640006b;	/* jmp [r11] */
-
-	asm ("mov hilo(1f), r11; jmp [%1]; 1:;"
-	     :: "r" (bhc_val), "r" (R0_RAM_ADDR) : "r11");
-}
-
-static void clear_icache (void)
-{
-	/* 1. Read the instruction cache control register (ICC) and confirm
-	      that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-	/* 2. Read the ICC register and confirm that bit 12 (LOCK0) is
-  	      cleared.  Bit 13 of the ICC register is always cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x1000);
-
-	/* 3. Set the TCLR0 and TCLR1 bits of the ICC register as follows,
-	      when clearing way 0 and way 1 at the same time:
-	        (a) Set the TCLR0 and TCLR1 bits.
-		(b) Read the TCLR0 and TCLR1 bits to confirm that these bits
-		    are cleared.
-		(c) Perform (a) and (b) above again.  */
-	V850E_CACHE_ICC |= 0x3;
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-#ifdef V850E_CACHE_REPEAT_ICC_WRITE
-	/* Do it again.  */
-	V850E_CACHE_ICC |= 0x3;
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-#endif
-}
-
-#ifdef V850E_CACHE_DCC
-/* Flush or clear (or both) the data cache, depending on the value of FLAGS;
-   the procedure is the same for both, just the control bits used differ (and
-   both may be performed simultaneously).  */
-static void dcache_op (unsigned short flags)
-{
-	/* 1. Read the data cache control register (DCC) and confirm that bits
-	      0, 1, 4, and 5 (DC00, DC01, DC04, DC05) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & 0x33);
-
-	/* 2. Clear DCC register bit 12 (DC12), bit 13 (DC13), or both
-	      depending on the way for which tags are to be cleared.  */
-	V850E_CACHE_DCC &= ~0xC000;
-
-	/* 3. Set DCC register bit 0 (DC00), bit 1 (DC01) or both depending on
-	      the way for which tags are to be cleared.
-	      ...
-	      Set DCC register bit 4 (DC04), bit 5 (DC05), or both depending
-	      on the way to be data flushed.  */
-	V850E_CACHE_DCC |= flags;
-
-	/* 4. Read DCC register bit DC00, DC01 [DC04, DC05], or both depending
-	      on the way for which tags were cleared [flushed] and confirm
-	      that that bit is cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & flags);
-}
-#endif /* V850E_CACHE_DCC */
-
-/* Flushes the contents of the dcache to memory.  */
-static inline void flush_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if in write-back mode.  */
-	if (V850E_CACHE_DCC & 0x0400)
-		dcache_op (0x30);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Flushes the contents of the dcache to memory, and then clears it.  */
-static inline void clear_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if the dcache is enabled.  */
-	if (V850E_CACHE_DCC & 0x0C00)
-		dcache_op (0x33);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Clears the dcache without flushing to memory first.  */
-static inline void clear_dcache_no_flush (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if the dcache is enabled.  */
-	if (V850E_CACHE_DCC & 0x0C00)
-		dcache_op (0x3);
-#endif /* V850E_CACHE_DCC */
-}
-
-static inline void cache_exec_after_store (void)
-{
-	flush_dcache ();
-	clear_icache ();
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-			      unsigned long adr, int len)
-{
-	cache_exec_after_store ();
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-	cache_exec_after_store ();
-}
diff --git a/arch/v850/kernel/v850e_intc.c b/arch/v850/kernel/v850e_intc.c
deleted file mode 100644
index 8d39a52ee6d1..000000000000
--- a/arch/v850/kernel/v850e_intc.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/v850/kernel/v850e_intc.c -- V850E interrupt controller (INTC)
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/v850e_intc.h>
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned v850e_intc_irq_startup (unsigned irq)
-{
-	v850e_intc_clear_pending_irq (irq);
-	v850e_intc_enable_irq (irq);
-	return 0;
-}
-
-static void v850e_intc_end_irq (unsigned irq)
-{
-	unsigned long psw, temp;
-
-	/* Clear the highest-level bit in the In-service priority register
-	   (ISPR), to allow this interrupt (or another of the same or
-	   lesser priority) to happen again.
-
-	   The `reti' instruction normally does this automatically when the
-	   PSW bits EP and NP are zero, but we can't always rely on reti
-	   being used consistently to return after an interrupt (another
-	   process can be scheduled, for instance, which can delay the
-	   associated reti for a long time, or this process may be being
-	   single-stepped, which uses the `dbret' instruction to return
-	   from the kernel).
-
-	   We also set the PSW EP bit, which prevents reti from also
-	   trying to modify the ISPR itself.  */
-
-	/* Get PSW and disable interrupts.  */
-	asm volatile ("stsr psw, %0; di" : "=r" (psw));
-	/* We don't want to do anything for NMIs (they don't use the ISPR).  */
-	if (! (psw & 0xC0)) {
-		/* Transition to `trap' state, so that an eventual real
-		   reti instruction won't modify the ISPR.  */
-		psw |= 0x40;
-		/* Fake an interrupt return, which automatically clears the
-		   appropriate bit in the ISPR.  */
-		asm volatile ("mov hilo(1f), %0;"
-			      "ldsr %0, eipc; ldsr %1, eipsw;"
-			      "reti;"
-			      "1:"
-			      : "=&r" (temp) : "r" (psw));
-	}
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
-				       struct hw_interrupt_type *hw_irq_types)
-{
-	struct v850e_intc_irq_init *init;
-	for (init = inits; init->name; init++) {
-		unsigned i;
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = v850e_intc_irq_startup;
-		hwit->shutdown = v850e_intc_disable_irq;
-		hwit->enable   = v850e_intc_enable_irq;
-		hwit->disable  = v850e_intc_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = v850e_intc_end_irq;
-		
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-		/* Set the interrupt priorities.  */
-		for (i = 0; i < init->num; i++) {
-			unsigned irq = init->base + i * init->interval;
-
-			/* If the interrupt is currently enabled (all
-			   interrupts are initially disabled), then
-			   assume whoever enabled it has set things up
-			   properly, and avoid messing with it.  */
-			if (! v850e_intc_irq_enabled (irq))
-				/* This write also (1) disables the
-				   interrupt, and (2) clears any pending
-				   interrupts.  */
-				V850E_INTC_IC (irq)
-					= (V850E_INTC_IC_PR (init->priority)
-					   | V850E_INTC_IC_MK);
-		}
-	}
-}
diff --git a/arch/v850/kernel/v850e_timer_d.c b/arch/v850/kernel/v850e_timer_d.c
deleted file mode 100644
index d2a4ece2574c..000000000000
--- a/arch/v850/kernel/v850e_timer_d.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_d.c -- `Timer D' component often used
- *	with V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-
-#include <asm/v850e_utils.h>
-#include <asm/v850e_timer_d.h>
-
-/* Start interval timer TIMER (0-3).  The timer will issue the
-   corresponding INTCMD interrupt RATE times per second.
-   This function does not enable the interrupt.  */
-void v850e_timer_d_configure (unsigned timer, unsigned rate)
-{
-	unsigned divlog2, count;
-
-	/* Calculate params for timer.  */
-	if (! calc_counter_params (
-		    V850E_TIMER_D_BASE_FREQ, rate,
-		    V850E_TIMER_D_TMCD_CS_MIN, V850E_TIMER_D_TMCD_CS_MAX, 16,
-		    &divlog2, &count))
-		printk (KERN_WARNING
-			"Cannot find interval timer %d setting suitable"
-			" for rate of %dHz.\n"
-			"Using rate of %dHz instead.\n",
-			timer, rate,
-			(V850E_TIMER_D_BASE_FREQ >> divlog2) >> 16);
-
-	/* Do the actual hardware timer initialization:  */
-
-	/* Enable timer.  */
-	V850E_TIMER_D_TMCD(timer) = V850E_TIMER_D_TMCD_CAE;
-	/* Set clock divider.  */
-	V850E_TIMER_D_TMCD(timer)
-		= V850E_TIMER_D_TMCD_CAE
-		| V850E_TIMER_D_TMCD_CS(divlog2);
-	/* Set timer compare register.  */
-	V850E_TIMER_D_CMD(timer) = count;
-	/* Start counting.  */
-	V850E_TIMER_D_TMCD(timer)
-		= V850E_TIMER_D_TMCD_CAE
-		| V850E_TIMER_D_TMCD_CS(divlog2)
-		| V850E_TIMER_D_TMCD_CE;
-}
diff --git a/arch/v850/kernel/v850e_utils.c b/arch/v850/kernel/v850e_utils.c
deleted file mode 100644
index e6807ef8dee6..000000000000
--- a/arch/v850/kernel/v850e_utils.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/v850e_utils.h -- Utility functions associated with
- *	V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/v850e_utils.h>
-
-/* Calculate counter clock-divider and count values to attain the
-   desired frequency RATE from the base frequency BASE_FREQ.  The
-   counter is expected to have a clock-divider, which can divide the
-   system cpu clock by a power of two value from MIN_DIVLOG2 to
-   MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
-   counts up and resets whenever it's equal to the compare register,
-   generating an interrupt or whatever when it does so).  The returned
-   values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
-   -- the counter compare value to use.  Returns true if it was possible
-   to find a reasonable value, otherwise false (and the other return
-   values will be set to be as good as possible).  */
-int calc_counter_params (unsigned long base_freq,
-			 unsigned long rate,
-			 unsigned min_divlog2, unsigned max_divlog2,
-			 unsigned counter_size,
-			 unsigned *divlog2, unsigned *count)
-{
-	unsigned _divlog2;
-	int ok = 0;
-
-	/* Find the lowest clock divider setting that can represent RATE.  */
-	for (_divlog2 = min_divlog2; _divlog2 <= max_divlog2; _divlog2++) {
-		/* Minimum interrupt rate possible using this divider.  */
-		unsigned min_int_rate
-			= (base_freq >> _divlog2) >> counter_size;
-
-		if (min_int_rate <= rate) {
-			/* This setting is the highest resolution
-			   setting that's slow enough enough to attain
-			   RATE interrupts per second, so use it.  */
-			ok = 1;
-			break;
-		}
-	}
-
-	if (_divlog2 > max_divlog2)
-		/* Can't find correct setting.  */
-		_divlog2 = max_divlog2;
-
-	if (divlog2)
-		*divlog2 = _divlog2;
-	if (count)
-		*count = ((base_freq >> _divlog2) + rate/2) / rate;
-
-	return ok;
-}
diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S
deleted file mode 100644
index d08cd1d27f27..000000000000
--- a/arch/v850/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * arch/v850/vmlinux.lds.S -- kernel linker script for v850 platforms
- *
- *  Copyright (C) 2002,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-
-#define VMLINUX_SYMBOL(_sym_) _##_sym_
-#include <asm-generic/vmlinux.lds.h>
-
-/* For most platforms, this will define useful things like RAM addr/size.  */
-#include <asm/machdep.h>
-
-
-/* The following macros contain the usual definitions for various data areas.
-   The prefix `RAMK_' is used to indicate macros suitable for kernels loaded
-   into RAM, and similarly `ROMK_' for ROM-resident kernels.  Note that all
-   symbols are prefixed with an extra `_' for compatibility with the v850
-   toolchain.  */
-
-	
-/* Interrupt vectors.  */
-#define INTV_CONTENTS							      \
-		. = ALIGN (0x10) ;					      \
-		__intv_start = . ;					      \
-			*(.intv.reset)	/* Reset vector */		      \
-		. = __intv_start + 0x10 ;				      \
-			*(.intv.common)	/* Vectors common to all v850e proc */\
-		. = __intv_start + 0x80 ;				      \
-			*(.intv.mach)	/* Machine-specific int. vectors.  */ \
-		__intv_end = . ;
-
-#define RODATA_CONTENTS							      \
-		. = ALIGN (16) ;					      \
-			*(.rodata) *(.rodata.*)				      \
-			*(__vermagic)		/* Kernel version magic */    \
-			*(.rodata1)					      \
-		/* PCI quirks */					      \
-		___start_pci_fixups_early = . ;				      \
-			*(.pci_fixup_early)				      \
-		___end_pci_fixups_early = . ;				      \
-		___start_pci_fixups_header = . ;			      \
-			*(.pci_fixup_header)				      \
-		___end_pci_fixups_header = . ;				      \
-		___start_pci_fixups_final = . ;				      \
-			*(.pci_fixup_final)				      \
-		___end_pci_fixups_final = . ;				      \
-		___start_pci_fixups_enable = . ;			      \
-			*(.pci_fixup_enable)				      \
-		___end_pci_fixups_enable = . ;				      \
-		/* Kernel symbol table: Normal symbols */		      \
-		___start___ksymtab = .;					      \
-			*(__ksymtab)					      \
-		___stop___ksymtab = .;					      \
-		/* Kernel symbol table: GPL-only symbols */		      \
-		___start___ksymtab_gpl = .;				      \
-			*(__ksymtab_gpl)				      \
-		___stop___ksymtab_gpl = .;				      \
-		/* Kernel symbol table: GPL-future symbols */		      \
-		___start___ksymtab_gpl_future = .;			      \
-			*(__ksymtab_gpl_future)				      \
-		___stop___ksymtab_gpl_future = .;			      \
-		/* Kernel symbol table: strings */			      \
-			*(__ksymtab_strings)				      \
-		/* Kernel symbol table: Normal symbols */		      \
-		___start___kcrctab = .;					      \
-			*(__kcrctab)					      \
-		___stop___kcrctab = .;					      \
-		/* Kernel symbol table: GPL-only symbols */		      \
-		___start___kcrctab_gpl = .;				      \
-			*(__kcrctab_gpl)				      \
-		___stop___kcrctab_gpl = .;				      \
-		/* Kernel symbol table: GPL-future symbols */		      \
-		___start___kcrctab_gpl_future = .;			      \
-			*(__kcrctab_gpl_future)				      \
-		___stop___kcrctab_gpl_future = .;			      \
-		/* Built-in module parameters */			      \
-		. = ALIGN (4) ;						      \
-		___start___param = .;					      \
-		*(__param)						      \
-		___stop___param = .;
-
-
-/* Kernel text segment, and some constant data areas.  */
-#define TEXT_CONTENTS							      \
-		_text = .;						      \
-		__stext = . ;						      \
-		TEXT_TEXT						      \
-		SCHED_TEXT						      \
-			*(.exit.text)	/* 2.5 convention */		      \
-			*(.text.exit)	/* 2.4 convention */		      \
-			*(.text.lock)					      \
-			*(.exitcall.exit)				      \
-		__real_etext = . ;	/* There may be data after here.  */  \
-		RODATA_CONTENTS						      \
-		. = ALIGN (4) ;						      \
-		    	*(.call_table_data)				      \
-			*(.call_table_text)				      \
-		. = ALIGN (16) ;	/* Exception table.  */		      \
-		___start___ex_table = . ;				      \
-			*(__ex_table)					      \
-		___stop___ex_table = . ;				      \
-		. = ALIGN (4) ;						      \
-		__etext = . ;
-
-/* Kernel data segment.  */
-#define DATA_CONTENTS							      \
-		__sdata = . ;						      \
-		DATA_DATA						      \
-			EXIT_DATA	/* 2.5 convention */		      \
-			*(.data.exit)	/* 2.4 convention */		      \
-		. = ALIGN (16) ;					      \
-		*(.data.cacheline_aligned)				      \
-		. = ALIGN (0x2000) ;					      \
-        	*(.data.init_task)					      \
-		. = ALIGN (0x2000) ;					      \
-		__edata = . ;
-
-/* Kernel BSS segment.  */
-#define BSS_CONTENTS							      \
-		__sbss = . ;						      \
-			*(.bss)						      \
-			*(COMMON)					      \
-		. = ALIGN (4) ;						      \
-		__init_stack_end = . ;					      \
-		__ebss = . ;
-
-/* `initcall' tables.  */
-#define INITCALL_CONTENTS						      \
-		. = ALIGN (16) ;					      \
-		___setup_start = . ;					      \
-			*(.init.setup)	/* 2.5 convention */		      \
-			*(.setup.init)	/* 2.4 convention */		      \
-		___setup_end = . ;					      \
-		___initcall_start = . ;					      \
-			*(.initcall.init)				      \
-			INITCALLS					      \
-		. = ALIGN (4) ;						      \
-		___initcall_end = . ;					      \
-		___con_initcall_start = .;				      \
-			*(.con_initcall.init)				      \
-		___con_initcall_end = .;
-
-/* Contents of `init' section for a kernel that's loaded into RAM.  */
-#define RAMK_INIT_CONTENTS						      \
-		RAMK_INIT_CONTENTS_NO_END				      \
-		__init_end = . ;
-/* Same as RAMK_INIT_CONTENTS, but doesn't define the `__init_end' symbol.  */
-#define RAMK_INIT_CONTENTS_NO_END					      \
-		. = ALIGN (4096) ;					      \
-		__init_start = . ;					      \
-			__sinittext = .;				      \
-			INIT_TEXT	/* 2.5 convention */		      \
-			__einittext = .;				      \
-			INIT_DATA					      \
-			*(.text.init)	/* 2.4 convention */		      \
-			*(.data.init)					      \
-		INITCALL_CONTENTS					      \
-		INITRAMFS_CONTENTS
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into RAM.  */	
-#define ROMK_INIT_RAM_CONTENTS						      \
-		. = ALIGN (4096) ;					      \
-		__init_start = . ;					      \
-			INIT_DATA	/* 2.5 convention */		      \
-			*(.data.init)	/* 2.4 convention */		      \
-		__init_end = . ;					      \
-		. = ALIGN (4096) ;
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into ROM.  */	
-#define ROMK_INIT_ROM_CONTENTS						      \
-			_sinittext = .;					      \
-			INIT_TEXT	/* 2.5 convention */		      \
-			_einittext = .;					      \
-			*(.text.init)	/* 2.4 convention */		      \
-		INITCALL_CONTENTS					      \
-		INITRAMFS_CONTENTS
-
-/* A root filesystem image, for kernels with an embedded root filesystem.  */
-#define ROOT_FS_CONTENTS						      \
-		__root_fs_image_start = . ;				      \
-		*(.root)						      \
-		__root_fs_image_end = . ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-/* The initramfs archive.  */
-#define INITRAMFS_CONTENTS						      \
-		. = ALIGN (4) ;						      \
-		___initramfs_start = . ;				      \
-			*(.init.ramfs)					      \
-		___initramfs_end = . ;
-#endif
-
-/* Where the initial bootmap (bitmap for the boot-time memory allocator) 
-   should be place.  */
-#define BOOTMAP_CONTENTS						      \
-		. = ALIGN (4096) ;					      \
-		__bootmap = . ;						      \
-		. = . + 4096 ;		/* enough for 128MB.   */
-
-/* The contents of a `typical' kram area for a kernel in RAM.  */
-#define RAMK_KRAM_CONTENTS						      \
-		__kram_start = . ;					      \
-		TEXT_CONTENTS						      \
-		DATA_CONTENTS						      \
-		BSS_CONTENTS						      \
-		RAMK_INIT_CONTENTS					      \
-		__kram_end = . ;					      \
-		BOOTMAP_CONTENTS
-
-
-/* Define output sections normally used for a ROM-resident kernel.  
-   ROM and RAM should be appropriate memory areas to use for kernel
-   ROM and RAM data.  This assumes that ROM starts at 0 (and thus can
-   hold the interrupt vectors).  */
-#define ROMK_SECTIONS(ROM, RAM)						      \
-	.rom : {							      \
-		INTV_CONTENTS						      \
-		TEXT_CONTENTS						      \
-		ROMK_INIT_ROM_CONTENTS					      \
-		ROOT_FS_CONTENTS					      \
-	} > ROM								      \
-									      \
-	__rom_copy_src_start = . ;					      \
-									      \
-	.data : {							      \
-		__kram_start = . ;					      \
-		__rom_copy_dst_start = . ;				      \
-		DATA_CONTENTS						      \
-		ROMK_INIT_RAM_CONTENTS					      \
-		__rom_copy_dst_end = . ;				      \
-	} > RAM  AT> ROM						      \
-									      \
-	.bss ALIGN (4) : {						      \
-		BSS_CONTENTS						      \
-		__kram_end = . ;					      \
-		BOOTMAP_CONTENTS					      \
-	} > RAM
-
-
-/* The 32-bit variable `jiffies' is just the lower 32-bits of `jiffies_64'.  */
-_jiffies = _jiffies_64 ;
-
-
-/* Include an appropriate platform-dependent linker-script (which
-   usually should use the above macros to do most of the work).  */
-
-#ifdef CONFIG_V850E_SIM
-# include "sim.ld"
-#endif
-
-#ifdef CONFIG_V850E2_SIM85E2
-# include "sim85e2.ld"
-#endif
-
-#ifdef CONFIG_V850E2_FPGA85E2C
-# include "fpga85e2c.ld"
-#endif
-
-#ifdef CONFIG_V850E2_ANNA
-# ifdef CONFIG_ROM_KERNEL
-#  include "anna-rom.ld"
-# else
-#  include "anna.ld"
-# endif
-#endif
-
-#ifdef CONFIG_V850E_AS85EP1
-# ifdef CONFIG_ROM_KERNEL
-#  include "as85ep1-rom.ld"
-# else
-#  include "as85ep1.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_MA1
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_ma1_cb-rom.ld"
-# else
-#  include "rte_ma1_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_NB85E
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_nb85e_cb-rom.ld"
-# elif defined(CONFIG_RTE_CB_MULTI)
-#  include "rte_nb85e_cb-multi.ld"
-# else
-#  include "rte_nb85e_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_ME2
-#  include "rte_me2_cb.ld"
-#endif
-
diff --git a/arch/v850/lib/Makefile b/arch/v850/lib/Makefile
deleted file mode 100644
index 1c78b728a117..000000000000
--- a/arch/v850/lib/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# arch/v850/lib/Makefile
-#
-
-lib-y  = ashrdi3.o ashldi3.o lshrdi3.o muldi3.o negdi2.o \
-	 checksum.o memcpy.o memset.o
diff --git a/arch/v850/lib/ashldi3.c b/arch/v850/lib/ashldi3.c
deleted file mode 100644
index 9e792d53f0e4..000000000000
--- a/arch/v850/lib/ashldi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* ashldi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashldi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.low = 0;
-      w.s.high = (USItype)uu.s.low << -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.low >> bm;
-      w.s.low = (USItype)uu.s.low << b;
-      w.s.high = ((USItype)uu.s.high << b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/ashrdi3.c b/arch/v850/lib/ashrdi3.c
deleted file mode 100644
index 78efb65e315a..000000000000
--- a/arch/v850/lib/ashrdi3.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      /* w.s.high = 1..1 or 0..0 */
-      w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-      w.s.low = uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/checksum.c b/arch/v850/lib/checksum.c
deleted file mode 100644
index 042158dfe17a..000000000000
--- a/arch/v850/lib/checksum.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		MIPS specific IP/TCP/UDP checksumming routines
- *
- * Authors:	Ralf Baechle, <ralf@waldorf-gmbh.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.1 2002/09/28 14:58:40 gerg Exp $
- */
-#include <net/checksum.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-static inline unsigned short from32to16 (unsigned long sum)
-{
-	unsigned int result;
-	/*
-			        %0		%1
-	      hsw %1, %0	H     L		L     H
-	      add %1, %0	H     L		H+L+C H+L
-	*/
-	asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
-	return result >> 16;
-}
-
-static inline unsigned int do_csum(const unsigned char * buff, int len)
-{
-	int odd, count;
-	unsigned int result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = be16_to_cpu(*buff);
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-			unsigned int carry = 0;
-			do {
-				unsigned int w = *(unsigned int *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += le16_to_cpu(*buff);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += (__force u32)sum;
-	if ((__force u32)sum > result)
-		result += 1;
-	return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * copy while checksumming, otherwise like csum_partial
- */
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-                               int len, __wsum sum)
-{
-	/*
-	 * It's 2:30 am and I don't feel like doing it real ...
-	 * This is lots slower than the real thing (tm)
-	 */
-	sum = csum_partial(src, len, sum);
-	memcpy(dst, src, len);
-
-	return sum;
-}
-
-/*
- * Copy from userspace and compute checksum.  If we catch an exception
- * then zero the rest of the buffer.
- */
-__wsum csum_partial_copy_from_user (const void *src,
-					  void *dst,
-                                          int len, __wsum sum,
-                                          int *err_ptr)
-{
-	int missing;
-
-	missing = copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*err_ptr = -EFAULT;
-	}
-		
-	return csum_partial(dst, len, sum);
-}
diff --git a/arch/v850/lib/lshrdi3.c b/arch/v850/lib/lshrdi3.c
deleted file mode 100644
index 93b1cb6fdee8..000000000000
--- a/arch/v850/lib/lshrdi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__lshrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.high = 0;
-      w.s.low = (USItype)uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = (USItype)uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/memcpy.c b/arch/v850/lib/memcpy.c
deleted file mode 100644
index 492847b3e612..000000000000
--- a/arch/v850/lib/memcpy.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/v850/lib/memcpy.c -- Memory copying
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <asm/string.h>
-
-#define CHUNK_SIZE		32 /* bytes */
-#define CHUNK_ALIGNED(addr)	(((unsigned long)addr & 0x3) == 0)
-
-/* Note that this macro uses 8 call-clobbered registers (not including
-   R1), which are few enough so that the following functions don't need
-   to spill anything to memory.  It also uses R1, which is nominally
-   reserved for the assembler, but here it should be OK.  */
-#define COPY_CHUNK(src, dst)			\
-   asm ("mov %0, ep;"				\
-	"sld.w 0[ep], r1; sld.w 4[ep], r12;"	\
-	"sld.w 8[ep], r13; sld.w 12[ep], r14;"	\
-	"sld.w 16[ep], r15; sld.w 20[ep], r17;"	\
-	"sld.w 24[ep], r18; sld.w 28[ep], r19;"	\
-	"mov %1, ep;"				\
-	"sst.w r1, 0[ep]; sst.w r12, 4[ep];"	\
-	"sst.w r13, 8[ep]; sst.w r14, 12[ep];"	\
-	"sst.w r15, 16[ep]; sst.w r17, 20[ep];"	\
-	"sst.w r18, 24[ep]; sst.w r19, 28[ep]"	\
-	:: "r" (src), "r" (dst)			\
-	: "r1", "r12", "r13", "r14", "r15",	\
-	  "r17", "r18", "r19", "ep", "memory");
-
-void *memcpy (void *dst, const void *src, __kernel_size_t size)
-{
-	char *_dst = dst;
-	const char *_src = src;
-
-	if (size >= CHUNK_SIZE && CHUNK_ALIGNED(_src) && CHUNK_ALIGNED(_dst)) {
-		/* Copy large blocks efficiently.  */
-		unsigned count;
-		for (count = size / CHUNK_SIZE; count; count--) {
-			COPY_CHUNK (_src, _dst);
-			_src += CHUNK_SIZE;
-			_dst += CHUNK_SIZE;
-		}
-		size %= CHUNK_SIZE;
-	}
-
-	if (size > 0)
-		do
-			*_dst++ = *_src++;
-		while (--size);
-
-	return dst;
-}
-
-void *memmove (void *dst, const void *src, __kernel_size_t size)
-{
-	if ((unsigned long)dst < (unsigned long)src
-	    || (unsigned long)src + size < (unsigned long)dst)
-		return memcpy (dst, src, size);
-	else {
-		char *_dst = dst + size;
-		const char *_src = src + size;
-
-		if (size >= CHUNK_SIZE
-		    && CHUNK_ALIGNED (_src) && CHUNK_ALIGNED (_dst))
-		{
-			/* Copy large blocks efficiently.  */
-			unsigned count;
-			for (count = size / CHUNK_SIZE; count; count--) {
-				_src -= CHUNK_SIZE;
-				_dst -= CHUNK_SIZE;
-				COPY_CHUNK (_src, _dst);
-			}
-			size %= CHUNK_SIZE;
-		}
-
-		if (size > 0)
-			do
-				*--_dst = *--_src;
-			while (--size);
-
-		return _dst;
-	}
-}
diff --git a/arch/v850/lib/memset.c b/arch/v850/lib/memset.c
deleted file mode 100644
index d1b2ad821b15..000000000000
--- a/arch/v850/lib/memset.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/v850/lib/memset.c -- Memory initialization
- *
- *  Copyright (C) 2001,02,04  NEC Corporation
- *  Copyright (C) 2001,02,04  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-
-void *memset (void *dst, int val, __kernel_size_t count)
-{
-	if (count) {
-		register unsigned loop;
-		register void *ptr asm ("ep") = dst;
-
-		/* replicate VAL into a long.  */
-		val &= 0xff;
-		val |= val << 8;
-		val |= val << 16;
-
-		/* copy initial unaligned bytes.  */
-		if ((long)ptr & 1) {
-			*(char *)ptr = val;
-			ptr = (void *)((char *)ptr + 1);
-			count--;
-		}
-		if (count > 2 && ((long)ptr & 2)) {
-			*(short *)ptr = val;
-			ptr = (void *)((short *)ptr + 1);
-			count -= 2;
-		}
-
-		/* 32-byte copying loop.  */
-		for (loop = count / 32; loop; loop--) {
-			asm ("sst.w %0, 0[ep]; sst.w %0, 4[ep];"
-			     "sst.w %0, 8[ep]; sst.w %0, 12[ep];"
-			     "sst.w %0, 16[ep]; sst.w %0, 20[ep];"
-			     "sst.w %0, 24[ep]; sst.w %0, 28[ep]"
-			     :: "r" (val) : "memory");
-			ptr += 32;
-		}
-		count %= 32;
-
-		/* long copying loop.  */
-		for (loop = count / 4; loop; loop--) {
-			*(long *)ptr = val;
-			ptr = (void *)((long *)ptr + 1);
-		}
-		count %= 4;
-
-		/* finish up with any trailing bytes.  */
-		if (count & 2) {
-			*(short *)ptr = val;
-			ptr = (void *)((short *)ptr + 1);
-		}
-		if (count & 1) {
-			*(char *)ptr = val;
-		}
-	}
-
-	return dst;
-}
diff --git a/arch/v850/lib/muldi3.c b/arch/v850/lib/muldi3.c
deleted file mode 100644
index 277ca25c82c8..000000000000
--- a/arch/v850/lib/muldi3.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and 
-			   gcc-2.7.2.3/longlong.h which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 2001 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define umul_ppmm(w1, w0, u, v) \
-  __asm__ ("mulu %3, %0, %1"						\
-           : "=r" ((USItype)(w0)),					\
-             "=r" ((USItype)(w1))					\
-           : "%0" ((USItype)(u)),					\
-             "r" ((USItype)(v)))
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;							\
-    umul_ppmm (__w.s.high, __w.s.low, u, v);				\
-    __w.ll; })
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__muldi3 (DItype u, DItype v)
-{
-  DIunion w;
-  DIunion uu, vv;
-
-  uu.ll = u,
-  vv.ll = v;
-
-  w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-  w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-	       + (USItype) uu.s.high * (USItype) vv.s.low);
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/negdi2.c b/arch/v850/lib/negdi2.c
deleted file mode 100644
index 571e04fc619a..000000000000
--- a/arch/v850/lib/negdi2.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/v850/lib/negdi2.c -- 64-bit negation
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-typedef		 int DItype	__attribute__ ((mode (DI)));
-
-DItype __negdi2 (DItype x)
-{
-	__asm__ __volatile__
-		("not	r6, r10;"
-		 "add	1, r10;"
-		 "setf	c, r6;"
-		 "not	r7, r11;"
-		 "add	r6, r11"
-		 ::: "r6", "r7", "r10", "r11");
-}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index bf07b6f50fa1..6bdde845818e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -21,10 +21,16 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_IOREMAP_PROT
+	select HAVE_GET_USER_PAGES_FAST
 	select HAVE_KPROBES
+	select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X
 	select HAVE_KRETPROBES
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE
 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
 	select HAVE_ARCH_KGDB if !X86_VOYAGER
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 
 config ARCH_DEFCONFIG
 	string
@@ -121,7 +127,7 @@ config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y
 
 config HAVE_SETUP_PER_CPU_AREA
-	def_bool X86_64 || (X86_SMP && !X86_VOYAGER)
+	def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER)
 
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
@@ -168,6 +174,7 @@ config GENERIC_PENDING_IRQ
 config X86_SMP
 	bool
 	depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
+	select USE_GENERIC_SMP_HELPERS
 	default y
 
 config X86_32_SMP
@@ -181,12 +188,12 @@ config X86_64_SMP
 config X86_HT
 	bool
 	depends on SMP
-	depends on (X86_32 && !(X86_VISWS || X86_VOYAGER)) || X86_64
+	depends on (X86_32 && !X86_VOYAGER) || X86_64
 	default y
 
 config X86_BIOS_REBOOT
 	bool
-	depends on !X86_VISWS && !X86_VOYAGER
+	depends on !X86_VOYAGER
 	default y
 
 config X86_TRAMPOLINE
@@ -230,6 +237,26 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config X86_FIND_SMP_CONFIG
+	def_bool y
+	depends on X86_MPPARSE || X86_VOYAGER
+
+if ACPI
+config X86_MPPARSE
+	def_bool y
+	bool "Enable MPS table"
+	depends on X86_LOCAL_APIC
+	help
+	  For old smp systems that do not have proper acpi support. Newer systems
+	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
+endif
+
+if !ACPI
+config X86_MPPARSE
+	def_bool y
+	depends on X86_LOCAL_APIC
+endif
+
 choice
 	prompt "Subarchitecture Type"
 	default X86_PC
@@ -251,7 +278,7 @@ config X86_ELAN
 
 config X86_VOYAGER
 	bool "Voyager (NCR)"
-	depends on X86_32 && (SMP || BROKEN)
+	depends on X86_32 && (SMP || BROKEN) && !PCI
 	help
 	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
 	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
@@ -261,16 +288,27 @@ config X86_VOYAGER
 	  If you do not specifically know you have a Voyager based machine,
 	  say N here, otherwise the kernel you build will not be bootable.
 
+config X86_GENERICARCH
+       bool "Generic architecture"
+	depends on X86_32
+       help
+          This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+	  subarchitectures.  It is intended for a generic binary kernel.
+	  if you select them all, kernel will probe it one by one. and will
+	  fallback to default.
+
+if X86_GENERICARCH
+
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
-	depends on SMP && X86_32
+	depends on SMP && X86_32 && PCI && X86_MPPARSE
 	select NUMA
 	help
-	  This option is used for getting Linux to run on a (IBM/Sequent) NUMA
-	  multiquad box. This changes the way that processors are bootstrapped,
-	  and uses Clustered Logical APIC addressing mode instead of Flat Logical.
-	  You will need a new lynxer.elf file to flash your firmware with - send
-	  email to <Martin.Bligh@us.ibm.com>.
+	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
+	  NUMA multiquad box. This changes the way that processors are
+	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
+	  of Flat Logical.  You will need a new lynxer.elf file to flash your
+	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
 
 config X86_SUMMIT
 	bool "Summit/EXA (IBM x440)"
@@ -279,46 +317,21 @@ config X86_SUMMIT
 	  This option is needed for IBM systems that use the Summit/EXA chipset.
 	  In particular, it is needed for the x440.
 
-	  If you don't have one of these computers, you should say N here.
-	  If you want to build a NUMA kernel, you must select ACPI.
+config X86_ES7000
+	bool "Support for Unisys ES7000 IA32 series"
+	depends on X86_32 && SMP
+	help
+	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
+	  supposed to run on an IA32-based Unisys ES7000 system.
 
 config X86_BIGSMP
-	bool "Support for other sub-arch SMP systems with more than 8 CPUs"
+	bool "Support for big SMP systems with more than 8 CPUs"
 	depends on X86_32 && SMP
 	help
 	  This option is needed for the systems that have more than 8 CPUs
 	  and if the system is not of any sub-arch type above.
 
-	  If you don't have such a system, you should say N here.
-
-config X86_VISWS
-	bool "SGI 320/540 (Visual Workstation)"
-	depends on X86_32
-	help
-	  The SGI Visual Workstation series is an IA32-based workstation
-	  based on SGI systems chips with some legacy PC hardware attached.
-
-	  Say Y here to create a kernel to run on the SGI 320 or 540.
-
-	  A kernel compiled for the Visual Workstation will not run on PCs
-	  and vice versa. See <file:Documentation/sgi-visws.txt> for details.
-
-config X86_GENERICARCH
-       bool "Generic architecture (Summit, bigsmp, ES7000, default)"
-	depends on X86_32
-       help
-          This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
-	  It is intended for a generic binary kernel.
-	  If you want a NUMA kernel, select ACPI.   We need SRAT for NUMA.
-
-config X86_ES7000
-	bool "Support for Unisys ES7000 IA32 series"
-	depends on X86_32 && SMP
-	help
-	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
-	  supposed to run on an IA32-based Unisys ES7000 system.
-	  Only choose this option if you have such a system, otherwise you
-	  should say N here.
+endif
 
 config X86_RDC321X
 	bool "RDC R-321x SoC"
@@ -337,7 +350,7 @@ config X86_RDC321X
 config X86_VSMP
 	bool "Support for ScaleMP vSMP"
 	select PARAVIRT
-	depends on X86_64
+	depends on X86_64 && PCI
 	help
 	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
 	  supposed to run on these EM64T-based machines.  Only choose this option
@@ -345,6 +358,18 @@ config X86_VSMP
 
 endchoice
 
+config X86_VISWS
+	bool "SGI 320/540 (Visual Workstation)"
+	depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT
+	help
+	  The SGI Visual Workstation series is an IA32-based workstation
+	  based on SGI systems chips with some legacy PC hardware attached.
+
+	  Say Y here to create a kernel to run on the SGI 320 or 540.
+
+	  A kernel compiled for the Visual Workstation will run on general
+	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
+
 config SCHED_NO_NO_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
@@ -373,7 +398,7 @@ config VMI
 	bool "VMI Guest support"
 	select PARAVIRT
 	depends on X86_32
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	help
 	  VMI provides a paravirtualized interface to the VMware ESX server
 	  (it could be used by other hypervisors in theory too, but is not
@@ -384,7 +409,7 @@ config KVM_CLOCK
 	bool "KVM paravirtualized clock"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	help
 	  Turning on this option will allow you to run a paravirtualized clock
 	  when running over the KVM hypervisor. Instead of relying on a PIT
@@ -395,7 +420,7 @@ config KVM_CLOCK
 config KVM_GUEST
 	bool "KVM Guest support"
 	select PARAVIRT
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	help
 	 This option enables various optimizations for running under the KVM
 	 hypervisor.
@@ -404,7 +429,7 @@ source "arch/x86/lguest/Kconfig"
 
 config PARAVIRT
 	bool "Enable paravirtualization code"
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	help
 	  This changes the kernel so it can modify itself when it is run
 	  under a hypervisor, potentially improving performance significantly
@@ -417,51 +442,31 @@ config PARAVIRT_CLOCK
 
 endif
 
-config MEMTEST_BOOTPARAM
-	bool "Memtest boot parameter"
-	depends on X86_64
-	default y
-	help
-	  This option adds a kernel parameter 'memtest', which allows memtest
-	  to be disabled at boot.  If this option is selected, memtest
-	  functionality can be disabled with memtest=0 on the kernel
-	  command line.  The purpose of this option is to allow a single
-	  kernel image to be distributed with memtest built in, but not
-	  necessarily enabled.
-
-	  If you are unsure how to answer this question, answer Y.
+config PARAVIRT_DEBUG
+       bool "paravirt-ops debugging"
+       depends on PARAVIRT && DEBUG_KERNEL
+       help
+         Enable to debug paravirt_ops internals.  Specifically, BUG if
+	 a paravirt_op is missing when it is called.
 
-config MEMTEST_BOOTPARAM_VALUE
-	int "Memtest boot parameter default value (0-4)"
-	depends on MEMTEST_BOOTPARAM
-	range 0 4
-	default 0
+config MEMTEST
+	bool "Memtest"
 	help
-	  This option sets the default value for the kernel parameter
-	  'memtest', which allows memtest to be disabled at boot.  If this
-	  option is set to 0 (zero), the memtest kernel parameter will
-	  default to 0, disabling memtest at bootup.  If this option is
-	  set to 4, the memtest kernel parameter will default to 4,
-	  enabling memtest at bootup, and use that as pattern number.
-
-	  If you are unsure how to answer this question, answer 0.
-
-config ACPI_SRAT
-	def_bool y
-	depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
-	select ACPI_NUMA
-
-config HAVE_ARCH_PARSE_SRAT
-	def_bool y
-	depends on ACPI_SRAT
+	  This option adds a kernel parameter 'memtest', which allows memtest
+	  to be set.
+		memtest=0, mean disabled; -- default
+		memtest=1, mean do 1 test pattern;
+		...
+		memtest=4, mean do 4 test patterns.
+	  If you are unsure how to answer this question, answer N.
 
 config X86_SUMMIT_NUMA
 	def_bool y
-	depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+	depends on X86_32 && NUMA && X86_GENERICARCH
 
 config X86_CYCLONE_TIMER
 	def_bool y
-	depends on X86_32 && X86_SUMMIT || X86_GENERICARCH
+	depends on X86_GENERICARCH
 
 config ES7000_CLUSTERED_APIC
 	def_bool y
@@ -549,6 +554,21 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
 	  Calgary anyway, pass 'iommu=calgary' on the kernel command line.
 	  If unsure, say Y.
 
+config AMD_IOMMU
+	bool "AMD IOMMU support"
+	select SWIOTLB
+	depends on X86_64 && PCI && ACPI
+	help
+	  With this option you can enable support for AMD IOMMU hardware in
+	  your system. An IOMMU is a hardware component which provides
+	  remapping of DMA memory accesses from devices. With an AMD IOMMU you
+	  can isolate the the DMA memory of different devices and protect the
+	  system from misbehaving device drivers or hardware.
+
+	  You can find out if your system has an AMD IOMMU if you look into
+	  your BIOS for an option to enable it or if you have an IVRS ACPI
+	  table.
+
 # need this always selected by IOMMU for the VIA workaround
 config SWIOTLB
 	bool
@@ -560,21 +580,36 @@ config SWIOTLB
 	  3 GB of memory. If unsure, say Y.
 
 config IOMMU_HELPER
-	def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB)
+	def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+config MAXSMP
+	bool "Configure Maximum number of SMP Processors and NUMA Nodes"
+	depends on X86_64 && SMP
+	default n
+	help
+	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
+	  If unsure, say N.
 
+if MAXSMP
 config NR_CPUS
-	int "Maximum number of CPUs (2-255)"
-	range 2 255
+	int
+	default "4096"
+endif
+
+if !MAXSMP
+config NR_CPUS
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
 	depends on SMP
 	default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
 	default "8"
 	help
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support.  The maximum supported value is 255 and the
+	  kernel will support.  The maximum supported value is 4096 and the
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
+endif
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
@@ -598,7 +633,7 @@ source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
-	depends on X86_32 && !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
+	depends on X86_32 && !SMP && !(X86_VOYAGER || X86_GENERICARCH)
 	help
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -623,11 +658,11 @@ config X86_UP_IOAPIC
 
 config X86_LOCAL_APIC
 	def_bool y
-	depends on X86_64 || (X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH))
+	depends on X86_64 || (X86_32 && (X86_UP_APIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
 
 config X86_IO_APIC
 	def_bool y
-	depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH))
+	depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
 
 config X86_VISWS_APIC
 	def_bool y
@@ -681,7 +716,7 @@ config X86_MCE_NONFATAL
 
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
-	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
+	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
 	help
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.
@@ -911,9 +946,9 @@ config X86_PAE
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
 	depends on SMP
-	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
+	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
 	default n if X86_PC
-	default y if (X86_NUMAQ || X86_SUMMIT)
+	default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
 	help
 	  Enable NUMA (Non Uniform Memory Access) support.
 	  The kernel will try to allocate memory used by a CPU on the
@@ -965,13 +1000,25 @@ config NUMA_EMU
 	  into virtual nodes when booted with "numa=fake=N", where N is the
 	  number of nodes. This is only useful for debugging.
 
+if MAXSMP
+
 config NODES_SHIFT
-	int "Max num nodes shift(1-9)"
-	range 1 9  if X86_64
+	int
+	default "9"
+endif
+
+if !MAXSMP
+config NODES_SHIFT
+	int "Maximum NUMA Nodes (as a power of 2)"
+	range 1 9   if X86_64
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
 	depends on NEED_MULTIPLE_NODES
+	help
+	  Specify the maximum number of NUMA Nodes available on the target
+	  system.  Increases memory reserved to accomodate various tables.
+endif
 
 config HAVE_ARCH_BOOTMEM_NODE
 	def_bool y
@@ -1090,6 +1137,37 @@ config MTRR
 
 	  See <file:Documentation/mtrr.txt> for more information.
 
+config MTRR_SANITIZER
+	bool
+	prompt "MTRR cleanup support"
+	depends on MTRR
+	help
+	  Convert MTRR layout from continuous to discrete, so X drivers can
+	  add writeback entries.
+
+	  Can be disabled with disable_mtrr_cleanup on the kernel command line.
+	  The largest mtrr entry size for a continous block can be set with
+	  mtrr_chunk_size.
+
+	  If unsure, say N.
+
+config MTRR_SANITIZER_ENABLE_DEFAULT
+	int "MTRR cleanup enable value (0-1)"
+	range 0 1
+	default "0"
+	depends on MTRR_SANITIZER
+	help
+	  Enable mtrr cleanup default value
+
+config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
+	int "MTRR cleanup spare reg num (0-7)"
+	range 0 7
+	default "1"
+	depends on MTRR_SANITIZER
+	help
+	  mtrr cleanup spare entries default, it can be changed via
+	  mtrr_spare_reg_nr=N on the kernel command line.
+
 config X86_PAT
 	bool
 	prompt "x86 PAT support"
@@ -1190,7 +1268,6 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "kernel crash dumps (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
 	depends on X86_64 || (X86_32 && HIGHMEM)
 	help
 	  Generate crash dump after being started by kexec.
@@ -1203,6 +1280,14 @@ config CRASH_DUMP
 	  (CONFIG_RELOCATABLE=y).
 	  For more details see Documentation/kdump/kdump.txt
 
+config KEXEC_JUMP
+	bool "kexec jump (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on KEXEC && HIBERNATION && X86_32
+	help
+	  Jump between original kernel and kexeced kernel and invoke
+	  code in physical address mode via KEXEC
+
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
 	default "0x1000000" if X86_NUMAQ
@@ -1339,7 +1424,7 @@ config X86_APM_BOOT
 
 menuconfig APM
 	tristate "APM (Advanced Power Management) BIOS support"
-	depends on X86_32 && PM_SLEEP && !X86_VISWS
+	depends on X86_32 && PM_SLEEP
 	---help---
 	  APM is a BIOS specification for saving power using several different
 	  techniques. This is mostly useful for battery powered laptops with
@@ -1475,8 +1560,7 @@ endmenu
 menu "Bus options (PCI etc.)"
 
 config PCI
-	bool "PCI support" if !X86_VISWS && !X86_VSMP
-	depends on !X86_VOYAGER
+	bool "PCI support"
 	default y
 	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
 	help
@@ -1487,7 +1571,7 @@ config PCI
 
 choice
 	prompt "PCI access mode"
-	depends on X86_32 && PCI && !X86_VISWS
+	depends on X86_32 && PCI
 	default PCI_GOANY
 	---help---
 	  On PCI systems, the BIOS can be used to detect the PCI devices and
@@ -1524,12 +1608,12 @@ endchoice
 
 config PCI_BIOS
 	def_bool y
-	depends on X86_32 && !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
+	depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY)
 
 # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
 config PCI_DIRECT
 	def_bool y
-	depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
+	depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC))
 
 config PCI_MMCONFIG
 	def_bool y
@@ -1589,7 +1673,7 @@ if X86_32
 
 config ISA
 	bool "ISA support"
-	depends on !(X86_VOYAGER || X86_VISWS)
+	depends on !X86_VOYAGER
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -1616,7 +1700,7 @@ config EISA
 source "drivers/eisa/Kconfig"
 
 config MCA
-	bool "MCA support" if !(X86_VISWS || X86_VOYAGER)
+	bool "MCA support" if !X86_VOYAGER
 	default y if X86_VOYAGER
 	help
 	  MicroChannel Architecture is found in some IBM PS/2 machines and
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 2ad6301849a1..2c518fbc52ec 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -344,7 +344,7 @@ config X86_F00F_BUG
 
 config X86_WP_WORKS_OK
 	def_bool y
-	depends on X86_32 && !M386
+	depends on !M386
 
 config X86_INVLPG
 	def_bool y
@@ -362,10 +362,6 @@ config X86_ALIGNMENT_16
 	def_bool y
 	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
 
-config X86_GOOD_APIC
-	def_bool y
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
-
 config X86_INTEL_USERCOPY
 	def_bool y
 	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
@@ -399,6 +395,10 @@ config X86_TSC
 	def_bool y
 	depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
 
+config X86_CMPXCHG64
+	def_bool y
+	depends on X86_PAE || X86_64
+
 # this should be set for all -march=.. options where the compiler
 # generates cmov.
 config X86_CMOV
@@ -414,4 +414,4 @@ config X86_MINIMUM_CPU_FAMILY
 
 config X86_DEBUGCTLMSR
 	def_bool y
-	depends on !(M586MMX || M586TSC || M586 || M486 || M386)
+	depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 18363374d51a..092f019e033a 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -5,13 +5,15 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
-config NONPROMISC_DEVMEM
+config STRICT_DEVMEM
 	bool "Filter access to /dev/mem"
 	help
-	  If this option is left off, you allow userspace access to all
+	  If this option is disabled, you allow userspace (root) access to all
 	  of memory, including kernel and userspace memory. Accidental
 	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
+	  be used by people debugging the kernel. Note that with PAT support
+	  enabled, even in this case there are restrictions on /dev/mem
+	  use due to the cache aliasing requirements.
 
 	  If this option is switched on, the /dev/mem file only allows
 	  userspace access to PCI space and the BIOS code and data regions.
@@ -20,6 +22,14 @@ config NONPROMISC_DEVMEM
 
 	  If in doubt, say Y.
 
+config X86_VERBOSE_BOOTUP
+	bool "Enable verbose x86 bootup info messages"
+	default y
+	help
+	  Enables the informational output from the decompression stage
+	  (e.g. bzImage) of the boot. If you disable this you will still
+	  see errors. Disable this if you want silent bootup.
+
 config EARLY_PRINTK
 	bool "Early printk" if EMBEDDED
 	default y
@@ -60,7 +70,7 @@ config DEBUG_PAGEALLOC
 config DEBUG_PER_CPU_MAPS
 	bool "Debug access to per_cpu maps"
 	depends on DEBUG_KERNEL
-	depends on X86_64_SMP
+	depends on X86_SMP
 	default n
 	help
 	  Say Y to verify that the per_cpu map being accessed has
@@ -129,15 +139,6 @@ config 4KSTACKS
 	  on the VM subsystem for higher order allocations. This option
 	  will also use IRQ stacks to compensate for the reduced stackspace.
 
-config X86_FIND_SMP_CONFIG
-	def_bool y
-	depends on X86_LOCAL_APIC || X86_VOYAGER
-	depends on X86_32
-
-config X86_MPPARSE
-	def_bool y
-	depends on (X86_32 && (X86_LOCAL_APIC && !X86_VISWS)) || X86_64
-
 config DOUBLEFAULT
 	default y
 	bool "Enable doublefault exception handler" if EMBEDDED
@@ -172,6 +173,33 @@ config IOMMU_LEAK
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
+config MMIOTRACE_HOOKS
+	bool
+
+config MMIOTRACE
+	bool "Memory mapped IO tracing"
+	depends on DEBUG_KERNEL && PCI
+	select TRACING
+	select MMIOTRACE_HOOKS
+	help
+	  Mmiotrace traces Memory Mapped I/O access and is meant for
+	  debugging and reverse engineering. It is called from the ioremap
+	  implementation and works via page faults. Tracing is disabled by
+	  default and can be enabled at run-time.
+
+	  See Documentation/tracers/mmiotrace.txt.
+	  If you are not helping to develop drivers, say N.
+
+config MMIOTRACE_TEST
+	tristate "Test module for mmiotrace"
+	depends on MMIOTRACE && m
+	help
+	  This is a dumb module for testing mmiotrace. It is very dangerous
+	  as it will write garbage to IO memory starting at a given address.
+	  However, it should be safe to use on e.g. unused portion of VRAM.
+
+	  Say N, unless you absolutely know what you are doing.
+
 #
 # IO delay types:
 #
@@ -261,7 +289,6 @@ config CPA_DEBUG
 
 config OPTIMIZE_INLINING
 	bool "Allow gcc to uninline functions marked 'inline'"
-	depends on BROKEN
 	help
 	  This option determines if the kernel forces gcc to inline the functions
 	  developers have marked 'inline'. Doing so takes away freedom from gcc to
@@ -272,5 +299,7 @@ config OPTIMIZE_INLINING
 	  become the default in the future, until then this option is there to
 	  test gcc for this.
 
+	  If unsure, say N.
+
 endmenu
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 3cff3c894cf3..919ce21ea654 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -113,33 +113,11 @@ mcore-y  := arch/x86/mach-default/
 mflags-$(CONFIG_X86_VOYAGER)	:= -Iinclude/asm-x86/mach-voyager
 mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
 
-# VISWS subarch support
-mflags-$(CONFIG_X86_VISWS)	:= -Iinclude/asm-x86/mach-visws
-mcore-$(CONFIG_X86_VISWS)	:= arch/x86/mach-visws/
-
-# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ)	:= -Iinclude/asm-x86/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ)	:= arch/x86/mach-default/
-
-# BIGSMP subarch support
-mflags-$(CONFIG_X86_BIGSMP)	:= -Iinclude/asm-x86/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP)	:= arch/x86/mach-default/
-
-#Summit subarch support
-mflags-$(CONFIG_X86_SUMMIT)	:= -Iinclude/asm-x86/mach-summit
-mcore-$(CONFIG_X86_SUMMIT)	:= arch/x86/mach-default/
-
 # generic subarchitecture
 mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
 mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
 
-
-# ES7000 subarch support
-mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-x86/mach-es7000
-fcore-$(CONFIG_X86_ES7000)	:= arch/x86/mach-es7000/
-mcore-$(CONFIG_X86_ES7000)	:= arch/x86/mach-default/
-
 # RDC R-321x subarch support
 mflags-$(CONFIG_X86_RDC321X)	:= -Iinclude/asm-x86/mach-rdc321x
 mcore-$(CONFIG_X86_RDC321X)	:= arch/x86/mach-default/
@@ -160,6 +138,7 @@ KBUILD_AFLAGS += $(mflags-y)
 
 head-y := arch/x86/kernel/head_$(BITS).o
 head-y += arch/x86/kernel/head$(BITS).o
+head-y += arch/x86/kernel/head.o
 head-y += arch/x86/kernel/init_task.o
 
 libs-y  += arch/x86/lib/
@@ -210,12 +189,12 @@ all: bzImage
 
 # KBUILD_IMAGE specify target image being built
                     KBUILD_IMAGE := $(boot)/bzImage
-zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
+zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage
 
 zImage bzImage: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
 	$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
-	$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage
+	$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
 
 compressed: zImage
 
diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c
index e01aafd03bde..4063d630deff 100644
--- a/arch/x86/boot/a20.c
+++ b/arch/x86/boot/a20.c
@@ -1,7 +1,7 @@
 /* -*- linux-c -*- ------------------------------------------------------- *
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2007-2008 rPath, Inc. - All Rights Reserved
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -95,6 +95,9 @@ static void enable_a20_kbc(void)
 
 	outb(0xdf, 0x60);	/* A20 on */
 	empty_8042();
+
+	outb(0xff, 0x64);	/* Null command, but UHCI wants it */
+	empty_8042();
 }
 
 static void enable_a20_fast(void)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index d8819efac81d..1d5dff4123e1 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -30,6 +30,7 @@
 #include <asm/page.h>
 #include <asm/boot.h>
 #include <asm/msr.h>
+#include <asm/processor-flags.h>
 #include <asm/asm-offsets.h>
 
 .section ".text.head"
@@ -109,7 +110,7 @@ startup_32:
 
 	/* Enable PAE mode */
 	xorl	%eax, %eax
-	orl	$(1 << 5), %eax
+	orl	$(X86_CR4_PAE), %eax
 	movl	%eax, %cr4
 
  /*
@@ -170,7 +171,7 @@ startup_32:
 	pushl	%eax
 
 	/* Enter paged protected Mode, activating Long Mode */
-	movl	$0x80000001, %eax /* Enable Paging and Protected mode */
+	movl	$(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */
 	movl	%eax, %cr0
 
 	/* Jump from 32bit compatibility mode into 64bit mode. */
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 90456cee47c3..9fea73706479 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -30,6 +30,7 @@
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/boot.h>
+#include <asm/bootparam.h>
 
 /* WARNING!!
  * This code is compiled with -fPIC and it is relocated dynamically
@@ -181,32 +182,23 @@ static unsigned		outcnt;
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 /*
  * This is set up by the setup-routine at boot-time
  */
-static unsigned char *real_mode; /* Pointer to real-mode data */
-
-#define RM_EXT_MEM_K   (*(unsigned short *)(real_mode + 0x2))
-#ifndef STANDARD_MEMORY_BIOS_CALL
-#define RM_ALT_MEM_K   (*(unsigned long *)(real_mode + 0x1e0))
-#endif
-#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0))
+static struct boot_params *real_mode;		/* Pointer to real-mode data */
+static int quiet;
 
 extern unsigned char input_data[];
 extern int input_len;
 
 static long bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
-
 static void *memset(void *s, int c, unsigned n);
 static void *memcpy(void *dest, const void *src, unsigned n);
 
-static void putstr(const char *);
+static void __putstr(int, const char *);
+#define putstr(__x)  __putstr(0, __x)
 
 #ifdef CONFIG_X86_64
 #define memptr long
@@ -221,46 +213,8 @@ static char *vidmem;
 static int vidport;
 static int lines, cols;
 
-#ifdef CONFIG_X86_NUMAQ
-void *xquad_portio;
-#endif
-
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error");
-	if (free_mem_ptr <= 0)
-		error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (memptr) *ptr;
-}
-
 static void scroll(void)
 {
 	int i;
@@ -270,18 +224,24 @@ static void scroll(void)
 		vidmem[i] = ' ';
 }
 
-static void putstr(const char *s)
+static void __putstr(int error, const char *s)
 {
 	int x, y, pos;
 	char c;
 
+#ifndef CONFIG_X86_VERBOSE_BOOTUP
+	if (!error)
+		return;
+#endif
+
 #ifdef CONFIG_X86_32
-	if (RM_SCREEN_INFO.orig_video_mode == 0 && lines == 0 && cols == 0)
+	if (real_mode->screen_info.orig_video_mode == 0 &&
+	    lines == 0 && cols == 0)
 		return;
 #endif
 
-	x = RM_SCREEN_INFO.orig_x;
-	y = RM_SCREEN_INFO.orig_y;
+	x = real_mode->screen_info.orig_x;
+	y = real_mode->screen_info.orig_y;
 
 	while ((c = *s++) != '\0') {
 		if (c == '\n') {
@@ -302,8 +262,8 @@ static void putstr(const char *s)
 		}
 	}
 
-	RM_SCREEN_INFO.orig_x = x;
-	RM_SCREEN_INFO.orig_y = y;
+	real_mode->screen_info.orig_x = x;
+	real_mode->screen_info.orig_y = y;
 
 	pos = (x + cols * y) * 2;	/* Update cursor position */
 	outb(14, vidport);
@@ -366,9 +326,9 @@ static void flush_window(void)
 
 static void error(char *x)
 {
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System halted");
+	__putstr(1, "\n\n");
+	__putstr(1, x);
+	__putstr(1, "\n\n -- System halted");
 
 	while (1)
 		asm("hlt");
@@ -395,7 +355,8 @@ static void parse_elf(void *output)
 		return;
 	}
 
-	putstr("Parsing ELF... ");
+	if (!quiet)
+		putstr("Parsing ELF... ");
 
 	phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
 	if (!phdrs)
@@ -430,7 +391,10 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 {
 	real_mode = rmode;
 
-	if (RM_SCREEN_INFO.orig_video_mode == 7) {
+	if (real_mode->hdr.loadflags & QUIET_FLAG)
+		quiet = 1;
+
+	if (real_mode->screen_info.orig_video_mode == 7) {
 		vidmem = (char *) 0xb0000;
 		vidport = 0x3b4;
 	} else {
@@ -438,8 +402,8 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 		vidport = 0x3d4;
 	}
 
-	lines = RM_SCREEN_INFO.orig_video_lines;
-	cols = RM_SCREEN_INFO.orig_video_cols;
+	lines = real_mode->screen_info.orig_video_lines;
+	cols = real_mode->screen_info.orig_video_cols;
 
 	window = output;		/* Output buffer (Normally at 1M) */
 	free_mem_ptr     = heap;	/* Heap */
@@ -465,9 +429,11 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 #endif
 
 	makecrc();
-	putstr("\nDecompressing Linux... ");
+	if (!quiet)
+		putstr("\nDecompressing Linux... ");
 	gunzip();
 	parse_elf(output);
-	putstr("done.\nBooting the kernel.\n");
+	if (!quiet)
+		putstr("done.\nBooting the kernel.\n");
 	return;
 }
diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c
index edaadea90aaf..a1310c52fc0c 100644
--- a/arch/x86/boot/compressed/relocs.c
+++ b/arch/x86/boot/compressed/relocs.c
@@ -10,16 +10,20 @@
 #define USE_BSD
 #include <endian.h>
 
-#define MAX_SHDRS 100
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 static Elf32_Ehdr ehdr;
-static Elf32_Shdr shdr[MAX_SHDRS];
-static Elf32_Sym  *symtab[MAX_SHDRS];
-static Elf32_Rel  *reltab[MAX_SHDRS];
-static char *strtab[MAX_SHDRS];
 static unsigned long reloc_count, reloc_idx;
 static unsigned long *relocs;
 
+struct section {
+	Elf32_Shdr     shdr;
+	struct section *link;
+	Elf32_Sym      *symtab;
+	Elf32_Rel      *reltab;
+	char           *strtab;
+};
+static struct section *secs;
+
 /*
  * Following symbols have been audited. There values are constant and do
  * not change if bzImage is loaded at a different physical address than
@@ -35,7 +39,7 @@ static int is_safe_abs_reloc(const char* sym_name)
 {
 	int i;
 
-	for(i = 0; i < ARRAY_SIZE(safe_abs_relocs); i++) {
+	for (i = 0; i < ARRAY_SIZE(safe_abs_relocs); i++) {
 		if (!strcmp(sym_name, safe_abs_relocs[i]))
 			/* Match found */
 			return 1;
@@ -137,10 +141,10 @@ static const char *sec_name(unsigned shndx)
 {
 	const char *sec_strtab;
 	const char *name;
-	sec_strtab = strtab[ehdr.e_shstrndx];
+	sec_strtab = secs[ehdr.e_shstrndx].strtab;
 	name = "<noname>";
 	if (shndx < ehdr.e_shnum) {
-		name = sec_strtab + shdr[shndx].sh_name;
+		name = sec_strtab + secs[shndx].shdr.sh_name;
 	}
 	else if (shndx == SHN_ABS) {
 		name = "ABSOLUTE";
@@ -159,7 +163,7 @@ static const char *sym_name(const char *sym_strtab, Elf32_Sym *sym)
 		name = sym_strtab + sym->st_name;
 	}
 	else {
-		name = sec_name(shdr[sym->st_shndx].sh_name);
+		name = sec_name(secs[sym->st_shndx].shdr.sh_name);
 	}
 	return name;
 }
@@ -244,29 +248,34 @@ static void read_ehdr(FILE *fp)
 static void read_shdrs(FILE *fp)
 {
 	int i;
-	if (ehdr.e_shnum > MAX_SHDRS) {
-		die("%d section headers supported: %d\n",
-			ehdr.e_shnum, MAX_SHDRS);
+	Elf32_Shdr shdr;
+
+	secs = calloc(ehdr.e_shnum, sizeof(struct section));
+	if (!secs) {
+		die("Unable to allocate %d section headers\n",
+		    ehdr.e_shnum);
 	}
 	if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0) {
 		die("Seek to %d failed: %s\n",
 			ehdr.e_shoff, strerror(errno));
 	}
-	if (fread(&shdr, sizeof(shdr[0]), ehdr.e_shnum, fp) != ehdr.e_shnum) {
-		die("Cannot read ELF section headers: %s\n",
-			strerror(errno));
-	}
-	for(i = 0; i < ehdr.e_shnum; i++) {
-		shdr[i].sh_name      = elf32_to_cpu(shdr[i].sh_name);
-		shdr[i].sh_type      = elf32_to_cpu(shdr[i].sh_type);
-		shdr[i].sh_flags     = elf32_to_cpu(shdr[i].sh_flags);
-		shdr[i].sh_addr      = elf32_to_cpu(shdr[i].sh_addr);
-		shdr[i].sh_offset    = elf32_to_cpu(shdr[i].sh_offset);
-		shdr[i].sh_size      = elf32_to_cpu(shdr[i].sh_size);
-		shdr[i].sh_link      = elf32_to_cpu(shdr[i].sh_link);
-		shdr[i].sh_info      = elf32_to_cpu(shdr[i].sh_info);
-		shdr[i].sh_addralign = elf32_to_cpu(shdr[i].sh_addralign);
-		shdr[i].sh_entsize   = elf32_to_cpu(shdr[i].sh_entsize);
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (fread(&shdr, sizeof shdr, 1, fp) != 1)
+			die("Cannot read ELF section headers %d/%d: %s\n",
+			    i, ehdr.e_shnum, strerror(errno));
+		sec->shdr.sh_name      = elf32_to_cpu(shdr.sh_name);
+		sec->shdr.sh_type      = elf32_to_cpu(shdr.sh_type);
+		sec->shdr.sh_flags     = elf32_to_cpu(shdr.sh_flags);
+		sec->shdr.sh_addr      = elf32_to_cpu(shdr.sh_addr);
+		sec->shdr.sh_offset    = elf32_to_cpu(shdr.sh_offset);
+		sec->shdr.sh_size      = elf32_to_cpu(shdr.sh_size);
+		sec->shdr.sh_link      = elf32_to_cpu(shdr.sh_link);
+		sec->shdr.sh_info      = elf32_to_cpu(shdr.sh_info);
+		sec->shdr.sh_addralign = elf32_to_cpu(shdr.sh_addralign);
+		sec->shdr.sh_entsize   = elf32_to_cpu(shdr.sh_entsize);
+		if (sec->shdr.sh_link < ehdr.e_shnum)
+			sec->link = &secs[sec->shdr.sh_link];
 	}
 
 }
@@ -274,20 +283,22 @@ static void read_shdrs(FILE *fp)
 static void read_strtabs(FILE *fp)
 {
 	int i;
-	for(i = 0; i < ehdr.e_shnum; i++) {
-		if (shdr[i].sh_type != SHT_STRTAB) {
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_STRTAB) {
 			continue;
 		}
-		strtab[i] = malloc(shdr[i].sh_size);
-		if (!strtab[i]) {
+		sec->strtab = malloc(sec->shdr.sh_size);
+		if (!sec->strtab) {
 			die("malloc of %d bytes for strtab failed\n",
-				shdr[i].sh_size);
+				sec->shdr.sh_size);
 		}
-		if (fseek(fp, shdr[i].sh_offset, SEEK_SET) < 0) {
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
 			die("Seek to %d failed: %s\n",
-				shdr[i].sh_offset, strerror(errno));
+				sec->shdr.sh_offset, strerror(errno));
 		}
-		if (fread(strtab[i], 1, shdr[i].sh_size, fp) != shdr[i].sh_size) {
+		if (fread(sec->strtab, 1, sec->shdr.sh_size, fp)
+		    != sec->shdr.sh_size) {
 			die("Cannot read symbol table: %s\n",
 				strerror(errno));
 		}
@@ -297,28 +308,31 @@ static void read_strtabs(FILE *fp)
 static void read_symtabs(FILE *fp)
 {
 	int i,j;
-	for(i = 0; i < ehdr.e_shnum; i++) {
-		if (shdr[i].sh_type != SHT_SYMTAB) {
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_SYMTAB) {
 			continue;
 		}
-		symtab[i] = malloc(shdr[i].sh_size);
-		if (!symtab[i]) {
+		sec->symtab = malloc(sec->shdr.sh_size);
+		if (!sec->symtab) {
 			die("malloc of %d bytes for symtab failed\n",
-				shdr[i].sh_size);
+				sec->shdr.sh_size);
 		}
-		if (fseek(fp, shdr[i].sh_offset, SEEK_SET) < 0) {
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
 			die("Seek to %d failed: %s\n",
-				shdr[i].sh_offset, strerror(errno));
+				sec->shdr.sh_offset, strerror(errno));
 		}
-		if (fread(symtab[i], 1, shdr[i].sh_size, fp) != shdr[i].sh_size) {
+		if (fread(sec->symtab, 1, sec->shdr.sh_size, fp)
+		    != sec->shdr.sh_size) {
 			die("Cannot read symbol table: %s\n",
 				strerror(errno));
 		}
-		for(j = 0; j < shdr[i].sh_size/sizeof(symtab[i][0]); j++) {
-			symtab[i][j].st_name  = elf32_to_cpu(symtab[i][j].st_name);
-			symtab[i][j].st_value = elf32_to_cpu(symtab[i][j].st_value);
-			symtab[i][j].st_size  = elf32_to_cpu(symtab[i][j].st_size);
-			symtab[i][j].st_shndx = elf16_to_cpu(symtab[i][j].st_shndx);
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
+			Elf32_Sym *sym = &sec->symtab[j];
+			sym->st_name  = elf32_to_cpu(sym->st_name);
+			sym->st_value = elf32_to_cpu(sym->st_value);
+			sym->st_size  = elf32_to_cpu(sym->st_size);
+			sym->st_shndx = elf16_to_cpu(sym->st_shndx);
 		}
 	}
 }
@@ -327,26 +341,29 @@ static void read_symtabs(FILE *fp)
 static void read_relocs(FILE *fp)
 {
 	int i,j;
-	for(i = 0; i < ehdr.e_shnum; i++) {
-		if (shdr[i].sh_type != SHT_REL) {
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_REL) {
 			continue;
 		}
-		reltab[i] = malloc(shdr[i].sh_size);
-		if (!reltab[i]) {
+		sec->reltab = malloc(sec->shdr.sh_size);
+		if (!sec->reltab) {
 			die("malloc of %d bytes for relocs failed\n",
-				shdr[i].sh_size);
+				sec->shdr.sh_size);
 		}
-		if (fseek(fp, shdr[i].sh_offset, SEEK_SET) < 0) {
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) {
 			die("Seek to %d failed: %s\n",
-				shdr[i].sh_offset, strerror(errno));
+				sec->shdr.sh_offset, strerror(errno));
 		}
-		if (fread(reltab[i], 1, shdr[i].sh_size, fp) != shdr[i].sh_size) {
+		if (fread(sec->reltab, 1, sec->shdr.sh_size, fp)
+		    != sec->shdr.sh_size) {
 			die("Cannot read symbol table: %s\n",
 				strerror(errno));
 		}
-		for(j = 0; j < shdr[i].sh_size/sizeof(reltab[0][0]); j++) {
-			reltab[i][j].r_offset = elf32_to_cpu(reltab[i][j].r_offset);
-			reltab[i][j].r_info   = elf32_to_cpu(reltab[i][j].r_info);
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
+			Elf32_Rel *rel = &sec->reltab[j];
+			rel->r_offset = elf32_to_cpu(rel->r_offset);
+			rel->r_info   = elf32_to_cpu(rel->r_info);
 		}
 	}
 }
@@ -357,19 +374,21 @@ static void print_absolute_symbols(void)
 	int i;
 	printf("Absolute symbols\n");
 	printf(" Num:    Value Size  Type       Bind        Visibility  Name\n");
-	for(i = 0; i < ehdr.e_shnum; i++) {
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
 		char *sym_strtab;
 		Elf32_Sym *sh_symtab;
 		int j;
-		if (shdr[i].sh_type != SHT_SYMTAB) {
+
+		if (sec->shdr.sh_type != SHT_SYMTAB) {
 			continue;
 		}
-		sh_symtab = symtab[i];
-		sym_strtab = strtab[shdr[i].sh_link];
-		for(j = 0; j < shdr[i].sh_size/sizeof(symtab[0][0]); j++) {
+		sh_symtab = sec->symtab;
+		sym_strtab = sec->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
 			Elf32_Sym *sym;
 			const char *name;
-			sym = &symtab[i][j];
+			sym = &sec->symtab[j];
 			name = sym_name(sym_strtab, sym);
 			if (sym->st_shndx != SHN_ABS) {
 				continue;
@@ -389,26 +408,27 @@ static void print_absolute_relocs(void)
 {
 	int i, printed = 0;
 
-	for(i = 0; i < ehdr.e_shnum; i++) {
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		struct section *sec_applies, *sec_symtab;
 		char *sym_strtab;
 		Elf32_Sym *sh_symtab;
-		unsigned sec_applies, sec_symtab;
 		int j;
-		if (shdr[i].sh_type != SHT_REL) {
+		if (sec->shdr.sh_type != SHT_REL) {
 			continue;
 		}
-		sec_symtab  = shdr[i].sh_link;
-		sec_applies = shdr[i].sh_info;
-		if (!(shdr[sec_applies].sh_flags & SHF_ALLOC)) {
+		sec_symtab  = sec->link;
+		sec_applies = &secs[sec->shdr.sh_info];
+		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
 			continue;
 		}
-		sh_symtab = symtab[sec_symtab];
-		sym_strtab = strtab[shdr[sec_symtab].sh_link];
-		for(j = 0; j < shdr[i].sh_size/sizeof(reltab[0][0]); j++) {
+		sh_symtab  = sec_symtab->symtab;
+		sym_strtab = sec_symtab->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
 			Elf32_Rel *rel;
 			Elf32_Sym *sym;
 			const char *name;
-			rel = &reltab[i][j];
+			rel = &sec->reltab[j];
 			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
 			name = sym_name(sym_strtab, sym);
 			if (sym->st_shndx != SHN_ABS) {
@@ -456,26 +476,28 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
 {
 	int i;
 	/* Walk through the relocations */
-	for(i = 0; i < ehdr.e_shnum; i++) {
+	for (i = 0; i < ehdr.e_shnum; i++) {
 		char *sym_strtab;
 		Elf32_Sym *sh_symtab;
-		unsigned sec_applies, sec_symtab;
+		struct section *sec_applies, *sec_symtab;
 		int j;
-		if (shdr[i].sh_type != SHT_REL) {
+		struct section *sec = &secs[i];
+
+		if (sec->shdr.sh_type != SHT_REL) {
 			continue;
 		}
-		sec_symtab  = shdr[i].sh_link;
-		sec_applies = shdr[i].sh_info;
-		if (!(shdr[sec_applies].sh_flags & SHF_ALLOC)) {
+		sec_symtab  = sec->link;
+		sec_applies = &secs[sec->shdr.sh_info];
+		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
 			continue;
 		}
-		sh_symtab = symtab[sec_symtab];
-		sym_strtab = strtab[shdr[sec_symtab].sh_link];
-		for(j = 0; j < shdr[i].sh_size/sizeof(reltab[0][0]); j++) {
+		sh_symtab = sec_symtab->symtab;
+		sym_strtab = sec->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
 			Elf32_Rel *rel;
 			Elf32_Sym *sym;
 			unsigned r_type;
-			rel = &reltab[i][j];
+			rel = &sec->reltab[j];
 			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
 			r_type = ELF32_R_TYPE(rel->r_info);
 			/* Don't visit relocations to absolute symbols */
@@ -539,7 +561,7 @@ static void emit_relocs(int as_text)
 		 */
 		printf(".section \".data.reloc\",\"a\"\n");
 		printf(".balign 4\n");
-		for(i = 0; i < reloc_count; i++) {
+		for (i = 0; i < reloc_count; i++) {
 			printf("\t .long 0x%08lx\n", relocs[i]);
 		}
 		printf("\n");
@@ -550,7 +572,7 @@ static void emit_relocs(int as_text)
 		/* Print a stop */
 		printf("%c%c%c%c", buf[0], buf[1], buf[2], buf[3]);
 		/* Now print each relocation */
-		for(i = 0; i < reloc_count; i++) {
+		for (i = 0; i < reloc_count; i++) {
 			buf[0] = (relocs[i] >>  0) & 0xff;
 			buf[1] = (relocs[i] >>  8) & 0xff;
 			buf[2] = (relocs[i] >> 16) & 0xff;
@@ -577,7 +599,7 @@ int main(int argc, char **argv)
 	show_absolute_relocs = 0;
 	as_text = 0;
 	fname = NULL;
-	for(i = 1; i < argc; i++) {
+	for (i = 1; i < argc; i++) {
 		char *arg = argv[i];
 		if (*arg == '-') {
 			if (strcmp(argv[1], "--abs-syms") == 0) {
diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c
index 00e19edd852c..92d6fd73dc7d 100644
--- a/arch/x86/boot/cpu.c
+++ b/arch/x86/boot/cpu.c
@@ -28,6 +28,8 @@ static char *cpu_name(int level)
 	if (level == 64) {
 		return "x86-64";
 	} else {
+		if (level == 15)
+			level = 6;
 		sprintf(buf, "i%d86", level);
 		return buf;
 	}
diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c
index 03399d64013b..d93cbc6464d0 100644
--- a/arch/x86/boot/edd.c
+++ b/arch/x86/boot/edd.c
@@ -167,9 +167,8 @@ void query_edd(void)
 		 * Scan the BIOS-supported hard disks and query EDD
 		 * information...
 		 */
-		get_edd_info(devno, &ei);
-
-		if (boot_params.eddbuf_entries < EDDMAXNR) {
+		if (!get_edd_info(devno, &ei)
+		    && boot_params.eddbuf_entries < EDDMAXNR) {
 			memcpy(edp, &ei, sizeof ei);
 			edp++;
 			boot_params.eddbuf_entries++;
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 77569a4a3be1..2296164b54d2 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -165,6 +165,10 @@ void main(void)
 	/* Set the video mode */
 	set_video();
 
+	/* Parse command line for 'quiet' and pass it to decompressor. */
+	if (cmdline_find_option_bool("quiet"))
+		boot_params.hdr.loadflags |= QUIET_FLAG;
+
 	/* Do the last things and invoke protected mode */
 	go_to_protected_mode();
 }
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index acad32eb4290..53165c97336b 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -13,6 +13,7 @@
  */
 
 #include "boot.h"
+#include <linux/kernel.h>
 
 #define SMAP	0x534d4150	/* ASCII "SMAP" */
 
@@ -53,7 +54,7 @@ static int detect_memory_e820(void)
 
 		count++;
 		desc++;
-	} while (next && count < E820MAX);
+	} while (next && count < ARRAY_SIZE(boot_params.e820_map));
 
 	return boot_params.e820_entries = count;
 }
diff --git a/arch/x86/boot/pm.c b/arch/x86/boot/pm.c
index 328956fdb59e..85a1cd8a8ff8 100644
--- a/arch/x86/boot/pm.c
+++ b/arch/x86/boot/pm.c
@@ -98,12 +98,6 @@ static void reset_coprocessor(void)
 /*
  * Set up the GDT
  */
-#define GDT_ENTRY(flags, base, limit)		\
-	(((u64)(base & 0xff000000) << 32) |	\
-	 ((u64)flags << 40) |			\
-	 ((u64)(limit & 0x00ff0000) << 32) |	\
-	 ((u64)(base & 0x00ffffff) << 16) |	\
-	 ((u64)(limit & 0x0000ffff)))
 
 struct gdt_ptr {
 	u16 len;
diff --git a/arch/x86/boot/pmjump.S b/arch/x86/boot/pmjump.S
index ab049d40a884..141b6e20ed31 100644
--- a/arch/x86/boot/pmjump.S
+++ b/arch/x86/boot/pmjump.S
@@ -33,6 +33,8 @@ protected_mode_jump:
 	movw	%cs, %bx
 	shll	$4, %ebx
 	addl	%ebx, 2f
+	jmp	1f			# Short jump to serialize on 386/486
+1:
 
 	movw	$__BOOT_DS, %cx
 	movw	$__BOOT_TSS, %di
@@ -40,8 +42,6 @@ protected_mode_jump:
 	movl	%cr0, %edx
 	orb	$X86_CR0_PE, %dl	# Protected mode
 	movl	%edx, %cr0
-	jmp	1f			# Short jump to serialize on 386/486
-1:
 
 	# Transition to 32-bit mode
 	.byte	0x66, 0xea		# ljmpl opcode
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 40ecb8d7688c..b939cb476dec 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -259,8 +259,7 @@ static int vga_probe(void)
 	return mode_count[adapter];
 }
 
-__videocard video_vga =
-{
+__videocard video_vga = {
 	.card_name	= "VGA",
 	.probe		= vga_probe,
 	.set_mode	= vga_set_mode,
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index ad7ddaaff588..4d73f53287b6 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,54 +1,103 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-git14
-# Fri Jul 20 09:53:15 2007
+# Linux kernel version: 2.6.26-rc1
+# Sun May  4 19:59:02 2008
 #
+# CONFIG_64BIT is not set
 CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+CONFIG_X86=y
+CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
+# CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_CLOCKSOURCE_WATCHDOG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_X86=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_FAST_CMPXCHG_LOCAL=y
 CONFIG_MMU=y
 CONFIG_ZONE_DMA=y
-CONFIG_QUICKLIST=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_HWEIGHT=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DMI=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ZONE_DMA32 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_X86_SMP=y
+CONFIG_X86_32_SMP=y
+CONFIG_X86_HT=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
+CONFIG_KTIME_SCALAR=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -56,13 +105,15 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -76,6 +127,17 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -87,10 +149,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_KMOD is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LBD is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_BSG=y
 
 #
 # IO Schedulers
@@ -103,7 +165,8 @@ CONFIG_IOSCHED_CFQ=y
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Processor type and features
@@ -111,18 +174,21 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-# CONFIG_X86_PC is not set
+CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_NUMAQ is not set
 # CONFIG_X86_SUMMIT is not set
 # CONFIG_X86_BIGSMP is not set
 # CONFIG_X86_VISWS is not set
-CONFIG_X86_GENERICARCH=y
+# CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_ES7000 is not set
-# CONFIG_PARAVIRT is not set
-CONFIG_X86_CYCLONE_TIMER=y
+# CONFIG_X86_RDC321X is not set
+# CONFIG_X86_VSMP is not set
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -130,9 +196,8 @@ CONFIG_X86_CYCLONE_TIMER=y
 # CONFIG_M586MMX is not set
 # CONFIG_M686 is not set
 # CONFIG_MPENTIUMII is not set
-CONFIG_MPENTIUMIII=y
+# CONFIG_MPENTIUMIII is not set
 # CONFIG_MPENTIUMM is not set
-# CONFIG_MCORE2 is not set
 # CONFIG_MPENTIUM4 is not set
 # CONFIG_MK6 is not set
 # CONFIG_MK7 is not set
@@ -147,14 +212,14 @@ CONFIG_MPENTIUMIII=y
 # CONFIG_MCYRIXIII is not set
 # CONFIG_MVIAC3_2 is not set
 # CONFIG_MVIAC7 is not set
-CONFIG_X86_GENERIC=y
+# CONFIG_MPSC is not set
+CONFIG_MCORE2=y
+# CONFIG_GENERIC_CPU is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_CPU=y
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=6
 CONFIG_X86_XADD=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INVLPG=y
 CONFIG_X86_BSWAP=y
@@ -162,106 +227,120 @@ CONFIG_X86_POPAD_OK=y
 CONFIG_X86_GOOD_APIC=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_X86_MINIMUM_CPU_FAMILY=6
+CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
-CONFIG_NR_CPUS=32
-CONFIG_SCHED_SMT=y
+CONFIG_DMI=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_NR_CPUS=4
+# CONFIG_SCHED_SMT is not set
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_NONFATAL=y
-CONFIG_X86_MCE_P4THERMAL=y
+# CONFIG_X86_MCE is not set
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
 # CONFIG_X86_REBOOTFIXUPS is not set
-CONFIG_MICROCODE=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
+# CONFIG_MICROCODE is not set
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-# CONFIG_DELL_RBU is not set
-# CONFIG_DCDBAS is not set
-CONFIG_DMIID=y
 # CONFIG_NOHIGHMEM is not set
 CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_NEED_NODE_MEMMAP_SIZE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
-CONFIG_NR_QUICK=1
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_HIGHPTE is not set
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MTRR=y
-# CONFIG_EFI is not set
+# CONFIG_X86_PAT is not set
+CONFIG_EFI=y
 # CONFIG_IRQBALANCE is not set
 CONFIG_SECCOMP=y
 # CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x100000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x100000
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_COMPAT_VDSO=y
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_RELOCATABLE=y
+CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_COMPAT_VDSO is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 
 #
-# Power management options (ACPI, APM)
+# Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
 CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
 CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
 CONFIG_ACPI_AC=y
 CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_FAN=y
-# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_DOCK=y
+# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_WMI is not set
 # CONFIG_ACPI_ASUS is not set
 # CONFIG_ACPI_TOSHIBA is not set
-CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=y
 # CONFIG_ACPI_SBS is not set
 # CONFIG_APM is not set
 
@@ -271,15 +350,17 @@ CONFIG_X86_PM_TIMER=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 
 #
 # CPUFreq processor drivers
@@ -287,8 +368,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 CONFIG_X86_ACPI_CPUFREQ=y
 # CONFIG_X86_POWERNOW_K6 is not set
 # CONFIG_X86_POWERNOW_K7 is not set
-CONFIG_X86_POWERNOW_K8=y
-CONFIG_X86_POWERNOW_K8_ACPI=y
+# CONFIG_X86_POWERNOW_K8 is not set
 # CONFIG_X86_GX_SUSPMOD is not set
 # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
 # CONFIG_X86_SPEEDSTEP_ICH is not set
@@ -302,43 +382,72 @@ CONFIG_X86_POWERNOW_K8_ACPI=y
 #
 # shared options
 #
-CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
+# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
 # CONFIG_X86_SPEEDSTEP_LIB is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+# Bus options (PCI etc.)
 #
 CONFIG_PCI=y
 # CONFIG_PCI_GOBIOS is not set
 # CONFIG_PCI_GOMMCONFIG is not set
 # CONFIG_PCI_GODIRECT is not set
 CONFIG_PCI_GOANY=y
+# CONFIG_PCI_GOOLPC is not set
 CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCIEPORTBUS is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
-# CONFIG_HT_IRQ is not set
+CONFIG_HT_IRQ=y
 CONFIG_ISA_DMA_API=y
 # CONFIG_ISA is not set
 # CONFIG_MCA is not set
 # CONFIG_SCx200 is not set
+# CONFIG_OLPC is not set
 CONFIG_K8_NB=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_IBM is not set
+# CONFIG_HOTPLUG_PCI_ACPI is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# Executable file formats / Emulations
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=y
 
 #
 # Networking
@@ -349,59 +458,142 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
 # CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
+CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
 CONFIG_TCP_CONG_CUBIC=y
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
 # CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
 # CONFIG_INET6_IPCOMP is not set
 # CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_INET6_XFRM_MODE_TRANSPORT=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
-# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
+# CONFIG_IPV6_MROUTE is not set
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_LOG=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_IRC=y
+CONFIG_NF_CONNTRACK_SIP=y
+CONFIG_NF_CT_NETLINK=y
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_MARK=y
+CONFIG_NETFILTER_XT_TARGET_NFLOG=y
+CONFIG_NETFILTER_XT_TARGET_SECMARK=y
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+CONFIG_NETFILTER_XT_MATCH_POLICY=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_NF_NAT_FTP=y
+CONFIG_NF_NAT_IRC=y
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=y
+CONFIG_IP_NF_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_MATCH_IPV6HEADER=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_MANGLE=y
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
@@ -409,6 +601,7 @@ CONFIG_IPV6_SIT=y
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
+CONFIG_LLC=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -416,28 +609,99 @@ CONFIG_IPV6_SIT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+# CONFIG_NET_EMATCH_U32 is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_TEXT is not set
+CONFIG_NET_CLS_ACT=y
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
 
 #
 # Wireless
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -449,13 +713,15 @@ CONFIG_IPV6_SIT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
@@ -466,7 +732,7 @@ CONFIG_PNP=y
 #
 CONFIG_PNPACPI=y
 CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -479,8 +745,8 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -489,73 +755,17 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ACER_WMI is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_TC1100_WMI is not set
+# CONFIG_MSI_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -564,8 +774,8 @@ CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-# CONFIG_SCSI_PROC_FS is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -574,7 +784,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
 
@@ -582,7 +792,7 @@ CONFIG_CHR_DEV_SG=y
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
 # CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
 CONFIG_SCSI_WAIT_SCAN=m
@@ -591,81 +801,37 @@ CONFIG_SCSI_WAIT_SCAN=m
 # SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-CONFIG_SCSI_AIC79XX=y
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
-CONFIG_AIC79XX_RESET_DELAY_MS=4000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-CONFIG_SATA_SVW=y
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
 CONFIG_ATA_PIIX=y
 # CONFIG_SATA_MV is not set
-CONFIG_SATA_NV=y
+# CONFIG_SATA_NV is not set
 # CONFIG_PDC_ADMA is not set
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIL is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
-CONFIG_SATA_VIA=y
+# CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ACPI is not set
 # CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
+CONFIG_PATA_AMD=y
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
@@ -673,6 +839,7 @@ CONFIG_SATA_VIA=y
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
 # CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
 # CONFIG_PATA_CYPRESS is not set
 # CONFIG_PATA_EFAR is not set
 # CONFIG_ATA_GENERIC is not set
@@ -686,11 +853,14 @@ CONFIG_SATA_VIA=y
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
+CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
@@ -702,65 +872,42 @@ CONFIG_SATA_VIA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_MD=y
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID456 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
 # CONFIG_DM_DEBUG is not set
 # CONFIG_DM_CRYPT is not set
 # CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
 # CONFIG_DM_MULTIPATH is not set
 # CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-CONFIG_FUSION_MAX_SGE=128
-# CONFIG_FUSION_CTL is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
 # CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-
-#
-# Controllers
-#
-
-#
-# Texas Instruments PCILynx requires I2C
-#
-CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-# CONFIG_IEEE1394_VIDEO1394 is not set
-# CONFIG_IEEE1394_SBP2 is not set
-# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
-# CONFIG_IEEE1394_ETH1394 is not set
-# CONFIG_IEEE1394_DV1394 is not set
-CONFIG_IEEE1394_RAWIO=y
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
+CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
@@ -770,38 +917,40 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
+# CONFIG_VORTEX is not set
 # CONFIG_TYPHOON is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
+# CONFIG_TULIP is not set
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
+# CONFIG_PCMCIA_XIRCOM is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-CONFIG_B44=y
+# CONFIG_B44 is not set
 CONFIG_FORCEDETH=y
 # CONFIG_FORCEDETH_NAPI is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
-CONFIG_8139CP=y
+# CONFIG_8139CP is not set
 CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_PIO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -814,34 +963,75 @@ CONFIG_NETDEV_1000=y
 CONFIG_E1000=y
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
-CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
+# CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-CONFIG_BNX2=y
+# CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
-# CONFIG_TR is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+CONFIG_TR=y
+# CONFIG_IBMOL is not set
+# CONFIG_IBMLS is not set
+# CONFIG_3C359 is not set
+# CONFIG_TMS380TR is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_ATH5K=y
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
 
 #
 # USB Network Adapters
@@ -850,16 +1040,27 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_PCMCIA_IBMTR is not set
 # CONFIG_WAN is not set
-# CONFIG_FDDI is not set
+CONFIG_FDDI=y
+# CONFIG_DEFXX is not set
+# CONFIG_SKFP is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 # CONFIG_NETPOLL_TRAP is not set
 CONFIG_NET_POLL_CONTROLLER=y
@@ -870,18 +1071,17 @@ CONFIG_NET_POLL_CONTROLLER=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
 
 #
 # Userland interfaces
 #
 CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -906,17 +1106,63 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_JOYSTICK_XPAD is not set
+CONFIG_INPUT_TABLET=y
+# CONFIG_TABLET_USB_ACECAD is not set
+# CONFIG_TABLET_USB_AIPTEK is not set
+# CONFIG_TABLET_USB_GTCO is not set
+# CONFIG_TABLET_USB_KBTAB is not set
+# CONFIG_TABLET_USB_WACOM is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
 CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
@@ -929,8 +1175,26 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -940,9 +1204,14 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_FIX_EARLYCON_MEM=y
 CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=32
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
 
 #
 # Non-8250 serial port support
@@ -951,89 +1220,275 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_INTEL=y
-CONFIG_HW_RANDOM_AMD=y
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_AMD is not set
 CONFIG_HW_RANDOM_GEODE=y
 CONFIG_HW_RANDOM_VIA=y
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
+CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_SONYPI is not set
-CONFIG_AGP=y
-# CONFIG_AGP_ALI is not set
-# CONFIG_AGP_ATI is not set
-# CONFIG_AGP_AMD is not set
-CONFIG_AGP_AMD64=y
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_NVIDIA is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
-# CONFIG_AGP_EFFICEON is not set
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_MWAVE is not set
 # CONFIG_PC8736x_GPIO is not set
 # CONFIG_NSC_GPIO is not set
 # CONFIG_CS5535_GPIO is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
+# CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
-CONFIG_HPET_MMAP=y
+# CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_TELCLOCK is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+CONFIG_I2C_I801=y
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_ITCO_WDT is not set
+# CONFIG_IT8712F_WDT is not set
+# CONFIG_HP_WATCHDOG is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_AGP=y
+# CONFIG_AGP_ALI is not set
+# CONFIG_AGP_ATI is not set
+# CONFIG_AGP_AMD is not set
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+# CONFIG_AGP_NVIDIA is not set
+# CONFIG_AGP_SIS is not set
+# CONFIG_AGP_SWORKS is not set
+# CONFIG_AGP_VIA is not set
+# CONFIG_AGP_EFFICEON is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_I810 is not set
+# CONFIG_DRM_I830 is not set
+CONFIG_DRM_I915=y
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_VESA is not set
+CONFIG_FB_EFI=y
+# CONFIG_FB_IMAC is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+# CONFIG_BACKLIGHT_PROGEAR is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
 CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
@@ -1043,33 +1498,167 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_PCSP is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
 
 #
 # Open Sound System
 #
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID_DEBUG=y
+CONFIG_HIDRAW=y
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_PANTHERLORD_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
 # Miscellaneous USB options
@@ -1077,18 +1666,18 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
+CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1121,8 +1710,10 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
@@ -1134,10 +1725,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1163,90 +1750,125 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 
 #
-# USB DSL modem support
+# LED drivers
 #
+# CONFIG_LEDS_CLEVO_MAIL is not set
 
 #
-# USB Gadget Support
+# LED Triggers
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
 
 #
-# LED devices
+# Reporting subsystems
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC_DEBUG is not set
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
 
 #
-# LED drivers
+# RTC interfaces
 #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# LED Triggers
+# I2C RTC drivers
 #
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
-# Real Time Clock
+# SPI RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
+# Platform RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Clients
+# on-CPU RTC drivers
 #
+CONFIG_DMADEVICES=y
 
 #
 # DMA Devices
 #
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
+# CONFIG_INTEL_IOATDMA is not set
+# CONFIG_UIO is not set
 
 #
-# Userspace I/O
+# Firmware Drivers
 #
-# CONFIG_UIO is not set
+# CONFIG_EDD is not set
+CONFIG_EFI_VARS=y
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+CONFIG_DMIID=y
+# CONFIG_ISCSI_IBFT_FIND is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT3_FS_SECURITY=y
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-# CONFIG_REISERFS_FS_SECURITY is not set
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1256,8 +1878,8 @@ CONFIG_GENERIC_ACL=y
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
 # CONFIG_UDF_FS is not set
 
 #
@@ -1275,13 +1897,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1289,6 +1911,7 @@ CONFIG_RAMFS=y
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1296,33 +1919,15 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -1332,14 +1937,26 @@ CONFIG_SUNRPC=y
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
@@ -1374,37 +1991,33 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_9 is not set
 # CONFIG_NLS_ISO8859_13 is not set
 # CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-# CONFIG_DEBUG_FS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1419,48 +2032,174 @@ CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_SAMPLES is not set
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_STRICT_DEVMEM is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_RODATA is not set
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+# CONFIG_DEBUG_RODATA_TEST is not set
+CONFIG_DEBUG_NX_TEST=m
 # CONFIG_4KSTACKS is not set
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
 CONFIG_DOUBLEFAULT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+CONFIG_DEBUG_BOOT_PARAMS=y
+# CONFIG_CPA_DEBUG is not set
 
 #
 # Security options
 #
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
+# CONFIG_CRYPTO_DEV_GEODE is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
+# CONFIG_LGUEST is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTIO_BALLOON is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
-CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_KTIME_SCALAR=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 2d6f5b2809d2..a40452429625 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,64 +1,103 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-git14
-# Fri Jul 20 09:53:15 2007
+# Linux kernel version: 2.6.26-rc1
+# Sun May  4 19:59:57 2008
 #
-CONFIG_X86_64=y
 CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
 CONFIG_X86=y
+CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig"
+# CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_ZONE_DMA32=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_FAST_CMPXCHG_LOCAL=y
 CONFIG_MMU=y
 CONFIG_ZONE_DMA=y
-CONFIG_QUICKLIST=y
-CONFIG_NR_QUICK=2
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_IOMAP=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_DMI=y
-CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_X86_SMP=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
+# CONFIG_KTIME_SCALAR is not set
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -66,13 +105,15 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -82,9 +123,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -96,14 +149,15 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_KMOD is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
 # CONFIG_DEFAULT_AS is not set
@@ -111,107 +165,177 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Processor type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
 CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_MEMTEST_BOOTPARAM=y
+CONFIG_MEMTEST_BOOTPARAM_VALUE=0
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
 # CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
 # CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=128
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_X86_INTERNODE_CACHE_BYTES=128
-CONFIG_X86_TSC=y
+CONFIG_MCORE2=y
+# CONFIG_GENERIC_CPU is not set
+CONFIG_X86_CPU=y
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
 CONFIG_X86_GOOD_APIC=y
-# CONFIG_MICROCODE is not set
-CONFIG_X86_MSR=y
-CONFIG_X86_CPUID=y
-CONFIG_X86_HT=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_LOCAL_APIC=y
-CONFIG_MTRR=y
-CONFIG_SMP=y
-CONFIG_SCHED_SMT=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_P6_NOP=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+CONFIG_CALGARY_IOMMU=y
+CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_NR_CPUS=4
+# CONFIG_SCHED_SMT is not set
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+# CONFIG_X86_MCE is not set
+# CONFIG_I8K is not set
+# CONFIG_MICROCODE is not set
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=y
 CONFIG_NUMA=y
 CONFIG_K8_NUMA=y
-CONFIG_NODES_SHIFT=6
 CONFIG_X86_64_ACPI_NUMA=y
-CONFIG_NUMA_EMU=y
+CONFIG_NODES_SPAN_OTHER_NODES=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=6
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
 CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
-CONFIG_NR_CPUS=32
-CONFIG_PHYSICAL_ALIGN=0x200000
-CONFIG_HOTPLUG_CPU=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_GART_IOMMU=y
-# CONFIG_CALGARY_IOMMU is not set
-CONFIG_SWIOTLB=y
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_AMD=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_START=0x200000
+CONFIG_MTRR=y
+# CONFIG_X86_PAT is not set
+CONFIG_EFI=y
 CONFIG_SECCOMP=y
-# CONFIG_CC_STACKPROTECTOR is not set
 # CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_K8_NB=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ISA_DMA_API=y
-CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_RELOCATABLE=y
+CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_COMPAT_VDSO is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_HEADER=y
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
 CONFIG_ACPI=y
 CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SLEEP_PROC_FS=y
-CONFIG_ACPI_SLEEP_PROC_SLEEP=y
 CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
 CONFIG_ACPI_AC=y
 CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_FAN=y
-# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_DOCK=y
+# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_NUMA=y
+# CONFIG_ACPI_WMI is not set
 # CONFIG_ACPI_ASUS is not set
 # CONFIG_ACPI_TOSHIBA is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
@@ -227,29 +351,34 @@ CONFIG_ACPI_CONTAINER=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 
 #
 # CPUFreq processor drivers
 #
-CONFIG_X86_POWERNOW_K8=y
-CONFIG_X86_POWERNOW_K8_ACPI=y
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
 CONFIG_X86_ACPI_CPUFREQ=y
+# CONFIG_X86_POWERNOW_K8 is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+# CONFIG_X86_P4_CLOCKMOD is not set
 
 #
 # shared options
 #
-CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
+# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
 # CONFIG_X86_SPEEDSTEP_LIB is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Bus options (PCI etc.)
@@ -257,27 +386,56 @@ CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
 CONFIG_PCI=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_DMAR=y
+CONFIG_DMAR_GFX_WA=y
+CONFIG_DMAR_FLOPPY_WA=y
 CONFIG_PCIEPORTBUS=y
+# CONFIG_HOTPLUG_PCI_PCIE is not set
 CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
-# CONFIG_HT_IRQ is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HT_IRQ=y
+CONFIG_ISA_DMA_API=y
+CONFIG_K8_NB=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_ACPI is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
 
 #
 # Executable file formats / Emulations
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
 CONFIG_IA32_EMULATION=y
-CONFIG_IA32_AOUT=y
+# CONFIG_IA32_AOUT is not set
 CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
 CONFIG_SYSVIPC_COMPAT=y
 
 #
@@ -289,22 +447,31 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
 # CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
+CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -313,31 +480,109 @@ CONFIG_INET_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
 CONFIG_TCP_CONG_CUBIC=y
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
 # CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
 # CONFIG_INET6_IPCOMP is not set
 # CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
+# CONFIG_IPV6_MROUTE is not set
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_LOG=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_IRC=y
+CONFIG_NF_CONNTRACK_SIP=y
+CONFIG_NF_CT_NETLINK=y
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_MARK=y
+CONFIG_NETFILTER_XT_TARGET_NFLOG=y
+CONFIG_NETFILTER_XT_TARGET_SECMARK=y
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+CONFIG_NETFILTER_XT_MATCH_POLICY=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_NF_NAT_FTP=y
+CONFIG_NF_NAT_IRC=y
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=y
+CONFIG_IP_NF_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_MATCH_IPV6HEADER=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_MANGLE=y
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
@@ -345,6 +590,7 @@ CONFIG_IPV6_SIT=y
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
+CONFIG_LLC=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -352,28 +598,99 @@ CONFIG_IPV6_SIT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+# CONFIG_NET_EMATCH_U32 is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_TEXT is not set
+CONFIG_NET_CLS_ACT=y
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
 
 #
 # Wireless
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -385,13 +702,15 @@ CONFIG_IPV6_SIT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
@@ -402,7 +721,7 @@ CONFIG_PNP=y
 #
 CONFIG_PNPACPI=y
 CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -415,8 +734,8 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -425,72 +744,16 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ACER_WMI is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_MSI_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-CONFIG_BLK_DEV_ATIIXP=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -499,8 +762,8 @@ CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-# CONFIG_SCSI_PROC_FS is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -509,7 +772,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
 
@@ -526,73 +789,37 @@ CONFIG_SCSI_WAIT_SCAN=m
 # SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-CONFIG_SCSI_AIC79XX=y
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
-CONFIG_AIC79XX_RESET_DELAY_MS=4000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-CONFIG_SATA_SVW=y
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
 CONFIG_ATA_PIIX=y
 # CONFIG_SATA_MV is not set
-CONFIG_SATA_NV=y
+# CONFIG_SATA_NV is not set
 # CONFIG_PDC_ADMA is not set
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIL is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
-CONFIG_SATA_VIA=y
+# CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ACPI is not set
 # CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
+CONFIG_PATA_AMD=y
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
@@ -612,11 +839,14 @@ CONFIG_SATA_VIA=y
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
+CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
@@ -628,65 +858,42 @@ CONFIG_SATA_VIA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_MD=y
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID456 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
 # CONFIG_DM_DEBUG is not set
 # CONFIG_DM_CRYPT is not set
 # CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
 # CONFIG_DM_MULTIPATH is not set
 # CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-CONFIG_FUSION_MAX_SGE=128
-# CONFIG_FUSION_CTL is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
 # CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-
-#
-# Controllers
-#
-
-#
-# Texas Instruments PCILynx requires I2C
-#
-CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-# CONFIG_IEEE1394_VIDEO1394 is not set
-# CONFIG_IEEE1394_SBP2 is not set
-# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
-# CONFIG_IEEE1394_ETH1394 is not set
-# CONFIG_IEEE1394_DV1394 is not set
-CONFIG_IEEE1394_RAWIO=y
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
+CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
@@ -696,39 +903,40 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
+# CONFIG_VORTEX is not set
 # CONFIG_TYPHOON is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
+# CONFIG_TULIP is not set
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
+# CONFIG_PCMCIA_XIRCOM is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
-CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
+# CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-CONFIG_B44=y
+# CONFIG_B44 is not set
 CONFIG_FORCEDETH=y
 # CONFIG_FORCEDETH_NAPI is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
-CONFIG_8139CP=y
+# CONFIG_8139CP is not set
 CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_PIO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -740,34 +948,74 @@ CONFIG_NETDEV_1000=y
 CONFIG_E1000=y
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
+CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-CONFIG_BNX2=y
+# CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
+# CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
-# CONFIG_TR is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+CONFIG_TR=y
+# CONFIG_IBMOL is not set
+# CONFIG_3C359 is not set
+# CONFIG_TMS380TR is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_ATH5K=y
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
 
 #
 # USB Network Adapters
@@ -776,16 +1024,26 @@ CONFIG_S2IO=m
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
-# CONFIG_FDDI is not set
+CONFIG_FDDI=y
+# CONFIG_DEFXX is not set
+# CONFIG_SKFP is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 # CONFIG_NETPOLL_TRAP is not set
 CONFIG_NET_POLL_CONTROLLER=y
@@ -796,18 +1054,17 @@ CONFIG_NET_POLL_CONTROLLER=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
 
 #
 # Userland interfaces
 #
 CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -832,17 +1089,62 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_JOYSTICK_XPAD is not set
+CONFIG_INPUT_TABLET=y
+# CONFIG_TABLET_USB_ACECAD is not set
+# CONFIG_TABLET_USB_AIPTEK is not set
+# CONFIG_TABLET_USB_GTCO is not set
+# CONFIG_TABLET_USB_KBTAB is not set
+# CONFIG_TABLET_USB_WACOM is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
 CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
@@ -855,8 +1157,26 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -866,9 +1186,14 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_FIX_EARLYCON_MEM=y
 CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=32
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
 
 #
 # Non-8250 serial port support
@@ -877,78 +1202,260 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_INTEL=y
-CONFIG_HW_RANDOM_AMD=y
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-CONFIG_AGP=y
-CONFIG_AGP_AMD64=y
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_VIA is not set
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_MWAVE is not set
 # CONFIG_PC8736x_GPIO is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
+# CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
-CONFIG_HPET_MMAP=y
+# CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_TELCLOCK is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+CONFIG_I2C_I801=y
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_ITCO_WDT is not set
+# CONFIG_IT8712F_WDT is not set
+# CONFIG_HP_WATCHDOG is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_AGP=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+# CONFIG_AGP_SIS is not set
+# CONFIG_AGP_VIA is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_I810 is not set
+# CONFIG_DRM_I830 is not set
+CONFIG_DRM_I915=y
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_VESA is not set
+CONFIG_FB_EFI=y
+# CONFIG_FB_IMAC is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+# CONFIG_BACKLIGHT_PROGEAR is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
 CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
@@ -958,33 +1465,165 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_PCSP is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
 
 #
 # Open Sound System
 #
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID_DEBUG=y
+CONFIG_HIDRAW=y
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_PANTHERLORD_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
 # Miscellaneous USB options
@@ -992,18 +1631,18 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
+CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1036,8 +1675,10 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
@@ -1049,10 +1690,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1078,98 +1715,126 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 
 #
-# USB DSL modem support
+# LED drivers
 #
+# CONFIG_LEDS_CLEVO_MAIL is not set
 
 #
-# USB Gadget Support
+# LED Triggers
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
 
 #
-# LED devices
+# Reporting subsystems
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC_DEBUG is not set
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
 
 #
-# LED drivers
+# RTC interfaces
 #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# LED Triggers
+# I2C RTC drivers
 #
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
-# Real Time Clock
+# SPI RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
+# Platform RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Clients
+# on-CPU RTC drivers
 #
+CONFIG_DMADEVICES=y
 
 #
 # DMA Devices
 #
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_INTEL_IOATDMA is not set
 # CONFIG_UIO is not set
 
 #
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
+CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
+# CONFIG_ISCSI_IBFT_FIND is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT3_FS_SECURITY=y
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-# CONFIG_REISERFS_FS_SECURITY is not set
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1180,7 +1845,7 @@ CONFIG_GENERIC_ACL=y
 #
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
+CONFIG_ZISOFS=y
 # CONFIG_UDF_FS is not set
 
 #
@@ -1198,13 +1863,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1212,6 +1877,7 @@ CONFIG_RAMFS=y
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1219,33 +1885,15 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -1255,14 +1903,26 @@ CONFIG_SUNRPC=y
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
@@ -1297,40 +1957,33 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_9 is not set
 # CONFIG_NLS_ISO8859_13 is not set
 # CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Instrumentation Support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1344,28 +1997,162 @@ CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_RODATA is not set
-# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_SAMPLES is not set
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+# CONFIG_DIRECT_GBPAGES is not set
+# CONFIG_DEBUG_RODATA_TEST is not set
+CONFIG_DEBUG_NX_TEST=m
+CONFIG_X86_MPPARSE=y
+# CONFIG_IOMMU_DEBUG is not set
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+CONFIG_DEBUG_BOOT_PARAMS=y
+# CONFIG_CPA_DEBUG is not set
 
 #
 # Security options
 #
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_AES_X86_64 is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SALSA20_X86_64 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTIO_BALLOON is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 58cccb6483b0..a0e1dbe67dc1 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -441,12 +441,6 @@ beyond_if:
 	regs->r8 = regs->r9 = regs->r10 = regs->r11 =
 	regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
 	set_fs(USER_DS);
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
 	return 0;
 }
 
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index cb3856a18c85..20af4c79579a 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -36,6 +36,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+#define FIX_EFLAGS	(X86_EFLAGS_AC | X86_EFLAGS_OF | \
+			 X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
+			 X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
+			 X86_EFLAGS_CF)
+
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 
@@ -248,7 +253,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 	regs->ss |= 3;
 
 	err |= __get_user(tmpflags, &sc->flags);
-	regs->flags = (regs->flags & ~0x40DD5) | (tmpflags & 0x40DD5);
+	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
 	/* disable syscall checks */
 	regs->orig_ax = -1;
 
@@ -515,7 +520,6 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			compat_sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
-	struct exec_domain *ed = current_thread_info()->exec_domain;
 	void __user *restorer;
 	int err = 0;
 
@@ -538,8 +542,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
 
-	err |= __put_user((ed && ed->signal_invmap && sig < 32
-			   ? ed->signal_invmap[sig] : sig), &frame->sig);
+	err |= __put_user(sig, &frame->sig);
 	err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
 	err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
 	err |= copy_siginfo_to_user32(&frame->info, info);
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index b5e329da166c..ffc1bb4fed7d 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -15,6 +15,16 @@
 #include <asm/irqflags.h>
 #include <linux/linkage.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE	   0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysexit_audit int_ret_from_sys_call
+#define sysretl_audit int_ret_from_sys_call
+#endif
+
 #define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8)
 
 	.macro IA32_ARG_FIXUP noebp=0
@@ -37,6 +47,11 @@
 	movq	%rax,R8(%rsp)
 	.endm
 
+	/*
+	 * Reload arg registers from stack in case ptrace changed them.
+	 * We don't reload %eax because syscall_trace_enter() returned
+	 * the value it wants us to use in the table lookup.
+	 */
 	.macro LOAD_ARGS32 offset
 	movl \offset(%rsp),%r11d
 	movl \offset+8(%rsp),%r10d
@@ -46,7 +61,6 @@
 	movl \offset+48(%rsp),%edx
 	movl \offset+56(%rsp),%esi
 	movl \offset+64(%rsp),%edi
-	movl \offset+72(%rsp),%eax
 	.endm
 	
 	.macro CFI_STARTPROC32 simple
@@ -61,6 +75,19 @@
 	CFI_UNDEFINED	r15
 	.endm
 
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_usergs_sysret32)
+	swapgs
+	sysretl
+ENDPROC(native_usergs_sysret32)
+
+ENTRY(native_irq_enable_sysexit)
+	swapgs
+	sti
+	sysexit
+ENDPROC(native_irq_enable_sysexit)
+#endif
+
 /*
  * 32bit SYSENTER instruction entry.
  *
@@ -85,14 +112,14 @@ ENTRY(ia32_sysenter_target)
 	CFI_SIGNAL_FRAME
 	CFI_DEF_CFA	rsp,0
 	CFI_REGISTER	rsp,rbp
-	swapgs
+	SWAPGS_UNSAFE_STACK
 	movq	%gs:pda_kernelstack, %rsp
 	addq	$(PDA_STACKOFFSET),%rsp	
 	/*
 	 * No need to follow this irqs on/off section: the syscall
 	 * disabled irqs, here we enable it straight after entry:
 	 */
-	sti	
+	ENABLE_INTERRUPTS(CLBR_NONE)
  	movl	%ebp,%ebp		/* zero extension */
 	pushq	$__USER32_DS
 	CFI_ADJUST_CFA_OFFSET 8
@@ -103,7 +130,7 @@ ENTRY(ia32_sysenter_target)
 	pushfq
 	CFI_ADJUST_CFA_OFFSET 8
 	/*CFI_REL_OFFSET rflags,0*/
-	movl	8*3-THREAD_SIZE+threadinfo_sysenter_return(%rsp), %r10d
+	movl	8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d
 	CFI_REGISTER rip,r10
 	pushq	$__USER32_CS
 	CFI_ADJUST_CFA_OFFSET 8
@@ -123,22 +150,24 @@ ENTRY(ia32_sysenter_target)
  	.quad 1b,ia32_badarg
  	.previous	
 	GET_THREAD_INFO(%r10)
-	orl    $TS_COMPAT,threadinfo_status(%r10)
-	testl  $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+	orl    $TS_COMPAT,TI_status(%r10)
+	testl  $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	CFI_REMEMBER_STATE
 	jnz  sysenter_tracesys
-sysenter_do_call:	
 	cmpl	$(IA32_NR_syscalls-1),%eax
 	ja	ia32_badsys
+sysenter_do_call:
 	IA32_ARG_FIXUP 1
+sysenter_dispatch:
 	call	*ia32_sys_call_table(,%rax,8)
 	movq	%rax,RAX-ARGOFFSET(%rsp)
 	GET_THREAD_INFO(%r10)
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	testl	$_TIF_ALLWORK_MASK,threadinfo_flags(%r10)
-	jnz	int_ret_from_sys_call
-	andl    $~TS_COMPAT,threadinfo_status(%r10)
+	testl	$_TIF_ALLWORK_MASK,TI_flags(%r10)
+	jnz	sysexit_audit
+sysexit_from_sys_call:
+	andl    $~TS_COMPAT,TI_status(%r10)
 	/* clear IF, that popfq doesn't enable interrupts early */
 	andl  $~0x200,EFLAGS-R11(%rsp) 
 	movl	RIP-R11(%rsp),%edx		/* User %eip */
@@ -151,14 +180,65 @@ sysenter_do_call:
 	CFI_ADJUST_CFA_OFFSET -8
 	CFI_REGISTER rsp,rcx
 	TRACE_IRQS_ON
-	swapgs
-	sti		/* sti only takes effect after the next instruction */
-	/* sysexit */
-	.byte	0xf, 0x35
+	ENABLE_INTERRUPTS_SYSEXIT32
 
-sysenter_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	.macro auditsys_entry_common
+	movl %esi,%r9d			/* 6th arg: 4th syscall arg */
+	movl %edx,%r8d			/* 5th arg: 3rd syscall arg */
+	/* (already in %ecx)		   4th arg: 2nd syscall arg */
+	movl %ebx,%edx			/* 3rd arg: 1st syscall arg */
+	movl %eax,%esi			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_I386,%edi	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall number */
+	cmpl $(IA32_NR_syscalls-1),%eax
+	ja ia32_badsys
+	movl %ebx,%edi			/* reload 1st syscall arg */
+	movl RCX-ARGOFFSET(%rsp),%esi	/* reload 2nd syscall arg */
+	movl RDX-ARGOFFSET(%rsp),%edx	/* reload 3rd syscall arg */
+	movl RSI-ARGOFFSET(%rsp),%ecx	/* reload 4th syscall arg */
+	movl RDI-ARGOFFSET(%rsp),%r8d	/* reload 5th syscall arg */
+	.endm
+
+	.macro auditsys_exit exit,ebpsave=RBP
+	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jnz int_ret_from_sys_call
+	TRACE_IRQS_ON
+	sti
+	movl %eax,%esi		/* second arg, syscall return value */
+	cmpl $0,%eax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%edi		/* zero-extend that into %edi */
+	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	GET_THREAD_INFO(%r10)
+	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall return value */
+	movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */
+	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+	cli
+	TRACE_IRQS_OFF
+	testl %edi,TI_flags(%r10)
+	jnz int_with_check
+	jmp \exit
+	.endm
+
+sysenter_auditsys:
 	CFI_RESTORE_STATE
+	auditsys_entry_common
+	movl %ebp,%r9d			/* reload 6th syscall arg */
+	jmp sysenter_dispatch
+
+sysexit_audit:
+	auditsys_exit sysexit_from_sys_call
+#endif
+
+sysenter_tracesys:
 	xchgl	%r9d,%ebp
+#ifdef CONFIG_AUDITSYSCALL
+	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jz	sysenter_auditsys
+#endif
 	SAVE_REST
 	CLEAR_RREGS
 	movq	%r9,R9(%rsp)
@@ -200,7 +280,7 @@ ENTRY(ia32_cstar_target)
 	CFI_DEF_CFA	rsp,PDA_STACKOFFSET
 	CFI_REGISTER	rip,rcx
 	/*CFI_REGISTER	rflags,r11*/
-	swapgs
+	SWAPGS_UNSAFE_STACK
 	movl	%esp,%r8d
 	CFI_REGISTER	rsp,r8
 	movq	%gs:pda_kernelstack,%rsp
@@ -208,7 +288,7 @@ ENTRY(ia32_cstar_target)
 	 * No need to follow this irqs on/off section: the syscall
 	 * disabled irqs and here we enable it straight after entry:
 	 */
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_ARGS 8,1,1
 	movl 	%eax,%eax	/* zero extension */
 	movq	%rax,ORIG_RAX-ARGOFFSET(%rsp)
@@ -230,22 +310,24 @@ ENTRY(ia32_cstar_target)
 	.quad 1b,ia32_badarg
 	.previous	
 	GET_THREAD_INFO(%r10)
-	orl   $TS_COMPAT,threadinfo_status(%r10)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+	orl   $TS_COMPAT,TI_status(%r10)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	CFI_REMEMBER_STATE
 	jnz   cstar_tracesys
 cstar_do_call:	
 	cmpl $IA32_NR_syscalls-1,%eax
 	ja  ia32_badsys
 	IA32_ARG_FIXUP 1
+cstar_dispatch:
 	call *ia32_sys_call_table(,%rax,8)
 	movq %rax,RAX-ARGOFFSET(%rsp)
 	GET_THREAD_INFO(%r10)
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	testl $_TIF_ALLWORK_MASK,threadinfo_flags(%r10)
-	jnz  int_ret_from_sys_call
-	andl $~TS_COMPAT,threadinfo_status(%r10)
+	testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
+	jnz sysretl_audit
+sysretl_from_sys_call:
+	andl $~TS_COMPAT,TI_status(%r10)
 	RESTORE_ARGS 1,-ARG_SKIP,1,1,1
 	movl RIP-ARGOFFSET(%rsp),%ecx
 	CFI_REGISTER rip,rcx
@@ -254,11 +336,25 @@ cstar_do_call:
 	TRACE_IRQS_ON
 	movl RSP-ARGOFFSET(%rsp),%esp
 	CFI_RESTORE rsp
-	swapgs
-	sysretl
+	USERGS_SYSRET32
 	
-cstar_tracesys:	
+#ifdef CONFIG_AUDITSYSCALL
+cstar_auditsys:
 	CFI_RESTORE_STATE
+	movl %r9d,R9-ARGOFFSET(%rsp)	/* register to be clobbered by call */
+	auditsys_entry_common
+	movl R9-ARGOFFSET(%rsp),%r9d	/* reload 6th syscall arg */
+	jmp cstar_dispatch
+
+sysretl_audit:
+	auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */
+#endif
+
+cstar_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jz cstar_auditsys
+#endif
 	xchgl %r9d,%ebp
 	SAVE_REST
 	CLEAR_RREGS
@@ -310,12 +406,13 @@ ENTRY(ia32_syscall)
 	/*CFI_REL_OFFSET	rflags,EFLAGS-RIP*/
 	/*CFI_REL_OFFSET	cs,CS-RIP*/
 	CFI_REL_OFFSET	rip,RIP-RIP
-	swapgs
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	SWAPGS
 	/*
 	 * No need to follow this irqs on/off section: the syscall
 	 * disabled irqs and here we enable it straight after entry:
 	 */
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	movl %eax,%eax
 	pushq %rax
 	CFI_ADJUST_CFA_OFFSET 8
@@ -324,8 +421,8 @@ ENTRY(ia32_syscall)
 	   this could be a problem. */
 	SAVE_ARGS 0,0,1
 	GET_THREAD_INFO(%r10)
-	orl   $TS_COMPAT,threadinfo_status(%r10)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+	orl   $TS_COMPAT,TI_status(%r10)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	jnz ia32_tracesys
 ia32_do_syscall:	
 	cmpl $(IA32_NR_syscalls-1),%eax
@@ -370,13 +467,11 @@ quiet_ni_syscall:
 	PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi
 	PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi
 	PTREGSCALL stub32_sigaltstack, sys32_sigaltstack, %rdx
-	PTREGSCALL stub32_sigsuspend, sys32_sigsuspend, %rcx
 	PTREGSCALL stub32_execve, sys32_execve, %rcx
 	PTREGSCALL stub32_fork, sys_fork, %rdi
 	PTREGSCALL stub32_clone, sys32_clone, %rdx
 	PTREGSCALL stub32_vfork, sys_vfork, %rdi
 	PTREGSCALL stub32_iopl, sys_iopl, %rsi
-	PTREGSCALL stub32_rt_sigsuspend, sys_rt_sigsuspend, %rdx
 
 ENTRY(ia32_ptregs_common)
 	popq %r11
@@ -476,7 +571,7 @@ ia32_sys_call_table:
 	.quad sys_ssetmask
 	.quad sys_setreuid16	/* 70 */
 	.quad sys_setregid16
-	.quad stub32_sigsuspend
+	.quad sys32_sigsuspend
 	.quad compat_sys_sigpending
 	.quad sys_sethostname
 	.quad compat_sys_setrlimit	/* 75 */
@@ -583,7 +678,7 @@ ia32_sys_call_table:
 	.quad sys32_rt_sigpending
 	.quad compat_sys_rt_sigtimedwait
 	.quad sys32_rt_sigqueueinfo
-	.quad stub32_rt_sigsuspend
+	.quad sys_rt_sigsuspend
 	.quad sys32_pread		/* 180 */
 	.quad sys32_pwrite
 	.quad sys_chown16
@@ -731,4 +826,10 @@ ia32_sys_call_table:
 	.quad sys32_fallocate
 	.quad compat_sys_timerfd_settime	/* 325 */
 	.quad compat_sys_timerfd_gettime
+	.quad compat_sys_signalfd4
+	.quad sys_eventfd2
+	.quad sys_epoll_create1
+	.quad sys_dup3			/* 330 */
+	.quad sys_pipe2
+	.quad sys_inotify_init1
 ia32_syscall_end:
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index f00afdf61e67..d3c64088b981 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -238,7 +238,7 @@ asmlinkage long sys32_pipe(int __user *fd)
 	int retval;
 	int fds[2];
 
-	retval = do_pipe(fds);
+	retval = do_pipe_flags(fds, 0);
 	if (retval)
 		goto out;
 	if (copy_to_user(fd, fds, sizeof(fds)))
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 77807d4769c9..3db651fc8ec5 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -2,10 +2,17 @@
 # Makefile for the linux kernel.
 #
 
-extra-y                := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds
+extra-y                := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinux.lds
 
 CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 
+ifdef CONFIG_FTRACE
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_tsc.o = -pg
+CFLAGS_REMOVE_rtc.o = -pg
+CFLAGS_REMOVE_paravirt.o = -pg
+endif
+
 #
 # vsyscalls (which work on the user stack) should have
 # no stack-protector checks:
@@ -13,20 +20,21 @@ CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_vsyscall_64.o	:= $(PROFILING) -g0 $(nostackp)
 CFLAGS_hpet.o		:= $(nostackp)
-CFLAGS_tsc_64.o		:= $(nostackp)
+CFLAGS_tsc.o		:= $(nostackp)
 
 obj-y			:= process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
 obj-y			+= traps_$(BITS).o irq_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o
-obj-y			+= setup_$(BITS).o i8259_$(BITS).o setup.o
+obj-y			+= setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
+obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
+obj-$(CONFIG_X86_32)	+= probe_roms_32.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
-obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o setup64.o
-obj-y			+= bootflag.o e820_$(BITS).o
+obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
+obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
 obj-y			+= alternative.o i8253.o pci-nommu.o
-obj-$(CONFIG_X86_64)	+= bugs_64.o
-obj-y			+= tsc_$(BITS).o io_delay.o rtc.o
+obj-y			+= tsc.o io_delay.o rtc.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o
@@ -53,9 +61,10 @@ obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi_$(BITS).o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic_$(BITS).o
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
@@ -64,7 +73,6 @@ obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
 obj-y				+= vsmp_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_MODULES)		+= module_$(BITS).o
-obj-$(CONFIG_ACPI_SRAT) 	+= srat_32.o
 obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
 obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
@@ -94,12 +102,14 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
-        obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o
+        obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
+	obj-y				+= bios_uv.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
         obj-$(CONFIG_GART_IOMMU)	+= pci-gart_64.o aperture_64.o
         obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary_64.o tce_64.o
+        obj-$(CONFIG_AMD_IOMMU)		+= amd_iommu_init.o amd_iommu.o
         obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb_64.o
 
         obj-$(CONFIG_PCI_MMCONFIG)	+= mmconf-fam10h_64.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 33c5216fd3e1..fa88a1d71290 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -37,6 +37,7 @@
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/io.h>
 #include <asm/mpspec.h>
 #include <asm/smp.h>
@@ -106,21 +107,6 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
  */
 enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
 
-#ifdef	CONFIG_X86_64
-
-/* rely on all ACPI tables being in the direct mapping */
-char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
-{
-	if (!phys_addr || !size)
-		return NULL;
-
-	if (phys_addr+size <= (max_pfn_mapped << PAGE_SHIFT) + PAGE_SIZE)
-		return __va(phys_addr);
-
-	return NULL;
-}
-
-#else
 
 /*
  * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
@@ -139,11 +125,15 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 	unsigned long base, offset, mapped_size;
 	int idx;
 
-	if (phys + size < 8 * 1024 * 1024)
+	if (!phys || !size)
+		return NULL;
+
+	if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT))
 		return __va(phys);
 
 	offset = phys & (PAGE_SIZE - 1);
 	mapped_size = PAGE_SIZE - offset;
+	clear_fixmap(FIX_ACPI_END);
 	set_fixmap(FIX_ACPI_END, phys);
 	base = fix_to_virt(FIX_ACPI_END);
 
@@ -155,13 +145,13 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 		if (--idx < FIX_ACPI_BEGIN)
 			return NULL;	/* cannot handle this */
 		phys += PAGE_SIZE;
+		clear_fixmap(idx);
 		set_fixmap(idx, phys);
 		mapped_size += PAGE_SIZE;
 	}
 
 	return ((unsigned char *)base + offset);
 }
-#endif
 
 #ifdef CONFIG_PCI_MMCONFIG
 /* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
@@ -338,8 +328,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e
 
 #ifdef CONFIG_X86_IO_APIC
 
-struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
-
 static int __init
 acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
 {
@@ -514,8 +502,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
 	 */
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
-		extern void eisa_set_level_irq(unsigned int irq);
-
 		if (triggering == ACPI_LEVEL_SENSITIVE)
 			eisa_set_level_irq(gsi);
 	}
@@ -860,6 +846,364 @@ static int __init acpi_parse_madt_lapic_entries(void)
 #endif				/* CONFIG_X86_LOCAL_APIC */
 
 #ifdef	CONFIG_X86_IO_APIC
+#define MP_ISA_BUS		0
+
+#ifdef CONFIG_X86_ES7000
+extern int es7000_plat;
+#endif
+
+static struct {
+	int apic_id;
+	int gsi_base;
+	int gsi_end;
+	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+static int mp_find_ioapic(int gsi)
+{
+	int i = 0;
+
+	/* Find the IOAPIC that manages this GSI. */
+	for (i = 0; i < nr_ioapics; i++) {
+		if ((gsi >= mp_ioapic_routing[i].gsi_base)
+		    && (gsi <= mp_ioapic_routing[i].gsi_end))
+			return i;
+	}
+
+	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+	return -1;
+}
+
+static u8 __init uniq_ioapic_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return io_apic_get_unique_id(nr_ioapics, id);
+	else
+		return id;
+#else
+	int i;
+	DECLARE_BITMAP(used, 256);
+	bitmap_zero(used, 256);
+	for (i = 0; i < nr_ioapics; i++) {
+		struct mp_config_ioapic *ia = &mp_ioapics[i];
+		__set_bit(ia->mp_apicid, used);
+	}
+	if (!test_bit(id, used))
+		return id;
+	return find_first_zero_bit(used, 256);
+#endif
+}
+
+static int bad_ioapic(unsigned long address)
+{
+	if (nr_ioapics >= MAX_IO_APICS) {
+		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+	}
+	if (!address) {
+		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+		       " found in table, skipping!\n");
+		return 1;
+	}
+	return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+	int idx = 0;
+
+	if (bad_ioapic(address))
+		return;
+
+	idx = nr_ioapics;
+
+	mp_ioapics[idx].mp_type = MP_IOAPIC;
+	mp_ioapics[idx].mp_flags = MPC_APIC_USABLE;
+	mp_ioapics[idx].mp_apicaddr = address;
+
+	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+	mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id);
+#ifdef CONFIG_X86_32
+	mp_ioapics[idx].mp_apicver = io_apic_get_version(idx);
+#else
+	mp_ioapics[idx].mp_apicver = 0;
+#endif
+	/*
+	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+	 */
+	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid;
+	mp_ioapic_routing[idx].gsi_base = gsi_base;
+	mp_ioapic_routing[idx].gsi_end = gsi_base +
+	    io_apic_get_redir_entries(idx);
+
+	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
+	       "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid,
+	       mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr,
+	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
+
+	nr_ioapics++;
+}
+
+static void assign_to_mp_irq(struct mp_config_intsrc *m,
+				    struct mp_config_intsrc *mp_irq)
+{
+	memcpy(mp_irq, m, sizeof(struct mp_config_intsrc));
+}
+
+static int mp_irq_cmp(struct mp_config_intsrc *mp_irq,
+				struct mp_config_intsrc *m)
+{
+	return memcmp(mp_irq, m, sizeof(struct mp_config_intsrc));
+}
+
+static void save_mp_irq(struct mp_config_intsrc *m)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (!mp_irq_cmp(&mp_irqs[i], m))
+			return;
+	}
+
+	assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!!\n");
+}
+
+void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+{
+	int ioapic;
+	int pin;
+	struct mp_config_intsrc mp_irq;
+
+	/*
+	 * Convert 'gsi' to 'ioapic.pin'.
+	 */
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0)
+		return;
+	pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+	/*
+	 * TBD: This check is for faulty timer entries, where the override
+	 *      erroneously sets the trigger to level, resulting in a HUGE
+	 *      increase of timer interrupts!
+	 */
+	if ((bus_irq == 0) && (trigger == 3))
+		trigger = 1;
+
+	mp_irq.mp_type = MP_INTSRC;
+	mp_irq.mp_irqtype = mp_INT;
+	mp_irq.mp_irqflag = (trigger << 2) | polarity;
+	mp_irq.mp_srcbus = MP_ISA_BUS;
+	mp_irq.mp_srcbusirq = bus_irq;	/* IRQ */
+	mp_irq.mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */
+	mp_irq.mp_dstirq = pin;	/* INTIN# */
+
+	save_mp_irq(&mp_irq);
+}
+
+void __init mp_config_acpi_legacy_irqs(void)
+{
+	int i;
+	int ioapic;
+	unsigned int dstapic;
+	struct mp_config_intsrc mp_irq;
+
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+	/*
+	 * Fabricate the legacy ISA bus (bus #31).
+	 */
+	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+#endif
+	set_bit(MP_ISA_BUS, mp_bus_not_pci);
+	pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
+
+#ifdef CONFIG_X86_ES7000
+	/*
+	 * Older generations of ES7000 have no legacy identity mappings
+	 */
+	if (es7000_plat == 1)
+		return;
+#endif
+
+	/*
+	 * Locate the IOAPIC that manages the ISA IRQs (0-15).
+	 */
+	ioapic = mp_find_ioapic(0);
+	if (ioapic < 0)
+		return;
+	dstapic = mp_ioapics[ioapic].mp_apicid;
+
+	/*
+	 * Use the default configuration for the IRQs 0-15.  Unless
+	 * overridden by (MADT) interrupt source override entries.
+	 */
+	for (i = 0; i < 16; i++) {
+		int idx;
+
+		for (idx = 0; idx < mp_irq_entries; idx++) {
+			struct mp_config_intsrc *irq = mp_irqs + idx;
+
+			/* Do we already have a mapping for this ISA IRQ? */
+			if (irq->mp_srcbus == MP_ISA_BUS
+			    && irq->mp_srcbusirq == i)
+				break;
+
+			/* Do we already have a mapping for this IOAPIC pin */
+			if (irq->mp_dstapic == dstapic &&
+			    irq->mp_dstirq == i)
+				break;
+		}
+
+		if (idx != mp_irq_entries) {
+			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+			continue;	/* IRQ already used */
+		}
+
+		mp_irq.mp_type = MP_INTSRC;
+		mp_irq.mp_irqflag = 0;	/* Conforming */
+		mp_irq.mp_srcbus = MP_ISA_BUS;
+		mp_irq.mp_dstapic = dstapic;
+		mp_irq.mp_irqtype = mp_INT;
+		mp_irq.mp_srcbusirq = i; /* Identity mapped */
+		mp_irq.mp_dstirq = i;
+
+		save_mp_irq(&mp_irq);
+	}
+}
+
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
+{
+	int ioapic;
+	int ioapic_pin;
+#ifdef CONFIG_X86_32
+#define MAX_GSI_NUM	4096
+#define IRQ_COMPRESSION_START	64
+
+	static int pci_irq = IRQ_COMPRESSION_START;
+	/*
+	 * Mapping between Global System Interrupts, which
+	 * represent all possible interrupts, and IRQs
+	 * assigned to actual devices.
+	 */
+	static int gsi_to_irq[MAX_GSI_NUM];
+#else
+
+	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+		return gsi;
+#endif
+
+	/* Don't set up the ACPI SCI because it's already set up */
+	if (acpi_gbl_FADT.sci_interrupt == gsi)
+		return gsi;
+
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0) {
+		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+		return gsi;
+	}
+
+	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+#ifdef CONFIG_X86_32
+	if (ioapic_renumber_irq)
+		gsi = ioapic_renumber_irq(ioapic, gsi);
+#endif
+
+	/*
+	 * Avoid pin reprogramming.  PRTs typically include entries
+	 * with redundant pin->gsi mappings (but unique PCI devices);
+	 * we only program the IOAPIC on the first.
+	 */
+	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
+		printk(KERN_ERR "Invalid reference to IOAPIC pin "
+		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+		       ioapic_pin);
+		return gsi;
+	}
+	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+		pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n",
+			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+#ifdef CONFIG_X86_32
+		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
+#else
+		return gsi;
+#endif
+	}
+
+	set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
+#ifdef CONFIG_X86_32
+	/*
+	 * For GSI >= 64, use IRQ compression
+	 */
+	if ((gsi >= IRQ_COMPRESSION_START)
+	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
+		/*
+		 * For PCI devices assign IRQs in order, avoiding gaps
+		 * due to unused I/O APIC pins.
+		 */
+		int irq = gsi;
+		if (gsi < MAX_GSI_NUM) {
+			/*
+			 * Retain the VIA chipset work-around (gsi > 15), but
+			 * avoid a problem where the 8254 timer (IRQ0) is setup
+			 * via an override (so it's not on pin 0 of the ioapic),
+			 * and at the same time, the pin 0 interrupt is a PCI
+			 * type.  The gsi > 15 test could cause these two pins
+			 * to be shared as IRQ0, and they are not shareable.
+			 * So test for this condition, and if necessary, avoid
+			 * the pin collision.
+			 */
+			gsi = pci_irq++;
+			/*
+			 * Don't assign IRQ used by ACPI SCI
+			 */
+			if (gsi == acpi_gbl_FADT.sci_interrupt)
+				gsi = pci_irq++;
+			gsi_to_irq[irq] = gsi;
+		} else {
+			printk(KERN_ERR "GSI %u is too high\n", gsi);
+			return gsi;
+		}
+	}
+#endif
+	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
+				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+	return gsi;
+}
+
+int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+			u32 gsi, int triggering, int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+	struct mp_config_intsrc mp_irq;
+	int ioapic;
+
+	if (!acpi_ioapic)
+		return 0;
+
+	/* print the entry should happen on mptable identically */
+	mp_irq.mp_type = MP_INTSRC;
+	mp_irq.mp_irqtype = mp_INT;
+	mp_irq.mp_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+	mp_irq.mp_srcbus = number;
+	mp_irq.mp_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+	ioapic = mp_find_ioapic(gsi);
+	mp_irq.mp_dstapic = mp_ioapic_routing[ioapic].apic_id;
+	mp_irq.mp_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+	save_mp_irq(&mp_irq);
+#endif
+	return 0;
+}
+
 /*
  * Parse IOAPIC related entries in MADT
  * returns 0 on success, < 0 on error
@@ -1009,8 +1353,6 @@ static void __init acpi_process_madt(void)
 	return;
 }
 
-#ifdef __i386__
-
 static int __init disable_acpi_irq(const struct dmi_system_id *d)
 {
 	if (!acpi_force) {
@@ -1061,6 +1403,16 @@ static int __init force_acpi_ht(const struct dmi_system_id *d)
 }
 
 /*
+ * Force ignoring BIOS IRQ0 pin2 override
+ */
+static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
+{
+	pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", d->ident);
+	acpi_skip_timer_override = 1;
+	return 0;
+}
+
+/*
  * If your system is blacklisted here, but you find that acpi=force
  * works for you, please contact acpi-devel@sourceforge.net
  */
@@ -1227,11 +1579,35 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
+	/*
+	 * HP laptops which use a DSDT reporting as HP/SB400/10000,
+	 * which includes some code which overrides all temperature
+	 * trip points to 16C if the INTIN2 input of the I/O APIC
+	 * is enabled.  This input is incorrectly designated the
+	 * ISA IRQ 0 via an interrupt source override even though
+	 * it is wired to the output of the master 8259A and INTIN0
+	 * is not connected at all.  Force ignoring BIOS IRQ0 pin2
+	 * override in that cases.
+	 */
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP NX6125 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP NX6325 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+		     },
+	 },
 	{}
 };
 
-#endif				/* __i386__ */
-
 /*
  * acpi_boot_table_init() and acpi_boot_init()
  *  called from setup_arch(), always.
@@ -1259,9 +1635,7 @@ int __init acpi_boot_table_init(void)
 {
 	int error;
 
-#ifdef __i386__
 	dmi_check_system(acpi_dmi_table);
-#endif
 
 	/*
 	 * If acpi_disabled, bail out
@@ -1386,6 +1760,20 @@ static int __init parse_pci(char *arg)
 }
 early_param("pci", parse_pci);
 
+int __init acpi_mps_check(void)
+{
+#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE)
+/* mptable code is not built-in*/
+	if (acpi_disabled || acpi_noirq) {
+		printk(KERN_WARNING "MPS support code is not built-in.\n"
+		       "Using acpi=off or acpi=noirq or pci=noacpi "
+		       "may have problem\n");
+		return 1;
+	}
+#endif
+	return 0;
+}
+
 #ifdef CONFIG_X86_IO_APIC
 static int __init parse_acpi_skip_timer_override(char *arg)
 {
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index c2502eb9aa83..9220cf46aa10 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -73,6 +73,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
 	cpumask_t saved_mask;
+	cpumask_of_cpu_ptr(new_mask, cpu);
 	int retval;
 	unsigned int eax, ebx, ecx, edx;
 	unsigned int edx_part;
@@ -91,7 +92,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
 	/* Make sure we are running on right CPU */
 	saved_mask = current->cpus_allowed;
-	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	retval = set_cpus_allowed_ptr(current, new_mask);
 	if (retval)
 		return -1;
 
diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index de2d2e4ebad9..7c074eec39fb 100644
--- a/arch/x86/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
@@ -56,6 +56,12 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
 	if (cpu_has(c, X86_FEATURE_ACPI))
 		buf[2] |= ACPI_PDC_T_FFH;
 
+	/*
+	 * If mwait/monitor is unsupported, C2/C3_FFH will be disabled
+	 */
+	if (!cpu_has(c, X86_FEATURE_MWAIT))
+		buf[2] &= ~(ACPI_PDC_C_C2C3_FFH);
+
 	obj->type = ACPI_TYPE_BUFFER;
 	obj->buffer.length = 12;
 	obj->buffer.pointer = (u8 *) buf;
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 36af01f029ed..fa2161d5003b 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -9,6 +9,7 @@
 #include <linux/bootmem.h>
 #include <linux/dmi.h>
 #include <linux/cpumask.h>
+#include <asm/segment.h>
 
 #include "realmode/wakeup.h"
 #include "sleep.h"
@@ -51,18 +52,27 @@ int acpi_save_state_mem(void)
 	header->video_mode = saved_video_mode;
 
 	header->wakeup_jmp_seg = acpi_wakeup_address >> 4;
+
+	/*
+	 * Set up the wakeup GDT.  We set these up as Big Real Mode,
+	 * that is, with limits set to 4 GB.  At least the Lenovo
+	 * Thinkpad X61 is known to need this for the video BIOS
+	 * initialization quirk to work; this is likely to also
+	 * be the case for other laptops or integrated video devices.
+	 */
+
 	/* GDT[0]: GDT self-pointer */
 	header->wakeup_gdt[0] =
 		(u64)(sizeof(header->wakeup_gdt) - 1) +
 		((u64)(acpi_wakeup_address +
 			((char *)&header->wakeup_gdt - (char *)acpi_realmode))
 				<< 16);
-	/* GDT[1]: real-mode-like code segment */
-	header->wakeup_gdt[1] = (0x009bULL << 40) +
-		((u64)acpi_wakeup_address << 16) + 0xffff;
-	/* GDT[2]: real-mode-like data segment */
-	header->wakeup_gdt[2] = (0x0093ULL << 40) +
-		((u64)acpi_wakeup_address << 16) + 0xffff;
+	/* GDT[1]: big real mode-like code segment */
+	header->wakeup_gdt[1] =
+		GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff);
+	/* GDT[2]: big real mode-like data segment */
+	header->wakeup_gdt[2] =
+		GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff);
 
 #ifndef CONFIG_64BIT
 	store_gdt((struct desc_ptr *)&header->pmode_gdt);
@@ -86,7 +96,9 @@ int acpi_save_state_mem(void)
 	saved_magic = 0x12345678;
 #else /* CONFIG_64BIT */
 	header->trampoline_segment = setup_trampoline() >> 4;
-	init_rsp = (unsigned long)temp_stack + 4096;
+#ifdef CONFIG_SMP
+	stack_start.sp = temp_stack + 4096;
+#endif
 	initial_code = (unsigned long)wakeup_long64;
 	saved_magic = 0x123456789abcdef0;
 #endif /* CONFIG_64BIT */
@@ -138,6 +150,12 @@ static int __init acpi_sleep_setup(char *str)
 			acpi_realmode_flags |= 2;
 		if (strncmp(str, "s3_beep", 7) == 0)
 			acpi_realmode_flags |= 4;
+#ifdef CONFIG_HIBERNATION
+		if (strncmp(str, "s4_nohwsig", 10) == 0)
+			acpi_no_s4_hw_signature();
+#endif
+		if (strncmp(str, "old_ordering", 12) == 0)
+			acpi_old_suspend_ordering();
 		str = strchr(str, ',');
 		if (str != NULL)
 			str += strspn(str, ", \t");
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 65c7857a90dd..2763cb37b553 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -1,6 +1,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/kprobes.h>
 #include <linux/mm.h>
@@ -143,7 +143,7 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 #ifdef CONFIG_X86_64
 
 extern char __vsyscall_0;
-static inline const unsigned char*const * find_nop_table(void)
+const unsigned char *const *find_nop_table(void)
 {
 	return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
 	       boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
@@ -162,7 +162,7 @@ static const struct nop {
 	{ -1, NULL }
 };
 
-static const unsigned char*const * find_nop_table(void)
+const unsigned char *const *find_nop_table(void)
 {
 	const unsigned char *const *noptable = intel_nops;
 	int i;
@@ -279,7 +279,7 @@ struct smp_alt_module {
 	struct list_head next;
 };
 static LIST_HEAD(smp_alt_modules);
-static DEFINE_SPINLOCK(smp_alt);
+static DEFINE_MUTEX(smp_alt);
 static int smp_mode = 1;	/* protected by smp_alt */
 
 void alternatives_smp_module_add(struct module *mod, char *name,
@@ -312,12 +312,12 @@ void alternatives_smp_module_add(struct module *mod, char *name,
 		__func__, smp->locks, smp->locks_end,
 		smp->text, smp->text_end, smp->name);
 
-	spin_lock(&smp_alt);
+	mutex_lock(&smp_alt);
 	list_add_tail(&smp->next, &smp_alt_modules);
 	if (boot_cpu_has(X86_FEATURE_UP))
 		alternatives_smp_unlock(smp->locks, smp->locks_end,
 					smp->text, smp->text_end);
-	spin_unlock(&smp_alt);
+	mutex_unlock(&smp_alt);
 }
 
 void alternatives_smp_module_del(struct module *mod)
@@ -327,17 +327,17 @@ void alternatives_smp_module_del(struct module *mod)
 	if (smp_alt_once || noreplace_smp)
 		return;
 
-	spin_lock(&smp_alt);
+	mutex_lock(&smp_alt);
 	list_for_each_entry(item, &smp_alt_modules, next) {
 		if (mod != item->mod)
 			continue;
 		list_del(&item->next);
-		spin_unlock(&smp_alt);
+		mutex_unlock(&smp_alt);
 		DPRINTK("%s: %s\n", __func__, item->name);
 		kfree(item);
 		return;
 	}
-	spin_unlock(&smp_alt);
+	mutex_unlock(&smp_alt);
 }
 
 void alternatives_smp_switch(int smp)
@@ -359,7 +359,7 @@ void alternatives_smp_switch(int smp)
 		return;
 	BUG_ON(!smp && (num_online_cpus() > 1));
 
-	spin_lock(&smp_alt);
+	mutex_lock(&smp_alt);
 
 	/*
 	 * Avoid unnecessary switches because it forces JIT based VMs to
@@ -383,7 +383,7 @@ void alternatives_smp_switch(int smp)
 						mod->text, mod->text_end);
 	}
 	smp_mode = smp;
-	spin_unlock(&smp_alt);
+	mutex_unlock(&smp_alt);
 }
 
 #endif
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
new file mode 100644
index 000000000000..c25210e6ac88
--- /dev/null
+++ b/arch/x86/kernel/amd_iommu.c
@@ -0,0 +1,1167 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *         Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/pci.h>
+#include <linux/gfp.h>
+#include <linux/bitops.h>
+#include <linux/scatterlist.h>
+#include <linux/iommu-helper.h>
+#include <asm/proto.h>
+#include <asm/iommu.h>
+#include <asm/amd_iommu_types.h>
+#include <asm/amd_iommu.h>
+
+#define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
+
+#define to_pages(addr, size) \
+	 (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
+
+#define EXIT_LOOP_COUNT 10000000
+
+static DEFINE_RWLOCK(amd_iommu_devtable_lock);
+
+/*
+ * general struct to manage commands send to an IOMMU
+ */
+struct iommu_cmd {
+	u32 data[4];
+};
+
+static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
+			     struct unity_map_entry *e);
+
+/* returns !0 if the IOMMU is caching non-present entries in its TLB */
+static int iommu_has_npcache(struct amd_iommu *iommu)
+{
+	return iommu->cap & IOMMU_CAP_NPCACHE;
+}
+
+/****************************************************************************
+ *
+ * IOMMU command queuing functions
+ *
+ ****************************************************************************/
+
+/*
+ * Writes the command to the IOMMUs command buffer and informs the
+ * hardware about the new command. Must be called with iommu->lock held.
+ */
+static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
+{
+	u32 tail, head;
+	u8 *target;
+
+	tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+	target = (iommu->cmd_buf + tail);
+	memcpy_toio(target, cmd, sizeof(*cmd));
+	tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
+	head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+	if (tail == head)
+		return -ENOMEM;
+	writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
+	return 0;
+}
+
+/*
+ * General queuing function for commands. Takes iommu->lock and calls
+ * __iommu_queue_command().
+ */
+static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&iommu->lock, flags);
+	ret = __iommu_queue_command(iommu, cmd);
+	spin_unlock_irqrestore(&iommu->lock, flags);
+
+	return ret;
+}
+
+/*
+ * This function is called whenever we need to ensure that the IOMMU has
+ * completed execution of all commands we sent. It sends a
+ * COMPLETION_WAIT command and waits for it to finish. The IOMMU informs
+ * us about that by writing a value to a physical address we pass with
+ * the command.
+ */
+static int iommu_completion_wait(struct amd_iommu *iommu)
+{
+	int ret;
+	struct iommu_cmd cmd;
+	volatile u64 ready = 0;
+	unsigned long ready_phys = virt_to_phys(&ready);
+	unsigned long i = 0;
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK;
+	cmd.data[1] = upper_32_bits(ready_phys);
+	cmd.data[2] = 1; /* value written to 'ready' */
+	CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
+
+	iommu->need_sync = 0;
+
+	ret = iommu_queue_command(iommu, &cmd);
+
+	if (ret)
+		return ret;
+
+	while (!ready && (i < EXIT_LOOP_COUNT)) {
+		++i;
+		cpu_relax();
+	}
+
+	if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
+		printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+
+	return 0;
+}
+
+/*
+ * Command send function for invalidating a device table entry
+ */
+static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
+{
+	struct iommu_cmd cmd;
+
+	BUG_ON(iommu == NULL);
+
+	memset(&cmd, 0, sizeof(cmd));
+	CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
+	cmd.data[0] = devid;
+
+	iommu->need_sync = 1;
+
+	return iommu_queue_command(iommu, &cmd);
+}
+
+/*
+ * Generic command send function for invalidaing TLB entries
+ */
+static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
+		u64 address, u16 domid, int pde, int s)
+{
+	struct iommu_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	address &= PAGE_MASK;
+	CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES);
+	cmd.data[1] |= domid;
+	cmd.data[2] = LOW_U32(address);
+	cmd.data[3] = upper_32_bits(address);
+	if (s) /* size bit - we flush more than one 4kb page */
+		cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
+	if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
+		cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
+
+	iommu->need_sync = 1;
+
+	return iommu_queue_command(iommu, &cmd);
+}
+
+/*
+ * TLB invalidation function which is called from the mapping functions.
+ * It invalidates a single PTE if the range to flush is within a single
+ * page. Otherwise it flushes the whole TLB of the IOMMU.
+ */
+static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
+		u64 address, size_t size)
+{
+	int s = 0;
+	unsigned pages = to_pages(address, size);
+
+	address &= PAGE_MASK;
+
+	if (pages > 1) {
+		/*
+		 * If we have to flush more than one page, flush all
+		 * TLB entries for this domain
+		 */
+		address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
+		s = 1;
+	}
+
+	iommu_queue_inv_iommu_pages(iommu, address, domid, 0, s);
+
+	return 0;
+}
+
+/****************************************************************************
+ *
+ * The functions below are used the create the page table mappings for
+ * unity mapped regions.
+ *
+ ****************************************************************************/
+
+/*
+ * Generic mapping functions. It maps a physical address into a DMA
+ * address space. It allocates the page table pages if necessary.
+ * In the future it can be extended to a generic mapping function
+ * supporting all features of AMD IOMMU page tables like level skipping
+ * and full 64 bit address spaces.
+ */
+static int iommu_map(struct protection_domain *dom,
+		     unsigned long bus_addr,
+		     unsigned long phys_addr,
+		     int prot)
+{
+	u64 __pte, *pte, *page;
+
+	bus_addr  = PAGE_ALIGN(bus_addr);
+	phys_addr = PAGE_ALIGN(bus_addr);
+
+	/* only support 512GB address spaces for now */
+	if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
+		return -EINVAL;
+
+	pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(bus_addr)];
+
+	if (!IOMMU_PTE_PRESENT(*pte)) {
+		page = (u64 *)get_zeroed_page(GFP_KERNEL);
+		if (!page)
+			return -ENOMEM;
+		*pte = IOMMU_L2_PDE(virt_to_phys(page));
+	}
+
+	pte = IOMMU_PTE_PAGE(*pte);
+	pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
+
+	if (!IOMMU_PTE_PRESENT(*pte)) {
+		page = (u64 *)get_zeroed_page(GFP_KERNEL);
+		if (!page)
+			return -ENOMEM;
+		*pte = IOMMU_L1_PDE(virt_to_phys(page));
+	}
+
+	pte = IOMMU_PTE_PAGE(*pte);
+	pte = &pte[IOMMU_PTE_L0_INDEX(bus_addr)];
+
+	if (IOMMU_PTE_PRESENT(*pte))
+		return -EBUSY;
+
+	__pte = phys_addr | IOMMU_PTE_P;
+	if (prot & IOMMU_PROT_IR)
+		__pte |= IOMMU_PTE_IR;
+	if (prot & IOMMU_PROT_IW)
+		__pte |= IOMMU_PTE_IW;
+
+	*pte = __pte;
+
+	return 0;
+}
+
+/*
+ * This function checks if a specific unity mapping entry is needed for
+ * this specific IOMMU.
+ */
+static int iommu_for_unity_map(struct amd_iommu *iommu,
+			       struct unity_map_entry *entry)
+{
+	u16 bdf, i;
+
+	for (i = entry->devid_start; i <= entry->devid_end; ++i) {
+		bdf = amd_iommu_alias_table[i];
+		if (amd_iommu_rlookup_table[bdf] == iommu)
+			return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Init the unity mappings for a specific IOMMU in the system
+ *
+ * Basically iterates over all unity mapping entries and applies them to
+ * the default domain DMA of that IOMMU if necessary.
+ */
+static int iommu_init_unity_mappings(struct amd_iommu *iommu)
+{
+	struct unity_map_entry *entry;
+	int ret;
+
+	list_for_each_entry(entry, &amd_iommu_unity_map, list) {
+		if (!iommu_for_unity_map(iommu, entry))
+			continue;
+		ret = dma_ops_unity_map(iommu->default_dom, entry);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * This function actually applies the mapping to the page table of the
+ * dma_ops domain.
+ */
+static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
+			     struct unity_map_entry *e)
+{
+	u64 addr;
+	int ret;
+
+	for (addr = e->address_start; addr < e->address_end;
+	     addr += PAGE_SIZE) {
+		ret = iommu_map(&dma_dom->domain, addr, addr, e->prot);
+		if (ret)
+			return ret;
+		/*
+		 * if unity mapping is in aperture range mark the page
+		 * as allocated in the aperture
+		 */
+		if (addr < dma_dom->aperture_size)
+			__set_bit(addr >> PAGE_SHIFT, dma_dom->bitmap);
+	}
+
+	return 0;
+}
+
+/*
+ * Inits the unity mappings required for a specific device
+ */
+static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
+					  u16 devid)
+{
+	struct unity_map_entry *e;
+	int ret;
+
+	list_for_each_entry(e, &amd_iommu_unity_map, list) {
+		if (!(devid >= e->devid_start && devid <= e->devid_end))
+			continue;
+		ret = dma_ops_unity_map(dma_dom, e);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/****************************************************************************
+ *
+ * The next functions belong to the address allocator for the dma_ops
+ * interface functions. They work like the allocators in the other IOMMU
+ * drivers. Its basically a bitmap which marks the allocated pages in
+ * the aperture. Maybe it could be enhanced in the future to a more
+ * efficient allocator.
+ *
+ ****************************************************************************/
+static unsigned long dma_mask_to_pages(unsigned long mask)
+{
+	return (mask >> PAGE_SHIFT) +
+		(PAGE_ALIGN(mask & ~PAGE_MASK) >> PAGE_SHIFT);
+}
+
+/*
+ * The address allocator core function.
+ *
+ * called with domain->lock held
+ */
+static unsigned long dma_ops_alloc_addresses(struct device *dev,
+					     struct dma_ops_domain *dom,
+					     unsigned int pages)
+{
+	unsigned long limit = dma_mask_to_pages(*dev->dma_mask);
+	unsigned long address;
+	unsigned long size = dom->aperture_size >> PAGE_SHIFT;
+	unsigned long boundary_size;
+
+	boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+			PAGE_SIZE) >> PAGE_SHIFT;
+	limit = limit < size ? limit : size;
+
+	if (dom->next_bit >= limit)
+		dom->next_bit = 0;
+
+	address = iommu_area_alloc(dom->bitmap, limit, dom->next_bit, pages,
+			0 , boundary_size, 0);
+	if (address == -1)
+		address = iommu_area_alloc(dom->bitmap, limit, 0, pages,
+				0, boundary_size, 0);
+
+	if (likely(address != -1)) {
+		dom->next_bit = address + pages;
+		address <<= PAGE_SHIFT;
+	} else
+		address = bad_dma_address;
+
+	WARN_ON((address + (PAGE_SIZE*pages)) > dom->aperture_size);
+
+	return address;
+}
+
+/*
+ * The address free function.
+ *
+ * called with domain->lock held
+ */
+static void dma_ops_free_addresses(struct dma_ops_domain *dom,
+				   unsigned long address,
+				   unsigned int pages)
+{
+	address >>= PAGE_SHIFT;
+	iommu_area_free(dom->bitmap, address, pages);
+}
+
+/****************************************************************************
+ *
+ * The next functions belong to the domain allocation. A domain is
+ * allocated for every IOMMU as the default domain. If device isolation
+ * is enabled, every device get its own domain. The most important thing
+ * about domains is the page table mapping the DMA address space they
+ * contain.
+ *
+ ****************************************************************************/
+
+static u16 domain_id_alloc(void)
+{
+	unsigned long flags;
+	int id;
+
+	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
+	id = find_first_zero_bit(amd_iommu_pd_alloc_bitmap, MAX_DOMAIN_ID);
+	BUG_ON(id == 0);
+	if (id > 0 && id < MAX_DOMAIN_ID)
+		__set_bit(id, amd_iommu_pd_alloc_bitmap);
+	else
+		id = 0;
+	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	return id;
+}
+
+/*
+ * Used to reserve address ranges in the aperture (e.g. for exclusion
+ * ranges.
+ */
+static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
+				      unsigned long start_page,
+				      unsigned int pages)
+{
+	unsigned int last_page = dom->aperture_size >> PAGE_SHIFT;
+
+	if (start_page + pages > last_page)
+		pages = last_page - start_page;
+
+	set_bit_string(dom->bitmap, start_page, pages);
+}
+
+static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom)
+{
+	int i, j;
+	u64 *p1, *p2, *p3;
+
+	p1 = dma_dom->domain.pt_root;
+
+	if (!p1)
+		return;
+
+	for (i = 0; i < 512; ++i) {
+		if (!IOMMU_PTE_PRESENT(p1[i]))
+			continue;
+
+		p2 = IOMMU_PTE_PAGE(p1[i]);
+		for (j = 0; j < 512; ++i) {
+			if (!IOMMU_PTE_PRESENT(p2[j]))
+				continue;
+			p3 = IOMMU_PTE_PAGE(p2[j]);
+			free_page((unsigned long)p3);
+		}
+
+		free_page((unsigned long)p2);
+	}
+
+	free_page((unsigned long)p1);
+}
+
+/*
+ * Free a domain, only used if something went wrong in the
+ * allocation path and we need to free an already allocated page table
+ */
+static void dma_ops_domain_free(struct dma_ops_domain *dom)
+{
+	if (!dom)
+		return;
+
+	dma_ops_free_pagetable(dom);
+
+	kfree(dom->pte_pages);
+
+	kfree(dom->bitmap);
+
+	kfree(dom);
+}
+
+/*
+ * Allocates a new protection domain usable for the dma_ops functions.
+ * It also intializes the page table and the address allocator data
+ * structures required for the dma_ops interface
+ */
+static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
+						   unsigned order)
+{
+	struct dma_ops_domain *dma_dom;
+	unsigned i, num_pte_pages;
+	u64 *l2_pde;
+	u64 address;
+
+	/*
+	 * Currently the DMA aperture must be between 32 MB and 1GB in size
+	 */
+	if ((order < 25) || (order > 30))
+		return NULL;
+
+	dma_dom = kzalloc(sizeof(struct dma_ops_domain), GFP_KERNEL);
+	if (!dma_dom)
+		return NULL;
+
+	spin_lock_init(&dma_dom->domain.lock);
+
+	dma_dom->domain.id = domain_id_alloc();
+	if (dma_dom->domain.id == 0)
+		goto free_dma_dom;
+	dma_dom->domain.mode = PAGE_MODE_3_LEVEL;
+	dma_dom->domain.pt_root = (void *)get_zeroed_page(GFP_KERNEL);
+	dma_dom->domain.priv = dma_dom;
+	if (!dma_dom->domain.pt_root)
+		goto free_dma_dom;
+	dma_dom->aperture_size = (1ULL << order);
+	dma_dom->bitmap = kzalloc(dma_dom->aperture_size / (PAGE_SIZE * 8),
+				  GFP_KERNEL);
+	if (!dma_dom->bitmap)
+		goto free_dma_dom;
+	/*
+	 * mark the first page as allocated so we never return 0 as
+	 * a valid dma-address. So we can use 0 as error value
+	 */
+	dma_dom->bitmap[0] = 1;
+	dma_dom->next_bit = 0;
+
+	/* Intialize the exclusion range if necessary */
+	if (iommu->exclusion_start &&
+	    iommu->exclusion_start < dma_dom->aperture_size) {
+		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
+		int pages = to_pages(iommu->exclusion_start,
+				iommu->exclusion_length);
+		dma_ops_reserve_addresses(dma_dom, startpage, pages);
+	}
+
+	/*
+	 * At the last step, build the page tables so we don't need to
+	 * allocate page table pages in the dma_ops mapping/unmapping
+	 * path.
+	 */
+	num_pte_pages = dma_dom->aperture_size / (PAGE_SIZE * 512);
+	dma_dom->pte_pages = kzalloc(num_pte_pages * sizeof(void *),
+			GFP_KERNEL);
+	if (!dma_dom->pte_pages)
+		goto free_dma_dom;
+
+	l2_pde = (u64 *)get_zeroed_page(GFP_KERNEL);
+	if (l2_pde == NULL)
+		goto free_dma_dom;
+
+	dma_dom->domain.pt_root[0] = IOMMU_L2_PDE(virt_to_phys(l2_pde));
+
+	for (i = 0; i < num_pte_pages; ++i) {
+		dma_dom->pte_pages[i] = (u64 *)get_zeroed_page(GFP_KERNEL);
+		if (!dma_dom->pte_pages[i])
+			goto free_dma_dom;
+		address = virt_to_phys(dma_dom->pte_pages[i]);
+		l2_pde[i] = IOMMU_L1_PDE(address);
+	}
+
+	return dma_dom;
+
+free_dma_dom:
+	dma_ops_domain_free(dma_dom);
+
+	return NULL;
+}
+
+/*
+ * Find out the protection domain structure for a given PCI device. This
+ * will give us the pointer to the page table root for example.
+ */
+static struct protection_domain *domain_for_device(u16 devid)
+{
+	struct protection_domain *dom;
+	unsigned long flags;
+
+	read_lock_irqsave(&amd_iommu_devtable_lock, flags);
+	dom = amd_iommu_pd_table[devid];
+	read_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	return dom;
+}
+
+/*
+ * If a device is not yet associated with a domain, this function does
+ * assigns it visible for the hardware
+ */
+static void set_device_domain(struct amd_iommu *iommu,
+			      struct protection_domain *domain,
+			      u16 devid)
+{
+	unsigned long flags;
+
+	u64 pte_root = virt_to_phys(domain->pt_root);
+
+	pte_root |= (domain->mode & 0x07) << 9;
+	pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | 2;
+
+	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
+	amd_iommu_dev_table[devid].data[0] = pte_root;
+	amd_iommu_dev_table[devid].data[1] = pte_root >> 32;
+	amd_iommu_dev_table[devid].data[2] = domain->id;
+
+	amd_iommu_pd_table[devid] = domain;
+	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	iommu_queue_inv_dev_entry(iommu, devid);
+
+	iommu->need_sync = 1;
+}
+
+/*****************************************************************************
+ *
+ * The next functions belong to the dma_ops mapping/unmapping code.
+ *
+ *****************************************************************************/
+
+/*
+ * In the dma_ops path we only have the struct device. This function
+ * finds the corresponding IOMMU, the protection domain and the
+ * requestor id for a given device.
+ * If the device is not yet associated with a domain this is also done
+ * in this function.
+ */
+static int get_device_resources(struct device *dev,
+				struct amd_iommu **iommu,
+				struct protection_domain **domain,
+				u16 *bdf)
+{
+	struct dma_ops_domain *dma_dom;
+	struct pci_dev *pcidev;
+	u16 _bdf;
+
+	BUG_ON(!dev || dev->bus != &pci_bus_type || !dev->dma_mask);
+
+	pcidev = to_pci_dev(dev);
+	_bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
+
+	/* device not translated by any IOMMU in the system? */
+	if (_bdf >= amd_iommu_last_bdf) {
+		*iommu = NULL;
+		*domain = NULL;
+		*bdf = 0xffff;
+		return 0;
+	}
+
+	*bdf = amd_iommu_alias_table[_bdf];
+
+	*iommu = amd_iommu_rlookup_table[*bdf];
+	if (*iommu == NULL)
+		return 0;
+	dma_dom = (*iommu)->default_dom;
+	*domain = domain_for_device(*bdf);
+	if (*domain == NULL) {
+		*domain = &dma_dom->domain;
+		set_device_domain(*iommu, *domain, *bdf);
+		printk(KERN_INFO "AMD IOMMU: Using protection domain %d for "
+				"device ", (*domain)->id);
+		print_devid(_bdf, 1);
+	}
+
+	return 1;
+}
+
+/*
+ * This is the generic map function. It maps one 4kb page at paddr to
+ * the given address in the DMA address space for the domain.
+ */
+static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
+				     struct dma_ops_domain *dom,
+				     unsigned long address,
+				     phys_addr_t paddr,
+				     int direction)
+{
+	u64 *pte, __pte;
+
+	WARN_ON(address > dom->aperture_size);
+
+	paddr &= PAGE_MASK;
+
+	pte  = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
+	pte += IOMMU_PTE_L0_INDEX(address);
+
+	__pte = paddr | IOMMU_PTE_P | IOMMU_PTE_FC;
+
+	if (direction == DMA_TO_DEVICE)
+		__pte |= IOMMU_PTE_IR;
+	else if (direction == DMA_FROM_DEVICE)
+		__pte |= IOMMU_PTE_IW;
+	else if (direction == DMA_BIDIRECTIONAL)
+		__pte |= IOMMU_PTE_IR | IOMMU_PTE_IW;
+
+	WARN_ON(*pte);
+
+	*pte = __pte;
+
+	return (dma_addr_t)address;
+}
+
+/*
+ * The generic unmapping function for on page in the DMA address space.
+ */
+static void dma_ops_domain_unmap(struct amd_iommu *iommu,
+				 struct dma_ops_domain *dom,
+				 unsigned long address)
+{
+	u64 *pte;
+
+	if (address >= dom->aperture_size)
+		return;
+
+	WARN_ON(address & 0xfffULL || address > dom->aperture_size);
+
+	pte  = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
+	pte += IOMMU_PTE_L0_INDEX(address);
+
+	WARN_ON(!*pte);
+
+	*pte = 0ULL;
+}
+
+/*
+ * This function contains common code for mapping of a physically
+ * contiguous memory region into DMA address space. It is uses by all
+ * mapping functions provided by this IOMMU driver.
+ * Must be called with the domain lock held.
+ */
+static dma_addr_t __map_single(struct device *dev,
+			       struct amd_iommu *iommu,
+			       struct dma_ops_domain *dma_dom,
+			       phys_addr_t paddr,
+			       size_t size,
+			       int dir)
+{
+	dma_addr_t offset = paddr & ~PAGE_MASK;
+	dma_addr_t address, start;
+	unsigned int pages;
+	int i;
+
+	pages = to_pages(paddr, size);
+	paddr &= PAGE_MASK;
+
+	address = dma_ops_alloc_addresses(dev, dma_dom, pages);
+	if (unlikely(address == bad_dma_address))
+		goto out;
+
+	start = address;
+	for (i = 0; i < pages; ++i) {
+		dma_ops_domain_map(iommu, dma_dom, start, paddr, dir);
+		paddr += PAGE_SIZE;
+		start += PAGE_SIZE;
+	}
+	address += offset;
+
+out:
+	return address;
+}
+
+/*
+ * Does the reverse of the __map_single function. Must be called with
+ * the domain lock held too
+ */
+static void __unmap_single(struct amd_iommu *iommu,
+			   struct dma_ops_domain *dma_dom,
+			   dma_addr_t dma_addr,
+			   size_t size,
+			   int dir)
+{
+	dma_addr_t i, start;
+	unsigned int pages;
+
+	if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
+		return;
+
+	pages = to_pages(dma_addr, size);
+	dma_addr &= PAGE_MASK;
+	start = dma_addr;
+
+	for (i = 0; i < pages; ++i) {
+		dma_ops_domain_unmap(iommu, dma_dom, start);
+		start += PAGE_SIZE;
+	}
+
+	dma_ops_free_addresses(dma_dom, dma_addr, pages);
+}
+
+/*
+ * The exported map_single function for dma_ops.
+ */
+static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
+			     size_t size, int dir)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+	dma_addr_t addr;
+
+	get_device_resources(dev, &iommu, &domain, &devid);
+
+	if (iommu == NULL || domain == NULL)
+		/* device not handled by any AMD IOMMU */
+		return (dma_addr_t)paddr;
+
+	spin_lock_irqsave(&domain->lock, flags);
+	addr = __map_single(dev, iommu, domain->priv, paddr, size, dir);
+	if (addr == bad_dma_address)
+		goto out;
+
+	if (iommu_has_npcache(iommu))
+		iommu_flush_pages(iommu, domain->id, addr, size);
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+out:
+	spin_unlock_irqrestore(&domain->lock, flags);
+
+	return addr;
+}
+
+/*
+ * The exported unmap_single function for dma_ops.
+ */
+static void unmap_single(struct device *dev, dma_addr_t dma_addr,
+			 size_t size, int dir)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+
+	if (!get_device_resources(dev, &iommu, &domain, &devid))
+		/* device not handled by any AMD IOMMU */
+		return;
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	__unmap_single(iommu, domain->priv, dma_addr, size, dir);
+
+	iommu_flush_pages(iommu, domain->id, dma_addr, size);
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+	spin_unlock_irqrestore(&domain->lock, flags);
+}
+
+/*
+ * This is a special map_sg function which is used if we should map a
+ * device which is not handled by an AMD IOMMU in the system.
+ */
+static int map_sg_no_iommu(struct device *dev, struct scatterlist *sglist,
+			   int nelems, int dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sglist, s, nelems, i) {
+		s->dma_address = (dma_addr_t)sg_phys(s);
+		s->dma_length  = s->length;
+	}
+
+	return nelems;
+}
+
+/*
+ * The exported map_sg function for dma_ops (handles scatter-gather
+ * lists).
+ */
+static int map_sg(struct device *dev, struct scatterlist *sglist,
+		  int nelems, int dir)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+	int i;
+	struct scatterlist *s;
+	phys_addr_t paddr;
+	int mapped_elems = 0;
+
+	get_device_resources(dev, &iommu, &domain, &devid);
+
+	if (!iommu || !domain)
+		return map_sg_no_iommu(dev, sglist, nelems, dir);
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	for_each_sg(sglist, s, nelems, i) {
+		paddr = sg_phys(s);
+
+		s->dma_address = __map_single(dev, iommu, domain->priv,
+					      paddr, s->length, dir);
+
+		if (s->dma_address) {
+			s->dma_length = s->length;
+			mapped_elems++;
+		} else
+			goto unmap;
+		if (iommu_has_npcache(iommu))
+			iommu_flush_pages(iommu, domain->id, s->dma_address,
+					  s->dma_length);
+	}
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+out:
+	spin_unlock_irqrestore(&domain->lock, flags);
+
+	return mapped_elems;
+unmap:
+	for_each_sg(sglist, s, mapped_elems, i) {
+		if (s->dma_address)
+			__unmap_single(iommu, domain->priv, s->dma_address,
+				       s->dma_length, dir);
+		s->dma_address = s->dma_length = 0;
+	}
+
+	mapped_elems = 0;
+
+	goto out;
+}
+
+/*
+ * The exported map_sg function for dma_ops (handles scatter-gather
+ * lists).
+ */
+static void unmap_sg(struct device *dev, struct scatterlist *sglist,
+		     int nelems, int dir)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	struct scatterlist *s;
+	u16 devid;
+	int i;
+
+	if (!get_device_resources(dev, &iommu, &domain, &devid))
+		return;
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	for_each_sg(sglist, s, nelems, i) {
+		__unmap_single(iommu, domain->priv, s->dma_address,
+			       s->dma_length, dir);
+		iommu_flush_pages(iommu, domain->id, s->dma_address,
+				  s->dma_length);
+		s->dma_address = s->dma_length = 0;
+	}
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+	spin_unlock_irqrestore(&domain->lock, flags);
+}
+
+/*
+ * The exported alloc_coherent function for dma_ops.
+ */
+static void *alloc_coherent(struct device *dev, size_t size,
+			    dma_addr_t *dma_addr, gfp_t flag)
+{
+	unsigned long flags;
+	void *virt_addr;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+	phys_addr_t paddr;
+
+	virt_addr = (void *)__get_free_pages(flag, get_order(size));
+	if (!virt_addr)
+		return 0;
+
+	memset(virt_addr, 0, size);
+	paddr = virt_to_phys(virt_addr);
+
+	get_device_resources(dev, &iommu, &domain, &devid);
+
+	if (!iommu || !domain) {
+		*dma_addr = (dma_addr_t)paddr;
+		return virt_addr;
+	}
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	*dma_addr = __map_single(dev, iommu, domain->priv, paddr,
+				 size, DMA_BIDIRECTIONAL);
+
+	if (*dma_addr == bad_dma_address) {
+		free_pages((unsigned long)virt_addr, get_order(size));
+		virt_addr = NULL;
+		goto out;
+	}
+
+	if (iommu_has_npcache(iommu))
+		iommu_flush_pages(iommu, domain->id, *dma_addr, size);
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+out:
+	spin_unlock_irqrestore(&domain->lock, flags);
+
+	return virt_addr;
+}
+
+/*
+ * The exported free_coherent function for dma_ops.
+ * FIXME: fix the generic x86 DMA layer so that it actually calls that
+ *        function.
+ */
+static void free_coherent(struct device *dev, size_t size,
+			  void *virt_addr, dma_addr_t dma_addr)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+
+	get_device_resources(dev, &iommu, &domain, &devid);
+
+	if (!iommu || !domain)
+		goto free_mem;
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
+	iommu_flush_pages(iommu, domain->id, dma_addr, size);
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+	spin_unlock_irqrestore(&domain->lock, flags);
+
+free_mem:
+	free_pages((unsigned long)virt_addr, get_order(size));
+}
+
+/*
+ * The function for pre-allocating protection domains.
+ *
+ * If the driver core informs the DMA layer if a driver grabs a device
+ * we don't need to preallocate the protection domains anymore.
+ * For now we have to.
+ */
+void prealloc_protection_domains(void)
+{
+	struct pci_dev *dev = NULL;
+	struct dma_ops_domain *dma_dom;
+	struct amd_iommu *iommu;
+	int order = amd_iommu_aperture_order;
+	u16 devid;
+
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		devid = (dev->bus->number << 8) | dev->devfn;
+		if (devid >= amd_iommu_last_bdf)
+			continue;
+		devid = amd_iommu_alias_table[devid];
+		if (domain_for_device(devid))
+			continue;
+		iommu = amd_iommu_rlookup_table[devid];
+		if (!iommu)
+			continue;
+		dma_dom = dma_ops_domain_alloc(iommu, order);
+		if (!dma_dom)
+			continue;
+		init_unity_mappings_for_device(dma_dom, devid);
+		set_device_domain(iommu, &dma_dom->domain, devid);
+		printk(KERN_INFO "AMD IOMMU: Allocated domain %d for device ",
+		       dma_dom->domain.id);
+		print_devid(devid, 1);
+	}
+}
+
+static struct dma_mapping_ops amd_iommu_dma_ops = {
+	.alloc_coherent = alloc_coherent,
+	.free_coherent = free_coherent,
+	.map_single = map_single,
+	.unmap_single = unmap_single,
+	.map_sg = map_sg,
+	.unmap_sg = unmap_sg,
+};
+
+/*
+ * The function which clues the AMD IOMMU driver into dma_ops.
+ */
+int __init amd_iommu_init_dma_ops(void)
+{
+	struct amd_iommu *iommu;
+	int order = amd_iommu_aperture_order;
+	int ret;
+
+	/*
+	 * first allocate a default protection domain for every IOMMU we
+	 * found in the system. Devices not assigned to any other
+	 * protection domain will be assigned to the default one.
+	 */
+	list_for_each_entry(iommu, &amd_iommu_list, list) {
+		iommu->default_dom = dma_ops_domain_alloc(iommu, order);
+		if (iommu->default_dom == NULL)
+			return -ENOMEM;
+		ret = iommu_init_unity_mappings(iommu);
+		if (ret)
+			goto free_domains;
+	}
+
+	/*
+	 * If device isolation is enabled, pre-allocate the protection
+	 * domains for each device.
+	 */
+	if (amd_iommu_isolate)
+		prealloc_protection_domains();
+
+	iommu_detected = 1;
+	force_iommu = 1;
+	bad_dma_address = 0;
+#ifdef CONFIG_GART_IOMMU
+	gart_iommu_aperture_disabled = 1;
+	gart_iommu_aperture = 0;
+#endif
+
+	/* Make the driver finally visible to the drivers */
+	dma_ops = &amd_iommu_dma_ops;
+
+	return 0;
+
+free_domains:
+
+	list_for_each_entry(iommu, &amd_iommu_list, list) {
+		if (iommu->default_dom)
+			dma_ops_domain_free(iommu->default_dom);
+	}
+
+	return ret;
+}
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
new file mode 100644
index 000000000000..c9d8ff2eb130
--- /dev/null
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -0,0 +1,1060 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *         Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/gfp.h>
+#include <linux/list.h>
+#include <linux/sysdev.h>
+#include <asm/pci-direct.h>
+#include <asm/amd_iommu_types.h>
+#include <asm/amd_iommu.h>
+#include <asm/iommu.h>
+
+/*
+ * definitions for the ACPI scanning code
+ */
+#define PCI_BUS(x) (((x) >> 8) & 0xff)
+#define IVRS_HEADER_LENGTH 48
+
+#define ACPI_IVHD_TYPE                  0x10
+#define ACPI_IVMD_TYPE_ALL              0x20
+#define ACPI_IVMD_TYPE                  0x21
+#define ACPI_IVMD_TYPE_RANGE            0x22
+
+#define IVHD_DEV_ALL                    0x01
+#define IVHD_DEV_SELECT                 0x02
+#define IVHD_DEV_SELECT_RANGE_START     0x03
+#define IVHD_DEV_RANGE_END              0x04
+#define IVHD_DEV_ALIAS                  0x42
+#define IVHD_DEV_ALIAS_RANGE            0x43
+#define IVHD_DEV_EXT_SELECT             0x46
+#define IVHD_DEV_EXT_SELECT_RANGE       0x47
+
+#define IVHD_FLAG_HT_TUN_EN             0x00
+#define IVHD_FLAG_PASSPW_EN             0x01
+#define IVHD_FLAG_RESPASSPW_EN          0x02
+#define IVHD_FLAG_ISOC_EN               0x03
+
+#define IVMD_FLAG_EXCL_RANGE            0x08
+#define IVMD_FLAG_UNITY_MAP             0x01
+
+#define ACPI_DEVFLAG_INITPASS           0x01
+#define ACPI_DEVFLAG_EXTINT             0x02
+#define ACPI_DEVFLAG_NMI                0x04
+#define ACPI_DEVFLAG_SYSMGT1            0x10
+#define ACPI_DEVFLAG_SYSMGT2            0x20
+#define ACPI_DEVFLAG_LINT0              0x40
+#define ACPI_DEVFLAG_LINT1              0x80
+#define ACPI_DEVFLAG_ATSDIS             0x10000000
+
+/*
+ * ACPI table definitions
+ *
+ * These data structures are laid over the table to parse the important values
+ * out of it.
+ */
+
+/*
+ * structure describing one IOMMU in the ACPI table. Typically followed by one
+ * or more ivhd_entrys.
+ */
+struct ivhd_header {
+	u8 type;
+	u8 flags;
+	u16 length;
+	u16 devid;
+	u16 cap_ptr;
+	u64 mmio_phys;
+	u16 pci_seg;
+	u16 info;
+	u32 reserved;
+} __attribute__((packed));
+
+/*
+ * A device entry describing which devices a specific IOMMU translates and
+ * which requestor ids they use.
+ */
+struct ivhd_entry {
+	u8 type;
+	u16 devid;
+	u8 flags;
+	u32 ext;
+} __attribute__((packed));
+
+/*
+ * An AMD IOMMU memory definition structure. It defines things like exclusion
+ * ranges for devices and regions that should be unity mapped.
+ */
+struct ivmd_header {
+	u8 type;
+	u8 flags;
+	u16 length;
+	u16 devid;
+	u16 aux;
+	u64 resv;
+	u64 range_start;
+	u64 range_length;
+} __attribute__((packed));
+
+static int __initdata amd_iommu_detected;
+
+u16 amd_iommu_last_bdf;			/* largest PCI device id we have
+					   to handle */
+LIST_HEAD(amd_iommu_unity_map);		/* a list of required unity mappings
+					   we find in ACPI */
+unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */
+int amd_iommu_isolate;			/* if 1, device isolation is enabled */
+
+LIST_HEAD(amd_iommu_list);		/* list of all AMD IOMMUs in the
+					   system */
+
+/*
+ * Pointer to the device table which is shared by all AMD IOMMUs
+ * it is indexed by the PCI device id or the HT unit id and contains
+ * information about the domain the device belongs to as well as the
+ * page table root pointer.
+ */
+struct dev_table_entry *amd_iommu_dev_table;
+
+/*
+ * The alias table is a driver specific data structure which contains the
+ * mappings of the PCI device ids to the actual requestor ids on the IOMMU.
+ * More than one device can share the same requestor id.
+ */
+u16 *amd_iommu_alias_table;
+
+/*
+ * The rlookup table is used to find the IOMMU which is responsible
+ * for a specific device. It is also indexed by the PCI device id.
+ */
+struct amd_iommu **amd_iommu_rlookup_table;
+
+/*
+ * The pd table (protection domain table) is used to find the protection domain
+ * data structure a device belongs to. Indexed with the PCI device id too.
+ */
+struct protection_domain **amd_iommu_pd_table;
+
+/*
+ * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap
+ * to know which ones are already in use.
+ */
+unsigned long *amd_iommu_pd_alloc_bitmap;
+
+static u32 dev_table_size;	/* size of the device table */
+static u32 alias_table_size;	/* size of the alias table */
+static u32 rlookup_table_size;	/* size if the rlookup table */
+
+static inline void update_last_devid(u16 devid)
+{
+	if (devid > amd_iommu_last_bdf)
+		amd_iommu_last_bdf = devid;
+}
+
+static inline unsigned long tbl_size(int entry_size)
+{
+	unsigned shift = PAGE_SHIFT +
+			 get_order(amd_iommu_last_bdf * entry_size);
+
+	return 1UL << shift;
+}
+
+/****************************************************************************
+ *
+ * AMD IOMMU MMIO register space handling functions
+ *
+ * These functions are used to program the IOMMU device registers in
+ * MMIO space required for that driver.
+ *
+ ****************************************************************************/
+
+/*
+ * This function set the exclusion range in the IOMMU. DMA accesses to the
+ * exclusion range are passed through untranslated
+ */
+static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
+{
+	u64 start = iommu->exclusion_start & PAGE_MASK;
+	u64 limit = (start + iommu->exclusion_length) & PAGE_MASK;
+	u64 entry;
+
+	if (!iommu->exclusion_start)
+		return;
+
+	entry = start | MMIO_EXCL_ENABLE_MASK;
+	memcpy_toio(iommu->mmio_base + MMIO_EXCL_BASE_OFFSET,
+			&entry, sizeof(entry));
+
+	entry = limit;
+	memcpy_toio(iommu->mmio_base + MMIO_EXCL_LIMIT_OFFSET,
+			&entry, sizeof(entry));
+}
+
+/* Programs the physical address of the device table into the IOMMU hardware */
+static void __init iommu_set_device_table(struct amd_iommu *iommu)
+{
+	u32 entry;
+
+	BUG_ON(iommu->mmio_base == NULL);
+
+	entry = virt_to_phys(amd_iommu_dev_table);
+	entry |= (dev_table_size >> 12) - 1;
+	memcpy_toio(iommu->mmio_base + MMIO_DEV_TABLE_OFFSET,
+			&entry, sizeof(entry));
+}
+
+/* Generic functions to enable/disable certain features of the IOMMU. */
+static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
+{
+	u32 ctrl;
+
+	ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl |= (1 << bit);
+	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
+}
+
+static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
+{
+	u32 ctrl;
+
+	ctrl = (u64)readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl &= ~(1 << bit);
+	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
+}
+
+/* Function to enable the hardware */
+void __init iommu_enable(struct amd_iommu *iommu)
+{
+	printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at ");
+	print_devid(iommu->devid, 0);
+	printk(" cap 0x%hx\n", iommu->cap_ptr);
+
+	iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
+}
+
+/*
+ * mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in
+ * the system has one.
+ */
+static u8 * __init iommu_map_mmio_space(u64 address)
+{
+	u8 *ret;
+
+	if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu"))
+		return NULL;
+
+	ret = ioremap_nocache(address, MMIO_REGION_LENGTH);
+	if (ret != NULL)
+		return ret;
+
+	release_mem_region(address, MMIO_REGION_LENGTH);
+
+	return NULL;
+}
+
+static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu)
+{
+	if (iommu->mmio_base)
+		iounmap(iommu->mmio_base);
+	release_mem_region(iommu->mmio_phys, MMIO_REGION_LENGTH);
+}
+
+/****************************************************************************
+ *
+ * The functions below belong to the first pass of AMD IOMMU ACPI table
+ * parsing. In this pass we try to find out the highest device id this
+ * code has to handle. Upon this information the size of the shared data
+ * structures is determined later.
+ *
+ ****************************************************************************/
+
+/*
+ * This function reads the last device id the IOMMU has to handle from the PCI
+ * capability header for this IOMMU
+ */
+static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr)
+{
+	u32 cap;
+
+	cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
+	update_last_devid(calc_devid(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
+
+	return 0;
+}
+
+/*
+ * After reading the highest device id from the IOMMU PCI capability header
+ * this function looks if there is a higher device id defined in the ACPI table
+ */
+static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
+{
+	u8 *p = (void *)h, *end = (void *)h;
+	struct ivhd_entry *dev;
+
+	p += sizeof(*h);
+	end += h->length;
+
+	find_last_devid_on_pci(PCI_BUS(h->devid),
+			PCI_SLOT(h->devid),
+			PCI_FUNC(h->devid),
+			h->cap_ptr);
+
+	while (p < end) {
+		dev = (struct ivhd_entry *)p;
+		switch (dev->type) {
+		case IVHD_DEV_SELECT:
+		case IVHD_DEV_RANGE_END:
+		case IVHD_DEV_ALIAS:
+		case IVHD_DEV_EXT_SELECT:
+			/* all the above subfield types refer to device ids */
+			update_last_devid(dev->devid);
+			break;
+		default:
+			break;
+		}
+		p += 0x04 << (*p >> 6);
+	}
+
+	WARN_ON(p != end);
+
+	return 0;
+}
+
+/*
+ * Iterate over all IVHD entries in the ACPI table and find the highest device
+ * id which we need to handle. This is the first of three functions which parse
+ * the ACPI table. So we check the checksum here.
+ */
+static int __init find_last_devid_acpi(struct acpi_table_header *table)
+{
+	int i;
+	u8 checksum = 0, *p = (u8 *)table, *end = (u8 *)table;
+	struct ivhd_header *h;
+
+	/*
+	 * Validate checksum here so we don't need to do it when
+	 * we actually parse the table
+	 */
+	for (i = 0; i < table->length; ++i)
+		checksum += p[i];
+	if (checksum != 0)
+		/* ACPI table corrupt */
+		return -ENODEV;
+
+	p += IVRS_HEADER_LENGTH;
+
+	end += table->length;
+	while (p < end) {
+		h = (struct ivhd_header *)p;
+		switch (h->type) {
+		case ACPI_IVHD_TYPE:
+			find_last_devid_from_ivhd(h);
+			break;
+		default:
+			break;
+		}
+		p += h->length;
+	}
+	WARN_ON(p != end);
+
+	return 0;
+}
+
+/****************************************************************************
+ *
+ * The following functions belong the the code path which parses the ACPI table
+ * the second time. In this ACPI parsing iteration we allocate IOMMU specific
+ * data structures, initialize the device/alias/rlookup table and also
+ * basically initialize the hardware.
+ *
+ ****************************************************************************/
+
+/*
+ * Allocates the command buffer. This buffer is per AMD IOMMU. We can
+ * write commands to that buffer later and the IOMMU will execute them
+ * asynchronously
+ */
+static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
+{
+	u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+			get_order(CMD_BUFFER_SIZE));
+	u64 entry;
+
+	if (cmd_buf == NULL)
+		return NULL;
+
+	iommu->cmd_buf_size = CMD_BUFFER_SIZE;
+
+	entry = (u64)virt_to_phys(cmd_buf);
+	entry |= MMIO_CMD_SIZE_512;
+	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
+			&entry, sizeof(entry));
+
+	iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+
+	return cmd_buf;
+}
+
+static void __init free_command_buffer(struct amd_iommu *iommu)
+{
+	free_pages((unsigned long)iommu->cmd_buf, get_order(CMD_BUFFER_SIZE));
+}
+
+/* sets a specific bit in the device table entry. */
+static void set_dev_entry_bit(u16 devid, u8 bit)
+{
+	int i = (bit >> 5) & 0x07;
+	int _bit = bit & 0x1f;
+
+	amd_iommu_dev_table[devid].data[i] |= (1 << _bit);
+}
+
+/* Writes the specific IOMMU for a device into the rlookup table */
+static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
+{
+	amd_iommu_rlookup_table[devid] = iommu;
+}
+
+/*
+ * This function takes the device specific flags read from the ACPI
+ * table and sets up the device table entry with that information
+ */
+static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu,
+					   u16 devid, u32 flags, u32 ext_flags)
+{
+	if (flags & ACPI_DEVFLAG_INITPASS)
+		set_dev_entry_bit(devid, DEV_ENTRY_INIT_PASS);
+	if (flags & ACPI_DEVFLAG_EXTINT)
+		set_dev_entry_bit(devid, DEV_ENTRY_EINT_PASS);
+	if (flags & ACPI_DEVFLAG_NMI)
+		set_dev_entry_bit(devid, DEV_ENTRY_NMI_PASS);
+	if (flags & ACPI_DEVFLAG_SYSMGT1)
+		set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1);
+	if (flags & ACPI_DEVFLAG_SYSMGT2)
+		set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2);
+	if (flags & ACPI_DEVFLAG_LINT0)
+		set_dev_entry_bit(devid, DEV_ENTRY_LINT0_PASS);
+	if (flags & ACPI_DEVFLAG_LINT1)
+		set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
+
+	set_iommu_for_device(iommu, devid);
+}
+
+/*
+ * Reads the device exclusion range from ACPI and initialize IOMMU with
+ * it
+ */
+static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
+{
+	struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
+
+	if (!(m->flags & IVMD_FLAG_EXCL_RANGE))
+		return;
+
+	if (iommu) {
+		/*
+		 * We only can configure exclusion ranges per IOMMU, not
+		 * per device. But we can enable the exclusion range per
+		 * device. This is done here
+		 */
+		set_dev_entry_bit(m->devid, DEV_ENTRY_EX);
+		iommu->exclusion_start = m->range_start;
+		iommu->exclusion_length = m->range_length;
+	}
+}
+
+/*
+ * This function reads some important data from the IOMMU PCI space and
+ * initializes the driver data structure with it. It reads the hardware
+ * capabilities and the first/last device entries
+ */
+static void __init init_iommu_from_pci(struct amd_iommu *iommu)
+{
+	int bus = PCI_BUS(iommu->devid);
+	int dev = PCI_SLOT(iommu->devid);
+	int fn  = PCI_FUNC(iommu->devid);
+	int cap_ptr = iommu->cap_ptr;
+	u32 range;
+
+	iommu->cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_CAP_HDR_OFFSET);
+
+	range = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
+	iommu->first_device = calc_devid(MMIO_GET_BUS(range),
+					 MMIO_GET_FD(range));
+	iommu->last_device = calc_devid(MMIO_GET_BUS(range),
+					MMIO_GET_LD(range));
+}
+
+/*
+ * Takes a pointer to an AMD IOMMU entry in the ACPI table and
+ * initializes the hardware and our data structures with it.
+ */
+static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
+					struct ivhd_header *h)
+{
+	u8 *p = (u8 *)h;
+	u8 *end = p, flags = 0;
+	u16 dev_i, devid = 0, devid_start = 0, devid_to = 0;
+	u32 ext_flags = 0;
+	bool alias = false;
+	struct ivhd_entry *e;
+
+	/*
+	 * First set the recommended feature enable bits from ACPI
+	 * into the IOMMU control registers
+	 */
+	h->flags & IVHD_FLAG_HT_TUN_EN ?
+		iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
+		iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
+
+	h->flags & IVHD_FLAG_PASSPW_EN ?
+		iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
+		iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
+
+	h->flags & IVHD_FLAG_RESPASSPW_EN ?
+		iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
+		iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
+
+	h->flags & IVHD_FLAG_ISOC_EN ?
+		iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
+		iommu_feature_disable(iommu, CONTROL_ISOC_EN);
+
+	/*
+	 * make IOMMU memory accesses cache coherent
+	 */
+	iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
+
+	/*
+	 * Done. Now parse the device entries
+	 */
+	p += sizeof(struct ivhd_header);
+	end += h->length;
+
+	while (p < end) {
+		e = (struct ivhd_entry *)p;
+		switch (e->type) {
+		case IVHD_DEV_ALL:
+			for (dev_i = iommu->first_device;
+					dev_i <= iommu->last_device; ++dev_i)
+				set_dev_entry_from_acpi(iommu, dev_i,
+							e->flags, 0);
+			break;
+		case IVHD_DEV_SELECT:
+			devid = e->devid;
+			set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
+			break;
+		case IVHD_DEV_SELECT_RANGE_START:
+			devid_start = e->devid;
+			flags = e->flags;
+			ext_flags = 0;
+			alias = false;
+			break;
+		case IVHD_DEV_ALIAS:
+			devid = e->devid;
+			devid_to = e->ext >> 8;
+			set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
+			amd_iommu_alias_table[devid] = devid_to;
+			break;
+		case IVHD_DEV_ALIAS_RANGE:
+			devid_start = e->devid;
+			flags = e->flags;
+			devid_to = e->ext >> 8;
+			ext_flags = 0;
+			alias = true;
+			break;
+		case IVHD_DEV_EXT_SELECT:
+			devid = e->devid;
+			set_dev_entry_from_acpi(iommu, devid, e->flags,
+						e->ext);
+			break;
+		case IVHD_DEV_EXT_SELECT_RANGE:
+			devid_start = e->devid;
+			flags = e->flags;
+			ext_flags = e->ext;
+			alias = false;
+			break;
+		case IVHD_DEV_RANGE_END:
+			devid = e->devid;
+			for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
+				if (alias)
+					amd_iommu_alias_table[dev_i] = devid_to;
+				set_dev_entry_from_acpi(iommu,
+						amd_iommu_alias_table[dev_i],
+						flags, ext_flags);
+			}
+			break;
+		default:
+			break;
+		}
+
+		p += 0x04 << (e->type >> 6);
+	}
+}
+
+/* Initializes the device->iommu mapping for the driver */
+static int __init init_iommu_devices(struct amd_iommu *iommu)
+{
+	u16 i;
+
+	for (i = iommu->first_device; i <= iommu->last_device; ++i)
+		set_iommu_for_device(iommu, i);
+
+	return 0;
+}
+
+static void __init free_iommu_one(struct amd_iommu *iommu)
+{
+	free_command_buffer(iommu);
+	iommu_unmap_mmio_space(iommu);
+}
+
+static void __init free_iommu_all(void)
+{
+	struct amd_iommu *iommu, *next;
+
+	list_for_each_entry_safe(iommu, next, &amd_iommu_list, list) {
+		list_del(&iommu->list);
+		free_iommu_one(iommu);
+		kfree(iommu);
+	}
+}
+
+/*
+ * This function clues the initialization function for one IOMMU
+ * together and also allocates the command buffer and programs the
+ * hardware. It does NOT enable the IOMMU. This is done afterwards.
+ */
+static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
+{
+	spin_lock_init(&iommu->lock);
+	list_add_tail(&iommu->list, &amd_iommu_list);
+
+	/*
+	 * Copy data from ACPI table entry to the iommu struct
+	 */
+	iommu->devid = h->devid;
+	iommu->cap_ptr = h->cap_ptr;
+	iommu->mmio_phys = h->mmio_phys;
+	iommu->mmio_base = iommu_map_mmio_space(h->mmio_phys);
+	if (!iommu->mmio_base)
+		return -ENOMEM;
+
+	iommu_set_device_table(iommu);
+	iommu->cmd_buf = alloc_command_buffer(iommu);
+	if (!iommu->cmd_buf)
+		return -ENOMEM;
+
+	init_iommu_from_pci(iommu);
+	init_iommu_from_acpi(iommu, h);
+	init_iommu_devices(iommu);
+
+	return 0;
+}
+
+/*
+ * Iterates over all IOMMU entries in the ACPI table, allocates the
+ * IOMMU structure and initializes it with init_iommu_one()
+ */
+static int __init init_iommu_all(struct acpi_table_header *table)
+{
+	u8 *p = (u8 *)table, *end = (u8 *)table;
+	struct ivhd_header *h;
+	struct amd_iommu *iommu;
+	int ret;
+
+	end += table->length;
+	p += IVRS_HEADER_LENGTH;
+
+	while (p < end) {
+		h = (struct ivhd_header *)p;
+		switch (*p) {
+		case ACPI_IVHD_TYPE:
+			iommu = kzalloc(sizeof(struct amd_iommu), GFP_KERNEL);
+			if (iommu == NULL)
+				return -ENOMEM;
+			ret = init_iommu_one(iommu, h);
+			if (ret)
+				return ret;
+			break;
+		default:
+			break;
+		}
+		p += h->length;
+
+	}
+	WARN_ON(p != end);
+
+	return 0;
+}
+
+/****************************************************************************
+ *
+ * The next functions belong to the third pass of parsing the ACPI
+ * table. In this last pass the memory mapping requirements are
+ * gathered (like exclusion and unity mapping reanges).
+ *
+ ****************************************************************************/
+
+static void __init free_unity_maps(void)
+{
+	struct unity_map_entry *entry, *next;
+
+	list_for_each_entry_safe(entry, next, &amd_iommu_unity_map, list) {
+		list_del(&entry->list);
+		kfree(entry);
+	}
+}
+
+/* called when we find an exclusion range definition in ACPI */
+static int __init init_exclusion_range(struct ivmd_header *m)
+{
+	int i;
+
+	switch (m->type) {
+	case ACPI_IVMD_TYPE:
+		set_device_exclusion_range(m->devid, m);
+		break;
+	case ACPI_IVMD_TYPE_ALL:
+		for (i = 0; i < amd_iommu_last_bdf; ++i)
+			set_device_exclusion_range(i, m);
+		break;
+	case ACPI_IVMD_TYPE_RANGE:
+		for (i = m->devid; i <= m->aux; ++i)
+			set_device_exclusion_range(i, m);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/* called for unity map ACPI definition */
+static int __init init_unity_map_range(struct ivmd_header *m)
+{
+	struct unity_map_entry *e = 0;
+
+	e = kzalloc(sizeof(*e), GFP_KERNEL);
+	if (e == NULL)
+		return -ENOMEM;
+
+	switch (m->type) {
+	default:
+	case ACPI_IVMD_TYPE:
+		e->devid_start = e->devid_end = m->devid;
+		break;
+	case ACPI_IVMD_TYPE_ALL:
+		e->devid_start = 0;
+		e->devid_end = amd_iommu_last_bdf;
+		break;
+	case ACPI_IVMD_TYPE_RANGE:
+		e->devid_start = m->devid;
+		e->devid_end = m->aux;
+		break;
+	}
+	e->address_start = PAGE_ALIGN(m->range_start);
+	e->address_end = e->address_start + PAGE_ALIGN(m->range_length);
+	e->prot = m->flags >> 1;
+
+	list_add_tail(&e->list, &amd_iommu_unity_map);
+
+	return 0;
+}
+
+/* iterates over all memory definitions we find in the ACPI table */
+static int __init init_memory_definitions(struct acpi_table_header *table)
+{
+	u8 *p = (u8 *)table, *end = (u8 *)table;
+	struct ivmd_header *m;
+
+	end += table->length;
+	p += IVRS_HEADER_LENGTH;
+
+	while (p < end) {
+		m = (struct ivmd_header *)p;
+		if (m->flags & IVMD_FLAG_EXCL_RANGE)
+			init_exclusion_range(m);
+		else if (m->flags & IVMD_FLAG_UNITY_MAP)
+			init_unity_map_range(m);
+
+		p += m->length;
+	}
+
+	return 0;
+}
+
+/*
+ * This function finally enables all IOMMUs found in the system after
+ * they have been initialized
+ */
+static void __init enable_iommus(void)
+{
+	struct amd_iommu *iommu;
+
+	list_for_each_entry(iommu, &amd_iommu_list, list) {
+		iommu_set_exclusion_range(iommu);
+		iommu_enable(iommu);
+	}
+}
+
+/*
+ * Suspend/Resume support
+ * disable suspend until real resume implemented
+ */
+
+static int amd_iommu_resume(struct sys_device *dev)
+{
+	return 0;
+}
+
+static int amd_iommu_suspend(struct sys_device *dev, pm_message_t state)
+{
+	return -EINVAL;
+}
+
+static struct sysdev_class amd_iommu_sysdev_class = {
+	.name = "amd_iommu",
+	.suspend = amd_iommu_suspend,
+	.resume = amd_iommu_resume,
+};
+
+static struct sys_device device_amd_iommu = {
+	.id = 0,
+	.cls = &amd_iommu_sysdev_class,
+};
+
+/*
+ * This is the core init function for AMD IOMMU hardware in the system.
+ * This function is called from the generic x86 DMA layer initialization
+ * code.
+ *
+ * This function basically parses the ACPI table for AMD IOMMU (IVRS)
+ * three times:
+ *
+ *	1 pass) Find the highest PCI device id the driver has to handle.
+ *		Upon this information the size of the data structures is
+ *		determined that needs to be allocated.
+ *
+ *	2 pass) Initialize the data structures just allocated with the
+ *		information in the ACPI table about available AMD IOMMUs
+ *		in the system. It also maps the PCI devices in the
+ *		system to specific IOMMUs
+ *
+ *	3 pass) After the basic data structures are allocated and
+ *		initialized we update them with information about memory
+ *		remapping requirements parsed out of the ACPI table in
+ *		this last pass.
+ *
+ * After that the hardware is initialized and ready to go. In the last
+ * step we do some Linux specific things like registering the driver in
+ * the dma_ops interface and initializing the suspend/resume support
+ * functions. Finally it prints some information about AMD IOMMUs and
+ * the driver state and enables the hardware.
+ */
+int __init amd_iommu_init(void)
+{
+	int i, ret = 0;
+
+
+	if (no_iommu) {
+		printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n");
+		return 0;
+	}
+
+	if (!amd_iommu_detected)
+		return -ENODEV;
+
+	/*
+	 * First parse ACPI tables to find the largest Bus/Dev/Func
+	 * we need to handle. Upon this information the shared data
+	 * structures for the IOMMUs in the system will be allocated
+	 */
+	if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0)
+		return -ENODEV;
+
+	dev_table_size     = tbl_size(DEV_TABLE_ENTRY_SIZE);
+	alias_table_size   = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
+	rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);
+
+	ret = -ENOMEM;
+
+	/* Device table - directly used by all IOMMUs */
+	amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+				      get_order(dev_table_size));
+	if (amd_iommu_dev_table == NULL)
+		goto out;
+
+	/*
+	 * Alias table - map PCI Bus/Dev/Func to Bus/Dev/Func the
+	 * IOMMU see for that device
+	 */
+	amd_iommu_alias_table = (void *)__get_free_pages(GFP_KERNEL,
+			get_order(alias_table_size));
+	if (amd_iommu_alias_table == NULL)
+		goto free;
+
+	/* IOMMU rlookup table - find the IOMMU for a specific device */
+	amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL,
+			get_order(rlookup_table_size));
+	if (amd_iommu_rlookup_table == NULL)
+		goto free;
+
+	/*
+	 * Protection Domain table - maps devices to protection domains
+	 * This table has the same size as the rlookup_table
+	 */
+	amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+				     get_order(rlookup_table_size));
+	if (amd_iommu_pd_table == NULL)
+		goto free;
+
+	amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(
+					    GFP_KERNEL | __GFP_ZERO,
+					    get_order(MAX_DOMAIN_ID/8));
+	if (amd_iommu_pd_alloc_bitmap == NULL)
+		goto free;
+
+	/*
+	 * let all alias entries point to itself
+	 */
+	for (i = 0; i < amd_iommu_last_bdf; ++i)
+		amd_iommu_alias_table[i] = i;
+
+	/*
+	 * never allocate domain 0 because its used as the non-allocated and
+	 * error value placeholder
+	 */
+	amd_iommu_pd_alloc_bitmap[0] = 1;
+
+	/*
+	 * now the data structures are allocated and basically initialized
+	 * start the real acpi table scan
+	 */
+	ret = -ENODEV;
+	if (acpi_table_parse("IVRS", init_iommu_all) != 0)
+		goto free;
+
+	if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
+		goto free;
+
+	ret = amd_iommu_init_dma_ops();
+	if (ret)
+		goto free;
+
+	ret = sysdev_class_register(&amd_iommu_sysdev_class);
+	if (ret)
+		goto free;
+
+	ret = sysdev_register(&device_amd_iommu);
+	if (ret)
+		goto free;
+
+	enable_iommus();
+
+	printk(KERN_INFO "AMD IOMMU: aperture size is %d MB\n",
+			(1 << (amd_iommu_aperture_order-20)));
+
+	printk(KERN_INFO "AMD IOMMU: device isolation ");
+	if (amd_iommu_isolate)
+		printk("enabled\n");
+	else
+		printk("disabled\n");
+
+out:
+	return ret;
+
+free:
+	free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
+
+	free_pages((unsigned long)amd_iommu_pd_table,
+		   get_order(rlookup_table_size));
+
+	free_pages((unsigned long)amd_iommu_rlookup_table,
+		   get_order(rlookup_table_size));
+
+	free_pages((unsigned long)amd_iommu_alias_table,
+		   get_order(alias_table_size));
+
+	free_pages((unsigned long)amd_iommu_dev_table,
+		   get_order(dev_table_size));
+
+	free_iommu_all();
+
+	free_unity_maps();
+
+	goto out;
+}
+
+/****************************************************************************
+ *
+ * Early detect code. This code runs at IOMMU detection time in the DMA
+ * layer. It just looks if there is an IVRS ACPI table to detect AMD
+ * IOMMUs
+ *
+ ****************************************************************************/
+static int __init early_amd_iommu_detect(struct acpi_table_header *table)
+{
+	return 0;
+}
+
+void __init amd_iommu_detect(void)
+{
+	if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture))
+		return;
+
+	if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
+		iommu_detected = 1;
+		amd_iommu_detected = 1;
+#ifdef CONFIG_GART_IOMMU
+		gart_iommu_aperture_disabled = 1;
+		gart_iommu_aperture = 0;
+#endif
+	}
+}
+
+/****************************************************************************
+ *
+ * Parsing functions for the AMD IOMMU specific kernel command line
+ * options.
+ *
+ ****************************************************************************/
+
+static int __init parse_amd_iommu_options(char *str)
+{
+	for (; *str; ++str) {
+		if (strcmp(str, "isolate") == 0)
+			amd_iommu_isolate = 1;
+	}
+
+	return 1;
+}
+
+static int __init parse_amd_iommu_size_options(char *str)
+{
+	unsigned order = PAGE_SHIFT + get_order(memparse(str, &str));
+
+	if ((order > 24) && (order < 31))
+		amd_iommu_aperture_order = order;
+
+	return 1;
+}
+
+__setup("amd_iommu=", parse_amd_iommu_options);
+__setup("amd_iommu_size=", parse_amd_iommu_size_options);
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 479926d9e004..44e21826db11 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -21,6 +21,7 @@
 #include <linux/suspend.h>
 #include <asm/e820.h>
 #include <asm/io.h>
+#include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
@@ -35,6 +36,18 @@ int fallback_aper_force __initdata;
 
 int fix_aperture __initdata = 1;
 
+struct bus_dev_range {
+	int bus;
+	int dev_base;
+	int dev_limit;
+};
+
+static struct bus_dev_range bus_dev_ranges[] __initdata = {
+	{ 0x00, 0x18, 0x20},
+	{ 0xff, 0x00, 0x20},
+	{ 0xfe, 0x00, 0x20}
+};
+
 static struct resource gart_resource = {
 	.name	= "GART",
 	.flags	= IORESOURCE_MEM,
@@ -55,8 +68,9 @@ static u32 __init allocate_aperture(void)
 	u32 aper_size;
 	void *p;
 
-	if (fallback_aper_order > 7)
-		fallback_aper_order = 7;
+	/* aper_size should <= 1G */
+	if (fallback_aper_order > 5)
+		fallback_aper_order = 5;
 	aper_size = (32 * 1024 * 1024) << fallback_aper_order;
 
 	/*
@@ -65,7 +79,20 @@ static u32 __init allocate_aperture(void)
 	 * memory. Unfortunately we cannot move it up because that would
 	 * make the IOMMU useless.
 	 */
-	p = __alloc_bootmem_nopanic(aper_size, aper_size, 0);
+	/*
+	 * using 512M as goal, in case kexec will load kernel_big
+	 * that will do the on position decompress, and  could overlap with
+	 * that positon with gart that is used.
+	 * sequende:
+	 * kernel_small
+	 * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
+	 * ==> kernel_small(gart area become e820_reserved)
+	 * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
+	 * ==> kerne_big (uncompressed size will be big than 64M or 128M)
+	 * so don't use 512M below as gart iommu, leave the space for kernel
+	 * code for safe
+	 */
+	p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20);
 	if (!p || __pa(p)+aper_size > 0xffffffff) {
 		printk(KERN_ERR
 			"Cannot allocate aperture memory hole (%p,%uK)\n",
@@ -83,69 +110,53 @@ static u32 __init allocate_aperture(void)
 	return (u32)__pa(p);
 }
 
-static int __init aperture_valid(u64 aper_base, u32 aper_size)
-{
-	if (!aper_base)
-		return 0;
-
-	if (aper_base + aper_size > 0x100000000UL) {
-		printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n");
-		return 0;
-	}
-	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
-		printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n");
-		return 0;
-	}
-	if (aper_size < 64*1024*1024) {
-		printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20);
-		return 0;
-	}
-
-	return 1;
-}
 
 /* Find a PCI capability */
-static __u32 __init find_cap(int num, int slot, int func, int cap)
+static u32 __init find_cap(int bus, int slot, int func, int cap)
 {
 	int bytes;
 	u8 pos;
 
-	if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+	if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) &
 						PCI_STATUS_CAP_LIST))
 		return 0;
 
-	pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+	pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST);
 	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
 		u8 id;
 
 		pos &= ~3;
-		id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+		id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID);
 		if (id == 0xff)
 			break;
 		if (id == cap)
 			return pos;
-		pos = read_pci_config_byte(num, slot, func,
+		pos = read_pci_config_byte(bus, slot, func,
 						pos+PCI_CAP_LIST_NEXT);
 	}
 	return 0;
 }
 
 /* Read a standard AGPv3 bridge header */
-static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
+static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
 {
 	u32 apsize;
 	u32 apsizereg;
 	int nbits;
 	u32 aper_low, aper_hi;
 	u64 aper;
+	u32 old_order;
 
-	printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func);
-	apsizereg = read_pci_config_16(num, slot, func, cap + 0x14);
+	printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func);
+	apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14);
 	if (apsizereg == 0xffffffff) {
 		printk(KERN_ERR "APSIZE in AGP bridge unreadable\n");
 		return 0;
 	}
 
+	/* old_order could be the value from NB gart setting */
+	old_order = *order;
+
 	apsize = apsizereg & 0xfff;
 	/* Some BIOS use weird encodings not in the AGPv3 table. */
 	if (apsize & 0xff)
@@ -155,14 +166,26 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
 	if ((int)*order < 0) /* < 32MB */
 		*order = 0;
 
-	aper_low = read_pci_config(num, slot, func, 0x10);
-	aper_hi = read_pci_config(num, slot, func, 0x14);
+	aper_low = read_pci_config(bus, slot, func, 0x10);
+	aper_hi = read_pci_config(bus, slot, func, 0x14);
 	aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32);
 
+	/*
+	 * On some sick chips, APSIZE is 0. It means it wants 4G
+	 * so let double check that order, and lets trust AMD NB settings:
+	 */
+	printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n",
+			aper, 32 << old_order);
+	if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) {
+		printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n",
+				32 << *order, apsizereg);
+		*order = old_order;
+	}
+
 	printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n",
 			aper, 32 << *order, apsizereg);
 
-	if (!aperture_valid(aper, (32*1024*1024) << *order))
+	if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20))
 		return 0;
 	return (u32)aper;
 }
@@ -180,17 +203,17 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
  * the AGP bridges should be always an own bus on the HT hierarchy,
  * but do it here for future safety.
  */
-static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
+static u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 {
-	int num, slot, func;
+	int bus, slot, func;
 
 	/* Poor man's PCI discovery */
-	for (num = 0; num < 256; num++) {
+	for (bus = 0; bus < 256; bus++) {
 		for (slot = 0; slot < 32; slot++) {
 			for (func = 0; func < 8; func++) {
 				u32 class, cap;
 				u8 type;
-				class = read_pci_config(num, slot, func,
+				class = read_pci_config(bus, slot, func,
 							PCI_CLASS_REVISION);
 				if (class == 0xffffffff)
 					break;
@@ -199,17 +222,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 				case PCI_CLASS_BRIDGE_HOST:
 				case PCI_CLASS_BRIDGE_OTHER: /* needed? */
 					/* AGP bridge? */
-					cap = find_cap(num, slot, func,
+					cap = find_cap(bus, slot, func,
 							PCI_CAP_ID_AGP);
 					if (!cap)
 						break;
 					*valid_agp = 1;
-					return read_agp(num, slot, func, cap,
+					return read_agp(bus, slot, func, cap,
 							order);
 				}
 
 				/* No multi-function device? */
-				type = read_pci_config_byte(num, slot, func,
+				type = read_pci_config_byte(bus, slot, func,
 							       PCI_HEADER_TYPE);
 				if (!(type & 0x80))
 					break;
@@ -249,36 +272,50 @@ void __init early_gart_iommu_check(void)
 	 * or BIOS forget to put that in reserved.
 	 * try to update e820 to make that region as reserved.
 	 */
-	int fix, num;
+	int i, fix, slot;
 	u32 ctl;
 	u32 aper_size = 0, aper_order = 0, last_aper_order = 0;
 	u64 aper_base = 0, last_aper_base = 0;
-	int aper_enabled = 0, last_aper_enabled = 0;
+	int aper_enabled = 0, last_aper_enabled = 0, last_valid = 0;
 
 	if (!early_pci_allowed())
 		return;
 
+	/* This is mostly duplicate of iommu_hole_init */
 	fix = 0;
-	for (num = 24; num < 32; num++) {
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;
-
-		ctl = read_pci_config(0, num, 3, 0x90);
-		aper_enabled = ctl & 1;
-		aper_order = (ctl >> 1) & 7;
-		aper_size = (32 * 1024 * 1024) << aper_order;
-		aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
-		aper_base <<= 25;
-
-		if ((last_aper_order && aper_order != last_aper_order) ||
-		    (last_aper_base && aper_base != last_aper_base) ||
-		    (last_aper_enabled && aper_enabled != last_aper_enabled)) {
-			fix = 1;
-			break;
+	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+		int bus;
+		int dev_base, dev_limit;
+
+		bus = bus_dev_ranges[i].bus;
+		dev_base = bus_dev_ranges[i].dev_base;
+		dev_limit = bus_dev_ranges[i].dev_limit;
+
+		for (slot = dev_base; slot < dev_limit; slot++) {
+			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+				continue;
+
+			ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+			aper_enabled = ctl & AMD64_GARTEN;
+			aper_order = (ctl >> 1) & 7;
+			aper_size = (32 * 1024 * 1024) << aper_order;
+			aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+			aper_base <<= 25;
+
+			if (last_valid) {
+				if ((aper_order != last_aper_order) ||
+				    (aper_base != last_aper_base) ||
+				    (aper_enabled != last_aper_enabled)) {
+					fix = 1;
+					break;
+				}
+			}
+
+			last_aper_order = aper_order;
+			last_aper_base = aper_base;
+			last_aper_enabled = aper_enabled;
+			last_valid = 1;
 		}
-		last_aper_order = aper_order;
-		last_aper_base = aper_base;
-		last_aper_enabled = aper_enabled;
 	}
 
 	if (!fix && !aper_enabled)
@@ -290,32 +327,46 @@ void __init early_gart_iommu_check(void)
 	if (gart_fix_e820 && !fix && aper_enabled) {
 		if (e820_any_mapped(aper_base, aper_base + aper_size,
 				    E820_RAM)) {
-			/* reserved it, so we can resuse it in second kernel */
+			/* reserve it, so we can reuse it in second kernel */
 			printk(KERN_INFO "update e820 for GART\n");
-			add_memory_region(aper_base, aper_size, E820_RESERVED);
+			e820_add_region(aper_base, aper_size, E820_RESERVED);
 			update_e820();
 		}
-		return;
 	}
 
+	if (!fix)
+		return;
+
 	/* different nodes have different setting, disable them all at first*/
-	for (num = 24; num < 32; num++) {
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;
+	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+		int bus;
+		int dev_base, dev_limit;
+
+		bus = bus_dev_ranges[i].bus;
+		dev_base = bus_dev_ranges[i].dev_base;
+		dev_limit = bus_dev_ranges[i].dev_limit;
+
+		for (slot = dev_base; slot < dev_limit; slot++) {
+			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+				continue;
 
-		ctl = read_pci_config(0, num, 3, 0x90);
-		ctl &= ~1;
-		write_pci_config(0, num, 3, 0x90, ctl);
+			ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+			ctl &= ~AMD64_GARTEN;
+			write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
+		}
 	}
 
 }
 
+static int __initdata printed_gart_size_msg;
+
 void __init gart_iommu_hole_init(void)
 {
+	u32 agp_aper_base = 0, agp_aper_order = 0;
 	u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
 	u64 aper_base, last_aper_base = 0;
-	int fix, num, valid_agp = 0;
-	int node;
+	int fix, slot, valid_agp = 0;
+	int i, node;
 
 	if (gart_iommu_aperture_disabled || !fix_aperture ||
 	    !early_pci_allowed())
@@ -323,38 +374,65 @@ void __init gart_iommu_hole_init(void)
 
 	printk(KERN_INFO  "Checking aperture...\n");
 
+	if (!fallback_aper_force)
+		agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp);
+
 	fix = 0;
 	node = 0;
-	for (num = 24; num < 32; num++) {
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;
-
-		iommu_detected = 1;
-		gart_iommu_aperture = 1;
-
-		aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
-		aper_size = (32 * 1024 * 1024) << aper_order;
-		aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
-		aper_base <<= 25;
-
-		printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
-				node, aper_base, aper_size >> 20);
-		node++;
-
-		if (!aperture_valid(aper_base, aper_size)) {
-			fix = 1;
-			break;
-		}
+	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+		int bus;
+		int dev_base, dev_limit;
+
+		bus = bus_dev_ranges[i].bus;
+		dev_base = bus_dev_ranges[i].dev_base;
+		dev_limit = bus_dev_ranges[i].dev_limit;
+
+		for (slot = dev_base; slot < dev_limit; slot++) {
+			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+				continue;
+
+			iommu_detected = 1;
+			gart_iommu_aperture = 1;
+
+			aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
+			aper_size = (32 * 1024 * 1024) << aper_order;
+			aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+			aper_base <<= 25;
+
+			printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
+					node, aper_base, aper_size >> 20);
+			node++;
+
+			if (!aperture_valid(aper_base, aper_size, 64<<20)) {
+				if (valid_agp && agp_aper_base &&
+				    agp_aper_base == aper_base &&
+				    agp_aper_order == aper_order) {
+					/* the same between two setting from NB and agp */
+					if (!no_iommu &&
+					    max_pfn > MAX_DMA32_PFN &&
+					    !printed_gart_size_msg) {
+						printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n");
+						printk(KERN_ERR "please increase GART size in your BIOS setup\n");
+						printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n");
+						printed_gart_size_msg = 1;
+					}
+				} else {
+					fix = 1;
+					goto out;
+				}
+			}
 
-		if ((last_aper_order && aper_order != last_aper_order) ||
-		    (last_aper_base && aper_base != last_aper_base)) {
-			fix = 1;
-			break;
+			if ((last_aper_order && aper_order != last_aper_order) ||
+			    (last_aper_base && aper_base != last_aper_base)) {
+				fix = 1;
+				goto out;
+			}
+			last_aper_order = aper_order;
+			last_aper_base = aper_base;
 		}
-		last_aper_order = aper_order;
-		last_aper_base = aper_base;
 	}
 
+out:
 	if (!fix && !fallback_aper_force) {
 		if (last_aper_base) {
 			unsigned long n = (32 * 1024 * 1024) << last_aper_order;
@@ -364,14 +442,16 @@ void __init gart_iommu_hole_init(void)
 		return;
 	}
 
-	if (!fallback_aper_force)
-		aper_alloc = search_agp_bridge(&aper_order, &valid_agp);
+	if (!fallback_aper_force) {
+		aper_alloc = agp_aper_base;
+		aper_order = agp_aper_order;
+	}
 
 	if (aper_alloc) {
 		/* Got the aperture from the AGP bridge */
 	} else if (swiotlb && !valid_agp) {
 		/* Do nothing */
-	} else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
+	} else if ((!no_iommu && max_pfn > MAX_DMA32_PFN) ||
 		   force_iommu ||
 		   valid_agp ||
 		   fallback_aper_force) {
@@ -401,16 +481,24 @@ void __init gart_iommu_hole_init(void)
 	}
 
 	/* Fix up the north bridges */
-	for (num = 24; num < 32; num++) {
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;
-
-		/*
-		 * Don't enable translation yet. That is done later.
-		 * Assume this BIOS didn't initialise the GART so
-		 * just overwrite all previous bits
-		 */
-		write_pci_config(0, num, 3, 0x90, aper_order<<1);
-		write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
+	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+		int bus;
+		int dev_base, dev_limit;
+
+		bus = bus_dev_ranges[i].bus;
+		dev_base = bus_dev_ranges[i].dev_base;
+		dev_limit = bus_dev_ranges[i].dev_limit;
+		for (slot = dev_base; slot < dev_limit; slot++) {
+			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+				continue;
+
+			/* Don't enable translation yet. That is done later.
+			   Assume this BIOS didn't initialise the GART so
+			   just overwrite all previous bits */
+			write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1);
+			write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25);
+		}
 	}
+
+	set_up_gart_resume(aper_order, aper_alloc);
 }
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 4b99b1bdeb6c..d6c898358371 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -52,29 +52,40 @@
 
 unsigned long mp_lapic_addr;
 
-DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
 /*
  * Knob to control our willingness to enable the local APIC.
  *
- * -1=force-disable, +1=force-enable
+ * +1=force-enable
  */
-static int enable_local_apic __initdata;
+static int force_enable_local_apic;
+int disable_apic;
 
 /* Local APIC timer verification ok */
 static int local_apic_timer_verify_ok;
-/* Disable local APIC timer from the kernel commandline or via dmi quirk
-   or using CPU MSR check */
-int local_apic_timer_disabled;
+/* Disable local APIC timer from the kernel commandline or via dmi quirk */
+static int local_apic_timer_disabled;
 /* Local APIC timer works in C2 */
 int local_apic_timer_c2_ok;
 EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
 
+int first_system_vector = 0xfe;
+
+char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
+
 /*
  * Debug level, exported for io_apic.c
  */
-int apic_verbosity;
+unsigned int apic_verbosity;
+
+int pic_mode;
+
+/* Have we found an MP table */
+int smp_found_config;
+
+static struct resource lapic_resource = {
+	.name = "Local APIC",
+	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
 
 static unsigned int calibration_result;
 
@@ -166,7 +177,7 @@ void __cpuinit enable_NMI_through_LVT0(void)
 	/* Level triggered for 82489DX */
 	if (!lapic_is_integrated())
 		v |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write_around(APIC_LVT0, v);
+	apic_write(APIC_LVT0, v);
 }
 
 /**
@@ -201,9 +212,6 @@ int lapic_get_maxlvt(void)
  * this function twice on the boot CPU, once with a bogus timeout
  * value, second time for real. The other (noncalibrating) CPUs
  * call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
  */
 static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 {
@@ -218,18 +226,18 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 	if (!irqen)
 		lvtt_value |= APIC_LVT_MASKED;
 
-	apic_write_around(APIC_LVTT, lvtt_value);
+	apic_write(APIC_LVTT, lvtt_value);
 
 	/*
 	 * Divide PICLK by 16
 	 */
 	tmp_value = apic_read(APIC_TDCR);
-	apic_write_around(APIC_TDCR, (tmp_value
-				& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
-				| APIC_TDR_DIV_16);
+	apic_write(APIC_TDCR,
+		   (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+		   APIC_TDR_DIV_16);
 
 	if (!oneshot)
-		apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
+		apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
 }
 
 /*
@@ -238,7 +246,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 static int lapic_next_event(unsigned long delta,
 			    struct clock_event_device *evt)
 {
-	apic_write_around(APIC_TMICT, delta);
+	apic_write(APIC_TMICT, delta);
 	return 0;
 }
 
@@ -267,7 +275,7 @@ static void lapic_timer_setup(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		v = apic_read(APIC_LVTT);
 		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-		apic_write_around(APIC_LVTT, v);
+		apic_write(APIC_LVTT, v);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		/* Nothing to do here */
@@ -361,12 +369,7 @@ static void __init lapic_cal_handler(struct clock_event_device *dev)
 	}
 }
 
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
+static int __init calibrate_APIC_clock(void)
 {
 	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
 	const long pm_100ms = PMTMR_TICKS_PER_SEC/10;
@@ -376,24 +379,6 @@ void __init setup_boot_APIC_clock(void)
 	long delta, deltapm;
 	int pm_referenced = 0;
 
-	/*
-	 * The local apic timer can be disabled via the kernel
-	 * commandline or from the CPU detection code. Register the lapic
-	 * timer as a dummy clock event source on SMP systems, so the
-	 * broadcast mechanism is used. On UP systems simply ignore it.
-	 */
-	if (local_apic_timer_disabled) {
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1) {
-			lapic_clockevent.mult = 1;
-			setup_APIC_timer();
-		}
-		return;
-	}
-
-	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
-		    "calibrating APIC timer ...\n");
-
 	local_irq_disable();
 
 	/* Replace the global interrupt handler */
@@ -478,8 +463,6 @@ void __init setup_boot_APIC_clock(void)
 		    calibration_result / (1000000 / HZ),
 		    calibration_result % (1000000 / HZ));
 
-	local_apic_timer_verify_ok = 1;
-
 	/*
 	 * Do a sanity check on the APIC calibration result
 	 */
@@ -487,12 +470,11 @@ void __init setup_boot_APIC_clock(void)
 		local_irq_enable();
 		printk(KERN_WARNING
 		       "APIC frequency too slow, disabling apic timer\n");
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1)
-			setup_APIC_timer();
-		return;
+		return -1;
 	}
 
+	local_apic_timer_verify_ok = 1;
+
 	/* We trust the pm timer based calibration */
 	if (!pm_referenced) {
 		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
@@ -532,22 +514,55 @@ void __init setup_boot_APIC_clock(void)
 	if (!local_apic_timer_verify_ok) {
 		printk(KERN_WARNING
 		       "APIC timer disabled due to verification failure.\n");
+			return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Setup the boot APIC
+ *
+ * Calibrate and verify the result.
+ */
+void __init setup_boot_APIC_clock(void)
+{
+	/*
+	 * The local apic timer can be disabled via the kernel
+	 * commandline or from the CPU detection code. Register the lapic
+	 * timer as a dummy clock event source on SMP systems, so the
+	 * broadcast mechanism is used. On UP systems simply ignore it.
+	 */
+	if (local_apic_timer_disabled) {
 		/* No broadcast on UP ! */
-		if (num_possible_cpus() == 1)
-			return;
-	} else {
-		/*
-		 * If nmi_watchdog is set to IO_APIC, we need the
-		 * PIT/HPET going.  Otherwise register lapic as a dummy
-		 * device.
-		 */
-		if (nmi_watchdog != NMI_IO_APIC)
-			lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-		else
-			printk(KERN_WARNING "APIC timer registered as dummy,"
-			       " due to nmi_watchdog=1!\n");
+		if (num_possible_cpus() > 1) {
+			lapic_clockevent.mult = 1;
+			setup_APIC_timer();
+		}
+		return;
+	}
+
+	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
+		    "calibrating APIC timer ...\n");
+
+	if (calibrate_APIC_clock()) {
+		/* No broadcast on UP ! */
+		if (num_possible_cpus() > 1)
+			setup_APIC_timer();
+		return;
 	}
 
+	/*
+	 * If nmi_watchdog is set to IO_APIC, we need the
+	 * PIT/HPET going.  Otherwise register lapic as a dummy
+	 * device.
+	 */
+	if (nmi_watchdog != NMI_IO_APIC)
+		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+	else
+		printk(KERN_WARNING "APIC timer registered as dummy,"
+			" due to nmi_watchdog=%d!\n", nmi_watchdog);
+
 	/* Setup the lapic or request the broadcast */
 	setup_APIC_timer();
 }
@@ -682,44 +697,44 @@ void clear_local_APIC(void)
 	 */
 	if (maxlvt >= 3) {
 		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
-		apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
+		apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
 	}
 	/*
 	 * Careful: we have to set masks only first to deassert
 	 * any level-triggered sources.
 	 */
 	v = apic_read(APIC_LVTT);
-	apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
 	v = apic_read(APIC_LVT0);
-	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
 	v = apic_read(APIC_LVT1);
-	apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
 	if (maxlvt >= 4) {
 		v = apic_read(APIC_LVTPC);
-		apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
+		apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
 	}
 
 	/* lets not touch this if we didn't frob it */
 #ifdef CONFIG_X86_MCE_P4THERMAL
 	if (maxlvt >= 5) {
 		v = apic_read(APIC_LVTTHMR);
-		apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
 	}
 #endif
 	/*
 	 * Clean APIC state for other OSs:
 	 */
-	apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
-	apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
+	apic_write(APIC_LVTT, APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED);
+	apic_write(APIC_LVT1, APIC_LVT_MASKED);
 	if (maxlvt >= 3)
-		apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
+		apic_write(APIC_LVTERR, APIC_LVT_MASKED);
 	if (maxlvt >= 4)
-		apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
+		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
 
 #ifdef CONFIG_X86_MCE_P4THERMAL
 	if (maxlvt >= 5)
-		apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
+		apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
 #endif
 	/* Integrated APIC (!82489DX) ? */
 	if (lapic_is_integrated()) {
@@ -745,7 +760,7 @@ void disable_local_APIC(void)
 	 */
 	value = apic_read(APIC_SPIV);
 	value &= ~APIC_SPIV_APIC_ENABLED;
-	apic_write_around(APIC_SPIV, value);
+	apic_write(APIC_SPIV, value);
 
 	/*
 	 * When LAPIC was disabled by the BIOS and enabled by the kernel,
@@ -854,8 +869,8 @@ void __init sync_Arb_IDs(void)
 	apic_wait_icr_idle();
 
 	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
-	apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
-				| APIC_DM_INIT);
+	apic_write(APIC_ICR,
+		   APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
 }
 
 /*
@@ -891,16 +906,16 @@ void __init init_bsp_APIC(void)
 	else
 		value |= APIC_SPIV_FOCUS_DISABLED;
 	value |= SPURIOUS_APIC_VECTOR;
-	apic_write_around(APIC_SPIV, value);
+	apic_write(APIC_SPIV, value);
 
 	/*
 	 * Set up the virtual wire mode.
 	 */
-	apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
 	value = APIC_DM_NMI;
 	if (!lapic_is_integrated())		/* 82489DX */
 		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write_around(APIC_LVT1, value);
+	apic_write(APIC_LVT1, value);
 }
 
 static void __cpuinit lapic_setup_esr(void)
@@ -915,7 +930,7 @@ static void __cpuinit lapic_setup_esr(void)
 
 		/* enables sending errors */
 		value = ERROR_APIC_VECTOR;
-		apic_write_around(APIC_LVTERR, value);
+		apic_write(APIC_LVTERR, value);
 		/*
 		 * spec says clear errors after enabling vector.
 		 */
@@ -963,7 +978,7 @@ void __cpuinit setup_local_APIC(void)
 	 * Double-check whether this APIC is really registered.
 	 */
 	if (!apic_id_registered())
-		BUG();
+		WARN_ON_ONCE(1);
 
 	/*
 	 * Intel recommends to set DFR, LDR and TPR before enabling
@@ -978,7 +993,7 @@ void __cpuinit setup_local_APIC(void)
 	 */
 	value = apic_read(APIC_TASKPRI);
 	value &= ~APIC_TPRI_MASK;
-	apic_write_around(APIC_TASKPRI, value);
+	apic_write(APIC_TASKPRI, value);
 
 	/*
 	 * After a crash, we no longer service the interrupts and a pending
@@ -1036,7 +1051,7 @@ void __cpuinit setup_local_APIC(void)
 	 * Set spurious IRQ vector
 	 */
 	value |= SPURIOUS_APIC_VECTOR;
-	apic_write_around(APIC_SPIV, value);
+	apic_write(APIC_SPIV, value);
 
 	/*
 	 * Set up LVT0, LVT1:
@@ -1058,7 +1073,7 @@ void __cpuinit setup_local_APIC(void)
 		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
 				smp_processor_id());
 	}
-	apic_write_around(APIC_LVT0, value);
+	apic_write(APIC_LVT0, value);
 
 	/*
 	 * only the BP should see the LINT1 NMI signal, obviously.
@@ -1069,7 +1084,7 @@ void __cpuinit setup_local_APIC(void)
 		value = APIC_DM_NMI | APIC_LVT_MASKED;
 	if (!integrated)		/* 82489DX */
 		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write_around(APIC_LVT1, value);
+	apic_write(APIC_LVT1, value);
 }
 
 void __cpuinit end_local_APIC_setup(void)
@@ -1080,7 +1095,7 @@ void __cpuinit end_local_APIC_setup(void)
 	/* Disable the local apic timer */
 	value = apic_read(APIC_LVTT);
 	value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-	apic_write_around(APIC_LVTT, value);
+	apic_write(APIC_LVTT, value);
 
 	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
@@ -1094,7 +1109,7 @@ static int __init detect_init_APIC(void)
 	u32 h, l, features;
 
 	/* Disabled by kernel option? */
-	if (enable_local_apic < 0)
+	if (disable_apic)
 		return -1;
 
 	switch (boot_cpu_data.x86_vendor) {
@@ -1117,7 +1132,7 @@ static int __init detect_init_APIC(void)
 		 * Over-ride BIOS and try to enable the local APIC only if
 		 * "lapic" specified.
 		 */
-		if (enable_local_apic <= 0) {
+		if (!force_enable_local_apic) {
 			printk(KERN_INFO "Local APIC disabled by BIOS -- "
 			       "you can enable it with \"lapic\"\n");
 			return -1;
@@ -1154,9 +1169,6 @@ static int __init detect_init_APIC(void)
 	if (l & MSR_IA32_APICBASE_ENABLE)
 		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
 
-	if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED)
-		nmi_watchdog = NMI_LOCAL_APIC;
-
 	printk(KERN_INFO "Found and enabled local APIC!\n");
 
 	apic_pm_activate();
@@ -1195,36 +1207,6 @@ void __init init_apic_mappings(void)
 	if (boot_cpu_physical_apicid == -1U)
 		boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
 
-#ifdef CONFIG_X86_IO_APIC
-	{
-		unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
-		int i;
-
-		for (i = 0; i < nr_ioapics; i++) {
-			if (smp_found_config) {
-				ioapic_phys = mp_ioapics[i].mpc_apicaddr;
-				if (!ioapic_phys) {
-					printk(KERN_ERR
-					       "WARNING: bogus zero IO-APIC "
-					       "address found in MPTABLE, "
-					       "disabling IO/APIC support!\n");
-					smp_found_config = 0;
-					skip_ioapic_setup = 1;
-					goto fake_ioapic_page;
-				}
-			} else {
-fake_ioapic_page:
-				ioapic_phys = (unsigned long)
-					      alloc_bootmem_pages(PAGE_SIZE);
-				ioapic_phys = __pa(ioapic_phys);
-			}
-			set_fixmap_nocache(idx, ioapic_phys);
-			printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
-			       __fix_to_virt(idx), ioapic_phys);
-			idx++;
-		}
-	}
-#endif
 }
 
 /*
@@ -1236,9 +1218,6 @@ int apic_version[MAX_APICS];
 
 int __init APIC_init_uniprocessor(void)
 {
-	if (enable_local_apic < 0)
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-
 	if (!smp_found_config && !cpu_has_apic)
 		return -1;
 
@@ -1265,10 +1244,14 @@ int __init APIC_init_uniprocessor(void)
 #ifdef CONFIG_CRASH_DUMP
 	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
 #endif
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 
 	setup_local_APIC();
 
+#ifdef CONFIG_X86_IO_APIC
+	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
+#endif
+		localise_nmi_watchdog();
 	end_local_APIC_setup();
 #ifdef CONFIG_X86_IO_APIC
 	if (smp_found_config)
@@ -1351,13 +1334,17 @@ void __init smp_intr_init(void)
 	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
 	 * IPI, driven by wakeup.
 	 */
-	set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
 
 	/* IPI for invalidation */
-	set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
 
 	/* IPI for generic function call */
-	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+	/* IPI for single call function */
+	set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
+				call_function_single_interrupt);
 }
 #endif
 
@@ -1370,15 +1357,15 @@ void __init apic_intr_init(void)
 	smp_intr_init();
 #endif
 	/* self generated IPI for local APIC timer */
-	set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
 
 	/* IPI vectors for APIC spurious and error interrupts */
-	set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-	set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
 
 	/* thermal monitor LVT interrupt */
 #ifdef CONFIG_X86_MCE_P4THERMAL
-	set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 #endif
 }
 
@@ -1433,7 +1420,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 		value &= ~APIC_VECTOR_MASK;
 		value |= APIC_SPIV_APIC_ENABLED;
 		value |= 0xf;
-		apic_write_around(APIC_SPIV, value);
+		apic_write(APIC_SPIV, value);
 
 		if (!virt_wire_setup) {
 			/*
@@ -1446,10 +1433,10 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 				APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
 			value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
 			value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
-			apic_write_around(APIC_LVT0, value);
+			apic_write(APIC_LVT0, value);
 		} else {
 			/* Disable LVT0 */
-			apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
+			apic_write(APIC_LVT0, APIC_LVT_MASKED);
 		}
 
 		/*
@@ -1463,7 +1450,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
 		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
 		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
-		apic_write_around(APIC_LVT1, value);
+		apic_write(APIC_LVT1, value);
 	}
 }
 
@@ -1513,6 +1500,9 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		 */
 		cpu = 0;
 
+	if (apicid > max_physical_apicid)
+		max_physical_apicid = apicid;
+
 	/*
 	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
 	 * but we need to work other dependencies like SMP_SUSPEND etc
@@ -1520,7 +1510,7 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
 	 *       - Ashok Raj <ashok.raj@intel.com>
 	 */
-	if (num_processors > 8) {
+	if (max_physical_apicid >= 8) {
 		switch (boot_cpu_data.x86_vendor) {
 		case X86_VENDOR_INTEL:
 			if (!APIC_XAPIC(version)) {
@@ -1534,9 +1524,9 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	}
 #ifdef CONFIG_SMP
 	/* are we being called early in kernel startup? */
-	if (x86_cpu_to_apicid_early_ptr) {
-		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
-		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
+		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
+		u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
 
 		cpu_to_apicid[cpu] = apicid;
 		bios_cpu_apicid[cpu] = apicid;
@@ -1703,15 +1693,15 @@ static void apic_pm_activate(void) { }
  */
 static int __init parse_lapic(char *arg)
 {
-	enable_local_apic = 1;
+	force_enable_local_apic = 1;
 	return 0;
 }
 early_param("lapic", parse_lapic);
 
 static int __init parse_nolapic(char *arg)
 {
-	enable_local_apic = -1;
-	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	disable_apic = 1;
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
 	return 0;
 }
 early_param("nolapic", parse_nolapic);
@@ -1740,3 +1730,21 @@ static int __init apic_set_verbosity(char *str)
 }
 __setup("apic=", apic_set_verbosity);
 
+static int __init lapic_insert_resource(void)
+{
+	if (!apic_phys)
+		return -1;
+
+	/* Put local APIC into the resource map. */
+	lapic_resource.start = apic_phys;
+	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+	insert_resource(&iomem_resource, &lapic_resource);
+
+	return 0;
+}
+
+/*
+ * need call insert after e820_reserve_resources()
+ * that is using request_resource
+ */
+late_initcall(lapic_insert_resource);
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 0633cfd0dc29..7f1f030da7ee 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -43,7 +43,7 @@
 #include <mach_ipi.h>
 #include <mach_apic.h>
 
-int disable_apic_timer __cpuinitdata;
+static int disable_apic_timer __cpuinitdata;
 static int apic_calibrate_pmtmr __initdata;
 int disable_apic;
 
@@ -54,7 +54,10 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
 /*
  * Debug level, exported for io_apic.c
  */
-int apic_verbosity;
+unsigned int apic_verbosity;
+
+/* Have we found an MP table */
+int smp_found_config;
 
 static struct resource lapic_resource = {
 	.name = "Local APIC",
@@ -87,9 +90,6 @@ static unsigned long apic_phys;
 
 unsigned long mp_lapic_addr;
 
-DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
 unsigned int __cpuinitdata maxcpus = NR_CPUS;
 /*
  * Get the LAPIC version
@@ -314,7 +314,7 @@ static void setup_APIC_timer(void)
 
 #define TICK_COUNT 100000000
 
-static void __init calibrate_APIC_clock(void)
+static int __init calibrate_APIC_clock(void)
 {
 	unsigned apic, apic_start;
 	unsigned long tsc, tsc_start;
@@ -368,6 +368,17 @@ static void __init calibrate_APIC_clock(void)
 		clockevent_delta2ns(0xF, &lapic_clockevent);
 
 	calibration_result = result / HZ;
+
+	/*
+	 * Do a sanity check on the APIC calibration result
+	 */
+	if (calibration_result < (1000000 / HZ)) {
+		printk(KERN_WARNING
+			"APIC frequency too slow, disabling apic timer\n");
+		return -1;
+	}
+
+	return 0;
 }
 
 /*
@@ -394,14 +405,7 @@ void __init setup_boot_APIC_clock(void)
 	}
 
 	printk(KERN_INFO "Using local APIC timer interrupts.\n");
-	calibrate_APIC_clock();
-
-	/*
-	 * Do a sanity check on the APIC calibration result
-	 */
-	if (calibration_result < (1000000 / HZ)) {
-		printk(KERN_WARNING
-		       "APIC frequency too slow, disabling apic timer\n");
+	if (calibrate_APIC_clock()) {
 		/* No broadcast on UP ! */
 		if (num_possible_cpus() > 1)
 			setup_APIC_timer();
@@ -417,37 +421,13 @@ void __init setup_boot_APIC_clock(void)
 		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
 	else
 		printk(KERN_WARNING "APIC timer registered as dummy,"
-		       " due to nmi_watchdog=1!\n");
+			" due to nmi_watchdog=%d!\n", nmi_watchdog);
 
 	setup_APIC_timer();
 }
 
-/*
- * AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the
- * C1E flag only in the secondary CPU, so when we detect the wreckage
- * we already have enabled the boot CPU local apic timer. Check, if
- * disable_apic_timer is set and the DUMMY flag is cleared. If yes,
- * set the DUMMY flag again and force the broadcast mode in the
- * clockevents layer.
- */
-static void __cpuinit check_boot_apic_timer_broadcast(void)
-{
-	if (!disable_apic_timer ||
-	    (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY))
-		return;
-
-	printk(KERN_INFO "AMD C1E detected late. Force timer broadcast.\n");
-	lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY;
-
-	local_irq_enable();
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
-			   &boot_cpu_physical_apicid);
-	local_irq_disable();
-}
-
 void __cpuinit setup_secondary_APIC_clock(void)
 {
-	check_boot_apic_timer_broadcast();
 	setup_APIC_timer();
 }
 
@@ -850,7 +830,6 @@ static void __cpuinit lapic_setup_esr(void)
 void __cpuinit end_local_APIC_setup(void)
 {
 	lapic_setup_esr();
-	nmi_watchdog_default();
 	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
 }
@@ -875,7 +854,7 @@ static int __init detect_init_APIC(void)
 
 void __init early_init_lapic_mapping(void)
 {
-	unsigned long apic_phys;
+	unsigned long phys_addr;
 
 	/*
 	 * If no local APIC can be found then go out
@@ -884,11 +863,11 @@ void __init early_init_lapic_mapping(void)
 	if (!smp_found_config)
 		return;
 
-	apic_phys = mp_lapic_addr;
+	phys_addr = mp_lapic_addr;
 
-	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+	set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
 	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-				 APIC_BASE, apic_phys);
+		    APIC_BASE, phys_addr);
 
 	/*
 	 * Fetch the APIC ID of the BSP in case we have a
@@ -942,7 +921,9 @@ int __init APIC_init_uniprocessor(void)
 
 	verify_local_APIC();
 
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	connect_bsp_APIC();
+
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
 
 	setup_local_APIC();
@@ -954,6 +935,8 @@ int __init APIC_init_uniprocessor(void)
 	if (!skip_ioapic_setup && nr_ioapics)
 		enable_IO_APIC();
 
+	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
+		localise_nmi_watchdog();
 	end_local_APIC_setup();
 
 	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
@@ -1021,6 +1004,14 @@ asmlinkage void smp_error_interrupt(void)
 	irq_exit();
 }
 
+/**
+ *  * connect_bsp_APIC - attach the APIC to the interrupt system
+ *   */
+void __init connect_bsp_APIC(void)
+{
+	enable_apic_mode();
+}
+
 void disconnect_bsp_APIC(int virt_wire_setup)
 {
 	/* Go back to Virtual Wire compatibility mode */
@@ -1090,10 +1081,13 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		 */
 		cpu = 0;
 	}
+	if (apicid > max_physical_apicid)
+		max_physical_apicid = apicid;
+
 	/* are we being called early in kernel startup? */
-	if (x86_cpu_to_apicid_early_ptr) {
-		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
-		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
+		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
+		u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
 
 		cpu_to_apicid[cpu] = apicid;
 		bios_cpu_apicid[cpu] = apicid;
@@ -1269,7 +1263,7 @@ __cpuinit int apic_is_clustered_box(void)
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
 		return 0;
 
-	bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+	bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
 	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
 
 	for (i = 0; i < NR_CPUS; i++) {
@@ -1347,7 +1341,7 @@ early_param("apic", apic_set_verbosity);
 static __init int setup_disableapic(char *str)
 {
 	disable_apic = 1;
-	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
 	return 0;
 }
 early_param("disableapic", setup_disableapic);
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index bf9290e29013..9ee24e6bc4b0 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -204,6 +204,7 @@
 #include <linux/module.h>
 
 #include <linux/poll.h>
+#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/timer.h>
@@ -218,7 +219,6 @@
 #include <linux/time.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/capability.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -228,6 +228,7 @@
 #include <linux/suspend.h>
 #include <linux/kthread.h>
 #include <linux/jiffies.h>
+#include <linux/smp_lock.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -1149,7 +1150,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender)
 				as->event_tail = 0;
 		}
 		as->events[as->event_head] = event;
-		if ((!as->suser) || (!as->writer))
+		if (!as->suser || !as->writer)
 			continue;
 		switch (event) {
 		case APM_SYS_SUSPEND:
@@ -1211,9 +1212,9 @@ static int suspend(int vetoable)
 	if (err != APM_SUCCESS)
 		apm_error("suspend", err);
 	err = (err == APM_SUCCESS) ? 0 : -EIO;
-	device_power_up();
+	device_power_up(PMSG_RESUME);
 	local_irq_enable();
-	device_resume();
+	device_resume(PMSG_RESUME);
 	queue_event(APM_NORMAL_RESUME, NULL);
 	spin_lock(&user_list_lock);
 	for (as = user_list; as != NULL; as = as->next) {
@@ -1238,7 +1239,7 @@ static void standby(void)
 		apm_error("standby", err);
 
 	local_irq_disable();
-	device_power_up();
+	device_power_up(PMSG_RESUME);
 	local_irq_enable();
 }
 
@@ -1324,7 +1325,7 @@ static void check_events(void)
 			ignore_bounce = 1;
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
-				device_resume();
+				device_resume(PMSG_RESUME);
 				queue_event(event, NULL);
 			}
 			ignore_normal_resume = 0;
@@ -1396,7 +1397,7 @@ static void apm_mainloop(void)
 
 static int check_apm_user(struct apm_user *as, const char *func)
 {
-	if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) {
+	if (as == NULL || as->magic != APM_BIOS_MAGIC) {
 		printk(KERN_ERR "apm: %s passed bad filp\n", func);
 		return 1;
 	}
@@ -1459,18 +1460,19 @@ static unsigned int do_poll(struct file *fp, poll_table *wait)
 	return 0;
 }
 
-static int do_ioctl(struct inode *inode, struct file *filp,
-		    u_int cmd, u_long arg)
+static long do_ioctl(struct file *filp, u_int cmd, u_long arg)
 {
 	struct apm_user *as;
+	int ret;
 
 	as = filp->private_data;
 	if (check_apm_user(as, "ioctl"))
 		return -EIO;
-	if ((!as->suser) || (!as->writer))
+	if (!as->suser || !as->writer)
 		return -EPERM;
 	switch (cmd) {
 	case APM_IOC_STANDBY:
+		lock_kernel();
 		if (as->standbys_read > 0) {
 			as->standbys_read--;
 			as->standbys_pending--;
@@ -1479,8 +1481,10 @@ static int do_ioctl(struct inode *inode, struct file *filp,
 			queue_event(APM_USER_STANDBY, as);
 		if (standbys_pending <= 0)
 			standby();
+		unlock_kernel();
 		break;
 	case APM_IOC_SUSPEND:
+		lock_kernel();
 		if (as->suspends_read > 0) {
 			as->suspends_read--;
 			as->suspends_pending--;
@@ -1488,16 +1492,17 @@ static int do_ioctl(struct inode *inode, struct file *filp,
 		} else
 			queue_event(APM_USER_SUSPEND, as);
 		if (suspends_pending <= 0) {
-			return suspend(1);
+			ret = suspend(1);
 		} else {
 			as->suspend_wait = 1;
 			wait_event_interruptible(apm_suspend_waitqueue,
 					as->suspend_wait == 0);
-			return as->suspend_result;
+			ret = as->suspend_result;
 		}
-		break;
+		unlock_kernel();
+		return ret;
 	default:
-		return -EINVAL;
+		return -ENOTTY;
 	}
 	return 0;
 }
@@ -1544,10 +1549,12 @@ static int do_open(struct inode *inode, struct file *filp)
 {
 	struct apm_user *as;
 
+	lock_kernel();
 	as = kmalloc(sizeof(*as), GFP_KERNEL);
 	if (as == NULL) {
 		printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
 		       sizeof(*as));
+		       unlock_kernel();
 		return -ENOMEM;
 	}
 	as->magic = APM_BIOS_MAGIC;
@@ -1569,6 +1576,7 @@ static int do_open(struct inode *inode, struct file *filp)
 	user_list = as;
 	spin_unlock(&user_list_lock);
 	filp->private_data = as;
+	unlock_kernel();
 	return 0;
 }
 
@@ -1860,7 +1868,7 @@ static const struct file_operations apm_bios_fops = {
 	.owner		= THIS_MODULE,
 	.read		= do_read,
 	.poll		= do_poll,
-	.ioctl		= do_ioctl,
+	.unlocked_ioctl	= do_ioctl,
 	.open		= do_open,
 	.release	= do_release,
 };
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 92588083950f..6649d09ad88f 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -111,7 +111,7 @@ void foo(void)
 	OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
 	OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
 	OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
-	OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret);
+	OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
 	OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0);
 #endif
 
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index f126c05d6170..aa89387006fe 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -18,6 +18,8 @@
 #include <asm/ia32.h>
 #include <asm/bootparam.h>
 
+#include <xen/interface/xen.h>
+
 #define __NO_STUBS 1
 #undef __SYSCALL
 #undef _ASM_X86_64_UNISTD_H_
@@ -34,7 +36,7 @@ int main(void)
 	ENTRY(pid);
 	BLANK();
 #undef ENTRY
-#define ENTRY(entry) DEFINE(threadinfo_ ## entry, offsetof(struct thread_info, entry))
+#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry))
 	ENTRY(flags);
 	ENTRY(addr_limit);
 	ENTRY(preempt_count);
@@ -61,8 +63,11 @@ int main(void)
 	OFFSET(PARAVIRT_PATCH_pv_irq_ops, paravirt_patch_template, pv_irq_ops);
 	OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
 	OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
+	OFFSET(PV_IRQ_adjust_exception_frame, pv_irq_ops, adjust_exception_frame);
 	OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
-	OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret);
+	OFFSET(PV_CPU_usergs_sysret32, pv_cpu_ops, usergs_sysret32);
+	OFFSET(PV_CPU_usergs_sysret64, pv_cpu_ops, usergs_sysret64);
+	OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
 	OFFSET(PV_CPU_swapgs, pv_cpu_ops, swapgs);
 	OFFSET(PV_MMU_read_cr2, pv_mmu_ops, read_cr2);
 #endif
@@ -128,5 +133,14 @@ int main(void)
 	OFFSET(BP_loadflags, boot_params, hdr.loadflags);
 	OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
 	OFFSET(BP_version, boot_params, hdr.version);
+
+	BLANK();
+	DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+#ifdef CONFIG_XEN
+	BLANK();
+	OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask);
+	OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
+#undef ENTRY
+#endif
 	return 0;
 }
diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c
new file mode 100644
index 000000000000..c639bd55391c
--- /dev/null
+++ b/arch/x86/kernel/bios_uv.c
@@ -0,0 +1,48 @@
+/*
+ * BIOS run time interface routines.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <asm/uv/bios.h>
+
+const char *
+x86_bios_strerror(long status)
+{
+	const char *str;
+	switch (status) {
+	case  0: str = "Call completed without error"; break;
+	case -1: str = "Not implemented"; break;
+	case -2: str = "Invalid argument"; break;
+	case -3: str = "Call completed with error"; break;
+	default: str = "Unknown BIOS status code"; break;
+	}
+	return str;
+}
+
+long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info)
+{
+	struct uv_bios_retval isrv;
+
+	BIOS_CALL(isrv, BIOS_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
+	*ticks_per_second = isrv.v0;
+	*drift_info = isrv.v1;
+	return isrv.status;
+}
+EXPORT_SYMBOL_GPL(x86_bios_freq_base);
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index a0c6f8190887..ee76eaad3001 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -6,11 +6,15 @@ obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
 obj-y			+= proc.o feature_names.o
 
 obj-$(CONFIG_X86_32)	+= common.o bugs.o
+obj-$(CONFIG_X86_64)	+= common_64.o bugs_64.o
 obj-$(CONFIG_X86_32)	+= amd.o
+obj-$(CONFIG_X86_64)	+= amd_64.o
 obj-$(CONFIG_X86_32)	+= cyrix.o
 obj-$(CONFIG_X86_32)	+= centaur.o
+obj-$(CONFIG_X86_64)	+= centaur_64.o
 obj-$(CONFIG_X86_32)	+= transmeta.o
 obj-$(CONFIG_X86_32)	+= intel.o
+obj-$(CONFIG_X86_64)	+= intel_64.o
 obj-$(CONFIG_X86_32)	+= umc.o
 
 obj-$(CONFIG_X86_MCE)	+= mcheck/
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index c2e1ce33c7cb..84a8220a6072 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -1,9 +1,7 @@
-
 /*
  *	Routines to indentify additional cpu features that are scattered in
  *	cpuid space.
  */
-
 #include <linux/cpu.h>
 
 #include <asm/pat.h>
@@ -53,19 +51,20 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 #ifdef CONFIG_X86_PAT
 void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
 {
+	if (!cpu_has_pat)
+		pat_disable("PAT not supported by CPU.");
+
 	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		if (c->x86 >= 0xf && c->x86 <= 0x11)
-			return;
-		break;
 	case X86_VENDOR_INTEL:
 		if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
 			return;
 		break;
+	case X86_VENDOR_AMD:
+	case X86_VENDOR_CENTAUR:
+	case X86_VENDOR_TRANSMETA:
+		return;
 	}
 
-	pat_disable(cpu_has_pat ?
-		    "PAT disabled. Not yet verified on this CPU type." :
-		    "PAT not supported by CPU.");
+	pat_disable("PAT disabled. Not yet verified on this CPU type.");
 }
 #endif
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 245866828294..cae9cabc3031 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -24,45 +24,6 @@
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
-#ifdef CONFIG_X86_LOCAL_APIC
-#define ENABLE_C1E_MASK         0x18000000
-#define CPUID_PROCESSOR_SIGNATURE       1
-#define CPUID_XFAM              0x0ff00000
-#define CPUID_XFAM_K8           0x00000000
-#define CPUID_XFAM_10H          0x00100000
-#define CPUID_XFAM_11H          0x00200000
-#define CPUID_XMOD              0x000f0000
-#define CPUID_XMOD_REV_F        0x00040000
-
-/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
-static __cpuinit int amd_apic_timer_broken(void)
-{
-	u32 lo, hi;
-	u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-	switch (eax & CPUID_XFAM) {
-	case CPUID_XFAM_K8:
-		if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
-			break;
-	case CPUID_XFAM_10H:
-	case CPUID_XFAM_11H:
-		rdmsr(MSR_K8_ENABLE_C1E, lo, hi);
-		if (lo & ENABLE_C1E_MASK) {
-			if (smp_processor_id() != boot_cpu_physical_apicid)
-				printk(KERN_INFO "AMD C1E detected late. "
-				       "	Force timer broadcast.\n");
-			return 1;
-		}
-		break;
-	default:
-		/* err on the side of caution */
-		return 1;
-	}
-	return 0;
-}
-#endif
-
-int force_mwait __cpuinitdata;
-
 static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 {
 	if (cpuid_eax(0x80000000) >= 0x80000007) {
@@ -297,11 +258,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 			num_cache_leaves = 3;
 	}
 
-#ifdef CONFIG_X86_LOCAL_APIC
-	if (amd_apic_timer_broken())
-		local_apic_timer_disabled = 1;
-#endif
-
 	/* K6s reports MCEs but don't actually have all the MSRs */
 	if (c->x86 < 6)
 		clear_cpu_cap(c, X86_FEATURE_MCE);
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
new file mode 100644
index 000000000000..d1692b2a41ff
--- /dev/null
+++ b/arch/x86/kernel/cpu/amd_64.c
@@ -0,0 +1,224 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/numa_64.h>
+#include <asm/mmconfig.h>
+#include <asm/cacheflush.h>
+
+#include <mach_apic.h>
+
+#include "cpu.h"
+
+int force_mwait __cpuinitdata;
+
+#ifdef CONFIG_NUMA
+static int __cpuinit nearby_node(int apicid)
+{
+	int i, node;
+
+	for (i = apicid - 1; i >= 0; i--) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	return first_node(node_online_map); /* Shouldn't happen */
+}
+#endif
+
+/*
+ * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
+ * Assumes number of cores is a power of two.
+ */
+static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	unsigned bits;
+#ifdef CONFIG_NUMA
+	int cpu = smp_processor_id();
+	int node = 0;
+	unsigned apicid = hard_smp_processor_id();
+#endif
+	bits = c->x86_coreid_bits;
+
+	/* Low order bits define the core id (index of core in socket) */
+	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
+	/* Convert the initial APIC ID into the socket ID */
+	c->phys_proc_id = c->initial_apicid >> bits;
+
+#ifdef CONFIG_NUMA
+	node = c->phys_proc_id;
+	if (apicid_to_node[apicid] != NUMA_NO_NODE)
+		node = apicid_to_node[apicid];
+	if (!node_online(node)) {
+		/* Two possibilities here:
+		   - The CPU is missing memory and no node was created.
+		   In that case try picking one from a nearby CPU
+		   - The APIC IDs differ from the HyperTransport node IDs
+		   which the K8 northbridge parsing fills in.
+		   Assume they are all increased by a constant offset,
+		   but in the same order as the HT nodeids.
+		   If that doesn't result in a usable node fall back to the
+		   path for the previous case.  */
+
+		int ht_nodeid = c->initial_apicid;
+
+		if (ht_nodeid >= 0 &&
+		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+			node = apicid_to_node[ht_nodeid];
+		/* Pick a nearby node */
+		if (!node_online(node))
+			node = nearby_node(apicid);
+	}
+	numa_set_node(cpu, node);
+
+	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+#endif
+#endif
+}
+
+static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	unsigned bits, ecx;
+
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level < 0x80000008)
+		return;
+
+	ecx = cpuid_ecx(0x80000008);
+
+	c->x86_max_cores = (ecx & 0xff) + 1;
+
+	/* CPU telling us the core id bits shift? */
+	bits = (ecx >> 12) & 0xF;
+
+	/* Otherwise recompute */
+	if (bits == 0) {
+		while ((1 << bits) < c->x86_max_cores)
+			bits++;
+	}
+
+	c->x86_coreid_bits = bits;
+
+#endif
+}
+
+static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+{
+	early_init_amd_mc(c);
+
+	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
+	if (c->x86_power & (1<<8))
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
+}
+
+static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+{
+	unsigned level;
+
+#ifdef CONFIG_SMP
+	unsigned long value;
+
+	/*
+	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
+	 * bit 6 of msr C001_0015
+	 *
+	 * Errata 63 for SH-B3 steppings
+	 * Errata 122 for all steppings (F+ have it disabled by default)
+	 */
+	if (c->x86 == 0xf) {
+		rdmsrl(MSR_K8_HWCR, value);
+		value |= 1 << 6;
+		wrmsrl(MSR_K8_HWCR, value);
+	}
+#endif
+
+	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+	clear_cpu_cap(c, 0*32+31);
+
+	/* On C+ stepping K8 rep microcode works well for copy/memset */
+	if (c->x86 == 0xf) {
+		level = cpuid_eax(1);
+		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+	}
+	if (c->x86 == 0x10 || c->x86 == 0x11)
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+	/* Enable workaround for FXSAVE leak */
+	if (c->x86 >= 6)
+		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
+
+	level = get_model_name(c);
+	if (!level) {
+		switch (c->x86) {
+		case 0xf:
+			/* Should distinguish Models here, but this is only
+			   a fallback anyways. */
+			strcpy(c->x86_model_id, "Hammer");
+			break;
+		}
+	}
+	display_cacheinfo(c);
+
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level >= 0x80000008)
+		amd_detect_cmp(c);
+
+	if (c->extended_cpuid_level >= 0x80000006 &&
+		(cpuid_edx(0x80000006) & 0xf000))
+		num_cache_leaves = 4;
+	else
+		num_cache_leaves = 3;
+
+	if (c->x86 >= 0xf && c->x86 <= 0x11)
+		set_cpu_cap(c, X86_FEATURE_K8);
+
+	/* MFENCE stops RDTSC speculation */
+	set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
+
+	if (c->x86 == 0x10) {
+		/* do this for boot cpu */
+		if (c == &boot_cpu_data)
+			check_enable_amd_mmconf_dmi();
+
+		fam10h_check_enable_mmcfg();
+	}
+
+	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+		unsigned long long tseg;
+
+		/*
+		 * Split up direct mapping around the TSEG SMM area.
+		 * Don't do it for gbpages because there seems very little
+		 * benefit in doing so.
+		 */
+		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
+		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+		    if ((tseg>>PMD_SHIFT) <
+				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
+			((tseg>>PMD_SHIFT) <
+				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
+			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+			set_memory_4k((unsigned long)__va(tseg), 1);
+		}
+	}
+}
+
+static struct cpu_dev amd_cpu_dev __cpuinitdata = {
+	.c_vendor	= "AMD",
+	.c_ident	= { "AuthenticAMD" },
+	.c_early_init   = early_init_amd,
+	.c_init		= init_amd,
+};
+
+cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
+
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 170d2f5523b2..c9b58a806e85 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -59,8 +59,12 @@ static void __init check_fpu(void)
 		return;
 	}
 
-/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */
-	/* Test for the divl bug.. */
+	/*
+	 * trap_init() enabled FXSR and company _before_ testing for FP
+	 * problems here.
+	 *
+	 * Test for the divl bug..
+	 */
 	__asm__("fninit\n\t"
 		"fldl %1\n\t"
 		"fdivl %2\n\t"
@@ -108,10 +112,15 @@ static void __init check_popad(void)
 	  "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx "
 	  : "=&a" (res)
 	  : "d" (inp)
-	  : "ecx", "edi" );
-	/* If this fails, it means that any user program may lock the CPU hard. Too bad. */
-	if (res != 12345678) printk( "Buggy.\n" );
-		        else printk( "OK.\n" );
+	  : "ecx", "edi");
+	/*
+	 * If this fails, it means that any user program may lock the
+	 * CPU hard. Too bad.
+	 */
+	if (res != 12345678)
+		printk("Buggy.\n");
+	else
+		printk("OK.\n");
 #endif
 }
 
@@ -122,13 +131,7 @@ static void __init check_popad(void)
  *   (for due to lack of "invlpg" and working WP on a i386)
  * - In order to run on anything without a TSC, we need to be
  *   compiled for a i486.
- * - In order to support the local APIC on a buggy Pentium machine,
- *   we need to be compiled with CONFIG_X86_GOOD_APIC disabled,
- *   which happens implicitly if compiled for a Pentium or lower
- *   (unless an advanced selection of CPU features is used) as an
- *   otherwise config implies a properly working local APIC without
- *   the need to do extra reads from the APIC.
-*/
+ */
 
 static void __init check_config(void)
 {
@@ -137,25 +140,11 @@ static void __init check_config(void)
  * i486+ only features! (WP works in supervisor mode and the
  * new "invlpg" and "bswap" instructions)
  */
-#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP)
+#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \
+	defined(CONFIG_X86_BSWAP)
 	if (boot_cpu_data.x86 == 3)
 		panic("Kernel requires i486+ for 'invlpg' and other features");
 #endif
-
-/*
- * If we were told we had a good local APIC, check for buggy Pentia,
- * i.e. all B steppings and the C2 stepping of P54C when using their
- * integrated APIC (see 11AP erratum in "Pentium Processor
- * Specification Update").
- */
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC)
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL
-	    && cpu_has_apic
-	    && boot_cpu_data.x86 == 5
-	    && boot_cpu_data.x86_model == 2
-	    && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11))
-		panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!");
-#endif
 }
 
 
@@ -170,6 +159,7 @@ void __init check_bugs(void)
 	check_fpu();
 	check_hlt();
 	check_popad();
-	init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
+	init_utsname()->machine[1] =
+		'0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
 	alternative_instructions();
 }
diff --git a/arch/x86/kernel/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c
index 9a3ed0649d4e..9a3ed0649d4e 100644
--- a/arch/x86/kernel/bugs_64.c
+++ b/arch/x86/kernel/cpu/bugs_64.c
diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c
new file mode 100644
index 000000000000..1d181c40e2e1
--- /dev/null
+++ b/arch/x86/kernel/cpu/centaur_64.c
@@ -0,0 +1,35 @@
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/cpufeature.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+	if (c->x86 == 0x6 && c->x86_model >= 0xf)
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
+}
+
+static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
+{
+	if (c->x86 == 0x6 && c->x86_model >= 0xf) {
+		c->x86_cache_alignment = c->x86_clflush_size * 2;
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+	}
+	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+}
+
+static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
+	.c_vendor	= "Centaur",
+	.c_ident	= { "CentaurHauls" },
+	.c_early_init	= early_init_centaur,
+	.c_init		= init_centaur,
+};
+
+cpu_vendor_dev_register(X86_VENDOR_CENTAUR, &centaur_cpu_dev);
+
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d0463a946247..80ab20d4fa39 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -427,7 +427,7 @@ __setup("serialnumber", x86_serial_nr_setup);
 /*
  * This does the hard work of actually picking apart the CPU stuff...
  */
-void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
+static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 {
 	int i;
 
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
new file mode 100644
index 000000000000..dd6e3f15017e
--- /dev/null
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -0,0 +1,670 @@
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/kgdb.h>
+#include <linux/topology.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/linkage.h>
+#include <asm/mmu_context.h>
+#include <asm/mtrr.h>
+#include <asm/mce.h>
+#include <asm/pat.h>
+#include <asm/numa.h>
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+#endif
+#include <asm/pda.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/proto.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/genapic.h>
+
+#include "cpu.h"
+
+/* We need valid kernel segments for data and code in long mode too
+ * IRET will check the segment types  kkeil 2000/10/28
+ * Also sysret mandates a special GDT layout
+ */
+/* The TLS descriptors are currently at a different place compared to i386.
+   Hopefully nobody expects them at a fixed place (Wine?) */
+DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
+	[GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
+	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
+	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
+	[GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
+	[GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
+	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
+} };
+EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
+
+__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+
+/* Current gdt points %fs at the "master" per-cpu area: after this,
+ * it's on the real one. */
+void switch_to_new_gdt(void)
+{
+	struct desc_ptr gdt_descr;
+
+	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
+	gdt_descr.size = GDT_SIZE - 1;
+	load_gdt(&gdt_descr);
+}
+
+struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
+
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
+{
+	display_cacheinfo(c);
+}
+
+static struct cpu_dev __cpuinitdata default_cpu = {
+	.c_init	= default_init,
+	.c_vendor = "Unknown",
+};
+static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
+
+int __cpuinit get_model_name(struct cpuinfo_x86 *c)
+{
+	unsigned int *v;
+
+	if (c->extended_cpuid_level < 0x80000004)
+		return 0;
+
+	v = (unsigned int *) c->x86_model_id;
+	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
+	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
+	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
+	c->x86_model_id[48] = 0;
+	return 1;
+}
+
+
+void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
+{
+	unsigned int n, dummy, ebx, ecx, edx;
+
+	n = c->extended_cpuid_level;
+
+	if (n >= 0x80000005) {
+		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
+		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
+		       "D cache %dK (%d bytes/line)\n",
+		       edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+		c->x86_cache_size = (ecx>>24) + (edx>>24);
+		/* On K8 L1 TLB is inclusive, so don't count it */
+		c->x86_tlbsize = 0;
+	}
+
+	if (n >= 0x80000006) {
+		cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
+		ecx = cpuid_ecx(0x80000006);
+		c->x86_cache_size = ecx >> 16;
+		c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
+
+		printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
+		c->x86_cache_size, ecx & 0xFF);
+	}
+}
+
+void __cpuinit detect_ht(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	u32 eax, ebx, ecx, edx;
+	int index_msb, core_bits;
+
+	cpuid(1, &eax, &ebx, &ecx, &edx);
+
+
+	if (!cpu_has(c, X86_FEATURE_HT))
+		return;
+	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+		goto out;
+
+	smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+	if (smp_num_siblings == 1) {
+		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
+	} else if (smp_num_siblings > 1) {
+
+		if (smp_num_siblings > NR_CPUS) {
+			printk(KERN_WARNING "CPU: Unsupported number of "
+			       "siblings %d", smp_num_siblings);
+			smp_num_siblings = 1;
+			return;
+		}
+
+		index_msb = get_count_order(smp_num_siblings);
+		c->phys_proc_id = phys_pkg_id(index_msb);
+
+		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
+
+		index_msb = get_count_order(smp_num_siblings);
+
+		core_bits = get_count_order(c->x86_max_cores);
+
+		c->cpu_core_id = phys_pkg_id(index_msb) &
+					       ((1 << core_bits) - 1);
+	}
+out:
+	if ((c->x86_max_cores * smp_num_siblings) > 1) {
+		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+		       c->phys_proc_id);
+		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+		       c->cpu_core_id);
+	}
+
+#endif
+}
+
+static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
+{
+	char *v = c->x86_vendor_id;
+	int i;
+	static int printed;
+
+	for (i = 0; i < X86_VENDOR_NUM; i++) {
+		if (cpu_devs[i]) {
+			if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
+			    (cpu_devs[i]->c_ident[1] &&
+			    !strcmp(v, cpu_devs[i]->c_ident[1]))) {
+				c->x86_vendor = i;
+				this_cpu = cpu_devs[i];
+				return;
+			}
+		}
+	}
+	if (!printed) {
+		printed++;
+		printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
+		printk(KERN_ERR "CPU: Your system may be unstable.\n");
+	}
+	c->x86_vendor = X86_VENDOR_UNKNOWN;
+}
+
+static void __init early_cpu_support_print(void)
+{
+	int i,j;
+	struct cpu_dev *cpu_devx;
+
+	printk("KERNEL supported cpus:\n");
+	for (i = 0; i < X86_VENDOR_NUM; i++) {
+		cpu_devx = cpu_devs[i];
+		if (!cpu_devx)
+			continue;
+		for (j = 0; j < 2; j++) {
+			if (!cpu_devx->c_ident[j])
+				continue;
+			printk("  %s %s\n", cpu_devx->c_vendor,
+				cpu_devx->c_ident[j]);
+		}
+	}
+}
+
+static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
+
+void __init early_cpu_init(void)
+{
+        struct cpu_vendor_dev *cvdev;
+
+        for (cvdev = __x86cpuvendor_start ;
+             cvdev < __x86cpuvendor_end   ;
+             cvdev++)
+                cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
+	early_cpu_support_print();
+	early_identify_cpu(&boot_cpu_data);
+}
+
+/* Do some early cpuid on the boot CPU to get some parameter that are
+   needed before check_bugs. Everything advanced is in identify_cpu
+   below. */
+static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
+{
+	u32 tfms, xlvl;
+
+	c->loops_per_jiffy = loops_per_jiffy;
+	c->x86_cache_size = -1;
+	c->x86_vendor = X86_VENDOR_UNKNOWN;
+	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
+	c->x86_vendor_id[0] = '\0'; /* Unset */
+	c->x86_model_id[0] = '\0';  /* Unset */
+	c->x86_clflush_size = 64;
+	c->x86_cache_alignment = c->x86_clflush_size;
+	c->x86_max_cores = 1;
+	c->x86_coreid_bits = 0;
+	c->extended_cpuid_level = 0;
+	memset(&c->x86_capability, 0, sizeof c->x86_capability);
+
+	/* Get vendor name */
+	cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
+	      (unsigned int *)&c->x86_vendor_id[0],
+	      (unsigned int *)&c->x86_vendor_id[8],
+	      (unsigned int *)&c->x86_vendor_id[4]);
+
+	get_cpu_vendor(c);
+
+	/* Initialize the standard set of capabilities */
+	/* Note that the vendor-specific code below might override */
+
+	/* Intel-defined flags: level 0x00000001 */
+	if (c->cpuid_level >= 0x00000001) {
+		__u32 misc;
+		cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
+		      &c->x86_capability[0]);
+		c->x86 = (tfms >> 8) & 0xf;
+		c->x86_model = (tfms >> 4) & 0xf;
+		c->x86_mask = tfms & 0xf;
+		if (c->x86 == 0xf)
+			c->x86 += (tfms >> 20) & 0xff;
+		if (c->x86 >= 0x6)
+			c->x86_model += ((tfms >> 16) & 0xF) << 4;
+		if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
+			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
+	} else {
+		/* Have CPUID level 0 only - unheard of */
+		c->x86 = 4;
+	}
+
+	c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
+#ifdef CONFIG_SMP
+	c->phys_proc_id = c->initial_apicid;
+#endif
+	/* AMD-defined flags: level 0x80000001 */
+	xlvl = cpuid_eax(0x80000000);
+	c->extended_cpuid_level = xlvl;
+	if ((xlvl & 0xffff0000) == 0x80000000) {
+		if (xlvl >= 0x80000001) {
+			c->x86_capability[1] = cpuid_edx(0x80000001);
+			c->x86_capability[6] = cpuid_ecx(0x80000001);
+		}
+		if (xlvl >= 0x80000004)
+			get_model_name(c); /* Default name */
+	}
+
+	/* Transmeta-defined flags: level 0x80860001 */
+	xlvl = cpuid_eax(0x80860000);
+	if ((xlvl & 0xffff0000) == 0x80860000) {
+		/* Don't set x86_cpuid_level here for now to not confuse. */
+		if (xlvl >= 0x80860001)
+			c->x86_capability[2] = cpuid_edx(0x80860001);
+	}
+
+	if (c->extended_cpuid_level >= 0x80000007)
+		c->x86_power = cpuid_edx(0x80000007);
+
+	if (c->extended_cpuid_level >= 0x80000008) {
+		u32 eax = cpuid_eax(0x80000008);
+
+		c->x86_virt_bits = (eax >> 8) & 0xff;
+		c->x86_phys_bits = eax & 0xff;
+	}
+
+	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
+	    cpu_devs[c->x86_vendor]->c_early_init)
+		cpu_devs[c->x86_vendor]->c_early_init(c);
+
+	validate_pat_support(c);
+}
+
+/*
+ * This does the hard work of actually picking apart the CPU stuff...
+ */
+static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
+{
+	int i;
+
+	early_identify_cpu(c);
+
+	init_scattered_cpuid_features(c);
+
+	c->apicid = phys_pkg_id(0);
+
+	/*
+	 * Vendor-specific initialization.  In this section we
+	 * canonicalize the feature flags, meaning if there are
+	 * features a certain CPU supports which CPUID doesn't
+	 * tell us, CPUID claiming incorrect flags, or other bugs,
+	 * we handle them here.
+	 *
+	 * At the end of this section, c->x86_capability better
+	 * indicate the features this CPU genuinely supports!
+	 */
+	if (this_cpu->c_init)
+		this_cpu->c_init(c);
+
+	detect_ht(c);
+
+	/*
+	 * On SMP, boot_cpu_data holds the common feature set between
+	 * all CPUs; so make sure that we indicate which features are
+	 * common between the CPUs.  The first time this routine gets
+	 * executed, c == &boot_cpu_data.
+	 */
+	if (c != &boot_cpu_data) {
+		/* AND the already accumulated flags with these */
+		for (i = 0; i < NCAPINTS; i++)
+			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
+	}
+
+	/* Clear all flags overriden by options */
+	for (i = 0; i < NCAPINTS; i++)
+		c->x86_capability[i] &= ~cleared_cpu_caps[i];
+
+#ifdef CONFIG_X86_MCE
+	mcheck_init(c);
+#endif
+	select_idle_routine(c);
+
+#ifdef CONFIG_NUMA
+	numa_add_cpu(smp_processor_id());
+#endif
+
+}
+
+void __cpuinit identify_boot_cpu(void)
+{
+	identify_cpu(&boot_cpu_data);
+}
+
+void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
+{
+	BUG_ON(c == &boot_cpu_data);
+	identify_cpu(c);
+	mtrr_ap_init();
+}
+
+static __init int setup_noclflush(char *arg)
+{
+	setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
+	return 1;
+}
+__setup("noclflush", setup_noclflush);
+
+void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
+{
+	if (c->x86_model_id[0])
+		printk(KERN_CONT "%s", c->x86_model_id);
+
+	if (c->x86_mask || c->cpuid_level >= 0)
+		printk(KERN_CONT " stepping %02x\n", c->x86_mask);
+	else
+		printk(KERN_CONT "\n");
+}
+
+static __init int setup_disablecpuid(char *arg)
+{
+	int bit;
+	if (get_option(&arg, &bit) && bit < NCAPINTS*32)
+		setup_clear_cpu_cap(bit);
+	else
+		return 0;
+	return 1;
+}
+__setup("clearcpuid=", setup_disablecpuid);
+
+cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
+
+struct x8664_pda **_cpu_pda __read_mostly;
+EXPORT_SYMBOL(_cpu_pda);
+
+struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
+
+char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
+
+unsigned long __supported_pte_mask __read_mostly = ~0UL;
+EXPORT_SYMBOL_GPL(__supported_pte_mask);
+
+static int do_not_nx __cpuinitdata;
+
+/* noexec=on|off
+Control non executable mappings for 64bit processes.
+
+on	Enable(default)
+off	Disable
+*/
+static int __init nonx_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+	if (!strncmp(str, "on", 2)) {
+		__supported_pte_mask |= _PAGE_NX;
+		do_not_nx = 0;
+	} else if (!strncmp(str, "off", 3)) {
+		do_not_nx = 1;
+		__supported_pte_mask &= ~_PAGE_NX;
+	}
+	return 0;
+}
+early_param("noexec", nonx_setup);
+
+int force_personality32;
+
+/* noexec32=on|off
+Control non executable heap for 32bit processes.
+To control the stack too use noexec=off
+
+on	PROT_READ does not imply PROT_EXEC for 32bit processes (default)
+off	PROT_READ implies PROT_EXEC
+*/
+static int __init nonx32_setup(char *str)
+{
+	if (!strcmp(str, "on"))
+		force_personality32 &= ~READ_IMPLIES_EXEC;
+	else if (!strcmp(str, "off"))
+		force_personality32 |= READ_IMPLIES_EXEC;
+	return 1;
+}
+__setup("noexec32=", nonx32_setup);
+
+void pda_init(int cpu)
+{
+	struct x8664_pda *pda = cpu_pda(cpu);
+
+	/* Setup up data that may be needed in __get_free_pages early */
+	loadsegment(fs, 0);
+	loadsegment(gs, 0);
+	/* Memory clobbers used to order PDA accessed */
+	mb();
+	wrmsrl(MSR_GS_BASE, pda);
+	mb();
+
+	pda->cpunumber = cpu;
+	pda->irqcount = -1;
+	pda->kernelstack = (unsigned long)stack_thread_info() -
+				 PDA_STACKOFFSET + THREAD_SIZE;
+	pda->active_mm = &init_mm;
+	pda->mmu_state = 0;
+
+	if (cpu == 0) {
+		/* others are initialized in smpboot.c */
+		pda->pcurrent = &init_task;
+		pda->irqstackptr = boot_cpu_stack;
+	} else {
+		pda->irqstackptr = (char *)
+			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+		if (!pda->irqstackptr)
+			panic("cannot allocate irqstack for cpu %d", cpu);
+
+		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
+			pda->nodenumber = cpu_to_node(cpu);
+	}
+
+	pda->irqstackptr += IRQSTACKSIZE-64;
+}
+
+char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
+			   DEBUG_STKSZ] __page_aligned_bss;
+
+extern asmlinkage void ignore_sysret(void);
+
+/* May not be marked __init: used by software suspend */
+void syscall_init(void)
+{
+	/*
+	 * LSTAR and STAR live in a bit strange symbiosis.
+	 * They both write to the same internal register. STAR allows to
+	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
+	 */
+	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
+	wrmsrl(MSR_LSTAR, system_call);
+	wrmsrl(MSR_CSTAR, ignore_sysret);
+
+#ifdef CONFIG_IA32_EMULATION
+	syscall32_cpu_init();
+#endif
+
+	/* Flags to clear on syscall */
+	wrmsrl(MSR_SYSCALL_MASK,
+	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
+}
+
+void __cpuinit check_efer(void)
+{
+	unsigned long efer;
+
+	rdmsrl(MSR_EFER, efer);
+	if (!(efer & EFER_NX) || do_not_nx)
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+
+unsigned long kernel_eflags;
+
+/*
+ * Copies of the original ist values from the tss are only accessed during
+ * debugging, no special alignment required.
+ */
+DEFINE_PER_CPU(struct orig_ist, orig_ist);
+
+/*
+ * cpu_init() initializes state that is per-CPU. Some data is already
+ * initialized (naturally) in the bootstrap process, such as the GDT
+ * and IDT. We reload them nevertheless, this function acts as a
+ * 'CPU state barrier', nothing should get across.
+ * A lot of state is already set up in PDA init.
+ */
+void __cpuinit cpu_init(void)
+{
+	int cpu = stack_smp_processor_id();
+	struct tss_struct *t = &per_cpu(init_tss, cpu);
+	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
+	unsigned long v;
+	char *estacks = NULL;
+	struct task_struct *me;
+	int i;
+
+	/* CPU 0 is initialised in head64.c */
+	if (cpu != 0)
+		pda_init(cpu);
+	else
+		estacks = boot_exception_stacks;
+
+	me = current;
+
+	if (cpu_test_and_set(cpu, cpu_initialized))
+		panic("CPU#%d already initialized!\n", cpu);
+
+	printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+
+	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+
+	/*
+	 * Initialize the per-CPU GDT with the boot GDT,
+	 * and set up the GDT descriptor:
+	 */
+
+	switch_to_new_gdt();
+	load_idt((const struct desc_ptr *)&idt_descr);
+
+	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
+	syscall_init();
+
+	wrmsrl(MSR_FS_BASE, 0);
+	wrmsrl(MSR_KERNEL_GS_BASE, 0);
+	barrier();
+
+	check_efer();
+
+	/*
+	 * set up and load the per-CPU TSS
+	 */
+	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+		static const unsigned int order[N_EXCEPTION_STACKS] = {
+			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		};
+		if (cpu) {
+			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+			if (!estacks)
+				panic("Cannot allocate exception stack %ld %d\n",
+				      v, cpu);
+		}
+		estacks += PAGE_SIZE << order[v];
+		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
+	}
+
+	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+	/*
+	 * <= is required because the CPU will access up to
+	 * 8 bits beyond the end of the IO permission bitmap.
+	 */
+	for (i = 0; i <= IO_BITMAP_LONGS; i++)
+		t->io_bitmap[i] = ~0UL;
+
+	atomic_inc(&init_mm.mm_count);
+	me->active_mm = &init_mm;
+	if (me->mm)
+		BUG();
+	enter_lazy_tlb(&init_mm, me);
+
+	load_sp0(t, &current->thread);
+	set_tss_desc(cpu, t);
+	load_TR_desc();
+	load_LDT(&init_mm.context);
+
+#ifdef CONFIG_KGDB
+	/*
+	 * If the kgdb is connected no debug regs should be altered.  This
+	 * is only applicable when KGDB and a KGDB I/O module are built
+	 * into the kernel and you are using early debugging with
+	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
+	 */
+	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
+		arch_kgdb_ops.correct_hw_break();
+	else {
+#endif
+	/*
+	 * Clear all 6 debug registers:
+	 */
+
+	set_debugreg(0UL, 0);
+	set_debugreg(0UL, 1);
+	set_debugreg(0UL, 2);
+	set_debugreg(0UL, 3);
+	set_debugreg(0UL, 6);
+	set_debugreg(0UL, 7);
+#ifdef CONFIG_KGDB
+	/* If the kgdb is connected no debug regs should be altered. */
+	}
+#endif
+
+	fpu_init();
+
+	raw_local_save_flags(kernel_eflags);
+
+	if (is_uv_system())
+		uv_cpu_init();
+}
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 783691b2a738..4d894e8565fe 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -1,3 +1,6 @@
+#ifndef ARCH_X86_CPU_H
+
+#define ARCH_X86_CPU_H
 
 struct cpu_model_info {
 	int vendor;
@@ -36,3 +39,5 @@ extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[];
 
 extern int get_model_name(struct cpuinfo_x86 *c);
 extern void display_cacheinfo(struct cpuinfo_x86 *c);
+
+#endif
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index b0c8208df9fa..ff2fff56f0a8 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -200,10 +200,12 @@ static void drv_read(struct drv_cmd *cmd)
 static void drv_write(struct drv_cmd *cmd)
 {
 	cpumask_t saved_mask = current->cpus_allowed;
+	cpumask_of_cpu_ptr_declare(cpu_mask);
 	unsigned int i;
 
-	for_each_cpu_mask(i, cmd->mask) {
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
+	for_each_cpu_mask_nr(i, cmd->mask) {
+		cpumask_of_cpu_ptr_next(cpu_mask, i);
+		set_cpus_allowed_ptr(current, cpu_mask);
 		do_drv_write(cmd);
 	}
 
@@ -267,11 +269,12 @@ static unsigned int get_measured_perf(unsigned int cpu)
 	} aperf_cur, mperf_cur;
 
 	cpumask_t saved_mask;
+	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	unsigned int perf_percent;
 	unsigned int retval;
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpu_mask);
 	if (get_cpu() != cpu) {
 		/* We were not able to run on requested processor */
 		put_cpu();
@@ -337,6 +340,7 @@ static unsigned int get_measured_perf(unsigned int cpu)
 
 static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 {
+	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	struct acpi_cpufreq_data *data = per_cpu(drv_data, cpu);
 	unsigned int freq;
 	unsigned int cached_freq;
@@ -349,7 +353,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 	}
 
 	cached_freq = data->freq_table[data->acpi_data->state].frequency;
-	freq = extract_freq(get_cur_val(&cpumask_of_cpu(cpu)), data);
+	freq = extract_freq(get_cur_val(cpu_mask), data);
 	if (freq != cached_freq) {
 		/*
 		 * The dreaded BIOS frequency change behind our back.
@@ -451,7 +455,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
 	freqs.new = data->freq_table[next_state].frequency;
-	for_each_cpu_mask(i, cmd.mask) {
+	for_each_cpu_mask_nr(i, cmd.mask) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -466,7 +470,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	for_each_cpu_mask(i, cmd.mask) {
+	for_each_cpu_mask_nr(i, cmd.mask) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index f03e9153618e..965ea52767ac 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -26,9 +26,10 @@
 #define NFORCE2_SAFE_DISTANCE 50
 
 /* Delay in ms between FSB changes */
-//#define NFORCE2_DELAY 10
+/* #define NFORCE2_DELAY 10 */
 
-/* nforce2_chipset:
+/*
+ * nforce2_chipset:
  * FSB is changed using the chipset
  */
 static struct pci_dev *nforce2_chipset_dev;
@@ -36,13 +37,13 @@ static struct pci_dev *nforce2_chipset_dev;
 /* fid:
  * multiplier * 10
  */
-static int fid = 0;
+static int fid;
 
 /* min_fsb, max_fsb:
  * minimum and maximum FSB (= FSB at boot time)
  */
-static int min_fsb = 0;
-static int max_fsb = 0;
+static int min_fsb;
+static int max_fsb;
 
 MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
 MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
@@ -53,7 +54,7 @@ module_param(min_fsb, int, 0444);
 
 MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
 MODULE_PARM_DESC(min_fsb,
-                 "Minimum FSB to use, if not defined: current FSB - 50");
+		"Minimum FSB to use, if not defined: current FSB - 50");
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
 
@@ -139,7 +140,7 @@ static unsigned int nforce2_fsb_read(int bootfsb)
 
 	/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
 	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
-						0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL);
+						0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL);
 	if (!nforce2_sub5)
 		return 0;
 
@@ -147,13 +148,13 @@ static unsigned int nforce2_fsb_read(int bootfsb)
 	fsb /= 1000000;
 
 	/* Check if PLL register is already set */
-	pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 
-	if(bootfsb || !temp)
+	if (bootfsb || !temp)
 		return fsb;
-		
+
 	/* Use PLL register FSB value */
-	pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp);
+	pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp);
 	fsb = nforce2_calc_fsb(temp);
 
 	return fsb;
@@ -184,7 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb)
 	}
 
 	/* First write? Then set actual value */
-	pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 	if (!temp) {
 		pll = nforce2_calc_pll(tfsb);
 
@@ -210,7 +211,8 @@ static int nforce2_set_fsb(unsigned int fsb)
 			tfsb--;
 
 		/* Calculate the PLL reg. value */
-		if ((pll = nforce2_calc_pll(tfsb)) == -1)
+		pll = nforce2_calc_pll(tfsb);
+		if (pll == -1)
 			return -EINVAL;
 
 		nforce2_write_pll(pll);
@@ -249,7 +251,7 @@ static unsigned int nforce2_get(unsigned int cpu)
 static int nforce2_target(struct cpufreq_policy *policy,
 			  unsigned int target_freq, unsigned int relation)
 {
-//        unsigned long         flags;
+/*        unsigned long         flags; */
 	struct cpufreq_freqs freqs;
 	unsigned int target_fsb;
 
@@ -271,17 +273,17 @@ static int nforce2_target(struct cpufreq_policy *policy,
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* Disable IRQs */
-	//local_irq_save(flags);
+	/* local_irq_save(flags); */
 
 	if (nforce2_set_fsb(target_fsb) < 0)
 		printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
-                       target_fsb);
+			target_fsb);
 	else
 		dprintk("Changed FSB successfully to %d\n",
-                       target_fsb);
+			target_fsb);
 
 	/* Enable IRQs */
-	//local_irq_restore(flags);
+	/* local_irq_restore(flags); */
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
@@ -302,8 +304,8 @@ static int nforce2_verify(struct cpufreq_policy *policy)
 		policy->max = (fsb_pol_max + 1) * fid * 100;
 
 	cpufreq_verify_within_limits(policy,
-                                     policy->cpuinfo.min_freq,
-                                     policy->cpuinfo.max_freq);
+				     policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
 	return 0;
 }
 
@@ -347,7 +349,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 	/* Set maximum FSB to FSB at boot time */
 	max_fsb = nforce2_fsb_read(1);
 
-	if(!max_fsb)
+	if (!max_fsb)
 		return -EIO;
 
 	if (!min_fsb)
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 199e4e05e5dc..f1685fb91fbd 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -122,7 +122,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 		return 0;
 
 	/* notifiers */
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -130,11 +130,11 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 	/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
 	 * Developer's Manual, Volume 3
 	 */
-	for_each_cpu_mask(i, policy->cpus)
+	for_each_cpu_mask_nr(i, policy->cpus)
 		cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
 
 	/* notifiers */
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
index f8a63b3664e3..35fb4eaf6e1c 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
@@ -1,5 +1,4 @@
 /*
- *  $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $
  *  (C) 2003 Dave Jones.
  *
  *  Licensed under the terms of the GNU GPL License version 2.
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 206791eb46e3..53c7b6936973 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -479,11 +479,12 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 static int check_supported_cpu(unsigned int cpu)
 {
 	cpumask_t oldmask;
+	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	u32 eax, ebx, ecx, edx;
 	unsigned int rc = 0;
 
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpu_mask);
 
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
@@ -966,7 +967,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 	freqs.old = find_khz_freq_from_fid(data->currfid);
 	freqs.new = find_khz_freq_from_fid(fid);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -974,7 +975,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 	res = transition_fid_vid(data, fid, vid);
 	freqs.new = find_khz_freq_from_fid(data->currfid);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -997,7 +998,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -1005,7 +1006,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	res = transition_pstate(data, pstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -1016,6 +1017,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
 {
 	cpumask_t oldmask;
+	cpumask_of_cpu_ptr(cpu_mask, pol->cpu);
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 	u32 checkfid;
 	u32 checkvid;
@@ -1030,7 +1032,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
+	set_cpus_allowed_ptr(current, cpu_mask);
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1105,6 +1107,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask;
+	cpumask_of_cpu_ptr_declare(newmask);
 	int rc;
 
 	if (!cpu_online(pol->cpu))
@@ -1156,7 +1159,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
+	cpumask_of_cpu_ptr_next(newmask, pol->cpu);
+	set_cpus_allowed_ptr(current, newmask);
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1178,7 +1182,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	set_cpus_allowed_ptr(current, &oldmask);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cpus = cpumask_of_cpu(pol->cpu);
+		pol->cpus = *newmask;
 	else
 		pol->cpus = per_cpu(cpu_core_map, pol->cpu);
 	data->available_cores = &(pol->cpus);
@@ -1244,6 +1248,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask = current->cpus_allowed;
+	cpumask_of_cpu_ptr(newmask, cpu);
 	unsigned int khz = 0;
 	unsigned int first;
 
@@ -1253,7 +1258,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 	if (!data)
 		return -EINVAL;
 
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, newmask);
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX
 			"limiting to CPU %d failed in powernowk8_get\n", cpu);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 908dd347c67e..ca2ac13b7af2 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -28,7 +28,8 @@
 #define PFX		"speedstep-centrino: "
 #define MAINTAINER	"cpufreq@lists.linux.org.uk"
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+#define dprintk(msg...) \
+	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
 
 #define INTEL_MSR_RANGE	(0xffff)
 
@@ -66,11 +67,12 @@ struct cpu_model
 
 	struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
 };
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x);
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x);
 
 /* Operating points for current CPU */
-static struct cpu_model *centrino_model[NR_CPUS];
-static const struct cpu_id *centrino_cpu[NR_CPUS];
+static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
+static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
 
 static struct cpufreq_driver centrino_driver;
 
@@ -255,7 +257,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 		return -ENOENT;
 	}
 
-	centrino_model[policy->cpu] = model;
+	per_cpu(centrino_model, policy->cpu) = model;
 
 	dprintk("found \"%s\": max frequency: %dkHz\n",
 	       model->model_name, model->max_freq);
@@ -264,10 +266,14 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 }
 
 #else
-static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; }
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+	return -ENODEV;
+}
 #endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
 
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x)
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x)
 {
 	if ((c->x86 == x->x86) &&
 	    (c->x86_model == x->x86_model) &&
@@ -286,23 +292,28 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
 	 * for centrino, as some DSDTs are buggy.
 	 * Ideally, this can be done using the acpi_data structure.
 	 */
-	if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) ||
-	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) ||
-	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) {
+	if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
 		msr = (msr >> 8) & 0xff;
 		return msr * 100000;
 	}
 
-	if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points))
+	if ((!per_cpu(centrino_model, cpu)) ||
+	    (!per_cpu(centrino_model, cpu)->op_points))
 		return 0;
 
 	msr &= 0xffff;
-	for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) {
-		if (msr == centrino_model[cpu]->op_points[i].index)
-			return centrino_model[cpu]->op_points[i].frequency;
+	for (i = 0;
+		per_cpu(centrino_model, cpu)->op_points[i].frequency
+							!= CPUFREQ_TABLE_END;
+	     i++) {
+		if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
+			return per_cpu(centrino_model, cpu)->
+							op_points[i].frequency;
 	}
 	if (failsafe)
-		return centrino_model[cpu]->op_points[i-1].frequency;
+		return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
 	else
 		return 0;
 }
@@ -313,9 +324,10 @@ static unsigned int get_cur_freq(unsigned int cpu)
 	unsigned l, h;
 	unsigned clock_freq;
 	cpumask_t saved_mask;
+	cpumask_of_cpu_ptr(new_mask, cpu);
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, new_mask);
 	if (smp_processor_id() != cpu)
 		return 0;
 
@@ -347,7 +359,8 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 	int i;
 
 	/* Only Intel makes Enhanced Speedstep-capable CPUs */
-	if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST))
+	if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+	    !cpu_has(cpu, X86_FEATURE_EST))
 		return -ENODEV;
 
 	if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
@@ -361,9 +374,9 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 			break;
 
 	if (i != N_IDS)
-		centrino_cpu[policy->cpu] = &cpu_ids[i];
+		per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
 
-	if (!centrino_cpu[policy->cpu]) {
+	if (!per_cpu(centrino_cpu, policy->cpu)) {
 		dprintk("found unsupported CPU with "
 		"Enhanced SpeedStep: send /proc/cpuinfo to "
 		MAINTAINER "\n");
@@ -386,23 +399,26 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 		/* check to see if it stuck */
 		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 		if (!(l & (1<<16))) {
-			printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n");
+			printk(KERN_INFO PFX
+				"couldn't enable Enhanced SpeedStep\n");
 			return -ENODEV;
 		}
 	}
 
 	freq = get_cur_freq(policy->cpu);
-
-	policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
+	policy->cpuinfo.transition_latency = 10000;
+						/* 10uS transition latency */
 	policy->cur = freq;
 
 	dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
 
-	ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points);
+	ret = cpufreq_frequency_table_cpuinfo(policy,
+		per_cpu(centrino_model, policy->cpu)->op_points);
 	if (ret)
 		return (ret);
 
-	cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu);
+	cpufreq_frequency_table_get_attr(
+		per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
 
 	return 0;
 }
@@ -411,12 +427,12 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
 
-	if (!centrino_model[cpu])
+	if (!per_cpu(centrino_model, cpu))
 		return -ENODEV;
 
 	cpufreq_frequency_table_put_attr(cpu);
 
-	centrino_model[cpu] = NULL;
+	per_cpu(centrino_model, cpu) = NULL;
 
 	return 0;
 }
@@ -430,17 +446,26 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
  */
 static int centrino_verify (struct cpufreq_policy *policy)
 {
-	return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points);
+	return cpufreq_frequency_table_verify(policy,
+			per_cpu(centrino_model, policy->cpu)->op_points);
 }
 
 /**
  * centrino_setpolicy - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
+struct allmasks {
+	cpumask_t		online_policy_cpus;
+	cpumask_t		saved_mask;
+	cpumask_t		set_mask;
+	cpumask_t		covered_cpus;
+};
+
 static int centrino_target (struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
@@ -448,48 +473,55 @@ static int centrino_target (struct cpufreq_policy *policy,
 	unsigned int    newstate = 0;
 	unsigned int	msr, oldmsr = 0, h = 0, cpu = policy->cpu;
 	struct cpufreq_freqs	freqs;
-	cpumask_t		online_policy_cpus;
-	cpumask_t		saved_mask;
-	cpumask_t		set_mask;
-	cpumask_t		covered_cpus;
 	int			retval = 0;
 	unsigned int		j, k, first_cpu, tmp;
-
-	if (unlikely(centrino_model[cpu] == NULL))
-		return -ENODEV;
+	CPUMASK_ALLOC(allmasks);
+	CPUMASK_PTR(online_policy_cpus, allmasks);
+	CPUMASK_PTR(saved_mask, allmasks);
+	CPUMASK_PTR(set_mask, allmasks);
+	CPUMASK_PTR(covered_cpus, allmasks);
+
+	if (unlikely(allmasks == NULL))
+		return -ENOMEM;
+
+	if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
+		retval = -ENODEV;
+		goto out;
+	}
 
 	if (unlikely(cpufreq_frequency_table_target(policy,
-			centrino_model[cpu]->op_points,
+			per_cpu(centrino_model, cpu)->op_points,
 			target_freq,
 			relation,
 			&newstate))) {
-		return -EINVAL;
+		retval = -EINVAL;
+		goto out;
 	}
 
 #ifdef CONFIG_HOTPLUG_CPU
 	/* cpufreq holds the hotplug lock, so we are safe from here on */
-	cpus_and(online_policy_cpus, cpu_online_map, policy->cpus);
+	cpus_and(*online_policy_cpus, cpu_online_map, policy->cpus);
 #else
-	online_policy_cpus = policy->cpus;
+	*online_policy_cpus = policy->cpus;
 #endif
 
-	saved_mask = current->cpus_allowed;
+	*saved_mask = current->cpus_allowed;
 	first_cpu = 1;
-	cpus_clear(covered_cpus);
-	for_each_cpu_mask(j, online_policy_cpus) {
+	cpus_clear(*covered_cpus);
+	for_each_cpu_mask_nr(j, *online_policy_cpus) {
 		/*
 		 * Support for SMP systems.
 		 * Make sure we are running on CPU that wants to change freq
 		 */
-		cpus_clear(set_mask);
+		cpus_clear(*set_mask);
 		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-			cpus_or(set_mask, set_mask, online_policy_cpus);
+			cpus_or(*set_mask, *set_mask, *online_policy_cpus);
 		else
-			cpu_set(j, set_mask);
+			cpu_set(j, *set_mask);
 
-		set_cpus_allowed_ptr(current, &set_mask);
+		set_cpus_allowed_ptr(current, set_mask);
 		preempt_disable();
-		if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
+		if (unlikely(!cpu_isset(smp_processor_id(), *set_mask))) {
 			dprintk("couldn't limit to CPUs in this domain\n");
 			retval = -EAGAIN;
 			if (first_cpu) {
@@ -500,7 +532,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			break;
 		}
 
-		msr = centrino_model[cpu]->op_points[newstate].index;
+		msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
 
 		if (first_cpu) {
 			rdmsr(MSR_IA32_PERF_CTL, oldmsr, h);
@@ -517,7 +549,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
 				target_freq, freqs.old, freqs.new, msr);
 
-			for_each_cpu_mask(k, online_policy_cpus) {
+			for_each_cpu_mask_nr(k, *online_policy_cpus) {
 				freqs.cpu = k;
 				cpufreq_notify_transition(&freqs,
 					CPUFREQ_PRECHANGE);
@@ -536,11 +568,11 @@ static int centrino_target (struct cpufreq_policy *policy,
 			break;
 		}
 
-		cpu_set(j, covered_cpus);
+		cpu_set(j, *covered_cpus);
 		preempt_enable();
 	}
 
-	for_each_cpu_mask(k, online_policy_cpus) {
+	for_each_cpu_mask_nr(k, *online_policy_cpus) {
 		freqs.cpu = k;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -553,10 +585,12 @@ static int centrino_target (struct cpufreq_policy *policy,
 		 * Best effort undo..
 		 */
 
-		if (!cpus_empty(covered_cpus)) {
-			for_each_cpu_mask(j, covered_cpus) {
-				set_cpus_allowed_ptr(current,
-						     &cpumask_of_cpu(j));
+		if (!cpus_empty(*covered_cpus)) {
+			cpumask_of_cpu_ptr_declare(new_mask);
+
+			for_each_cpu_mask_nr(j, *covered_cpus) {
+				cpumask_of_cpu_ptr_next(new_mask, j);
+				set_cpus_allowed_ptr(current, new_mask);
 				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
 			}
 		}
@@ -564,19 +598,22 @@ static int centrino_target (struct cpufreq_policy *policy,
 		tmp = freqs.new;
 		freqs.new = freqs.old;
 		freqs.old = tmp;
-		for_each_cpu_mask(j, online_policy_cpus) {
+		for_each_cpu_mask_nr(j, *online_policy_cpus) {
 			freqs.cpu = j;
 			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 		}
 	}
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return 0;
+	set_cpus_allowed_ptr(current, saved_mask);
+	retval = 0;
+	goto out;
 
 migrate_end:
 	preempt_enable();
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return 0;
+	set_cpus_allowed_ptr(current, saved_mask);
+out:
+	CPUMASK_FREE(allmasks);
+	return retval;
 }
 
 static struct freq_attr* centrino_attr[] = {
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 1b50244b1fdf..2f3728dc24f6 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -244,7 +244,8 @@ static unsigned int _speedstep_get(const cpumask_t *cpus)
 
 static unsigned int speedstep_get(unsigned int cpu)
 {
-	return _speedstep_get(&cpumask_of_cpu(cpu));
+	cpumask_of_cpu_ptr(newmask, cpu);
+	return _speedstep_get(newmask);
 }
 
 /**
@@ -279,7 +280,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 
 	cpus_allowed = current->cpus_allowed;
 
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -292,7 +293,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 	/* allow to be run on all CPUs */
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index fe9224c51d37..b75f2569b8f8 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -226,6 +226,20 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 
 	if (cpu_has_bts)
 		ds_init_intel(c);
+
+	/*
+	 * See if we have a good local APIC by checking for buggy Pentia,
+	 * i.e. all B steppings and the C2 stepping of P54C when using their
+	 * integrated APIC (see 11AP erratum in "Pentium Processor
+	 * Specification Update").
+	 */
+	if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
+	    (c->x86_mask < 0x6 || c->x86_mask == 0xb))
+		set_cpu_cap(c, X86_FEATURE_11AP);
+
+#ifdef CONFIG_X86_NUMAQ
+	numaq_tsc_disable();
+#endif
 }
 
 static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c
new file mode 100644
index 000000000000..1019c58d39f0
--- /dev/null
+++ b/arch/x86/kernel/cpu/intel_64.c
@@ -0,0 +1,95 @@
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/topology.h>
+#include <asm/numa_64.h>
+
+#include "cpu.h"
+
+static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
+{
+	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
+	    (c->x86 == 0x6 && c->x86_model >= 0x0e))
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
+}
+
+/*
+ * find out the number of processor cores on the die
+ */
+static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
+{
+	unsigned int eax, t;
+
+	if (c->cpuid_level < 4)
+		return 1;
+
+	cpuid_count(4, 0, &eax, &t, &t, &t);
+
+	if (eax & 0x1f)
+		return ((eax >> 26) + 1);
+	else
+		return 1;
+}
+
+static void __cpuinit srat_detect_node(void)
+{
+#ifdef CONFIG_NUMA
+	unsigned node;
+	int cpu = smp_processor_id();
+	int apicid = hard_smp_processor_id();
+
+	/* Don't do the funky fallback heuristics the AMD version employs
+	   for now. */
+	node = apicid_to_node[apicid];
+	if (node == NUMA_NO_NODE || !node_online(node))
+		node = first_node(node_online_map);
+	numa_set_node(cpu, node);
+
+	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+#endif
+}
+
+static void __cpuinit init_intel(struct cpuinfo_x86 *c)
+{
+	init_intel_cacheinfo(c);
+	if (c->cpuid_level > 9) {
+		unsigned eax = cpuid_eax(10);
+		/* Check for version and the number of counters */
+		if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
+			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
+	}
+
+	if (cpu_has_ds) {
+		unsigned int l1, l2;
+		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
+		if (!(l1 & (1<<11)))
+			set_cpu_cap(c, X86_FEATURE_BTS);
+		if (!(l1 & (1<<12)))
+			set_cpu_cap(c, X86_FEATURE_PEBS);
+	}
+
+
+	if (cpu_has_bts)
+		ds_init_intel(c);
+
+	if (c->x86 == 15)
+		c->x86_cache_alignment = c->x86_clflush_size * 2;
+	if (c->x86 == 6)
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+	c->x86_max_cores = intel_num_cpu_cores(c);
+
+	srat_detect_node();
+}
+
+static struct cpu_dev intel_cpu_dev __cpuinitdata = {
+	.c_vendor	= "Intel",
+	.c_ident	= { "GenuineIntel" },
+	.c_early_init   = early_init_intel,
+	.c_init		= init_intel,
+};
+cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
+
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 26d615dcb149..650d40f7912b 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -62,6 +62,7 @@ static struct _cache_table cache_table[] __cpuinitdata =
 	{ 0x4b, LVL_3,      8192 },	/* 16-way set assoc, 64 byte line size */
 	{ 0x4c, LVL_3,     12288 },	/* 12-way set assoc, 64 byte line size */
 	{ 0x4d, LVL_3,     16384 },	/* 16-way set assoc, 64 byte line size */
+	{ 0x4e, LVL_2,      6144 },	/* 24-way set assoc, 64 byte line size */
 	{ 0x60, LVL_1_DATA, 16 },	/* 8-way set assoc, sectored cache, 64 byte line size */
 	{ 0x66, LVL_1_DATA, 8 },	/* 4-way set assoc, sectored cache, 64 byte line size */
 	{ 0x67, LVL_1_DATA, 16 },	/* 4-way set assoc, sectored cache, 64 byte line size */
@@ -488,7 +489,7 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
 	int sibling;
 
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
-	for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) {
+	for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
 		sibling_leaf = CPUID4_INFO_IDX(sibling, index);	
 		cpu_clear(cpu, sibling_leaf->shared_cpu_map);
 	}
@@ -515,6 +516,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 	unsigned long		j;
 	int			retval;
 	cpumask_t		oldmask;
+	cpumask_of_cpu_ptr(newmask, cpu);
 
 	if (num_cache_leaves == 0)
 		return -ENOENT;
@@ -525,7 +527,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 		return -ENOMEM;
 
 	oldmask = current->cpus_allowed;
-	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	retval = set_cpus_allowed_ptr(current, newmask);
 	if (retval)
 		goto out;
 
@@ -779,15 +781,14 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 			}
 			kobject_put(per_cpu(cache_kobject, cpu));
 			cpuid4_cache_sysfs_exit(cpu);
-			break;
+			return retval;
 		}
 		kobject_uevent(&(this_object->kobj), KOBJ_ADD);
 	}
-	if (!retval)
-		cpu_set(cpu, cache_dev_map);
+	cpu_set(cpu, cache_dev_map);
 
 	kobject_uevent(per_cpu(cache_kobject, cpu), KOBJ_ADD);
-	return retval;
+	return 0;
 }
 
 static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
index e633c9c2b764..f390c9f66351 100644
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ b/arch/x86/kernel/cpu/mcheck/k7.c
@@ -9,23 +9,23 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
 
 #include "mce.h"
 
 /* Machine Check Handler For AMD Athlon/Duron */
-static void k7_machine_check(struct pt_regs * regs, long error_code)
+static void k7_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover=1;
+	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
 	int i;
 
-	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover=0;
+		recover = 0;
 
 	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
 		smp_processor_id(), mcgsth, mcgstl);
@@ -60,12 +60,12 @@ static void k7_machine_check(struct pt_regs * regs, long error_code)
 	}
 
 	if (recover&2)
-		panic ("CPU context corrupt");
+		panic("CPU context corrupt");
 	if (recover&1)
-		panic ("Unable to continue");
-	printk (KERN_EMERG "Attempting to continue.\n");
+		panic("Unable to continue");
+	printk(KERN_EMERG "Attempting to continue.\n");
 	mcgstl &= ~(1<<2);
-	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
 
@@ -81,25 +81,25 @@ void amd_mcheck_init(struct cpuinfo_x86 *c)
 	machine_check_vector = k7_machine_check;
 	wmb();
 
-	printk (KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	printk(KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr(MSR_IA32_MCG_CAP, l, h);
 	if (l & (1<<8))	/* Control register present ? */
-		wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
 
 	/* Clear status for MC index 0 separately, we don't touch CTL,
 	 * as some K7 Athlons cause spurious MCEs when its enabled. */
 	if (boot_cpu_data.x86 == 6) {
-		wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0);
+		wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0);
 		i = 1;
 	} else
 		i = 0;
-	for (; i<nr_mce_banks; i++) {
-		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	for (; i < nr_mce_banks; i++) {
+		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
 	}
 
-	set_in_cr4 (X86_CR4_MCE);
-	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
 		smp_processor_id());
 }
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index e07e8c068ae0..65a339678ece 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -9,6 +9,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/rcupdate.h>
 #include <linux/kallsyms.h>
@@ -31,7 +32,7 @@
 #include <asm/idle.h>
 
 #define MISC_MCELOG_MINOR 227
-#define NR_BANKS 6
+#define NR_SYSFS_BANKS 6
 
 atomic_t mce_entry;
 
@@ -46,7 +47,7 @@ static int mce_dont_init;
  */
 static int tolerant = 1;
 static int banks;
-static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL };
+static unsigned long bank[NR_SYSFS_BANKS] = { [0 ... NR_SYSFS_BANKS-1] = ~0UL };
 static unsigned long notify_user;
 static int rip_msr;
 static int mce_bootlog = -1;
@@ -209,7 +210,7 @@ void do_machine_check(struct pt_regs * regs, long error_code)
 	barrier();
 
 	for (i = 0; i < banks; i++) {
-		if (!bank[i])
+		if (i < NR_SYSFS_BANKS && !bank[i])
 			continue;
 
 		m.misc = 0;
@@ -363,7 +364,7 @@ static void mcheck_check_cpu(void *info)
 
 static void mcheck_timer(struct work_struct *work)
 {
-	on_each_cpu(mcheck_check_cpu, NULL, 1, 1);
+	on_each_cpu(mcheck_check_cpu, NULL, 1);
 
 	/*
 	 * Alert userspace if needed.  If we logged an MCE, reduce the
@@ -444,9 +445,10 @@ static void mce_init(void *dummy)
 
 	rdmsrl(MSR_IA32_MCG_CAP, cap);
 	banks = cap & 0xff;
-	if (banks > NR_BANKS) {
-		printk(KERN_INFO "MCE: warning: using only %d banks\n", banks);
-		banks = NR_BANKS;
+	if (banks > MCE_EXTENDED_BANK) {
+		banks = MCE_EXTENDED_BANK;
+		printk(KERN_INFO "MCE: warning: using only %d banks\n",
+		       MCE_EXTENDED_BANK);
 	}
 	/* Use accurate RIP reporting if available. */
 	if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9)
@@ -462,7 +464,11 @@ static void mce_init(void *dummy)
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 
 	for (i = 0; i < banks; i++) {
-		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
+		if (i < NR_SYSFS_BANKS)
+			wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
+		else
+			wrmsrl(MSR_IA32_MC0_CTL+4*i, ~0UL);
+
 		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
 	}
 }
@@ -527,10 +533,12 @@ static int open_exclu;	/* already open exclusive? */
 
 static int mce_open(struct inode *inode, struct file *file)
 {
+	lock_kernel();
 	spin_lock(&mce_state_lock);
 
 	if (open_exclu || (open_count && (file->f_flags & O_EXCL))) {
 		spin_unlock(&mce_state_lock);
+		unlock_kernel();
 		return -EBUSY;
 	}
 
@@ -539,6 +547,7 @@ static int mce_open(struct inode *inode, struct file *file)
 	open_count++;
 
 	spin_unlock(&mce_state_lock);
+	unlock_kernel();
 
 	return nonseekable_open(inode, file);
 }
@@ -571,7 +580,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 	char __user *buf = ubuf;
 	int i, err;
 
-	cpu_tsc = kmalloc(NR_CPUS * sizeof(long), GFP_KERNEL);
+	cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
 	if (!cpu_tsc)
 		return -ENOMEM;
 
@@ -612,7 +621,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 	 * Collect entries that were still getting written before the
 	 * synchronize.
 	 */
-	on_each_cpu(collect_tscs, cpu_tsc, 1, 1);
+	on_each_cpu(collect_tscs, cpu_tsc, 1);
 	for (i = next; i < MCE_LOG_LEN; i++) {
 		if (mcelog.entry[i].finished &&
 		    mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) {
@@ -737,7 +746,7 @@ static void mce_restart(void)
 	if (next_interval)
 		cancel_delayed_work(&mcheck_work);
 	/* Timer race is harmless here */
-	on_each_cpu(mce_init, NULL, 1, 1);
+	on_each_cpu(mce_init, NULL, 1);
 	next_interval = check_interval * HZ;
 	if (next_interval)
 		schedule_delayed_work(&mcheck_work,
@@ -753,10 +762,14 @@ DEFINE_PER_CPU(struct sys_device, device_mce);
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
-	static ssize_t show_ ## name(struct sys_device *s, char *buf) {	\
+	static ssize_t show_ ## name(struct sys_device *s,		\
+				     struct sysdev_attribute *attr,	\
+				     char *buf) {			\
 		return sprintf(buf, "%lx\n", (unsigned long)var);	\
 	}								\
-	static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \
+	static ssize_t set_ ## name(struct sys_device *s,		\
+				    struct sysdev_attribute *attr,	\
+				    const char *buf, size_t siz) {	\
 		char *end;						\
 		unsigned long new = simple_strtoul(buf, &end, 0);	\
 		if (end == buf) return -EINVAL;				\
@@ -766,7 +779,10 @@ DEFINE_PER_CPU(struct sys_device, device_mce);
 	}								\
 	static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name);
 
-/* TBD should generate these dynamically based on number of available banks */
+/*
+ * TBD should generate these dynamically based on number of available banks.
+ * Have only 6 contol banks in /sysfs until then.
+ */
 ACCESSOR(bank0ctl,bank[0],mce_restart())
 ACCESSOR(bank1ctl,bank[1],mce_restart())
 ACCESSOR(bank2ctl,bank[2],mce_restart())
@@ -774,14 +790,16 @@ ACCESSOR(bank3ctl,bank[3],mce_restart())
 ACCESSOR(bank4ctl,bank[4],mce_restart())
 ACCESSOR(bank5ctl,bank[5],mce_restart())
 
-static ssize_t show_trigger(struct sys_device *s, char *buf)
+static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				char *buf)
 {
 	strcpy(buf, trigger);
 	strcat(buf, "\n");
 	return strlen(trigger) + 1;
 }
 
-static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
+static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				const char *buf,size_t siz)
 {
 	char *p;
 	int len;
@@ -794,12 +812,12 @@ static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
 }
 
 static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-ACCESSOR(tolerant,tolerant,)
+static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
 ACCESSOR(check_interval,check_interval,mce_restart())
 static struct sysdev_attribute *mce_attributes[] = {
 	&attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl,
 	&attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl,
-	&attr_tolerant, &attr_check_interval, &attr_trigger,
+	&attr_tolerant.attr, &attr_check_interval, &attr_trigger,
 	NULL
 };
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 7c9a813e1193..88736cadbaa6 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -527,7 +527,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	if (err)
 		goto out_free;
 
-	for_each_cpu_mask(i, b->cpus) {
+	for_each_cpu_mask_nr(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
@@ -617,7 +617,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 #endif
 
 	/* remove all sibling symlinks before unregistering */
-	for_each_cpu_mask(i, b->cpus) {
+	for_each_cpu_mask_nr(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index 00ccb6c14ec2..cc1fccdd31e0 100644
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
@@ -59,7 +59,7 @@ static DECLARE_DELAYED_WORK(mce_work, mce_work_fn);
 
 static void mce_work_fn(struct work_struct *work)
 {
-	on_each_cpu(mce_checkregs, NULL, 1, 1);
+	on_each_cpu(mce_checkregs, NULL, 1);
 	schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index cb03345554a5..9b60fce09f75 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -8,7 +8,7 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
@@ -32,12 +32,12 @@ struct intel_mce_extended_msrs {
 	/* u32 *reserved[]; */
 };
 
-static int mce_num_extended_msrs = 0;
+static int mce_num_extended_msrs;
 
 
 #ifdef CONFIG_X86_MCE_P4THERMAL
 static void unexpected_thermal_interrupt(struct pt_regs *regs)
-{	
+{
 	printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
 			smp_processor_id());
 	add_taint(TAINT_MACHINE_CHECK);
@@ -83,7 +83,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	 * be some SMM goo which handles it, so we can't even put a handler
 	 * since it might be delivered via SMI already -zwanem.
 	 */
-	rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 	h = apic_read(APIC_LVTTHMR);
 	if ((l & (1<<3)) && (h & APIC_DM_SMI)) {
 		printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
@@ -91,7 +91,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 		return; /* -EBUSY */
 	}
 
-	/* check whether a vector already exists, temporarily masked? */	
+	/* check whether a vector already exists, temporarily masked? */
 	if (h & APIC_VECTOR_MASK) {
 		printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
 				"installed\n",
@@ -102,20 +102,20 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	/* The temperature transition interrupt handler setup */
 	h = THERMAL_APIC_VECTOR;		/* our delivery vector */
 	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);	/* we'll mask till we're ready */
-	apic_write_around(APIC_LVTTHMR, h);
+	apic_write(APIC_LVTTHMR, h);
 
-	rdmsr (MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
+	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
 
 	/* ok we're good to go... */
 	vendor_thermal_interrupt = intel_thermal_interrupt;
-	
-	rdmsr (MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
 
-	l = apic_read (APIC_LVTTHMR);
-	apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-	printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
+
+	l = apic_read(APIC_LVTTHMR);
+	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+	printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
 
 	/* enable thermal throttle processing */
 	atomic_set(&therm_throt_en, 1);
@@ -129,28 +129,28 @@ static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 {
 	u32 h;
 
-	rdmsr (MSR_IA32_MCG_EAX, r->eax, h);
-	rdmsr (MSR_IA32_MCG_EBX, r->ebx, h);
-	rdmsr (MSR_IA32_MCG_ECX, r->ecx, h);
-	rdmsr (MSR_IA32_MCG_EDX, r->edx, h);
-	rdmsr (MSR_IA32_MCG_ESI, r->esi, h);
-	rdmsr (MSR_IA32_MCG_EDI, r->edi, h);
-	rdmsr (MSR_IA32_MCG_EBP, r->ebp, h);
-	rdmsr (MSR_IA32_MCG_ESP, r->esp, h);
-	rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h);
-	rdmsr (MSR_IA32_MCG_EIP, r->eip, h);
+	rdmsr(MSR_IA32_MCG_EAX, r->eax, h);
+	rdmsr(MSR_IA32_MCG_EBX, r->ebx, h);
+	rdmsr(MSR_IA32_MCG_ECX, r->ecx, h);
+	rdmsr(MSR_IA32_MCG_EDX, r->edx, h);
+	rdmsr(MSR_IA32_MCG_ESI, r->esi, h);
+	rdmsr(MSR_IA32_MCG_EDI, r->edi, h);
+	rdmsr(MSR_IA32_MCG_EBP, r->ebp, h);
+	rdmsr(MSR_IA32_MCG_ESP, r->esp, h);
+	rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h);
+	rdmsr(MSR_IA32_MCG_EIP, r->eip, h);
 }
 
-static void intel_machine_check(struct pt_regs * regs, long error_code)
+static void intel_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover=1;
+	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
 	int i;
 
-	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover=0;
+		recover = 0;
 
 	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
 		smp_processor_id(), mcgsth, mcgstl);
@@ -191,20 +191,20 @@ static void intel_machine_check(struct pt_regs * regs, long error_code)
 	}
 
 	if (recover & 2)
-		panic ("CPU context corrupt");
+		panic("CPU context corrupt");
 	if (recover & 1)
-		panic ("Unable to continue");
+		panic("Unable to continue");
 
 	printk(KERN_EMERG "Attempting to continue.\n");
-	/* 
-	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+	/*
+	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
 	 * recoverable/continuable.This will allow BIOS to look at the MSRs
 	 * for errors if the OS could not log the error.
 	 */
-	for (i=0; i<nr_mce_banks; i++) {
+	for (i = 0; i < nr_mce_banks; i++) {
 		u32 msr;
 		msr = MSR_IA32_MC0_STATUS+i*4;
-		rdmsr (msr, low, high);
+		rdmsr(msr, low, high);
 		if (high&(1<<31)) {
 			/* Clear it */
 			wrmsr(msr, 0UL, 0UL);
@@ -214,7 +214,7 @@ static void intel_machine_check(struct pt_regs * regs, long error_code)
 		}
 	}
 	mcgstl &= ~(1<<2);
-	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
 
@@ -222,30 +222,30 @@ void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;
-	
+
 	machine_check_vector = intel_machine_check;
 	wmb();
 
-	printk (KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	printk(KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr(MSR_IA32_MCG_CAP, l, h);
 	if (l & (1<<8))	/* Control register present ? */
-		wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
 
-	for (i=0; i<nr_mce_banks; i++) {
-		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	for (i = 0; i < nr_mce_banks; i++) {
+		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
 	}
 
-	set_in_cr4 (X86_CR4_MCE);
-	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
 		smp_processor_id());
 
 	/* Check for P4/Xeon extended MCE MSRs */
-	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	rdmsr(MSR_IA32_MCG_CAP, l, h);
 	if (l & (1<<9))	{/* MCG_EXT_P */
 		mce_num_extended_msrs = (l >> 16) & 0xff;
-		printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
+		printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
 				" available\n",
 			smp_processor_id(), mce_num_extended_msrs);
 
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 1f4cc48c14c6..d5ae2243f0b9 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -35,6 +35,7 @@ atomic_t therm_throt_en = ATOMIC_INIT(0);
 
 #define define_therm_throt_sysdev_show_func(name)                            \
 static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,        \
+					struct sysdev_attribute *attr,	     \
                                               char *buf)                     \
 {                                                                            \
 	unsigned int cpu = dev->id;                                          \
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 5d241ce94a44..509bd3d9eacd 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -37,7 +37,7 @@ static struct fixed_range_block fixed_range_blocks[] = {
 static unsigned long smp_changes_mask;
 static struct mtrr_state mtrr_state = {};
 static int mtrr_state_set;
-static u64 tom2;
+u64 mtrr_tom2;
 
 #undef MODULE_PARAM_PREFIX
 #define MODULE_PARAM_PREFIX "mtrr."
@@ -139,8 +139,8 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 		}
 	}
 
-	if (tom2) {
-		if (start >= (1ULL<<32) && (end < tom2))
+	if (mtrr_tom2) {
+		if (start >= (1ULL<<32) && (end < mtrr_tom2))
 			return MTRR_TYPE_WRBACK;
 	}
 
@@ -158,6 +158,20 @@ get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
 	rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
 }
 
+/*  fill the MSR pair relating to a var range  */
+void fill_mtrr_var_range(unsigned int index,
+		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi)
+{
+	struct mtrr_var_range *vr;
+
+	vr = mtrr_state.var_ranges;
+
+	vr[index].base_lo = base_lo;
+	vr[index].base_hi = base_hi;
+	vr[index].mask_lo = mask_lo;
+	vr[index].mask_hi = mask_hi;
+}
+
 static void
 get_fixed_ranges(mtrr_type * frs)
 {
@@ -213,13 +227,13 @@ void __init get_mtrr_state(void)
 	mtrr_state.enabled = (lo & 0xc00) >> 10;
 
 	if (amd_special_default_mtrr()) {
-		unsigned lo, hi;
+		unsigned low, high;
 		/* TOP_MEM2 */
-		rdmsr(MSR_K8_TOP_MEM2, lo, hi);
-		tom2 = hi;
-		tom2 <<= 32;
-		tom2 |= lo;
-		tom2 &= 0xffffff8000000ULL;
+		rdmsr(MSR_K8_TOP_MEM2, low, high);
+		mtrr_tom2 = high;
+		mtrr_tom2 <<= 32;
+		mtrr_tom2 |= low;
+		mtrr_tom2 &= 0xffffff800000ULL;
 	}
 	if (mtrr_show) {
 		int high_width;
@@ -251,9 +265,9 @@ void __init get_mtrr_state(void)
 			else
 				printk(KERN_INFO "MTRR %u disabled\n", i);
 		}
-		if (tom2) {
+		if (mtrr_tom2) {
 			printk(KERN_INFO "TOM2: %016llx aka %lldM\n",
-					  tom2, tom2>>20);
+					  mtrr_tom2, mtrr_tom2>>20);
 		}
 	}
 	mtrr_state_set = 1;
@@ -328,7 +342,7 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
 
 	if (lo != msrwords[0] || hi != msrwords[1]) {
 		if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-		    boot_cpu_data.x86 == 15 &&
+		    (boot_cpu_data.x86 >= 0x0f && boot_cpu_data.x86 <= 0x11) &&
 		    ((msrwords[0] | msrwords[1]) & K8_MTRR_RDMEM_WRMEM_MASK))
 			k8_enable_fixed_iorrs();
 		mtrr_wrmsr(msr, msrwords[0], msrwords[1]);
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 6a1e278d9323..6f23969c8faf 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -37,6 +37,7 @@
 #include <linux/smp.h>
 #include <linux/cpu.h>
 #include <linux/mutex.h>
+#include <linux/sort.h>
 
 #include <asm/e820.h>
 #include <asm/mtrr.h>
@@ -222,7 +223,7 @@ static void set_mtrr(unsigned int reg, unsigned long base,
 	atomic_set(&data.gate,0);
 
 	/*  Start the ball rolling on other CPUs  */
-	if (smp_call_function(ipi_handler, &data, 1, 0) != 0)
+	if (smp_call_function(ipi_handler, &data, 0) != 0)
 		panic("mtrr: timed out waiting for other CPUs\n");
 
 	local_irq_save(flags);
@@ -609,6 +610,787 @@ static struct sysdev_driver mtrr_sysdev_driver = {
 	.resume		= mtrr_restore,
 };
 
+/* should be related to MTRR_VAR_RANGES nums */
+#define RANGE_NUM 256
+
+struct res_range {
+	unsigned long start;
+	unsigned long end;
+};
+
+static int __init
+add_range(struct res_range *range, int nr_range, unsigned long start,
+			      unsigned long end)
+{
+	/* out of slots */
+	if (nr_range >= RANGE_NUM)
+		return nr_range;
+
+	range[nr_range].start = start;
+	range[nr_range].end = end;
+
+	nr_range++;
+
+	return nr_range;
+}
+
+static int __init
+add_range_with_merge(struct res_range *range, int nr_range, unsigned long start,
+			      unsigned long end)
+{
+	int i;
+
+	/* try to merge it with old one */
+	for (i = 0; i < nr_range; i++) {
+		unsigned long final_start, final_end;
+		unsigned long common_start, common_end;
+
+		if (!range[i].end)
+			continue;
+
+		common_start = max(range[i].start, start);
+		common_end = min(range[i].end, end);
+		if (common_start > common_end + 1)
+			continue;
+
+		final_start = min(range[i].start, start);
+		final_end = max(range[i].end, end);
+
+		range[i].start = final_start;
+		range[i].end =  final_end;
+		return nr_range;
+	}
+
+	/* need to add that */
+	return add_range(range, nr_range, start, end);
+}
+
+static void __init
+subtract_range(struct res_range *range, unsigned long start, unsigned long end)
+{
+	int i, j;
+
+	for (j = 0; j < RANGE_NUM; j++) {
+		if (!range[j].end)
+			continue;
+
+		if (start <= range[j].start && end >= range[j].end) {
+			range[j].start = 0;
+			range[j].end = 0;
+			continue;
+		}
+
+		if (start <= range[j].start && end < range[j].end &&
+		    range[j].start < end + 1) {
+			range[j].start = end + 1;
+			continue;
+		}
+
+
+		if (start > range[j].start && end >= range[j].end &&
+		    range[j].end > start - 1) {
+			range[j].end = start - 1;
+			continue;
+		}
+
+		if (start > range[j].start && end < range[j].end) {
+			/* find the new spare */
+			for (i = 0; i < RANGE_NUM; i++) {
+				if (range[i].end == 0)
+					break;
+			}
+			if (i < RANGE_NUM) {
+				range[i].end = range[j].end;
+				range[i].start = end + 1;
+			} else {
+				printk(KERN_ERR "run of slot in ranges\n");
+			}
+			range[j].end = start - 1;
+			continue;
+		}
+	}
+}
+
+static int __init cmp_range(const void *x1, const void *x2)
+{
+	const struct res_range *r1 = x1;
+	const struct res_range *r2 = x2;
+	long start1, start2;
+
+	start1 = r1->start;
+	start2 = r2->start;
+
+	return start1 - start2;
+}
+
+struct var_mtrr_range_state {
+	unsigned long base_pfn;
+	unsigned long size_pfn;
+	mtrr_type type;
+};
+
+struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
+static int __initdata debug_print;
+
+static int __init
+x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
+		       unsigned long extra_remove_base,
+		       unsigned long extra_remove_size)
+{
+	unsigned long i, base, size;
+	mtrr_type type;
+
+	for (i = 0; i < num_var_ranges; i++) {
+		type = range_state[i].type;
+		if (type != MTRR_TYPE_WRBACK)
+			continue;
+		base = range_state[i].base_pfn;
+		size = range_state[i].size_pfn;
+		nr_range = add_range_with_merge(range, nr_range, base,
+						base + size - 1);
+	}
+	if (debug_print) {
+		printk(KERN_DEBUG "After WB checking\n");
+		for (i = 0; i < nr_range; i++)
+			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
+				 range[i].start, range[i].end + 1);
+	}
+
+	/* take out UC ranges */
+	for (i = 0; i < num_var_ranges; i++) {
+		type = range_state[i].type;
+		if (type != MTRR_TYPE_UNCACHABLE)
+			continue;
+		size = range_state[i].size_pfn;
+		if (!size)
+			continue;
+		base = range_state[i].base_pfn;
+		subtract_range(range, base, base + size - 1);
+	}
+	if (extra_remove_size)
+		subtract_range(range, extra_remove_base,
+				 extra_remove_base + extra_remove_size  - 1);
+
+	/* get new range num */
+	nr_range = 0;
+	for (i = 0; i < RANGE_NUM; i++) {
+		if (!range[i].end)
+			continue;
+		nr_range++;
+	}
+	if  (debug_print) {
+		printk(KERN_DEBUG "After UC checking\n");
+		for (i = 0; i < nr_range; i++)
+			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
+				 range[i].start, range[i].end + 1);
+	}
+
+	/* sort the ranges */
+	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+	if  (debug_print) {
+		printk(KERN_DEBUG "After sorting\n");
+		for (i = 0; i < nr_range; i++)
+			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
+				 range[i].start, range[i].end + 1);
+	}
+
+	/* clear those is not used */
+	for (i = nr_range; i < RANGE_NUM; i++)
+		memset(&range[i], 0, sizeof(range[i]));
+
+	return nr_range;
+}
+
+static struct res_range __initdata range[RANGE_NUM];
+
+#ifdef CONFIG_MTRR_SANITIZER
+
+static unsigned long __init sum_ranges(struct res_range *range, int nr_range)
+{
+	unsigned long sum;
+	int i;
+
+	sum = 0;
+	for (i = 0; i < nr_range; i++)
+		sum += range[i].end + 1 - range[i].start;
+
+	return sum;
+}
+
+static int enable_mtrr_cleanup __initdata =
+	CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT;
+
+static int __init disable_mtrr_cleanup_setup(char *str)
+{
+	if (enable_mtrr_cleanup != -1)
+		enable_mtrr_cleanup = 0;
+	return 0;
+}
+early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup);
+
+static int __init enable_mtrr_cleanup_setup(char *str)
+{
+	if (enable_mtrr_cleanup != -1)
+		enable_mtrr_cleanup = 1;
+	return 0;
+}
+early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup);
+
+struct var_mtrr_state {
+	unsigned long	range_startk;
+	unsigned long	range_sizek;
+	unsigned long	chunk_sizek;
+	unsigned long	gran_sizek;
+	unsigned int	reg;
+};
+
+static void __init
+set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
+		unsigned char type, unsigned int address_bits)
+{
+	u32 base_lo, base_hi, mask_lo, mask_hi;
+	u64 base, mask;
+
+	if (!sizek) {
+		fill_mtrr_var_range(reg, 0, 0, 0, 0);
+		return;
+	}
+
+	mask = (1ULL << address_bits) - 1;
+	mask &= ~((((u64)sizek) << 10) - 1);
+
+	base  = ((u64)basek) << 10;
+
+	base |= type;
+	mask |= 0x800;
+
+	base_lo = base & ((1ULL<<32) - 1);
+	base_hi = base >> 32;
+
+	mask_lo = mask & ((1ULL<<32) - 1);
+	mask_hi = mask >> 32;
+
+	fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi);
+}
+
+static void __init
+save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
+		unsigned char type)
+{
+	range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10);
+	range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10);
+	range_state[reg].type = type;
+}
+
+static void __init
+set_var_mtrr_all(unsigned int address_bits)
+{
+	unsigned long basek, sizek;
+	unsigned char type;
+	unsigned int reg;
+
+	for (reg = 0; reg < num_var_ranges; reg++) {
+		basek = range_state[reg].base_pfn << (PAGE_SHIFT - 10);
+		sizek = range_state[reg].size_pfn << (PAGE_SHIFT - 10);
+		type = range_state[reg].type;
+
+		set_var_mtrr(reg, basek, sizek, type, address_bits);
+	}
+}
+
+static unsigned int __init
+range_to_mtrr(unsigned int reg, unsigned long range_startk,
+	      unsigned long range_sizek, unsigned char type)
+{
+	if (!range_sizek || (reg >= num_var_ranges))
+		return reg;
+
+	while (range_sizek) {
+		unsigned long max_align, align;
+		unsigned long sizek;
+
+		/* Compute the maximum size I can make a range */
+		if (range_startk)
+			max_align = ffs(range_startk) - 1;
+		else
+			max_align = 32;
+		align = fls(range_sizek) - 1;
+		if (align > max_align)
+			align = max_align;
+
+		sizek = 1 << align;
+		if (debug_print)
+			printk(KERN_DEBUG "Setting variable MTRR %d, "
+				"base: %ldMB, range: %ldMB, type %s\n",
+				reg, range_startk >> 10, sizek >> 10,
+				(type == MTRR_TYPE_UNCACHABLE)?"UC":
+				    ((type == MTRR_TYPE_WRBACK)?"WB":"Other")
+				);
+		save_var_mtrr(reg++, range_startk, sizek, type);
+		range_startk += sizek;
+		range_sizek -= sizek;
+		if (reg >= num_var_ranges)
+			break;
+	}
+	return reg;
+}
+
+static unsigned __init
+range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
+			unsigned long sizek)
+{
+	unsigned long hole_basek, hole_sizek;
+	unsigned long second_basek, second_sizek;
+	unsigned long range0_basek, range0_sizek;
+	unsigned long range_basek, range_sizek;
+	unsigned long chunk_sizek;
+	unsigned long gran_sizek;
+
+	hole_basek = 0;
+	hole_sizek = 0;
+	second_basek = 0;
+	second_sizek = 0;
+	chunk_sizek = state->chunk_sizek;
+	gran_sizek = state->gran_sizek;
+
+	/* align with gran size, prevent small block used up MTRRs */
+	range_basek = ALIGN(state->range_startk, gran_sizek);
+	if ((range_basek > basek) && basek)
+		return second_sizek;
+	state->range_sizek -= (range_basek - state->range_startk);
+	range_sizek = ALIGN(state->range_sizek, gran_sizek);
+
+	while (range_sizek > state->range_sizek) {
+		range_sizek -= gran_sizek;
+		if (!range_sizek)
+			return 0;
+	}
+	state->range_sizek = range_sizek;
+
+	/* try to append some small hole */
+	range0_basek = state->range_startk;
+	range0_sizek = ALIGN(state->range_sizek, chunk_sizek);
+	if (range0_sizek == state->range_sizek) {
+		if (debug_print)
+			printk(KERN_DEBUG "rangeX: %016lx - %016lx\n",
+				range0_basek<<10,
+				(range0_basek + state->range_sizek)<<10);
+		state->reg = range_to_mtrr(state->reg, range0_basek,
+				state->range_sizek, MTRR_TYPE_WRBACK);
+		return 0;
+	}
+
+	range0_sizek -= chunk_sizek;
+	if (range0_sizek && sizek) {
+	    while (range0_basek + range0_sizek > (basek + sizek)) {
+		range0_sizek -= chunk_sizek;
+		if (!range0_sizek)
+			break;
+	    }
+	}
+
+	if (range0_sizek) {
+		if (debug_print)
+			printk(KERN_DEBUG "range0: %016lx - %016lx\n",
+				range0_basek<<10,
+				(range0_basek + range0_sizek)<<10);
+		state->reg = range_to_mtrr(state->reg, range0_basek,
+				range0_sizek, MTRR_TYPE_WRBACK);
+
+	}
+
+	range_basek = range0_basek + range0_sizek;
+	range_sizek = chunk_sizek;
+
+	if (range_basek + range_sizek > basek &&
+	    range_basek + range_sizek <= (basek + sizek)) {
+		/* one hole */
+		second_basek = basek;
+		second_sizek = range_basek + range_sizek - basek;
+	}
+
+	/* if last piece, only could one hole near end */
+	if ((second_basek || !basek) &&
+	    range_sizek - (state->range_sizek - range0_sizek) - second_sizek <
+	    (chunk_sizek >> 1)) {
+		/*
+		 * one hole in middle (second_sizek is 0) or at end
+		 * (second_sizek is 0 )
+		 */
+		hole_sizek = range_sizek - (state->range_sizek - range0_sizek)
+				 - second_sizek;
+		hole_basek = range_basek + range_sizek - hole_sizek
+				 - second_sizek;
+	} else {
+		/* fallback for big hole, or several holes */
+		range_sizek = state->range_sizek - range0_sizek;
+		second_basek = 0;
+		second_sizek = 0;
+	}
+
+	if (debug_print)
+		printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10,
+			 (range_basek + range_sizek)<<10);
+	state->reg = range_to_mtrr(state->reg, range_basek, range_sizek,
+					 MTRR_TYPE_WRBACK);
+	if (hole_sizek) {
+		if (debug_print)
+			printk(KERN_DEBUG "hole: %016lx - %016lx\n",
+				 hole_basek<<10, (hole_basek + hole_sizek)<<10);
+		state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek,
+						 MTRR_TYPE_UNCACHABLE);
+
+	}
+
+	return second_sizek;
+}
+
+static void __init
+set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn,
+		   unsigned long size_pfn)
+{
+	unsigned long basek, sizek;
+	unsigned long second_sizek = 0;
+
+	if (state->reg >= num_var_ranges)
+		return;
+
+	basek = base_pfn << (PAGE_SHIFT - 10);
+	sizek = size_pfn << (PAGE_SHIFT - 10);
+
+	/* See if I can merge with the last range */
+	if ((basek <= 1024) ||
+	    (state->range_startk + state->range_sizek == basek)) {
+		unsigned long endk = basek + sizek;
+		state->range_sizek = endk - state->range_startk;
+		return;
+	}
+	/* Write the range mtrrs */
+	if (state->range_sizek != 0)
+		second_sizek = range_to_mtrr_with_hole(state, basek, sizek);
+
+	/* Allocate an msr */
+	state->range_startk = basek + second_sizek;
+	state->range_sizek  = sizek - second_sizek;
+}
+
+/* mininum size of mtrr block that can take hole */
+static u64 mtrr_chunk_size __initdata = (256ULL<<20);
+
+static int __init parse_mtrr_chunk_size_opt(char *p)
+{
+	if (!p)
+		return -EINVAL;
+	mtrr_chunk_size = memparse(p, &p);
+	return 0;
+}
+early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt);
+
+/* granity of mtrr of block */
+static u64 mtrr_gran_size __initdata;
+
+static int __init parse_mtrr_gran_size_opt(char *p)
+{
+	if (!p)
+		return -EINVAL;
+	mtrr_gran_size = memparse(p, &p);
+	return 0;
+}
+early_param("mtrr_gran_size", parse_mtrr_gran_size_opt);
+
+static int nr_mtrr_spare_reg __initdata =
+				 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT;
+
+static int __init parse_mtrr_spare_reg(char *arg)
+{
+	if (arg)
+		nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0);
+	return 0;
+}
+
+early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg);
+
+static int __init
+x86_setup_var_mtrrs(struct res_range *range, int nr_range,
+		    u64 chunk_size, u64 gran_size)
+{
+	struct var_mtrr_state var_state;
+	int i;
+	int num_reg;
+
+	var_state.range_startk	= 0;
+	var_state.range_sizek	= 0;
+	var_state.reg		= 0;
+	var_state.chunk_sizek	= chunk_size >> 10;
+	var_state.gran_sizek	= gran_size >> 10;
+
+	memset(range_state, 0, sizeof(range_state));
+
+	/* Write the range etc */
+	for (i = 0; i < nr_range; i++)
+		set_var_mtrr_range(&var_state, range[i].start,
+				   range[i].end - range[i].start + 1);
+
+	/* Write the last range */
+	if (var_state.range_sizek != 0)
+		range_to_mtrr_with_hole(&var_state, 0, 0);
+
+	num_reg = var_state.reg;
+	/* Clear out the extra MTRR's */
+	while (var_state.reg < num_var_ranges) {
+		save_var_mtrr(var_state.reg, 0, 0, 0);
+		var_state.reg++;
+	}
+
+	return num_reg;
+}
+
+struct mtrr_cleanup_result {
+	unsigned long gran_sizek;
+	unsigned long chunk_sizek;
+	unsigned long lose_cover_sizek;
+	unsigned int num_reg;
+	int bad;
+};
+
+/*
+ * gran_size: 1M, 2M, ..., 2G
+ * chunk size: gran_size, ..., 4G
+ * so we need (2+13)*6
+ */
+#define NUM_RESULT	90
+#define PSHIFT		(PAGE_SHIFT - 10)
+
+static struct mtrr_cleanup_result __initdata result[NUM_RESULT];
+static struct res_range __initdata range_new[RANGE_NUM];
+static unsigned long __initdata min_loss_pfn[RANGE_NUM];
+
+static int __init mtrr_cleanup(unsigned address_bits)
+{
+	unsigned long extra_remove_base, extra_remove_size;
+	unsigned long i, base, size, def, dummy;
+	mtrr_type type;
+	int nr_range, nr_range_new;
+	u64 chunk_size, gran_size;
+	unsigned long range_sums, range_sums_new;
+	int index_good;
+	int num_reg_good;
+
+	/* extra one for all 0 */
+	int num[MTRR_NUM_TYPES + 1];
+
+	if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1)
+		return 0;
+	rdmsr(MTRRdefType_MSR, def, dummy);
+	def &= 0xff;
+	if (def != MTRR_TYPE_UNCACHABLE)
+		return 0;
+
+	/* get it and store it aside */
+	memset(range_state, 0, sizeof(range_state));
+	for (i = 0; i < num_var_ranges; i++) {
+		mtrr_if->get(i, &base, &size, &type);
+		range_state[i].base_pfn = base;
+		range_state[i].size_pfn = size;
+		range_state[i].type = type;
+	}
+
+	/* check entries number */
+	memset(num, 0, sizeof(num));
+	for (i = 0; i < num_var_ranges; i++) {
+		type = range_state[i].type;
+		size = range_state[i].size_pfn;
+		if (type >= MTRR_NUM_TYPES)
+			continue;
+		if (!size)
+			type = MTRR_NUM_TYPES;
+		num[type]++;
+	}
+
+	/* check if we got UC entries */
+	if (!num[MTRR_TYPE_UNCACHABLE])
+		return 0;
+
+	/* check if we only had WB and UC */
+	if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
+		num_var_ranges - num[MTRR_NUM_TYPES])
+		return 0;
+
+	memset(range, 0, sizeof(range));
+	extra_remove_size = 0;
+	if (mtrr_tom2) {
+		extra_remove_base = 1 << (32 - PAGE_SHIFT);
+		extra_remove_size =
+			(mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base;
+	}
+	nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base,
+					  extra_remove_size);
+	range_sums = sum_ranges(range, nr_range);
+	printk(KERN_INFO "total RAM coverred: %ldM\n",
+	       range_sums >> (20 - PAGE_SHIFT));
+
+	if (mtrr_chunk_size && mtrr_gran_size) {
+		int num_reg;
+
+		debug_print = 1;
+		/* convert ranges to var ranges state */
+		num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size,
+					      mtrr_gran_size);
+
+		/* we got new setting in range_state, check it */
+		memset(range_new, 0, sizeof(range_new));
+		nr_range_new = x86_get_mtrr_mem_range(range_new, 0,
+						      extra_remove_base,
+						      extra_remove_size);
+		range_sums_new = sum_ranges(range_new, nr_range_new);
+
+		i = 0;
+		result[i].chunk_sizek = mtrr_chunk_size >> 10;
+		result[i].gran_sizek = mtrr_gran_size >> 10;
+		result[i].num_reg = num_reg;
+		if (range_sums < range_sums_new) {
+			result[i].lose_cover_sizek =
+				(range_sums_new - range_sums) << PSHIFT;
+			result[i].bad = 1;
+		} else
+			result[i].lose_cover_sizek =
+				(range_sums - range_sums_new) << PSHIFT;
+
+		printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
+			 result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10,
+			 result[i].chunk_sizek >> 10);
+		printk(KERN_CONT "num_reg: %d  \tlose cover RAM: %s%ldM \n",
+			 result[i].num_reg, result[i].bad?"-":"",
+			 result[i].lose_cover_sizek >> 10);
+		if (!result[i].bad) {
+			set_var_mtrr_all(address_bits);
+			return 1;
+		}
+		printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, "
+		       "will find optimal one\n");
+		debug_print = 0;
+		memset(result, 0, sizeof(result[0]));
+	}
+
+	i = 0;
+	memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn));
+	memset(result, 0, sizeof(result));
+	for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) {
+		for (chunk_size = gran_size; chunk_size < (1ULL<<33);
+		     chunk_size <<= 1) {
+			int num_reg;
+
+			if (debug_print)
+				printk(KERN_INFO
+			       "\ngran_size: %lldM   chunk_size_size: %lldM\n",
+				       gran_size >> 20, chunk_size >> 20);
+			if (i >= NUM_RESULT)
+				continue;
+
+			/* convert ranges to var ranges state */
+			num_reg = x86_setup_var_mtrrs(range, nr_range,
+							 chunk_size, gran_size);
+
+			/* we got new setting in range_state, check it */
+			memset(range_new, 0, sizeof(range_new));
+			nr_range_new = x86_get_mtrr_mem_range(range_new, 0,
+					 extra_remove_base, extra_remove_size);
+			range_sums_new = sum_ranges(range_new, nr_range_new);
+
+			result[i].chunk_sizek = chunk_size >> 10;
+			result[i].gran_sizek = gran_size >> 10;
+			result[i].num_reg = num_reg;
+			if (range_sums < range_sums_new) {
+				result[i].lose_cover_sizek =
+					(range_sums_new - range_sums) << PSHIFT;
+				result[i].bad = 1;
+			} else
+				result[i].lose_cover_sizek =
+					(range_sums - range_sums_new) << PSHIFT;
+
+			/* double check it */
+			if (!result[i].bad && !result[i].lose_cover_sizek) {
+				if (nr_range_new != nr_range ||
+					memcmp(range, range_new, sizeof(range)))
+						result[i].bad = 1;
+			}
+
+			if (!result[i].bad && (range_sums - range_sums_new <
+					       min_loss_pfn[num_reg])) {
+				min_loss_pfn[num_reg] =
+					range_sums - range_sums_new;
+			}
+			i++;
+		}
+	}
+
+	/* print out all */
+	for (i = 0; i < NUM_RESULT; i++) {
+		printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
+		       result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10,
+		       result[i].chunk_sizek >> 10);
+		printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n",
+		       result[i].num_reg, result[i].bad?"-":"",
+		       result[i].lose_cover_sizek >> 10);
+	}
+
+	/* try to find the optimal index */
+	if (nr_mtrr_spare_reg >= num_var_ranges)
+		nr_mtrr_spare_reg = num_var_ranges - 1;
+	num_reg_good = -1;
+	for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) {
+		if (!min_loss_pfn[i]) {
+			num_reg_good = i;
+			break;
+		}
+	}
+
+	index_good = -1;
+	if (num_reg_good != -1) {
+		for (i = 0; i < NUM_RESULT; i++) {
+			if (!result[i].bad &&
+			    result[i].num_reg == num_reg_good &&
+			    !result[i].lose_cover_sizek) {
+				index_good = i;
+				break;
+			}
+		}
+	}
+
+	if (index_good != -1) {
+		printk(KERN_INFO "Found optimal setting for mtrr clean up\n");
+		i = index_good;
+		printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t",
+				result[i].gran_sizek >> 10,
+				result[i].chunk_sizek >> 10);
+		printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n",
+				result[i].num_reg,
+				result[i].lose_cover_sizek >> 10);
+		/* convert ranges to var ranges state */
+		chunk_size = result[i].chunk_sizek;
+		chunk_size <<= 10;
+		gran_size = result[i].gran_sizek;
+		gran_size <<= 10;
+		debug_print = 1;
+		x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size);
+		set_var_mtrr_all(address_bits);
+		return 1;
+	}
+
+	printk(KERN_INFO "mtrr_cleanup: can not find optimal value\n");
+	printk(KERN_INFO "please specify mtrr_gran_size/mtrr_chunk_size\n");
+
+	return 0;
+}
+#else
+static int __init mtrr_cleanup(unsigned address_bits)
+{
+	return 0;
+}
+#endif
+
+static int __initdata changed_by_mtrr_cleanup;
+
 static int disable_mtrr_trim;
 
 static int __init disable_mtrr_trim_setup(char *str)
@@ -648,6 +1430,19 @@ int __init amd_special_default_mtrr(void)
 	return 0;
 }
 
+static u64 __init real_trim_memory(unsigned long start_pfn,
+				   unsigned long limit_pfn)
+{
+	u64 trim_start, trim_size;
+	trim_start = start_pfn;
+	trim_start <<= PAGE_SHIFT;
+	trim_size = limit_pfn;
+	trim_size <<= PAGE_SHIFT;
+	trim_size -= trim_start;
+
+	return e820_update_range(trim_start, trim_size, E820_RAM,
+				E820_RESERVED);
+}
 /**
  * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs
  * @end_pfn: ending page frame number
@@ -663,8 +1458,11 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 {
 	unsigned long i, base, size, highest_pfn = 0, def, dummy;
 	mtrr_type type;
-	u64 trim_start, trim_size;
+	int nr_range;
+	u64 total_trim_size;
 
+	/* extra one for all 0 */
+	int num[MTRR_NUM_TYPES + 1];
 	/*
 	 * Make sure we only trim uncachable memory on machines that
 	 * support the Intel MTRR architecture:
@@ -676,14 +1474,22 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 	if (def != MTRR_TYPE_UNCACHABLE)
 		return 0;
 
-	if (amd_special_default_mtrr())
-		return 0;
+	/* get it and store it aside */
+	memset(range_state, 0, sizeof(range_state));
+	for (i = 0; i < num_var_ranges; i++) {
+		mtrr_if->get(i, &base, &size, &type);
+		range_state[i].base_pfn = base;
+		range_state[i].size_pfn = size;
+		range_state[i].type = type;
+	}
 
 	/* Find highest cached pfn */
 	for (i = 0; i < num_var_ranges; i++) {
-		mtrr_if->get(i, &base, &size, &type);
+		type = range_state[i].type;
 		if (type != MTRR_TYPE_WRBACK)
 			continue;
+		base = range_state[i].base_pfn;
+		size = range_state[i].size_pfn;
 		if (highest_pfn < base + size)
 			highest_pfn = base + size;
 	}
@@ -698,22 +1504,65 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 		return 0;
 	}
 
-	if (highest_pfn < end_pfn) {
+	/* check entries number */
+	memset(num, 0, sizeof(num));
+	for (i = 0; i < num_var_ranges; i++) {
+		type = range_state[i].type;
+		if (type >= MTRR_NUM_TYPES)
+			continue;
+		size = range_state[i].size_pfn;
+		if (!size)
+			type = MTRR_NUM_TYPES;
+		num[type]++;
+	}
+
+	/* no entry for WB? */
+	if (!num[MTRR_TYPE_WRBACK])
+		return 0;
+
+	/* check if we only had WB and UC */
+	if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
+		num_var_ranges - num[MTRR_NUM_TYPES])
+		return 0;
+
+	memset(range, 0, sizeof(range));
+	nr_range = 0;
+	if (mtrr_tom2) {
+		range[nr_range].start = (1ULL<<(32 - PAGE_SHIFT));
+		range[nr_range].end = (mtrr_tom2 >> PAGE_SHIFT) - 1;
+		if (highest_pfn < range[nr_range].end + 1)
+			highest_pfn = range[nr_range].end + 1;
+		nr_range++;
+	}
+	nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0);
+
+	total_trim_size = 0;
+	/* check the head */
+	if (range[0].start)
+		total_trim_size += real_trim_memory(0, range[0].start);
+	/* check the holes */
+	for (i = 0; i < nr_range - 1; i++) {
+		if (range[i].end + 1 < range[i+1].start)
+			total_trim_size += real_trim_memory(range[i].end + 1,
+							    range[i+1].start);
+	}
+	/* check the top */
+	i = nr_range - 1;
+	if (range[i].end + 1 < end_pfn)
+		total_trim_size += real_trim_memory(range[i].end + 1,
+							 end_pfn);
+
+	if (total_trim_size) {
 		printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover"
-			" all of memory, losing %luMB of RAM.\n",
-			(end_pfn - highest_pfn) >> (20 - PAGE_SHIFT));
+			" all of memory, losing %lluMB of RAM.\n",
+			total_trim_size >> 20);
 
-		WARN_ON(1);
+		if (!changed_by_mtrr_cleanup)
+			WARN_ON(1);
 
 		printk(KERN_INFO "update e820 for mtrr\n");
-		trim_start = highest_pfn;
-		trim_start <<= PAGE_SHIFT;
-		trim_size = end_pfn;
-		trim_size <<= PAGE_SHIFT;
-		trim_size -= trim_start;
-		update_memory_range(trim_start, trim_size, E820_RAM,
-					E820_RESERVED);
 		update_e820();
+
 		return 1;
 	}
 
@@ -729,18 +1578,21 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
  */
 void __init mtrr_bp_init(void)
 {
+	u32 phys_addr;
 	init_ifs();
 
+	phys_addr = 32;
+
 	if (cpu_has_mtrr) {
 		mtrr_if = &generic_mtrr_ops;
 		size_or_mask = 0xff000000;	/* 36 bits */
 		size_and_mask = 0x00f00000;
+		phys_addr = 36;
 
 		/* This is an AMD specific MSR, but we assume(hope?) that
 		   Intel will implement it to when they extend the address
 		   bus of the Xeon. */
 		if (cpuid_eax(0x80000000) >= 0x80000008) {
-			u32 phys_addr;
 			phys_addr = cpuid_eax(0x80000008) & 0xff;
 			/* CPUID workaround for Intel 0F33/0F34 CPU */
 			if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
@@ -758,6 +1610,7 @@ void __init mtrr_bp_init(void)
 			   don't support PAE */
 			size_or_mask = 0xfff00000;	/* 32 bits */
 			size_and_mask = 0;
+			phys_addr = 32;
 		}
 	} else {
 		switch (boot_cpu_data.x86_vendor) {
@@ -791,8 +1644,15 @@ void __init mtrr_bp_init(void)
 	if (mtrr_if) {
 		set_num_var_ranges();
 		init_table();
-		if (use_intel())
+		if (use_intel()) {
 			get_mtrr_state();
+
+			if (mtrr_cleanup(phys_addr)) {
+				changed_by_mtrr_cleanup = 1;
+				mtrr_if->set_all();
+			}
+
+		}
 	}
 }
 
@@ -822,16 +1682,17 @@ void mtrr_ap_init(void)
  */
 void mtrr_save_state(void)
 {
-	smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1, 1);
+	smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1);
 }
 
 static int __init mtrr_init_finialize(void)
 {
 	if (!mtrr_if)
 		return 0;
-	if (use_intel())
-		mtrr_state_warn();
-	else {
+	if (use_intel()) {
+		if (!changed_by_mtrr_cleanup)
+			mtrr_state_warn();
+	} else {
 		/* The CPUs haven't MTRR and seem to not support SMP. They have
 		 * specific drivers, we use a tricky method to support
 		 * suspend/resume for them.
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 2cc77eb6fea3..2dc4ec656b23 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -81,6 +81,8 @@ void set_mtrr_done(struct set_mtrr_context *ctxt);
 void set_mtrr_cache_disable(struct set_mtrr_context *ctxt);
 void set_mtrr_prepare_save(struct set_mtrr_context *ctxt);
 
+void fill_mtrr_var_range(unsigned int index,
+		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
 void get_mtrr_state(void);
 
 extern void set_mtrr_ops(struct mtrr_ops * ops);
@@ -92,6 +94,7 @@ extern struct mtrr_ops * mtrr_if;
 #define use_intel()	(mtrr_if && mtrr_if->use_intel_if == 1)
 
 extern unsigned int num_var_ranges;
+extern u64 mtrr_tom2;
 
 void mtrr_state_warn(void);
 const char *mtrr_attrib_to_str(int x);
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index f9ae93adffe5..de7439f82b92 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -1,11 +1,15 @@
-/* local apic based NMI watchdog for various CPUs.
-   This file also handles reservation of performance counters for coordination
-   with other users (like oprofile).
-
-   Note that these events normally don't tick when the CPU idles. This means
-   the frequency varies with CPU load.
-
-   Original code for K7/P6 written by Keith Owens */
+/*
+ * local apic based NMI watchdog for various CPUs.
+ *
+ * This file also handles reservation of performance counters for coordination
+ * with other users (like oprofile).
+ *
+ * Note that these events normally don't tick when the CPU idles. This means
+ * the frequency varies with CPU load.
+ *
+ * Original code for K7/P6 written by Keith Owens
+ *
+ */
 
 #include <linux/percpu.h>
 #include <linux/module.h>
@@ -36,12 +40,16 @@ struct wd_ops {
 
 static const struct wd_ops *wd_ops;
 
-/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
- * offset from MSR_P4_BSU_ESCR0.  It will be the max for all platforms (for now)
+/*
+ * this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
+ * offset from MSR_P4_BSU_ESCR0.
+ *
+ * It will be the max for all platforms (for now)
  */
 #define NMI_MAX_COUNTER_BITS 66
 
-/* perfctr_nmi_owner tracks the ownership of the perfctr registers:
+/*
+ * perfctr_nmi_owner tracks the ownership of the perfctr registers:
  * evtsel_nmi_owner tracks the ownership of the event selection
  * - different performance counters/ event selection may be reserved for
  *   different subsystems this reservation system just tries to coordinate
@@ -73,8 +81,10 @@ static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
 	return 0;
 }
 
-/* converts an msr to an appropriate reservation bit */
-/* returns the bit offset of the event selection register */
+/*
+ * converts an msr to an appropriate reservation bit
+ * returns the bit offset of the event selection register
+ */
 static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
 {
 	/* returns the bit offset of the event selection register */
@@ -114,6 +124,7 @@ int avail_to_resrv_perfctr_nmi(unsigned int msr)
 
 	return (!test_bit(counter, perfctr_nmi_owner));
 }
+EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
 
 int reserve_perfctr_nmi(unsigned int msr)
 {
@@ -128,6 +139,7 @@ int reserve_perfctr_nmi(unsigned int msr)
 		return 1;
 	return 0;
 }
+EXPORT_SYMBOL(reserve_perfctr_nmi);
 
 void release_perfctr_nmi(unsigned int msr)
 {
@@ -140,6 +152,7 @@ void release_perfctr_nmi(unsigned int msr)
 
 	clear_bit(counter, perfctr_nmi_owner);
 }
+EXPORT_SYMBOL(release_perfctr_nmi);
 
 int reserve_evntsel_nmi(unsigned int msr)
 {
@@ -154,6 +167,7 @@ int reserve_evntsel_nmi(unsigned int msr)
 		return 1;
 	return 0;
 }
+EXPORT_SYMBOL(reserve_evntsel_nmi);
 
 void release_evntsel_nmi(unsigned int msr)
 {
@@ -166,11 +180,6 @@ void release_evntsel_nmi(unsigned int msr)
 
 	clear_bit(counter, evntsel_nmi_owner);
 }
-
-EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
-EXPORT_SYMBOL(reserve_perfctr_nmi);
-EXPORT_SYMBOL(release_perfctr_nmi);
-EXPORT_SYMBOL(reserve_evntsel_nmi);
 EXPORT_SYMBOL(release_evntsel_nmi);
 
 void disable_lapic_nmi_watchdog(void)
@@ -180,8 +189,10 @@ void disable_lapic_nmi_watchdog(void)
 	if (atomic_read(&nmi_active) <= 0)
 		return;
 
-	on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
-	wd_ops->unreserve();
+	on_each_cpu(stop_apic_nmi_watchdog, NULL, 1);
+
+	if (wd_ops)
+		wd_ops->unreserve();
 
 	BUG_ON(atomic_read(&nmi_active) != 0);
 }
@@ -202,7 +213,7 @@ void enable_lapic_nmi_watchdog(void)
 		return;
 	}
 
-	on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
+	on_each_cpu(setup_apic_nmi_watchdog, NULL, 1);
 	touch_nmi_watchdog();
 }
 
@@ -232,31 +243,32 @@ static unsigned int adjust_for_32bit_ctr(unsigned int hz)
 	return retval;
 }
 
-static void
-write_watchdog_counter(unsigned int perfctr_msr, const char *descr, unsigned nmi_hz)
+static void write_watchdog_counter(unsigned int perfctr_msr,
+				const char *descr, unsigned nmi_hz)
 {
 	u64 count = (u64)cpu_khz * 1000;
 
 	do_div(count, nmi_hz);
 	if(descr)
-		Dprintk("setting %s to -0x%08Lx\n", descr, count);
+		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsrl(perfctr_msr, 0 - count);
 }
 
 static void write_watchdog_counter32(unsigned int perfctr_msr,
-		const char *descr, unsigned nmi_hz)
+				const char *descr, unsigned nmi_hz)
 {
 	u64 count = (u64)cpu_khz * 1000;
 
 	do_div(count, nmi_hz);
 	if(descr)
-		Dprintk("setting %s to -0x%08Lx\n", descr, count);
+		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsr(perfctr_msr, (u32)(-count), 0);
 }
 
-/* AMD K7/K8/Family10h/Family11h support. AMD keeps this interface
-   nicely stable so there is not much variety */
-
+/*
+ * AMD K7/K8/Family10h/Family11h support.
+ * AMD keeps this interface nicely stable so there is not much variety
+ */
 #define K7_EVNTSEL_ENABLE	(1 << 22)
 #define K7_EVNTSEL_INT		(1 << 20)
 #define K7_EVNTSEL_OS		(1 << 17)
@@ -289,7 +301,7 @@ static int setup_k7_watchdog(unsigned nmi_hz)
 
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  //unused
+	wd->cccr_msr = 0;  /* unused */
 	return 1;
 }
 
@@ -325,18 +337,19 @@ static void single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 }
 
 static const struct wd_ops k7_wd_ops = {
-	.reserve = single_msr_reserve,
-	.unreserve = single_msr_unreserve,
-	.setup = setup_k7_watchdog,
-	.rearm = single_msr_rearm,
-	.stop = single_msr_stop_watchdog,
-	.perfctr = MSR_K7_PERFCTR0,
-	.evntsel = MSR_K7_EVNTSEL0,
-	.checkbit = 1ULL<<47,
+	.reserve	= single_msr_reserve,
+	.unreserve	= single_msr_unreserve,
+	.setup		= setup_k7_watchdog,
+	.rearm		= single_msr_rearm,
+	.stop		= single_msr_stop_watchdog,
+	.perfctr	= MSR_K7_PERFCTR0,
+	.evntsel	= MSR_K7_EVNTSEL0,
+	.checkbit	= 1ULL << 47,
 };
 
-/* Intel Model 6 (PPro+,P2,P3,P-M,Core1) */
-
+/*
+ * Intel Model 6 (PPro+,P2,P3,P-M,Core1)
+ */
 #define P6_EVNTSEL0_ENABLE	(1 << 22)
 #define P6_EVNTSEL_INT		(1 << 20)
 #define P6_EVNTSEL_OS		(1 << 17)
@@ -372,52 +385,58 @@ static int setup_p6_watchdog(unsigned nmi_hz)
 
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  //unused
+	wd->cccr_msr = 0;  /* unused */
 	return 1;
 }
 
 static void p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
-	/* P6 based Pentium M need to re-unmask
+	/*
+	 * P6 based Pentium M need to re-unmask
 	 * the apic vector but it doesn't hurt
 	 * other P6 variant.
-	 * ArchPerfom/Core Duo also needs this */
+	 * ArchPerfom/Core Duo also needs this
+	 */
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
+
 	/* P6/ARCH_PERFMON has 32 bit counter write */
 	write_watchdog_counter32(wd->perfctr_msr, NULL,nmi_hz);
 }
 
 static const struct wd_ops p6_wd_ops = {
-	.reserve = single_msr_reserve,
-	.unreserve = single_msr_unreserve,
-	.setup = setup_p6_watchdog,
-	.rearm = p6_rearm,
-	.stop = single_msr_stop_watchdog,
-	.perfctr = MSR_P6_PERFCTR0,
-	.evntsel = MSR_P6_EVNTSEL0,
-	.checkbit = 1ULL<<39,
+	.reserve	= single_msr_reserve,
+	.unreserve	= single_msr_unreserve,
+	.setup		= setup_p6_watchdog,
+	.rearm		= p6_rearm,
+	.stop		= single_msr_stop_watchdog,
+	.perfctr	= MSR_P6_PERFCTR0,
+	.evntsel	= MSR_P6_EVNTSEL0,
+	.checkbit	= 1ULL << 39,
 };
 
-/* Intel P4 performance counters. By far the most complicated of all. */
-
-#define MSR_P4_MISC_ENABLE_PERF_AVAIL	(1<<7)
-#define P4_ESCR_EVENT_SELECT(N)	((N)<<25)
-#define P4_ESCR_OS		(1<<3)
-#define P4_ESCR_USR		(1<<2)
-#define P4_CCCR_OVF_PMI0	(1<<26)
-#define P4_CCCR_OVF_PMI1	(1<<27)
-#define P4_CCCR_THRESHOLD(N)	((N)<<20)
-#define P4_CCCR_COMPLEMENT	(1<<19)
-#define P4_CCCR_COMPARE		(1<<18)
-#define P4_CCCR_REQUIRED	(3<<16)
-#define P4_CCCR_ESCR_SELECT(N)	((N)<<13)
-#define P4_CCCR_ENABLE		(1<<12)
-#define P4_CCCR_OVF 		(1<<31)
-
-/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
-   CRU_ESCR0 (with any non-null event selector) through a complemented
-   max threshold. [IA32-Vol3, Section 14.9.9] */
+/*
+ * Intel P4 performance counters.
+ * By far the most complicated of all.
+ */
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL	(1 << 7)
+#define P4_ESCR_EVENT_SELECT(N)	((N) << 25)
+#define P4_ESCR_OS		(1 << 3)
+#define P4_ESCR_USR		(1 << 2)
+#define P4_CCCR_OVF_PMI0	(1 << 26)
+#define P4_CCCR_OVF_PMI1	(1 << 27)
+#define P4_CCCR_THRESHOLD(N)	((N) << 20)
+#define P4_CCCR_COMPLEMENT	(1 << 19)
+#define P4_CCCR_COMPARE		(1 << 18)
+#define P4_CCCR_REQUIRED	(3 << 16)
+#define P4_CCCR_ESCR_SELECT(N)	((N) << 13)
+#define P4_CCCR_ENABLE		(1 << 12)
+#define P4_CCCR_OVF 		(1 << 31)
 
+/*
+ * Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+ * CRU_ESCR0 (with any non-null event selector) through a complemented
+ * max threshold. [IA32-Vol3, Section 14.9.9]
+ */
 static int setup_p4_watchdog(unsigned nmi_hz)
 {
 	unsigned int perfctr_msr, evntsel_msr, cccr_msr;
@@ -442,7 +461,8 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 #endif
 		ht_num = 0;
 
-	/* performance counters are shared resources
+	/*
+	 * performance counters are shared resources
 	 * assign each hyperthread its own set
 	 * (re-use the ESCR0 register, seems safe
 	 * and keeps the cccr_val the same)
@@ -540,20 +560,21 @@ static void p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 }
 
 static const struct wd_ops p4_wd_ops = {
-	.reserve = p4_reserve,
-	.unreserve = p4_unreserve,
-	.setup = setup_p4_watchdog,
-	.rearm = p4_rearm,
-	.stop = stop_p4_watchdog,
+	.reserve	= p4_reserve,
+	.unreserve	= p4_unreserve,
+	.setup		= setup_p4_watchdog,
+	.rearm		= p4_rearm,
+	.stop		= stop_p4_watchdog,
 	/* RED-PEN this is wrong for the other sibling */
-	.perfctr = MSR_P4_BPU_PERFCTR0,
-	.evntsel = MSR_P4_BSU_ESCR0,
-	.checkbit = 1ULL<<39,
+	.perfctr	= MSR_P4_BPU_PERFCTR0,
+	.evntsel	= MSR_P4_BSU_ESCR0,
+	.checkbit	= 1ULL << 39,
 };
 
-/* Watchdog using the Intel architected PerfMon. Used for Core2 and hopefully
-   all future Intel CPUs. */
-
+/*
+ * Watchdog using the Intel architected PerfMon.
+ * Used for Core2 and hopefully all future Intel CPUs.
+ */
 #define ARCH_PERFMON_NMI_EVENT_SEL	ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
 #define ARCH_PERFMON_NMI_EVENT_UMASK	ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
 
@@ -599,19 +620,19 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz)
 
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  //unused
+	wd->cccr_msr = 0;  /* unused */
 	intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1);
 	return 1;
 }
 
 static struct wd_ops intel_arch_wd_ops __read_mostly = {
-	.reserve = single_msr_reserve,
-	.unreserve = single_msr_unreserve,
-	.setup = setup_intel_arch_watchdog,
-	.rearm = p6_rearm,
-	.stop = single_msr_stop_watchdog,
-	.perfctr = MSR_ARCH_PERFMON_PERFCTR1,
-	.evntsel = MSR_ARCH_PERFMON_EVENTSEL1,
+	.reserve	= single_msr_reserve,
+	.unreserve	= single_msr_unreserve,
+	.setup		= setup_intel_arch_watchdog,
+	.rearm		= p6_rearm,
+	.stop		= single_msr_stop_watchdog,
+	.perfctr	= MSR_ARCH_PERFMON_PERFCTR1,
+	.evntsel	= MSR_ARCH_PERFMON_EVENTSEL1,
 };
 
 static void probe_nmi_watchdog(void)
@@ -624,8 +645,10 @@ static void probe_nmi_watchdog(void)
 		wd_ops = &k7_wd_ops;
 		break;
 	case X86_VENDOR_INTEL:
-		/* Work around Core Duo (Yonah) errata AE49 where perfctr1
-		   doesn't have a working enable bit. */
+		/*
+		 * Work around Core Duo (Yonah) errata AE49 where perfctr1
+		 * doesn't have a working enable bit.
+		 */
 		if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) {
 			intel_arch_wd_ops.perfctr = MSR_ARCH_PERFMON_PERFCTR0;
 			intel_arch_wd_ops.evntsel = MSR_ARCH_PERFMON_EVENTSEL0;
@@ -636,7 +659,7 @@ static void probe_nmi_watchdog(void)
 		}
 		switch (boot_cpu_data.x86) {
 		case 6:
-			if (boot_cpu_data.x86_model > 0xd)
+			if (boot_cpu_data.x86_model > 13)
 				return;
 
 			wd_ops = &p6_wd_ops;
@@ -697,10 +720,11 @@ int lapic_wd_event(unsigned nmi_hz)
 {
 	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
 	u64 ctr;
+
 	rdmsrl(wd->perfctr_msr, ctr);
-	if (ctr & wd_ops->checkbit) { /* perfctr still running? */
+	if (ctr & wd_ops->checkbit) /* perfctr still running? */
 		return 0;
-	}
+
 	wd_ops->rearm(wd, nmi_hz);
 	return 1;
 }
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 0d0d9057e7c0..a26c480b9491 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -160,7 +160,7 @@ static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
 		*pos = first_cpu(cpu_online_map);
-	if ((*pos) < NR_CPUS && cpu_online(*pos))
+	if ((*pos) < nr_cpu_ids && cpu_online(*pos))
 		return &cpu_data(*pos);
 	return NULL;
 }
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index daff52a62248..14b11b3be31c 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -33,6 +33,7 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/smp.h>
+#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/smp_lock.h>
@@ -95,7 +96,7 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	for (; count; count -= 16) {
 		cmd.eax = pos;
 		cmd.ecx = pos >> 32;
-		smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1, 1);
+		smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
 		if (copy_to_user(tmp, &cmd, 16))
 			return -EFAULT;
 		tmp += 16;
@@ -107,15 +108,23 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 
 static int cpuid_open(struct inode *inode, struct file *file)
 {
-	unsigned int cpu = iminor(file->f_path.dentry->d_inode);
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-
-	if (cpu >= NR_CPUS || !cpu_online(cpu))
-		return -ENXIO;	/* No such CPU */
+	unsigned int cpu;
+	struct cpuinfo_x86 *c;
+	int ret = 0;
+	
+	lock_kernel();
+
+	cpu = iminor(file->f_path.dentry->d_inode);
+	if (cpu >= NR_CPUS || !cpu_online(cpu)) {
+		ret = -ENXIO;	/* No such CPU */
+		goto out;
+	}
+	c = &cpu_data(cpu);
 	if (c->cpuid_level < 0)
-		return -EIO;	/* CPUID not supported */
-
-	return 0;
+		ret = -EIO;	/* CPUID not supported */
+out:
+	unlock_kernel();
+	return ret;
 }
 
 /*
@@ -132,8 +141,8 @@ static __cpuinit int cpuid_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
-			    "cpu%d", cpu);
+	dev = device_create_drvdata(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
+				    NULL, "cpu%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
new file mode 100644
index 000000000000..9af89078f7bb
--- /dev/null
+++ b/arch/x86/kernel/e820.c
@@ -0,0 +1,1365 @@
+/*
+ * Handle the memory map.
+ * The functions here do the job until bootmem takes over.
+ *
+ *  Getting sanitize_e820_map() in sync with i386 version by applying change:
+ *  -  Provisions for empty E820 memory regions (reported by certain BIOSes).
+ *     Alex Achenbach <xela@slit.de>, December 2002.
+ *  Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/kexec.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <linux/suspend.h>
+#include <linux/firmware-map.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/e820.h>
+#include <asm/proto.h>
+#include <asm/setup.h>
+#include <asm/trampoline.h>
+
+/*
+ * The e820 map is the map that gets modified e.g. with command line parameters
+ * and that is also registered with modifications in the kernel resource tree
+ * with the iomem_resource as parent.
+ *
+ * The e820_saved is directly saved after the BIOS-provided memory map is
+ * copied. It doesn't get modified afterwards. It's registered for the
+ * /sys/firmware/memmap interface.
+ *
+ * That memory map is not modified and is used as base for kexec. The kexec'd
+ * kernel should get the same memory map as the firmware provides. Then the
+ * user can e.g. boot the original kernel with mem=1G while still booting the
+ * next kernel with full memory.
+ */
+struct e820map e820;
+struct e820map e820_saved;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0xaeedbabe;
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL(pci_mem_start);
+#endif
+
+/*
+ * This function checks if any part of the range <start,end> is mapped
+ * with type.
+ */
+int
+e820_any_mapped(u64 start, u64 end, unsigned type)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+
+		if (type && ei->type != type)
+			continue;
+		if (ei->addr >= end || ei->addr + ei->size <= start)
+			continue;
+		return 1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(e820_any_mapped);
+
+/*
+ * This function checks if the entire range <start,end> is mapped with type.
+ *
+ * Note: this function only works correct if the e820 table is sorted and
+ * not-overlapping, which is the case
+ */
+int __init e820_all_mapped(u64 start, u64 end, unsigned type)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+
+		if (type && ei->type != type)
+			continue;
+		/* is the region (part) in overlap with the current region ?*/
+		if (ei->addr >= end || ei->addr + ei->size <= start)
+			continue;
+
+		/* if the region is at the beginning of <start,end> we move
+		 * start to the end of the region since it's ok until there
+		 */
+		if (ei->addr <= start)
+			start = ei->addr + ei->size;
+		/*
+		 * if start is now at or beyond end, we're done, full
+		 * coverage
+		 */
+		if (start >= end)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * Add a memory region to the kernel e820 map.
+ */
+void __init e820_add_region(u64 start, u64 size, int type)
+{
+	int x = e820.nr_map;
+
+	if (x == ARRAY_SIZE(e820.map)) {
+		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+		return;
+	}
+
+	e820.map[x].addr = start;
+	e820.map[x].size = size;
+	e820.map[x].type = type;
+	e820.nr_map++;
+}
+
+void __init e820_print_map(char *who)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
+		       (unsigned long long) e820.map[i].addr,
+		       (unsigned long long)
+		       (e820.map[i].addr + e820.map[i].size));
+		switch (e820.map[i].type) {
+		case E820_RAM:
+		case E820_RESERVED_KERN:
+			printk(KERN_CONT "(usable)\n");
+			break;
+		case E820_RESERVED:
+			printk(KERN_CONT "(reserved)\n");
+			break;
+		case E820_ACPI:
+			printk(KERN_CONT "(ACPI data)\n");
+			break;
+		case E820_NVS:
+			printk(KERN_CONT "(ACPI NVS)\n");
+			break;
+		default:
+			printk(KERN_CONT "type %u\n", e820.map[i].type);
+			break;
+		}
+	}
+}
+
+/*
+ * Sanitize the BIOS e820 map.
+ *
+ * Some e820 responses include overlapping entries. The following
+ * replaces the original e820 map with a new one, removing overlaps,
+ * and resolving conflicting memory types in favor of highest
+ * numbered type.
+ *
+ * The input parameter biosmap points to an array of 'struct
+ * e820entry' which on entry has elements in the range [0, *pnr_map)
+ * valid, and which has space for up to max_nr_map entries.
+ * On return, the resulting sanitized e820 map entries will be in
+ * overwritten in the same location, starting at biosmap.
+ *
+ * The integer pointed to by pnr_map must be valid on entry (the
+ * current number of valid entries located at biosmap) and will
+ * be updated on return, with the new number of valid entries
+ * (something no more than max_nr_map.)
+ *
+ * The return value from sanitize_e820_map() is zero if it
+ * successfully 'sanitized' the map entries passed in, and is -1
+ * if it did nothing, which can happen if either of (1) it was
+ * only passed one map entry, or (2) any of the input map entries
+ * were invalid (start + size < start, meaning that the size was
+ * so big the described memory range wrapped around through zero.)
+ *
+ *	Visually we're performing the following
+ *	(1,2,3,4 = memory types)...
+ *
+ *	Sample memory map (w/overlaps):
+ *	   ____22__________________
+ *	   ______________________4_
+ *	   ____1111________________
+ *	   _44_____________________
+ *	   11111111________________
+ *	   ____________________33__
+ *	   ___________44___________
+ *	   __________33333_________
+ *	   ______________22________
+ *	   ___________________2222_
+ *	   _________111111111______
+ *	   _____________________11_
+ *	   _________________4______
+ *
+ *	Sanitized equivalent (no overlap):
+ *	   1_______________________
+ *	   _44_____________________
+ *	   ___1____________________
+ *	   ____22__________________
+ *	   ______11________________
+ *	   _________1______________
+ *	   __________3_____________
+ *	   ___________44___________
+ *	   _____________33_________
+ *	   _______________2________
+ *	   ________________1_______
+ *	   _________________4______
+ *	   ___________________2____
+ *	   ____________________33__
+ *	   ______________________4_
+ */
+
+int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map,
+				int *pnr_map)
+{
+	struct change_member {
+		struct e820entry *pbios; /* pointer to original bios entry */
+		unsigned long long addr; /* address for this change point */
+	};
+	static struct change_member change_point_list[2*E820_X_MAX] __initdata;
+	static struct change_member *change_point[2*E820_X_MAX] __initdata;
+	static struct e820entry *overlap_list[E820_X_MAX] __initdata;
+	static struct e820entry new_bios[E820_X_MAX] __initdata;
+	struct change_member *change_tmp;
+	unsigned long current_type, last_type;
+	unsigned long long last_addr;
+	int chgidx, still_changing;
+	int overlap_entries;
+	int new_bios_entry;
+	int old_nr, new_nr, chg_nr;
+	int i;
+
+	/* if there's only one memory region, don't bother */
+	if (*pnr_map < 2)
+		return -1;
+
+	old_nr = *pnr_map;
+	BUG_ON(old_nr > max_nr_map);
+
+	/* bail out if we find any unreasonable addresses in bios map */
+	for (i = 0; i < old_nr; i++)
+		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
+			return -1;
+
+	/* create pointers for initial change-point information (for sorting) */
+	for (i = 0; i < 2 * old_nr; i++)
+		change_point[i] = &change_point_list[i];
+
+	/* record all known change-points (starting and ending addresses),
+	   omitting those that are for empty memory regions */
+	chgidx = 0;
+	for (i = 0; i < old_nr; i++)	{
+		if (biosmap[i].size != 0) {
+			change_point[chgidx]->addr = biosmap[i].addr;
+			change_point[chgidx++]->pbios = &biosmap[i];
+			change_point[chgidx]->addr = biosmap[i].addr +
+				biosmap[i].size;
+			change_point[chgidx++]->pbios = &biosmap[i];
+		}
+	}
+	chg_nr = chgidx;
+
+	/* sort change-point list by memory addresses (low -> high) */
+	still_changing = 1;
+	while (still_changing)	{
+		still_changing = 0;
+		for (i = 1; i < chg_nr; i++)  {
+			unsigned long long curaddr, lastaddr;
+			unsigned long long curpbaddr, lastpbaddr;
+
+			curaddr = change_point[i]->addr;
+			lastaddr = change_point[i - 1]->addr;
+			curpbaddr = change_point[i]->pbios->addr;
+			lastpbaddr = change_point[i - 1]->pbios->addr;
+
+			/*
+			 * swap entries, when:
+			 *
+			 * curaddr > lastaddr or
+			 * curaddr == lastaddr and curaddr == curpbaddr and
+			 * lastaddr != lastpbaddr
+			 */
+			if (curaddr < lastaddr ||
+			    (curaddr == lastaddr && curaddr == curpbaddr &&
+			     lastaddr != lastpbaddr)) {
+				change_tmp = change_point[i];
+				change_point[i] = change_point[i-1];
+				change_point[i-1] = change_tmp;
+				still_changing = 1;
+			}
+		}
+	}
+
+	/* create a new bios memory map, removing overlaps */
+	overlap_entries = 0;	 /* number of entries in the overlap table */
+	new_bios_entry = 0;	 /* index for creating new bios map entries */
+	last_type = 0;		 /* start with undefined memory type */
+	last_addr = 0;		 /* start with 0 as last starting address */
+
+	/* loop through change-points, determining affect on the new bios map */
+	for (chgidx = 0; chgidx < chg_nr; chgidx++) {
+		/* keep track of all overlapping bios entries */
+		if (change_point[chgidx]->addr ==
+		    change_point[chgidx]->pbios->addr) {
+			/*
+			 * add map entry to overlap list (> 1 entry
+			 * implies an overlap)
+			 */
+			overlap_list[overlap_entries++] =
+				change_point[chgidx]->pbios;
+		} else {
+			/*
+			 * remove entry from list (order independent,
+			 * so swap with last)
+			 */
+			for (i = 0; i < overlap_entries; i++) {
+				if (overlap_list[i] ==
+				    change_point[chgidx]->pbios)
+					overlap_list[i] =
+						overlap_list[overlap_entries-1];
+			}
+			overlap_entries--;
+		}
+		/*
+		 * if there are overlapping entries, decide which
+		 * "type" to use (larger value takes precedence --
+		 * 1=usable, 2,3,4,4+=unusable)
+		 */
+		current_type = 0;
+		for (i = 0; i < overlap_entries; i++)
+			if (overlap_list[i]->type > current_type)
+				current_type = overlap_list[i]->type;
+		/*
+		 * continue building up new bios map based on this
+		 * information
+		 */
+		if (current_type != last_type)	{
+			if (last_type != 0)	 {
+				new_bios[new_bios_entry].size =
+					change_point[chgidx]->addr - last_addr;
+				/*
+				 * move forward only if the new size
+				 * was non-zero
+				 */
+				if (new_bios[new_bios_entry].size != 0)
+					/*
+					 * no more space left for new
+					 * bios entries ?
+					 */
+					if (++new_bios_entry >= max_nr_map)
+						break;
+			}
+			if (current_type != 0)	{
+				new_bios[new_bios_entry].addr =
+					change_point[chgidx]->addr;
+				new_bios[new_bios_entry].type = current_type;
+				last_addr = change_point[chgidx]->addr;
+			}
+			last_type = current_type;
+		}
+	}
+	/* retain count for new bios entries */
+	new_nr = new_bios_entry;
+
+	/* copy new bios mapping into original location */
+	memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
+	*pnr_map = new_nr;
+
+	return 0;
+}
+
+static int __init __append_e820_map(struct e820entry *biosmap, int nr_map)
+{
+	while (nr_map) {
+		u64 start = biosmap->addr;
+		u64 size = biosmap->size;
+		u64 end = start + size;
+		u32 type = biosmap->type;
+
+		/* Overflow in 64 bits? Ignore the memory map. */
+		if (start > end)
+			return -1;
+
+		e820_add_region(start, size, type);
+
+		biosmap++;
+		nr_map--;
+	}
+	return 0;
+}
+
+/*
+ * Copy the BIOS e820 map into a safe place.
+ *
+ * Sanity-check it while we're at it..
+ *
+ * If we're lucky and live on a modern system, the setup code
+ * will have given us a memory map that we can use to properly
+ * set up memory.  If we aren't, we'll fake a memory map.
+ */
+static int __init append_e820_map(struct e820entry *biosmap, int nr_map)
+{
+	/* Only one memory region (or negative)? Ignore it */
+	if (nr_map < 2)
+		return -1;
+
+	return __append_e820_map(biosmap, nr_map);
+}
+
+static u64 __init e820_update_range_map(struct e820map *e820x, u64 start,
+					u64 size, unsigned old_type,
+					unsigned new_type)
+{
+	int i;
+	u64 real_updated_size = 0;
+
+	BUG_ON(old_type == new_type);
+
+	if (size > (ULLONG_MAX - start))
+		size = ULLONG_MAX - start;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820x->map[i];
+		u64 final_start, final_end;
+		if (ei->type != old_type)
+			continue;
+		/* totally covered? */
+		if (ei->addr >= start &&
+		    (ei->addr + ei->size) <= (start + size)) {
+			ei->type = new_type;
+			real_updated_size += ei->size;
+			continue;
+		}
+		/* partially covered */
+		final_start = max(start, ei->addr);
+		final_end = min(start + size, ei->addr + ei->size);
+		if (final_start >= final_end)
+			continue;
+		e820_add_region(final_start, final_end - final_start,
+					 new_type);
+		real_updated_size += final_end - final_start;
+
+		ei->size -= final_end - final_start;
+		if (ei->addr < final_start)
+			continue;
+		ei->addr = final_end;
+	}
+	return real_updated_size;
+}
+
+u64 __init e820_update_range(u64 start, u64 size, unsigned old_type,
+			     unsigned new_type)
+{
+	return e820_update_range_map(&e820, start, size, old_type, new_type);
+}
+
+static u64 __init e820_update_range_saved(u64 start, u64 size,
+					  unsigned old_type, unsigned new_type)
+{
+	return e820_update_range_map(&e820_saved, start, size, old_type,
+				     new_type);
+}
+
+/* make e820 not cover the range */
+u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
+			     int checktype)
+{
+	int i;
+	u64 real_removed_size = 0;
+
+	if (size > (ULLONG_MAX - start))
+		size = ULLONG_MAX - start;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		u64 final_start, final_end;
+
+		if (checktype && ei->type != old_type)
+			continue;
+		/* totally covered? */
+		if (ei->addr >= start &&
+		    (ei->addr + ei->size) <= (start + size)) {
+			real_removed_size += ei->size;
+			memset(ei, 0, sizeof(struct e820entry));
+			continue;
+		}
+		/* partially covered */
+		final_start = max(start, ei->addr);
+		final_end = min(start + size, ei->addr + ei->size);
+		if (final_start >= final_end)
+			continue;
+		real_removed_size += final_end - final_start;
+
+		ei->size -= final_end - final_start;
+		if (ei->addr < final_start)
+			continue;
+		ei->addr = final_end;
+	}
+	return real_removed_size;
+}
+
+void __init update_e820(void)
+{
+	int nr_map;
+
+	nr_map = e820.nr_map;
+	if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map))
+		return;
+	e820.nr_map = nr_map;
+	printk(KERN_INFO "modified physical RAM map:\n");
+	e820_print_map("modified");
+}
+static void __init update_e820_saved(void)
+{
+	int nr_map;
+
+	nr_map = e820_saved.nr_map;
+	if (sanitize_e820_map(e820_saved.map, ARRAY_SIZE(e820_saved.map), &nr_map))
+		return;
+	e820_saved.nr_map = nr_map;
+}
+#define MAX_GAP_END 0x100000000ull
+/*
+ * Search for a gap in the e820 memory space from start_addr to end_addr.
+ */
+__init int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
+		unsigned long start_addr, unsigned long long end_addr)
+{
+	unsigned long long last;
+	int i = e820.nr_map;
+	int found = 0;
+
+	last = (end_addr && end_addr < MAX_GAP_END) ? end_addr : MAX_GAP_END;
+
+	while (--i >= 0) {
+		unsigned long long start = e820.map[i].addr;
+		unsigned long long end = start + e820.map[i].size;
+
+		if (end < start_addr)
+			continue;
+
+		/*
+		 * Since "last" is at most 4GB, we know we'll
+		 * fit in 32 bits if this condition is true
+		 */
+		if (last > end) {
+			unsigned long gap = last - end;
+
+			if (gap >= *gapsize) {
+				*gapsize = gap;
+				*gapstart = end;
+				found = 1;
+			}
+		}
+		if (start < last)
+			last = start;
+	}
+	return found;
+}
+
+/*
+ * Search for the biggest gap in the low 32 bits of the e820
+ * memory space.  We pass this space to PCI to assign MMIO resources
+ * for hotplug or unconfigured devices in.
+ * Hopefully the BIOS let enough space left.
+ */
+__init void e820_setup_gap(void)
+{
+	unsigned long gapstart, gapsize, round;
+	int found;
+
+	gapstart = 0x10000000;
+	gapsize = 0x400000;
+	found  = e820_search_gap(&gapstart, &gapsize, 0, MAX_GAP_END);
+
+#ifdef CONFIG_X86_64
+	if (!found) {
+		gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
+		printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
+		       "address range\n"
+		       KERN_ERR "PCI: Unassigned devices with 32bit resource "
+		       "registers may break!\n");
+	}
+#endif
+
+	/*
+	 * See how much we want to round up: start off with
+	 * rounding to the next 1MB area.
+	 */
+	round = 0x100000;
+	while ((gapsize >> 4) > round)
+		round += round;
+	/* Fun with two's complement */
+	pci_mem_start = (gapstart + round) & -round;
+
+	printk(KERN_INFO
+	       "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
+	       pci_mem_start, gapstart, gapsize);
+}
+
+/**
+ * Because of the size limitation of struct boot_params, only first
+ * 128 E820 memory entries are passed to kernel via
+ * boot_params.e820_map, others are passed via SETUP_E820_EXT node of
+ * linked list of struct setup_data, which is parsed here.
+ */
+void __init parse_e820_ext(struct setup_data *sdata, unsigned long pa_data)
+{
+	u32 map_len;
+	int entries;
+	struct e820entry *extmap;
+
+	entries = sdata->len / sizeof(struct e820entry);
+	map_len = sdata->len + sizeof(struct setup_data);
+	if (map_len > PAGE_SIZE)
+		sdata = early_ioremap(pa_data, map_len);
+	extmap = (struct e820entry *)(sdata->data);
+	__append_e820_map(extmap, entries);
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	if (map_len > PAGE_SIZE)
+		early_iounmap(sdata, map_len);
+	printk(KERN_INFO "extended physical RAM map:\n");
+	e820_print_map("extended");
+}
+
+#if defined(CONFIG_X86_64) || \
+	(defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
+/**
+ * Find the ranges of physical addresses that do not correspond to
+ * e820 RAM areas and mark the corresponding pages as nosave for
+ * hibernation (32 bit) or software suspend and suspend to RAM (64 bit).
+ *
+ * This function requires the e820 map to be sorted and without any
+ * overlapping entries and assumes the first e820 area to be RAM.
+ */
+void __init e820_mark_nosave_regions(unsigned long limit_pfn)
+{
+	int i;
+	unsigned long pfn;
+
+	pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size);
+	for (i = 1; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+
+		if (pfn < PFN_UP(ei->addr))
+			register_nosave_region(pfn, PFN_UP(ei->addr));
+
+		pfn = PFN_DOWN(ei->addr + ei->size);
+		if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN)
+			register_nosave_region(PFN_UP(ei->addr), pfn);
+
+		if (pfn >= limit_pfn)
+			break;
+	}
+}
+#endif
+
+/*
+ * Early reserved memory areas.
+ */
+#define MAX_EARLY_RES 20
+
+struct early_res {
+	u64 start, end;
+	char name[16];
+	char overlap_ok;
+};
+static struct early_res early_res[MAX_EARLY_RES] __initdata = {
+	{ 0, PAGE_SIZE, "BIOS data page" },	/* BIOS data page */
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_TRAMPOLINE)
+	{ TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
+#endif
+#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
+	/*
+	 * But first pinch a few for the stack/trampoline stuff
+	 * FIXME: Don't need the extra page at 4K, but need to fix
+	 * trampoline before removing it. (see the GDT stuff)
+	 */
+	{ PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE" },
+	/*
+	 * Has to be in very low memory so we can execute
+	 * real-mode AP code.
+	 */
+	{ TRAMPOLINE_BASE, TRAMPOLINE_BASE + PAGE_SIZE, "TRAMPOLINE" },
+#endif
+	{}
+};
+
+static int __init find_overlapped_early(u64 start, u64 end)
+{
+	int i;
+	struct early_res *r;
+
+	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+		r = &early_res[i];
+		if (end > r->start && start < r->end)
+			break;
+	}
+
+	return i;
+}
+
+/*
+ * Drop the i-th range from the early reservation map,
+ * by copying any higher ranges down one over it, and
+ * clearing what had been the last slot.
+ */
+static void __init drop_range(int i)
+{
+	int j;
+
+	for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++)
+		;
+
+	memmove(&early_res[i], &early_res[i + 1],
+	       (j - 1 - i) * sizeof(struct early_res));
+
+	early_res[j - 1].end = 0;
+}
+
+/*
+ * Split any existing ranges that:
+ *  1) are marked 'overlap_ok', and
+ *  2) overlap with the stated range [start, end)
+ * into whatever portion (if any) of the existing range is entirely
+ * below or entirely above the stated range.  Drop the portion
+ * of the existing range that overlaps with the stated range,
+ * which will allow the caller of this routine to then add that
+ * stated range without conflicting with any existing range.
+ */
+static void __init drop_overlaps_that_are_ok(u64 start, u64 end)
+{
+	int i;
+	struct early_res *r;
+	u64 lower_start, lower_end;
+	u64 upper_start, upper_end;
+	char name[16];
+
+	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+		r = &early_res[i];
+
+		/* Continue past non-overlapping ranges */
+		if (end <= r->start || start >= r->end)
+			continue;
+
+		/*
+		 * Leave non-ok overlaps as is; let caller
+		 * panic "Overlapping early reservations"
+		 * when it hits this overlap.
+		 */
+		if (!r->overlap_ok)
+			return;
+
+		/*
+		 * We have an ok overlap.  We will drop it from the early
+		 * reservation map, and add back in any non-overlapping
+		 * portions (lower or upper) as separate, overlap_ok,
+		 * non-overlapping ranges.
+		 */
+
+		/* 1. Note any non-overlapping (lower or upper) ranges. */
+		strncpy(name, r->name, sizeof(name) - 1);
+
+		lower_start = lower_end = 0;
+		upper_start = upper_end = 0;
+		if (r->start < start) {
+		 	lower_start = r->start;
+			lower_end = start;
+		}
+		if (r->end > end) {
+			upper_start = end;
+			upper_end = r->end;
+		}
+
+		/* 2. Drop the original ok overlapping range */
+		drop_range(i);
+
+		i--;		/* resume for-loop on copied down entry */
+
+		/* 3. Add back in any non-overlapping ranges. */
+		if (lower_end)
+			reserve_early_overlap_ok(lower_start, lower_end, name);
+		if (upper_end)
+			reserve_early_overlap_ok(upper_start, upper_end, name);
+	}
+}
+
+static void __init __reserve_early(u64 start, u64 end, char *name,
+						int overlap_ok)
+{
+	int i;
+	struct early_res *r;
+
+	i = find_overlapped_early(start, end);
+	if (i >= MAX_EARLY_RES)
+		panic("Too many early reservations");
+	r = &early_res[i];
+	if (r->end)
+		panic("Overlapping early reservations "
+		      "%llx-%llx %s to %llx-%llx %s\n",
+		      start, end - 1, name?name:"", r->start,
+		      r->end - 1, r->name);
+	r->start = start;
+	r->end = end;
+	r->overlap_ok = overlap_ok;
+	if (name)
+		strncpy(r->name, name, sizeof(r->name) - 1);
+}
+
+/*
+ * A few early reservtations come here.
+ *
+ * The 'overlap_ok' in the name of this routine does -not- mean it
+ * is ok for these reservations to overlap an earlier reservation.
+ * Rather it means that it is ok for subsequent reservations to
+ * overlap this one.
+ *
+ * Use this entry point to reserve early ranges when you are doing
+ * so out of "Paranoia", reserving perhaps more memory than you need,
+ * just in case, and don't mind a subsequent overlapping reservation
+ * that is known to be needed.
+ *
+ * The drop_overlaps_that_are_ok() call here isn't really needed.
+ * It would be needed if we had two colliding 'overlap_ok'
+ * reservations, so that the second such would not panic on the
+ * overlap with the first.  We don't have any such as of this
+ * writing, but might as well tolerate such if it happens in
+ * the future.
+ */
+void __init reserve_early_overlap_ok(u64 start, u64 end, char *name)
+{
+	drop_overlaps_that_are_ok(start, end);
+	__reserve_early(start, end, name, 1);
+}
+
+/*
+ * Most early reservations come here.
+ *
+ * We first have drop_overlaps_that_are_ok() drop any pre-existing
+ * 'overlap_ok' ranges, so that we can then reserve this memory
+ * range without risk of panic'ing on an overlapping overlap_ok
+ * early reservation.
+ */
+void __init reserve_early(u64 start, u64 end, char *name)
+{
+	drop_overlaps_that_are_ok(start, end);
+	__reserve_early(start, end, name, 0);
+}
+
+void __init free_early(u64 start, u64 end)
+{
+	struct early_res *r;
+	int i;
+
+	i = find_overlapped_early(start, end);
+	r = &early_res[i];
+	if (i >= MAX_EARLY_RES || r->end != end || r->start != start)
+		panic("free_early on not reserved area: %llx-%llx!",
+			 start, end - 1);
+
+	drop_range(i);
+}
+
+void __init early_res_to_bootmem(u64 start, u64 end)
+{
+	int i, count;
+	u64 final_start, final_end;
+
+	count  = 0;
+	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++)
+		count++;
+
+	printk(KERN_INFO "(%d early reservations) ==> bootmem [%010llx - %010llx]\n",
+			 count, start, end);
+	for (i = 0; i < count; i++) {
+		struct early_res *r = &early_res[i];
+		printk(KERN_INFO "  #%d [%010llx - %010llx] %16s", i,
+			r->start, r->end, r->name);
+		final_start = max(start, r->start);
+		final_end = min(end, r->end);
+		if (final_start >= final_end) {
+			printk(KERN_CONT "\n");
+			continue;
+		}
+		printk(KERN_CONT " ==> [%010llx - %010llx]\n",
+			final_start, final_end);
+		reserve_bootmem_generic(final_start, final_end - final_start,
+				BOOTMEM_DEFAULT);
+	}
+}
+
+/* Check for already reserved areas */
+static inline int __init bad_addr(u64 *addrp, u64 size, u64 align)
+{
+	int i;
+	u64 addr = *addrp;
+	int changed = 0;
+	struct early_res *r;
+again:
+	i = find_overlapped_early(addr, addr + size);
+	r = &early_res[i];
+	if (i < MAX_EARLY_RES && r->end) {
+		*addrp = addr = round_up(r->end, align);
+		changed = 1;
+		goto again;
+	}
+	return changed;
+}
+
+/* Check for already reserved areas */
+static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align)
+{
+	int i;
+	u64 addr = *addrp, last;
+	u64 size = *sizep;
+	int changed = 0;
+again:
+	last = addr + size;
+	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+		struct early_res *r = &early_res[i];
+		if (last > r->start && addr < r->start) {
+			size = r->start - addr;
+			changed = 1;
+			goto again;
+		}
+		if (last > r->end && addr < r->end) {
+			addr = round_up(r->end, align);
+			size = last - addr;
+			changed = 1;
+			goto again;
+		}
+		if (last <= r->end && addr >= r->start) {
+			(*sizep)++;
+			return 0;
+		}
+	}
+	if (changed) {
+		*addrp = addr;
+		*sizep = size;
+	}
+	return changed;
+}
+
+/*
+ * Find a free area with specified alignment in a specific range.
+ */
+u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		u64 addr, last;
+		u64 ei_last;
+
+		if (ei->type != E820_RAM)
+			continue;
+		addr = round_up(ei->addr, align);
+		ei_last = ei->addr + ei->size;
+		if (addr < start)
+			addr = round_up(start, align);
+		if (addr >= ei_last)
+			continue;
+		while (bad_addr(&addr, size, align) && addr+size <= ei_last)
+			;
+		last = addr + size;
+		if (last > ei_last)
+			continue;
+		if (last > end)
+			continue;
+		return addr;
+	}
+	return -1ULL;
+}
+
+/*
+ * Find next free range after *start
+ */
+u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		u64 addr, last;
+		u64 ei_last;
+
+		if (ei->type != E820_RAM)
+			continue;
+		addr = round_up(ei->addr, align);
+		ei_last = ei->addr + ei->size;
+		if (addr < start)
+			addr = round_up(start, align);
+		if (addr >= ei_last)
+			continue;
+		*sizep = ei_last - addr;
+		while (bad_addr_size(&addr, sizep, align) &&
+			addr + *sizep <= ei_last)
+			;
+		last = addr + *sizep;
+		if (last > ei_last)
+			continue;
+		return addr;
+	}
+	return -1UL;
+
+}
+
+/*
+ * pre allocated 4k and reserved it in e820
+ */
+u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
+{
+	u64 size = 0;
+	u64 addr;
+	u64 start;
+
+	start = startt;
+	while (size < sizet)
+		start = find_e820_area_size(start, &size, align);
+
+	if (size < sizet)
+		return 0;
+
+	addr = round_down(start + size - sizet, align);
+	e820_update_range(addr, sizet, E820_RAM, E820_RESERVED);
+	e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED);
+	printk(KERN_INFO "update e820 for early_reserve_e820\n");
+	update_e820();
+	update_e820_saved();
+
+	return addr;
+}
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_PAE
+#  define MAX_ARCH_PFN		(1ULL<<(36-PAGE_SHIFT))
+# else
+#  define MAX_ARCH_PFN		(1ULL<<(32-PAGE_SHIFT))
+# endif
+#else /* CONFIG_X86_32 */
+# define MAX_ARCH_PFN MAXMEM>>PAGE_SHIFT
+#endif
+
+/*
+ * Find the highest page frame number we have available
+ */
+static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
+{
+	int i;
+	unsigned long last_pfn = 0;
+	unsigned long max_arch_pfn = MAX_ARCH_PFN;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		unsigned long start_pfn;
+		unsigned long end_pfn;
+
+		if (ei->type != type)
+			continue;
+
+		start_pfn = ei->addr >> PAGE_SHIFT;
+		end_pfn = (ei->addr + ei->size) >> PAGE_SHIFT;
+
+		if (start_pfn >= limit_pfn)
+			continue;
+		if (end_pfn > limit_pfn) {
+			last_pfn = limit_pfn;
+			break;
+		}
+		if (end_pfn > last_pfn)
+			last_pfn = end_pfn;
+	}
+
+	if (last_pfn > max_arch_pfn)
+		last_pfn = max_arch_pfn;
+
+	printk(KERN_INFO "last_pfn = %#lx max_arch_pfn = %#lx\n",
+			 last_pfn, max_arch_pfn);
+	return last_pfn;
+}
+unsigned long __init e820_end_of_ram_pfn(void)
+{
+	return e820_end_pfn(MAX_ARCH_PFN, E820_RAM);
+}
+
+unsigned long __init e820_end_of_low_ram_pfn(void)
+{
+	return e820_end_pfn(1UL<<(32 - PAGE_SHIFT), E820_RAM);
+}
+/*
+ * Finds an active region in the address range from start_pfn to last_pfn and
+ * returns its range in ei_startpfn and ei_endpfn for the e820 entry.
+ */
+int __init e820_find_active_region(const struct e820entry *ei,
+				  unsigned long start_pfn,
+				  unsigned long last_pfn,
+				  unsigned long *ei_startpfn,
+				  unsigned long *ei_endpfn)
+{
+	u64 align = PAGE_SIZE;
+
+	*ei_startpfn = round_up(ei->addr, align) >> PAGE_SHIFT;
+	*ei_endpfn = round_down(ei->addr + ei->size, align) >> PAGE_SHIFT;
+
+	/* Skip map entries smaller than a page */
+	if (*ei_startpfn >= *ei_endpfn)
+		return 0;
+
+	/* Skip if map is outside the node */
+	if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
+				    *ei_startpfn >= last_pfn)
+		return 0;
+
+	/* Check for overlaps */
+	if (*ei_startpfn < start_pfn)
+		*ei_startpfn = start_pfn;
+	if (*ei_endpfn > last_pfn)
+		*ei_endpfn = last_pfn;
+
+	return 1;
+}
+
+/* Walk the e820 map and register active regions within a node */
+void __init e820_register_active_regions(int nid, unsigned long start_pfn,
+					 unsigned long last_pfn)
+{
+	unsigned long ei_startpfn;
+	unsigned long ei_endpfn;
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++)
+		if (e820_find_active_region(&e820.map[i],
+					    start_pfn, last_pfn,
+					    &ei_startpfn, &ei_endpfn))
+			add_active_range(nid, ei_startpfn, ei_endpfn);
+}
+
+/*
+ * Find the hole size (in bytes) in the memory range.
+ * @start: starting address of the memory range to scan
+ * @end: ending address of the memory range to scan
+ */
+u64 __init e820_hole_size(u64 start, u64 end)
+{
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long last_pfn = end >> PAGE_SHIFT;
+	unsigned long ei_startpfn, ei_endpfn, ram = 0;
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		if (e820_find_active_region(&e820.map[i],
+					    start_pfn, last_pfn,
+					    &ei_startpfn, &ei_endpfn))
+			ram += ei_endpfn - ei_startpfn;
+	}
+	return end - start - ((u64)ram << PAGE_SHIFT);
+}
+
+static void early_panic(char *msg)
+{
+	early_printk(msg);
+	panic(msg);
+}
+
+static int userdef __initdata;
+
+/* "mem=nopentium" disables the 4MB page tables. */
+static int __init parse_memopt(char *p)
+{
+	u64 mem_size;
+
+	if (!p)
+		return -EINVAL;
+
+#ifdef CONFIG_X86_32
+	if (!strcmp(p, "nopentium")) {
+		setup_clear_cpu_cap(X86_FEATURE_PSE);
+		return 0;
+	}
+#endif
+
+	userdef = 1;
+	mem_size = memparse(p, &p);
+	e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
+
+	return 0;
+}
+early_param("mem", parse_memopt);
+
+static int __init parse_memmap_opt(char *p)
+{
+	char *oldp;
+	u64 start_at, mem_size;
+
+	if (!p)
+		return -EINVAL;
+
+	if (!strcmp(p, "exactmap")) {
+#ifdef CONFIG_CRASH_DUMP
+		/*
+		 * If we are doing a crash dump, we still need to know
+		 * the real mem size before original memory map is
+		 * reset.
+		 */
+		saved_max_pfn = e820_end_of_ram_pfn();
+#endif
+		e820.nr_map = 0;
+		userdef = 1;
+		return 0;
+	}
+
+	oldp = p;
+	mem_size = memparse(p, &p);
+	if (p == oldp)
+		return -EINVAL;
+
+	userdef = 1;
+	if (*p == '@') {
+		start_at = memparse(p+1, &p);
+		e820_add_region(start_at, mem_size, E820_RAM);
+	} else if (*p == '#') {
+		start_at = memparse(p+1, &p);
+		e820_add_region(start_at, mem_size, E820_ACPI);
+	} else if (*p == '$') {
+		start_at = memparse(p+1, &p);
+		e820_add_region(start_at, mem_size, E820_RESERVED);
+	} else
+		e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
+
+	return *p == '\0' ? 0 : -EINVAL;
+}
+early_param("memmap", parse_memmap_opt);
+
+void __init finish_e820_parsing(void)
+{
+	if (userdef) {
+		int nr = e820.nr_map;
+
+		if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0)
+			early_panic("Invalid user supplied memory map");
+		e820.nr_map = nr;
+
+		printk(KERN_INFO "user-defined physical RAM map:\n");
+		e820_print_map("user");
+	}
+}
+
+static inline const char *e820_type_to_string(int e820_type)
+{
+	switch (e820_type) {
+	case E820_RESERVED_KERN:
+	case E820_RAM:	return "System RAM";
+	case E820_ACPI:	return "ACPI Tables";
+	case E820_NVS:	return "ACPI Non-volatile Storage";
+	default:	return "reserved";
+	}
+}
+
+/*
+ * Mark e820 reserved areas as busy for the resource manager.
+ */
+void __init e820_reserve_resources(void)
+{
+	int i;
+	struct resource *res;
+	u64 end;
+
+	res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
+	for (i = 0; i < e820.nr_map; i++) {
+		end = e820.map[i].addr + e820.map[i].size - 1;
+#ifndef CONFIG_RESOURCES_64BIT
+		if (end > 0x100000000ULL) {
+			res++;
+			continue;
+		}
+#endif
+		res->name = e820_type_to_string(e820.map[i].type);
+		res->start = e820.map[i].addr;
+		res->end = end;
+
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		insert_resource(&iomem_resource, res);
+		res++;
+	}
+
+	for (i = 0; i < e820_saved.nr_map; i++) {
+		struct e820entry *entry = &e820_saved.map[i];
+		firmware_map_add_early(entry->addr,
+			entry->addr + entry->size - 1,
+			e820_type_to_string(entry->type));
+	}
+}
+
+char *__init default_machine_specific_memory_setup(void)
+{
+	char *who = "BIOS-e820";
+	int new_nr;
+	/*
+	 * Try to copy the BIOS-supplied E820-map.
+	 *
+	 * Otherwise fake a memory map; one section from 0k->640k,
+	 * the next section from 1mb->appropriate_mem_k
+	 */
+	new_nr = boot_params.e820_entries;
+	sanitize_e820_map(boot_params.e820_map,
+			ARRAY_SIZE(boot_params.e820_map),
+			&new_nr);
+	boot_params.e820_entries = new_nr;
+	if (append_e820_map(boot_params.e820_map, boot_params.e820_entries)
+	  < 0) {
+		u64 mem_size;
+
+		/* compare results from other methods and take the greater */
+		if (boot_params.alt_mem_k
+		    < boot_params.screen_info.ext_mem_k) {
+			mem_size = boot_params.screen_info.ext_mem_k;
+			who = "BIOS-88";
+		} else {
+			mem_size = boot_params.alt_mem_k;
+			who = "BIOS-e801";
+		}
+
+		e820.nr_map = 0;
+		e820_add_region(0, LOWMEMSIZE(), E820_RAM);
+		e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+	}
+
+	/* In case someone cares... */
+	return who;
+}
+
+char *__init __attribute__((weak)) machine_specific_memory_setup(void)
+{
+	if (x86_quirks->arch_memory_setup) {
+		char *who = x86_quirks->arch_memory_setup();
+
+		if (who)
+			return who;
+	}
+	return default_machine_specific_memory_setup();
+}
+
+/* Overridden in paravirt.c if CONFIG_PARAVIRT */
+char * __init __attribute__((weak)) memory_setup(void)
+{
+	return machine_specific_memory_setup();
+}
+
+void __init setup_memory_map(void)
+{
+	char *who;
+
+	who = memory_setup();
+	memcpy(&e820_saved, &e820, sizeof(struct e820map));
+	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+	e820_print_map(who);
+}
diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c
deleted file mode 100644
index ed733e7cf4e6..000000000000
--- a/arch/x86/kernel/e820_32.c
+++ /dev/null
@@ -1,775 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/pfn.h>
-#include <linux/uaccess.h>
-#include <linux/suspend.h>
-
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-
-struct e820map e820;
-struct change_member {
-	struct e820entry *pbios; /* pointer to original bios entry */
-	unsigned long long addr; /* address for this change point */
-};
-static struct change_member change_point_list[2*E820MAX] __initdata;
-static struct change_member *change_point[2*E820MAX] __initdata;
-static struct e820entry *overlap_list[E820MAX] __initdata;
-static struct e820entry new_bios[E820MAX] __initdata;
-/* For PCI or other memory-mapped resources */
-unsigned long pci_mem_start = 0x10000000;
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_mem_start);
-#endif
-extern int user_defined_memmap;
-
-static struct resource system_rom_resource = {
-	.name	= "System ROM",
-	.start	= 0xf0000,
-	.end	= 0xfffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource extension_rom_resource = {
-	.name	= "Extension ROM",
-	.start	= 0xe0000,
-	.end	= 0xeffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource adapter_rom_resources[] = { {
-	.name 	= "Adapter ROM",
-	.start	= 0xc8000,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-} };
-
-static struct resource video_rom_resource = {
-	.name 	= "Video ROM",
-	.start	= 0xc0000,
-	.end	= 0xc7fff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-#define ROMSIGNATURE 0xaa55
-
-static int __init romsignature(const unsigned char *rom)
-{
-	const unsigned short * const ptr = (const unsigned short *)rom;
-	unsigned short sig;
-
-	return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE;
-}
-
-static int __init romchecksum(const unsigned char *rom, unsigned long length)
-{
-	unsigned char sum, c;
-
-	for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--)
-		sum += c;
-	return !length && !sum;
-}
-
-static void __init probe_roms(void)
-{
-	const unsigned char *rom;
-	unsigned long start, length, upper;
-	unsigned char c;
-	int i;
-
-	/* video rom */
-	upper = adapter_rom_resources[0].start;
-	for (start = video_rom_resource.start; start < upper; start += 2048) {
-		rom = isa_bus_to_virt(start);
-		if (!romsignature(rom))
-			continue;
-
-		video_rom_resource.start = start;
-
-		if (probe_kernel_address(rom + 2, c) != 0)
-			continue;
-
-		/* 0 < length <= 0x7f * 512, historically */
-		length = c * 512;
-
-		/* if checksum okay, trust length byte */
-		if (length && romchecksum(rom, length))
-			video_rom_resource.end = start + length - 1;
-
-		request_resource(&iomem_resource, &video_rom_resource);
-		break;
-	}
-
-	start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
-	if (start < upper)
-		start = upper;
-
-	/* system rom */
-	request_resource(&iomem_resource, &system_rom_resource);
-	upper = system_rom_resource.start;
-
-	/* check for extension rom (ignore length byte!) */
-	rom = isa_bus_to_virt(extension_rom_resource.start);
-	if (romsignature(rom)) {
-		length = extension_rom_resource.end - extension_rom_resource.start + 1;
-		if (romchecksum(rom, length)) {
-			request_resource(&iomem_resource, &extension_rom_resource);
-			upper = extension_rom_resource.start;
-		}
-	}
-
-	/* check for adapter roms on 2k boundaries */
-	for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) {
-		rom = isa_bus_to_virt(start);
-		if (!romsignature(rom))
-			continue;
-
-		if (probe_kernel_address(rom + 2, c) != 0)
-			continue;
-
-		/* 0 < length <= 0x7f * 512, historically */
-		length = c * 512;
-
-		/* but accept any length that fits if checksum okay */
-		if (!length || start + length > upper || !romchecksum(rom, length))
-			continue;
-
-		adapter_rom_resources[i].start = start;
-		adapter_rom_resources[i].end = start + length - 1;
-		request_resource(&iomem_resource, &adapter_rom_resources[i]);
-
-		start = adapter_rom_resources[i++].end & ~2047UL;
-	}
-}
-
-/*
- * Request address space for all standard RAM and ROM resources
- * and also for regions reported as reserved by the e820.
- */
-void __init init_iomem_resources(struct resource *code_resource,
-		struct resource *data_resource,
-		struct resource *bss_resource)
-{
-	int i;
-
-	probe_roms();
-	for (i = 0; i < e820.nr_map; i++) {
-		struct resource *res;
-#ifndef CONFIG_RESOURCES_64BIT
-		if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
-			continue;
-#endif
-		res = kzalloc(sizeof(struct resource), GFP_ATOMIC);
-		switch (e820.map[i].type) {
-		case E820_RAM:	res->name = "System RAM"; break;
-		case E820_ACPI:	res->name = "ACPI Tables"; break;
-		case E820_NVS:	res->name = "ACPI Non-volatile Storage"; break;
-		default:	res->name = "reserved";
-		}
-		res->start = e820.map[i].addr;
-		res->end = res->start + e820.map[i].size - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		if (request_resource(&iomem_resource, res)) {
-			kfree(res);
-			continue;
-		}
-		if (e820.map[i].type == E820_RAM) {
-			/*
-			 *  We don't know which RAM region contains kernel data,
-			 *  so we try it repeatedly and let the resource manager
-			 *  test it.
-			 */
-			request_resource(res, code_resource);
-			request_resource(res, data_resource);
-			request_resource(res, bss_resource);
-#ifdef CONFIG_KEXEC
-			if (crashk_res.start != crashk_res.end)
-				request_resource(res, &crashk_res);
-#endif
-		}
-	}
-}
-
-#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION)
-/**
- * e820_mark_nosave_regions - Find the ranges of physical addresses that do not
- * correspond to e820 RAM areas and mark the corresponding pages as nosave for
- * hibernation.
- *
- * This function requires the e820 map to be sorted and without any
- * overlapping entries and assumes the first e820 area to be RAM.
- */
-void __init e820_mark_nosave_regions(void)
-{
-	int i;
-	unsigned long pfn;
-
-	pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size);
-	for (i = 1; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-
-		if (pfn < PFN_UP(ei->addr))
-			register_nosave_region(pfn, PFN_UP(ei->addr));
-
-		pfn = PFN_DOWN(ei->addr + ei->size);
-		if (ei->type != E820_RAM)
-			register_nosave_region(PFN_UP(ei->addr), pfn);
-
-		if (pfn >= max_low_pfn)
-			break;
-	}
-}
-#endif
-
-void __init add_memory_region(unsigned long long start,
-			      unsigned long long size, int type)
-{
-	int x;
-
-	x = e820.nr_map;
-
-	if (x == E820MAX) {
-		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
-		return;
-	}
-
-	e820.map[x].addr = start;
-	e820.map[x].size = size;
-	e820.map[x].type = type;
-	e820.nr_map++;
-} /* add_memory_region */
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries.  The following
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
-{
-	struct change_member *change_tmp;
-	unsigned long current_type, last_type;
-	unsigned long long last_addr;
-	int chgidx, still_changing;
-	int overlap_entries;
-	int new_bios_entry;
-	int old_nr, new_nr, chg_nr;
-	int i;
-
-	/*
-		Visually we're performing the following (1,2,3,4 = memory types)...
-
-		Sample memory map (w/overlaps):
-		   ____22__________________
-		   ______________________4_
-		   ____1111________________
-		   _44_____________________
-		   11111111________________
-		   ____________________33__
-		   ___________44___________
-		   __________33333_________
-		   ______________22________
-		   ___________________2222_
-		   _________111111111______
-		   _____________________11_
-		   _________________4______
-
-		Sanitized equivalent (no overlap):
-		   1_______________________
-		   _44_____________________
-		   ___1____________________
-		   ____22__________________
-		   ______11________________
-		   _________1______________
-		   __________3_____________
-		   ___________44___________
-		   _____________33_________
-		   _______________2________
-		   ________________1_______
-		   _________________4______
-		   ___________________2____
-		   ____________________33__
-		   ______________________4_
-	*/
-	/* if there's only one memory region, don't bother */
-	if (*pnr_map < 2) {
-		return -1;
-	}
-
-	old_nr = *pnr_map;
-
-	/* bail out if we find any unreasonable addresses in bios map */
-	for (i=0; i<old_nr; i++)
-		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) {
-			return -1;
-		}
-
-	/* create pointers for initial change-point information (for sorting) */
-	for (i=0; i < 2*old_nr; i++)
-		change_point[i] = &change_point_list[i];
-
-	/* record all known change-points (starting and ending addresses),
-	   omitting those that are for empty memory regions */
-	chgidx = 0;
-	for (i=0; i < old_nr; i++)	{
-		if (biosmap[i].size != 0) {
-			change_point[chgidx]->addr = biosmap[i].addr;
-			change_point[chgidx++]->pbios = &biosmap[i];
-			change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
-			change_point[chgidx++]->pbios = &biosmap[i];
-		}
-	}
-	chg_nr = chgidx;    	/* true number of change-points */
-
-	/* sort change-point list by memory addresses (low -> high) */
-	still_changing = 1;
-	while (still_changing)	{
-		still_changing = 0;
-		for (i=1; i < chg_nr; i++)  {
-			/* if <current_addr> > <last_addr>, swap */
-			/* or, if current=<start_addr> & last=<end_addr>, swap */
-			if ((change_point[i]->addr < change_point[i-1]->addr) ||
-				((change_point[i]->addr == change_point[i-1]->addr) &&
-				 (change_point[i]->addr == change_point[i]->pbios->addr) &&
-				 (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
-			   )
-			{
-				change_tmp = change_point[i];
-				change_point[i] = change_point[i-1];
-				change_point[i-1] = change_tmp;
-				still_changing=1;
-			}
-		}
-	}
-
-	/* create a new bios memory map, removing overlaps */
-	overlap_entries=0;	 /* number of entries in the overlap table */
-	new_bios_entry=0;	 /* index for creating new bios map entries */
-	last_type = 0;		 /* start with undefined memory type */
-	last_addr = 0;		 /* start with 0 as last starting address */
-	/* loop through change-points, determining affect on the new bios map */
-	for (chgidx=0; chgidx < chg_nr; chgidx++)
-	{
-		/* keep track of all overlapping bios entries */
-		if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
-		{
-			/* add map entry to overlap list (> 1 entry implies an overlap) */
-			overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
-		}
-		else
-		{
-			/* remove entry from list (order independent, so swap with last) */
-			for (i=0; i<overlap_entries; i++)
-			{
-				if (overlap_list[i] == change_point[chgidx]->pbios)
-					overlap_list[i] = overlap_list[overlap_entries-1];
-			}
-			overlap_entries--;
-		}
-		/* if there are overlapping entries, decide which "type" to use */
-		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
-		current_type = 0;
-		for (i=0; i<overlap_entries; i++)
-			if (overlap_list[i]->type > current_type)
-				current_type = overlap_list[i]->type;
-		/* continue building up new bios map based on this information */
-		if (current_type != last_type)	{
-			if (last_type != 0)	 {
-				new_bios[new_bios_entry].size =
-					change_point[chgidx]->addr - last_addr;
-				/* move forward only if the new size was non-zero */
-				if (new_bios[new_bios_entry].size != 0)
-					if (++new_bios_entry >= E820MAX)
-						break; 	/* no more space left for new bios entries */
-			}
-			if (current_type != 0)	{
-				new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
-				new_bios[new_bios_entry].type = current_type;
-				last_addr=change_point[chgidx]->addr;
-			}
-			last_type = current_type;
-		}
-	}
-	new_nr = new_bios_entry;   /* retain count for new bios entries */
-
-	/* copy new bios mapping into original location */
-	memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
-	*pnr_map = new_nr;
-
-	return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory.  If we aren't, we'll fake a memory map.
- *
- * We check to see that the memory map contains at least 2 elements
- * before we'll use it, because the detection code in setup.S may
- * not be perfect and most every PC known to man has two memory
- * regions: one from 0 to 640k, and one from 1mb up.  (The IBM
- * thinkpad 560x, for example, does not cooperate with the memory
- * detection code.)
- */
-int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
-{
-	/* Only one memory region (or negative)? Ignore it */
-	if (nr_map < 2)
-		return -1;
-
-	do {
-		u64 start = biosmap->addr;
-		u64 size = biosmap->size;
-		u64 end = start + size;
-		u32 type = biosmap->type;
-
-		/* Overflow in 64 bits? Ignore the memory map. */
-		if (start > end)
-			return -1;
-
-		add_memory_region(start, size, type);
-	} while (biosmap++, --nr_map);
-
-	return 0;
-}
-
-/*
- * Find the highest page frame number we have available
- */
-void __init propagate_e820_map(void)
-{
-	int i;
-
-	max_pfn = 0;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		unsigned long start, end;
-		/* RAM? */
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		start = PFN_UP(e820.map[i].addr);
-		end = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
-		if (start >= end)
-			continue;
-		if (end > max_pfn)
-			max_pfn = end;
-		memory_present(0, start, end);
-	}
-}
-
-/*
- * Register fully available low RAM pages with the bootmem allocator.
- */
-void __init register_bootmem_low_pages(unsigned long max_low_pfn)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		unsigned long curr_pfn, last_pfn, size;
-		/*
-		 * Reserve usable low memory
-		 */
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		/*
-		 * We are rounding up the start address of usable memory:
-		 */
-		curr_pfn = PFN_UP(e820.map[i].addr);
-		if (curr_pfn >= max_low_pfn)
-			continue;
-		/*
-		 * ... and at the end of the usable range downwards:
-		 */
-		last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
-
-		if (last_pfn > max_low_pfn)
-			last_pfn = max_low_pfn;
-
-		/*
-		 * .. finally, did all the rounding and playing
-		 * around just make the area go away?
-		 */
-		if (last_pfn <= curr_pfn)
-			continue;
-
-		size = last_pfn - curr_pfn;
-		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
-	}
-}
-
-void __init e820_register_memory(void)
-{
-	unsigned long gapstart, gapsize, round;
-	unsigned long long last;
-	int i;
-
-	/*
-	 * Search for the biggest gap in the low 32 bits of the e820
-	 * memory space.
-	 */
-	last = 0x100000000ull;
-	gapstart = 0x10000000;
-	gapsize = 0x400000;
-	i = e820.nr_map;
-	while (--i >= 0) {
-		unsigned long long start = e820.map[i].addr;
-		unsigned long long end = start + e820.map[i].size;
-
-		/*
-		 * Since "last" is at most 4GB, we know we'll
-		 * fit in 32 bits if this condition is true
-		 */
-		if (last > end) {
-			unsigned long gap = last - end;
-
-			if (gap > gapsize) {
-				gapsize = gap;
-				gapstart = end;
-			}
-		}
-		if (start < last)
-			last = start;
-	}
-
-	/*
-	 * See how much we want to round up: start off with
-	 * rounding to the next 1MB area.
-	 */
-	round = 0x100000;
-	while ((gapsize >> 4) > round)
-		round += round;
-	/* Fun with two's complement */
-	pci_mem_start = (gapstart + round) & -round;
-
-	printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n",
-		pci_mem_start, gapstart, gapsize);
-}
-
-void __init print_memory_map(char *who)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		printk(" %s: %016Lx - %016Lx ", who,
-			e820.map[i].addr,
-			e820.map[i].addr + e820.map[i].size);
-		switch (e820.map[i].type) {
-		case E820_RAM:	printk("(usable)\n");
-				break;
-		case E820_RESERVED:
-				printk("(reserved)\n");
-				break;
-		case E820_ACPI:
-				printk("(ACPI data)\n");
-				break;
-		case E820_NVS:
-				printk("(ACPI NVS)\n");
-				break;
-		default:	printk("type %u\n", e820.map[i].type);
-				break;
-		}
-	}
-}
-
-void __init limit_regions(unsigned long long size)
-{
-	unsigned long long current_addr;
-	int i;
-
-	print_memory_map("limit_regions start");
-	for (i = 0; i < e820.nr_map; i++) {
-		current_addr = e820.map[i].addr + e820.map[i].size;
-		if (current_addr < size)
-			continue;
-
-		if (e820.map[i].type != E820_RAM)
-			continue;
-
-		if (e820.map[i].addr >= size) {
-			/*
-			 * This region starts past the end of the
-			 * requested size, skip it completely.
-			 */
-			e820.nr_map = i;
-		} else {
-			e820.nr_map = i + 1;
-			e820.map[i].size -= current_addr - size;
-		}
-		print_memory_map("limit_regions endfor");
-		return;
-	}
-	print_memory_map("limit_regions endfunc");
-}
-
-/*
- * This function checks if any part of the range <start,end> is mapped
- * with type.
- */
-int
-e820_any_mapped(u64 start, u64 end, unsigned type)
-{
-	int i;
-	for (i = 0; i < e820.nr_map; i++) {
-		const struct e820entry *ei = &e820.map[i];
-		if (type && ei->type != type)
-			continue;
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-		return 1;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(e820_any_mapped);
-
- /*
-  * This function checks if the entire range <start,end> is mapped with type.
-  *
-  * Note: this function only works correct if the e820 table is sorted and
-  * not-overlapping, which is the case
-  */
-int __init
-e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
-{
-	u64 start = s;
-	u64 end = e;
-	int i;
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		if (type && ei->type != type)
-			continue;
-		/* is the region (part) in overlap with the current region ?*/
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-		/* if the region is at the beginning of <start,end> we move
-		 * start to the end of the region since it's ok until there
-		 */
-		if (ei->addr <= start)
-			start = ei->addr + ei->size;
-		/* if start is now at or beyond end, we're done, full
-		 * coverage */
-		if (start >= end)
-			return 1; /* we're done */
-	}
-	return 0;
-}
-
-static int __init parse_memmap(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp(arg, "exactmap") == 0) {
-#ifdef CONFIG_CRASH_DUMP
-		/* If we are doing a crash dump, we
-		 * still need to know the real mem
-		 * size before original memory map is
-		 * reset.
-		 */
-		propagate_e820_map();
-		saved_max_pfn = max_pfn;
-#endif
-		e820.nr_map = 0;
-		user_defined_memmap = 1;
-	} else {
-		/* If the user specifies memory size, we
-		 * limit the BIOS-provided memory map to
-		 * that size. exactmap can be used to specify
-		 * the exact map. mem=number can be used to
-		 * trim the existing memory map.
-		 */
-		unsigned long long start_at, mem_size;
-
-		mem_size = memparse(arg, &arg);
-		if (*arg == '@') {
-			start_at = memparse(arg+1, &arg);
-			add_memory_region(start_at, mem_size, E820_RAM);
-		} else if (*arg == '#') {
-			start_at = memparse(arg+1, &arg);
-			add_memory_region(start_at, mem_size, E820_ACPI);
-		} else if (*arg == '$') {
-			start_at = memparse(arg+1, &arg);
-			add_memory_region(start_at, mem_size, E820_RESERVED);
-		} else {
-			limit_regions(mem_size);
-			user_defined_memmap = 1;
-		}
-	}
-	return 0;
-}
-early_param("memmap", parse_memmap);
-void __init update_memory_range(u64 start, u64 size, unsigned old_type,
-				unsigned new_type)
-{
-	int i;
-
-	BUG_ON(old_type == new_type);
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		u64 final_start, final_end;
-		if (ei->type != old_type)
-			continue;
-		/* totally covered? */
-		if (ei->addr >= start && ei->size <= size) {
-			ei->type = new_type;
-			continue;
-		}
-		/* partially covered */
-		final_start = max(start, ei->addr);
-		final_end = min(start + size, ei->addr + ei->size);
-		if (final_start >= final_end)
-			continue;
-		add_memory_region(final_start, final_end - final_start,
-					 new_type);
-	}
-}
-void __init update_e820(void)
-{
-	u8 nr_map;
-
-	nr_map = e820.nr_map;
-	if (sanitize_e820_map(e820.map, &nr_map))
-		return;
-	e820.nr_map = nr_map;
-	printk(KERN_INFO "modified physical RAM map:\n");
-	print_memory_map("modified");
-}
diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c
deleted file mode 100644
index 124480c0008d..000000000000
--- a/arch/x86/kernel/e820_64.c
+++ /dev/null
@@ -1,952 +0,0 @@
-/*
- * Handle the memory map.
- * The functions here do the job until bootmem takes over.
- *
- *  Getting sanitize_e820_map() in sync with i386 version by applying change:
- *  -  Provisions for empty E820 memory regions (reported by certain BIOSes).
- *     Alex Achenbach <xela@slit.de>, December 2002.
- *  Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/suspend.h>
-#include <linux/pfn.h>
-
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/e820.h>
-#include <asm/proto.h>
-#include <asm/setup.h>
-#include <asm/sections.h>
-#include <asm/kdebug.h>
-#include <asm/trampoline.h>
-
-struct e820map e820;
-
-/*
- * PFN of last memory page.
- */
-unsigned long end_pfn;
-
-/*
- * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
- * The direct mapping extends to max_pfn_mapped, so that we can directly access
- * apertures, ACPI and other tables without having to play with fixmaps.
- */
-unsigned long max_pfn_mapped;
-
-/*
- * Last pfn which the user wants to use.
- */
-static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT;
-
-/*
- * Early reserved memory areas.
- */
-#define MAX_EARLY_RES 20
-
-struct early_res {
-	unsigned long start, end;
-	char name[16];
-};
-static struct early_res early_res[MAX_EARLY_RES] __initdata = {
-	{ 0, PAGE_SIZE, "BIOS data page" },			/* BIOS data page */
-#ifdef CONFIG_X86_TRAMPOLINE
-	{ TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
-#endif
-	{}
-};
-
-void __init reserve_early(unsigned long start, unsigned long end, char *name)
-{
-	int i;
-	struct early_res *r;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		r = &early_res[i];
-		if (end > r->start && start < r->end)
-			panic("Overlapping early reservations %lx-%lx %s to %lx-%lx %s\n",
-			      start, end - 1, name?name:"", r->start, r->end - 1, r->name);
-	}
-	if (i >= MAX_EARLY_RES)
-		panic("Too many early reservations");
-	r = &early_res[i];
-	r->start = start;
-	r->end = end;
-	if (name)
-		strncpy(r->name, name, sizeof(r->name) - 1);
-}
-
-void __init free_early(unsigned long start, unsigned long end)
-{
-	struct early_res *r;
-	int i, j;
-
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		r = &early_res[i];
-		if (start == r->start && end == r->end)
-			break;
-	}
-	if (i >= MAX_EARLY_RES || !early_res[i].end)
-		panic("free_early on not reserved area: %lx-%lx!", start, end);
-
-	for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++)
-		;
-
-	memmove(&early_res[i], &early_res[i + 1],
-	       (j - 1 - i) * sizeof(struct early_res));
-
-	early_res[j - 1].end = 0;
-}
-
-void __init early_res_to_bootmem(unsigned long start, unsigned long end)
-{
-	int i;
-	unsigned long final_start, final_end;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		struct early_res *r = &early_res[i];
-		final_start = max(start, r->start);
-		final_end = min(end, r->end);
-		if (final_start >= final_end)
-			continue;
-		printk(KERN_INFO "  early res: %d [%lx-%lx] %s\n", i,
-			final_start, final_end - 1, r->name);
-		reserve_bootmem_generic(final_start, final_end - final_start);
-	}
-}
-
-/* Check for already reserved areas */
-static inline int __init
-bad_addr(unsigned long *addrp, unsigned long size, unsigned long align)
-{
-	int i;
-	unsigned long addr = *addrp, last;
-	int changed = 0;
-again:
-	last = addr + size;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		struct early_res *r = &early_res[i];
-		if (last >= r->start && addr < r->end) {
-			*addrp = addr = round_up(r->end, align);
-			changed = 1;
-			goto again;
-		}
-	}
-	return changed;
-}
-
-/* Check for already reserved areas */
-static inline int __init
-bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align)
-{
-	int i;
-	unsigned long addr = *addrp, last;
-	unsigned long size = *sizep;
-	int changed = 0;
-again:
-	last = addr + size;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		struct early_res *r = &early_res[i];
-		if (last > r->start && addr < r->start) {
-			size = r->start - addr;
-			changed = 1;
-			goto again;
-		}
-		if (last > r->end && addr < r->end) {
-			addr = round_up(r->end, align);
-			size = last - addr;
-			changed = 1;
-			goto again;
-		}
-		if (last <= r->end && addr >= r->start) {
-			(*sizep)++;
-			return 0;
-		}
-	}
-	if (changed) {
-		*addrp = addr;
-		*sizep = size;
-	}
-	return changed;
-}
-/*
- * This function checks if any part of the range <start,end> is mapped
- * with type.
- */
-int
-e820_any_mapped(unsigned long start, unsigned long end, unsigned type)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-
-		if (type && ei->type != type)
-			continue;
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-		return 1;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(e820_any_mapped);
-
-/*
- * This function checks if the entire range <start,end> is mapped with type.
- *
- * Note: this function only works correct if the e820 table is sorted and
- * not-overlapping, which is the case
- */
-int __init e820_all_mapped(unsigned long start, unsigned long end,
-			   unsigned type)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-
-		if (type && ei->type != type)
-			continue;
-		/* is the region (part) in overlap with the current region ?*/
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-
-		/* if the region is at the beginning of <start,end> we move
-		 * start to the end of the region since it's ok until there
-		 */
-		if (ei->addr <= start)
-			start = ei->addr + ei->size;
-		/*
-		 * if start is now at or beyond end, we're done, full
-		 * coverage
-		 */
-		if (start >= end)
-			return 1;
-	}
-	return 0;
-}
-
-/*
- * Find a free area with specified alignment in a specific range.
- */
-unsigned long __init find_e820_area(unsigned long start, unsigned long end,
-				    unsigned long size, unsigned long align)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		unsigned long addr, last;
-		unsigned long ei_last;
-
-		if (ei->type != E820_RAM)
-			continue;
-		addr = round_up(ei->addr, align);
-		ei_last = ei->addr + ei->size;
-		if (addr < start)
-			addr = round_up(start, align);
-		if (addr >= ei_last)
-			continue;
-		while (bad_addr(&addr, size, align) && addr+size <= ei_last)
-			;
-		last = addr + size;
-		if (last > ei_last)
-			continue;
-		if (last > end)
-			continue;
-		return addr;
-	}
-	return -1UL;
-}
-
-/*
- * Find next free range after *start
- */
-unsigned long __init find_e820_area_size(unsigned long start,
-					 unsigned long *sizep,
-					 unsigned long align)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		unsigned long addr, last;
-		unsigned long ei_last;
-
-		if (ei->type != E820_RAM)
-			continue;
-		addr = round_up(ei->addr, align);
-		ei_last = ei->addr + ei->size;
-		if (addr < start)
-			addr = round_up(start, align);
-		if (addr >= ei_last)
-			continue;
-		*sizep = ei_last - addr;
-		while (bad_addr_size(&addr, sizep, align) &&
-			addr + *sizep <= ei_last)
-			;
-		last = addr + *sizep;
-		if (last > ei_last)
-			continue;
-		return addr;
-	}
-	return -1UL;
-
-}
-/*
- * Find the highest page frame number we have available
- */
-unsigned long __init e820_end_of_ram(void)
-{
-	unsigned long end_pfn;
-
-	end_pfn = find_max_pfn_with_active_regions();
-
-	if (end_pfn > max_pfn_mapped)
-		max_pfn_mapped = end_pfn;
-	if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT)
-		max_pfn_mapped = MAXMEM>>PAGE_SHIFT;
-	if (end_pfn > end_user_pfn)
-		end_pfn = end_user_pfn;
-	if (end_pfn > max_pfn_mapped)
-		end_pfn = max_pfn_mapped;
-
-	printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped);
-	return end_pfn;
-}
-
-/*
- * Mark e820 reserved areas as busy for the resource manager.
- */
-void __init e820_reserve_resources(void)
-{
-	int i;
-	struct resource *res;
-
-	res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
-	for (i = 0; i < e820.nr_map; i++) {
-		switch (e820.map[i].type) {
-		case E820_RAM:	res->name = "System RAM"; break;
-		case E820_ACPI:	res->name = "ACPI Tables"; break;
-		case E820_NVS:	res->name = "ACPI Non-volatile Storage"; break;
-		default:	res->name = "reserved";
-		}
-		res->start = e820.map[i].addr;
-		res->end = res->start + e820.map[i].size - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		insert_resource(&iomem_resource, res);
-		res++;
-	}
-}
-
-/*
- * Find the ranges of physical addresses that do not correspond to
- * e820 RAM areas and mark the corresponding pages as nosave for software
- * suspend and suspend to RAM.
- *
- * This function requires the e820 map to be sorted and without any
- * overlapping entries and assumes the first e820 area to be RAM.
- */
-void __init e820_mark_nosave_regions(void)
-{
-	int i;
-	unsigned long paddr;
-
-	paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE);
-	for (i = 1; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-
-		if (paddr < ei->addr)
-			register_nosave_region(PFN_DOWN(paddr),
-						PFN_UP(ei->addr));
-
-		paddr = round_down(ei->addr + ei->size, PAGE_SIZE);
-		if (ei->type != E820_RAM)
-			register_nosave_region(PFN_UP(ei->addr),
-						PFN_DOWN(paddr));
-
-		if (paddr >= (end_pfn << PAGE_SHIFT))
-			break;
-	}
-}
-
-/*
- * Finds an active region in the address range from start_pfn to end_pfn and
- * returns its range in ei_startpfn and ei_endpfn for the e820 entry.
- */
-static int __init e820_find_active_region(const struct e820entry *ei,
-					  unsigned long start_pfn,
-					  unsigned long end_pfn,
-					  unsigned long *ei_startpfn,
-					  unsigned long *ei_endpfn)
-{
-	*ei_startpfn = round_up(ei->addr, PAGE_SIZE) >> PAGE_SHIFT;
-	*ei_endpfn = round_down(ei->addr + ei->size, PAGE_SIZE) >> PAGE_SHIFT;
-
-	/* Skip map entries smaller than a page */
-	if (*ei_startpfn >= *ei_endpfn)
-		return 0;
-
-	/* Check if max_pfn_mapped should be updated */
-	if (ei->type != E820_RAM && *ei_endpfn > max_pfn_mapped)
-		max_pfn_mapped = *ei_endpfn;
-
-	/* Skip if map is outside the node */
-	if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
-				    *ei_startpfn >= end_pfn)
-		return 0;
-
-	/* Check for overlaps */
-	if (*ei_startpfn < start_pfn)
-		*ei_startpfn = start_pfn;
-	if (*ei_endpfn > end_pfn)
-		*ei_endpfn = end_pfn;
-
-	/* Obey end_user_pfn to save on memmap */
-	if (*ei_startpfn >= end_user_pfn)
-		return 0;
-	if (*ei_endpfn > end_user_pfn)
-		*ei_endpfn = end_user_pfn;
-
-	return 1;
-}
-
-/* Walk the e820 map and register active regions within a node */
-void __init
-e820_register_active_regions(int nid, unsigned long start_pfn,
-							unsigned long end_pfn)
-{
-	unsigned long ei_startpfn;
-	unsigned long ei_endpfn;
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++)
-		if (e820_find_active_region(&e820.map[i],
-					    start_pfn, end_pfn,
-					    &ei_startpfn, &ei_endpfn))
-			add_active_range(nid, ei_startpfn, ei_endpfn);
-}
-
-/*
- * Add a memory region to the kernel e820 map.
- */
-void __init add_memory_region(unsigned long start, unsigned long size, int type)
-{
-	int x = e820.nr_map;
-
-	if (x == E820MAX) {
-		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
-		return;
-	}
-
-	e820.map[x].addr = start;
-	e820.map[x].size = size;
-	e820.map[x].type = type;
-	e820.nr_map++;
-}
-
-/*
- * Find the hole size (in bytes) in the memory range.
- * @start: starting address of the memory range to scan
- * @end: ending address of the memory range to scan
- */
-unsigned long __init e820_hole_size(unsigned long start, unsigned long end)
-{
-	unsigned long start_pfn = start >> PAGE_SHIFT;
-	unsigned long end_pfn = end >> PAGE_SHIFT;
-	unsigned long ei_startpfn, ei_endpfn, ram = 0;
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		if (e820_find_active_region(&e820.map[i],
-					    start_pfn, end_pfn,
-					    &ei_startpfn, &ei_endpfn))
-			ram += ei_endpfn - ei_startpfn;
-	}
-	return end - start - (ram << PAGE_SHIFT);
-}
-
-static void __init e820_print_map(char *who)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
-		       (unsigned long long) e820.map[i].addr,
-		       (unsigned long long)
-		       (e820.map[i].addr + e820.map[i].size));
-		switch (e820.map[i].type) {
-		case E820_RAM:
-			printk(KERN_CONT "(usable)\n");
-			break;
-		case E820_RESERVED:
-			printk(KERN_CONT "(reserved)\n");
-			break;
-		case E820_ACPI:
-			printk(KERN_CONT "(ACPI data)\n");
-			break;
-		case E820_NVS:
-			printk(KERN_CONT "(ACPI NVS)\n");
-			break;
-		default:
-			printk(KERN_CONT "type %u\n", e820.map[i].type);
-			break;
-		}
-	}
-}
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries. The following
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-static int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map)
-{
-	struct change_member {
-		struct e820entry *pbios; /* pointer to original bios entry */
-		unsigned long long addr; /* address for this change point */
-	};
-	static struct change_member change_point_list[2*E820MAX] __initdata;
-	static struct change_member *change_point[2*E820MAX] __initdata;
-	static struct e820entry *overlap_list[E820MAX] __initdata;
-	static struct e820entry new_bios[E820MAX] __initdata;
-	struct change_member *change_tmp;
-	unsigned long current_type, last_type;
-	unsigned long long last_addr;
-	int chgidx, still_changing;
-	int overlap_entries;
-	int new_bios_entry;
-	int old_nr, new_nr, chg_nr;
-	int i;
-
-	/*
-		Visually we're performing the following
-		(1,2,3,4 = memory types)...
-
-		Sample memory map (w/overlaps):
-		   ____22__________________
-		   ______________________4_
-		   ____1111________________
-		   _44_____________________
-		   11111111________________
-		   ____________________33__
-		   ___________44___________
-		   __________33333_________
-		   ______________22________
-		   ___________________2222_
-		   _________111111111______
-		   _____________________11_
-		   _________________4______
-
-		Sanitized equivalent (no overlap):
-		   1_______________________
-		   _44_____________________
-		   ___1____________________
-		   ____22__________________
-		   ______11________________
-		   _________1______________
-		   __________3_____________
-		   ___________44___________
-		   _____________33_________
-		   _______________2________
-		   ________________1_______
-		   _________________4______
-		   ___________________2____
-		   ____________________33__
-		   ______________________4_
-	*/
-
-	/* if there's only one memory region, don't bother */
-	if (*pnr_map < 2)
-		return -1;
-
-	old_nr = *pnr_map;
-
-	/* bail out if we find any unreasonable addresses in bios map */
-	for (i = 0; i < old_nr; i++)
-		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
-			return -1;
-
-	/* create pointers for initial change-point information (for sorting) */
-	for (i = 0; i < 2 * old_nr; i++)
-		change_point[i] = &change_point_list[i];
-
-	/* record all known change-points (starting and ending addresses),
-	   omitting those that are for empty memory regions */
-	chgidx = 0;
-	for (i = 0; i < old_nr; i++)	{
-		if (biosmap[i].size != 0) {
-			change_point[chgidx]->addr = biosmap[i].addr;
-			change_point[chgidx++]->pbios = &biosmap[i];
-			change_point[chgidx]->addr = biosmap[i].addr +
-				biosmap[i].size;
-			change_point[chgidx++]->pbios = &biosmap[i];
-		}
-	}
-	chg_nr = chgidx;
-
-	/* sort change-point list by memory addresses (low -> high) */
-	still_changing = 1;
-	while (still_changing)	{
-		still_changing = 0;
-		for (i = 1; i < chg_nr; i++)  {
-			unsigned long long curaddr, lastaddr;
-			unsigned long long curpbaddr, lastpbaddr;
-
-			curaddr = change_point[i]->addr;
-			lastaddr = change_point[i - 1]->addr;
-			curpbaddr = change_point[i]->pbios->addr;
-			lastpbaddr = change_point[i - 1]->pbios->addr;
-
-			/*
-			 * swap entries, when:
-			 *
-			 * curaddr > lastaddr or
-			 * curaddr == lastaddr and curaddr == curpbaddr and
-			 * lastaddr != lastpbaddr
-			 */
-			if (curaddr < lastaddr ||
-			    (curaddr == lastaddr && curaddr == curpbaddr &&
-			     lastaddr != lastpbaddr)) {
-				change_tmp = change_point[i];
-				change_point[i] = change_point[i-1];
-				change_point[i-1] = change_tmp;
-				still_changing = 1;
-			}
-		}
-	}
-
-	/* create a new bios memory map, removing overlaps */
-	overlap_entries = 0;	 /* number of entries in the overlap table */
-	new_bios_entry = 0;	 /* index for creating new bios map entries */
-	last_type = 0;		 /* start with undefined memory type */
-	last_addr = 0;		 /* start with 0 as last starting address */
-
-	/* loop through change-points, determining affect on the new bios map */
-	for (chgidx = 0; chgidx < chg_nr; chgidx++) {
-		/* keep track of all overlapping bios entries */
-		if (change_point[chgidx]->addr ==
-		    change_point[chgidx]->pbios->addr) {
-			/*
-			 * add map entry to overlap list (> 1 entry
-			 * implies an overlap)
-			 */
-			overlap_list[overlap_entries++] =
-				change_point[chgidx]->pbios;
-		} else {
-			/*
-			 * remove entry from list (order independent,
-			 * so swap with last)
-			 */
-			for (i = 0; i < overlap_entries; i++) {
-				if (overlap_list[i] ==
-				    change_point[chgidx]->pbios)
-					overlap_list[i] =
-						overlap_list[overlap_entries-1];
-			}
-			overlap_entries--;
-		}
-		/*
-		 * if there are overlapping entries, decide which
-		 * "type" to use (larger value takes precedence --
-		 * 1=usable, 2,3,4,4+=unusable)
-		 */
-		current_type = 0;
-		for (i = 0; i < overlap_entries; i++)
-			if (overlap_list[i]->type > current_type)
-				current_type = overlap_list[i]->type;
-		/*
-		 * continue building up new bios map based on this
-		 * information
-		 */
-		if (current_type != last_type)	{
-			if (last_type != 0)	 {
-				new_bios[new_bios_entry].size =
-					change_point[chgidx]->addr - last_addr;
-				/*
-				 * move forward only if the new size
-				 * was non-zero
-				 */
-				if (new_bios[new_bios_entry].size != 0)
-					/*
-					 * no more space left for new
-					 * bios entries ?
-					 */
-					if (++new_bios_entry >= E820MAX)
-						break;
-			}
-			if (current_type != 0)	{
-				new_bios[new_bios_entry].addr =
-					change_point[chgidx]->addr;
-				new_bios[new_bios_entry].type = current_type;
-				last_addr = change_point[chgidx]->addr;
-			}
-			last_type = current_type;
-		}
-	}
-	/* retain count for new bios entries */
-	new_nr = new_bios_entry;
-
-	/* copy new bios mapping into original location */
-	memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
-	*pnr_map = new_nr;
-
-	return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory.  If we aren't, we'll fake a memory map.
- */
-static int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
-{
-	/* Only one memory region (or negative)? Ignore it */
-	if (nr_map < 2)
-		return -1;
-
-	do {
-		u64 start = biosmap->addr;
-		u64 size = biosmap->size;
-		u64 end = start + size;
-		u32 type = biosmap->type;
-
-		/* Overflow in 64 bits? Ignore the memory map. */
-		if (start > end)
-			return -1;
-
-		add_memory_region(start, size, type);
-	} while (biosmap++, --nr_map);
-	return 0;
-}
-
-static void early_panic(char *msg)
-{
-	early_printk(msg);
-	panic(msg);
-}
-
-/* We're not void only for x86 32-bit compat */
-char * __init machine_specific_memory_setup(void)
-{
-	char *who = "BIOS-e820";
-	/*
-	 * Try to copy the BIOS-supplied E820-map.
-	 *
-	 * Otherwise fake a memory map; one section from 0k->640k,
-	 * the next section from 1mb->appropriate_mem_k
-	 */
-	sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries);
-	if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0)
-		early_panic("Cannot find a valid memory map");
-	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
-	e820_print_map(who);
-
-	/* In case someone cares... */
-	return who;
-}
-
-static int __init parse_memopt(char *p)
-{
-	if (!p)
-		return -EINVAL;
-	end_user_pfn = memparse(p, &p);
-	end_user_pfn >>= PAGE_SHIFT;
-	return 0;
-}
-early_param("mem", parse_memopt);
-
-static int userdef __initdata;
-
-static int __init parse_memmap_opt(char *p)
-{
-	char *oldp;
-	unsigned long long start_at, mem_size;
-
-	if (!strcmp(p, "exactmap")) {
-#ifdef CONFIG_CRASH_DUMP
-		/*
-		 * If we are doing a crash dump, we still need to know
-		 * the real mem size before original memory map is
-		 * reset.
-		 */
-		e820_register_active_regions(0, 0, -1UL);
-		saved_max_pfn = e820_end_of_ram();
-		remove_all_active_ranges();
-#endif
-		max_pfn_mapped = 0;
-		e820.nr_map = 0;
-		userdef = 1;
-		return 0;
-	}
-
-	oldp = p;
-	mem_size = memparse(p, &p);
-	if (p == oldp)
-		return -EINVAL;
-
-	userdef = 1;
-	if (*p == '@') {
-		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, E820_RAM);
-	} else if (*p == '#') {
-		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, E820_ACPI);
-	} else if (*p == '$') {
-		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, E820_RESERVED);
-	} else {
-		end_user_pfn = (mem_size >> PAGE_SHIFT);
-	}
-	return *p == '\0' ? 0 : -EINVAL;
-}
-early_param("memmap", parse_memmap_opt);
-
-void __init finish_e820_parsing(void)
-{
-	if (userdef) {
-		char nr = e820.nr_map;
-
-		if (sanitize_e820_map(e820.map, &nr) < 0)
-			early_panic("Invalid user supplied memory map");
-		e820.nr_map = nr;
-
-		printk(KERN_INFO "user-defined physical RAM map:\n");
-		e820_print_map("user");
-	}
-}
-
-void __init update_memory_range(u64 start, u64 size, unsigned old_type,
-				unsigned new_type)
-{
-	int i;
-
-	BUG_ON(old_type == new_type);
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		u64 final_start, final_end;
-		if (ei->type != old_type)
-			continue;
-		/* totally covered? */
-		if (ei->addr >= start && ei->size <= size) {
-			ei->type = new_type;
-			continue;
-		}
-		/* partially covered */
-		final_start = max(start, ei->addr);
-		final_end = min(start + size, ei->addr + ei->size);
-		if (final_start >= final_end)
-			continue;
-		add_memory_region(final_start, final_end - final_start,
-					 new_type);
-	}
-}
-
-void __init update_e820(void)
-{
-	u8 nr_map;
-
-	nr_map = e820.nr_map;
-	if (sanitize_e820_map(e820.map, &nr_map))
-		return;
-	e820.nr_map = nr_map;
-	printk(KERN_INFO "modified physical RAM map:\n");
-	e820_print_map("modified");
-}
-
-unsigned long pci_mem_start = 0xaeedbabe;
-EXPORT_SYMBOL(pci_mem_start);
-
-/*
- * Search for the biggest gap in the low 32 bits of the e820
- * memory space.  We pass this space to PCI to assign MMIO resources
- * for hotplug or unconfigured devices in.
- * Hopefully the BIOS let enough space left.
- */
-__init void e820_setup_gap(void)
-{
-	unsigned long gapstart, gapsize, round;
-	unsigned long last;
-	int i;
-	int found = 0;
-
-	last = 0x100000000ull;
-	gapstart = 0x10000000;
-	gapsize = 0x400000;
-	i = e820.nr_map;
-	while (--i >= 0) {
-		unsigned long long start = e820.map[i].addr;
-		unsigned long long end = start + e820.map[i].size;
-
-		/*
-		 * Since "last" is at most 4GB, we know we'll
-		 * fit in 32 bits if this condition is true
-		 */
-		if (last > end) {
-			unsigned long gap = last - end;
-
-			if (gap > gapsize) {
-				gapsize = gap;
-				gapstart = end;
-				found = 1;
-			}
-		}
-		if (start < last)
-			last = start;
-	}
-
-	if (!found) {
-		gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
-		printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
-		       "address range\n"
-		       KERN_ERR "PCI: Unassigned devices with 32bit resource "
-		       "registers may break!\n");
-	}
-
-	/*
-	 * See how much we want to round up: start off with
-	 * rounding to the next 1MB area.
-	 */
-	round = 0x100000;
-	while ((gapsize >> 4) > round)
-		round += round;
-	/* Fun with two's complement */
-	pci_mem_start = (gapstart + round) & -round;
-
-	printk(KERN_INFO
-	       "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
-	       pci_mem_start, gapstart, gapsize);
-}
-
-int __init arch_get_ram_range(int slot, u64 *addr, u64 *size)
-{
-	int i;
-
-	if (slot < 0 || slot >= e820.nr_map)
-		return -1;
-	for (i = slot; i < e820.nr_map; i++) {
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		break;
-	}
-	if (i == e820.nr_map || e820.map[i].addr > (max_pfn << PAGE_SHIFT))
-		return -1;
-	*addr = e820.map[i].addr;
-	*size = min_t(u64, e820.map[i].size + e820.map[i].addr,
-		max_pfn << PAGE_SHIFT) - *addr;
-	return i + 1;
-}
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 9f51e1ea9e82..4353cf5e6fac 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -16,10 +16,7 @@
 #include <asm/dma.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
-
-#ifdef CONFIG_GART_IOMMU
-#include <asm/gart.h>
-#endif
+#include <asm/iommu.h>
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
@@ -50,7 +47,7 @@ static void __init fix_hypertransport_config(int num, int slot, int func)
 static void __init via_bugs(int  num, int slot, int func)
 {
 #ifdef CONFIG_GART_IOMMU
-	if ((end_pfn > MAX_DMA32_PFN ||  force_iommu) &&
+	if ((max_pfn > MAX_DMA32_PFN ||  force_iommu) &&
 	    !gart_iommu_aperture_allowed) {
 		printk(KERN_INFO
 		       "Looks like a VIA chipset. Disabling IOMMU."
@@ -98,17 +95,6 @@ static void __init nvidia_bugs(int num, int slot, int func)
 
 }
 
-static void __init ati_bugs(int num, int slot, int func)
-{
-#ifdef CONFIG_X86_IO_APIC
-	if (timer_over_8254 == 1) {
-		timer_over_8254 = 0;
-		printk(KERN_INFO
-		"ATI board detected. Disabling timer routing over 8254.\n");
-	}
-#endif
-}
-
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
 #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -126,14 +112,23 @@ static struct chipset early_qrk[] __initdata = {
 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
 	{ PCI_VENDOR_ID_VIA, PCI_ANY_ID,
 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
-	{ PCI_VENDOR_ID_ATI, PCI_ANY_ID,
-	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, ati_bugs },
 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
 	  PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
 	{}
 };
 
-static void __init check_dev_quirk(int num, int slot, int func)
+/**
+ * check_dev_quirk - apply early quirks to a given PCI device
+ * @num: bus number
+ * @slot: slot number
+ * @func: PCI function
+ *
+ * Check the vendor & device ID against the early quirks table.
+ *
+ * If the device is single function, let early_quirks() know so we don't
+ * poke at this device again.
+ */
+static int __init check_dev_quirk(int num, int slot, int func)
 {
 	u16 class;
 	u16 vendor;
@@ -144,7 +139,7 @@ static void __init check_dev_quirk(int num, int slot, int func)
 	class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
 
 	if (class == 0xffff)
-		return;
+		return -1; /* no class, treat as single function */
 
 	vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
 
@@ -167,7 +162,9 @@ static void __init check_dev_quirk(int num, int slot, int func)
 	type = read_pci_config_byte(num, slot, func,
 				    PCI_HEADER_TYPE);
 	if (!(type & 0x80))
-		return;
+		return -1;
+
+	return 0;
 }
 
 void __init early_quirks(void)
@@ -180,6 +177,9 @@ void __init early_quirks(void)
 	/* Poor man's PCI discovery */
 	for (num = 0; num < 32; num++)
 		for (slot = 0; slot < 32; slot++)
-			for (func = 0; func < 8; func++)
-				check_dev_quirk(num, slot, func);
+			for (func = 0; func < 8; func++) {
+				/* Only probe function 0 on single fn devices */
+				if (check_dev_quirk(num, slot, func))
+					break;
+			}
 }
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 643fd861b724..ff9e7350da54 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -196,7 +196,7 @@ static struct console simnow_console = {
 static struct console *early_console = &early_vga_console;
 static int early_console_initialized;
 
-void early_printk(const char *fmt, ...)
+asmlinkage void early_printk(const char *fmt, ...)
 {
 	char buf[512];
 	int n;
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 77d424cf68b3..06cc8d4254b1 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -64,6 +64,17 @@ static int __init setup_noefi(char *arg)
 }
 early_param("noefi", setup_noefi);
 
+int add_efi_memmap;
+EXPORT_SYMBOL(add_efi_memmap);
+
+static int __init setup_add_efi_memmap(char *arg)
+{
+	add_efi_memmap = 1;
+	return 0;
+}
+early_param("add_efi_memmap", setup_add_efi_memmap);
+
+
 static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
 {
 	return efi_call_virt2(get_time, tm, tc);
@@ -213,6 +224,50 @@ unsigned long efi_get_time(void)
 		      eft.minute, eft.second);
 }
 
+/*
+ * Tell the kernel about the EFI memory map.  This might include
+ * more than the max 128 entries that can fit in the e820 legacy
+ * (zeropage) memory map.
+ */
+
+static void __init do_add_efi_memmap(void)
+{
+	void *p;
+
+	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+		efi_memory_desc_t *md = p;
+		unsigned long long start = md->phys_addr;
+		unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;
+		int e820_type;
+
+		if (md->attribute & EFI_MEMORY_WB)
+			e820_type = E820_RAM;
+		else
+			e820_type = E820_RESERVED;
+		e820_add_region(start, size, e820_type);
+	}
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+}
+
+void __init efi_reserve_early(void)
+{
+	unsigned long pmap;
+
+#ifdef CONFIG_X86_32
+	pmap = boot_params.efi_info.efi_memmap;
+#else
+	pmap = (boot_params.efi_info.efi_memmap |
+		((__u64)boot_params.efi_info.efi_memmap_hi<<32));
+#endif
+	memmap.phys_map = (void *)pmap;
+	memmap.nr_map = boot_params.efi_info.efi_memmap_size /
+		boot_params.efi_info.efi_memdesc_size;
+	memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
+	memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
+	reserve_early(pmap, pmap + memmap.nr_map * memmap.desc_size,
+		      "EFI memmap");
+}
+
 #if EFI_DEBUG
 static void __init print_efi_memmap(void)
 {
@@ -244,19 +299,11 @@ void __init efi_init(void)
 
 #ifdef CONFIG_X86_32
 	efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab;
-	memmap.phys_map = (void *)boot_params.efi_info.efi_memmap;
 #else
 	efi_phys.systab = (efi_system_table_t *)
 		(boot_params.efi_info.efi_systab |
 		 ((__u64)boot_params.efi_info.efi_systab_hi<<32));
-	memmap.phys_map = (void *)
-		(boot_params.efi_info.efi_memmap |
-		 ((__u64)boot_params.efi_info.efi_memmap_hi<<32));
 #endif
-	memmap.nr_map = boot_params.efi_info.efi_memmap_size /
-		boot_params.efi_info.efi_memdesc_size;
-	memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
-	memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
 
 	efi.systab = early_ioremap((unsigned long)efi_phys.systab,
 				   sizeof(efi_system_table_t));
@@ -370,6 +417,8 @@ void __init efi_init(void)
 	if (memmap.desc_size != sizeof(efi_memory_desc_t))
 		printk(KERN_WARNING "Kernel-defined memdesc"
 		       "doesn't match the one from EFI!\n");
+	if (add_efi_memmap)
+		do_add_efi_memmap();
 
 	/* Setup for EFI runtime service */
 	reboot_type = BOOT_EFI;
@@ -424,7 +473,7 @@ void __init efi_enter_virtual_mode(void)
 		size = md->num_pages << EFI_PAGE_SHIFT;
 		end = md->phys_addr + size;
 
-		if (PFN_UP(end) <= max_pfn_mapped)
+		if (PFN_UP(end) <= max_low_pfn_mapped)
 			va = __va(md->phys_addr);
 		else
 			va = efi_ioremap(md->phys_addr, size);
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index d0060fdcccac..652c5287215f 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -97,13 +97,7 @@ void __init efi_call_phys_epilog(void)
 	early_runtime_code_mapping_set_exec(0);
 }
 
-void __init efi_reserve_bootmem(void)
-{
-	reserve_bootmem_generic((unsigned long)memmap.phys_map,
-				memmap.nr_map * memmap.desc_size);
-}
-
-void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size)
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
 {
 	static unsigned pages_mapped __initdata;
 	unsigned i, pages;
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index c778e4fa55a2..109792bc7cfa 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -51,14 +51,25 @@
 #include <asm/percpu.h>
 #include <asm/dwarf2.h>
 #include <asm/processor-flags.h>
-#include "irq_vectors.h"
+#include <asm/ftrace.h>
+#include <asm/irq_vectors.h>
+
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE	   0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysenter_audit	syscall_trace_entry
+#define sysexit_audit	syscall_exit_work
+#endif
 
 /*
  * We use macros for low-level operations which need to be overridden
  * for paravirtualization.  The following will never clobber any registers:
  *   INTERRUPT_RETURN (aka. "iret")
  *   GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
- *   ENABLE_INTERRUPTS_SYSCALL_RET (aka "sti; sysexit").
+ *   ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
  *
  * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
  * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
@@ -331,8 +342,9 @@ sysenter_past_esp:
 	GET_THREAD_INFO(%ebp)
 
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
-	jnz syscall_trace_entry
+	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
+	jnz sysenter_audit
+sysenter_do_call:
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
 	call *sys_call_table(,%eax,4)
@@ -342,14 +354,54 @@ sysenter_past_esp:
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx
-	jne syscall_exit_work
+	jne sysexit_audit
+sysenter_exit:
 /* if something modifies registers it must also disable sysexit */
 	movl PT_EIP(%esp), %edx
 	movl PT_OLDESP(%esp), %ecx
 	xorl %ebp,%ebp
 	TRACE_IRQS_ON
 1:	mov  PT_FS(%esp), %fs
-	ENABLE_INTERRUPTS_SYSCALL_RET
+	ENABLE_INTERRUPTS_SYSEXIT
+
+#ifdef CONFIG_AUDITSYSCALL
+sysenter_audit:
+	testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	jnz syscall_trace_entry
+	addl $4,%esp
+	CFI_ADJUST_CFA_OFFSET -4
+	/* %esi already in 8(%esp)	   6th arg: 4th syscall arg */
+	/* %edx already in 4(%esp)	   5th arg: 3rd syscall arg */
+	/* %ecx already in 0(%esp)	   4th arg: 2nd syscall arg */
+	movl %ebx,%ecx			/* 3rd arg: 1st syscall arg */
+	movl %eax,%edx			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_I386,%eax	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	movl PT_EAX(%esp),%eax		/* reload syscall number */
+	jmp sysenter_do_call
+
+sysexit_audit:
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	movl %eax,%edx		/* second arg, syscall return value */
+	cmpl $0,%eax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%eax		/* zero-extend that */
+	inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	movl TI_flags(%ebp), %ecx
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	movl PT_EAX(%esp),%eax	/* reload syscall return value */
+	jmp sysenter_exit
+#endif
+
 	CFI_ENDPROC
 .pushsection .fixup,"ax"
 2:	movl $0,PT_FS(%esp)
@@ -369,7 +421,7 @@ ENTRY(system_call)
 	GET_THREAD_INFO(%ebp)
 					# system call tracing in operation / emulation
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
 	jnz syscall_trace_entry
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
@@ -382,10 +434,6 @@ syscall_exit:
 					# setting need_resched or sigpending
 					# between sampling and the iret
 	TRACE_IRQS_OFF
-	testl $X86_EFLAGS_TF,PT_EFLAGS(%esp)	# If tracing set singlestep flag on exit
-	jz no_singlestep
-	orl $_TIF_SINGLESTEP,TI_flags(%ebp)
-no_singlestep:
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx	# current->work
 	jne syscall_exit_work
@@ -513,12 +561,8 @@ END(work_pending)
 syscall_trace_entry:
 	movl $-ENOSYS,PT_EAX(%esp)
 	movl %esp, %eax
-	xorl %edx,%edx
-	call do_syscall_trace
-	cmpl $0, %eax
-	jne resume_userspace		# ret != 0 -> running under PTRACE_SYSEMU,
-					# so must skip actual syscall
-	movl PT_ORIG_EAX(%esp), %eax
+	call syscall_trace_enter
+	/* What it returned is what we'll actually use.  */
 	cmpl $(nr_syscalls), %eax
 	jnae syscall_call
 	jmp syscall_exit
@@ -527,14 +571,13 @@ END(syscall_trace_entry)
 	# perform syscall exit tracing
 	ALIGN
 syscall_exit_work:
-	testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
+	testb $_TIF_WORK_SYSCALL_EXIT, %cl
 	jz work_pending
 	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)	# could let do_syscall_trace() call
+	ENABLE_INTERRUPTS(CLBR_ANY)	# could let syscall_trace_leave() call
 					# schedule() instead
 	movl %esp, %eax
-	movl $1, %edx
-	call do_syscall_trace
+	call syscall_trace_leave
 	jmp resume_userspace
 END(syscall_exit_work)
 	CFI_ENDPROC
@@ -874,10 +917,10 @@ ENTRY(native_iret)
 .previous
 END(native_iret)
 
-ENTRY(native_irq_enable_syscall_ret)
+ENTRY(native_irq_enable_sysexit)
 	sti
 	sysexit
-END(native_irq_enable_syscall_ret)
+END(native_irq_enable_sysexit)
 #endif
 
 KPROBE_ENTRY(int3)
@@ -1023,7 +1066,9 @@ ENDPROC(kernel_thread_helper)
 ENTRY(xen_sysenter_target)
 	RING0_INT_FRAME
 	addl $5*4, %esp		/* remove xen-provided frame */
+	CFI_ADJUST_CFA_OFFSET -5*4
 	jmp sysenter_past_esp
+	CFI_ENDPROC
 
 ENTRY(xen_hypervisor_callback)
 	CFI_STARTPROC
@@ -1110,6 +1155,77 @@ ENDPROC(xen_failsafe_callback)
 
 #endif	/* CONFIG_XEN */
 
+#ifdef CONFIG_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+ENTRY(mcount)
+	pushl %eax
+	pushl %ecx
+	pushl %edx
+	movl 0xc(%esp), %eax
+	subl $MCOUNT_INSN_SIZE, %eax
+
+.globl mcount_call
+mcount_call:
+	call ftrace_stub
+
+	popl %edx
+	popl %ecx
+	popl %eax
+
+	ret
+END(mcount)
+
+ENTRY(ftrace_caller)
+	pushl %eax
+	pushl %ecx
+	pushl %edx
+	movl 0xc(%esp), %eax
+	movl 0x4(%ebp), %edx
+	subl $MCOUNT_INSN_SIZE, %eax
+
+.globl ftrace_call
+ftrace_call:
+	call ftrace_stub
+
+	popl %edx
+	popl %ecx
+	popl %eax
+
+.globl ftrace_stub
+ftrace_stub:
+	ret
+END(ftrace_caller)
+
+#else /* ! CONFIG_DYNAMIC_FTRACE */
+
+ENTRY(mcount)
+	cmpl $ftrace_stub, ftrace_trace_function
+	jnz trace
+.globl ftrace_stub
+ftrace_stub:
+	ret
+
+	/* taken from glibc */
+trace:
+	pushl %eax
+	pushl %ecx
+	pushl %edx
+	movl 0xc(%esp), %eax
+	movl 0x4(%ebp), %edx
+	subl $MCOUNT_INSN_SIZE, %eax
+
+	call *ftrace_trace_function
+
+	popl %edx
+	popl %ecx
+	popl %eax
+
+	jmp ftrace_stub
+END(mcount)
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FTRACE */
+
 .section .rodata,"a"
 #include "syscall_table_32.S"
 
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 556a8df522a7..89434d439605 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -51,16 +51,127 @@
 #include <asm/page.h>
 #include <asm/irqflags.h>
 #include <asm/paravirt.h>
+#include <asm/ftrace.h>
+
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE	   0x40000000
 
 	.code64
 
+#ifdef CONFIG_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(mcount)
+
+	subq $0x38, %rsp
+	movq %rax, (%rsp)
+	movq %rcx, 8(%rsp)
+	movq %rdx, 16(%rsp)
+	movq %rsi, 24(%rsp)
+	movq %rdi, 32(%rsp)
+	movq %r8, 40(%rsp)
+	movq %r9, 48(%rsp)
+
+	movq 0x38(%rsp), %rdi
+	subq $MCOUNT_INSN_SIZE, %rdi
+
+.globl mcount_call
+mcount_call:
+	call ftrace_stub
+
+	movq 48(%rsp), %r9
+	movq 40(%rsp), %r8
+	movq 32(%rsp), %rdi
+	movq 24(%rsp), %rsi
+	movq 16(%rsp), %rdx
+	movq 8(%rsp), %rcx
+	movq (%rsp), %rax
+	addq $0x38, %rsp
+
+	retq
+END(mcount)
+
+ENTRY(ftrace_caller)
+
+	/* taken from glibc */
+	subq $0x38, %rsp
+	movq %rax, (%rsp)
+	movq %rcx, 8(%rsp)
+	movq %rdx, 16(%rsp)
+	movq %rsi, 24(%rsp)
+	movq %rdi, 32(%rsp)
+	movq %r8, 40(%rsp)
+	movq %r9, 48(%rsp)
+
+	movq 0x38(%rsp), %rdi
+	movq 8(%rbp), %rsi
+	subq $MCOUNT_INSN_SIZE, %rdi
+
+.globl ftrace_call
+ftrace_call:
+	call ftrace_stub
+
+	movq 48(%rsp), %r9
+	movq 40(%rsp), %r8
+	movq 32(%rsp), %rdi
+	movq 24(%rsp), %rsi
+	movq 16(%rsp), %rdx
+	movq 8(%rsp), %rcx
+	movq (%rsp), %rax
+	addq $0x38, %rsp
+
+.globl ftrace_stub
+ftrace_stub:
+	retq
+END(ftrace_caller)
+
+#else /* ! CONFIG_DYNAMIC_FTRACE */
+ENTRY(mcount)
+	cmpq $ftrace_stub, ftrace_trace_function
+	jnz trace
+.globl ftrace_stub
+ftrace_stub:
+	retq
+
+trace:
+	/* taken from glibc */
+	subq $0x38, %rsp
+	movq %rax, (%rsp)
+	movq %rcx, 8(%rsp)
+	movq %rdx, 16(%rsp)
+	movq %rsi, 24(%rsp)
+	movq %rdi, 32(%rsp)
+	movq %r8, 40(%rsp)
+	movq %r9, 48(%rsp)
+
+	movq 0x38(%rsp), %rdi
+	movq 8(%rbp), %rsi
+	subq $MCOUNT_INSN_SIZE, %rdi
+
+	call   *ftrace_trace_function
+
+	movq 48(%rsp), %r9
+	movq 40(%rsp), %r8
+	movq 32(%rsp), %rdi
+	movq 24(%rsp), %rsi
+	movq 16(%rsp), %rdx
+	movq 8(%rsp), %rcx
+	movq (%rsp), %rax
+	addq $0x38, %rsp
+
+	jmp ftrace_stub
+END(mcount)
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FTRACE */
+
 #ifndef CONFIG_PREEMPT
 #define retint_kernel retint_restore_args
 #endif	
 
 #ifdef CONFIG_PARAVIRT
-ENTRY(native_irq_enable_syscall_ret)
-	movq	%gs:pda_oldrsp,%rsp
+ENTRY(native_usergs_sysret64)
 	swapgs
 	sysretq
 #endif /* CONFIG_PARAVIRT */
@@ -104,7 +215,7 @@ ENTRY(native_irq_enable_syscall_ret)
 	.macro FAKE_STACK_FRAME child_rip
 	/* push in order ss, rsp, eflags, cs, rip */
 	xorl %eax, %eax
-	pushq %rax /* ss */
+	pushq $__KERNEL_DS /* ss */
 	CFI_ADJUST_CFA_OFFSET	8
 	/*CFI_REL_OFFSET	ss,0*/
 	pushq %rax /* rsp */
@@ -169,13 +280,13 @@ ENTRY(ret_from_fork)
 	CFI_ADJUST_CFA_OFFSET -4
 	call schedule_tail
 	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
+	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
 	jnz rff_trace
 rff_action:	
 	RESTORE_REST
 	testl $3,CS-ARGOFFSET(%rsp)	# from kernel_thread?
 	je   int_ret_from_sys_call
-	testl $_TIF_IA32,threadinfo_flags(%rcx)
+	testl $_TIF_IA32,TI_flags(%rcx)
 	jnz  int_ret_from_sys_call
 	RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
 	jmp ret_from_sys_call
@@ -244,8 +355,9 @@ ENTRY(system_call_after_swapgs)
 	movq  %rcx,RIP-ARGOFFSET(%rsp)
 	CFI_REL_OFFSET rip,RIP-ARGOFFSET
 	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
 	jnz tracesys
+system_call_fastpath:
 	cmpq $__NR_syscall_max,%rax
 	ja badsys
 	movq %r10,%rcx
@@ -263,7 +375,7 @@ sysret_check:
 	GET_THREAD_INFO(%rcx)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	movl threadinfo_flags(%rcx),%edx
+	movl TI_flags(%rcx),%edx
 	andl %edi,%edx
 	jnz  sysret_careful 
 	CFI_REMEMBER_STATE
@@ -275,7 +387,8 @@ sysret_check:
 	CFI_REGISTER	rip,rcx
 	RESTORE_ARGS 0,-ARG_SKIP,1
 	/*CFI_REGISTER	rflags,r11*/
-	ENABLE_INTERRUPTS_SYSCALL_RET
+	movq	%gs:pda_oldrsp, %rsp
+	USERGS_SYSRET64
 
 	CFI_RESTORE_STATE
 	/* Handle reschedules */
@@ -296,16 +409,16 @@ sysret_careful:
 sysret_signal:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
-	testl $_TIF_DO_NOTIFY_MASK,%edx
-	jz    1f
-
-	/* Really a signal */
+#ifdef CONFIG_AUDITSYSCALL
+	bt $TIF_SYSCALL_AUDIT,%edx
+	jc sysret_audit
+#endif
 	/* edx:	work flags (arg3) */
 	leaq do_notify_resume(%rip),%rax
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
 	xorl %esi,%esi # oldset -> arg2
 	call ptregscall_common
-1:	movl $_TIF_NEED_RESCHED,%edi
+	movl $_TIF_WORK_MASK,%edi
 	/* Use IRET because user could have changed frame. This
 	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
 	DISABLE_INTERRUPTS(CLBR_NONE)
@@ -316,14 +429,56 @@ badsys:
 	movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
 	jmp ret_from_sys_call
 
+#ifdef CONFIG_AUDITSYSCALL
+	/*
+	 * Fast path for syscall audit without full syscall trace.
+	 * We just call audit_syscall_entry() directly, and then
+	 * jump back to the normal fast path.
+	 */
+auditsys:
+	movq %r10,%r9			/* 6th arg: 4th syscall arg */
+	movq %rdx,%r8			/* 5th arg: 3rd syscall arg */
+	movq %rsi,%rcx			/* 4th arg: 2nd syscall arg */
+	movq %rdi,%rdx			/* 3rd arg: 1st syscall arg */
+	movq %rax,%rsi			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_X86_64,%edi	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	LOAD_ARGS 0		/* reload call-clobbered registers */
+	jmp system_call_fastpath
+
+	/*
+	 * Return fast path for syscall audit.  Call audit_syscall_exit()
+	 * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
+	 * masked off.
+	 */
+sysret_audit:
+	movq %rax,%rsi		/* second arg, syscall return value */
+	cmpq $0,%rax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%edi		/* zero-extend that into %edi */
+	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+	jmp sysret_check
+#endif	/* CONFIG_AUDITSYSCALL */
+
 	/* Do syscall tracing */
 tracesys:			 
+#ifdef CONFIG_AUDITSYSCALL
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+	jz auditsys
+#endif
 	SAVE_REST
 	movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
 	FIXUP_TOP_OF_STACK %rdi
 	movq %rsp,%rdi
 	call syscall_trace_enter
-	LOAD_ARGS ARGOFFSET  /* reload args from stack in case ptrace changed it */
+	/*
+	 * Reload arg registers from stack in case ptrace changed them.
+	 * We don't reload %rax because syscall_trace_enter() returned
+	 * the value it wants us to use in the table lookup.
+	 */
+	LOAD_ARGS ARGOFFSET, 1
 	RESTORE_REST
 	cmpq $__NR_syscall_max,%rax
 	ja   int_ret_from_sys_call	/* RAX(%rsp) set to -ENOSYS above */
@@ -337,6 +492,7 @@ tracesys:
  * Has correct top of stack, but partial stack frame.
  */
 	.globl int_ret_from_sys_call
+	.globl int_with_check
 int_ret_from_sys_call:
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
@@ -347,10 +503,10 @@ int_ret_from_sys_call:
 int_with_check:
 	LOCKDEP_SYS_EXIT_IRQ
 	GET_THREAD_INFO(%rcx)
-	movl threadinfo_flags(%rcx),%edx
+	movl TI_flags(%rcx),%edx
 	andl %edi,%edx
 	jnz   int_careful
-	andl    $~TS_COMPAT,threadinfo_status(%rcx)
+	andl    $~TS_COMPAT,TI_status(%rcx)
 	jmp   retint_swapgs
 
 	/* Either reschedule or signal or syscall exit tracking needed. */
@@ -376,7 +532,7 @@ int_very_careful:
 	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_REST
 	/* Check for syscall exit trace */	
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
+	testl $_TIF_WORK_SYSCALL_EXIT,%edx
 	jz int_signal
 	pushq %rdi
 	CFI_ADJUST_CFA_OFFSET 8
@@ -384,7 +540,7 @@ int_very_careful:
 	call syscall_trace_leave
 	popq %rdi
 	CFI_ADJUST_CFA_OFFSET -8
-	andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi
+	andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
 	jmp int_restore_rest
 	
 int_signal:
@@ -393,7 +549,7 @@ int_signal:
 	movq %rsp,%rdi		# &ptregs -> arg1
 	xorl %esi,%esi		# oldset -> arg2
 	call do_notify_resume
-1:	movl $_TIF_NEED_RESCHED,%edi	
+1:	movl $_TIF_WORK_MASK,%edi
 int_restore_rest:
 	RESTORE_REST
 	DISABLE_INTERRUPTS(CLBR_NONE)
@@ -420,7 +576,6 @@ END(\label)
 	PTREGSCALL stub_clone, sys_clone, %r8
 	PTREGSCALL stub_fork, sys_fork, %rdi
 	PTREGSCALL stub_vfork, sys_vfork, %rdi
-	PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx
 	PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
 	PTREGSCALL stub_iopl, sys_iopl, %rsi
 
@@ -559,7 +714,7 @@ retint_with_reschedule:
 	movl $_TIF_WORK_MASK,%edi
 retint_check:
 	LOCKDEP_SYS_EXIT_IRQ
-	movl threadinfo_flags(%rcx),%edx
+	movl TI_flags(%rcx),%edx
 	andl %edi,%edx
 	CFI_REMEMBER_STATE
 	jnz  retint_careful
@@ -647,17 +802,16 @@ retint_signal:
 	RESTORE_REST
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	movl $_TIF_NEED_RESCHED,%edi
 	GET_THREAD_INFO(%rcx)
-	jmp retint_check
+	jmp retint_with_reschedule
 
 #ifdef CONFIG_PREEMPT
 	/* Returning to kernel space. Check if we need preemption */
 	/* rcx:	 threadinfo. interrupts off. */
 ENTRY(retint_kernel)
-	cmpl $0,threadinfo_preempt_count(%rcx)
+	cmpl $0,TI_preempt_count(%rcx)
 	jnz  retint_restore_args
-	bt  $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
+	bt  $TIF_NEED_RESCHED,TI_flags(%rcx)
 	jnc  retint_restore_args
 	bt   $9,EFLAGS-ARGOFFSET(%rsp)	/* interrupts off? */
 	jnc  retint_restore_args
@@ -711,6 +865,9 @@ END(invalidate_interrupt\num)
 ENTRY(call_function_interrupt)
 	apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
 END(call_function_interrupt)
+ENTRY(call_function_single_interrupt)
+	apicinterrupt CALL_FUNCTION_SINGLE_VECTOR,smp_call_function_single_interrupt
+END(call_function_single_interrupt)
 ENTRY(irq_move_cleanup_interrupt)
 	apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
 END(irq_move_cleanup_interrupt)
@@ -720,6 +877,10 @@ ENTRY(apic_timer_interrupt)
 	apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
 END(apic_timer_interrupt)
 
+ENTRY(uv_bau_message_intr1)
+	apicinterrupt 220,uv_bau_message_interrupt
+END(uv_bau_message_intr1)
+
 ENTRY(error_interrupt)
 	apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
 END(error_interrupt)
@@ -733,6 +894,7 @@ END(spurious_interrupt)
  */ 		
 	.macro zeroentry sym
 	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $0	/* push error code/oldrax */ 
 	CFI_ADJUST_CFA_OFFSET 8
 	pushq %rax	/* push real oldrax to the rdi slot */ 
@@ -745,6 +907,7 @@ END(spurious_interrupt)
 
 	.macro errorentry sym
 	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq %rax
 	CFI_ADJUST_CFA_OFFSET 8
 	CFI_REL_OFFSET rax,0
@@ -814,7 +977,7 @@ paranoid_restore\trace:
 	jmp irq_return
 paranoid_userspace\trace:
 	GET_THREAD_INFO(%rcx)
-	movl threadinfo_flags(%rcx),%ebx
+	movl TI_flags(%rcx),%ebx
 	andl $_TIF_WORK_MASK,%ebx
 	jz paranoid_swapgs\trace
 	movq %rsp,%rdi			/* &pt_regs */
@@ -912,7 +1075,7 @@ error_exit:
 	testl %eax,%eax
 	jne  retint_kernel
 	LOCKDEP_SYS_EXIT_IRQ
-	movl  threadinfo_flags(%rcx),%edx
+	movl  TI_flags(%rcx),%edx
 	movl  $_TIF_WORK_MASK,%edi
 	andl  %edi,%edx
 	jnz  retint_careful
@@ -926,11 +1089,11 @@ error_kernelspace:
 	   iret run with kernel gs again, so don't set the user space flag.
 	   B stepping K8s sometimes report an truncated RIP for IRET 
 	   exceptions returning to compat mode. Check for these here too. */
-	leaq irq_return(%rip),%rbp
-	cmpq %rbp,RIP(%rsp) 
+	leaq irq_return(%rip),%rcx
+	cmpq %rcx,RIP(%rsp)
 	je   error_swapgs
-	movl %ebp,%ebp	/* zero extend */
-	cmpq %rbp,RIP(%rsp) 
+	movl %ecx,%ecx	/* zero extend */
+	cmpq %rcx,RIP(%rsp)
 	je   error_swapgs
 	cmpq $gs_change,RIP(%rsp)
         je   error_swapgs
@@ -939,7 +1102,7 @@ KPROBE_END(error_entry)
 	
        /* Reload gs selector with exception handling */
        /* edi:  new selector */ 
-ENTRY(load_gs_index)
+ENTRY(native_load_gs_index)
 	CFI_STARTPROC
 	pushf
 	CFI_ADJUST_CFA_OFFSET 8
@@ -953,7 +1116,7 @@ gs_change:
 	CFI_ADJUST_CFA_OFFSET -8
         ret
 	CFI_ENDPROC
-ENDPROC(load_gs_index)
+ENDPROC(native_load_gs_index)
        
         .section __ex_table,"a"
         .align 8
@@ -1075,6 +1238,7 @@ END(device_not_available)
 	/* runs on exception stack */
 KPROBE_ENTRY(debug)
  	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $0
 	CFI_ADJUST_CFA_OFFSET 8		
 	paranoidentry do_debug, DEBUG_STACK
@@ -1084,6 +1248,7 @@ KPROBE_END(debug)
 	/* runs on exception stack */	
 KPROBE_ENTRY(nmi)
 	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $-1
 	CFI_ADJUST_CFA_OFFSET 8
 	paranoidentry do_nmi, 0, 0
@@ -1097,6 +1262,7 @@ KPROBE_END(nmi)
 
 KPROBE_ENTRY(int3)
  	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
  	pushq $0
  	CFI_ADJUST_CFA_OFFSET 8
  	paranoidentry do_int3, DEBUG_STACK
@@ -1120,13 +1286,10 @@ ENTRY(coprocessor_segment_overrun)
 	zeroentry do_coprocessor_segment_overrun
 END(coprocessor_segment_overrun)
 
-ENTRY(reserved)
-	zeroentry do_reserved
-END(reserved)
-
 	/* runs on exception stack */
 ENTRY(double_fault)
 	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	paranoidentry do_double_fault
 	jmp paranoid_exit1
 	CFI_ENDPROC
@@ -1143,6 +1306,7 @@ END(segment_not_present)
 	/* runs on exception stack */
 ENTRY(stack_segment)
 	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	paranoidentry do_stack_segment
 	jmp paranoid_exit1
 	CFI_ENDPROC
@@ -1168,6 +1332,7 @@ END(spurious_interrupt_bug)
 	/* runs on exception stack */
 ENTRY(machine_check)
 	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $0
 	CFI_ADJUST_CFA_OFFSET 8	
 	paranoidentry do_machine_check
@@ -1202,3 +1367,103 @@ KPROBE_ENTRY(ignore_sysret)
 	sysret
 	CFI_ENDPROC
 ENDPROC(ignore_sysret)
+
+#ifdef CONFIG_XEN
+ENTRY(xen_hypervisor_callback)
+	zeroentry xen_do_hypervisor_callback
+END(xen_hypervisor_callback)
+
+/*
+# A note on the "critical region" in our callback handler.
+# We want to avoid stacking callback handlers due to events occurring
+# during handling of the last event. To do this, we keep events disabled
+# until we've done all processing. HOWEVER, we must enable events before
+# popping the stack frame (can't be done atomically) and so it would still
+# be possible to get enough handler activations to overflow the stack.
+# Although unlikely, bugs of that kind are hard to track down, so we'd
+# like to avoid the possibility.
+# So, on entry to the handler we detect whether we interrupted an
+# existing activation in its critical region -- if so, we pop the current
+# activation and restart the handler using the previous one.
+*/
+ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
+	CFI_STARTPROC
+/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+   see the correct pointer to the pt_regs */
+	movq %rdi, %rsp            # we don't return, adjust the stack frame
+	CFI_ENDPROC
+	CFI_DEFAULT_STACK
+11:	incl %gs:pda_irqcount
+	movq %rsp,%rbp
+	CFI_DEF_CFA_REGISTER rbp
+	cmovzq %gs:pda_irqstackptr,%rsp
+	pushq %rbp			# backlink for old unwinder
+	call xen_evtchn_do_upcall
+	popq %rsp
+	CFI_DEF_CFA_REGISTER rsp
+	decl %gs:pda_irqcount
+	jmp  error_exit
+	CFI_ENDPROC
+END(do_hypervisor_callback)
+
+/*
+# Hypervisor uses this for application faults while it executes.
+# We get here for two reasons:
+#  1. Fault while reloading DS, ES, FS or GS
+#  2. Fault while executing IRET
+# Category 1 we do not need to fix up as Xen has already reloaded all segment
+# registers that could be reloaded and zeroed the others.
+# Category 2 we fix up by killing the current process. We cannot use the
+# normal Linux return path in this case because if we use the IRET hypercall
+# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+# We distinguish between categories by comparing each saved segment register
+# with its current contents: any discrepancy means we in category 1.
+*/
+ENTRY(xen_failsafe_callback)
+	framesz = (RIP-0x30)	/* workaround buggy gas */
+	_frame framesz
+	CFI_REL_OFFSET rcx, 0
+	CFI_REL_OFFSET r11, 8
+	movw %ds,%cx
+	cmpw %cx,0x10(%rsp)
+	CFI_REMEMBER_STATE
+	jne 1f
+	movw %es,%cx
+	cmpw %cx,0x18(%rsp)
+	jne 1f
+	movw %fs,%cx
+	cmpw %cx,0x20(%rsp)
+	jne 1f
+	movw %gs,%cx
+	cmpw %cx,0x28(%rsp)
+	jne 1f
+	/* All segments match their saved values => Category 2 (Bad IRET). */
+	movq (%rsp),%rcx
+	CFI_RESTORE rcx
+	movq 8(%rsp),%r11
+	CFI_RESTORE r11
+	addq $0x30,%rsp
+	CFI_ADJUST_CFA_OFFSET -0x30
+	pushq $0
+	CFI_ADJUST_CFA_OFFSET 8
+	pushq %r11
+	CFI_ADJUST_CFA_OFFSET 8
+	pushq %rcx
+	CFI_ADJUST_CFA_OFFSET 8
+	jmp general_protection
+	CFI_RESTORE_STATE
+1:	/* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
+	movq (%rsp),%rcx
+	CFI_RESTORE rcx
+	movq 8(%rsp),%r11
+	CFI_RESTORE r11
+	addq $0x30,%rsp
+	CFI_ADJUST_CFA_OFFSET -0x30
+	pushq $0
+	CFI_ADJUST_CFA_OFFSET 8
+	SAVE_ALL
+	jmp error_exit
+	CFI_ENDPROC
+END(xen_failsafe_callback)
+
+#endif /* CONFIG_XEN */
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
new file mode 100644
index 000000000000..ab115cd15fdf
--- /dev/null
+++ b/arch/x86/kernel/ftrace.c
@@ -0,0 +1,141 @@
+/*
+ * Code for replacing ftrace calls with jumps.
+ *
+ * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
+ *
+ * Thanks goes to Ingo Molnar, for suggesting the idea.
+ * Mathieu Desnoyers, for suggesting postponing the modifications.
+ * Arjan van de Ven, for keeping me straight, and explaining to me
+ * the dangers of modifying code on the run.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/hardirq.h>
+#include <linux/ftrace.h>
+#include <linux/percpu.h>
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include <asm/alternative.h>
+#include <asm/ftrace.h>
+
+
+/* Long is fine, even if it is only 4 bytes ;-) */
+static long *ftrace_nop;
+
+union ftrace_code_union {
+	char code[MCOUNT_INSN_SIZE];
+	struct {
+		char e8;
+		int offset;
+	} __attribute__((packed));
+};
+
+
+static int notrace ftrace_calc_offset(long ip, long addr)
+{
+	return (int)(addr - ip);
+}
+
+notrace unsigned char *ftrace_nop_replace(void)
+{
+	return (char *)ftrace_nop;
+}
+
+notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
+{
+	static union ftrace_code_union calc;
+
+	calc.e8		= 0xe8;
+	calc.offset	= ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr);
+
+	/*
+	 * No locking needed, this must be called via kstop_machine
+	 * which in essence is like running on a uniprocessor machine.
+	 */
+	return calc.code;
+}
+
+notrace int
+ftrace_modify_code(unsigned long ip, unsigned char *old_code,
+		   unsigned char *new_code)
+{
+	unsigned replaced;
+	unsigned old = *(unsigned *)old_code; /* 4 bytes */
+	unsigned new = *(unsigned *)new_code; /* 4 bytes */
+	unsigned char newch = new_code[4];
+	int faulted = 0;
+
+	/*
+	 * Note: Due to modules and __init, code can
+	 *  disappear and change, we need to protect against faulting
+	 *  as well as code changing.
+	 *
+	 * No real locking needed, this code is run through
+	 * kstop_machine.
+	 */
+	asm volatile (
+		"1: lock\n"
+		"   cmpxchg %3, (%2)\n"
+		"   jnz 2f\n"
+		"   movb %b4, 4(%2)\n"
+		"2:\n"
+		".section .fixup, \"ax\"\n"
+		"3:	movl $1, %0\n"
+		"	jmp 2b\n"
+		".previous\n"
+		_ASM_EXTABLE(1b, 3b)
+		: "=r"(faulted), "=a"(replaced)
+		: "r"(ip), "r"(new), "c"(newch),
+		  "0"(faulted), "a"(old)
+		: "memory");
+	sync_core();
+
+	if (replaced != old && replaced != new)
+		faulted = 2;
+
+	return faulted;
+}
+
+notrace int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned long ip = (unsigned long)(&ftrace_call);
+	unsigned char old[MCOUNT_INSN_SIZE], *new;
+	int ret;
+
+	memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(ip, (unsigned long)func);
+	ret = ftrace_modify_code(ip, old, new);
+
+	return ret;
+}
+
+notrace int ftrace_mcount_set(unsigned long *data)
+{
+	unsigned long ip = (long)(&mcount_call);
+	unsigned long *addr = data;
+	unsigned char old[MCOUNT_INSN_SIZE], *new;
+
+	/*
+	 * Replace the mcount stub with a pointer to the
+	 * ip recorder function.
+	 */
+	memcpy(old, &mcount_call, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(ip, *addr);
+	*addr = ftrace_modify_code(ip, old, new);
+
+	return 0;
+}
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	const unsigned char *const *noptable = find_nop_table();
+
+	/* This is running in kstop_machine */
+
+	ftrace_mcount_set(data);
+
+	ftrace_nop = (unsigned long *)noptable[MCOUNT_INSN_SIZE];
+
+	return 0;
+}
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index cbaaf69bedb2..1fa8be5bd217 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -51,7 +51,7 @@ void __init setup_apic_routing(void)
 	else
 #endif
 
-	if (num_possible_cpus() <= 8)
+	if (max_physical_apicid < 8)
 		genapic = &apic_flat;
 	else
 		genapic = &apic_physflat;
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 1a9c68845ee8..786548a62d38 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -168,7 +168,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
 	 * May as well be the first.
 	 */
 	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
+	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index ebf13908a743..2cfcbded888a 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -5,9 +5,10 @@
  *
  * SGI UV APIC functions (note: not an Intel compatible APIC)
  *
- * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
  */
 
+#include <linux/kernel.h>
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/string.h>
@@ -20,8 +21,10 @@
 #include <asm/smp.h>
 #include <asm/ipi.h>
 #include <asm/genapic.h>
+#include <asm/pgtable.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
 
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
@@ -38,6 +41,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
 short uv_possible_blades;
 EXPORT_SYMBOL_GPL(uv_possible_blades);
 
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
 /* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
 
 static cpumask_t uv_target_cpus(void)
@@ -55,44 +61,44 @@ static cpumask_t uv_vector_allocation_domain(int cpu)
 int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
 {
 	unsigned long val;
-	int nasid;
+	int pnode;
 
-	nasid = uv_apicid_to_nasid(phys_apicid);
+	pnode = uv_apicid_to_pnode(phys_apicid);
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
 	    APIC_DM_INIT;
-	uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 	mdelay(10);
 
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
 	    APIC_DM_STARTUP;
-	uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 	return 0;
 }
 
 static void uv_send_IPI_one(int cpu, int vector)
 {
 	unsigned long val, apicid, lapicid;
-	int nasid;
+	int pnode;
 
 	apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */
 	lapicid = apicid & 0x3f;		/* ZZZ macro needed */
-	nasid = uv_apicid_to_nasid(apicid);
+	pnode = uv_apicid_to_pnode(apicid);
 	val =
 	    (1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid <<
 					      UVH_IPI_INT_APIC_ID_SHFT) |
 	    (vector << UVH_IPI_INT_VECTOR_SHFT);
-	uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
 
 static void uv_send_IPI_mask(cpumask_t mask, int vector)
 {
 	unsigned int cpu;
 
-	for (cpu = 0; cpu < NR_CPUS; ++cpu)
+	for_each_possible_cpu(cpu)
 		if (cpu_isset(cpu, mask))
 			uv_send_IPI_one(cpu, vector);
 }
@@ -126,7 +132,7 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
 	 * May as well be the first.
 	 */
 	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
+	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
@@ -159,39 +165,163 @@ struct genapic apic_x2apic_uv_x = {
 	.phys_pkg_id = phys_pkg_id,	/* Fixme ZZZ */
 };
 
-static __cpuinit void set_x2apic_extra_bits(int nasid)
+static __cpuinit void set_x2apic_extra_bits(int pnode)
 {
-	__get_cpu_var(x2apic_extra_bits) = ((nasid >> 1) << 6);
+	__get_cpu_var(x2apic_extra_bits) = (pnode << 6);
 }
 
 /*
  * Called on boot cpu.
  */
+static __init int boot_pnode_to_blade(int pnode)
+{
+	int blade;
+
+	for (blade = 0; blade < uv_num_possible_blades(); blade++)
+		if (pnode == uv_blade_info[blade].pnode)
+			return blade;
+	BUG();
+}
+
+struct redir_addr {
+	unsigned long redirect;
+	unsigned long alias;
+};
+
+#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
+
+static __initdata struct redir_addr redir_addrs[] = {
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+};
+
+static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
+{
+	union uvh_si_alias0_overlay_config_u alias;
+	union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
+		alias.v = uv_read_local_mmr(redir_addrs[i].alias);
+		if (alias.s.base == 0) {
+			*size = (1UL << alias.s.m_alias);
+			redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
+			*base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
+			return;
+		}
+	}
+	BUG();
+}
+
+static __init void map_low_mmrs(void)
+{
+	init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
+	init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
+}
+
+enum map_type {map_wb, map_uc};
+
+static void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
+{
+	unsigned long bytes, paddr;
+
+	paddr = base << shift;
+	bytes = (1UL << shift);
+	printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
+	       					paddr + bytes);
+	if (map_type == map_uc)
+		init_extra_mapping_uc(paddr, bytes);
+	else
+		init_extra_mapping_wb(paddr, bytes);
+
+}
+static __init void map_gru_high(int max_pnode)
+{
+	union uvh_rh_gam_gru_overlay_config_mmr_u gru;
+	int shift = UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
+	if (gru.s.enable)
+		map_high("GRU", gru.s.base, shift, map_wb);
+}
+
+static __init void map_config_high(int max_pnode)
+{
+	union uvh_rh_gam_cfg_overlay_config_mmr_u cfg;
+	int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
+	if (cfg.s.enable)
+		map_high("CONFIG", cfg.s.base, shift, map_uc);
+}
+
+static __init void map_mmr_high(int max_pnode)
+{
+	union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
+	int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
+	if (mmr.s.enable)
+		map_high("MMR", mmr.s.base, shift, map_uc);
+}
+
+static __init void map_mmioh_high(int max_pnode)
+{
+	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
+	int shift = UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
+	if (mmioh.s.enable)
+		map_high("MMIOH", mmioh.s.base, shift, map_uc);
+}
+
+static __init void uv_rtc_init(void)
+{
+	long status, ticks_per_sec, drift;
+
+	status =
+	    x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+					&drift);
+	if (status != 0 || ticks_per_sec < 100000) {
+		printk(KERN_WARNING
+			"unable to determine platform RTC clock frequency, "
+			"guessing.\n");
+		/* BIOS gives wrong value for clock freq. so guess */
+		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+	} else
+		sn_rtc_cycles_per_second = ticks_per_sec;
+}
+
 static __init void uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
-	int bytes, nid, cpu, lcpu, nasid, last_nasid, blade;
-	unsigned long mmr_base;
+	union uvh_node_id_u node_id;
+	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
+	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
+	int max_pnode = 0;
+	unsigned long mmr_base, present;
+
+	map_low_mmrs();
 
 	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+	m_val = m_n_config.s.m_skt;
+	n_val = m_n_config.s.n_skt;
 	mmr_base =
 	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
 	    ~UV_MMR_ENABLE;
 	printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
 
-	last_nasid = -1;
-	for_each_possible_cpu(cpu) {
-		nid = cpu_to_node(cpu);
-		nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
-		if (nasid != last_nasid)
-			uv_possible_blades++;
-		last_nasid = nasid;
-	}
+	for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++)
+		uv_possible_blades +=
+		  hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8));
 	printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
 
 	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
 	uv_blade_info = alloc_bootmem_pages(bytes);
 
+	get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
+
 	bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
 	uv_node_to_blade = alloc_bootmem_pages(bytes);
 	memset(uv_node_to_blade, 255, bytes);
@@ -200,43 +330,64 @@ static __init void uv_system_init(void)
 	uv_cpu_to_blade = alloc_bootmem_pages(bytes);
 	memset(uv_cpu_to_blade, 255, bytes);
 
-	last_nasid = -1;
-	blade = -1;
-	lcpu = -1;
-	for_each_possible_cpu(cpu) {
-		nid = cpu_to_node(cpu);
-		nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
-		if (nasid != last_nasid) {
-			blade++;
-			lcpu = -1;
-			uv_blade_info[blade].nr_posible_cpus = 0;
+	blade = 0;
+	for (i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) {
+		present = uv_read_local_mmr(UVH_NODE_PRESENT_TABLE + i * 8);
+		for (j = 0; j < 64; j++) {
+			if (!test_bit(j, &present))
+				continue;
+			uv_blade_info[blade].pnode = (i * 64 + j);
+			uv_blade_info[blade].nr_possible_cpus = 0;
 			uv_blade_info[blade].nr_online_cpus = 0;
+			blade++;
 		}
-		last_nasid = nasid;
-		lcpu++;
+	}
+
+	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+	gnode_upper = (((unsigned long)node_id.s.node_id) &
+		       ~((1 << n_val) - 1)) << m_val;
 
-		uv_cpu_hub_info(cpu)->m_val = m_n_config.s.m_skt;
-		uv_cpu_hub_info(cpu)->n_val = m_n_config.s.n_skt;
+	uv_rtc_init();
+
+	for_each_present_cpu(cpu) {
+		nid = cpu_to_node(cpu);
+		pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
+		blade = boot_pnode_to_blade(pnode);
+		lcpu = uv_blade_info[blade].nr_possible_cpus;
+		uv_blade_info[blade].nr_possible_cpus++;
+
+		uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
+		uv_cpu_hub_info(cpu)->lowmem_remap_top =
+					lowmem_redir_base + lowmem_redir_size;
+		uv_cpu_hub_info(cpu)->m_val = m_val;
+		uv_cpu_hub_info(cpu)->n_val = m_val;
 		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
 		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
-		uv_cpu_hub_info(cpu)->local_nasid = nasid;
-		uv_cpu_hub_info(cpu)->gnode_upper =
-		    nasid & ~((1 << uv_hub_info->n_val) - 1);
+		uv_cpu_hub_info(cpu)->pnode = pnode;
+		uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
+		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
 		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
 		uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
-		uv_blade_info[blade].nasid = nasid;
-		uv_blade_info[blade].nr_posible_cpus++;
 		uv_node_to_blade[nid] = blade;
 		uv_cpu_to_blade[cpu] = blade;
+		max_pnode = max(pnode, max_pnode);
 
-		printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, nasid %d, nid %d\n",
-		       cpu, per_cpu(x86_cpu_to_apicid, cpu), nasid, nid);
-		printk(KERN_DEBUG "UV   lcpu %d, blade %d\n", lcpu, blade);
+		printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, "
+			"lcpu %d, blade %d\n",
+			cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid,
+			lcpu, blade);
 	}
+
+	map_gru_high(max_pnode);
+	map_mmr_high(max_pnode);
+	map_config_high(max_pnode);
+	map_mmioh_high(max_pnode);
 }
 
 /*
  * Called on each cpu to initialize the per_cpu UV data area.
+ * 	ZZZ hotplug not supported yet
  */
 void __cpuinit uv_cpu_init(void)
 {
@@ -246,5 +397,5 @@ void __cpuinit uv_cpu_init(void)
 	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
 
 	if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
-		set_x2apic_extra_bits(uv_hub_info->local_nasid);
+		set_x2apic_extra_bits(uv_hub_info->pnode);
 }
diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c
new file mode 100644
index 000000000000..3e66bd364a9d
--- /dev/null
+++ b/arch/x86/kernel/head.c
@@ -0,0 +1,55 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/bios_ebda.h>
+
+#define BIOS_LOWMEM_KILOBYTES 0x413
+
+/*
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
+ */
+void __init reserve_ebda_region(void)
+{
+	unsigned int lowmem, ebda_addr;
+
+	/* To determine the position of the EBDA and the */
+	/* end of conventional memory, we need to look at */
+	/* the BIOS data area. In a paravirtual environment */
+	/* that area is absent. We'll just have to assume */
+	/* that the paravirt case can handle memory setup */
+	/* correctly, without our help. */
+	if (paravirt_enabled())
+		return;
+
+	/* end of low (conventional) memory */
+	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+	lowmem <<= 10;
+
+	/* start of EBDA area */
+	ebda_addr = get_bios_ebda();
+
+	/* Fixup: bios puts an EBDA in the top 64K segment */
+	/* of conventional memory, but does not adjust lowmem. */
+	if ((lowmem - ebda_addr) <= 0x10000)
+		lowmem = ebda_addr;
+
+	/* Fixup: bios does not report an EBDA at all. */
+	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+		lowmem = 0x9f000;
+
+	/* Paranoia: should never happen, but... */
+	if ((lowmem == 0) || (lowmem >= 0x100000))
+		lowmem = 0x9f000;
+
+	/* reserve all memory between lowmem and the 1MB mark */
+	reserve_early_overlap_ok(lowmem, 0x100000, "BIOS reserved");
+}
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 3db059058927..fa1d25dd83e3 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -8,7 +8,34 @@
 #include <linux/init.h>
 #include <linux/start_kernel.h>
 
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/e820.h>
+#include <asm/bios_ebda.h>
+
 void __init i386_start_kernel(void)
 {
+	reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS");
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* Reserve INITRD */
+	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+		u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+		u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
+		u64 ramdisk_end   = ramdisk_image + ramdisk_size;
+		reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
+	}
+#endif
+	reserve_early(init_pg_tables_start, init_pg_tables_end,
+			"INIT_PG_TABLE");
+
+	reserve_ebda_region();
+
+	/*
+	 * At this point everything still needed from the boot loader
+	 * or BIOS or kernel text should be early reserved or marked not
+	 * RAM in e820. All other memory is free game.
+	 */
+
 	start_kernel();
 }
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index e25c57b8aa84..1b318e903bf6 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -25,6 +25,27 @@
 #include <asm/e820.h>
 #include <asm/bios_ebda.h>
 
+/* boot cpu pda */
+static struct x8664_pda _boot_cpu_pda __read_mostly;
+
+#ifdef CONFIG_SMP
+/*
+ * We install an empty cpu_pda pointer table to indicate to early users
+ * (numa_set_node) that the cpu_pda pointer table for cpus other than
+ * the boot cpu is not yet setup.
+ */
+static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata;
+#else
+static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly;
+#endif
+
+void __init x86_64_init_pda(void)
+{
+	_cpu_pda = __cpu_pda;
+	cpu_pda(0) = &_boot_cpu_pda;
+	pda_init(0);
+}
+
 static void __init zap_identity_mappings(void)
 {
 	pgd_t *pgd = pgd_offset_k(0UL);
@@ -51,74 +72,6 @@ static void __init copy_bootdata(char *real_mode_data)
 	}
 }
 
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
-	unsigned int lowmem, ebda_addr;
-
-	/* To determine the position of the EBDA and the */
-	/* end of conventional memory, we need to look at */
-	/* the BIOS data area. In a paravirtual environment */
-	/* that area is absent. We'll just have to assume */
-	/* that the paravirt case can handle memory setup */
-	/* correctly, without our help. */
-	if (paravirt_enabled())
-		return;
-
-	/* end of low (conventional) memory */
-	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
-	lowmem <<= 10;
-
-	/* start of EBDA area */
-	ebda_addr = get_bios_ebda();
-
-	/* Fixup: bios puts an EBDA in the top 64K segment */
-	/* of conventional memory, but does not adjust lowmem. */
-	if ((lowmem - ebda_addr) <= 0x10000)
-		lowmem = ebda_addr;
-
-	/* Fixup: bios does not report an EBDA at all. */
-	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
-	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
-		lowmem = 0x9f000;
-
-	/* Paranoia: should never happen, but... */
-	if ((lowmem == 0) || (lowmem >= 0x100000))
-		lowmem = 0x9f000;
-
-	/* reserve all memory between lowmem and the 1MB mark */
-	reserve_early(lowmem, 0x100000, "BIOS reserved");
-}
-
-static void __init reserve_setup_data(void)
-{
-	struct setup_data *data;
-	unsigned long pa_data;
-	char buf[32];
-
-	if (boot_params.hdr.version < 0x0209)
-		return;
-	pa_data = boot_params.hdr.setup_data;
-	while (pa_data) {
-		data = early_ioremap(pa_data, sizeof(*data));
-		sprintf(buf, "setup data %x", data->type);
-		reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
-		pa_data = data->next;
-		early_iounmap(data, sizeof(*data));
-	}
-}
-
 void __init x86_64_start_kernel(char * real_mode_data)
 {
 	int i;
@@ -156,10 +109,15 @@ void __init x86_64_start_kernel(char * real_mode_data)
 
 	early_printk("Kernel alive\n");
 
- 	for (i = 0; i < NR_CPUS; i++)
- 		cpu_pda(i) = &boot_cpu_pda[i];
+	x86_64_init_pda();
 
-	pda_init(0);
+	early_printk("Kernel really alive\n");
+
+	x86_64_start_reservations(real_mode_data);
+}
+
+void __init x86_64_start_reservations(char *real_mode_data)
+{
 	copy_bootdata(__va(real_mode_data));
 
 	reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS");
@@ -175,7 +133,6 @@ void __init x86_64_start_kernel(char * real_mode_data)
 #endif
 
 	reserve_ebda_region();
-	reserve_setup_data();
 
 	/*
 	 * At this point everything still needed from the boot loader
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index f7357cc0162c..f67e93441caf 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -194,6 +194,7 @@ default_entry:
 	xorl %ebx,%ebx				/* %ebx is kept at zero */
 
 	movl $pa(pg0), %edi
+	movl %edi, pa(init_pg_tables_start)
 	movl $pa(swapper_pg_pmd), %edx
 	movl $PTE_ATTR, %eax
 10:
@@ -219,6 +220,8 @@ default_entry:
 	jb 10b
 1:
 	movl %edi,pa(init_pg_tables_end)
+	shrl $12, %eax
+	movl %eax, pa(max_pfn_mapped)
 
 	/* Do early initialization of the fixmap area */
 	movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
@@ -228,6 +231,7 @@ default_entry:
 page_pde_offset = (__PAGE_OFFSET >> 20);
 
 	movl $pa(pg0), %edi
+	movl %edi, pa(init_pg_tables_start)
 	movl $pa(swapper_pg_dir), %edx
 	movl $PTE_ATTR, %eax
 10:
@@ -249,6 +253,8 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
 	cmpl %ebp,%eax
 	jb 10b
 	movl %edi,pa(init_pg_tables_end)
+	shrl $12, %eax
+	movl %eax, pa(max_pfn_mapped)
 
 	/* Do early initialization of the fixmap area */
 	movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
@@ -446,10 +452,13 @@ is386:	movl $2,%ecx		# set MP
 	je   1f
 	movl $(__KERNEL_PERCPU), %eax
 	movl %eax,%fs		# set this cpu's percpu
-	jmp initialize_secondary # all other CPUs call initialize_secondary
+	movl (stack_start), %esp
 1:
 #endif /* CONFIG_SMP */
-	jmp i386_start_kernel
+	jmp *(initial_code)
+.align 4
+ENTRY(initial_code)
+	.long i386_start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index b817974ef942..db3280afe886 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -18,6 +18,7 @@
 #include <asm/page.h>
 #include <asm/msr.h>
 #include <asm/cache.h>
+#include <asm/processor-flags.h>
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/asm-offsets.h>
@@ -31,6 +32,13 @@
  *
  */
 
+#define pud_index(x)	(((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+
+L4_PAGE_OFFSET = pgd_index(__PAGE_OFFSET)
+L3_PAGE_OFFSET = pud_index(__PAGE_OFFSET)
+L4_START_KERNEL = pgd_index(__START_KERNEL_map)
+L3_START_KERNEL = pud_index(__START_KERNEL_map)
+
 	.text
 	.section .text.head
 	.code64
@@ -76,8 +84,8 @@ startup_64:
 	/* Fixup the physical addresses in the page table
 	 */
 	addq	%rbp, init_level4_pgt + 0(%rip)
-	addq	%rbp, init_level4_pgt + (258*8)(%rip)
-	addq	%rbp, init_level4_pgt + (511*8)(%rip)
+	addq	%rbp, init_level4_pgt + (L4_PAGE_OFFSET*8)(%rip)
+	addq	%rbp, init_level4_pgt + (L4_START_KERNEL*8)(%rip)
 
 	addq	%rbp, level3_ident_pgt + 0(%rip)
 
@@ -154,9 +162,7 @@ ENTRY(secondary_startup_64)
 	 */
 
 	/* Enable PAE mode and PGE */
-	xorq	%rax, %rax
-	btsq	$5, %rax
-	btsq	$7, %rax
+	movl	$(X86_CR4_PAE | X86_CR4_PGE), %eax
 	movq	%rax, %cr4
 
 	/* Setup early boot stage 4 level pagetables. */
@@ -184,19 +190,15 @@ ENTRY(secondary_startup_64)
 1:	wrmsr				/* Make changes effective */
 
 	/* Setup cr0 */
-#define CR0_PM				1		/* protected mode */
-#define CR0_MP				(1<<1)
-#define CR0_ET				(1<<4)
-#define CR0_NE				(1<<5)
-#define CR0_WP				(1<<16)
-#define CR0_AM				(1<<18)
-#define CR0_PAGING 			(1<<31)
-	movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
+#define CR0_STATE	(X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
+			 X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
+			 X86_CR0_PG)
+	movl	$CR0_STATE, %eax
 	/* Make changes effective */
 	movq	%rax, %cr0
 
 	/* Setup a boot time stack */
-	movq init_rsp(%rip),%rsp
+	movq stack_start(%rip),%rsp
 
 	/* zero EFLAGS after setting rsp */
 	pushq $0
@@ -208,7 +210,7 @@ ENTRY(secondary_startup_64)
 	 * addresses where we're currently running on. We have to do that here
 	 * because in 32bit we couldn't load a 64bit linear address.
 	 */
-	lgdt	cpu_gdt_descr(%rip)
+	lgdt	early_gdt_descr(%rip)
 
 	/* set up data segments. actually 0 would do too */
 	movl $__KERNEL_DS,%eax
@@ -257,8 +259,9 @@ ENTRY(secondary_startup_64)
 	.quad	x86_64_start_kernel
 	__FINITDATA
 
-	ENTRY(init_rsp)
+	ENTRY(stack_start)
 	.quad  init_thread_union+THREAD_SIZE-8
+	.word  0
 
 bad_address:
 	jmp bad_address
@@ -327,11 +330,11 @@ early_idt_ripmsg:
 ENTRY(name)
 
 /* Automate the creation of 1 to 1 mapping pmd entries */
-#define PMDS(START, PERM, COUNT)		\
-	i = 0 ;					\
-	.rept (COUNT) ;				\
-	.quad	(START) + (i << 21) + (PERM) ;	\
-	i = i + 1 ;				\
+#define PMDS(START, PERM, COUNT)			\
+	i = 0 ;						\
+	.rept (COUNT) ;					\
+	.quad	(START) + (i << PMD_SHIFT) + (PERM) ;	\
+	i = i + 1 ;					\
 	.endr
 
 	/*
@@ -342,9 +345,9 @@ ENTRY(name)
 	 */
 NEXT_PAGE(init_level4_pgt)
 	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill	257,8,0
+	.org	init_level4_pgt + L4_PAGE_OFFSET*8, 0
 	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill	252,8,0
+	.org	init_level4_pgt + L4_START_KERNEL*8, 0
 	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
 	.quad	level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
 
@@ -353,7 +356,7 @@ NEXT_PAGE(level3_ident_pgt)
 	.fill	511,8,0
 
 NEXT_PAGE(level3_kernel_pgt)
-	.fill	510,8,0
+	.fill	L3_START_KERNEL,8,0
 	/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
 	.quad	level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
 	.quad	level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
@@ -384,7 +387,7 @@ NEXT_PAGE(level2_kernel_pgt)
 	 *  If you want to increase this then increase MODULES_VADDR
 	 *  too.)
 	 */
-	PMDS(0, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL,
+	PMDS(0, __PAGE_KERNEL_LARGE_EXEC,
 		KERNEL_IMAGE_SIZE/PMD_SIZE)
 
 NEXT_PAGE(level2_spare_pgt)
@@ -395,54 +398,17 @@ NEXT_PAGE(level2_spare_pgt)
 
 	.data
 	.align 16
-	.globl cpu_gdt_descr
-cpu_gdt_descr:
-	.word	gdt_end-cpu_gdt_table-1
-gdt:
-	.quad	cpu_gdt_table
-#ifdef CONFIG_SMP
-	.rept	NR_CPUS-1
-	.word	0
-	.quad	0
-	.endr
-#endif
+	.globl early_gdt_descr
+early_gdt_descr:
+	.word	GDT_ENTRIES*8-1
+	.quad   per_cpu__gdt_page
 
 ENTRY(phys_base)
 	/* This must match the first entry in level2_kernel_pgt */
 	.quad   0x0000000000000000
 
-/* We need valid kernel segments for data and code in long mode too
- * IRET will check the segment types  kkeil 2000/10/28
- * Also sysret mandates a special GDT layout 
- */
-		 		
-	.section .data.page_aligned, "aw"
-	.align PAGE_SIZE
-
-/* The TLS descriptors are currently at a different place compared to i386.
-   Hopefully nobody expects them at a fixed place (Wine?) */
+#include "../../x86/xen/xen-head.S"
 	
-ENTRY(cpu_gdt_table)
-	.quad	0x0000000000000000	/* NULL descriptor */
-	.quad	0x00cf9b000000ffff	/* __KERNEL32_CS */
-	.quad	0x00af9b000000ffff	/* __KERNEL_CS */
-	.quad	0x00cf93000000ffff	/* __KERNEL_DS */
-	.quad	0x00cffb000000ffff	/* __USER32_CS */
-	.quad	0x00cff3000000ffff	/* __USER_DS, __USER32_DS  */
-	.quad	0x00affb000000ffff	/* __USER_CS */
-	.quad	0x0			/* unused */
-	.quad	0,0			/* TSS */
-	.quad	0,0			/* LDT */
-	.quad   0,0,0			/* three TLS descriptors */ 
-	.quad	0x0000f40000000000	/* node/CPU stored in limit */
-gdt_end:	
-	/* asm/segment.h:GDT_ENTRIES must match this */	
-	/* This should be a multiple of the cache line size */
-	/* GDTs of other CPUs are now dynamically allocated */
-
-	/* zero the remaining page */
-	.fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0
-
 	.section .bss, "aw", @nobits
 	.align L1_CACHE_BYTES
 ENTRY(idt_table)
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 9b5cfcdfc426..ad2b15a1334d 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -17,7 +17,7 @@
 
 /* FSEC = 10^-15
    NSEC = 10^-9 */
-#define FSEC_PER_NSEC	1000000
+#define FSEC_PER_NSEC	1000000L
 
 /*
  * HPET address is set in acpi/boot.c, when an ACPI entry exists
@@ -36,26 +36,15 @@ static inline void hpet_writel(unsigned long d, unsigned long a)
 }
 
 #ifdef CONFIG_X86_64
-
 #include <asm/pgtable.h>
-
-static inline void hpet_set_mapping(void)
-{
-	set_fixmap_nocache(FIX_HPET_BASE, hpet_address);
-	__set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE);
-	hpet_virt_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE);
-}
-
-static inline void hpet_clear_mapping(void)
-{
-	hpet_virt_address = NULL;
-}
-
-#else
+#endif
 
 static inline void hpet_set_mapping(void)
 {
 	hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
+#ifdef CONFIG_X86_64
+	__set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE);
+#endif
 }
 
 static inline void hpet_clear_mapping(void)
@@ -63,7 +52,6 @@ static inline void hpet_clear_mapping(void)
 	iounmap(hpet_virt_address);
 	hpet_virt_address = NULL;
 }
-#endif
 
 /*
  * HPET command line enable / disable
@@ -206,20 +194,19 @@ static void hpet_enable_legacy_int(void)
 
 static void hpet_legacy_clockevent_register(void)
 {
-	uint64_t hpet_freq;
-
 	/* Start HPET legacy interrupts */
 	hpet_enable_legacy_int();
 
 	/*
-	 * The period is a femto seconds value. We need to calculate the
-	 * scaled math multiplication factor for nanosecond to hpet tick
-	 * conversion.
+	 * The mult factor is defined as (include/linux/clockchips.h)
+	 *  mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h)
+	 * hpet_period is in units of femtoseconds (per cycle), so
+	 *  mult/2^shift = cyc/ns = 10^6/hpet_period
+	 *  mult = (10^6 * 2^shift)/hpet_period
+	 *  mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period
 	 */
-	hpet_freq = 1000000000000000ULL;
-	do_div(hpet_freq, hpet_period);
-	hpet_clockevent.mult = div_sc((unsigned long) hpet_freq,
-				      NSEC_PER_SEC, hpet_clockevent.shift);
+	hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC,
+				      hpet_period, hpet_clockevent.shift);
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
@@ -324,7 +311,7 @@ static struct clocksource clocksource_hpet = {
 
 static int hpet_clocksource_register(void)
 {
-	u64 tmp, start, now;
+	u64 start, now;
 	cycle_t t1;
 
 	/* Start the counter */
@@ -351,21 +338,15 @@ static int hpet_clocksource_register(void)
 		return -ENODEV;
 	}
 
-	/* Initialize and register HPET clocksource
-	 *
-	 * hpet period is in femto seconds per cycle
-	 * so we need to convert this to ns/cyc units
-	 * approximated by mult/2^shift
-	 *
-	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
-	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
-	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
-	 *  (fsec/cyc << shift)/1000000 = mult
-	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
+	/*
+	 * The definition of mult is (include/linux/clocksource.h)
+	 * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc
+	 * so we first need to convert hpet_period to ns/cyc units:
+	 *  mult/2^shift = ns/cyc = hpet_period/10^6
+	 *  mult = (hpet_period * 2^shift)/10^6
+	 *  mult = (hpet_period << shift)/FSEC_PER_NSEC
 	 */
-	tmp = (u64)hpet_period << HPET_SHIFT;
-	do_div(tmp, FSEC_PER_NSEC);
-	clocksource_hpet.mult = (u32)tmp;
+	clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT);
 
 	clocksource_register(&clocksource_hpet);
 
@@ -487,7 +468,7 @@ void hpet_disable(void)
 #define RTC_NUM_INTS		1
 
 static unsigned long hpet_rtc_flags;
-static unsigned long hpet_prev_update_sec;
+static int hpet_prev_update_sec;
 static struct rtc_time hpet_alarm_time;
 static unsigned long hpet_pie_count;
 static unsigned long hpet_t1_cmp;
@@ -594,6 +575,9 @@ int hpet_set_rtc_irq_bit(unsigned long bit_mask)
 
 	hpet_rtc_flags |= bit_mask;
 
+	if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE))
+		hpet_prev_update_sec = -1;
+
 	if (!oldbits)
 		hpet_rtc_timer_init();
 
@@ -671,7 +655,7 @@ static void hpet_rtc_timer_reinit(void)
 		if (hpet_rtc_flags & RTC_PIE)
 			hpet_pie_count += lost_ints;
 		if (printk_ratelimit())
-			printk(KERN_WARNING "rtc: lost %d interrupts\n",
+			printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n",
 				lost_ints);
 	}
 }
@@ -689,7 +673,8 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 
 	if (hpet_rtc_flags & RTC_UIE &&
 	    curr_time.tm_sec != hpet_prev_update_sec) {
-		rtc_int_flag = RTC_UF;
+		if (hpet_prev_update_sec >= 0)
+			rtc_int_flag = RTC_UF;
 		hpet_prev_update_sec = curr_time.tm_sec;
 	}
 
diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c
index deb43785e923..dd7ebee446af 100644
--- a/arch/x86/kernel/i386_ksyms_32.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
@@ -1,7 +1,14 @@
 #include <linux/module.h>
+
 #include <asm/checksum.h>
-#include <asm/desc.h>
 #include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/ftrace.h>
+
+#ifdef CONFIG_FTRACE
+/* mcount is defined in assembly */
+EXPORT_SYMBOL(mcount);
+#endif
 
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_partial_copy_generic);
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 95e80e5033c3..eb9ddd8efb82 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -162,7 +162,7 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset,
 	int ret;
 
 	if (!cpu_has_fxsr)
-		return -EIO;
+		return -ENODEV;
 
 	ret = init_fpu(target);
 	if (ret)
@@ -179,7 +179,7 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
 	int ret;
 
 	if (!cpu_has_fxsr)
-		return -EIO;
+		return -ENODEV;
 
 	ret = init_fpu(target);
 	if (ret)
diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259.c
index fe631967d625..dc92b49d9204 100644
--- a/arch/x86/kernel/i8259_32.c
+++ b/arch/x86/kernel/i8259.c
@@ -1,8 +1,10 @@
+#include <linux/linkage.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
+#include <linux/timex.h>
 #include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/init.h>
@@ -10,10 +12,12 @@
 #include <linux/sysdev.h>
 #include <linux/bitops.h>
 
+#include <asm/acpi.h>
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/timer.h>
+#include <asm/hw_irq.h>
 #include <asm/pgtable.h>
 #include <asm/delay.h>
 #include <asm/desc.h>
@@ -32,7 +36,7 @@ static int i8259A_auto_eoi;
 DEFINE_SPINLOCK(i8259A_lock);
 static void mask_and_ack_8259A(unsigned int);
 
-static struct irq_chip i8259A_chip = {
+struct irq_chip i8259A_chip = {
 	.name		= "XT-PIC",
 	.mask		= disable_8259A_irq,
 	.disable	= disable_8259A_irq,
@@ -125,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq)
 	int irqmask = 1<<irq;
 
 	if (irq < 8) {
-		outb(0x0B,PIC_MASTER_CMD);	/* ISR register */
+		outb(0x0B, PIC_MASTER_CMD);	/* ISR register */
 		value = inb(PIC_MASTER_CMD) & irqmask;
-		outb(0x0A,PIC_MASTER_CMD);	/* back to the IRR register */
+		outb(0x0A, PIC_MASTER_CMD);	/* back to the IRR register */
 		return value;
 	}
-	outb(0x0B,PIC_SLAVE_CMD);	/* ISR register */
+	outb(0x0B, PIC_SLAVE_CMD);	/* ISR register */
 	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
-	outb(0x0A,PIC_SLAVE_CMD);	/* back to the IRR register */
+	outb(0x0A, PIC_SLAVE_CMD);	/* back to the IRR register */
 	return value;
 }
 
@@ -171,12 +175,14 @@ handle_real_irq:
 	if (irq & 8) {
 		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */
 		outb(cached_slave_mask, PIC_SLAVE_IMR);
-		outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
-		outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
+		/* 'Specific EOI' to slave */
+		outb(0x60+(irq&7), PIC_SLAVE_CMD);
+		 /* 'Specific EOI' to master-IRQ2 */
+		outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD);
 	} else {
 		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
 		outb(cached_master_mask, PIC_MASTER_IMR);
-		outb(0x60+irq,PIC_MASTER_CMD);	/* 'Specific EOI to master */
+		outb(0x60+irq, PIC_MASTER_CMD);	/* 'Specific EOI to master */
 	}
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 	return;
@@ -199,7 +205,8 @@ spurious_8259A_irq:
 		 * lets ACK and report it. [once per IRQ]
 		 */
 		if (!(spurious_irq_mask & irqmask)) {
-			printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
+			printk(KERN_DEBUG
+			       "spurious 8259A interrupt: IRQ%d.\n", irq);
 			spurious_irq_mask |= irqmask;
 		}
 		atomic_inc(&irq_err_count);
@@ -290,17 +297,28 @@ void init_8259A(int auto_eoi)
 	 * outb_pic - this has to work on a wide range of PC hardware.
 	 */
 	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
-	outb_pic(0x20 + 0, PIC_MASTER_IMR);	/* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
-	outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);	/* 8259A-1 (the master) has a slave on IR2 */
+
+	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64,
+	                       to 0x20-0x27 on i386 */
+	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
+
+	/* 8259A-1 (the master) has a slave on IR2 */
+	outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);
+
 	if (auto_eoi)	/* master does Auto EOI */
 		outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
 	else		/* master expects normal EOI */
 		outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
 
 	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
-	outb_pic(0x20 + 8, PIC_SLAVE_IMR);	/* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
-	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);	/* 8259A-2 is a slave on master's IR2 */
-	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+
+	/* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */
+	outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
+	/* 8259A-2 is a slave on master's IR2 */
+	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
+	/* (slave's support for AEOI in flat mode is to be investigated) */
+	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
+
 	if (auto_eoi)
 		/*
 		 * In AEOI mode we just have to mask the interrupt
@@ -317,93 +335,3 @@ void init_8259A(int auto_eoi)
 
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 }
-
-/*
- * Note that on a 486, we don't want to do a SIGFPE on an irq13
- * as the irq is unreliable, and exception 16 works correctly
- * (ie as explained in the intel literature). On a 386, you
- * can't use exception 16 due to bad IBM design, so we have to
- * rely on the less exact irq13.
- *
- * Careful.. Not only is IRQ13 unreliable, but it is also
- * leads to races. IBM designers who came up with it should
- * be shot.
- */
- 
-
-static irqreturn_t math_error_irq(int cpl, void *dev_id)
-{
-	extern void math_error(void __user *);
-	outb(0,0xF0);
-	if (ignore_fpu_irq || !boot_cpu_data.hard_math)
-		return IRQ_NONE;
-	math_error((void __user *)get_irq_regs()->ip);
-	return IRQ_HANDLED;
-}
-
-/*
- * New motherboards sometimes make IRQ 13 be a PCI interrupt,
- * so allow interrupt sharing.
- */
-static struct irqaction fpu_irq = {
-	.handler = math_error_irq,
-	.mask = CPU_MASK_NONE,
-	.name = "fpu",
-};
-
-void __init init_ISA_irqs (void)
-{
-	int i;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	init_bsp_APIC();
-#endif
-	init_8259A(0);
-
-	/*
-	 * 16 old-style INTA-cycle interrupts:
-	 */
-	for (i = 0; i < 16; i++) {
-		set_irq_chip_and_handler_name(i, &i8259A_chip,
-					      handle_level_irq, "XT");
-	}
-}
-
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
-	int i;
-
-	/* all the set up before the call gates are initialised */
-	pre_intr_init_hook();
-
-	/*
-	 * Cover the whole vector space, no vector can escape
-	 * us. (some of these will be overridden and become
-	 * 'special' SMP interrupts)
-	 */
-	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
-		if (i >= NR_IRQS)
-			break;
-		/* SYSCALL_VECTOR was reserved in trap_init. */
-		if (!test_bit(vector, used_vectors))
-			set_intr_gate(vector, interrupt[i]);
-	}
-
-	/* setup after call gates are initialised (usually add in
-	 * the architecture specific gates)
-	 */
-	intr_init_hook();
-
-	/*
-	 * External FPU? Set up irq13 if so, for
-	 * original braindamaged IBM FERR coupling.
-	 */
-	if (boot_cpu_data.hard_math && !cpu_has_fpu)
-		setup_irq(FPU_IRQ, &fpu_irq);
-
-	irq_ctx_init(smp_processor_id());
-}
diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c
deleted file mode 100644
index fa57a1568508..000000000000
--- a/arch/x86/kernel/i8259_64.c
+++ /dev/null
@@ -1,512 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-
-#include <asm/acpi.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/delay.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-/*
- * Common place to define all x86 IRQ vectors
- *
- * This builds up the IRQ handler stubs using some ugly macros in irq.h
- *
- * These macros create the low-level assembly IRQ routines that save
- * register context and call do_IRQ(). do_IRQ() then does all the
- * operations that are needed to keep the AT (or SMP IOAPIC)
- * interrupt-controller happy.
- */
-
-#define BI(x,y) \
-	BUILD_IRQ(x##y)
-
-#define BUILD_16_IRQS(x) \
-	BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
-	BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
-	BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
-	BI(x,c) BI(x,d) BI(x,e) BI(x,f)
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
-				      BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
-BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
-BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
-
-#undef BUILD_16_IRQS
-#undef BI
-
-
-#define IRQ(x,y) \
-	IRQ##x##y##_interrupt
-
-#define IRQLIST_16(x) \
-	IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
-	IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
-	IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
-	IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
-
-/* for the irq vectors */
-static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
-					  IRQLIST_16(0x2), IRQLIST_16(0x3),
-	IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
-	IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
-	IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
-};
-
-#undef IRQ
-#undef IRQLIST_16
-
-/*
- * This is the 'legacy' 8259A Programmable Interrupt Controller,
- * present in the majority of PC/AT boxes.
- * plus some generic x86 specific things if generic specifics makes
- * any sense at all.
- * this file should become arch/i386/kernel/irq.c when the old irq.c
- * moves to arch independent land
- */
-
-static int i8259A_auto_eoi;
-DEFINE_SPINLOCK(i8259A_lock);
-static void mask_and_ack_8259A(unsigned int);
-
-static struct irq_chip i8259A_chip = {
-	.name		= "XT-PIC",
-	.mask		= disable_8259A_irq,
-	.disable	= disable_8259A_irq,
-	.unmask		= enable_8259A_irq,
-	.mask_ack	= mask_and_ack_8259A,
-};
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- */
-unsigned int cached_irq_mask = 0xffff;
-
-/*
- * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
- * boards the timer interrupt is not really connected to any IO-APIC pin,
- * it's fed to the master 8259A's IR0 line only.
- *
- * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
- * this 'mixed mode' IRQ handling costs nothing because it's only used
- * at IRQ setup time.
- */
-unsigned long io_apic_irqs;
-
-void disable_8259A_irq(unsigned int irq)
-{
-	unsigned int mask = 1 << irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	cached_irq_mask |= mask;
-	if (irq & 8)
-		outb(cached_slave_mask, PIC_SLAVE_IMR);
-	else
-		outb(cached_master_mask, PIC_MASTER_IMR);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-void enable_8259A_irq(unsigned int irq)
-{
-	unsigned int mask = ~(1 << irq);
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	cached_irq_mask &= mask;
-	if (irq & 8)
-		outb(cached_slave_mask, PIC_SLAVE_IMR);
-	else
-		outb(cached_master_mask, PIC_MASTER_IMR);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-int i8259A_irq_pending(unsigned int irq)
-{
-	unsigned int mask = 1<<irq;
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	if (irq < 8)
-		ret = inb(PIC_MASTER_CMD) & mask;
-	else
-		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	return ret;
-}
-
-void make_8259A_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	io_apic_irqs &= ~(1<<irq);
-	set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
-				      "XT");
-	enable_irq(irq);
-}
-
-/*
- * This function assumes to be called rarely. Switching between
- * 8259A registers is slow.
- * This has to be protected by the irq controller spinlock
- * before being called.
- */
-static inline int i8259A_irq_real(unsigned int irq)
-{
-	int value;
-	int irqmask = 1<<irq;
-
-	if (irq < 8) {
-		outb(0x0B,PIC_MASTER_CMD);	/* ISR register */
-		value = inb(PIC_MASTER_CMD) & irqmask;
-		outb(0x0A,PIC_MASTER_CMD);	/* back to the IRR register */
-		return value;
-	}
-	outb(0x0B,PIC_SLAVE_CMD);	/* ISR register */
-	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
-	outb(0x0A,PIC_SLAVE_CMD);	/* back to the IRR register */
-	return value;
-}
-
-/*
- * Careful! The 8259A is a fragile beast, it pretty
- * much _has_ to be done exactly like this (mask it
- * first, _then_ send the EOI, and the order of EOI
- * to the two 8259s is important!
- */
-static void mask_and_ack_8259A(unsigned int irq)
-{
-	unsigned int irqmask = 1 << irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	/*
-	 * Lightweight spurious IRQ detection. We do not want
-	 * to overdo spurious IRQ handling - it's usually a sign
-	 * of hardware problems, so we only do the checks we can
-	 * do without slowing down good hardware unnecessarily.
-	 *
-	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
-	 * usually resulting from the 8259A-1|2 PICs) occur
-	 * even if the IRQ is masked in the 8259A. Thus we
-	 * can check spurious 8259A IRQs without doing the
-	 * quite slow i8259A_irq_real() call for every IRQ.
-	 * This does not cover 100% of spurious interrupts,
-	 * but should be enough to warn the user that there
-	 * is something bad going on ...
-	 */
-	if (cached_irq_mask & irqmask)
-		goto spurious_8259A_irq;
-	cached_irq_mask |= irqmask;
-
-handle_real_irq:
-	if (irq & 8) {
-		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */
-		outb(cached_slave_mask, PIC_SLAVE_IMR);
-		/* 'Specific EOI' to slave */
-		outb(0x60+(irq&7),PIC_SLAVE_CMD);
-		 /* 'Specific EOI' to master-IRQ2 */
-		outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD);
-	} else {
-		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
-		outb(cached_master_mask, PIC_MASTER_IMR);
-		/* 'Specific EOI' to master */
-		outb(0x60+irq,PIC_MASTER_CMD);
-	}
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-	return;
-
-spurious_8259A_irq:
-	/*
-	 * this is the slow path - should happen rarely.
-	 */
-	if (i8259A_irq_real(irq))
-		/*
-		 * oops, the IRQ _is_ in service according to the
-		 * 8259A - not spurious, go handle it.
-		 */
-		goto handle_real_irq;
-
-	{
-		static int spurious_irq_mask;
-		/*
-		 * At this point we can be sure the IRQ is spurious,
-		 * lets ACK and report it. [once per IRQ]
-		 */
-		if (!(spurious_irq_mask & irqmask)) {
-			printk(KERN_DEBUG
-			       "spurious 8259A interrupt: IRQ%d.\n", irq);
-			spurious_irq_mask |= irqmask;
-		}
-		atomic_inc(&irq_err_count);
-		/*
-		 * Theoretically we do not have to handle this IRQ,
-		 * but in Linux this does not cause problems and is
-		 * simpler for us.
-		 */
-		goto handle_real_irq;
-	}
-}
-
-static char irq_trigger[2];
-/**
- * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
- */
-static void restore_ELCR(char *trigger)
-{
-	outb(trigger[0], 0x4d0);
-	outb(trigger[1], 0x4d1);
-}
-
-static void save_ELCR(char *trigger)
-{
-	/* IRQ 0,1,2,8,13 are marked as reserved */
-	trigger[0] = inb(0x4d0) & 0xF8;
-	trigger[1] = inb(0x4d1) & 0xDE;
-}
-
-static int i8259A_resume(struct sys_device *dev)
-{
-	init_8259A(i8259A_auto_eoi);
-	restore_ELCR(irq_trigger);
-	return 0;
-}
-
-static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
-{
-	save_ELCR(irq_trigger);
-	return 0;
-}
-
-static int i8259A_shutdown(struct sys_device *dev)
-{
-	/* Put the i8259A into a quiescent state that
-	 * the kernel initialization code can get it
-	 * out of.
-	 */
-	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
-	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-1 */
-	return 0;
-}
-
-static struct sysdev_class i8259_sysdev_class = {
-	.name = "i8259",
-	.suspend = i8259A_suspend,
-	.resume = i8259A_resume,
-	.shutdown = i8259A_shutdown,
-};
-
-static struct sys_device device_i8259A = {
-	.id	= 0,
-	.cls	= &i8259_sysdev_class,
-};
-
-static int __init i8259A_init_sysfs(void)
-{
-	int error = sysdev_class_register(&i8259_sysdev_class);
-	if (!error)
-		error = sysdev_register(&device_i8259A);
-	return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
-void init_8259A(int auto_eoi)
-{
-	unsigned long flags;
-
-	i8259A_auto_eoi = auto_eoi;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
-	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
-
-	/*
-	 * outb_pic - this has to work on a wide range of PC hardware.
-	 */
-	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
-	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
-	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
-	/* 8259A-1 (the master) has a slave on IR2 */
-	outb_pic(0x04, PIC_MASTER_IMR);
-	if (auto_eoi)	/* master does Auto EOI */
-		outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
-	else		/* master expects normal EOI */
-		outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
-
-	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
-	/* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
-	outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
-	/* 8259A-2 is a slave on master's IR2 */
-	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
-	/* (slave's support for AEOI in flat mode is to be investigated) */
-	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
-
-	if (auto_eoi)
-		/*
-		 * In AEOI mode we just have to mask the interrupt
-		 * when acking.
-		 */
-		i8259A_chip.mask_ack = disable_8259A_irq;
-	else
-		i8259A_chip.mask_ack = mask_and_ack_8259A;
-
-	udelay(100);		/* wait for 8259A to initialize */
-
-	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
-	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-
-
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "cascade",
-};
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
-	[0 ... IRQ0_VECTOR - 1] = -1,
-	[IRQ0_VECTOR] = 0,
-	[IRQ1_VECTOR] = 1,
-	[IRQ2_VECTOR] = 2,
-	[IRQ3_VECTOR] = 3,
-	[IRQ4_VECTOR] = 4,
-	[IRQ5_VECTOR] = 5,
-	[IRQ6_VECTOR] = 6,
-	[IRQ7_VECTOR] = 7,
-	[IRQ8_VECTOR] = 8,
-	[IRQ9_VECTOR] = 9,
-	[IRQ10_VECTOR] = 10,
-	[IRQ11_VECTOR] = 11,
-	[IRQ12_VECTOR] = 12,
-	[IRQ13_VECTOR] = 13,
-	[IRQ14_VECTOR] = 14,
-	[IRQ15_VECTOR] = 15,
-	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-void __init init_ISA_irqs (void)
-{
-	int i;
-
-	init_bsp_APIC();
-	init_8259A(0);
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-
-		if (i < 16) {
-			/*
-			 * 16 old-style INTA-cycle interrupts:
-			 */
-			set_irq_chip_and_handler_name(i, &i8259A_chip,
-						      handle_level_irq, "XT");
-		} else {
-			/*
-			 * 'high' PCI IRQs filled in on demand
-			 */
-			irq_desc[i].chip = &no_irq_chip;
-		}
-	}
-}
-
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
-	int i;
-
-	init_ISA_irqs();
-	/*
-	 * Cover the whole vector space, no vector can escape
-	 * us. (some of these will be overridden and become
-	 * 'special' SMP interrupts)
-	 */
-	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
-		if (vector != IA32_SYSCALL_VECTOR)
-			set_intr_gate(vector, interrupt[i]);
-	}
-
-#ifdef CONFIG_SMP
-	/*
-	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
-	 * IPI, driven by wakeup.
-	 */
-	set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
-	/* IPIs for invalidation */
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
-	/* IPI for generic function call */
-	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
-	/* Low priority IPI to cleanup after moving an irq */
-	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
-#endif
-	set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-	set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-
-	/* self generated IPI for local APIC timer */
-	set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
-	/* IPI vectors for APIC spurious and error interrupts */
-	set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-	set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
-	if (!acpi_ioapic)
-		setup_irq(2, &irq2);
-}
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 4dc8600d9d20..de9aa0e3a9c5 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
+#include <linux/bootmem.h>
 #include <linux/mc146818rtc.h>
 #include <linux/compiler.h>
 #include <linux/acpi.h>
@@ -58,7 +59,7 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 static DEFINE_SPINLOCK(ioapic_lock);
 static DEFINE_SPINLOCK(vector_lock);
 
-int timer_over_8254 __initdata = 1;
+int timer_through_8259 __initdata;
 
 /*
  *	Is the SiS APIC rmw bug present ?
@@ -72,15 +73,21 @@ int sis_apic_bug = -1;
 int nr_ioapic_registers[MAX_IO_APICS];
 
 /* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
 /* MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
 /* # of MP IRQ source entries */
 int mp_irq_entries;
 
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
+
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
 static int disable_timer_pin_1 __initdata;
 
 /*
@@ -110,7 +117,7 @@ struct io_apic {
 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
 {
 	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+		+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
 }
 
 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
@@ -239,7 +246,7 @@ static void __init replace_pin_at_irq(unsigned int irq,
 	}
 }
 
-static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable)
+static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable)
 {
 	struct irq_pin_list *entry = irq_2_pin + irq;
 	unsigned int pin, reg;
@@ -259,30 +266,32 @@ static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsign
 }
 
 /* mask = 1 */
-static void __mask_IO_APIC_irq (unsigned int irq)
+static void __mask_IO_APIC_irq(unsigned int irq)
 {
-	__modify_IO_APIC_irq(irq, 0x00010000, 0);
+	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0);
 }
 
 /* mask = 0 */
-static void __unmask_IO_APIC_irq (unsigned int irq)
+static void __unmask_IO_APIC_irq(unsigned int irq)
 {
-	__modify_IO_APIC_irq(irq, 0, 0x00010000);
+	__modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED);
 }
 
 /* mask = 1, trigger = 0 */
-static void __mask_and_edge_IO_APIC_irq (unsigned int irq)
+static void __mask_and_edge_IO_APIC_irq(unsigned int irq)
 {
-	__modify_IO_APIC_irq(irq, 0x00010000, 0x00008000);
+	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED,
+				IO_APIC_REDIR_LEVEL_TRIGGER);
 }
 
 /* mask = 0, trigger = 1 */
-static void __unmask_and_level_IO_APIC_irq (unsigned int irq)
+static void __unmask_and_level_IO_APIC_irq(unsigned int irq)
 {
-	__modify_IO_APIC_irq(irq, 0x00008000, 0x00010000);
+	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER,
+				IO_APIC_REDIR_MASKED);
 }
 
-static void mask_IO_APIC_irq (unsigned int irq)
+static void mask_IO_APIC_irq(unsigned int irq)
 {
 	unsigned long flags;
 
@@ -291,7 +300,7 @@ static void mask_IO_APIC_irq (unsigned int irq)
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
-static void unmask_IO_APIC_irq (unsigned int irq)
+static void unmask_IO_APIC_irq(unsigned int irq)
 {
 	unsigned long flags;
 
@@ -303,7 +312,7 @@ static void unmask_IO_APIC_irq (unsigned int irq)
 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 {
 	struct IO_APIC_route_entry entry;
-	
+
 	/* Check delivery_mode to be sure we're not clearing an SMI pin */
 	entry = ioapic_read_entry(apic, pin);
 	if (entry.delivery_mode == dest_SMI)
@@ -315,7 +324,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 	ioapic_mask_entry(apic, pin);
 }
 
-static void clear_IO_APIC (void)
+static void clear_IO_APIC(void)
 {
 	int apic, pin;
 
@@ -332,7 +341,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
 	struct irq_pin_list *entry = irq_2_pin + irq;
 	unsigned int apicid_value;
 	cpumask_t tmp;
-	
+
 	cpus_and(tmp, cpumask, cpu_online_map);
 	if (cpus_empty(tmp))
 		tmp = TARGET_CPUS;
@@ -361,7 +370,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
 # include <linux/kernel_stat.h>	/* kstat */
 # include <linux/slab.h>		/* kmalloc() */
 # include <linux/timer.h>
- 
+
 #define IRQBALANCE_CHECK_ARCH -999
 #define MAX_BALANCED_IRQ_INTERVAL	(5*HZ)
 #define MIN_BALANCED_IRQ_INTERVAL	(HZ/2)
@@ -373,14 +382,14 @@ static int physical_balance __read_mostly;
 static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL;
 
 static struct irq_cpu_info {
-	unsigned long * last_irq;
-	unsigned long * irq_delta;
+	unsigned long *last_irq;
+	unsigned long *irq_delta;
 	unsigned long irq;
 } irq_cpu_data[NR_CPUS];
 
 #define CPU_IRQ(cpu)		(irq_cpu_data[cpu].irq)
-#define LAST_CPU_IRQ(cpu,irq)   (irq_cpu_data[cpu].last_irq[irq])
-#define IRQ_DELTA(cpu,irq) 	(irq_cpu_data[cpu].irq_delta[irq])
+#define LAST_CPU_IRQ(cpu, irq)   (irq_cpu_data[cpu].last_irq[irq])
+#define IRQ_DELTA(cpu, irq) 	(irq_cpu_data[cpu].irq_delta[irq])
 
 #define IDLE_ENOUGH(cpu,now) \
 	(idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1))
@@ -419,8 +428,8 @@ inside:
 			if (cpu == -1)
 				cpu = NR_CPUS-1;
 		}
-	} while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) ||
-			(search_idle && !IDLE_ENOUGH(cpu,now)));
+	} while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu, allowed_mask) ||
+			(search_idle && !IDLE_ENOUGH(cpu, now)));
 
 	return cpu;
 }
@@ -430,15 +439,14 @@ static inline void balance_irq(int cpu, int irq)
 	unsigned long now = jiffies;
 	cpumask_t allowed_mask;
 	unsigned int new_cpu;
-		
+
 	if (irqbalance_disabled)
-		return; 
+		return;
 
 	cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]);
 	new_cpu = move(cpu, allowed_mask, now, 1);
-	if (cpu != new_cpu) {
+	if (cpu != new_cpu)
 		set_pending_irq(irq, cpumask_of_cpu(new_cpu));
-	}
 }
 
 static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
@@ -450,14 +458,14 @@ static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
 			if (!irq_desc[j].action)
 				continue;
 			/* Is it a significant load ?  */
-			if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) <
+			if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i), j) <
 						useful_load_threshold)
 				continue;
 			balance_irq(i, j);
 		}
 	}
 	balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
-		balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);	
+		balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
 	return;
 }
 
@@ -486,22 +494,22 @@ static void do_irq_balance(void)
 			/* Is this an active IRQ or balancing disabled ? */
 			if (!irq_desc[j].action || irq_balancing_disabled(j))
 				continue;
-			if ( package_index == i )
-				IRQ_DELTA(package_index,j) = 0;
+			if (package_index == i)
+				IRQ_DELTA(package_index, j) = 0;
 			/* Determine the total count per processor per IRQ */
 			value_now = (unsigned long) kstat_cpu(i).irqs[j];
 
 			/* Determine the activity per processor per IRQ */
-			delta = value_now - LAST_CPU_IRQ(i,j);
+			delta = value_now - LAST_CPU_IRQ(i, j);
 
 			/* Update last_cpu_irq[][] for the next time */
-			LAST_CPU_IRQ(i,j) = value_now;
+			LAST_CPU_IRQ(i, j) = value_now;
 
 			/* Ignore IRQs whose rate is less than the clock */
 			if (delta < useful_load_threshold)
 				continue;
 			/* update the load for the processor or package total */
-			IRQ_DELTA(package_index,j) += delta;
+			IRQ_DELTA(package_index, j) += delta;
 
 			/* Keep track of the higher numbered sibling as well */
 			if (i != package_index)
@@ -527,7 +535,8 @@ static void do_irq_balance(void)
 	max_cpu_irq = ULONG_MAX;
 
 tryanothercpu:
-	/* Look for heaviest loaded processor.
+	/*
+	 * Look for heaviest loaded processor.
 	 * We may come back to get the next heaviest loaded processor.
 	 * Skip processors with trivial loads.
 	 */
@@ -536,7 +545,7 @@ tryanothercpu:
 	for_each_online_cpu(i) {
 		if (i != CPU_TO_PACKAGEINDEX(i))
 			continue;
-		if (max_cpu_irq <= CPU_IRQ(i)) 
+		if (max_cpu_irq <= CPU_IRQ(i))
 			continue;
 		if (tmp_cpu_irq < CPU_IRQ(i)) {
 			tmp_cpu_irq = CPU_IRQ(i);
@@ -545,8 +554,9 @@ tryanothercpu:
 	}
 
 	if (tmp_loaded == -1) {
- 	 /* In the case of small number of heavy interrupt sources, 
-	  * loading some of the cpus too much. We use Ingo's original 
+	 /*
+	  * In the case of small number of heavy interrupt sources,
+	  * loading some of the cpus too much. We use Ingo's original
 	  * approach to rotate them around.
 	  */
 		if (!first_attempt && imbalance >= useful_load_threshold) {
@@ -555,13 +565,14 @@ tryanothercpu:
 		}
 		goto not_worth_the_effort;
 	}
-	
+
 	first_attempt = 0;		/* heaviest search */
 	max_cpu_irq = tmp_cpu_irq;	/* load */
 	max_loaded = tmp_loaded;	/* processor */
 	imbalance = (max_cpu_irq - min_cpu_irq) / 2;
-	
-	/* if imbalance is less than approx 10% of max load, then
+
+	/*
+	 * if imbalance is less than approx 10% of max load, then
 	 * observe diminishing returns action. - quit
 	 */
 	if (imbalance < (max_cpu_irq >> 3))
@@ -577,26 +588,25 @@ tryanotherirq:
 		/* Is this an active IRQ? */
 		if (!irq_desc[j].action)
 			continue;
-		if (imbalance <= IRQ_DELTA(max_loaded,j))
+		if (imbalance <= IRQ_DELTA(max_loaded, j))
 			continue;
 		/* Try to find the IRQ that is closest to the imbalance
 		 * without going over.
 		 */
-		if (move_this_load < IRQ_DELTA(max_loaded,j)) {
-			move_this_load = IRQ_DELTA(max_loaded,j);
+		if (move_this_load < IRQ_DELTA(max_loaded, j)) {
+			move_this_load = IRQ_DELTA(max_loaded, j);
 			selected_irq = j;
 		}
 	}
-	if (selected_irq == -1) {
+	if (selected_irq == -1)
 		goto tryanothercpu;
-	}
 
 	imbalance = move_this_load;
-	
+
 	/* For physical_balance case, we accumulated both load
 	 * values in the one of the siblings cpu_irq[],
 	 * to use the same code for physical and logical processors
-	 * as much as possible. 
+	 * as much as possible.
 	 *
 	 * NOTE: the cpu_irq[] array holds the sum of the load for
 	 * sibling A and sibling B in the slot for the lowest numbered
@@ -625,11 +635,11 @@ tryanotherirq:
 		/* mark for change destination */
 		set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded));
 
-		/* Since we made a change, come back sooner to 
+		/* Since we made a change, come back sooner to
 		 * check for more variation.
 		 */
 		balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
-			balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);	
+			balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
 		return;
 	}
 	goto tryanotherirq;
@@ -640,7 +650,7 @@ not_worth_the_effort:
 	 * upward
 	 */
 	balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL,
-		balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);	
+		balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);
 	return;
 }
 
@@ -679,13 +689,13 @@ static int __init balanced_irq_init(void)
 	cpumask_t tmp;
 
 	cpus_shift_right(tmp, cpu_online_map, 2);
-        c = &boot_cpu_data;
+	c = &boot_cpu_data;
 	/* When not overwritten by the command line ask subarchitecture. */
 	if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH)
 		irqbalance_disabled = NO_BALANCE_IRQ;
 	if (irqbalance_disabled)
 		return 0;
-	
+
 	 /* disable irqbalance completely if there is only one processor online */
 	if (num_online_cpus() < 2) {
 		irqbalance_disabled = 1;
@@ -699,16 +709,14 @@ static int __init balanced_irq_init(void)
 		physical_balance = 1;
 
 	for_each_online_cpu(i) {
-		irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
-		irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
+		irq_cpu_data[i].irq_delta = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
+		irq_cpu_data[i].last_irq = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
 		if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) {
 			printk(KERN_ERR "balanced_irq_init: out of memory");
 			goto failed;
 		}
-		memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS);
-		memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS);
 	}
-	
+
 	printk(KERN_INFO "Starting balanced_irq\n");
 	if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd")))
 		return 0;
@@ -748,7 +756,7 @@ void send_IPI_self(int vector)
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write_around(APIC_ICR, cfg);
+	apic_write(APIC_ICR, cfg);
 }
 #endif /* !CONFIG_SMP */
 
@@ -801,10 +809,10 @@ static int find_irq_entry(int apic, int pin, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mpc_irqtype == type &&
-		    (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
-		     mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mpc_dstirq == pin)
+		if (mp_irqs[i].mp_irqtype == type &&
+		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
+		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
+		    mp_irqs[i].mp_dstirq == pin)
 			return i;
 
 	return -1;
@@ -818,13 +826,13 @@ static int __init find_isa_irq_pin(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
 
-			return mp_irqs[i].mpc_dstirq;
+			return mp_irqs[i].mp_dstirq;
 	}
 	return -1;
 }
@@ -834,17 +842,17 @@ static int __init find_isa_irq_apic(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
 			break;
 	}
 	if (i < mp_irq_entries) {
 		int apic;
-		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+		for (apic = 0; apic < nr_ioapics; apic++) {
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
 				return apic;
 		}
 	}
@@ -864,28 +872,28 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 
 	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, "
 		"slot:%d, pin:%d.\n", bus, slot, pin);
-	if (mp_bus_id_to_pci_bus[bus] == -1) {
+	if (test_bit(bus, mp_bus_not_pci)) {
 		printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
 		return -1;
 	}
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
-			    mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
+			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
 				break;
 
 		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mpc_irqtype &&
+		    !mp_irqs[i].mp_irqtype &&
 		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
+		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i, apic, mp_irqs[i].mp_dstirq);
 
 			if (!(apic || IO_APIC_IRQ(irq)))
 				continue;
 
-			if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
+			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
 				return irq;
 			/*
 			 * Use the first all-but-pin matching entry as a
@@ -900,7 +908,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
 
 /*
- * This function currently is only a helper for the i386 smp boot process where 
+ * This function currently is only a helper for the i386 smp boot process where
  * we need to reprogram the ioredtbls to cater for the cpus which have come online
  * so mask in all cases should simply be TARGET_CPUS
  */
@@ -952,7 +960,7 @@ static int EISA_ELCR(unsigned int irq)
  * EISA conforming in the MP table, that means its trigger type must
  * be read in from the ELCR */
 
-#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
+#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
 #define default_EISA_polarity(idx)	default_ISA_polarity(idx)
 
 /* PCI interrupts are always polarity one level triggered,
@@ -969,118 +977,115 @@ static int EISA_ELCR(unsigned int irq)
 
 static int MPBIOS_polarity(int idx)
 {
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 	int polarity;
 
 	/*
 	 * Determine IRQ line polarity (high active or low active):
 	 */
-	switch (mp_irqs[idx].mpc_irqflag & 3)
+	switch (mp_irqs[idx].mp_irqflag & 3) {
+	case 0: /* conforms, ie. bus-type dependent polarity */
 	{
-		case 0: /* conforms, ie. bus-type dependent polarity */
-		{
-			polarity = test_bit(bus, mp_bus_not_pci)?
-				default_ISA_polarity(idx):
-				default_PCI_polarity(idx);
-			break;
-		}
-		case 1: /* high active */
-		{
-			polarity = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-		case 3: /* low active */
-		{
-			polarity = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
+		polarity = test_bit(bus, mp_bus_not_pci)?
+			default_ISA_polarity(idx):
+			default_PCI_polarity(idx);
+		break;
+	}
+	case 1: /* high active */
+	{
+		polarity = 0;
+		break;
+	}
+	case 2: /* reserved */
+	{
+		printk(KERN_WARNING "broken BIOS!!\n");
+		polarity = 1;
+		break;
+	}
+	case 3: /* low active */
+	{
+		polarity = 1;
+		break;
+	}
+	default: /* invalid */
+	{
+		printk(KERN_WARNING "broken BIOS!!\n");
+		polarity = 1;
+		break;
+	}
 	}
 	return polarity;
 }
 
 static int MPBIOS_trigger(int idx)
 {
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 	int trigger;
 
 	/*
 	 * Determine IRQ trigger mode (edge or level sensitive):
 	 */
-	switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
+	switch ((mp_irqs[idx].mp_irqflag>>2) & 3) {
+	case 0: /* conforms, ie. bus-type dependent */
 	{
-		case 0: /* conforms, ie. bus-type dependent */
-		{
-			trigger = test_bit(bus, mp_bus_not_pci)?
-					default_ISA_trigger(idx):
-					default_PCI_trigger(idx);
+		trigger = test_bit(bus, mp_bus_not_pci)?
+				default_ISA_trigger(idx):
+				default_PCI_trigger(idx);
 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
-			switch (mp_bus_id_to_type[bus])
-			{
-				case MP_BUS_ISA: /* ISA pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_EISA: /* EISA pin */
-				{
-					trigger = default_EISA_trigger(idx);
-					break;
-				}
-				case MP_BUS_PCI: /* PCI pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_MCA: /* MCA pin */
-				{
-					trigger = default_MCA_trigger(idx);
-					break;
-				}
-				default:
-				{
-					printk(KERN_WARNING "broken BIOS!!\n");
-					trigger = 1;
-					break;
-				}
-			}
-#endif
+		switch (mp_bus_id_to_type[bus]) {
+		case MP_BUS_ISA: /* ISA pin */
+		{
+			/* set before the switch */
 			break;
 		}
-		case 1: /* edge */
+		case MP_BUS_EISA: /* EISA pin */
 		{
-			trigger = 0;
+			trigger = default_EISA_trigger(idx);
 			break;
 		}
-		case 2: /* reserved */
+		case MP_BUS_PCI: /* PCI pin */
 		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 1;
+			/* set before the switch */
 			break;
 		}
-		case 3: /* level */
+		case MP_BUS_MCA: /* MCA pin */
 		{
-			trigger = 1;
+			trigger = default_MCA_trigger(idx);
 			break;
 		}
-		default: /* invalid */
+		default:
 		{
 			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 0;
+			trigger = 1;
 			break;
 		}
 	}
+#endif
+		break;
+	}
+	case 1: /* edge */
+	{
+		trigger = 0;
+		break;
+	}
+	case 2: /* reserved */
+	{
+		printk(KERN_WARNING "broken BIOS!!\n");
+		trigger = 1;
+		break;
+	}
+	case 3: /* level */
+	{
+		trigger = 1;
+		break;
+	}
+	default: /* invalid */
+	{
+		printk(KERN_WARNING "broken BIOS!!\n");
+		trigger = 0;
+		break;
+	}
+	}
 	return trigger;
 }
 
@@ -1097,16 +1102,16 @@ static inline int irq_trigger(int idx)
 static int pin_2_irq(int idx, int apic, int pin)
 {
 	int irq, i;
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 
 	/*
 	 * Debugging check, we are in big trouble if this message pops up!
 	 */
-	if (mp_irqs[idx].mpc_dstirq != pin)
+	if (mp_irqs[idx].mp_dstirq != pin)
 		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
 
 	if (test_bit(bus, mp_bus_not_pci))
-		irq = mp_irqs[idx].mpc_srcbusirq;
+		irq = mp_irqs[idx].mp_srcbusirq;
 	else {
 		/*
 		 * PCI IRQs are mapped in order
@@ -1148,8 +1153,8 @@ static inline int IO_APIC_irq_trigger(int irq)
 
 	for (apic = 0; apic < nr_ioapics; apic++) {
 		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			idx = find_irq_entry(apic,pin,mp_INT);
-			if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
+			idx = find_irq_entry(apic, pin, mp_INT);
+			if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin)))
 				return irq_trigger(idx);
 		}
 	}
@@ -1164,7 +1169,7 @@ static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }
 
 static int __assign_irq_vector(int irq)
 {
-	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
+	static int current_vector = FIRST_DEVICE_VECTOR, current_offset;
 	int vector, offset;
 
 	BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
@@ -1176,7 +1181,7 @@ static int __assign_irq_vector(int irq)
 	offset = current_offset;
 next:
 	vector += 8;
-	if (vector >= FIRST_SYSTEM_VECTOR) {
+	if (vector >= first_system_vector) {
 		offset = (offset + 1) % 8;
 		vector = FIRST_DEVICE_VECTOR + offset;
 	}
@@ -1203,6 +1208,11 @@ static int assign_irq_vector(int irq)
 
 	return vector;
 }
+
+void setup_vector_irq(int cpu)
+{
+}
+
 static struct irq_chip ioapic_chip;
 
 #define IOAPIC_AUTO	-1
@@ -1237,25 +1247,25 @@ static void __init setup_IO_APIC_irqs(void)
 		/*
 		 * add it to the IO-APIC irq-routing table:
 		 */
-		memset(&entry,0,sizeof(entry));
+		memset(&entry, 0, sizeof(entry));
 
 		entry.delivery_mode = INT_DELIVERY_MODE;
 		entry.dest_mode = INT_DEST_MODE;
 		entry.mask = 0;				/* enable IRQ */
-		entry.dest.logical.logical_dest = 
+		entry.dest.logical.logical_dest =
 					cpu_mask_to_apicid(TARGET_CPUS);
 
-		idx = find_irq_entry(apic,pin,mp_INT);
+		idx = find_irq_entry(apic, pin, mp_INT);
 		if (idx == -1) {
 			if (first_notcon) {
 				apic_printk(APIC_VERBOSE, KERN_DEBUG
 						" IO-APIC (apicid-pin) %d-%d",
-						mp_ioapics[apic].mpc_apicid,
+						mp_ioapics[apic].mp_apicid,
 						pin);
 				first_notcon = 0;
 			} else
 				apic_printk(APIC_VERBOSE, ", %d-%d",
-					mp_ioapics[apic].mpc_apicid, pin);
+					mp_ioapics[apic].mp_apicid, pin);
 			continue;
 		}
 
@@ -1289,7 +1299,7 @@ static void __init setup_IO_APIC_irqs(void)
 			vector = assign_irq_vector(irq);
 			entry.vector = vector;
 			ioapic_register_intr(irq, vector, IOAPIC_AUTO);
-		
+
 			if (!apic && (irq < 16))
 				disable_8259A_irq(irq);
 		}
@@ -1302,25 +1312,21 @@ static void __init setup_IO_APIC_irqs(void)
 }
 
 /*
- * Set up the 8259A-master output pin:
+ * Set up the timer pin, possibly with the 8259A-master behind.
  */
-static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
+static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
+					int vector)
 {
 	struct IO_APIC_route_entry entry;
 
-	memset(&entry,0,sizeof(entry));
-
-	disable_8259A_irq(0);
-
-	/* mask LVT0 */
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+	memset(&entry, 0, sizeof(entry));
 
 	/*
 	 * We use logical delivery to get the timer IRQ
 	 * to the first CPU.
 	 */
 	entry.dest_mode = INT_DEST_MODE;
-	entry.mask = 0;					/* unmask IRQ now */
+	entry.mask = 1;					/* mask IRQ now */
 	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.polarity = 0;
@@ -1329,17 +1335,14 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in
 
 	/*
 	 * The timer IRQ doesn't have to know that behind the
-	 * scene we have a 8259A-master in AEOI mode ...
+	 * scene we may have a 8259A-master in AEOI mode ...
 	 */
-	irq_desc[0].chip = &ioapic_chip;
-	set_irq_handler(0, handle_edge_irq);
+	ioapic_register_intr(0, vector, IOAPIC_EDGE);
 
 	/*
 	 * Add it to the IO-APIC irq-routing table:
 	 */
 	ioapic_write_entry(apic, pin, entry);
-
-	enable_8259A_irq(0);
 }
 
 void __init print_IO_APIC(void)
@@ -1354,10 +1357,10 @@ void __init print_IO_APIC(void)
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
- 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
+	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+		       mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
 
 	/*
 	 * We are a bit conservative about what we expect.  We have to
@@ -1376,7 +1379,7 @@ void __init print_IO_APIC(void)
 		reg_03.raw = io_apic_read(apic, 3);
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
+	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
 	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
 	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
 	printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
@@ -1459,7 +1462,7 @@ void __init print_IO_APIC(void)
 
 #if 0
 
-static void print_APIC_bitfield (int base)
+static void print_APIC_bitfield(int base)
 {
 	unsigned int v;
 	int i, j;
@@ -1480,7 +1483,7 @@ static void print_APIC_bitfield (int base)
 	}
 }
 
-void /*__init*/ print_local_APIC(void * dummy)
+void /*__init*/ print_local_APIC(void *dummy)
 {
 	unsigned int v, ver, maxlvt;
 
@@ -1489,6 +1492,7 @@ void /*__init*/ print_local_APIC(void * dummy)
 
 	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
+	v = apic_read(APIC_ID);
 	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v,
 			GET_APIC_ID(read_apic_id()));
 	v = apic_read(APIC_LVR);
@@ -1563,9 +1567,9 @@ void /*__init*/ print_local_APIC(void * dummy)
 	printk("\n");
 }
 
-void print_all_local_APICs (void)
+void print_all_local_APICs(void)
 {
-	on_each_cpu(print_local_APIC, NULL, 1, 1);
+	on_each_cpu(print_local_APIC, NULL, 1);
 }
 
 void /*__init*/ print_PIC(void)
@@ -1586,11 +1590,11 @@ void /*__init*/ print_PIC(void)
 	v = inb(0xa0) << 8 | inb(0x20);
 	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
 
-	outb(0x0b,0xa0);
-	outb(0x0b,0x20);
+	outb(0x0b, 0xa0);
+	outb(0x0b, 0x20);
 	v = inb(0xa0) << 8 | inb(0x20);
-	outb(0x0a,0xa0);
-	outb(0x0a,0x20);
+	outb(0x0a, 0xa0);
+	outb(0x0a, 0x20);
 
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 
@@ -1626,7 +1630,7 @@ static void __init enable_IO_APIC(void)
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
 	}
-	for(apic = 0; apic < nr_ioapics; apic++) {
+	for (apic = 0; apic < nr_ioapics; apic++) {
 		int pin;
 		/* See if any of the pins is in ExtINT mode */
 		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
@@ -1716,7 +1720,6 @@ void disable_IO_APIC(void)
  * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
  */
 
-#ifndef CONFIG_X86_NUMAQ
 static void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;
@@ -1726,6 +1729,11 @@ static void __init setup_ioapic_ids_from_mpc(void)
 	unsigned char old_id;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_NUMAQ
+	if (found_numaq)
+		return;
+#endif
+
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.
@@ -1748,15 +1756,15 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		spin_lock_irqsave(&ioapic_lock, flags);
 		reg_00.raw = io_apic_read(apic, 0);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
-		
-		old_id = mp_ioapics[apic].mpc_apicid;
 
-		if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
+		old_id = mp_ioapics[apic].mp_apicid;
+
+		if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
-				apic, mp_ioapics[apic].mpc_apicid);
+				apic, mp_ioapics[apic].mp_apicid);
 			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
 				reg_00.bits.ID);
-			mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
+			mp_ioapics[apic].mp_apicid = reg_00.bits.ID;
 		}
 
 		/*
@@ -1765,9 +1773,9 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 * 'stuck on smp_invalidate_needed IPI wait' messages.
 		 */
 		if (check_apicid_used(phys_id_present_map,
-					mp_ioapics[apic].mpc_apicid)) {
+					mp_ioapics[apic].mp_apicid)) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
-				apic, mp_ioapics[apic].mpc_apicid);
+				apic, mp_ioapics[apic].mp_apicid);
 			for (i = 0; i < get_physical_broadcast(); i++)
 				if (!physid_isset(i, phys_id_present_map))
 					break;
@@ -1776,13 +1784,13 @@ static void __init setup_ioapic_ids_from_mpc(void)
 			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
 				i);
 			physid_set(i, phys_id_present_map);
-			mp_ioapics[apic].mpc_apicid = i;
+			mp_ioapics[apic].mp_apicid = i;
 		} else {
 			physid_mask_t tmp;
-			tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
+			tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid);
 			apic_printk(APIC_VERBOSE, "Setting %d in the "
 					"phys_id_present_map\n",
-					mp_ioapics[apic].mpc_apicid);
+					mp_ioapics[apic].mp_apicid);
 			physids_or(phys_id_present_map, phys_id_present_map, tmp);
 		}
 
@@ -1791,21 +1799,21 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 * We need to adjust the IRQ routing table
 		 * if the ID changed.
 		 */
-		if (old_id != mp_ioapics[apic].mpc_apicid)
+		if (old_id != mp_ioapics[apic].mp_apicid)
 			for (i = 0; i < mp_irq_entries; i++)
-				if (mp_irqs[i].mpc_dstapic == old_id)
-					mp_irqs[i].mpc_dstapic
-						= mp_ioapics[apic].mpc_apicid;
+				if (mp_irqs[i].mp_dstapic == old_id)
+					mp_irqs[i].mp_dstapic
+						= mp_ioapics[apic].mp_apicid;
 
 		/*
 		 * Read the right value from the MPC table and
 		 * write it into the ID register.
-	 	 */
+		 */
 		apic_printk(APIC_VERBOSE, KERN_INFO
 			"...changing IO-APIC physical APIC ID to %d ...",
-			mp_ioapics[apic].mpc_apicid);
+			mp_ioapics[apic].mp_apicid);
 
-		reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
+		reg_00.bits.ID = mp_ioapics[apic].mp_apicid;
 		spin_lock_irqsave(&ioapic_lock, flags);
 		io_apic_write(apic, 0, reg_00.raw);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -1816,15 +1824,12 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		spin_lock_irqsave(&ioapic_lock, flags);
 		reg_00.raw = io_apic_read(apic, 0);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
-		if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
+		if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid)
 			printk("could not set ID!\n");
 		else
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
 }
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
 
 int no_timer_check __initdata;
 
@@ -2015,45 +2020,53 @@ static inline void init_IO_APIC_traps(void)
  * The local APIC irq-chip implementation:
  */
 
-static void ack_apic(unsigned int irq)
+static void ack_lapic_irq(unsigned int irq)
 {
 	ack_APIC_irq();
 }
 
-static void mask_lapic_irq (unsigned int irq)
+static void mask_lapic_irq(unsigned int irq)
 {
 	unsigned long v;
 
 	v = apic_read(APIC_LVT0);
-	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
 }
 
-static void unmask_lapic_irq (unsigned int irq)
+static void unmask_lapic_irq(unsigned int irq)
 {
 	unsigned long v;
 
 	v = apic_read(APIC_LVT0);
-	apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
 }
 
 static struct irq_chip lapic_chip __read_mostly = {
-	.name		= "local-APIC-edge",
+	.name		= "local-APIC",
 	.mask		= mask_lapic_irq,
 	.unmask		= unmask_lapic_irq,
-	.eoi		= ack_apic,
+	.ack		= ack_lapic_irq,
 };
 
+static void lapic_register_intr(int irq, int vector)
+{
+	irq_desc[irq].status &= ~IRQ_LEVEL;
+	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
+				      "edge");
+	set_intr_gate(vector, interrupt[irq]);
+}
+
 static void __init setup_nmi(void)
 {
 	/*
- 	 * Dirty trick to enable the NMI watchdog ...
+	 * Dirty trick to enable the NMI watchdog ...
 	 * We put the 8259A master into AEOI mode and
 	 * unmask on all local APICs LVT0 as NMI.
 	 *
 	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
 	 * is from Maciej W. Rozycki - so we do not have to EOI from
 	 * the NMI handler or the timer interrupt.
-	 */ 
+	 */
 	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
 
 	enable_NMI_through_LVT0();
@@ -2129,11 +2142,16 @@ static inline void __init unlock_ExtINT_logic(void)
 static inline void __init check_timer(void)
 {
 	int apic1, pin1, apic2, pin2;
+	int no_pin1 = 0;
 	int vector;
+	unsigned int ver;
 	unsigned long flags;
 
 	local_irq_save(flags);
 
+	ver = apic_read(APIC_LVR);
+	ver = GET_APIC_VERSION(ver);
+
 	/*
 	 * get/set the timer IRQ vector:
 	 */
@@ -2142,34 +2160,54 @@ static inline void __init check_timer(void)
 	set_intr_gate(vector, interrupt[0]);
 
 	/*
-	 * Subtle, code in do_timer_interrupt() expects an AEOI
-	 * mode for the 8259A whenever interrupts are routed
-	 * through I/O APICs.  Also IRQ0 has to be enabled in
-	 * the 8259A which implies the virtual wire has to be
-	 * disabled in the local APIC.
+	 * As IRQ0 is to be enabled in the 8259A, the virtual
+	 * wire has to be disabled in the local APIC.  Also
+	 * timer interrupts need to be acknowledged manually in
+	 * the 8259A for the i82489DX when using the NMI
+	 * watchdog as that APIC treats NMIs as level-triggered.
+	 * The AEOI mode will finish them in the 8259A
+	 * automatically.
 	 */
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
-	timer_ack = 1;
-	if (timer_over_8254 > 0)
-		enable_8259A_irq(0);
+	timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		vector, apic1, pin1, apic2, pin2);
+	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		    vector, apic1, pin1, apic2, pin2);
+
+	/*
+	 * Some BIOS writers are clueless and report the ExtINTA
+	 * I/O APIC input from the cascaded 8259A as the timer
+	 * interrupt input.  So just in case, if only one pin
+	 * was found above, try it both directly and through the
+	 * 8259A.
+	 */
+	if (pin1 == -1) {
+		pin1 = pin2;
+		apic1 = apic2;
+		no_pin1 = 1;
+	} else if (pin2 == -1) {
+		pin2 = pin1;
+		apic2 = apic1;
+	}
 
 	if (pin1 != -1) {
 		/*
 		 * Ok, does IRQ0 through the IOAPIC work?
 		 */
+		if (no_pin1) {
+			add_pin_to_irq(0, apic1, pin1);
+			setup_timer_IRQ0_pin(apic1, pin1, vector);
+		}
 		unmask_IO_APIC_irq(0);
 		if (timer_irq_works()) {
 			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
 				setup_nmi();
 				enable_8259A_irq(0);
 			}
@@ -2178,81 +2216,97 @@ static inline void __init check_timer(void)
 			goto out;
 		}
 		clear_IO_APIC_pin(apic1, pin1);
-		printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
-				"IO-APIC\n");
-	}
-
-	printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
-	if (pin2 != -1) {
-		printk("\n..... (found pin %d) ...", pin2);
+		if (!no_pin1)
+			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
+				    "8254 timer not connected to IO-APIC\n");
+
+		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+			    "(IRQ0) through the 8259A ...\n");
+		apic_printk(APIC_QUIET, KERN_INFO
+			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
+		replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
+		setup_timer_IRQ0_pin(apic2, pin2, vector);
+		unmask_IO_APIC_irq(0);
+		enable_8259A_irq(0);
 		if (timer_irq_works()) {
-			printk("works.\n");
-			if (pin1 != -1)
-				replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
-			else
-				add_pin_to_irq(0, apic2, pin2);
+			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
+			timer_through_8259 = 1;
 			if (nmi_watchdog == NMI_IO_APIC) {
+				disable_8259A_irq(0);
 				setup_nmi();
+				enable_8259A_irq(0);
 			}
 			goto out;
 		}
 		/*
 		 * Cleanup, just in case ...
 		 */
+		disable_8259A_irq(0);
 		clear_IO_APIC_pin(apic2, pin2);
+		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
-	printk(" failed.\n");
 
 	if (nmi_watchdog == NMI_IO_APIC) {
-		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = 0;
+		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+			    "through the IO-APIC - disabling NMI Watchdog!\n");
+		nmi_watchdog = NMI_NONE;
 	}
+	timer_ack = 0;
 
-	printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as Virtual Wire IRQ...\n");
 
-	disable_8259A_irq(0);
-	set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq,
-				      "fasteoi");
-	apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
+	lapic_register_intr(0, vector);
+	apic_write(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
 	enable_8259A_irq(0);
 
 	if (timer_irq_works()) {
-		printk(" works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
-	printk(" failed.\n");
+	disable_8259A_irq(0);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
 
-	printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as ExtINT IRQ...\n");
 
-	timer_ack = 0;
 	init_8259A(0);
 	make_8259A_irq(0);
-	apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
 
 	unlock_ExtINT_logic();
 
 	if (timer_irq_works()) {
-		printk(" works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
-	printk(" failed :(.\n");
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
 	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
-		"report.  Then try booting with the 'noapic' option");
+		"report.  Then try booting with the 'noapic' option.\n");
 out:
 	local_irq_restore(flags);
 }
 
 /*
- *
- * IRQ's that are handled by the PIC in the MPS IOAPIC case.
- * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
- *   Linux doesn't really care, as it's not actually used
- *   for any interrupt handling anyway.
+ * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
+ * to devices.  However there may be an I/O APIC pin available for
+ * this interrupt regardless.  The pin may be left unconnected, but
+ * typically it will be reused as an ExtINT cascade interrupt for
+ * the master 8259A.  In the MPS case such a pin will normally be
+ * reported as an ExtINT interrupt in the MP table.  With ACPI
+ * there is no provision for ExtINT interrupts, and in the absence
+ * of an override it would be treated as an ordinary ISA I/O APIC
+ * interrupt, that is edge-triggered and unmasked by default.  We
+ * used to do this, but it caused problems on some systems because
+ * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
+ * the same ExtINT cascade interrupt to drive the local APIC of the
+ * bootstrap processor.  Therefore we refrain from routing IRQ2 to
+ * the I/O APIC in all cases now.  No actual device should request
+ * it anyway.  --macro
  */
 #define PIC_IRQS	(1 << PIC_CASCADE_IR)
 
@@ -2261,15 +2315,12 @@ void __init setup_IO_APIC(void)
 	int i;
 
 	/* Reserve all the system vectors. */
-	for (i = FIRST_SYSTEM_VECTOR; i < NR_VECTORS; i++)
+	for (i = first_system_vector; i < NR_VECTORS; i++)
 		set_bit(i, used_vectors);
 
 	enable_IO_APIC();
 
-	if (acpi_ioapic)
-		io_apic_irqs = ~0;	/* all IRQs go through IOAPIC */
-	else
-		io_apic_irqs = ~PIC_IRQS;
+	io_apic_irqs = ~PIC_IRQS;
 
 	printk("ENABLING IO-APIC IRQs\n");
 
@@ -2286,28 +2337,14 @@ void __init setup_IO_APIC(void)
 		print_IO_APIC();
 }
 
-static int __init setup_disable_8254_timer(char *s)
-{
-	timer_over_8254 = -1;
-	return 1;
-}
-static int __init setup_enable_8254_timer(char *s)
-{
-	timer_over_8254 = 2;
-	return 1;
-}
-
-__setup("disable_8254_timer", setup_disable_8254_timer);
-__setup("enable_8254_timer", setup_enable_8254_timer);
-
 /*
  *	Called after all the initialization is done. If we didnt find any
  *	APIC bugs then we can allow the modify fast path
  */
- 
+
 static int __init io_apic_bug_finalize(void)
 {
-	if(sis_apic_bug == -1)
+	if (sis_apic_bug == -1)
 		sis_apic_bug = 0;
 	return 0;
 }
@@ -2318,17 +2355,17 @@ struct sysfs_ioapic_data {
 	struct sys_device dev;
 	struct IO_APIC_route_entry entry[0];
 };
-static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
+static struct sysfs_ioapic_data *mp_ioapic_data[MAX_IO_APICS];
 
 static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
 {
 	struct IO_APIC_route_entry *entry;
 	struct sysfs_ioapic_data *data;
 	int i;
-	
+
 	data = container_of(dev, struct sysfs_ioapic_data, dev);
 	entry = data->entry;
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
 		entry[i] = ioapic_read_entry(dev->id, i);
 
 	return 0;
@@ -2341,18 +2378,18 @@ static int ioapic_resume(struct sys_device *dev)
 	unsigned long flags;
 	union IO_APIC_reg_00 reg_00;
 	int i;
-	
+
 	data = container_of(dev, struct sysfs_ioapic_data, dev);
 	entry = data->entry;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
+	if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
+		reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
 		io_apic_write(dev->id, 0, reg_00.raw);
 	}
 	spin_unlock_irqrestore(&ioapic_lock, flags);
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
 		ioapic_write_entry(dev->id, i, entry[i]);
 
 	return 0;
@@ -2366,24 +2403,23 @@ static struct sysdev_class ioapic_sysdev_class = {
 
 static int __init ioapic_init_sysfs(void)
 {
-	struct sys_device * dev;
+	struct sys_device *dev;
 	int i, size, error = 0;
 
 	error = sysdev_class_register(&ioapic_sysdev_class);
 	if (error)
 		return error;
 
-	for (i = 0; i < nr_ioapics; i++ ) {
-		size = sizeof(struct sys_device) + nr_ioapic_registers[i] 
+	for (i = 0; i < nr_ioapics; i++) {
+		size = sizeof(struct sys_device) + nr_ioapic_registers[i]
 			* sizeof(struct IO_APIC_route_entry);
-		mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
+		mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
 		if (!mp_ioapic_data[i]) {
 			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
 			continue;
 		}
-		memset(mp_ioapic_data[i], 0, size);
 		dev = &mp_ioapic_data[i]->dev;
-		dev->id = i; 
+		dev->id = i;
 		dev->cls = &ioapic_sysdev_class;
 		error = sysdev_register(dev);
 		if (error) {
@@ -2458,7 +2494,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		msg->address_lo =
 			MSI_ADDR_BASE_LO |
 			((INT_DEST_MODE == 0) ?
-				MSI_ADDR_DEST_MODE_PHYSICAL:
+MSI_ADDR_DEST_MODE_PHYSICAL:
 				MSI_ADDR_DEST_MODE_LOGICAL) |
 			((INT_DELIVERY_MODE != dest_LowestPrio) ?
 				MSI_ADDR_REDIRECTION_CPU:
@@ -2469,7 +2505,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 			MSI_DATA_TRIGGER_EDGE |
 			MSI_DATA_LEVEL_ASSERT |
 			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				MSI_DATA_DELIVERY_FIXED:
+MSI_DATA_DELIVERY_FIXED:
 				MSI_DATA_DELIVERY_LOWPRI) |
 			MSI_DATA_VECTOR(vector);
 	}
@@ -2640,12 +2676,12 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 #endif /* CONFIG_HT_IRQ */
 
 /* --------------------------------------------------------------------------
-                          ACPI-based IOAPIC Configuration
+			ACPI-based IOAPIC Configuration
    -------------------------------------------------------------------------- */
 
 #ifdef CONFIG_ACPI
 
-int __init io_apic_get_unique_id (int ioapic, int apic_id)
+int __init io_apic_get_unique_id(int ioapic, int apic_id)
 {
 	union IO_APIC_reg_00 reg_00;
 	static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
@@ -2654,10 +2690,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 	int i = 0;
 
 	/*
-	 * The P4 platform supports up to 256 APIC IDs on two separate APIC 
-	 * buses (one for LAPICs, one for IOAPICs), where predecessors only 
+	 * The P4 platform supports up to 256 APIC IDs on two separate APIC
+	 * buses (one for LAPICs, one for IOAPICs), where predecessors only
 	 * supports up to 16 on one shared APIC bus.
-	 * 
+	 *
 	 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
 	 *      advantage of new APIC bus architecture.
 	 */
@@ -2676,7 +2712,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 	}
 
 	/*
-	 * Every APIC in a system must have a unique ID or we get lots of nice 
+	 * Every APIC in a system must have a unique ID or we get lots of nice
 	 * 'stuck on smp_invalidate_needed IPI wait' messages.
 	 */
 	if (check_apicid_used(apic_id_map, apic_id)) {
@@ -2693,7 +2729,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 			"trying %d\n", ioapic, apic_id, i);
 
 		apic_id = i;
-	} 
+	}
 
 	tmp = apicid_to_cpu_present(apic_id);
 	physids_or(apic_id_map, apic_id_map, tmp);
@@ -2720,7 +2756,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 }
 
 
-int __init io_apic_get_version (int ioapic)
+int __init io_apic_get_version(int ioapic)
 {
 	union IO_APIC_reg_01	reg_01;
 	unsigned long flags;
@@ -2733,7 +2769,7 @@ int __init io_apic_get_version (int ioapic)
 }
 
 
-int __init io_apic_get_redir_entries (int ioapic)
+int __init io_apic_get_redir_entries(int ioapic)
 {
 	union IO_APIC_reg_01	reg_01;
 	unsigned long flags;
@@ -2746,7 +2782,7 @@ int __init io_apic_get_redir_entries (int ioapic)
 }
 
 
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
+int io_apic_set_pci_routing(int ioapic, int pin, int irq, int edge_level, int active_high_low)
 {
 	struct IO_APIC_route_entry entry;
 
@@ -2762,7 +2798,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	 * corresponding device driver registers for this IRQ.
 	 */
 
-	memset(&entry,0,sizeof(entry));
+	memset(&entry, 0, sizeof(entry));
 
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.dest_mode = INT_DEST_MODE;
@@ -2781,7 +2817,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 
 	apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
 		"(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic,
-		mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
+		mp_ioapics[ioapic].mp_apicid, pin, entry.vector, irq,
 		edge_level, active_high_low);
 
 	ioapic_register_intr(irq, entry.vector, edge_level);
@@ -2802,8 +2838,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 		return -1;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mpc_irqtype == mp_INT &&
-		    mp_irqs[i].mpc_srcbusirq == bus_irq)
+		if (mp_irqs[i].mp_irqtype == mp_INT &&
+		    mp_irqs[i].mp_srcbusirq == bus_irq)
 			break;
 	if (i >= mp_irq_entries)
 		return -1;
@@ -2836,3 +2872,34 @@ static int __init parse_noapic(char *arg)
 	return 0;
 }
 early_param("noapic", parse_noapic);
+
+void __init ioapic_init_mappings(void)
+{
+	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
+	int i;
+
+	for (i = 0; i < nr_ioapics; i++) {
+		if (smp_found_config) {
+			ioapic_phys = mp_ioapics[i].mp_apicaddr;
+			if (!ioapic_phys) {
+				printk(KERN_ERR
+				       "WARNING: bogus zero IO-APIC "
+				       "address found in MPTABLE, "
+				       "disabling IO/APIC support!\n");
+				smp_found_config = 0;
+				skip_ioapic_setup = 1;
+				goto fake_ioapic_page;
+			}
+		} else {
+fake_ioapic_page:
+			ioapic_phys = (unsigned long)
+				      alloc_bootmem_pages(PAGE_SIZE);
+			ioapic_phys = __pa(ioapic_phys);
+		}
+		set_fixmap_nocache(idx, ioapic_phys);
+		printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
+		       __fix_to_virt(idx), ioapic_phys);
+		idx++;
+	}
+}
+
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index ef1a8dfcc529..8269434d1707 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -45,6 +45,7 @@
 #include <asm/proto.h>
 #include <asm/acpi.h>
 #include <asm/dma.h>
+#include <asm/i8259.h>
 #include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
@@ -61,7 +62,7 @@ struct irq_cfg {
 };
 
 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
-struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
+static struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
 	[0]  = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR,  },
 	[1]  = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR,  },
 	[2]  = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR,  },
@@ -82,6 +83,10 @@ struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
 
 static int assign_irq_vector(int irq, cpumask_t mask);
 
+int first_system_vector = 0xfe;
+
+char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
+
 #define __apicdebuginit  __init
 
 int sis_apic_bug; /* not actually supported, dummy for compile */
@@ -90,7 +95,7 @@ static int no_timer_check;
 
 static int disable_timer_pin_1 __initdata;
 
-int timer_over_8254 __initdata = 1;
+int timer_through_8259 __initdata;
 
 /* Where if anywhere is the i8259 connect in external int mode */
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
@@ -104,15 +109,17 @@ DEFINE_SPINLOCK(vector_lock);
 int nr_ioapic_registers[MAX_IO_APICS];
 
 /* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
 /* MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
 /* # of MP IRQ source entries */
 int mp_irq_entries;
 
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
 /*
  * Rough estimation of how many shared IRQs there are, can
  * be changed anytime.
@@ -140,7 +147,7 @@ struct io_apic {
 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
 {
 	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+		+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
 }
 
 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
@@ -183,7 +190,7 @@ static bool io_apic_level_ack_pending(unsigned int irq)
 			break;
 		reg = io_apic_read(entry->apic, 0x10 + pin*2);
 		/* Is the remote IRR bit set? */
-		if ((reg >> 14) & 1) {
+		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
 			spin_unlock_irqrestore(&ioapic_lock, flags);
 			return true;
 		}
@@ -298,7 +305,7 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
 			break;
 		io_apic_write(apic, 0x11 + pin*2, dest);
 		reg = io_apic_read(apic, 0x10 + pin*2);
-		reg &= ~0x000000ff;
+		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
 		reg |= vector;
 		io_apic_modify(apic, reg);
 		if (!entry->next)
@@ -360,16 +367,37 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin)
 	entry->pin = pin;
 }
 
+/*
+ * Reroute an IRQ to a different pin.
+ */
+static void __init replace_pin_at_irq(unsigned int irq,
+				      int oldapic, int oldpin,
+				      int newapic, int newpin)
+{
+	struct irq_pin_list *entry = irq_2_pin + irq;
+
+	while (1) {
+		if (entry->apic == oldapic && entry->pin == oldpin) {
+			entry->apic = newapic;
+			entry->pin = newpin;
+		}
+		if (!entry->next)
+			break;
+		entry = irq_2_pin + entry->next;
+	}
+}
+
 
 #define DO_ACTION(name,R,ACTION, FINAL)					\
 									\
 	static void name##_IO_APIC_irq (unsigned int irq)		\
 	__DO_ACTION(R, ACTION, FINAL)
 
-DO_ACTION( __mask,             0, |= 0x00010000, io_apic_sync(entry->apic) )
-						/* mask = 1 */
-DO_ACTION( __unmask,           0, &= 0xfffeffff, )
-						/* mask = 0 */
+/* mask = 1 */
+DO_ACTION(__mask,	0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic))
+
+/* mask = 0 */
+DO_ACTION(__unmask,	0, &= ~IO_APIC_REDIR_MASKED, )
 
 static void mask_IO_APIC_irq (unsigned int irq)
 {
@@ -430,20 +458,6 @@ static int __init disable_timer_pin_setup(char *arg)
 }
 __setup("disable_timer_pin_1", disable_timer_pin_setup);
 
-static int __init setup_disable_8254_timer(char *s)
-{
-	timer_over_8254 = -1;
-	return 1;
-}
-static int __init setup_enable_8254_timer(char *s)
-{
-	timer_over_8254 = 2;
-	return 1;
-}
-
-__setup("disable_8254_timer", setup_disable_8254_timer);
-__setup("enable_8254_timer", setup_enable_8254_timer);
-
 
 /*
  * Find the IRQ entry number of a certain pin.
@@ -453,10 +467,10 @@ static int find_irq_entry(int apic, int pin, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mpc_irqtype == type &&
-		    (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
-		     mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mpc_dstirq == pin)
+		if (mp_irqs[i].mp_irqtype == type &&
+		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
+		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
+		    mp_irqs[i].mp_dstirq == pin)
 			return i;
 
 	return -1;
@@ -470,13 +484,13 @@ static int __init find_isa_irq_pin(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
 
-			return mp_irqs[i].mpc_dstirq;
+			return mp_irqs[i].mp_dstirq;
 	}
 	return -1;
 }
@@ -486,17 +500,17 @@ static int __init find_isa_irq_apic(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
 			break;
 	}
 	if (i < mp_irq_entries) {
 		int apic;
 		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
 				return apic;
 		}
 	}
@@ -516,28 +530,28 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 
 	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
 		bus, slot, pin);
-	if (mp_bus_id_to_pci_bus[bus] == -1) {
+	if (test_bit(bus, mp_bus_not_pci)) {
 		apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
 		return -1;
 	}
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
-			    mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
+			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
 				break;
 
 		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mpc_irqtype &&
+		    !mp_irqs[i].mp_irqtype &&
 		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
+		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
 
 			if (!(apic || IO_APIC_IRQ(irq)))
 				continue;
 
-			if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
+			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
 				return irq;
 			/*
 			 * Use the first all-but-pin matching entry as a
@@ -565,13 +579,13 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 
 static int MPBIOS_polarity(int idx)
 {
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 	int polarity;
 
 	/*
 	 * Determine IRQ line polarity (high active or low active):
 	 */
-	switch (mp_irqs[idx].mpc_irqflag & 3)
+	switch (mp_irqs[idx].mp_irqflag & 3)
 	{
 		case 0: /* conforms, ie. bus-type dependent polarity */
 			if (test_bit(bus, mp_bus_not_pci))
@@ -607,13 +621,13 @@ static int MPBIOS_polarity(int idx)
 
 static int MPBIOS_trigger(int idx)
 {
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 	int trigger;
 
 	/*
 	 * Determine IRQ trigger mode (edge or level sensitive):
 	 */
-	switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
+	switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
 	{
 		case 0: /* conforms, ie. bus-type dependent */
 			if (test_bit(bus, mp_bus_not_pci))
@@ -660,16 +674,16 @@ static inline int irq_trigger(int idx)
 static int pin_2_irq(int idx, int apic, int pin)
 {
 	int irq, i;
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 
 	/*
 	 * Debugging check, we are in big trouble if this message pops up!
 	 */
-	if (mp_irqs[idx].mpc_dstirq != pin)
+	if (mp_irqs[idx].mp_dstirq != pin)
 		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
 
 	if (test_bit(bus, mp_bus_not_pci)) {
-		irq = mp_irqs[idx].mpc_srcbusirq;
+		irq = mp_irqs[idx].mp_srcbusirq;
 	} else {
 		/*
 		 * PCI IRQs are mapped in order
@@ -718,7 +732,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask)
 			return 0;
 	}
 
-	for_each_cpu_mask(cpu, mask) {
+	for_each_cpu_mask_nr(cpu, mask) {
 		cpumask_t domain, new_mask;
 		int new_cpu;
 		int vector, offset;
@@ -730,7 +744,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask)
 		offset = current_offset;
 next:
 		vector += 8;
-		if (vector >= FIRST_SYSTEM_VECTOR) {
+		if (vector >= first_system_vector) {
 			/* If we run out of vectors on large boxen, must share them. */
 			offset = (offset + 1) % 8;
 			vector = FIRST_DEVICE_VECTOR + offset;
@@ -739,7 +753,7 @@ next:
 			continue;
 		if (vector == IA32_SYSCALL_VECTOR)
 			goto next;
-		for_each_cpu_mask(new_cpu, new_mask)
+		for_each_cpu_mask_nr(new_cpu, new_mask)
 			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
 				goto next;
 		/* Found one! */
@@ -749,7 +763,7 @@ next:
 			cfg->move_in_progress = 1;
 			cfg->old_domain = cfg->domain;
 		}
-		for_each_cpu_mask(new_cpu, new_mask)
+		for_each_cpu_mask_nr(new_cpu, new_mask)
 			per_cpu(vector_irq, new_cpu)[vector] = irq;
 		cfg->vector = vector;
 		cfg->domain = domain;
@@ -781,14 +795,14 @@ static void __clear_irq_vector(int irq)
 
 	vector = cfg->vector;
 	cpus_and(mask, cfg->domain, cpu_online_map);
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu_mask_nr(cpu, mask)
 		per_cpu(vector_irq, cpu)[vector] = -1;
 
 	cfg->vector = 0;
 	cpus_clear(cfg->domain);
 }
 
-void __setup_vector_irq(int cpu)
+static void __setup_vector_irq(int cpu)
 {
 	/* Initialize vector_irq on a new cpu */
 	/* This function must be called with vector_lock held */
@@ -811,6 +825,13 @@ void __setup_vector_irq(int cpu)
 	}
 }
 
+void setup_vector_irq(int cpu)
+{
+	spin_lock(&vector_lock);
+	__setup_vector_irq(smp_processor_id());
+	spin_unlock(&vector_lock);
+}
+
 
 static struct irq_chip ioapic_chip;
 
@@ -846,7 +867,7 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
 	apic_printk(APIC_VERBOSE,KERN_DEBUG
 		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
 		    "IRQ %d Mode:%i Active:%i)\n",
-		    apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector,
+		    apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
 		    irq, trigger, polarity);
 
 	/*
@@ -887,10 +908,10 @@ static void __init setup_IO_APIC_irqs(void)
 		idx = find_irq_entry(apic,pin,mp_INT);
 		if (idx == -1) {
 			if (first_notcon) {
-				apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
+				apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin);
 				first_notcon = 0;
 			} else
-				apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
+				apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin);
 			continue;
 		}
 		if (!first_notcon) {
@@ -911,26 +932,21 @@ static void __init setup_IO_APIC_irqs(void)
 }
 
 /*
- * Set up the 8259A-master output pin as broadcast to all
- * CPUs.
+ * Set up the timer pin, possibly with the 8259A-master behind.
  */
-static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
+static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
+					int vector)
 {
 	struct IO_APIC_route_entry entry;
 
 	memset(&entry, 0, sizeof(entry));
 
-	disable_8259A_irq(0);
-
-	/* mask LVT0 */
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-
 	/*
 	 * We use logical delivery to get the timer IRQ
 	 * to the first CPU.
 	 */
 	entry.dest_mode = INT_DEST_MODE;
-	entry.mask = 0;					/* unmask IRQ now */
+	entry.mask = 1;					/* mask IRQ now */
 	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.polarity = 0;
@@ -939,7 +955,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in
 
 	/*
 	 * The timer IRQ doesn't have to know that behind the
-	 * scene we have a 8259A-master in AEOI mode ...
+	 * scene we may have a 8259A-master in AEOI mode ...
 	 */
 	set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
 
@@ -947,8 +963,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in
 	 * Add it to the IO-APIC irq-routing table:
 	 */
 	ioapic_write_entry(apic, pin, entry);
-
-	enable_8259A_irq(0);
 }
 
 void __apicdebuginit print_IO_APIC(void)
@@ -965,7 +979,7 @@ void __apicdebuginit print_IO_APIC(void)
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+		       mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
 
 	/*
 	 * We are a bit conservative about what we expect.  We have to
@@ -983,7 +997,7 @@ void __apicdebuginit print_IO_APIC(void)
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	printk("\n");
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
+	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
 	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
 	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
 
@@ -1077,6 +1091,7 @@ void __apicdebuginit print_local_APIC(void * dummy)
 
 	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
+	v = apic_read(APIC_ID);
 	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
 	v = apic_read(APIC_LVR);
 	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
@@ -1146,7 +1161,7 @@ void __apicdebuginit print_local_APIC(void * dummy)
 
 void print_all_local_APICs (void)
 {
-	on_each_cpu(print_local_APIC, NULL, 1, 1);
+	on_each_cpu(print_local_APIC, NULL, 1);
 }
 
 void __apicdebuginit print_PIC(void)
@@ -1358,12 +1373,10 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 static int ioapic_retrigger_irq(unsigned int irq)
 {
 	struct irq_cfg *cfg = &irq_cfg[irq];
-	cpumask_t mask;
 	unsigned long flags;
 
 	spin_lock_irqsave(&vector_lock, flags);
-	mask = cpumask_of_cpu(first_cpu(cfg->domain));
-	send_IPI_mask(mask, cfg->vector);
+	send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
 	spin_unlock_irqrestore(&vector_lock, flags);
 
 	return 1;
@@ -1540,7 +1553,7 @@ static inline void init_IO_APIC_traps(void)
 	}
 }
 
-static void enable_lapic_irq (unsigned int irq)
+static void unmask_lapic_irq(unsigned int irq)
 {
 	unsigned long v;
 
@@ -1548,7 +1561,7 @@ static void enable_lapic_irq (unsigned int irq)
 	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
 }
 
-static void disable_lapic_irq (unsigned int irq)
+static void mask_lapic_irq(unsigned int irq)
 {
 	unsigned long v;
 
@@ -1561,19 +1574,20 @@ static void ack_lapic_irq (unsigned int irq)
 	ack_APIC_irq();
 }
 
-static void end_lapic_irq (unsigned int i) { /* nothing */ }
-
-static struct hw_interrupt_type lapic_irq_type __read_mostly = {
-	.name = "local-APIC",
-	.typename = "local-APIC-edge",
-	.startup = NULL, /* startup_irq() not used for IRQ0 */
-	.shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
-	.enable = enable_lapic_irq,
-	.disable = disable_lapic_irq,
-	.ack = ack_lapic_irq,
-	.end = end_lapic_irq,
+static struct irq_chip lapic_chip __read_mostly = {
+	.name		= "local-APIC",
+	.mask		= mask_lapic_irq,
+	.unmask		= unmask_lapic_irq,
+	.ack		= ack_lapic_irq,
 };
 
+static void lapic_register_intr(int irq)
+{
+	irq_desc[irq].status &= ~IRQ_LEVEL;
+	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
+				      "edge");
+}
+
 static void __init setup_nmi(void)
 {
 	/*
@@ -1659,6 +1673,7 @@ static inline void __init check_timer(void)
 	struct irq_cfg *cfg = irq_cfg + 0;
 	int apic1, pin1, apic2, pin2;
 	unsigned long flags;
+	int no_pin1 = 0;
 
 	local_irq_save(flags);
 
@@ -1669,34 +1684,48 @@ static inline void __init check_timer(void)
 	assign_irq_vector(0, TARGET_CPUS);
 
 	/*
-	 * Subtle, code in do_timer_interrupt() expects an AEOI
-	 * mode for the 8259A whenever interrupts are routed
-	 * through I/O APICs.  Also IRQ0 has to be enabled in
-	 * the 8259A which implies the virtual wire has to be
-	 * disabled in the local APIC.
+	 * As IRQ0 is to be enabled in the 8259A, the virtual
+	 * wire has to be disabled in the local APIC.
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
-	if (timer_over_8254 > 0)
-		enable_8259A_irq(0);
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		cfg->vector, apic1, pin1, apic2, pin2);
+	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		    cfg->vector, apic1, pin1, apic2, pin2);
+
+	/*
+	 * Some BIOS writers are clueless and report the ExtINTA
+	 * I/O APIC input from the cascaded 8259A as the timer
+	 * interrupt input.  So just in case, if only one pin
+	 * was found above, try it both directly and through the
+	 * 8259A.
+	 */
+	if (pin1 == -1) {
+		pin1 = pin2;
+		apic1 = apic2;
+		no_pin1 = 1;
+	} else if (pin2 == -1) {
+		pin2 = pin1;
+		apic2 = apic1;
+	}
 
 	if (pin1 != -1) {
 		/*
 		 * Ok, does IRQ0 through the IOAPIC work?
 		 */
+		if (no_pin1) {
+			add_pin_to_irq(0, apic1, pin1);
+			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
+		}
 		unmask_IO_APIC_irq(0);
 		if (!no_timer_check && timer_irq_works()) {
-			nmi_watchdog_default();
 			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
 				setup_nmi();
 				enable_8259A_irq(0);
 			}
@@ -1705,54 +1734,62 @@ static inline void __init check_timer(void)
 			goto out;
 		}
 		clear_IO_APIC_pin(apic1, pin1);
-		apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
-				"connected to IO-APIC\n");
-	}
-
-	apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
-				"through the 8259A ... ");
-	if (pin2 != -1) {
-		apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
-			apic2, pin2);
+		if (!no_pin1)
+			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
+				    "8254 timer not connected to IO-APIC\n");
+
+		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+			    "(IRQ0) through the 8259A ...\n");
+		apic_printk(APIC_QUIET, KERN_INFO
+			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector);
+		replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
+		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
+		unmask_IO_APIC_irq(0);
+		enable_8259A_irq(0);
 		if (timer_irq_works()) {
-			apic_printk(APIC_VERBOSE," works.\n");
-			nmi_watchdog_default();
+			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
+			timer_through_8259 = 1;
 			if (nmi_watchdog == NMI_IO_APIC) {
+				disable_8259A_irq(0);
 				setup_nmi();
+				enable_8259A_irq(0);
 			}
 			goto out;
 		}
 		/*
 		 * Cleanup, just in case ...
 		 */
+		disable_8259A_irq(0);
 		clear_IO_APIC_pin(apic2, pin2);
+		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
-	apic_printk(APIC_VERBOSE," failed.\n");
 
 	if (nmi_watchdog == NMI_IO_APIC) {
-		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = 0;
+		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+			    "through the IO-APIC - disabling NMI Watchdog!\n");
+		nmi_watchdog = NMI_NONE;
 	}
 
-	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as Virtual Wire IRQ...\n");
 
-	disable_8259A_irq(0);
-	irq_desc[0].chip = &lapic_irq_type;
+	lapic_register_intr(0);
 	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
 	enable_8259A_irq(0);
 
 	if (timer_irq_works()) {
-		apic_printk(APIC_VERBOSE," works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
+	disable_8259A_irq(0);
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
-	apic_printk(APIC_VERBOSE," failed.\n");
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
 
-	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as ExtINT IRQ...\n");
 
 	init_8259A(0);
 	make_8259A_irq(0);
@@ -1761,11 +1798,12 @@ static inline void __init check_timer(void)
 	unlock_ExtINT_logic();
 
 	if (timer_irq_works()) {
-		apic_printk(APIC_VERBOSE," works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
-	apic_printk(APIC_VERBOSE," failed :(.\n");
-	panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
+	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
+		"report.  Then try booting with the 'noapic' option.\n");
 out:
 	local_irq_restore(flags);
 }
@@ -1778,11 +1816,21 @@ static int __init notimercheck(char *s)
 __setup("no_timer_check", notimercheck);
 
 /*
- *
- * IRQs that are handled by the PIC in the MPS IOAPIC case.
- * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
- *   Linux doesn't really care, as it's not actually used
- *   for any interrupt handling anyway.
+ * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
+ * to devices.  However there may be an I/O APIC pin available for
+ * this interrupt regardless.  The pin may be left unconnected, but
+ * typically it will be reused as an ExtINT cascade interrupt for
+ * the master 8259A.  In the MPS case such a pin will normally be
+ * reported as an ExtINT interrupt in the MP table.  With ACPI
+ * there is no provision for ExtINT interrupts, and in the absence
+ * of an override it would be treated as an ordinary ISA I/O APIC
+ * interrupt, that is edge-triggered and unmasked by default.  We
+ * used to do this, but it caused problems on some systems because
+ * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
+ * the same ExtINT cascade interrupt to drive the local APIC of the
+ * bootstrap processor.  Therefore we refrain from routing IRQ2 to
+ * the I/O APIC in all cases now.  No actual device should request
+ * it anyway.  --macro
  */
 #define PIC_IRQS	(1<<2)
 
@@ -1793,10 +1841,7 @@ void __init setup_IO_APIC(void)
 	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
 	 */
 
-	if (acpi_ioapic)
-		io_apic_irqs = ~0;	/* all IRQs go through IOAPIC */
-	else
-		io_apic_irqs = ~PIC_IRQS;
+	io_apic_irqs = ~PIC_IRQS;
 
 	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
 
@@ -1841,8 +1886,8 @@ static int ioapic_resume(struct sys_device *dev)
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
+	if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
+		reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
 		io_apic_write(dev->id, 0, reg_00.raw);
 	}
 	spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -2242,8 +2287,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 		return -1;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mpc_irqtype == mp_INT &&
-		    mp_irqs[i].mpc_srcbusirq == bus_irq)
+		if (mp_irqs[i].mp_irqtype == mp_INT &&
+		    mp_irqs[i].mp_srcbusirq == bus_irq)
 			break;
 	if (i >= mp_irq_entries)
 		return -1;
@@ -2336,7 +2381,7 @@ void __init ioapic_init_mappings(void)
 	ioapic_res = ioapic_setup_resources();
 	for (i = 0; i < nr_ioapics; i++) {
 		if (smp_found_config) {
-			ioapic_phys = mp_ioapics[i].mpc_apicaddr;
+			ioapic_phys = mp_ioapics[i].mp_apicaddr;
 		} else {
 			ioapic_phys = (unsigned long)
 				alloc_bootmem_pages(PAGE_SIZE);
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index 5921e5f0a640..1c3a66a67f83 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -103,6 +103,9 @@ void __init io_delay_init(void)
 
 static int __init io_delay_param(char *s)
 {
+	if (!s)
+		return -EINVAL;
+
 	if (!strcmp(s, "0x80"))
 		io_delay_type = CONFIG_IO_DELAY_TYPE_0X80;
 	else if (!strcmp(s, "0xed"))
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index c0df7b89ca23..3f7537b669d3 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -8,7 +8,6 @@
 #include <linux/kernel_stat.h>
 #include <linux/mc146818rtc.h>
 #include <linux/cache.h>
-#include <linux/interrupt.h>
 #include <linux/cpu.h>
 #include <linux/module.h>
 
@@ -71,7 +70,7 @@ void __send_IPI_shortcut(unsigned int shortcut, int vector)
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write_around(APIC_ICR, cfg);
+	apic_write(APIC_ICR, cfg);
 }
 
 void send_IPI_self(int vector)
@@ -99,7 +98,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector)
 	 * prepare target chip field
 	 */
 	cfg = __prepare_ICR2(mask);
-	apic_write_around(APIC_ICR2, cfg);
+	apic_write(APIC_ICR2, cfg);
 
 	/*
 	 * program the ICR
@@ -109,7 +108,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector)
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write_around(APIC_ICR, cfg);
+	apic_write(APIC_ICR, cfg);
 }
 
 /*
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 147352df28b9..1cf8c1fcc088 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -48,6 +48,29 @@ void ack_bad_irq(unsigned int irq)
 #endif
 }
 
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+/* Debugging check for stack overflow: is there less than 1KB free? */
+static int check_stack_overflow(void)
+{
+	long sp;
+
+	__asm__ __volatile__("andl %%esp,%0" :
+			     "=r" (sp) : "0" (THREAD_SIZE - 1));
+
+	return sp < (sizeof(struct thread_info) + STACK_WARN);
+}
+
+static void print_stack_overflow(void)
+{
+	printk(KERN_WARNING "low stack detected by irq handler\n");
+	dump_stack();
+}
+
+#else
+static inline int check_stack_overflow(void) { return 0; }
+static inline void print_stack_overflow(void) { }
+#endif
+
 #ifdef CONFIG_4KSTACKS
 /*
  * per-CPU IRQ handling contexts (thread information and stack)
@@ -59,48 +82,26 @@ union irq_ctx {
 
 static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
-#endif
-
-/*
- * do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- */
-unsigned int do_IRQ(struct pt_regs *regs)
-{	
-	struct pt_regs *old_regs;
-	/* high bit used in ret_from_ code */
-	int irq = ~regs->orig_ax;
-	struct irq_desc *desc = irq_desc + irq;
-#ifdef CONFIG_4KSTACKS
-	union irq_ctx *curctx, *irqctx;
-	u32 *isp;
-#endif
 
-	if (unlikely((unsigned)irq >= NR_IRQS)) {
-		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
-					__func__, irq);
-		BUG();
-	}
+static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
+static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
 
-	old_regs = set_irq_regs(regs);
-	irq_enter();
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
-	/* Debugging check for stack overflow: is there less than 1KB free? */
-	{
-		long sp;
-
-		__asm__ __volatile__("andl %%esp,%0" :
-					"=r" (sp) : "0" (THREAD_SIZE - 1));
-		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
-			printk("do_IRQ: stack overflow: %ld\n",
-				sp - sizeof(struct thread_info));
-			dump_stack();
-		}
-	}
-#endif
+static void call_on_stack(void *func, void *stack)
+{
+	asm volatile("xchgl	%%ebx,%%esp	\n"
+		     "call	*%%edi		\n"
+		     "movl	%%ebx,%%esp	\n"
+		     : "=b" (stack)
+		     : "0" (stack),
+		       "D"(func)
+		     : "memory", "cc", "edx", "ecx", "eax");
+}
 
-#ifdef CONFIG_4KSTACKS
+static inline int
+execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq)
+{
+	union irq_ctx *curctx, *irqctx;
+	u32 *isp, arg1, arg2;
 
 	curctx = (union irq_ctx *) current_thread_info();
 	irqctx = hardirq_ctx[smp_processor_id()];
@@ -111,52 +112,39 @@ unsigned int do_IRQ(struct pt_regs *regs)
 	 * handler) we can't do that and just have to keep using the
 	 * current stack (which is the irq stack already after all)
 	 */
-	if (curctx != irqctx) {
-		int arg1, arg2, bx;
-
-		/* build the stack frame on the IRQ stack */
-		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
-		irqctx->tinfo.task = curctx->tinfo.task;
-		irqctx->tinfo.previous_esp = current_stack_pointer;
+	if (unlikely(curctx == irqctx))
+		return 0;
 
-		/*
-		 * Copy the softirq bits in preempt_count so that the
-		 * softirq checks work in the hardirq context.
-		 */
-		irqctx->tinfo.preempt_count =
-			(irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
-			(curctx->tinfo.preempt_count & SOFTIRQ_MASK);
-
-		asm volatile(
-			"       xchgl  %%ebx,%%esp    \n"
-			"       call   *%%edi         \n"
-			"       movl   %%ebx,%%esp    \n"
-			: "=a" (arg1), "=d" (arg2), "=b" (bx)
-			:  "0" (irq),   "1" (desc),  "2" (isp),
-			   "D" (desc->handle_irq)
-			: "memory", "cc", "ecx"
-		);
-	} else
-#endif
-		desc->handle_irq(irq, desc);
+	/* build the stack frame on the IRQ stack */
+	isp = (u32 *) ((char*)irqctx + sizeof(*irqctx));
+	irqctx->tinfo.task = curctx->tinfo.task;
+	irqctx->tinfo.previous_esp = current_stack_pointer;
 
-	irq_exit();
-	set_irq_regs(old_regs);
+	/*
+	 * Copy the softirq bits in preempt_count so that the
+	 * softirq checks work in the hardirq context.
+	 */
+	irqctx->tinfo.preempt_count =
+		(irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
+		(curctx->tinfo.preempt_count & SOFTIRQ_MASK);
+
+	if (unlikely(overflow))
+		call_on_stack(print_stack_overflow, isp);
+
+	asm volatile("xchgl	%%ebx,%%esp	\n"
+		     "call	*%%edi		\n"
+		     "movl	%%ebx,%%esp	\n"
+		     : "=a" (arg1), "=d" (arg2), "=b" (isp)
+		     :  "0" (irq),   "1" (desc),  "2" (isp),
+			"D" (desc->handle_irq)
+		     : "memory", "cc", "ecx");
 	return 1;
 }
 
-#ifdef CONFIG_4KSTACKS
-
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
-
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
-
 /*
  * allocate per-cpu stacks for hardirq and for softirq processing
  */
-void irq_ctx_init(int cpu)
+void __cpuinit irq_ctx_init(int cpu)
 {
 	union irq_ctx *irqctx;
 
@@ -164,25 +152,25 @@ void irq_ctx_init(int cpu)
 		return;
 
 	irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
-	irqctx->tinfo.task              = NULL;
-	irqctx->tinfo.exec_domain       = NULL;
-	irqctx->tinfo.cpu               = cpu;
-	irqctx->tinfo.preempt_count     = HARDIRQ_OFFSET;
-	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
+	irqctx->tinfo.task		= NULL;
+	irqctx->tinfo.exec_domain	= NULL;
+	irqctx->tinfo.cpu		= cpu;
+	irqctx->tinfo.preempt_count	= HARDIRQ_OFFSET;
+	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
 
 	hardirq_ctx[cpu] = irqctx;
 
 	irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE];
-	irqctx->tinfo.task              = NULL;
-	irqctx->tinfo.exec_domain       = NULL;
-	irqctx->tinfo.cpu               = cpu;
-	irqctx->tinfo.preempt_count     = 0;
-	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
+	irqctx->tinfo.task		= NULL;
+	irqctx->tinfo.exec_domain	= NULL;
+	irqctx->tinfo.cpu		= cpu;
+	irqctx->tinfo.preempt_count	= 0;
+	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
 
 	softirq_ctx[cpu] = irqctx;
 
-	printk("CPU %u irqstacks, hard=%p soft=%p\n",
-		cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
+	printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n",
+	       cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
 }
 
 void irq_ctx_exit(int cpu)
@@ -211,25 +199,56 @@ asmlinkage void do_softirq(void)
 		/* build the stack frame on the softirq stack */
 		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
 
-		asm volatile(
-			"       xchgl   %%ebx,%%esp     \n"
-			"       call    __do_softirq    \n"
-			"       movl    %%ebx,%%esp     \n"
-			: "=b"(isp)
-			: "0"(isp)
-			: "memory", "cc", "edx", "ecx", "eax"
-		);
+		call_on_stack(__do_softirq, isp);
 		/*
 		 * Shouldnt happen, we returned above if in_interrupt():
-	 	 */
+		 */
 		WARN_ON_ONCE(softirq_count());
 	}
 
 	local_irq_restore(flags);
 }
+
+#else
+static inline int
+execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; }
 #endif
 
 /*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+unsigned int do_IRQ(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+	/* high bit used in ret_from_ code */
+	int overflow, irq = ~regs->orig_ax;
+	struct irq_desc *desc = irq_desc + irq;
+
+	if (unlikely((unsigned)irq >= NR_IRQS)) {
+		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
+					__func__, irq);
+		BUG();
+	}
+
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+
+	overflow = check_stack_overflow();
+
+	if (!execute_on_irq_stack(overflow, desc, irq)) {
+		if (unlikely(overflow))
+			print_stack_overflow();
+		desc->handle_irq(irq, desc);
+	}
+
+	irq_exit();
+	set_irq_regs(old_regs);
+	return 1;
+}
+
+/*
  * Interrupt statistics:
  */
 
@@ -313,16 +332,20 @@ skip:
 				per_cpu(irq_stat,j).irq_tlb_count);
 		seq_printf(p, "  TLB shootdowns\n");
 #endif
+#ifdef CONFIG_X86_MCE
 		seq_printf(p, "TRM: ");
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ",
 				per_cpu(irq_stat,j).irq_thermal_count);
 		seq_printf(p, "  Thermal event interrupts\n");
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
 		seq_printf(p, "SPU: ");
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ",
 				per_cpu(irq_stat,j).irq_spurious_count);
 		seq_printf(p, "  Spurious interrupts\n");
+#endif
 		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
 #if defined(CONFIG_X86_IO_APIC)
 		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
@@ -331,6 +354,40 @@ skip:
 	return 0;
 }
 
+/*
+ * /proc/stat helpers
+ */
+u64 arch_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = nmi_count(cpu);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	sum += per_cpu(irq_stat, cpu).apic_timer_irqs;
+#endif
+#ifdef CONFIG_SMP
+	sum += per_cpu(irq_stat, cpu).irq_resched_count;
+	sum += per_cpu(irq_stat, cpu).irq_call_count;
+	sum += per_cpu(irq_stat, cpu).irq_tlb_count;
+#endif
+#ifdef CONFIG_X86_MCE
+	sum += per_cpu(irq_stat, cpu).irq_thermal_count;
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+	sum += per_cpu(irq_stat, cpu).irq_spurious_count;
+#endif
+	return sum;
+}
+
+u64 arch_irq_stat(void)
+{
+	u64 sum = atomic_read(&irq_err_count);
+
+#ifdef CONFIG_X86_IO_APIC
+	sum += atomic_read(&irq_mis_count);
+#endif
+	return sum;
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 #include <mach_apic.h>
 
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 3aac15466a91..1f78b238d8d2 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -135,6 +135,7 @@ skip:
 			seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count);
 		seq_printf(p, "  TLB shootdowns\n");
 #endif
+#ifdef CONFIG_X86_MCE
 		seq_printf(p, "TRM: ");
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count);
@@ -143,6 +144,7 @@ skip:
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count);
 		seq_printf(p, "  Threshold APIC interrupts\n");
+#endif
 		seq_printf(p, "SPU: ");
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count);
@@ -153,6 +155,32 @@ skip:
 }
 
 /*
+ * /proc/stat helpers
+ */
+u64 arch_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = cpu_pda(cpu)->__nmi_count;
+
+	sum += cpu_pda(cpu)->apic_timer_irqs;
+#ifdef CONFIG_SMP
+	sum += cpu_pda(cpu)->irq_resched_count;
+	sum += cpu_pda(cpu)->irq_call_count;
+	sum += cpu_pda(cpu)->irq_tlb_count;
+#endif
+#ifdef CONFIG_X86_MCE
+	sum += cpu_pda(cpu)->irq_thermal_count;
+	sum += cpu_pda(cpu)->irq_threshold_count;
+#endif
+	sum += cpu_pda(cpu)->irq_spurious_count;
+	return sum;
+}
+
+u64 arch_irq_stat(void)
+{
+	return atomic_read(&irq_err_count);
+}
+
+/*
  * do_IRQ handles all normal device IRQ's (the special
  * SMP cross-CPU interrupts have their own specific
  * handlers).
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
new file mode 100644
index 000000000000..d66914287ee1
--- /dev/null
+++ b/arch/x86/kernel/irqinit_32.c
@@ -0,0 +1,114 @@
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/timer.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/i8259.h>
+
+
+
+/*
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+ 
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id)
+{
+	extern void math_error(void __user *);
+	outb(0,0xF0);
+	if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+		return IRQ_NONE;
+	math_error((void __user *)get_irq_regs()->ip);
+	return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
+ */
+static struct irqaction fpu_irq = {
+	.handler = math_error_irq,
+	.mask = CPU_MASK_NONE,
+	.name = "fpu",
+};
+
+void __init init_ISA_irqs (void)
+{
+	int i;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	init_bsp_APIC();
+#endif
+	init_8259A(0);
+
+	/*
+	 * 16 old-style INTA-cycle interrupts:
+	 */
+	for (i = 0; i < 16; i++) {
+		set_irq_chip_and_handler_name(i, &i8259A_chip,
+					      handle_level_irq, "XT");
+	}
+}
+
+/* Overridden in paravirt.c */
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+void __init native_init_IRQ(void)
+{
+	int i;
+
+	/* all the set up before the call gates are initialised */
+	pre_intr_init_hook();
+
+	/*
+	 * Cover the whole vector space, no vector can escape
+	 * us. (some of these will be overridden and become
+	 * 'special' SMP interrupts)
+	 */
+	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+		int vector = FIRST_EXTERNAL_VECTOR + i;
+		if (i >= NR_IRQS)
+			break;
+		/* SYSCALL_VECTOR was reserved in trap_init. */
+		if (!test_bit(vector, used_vectors))
+			set_intr_gate(vector, interrupt[i]);
+	}
+
+	/* setup after call gates are initialised (usually add in
+	 * the architecture specific gates)
+	 */
+	intr_init_hook();
+
+	/*
+	 * External FPU? Set up irq13 if so, for
+	 * original braindamaged IBM FERR coupling.
+	 */
+	if (boot_cpu_data.hard_math && !cpu_has_fpu)
+		setup_irq(FPU_IRQ, &fpu_irq);
+
+	irq_ctx_init(smp_processor_id());
+}
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
new file mode 100644
index 000000000000..1f26fd9ec4f4
--- /dev/null
+++ b/arch/x86/kernel/irqinit_64.c
@@ -0,0 +1,222 @@
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/acpi.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/hw_irq.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+
+/*
+ * Common place to define all x86 IRQ vectors
+ *
+ * This builds up the IRQ handler stubs using some ugly macros in irq.h
+ *
+ * These macros create the low-level assembly IRQ routines that save
+ * register context and call do_IRQ(). do_IRQ() then does all the
+ * operations that are needed to keep the AT (or SMP IOAPIC)
+ * interrupt-controller happy.
+ */
+
+#define IRQ_NAME2(nr) nr##_interrupt(void)
+#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
+
+/*
+ *	SMP has a few special interrupts for IPI messages
+ */
+
+#define BUILD_IRQ(nr)				\
+	asmlinkage void IRQ_NAME(nr);		\
+	asm("\n.text\n.p2align\n"		\
+	    "IRQ" #nr "_interrupt:\n\t"		\
+	    "push $~(" #nr ") ; "		\
+	    "jmp common_interrupt\n"		\
+	    ".previous");
+
+#define BI(x,y) \
+	BUILD_IRQ(x##y)
+
+#define BUILD_16_IRQS(x) \
+	BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
+	BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
+	BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
+	BI(x,c) BI(x,d) BI(x,e) BI(x,f)
+
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+				      BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
+BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
+BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
+BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
+
+#undef BUILD_16_IRQS
+#undef BI
+
+
+#define IRQ(x,y) \
+	IRQ##x##y##_interrupt
+
+#define IRQLIST_16(x) \
+	IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
+	IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
+	IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
+	IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
+
+/* for the irq vectors */
+static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
+					  IRQLIST_16(0x2), IRQLIST_16(0x3),
+	IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
+	IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
+	IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
+};
+
+#undef IRQ
+#undef IRQLIST_16
+
+
+
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+
+static struct irqaction irq2 = {
+	.handler = no_action,
+	.mask = CPU_MASK_NONE,
+	.name = "cascade",
+};
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+	[0 ... IRQ0_VECTOR - 1] = -1,
+	[IRQ0_VECTOR] = 0,
+	[IRQ1_VECTOR] = 1,
+	[IRQ2_VECTOR] = 2,
+	[IRQ3_VECTOR] = 3,
+	[IRQ4_VECTOR] = 4,
+	[IRQ5_VECTOR] = 5,
+	[IRQ6_VECTOR] = 6,
+	[IRQ7_VECTOR] = 7,
+	[IRQ8_VECTOR] = 8,
+	[IRQ9_VECTOR] = 9,
+	[IRQ10_VECTOR] = 10,
+	[IRQ11_VECTOR] = 11,
+	[IRQ12_VECTOR] = 12,
+	[IRQ13_VECTOR] = 13,
+	[IRQ14_VECTOR] = 14,
+	[IRQ15_VECTOR] = 15,
+	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
+};
+
+static void __init init_ISA_irqs (void)
+{
+	int i;
+
+	init_bsp_APIC();
+	init_8259A(0);
+
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 1;
+
+		if (i < 16) {
+			/*
+			 * 16 old-style INTA-cycle interrupts:
+			 */
+			set_irq_chip_and_handler_name(i, &i8259A_chip,
+						      handle_level_irq, "XT");
+		} else {
+			/*
+			 * 'high' PCI IRQs filled in on demand
+			 */
+			irq_desc[i].chip = &no_irq_chip;
+		}
+	}
+}
+
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+void __init native_init_IRQ(void)
+{
+	int i;
+
+	init_ISA_irqs();
+	/*
+	 * Cover the whole vector space, no vector can escape
+	 * us. (some of these will be overridden and become
+	 * 'special' SMP interrupts)
+	 */
+	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+		int vector = FIRST_EXTERNAL_VECTOR + i;
+		if (vector != IA32_SYSCALL_VECTOR)
+			set_intr_gate(vector, interrupt[i]);
+	}
+
+#ifdef CONFIG_SMP
+	/*
+	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+	 * IPI, driven by wakeup.
+	 */
+	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+	/* IPIs for invalidation */
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
+
+	/* IPI for generic function call */
+	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+	/* IPI for generic single function call */
+	alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
+			call_function_single_interrupt);
+
+	/* Low priority IPI to cleanup after moving an irq */
+	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+#endif
+	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+
+	/* self generated IPI for local APIC timer */
+	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+	/* IPI vectors for APIC spurious and error interrupts */
+	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
+}
diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index c03205991718..f2d43bc75514 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -12,9 +12,13 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 
+struct dentry *arch_debugfs_dir;
+EXPORT_SYMBOL(arch_debugfs_dir);
+
 #ifdef CONFIG_DEBUG_BOOT_PARAMS
 struct setup_data_node {
 	u64 paddr;
@@ -209,6 +213,10 @@ static int __init arch_kdebugfs_init(void)
 {
 	int error = 0;
 
+	arch_debugfs_dir = debugfs_create_dir("x86", NULL);
+	if (!arch_debugfs_dir)
+		return -ENOMEM;
+
 #ifdef CONFIG_DEBUG_BOOT_PARAMS
 	error = boot_params_kdebugfs_init();
 #endif
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index b8c6743a13da..6c27679ec6aa 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -431,7 +431,6 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 		regs->ip = (unsigned long)p->ainsn.insn;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -682,8 +681,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 	/* fixup registers */
 #ifdef CONFIG_X86_64
 	regs->cs = __KERNEL_CS;
@@ -732,7 +730,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
@@ -860,7 +858,6 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 
 	resume_execution(cur, regs, kcb);
 	regs->flags |= kcb->kprobe_saved_flags;
-	trace_hardirqs_fixup_flags(regs->flags);
 
 	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
 		kcb->kprobe_status = KPROBE_HIT_SSDONE;
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 87edf1ceb1df..d02def06ca91 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -113,7 +113,7 @@ static void kvm_setup_secondary_clock(void)
 #endif
 
 #ifdef CONFIG_SMP
-void __init kvm_smp_prepare_boot_cpu(void)
+static void __init kvm_smp_prepare_boot_cpu(void)
 {
 	WARN_ON(kvm_register_clock("primary cpu clock"));
 	native_smp_prepare_boot_cpu();
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 0224c3637c73..3fee2aa50f3f 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -20,9 +20,9 @@
 #include <asm/mmu_context.h>
 
 #ifdef CONFIG_SMP
-static void flush_ldt(void *null)
+static void flush_ldt(void *current_mm)
 {
-	if (current->active_mm)
+	if (current->active_mm == current_mm)
 		load_LDT(&current->active_mm->context);
 }
 #endif
@@ -62,13 +62,13 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 
 	if (reload) {
 #ifdef CONFIG_SMP
-		cpumask_t mask;
+		cpumask_of_cpu_ptr_declare(mask);
 
 		preempt_disable();
 		load_LDT(pc);
-		mask = cpumask_of_cpu(smp_processor_id());
-		if (!cpus_equal(current->mm->cpu_vm_mask, mask))
-			smp_call_function(flush_ldt, NULL, 1, 1);
+		cpumask_of_cpu_ptr_next(mask, smp_processor_id());
+		if (!cpus_equal(current->mm->cpu_vm_mask, *mask))
+			smp_call_function(flush_ldt, current->mm, 1);
 		preempt_enable();
 #else
 		load_LDT(pc);
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index d0b234c9fc31..9fe478d98406 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -11,6 +11,8 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/numa.h>
+#include <linux/ftrace.h>
+
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
@@ -20,6 +22,7 @@
 #include <asm/cpufeature.h>
 #include <asm/desc.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 
 #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
 static u32 kexec_pgd[1024] PAGE_ALIGNED;
@@ -39,7 +42,7 @@ static void set_idt(void *newidt, __u16 limit)
 	curidt.address = (unsigned long)newidt;
 
 	load_idt(&curidt);
-};
+}
 
 
 static void set_gdt(void *newgdt, __u16 limit)
@@ -51,7 +54,7 @@ static void set_gdt(void *newgdt, __u16 limit)
 	curgdt.address = (unsigned long)newgdt;
 
 	load_gdt(&curgdt);
-};
+}
 
 static void load_segments(void)
 {
@@ -83,10 +86,12 @@ static void load_segments(void)
  * reboot code buffer to allow us to avoid allocations
  * later.
  *
- * Currently nothing.
+ * Make control page executable.
  */
 int machine_kexec_prepare(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_x(image->control_code_page, 1);
 	return 0;
 }
 
@@ -96,25 +101,48 @@ int machine_kexec_prepare(struct kimage *image)
  */
 void machine_kexec_cleanup(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_nx(image->control_code_page, 1);
 }
 
 /*
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
+	asmlinkage unsigned long
+		(*relocate_kernel_ptr)(unsigned long indirection_page,
+				       unsigned long control_page,
+				       unsigned long start_address,
+				       unsigned int has_pae,
+				       unsigned int preserve_context);
+
+	tracer_disable();
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
+	if (image->preserve_context) {
+#ifdef CONFIG_X86_IO_APIC
+		/* We need to put APICs in legacy mode so that we can
+		 * get timer interrupts in second kernel. kexec/kdump
+		 * paths already have calls to disable_IO_APIC() in
+		 * one form or other. kexec jump path also need
+		 * one.
+		 */
+		disable_IO_APIC();
+#endif
+	}
+
 	control_page = page_address(image->control_code_page);
-	memcpy(control_page, relocate_kernel, PAGE_SIZE);
+	memcpy(control_page, relocate_kernel, PAGE_SIZE/2);
 
+	relocate_kernel_ptr = control_page;
 	page_list[PA_CONTROL_PAGE] = __pa(control_page);
-	page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
+	page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
 	page_list[PA_PGD] = __pa(kexec_pgd);
 	page_list[VA_PGD] = (unsigned long)kexec_pgd;
 #ifdef CONFIG_X86_PAE
@@ -127,6 +155,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
 	page_list[PA_PTE_1] = __pa(kexec_pte1);
 	page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
+	page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT);
 
 	/* The segment registers are funny things, they have both a
 	 * visible and an invisible part.  Whenever the visible part is
@@ -145,8 +174,10 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	set_idt(phys_to_virt(0),0);
 
 	/* now call it */
-	relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
-			image->start, cpu_has_pae);
+	image->start = relocate_kernel_ptr((unsigned long)image->head,
+					   (unsigned long)page_list,
+					   image->start, cpu_has_pae,
+					   image->preserve_context);
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 576a03db4511..c43caa3a91f3 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -11,6 +11,8 @@
 #include <linux/string.h>
 #include <linux/reboot.h>
 #include <linux/numa.h>
+#include <linux/ftrace.h>
+
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
@@ -110,7 +112,7 @@ static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
 {
 	pgd_t *level4p;
 	level4p = (pgd_t *)__va(start_pgtable);
- 	return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT);
+	return init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT);
 }
 
 static void set_idt(void *newidt, u16 limit)
@@ -179,11 +181,13 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
 
+	tracer_disable();
+
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 69729e38b78a..6994c751590e 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -5,13 +5,14 @@
  *		      2006	Shaohua Li <shaohua.li@intel.com>
  *
  *	This driver allows to upgrade microcode on Intel processors
- *	belonging to IA-32 family - PentiumPro, Pentium II, 
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
  *	Pentium III, Xeon, Pentium 4, etc.
  *
- *	Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual, 
- *	Order Number 245472 or free download from:
- *		
- *	http://developer.intel.com/design/pentium4/manuals/245472.htm
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/design/pentium4/manuals/253668.htm
  *
  *	For more information, go to http://www.urbanmyth.org/microcode
  *
@@ -58,12 +59,12 @@
  *		nature of implementation.
  *	1.11	22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
  *		Fix the panic when writing zero-length microcode chunk.
- *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, 
+ *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
  *		Jun Nakajima <jun.nakajima@intel.com>
  *		Support for the microcode updates in the new format.
  *	1.13	10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
  *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
- *		because we no longer hold a copy of applied microcode 
+ *		because we no longer hold a copy of applied microcode
  *		in kernel memory.
  *	1.14	25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
  *		Fix sigmatch() macro to handle old CPUs with pf == 0.
@@ -75,6 +76,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/cpumask.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -320,11 +322,11 @@ static void apply_microcode(int cpu)
 		return;
 
 	/* serialize access to the physical write to MSR 0x79 */
-	spin_lock_irqsave(&microcode_update_lock, flags);          
+	spin_lock_irqsave(&microcode_update_lock, flags);
 
 	/* write microcode via MSR 0x79 */
 	wrmsr(MSR_IA32_UCODE_WRITE,
-		(unsigned long) uci->mc->bits, 
+		(unsigned long) uci->mc->bits,
 		(unsigned long) uci->mc->bits >> 16 >> 16);
 	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
 
@@ -341,7 +343,7 @@ static void apply_microcode(int cpu)
 		return;
 	}
 	printk(KERN_INFO "microcode: CPU%d updated from revision "
-	       "0x%x to 0x%x, date = %08x \n", 
+	       "0x%x to 0x%x, date = %08x \n",
 	       cpu_num, uci->rev, val[1], uci->mc->hdr.date);
 	uci->rev = val[1];
 }
@@ -386,6 +388,7 @@ static int do_microcode_update (void)
 	void *new_mc = NULL;
 	int cpu;
 	cpumask_t old;
+	cpumask_of_cpu_ptr_declare(newmask);
 
 	old = current->cpus_allowed;
 
@@ -402,7 +405,8 @@ static int do_microcode_update (void)
 
 			if (!uci->valid)
 				continue;
-			set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+			cpumask_of_cpu_ptr_next(newmask, cpu);
+			set_cpus_allowed_ptr(current, newmask);
 			error = get_maching_microcode(new_mc, cpu);
 			if (error < 0)
 				goto out;
@@ -422,6 +426,7 @@ out:
 
 static int microcode_open (struct inode *unused1, struct file *unused2)
 {
+	cycle_kernel_lock();
 	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
 }
 
@@ -488,7 +493,7 @@ MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
 #define microcode_dev_exit() do { } while(0)
 #endif
 
-static long get_next_ucode_from_buffer(void **mc, void *buf,
+static long get_next_ucode_from_buffer(void **mc, const u8 *buf,
 	unsigned long size, long offset)
 {
 	microcode_header_t *mc_header;
@@ -522,7 +527,7 @@ static int cpu_request_microcode(int cpu)
 	char name[30];
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	const struct firmware *firmware;
-	void *buf;
+	const u8 *buf;
 	unsigned long size;
 	long offset = 0;
 	int error;
@@ -534,7 +539,7 @@ static int cpu_request_microcode(int cpu)
 		c->x86, c->x86_model, c->x86_mask);
 	error = request_firmware(&firmware, name, &microcode_pdev->dev);
 	if (error) {
-		pr_debug("microcode: ucode data file %s load failed\n", name);
+		pr_debug("microcode: data file %s load failed\n", name);
 		return error;
 	}
 	buf = firmware->data;
@@ -571,6 +576,7 @@ static int apply_microcode_check_cpu(int cpu)
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	cpumask_t old;
+	cpumask_of_cpu_ptr(newmask, cpu);
 	unsigned int val[2];
 	int err = 0;
 
@@ -579,7 +585,7 @@ static int apply_microcode_check_cpu(int cpu)
 		return 0;
 
 	old = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, newmask);
 
 	/* Check if the microcode we have in memory matches the CPU */
 	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
@@ -617,11 +623,12 @@ static int apply_microcode_check_cpu(int cpu)
 static void microcode_init_cpu(int cpu, int resume)
 {
 	cpumask_t old;
+	cpumask_of_cpu_ptr(newmask, cpu);
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
 	old = current->cpus_allowed;
 
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, newmask);
 	mutex_lock(&microcode_mutex);
 	collect_cpu_info(cpu);
 	if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
@@ -641,7 +648,9 @@ static void microcode_fini_cpu(int cpu)
 	mutex_unlock(&microcode_mutex);
 }
 
-static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
+static ssize_t reload_store(struct sys_device *dev,
+			    struct sysdev_attribute *attr,
+			    const char *buf, size_t sz)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 	char *end;
@@ -653,11 +662,12 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
 		return -EINVAL;
 	if (val == 1) {
 		cpumask_t old;
+		cpumask_of_cpu_ptr(newmask, cpu);
 
 		old = current->cpus_allowed;
 
 		get_online_cpus();
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+		set_cpus_allowed_ptr(current, newmask);
 
 		mutex_lock(&microcode_mutex);
 		if (uci->valid)
@@ -671,14 +681,16 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
 	return sz;
 }
 
-static ssize_t version_show(struct sys_device *dev, char *buf)
+static ssize_t version_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
 	return sprintf(buf, "0x%x\n", uci->rev);
 }
 
-static ssize_t pf_show(struct sys_device *dev, char *buf)
+static ssize_t pf_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
@@ -805,6 +817,9 @@ static int __init microcode_init (void)
 {
 	int error;
 
+	printk(KERN_INFO
+		"IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n");
+
 	error = microcode_dev_init();
 	if (error)
 		return error;
@@ -825,9 +840,6 @@ static int __init microcode_init (void)
 	}
 
 	register_hotcpu_notifier(&mc_cpu_notifier);
-
-	printk(KERN_INFO 
-		"IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n");
 	return 0;
 }
 
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index edc5fbfe85c0..fdfdc550b366 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -12,6 +12,7 @@
 #include <asm/io.h>
 #include <asm/msr.h>
 #include <asm/acpi.h>
+#include <asm/mmconfig.h>
 
 #include "../pci/pci.h"
 
diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module_64.c
index a888e67f5874..6ba87830d4b1 100644
--- a/arch/x86/kernel/module_64.c
+++ b/arch/x86/kernel/module_64.c
@@ -22,6 +22,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/bug.h>
 
@@ -150,7 +151,8 @@ int module_finalize(const Elf_Ehdr *hdr,
                     const Elf_Shdr *sechdrs,
                     struct module *me)
 {
-	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL;
+	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL,
+		*para = NULL;
 	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 
 	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
@@ -160,6 +162,8 @@ int module_finalize(const Elf_Ehdr *hdr,
 			alt = s;
 		if (!strcmp(".smp_locks", secstrings + s->sh_name))
 			locks= s;
+		if (!strcmp(".parainstructions", secstrings + s->sh_name))
+			para = s;
 	}
 
 	if (alt) {
@@ -175,6 +179,11 @@ int module_finalize(const Elf_Ehdr *hdr,
 					    tseg, tseg + text->sh_size);
 	}
 
+	if (para) {
+		void *pseg = (void *)para->sh_addr;
+		apply_paravirt(pseg, pseg + para->sh_size);
+	}
+
 	return module_bug_finalize(hdr, sechdrs, me);
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 404683b94e79..6ae005ccaed8 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -25,6 +25,9 @@
 #include <asm/proto.h>
 #include <asm/acpi.h>
 #include <asm/bios_ebda.h>
+#include <asm/e820.h>
+#include <asm/trampoline.h>
+#include <asm/setup.h>
 
 #include <mach_apic.h>
 #ifdef CONFIG_X86_32
@@ -32,28 +35,6 @@
 #include <mach_mpparse.h>
 #endif
 
-/* Have we found an MP table */
-int smp_found_config;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-int mp_bus_id_to_type[MAX_MP_BUSSES];
-#endif
-
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
-
-static int mp_current_pci_id;
-
-int pic_mode;
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
 /*
  * Checksum an MP configuration block.
  */
@@ -68,18 +49,6 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 	return sum & 0xFF;
 }
 
-#ifdef CONFIG_X86_NUMAQ
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
-    __cpuinitdata;
-#endif
-
 static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 {
 	int apicid;
@@ -89,11 +58,12 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 		disabled_cpus++;
 		return;
 	}
-#ifdef CONFIG_X86_NUMAQ
-	apicid = mpc_apic_id(m, translation_table[mpc_record]);
-#else
-	apicid = m->mpc_apicid;
-#endif
+
+	if (x86_quirks->mpc_apic_id)
+		apicid = x86_quirks->mpc_apic_id(m);
+	else
+		apicid = m->mpc_apicid;
+
 	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
 		bootup_cpu = " (Bootup-CPU)";
 		boot_cpu_physical_apicid = m->mpc_apicid;
@@ -103,18 +73,17 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 	generic_processor_info(apicid, m->mpc_apicver);
 }
 
+#ifdef CONFIG_X86_IO_APIC
 static void __init MP_bus_info(struct mpc_config_bus *m)
 {
 	char str[7];
-
 	memcpy(str, m->mpc_bustype, 6);
 	str[6] = 0;
 
-#ifdef CONFIG_X86_NUMAQ
-	mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-#else
-	Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
-#endif
+	if (x86_quirks->mpc_oem_bus_info)
+		x86_quirks->mpc_oem_bus_info(m, str);
+	else
+		printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
 
 #if MAX_MP_BUSSES < 256
 	if (m->mpc_busid >= MAX_MP_BUSSES) {
@@ -131,12 +100,10 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
 #endif
 	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
-#ifdef CONFIG_X86_NUMAQ
-		mpc_oem_pci_bus(m, translation_table[mpc_record]);
-#endif
+		if (x86_quirks->mpc_oem_pci_bus)
+			x86_quirks->mpc_oem_pci_bus(m);
+
 		clear_bit(m->mpc_busid, mp_bus_not_pci);
-		mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
-		mp_current_pci_id++;
 #if defined(CONFIG_EISA) || defined (CONFIG_MCA)
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
 	} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
@@ -147,6 +114,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 	} else
 		printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
 }
+#endif
 
 #ifdef CONFIG_X86_IO_APIC
 
@@ -176,117 +144,111 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
 	if (bad_ioapic(m->mpc_apicaddr))
 		return;
 
-	mp_ioapics[nr_ioapics] = *m;
+	mp_ioapics[nr_ioapics].mp_apicaddr = m->mpc_apicaddr;
+	mp_ioapics[nr_ioapics].mp_apicid = m->mpc_apicid;
+	mp_ioapics[nr_ioapics].mp_type = m->mpc_type;
+	mp_ioapics[nr_ioapics].mp_apicver = m->mpc_apicver;
+	mp_ioapics[nr_ioapics].mp_flags = m->mpc_flags;
 	nr_ioapics++;
 }
 
-static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
+static void print_MP_intsrc_info(struct mpc_config_intsrc *m)
 {
-	mp_irqs[mp_irq_entries] = *m;
-	Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
+	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
 		m->mpc_irqtype, m->mpc_irqflag & 3,
 		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
 		m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
-	if (++mp_irq_entries == MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!!\n");
 }
 
-#endif
-
-static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
+static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq)
 {
-	Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
-		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
-		m->mpc_irqtype, m->mpc_irqflag & 3,
-		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
-		m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
+	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
+		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
+		mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3,
+		(mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus,
+		mp_irq->mp_srcbusirq, mp_irq->mp_dstapic, mp_irq->mp_dstirq);
 }
 
-#ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info(struct mpc_config_translation *m)
+static void __init assign_to_mp_irq(struct mpc_config_intsrc *m,
+				    struct mp_config_intsrc *mp_irq)
 {
-	printk(KERN_INFO
-	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
-	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
-	       m->trans_local);
+	mp_irq->mp_dstapic = m->mpc_dstapic;
+	mp_irq->mp_type = m->mpc_type;
+	mp_irq->mp_irqtype = m->mpc_irqtype;
+	mp_irq->mp_irqflag = m->mpc_irqflag;
+	mp_irq->mp_srcbus = m->mpc_srcbus;
+	mp_irq->mp_srcbusirq = m->mpc_srcbusirq;
+	mp_irq->mp_dstirq = m->mpc_dstirq;
+}
 
-	if (mpc_record >= MAX_MPC_ENTRY)
-		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
-	else
-		translation_table[mpc_record] = m;	/* stash this for later */
-	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
-		node_set_online(m->trans_quad);
+static void __init assign_to_mpc_intsrc(struct mp_config_intsrc *mp_irq,
+					struct mpc_config_intsrc *m)
+{
+	m->mpc_dstapic = mp_irq->mp_dstapic;
+	m->mpc_type = mp_irq->mp_type;
+	m->mpc_irqtype = mp_irq->mp_irqtype;
+	m->mpc_irqflag = mp_irq->mp_irqflag;
+	m->mpc_srcbus = mp_irq->mp_srcbus;
+	m->mpc_srcbusirq = mp_irq->mp_srcbusirq;
+	m->mpc_dstirq = mp_irq->mp_dstirq;
 }
 
-/*
- * Read/parse the MPC oem tables
- */
+static int __init mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq,
+					struct mpc_config_intsrc *m)
+{
+	if (mp_irq->mp_dstapic != m->mpc_dstapic)
+		return 1;
+	if (mp_irq->mp_type != m->mpc_type)
+		return 2;
+	if (mp_irq->mp_irqtype != m->mpc_irqtype)
+		return 3;
+	if (mp_irq->mp_irqflag != m->mpc_irqflag)
+		return 4;
+	if (mp_irq->mp_srcbus != m->mpc_srcbus)
+		return 5;
+	if (mp_irq->mp_srcbusirq != m->mpc_srcbusirq)
+		return 6;
+	if (mp_irq->mp_dstirq != m->mpc_dstirq)
+		return 7;
+
+	return 0;
+}
 
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
-				    unsigned short oemsize)
+static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
 {
-	int count = sizeof(*oemtable);	/* the header size */
-	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
-
-	mpc_record = 0;
-	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
-	       oemtable);
-	if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
-		printk(KERN_WARNING
-		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
-		       oemtable->oem_signature[0], oemtable->oem_signature[1],
-		       oemtable->oem_signature[2], oemtable->oem_signature[3]);
-		return;
-	}
-	if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
-		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
-		return;
-	}
-	while (count < oemtable->oem_length) {
-		switch (*oemptr) {
-		case MP_TRANSLATION:
-			{
-				struct mpc_config_translation *m =
-				    (struct mpc_config_translation *)oemptr;
-				MP_translation_info(m);
-				oemptr += sizeof(*m);
-				count += sizeof(*m);
-				++mpc_record;
-				break;
-			}
-		default:
-			{
-				printk(KERN_WARNING
-				       "Unrecognised OEM table entry type! - %d\n",
-				       (int)*oemptr);
-				return;
-			}
-		}
+	int i;
+
+	print_MP_intsrc_info(m);
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m))
+			return;
 	}
+
+	assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!!\n");
 }
 
-static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
-				 char *productid)
+#endif
+
+static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
 {
-	if (strncmp(oem, "IBM NUMA", 8))
-		printk("Warning!  May not be a NUMA-Q system!\n");
-	if (mpc->mpc_oemptr)
-		smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
-				 mpc->mpc_oemsize);
+	printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x,"
+		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
+		m->mpc_irqtype, m->mpc_irqflag & 3,
+		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
+		m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
 }
-#endif /* CONFIG_X86_NUMAQ */
 
 /*
  * Read/parse the MPC
  */
 
-static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
+static int __init smp_check_mpc(struct mp_config_table *mpc, char *oem,
+				char *str)
 {
-	char str[16];
-	char oem[10];
-	int count = sizeof(*mpc);
-	unsigned char *mpt = ((unsigned char *)mpc) + count;
 
 	if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) {
 		printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n",
@@ -309,19 +271,41 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 	}
 	memcpy(oem, mpc->mpc_oem, 8);
 	oem[8] = 0;
-	printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem);
+	printk(KERN_INFO "MPTABLE: OEM ID: %s\n", oem);
 
 	memcpy(str, mpc->mpc_productid, 12);
 	str[12] = 0;
-	printk("Product ID: %s ", str);
 
-#ifdef CONFIG_X86_32
-	mps_oem_check(mpc, oem, str);
-#endif
-	printk(KERN_INFO "MPTABLE: Product ID: %s ", str);
+	printk(KERN_INFO "MPTABLE: Product ID: %s\n", str);
 
 	printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic);
 
+	return 1;
+}
+
+static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
+{
+	char str[16];
+	char oem[10];
+
+	int count = sizeof(*mpc);
+	unsigned char *mpt = ((unsigned char *)mpc) + count;
+
+	if (!smp_check_mpc(mpc, oem, str))
+		return 0;
+
+#ifdef CONFIG_X86_32
+	/*
+	 * need to make sure summit and es7000's mps_oem_check is safe to be
+	 * called early via genericarch 's mps_oem_check
+	 */
+	if (early) {
+#ifdef CONFIG_X86_NUMAQ
+		numaq_mps_oem_check(mpc, oem, str);
+#endif
+	} else
+		mps_oem_check(mpc, oem, str);
+#endif
 	/* save the local APIC address, it might be non-default */
 	if (!acpi_lapic)
 		mp_lapic_addr = mpc->mpc_lapic;
@@ -329,12 +313,17 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 	if (early)
 		return 1;
 
+	if (mpc->mpc_oemptr && x86_quirks->smp_read_mpc_oem) {
+		struct mp_config_oemtable *oem_table = (struct mp_config_oemtable *)(unsigned long)mpc->mpc_oemptr;
+		x86_quirks->smp_read_mpc_oem(oem_table, mpc->mpc_oemsize);
+	}
+
 	/*
 	 *      Now process the configuration blocks.
 	 */
-#ifdef CONFIG_X86_NUMAQ
-	mpc_record = 0;
-#endif
+	if (x86_quirks->mpc_record)
+		*x86_quirks->mpc_record = 0;
+
 	while (count < mpc->mpc_length) {
 		switch (*mpt) {
 		case MP_PROCESSOR:
@@ -352,7 +341,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 			{
 				struct mpc_config_bus *m =
 				    (struct mpc_config_bus *)mpt;
+#ifdef CONFIG_X86_IO_APIC
 				MP_bus_info(m);
+#endif
 				mpt += sizeof(*m);
 				count += sizeof(*m);
 				break;
@@ -398,10 +389,14 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 			count = mpc->mpc_length;
 			break;
 		}
-#ifdef CONFIG_X86_NUMAQ
-		++mpc_record;
-#endif
+		if (x86_quirks->mpc_record)
+			(*x86_quirks->mpc_record)++;
 	}
+
+#ifdef CONFIG_X86_GENERICARCH
+       generic_bigsmp_probe();
+#endif
+
 	setup_apic_routing();
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
@@ -427,7 +422,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 	intsrc.mpc_type = MP_INTSRC;
 	intsrc.mpc_irqflag = 0;	/* conforming */
 	intsrc.mpc_srcbus = 0;
-	intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
+	intsrc.mpc_dstapic = mp_ioapics[0].mp_apicid;
 
 	intsrc.mpc_irqtype = mp_INT;
 
@@ -488,40 +483,11 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 	MP_intsrc_info(&intsrc);
 }
 
-#endif
 
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+static void construct_ioapic_table(int mpc_default_type)
 {
-	struct mpc_config_processor processor;
-	struct mpc_config_bus bus;
-#ifdef CONFIG_X86_IO_APIC
 	struct mpc_config_ioapic ioapic;
-#endif
-	struct mpc_config_lintsrc lintsrc;
-	int linttypes[2] = { mp_ExtINT, mp_NMI };
-	int i;
-
-	/*
-	 * local APIC has default address
-	 */
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
-	/*
-	 * 2 CPUs, numbered 0 & 1.
-	 */
-	processor.mpc_type = MP_PROCESSOR;
-	/* Either an integrated APIC or a discrete 82489DX. */
-	processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
-	processor.mpc_cpuflag = CPU_ENABLED;
-	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
-	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
-	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
-	processor.mpc_reserved[0] = 0;
-	processor.mpc_reserved[1] = 0;
-	for (i = 0; i < 2; i++) {
-		processor.mpc_apicid = i;
-		MP_processor_info(&processor);
-	}
+	struct mpc_config_bus bus;
 
 	bus.mpc_type = MP_BUS;
 	bus.mpc_busid = 0;
@@ -550,7 +516,6 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 		MP_bus_info(&bus);
 	}
 
-#ifdef CONFIG_X86_IO_APIC
 	ioapic.mpc_type = MP_IOAPIC;
 	ioapic.mpc_apicid = 2;
 	ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
@@ -562,7 +527,42 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 	 * We set up most of the low 16 IO-APIC pins according to MPS rules.
 	 */
 	construct_default_ioirq_mptable(mpc_default_type);
+}
+#else
+static inline void construct_ioapic_table(int mpc_default_type) { }
 #endif
+
+static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+{
+	struct mpc_config_processor processor;
+	struct mpc_config_lintsrc lintsrc;
+	int linttypes[2] = { mp_ExtINT, mp_NMI };
+	int i;
+
+	/*
+	 * local APIC has default address
+	 */
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	/*
+	 * 2 CPUs, numbered 0 & 1.
+	 */
+	processor.mpc_type = MP_PROCESSOR;
+	/* Either an integrated APIC or a discrete 82489DX. */
+	processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+	processor.mpc_cpuflag = CPU_ENABLED;
+	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
+	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+	processor.mpc_reserved[0] = 0;
+	processor.mpc_reserved[1] = 0;
+	for (i = 0; i < 2; i++) {
+		processor.mpc_apicid = i;
+		MP_processor_info(&processor);
+	}
+
+	construct_ioapic_table(mpc_default_type);
+
 	lintsrc.mpc_type = MP_LINTSRC;
 	lintsrc.mpc_irqflag = 0;	/* conforming */
 	lintsrc.mpc_srcbusid = 0;
@@ -580,10 +580,14 @@ static struct intel_mp_floating *mpf_found;
 /*
  * Scan the memory blocks for an SMP configuration block.
  */
-static void __init __get_smp_config(unsigned early)
+static void __init __get_smp_config(unsigned int early)
 {
 	struct intel_mp_floating *mpf = mpf_found;
 
+	if (x86_quirks->mach_get_smp_config) {
+		if (x86_quirks->mach_get_smp_config(early))
+			return;
+	}
 	if (acpi_lapic && early)
 		return;
 	/*
@@ -600,7 +604,7 @@ static void __init __get_smp_config(unsigned early)
 
 	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
 	       mpf->mpf_specification);
-#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
 	if (mpf->mpf_feature2 & (1 << 7)) {
 		printk(KERN_INFO "    IMCR and PIC compatibility mode.\n");
 		pic_mode = 1;
@@ -632,7 +636,9 @@ static void __init __get_smp_config(unsigned early)
 		 * override the defaults.
 		 */
 		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) {
+#ifdef CONFIG_X86_LOCAL_APIC
 			smp_found_config = 0;
+#endif
 			printk(KERN_ERR
 			       "BIOS bug, MP table errors detected!...\n");
 			printk(KERN_ERR "... disabling SMP support. "
@@ -689,7 +695,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	unsigned int *bp = phys_to_virt(base);
 	struct intel_mp_floating *mpf;
 
-	Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length);
+	printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length);
 	BUILD_BUG_ON(sizeof(*mpf) != 16);
 
 	while (length > 0) {
@@ -699,15 +705,21 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 		    !mpf_checksum((unsigned char *)bp, 16) &&
 		    ((mpf->mpf_specification == 1)
 		     || (mpf->mpf_specification == 4))) {
-
+#ifdef CONFIG_X86_LOCAL_APIC
 			smp_found_config = 1;
+#endif
 			mpf_found = mpf;
-#ifdef CONFIG_X86_32
+
 			printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
 			       mpf, virt_to_phys(mpf));
-			reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE,
+
+			if (!reserve)
+				return 1;
+			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE,
 					BOOTMEM_DEFAULT);
 			if (mpf->mpf_physptr) {
+				unsigned long size = PAGE_SIZE;
+#ifdef CONFIG_X86_32
 				/*
 				 * We cannot access to MPC table to compute
 				 * table size yet, as only few megabytes from
@@ -717,24 +729,15 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 				 * PAGE_SIZE from mpg->mpf_physptr yields BUG()
 				 * in reserve_bootmem.
 				 */
-				unsigned long size = PAGE_SIZE;
 				unsigned long end = max_low_pfn * PAGE_SIZE;
 				if (mpf->mpf_physptr + size > end)
 					size = end - mpf->mpf_physptr;
-				reserve_bootmem(mpf->mpf_physptr, size,
+#endif
+				reserve_bootmem_generic(mpf->mpf_physptr, size,
 						BOOTMEM_DEFAULT);
 			}
 
-#else
-			if (!reserve)
-				return 1;
-
-			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
-			if (mpf->mpf_physptr)
-				reserve_bootmem_generic(mpf->mpf_physptr,
-							PAGE_SIZE);
-#endif
-		return 1;
+			return 1;
 		}
 		bp += 4;
 		length -= 16;
@@ -742,10 +745,14 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	return 0;
 }
 
-static void __init __find_smp_config(unsigned reserve)
+static void __init __find_smp_config(unsigned int reserve)
 {
 	unsigned int address;
 
+	if (x86_quirks->mach_find_smp_config) {
+		if (x86_quirks->mach_find_smp_config(reserve))
+			return;
+	}
 	/*
 	 * FIXME: Linux assumes you have 640K of base ram..
 	 * this continues the error...
@@ -790,298 +797,294 @@ void __init find_smp_config(void)
 	__find_smp_config(1);
 }
 
-/* --------------------------------------------------------------------------
-                            ACPI-based MP Configuration
-   -------------------------------------------------------------------------- */
+#ifdef CONFIG_X86_IO_APIC
+static u8 __initdata irq_used[MAX_IRQ_SOURCES];
 
-/*
- * Keep this outside and initialized to 0, for !CONFIG_ACPI builds:
- */
-int es7000_plat;
+static int  __init get_MP_intsrc_index(struct mpc_config_intsrc *m)
+{
+	int i;
 
-#ifdef CONFIG_ACPI
+	if (m->mpc_irqtype != mp_INT)
+		return 0;
 
-#ifdef	CONFIG_X86_IO_APIC
+	if (m->mpc_irqflag != 0x0f)
+		return 0;
 
-#define MP_ISA_BUS		0
+	/* not legacy */
 
-extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (mp_irqs[i].mp_irqtype != mp_INT)
+			continue;
 
-static int mp_find_ioapic(int gsi)
-{
-	int i = 0;
+		if (mp_irqs[i].mp_irqflag != 0x0f)
+			continue;
 
-	/* Find the IOAPIC that manages this GSI. */
-	for (i = 0; i < nr_ioapics; i++) {
-		if ((gsi >= mp_ioapic_routing[i].gsi_base)
-		    && (gsi <= mp_ioapic_routing[i].gsi_end))
-			return i;
+		if (mp_irqs[i].mp_srcbus != m->mpc_srcbus)
+			continue;
+		if (mp_irqs[i].mp_srcbusirq != m->mpc_srcbusirq)
+			continue;
+		if (irq_used[i]) {
+			/* already claimed */
+			return -2;
+		}
+		irq_used[i] = 1;
+		return i;
 	}
 
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+	/* not found */
 	return -1;
 }
 
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return io_apic_get_unique_id(nr_ioapics, id);
-	else
-		return id;
-#else
-	int i;
-	DECLARE_BITMAP(used, 256);
-	bitmap_zero(used, 256);
-	for (i = 0; i < nr_ioapics; i++) {
-		struct mpc_config_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->mpc_apicid, used);
-	}
-	if (!test_bit(id, used))
-		return id;
-	return find_first_zero_bit(used, 256);
+#define SPARE_SLOT_NUM 20
+
+static struct mpc_config_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
 #endif
-}
 
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+static int  __init replace_intsrc_all(struct mp_config_table *mpc,
+					unsigned long mpc_new_phys,
+					unsigned long mpc_new_length)
 {
-	int idx = 0;
-
-	if (bad_ioapic(address))
-		return;
+#ifdef CONFIG_X86_IO_APIC
+	int i;
+	int nr_m_spare = 0;
+#endif
 
-	idx = nr_ioapics;
+	int count = sizeof(*mpc);
+	unsigned char *mpt = ((unsigned char *)mpc) + count;
 
-	mp_ioapics[idx].mpc_type = MP_IOAPIC;
-	mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].mpc_apicaddr = address;
+	printk(KERN_INFO "mpc_length %x\n", mpc->mpc_length);
+	while (count < mpc->mpc_length) {
+		switch (*mpt) {
+		case MP_PROCESSOR:
+			{
+				struct mpc_config_processor *m =
+				    (struct mpc_config_processor *)mpt;
+				mpt += sizeof(*m);
+				count += sizeof(*m);
+				break;
+			}
+		case MP_BUS:
+			{
+				struct mpc_config_bus *m =
+				    (struct mpc_config_bus *)mpt;
+				mpt += sizeof(*m);
+				count += sizeof(*m);
+				break;
+			}
+		case MP_IOAPIC:
+			{
+				mpt += sizeof(struct mpc_config_ioapic);
+				count += sizeof(struct mpc_config_ioapic);
+				break;
+			}
+		case MP_INTSRC:
+			{
+#ifdef CONFIG_X86_IO_APIC
+				struct mpc_config_intsrc *m =
+				    (struct mpc_config_intsrc *)mpt;
 
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
-	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
-#else
-	mp_ioapics[idx].mpc_apicver = 0;
+				printk(KERN_INFO "OLD ");
+				print_MP_intsrc_info(m);
+				i = get_MP_intsrc_index(m);
+				if (i > 0) {
+					assign_to_mpc_intsrc(&mp_irqs[i], m);
+					printk(KERN_INFO "NEW ");
+					print_mp_irq_info(&mp_irqs[i]);
+				} else if (!i) {
+					/* legacy, do nothing */
+				} else if (nr_m_spare < SPARE_SLOT_NUM) {
+					/*
+					 * not found (-1), or duplicated (-2)
+					 * are invalid entries,
+					 * we need to use the slot  later
+					 */
+					m_spare[nr_m_spare] = m;
+					nr_m_spare++;
+				}
 #endif
-	/*
-	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
-	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
-	mp_ioapic_routing[idx].gsi_base = gsi_base;
-	mp_ioapic_routing[idx].gsi_end = gsi_base +
-	    io_apic_get_redir_entries(idx);
-
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
-	       "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
-	       mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
-	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
-	nr_ioapics++;
-}
+				mpt += sizeof(struct mpc_config_intsrc);
+				count += sizeof(struct mpc_config_intsrc);
+				break;
+			}
+		case MP_LINTSRC:
+			{
+				struct mpc_config_lintsrc *m =
+				    (struct mpc_config_lintsrc *)mpt;
+				mpt += sizeof(*m);
+				count += sizeof(*m);
+				break;
+			}
+		default:
+			/* wrong mptable */
+			printk(KERN_ERR "Your mptable is wrong, contact your HW vendor!\n");
+			printk(KERN_ERR "type %x\n", *mpt);
+			print_hex_dump(KERN_ERR, "  ", DUMP_PREFIX_ADDRESS, 16,
+					1, mpc, mpc->mpc_length, 1);
+			goto out;
+		}
+	}
 
-void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
-{
-	struct mpc_config_intsrc intsrc;
-	int ioapic = -1;
-	int pin = -1;
+#ifdef CONFIG_X86_IO_APIC
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (irq_used[i])
+			continue;
 
-	/*
-	 * Convert 'gsi' to 'ioapic.pin'.
-	 */
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0)
-		return;
-	pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+		if (mp_irqs[i].mp_irqtype != mp_INT)
+			continue;
 
-	/*
-	 * TBD: This check is for faulty timer entries, where the override
-	 *      erroneously sets the trigger to level, resulting in a HUGE
-	 *      increase of timer interrupts!
-	 */
-	if ((bus_irq == 0) && (trigger == 3))
-		trigger = 1;
+		if (mp_irqs[i].mp_irqflag != 0x0f)
+			continue;
 
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqtype = mp_INT;
-	intsrc.mpc_irqflag = (trigger << 2) | polarity;
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-	intsrc.mpc_srcbusirq = bus_irq;	/* IRQ */
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;	/* APIC ID */
-	intsrc.mpc_dstirq = pin;	/* INTIN# */
+		if (nr_m_spare > 0) {
+			printk(KERN_INFO "*NEW* found ");
+			nr_m_spare--;
+			assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]);
+			m_spare[nr_m_spare] = NULL;
+		} else {
+			struct mpc_config_intsrc *m =
+			    (struct mpc_config_intsrc *)mpt;
+			count += sizeof(struct mpc_config_intsrc);
+			if (!mpc_new_phys) {
+				printk(KERN_INFO "No spare slots, try to append...take your risk, new mpc_length %x\n", count);
+			} else {
+				if (count <= mpc_new_length)
+					printk(KERN_INFO "No spare slots, try to append..., new mpc_length %x\n", count);
+				else {
+					printk(KERN_ERR "mpc_new_length %lx is too small\n", mpc_new_length);
+					goto out;
+				}
+			}
+			assign_to_mpc_intsrc(&mp_irqs[i], m);
+			mpc->mpc_length = count;
+			mpt += sizeof(struct mpc_config_intsrc);
+		}
+		print_mp_irq_info(&mp_irqs[i]);
+	}
+#endif
+out:
+	/* update checksum */
+	mpc->mpc_checksum = 0;
+	mpc->mpc_checksum -= mpf_checksum((unsigned char *)mpc,
+					   mpc->mpc_length);
 
-	MP_intsrc_info(&intsrc);
+	return 0;
 }
 
-void __init mp_config_acpi_legacy_irqs(void)
-{
-	struct mpc_config_intsrc intsrc;
-	int i = 0;
-	int ioapic = -1;
+static int __initdata enable_update_mptable;
 
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-	/*
-	 * Fabricate the legacy ISA bus (bus #31).
-	 */
-	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
-#endif
-	set_bit(MP_ISA_BUS, mp_bus_not_pci);
-	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+static int __init update_mptable_setup(char *str)
+{
+	enable_update_mptable = 1;
+	return 0;
+}
+early_param("update_mptable", update_mptable_setup);
 
-	/*
-	 * Older generations of ES7000 have no legacy identity mappings
-	 */
-	if (es7000_plat == 1)
-		return;
+static unsigned long __initdata mpc_new_phys;
+static unsigned long mpc_new_length __initdata = 4096;
 
-	/*
-	 * Locate the IOAPIC that manages the ISA IRQs (0-15).
-	 */
-	ioapic = mp_find_ioapic(0);
-	if (ioapic < 0)
-		return;
+/* alloc_mptable or alloc_mptable=4k */
+static int __initdata alloc_mptable;
+static int __init parse_alloc_mptable_opt(char *p)
+{
+	enable_update_mptable = 1;
+	alloc_mptable = 1;
+	if (!p)
+		return 0;
+	mpc_new_length = memparse(p, &p);
+	return 0;
+}
+early_param("alloc_mptable", parse_alloc_mptable_opt);
 
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;	/* Conforming */
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-#ifdef CONFIG_X86_IO_APIC
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
+void __init early_reserve_e820_mpc_new(void)
+{
+	if (enable_update_mptable && alloc_mptable) {
+		u64 startt = 0;
+#ifdef CONFIG_X86_TRAMPOLINE
+		startt = TRAMPOLINE_BASE;
 #endif
-	/*
-	 * Use the default configuration for the IRQs 0-15.  Unless
-	 * overridden by (MADT) interrupt source override entries.
-	 */
-	for (i = 0; i < 16; i++) {
-		int idx;
-
-		for (idx = 0; idx < mp_irq_entries; idx++) {
-			struct mpc_config_intsrc *irq = mp_irqs + idx;
-
-			/* Do we already have a mapping for this ISA IRQ? */
-			if (irq->mpc_srcbus == MP_ISA_BUS
-			    && irq->mpc_srcbusirq == i)
-				break;
-
-			/* Do we already have a mapping for this IOAPIC pin */
-			if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
-			    (irq->mpc_dstirq == i))
-				break;
-		}
-
-		if (idx != mp_irq_entries) {
-			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
-			continue;	/* IRQ already used */
-		}
-
-		intsrc.mpc_irqtype = mp_INT;
-		intsrc.mpc_srcbusirq = i;	/* Identity mapped */
-		intsrc.mpc_dstirq = i;
-
-		MP_intsrc_info(&intsrc);
+		mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4);
 	}
 }
 
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int __init update_mp_table(void)
 {
-	int ioapic;
-	int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM	4096
-#define IRQ_COMPRESSION_START	64
+	char str[16];
+	char oem[10];
+	struct intel_mp_floating *mpf;
+	struct mp_config_table *mpc;
+	struct mp_config_table *mpc_new;
+
+	if (!enable_update_mptable)
+		return 0;
+
+	mpf = mpf_found;
+	if (!mpf)
+		return 0;
 
-	static int pci_irq = IRQ_COMPRESSION_START;
 	/*
-	 * Mapping between Global System Interrupts, which
-	 * represent all possible interrupts, and IRQs
-	 * assigned to actual devices.
+	 * Now see if we need to go further.
 	 */
-	static int gsi_to_irq[MAX_GSI_NUM];
-#else
+	if (mpf->mpf_feature1 != 0)
+		return 0;
 
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return gsi;
-#endif
+	if (!mpf->mpf_physptr)
+		return 0;
 
-	/* Don't set up the ACPI SCI because it's already set up */
-	if (acpi_gbl_FADT.sci_interrupt == gsi)
-		return gsi;
+	mpc = phys_to_virt(mpf->mpf_physptr);
 
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0) {
-		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
-		return gsi;
-	}
+	if (!smp_check_mpc(mpc, oem, str))
+		return 0;
 
-	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+	printk(KERN_INFO "mpf: %lx\n", virt_to_phys(mpf));
+	printk(KERN_INFO "mpf_physptr: %x\n", mpf->mpf_physptr);
 
-#ifdef CONFIG_X86_32
-	if (ioapic_renumber_irq)
-		gsi = ioapic_renumber_irq(ioapic, gsi);
-#endif
-
-	/*
-	 * Avoid pin reprogramming.  PRTs typically include entries
-	 * with redundant pin->gsi mappings (but unique PCI devices);
-	 * we only program the IOAPIC on the first.
-	 */
-	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
-		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
-		       ioapic_pin);
-		return gsi;
+	if (mpc_new_phys && mpc->mpc_length > mpc_new_length) {
+		mpc_new_phys = 0;
+		printk(KERN_INFO "mpc_new_length is %ld, please use alloc_mptable=8k\n",
+			 mpc_new_length);
 	}
-	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
-			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
-		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
-		return gsi;
-#endif
+
+	if (!mpc_new_phys) {
+		unsigned char old, new;
+		/* check if we can change the postion */
+		mpc->mpc_checksum = 0;
+		old = mpf_checksum((unsigned char *)mpc, mpc->mpc_length);
+		mpc->mpc_checksum = 0xff;
+		new = mpf_checksum((unsigned char *)mpc, mpc->mpc_length);
+		if (old == new) {
+			printk(KERN_INFO "mpc is readonly, please try alloc_mptable instead\n");
+			return 0;
+		}
+		printk(KERN_INFO "use in-positon replacing\n");
+	} else {
+		mpf->mpf_physptr = mpc_new_phys;
+		mpc_new = phys_to_virt(mpc_new_phys);
+		memcpy(mpc_new, mpc, mpc->mpc_length);
+		mpc = mpc_new;
+		/* check if we can modify that */
+		if (mpc_new_phys - mpf->mpf_physptr) {
+			struct intel_mp_floating *mpf_new;
+			/* steal 16 bytes from [0, 1k) */
+			printk(KERN_INFO "mpf new: %x\n", 0x400 - 16);
+			mpf_new = phys_to_virt(0x400 - 16);
+			memcpy(mpf_new, mpf, 16);
+			mpf = mpf_new;
+			mpf->mpf_physptr = mpc_new_phys;
+		}
+		mpf->mpf_checksum = 0;
+		mpf->mpf_checksum -= mpf_checksum((unsigned char *)mpf, 16);
+		printk(KERN_INFO "mpf_physptr new: %x\n", mpf->mpf_physptr);
 	}
 
-	set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
 	/*
-	 * For GSI >= 64, use IRQ compression
+	 * only replace the one with mp_INT and
+	 *	 MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
+	 * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
+	 * may need pci=routeirq for all coverage
 	 */
-	if ((gsi >= IRQ_COMPRESSION_START)
-	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
-		/*
-		 * For PCI devices assign IRQs in order, avoiding gaps
-		 * due to unused I/O APIC pins.
-		 */
-		int irq = gsi;
-		if (gsi < MAX_GSI_NUM) {
-			/*
-			 * Retain the VIA chipset work-around (gsi > 15), but
-			 * avoid a problem where the 8254 timer (IRQ0) is setup
-			 * via an override (so it's not on pin 0 of the ioapic),
-			 * and at the same time, the pin 0 interrupt is a PCI
-			 * type.  The gsi > 15 test could cause these two pins
-			 * to be shared as IRQ0, and they are not shareable.
-			 * So test for this condition, and if necessary, avoid
-			 * the pin collision.
-			 */
-			gsi = pci_irq++;
-			/*
-			 * Don't assign IRQ used by ACPI SCI
-			 */
-			if (gsi == acpi_gbl_FADT.sci_interrupt)
-				gsi = pci_irq++;
-			gsi_to_irq[irq] = gsi;
-		} else {
-			printk(KERN_ERR "GSI %u is too high\n", gsi);
-			return gsi;
-		}
-	}
-#endif
-	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	return gsi;
+	replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
+
+	return 0;
 }
 
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_ACPI */
+late_initcall(update_mp_table);
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 1f3abe048e93..9fd809552447 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -117,12 +117,20 @@ static int msr_open(struct inode *inode, struct file *file)
 {
 	unsigned int cpu = iminor(file->f_path.dentry->d_inode);
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	int ret = 0;
 
-	if (cpu >= NR_CPUS || !cpu_online(cpu))
-		return -ENXIO;	/* No such CPU */
-	if (!cpu_has(c, X86_FEATURE_MSR))
-		return -EIO;	/* MSR not supported */
+	lock_kernel();
+	cpu = iminor(file->f_path.dentry->d_inode);
 
+	if (cpu >= NR_CPUS || !cpu_online(cpu)) {
+		ret = -ENXIO;	/* No such CPU */
+		goto out;
+	}
+	c = &cpu_data(cpu);
+	if (!cpu_has(c, X86_FEATURE_MSR))
+		ret = -EIO;	/* MSR not supported */
+out:
+	unlock_kernel();
 	return 0;
 }
 
@@ -141,8 +149,8 @@ static int __cpuinit msr_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
-			    "msr%d", cpu);
+	dev = device_create_drvdata(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
+				    NULL, "msr%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi.c
index 5a29ded994fa..ac6d51222e7d 100644
--- a/arch/x86/kernel/nmi_64.c
+++ b/arch/x86/kernel/nmi.c
@@ -6,10 +6,13 @@
  *  Fixes:
  *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
  *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
+ *  Mikael Pettersson	: Pentium 4 support for local APIC NMI watchdog.
  *  Pavel Machek and
  *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
  */
 
+#include <asm/apic.h>
+
 #include <linux/nmi.h>
 #include <linux/mm.h>
 #include <linux/delay.h>
@@ -17,20 +20,26 @@
 #include <linux/module.h>
 #include <linux/sysdev.h>
 #include <linux/sysctl.h>
+#include <linux/percpu.h>
 #include <linux/kprobes.h>
 #include <linux/cpumask.h>
+#include <linux/kernel_stat.h>
 #include <linux/kdebug.h>
+#include <linux/smp.h>
 
+#include <asm/i8259.h>
+#include <asm/io_apic.h>
 #include <asm/smp.h>
 #include <asm/nmi.h>
 #include <asm/proto.h>
+#include <asm/timer.h>
+
 #include <asm/mce.h>
 
 #include <mach_traps.h>
 
 int unknown_nmi_panic;
 int nmi_watchdog_enabled;
-int panic_on_unrecovered_nmi;
 
 static cpumask_t backtrace_mask = CPU_MASK_NONE;
 
@@ -41,37 +50,65 @@ static cpumask_t backtrace_mask = CPU_MASK_NONE;
  *  0: the lapic NMI watchdog is disabled, but can be enabled
  */
 atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
+EXPORT_SYMBOL(nmi_active);
+
+unsigned int nmi_watchdog = NMI_NONE;
+EXPORT_SYMBOL(nmi_watchdog);
+
 static int panic_on_timeout;
 
-unsigned int nmi_watchdog = NMI_DEFAULT;
 static unsigned int nmi_hz = HZ;
-
 static DEFINE_PER_CPU(short, wd_enabled);
+static int endflag __initdata;
 
-/* Run after command line and cpu_init init, but before all other checks */
-void nmi_watchdog_default(void)
+static inline unsigned int get_nmi_count(int cpu)
 {
-	if (nmi_watchdog != NMI_DEFAULT)
-		return;
-	nmi_watchdog = NMI_NONE;
+#ifdef CONFIG_X86_64
+	return cpu_pda(cpu)->__nmi_count;
+#else
+	return nmi_count(cpu);
+#endif
+}
+
+static inline int mce_in_progress(void)
+{
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+	return atomic_read(&mce_entry) > 0;
+#endif
+	return 0;
 }
 
-static int endflag __initdata = 0;
+/*
+ * Take the local apic timer and PIT/HPET into account. We don't
+ * know which one is active, when we have highres/dyntick on
+ */
+static inline unsigned int get_timer_irqs(int cpu)
+{
+#ifdef CONFIG_X86_64
+	return read_pda(apic_timer_irqs) + read_pda(irq0_irqs);
+#else
+	return per_cpu(irq_stat, cpu).apic_timer_irqs +
+		per_cpu(irq_stat, cpu).irq0_irqs;
+#endif
+}
 
 #ifdef CONFIG_SMP
-/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+/*
+ * The performance counters used by NMI_LOCAL_APIC don't trigger when
  * the CPU is idle. To make sure the NMI watchdog really ticks on all
  * CPUs during the test make them busy.
  */
 static __init void nmi_cpu_busy(void *data)
 {
 	local_irq_enable_in_hardirq();
-	/* Intentionally don't use cpu_relax here. This is
-	   to make sure that the performance counter really ticks,
-	   even if there is a simulator or similar that catches the
-	   pause instruction. On a real HT machine this is fine because
-	   all other CPUs are busy with "useless" delay loops and don't
-	   care if they get somewhat less cycles. */
+	/*
+	 * Intentionally don't use cpu_relax here. This is
+	 * to make sure that the performance counter really ticks,
+	 * even if there is a simulator or similar that catches the
+	 * pause instruction. On a real HT machine this is fine because
+	 * all other CPUs are busy with "useless" delay loops and don't
+	 * care if they get somewhat less cycles.
+	 */
 	while (endflag == 0)
 		mb();
 }
@@ -79,40 +116,37 @@ static __init void nmi_cpu_busy(void *data)
 
 int __init check_nmi_watchdog(void)
 {
-	int *prev_nmi_count;
+	unsigned int *prev_nmi_count;
 	int cpu;
 
-	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED))
-		return 0;
-
-	if (!atomic_read(&nmi_active))
+	if (!nmi_watchdog_active() || !atomic_read(&nmi_active))
 		return 0;
 
-	prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL);
 	if (!prev_nmi_count)
-		return -1;
+		goto error;
 
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
 #ifdef CONFIG_SMP
 	if (nmi_watchdog == NMI_LOCAL_APIC)
-		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
+		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
 #endif
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++)
-		prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count;
+	for_each_possible_cpu(cpu)
+		prev_nmi_count[cpu] = get_nmi_count(cpu);
 	local_irq_enable();
-	mdelay((20*1000)/nmi_hz); // wait 20 ticks
+	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
 
 	for_each_online_cpu(cpu) {
 		if (!per_cpu(wd_enabled, cpu))
 			continue;
-		if (cpu_pda(cpu)->__nmi_count - prev_nmi_count[cpu] <= 5) {
+		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
 			printk(KERN_WARNING "WARNING: CPU#%d: NMI "
-			       "appears to be stuck (%d->%d)!\n",
+				"appears to be stuck (%d->%d)!\n",
 				cpu,
 				prev_nmi_count[cpu],
-				cpu_pda(cpu)->__nmi_count);
+				get_nmi_count(cpu));
 			per_cpu(wd_enabled, cpu) = 0;
 			atomic_dec(&nmi_active);
 		}
@@ -121,24 +155,33 @@ int __init check_nmi_watchdog(void)
 	if (!atomic_read(&nmi_active)) {
 		kfree(prev_nmi_count);
 		atomic_set(&nmi_active, -1);
-		return -1;
+		goto error;
 	}
 	printk("OK.\n");
 
-	/* now that we know it works we can reduce NMI frequency to
-	   something more reasonable; makes a difference in some configs */
+	/*
+	 * now that we know it works we can reduce NMI frequency to
+	 * something more reasonable; makes a difference in some configs
+	 */
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		nmi_hz = lapic_adjust_nmi_hz(1);
 
 	kfree(prev_nmi_count);
 	return 0;
+error:
+	if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259)
+		disable_8259A_irq(0);
+#ifdef CONFIG_X86_32
+	timer_ack = 0;
+#endif
+	return -1;
 }
 
 static int __init setup_nmi_watchdog(char *str)
 {
-	int nmi;
+	unsigned int nmi;
 
-	if (!strncmp(str,"panic",5)) {
+	if (!strncmp(str, "panic", 5)) {
 		panic_on_timeout = 1;
 		str = strchr(str, ',');
 		if (!str)
@@ -148,15 +191,17 @@ static int __init setup_nmi_watchdog(char *str)
 
 	get_option(&str, &nmi);
 
-	if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
+	if (nmi >= NMI_INVALID)
 		return 0;
 
 	nmi_watchdog = nmi;
 	return 1;
 }
-
 __setup("nmi_watchdog=", setup_nmi_watchdog);
 
+/*
+ * Suspend/resume support
+ */
 #ifdef CONFIG_PM
 
 static int nmi_pm_active; /* nmi_active before suspend */
@@ -195,7 +240,8 @@ static int __init init_lapic_nmi_sysfs(void)
 {
 	int error;
 
-	/* should really be a BUG_ON but b/c this is an
+	/*
+	 * should really be a BUG_ON but b/c this is an
 	 * init call, it just doesn't work.  -dcz
 	 */
 	if (nmi_watchdog != NMI_LOCAL_APIC)
@@ -209,6 +255,7 @@ static int __init init_lapic_nmi_sysfs(void)
 		error = sysdev_register(&device_lapic_nmi);
 	return error;
 }
+
 /* must come after the local APIC's device_initcall() */
 late_initcall(init_lapic_nmi_sysfs);
 
@@ -225,7 +272,7 @@ static void __acpi_nmi_enable(void *__unused)
 void acpi_nmi_enable(void)
 {
 	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
+		on_each_cpu(__acpi_nmi_enable, NULL, 1);
 }
 
 static void __acpi_nmi_disable(void *__unused)
@@ -239,7 +286,7 @@ static void __acpi_nmi_disable(void *__unused)
 void acpi_nmi_disable(void)
 {
 	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
+		on_each_cpu(__acpi_nmi_disable, NULL, 1);
 }
 
 void setup_apic_nmi_watchdog(void *unused)
@@ -249,11 +296,12 @@ void setup_apic_nmi_watchdog(void *unused)
 
 	/* cheap hack to support suspend/resume */
 	/* if cpu0 is not active neither should the other cpus */
-	if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
+	if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
 		return;
 
 	switch (nmi_watchdog) {
 	case NMI_LOCAL_APIC:
+		 /* enable it before to avoid race with handler */
 		__get_cpu_var(wd_enabled) = 1;
 		if (lapic_watchdog_init(nmi_hz) < 0) {
 			__get_cpu_var(wd_enabled) = 0;
@@ -269,9 +317,8 @@ void setup_apic_nmi_watchdog(void *unused)
 void stop_apic_nmi_watchdog(void *unused)
 {
 	/* only support LOCAL and IO APICs for now */
-	if ((nmi_watchdog != NMI_LOCAL_APIC) &&
-	    (nmi_watchdog != NMI_IO_APIC))
-	    	return;
+	if (!nmi_watchdog_active())
+		return;
 	if (__get_cpu_var(wd_enabled) == 0)
 		return;
 	if (nmi_watchdog == NMI_LOCAL_APIC)
@@ -287,6 +334,11 @@ void stop_apic_nmi_watchdog(void *unused)
  *
  * as these watchdog NMI IRQs are generated on every CPU, we only
  * have to check the current processor.
+ *
+ * since NMIs don't listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up here too!]
  */
 
 static DEFINE_PER_CPU(unsigned, last_irq_sum);
@@ -295,11 +347,11 @@ static DEFINE_PER_CPU(int, nmi_touch);
 
 void touch_nmi_watchdog(void)
 {
-	if (nmi_watchdog > 0) {
+	if (nmi_watchdog_active()) {
 		unsigned cpu;
 
 		/*
- 		 * Tell other CPUs to reset their alert counters. We cannot
+		 * Tell other CPUs to reset their alert counters. We cannot
 		 * do it ourselves because the alert count increase is not
 		 * atomic.
 		 */
@@ -309,6 +361,9 @@ void touch_nmi_watchdog(void)
 		}
 	}
 
+	/*
+	 * Tickle the softlockup detector too:
+	 */
 	touch_softlockup_watchdog();
 }
 EXPORT_SYMBOL(touch_nmi_watchdog);
@@ -316,7 +371,12 @@ EXPORT_SYMBOL(touch_nmi_watchdog);
 notrace __kprobes int
 nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 {
-	int sum;
+	/*
+	 * Since current_thread_info()-> is always on the stack, and we
+	 * always switch the stack NMI-atomically, it's safe to use
+	 * smp_processor_id().
+	 */
+	unsigned int sum;
 	int touched = 0;
 	int cpu = smp_processor_id();
 	int rc = 0;
@@ -328,7 +388,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 		touched = 1;
 	}
 
-	sum = read_pda(apic_timer_irqs) + read_pda(irq0_irqs);
+	sum = get_timer_irqs(cpu);
+
 	if (__get_cpu_var(nmi_touch)) {
 		__get_cpu_var(nmi_touch) = 0;
 		touched = 1;
@@ -338,28 +399,29 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
 
 		spin_lock(&lock);
-		printk("NMI backtrace for cpu %d\n", cpu);
+		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
 		dump_stack();
 		spin_unlock(&lock);
 		cpu_clear(cpu, backtrace_mask);
 	}
 
-#ifdef CONFIG_X86_MCE
-	/* Could check oops_in_progress here too, but it's safer
-	   not too */
-	if (atomic_read(&mce_entry) > 0)
+	/* Could check oops_in_progress here too, but it's safer not to */
+	if (mce_in_progress())
 		touched = 1;
-#endif
-	/* if the apic timer isn't firing, this cpu isn't doing much */
+
+	/* if the none of the timers isn't firing, this cpu isn't doing much */
 	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
 		/*
 		 * Ayiee, looks like this CPU is stuck ...
 		 * wait a few IRQs (5 seconds) before doing the oops ...
 		 */
 		local_inc(&__get_cpu_var(alert_counter));
-		if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz)
-			die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs,
-				panic_on_timeout);
+		if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+			/*
+			 * die_nmi will return ONLY if NOTIFY_STOP happens..
+			 */
+			die_nmi("BUG: NMI Watchdog detected LOCKUP",
+				regs, panic_on_timeout);
 	} else {
 		__get_cpu_var(last_irq_sum) = sum;
 		local_set(&__get_cpu_var(alert_counter), 0);
@@ -373,7 +435,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 		rc |= lapic_wd_event(nmi_hz);
 		break;
 	case NMI_IO_APIC:
-		/* don't know how to accurately check for this.
+		/*
+		 * don't know how to accurately check for this.
 		 * just assume it was a watchdog timer interrupt
 		 * This matches the old behaviour.
 		 */
@@ -383,31 +446,14 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 	return rc;
 }
 
-static unsigned ignore_nmis;
-
-asmlinkage notrace __kprobes void
-do_nmi(struct pt_regs *regs, long error_code)
-{
-	nmi_enter();
-	add_pda(__nmi_count,1);
-	if (!ignore_nmis)
-		default_do_nmi(regs);
-	nmi_exit();
-}
-
-void stop_nmi(void)
-{
-	acpi_nmi_disable();
-	ignore_nmis++;
-}
+#ifdef CONFIG_SYSCTL
 
-void restart_nmi(void)
+static int __init setup_unknown_nmi_panic(char *str)
 {
-	ignore_nmis--;
-	acpi_nmi_enable();
+	unknown_nmi_panic = 1;
+	return 1;
 }
-
-#ifdef CONFIG_SYSCTL
+__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
 
 static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
 {
@@ -415,7 +461,7 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
 	char buf[64];
 
 	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
-	die_nmi(buf, regs, 1);	/* Always panic here */
+	die_nmi(buf, regs, 1); /* Always panic here */
 	return 0;
 }
 
@@ -433,28 +479,26 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
 	if (!!old_state == !!nmi_watchdog_enabled)
 		return 0;
 
-	if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
-		printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
+	if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) {
+		printk(KERN_WARNING
+			"NMI watchdog is permanently disabled\n");
 		return -EIO;
 	}
 
-	/* if nmi_watchdog is not set yet, then set it */
-	nmi_watchdog_default();
-
 	if (nmi_watchdog == NMI_LOCAL_APIC) {
 		if (nmi_watchdog_enabled)
 			enable_lapic_nmi_watchdog();
 		else
 			disable_lapic_nmi_watchdog();
 	} else {
-		printk( KERN_WARNING
+		printk(KERN_WARNING
 			"NMI watchdog doesn't know what hardware to touch\n");
 		return -EIO;
 	}
 	return 0;
 }
 
-#endif
+#endif /* CONFIG_SYSCTL */
 
 int do_nmi_callback(struct pt_regs *regs, int cpu)
 {
@@ -477,6 +521,3 @@ void __trigger_all_cpu_backtrace(void)
 		mdelay(1);
 	}
 }
-
-EXPORT_SYMBOL(nmi_active);
-EXPORT_SYMBOL(nmi_watchdog);
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
deleted file mode 100644
index 84160f74eeb0..000000000000
--- a/arch/x86/kernel/nmi_32.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- *  NMI watchdog support on APIC systems
- *
- *  Started by Ingo Molnar <mingo@redhat.com>
- *
- *  Fixes:
- *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
- *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
- *  Mikael Pettersson	: Pentium 4 support for local APIC NMI watchdog.
- *  Pavel Machek and
- *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
- */
-
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/nmi.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/percpu.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kernel_stat.h>
-#include <linux/kdebug.h>
-#include <linux/slab.h>
-
-#include <asm/smp.h>
-#include <asm/nmi.h>
-
-#include "mach_traps.h"
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- *     be enabled
- *  0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
-
-unsigned int nmi_watchdog = NMI_DEFAULT;
-static unsigned int nmi_hz = HZ;
-
-static DEFINE_PER_CPU(short, wd_enabled);
-
-static int endflag __initdata = 0;
-
-#ifdef CONFIG_SMP
-/* The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
-	local_irq_enable_in_hardirq();
-	/* Intentionally don't use cpu_relax here. This is
-	   to make sure that the performance counter really ticks,
-	   even if there is a simulator or similar that catches the
-	   pause instruction. On a real HT machine this is fine because
-	   all other CPUs are busy with "useless" delay loops and don't
-	   care if they get somewhat less cycles. */
-	while (endflag == 0)
-		mb();
-}
-#endif
-
-int __init check_nmi_watchdog(void)
-{
-	unsigned int *prev_nmi_count;
-	int cpu;
-
-	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED))
-		return 0;
-
-	if (!atomic_read(&nmi_active))
-		return 0;
-
-	prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
-	if (!prev_nmi_count)
-		return -1;
-
-	printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
-#endif
-
-	for_each_possible_cpu(cpu)
-		prev_nmi_count[cpu] = nmi_count(cpu);
-	local_irq_enable();
-	mdelay((20*1000)/nmi_hz); // wait 20 ticks
-
-	for_each_possible_cpu(cpu) {
-#ifdef CONFIG_SMP
-		/* Check cpu_callin_map here because that is set
-		   after the timer is started. */
-		if (!cpu_isset(cpu, cpu_callin_map))
-			continue;
-#endif
-		if (!per_cpu(wd_enabled, cpu))
-			continue;
-		if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
-			printk(KERN_WARNING "WARNING: CPU#%d: NMI "
-				"appears to be stuck (%d->%d)!\n",
-				cpu,
-				prev_nmi_count[cpu],
-				nmi_count(cpu));
-			per_cpu(wd_enabled, cpu) = 0;
-			atomic_dec(&nmi_active);
-		}
-	}
-	endflag = 1;
-	if (!atomic_read(&nmi_active)) {
-		kfree(prev_nmi_count);
-		atomic_set(&nmi_active, -1);
-		return -1;
-	}
-	printk("OK.\n");
-
-	/* now that we know it works we can reduce NMI frequency to
-	   something more reasonable; makes a difference in some configs */
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		nmi_hz = lapic_adjust_nmi_hz(1);
-
-	kfree(prev_nmi_count);
-	return 0;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
-	int nmi;
-
-	get_option(&str, &nmi);
-
-	if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
-		return 0;
-
-	nmi_watchdog = nmi;
-	return 1;
-}
-
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-
-/* Suspend/resume support */
-
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	nmi_pm_active = atomic_read(&nmi_active);
-	stop_apic_nmi_watchdog(NULL);
-	BUG_ON(atomic_read(&nmi_active) != 0);
-	return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	if (nmi_pm_active > 0) {
-		setup_apic_nmi_watchdog(NULL);
-		touch_nmi_watchdog();
-	}
-	return 0;
-}
-
-
-static struct sysdev_class nmi_sysclass = {
-	.name		= "lapic_nmi",
-	.resume		= lapic_nmi_resume,
-	.suspend	= lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
-	.id	= 0,
-	.cls	= &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
-	int error;
-
-	/* should really be a BUG_ON but b/c this is an
-	 * init call, it just doesn't work.  -dcz
-	 */
-	if (nmi_watchdog != NMI_LOCAL_APIC)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0)
-		return 0;
-
-	error = sysdev_class_register(&nmi_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic_nmi);
-	return error;
-}
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif	/* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
-	apic_write_around(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
-	if (__get_cpu_var(wd_enabled))
-		return;
-
-	/* cheap hack to support suspend/resume */
-	/* if cpu0 is not active neither should the other cpus */
-	if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
-		return;
-
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		__get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */
-		if (lapic_watchdog_init(nmi_hz) < 0) {
-			__get_cpu_var(wd_enabled) = 0;
-			return;
-		}
-		/* FALL THROUGH */
-	case NMI_IO_APIC:
-		__get_cpu_var(wd_enabled) = 1;
-		atomic_inc(&nmi_active);
-	}
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
-	/* only support LOCAL and IO APICs for now */
-	if ((nmi_watchdog != NMI_LOCAL_APIC) &&
-	    (nmi_watchdog != NMI_IO_APIC))
-	    	return;
-	if (__get_cpu_var(wd_enabled) == 0)
-		return;
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		lapic_watchdog_stop();
-	__get_cpu_var(wd_enabled) = 0;
-	atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up
- *  here too!]
- */
-
-static unsigned int
-	last_irq_sums [NR_CPUS],
-	alert_counter [NR_CPUS];
-
-void touch_nmi_watchdog(void)
-{
-	if (nmi_watchdog > 0) {
-		unsigned cpu;
-
-		/*
-		 * Just reset the alert counters, (other CPUs might be
-		 * spinning on locks we hold):
-		 */
-		for_each_present_cpu(cpu) {
-			if (alert_counter[cpu])
-				alert_counter[cpu] = 0;
-		}
-	}
-
-	/*
-	 * Tickle the softlockup detector too:
-	 */
-	touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-extern void die_nmi(struct pt_regs *, const char *msg);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
-
-	/*
-	 * Since current_thread_info()-> is always on the stack, and we
-	 * always switch the stack NMI-atomically, it's safe to use
-	 * smp_processor_id().
-	 */
-	unsigned int sum;
-	int touched = 0;
-	int cpu = smp_processor_id();
-	int rc = 0;
-
-	/* check for other users first */
-	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
-			== NOTIFY_STOP) {
-		rc = 1;
-		touched = 1;
-	}
-
-	if (cpu_isset(cpu, backtrace_mask)) {
-		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
-
-		spin_lock(&lock);
-		printk("NMI backtrace for cpu %d\n", cpu);
-		dump_stack();
-		spin_unlock(&lock);
-		cpu_clear(cpu, backtrace_mask);
-	}
-
-	/*
-	 * Take the local apic timer and PIT/HPET into account. We don't
-	 * know which one is active, when we have highres/dyntick on
-	 */
-	sum = per_cpu(irq_stat, cpu).apic_timer_irqs +
-		per_cpu(irq_stat, cpu).irq0_irqs;
-
-	/* if the none of the timers isn't firing, this cpu isn't doing much */
-	if (!touched && last_irq_sums[cpu] == sum) {
-		/*
-		 * Ayiee, looks like this CPU is stuck ...
-		 * wait a few IRQs (5 seconds) before doing the oops ...
-		 */
-		alert_counter[cpu]++;
-		if (alert_counter[cpu] == 5*nmi_hz)
-			/*
-			 * die_nmi will return ONLY if NOTIFY_STOP happens..
-			 */
-			die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP");
-	} else {
-		last_irq_sums[cpu] = sum;
-		alert_counter[cpu] = 0;
-	}
-	/* see if the nmi watchdog went off */
-	if (!__get_cpu_var(wd_enabled))
-		return rc;
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		rc |= lapic_wd_event(nmi_hz);
-		break;
-	case NMI_IO_APIC:
-		/* don't know how to accurately check for this.
-		 * just assume it was a watchdog timer interrupt
-		 * This matches the old behaviour.
-		 */
-		rc = 1;
-		break;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYSCTL
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
-	unsigned char reason = get_nmi_reason();
-	char buf[64];
-
-	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
-	die_nmi(regs, buf);
-	return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
-			void __user *buffer, size_t *length, loff_t *ppos)
-{
-	int old_state;
-
-	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
-	old_state = nmi_watchdog_enabled;
-	proc_dointvec(table, write, file, buffer, length, ppos);
-	if (!!old_state == !!nmi_watchdog_enabled)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
-		printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
-		return -EIO;
-	}
-
-	if (nmi_watchdog == NMI_DEFAULT) {
-		if (lapic_watchdog_ok())
-			nmi_watchdog = NMI_LOCAL_APIC;
-		else
-			nmi_watchdog = NMI_IO_APIC;
-	}
-
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_lapic_nmi_watchdog();
-		else
-			disable_lapic_nmi_watchdog();
-	} else {
-		printk( KERN_WARNING
-			"NMI watchdog doesn't know what hardware to touch\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-#endif
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
-	if (unknown_nmi_panic)
-		return unknown_nmi_panic_callback(regs, cpu);
-#endif
-	return 0;
-}
-
-void __trigger_all_cpu_backtrace(void)
-{
-	int i;
-
-	backtrace_mask = cpu_online_map;
-	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
-	for (i = 0; i < 10 * 1000; i++) {
-		if (cpus_empty(backtrace_mask))
-			break;
-		mdelay(1);
-	}
-}
-
-EXPORT_SYMBOL(nmi_active);
-EXPORT_SYMBOL(nmi_watchdog);
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index e65281b1634b..b8c45610b20a 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -31,6 +31,9 @@
 #include <asm/numaq.h>
 #include <asm/topology.h>
 #include <asm/processor.h>
+#include <asm/mpspec.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
@@ -58,6 +61,8 @@ static void __init smp_dump_qct(void)
 			node_end_pfn[node] = MB_TO_PAGES(
 				eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
 
+			e820_register_active_regions(node, node_start_pfn[node],
+							node_end_pfn[node]);
 			memory_present(node,
 				node_start_pfn[node], node_end_pfn[node]);
 			node_remap_size[node] = node_memmap_size_bytes(node,
@@ -67,23 +72,209 @@ static void __init smp_dump_qct(void)
 	}
 }
 
-/*
- * Unlike Summit, we don't really care to let the NUMA-Q
- * fall back to flat mode.  Don't compile for NUMA-Q
- * unless you really need it!
- */
-int __init get_memcfg_numaq(void)
-{
-	smp_dump_qct();
-	return 1;
-}
 
-static int __init numaq_tsc_disable(void)
+void __init numaq_tsc_disable(void)
 {
+	if (!found_numaq)
+		return;
+
 	if (num_online_nodes() > 1) {
 		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
 		setup_clear_cpu_cap(X86_FEATURE_TSC);
 	}
+}
+
+static int __init numaq_pre_time_init(void)
+{
+	numaq_tsc_disable();
 	return 0;
 }
-arch_initcall(numaq_tsc_disable);
+
+int found_numaq;
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+struct mpc_config_translation {
+	unsigned char mpc_type;
+	unsigned char trans_len;
+	unsigned char trans_type;
+	unsigned char trans_quad;
+	unsigned char trans_global;
+	unsigned char trans_local;
+	unsigned short trans_reserved;
+};
+
+/* x86_quirks member */
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
+    __cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+/* x86_quirks member */
+static int mpc_apic_id(struct mpc_config_processor *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+	printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+	       m->mpc_apicid,
+	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	       m->mpc_apicver, quad, logical_apicid);
+	return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+/* x86_quirks member */
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	mp_bus_id_to_node[m->mpc_busid] = quad;
+	mp_bus_id_to_local[m->mpc_busid] = local;
+	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+	       m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+
+/* x86_quirks member */
+static void mpc_oem_pci_bus(struct mpc_config_bus *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
+static void __init MP_translation_info(struct mpc_config_translation *m)
+{
+	printk(KERN_INFO
+	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+	       m->trans_local);
+
+	if (mpc_record >= MAX_MPC_ENTRY)
+		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+	else
+		translation_table[mpc_record] = m;	/* stash this for later */
+	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+		node_set_online(m->trans_quad);
+}
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+	int sum = 0;
+
+	while (len--)
+		sum += *mp++;
+
+	return sum & 0xFF;
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
+				    unsigned short oemsize)
+{
+	int count = sizeof(*oemtable);	/* the header size */
+	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
+	mpc_record = 0;
+	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
+	       oemtable);
+	if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
+		printk(KERN_WARNING
+		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+		       oemtable->oem_signature[0], oemtable->oem_signature[1],
+		       oemtable->oem_signature[2], oemtable->oem_signature[3]);
+		return;
+	}
+	if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
+		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+		return;
+	}
+	while (count < oemtable->oem_length) {
+		switch (*oemptr) {
+		case MP_TRANSLATION:
+			{
+				struct mpc_config_translation *m =
+				    (struct mpc_config_translation *)oemptr;
+				MP_translation_info(m);
+				oemptr += sizeof(*m);
+				count += sizeof(*m);
+				++mpc_record;
+				break;
+			}
+		default:
+			{
+				printk(KERN_WARNING
+				       "Unrecognised OEM table entry type! - %d\n",
+				       (int)*oemptr);
+				return;
+			}
+		}
+	}
+}
+
+static struct x86_quirks numaq_x86_quirks __initdata = {
+	.arch_pre_time_init	= numaq_pre_time_init,
+	.arch_time_init		= NULL,
+	.arch_pre_intr_init	= NULL,
+	.arch_memory_setup	= NULL,
+	.arch_intr_init		= NULL,
+	.arch_trap_init		= NULL,
+	.mach_get_smp_config	= NULL,
+	.mach_find_smp_config	= NULL,
+	.mpc_record		= &mpc_record,
+	.mpc_apic_id		= mpc_apic_id,
+	.mpc_oem_bus_info	= mpc_oem_bus_info,
+	.mpc_oem_pci_bus	= mpc_oem_pci_bus,
+	.smp_read_mpc_oem	= smp_read_mpc_oem,
+};
+
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				 char *productid)
+{
+	if (strncmp(oem, "IBM NUMA", 8))
+		printk("Warning!  Not a NUMA-Q system!\n");
+	else
+		found_numaq = 1;
+}
+
+static __init void early_check_numaq(void)
+{
+	/*
+	 * Find possible boot-time SMP configuration:
+	 */
+	early_find_smp_config();
+	/*
+	 * get boot-time SMP configuration:
+	 */
+	if (smp_found_config)
+		early_get_smp_config();
+
+	if (found_numaq)
+		x86_quirks = &numaq_x86_quirks;
+}
+
+int __init get_memcfg_numaq(void)
+{
+	early_check_numaq();
+	if (!found_numaq)
+		return 0;
+	smp_dump_qct();
+	return 1;
+}
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 74f0c5ea2a03..94da4d52d798 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -29,7 +29,9 @@
 #include <asm/desc.h>
 #include <asm/setup.h>
 #include <asm/arch_hooks.h>
+#include <asm/pgtable.h>
 #include <asm/time.h>
+#include <asm/pgalloc.h>
 #include <asm/irq.h>
 #include <asm/delay.h>
 #include <asm/fixmap.h>
@@ -122,6 +124,7 @@ static void *get_call_destination(u8 type)
 		.pv_irq_ops = pv_irq_ops,
 		.pv_apic_ops = pv_apic_ops,
 		.pv_mmu_ops = pv_mmu_ops,
+		.pv_lock_ops = pv_lock_ops,
 	};
 	return *((void **)&tmpl + type);
 }
@@ -139,7 +142,9 @@ unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
 		/* If the operation is a nop, then nop the callsite */
 		ret = paravirt_patch_nop();
 	else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
-		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret))
+		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit) ||
+		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret32) ||
+		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret64))
 		/* If operation requires a jmp, then jmp */
 		ret = paravirt_patch_jmp(insnbuf, opfunc, addr, len);
 	else
@@ -190,7 +195,9 @@ static void native_flush_tlb_single(unsigned long addr)
 
 /* These are in entry.S */
 extern void native_iret(void);
-extern void native_irq_enable_syscall_ret(void);
+extern void native_irq_enable_sysexit(void);
+extern void native_usergs_sysret32(void);
+extern void native_usergs_sysret64(void);
 
 static int __init print_banner(void)
 {
@@ -261,6 +268,17 @@ enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
 	return __get_cpu_var(paravirt_lazy_mode);
 }
 
+void __init paravirt_use_bytelocks(void)
+{
+#ifdef CONFIG_SMP
+	pv_lock_ops.spin_is_locked = __byte_spin_is_locked;
+	pv_lock_ops.spin_is_contended = __byte_spin_is_contended;
+	pv_lock_ops.spin_lock = __byte_spin_lock;
+	pv_lock_ops.spin_trylock = __byte_spin_trylock;
+	pv_lock_ops.spin_unlock = __byte_spin_unlock;
+#endif
+}
+
 struct pv_info pv_info = {
 	.name = "bare hardware",
 	.paravirt_enabled = 0,
@@ -280,7 +298,7 @@ struct pv_time_ops pv_time_ops = {
 	.get_wallclock = native_get_wallclock,
 	.set_wallclock = native_set_wallclock,
 	.sched_clock = native_sched_clock,
-	.get_cpu_khz = native_calculate_cpu_khz,
+	.get_tsc_khz = native_calibrate_tsc,
 };
 
 struct pv_irq_ops pv_irq_ops = {
@@ -291,6 +309,9 @@ struct pv_irq_ops pv_irq_ops = {
 	.irq_enable = native_irq_enable,
 	.safe_halt = native_safe_halt,
 	.halt = native_halt,
+#ifdef CONFIG_X86_64
+	.adjust_exception_frame = paravirt_nop,
+#endif
 };
 
 struct pv_cpu_ops pv_cpu_ops = {
@@ -321,12 +342,23 @@ struct pv_cpu_ops pv_cpu_ops = {
 	.store_idt = native_store_idt,
 	.store_tr = native_store_tr,
 	.load_tls = native_load_tls,
+#ifdef CONFIG_X86_64
+	.load_gs_index = native_load_gs_index,
+#endif
 	.write_ldt_entry = native_write_ldt_entry,
 	.write_gdt_entry = native_write_gdt_entry,
 	.write_idt_entry = native_write_idt_entry,
 	.load_sp0 = native_load_sp0,
 
-	.irq_enable_syscall_ret = native_irq_enable_syscall_ret,
+#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
+	.irq_enable_sysexit = native_irq_enable_sysexit,
+#endif
+#ifdef CONFIG_X86_64
+#ifdef CONFIG_IA32_EMULATION
+	.usergs_sysret32 = native_usergs_sysret32,
+#endif
+	.usergs_sysret64 = native_usergs_sysret64,
+#endif
 	.iret = native_iret,
 	.swapgs = native_swapgs,
 
@@ -342,7 +374,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 struct pv_apic_ops pv_apic_ops = {
 #ifdef CONFIG_X86_LOCAL_APIC
 	.apic_write = native_apic_write,
-	.apic_write_atomic = native_apic_write_atomic,
 	.apic_read = native_apic_read,
 	.setup_boot_clock = setup_boot_APIC_clock,
 	.setup_secondary_clock = setup_secondary_APIC_clock,
@@ -354,6 +385,9 @@ struct pv_mmu_ops pv_mmu_ops = {
 #ifndef CONFIG_X86_64
 	.pagetable_setup_start = native_pagetable_setup_start,
 	.pagetable_setup_done = native_pagetable_setup_done,
+#else
+	.pagetable_setup_start = paravirt_nop,
+	.pagetable_setup_done = paravirt_nop,
 #endif
 
 	.read_cr2 = native_read_cr2,
@@ -366,6 +400,9 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.flush_tlb_single = native_flush_tlb_single,
 	.flush_tlb_others = native_flush_tlb_others,
 
+	.pgd_alloc = __paravirt_pgd_alloc,
+	.pgd_free = paravirt_nop,
+
 	.alloc_pte = paravirt_nop,
 	.alloc_pmd = paravirt_nop,
 	.alloc_pmd_clone = paravirt_nop,
@@ -380,6 +417,9 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.pte_update = paravirt_nop,
 	.pte_update_defer = paravirt_nop,
 
+	.ptep_modify_prot_start = __ptep_modify_prot_start,
+	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
+
 #ifdef CONFIG_HIGHPTE
 	.kmap_atomic_pte = kmap_atomic,
 #endif
@@ -403,6 +443,7 @@ struct pv_mmu_ops pv_mmu_ops = {
 #endif /* PAGETABLE_LEVELS >= 3 */
 
 	.pte_val = native_pte_val,
+	.pte_flags = native_pte_flags,
 	.pgd_val = native_pgd_val,
 
 	.make_pte = native_make_pte,
@@ -416,7 +457,21 @@ struct pv_mmu_ops pv_mmu_ops = {
 		.enter = paravirt_nop,
 		.leave = paravirt_nop,
 	},
+
+	.set_fixmap = native_set_fixmap,
+};
+
+struct pv_lock_ops pv_lock_ops = {
+#ifdef CONFIG_SMP
+	.spin_is_locked = __ticket_spin_is_locked,
+	.spin_is_contended = __ticket_spin_is_contended,
+
+	.spin_lock = __ticket_spin_lock,
+	.spin_trylock = __ticket_spin_trylock,
+	.spin_unlock = __ticket_spin_unlock,
+#endif
 };
+EXPORT_SYMBOL_GPL(pv_lock_ops);
 
 EXPORT_SYMBOL_GPL(pv_time_ops);
 EXPORT_SYMBOL    (pv_cpu_ops);
diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
index 82fc5fcab4f4..58262218781b 100644
--- a/arch/x86/kernel/paravirt_patch_32.c
+++ b/arch/x86/kernel/paravirt_patch_32.c
@@ -5,7 +5,7 @@ DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
 DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
 DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
 DEF_NATIVE(pv_cpu_ops, iret, "iret");
-DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit");
+DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "sti; sysexit");
 DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
 DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
 DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
@@ -29,7 +29,7 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_irq_ops, restore_fl);
 		PATCH_SITE(pv_irq_ops, save_fl);
 		PATCH_SITE(pv_cpu_ops, iret);
-		PATCH_SITE(pv_cpu_ops, irq_enable_syscall_ret);
+		PATCH_SITE(pv_cpu_ops, irq_enable_sysexit);
 		PATCH_SITE(pv_mmu_ops, read_cr2);
 		PATCH_SITE(pv_mmu_ops, read_cr3);
 		PATCH_SITE(pv_mmu_ops, write_cr3);
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
index 7d904e138d7e..061d01df9ae6 100644
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -14,8 +14,9 @@ DEF_NATIVE(pv_mmu_ops, flush_tlb_single, "invlpg (%rdi)");
 DEF_NATIVE(pv_cpu_ops, clts, "clts");
 DEF_NATIVE(pv_cpu_ops, wbinvd, "wbinvd");
 
-/* the three commands give us more control to how to return from a syscall */
-DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "movq %gs:" __stringify(pda_oldrsp) ", %rsp; swapgs; sysretq;");
+DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "swapgs; sti; sysexit");
+DEF_NATIVE(pv_cpu_ops, usergs_sysret64, "swapgs; sysretq");
+DEF_NATIVE(pv_cpu_ops, usergs_sysret32, "swapgs; sysretl");
 DEF_NATIVE(pv_cpu_ops, swapgs, "swapgs");
 
 unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
@@ -35,7 +36,9 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_irq_ops, irq_enable);
 		PATCH_SITE(pv_irq_ops, irq_disable);
 		PATCH_SITE(pv_cpu_ops, iret);
-		PATCH_SITE(pv_cpu_ops, irq_enable_syscall_ret);
+		PATCH_SITE(pv_cpu_ops, irq_enable_sysexit);
+		PATCH_SITE(pv_cpu_ops, usergs_sysret32);
+		PATCH_SITE(pv_cpu_ops, usergs_sysret64);
 		PATCH_SITE(pv_cpu_ops, swapgs);
 		PATCH_SITE(pv_mmu_ops, read_cr2);
 		PATCH_SITE(pv_mmu_ops, read_cr3);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index e28ec497e142..b67a4b1d4eae 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -29,6 +29,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/crash_dump.h>
 #include <linux/dma-mapping.h>
 #include <linux/bitops.h>
 #include <linux/pci_ids.h>
@@ -36,7 +37,8 @@
 #include <linux/delay.h>
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
-#include <asm/gart.h>
+
+#include <asm/iommu.h>
 #include <asm/calgary.h>
 #include <asm/tce.h>
 #include <asm/pci-direct.h>
@@ -167,6 +169,8 @@ static void calgary_dump_error_regs(struct iommu_table *tbl);
 static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
 static void calioc2_tce_cache_blast(struct iommu_table *tbl);
 static void calioc2_dump_error_regs(struct iommu_table *tbl);
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl);
+static void get_tce_space_from_tar(void);
 
 static struct cal_chipset_ops calgary_chip_ops = {
 	.handle_quirks = calgary_handle_quirks,
@@ -410,22 +414,6 @@ static void calgary_unmap_sg(struct device *dev,
 	}
 }
 
-static int calgary_nontranslate_map_sg(struct device* dev,
-	struct scatterlist *sg, int nelems, int direction)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nelems, i) {
-		struct page *p = sg_page(s);
-
-		BUG_ON(!p);
-		s->dma_address = virt_to_bus(sg_virt(s));
-		s->dma_length = s->length;
-	}
-	return nelems;
-}
-
 static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	int nelems, int direction)
 {
@@ -436,9 +424,6 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	unsigned long entry;
 	int i;
 
-	if (!translation_enabled(tbl))
-		return calgary_nontranslate_map_sg(dev, sg, nelems, direction);
-
 	for_each_sg(sg, s, nelems, i) {
 		BUG_ON(!sg_page(s));
 
@@ -474,7 +459,6 @@ error:
 static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	size_t size, int direction)
 {
-	dma_addr_t dma_handle = bad_dma_address;
 	void *vaddr = phys_to_virt(paddr);
 	unsigned long uaddr;
 	unsigned int npages;
@@ -483,12 +467,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	uaddr = (unsigned long)vaddr;
 	npages = num_dma_pages(uaddr, size);
 
-	if (translation_enabled(tbl))
-		dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction);
-	else
-		dma_handle = virt_to_bus(vaddr);
-
-	return dma_handle;
+	return iommu_alloc(dev, tbl, vaddr, npages, direction);
 }
 
 static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
@@ -497,9 +476,6 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
 	struct iommu_table *tbl = find_iommu_table(dev);
 	unsigned int npages;
 
-	if (!translation_enabled(tbl))
-		return;
-
 	npages = num_dma_pages(dma_handle, size);
 	iommu_free(tbl, dma_handle, npages);
 }
@@ -522,18 +498,12 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size,
 		goto error;
 	memset(ret, 0, size);
 
-	if (translation_enabled(tbl)) {
-		/* set up tces to cover the allocated range */
-		mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
-		if (mapping == bad_dma_address)
-			goto free;
-
-		*dma_handle = mapping;
-	} else /* non translated slot */
-		*dma_handle = virt_to_bus(ret);
-
+	/* set up tces to cover the allocated range */
+	mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
+	if (mapping == bad_dma_address)
+		goto free;
+	*dma_handle = mapping;
 	return ret;
-
 free:
 	free_pages((unsigned long)ret, get_order(size));
 	ret = NULL;
@@ -541,7 +511,7 @@ error:
 	return ret;
 }
 
-static const struct dma_mapping_ops calgary_dma_ops = {
+static struct dma_mapping_ops calgary_dma_ops = {
 	.alloc_coherent = calgary_alloc_coherent,
 	.map_single = calgary_map_single,
 	.unmap_single = calgary_unmap_single,
@@ -830,7 +800,11 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)
 
 	tbl = pci_iommu(dev->bus);
 	tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
-	tce_free(tbl, 0, tbl->it_size);
+
+	if (is_kdump_kernel())
+		calgary_init_bitmap_from_tce_table(tbl);
+	else
+		tce_free(tbl, 0, tbl->it_size);
 
 	if (is_calgary(dev->device))
 		tbl->chip_ops = &calgary_chip_ops;
@@ -1209,6 +1183,10 @@ static int __init calgary_init(void)
 	if (ret)
 		return ret;
 
+	/* Purely for kdump kernel case */
+	if (is_kdump_kernel())
+		get_tce_space_from_tar();
+
 	do {
 		dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev);
 		if (!dev)
@@ -1230,6 +1208,16 @@ static int __init calgary_init(void)
 			goto error;
 	} while (1);
 
+	dev = NULL;
+	for_each_pci_dev(dev) {
+		struct iommu_table *tbl;
+
+		tbl = find_iommu_table(&dev->dev);
+
+		if (translation_enabled(tbl))
+			dev->dev.archdata.dma_ops = &calgary_dma_ops;
+	}
+
 	return ret;
 
 error:
@@ -1251,6 +1239,7 @@ error:
 		calgary_disable_translation(dev);
 		calgary_free_bus(dev);
 		pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */
+		dev->dev.archdata.dma_ops = NULL;
 	} while (1);
 
 	return ret;
@@ -1339,6 +1328,61 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev)
 	return (val != 0xffffffff);
 }
 
+/*
+ * calgary_init_bitmap_from_tce_table():
+ * Funtion for kdump case. In the second/kdump kernel initialize
+ * the bitmap based on the tce table entries obtained from first kernel
+ */
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
+{
+	u64 *tp;
+	unsigned int index;
+	tp = ((u64 *)tbl->it_base);
+	for (index = 0 ; index < tbl->it_size; index++) {
+		if (*tp != 0x0)
+			set_bit(index, tbl->it_map);
+		tp++;
+	}
+}
+
+/*
+ * get_tce_space_from_tar():
+ * Function for kdump case. Get the tce tables from first kernel
+ * by reading the contents of the base adress register of calgary iommu
+ */
+static void get_tce_space_from_tar()
+{
+	int bus;
+	void __iomem *target;
+	unsigned long tce_space;
+
+	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
+		struct calgary_bus_info *info = &bus_info[bus];
+		unsigned short pci_device;
+		u32 val;
+
+		val = read_pci_config(bus, 0, 0, 0);
+		pci_device = (val & 0xFFFF0000) >> 16;
+
+		if (!is_cal_pci_dev(pci_device))
+			continue;
+		if (info->translation_disabled)
+			continue;
+
+		if (calgary_bus_has_devices(bus, pci_device) ||
+						translate_empty_slots) {
+			target = calgary_reg(bus_info[bus].bbar,
+						tar_offset(bus));
+			tce_space = be64_to_cpu(readq(target));
+			tce_space = tce_space & TAR_SW_BITS;
+
+			tce_space = tce_space & (~specified_table_size);
+			info->tce_space = (u64 *)__va(tce_space);
+		}
+	}
+	return;
+}
+
 void __init detect_calgary(void)
 {
 	int bus;
@@ -1394,7 +1438,8 @@ void __init detect_calgary(void)
 		return;
 	}
 
-	specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE);
+	specified_table_size = determine_tce_table_size((is_kdump_kernel() ?
+					saved_max_pfn : max_pfn) * PAGE_SIZE);
 
 	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
 		struct calgary_bus_info *info = &bus_info[bus];
@@ -1412,10 +1457,16 @@ void __init detect_calgary(void)
 
 		if (calgary_bus_has_devices(bus, pci_device) ||
 		    translate_empty_slots) {
-			tbl = alloc_tce_table();
-			if (!tbl)
-				goto cleanup;
-			info->tce_space = tbl;
+			/*
+			 * If it is kdump kernel, find and use tce tables
+			 * from first kernel, else allocate tce tables here
+			 */
+			if (!is_kdump_kernel()) {
+				tbl = alloc_tce_table();
+				if (!tbl)
+					goto cleanup;
+				info->tce_space = tbl;
+			}
 			calgary_found = 1;
 		}
 	}
@@ -1430,6 +1481,10 @@ void __init detect_calgary(void)
 		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
 		       "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
 		       debugging ? "enabled" : "disabled");
+
+		/* swiotlb for devices that aren't behind the Calgary. */
+		if (max_pfn > MAX_DMA32_PFN)
+			swiotlb = 1;
 	}
 	return;
 
@@ -1446,7 +1501,7 @@ int __init calgary_iommu_init(void)
 {
 	int ret;
 
-	if (no_iommu || swiotlb)
+	if (no_iommu || (swiotlb && !calgary_detected))
 		return -ENODEV;
 
 	if (!calgary_detected)
@@ -1459,15 +1514,14 @@ int __init calgary_iommu_init(void)
 	if (ret) {
 		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
 		       "falling back to no_iommu\n", ret);
-		if (end_pfn > MAX_DMA32_PFN)
-			printk(KERN_ERR "WARNING more than 4GB of memory, "
-					"32bit PCI may malfunction.\n");
 		return ret;
 	}
 
 	force_iommu = 1;
 	bad_dma_address = 0x0;
-	dma_ops = &calgary_dma_ops;
+	/* dma_ops is set to swiotlb or nommu */
+	if (!dma_ops)
+		dma_ops = &nommu_dma_ops;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index dc00a1331ace..37544123896d 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -5,13 +5,13 @@
 
 #include <asm/proto.h>
 #include <asm/dma.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/calgary.h>
+#include <asm/amd_iommu.h>
 
-int forbid_dac __read_mostly;
-EXPORT_SYMBOL(forbid_dac);
+static int forbid_dac __read_mostly;
 
-const struct dma_mapping_ops *dma_ops;
+struct dma_mapping_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 static int iommu_sac_force __read_mostly;
@@ -74,13 +74,17 @@ early_param("dma32_size", parse_dma32_size_opt);
 void __init dma32_reserve_bootmem(void)
 {
 	unsigned long size, align;
-	if (end_pfn <= MAX_DMA32_PFN)
+	if (max_pfn <= MAX_DMA32_PFN)
 		return;
 
+	/*
+	 * check aperture_64.c allocate_aperture() for reason about
+	 * using 512M as goal
+	 */
 	align = 64ULL<<20;
 	size = round_up(dma32_bootmem_size, align);
 	dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
-				 __pa(MAX_DMA_ADDRESS));
+				 512ULL<<20);
 	if (dma32_bootmem_ptr)
 		dma32_bootmem_size = size;
 	else
@@ -88,17 +92,14 @@ void __init dma32_reserve_bootmem(void)
 }
 static void __init dma32_free_bootmem(void)
 {
-	int node;
 
-	if (end_pfn <= MAX_DMA32_PFN)
+	if (max_pfn <= MAX_DMA32_PFN)
 		return;
 
 	if (!dma32_bootmem_ptr)
 		return;
 
-	for_each_online_node(node)
-		free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr),
-				  dma32_bootmem_size);
+	free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size);
 
 	dma32_bootmem_ptr = NULL;
 	dma32_bootmem_size = 0;
@@ -112,19 +113,15 @@ void __init pci_iommu_alloc(void)
 	 * The order of these functions is important for
 	 * fall-back/fail-over reasons
 	 */
-#ifdef CONFIG_GART_IOMMU
 	gart_iommu_hole_init();
-#endif
 
-#ifdef CONFIG_CALGARY_IOMMU
 	detect_calgary();
-#endif
 
 	detect_intel_iommu();
 
-#ifdef CONFIG_SWIOTLB
+	amd_iommu_detect();
+
 	pci_swiotlb_init();
-#endif
 }
 #endif
 
@@ -180,9 +177,7 @@ static __init int iommu_setup(char *p)
 			swiotlb = 1;
 #endif
 
-#ifdef CONFIG_GART_IOMMU
 		gart_parse_options(p);
-#endif
 
 #ifdef CONFIG_CALGARY_IOMMU
 		if (!strncmp(p, "calgary", 7))
@@ -317,16 +312,17 @@ static int dma_release_coherent(struct device *dev, int order, void *vaddr)
 
 int dma_supported(struct device *dev, u64 mask)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 #ifdef CONFIG_PCI
 	if (mask > 0xffffffff && forbid_dac > 0) {
-		printk(KERN_INFO "PCI: Disallowing DAC for device %s\n",
-				 dev->bus_id);
+		dev_info(dev, "PCI: Disallowing DAC for device\n");
 		return 0;
 	}
 #endif
 
-	if (dma_ops->dma_supported)
-		return dma_ops->dma_supported(dev, mask);
+	if (ops->dma_supported)
+		return ops->dma_supported(dev, mask);
 
 	/* Copied from i386. Doesn't make much sense, because it will
 	   only work for pci_alloc_coherent.
@@ -347,8 +343,7 @@ int dma_supported(struct device *dev, u64 mask)
 	   type. Normally this doesn't make any difference, but gives
 	   more gentle handling of IOMMU overflow. */
 	if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
-		printk(KERN_INFO "%s: Force SAC with mask %Lx\n",
-				 dev->bus_id, mask);
+		dev_info(dev, "Force SAC with mask %Lx\n", mask);
 		return 0;
 	}
 
@@ -357,7 +352,7 @@ int dma_supported(struct device *dev, u64 mask)
 EXPORT_SYMBOL(dma_supported);
 
 /* Allocate DMA memory on node near device */
-noinline struct page *
+static noinline struct page *
 dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
 {
 	int node;
@@ -374,6 +369,7 @@ void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		   gfp_t gfp)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
 	void *memory = NULL;
 	struct page *page;
 	unsigned long dma_mask = 0;
@@ -442,8 +438,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 			/* Let low level make its own zone decisions */
 			gfp &= ~(GFP_DMA32|GFP_DMA);
 
-			if (dma_ops->alloc_coherent)
-				return dma_ops->alloc_coherent(dev, size,
+			if (ops->alloc_coherent)
+				return ops->alloc_coherent(dev, size,
 							   dma_handle, gfp);
 			return NULL;
 		}
@@ -455,14 +451,14 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		}
 	}
 
-	if (dma_ops->alloc_coherent) {
+	if (ops->alloc_coherent) {
 		free_pages((unsigned long)memory, get_order(size));
 		gfp &= ~(GFP_DMA|GFP_DMA32);
-		return dma_ops->alloc_coherent(dev, size, dma_handle, gfp);
+		return ops->alloc_coherent(dev, size, dma_handle, gfp);
 	}
 
-	if (dma_ops->map_simple) {
-		*dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory),
+	if (ops->map_simple) {
+		*dma_handle = ops->map_simple(dev, virt_to_phys(memory),
 					      size,
 					      PCI_DMA_BIDIRECTIONAL);
 		if (*dma_handle != bad_dma_address)
@@ -484,27 +480,27 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t bus)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	int order = get_order(size);
 	WARN_ON(irqs_disabled());	/* for portability */
 	if (dma_release_coherent(dev, order, vaddr))
 		return;
-	if (dma_ops->unmap_single)
-		dma_ops->unmap_single(dev, bus, size, 0);
+	if (ops->unmap_single)
+		ops->unmap_single(dev, bus, size, 0);
 	free_pages((unsigned long)vaddr, order);
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
 static int __init pci_iommu_init(void)
 {
-#ifdef CONFIG_CALGARY_IOMMU
 	calgary_iommu_init();
-#endif
 
 	intel_iommu_init();
 
-#ifdef CONFIG_GART_IOMMU
+	amd_iommu_init();
+
 	gart_iommu_init();
-#endif
 
 	no_iommu_init();
 	return 0;
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index aa8ec928caa8..744126e64950 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -32,6 +32,7 @@
 #include <asm/mtrr.h>
 #include <asm/pgtable.h>
 #include <asm/proto.h>
+#include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/cacheflush.h>
 #include <asm/swiotlb.h>
@@ -104,7 +105,6 @@ static unsigned long alloc_iommu(struct device *dev, int size)
 					  size, base_index, boundary_size, 0);
 	}
 	if (offset != -1) {
-		set_bit_string(iommu_gart_bitmap, offset, size);
 		next_bit = offset+size;
 		if (next_bit >= iommu_pages) {
 			next_bit = 0;
@@ -198,9 +198,7 @@ static void iommu_full(struct device *dev, size_t size, int dir)
 	 * out. Hopefully no network devices use single mappings that big.
 	 */
 
-	printk(KERN_ERR
-		"PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n",
-		size, dev->bus_id);
+	dev_err(dev, "PCI-DMA: Out of IOMMU space for %lu bytes\n", size);
 
 	if (size > PAGE_SIZE*EMERGENCY_PAGES) {
 		if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL)
@@ -534,8 +532,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size)
 	unsigned aper_size = 0, aper_base_32, aper_order;
 	u64 aper_base;
 
-	pci_read_config_dword(dev, 0x94, &aper_base_32);
-	pci_read_config_dword(dev, 0x90, &aper_order);
+	pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32);
+	pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order);
 	aper_order = (aper_order >> 1) & 7;
 
 	aper_base = aper_base_32 & 0x7fff;
@@ -549,14 +547,63 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size)
 	return aper_base;
 }
 
+static void enable_gart_translations(void)
+{
+	int i;
+
+	for (i = 0; i < num_k8_northbridges; i++) {
+		struct pci_dev *dev = k8_northbridges[i];
+
+		enable_gart_translation(dev, __pa(agp_gatt_table));
+	}
+}
+
+/*
+ * If fix_up_north_bridges is set, the north bridges have to be fixed up on
+ * resume in the same way as they are handled in gart_iommu_hole_init().
+ */
+static bool fix_up_north_bridges;
+static u32 aperture_order;
+static u32 aperture_alloc;
+
+void set_up_gart_resume(u32 aper_order, u32 aper_alloc)
+{
+	fix_up_north_bridges = true;
+	aperture_order = aper_order;
+	aperture_alloc = aper_alloc;
+}
+
 static int gart_resume(struct sys_device *dev)
 {
+	printk(KERN_INFO "PCI-DMA: Resuming GART IOMMU\n");
+
+	if (fix_up_north_bridges) {
+		int i;
+
+		printk(KERN_INFO "PCI-DMA: Restoring GART aperture settings\n");
+
+		for (i = 0; i < num_k8_northbridges; i++) {
+			struct pci_dev *dev = k8_northbridges[i];
+
+			/*
+			 * Don't enable translations just yet.  That is the next
+			 * step.  Restore the pre-suspend aperture settings.
+			 */
+			pci_write_config_dword(dev, AMD64_GARTAPERTURECTL,
+						aperture_order << 1);
+			pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE,
+						aperture_alloc >> 25);
+		}
+	}
+
+	enable_gart_translations();
+
 	return 0;
 }
 
 static int gart_suspend(struct sys_device *dev, pm_message_t state)
 {
-	return -EINVAL;
+	return 0;
 }
 
 static struct sysdev_class gart_sysdev_class = {
@@ -582,6 +629,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	struct pci_dev *dev;
 	void *gatt;
 	int i, error;
+	unsigned long start_pfn, end_pfn;
 
 	printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
 	aper_size = aper_base = info->aper_size = 0;
@@ -614,31 +662,25 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	memset(gatt, 0, gatt_size);
 	agp_gatt_table = gatt;
 
-	for (i = 0; i < num_k8_northbridges; i++) {
-		u32 gatt_reg;
-		u32 ctl;
-
-		dev = k8_northbridges[i];
-		gatt_reg = __pa(gatt) >> 12;
-		gatt_reg <<= 4;
-		pci_write_config_dword(dev, 0x98, gatt_reg);
-		pci_read_config_dword(dev, 0x90, &ctl);
-
-		ctl |= 1;
-		ctl &= ~((1<<4) | (1<<5));
-
-		pci_write_config_dword(dev, 0x90, ctl);
-	}
+	enable_gart_translations();
 
 	error = sysdev_class_register(&gart_sysdev_class);
 	if (!error)
 		error = sysdev_register(&device_gart);
 	if (error)
 		panic("Could not register gart_sysdev -- would corrupt data on next suspend");
+
 	flush_gart();
 
 	printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
 	       aper_base, aper_size>>10);
+
+	/* need to map that range */
+	end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+	if (end_pfn > max_low_pfn_mapped) {
+		start_pfn = (aper_base>>PAGE_SHIFT);
+		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
+	}
 	return 0;
 
  nommu:
@@ -650,8 +692,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 extern int agp_amd64_init(void);
 
-static const struct dma_mapping_ops gart_dma_ops = {
-	.mapping_error			= NULL,
+static struct dma_mapping_ops gart_dma_ops = {
 	.map_single			= gart_map_single,
 	.map_simple			= gart_map_simple,
 	.unmap_single			= gart_unmap_single,
@@ -677,11 +718,11 @@ void gart_iommu_shutdown(void)
 		u32 ctl;
 
 		dev = k8_northbridges[i];
-		pci_read_config_dword(dev, 0x90, &ctl);
+		pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
 
-		ctl &= ~1;
+		ctl &= ~GARTEN;
 
-		pci_write_config_dword(dev, 0x90, ctl);
+		pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
 	}
 }
 
@@ -716,10 +757,10 @@ void __init gart_iommu_init(void)
 		return;
 
 	if (no_iommu ||
-	    (!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
+	    (!force_iommu && max_pfn <= MAX_DMA32_PFN) ||
 	    !gart_iommu_aperture ||
 	    (no_agp && init_k8_gatt(&info) < 0)) {
-		if (end_pfn > MAX_DMA32_PFN) {
+		if (max_pfn > MAX_DMA32_PFN) {
 			printk(KERN_WARNING "More than 4GB of memory "
 			       	          "but GART IOMMU not available.\n"
 			       KERN_WARNING "falling back to iommu=soft.\n");
@@ -788,10 +829,10 @@ void __init gart_iommu_init(void)
 	wbinvd();
 
 	/*
-	 * Try to workaround a bug (thanks to BenH)
+	 * Try to workaround a bug (thanks to BenH):
 	 * Set unmapped entries to a scratch page instead of 0.
 	 * Any prefetches that hit unmapped entries won't get an bus abort
-	 * then.
+	 * then. (P2P bridge may be prefetching on DMA reads).
 	 */
 	scratch = get_zeroed_page(GFP_KERNEL);
 	if (!scratch)
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index aec43d56f49c..3f91f71cdc3e 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -7,7 +7,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/processor.h>
 #include <asm/dma.h>
 
@@ -72,21 +72,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
 	return nents;
 }
 
-/* Make sure we keep the same behaviour */
-static int nommu_mapping_error(dma_addr_t dma_addr)
-{
-#ifdef CONFIG_X86_32
-	return 0;
-#else
-	return (dma_addr == bad_dma_address);
-#endif
-}
-
-
-const struct dma_mapping_ops nommu_dma_ops = {
+struct dma_mapping_ops nommu_dma_ops = {
 	.map_single = nommu_map_single,
 	.map_sg = nommu_map_sg,
-	.mapping_error = nommu_mapping_error,
 	.is_phys = 1,
 };
 
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index 490da7f4b8d0..c4ce0332759e 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -5,7 +5,7 @@
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
 
@@ -18,7 +18,7 @@ swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size,
 	return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction);
 }
 
-const struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_mapping_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
@@ -38,7 +38,7 @@ const struct dma_mapping_ops swiotlb_dma_ops = {
 void __init pci_swiotlb_init(void)
 {
 	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
-	if (!iommu_detected && !no_iommu && end_pfn > MAX_DMA32_PFN)
+	if (!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN)
 	       swiotlb = 1;
 	if (swiotlb_force)
 		swiotlb = 1;
diff --git a/arch/x86/kernel/probe_roms_32.c b/arch/x86/kernel/probe_roms_32.c
new file mode 100644
index 000000000000..675a48c404a5
--- /dev/null
+++ b/arch/x86/kernel/probe_roms_32.c
@@ -0,0 +1,166 @@
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/mmzone.h>
+#include <linux/ioport.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/edd.h>
+#include <linux/dmi.h>
+#include <linux/pfn.h>
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+
+
+#include <asm/e820.h>
+#include <asm/mmzone.h>
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <setup_arch.h>
+
+static struct resource system_rom_resource = {
+	.name	= "System ROM",
+	.start	= 0xf0000,
+	.end	= 0xfffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource extension_rom_resource = {
+	.name	= "Extension ROM",
+	.start	= 0xe0000,
+	.end	= 0xeffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource adapter_rom_resources[] = { {
+	.name 	= "Adapter ROM",
+	.start	= 0xc8000,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+} };
+
+static struct resource video_rom_resource = {
+	.name 	= "Video ROM",
+	.start	= 0xc0000,
+	.end	= 0xc7fff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+#define ROMSIGNATURE 0xaa55
+
+static int __init romsignature(const unsigned char *rom)
+{
+	const unsigned short * const ptr = (const unsigned short *)rom;
+	unsigned short sig;
+
+	return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE;
+}
+
+static int __init romchecksum(const unsigned char *rom, unsigned long length)
+{
+	unsigned char sum, c;
+
+	for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--)
+		sum += c;
+	return !length && !sum;
+}
+
+void __init probe_roms(void)
+{
+	const unsigned char *rom;
+	unsigned long start, length, upper;
+	unsigned char c;
+	int i;
+
+	/* video rom */
+	upper = adapter_rom_resources[0].start;
+	for (start = video_rom_resource.start; start < upper; start += 2048) {
+		rom = isa_bus_to_virt(start);
+		if (!romsignature(rom))
+			continue;
+
+		video_rom_resource.start = start;
+
+		if (probe_kernel_address(rom + 2, c) != 0)
+			continue;
+
+		/* 0 < length <= 0x7f * 512, historically */
+		length = c * 512;
+
+		/* if checksum okay, trust length byte */
+		if (length && romchecksum(rom, length))
+			video_rom_resource.end = start + length - 1;
+
+		request_resource(&iomem_resource, &video_rom_resource);
+		break;
+	}
+
+	start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
+	if (start < upper)
+		start = upper;
+
+	/* system rom */
+	request_resource(&iomem_resource, &system_rom_resource);
+	upper = system_rom_resource.start;
+
+	/* check for extension rom (ignore length byte!) */
+	rom = isa_bus_to_virt(extension_rom_resource.start);
+	if (romsignature(rom)) {
+		length = extension_rom_resource.end - extension_rom_resource.start + 1;
+		if (romchecksum(rom, length)) {
+			request_resource(&iomem_resource, &extension_rom_resource);
+			upper = extension_rom_resource.start;
+		}
+	}
+
+	/* check for adapter roms on 2k boundaries */
+	for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) {
+		rom = isa_bus_to_virt(start);
+		if (!romsignature(rom))
+			continue;
+
+		if (probe_kernel_address(rom + 2, c) != 0)
+			continue;
+
+		/* 0 < length <= 0x7f * 512, historically */
+		length = c * 512;
+
+		/* but accept any length that fits if checksum okay */
+		if (!length || start + length > upper || !romchecksum(rom, length))
+			continue;
+
+		adapter_rom_resources[i].start = start;
+		adapter_rom_resources[i].end = start + length - 1;
+		request_resource(&iomem_resource, &adapter_rom_resources[i]);
+
+		start = adapter_rom_resources[i++].end & ~2047UL;
+	}
+}
+
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index ba370dc8685b..7fc4d5b0a6a0 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -6,8 +6,16 @@
 #include <linux/sched.h>
 #include <linux/module.h>
 #include <linux/pm.h>
+#include <linux/clockchips.h>
+#include <asm/system.h>
+
+unsigned long idle_halt;
+EXPORT_SYMBOL(idle_halt);
+unsigned long idle_nomwait;
+EXPORT_SYMBOL(idle_nomwait);
 
 struct kmem_cache *task_xstate_cachep;
+static int force_mwait __cpuinitdata;
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
@@ -45,6 +53,76 @@ void arch_task_cache_init(void)
 				  SLAB_PANIC, NULL);
 }
 
+/*
+ * Idle related variables and functions
+ */
+unsigned long boot_option_idle_override = 0;
+EXPORT_SYMBOL(boot_option_idle_override);
+
+/*
+ * Powermanagement idle function, if any..
+ */
+void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
+#ifdef CONFIG_X86_32
+/*
+ * This halt magic was a workaround for ancient floppy DMA
+ * wreckage. It should be safe to remove.
+ */
+static int hlt_counter;
+void disable_hlt(void)
+{
+	hlt_counter++;
+}
+EXPORT_SYMBOL(disable_hlt);
+
+void enable_hlt(void)
+{
+	hlt_counter--;
+}
+EXPORT_SYMBOL(enable_hlt);
+
+static inline int hlt_use_halt(void)
+{
+	return (!hlt_counter && boot_cpu_data.hlt_works_ok);
+}
+#else
+static inline int hlt_use_halt(void)
+{
+	return 1;
+}
+#endif
+
+/*
+ * We use this if we don't have any better
+ * idle routine..
+ */
+void default_idle(void)
+{
+	if (hlt_use_halt()) {
+		current_thread_info()->status &= ~TS_POLLING;
+		/*
+		 * TS_POLLING-cleared state must be visible before we
+		 * test NEED_RESCHED:
+		 */
+		smp_mb();
+
+		if (!need_resched())
+			safe_halt();	/* enables interrupts racelessly */
+		else
+			local_irq_enable();
+		current_thread_info()->status |= TS_POLLING;
+	} else {
+		local_irq_enable();
+		/* loop is done by the caller */
+		cpu_relax();
+	}
+}
+#ifdef CONFIG_APM_MODULE
+EXPORT_SYMBOL(default_idle);
+#endif
+
 static void do_nothing(void *unused)
 {
 }
@@ -61,7 +139,7 @@ void cpu_idle_wait(void)
 {
 	smp_mb();
 	/* kick all the CPUs so that they exit out of pm_idle */
-	smp_call_function(do_nothing, NULL, 0, 1);
+	smp_call_function(do_nothing, NULL, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
@@ -122,54 +200,163 @@ static void poll_idle(void)
  *
  * idle=mwait overrides this decision and forces the usage of mwait.
  */
+static int __cpuinitdata force_mwait;
+
+#define MWAIT_INFO			0x05
+#define MWAIT_ECX_EXTENDED_INFO		0x01
+#define MWAIT_EDX_C1			0xf0
+
 static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
 {
+	u32 eax, ebx, ecx, edx;
+
 	if (force_mwait)
 		return 1;
 
-	if (c->x86_vendor == X86_VENDOR_AMD) {
-		switch(c->x86) {
-		case 0x10:
-		case 0x11:
-			return 0;
-		}
-	}
+	if (c->cpuid_level < MWAIT_INFO)
+		return 0;
+
+	cpuid(MWAIT_INFO, &eax, &ebx, &ecx, &edx);
+	/* Check, whether EDX has extended info about MWAIT */
+	if (!(ecx & MWAIT_ECX_EXTENDED_INFO))
+		return 1;
+
+	/*
+	 * edx enumeratios MONITOR/MWAIT extensions. Check, whether
+	 * C1  supports MWAIT
+	 */
+	return (edx & MWAIT_EDX_C1);
+}
+
+/*
+ * Check for AMD CPUs, which have potentially C1E support
+ */
+static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
+{
+	if (c->x86_vendor != X86_VENDOR_AMD)
+		return 0;
+
+	if (c->x86 < 0x0F)
+		return 0;
+
+	/* Family 0x0f models < rev F do not have C1E */
+	if (c->x86 == 0x0f && c->x86_model < 0x40)
+		return 0;
+
 	return 1;
 }
 
-void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
+/*
+ * C1E aware idle routine. We check for C1E active in the interrupt
+ * pending message MSR. If we detect C1E, then we handle it the same
+ * way as C3 power states (local apic timer and TSC stop)
+ */
+static void c1e_idle(void)
 {
-	static int selected;
+	static cpumask_t c1e_mask = CPU_MASK_NONE;
+	static int c1e_detected;
 
-	if (selected)
+	if (need_resched())
 		return;
+
+	if (!c1e_detected) {
+		u32 lo, hi;
+
+		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
+		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
+			c1e_detected = 1;
+			mark_tsc_unstable("TSC halt in C1E");
+			printk(KERN_INFO "System has C1E enabled\n");
+		}
+	}
+
+	if (c1e_detected) {
+		int cpu = smp_processor_id();
+
+		if (!cpu_isset(cpu, c1e_mask)) {
+			cpu_set(cpu, c1e_mask);
+			/*
+			 * Force broadcast so ACPI can not interfere. Needs
+			 * to run with interrupts enabled as it uses
+			 * smp_function_call.
+			 */
+			local_irq_enable();
+			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
+					   &cpu);
+			printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
+			       cpu);
+			local_irq_disable();
+		}
+		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
+
+		default_idle();
+
+		/*
+		 * The switch back from broadcast mode needs to be
+		 * called with interrupts disabled.
+		 */
+		 local_irq_disable();
+		 clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
+		 local_irq_enable();
+	} else
+		default_idle();
+}
+
+void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
+{
 #ifdef CONFIG_X86_SMP
 	if (pm_idle == poll_idle && smp_num_siblings > 1) {
 		printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
 			" performance may degrade.\n");
 	}
 #endif
+	if (pm_idle)
+		return;
+
 	if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) {
 		/*
-		 * Skip, if setup has overridden idle.
 		 * One CPU supports mwait => All CPUs supports mwait
 		 */
-		if (!pm_idle) {
-			printk(KERN_INFO "using mwait in idle threads.\n");
-			pm_idle = mwait_idle;
-		}
-	}
-	selected = 1;
+		printk(KERN_INFO "using mwait in idle threads.\n");
+		pm_idle = mwait_idle;
+	} else if (check_c1e_idle(c)) {
+		printk(KERN_INFO "using C1E aware idle routine\n");
+		pm_idle = c1e_idle;
+	} else
+		pm_idle = default_idle;
 }
 
 static int __init idle_setup(char *str)
 {
+	if (!str)
+		return -EINVAL;
+
 	if (!strcmp(str, "poll")) {
 		printk("using polling idle threads.\n");
 		pm_idle = poll_idle;
 	} else if (!strcmp(str, "mwait"))
 		force_mwait = 1;
-	else
+	else if (!strcmp(str, "halt")) {
+		/*
+		 * When the boot option of idle=halt is added, halt is
+		 * forced to be used for CPU idle. In such case CPU C2/C3
+		 * won't be used again.
+		 * To continue to load the CPU idle driver, don't touch
+		 * the boot_option_idle_override.
+		 */
+		pm_idle = default_idle;
+		idle_halt = 1;
+		return 0;
+	} else if (!strcmp(str, "nomwait")) {
+		/*
+		 * If the boot option of "idle=nomwait" is added,
+		 * it means that mwait will be disabled for CPU C2/C3
+		 * states. In such case it won't touch the variable
+		 * of boot_option_idle_override.
+		 */
+		idle_nomwait = 1;
+		return 0;
+	} else
 		return -1;
 
 	boot_option_idle_override = 1;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index e2db9ac5c61c..53bc653ed5ca 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -58,11 +58,6 @@
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
-static int hlt_counter;
-
-unsigned long boot_option_idle_override = 0;
-EXPORT_SYMBOL(boot_option_idle_override);
-
 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
 EXPORT_PER_CPU_SYMBOL(current_task);
 
@@ -77,57 +72,24 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return ((unsigned long *)tsk->thread.sp)[3];
 }
 
-/*
- * Powermanagement idle function, if any..
- */
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
+#ifdef CONFIG_HOTPLUG_CPU
+#include <asm/nmi.h>
 
-void disable_hlt(void)
+static void cpu_exit_clear(void)
 {
-	hlt_counter++;
-}
+	int cpu = raw_smp_processor_id();
 
-EXPORT_SYMBOL(disable_hlt);
+	idle_task_exit();
 
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
+	cpu_uninit();
+	irq_ctx_exit(cpu);
 
-EXPORT_SYMBOL(enable_hlt);
-
-/*
- * We use this if we don't have any better
- * idle routine..
- */
-void default_idle(void)
-{
-	if (!hlt_counter && boot_cpu_data.hlt_works_ok) {
-		current_thread_info()->status &= ~TS_POLLING;
-		/*
-		 * TS_POLLING-cleared state must be visible before we
-		 * test NEED_RESCHED:
-		 */
-		smp_mb();
+	cpu_clear(cpu, cpu_callout_map);
+	cpu_clear(cpu, cpu_callin_map);
 
-		if (!need_resched())
-			safe_halt();	/* enables interrupts racelessly */
-		else
-			local_irq_enable();
-		current_thread_info()->status |= TS_POLLING;
-	} else {
-		local_irq_enable();
-		/* loop is done by the caller */
-		cpu_relax();
-	}
+	numa_remove_cpu(cpu);
 }
-#ifdef CONFIG_APM_MODULE
-EXPORT_SYMBOL(default_idle);
-#endif
 
-#ifdef CONFIG_HOTPLUG_CPU
-#include <asm/nmi.h>
 /* We don't actually take CPU down, just spin without interrupts. */
 static inline void play_dead(void)
 {
@@ -166,26 +128,24 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
-			void (*idle)(void);
 
 			check_pgt_cache();
 			rmb();
-			idle = pm_idle;
 
 			if (rcu_pending(cpu))
 				rcu_check_callbacks(cpu, 0);
 
-			if (!idle)
-				idle = default_idle;
-
 			if (cpu_is_offline(cpu))
 				play_dead();
 
 			local_irq_disable();
 			__get_cpu_var(irq_stat).idle_timestamp = jiffies;
-			idle();
+			/* Don't trace irqs off for idle */
+			stop_critical_timings();
+			pm_idle();
+			start_critical_timings();
 		}
 		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index c6eb5c91e5f6..3fb62a7d9a16 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -56,15 +56,6 @@ asmlinkage extern void ret_from_fork(void);
 
 unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED;
 
-unsigned long boot_option_idle_override = 0;
-EXPORT_SYMBOL(boot_option_idle_override);
-
-/*
- * Powermanagement idle function, if any..
- */
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
-
 static ATOMIC_NOTIFIER_HEAD(idle_notifier);
 
 void idle_notifier_register(struct notifier_block *n)
@@ -94,25 +85,6 @@ void exit_idle(void)
 	__exit_idle();
 }
 
-/*
- * We use this if we don't have any better
- * idle routine..
- */
-void default_idle(void)
-{
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we
-	 * test NEED_RESCHED:
-	 */
-	smp_mb();
-	if (!need_resched())
-		safe_halt();	/* enables interrupts racelessly */
-	else
-		local_irq_enable();
-	current_thread_info()->status |= TS_POLLING;
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 DECLARE_PER_CPU(int, cpu_state);
 
@@ -148,14 +120,11 @@ void cpu_idle(void)
 	current_thread_info()->status |= TS_POLLING;
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
-			void (*idle)(void);
 
 			rmb();
-			idle = pm_idle;
-			if (!idle)
-				idle = default_idle;
+
 			if (cpu_is_offline(smp_processor_id()))
 				play_dead();
 			/*
@@ -165,7 +134,10 @@ void cpu_idle(void)
 			 */
 			local_irq_disable();
 			enter_idle();
-			idle();
+			/* Don't trace irqs off for idle */
+			stop_critical_timings();
+			pm_idle();
+			start_critical_timings();
 			/* In many cases the interrupt that ended idle
 			   has already called exit_idle. But some idle
 			   loops can be woken up without interrupt. */
@@ -366,10 +338,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 	p->thread.fs = me->thread.fs;
 	p->thread.gs = me->thread.gs;
 
-	asm("mov %%gs,%0" : "=m" (p->thread.gsindex));
-	asm("mov %%fs,%0" : "=m" (p->thread.fsindex));
-	asm("mov %%es,%0" : "=m" (p->thread.es));
-	asm("mov %%ds,%0" : "=m" (p->thread.ds));
+	savesegment(gs, p->thread.gsindex);
+	savesegment(fs, p->thread.fsindex);
+	savesegment(es, p->thread.es);
+	savesegment(ds, p->thread.ds);
 
 	if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
@@ -408,7 +380,9 @@ out:
 void
 start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
 {
-	asm volatile("movl %0, %%fs; movl %0, %%es; movl %0, %%ds" :: "r"(0));
+	loadsegment(fs, 0);
+	loadsegment(es, 0);
+	loadsegment(ds, 0);
 	load_gs_index(0);
 	regs->ip		= new_ip;
 	regs->sp		= new_sp;
@@ -563,10 +537,11 @@ static inline void __switch_to_xtra(struct task_struct *prev_p,
 struct task_struct *
 __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 {
-	struct thread_struct *prev = &prev_p->thread,
-				 *next = &next_p->thread;
+	struct thread_struct *prev = &prev_p->thread;
+	struct thread_struct *next = &next_p->thread;
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
+	unsigned fsindex, gsindex;
 
 	/* we're going to use this soon, after a few expensive things */
 	if (next_p->fpu_counter>5)
@@ -581,52 +556,64 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 * Switch DS and ES.
 	 * This won't pick up thread selector changes, but I guess that is ok.
 	 */
-	asm volatile("mov %%es,%0" : "=m" (prev->es));
+	savesegment(es, prev->es);
 	if (unlikely(next->es | prev->es))
 		loadsegment(es, next->es); 
-	
-	asm volatile ("mov %%ds,%0" : "=m" (prev->ds));
+
+	savesegment(ds, prev->ds);
 	if (unlikely(next->ds | prev->ds))
 		loadsegment(ds, next->ds);
 
+
+	/* We must save %fs and %gs before load_TLS() because
+	 * %fs and %gs may be cleared by load_TLS().
+	 *
+	 * (e.g. xen_load_tls())
+	 */
+	savesegment(fs, fsindex);
+	savesegment(gs, gsindex);
+
 	load_TLS(next, cpu);
 
+	/*
+	 * Leave lazy mode, flushing any hypercalls made here.
+	 * This must be done before restoring TLS segments so
+	 * the GDT and LDT are properly updated, and must be
+	 * done before math_state_restore, so the TS bit is up
+	 * to date.
+	 */
+	arch_leave_lazy_cpu_mode();
+
 	/* 
 	 * Switch FS and GS.
+	 *
+	 * Segment register != 0 always requires a reload.  Also
+	 * reload when it has changed.  When prev process used 64bit
+	 * base always reload to avoid an information leak.
 	 */
-	{ 
-		unsigned fsindex;
-		asm volatile("movl %%fs,%0" : "=r" (fsindex)); 
-		/* segment register != 0 always requires a reload. 
-		   also reload when it has changed. 
-		   when prev process used 64bit base always reload
-		   to avoid an information leak. */
-		if (unlikely(fsindex | next->fsindex | prev->fs)) {
-			loadsegment(fs, next->fsindex);
-			/* check if the user used a selector != 0
-	                 * if yes clear 64bit base, since overloaded base
-                         * is always mapped to the Null selector
-                         */
-			if (fsindex)
+	if (unlikely(fsindex | next->fsindex | prev->fs)) {
+		loadsegment(fs, next->fsindex);
+		/* 
+		 * Check if the user used a selector != 0; if yes
+		 *  clear 64bit base, since overloaded base is always
+		 *  mapped to the Null selector
+		 */
+		if (fsindex)
 			prev->fs = 0;				
-		}
-		/* when next process has a 64bit base use it */
-		if (next->fs) 
-			wrmsrl(MSR_FS_BASE, next->fs); 
-		prev->fsindex = fsindex;
 	}
-	{ 
-		unsigned gsindex;
-		asm volatile("movl %%gs,%0" : "=r" (gsindex)); 
-		if (unlikely(gsindex | next->gsindex | prev->gs)) {
-			load_gs_index(next->gsindex);
-			if (gsindex)
+	/* when next process has a 64bit base use it */
+	if (next->fs)
+		wrmsrl(MSR_FS_BASE, next->fs);
+	prev->fsindex = fsindex;
+
+	if (unlikely(gsindex | next->gsindex | prev->gs)) {
+		load_gs_index(next->gsindex);
+		if (gsindex)
 			prev->gs = 0;				
-		}
-		if (next->gs)
-			wrmsrl(MSR_KERNEL_GS_BASE, next->gs); 
-		prev->gsindex = gsindex;
 	}
+	if (next->gs)
+		wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
+	prev->gsindex = gsindex;
 
 	/* Must be after DS reload */
 	unlazy_fpu(prev_p);
@@ -639,7 +626,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	write_pda(pcurrent, next_p); 
 
 	write_pda(kernelstack,
-	(unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET);
+		  (unsigned long)task_stack_page(next_p) +
+		  THREAD_SIZE - PDA_STACKOFFSET);
 #ifdef CONFIG_CC_STACKPROTECTOR
 	write_pda(stack_canary, next_p->stack_canary);
 	/*
@@ -798,7 +786,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 			set_32bit_tls(task, FS_TLS, addr);
 			if (doit) {
 				load_TLS(&task->thread, cpu);
-				asm volatile("movl %0,%%fs" :: "r"(FS_TLS_SEL));
+				loadsegment(fs, FS_TLS_SEL);
 			}
 			task->thread.fsindex = FS_TLS_SEL;
 			task->thread.fs = 0;
@@ -808,7 +796,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 			if (doit) {
 				/* set the selector to 0 to not confuse
 				   __switch_to */
-				asm volatile("movl %0,%%fs" :: "r" (0));
+				loadsegment(fs, 0);
 				ret = checking_wrmsrl(MSR_FS_BASE, addr);
 			}
 		}
@@ -831,7 +819,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 		if (task->thread.gsindex == GS_TLS_SEL)
 			base = read_32bit_tls(task, GS_TLS);
 		else if (doit) {
-			asm("movl %%gs,%0" : "=r" (gsindex));
+			savesegment(gs, gsindex);
 			if (gsindex)
 				rdmsrl(MSR_KERNEL_GS_BASE, base);
 			else
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index a7835f282936..e37dccce85db 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -943,13 +943,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		return copy_regset_to_user(child, &user_x86_32_view,
 					   REGSET_XFP,
 					   0, sizeof(struct user_fxsr_struct),
-					   datap);
+					   datap) ? -EIO : 0;
 
 	case PTRACE_SETFPXREGS:	/* Set the child extended FPU state. */
 		return copy_regset_from_user(child, &user_x86_32_view,
 					     REGSET_XFP,
 					     0, sizeof(struct user_fxsr_struct),
-					     datap);
+					     datap) ? -EIO : 0;
 #endif
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
@@ -1357,8 +1357,6 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-
 void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 {
 	struct siginfo info;
@@ -1377,89 +1375,10 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 	force_sig_info(SIGTRAP, &info, tsk);
 }
 
-/* notification of system call entry/exit
- * - triggered by current->work.syscall_trace
- */
-int do_syscall_trace(struct pt_regs *regs, int entryexit)
-{
-	int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU);
-	/*
-	 * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall
-	 * interception
-	 */
-	int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP);
-	int ret = 0;
-
-	/* do the secure computing check first */
-	if (!entryexit)
-		secure_computing(regs->orig_ax);
-
-	if (unlikely(current->audit_context)) {
-		if (entryexit)
-			audit_syscall_exit(AUDITSC_RESULT(regs->ax),
-						regs->ax);
-		/* Debug traps, when using PTRACE_SINGLESTEP, must be sent only
-		 * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is
-		 * not used, entry.S will call us only on syscall exit, not
-		 * entry; so when TIF_SYSCALL_AUDIT is used we must avoid
-		 * calling send_sigtrap() on syscall entry.
-		 *
-		 * Note that when PTRACE_SYSEMU_SINGLESTEP is used,
-		 * is_singlestep is false, despite his name, so we will still do
-		 * the correct thing.
-		 */
-		else if (is_singlestep)
-			goto out;
-	}
-
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
-
-	/* If a process stops on the 1st tracepoint with SYSCALL_TRACE
-	 * and then is resumed with SYSEMU_SINGLESTEP, it will come in
-	 * here. We have to check this and return */
-	if (is_sysemu && entryexit)
-		return 0;
-
-	/* Fake a debug trap */
-	if (is_singlestep)
-		send_sigtrap(current, regs, 0);
-
- 	if (!test_thread_flag(TIF_SYSCALL_TRACE) && !is_sysemu)
-		goto out;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	/* Note that the debugger could change the result of test_thread_flag!*/
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-	ret = is_sysemu;
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_ax,
-				    regs->bx, regs->cx, regs->dx, regs->si);
-	if (ret == 0)
-		return 0;
-
-	regs->orig_ax = -1; /* force skip of syscall restarting */
-	if (unlikely(current->audit_context))
-		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
-	return 1;
-}
-
-#else  /* CONFIG_X86_64 */
-
 static void syscall_trace(struct pt_regs *regs)
 {
+	if (!(current->ptrace & PT_PTRACED))
+		return;
 
 #if 0
 	printk("trace %s ip %lx sp %lx ax %d origrax %d caller %lx tiflags %x ptrace %x\n",
@@ -1481,39 +1400,81 @@ static void syscall_trace(struct pt_regs *regs)
 	}
 }
 
-asmlinkage void syscall_trace_enter(struct pt_regs *regs)
+#ifdef CONFIG_X86_32
+# define IS_IA32	1
+#elif defined CONFIG_IA32_EMULATION
+# define IS_IA32	test_thread_flag(TIF_IA32)
+#else
+# define IS_IA32	0
+#endif
+
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+asmregparm long syscall_trace_enter(struct pt_regs *regs)
 {
+	long ret = 0;
+
+	/*
+	 * If we stepped into a sysenter/syscall insn, it trapped in
+	 * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+	 * If user-mode had set TF itself, then it's still clear from
+	 * do_debug() and we need to set it again to restore the user
+	 * state.  If we entered on the slow path, TF was already set.
+	 */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		regs->flags |= X86_EFLAGS_TF;
+
 	/* do the secure computing check first */
 	secure_computing(regs->orig_ax);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
+	if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
+		ret = -1L;
+
+	if (ret || test_thread_flag(TIF_SYSCALL_TRACE))
 		syscall_trace(regs);
 
 	if (unlikely(current->audit_context)) {
-		if (test_thread_flag(TIF_IA32)) {
+		if (IS_IA32)
 			audit_syscall_entry(AUDIT_ARCH_I386,
 					    regs->orig_ax,
 					    regs->bx, regs->cx,
 					    regs->dx, regs->si);
-		} else {
+#ifdef CONFIG_X86_64
+		else
 			audit_syscall_entry(AUDIT_ARCH_X86_64,
 					    regs->orig_ax,
 					    regs->di, regs->si,
 					    regs->dx, regs->r10);
-		}
+#endif
 	}
+
+	return ret ?: regs->orig_ax;
 }
 
-asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+asmregparm void syscall_trace_leave(struct pt_regs *regs)
 {
 	if (unlikely(current->audit_context))
 		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		syscall_trace(regs);
-}
 
-#endif	/* CONFIG_X86_32 */
+	/*
+	 * If TIF_SYSCALL_EMU is set, we only get here because of
+	 * TIF_SINGLESTEP (i.e. this is PTRACE_SYSEMU_SINGLESTEP).
+	 * We already reported this syscall instruction in
+	 * syscall_trace_enter(), so don't do any more now.
+	 */
+	if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
+		return;
+
+	/*
+	 * If we are single-stepping, synthesize a trap to follow the
+	 * system call instruction.
+	 */
+	if (test_thread_flag(TIF_SINGLESTEP) &&
+	    (current->ptrace & PT_PTRACED))
+		send_sigtrap(current, regs, 0);
+}
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index d89a648fe710..d13858818100 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -65,6 +65,7 @@ static enum {
 	ICH_FORCE_HPET_RESUME,
 	VT8237_FORCE_HPET_RESUME,
 	NVIDIA_FORCE_HPET_RESUME,
+	ATI_FORCE_HPET_RESUME,
 } force_hpet_resume_type;
 
 static void __iomem *rcba_base;
@@ -158,6 +159,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev)
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
 			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
+			 ich_force_enable_hpet);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
 			 ich_force_enable_hpet);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
@@ -174,6 +177,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
 
 static struct pci_dev *cached_dev;
 
+static void hpet_print_force_info(void)
+{
+	printk(KERN_INFO "HPET not enabled in BIOS. "
+	       "You might try hpet=force boot option\n");
+}
+
 static void old_ich_force_hpet_resume(void)
 {
 	u32 val;
@@ -253,8 +262,12 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
 {
 	if (hpet_force_user)
 		old_ich_force_enable_hpet(dev);
+	else
+		hpet_print_force_info();
 }
 
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
+			 old_ich_force_enable_hpet_user);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
 			 old_ich_force_enable_hpet_user);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,
@@ -290,9 +303,14 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev)
 {
 	u32 uninitialized_var(val);
 
-	if (!hpet_force_user || hpet_address || force_hpet_address)
+	if (hpet_address || force_hpet_address)
 		return;
 
+	if (!hpet_force_user) {
+		hpet_print_force_info();
+		return;
+	}
+
 	pci_read_config_dword(dev, 0x68, &val);
 	/*
 	 * Bit 7 is HPET enable bit.
@@ -330,6 +348,36 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
 			 vt8237_force_enable_hpet);
 
+static void ati_force_hpet_resume(void)
+{
+	pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
+	printk(KERN_DEBUG "Force enabled HPET at resume\n");
+}
+
+static void ati_force_enable_hpet(struct pci_dev *dev)
+{
+	u32 uninitialized_var(val);
+
+	if (hpet_address || force_hpet_address)
+		return;
+
+	if (!hpet_force_user) {
+		hpet_print_force_info();
+		return;
+	}
+
+	pci_write_config_dword(dev, 0x14, 0xfed00000);
+	pci_read_config_dword(dev, 0x14, &val);
+	force_hpet_address = val;
+	force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
+	dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
+		   force_hpet_address);
+	cached_dev = dev;
+	return;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
+			 ati_force_enable_hpet);
+
 /*
  * Undocumented chipset feature taken from LinuxBIOS.
  */
@@ -343,8 +391,13 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev)
 {
 	u32 uninitialized_var(val);
 
-	if (!hpet_force_user || hpet_address || force_hpet_address)
+	if (hpet_address || force_hpet_address)
+		return;
+
+	if (!hpet_force_user) {
+		hpet_print_force_info();
 		return;
+	}
 
 	pci_write_config_dword(dev, 0x44, 0xfed00001);
 	pci_read_config_dword(dev, 0x44, &val);
@@ -397,6 +450,9 @@ void force_hpet_resume(void)
 	case NVIDIA_FORCE_HPET_RESUME:
 		nvidia_force_hpet_resume();
 		return;
+	case ATI_FORCE_HPET_RESUME:
+		ati_force_hpet_resume();
+		return;
 	default:
 		break;
 	}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f6be7d5f82f8..06a9f643817e 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -27,7 +27,7 @@
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-static long no_idt[3];
+static const struct desc_ptr no_idt = {};
 static int reboot_mode;
 enum reboot_type reboot_type = BOOT_KBD;
 int reboot_force;
@@ -177,6 +177,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell T5400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell Precision T5400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
+		},
+	},
 	{	/* Handle problems with rebooting on HP laptops */
 		.callback = set_bios_reboot,
 		.ident = "HP Compaq Laptop",
@@ -201,15 +209,15 @@ core_initcall(reboot_init);
    controller to pulse the CPU reset line, which is more thorough, but
    doesn't work with at least one type of 486 motherboard.  It is easy
    to stop this code working; hence the copious comments. */
-static unsigned long long
+static const unsigned long long
 real_mode_gdt_entries [3] =
 {
 	0x0000000000000000ULL,	/* Null descriptor */
-	0x00009a000000ffffULL,	/* 16-bit real-mode 64k code at 0x00000000 */
-	0x000092000100ffffULL	/* 16-bit real-mode 64k data at 0x00000100 */
+	0x00009b000000ffffULL,	/* 16-bit real-mode 64k code at 0x00000000 */
+	0x000093000100ffffULL	/* 16-bit real-mode 64k data at 0x00000100 */
 };
 
-static struct desc_ptr
+static const struct desc_ptr
 real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries },
 real_mode_idt = { 0x3ff, 0 };
 
@@ -231,7 +239,7 @@ real_mode_idt = { 0x3ff, 0 };
 
    More could be done here to set up the registers as if a CPU reset had
    occurred; hopefully real BIOSs don't assume much. */
-static unsigned char real_mode_switch [] =
+static const unsigned char real_mode_switch [] =
 {
 	0x66, 0x0f, 0x20, 0xc0,			/*    movl  %cr0,%eax        */
 	0x66, 0x83, 0xe0, 0x11,			/*    andl  $0x00000011,%eax */
@@ -245,7 +253,7 @@ static unsigned char real_mode_switch [] =
 	0x24, 0x10,				/* f: andb  $0x10,al         */
 	0x66, 0x0f, 0x22, 0xc0			/*    movl  %eax,%cr0        */
 };
-static unsigned char jump_to_bios [] =
+static const unsigned char jump_to_bios [] =
 {
 	0xea, 0x00, 0x00, 0xff, 0xff		/*    ljmp  $0xffff,$0x0000  */
 };
@@ -255,7 +263,7 @@ static unsigned char jump_to_bios [] =
  * specified by the code and length parameters.
  * We assume that length will aways be less that 100!
  */
-void machine_real_restart(unsigned char *code, int length)
+void machine_real_restart(const unsigned char *code, int length)
 {
 	local_irq_disable();
 
@@ -368,7 +376,7 @@ static void native_machine_emergency_restart(void)
 			}
 
 		case BOOT_TRIPLE:
-			load_idt((const struct desc_ptr *)&no_idt);
+			load_idt(&no_idt);
 			__asm__ __volatile__("int3");
 
 			reboot_type = BOOT_KBD;
@@ -403,24 +411,28 @@ void native_machine_shutdown(void)
 {
 	/* Stop the cpus and apics */
 #ifdef CONFIG_SMP
-	int reboot_cpu_id;
 
 	/* The boot cpu is always logical cpu 0 */
-	reboot_cpu_id = 0;
+	int reboot_cpu_id = 0;
+	cpumask_of_cpu_ptr(newmask, reboot_cpu_id);
 
 #ifdef CONFIG_X86_32
 	/* See if there has been given a command line override */
 	if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
-		cpu_online(reboot_cpu))
+		cpu_online(reboot_cpu)) {
 		reboot_cpu_id = reboot_cpu;
+		cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
+	}
 #endif
 
 	/* Make certain the cpu I'm about to reboot on is online */
-	if (!cpu_online(reboot_cpu_id))
+	if (!cpu_online(reboot_cpu_id)) {
 		reboot_cpu_id = smp_processor_id();
+		cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
+	}
 
 	/* Make certain I only run on the appropriate processor */
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(reboot_cpu_id));
+	set_cpus_allowed_ptr(current, newmask);
 
 	/* O.K Now that I'm on the appropriate processor,
 	 * stop all of the others.
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index dec0b5ec25c2..61a837743fe5 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -49,7 +49,7 @@ struct device_fixup {
 	void (*reboot_fixup)(struct pci_dev *);
 };
 
-static struct device_fixup fixups_table[] = {
+static const struct device_fixup fixups_table[] = {
 { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
 { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
@@ -64,7 +64,7 @@ static struct device_fixup fixups_table[] = {
  */
 void mach_reboot_fixups(void)
 {
-	struct device_fixup *cur;
+	const struct device_fixup *cur;
 	struct pci_dev *dev;
 	int i;
 
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index c30fe25d470d..703310a99023 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -20,11 +20,44 @@
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define PAE_PGD_ATTR (_PAGE_PRESENT)
 
+/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are
+ * used to save some data for jumping back
+ */
+#define DATA(offset)		(PAGE_SIZE/2+(offset))
+
+/* Minimal CPU state */
+#define ESP			DATA(0x0)
+#define CR0			DATA(0x4)
+#define CR3			DATA(0x8)
+#define CR4			DATA(0xc)
+
+/* other data */
+#define CP_VA_CONTROL_PAGE	DATA(0x10)
+#define CP_PA_PGD		DATA(0x14)
+#define CP_PA_SWAP_PAGE		DATA(0x18)
+#define CP_PA_BACKUP_PAGES_MAP	DATA(0x1c)
+
 	.text
 	.align PAGE_SIZE
 	.globl relocate_kernel
 relocate_kernel:
-	movl	8(%esp), %ebp /* list of pages */
+	/* Save the CPU context, used for jumping back */
+
+	pushl	%ebx
+	pushl	%esi
+	pushl	%edi
+	pushl	%ebp
+	pushf
+
+	movl	20+8(%esp), %ebp /* list of pages */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%esp, ESP(%edi)
+	movl	%cr0, %eax
+	movl	%eax, CR0(%edi)
+	movl	%cr3, %eax
+	movl	%eax, CR3(%edi)
+	movl	%cr4, %eax
+	movl	%eax, CR4(%edi)
 
 #ifdef CONFIG_X86_PAE
 	/* map the control page at its virtual address */
@@ -138,15 +171,25 @@ relocate_kernel:
 
 relocate_new_kernel:
 	/* read the arguments and say goodbye to the stack */
-	movl  4(%esp), %ebx /* page_list */
-	movl  8(%esp), %ebp /* list of pages */
-	movl  12(%esp), %edx /* start address */
-	movl  16(%esp), %ecx /* cpu_has_pae */
+	movl  20+4(%esp), %ebx /* page_list */
+	movl  20+8(%esp), %ebp /* list of pages */
+	movl  20+12(%esp), %edx /* start address */
+	movl  20+16(%esp), %ecx /* cpu_has_pae */
+	movl  20+20(%esp), %esi /* preserve_context */
 
 	/* zero out flags, and disable interrupts */
 	pushl $0
 	popfl
 
+	/* save some information for jumping back */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%edi, CP_VA_CONTROL_PAGE(%edi)
+	movl	PTR(PA_PGD)(%ebp), %eax
+	movl	%eax, CP_PA_PGD(%edi)
+	movl	PTR(PA_SWAP_PAGE)(%ebp), %eax
+	movl	%eax, CP_PA_SWAP_PAGE(%edi)
+	movl	%ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
+
 	/* get physical address of control page now */
 	/* this is impossible after page table switch */
 	movl	PTR(PA_CONTROL_PAGE)(%ebp), %edi
@@ -197,8 +240,90 @@ identity_mapped:
 	xorl	%eax, %eax
 	movl	%eax, %cr3
 
+	movl	CP_PA_SWAP_PAGE(%edi), %eax
+	pushl	%eax
+	pushl	%ebx
+	call	swap_pages
+	addl	$8, %esp
+
+	/* To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB, it's handy, and not processor dependent.
+	 */
+	xorl	%eax, %eax
+	movl	%eax, %cr3
+
+	/* set all of the registers to known values */
+	/* leave %esp alone */
+
+	testl	%esi, %esi
+	jnz 1f
+	xorl	%edi, %edi
+	xorl	%eax, %eax
+	xorl	%ebx, %ebx
+	xorl    %ecx, %ecx
+	xorl    %edx, %edx
+	xorl    %esi, %esi
+	xorl    %ebp, %ebp
+	ret
+1:
+	popl	%edx
+	movl	CP_PA_SWAP_PAGE(%edi), %esp
+	addl	$PAGE_SIZE, %esp
+2:
+	call	*%edx
+
+	/* get the re-entry point of the peer system */
+	movl	0(%esp), %ebp
+	call	1f
+1:
+	popl	%ebx
+	subl	$(1b - relocate_kernel), %ebx
+	movl	CP_VA_CONTROL_PAGE(%ebx), %edi
+	lea	PAGE_SIZE(%ebx), %esp
+	movl	CP_PA_SWAP_PAGE(%ebx), %eax
+	movl	CP_PA_BACKUP_PAGES_MAP(%ebx), %edx
+	pushl	%eax
+	pushl	%edx
+	call	swap_pages
+	addl	$8, %esp
+	movl	CP_PA_PGD(%ebx), %eax
+	movl	%eax, %cr3
+	movl	%cr0, %eax
+	orl	$(1<<31), %eax
+	movl	%eax, %cr0
+	lea	PAGE_SIZE(%edi), %esp
+	movl	%edi, %eax
+	addl	$(virtual_mapped - relocate_kernel), %eax
+	pushl	%eax
+	ret
+
+virtual_mapped:
+	movl	CR4(%edi), %eax
+	movl	%eax, %cr4
+	movl	CR3(%edi), %eax
+	movl	%eax, %cr3
+	movl	CR0(%edi), %eax
+	movl	%eax, %cr0
+	movl	ESP(%edi), %esp
+	movl	%ebp, %eax
+
+	popf
+	popl	%ebp
+	popl	%edi
+	popl	%esi
+	popl	%ebx
+	ret
+
 	/* Do the copies */
-	movl	%ebx, %ecx
+swap_pages:
+	movl	8(%esp), %edx
+	movl	4(%esp), %ecx
+	pushl	%ebp
+	pushl	%ebx
+	pushl	%edi
+	pushl	%esi
+	movl	%ecx, %ebx
 	jmp	1f
 
 0:	/* top, read another word from the indirection page */
@@ -226,27 +351,28 @@ identity_mapped:
 	movl    %ecx,   %esi /* For every source page do a copy */
 	andl    $0xfffff000, %esi
 
+	movl	%edi, %eax
+	movl	%esi, %ebp
+
+	movl	%edx, %edi
 	movl    $1024, %ecx
 	rep ; movsl
-	jmp     0b
 
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * I need to execute a serializing instruction here.
-	 * So I flush the TLB, it's handy, and not processor dependent.
-	 */
-	xorl	%eax, %eax
-	movl	%eax, %cr3
+	movl	%ebp, %edi
+	movl	%eax, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	/* set all of the registers to known values */
-	/* leave %esp alone */
+	movl	%eax, %edi
+	movl	%edx, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	xorl	%eax, %eax
-	xorl	%ebx, %ebx
-	xorl    %ecx, %ecx
-	xorl    %edx, %edx
-	xorl    %esi, %esi
-	xorl    %edi, %edi
-	xorl    %ebp, %ebp
+	lea	PAGE_SIZE(%ebp), %esi
+	jmp     0b
+3:
+	popl	%esi
+	popl	%edi
+	popl	%ebx
+	popl	%ebp
 	ret
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6f80b852a196..b520dae02bf4 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1,139 +1,885 @@
-#include <linux/kernel.h>
+/*
+ *  Copyright (C) 1995  Linus Torvalds
+ *
+ *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ *
+ *  Memory region support
+ *	David Parsons <orc@pell.chi.il.us>, July-August 1999
+ *
+ *  Added E820 sanitization routine (removes overlapping memory regions);
+ *  Brian Moyle <bmoyle@mvista.com>, February 2001
+ *
+ * Moved CPU detection code to cpu/${cpu}.c
+ *    Patrick Mochel <mochel@osdl.org>, March 2002
+ *
+ *  Provisions for empty E820 memory regions (reported by certain BIOSes).
+ *  Alex Achenbach <xela@slit.de>, December 2002.
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/screen_info.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
+#include <linux/apm_bios.h>
+#include <linux/initrd.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/mca.h>
+#include <linux/root_dev.h>
+#include <linux/highmem.h>
 #include <linux/module.h>
+#include <linux/efi.h>
 #include <linux/init.h>
-#include <linux/bootmem.h>
+#include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
+#include <linux/nodemask.h>
+#include <linux/kexec.h>
+#include <linux/dmi.h>
+#include <linux/pfn.h>
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+#include <linux/init_ohci1394_dma.h>
+#include <linux/kvm_para.h>
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/delay.h>
+
+#include <linux/kallsyms.h>
+#include <linux/cpufreq.h>
+#include <linux/dma-mapping.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+
 #include <linux/percpu.h>
-#include <asm/smp.h>
-#include <asm/percpu.h>
+#include <linux/crash_dump.h>
+
+#include <video/edid.h>
+
+#include <asm/mtrr.h>
+#include <asm/apic.h>
+#include <asm/e820.h>
+#include <asm/mpspec.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+#include <asm/efi.h>
 #include <asm/sections.h>
+#include <asm/dmi.h>
+#include <asm/io_apic.h>
+#include <asm/ist.h>
+#include <asm/vmi.h>
+#include <setup_arch.h>
+#include <asm/bios_ebda.h>
+#include <asm/cacheflush.h>
 #include <asm/processor.h>
-#include <asm/setup.h>
+#include <asm/bugs.h>
+
+#include <asm/system.h>
+#include <asm/vsyscall.h>
+#include <asm/smp.h>
+#include <asm/desc.h>
+#include <asm/dma.h>
+#include <asm/iommu.h>
+#include <asm/mmu_context.h>
+#include <asm/proto.h>
+
+#include <mach_apic.h>
+#include <asm/paravirt.h>
+
+#include <asm/percpu.h>
 #include <asm/topology.h>
-#include <asm/mpspec.h>
 #include <asm/apicdef.h>
+#ifdef CONFIG_X86_64
+#include <asm/numa_64.h>
+#endif
 
-#ifdef CONFIG_X86_LOCAL_APIC
-unsigned int num_processors;
-unsigned disabled_cpus __cpuinitdata;
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_physical_apicid = -1U;
-EXPORT_SYMBOL(boot_cpu_physical_apicid);
+#ifndef ARCH_SETUP
+#define ARCH_SETUP
+#endif
 
-DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+#ifndef CONFIG_DEBUG_BOOT_PARAMS
+struct boot_params __initdata boot_params;
+#else
+struct boot_params boot_params;
+#endif
 
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map;
+/*
+ * Machine setup..
+ */
+static struct resource data_resource = {
+	.name	= "Kernel data",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+	.name	= "Kernel code",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource bss_resource = {
+	.name	= "Kernel bss",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+
+#ifdef CONFIG_X86_32
+/* This value is set up by the early boot code to point to the value
+   immediately after the boot time page tables.  It contains a *physical*
+   address, and must not be in the .bss segment! */
+unsigned long init_pg_tables_start __initdata = ~0UL;
+unsigned long init_pg_tables_end __initdata = ~0UL;
+
+static struct resource video_ram_resource = {
+	.name	= "Video RAM area",
+	.start	= 0xa0000,
+	.end	= 0xbffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+/* cpu data as detected by the assembly code in head.S */
+struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1};
+/* common cpu data for all cpus */
+struct cpuinfo_x86 boot_cpu_data __read_mostly = {0, 0, 0, 0, -1, 1, 0, 0, -1};
+EXPORT_SYMBOL(boot_cpu_data);
+static void set_mca_bus(int x)
+{
+#ifdef CONFIG_MCA
+	MCA_bus = x;
+#endif
+}
+
+unsigned int def_to_bigsmp;
+
+/* for MCA, but anyone else can use it if they want */
+unsigned int machine_id;
+unsigned int machine_submodel_id;
+unsigned int BIOS_revision;
+
+struct apm_info apm_info;
+EXPORT_SYMBOL(apm_info);
+
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
+	defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+struct ist_info ist_info;
+EXPORT_SYMBOL(ist_info);
+#else
+struct ist_info ist_info;
 #endif
 
-#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
+#else
+struct cpuinfo_x86 boot_cpu_data __read_mostly;
+EXPORT_SYMBOL(boot_cpu_data);
+#endif
+
+
+#if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
+unsigned long mmu_cr4_features;
+#else
+unsigned long mmu_cr4_features = X86_CR4_PAE;
+#endif
+
+/* Boot loader ID as an integer, for the benefit of proc_dointvec */
+int bootloader_type;
+
 /*
- * Copy data used in early init routines from the initial arrays to the
- * per cpu data areas.  These arrays then become expendable and the
- * *_early_ptr's are zeroed indicating that the static arrays are gone.
+ * Early DMI memory
  */
-static void __init setup_per_cpu_maps(void)
+int dmi_alloc_index;
+char dmi_alloc_data[DMI_MAX_DATA];
+
+/*
+ * Setup options
+ */
+struct screen_info screen_info;
+EXPORT_SYMBOL(screen_info);
+struct edid_info edid_info;
+EXPORT_SYMBOL_GPL(edid_info);
+
+extern int root_mountflags;
+
+unsigned long saved_video_mode;
+
+#define RAMDISK_IMAGE_START_MASK	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000
+
+static char __initdata command_line[COMMAND_LINE_SIZE];
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+struct edd edd;
+#ifdef CONFIG_EDD_MODULE
+EXPORT_SYMBOL(edd);
+#endif
+/**
+ * copy_edd() - Copy the BIOS EDD information
+ *              from boot_params into a safe place.
+ *
+ */
+static inline void copy_edd(void)
+{
+     memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
+	    sizeof(edd.mbr_signature));
+     memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
+     edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
+     edd.edd_info_nr = boot_params.eddbuf_entries;
+}
+#else
+static inline void copy_edd(void)
+{
+}
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+#ifdef CONFIG_X86_32
+
+#define MAX_MAP_CHUNK	(NR_FIX_BTMAPS << PAGE_SHIFT)
+static void __init relocate_initrd(void)
 {
-	int cpu;
 
-	for_each_possible_cpu(cpu) {
-		per_cpu(x86_cpu_to_apicid, cpu) = x86_cpu_to_apicid_init[cpu];
-		per_cpu(x86_bios_cpu_apicid, cpu) =
-						x86_bios_cpu_apicid_init[cpu];
-#ifdef CONFIG_NUMA
-		per_cpu(x86_cpu_to_node_map, cpu) =
-						x86_cpu_to_node_map_init[cpu];
+	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
+	u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+	u64 ramdisk_here;
+	unsigned long slop, clen, mapaddr;
+	char *p, *q;
+
+	/* We need to move the initrd down into lowmem */
+	ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size,
+					 PAGE_SIZE);
+
+	if (ramdisk_here == -1ULL)
+		panic("Cannot find place for new RAMDISK of size %lld\n",
+			 ramdisk_size);
+
+	/* Note: this includes all the lowmem currently occupied by
+	   the initrd, we rely on that fact to keep the data intact. */
+	reserve_early(ramdisk_here, ramdisk_here + ramdisk_size,
+			 "NEW RAMDISK");
+	initrd_start = ramdisk_here + PAGE_OFFSET;
+	initrd_end   = initrd_start + ramdisk_size;
+	printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
+			 ramdisk_here, ramdisk_here + ramdisk_size);
+
+	q = (char *)initrd_start;
+
+	/* Copy any lowmem portion of the initrd */
+	if (ramdisk_image < end_of_lowmem) {
+		clen = end_of_lowmem - ramdisk_image;
+		p = (char *)__va(ramdisk_image);
+		memcpy(q, p, clen);
+		q += clen;
+		ramdisk_image += clen;
+		ramdisk_size  -= clen;
+	}
+
+	/* Copy the highmem portion of the initrd */
+	while (ramdisk_size) {
+		slop = ramdisk_image & ~PAGE_MASK;
+		clen = ramdisk_size;
+		if (clen > MAX_MAP_CHUNK-slop)
+			clen = MAX_MAP_CHUNK-slop;
+		mapaddr = ramdisk_image & PAGE_MASK;
+		p = early_ioremap(mapaddr, clen+slop);
+		memcpy(q, p+slop, clen);
+		early_iounmap(p, clen+slop);
+		q += clen;
+		ramdisk_image += clen;
+		ramdisk_size  -= clen;
+	}
+	/* high pages is not converted by early_res_to_bootmem */
+	ramdisk_image = boot_params.hdr.ramdisk_image;
+	ramdisk_size  = boot_params.hdr.ramdisk_size;
+	printk(KERN_INFO "Move RAMDISK from %016llx - %016llx to"
+		" %08llx - %08llx\n",
+		ramdisk_image, ramdisk_image + ramdisk_size - 1,
+		ramdisk_here, ramdisk_here + ramdisk_size - 1);
+}
 #endif
+
+static void __init reserve_initrd(void)
+{
+	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
+	u64 ramdisk_end   = ramdisk_image + ramdisk_size;
+	u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+
+	if (!boot_params.hdr.type_of_loader ||
+	    !ramdisk_image || !ramdisk_size)
+		return;		/* No initrd provided by bootloader */
+
+	initrd_start = 0;
+
+	if (ramdisk_size >= (end_of_lowmem>>1)) {
+		free_early(ramdisk_image, ramdisk_end);
+		printk(KERN_ERR "initrd too large to handle, "
+		       "disabling initrd\n");
+		return;
+	}
+
+	printk(KERN_INFO "RAMDISK: %08llx - %08llx\n", ramdisk_image,
+			ramdisk_end);
+
+
+	if (ramdisk_end <= end_of_lowmem) {
+		/* All in lowmem, easy case */
+		/*
+		 * don't need to reserve again, already reserved early
+		 * in i386_start_kernel
+		 */
+		initrd_start = ramdisk_image + PAGE_OFFSET;
+		initrd_end = initrd_start + ramdisk_size;
+		return;
 	}
 
-	/* indicate the early static arrays will soon be gone */
-	x86_cpu_to_apicid_early_ptr = NULL;
-	x86_bios_cpu_apicid_early_ptr = NULL;
-#ifdef CONFIG_NUMA
-	x86_cpu_to_node_map_early_ptr = NULL;
+#ifdef CONFIG_X86_32
+	relocate_initrd();
+#else
+	printk(KERN_ERR "initrd extends beyond end of memory "
+	       "(0x%08llx > 0x%08llx)\ndisabling initrd\n",
+	       ramdisk_end, end_of_lowmem);
+	initrd_start = 0;
 #endif
+	free_early(ramdisk_image, ramdisk_end);
 }
+#else
+static void __init reserve_initrd(void)
+{
+}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+static void __init parse_setup_data(void)
+{
+	struct setup_data *data;
+	u64 pa_data;
+
+	if (boot_params.hdr.version < 0x0209)
+		return;
+	pa_data = boot_params.hdr.setup_data;
+	while (pa_data) {
+		data = early_ioremap(pa_data, PAGE_SIZE);
+		switch (data->type) {
+		case SETUP_E820_EXT:
+			parse_e820_ext(data, pa_data);
+			break;
+		default:
+			break;
+		}
+		pa_data = data->next;
+		early_iounmap(data, PAGE_SIZE);
+	}
+}
+
+static void __init e820_reserve_setup_data(void)
+{
+	struct setup_data *data;
+	u64 pa_data;
+	int found = 0;
+
+	if (boot_params.hdr.version < 0x0209)
+		return;
+	pa_data = boot_params.hdr.setup_data;
+	while (pa_data) {
+		data = early_ioremap(pa_data, sizeof(*data));
+		e820_update_range(pa_data, sizeof(*data)+data->len,
+			 E820_RAM, E820_RESERVED_KERN);
+		found = 1;
+		pa_data = data->next;
+		early_iounmap(data, sizeof(*data));
+	}
+	if (!found)
+		return;
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-cpumask_t *cpumask_of_cpu_map __read_mostly;
-EXPORT_SYMBOL(cpumask_of_cpu_map);
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	memcpy(&e820_saved, &e820, sizeof(struct e820map));
+	printk(KERN_INFO "extended physical RAM map:\n");
+	e820_print_map("reserve setup_data");
+}
 
-/* requires nr_cpu_ids to be initialized */
-static void __init setup_cpumask_of_cpu(void)
+static void __init reserve_early_setup_data(void)
 {
-	int i;
+	struct setup_data *data;
+	u64 pa_data;
+	char buf[32];
+
+	if (boot_params.hdr.version < 0x0209)
+		return;
+	pa_data = boot_params.hdr.setup_data;
+	while (pa_data) {
+		data = early_ioremap(pa_data, sizeof(*data));
+		sprintf(buf, "setup data %x", data->type);
+		reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
+		pa_data = data->next;
+		early_iounmap(data, sizeof(*data));
+	}
+}
+
+/*
+ * --------- Crashkernel reservation ------------------------------
+ */
+
+#ifdef CONFIG_KEXEC
+
+/**
+ * Reserve @size bytes of crashkernel memory at any suitable offset.
+ *
+ * @size: Size of the crashkernel memory to reserve.
+ * Returns the base address on success, and -1ULL on failure.
+ */
+unsigned long long find_and_reserve_crashkernel(unsigned long long size)
+{
+	const unsigned long long alignment = 16<<20; 	/* 16M */
+	unsigned long long start = 0LL;
+
+	while (1) {
+		int ret;
+
+		start = find_e820_area(start, ULONG_MAX, size, alignment);
+		if (start == -1ULL)
+			return start;
+
+		/* try to reserve it */
+		ret = reserve_bootmem_generic(start, size, BOOTMEM_EXCLUSIVE);
+		if (ret >= 0)
+			return start;
 
-	/* alloc_bootmem zeroes memory */
-	cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
-	for (i = 0; i < nr_cpu_ids; i++)
-		cpu_set(i, cpumask_of_cpu_map[i]);
+		start += alignment;
+	}
+}
+
+static inline unsigned long long get_total_mem(void)
+{
+	unsigned long long total;
+
+	total = max_low_pfn - min_low_pfn;
+#ifdef CONFIG_HIGHMEM
+	total += highend_pfn - highstart_pfn;
+#endif
+
+	return total << PAGE_SHIFT;
+}
+
+static void __init reserve_crashkernel(void)
+{
+	unsigned long long total_mem;
+	unsigned long long crash_size, crash_base;
+	int ret;
+
+	total_mem = get_total_mem();
+
+	ret = parse_crashkernel(boot_command_line, total_mem,
+			&crash_size, &crash_base);
+	if (ret != 0 || crash_size <= 0)
+		return;
+
+	/* 0 means: find the address automatically */
+	if (crash_base <= 0) {
+		crash_base = find_and_reserve_crashkernel(crash_size);
+		if (crash_base == -1ULL) {
+			pr_info("crashkernel reservation failed. "
+				"No suitable area found.\n");
+			return;
+		}
+	} else {
+		ret = reserve_bootmem_generic(crash_base, crash_size,
+					BOOTMEM_EXCLUSIVE);
+		if (ret < 0) {
+			pr_info("crashkernel reservation failed - "
+				"memory is in use\n");
+			return;
+		}
+	}
+
+	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+			"for crashkernel (System RAM: %ldMB)\n",
+			(unsigned long)(crash_size >> 20),
+			(unsigned long)(crash_base >> 20),
+			(unsigned long)(total_mem >> 20));
+
+	crashk_res.start = crash_base;
+	crashk_res.end   = crash_base + crash_size - 1;
+	insert_resource(&iomem_resource, &crashk_res);
 }
 #else
-static inline void setup_cpumask_of_cpu(void) { }
+static void __init reserve_crashkernel(void)
+{
+}
 #endif
 
-#ifdef CONFIG_X86_32
-/*
- * Great future not-so-futuristic plan: make i386 and x86_64 do it
- * the same way
+static struct resource standard_io_resources[] = {
+	{ .name = "dma1", .start = 0x00, .end = 0x1f,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "pic1", .start = 0x20, .end = 0x21,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "timer0", .start = 0x40, .end = 0x43,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "timer1", .start = 0x50, .end = 0x53,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "keyboard", .start = 0x60, .end = 0x60,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "keyboard", .start = 0x64, .end = 0x64,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "pic2", .start = 0xa0, .end = 0xa1,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "dma2", .start = 0xc0, .end = 0xdf,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "fpu", .start = 0xf0, .end = 0xff,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO }
+};
+
+static void __init reserve_standard_io_resources(void)
+{
+	int i;
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
+		request_resource(&ioport_resource, &standard_io_resources[i]);
+
+}
+
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel. This option will be passed
+ * by kexec loader to the capture kernel.
  */
-unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
-EXPORT_SYMBOL(__per_cpu_offset);
+static int __init setup_elfcorehdr(char *arg)
+{
+	char *end;
+	if (!arg)
+		return -EINVAL;
+	elfcorehdr_addr = memparse(arg, &end);
+	return end > arg ? 0 : -EINVAL;
+}
+early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
+static struct x86_quirks default_x86_quirks __initdata;
+
+struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
+
+/*
+ * Determine if we were loaded by an EFI loader.  If so, then we have also been
+ * passed the efi memmap, systab, etc., so we should use these data structures
+ * for initialization.  Note, the efi init code path is determined by the
+ * global efi_enabled. This allows the same kernel image to be used on existing
+ * systems (with a traditional BIOS) as well as on EFI systems.
+ */
 /*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
+ * setup_arch - architecture-specific boot-time initializations
+ *
+ * Note: On x86_64, fixmaps are ready for use even before this is called.
  */
-void __init setup_per_cpu_areas(void)
+
+void __init setup_arch(char **cmdline_p)
 {
-	int i, highest_cpu = 0;
-	unsigned long size;
+#ifdef CONFIG_X86_32
+	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
+	visws_early_detect();
+	pre_setup_arch_hook();
+#else
+	printk(KERN_INFO "Command line: %s\n", boot_command_line);
+#endif
 
-#ifdef CONFIG_HOTPLUG_CPU
-	prefill_possible_map();
+	early_cpu_init();
+	early_ioremap_init();
+
+	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
+	screen_info = boot_params.screen_info;
+	edid_info = boot_params.edid_info;
+#ifdef CONFIG_X86_32
+	apm_info.bios = boot_params.apm_bios_info;
+	ist_info = boot_params.ist_info;
+	if (boot_params.sys_desc_table.length != 0) {
+		set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
+		machine_id = boot_params.sys_desc_table.table[0];
+		machine_submodel_id = boot_params.sys_desc_table.table[1];
+		BIOS_revision = boot_params.sys_desc_table.table[2];
+	}
+#endif
+	saved_video_mode = boot_params.hdr.vid_mode;
+	bootloader_type = boot_params.hdr.type_of_loader;
+
+#ifdef CONFIG_BLK_DEV_RAM
+	rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
+	rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
+	rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
+#endif
+#ifdef CONFIG_EFI
+	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
+#ifdef CONFIG_X86_32
+		     "EL32",
+#else
+		     "EL64",
 #endif
+	 4)) {
+		efi_enabled = 1;
+		efi_reserve_early();
+	}
+#endif
+
+	ARCH_SETUP
+
+	setup_memory_map();
+	parse_setup_data();
+	/* update the e820_saved too */
+	e820_reserve_setup_data();
 
-	/* Copy section for each CPU (we discard the original) */
-	size = PERCPU_ENOUGH_ROOM;
-	printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n",
-			  size);
+	copy_edd();
 
-	for_each_possible_cpu(i) {
-		char *ptr;
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-		ptr = alloc_bootmem_pages(size);
+	if (!boot_params.hdr.root_flags)
+		root_mountflags &= ~MS_RDONLY;
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+#ifdef CONFIG_X86_32
+	init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
 #else
-		int node = early_cpu_to_node(i);
-		if (!node_online(node) || !NODE_DATA(node)) {
-			ptr = alloc_bootmem_pages(size);
-			printk(KERN_INFO
-			       "cpu %d has no node or node-local memory\n", i);
-		}
-		else
-			ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+	init_mm.brk = (unsigned long) &_end;
 #endif
-		if (!ptr)
-			panic("Cannot allocate cpu data for CPU %d\n", i);
-#ifdef CONFIG_X86_64
-		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
+
+	code_resource.start = virt_to_phys(_text);
+	code_resource.end = virt_to_phys(_etext)-1;
+	data_resource.start = virt_to_phys(_etext);
+	data_resource.end = virt_to_phys(_edata)-1;
+	bss_resource.start = virt_to_phys(&__bss_start);
+	bss_resource.end = virt_to_phys(&__bss_stop)-1;
+
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+	parse_early_param();
+
+	/* after early param, so could get panic from serial */
+	reserve_early_setup_data();
+
+	if (acpi_mps_check()) {
+#ifdef CONFIG_X86_LOCAL_APIC
+		disable_apic = 1;
+#endif
+		setup_clear_cpu_cap(X86_FEATURE_APIC);
+	}
+
+#ifdef CONFIG_PCI
+	if (pci_early_dump_regs)
+		early_dump_pci_devices();
+#endif
+
+	finish_e820_parsing();
+
+#ifdef CONFIG_X86_32
+	probe_roms();
+#endif
+
+	/* after parse_early_param, so could debug it */
+	insert_resource(&iomem_resource, &code_resource);
+	insert_resource(&iomem_resource, &data_resource);
+	insert_resource(&iomem_resource, &bss_resource);
+
+	if (efi_enabled)
+		efi_init();
+
+#ifdef CONFIG_X86_32
+	if (ppro_with_ram_bug()) {
+		e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
+				  E820_RESERVED);
+		sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+		printk(KERN_INFO "fixed physical RAM map:\n");
+		e820_print_map("bad_ppro");
+	}
+#else
+	early_gart_iommu_check();
+#endif
+
+	/*
+	 * partially used pages are not usable - thus
+	 * we are rounding upwards:
+	 */
+	max_pfn = e820_end_of_ram_pfn();
+
+	/* preallocate 4k for mptable mpc */
+	early_reserve_e820_mpc_new();
+	/* update e820 for memory not covered by WB MTRRs */
+	mtrr_bp_init();
+	if (mtrr_trim_uncached_memory(max_pfn))
+		max_pfn = e820_end_of_ram_pfn();
+
+#ifdef CONFIG_X86_32
+	/* max_low_pfn get updated here */
+	find_low_pfn_range();
 #else
-		__per_cpu_offset[i] = ptr - __per_cpu_start;
+	num_physpages = max_pfn;
+
+	check_efer();
+
+	/* How many end-of-memory variables you have, grandma! */
+	/* need this before calling reserve_initrd */
+	if (max_pfn > (1UL<<(32 - PAGE_SHIFT)))
+		max_low_pfn = e820_end_of_low_ram_pfn();
+	else
+		max_low_pfn = max_pfn;
+
+	high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
 #endif
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
 
-		highest_cpu = i;
+	/* max_pfn_mapped is updated here */
+	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
+	max_pfn_mapped = max_low_pfn_mapped;
+
+#ifdef CONFIG_X86_64
+	if (max_pfn > max_low_pfn) {
+		max_pfn_mapped = init_memory_mapping(1UL<<32,
+						     max_pfn<<PAGE_SHIFT);
+		/* can we preseve max_low_pfn ?*/
+		max_low_pfn = max_pfn;
 	}
+#endif
 
-	nr_cpu_ids = highest_cpu + 1;
-	printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d\n", NR_CPUS, nr_cpu_ids);
+	/*
+	 * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
+	 */
 
-	/* Setup percpu data maps */
-	setup_per_cpu_maps();
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	if (init_ohci1394_dma_early)
+		init_ohci1394_dma_on_all_controllers();
+#endif
 
-	/* Setup cpumask_of_cpu map */
-	setup_cpumask_of_cpu();
-}
+	reserve_initrd();
+
+#ifdef CONFIG_X86_64
+	vsmp_init();
+#endif
+
+	dmi_scan_machine();
+
+	io_delay_init();
+
+	/*
+	 * Parse the ACPI tables for possible boot-time SMP configuration.
+	 */
+	acpi_boot_table_init();
+
+#ifdef CONFIG_ACPI_NUMA
+	/*
+	 * Parse SRAT to discover nodes.
+	 */
+	acpi_numa_init();
+#endif
+
+	initmem_init(0, max_pfn);
+
+#ifdef CONFIG_X86_64
+	dma32_reserve_bootmem();
+#endif
 
+#ifdef CONFIG_ACPI_SLEEP
+	/*
+	 * Reserve low memory region for sleep support.
+	 */
+	acpi_reserve_bootmem();
 #endif
+#ifdef CONFIG_X86_FIND_SMP_CONFIG
+	/*
+	 * Find and reserve possible boot-time SMP configuration:
+	 */
+	find_smp_config();
+#endif
+	reserve_crashkernel();
+
+	reserve_ibft_region();
+
+#ifdef CONFIG_KVM_CLOCK
+	kvmclock_init();
+#endif
+
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
+	/*
+	 * Must be after max_low_pfn is determined, and before kernel
+	 * pagetables are setup.
+	 */
+	vmi_init();
+#endif
+
+	paravirt_pagetable_setup_start(swapper_pg_dir);
+	paging_init();
+	paravirt_pagetable_setup_done(swapper_pg_dir);
+	paravirt_post_allocator_init();
+
+#ifdef CONFIG_X86_64
+	map_vsyscall();
+#endif
+
+#ifdef CONFIG_X86_GENERICARCH
+	generic_apic_probe();
+#endif
+
+	early_quirks();
+
+	/*
+	 * Read APIC and some other early information from ACPI tables.
+	 */
+	acpi_boot_init();
+
+#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
+	/*
+	 * get boot-time SMP configuration:
+	 */
+	if (smp_found_config)
+		get_smp_config();
+#endif
+
+	prefill_possible_map();
+#ifdef CONFIG_X86_64
+	init_cpu_to_node();
+#endif
+
+	init_apic_mappings();
+	ioapic_init_mappings();
+
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
+	if (def_to_bigsmp)
+		printk(KERN_WARNING "More than 8 CPUs detected and "
+			"CONFIG_X86_PC cannot handle it.\nUse "
+			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
+#endif
+	kvm_guest_init();
+
+	e820_reserve_resources();
+	e820_mark_nosave_regions(max_low_pfn);
+
+#ifdef CONFIG_X86_32
+	request_resource(&iomem_resource, &video_ram_resource);
+#endif
+	reserve_standard_io_resources();
+
+	e820_setup_gap();
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+		conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+}
diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c
deleted file mode 100644
index aee0e8200777..000000000000
--- a/arch/x86/kernel/setup64.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/* 
- * X86-64 specific CPU setup.
- * Copyright (C) 1995  Linus Torvalds
- * Copyright 2001, 2002, 2003 SuSE Labs / Andi Kleen.
- * See setup.c for older changelog.
- */ 
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kgdb.h>
-#include <asm/pda.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/i387.h>
-#include <asm/percpu.h>
-#include <asm/proto.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/genapic.h>
-
-#ifndef CONFIG_DEBUG_BOOT_PARAMS
-struct boot_params __initdata boot_params;
-#else
-struct boot_params boot_params;
-#endif
-
-cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
-
-struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly;
-EXPORT_SYMBOL(_cpu_pda);
-struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
-
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
-
-char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned")));
-
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
-EXPORT_SYMBOL_GPL(__supported_pte_mask);
-
-static int do_not_nx __cpuinitdata = 0;
-
-/* noexec=on|off
-Control non executable mappings for 64bit processes.
-
-on	Enable(default)
-off	Disable
-*/ 
-static int __init nonx_setup(char *str)
-{
-	if (!str)
-		return -EINVAL;
-	if (!strncmp(str, "on", 2)) {
-                __supported_pte_mask |= _PAGE_NX; 
- 		do_not_nx = 0; 
-	} else if (!strncmp(str, "off", 3)) {
-		do_not_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
-        }
-	return 0;
-} 
-early_param("noexec", nonx_setup);
-
-int force_personality32 = 0; 
-
-/* noexec32=on|off
-Control non executable heap for 32bit processes.
-To control the stack too use noexec=off
-
-on	PROT_READ does not imply PROT_EXEC for 32bit processes (default)
-off	PROT_READ implies PROT_EXEC
-*/
-static int __init nonx32_setup(char *str)
-{
-	if (!strcmp(str, "on"))
-		force_personality32 &= ~READ_IMPLIES_EXEC;
-	else if (!strcmp(str, "off"))
-		force_personality32 |= READ_IMPLIES_EXEC;
-	return 1;
-}
-__setup("noexec32=", nonx32_setup);
-
-void pda_init(int cpu)
-{ 
-	struct x8664_pda *pda = cpu_pda(cpu);
-
-	/* Setup up data that may be needed in __get_free_pages early */
-	asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); 
-	/* Memory clobbers used to order PDA accessed */
-	mb();
-	wrmsrl(MSR_GS_BASE, pda);
-	mb();
-
-	pda->cpunumber = cpu; 
-	pda->irqcount = -1;
-	pda->kernelstack = 
-		(unsigned long)stack_thread_info() - PDA_STACKOFFSET + THREAD_SIZE; 
-	pda->active_mm = &init_mm;
-	pda->mmu_state = 0;
-
-	if (cpu == 0) {
-		/* others are initialized in smpboot.c */
-		pda->pcurrent = &init_task;
-		pda->irqstackptr = boot_cpu_stack; 
-	} else {
-		pda->irqstackptr = (char *)
-			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-		if (!pda->irqstackptr)
-			panic("cannot allocate irqstack for cpu %d", cpu); 
-	}
-
-
-	pda->irqstackptr += IRQSTACKSIZE-64;
-} 
-
-char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]
-__attribute__((section(".bss.page_aligned")));
-
-extern asmlinkage void ignore_sysret(void);
-
-/* May not be marked __init: used by software suspend */
-void syscall_init(void)
-{
-	/* 
-	 * LSTAR and STAR live in a bit strange symbiosis.
-	 * They both write to the same internal register. STAR allows to set CS/DS
-	 * but only a 32bit target. LSTAR sets the 64bit rip. 	 
-	 */ 
-	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32); 
-	wrmsrl(MSR_LSTAR, system_call); 
-	wrmsrl(MSR_CSTAR, ignore_sysret);
-
-#ifdef CONFIG_IA32_EMULATION   		
-	syscall32_cpu_init ();
-#endif
-
-	/* Flags to clear on syscall */
-	wrmsrl(MSR_SYSCALL_MASK,
-	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
-}
-
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer); 
-        if (!(efer & EFER_NX) || do_not_nx) { 
-                __supported_pte_mask &= ~_PAGE_NX; 
-        }       
-}
-
-unsigned long kernel_eflags;
-
-/*
- * Copies of the original ist values from the tss are only accessed during
- * debugging, no special alignment required.
- */
-DEFINE_PER_CPU(struct orig_ist, orig_ist);
-
-/*
- * cpu_init() initializes state that is per-CPU. Some data is already
- * initialized (naturally) in the bootstrap process, such as the GDT
- * and IDT. We reload them nevertheless, this function acts as a
- * 'CPU state barrier', nothing should get across.
- * A lot of state is already set up in PDA init.
- */
-void __cpuinit cpu_init (void)
-{
-	int cpu = stack_smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
-	unsigned long v; 
-	char *estacks = NULL; 
-	struct task_struct *me;
-	int i;
-
-	/* CPU 0 is initialised in head64.c */
-	if (cpu != 0) {
-		pda_init(cpu);
-	} else 
-		estacks = boot_exception_stacks; 
-
-	me = current;
-
-	if (cpu_test_and_set(cpu, cpu_initialized))
-		panic("CPU#%d already initialized!\n", cpu);
-
-	printk("Initializing CPU#%d\n", cpu);
-
-	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-
-	/*
-	 * Initialize the per-CPU GDT with the boot GDT,
-	 * and set up the GDT descriptor:
-	 */
-	if (cpu)
-		memcpy(get_cpu_gdt_table(cpu), cpu_gdt_table, GDT_SIZE);
-
-	cpu_gdt_descr[cpu].size = GDT_SIZE;
-	load_gdt((const struct desc_ptr *)&cpu_gdt_descr[cpu]);
-	load_idt((const struct desc_ptr *)&idt_descr);
-
-	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
-	syscall_init();
-
-	wrmsrl(MSR_FS_BASE, 0);
-	wrmsrl(MSR_KERNEL_GS_BASE, 0);
-	barrier(); 
-
-	check_efer();
-
-	/*
-	 * set up and load the per-CPU TSS
-	 */
-	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
-		static const unsigned int order[N_EXCEPTION_STACKS] = {
-			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
-		};
-		if (cpu) {
-			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-			if (!estacks)
-				panic("Cannot allocate exception stack %ld %d\n",
-				      v, cpu); 
-		}
-		estacks += PAGE_SIZE << order[v];
-		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
-	}
-
-	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
-	/*
-	 * <= is required because the CPU will access up to
-	 * 8 bits beyond the end of the IO permission bitmap.
-	 */
-	for (i = 0; i <= IO_BITMAP_LONGS; i++)
-		t->io_bitmap[i] = ~0UL;
-
-	atomic_inc(&init_mm.mm_count);
-	me->active_mm = &init_mm;
-	if (me->mm)
-		BUG();
-	enter_lazy_tlb(&init_mm, me);
-
-	set_tss_desc(cpu, t);
-	load_TR_desc();
-	load_LDT(&init_mm.context);
-
-#ifdef CONFIG_KGDB
-	/*
-	 * If the kgdb is connected no debug regs should be altered.  This
-	 * is only applicable when KGDB and a KGDB I/O module are built
-	 * into the kernel and you are using early debugging with
-	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
-	 */
-	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
-		arch_kgdb_ops.correct_hw_break();
-	else {
-#endif
-	/*
-	 * Clear all 6 debug registers:
-	 */
-
-	set_debugreg(0UL, 0);
-	set_debugreg(0UL, 1);
-	set_debugreg(0UL, 2);
-	set_debugreg(0UL, 3);
-	set_debugreg(0UL, 6);
-	set_debugreg(0UL, 7);
-#ifdef CONFIG_KGDB
-	/* If the kgdb is connected no debug regs should be altered. */
-	}
-#endif
-
-	fpu_init(); 
-
-	raw_local_save_flags(kernel_eflags);
-
-	if (is_uv_system())
-		uv_cpu_init();
-}
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
deleted file mode 100644
index 5a2f8e063887..000000000000
--- a/arch/x86/kernel/setup_32.c
+++ /dev/null
@@ -1,964 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *
- *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- *
- *  Memory region support
- *	David Parsons <orc@pell.chi.il.us>, July-August 1999
- *
- *  Added E820 sanitization routine (removes overlapping memory regions);
- *  Brian Moyle <bmoyle@mvista.com>, February 2001
- *
- * Moved CPU detection code to cpu/${cpu}.c
- *    Patrick Mochel <mochel@osdl.org>, March 2002
- *
- *  Provisions for empty E820 memory regions (reported by certain BIOSes).
- *  Alex Achenbach <xela@slit.de>, December 2002.
- *
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/acpi.h>
-#include <linux/apm_bios.h>
-#include <linux/initrd.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/mca.h>
-#include <linux/root_dev.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <linux/efi.h>
-#include <linux/init.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/nodemask.h>
-#include <linux/kexec.h>
-#include <linux/crash_dump.h>
-#include <linux/dmi.h>
-#include <linux/pfn.h>
-#include <linux/pci.h>
-#include <linux/init_ohci1394_dma.h>
-#include <linux/kvm_para.h>
-
-#include <video/edid.h>
-
-#include <asm/mtrr.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/mpspec.h>
-#include <asm/mmzone.h>
-#include <asm/setup.h>
-#include <asm/arch_hooks.h>
-#include <asm/sections.h>
-#include <asm/io_apic.h>
-#include <asm/ist.h>
-#include <asm/io.h>
-#include <asm/vmi.h>
-#include <setup_arch.h>
-#include <asm/bios_ebda.h>
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-
-/* This value is set up by the early boot code to point to the value
-   immediately after the boot time page tables.  It contains a *physical*
-   address, and must not be in the .bss segment! */
-unsigned long init_pg_tables_end __initdata = ~0UL;
-
-/*
- * Machine setup..
- */
-static struct resource data_resource = {
-	.name	= "Kernel data",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource code_resource = {
-	.name	= "Kernel code",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource bss_resource = {
-	.name	= "Kernel bss",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource video_ram_resource = {
-	.name	= "Video RAM area",
-	.start	= 0xa0000,
-	.end	= 0xbffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource standard_io_resources[] = { {
-	.name	= "dma1",
-	.start	= 0x0000,
-	.end	= 0x001f,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "pic1",
-	.start	= 0x0020,
-	.end	= 0x0021,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name   = "timer0",
-	.start	= 0x0040,
-	.end    = 0x0043,
-	.flags  = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name   = "timer1",
-	.start  = 0x0050,
-	.end    = 0x0053,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "keyboard",
-	.start	= 0x0060,
-	.end	= 0x0060,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "keyboard",
-	.start	= 0x0064,
-	.end	= 0x0064,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "dma page reg",
-	.start	= 0x0080,
-	.end	= 0x008f,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "pic2",
-	.start	= 0x00a0,
-	.end	= 0x00a1,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "dma2",
-	.start	= 0x00c0,
-	.end	= 0x00df,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "fpu",
-	.start	= 0x00f0,
-	.end	= 0x00ff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-} };
-
-/* cpu data as detected by the assembly code in head.S */
-struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-/* common cpu data for all cpus */
-struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-EXPORT_SYMBOL(boot_cpu_data);
-
-unsigned int def_to_bigsmp;
-
-#ifndef CONFIG_X86_PAE
-unsigned long mmu_cr4_features;
-#else
-unsigned long mmu_cr4_features = X86_CR4_PAE;
-#endif
-
-/* for MCA, but anyone else can use it if they want */
-unsigned int machine_id;
-unsigned int machine_submodel_id;
-unsigned int BIOS_revision;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-/* user-defined highmem size */
-static unsigned int highmem_pages = -1;
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct apm_info apm_info;
-EXPORT_SYMBOL(apm_info);
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-struct ist_info ist_info;
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
-	defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
-EXPORT_SYMBOL(ist_info);
-#endif
-
-extern void early_cpu_init(void);
-extern int root_mountflags;
-
-unsigned long saved_video_mode;
-
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-#define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
-
-#ifndef CONFIG_DEBUG_BOOT_PARAMS
-struct boot_params __initdata boot_params;
-#else
-struct boot_params boot_params;
-#endif
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- *              from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
-     memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
-	    sizeof(edd.mbr_signature));
-     memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
-     edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
-     edd.edd_info_nr = boot_params.eddbuf_entries;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-int __initdata user_defined_memmap;
-
-/*
- * "mem=nopentium" disables the 4MB page tables.
- * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
- * to <mem>, overriding the bios size.
- * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
- * <start> to <start>+<mem>, overriding the bios size.
- *
- * HPA tells me bootloaders need to parse mem=, so no new
- * option should be mem=  [also see Documentation/i386/boot.txt]
- */
-static int __init parse_mem(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp(arg, "nopentium") == 0) {
-		setup_clear_cpu_cap(X86_FEATURE_PSE);
-	} else {
-		/* If the user specifies memory size, we
-		 * limit the BIOS-provided memory map to
-		 * that size. exactmap can be used to specify
-		 * the exact map. mem=number can be used to
-		 * trim the existing memory map.
-		 */
-		unsigned long long mem_size;
-
-		mem_size = memparse(arg, &arg);
-		limit_regions(mem_size);
-		user_defined_memmap = 1;
-	}
-	return 0;
-}
-early_param("mem", parse_mem);
-
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
-static int __init parse_elfcorehdr(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	elfcorehdr_addr = memparse(arg, &arg);
-	return 0;
-}
-early_param("elfcorehdr", parse_elfcorehdr);
-#endif /* CONFIG_PROC_VMCORE */
-
-/*
- * highmem=size forces highmem to be exactly 'size' bytes.
- * This works even on boxes that have no highmem otherwise.
- * This also works to reduce highmem size on bigger boxes.
- */
-static int __init parse_highmem(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
-	return 0;
-}
-early_param("highmem", parse_highmem);
-
-/*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the
- * vmalloc area - the default is 128m.
- */
-static int __init parse_vmalloc(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	__VMALLOC_RESERVE = memparse(arg, &arg);
-	return 0;
-}
-early_param("vmalloc", parse_vmalloc);
-
-/*
- * reservetop=size reserves a hole at the top of the kernel address space which
- * a hypervisor can load into later.  Needed for dynamically loaded hypervisors,
- * so relocating the fixmap can be done before paging initialization.
- */
-static int __init parse_reservetop(char *arg)
-{
-	unsigned long address;
-
-	if (!arg)
-		return -EINVAL;
-
-	address = memparse(arg, &arg);
-	reserve_top_address(address);
-	return 0;
-}
-early_param("reservetop", parse_reservetop);
-
-/*
- * Determine low and high memory ranges:
- */
-unsigned long __init find_max_low_pfn(void)
-{
-	unsigned long max_low_pfn;
-
-	max_low_pfn = max_pfn;
-	if (max_low_pfn > MAXMEM_PFN) {
-		if (highmem_pages == -1)
-			highmem_pages = max_pfn - MAXMEM_PFN;
-		if (highmem_pages + MAXMEM_PFN < max_pfn)
-			max_pfn = MAXMEM_PFN + highmem_pages;
-		if (highmem_pages + MAXMEM_PFN > max_pfn) {
-			printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
-			highmem_pages = 0;
-		}
-		max_low_pfn = MAXMEM_PFN;
-#ifndef CONFIG_HIGHMEM
-		/* Maximum memory usable is what is directly addressable */
-		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
-					MAXMEM>>20);
-		if (max_pfn > MAX_NONPAE_PFN)
-			printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
-		else
-			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-		max_pfn = MAXMEM_PFN;
-#else /* !CONFIG_HIGHMEM */
-#ifndef CONFIG_HIGHMEM64G
-		if (max_pfn > MAX_NONPAE_PFN) {
-			max_pfn = MAX_NONPAE_PFN;
-			printk(KERN_WARNING "Warning only 4GB will be used.\n");
-			printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
-		}
-#endif /* !CONFIG_HIGHMEM64G */
-#endif /* !CONFIG_HIGHMEM */
-	} else {
-		if (highmem_pages == -1)
-			highmem_pages = 0;
-#ifdef CONFIG_HIGHMEM
-		if (highmem_pages >= max_pfn) {
-			printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
-			highmem_pages = 0;
-		}
-		if (highmem_pages) {
-			if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
-				printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
-				highmem_pages = 0;
-			}
-			max_low_pfn -= highmem_pages;
-		}
-#else
-		if (highmem_pages)
-			printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
-#endif
-	}
-	return max_low_pfn;
-}
-
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
-	unsigned int lowmem, ebda_addr;
-
-	/* To determine the position of the EBDA and the */
-	/* end of conventional memory, we need to look at */
-	/* the BIOS data area. In a paravirtual environment */
-	/* that area is absent. We'll just have to assume */
-	/* that the paravirt case can handle memory setup */
-	/* correctly, without our help. */
-	if (paravirt_enabled())
-		return;
-
-	/* end of low (conventional) memory */
-	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
-	lowmem <<= 10;
-
-	/* start of EBDA area */
-	ebda_addr = get_bios_ebda();
-
-	/* Fixup: bios puts an EBDA in the top 64K segment */
-	/* of conventional memory, but does not adjust lowmem. */
-	if ((lowmem - ebda_addr) <= 0x10000)
-		lowmem = ebda_addr;
-
-	/* Fixup: bios does not report an EBDA at all. */
-	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
-	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
-		lowmem = 0x9f000;
-
-	/* Paranoia: should never happen, but... */
-	if ((lowmem == 0) || (lowmem >= 0x100000))
-		lowmem = 0x9f000;
-
-	/* reserve all memory between lowmem and the 1MB mark */
-	reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT);
-}
-
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-static void __init setup_bootmem_allocator(void);
-static unsigned long __init setup_memory(void)
-{
-	/*
-	 * partially used pages are not usable - thus
-	 * we are rounding upwards:
-	 */
-	min_low_pfn = PFN_UP(init_pg_tables_end);
-
-	max_low_pfn = find_max_low_pfn();
-
-#ifdef CONFIG_HIGHMEM
-	highstart_pfn = highend_pfn = max_pfn;
-	if (max_pfn > max_low_pfn) {
-		highstart_pfn = max_low_pfn;
-	}
-	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
-		pages_to_mb(highend_pfn - highstart_pfn));
-	num_physpages = highend_pfn;
-	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
-#else
-	num_physpages = max_low_pfn;
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
-#endif
-#ifdef CONFIG_FLATMEM
-	max_mapnr = num_physpages;
-#endif
-	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
-			pages_to_mb(max_low_pfn));
-
-	setup_bootmem_allocator();
-
-	return max_low_pfn;
-}
-
-static void __init zone_sizes_init(void)
-{
-	unsigned long max_zone_pfns[MAX_NR_ZONES];
-	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] =
-		virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
-	add_active_range(0, 0, highend_pfn);
-#else
-	add_active_range(0, 0, max_low_pfn);
-#endif
-
-	free_area_init_nodes(max_zone_pfns);
-}
-#else
-extern unsigned long __init setup_memory(void);
-extern void zone_sizes_init(void);
-#endif /* !CONFIG_NEED_MULTIPLE_NODES */
-
-static inline unsigned long long get_total_mem(void)
-{
-	unsigned long long total;
-
-	total = max_low_pfn - min_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	total += highend_pfn - highstart_pfn;
-#endif
-
-	return total << PAGE_SHIFT;
-}
-
-#ifdef CONFIG_KEXEC
-static void __init reserve_crashkernel(void)
-{
-	unsigned long long total_mem;
-	unsigned long long crash_size, crash_base;
-	int ret;
-
-	total_mem = get_total_mem();
-
-	ret = parse_crashkernel(boot_command_line, total_mem,
-			&crash_size, &crash_base);
-	if (ret == 0 && crash_size > 0) {
-		if (crash_base > 0) {
-			printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
-					"for crashkernel (System RAM: %ldMB)\n",
-					(unsigned long)(crash_size >> 20),
-					(unsigned long)(crash_base >> 20),
-					(unsigned long)(total_mem >> 20));
-
-			if (reserve_bootmem(crash_base, crash_size,
-					BOOTMEM_EXCLUSIVE) < 0) {
-				printk(KERN_INFO "crashkernel reservation "
-					"failed - memory is in use\n");
-				return;
-			}
-
-			crashk_res.start = crash_base;
-			crashk_res.end   = crash_base + crash_size - 1;
-		} else
-			printk(KERN_INFO "crashkernel reservation failed - "
-					"you have to specify a base address\n");
-	}
-}
-#else
-static inline void __init reserve_crashkernel(void)
-{}
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-
-static bool do_relocate_initrd = false;
-
-static void __init reserve_initrd(void)
-{
-	unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
-	unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-	unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
-	unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
-	unsigned long ramdisk_here;
-
-	initrd_start = 0;
-
-	if (!boot_params.hdr.type_of_loader ||
-	    !ramdisk_image || !ramdisk_size)
-		return;		/* No initrd provided by bootloader */
-
-	if (ramdisk_end < ramdisk_image) {
-		printk(KERN_ERR "initrd wraps around end of memory, "
-		       "disabling initrd\n");
-		return;
-	}
-	if (ramdisk_size >= end_of_lowmem/2) {
-		printk(KERN_ERR "initrd too large to handle, "
-		       "disabling initrd\n");
-		return;
-	}
-	if (ramdisk_end <= end_of_lowmem) {
-		/* All in lowmem, easy case */
-		reserve_bootmem(ramdisk_image, ramdisk_size, BOOTMEM_DEFAULT);
-		initrd_start = ramdisk_image + PAGE_OFFSET;
-		initrd_end = initrd_start+ramdisk_size;
-		return;
-	}
-
-	/* We need to move the initrd down into lowmem */
-	ramdisk_here = (end_of_lowmem - ramdisk_size) & PAGE_MASK;
-
-	/* Note: this includes all the lowmem currently occupied by
-	   the initrd, we rely on that fact to keep the data intact. */
-	reserve_bootmem(ramdisk_here, ramdisk_size, BOOTMEM_DEFAULT);
-	initrd_start = ramdisk_here + PAGE_OFFSET;
-	initrd_end   = initrd_start + ramdisk_size;
-
-	do_relocate_initrd = true;
-}
-
-#define MAX_MAP_CHUNK	(NR_FIX_BTMAPS << PAGE_SHIFT)
-
-static void __init relocate_initrd(void)
-{
-	unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
-	unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-	unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
-	unsigned long ramdisk_here;
-	unsigned long slop, clen, mapaddr;
-	char *p, *q;
-
-	if (!do_relocate_initrd)
-		return;
-
-	ramdisk_here = initrd_start - PAGE_OFFSET;
-
-	q = (char *)initrd_start;
-
-	/* Copy any lowmem portion of the initrd */
-	if (ramdisk_image < end_of_lowmem) {
-		clen = end_of_lowmem - ramdisk_image;
-		p = (char *)__va(ramdisk_image);
-		memcpy(q, p, clen);
-		q += clen;
-		ramdisk_image += clen;
-		ramdisk_size  -= clen;
-	}
-
-	/* Copy the highmem portion of the initrd */
-	while (ramdisk_size) {
-		slop = ramdisk_image & ~PAGE_MASK;
-		clen = ramdisk_size;
-		if (clen > MAX_MAP_CHUNK-slop)
-			clen = MAX_MAP_CHUNK-slop;
-		mapaddr = ramdisk_image & PAGE_MASK;
-		p = early_ioremap(mapaddr, clen+slop);
-		memcpy(q, p+slop, clen);
-		early_iounmap(p, clen+slop);
-		q += clen;
-		ramdisk_image += clen;
-		ramdisk_size  -= clen;
-	}
-}
-
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-void __init setup_bootmem_allocator(void)
-{
-	unsigned long bootmap_size;
-	/*
-	 * Initialize the boot-time allocator (with low memory only):
-	 */
-	bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
-
-	register_bootmem_low_pages(max_low_pfn);
-
-	/*
-	 * Reserve the bootmem bitmap itself as well. We do this in two
-	 * steps (first step was init_bootmem()) because this catches
-	 * the (very unlikely) case of us accidentally initializing the
-	 * bootmem allocator with an invalid RAM area.
-	 */
-	reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
-			 bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text),
-			 BOOTMEM_DEFAULT);
-
-	/*
-	 * reserve physical page 0 - it's a special BIOS page on many boxes,
-	 * enabling clean reboots, SMP operation, laptop functions.
-	 */
-	reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
-
-	/* reserve EBDA region */
-	reserve_ebda_region();
-
-#ifdef CONFIG_SMP
-	/*
-	 * But first pinch a few for the stack/trampoline stuff
-	 * FIXME: Don't need the extra page at 4K, but need to fix
-	 * trampoline before removing it. (see the GDT stuff)
-	 */
-	reserve_bootmem(PAGE_SIZE, PAGE_SIZE, BOOTMEM_DEFAULT);
-#endif
-#ifdef CONFIG_ACPI_SLEEP
-	/*
-	 * Reserve low memory region for sleep support.
-	 */
-	acpi_reserve_bootmem();
-#endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
-	/*
-	 * Find and reserve possible boot-time SMP configuration:
-	 */
-	find_smp_config();
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	reserve_initrd();
-#endif
-	numa_kva_reserve();
-	reserve_crashkernel();
-
-	reserve_ibft_region();
-}
-
-/*
- * The node 0 pgdat is initialized before all of these because
- * it's needed for bootmem.  node>0 pgdats have their virtual
- * space allocated before the pagetables are in place to access
- * them, so they can't be cleared then.
- *
- * This should all compile down to nothing when NUMA is off.
- */
-static void __init remapped_pgdat_init(void)
-{
-	int nid;
-
-	for_each_online_node(nid) {
-		if (nid != 0)
-			memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
-	}
-}
-
-#ifdef CONFIG_MCA
-static void set_mca_bus(int x)
-{
-	MCA_bus = x;
-}
-#else
-static void set_mca_bus(int x) { }
-#endif
-
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-char * __init __attribute__((weak)) memory_setup(void)
-{
-	return machine_specific_memory_setup();
-}
-
-#ifdef CONFIG_NUMA
-/*
- * In the golden day, when everything among i386 and x86_64 will be
- * integrated, this will not live here
- */
-void *x86_cpu_to_node_map_early_ptr;
-int x86_cpu_to_node_map_init[NR_CPUS] = {
-	[0 ... NR_CPUS-1] = NUMA_NO_NODE
-};
-DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE;
-#endif
-
-/*
- * Determine if we were loaded by an EFI loader.  If so, then we have also been
- * passed the efi memmap, systab, etc., so we should use these data structures
- * for initialization.  Note, the efi init code path is determined by the
- * global efi_enabled. This allows the same kernel image to be used on existing
- * systems (with a traditional BIOS) as well as on EFI systems.
- */
-void __init setup_arch(char **cmdline_p)
-{
-	unsigned long max_low_pfn;
-
-	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
-	pre_setup_arch_hook();
-	early_cpu_init();
-	early_ioremap_init();
-
-#ifdef CONFIG_EFI
-	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
-		     "EL32", 4))
-		efi_enabled = 1;
-#endif
-
-	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
-	screen_info = boot_params.screen_info;
-	edid_info = boot_params.edid_info;
-	apm_info.bios = boot_params.apm_bios_info;
-	ist_info = boot_params.ist_info;
-	saved_video_mode = boot_params.hdr.vid_mode;
-	if( boot_params.sys_desc_table.length != 0 ) {
-		set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
-		machine_id = boot_params.sys_desc_table.table[0];
-		machine_submodel_id = boot_params.sys_desc_table.table[1];
-		BIOS_revision = boot_params.sys_desc_table.table[2];
-	}
-	bootloader_type = boot_params.hdr.type_of_loader;
-
-#ifdef CONFIG_BLK_DEV_RAM
-	rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
-	rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
-	rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
-#endif
-	ARCH_SETUP
-
-	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
-	print_memory_map(memory_setup());
-
-	copy_edd();
-
-	if (!boot_params.hdr.root_flags)
-		root_mountflags &= ~MS_RDONLY;
-	init_mm.start_code = (unsigned long) _text;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
-
-	code_resource.start = virt_to_phys(_text);
-	code_resource.end = virt_to_phys(_etext)-1;
-	data_resource.start = virt_to_phys(_etext);
-	data_resource.end = virt_to_phys(_edata)-1;
-	bss_resource.start = virt_to_phys(&__bss_start);
-	bss_resource.end = virt_to_phys(&__bss_stop)-1;
-
-	parse_early_param();
-
-	if (user_defined_memmap) {
-		printk(KERN_INFO "user-defined physical RAM map:\n");
-		print_memory_map("user");
-	}
-
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-	if (efi_enabled)
-		efi_init();
-
-	/* update e820 for memory not covered by WB MTRRs */
-	propagate_e820_map();
-	mtrr_bp_init();
-	if (mtrr_trim_uncached_memory(max_pfn))
-		propagate_e820_map();
-
-	max_low_pfn = setup_memory();
-
-#ifdef CONFIG_KVM_CLOCK
-	kvmclock_init();
-#endif
-
-#ifdef CONFIG_VMI
-	/*
-	 * Must be after max_low_pfn is determined, and before kernel
-	 * pagetables are setup.
-	 */
-	vmi_init();
-#endif
-	kvm_guest_init();
-
-	/*
-	 * NOTE: before this point _nobody_ is allowed to allocate
-	 * any memory using the bootmem allocator.  Although the
-	 * allocator is now initialised only the first 8Mb of the kernel
-	 * virtual address space has been mapped.  All allocations before
-	 * paging_init() has completed must use the alloc_bootmem_low_pages()
-	 * variant (which allocates DMA'able memory) and care must be taken
-	 * not to exceed the 8Mb limit.
-	 */
-
-#ifdef CONFIG_SMP
-	smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
-#endif
-	paging_init();
-
-	/*
-	 * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
-	 */
-
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	if (init_ohci1394_dma_early)
-		init_ohci1394_dma_on_all_controllers();
-#endif
-
-	remapped_pgdat_init();
-	sparse_init();
-	zone_sizes_init();
-
-	/*
-	 * NOTE: at this point the bootmem allocator is fully available.
-	 */
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	relocate_initrd();
-#endif
-
-	paravirt_post_allocator_init();
-
-	dmi_scan_machine();
-
-	io_delay_init();
-
-#ifdef CONFIG_X86_SMP
-	/*
-	 * setup to use the early static init tables during kernel startup
-	 * X86_SMP will exclude sub-arches that don't deal well with it.
-	 */
-	x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
-	x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
-#ifdef CONFIG_NUMA
-	x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
-#endif
-#endif
-
-#ifdef CONFIG_X86_GENERICARCH
-	generic_apic_probe();
-#endif
-
-#ifdef CONFIG_ACPI
-	/*
-	 * Parse the ACPI tables for possible boot-time SMP configuration.
-	 */
-	acpi_boot_table_init();
-#endif
-
-	early_quirks();
-
-#ifdef CONFIG_ACPI
-	acpi_boot_init();
-
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
-	if (def_to_bigsmp)
-		printk(KERN_WARNING "More than 8 CPUs detected and "
-			"CONFIG_X86_PC cannot handle it.\nUse "
-			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
-#endif
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
-	if (smp_found_config)
-		get_smp_config();
-#endif
-
-	e820_register_memory();
-	e820_mark_nosave_regions();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
-		conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-}
-
-/*
- * Request address space for all standard resources
- *
- * This is called just before pcibios_init(), which is also a
- * subsys_initcall, but is linked in later (in arch/i386/pci/common.c).
- */
-static int __init request_standard_resources(void)
-{
-	int i;
-
-	printk(KERN_INFO "Setting up standard PCI resources\n");
-	init_iomem_resources(&code_resource, &data_resource, &bss_resource);
-
-	request_resource(&iomem_resource, &video_ram_resource);
-
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
-		request_resource(&ioport_resource, &standard_io_resources[i]);
-	return 0;
-}
-
-subsys_initcall(request_standard_resources);
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
deleted file mode 100644
index 6dff1286ad8a..000000000000
--- a/arch/x86/kernel/setup_64.c
+++ /dev/null
@@ -1,1194 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/highmem.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <asm/processor.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/crash_dump.h>
-#include <linux/root_dev.h>
-#include <linux/pci.h>
-#include <asm/pci-direct.h>
-#include <linux/efi.h>
-#include <linux/acpi.h>
-#include <linux/kallsyms.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/mmzone.h>
-#include <linux/kexec.h>
-#include <linux/cpufreq.h>
-#include <linux/dmi.h>
-#include <linux/dma-mapping.h>
-#include <linux/ctype.h>
-#include <linux/sort.h>
-#include <linux/uaccess.h>
-#include <linux/init_ohci1394_dma.h>
-#include <linux/kvm_para.h>
-
-#include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/vsyscall.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/msr.h>
-#include <asm/desc.h>
-#include <video/edid.h>
-#include <asm/e820.h>
-#include <asm/dma.h>
-#include <asm/gart.h>
-#include <asm/mpspec.h>
-#include <asm/mmu_context.h>
-#include <asm/proto.h>
-#include <asm/setup.h>
-#include <asm/numa.h>
-#include <asm/sections.h>
-#include <asm/dmi.h>
-#include <asm/cacheflush.h>
-#include <asm/mce.h>
-#include <asm/ds.h>
-#include <asm/topology.h>
-#include <asm/trampoline.h>
-#include <asm/pat.h>
-
-#include <mach_apic.h>
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define ARCH_SETUP
-#endif
-
-/*
- * Machine setup..
- */
-
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
-EXPORT_SYMBOL(boot_cpu_data);
-
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
-unsigned long mmu_cr4_features;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-unsigned long saved_video_mode;
-
-int force_mwait __cpuinitdata;
-
-/*
- * Early DMI memory
- */
-int dmi_alloc_index;
-char dmi_alloc_data[DMI_MAX_DATA];
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct sys_desc_table_struct {
-	unsigned short length;
-	unsigned char table[0];
-};
-
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-
-extern int root_mountflags;
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-static struct resource standard_io_resources[] = {
-	{ .name = "dma1", .start = 0x00, .end = 0x1f,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "pic1", .start = 0x20, .end = 0x21,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "timer0", .start = 0x40, .end = 0x43,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "timer1", .start = 0x50, .end = 0x53,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "keyboard", .start = 0x60, .end = 0x60,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "keyboard", .start = 0x64, .end = 0x64,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "pic2", .start = 0xa0, .end = 0xa1,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "dma2", .start = 0xc0, .end = 0xdf,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "fpu", .start = 0xf0, .end = 0xff,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO }
-};
-
-#define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM)
-
-static struct resource data_resource = {
-	.name = "Kernel data",
-	.start = 0,
-	.end = 0,
-	.flags = IORESOURCE_RAM,
-};
-static struct resource code_resource = {
-	.name = "Kernel code",
-	.start = 0,
-	.end = 0,
-	.flags = IORESOURCE_RAM,
-};
-static struct resource bss_resource = {
-	.name = "Kernel bss",
-	.start = 0,
-	.end = 0,
-	.flags = IORESOURCE_RAM,
-};
-
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
-
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel. This option will be passed
- * by kexec loader to the capture kernel.
- */
-static int __init setup_elfcorehdr(char *arg)
-{
-	char *end;
-	if (!arg)
-		return -EINVAL;
-	elfcorehdr_addr = memparse(arg, &end);
-	return end > arg ? 0 : -EINVAL;
-}
-early_param("elfcorehdr", setup_elfcorehdr);
-#endif
-
-#ifndef CONFIG_NUMA
-static void __init
-contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
-{
-	unsigned long bootmap_size, bootmap;
-
-	bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
-	bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size,
-				 PAGE_SIZE);
-	if (bootmap == -1L)
-		panic("Cannot find bootmem map of size %ld\n", bootmap_size);
-	bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
-	e820_register_active_regions(0, start_pfn, end_pfn);
-	free_bootmem_with_active_regions(0, end_pfn);
-	early_res_to_bootmem(0, end_pfn<<PAGE_SHIFT);
-	reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
-}
-#endif
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- *              from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
-     memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
-	    sizeof(edd.mbr_signature));
-     memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
-     edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
-     edd.edd_info_nr = boot_params.eddbuf_entries;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-#ifdef CONFIG_KEXEC
-static void __init reserve_crashkernel(void)
-{
-	unsigned long long total_mem;
-	unsigned long long crash_size, crash_base;
-	int ret;
-
-	total_mem = ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT;
-
-	ret = parse_crashkernel(boot_command_line, total_mem,
-			&crash_size, &crash_base);
-	if (ret == 0 && crash_size) {
-		if (crash_base <= 0) {
-			printk(KERN_INFO "crashkernel reservation failed - "
-					"you have to specify a base address\n");
-			return;
-		}
-
-		if (reserve_bootmem(crash_base, crash_size,
-					BOOTMEM_EXCLUSIVE) < 0) {
-			printk(KERN_INFO "crashkernel reservation failed - "
-					"memory is in use\n");
-			return;
-		}
-
-		printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
-				"for crashkernel (System RAM: %ldMB)\n",
-				(unsigned long)(crash_size >> 20),
-				(unsigned long)(crash_base >> 20),
-				(unsigned long)(total_mem >> 20));
-		crashk_res.start = crash_base;
-		crashk_res.end   = crash_base + crash_size - 1;
-		insert_resource(&iomem_resource, &crashk_res);
-	}
-}
-#else
-static inline void __init reserve_crashkernel(void)
-{}
-#endif
-
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-void __attribute__((weak)) __init memory_setup(void)
-{
-       machine_specific_memory_setup();
-}
-
-static void __init parse_setup_data(void)
-{
-	struct setup_data *data;
-	unsigned long pa_data;
-
-	if (boot_params.hdr.version < 0x0209)
-		return;
-	pa_data = boot_params.hdr.setup_data;
-	while (pa_data) {
-		data = early_ioremap(pa_data, PAGE_SIZE);
-		switch (data->type) {
-		default:
-			break;
-		}
-#ifndef CONFIG_DEBUG_BOOT_PARAMS
-		free_early(pa_data, pa_data+sizeof(*data)+data->len);
-#endif
-		pa_data = data->next;
-		early_iounmap(data, PAGE_SIZE);
-	}
-}
-
-#ifdef CONFIG_PCI_MMCONFIG
-extern void __cpuinit fam10h_check_enable_mmcfg(void);
-extern void __init check_enable_amd_mmconf_dmi(void);
-#else
-void __cpuinit fam10h_check_enable_mmcfg(void)
-{
-}
-void __init check_enable_amd_mmconf_dmi(void)
-{
-}
-#endif
-
-/*
- * setup_arch - architecture-specific boot-time initializations
- *
- * Note: On x86_64, fixmaps are ready for use even before this is called.
- */
-void __init setup_arch(char **cmdline_p)
-{
-	unsigned i;
-
-	printk(KERN_INFO "Command line: %s\n", boot_command_line);
-
-	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
-	screen_info = boot_params.screen_info;
-	edid_info = boot_params.edid_info;
-	saved_video_mode = boot_params.hdr.vid_mode;
-	bootloader_type = boot_params.hdr.type_of_loader;
-
-#ifdef CONFIG_BLK_DEV_RAM
-	rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
-	rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
-	rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
-#endif
-#ifdef CONFIG_EFI
-	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
-		     "EL64", 4))
-		efi_enabled = 1;
-#endif
-
-	ARCH_SETUP
-
-	memory_setup();
-	copy_edd();
-
-	if (!boot_params.hdr.root_flags)
-		root_mountflags &= ~MS_RDONLY;
-	init_mm.start_code = (unsigned long) &_text;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) &_end;
-
-	code_resource.start = virt_to_phys(&_text);
-	code_resource.end = virt_to_phys(&_etext)-1;
-	data_resource.start = virt_to_phys(&_etext);
-	data_resource.end = virt_to_phys(&_edata)-1;
-	bss_resource.start = virt_to_phys(&__bss_start);
-	bss_resource.end = virt_to_phys(&__bss_stop)-1;
-
-	early_identify_cpu(&boot_cpu_data);
-
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-	parse_setup_data();
-
-	parse_early_param();
-
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	if (init_ohci1394_dma_early)
-		init_ohci1394_dma_on_all_controllers();
-#endif
-
-	finish_e820_parsing();
-
-	/* after parse_early_param, so could debug it */
-	insert_resource(&iomem_resource, &code_resource);
-	insert_resource(&iomem_resource, &data_resource);
-	insert_resource(&iomem_resource, &bss_resource);
-
-	early_gart_iommu_check();
-
-	e820_register_active_regions(0, 0, -1UL);
-	/*
-	 * partially used pages are not usable - thus
-	 * we are rounding upwards:
-	 */
-	end_pfn = e820_end_of_ram();
-	/* update e820 for memory not covered by WB MTRRs */
-	mtrr_bp_init();
-	if (mtrr_trim_uncached_memory(end_pfn)) {
-		e820_register_active_regions(0, 0, -1UL);
-		end_pfn = e820_end_of_ram();
-	}
-
-	num_physpages = end_pfn;
-
-	check_efer();
-
-	max_pfn_mapped = init_memory_mapping(0, (max_pfn_mapped << PAGE_SHIFT));
-	if (efi_enabled)
-		efi_init();
-
-	vsmp_init();
-
-	dmi_scan_machine();
-
-	io_delay_init();
-
-#ifdef CONFIG_KVM_CLOCK
-	kvmclock_init();
-#endif
-
-#ifdef CONFIG_SMP
-	/* setup to use the early static init tables during kernel startup */
-	x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
-	x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
-#ifdef CONFIG_NUMA
-	x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
-#endif
-#endif
-
-#ifdef CONFIG_ACPI
-	/*
-	 * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
-	 * Call this early for SRAT node setup.
-	 */
-	acpi_boot_table_init();
-#endif
-
-	/* How many end-of-memory variables you have, grandma! */
-	max_low_pfn = end_pfn;
-	max_pfn = end_pfn;
-	high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1;
-
-	/* Remove active ranges so rediscovery with NUMA-awareness happens */
-	remove_all_active_ranges();
-
-#ifdef CONFIG_ACPI_NUMA
-	/*
-	 * Parse SRAT to discover nodes.
-	 */
-	acpi_numa_init();
-#endif
-
-#ifdef CONFIG_NUMA
-	numa_initmem_init(0, end_pfn);
-#else
-	contig_initmem_init(0, end_pfn);
-#endif
-
-	dma32_reserve_bootmem();
-
-#ifdef CONFIG_ACPI_SLEEP
-	/*
-	 * Reserve low memory region for sleep support.
-	 */
-       acpi_reserve_bootmem();
-#endif
-
-	if (efi_enabled)
-		efi_reserve_bootmem();
-
-       /*
-	* Find and reserve possible boot-time SMP configuration:
-	*/
-	find_smp_config();
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
-		unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
-		unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-		unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
-		unsigned long end_of_mem    = end_pfn << PAGE_SHIFT;
-
-		if (ramdisk_end <= end_of_mem) {
-			/*
-			 * don't need to reserve again, already reserved early
-			 * in x86_64_start_kernel, and early_res_to_bootmem
-			 * convert that to reserved in bootmem
-			 */
-			initrd_start = ramdisk_image + PAGE_OFFSET;
-			initrd_end = initrd_start+ramdisk_size;
-		} else {
-			free_bootmem(ramdisk_image, ramdisk_size);
-			printk(KERN_ERR "initrd extends beyond end of memory "
-			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-			       ramdisk_end, end_of_mem);
-			initrd_start = 0;
-		}
-	}
-#endif
-	reserve_crashkernel();
-
-	reserve_ibft_region();
-
-	paging_init();
-	map_vsyscall();
-
-	early_quirks();
-
-#ifdef CONFIG_ACPI
-	/*
-	 * Read APIC and some other early information from ACPI tables.
-	 */
-	acpi_boot_init();
-#endif
-
-	init_cpu_to_node();
-
-	/*
-	 * get boot-time SMP configuration:
-	 */
-	if (smp_found_config)
-		get_smp_config();
-	init_apic_mappings();
-	ioapic_init_mappings();
-
-	kvm_guest_init();
-
-	/*
-	 * We trust e820 completely. No explicit ROM probing in memory.
-	 */
-	e820_reserve_resources();
-	e820_mark_nosave_regions();
-
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
-		request_resource(&ioport_resource, &standard_io_resources[i]);
-
-	e820_setup_gap();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
-		conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-
-	/* do this before identify_cpu for boot cpu */
-	check_enable_amd_mmconf_dmi();
-}
-
-static int __cpuinit get_model_name(struct cpuinfo_x86 *c)
-{
-	unsigned int *v;
-
-	if (c->extended_cpuid_level < 0x80000004)
-		return 0;
-
-	v = (unsigned int *) c->x86_model_id;
-	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
-	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
-	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
-	c->x86_model_id[48] = 0;
-	return 1;
-}
-
-
-static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
-{
-	unsigned int n, dummy, eax, ebx, ecx, edx;
-
-	n = c->extended_cpuid_level;
-
-	if (n >= 0x80000005) {
-		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
-		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
-		       "D cache %dK (%d bytes/line)\n",
-		       edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
-		c->x86_cache_size = (ecx>>24) + (edx>>24);
-		/* On K8 L1 TLB is inclusive, so don't count it */
-		c->x86_tlbsize = 0;
-	}
-
-	if (n >= 0x80000006) {
-		cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
-		ecx = cpuid_ecx(0x80000006);
-		c->x86_cache_size = ecx >> 16;
-		c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
-
-		printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-		c->x86_cache_size, ecx & 0xFF);
-	}
-	if (n >= 0x80000008) {
-		cpuid(0x80000008, &eax, &dummy, &dummy, &dummy);
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-	}
-}
-
-#ifdef CONFIG_NUMA
-static int __cpuinit nearby_node(int apicid)
-{
-	int i, node;
-
-	for (i = apicid - 1; i >= 0; i--) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits;
-#ifdef CONFIG_NUMA
-	int cpu = smp_processor_id();
-	int node = 0;
-	unsigned apicid = hard_smp_processor_id();
-#endif
-	bits = c->x86_coreid_bits;
-
-	/* Low order bits define the core id (index of core in socket) */
-	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
-	/* Convert the initial APIC ID into the socket ID */
-	c->phys_proc_id = c->initial_apicid >> bits;
-
-#ifdef CONFIG_NUMA
-	node = c->phys_proc_id;
-	if (apicid_to_node[apicid] != NUMA_NO_NODE)
-		node = apicid_to_node[apicid];
-	if (!node_online(node)) {
-		/* Two possibilities here:
-		   - The CPU is missing memory and no node was created.
-		   In that case try picking one from a nearby CPU
-		   - The APIC IDs differ from the HyperTransport node IDs
-		   which the K8 northbridge parsing fills in.
-		   Assume they are all increased by a constant offset,
-		   but in the same order as the HT nodeids.
-		   If that doesn't result in a usable node fall back to the
-		   path for the previous case.  */
-
-		int ht_nodeid = c->initial_apicid;
-
-		if (ht_nodeid >= 0 &&
-		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
-			node = apicid_to_node[ht_nodeid];
-		/* Pick a nearby node */
-		if (!node_online(node))
-			node = nearby_node(apicid);
-	}
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-#endif
-}
-
-static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits, ecx;
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level < 0x80000008)
-		return;
-
-	ecx = cpuid_ecx(0x80000008);
-
-	c->x86_max_cores = (ecx & 0xff) + 1;
-
-	/* CPU telling us the core id bits shift? */
-	bits = (ecx >> 12) & 0xF;
-
-	/* Otherwise recompute */
-	if (bits == 0) {
-		while ((1 << bits) < c->x86_max_cores)
-			bits++;
-	}
-
-	c->x86_coreid_bits = bits;
-
-#endif
-}
-
-#define ENABLE_C1E_MASK		0x18000000
-#define CPUID_PROCESSOR_SIGNATURE	1
-#define CPUID_XFAM		0x0ff00000
-#define CPUID_XFAM_K8		0x00000000
-#define CPUID_XFAM_10H		0x00100000
-#define CPUID_XFAM_11H		0x00200000
-#define CPUID_XMOD		0x000f0000
-#define CPUID_XMOD_REV_F	0x00040000
-
-/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
-static __cpuinit int amd_apic_timer_broken(void)
-{
-	u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-
-	switch (eax & CPUID_XFAM) {
-	case CPUID_XFAM_K8:
-		if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
-			break;
-	case CPUID_XFAM_10H:
-	case CPUID_XFAM_11H:
-		rdmsr(MSR_K8_ENABLE_C1E, lo, hi);
-		if (lo & ENABLE_C1E_MASK)
-			return 1;
-		break;
-	default:
-		/* err on the side of caution */
-		return 1;
-	}
-	return 0;
-}
-
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
-{
-	early_init_amd_mc(c);
-
- 	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
-	if (c->x86_power & (1<<8))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
-	unsigned level;
-
-#ifdef CONFIG_SMP
-	unsigned long value;
-
-	/*
-	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
-	 * bit 6 of msr C001_0015
-	 *
-	 * Errata 63 for SH-B3 steppings
-	 * Errata 122 for all steppings (F+ have it disabled by default)
-	 */
-	if (c->x86 == 15) {
-		rdmsrl(MSR_K8_HWCR, value);
-		value |= 1 << 6;
-		wrmsrl(MSR_K8_HWCR, value);
-	}
-#endif
-
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_cpu_cap(c, 0*32+31);
-
-	/* On C+ stepping K8 rep microcode works well for copy/memset */
-	level = cpuid_eax(1);
-	if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) ||
-			     level >= 0x0f58))
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	if (c->x86 == 0x10 || c->x86 == 0x11)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-
-	/* Enable workaround for FXSAVE leak */
-	if (c->x86 >= 6)
-		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
-
-	level = get_model_name(c);
-	if (!level) {
-		switch (c->x86) {
-		case 15:
-			/* Should distinguish Models here, but this is only
-			   a fallback anyways. */
-			strcpy(c->x86_model_id, "Hammer");
-			break;
-		}
-	}
-	display_cacheinfo(c);
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level >= 0x80000008)
-		amd_detect_cmp(c);
-
-	if (c->extended_cpuid_level >= 0x80000006 &&
-		(cpuid_edx(0x80000006) & 0xf000))
-		num_cache_leaves = 4;
-	else
-		num_cache_leaves = 3;
-
-	if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11)
-		set_cpu_cap(c, X86_FEATURE_K8);
-
-	/* MFENCE stops RDTSC speculation */
-	set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-
-	if (c->x86 == 0x10)
-		fam10h_check_enable_mmcfg();
-
-	if (amd_apic_timer_broken())
-		disable_apic_timer = 1;
-
-	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
-		unsigned long long tseg;
-
-		/*
-		 * Split up direct mapping around the TSEG SMM area.
-		 * Don't do it for gbpages because there seems very little
-		 * benefit in doing so.
-		 */
-		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) &&
-		(tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT)))
-			set_memory_4k((unsigned long)__va(tseg), 1);
-	}
-}
-
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	u32 eax, ebx, ecx, edx;
-	int index_msb, core_bits;
-
-	cpuid(1, &eax, &ebx, &ecx, &edx);
-
-
-	if (!cpu_has(c, X86_FEATURE_HT))
-		return;
-	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
-		goto out;
-
-	smp_num_siblings = (ebx & 0xff0000) >> 16;
-
-	if (smp_num_siblings == 1) {
-		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-	} else if (smp_num_siblings > 1) {
-
-		if (smp_num_siblings > NR_CPUS) {
-			printk(KERN_WARNING "CPU: Unsupported number of "
-			       "siblings %d", smp_num_siblings);
-			smp_num_siblings = 1;
-			return;
-		}
-
-		index_msb = get_count_order(smp_num_siblings);
-		c->phys_proc_id = phys_pkg_id(index_msb);
-
-		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
-		index_msb = get_count_order(smp_num_siblings);
-
-		core_bits = get_count_order(c->x86_max_cores);
-
-		c->cpu_core_id = phys_pkg_id(index_msb) &
-					       ((1 << core_bits) - 1);
-	}
-out:
-	if ((c->x86_max_cores * smp_num_siblings) > 1) {
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-		       c->phys_proc_id);
-		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
-		       c->cpu_core_id);
-	}
-
-#endif
-}
-
-/*
- * find out the number of processor cores on the die
- */
-static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
-{
-	unsigned int eax, t;
-
-	if (c->cpuid_level < 4)
-		return 1;
-
-	cpuid_count(4, 0, &eax, &t, &t, &t);
-
-	if (eax & 0x1f)
-		return ((eax >> 26) + 1);
-	else
-		return 1;
-}
-
-static void __cpuinit srat_detect_node(void)
-{
-#ifdef CONFIG_NUMA
-	unsigned node;
-	int cpu = smp_processor_id();
-	int apicid = hard_smp_processor_id();
-
-	/* Don't do the funky fallback heuristics the AMD version employs
-	   for now. */
-	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE || !node_online(node))
-		node = first_node(node_online_map);
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-}
-
-static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
-{
-	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
-	    (c->x86 == 0x6 && c->x86_model >= 0x0e))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-}
-
-static void __cpuinit init_intel(struct cpuinfo_x86 *c)
-{
-	/* Cache sizes */
-	unsigned n;
-
-	init_intel_cacheinfo(c);
-	if (c->cpuid_level > 9) {
-		unsigned eax = cpuid_eax(10);
-		/* Check for version and the number of counters */
-		if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
-			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
-	}
-
-	if (cpu_has_ds) {
-		unsigned int l1, l2;
-		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
-		if (!(l1 & (1<<11)))
-			set_cpu_cap(c, X86_FEATURE_BTS);
-		if (!(l1 & (1<<12)))
-			set_cpu_cap(c, X86_FEATURE_PEBS);
-	}
-
-
-	if (cpu_has_bts)
-		ds_init_intel(c);
-
-	n = c->extended_cpuid_level;
-	if (n >= 0x80000008) {
-		unsigned eax = cpuid_eax(0x80000008);
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-		/* CPUID workaround for Intel 0F34 CPU */
-		if (c->x86_vendor == X86_VENDOR_INTEL &&
-		    c->x86 == 0xF && c->x86_model == 0x3 &&
-		    c->x86_mask == 0x4)
-			c->x86_phys_bits = 36;
-	}
-
-	if (c->x86 == 15)
-		c->x86_cache_alignment = c->x86_clflush_size * 2;
-	if (c->x86 == 6)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-	c->x86_max_cores = intel_num_cpu_cores(c);
-
-	srat_detect_node();
-}
-
-static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
-{
-	if (c->x86 == 0x6 && c->x86_model >= 0xf)
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-}
-
-static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
-{
-	/* Cache sizes */
-	unsigned n;
-
-	n = c->extended_cpuid_level;
-	if (n >= 0x80000008) {
-		unsigned eax = cpuid_eax(0x80000008);
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-	}
-
-	if (c->x86 == 0x6 && c->x86_model >= 0xf) {
-		c->x86_cache_alignment = c->x86_clflush_size * 2;
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	}
-	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-}
-
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
-{
-	char *v = c->x86_vendor_id;
-
-	if (!strcmp(v, "AuthenticAMD"))
-		c->x86_vendor = X86_VENDOR_AMD;
-	else if (!strcmp(v, "GenuineIntel"))
-		c->x86_vendor = X86_VENDOR_INTEL;
-	else if (!strcmp(v, "CentaurHauls"))
-		c->x86_vendor = X86_VENDOR_CENTAUR;
-	else
-		c->x86_vendor = X86_VENDOR_UNKNOWN;
-}
-
-/* Do some early cpuid on the boot CPU to get some parameter that are
-   needed before check_bugs. Everything advanced is in identify_cpu
-   below. */
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
-{
-	u32 tfms, xlvl;
-
-	c->loops_per_jiffy = loops_per_jiffy;
-	c->x86_cache_size = -1;
-	c->x86_vendor = X86_VENDOR_UNKNOWN;
-	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
-	c->x86_vendor_id[0] = '\0'; /* Unset */
-	c->x86_model_id[0] = '\0';  /* Unset */
-	c->x86_clflush_size = 64;
-	c->x86_cache_alignment = c->x86_clflush_size;
-	c->x86_max_cores = 1;
-	c->x86_coreid_bits = 0;
-	c->extended_cpuid_level = 0;
-	memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
-	/* Get vendor name */
-	cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
-	      (unsigned int *)&c->x86_vendor_id[0],
-	      (unsigned int *)&c->x86_vendor_id[8],
-	      (unsigned int *)&c->x86_vendor_id[4]);
-
-	get_cpu_vendor(c);
-
-	/* Initialize the standard set of capabilities */
-	/* Note that the vendor-specific code below might override */
-
-	/* Intel-defined flags: level 0x00000001 */
-	if (c->cpuid_level >= 0x00000001) {
-		__u32 misc;
-		cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
-		      &c->x86_capability[0]);
-		c->x86 = (tfms >> 8) & 0xf;
-		c->x86_model = (tfms >> 4) & 0xf;
-		c->x86_mask = tfms & 0xf;
-		if (c->x86 == 0xf)
-			c->x86 += (tfms >> 20) & 0xff;
-		if (c->x86 >= 0x6)
-			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
-			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
-	} else {
-		/* Have CPUID level 0 only - unheard of */
-		c->x86 = 4;
-	}
-
-	c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
-#ifdef CONFIG_SMP
-	c->phys_proc_id = c->initial_apicid;
-#endif
-	/* AMD-defined flags: level 0x80000001 */
-	xlvl = cpuid_eax(0x80000000);
-	c->extended_cpuid_level = xlvl;
-	if ((xlvl & 0xffff0000) == 0x80000000) {
-		if (xlvl >= 0x80000001) {
-			c->x86_capability[1] = cpuid_edx(0x80000001);
-			c->x86_capability[6] = cpuid_ecx(0x80000001);
-		}
-		if (xlvl >= 0x80000004)
-			get_model_name(c); /* Default name */
-	}
-
-	/* Transmeta-defined flags: level 0x80860001 */
-	xlvl = cpuid_eax(0x80860000);
-	if ((xlvl & 0xffff0000) == 0x80860000) {
-		/* Don't set x86_cpuid_level here for now to not confuse. */
-		if (xlvl >= 0x80860001)
-			c->x86_capability[2] = cpuid_edx(0x80860001);
-	}
-
-	c->extended_cpuid_level = cpuid_eax(0x80000000);
-	if (c->extended_cpuid_level >= 0x80000007)
-		c->x86_power = cpuid_edx(0x80000007);
-
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		early_init_amd(c);
-		break;
-	case X86_VENDOR_INTEL:
-		early_init_intel(c);
-		break;
-	case X86_VENDOR_CENTAUR:
-		early_init_centaur(c);
-		break;
-	}
-
-	validate_pat_support(c);
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
-{
-	int i;
-
-	early_identify_cpu(c);
-
-	init_scattered_cpuid_features(c);
-
-	c->apicid = phys_pkg_id(0);
-
-	/*
-	 * Vendor-specific initialization.  In this section we
-	 * canonicalize the feature flags, meaning if there are
-	 * features a certain CPU supports which CPUID doesn't
-	 * tell us, CPUID claiming incorrect flags, or other bugs,
-	 * we handle them here.
-	 *
-	 * At the end of this section, c->x86_capability better
-	 * indicate the features this CPU genuinely supports!
-	 */
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		init_amd(c);
-		break;
-
-	case X86_VENDOR_INTEL:
-		init_intel(c);
-		break;
-
-	case X86_VENDOR_CENTAUR:
-		init_centaur(c);
-		break;
-
-	case X86_VENDOR_UNKNOWN:
-	default:
-		display_cacheinfo(c);
-		break;
-	}
-
-	detect_ht(c);
-
-	/*
-	 * On SMP, boot_cpu_data holds the common feature set between
-	 * all CPUs; so make sure that we indicate which features are
-	 * common between the CPUs.  The first time this routine gets
-	 * executed, c == &boot_cpu_data.
-	 */
-	if (c != &boot_cpu_data) {
-		/* AND the already accumulated flags with these */
-		for (i = 0; i < NCAPINTS; i++)
-			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
-	}
-
-	/* Clear all flags overriden by options */
-	for (i = 0; i < NCAPINTS; i++)
-		c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
-#ifdef CONFIG_X86_MCE
-	mcheck_init(c);
-#endif
-	select_idle_routine(c);
-
-#ifdef CONFIG_NUMA
-	numa_add_cpu(smp_processor_id());
-#endif
-
-}
-
-void __cpuinit identify_boot_cpu(void)
-{
-	identify_cpu(&boot_cpu_data);
-}
-
-void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
-{
-	BUG_ON(c == &boot_cpu_data);
-	identify_cpu(c);
-	mtrr_ap_init();
-}
-
-static __init int setup_noclflush(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
-	return 1;
-}
-__setup("noclflush", setup_noclflush);
-
-void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
-{
-	if (c->x86_model_id[0])
-		printk(KERN_CONT "%s", c->x86_model_id);
-
-	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(KERN_CONT " stepping %02x\n", c->x86_mask);
-	else
-		printk(KERN_CONT "\n");
-}
-
-static __init int setup_disablecpuid(char *arg)
-{
-	int bit;
-	if (get_option(&arg, &bit) && bit < NCAPINTS*32)
-		setup_clear_cpu_cap(bit);
-	else
-		return 0;
-	return 1;
-}
-__setup("clearcpuid=", setup_disablecpuid);
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
new file mode 100644
index 000000000000..f7745f94c006
--- /dev/null
+++ b/arch/x86/kernel/setup_percpu.c
@@ -0,0 +1,399 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/percpu.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+#include <asm/smp.h>
+#include <asm/percpu.h>
+#include <asm/sections.h>
+#include <asm/processor.h>
+#include <asm/setup.h>
+#include <asm/topology.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+#include <asm/highmem.h>
+
+#ifdef CONFIG_X86_LOCAL_APIC
+unsigned int num_processors;
+unsigned disabled_cpus __cpuinitdata;
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+unsigned int max_physical_apicid;
+EXPORT_SYMBOL(boot_cpu_physical_apicid);
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+#endif
+
+/* map cpu index to physical APIC ID */
+DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
+DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+#define	X86_64_NUMA	1
+
+/* map cpu index to node index */
+DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
+
+/* which logical CPUs are on which nodes */
+cpumask_t *node_to_cpumask_map;
+EXPORT_SYMBOL(node_to_cpumask_map);
+
+/* setup node_to_cpumask_map */
+static void __init setup_node_to_cpumask_map(void);
+
+#else
+static inline void setup_node_to_cpumask_map(void) { }
+#endif
+
+#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
+/*
+ * Copy data used in early init routines from the initial arrays to the
+ * per cpu data areas.  These arrays then become expendable and the
+ * *_early_ptr's are zeroed indicating that the static arrays are gone.
+ */
+static void __init setup_per_cpu_maps(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		per_cpu(x86_cpu_to_apicid, cpu) =
+				early_per_cpu_map(x86_cpu_to_apicid, cpu);
+		per_cpu(x86_bios_cpu_apicid, cpu) =
+				early_per_cpu_map(x86_bios_cpu_apicid, cpu);
+#ifdef X86_64_NUMA
+		per_cpu(x86_cpu_to_node_map, cpu) =
+				early_per_cpu_map(x86_cpu_to_node_map, cpu);
+#endif
+	}
+
+	/* indicate the early static arrays will soon be gone */
+	early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
+	early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
+#ifdef X86_64_NUMA
+	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
+#endif
+}
+
+#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
+cpumask_t *cpumask_of_cpu_map __read_mostly;
+EXPORT_SYMBOL(cpumask_of_cpu_map);
+
+/* requires nr_cpu_ids to be initialized */
+static void __init setup_cpumask_of_cpu(void)
+{
+	int i;
+
+	/* alloc_bootmem zeroes memory */
+	cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
+	for (i = 0; i < nr_cpu_ids; i++)
+		cpu_set(i, cpumask_of_cpu_map[i]);
+}
+#else
+static inline void setup_cpumask_of_cpu(void) { }
+#endif
+
+#ifdef CONFIG_X86_32
+/*
+ * Great future not-so-futuristic plan: make i386 and x86_64 do it
+ * the same way
+ */
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+static inline void setup_cpu_pda_map(void) { }
+
+#elif !defined(CONFIG_SMP)
+static inline void setup_cpu_pda_map(void) { }
+
+#else /* CONFIG_SMP && CONFIG_X86_64 */
+
+/*
+ * Allocate cpu_pda pointer table and array via alloc_bootmem.
+ */
+static void __init setup_cpu_pda_map(void)
+{
+	char *pda;
+	struct x8664_pda **new_cpu_pda;
+	unsigned long size;
+	int cpu;
+
+	size = roundup(sizeof(struct x8664_pda), cache_line_size());
+
+	/* allocate cpu_pda array and pointer table */
+	{
+		unsigned long tsize = nr_cpu_ids * sizeof(void *);
+		unsigned long asize = size * (nr_cpu_ids - 1);
+
+		tsize = roundup(tsize, cache_line_size());
+		new_cpu_pda = alloc_bootmem(tsize + asize);
+		pda = (char *)new_cpu_pda + tsize;
+	}
+
+	/* initialize pointer table to static pda's */
+	for_each_possible_cpu(cpu) {
+		if (cpu == 0) {
+			/* leave boot cpu pda in place */
+			new_cpu_pda[0] = cpu_pda(0);
+			continue;
+		}
+		new_cpu_pda[cpu] = (struct x8664_pda *)pda;
+		new_cpu_pda[cpu]->in_bootmem = 1;
+		pda += size;
+	}
+
+	/* point to new pointer table */
+	_cpu_pda = new_cpu_pda;
+}
+#endif
+
+/*
+ * Great future plan:
+ * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
+ * Always point %gs to its beginning
+ */
+void __init setup_per_cpu_areas(void)
+{
+	ssize_t size = PERCPU_ENOUGH_ROOM;
+	char *ptr;
+	int cpu;
+
+	/* Setup cpu_pda map */
+	setup_cpu_pda_map();
+
+	/* Copy section for each CPU (we discard the original) */
+	size = PERCPU_ENOUGH_ROOM;
+	printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
+			  size);
+
+	for_each_possible_cpu(cpu) {
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+		ptr = alloc_bootmem_pages(size);
+#else
+		int node = early_cpu_to_node(cpu);
+		if (!node_online(node) || !NODE_DATA(node)) {
+			ptr = alloc_bootmem_pages(size);
+			printk(KERN_INFO
+			       "cpu %d has no node %d or node-local memory\n",
+				cpu, node);
+		}
+		else
+			ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+#endif
+		per_cpu_offset(cpu) = ptr - __per_cpu_start;
+		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+
+	}
+
+	printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d, nr_node_ids %d\n",
+		NR_CPUS, nr_cpu_ids, nr_node_ids);
+
+	/* Setup percpu data maps */
+	setup_per_cpu_maps();
+
+	/* Setup node to cpumask map */
+	setup_node_to_cpumask_map();
+
+	/* Setup cpumask_of_cpu map */
+	setup_cpumask_of_cpu();
+}
+
+#endif
+
+#ifdef X86_64_NUMA
+
+/*
+ * Allocate node_to_cpumask_map based on number of available nodes
+ * Requires node_possible_map to be valid.
+ *
+ * Note: node_to_cpumask() is not valid until after this is done.
+ */
+static void __init setup_node_to_cpumask_map(void)
+{
+	unsigned int node, num = 0;
+	cpumask_t *map;
+
+	/* setup nr_node_ids if not done yet */
+	if (nr_node_ids == MAX_NUMNODES) {
+		for_each_node_mask(node, node_possible_map)
+			num = node;
+		nr_node_ids = num + 1;
+	}
+
+	/* allocate the map */
+	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
+
+	pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
+		 map, nr_node_ids);
+
+	/* node_to_cpumask() will now work */
+	node_to_cpumask_map = map;
+}
+
+void __cpuinit numa_set_node(int cpu, int node)
+{
+	int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
+
+	if (cpu_pda(cpu) && node != NUMA_NO_NODE)
+		cpu_pda(cpu)->nodenumber = node;
+
+	if (cpu_to_node_map)
+		cpu_to_node_map[cpu] = node;
+
+	else if (per_cpu_offset(cpu))
+		per_cpu(x86_cpu_to_node_map, cpu) = node;
+
+	else
+		pr_debug("Setting node for non-present cpu %d\n", cpu);
+}
+
+void __cpuinit numa_clear_node(int cpu)
+{
+	numa_set_node(cpu, NUMA_NO_NODE);
+}
+
+#ifndef CONFIG_DEBUG_PER_CPU_MAPS
+
+void __cpuinit numa_add_cpu(int cpu)
+{
+	cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
+}
+
+void __cpuinit numa_remove_cpu(int cpu)
+{
+	cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]);
+}
+
+#else /* CONFIG_DEBUG_PER_CPU_MAPS */
+
+/*
+ * --------- debug versions of the numa functions ---------
+ */
+static void __cpuinit numa_set_cpumask(int cpu, int enable)
+{
+	int node = cpu_to_node(cpu);
+	cpumask_t *mask;
+	char buf[64];
+
+	if (node_to_cpumask_map == NULL) {
+		printk(KERN_ERR "node_to_cpumask_map NULL\n");
+		dump_stack();
+		return;
+	}
+
+	mask = &node_to_cpumask_map[node];
+	if (enable)
+		cpu_set(cpu, *mask);
+	else
+		cpu_clear(cpu, *mask);
+
+	cpulist_scnprintf(buf, sizeof(buf), *mask);
+	printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
+		enable? "numa_add_cpu":"numa_remove_cpu", cpu, node, buf);
+ }
+
+void __cpuinit numa_add_cpu(int cpu)
+{
+	numa_set_cpumask(cpu, 1);
+}
+
+void __cpuinit numa_remove_cpu(int cpu)
+{
+	numa_set_cpumask(cpu, 0);
+}
+
+int cpu_to_node(int cpu)
+{
+	if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
+		printk(KERN_WARNING
+			"cpu_to_node(%d): usage too early!\n", cpu);
+		dump_stack();
+		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
+	}
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+EXPORT_SYMBOL(cpu_to_node);
+
+/*
+ * Same function as cpu_to_node() but used if called before the
+ * per_cpu areas are setup.
+ */
+int early_cpu_to_node(int cpu)
+{
+	if (early_per_cpu_ptr(x86_cpu_to_node_map))
+		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
+
+	if (!per_cpu_offset(cpu)) {
+		printk(KERN_WARNING
+			"early_cpu_to_node(%d): no per_cpu area!\n", cpu);
+		dump_stack();
+		return NUMA_NO_NODE;
+	}
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+
+
+/* empty cpumask */
+static const cpumask_t cpu_mask_none;
+
+/*
+ * Returns a pointer to the bitmask of CPUs on Node 'node'.
+ */
+const cpumask_t *_node_to_cpumask_ptr(int node)
+{
+	if (node_to_cpumask_map == NULL) {
+		printk(KERN_WARNING
+			"_node_to_cpumask_ptr(%d): no node_to_cpumask_map!\n",
+			node);
+		dump_stack();
+		return (const cpumask_t *)&cpu_online_map;
+	}
+	if (node >= nr_node_ids) {
+		printk(KERN_WARNING
+			"_node_to_cpumask_ptr(%d): node > nr_node_ids(%d)\n",
+			node, nr_node_ids);
+		dump_stack();
+		return &cpu_mask_none;
+	}
+	return &node_to_cpumask_map[node];
+}
+EXPORT_SYMBOL(_node_to_cpumask_ptr);
+
+/*
+ * Returns a bitmask of CPUs on Node 'node'.
+ *
+ * Side note: this function creates the returned cpumask on the stack
+ * so with a high NR_CPUS count, excessive stack space is used.  The
+ * node_to_cpumask_ptr function should be used whenever possible.
+ */
+cpumask_t node_to_cpumask(int node)
+{
+	if (node_to_cpumask_map == NULL) {
+		printk(KERN_WARNING
+			"node_to_cpumask(%d): no node_to_cpumask_map!\n", node);
+		dump_stack();
+		return cpu_online_map;
+	}
+	if (node >= nr_node_ids) {
+		printk(KERN_WARNING
+			"node_to_cpumask(%d): node > nr_node_ids(%d)\n",
+			node, nr_node_ids);
+		dump_stack();
+		return cpu_mask_none;
+	}
+	return node_to_cpumask_map[node];
+}
+EXPORT_SYMBOL(node_to_cpumask);
+
+/*
+ * --------- end of debug versions of the numa functions ---------
+ */
+
+#endif /* CONFIG_DEBUG_PER_CPU_MAPS */
+
+#endif /* X86_64_NUMA */
+
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index d92373630963..6fb5bcdd8933 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -212,7 +212,7 @@ asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
 
 badframe:
 	if (show_unhandled_signals && printk_ratelimit()) {
-		printk(KERN_INFO "%s%s[%d] bad frame in sigreturn frame:"
+		printk("%s%s[%d] bad frame in sigreturn frame:"
 			"%p ip:%lx sp:%lx oeax:%lx",
 		    task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
 		    current->comm, task_pid_nr(current), frame, regs->ip,
@@ -657,18 +657,9 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
-	/* Pending single-step? */
-	if (thread_info_flags & _TIF_SINGLESTEP) {
-		regs->flags |= X86_EFLAGS_TF;
-		clear_thread_flag(TIF_SINGLESTEP);
-	}
-
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
 
-	if (thread_info_flags & _TIF_HRTICK_RESCHED)
-		hrtick_resched();
-
 	clear_thread_flag(TIF_IRET);
 }
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index e53b267662e7..b45ef8ddd651 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -53,6 +53,59 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 	return do_sigaltstack(uss, uoss, regs->sp);
 }
 
+/*
+ * Signal frame handlers.
+ */
+
+static inline int save_i387(struct _fpstate __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err = 0;
+
+	BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
+			sizeof(tsk->thread.xstate->fxsave));
+
+	if ((unsigned long)buf % 16)
+		printk("save_i387: bad fpstate %p\n", buf);
+
+	if (!used_math())
+		return 0;
+	clear_used_math(); /* trigger finit */
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		err = save_i387_checking((struct i387_fxsave_struct __user *)
+					 buf);
+		if (err)
+			return err;
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		stts();
+	} else {
+		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
+				   sizeof(struct i387_fxsave_struct)))
+			return -1;
+	}
+	return 1;
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+static inline int restore_i387(struct _fpstate __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err;
+
+	if (!used_math()) {
+		err = init_fpu(tsk);
+		if (err)
+			return err;
+	}
+
+	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+		clts();
+		task_thread_info(current)->status |= TS_USEDFPU;
+	}
+	return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+}
 
 /*
  * Do a signal return; undo the signal stack.
@@ -487,12 +540,6 @@ static void do_signal(struct pt_regs *regs)
 void do_notify_resume(struct pt_regs *regs, void *unused,
 		      __u32 thread_info_flags)
 {
-	/* Pending single-step? */
-	if (thread_info_flags & _TIF_SINGLESTEP) {
-		regs->flags |= X86_EFLAGS_TF;
-		clear_thread_flag(TIF_SINGLESTEP);
-	}
-
 #ifdef CONFIG_X86_MCE
 	/* notify userspace of pending MCEs */
 	if (thread_info_flags & _TIF_MCE_NOTIFY)
@@ -502,9 +549,6 @@ void do_notify_resume(struct pt_regs *regs, void *unused,
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
-
-	if (thread_info_flags & _TIF_HRTICK_RESCHED)
-		hrtick_resched();
 }
 
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 0cb7aadc87cd..361b7a4c640c 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -121,132 +121,23 @@ static void native_smp_send_reschedule(int cpu)
 	send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
 }
 
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-};
-
-void lock_ipi_call_lock(void)
+void native_send_call_func_single_ipi(int cpu)
 {
-	spin_lock_irq(&call_lock);
-}
-
-void unlock_ipi_call_lock(void)
-{
-	spin_unlock_irq(&call_lock);
-}
-
-static struct call_data_struct *call_data;
-
-static void __smp_call_function(void (*func) (void *info), void *info,
-				int nonatomic, int wait)
-{
-	struct call_data_struct data;
-	int cpus = num_online_cpus() - 1;
-
-	if (!cpus)
-		return;
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb();
-
-	/* Send a message to all other CPUs and wait for them to respond */
-	send_IPI_allbutself(CALL_FUNCTION_VECTOR);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
+	send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_SINGLE_VECTOR);
 }
 
-
-/**
- * smp_call_function_mask(): Run a function on a set of other CPUs.
- * @mask: The set of cpus to run on.  Must not include the current cpu.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
-  * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-static int
-native_smp_call_function_mask(cpumask_t mask,
-			      void (*func)(void *), void *info,
-			      int wait)
+void native_send_call_func_ipi(cpumask_t mask)
 {
-	struct call_data_struct data;
 	cpumask_t allbutself;
-	int cpus;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	/* Holding any lock stops cpus from going down. */
-	spin_lock(&call_lock);
 
 	allbutself = cpu_online_map;
 	cpu_clear(smp_processor_id(), allbutself);
 
-	cpus_and(mask, mask, allbutself);
-	cpus = cpus_weight(mask);
-
-	if (!cpus) {
-		spin_unlock(&call_lock);
-		return 0;
-	}
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	wmb();
-
-	/* Send a message to other CPUs */
 	if (cpus_equal(mask, allbutself) &&
 	    cpus_equal(cpu_online_map, cpu_callout_map))
 		send_IPI_allbutself(CALL_FUNCTION_VECTOR);
 	else
 		send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-	spin_unlock(&call_lock);
-
-	return 0;
 }
 
 static void stop_this_cpu(void *dummy)
@@ -268,18 +159,13 @@ static void stop_this_cpu(void *dummy)
 
 static void native_smp_send_stop(void)
 {
-	int nolock;
 	unsigned long flags;
 
 	if (reboot_force)
 		return;
 
-	/* Don't deadlock on the call lock in panic */
-	nolock = !spin_trylock(&call_lock);
+	smp_call_function(stop_this_cpu, NULL, 0);
 	local_irq_save(flags);
-	__smp_call_function(stop_this_cpu, NULL, 0, 0);
-	if (!nolock)
-		spin_unlock(&call_lock);
 	disable_local_APIC();
 	local_irq_restore(flags);
 }
@@ -301,33 +187,28 @@ void smp_reschedule_interrupt(struct pt_regs *regs)
 
 void smp_call_function_interrupt(struct pt_regs *regs)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
 	ack_APIC_irq();
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
 	irq_enter();
-	(*func)(info);
+	generic_smp_call_function_interrupt();
 #ifdef CONFIG_X86_32
 	__get_cpu_var(irq_stat).irq_call_count++;
 #else
 	add_pda(irq_call_count, 1);
 #endif
 	irq_exit();
+}
 
-	if (wait) {
-		mb();
-		atomic_inc(&call_data->finished);
-	}
+void smp_call_function_single_interrupt(struct pt_regs *regs)
+{
+	ack_APIC_irq();
+	irq_enter();
+	generic_smp_call_function_single_interrupt();
+#ifdef CONFIG_X86_32
+	__get_cpu_var(irq_stat).irq_call_count++;
+#else
+	add_pda(irq_call_count, 1);
+#endif
+	irq_exit();
 }
 
 struct smp_ops smp_ops = {
@@ -338,7 +219,8 @@ struct smp_ops smp_ops = {
 
 	.smp_send_stop = native_smp_send_stop,
 	.smp_send_reschedule = native_smp_send_reschedule,
-	.smp_call_function_mask = native_smp_call_function_mask,
+
+	.send_call_func_ipi = native_send_call_func_ipi,
+	.send_call_func_single_ipi = native_send_call_func_single_ipi,
 };
 EXPORT_SYMBOL_GPL(smp_ops);
-
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3e1cecedde42..332512767f4f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -59,7 +59,6 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mtrr.h>
-#include <asm/nmi.h>
 #include <asm/vmi.h>
 #include <asm/genapic.h>
 #include <linux/mc146818rtc.h>
@@ -68,22 +67,6 @@
 #include <mach_wakecpu.h>
 #include <smpboot_hooks.h>
 
-/*
- * FIXME: For x86_64, those are defined in other files. But moving them here,
- * would make the setup areas dependent on smp, which is a loss. When we
- * integrate apic between arches, we can probably do a better job, but
- * right now, they'll stay here -- glommer
- */
-
-/* which logical CPU number maps to which CPU (physical APIC ID) */
-u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
-			{ [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_cpu_to_apicid_early_ptr;
-
-u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
-				= { [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_bios_cpu_apicid_early_ptr;
-
 #ifdef CONFIG_X86_32
 u8 apicid_2_node[MAX_APICID];
 static int low_mappings;
@@ -198,13 +181,12 @@ static void map_cpu_to_logical_apicid(void)
 	map_cpu_to_node(cpu, node);
 }
 
-static void unmap_cpu_to_logical_apicid(int cpu)
+void numa_remove_cpu(int cpu)
 {
 	cpu_2_logical_apicid[cpu] = BAD_APICID;
 	unmap_cpu_to_node(cpu);
 }
 #else
-#define unmap_cpu_to_logical_apicid(cpu) do {} while (0)
 #define map_cpu_to_logical_apicid()  do {} while (0)
 #endif
 
@@ -234,7 +216,7 @@ static void __cpuinit smp_callin(void)
 		panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
 					phys_id, cpuid);
 	}
-	Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
+	pr_debug("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
 
 	/*
 	 * STARTUP IPIs are fragile beasts as they might sometimes
@@ -269,7 +251,7 @@ static void __cpuinit smp_callin(void)
 	 * boards)
 	 */
 
-	Dprintk("CALLIN, before setup_local_APIC().\n");
+	pr_debug("CALLIN, before setup_local_APIC().\n");
 	smp_callin_clear_local_apic();
 	setup_local_APIC();
 	end_local_APIC_setup();
@@ -284,7 +266,7 @@ static void __cpuinit smp_callin(void)
 	local_irq_enable();
 	calibrate_delay();
 	local_irq_disable();
-	Dprintk("Stack at about %p\n", &cpuid);
+	pr_debug("Stack at about %p\n", &cpuid);
 
 	/*
 	 * Save our processor parameters
@@ -345,19 +327,12 @@ static void __cpuinit start_secondary(void *unused)
 	 * lock helps us to not include this cpu in a currently in progress
 	 * smp_call_function().
 	 */
-	lock_ipi_call_lock();
-#ifdef CONFIG_X86_64
-	spin_lock(&vector_lock);
-
-	/* Setup the per cpu irq handling data structures */
-	__setup_vector_irq(smp_processor_id());
-	/*
-	 * Allow the master to continue.
-	 */
-	spin_unlock(&vector_lock);
+	ipi_call_lock_irq();
+#ifdef CONFIG_X86_IO_APIC
+	setup_vector_irq(smp_processor_id());
 #endif
 	cpu_set(smp_processor_id(), cpu_online_map);
-	unlock_ipi_call_lock();
+	ipi_call_unlock_irq();
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 
 	setup_secondary_clock();
@@ -366,31 +341,8 @@ static void __cpuinit start_secondary(void *unused)
 	cpu_idle();
 }
 
-#ifdef CONFIG_X86_32
-/*
- * Everything has been set up for the secondary
- * CPUs - they just need to reload everything
- * from the task structure
- * This function must not return.
- */
-void __devinit initialize_secondary(void)
-{
-	/*
-	 * We don't actually need to load the full TSS,
-	 * basically just the stack pointer and the ip.
-	 */
-
-	asm volatile(
-		"movl %0,%%esp\n\t"
-		"jmp *%1"
-		:
-		:"m" (current->thread.sp), "m" (current->thread.ip));
-}
-#endif
-
 static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_32
 	/*
 	 * Mask B, Pentium, but not Pentium MMX
 	 */
@@ -440,7 +392,6 @@ static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c)
 
 valid_k7:
 	;
-#endif
 }
 
 static void __cpuinit smp_checks(void)
@@ -487,7 +438,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 	cpu_set(cpu, cpu_sibling_setup_map);
 
 	if (smp_num_siblings > 1) {
-		for_each_cpu_mask(i, cpu_sibling_setup_map) {
+		for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
 			if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
 			    c->cpu_core_id == cpu_data(i).cpu_core_id) {
 				cpu_set(i, per_cpu(cpu_sibling_map, cpu));
@@ -510,7 +461,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 		return;
 	}
 
-	for_each_cpu_mask(i, cpu_sibling_setup_map) {
+	for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
 		if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
 		    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
 			cpu_set(i, c->llc_shared_map);
@@ -555,23 +506,6 @@ cpumask_t cpu_coregroup_map(int cpu)
 		return c->llc_shared_map;
 }
 
-#ifdef CONFIG_X86_32
-/*
- * We are called very early to get the low memory for the
- * SMP bootup trampoline page.
- */
-void __init smp_alloc_memory(void)
-{
-	trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
-	/*
-	 * Has to be in very low memory so we can execute
-	 * real-mode AP code.
-	 */
-	if (__pa(trampoline_base) >= 0x9F000)
-		BUG();
-}
-#endif
-
 static void impress_friends(void)
 {
 	int cpu;
@@ -579,7 +513,7 @@ static void impress_friends(void)
 	/*
 	 * Allow the user to impress friends.
 	 */
-	Dprintk("Before bogomips.\n");
+	pr_debug("Before bogomips.\n");
 	for_each_possible_cpu(cpu)
 		if (cpu_isset(cpu, cpu_callout_map))
 			bogosum += cpu_data(cpu).loops_per_jiffy;
@@ -589,7 +523,7 @@ static void impress_friends(void)
 		bogosum/(500000/HZ),
 		(bogosum/(5000/HZ))%100);
 
-	Dprintk("Before bogocount - setting activated=1.\n");
+	pr_debug("Before bogocount - setting activated=1.\n");
 }
 
 static inline void __inquire_remote_apic(int apicid)
@@ -612,8 +546,8 @@ static inline void __inquire_remote_apic(int apicid)
 			printk(KERN_CONT
 			       "a previous APIC delivery may have failed\n");
 
-		apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-		apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
+		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
+		apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
 
 		timeout = 0;
 		do {
@@ -645,29 +579,24 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
 	int maxlvt;
 
 	/* Target chip */
-	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
 
 	/* Boot on the stack */
 	/* Kick the second */
-	apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+	apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
 
-	Dprintk("Waiting for send to finish...\n");
+	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
 	/*
 	 * Give the other CPU some time to accept the IPI.
 	 */
 	udelay(200);
-	/*
-	 * Due to the Pentium erratum 3AP.
-	 */
 	maxlvt = lapic_get_maxlvt();
-	if (maxlvt > 3) {
-		apic_read_around(APIC_SPIV);
+	if (maxlvt > 3)			/* Due to the Pentium erratum 3AP.  */
 		apic_write(APIC_ESR, 0);
-	}
 	accept_status = (apic_read(APIC_ESR) & 0xEF);
-	Dprintk("NMI sent.\n");
+	pr_debug("NMI sent.\n");
 
 	if (send_status)
 		printk(KERN_ERR "APIC never delivered???\n");
@@ -691,42 +620,44 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 		return send_status;
 	}
 
+	maxlvt = lapic_get_maxlvt();
+
 	/*
 	 * Be paranoid about clearing APIC errors.
 	 */
 	if (APIC_INTEGRATED(apic_version[phys_apicid])) {
-		apic_read_around(APIC_SPIV);
-		apic_write(APIC_ESR, 0);
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
+			apic_write(APIC_ESR, 0);
 		apic_read(APIC_ESR);
 	}
 
-	Dprintk("Asserting INIT.\n");
+	pr_debug("Asserting INIT.\n");
 
 	/*
 	 * Turn INIT on target chip
 	 */
-	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
 	/*
 	 * Send IPI
 	 */
-	apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
-				| APIC_DM_INIT);
+	apic_write(APIC_ICR,
+		   APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
 
-	Dprintk("Waiting for send to finish...\n");
+	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
 	mdelay(10);
 
-	Dprintk("Deasserting INIT.\n");
+	pr_debug("Deasserting INIT.\n");
 
 	/* Target chip */
-	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
 	/* Send IPI */
-	apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
 
-	Dprintk("Waiting for send to finish...\n");
+	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
 	mb();
@@ -748,64 +679,52 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	 * target processor state.
 	 */
 	startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
-#ifdef CONFIG_X86_64
-			 (unsigned long)init_rsp);
-#else
 			 (unsigned long)stack_start.sp);
-#endif
 
 	/*
 	 * Run STARTUP IPI loop.
 	 */
-	Dprintk("#startup loops: %d.\n", num_starts);
-
-	maxlvt = lapic_get_maxlvt();
+	pr_debug("#startup loops: %d.\n", num_starts);
 
 	for (j = 1; j <= num_starts; j++) {
-		Dprintk("Sending STARTUP #%d.\n", j);
-		apic_read_around(APIC_SPIV);
-		apic_write(APIC_ESR, 0);
+		pr_debug("Sending STARTUP #%d.\n", j);
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
+			apic_write(APIC_ESR, 0);
 		apic_read(APIC_ESR);
-		Dprintk("After apic_write.\n");
+		pr_debug("After apic_write.\n");
 
 		/*
 		 * STARTUP IPI
 		 */
 
 		/* Target chip */
-		apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
 		/* Boot on the stack */
 		/* Kick the second */
-		apic_write_around(APIC_ICR, APIC_DM_STARTUP
-					| (start_eip >> 12));
+		apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12));
 
 		/*
 		 * Give the other CPU some time to accept the IPI.
 		 */
 		udelay(300);
 
-		Dprintk("Startup point 1.\n");
+		pr_debug("Startup point 1.\n");
 
-		Dprintk("Waiting for send to finish...\n");
+		pr_debug("Waiting for send to finish...\n");
 		send_status = safe_apic_wait_icr_idle();
 
 		/*
 		 * Give the other CPU some time to accept the IPI.
 		 */
 		udelay(200);
-		/*
-		 * Due to the Pentium erratum 3AP.
-		 */
-		if (maxlvt > 3) {
-			apic_read_around(APIC_SPIV);
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
 			apic_write(APIC_ESR, 0);
-		}
 		accept_status = (apic_read(APIC_ESR) & 0xEF);
 		if (send_status || accept_status)
 			break;
 	}
-	Dprintk("After Startup.\n");
+	pr_debug("After Startup.\n");
 
 	if (send_status)
 		printk(KERN_ERR "APIC never delivered???\n");
@@ -832,6 +751,45 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 	complete(&c_idle->done);
 }
 
+#ifdef CONFIG_X86_64
+/*
+ * Allocate node local memory for the AP pda.
+ *
+ * Must be called after the _cpu_pda pointer table is initialized.
+ */
+int __cpuinit get_local_pda(int cpu)
+{
+	struct x8664_pda *oldpda, *newpda;
+	unsigned long size = sizeof(struct x8664_pda);
+	int node = cpu_to_node(cpu);
+
+	if (cpu_pda(cpu) && !cpu_pda(cpu)->in_bootmem)
+		return 0;
+
+	oldpda = cpu_pda(cpu);
+	newpda = kmalloc_node(size, GFP_ATOMIC, node);
+	if (!newpda) {
+		printk(KERN_ERR "Could not allocate node local PDA "
+			"for CPU %d on node %d\n", cpu, node);
+
+		if (oldpda)
+			return 0;	/* have a usable pda */
+		else
+			return -1;
+	}
+
+	if (oldpda) {
+		memcpy(newpda, oldpda, size);
+		if (!after_bootmem)
+			free_bootmem((unsigned long)oldpda, size);
+	}
+
+	newpda->in_bootmem = 0;
+	cpu_pda(cpu) = newpda;
+	return 0;
+}
+#endif /* CONFIG_X86_64 */
+
 static int __cpuinit do_boot_cpu(int apicid, int cpu)
 /*
  * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
@@ -848,28 +806,14 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 		.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
 	};
 	INIT_WORK(&c_idle.work, do_fork_idle);
-#ifdef CONFIG_X86_64
-	/* allocate memory for gdts of secondary cpus. Hotplug is considered */
-	if (!cpu_gdt_descr[cpu].address &&
-		!(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
-		printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu);
-		return -1;
-	}
 
+#ifdef CONFIG_X86_64
 	/* Allocate node local memory for AP pdas */
-	if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
-		struct x8664_pda *newpda, *pda;
-		int node = cpu_to_node(cpu);
-		pda = cpu_pda(cpu);
-		newpda = kmalloc_node(sizeof(struct x8664_pda), GFP_ATOMIC,
-				      node);
-		if (newpda) {
-			memcpy(newpda, pda, sizeof(struct x8664_pda));
-			cpu_pda(cpu) = newpda;
-		} else
-			printk(KERN_ERR
-		"Could not allocate node local PDA for CPU %d on node %d\n",
-				cpu, node);
+	if (cpu > 0) {
+		boot_error = get_local_pda(cpu);
+		if (boot_error)
+			goto restore_state;
+			/* if can't get pda memory, can't start cpu */
 	}
 #endif
 
@@ -905,18 +849,15 @@ do_rest:
 #ifdef CONFIG_X86_32
 	per_cpu(current_task, cpu) = c_idle.idle;
 	init_gdt(cpu);
-	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
-	c_idle.idle->thread.ip = (unsigned long) start_secondary;
 	/* Stack for startup_32 can be just as for start_secondary onwards */
-	stack_start.sp = (void *) c_idle.idle->thread.sp;
 	irq_ctx_init(cpu);
 #else
 	cpu_pda(cpu)->pcurrent = c_idle.idle;
-	init_rsp = c_idle.idle->thread.sp;
-	load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread);
-	initial_code = (unsigned long)start_secondary;
 	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
 #endif
+	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
+	initial_code = (unsigned long)start_secondary;
+	stack_start.sp = (void *) c_idle.idle->thread.sp;
 
 	/* start_ip had better be page-aligned! */
 	start_ip = setup_trampoline();
@@ -934,7 +875,7 @@ do_rest:
 
 	if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
 
-		Dprintk("Setting warm reset code and vector.\n");
+		pr_debug("Setting warm reset code and vector.\n");
 
 		store_NMI_vector(&nmi_high, &nmi_low);
 
@@ -955,9 +896,9 @@ do_rest:
 		/*
 		 * allow APs to start initializing.
 		 */
-		Dprintk("Before Callout %d.\n", cpu);
+		pr_debug("Before Callout %d.\n", cpu);
 		cpu_set(cpu, cpu_callout_map);
-		Dprintk("After Callout %d.\n", cpu);
+		pr_debug("After Callout %d.\n", cpu);
 
 		/*
 		 * Wait 5s total for a response
@@ -970,10 +911,10 @@ do_rest:
 
 		if (cpu_isset(cpu, cpu_callin_map)) {
 			/* number CPUs logically, starting from 1 (BSP is 0) */
-			Dprintk("OK.\n");
+			pr_debug("OK.\n");
 			printk(KERN_INFO "CPU%d: ", cpu);
 			print_cpu_info(&cpu_data(cpu));
-			Dprintk("CPU has booted.\n");
+			pr_debug("CPU has booted.\n");
 		} else {
 			boot_error = 1;
 			if (*((volatile unsigned char *)trampoline_base)
@@ -987,13 +928,12 @@ do_rest:
 				inquire_remote_apic(apicid);
 		}
 	}
-
-	if (boot_error) {
-		/* Try to put things back the way they were before ... */
-		unmap_cpu_to_logical_apicid(cpu);
 #ifdef CONFIG_X86_64
-		clear_node_cpumask(cpu); /* was set by numa_add_cpu */
+restore_state:
 #endif
+	if (boot_error) {
+		/* Try to put things back the way they were before ... */
+		numa_remove_cpu(cpu); /* was set by numa_add_cpu */
 		cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */
 		cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
 		cpu_clear(cpu, cpu_present_map);
@@ -1019,7 +959,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 
 	WARN_ON(irqs_disabled());
 
-	Dprintk("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
+	pr_debug("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
 
 	if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
 	    !physid_isset(apicid, phys_cpu_present_map)) {
@@ -1031,7 +971,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 	 * Already booted CPU?
 	 */
 	if (cpu_isset(cpu, cpu_callin_map)) {
-		Dprintk("do_boot_cpu %d Already started\n", cpu);
+		pr_debug("do_boot_cpu %d Already started\n", cpu);
 		return -ENOSYS;
 	}
 
@@ -1058,7 +998,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 	err = do_boot_cpu(apicid, cpu);
 #endif
 	if (err) {
-		Dprintk("do_boot_cpu failed %d\n", err);
+		pr_debug("do_boot_cpu failed %d\n", err);
 		return -EIO;
 	}
 
@@ -1087,14 +1027,12 @@ static __init void disable_smp(void)
 {
 	cpu_present_map = cpumask_of_cpu(0);
 	cpu_possible_map = cpumask_of_cpu(0);
-#ifdef CONFIG_X86_32
 	smpboot_clear_io_apic_irqs();
-#endif
+
 	if (smp_found_config)
-		phys_cpu_present_map =
-				physid_mask_of_physid(boot_cpu_physical_apicid);
+		physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 	else
-		phys_cpu_present_map = physid_mask_of_physid(0);
+		physid_set_mask_of_physid(0, &phys_cpu_present_map);
 	map_cpu_to_logical_apicid();
 	cpu_set(0, per_cpu(cpu_sibling_map, 0));
 	cpu_set(0, per_cpu(cpu_core_map, 0));
@@ -1157,12 +1095,12 @@ static int __init smp_sanity_check(unsigned max_cpus)
 	 * If SMP should be disabled, then really disable it!
 	 */
 	if (!max_cpus) {
-		printk(KERN_INFO "SMP mode deactivated,"
-				 "forcing use of dummy APIC emulation.\n");
+		printk(KERN_INFO "SMP mode deactivated.\n");
 		smpboot_clear_io_apic();
-#ifdef CONFIG_X86_32
+
+		localise_nmi_watchdog();
+
 		connect_bsp_APIC();
-#endif
 		setup_local_APIC();
 		end_local_APIC_setup();
 		return -1;
@@ -1190,7 +1128,6 @@ static void __init smp_cpu_index_default(void)
 void __init native_smp_prepare_cpus(unsigned int max_cpus)
 {
 	preempt_disable();
-	nmi_watchdog_default();
 	smp_cpu_index_default();
 	current_cpu_data = boot_cpu_data;
 	cpu_callin_map = cpumask_of_cpu(0);
@@ -1217,9 +1154,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	}
 	preempt_enable();
 
-#ifdef CONFIG_X86_32
 	connect_bsp_APIC();
-#endif
+
 	/*
 	 * Switch from PIC to APIC mode.
 	 */
@@ -1257,8 +1193,8 @@ void __init native_smp_prepare_boot_cpu(void)
 	int me = smp_processor_id();
 #ifdef CONFIG_X86_32
 	init_gdt(me);
-	switch_to_new_gdt();
 #endif
+	switch_to_new_gdt();
 	/* already set me in cpu_online_map in boot_cpu_init() */
 	cpu_set(me, cpu_callout_map);
 	per_cpu(cpu_state, me) = CPU_ONLINE;
@@ -1266,7 +1202,7 @@ void __init native_smp_prepare_boot_cpu(void)
 
 void __init native_smp_cpus_done(unsigned int max_cpus)
 {
-	Dprintk("Boot done.\n");
+	pr_debug("Boot done.\n");
 
 	impress_friends();
 	smp_checks();
@@ -1278,29 +1214,12 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-#  ifdef CONFIG_X86_32
-void cpu_exit_clear(void)
-{
-	int cpu = raw_smp_processor_id();
-
-	idle_task_exit();
-
-	cpu_uninit();
-	irq_ctx_exit(cpu);
-
-	cpu_clear(cpu, cpu_callout_map);
-	cpu_clear(cpu, cpu_callin_map);
-
-	unmap_cpu_to_logical_apicid(cpu);
-}
-#  endif /* CONFIG_X86_32 */
-
 static void remove_siblinginfo(int cpu)
 {
 	int sibling;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) {
 		cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
 		/*/
 		 * last thread sibling in this cpu core going down
@@ -1309,7 +1228,7 @@ static void remove_siblinginfo(int cpu)
 			cpu_data(sibling).booted_cores--;
 	}
 
-	for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu))
 		cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
 	cpus_clear(per_cpu(cpu_sibling_map, cpu));
 	cpus_clear(per_cpu(cpu_core_map, cpu));
@@ -1348,12 +1267,20 @@ __init void prefill_possible_map(void)
 	int i;
 	int possible;
 
+	/* no processor from mptable or madt */
+	if (!num_processors)
+		num_processors = 1;
+
+#ifdef CONFIG_HOTPLUG_CPU
 	if (additional_cpus == -1) {
 		if (disabled_cpus > 0)
 			additional_cpus = disabled_cpus;
 		else
 			additional_cpus = 0;
 	}
+#else
+	additional_cpus = 0;
+#endif
 	possible = num_processors + additional_cpus;
 	if (possible > NR_CPUS)
 		possible = NR_CPUS;
@@ -1363,18 +1290,18 @@ __init void prefill_possible_map(void)
 
 	for (i = 0; i < possible; i++)
 		cpu_set(i, cpu_possible_map);
+
+	nr_cpu_ids = possible;
 }
 
 static void __ref remove_cpu_from_maps(int cpu)
 {
 	cpu_clear(cpu, cpu_online_map);
-#ifdef CONFIG_X86_64
 	cpu_clear(cpu, cpu_callout_map);
 	cpu_clear(cpu, cpu_callin_map);
 	/* was set by cpu_init() */
-	clear_bit(cpu, (unsigned long *)&cpu_initialized);
-	clear_node_cpumask(cpu);
-#endif
+	cpu_clear(cpu, cpu_initialized);
+	numa_remove_cpu(cpu);
 }
 
 int __cpu_disable(void)
@@ -1452,7 +1379,8 @@ static int __init parse_maxcpus(char *arg)
 {
 	extern unsigned int maxcpus;
 
-	maxcpus = simple_strtoul(arg, NULL, 0);
+	if (arg)
+		maxcpus = simple_strtoul(arg, NULL, 0);
 	return 0;
 }
 early_param("maxcpus", parse_maxcpus);
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
index 3449064d141a..99941b37eca0 100644
--- a/arch/x86/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon.c
@@ -25,59 +25,3 @@ __cpuinit void init_gdt(int cpu)
 	per_cpu(cpu_number, cpu) = cpu;
 }
 #endif
-
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-		      int wait)
-{
-	return smp_call_function_mask(cpu_online_map, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-/**
- * smp_call_function_single - Run a function on a specific CPU
- * @cpu: The target CPU.  Cannot be the calling CPU.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- */
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-			     int nonatomic, int wait)
-{
-	/* prevent preemption and reschedule on another processor */
-	int ret;
-	int me = get_cpu();
-	if (cpu == me) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-		put_cpu();
-		return 0;
-	}
-
-	ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
-
-	put_cpu();
-	return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
diff --git a/arch/x86/kernel/smpcommon_32.c b/arch/x86/kernel/smpcommon_32.c
deleted file mode 100644
index 8b137891791f..000000000000
--- a/arch/x86/kernel/smpcommon_32.c
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index c28c342c162f..a03e7f6d90c3 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -74,6 +74,7 @@ void save_stack_trace(struct stack_trace *trace)
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
@@ -81,3 +82,4 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 92c20fee6781..e8b9863ef8c4 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -105,6 +105,20 @@ static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs)
 static int enable_single_step(struct task_struct *child)
 {
 	struct pt_regs *regs = task_pt_regs(child);
+	unsigned long oflags;
+
+	/*
+	 * If we stepped into a sysenter/syscall insn, it trapped in
+	 * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+	 * If user-mode had set TF itself, then it's still clear from
+	 * do_debug() and we need to set it again to restore the user
+	 * state so we don't wrongly set TIF_FORCED_TF below.
+	 * If enable_single_step() was used last and that is what
+	 * set TIF_SINGLESTEP, then both TF and TIF_FORCED_TF are
+	 * already set and our bookkeeping is fine.
+	 */
+	if (unlikely(test_tsk_thread_flag(child, TIF_SINGLESTEP)))
+		regs->flags |= X86_EFLAGS_TF;
 
 	/*
 	 * Always set TIF_SINGLESTEP - this guarantees that
@@ -113,11 +127,7 @@ static int enable_single_step(struct task_struct *child)
 	 */
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 
-	/*
-	 * If TF was already set, don't do anything else
-	 */
-	if (regs->flags & X86_EFLAGS_TF)
-		return 0;
+	oflags = regs->flags;
 
 	/* Set TF on the kernel stack.. */
 	regs->flags |= X86_EFLAGS_TF;
@@ -126,9 +136,22 @@ static int enable_single_step(struct task_struct *child)
 	 * ..but if TF is changed by the instruction we will trace,
 	 * don't mark it as being "us" that set it, so that we
 	 * won't clear it by hand later.
+	 *
+	 * Note that if we don't actually execute the popf because
+	 * of a signal arriving right now or suchlike, we will lose
+	 * track of the fact that it really was "us" that set it.
 	 */
-	if (is_setting_trap_flag(child, regs))
+	if (is_setting_trap_flag(child, regs)) {
+		clear_tsk_thread_flag(child, TIF_FORCED_TF);
 		return 0;
+	}
+
+	/*
+	 * If TF was already set, check whether it was us who set it.
+	 * If not, we should never attempt a block step.
+	 */
+	if (oflags & X86_EFLAGS_TF)
+		return test_tsk_thread_flag(child, TIF_FORCED_TF);
 
 	set_tsk_thread_flag(child, TIF_FORCED_TF);
 
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index ae751094eba9..d67ce5f044ba 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_hdr __initdata;
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
 static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
 
+#ifndef CONFIG_X86_NUMAQ
 static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
 
 static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 {
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index d2ab52cc1d6b..7066cb855a60 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -19,8 +19,8 @@
 #include <linux/utsname.h>
 #include <linux/ipc.h>
 
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
 
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
@@ -103,7 +103,7 @@ asmlinkage int old_select(struct sel_arg_struct __user *arg)
  *
  * This is really horribly ugly.
  */
-asmlinkage int sys_ipc (uint call, int first, int second,
+asmlinkage int sys_ipc(uint call, int first, int second,
 			int third, void __user *ptr, long fifth)
 {
 	int version, ret;
@@ -113,24 +113,24 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 
 	switch (call) {
 	case SEMOP:
-		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
+		return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL);
 	case SEMTIMEDOP:
 		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
 					(const struct timespec __user *)fifth);
 
 	case SEMGET:
-		return sys_semget (first, second, third);
+		return sys_semget(first, second, third);
 	case SEMCTL: {
 		union semun fourth;
 		if (!ptr)
 			return -EINVAL;
 		if (get_user(fourth.__pad, (void __user * __user *) ptr))
 			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
+		return sys_semctl(first, second, third, fourth);
 	}
 
 	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr, 
+		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
 				   second, third);
 	case MSGRCV:
 		switch (version) {
@@ -138,45 +138,45 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 			struct ipc_kludge tmp;
 			if (!ptr)
 				return -EINVAL;
-			
+
 			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr, 
-					   sizeof (tmp)))
+					   (struct ipc_kludge __user *) ptr,
+					   sizeof(tmp)))
 				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
+			return sys_msgrcv(first, tmp.msgp, second,
 					   tmp.msgtyp, third);
 		}
 		default:
-			return sys_msgrcv (first,
+			return sys_msgrcv(first,
 					   (struct msgbuf __user *) ptr,
 					   second, fifth, third);
 		}
 	case MSGGET:
-		return sys_msgget ((key_t) first, second);
+		return sys_msgget((key_t) first, second);
 	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
+		return sys_msgctl(first, second, (struct msqid_ds __user *) ptr);
 
 	case SHMAT:
 		switch (version) {
 		default: {
 			ulong raddr;
-			ret = do_shmat (first, (char __user *) ptr, second, &raddr);
+			ret = do_shmat(first, (char __user *) ptr, second, &raddr);
 			if (ret)
 				return ret;
-			return put_user (raddr, (ulong __user *) third);
+			return put_user(raddr, (ulong __user *) third);
 		}
 		case 1:	/* iBCS2 emulator entry point */
 			if (!segment_eq(get_fs(), get_ds()))
 				return -EINVAL;
 			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
-			return do_shmat (first, (char __user *) ptr, second, (ulong *) third);
+			return do_shmat(first, (char __user *) ptr, second, (ulong *) third);
 		}
-	case SHMDT: 
-		return sys_shmdt ((char __user *)ptr);
+	case SHMDT:
+		return sys_shmdt((char __user *)ptr);
 	case SHMGET:
-		return sys_shmget (first, second, third);
+		return sys_shmget(first, second, third);
 	case SHMCTL:
-		return sys_shmctl (first, second,
+		return sys_shmctl(first, second,
 				   (struct shmid_ds __user *) ptr);
 	default:
 		return -ENOSYS;
@@ -186,28 +186,28 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 /*
  * Old cruft
  */
-asmlinkage int sys_uname(struct old_utsname __user * name)
+asmlinkage int sys_uname(struct old_utsname __user *name)
 {
 	int err;
 	if (!name)
 		return -EFAULT;
 	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
+	err = copy_to_user(name, utsname(), sizeof(*name));
 	up_read(&uts_sem);
-	return err?-EFAULT:0;
+	return err? -EFAULT:0;
 }
 
-asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+asmlinkage int sys_olduname(struct oldold_utsname __user *name)
 {
 	int error;
 
 	if (!name)
 		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
+	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
 		return -EFAULT;
-  
-  	down_read(&uts_sem);
-	
+
+	down_read(&uts_sem);
+
 	error = __copy_to_user(&name->sysname, &utsname()->sysname,
 			       __OLD_UTS_LEN);
 	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
@@ -223,9 +223,9 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name)
 	error |= __copy_to_user(&name->machine, &utsname()->machine,
 				__OLD_UTS_LEN);
 	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
-	
+
 	up_read(&uts_sem);
-	
+
 	error = error ? -EFAULT : 0;
 
 	return error;
@@ -241,6 +241,6 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[])
 	long __res;
 	asm volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx"
 	: "=a" (__res)
-	: "0" (__NR_execve),"ri" (filename),"c" (argv), "d" (envp) : "memory");
+	: "0" (__NR_execve), "ri" (filename), "c" (argv), "d" (envp) : "memory");
 	return __res;
 }
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index adff5562f5fd..d44395ff34c3 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -326,3 +326,9 @@ ENTRY(sys_call_table)
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 2ff21f398934..ffe3c664afc0 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -39,9 +39,6 @@
 
 #include "do_timer.h"
 
-unsigned int cpu_khz;	/* Detected as we calibrate the TSC */
-EXPORT_SYMBOL(cpu_khz);
-
 int timer_ack;
 
 unsigned long profile_pc(struct pt_regs *regs)
@@ -84,8 +81,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	if (timer_ack) {
 		/*
 		 * Subtle, when I/O APICs are used we have to ack timer IRQ
-		 * manually to reset the IRR bit for do_slow_gettimeoffset().
-		 * This will also deassert NMI lines for the watchdog if run
+		 * manually to deassert NMI lines for the watchdog if run
 		 * on an 82489DX-based system.
 		 */
 		spin_lock(&i8259A_lock);
@@ -133,6 +129,7 @@ void __init hpet_time_init(void)
  */
 void __init time_init(void)
 {
+	pre_time_init_hook();
 	tsc_init();
 	late_time_init = choose_time_init();
 }
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index c737849e2ef7..e3d49c553af2 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -56,7 +56,7 @@ static irqreturn_t timer_event_interrupt(int irq, void *dev_id)
 /* calibrate_cpu is used on systems with fixed rate TSCs to determine
  * processor frequency */
 #define TICK_COUNT 100000000
-unsigned long __init native_calculate_cpu_khz(void)
+unsigned long __init calibrate_cpu(void)
 {
 	int tsc_start, tsc_now;
 	int i, no_ctr_free;
@@ -116,23 +116,11 @@ void __init hpet_time_init(void)
 
 void __init time_init(void)
 {
-	tsc_calibrate();
-
-	cpu_khz = tsc_khz;
-	if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
-		(boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
-		cpu_khz = calculate_cpu_khz();
-
-	if (unsynchronized_tsc())
-		mark_tsc_unstable("TSCs unsynchronized");
-
+	tsc_init();
 	if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
 		vgetcpu_mode = VGETCPU_RDTSCP;
 	else
 		vgetcpu_mode = VGETCPU_LSL;
 
-	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
-		cpu_khz / 1000, cpu_khz % 1000);
-	init_tsc_clocksource();
 	late_time_init = choose_time_init();
 }
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index 9bb2363851af..fec1ecedc9b7 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -238,6 +238,6 @@ static void do_flush_tlb_all(void *info)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+	on_each_cpu(do_flush_tlb_all, NULL, 1);
 }
 
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index a1f07d793202..dcbf7a1159ea 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -15,6 +15,8 @@
 #include <asm/proto.h>
 #include <asm/apicdef.h>
 #include <asm/idle.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_bau.h>
 
 #include <mach_ipi.h>
 /*
@@ -162,6 +164,9 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
 	union smp_flush_state *f;
 	cpumask_t cpumask = *cpumaskp;
 
+	if (is_uv_system() && uv_flush_tlb_others(&cpumask, mm, va))
+		return;
+
 	/* Caller has disabled preemption */
 	sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
 	f = &per_cpu(flush_state, sender);
@@ -270,5 +275,5 @@ static void do_flush_tlb_all(void *info)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+	on_each_cpu(do_flush_tlb_all, NULL, 1);
 }
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
new file mode 100644
index 000000000000..d0fbb7712ab0
--- /dev/null
+++ b/arch/x86/kernel/tlb_uv.c
@@ -0,0 +1,792 @@
+/*
+ *	SGI UltraViolet TLB flush routines.
+ *
+ *	(c) 2008 Cliff Wickman <cpw@sgi.com>, SGI.
+ *
+ *	This code is released under the GNU General Public License version 2 or
+ *	later.
+ */
+#include <linux/mc146818rtc.h>
+#include <linux/proc_fs.h>
+#include <linux/kernel.h>
+
+#include <asm/mmu_context.h>
+#include <asm/uv/uv_mmrs.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_bau.h>
+#include <asm/genapic.h>
+#include <asm/idle.h>
+#include <asm/tsc.h>
+
+#include <mach_apic.h>
+
+static struct bau_control	**uv_bau_table_bases __read_mostly;
+static int			uv_bau_retry_limit __read_mostly;
+
+/* position of pnode (which is nasid>>1): */
+static int			uv_nshift __read_mostly;
+
+static unsigned long		uv_mmask __read_mostly;
+
+static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
+static DEFINE_PER_CPU(struct bau_control, bau_control);
+
+/*
+ * Free a software acknowledge hardware resource by clearing its Pending
+ * bit. This will return a reply to the sender.
+ * If the message has timed out, a reply has already been sent by the
+ * hardware but the resource has not been released. In that case our
+ * clear of the Timeout bit (as well) will free the resource. No reply will
+ * be sent (the hardware will only do one reply per message).
+ */
+static void uv_reply_to_message(int resource,
+				struct bau_payload_queue_entry *msg,
+				struct bau_msg_status *msp)
+{
+	unsigned long dw;
+
+	dw = (1 << (resource + UV_SW_ACK_NPENDING)) | (1 << resource);
+	msg->replied_to = 1;
+	msg->sw_ack_vector = 0;
+	if (msp)
+		msp->seen_by.bits = 0;
+	uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw);
+}
+
+/*
+ * Do all the things a cpu should do for a TLB shootdown message.
+ * Other cpu's may come here at the same time for this message.
+ */
+static void uv_bau_process_message(struct bau_payload_queue_entry *msg,
+				   int msg_slot, int sw_ack_slot)
+{
+	unsigned long this_cpu_mask;
+	struct bau_msg_status *msp;
+	int cpu;
+
+	msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
+	cpu = uv_blade_processor_id();
+	msg->number_of_cpus =
+	    uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
+	this_cpu_mask = 1UL << cpu;
+	if (msp->seen_by.bits & this_cpu_mask)
+		return;
+	atomic_or_long(&msp->seen_by.bits, this_cpu_mask);
+
+	if (msg->replied_to == 1)
+		return;
+
+	if (msg->address == TLB_FLUSH_ALL) {
+		local_flush_tlb();
+		__get_cpu_var(ptcstats).alltlb++;
+	} else {
+		__flush_tlb_one(msg->address);
+		__get_cpu_var(ptcstats).onetlb++;
+	}
+
+	__get_cpu_var(ptcstats).requestee++;
+
+	atomic_inc_short(&msg->acknowledge_count);
+	if (msg->number_of_cpus == msg->acknowledge_count)
+		uv_reply_to_message(sw_ack_slot, msg, msp);
+}
+
+/*
+ * Examine the payload queue on one distribution node to see
+ * which messages have not been seen, and which cpu(s) have not seen them.
+ *
+ * Returns the number of cpu's that have not responded.
+ */
+static int uv_examine_destination(struct bau_control *bau_tablesp, int sender)
+{
+	struct bau_payload_queue_entry *msg;
+	struct bau_msg_status *msp;
+	int count = 0;
+	int i;
+	int j;
+
+	for (msg = bau_tablesp->va_queue_first, i = 0; i < DEST_Q_SIZE;
+	     msg++, i++) {
+		if ((msg->sending_cpu == sender) && (!msg->replied_to)) {
+			msp = bau_tablesp->msg_statuses + i;
+			printk(KERN_DEBUG
+			       "blade %d: address:%#lx %d of %d, not cpu(s): ",
+			       i, msg->address, msg->acknowledge_count,
+			       msg->number_of_cpus);
+			for (j = 0; j < msg->number_of_cpus; j++) {
+				if (!((1L << j) & msp->seen_by.bits)) {
+					count++;
+					printk("%d ", j);
+				}
+			}
+			printk("\n");
+		}
+	}
+	return count;
+}
+
+/*
+ * Examine the payload queue on all the distribution nodes to see
+ * which messages have not been seen, and which cpu(s) have not seen them.
+ *
+ * Returns the number of cpu's that have not responded.
+ */
+static int uv_examine_destinations(struct bau_target_nodemask *distribution)
+{
+	int sender;
+	int i;
+	int count = 0;
+
+	sender = smp_processor_id();
+	for (i = 0; i < sizeof(struct bau_target_nodemask) * BITSPERBYTE; i++) {
+		if (!bau_node_isset(i, distribution))
+			continue;
+		count += uv_examine_destination(uv_bau_table_bases[i], sender);
+	}
+	return count;
+}
+
+/*
+ * wait for completion of a broadcast message
+ *
+ * return COMPLETE, RETRY or GIVEUP
+ */
+static int uv_wait_completion(struct bau_desc *bau_desc,
+			      unsigned long mmr_offset, int right_shift)
+{
+	int exams = 0;
+	long destination_timeouts = 0;
+	long source_timeouts = 0;
+	unsigned long descriptor_status;
+
+	while ((descriptor_status = (((unsigned long)
+		uv_read_local_mmr(mmr_offset) >>
+			right_shift) & UV_ACT_STATUS_MASK)) !=
+			DESC_STATUS_IDLE) {
+		if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) {
+			source_timeouts++;
+			if (source_timeouts > SOURCE_TIMEOUT_LIMIT)
+				source_timeouts = 0;
+			__get_cpu_var(ptcstats).s_retry++;
+			return FLUSH_RETRY;
+		}
+		/*
+		 * spin here looking for progress at the destinations
+		 */
+		if (descriptor_status == DESC_STATUS_DESTINATION_TIMEOUT) {
+			destination_timeouts++;
+			if (destination_timeouts > DESTINATION_TIMEOUT_LIMIT) {
+				/*
+				 * returns number of cpus not responding
+				 */
+				if (uv_examine_destinations
+				    (&bau_desc->distribution) == 0) {
+					__get_cpu_var(ptcstats).d_retry++;
+					return FLUSH_RETRY;
+				}
+				exams++;
+				if (exams >= uv_bau_retry_limit) {
+					printk(KERN_DEBUG
+					       "uv_flush_tlb_others");
+					printk("giving up on cpu %d\n",
+					       smp_processor_id());
+					return FLUSH_GIVEUP;
+				}
+				/*
+				 * delays can hang the simulator
+				   udelay(1000);
+				 */
+				destination_timeouts = 0;
+			}
+		}
+	}
+	return FLUSH_COMPLETE;
+}
+
+/**
+ * uv_flush_send_and_wait
+ *
+ * Send a broadcast and wait for a broadcast message to complete.
+ *
+ * The cpumaskp mask contains the cpus the broadcast was sent to.
+ *
+ * Returns 1 if all remote flushing was done. The mask is zeroed.
+ * Returns 0 if some remote flushing remains to be done. The mask is left
+ * unchanged.
+ */
+int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc,
+			   cpumask_t *cpumaskp)
+{
+	int completion_status = 0;
+	int right_shift;
+	int tries = 0;
+	int blade;
+	int bit;
+	unsigned long mmr_offset;
+	unsigned long index;
+	cycles_t time1;
+	cycles_t time2;
+
+	if (cpu < UV_CPUS_PER_ACT_STATUS) {
+		mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0;
+		right_shift = cpu * UV_ACT_STATUS_SIZE;
+	} else {
+		mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1;
+		right_shift =
+		    ((cpu - UV_CPUS_PER_ACT_STATUS) * UV_ACT_STATUS_SIZE);
+	}
+	time1 = get_cycles();
+	do {
+		tries++;
+		index = (1UL << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) |
+			cpu;
+		uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index);
+		completion_status = uv_wait_completion(bau_desc, mmr_offset,
+					right_shift);
+	} while (completion_status == FLUSH_RETRY);
+	time2 = get_cycles();
+	__get_cpu_var(ptcstats).sflush += (time2 - time1);
+	if (tries > 1)
+		__get_cpu_var(ptcstats).retriesok++;
+
+	if (completion_status == FLUSH_GIVEUP) {
+		/*
+		 * Cause the caller to do an IPI-style TLB shootdown on
+		 * the cpu's, all of which are still in the mask.
+		 */
+		__get_cpu_var(ptcstats).ptc_i++;
+		return 0;
+	}
+
+	/*
+	 * Success, so clear the remote cpu's from the mask so we don't
+	 * use the IPI method of shootdown on them.
+	 */
+	for_each_cpu_mask(bit, *cpumaskp) {
+		blade = uv_cpu_to_blade_id(bit);
+		if (blade == this_blade)
+			continue;
+		cpu_clear(bit, *cpumaskp);
+	}
+	if (!cpus_empty(*cpumaskp))
+		return 0;
+	return 1;
+}
+
+/**
+ * uv_flush_tlb_others - globally purge translation cache of a virtual
+ * address or all TLB's
+ * @cpumaskp: mask of all cpu's in which the address is to be removed
+ * @mm: mm_struct containing virtual address range
+ * @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu)
+ *
+ * This is the entry point for initiating any UV global TLB shootdown.
+ *
+ * Purges the translation caches of all specified processors of the given
+ * virtual address, or purges all TLB's on specified processors.
+ *
+ * The caller has derived the cpumaskp from the mm_struct and has subtracted
+ * the local cpu from the mask.  This function is called only if there
+ * are bits set in the mask. (e.g. flush_tlb_page())
+ *
+ * The cpumaskp is converted into a nodemask of the nodes containing
+ * the cpus.
+ *
+ * Returns 1 if all remote flushing was done.
+ * Returns 0 if some remote flushing remains to be done.
+ */
+int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm,
+			unsigned long va)
+{
+	int i;
+	int bit;
+	int blade;
+	int cpu;
+	int this_blade;
+	int locals = 0;
+	struct bau_desc *bau_desc;
+
+	cpu = uv_blade_processor_id();
+	this_blade = uv_numa_blade_id();
+	bau_desc = __get_cpu_var(bau_control).descriptor_base;
+	bau_desc += UV_ITEMS_PER_DESCRIPTOR * cpu;
+
+	bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
+
+	i = 0;
+	for_each_cpu_mask(bit, *cpumaskp) {
+		blade = uv_cpu_to_blade_id(bit);
+		BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
+		if (blade == this_blade) {
+			locals++;
+			continue;
+		}
+		bau_node_set(blade, &bau_desc->distribution);
+		i++;
+	}
+	if (i == 0) {
+		/*
+		 * no off_node flushing; return status for local node
+		 */
+		if (locals)
+			return 0;
+		else
+			return 1;
+	}
+	__get_cpu_var(ptcstats).requestor++;
+	__get_cpu_var(ptcstats).ntargeted += i;
+
+	bau_desc->payload.address = va;
+	bau_desc->payload.sending_cpu = smp_processor_id();
+
+	return uv_flush_send_and_wait(cpu, this_blade, bau_desc, cpumaskp);
+}
+
+/*
+ * The BAU message interrupt comes here. (registered by set_intr_gate)
+ * See entry_64.S
+ *
+ * We received a broadcast assist message.
+ *
+ * Interrupts may have been disabled; this interrupt could represent
+ * the receipt of several messages.
+ *
+ * All cores/threads on this node get this interrupt.
+ * The last one to see it does the s/w ack.
+ * (the resource will not be freed until noninterruptable cpus see this
+ *  interrupt; hardware will timeout the s/w ack and reply ERROR)
+ */
+void uv_bau_message_interrupt(struct pt_regs *regs)
+{
+	struct bau_payload_queue_entry *va_queue_first;
+	struct bau_payload_queue_entry *va_queue_last;
+	struct bau_payload_queue_entry *msg;
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	cycles_t time1;
+	cycles_t time2;
+	int msg_slot;
+	int sw_ack_slot;
+	int fw;
+	int count = 0;
+	unsigned long local_pnode;
+
+	ack_APIC_irq();
+	exit_idle();
+	irq_enter();
+
+	time1 = get_cycles();
+
+	local_pnode = uv_blade_to_pnode(uv_numa_blade_id());
+
+	va_queue_first = __get_cpu_var(bau_control).va_queue_first;
+	va_queue_last = __get_cpu_var(bau_control).va_queue_last;
+
+	msg = __get_cpu_var(bau_control).bau_msg_head;
+	while (msg->sw_ack_vector) {
+		count++;
+		fw = msg->sw_ack_vector;
+		msg_slot = msg - va_queue_first;
+		sw_ack_slot = ffs(fw) - 1;
+
+		uv_bau_process_message(msg, msg_slot, sw_ack_slot);
+
+		msg++;
+		if (msg > va_queue_last)
+			msg = va_queue_first;
+		__get_cpu_var(bau_control).bau_msg_head = msg;
+	}
+	if (!count)
+		__get_cpu_var(ptcstats).nomsg++;
+	else if (count > 1)
+		__get_cpu_var(ptcstats).multmsg++;
+
+	time2 = get_cycles();
+	__get_cpu_var(ptcstats).dflush += (time2 - time1);
+
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
+static void uv_enable_timeouts(void)
+{
+	int i;
+	int blade;
+	int last_blade;
+	int pnode;
+	int cur_cpu = 0;
+	unsigned long apicid;
+
+	last_blade = -1;
+	for_each_online_node(i) {
+		blade = uv_node_to_blade_id(i);
+		if (blade == last_blade)
+			continue;
+		last_blade = blade;
+		apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+		pnode = uv_blade_to_pnode(blade);
+		cur_cpu += uv_blade_nr_possible_cpus(i);
+	}
+}
+
+static void *uv_ptc_seq_start(struct seq_file *file, loff_t *offset)
+{
+	if (*offset < num_possible_cpus())
+		return offset;
+	return NULL;
+}
+
+static void *uv_ptc_seq_next(struct seq_file *file, void *data, loff_t *offset)
+{
+	(*offset)++;
+	if (*offset < num_possible_cpus())
+		return offset;
+	return NULL;
+}
+
+static void uv_ptc_seq_stop(struct seq_file *file, void *data)
+{
+}
+
+/*
+ * Display the statistics thru /proc
+ * data points to the cpu number
+ */
+static int uv_ptc_seq_show(struct seq_file *file, void *data)
+{
+	struct ptc_stats *stat;
+	int cpu;
+
+	cpu = *(loff_t *)data;
+
+	if (!cpu) {
+		seq_printf(file,
+		"# cpu requestor requestee one all sretry dretry ptc_i ");
+		seq_printf(file,
+		"sw_ack sflush dflush sok dnomsg dmult starget\n");
+	}
+	if (cpu < num_possible_cpus() && cpu_online(cpu)) {
+		stat = &per_cpu(ptcstats, cpu);
+		seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld ",
+			   cpu, stat->requestor,
+			   stat->requestee, stat->onetlb, stat->alltlb,
+			   stat->s_retry, stat->d_retry, stat->ptc_i);
+		seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
+			   uv_read_global_mmr64(uv_blade_to_pnode
+					(uv_cpu_to_blade_id(cpu)),
+					UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
+			   stat->sflush, stat->dflush,
+			   stat->retriesok, stat->nomsg,
+			   stat->multmsg, stat->ntargeted);
+	}
+
+	return 0;
+}
+
+/*
+ *  0: display meaning of the statistics
+ * >0: retry limit
+ */
+static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user,
+				 size_t count, loff_t *data)
+{
+	long newmode;
+	char optstr[64];
+
+	if (count == 0 || count > sizeof(optstr))
+		return -EINVAL;
+	if (copy_from_user(optstr, user, count))
+		return -EFAULT;
+	optstr[count - 1] = '\0';
+	if (strict_strtoul(optstr, 10, &newmode) < 0) {
+		printk(KERN_DEBUG "%s is invalid\n", optstr);
+		return -EINVAL;
+	}
+
+	if (newmode == 0) {
+		printk(KERN_DEBUG "# cpu:      cpu number\n");
+		printk(KERN_DEBUG
+		"requestor:  times this cpu was the flush requestor\n");
+		printk(KERN_DEBUG
+		"requestee:  times this cpu was requested to flush its TLBs\n");
+		printk(KERN_DEBUG
+		"one:        times requested to flush a single address\n");
+		printk(KERN_DEBUG
+		"all:        times requested to flush all TLB's\n");
+		printk(KERN_DEBUG
+		"sretry:     number of retries of source-side timeouts\n");
+		printk(KERN_DEBUG
+		"dretry:     number of retries of destination-side timeouts\n");
+		printk(KERN_DEBUG
+		"ptc_i:      times UV fell through to IPI-style flushes\n");
+		printk(KERN_DEBUG
+		"sw_ack:     image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n");
+		printk(KERN_DEBUG
+		"sflush_us:  cycles spent in uv_flush_tlb_others()\n");
+		printk(KERN_DEBUG
+		"dflush_us:  cycles spent in handling flush requests\n");
+		printk(KERN_DEBUG "sok:        successes on retry\n");
+		printk(KERN_DEBUG "dnomsg:     interrupts with no message\n");
+		printk(KERN_DEBUG
+		"dmult:      interrupts with multiple messages\n");
+		printk(KERN_DEBUG "starget:    nodes targeted\n");
+	} else {
+		uv_bau_retry_limit = newmode;
+		printk(KERN_DEBUG "timeout retry limit:%d\n",
+		       uv_bau_retry_limit);
+	}
+
+	return count;
+}
+
+static const struct seq_operations uv_ptc_seq_ops = {
+	.start		= uv_ptc_seq_start,
+	.next		= uv_ptc_seq_next,
+	.stop		= uv_ptc_seq_stop,
+	.show		= uv_ptc_seq_show
+};
+
+static int uv_ptc_proc_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &uv_ptc_seq_ops);
+}
+
+static const struct file_operations proc_uv_ptc_operations = {
+	.open		= uv_ptc_proc_open,
+	.read		= seq_read,
+	.write		= uv_ptc_proc_write,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init uv_ptc_init(void)
+{
+	struct proc_dir_entry *proc_uv_ptc;
+
+	if (!is_uv_system())
+		return 0;
+
+	if (!proc_mkdir("sgi_uv", NULL))
+		return -EINVAL;
+
+	proc_uv_ptc = create_proc_entry(UV_PTC_BASENAME, 0444, NULL);
+	if (!proc_uv_ptc) {
+		printk(KERN_ERR "unable to create %s proc entry\n",
+		       UV_PTC_BASENAME);
+		remove_proc_entry("sgi_uv", NULL);
+		return -EINVAL;
+	}
+	proc_uv_ptc->proc_fops = &proc_uv_ptc_operations;
+	return 0;
+}
+
+/*
+ * begin the initialization of the per-blade control structures
+ */
+static struct bau_control * __init uv_table_bases_init(int blade, int node)
+{
+	int i;
+	int *ip;
+	struct bau_msg_status *msp;
+	struct bau_control *bau_tabp;
+
+	bau_tabp =
+	    kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, node);
+	BUG_ON(!bau_tabp);
+
+	bau_tabp->msg_statuses =
+	    kmalloc_node(sizeof(struct bau_msg_status) *
+			 DEST_Q_SIZE, GFP_KERNEL, node);
+	BUG_ON(!bau_tabp->msg_statuses);
+
+	for (i = 0, msp = bau_tabp->msg_statuses; i < DEST_Q_SIZE; i++, msp++)
+		bau_cpubits_clear(&msp->seen_by, (int)
+				  uv_blade_nr_possible_cpus(blade));
+
+	bau_tabp->watching =
+	    kmalloc_node(sizeof(int) * DEST_NUM_RESOURCES, GFP_KERNEL, node);
+	BUG_ON(!bau_tabp->watching);
+
+	for (i = 0, ip = bau_tabp->watching; i < DEST_Q_SIZE; i++, ip++)
+		*ip = 0;
+
+	uv_bau_table_bases[blade] = bau_tabp;
+
+	return bau_tabp;
+}
+
+/*
+ * finish the initialization of the per-blade control structures
+ */
+static void __init
+uv_table_bases_finish(int blade, int node, int cur_cpu,
+		      struct bau_control *bau_tablesp,
+		      struct bau_desc *adp)
+{
+	struct bau_control *bcp;
+	int i;
+
+	for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) {
+		bcp = (struct bau_control *)&per_cpu(bau_control, i);
+
+		bcp->bau_msg_head	= bau_tablesp->va_queue_first;
+		bcp->va_queue_first	= bau_tablesp->va_queue_first;
+		bcp->va_queue_last	= bau_tablesp->va_queue_last;
+		bcp->watching		= bau_tablesp->watching;
+		bcp->msg_statuses	= bau_tablesp->msg_statuses;
+		bcp->descriptor_base	= adp;
+	}
+}
+
+/*
+ * initialize the sending side's sending buffers
+ */
+static struct bau_desc * __init
+uv_activation_descriptor_init(int node, int pnode)
+{
+	int i;
+	unsigned long pa;
+	unsigned long m;
+	unsigned long n;
+	unsigned long mmr_image;
+	struct bau_desc *adp;
+	struct bau_desc *ad2;
+
+	adp = (struct bau_desc *)
+	    kmalloc_node(16384, GFP_KERNEL, node);
+	BUG_ON(!adp);
+
+	pa = __pa((unsigned long)adp);
+	n = pa >> uv_nshift;
+	m = pa & uv_mmask;
+
+	mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE);
+	if (mmr_image) {
+		uv_write_global_mmr64(pnode, (unsigned long)
+				      UVH_LB_BAU_SB_DESCRIPTOR_BASE,
+				      (n << UV_DESC_BASE_PNODE_SHIFT | m));
+	}
+
+	for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
+		memset(ad2, 0, sizeof(struct bau_desc));
+		ad2->header.sw_ack_flag = 1;
+		ad2->header.base_dest_nodeid =
+		    uv_blade_to_pnode(uv_cpu_to_blade_id(0));
+		ad2->header.command = UV_NET_ENDPOINT_INTD;
+		ad2->header.int_both = 1;
+		/*
+		 * all others need to be set to zero:
+		 *   fairness chaining multilevel count replied_to
+		 */
+	}
+	return adp;
+}
+
+/*
+ * initialize the destination side's receiving buffers
+ */
+static struct bau_payload_queue_entry * __init
+uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
+{
+	struct bau_payload_queue_entry *pqp;
+	char *cp;
+
+	pqp = (struct bau_payload_queue_entry *) kmalloc_node(
+		(DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
+		GFP_KERNEL, node);
+	BUG_ON(!pqp);
+
+	cp = (char *)pqp + 31;
+	pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5);
+	bau_tablesp->va_queue_first = pqp;
+	uv_write_global_mmr64(pnode,
+			      UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
+			      ((unsigned long)pnode <<
+			       UV_PAYLOADQ_PNODE_SHIFT) |
+			      uv_physnodeaddr(pqp));
+	uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL,
+			      uv_physnodeaddr(pqp));
+	bau_tablesp->va_queue_last = pqp + (DEST_Q_SIZE - 1);
+	uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST,
+			      (unsigned long)
+			      uv_physnodeaddr(bau_tablesp->va_queue_last));
+	memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * DEST_Q_SIZE);
+
+	return pqp;
+}
+
+/*
+ * Initialization of each UV blade's structures
+ */
+static int __init uv_init_blade(int blade, int node, int cur_cpu)
+{
+	int pnode;
+	unsigned long pa;
+	unsigned long apicid;
+	struct bau_desc *adp;
+	struct bau_payload_queue_entry *pqp;
+	struct bau_control *bau_tablesp;
+
+	bau_tablesp = uv_table_bases_init(blade, node);
+	pnode = uv_blade_to_pnode(blade);
+	adp = uv_activation_descriptor_init(node, pnode);
+	pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
+	uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp);
+	/*
+	 * the below initialization can't be in firmware because the
+	 * messaging IRQ will be determined by the OS
+	 */
+	apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+	pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
+	if ((pa & 0xff) != UV_BAU_MESSAGE) {
+		uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
+				      ((apicid << 32) | UV_BAU_MESSAGE));
+	}
+	return 0;
+}
+
+/*
+ * Initialization of BAU-related structures
+ */
+static int __init uv_bau_init(void)
+{
+	int blade;
+	int node;
+	int nblades;
+	int last_blade;
+	int cur_cpu = 0;
+
+	if (!is_uv_system())
+		return 0;
+
+	uv_bau_retry_limit = 1;
+	uv_nshift = uv_hub_info->n_val;
+	uv_mmask = (1UL << uv_hub_info->n_val) - 1;
+	nblades = 0;
+	last_blade = -1;
+	for_each_online_node(node) {
+		blade = uv_node_to_blade_id(node);
+		if (blade == last_blade)
+			continue;
+		last_blade = blade;
+		nblades++;
+	}
+	uv_bau_table_bases = (struct bau_control **)
+	    kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
+	BUG_ON(!uv_bau_table_bases);
+
+	last_blade = -1;
+	for_each_online_node(node) {
+		blade = uv_node_to_blade_id(node);
+		if (blade == last_blade)
+			continue;
+		last_blade = blade;
+		uv_init_blade(blade, node, cur_cpu);
+		cur_cpu += uv_blade_nr_possible_cpus(blade);
+	}
+	set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
+	uv_enable_timeouts();
+
+	return 0;
+}
+__initcall(uv_bau_init);
+__initcall(uv_ptc_init);
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index abbf199adebb..1106fac6024d 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -2,7 +2,7 @@
 
 #include <asm/trampoline.h>
 
-/* ready for x86_64, no harm for x86, since it will overwrite after alloc */
+/* ready for x86_64 and x86 */
 unsigned char *trampoline_base = __va(TRAMPOLINE_BASE);
 
 /*
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index 08d752de4eee..03df8e45e5a1 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -1,5 +1,6 @@
 /*
  *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
  *
  *  Pentium III FXSR, SSE support
  *	Gareth Hughes <gareth@valinux.com>, May 2000
@@ -57,11 +58,10 @@
 #include <asm/nmi.h>
 #include <asm/smp.h>
 #include <asm/io.h>
+#include <asm/traps.h>
 
 #include "mach_traps.h"
 
-int panic_on_unrecovered_nmi;
-
 DECLARE_BITMAP(used_vectors, NR_VECTORS);
 EXPORT_SYMBOL_GPL(used_vectors);
 
@@ -78,39 +78,22 @@ char ignore_fpu_irq;
 gate_desc idt_table[256]
 	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
 
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void simd_coprocessor_error(void);
-asmlinkage void alignment_check(void);
-asmlinkage void spurious_interrupt_bug(void);
-asmlinkage void machine_check(void);
-
+int panic_on_unrecovered_nmi;
 int kstack_depth_to_print = 24;
 static unsigned int code_bytes = 64;
+static int ignore_nmis;
+static int die_counter;
 
 void printk_address(unsigned long address, int reliable)
 {
 #ifdef CONFIG_KALLSYMS
-	char namebuf[KSYM_NAME_LEN];
 	unsigned long offset = 0;
 	unsigned long symsize;
 	const char *symname;
-	char reliab[4] = "";
-	char *delim = ":";
 	char *modname;
+	char *delim = ":";
+	char namebuf[KSYM_NAME_LEN];
+	char reliab[4] = "";
 
 	symname = kallsyms_lookup(address, &symsize, &offset,
 					&modname, namebuf);
@@ -130,22 +113,23 @@ void printk_address(unsigned long address, int reliable)
 #endif
 }
 
-static inline int valid_stack_ptr(struct thread_info *tinfo, void *p, unsigned size)
+static inline int valid_stack_ptr(struct thread_info *tinfo,
+			void *p, unsigned int size)
 {
-	return	p > (void *)tinfo &&
-		p <= (void *)tinfo + THREAD_SIZE - size;
+	void *t = tinfo;
+	return	p > t && p <= t + THREAD_SIZE - size;
 }
 
 /* The form of the top of the frame on the stack */
 struct stack_frame {
-	struct stack_frame	*next_frame;
-	unsigned long		return_address;
+	struct stack_frame *next_frame;
+	unsigned long return_address;
 };
 
 static inline unsigned long
 print_context_stack(struct thread_info *tinfo,
-		    unsigned long *stack, unsigned long bp,
-		    const struct stacktrace_ops *ops, void *data)
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data)
 {
 	struct stack_frame *frame = (struct stack_frame *)bp;
 
@@ -167,8 +151,6 @@ print_context_stack(struct thread_info *tinfo,
 	return bp;
 }
 
-#define MSG(msg)		ops->warning(data, msg)
-
 void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
 		const struct stacktrace_ops *ops, void *data)
@@ -178,7 +160,6 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 
 	if (!stack) {
 		unsigned long dummy;
-
 		stack = &dummy;
 		if (task != current)
 			stack = (unsigned long *)task->thread.sp;
@@ -196,7 +177,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 	}
 #endif
 
-	while (1) {
+	for (;;) {
 		struct thread_info *context;
 
 		context = (struct thread_info *)
@@ -248,15 +229,15 @@ static void print_trace_address(void *data, unsigned long addr, int reliable)
 }
 
 static const struct stacktrace_ops print_trace_ops = {
-	.warning		= print_trace_warning,
-	.warning_symbol		= print_trace_warning_symbol,
-	.stack			= print_trace_stack,
-	.address		= print_trace_address,
+	.warning = print_trace_warning,
+	.warning_symbol = print_trace_warning_symbol,
+	.stack = print_trace_stack,
+	.address = print_trace_address,
 };
 
 static void
 show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *stack, unsigned long bp, char *log_lvl)
+		unsigned long *stack, unsigned long bp, char *log_lvl)
 {
 	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
 	printk("%s =======================\n", log_lvl);
@@ -351,15 +332,14 @@ void show_registers(struct pt_regs *regs)
 		printk(KERN_EMERG "Code: ");
 
 		ip = (u8 *)regs->ip - code_prologue;
-		if (ip < (u8 *)PAGE_OFFSET ||
-			probe_kernel_address(ip, c)) {
+		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
 			/* try starting at EIP */
 			ip = (u8 *)regs->ip;
 			code_len = code_len - code_prologue + 1;
 		}
 		for (i = 0; i < code_len; i++, ip++) {
 			if (ip < (u8 *)PAGE_OFFSET ||
-				probe_kernel_address(ip, c)) {
+					probe_kernel_address(ip, c)) {
 				printk(" Bad EIP value.");
 				break;
 			}
@@ -384,7 +364,53 @@ int is_valid_bugaddr(unsigned long ip)
 	return ud2 == 0x0b0f;
 }
 
-static int die_counter;
+static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
+
+unsigned __kprobes long oops_begin(void)
+{
+	unsigned long flags;
+
+	oops_enter();
+
+	if (die_owner != raw_smp_processor_id()) {
+		console_verbose();
+		raw_local_irq_save(flags);
+		__raw_spin_lock(&die_lock);
+		die_owner = smp_processor_id();
+		die_nest_count = 0;
+		bust_spinlocks(1);
+	} else {
+		raw_local_irq_save(flags);
+	}
+	die_nest_count++;
+	return flags;
+}
+
+void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
+{
+	bust_spinlocks(0);
+	die_owner = -1;
+	add_taint(TAINT_DIE);
+	__raw_spin_unlock(&die_lock);
+	raw_local_irq_restore(flags);
+
+	if (!regs)
+		return;
+
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops)
+		panic("Fatal exception");
+
+	oops_exit();
+	do_exit(signr);
+}
 
 int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 {
@@ -402,26 +428,22 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 	printk("DEBUG_PAGEALLOC");
 #endif
 	printk("\n");
-
 	if (notify_die(DIE_OOPS, str, regs, err,
-			current->thread.trap_no, SIGSEGV) != NOTIFY_STOP) {
-
-		show_registers(regs);
-		/* Executive summary in case the oops scrolled away */
-		sp = (unsigned long) (&regs->sp);
-		savesegment(ss, ss);
-		if (user_mode(regs)) {
-			sp = regs->sp;
-			ss = regs->ss & 0xffff;
-		}
-		printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
-		print_symbol("%s", regs->ip);
-		printk(" SS:ESP %04x:%08lx\n", ss, sp);
+			current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+		return 1;
 
-		return 0;
+	show_registers(regs);
+	/* Executive summary in case the oops scrolled away */
+	sp = (unsigned long) (&regs->sp);
+	savesegment(ss, ss);
+	if (user_mode(regs)) {
+		sp = regs->sp;
+		ss = regs->ss & 0xffff;
 	}
-
-	return 1;
+	printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
+	print_symbol("%s", regs->ip);
+	printk(" SS:ESP %04x:%08lx\n", ss, sp);
+	return 0;
 }
 
 /*
@@ -430,31 +452,9 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
  */
 void die(const char *str, struct pt_regs *regs, long err)
 {
-	static struct {
-		raw_spinlock_t lock;
-		u32 lock_owner;
-		int lock_owner_depth;
-	} die = {
-		.lock =			__RAW_SPIN_LOCK_UNLOCKED,
-		.lock_owner =		-1,
-		.lock_owner_depth =	0
-	};
-	unsigned long flags;
-
-	oops_enter();
-
-	if (die.lock_owner != raw_smp_processor_id()) {
-		console_verbose();
-		raw_local_irq_save(flags);
-		__raw_spin_lock(&die.lock);
-		die.lock_owner = smp_processor_id();
-		die.lock_owner_depth = 0;
-		bust_spinlocks(1);
-	} else {
-		raw_local_irq_save(flags);
-	}
+	unsigned long flags = oops_begin();
 
-	if (++die.lock_owner_depth < 3) {
+	if (die_nest_count < 3) {
 		report_bug(regs->ip, regs);
 
 		if (__die(str, regs, err))
@@ -463,26 +463,7 @@ void die(const char *str, struct pt_regs *regs, long err)
 		printk(KERN_EMERG "Recursive die() failure, output suppressed\n");
 	}
 
-	bust_spinlocks(0);
-	die.lock_owner = -1;
-	add_taint(TAINT_DIE);
-	__raw_spin_unlock(&die.lock);
-	raw_local_irq_restore(flags);
-
-	if (!regs)
-		return;
-
-	if (kexec_should_crash(current))
-		crash_kexec(regs);
-
-	if (in_interrupt())
-		panic("Fatal exception in interrupt");
-
-	if (panic_on_oops)
-		panic("Fatal exception");
-
-	oops_exit();
-	do_exit(SIGSEGV);
+	oops_end(flags, regs, SIGSEGV);
 }
 
 static inline void
@@ -546,7 +527,7 @@ void do_##name(struct pt_regs *regs, long error_code)			\
 {									\
 	trace_hardirqs_fixup();						\
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-						== NOTIFY_STOP)		\
+							== NOTIFY_STOP)	\
 		return;							\
 	do_trap(trapnr, signr, str, 0, regs, error_code, NULL);		\
 }
@@ -562,7 +543,7 @@ void do_##name(struct pt_regs *regs, long error_code)			\
 	info.si_code = sicode;						\
 	info.si_addr = (void __user *)siaddr;				\
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-						== NOTIFY_STOP)		\
+							== NOTIFY_STOP)	\
 		return;							\
 	do_trap(trapnr, signr, str, 0, regs, error_code, &info);	\
 }
@@ -571,7 +552,7 @@ void do_##name(struct pt_regs *regs, long error_code)			\
 void do_##name(struct pt_regs *regs, long error_code)			\
 {									\
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-						== NOTIFY_STOP)		\
+							== NOTIFY_STOP)	\
 		return;							\
 	do_trap(trapnr, signr, str, 1, regs, error_code, NULL);		\
 }
@@ -586,27 +567,29 @@ void do_##name(struct pt_regs *regs, long error_code)			\
 	info.si_addr = (void __user *)siaddr;				\
 	trace_hardirqs_fixup();						\
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-						== NOTIFY_STOP)		\
+							== NOTIFY_STOP)	\
 		return;							\
 	do_trap(trapnr, signr, str, 1, regs, error_code, &info);	\
 }
 
-DO_VM86_ERROR_INFO(0, SIGFPE,  "divide error", divide_error, FPE_INTDIV, regs->ip)
+DO_VM86_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
 #ifndef CONFIG_KPROBES
 DO_VM86_ERROR(3, SIGTRAP, "int3", int3)
 #endif
 DO_VM86_ERROR(4, SIGSEGV, "overflow", overflow)
 DO_VM86_ERROR(5, SIGSEGV, "bounds", bounds)
-DO_ERROR_INFO(6, SIGILL,  "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0)
-DO_ERROR(9, SIGFPE,  "coprocessor segment overrun", coprocessor_segment_overrun)
+DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0)
+DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
-DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
-DO_ERROR(12, SIGBUS,  "stack segment", stack_segment)
+DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
+DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0)
 DO_ERROR_INFO(32, SIGILL, "iret exception", iret_error, ILL_BADSTK, 0, 1)
 
-void __kprobes do_general_protection(struct pt_regs *regs, long error_code)
+void __kprobes
+do_general_protection(struct pt_regs *regs, long error_code)
 {
+	struct task_struct *tsk;
 	struct thread_struct *thread;
 	struct tss_struct *tss;
 	int cpu;
@@ -647,23 +630,24 @@ void __kprobes do_general_protection(struct pt_regs *regs, long error_code)
 	if (regs->flags & X86_VM_MASK)
 		goto gp_in_vm86;
 
+	tsk = current;
 	if (!user_mode(regs))
 		goto gp_in_kernel;
 
-	current->thread.error_code = error_code;
-	current->thread.trap_no = 13;
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 13;
 
-	if (show_unhandled_signals && unhandled_signal(current, SIGSEGV) &&
-	    printk_ratelimit()) {
+	if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+			printk_ratelimit()) {
 		printk(KERN_INFO
-		    "%s[%d] general protection ip:%lx sp:%lx error:%lx",
-		    current->comm, task_pid_nr(current),
-		    regs->ip, regs->sp, error_code);
+			"%s[%d] general protection ip:%lx sp:%lx error:%lx",
+			tsk->comm, task_pid_nr(tsk),
+			regs->ip, regs->sp, error_code);
 		print_vma_addr(" in ", regs->ip);
 		printk("\n");
 	}
 
-	force_sig(SIGSEGV, current);
+	force_sig(SIGSEGV, tsk);
 	return;
 
 gp_in_vm86:
@@ -672,14 +656,15 @@ gp_in_vm86:
 	return;
 
 gp_in_kernel:
-	if (!fixup_exception(regs)) {
-		current->thread.error_code = error_code;
-		current->thread.trap_no = 13;
-		if (notify_die(DIE_GPF, "general protection fault", regs,
+	if (fixup_exception(regs))
+		return;
+
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 13;
+	if (notify_die(DIE_GPF, "general protection fault", regs,
 				error_code, 13, SIGSEGV) == NOTIFY_STOP)
-			return;
-		die("general protection fault", regs, error_code);
-	}
+		return;
+	die("general protection fault", regs, error_code);
 }
 
 static notrace __kprobes void
@@ -756,9 +741,9 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 
 static DEFINE_SPINLOCK(nmi_print_lock);
 
-void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
+void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
 {
-	if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP)
+	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
 		return;
 
 	spin_lock(&nmi_print_lock);
@@ -767,10 +752,12 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
 	* to get a message out:
 	*/
 	bust_spinlocks(1);
-	printk(KERN_EMERG "%s", msg);
+	printk(KERN_EMERG "%s", str);
 	printk(" on CPU%d, ip %08lx, registers:\n",
 		smp_processor_id(), regs->ip);
 	show_registers(regs);
+	if (do_panic)
+		panic("Non maskable interrupt");
 	console_silent();
 	spin_unlock(&nmi_print_lock);
 	bust_spinlocks(0);
@@ -790,14 +777,17 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
 static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 {
 	unsigned char reason = 0;
+	int cpu;
 
-	/* Only the BSP gets external NMIs from the system: */
-	if (!smp_processor_id())
+	cpu = smp_processor_id();
+
+	/* Only the BSP gets external NMIs from the system. */
+	if (!cpu)
 		reason = get_nmi_reason();
 
 	if (!(reason & 0xc0)) {
 		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
-							== NOTIFY_STOP)
+								== NOTIFY_STOP)
 			return;
 #ifdef CONFIG_X86_LOCAL_APIC
 		/*
@@ -806,7 +796,7 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 		 */
 		if (nmi_watchdog_tick(regs, reason))
 			return;
-		if (!do_nmi_callback(regs, smp_processor_id()))
+		if (!do_nmi_callback(regs, cpu))
 			unknown_nmi_error(reason, regs);
 #else
 		unknown_nmi_error(reason, regs);
@@ -816,6 +806,8 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 	}
 	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
 		return;
+
+	/* AK: following checks seem to be broken on modern chipsets. FIXME */
 	if (reason & 0x80)
 		mem_parity_error(reason, regs);
 	if (reason & 0x40)
@@ -827,8 +819,6 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 	reassert_nmi();
 }
 
-static int ignore_nmis;
-
 notrace __kprobes void do_nmi(struct pt_regs *regs, long error_code)
 {
 	int cpu;
@@ -913,7 +903,7 @@ void __kprobes do_debug(struct pt_regs *regs, long error_code)
 	tsk->thread.debugctlmsr = 0;
 
 	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
-					SIGTRAP) == NOTIFY_STOP)
+						SIGTRAP) == NOTIFY_STOP)
 		return;
 	/* It's safe to allow irq's after DR6 has been saved */
 	if (regs->flags & X86_EFLAGS_IF)
@@ -974,9 +964,8 @@ clear_TF_reenable:
 void math_error(void __user *ip)
 {
 	struct task_struct *task;
-	unsigned short cwd;
-	unsigned short swd;
 	siginfo_t info;
+	unsigned short cwd, swd;
 
 	/*
 	 * Save the info for the exception handler and clear the error.
@@ -995,7 +984,7 @@ void math_error(void __user *ip)
 	 * C1 reg you need in case of a stack fault, 0x040 is the stack
 	 * fault bit.  We should only be taking one exception at a time,
 	 * so if this combination doesn't produce any single exception,
-	 * then we have a bad program that isn't syncronizing its FPU usage
+	 * then we have a bad program that isn't synchronizing its FPU usage
 	 * and it will suffer the consequences since we won't be able to
 	 * fully reproduce the context of the exception
 	 */
@@ -1004,7 +993,7 @@ void math_error(void __user *ip)
 	switch (swd & ~cwd & 0x3f) {
 	case 0x000: /* No unmasked exception */
 		return;
-	default:    /* Multiple exceptions */
+	default: /* Multiple exceptions */
 		break;
 	case 0x001: /* Invalid Op */
 		/*
@@ -1040,8 +1029,8 @@ void do_coprocessor_error(struct pt_regs *regs, long error_code)
 static void simd_math_error(void __user *ip)
 {
 	struct task_struct *task;
-	unsigned short mxcsr;
 	siginfo_t info;
+	unsigned short mxcsr;
 
 	/*
 	 * Save the info for the exception handler and clear the error.
@@ -1117,7 +1106,7 @@ void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
 
 unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
 {
-	struct desc_struct *gdt = __get_cpu_var(gdt_page).gdt;
+	struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
 	unsigned long base = (kesp - uesp) & -THREAD_SIZE;
 	unsigned long new_kesp = kesp - base;
 	unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
@@ -1196,19 +1185,16 @@ void __init trap_init(void)
 	early_iounmap(p, 4);
 #endif
 
-#ifdef CONFIG_X86_LOCAL_APIC
-	init_apic_mappings();
-#endif
-	set_trap_gate(0,  &divide_error);
-	set_intr_gate(1,  &debug);
-	set_intr_gate(2,  &nmi);
-	set_system_intr_gate(3, &int3); /* int3/4 can be called from all */
-	set_system_gate(4, &overflow);
-	set_trap_gate(5,  &bounds);
-	set_trap_gate(6,  &invalid_op);
-	set_trap_gate(7,  &device_not_available);
-	set_task_gate(8,  GDT_ENTRY_DOUBLEFAULT_TSS);
-	set_trap_gate(9,  &coprocessor_segment_overrun);
+	set_trap_gate(0, &divide_error);
+	set_intr_gate(1, &debug);
+	set_intr_gate(2, &nmi);
+	set_system_intr_gate(3, &int3); /* int3 can be called from all */
+	set_system_gate(4, &overflow); /* int4 can be called from all */
+	set_trap_gate(5, &bounds);
+	set_trap_gate(6, &invalid_op);
+	set_trap_gate(7, &device_not_available);
+	set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
+	set_trap_gate(9, &coprocessor_segment_overrun);
 	set_trap_gate(10, &invalid_TSS);
 	set_trap_gate(11, &segment_not_present);
 	set_trap_gate(12, &stack_segment);
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index adff76ea97c4..3f18d73f420c 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -10,73 +10,56 @@
  * 'Traps.c' handles hardware traps and faults after we have saved some
  * state in 'entry.S'.
  */
-#include <linux/sched.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/spinlock.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/utsname.h>
+#include <linux/kdebug.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
 #include <linux/string.h>
+#include <linux/unwind.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
-#include <linux/ptrace.h>
+#include <linux/kexec.h>
+#include <linux/sched.h>
 #include <linux/timer.h>
-#include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/kallsyms.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/nmi.h>
-#include <linux/kprobes.h>
-#include <linux/kexec.h>
-#include <linux/unwind.h>
-#include <linux/uaccess.h>
 #include <linux/bug.h>
-#include <linux/kdebug.h>
-#include <linux/utsname.h>
-
-#include <mach_traps.h>
+#include <linux/nmi.h>
+#include <linux/mm.h>
 
 #if defined(CONFIG_EDAC)
 #include <linux/edac.h>
 #endif
 
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/atomic.h>
+#include <asm/stacktrace.h>
+#include <asm/processor.h>
 #include <asm/debugreg.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/unwind.h>
 #include <asm/desc.h>
 #include <asm/i387.h>
-#include <asm/processor.h>
-#include <asm/unwind.h>
+#include <asm/nmi.h>
 #include <asm/smp.h>
+#include <asm/io.h>
 #include <asm/pgalloc.h>
-#include <asm/pda.h>
 #include <asm/proto.h>
-#include <asm/nmi.h>
-#include <asm/stacktrace.h>
+#include <asm/pda.h>
+#include <asm/traps.h>
 
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-asmlinkage void double_fault(void);
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void simd_coprocessor_error(void);
-asmlinkage void reserved(void);
-asmlinkage void alignment_check(void);
-asmlinkage void machine_check(void);
-asmlinkage void spurious_interrupt_bug(void);
+#include <mach_traps.h>
 
+int panic_on_unrecovered_nmi;
+int kstack_depth_to_print = 12;
 static unsigned int code_bytes = 64;
+static int ignore_nmis;
+static int die_counter;
 
 static inline void conditional_sti(struct pt_regs *regs)
 {
@@ -100,34 +83,9 @@ static inline void preempt_conditional_cli(struct pt_regs *regs)
 	dec_preempt_count();
 }
 
-int kstack_depth_to_print = 12;
-
 void printk_address(unsigned long address, int reliable)
 {
-#ifdef CONFIG_KALLSYMS
-	unsigned long offset = 0, symsize;
-	const char *symname;
-	char *modname;
-	char *delim = ":";
-	char namebuf[KSYM_NAME_LEN];
-	char reliab[4] = "";
-
-	symname = kallsyms_lookup(address, &symsize, &offset,
-					&modname, namebuf);
-	if (!symname) {
-		printk(" [<%016lx>]\n", address);
-		return;
-	}
-	if (!reliable)
-		strcpy(reliab, "? ");
-
-	if (!modname)
-		modname = delim = "";
-	printk(" [<%016lx>] %s%s%s%s%s+0x%lx/0x%lx\n",
-		address, reliab, delim, modname, delim, symname, offset, symsize);
-#else
-	printk(" [<%016lx>]\n", address);
-#endif
+	printk(" [<%016lx>] %s%pS\n", address, reliable ? "": "? ", (void *) address);
 }
 
 static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
@@ -204,8 +162,6 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 	return NULL;
 }
 
-#define MSG(txt) ops->warning(data, txt)
-
 /*
  * x86-64 can have up to three kernel stacks: 
  * process stack
@@ -232,11 +188,11 @@ struct stack_frame {
 	unsigned long return_address;
 };
 
-
-static inline unsigned long print_context_stack(struct thread_info *tinfo,
-				unsigned long *stack, unsigned long bp,
-				const struct stacktrace_ops *ops, void *data,
-				unsigned long *end)
+static inline unsigned long
+print_context_stack(struct thread_info *tinfo,
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data,
+		unsigned long *end)
 {
 	struct stack_frame *frame = (struct stack_frame *)bp;
 
@@ -258,7 +214,7 @@ static inline unsigned long print_context_stack(struct thread_info *tinfo,
 	return bp;
 }
 
-void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
+void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
 		const struct stacktrace_ops *ops, void *data)
 {
@@ -267,36 +223,34 @@ void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
 	unsigned used = 0;
 	struct thread_info *tinfo;
 
-	if (!tsk)
-		tsk = current;
-	tinfo = task_thread_info(tsk);
+	if (!task)
+		task = current;
 
 	if (!stack) {
 		unsigned long dummy;
 		stack = &dummy;
-		if (tsk && tsk != current)
-			stack = (unsigned long *)tsk->thread.sp;
+		if (task && task != current)
+			stack = (unsigned long *)task->thread.sp;
 	}
 
 #ifdef CONFIG_FRAME_POINTER
 	if (!bp) {
-		if (tsk == current) {
+		if (task == current) {
 			/* Grab bp right from our regs */
-			asm("movq %%rbp, %0" : "=r" (bp):);
+			asm("movq %%rbp, %0" : "=r" (bp) :);
 		} else {
 			/* bp is the last reg pushed by switch_to */
-			bp = *(unsigned long *) tsk->thread.sp;
+			bp = *(unsigned long *) task->thread.sp;
 		}
 	}
 #endif
 
-
-
 	/*
 	 * Print function call entries in all stacks, starting at the
 	 * current stack address. If the stacks consist of nested
 	 * exceptions
 	 */
+	tinfo = task_thread_info(task);
 	for (;;) {
 		char *id;
 		unsigned long *estack_end;
@@ -381,18 +335,24 @@ static const struct stacktrace_ops print_trace_ops = {
 	.address = print_trace_address,
 };
 
-void
-show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack,
-		unsigned long bp)
+static void
+show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp, char *log_lvl)
 {
 	printk("\nCall Trace:\n");
-	dump_trace(tsk, regs, stack, bp, &print_trace_ops, NULL);
+	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
 	printk("\n");
 }
 
+void show_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp)
+{
+	show_trace_log_lvl(task, regs, stack, bp, "");
+}
+
 static void
-_show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *sp,
-							unsigned long bp)
+show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *sp, unsigned long bp, char *log_lvl)
 {
 	unsigned long *stack;
 	int i;
@@ -404,14 +364,14 @@ _show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *sp,
 	// back trace for this cpu.
 
 	if (sp == NULL) {
-		if (tsk)
-			sp = (unsigned long *)tsk->thread.sp;
+		if (task)
+			sp = (unsigned long *)task->thread.sp;
 		else
 			sp = (unsigned long *)&sp;
 	}
 
 	stack = sp;
-	for(i=0; i < kstack_depth_to_print; i++) {
+	for (i = 0; i < kstack_depth_to_print; i++) {
 		if (stack >= irqstack && stack <= irqstack_end) {
 			if (stack == irqstack_end) {
 				stack = (unsigned long *) (irqstack_end[-1]);
@@ -426,12 +386,12 @@ _show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *sp,
 		printk(" %016lx", *stack++);
 		touch_nmi_watchdog();
 	}
-	show_trace(tsk, regs, sp, bp);
+	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
 }
 
-void show_stack(struct task_struct *tsk, unsigned long * sp)
+void show_stack(struct task_struct *task, unsigned long *sp)
 {
-	_show_stack(tsk, NULL, sp, 0);
+	show_stack_log_lvl(task, NULL, sp, 0, "");
 }
 
 /*
@@ -439,8 +399,8 @@ void show_stack(struct task_struct *tsk, unsigned long * sp)
  */
 void dump_stack(void)
 {
-	unsigned long dummy;
 	unsigned long bp = 0;
+	unsigned long stack;
 
 #ifdef CONFIG_FRAME_POINTER
 	if (!bp)
@@ -452,7 +412,7 @@ void dump_stack(void)
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
-	show_trace(NULL, NULL, &dummy, bp);
+	show_trace(NULL, NULL, &stack, bp);
 }
 
 EXPORT_SYMBOL(dump_stack);
@@ -463,12 +423,8 @@ void show_registers(struct pt_regs *regs)
 	unsigned long sp;
 	const int cpu = smp_processor_id();
 	struct task_struct *cur = cpu_pda(cpu)->pcurrent;
-	u8 *ip;
-	unsigned int code_prologue = code_bytes * 43 / 64;
-	unsigned int code_len = code_bytes;
 
 	sp = regs->sp;
-	ip = (u8 *) regs->ip - code_prologue;
 	printk("CPU %d ", cpu);
 	__show_regs(regs);
 	printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
@@ -479,15 +435,22 @@ void show_registers(struct pt_regs *regs)
 	 * time of the fault..
 	 */
 	if (!user_mode(regs)) {
+		unsigned int code_prologue = code_bytes * 43 / 64;
+		unsigned int code_len = code_bytes;
 		unsigned char c;
+		u8 *ip;
+
 		printk("Stack: ");
-		_show_stack(NULL, regs, (unsigned long *)sp, regs->bp);
+		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
+				regs->bp, "");
 		printk("\n");
 
 		printk(KERN_EMERG "Code: ");
+
+		ip = (u8 *)regs->ip - code_prologue;
 		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
 			/* try starting at RIP */
-			ip = (u8 *) regs->ip;
+			ip = (u8 *)regs->ip;
 			code_len = code_len - code_prologue + 1;
 		}
 		for (i = 0; i < code_len; i++, ip++) {
@@ -503,7 +466,7 @@ void show_registers(struct pt_regs *regs)
 		}
 	}
 	printk("\n");
-}	
+}
 
 int is_valid_bugaddr(unsigned long ip)
 {
@@ -543,7 +506,7 @@ unsigned __kprobes long oops_begin(void)
 }
 
 void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
-{ 
+{
 	die_owner = -1;
 	bust_spinlocks(0);
 	die_nest_count--;
@@ -561,10 +524,9 @@ void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
 	do_exit(signr);
 }
 
-int __kprobes __die(const char * str, struct pt_regs * regs, long err)
+int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 {
-	static int die_counter;
-	printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff,++die_counter);
+	printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff, ++die_counter);
 #ifdef CONFIG_PREEMPT
 	printk("PREEMPT ");
 #endif
@@ -575,8 +537,10 @@ int __kprobes __die(const char * str, struct pt_regs * regs, long err)
 	printk("DEBUG_PAGEALLOC");
 #endif
 	printk("\n");
-	if (notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+	if (notify_die(DIE_OOPS, str, regs, err,
+			current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
 		return 1;
+
 	show_registers(regs);
 	add_taint(TAINT_DIE);
 	/* Executive summary in case the oops scrolled away */
@@ -588,7 +552,7 @@ int __kprobes __die(const char * str, struct pt_regs * regs, long err)
 	return 0;
 }
 
-void die(const char * str, struct pt_regs * regs, long err)
+void die(const char *str, struct pt_regs *regs, long err)
 {
 	unsigned long flags = oops_begin();
 
@@ -605,8 +569,7 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic)
 {
 	unsigned long flags;
 
-	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) ==
-	    NOTIFY_STOP)
+	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
 		return;
 
 	flags = oops_begin();
@@ -614,7 +577,9 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic)
 	 * We are in trouble anyway, lets at least try
 	 * to get a message out.
 	 */
-	printk(str, smp_processor_id());
+	printk(KERN_EMERG "%s", str);
+	printk(" on CPU%d, ip %08lx, registers:\n",
+		smp_processor_id(), regs->ip);
 	show_registers(regs);
 	if (kexec_should_crash(current))
 		crash_kexec(regs);
@@ -626,44 +591,44 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic)
 	do_exit(SIGBUS);
 }
 
-static void __kprobes do_trap(int trapnr, int signr, char *str,
-			      struct pt_regs * regs, long error_code,
-			      siginfo_t *info)
+static void __kprobes
+do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
+	long error_code, siginfo_t *info)
 {
 	struct task_struct *tsk = current;
 
-	if (user_mode(regs)) {
-		/*
-		 * We want error_code and trap_no set for userspace
-		 * faults and kernelspace faults which result in
-		 * die(), but not kernelspace faults which are fixed
-		 * up.  die() gives the process no chance to handle
-		 * the signal and notice the kernel fault information,
-		 * so that won't result in polluting the information
-		 * about previously queued, but not yet delivered,
-		 * faults.  See also do_general_protection below.
-		 */
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = trapnr;
-
-		if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
-		    printk_ratelimit()) {
-			printk(KERN_INFO
-			       "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
-			       tsk->comm, tsk->pid, str,
-			       regs->ip, regs->sp, error_code);
-			print_vma_addr(" in ", regs->ip);
-			printk("\n");
-		}
+	if (!user_mode(regs))
+		goto kernel_trap;
 
-		if (info)
-			force_sig_info(signr, info, tsk);
-		else
-			force_sig(signr, tsk);
-		return;
+	/*
+	 * We want error_code and trap_no set for userspace faults and
+	 * kernelspace faults which result in die(), but not
+	 * kernelspace faults which are fixed up.  die() gives the
+	 * process no chance to handle the signal and notice the
+	 * kernel fault information, so that won't result in polluting
+	 * the information about previously queued, but not yet
+	 * delivered, faults.  See also do_general_protection below.
+	 */
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = trapnr;
+
+	if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
+	    printk_ratelimit()) {
+		printk(KERN_INFO
+		       "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
+		       tsk->comm, tsk->pid, str,
+		       regs->ip, regs->sp, error_code);
+		print_vma_addr(" in ", regs->ip);
+		printk("\n");
 	}
 
+	if (info)
+		force_sig_info(signr, info, tsk);
+	else
+		force_sig(signr, tsk);
+	return;
 
+kernel_trap:
 	if (!fixup_exception(regs)) {
 		tsk->thread.error_code = error_code;
 		tsk->thread.trap_no = trapnr;
@@ -673,41 +638,39 @@ static void __kprobes do_trap(int trapnr, int signr, char *str,
 }
 
 #define DO_ERROR(trapnr, signr, str, name) \
-asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-							== NOTIFY_STOP) \
-		return; \
+asmlinkage void do_##name(struct pt_regs * regs, long error_code)	\
+{									\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+							== NOTIFY_STOP)	\
+		return;							\
 	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, NULL); \
+	do_trap(trapnr, signr, str, regs, error_code, NULL);		\
 }
 
-#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
-asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	siginfo_t info; \
-	info.si_signo = signr; \
-	info.si_errno = 0; \
-	info.si_code = sicode; \
-	info.si_addr = (void __user *)siaddr; \
-	trace_hardirqs_fixup(); \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-							== NOTIFY_STOP) \
-		return; \
+#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)		\
+asmlinkage void do_##name(struct pt_regs * regs, long error_code)	\
+{									\
+	siginfo_t info;							\
+	info.si_signo = signr;						\
+	info.si_errno = 0;						\
+	info.si_code = sicode;						\
+	info.si_addr = (void __user *)siaddr;				\
+	trace_hardirqs_fixup();						\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+							== NOTIFY_STOP)	\
+		return;							\
 	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, &info); \
+	do_trap(trapnr, signr, str, regs, error_code, &info);		\
 }
 
-DO_ERROR_INFO( 0, SIGFPE,  "divide error", divide_error, FPE_INTDIV, regs->ip)
-DO_ERROR( 4, SIGSEGV, "overflow", overflow)
-DO_ERROR( 5, SIGSEGV, "bounds", bounds)
-DO_ERROR_INFO( 6, SIGILL,  "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
-DO_ERROR( 7, SIGSEGV, "device not available", device_not_available)
-DO_ERROR( 9, SIGFPE,  "coprocessor segment overrun", coprocessor_segment_overrun)
+DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
+DO_ERROR(4, SIGSEGV, "overflow", overflow)
+DO_ERROR(5, SIGSEGV, "bounds", bounds)
+DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
+DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
-DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
+DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
-DO_ERROR(18, SIGSEGV, "reserved", reserved)
 
 /* Runs on IST stack */
 asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code)
@@ -737,31 +700,34 @@ asmlinkage void do_double_fault(struct pt_regs * regs, long error_code)
 		die(str, regs, error_code);
 }
 
-asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
-						long error_code)
+asmlinkage void __kprobes
+do_general_protection(struct pt_regs *regs, long error_code)
 {
-	struct task_struct *tsk = current;
+	struct task_struct *tsk;
 
 	conditional_sti(regs);
 
-	if (user_mode(regs)) {
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = 13;
-
-		if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
-		    printk_ratelimit()) {
-			printk(KERN_INFO
-		       "%s[%d] general protection ip:%lx sp:%lx error:%lx",
-			       tsk->comm, tsk->pid,
-			       regs->ip, regs->sp, error_code);
-			print_vma_addr(" in ", regs->ip);
-			printk("\n");
-		}
+	tsk = current;
+	if (!user_mode(regs))
+		goto gp_in_kernel;
 
-		force_sig(SIGSEGV, tsk);
-		return;
-	} 
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 13;
+
+	if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+			printk_ratelimit()) {
+		printk(KERN_INFO
+			"%s[%d] general protection ip:%lx sp:%lx error:%lx",
+			tsk->comm, tsk->pid,
+			regs->ip, regs->sp, error_code);
+		print_vma_addr(" in ", regs->ip);
+		printk("\n");
+	}
+
+	force_sig(SIGSEGV, tsk);
+	return;
 
+gp_in_kernel:
 	if (fixup_exception(regs))
 		return;
 
@@ -774,14 +740,14 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
 }
 
 static notrace __kprobes void
-mem_parity_error(unsigned char reason, struct pt_regs * regs)
+mem_parity_error(unsigned char reason, struct pt_regs *regs)
 {
 	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
 		reason);
 	printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n");
 
 #if defined(CONFIG_EDAC)
-	if(edac_handler_set()) {
+	if (edac_handler_set()) {
 		edac_atomic_assert_error();
 		return;
 	}
@@ -798,7 +764,7 @@ mem_parity_error(unsigned char reason, struct pt_regs * regs)
 }
 
 static notrace __kprobes void
-io_check_error(unsigned char reason, struct pt_regs * regs)
+io_check_error(unsigned char reason, struct pt_regs *regs)
 {
 	printk("NMI: IOCK error (debug interrupt?)\n");
 	show_registers(regs);
@@ -828,14 +794,14 @@ unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
 
 /* Runs on IST stack. This code must keep interrupts off all the time.
    Nested NMIs are prevented by the CPU. */
-asmlinkage notrace  __kprobes void default_do_nmi(struct pt_regs *regs)
+asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 {
 	unsigned char reason = 0;
 	int cpu;
 
 	cpu = smp_processor_id();
 
-	/* Only the BSP gets external NMIs from the system.  */
+	/* Only the BSP gets external NMIs from the system. */
 	if (!cpu)
 		reason = get_nmi_reason();
 
@@ -847,32 +813,57 @@ asmlinkage notrace  __kprobes void default_do_nmi(struct pt_regs *regs)
 		 * Ok, so this is none of the documented NMI sources,
 		 * so it must be the NMI watchdog.
 		 */
-		if (nmi_watchdog_tick(regs,reason))
+		if (nmi_watchdog_tick(regs, reason))
 			return;
-		if (!do_nmi_callback(regs,cpu))
+		if (!do_nmi_callback(regs, cpu))
 			unknown_nmi_error(reason, regs);
 
 		return;
 	}
 	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
-		return; 
+		return;
 
 	/* AK: following checks seem to be broken on modern chipsets. FIXME */
-
 	if (reason & 0x80)
 		mem_parity_error(reason, regs);
 	if (reason & 0x40)
 		io_check_error(reason, regs);
 }
 
+asmlinkage notrace __kprobes void
+do_nmi(struct pt_regs *regs, long error_code)
+{
+	nmi_enter();
+
+	add_pda(__nmi_count, 1);
+
+	if (!ignore_nmis)
+		default_do_nmi(regs);
+
+	nmi_exit();
+}
+
+void stop_nmi(void)
+{
+	acpi_nmi_disable();
+	ignore_nmis++;
+}
+
+void restart_nmi(void)
+{
+	ignore_nmis--;
+	acpi_nmi_enable();
+}
+
 /* runs on IST stack. */
-asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code)
+asmlinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
 {
 	trace_hardirqs_fixup();
 
-	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) {
+	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
+			== NOTIFY_STOP)
 		return;
-	}
+
 	preempt_conditional_sti(regs);
 	do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
 	preempt_conditional_cli(regs);
@@ -903,8 +894,8 @@ asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
 asmlinkage void __kprobes do_debug(struct pt_regs * regs,
 				   unsigned long error_code)
 {
-	unsigned long condition;
 	struct task_struct *tsk = current;
+	unsigned long condition;
 	siginfo_t info;
 
 	trace_hardirqs_fixup();
@@ -925,21 +916,19 @@ asmlinkage void __kprobes do_debug(struct pt_regs * regs,
 
 	/* Mask out spurious debug traps due to lazy DR7 setting */
 	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
-		if (!tsk->thread.debugreg7) { 
+		if (!tsk->thread.debugreg7)
 			goto clear_dr7;
-		}
 	}
 
 	tsk->thread.debugreg6 = condition;
 
-
 	/*
 	 * Single-stepping through TF: make sure we ignore any events in
 	 * kernel space (but re-enable TF when returning to user mode).
 	 */
 	if (condition & DR_STEP) {
-                if (!user_mode(regs))
-                       goto clear_TF_reenable;
+		if (!user_mode(regs))
+			goto clear_TF_reenable;
 	}
 
 	/* Ok, finally something we can handle */
@@ -952,7 +941,7 @@ asmlinkage void __kprobes do_debug(struct pt_regs * regs,
 	force_sig_info(SIGTRAP, &info, tsk);
 
 clear_dr7:
-	set_debugreg(0UL, 7);
+	set_debugreg(0, 7);
 	preempt_conditional_cli(regs);
 	return;
 
@@ -960,6 +949,7 @@ clear_TF_reenable:
 	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
 	regs->flags &= ~X86_EFLAGS_TF;
 	preempt_conditional_cli(regs);
+	return;
 }
 
 static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
@@ -982,7 +972,7 @@ static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
 asmlinkage void do_coprocessor_error(struct pt_regs *regs)
 {
 	void __user *ip = (void __user *)(regs->ip);
-	struct task_struct * task;
+	struct task_struct *task;
 	siginfo_t info;
 	unsigned short cwd, swd;
 
@@ -1015,30 +1005,30 @@ asmlinkage void do_coprocessor_error(struct pt_regs *regs)
 	cwd = get_fpu_cwd(task);
 	swd = get_fpu_swd(task);
 	switch (swd & ~cwd & 0x3f) {
-		case 0x000:
-		default:
-			break;
-		case 0x001: /* Invalid Op */
-			/*
-			 * swd & 0x240 == 0x040: Stack Underflow
-			 * swd & 0x240 == 0x240: Stack Overflow
-			 * User must clear the SF bit (0x40) if set
-			 */
-			info.si_code = FPE_FLTINV;
-			break;
-		case 0x002: /* Denormalize */
-		case 0x010: /* Underflow */
-			info.si_code = FPE_FLTUND;
-			break;
-		case 0x004: /* Zero Divide */
-			info.si_code = FPE_FLTDIV;
-			break;
-		case 0x008: /* Overflow */
-			info.si_code = FPE_FLTOVF;
-			break;
-		case 0x020: /* Precision */
-			info.si_code = FPE_FLTRES;
-			break;
+	case 0x000: /* No unmasked exception */
+	default: /* Multiple exceptions */
+		break;
+	case 0x001: /* Invalid Op */
+		/*
+		 * swd & 0x240 == 0x040: Stack Underflow
+		 * swd & 0x240 == 0x240: Stack Overflow
+		 * User must clear the SF bit (0x40) if set
+		 */
+		info.si_code = FPE_FLTINV;
+		break;
+	case 0x002: /* Denormalize */
+	case 0x010: /* Underflow */
+		info.si_code = FPE_FLTUND;
+		break;
+	case 0x004: /* Zero Divide */
+		info.si_code = FPE_FLTDIV;
+		break;
+	case 0x008: /* Overflow */
+		info.si_code = FPE_FLTOVF;
+		break;
+	case 0x020: /* Precision */
+		info.si_code = FPE_FLTRES;
+		break;
 	}
 	force_sig_info(SIGFPE, &info, task);
 }
@@ -1051,7 +1041,7 @@ asmlinkage void bad_intr(void)
 asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs)
 {
 	void __user *ip = (void __user *)(regs->ip);
-	struct task_struct * task;
+	struct task_struct *task;
 	siginfo_t info;
 	unsigned short mxcsr;
 
@@ -1079,25 +1069,25 @@ asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs)
 	 */
 	mxcsr = get_fpu_mxcsr(task);
 	switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
-		case 0x000:
-		default:
-			break;
-		case 0x001: /* Invalid Op */
-			info.si_code = FPE_FLTINV;
-			break;
-		case 0x002: /* Denormalize */
-		case 0x010: /* Underflow */
-			info.si_code = FPE_FLTUND;
-			break;
-		case 0x004: /* Zero Divide */
-			info.si_code = FPE_FLTDIV;
-			break;
-		case 0x008: /* Overflow */
-			info.si_code = FPE_FLTOVF;
-			break;
-		case 0x020: /* Precision */
-			info.si_code = FPE_FLTRES;
-			break;
+	case 0x000:
+	default:
+		break;
+	case 0x001: /* Invalid Op */
+		info.si_code = FPE_FLTINV;
+		break;
+	case 0x002: /* Denormalize */
+	case 0x010: /* Underflow */
+		info.si_code = FPE_FLTUND;
+		break;
+	case 0x004: /* Zero Divide */
+		info.si_code = FPE_FLTDIV;
+		break;
+	case 0x008: /* Overflow */
+		info.si_code = FPE_FLTOVF;
+		break;
+	case 0x020: /* Precision */
+		info.si_code = FPE_FLTRES;
+		break;
 	}
 	force_sig_info(SIGFPE, &info, task);
 }
@@ -1115,7 +1105,7 @@ asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
 }
 
 /*
- *  'math_state_restore()' saves the current math information in the
+ * 'math_state_restore()' saves the current math information in the
  * old math state array, and gets the new ones from the current task
  *
  * Careful.. There are problems with IBM-designed IRQ13 behaviour.
@@ -1140,7 +1130,7 @@ asmlinkage void math_state_restore(void)
 		local_irq_disable();
 	}
 
-	clts();			/* Allow maths ops (or we recurse) */
+	clts();				/* Allow maths ops (or we recurse) */
 	restore_fpu_checking(&me->thread.xstate->fxsave);
 	task_thread_info(me)->status |= TS_USEDFPU;
 	me->fpu_counter++;
@@ -1149,64 +1139,61 @@ EXPORT_SYMBOL_GPL(math_state_restore);
 
 void __init trap_init(void)
 {
-	set_intr_gate(0,&divide_error);
-	set_intr_gate_ist(1,&debug,DEBUG_STACK);
-	set_intr_gate_ist(2,&nmi,NMI_STACK);
- 	set_system_gate_ist(3,&int3,DEBUG_STACK); /* int3 can be called from all */
-	set_system_gate(4,&overflow);	/* int4 can be called from all */
-	set_intr_gate(5,&bounds);
-	set_intr_gate(6,&invalid_op);
-	set_intr_gate(7,&device_not_available);
-	set_intr_gate_ist(8,&double_fault, DOUBLEFAULT_STACK);
-	set_intr_gate(9,&coprocessor_segment_overrun);
-	set_intr_gate(10,&invalid_TSS);
-	set_intr_gate(11,&segment_not_present);
-	set_intr_gate_ist(12,&stack_segment,STACKFAULT_STACK);
-	set_intr_gate(13,&general_protection);
-	set_intr_gate(14,&page_fault);
-	set_intr_gate(15,&spurious_interrupt_bug);
-	set_intr_gate(16,&coprocessor_error);
-	set_intr_gate(17,&alignment_check);
+	set_intr_gate(0, &divide_error);
+	set_intr_gate_ist(1, &debug, DEBUG_STACK);
+	set_intr_gate_ist(2, &nmi, NMI_STACK);
+ 	set_system_gate_ist(3, &int3, DEBUG_STACK); /* int3 can be called from all */
+	set_system_gate(4, &overflow); /* int4 can be called from all */
+	set_intr_gate(5, &bounds);
+	set_intr_gate(6, &invalid_op);
+	set_intr_gate(7, &device_not_available);
+	set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
+	set_intr_gate(9, &coprocessor_segment_overrun);
+	set_intr_gate(10, &invalid_TSS);
+	set_intr_gate(11, &segment_not_present);
+	set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
+	set_intr_gate(13, &general_protection);
+	set_intr_gate(14, &page_fault);
+	set_intr_gate(15, &spurious_interrupt_bug);
+	set_intr_gate(16, &coprocessor_error);
+	set_intr_gate(17, &alignment_check);
 #ifdef CONFIG_X86_MCE
-	set_intr_gate_ist(18,&machine_check, MCE_STACK); 
+	set_intr_gate_ist(18, &machine_check, MCE_STACK);
 #endif
-	set_intr_gate(19,&simd_coprocessor_error);
+	set_intr_gate(19, &simd_coprocessor_error);
 
 #ifdef CONFIG_IA32_EMULATION
 	set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
 #endif
-       
 	/*
 	 * initialize the per thread extended state:
 	 */
-        init_thread_xstate();
+	init_thread_xstate();
 	/*
-	 * Should be a barrier for any external CPU state.
+	 * Should be a barrier for any external CPU state:
 	 */
 	cpu_init();
 }
 
-
 static int __init oops_setup(char *s)
-{ 
+{
 	if (!s)
 		return -EINVAL;
 	if (!strcmp(s, "panic"))
 		panic_on_oops = 1;
 	return 0;
-} 
+}
 early_param("oops", oops_setup);
 
 static int __init kstack_setup(char *s)
 {
 	if (!s)
 		return -EINVAL;
-	kstack_depth_to_print = simple_strtoul(s,NULL,0);
+	kstack_depth_to_print = simple_strtoul(s, NULL, 0);
 	return 0;
 }
 early_param("kstack", kstack_setup);
 
-
 static int __init code_bytes_setup(char *s)
 {
 	code_bytes = simple_strtoul(s, NULL, 0);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
new file mode 100644
index 000000000000..7603c0553909
--- /dev/null
+++ b/arch/x86/kernel/tsc.c
@@ -0,0 +1,535 @@
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/acpi_pmtmr.h>
+#include <linux/cpufreq.h>
+#include <linux/dmi.h>
+#include <linux/delay.h>
+#include <linux/clocksource.h>
+#include <linux/percpu.h>
+
+#include <asm/hpet.h>
+#include <asm/timer.h>
+#include <asm/vgtod.h>
+#include <asm/time.h>
+#include <asm/delay.h>
+
+unsigned int cpu_khz;           /* TSC clocks / usec, not used here */
+EXPORT_SYMBOL(cpu_khz);
+unsigned int tsc_khz;
+EXPORT_SYMBOL(tsc_khz);
+
+/*
+ * TSC can be unstable due to cpufreq or due to unsynced TSCs
+ */
+static int tsc_unstable;
+
+/* native_sched_clock() is called before tsc_init(), so
+   we must start with the TSC soft disabled to prevent
+   erroneous rdtsc usage on !cpu_has_tsc processors */
+static int tsc_disabled = -1;
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+u64 native_sched_clock(void)
+{
+	u64 this_offset;
+
+	/*
+	 * Fall back to jiffies if there's no TSC available:
+	 * ( But note that we still use it if the TSC is marked
+	 *   unstable. We do this because unlike Time Of Day,
+	 *   the scheduler clock tolerates small errors and it's
+	 *   very important for it to be as fast as the platform
+	 *   can achive it. )
+	 */
+	if (unlikely(tsc_disabled)) {
+		/* No locking but a rare wrong value is not a big deal: */
+		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
+	}
+
+	/* read the Time Stamp Counter: */
+	rdtscll(this_offset);
+
+	/* return the value in ns */
+	return cycles_2_ns(this_offset);
+}
+
+/* We need to define a real function for sched_clock, to override the
+   weak default version */
+#ifdef CONFIG_PARAVIRT
+unsigned long long sched_clock(void)
+{
+	return paravirt_sched_clock();
+}
+#else
+unsigned long long
+sched_clock(void) __attribute__((alias("native_sched_clock")));
+#endif
+
+int check_tsc_unstable(void)
+{
+	return tsc_unstable;
+}
+EXPORT_SYMBOL_GPL(check_tsc_unstable);
+
+#ifdef CONFIG_X86_TSC
+int __init notsc_setup(char *str)
+{
+	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
+			"cannot disable TSC completely.\n");
+	tsc_disabled = 1;
+	return 1;
+}
+#else
+/*
+ * disable flag for tsc. Takes effect by clearing the TSC cpu flag
+ * in cpu/common.c
+ */
+int __init notsc_setup(char *str)
+{
+	setup_clear_cpu_cap(X86_FEATURE_TSC);
+	return 1;
+}
+#endif
+
+__setup("notsc", notsc_setup);
+
+#define MAX_RETRIES     5
+#define SMI_TRESHOLD    50000
+
+/*
+ * Read TSC and the reference counters. Take care of SMI disturbance
+ */
+static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
+{
+	u64 t1, t2;
+	int i;
+
+	for (i = 0; i < MAX_RETRIES; i++) {
+		t1 = get_cycles();
+		if (hpet)
+			*hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
+		else
+			*pm = acpi_pm_read_early();
+		t2 = get_cycles();
+		if ((t2 - t1) < SMI_TRESHOLD)
+			return t2;
+	}
+	return ULLONG_MAX;
+}
+
+/**
+ * native_calibrate_tsc - calibrate the tsc on boot
+ */
+unsigned long native_calibrate_tsc(void)
+{
+	unsigned long flags;
+	u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
+	int hpet = is_hpet_enabled();
+	unsigned int tsc_khz_val = 0;
+
+	local_irq_save(flags);
+
+	tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	outb(0xb0, 0x43);
+	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
+	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
+	tr1 = get_cycles();
+	while ((inb(0x61) & 0x20) == 0);
+	tr2 = get_cycles();
+
+	tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+
+	local_irq_restore(flags);
+
+	/*
+	 * Preset the result with the raw and inaccurate PIT
+	 * calibration value
+	 */
+	delta = (tr2 - tr1);
+	do_div(delta, 50);
+	tsc_khz_val = delta;
+
+	/* hpet or pmtimer available ? */
+	if (!hpet && !pm1 && !pm2) {
+		printk(KERN_INFO "TSC calibrated against PIT\n");
+		goto out;
+	}
+
+	/* Check, whether the sampling was disturbed by an SMI */
+	if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
+		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
+				"using PIT calibration result\n");
+		goto out;
+	}
+
+	tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+	if (hpet) {
+		printk(KERN_INFO "TSC calibrated against HPET\n");
+		if (hpet2 < hpet1)
+			hpet2 += 0x100000000ULL;
+		hpet2 -= hpet1;
+		tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+		do_div(tsc1, 1000000);
+	} else {
+		printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
+		if (pm2 < pm1)
+			pm2 += (u64)ACPI_PM_OVRRUN;
+		pm2 -= pm1;
+		tsc1 = pm2 * 1000000000LL;
+		do_div(tsc1, PMTMR_TICKS_PER_SEC);
+	}
+
+	do_div(tsc2, tsc1);
+	tsc_khz_val = tsc2;
+
+out:
+	return tsc_khz_val;
+}
+
+
+#ifdef CONFIG_X86_32
+/* Only called from the Powernow K7 cpu freq driver */
+int recalibrate_cpu_khz(void)
+{
+#ifndef CONFIG_SMP
+	unsigned long cpu_khz_old = cpu_khz;
+
+	if (cpu_has_tsc) {
+		tsc_khz = calibrate_tsc();
+		cpu_khz = tsc_khz;
+		cpu_data(0).loops_per_jiffy =
+			cpufreq_scale(cpu_data(0).loops_per_jiffy,
+					cpu_khz_old, cpu_khz);
+		return 0;
+	} else
+		return -ENODEV;
+#else
+	return -ENODEV;
+#endif
+}
+
+EXPORT_SYMBOL(recalibrate_cpu_khz);
+
+#endif /* CONFIG_X86_32 */
+
+/* Accelerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *              ns = cycles / (freq / ns_per_sec)
+ *              ns = cycles * (ns_per_sec / freq)
+ *              ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *              ns = cycles * (10^6 / cpu_khz)
+ *
+ *      Then we use scaling math (suggested by george@mvista.com) to get:
+ *              ns = cycles * (10^6 * SC / cpu_khz) / SC
+ *              ns = cycles * cyc2ns_scale / SC
+ *
+ *      And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better precision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
+ *                      -johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+
+DEFINE_PER_CPU(unsigned long, cyc2ns);
+
+static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
+{
+	unsigned long long tsc_now, ns_now;
+	unsigned long flags, *scale;
+
+	local_irq_save(flags);
+	sched_clock_idle_sleep_event();
+
+	scale = &per_cpu(cyc2ns, cpu);
+
+	rdtscll(tsc_now);
+	ns_now = __cycles_2_ns(tsc_now);
+
+	if (cpu_khz)
+		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
+
+	sched_clock_idle_wakeup_event(0);
+	local_irq_restore(flags);
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency
+ * changes.
+ *
+ * RED-PEN: On SMP we assume all CPUs run with the same frequency.  It's
+ * not that important because current Opteron setups do not support
+ * scaling on SMP anyroads.
+ *
+ * Should fix up last_tsc too. Currently gettimeofday in the
+ * first tick after the change will be slightly wrong.
+ */
+
+static unsigned int  ref_freq;
+static unsigned long loops_per_jiffy_ref;
+static unsigned long tsc_khz_ref;
+
+static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+				void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	unsigned long *lpj, dummy;
+
+	if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC))
+		return 0;
+
+	lpj = &dummy;
+	if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+#ifdef CONFIG_SMP
+		lpj = &cpu_data(freq->cpu).loops_per_jiffy;
+#else
+	lpj = &boot_cpu_data.loops_per_jiffy;
+#endif
+
+	if (!ref_freq) {
+		ref_freq = freq->old;
+		loops_per_jiffy_ref = *lpj;
+		tsc_khz_ref = tsc_khz;
+	}
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+			(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+			(val == CPUFREQ_RESUMECHANGE)) {
+		*lpj = 	cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+
+		tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
+		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+			mark_tsc_unstable("cpufreq changes");
+	}
+
+	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
+
+	return 0;
+}
+
+static struct notifier_block time_cpufreq_notifier_block = {
+	.notifier_call  = time_cpufreq_notifier
+};
+
+static int __init cpufreq_tsc(void)
+{
+	cpufreq_register_notifier(&time_cpufreq_notifier_block,
+				CPUFREQ_TRANSITION_NOTIFIER);
+	return 0;
+}
+
+core_initcall(cpufreq_tsc);
+
+#endif /* CONFIG_CPU_FREQ */
+
+/* clocksource code */
+
+static struct clocksource clocksource_tsc;
+
+/*
+ * We compare the TSC to the cycle_last value in the clocksource
+ * structure to avoid a nasty time-warp. This can be observed in a
+ * very small window right after one CPU updated cycle_last under
+ * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which
+ * is smaller than the cycle_last reference value due to a TSC which
+ * is slighty behind. This delta is nowhere else observable, but in
+ * that case it results in a forward time jump in the range of hours
+ * due to the unsigned delta calculation of the time keeping core
+ * code, which is necessary to support wrapping clocksources like pm
+ * timer.
+ */
+static cycle_t read_tsc(void)
+{
+	cycle_t ret = (cycle_t)get_cycles();
+
+	return ret >= clocksource_tsc.cycle_last ?
+		ret : clocksource_tsc.cycle_last;
+}
+
+#ifdef CONFIG_X86_64
+static cycle_t __vsyscall_fn vread_tsc(void)
+{
+	cycle_t ret = (cycle_t)vget_cycles();
+
+	return ret >= __vsyscall_gtod_data.clock.cycle_last ?
+		ret : __vsyscall_gtod_data.clock.cycle_last;
+}
+#endif
+
+static struct clocksource clocksource_tsc = {
+	.name                   = "tsc",
+	.rating                 = 300,
+	.read                   = read_tsc,
+	.mask                   = CLOCKSOURCE_MASK(64),
+	.shift                  = 22,
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS |
+				  CLOCK_SOURCE_MUST_VERIFY,
+#ifdef CONFIG_X86_64
+	.vread                  = vread_tsc,
+#endif
+};
+
+void mark_tsc_unstable(char *reason)
+{
+	if (!tsc_unstable) {
+		tsc_unstable = 1;
+		printk("Marking TSC unstable due to %s\n", reason);
+		/* Change only the rating, when not registered */
+		if (clocksource_tsc.mult)
+			clocksource_change_rating(&clocksource_tsc, 0);
+		else
+			clocksource_tsc.rating = 0;
+	}
+}
+
+EXPORT_SYMBOL_GPL(mark_tsc_unstable);
+
+static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
+{
+	printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
+			d->ident);
+	tsc_unstable = 1;
+	return 0;
+}
+
+/* List of systems that have known TSC problems */
+static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
+	{
+		.callback = dmi_mark_tsc_unstable,
+		.ident = "IBM Thinkpad 380XD",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+			DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
+		},
+	},
+	{}
+};
+
+/*
+ * Geode_LX - the OLPC CPU has a possibly a very reliable TSC
+ */
+#ifdef CONFIG_MGEODE_LX
+/* RTSC counts during suspend */
+#define RTSC_SUSP 0x100
+
+static void __init check_geode_tsc_reliable(void)
+{
+	unsigned long res_low, res_high;
+
+	rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
+	if (res_low & RTSC_SUSP)
+		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
+}
+#else
+static inline void check_geode_tsc_reliable(void) { }
+#endif
+
+/*
+ * Make an educated guess if the TSC is trustworthy and synchronized
+ * over all CPUs.
+ */
+__cpuinit int unsynchronized_tsc(void)
+{
+	if (!cpu_has_tsc || tsc_unstable)
+		return 1;
+
+#ifdef CONFIG_SMP
+	if (apic_is_clustered_box())
+		return 1;
+#endif
+
+	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		return 0;
+	/*
+	 * Intel systems are normally all synchronized.
+	 * Exceptions must mark TSC as unstable:
+	 */
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
+		/* assume multi socket systems are not synchronized: */
+		if (num_possible_cpus() > 1)
+			tsc_unstable = 1;
+	}
+
+	return tsc_unstable;
+}
+
+static void __init init_tsc_clocksource(void)
+{
+	clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
+			clocksource_tsc.shift);
+	/* lower the rating if we already know its unstable: */
+	if (check_tsc_unstable()) {
+		clocksource_tsc.rating = 0;
+		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
+	}
+	clocksource_register(&clocksource_tsc);
+}
+
+void __init tsc_init(void)
+{
+	u64 lpj;
+	int cpu;
+
+	if (!cpu_has_tsc)
+		return;
+
+	tsc_khz = calibrate_tsc();
+	cpu_khz = tsc_khz;
+
+	if (!tsc_khz) {
+		mark_tsc_unstable("could not calculate TSC khz");
+		return;
+	}
+
+#ifdef CONFIG_X86_64
+	if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
+			(boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
+		cpu_khz = calibrate_cpu();
+#endif
+
+	lpj = ((u64)tsc_khz * 1000);
+	do_div(lpj, HZ);
+	lpj_fine = lpj;
+
+	printk("Detected %lu.%03lu MHz processor.\n",
+			(unsigned long)cpu_khz / 1000,
+			(unsigned long)cpu_khz % 1000);
+
+	/*
+	 * Secondary CPUs do not run through tsc_init(), so set up
+	 * all the scale factors for all CPUs, assuming the same
+	 * speed as the bootup CPU. (cpufreq notifiers will fix this
+	 * up if their speed diverges)
+	 */
+	for_each_possible_cpu(cpu)
+		set_cyc2ns_scale(cpu_khz, cpu);
+
+	if (tsc_disabled > 0)
+		return;
+
+	/* now allow native_sched_clock() to use rdtsc */
+	tsc_disabled = 0;
+
+	use_tsc_delay();
+	/* Check and install the TSC clocksource */
+	dmi_check_system(bad_tsc_dmi_table);
+
+	if (unsynchronized_tsc())
+		mark_tsc_unstable("TSCs unsynchronized");
+
+	check_geode_tsc_reliable();
+	init_tsc_clocksource();
+}
+
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
deleted file mode 100644
index 65b70637ad97..000000000000
--- a/arch/x86/kernel/tsc_32.c
+++ /dev/null
@@ -1,451 +0,0 @@
-#include <linux/sched.h>
-#include <linux/clocksource.h>
-#include <linux/workqueue.h>
-#include <linux/cpufreq.h>
-#include <linux/jiffies.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/percpu.h>
-
-#include <asm/delay.h>
-#include <asm/tsc.h>
-#include <asm/io.h>
-#include <asm/timer.h>
-
-#include "mach_timer.h"
-
-/* native_sched_clock() is called before tsc_init(), so
-   we must start with the TSC soft disabled to prevent
-   erroneous rdtsc usage on !cpu_has_tsc processors */
-static int tsc_disabled = -1;
-
-/*
- * On some systems the TSC frequency does not
- * change with the cpu frequency. So we need
- * an extra value to store the TSC freq
- */
-unsigned int tsc_khz;
-EXPORT_SYMBOL_GPL(tsc_khz);
-
-#ifdef CONFIG_X86_TSC
-static int __init tsc_setup(char *str)
-{
-	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
-	       "cannot disable TSC completely.\n");
-	tsc_disabled = 1;
-	return 1;
-}
-#else
-/*
- * disable flag for tsc. Takes effect by clearing the TSC cpu flag
- * in cpu/common.c
- */
-static int __init tsc_setup(char *str)
-{
-	setup_clear_cpu_cap(X86_FEATURE_TSC);
-	return 1;
-}
-#endif
-
-__setup("notsc", tsc_setup);
-
-/*
- * code to mark and check if the TSC is unstable
- * due to cpufreq or due to unsynced TSCs
- */
-static int tsc_unstable;
-
-int check_tsc_unstable(void)
-{
-	return tsc_unstable;
-}
-EXPORT_SYMBOL_GPL(check_tsc_unstable);
-
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz) / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better precision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@polymtl.ca)
- *
- *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-
-DEFINE_PER_CPU(unsigned long, cyc2ns);
-
-static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
-{
-	unsigned long long tsc_now, ns_now;
-	unsigned long flags, *scale;
-
-	local_irq_save(flags);
-	sched_clock_idle_sleep_event();
-
-	scale = &per_cpu(cyc2ns, cpu);
-
-	rdtscll(tsc_now);
-	ns_now = __cycles_2_ns(tsc_now);
-
-	if (cpu_khz)
-		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
-
-	/*
-	 * Start smoothly with the new frequency:
-	 */
-	sched_clock_idle_wakeup_event(0);
-	local_irq_restore(flags);
-}
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long native_sched_clock(void)
-{
-	unsigned long long this_offset;
-
-	/*
-	 * Fall back to jiffies if there's no TSC available:
-	 * ( But note that we still use it if the TSC is marked
-	 *   unstable. We do this because unlike Time Of Day,
-	 *   the scheduler clock tolerates small errors and it's
-	 *   very important for it to be as fast as the platform
-	 *   can achive it. )
-	 */
-	if (unlikely(tsc_disabled))
-		/* No locking but a rare wrong value is not a big deal: */
-		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
-
-	/* read the Time Stamp Counter: */
-	rdtscll(this_offset);
-
-	/* return the value in ns */
-	return cycles_2_ns(this_offset);
-}
-
-/* We need to define a real function for sched_clock, to override the
-   weak default version */
-#ifdef CONFIG_PARAVIRT
-unsigned long long sched_clock(void)
-{
-	return paravirt_sched_clock();
-}
-#else
-unsigned long long sched_clock(void)
-	__attribute__((alias("native_sched_clock")));
-#endif
-
-unsigned long native_calculate_cpu_khz(void)
-{
-	unsigned long long start, end;
-	unsigned long count;
-	u64 delta64 = (u64)ULLONG_MAX;
-	int i;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	/* run 3 times to ensure the cache is warm and to get an accurate reading */
-	for (i = 0; i < 3; i++) {
-		mach_prepare_counter();
-		rdtscll(start);
-		mach_countup(&count);
-		rdtscll(end);
-
-		/*
-		 * Error: ECTCNEVERSET
-		 * The CTC wasn't reliable: we got a hit on the very first read,
-		 * or the CPU was so fast/slow that the quotient wouldn't fit in
-		 * 32 bits..
-		 */
-		if (count <= 1)
-			continue;
-
-		/* cpu freq too slow: */
-		if ((end - start) <= CALIBRATE_TIME_MSEC)
-			continue;
-
-		/*
-		 * We want the minimum time of all runs in case one of them
-		 * is inaccurate due to SMI or other delay
-		 */
-		delta64 = min(delta64, (end - start));
-	}
-
-	/* cpu freq too fast (or every run was bad): */
-	if (delta64 > (1ULL<<32))
-		goto err;
-
-	delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */
-	do_div(delta64,CALIBRATE_TIME_MSEC);
-
-	local_irq_restore(flags);
-	return (unsigned long)delta64;
-err:
-	local_irq_restore(flags);
-	return 0;
-}
-
-int recalibrate_cpu_khz(void)
-{
-#ifndef CONFIG_SMP
-	unsigned long cpu_khz_old = cpu_khz;
-
-	if (cpu_has_tsc) {
-		cpu_khz = calculate_cpu_khz();
-		tsc_khz = cpu_khz;
-		cpu_data(0).loops_per_jiffy =
-			cpufreq_scale(cpu_data(0).loops_per_jiffy,
-					cpu_khz_old, cpu_khz);
-		return 0;
-	} else
-		return -ENODEV;
-#else
-	return -ENODEV;
-#endif
-}
-
-EXPORT_SYMBOL(recalibrate_cpu_khz);
-
-#ifdef CONFIG_CPU_FREQ
-
-/*
- * if the CPU frequency is scaled, TSC-based delays will need a different
- * loops_per_jiffy value to function properly.
- */
-static unsigned int ref_freq;
-static unsigned long loops_per_jiffy_ref;
-static unsigned long cpu_khz_ref;
-
-static int
-time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
-{
-	struct cpufreq_freqs *freq = data;
-
-	if (!ref_freq) {
-		if (!freq->old){
-			ref_freq = freq->new;
-			return 0;
-		}
-		ref_freq = freq->old;
-		loops_per_jiffy_ref = cpu_data(freq->cpu).loops_per_jiffy;
-		cpu_khz_ref = cpu_khz;
-	}
-
-	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
-	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
-	    (val == CPUFREQ_RESUMECHANGE)) {
-		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-			cpu_data(freq->cpu).loops_per_jiffy =
-				cpufreq_scale(loops_per_jiffy_ref,
-						ref_freq, freq->new);
-
-		if (cpu_khz) {
-
-			if (num_online_cpus() == 1)
-				cpu_khz = cpufreq_scale(cpu_khz_ref,
-						ref_freq, freq->new);
-			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
-				tsc_khz = cpu_khz;
-				set_cyc2ns_scale(cpu_khz, freq->cpu);
-				/*
-				 * TSC based sched_clock turns
-				 * to junk w/ cpufreq
-				 */
-				mark_tsc_unstable("cpufreq changes");
-			}
-		}
-	}
-
-	return 0;
-}
-
-static struct notifier_block time_cpufreq_notifier_block = {
-	.notifier_call	= time_cpufreq_notifier
-};
-
-static int __init cpufreq_tsc(void)
-{
-	return cpufreq_register_notifier(&time_cpufreq_notifier_block,
-					 CPUFREQ_TRANSITION_NOTIFIER);
-}
-core_initcall(cpufreq_tsc);
-
-#endif
-
-/* clock source code */
-
-static unsigned long current_tsc_khz;
-static struct clocksource clocksource_tsc;
-
-/*
- * We compare the TSC to the cycle_last value in the clocksource
- * structure to avoid a nasty time-warp issue. This can be observed in
- * a very small window right after one CPU updated cycle_last under
- * xtime lock and the other CPU reads a TSC value which is smaller
- * than the cycle_last reference value due to a TSC which is slighty
- * behind. This delta is nowhere else observable, but in that case it
- * results in a forward time jump in the range of hours due to the
- * unsigned delta calculation of the time keeping core code, which is
- * necessary to support wrapping clocksources like pm timer.
- */
-static cycle_t read_tsc(void)
-{
-	cycle_t ret;
-
-	rdtscll(ret);
-
-	return ret >= clocksource_tsc.cycle_last ?
-		ret : clocksource_tsc.cycle_last;
-}
-
-static struct clocksource clocksource_tsc = {
-	.name			= "tsc",
-	.rating			= 300,
-	.read			= read_tsc,
-	.mask			= CLOCKSOURCE_MASK(64),
-	.mult			= 0, /* to be set */
-	.shift			= 22,
-	.flags			= CLOCK_SOURCE_IS_CONTINUOUS |
-				  CLOCK_SOURCE_MUST_VERIFY,
-};
-
-void mark_tsc_unstable(char *reason)
-{
-	if (!tsc_unstable) {
-		tsc_unstable = 1;
-		printk("Marking TSC unstable due to: %s.\n", reason);
-		/* Can be called before registration */
-		if (clocksource_tsc.mult)
-			clocksource_change_rating(&clocksource_tsc, 0);
-		else
-			clocksource_tsc.rating = 0;
-	}
-}
-EXPORT_SYMBOL_GPL(mark_tsc_unstable);
-
-static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
-{
-	printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
-	       d->ident);
-	tsc_unstable = 1;
-	return 0;
-}
-
-/* List of systems that have known TSC problems */
-static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
-	{
-	 .callback = dmi_mark_tsc_unstable,
-	 .ident = "IBM Thinkpad 380XD",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
-		     },
-	 },
-	 {}
-};
-
-/*
- * Make an educated guess if the TSC is trustworthy and synchronized
- * over all CPUs.
- */
-__cpuinit int unsynchronized_tsc(void)
-{
-	if (!cpu_has_tsc || tsc_unstable)
-		return 1;
-
-	/* Anything with constant TSC should be synchronized */
-	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
-		return 0;
-
-	/*
-	 * Intel systems are normally all synchronized.
-	 * Exceptions must mark TSC as unstable:
-	 */
-	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
-		/* assume multi socket systems are not synchronized: */
-		if (num_possible_cpus() > 1)
-			tsc_unstable = 1;
-	}
-	return tsc_unstable;
-}
-
-/*
- * Geode_LX - the OLPC CPU has a possibly a very reliable TSC
- */
-#ifdef CONFIG_MGEODE_LX
-/* RTSC counts during suspend */
-#define RTSC_SUSP 0x100
-
-static void __init check_geode_tsc_reliable(void)
-{
-	unsigned long res_low, res_high;
-
-	rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
-	if (res_low & RTSC_SUSP)
-		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
-}
-#else
-static inline void check_geode_tsc_reliable(void) { }
-#endif
-
-
-void __init tsc_init(void)
-{
-	int cpu;
-
-	if (!cpu_has_tsc || tsc_disabled > 0)
-		return;
-
-	cpu_khz = calculate_cpu_khz();
-	tsc_khz = cpu_khz;
-
-	if (!cpu_khz) {
-		mark_tsc_unstable("could not calculate TSC khz");
-		return;
-	}
-
-	/* now allow native_sched_clock() to use rdtsc */
-	tsc_disabled = 0;
-
-	printk("Detected %lu.%03lu MHz processor.\n",
-				(unsigned long)cpu_khz / 1000,
-				(unsigned long)cpu_khz % 1000);
-
-	/*
-	 * Secondary CPUs do not run through tsc_init(), so set up
-	 * all the scale factors for all CPUs, assuming the same
-	 * speed as the bootup CPU. (cpufreq notifiers will fix this
-	 * up if their speed diverges)
-	 */
-	for_each_possible_cpu(cpu)
-		set_cyc2ns_scale(cpu_khz, cpu);
-
-	use_tsc_delay();
-
-	/* Check and install the TSC clocksource */
-	dmi_check_system(bad_tsc_dmi_table);
-
-	unsynchronized_tsc();
-	check_geode_tsc_reliable();
-	current_tsc_khz = tsc_khz;
-	clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
-							clocksource_tsc.shift);
-	/* lower the rating if we already know its unstable: */
-	if (check_tsc_unstable()) {
-		clocksource_tsc.rating = 0;
-		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
-	}
-	clocksource_register(&clocksource_tsc);
-}
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
deleted file mode 100644
index 1784b8077a12..000000000000
--- a/arch/x86/kernel/tsc_64.c
+++ /dev/null
@@ -1,357 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/clocksource.h>
-#include <linux/time.h>
-#include <linux/acpi.h>
-#include <linux/cpufreq.h>
-#include <linux/acpi_pmtmr.h>
-
-#include <asm/hpet.h>
-#include <asm/timex.h>
-#include <asm/timer.h>
-#include <asm/vgtod.h>
-
-static int notsc __initdata = 0;
-
-unsigned int cpu_khz;		/* TSC clocks / usec, not used here */
-EXPORT_SYMBOL(cpu_khz);
-unsigned int tsc_khz;
-EXPORT_SYMBOL(tsc_khz);
-
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz) / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better precision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@polymtl.ca)
- *
- *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-DEFINE_PER_CPU(unsigned long, cyc2ns);
-
-static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
-{
-	unsigned long long tsc_now, ns_now;
-	unsigned long flags, *scale;
-
-	local_irq_save(flags);
-	sched_clock_idle_sleep_event();
-
-	scale = &per_cpu(cyc2ns, cpu);
-
-	rdtscll(tsc_now);
-	ns_now = __cycles_2_ns(tsc_now);
-
-	if (cpu_khz)
-		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
-
-	sched_clock_idle_wakeup_event(0);
-	local_irq_restore(flags);
-}
-
-unsigned long long native_sched_clock(void)
-{
-	unsigned long a = 0;
-
-	/* Could do CPU core sync here. Opteron can execute rdtsc speculatively,
-	 * which means it is not completely exact and may not be monotonous
-	 * between CPUs. But the errors should be too small to matter for
-	 * scheduling purposes.
-	 */
-
-	rdtscll(a);
-	return cycles_2_ns(a);
-}
-
-/* We need to define a real function for sched_clock, to override the
-   weak default version */
-#ifdef CONFIG_PARAVIRT
-unsigned long long sched_clock(void)
-{
-	return paravirt_sched_clock();
-}
-#else
-unsigned long long
-sched_clock(void) __attribute__((alias("native_sched_clock")));
-#endif
-
-
-static int tsc_unstable;
-
-int check_tsc_unstable(void)
-{
-	return tsc_unstable;
-}
-EXPORT_SYMBOL_GPL(check_tsc_unstable);
-
-#ifdef CONFIG_CPU_FREQ
-
-/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency
- * changes.
- *
- * RED-PEN: On SMP we assume all CPUs run with the same frequency.  It's
- * not that important because current Opteron setups do not support
- * scaling on SMP anyroads.
- *
- * Should fix up last_tsc too. Currently gettimeofday in the
- * first tick after the change will be slightly wrong.
- */
-
-static unsigned int  ref_freq;
-static unsigned long loops_per_jiffy_ref;
-static unsigned long tsc_khz_ref;
-
-static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
-				 void *data)
-{
-	struct cpufreq_freqs *freq = data;
-	unsigned long *lpj, dummy;
-
-	if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC))
-		return 0;
-
-	lpj = &dummy;
-	if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-#ifdef CONFIG_SMP
-		lpj = &cpu_data(freq->cpu).loops_per_jiffy;
-#else
-		lpj = &boot_cpu_data.loops_per_jiffy;
-#endif
-
-	if (!ref_freq) {
-		ref_freq = freq->old;
-		loops_per_jiffy_ref = *lpj;
-		tsc_khz_ref = tsc_khz;
-	}
-	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
-		(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
-		(val == CPUFREQ_RESUMECHANGE)) {
-		*lpj =
-		cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
-
-		tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
-		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-			mark_tsc_unstable("cpufreq changes");
-	}
-
-	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
-
-	return 0;
-}
-
-static struct notifier_block time_cpufreq_notifier_block = {
-	.notifier_call  = time_cpufreq_notifier
-};
-
-static int __init cpufreq_tsc(void)
-{
-	cpufreq_register_notifier(&time_cpufreq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-	return 0;
-}
-
-core_initcall(cpufreq_tsc);
-
-#endif
-
-#define MAX_RETRIES	5
-#define SMI_TRESHOLD	50000
-
-/*
- * Read TSC and the reference counters. Take care of SMI disturbance
- */
-static unsigned long __init tsc_read_refs(unsigned long *pm,
-					  unsigned long *hpet)
-{
-	unsigned long t1, t2;
-	int i;
-
-	for (i = 0; i < MAX_RETRIES; i++) {
-		t1 = get_cycles();
-		if (hpet)
-			*hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
-		else
-			*pm = acpi_pm_read_early();
-		t2 = get_cycles();
-		if ((t2 - t1) < SMI_TRESHOLD)
-			return t2;
-	}
-	return ULONG_MAX;
-}
-
-/**
- * tsc_calibrate - calibrate the tsc on boot
- */
-void __init tsc_calibrate(void)
-{
-	unsigned long flags, tsc1, tsc2, tr1, tr2, pm1, pm2, hpet1, hpet2;
-	int hpet = is_hpet_enabled(), cpu;
-
-	local_irq_save(flags);
-
-	tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
-
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	outb(0xb0, 0x43);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-	tr1 = get_cycles();
-	while ((inb(0x61) & 0x20) == 0);
-	tr2 = get_cycles();
-
-	tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
-
-	local_irq_restore(flags);
-
-	/*
-	 * Preset the result with the raw and inaccurate PIT
-	 * calibration value
-	 */
-	tsc_khz = (tr2 - tr1) / 50;
-
-	/* hpet or pmtimer available ? */
-	if (!hpet && !pm1 && !pm2) {
-		printk(KERN_INFO "TSC calibrated against PIT\n");
-		goto out;
-	}
-
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) {
-		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
-		       "using PIT calibration result\n");
-		goto out;
-	}
-
-	tsc2 = (tsc2 - tsc1) * 1000000L;
-
-	if (hpet) {
-		printk(KERN_INFO "TSC calibrated against HPET\n");
-		if (hpet2 < hpet1)
-			hpet2 += 0x100000000;
-		hpet2 -= hpet1;
-		tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000;
-	} else {
-		printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
-		if (pm2 < pm1)
-			pm2 += ACPI_PM_OVRRUN;
-		pm2 -= pm1;
-		tsc1 = (pm2 * 1000000000) / PMTMR_TICKS_PER_SEC;
-	}
-
-	tsc_khz = tsc2 / tsc1;
-
-out:
-	for_each_possible_cpu(cpu)
-		set_cyc2ns_scale(tsc_khz, cpu);
-}
-
-/*
- * Make an educated guess if the TSC is trustworthy and synchronized
- * over all CPUs.
- */
-__cpuinit int unsynchronized_tsc(void)
-{
-	if (tsc_unstable)
-		return 1;
-
-#ifdef CONFIG_SMP
-	if (apic_is_clustered_box())
-		return 1;
-#endif
-
-	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
-		return 0;
-
-	/* Assume multi socket systems are not synchronized */
-	return num_present_cpus() > 1;
-}
-
-int __init notsc_setup(char *s)
-{
-	notsc = 1;
-	return 1;
-}
-
-__setup("notsc", notsc_setup);
-
-static struct clocksource clocksource_tsc;
-
-/*
- * We compare the TSC to the cycle_last value in the clocksource
- * structure to avoid a nasty time-warp. This can be observed in a
- * very small window right after one CPU updated cycle_last under
- * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which
- * is smaller than the cycle_last reference value due to a TSC which
- * is slighty behind. This delta is nowhere else observable, but in
- * that case it results in a forward time jump in the range of hours
- * due to the unsigned delta calculation of the time keeping core
- * code, which is necessary to support wrapping clocksources like pm
- * timer.
- */
-static cycle_t read_tsc(void)
-{
-	cycle_t ret = (cycle_t)get_cycles();
-
-	return ret >= clocksource_tsc.cycle_last ?
-		ret : clocksource_tsc.cycle_last;
-}
-
-static cycle_t __vsyscall_fn vread_tsc(void)
-{
-	cycle_t ret = (cycle_t)vget_cycles();
-
-	return ret >= __vsyscall_gtod_data.clock.cycle_last ?
-		ret : __vsyscall_gtod_data.clock.cycle_last;
-}
-
-static struct clocksource clocksource_tsc = {
-	.name			= "tsc",
-	.rating			= 300,
-	.read			= read_tsc,
-	.mask			= CLOCKSOURCE_MASK(64),
-	.shift			= 22,
-	.flags			= CLOCK_SOURCE_IS_CONTINUOUS |
-				  CLOCK_SOURCE_MUST_VERIFY,
-	.vread			= vread_tsc,
-};
-
-void mark_tsc_unstable(char *reason)
-{
-	if (!tsc_unstable) {
-		tsc_unstable = 1;
-		printk("Marking TSC unstable due to %s\n", reason);
-		/* Change only the rating, when not registered */
-		if (clocksource_tsc.mult)
-			clocksource_change_rating(&clocksource_tsc, 0);
-		else
-			clocksource_tsc.rating = 0;
-	}
-}
-EXPORT_SYMBOL_GPL(mark_tsc_unstable);
-
-void __init init_tsc_clocksource(void)
-{
-	if (!notsc) {
-		clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
-							clocksource_tsc.shift);
-		if (check_tsc_unstable())
-			clocksource_tsc.rating = 0;
-
-		clocksource_register(&clocksource_tsc);
-	}
-}
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
new file mode 100644
index 000000000000..41e01b145c48
--- /dev/null
+++ b/arch/x86/kernel/visws_quirks.c
@@ -0,0 +1,707 @@
+/*
+ *  SGI Visual Workstation support and quirks, unmaintained.
+ *
+ *  Split out from setup.c by davej@suse.de
+ *
+ *	Copyright (C) 1999 Bent Hagemark, Ingo Molnar
+ *
+ *  SGI Visual Workstation interrupt controller
+ *
+ *  The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
+ *  which serves as the main interrupt controller in the system.  Non-legacy
+ *  hardware in the system uses this controller directly.  Legacy devices
+ *  are connected to the PIIX4 which in turn has its 8259(s) connected to
+ *  a of the Cobalt APIC entry.
+ *
+ *  09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
+ *
+ *  25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/visws/cobalt.h>
+#include <asm/visws/piix4.h>
+#include <asm/arch_hooks.h>
+#include <asm/fixmap.h>
+#include <asm/reboot.h>
+#include <asm/setup.h>
+#include <asm/e820.h>
+#include <asm/smp.h>
+#include <asm/io.h>
+
+#include <mach_ipi.h>
+
+#include "mach_apic.h"
+
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <linux/kernel_stat.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+#include <asm/irq_vectors.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
+#include <asm/visws/piix4.h>
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+extern int no_broadcast;
+
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
+
+char visws_board_type	= -1;
+char visws_board_rev	= -1;
+
+int is_visws_box(void)
+{
+	return visws_board_type >= 0;
+}
+
+static int __init visws_time_init(void)
+{
+	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
+
+	/* Set the countdown value */
+	co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
+
+	/* Start the timer */
+	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
+
+	/* Enable (unmask) the timer interrupt */
+	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
+
+	/*
+	 * Zero return means the generic timer setup code will set up
+	 * the standard vector:
+	 */
+	return 0;
+}
+
+static int __init visws_pre_intr_init(void)
+{
+	init_VISWS_APIC_irqs();
+
+	/*
+	 * We dont want ISA irqs to be set up by the generic code:
+	 */
+	return 1;
+}
+
+/* Quirk for machine specific memory setup. */
+
+#define MB (1024 * 1024)
+
+unsigned long sgivwfb_mem_phys;
+unsigned long sgivwfb_mem_size;
+EXPORT_SYMBOL(sgivwfb_mem_phys);
+EXPORT_SYMBOL(sgivwfb_mem_size);
+
+long long mem_size __initdata = 0;
+
+static char * __init visws_memory_setup(void)
+{
+	long long gfx_mem_size = 8 * MB;
+
+	mem_size = boot_params.alt_mem_k;
+
+	if (!mem_size) {
+		printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
+		mem_size = 128 * MB;
+	}
+
+	/*
+	 * this hardcodes the graphics memory to 8 MB
+	 * it really should be sized dynamically (or at least
+	 * set as a boot param)
+	 */
+	if (!sgivwfb_mem_size) {
+		printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
+		sgivwfb_mem_size = 8 * MB;
+	}
+
+	/*
+	 * Trim to nearest MB
+	 */
+	sgivwfb_mem_size &= ~((1 << 20) - 1);
+	sgivwfb_mem_phys = mem_size - gfx_mem_size;
+
+	e820_add_region(0, LOWMEMSIZE(), E820_RAM);
+	e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
+	e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
+
+	return "PROM";
+}
+
+static void visws_machine_emergency_restart(void)
+{
+	/*
+	 * Visual Workstations restart after this
+	 * register is poked on the PIIX4
+	 */
+	outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
+}
+
+static void visws_machine_power_off(void)
+{
+	unsigned short pm_status;
+/*	extern unsigned int pci_bus0; */
+
+	while ((pm_status = inw(PMSTS_PORT)) & 0x100)
+		outw(pm_status, PMSTS_PORT);
+
+	outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
+
+	mdelay(10);
+
+#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
+	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
+
+/*	outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
+	outl(PIIX_SPECIAL_STOP, 0xCFC);
+}
+
+static int __init visws_get_smp_config(unsigned int early)
+{
+	/*
+	 * Prevent MP-table parsing by the generic code:
+	 */
+	return 1;
+}
+
+extern unsigned int __cpuinitdata maxcpus;
+
+/*
+ * The Visual Workstation is Intel MP compliant in the hardware
+ * sense, but it doesn't have a BIOS(-configuration table).
+ * No problem for Linux.
+ */
+
+static void __init MP_processor_info(struct mpc_config_processor *m)
+{
+	int ver, logical_apicid;
+	physid_mask_t apic_cpus;
+
+	if (!(m->mpc_cpuflag & CPU_ENABLED))
+		return;
+
+	logical_apicid = m->mpc_apicid;
+	printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
+	       m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
+	       m->mpc_apicid,
+	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	       m->mpc_apicver);
+
+	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
+		boot_cpu_physical_apicid = m->mpc_apicid;
+
+	ver = m->mpc_apicver;
+	if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {
+		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
+			m->mpc_apicid, MAX_APICS);
+		return;
+	}
+
+	apic_cpus = apicid_to_cpu_present(m->mpc_apicid);
+	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
+	/*
+	 * Validate version
+	 */
+	if (ver == 0x0) {
+		printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
+			"fixing up to 0x10. (tell your hw vendor)\n",
+			m->mpc_apicid);
+		ver = 0x10;
+	}
+	apic_version[m->mpc_apicid] = ver;
+}
+
+static int __init visws_find_smp_config(unsigned int reserve)
+{
+	struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
+	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
+
+	if (ncpus > CO_CPU_MAX) {
+		printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
+			ncpus, mp);
+
+		ncpus = CO_CPU_MAX;
+	}
+
+	if (ncpus > maxcpus)
+		ncpus = maxcpus;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	smp_found_config = 1;
+#endif
+	while (ncpus--)
+		MP_processor_info(mp++);
+
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	return 1;
+}
+
+static int visws_trap_init(void);
+
+static struct x86_quirks visws_x86_quirks __initdata = {
+	.arch_time_init		= visws_time_init,
+	.arch_pre_intr_init	= visws_pre_intr_init,
+	.arch_memory_setup	= visws_memory_setup,
+	.arch_intr_init		= NULL,
+	.arch_trap_init		= visws_trap_init,
+	.mach_get_smp_config	= visws_get_smp_config,
+	.mach_find_smp_config	= visws_find_smp_config,
+};
+
+void __init visws_early_detect(void)
+{
+	int raw;
+
+	visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
+							 >> PIIX_GPI_BD_SHIFT;
+
+	if (visws_board_type < 0)
+		return;
+
+	/*
+	 * Install special quirks for timer, interrupt and memory setup:
+	 * Fall back to generic behavior for traps:
+	 * Override generic MP-table parsing:
+	 */
+	x86_quirks = &visws_x86_quirks;
+
+	/*
+	 * Install reboot quirks:
+	 */
+	pm_power_off			= visws_machine_power_off;
+	machine_ops.emergency_restart	= visws_machine_emergency_restart;
+
+	/*
+	 * Do not use broadcast IPIs:
+	 */
+	no_broadcast = 0;
+
+#ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Turn off IO-APIC detection and initialization:
+	 */
+	skip_ioapic_setup		= 1;
+#endif
+
+	/*
+	 * Get Board rev.
+	 * First, we have to initialize the 307 part to allow us access
+	 * to the GPIO registers.  Let's map them at 0x0fc0 which is right
+	 * after the PIIX4 PM section.
+	 */
+	outb_p(SIO_DEV_SEL, SIO_INDEX);
+	outb_p(SIO_GP_DEV, SIO_DATA);	/* Talk to GPIO regs. */
+
+	outb_p(SIO_DEV_MSB, SIO_INDEX);
+	outb_p(SIO_GP_MSB, SIO_DATA);	/* MSB of GPIO base address */
+
+	outb_p(SIO_DEV_LSB, SIO_INDEX);
+	outb_p(SIO_GP_LSB, SIO_DATA);	/* LSB of GPIO base address */
+
+	outb_p(SIO_DEV_ENB, SIO_INDEX);
+	outb_p(1, SIO_DATA);		/* Enable GPIO registers. */
+
+	/*
+	 * Now, we have to map the power management section to write
+	 * a bit which enables access to the GPIO registers.
+	 * What lunatic came up with this shit?
+	 */
+	outb_p(SIO_DEV_SEL, SIO_INDEX);
+	outb_p(SIO_PM_DEV, SIO_DATA);	/* Talk to GPIO regs. */
+
+	outb_p(SIO_DEV_MSB, SIO_INDEX);
+	outb_p(SIO_PM_MSB, SIO_DATA);	/* MSB of PM base address */
+
+	outb_p(SIO_DEV_LSB, SIO_INDEX);
+	outb_p(SIO_PM_LSB, SIO_DATA);	/* LSB of PM base address */
+
+	outb_p(SIO_DEV_ENB, SIO_INDEX);
+	outb_p(1, SIO_DATA);		/* Enable PM registers. */
+
+	/*
+	 * Now, write the PM register which enables the GPIO registers.
+	 */
+	outb_p(SIO_PM_FER2, SIO_PM_INDEX);
+	outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
+
+	/*
+	 * Now, initialize the GPIO registers.
+	 * We want them all to be inputs which is the
+	 * power on default, so let's leave them alone.
+	 * So, let's just read the board rev!
+	 */
+	raw = inb_p(SIO_GP_DATA1);
+	raw &= 0x7f;	/* 7 bits of valid board revision ID. */
+
+	if (visws_board_type == VISWS_320) {
+		if (raw < 0x6) {
+			visws_board_rev = 4;
+		} else if (raw < 0xc) {
+			visws_board_rev = 5;
+		} else {
+			visws_board_rev = 6;
+		}
+	} else if (visws_board_type == VISWS_540) {
+			visws_board_rev = 2;
+		} else {
+			visws_board_rev = raw;
+		}
+
+	printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
+	       (visws_board_type == VISWS_320 ? "320" :
+	       (visws_board_type == VISWS_540 ? "540" :
+		"unknown")), visws_board_rev);
+}
+
+#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
+#define BCD (LI_INTB | LI_INTC | LI_INTD)
+#define ALLDEVS (A01234 | BCD)
+
+static __init void lithium_init(void)
+{
+	set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
+	set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
+
+	if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+	    (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
+/*		panic("This machine is not SGI Visual Workstation 320/540"); */
+	}
+
+	if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+	    (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
+/*		panic("This machine is not SGI Visual Workstation 320/540"); */
+	}
+
+	li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
+	li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
+}
+
+static __init void cobalt_init(void)
+{
+	/*
+	 * On normal SMP PC this is used only with SMP, but we have to
+	 * use it and set it up here to start the Cobalt clock
+	 */
+	set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
+	setup_local_APIC();
+	printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
+		(unsigned int)apic_read(APIC_LVR),
+		(unsigned int)apic_read(APIC_ID));
+
+	set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
+	set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
+	printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
+		co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
+
+	/* Enable Cobalt APIC being careful to NOT change the ID! */
+	co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
+
+	printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
+		co_apic_read(CO_APIC_ID));
+}
+
+static int __init visws_trap_init(void)
+{
+	lithium_init();
+	cobalt_init();
+
+	return 1;
+}
+
+/*
+ * IRQ controller / APIC support:
+ */
+
+static DEFINE_SPINLOCK(cobalt_lock);
+
+/*
+ * Set the given Cobalt APIC Redirection Table entry to point
+ * to the given IDT vector/index.
+ */
+static inline void co_apic_set(int entry, int irq)
+{
+	co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
+	co_apic_write(CO_APIC_HI(entry), 0);
+}
+
+/*
+ * Cobalt (IO)-APIC functions to handle PCI devices.
+ */
+static inline int co_apic_ide0_hack(void)
+{
+	extern char visws_board_type;
+	extern char visws_board_rev;
+
+	if (visws_board_type == VISWS_320 && visws_board_rev == 5)
+		return 5;
+	return CO_APIC_IDE0;
+}
+
+static int is_co_apic(unsigned int irq)
+{
+	if (IS_CO_APIC(irq))
+		return CO_APIC(irq);
+
+	switch (irq) {
+		case 0: return CO_APIC_CPU;
+		case CO_IRQ_IDE0: return co_apic_ide0_hack();
+		case CO_IRQ_IDE1: return CO_APIC_IDE1;
+		default: return -1;
+	}
+}
+
+
+/*
+ * This is the SGI Cobalt (IO-)APIC:
+ */
+
+static void enable_cobalt_irq(unsigned int irq)
+{
+	co_apic_set(is_co_apic(irq), irq);
+}
+
+static void disable_cobalt_irq(unsigned int irq)
+{
+	int entry = is_co_apic(irq);
+
+	co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
+	co_apic_read(CO_APIC_LO(entry));
+}
+
+/*
+ * "irq" really just serves to identify the device.  Here is where we
+ * map this to the Cobalt APIC entry where it's physically wired.
+ * This is called via request_irq -> setup_irq -> irq_desc->startup()
+ */
+static unsigned int startup_cobalt_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
+		irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
+	enable_cobalt_irq(irq);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+	return 0;
+}
+
+static void ack_cobalt_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	disable_cobalt_irq(irq);
+	apic_write(APIC_EOI, APIC_EIO_ACK);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static void end_cobalt_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_cobalt_irq(irq);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip cobalt_irq_type = {
+	.typename =	"Cobalt-APIC",
+	.startup =	startup_cobalt_irq,
+	.shutdown =	disable_cobalt_irq,
+	.enable =	enable_cobalt_irq,
+	.disable =	disable_cobalt_irq,
+	.ack =		ack_cobalt_irq,
+	.end =		end_cobalt_irq,
+};
+
+
+/*
+ * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
+ * -- not the manner expected by the code in i8259.c.
+ *
+ * there is a 'master' physical interrupt source that gets sent to
+ * the CPU. But in the chipset there are various 'virtual' interrupts
+ * waiting to be handled. We represent this to Linux through a 'master'
+ * interrupt controller type, and through a special virtual interrupt-
+ * controller. Device drivers only see the virtual interrupt sources.
+ */
+static unsigned int startup_piix4_master_irq(unsigned int irq)
+{
+	init_8259A(0);
+
+	return startup_cobalt_irq(irq);
+}
+
+static void end_piix4_master_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	enable_cobalt_irq(irq);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip piix4_master_irq_type = {
+	.typename =	"PIIX4-master",
+	.startup =	startup_piix4_master_irq,
+	.ack =		ack_cobalt_irq,
+	.end =		end_piix4_master_irq,
+};
+
+
+static struct irq_chip piix4_virtual_irq_type = {
+	.typename =	"PIIX4-virtual",
+	.shutdown =	disable_8259A_irq,
+	.enable =	enable_8259A_irq,
+	.disable =	disable_8259A_irq,
+};
+
+
+/*
+ * PIIX4-8259 master/virtual functions to handle interrupt requests
+ * from legacy devices: floppy, parallel, serial, rtc.
+ *
+ * None of these get Cobalt APIC entries, neither do they have IDT
+ * entries. These interrupts are purely virtual and distributed from
+ * the 'master' interrupt source: CO_IRQ_8259.
+ *
+ * When the 8259 interrupts its handler figures out which of these
+ * devices is interrupting and dispatches to its handler.
+ *
+ * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
+ * enable_irq gets the right irq. This 'master' irq is never directly
+ * manipulated by any driver.
+ */
+static irqreturn_t piix4_master_intr(int irq, void *dev_id)
+{
+	int realirq;
+	irq_desc_t *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	/* Find out what's interrupting in the PIIX4 master 8259 */
+	outb(0x0c, 0x20);		/* OCW3 Poll command */
+	realirq = inb(0x20);
+
+	/*
+	 * Bit 7 == 0 means invalid/spurious
+	 */
+	if (unlikely(!(realirq & 0x80)))
+		goto out_unlock;
+
+	realirq &= 7;
+
+	if (unlikely(realirq == 2)) {
+		outb(0x0c, 0xa0);
+		realirq = inb(0xa0);
+
+		if (unlikely(!(realirq & 0x80)))
+			goto out_unlock;
+
+		realirq = (realirq & 7) + 8;
+	}
+
+	/* mask and ack interrupt */
+	cached_irq_mask |= 1 << realirq;
+	if (unlikely(realirq > 7)) {
+		inb(0xa1);
+		outb(cached_slave_mask, 0xa1);
+		outb(0x60 + (realirq & 7), 0xa0);
+		outb(0x60 + 2, 0x20);
+	} else {
+		inb(0x21);
+		outb(cached_master_mask, 0x21);
+		outb(0x60 + realirq, 0x20);
+	}
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	desc = irq_desc + realirq;
+
+	/*
+	 * handle this 'virtual interrupt' as a Cobalt one now.
+	 */
+	kstat_cpu(smp_processor_id()).irqs[realirq]++;
+
+	if (likely(desc->action != NULL))
+		handle_IRQ_event(realirq, desc->action);
+
+	if (!(desc->status & IRQ_DISABLED))
+		enable_8259A_irq(realirq);
+
+	return IRQ_HANDLED;
+
+out_unlock:
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+	return IRQ_NONE;
+}
+
+static struct irqaction master_action = {
+	.handler =	piix4_master_intr,
+	.name =		"PIIX4-8259",
+};
+
+static struct irqaction cascade_action = {
+	.handler = 	no_action,
+	.name =		"cascade",
+};
+
+
+void init_VISWS_APIC_irqs(void)
+{
+	int i;
+
+	for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+
+		if (i == 0) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+		else if (i == CO_IRQ_IDE0) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+		else if (i == CO_IRQ_IDE1) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+		else if (i == CO_IRQ_8259) {
+			irq_desc[i].chip = &piix4_master_irq_type;
+		}
+		else if (i < CO_IRQ_APIC0) {
+			irq_desc[i].chip = &piix4_virtual_irq_type;
+		}
+		else if (IS_CO_APIC(i)) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+	}
+
+	setup_irq(CO_IRQ_8259, &master_action);
+	setup_irq(2, &cascade_action);
+}
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 956f38927aa7..0a1b1a9d922d 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -151,7 +151,7 @@ static unsigned vmi_patch(u8 type, u16 clobbers, void *insns,
 					      insns, ip);
 		case PARAVIRT_PATCH(pv_cpu_ops.iret):
 			return patch_internal(VMI_CALL_IRET, len, insns, ip);
-		case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret):
+		case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit):
 			return patch_internal(VMI_CALL_SYSEXIT, len, insns, ip);
 		default:
 			break;
@@ -896,7 +896,7 @@ static inline int __init activate_vmi(void)
 	 * the backend.  They are performance critical anyway, so requiring
 	 * a patch is not a big problem.
 	 */
-	pv_cpu_ops.irq_enable_syscall_ret = (void *)0xfeedbab0;
+	pv_cpu_ops.irq_enable_sysexit = (void *)0xfeedbab0;
 	pv_cpu_ops.iret = (void *)0xbadbab0;
 
 #ifdef CONFIG_SMP
@@ -906,7 +906,6 @@ static inline int __init activate_vmi(void)
 #ifdef CONFIG_X86_LOCAL_APIC
 	para_fill(pv_apic_ops.apic_read, APICRead);
 	para_fill(pv_apic_ops.apic_write, APICWrite);
-	para_fill(pv_apic_ops.apic_write_atomic, APICWrite);
 #endif
 
 	/*
@@ -932,7 +931,7 @@ static inline int __init activate_vmi(void)
 		pv_apic_ops.setup_secondary_clock = vmi_time_ap_init;
 #endif
 		pv_time_ops.sched_clock = vmi_sched_clock;
- 		pv_time_ops.get_cpu_khz = vmi_cpu_khz;
+		pv_time_ops.get_tsc_khz = vmi_tsc_khz;
 
 		/* We have true wallclock functions; disable CMOS clock sync */
 		no_sync_cmos_clock = 1;
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index a2b030780aa9..6953859fe289 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -33,8 +33,7 @@
 #include <asm/apic.h>
 #include <asm/timer.h>
 #include <asm/i8253.h>
-
-#include <irq_vectors.h>
+#include <asm/irq_vectors.h>
 
 #define VMI_ONESHOT  (VMI_ALARM_IS_ONESHOT  | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
 #define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
@@ -70,8 +69,8 @@ unsigned long long vmi_sched_clock(void)
 	return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE));
 }
 
-/* paravirt_ops.get_cpu_khz = vmi_cpu_khz */
-unsigned long vmi_cpu_khz(void)
+/* paravirt_ops.get_tsc_khz = vmi_tsc_khz */
+unsigned long vmi_tsc_khz(void)
 {
 	unsigned long long khz;
 	khz = vmi_timer_ops.get_cycle_frequency();
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index ce5ed083a1e9..cdb2363697d2 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -49,23 +49,14 @@ SECTIONS
   	_etext = .;			/* End of text section */
   } :text = 0x9090
 
+  NOTES :text :note
+
   . = ALIGN(16);		/* Exception table */
   __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
   	__start___ex_table = .;
 	 *(__ex_table)
   	__stop___ex_table = .;
-  }
-
-  NOTES :text :note
-
-  BUG_TABLE :text
-
-  . = ALIGN(4);
-  .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
-  	__tracedata_start = .;
-	*(.tracedata)
-  	__tracedata_end = .;
-  }
+  } :text = 0x9090
 
   RODATA
 
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index fad3674b06a5..63e5c1a22e88 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -19,7 +19,7 @@ PHDRS {
 	data PT_LOAD FLAGS(7);	/* RWE */
 	user PT_LOAD FLAGS(7);	/* RWE */
 	data.init PT_LOAD FLAGS(7);	/* RWE */
-	note PT_NOTE FLAGS(4);	/* R__ */
+	note PT_NOTE FLAGS(0);	/* ___ */
 }
 SECTIONS
 {
@@ -40,26 +40,17 @@ SECTIONS
 	_etext = .;		/* End of text section */
   } :text = 0x9090
 
+  NOTES :text :note
+
   . = ALIGN(16);		/* Exception table */
   __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
   	__start___ex_table = .;
 	 *(__ex_table)
   	__stop___ex_table = .;
-  }
-
-  NOTES :text :note
-
-  BUG_TABLE :text
+  } :text = 0x9090
 
   RODATA
 
-  . = ALIGN(4);
-  .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
-  	__tracedata_start = .;
-	*(.tracedata)
-  	__tracedata_end = .;
-  }
-
   . = ALIGN(PAGE_SIZE);		/* Align data segment to page size boundary */
 				/* Data */
   .data : AT(ADDR(.data) - LOAD_OFFSET) {
@@ -177,6 +168,7 @@ SECTIONS
 	*(.con_initcall.init)
   }
   __con_initcall_end = .;
+  . = ALIGN(16);
   __x86cpuvendor_start = .;
   .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
 	*(.x86cpuvendor.init)
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index ba8c0b75ab0a..0c029e8959c7 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -15,9 +15,12 @@
 #include <linux/init.h>
 #include <linux/pci_ids.h>
 #include <linux/pci_regs.h>
+
+#include <asm/apic.h>
 #include <asm/pci-direct.h>
 #include <asm/io.h>
 #include <asm/paravirt.h>
+#include <asm/setup.h>
 
 #if defined CONFIG_PCI && defined CONFIG_PARAVIRT
 /*
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 61efa2f7d564..0b8b6690a86d 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -42,7 +42,8 @@
 #include <asm/topology.h>
 #include <asm/vgtod.h>
 
-#define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr)))
+#define __vsyscall(nr) \
+		__attribute__ ((unused, __section__(".vsyscall_" #nr))) notrace
 #define __syscall_clobber "r11","cx","memory"
 
 /*
@@ -249,7 +250,7 @@ static ctl_table kernel_root_table2[] = {
    doesn't violate that. We'll find out if it does. */
 static void __cpuinit vsyscall_set_cpu(int cpu)
 {
-	unsigned long *d;
+	unsigned long d;
 	unsigned long node = 0;
 #ifdef CONFIG_NUMA
 	node = cpu_to_node(cpu);
@@ -260,11 +261,11 @@ static void __cpuinit vsyscall_set_cpu(int cpu)
 	/* Store cpu number in limit so that it can be loaded quickly
 	   in user space in vgetcpu.
 	   12 bits for the CPU and 8 bits for the node. */
-	d = (unsigned long *)(get_cpu_gdt_table(cpu) + GDT_ENTRY_PER_CPU);
-	*d = 0x0f40000000000ULL;
-	*d |= cpu;
-	*d |= (node & 0xf) << 12;
-	*d |= (node >> 4) << 48;
+	d = 0x0f40000000000ULL;
+	d |= cpu;
+	d |= (node & 0xf) << 12;
+	d |= (node >> 4) << 48;
+	write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_PER_CPU, &d, DESCTYPE_S);
 }
 
 static void __cpuinit cpu_vsyscall_init(void *arg)
@@ -278,7 +279,7 @@ cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg)
 {
 	long cpu = (long)arg;
 	if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
-		smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 0, 1);
+		smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 1);
 	return NOTIFY_DONE;
 }
 
@@ -301,7 +302,7 @@ static int __init vsyscall_init(void)
 #ifdef CONFIG_SYSCTL
 	register_sysctl_table(kernel_root_table2);
 #endif
-	on_each_cpu(cpu_vsyscall_init, NULL, 0, 1);
+	on_each_cpu(cpu_vsyscall_init, NULL, 1);
 	hotcpu_notifier(cpu_vsyscall_notifier, 0);
 	return 0;
 }
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index f6c05d0410fb..b545f371b5f5 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -2,13 +2,20 @@
    All C exports should go in the respective C files. */
 
 #include <linux/module.h>
-#include <net/checksum.h>
 #include <linux/smp.h>
 
+#include <net/checksum.h>
+
 #include <asm/processor.h>
-#include <asm/uaccess.h>
 #include <asm/pgtable.h>
+#include <asm/uaccess.h>
 #include <asm/desc.h>
+#include <asm/ftrace.h>
+
+#ifdef CONFIG_FTRACE
+/* mcount is defined in assembly */
+EXPORT_SYMBOL(mcount);
+#endif
 
 EXPORT_SYMBOL(kernel_thread);
 
@@ -53,8 +60,3 @@ EXPORT_SYMBOL(init_level4_pgt);
 EXPORT_SYMBOL(load_gs_index);
 
 EXPORT_SYMBOL(_proxy_pda);
-
-#ifdef CONFIG_PARAVIRT
-/* Virtualized guests may want to use it */
-EXPORT_SYMBOL_GPL(cpu_gdt_descr);
-#endif
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index c97d35c218db..d0e940bb6f40 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -2,7 +2,8 @@
 # Makefile for Kernel-based Virtual Machine module
 #
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+                coalesced_mmio.o)
 ifeq ($(CONFIG_KVM_TRACE),y)
 common-objs += $(addprefix ../../../virt/kvm/, kvm_trace.o)
 endif
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 3829aa7b663f..c0f7872a9124 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -91,7 +91,7 @@ static void pit_set_gate(struct kvm *kvm, int channel, u32 val)
 	c->gate = val;
 }
 
-int pit_get_gate(struct kvm *kvm, int channel)
+static int pit_get_gate(struct kvm *kvm, int channel)
 {
 	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
 
@@ -193,19 +193,16 @@ static void pit_latch_status(struct kvm *kvm, int channel)
 	}
 }
 
-int __pit_timer_fn(struct kvm_kpit_state *ps)
+static int __pit_timer_fn(struct kvm_kpit_state *ps)
 {
 	struct kvm_vcpu *vcpu0 = ps->pit->kvm->vcpus[0];
 	struct kvm_kpit_timer *pt = &ps->pit_timer;
 
-	atomic_inc(&pt->pending);
-	smp_mb__after_atomic_inc();
-	if (vcpu0) {
+	if (!atomic_inc_and_test(&pt->pending))
 		set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
-		if (waitqueue_active(&vcpu0->wq)) {
-			vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
-			wake_up_interruptible(&vcpu0->wq);
-		}
+	if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
+		vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+		wake_up_interruptible(&vcpu0->wq);
 	}
 
 	pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
@@ -308,6 +305,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 		create_pit_timer(&ps->pit_timer, val, 0);
 		break;
 	case 2:
+	case 3:
 		create_pit_timer(&ps->pit_timer, val, 1);
 		break;
 	default:
@@ -459,7 +457,8 @@ static void pit_ioport_read(struct kvm_io_device *this,
 	mutex_unlock(&pit_state->lock);
 }
 
-static int pit_in_range(struct kvm_io_device *this, gpa_t addr)
+static int pit_in_range(struct kvm_io_device *this, gpa_t addr,
+			int len, int is_write)
 {
 	return ((addr >= KVM_PIT_BASE_ADDRESS) &&
 		(addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
@@ -500,7 +499,8 @@ static void speaker_ioport_read(struct kvm_io_device *this,
 	mutex_unlock(&pit_state->lock);
 }
 
-static int speaker_in_range(struct kvm_io_device *this, gpa_t addr)
+static int speaker_in_range(struct kvm_io_device *this, gpa_t addr,
+			    int len, int is_write)
 {
 	return (addr == KVM_SPEAKER_BASE_ADDRESS);
 }
@@ -575,7 +575,7 @@ void kvm_free_pit(struct kvm *kvm)
 	}
 }
 
-void __inject_pit_timer_intr(struct kvm *kvm)
+static void __inject_pit_timer_intr(struct kvm *kvm)
 {
 	mutex_lock(&kvm->lock);
 	kvm_ioapic_set_irq(kvm->arch.vioapic, 0, 1);
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index ab29cf2def47..c31164e8aa46 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -130,8 +130,10 @@ void kvm_pic_set_irq(void *opaque, int irq, int level)
 {
 	struct kvm_pic *s = opaque;
 
-	pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
-	pic_update_irq(s);
+	if (irq >= 0 && irq < PIC_NUM_PINS) {
+		pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
+		pic_update_irq(s);
+	}
 }
 
 /*
@@ -346,7 +348,8 @@ static u32 elcr_ioport_read(void *opaque, u32 addr1)
 	return s->elcr;
 }
 
-static int picdev_in_range(struct kvm_io_device *this, gpa_t addr)
+static int picdev_in_range(struct kvm_io_device *this, gpa_t addr,
+			   int len, int is_write)
 {
 	switch (addr) {
 	case 0x20:
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 2a15be2275c0..7ca47cbb48bb 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -30,6 +30,8 @@
 #include "ioapic.h"
 #include "lapic.h"
 
+#define PIC_NUM_PINS 16
+
 struct kvm;
 struct kvm_vcpu;
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ebc03f5ae162..73f43de69f67 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -356,8 +356,9 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 	case APIC_DM_SMI:
 		printk(KERN_DEBUG "Ignoring guest SMI\n");
 		break;
+
 	case APIC_DM_NMI:
-		printk(KERN_DEBUG "Ignoring guest NMI\n");
+		kvm_inject_nmi(vcpu);
 		break;
 
 	case APIC_DM_INIT:
@@ -572,6 +573,8 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 {
 	u32 val = 0;
 
+	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+
 	if (offset >= LAPIC_MMIO_LENGTH)
 		return 0;
 
@@ -695,6 +698,8 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
 	offset &= 0xff0;
 
+	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+
 	switch (offset) {
 	case APIC_ID:		/* Local APIC ID */
 		apic_set_reg(apic, APIC_ID, val);
@@ -780,7 +785,8 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
 }
 
-static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr)
+static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr,
+			   int len, int size)
 {
 	struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
 	int ret = 0;
@@ -939,8 +945,8 @@ static int __apic_timer_fn(struct kvm_lapic *apic)
 	int result = 0;
 	wait_queue_head_t *q = &apic->vcpu->wq;
 
-	atomic_inc(&apic->timer.pending);
-	set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
+	if(!atomic_inc_and_test(&apic->timer.pending))
+		set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
 	if (waitqueue_active(q)) {
 		apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 		wake_up_interruptible(q);
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 676c396c9cee..81858881287e 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -31,6 +31,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu);
 u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
 void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
 void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
+u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 7e7c3969f7a2..b0e4ddca6c18 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -66,7 +66,8 @@ static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg) {}
 #endif
 
 #if defined(MMU_DEBUG) || defined(AUDIT)
-static int dbg = 1;
+static int dbg = 0;
+module_param(dbg, bool, 0644);
 #endif
 
 #ifndef MMU_DEBUG
@@ -776,6 +777,15 @@ static void mmu_page_remove_parent_pte(struct kvm_mmu_page *sp,
 	BUG();
 }
 
+static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
+				    struct kvm_mmu_page *sp)
+{
+	int i;
+
+	for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
+		sp->spt[i] = shadow_trap_nonpresent_pte;
+}
+
 static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
 {
 	unsigned index;
@@ -841,7 +851,10 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	hlist_add_head(&sp->hash_link, bucket);
 	if (!metaphysical)
 		rmap_write_protect(vcpu->kvm, gfn);
-	vcpu->arch.mmu.prefetch_page(vcpu, sp);
+	if (shadow_trap_nonpresent_pte != shadow_notrap_nonpresent_pte)
+		vcpu->arch.mmu.prefetch_page(vcpu, sp);
+	else
+		nonpaging_prefetch_page(vcpu, sp);
 	return sp;
 }
 
@@ -917,14 +930,17 @@ static void kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 	}
 	kvm_mmu_page_unlink_children(kvm, sp);
 	if (!sp->root_count) {
-		if (!sp->role.metaphysical)
+		if (!sp->role.metaphysical && !sp->role.invalid)
 			unaccount_shadowed(kvm, sp->gfn);
 		hlist_del(&sp->hash_link);
 		kvm_mmu_free_page(kvm, sp);
 	} else {
+		int invalid = sp->role.invalid;
 		list_move(&sp->link, &kvm->arch.active_mmu_pages);
 		sp->role.invalid = 1;
 		kvm_reload_remote_mmus(kvm);
+		if (!sp->role.metaphysical && !invalid)
+			unaccount_shadowed(kvm, sp->gfn);
 	}
 	kvm_mmu_reset_last_pte_updated(kvm);
 }
@@ -1103,7 +1119,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		mark_page_dirty(vcpu->kvm, gfn);
 
 	pgprintk("%s: setting spte %llx\n", __func__, spte);
-	pgprintk("instantiating %s PTE (%s) at %d (%llx) addr %llx\n",
+	pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
 		 (spte&PT_PAGE_SIZE_MASK)? "2MB" : "4kB",
 		 (spte&PT_WRITABLE_MASK)?"RW":"R", gfn, spte, shadow_pte);
 	set_shadow_pte(shadow_pte, spte);
@@ -1122,8 +1138,10 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		else
 			kvm_release_pfn_clean(pfn);
 	}
-	if (!ptwrite || !*ptwrite)
+	if (speculative) {
 		vcpu->arch.last_pte_updated = shadow_pte;
+		vcpu->arch.last_pte_gfn = gfn;
+	}
 }
 
 static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
@@ -1171,9 +1189,10 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 				return -ENOMEM;
 			}
 
-			table[index] = __pa(new_table->spt)
-				| PT_PRESENT_MASK | PT_WRITABLE_MASK
-				| shadow_user_mask | shadow_x_mask;
+			set_shadow_pte(&table[index],
+				       __pa(new_table->spt)
+				       | PT_PRESENT_MASK | PT_WRITABLE_MASK
+				       | shadow_user_mask | shadow_x_mask);
 		}
 		table_addr = table[index] & PT64_BASE_ADDR_MASK;
 	}
@@ -1211,15 +1230,6 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 }
 
 
-static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
-				    struct kvm_mmu_page *sp)
-{
-	int i;
-
-	for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
-		sp->spt[i] = shadow_trap_nonpresent_pte;
-}
-
 static void mmu_free_roots(struct kvm_vcpu *vcpu)
 {
 	int i;
@@ -1671,6 +1681,18 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	vcpu->arch.update_pte.pfn = pfn;
 }
 
+static void kvm_mmu_access_page(struct kvm_vcpu *vcpu, gfn_t gfn)
+{
+	u64 *spte = vcpu->arch.last_pte_updated;
+
+	if (spte
+	    && vcpu->arch.last_pte_gfn == gfn
+	    && shadow_accessed_mask
+	    && !(*spte & shadow_accessed_mask)
+	    && is_shadow_present_pte(*spte))
+		set_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte);
+}
+
 void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		       const u8 *new, int bytes)
 {
@@ -1694,6 +1716,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes);
 	mmu_guess_page_from_pte_write(vcpu, gpa, new, bytes);
 	spin_lock(&vcpu->kvm->mmu_lock);
+	kvm_mmu_access_page(vcpu, gfn);
 	kvm_mmu_free_some_pages(vcpu);
 	++vcpu->kvm->stat.mmu_pte_write;
 	kvm_mmu_audit(vcpu, "pre pte write");
@@ -1948,7 +1971,7 @@ void kvm_mmu_zap_all(struct kvm *kvm)
 	kvm_flush_remote_tlbs(kvm);
 }
 
-void kvm_mmu_remove_one_alloc_mmu_page(struct kvm *kvm)
+static void kvm_mmu_remove_one_alloc_mmu_page(struct kvm *kvm)
 {
 	struct kvm_mmu_page *page;
 
@@ -1968,6 +1991,8 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
 	list_for_each_entry(kvm, &vm_list, vm_list) {
 		int npages;
 
+		if (!down_read_trylock(&kvm->slots_lock))
+			continue;
 		spin_lock(&kvm->mmu_lock);
 		npages = kvm->arch.n_alloc_mmu_pages -
 			 kvm->arch.n_free_mmu_pages;
@@ -1980,6 +2005,7 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
 		nr_to_scan--;
 
 		spin_unlock(&kvm->mmu_lock);
+		up_read(&kvm->slots_lock);
 	}
 	if (kvm_freed)
 		list_move_tail(&kvm_freed->vm_list, &vm_list);
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 1730757bbc7a..258e5d56298e 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -15,7 +15,8 @@
 #define PT_USER_MASK (1ULL << 2)
 #define PT_PWT_MASK (1ULL << 3)
 #define PT_PCD_MASK (1ULL << 4)
-#define PT_ACCESSED_MASK (1ULL << 5)
+#define PT_ACCESSED_SHIFT 5
+#define PT_ACCESSED_MASK (1ULL << PT_ACCESSED_SHIFT)
 #define PT_DIRTY_MASK (1ULL << 6)
 #define PT_PAGE_SIZE_MASK (1ULL << 7)
 #define PT_PAT_MASK (1ULL << 7)
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 934c7b619396..4d918220baeb 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -460,8 +460,9 @@ static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
 static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 				 struct kvm_mmu_page *sp)
 {
-	int i, offset = 0, r = 0;
-	pt_element_t pt;
+	int i, j, offset, r;
+	pt_element_t pt[256 / sizeof(pt_element_t)];
+	gpa_t pte_gpa;
 
 	if (sp->role.metaphysical
 	    || (PTTYPE == 32 && sp->role.level > PT_PAGE_TABLE_LEVEL)) {
@@ -469,19 +470,20 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 		return;
 	}
 
-	if (PTTYPE == 32)
+	pte_gpa = gfn_to_gpa(sp->gfn);
+	if (PTTYPE == 32) {
 		offset = sp->role.quadrant << PT64_LEVEL_BITS;
+		pte_gpa += offset * sizeof(pt_element_t);
+	}
 
-	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
-		gpa_t pte_gpa = gfn_to_gpa(sp->gfn);
-		pte_gpa += (i+offset) * sizeof(pt_element_t);
-
-		r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &pt,
-					  sizeof(pt_element_t));
-		if (r || is_present_pte(pt))
-			sp->spt[i] = shadow_trap_nonpresent_pte;
-		else
-			sp->spt[i] = shadow_notrap_nonpresent_pte;
+	for (i = 0; i < PT64_ENT_PER_PAGE; i += ARRAY_SIZE(pt)) {
+		r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, pt, sizeof pt);
+		pte_gpa += ARRAY_SIZE(pt) * sizeof(pt_element_t);
+		for (j = 0; j < ARRAY_SIZE(pt); ++j)
+			if (r || is_present_pte(pt[j]))
+				sp->spt[i+j] = shadow_trap_nonpresent_pte;
+			else
+				sp->spt[i+j] = shadow_notrap_nonpresent_pte;
 	}
 }
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 6b0d5fa5bab3..b756e876dce3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -27,6 +27,8 @@
 
 #include <asm/desc.h>
 
+#define __ex(x) __kvm_handle_fault_on_reboot(x)
+
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
@@ -129,17 +131,17 @@ static inline void push_irq(struct kvm_vcpu *vcpu, u8 irq)
 
 static inline void clgi(void)
 {
-	asm volatile (SVM_CLGI);
+	asm volatile (__ex(SVM_CLGI));
 }
 
 static inline void stgi(void)
 {
-	asm volatile (SVM_STGI);
+	asm volatile (__ex(SVM_STGI));
 }
 
 static inline void invlpga(unsigned long addr, u32 asid)
 {
-	asm volatile (SVM_INVLPGA :: "a"(addr), "c"(asid));
+	asm volatile (__ex(SVM_INVLPGA) :: "a"(addr), "c"(asid));
 }
 
 static inline unsigned long kvm_read_cr2(void)
@@ -270,19 +272,11 @@ static int has_svm(void)
 
 static void svm_hardware_disable(void *garbage)
 {
-	struct svm_cpu_data *svm_data
-		= per_cpu(svm_data, raw_smp_processor_id());
-
-	if (svm_data) {
-		uint64_t efer;
+	uint64_t efer;
 
-		wrmsrl(MSR_VM_HSAVE_PA, 0);
-		rdmsrl(MSR_EFER, efer);
-		wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
-		per_cpu(svm_data, raw_smp_processor_id()) = NULL;
-		__free_page(svm_data->save_area);
-		kfree(svm_data);
-	}
+	wrmsrl(MSR_VM_HSAVE_PA, 0);
+	rdmsrl(MSR_EFER, efer);
+	wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
 }
 
 static void svm_hardware_enable(void *garbage)
@@ -321,6 +315,19 @@ static void svm_hardware_enable(void *garbage)
 	       page_to_pfn(svm_data->save_area) << PAGE_SHIFT);
 }
 
+static void svm_cpu_uninit(int cpu)
+{
+	struct svm_cpu_data *svm_data
+		= per_cpu(svm_data, raw_smp_processor_id());
+
+	if (!svm_data)
+		return;
+
+	per_cpu(svm_data, raw_smp_processor_id()) = NULL;
+	__free_page(svm_data->save_area);
+	kfree(svm_data);
+}
+
 static int svm_cpu_init(int cpu)
 {
 	struct svm_cpu_data *svm_data;
@@ -458,6 +465,11 @@ err:
 
 static __exit void svm_hardware_unsetup(void)
 {
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		svm_cpu_uninit(cpu);
+
 	__free_pages(pfn_to_page(iopm_base >> PAGE_SHIFT), IOPM_ALLOC_ORDER);
 	iopm_base = 0;
 }
@@ -707,10 +719,6 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu)
 	rdtscll(vcpu->arch.host_tsc);
 }
 
-static void svm_vcpu_decache(struct kvm_vcpu *vcpu)
-{
-}
-
 static void svm_cache_regs(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -949,7 +957,9 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *svm_data)
 
 static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr)
 {
-	return to_svm(vcpu)->db_regs[dr];
+	unsigned long val = to_svm(vcpu)->db_regs[dr];
+	KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
+	return val;
 }
 
 static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
@@ -1004,6 +1014,16 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 
 	fault_address  = svm->vmcb->control.exit_info_2;
 	error_code = svm->vmcb->control.exit_info_1;
+
+	if (!npt_enabled)
+		KVMTRACE_3D(PAGE_FAULT, &svm->vcpu, error_code,
+			    (u32)fault_address, (u32)(fault_address >> 32),
+			    handler);
+	else
+		KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
+			    (u32)fault_address, (u32)(fault_address >> 32),
+			    handler);
+
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
@@ -1081,6 +1101,19 @@ static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return kvm_emulate_pio(&svm->vcpu, kvm_run, in, size, port);
 }
 
+static int nmi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	KVMTRACE_0D(NMI, &svm->vcpu, handler);
+	return 1;
+}
+
+static int intr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	++svm->vcpu.stat.irq_exits;
+	KVMTRACE_0D(INTR, &svm->vcpu, handler);
+	return 1;
+}
+
 static int nop_on_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	return 1;
@@ -1219,6 +1252,9 @@ static int rdmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	if (svm_get_msr(&svm->vcpu, ecx, &data))
 		kvm_inject_gp(&svm->vcpu, 0);
 	else {
+		KVMTRACE_3D(MSR_READ, &svm->vcpu, ecx, (u32)data,
+			    (u32)(data >> 32), handler);
+
 		svm->vmcb->save.rax = data & 0xffffffff;
 		svm->vcpu.arch.regs[VCPU_REGS_RDX] = data >> 32;
 		svm->next_rip = svm->vmcb->save.rip + 2;
@@ -1284,16 +1320,19 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	case MSR_K7_EVNTSEL1:
 	case MSR_K7_EVNTSEL2:
 	case MSR_K7_EVNTSEL3:
+	case MSR_K7_PERFCTR0:
+	case MSR_K7_PERFCTR1:
+	case MSR_K7_PERFCTR2:
+	case MSR_K7_PERFCTR3:
 		/*
-		 * only support writing 0 to the performance counters for now
-		 * to make Windows happy. Should be replaced by a real
-		 * performance counter emulation later.
+		 * Just discard all writes to the performance counters; this
+		 * should keep both older linux and windows 64-bit guests
+		 * happy
 		 */
-		if (data != 0)
-			goto unhandled;
+		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", ecx, data);
+
 		break;
 	default:
-	unhandled:
 		return kvm_set_msr_common(vcpu, ecx, data);
 	}
 	return 0;
@@ -1304,6 +1343,10 @@ static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u64 data = (svm->vmcb->save.rax & -1u)
 		| ((u64)(svm->vcpu.arch.regs[VCPU_REGS_RDX] & -1u) << 32);
+
+	KVMTRACE_3D(MSR_WRITE, &svm->vcpu, ecx, (u32)data, (u32)(data >> 32),
+		    handler);
+
 	svm->next_rip = svm->vmcb->save.rip + 2;
 	if (svm_set_msr(&svm->vcpu, ecx, data))
 		kvm_inject_gp(&svm->vcpu, 0);
@@ -1323,6 +1366,8 @@ static int msr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 static int interrupt_window_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
+	KVMTRACE_0D(PEND_INTR, &svm->vcpu, handler);
+
 	svm->vmcb->control.intercept &= ~(1ULL << INTERCEPT_VINTR);
 	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
 	/*
@@ -1364,8 +1409,8 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_EXCP_BASE + PF_VECTOR] 	= pf_interception,
 	[SVM_EXIT_EXCP_BASE + NM_VECTOR] 	= nm_interception,
 	[SVM_EXIT_EXCP_BASE + MC_VECTOR] 	= mc_interception,
-	[SVM_EXIT_INTR] 			= nop_on_interception,
-	[SVM_EXIT_NMI]				= nop_on_interception,
+	[SVM_EXIT_INTR] 			= intr_interception,
+	[SVM_EXIT_NMI]				= nmi_interception,
 	[SVM_EXIT_SMI]				= nop_on_interception,
 	[SVM_EXIT_INIT]				= nop_on_interception,
 	[SVM_EXIT_VINTR]			= interrupt_window_interception,
@@ -1397,6 +1442,9 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u32 exit_code = svm->vmcb->control.exit_code;
 
+	KVMTRACE_3D(VMEXIT, vcpu, exit_code, (u32)svm->vmcb->save.rip,
+		    (u32)((u64)svm->vmcb->save.rip >> 32), entryexit);
+
 	if (npt_enabled) {
 		int mmu_reload = 0;
 		if ((vcpu->arch.cr0 ^ svm->vmcb->save.cr0) & X86_CR0_PG) {
@@ -1470,6 +1518,8 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 {
 	struct vmcb_control_area *control;
 
+	KVMTRACE_1D(INJ_VIRQ, &svm->vcpu, (u32)irq, handler);
+
 	control = &svm->vmcb->control;
 	control->int_vector = irq;
 	control->int_ctl &= ~V_INTR_PRIO_MASK;
@@ -1660,9 +1710,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	sync_lapic_to_cr8(vcpu);
 
 	save_host_msrs(vcpu);
-	fs_selector = read_fs();
-	gs_selector = read_gs();
-	ldt_selector = read_ldt();
+	fs_selector = kvm_read_fs();
+	gs_selector = kvm_read_gs();
+	ldt_selector = kvm_read_ldt();
 	svm->host_cr2 = kvm_read_cr2();
 	svm->host_dr6 = read_dr6();
 	svm->host_dr7 = read_dr7();
@@ -1716,17 +1766,17 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		/* Enter guest mode */
 		"push %%rax \n\t"
 		"mov %c[vmcb](%[svm]), %%rax \n\t"
-		SVM_VMLOAD "\n\t"
-		SVM_VMRUN "\n\t"
-		SVM_VMSAVE "\n\t"
+		__ex(SVM_VMLOAD) "\n\t"
+		__ex(SVM_VMRUN) "\n\t"
+		__ex(SVM_VMSAVE) "\n\t"
 		"pop %%rax \n\t"
 #else
 		/* Enter guest mode */
 		"push %%eax \n\t"
 		"mov %c[vmcb](%[svm]), %%eax \n\t"
-		SVM_VMLOAD "\n\t"
-		SVM_VMRUN "\n\t"
-		SVM_VMSAVE "\n\t"
+		__ex(SVM_VMLOAD) "\n\t"
+		__ex(SVM_VMRUN) "\n\t"
+		__ex(SVM_VMSAVE) "\n\t"
 		"pop %%eax \n\t"
 #endif
 
@@ -1795,9 +1845,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	write_dr7(svm->host_dr7);
 	kvm_write_cr2(svm->host_cr2);
 
-	load_fs(fs_selector);
-	load_gs(gs_selector);
-	load_ldt(ldt_selector);
+	kvm_load_fs(fs_selector);
+	kvm_load_gs(gs_selector);
+	kvm_load_ldt(ldt_selector);
 	load_host_msrs(vcpu);
 
 	reload_tss(vcpu);
@@ -1889,7 +1939,6 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.prepare_guest_switch = svm_prepare_guest_switch,
 	.vcpu_load = svm_vcpu_load,
 	.vcpu_put = svm_vcpu_put,
-	.vcpu_decache = svm_vcpu_decache,
 
 	.set_guest_debug = svm_guest_debug,
 	.get_msr = svm_get_msr,
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 540e95179074..0cac63701719 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include <asm/desc.h>
 
+#define __ex(x) __kvm_handle_fault_on_reboot(x)
+
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
@@ -53,6 +55,7 @@ struct vmcs {
 
 struct vcpu_vmx {
 	struct kvm_vcpu       vcpu;
+	struct list_head      local_vcpus_link;
 	int                   launched;
 	u8                    fail;
 	u32                   idt_vectoring_info;
@@ -88,9 +91,11 @@ static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
 }
 
 static int init_rmode(struct kvm *kvm);
+static u64 construct_eptp(unsigned long root_hpa);
 
 static DEFINE_PER_CPU(struct vmcs *, vmxarea);
 static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
+static DEFINE_PER_CPU(struct list_head, vcpus_on_cpu);
 
 static struct page *vmx_io_bitmap_a;
 static struct page *vmx_io_bitmap_b;
@@ -260,6 +265,11 @@ static inline int cpu_has_vmx_vpid(void)
 		SECONDARY_EXEC_ENABLE_VPID);
 }
 
+static inline int cpu_has_virtual_nmis(void)
+{
+	return vmcs_config.pin_based_exec_ctrl & PIN_BASED_VIRTUAL_NMIS;
+}
+
 static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
 {
 	int i;
@@ -278,7 +288,7 @@ static inline void __invvpid(int ext, u16 vpid, gva_t gva)
 	u64 gva;
     } operand = { vpid, 0, gva };
 
-    asm volatile (ASM_VMX_INVVPID
+    asm volatile (__ex(ASM_VMX_INVVPID)
 		  /* CF==1 or ZF==1 --> rc = -1 */
 		  "; ja 1f ; ud2 ; 1:"
 		  : : "a"(&operand), "c"(ext) : "cc", "memory");
@@ -290,7 +300,7 @@ static inline void __invept(int ext, u64 eptp, gpa_t gpa)
 		u64 eptp, gpa;
 	} operand = {eptp, gpa};
 
-	asm volatile (ASM_VMX_INVEPT
+	asm volatile (__ex(ASM_VMX_INVEPT)
 			/* CF==1 or ZF==1 --> rc = -1 */
 			"; ja 1f ; ud2 ; 1:\n"
 			: : "a" (&operand), "c" (ext) : "cc", "memory");
@@ -311,7 +321,7 @@ static void vmcs_clear(struct vmcs *vmcs)
 	u64 phys_addr = __pa(vmcs);
 	u8 error;
 
-	asm volatile (ASM_VMX_VMCLEAR_RAX "; setna %0"
+	asm volatile (__ex(ASM_VMX_VMCLEAR_RAX) "; setna %0"
 		      : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
 		      : "cc", "memory");
 	if (error)
@@ -329,14 +339,16 @@ static void __vcpu_clear(void *arg)
 	if (per_cpu(current_vmcs, cpu) == vmx->vmcs)
 		per_cpu(current_vmcs, cpu) = NULL;
 	rdtscll(vmx->vcpu.arch.host_tsc);
+	list_del(&vmx->local_vcpus_link);
+	vmx->vcpu.cpu = -1;
+	vmx->launched = 0;
 }
 
 static void vcpu_clear(struct vcpu_vmx *vmx)
 {
 	if (vmx->vcpu.cpu == -1)
 		return;
-	smp_call_function_single(vmx->vcpu.cpu, __vcpu_clear, vmx, 0, 1);
-	vmx->launched = 0;
+	smp_call_function_single(vmx->vcpu.cpu, __vcpu_clear, vmx, 1);
 }
 
 static inline void vpid_sync_vcpu_all(struct vcpu_vmx *vmx)
@@ -378,7 +390,7 @@ static unsigned long vmcs_readl(unsigned long field)
 {
 	unsigned long value;
 
-	asm volatile (ASM_VMX_VMREAD_RDX_RAX
+	asm volatile (__ex(ASM_VMX_VMREAD_RDX_RAX)
 		      : "=a"(value) : "d"(field) : "cc");
 	return value;
 }
@@ -413,7 +425,7 @@ static void vmcs_writel(unsigned long field, unsigned long value)
 {
 	u8 error;
 
-	asm volatile (ASM_VMX_VMWRITE_RAX_RDX "; setna %0"
+	asm volatile (__ex(ASM_VMX_VMWRITE_RAX_RDX) "; setna %0"
 		       : "=q"(error) : "a"(value), "d"(field) : "cc");
 	if (unlikely(error))
 		vmwrite_error(field, value);
@@ -431,10 +443,8 @@ static void vmcs_write32(unsigned long field, u32 value)
 
 static void vmcs_write64(unsigned long field, u64 value)
 {
-#ifdef CONFIG_X86_64
-	vmcs_writel(field, value);
-#else
 	vmcs_writel(field, value);
+#ifndef CONFIG_X86_64
 	asm volatile ("");
 	vmcs_writel(field+1, value >> 32);
 #endif
@@ -474,7 +484,7 @@ static void reload_tss(void)
 	struct descriptor_table gdt;
 	struct desc_struct *descs;
 
-	get_gdt(&gdt);
+	kvm_get_gdt(&gdt);
 	descs = (void *)gdt.base;
 	descs[GDT_ENTRY_TSS].type = 9; /* available TSS */
 	load_TR_desc();
@@ -530,9 +540,9 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 	 * Set host fs and gs selectors.  Unfortunately, 22.2.3 does not
 	 * allow segment selectors with cpl > 0 or ti == 1.
 	 */
-	vmx->host_state.ldt_sel = read_ldt();
+	vmx->host_state.ldt_sel = kvm_read_ldt();
 	vmx->host_state.gs_ldt_reload_needed = vmx->host_state.ldt_sel;
-	vmx->host_state.fs_sel = read_fs();
+	vmx->host_state.fs_sel = kvm_read_fs();
 	if (!(vmx->host_state.fs_sel & 7)) {
 		vmcs_write16(HOST_FS_SELECTOR, vmx->host_state.fs_sel);
 		vmx->host_state.fs_reload_needed = 0;
@@ -540,7 +550,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 		vmcs_write16(HOST_FS_SELECTOR, 0);
 		vmx->host_state.fs_reload_needed = 1;
 	}
-	vmx->host_state.gs_sel = read_gs();
+	vmx->host_state.gs_sel = kvm_read_gs();
 	if (!(vmx->host_state.gs_sel & 7))
 		vmcs_write16(HOST_GS_SELECTOR, vmx->host_state.gs_sel);
 	else {
@@ -576,15 +586,15 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 	++vmx->vcpu.stat.host_state_reload;
 	vmx->host_state.loaded = 0;
 	if (vmx->host_state.fs_reload_needed)
-		load_fs(vmx->host_state.fs_sel);
+		kvm_load_fs(vmx->host_state.fs_sel);
 	if (vmx->host_state.gs_ldt_reload_needed) {
-		load_ldt(vmx->host_state.ldt_sel);
+		kvm_load_ldt(vmx->host_state.ldt_sel);
 		/*
 		 * If we have to reload gs, we must take care to
 		 * preserve our gs base.
 		 */
 		local_irq_save(flags);
-		load_gs(vmx->host_state.gs_sel);
+		kvm_load_gs(vmx->host_state.gs_sel);
 #ifdef CONFIG_X86_64
 		wrmsrl(MSR_GS_BASE, vmcs_readl(HOST_GS_BASE));
 #endif
@@ -617,13 +627,17 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		vcpu_clear(vmx);
 		kvm_migrate_timers(vcpu);
 		vpid_sync_vcpu_all(vmx);
+		local_irq_disable();
+		list_add(&vmx->local_vcpus_link,
+			 &per_cpu(vcpus_on_cpu, cpu));
+		local_irq_enable();
 	}
 
 	if (per_cpu(current_vmcs, cpu) != vmx->vmcs) {
 		u8 error;
 
 		per_cpu(current_vmcs, cpu) = vmx->vmcs;
-		asm volatile (ASM_VMX_VMPTRLD_RAX "; setna %0"
+		asm volatile (__ex(ASM_VMX_VMPTRLD_RAX) "; setna %0"
 			      : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
 			      : "cc");
 		if (error)
@@ -640,8 +654,8 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		 * Linux uses per-cpu TSS and GDT, so set these when switching
 		 * processors.
 		 */
-		vmcs_writel(HOST_TR_BASE, read_tr_base()); /* 22.2.4 */
-		get_gdt(&dt);
+		vmcs_writel(HOST_TR_BASE, kvm_read_tr_base()); /* 22.2.4 */
+		kvm_get_gdt(&dt);
 		vmcs_writel(HOST_GDTR_BASE, dt.base);   /* 22.2.4 */
 
 		rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp);
@@ -684,11 +698,6 @@ static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
 	update_exception_bitmap(vcpu);
 }
 
-static void vmx_vcpu_decache(struct kvm_vcpu *vcpu)
-{
-	vcpu_clear(to_vmx(vcpu));
-}
-
 static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 {
 	return vmcs_readl(GUEST_RFLAGS);
@@ -913,6 +922,18 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	case MSR_IA32_TIME_STAMP_COUNTER:
 		guest_write_tsc(data);
 		break;
+	case MSR_P6_PERFCTR0:
+	case MSR_P6_PERFCTR1:
+	case MSR_P6_EVNTSEL0:
+	case MSR_P6_EVNTSEL1:
+		/*
+		 * Just discard all writes to the performance counters; this
+		 * should keep both older linux and windows 64-bit guests
+		 * happy
+		 */
+		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", msr_index, data);
+
+		break;
 	default:
 		vmx_load_host_state(vmx);
 		msr = find_msr_entry(vmx, msr_index);
@@ -1022,6 +1043,7 @@ static void hardware_enable(void *garbage)
 	u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
 	u64 old;
 
+	INIT_LIST_HEAD(&per_cpu(vcpus_on_cpu, cpu));
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
 	if ((old & (MSR_IA32_FEATURE_CONTROL_LOCKED |
 		    MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED))
@@ -1032,13 +1054,25 @@ static void hardware_enable(void *garbage)
 		       MSR_IA32_FEATURE_CONTROL_LOCKED |
 		       MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED);
 	write_cr4(read_cr4() | X86_CR4_VMXE); /* FIXME: not cpu hotplug safe */
-	asm volatile (ASM_VMX_VMXON_RAX : : "a"(&phys_addr), "m"(phys_addr)
+	asm volatile (ASM_VMX_VMXON_RAX
+		      : : "a"(&phys_addr), "m"(phys_addr)
 		      : "memory", "cc");
 }
 
+static void vmclear_local_vcpus(void)
+{
+	int cpu = raw_smp_processor_id();
+	struct vcpu_vmx *vmx, *n;
+
+	list_for_each_entry_safe(vmx, n, &per_cpu(vcpus_on_cpu, cpu),
+				 local_vcpus_link)
+		__vcpu_clear(vmx);
+}
+
 static void hardware_disable(void *garbage)
 {
-	asm volatile (ASM_VMX_VMXOFF : : : "cc");
+	vmclear_local_vcpus();
+	asm volatile (__ex(ASM_VMX_VMXOFF) : : : "cc");
 	write_cr4(read_cr4() & ~X86_CR4_VMXE);
 }
 
@@ -1072,7 +1106,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 	u32 _vmentry_control = 0;
 
 	min = PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING;
-	opt = 0;
+	opt = PIN_BASED_VIRTUAL_NMIS;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PINBASED_CTLS,
 				&_pin_based_exec_control) < 0)
 		return -EIO;
@@ -1389,6 +1423,8 @@ static void exit_lmode(struct kvm_vcpu *vcpu)
 static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
 {
 	vpid_sync_vcpu_all(to_vmx(vcpu));
+	if (vm_need_ept())
+		ept_sync_context(construct_eptp(vcpu->arch.mmu.root_hpa));
 }
 
 static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
@@ -1420,7 +1456,7 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 	if (!(cr0 & X86_CR0_PG)) {
 		/* From paging/starting to nonpaging */
 		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
-			     vmcs_config.cpu_based_exec_ctrl |
+			     vmcs_read32(CPU_BASED_VM_EXEC_CONTROL) |
 			     (CPU_BASED_CR3_LOAD_EXITING |
 			      CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
@@ -1430,7 +1466,7 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 	} else if (!is_paging(vcpu)) {
 		/* From nonpaging to paging */
 		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
-			     vmcs_config.cpu_based_exec_ctrl &
+			     vmcs_read32(CPU_BASED_VM_EXEC_CONTROL) &
 			     ~(CPU_BASED_CR3_LOAD_EXITING |
 			       CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
@@ -1821,7 +1857,7 @@ static void allocate_vpid(struct vcpu_vmx *vmx)
 	spin_unlock(&vmx_vpid_lock);
 }
 
-void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
+static void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
 {
 	void *va;
 
@@ -1907,8 +1943,8 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS);  /* 22.2.4 */
 	vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
 	vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
-	vmcs_write16(HOST_FS_SELECTOR, read_fs());    /* 22.2.4 */
-	vmcs_write16(HOST_GS_SELECTOR, read_gs());    /* 22.2.4 */
+	vmcs_write16(HOST_FS_SELECTOR, kvm_read_fs());    /* 22.2.4 */
+	vmcs_write16(HOST_GS_SELECTOR, kvm_read_gs());    /* 22.2.4 */
 	vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
 #ifdef CONFIG_X86_64
 	rdmsrl(MSR_FS_BASE, a);
@@ -1922,7 +1958,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 
 	vmcs_write16(HOST_TR_SELECTOR, GDT_ENTRY_TSS*8);  /* 22.2.4 */
 
-	get_idt(&dt);
+	kvm_get_idt(&dt);
 	vmcs_writel(HOST_IDTR_BASE, dt.base);   /* 22.2.4 */
 
 	asm("mov $.Lkvm_vmx_return, %0" : "=r"(kvm_vmx_return));
@@ -2114,6 +2150,13 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu, int irq)
 			irq | INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
 }
 
+static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
+{
+	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+			INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK | NMI_VECTOR);
+	vcpu->arch.nmi_pending = 0;
+}
+
 static void kvm_do_inject_irq(struct kvm_vcpu *vcpu)
 {
 	int word_index = __ffs(vcpu->arch.irq_summary);
@@ -2554,8 +2597,6 @@ static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
 	offset = exit_qualification & 0xffful;
 
-	KVMTRACE_1D(APIC_ACCESS, vcpu, (u32)offset, handler);
-
 	er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
 
 	if (er !=  EMULATE_DONE) {
@@ -2639,6 +2680,19 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	u32 cpu_based_vm_exec_control;
+
+	/* clear pending NMI */
+	cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
+	cpu_based_vm_exec_control &= ~CPU_BASED_VIRTUAL_NMI_PENDING;
+	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+	++vcpu->stat.nmi_window_exits;
+
+	return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -2649,6 +2703,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_EXCEPTION_NMI]           = handle_exception,
 	[EXIT_REASON_EXTERNAL_INTERRUPT]      = handle_external_interrupt,
 	[EXIT_REASON_TRIPLE_FAULT]            = handle_triple_fault,
+	[EXIT_REASON_NMI_WINDOW]	      = handle_nmi_window,
 	[EXIT_REASON_IO_INSTRUCTION]          = handle_io,
 	[EXIT_REASON_CR_ACCESS]               = handle_cr,
 	[EXIT_REASON_DR_ACCESS]               = handle_dr,
@@ -2736,17 +2791,52 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
 	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
 }
 
+static void enable_nmi_window(struct kvm_vcpu *vcpu)
+{
+	u32 cpu_based_vm_exec_control;
+
+	if (!cpu_has_virtual_nmis())
+		return;
+
+	cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
+	cpu_based_vm_exec_control |= CPU_BASED_VIRTUAL_NMI_PENDING;
+	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+}
+
+static int vmx_nmi_enabled(struct kvm_vcpu *vcpu)
+{
+	u32 guest_intr = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+	return !(guest_intr & (GUEST_INTR_STATE_NMI |
+			       GUEST_INTR_STATE_MOV_SS |
+			       GUEST_INTR_STATE_STI));
+}
+
+static int vmx_irq_enabled(struct kvm_vcpu *vcpu)
+{
+	u32 guest_intr = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+	return (!(guest_intr & (GUEST_INTR_STATE_MOV_SS |
+			       GUEST_INTR_STATE_STI)) &&
+		(vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF));
+}
+
+static void enable_intr_window(struct kvm_vcpu *vcpu)
+{
+	if (vcpu->arch.nmi_pending)
+		enable_nmi_window(vcpu);
+	else if (kvm_cpu_has_interrupt(vcpu))
+		enable_irq_window(vcpu);
+}
+
 static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u32 idtv_info_field, intr_info_field;
-	int has_ext_irq, interrupt_window_open;
+	u32 idtv_info_field, intr_info_field, exit_intr_info_field;
 	int vector;
 
 	update_tpr_threshold(vcpu);
 
-	has_ext_irq = kvm_cpu_has_interrupt(vcpu);
 	intr_info_field = vmcs_read32(VM_ENTRY_INTR_INFO_FIELD);
+	exit_intr_info_field = vmcs_read32(VM_EXIT_INTR_INFO);
 	idtv_info_field = vmx->idt_vectoring_info;
 	if (intr_info_field & INTR_INFO_VALID_MASK) {
 		if (idtv_info_field & INTR_INFO_VALID_MASK) {
@@ -2754,8 +2844,7 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 			if (printk_ratelimit())
 				printk(KERN_ERR "Fault when IDT_Vectoring\n");
 		}
-		if (has_ext_irq)
-			enable_irq_window(vcpu);
+		enable_intr_window(vcpu);
 		return;
 	}
 	if (unlikely(idtv_info_field & INTR_INFO_VALID_MASK)) {
@@ -2765,30 +2854,56 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 			u8 vect = idtv_info_field & VECTORING_INFO_VECTOR_MASK;
 
 			vmx_inject_irq(vcpu, vect);
-			if (unlikely(has_ext_irq))
-				enable_irq_window(vcpu);
+			enable_intr_window(vcpu);
 			return;
 		}
 
 		KVMTRACE_1D(REDELIVER_EVT, vcpu, idtv_info_field, handler);
 
-		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, idtv_info_field);
+		/*
+		 * SDM 3: 25.7.1.2
+		 * Clear bit "block by NMI" before VM entry if a NMI delivery
+		 * faulted.
+		 */
+		if ((idtv_info_field & VECTORING_INFO_TYPE_MASK)
+		    == INTR_TYPE_NMI_INTR && cpu_has_virtual_nmis())
+			vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+				vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+				~GUEST_INTR_STATE_NMI);
+
+		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, idtv_info_field
+				& ~INTR_INFO_RESVD_BITS_MASK);
 		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
 				vmcs_read32(VM_EXIT_INSTRUCTION_LEN));
 
 		if (unlikely(idtv_info_field & INTR_INFO_DELIVER_CODE_MASK))
 			vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE,
 				vmcs_read32(IDT_VECTORING_ERROR_CODE));
-		if (unlikely(has_ext_irq))
-			enable_irq_window(vcpu);
+		enable_intr_window(vcpu);
 		return;
 	}
-	if (!has_ext_irq)
+	if (cpu_has_virtual_nmis()) {
+		/*
+		 * SDM 3: 25.7.1.2
+		 * Re-set bit "block by NMI" before VM entry if vmexit caused by
+		 * a guest IRET fault.
+		 */
+		if ((exit_intr_info_field & INTR_INFO_UNBLOCK_NMI) &&
+		    (exit_intr_info_field & INTR_INFO_VECTOR_MASK) != 8)
+			vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+				vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) |
+				GUEST_INTR_STATE_NMI);
+		else if (vcpu->arch.nmi_pending) {
+			if (vmx_nmi_enabled(vcpu))
+				vmx_inject_nmi(vcpu);
+			enable_intr_window(vcpu);
+			return;
+		}
+
+	}
+	if (!kvm_cpu_has_interrupt(vcpu))
 		return;
-	interrupt_window_open =
-		((vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
-		 (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0);
-	if (interrupt_window_open) {
+	if (vmx_irq_enabled(vcpu)) {
 		vector = kvm_cpu_get_interrupt(vcpu);
 		vmx_inject_irq(vcpu, vector);
 		kvm_timer_intr_post(vcpu, vector);
@@ -2838,7 +2953,7 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		"push %%edx; push %%ebp;"
 		"push %%ecx \n\t"
 #endif
-		ASM_VMX_VMWRITE_RSP_RDX "\n\t"
+		__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
 		/* Check if vmlaunch of vmresume is needed */
 		"cmpl $0, %c[launched](%0) \n\t"
 		/* Load guest registers.  Don't clobber flags. */
@@ -2873,9 +2988,9 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 #endif
 		/* Enter guest mode */
 		"jne .Llaunched \n\t"
-		ASM_VMX_VMLAUNCH "\n\t"
+		__ex(ASM_VMX_VMLAUNCH) "\n\t"
 		"jmp .Lkvm_vmx_return \n\t"
-		".Llaunched: " ASM_VMX_VMRESUME "\n\t"
+		".Llaunched: " __ex(ASM_VMX_VMRESUME) "\n\t"
 		".Lkvm_vmx_return: "
 		/* Save guest registers, load host registers, keep flags */
 #ifdef CONFIG_X86_64
@@ -2949,7 +3064,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		fixup_rmode_irq(vmx);
 
 	vcpu->arch.interrupt_window_open =
-		(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0;
+		(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+		 (GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS)) == 0;
 
 	asm("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
 	vmx->launched = 1;
@@ -2957,7 +3073,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
 
 	/* We need to handle NMIs before interrupts are enabled */
-	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == 0x200) { /* nmi */
+	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == 0x200 &&
+	    (intr_info & INTR_INFO_VALID_MASK)) {
 		KVMTRACE_0D(NMI, vcpu, handler);
 		asm("int $2");
 	}
@@ -2968,7 +3085,7 @@ static void vmx_free_vmcs(struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	if (vmx->vmcs) {
-		on_each_cpu(__vcpu_clear, vmx, 0, 1);
+		vcpu_clear(vmx);
 		free_vmcs(vmx->vmcs);
 		vmx->vmcs = NULL;
 	}
@@ -3095,7 +3212,6 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.prepare_guest_switch = vmx_save_host_state,
 	.vcpu_load = vmx_vcpu_load,
 	.vcpu_put = vmx_vcpu_put,
-	.vcpu_decache = vmx_vcpu_decache,
 
 	.set_guest_debug = set_guest_debug,
 	.guest_debug_pre = kvm_guest_debug_pre,
diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h
index 79d94c610dfe..425a13436b3f 100644
--- a/arch/x86/kvm/vmx.h
+++ b/arch/x86/kvm/vmx.h
@@ -40,6 +40,7 @@
 #define CPU_BASED_CR8_LOAD_EXITING              0x00080000
 #define CPU_BASED_CR8_STORE_EXITING             0x00100000
 #define CPU_BASED_TPR_SHADOW                    0x00200000
+#define CPU_BASED_VIRTUAL_NMI_PENDING		0x00400000
 #define CPU_BASED_MOV_DR_EXITING                0x00800000
 #define CPU_BASED_UNCOND_IO_EXITING             0x01000000
 #define CPU_BASED_USE_IO_BITMAPS                0x02000000
@@ -216,7 +217,7 @@ enum vmcs_field {
 #define EXIT_REASON_TRIPLE_FAULT        2
 
 #define EXIT_REASON_PENDING_INTERRUPT   7
-
+#define EXIT_REASON_NMI_WINDOW		8
 #define EXIT_REASON_TASK_SWITCH         9
 #define EXIT_REASON_CPUID               10
 #define EXIT_REASON_HLT                 12
@@ -251,7 +252,9 @@ enum vmcs_field {
 #define INTR_INFO_VECTOR_MASK           0xff            /* 7:0 */
 #define INTR_INFO_INTR_TYPE_MASK        0x700           /* 10:8 */
 #define INTR_INFO_DELIVER_CODE_MASK     0x800           /* 11 */
+#define INTR_INFO_UNBLOCK_NMI		0x1000		/* 12 */
 #define INTR_INFO_VALID_MASK            0x80000000      /* 31 */
+#define INTR_INFO_RESVD_BITS_MASK       0x7ffff000
 
 #define VECTORING_INFO_VECTOR_MASK           	INTR_INFO_VECTOR_MASK
 #define VECTORING_INFO_TYPE_MASK        	INTR_INFO_INTR_TYPE_MASK
@@ -259,9 +262,16 @@ enum vmcs_field {
 #define VECTORING_INFO_VALID_MASK       	INTR_INFO_VALID_MASK
 
 #define INTR_TYPE_EXT_INTR              (0 << 8) /* external interrupt */
+#define INTR_TYPE_NMI_INTR		(2 << 8) /* NMI */
 #define INTR_TYPE_EXCEPTION             (3 << 8) /* processor exception */
 #define INTR_TYPE_SOFT_INTR             (4 << 8) /* software interrupt */
 
+/* GUEST_INTERRUPTIBILITY_INFO flags. */
+#define GUEST_INTR_STATE_STI		0x00000001
+#define GUEST_INTR_STATE_MOV_SS		0x00000002
+#define GUEST_INTR_STATE_SMI		0x00000004
+#define GUEST_INTR_STATE_NMI		0x00000008
+
 /*
  * Exit Qualifications for MOV for Control Register Access
  */
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 63a77caa59f1..9f1cdb011cff 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -72,6 +72,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "mmio_exits", VCPU_STAT(mmio_exits) },
 	{ "signal_exits", VCPU_STAT(signal_exits) },
 	{ "irq_window", VCPU_STAT(irq_window_exits) },
+	{ "nmi_window", VCPU_STAT(nmi_window_exits) },
 	{ "halt_exits", VCPU_STAT(halt_exits) },
 	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
 	{ "hypercalls", VCPU_STAT(hypercalls) },
@@ -173,6 +174,12 @@ void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long addr,
 	kvm_queue_exception_e(vcpu, PF_VECTOR, error_code);
 }
 
+void kvm_inject_nmi(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.nmi_pending = 1;
+}
+EXPORT_SYMBOL_GPL(kvm_inject_nmi);
+
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
 {
 	WARN_ON(vcpu->arch.exception.pending);
@@ -604,6 +611,38 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 	mark_page_dirty(v->kvm, vcpu->time >> PAGE_SHIFT);
 }
 
+static bool msr_mtrr_valid(unsigned msr)
+{
+	switch (msr) {
+	case 0x200 ... 0x200 + 2 * KVM_NR_VAR_MTRR - 1:
+	case MSR_MTRRfix64K_00000:
+	case MSR_MTRRfix16K_80000:
+	case MSR_MTRRfix16K_A0000:
+	case MSR_MTRRfix4K_C0000:
+	case MSR_MTRRfix4K_C8000:
+	case MSR_MTRRfix4K_D0000:
+	case MSR_MTRRfix4K_D8000:
+	case MSR_MTRRfix4K_E0000:
+	case MSR_MTRRfix4K_E8000:
+	case MSR_MTRRfix4K_F0000:
+	case MSR_MTRRfix4K_F8000:
+	case MSR_MTRRdefType:
+	case MSR_IA32_CR_PAT:
+		return true;
+	case 0x2f8:
+		return true;
+	}
+	return false;
+}
+
+static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	if (!msr_mtrr_valid(msr))
+		return 1;
+
+	vcpu->arch.mtrr[msr - 0x200] = data;
+	return 0;
+}
 
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
@@ -625,8 +664,9 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		break;
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_UCODE_WRITE:
-	case 0x200 ... 0x2ff: /* MTRRs */
 		break;
+	case 0x200 ... 0x2ff:
+		return set_msr_mtrr(vcpu, msr, data);
 	case MSR_IA32_APICBASE:
 		kvm_set_apic_base(vcpu, data);
 		break;
@@ -684,6 +724,15 @@ int kvm_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 	return kvm_x86_ops->get_msr(vcpu, msr_index, pdata);
 }
 
+static int get_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+	if (!msr_mtrr_valid(msr))
+		return 1;
+
+	*pdata = vcpu->arch.mtrr[msr - 0x200];
+	return 0;
+}
+
 int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 {
 	u64 data;
@@ -705,11 +754,13 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_MC0_MISC+16:
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_EBL_CR_POWERON:
-		/* MTRR registers */
-	case 0xfe:
-	case 0x200 ... 0x2ff:
 		data = 0;
 		break;
+	case MSR_MTRRcap:
+		data = 0x500 | KVM_NR_VAR_MTRR;
+		break;
+	case 0x200 ... 0x2ff:
+		return get_msr_mtrr(vcpu, msr, pdata);
 	case 0xcd: /* fsb frequency */
 		data = 3;
 		break;
@@ -817,41 +868,6 @@ out:
 	return r;
 }
 
-/*
- * Make sure that a cpu that is being hot-unplugged does not have any vcpus
- * cached on it.
- */
-void decache_vcpus_on_cpu(int cpu)
-{
-	struct kvm *vm;
-	struct kvm_vcpu *vcpu;
-	int i;
-
-	spin_lock(&kvm_lock);
-	list_for_each_entry(vm, &vm_list, vm_list)
-		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-			vcpu = vm->vcpus[i];
-			if (!vcpu)
-				continue;
-			/*
-			 * If the vcpu is locked, then it is running on some
-			 * other cpu and therefore it is not cached on the
-			 * cpu in question.
-			 *
-			 * If it's not locked, check the last cpu it executed
-			 * on.
-			 */
-			if (mutex_trylock(&vcpu->mutex)) {
-				if (vcpu->cpu == cpu) {
-					kvm_x86_ops->vcpu_decache(vcpu);
-					vcpu->cpu = -1;
-				}
-				mutex_unlock(&vcpu->mutex);
-			}
-		}
-	spin_unlock(&kvm_lock);
-}
-
 int kvm_dev_ioctl_check_extension(long ext)
 {
 	int r;
@@ -869,6 +885,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_MP_STATE:
 		r = 1;
 		break;
+	case KVM_CAP_COALESCED_MMIO:
+		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+		break;
 	case KVM_CAP_VAPIC:
 		r = !kvm_x86_ops->cpu_has_accelerated_tpr();
 		break;
@@ -1781,13 +1800,14 @@ static void kvm_init_msr_list(void)
  * Only apic need an MMIO device hook, so shortcut now..
  */
 static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr)
+						gpa_t addr, int len,
+						int is_write)
 {
 	struct kvm_io_device *dev;
 
 	if (vcpu->arch.apic) {
 		dev = &vcpu->arch.apic->dev;
-		if (dev->in_range(dev, addr))
+		if (dev->in_range(dev, addr, len, is_write))
 			return dev;
 	}
 	return NULL;
@@ -1795,13 +1815,15 @@ static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
 
 
 static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr)
+						gpa_t addr, int len,
+						int is_write)
 {
 	struct kvm_io_device *dev;
 
-	dev = vcpu_find_pervcpu_dev(vcpu, addr);
+	dev = vcpu_find_pervcpu_dev(vcpu, addr, len, is_write);
 	if (dev == NULL)
-		dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr);
+		dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len,
+					  is_write);
 	return dev;
 }
 
@@ -1869,7 +1891,7 @@ mmio:
 	 * Is this MMIO handled locally?
 	 */
 	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa);
+	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 0);
 	if (mmio_dev) {
 		kvm_iodevice_read(mmio_dev, gpa, bytes, val);
 		mutex_unlock(&vcpu->kvm->lock);
@@ -1924,7 +1946,7 @@ mmio:
 	 * Is this MMIO handled locally?
 	 */
 	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa);
+	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 1);
 	if (mmio_dev) {
 		kvm_iodevice_write(mmio_dev, gpa, bytes, val);
 		mutex_unlock(&vcpu->kvm->lock);
@@ -2020,6 +2042,7 @@ int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
 
 int emulate_clts(struct kvm_vcpu *vcpu)
 {
+	KVMTRACE_0D(CLTS, vcpu, handler);
 	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 & ~X86_CR0_TS);
 	return X86EMUL_CONTINUE;
 }
@@ -2053,21 +2076,19 @@ int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long value)
 
 void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
 {
-	static int reported;
 	u8 opcodes[4];
 	unsigned long rip = vcpu->arch.rip;
 	unsigned long rip_linear;
 
-	rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
-
-	if (reported)
+	if (!printk_ratelimit())
 		return;
 
+	rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
+
 	emulator_read_std(rip_linear, (void *)opcodes, 4, vcpu);
 
 	printk(KERN_ERR "emulation failed (%s) rip %lx %02x %02x %02x %02x\n",
 	       context, rip, opcodes[0], opcodes[1], opcodes[2], opcodes[3]);
-	reported = 1;
 }
 EXPORT_SYMBOL_GPL(kvm_report_emulation_failure);
 
@@ -2105,27 +2126,6 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 			? X86EMUL_MODE_PROT64 :	cs_db
 			? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
 
-		if (vcpu->arch.emulate_ctxt.mode == X86EMUL_MODE_PROT64) {
-			vcpu->arch.emulate_ctxt.cs_base = 0;
-			vcpu->arch.emulate_ctxt.ds_base = 0;
-			vcpu->arch.emulate_ctxt.es_base = 0;
-			vcpu->arch.emulate_ctxt.ss_base = 0;
-		} else {
-			vcpu->arch.emulate_ctxt.cs_base =
-					get_segment_base(vcpu, VCPU_SREG_CS);
-			vcpu->arch.emulate_ctxt.ds_base =
-					get_segment_base(vcpu, VCPU_SREG_DS);
-			vcpu->arch.emulate_ctxt.es_base =
-					get_segment_base(vcpu, VCPU_SREG_ES);
-			vcpu->arch.emulate_ctxt.ss_base =
-					get_segment_base(vcpu, VCPU_SREG_SS);
-		}
-
-		vcpu->arch.emulate_ctxt.gs_base =
-					get_segment_base(vcpu, VCPU_SREG_GS);
-		vcpu->arch.emulate_ctxt.fs_base =
-					get_segment_base(vcpu, VCPU_SREG_FS);
-
 		r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
 
 		/* Reject the instructions other than VMCALL/VMMCALL when
@@ -2300,9 +2300,10 @@ static void pio_string_write(struct kvm_io_device *pio_dev,
 }
 
 static struct kvm_io_device *vcpu_find_pio_dev(struct kvm_vcpu *vcpu,
-					       gpa_t addr)
+					       gpa_t addr, int len,
+					       int is_write)
 {
-	return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr);
+	return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr, len, is_write);
 }
 
 int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
@@ -2331,11 +2332,10 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 
 	kvm_x86_ops->cache_regs(vcpu);
 	memcpy(vcpu->arch.pio_data, &vcpu->arch.regs[VCPU_REGS_RAX], 4);
-	kvm_x86_ops->decache_regs(vcpu);
 
 	kvm_x86_ops->skip_emulated_instruction(vcpu);
 
-	pio_dev = vcpu_find_pio_dev(vcpu, port);
+	pio_dev = vcpu_find_pio_dev(vcpu, port, size, !in);
 	if (pio_dev) {
 		kernel_pio(pio_dev, vcpu, vcpu->arch.pio_data);
 		complete_pio(vcpu);
@@ -2417,7 +2417,9 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 		}
 	}
 
-	pio_dev = vcpu_find_pio_dev(vcpu, port);
+	pio_dev = vcpu_find_pio_dev(vcpu, port,
+				    vcpu->arch.pio.cur_count,
+				    !vcpu->arch.pio.in);
 	if (!vcpu->arch.pio.in) {
 		/* string PIO write */
 		ret = pio_copy_data(vcpu);
@@ -2600,27 +2602,41 @@ void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
 
 unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
 {
+	unsigned long value;
+
 	kvm_x86_ops->decache_cr4_guest_bits(vcpu);
 	switch (cr) {
 	case 0:
-		return vcpu->arch.cr0;
+		value = vcpu->arch.cr0;
+		break;
 	case 2:
-		return vcpu->arch.cr2;
+		value = vcpu->arch.cr2;
+		break;
 	case 3:
-		return vcpu->arch.cr3;
+		value = vcpu->arch.cr3;
+		break;
 	case 4:
-		return vcpu->arch.cr4;
+		value = vcpu->arch.cr4;
+		break;
 	case 8:
-		return kvm_get_cr8(vcpu);
+		value = kvm_get_cr8(vcpu);
+		break;
 	default:
 		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
 		return 0;
 	}
+	KVMTRACE_3D(CR_READ, vcpu, (u32)cr, (u32)value,
+		    (u32)((u64)value >> 32), handler);
+
+	return value;
 }
 
 void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
 		     unsigned long *rflags)
 {
+	KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr, (u32)val,
+		    (u32)((u64)val >> 32), handler);
+
 	switch (cr) {
 	case 0:
 		kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
@@ -2771,8 +2787,10 @@ static void vapic_exit(struct kvm_vcpu *vcpu)
 	if (!apic || !apic->vapic_addr)
 		return;
 
+	down_read(&vcpu->kvm->slots_lock);
 	kvm_release_page_dirty(apic->vapic_page);
 	mark_page_dirty(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
+	up_read(&vcpu->kvm->slots_lock);
 }
 
 static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
@@ -2928,9 +2946,7 @@ out:
 
 	post_kvm_run_save(vcpu, kvm_run);
 
-	down_read(&vcpu->kvm->slots_lock);
 	vapic_exit(vcpu);
-	up_read(&vcpu->kvm->slots_lock);
 
 	return r;
 }
@@ -2942,15 +2958,15 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	vcpu_load(vcpu);
 
+	if (vcpu->sigset_active)
+		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
+
 	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) {
 		kvm_vcpu_block(vcpu);
-		vcpu_put(vcpu);
-		return -EAGAIN;
+		r = -EAGAIN;
+		goto out;
 	}
 
-	if (vcpu->sigset_active)
-		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
-
 	/* re-sync apic's tpr */
 	if (!irqchip_in_kernel(vcpu->kvm))
 		kvm_set_cr8(vcpu, kvm_run->cr8);
@@ -3070,8 +3086,8 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	return 0;
 }
 
-static void get_segment(struct kvm_vcpu *vcpu,
-			struct kvm_segment *var, int seg)
+void kvm_get_segment(struct kvm_vcpu *vcpu,
+		     struct kvm_segment *var, int seg)
 {
 	kvm_x86_ops->get_segment(vcpu, var, seg);
 }
@@ -3080,7 +3096,7 @@ void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
 {
 	struct kvm_segment cs;
 
-	get_segment(vcpu, &cs, VCPU_SREG_CS);
+	kvm_get_segment(vcpu, &cs, VCPU_SREG_CS);
 	*db = cs.db;
 	*l = cs.l;
 }
@@ -3094,15 +3110,15 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 
 	vcpu_load(vcpu);
 
-	get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
-	get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
-	get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
-	get_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
-	get_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
-	get_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+	kvm_get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+	kvm_get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+	kvm_get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+	kvm_get_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+	kvm_get_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+	kvm_get_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
 
-	get_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
-	get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+	kvm_get_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+	kvm_get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
 	kvm_x86_ops->get_idt(vcpu, &dt);
 	sregs->idt.limit = dt.limit;
@@ -3154,7 +3170,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-static void set_segment(struct kvm_vcpu *vcpu,
+static void kvm_set_segment(struct kvm_vcpu *vcpu,
 			struct kvm_segment *var, int seg)
 {
 	kvm_x86_ops->set_segment(vcpu, var, seg);
@@ -3191,7 +3207,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu,
 	if (selector & 1 << 2) {
 		struct kvm_segment kvm_seg;
 
-		get_segment(vcpu, &kvm_seg, VCPU_SREG_LDTR);
+		kvm_get_segment(vcpu, &kvm_seg, VCPU_SREG_LDTR);
 
 		if (kvm_seg.unusable)
 			dtable->limit = 0;
@@ -3297,7 +3313,7 @@ static u16 get_segment_selector(struct kvm_vcpu *vcpu, int seg)
 {
 	struct kvm_segment kvm_seg;
 
-	get_segment(vcpu, &kvm_seg, seg);
+	kvm_get_segment(vcpu, &kvm_seg, seg);
 	return kvm_seg.selector;
 }
 
@@ -3313,8 +3329,8 @@ static int load_segment_descriptor_to_kvm_desct(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-static int load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
-				   int type_bits, int seg)
+int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
+				int type_bits, int seg)
 {
 	struct kvm_segment kvm_seg;
 
@@ -3327,7 +3343,7 @@ static int load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 		if (!kvm_seg.s)
 			kvm_seg.unusable = 1;
 
-	set_segment(vcpu, &kvm_seg, seg);
+	kvm_set_segment(vcpu, &kvm_seg, seg);
 	return 0;
 }
 
@@ -3373,25 +3389,25 @@ static int load_state_from_tss32(struct kvm_vcpu *vcpu,
 	vcpu->arch.regs[VCPU_REGS_RSI] = tss->esi;
 	vcpu->arch.regs[VCPU_REGS_RDI] = tss->edi;
 
-	if (load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
+	if (kvm_load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
+	if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
+	if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
+	if (kvm_load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
+	if (kvm_load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
 		return 1;
 	return 0;
 }
@@ -3432,24 +3448,24 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu,
 	vcpu->arch.regs[VCPU_REGS_RSI] = tss->si;
 	vcpu->arch.regs[VCPU_REGS_RDI] = tss->di;
 
-	if (load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
+	if (kvm_load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
+	if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
+	if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
 		return 1;
 	return 0;
 }
 
-int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
+static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
 		       struct desc_struct *cseg_desc,
 		       struct desc_struct *nseg_desc)
 {
@@ -3472,7 +3488,7 @@ out:
 	return ret;
 }
 
-int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
+static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
 		       struct desc_struct *cseg_desc,
 		       struct desc_struct *nseg_desc)
 {
@@ -3502,7 +3518,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	struct desc_struct nseg_desc;
 	int ret = 0;
 
-	get_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+	kvm_get_segment(vcpu, &tr_seg, VCPU_SREG_TR);
 
 	if (load_guest_segment_descriptor(vcpu, tss_selector, &nseg_desc))
 		goto out;
@@ -3561,7 +3577,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 | X86_CR0_TS);
 	seg_desct_to_kvm_desct(&nseg_desc, tss_selector, &tr_seg);
 	tr_seg.type = 11;
-	set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+	kvm_set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
 out:
 	kvm_x86_ops->decache_regs(vcpu);
 	return ret;
@@ -3628,15 +3644,15 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 		}
 	}
 
-	set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
-	set_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
-	set_segment(vcpu, &sregs->es, VCPU_SREG_ES);
-	set_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
-	set_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
-	set_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+	kvm_set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+	kvm_set_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+	kvm_set_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+	kvm_set_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+	kvm_set_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+	kvm_set_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
 
-	set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
-	set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+	kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+	kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
 	vcpu_put(vcpu);
 
@@ -3751,14 +3767,14 @@ void fx_init(struct kvm_vcpu *vcpu)
 	 * allocate ram with GFP_KERNEL.
 	 */
 	if (!used_math())
-		fx_save(&vcpu->arch.host_fx_image);
+		kvm_fx_save(&vcpu->arch.host_fx_image);
 
 	/* Initialize guest FPU by resetting ours and saving into guest's */
 	preempt_disable();
-	fx_save(&vcpu->arch.host_fx_image);
-	fx_finit();
-	fx_save(&vcpu->arch.guest_fx_image);
-	fx_restore(&vcpu->arch.host_fx_image);
+	kvm_fx_save(&vcpu->arch.host_fx_image);
+	kvm_fx_finit();
+	kvm_fx_save(&vcpu->arch.guest_fx_image);
+	kvm_fx_restore(&vcpu->arch.host_fx_image);
 	preempt_enable();
 
 	vcpu->arch.cr0 |= X86_CR0_ET;
@@ -3775,8 +3791,8 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 		return;
 
 	vcpu->guest_fpu_loaded = 1;
-	fx_save(&vcpu->arch.host_fx_image);
-	fx_restore(&vcpu->arch.guest_fx_image);
+	kvm_fx_save(&vcpu->arch.host_fx_image);
+	kvm_fx_restore(&vcpu->arch.guest_fx_image);
 }
 EXPORT_SYMBOL_GPL(kvm_load_guest_fpu);
 
@@ -3786,8 +3802,8 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 		return;
 
 	vcpu->guest_fpu_loaded = 0;
-	fx_save(&vcpu->arch.guest_fx_image);
-	fx_restore(&vcpu->arch.host_fx_image);
+	kvm_fx_save(&vcpu->arch.guest_fx_image);
+	kvm_fx_restore(&vcpu->arch.host_fx_image);
 	++vcpu->stat.fpu_reload;
 }
 EXPORT_SYMBOL_GPL(kvm_put_guest_fpu);
@@ -4016,6 +4032,11 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+	kvm_mmu_zap_all(kvm);
+}
+
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE
@@ -4044,6 +4065,6 @@ void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 	 * So need not to call smp_call_function_single() in that case.
 	 */
 	if (vcpu->guest_mode && vcpu->cpu != cpu)
-		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0, 0);
+		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
 	put_cpu();
 }
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 932f216d890c..f2f90468f8b1 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -121,7 +121,7 @@ static u16 opcode_table[256] = {
 	0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
 	0, 0, 0, 0,
 	/* 0x68 - 0x6F */
-	0, 0, ImplicitOps | Mov | Stack, 0,
+	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
 	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
 	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
 	/* 0x70 - 0x77 */
@@ -138,9 +138,11 @@ static u16 opcode_table[256] = {
 	/* 0x88 - 0x8F */
 	ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
 	ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	0, ModRM | DstReg, 0, Group | Group1A,
-	/* 0x90 - 0x9F */
-	0, 0, 0, 0, 0, 0, 0, 0,
+	DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
+	DstReg | SrcMem | ModRM | Mov, Group | Group1A,
+	/* 0x90 - 0x97 */
+	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
+	/* 0x98 - 0x9F */
 	0, 0, 0, 0, ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
 	/* 0xA0 - 0xA7 */
 	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
@@ -152,7 +154,8 @@ static u16 opcode_table[256] = {
 	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
 	ByteOp | ImplicitOps | String, ImplicitOps | String,
 	/* 0xB0 - 0xBF */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	DstReg | SrcImm | Mov, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xC0 - 0xC7 */
 	ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
 	0, ImplicitOps | Stack, 0, 0,
@@ -168,7 +171,8 @@ static u16 opcode_table[256] = {
 	/* 0xE0 - 0xE7 */
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xE8 - 0xEF */
-	ImplicitOps | Stack, SrcImm|ImplicitOps, 0, SrcImmByte|ImplicitOps,
+	ImplicitOps | Stack, SrcImm | ImplicitOps,
+	ImplicitOps, SrcImmByte | ImplicitOps,
 	0, 0, 0, 0,
 	/* 0xF0 - 0xF7 */
 	0, 0, 0, 0,
@@ -215,7 +219,7 @@ static u16 twobyte_table[256] = {
 	/* 0xA0 - 0xA7 */
 	0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
 	/* 0xA8 - 0xAF */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
+	0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, ModRM, 0,
 	/* 0xB0 - 0xB7 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
 	    DstMem | SrcReg | ModRM | BitOp,
@@ -518,6 +522,39 @@ static inline void jmp_rel(struct decode_cache *c, int rel)
 	register_address_increment(c, &c->eip, rel);
 }
 
+static void set_seg_override(struct decode_cache *c, int seg)
+{
+	c->has_seg_override = true;
+	c->seg_override = seg;
+}
+
+static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
+{
+	if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
+		return 0;
+
+	return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
+}
+
+static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
+				       struct decode_cache *c)
+{
+	if (!c->has_seg_override)
+		return 0;
+
+	return seg_base(ctxt, c->seg_override);
+}
+
+static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_ES);
+}
+
+static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_SS);
+}
+
 static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
 			      struct x86_emulate_ops *ops,
 			      unsigned long linear, u8 *dest)
@@ -660,7 +697,7 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 {
 	struct decode_cache *c = &ctxt->decode;
 	u8 sib;
-	int index_reg = 0, base_reg = 0, scale, rip_relative = 0;
+	int index_reg = 0, base_reg = 0, scale;
 	int rc = 0;
 
 	if (c->rex_prefix) {
@@ -731,47 +768,28 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 		}
 		if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
 		    (c->modrm_rm == 6 && c->modrm_mod != 0))
-			if (!c->override_base)
-				c->override_base = &ctxt->ss_base;
+			if (!c->has_seg_override)
+				set_seg_override(c, VCPU_SREG_SS);
 		c->modrm_ea = (u16)c->modrm_ea;
 	} else {
 		/* 32/64-bit ModR/M decode. */
-		switch (c->modrm_rm) {
-		case 4:
-		case 12:
+		if ((c->modrm_rm & 7) == 4) {
 			sib = insn_fetch(u8, 1, c->eip);
 			index_reg |= (sib >> 3) & 7;
 			base_reg |= sib & 7;
 			scale = sib >> 6;
 
-			switch (base_reg) {
-			case 5:
-				if (c->modrm_mod != 0)
-					c->modrm_ea += c->regs[base_reg];
-				else
-					c->modrm_ea +=
-						insn_fetch(s32, 4, c->eip);
-				break;
-			default:
+			if ((base_reg & 7) == 5 && c->modrm_mod == 0)
+				c->modrm_ea += insn_fetch(s32, 4, c->eip);
+			else
 				c->modrm_ea += c->regs[base_reg];
-			}
-			switch (index_reg) {
-			case 4:
-				break;
-			default:
+			if (index_reg != 4)
 				c->modrm_ea += c->regs[index_reg] << scale;
-			}
-			break;
-		case 5:
-			if (c->modrm_mod != 0)
-				c->modrm_ea += c->regs[c->modrm_rm];
-			else if (ctxt->mode == X86EMUL_MODE_PROT64)
-				rip_relative = 1;
-			break;
-		default:
+		} else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
+			if (ctxt->mode == X86EMUL_MODE_PROT64)
+				c->rip_relative = 1;
+		} else
 			c->modrm_ea += c->regs[c->modrm_rm];
-			break;
-		}
 		switch (c->modrm_mod) {
 		case 0:
 			if (c->modrm_rm == 5)
@@ -785,22 +803,6 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 			break;
 		}
 	}
-	if (rip_relative) {
-		c->modrm_ea += c->eip;
-		switch (c->d & SrcMask) {
-		case SrcImmByte:
-			c->modrm_ea += 1;
-			break;
-		case SrcImm:
-			if (c->d & ByteOp)
-				c->modrm_ea += 1;
-			else
-				if (c->op_bytes == 8)
-					c->modrm_ea += 4;
-				else
-					c->modrm_ea += c->op_bytes;
-		}
-	}
 done:
 	return rc;
 }
@@ -838,6 +840,7 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 
 	memset(c, 0, sizeof(struct decode_cache));
 	c->eip = ctxt->vcpu->arch.rip;
+	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
 	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
 
 	switch (mode) {
@@ -876,23 +879,15 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 				/* switch between 2/4 bytes */
 				c->ad_bytes = def_ad_bytes ^ 6;
 			break;
+		case 0x26:	/* ES override */
 		case 0x2e:	/* CS override */
-			c->override_base = &ctxt->cs_base;
-			break;
+		case 0x36:	/* SS override */
 		case 0x3e:	/* DS override */
-			c->override_base = &ctxt->ds_base;
-			break;
-		case 0x26:	/* ES override */
-			c->override_base = &ctxt->es_base;
+			set_seg_override(c, (c->b >> 3) & 3);
 			break;
 		case 0x64:	/* FS override */
-			c->override_base = &ctxt->fs_base;
-			break;
 		case 0x65:	/* GS override */
-			c->override_base = &ctxt->gs_base;
-			break;
-		case 0x36:	/* SS override */
-			c->override_base = &ctxt->ss_base;
+			set_seg_override(c, c->b & 7);
 			break;
 		case 0x40 ... 0x4f: /* REX */
 			if (mode != X86EMUL_MODE_PROT64)
@@ -964,15 +959,11 @@ done_prefixes:
 	if (rc)
 		goto done;
 
-	if (!c->override_base)
-		c->override_base = &ctxt->ds_base;
-	if (mode == X86EMUL_MODE_PROT64 &&
-	    c->override_base != &ctxt->fs_base &&
-	    c->override_base != &ctxt->gs_base)
-		c->override_base = NULL;
+	if (!c->has_seg_override)
+		set_seg_override(c, VCPU_SREG_DS);
 
-	if (c->override_base)
-		c->modrm_ea += *c->override_base;
+	if (!(!c->twobyte && c->b == 0x8d))
+		c->modrm_ea += seg_override_base(ctxt, c);
 
 	if (c->ad_bytes != 8)
 		c->modrm_ea = (u32)c->modrm_ea;
@@ -1049,6 +1040,7 @@ done_prefixes:
 		break;
 	case DstMem:
 		if ((c->d & ModRM) && c->modrm_mod == 3) {
+			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 			c->dst.type = OP_REG;
 			c->dst.val = c->dst.orig_val = c->modrm_val;
 			c->dst.ptr = c->modrm_ptr;
@@ -1058,6 +1050,9 @@ done_prefixes:
 		break;
 	}
 
+	if (c->rip_relative)
+		c->modrm_ea += c->eip;
+
 done:
 	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
 }
@@ -1070,7 +1065,7 @@ static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
 	c->dst.bytes = c->op_bytes;
 	c->dst.val = c->src.val;
 	register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
-	c->dst.ptr = (void *) register_address(c, ctxt->ss_base,
+	c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
 					       c->regs[VCPU_REGS_RSP]);
 }
 
@@ -1080,7 +1075,7 @@ static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
 	struct decode_cache *c = &ctxt->decode;
 	int rc;
 
-	rc = ops->read_std(register_address(c, ctxt->ss_base,
+	rc = ops->read_std(register_address(c, ss_base(ctxt),
 					    c->regs[VCPU_REGS_RSP]),
 			   &c->dst.val, c->dst.bytes, ctxt->vcpu);
 	if (rc != 0)
@@ -1402,11 +1397,11 @@ special_insn:
 		register_address_increment(c, &c->regs[VCPU_REGS_RSP],
 					   -c->op_bytes);
 		c->dst.ptr = (void *) register_address(
-			c, ctxt->ss_base, c->regs[VCPU_REGS_RSP]);
+			c, ss_base(ctxt), c->regs[VCPU_REGS_RSP]);
 		break;
 	case 0x58 ... 0x5f: /* pop reg */
 	pop_instruction:
-		if ((rc = ops->read_std(register_address(c, ctxt->ss_base,
+		if ((rc = ops->read_std(register_address(c, ss_base(ctxt),
 			c->regs[VCPU_REGS_RSP]), c->dst.ptr,
 			c->op_bytes, ctxt->vcpu)) != 0)
 			goto done;
@@ -1420,9 +1415,8 @@ special_insn:
 			goto cannot_emulate;
 		c->dst.val = (s32) c->src.val;
 		break;
+	case 0x68: /* push imm */
 	case 0x6a: /* push imm8 */
-		c->src.val = 0L;
-		c->src.val = insn_fetch(s8, 1, c->eip);
 		emulate_push(ctxt);
 		break;
 	case 0x6c:		/* insb */
@@ -1433,7 +1427,7 @@ special_insn:
 				c->rep_prefix ?
 				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
 				(ctxt->eflags & EFLG_DF),
-				register_address(c, ctxt->es_base,
+				register_address(c, es_base(ctxt),
 						 c->regs[VCPU_REGS_RDI]),
 				c->rep_prefix,
 				c->regs[VCPU_REGS_RDX]) == 0) {
@@ -1449,9 +1443,8 @@ special_insn:
 				c->rep_prefix ?
 				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
 				(ctxt->eflags & EFLG_DF),
-				register_address(c, c->override_base ?
-							*c->override_base :
-							ctxt->ds_base,
+					 register_address(c,
+					  seg_override_base(ctxt, c),
 						 c->regs[VCPU_REGS_RSI]),
 				c->rep_prefix,
 				c->regs[VCPU_REGS_RDX]) == 0) {
@@ -1490,6 +1483,7 @@ special_insn:
 		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0x86 ... 0x87:	/* xchg */
+	xchg:
 		/* Write back the register source. */
 		switch (c->dst.bytes) {
 		case 1:
@@ -1514,14 +1508,60 @@ special_insn:
 		break;
 	case 0x88 ... 0x8b:	/* mov */
 		goto mov;
+	case 0x8c: { /* mov r/m, sreg */
+		struct kvm_segment segreg;
+
+		if (c->modrm_reg <= 5)
+			kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
+		else {
+			printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
+			       c->modrm);
+			goto cannot_emulate;
+		}
+		c->dst.val = segreg.selector;
+		break;
+	}
 	case 0x8d: /* lea r16/r32, m */
 		c->dst.val = c->modrm_ea;
 		break;
+	case 0x8e: { /* mov seg, r/m16 */
+		uint16_t sel;
+		int type_bits;
+		int err;
+
+		sel = c->src.val;
+		if (c->modrm_reg <= 5) {
+			type_bits = (c->modrm_reg == 1) ? 9 : 1;
+			err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
+							  type_bits, c->modrm_reg);
+		} else {
+			printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
+					c->modrm);
+			goto cannot_emulate;
+		}
+
+		if (err < 0)
+			goto cannot_emulate;
+
+		c->dst.type = OP_NONE;  /* Disable writeback. */
+		break;
+	}
 	case 0x8f:		/* pop (sole member of Grp1a) */
 		rc = emulate_grp1a(ctxt, ops);
 		if (rc != 0)
 			goto done;
 		break;
+	case 0x90: /* nop / xchg r8,rax */
+		if (!(c->rex_prefix & 1)) { /* nop */
+			c->dst.type = OP_NONE;
+			break;
+		}
+	case 0x91 ... 0x97: /* xchg reg,rax */
+		c->src.type = c->dst.type = OP_REG;
+		c->src.bytes = c->dst.bytes = c->op_bytes;
+		c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
+		c->src.val = *(c->src.ptr);
+		goto xchg;
 	case 0x9c: /* pushf */
 		c->src.val =  (unsigned long) ctxt->eflags;
 		emulate_push(ctxt);
@@ -1540,11 +1580,10 @@ special_insn:
 		c->dst.type = OP_MEM;
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)register_address(c,
-						   ctxt->es_base,
+						   es_base(ctxt),
 						   c->regs[VCPU_REGS_RDI]);
 		if ((rc = ops->read_emulated(register_address(c,
-		      c->override_base ? *c->override_base :
-					ctxt->ds_base,
+					   seg_override_base(ctxt, c),
 					c->regs[VCPU_REGS_RSI]),
 					&c->dst.val,
 					c->dst.bytes, ctxt->vcpu)) != 0)
@@ -1560,8 +1599,7 @@ special_insn:
 		c->src.type = OP_NONE; /* Disable writeback. */
 		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->src.ptr = (unsigned long *)register_address(c,
-				c->override_base ? *c->override_base :
-						   ctxt->ds_base,
+				       seg_override_base(ctxt, c),
 						   c->regs[VCPU_REGS_RSI]);
 		if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
 						&c->src.val,
@@ -1572,7 +1610,7 @@ special_insn:
 		c->dst.type = OP_NONE; /* Disable writeback. */
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)register_address(c,
-						   ctxt->es_base,
+						   es_base(ctxt),
 						   c->regs[VCPU_REGS_RDI]);
 		if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
 						&c->dst.val,
@@ -1596,7 +1634,7 @@ special_insn:
 		c->dst.type = OP_MEM;
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)register_address(c,
-						   ctxt->es_base,
+						   es_base(ctxt),
 						   c->regs[VCPU_REGS_RDI]);
 		c->dst.val = c->regs[VCPU_REGS_RAX];
 		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
@@ -1608,8 +1646,7 @@ special_insn:
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
 		if ((rc = ops->read_emulated(register_address(c,
-				c->override_base ? *c->override_base :
-						   ctxt->ds_base,
+						 seg_override_base(ctxt, c),
 						 c->regs[VCPU_REGS_RSI]),
 						 &c->dst.val,
 						 c->dst.bytes,
@@ -1622,6 +1659,8 @@ special_insn:
 	case 0xae ... 0xaf:	/* scas */
 		DPRINTF("Urk! I don't handle SCAS.\n");
 		goto cannot_emulate;
+	case 0xb8: /* mov r, imm */
+		goto mov;
 	case 0xc0 ... 0xc1:
 		emulate_grp2(ctxt);
 		break;
@@ -1660,13 +1699,39 @@ special_insn:
 		break;
 	}
 	case 0xe9: /* jmp rel */
-	case 0xeb: /* jmp rel short */
+		goto jmp;
+	case 0xea: /* jmp far */ {
+		uint32_t eip;
+		uint16_t sel;
+
+		switch (c->op_bytes) {
+		case 2:
+			eip = insn_fetch(u16, 2, c->eip);
+			break;
+		case 4:
+			eip = insn_fetch(u32, 4, c->eip);
+			break;
+		default:
+			DPRINTF("jmp far: Invalid op_bytes\n");
+			goto cannot_emulate;
+		}
+		sel = insn_fetch(u16, 2, c->eip);
+		if (kvm_load_segment_descriptor(ctxt->vcpu, sel, 9, VCPU_SREG_CS) < 0) {
+			DPRINTF("jmp far: Failed to load CS descriptor\n");
+			goto cannot_emulate;
+		}
+
+		c->eip = eip;
+		break;
+	}
+	case 0xeb:
+	      jmp:		/* jmp rel short */
 		jmp_rel(c, c->src.val);
 		c->dst.type = OP_NONE; /* Disable writeback. */
 		break;
 	case 0xf4:              /* hlt */
 		ctxt->vcpu->arch.halt_request = 1;
-		goto done;
+		break;
 	case 0xf5:	/* cmc */
 		/* complement carry flag from eflags reg */
 		ctxt->eflags ^= EFLG_CF;
@@ -1882,6 +1947,8 @@ twobyte_insn:
 		c->src.val &= (c->dst.bytes << 3) - 1;
 		emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0xae:              /* clflush */
+		break;
 	case 0xb0 ... 0xb1:	/* cmpxchg */
 		/*
 		 * Save real source value, then compare EAX against
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 964dfa36d367..c70e12b1a637 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -3,7 +3,7 @@ config LGUEST_GUEST
 	select PARAVIRT
 	depends on X86_32
 	depends on !X86_PAE
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 5c7e2fd52075..0313a5eec412 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -607,7 +607,7 @@ static unsigned long lguest_get_wallclock(void)
  * what speed it runs at, or 0 if it's unusable as a reliable clock source.
  * This matches what we want here: if we return 0 from this function, the x86
  * TSC clock will give up and not register itself. */
-static unsigned long lguest_cpu_khz(void)
+static unsigned long lguest_tsc_khz(void)
 {
 	return lguest_data.tsc_khz;
 }
@@ -835,7 +835,7 @@ static __init char *lguest_memory_setup(void)
 
 	/* The Linux bootloader header contains an "e820" memory map: the
 	 * Launcher populated the first entry with our memory limit. */
-	add_memory_region(boot_params.e820_map[0].addr,
+	e820_add_region(boot_params.e820_map[0].addr,
 			  boot_params.e820_map[0].size,
 			  boot_params.e820_map[0].type);
 
@@ -991,14 +991,13 @@ __init void lguest_init(void)
 #ifdef CONFIG_X86_LOCAL_APIC
 	/* apic read/write intercepts */
 	pv_apic_ops.apic_write = lguest_apic_write;
-	pv_apic_ops.apic_write_atomic = lguest_apic_write;
 	pv_apic_ops.apic_read = lguest_apic_read;
 #endif
 
 	/* time operations */
 	pv_time_ops.get_wallclock = lguest_get_wallclock;
 	pv_time_ops.time_init = lguest_time_init;
-	pv_time_ops.get_cpu_khz = lguest_cpu_khz;
+	pv_time_ops.get_tsc_khz = lguest_tsc_khz;
 
 	/* Now is a good time to look at the implementations of these functions
 	 * before returning to the rest of lguest_init(). */
@@ -1012,6 +1011,7 @@ __init void lguest_init(void)
 	 * clobbered.  The Launcher places our initial pagetables somewhere at
 	 * the top of our physical memory, so we don't need extra space: set
 	 * init_pg_tables_end to the end of the kernel. */
+	init_pg_tables_start = __pa(pg0);
 	init_pg_tables_end = __pa(pg0);
 
 	/* Load the %fs segment register (the per-cpu segment register) with
@@ -1065,9 +1065,9 @@ __init void lguest_init(void)
 	pm_power_off = lguest_power_off;
 	machine_ops.restart = lguest_restart;
 
-	/* Now we're set up, call start_kernel() in init/main.c and we proceed
+	/* Now we're set up, call i386_start_kernel() in head32.c and we proceed
 	 * to boot as normal.  It never returns. */
-	start_kernel();
+	i386_start_kernel();
 }
 /*
  * This marks the end of stage II of our journey, The Guest.
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 76f60f52a885..aa3fa4119424 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -4,8 +4,9 @@
 
 obj-$(CONFIG_SMP) := msr-on-cpu.o
 
-lib-y := delay_$(BITS).o
-lib-y += usercopy_$(BITS).o getuser_$(BITS).o putuser_$(BITS).o
+lib-y := delay.o
+lib-y += thunk_$(BITS).o
+lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
 
 ifeq ($(CONFIG_X86_32),y)
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index ee1c3f635157..dfdf428975c0 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -1,8 +1,10 @@
-/* Copyright 2002 Andi Kleen, SuSE Labs.
+/*
+ * Copyright 2008 Vitaly Mayatskikh <vmayatsk@redhat.com>
+ * Copyright 2002 Andi Kleen, SuSE Labs.
  * Subject to the GNU Public License v2.
- * 
- * Functions to copy from and to user space.		
- */		 
+ *
+ * Functions to copy from and to user space.
+ */
 
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
@@ -20,60 +22,88 @@
 	.long \orig-1f	/* by default jump to orig */
 1:
 	.section .altinstr_replacement,"ax"
-2:	.byte 0xe9	             /* near jump with 32bit immediate */
+2:	.byte 0xe9			/* near jump with 32bit immediate */
 	.long \alt-1b /* offset */   /* or alternatively to alt */
 	.previous
 	.section .altinstructions,"a"
 	.align 8
 	.quad  0b
 	.quad  2b
-	.byte  \feature		     /* when feature is set */
+	.byte  \feature			/* when feature is set */
 	.byte  5
 	.byte  5
 	.previous
 	.endm
 
-/* Standard copy_to_user with segment limit checking */		
+	.macro ALIGN_DESTINATION
+#ifdef FIX_ALIGNMENT
+	/* check for bad alignment of destination */
+	movl %edi,%ecx
+	andl $7,%ecx
+	jz 102f				/* already aligned */
+	subl $8,%ecx
+	negl %ecx
+	subl %ecx,%edx
+100:	movb (%rsi),%al
+101:	movb %al,(%rdi)
+	incq %rsi
+	incq %rdi
+	decl %ecx
+	jnz 100b
+102:
+	.section .fixup,"ax"
+103:	addl %r8d,%edx			/* ecx is zerorest also */
+	jmp copy_user_handle_tail
+	.previous
+
+	.section __ex_table,"a"
+	.align 8
+	.quad 100b,103b
+	.quad 101b,103b
+	.previous
+#endif
+	.endm
+
+/* Standard copy_to_user with segment limit checking */
 ENTRY(copy_to_user)
 	CFI_STARTPROC
 	GET_THREAD_INFO(%rax)
 	movq %rdi,%rcx
 	addq %rdx,%rcx
-	jc  bad_to_user
-	cmpq threadinfo_addr_limit(%rax),%rcx
+	jc bad_to_user
+	cmpq TI_addr_limit(%rax),%rcx
 	jae bad_to_user
-	xorl %eax,%eax	/* clear zero flag */
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
 
-ENTRY(copy_user_generic)
+/* Standard copy_from_user with segment limit checking */
+ENTRY(copy_from_user)
 	CFI_STARTPROC
-	movl $1,%ecx	/* set zero flag */
+	GET_THREAD_INFO(%rax)
+	movq %rsi,%rcx
+	addq %rdx,%rcx
+	jc bad_from_user
+	cmpq TI_addr_limit(%rax),%rcx
+	jae bad_from_user
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
+ENDPROC(copy_from_user)
 
-ENTRY(__copy_from_user_inatomic)
+ENTRY(copy_user_generic)
 	CFI_STARTPROC
-	xorl %ecx,%ecx	/* clear zero flag */
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
+ENDPROC(copy_user_generic)
 
-/* Standard copy_from_user with segment limit checking */	
-ENTRY(copy_from_user)
+ENTRY(__copy_from_user_inatomic)
 	CFI_STARTPROC
-	GET_THREAD_INFO(%rax)
-	movq %rsi,%rcx
-	addq %rdx,%rcx
-	jc  bad_from_user
-	cmpq threadinfo_addr_limit(%rax),%rcx
-	jae  bad_from_user
-	movl $1,%ecx	/* set zero flag */
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
-ENDPROC(copy_from_user)
-	
+ENDPROC(__copy_from_user_inatomic)
+
 	.section .fixup,"ax"
 	/* must zero dest */
+ENTRY(bad_from_user)
 bad_from_user:
 	CFI_STARTPROC
 	movl %edx,%ecx
@@ -81,271 +111,158 @@ bad_from_user:
 	rep
 	stosb
 bad_to_user:
-	movl	%edx,%eax
+	movl %edx,%eax
 	ret
 	CFI_ENDPROC
-END(bad_from_user)
+ENDPROC(bad_from_user)
 	.previous
-	
-		
+
 /*
  * copy_user_generic_unrolled - memory copy with exception handling.
- * This version is for CPUs like P4 that don't have efficient micro code for rep movsq
- * 	
- * Input:	
+ * This version is for CPUs like P4 that don't have efficient micro
+ * code for rep movsq
+ *
+ * Input:
  * rdi destination
  * rsi source
  * rdx count
- * ecx zero flag -- if true zero destination on error
  *
- * Output:		
- * eax uncopied bytes or 0 if successful.
+ * Output:
+ * eax uncopied bytes or 0 if successfull.
  */
 ENTRY(copy_user_generic_unrolled)
 	CFI_STARTPROC
-	pushq %rbx
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rbx, 0
-	pushq %rcx
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rcx, 0
-	xorl %eax,%eax		/*zero for the exception handler */
-
-#ifdef FIX_ALIGNMENT
-	/* check for bad alignment of destination */
-	movl %edi,%ecx
-	andl $7,%ecx
-	jnz  .Lbad_alignment
-.Lafter_bad_alignment:
-#endif
-
-	movq %rdx,%rcx
-
-	movl $64,%ebx
-	shrq $6,%rdx
-	decq %rdx
-	js   .Lhandle_tail
-
-	.p2align 4
-.Lloop:
-.Ls1:	movq (%rsi),%r11
-.Ls2:	movq 1*8(%rsi),%r8
-.Ls3:	movq 2*8(%rsi),%r9
-.Ls4:	movq 3*8(%rsi),%r10
-.Ld1:	movq %r11,(%rdi)
-.Ld2:	movq %r8,1*8(%rdi)
-.Ld3:	movq %r9,2*8(%rdi)
-.Ld4:	movq %r10,3*8(%rdi)
-
-.Ls5:	movq 4*8(%rsi),%r11
-.Ls6:	movq 5*8(%rsi),%r8
-.Ls7:	movq 6*8(%rsi),%r9
-.Ls8:	movq 7*8(%rsi),%r10
-.Ld5:	movq %r11,4*8(%rdi)
-.Ld6:	movq %r8,5*8(%rdi)
-.Ld7:	movq %r9,6*8(%rdi)
-.Ld8:	movq %r10,7*8(%rdi)
-
-	decq %rdx
-
+	cmpl $8,%edx
+	jb 20f		/* less then 8 bytes, go to byte copy loop */
+	ALIGN_DESTINATION
+	movl %edx,%ecx
+	andl $63,%edx
+	shrl $6,%ecx
+	jz 17f
+1:	movq (%rsi),%r8
+2:	movq 1*8(%rsi),%r9
+3:	movq 2*8(%rsi),%r10
+4:	movq 3*8(%rsi),%r11
+5:	movq %r8,(%rdi)
+6:	movq %r9,1*8(%rdi)
+7:	movq %r10,2*8(%rdi)
+8:	movq %r11,3*8(%rdi)
+9:	movq 4*8(%rsi),%r8
+10:	movq 5*8(%rsi),%r9
+11:	movq 6*8(%rsi),%r10
+12:	movq 7*8(%rsi),%r11
+13:	movq %r8,4*8(%rdi)
+14:	movq %r9,5*8(%rdi)
+15:	movq %r10,6*8(%rdi)
+16:	movq %r11,7*8(%rdi)
 	leaq 64(%rsi),%rsi
 	leaq 64(%rdi),%rdi
-
-	jns  .Lloop
-
-	.p2align 4
-.Lhandle_tail:
-	movl %ecx,%edx
-	andl $63,%ecx
-	shrl $3,%ecx
-	jz   .Lhandle_7
-	movl $8,%ebx
-	.p2align 4
-.Lloop_8:
-.Ls9:	movq (%rsi),%r8
-.Ld9:	movq %r8,(%rdi)
 	decl %ecx
-	leaq 8(%rdi),%rdi
+	jnz 1b
+17:	movl %edx,%ecx
+	andl $7,%edx
+	shrl $3,%ecx
+	jz 20f
+18:	movq (%rsi),%r8
+19:	movq %r8,(%rdi)
 	leaq 8(%rsi),%rsi
-	jnz .Lloop_8
-
-.Lhandle_7:
+	leaq 8(%rdi),%rdi
+	decl %ecx
+	jnz 18b
+20:	andl %edx,%edx
+	jz 23f
 	movl %edx,%ecx
-	andl $7,%ecx
-	jz   .Lende
-	.p2align 4
-.Lloop_1:
-.Ls10:	movb (%rsi),%bl
-.Ld10:	movb %bl,(%rdi)
-	incq %rdi
+21:	movb (%rsi),%al
+22:	movb %al,(%rdi)
 	incq %rsi
+	incq %rdi
 	decl %ecx
-	jnz .Lloop_1
-
-	CFI_REMEMBER_STATE
-.Lende:
-	popq %rcx
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_RESTORE rcx
-	popq %rbx
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_RESTORE rbx
+	jnz 21b
+23:	xor %eax,%eax
 	ret
-	CFI_RESTORE_STATE
 
-#ifdef FIX_ALIGNMENT
-	/* align destination */
-	.p2align 4
-.Lbad_alignment:
-	movl $8,%r9d
-	subl %ecx,%r9d
-	movl %r9d,%ecx
-	cmpq %r9,%rdx
-	jz   .Lhandle_7
-	js   .Lhandle_7
-.Lalign_1:
-.Ls11:	movb (%rsi),%bl
-.Ld11:	movb %bl,(%rdi)
-	incq %rsi
-	incq %rdi
-	decl %ecx
-	jnz .Lalign_1
-	subq %r9,%rdx
-	jmp .Lafter_bad_alignment
-#endif
+	.section .fixup,"ax"
+30:	shll $6,%ecx
+	addl %ecx,%edx
+	jmp 60f
+40:	lea (%rdx,%rcx,8),%rdx
+	jmp 60f
+50:	movl %ecx,%edx
+60:	jmp copy_user_handle_tail /* ecx is zerorest also */
+	.previous
 
-	/* table sorted by exception address */
 	.section __ex_table,"a"
 	.align 8
-	.quad .Ls1,.Ls1e	/* Ls1-Ls4 have copied zero bytes */
-	.quad .Ls2,.Ls1e
-	.quad .Ls3,.Ls1e
-	.quad .Ls4,.Ls1e
-	.quad .Ld1,.Ls1e	/* Ld1-Ld4 have copied 0-24 bytes */
-	.quad .Ld2,.Ls2e
-	.quad .Ld3,.Ls3e
-	.quad .Ld4,.Ls4e
-	.quad .Ls5,.Ls5e	/* Ls5-Ls8 have copied 32 bytes */
-	.quad .Ls6,.Ls5e
-	.quad .Ls7,.Ls5e
-	.quad .Ls8,.Ls5e
-	.quad .Ld5,.Ls5e	/* Ld5-Ld8 have copied 32-56 bytes */
-	.quad .Ld6,.Ls6e
-	.quad .Ld7,.Ls7e
-	.quad .Ld8,.Ls8e
-	.quad .Ls9,.Le_quad
-	.quad .Ld9,.Le_quad
-	.quad .Ls10,.Le_byte
-	.quad .Ld10,.Le_byte
-#ifdef FIX_ALIGNMENT
-	.quad .Ls11,.Lzero_rest
-	.quad .Ld11,.Lzero_rest
-#endif
-	.quad .Le5,.Le_zero
+	.quad 1b,30b
+	.quad 2b,30b
+	.quad 3b,30b
+	.quad 4b,30b
+	.quad 5b,30b
+	.quad 6b,30b
+	.quad 7b,30b
+	.quad 8b,30b
+	.quad 9b,30b
+	.quad 10b,30b
+	.quad 11b,30b
+	.quad 12b,30b
+	.quad 13b,30b
+	.quad 14b,30b
+	.quad 15b,30b
+	.quad 16b,30b
+	.quad 18b,40b
+	.quad 19b,40b
+	.quad 21b,50b
+	.quad 22b,50b
 	.previous
-
-	/* eax: zero, ebx: 64 */
-.Ls1e: 	addl $8,%eax		/* eax is bytes left uncopied within the loop (Ls1e: 64 .. Ls8e: 8) */
-.Ls2e: 	addl $8,%eax
-.Ls3e: 	addl $8,%eax
-.Ls4e: 	addl $8,%eax
-.Ls5e: 	addl $8,%eax
-.Ls6e: 	addl $8,%eax
-.Ls7e: 	addl $8,%eax
-.Ls8e: 	addl $8,%eax
-	addq %rbx,%rdi	/* +64 */
-	subq %rax,%rdi  /* correct destination with computed offset */
-
-	shlq $6,%rdx	/* loop counter * 64 (stride length) */
-	addq %rax,%rdx	/* add offset to loopcnt */
-	andl $63,%ecx	/* remaining bytes */
-	addq %rcx,%rdx	/* add them */
-	jmp .Lzero_rest
-
-	/* exception on quad word loop in tail handling */
-	/* ecx:	loopcnt/8, %edx: length, rdi: correct */
-.Le_quad:
-	shll $3,%ecx
-	andl $7,%edx
-	addl %ecx,%edx
-	/* edx: bytes to zero, rdi: dest, eax:zero */
-.Lzero_rest:
-	cmpl $0,(%rsp)
-	jz   .Le_zero
-	movq %rdx,%rcx
-.Le_byte:
-	xorl %eax,%eax
-.Le5:	rep
-	stosb
-	/* when there is another exception while zeroing the rest just return */
-.Le_zero:
-	movq %rdx,%rax
-	jmp .Lende
 	CFI_ENDPROC
-ENDPROC(copy_user_generic)
+ENDPROC(copy_user_generic_unrolled)
 
-
-	/* Some CPUs run faster using the string copy instructions.
-	   This is also a lot simpler. Use them when possible.
-	   Patch in jmps to this code instead of copying it fully
-	   to avoid unwanted aliasing in the exception tables. */
-
- /* rdi	destination
-  * rsi source
-  * rdx count
-  * ecx zero flag
-  *
-  * Output:
-  * eax uncopied bytes or 0 if successfull.
-  *
-  * Only 4GB of copy is supported. This shouldn't be a problem
-  * because the kernel normally only writes from/to page sized chunks
-  * even if user space passed a longer buffer.
-  * And more would be dangerous because both Intel and AMD have
-  * errata with rep movsq > 4GB. If someone feels the need to fix
-  * this please consider this.
-  */
+/* Some CPUs run faster using the string copy instructions.
+ * This is also a lot simpler. Use them when possible.
+ *
+ * Only 4GB of copy is supported. This shouldn't be a problem
+ * because the kernel normally only writes from/to page sized chunks
+ * even if user space passed a longer buffer.
+ * And more would be dangerous because both Intel and AMD have
+ * errata with rep movsq > 4GB. If someone feels the need to fix
+ * this please consider this.
+ *
+ * Input:
+ * rdi destination
+ * rsi source
+ * rdx count
+ *
+ * Output:
+ * eax uncopied bytes or 0 if successful.
+ */
 ENTRY(copy_user_generic_string)
 	CFI_STARTPROC
-	movl %ecx,%r8d		/* save zero flag */
+	andl %edx,%edx
+	jz 4f
+	cmpl $8,%edx
+	jb 2f		/* less than 8 bytes, go to byte copy loop */
+	ALIGN_DESTINATION
 	movl %edx,%ecx
 	shrl $3,%ecx
-	andl $7,%edx	
-	jz   10f
-1:	rep 
-	movsq 
-	movl %edx,%ecx
-2:	rep
-	movsb
-9:	movl %ecx,%eax
-	ret
-
-	/* multiple of 8 byte */
-10:	rep
+	andl $7,%edx
+1:	rep
 	movsq
-	xor %eax,%eax
+2:	movl %edx,%ecx
+3:	rep
+	movsb
+4:	xorl %eax,%eax
 	ret
 
-	/* exception handling */
-3:      lea (%rdx,%rcx,8),%rax	/* exception on quad loop */
-	jmp 6f
-5:	movl %ecx,%eax		/* exception on byte loop */
-	/* eax: left over bytes */
-6:	testl %r8d,%r8d		/* zero flag set? */
-	jz 7f
-	movl %eax,%ecx		/* initialize x86 loop counter */
-	push %rax
-	xorl %eax,%eax
-8:	rep
-	stosb 			/* zero the rest */
-11:	pop %rax
-7:	ret
-	CFI_ENDPROC
-END(copy_user_generic_c)
+	.section .fixup,"ax"
+11:	lea (%rdx,%rcx,8),%rcx
+12:	movl %ecx,%edx		/* ecx is zerorest also */
+	jmp copy_user_handle_tail
+	.previous
 
 	.section __ex_table,"a"
-	.quad 1b,3b
-	.quad 2b,5b
-	.quad 8b,11b
-	.quad 10b,3b
+	.align 8
+	.quad 1b,11b
+	.quad 3b,12b
 	.previous
+	CFI_ENDPROC
+ENDPROC(copy_user_generic_string)
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 9d3d1ab83763..40e0e309d27e 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -1,4 +1,6 @@
-/* Copyright 2002 Andi Kleen, SuSE Labs.
+/*
+ * Copyright 2008 Vitaly Mayatskikh <vmayatsk@redhat.com>
+ * Copyright 2002 Andi Kleen, SuSE Labs.
  * Subject to the GNU Public License v2.
  *
  * Functions to copy from and to user space.
@@ -12,204 +14,125 @@
 #include <asm/current.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpufeature.h>
-
-/*
- * copy_user_nocache - Uncached memory copy with exception handling
- * This will force destination/source out of cache for more performance.
- *
- * Input:
- * rdi destination
- * rsi source
- * rdx count
- * rcx zero flag	when 1 zero on exception
- *
- * Output:
- * eax uncopied bytes or 0 if successful.
- */
-ENTRY(__copy_user_nocache)
-	CFI_STARTPROC
-	pushq %rbx
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rbx, 0
-	pushq %rcx		/* save zero flag */
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rcx, 0
-
-	xorl %eax,%eax		/* zero for the exception handler */
 
+	.macro ALIGN_DESTINATION
 #ifdef FIX_ALIGNMENT
 	/* check for bad alignment of destination */
 	movl %edi,%ecx
 	andl $7,%ecx
-	jnz  .Lbad_alignment
-.Lafter_bad_alignment:
-#endif
-
-	movq %rdx,%rcx
-
-	movl $64,%ebx
-	shrq $6,%rdx
-	decq %rdx
-	js   .Lhandle_tail
-
-	.p2align 4
-.Lloop:
-.Ls1:	movq (%rsi),%r11
-.Ls2:	movq 1*8(%rsi),%r8
-.Ls3:	movq 2*8(%rsi),%r9
-.Ls4:	movq 3*8(%rsi),%r10
-.Ld1:	movnti %r11,(%rdi)
-.Ld2:	movnti %r8,1*8(%rdi)
-.Ld3:	movnti %r9,2*8(%rdi)
-.Ld4:	movnti %r10,3*8(%rdi)
-
-.Ls5:	movq 4*8(%rsi),%r11
-.Ls6:	movq 5*8(%rsi),%r8
-.Ls7:	movq 6*8(%rsi),%r9
-.Ls8:	movq 7*8(%rsi),%r10
-.Ld5:	movnti %r11,4*8(%rdi)
-.Ld6:	movnti %r8,5*8(%rdi)
-.Ld7:	movnti %r9,6*8(%rdi)
-.Ld8:	movnti %r10,7*8(%rdi)
+	jz 102f				/* already aligned */
+	subl $8,%ecx
+	negl %ecx
+	subl %ecx,%edx
+100:	movb (%rsi),%al
+101:	movb %al,(%rdi)
+	incq %rsi
+	incq %rdi
+	decl %ecx
+	jnz 100b
+102:
+	.section .fixup,"ax"
+103:	addl %r8d,%edx			/* ecx is zerorest also */
+	jmp copy_user_handle_tail
+	.previous
 
-	dec  %rdx
+	.section __ex_table,"a"
+	.align 8
+	.quad 100b,103b
+	.quad 101b,103b
+	.previous
+#endif
+	.endm
 
+/*
+ * copy_user_nocache - Uncached memory copy with exception handling
+ * This will force destination/source out of cache for more performance.
+ */
+ENTRY(__copy_user_nocache)
+	CFI_STARTPROC
+	cmpl $8,%edx
+	jb 20f		/* less then 8 bytes, go to byte copy loop */
+	ALIGN_DESTINATION
+	movl %edx,%ecx
+	andl $63,%edx
+	shrl $6,%ecx
+	jz 17f
+1:	movq (%rsi),%r8
+2:	movq 1*8(%rsi),%r9
+3:	movq 2*8(%rsi),%r10
+4:	movq 3*8(%rsi),%r11
+5:	movnti %r8,(%rdi)
+6:	movnti %r9,1*8(%rdi)
+7:	movnti %r10,2*8(%rdi)
+8:	movnti %r11,3*8(%rdi)
+9:	movq 4*8(%rsi),%r8
+10:	movq 5*8(%rsi),%r9
+11:	movq 6*8(%rsi),%r10
+12:	movq 7*8(%rsi),%r11
+13:	movnti %r8,4*8(%rdi)
+14:	movnti %r9,5*8(%rdi)
+15:	movnti %r10,6*8(%rdi)
+16:	movnti %r11,7*8(%rdi)
 	leaq 64(%rsi),%rsi
 	leaq 64(%rdi),%rdi
-
-	jns  .Lloop
-
-	.p2align 4
-.Lhandle_tail:
-	movl %ecx,%edx
-	andl $63,%ecx
-	shrl $3,%ecx
-	jz   .Lhandle_7
-	movl $8,%ebx
-	.p2align 4
-.Lloop_8:
-.Ls9:	movq (%rsi),%r8
-.Ld9:	movnti %r8,(%rdi)
 	decl %ecx
-	leaq 8(%rdi),%rdi
+	jnz 1b
+17:	movl %edx,%ecx
+	andl $7,%edx
+	shrl $3,%ecx
+	jz 20f
+18:	movq (%rsi),%r8
+19:	movnti %r8,(%rdi)
 	leaq 8(%rsi),%rsi
-	jnz .Lloop_8
-
-.Lhandle_7:
+	leaq 8(%rdi),%rdi
+	decl %ecx
+	jnz 18b
+20:	andl %edx,%edx
+	jz 23f
 	movl %edx,%ecx
-	andl $7,%ecx
-	jz   .Lende
-	.p2align 4
-.Lloop_1:
-.Ls10:	movb (%rsi),%bl
-.Ld10:	movb %bl,(%rdi)
-	incq %rdi
+21:	movb (%rsi),%al
+22:	movb %al,(%rdi)
 	incq %rsi
+	incq %rdi
 	decl %ecx
-	jnz .Lloop_1
-
-	CFI_REMEMBER_STATE
-.Lende:
-	popq %rcx
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_RESTORE %rcx
-	popq %rbx
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_RESTORE rbx
+	jnz 21b
+23:	xorl %eax,%eax
 	sfence
 	ret
-	CFI_RESTORE_STATE
 
-#ifdef FIX_ALIGNMENT
-	/* align destination */
-	.p2align 4
-.Lbad_alignment:
-	movl $8,%r9d
-	subl %ecx,%r9d
-	movl %r9d,%ecx
-	cmpq %r9,%rdx
-	jz   .Lhandle_7
-	js   .Lhandle_7
-.Lalign_1:
-.Ls11:	movb (%rsi),%bl
-.Ld11:	movb %bl,(%rdi)
-	incq %rsi
-	incq %rdi
-	decl %ecx
-	jnz .Lalign_1
-	subq %r9,%rdx
-	jmp .Lafter_bad_alignment
-#endif
+	.section .fixup,"ax"
+30:	shll $6,%ecx
+	addl %ecx,%edx
+	jmp 60f
+40:	lea (%rdx,%rcx,8),%rdx
+	jmp 60f
+50:	movl %ecx,%edx
+60:	sfence
+	movl %r8d,%ecx
+	jmp copy_user_handle_tail
+	.previous
 
-	/* table sorted by exception address */
 	.section __ex_table,"a"
-	.align 8
-	.quad .Ls1,.Ls1e	/* .Ls[1-4] - 0 bytes copied */
-	.quad .Ls2,.Ls1e
-	.quad .Ls3,.Ls1e
-	.quad .Ls4,.Ls1e
-	.quad .Ld1,.Ls1e	/* .Ld[1-4] - 0..24 bytes coped */
-	.quad .Ld2,.Ls2e
-	.quad .Ld3,.Ls3e
-	.quad .Ld4,.Ls4e
-	.quad .Ls5,.Ls5e	/* .Ls[5-8] - 32 bytes copied */
-	.quad .Ls6,.Ls5e
-	.quad .Ls7,.Ls5e
-	.quad .Ls8,.Ls5e
-	.quad .Ld5,.Ls5e	/* .Ld[5-8] - 32..56 bytes copied */
-	.quad .Ld6,.Ls6e
-	.quad .Ld7,.Ls7e
-	.quad .Ld8,.Ls8e
-	.quad .Ls9,.Le_quad
-	.quad .Ld9,.Le_quad
-	.quad .Ls10,.Le_byte
-	.quad .Ld10,.Le_byte
-#ifdef FIX_ALIGNMENT
-	.quad .Ls11,.Lzero_rest
-	.quad .Ld11,.Lzero_rest
-#endif
-	.quad .Le5,.Le_zero
+	.quad 1b,30b
+	.quad 2b,30b
+	.quad 3b,30b
+	.quad 4b,30b
+	.quad 5b,30b
+	.quad 6b,30b
+	.quad 7b,30b
+	.quad 8b,30b
+	.quad 9b,30b
+	.quad 10b,30b
+	.quad 11b,30b
+	.quad 12b,30b
+	.quad 13b,30b
+	.quad 14b,30b
+	.quad 15b,30b
+	.quad 16b,30b
+	.quad 18b,40b
+	.quad 19b,40b
+	.quad 21b,50b
+	.quad 22b,50b
 	.previous
-
-	/* eax: zero, ebx: 64 */
-.Ls1e: 	addl $8,%eax	/* eax: bytes left uncopied: Ls1e: 64 .. Ls8e: 8 */
-.Ls2e: 	addl $8,%eax
-.Ls3e: 	addl $8,%eax
-.Ls4e: 	addl $8,%eax
-.Ls5e: 	addl $8,%eax
-.Ls6e: 	addl $8,%eax
-.Ls7e: 	addl $8,%eax
-.Ls8e: 	addl $8,%eax
-	addq %rbx,%rdi	/* +64 */
-	subq %rax,%rdi  /* correct destination with computed offset */
-
-	shlq $6,%rdx	/* loop counter * 64 (stride length) */
-	addq %rax,%rdx	/* add offset to loopcnt */
-	andl $63,%ecx	/* remaining bytes */
-	addq %rcx,%rdx	/* add them */
-	jmp .Lzero_rest
-
-	/* exception on quad word loop in tail handling */
-	/* ecx:	loopcnt/8, %edx: length, rdi: correct */
-.Le_quad:
-	shll $3,%ecx
-	andl $7,%edx
-	addl %ecx,%edx
-	/* edx: bytes to zero, rdi: dest, eax:zero */
-.Lzero_rest:
-	cmpl $0,(%rsp)	/* zero flag set? */
-	jz   .Le_zero
-	movq %rdx,%rcx
-.Le_byte:
-	xorl %eax,%eax
-.Le5:	rep
-	stosb
-	/* when there is another exception while zeroing the rest just return */
-.Le_zero:
-	movq %rdx,%rax
-	jmp .Lende
 	CFI_ENDPROC
 ENDPROC(__copy_user_nocache)
-
-
diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay.c
index d710f2d167bb..f4568605d7d5 100644
--- a/arch/x86/lib/delay_32.c
+++ b/arch/x86/lib/delay.c
@@ -3,6 +3,7 @@
  *
  *	Copyright (C) 1993 Linus Torvalds
  *	Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *	Copyright (C) 2008 Jiri Hladky <hladky _dot_ jiri _at_ gmail _dot_ com>
  *
  *	The __delay function must _NOT_ be inlined as its execution time
  *	depends wildly on alignment on many x86 processors. The additional
@@ -28,16 +29,22 @@
 /* simple loop based delay: */
 static void delay_loop(unsigned long loops)
 {
-	int d0;
-
-	__asm__ __volatile__(
-		"\tjmp 1f\n"
-		".align 16\n"
-		"1:\tjmp 2f\n"
-		".align 16\n"
-		"2:\tdecl %0\n\tjns 2b"
-		:"=&a" (d0)
-		:"0" (loops));
+	asm volatile(
+		"	test %0,%0	\n"
+		"	jz 3f		\n"
+		"	jmp 1f		\n"
+
+		".align 16		\n"
+		"1:	jmp 2f		\n"
+
+		".align 16		\n"
+		"2:	dec %0		\n"
+		"	jnz 2b		\n"
+		"3:	dec %0		\n"
+
+		: /* we don't need output */
+		:"a" (loops)
+	);
 }
 
 /* TSC based delay: */
@@ -91,7 +98,7 @@ void use_tsc_delay(void)
 int __devinit read_current_timer(unsigned long *timer_val)
 {
 	if (delay_fn == delay_tsc) {
-		rdtscl(*timer_val);
+		rdtscll(*timer_val);
 		return 0;
 	}
 	return -1;
@@ -101,31 +108,30 @@ void __delay(unsigned long loops)
 {
 	delay_fn(loops);
 }
+EXPORT_SYMBOL(__delay);
 
 inline void __const_udelay(unsigned long xloops)
 {
 	int d0;
 
 	xloops *= 4;
-	__asm__("mull %0"
+	asm("mull %%edx"
 		:"=d" (xloops), "=&a" (d0)
 		:"1" (xloops), "0"
 		(cpu_data(raw_smp_processor_id()).loops_per_jiffy * (HZ/4)));
 
 	__delay(++xloops);
 }
+EXPORT_SYMBOL(__const_udelay);
 
 void __udelay(unsigned long usecs)
 {
 	__const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
 }
+EXPORT_SYMBOL(__udelay);
 
 void __ndelay(unsigned long nsecs)
 {
 	__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
 }
-
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(__const_udelay);
-EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c
deleted file mode 100644
index 4c441be92641..000000000000
--- a/arch/x86/lib/delay_64.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *	Precise Delay Loops for x86-64
- *
- *	Copyright (C) 1993 Linus Torvalds
- *	Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- *
- *	The __delay function must _NOT_ be inlined as its execution time
- *	depends wildly on alignment on many x86 processors. 
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/timex.h>
-#include <linux/preempt.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-
-#include <asm/delay.h>
-#include <asm/msr.h>
-
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
-
-int __devinit read_current_timer(unsigned long *timer_value)
-{
-	rdtscll(*timer_value);
-	return 0;
-}
-
-void __delay(unsigned long loops)
-{
-	unsigned bclock, now;
-	int cpu;
-
-	preempt_disable();
-	cpu = smp_processor_id();
-	rdtscl(bclock);
-	for (;;) {
-		rdtscl(now);
-		if ((now - bclock) >= loops)
-			break;
-
-		/* Allow RT tasks to run */
-		preempt_enable();
-		rep_nop();
-		preempt_disable();
-
-		/*
-		 * It is possible that we moved to another CPU, and
-		 * since TSC's are per-cpu we need to calculate
-		 * that. The delay must guarantee that we wait "at
-		 * least" the amount of time. Being moved to another
-		 * CPU could make the wait longer but we just need to
-		 * make sure we waited long enough. Rebalance the
-		 * counter for this CPU.
-		 */
-		if (unlikely(cpu != smp_processor_id())) {
-			loops -= (now - bclock);
-			cpu = smp_processor_id();
-			rdtscl(bclock);
-		}
-	}
-	preempt_enable();
-}
-EXPORT_SYMBOL(__delay);
-
-inline void __const_udelay(unsigned long xloops)
-{
-	__delay(((xloops * HZ *
-		cpu_data(raw_smp_processor_id()).loops_per_jiffy) >> 32) + 1);
-}
-EXPORT_SYMBOL(__const_udelay);
-
-void __udelay(unsigned long usecs)
-{
-	__const_udelay(usecs * 0x000010c7);  /* 2**32 / 1000000 (rounded up) */
-}
-EXPORT_SYMBOL(__udelay);
-
-void __ndelay(unsigned long nsecs)
-{
-	__const_udelay(nsecs * 0x00005);  /* 2**32 / 1000000000 (rounded up) */
-}
-EXPORT_SYMBOL(__ndelay);
diff --git a/arch/x86/lib/getuser_64.S b/arch/x86/lib/getuser.S
index 5448876261f8..ad374003742f 100644
--- a/arch/x86/lib/getuser_64.S
+++ b/arch/x86/lib/getuser.S
@@ -3,6 +3,7 @@
  *
  * (C) Copyright 1998 Linus Torvalds
  * (C) Copyright 2005 Andi Kleen
+ * (C) Copyright 2008 Glauber Costa
  *
  * These functions have a non-standard call interface
  * to make them more efficient, especially as they
@@ -13,14 +14,13 @@
 /*
  * __get_user_X
  *
- * Inputs:	%rcx contains the address.
+ * Inputs:	%[r|e]ax contains the address.
  *		The register is modified, but all changes are undone
  *		before returning because the C code doesn't know about it.
  *
- * Outputs:	%rax is error code (0 or -EFAULT)
- *		%rdx contains zero-extended value
- * 
- * %r8 is destroyed.
+ * Outputs:	%[r|e]ax is error code (0 or -EFAULT)
+ *		%[r|e]dx contains zero-extended value
+ *
  *
  * These functions should not modify any other registers,
  * as they get called from within inline assembly.
@@ -32,78 +32,73 @@
 #include <asm/errno.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
+#include <asm/asm.h>
 
 	.text
 ENTRY(__get_user_1)
 	CFI_STARTPROC
-	GET_THREAD_INFO(%r8)
-	cmpq threadinfo_addr_limit(%r8),%rcx
+	GET_THREAD_INFO(%_ASM_DX)
+	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
 	jae bad_get_user
-1:	movzb (%rcx),%edx
-	xorl %eax,%eax
+1:	movzb (%_ASM_AX),%edx
+	xor %eax,%eax
 	ret
 	CFI_ENDPROC
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
 	CFI_STARTPROC
-	GET_THREAD_INFO(%r8)
-	addq $1,%rcx
-	jc 20f
-	cmpq threadinfo_addr_limit(%r8),%rcx
-	jae 20f
-	decq   %rcx
-2:	movzwl (%rcx),%edx
-	xorl %eax,%eax
+	add $1,%_ASM_AX
+	jc bad_get_user
+	GET_THREAD_INFO(%_ASM_DX)
+	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
+	jae bad_get_user
+2:	movzwl -1(%_ASM_AX),%edx
+	xor %eax,%eax
 	ret
-20:	decq    %rcx
-	jmp	bad_get_user
 	CFI_ENDPROC
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
 	CFI_STARTPROC
-	GET_THREAD_INFO(%r8)
-	addq $3,%rcx
-	jc 30f
-	cmpq threadinfo_addr_limit(%r8),%rcx
-	jae 30f
-	subq $3,%rcx
-3:	movl (%rcx),%edx
-	xorl %eax,%eax
+	add $3,%_ASM_AX
+	jc bad_get_user
+	GET_THREAD_INFO(%_ASM_DX)
+	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
+	jae bad_get_user
+3:	mov -3(%_ASM_AX),%edx
+	xor %eax,%eax
 	ret
-30:	subq $3,%rcx
-	jmp bad_get_user
 	CFI_ENDPROC
 ENDPROC(__get_user_4)
 
+#ifdef CONFIG_X86_64
 ENTRY(__get_user_8)
 	CFI_STARTPROC
-	GET_THREAD_INFO(%r8)
-	addq $7,%rcx
-	jc 40f
-	cmpq threadinfo_addr_limit(%r8),%rcx
-	jae	40f
-	subq	$7,%rcx
-4:	movq (%rcx),%rdx
-	xorl %eax,%eax
+	add $7,%_ASM_AX
+	jc bad_get_user
+	GET_THREAD_INFO(%_ASM_DX)
+	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
+	jae	bad_get_user
+4:	movq -7(%_ASM_AX),%_ASM_DX
+	xor %eax,%eax
 	ret
-40:	subq $7,%rcx
-	jmp bad_get_user
 	CFI_ENDPROC
 ENDPROC(__get_user_8)
+#endif
 
 bad_get_user:
 	CFI_STARTPROC
-	xorl %edx,%edx
-	movq $(-EFAULT),%rax
+	xor %edx,%edx
+	mov $(-EFAULT),%_ASM_AX
 	ret
 	CFI_ENDPROC
 END(bad_get_user)
 
 .section __ex_table,"a"
-	.quad 1b,bad_get_user
-	.quad 2b,bad_get_user
-	.quad 3b,bad_get_user
-	.quad 4b,bad_get_user
-.previous
+	_ASM_PTR 1b,bad_get_user
+	_ASM_PTR 2b,bad_get_user
+	_ASM_PTR 3b,bad_get_user
+#ifdef CONFIG_X86_64
+	_ASM_PTR 4b,bad_get_user
+#endif
diff --git a/arch/x86/lib/getuser_32.S b/arch/x86/lib/getuser_32.S
deleted file mode 100644
index 6d84b53f12a2..000000000000
--- a/arch/x86/lib/getuser_32.S
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * __get_user functions.
- *
- * (C) Copyright 1998 Linus Torvalds
- *
- * These functions have a non-standard call interface
- * to make them more efficient, especially as they
- * return an error value in addition to the "real"
- * return value.
- */
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/thread_info.h>
-
-
-/*
- * __get_user_X
- *
- * Inputs:	%eax contains the address
- *
- * Outputs:	%eax is error code (0 or -EFAULT)
- *		%edx contains zero-extended value
- *
- * These functions should not modify any other registers,
- * as they get called from within inline assembly.
- */
-
-.text
-ENTRY(__get_user_1)
-	CFI_STARTPROC
-	GET_THREAD_INFO(%edx)
-	cmpl TI_addr_limit(%edx),%eax
-	jae bad_get_user
-1:	movzbl (%eax),%edx
-	xorl %eax,%eax
-	ret
-	CFI_ENDPROC
-ENDPROC(__get_user_1)
-
-ENTRY(__get_user_2)
-	CFI_STARTPROC
-	addl $1,%eax
-	jc bad_get_user
-	GET_THREAD_INFO(%edx)
-	cmpl TI_addr_limit(%edx),%eax
-	jae bad_get_user
-2:	movzwl -1(%eax),%edx
-	xorl %eax,%eax
-	ret
-	CFI_ENDPROC
-ENDPROC(__get_user_2)
-
-ENTRY(__get_user_4)
-	CFI_STARTPROC
-	addl $3,%eax
-	jc bad_get_user
-	GET_THREAD_INFO(%edx)
-	cmpl TI_addr_limit(%edx),%eax
-	jae bad_get_user
-3:	movl -3(%eax),%edx
-	xorl %eax,%eax
-	ret
-	CFI_ENDPROC
-ENDPROC(__get_user_4)
-
-bad_get_user:
-	CFI_STARTPROC
-	xorl %edx,%edx
-	movl $-14,%eax
-	ret
-	CFI_ENDPROC
-END(bad_get_user)
-
-.section __ex_table,"a"
-	.long 1b,bad_get_user
-	.long 2b,bad_get_user
-	.long 3b,bad_get_user
-.previous
diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c
index 57d043fa893e..d5a2b39f882b 100644
--- a/arch/x86/lib/msr-on-cpu.c
+++ b/arch/x86/lib/msr-on-cpu.c
@@ -30,10 +30,10 @@ static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe)
 
 	rv.msr_no = msr_no;
 	if (safe) {
-		smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 0, 1);
+		smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
 		err = rv.err;
 	} else {
-		smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 0, 1);
+		smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
 	}
 	*l = rv.l;
 	*h = rv.h;
@@ -64,10 +64,10 @@ static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe)
 	rv.l = l;
 	rv.h = h;
 	if (safe) {
-		smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 0, 1);
+		smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
 		err = rv.err;
 	} else {
-		smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 0, 1);
+		smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
 	}
 
 	return err;
diff --git a/arch/x86/lib/putuser_32.S b/arch/x86/lib/putuser.S
index f58fba109d18..36b0d15ae6e9 100644
--- a/arch/x86/lib/putuser_32.S
+++ b/arch/x86/lib/putuser.S
@@ -2,6 +2,8 @@
  * __put_user functions.
  *
  * (C) Copyright 2005 Linus Torvalds
+ * (C) Copyright 2005 Andi Kleen
+ * (C) Copyright 2008 Glauber Costa
  *
  * These functions have a non-standard call interface
  * to make them more efficient, especially as they
@@ -11,6 +13,8 @@
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
 #include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/asm.h>
 
 
 /*
@@ -26,73 +30,68 @@
  */
 
 #define ENTER	CFI_STARTPROC ; \
-		pushl %ebx ; \
-		CFI_ADJUST_CFA_OFFSET 4 ; \
-		CFI_REL_OFFSET ebx, 0 ; \
-		GET_THREAD_INFO(%ebx)
-#define EXIT	popl %ebx ; \
-		CFI_ADJUST_CFA_OFFSET -4 ; \
-		CFI_RESTORE ebx ; \
-		ret ; \
+		GET_THREAD_INFO(%_ASM_BX)
+#define EXIT	ret ; \
 		CFI_ENDPROC
 
 .text
 ENTRY(__put_user_1)
 	ENTER
-	cmpl TI_addr_limit(%ebx),%ecx
+	cmp TI_addr_limit(%_ASM_BX),%_ASM_CX
 	jae bad_put_user
-1:	movb %al,(%ecx)
-	xorl %eax,%eax
+1:	movb %al,(%_ASM_CX)
+	xor %eax,%eax
 	EXIT
 ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
 	ENTER
-	movl TI_addr_limit(%ebx),%ebx
-	subl $1,%ebx
-	cmpl %ebx,%ecx
+	mov TI_addr_limit(%_ASM_BX),%_ASM_BX
+	sub $1,%_ASM_BX
+	cmp %_ASM_BX,%_ASM_CX
 	jae bad_put_user
-2:	movw %ax,(%ecx)
-	xorl %eax,%eax
+2:	movw %ax,(%_ASM_CX)
+	xor %eax,%eax
 	EXIT
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
 	ENTER
-	movl TI_addr_limit(%ebx),%ebx
-	subl $3,%ebx
-	cmpl %ebx,%ecx
+	mov TI_addr_limit(%_ASM_BX),%_ASM_BX
+	sub $3,%_ASM_BX
+	cmp %_ASM_BX,%_ASM_CX
 	jae bad_put_user
-3:	movl %eax,(%ecx)
-	xorl %eax,%eax
+3:	movl %eax,(%_ASM_CX)
+	xor %eax,%eax
 	EXIT
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
 	ENTER
-	movl TI_addr_limit(%ebx),%ebx
-	subl $7,%ebx
-	cmpl %ebx,%ecx
+	mov TI_addr_limit(%_ASM_BX),%_ASM_BX
+	sub $7,%_ASM_BX
+	cmp %_ASM_BX,%_ASM_CX
 	jae bad_put_user
-4:	movl %eax,(%ecx)
-5:	movl %edx,4(%ecx)
-	xorl %eax,%eax
+4:	mov %_ASM_AX,(%_ASM_CX)
+#ifdef CONFIG_X86_32
+5:	movl %edx,4(%_ASM_CX)
+#endif
+	xor %eax,%eax
 	EXIT
 ENDPROC(__put_user_8)
 
 bad_put_user:
-	CFI_STARTPROC simple
-	CFI_DEF_CFA esp, 2*4
-	CFI_OFFSET eip, -1*4
-	CFI_OFFSET ebx, -2*4
-	movl $-14,%eax
+	CFI_STARTPROC
+	movl $-EFAULT,%eax
 	EXIT
 END(bad_put_user)
 
 .section __ex_table,"a"
-	.long 1b,bad_put_user
-	.long 2b,bad_put_user
-	.long 3b,bad_put_user
-	.long 4b,bad_put_user
-	.long 5b,bad_put_user
+	_ASM_PTR 1b,bad_put_user
+	_ASM_PTR 2b,bad_put_user
+	_ASM_PTR 3b,bad_put_user
+	_ASM_PTR 4b,bad_put_user
+#ifdef CONFIG_X86_32
+	_ASM_PTR 5b,bad_put_user
+#endif
 .previous
diff --git a/arch/x86/lib/putuser_64.S b/arch/x86/lib/putuser_64.S
deleted file mode 100644
index 4989f5a8fa9b..000000000000
--- a/arch/x86/lib/putuser_64.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * __put_user functions.
- *
- * (C) Copyright 1998 Linus Torvalds
- * (C) Copyright 2005 Andi Kleen
- *
- * These functions have a non-standard call interface
- * to make them more efficient, especially as they
- * return an error value in addition to the "real"
- * return value.
- */
-
-/*
- * __put_user_X
- *
- * Inputs:	%rcx contains the address
- *		%rdx contains new value
- *
- * Outputs:	%rax is error code (0 or -EFAULT)
- *
- * %r8 is destroyed.
- *
- * These functions should not modify any other registers,
- * as they get called from within inline assembly.
- */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/page.h>
-#include <asm/errno.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-
-	.text
-ENTRY(__put_user_1)
-	CFI_STARTPROC
-	GET_THREAD_INFO(%r8)
-	cmpq threadinfo_addr_limit(%r8),%rcx
-	jae bad_put_user
-1:	movb %dl,(%rcx)
-	xorl %eax,%eax
-	ret
-	CFI_ENDPROC
-ENDPROC(__put_user_1)
-
-ENTRY(__put_user_2)
-	CFI_STARTPROC
-	GET_THREAD_INFO(%r8)
-	addq $1,%rcx
-	jc 20f
-	cmpq threadinfo_addr_limit(%r8),%rcx
-	jae 20f
-	decq %rcx
-2:	movw %dx,(%rcx)
-	xorl %eax,%eax
-	ret
-20:	decq %rcx
-	jmp bad_put_user
-	CFI_ENDPROC
-ENDPROC(__put_user_2)
-
-ENTRY(__put_user_4)
-	CFI_STARTPROC
-	GET_THREAD_INFO(%r8)
-	addq $3,%rcx
-	jc 30f
-	cmpq threadinfo_addr_limit(%r8),%rcx
-	jae 30f
-	subq $3,%rcx
-3:	movl %edx,(%rcx)
-	xorl %eax,%eax
-	ret
-30:	subq $3,%rcx
-	jmp bad_put_user
-	CFI_ENDPROC
-ENDPROC(__put_user_4)
-
-ENTRY(__put_user_8)
-	CFI_STARTPROC
-	GET_THREAD_INFO(%r8)
-	addq $7,%rcx
-	jc 40f
-	cmpq threadinfo_addr_limit(%r8),%rcx
-	jae 40f
-	subq $7,%rcx
-4:	movq %rdx,(%rcx)
-	xorl %eax,%eax
-	ret
-40:	subq $7,%rcx
-	jmp bad_put_user
-	CFI_ENDPROC
-ENDPROC(__put_user_8)
-
-bad_put_user:
-	CFI_STARTPROC
-	movq $(-EFAULT),%rax
-	ret
-	CFI_ENDPROC
-END(bad_put_user)
-
-.section __ex_table,"a"
-	.quad 1b,bad_put_user
-	.quad 2b,bad_put_user
-	.quad 3b,bad_put_user
-	.quad 4b,bad_put_user
-.previous
diff --git a/arch/x86/lib/thunk_32.S b/arch/x86/lib/thunk_32.S
new file mode 100644
index 000000000000..650b11e00ecc
--- /dev/null
+++ b/arch/x86/lib/thunk_32.S
@@ -0,0 +1,47 @@
+/*
+ * Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash)
+ * Copyright 2008 by Steven Rostedt, Red Hat, Inc
+ *  (inspired by Andi Kleen's thunk_64.S)
+ * Subject to the GNU public license, v.2. No warranty of any kind.
+ */
+
+	#include <linux/linkage.h>
+
+#define ARCH_TRACE_IRQS_ON			\
+	pushl %eax;				\
+	pushl %ecx;				\
+	pushl %edx;				\
+	call trace_hardirqs_on;			\
+	popl %edx;				\
+	popl %ecx;				\
+	popl %eax;
+
+#define ARCH_TRACE_IRQS_OFF			\
+	pushl %eax;				\
+	pushl %ecx;				\
+	pushl %edx;				\
+	call trace_hardirqs_off;		\
+	popl %edx;				\
+	popl %ecx;				\
+	popl %eax;
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* put return address in eax (arg1) */
+	.macro thunk_ra name,func
+	.globl \name
+\name:
+	pushl %eax
+	pushl %ecx
+	pushl %edx
+	/* Place EIP in the arg1 */
+	movl 3*4(%esp), %eax
+	call \func
+	popl %edx
+	popl %ecx
+	popl %eax
+	ret
+	.endm
+
+	thunk_ra trace_hardirqs_on_thunk,trace_hardirqs_on_caller
+	thunk_ra trace_hardirqs_off_thunk,trace_hardirqs_off_caller
+#endif
diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/lib/thunk_64.S
index e009251d4e9f..bf9a7d5a5428 100644
--- a/arch/x86/lib/thunk_64.S
+++ b/arch/x86/lib/thunk_64.S
@@ -2,6 +2,7 @@
  * Save registers before calling assembly functions. This avoids
  * disturbance of register allocation in some inline assembly constructs.
  * Copyright 2001,2002 by Andi Kleen, SuSE Labs.
+ * Added trace_hardirqs callers - Copyright 2007 Steven Rostedt, Red Hat, Inc.
  * Subject to the GNU public license, v.2. No warranty of any kind.
  */
 
@@ -42,8 +43,22 @@
 #endif	
 	
 #ifdef CONFIG_TRACE_IRQFLAGS
-	thunk trace_hardirqs_on_thunk,trace_hardirqs_on
-	thunk trace_hardirqs_off_thunk,trace_hardirqs_off
+	/* put return address in rdi (arg1) */
+	.macro thunk_ra name,func
+	.globl \name
+\name:
+	CFI_STARTPROC
+	SAVE_ARGS
+	/* SAVE_ARGS pushs 9 elements */
+	/* the next element would be the rip */
+	movq 9*8(%rsp), %rdi
+	call \func
+	jmp  restore
+	CFI_ENDPROC
+	.endm
+
+	thunk_ra trace_hardirqs_on_thunk,trace_hardirqs_on_caller
+	thunk_ra trace_hardirqs_off_thunk,trace_hardirqs_off_caller
 #endif
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index 0c89d1bb0287..f4df6e7c718b 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -158,3 +158,26 @@ unsigned long copy_in_user(void __user *to, const void __user *from, unsigned le
 }
 EXPORT_SYMBOL(copy_in_user);
 
+/*
+ * Try to copy last bytes and clear the rest if needed.
+ * Since protection fault in copy_from/to_user is not a normal situation,
+ * it is not necessary to optimize tail handling.
+ */
+unsigned long
+copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest)
+{
+	char c;
+	unsigned zero_len;
+
+	for (; len; --len) {
+		if (__get_user_nocheck(c, from++, sizeof(char)))
+			break;
+		if (__put_user_nocheck(c, to++, sizeof(char)))
+			break;
+	}
+
+	for (c = 0, zero_len = len; zerorest && zero_len; --zero_len)
+		if (__put_user_nocheck(c, to++, sizeof(char)))
+			break;
+	return len;
+}
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 0c28a071824c..3d317836be9e 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -29,6 +29,10 @@ int no_broadcast=DEFAULT_SEND_IPI;
  **/
 void __init pre_intr_init_hook(void)
 {
+	if (x86_quirks->arch_pre_intr_init) {
+		if (x86_quirks->arch_pre_intr_init())
+			return;
+	}
 	init_ISA_irqs();
 }
 
@@ -52,6 +56,10 @@ static struct irqaction irq2 = {
  **/
 void __init intr_init_hook(void)
 {
+	if (x86_quirks->arch_intr_init) {
+		if (x86_quirks->arch_intr_init())
+			return;
+	}
 #ifdef CONFIG_X86_LOCAL_APIC
 	apic_intr_init();
 #endif
@@ -65,7 +73,7 @@ void __init intr_init_hook(void)
  *
  * Description:
  *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On VISWS
+ *	routines that may be needed before setup_arch() runs.  On Voyager
  *	this is used to get the board revision and type.
  **/
 void __init pre_setup_arch_hook(void)
@@ -81,6 +89,10 @@ void __init pre_setup_arch_hook(void)
  **/
 void __init trap_init_hook(void)
 {
+	if (x86_quirks->arch_trap_init) {
+		if (x86_quirks->arch_trap_init())
+			return;
+	}
 }
 
 static struct irqaction irq0  = {
@@ -91,6 +103,16 @@ static struct irqaction irq0  = {
 };
 
 /**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+	if (x86_quirks->arch_pre_time_init)
+		x86_quirks->arch_pre_time_init();
+}
+
+/**
  * time_init_hook - do any specific initialisations for the system timer.
  *
  * Description:
@@ -99,6 +121,16 @@ static struct irqaction irq0  = {
  **/
 void __init time_init_hook(void)
 {
+	if (x86_quirks->arch_time_init) {
+		/*
+		 * A nonzero return code does not mean failure, it means
+		 * that the architecture quirk does not want any
+		 * generic (timer) setup to be performed after this:
+		 */
+		if (x86_quirks->arch_time_init())
+			return;
+	}
+
 	irq0.mask = cpumask_of_cpu(0);
 	setup_irq(0, &irq0);
 }
@@ -142,45 +174,3 @@ static int __init print_ipi_mode(void)
 
 late_initcall(print_ipi_mode);
 
-/**
- * machine_specific_memory_setup - Hook for machine specific memory setup.
- *
- * Description:
- *	This is included late in kernel/setup.c so that it can make
- *	use of all of the static functions.
- **/
-
-char * __init machine_specific_memory_setup(void)
-{
-	char *who;
-
-
-	who = "BIOS-e820";
-
-	/*
-	 * Try to copy the BIOS-supplied E820-map.
-	 *
-	 * Otherwise fake a memory map; one section from 0k->640k,
-	 * the next section from 1mb->appropriate_mem_k
-	 */
-	sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries);
-	if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries)
-	    < 0) {
-		unsigned long mem_size;
-
-		/* compare results from other methods and take the greater */
-		if (boot_params.alt_mem_k
-		    < boot_params.screen_info.ext_mem_k) {
-			mem_size = boot_params.screen_info.ext_mem_k;
-			who = "BIOS-88";
-		} else {
-			mem_size = boot_params.alt_mem_k;
-			who = "BIOS-e801";
-		}
-
-		e820.nr_map = 0;
-		add_memory_region(0, LOWMEMSIZE(), E820_RAM);
-		add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
-  	}
-	return who;
-}
diff --git a/arch/x86/mach-es7000/Makefile b/arch/x86/mach-es7000/Makefile
index 69dd4da218dc..3ef8b43b62fc 100644
--- a/arch/x86/mach-es7000/Makefile
+++ b/arch/x86/mach-es7000/Makefile
@@ -3,4 +3,3 @@
 #
 
 obj-$(CONFIG_X86_ES7000)	:= es7000plat.o
-obj-$(CONFIG_X86_GENERICARCH)	:= es7000plat.o
diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c
index f5d6f7d8b86e..50189af14b85 100644
--- a/arch/x86/mach-es7000/es7000plat.c
+++ b/arch/x86/mach-es7000/es7000plat.c
@@ -52,6 +52,8 @@ static struct mip_reg		*host_reg;
 static int 			mip_port;
 static unsigned long		mip_addr, host_addr;
 
+int es7000_plat;
+
 /*
  * GSI override for ES7000 platforms.
  */
@@ -128,10 +130,10 @@ parse_unisys_oem (char *oemptr)
 			mip_addr = val;
 			mip = (struct mip_reg *)val;
 			mip_reg = __va(mip);
-			Dprintk("es7000_mipcfg: host_reg = 0x%lx \n",
-				(unsigned long)host_reg);
-			Dprintk("es7000_mipcfg: mip_reg = 0x%lx \n",
-				(unsigned long)mip_reg);
+			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+				 (unsigned long)host_reg);
+			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+				 (unsigned long)mip_reg);
 			success++;
 			break;
 		case MIP_PSAI_REG:
@@ -175,53 +177,6 @@ find_unisys_acpi_oem_table(unsigned long *oem_addr)
 }
 #endif
 
-/*
- * This file also gets compiled if CONFIG_X86_GENERICARCH is set. Generic
- * arch already has got following function definitions (asm-generic/es7000.c)
- * hence no need to define these for that case.
- */
-#ifndef CONFIG_X86_GENERICARCH
-void es7000_sw_apic(void);
-void __init enable_apic_mode(void)
-{
-	es7000_sw_apic();
-	return;
-}
-
-__init int mps_oem_check(struct mp_config_table *mpc, char *oem,
-		char *productid)
-{
-	if (mpc->mpc_oemptr) {
-		struct mp_config_oemtable *oem_table =
-			(struct mp_config_oemtable *)mpc->mpc_oemptr;
-		if (!strncmp(oem, "UNISYS", 6))
-			return parse_unisys_oem((char *)oem_table);
-	}
-	return 0;
-}
-#ifdef CONFIG_ACPI
-/* Hook from generic ACPI tables.c */
-int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	unsigned long oem_addr;
-	if (!find_unisys_acpi_oem_table(&oem_addr)) {
-		if (es7000_check_dsdt())
-			return parse_unisys_oem((char *)oem_addr);
-		else {
-			setup_unisys();
-			return 1;
-		}
-	}
-	return 0;
-}
-#else
-int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-#endif
-#endif /* COFIG_X86_GENERICARCH */
-
 static void
 es7000_spin(int n)
 {
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
index 19d6d407737b..0dbd7803a1d5 100644
--- a/arch/x86/mach-generic/Makefile
+++ b/arch/x86/mach-generic/Makefile
@@ -2,7 +2,11 @@
 # Makefile for the generic architecture
 #
 
-EXTRA_CFLAGS	:= -Iarch/x86/kernel
+EXTRA_CFLAGS			:= -Iarch/x86/kernel
 
-obj-y		:= probe.o summit.o bigsmp.o es7000.o default.o 
-obj-y		+= ../../x86/mach-es7000/
+obj-y				:= probe.o default.o
+obj-$(CONFIG_X86_NUMAQ)		+= numaq.o
+obj-$(CONFIG_X86_SUMMIT)	+= summit.o
+obj-$(CONFIG_X86_BIGSMP)	+= bigsmp.o
+obj-$(CONFIG_X86_ES7000)	+= es7000.o
+obj-$(CONFIG_X86_ES7000)	+= ../../x86/mach-es7000/
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 95fc463056d0..59d771714559 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -23,10 +23,8 @@ static int dmi_bigsmp; /* can be set by dmi scanners */
 
 static int hp_ht_bigsmp(const struct dmi_system_id *d)
 {
-#ifdef CONFIG_X86_GENERICARCH
 	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
 	dmi_bigsmp = 1;
-#endif
 	return 0;
 }
 
@@ -48,7 +46,7 @@ static const struct dmi_system_id bigsmp_dmi_table[] = {
 static int probe_bigsmp(void)
 {
 	if (def_to_bigsmp)
-	dmi_bigsmp = 1;
+		dmi_bigsmp = 1;
 	else
 		dmi_check_system(bigsmp_dmi_table);
 	return dmi_bigsmp;
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
new file mode 100644
index 000000000000..8091e68764c4
--- /dev/null
+++ b/arch/x86/mach-generic/numaq.c
@@ -0,0 +1,41 @@
+/*
+ * APIC driver for the IBM NUMAQ chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <asm/mach-numaq/mach_apic.h>
+#include <asm/mach-numaq/mach_apicdef.h>
+#include <asm/mach-numaq/mach_ipi.h>
+#include <asm/mach-numaq/mach_mpparse.h>
+#include <asm/mach-numaq/mach_wakecpu.h>
+#include <asm/numaq.h>
+
+static int mps_oem_check(struct mp_config_table *mpc, char *oem,
+		char *productid)
+{
+	numaq_mps_oem_check(mpc, oem, productid);
+	return found_numaq;
+}
+
+static int probe_numaq(void)
+{
+	/* already know from get_memcfg_numaq() */
+	return found_numaq;
+}
+
+/* Hook from generic ACPI tables.c */
+static int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
+
+struct genapic apic_numaq = APIC_INIT("NUMAQ", probe_numaq);
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index c5ae751b994a..5a7e4619e1c4 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -16,6 +16,7 @@
 #include <asm/apicdef.h>
 #include <asm/genapic.h>
 
+extern struct genapic apic_numaq;
 extern struct genapic apic_summit;
 extern struct genapic apic_bigsmp;
 extern struct genapic apic_es7000;
@@ -24,9 +25,18 @@ extern struct genapic apic_default;
 struct genapic *genapic = &apic_default;
 
 static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+	&apic_numaq,
+#endif
+#ifdef CONFIG_X86_SUMMIT
 	&apic_summit,
+#endif
+#ifdef CONFIG_X86_BIGSMP
 	&apic_bigsmp,
+#endif
+#ifdef CONFIG_X86_ES7000
 	&apic_es7000,
+#endif
 	&apic_default,	/* must be last */
 	NULL,
 };
@@ -54,6 +64,7 @@ early_param("apic", parse_apic);
 
 void __init generic_bigsmp_probe(void)
 {
+#ifdef CONFIG_X86_BIGSMP
 	/*
 	 * This routine is used to switch to bigsmp mode when
 	 * - There is no apic= option specified by the user
@@ -67,6 +78,7 @@ void __init generic_bigsmp_probe(void)
 			printk(KERN_INFO "Overriding APIC driver with %s\n",
 			       genapic->name);
 		}
+#endif
 }
 
 void __init generic_apic_probe(void)
@@ -88,7 +100,8 @@ void __init generic_apic_probe(void)
 
 /* These functions can switch the APIC even after the initial ->probe() */
 
-int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
+				 char *productid)
 {
 	int i;
 	for (i = 0; apic_probe[i]; ++i) {
diff --git a/arch/x86/mach-visws/Makefile b/arch/x86/mach-visws/Makefile
deleted file mode 100644
index 835fd96ad768..000000000000
--- a/arch/x86/mach-visws/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y				:= setup.o traps.o reboot.o
-
-obj-$(CONFIG_X86_VISWS_APIC)	+= visws_apic.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= mpparse.o
diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c
deleted file mode 100644
index 57484e91ab90..000000000000
--- a/arch/x86/mach-visws/mpparse.c
+++ /dev/null
@@ -1,88 +0,0 @@
-
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/smp.h>
-#include <asm/io.h>
-
-#include "cobalt.h"
-#include "mach_apic.h"
-
-/* Have we found an MP table */
-int smp_found_config;
-
-int pic_mode;
-
-extern unsigned int __cpuinitdata maxcpus;
-
-/*
- * The Visual Workstation is Intel MP compliant in the hardware
- * sense, but it doesn't have a BIOS(-configuration table).
- * No problem for Linux.
- */
-
-static void __init MP_processor_info (struct mpc_config_processor *m)
-{
-	int ver, logical_apicid;
-	physid_mask_t apic_cpus;
-
-	if (!(m->mpc_cpuflag & CPU_ENABLED))
-		return;
-
-	logical_apicid = m->mpc_apicid;
-	printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
-	       m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver);
-
-	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
-		boot_cpu_physical_apicid = m->mpc_apicid;
-
-	ver = m->mpc_apicver;
-	if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {
-		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
-			m->mpc_apicid, MAX_APICS);
-		return;
-	}
-
-	apic_cpus = apicid_to_cpu_present(m->mpc_apicid);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
-	/*
-	 * Validate version
-	 */
-	if (ver == 0x0) {
-		printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
-			"fixing up to 0x10. (tell your hw vendor)\n",
-			m->mpc_apicid);
-		ver = 0x10;
-	}
-	apic_version[m->mpc_apicid] = ver;
-}
-
-void __init find_smp_config(void)
-{
-	struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
-	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
-
-	if (ncpus > CO_CPU_MAX) {
-		printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
-			ncpus, mp);
-
-		ncpus = CO_CPU_MAX;
-	}
-
-	if (ncpus > maxcpus)
-		ncpus = maxcpus;
-
-	smp_found_config = 1;
-	while (ncpus--)
-		MP_processor_info(mp++);
-
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-}
-
-void __init get_smp_config (void)
-{
-}
diff --git a/arch/x86/mach-visws/reboot.c b/arch/x86/mach-visws/reboot.c
deleted file mode 100644
index 99332abfad42..000000000000
--- a/arch/x86/mach-visws/reboot.c
+++ /dev/null
@@ -1,55 +0,0 @@
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include "piix4.h"
-
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-void machine_shutdown(void)
-{
-#ifdef CONFIG_SMP
-	smp_send_stop();
-#endif
-}
-
-void machine_emergency_restart(void)
-{
-	/*
-	 * Visual Workstations restart after this
-	 * register is poked on the PIIX4
-	 */
-	outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
-}
-
-void machine_restart(char * __unused)
-{
-	machine_shutdown();
-	machine_emergency_restart();
-}
-
-void machine_power_off(void)
-{
-	unsigned short pm_status;
-	extern unsigned int pci_bus0;
-
-	while ((pm_status = inw(PMSTS_PORT)) & 0x100)
-		outw(pm_status, PMSTS_PORT);
-
-	outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
-
-	mdelay(10);
-
-#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
-
-	outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8);
-	outl(PIIX_SPECIAL_STOP, 0xCFC);
-}
-
-void machine_halt(void)
-{
-}
-
diff --git a/arch/x86/mach-visws/setup.c b/arch/x86/mach-visws/setup.c
deleted file mode 100644
index de4c9dbd086f..000000000000
--- a/arch/x86/mach-visws/setup.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- *  Unmaintained SGI Visual Workstation support.
- *  Split out from setup.c by davej@suse.de
- */
-
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/fixmap.h>
-#include <asm/arch_hooks.h>
-#include <asm/io.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-#include "cobalt.h"
-#include "piix4.h"
-
-int no_broadcast;
-
-char visws_board_type = -1;
-char visws_board_rev = -1;
-
-void __init visws_get_board_type_and_rev(void)
-{
-	int raw;
-
-	visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
-							 >> PIIX_GPI_BD_SHIFT;
-	/*
-	 * Get Board rev.
-	 * First, we have to initialize the 307 part to allow us access
-	 * to the GPIO registers.  Let's map them at 0x0fc0 which is right
-	 * after the PIIX4 PM section.
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_GP_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_GP_MSB, SIO_DATA);	/* MSB of GPIO base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_GP_LSB, SIO_DATA);	/* LSB of GPIO base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable GPIO registers. */
-
-	/*
-	 * Now, we have to map the power management section to write
-	 * a bit which enables access to the GPIO registers.
-	 * What lunatic came up with this shit?
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_PM_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_PM_MSB, SIO_DATA);	/* MSB of PM base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_PM_LSB, SIO_DATA);	/* LSB of PM base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable PM registers. */
-
-	/*
-	 * Now, write the PM register which enables the GPIO registers.
-	 */
-	outb_p(SIO_PM_FER2, SIO_PM_INDEX);
-	outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
-
-	/*
-	 * Now, initialize the GPIO registers.
-	 * We want them all to be inputs which is the
-	 * power on default, so let's leave them alone.
-	 * So, let's just read the board rev!
-	 */
-	raw = inb_p(SIO_GP_DATA1);
-	raw &= 0x7f;	/* 7 bits of valid board revision ID. */
-
-	if (visws_board_type == VISWS_320) {
-		if (raw < 0x6) {
-			visws_board_rev = 4;
-		} else if (raw < 0xc) {
-			visws_board_rev = 5;
-		} else {
-			visws_board_rev = 6;
-		}
-	} else if (visws_board_type == VISWS_540) {
-			visws_board_rev = 2;
-		} else {
-			visws_board_rev = raw;
-		}
-
-	printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
-	       (visws_board_type == VISWS_320 ? "320" :
-	       (visws_board_type == VISWS_540 ? "540" :
-		"unknown")), visws_board_rev);
-}
-
-void __init pre_intr_init_hook(void)
-{
-	init_VISWS_APIC_irqs();
-}
-
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic_intr_init();
-#endif
-}
-
-void __init pre_setup_arch_hook()
-{
-	visws_get_board_type_and_rev();
-}
-
-static struct irqaction irq0 = {
-	.handler =	timer_interrupt,
-	.flags =	IRQF_DISABLED | IRQF_IRQPOLL,
-	.name =		"timer",
-};
-
-void __init time_init_hook(void)
-{
-	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
-
-	/* Set the countdown value */
-	co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
-
-	/* Start the timer */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
-
-	/* Enable (unmask) the timer interrupt */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
-	/* Wire cpu IDT entry to s/w handler (and Cobalt APIC to IDT) */
-	setup_irq(0, &irq0);
-}
-
-/* Hook for machine specific memory setup. */
-
-#define MB (1024 * 1024)
-
-unsigned long sgivwfb_mem_phys;
-unsigned long sgivwfb_mem_size;
-EXPORT_SYMBOL(sgivwfb_mem_phys);
-EXPORT_SYMBOL(sgivwfb_mem_size);
-
-long long mem_size __initdata = 0;
-
-char * __init machine_specific_memory_setup(void)
-{
-	long long gfx_mem_size = 8 * MB;
-
-	mem_size = boot_params.alt_mem_k;
-
-	if (!mem_size) {
-		printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
-		mem_size = 128 * MB;
-	}
-
-	/*
-	 * this hardcodes the graphics memory to 8 MB
-	 * it really should be sized dynamically (or at least
-	 * set as a boot param)
-	 */
-	if (!sgivwfb_mem_size) {
-		printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
-		sgivwfb_mem_size = 8 * MB;
-	}
-
-	/*
-	 * Trim to nearest MB
-	 */
-	sgivwfb_mem_size &= ~((1 << 20) - 1);
-	sgivwfb_mem_phys = mem_size - gfx_mem_size;
-
-	add_memory_region(0, LOWMEMSIZE(), E820_RAM);
-	add_memory_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
-	add_memory_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
-
-	return "PROM";
-}
diff --git a/arch/x86/mach-visws/traps.c b/arch/x86/mach-visws/traps.c
deleted file mode 100644
index bfac6ba10f8a..000000000000
--- a/arch/x86/mach-visws/traps.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* VISWS traps */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-#include <asm/io.h>
-#include <asm/arch_hooks.h>
-#include <asm/apic.h>
-#include "cobalt.h"
-#include "lithium.h"
-
-
-#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
-#define BCD (LI_INTB | LI_INTC | LI_INTD)
-#define ALLDEVS (A01234 | BCD)
-
-static __init void lithium_init(void)
-{
-	set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
-	set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
-
-	if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
-	    (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
-		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
-		panic("This machine is not SGI Visual Workstation 320/540");
-	}
-
-	if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
-	    (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
-		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
-		panic("This machine is not SGI Visual Workstation 320/540");
-	}
-
-	li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
-	li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
-}
-
-static __init void cobalt_init(void)
-{
-	/*
-	 * On normal SMP PC this is used only with SMP, but we have to
-	 * use it and set it up here to start the Cobalt clock
-	 */
-	set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
-	setup_local_APIC();
-	printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
-		(unsigned int)apic_read(APIC_LVR),
-		(unsigned int)apic_read(APIC_ID));
-
-	set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
-	set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
-	printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
-		co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
-
-	/* Enable Cobalt APIC being careful to NOT change the ID! */
-	co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
-
-	printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
-		co_apic_read(CO_APIC_ID));
-}
-
-void __init trap_init_hook(void)
-{
-	lithium_init();
-	cobalt_init();
-}
diff --git a/arch/x86/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c
deleted file mode 100644
index cef9cb1d15ac..000000000000
--- a/arch/x86/mach-visws/visws_apic.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- *	Copyright (C) 1999 Bent Hagemark, Ingo Molnar
- *
- *  SGI Visual Workstation interrupt controller
- *
- *  The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
- *  which serves as the main interrupt controller in the system.  Non-legacy
- *  hardware in the system uses this controller directly.  Legacy devices
- *  are connected to the PIIX4 which in turn has its 8259(s) connected to
- *  a of the Cobalt APIC entry.
- *
- *  09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
- *
- *  25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
- */
-
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-#include "cobalt.h"
-#include "irq_vectors.h"
-
-
-static DEFINE_SPINLOCK(cobalt_lock);
-
-/*
- * Set the given Cobalt APIC Redirection Table entry to point
- * to the given IDT vector/index.
- */
-static inline void co_apic_set(int entry, int irq)
-{
-	co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
-	co_apic_write(CO_APIC_HI(entry), 0);
-}
-
-/*
- * Cobalt (IO)-APIC functions to handle PCI devices.
- */
-static inline int co_apic_ide0_hack(void)
-{
-	extern char visws_board_type;
-	extern char visws_board_rev;
-
-	if (visws_board_type == VISWS_320 && visws_board_rev == 5)
-		return 5;
-	return CO_APIC_IDE0;
-}
-
-static int is_co_apic(unsigned int irq)
-{
-	if (IS_CO_APIC(irq))
-		return CO_APIC(irq);
-
-	switch (irq) {
-		case 0: return CO_APIC_CPU;
-		case CO_IRQ_IDE0: return co_apic_ide0_hack();
-		case CO_IRQ_IDE1: return CO_APIC_IDE1;
-		default: return -1;
-	}
-}
-
-
-/*
- * This is the SGI Cobalt (IO-)APIC:
- */
-
-static void enable_cobalt_irq(unsigned int irq)
-{
-	co_apic_set(is_co_apic(irq), irq);
-}
-
-static void disable_cobalt_irq(unsigned int irq)
-{
-	int entry = is_co_apic(irq);
-
-	co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
-	co_apic_read(CO_APIC_LO(entry));
-}
-
-/*
- * "irq" really just serves to identify the device.  Here is where we
- * map this to the Cobalt APIC entry where it's physically wired.
- * This is called via request_irq -> setup_irq -> irq_desc->startup()
- */
-static unsigned int startup_cobalt_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
-		irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
-	enable_cobalt_irq(irq);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-	return 0;
-}
-
-static void ack_cobalt_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	disable_cobalt_irq(irq);
-	apic_write(APIC_EOI, APIC_EIO_ACK);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static void end_cobalt_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_cobalt_irq(irq);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip cobalt_irq_type = {
-	.typename =	"Cobalt-APIC",
-	.startup =	startup_cobalt_irq,
-	.shutdown =	disable_cobalt_irq,
-	.enable =	enable_cobalt_irq,
-	.disable =	disable_cobalt_irq,
-	.ack =		ack_cobalt_irq,
-	.end =		end_cobalt_irq,
-};
-
-
-/*
- * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
- * -- not the manner expected by the code in i8259.c.
- *
- * there is a 'master' physical interrupt source that gets sent to
- * the CPU. But in the chipset there are various 'virtual' interrupts
- * waiting to be handled. We represent this to Linux through a 'master'
- * interrupt controller type, and through a special virtual interrupt-
- * controller. Device drivers only see the virtual interrupt sources.
- */
-static unsigned int startup_piix4_master_irq(unsigned int irq)
-{
-	init_8259A(0);
-
-	return startup_cobalt_irq(irq);
-}
-
-static void end_piix4_master_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	enable_cobalt_irq(irq);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip piix4_master_irq_type = {
-	.typename =	"PIIX4-master",
-	.startup =	startup_piix4_master_irq,
-	.ack =		ack_cobalt_irq,
-	.end =		end_piix4_master_irq,
-};
-
-
-static struct irq_chip piix4_virtual_irq_type = {
-	.typename =	"PIIX4-virtual",
-	.shutdown =	disable_8259A_irq,
-	.enable =	enable_8259A_irq,
-	.disable =	disable_8259A_irq,
-};
-
-
-/*
- * PIIX4-8259 master/virtual functions to handle interrupt requests
- * from legacy devices: floppy, parallel, serial, rtc.
- *
- * None of these get Cobalt APIC entries, neither do they have IDT
- * entries. These interrupts are purely virtual and distributed from
- * the 'master' interrupt source: CO_IRQ_8259.
- *
- * When the 8259 interrupts its handler figures out which of these
- * devices is interrupting and dispatches to its handler.
- *
- * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
- * enable_irq gets the right irq. This 'master' irq is never directly
- * manipulated by any driver.
- */
-static irqreturn_t piix4_master_intr(int irq, void *dev_id)
-{
-	int realirq;
-	irq_desc_t *desc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	/* Find out what's interrupting in the PIIX4 master 8259 */
-	outb(0x0c, 0x20);		/* OCW3 Poll command */
-	realirq = inb(0x20);
-
-	/*
-	 * Bit 7 == 0 means invalid/spurious
-	 */
-	if (unlikely(!(realirq & 0x80)))
-		goto out_unlock;
-
-	realirq &= 7;
-
-	if (unlikely(realirq == 2)) {
-		outb(0x0c, 0xa0);
-		realirq = inb(0xa0);
-
-		if (unlikely(!(realirq & 0x80)))
-			goto out_unlock;
-
-		realirq = (realirq & 7) + 8;
-	}
-
-	/* mask and ack interrupt */
-	cached_irq_mask |= 1 << realirq;
-	if (unlikely(realirq > 7)) {
-		inb(0xa1);
-		outb(cached_slave_mask, 0xa1);
-		outb(0x60 + (realirq & 7), 0xa0);
-		outb(0x60 + 2, 0x20);
-	} else {
-		inb(0x21);
-		outb(cached_master_mask, 0x21);
-		outb(0x60 + realirq, 0x20);
-	}
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	desc = irq_desc + realirq;
-
-	/*
-	 * handle this 'virtual interrupt' as a Cobalt one now.
-	 */
-	kstat_cpu(smp_processor_id()).irqs[realirq]++;
-
-	if (likely(desc->action != NULL))
-		handle_IRQ_event(realirq, desc->action);
-
-	if (!(desc->status & IRQ_DISABLED))
-		enable_8259A_irq(realirq);
-
-	return IRQ_HANDLED;
-
-out_unlock:
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-	return IRQ_NONE;
-}
-
-static struct irqaction master_action = {
-	.handler =	piix4_master_intr,
-	.name =		"PIIX4-8259",
-};
-
-static struct irqaction cascade_action = {
-	.handler = 	no_action,
-	.name =		"cascade",
-};
-
-
-void init_VISWS_APIC_irqs(void)
-{
-	int i;
-
-	for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = 0;
-		irq_desc[i].depth = 1;
-
-		if (i == 0) {
-			irq_desc[i].chip = &cobalt_irq_type;
-		}
-		else if (i == CO_IRQ_IDE0) {
-			irq_desc[i].chip = &cobalt_irq_type;
-		}
-		else if (i == CO_IRQ_IDE1) {
-			irq_desc[i].chip = &cobalt_irq_type;
-		}
-		else if (i == CO_IRQ_8259) {
-			irq_desc[i].chip = &piix4_master_irq_type;
-		}
-		else if (i < CO_IRQ_APIC0) {
-			irq_desc[i].chip = &piix4_virtual_irq_type;
-		}
-		else if (IS_CO_APIC(i)) {
-			irq_desc[i].chip = &cobalt_irq_type;
-		}
-	}
-
-	setup_irq(CO_IRQ_8259, &master_action);
-	setup_irq(2, &cascade_action);
-}
diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
index 5ae5466b9eb9..6bbdd633864c 100644
--- a/arch/x86/mach-voyager/setup.c
+++ b/arch/x86/mach-voyager/setup.c
@@ -62,6 +62,7 @@ void __init time_init_hook(void)
 char *__init machine_specific_memory_setup(void)
 {
 	char *who;
+	int new_nr;
 
 	who = "NOT VOYAGER";
 
@@ -73,7 +74,7 @@ char *__init machine_specific_memory_setup(void)
 
 		e820.nr_map = 0;
 		for (i = 0; voyager_memory_detect(i, &addr, &length); i++) {
-			add_memory_region(addr, length, E820_RAM);
+			e820_add_region(addr, length, E820_RAM);
 		}
 		return who;
 	} else if (voyager_level == 4) {
@@ -91,43 +92,17 @@ char *__init machine_specific_memory_setup(void)
 			tom = (boot_params.screen_info.ext_mem_k) << 10;
 		}
 		who = "Voyager-TOM";
-		add_memory_region(0, 0x9f000, E820_RAM);
+		e820_add_region(0, 0x9f000, E820_RAM);
 		/* map from 1M to top of memory */
-		add_memory_region(1 * 1024 * 1024, tom - 1 * 1024 * 1024,
+		e820_add_region(1 * 1024 * 1024, tom - 1 * 1024 * 1024,
 				  E820_RAM);
 		/* FIXME: Should check the ASICs to see if I need to
 		 * take out the 8M window.  Just do it at the moment
 		 * */
-		add_memory_region(8 * 1024 * 1024, 8 * 1024 * 1024,
+		e820_add_region(8 * 1024 * 1024, 8 * 1024 * 1024,
 				  E820_RESERVED);
 		return who;
 	}
 
-	who = "BIOS-e820";
-
-	/*
-	 * Try to copy the BIOS-supplied E820-map.
-	 *
-	 * Otherwise fake a memory map; one section from 0k->640k,
-	 * the next section from 1mb->appropriate_mem_k
-	 */
-	sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries);
-	if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries)
-	    < 0) {
-		unsigned long mem_size;
-
-		/* compare results from other methods and take the greater */
-		if (boot_params.alt_mem_k < boot_params.screen_info.ext_mem_k) {
-			mem_size = boot_params.screen_info.ext_mem_k;
-			who = "BIOS-88";
-		} else {
-			mem_size = boot_params.alt_mem_k;
-			who = "BIOS-e801";
-		}
-
-		e820.nr_map = 0;
-		add_memory_region(0, LOWMEMSIZE(), E820_RAM);
-		add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
-	}
-	return who;
+	return default_machine_specific_memory_setup();
 }
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 8acbf0cdf1a5..ee0fba092157 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -59,11 +59,6 @@ __u32 voyager_quad_processors = 0;
  * activity count.  Finally exported by i386_ksyms.c */
 static int voyager_extended_cpus = 1;
 
-/* Have we found an SMP box - used by time.c to do the profiling
-   interrupt for timeslicing; do not set to 1 until the per CPU timer
-   interrupt is active */
-int smp_found_config = 0;
-
 /* Used for the invalidate map that's also checked in the spinlock */
 static volatile unsigned long smp_invalidate_needed;
 
@@ -955,94 +950,24 @@ static void smp_stop_cpu_function(void *dummy)
 		halt();
 }
 
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	volatile unsigned long started;
-	volatile unsigned long finished;
-	int wait;
-};
-
-static struct call_data_struct *call_data;
-
 /* execute a thread on a new CPU.  The function to be called must be
  * previously set up.  This is used to schedule a function for
  * execution on all CPUs - set up the function then broadcast a
  * function_interrupt CPI to come here on each CPU */
 static void smp_call_function_interrupt(void)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	/* must take copy of wait because call_data may be replaced
-	 * unless the function is waiting for us to finish */
-	int wait = call_data->wait;
-	__u8 cpu = smp_processor_id();
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	if (!test_and_clear_bit(cpu, &call_data->started)) {
-		/* If the bit wasn't set, this could be a replay */
-		printk(KERN_WARNING "VOYAGER SMP: CPU %d received call funtion"
-		       " with no call pending\n", cpu);
-		return;
-	}
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
 	irq_enter();
-	(*func) (info);
+	generic_smp_call_function_interrupt();
 	__get_cpu_var(irq_stat).irq_call_count++;
 	irq_exit();
-	if (wait) {
-		mb();
-		clear_bit(cpu, &call_data->finished);
-	}
 }
 
-static int
-voyager_smp_call_function_mask(cpumask_t cpumask,
-			       void (*func) (void *info), void *info, int wait)
+static void smp_call_function_single_interrupt(void)
 {
-	struct call_data_struct data;
-	u32 mask = cpus_addr(cpumask)[0];
-
-	mask &= ~(1 << smp_processor_id());
-
-	if (!mask)
-		return 0;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	data.started = mask;
-	data.wait = wait;
-	if (wait)
-		data.finished = mask;
-
-	spin_lock(&call_lock);
-	call_data = &data;
-	wmb();
-	/* Send a message to all other CPUs and wait for them to respond */
-	send_CPI(mask, VIC_CALL_FUNCTION_CPI);
-
-	/* Wait for response */
-	while (data.started)
-		barrier();
-
-	if (wait)
-		while (data.finished)
-			barrier();
-
-	spin_unlock(&call_lock);
-
-	return 0;
+	irq_enter();
+	generic_smp_call_function_single_interrupt();
+	__get_cpu_var(irq_stat).irq_call_count++;
+	irq_exit();
 }
 
 /* Sorry about the name.  In an APIC based system, the APICs
@@ -1099,6 +1024,12 @@ void smp_qic_call_function_interrupt(struct pt_regs *regs)
 	smp_call_function_interrupt();
 }
 
+void smp_qic_call_function_single_interrupt(struct pt_regs *regs)
+{
+	ack_QIC_CPI(QIC_CALL_FUNCTION_SINGLE_CPI);
+	smp_call_function_single_interrupt();
+}
+
 void smp_vic_cpi_interrupt(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
@@ -1119,6 +1050,8 @@ void smp_vic_cpi_interrupt(struct pt_regs *regs)
 		smp_enable_irq_interrupt();
 	if (test_and_clear_bit(VIC_CALL_FUNCTION_CPI, &vic_cpi_mailbox[cpu]))
 		smp_call_function_interrupt();
+	if (test_and_clear_bit(VIC_CALL_FUNCTION_SINGLE_CPI, &vic_cpi_mailbox[cpu]))
+		smp_call_function_single_interrupt();
 	set_irq_regs(old_regs);
 }
 
@@ -1134,16 +1067,7 @@ static void do_flush_tlb_all(void *info)
 /* flush the TLB of every active CPU in the system */
 void flush_tlb_all(void)
 {
-	on_each_cpu(do_flush_tlb_all, 0, 1, 1);
-}
-
-/* used to set up the trampoline for other CPUs when the memory manager
- * is sorted out */
-void __init smp_alloc_memory(void)
-{
-	trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
-	if (__pa(trampoline_base) >= 0x93000)
-		BUG();
+	on_each_cpu(do_flush_tlb_all, 0, 1);
 }
 
 /* send a reschedule CPI to one CPU by physical CPU number*/
@@ -1175,7 +1099,7 @@ int safe_smp_processor_id(void)
 /* broadcast a halt to all other CPUs */
 static void voyager_smp_send_stop(void)
 {
-	smp_call_function(smp_stop_cpu_function, NULL, 1, 1);
+	smp_call_function(smp_stop_cpu_function, NULL, 1);
 }
 
 /* this function is triggered in time.c when a clock tick fires
@@ -1862,5 +1786,7 @@ struct smp_ops smp_ops = {
 
 	.smp_send_stop = voyager_smp_send_stop,
 	.smp_send_reschedule = voyager_smp_send_reschedule,
-	.smp_call_function_mask = voyager_smp_call_function_mask,
+
+	.send_call_func_ipi = native_send_call_func_ipi,
+	.send_call_func_single_ipi = native_send_call_func_single_ipi,
 };
diff --git a/arch/x86/math-emu/reg_constant.c b/arch/x86/math-emu/reg_constant.c
index 04869e64b18e..00548354912f 100644
--- a/arch/x86/math-emu/reg_constant.c
+++ b/arch/x86/math-emu/reg_constant.c
@@ -16,8 +16,8 @@
 #include "reg_constant.h"
 #include "control_w.h"
 
-#define MAKE_REG(s,e,l,h) { l, h, \
-                            ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
+#define MAKE_REG(s, e, l, h) { l, h, \
+		((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
 
 FPU_REG const CONST_1 = MAKE_REG(POS, 0, 0x00000000, 0x80000000);
 #if 0
@@ -40,7 +40,7 @@ FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66,
 FPU_REG const CONST_Z = MAKE_REG(POS, EXP_UNDER, 0x0, 0x0);
 
 /* Only the sign and significand (and tag) are used in internal NaNs */
-/* The 80486 never generates one of these 
+/* The 80486 never generates one of these
 FPU_REG const CONST_SNAN = MAKE_REG(POS, EXP_OVER, 0x00000001, 0x80000000);
  */
 /* This is the real indefinite QNaN */
@@ -49,7 +49,7 @@ FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000);
 /* Only the sign (and tag) is used in internal infinities */
 FPU_REG const CONST_INF = MAKE_REG(POS, EXP_OVER, 0x00000000, 0x80000000);
 
-static void fld_const(FPU_REG const *c, int adj, u_char tag)
+static void fld_const(FPU_REG const * c, int adj, u_char tag)
 {
 	FPU_REG *st_new_ptr;
 
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index b7b3e4c7cfc9..2977ea37791f 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,6 +1,7 @@
 obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 	    pat.o pgtable.o
 
+obj-$(CONFIG_HAVE_GET_USER_PAGES_FAST) += gup.o
 obj-$(CONFIG_X86_32)		+= pgtable_32.o
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
@@ -8,10 +9,17 @@ obj-$(CONFIG_X86_PTDUMP)	+= dump_pagetables.o
 
 obj-$(CONFIG_HIGHMEM)		+= highmem_32.o
 
+obj-$(CONFIG_MMIOTRACE_HOOKS)	+= kmmio.o
+obj-$(CONFIG_MMIOTRACE)		+= mmiotrace.o
+mmiotrace-y			:= pf_in.o mmio-mod.o
+obj-$(CONFIG_MMIOTRACE_TEST)	+= testmmiotrace.o
+
 ifeq ($(CONFIG_X86_32),y)
 obj-$(CONFIG_NUMA)		+= discontig_32.o
 else
 obj-$(CONFIG_NUMA)		+= numa_64.o
 obj-$(CONFIG_K8_NUMA)		+= k8topology_64.o
-obj-$(CONFIG_ACPI_NUMA)		+= srat_64.o
 endif
+obj-$(CONFIG_ACPI_NUMA)		+= srat_$(BITS).o
+
+obj-$(CONFIG_MEMTEST)		+= memtest.o
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 914ccf983687..62fa440678d8 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -38,10 +38,10 @@
 #include <asm/setup.h>
 #include <asm/mmzone.h>
 #include <asm/bios_ebda.h>
+#include <asm/proto.h>
 
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node0_bdata;
 
 /*
  * numa interface - we expect the numa architecture specific code to have
@@ -59,14 +59,14 @@ unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
 /*
  * 4) physnode_map     - the mapping between a pfn and owning node
  * physnode_map keeps track of the physical memory layout of a generic
- * numa node on a 256Mb break (each element of the array will
- * represent 256Mb of memory and will be marked by the node id.  so,
+ * numa node on a 64Mb break (each element of the array will
+ * represent 64Mb of memory and will be marked by the node id.  so,
  * if the first gig is on node 0, and the second gig is on node 1
  * physnode_map will contain:
  *
- *     physnode_map[0-3] = 0;
- *     physnode_map[4-7] = 1;
- *     physnode_map[8- ] = -1;
+ *     physnode_map[0-15] = 0;
+ *     physnode_map[16-31] = 1;
+ *     physnode_map[32- ] = -1;
  */
 s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1};
 EXPORT_SYMBOL(physnode_map);
@@ -75,15 +75,15 @@ void memory_present(int nid, unsigned long start, unsigned long end)
 {
 	unsigned long pfn;
 
-	printk(KERN_INFO "Node: %d, start_pfn: %ld, end_pfn: %ld\n",
+	printk(KERN_INFO "Node: %d, start_pfn: %lx, end_pfn: %lx\n",
 			nid, start, end);
 	printk(KERN_DEBUG "  Setting physnode_map array to node %d for pfns:\n", nid);
 	printk(KERN_DEBUG "  ");
 	for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) {
 		physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
-		printk("%ld ", pfn);
+		printk(KERN_CONT "%lx ", pfn);
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
 }
 
 unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
@@ -99,7 +99,6 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
 #endif
 
 extern unsigned long find_max_low_pfn(void);
-extern void add_one_highpage_init(struct page *, int, int);
 extern unsigned long highend_pfn, highstart_pfn;
 
 #define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
@@ -117,13 +116,13 @@ static unsigned long kva_pages;
  */
 int __init get_memcfg_numa_flat(void)
 {
-	printk("NUMA - single node, flat memory mode\n");
+	printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
 
-	/* Run the memory configuration and find the top of memory. */
-	propagate_e820_map();
 	node_start_pfn[0] = 0;
 	node_end_pfn[0] = max_pfn;
+	e820_register_active_regions(0, 0, max_pfn);
 	memory_present(0, 0, max_pfn);
+	node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn);
 
         /* Indicate there is one node available. */
 	nodes_clear(node_online_map);
@@ -156,24 +155,32 @@ static void __init propagate_e820_map_node(int nid)
  */
 static void __init allocate_pgdat(int nid)
 {
-	if (nid && node_has_online_mem(nid))
+	char buf[16];
+
+	if (node_has_online_mem(nid) && node_remap_start_vaddr[nid])
 		NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
 	else {
-		NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn));
-		min_low_pfn += PFN_UP(sizeof(pg_data_t));
+		unsigned long pgdat_phys;
+		pgdat_phys = find_e820_area(min_low_pfn<<PAGE_SHIFT,
+				 max_pfn_mapped<<PAGE_SHIFT,
+				 sizeof(pg_data_t),
+				 PAGE_SIZE);
+		NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
+		memset(buf, 0, sizeof(buf));
+		sprintf(buf, "NODE_DATA %d",  nid);
+		reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
 	}
+	printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
+		nid, (unsigned long)NODE_DATA(nid));
 }
 
-#ifdef CONFIG_DISCONTIGMEM
 /*
- * In the discontig memory model, a portion of the kernel virtual area (KVA)
- * is reserved and portions of nodes are mapped using it. This is to allow
- * node-local memory to be allocated for structures that would normally require
- * ZONE_NORMAL. The memory is allocated with alloc_remap() and callers
- * should be prepared to allocate from the bootmem allocator instead. This KVA
- * mechanism is incompatible with SPARSEMEM as it makes assumptions about the
- * layout of memory that are broken if alloc_remap() succeeds for some of the
- * map and fails for others
+ * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel
+ * virtual address space (KVA) is reserved and portions of nodes are mapped
+ * using it. This is to allow node-local memory to be allocated for
+ * structures that would normally require ZONE_NORMAL. The memory is
+ * allocated with alloc_remap() and callers should be prepared to allocate
+ * from the bootmem allocator instead.
  */
 static unsigned long node_remap_start_pfn[MAX_NUMNODES];
 static void *node_remap_end_vaddr[MAX_NUMNODES];
@@ -195,15 +202,19 @@ void *alloc_remap(int nid, unsigned long size)
 	return allocation;
 }
 
-void __init remap_numa_kva(void)
+static void __init remap_numa_kva(void)
 {
 	void *vaddr;
 	unsigned long pfn;
 	int node;
 
 	for_each_online_node(node) {
+		printk(KERN_DEBUG "remap_numa_kva: node %d\n", node);
 		for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
 			vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
+			printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n",
+				(unsigned long)vaddr,
+				node_remap_start_pfn[node] + pfn);
 			set_pmd_pfn((ulong) vaddr, 
 				node_remap_start_pfn[node] + pfn, 
 				PAGE_KERNEL_LARGE);
@@ -215,17 +226,21 @@ static unsigned long calculate_numa_remap_pages(void)
 {
 	int nid;
 	unsigned long size, reserve_pages = 0;
-	unsigned long pfn;
 
 	for_each_online_node(nid) {
-		unsigned old_end_pfn = node_end_pfn[nid];
+		u64 node_kva_target;
+		u64 node_kva_final;
 
 		/*
 		 * The acpi/srat node info can show hot-add memroy zones
 		 * where memory could be added but not currently present.
 		 */
+		printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
+			nid, node_start_pfn[nid], node_end_pfn[nid]);
 		if (node_start_pfn[nid] > max_pfn)
 			continue;
+		if (!node_end_pfn[nid])
+			continue;
 		if (node_end_pfn[nid] > max_pfn)
 			node_end_pfn[nid] = max_pfn;
 
@@ -237,41 +252,48 @@ static unsigned long calculate_numa_remap_pages(void)
 		/* now the roundup is correct, convert to PAGE_SIZE pages */
 		size = size * PTRS_PER_PTE;
 
-		/*
-		 * Validate the region we are allocating only contains valid
-		 * pages.
-		 */
-		for (pfn = node_end_pfn[nid] - size;
-		     pfn < node_end_pfn[nid]; pfn++)
-			if (!page_is_ram(pfn))
-				break;
-
-		if (pfn != node_end_pfn[nid])
-			size = 0;
+		node_kva_target = round_down(node_end_pfn[nid] - size,
+						 PTRS_PER_PTE);
+		node_kva_target <<= PAGE_SHIFT;
+		do {
+			node_kva_final = find_e820_area(node_kva_target,
+					((u64)node_end_pfn[nid])<<PAGE_SHIFT,
+						((u64)size)<<PAGE_SHIFT,
+						LARGE_PAGE_BYTES);
+			node_kva_target -= LARGE_PAGE_BYTES;
+		} while (node_kva_final == -1ULL &&
+			 (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid]));
+
+		if (node_kva_final == -1ULL)
+			panic("Can not get kva ram\n");
 
-		printk("Reserving %ld pages of KVA for lmem_map of node %d\n",
-				size, nid);
 		node_remap_size[nid] = size;
 		node_remap_offset[nid] = reserve_pages;
 		reserve_pages += size;
-		printk("Shrinking node %d from %ld pages to %ld pages\n",
-			nid, node_end_pfn[nid], node_end_pfn[nid] - size);
-
-		if (node_end_pfn[nid] & (PTRS_PER_PTE-1)) {
-			/*
-			 * Align node_end_pfn[] and node_remap_start_pfn[] to
-			 * pmd boundary. remap_numa_kva will barf otherwise.
-			 */
-			printk("Shrinking node %d further by %ld pages for proper alignment\n",
-				nid, node_end_pfn[nid] & (PTRS_PER_PTE-1));
-			size +=  node_end_pfn[nid] & (PTRS_PER_PTE-1);
-		}
+		printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of"
+				  " node %d at %llx\n",
+				size, nid, node_kva_final>>PAGE_SHIFT);
+
+		/*
+		 *  prevent kva address below max_low_pfn want it on system
+		 *  with less memory later.
+		 *  layout will be: KVA address , KVA RAM
+		 *
+		 *  we are supposed to only record the one less then max_low_pfn
+		 *  but we could have some hole in high memory, and it will only
+		 *  check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide
+		 *  to use it as free.
+		 *  So reserve_early here, hope we don't run out of that array
+		 */
+		reserve_early(node_kva_final,
+			      node_kva_final+(((u64)size)<<PAGE_SHIFT),
+			      "KVA RAM");
 
-		node_end_pfn[nid] -= size;
-		node_remap_start_pfn[nid] = node_end_pfn[nid];
-		shrink_active_range(nid, old_end_pfn, node_end_pfn[nid]);
+		node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT;
+		remove_active_range(nid, node_remap_start_pfn[nid],
+					 node_remap_start_pfn[nid] + size);
 	}
-	printk("Reserving total of %ld pages for numa KVA remap\n",
+	printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
 			reserve_pages);
 	return reserve_pages;
 }
@@ -285,37 +307,16 @@ static void init_remap_allocator(int nid)
 	node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
 		ALIGN(sizeof(pg_data_t), PAGE_SIZE);
 
-	printk ("node %d will remap to vaddr %08lx - %08lx\n", nid,
+	printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
 		(ulong) node_remap_start_vaddr[nid],
-		(ulong) pfn_to_kaddr(highstart_pfn
-		   + node_remap_offset[nid] + node_remap_size[nid]));
-}
-#else
-void *alloc_remap(int nid, unsigned long size)
-{
-	return NULL;
-}
-
-static unsigned long calculate_numa_remap_pages(void)
-{
-	return 0;
-}
-
-static void init_remap_allocator(int nid)
-{
-}
-
-void __init remap_numa_kva(void)
-{
+		(ulong) node_remap_end_vaddr[nid]);
 }
-#endif /* CONFIG_DISCONTIGMEM */
 
-extern void setup_bootmem_allocator(void);
-unsigned long __init setup_memory(void)
+void __init initmem_init(unsigned long start_pfn,
+				  unsigned long end_pfn)
 {
 	int nid;
-	unsigned long system_start_pfn, system_max_low_pfn;
-	unsigned long wasted_pages;
+	long kva_target_pfn;
 
 	/*
 	 * When mapping a NUMA machine we allocate the node_mem_map arrays
@@ -324,109 +325,77 @@ unsigned long __init setup_memory(void)
 	 * this space and use it to adjust the boundary between ZONE_NORMAL
 	 * and ZONE_HIGHMEM.
 	 */
-	get_memcfg_numa();
 
-	kva_pages = calculate_numa_remap_pages();
+	get_memcfg_numa();
 
-	/* partially used pages are not usable - thus round upwards */
-	system_start_pfn = min_low_pfn = PFN_UP(init_pg_tables_end);
+	kva_pages = round_up(calculate_numa_remap_pages(), PTRS_PER_PTE);
 
-	kva_start_pfn = find_max_low_pfn() - kva_pages;
+	kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
+	do {
+		kva_start_pfn = find_e820_area(kva_target_pfn<<PAGE_SHIFT,
+					max_low_pfn<<PAGE_SHIFT,
+					kva_pages<<PAGE_SHIFT,
+					PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT;
+		kva_target_pfn -= PTRS_PER_PTE;
+	} while (kva_start_pfn == -1UL && kva_target_pfn > min_low_pfn);
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* Numa kva area is below the initrd */
-	if (initrd_start)
-		kva_start_pfn = PFN_DOWN(initrd_start - PAGE_OFFSET)
-			- kva_pages;
-#endif
+	if (kva_start_pfn == -1UL)
+		panic("Can not get kva space\n");
 
-	/*
-	 * We waste pages past at the end of the KVA for no good reason other
-	 * than how it is located. This is bad.
-	 */
-	wasted_pages = kva_start_pfn & (PTRS_PER_PTE-1);
-	kva_start_pfn -= wasted_pages;
-	kva_pages += wasted_pages;
-
-	system_max_low_pfn = max_low_pfn = find_max_low_pfn();
-	printk("kva_start_pfn ~ %ld find_max_low_pfn() ~ %ld\n",
+	printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
 		kva_start_pfn, max_low_pfn);
-	printk("max_pfn = %ld\n", max_pfn);
+	printk(KERN_INFO "max_pfn = %lx\n", max_pfn);
+
+	/* avoid clash with initrd */
+	reserve_early(kva_start_pfn<<PAGE_SHIFT,
+		      (kva_start_pfn + kva_pages)<<PAGE_SHIFT,
+		     "KVA PG");
 #ifdef CONFIG_HIGHMEM
 	highstart_pfn = highend_pfn = max_pfn;
-	if (max_pfn > system_max_low_pfn)
-		highstart_pfn = system_max_low_pfn;
+	if (max_pfn > max_low_pfn)
+		highstart_pfn = max_low_pfn;
 	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
 	       pages_to_mb(highend_pfn - highstart_pfn));
 	num_physpages = highend_pfn;
 	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
 #else
-	num_physpages = system_max_low_pfn;
-	high_memory = (void *) __va(system_max_low_pfn * PAGE_SIZE - 1) + 1;
+	num_physpages = max_low_pfn;
+	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
 #endif
 	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
-			pages_to_mb(system_max_low_pfn));
-	printk("min_low_pfn = %ld, max_low_pfn = %ld, highstart_pfn = %ld\n", 
-			min_low_pfn, max_low_pfn, highstart_pfn);
+			pages_to_mb(max_low_pfn));
+	printk(KERN_DEBUG "max_low_pfn = %lx, highstart_pfn = %lx\n",
+			max_low_pfn, highstart_pfn);
 
-	printk("Low memory ends at vaddr %08lx\n",
+	printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
 			(ulong) pfn_to_kaddr(max_low_pfn));
 	for_each_online_node(nid) {
 		init_remap_allocator(nid);
 
 		allocate_pgdat(nid);
 	}
-	printk("High memory starts at vaddr %08lx\n",
+	remap_numa_kva();
+
+	printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
 			(ulong) pfn_to_kaddr(highstart_pfn));
 	for_each_online_node(nid)
 		propagate_e820_map_node(nid);
 
-	memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
-	NODE_DATA(0)->bdata = &node0_bdata;
-	setup_bootmem_allocator();
-	return max_low_pfn;
-}
-
-void __init numa_kva_reserve(void)
-{
-	if (kva_pages)
-		reserve_bootmem(PFN_PHYS(kva_start_pfn), PFN_PHYS(kva_pages),
-				BOOTMEM_DEFAULT);
-}
-
-void __init zone_sizes_init(void)
-{
-	int nid;
-	unsigned long max_zone_pfns[MAX_NR_ZONES];
-	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] =
-		virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
-#endif
-
-	/* If SRAT has not registered memory, register it now */
-	if (find_max_pfn_with_active_regions() == 0) {
-		for_each_online_node(nid) {
-			if (node_has_online_mem(nid))
-				add_active_range(nid, node_start_pfn[nid],
-							node_end_pfn[nid]);
-		}
-	}
+	for_each_online_node(nid)
+		memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	free_area_init_nodes(max_zone_pfns);
-	return;
+	NODE_DATA(0)->bdata = &bootmem_node_data[0];
+	setup_bootmem_allocator();
 }
 
-void __init set_highmem_pages_init(int bad_ppro) 
+void __init set_highmem_pages_init(void)
 {
 #ifdef CONFIG_HIGHMEM
 	struct zone *zone;
-	struct page *page;
+	int nid;
 
 	for_each_zone(zone) {
-		unsigned long node_pfn, zone_start_pfn, zone_end_pfn;
+		unsigned long zone_start_pfn, zone_end_pfn;
 
 		if (!is_highmem(zone))
 			continue;
@@ -434,16 +403,12 @@ void __init set_highmem_pages_init(int bad_ppro)
 		zone_start_pfn = zone->zone_start_pfn;
 		zone_end_pfn = zone_start_pfn + zone->spanned_pages;
 
-		printk("Initializing %s for node %d (%08lx:%08lx)\n",
-				zone->name, zone_to_nid(zone),
-				zone_start_pfn, zone_end_pfn);
+		nid = zone_to_nid(zone);
+		printk(KERN_INFO "Initializing %s for node %d (%08lx:%08lx)\n",
+				zone->name, nid, zone_start_pfn, zone_end_pfn);
 
-		for (node_pfn = zone_start_pfn; node_pfn < zone_end_pfn; node_pfn++) {
-			if (!pfn_valid(node_pfn))
-				continue;
-			page = pfn_to_page(node_pfn);
-			add_one_highpage_init(page, node_pfn, bad_ppro);
-		}
+		add_highpages_with_active_regions(nid, zone_start_pfn,
+				 zone_end_pfn);
 	}
 	totalram_pages += totalhigh_pages;
 #endif
@@ -476,3 +441,4 @@ int memory_add_physaddr_to_nid(u64 addr)
 
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 #endif
+
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 2c24bea92c66..a20d1fa64b4e 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -42,7 +42,7 @@ static struct addr_marker address_markers[] = {
 	{ 0, "User Space" },
 #ifdef CONFIG_X86_64
 	{ 0x8000000000000000UL, "Kernel Space" },
-	{ 0xffff810000000000UL, "Low Kernel Mapping" },
+	{ PAGE_OFFSET,		"Low Kernel Mapping" },
 	{ VMALLOC_START,        "vmalloc() Area" },
 	{ VMEMMAP_START,        "Vmemmap" },
 	{ __START_KERNEL_map,   "High Kernel Mapping" },
@@ -148,8 +148,8 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot) & ~(PTE_MASK);
-	cur = pgprot_val(st->current_prot) & ~(PTE_MASK);
+	prot = pgprot_val(new_prot) & ~(PTE_PFN_MASK);
+	cur = pgprot_val(st->current_prot) & ~(PTE_PFN_MASK);
 
 	if (!st->level) {
 		/* First entry */
@@ -221,7 +221,7 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
 	for (i = 0; i < PTRS_PER_PMD; i++) {
 		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
 		if (!pmd_none(*start)) {
-			pgprotval_t prot = pmd_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pmd_val(*start) & PTE_FLAGS_MASK;
 
 			if (pmd_large(*start) || !pmd_present(*start))
 				note_page(m, st, __pgprot(prot), 3);
@@ -253,7 +253,7 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
 	for (i = 0; i < PTRS_PER_PUD; i++) {
 		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
 		if (!pud_none(*start)) {
-			pgprotval_t prot = pud_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pud_val(*start) & PTE_FLAGS_MASK;
 
 			if (pud_large(*start) || !pud_present(*start))
 				note_page(m, st, __pgprot(prot), 2);
@@ -288,7 +288,7 @@ static void walk_pgd_level(struct seq_file *m)
 	for (i = 0; i < PTRS_PER_PGD; i++) {
 		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
 		if (!pgd_none(*start)) {
-			pgprotval_t prot = pgd_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pgd_val(*start) & PTE_FLAGS_MASK;
 
 			if (pgd_large(*start) || !pgd_present(*start))
 				note_page(m, &st, __pgprot(prot), 1);
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 8bcb6f40ccb6..455f3fe67b42 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -10,6 +10,7 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/ptrace.h>
+#include <linux/mmiotrace.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
@@ -49,17 +50,23 @@
 #define PF_RSVD		(1<<3)
 #define PF_INSTR	(1<<4)
 
+static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr)
+{
+#ifdef CONFIG_MMIOTRACE_HOOKS
+	if (unlikely(is_kmmio_active()))
+		if (kmmio_handler(regs, addr) == 1)
+			return -1;
+#endif
+	return 0;
+}
+
 static inline int notify_page_fault(struct pt_regs *regs)
 {
 #ifdef CONFIG_KPROBES
 	int ret = 0;
 
 	/* kprobe_running() needs smp_processor_id() */
-#ifdef CONFIG_X86_32
 	if (!user_mode_vm(regs)) {
-#else
-	if (!user_mode(regs)) {
-#endif
 		preempt_disable();
 		if (kprobe_running() && kprobe_fault_handler(regs, 14))
 			ret = 1;
@@ -396,11 +403,7 @@ static void show_fault_oops(struct pt_regs *regs, unsigned long error_code,
 		printk(KERN_CONT "NULL pointer dereference");
 	else
 		printk(KERN_CONT "paging request");
-#ifdef CONFIG_X86_32
-	printk(KERN_CONT " at %08lx\n", address);
-#else
-	printk(KERN_CONT " at %016lx\n", address);
-#endif
+	printk(KERN_CONT " at %p\n", (void *) address);
 	printk(KERN_ALERT "IP:");
 	printk_address(regs->ip, 1);
 	dump_pagetable(address);
@@ -606,6 +609,8 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 
 	if (notify_page_fault(regs))
 		return;
+	if (unlikely(kmmio_fault(regs, address)))
+		return;
 
 	/*
 	 * We fault-in kernel-space virtual memory on-demand. The
@@ -800,14 +805,10 @@ bad_area_nosemaphore:
 		if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
 		    printk_ratelimit()) {
 			printk(
-#ifdef CONFIG_X86_32
-			"%s%s[%d]: segfault at %lx ip %08lx sp %08lx error %lx",
-#else
-			"%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx",
-#endif
+			"%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
 			task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
-			tsk->comm, task_pid_nr(tsk), address, regs->ip,
-			regs->sp, error_code);
+			tsk->comm, task_pid_nr(tsk), address,
+			(void *) regs->ip, (void *) regs->sp, error_code);
 			print_vma_addr(" in ", regs->ip);
 			printk("\n");
 		}
@@ -915,14 +916,7 @@ LIST_HEAD(pgd_list);
 void vmalloc_sync_all(void)
 {
 #ifdef CONFIG_X86_32
-	/*
-	 * Note that races in the updates of insync and start aren't
-	 * problematic: insync can only get set bits added, and updates to
-	 * start are only improving performance (without affecting correctness
-	 * if undone).
-	 */
-	static DECLARE_BITMAP(insync, PTRS_PER_PGD);
-	static unsigned long start = TASK_SIZE;
+	unsigned long start = VMALLOC_START & PGDIR_MASK;
 	unsigned long address;
 
 	if (SHARED_KERNEL_PMD)
@@ -930,56 +924,38 @@ void vmalloc_sync_all(void)
 
 	BUILD_BUG_ON(TASK_SIZE & ~PGDIR_MASK);
 	for (address = start; address >= TASK_SIZE; address += PGDIR_SIZE) {
-		if (!test_bit(pgd_index(address), insync)) {
-			unsigned long flags;
-			struct page *page;
-
-			spin_lock_irqsave(&pgd_lock, flags);
-			list_for_each_entry(page, &pgd_list, lru) {
-				if (!vmalloc_sync_one(page_address(page),
-						      address))
-					break;
-			}
-			spin_unlock_irqrestore(&pgd_lock, flags);
-			if (!page)
-				set_bit(pgd_index(address), insync);
+		unsigned long flags;
+		struct page *page;
+
+		spin_lock_irqsave(&pgd_lock, flags);
+		list_for_each_entry(page, &pgd_list, lru) {
+			if (!vmalloc_sync_one(page_address(page),
+					      address))
+				break;
 		}
-		if (address == start && test_bit(pgd_index(address), insync))
-			start = address + PGDIR_SIZE;
+		spin_unlock_irqrestore(&pgd_lock, flags);
 	}
 #else /* CONFIG_X86_64 */
-	/*
-	 * Note that races in the updates of insync and start aren't
-	 * problematic: insync can only get set bits added, and updates to
-	 * start are only improving performance (without affecting correctness
-	 * if undone).
-	 */
-	static DECLARE_BITMAP(insync, PTRS_PER_PGD);
-	static unsigned long start = VMALLOC_START & PGDIR_MASK;
+	unsigned long start = VMALLOC_START & PGDIR_MASK;
 	unsigned long address;
 
 	for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) {
-		if (!test_bit(pgd_index(address), insync)) {
-			const pgd_t *pgd_ref = pgd_offset_k(address);
-			unsigned long flags;
-			struct page *page;
-
-			if (pgd_none(*pgd_ref))
-				continue;
-			spin_lock_irqsave(&pgd_lock, flags);
-			list_for_each_entry(page, &pgd_list, lru) {
-				pgd_t *pgd;
-				pgd = (pgd_t *)page_address(page) + pgd_index(address);
-				if (pgd_none(*pgd))
-					set_pgd(pgd, *pgd_ref);
-				else
-					BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
-			}
-			spin_unlock_irqrestore(&pgd_lock, flags);
-			set_bit(pgd_index(address), insync);
+		const pgd_t *pgd_ref = pgd_offset_k(address);
+		unsigned long flags;
+		struct page *page;
+
+		if (pgd_none(*pgd_ref))
+			continue;
+		spin_lock_irqsave(&pgd_lock, flags);
+		list_for_each_entry(page, &pgd_list, lru) {
+			pgd_t *pgd;
+			pgd = (pgd_t *)page_address(page) + pgd_index(address);
+			if (pgd_none(*pgd))
+				set_pgd(pgd, *pgd_ref);
+			else
+				BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
 		}
-		if (address == start)
-			start = address + PGDIR_SIZE;
+		spin_unlock_irqrestore(&pgd_lock, flags);
 	}
 #endif
 }
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
new file mode 100644
index 000000000000..3085f25b4355
--- /dev/null
+++ b/arch/x86/mm/gup.c
@@ -0,0 +1,295 @@
+/*
+ * Lockless get_user_pages_fast for x86
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/vmstat.h>
+#include <linux/highmem.h>
+
+#include <asm/pgtable.h>
+
+static inline pte_t gup_get_pte(pte_t *ptep)
+{
+#ifndef CONFIG_X86_PAE
+	return *ptep;
+#else
+	/*
+	 * With get_user_pages_fast, we walk down the pagetables without taking
+	 * any locks.  For this we would like to load the pointers atoimcally,
+	 * but that is not possible (without expensive cmpxchg8b) on PAE.  What
+	 * we do have is the guarantee that a pte will only either go from not
+	 * present to present, or present to not present or both -- it will not
+	 * switch to a completely different present page without a TLB flush in
+	 * between; something that we are blocking by holding interrupts off.
+	 *
+	 * Setting ptes from not present to present goes:
+	 * ptep->pte_high = h;
+	 * smp_wmb();
+	 * ptep->pte_low = l;
+	 *
+	 * And present to not present goes:
+	 * ptep->pte_low = 0;
+	 * smp_wmb();
+	 * ptep->pte_high = 0;
+	 *
+	 * We must ensure here that the load of pte_low sees l iff pte_high
+	 * sees h. We load pte_high *after* loading pte_low, which ensures we
+	 * don't see an older value of pte_high.  *Then* we recheck pte_low,
+	 * which ensures that we haven't picked up a changed pte high. We might
+	 * have got rubbish values from pte_low and pte_high, but we are
+	 * guaranteed that pte_low will not have the present bit set *unless*
+	 * it is 'l'. And get_user_pages_fast only operates on present ptes, so
+	 * we're safe.
+	 *
+	 * gup_get_pte should not be used or copied outside gup.c without being
+	 * very careful -- it does not atomically load the pte or anything that
+	 * is likely to be useful for you.
+	 */
+	pte_t pte;
+
+retry:
+	pte.pte_low = ptep->pte_low;
+	smp_rmb();
+	pte.pte_high = ptep->pte_high;
+	smp_rmb();
+	if (unlikely(pte.pte_low != ptep->pte_low))
+		goto retry;
+
+	return pte;
+#endif
+}
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t *ptep;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+
+	ptep = pte_offset_map(&pmd, addr);
+	do {
+		pte_t pte = gup_get_pte(ptep);
+		struct page *page;
+
+		if ((pte_val(pte) & (mask | _PAGE_SPECIAL)) != mask) {
+			pte_unmap(ptep);
+			return 0;
+		}
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		get_page(page);
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+	pte_unmap(ptep - 1);
+
+	return 1;
+}
+
+static inline void get_head_page_multiple(struct page *page, int nr)
+{
+	VM_BUG_ON(page != compound_head(page));
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(nr, &page->_count);
+}
+
+static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pmd;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (unlikely(pmd_large(pmd))) {
+			if (!gup_huge_pmd(pmd, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+				return 0;
+		}
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pud;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+			int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (unlikely(pud_large(pud))) {
+			if (!gup_huge_pud(pud, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+				return 0;
+		}
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long end = start + (nr_pages << PAGE_SHIFT);
+	unsigned long addr = start;
+	unsigned long next;
+	pgd_t *pgdp;
+	int nr = 0;
+
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, nr_pages*PAGE_SIZE)))
+		goto slow_irqon;
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables and pages from being freed on x86.
+	 *
+	 * So long as we atomically load page table pointers versus teardown
+	 * (which we do on x86, with the above PAE exception), we can follow the
+	 * address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd_t pgd = *pgdp;
+
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			goto slow;
+		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+			goto slow;
+	} while (pgdp++, addr = next, addr != end);
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 0b3d567e686d..8f307d914c2e 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -124,7 +124,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 1;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -133,9 +134,14 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 	pgd = pgd_offset(mm, addr);
 	pud = pud_alloc(mm, pgd, addr);
 	if (pud) {
-		if (pud_none(*pud))
-			huge_pmd_share(mm, addr, pud);
-		pte = (pte_t *) pmd_alloc(mm, pud, addr);
+		if (sz == PUD_SIZE) {
+			pte = (pte_t *)pud;
+		} else {
+			BUG_ON(sz != PMD_SIZE);
+			if (pud_none(*pud))
+				huge_pmd_share(mm, addr, pud);
+			pte = (pte_t *) pmd_alloc(mm, pud, addr);
+		}
 	}
 	BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
 
@@ -151,8 +157,11 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	pgd = pgd_offset(mm, addr);
 	if (pgd_present(*pgd)) {
 		pud = pud_offset(pgd, addr);
-		if (pud_present(*pud))
+		if (pud_present(*pud)) {
+			if (pud_large(*pud))
+				return (pte_t *)pud;
 			pmd = pmd_offset(pud, addr);
+		}
 	}
 	return (pte_t *) pmd;
 }
@@ -188,6 +197,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -208,6 +222,11 @@ int pmd_huge(pmd_t pmd)
 	return !!(pmd_val(pmd) & _PAGE_PSE);
 }
 
+int pud_huge(pud_t pud)
+{
+	return !!(pud_val(pud) & _PAGE_PSE);
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -216,9 +235,22 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 
 	page = pte_page(*(pte_t *)pmd);
 	if (page)
-		page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT);
+		page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
+	return page;
+}
+
+struct page *
+follow_huge_pud(struct mm_struct *mm, unsigned long address,
+		pud_t *pud, int write)
+{
+	struct page *page;
+
+	page = pte_page(*(pte_t *)pud);
+	if (page)
+		page += ((address & ~PUD_MASK) >> PAGE_SHIFT);
 	return page;
 }
+
 #endif
 
 /* x86_64 also uses this file */
@@ -228,6 +260,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
 		unsigned long addr, unsigned long len,
 		unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
@@ -240,7 +273,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
 	}
 
 full_search:
-	addr = ALIGN(start_addr, HPAGE_SIZE);
+	addr = ALIGN(start_addr, huge_page_size(h));
 
 	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
 		/* At this point:  (!vma || addr < vma->vm_end). */
@@ -262,7 +295,7 @@ full_search:
 		}
 		if (addr + mm->cached_hole_size < vma->vm_start)
 		        mm->cached_hole_size = vma->vm_start - addr;
-		addr = ALIGN(vma->vm_end, HPAGE_SIZE);
+		addr = ALIGN(vma->vm_end, huge_page_size(h));
 	}
 }
 
@@ -270,6 +303,7 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
 		unsigned long addr0, unsigned long len,
 		unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma, *prev_vma;
 	unsigned long base = mm->mmap_base, addr = addr0;
@@ -290,7 +324,7 @@ try_again:
 		goto fail;
 
 	/* either no address requested or cant fit in requested address hole */
-	addr = (mm->free_area_cache - len) & HPAGE_MASK;
+	addr = (mm->free_area_cache - len) & huge_page_mask(h);
 	do {
 		/*
 		 * Lookup failure means no vma is above this address,
@@ -321,7 +355,7 @@ try_again:
 		        largest_hole = vma->vm_start - addr;
 
 		/* try just below the current vma->vm_start */
-		addr = (vma->vm_start - len) & HPAGE_MASK;
+		addr = (vma->vm_start - len) & huge_page_mask(h);
 	} while (len <= vma->vm_start);
 
 fail:
@@ -359,22 +393,23 @@ unsigned long
 hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		unsigned long len, unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 
-	if (len & ~HPAGE_MASK)
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
 	if (len > TASK_SIZE)
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
 
 	if (addr) {
-		addr = ALIGN(addr, HPAGE_SIZE);
+		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
 		    (!vma || addr + len <= vma->vm_start))
@@ -390,3 +425,20 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 
 #endif /*HAVE_ARCH_HUGETLB_UNMAPPED_AREA*/
 
+#ifdef CONFIG_X86_64
+static __init int setup_hugepagesz(char *opt)
+{
+	unsigned long ps = memparse(opt, &opt);
+	if (ps == PMD_SIZE) {
+		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
+	} else if (ps == PUD_SIZE && cpu_has_gbpages) {
+		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+	} else {
+		printk(KERN_ERR "hugepagesz: Unsupported page size %lu M\n",
+			ps >> 20);
+		return 0;
+	}
+	return 1;
+}
+__setup("hugepagesz=", setup_hugepagesz);
+#endif
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index ec30d10154b6..d37f29376b0c 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -50,6 +50,7 @@
 
 unsigned int __VMALLOC_RESERVE = 128 << 20;
 
+unsigned long max_low_pfn_mapped;
 unsigned long max_pfn_mapped;
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -57,6 +58,27 @@ unsigned long highstart_pfn, highend_pfn;
 
 static noinline int do_test_wp_bit(void);
 
+
+static unsigned long __initdata table_start;
+static unsigned long __meminitdata table_end;
+static unsigned long __meminitdata table_top;
+
+static int __initdata after_init_bootmem;
+
+static __init void *alloc_low_page(unsigned long *phys)
+{
+	unsigned long pfn = table_end++;
+	void *adr;
+
+	if (pfn >= table_top)
+		panic("alloc_low_page: ran out of memory");
+
+	adr = __va(pfn * PAGE_SIZE);
+	memset(adr, 0, PAGE_SIZE);
+	*phys  = pfn * PAGE_SIZE;
+	return adr;
+}
+
 /*
  * Creates a middle page table and puts a pointer to it in the
  * given global directory entry. This only returns the gd entry
@@ -68,9 +90,12 @@ static pmd_t * __init one_md_table_init(pgd_t *pgd)
 	pmd_t *pmd_table;
 
 #ifdef CONFIG_X86_PAE
+	unsigned long phys;
 	if (!(pgd_val(*pgd) & _PAGE_PRESENT)) {
-		pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE);
-
+		if (after_init_bootmem)
+			pmd_table = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+		else
+			pmd_table = (pmd_t *)alloc_low_page(&phys);
 		paravirt_alloc_pmd(&init_mm, __pa(pmd_table) >> PAGE_SHIFT);
 		set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT));
 		pud = pud_offset(pgd, 0);
@@ -92,12 +117,16 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)
 	if (!(pmd_val(*pmd) & _PAGE_PRESENT)) {
 		pte_t *page_table = NULL;
 
+		if (after_init_bootmem) {
 #ifdef CONFIG_DEBUG_PAGEALLOC
-		page_table = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
+			page_table = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
 #endif
-		if (!page_table) {
-			page_table =
+			if (!page_table)
+				page_table =
 				(pte_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+		} else {
+			unsigned long phys;
+			page_table = (pte_t *)alloc_low_page(&phys);
 		}
 
 		paravirt_alloc_pte(&init_mm, __pa(page_table) >> PAGE_SHIFT);
@@ -155,38 +184,44 @@ static inline int is_kernel_text(unsigned long addr)
  * of max_low_pfn pages, by creating page tables starting from address
  * PAGE_OFFSET:
  */
-static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
+static void __init kernel_physical_mapping_init(pgd_t *pgd_base,
+						unsigned long start_pfn,
+						unsigned long end_pfn,
+						int use_pse)
 {
 	int pgd_idx, pmd_idx, pte_ofs;
 	unsigned long pfn;
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
+	unsigned pages_2m = 0, pages_4k = 0;
 
-	pgd_idx = pgd_index(PAGE_OFFSET);
-	pgd = pgd_base + pgd_idx;
-	pfn = 0;
+	if (!cpu_has_pse)
+		use_pse = 0;
 
+	pfn = start_pfn;
+	pgd_idx = pgd_index((pfn<<PAGE_SHIFT) + PAGE_OFFSET);
+	pgd = pgd_base + pgd_idx;
 	for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
 		pmd = one_md_table_init(pgd);
-		if (pfn >= max_low_pfn)
-			continue;
 
-		for (pmd_idx = 0;
-		     pmd_idx < PTRS_PER_PMD && pfn < max_low_pfn;
+		if (pfn >= end_pfn)
+			continue;
+#ifdef CONFIG_X86_PAE
+		pmd_idx = pmd_index((pfn<<PAGE_SHIFT) + PAGE_OFFSET);
+		pmd += pmd_idx;
+#else
+		pmd_idx = 0;
+#endif
+		for (; pmd_idx < PTRS_PER_PMD && pfn < end_pfn;
 		     pmd++, pmd_idx++) {
 			unsigned int addr = pfn * PAGE_SIZE + PAGE_OFFSET;
 
 			/*
 			 * Map with big pages if possible, otherwise
 			 * create normal page tables:
-			 *
-			 * Don't use a large page for the first 2/4MB of memory
-			 * because there are often fixed size MTRRs in there
-			 * and overlapping MTRRs into large pages can cause
-			 * slowdowns.
 			 */
-			if (cpu_has_pse && !(pgd_idx == 0 && pmd_idx == 0)) {
+			if (use_pse) {
 				unsigned int addr2;
 				pgprot_t prot = PAGE_KERNEL_LARGE;
 
@@ -197,34 +232,30 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 				    is_kernel_text(addr2))
 					prot = PAGE_KERNEL_LARGE_EXEC;
 
+				pages_2m++;
 				set_pmd(pmd, pfn_pmd(pfn, prot));
 
 				pfn += PTRS_PER_PTE;
-				max_pfn_mapped = pfn;
 				continue;
 			}
 			pte = one_page_table_init(pmd);
 
-			for (pte_ofs = 0;
-			     pte_ofs < PTRS_PER_PTE && pfn < max_low_pfn;
+			pte_ofs = pte_index((pfn<<PAGE_SHIFT) + PAGE_OFFSET);
+			pte += pte_ofs;
+			for (; pte_ofs < PTRS_PER_PTE && pfn < end_pfn;
 			     pte++, pfn++, pte_ofs++, addr += PAGE_SIZE) {
 				pgprot_t prot = PAGE_KERNEL;
 
 				if (is_kernel_text(addr))
 					prot = PAGE_KERNEL_EXEC;
 
+				pages_4k++;
 				set_pte(pte, pfn_pte(pfn, prot));
 			}
-			max_pfn_mapped = pfn;
 		}
 	}
-}
-
-static inline int page_kills_ppro(unsigned long pagenr)
-{
-	if (pagenr >= 0x70000 && pagenr <= 0x7003F)
-		return 1;
-	return 0;
+	update_page_count(PG_LEVEL_2M, pages_2m);
+	update_page_count(PG_LEVEL_4K, pages_4k);
 }
 
 /*
@@ -287,29 +318,62 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base)
 	pkmap_page_table = pte;
 }
 
-void __init add_one_highpage_init(struct page *page, int pfn, int bad_ppro)
+static void __init add_one_highpage_init(struct page *page, int pfn)
 {
-	if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn))) {
-		ClearPageReserved(page);
-		init_page_count(page);
-		__free_page(page);
-		totalhigh_pages++;
-	} else
-		SetPageReserved(page);
+	ClearPageReserved(page);
+	init_page_count(page);
+	__free_page(page);
+	totalhigh_pages++;
 }
 
-#ifndef CONFIG_NUMA
-static void __init set_highmem_pages_init(int bad_ppro)
+struct add_highpages_data {
+	unsigned long start_pfn;
+	unsigned long end_pfn;
+};
+
+static int __init add_highpages_work_fn(unsigned long start_pfn,
+					 unsigned long end_pfn, void *datax)
 {
-	int pfn;
+	int node_pfn;
+	struct page *page;
+	unsigned long final_start_pfn, final_end_pfn;
+	struct add_highpages_data *data;
 
-	for (pfn = highstart_pfn; pfn < highend_pfn; pfn++) {
-		/*
-		 * Holes under sparsemem might not have no mem_map[]:
-		 */
-		if (pfn_valid(pfn))
-			add_one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
+	data = (struct add_highpages_data *)datax;
+
+	final_start_pfn = max(start_pfn, data->start_pfn);
+	final_end_pfn = min(end_pfn, data->end_pfn);
+	if (final_start_pfn >= final_end_pfn)
+		return 0;
+
+	for (node_pfn = final_start_pfn; node_pfn < final_end_pfn;
+	     node_pfn++) {
+		if (!pfn_valid(node_pfn))
+			continue;
+		page = pfn_to_page(node_pfn);
+		add_one_highpage_init(page, node_pfn);
 	}
+
+	return 0;
+
+}
+
+void __init add_highpages_with_active_regions(int nid, unsigned long start_pfn,
+					      unsigned long end_pfn)
+{
+	struct add_highpages_data data;
+
+	data.start_pfn = start_pfn;
+	data.end_pfn = end_pfn;
+
+	work_with_active_regions(nid, add_highpages_work_fn, &data);
+}
+
+#ifndef CONFIG_NUMA
+static void __init set_highmem_pages_init(void)
+{
+	add_highpages_with_active_regions(0, highstart_pfn, highend_pfn);
+
 	totalram_pages += totalhigh_pages;
 }
 #endif /* !CONFIG_NUMA */
@@ -317,14 +381,9 @@ static void __init set_highmem_pages_init(int bad_ppro)
 #else
 # define kmap_init()				do { } while (0)
 # define permanent_kmaps_init(pgd_base)		do { } while (0)
-# define set_highmem_pages_init(bad_ppro)	do { } while (0)
+# define set_highmem_pages_init()	do { } while (0)
 #endif /* CONFIG_HIGHMEM */
 
-pteval_t __PAGE_KERNEL = _PAGE_KERNEL;
-EXPORT_SYMBOL(__PAGE_KERNEL);
-
-pteval_t __PAGE_KERNEL_EXEC = _PAGE_KERNEL_EXEC;
-
 void __init native_pagetable_setup_start(pgd_t *base)
 {
 	unsigned long pfn, va;
@@ -380,27 +439,10 @@ void __init native_pagetable_setup_done(pgd_t *base)
  * be partially populated, and so it avoids stomping on any existing
  * mappings.
  */
-static void __init pagetable_init(void)
+static void __init early_ioremap_page_table_range_init(pgd_t *pgd_base)
 {
-	pgd_t *pgd_base = swapper_pg_dir;
 	unsigned long vaddr, end;
 
-	paravirt_pagetable_setup_start(pgd_base);
-
-	/* Enable PSE if available */
-	if (cpu_has_pse)
-		set_in_cr4(X86_CR4_PSE);
-
-	/* Enable PGE if available */
-	if (cpu_has_pge) {
-		set_in_cr4(X86_CR4_PGE);
-		__PAGE_KERNEL |= _PAGE_GLOBAL;
-		__PAGE_KERNEL_EXEC |= _PAGE_GLOBAL;
-	}
-
-	kernel_physical_mapping_init(pgd_base);
-	remap_numa_kva();
-
 	/*
 	 * Fixed mappings, only the page table structure has to be
 	 * created - mappings will be set by set_fixmap():
@@ -410,6 +452,13 @@ static void __init pagetable_init(void)
 	end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
 	page_table_range_init(vaddr, end, pgd_base);
 	early_ioremap_reset();
+}
+
+static void __init pagetable_init(void)
+{
+	pgd_t *pgd_base = swapper_pg_dir;
+
+	paravirt_pagetable_setup_start(pgd_base);
 
 	permanent_kmaps_init(pgd_base);
 
@@ -456,7 +505,7 @@ void zap_low_mappings(void)
 
 int nx_enabled;
 
-pteval_t __supported_pte_mask __read_mostly = ~_PAGE_NX;
+pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL);
 EXPORT_SYMBOL_GPL(__supported_pte_mask);
 
 #ifdef CONFIG_X86_PAE
@@ -509,27 +558,319 @@ static void __init set_nx(void)
 }
 #endif
 
+/* user-defined highmem size */
+static unsigned int highmem_pages = -1;
+
 /*
- * paging_init() sets up the page tables - note that the first 8MB are
- * already mapped by head.S.
- *
- * This routines also unmaps the page at virtual kernel address 0, so
- * that we can trap those pesky NULL-reference errors in the kernel.
+ * highmem=size forces highmem to be exactly 'size' bytes.
+ * This works even on boxes that have no highmem otherwise.
+ * This also works to reduce highmem size on bigger boxes.
  */
-void __init paging_init(void)
+static int __init parse_highmem(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
+	return 0;
+}
+early_param("highmem", parse_highmem);
+
+/*
+ * Determine low and high memory ranges:
+ */
+void __init find_low_pfn_range(void)
+{
+	/* it could update max_pfn */
+
+	/* max_low_pfn is 0, we already have early_res support */
+
+	max_low_pfn = max_pfn;
+	if (max_low_pfn > MAXMEM_PFN) {
+		if (highmem_pages == -1)
+			highmem_pages = max_pfn - MAXMEM_PFN;
+		if (highmem_pages + MAXMEM_PFN < max_pfn)
+			max_pfn = MAXMEM_PFN + highmem_pages;
+		if (highmem_pages + MAXMEM_PFN > max_pfn) {
+			printk(KERN_WARNING "only %luMB highmem pages "
+				"available, ignoring highmem size of %uMB.\n",
+				pages_to_mb(max_pfn - MAXMEM_PFN),
+				pages_to_mb(highmem_pages));
+			highmem_pages = 0;
+		}
+		max_low_pfn = MAXMEM_PFN;
+#ifndef CONFIG_HIGHMEM
+		/* Maximum memory usable is what is directly addressable */
+		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
+					MAXMEM>>20);
+		if (max_pfn > MAX_NONPAE_PFN)
+			printk(KERN_WARNING
+				 "Use a HIGHMEM64G enabled kernel.\n");
+		else
+			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+		max_pfn = MAXMEM_PFN;
+#else /* !CONFIG_HIGHMEM */
+#ifndef CONFIG_HIGHMEM64G
+		if (max_pfn > MAX_NONPAE_PFN) {
+			max_pfn = MAX_NONPAE_PFN;
+			printk(KERN_WARNING "Warning only 4GB will be used."
+				"Use a HIGHMEM64G enabled kernel.\n");
+		}
+#endif /* !CONFIG_HIGHMEM64G */
+#endif /* !CONFIG_HIGHMEM */
+	} else {
+		if (highmem_pages == -1)
+			highmem_pages = 0;
+#ifdef CONFIG_HIGHMEM
+		if (highmem_pages >= max_pfn) {
+			printk(KERN_ERR "highmem size specified (%uMB) is "
+				"bigger than pages available (%luMB)!.\n",
+				pages_to_mb(highmem_pages),
+				pages_to_mb(max_pfn));
+			highmem_pages = 0;
+		}
+		if (highmem_pages) {
+			if (max_low_pfn - highmem_pages <
+			    64*1024*1024/PAGE_SIZE){
+				printk(KERN_ERR "highmem size %uMB results in "
+				"smaller than 64MB lowmem, ignoring it.\n"
+					, pages_to_mb(highmem_pages));
+				highmem_pages = 0;
+			}
+			max_low_pfn -= highmem_pages;
+		}
+#else
+		if (highmem_pages)
+			printk(KERN_ERR "ignoring highmem size on non-highmem"
+					" kernel!\n");
+#endif
+	}
+}
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+void __init initmem_init(unsigned long start_pfn,
+				  unsigned long end_pfn)
 {
+#ifdef CONFIG_HIGHMEM
+	highstart_pfn = highend_pfn = max_pfn;
+	if (max_pfn > max_low_pfn)
+		highstart_pfn = max_low_pfn;
+	memory_present(0, 0, highend_pfn);
+	e820_register_active_regions(0, 0, highend_pfn);
+	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+		pages_to_mb(highend_pfn - highstart_pfn));
+	num_physpages = highend_pfn;
+	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
+#else
+	memory_present(0, 0, max_low_pfn);
+	e820_register_active_regions(0, 0, max_low_pfn);
+	num_physpages = max_low_pfn;
+	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
+#endif
+#ifdef CONFIG_FLATMEM
+	max_mapnr = num_physpages;
+#endif
+	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+			pages_to_mb(max_low_pfn));
+
+	setup_bootmem_allocator();
+}
+#endif /* !CONFIG_NEED_MULTIPLE_NODES */
+
+static void __init zone_sizes_init(void)
+{
+	unsigned long max_zone_pfns[MAX_NR_ZONES];
+	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+	max_zone_pfns[ZONE_DMA] =
+		virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+#ifdef CONFIG_HIGHMEM
+	max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
+#endif
+
+	free_area_init_nodes(max_zone_pfns);
+}
+
+void __init setup_bootmem_allocator(void)
+{
+	int i;
+	unsigned long bootmap_size, bootmap;
+	/*
+	 * Initialize the boot-time allocator (with low memory only):
+	 */
+	bootmap_size = bootmem_bootmap_pages(max_low_pfn)<<PAGE_SHIFT;
+	bootmap = find_e820_area(min_low_pfn<<PAGE_SHIFT,
+				 max_pfn_mapped<<PAGE_SHIFT, bootmap_size,
+				 PAGE_SIZE);
+	if (bootmap == -1L)
+		panic("Cannot find bootmem map of size %ld\n", bootmap_size);
+	reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP");
+
+	/* don't touch min_low_pfn */
+	bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap >> PAGE_SHIFT,
+					 min_low_pfn, max_low_pfn);
+	printk(KERN_INFO "  mapped low ram: 0 - %08lx\n",
+		 max_pfn_mapped<<PAGE_SHIFT);
+	printk(KERN_INFO "  low ram: %08lx - %08lx\n",
+		 min_low_pfn<<PAGE_SHIFT, max_low_pfn<<PAGE_SHIFT);
+	printk(KERN_INFO "  bootmap %08lx - %08lx\n",
+		 bootmap, bootmap + bootmap_size);
+	for_each_online_node(i)
+		free_bootmem_with_active_regions(i, max_low_pfn);
+	early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
+
+	after_init_bootmem = 1;
+}
+
+static void __init find_early_table_space(unsigned long end)
+{
+	unsigned long puds, pmds, ptes, tables, start;
+
+	puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
+	tables = PAGE_ALIGN(puds * sizeof(pud_t));
+
+	pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
+	tables += PAGE_ALIGN(pmds * sizeof(pmd_t));
+
+	if (cpu_has_pse) {
+		unsigned long extra;
+
+		extra = end - ((end>>PMD_SHIFT) << PMD_SHIFT);
+		extra += PMD_SIZE;
+		ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	} else
+		ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+	tables += PAGE_ALIGN(ptes * sizeof(pte_t));
+
+	/* for fixmap */
+	tables += PAGE_SIZE * 2;
+
+	/*
+	 * RED-PEN putting page tables only on node 0 could
+	 * cause a hotspot and fill up ZONE_DMA. The page tables
+	 * need roughly 0.5KB per GB.
+	 */
+	start = 0x7000;
+	table_start = find_e820_area(start, max_pfn_mapped<<PAGE_SHIFT,
+					tables, PAGE_SIZE);
+	if (table_start == -1UL)
+		panic("Cannot find space for the kernel page tables");
+
+	table_start >>= PAGE_SHIFT;
+	table_end = table_start;
+	table_top = table_start + (tables>>PAGE_SHIFT);
+
+	printk(KERN_DEBUG "kernel direct mapping tables up to %lx @ %lx-%lx\n",
+		end, table_start << PAGE_SHIFT,
+		(table_start << PAGE_SHIFT) + tables);
+}
+
+unsigned long __init_refok init_memory_mapping(unsigned long start,
+						unsigned long end)
+{
+	pgd_t *pgd_base = swapper_pg_dir;
+	unsigned long start_pfn, end_pfn;
+	unsigned long big_page_start;
+
+	/*
+	 * Find space for the kernel direct mapping tables.
+	 */
+	if (!after_init_bootmem)
+		find_early_table_space(end);
+
 #ifdef CONFIG_X86_PAE
 	set_nx();
 	if (nx_enabled)
 		printk(KERN_INFO "NX (Execute Disable) protection: active\n");
 #endif
-	pagetable_init();
+
+	/* Enable PSE if available */
+	if (cpu_has_pse)
+		set_in_cr4(X86_CR4_PSE);
+
+	/* Enable PGE if available */
+	if (cpu_has_pge) {
+		set_in_cr4(X86_CR4_PGE);
+		__supported_pte_mask |= _PAGE_GLOBAL;
+	}
+
+	/*
+	 * Don't use a large page for the first 2/4MB of memory
+	 * because there are often fixed size MTRRs in there
+	 * and overlapping MTRRs into large pages can cause
+	 * slowdowns.
+	 */
+	big_page_start = PMD_SIZE;
+
+	if (start < big_page_start) {
+		start_pfn = start >> PAGE_SHIFT;
+		end_pfn = min(big_page_start>>PAGE_SHIFT, end>>PAGE_SHIFT);
+	} else {
+		/* head is not big page alignment ? */
+		start_pfn = start >> PAGE_SHIFT;
+		end_pfn = ((start + (PMD_SIZE - 1))>>PMD_SHIFT)
+				 << (PMD_SHIFT - PAGE_SHIFT);
+	}
+	if (start_pfn < end_pfn)
+		kernel_physical_mapping_init(pgd_base, start_pfn, end_pfn, 0);
+
+	/* big page range */
+	start_pfn = ((start + (PMD_SIZE - 1))>>PMD_SHIFT)
+			 << (PMD_SHIFT - PAGE_SHIFT);
+	if (start_pfn < (big_page_start >> PAGE_SHIFT))
+		start_pfn =  big_page_start >> PAGE_SHIFT;
+	end_pfn = (end>>PMD_SHIFT) << (PMD_SHIFT - PAGE_SHIFT);
+	if (start_pfn < end_pfn)
+		kernel_physical_mapping_init(pgd_base, start_pfn, end_pfn,
+						cpu_has_pse);
+
+	/* tail is not big page alignment ? */
+	start_pfn = end_pfn;
+	if (start_pfn > (big_page_start>>PAGE_SHIFT)) {
+		end_pfn = end >> PAGE_SHIFT;
+		if (start_pfn < end_pfn)
+			kernel_physical_mapping_init(pgd_base, start_pfn,
+							 end_pfn, 0);
+	}
+
+	early_ioremap_page_table_range_init(pgd_base);
 
 	load_cr3(swapper_pg_dir);
 
 	__flush_tlb_all();
 
+	if (!after_init_bootmem)
+		reserve_early(table_start << PAGE_SHIFT,
+				 table_end << PAGE_SHIFT, "PGTABLE");
+
+	if (!after_init_bootmem)
+		early_memtest(start, end);
+
+	return end >> PAGE_SHIFT;
+}
+
+
+/*
+ * paging_init() sets up the page tables - note that the first 8MB are
+ * already mapped by head.S.
+ *
+ * This routines also unmaps the page at virtual kernel address 0, so
+ * that we can trap those pesky NULL-reference errors in the kernel.
+ */
+void __init paging_init(void)
+{
+	pagetable_init();
+
+	__flush_tlb_all();
+
 	kmap_init();
+
+	/*
+	 * NOTE: at this point the bootmem allocator is fully available.
+	 */
+	sparse_init();
+	zone_sizes_init();
 }
 
 /*
@@ -564,24 +905,11 @@ static struct kcore_list kcore_mem, kcore_vmalloc;
 void __init mem_init(void)
 {
 	int codesize, reservedpages, datasize, initsize;
-	int tmp, bad_ppro;
+	int tmp;
 
 #ifdef CONFIG_FLATMEM
 	BUG_ON(!mem_map);
 #endif
-	bad_ppro = ppro_with_ram_bug();
-
-#ifdef CONFIG_HIGHMEM
-	/* check that fixmap and pkmap do not overlap */
-	if (PKMAP_BASE + LAST_PKMAP*PAGE_SIZE >= FIXADDR_START) {
-		printk(KERN_ERR
-			"fixmap and kmap areas overlap - this will crash\n");
-		printk(KERN_ERR "pkstart: %lxh pkend: %lxh fixstart %lxh\n",
-				PKMAP_BASE, PKMAP_BASE + LAST_PKMAP*PAGE_SIZE,
-				FIXADDR_START);
-		BUG();
-	}
-#endif
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem();
 
@@ -593,7 +921,7 @@ void __init mem_init(void)
 		if (page_is_ram(tmp) && PageReserved(pfn_to_page(tmp)))
 			reservedpages++;
 
-	set_highmem_pages_init(bad_ppro);
+	set_highmem_pages_init();
 
 	codesize =  (unsigned long) &_etext - (unsigned long) &_text;
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
@@ -614,7 +942,6 @@ void __init mem_init(void)
 		(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))
 	       );
 
-#if 1 /* double-sanity-check paranoia */
 	printk(KERN_INFO "virtual kernel memory layout:\n"
 		"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
 #ifdef CONFIG_HIGHMEM
@@ -655,7 +982,6 @@ void __init mem_init(void)
 #endif
 	BUG_ON(VMALLOC_START				> VMALLOC_END);
 	BUG_ON((unsigned long)high_memory		> VMALLOC_START);
-#endif /* double-sanity-check paranoia */
 
 	if (boot_cpu_data.wp_works_ok < 0)
 		test_wp_bit();
@@ -710,6 +1036,8 @@ void mark_rodata_ro(void)
 	unsigned long start = PFN_ALIGN(_text);
 	unsigned long size = PFN_ALIGN(_etext) - start;
 
+#ifndef CONFIG_DYNAMIC_FTRACE
+	/* Dynamic tracing modifies the kernel text section */
 	set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
 	printk(KERN_INFO "Write protecting the kernel text: %luk\n",
 		size >> 10);
@@ -722,6 +1050,8 @@ void mark_rodata_ro(void)
 	printk(KERN_INFO "Testing CPA: write protecting again\n");
 	set_pages_ro(virt_to_page(start), size>>PAGE_SHIFT);
 #endif
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
 	start += size;
 	size = (unsigned long)__end_rodata - start;
 	set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
@@ -784,3 +1114,9 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 	free_init_pages("initrd memory", start, end);
 }
 #endif
+
+int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
+				   int flags)
+{
+	return reserve_bootmem(phys, len, flags);
+}
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 819dad973b13..129618ca0ea2 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -18,6 +18,7 @@
 #include <linux/swap.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/initrd.h>
 #include <linux/pagemap.h>
 #include <linux/bootmem.h>
 #include <linux/proc_fs.h>
@@ -47,6 +48,14 @@
 #include <asm/numa.h>
 #include <asm/cacheflush.h>
 
+/*
+ * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
+ * The direct mapping extends to max_pfn_mapped, so that we can directly access
+ * apertures, ACPI and other tables without having to play with fixmaps.
+ */
+unsigned long max_low_pfn_mapped;
+unsigned long max_pfn_mapped;
+
 static unsigned long dma_reserve __initdata;
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -77,43 +86,6 @@ early_param("gbpages", parse_direct_gbpages_on);
  * around without checking the pgd every time.
  */
 
-void show_mem(void)
-{
-	long i, total = 0, reserved = 0;
-	long shared = 0, cached = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			/*
-			 * This loop can take a while with 256 GB and
-			 * 4k pages so defer the NMI watchdog:
-			 */
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-	}
-	printk(KERN_INFO "%lu pages of RAM\n",		total);
-	printk(KERN_INFO "%lu reserved pages\n",	reserved);
-	printk(KERN_INFO "%lu pages shared\n",		shared);
-	printk(KERN_INFO "%lu pages swap cached\n",	cached);
-}
-
 int after_bootmem;
 
 static __init void *spp_getpage(void)
@@ -135,26 +107,17 @@ static __init void *spp_getpage(void)
 	return ptr;
 }
 
-static __init void
-set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot)
+void
+set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte)
 {
-	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
-	pte_t *pte, new_pte;
-
-	pr_debug("set_pte_phys %lx to %lx\n", vaddr, phys);
+	pte_t *pte;
 
-	pgd = pgd_offset_k(vaddr);
-	if (pgd_none(*pgd)) {
-		printk(KERN_ERR
-			"PGD FIXMAP MISSING, it should be setup in head.S!\n");
-		return;
-	}
-	pud = pud_offset(pgd, vaddr);
+	pud = pud_page + pud_index(vaddr);
 	if (pud_none(*pud)) {
 		pmd = (pmd_t *) spp_getpage();
-		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE | _PAGE_USER));
+		pud_populate(&init_mm, pud, pmd);
 		if (pmd != pmd_offset(pud, 0)) {
 			printk(KERN_ERR "PAGETABLE BUG #01! %p <-> %p\n",
 				pmd, pmd_offset(pud, 0));
@@ -164,13 +127,12 @@ set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot)
 	pmd = pmd_offset(pud, vaddr);
 	if (pmd_none(*pmd)) {
 		pte = (pte_t *) spp_getpage();
-		set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER));
+		pmd_populate_kernel(&init_mm, pmd, pte);
 		if (pte != pte_offset_kernel(pmd, 0)) {
 			printk(KERN_ERR "PAGETABLE BUG #02!\n");
 			return;
 		}
 	}
-	new_pte = pfn_pte(phys >> PAGE_SHIFT, prot);
 
 	pte = pte_offset_kernel(pmd, vaddr);
 	if (!pte_none(*pte) && pte_val(new_pte) &&
@@ -185,6 +147,64 @@ set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot)
 	__flush_tlb_one(vaddr);
 }
 
+void
+set_pte_vaddr(unsigned long vaddr, pte_t pteval)
+{
+	pgd_t *pgd;
+	pud_t *pud_page;
+
+	pr_debug("set_pte_vaddr %lx to %lx\n", vaddr, native_pte_val(pteval));
+
+	pgd = pgd_offset_k(vaddr);
+	if (pgd_none(*pgd)) {
+		printk(KERN_ERR
+			"PGD FIXMAP MISSING, it should be setup in head.S!\n");
+		return;
+	}
+	pud_page = (pud_t*)pgd_page_vaddr(*pgd);
+	set_pte_vaddr_pud(pud_page, vaddr, pteval);
+}
+
+/*
+ * Create large page table mappings for a range of physical addresses.
+ */
+static void __init __init_extra_mapping(unsigned long phys, unsigned long size,
+						pgprot_t prot)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+
+	BUG_ON((phys & ~PMD_MASK) || (size & ~PMD_MASK));
+	for (; size; phys += PMD_SIZE, size -= PMD_SIZE) {
+		pgd = pgd_offset_k((unsigned long)__va(phys));
+		if (pgd_none(*pgd)) {
+			pud = (pud_t *) spp_getpage();
+			set_pgd(pgd, __pgd(__pa(pud) | _KERNPG_TABLE |
+						_PAGE_USER));
+		}
+		pud = pud_offset(pgd, (unsigned long)__va(phys));
+		if (pud_none(*pud)) {
+			pmd = (pmd_t *) spp_getpage();
+			set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE |
+						_PAGE_USER));
+		}
+		pmd = pmd_offset(pud, phys);
+		BUG_ON(!pmd_none(*pmd));
+		set_pmd(pmd, __pmd(phys | pgprot_val(prot)));
+	}
+}
+
+void __init init_extra_mapping_wb(unsigned long phys, unsigned long size)
+{
+	__init_extra_mapping(phys, size, PAGE_KERNEL_LARGE);
+}
+
+void __init init_extra_mapping_uc(unsigned long phys, unsigned long size)
+{
+	__init_extra_mapping(phys, size, PAGE_KERNEL_LARGE_NOCACHE);
+}
+
 /*
  * The head.S code sets up the kernel high mapping:
  *
@@ -213,20 +233,9 @@ void __init cleanup_highmap(void)
 	}
 }
 
-/* NOTE: this is meant to be run only at boot */
-void __init __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
-{
-	unsigned long address = __fix_to_virt(idx);
-
-	if (idx >= __end_of_fixed_addresses) {
-		printk(KERN_ERR "Invalid __set_fixmap\n");
-		return;
-	}
-	set_pte_phys(address, phys, prot);
-}
-
 static unsigned long __initdata table_start;
 static unsigned long __meminitdata table_end;
+static unsigned long __meminitdata table_top;
 
 static __meminit void *alloc_low_page(unsigned long *phys)
 {
@@ -240,7 +249,7 @@ static __meminit void *alloc_low_page(unsigned long *phys)
 		return adr;
 	}
 
-	if (pfn >= end_pfn)
+	if (pfn >= table_top)
 		panic("alloc_low_page: ran out of memory");
 
 	adr = early_ioremap(pfn * PAGE_SIZE, PAGE_SIZE);
@@ -257,65 +266,61 @@ static __meminit void unmap_low_page(void *adr)
 	early_iounmap(adr, PAGE_SIZE);
 }
 
-/* Must run before zap_low_mappings */
-__meminit void *early_ioremap(unsigned long addr, unsigned long size)
+static unsigned long __meminit
+phys_pte_init(pte_t *pte_page, unsigned long addr, unsigned long end)
 {
-	pmd_t *pmd, *last_pmd;
-	unsigned long vaddr;
-	int i, pmds;
+	unsigned pages = 0;
+	unsigned long last_map_addr = end;
+	int i;
+
+	pte_t *pte = pte_page + pte_index(addr);
 
-	pmds = ((addr & ~PMD_MASK) + size + ~PMD_MASK) / PMD_SIZE;
-	vaddr = __START_KERNEL_map;
-	pmd = level2_kernel_pgt;
-	last_pmd = level2_kernel_pgt + PTRS_PER_PMD - 1;
+	for(i = pte_index(addr); i < PTRS_PER_PTE; i++, addr += PAGE_SIZE, pte++) {
 
-	for (; pmd <= last_pmd; pmd++, vaddr += PMD_SIZE) {
-		for (i = 0; i < pmds; i++) {
-			if (pmd_present(pmd[i]))
-				goto continue_outer_loop;
+		if (addr >= end) {
+			if (!after_bootmem) {
+				for(; i < PTRS_PER_PTE; i++, pte++)
+					set_pte(pte, __pte(0));
+			}
+			break;
 		}
-		vaddr += addr & ~PMD_MASK;
-		addr &= PMD_MASK;
 
-		for (i = 0; i < pmds; i++, addr += PMD_SIZE)
-			set_pmd(pmd+i, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC));
-		__flush_tlb_all();
+		if (pte_val(*pte))
+			continue;
 
-		return (void *)vaddr;
-continue_outer_loop:
-		;
+		if (0)
+			printk("   pte=%p addr=%lx pte=%016lx\n",
+			       pte, addr, pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL).pte);
+		set_pte(pte, pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL));
+		last_map_addr = (addr & PAGE_MASK) + PAGE_SIZE;
+		pages++;
 	}
-	printk(KERN_ERR "early_ioremap(0x%lx, %lu) failed\n", addr, size);
+	update_page_count(PG_LEVEL_4K, pages);
 
-	return NULL;
+	return last_map_addr;
 }
 
-/*
- * To avoid virtual aliases later:
- */
-__meminit void early_iounmap(void *addr, unsigned long size)
+static unsigned long __meminit
+phys_pte_update(pmd_t *pmd, unsigned long address, unsigned long end)
 {
-	unsigned long vaddr;
-	pmd_t *pmd;
-	int i, pmds;
-
-	vaddr = (unsigned long)addr;
-	pmds = ((vaddr & ~PMD_MASK) + size + ~PMD_MASK) / PMD_SIZE;
-	pmd = level2_kernel_pgt + pmd_index(vaddr);
+	pte_t *pte = (pte_t *)pmd_page_vaddr(*pmd);
 
-	for (i = 0; i < pmds; i++)
-		pmd_clear(pmd + i);
-
-	__flush_tlb_all();
+	return phys_pte_init(pte, address, end);
 }
 
 static unsigned long __meminit
-phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end)
+phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
+			 unsigned long page_size_mask)
 {
+	unsigned long pages = 0;
+	unsigned long last_map_addr = end;
+
 	int i = pmd_index(address);
 
 	for (; i < PTRS_PER_PMD; i++, address += PMD_SIZE) {
+		unsigned long pte_phys;
 		pmd_t *pmd = pmd_page + pmd_index(address);
+		pte_t *pte;
 
 		if (address >= end) {
 			if (!after_bootmem) {
@@ -325,31 +330,50 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end)
 			break;
 		}
 
-		if (pmd_val(*pmd))
+		if (pmd_val(*pmd)) {
+			if (!pmd_large(*pmd))
+				last_map_addr = phys_pte_update(pmd, address,
+								 end);
 			continue;
+		}
 
-		set_pte((pte_t *)pmd,
-			pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+		if (page_size_mask & (1<<PG_LEVEL_2M)) {
+			pages++;
+			set_pte((pte_t *)pmd,
+				pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			last_map_addr = (address & PMD_MASK) + PMD_SIZE;
+			continue;
+		}
+
+		pte = alloc_low_page(&pte_phys);
+		last_map_addr = phys_pte_init(pte, address, end);
+		unmap_low_page(pte);
+
+		pmd_populate_kernel(&init_mm, pmd, __va(pte_phys));
 	}
-	return address;
+	update_page_count(PG_LEVEL_2M, pages);
+	return last_map_addr;
 }
 
 static unsigned long __meminit
-phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end)
+phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end,
+			 unsigned long page_size_mask)
 {
 	pmd_t *pmd = pmd_offset(pud, 0);
 	unsigned long last_map_addr;
 
 	spin_lock(&init_mm.page_table_lock);
-	last_map_addr = phys_pmd_init(pmd, address, end);
+	last_map_addr = phys_pmd_init(pmd, address, end, page_size_mask);
 	spin_unlock(&init_mm.page_table_lock);
 	__flush_tlb_all();
 	return last_map_addr;
 }
 
 static unsigned long __meminit
-phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
+phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
+			 unsigned long page_size_mask)
 {
+	unsigned long pages = 0;
 	unsigned long last_map_addr = end;
 	int i = pud_index(addr);
 
@@ -369,11 +393,13 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
 
 		if (pud_val(*pud)) {
 			if (!pud_large(*pud))
-				last_map_addr = phys_pmd_update(pud, addr, end);
+				last_map_addr = phys_pmd_update(pud, addr, end,
+							 page_size_mask);
 			continue;
 		}
 
-		if (direct_gbpages) {
+		if (page_size_mask & (1<<PG_LEVEL_1G)) {
+			pages++;
 			set_pte((pte_t *)pud,
 				pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
 			last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
@@ -383,27 +409,50 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
 		pmd = alloc_low_page(&pmd_phys);
 
 		spin_lock(&init_mm.page_table_lock);
-		set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE));
-		last_map_addr = phys_pmd_init(pmd, addr, end);
+		last_map_addr = phys_pmd_init(pmd, addr, end, page_size_mask);
+		unmap_low_page(pmd);
+		pud_populate(&init_mm, pud, __va(pmd_phys));
 		spin_unlock(&init_mm.page_table_lock);
 
-		unmap_low_page(pmd);
 	}
 	__flush_tlb_all();
+	update_page_count(PG_LEVEL_1G, pages);
 
-	return last_map_addr >> PAGE_SHIFT;
+	return last_map_addr;
+}
+
+static unsigned long __meminit
+phys_pud_update(pgd_t *pgd, unsigned long addr, unsigned long end,
+		 unsigned long page_size_mask)
+{
+	pud_t *pud;
+
+	pud = (pud_t *)pgd_page_vaddr(*pgd);
+
+	return phys_pud_init(pud, addr, end, page_size_mask);
 }
 
 static void __init find_early_table_space(unsigned long end)
 {
-	unsigned long puds, pmds, tables, start;
+	unsigned long puds, pmds, ptes, tables, start;
 
 	puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
 	tables = round_up(puds * sizeof(pud_t), PAGE_SIZE);
-	if (!direct_gbpages) {
+	if (direct_gbpages) {
+		unsigned long extra;
+		extra = end - ((end>>PUD_SHIFT) << PUD_SHIFT);
+		pmds = (extra + PMD_SIZE - 1) >> PMD_SHIFT;
+	} else
 		pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
-		tables += round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
-	}
+	tables += round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
+
+	if (cpu_has_pse) {
+		unsigned long extra;
+		extra = end - ((end>>PMD_SHIFT) << PMD_SHIFT);
+		ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	} else
+		ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	tables += round_up(ptes * sizeof(pte_t), PAGE_SIZE);
 
 	/*
 	 * RED-PEN putting page tables only on node 0 could
@@ -417,10 +466,10 @@ static void __init find_early_table_space(unsigned long end)
 
 	table_start >>= PAGE_SHIFT;
 	table_end = table_start;
+	table_top = table_start + (tables >> PAGE_SHIFT);
 
-	early_printk("kernel direct mapping tables up to %lx @ %lx-%lx\n",
-		end, table_start << PAGE_SHIFT,
-		(table_start << PAGE_SHIFT) + tables);
+	printk(KERN_DEBUG "kernel direct mapping tables up to %lx @ %lx-%lx\n",
+		end, table_start << PAGE_SHIFT, table_top << PAGE_SHIFT);
 }
 
 static void __init init_gbpages(void)
@@ -431,126 +480,85 @@ static void __init init_gbpages(void)
 		direct_gbpages = 0;
 }
 
-#ifdef CONFIG_MEMTEST_BOOTPARAM
-
-static void __init memtest(unsigned long start_phys, unsigned long size,
-				 unsigned pattern)
-{
-	unsigned long i;
-	unsigned long *start;
-	unsigned long start_bad;
-	unsigned long last_bad;
-	unsigned long val;
-	unsigned long start_phys_aligned;
-	unsigned long count;
-	unsigned long incr;
-
-	switch (pattern) {
-	case 0:
-		val = 0UL;
-		break;
-	case 1:
-		val = -1UL;
-		break;
-	case 2:
-		val = 0x5555555555555555UL;
-		break;
-	case 3:
-		val = 0xaaaaaaaaaaaaaaaaUL;
-		break;
-	default:
-		return;
-	}
+static unsigned long __init kernel_physical_mapping_init(unsigned long start,
+						unsigned long end,
+						unsigned long page_size_mask)
+{
 
-	incr = sizeof(unsigned long);
-	start_phys_aligned = ALIGN(start_phys, incr);
-	count = (size - (start_phys_aligned - start_phys))/incr;
-	start = __va(start_phys_aligned);
-	start_bad = 0;
-	last_bad = 0;
-
-	for (i = 0; i < count; i++)
-		start[i] = val;
-	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
-		if (*start != val) {
-			if (start_phys_aligned == last_bad + incr) {
-				last_bad += incr;
-			} else {
-				if (start_bad) {
-					printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
-						val, start_bad, last_bad + incr);
-					reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
-				}
-				start_bad = last_bad = start_phys_aligned;
-			}
-		}
-	}
-	if (start_bad) {
-		printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
-			val, start_bad, last_bad + incr);
-		reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
-	}
+	unsigned long next, last_map_addr = end;
 
-}
+	start = (unsigned long)__va(start);
+	end = (unsigned long)__va(end);
 
-static int memtest_pattern __initdata = CONFIG_MEMTEST_BOOTPARAM_VALUE;
+	for (; start < end; start = next) {
+		pgd_t *pgd = pgd_offset_k(start);
+		unsigned long pud_phys;
+		pud_t *pud;
 
-static int __init parse_memtest(char *arg)
-{
-	if (arg)
-		memtest_pattern = simple_strtoul(arg, NULL, 0);
-	return 0;
-}
+		next = (start + PGDIR_SIZE) & PGDIR_MASK;
+		if (next > end)
+			next = end;
 
-early_param("memtest", parse_memtest);
+		if (pgd_val(*pgd)) {
+			last_map_addr = phys_pud_update(pgd, __pa(start),
+						 __pa(end), page_size_mask);
+			continue;
+		}
 
-static void __init early_memtest(unsigned long start, unsigned long end)
-{
-	u64 t_start, t_size;
-	unsigned pattern;
+		if (after_bootmem)
+			pud = pud_offset(pgd, start & PGDIR_MASK);
+		else
+			pud = alloc_low_page(&pud_phys);
 
-	if (!memtest_pattern)
-		return;
+		last_map_addr = phys_pud_init(pud, __pa(start), __pa(next),
+						 page_size_mask);
+		unmap_low_page(pud);
+		pgd_populate(&init_mm, pgd_offset_k(start),
+			     __va(pud_phys));
+	}
 
-	printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
-	for (pattern = 0; pattern < memtest_pattern; pattern++) {
-		t_start = start;
-		t_size = 0;
-		while (t_start < end) {
-			t_start = find_e820_area_size(t_start, &t_size, 1);
+	return last_map_addr;
+}
 
-			/* done ? */
-			if (t_start >= end)
-				break;
-			if (t_start + t_size > end)
-				t_size = end - t_start;
+struct map_range {
+	unsigned long start;
+	unsigned long end;
+	unsigned page_size_mask;
+};
 
-			printk(KERN_CONT "\n  %016llx - %016llx pattern %d",
-				(unsigned long long)t_start,
-				(unsigned long long)t_start + t_size, pattern);
+#define NR_RANGE_MR 5
 
-			memtest(t_start, t_size, pattern);
+static int save_mr(struct map_range *mr, int nr_range,
+		   unsigned long start_pfn, unsigned long end_pfn,
+		   unsigned long page_size_mask)
+{
 
-			t_start += t_size;
-		}
+	if (start_pfn < end_pfn) {
+		if (nr_range >= NR_RANGE_MR)
+			panic("run out of range for init_memory_mapping\n");
+		mr[nr_range].start = start_pfn<<PAGE_SHIFT;
+		mr[nr_range].end   = end_pfn<<PAGE_SHIFT;
+		mr[nr_range].page_size_mask = page_size_mask;
+		nr_range++;
 	}
-	printk(KERN_CONT "\n");
-}
-#else
-static void __init early_memtest(unsigned long start, unsigned long end)
-{
+
+	return nr_range;
 }
-#endif
 
 /*
  * Setup the direct mapping of the physical memory at PAGE_OFFSET.
  * This runs before bootmem is initialized and gets pages directly from
  * the physical memory. To access them they are temporarily mapped.
  */
-unsigned long __init_refok init_memory_mapping(unsigned long start, unsigned long end)
+unsigned long __init_refok init_memory_mapping(unsigned long start,
+					       unsigned long end)
 {
-	unsigned long next, last_map_addr = end;
-	unsigned long start_phys = start, end_phys = end;
+	unsigned long last_map_addr = 0;
+	unsigned long page_size_mask = 0;
+	unsigned long start_pfn, end_pfn;
+
+	struct map_range mr[NR_RANGE_MR];
+	int nr_range, i;
 
 	printk(KERN_INFO "init_memory_mapping\n");
 
@@ -561,48 +569,115 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, unsigned lon
 	 * memory mapped. Unfortunately this is done currently before the
 	 * nodes are discovered.
 	 */
-	if (!after_bootmem) {
+	if (!after_bootmem)
 		init_gbpages();
-		find_early_table_space(end);
-	}
 
-	start = (unsigned long)__va(start);
-	end = (unsigned long)__va(end);
+	if (direct_gbpages)
+		page_size_mask |= 1 << PG_LEVEL_1G;
+	if (cpu_has_pse)
+		page_size_mask |= 1 << PG_LEVEL_2M;
+
+	memset(mr, 0, sizeof(mr));
+	nr_range = 0;
+
+	/* head if not big page alignment ?*/
+	start_pfn = start >> PAGE_SHIFT;
+	end_pfn = ((start + (PMD_SIZE - 1)) >> PMD_SHIFT)
+			<< (PMD_SHIFT - PAGE_SHIFT);
+	nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
+
+	/* big page (2M) range*/
+	start_pfn = ((start + (PMD_SIZE - 1))>>PMD_SHIFT)
+			 << (PMD_SHIFT - PAGE_SHIFT);
+	end_pfn = ((start + (PUD_SIZE - 1))>>PUD_SHIFT)
+			 << (PUD_SHIFT - PAGE_SHIFT);
+	if (end_pfn > ((end>>PUD_SHIFT)<<(PUD_SHIFT - PAGE_SHIFT)))
+		end_pfn = ((end>>PUD_SHIFT)<<(PUD_SHIFT - PAGE_SHIFT));
+	nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
+			page_size_mask & (1<<PG_LEVEL_2M));
+
+	/* big page (1G) range */
+	start_pfn = end_pfn;
+	end_pfn = (end>>PUD_SHIFT) << (PUD_SHIFT - PAGE_SHIFT);
+	nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
+				page_size_mask &
+				 ((1<<PG_LEVEL_2M)|(1<<PG_LEVEL_1G)));
+
+	/* tail is not big page (1G) alignment */
+	start_pfn = end_pfn;
+	end_pfn = (end>>PMD_SHIFT) << (PMD_SHIFT - PAGE_SHIFT);
+	nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
+			page_size_mask & (1<<PG_LEVEL_2M));
+
+	/* tail is not big page (2M) alignment */
+	start_pfn = end_pfn;
+	end_pfn = end>>PAGE_SHIFT;
+	nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
+
+	/* try to merge same page size and continuous */
+	for (i = 0; nr_range > 1 && i < nr_range - 1; i++) {
+		unsigned long old_start;
+		if (mr[i].end != mr[i+1].start ||
+		    mr[i].page_size_mask != mr[i+1].page_size_mask)
+			continue;
+		/* move it */
+		old_start = mr[i].start;
+		memmove(&mr[i], &mr[i+1],
+			 (nr_range - 1 - i) * sizeof (struct map_range));
+		mr[i].start = old_start;
+		nr_range--;
+	}
 
-	for (; start < end; start = next) {
-		pgd_t *pgd = pgd_offset_k(start);
-		unsigned long pud_phys;
-		pud_t *pud;
+	for (i = 0; i < nr_range; i++)
+		printk(KERN_DEBUG " %010lx - %010lx page %s\n",
+				mr[i].start, mr[i].end,
+			(mr[i].page_size_mask & (1<<PG_LEVEL_1G))?"1G":(
+			 (mr[i].page_size_mask & (1<<PG_LEVEL_2M))?"2M":"4k"));
 
-		if (after_bootmem)
-			pud = pud_offset(pgd, start & PGDIR_MASK);
-		else
-			pud = alloc_low_page(&pud_phys);
+	if (!after_bootmem)
+		find_early_table_space(end);
 
-		next = start + PGDIR_SIZE;
-		if (next > end)
-			next = end;
-		last_map_addr = phys_pud_init(pud, __pa(start), __pa(next));
-		if (!after_bootmem)
-			set_pgd(pgd_offset_k(start), mk_kernel_pgd(pud_phys));
-		unmap_low_page(pud);
-	}
+	for (i = 0; i < nr_range; i++)
+		last_map_addr = kernel_physical_mapping_init(
+					mr[i].start, mr[i].end,
+					mr[i].page_size_mask);
 
 	if (!after_bootmem)
 		mmu_cr4_features = read_cr4();
 	__flush_tlb_all();
 
-	if (!after_bootmem)
+	if (!after_bootmem && table_end > table_start)
 		reserve_early(table_start << PAGE_SHIFT,
 				 table_end << PAGE_SHIFT, "PGTABLE");
 
+	printk(KERN_INFO "last_map_addr: %lx end: %lx\n",
+			 last_map_addr, end);
+
 	if (!after_bootmem)
-		early_memtest(start_phys, end_phys);
+		early_memtest(start, end);
 
-	return last_map_addr;
+	return last_map_addr >> PAGE_SHIFT;
 }
 
 #ifndef CONFIG_NUMA
+void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn)
+{
+	unsigned long bootmap_size, bootmap;
+
+	bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
+	bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size,
+				 PAGE_SIZE);
+	if (bootmap == -1L)
+		panic("Cannot find bootmem map of size %ld\n", bootmap_size);
+	/* don't touch min_low_pfn */
+	bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap >> PAGE_SHIFT,
+					 0, end_pfn);
+	e820_register_active_regions(0, start_pfn, end_pfn);
+	free_bootmem_with_active_regions(0, end_pfn);
+	early_res_to_bootmem(0, end_pfn<<PAGE_SHIFT);
+	reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
+}
+
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
@@ -610,9 +685,9 @@ void __init paging_init(void)
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 	max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
 	max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
-	max_zone_pfns[ZONE_NORMAL] = end_pfn;
+	max_zone_pfns[ZONE_NORMAL] = max_pfn;
 
-	memory_present(0, 0, end_pfn);
+	memory_present(0, 0, max_pfn);
 	sparse_init();
 	free_area_init_nodes(max_zone_pfns);
 }
@@ -694,8 +769,8 @@ void __init mem_init(void)
 #else
 	totalram_pages = free_all_bootmem();
 #endif
-	reservedpages = end_pfn - totalram_pages -
-					absent_pages_in_range(0, end_pfn);
+	reservedpages = max_pfn - totalram_pages -
+					absent_pages_in_range(0, max_pfn);
 	after_bootmem = 1;
 
 	codesize =  (unsigned long) &_etext - (unsigned long) &_text;
@@ -714,7 +789,7 @@ void __init mem_init(void)
 	printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
 				"%ldk reserved, %ldk data, %ldk init)\n",
 		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-		end_pfn << (PAGE_SHIFT-10),
+		max_pfn << (PAGE_SHIFT-10),
 		codesize >> 10,
 		reservedpages << (PAGE_SHIFT-10),
 		datasize >> 10,
@@ -767,6 +842,13 @@ EXPORT_SYMBOL_GPL(rodata_test_data);
 void mark_rodata_ro(void)
 {
 	unsigned long start = PFN_ALIGN(_stext), end = PFN_ALIGN(__end_rodata);
+	unsigned long rodata_start =
+		((unsigned long)__start_rodata + PAGE_SIZE - 1) & PAGE_MASK;
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+	/* Dynamic tracing modifies the kernel text section */
+	start = rodata_start;
+#endif
 
 	printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
 	       (end - start) >> 10);
@@ -776,8 +858,7 @@ void mark_rodata_ro(void)
 	 * The rodata section (but not the kernel text!) should also be
 	 * not-executable.
 	 */
-	start = ((unsigned long)__start_rodata + PAGE_SIZE - 1) & PAGE_MASK;
-	set_memory_nx(start, (end - start) >> PAGE_SHIFT);
+	set_memory_nx(rodata_start, (end - rodata_start) >> PAGE_SHIFT);
 
 	rodata_test();
 
@@ -799,24 +880,26 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void __init reserve_bootmem_generic(unsigned long phys, unsigned len)
+int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
+				   int flags)
 {
 #ifdef CONFIG_NUMA
 	int nid, next_nid;
+	int ret;
 #endif
 	unsigned long pfn = phys >> PAGE_SHIFT;
 
-	if (pfn >= end_pfn) {
+	if (pfn >= max_pfn) {
 		/*
 		 * This can happen with kdump kernels when accessing
 		 * firmware tables:
 		 */
 		if (pfn < max_pfn_mapped)
-			return;
+			return -EFAULT;
 
-		printk(KERN_ERR "reserve_bootmem: illegal reserve %lx %u\n",
+		printk(KERN_ERR "reserve_bootmem: illegal reserve %lx %lu\n",
 				phys, len);
-		return;
+		return -EFAULT;
 	}
 
 	/* Should check here against the e820 map to avoid double free */
@@ -824,9 +907,13 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len)
 	nid = phys_to_nid(phys);
 	next_nid = phys_to_nid(phys + len - 1);
 	if (nid == next_nid)
-		reserve_bootmem_node(NODE_DATA(nid), phys, len, BOOTMEM_DEFAULT);
+		ret = reserve_bootmem_node(NODE_DATA(nid), phys, len, flags);
 	else
-		reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+		ret = reserve_bootmem(phys, len, flags);
+
+	if (ret != 0)
+		return ret;
+
 #else
 	reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
 #endif
@@ -835,6 +922,8 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len)
 		dma_reserve += len / PAGE_SIZE;
 		set_dma_reserve(dma_reserve);
 	}
+
+	return 0;
 }
 
 int kern_addr_valid(unsigned long addr)
@@ -939,7 +1028,7 @@ vmemmap_populate(struct page *start_page, unsigned long size, int node)
 	pmd_t *pmd;
 
 	for (; addr < end; addr = next) {
-		next = pmd_addr_end(addr, end);
+		void *p = NULL;
 
 		pgd = vmemmap_pgd_populate(addr, node);
 		if (!pgd)
@@ -949,33 +1038,51 @@ vmemmap_populate(struct page *start_page, unsigned long size, int node)
 		if (!pud)
 			return -ENOMEM;
 
-		pmd = pmd_offset(pud, addr);
-		if (pmd_none(*pmd)) {
-			pte_t entry;
-			void *p;
+		if (!cpu_has_pse) {
+			next = (addr + PAGE_SIZE) & PAGE_MASK;
+			pmd = vmemmap_pmd_populate(pud, addr, node);
+
+			if (!pmd)
+				return -ENOMEM;
+
+			p = vmemmap_pte_populate(pmd, addr, node);
 
-			p = vmemmap_alloc_block(PMD_SIZE, node);
 			if (!p)
 				return -ENOMEM;
 
-			entry = pfn_pte(__pa(p) >> PAGE_SHIFT,
-							PAGE_KERNEL_LARGE);
-			set_pmd(pmd, __pmd(pte_val(entry)));
-
-			/* check to see if we have contiguous blocks */
-			if (p_end != p || node_start != node) {
-				if (p_start)
-					printk(KERN_DEBUG " [%lx-%lx] PMD -> [%p-%p] on node %d\n",
-						addr_start, addr_end-1, p_start, p_end-1, node_start);
-				addr_start = addr;
-				node_start = node;
-				p_start = p;
-			}
-			addr_end = addr + PMD_SIZE;
-			p_end = p + PMD_SIZE;
+			addr_end = addr + PAGE_SIZE;
+			p_end = p + PAGE_SIZE;
 		} else {
-			vmemmap_verify((pte_t *)pmd, node, addr, next);
+			next = pmd_addr_end(addr, end);
+
+			pmd = pmd_offset(pud, addr);
+			if (pmd_none(*pmd)) {
+				pte_t entry;
+
+				p = vmemmap_alloc_block(PMD_SIZE, node);
+				if (!p)
+					return -ENOMEM;
+
+				entry = pfn_pte(__pa(p) >> PAGE_SHIFT,
+						PAGE_KERNEL_LARGE);
+				set_pmd(pmd, __pmd(pte_val(entry)));
+
+				/* check to see if we have contiguous blocks */
+				if (p_end != p || node_start != node) {
+					if (p_start)
+						printk(KERN_DEBUG " [%lx-%lx] PMD -> [%p-%p] on node %d\n",
+						       addr_start, addr_end-1, p_start, p_end-1, node_start);
+					addr_start = addr;
+					node_start = node;
+					p_start = p;
+				}
+
+				addr_end = addr + PMD_SIZE;
+				p_end = p + PMD_SIZE;
+			} else
+				vmemmap_verify((pte_t *)pmd, node, addr, next);
 		}
+
 	}
 	return 0;
 }
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index d1b867101e5f..016f335bbeea 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/mmiotrace.h>
 
 #include <asm/cacheflush.h>
 #include <asm/e820.h>
@@ -122,10 +123,13 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 {
 	unsigned long pfn, offset, vaddr;
 	resource_size_t last_addr;
+	const resource_size_t unaligned_phys_addr = phys_addr;
+	const unsigned long unaligned_size = size;
 	struct vm_struct *area;
 	unsigned long new_prot_val;
 	pgprot_t prot;
 	int retval;
+	void __iomem *ret_addr;
 
 	/* Don't allow wraparound or zero size */
 	last_addr = phys_addr + size - 1;
@@ -142,7 +146,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	/*
 	 * Don't remap the low PCI/ISA area, it's always mapped..
 	 */
-	if (phys_addr >= ISA_START_ADDRESS && last_addr < ISA_END_ADDRESS)
+	if (is_ISA_range(phys_addr, last_addr))
 		return (__force void __iomem *)phys_to_virt(phys_addr);
 
 	/*
@@ -233,7 +237,10 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 		return NULL;
 	}
 
-	return (void __iomem *) (vaddr + offset);
+	ret_addr = (void __iomem *) (vaddr + offset);
+	mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr);
+
+	return ret_addr;
 }
 
 /**
@@ -261,7 +268,7 @@ void __iomem *ioremap_nocache(resource_size_t phys_addr, unsigned long size)
 {
 	/*
 	 * Ideally, this should be:
-	 *	pat_wc_enabled ? _PAGE_CACHE_UC : _PAGE_CACHE_UC_MINUS;
+	 *	pat_enabled ? _PAGE_CACHE_UC : _PAGE_CACHE_UC_MINUS;
 	 *
 	 * Till we fix all X drivers to use ioremap_wc(), we will use
 	 * UC MINUS.
@@ -285,7 +292,7 @@ EXPORT_SYMBOL(ioremap_nocache);
  */
 void __iomem *ioremap_wc(unsigned long phys_addr, unsigned long size)
 {
-	if (pat_wc_enabled)
+	if (pat_enabled)
 		return __ioremap_caller(phys_addr, size, _PAGE_CACHE_WC,
 					__builtin_return_address(0));
 	else
@@ -323,6 +330,14 @@ static void __iomem *ioremap_default(resource_size_t phys_addr,
 	return (void __iomem *)ret;
 }
 
+void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
+				unsigned long prot_val)
+{
+	return __ioremap_caller(phys_addr, size, (prot_val & _PAGE_CACHE_MASK),
+				__builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_prot);
+
 /**
  * iounmap - Free a IO remapping
  * @addr: virtual address from ioremap_*
@@ -341,13 +356,15 @@ void iounmap(volatile void __iomem *addr)
 	 * vm_area and by simply returning an address into the kernel mapping
 	 * of ISA space.   So handle that here.
 	 */
-	if (addr >= phys_to_virt(ISA_START_ADDRESS) &&
-	    addr < phys_to_virt(ISA_END_ADDRESS))
+	if ((void __force *)addr >= phys_to_virt(ISA_START_ADDRESS) &&
+	    (void __force *)addr < phys_to_virt(ISA_END_ADDRESS))
 		return;
 
 	addr = (volatile void __iomem *)
 		(PAGE_MASK & (unsigned long __force)addr);
 
+	mmiotrace_iounmap(addr);
+
 	/* Use the vm area unlocked, assuming the caller
 	   ensures there isn't another iounmap for the same address
 	   in parallel. Reuse of the virtual address is prevented by
@@ -355,7 +372,7 @@ void iounmap(volatile void __iomem *addr)
 	   cpa takes care of the direct mappings. */
 	read_lock(&vmlist_lock);
 	for (p = vmlist; p; p = p->next) {
-		if (p->addr == addr)
+		if (p->addr == (void __force *)addr)
 			break;
 	}
 	read_unlock(&vmlist_lock);
@@ -369,7 +386,7 @@ void iounmap(volatile void __iomem *addr)
 	free_memtype(p->phys_addr, p->phys_addr + get_vm_area_size(p));
 
 	/* Finally remove it */
-	o = remove_vm_area((void *)addr);
+	o = remove_vm_area((void __force *)addr);
 	BUG_ON(p != o || o == NULL);
 	kfree(p);
 }
@@ -388,7 +405,7 @@ void *xlate_dev_mem_ptr(unsigned long phys)
 	if (page_is_ram(start >> PAGE_SHIFT))
 		return __va(phys);
 
-	addr = (void *)ioremap_default(start, PAGE_SIZE);
+	addr = (void __force *)ioremap_default(start, PAGE_SIZE);
 	if (addr)
 		addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
 
@@ -404,8 +421,6 @@ void unxlate_dev_mem_ptr(unsigned long phys, void *addr)
 	return;
 }
 
-#ifdef CONFIG_X86_32
-
 int __initdata early_ioremap_debug;
 
 static int __init early_ioremap_debug_setup(char *str)
@@ -417,8 +432,7 @@ static int __init early_ioremap_debug_setup(char *str)
 early_param("early_ioremap_debug", early_ioremap_debug_setup);
 
 static __initdata int after_paging_init;
-static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)]
-		__section(.bss.page_aligned);
+static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)] __page_aligned_bss;
 
 static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
 {
@@ -507,10 +521,11 @@ static void __init __early_set_fixmap(enum fixed_addresses idx,
 		return;
 	}
 	pte = early_ioremap_pte(addr);
+
 	if (pgprot_val(flags))
 		set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, flags));
 	else
-		pte_clear(NULL, addr, pte);
+		pte_clear(&init_mm, addr, pte);
 	__flush_tlb_one(addr);
 }
 
@@ -648,5 +663,3 @@ void __this_fixmap_does_not_exist(void)
 {
 	WARN_ON(1);
 }
-
-#endif /* CONFIG_X86_32 */
diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c
index 1f476e477844..41f1b5c00a1d 100644
--- a/arch/x86/mm/k8topology_64.c
+++ b/arch/x86/mm/k8topology_64.c
@@ -22,6 +22,7 @@
 #include <asm/numa.h>
 #include <asm/mpspec.h>
 #include <asm/apic.h>
+#include <asm/k8.h>
 
 static __init int find_northbridge(void)
 {
@@ -56,34 +57,33 @@ static __init void early_get_boot_cpu_id(void)
 	/*
 	 * Find possible boot-time SMP configuration:
 	 */
+#ifdef CONFIG_X86_MPPARSE
 	early_find_smp_config();
+#endif
 #ifdef CONFIG_ACPI
 	/*
 	 * Read APIC information from ACPI tables.
 	 */
 	early_acpi_boot_init();
 #endif
+#ifdef CONFIG_X86_MPPARSE
 	/*
 	 * get boot-time SMP configuration:
 	 */
 	if (smp_found_config)
 		early_get_smp_config();
+#endif
 	early_init_lapic_mapping();
 }
 
 int __init k8_scan_nodes(unsigned long start, unsigned long end)
 {
+	unsigned numnodes, cores, bits, apicid_base;
 	unsigned long prevbase;
 	struct bootnode nodes[8];
-	int nodeid, i, nb;
 	unsigned char nodeids[8];
-	int found = 0;
-	u32 reg;
-	unsigned numnodes;
-	unsigned cores;
-	unsigned bits;
-	int j;
-	unsigned apicid_base;
+	int i, j, nb, found = 0;
+	u32 nodeid, reg;
 
 	if (!early_pci_allowed())
 		return -1;
@@ -105,7 +105,6 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 	prevbase = 0;
 	for (i = 0; i < 8; i++) {
 		unsigned long base, limit;
-		u32 nodeid;
 
 		base = read_pci_config(0, nb, 1, 0x40 + i*8);
 		limit = read_pci_config(0, nb, 1, 0x44 + i*8);
@@ -144,8 +143,8 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 		limit |= (1<<24)-1;
 		limit++;
 
-		if (limit > end_pfn << PAGE_SHIFT)
-			limit = end_pfn << PAGE_SHIFT;
+		if (limit > max_pfn << PAGE_SHIFT)
+			limit = max_pfn << PAGE_SHIFT;
 		if (limit <= base)
 			continue;
 
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
new file mode 100644
index 000000000000..93d82038af4b
--- /dev/null
+++ b/arch/x86/mm/kmmio.c
@@ -0,0 +1,510 @@
+/* Support for MMIO probes.
+ * Benfit many code from kprobes
+ * (C) 2002 Louis Zhuang <louis.zhuang@intel.com>.
+ *     2007 Alexander Eichner
+ *     2008 Pekka Paalanen <pq@iki.fi>
+ */
+
+#include <linux/list.h>
+#include <linux/rculist.h>
+#include <linux/spinlock.h>
+#include <linux/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/uaccess.h>
+#include <linux/ptrace.h>
+#include <linux/preempt.h>
+#include <linux/percpu.h>
+#include <linux/kdebug.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <linux/errno.h>
+#include <asm/debugreg.h>
+#include <linux/mmiotrace.h>
+
+#define KMMIO_PAGE_HASH_BITS 4
+#define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS)
+
+struct kmmio_fault_page {
+	struct list_head list;
+	struct kmmio_fault_page *release_next;
+	unsigned long page; /* location of the fault page */
+
+	/*
+	 * Number of times this page has been registered as a part
+	 * of a probe. If zero, page is disarmed and this may be freed.
+	 * Used only by writers (RCU).
+	 */
+	int count;
+};
+
+struct kmmio_delayed_release {
+	struct rcu_head rcu;
+	struct kmmio_fault_page *release_list;
+};
+
+struct kmmio_context {
+	struct kmmio_fault_page *fpage;
+	struct kmmio_probe *probe;
+	unsigned long saved_flags;
+	unsigned long addr;
+	int active;
+};
+
+static DEFINE_SPINLOCK(kmmio_lock);
+
+/* Protected by kmmio_lock */
+unsigned int kmmio_count;
+
+/* Read-protected by RCU, write-protected by kmmio_lock. */
+static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE];
+static LIST_HEAD(kmmio_probes);
+
+static struct list_head *kmmio_page_list(unsigned long page)
+{
+	return &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)];
+}
+
+/* Accessed per-cpu */
+static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx);
+
+/*
+ * this is basically a dynamic stabbing problem:
+ * Could use the existing prio tree code or
+ * Possible better implementations:
+ * The Interval Skip List: A Data Structure for Finding All Intervals That
+ * Overlap a Point (might be simple)
+ * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup
+ */
+/* Get the kmmio at this addr (if any). You must be holding RCU read lock. */
+static struct kmmio_probe *get_kmmio_probe(unsigned long addr)
+{
+	struct kmmio_probe *p;
+	list_for_each_entry_rcu(p, &kmmio_probes, list) {
+		if (addr >= p->addr && addr <= (p->addr + p->len))
+			return p;
+	}
+	return NULL;
+}
+
+/* You must be holding RCU read lock. */
+static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page)
+{
+	struct list_head *head;
+	struct kmmio_fault_page *p;
+
+	page &= PAGE_MASK;
+	head = kmmio_page_list(page);
+	list_for_each_entry_rcu(p, head, list) {
+		if (p->page == page)
+			return p;
+	}
+	return NULL;
+}
+
+static void set_page_present(unsigned long addr, bool present,
+							unsigned int *pglevel)
+{
+	pteval_t pteval;
+	pmdval_t pmdval;
+	unsigned int level;
+	pmd_t *pmd;
+	pte_t *pte = lookup_address(addr, &level);
+
+	if (!pte) {
+		pr_err("kmmio: no pte for page 0x%08lx\n", addr);
+		return;
+	}
+
+	if (pglevel)
+		*pglevel = level;
+
+	switch (level) {
+	case PG_LEVEL_2M:
+		pmd = (pmd_t *)pte;
+		pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT;
+		if (present)
+			pmdval |= _PAGE_PRESENT;
+		set_pmd(pmd, __pmd(pmdval));
+		break;
+
+	case PG_LEVEL_4K:
+		pteval = pte_val(*pte) & ~_PAGE_PRESENT;
+		if (present)
+			pteval |= _PAGE_PRESENT;
+		set_pte_atomic(pte, __pte(pteval));
+		break;
+
+	default:
+		pr_err("kmmio: unexpected page level 0x%x.\n", level);
+		return;
+	}
+
+	__flush_tlb_one(addr);
+}
+
+/** Mark the given page as not present. Access to it will trigger a fault. */
+static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+{
+	set_page_present(page & PAGE_MASK, false, pglevel);
+}
+
+/** Mark the given page as present. */
+static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+{
+	set_page_present(page & PAGE_MASK, true, pglevel);
+}
+
+/*
+ * This is being called from do_page_fault().
+ *
+ * We may be in an interrupt or a critical section. Also prefecthing may
+ * trigger a page fault. We may be in the middle of process switch.
+ * We cannot take any locks, because we could be executing especially
+ * within a kmmio critical section.
+ *
+ * Local interrupts are disabled, so preemption cannot happen.
+ * Do not enable interrupts, do not sleep, and watch out for other CPUs.
+ */
+/*
+ * Interrupts are disabled on entry as trap3 is an interrupt gate
+ * and they remain disabled thorough out this function.
+ */
+int kmmio_handler(struct pt_regs *regs, unsigned long addr)
+{
+	struct kmmio_context *ctx;
+	struct kmmio_fault_page *faultpage;
+	int ret = 0; /* default to fault not handled */
+
+	/*
+	 * Preemption is now disabled to prevent process switch during
+	 * single stepping. We can only handle one active kmmio trace
+	 * per cpu, so ensure that we finish it before something else
+	 * gets to run. We also hold the RCU read lock over single
+	 * stepping to avoid looking up the probe and kmmio_fault_page
+	 * again.
+	 */
+	preempt_disable();
+	rcu_read_lock();
+
+	faultpage = get_kmmio_fault_page(addr);
+	if (!faultpage) {
+		/*
+		 * Either this page fault is not caused by kmmio, or
+		 * another CPU just pulled the kmmio probe from under
+		 * our feet. The latter case should not be possible.
+		 */
+		goto no_kmmio;
+	}
+
+	ctx = &get_cpu_var(kmmio_ctx);
+	if (ctx->active) {
+		disarm_kmmio_fault_page(faultpage->page, NULL);
+		if (addr == ctx->addr) {
+			/*
+			 * On SMP we sometimes get recursive probe hits on the
+			 * same address. Context is already saved, fall out.
+			 */
+			pr_debug("kmmio: duplicate probe hit on CPU %d, for "
+						"address 0x%08lx.\n",
+						smp_processor_id(), addr);
+			ret = 1;
+			goto no_kmmio_ctx;
+		}
+		/*
+		 * Prevent overwriting already in-flight context.
+		 * This should not happen, let's hope disarming at least
+		 * prevents a panic.
+		 */
+		pr_emerg("kmmio: recursive probe hit on CPU %d, "
+					"for address 0x%08lx. Ignoring.\n",
+					smp_processor_id(), addr);
+		pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
+					ctx->addr);
+		goto no_kmmio_ctx;
+	}
+	ctx->active++;
+
+	ctx->fpage = faultpage;
+	ctx->probe = get_kmmio_probe(addr);
+	ctx->saved_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
+	ctx->addr = addr;
+
+	if (ctx->probe && ctx->probe->pre_handler)
+		ctx->probe->pre_handler(ctx->probe, regs, addr);
+
+	/*
+	 * Enable single-stepping and disable interrupts for the faulting
+	 * context. Local interrupts must not get enabled during stepping.
+	 */
+	regs->flags |= X86_EFLAGS_TF;
+	regs->flags &= ~X86_EFLAGS_IF;
+
+	/* Now we set present bit in PTE and single step. */
+	disarm_kmmio_fault_page(ctx->fpage->page, NULL);
+
+	/*
+	 * If another cpu accesses the same page while we are stepping,
+	 * the access will not be caught. It will simply succeed and the
+	 * only downside is we lose the event. If this becomes a problem,
+	 * the user should drop to single cpu before tracing.
+	 */
+
+	put_cpu_var(kmmio_ctx);
+	return 1; /* fault handled */
+
+no_kmmio_ctx:
+	put_cpu_var(kmmio_ctx);
+no_kmmio:
+	rcu_read_unlock();
+	preempt_enable_no_resched();
+	return ret;
+}
+
+/*
+ * Interrupts are disabled on entry as trap1 is an interrupt gate
+ * and they remain disabled thorough out this function.
+ * This must always get called as the pair to kmmio_handler().
+ */
+static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
+{
+	int ret = 0;
+	struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
+
+	if (!ctx->active) {
+		pr_debug("kmmio: spurious debug trap on CPU %d.\n",
+							smp_processor_id());
+		goto out;
+	}
+
+	if (ctx->probe && ctx->probe->post_handler)
+		ctx->probe->post_handler(ctx->probe, condition, regs);
+
+	arm_kmmio_fault_page(ctx->fpage->page, NULL);
+
+	regs->flags &= ~X86_EFLAGS_TF;
+	regs->flags |= ctx->saved_flags;
+
+	/* These were acquired in kmmio_handler(). */
+	ctx->active--;
+	BUG_ON(ctx->active);
+	rcu_read_unlock();
+	preempt_enable_no_resched();
+
+	/*
+	 * if somebody else is singlestepping across a probe point, flags
+	 * will have TF set, in which case, continue the remaining processing
+	 * of do_debug, as if this is not a probe hit.
+	 */
+	if (!(regs->flags & X86_EFLAGS_TF))
+		ret = 1;
+out:
+	put_cpu_var(kmmio_ctx);
+	return ret;
+}
+
+/* You must be holding kmmio_lock. */
+static int add_kmmio_fault_page(unsigned long page)
+{
+	struct kmmio_fault_page *f;
+
+	page &= PAGE_MASK;
+	f = get_kmmio_fault_page(page);
+	if (f) {
+		if (!f->count)
+			arm_kmmio_fault_page(f->page, NULL);
+		f->count++;
+		return 0;
+	}
+
+	f = kmalloc(sizeof(*f), GFP_ATOMIC);
+	if (!f)
+		return -1;
+
+	f->count = 1;
+	f->page = page;
+	list_add_rcu(&f->list, kmmio_page_list(f->page));
+
+	arm_kmmio_fault_page(f->page, NULL);
+
+	return 0;
+}
+
+/* You must be holding kmmio_lock. */
+static void release_kmmio_fault_page(unsigned long page,
+				struct kmmio_fault_page **release_list)
+{
+	struct kmmio_fault_page *f;
+
+	page &= PAGE_MASK;
+	f = get_kmmio_fault_page(page);
+	if (!f)
+		return;
+
+	f->count--;
+	BUG_ON(f->count < 0);
+	if (!f->count) {
+		disarm_kmmio_fault_page(f->page, NULL);
+		f->release_next = *release_list;
+		*release_list = f;
+	}
+}
+
+/*
+ * With page-unaligned ioremaps, one or two armed pages may contain
+ * addresses from outside the intended mapping. Events for these addresses
+ * are currently silently dropped. The events may result only from programming
+ * mistakes by accessing addresses before the beginning or past the end of a
+ * mapping.
+ */
+int register_kmmio_probe(struct kmmio_probe *p)
+{
+	unsigned long flags;
+	int ret = 0;
+	unsigned long size = 0;
+	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
+
+	spin_lock_irqsave(&kmmio_lock, flags);
+	if (get_kmmio_probe(p->addr)) {
+		ret = -EEXIST;
+		goto out;
+	}
+	kmmio_count++;
+	list_add_rcu(&p->list, &kmmio_probes);
+	while (size < size_lim) {
+		if (add_kmmio_fault_page(p->addr + size))
+			pr_err("kmmio: Unable to set page fault.\n");
+		size += PAGE_SIZE;
+	}
+out:
+	spin_unlock_irqrestore(&kmmio_lock, flags);
+	/*
+	 * XXX: What should I do here?
+	 * Here was a call to global_flush_tlb(), but it does not exist
+	 * anymore. It seems it's not needed after all.
+	 */
+	return ret;
+}
+EXPORT_SYMBOL(register_kmmio_probe);
+
+static void rcu_free_kmmio_fault_pages(struct rcu_head *head)
+{
+	struct kmmio_delayed_release *dr = container_of(
+						head,
+						struct kmmio_delayed_release,
+						rcu);
+	struct kmmio_fault_page *p = dr->release_list;
+	while (p) {
+		struct kmmio_fault_page *next = p->release_next;
+		BUG_ON(p->count);
+		kfree(p);
+		p = next;
+	}
+	kfree(dr);
+}
+
+static void remove_kmmio_fault_pages(struct rcu_head *head)
+{
+	struct kmmio_delayed_release *dr = container_of(
+						head,
+						struct kmmio_delayed_release,
+						rcu);
+	struct kmmio_fault_page *p = dr->release_list;
+	struct kmmio_fault_page **prevp = &dr->release_list;
+	unsigned long flags;
+	spin_lock_irqsave(&kmmio_lock, flags);
+	while (p) {
+		if (!p->count)
+			list_del_rcu(&p->list);
+		else
+			*prevp = p->release_next;
+		prevp = &p->release_next;
+		p = p->release_next;
+	}
+	spin_unlock_irqrestore(&kmmio_lock, flags);
+	/* This is the real RCU destroy call. */
+	call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages);
+}
+
+/*
+ * Remove a kmmio probe. You have to synchronize_rcu() before you can be
+ * sure that the callbacks will not be called anymore. Only after that
+ * you may actually release your struct kmmio_probe.
+ *
+ * Unregistering a kmmio fault page has three steps:
+ * 1. release_kmmio_fault_page()
+ *    Disarm the page, wait a grace period to let all faults finish.
+ * 2. remove_kmmio_fault_pages()
+ *    Remove the pages from kmmio_page_table.
+ * 3. rcu_free_kmmio_fault_pages()
+ *    Actally free the kmmio_fault_page structs as with RCU.
+ */
+void unregister_kmmio_probe(struct kmmio_probe *p)
+{
+	unsigned long flags;
+	unsigned long size = 0;
+	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
+	struct kmmio_fault_page *release_list = NULL;
+	struct kmmio_delayed_release *drelease;
+
+	spin_lock_irqsave(&kmmio_lock, flags);
+	while (size < size_lim) {
+		release_kmmio_fault_page(p->addr + size, &release_list);
+		size += PAGE_SIZE;
+	}
+	list_del_rcu(&p->list);
+	kmmio_count--;
+	spin_unlock_irqrestore(&kmmio_lock, flags);
+
+	drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC);
+	if (!drelease) {
+		pr_crit("kmmio: leaking kmmio_fault_page objects.\n");
+		return;
+	}
+	drelease->release_list = release_list;
+
+	/*
+	 * This is not really RCU here. We have just disarmed a set of
+	 * pages so that they cannot trigger page faults anymore. However,
+	 * we cannot remove the pages from kmmio_page_table,
+	 * because a probe hit might be in flight on another CPU. The
+	 * pages are collected into a list, and they will be removed from
+	 * kmmio_page_table when it is certain that no probe hit related to
+	 * these pages can be in flight. RCU grace period sounds like a
+	 * good choice.
+	 *
+	 * If we removed the pages too early, kmmio page fault handler might
+	 * not find the respective kmmio_fault_page and determine it's not
+	 * a kmmio fault, when it actually is. This would lead to madness.
+	 */
+	call_rcu(&drelease->rcu, remove_kmmio_fault_pages);
+}
+EXPORT_SYMBOL(unregister_kmmio_probe);
+
+static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val,
+								void *args)
+{
+	struct die_args *arg = args;
+
+	if (val == DIE_DEBUG && (arg->err & DR_STEP))
+		if (post_kmmio_handler(arg->err, arg->regs) == 1)
+			return NOTIFY_STOP;
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block nb_die = {
+	.notifier_call = kmmio_die_notifier
+};
+
+static int __init init_kmmio(void)
+{
+	int i;
+	for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++)
+		INIT_LIST_HEAD(&kmmio_page_table[i]);
+	return register_die_notifier(&nb_die);
+}
+fs_initcall(init_kmmio); /* should be before device_initcall() */
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
new file mode 100644
index 000000000000..672e17f8262a
--- /dev/null
+++ b/arch/x86/mm/memtest.c
@@ -0,0 +1,123 @@
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/pfn.h>
+
+#include <asm/e820.h>
+
+static void __init memtest(unsigned long start_phys, unsigned long size,
+				 unsigned pattern)
+{
+	unsigned long i;
+	unsigned long *start;
+	unsigned long start_bad;
+	unsigned long last_bad;
+	unsigned long val;
+	unsigned long start_phys_aligned;
+	unsigned long count;
+	unsigned long incr;
+
+	switch (pattern) {
+	case 0:
+		val = 0UL;
+		break;
+	case 1:
+		val = -1UL;
+		break;
+	case 2:
+#ifdef CONFIG_X86_64
+		val = 0x5555555555555555UL;
+#else
+		val = 0x55555555UL;
+#endif
+		break;
+	case 3:
+#ifdef CONFIG_X86_64
+		val = 0xaaaaaaaaaaaaaaaaUL;
+#else
+		val = 0xaaaaaaaaUL;
+#endif
+		break;
+	default:
+		return;
+	}
+
+	incr = sizeof(unsigned long);
+	start_phys_aligned = ALIGN(start_phys, incr);
+	count = (size - (start_phys_aligned - start_phys))/incr;
+	start = __va(start_phys_aligned);
+	start_bad = 0;
+	last_bad = 0;
+
+	for (i = 0; i < count; i++)
+		start[i] = val;
+	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
+		if (*start != val) {
+			if (start_phys_aligned == last_bad + incr) {
+				last_bad += incr;
+			} else {
+				if (start_bad) {
+					printk(KERN_CONT "\n  %010lx bad mem addr %010lx - %010lx reserved",
+						val, start_bad, last_bad + incr);
+					reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+				}
+				start_bad = last_bad = start_phys_aligned;
+			}
+		}
+	}
+	if (start_bad) {
+		printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
+			val, start_bad, last_bad + incr);
+		reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+	}
+
+}
+
+/* default is disabled */
+static int memtest_pattern __initdata;
+
+static int __init parse_memtest(char *arg)
+{
+	if (arg)
+		memtest_pattern = simple_strtoul(arg, NULL, 0);
+	return 0;
+}
+
+early_param("memtest", parse_memtest);
+
+void __init early_memtest(unsigned long start, unsigned long end)
+{
+	u64 t_start, t_size;
+	unsigned pattern;
+
+	if (!memtest_pattern)
+		return;
+
+	printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
+	for (pattern = 0; pattern < memtest_pattern; pattern++) {
+		t_start = start;
+		t_size = 0;
+		while (t_start < end) {
+			t_start = find_e820_area_size(t_start, &t_size, 1);
+
+			/* done ? */
+			if (t_start >= end)
+				break;
+			if (t_start + t_size > end)
+				t_size = end - t_start;
+
+			printk(KERN_CONT "\n  %010llx - %010llx pattern %d",
+				(unsigned long long)t_start,
+				(unsigned long long)t_start + t_size, pattern);
+
+			memtest(t_start, t_size, pattern);
+
+			t_start += t_size;
+		}
+	}
+	printk(KERN_CONT "\n");
+}
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
new file mode 100644
index 000000000000..e7397e108beb
--- /dev/null
+++ b/arch/x86/mm/mmio-mod.c
@@ -0,0 +1,515 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2005
+ *               Jeff Muizelaar, 2006, 2007
+ *               Pekka Paalanen, 2008 <pq@iki.fi>
+ *
+ * Derived from the read-mod example from relay-examples by Tom Zanussi.
+ */
+#define DEBUG 1
+
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <linux/kallsyms.h>
+#include <asm/pgtable.h>
+#include <linux/mmiotrace.h>
+#include <asm/e820.h> /* for ISA_START_ADDRESS */
+#include <asm/atomic.h>
+#include <linux/percpu.h>
+#include <linux/cpu.h>
+
+#include "pf_in.h"
+
+#define NAME "mmiotrace: "
+
+struct trap_reason {
+	unsigned long addr;
+	unsigned long ip;
+	enum reason_type type;
+	int active_traces;
+};
+
+struct remap_trace {
+	struct list_head list;
+	struct kmmio_probe probe;
+	resource_size_t phys;
+	unsigned long id;
+};
+
+/* Accessed per-cpu. */
+static DEFINE_PER_CPU(struct trap_reason, pf_reason);
+static DEFINE_PER_CPU(struct mmiotrace_rw, cpu_trace);
+
+#if 0 /* XXX: no way gather this info anymore */
+/* Access to this is not per-cpu. */
+static DEFINE_PER_CPU(atomic_t, dropped);
+#endif
+
+static struct dentry *marker_file;
+
+static DEFINE_MUTEX(mmiotrace_mutex);
+static DEFINE_SPINLOCK(trace_lock);
+static atomic_t mmiotrace_enabled;
+static LIST_HEAD(trace_list);		/* struct remap_trace */
+
+/*
+ * Locking in this file:
+ * - mmiotrace_mutex enforces enable/disable_mmiotrace() critical sections.
+ * - mmiotrace_enabled may be modified only when holding mmiotrace_mutex
+ *   and trace_lock.
+ * - Routines depending on is_enabled() must take trace_lock.
+ * - trace_list users must hold trace_lock.
+ * - is_enabled() guarantees that mmio_trace_record is allowed.
+ * - pre/post callbacks assume the effect of is_enabled() being true.
+ */
+
+/* module parameters */
+static unsigned long	filter_offset;
+static int		nommiotrace;
+static int		trace_pc;
+
+module_param(filter_offset, ulong, 0);
+module_param(nommiotrace, bool, 0);
+module_param(trace_pc, bool, 0);
+
+MODULE_PARM_DESC(filter_offset, "Start address of traced mappings.");
+MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing.");
+MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions.");
+
+static bool is_enabled(void)
+{
+	return atomic_read(&mmiotrace_enabled);
+}
+
+#if 0 /* XXX: needs rewrite */
+/*
+ * Write callback for the debugfs entry:
+ * Read a marker and write it to the mmio trace log
+ */
+static ssize_t write_marker(struct file *file, const char __user *buffer,
+						size_t count, loff_t *ppos)
+{
+	char *event = NULL;
+	struct mm_io_header *headp;
+	ssize_t len = (count > 65535) ? 65535 : count;
+
+	event = kzalloc(sizeof(*headp) + len, GFP_KERNEL);
+	if (!event)
+		return -ENOMEM;
+
+	headp = (struct mm_io_header *)event;
+	headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT);
+	headp->data_len = len;
+
+	if (copy_from_user(event + sizeof(*headp), buffer, len)) {
+		kfree(event);
+		return -EFAULT;
+	}
+
+	spin_lock_irq(&trace_lock);
+#if 0 /* XXX: convert this to use tracing */
+	if (is_enabled())
+		relay_write(chan, event, sizeof(*headp) + len);
+	else
+#endif
+		len = -EINVAL;
+	spin_unlock_irq(&trace_lock);
+	kfree(event);
+	return len;
+}
+#endif
+
+static void print_pte(unsigned long address)
+{
+	unsigned int level;
+	pte_t *pte = lookup_address(address, &level);
+
+	if (!pte) {
+		pr_err(NAME "Error in %s: no pte for page 0x%08lx\n",
+							__func__, address);
+		return;
+	}
+
+	if (level == PG_LEVEL_2M) {
+		pr_emerg(NAME "4MB pages are not currently supported: "
+							"0x%08lx\n", address);
+		BUG();
+	}
+	pr_info(NAME "pte for 0x%lx: 0x%llx 0x%llx\n", address,
+		(unsigned long long)pte_val(*pte),
+		(unsigned long long)pte_val(*pte) & _PAGE_PRESENT);
+}
+
+/*
+ * For some reason the pre/post pairs have been called in an
+ * unmatched order. Report and die.
+ */
+static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr)
+{
+	const struct trap_reason *my_reason = &get_cpu_var(pf_reason);
+	pr_emerg(NAME "unexpected fault for address: 0x%08lx, "
+					"last fault for address: 0x%08lx\n",
+					addr, my_reason->addr);
+	print_pte(addr);
+	print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip);
+	print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip);
+#ifdef __i386__
+	pr_emerg("eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx\n",
+			regs->ax, regs->bx, regs->cx, regs->dx);
+	pr_emerg("esi: %08lx   edi: %08lx   ebp: %08lx   esp: %08lx\n",
+			regs->si, regs->di, regs->bp, regs->sp);
+#else
+	pr_emerg("rax: %016lx   rcx: %016lx   rdx: %016lx\n",
+					regs->ax, regs->cx, regs->dx);
+	pr_emerg("rsi: %016lx   rdi: %016lx   rbp: %016lx   rsp: %016lx\n",
+				regs->si, regs->di, regs->bp, regs->sp);
+#endif
+	put_cpu_var(pf_reason);
+	BUG();
+}
+
+static void pre(struct kmmio_probe *p, struct pt_regs *regs,
+						unsigned long addr)
+{
+	struct trap_reason *my_reason = &get_cpu_var(pf_reason);
+	struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace);
+	const unsigned long instptr = instruction_pointer(regs);
+	const enum reason_type type = get_ins_type(instptr);
+	struct remap_trace *trace = p->private;
+
+	/* it doesn't make sense to have more than one active trace per cpu */
+	if (my_reason->active_traces)
+		die_kmmio_nesting_error(regs, addr);
+	else
+		my_reason->active_traces++;
+
+	my_reason->type = type;
+	my_reason->addr = addr;
+	my_reason->ip = instptr;
+
+	my_trace->phys = addr - trace->probe.addr + trace->phys;
+	my_trace->map_id = trace->id;
+
+	/*
+	 * Only record the program counter when requested.
+	 * It may taint clean-room reverse engineering.
+	 */
+	if (trace_pc)
+		my_trace->pc = instptr;
+	else
+		my_trace->pc = 0;
+
+	/*
+	 * XXX: the timestamp recorded will be *after* the tracing has been
+	 * done, not at the time we hit the instruction. SMP implications
+	 * on event ordering?
+	 */
+
+	switch (type) {
+	case REG_READ:
+		my_trace->opcode = MMIO_READ;
+		my_trace->width = get_ins_mem_width(instptr);
+		break;
+	case REG_WRITE:
+		my_trace->opcode = MMIO_WRITE;
+		my_trace->width = get_ins_mem_width(instptr);
+		my_trace->value = get_ins_reg_val(instptr, regs);
+		break;
+	case IMM_WRITE:
+		my_trace->opcode = MMIO_WRITE;
+		my_trace->width = get_ins_mem_width(instptr);
+		my_trace->value = get_ins_imm_val(instptr);
+		break;
+	default:
+		{
+			unsigned char *ip = (unsigned char *)instptr;
+			my_trace->opcode = MMIO_UNKNOWN_OP;
+			my_trace->width = 0;
+			my_trace->value = (*ip) << 16 | *(ip + 1) << 8 |
+								*(ip + 2);
+		}
+	}
+	put_cpu_var(cpu_trace);
+	put_cpu_var(pf_reason);
+}
+
+static void post(struct kmmio_probe *p, unsigned long condition,
+							struct pt_regs *regs)
+{
+	struct trap_reason *my_reason = &get_cpu_var(pf_reason);
+	struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace);
+
+	/* this should always return the active_trace count to 0 */
+	my_reason->active_traces--;
+	if (my_reason->active_traces) {
+		pr_emerg(NAME "unexpected post handler");
+		BUG();
+	}
+
+	switch (my_reason->type) {
+	case REG_READ:
+		my_trace->value = get_ins_reg_val(my_reason->ip, regs);
+		break;
+	default:
+		break;
+	}
+
+	mmio_trace_rw(my_trace);
+	put_cpu_var(cpu_trace);
+	put_cpu_var(pf_reason);
+}
+
+static void ioremap_trace_core(resource_size_t offset, unsigned long size,
+							void __iomem *addr)
+{
+	static atomic_t next_id;
+	struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL);
+	/* These are page-unaligned. */
+	struct mmiotrace_map map = {
+		.phys = offset,
+		.virt = (unsigned long)addr,
+		.len = size,
+		.opcode = MMIO_PROBE
+	};
+
+	if (!trace) {
+		pr_err(NAME "kmalloc failed in ioremap\n");
+		return;
+	}
+
+	*trace = (struct remap_trace) {
+		.probe = {
+			.addr = (unsigned long)addr,
+			.len = size,
+			.pre_handler = pre,
+			.post_handler = post,
+			.private = trace
+		},
+		.phys = offset,
+		.id = atomic_inc_return(&next_id)
+	};
+	map.map_id = trace->id;
+
+	spin_lock_irq(&trace_lock);
+	if (!is_enabled())
+		goto not_enabled;
+
+	mmio_trace_mapping(&map);
+	list_add_tail(&trace->list, &trace_list);
+	if (!nommiotrace)
+		register_kmmio_probe(&trace->probe);
+
+not_enabled:
+	spin_unlock_irq(&trace_lock);
+}
+
+void mmiotrace_ioremap(resource_size_t offset, unsigned long size,
+						void __iomem *addr)
+{
+	if (!is_enabled()) /* recheck and proper locking in *_core() */
+		return;
+
+	pr_debug(NAME "ioremap_*(0x%llx, 0x%lx) = %p\n",
+				(unsigned long long)offset, size, addr);
+	if ((filter_offset) && (offset != filter_offset))
+		return;
+	ioremap_trace_core(offset, size, addr);
+}
+
+static void iounmap_trace_core(volatile void __iomem *addr)
+{
+	struct mmiotrace_map map = {
+		.phys = 0,
+		.virt = (unsigned long)addr,
+		.len = 0,
+		.opcode = MMIO_UNPROBE
+	};
+	struct remap_trace *trace;
+	struct remap_trace *tmp;
+	struct remap_trace *found_trace = NULL;
+
+	pr_debug(NAME "Unmapping %p.\n", addr);
+
+	spin_lock_irq(&trace_lock);
+	if (!is_enabled())
+		goto not_enabled;
+
+	list_for_each_entry_safe(trace, tmp, &trace_list, list) {
+		if ((unsigned long)addr == trace->probe.addr) {
+			if (!nommiotrace)
+				unregister_kmmio_probe(&trace->probe);
+			list_del(&trace->list);
+			found_trace = trace;
+			break;
+		}
+	}
+	map.map_id = (found_trace) ? found_trace->id : -1;
+	mmio_trace_mapping(&map);
+
+not_enabled:
+	spin_unlock_irq(&trace_lock);
+	if (found_trace) {
+		synchronize_rcu(); /* unregister_kmmio_probe() requirement */
+		kfree(found_trace);
+	}
+}
+
+void mmiotrace_iounmap(volatile void __iomem *addr)
+{
+	might_sleep();
+	if (is_enabled()) /* recheck and proper locking in *_core() */
+		iounmap_trace_core(addr);
+}
+
+static void clear_trace_list(void)
+{
+	struct remap_trace *trace;
+	struct remap_trace *tmp;
+
+	/*
+	 * No locking required, because the caller ensures we are in a
+	 * critical section via mutex, and is_enabled() is false,
+	 * i.e. nothing can traverse or modify this list.
+	 * Caller also ensures is_enabled() cannot change.
+	 */
+	list_for_each_entry(trace, &trace_list, list) {
+		pr_notice(NAME "purging non-iounmapped "
+					"trace @0x%08lx, size 0x%lx.\n",
+					trace->probe.addr, trace->probe.len);
+		if (!nommiotrace)
+			unregister_kmmio_probe(&trace->probe);
+	}
+	synchronize_rcu(); /* unregister_kmmio_probe() requirement */
+
+	list_for_each_entry_safe(trace, tmp, &trace_list, list) {
+		list_del(&trace->list);
+		kfree(trace);
+	}
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static cpumask_t downed_cpus;
+
+static void enter_uniprocessor(void)
+{
+	int cpu;
+	int err;
+
+	get_online_cpus();
+	downed_cpus = cpu_online_map;
+	cpu_clear(first_cpu(cpu_online_map), downed_cpus);
+	if (num_online_cpus() > 1)
+		pr_notice(NAME "Disabling non-boot CPUs...\n");
+	put_online_cpus();
+
+	for_each_cpu_mask(cpu, downed_cpus) {
+		err = cpu_down(cpu);
+		if (!err)
+			pr_info(NAME "CPU%d is down.\n", cpu);
+		else
+			pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err);
+	}
+	if (num_online_cpus() > 1)
+		pr_warning(NAME "multiple CPUs still online, "
+						"may miss events.\n");
+}
+
+static void leave_uniprocessor(void)
+{
+	int cpu;
+	int err;
+
+	if (cpus_weight(downed_cpus) == 0)
+		return;
+	pr_notice(NAME "Re-enabling CPUs...\n");
+	for_each_cpu_mask(cpu, downed_cpus) {
+		err = cpu_up(cpu);
+		if (!err)
+			pr_info(NAME "enabled CPU%d.\n", cpu);
+		else
+			pr_err(NAME "cannot re-enable CPU%d: %d\n", cpu, err);
+	}
+}
+
+#else /* !CONFIG_HOTPLUG_CPU */
+static void enter_uniprocessor(void)
+{
+	if (num_online_cpus() > 1)
+		pr_warning(NAME "multiple CPUs are online, may miss events. "
+			"Suggest booting with maxcpus=1 kernel argument.\n");
+}
+
+static void leave_uniprocessor(void)
+{
+}
+#endif
+
+#if 0 /* XXX: out of order */
+static struct file_operations fops_marker = {
+	.owner =	THIS_MODULE,
+	.write =	write_marker
+};
+#endif
+
+void enable_mmiotrace(void)
+{
+	mutex_lock(&mmiotrace_mutex);
+	if (is_enabled())
+		goto out;
+
+#if 0 /* XXX: tracing does not support text entries */
+	marker_file = debugfs_create_file("marker", 0660, dir, NULL,
+								&fops_marker);
+	if (!marker_file)
+		pr_err(NAME "marker file creation failed.\n");
+#endif
+
+	if (nommiotrace)
+		pr_info(NAME "MMIO tracing disabled.\n");
+	enter_uniprocessor();
+	spin_lock_irq(&trace_lock);
+	atomic_inc(&mmiotrace_enabled);
+	spin_unlock_irq(&trace_lock);
+	pr_info(NAME "enabled.\n");
+out:
+	mutex_unlock(&mmiotrace_mutex);
+}
+
+void disable_mmiotrace(void)
+{
+	mutex_lock(&mmiotrace_mutex);
+	if (!is_enabled())
+		goto out;
+
+	spin_lock_irq(&trace_lock);
+	atomic_dec(&mmiotrace_enabled);
+	BUG_ON(is_enabled());
+	spin_unlock_irq(&trace_lock);
+
+	clear_trace_list(); /* guarantees: no more kmmio callbacks */
+	leave_uniprocessor();
+	if (marker_file) {
+		debugfs_remove(marker_file);
+		marker_file = NULL;
+	}
+
+	pr_info(NAME "disabled.\n");
+out:
+	mutex_unlock(&mmiotrace_mutex);
+}
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index c5066d519e5d..a4dd793d6003 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -20,37 +20,18 @@
 #include <asm/acpi.h>
 #include <asm/k8.h>
 
-#ifndef Dprintk
-#define Dprintk(x...)
-#endif
-
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 
-bootmem_data_t plat_node_bdata[MAX_NUMNODES];
-
 struct memnode memnode;
 
-#ifdef CONFIG_SMP
-int x86_cpu_to_node_map_init[NR_CPUS] = {
-	[0 ... NR_CPUS-1] = NUMA_NO_NODE
-};
-void *x86_cpu_to_node_map_early_ptr;
-EXPORT_SYMBOL(x86_cpu_to_node_map_early_ptr);
-#endif
-DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE;
-EXPORT_PER_CPU_SYMBOL(x86_cpu_to_node_map);
-
 s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
 	[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
 };
 
-cpumask_t node_to_cpumask_map[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_to_cpumask_map);
-
 int numa_off __initdata;
-unsigned long __initdata nodemap_addr;
-unsigned long __initdata nodemap_size;
+static unsigned long __initdata nodemap_addr;
+static unsigned long __initdata nodemap_size;
 
 /*
  * Given a shift value, try to populate memnodemap[]
@@ -99,7 +80,7 @@ static int __init allocate_cachealigned_memnodemap(void)
 
 	addr = 0x8000;
 	nodemap_size = round_up(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
-	nodemap_addr = find_e820_area(addr, end_pfn<<PAGE_SHIFT,
+	nodemap_addr = find_e820_area(addr, max_pfn<<PAGE_SHIFT,
 				      nodemap_size, L1_CACHE_BYTES);
 	if (nodemap_addr == -1UL) {
 		printk(KERN_ERR
@@ -192,7 +173,7 @@ static void * __init early_node_mem(int nodeid, unsigned long start,
 void __init setup_node_bootmem(int nodeid, unsigned long start,
 			       unsigned long end)
 {
-	unsigned long start_pfn, end_pfn, bootmap_pages, bootmap_size;
+	unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size;
 	unsigned long bootmap_start, nodedata_phys;
 	void *bootmap;
 	const int pgdat_size = round_up(sizeof(pg_data_t), PAGE_SIZE);
@@ -204,7 +185,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 	       start, end);
 
 	start_pfn = start >> PAGE_SHIFT;
-	end_pfn = end >> PAGE_SHIFT;
+	last_pfn = end >> PAGE_SHIFT;
 
 	node_data[nodeid] = early_node_mem(nodeid, start, end, pgdat_size,
 					   SMP_CACHE_BYTES);
@@ -215,9 +196,9 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 		nodedata_phys + pgdat_size - 1);
 
 	memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
-	NODE_DATA(nodeid)->bdata = &plat_node_bdata[nodeid];
+	NODE_DATA(nodeid)->bdata = &bootmem_node_data[nodeid];
 	NODE_DATA(nodeid)->node_start_pfn = start_pfn;
-	NODE_DATA(nodeid)->node_spanned_pages = end_pfn - start_pfn;
+	NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn;
 
 	/*
 	 * Find a place for the bootmem map
@@ -226,14 +207,14 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 	 * early_node_mem will get that with find_e820_area instead
 	 * of alloc_bootmem, that could clash with reserved range
 	 */
-	bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+	bootmap_pages = bootmem_bootmap_pages(last_pfn - start_pfn);
 	nid = phys_to_nid(nodedata_phys);
 	if (nid == nodeid)
 		bootmap_start = round_up(nodedata_phys + pgdat_size, PAGE_SIZE);
 	else
 		bootmap_start = round_up(start, PAGE_SIZE);
 	/*
-	 * SMP_CAHCE_BYTES could be enough, but init_bootmem_node like
+	 * SMP_CACHE_BYTES could be enough, but init_bootmem_node like
 	 * to use that to align to PAGE_SIZE
 	 */
 	bootmap = early_node_mem(nodeid, bootmap_start, end,
@@ -248,7 +229,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 
 	bootmap_size = init_bootmem_node(NODE_DATA(nodeid),
 					 bootmap_start >> PAGE_SHIFT,
-					 start_pfn, end_pfn);
+					 start_pfn, last_pfn);
 
 	printk(KERN_INFO "  bootmap [%016lx -  %016lx] pages %lx\n",
 		 bootmap_start, bootmap_start + bootmap_size - 1,
@@ -309,7 +290,7 @@ void __init numa_init_array(void)
 
 #ifdef CONFIG_NUMA_EMU
 /* Numa emulation */
-char *cmdline __initdata;
+static char *cmdline __initdata;
 
 /*
  * Setups up nid to range from addr to addr + size.  If the end
@@ -413,15 +394,15 @@ static int __init split_nodes_by_size(struct bootnode *nodes, u64 *addr,
 }
 
 /*
- * Sets up the system RAM area from start_pfn to end_pfn according to the
+ * Sets up the system RAM area from start_pfn to last_pfn according to the
  * numa=fake command-line option.
  */
 static struct bootnode nodes[MAX_NUMNODES] __initdata;
 
-static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn)
+static int __init numa_emulation(unsigned long start_pfn, unsigned long last_pfn)
 {
 	u64 size, addr = start_pfn << PAGE_SHIFT;
-	u64 max_addr = end_pfn << PAGE_SHIFT;
+	u64 max_addr = last_pfn << PAGE_SHIFT;
 	int num_nodes = 0, num = 0, coeff_flag, coeff = -1, i;
 
 	memset(&nodes, 0, sizeof(nodes));
@@ -527,7 +508,7 @@ out:
 }
 #endif /* CONFIG_NUMA_EMU */
 
-void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
+void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn)
 {
 	int i;
 
@@ -535,7 +516,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 	nodes_clear(node_online_map);
 
 #ifdef CONFIG_NUMA_EMU
-	if (cmdline && !numa_emulation(start_pfn, end_pfn))
+	if (cmdline && !numa_emulation(start_pfn, last_pfn))
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
@@ -543,7 +524,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 
 #ifdef CONFIG_ACPI_NUMA
 	if (!numa_off && !acpi_scan_nodes(start_pfn << PAGE_SHIFT,
-					  end_pfn << PAGE_SHIFT))
+					  last_pfn << PAGE_SHIFT))
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
@@ -551,7 +532,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 
 #ifdef CONFIG_K8_NUMA
 	if (!numa_off && !k8_scan_nodes(start_pfn<<PAGE_SHIFT,
-					end_pfn<<PAGE_SHIFT))
+					last_pfn<<PAGE_SHIFT))
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
@@ -561,7 +542,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 
 	printk(KERN_INFO "Faking a node at %016lx-%016lx\n",
 	       start_pfn << PAGE_SHIFT,
-	       end_pfn << PAGE_SHIFT);
+	       last_pfn << PAGE_SHIFT);
 	/* setup dummy node covering all memory */
 	memnode_shift = 63;
 	memnodemap = memnode.embedded_map;
@@ -570,29 +551,8 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 	node_set(0, node_possible_map);
 	for (i = 0; i < NR_CPUS; i++)
 		numa_set_node(i, 0);
-	/* cpumask_of_cpu() may not be available during early startup */
-	memset(&node_to_cpumask_map[0], 0, sizeof(node_to_cpumask_map[0]));
-	cpu_set(0, node_to_cpumask_map[0]);
-	e820_register_active_regions(0, start_pfn, end_pfn);
-	setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT);
-}
-
-__cpuinit void numa_add_cpu(int cpu)
-{
-	set_bit(cpu,
-		(unsigned long *)&node_to_cpumask_map[early_cpu_to_node(cpu)]);
-}
-
-void __cpuinit numa_set_node(int cpu, int node)
-{
-	int *cpu_to_node_map = x86_cpu_to_node_map_early_ptr;
-
-	if(cpu_to_node_map)
-		cpu_to_node_map[cpu] = node;
-	else if(per_cpu_offset(cpu))
-		per_cpu(x86_cpu_to_node_map, cpu) = node;
-	else
-		Dprintk(KERN_INFO "Setting node for non-present cpu %d\n", cpu);
+	e820_register_active_regions(0, start_pfn, last_pfn);
+	setup_node_bootmem(0, start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT);
 }
 
 unsigned long __init numa_free_all_bootmem(void)
@@ -613,7 +573,7 @@ void __init paging_init(void)
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 	max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
 	max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
-	max_zone_pfns[ZONE_NORMAL] = end_pfn;
+	max_zone_pfns[ZONE_NORMAL] = max_pfn;
 
 	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
@@ -641,6 +601,7 @@ static __init int numa_setup(char *opt)
 }
 early_param("numa", numa_setup);
 
+#ifdef CONFIG_NUMA
 /*
  * Setup early cpu_to_node.
  *
@@ -652,14 +613,19 @@ early_param("numa", numa_setup);
  * is already initialized in a round robin manner at numa_init_array,
  * prior to this call, and this initialization is good enough
  * for the fake NUMA cases.
+ *
+ * Called before the per_cpu areas are setup.
  */
 void __init init_cpu_to_node(void)
 {
-	int i;
+	int cpu;
+	u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
 
-	for (i = 0; i < NR_CPUS; i++) {
+	BUG_ON(cpu_to_apicid == NULL);
+
+	for_each_possible_cpu(cpu) {
 		int node;
-		u16 apicid = x86_cpu_to_apicid_init[i];
+		u16 apicid = cpu_to_apicid[cpu];
 
 		if (apicid == BAD_APICID)
 			continue;
@@ -668,8 +634,9 @@ void __init init_cpu_to_node(void)
 			continue;
 		if (!node_online(node))
 			continue;
-		numa_set_node(i, node);
+		numa_set_node(cpu, node);
 	}
 }
+#endif
 
 
diff --git a/arch/x86/mm/pageattr-test.c b/arch/x86/mm/pageattr-test.c
index 75f1b109aae8..0dcd42eb94e6 100644
--- a/arch/x86/mm/pageattr-test.c
+++ b/arch/x86/mm/pageattr-test.c
@@ -1,8 +1,8 @@
 /*
  * self test for change_page_attr.
  *
- * Clears the global bit on random pages in the direct mapping, then reverts
- * and compares page tables forwards and afterwards.
+ * Clears the a test pte bit on random pages in the direct mapping,
+ * then reverts and compares page tables forwards and afterwards.
  */
 #include <linux/bootmem.h>
 #include <linux/kthread.h>
@@ -32,6 +32,13 @@ enum {
 	GPS			= (1<<30)
 };
 
+#define PAGE_TESTBIT	__pgprot(_PAGE_UNUSED1)
+
+static int pte_testbit(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_UNUSED1;
+}
+
 struct split_state {
 	long lpg, gpg, spg, exec;
 	long min_exec, max_exec;
@@ -165,15 +172,14 @@ static int pageattr_test(void)
 			continue;
 		}
 
-		err = change_page_attr_clear(addr[i], len[i],
-					       __pgprot(_PAGE_GLOBAL));
+		err = change_page_attr_set(addr[i], len[i], PAGE_TESTBIT);
 		if (err < 0) {
 			printk(KERN_ERR "CPA %d failed %d\n", i, err);
 			failed++;
 		}
 
 		pte = lookup_address(addr[i], &level);
-		if (!pte || pte_global(*pte) || pte_huge(*pte)) {
+		if (!pte || !pte_testbit(*pte) || pte_huge(*pte)) {
 			printk(KERN_ERR "CPA %lx: bad pte %Lx\n", addr[i],
 				pte ? (u64)pte_val(*pte) : 0ULL);
 			failed++;
@@ -198,14 +204,13 @@ static int pageattr_test(void)
 			failed++;
 			continue;
 		}
-		err = change_page_attr_set(addr[i], len[i],
-					     __pgprot(_PAGE_GLOBAL));
+		err = change_page_attr_clear(addr[i], len[i], PAGE_TESTBIT);
 		if (err < 0) {
 			printk(KERN_ERR "CPA reverting failed: %d\n", err);
 			failed++;
 		}
 		pte = lookup_address(addr[i], &level);
-		if (!pte || !pte_global(*pte)) {
+		if (!pte || pte_testbit(*pte)) {
 			printk(KERN_ERR "CPA %lx: bad pte after revert %Lx\n",
 				addr[i], pte ? (u64)pte_val(*pte) : 0ULL);
 			failed++;
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 60bcb5b6a37e..65c6e46bf059 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -34,6 +34,41 @@ struct cpa_data {
 	unsigned	force_split : 1;
 };
 
+#ifdef CONFIG_PROC_FS
+static unsigned long direct_pages_count[PG_LEVEL_NUM];
+
+void update_page_count(int level, unsigned long pages)
+{
+	unsigned long flags;
+
+	/* Protect against CPA */
+	spin_lock_irqsave(&pgd_lock, flags);
+	direct_pages_count[level] += pages;
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+static void split_page_count(int level)
+{
+	direct_pages_count[level]--;
+	direct_pages_count[level - 1] += PTRS_PER_PTE;
+}
+
+int arch_report_meminfo(char *page)
+{
+	int n = sprintf(page, "DirectMap4k:  %8lu\n"
+			"DirectMap2M:  %8lu\n",
+			direct_pages_count[PG_LEVEL_4K],
+			direct_pages_count[PG_LEVEL_2M]);
+#ifdef CONFIG_X86_64
+	n += sprintf(page + n, "DirectMap1G:  %8lu\n",
+		     direct_pages_count[PG_LEVEL_1G]);
+#endif
+	return n;
+}
+#else
+static inline void split_page_count(int level) { }
+#endif
+
 #ifdef CONFIG_X86_64
 
 static inline unsigned long highmap_start_pfn(void)
@@ -106,7 +141,7 @@ static void cpa_flush_all(unsigned long cache)
 {
 	BUG_ON(irqs_disabled());
 
-	on_each_cpu(__cpa_flush_all, (void *) cache, 1, 1);
+	on_each_cpu(__cpa_flush_all, (void *) cache, 1);
 }
 
 static void __cpa_flush_range(void *arg)
@@ -127,7 +162,7 @@ static void cpa_flush_range(unsigned long start, int numpages, int cache)
 	BUG_ON(irqs_disabled());
 	WARN_ON(PAGE_ALIGN(start) != start);
 
-	on_each_cpu(__cpa_flush_range, NULL, 1, 1);
+	on_each_cpu(__cpa_flush_range, NULL, 1);
 
 	if (!cache)
 		return;
@@ -227,6 +262,7 @@ pte_t *lookup_address(unsigned long address, unsigned int *level)
 
 	return pte_offset_kernel(pmd, address);
 }
+EXPORT_SYMBOL_GPL(lookup_address);
 
 /*
  * Set the new pmd in all the pgds we know about:
@@ -500,6 +536,16 @@ static int split_large_page(pte_t *kpte, unsigned long address)
 	for (i = 0; i < PTRS_PER_PTE; i++, pfn += pfninc)
 		set_pte(&pbase[i], pfn_pte(pfn, ref_prot));
 
+	if (address >= (unsigned long)__va(0) &&
+		address < (unsigned long)__va(max_low_pfn_mapped << PAGE_SHIFT))
+		split_page_count(level);
+
+#ifdef CONFIG_X86_64
+	if (address >= (unsigned long)__va(1UL<<32) &&
+		address < (unsigned long)__va(max_pfn_mapped << PAGE_SHIFT))
+		split_page_count(level);
+#endif
+
 	/*
 	 * Install the new, split up pagetable. Important details here:
 	 *
@@ -613,15 +659,24 @@ static int cpa_process_alias(struct cpa_data *cpa)
 	struct cpa_data alias_cpa;
 	int ret = 0;
 
-	if (cpa->pfn > max_pfn_mapped)
+	if (cpa->pfn >= max_pfn_mapped)
 		return 0;
 
+#ifdef CONFIG_X86_64
+	if (cpa->pfn >= max_low_pfn_mapped && cpa->pfn < (1UL<<(32-PAGE_SHIFT)))
+		return 0;
+#endif
 	/*
 	 * No need to redo, when the primary call touched the direct
 	 * mapping already:
 	 */
-	if (!within(cpa->vaddr, PAGE_OFFSET,
-		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))) {
+	if (!(within(cpa->vaddr, PAGE_OFFSET,
+		    PAGE_OFFSET + (max_low_pfn_mapped << PAGE_SHIFT))
+#ifdef CONFIG_X86_64
+		|| within(cpa->vaddr, PAGE_OFFSET + (1UL<<32),
+		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))
+#endif
+	)) {
 
 		alias_cpa = *cpa;
 		alias_cpa.vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
@@ -805,7 +860,7 @@ int _set_memory_wc(unsigned long addr, int numpages)
 
 int set_memory_wc(unsigned long addr, int numpages)
 {
-	if (!pat_wc_enabled)
+	if (!pat_enabled)
 		return set_memory_uc(addr, numpages);
 
 	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 06b7a1c90fb8..2fe30916d4b6 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -12,6 +12,8 @@
 #include <linux/gfp.h>
 #include <linux/fs.h>
 #include <linux/bootmem.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 
 #include <asm/msr.h>
 #include <asm/tlbflush.h>
@@ -26,11 +28,11 @@
 #include <asm/io.h>
 
 #ifdef CONFIG_X86_PAT
-int __read_mostly pat_wc_enabled = 1;
+int __read_mostly pat_enabled = 1;
 
 void __cpuinit pat_disable(char *reason)
 {
-	pat_wc_enabled = 0;
+	pat_enabled = 0;
 	printk(KERN_INFO "%s\n", reason);
 }
 
@@ -42,6 +44,19 @@ static int __init nopat(char *str)
 early_param("nopat", nopat);
 #endif
 
+
+static int debug_enable;
+static int __init pat_debug_setup(char *str)
+{
+	debug_enable = 1;
+	return 0;
+}
+__setup("debugpat", pat_debug_setup);
+
+#define dprintk(fmt, arg...) \
+	do { if (debug_enable) printk(KERN_INFO fmt, ##arg); } while (0)
+
+
 static u64 __read_mostly boot_pat_state;
 
 enum {
@@ -53,24 +68,25 @@ enum {
 	PAT_UC_MINUS = 7,	/* UC, but can be overriden by MTRR */
 };
 
-#define PAT(x,y)	((u64)PAT_ ## y << ((x)*8))
+#define PAT(x, y)	((u64)PAT_ ## y << ((x)*8))
 
 void pat_init(void)
 {
 	u64 pat;
 
-	if (!pat_wc_enabled)
+	if (!pat_enabled)
 		return;
 
 	/* Paranoia check. */
-	if (!cpu_has_pat) {
-		printk(KERN_ERR "PAT enabled, but CPU feature cleared\n");
+	if (!cpu_has_pat && boot_pat_state) {
 		/*
-		 * Panic if this happens on the secondary CPU, and we
+		 * If this happens we are on a secondary CPU, but
 		 * switched to PAT on the boot CPU. We have no way to
 		 * undo PAT.
-		*/
-		BUG_ON(boot_pat_state);
+		 */
+		printk(KERN_ERR "PAT enabled, "
+		       "but not supported by secondary CPU\n");
+		BUG();
 	}
 
 	/* Set PWT to Write-Combining. All other bits stay the same */
@@ -86,8 +102,8 @@ void pat_init(void)
 	 *      011 UC		_PAGE_CACHE_UC
 	 * PAT bit unused
 	 */
-	pat = PAT(0,WB) | PAT(1,WC) | PAT(2,UC_MINUS) | PAT(3,UC) |
-	      PAT(4,WB) | PAT(5,WC) | PAT(6,UC_MINUS) | PAT(7,UC);
+	pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
+	      PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
 
 	/* Boot CPU check */
 	if (!boot_pat_state)
@@ -103,11 +119,11 @@ void pat_init(void)
 static char *cattr_name(unsigned long flags)
 {
 	switch (flags & _PAGE_CACHE_MASK) {
-		case _PAGE_CACHE_UC:		return "uncached";
-		case _PAGE_CACHE_UC_MINUS:	return "uncached-minus";
-		case _PAGE_CACHE_WB:		return "write-back";
-		case _PAGE_CACHE_WC:		return "write-combining";
-		default:			return "broken";
+	case _PAGE_CACHE_UC:		return "uncached";
+	case _PAGE_CACHE_UC_MINUS:	return "uncached-minus";
+	case _PAGE_CACHE_WB:		return "write-back";
+	case _PAGE_CACHE_WC:		return "write-combining";
+	default:			return "broken";
 	}
 }
 
@@ -145,47 +161,50 @@ static DEFINE_SPINLOCK(memtype_lock); 	/* protects memtype list */
  * The intersection is based on "Effective Memory Type" tables in IA-32
  * SDM vol 3a
  */
-static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot,
-				unsigned long *ret_prot)
+static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type)
 {
-	unsigned long pat_type;
-	u8 mtrr_type;
-
-	pat_type = prot & _PAGE_CACHE_MASK;
-	prot &= (~_PAGE_CACHE_MASK);
-
-	/*
-	 * We return the PAT request directly for types where PAT takes
-	 * precedence with respect to MTRR and for UC_MINUS.
-	 * Consistency checks with other PAT requests is done later
-	 * while going through memtype list.
-	 */
-	if (pat_type == _PAGE_CACHE_WC) {
-		*ret_prot = prot | _PAGE_CACHE_WC;
-		return 0;
-	} else if (pat_type == _PAGE_CACHE_UC_MINUS) {
-		*ret_prot = prot | _PAGE_CACHE_UC_MINUS;
-		return 0;
-	} else if (pat_type == _PAGE_CACHE_UC) {
-		*ret_prot = prot | _PAGE_CACHE_UC;
-		return 0;
-	}
-
 	/*
 	 * Look for MTRR hint to get the effective type in case where PAT
 	 * request is for WB.
 	 */
-	mtrr_type = mtrr_type_lookup(start, end);
+	if (req_type == _PAGE_CACHE_WB) {
+		u8 mtrr_type;
+
+		mtrr_type = mtrr_type_lookup(start, end);
+		if (mtrr_type == MTRR_TYPE_UNCACHABLE)
+			return _PAGE_CACHE_UC;
+		if (mtrr_type == MTRR_TYPE_WRCOMB)
+			return _PAGE_CACHE_WC;
+	}
 
-	if (mtrr_type == MTRR_TYPE_UNCACHABLE) {
-		*ret_prot = prot | _PAGE_CACHE_UC;
-	} else if (mtrr_type == MTRR_TYPE_WRCOMB) {
-		*ret_prot = prot | _PAGE_CACHE_WC;
-	} else {
-		*ret_prot = prot | _PAGE_CACHE_WB;
+	return req_type;
+}
+
+static int chk_conflict(struct memtype *new, struct memtype *entry,
+			unsigned long *type)
+{
+	if (new->type != entry->type) {
+		if (type) {
+			new->type = entry->type;
+			*type = entry->type;
+		} else
+			goto conflict;
 	}
 
+	 /* check overlaps with more than one entry in the list */
+	list_for_each_entry_continue(entry, &memtype_list, nd) {
+		if (new->end <= entry->start)
+			break;
+		else if (new->type != entry->type)
+			goto conflict;
+	}
 	return 0;
+
+ conflict:
+	printk(KERN_INFO "%s:%d conflicting memory types "
+	       "%Lx-%Lx %s<->%s\n", current->comm, current->pid, new->start,
+	       new->end, cattr_name(new->type), cattr_name(entry->type));
+	return -EBUSY;
 }
 
 /*
@@ -198,37 +217,36 @@ static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot,
  * req_type will have a special case value '-1', when requester want to inherit
  * the memory type from mtrr (if WB), existing PAT, defaulting to UC_MINUS.
  *
- * If ret_type is NULL, function will return an error if it cannot reserve the
- * region with req_type. If ret_type is non-null, function will return
- * available type in ret_type in case of no error. In case of any error
+ * If new_type is NULL, function will return an error if it cannot reserve the
+ * region with req_type. If new_type is non-NULL, function will return
+ * available type in new_type in case of no error. In case of any error
  * it will return a negative return value.
  */
 int reserve_memtype(u64 start, u64 end, unsigned long req_type,
-			unsigned long *ret_type)
+			unsigned long *new_type)
 {
-	struct memtype *new_entry = NULL;
-	struct memtype *parse;
+	struct memtype *new, *entry;
 	unsigned long actual_type;
+	struct list_head *where;
 	int err = 0;
 
-	/* Only track when pat_wc_enabled */
-	if (!pat_wc_enabled) {
+ 	BUG_ON(start >= end); /* end is exclusive */
+
+	if (!pat_enabled) {
 		/* This is identical to page table setting without PAT */
-		if (ret_type) {
-			if (req_type == -1) {
-				*ret_type = _PAGE_CACHE_WB;
-			} else {
-				*ret_type = req_type;
-			}
+		if (new_type) {
+			if (req_type == -1)
+				*new_type = _PAGE_CACHE_WB;
+			else
+				*new_type = req_type & _PAGE_CACHE_MASK;
 		}
 		return 0;
 	}
 
 	/* Low ISA region is always mapped WB in page table. No need to track */
-	if (start >= ISA_START_ADDRESS && (end - 1) <= ISA_END_ADDRESS) {
-		if (ret_type)
-			*ret_type = _PAGE_CACHE_WB;
-
+	if (is_ISA_range(start, end - 1)) {
+		if (new_type)
+			*new_type = _PAGE_CACHE_WB;
 		return 0;
 	}
 
@@ -241,206 +259,92 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		 */
 		u8 mtrr_type = mtrr_type_lookup(start, end);
 
-		if (mtrr_type == MTRR_TYPE_WRBACK) {
-			req_type = _PAGE_CACHE_WB;
+		if (mtrr_type == MTRR_TYPE_WRBACK)
 			actual_type = _PAGE_CACHE_WB;
-		} else {
-			req_type = _PAGE_CACHE_UC_MINUS;
+		else
 			actual_type = _PAGE_CACHE_UC_MINUS;
-		}
-	} else {
-		req_type &= _PAGE_CACHE_MASK;
-		err = pat_x_mtrr_type(start, end, req_type, &actual_type);
-	}
-
-	if (err) {
-		if (ret_type)
-			*ret_type = actual_type;
+	} else
+		actual_type = pat_x_mtrr_type(start, end,
+					      req_type & _PAGE_CACHE_MASK);
 
-		return -EINVAL;
-	}
-
-	new_entry  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
-	if (!new_entry)
+	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	if (!new)
 		return -ENOMEM;
 
-	new_entry->start = start;
-	new_entry->end = end;
-	new_entry->type = actual_type;
+	new->start = start;
+	new->end = end;
+	new->type = actual_type;
 
-	if (ret_type)
-		*ret_type = actual_type;
+	if (new_type)
+		*new_type = actual_type;
 
 	spin_lock(&memtype_lock);
 
 	/* Search for existing mapping that overlaps the current range */
-	list_for_each_entry(parse, &memtype_list, nd) {
-		struct memtype *saved_ptr;
-
-		if (parse->start >= end) {
-			pr_debug("New Entry\n");
-			list_add(&new_entry->nd, parse->nd.prev);
-			new_entry = NULL;
+	where = NULL;
+	list_for_each_entry(entry, &memtype_list, nd) {
+		if (end <= entry->start) {
+			where = entry->nd.prev;
 			break;
-		}
-
-		if (start <= parse->start && end >= parse->start) {
-			if (actual_type != parse->type && ret_type) {
-				actual_type = parse->type;
-				*ret_type = actual_type;
-				new_entry->type = actual_type;
+		} else if (start <= entry->start) { /* end > entry->start */
+			err = chk_conflict(new, entry, new_type);
+			if (!err) {
+				dprintk("Overlap at 0x%Lx-0x%Lx\n",
+					entry->start, entry->end);
+				where = entry->nd.prev;
 			}
-
-			if (actual_type != parse->type) {
-				printk(
-		KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
-					current->comm, current->pid,
-					start, end,
-					cattr_name(actual_type),
-					cattr_name(parse->type));
-				err = -EBUSY;
-				break;
-			}
-
-			saved_ptr = parse;
-			/*
-			 * Check to see whether the request overlaps more
-			 * than one entry in the list
-			 */
-			list_for_each_entry_continue(parse, &memtype_list, nd) {
-				if (end <= parse->start) {
-					break;
-				}
-
-				if (actual_type != parse->type) {
-					printk(
-		KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
-						current->comm, current->pid,
-						start, end,
-						cattr_name(actual_type),
-						cattr_name(parse->type));
-					err = -EBUSY;
-					break;
-				}
-			}
-
-			if (err) {
-				break;
-			}
-
-			pr_debug("Overlap at 0x%Lx-0x%Lx\n",
-			       saved_ptr->start, saved_ptr->end);
-			/* No conflict. Go ahead and add this new entry */
-			list_add(&new_entry->nd, saved_ptr->nd.prev);
-			new_entry = NULL;
 			break;
-		}
-
-		if (start < parse->end) {
-			if (actual_type != parse->type && ret_type) {
-				actual_type = parse->type;
-				*ret_type = actual_type;
-				new_entry->type = actual_type;
-			}
-
-			if (actual_type != parse->type) {
-				printk(
-		KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
-					current->comm, current->pid,
-					start, end,
-					cattr_name(actual_type),
-					cattr_name(parse->type));
-				err = -EBUSY;
-				break;
-			}
-
-			saved_ptr = parse;
-			/*
-			 * Check to see whether the request overlaps more
-			 * than one entry in the list
-			 */
-			list_for_each_entry_continue(parse, &memtype_list, nd) {
-				if (end <= parse->start) {
-					break;
-				}
-
-				if (actual_type != parse->type) {
-					printk(
-		KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
-						current->comm, current->pid,
-						start, end,
-						cattr_name(actual_type),
-						cattr_name(parse->type));
-					err = -EBUSY;
-					break;
-				}
+		} else if (start < entry->end) { /* start > entry->start */
+			err = chk_conflict(new, entry, new_type);
+			if (!err) {
+				dprintk("Overlap at 0x%Lx-0x%Lx\n",
+					entry->start, entry->end);
+				where = &entry->nd;
 			}
-
-			if (err) {
-				break;
-			}
-
-			pr_debug(KERN_INFO "Overlap at 0x%Lx-0x%Lx\n",
-				 saved_ptr->start, saved_ptr->end);
-			/* No conflict. Go ahead and add this new entry */
-			list_add(&new_entry->nd, &saved_ptr->nd);
-			new_entry = NULL;
 			break;
 		}
 	}
 
 	if (err) {
-		printk(KERN_INFO
-	"reserve_memtype failed 0x%Lx-0x%Lx, track %s, req %s\n",
-			start, end, cattr_name(new_entry->type),
-			cattr_name(req_type));
-		kfree(new_entry);
+		printk(KERN_INFO "reserve_memtype failed 0x%Lx-0x%Lx, "
+		       "track %s, req %s\n",
+		       start, end, cattr_name(new->type), cattr_name(req_type));
+		kfree(new);
 		spin_unlock(&memtype_lock);
 		return err;
 	}
 
-	if (new_entry) {
-		/* No conflict. Not yet added to the list. Add to the tail */
-		list_add_tail(&new_entry->nd, &memtype_list);
-		pr_debug("New Entry\n");
-	}
-
-	if (ret_type) {
-		pr_debug(
-	"reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n",
-			start, end, cattr_name(actual_type),
-			cattr_name(req_type), cattr_name(*ret_type));
-	} else {
-		pr_debug(
-	"reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s\n",
-			start, end, cattr_name(actual_type),
-			cattr_name(req_type));
-	}
+	if (where)
+		list_add(&new->nd, where);
+	else
+		list_add_tail(&new->nd, &memtype_list);
 
 	spin_unlock(&memtype_lock);
+
+	dprintk("reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n",
+		start, end, cattr_name(new->type), cattr_name(req_type),
+		new_type ? cattr_name(*new_type) : "-");
+
 	return err;
 }
 
 int free_memtype(u64 start, u64 end)
 {
-	struct memtype *ml;
+	struct memtype *entry;
 	int err = -EINVAL;
 
-	/* Only track when pat_wc_enabled */
-	if (!pat_wc_enabled) {
+	if (!pat_enabled)
 		return 0;
-	}
 
 	/* Low ISA region is always mapped WB. No need to track */
-	if (start >= ISA_START_ADDRESS && end <= ISA_END_ADDRESS) {
+	if (is_ISA_range(start, end - 1))
 		return 0;
-	}
 
 	spin_lock(&memtype_lock);
-	list_for_each_entry(ml, &memtype_list, nd) {
-		if (ml->start == start && ml->end == end) {
-			list_del(&ml->nd);
-			kfree(ml);
+	list_for_each_entry(entry, &memtype_list, nd) {
+		if (entry->start == start && entry->end == end) {
+			list_del(&entry->nd);
+			kfree(entry);
 			err = 0;
 			break;
 		}
@@ -452,7 +356,7 @@ int free_memtype(u64 start, u64 end)
 			current->comm, current->pid, start, end);
 	}
 
-	pr_debug("free_memtype request 0x%Lx-0x%Lx\n", start, end);
+	dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end);
 	return err;
 }
 
@@ -471,8 +375,8 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 	return vma_prot;
 }
 
-#ifdef CONFIG_NONPROMISC_DEVMEM
-/* This check is done in drivers/char/mem.c in case of NONPROMISC_DEVMEM*/
+#ifdef CONFIG_STRICT_DEVMEM
+/* This check is done in drivers/char/mem.c in case of STRICT_DEVMEM*/
 static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 {
 	return 1;
@@ -496,7 +400,7 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 	}
 	return 1;
 }
-#endif /* CONFIG_NONPROMISC_DEVMEM */
+#endif /* CONFIG_STRICT_DEVMEM */
 
 int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
@@ -521,12 +425,12 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 	 * caching for the high addresses through the KEN pin, but
 	 * we maintain the tradition of paranoia in this code.
 	 */
-	if (!pat_wc_enabled &&
-	    ! ( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) ||
-		test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) ||
-		test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) ||
-		test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability)) &&
-	   (pfn << PAGE_SHIFT) >= __pa(high_memory)) {
+	if (!pat_enabled &&
+	    !(boot_cpu_has(X86_FEATURE_MTRR) ||
+	      boot_cpu_has(X86_FEATURE_K6_MTRR) ||
+	      boot_cpu_has(X86_FEATURE_CYRIX_ARR) ||
+	      boot_cpu_has(X86_FEATURE_CENTAUR_MCR)) &&
+	    (pfn << PAGE_SHIFT) >= __pa(high_memory)) {
 		flags = _PAGE_CACHE_UC;
 	}
 #endif
@@ -547,8 +451,9 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 	if (retval < 0)
 		return 0;
 
-	if (pfn <= max_pfn_mapped &&
-            ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
+	if (((pfn < max_low_pfn_mapped) ||
+	     (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) &&
+	    ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
 		free_memtype(offset, offset + size);
 		printk(KERN_INFO
 		"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
@@ -587,3 +492,88 @@ void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
 	free_memtype(addr, addr + size);
 }
 
+#if defined(CONFIG_DEBUG_FS)
+
+/* get Nth element of the linked list */
+static struct memtype *memtype_get_idx(loff_t pos)
+{
+	struct memtype *list_node, *print_entry;
+	int i = 1;
+
+	print_entry  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	if (!print_entry)
+		return NULL;
+
+	spin_lock(&memtype_lock);
+	list_for_each_entry(list_node, &memtype_list, nd) {
+		if (pos == i) {
+			*print_entry = *list_node;
+			spin_unlock(&memtype_lock);
+			return print_entry;
+		}
+		++i;
+	}
+	spin_unlock(&memtype_lock);
+	kfree(print_entry);
+	return NULL;
+}
+
+static void *memtype_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	if (*pos == 0) {
+		++*pos;
+		seq_printf(seq, "PAT memtype list:\n");
+	}
+
+	return memtype_get_idx(*pos);
+}
+
+static void *memtype_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	++*pos;
+	return memtype_get_idx(*pos);
+}
+
+static void memtype_seq_stop(struct seq_file *seq, void *v)
+{
+}
+
+static int memtype_seq_show(struct seq_file *seq, void *v)
+{
+	struct memtype *print_entry = (struct memtype *)v;
+
+	seq_printf(seq, "%s @ 0x%Lx-0x%Lx\n", cattr_name(print_entry->type),
+			print_entry->start, print_entry->end);
+	kfree(print_entry);
+	return 0;
+}
+
+static struct seq_operations memtype_seq_ops = {
+	.start = memtype_seq_start,
+	.next  = memtype_seq_next,
+	.stop  = memtype_seq_stop,
+	.show  = memtype_seq_show,
+};
+
+static int memtype_seq_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &memtype_seq_ops);
+}
+
+static const struct file_operations memtype_fops = {
+	.open    = memtype_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release,
+};
+
+static int __init pat_memtype_list_init(void)
+{
+	debugfs_create_file("pat_memtype_list", S_IRUSR, arch_debugfs_dir,
+				NULL, &memtype_fops);
+	return 0;
+}
+
+late_initcall(pat_memtype_list_init);
+
+#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c
new file mode 100644
index 000000000000..efa1911e20ca
--- /dev/null
+++ b/arch/x86/mm/pf_in.c
@@ -0,0 +1,489 @@
+/*
+ *  Fault Injection Test harness (FI)
+ *  Copyright (C) Intel Crop.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307,
+ *  USA.
+ *
+ */
+
+/*  Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp
+ *  Copyright by Intel Crop., 2002
+ *  Louis Zhuang (louis.zhuang@intel.com)
+ *
+ *  Bjorn Steinbrink (B.Steinbrink@gmx.de), 2007
+ */
+
+#include <linux/module.h>
+#include <linux/ptrace.h> /* struct pt_regs */
+#include "pf_in.h"
+
+#ifdef __i386__
+/* IA32 Manual 3, 2-1 */
+static unsigned char prefix_codes[] = {
+	0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64,
+	0x65, 0x2E, 0x3E, 0x66, 0x67
+};
+/* IA32 Manual 3, 3-432*/
+static unsigned int reg_rop[] = {
+	0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
+};
+static unsigned int reg_wop[] = { 0x88, 0x89 };
+static unsigned int imm_wop[] = { 0xC6, 0xC7 };
+/* IA32 Manual 3, 3-432*/
+static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 };
+static unsigned int rw32[] = {
+	0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
+};
+static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F };
+static unsigned int mw16[] = { 0xB70F, 0xBF0F };
+static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 };
+static unsigned int mw64[] = {};
+#else /* not __i386__ */
+static unsigned char prefix_codes[] = {
+	0x66, 0x67, 0x2E, 0x3E, 0x26, 0x64, 0x65, 0x36,
+	0xF0, 0xF3, 0xF2,
+	/* REX Prefixes */
+	0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+	0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f
+};
+/* AMD64 Manual 3, Appendix A*/
+static unsigned int reg_rop[] = {
+	0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
+};
+static unsigned int reg_wop[] = { 0x88, 0x89 };
+static unsigned int imm_wop[] = { 0xC6, 0xC7 };
+static unsigned int rw8[] = { 0xC6, 0x88, 0x8A };
+static unsigned int rw32[] = {
+	0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
+};
+/* 8 bit only */
+static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F };
+/* 16 bit only */
+static unsigned int mw16[] = { 0xB70F, 0xBF0F };
+/* 16 or 32 bit */
+static unsigned int mw32[] = { 0xC7 };
+/* 16, 32 or 64 bit */
+static unsigned int mw64[] = { 0x89, 0x8B };
+#endif /* not __i386__ */
+
+static int skip_prefix(unsigned char *addr, int *shorted, int *enlarged,
+								int *rexr)
+{
+	int i;
+	unsigned char *p = addr;
+	*shorted = 0;
+	*enlarged = 0;
+	*rexr = 0;
+
+restart:
+	for (i = 0; i < ARRAY_SIZE(prefix_codes); i++) {
+		if (*p == prefix_codes[i]) {
+			if (*p == 0x66)
+				*shorted = 1;
+#ifdef __amd64__
+			if ((*p & 0xf8) == 0x48)
+				*enlarged = 1;
+			if ((*p & 0xf4) == 0x44)
+				*rexr = 1;
+#endif
+			p++;
+			goto restart;
+		}
+	}
+
+	return (p - addr);
+}
+
+static int get_opcode(unsigned char *addr, unsigned int *opcode)
+{
+	int len;
+
+	if (*addr == 0x0F) {
+		/* 0x0F is extension instruction */
+		*opcode = *(unsigned short *)addr;
+		len = 2;
+	} else {
+		*opcode = *addr;
+		len = 1;
+	}
+
+	return len;
+}
+
+#define CHECK_OP_TYPE(opcode, array, type) \
+	for (i = 0; i < ARRAY_SIZE(array); i++) { \
+		if (array[i] == opcode) { \
+			rv = type; \
+			goto exit; \
+		} \
+	}
+
+enum reason_type get_ins_type(unsigned long ins_addr)
+{
+	unsigned int opcode;
+	unsigned char *p;
+	int shorted, enlarged, rexr;
+	int i;
+	enum reason_type rv = OTHERS;
+
+	p = (unsigned char *)ins_addr;
+	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += get_opcode(p, &opcode);
+
+	CHECK_OP_TYPE(opcode, reg_rop, REG_READ);
+	CHECK_OP_TYPE(opcode, reg_wop, REG_WRITE);
+	CHECK_OP_TYPE(opcode, imm_wop, IMM_WRITE);
+
+exit:
+	return rv;
+}
+#undef CHECK_OP_TYPE
+
+static unsigned int get_ins_reg_width(unsigned long ins_addr)
+{
+	unsigned int opcode;
+	unsigned char *p;
+	int i, shorted, enlarged, rexr;
+
+	p = (unsigned char *)ins_addr;
+	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += get_opcode(p, &opcode);
+
+	for (i = 0; i < ARRAY_SIZE(rw8); i++)
+		if (rw8[i] == opcode)
+			return 1;
+
+	for (i = 0; i < ARRAY_SIZE(rw32); i++)
+		if (rw32[i] == opcode)
+			return (shorted ? 2 : (enlarged ? 8 : 4));
+
+	printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode);
+	return 0;
+}
+
+unsigned int get_ins_mem_width(unsigned long ins_addr)
+{
+	unsigned int opcode;
+	unsigned char *p;
+	int i, shorted, enlarged, rexr;
+
+	p = (unsigned char *)ins_addr;
+	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += get_opcode(p, &opcode);
+
+	for (i = 0; i < ARRAY_SIZE(mw8); i++)
+		if (mw8[i] == opcode)
+			return 1;
+
+	for (i = 0; i < ARRAY_SIZE(mw16); i++)
+		if (mw16[i] == opcode)
+			return 2;
+
+	for (i = 0; i < ARRAY_SIZE(mw32); i++)
+		if (mw32[i] == opcode)
+			return shorted ? 2 : 4;
+
+	for (i = 0; i < ARRAY_SIZE(mw64); i++)
+		if (mw64[i] == opcode)
+			return shorted ? 2 : (enlarged ? 8 : 4);
+
+	printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode);
+	return 0;
+}
+
+/*
+ * Define register ident in mod/rm byte.
+ * Note: these are NOT the same as in ptrace-abi.h.
+ */
+enum {
+	arg_AL = 0,
+	arg_CL = 1,
+	arg_DL = 2,
+	arg_BL = 3,
+	arg_AH = 4,
+	arg_CH = 5,
+	arg_DH = 6,
+	arg_BH = 7,
+
+	arg_AX = 0,
+	arg_CX = 1,
+	arg_DX = 2,
+	arg_BX = 3,
+	arg_SP = 4,
+	arg_BP = 5,
+	arg_SI = 6,
+	arg_DI = 7,
+#ifdef __amd64__
+	arg_R8  = 8,
+	arg_R9  = 9,
+	arg_R10 = 10,
+	arg_R11 = 11,
+	arg_R12 = 12,
+	arg_R13 = 13,
+	arg_R14 = 14,
+	arg_R15 = 15
+#endif
+};
+
+static unsigned char *get_reg_w8(int no, struct pt_regs *regs)
+{
+	unsigned char *rv = NULL;
+
+	switch (no) {
+	case arg_AL:
+		rv = (unsigned char *)&regs->ax;
+		break;
+	case arg_BL:
+		rv = (unsigned char *)&regs->bx;
+		break;
+	case arg_CL:
+		rv = (unsigned char *)&regs->cx;
+		break;
+	case arg_DL:
+		rv = (unsigned char *)&regs->dx;
+		break;
+	case arg_AH:
+		rv = 1 + (unsigned char *)&regs->ax;
+		break;
+	case arg_BH:
+		rv = 1 + (unsigned char *)&regs->bx;
+		break;
+	case arg_CH:
+		rv = 1 + (unsigned char *)&regs->cx;
+		break;
+	case arg_DH:
+		rv = 1 + (unsigned char *)&regs->dx;
+		break;
+#ifdef __amd64__
+	case arg_R8:
+		rv = (unsigned char *)&regs->r8;
+		break;
+	case arg_R9:
+		rv = (unsigned char *)&regs->r9;
+		break;
+	case arg_R10:
+		rv = (unsigned char *)&regs->r10;
+		break;
+	case arg_R11:
+		rv = (unsigned char *)&regs->r11;
+		break;
+	case arg_R12:
+		rv = (unsigned char *)&regs->r12;
+		break;
+	case arg_R13:
+		rv = (unsigned char *)&regs->r13;
+		break;
+	case arg_R14:
+		rv = (unsigned char *)&regs->r14;
+		break;
+	case arg_R15:
+		rv = (unsigned char *)&regs->r15;
+		break;
+#endif
+	default:
+		printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no);
+		break;
+	}
+	return rv;
+}
+
+static unsigned long *get_reg_w32(int no, struct pt_regs *regs)
+{
+	unsigned long *rv = NULL;
+
+	switch (no) {
+	case arg_AX:
+		rv = &regs->ax;
+		break;
+	case arg_BX:
+		rv = &regs->bx;
+		break;
+	case arg_CX:
+		rv = &regs->cx;
+		break;
+	case arg_DX:
+		rv = &regs->dx;
+		break;
+	case arg_SP:
+		rv = &regs->sp;
+		break;
+	case arg_BP:
+		rv = &regs->bp;
+		break;
+	case arg_SI:
+		rv = &regs->si;
+		break;
+	case arg_DI:
+		rv = &regs->di;
+		break;
+#ifdef __amd64__
+	case arg_R8:
+		rv = &regs->r8;
+		break;
+	case arg_R9:
+		rv = &regs->r9;
+		break;
+	case arg_R10:
+		rv = &regs->r10;
+		break;
+	case arg_R11:
+		rv = &regs->r11;
+		break;
+	case arg_R12:
+		rv = &regs->r12;
+		break;
+	case arg_R13:
+		rv = &regs->r13;
+		break;
+	case arg_R14:
+		rv = &regs->r14;
+		break;
+	case arg_R15:
+		rv = &regs->r15;
+		break;
+#endif
+	default:
+		printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no);
+	}
+
+	return rv;
+}
+
+unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs)
+{
+	unsigned int opcode;
+	unsigned char mod_rm;
+	int reg;
+	unsigned char *p;
+	int i, shorted, enlarged, rexr;
+	unsigned long rv;
+
+	p = (unsigned char *)ins_addr;
+	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += get_opcode(p, &opcode);
+	for (i = 0; i < ARRAY_SIZE(reg_rop); i++)
+		if (reg_rop[i] == opcode) {
+			rv = REG_READ;
+			goto do_work;
+		}
+
+	for (i = 0; i < ARRAY_SIZE(reg_wop); i++)
+		if (reg_wop[i] == opcode) {
+			rv = REG_WRITE;
+			goto do_work;
+		}
+
+	printk(KERN_ERR "mmiotrace: Not a register instruction, opcode "
+							"0x%02x\n", opcode);
+	goto err;
+
+do_work:
+	mod_rm = *p;
+	reg = ((mod_rm >> 3) & 0x7) | (rexr << 3);
+	switch (get_ins_reg_width(ins_addr)) {
+	case 1:
+		return *get_reg_w8(reg, regs);
+
+	case 2:
+		return *(unsigned short *)get_reg_w32(reg, regs);
+
+	case 4:
+		return *(unsigned int *)get_reg_w32(reg, regs);
+
+#ifdef __amd64__
+	case 8:
+		return *(unsigned long *)get_reg_w32(reg, regs);
+#endif
+
+	default:
+		printk(KERN_ERR "mmiotrace: Error width# %d\n", reg);
+	}
+
+err:
+	return 0;
+}
+
+unsigned long get_ins_imm_val(unsigned long ins_addr)
+{
+	unsigned int opcode;
+	unsigned char mod_rm;
+	unsigned char mod;
+	unsigned char *p;
+	int i, shorted, enlarged, rexr;
+	unsigned long rv;
+
+	p = (unsigned char *)ins_addr;
+	p += skip_prefix(p, &shorted, &enlarged, &rexr);
+	p += get_opcode(p, &opcode);
+	for (i = 0; i < ARRAY_SIZE(imm_wop); i++)
+		if (imm_wop[i] == opcode) {
+			rv = IMM_WRITE;
+			goto do_work;
+		}
+
+	printk(KERN_ERR "mmiotrace: Not an immediate instruction, opcode "
+							"0x%02x\n", opcode);
+	goto err;
+
+do_work:
+	mod_rm = *p;
+	mod = mod_rm >> 6;
+	p++;
+	switch (mod) {
+	case 0:
+		/* if r/m is 5 we have a 32 disp (IA32 Manual 3, Table 2-2)  */
+		/* AMD64: XXX Check for address size prefix? */
+		if ((mod_rm & 0x7) == 0x5)
+			p += 4;
+		break;
+
+	case 1:
+		p += 1;
+		break;
+
+	case 2:
+		p += 4;
+		break;
+
+	case 3:
+	default:
+		printk(KERN_ERR "mmiotrace: not a memory access instruction "
+						"at 0x%lx, rm_mod=0x%02x\n",
+						ins_addr, mod_rm);
+	}
+
+	switch (get_ins_reg_width(ins_addr)) {
+	case 1:
+		return *(unsigned char *)p;
+
+	case 2:
+		return *(unsigned short *)p;
+
+	case 4:
+		return *(unsigned int *)p;
+
+#ifdef __amd64__
+	case 8:
+		return *(unsigned long *)p;
+#endif
+
+	default:
+		printk(KERN_ERR "mmiotrace: Error: width.\n");
+	}
+
+err:
+	return 0;
+}
diff --git a/arch/x86/mm/pf_in.h b/arch/x86/mm/pf_in.h
new file mode 100644
index 000000000000..e05341a51a27
--- /dev/null
+++ b/arch/x86/mm/pf_in.h
@@ -0,0 +1,39 @@
+/*
+ *  Fault Injection Test harness (FI)
+ *  Copyright (C) Intel Crop.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307,
+ *  USA.
+ *
+ */
+
+#ifndef __PF_H_
+#define __PF_H_
+
+enum reason_type {
+	NOT_ME,	/* page fault is not in regions */
+	NOTHING,	/* access others point in regions */
+	REG_READ,	/* read from addr to reg */
+	REG_WRITE,	/* write from reg to addr */
+	IMM_WRITE,	/* write from imm to addr */
+	OTHERS	/* Other instructions can not intercept */
+};
+
+enum reason_type get_ins_type(unsigned long ins_addr);
+unsigned int get_ins_mem_width(unsigned long ins_addr);
+unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs);
+unsigned long get_ins_imm_val(unsigned long ins_addr);
+
+#endif /* __PF_H_ */
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 50159764f694..557b2abceef8 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -2,6 +2,7 @@
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/tlb.h>
+#include <asm/fixmap.h>
 
 pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
 {
@@ -65,12 +66,6 @@ static inline void pgd_list_del(pgd_t *pgd)
 static void pgd_ctor(void *p)
 {
 	pgd_t *pgd = p;
-	unsigned long flags;
-
-	/* Clear usermode parts of PGD */
-	memset(pgd, 0, KERNEL_PGD_BOUNDARY*sizeof(pgd_t));
-
-	spin_lock_irqsave(&pgd_lock, flags);
 
 	/* If the pgd points to a shared pagetable level (either the
 	   ptes in non-PAE, or shared PMD in PAE), then just copy the
@@ -90,8 +85,6 @@ static void pgd_ctor(void *p)
 	/* list required to sync kernel mapping updates */
 	if (!SHARED_KERNEL_PMD)
 		pgd_list_add(pgd);
-
-	spin_unlock_irqrestore(&pgd_lock, flags);
 }
 
 static void pgd_dtor(void *pgd)
@@ -119,6 +112,72 @@ static void pgd_dtor(void *pgd)
 
 #ifdef CONFIG_X86_PAE
 /*
+ * In PAE mode, we need to do a cr3 reload (=tlb flush) when
+ * updating the top-level pagetable entries to guarantee the
+ * processor notices the update.  Since this is expensive, and
+ * all 4 top-level entries are used almost immediately in a
+ * new process's life, we just pre-populate them here.
+ *
+ * Also, if we're in a paravirt environment where the kernel pmd is
+ * not shared between pagetables (!SHARED_KERNEL_PMDS), we allocate
+ * and initialize the kernel pmds here.
+ */
+#define PREALLOCATED_PMDS	UNSHARED_PTRS_PER_PGD
+
+void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
+{
+	paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT);
+
+	/* Note: almost everything apart from _PAGE_PRESENT is
+	   reserved at the pmd (PDPT) level. */
+	set_pud(pudp, __pud(__pa(pmd) | _PAGE_PRESENT));
+
+	/*
+	 * According to Intel App note "TLBs, Paging-Structure Caches,
+	 * and Their Invalidation", April 2007, document 317080-001,
+	 * section 8.1: in PAE mode we explicitly have to flush the
+	 * TLB via cr3 if the top-level pgd is changed...
+	 */
+	if (mm == current->active_mm)
+		write_cr3(read_cr3());
+}
+#else  /* !CONFIG_X86_PAE */
+
+/* No need to prepopulate any pagetable entries in non-PAE modes. */
+#define PREALLOCATED_PMDS	0
+
+#endif	/* CONFIG_X86_PAE */
+
+static void free_pmds(pmd_t *pmds[])
+{
+	int i;
+
+	for(i = 0; i < PREALLOCATED_PMDS; i++)
+		if (pmds[i])
+			free_page((unsigned long)pmds[i]);
+}
+
+static int preallocate_pmds(pmd_t *pmds[])
+{
+	int i;
+	bool failed = false;
+
+	for(i = 0; i < PREALLOCATED_PMDS; i++) {
+		pmd_t *pmd = (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+		if (pmd == NULL)
+			failed = true;
+		pmds[i] = pmd;
+	}
+
+	if (failed) {
+		free_pmds(pmds);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
  * Mop up any pmd pages which may still be attached to the pgd.
  * Normally they will be freed by munmap/exit_mmap, but any pmd we
  * preallocate which never got a corresponding vma will need to be
@@ -128,7 +187,7 @@ static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
 {
 	int i;
 
-	for(i = 0; i < UNSHARED_PTRS_PER_PGD; i++) {
+	for(i = 0; i < PREALLOCATED_PMDS; i++) {
 		pgd_t pgd = pgdp[i];
 
 		if (pgd_val(pgd) != 0) {
@@ -142,32 +201,17 @@ static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
 	}
 }
 
-/*
- * In PAE mode, we need to do a cr3 reload (=tlb flush) when
- * updating the top-level pagetable entries to guarantee the
- * processor notices the update.  Since this is expensive, and
- * all 4 top-level entries are used almost immediately in a
- * new process's life, we just pre-populate them here.
- *
- * Also, if we're in a paravirt environment where the kernel pmd is
- * not shared between pagetables (!SHARED_KERNEL_PMDS), we allocate
- * and initialize the kernel pmds here.
- */
-static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd)
+static void pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmds[])
 {
 	pud_t *pud;
 	unsigned long addr;
 	int i;
 
 	pud = pud_offset(pgd, 0);
- 	for (addr = i = 0; i < UNSHARED_PTRS_PER_PGD;
-	     i++, pud++, addr += PUD_SIZE) {
-		pmd_t *pmd = pmd_alloc_one(mm, addr);
 
-		if (!pmd) {
-			pgd_mop_up_pmds(mm, pgd);
-			return 0;
-		}
+ 	for (addr = i = 0; i < PREALLOCATED_PMDS;
+	     i++, pud++, addr += PUD_SIZE) {
+		pmd_t *pmd = pmds[i];
 
 		if (i >= KERNEL_PGD_BOUNDARY)
 			memcpy(pmd, (pmd_t *)pgd_page_vaddr(swapper_pg_dir[i]),
@@ -175,61 +219,54 @@ static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd)
 
 		pud_populate(mm, pud, pmd);
 	}
-
-	return 1;
 }
 
-void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
+pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT);
+	pgd_t *pgd;
+	pmd_t *pmds[PREALLOCATED_PMDS];
+	unsigned long flags;
 
-	/* Note: almost everything apart from _PAGE_PRESENT is
-	   reserved at the pmd (PDPT) level. */
-	set_pud(pudp, __pud(__pa(pmd) | _PAGE_PRESENT));
+	pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
 
-	/*
-	 * According to Intel App note "TLBs, Paging-Structure Caches,
-	 * and Their Invalidation", April 2007, document 317080-001,
-	 * section 8.1: in PAE mode we explicitly have to flush the
-	 * TLB via cr3 if the top-level pgd is changed...
-	 */
-	if (mm == current->active_mm)
-		write_cr3(read_cr3());
-}
-#else  /* !CONFIG_X86_PAE */
-/* No need to prepopulate any pagetable entries in non-PAE modes. */
-static int pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd)
-{
-	return 1;
-}
+	if (pgd == NULL)
+		goto out;
 
-static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgd)
-{
-}
-#endif	/* CONFIG_X86_PAE */
+	mm->pgd = pgd;
 
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+	if (preallocate_pmds(pmds) != 0)
+		goto out_free_pgd;
 
-	/* so that alloc_pmd can use it */
-	mm->pgd = pgd;
-	if (pgd)
-		pgd_ctor(pgd);
+	if (paravirt_pgd_alloc(mm) != 0)
+		goto out_free_pmds;
 
-	if (pgd && !pgd_prepopulate_pmd(mm, pgd)) {
-		pgd_dtor(pgd);
-		free_page((unsigned long)pgd);
-		pgd = NULL;
-	}
+	/*
+	 * Make sure that pre-populating the pmds is atomic with
+	 * respect to anything walking the pgd_list, so that they
+	 * never see a partially populated pgd.
+	 */
+	spin_lock_irqsave(&pgd_lock, flags);
+
+	pgd_ctor(pgd);
+	pgd_prepopulate_pmd(mm, pgd, pmds);
+
+	spin_unlock_irqrestore(&pgd_lock, flags);
 
 	return pgd;
+
+out_free_pmds:
+	free_pmds(pmds);
+out_free_pgd:
+	free_page((unsigned long)pgd);
+out:
+	return NULL;
 }
 
 void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
 	pgd_mop_up_pmds(mm, pgd);
 	pgd_dtor(pgd);
+	paravirt_pgd_free(mm, pgd);
 	free_page((unsigned long)pgd);
 }
 
@@ -255,7 +292,7 @@ int ptep_test_and_clear_young(struct vm_area_struct *vma,
 
 	if (pte_young(*ptep))
 		ret = test_and_clear_bit(_PAGE_BIT_ACCESSED,
-					 &ptep->pte);
+					 (unsigned long *) &ptep->pte);
 
 	if (ret)
 		pte_update(vma->vm_mm, addr, ptep);
@@ -274,3 +311,22 @@ int ptep_clear_flush_young(struct vm_area_struct *vma,
 
 	return young;
 }
+
+int fixmaps_set;
+
+void __native_set_fixmap(enum fixed_addresses idx, pte_t pte)
+{
+	unsigned long address = __fix_to_virt(idx);
+
+	if (idx >= __end_of_fixed_addresses) {
+		BUG();
+		return;
+	}
+	set_pte_vaddr(address, pte);
+	fixmaps_set++;
+}
+
+void native_set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
+{
+	__native_set_fixmap(idx, pfn_pte(phys >> PAGE_SHIFT, flags));
+}
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 369cf065b6a4..cab0abbd1ebe 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -20,58 +20,11 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-	unsigned long flags;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-					global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-					global_page_state(NR_PAGETABLE));
-}
-
 /*
  * Associate a virtual page frame with a given physical page frame 
  * and protection flags for that frame.
  */ 
-static void set_pte_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+void set_pte_vaddr(unsigned long vaddr, pte_t pteval)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -94,8 +47,8 @@ static void set_pte_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
 		return;
 	}
 	pte = pte_offset_kernel(pmd, vaddr);
-	if (pgprot_val(flags))
-		set_pte_present(&init_mm, vaddr, pte, pfn_pte(pfn, flags));
+	if (pte_val(pteval))
+		set_pte_present(&init_mm, vaddr, pte, pteval);
 	else
 		pte_clear(&init_mm, vaddr, pte);
 
@@ -141,22 +94,9 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
 	__flush_tlb_one(vaddr);
 }
 
-static int fixmaps;
 unsigned long __FIXADDR_TOP = 0xfffff000;
 EXPORT_SYMBOL(__FIXADDR_TOP);
 
-void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
-{
-	unsigned long address = __fix_to_virt(idx);
-
-	if (idx >= __end_of_fixed_addresses) {
-		BUG();
-		return;
-	}
-	set_pte_pfn(address, phys >> PAGE_SHIFT, flags);
-	fixmaps++;
-}
-
 /**
  * reserve_top_address - reserves a hole in the top of kernel address space
  * @reserve - size of hole to reserve
@@ -164,11 +104,44 @@ void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
  * Can be used to relocate the fixmap area and poke a hole in the top
  * of kernel address space to make room for a hypervisor.
  */
-void reserve_top_address(unsigned long reserve)
+void __init reserve_top_address(unsigned long reserve)
 {
-	BUG_ON(fixmaps > 0);
+	BUG_ON(fixmaps_set > 0);
 	printk(KERN_INFO "Reserving virtual address space above 0x%08x\n",
 	       (int)-reserve);
 	__FIXADDR_TOP = -reserve - PAGE_SIZE;
 	__VMALLOC_RESERVE += reserve;
 }
+
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the
+ * vmalloc area - the default is 128m.
+ */
+static int __init parse_vmalloc(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	__VMALLOC_RESERVE = memparse(arg, &arg);
+	return 0;
+}
+early_param("vmalloc", parse_vmalloc);
+
+/*
+ * reservetop=size reserves a hole at the top of the kernel address space which
+ * a hypervisor can load into later.  Needed for dynamically loaded hypervisors,
+ * so relocating the fixmap can be done before paging initialization.
+ */
+static int __init parse_reservetop(char *arg)
+{
+	unsigned long address;
+
+	if (!arg)
+		return -EINVAL;
+
+	address = memparse(arg, &arg);
+	reserve_top_address(address);
+	return 0;
+}
+early_param("reservetop", parse_reservetop);
diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/mm/srat_32.c
index 70e4a374b4e8..1eb2973a301c 100644
--- a/arch/x86/kernel/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -31,6 +31,7 @@
 #include <asm/srat.h>
 #include <asm/topology.h>
 #include <asm/smp.h>
+#include <asm/e820.h>
 
 /*
  * proximity macros and definitions
@@ -41,7 +42,7 @@
 #define BMAP_TEST(bmap, bit)	((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit)))
 /* bitmap length; _PXM is at most 255 */
 #define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) 
-static u8 pxm_bitmap[PXM_BITMAP_LEN];	/* bitmap of proximity domains */
+static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN];	/* bitmap of proximity domains */
 
 #define MAX_CHUNKS_PER_NODE	3
 #define MAXCHUNKS		(MAX_CHUNKS_PER_NODE * MAX_NUMNODES)
@@ -52,16 +53,37 @@ struct node_memory_chunk_s {
 	u8	nid;		// which cnode contains this chunk?
 	u8	bank;		// which mem bank on this node
 };
-static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS];
+static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS];
 
-static int num_memory_chunks;		/* total number of memory chunks */
+static int __initdata num_memory_chunks; /* total number of memory chunks */
 static u8 __initdata apicid_to_pxm[MAX_APICID];
 
+int numa_off __initdata;
+int acpi_numa __initdata;
+
+static __init void bad_srat(void)
+{
+        printk(KERN_ERR "SRAT: SRAT not used.\n");
+        acpi_numa = -1;
+	num_memory_chunks = 0;
+}
+
+static __init inline int srat_disabled(void)
+{
+	return numa_off || acpi_numa < 0;
+}
+
 /* Identify CPU proximity domains */
-static void __init parse_cpu_affinity_structure(char *p)
+void __init
+acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity)
 {
-	struct acpi_srat_cpu_affinity *cpu_affinity =
-				(struct acpi_srat_cpu_affinity *) p;
+	if (srat_disabled())
+		return;
+	if (cpu_affinity->header.length !=
+	     sizeof(struct acpi_srat_cpu_affinity)) {
+		bad_srat();
+		return;
+	}
 
 	if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0)
 		return;		/* empty entry */
@@ -71,7 +93,7 @@ static void __init parse_cpu_affinity_structure(char *p)
 
 	apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
 
-	printk("CPU 0x%02X in proximity domain 0x%02X\n",
+	printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n",
 		cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
 }
 
@@ -79,14 +101,21 @@ static void __init parse_cpu_affinity_structure(char *p)
  * Identify memory proximity domains and hot-remove capabilities.
  * Fill node memory chunk list structure.
  */
-static void __init parse_memory_affinity_structure (char *sratp)
+void __init
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity)
 {
 	unsigned long long paddr, size;
 	unsigned long start_pfn, end_pfn;
 	u8 pxm;
 	struct node_memory_chunk_s *p, *q, *pend;
-	struct acpi_srat_mem_affinity *memory_affinity =
-			(struct acpi_srat_mem_affinity *) sratp;
+
+	if (srat_disabled())
+		return;
+	if (memory_affinity->header.length !=
+	     sizeof(struct acpi_srat_mem_affinity)) {
+		bad_srat();
+		return;
+	}
 
 	if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0)
 		return;		/* empty entry */
@@ -105,7 +134,8 @@ static void __init parse_memory_affinity_structure (char *sratp)
 
 
 	if (num_memory_chunks >= MAXCHUNKS) {
-		printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n",
+		printk(KERN_WARNING "Too many mem chunks in SRAT."
+			" Ignoring %lld MBytes at %llx\n",
 			size/(1024*1024), paddr);
 		return;
 	}
@@ -126,14 +156,22 @@ static void __init parse_memory_affinity_structure (char *sratp)
 
 	num_memory_chunks++;
 
-	printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n",
+	printk(KERN_DEBUG "Memory range %08lx to %08lx"
+			  " in proximity domain %02x %s\n",
 		start_pfn, end_pfn,
-		memory_affinity->memory_type,
 		pxm,
 		((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
 		 "enabled and removable" : "enabled" ) );
 }
 
+/* Callback for SLIT parsing */
+void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
+{
+}
+
+void acpi_numa_arch_fixup(void)
+{
+}
 /*
  * The SRAT table always lists ascending addresses, so can always
  * assume that the first "start" address that you see is the real
@@ -149,7 +187,7 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c
 	 * *possible* memory hotplug areas the same as normal RAM.
 	 */
 	if (memory_chunk->start_pfn >= max_pfn) {
-		printk (KERN_INFO "Ignoring SRAT pfns: 0x%08lx -> %08lx\n",
+		printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
 			memory_chunk->start_pfn, memory_chunk->end_pfn);
 		return;
 	}
@@ -166,42 +204,17 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c
 		node_end_pfn[nid] = memory_chunk->end_pfn;
 }
 
-/* Parse the ACPI Static Resource Affinity Table */
-static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
+int __init get_memcfg_from_srat(void)
 {
-	u8 *start, *end, *p;
 	int i, j, nid;
 
-	start = (u8 *)(&(sratp->reserved) + 1);	/* skip header */
-	p = start;
-	end = (u8 *)sratp + sratp->header.length;
 
-	memset(pxm_bitmap, 0, sizeof(pxm_bitmap));	/* init proximity domain bitmap */
-	memset(node_memory_chunk, 0, sizeof(node_memory_chunk));
-
-	num_memory_chunks = 0;
-	while (p < end) {
-		switch (*p) {
-		case ACPI_SRAT_TYPE_CPU_AFFINITY:
-			parse_cpu_affinity_structure(p);
-			break;
-		case ACPI_SRAT_TYPE_MEMORY_AFFINITY:
-			parse_memory_affinity_structure(p);
-			break;
-		default:
-			printk("ACPI 2.0 SRAT: unknown entry skipped: type=0x%02X, len=%d\n", p[0], p[1]);
-			break;
-		}
-		p += p[1];
-		if (p[1] == 0) {
-			printk("acpi20_parse_srat: Entry length value is zero;"
-				" can't parse any further!\n");
-			break;
-		}
-	}
+	if (srat_disabled())
+		goto out_fail;
 
 	if (num_memory_chunks == 0) {
-		printk("could not finy any ACPI SRAT memory areas.\n");
+		printk(KERN_WARNING
+			 "could not finy any ACPI SRAT memory areas.\n");
 		goto out_fail;
 	}
 
@@ -228,131 +241,39 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
 	for (i = 0; i < num_memory_chunks; i++)
 		node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm);
 
-	printk("pxm bitmap: ");
+	printk(KERN_DEBUG "pxm bitmap: ");
 	for (i = 0; i < sizeof(pxm_bitmap); i++) {
-		printk("%02X ", pxm_bitmap[i]);
+		printk(KERN_CONT "%02x ", pxm_bitmap[i]);
 	}
-	printk("\n");
-	printk("Number of logical nodes in system = %d\n", num_online_nodes());
-	printk("Number of memory chunks in system = %d\n", num_memory_chunks);
+	printk(KERN_CONT "\n");
+	printk(KERN_DEBUG "Number of logical nodes in system = %d\n",
+			 num_online_nodes());
+	printk(KERN_DEBUG "Number of memory chunks in system = %d\n",
+			 num_memory_chunks);
 
 	for (i = 0; i < MAX_APICID; i++)
 		apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]);
 
 	for (j = 0; j < num_memory_chunks; j++){
 		struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
-		printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
+		printk(KERN_DEBUG
+			"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
 		       j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
 		node_read_chunk(chunk->nid, chunk);
-		add_active_range(chunk->nid, chunk->start_pfn, chunk->end_pfn);
+		e820_register_active_regions(chunk->nid, chunk->start_pfn,
+					     min(chunk->end_pfn, max_pfn));
 	}
- 
+
 	for_each_online_node(nid) {
 		unsigned long start = node_start_pfn[nid];
-		unsigned long end = node_end_pfn[nid];
+		unsigned long end = min(node_end_pfn[nid], max_pfn);
 
 		memory_present(nid, start, end);
 		node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
 	}
 	return 1;
 out_fail:
-	return 0;
-}
-
-struct acpi_static_rsdt {
-	struct acpi_table_rsdt table;
-	u32 padding[7]; /* Allow for 7 more table entries */
-};
-
-int __init get_memcfg_from_srat(void)
-{
-	struct acpi_table_header *header = NULL;
-	struct acpi_table_rsdp *rsdp = NULL;
-	struct acpi_table_rsdt *rsdt = NULL;
-	acpi_native_uint rsdp_address = 0;
-	struct acpi_static_rsdt saved_rsdt;
-	int tables = 0;
-	int i = 0;
-
-	rsdp_address = acpi_os_get_root_pointer();
-	if (!rsdp_address) {
-		printk("%s: System description tables not found\n",
-		       __func__);
-		goto out_err;
-	}
-
-	printk("%s: assigning address to rsdp\n", __func__);
-	rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address;
-	if (!rsdp) {
-		printk("%s: Didn't find ACPI root!\n", __func__);
-		goto out_err;
-	}
-
-	printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision,
-		rsdp->oem_id);
-
-	if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) {
-		printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __func__);
-		goto out_err;
-	}
-
-	rsdt = (struct acpi_table_rsdt *)
-	    early_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt));
-
-	if (!rsdt) {
-		printk(KERN_WARNING
-		       "%s: ACPI: Invalid root system description tables (RSDT)\n",
-		       __func__);
-		goto out_err;
-	}
-
-	header = &rsdt->header;
-
-	if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) {
-		printk(KERN_WARNING "ACPI: RSDT signature incorrect\n");
-		goto out_err;
-	}
-
-	/* 
-	 * The number of tables is computed by taking the 
-	 * size of all entries (header size minus total 
-	 * size of RSDT) divided by the size of each entry
-	 * (4-byte table pointers).
-	 */
-	tables = (header->length - sizeof(struct acpi_table_header)) / 4;
-
-	if (!tables)
-		goto out_err;
-
-	memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt));
-
-	if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) {
-		printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n",
-		       saved_rsdt.table.header.length);
-		goto out_err;
-	}
-
-	printk("Begin SRAT table scan....\n");
-
-	for (i = 0; i < tables; i++) {
-		/* Map in header, then map in full table length. */
-		header = (struct acpi_table_header *)
-			early_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header));
-		if (!header)
-			break;
-		header = (struct acpi_table_header *)
-			early_ioremap(saved_rsdt.table.table_offset_entry[i], header->length);
-		if (!header)
-			break;
-
-		if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4))
-			continue;
-
-		/* we've found the srat table. don't need to look at any more tables */
-		return acpi20_parse_srat((struct acpi_table_srat *)header);
-	}
-out_err:
-	remove_all_active_ranges();
-	printk("failed to get NUMA memory information from SRAT table\n");
+	printk(KERN_ERR "failed to get NUMA memory information from SRAT"
+			" table\n");
 	return 0;
 }
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 99649dccad28..1b4763e26ea9 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -100,7 +100,19 @@ static __init inline int srat_disabled(void)
 /* Callback for SLIT parsing */
 void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
 {
-	acpi_slit = slit;
+	unsigned length;
+	unsigned long phys;
+
+	length = slit->header.length;
+	phys = find_e820_area(0, max_pfn_mapped<<PAGE_SHIFT, length,
+		 PAGE_SIZE);
+
+	if (phys == -1L)
+		panic(" Can not save slit!\n");
+
+	acpi_slit = __va(phys);
+	memcpy(acpi_slit, slit, length);
+	reserve_early(phys, phys + length, "ACPI SLIT");
 }
 
 /* Callback for Proximity Domain -> LAPIC mapping */
@@ -299,7 +311,7 @@ static int __init nodes_cover_memory(const struct bootnode *nodes)
 			pxmram = 0;
 	}
 
-	e820ram = end_pfn - absent_pages_in_range(0, end_pfn);
+	e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
 	/* We seem to lose 3 pages somewhere. Allow a bit of slack. */
 	if ((long)(e820ram - pxmram) >= 1*1024*1024) {
 		printk(KERN_ERR
@@ -376,7 +388,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		if (node == NUMA_NO_NODE)
 			continue;
 		if (!node_isset(node, node_possible_map))
-			numa_set_node(i, NUMA_NO_NODE);
+			numa_clear_node(i);
 	}
 	numa_init_array();
 	return 0;
@@ -495,6 +507,7 @@ int __node_distance(int a, int b)
 
 EXPORT_SYMBOL(__node_distance);
 
+#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY)
 int memory_add_physaddr_to_nid(u64 start)
 {
 	int i, ret = 0;
@@ -506,4 +519,4 @@ int memory_add_physaddr_to_nid(u64 start)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-
+#endif
diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c
new file mode 100644
index 000000000000..d877c5b423ef
--- /dev/null
+++ b/arch/x86/mm/testmmiotrace.c
@@ -0,0 +1,71 @@
+/*
+ * Written by Pekka Paalanen, 2008 <pq@iki.fi>
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+#define MODULE_NAME "testmmiotrace"
+
+static unsigned long mmio_address;
+module_param(mmio_address, ulong, 0);
+MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB.");
+
+static void do_write_test(void __iomem *p)
+{
+	unsigned int i;
+	for (i = 0; i < 256; i++)
+		iowrite8(i, p + i);
+	for (i = 1024; i < (5 * 1024); i += 2)
+		iowrite16(i * 12 + 7, p + i);
+	for (i = (5 * 1024); i < (16 * 1024); i += 4)
+		iowrite32(i * 212371 + 13, p + i);
+}
+
+static void do_read_test(void __iomem *p)
+{
+	unsigned int i;
+	for (i = 0; i < 256; i++)
+		ioread8(p + i);
+	for (i = 1024; i < (5 * 1024); i += 2)
+		ioread16(p + i);
+	for (i = (5 * 1024); i < (16 * 1024); i += 4)
+		ioread32(p + i);
+}
+
+static void do_test(void)
+{
+	void __iomem *p = ioremap_nocache(mmio_address, 0x4000);
+	if (!p) {
+		pr_err(MODULE_NAME ": could not ioremap, aborting.\n");
+		return;
+	}
+	do_write_test(p);
+	do_read_test(p);
+	iounmap(p);
+}
+
+static int __init init(void)
+{
+	if (mmio_address == 0) {
+		pr_err(MODULE_NAME ": you have to use the module argument "
+							"mmio_address.\n");
+		pr_err(MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS"
+				" YOU REALLY KNOW WHAT YOU ARE DOING!\n");
+		return -ENXIO;
+	}
+
+	pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx "
+					"in PCI address space, and writing "
+					"rubbish in there.\n", mmio_address);
+	do_test();
+	return 0;
+}
+
+static void __exit cleanup(void)
+{
+	pr_debug(MODULE_NAME ": unloaded.\n");
+}
+
+module_init(init);
+module_exit(cleanup);
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index cc48d3fde545..3f90289410e6 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -218,8 +218,8 @@ static int nmi_setup(void)
 		}
 
 	}
-	on_each_cpu(nmi_save_registers, NULL, 0, 1);
-	on_each_cpu(nmi_cpu_setup, NULL, 0, 1);
+	on_each_cpu(nmi_save_registers, NULL, 1);
+	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
 	return 0;
 }
@@ -269,12 +269,13 @@ static void nmi_cpu_shutdown(void *dummy)
 
 static void nmi_shutdown(void)
 {
-	struct op_msrs *msrs = &__get_cpu_var(cpu_msrs);
+	struct op_msrs *msrs = &get_cpu_var(cpu_msrs);
 	nmi_enabled = 0;
-	on_each_cpu(nmi_cpu_shutdown, NULL, 0, 1);
+	on_each_cpu(nmi_cpu_shutdown, NULL, 1);
 	unregister_die_notifier(&profile_exceptions_nb);
 	model->shutdown(msrs);
 	free_msrs();
+	put_cpu_var(cpu_msrs);
 }
 
 static void nmi_cpu_start(void *dummy)
@@ -285,7 +286,7 @@ static void nmi_cpu_start(void *dummy)
 
 static int nmi_start(void)
 {
-	on_each_cpu(nmi_cpu_start, NULL, 0, 1);
+	on_each_cpu(nmi_cpu_start, NULL, 1);
 	return 0;
 }
 
@@ -297,7 +298,7 @@ static void nmi_cpu_stop(void *dummy)
 
 static void nmi_stop(void)
 {
-	on_each_cpu(nmi_cpu_stop, NULL, 0, 1);
+	on_each_cpu(nmi_cpu_stop, NULL, 1);
 }
 
 struct op_counter_config counter_config[OP_MAX_COUNTER];
@@ -368,20 +369,34 @@ static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
-	if (cpu_model == 14)
+	switch (cpu_model) {
+	case 0 ... 2:
+		*cpu_type = "i386/ppro";
+		break;
+	case 3 ... 5:
+		*cpu_type = "i386/pii";
+		break;
+	case 6 ... 8:
+		*cpu_type = "i386/piii";
+		break;
+	case 9:
+		*cpu_type = "i386/p6_mobile";
+		break;
+	case 10 ... 13:
+		*cpu_type = "i386/p6";
+		break;
+	case 14:
 		*cpu_type = "i386/core";
-	else if (cpu_model == 15 || cpu_model == 23)
+		break;
+	case 15: case 23:
+		*cpu_type = "i386/core_2";
+		break;
+	case 26:
 		*cpu_type = "i386/core_2";
-	else if (cpu_model > 0xd)
+		break;
+	default:
+		/* Unknown */
 		return 0;
-	else if (cpu_model == 9) {
-		*cpu_type = "i386/p6_mobile";
-	} else if (cpu_model > 5) {
-		*cpu_type = "i386/piii";
-	} else if (cpu_model > 2) {
-		*cpu_type = "i386/pii";
-	} else {
-		*cpu_type = "i386/ppro";
 	}
 
 	model = &op_ppro_spec;
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index c5c8e485fc44..d49202e740ea 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -1,5 +1,17 @@
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/pci/Makefile_32
-else
-include ${srctree}/arch/x86/pci/Makefile_64
-endif
+obj-y				:= i386.o init.o
+
+obj-$(CONFIG_PCI_BIOS)		+= pcbios.o
+obj-$(CONFIG_PCI_MMCONFIG)	+= mmconfig_$(BITS).o direct.o mmconfig-shared.o
+obj-$(CONFIG_PCI_DIRECT)	+= direct.o
+obj-$(CONFIG_PCI_OLPC)		+= olpc.o
+
+obj-y				+= fixup.o
+obj-$(CONFIG_ACPI)		+= acpi.o
+obj-y				+= legacy.o irq.o
+
+obj-$(CONFIG_X86_VISWS)		+= visws.o
+
+obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
+
+obj-y				+= common.o early.o
+obj-y				+= amd_bus.o
diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
deleted file mode 100644
index 89ec35d00efd..000000000000
--- a/arch/x86/pci/Makefile_32
+++ /dev/null
@@ -1,24 +0,0 @@
-obj-y				:= i386.o init.o
-
-obj-$(CONFIG_PCI_BIOS)		+= pcbios.o
-obj-$(CONFIG_PCI_MMCONFIG)	+= mmconfig_32.o direct.o mmconfig-shared.o
-obj-$(CONFIG_PCI_DIRECT)	+= direct.o
-obj-$(CONFIG_PCI_OLPC)		+= olpc.o
-
-pci-y				:= fixup.o
-
-# Do not change the ordering here. There is a nasty init function
-# ordering dependency which breaks when you move acpi.o below
-# legacy/irq.o
-pci-$(CONFIG_ACPI)		+= acpi.o
-pci-y				+= legacy.o irq.o
-
-# Careful: VISWS and NUMAQ overrule the pci-y above. The colons are
-# therefor correct. This needs a proper fix by distangling the code.
-pci-$(CONFIG_X86_VISWS)		:= visws.o fixup.o
-pci-$(CONFIG_X86_NUMAQ)		:= numa.o irq.o
-
-# Necessary for NUMAQ as well
-pci-$(CONFIG_NUMA)		+= mp_bus_to_node.o
-
-obj-y				+= $(pci-y) common.o early.o
diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64
deleted file mode 100644
index 8fbd19832cf6..000000000000
--- a/arch/x86/pci/Makefile_64
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for X86_64 specific PCI routines
-#
-# Reuse the i386 PCI subsystem
-#
-EXTRA_CFLAGS += -Iarch/x86/pci
-
-obj-y		:= i386.o
-obj-$(CONFIG_PCI_DIRECT)+= direct.o
-obj-y		+= fixup.o init.o
-obj-$(CONFIG_ACPI)	+= acpi.o
-obj-y			+= legacy.o irq.o common.o early.o
-# mmconfig has a 64bit special
-obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o
-
-obj-y		+= k8-bus_64.o
-
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index d95de2f199cd..19af06927fbc 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -171,8 +171,11 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 	if (node != -1)
 		set_mp_bus_to_node(busnum, node);
 	else
-		node = get_mp_bus_to_node(busnum);
 #endif
+		node = get_mp_bus_to_node(busnum);
+
+	if (node != -1 && !node_online(node))
+		node = -1;
 
 	/* Allocate per-root-bus (not per bus) arch-specific data.
 	 * TODO: leak; this memory is never freed.
@@ -204,22 +207,23 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 	if (!bus)
 		kfree(sd);
 
+	if (bus && node != -1) {
 #ifdef CONFIG_ACPI_NUMA
-	if (bus) {
-		if (pxm >= 0) {
+		if (pxm >= 0)
 			printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n",
-				busnum, pxm, pxm_to_node(pxm));
-		}
-	}
+				busnum, pxm, node);
+#else
+		printk(KERN_DEBUG "bus %02x -> node %d\n",
+			busnum, node);
 #endif
+	}
 
 	if (bus && (pci_probe & PCI_USE__CRS))
 		get_current_resources(device, busnum, domain, bus);
 	return bus;
 }
 
-extern int pci_routeirq;
-static int __init pci_acpi_init(void)
+int __init pci_acpi_init(void)
 {
 	struct pci_dev *dev = NULL;
 
@@ -253,4 +257,3 @@ static int __init pci_acpi_init(void)
 
 	return 0;
 }
-subsys_initcall(pci_acpi_init);
diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/amd_bus.c
index 5c2799c20e47..dbf532369711 100644
--- a/arch/x86/pci/k8-bus_64.c
+++ b/arch/x86/pci/amd_bus.c
@@ -1,40 +1,25 @@
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/topology.h>
+#include "pci.h"
+
+#ifdef CONFIG_X86_64
 #include <asm/pci-direct.h>
 #include <asm/mpspec.h>
 #include <linux/cpumask.h>
-#include <linux/topology.h>
+#endif
 
 /*
  * This discovers the pcibus <-> node mapping on AMD K8.
  * also get peer root bus resource for io,mmio
  */
 
-
-/*
- * sub bus (transparent) will use entres from 3 to store extra from root,
- * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
- */
-#define RES_NUM 16
-struct pci_root_info {
-	char name[12];
-	unsigned int res_num;
-	struct resource res[RES_NUM];
-	int bus_min;
-	int bus_max;
-	int node;
-	int link;
-};
-
-/* 4 at this time, it may become to 32 */
-#define PCI_ROOT_NR 4
-static int pci_root_num;
-static struct pci_root_info pci_root_info[PCI_ROOT_NR];
-
 #ifdef CONFIG_NUMA
 
 #define BUS_NR 256
 
+#ifdef CONFIG_X86_64
+
 static int mp_bus_to_node[BUS_NR];
 
 void set_mp_bus_to_node(int busnum, int node)
@@ -61,7 +46,52 @@ int get_mp_bus_to_node(int busnum)
 
 	return node;
 }
-#endif
+
+#else /* CONFIG_X86_32 */
+
+static unsigned char mp_bus_to_node[BUS_NR];
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+	mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return 0;
+	node = mp_bus_to_node[busnum];
+	return node;
+}
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* CONFIG_NUMA */
+
+#ifdef CONFIG_X86_64
+
+/*
+ * sub bus (transparent) will use entres from 3 to store extra from root,
+ * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
+ */
+#define RES_NUM 16
+struct pci_root_info {
+	char name[12];
+	unsigned int res_num;
+	struct resource res[RES_NUM];
+	int bus_min;
+	int bus_max;
+	int node;
+	int link;
+};
+
+/* 4 at this time, it may become to 32 */
+#define PCI_ROOT_NR 4
+static int pci_root_num;
+static struct pci_root_info pci_root_info[PCI_ROOT_NR];
 
 void set_pci_bus_resources_arch_default(struct pci_bus *b)
 {
@@ -384,7 +414,7 @@ static int __init early_fill_mp_bus_info(void)
 	/* need to take out [0, TOM) for RAM*/
 	address = MSR_K8_TOP_MEM1;
 	rdmsrl(address, val);
-	end = (val & 0xffffff8000000ULL);
+	end = (val & 0xffffff800000ULL);
 	printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
 	if (end < (1ULL<<32))
 		update_range(range, 0, end - 1);
@@ -478,7 +508,7 @@ static int __init early_fill_mp_bus_info(void)
 		/* TOP_MEM2 */
 		address = MSR_K8_TOP_MEM2;
 		rdmsrl(address, val);
-		end = (val & 0xffffff8000000ULL);
+		end = (val & 0xffffff800000ULL);
 		printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
 		update_range(range, 1ULL<<32, end - 1);
 	}
@@ -526,3 +556,31 @@ static int __init early_fill_mp_bus_info(void)
 }
 
 postcore_initcall(early_fill_mp_bus_info);
+
+#endif
+
+/* common 32/64 bit code */
+
+#define ENABLE_CF8_EXT_CFG      (1ULL << 46)
+
+static void enable_pci_io_ecs_per_cpu(void *unused)
+{
+	u64 reg;
+	rdmsrl(MSR_AMD64_NB_CFG, reg);
+	if (!(reg & ENABLE_CF8_EXT_CFG)) {
+		reg |= ENABLE_CF8_EXT_CFG;
+		wrmsrl(MSR_AMD64_NB_CFG, reg);
+	}
+}
+
+static int __init enable_pci_io_ecs(void)
+{
+	/* assume all cpus from fam10h have IO ECS */
+        if (boot_cpu_data.x86 < 0x10)
+		return 0;
+	on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1);
+	pci_probe |= PCI_HAS_IO_ECS;
+	return 0;
+}
+
+postcore_initcall(enable_pci_io_ecs);
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 6e64aaf00d1d..b67732bbb85a 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -20,6 +20,7 @@
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 				PCI_PROBE_MMCONF;
 
+unsigned int pci_early_dump_regs;
 static int pci_bf_sort;
 int pci_routeirq;
 int pcibios_last_bus = -1;
@@ -31,7 +32,7 @@ struct pci_raw_ops *raw_pci_ext_ops;
 int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 *val)
 {
-	if (reg < 256 && raw_pci_ops)
+	if (domain == 0 && reg < 256 && raw_pci_ops)
 		return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
 	if (raw_pci_ext_ops)
 		return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
@@ -41,7 +42,7 @@ int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 val)
 {
-	if (reg < 256 && raw_pci_ops)
+	if (domain == 0 && reg < 256 && raw_pci_ops)
 		return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
 	if (raw_pci_ext_ops)
 		return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
@@ -121,6 +122,21 @@ void __init dmi_check_skip_isa_align(void)
 	dmi_check_system(can_skip_pciprobe_dmi_table);
 }
 
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+	struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
+
+	if (pci_probe & PCI_NOASSIGN_ROMS) {
+		if (rom_r->parent)
+			return;
+		if (rom_r->start) {
+			/* we deal with BIOS assigned ROM later */
+			return;
+		}
+		rom_r->start = rom_r->end = rom_r->flags = 0;
+	}
+}
+
 /*
  *  Called after each bus is probed, but before its children
  *  are examined.
@@ -128,7 +144,11 @@ void __init dmi_check_skip_isa_align(void)
 
 void __devinit  pcibios_fixup_bus(struct pci_bus *b)
 {
+	struct pci_dev *dev;
+
 	pci_read_bridge_bases(b);
+	list_for_each_entry(dev, &b->devices, bus_list)
+		pcibios_fixup_device_resources(dev);
 }
 
 /*
@@ -384,7 +404,7 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum)
 
 extern u8 pci_cache_line_size;
 
-static int __init pcibios_init(void)
+int __init pcibios_init(void)
 {
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
@@ -411,8 +431,6 @@ static int __init pcibios_init(void)
 	return 0;
 }
 
-subsys_initcall(pcibios_init);
-
 char * __devinit  pcibios_setup(char *str)
 {
 	if (!strcmp(str, "off")) {
@@ -483,12 +501,18 @@ char * __devinit  pcibios_setup(char *str)
 	else if (!strcmp(str, "rom")) {
 		pci_probe |= PCI_ASSIGN_ROMS;
 		return NULL;
+	} else if (!strcmp(str, "norom")) {
+		pci_probe |= PCI_NOASSIGN_ROMS;
+		return NULL;
 	} else if (!strcmp(str, "assign-busses")) {
 		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 		return NULL;
 	} else if (!strcmp(str, "use_crs")) {
 		pci_probe |= PCI_USE__CRS;
 		return NULL;
+	} else if (!strcmp(str, "earlydump")) {
+		pci_early_dump_regs = 1;
+		return NULL;
 	} else if (!strcmp(str, "routeirq")) {
 		pci_routeirq = 1;
 		return NULL;
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index 21d1e0e0d535..9915293500fb 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -8,18 +8,21 @@
 #include "pci.h"
 
 /*
- * Functions for accessing PCI configuration space with type 1 accesses
+ * Functions for accessing PCI base (first 256 bytes) and extended
+ * (4096 bytes per PCI function) configuration space with type 1
+ * accesses.
  */
 
 #define PCI_CONF1_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
+	(0x80000000 | ((reg & 0xF00) << 16) | (bus << 16) \
+	| (devfn << 8) | (reg & 0xFC))
 
 static int pci_conf1_read(unsigned int seg, unsigned int bus,
 			  unsigned int devfn, int reg, int len, u32 *value)
 {
 	unsigned long flags;
 
-	if ((bus > 255) || (devfn > 255) || (reg > 255)) {
+	if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
 		*value = -1;
 		return -EINVAL;
 	}
@@ -50,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
 {
 	unsigned long flags;
 
-	if ((bus > 255) || (devfn > 255) || (reg > 255)) 
+	if ((bus > 255) || (devfn > 255) || (reg > 4095))
 		return -EINVAL;
 
 	spin_lock_irqsave(&pci_config_lock, flags);
@@ -260,10 +263,18 @@ void __init pci_direct_init(int type)
 		return;
 	printk(KERN_INFO "PCI: Using configuration type %d for base access\n",
 		 type);
-	if (type == 1)
+	if (type == 1) {
 		raw_pci_ops = &pci_direct_conf1;
-	else
-		raw_pci_ops = &pci_direct_conf2;
+		if (raw_pci_ext_ops)
+			return;
+		if (!(pci_probe & PCI_HAS_IO_ECS))
+			return;
+		printk(KERN_INFO "PCI: Using configuration type 1 "
+		       "for extended access\n");
+		raw_pci_ext_ops = &pci_direct_conf1;
+		return;
+	}
+	raw_pci_ops = &pci_direct_conf2;
 }
 
 int __init pci_direct_probe(void)
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index 42df4b6606df..86631ccbc25a 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -7,15 +7,13 @@
 /* Direct PCI access. This is used for PCI accesses in early boot before
    the PCI subsystem works. */
 
-#define PDprintk(x...)
-
 u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
 {
 	u32 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inl(0xcfc);
 	if (v != 0xffffffff)
-		PDprintk("%x reading 4 from %x: %x\n", slot, offset, v);
+		pr_debug("%x reading 4 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
@@ -24,7 +22,7 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
 	u8 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inb(0xcfc + (offset&3));
-	PDprintk("%x reading 1 from %x: %x\n", slot, offset, v);
+	pr_debug("%x reading 1 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
@@ -33,23 +31,30 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
 	u16 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inw(0xcfc + (offset&2));
-	PDprintk("%x reading 2 from %x: %x\n", slot, offset, v);
+	pr_debug("%x reading 2 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
 void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
 				    u32 val)
 {
-	PDprintk("%x writing to %x: %x\n", slot, offset, val);
+	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	outl(val, 0xcfc);
 }
 
 void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
 {
-	PDprintk("%x writing to %x: %x\n", slot, offset, val);
+	pr_debug("%x writing to %x: %x\n", slot, offset, val);
+	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+	outb(val, 0xcfc + (offset&3));
+}
+
+void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
+{
+	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
-	outb(val, 0xcfc);
+	outw(val, 0xcfc + (offset&2));
 }
 
 int early_pci_allowed(void)
@@ -57,3 +62,54 @@ int early_pci_allowed(void)
 	return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) ==
 			PCI_PROBE_CONF1;
 }
+
+void early_dump_pci_device(u8 bus, u8 slot, u8 func)
+{
+	int i;
+	int j;
+	u32 val;
+
+	printk(KERN_INFO "PCI: %02x:%02x:%02x", bus, slot, func);
+
+	for (i = 0; i < 256; i += 4) {
+		if (!(i & 0x0f))
+			printk("\n%04x:",i);
+
+		val = read_pci_config(bus, slot, func, i);
+		for (j = 0; j < 4; j++) {
+			printk(" %02x", val & 0xff);
+			val >>= 8;
+		}
+	}
+	printk("\n");
+}
+
+void early_dump_pci_devices(void)
+{
+	unsigned bus, slot, func;
+
+	if (!early_pci_allowed())
+		return;
+
+	for (bus = 0; bus < 256; bus++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
+				u32 class;
+				u8 type;
+				class = read_pci_config(bus, slot, func,
+							PCI_CLASS_REVISION);
+				if (class == 0xffffffff)
+					break;
+
+				early_dump_pci_device(bus, slot, func);
+
+				/* No multi-function device? */
+				type = read_pci_config_byte(bus, slot, func,
+							       PCI_HEADER_TYPE);
+				if (!(type & 0x80))
+					break;
+			}
+		}
+	}
+}
+
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 10fb308fded8..a09505806b82 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -280,6 +280,7 @@ static void pci_track_mmap_page_range(struct vm_area_struct *vma)
 static struct vm_operations_struct pci_mmap_ops = {
 	.open  = pci_track_mmap_page_range,
 	.close = pci_unmap_page_range,
+	.access = generic_access_phys,
 };
 
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
@@ -299,9 +300,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 		return -EINVAL;
 
 	prot = pgprot_val(vma->vm_page_prot);
-	if (pat_wc_enabled && write_combine)
+	if (pat_enabled && write_combine)
 		prot |= _PAGE_CACHE_WC;
-	else if (pat_wc_enabled || boot_cpu_data.x86 > 3)
+	else if (pat_enabled || boot_cpu_data.x86 > 3)
 		/*
 		 * ioremap() and ioremap_nocache() defaults to UC MINUS for now.
 		 * To avoid attribute conflicts, request UC MINUS here
@@ -334,7 +335,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 		flags = new_flags;
 	}
 
-	if (vma->vm_pgoff <= max_pfn_mapped &&
+	if (((vma->vm_pgoff < max_low_pfn_mapped) ||
+	     (vma->vm_pgoff >= (1UL<<(32 - PAGE_SHIFT)) &&
+	      vma->vm_pgoff < max_pfn_mapped)) &&
 	    ioremap_change_attr((unsigned long)__va(addr), len, flags)) {
 		free_memtype(addr, addr + len);
 		return -EINVAL;
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index b821f4462d99..d6c950f81858 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -4,7 +4,7 @@
 
 /* arch_initcall has too random ordering, so call the initializers
    in the right sequence from here. */
-static __init int pci_access_init(void)
+static __init int pci_arch_init(void)
 {
 #ifdef CONFIG_PCI_DIRECT
 	int type = 0;
@@ -40,4 +40,4 @@ static __init int pci_access_init(void)
 
 	return 0;
 }
-arch_initcall(pci_access_init);
+arch_initcall(pci_arch_init);
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index ca8df9c260bc..6a06a2eb0597 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -11,8 +11,8 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/dmi.h>
-#include <asm/io.h>
-#include <asm/smp.h>
+#include <linux/io.h>
+#include <linux/smp.h>
 #include <asm/io_apic.h>
 #include <linux/irq.h>
 #include <linux/acpi.h>
@@ -45,7 +45,8 @@ struct irq_router {
 	char *name;
 	u16 vendor, device;
 	int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
-	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
+	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq,
+		int new);
 };
 
 struct irq_router_handler {
@@ -61,7 +62,7 @@ void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
  *  and perform checksum verification.
  */
 
-static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
+static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
 {
 	struct irq_routing_table *rt;
 	int i;
@@ -74,10 +75,11 @@ static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
 	    rt->size < sizeof(struct irq_routing_table))
 		return NULL;
 	sum = 0;
-	for (i=0; i < rt->size; i++)
+	for (i = 0; i < rt->size; i++)
 		sum += addr[i];
 	if (!sum) {
-		DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
+		DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n",
+			rt);
 		return rt;
 	}
 	return NULL;
@@ -100,7 +102,7 @@ static struct irq_routing_table * __init pirq_find_routing_table(void)
 			return rt;
 		printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
 	}
-	for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
+	for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
 		rt = pirq_check_routing_table(addr);
 		if (rt)
 			return rt;
@@ -122,20 +124,20 @@ static void __init pirq_peer_trick(void)
 	struct irq_info *e;
 
 	memset(busmap, 0, sizeof(busmap));
-	for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
+	for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
 		e = &rt->slots[i];
 #ifdef DEBUG
 		{
 			int j;
 			DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
-			for(j=0; j<4; j++)
+			for (j = 0; j < 4; j++)
 				DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
 			DBG("\n");
 		}
 #endif
 		busmap[e->bus] = 1;
 	}
-	for(i = 1; i < 256; i++) {
+	for (i = 1; i < 256; i++) {
 		int node;
 		if (!busmap[i] || pci_find_bus(0, i))
 			continue;
@@ -183,7 +185,8 @@ static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset,
 	return (nr & 1) ? (x >> 4) : (x & 0xf);
 }
 
-static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val)
+static void write_config_nybble(struct pci_dev *router, unsigned offset,
+	unsigned nr, unsigned int val)
 {
 	u8 x;
 	unsigned reg = offset + (nr >> 1);
@@ -285,7 +288,7 @@ static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 	static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
 
 	WARN_ON_ONCE(pirq > 4);
-	return read_config_nybble(router,0x43, pirqmap[pirq-1]);
+	return read_config_nybble(router, 0x43, pirqmap[pirq-1]);
 }
 
 static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
@@ -314,7 +317,7 @@ static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 
 /*
  * Cyrix: nibble offset 0x5C
- * 0x5C bits 7:4 is INTB bits 3:0 is INTA 
+ * 0x5C bits 7:4 is INTB bits 3:0 is INTA
  * 0x5D bits 7:4 is INTD bits 3:0 is INTC
  */
 static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
@@ -350,7 +353,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
  *	Apparently there are systems implementing PCI routing table using
  *	link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
  *	We try our best to handle both link mappings.
- *	
+ *
  *	Currently (2003-05-21) it appears most SiS chipsets follow the
  *	definition of routing registers from the SiS-5595 southbridge.
  *	According to the SiS 5595 datasheets the revision id's of the
@@ -370,7 +373,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
  *
  *	0x62:	USBIRQ:
  *		bit 6 OHCI function disabled (0), enabled (1)
- *	
+ *
  *	0x6a:	ACPI/SCI IRQ: bits 4-6 reserved
  *
  *	0x7e:	Data Acq. Module IRQ - bits 4-6 reserved
@@ -467,7 +470,8 @@ static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int
 	return inb(0xc01) & 0xf;
 }
 
-static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev,
+	int pirq, int irq)
 {
 	outb(pirq, 0xc00);
 	outb(irq, 0xc01);
@@ -487,9 +491,7 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 	u8 irq;
 	irq = 0;
 	if (pirq <= 4)
-	{
 		irq = read_config_nybble(router, 0x56, pirq - 1);
-	}
 	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
 		dev->vendor, dev->device, pirq, irq);
 	return irq;
@@ -497,12 +499,10 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", 
+	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
 		dev->vendor, dev->device, pirq, irq);
 	if (pirq <= 4)
-	{
 		write_config_nybble(router, 0x56, pirq - 1, irq);
-	}
 	return 1;
 }
 
@@ -549,50 +549,49 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	if (pci_dev_present(pirq_440gx))
 		return 0;
 
-	switch(device)
-	{
-		case PCI_DEVICE_ID_INTEL_82371FB_0:
-		case PCI_DEVICE_ID_INTEL_82371SB_0:
-		case PCI_DEVICE_ID_INTEL_82371AB_0:
-		case PCI_DEVICE_ID_INTEL_82371MX:
-		case PCI_DEVICE_ID_INTEL_82443MX_0:
-		case PCI_DEVICE_ID_INTEL_82801AA_0:
-		case PCI_DEVICE_ID_INTEL_82801AB_0:
-		case PCI_DEVICE_ID_INTEL_82801BA_0:
-		case PCI_DEVICE_ID_INTEL_82801BA_10:
-		case PCI_DEVICE_ID_INTEL_82801CA_0:
-		case PCI_DEVICE_ID_INTEL_82801CA_12:
-		case PCI_DEVICE_ID_INTEL_82801DB_0:
-		case PCI_DEVICE_ID_INTEL_82801E_0:
-		case PCI_DEVICE_ID_INTEL_82801EB_0:
-		case PCI_DEVICE_ID_INTEL_ESB_1:
-		case PCI_DEVICE_ID_INTEL_ICH6_0:
-		case PCI_DEVICE_ID_INTEL_ICH6_1:
-		case PCI_DEVICE_ID_INTEL_ICH7_0:
-		case PCI_DEVICE_ID_INTEL_ICH7_1:
-		case PCI_DEVICE_ID_INTEL_ICH7_30:
-		case PCI_DEVICE_ID_INTEL_ICH7_31:
-		case PCI_DEVICE_ID_INTEL_ESB2_0:
-		case PCI_DEVICE_ID_INTEL_ICH8_0:
-		case PCI_DEVICE_ID_INTEL_ICH8_1:
-		case PCI_DEVICE_ID_INTEL_ICH8_2:
-		case PCI_DEVICE_ID_INTEL_ICH8_3:
-		case PCI_DEVICE_ID_INTEL_ICH8_4:
-		case PCI_DEVICE_ID_INTEL_ICH9_0:
-		case PCI_DEVICE_ID_INTEL_ICH9_1:
-		case PCI_DEVICE_ID_INTEL_ICH9_2:
-		case PCI_DEVICE_ID_INTEL_ICH9_3:
-		case PCI_DEVICE_ID_INTEL_ICH9_4:
-		case PCI_DEVICE_ID_INTEL_ICH9_5:
-		case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
-		case PCI_DEVICE_ID_INTEL_ICH10_0:
-		case PCI_DEVICE_ID_INTEL_ICH10_1:
-		case PCI_DEVICE_ID_INTEL_ICH10_2:
-		case PCI_DEVICE_ID_INTEL_ICH10_3:
-			r->name = "PIIX/ICH";
-			r->get = pirq_piix_get;
-			r->set = pirq_piix_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_INTEL_82371FB_0:
+	case PCI_DEVICE_ID_INTEL_82371SB_0:
+	case PCI_DEVICE_ID_INTEL_82371AB_0:
+	case PCI_DEVICE_ID_INTEL_82371MX:
+	case PCI_DEVICE_ID_INTEL_82443MX_0:
+	case PCI_DEVICE_ID_INTEL_82801AA_0:
+	case PCI_DEVICE_ID_INTEL_82801AB_0:
+	case PCI_DEVICE_ID_INTEL_82801BA_0:
+	case PCI_DEVICE_ID_INTEL_82801BA_10:
+	case PCI_DEVICE_ID_INTEL_82801CA_0:
+	case PCI_DEVICE_ID_INTEL_82801CA_12:
+	case PCI_DEVICE_ID_INTEL_82801DB_0:
+	case PCI_DEVICE_ID_INTEL_82801E_0:
+	case PCI_DEVICE_ID_INTEL_82801EB_0:
+	case PCI_DEVICE_ID_INTEL_ESB_1:
+	case PCI_DEVICE_ID_INTEL_ICH6_0:
+	case PCI_DEVICE_ID_INTEL_ICH6_1:
+	case PCI_DEVICE_ID_INTEL_ICH7_0:
+	case PCI_DEVICE_ID_INTEL_ICH7_1:
+	case PCI_DEVICE_ID_INTEL_ICH7_30:
+	case PCI_DEVICE_ID_INTEL_ICH7_31:
+	case PCI_DEVICE_ID_INTEL_ESB2_0:
+	case PCI_DEVICE_ID_INTEL_ICH8_0:
+	case PCI_DEVICE_ID_INTEL_ICH8_1:
+	case PCI_DEVICE_ID_INTEL_ICH8_2:
+	case PCI_DEVICE_ID_INTEL_ICH8_3:
+	case PCI_DEVICE_ID_INTEL_ICH8_4:
+	case PCI_DEVICE_ID_INTEL_ICH9_0:
+	case PCI_DEVICE_ID_INTEL_ICH9_1:
+	case PCI_DEVICE_ID_INTEL_ICH9_2:
+	case PCI_DEVICE_ID_INTEL_ICH9_3:
+	case PCI_DEVICE_ID_INTEL_ICH9_4:
+	case PCI_DEVICE_ID_INTEL_ICH9_5:
+	case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
+	case PCI_DEVICE_ID_INTEL_ICH10_0:
+	case PCI_DEVICE_ID_INTEL_ICH10_1:
+	case PCI_DEVICE_ID_INTEL_ICH10_2:
+	case PCI_DEVICE_ID_INTEL_ICH10_3:
+		r->name = "PIIX/ICH";
+		r->get = pirq_piix_get;
+		r->set = pirq_piix_set;
+		return 1;
 	}
 	return 0;
 }
@@ -606,7 +605,7 @@ static __init int via_router_probe(struct irq_router *r,
 	 * workarounds for some buggy BIOSes
 	 */
 	if (device == PCI_DEVICE_ID_VIA_82C586_0) {
-		switch(router->device) {
+		switch (router->device) {
 		case PCI_DEVICE_ID_VIA_82C686:
 			/*
 			 * Asus k7m bios wrongly reports 82C686A
@@ -631,7 +630,7 @@ static __init int via_router_probe(struct irq_router *r,
 		}
 	}
 
-	switch(device) {
+	switch (device) {
 	case PCI_DEVICE_ID_VIA_82C586_0:
 		r->name = "VIA";
 		r->get = pirq_via586_get;
@@ -654,28 +653,27 @@ static __init int via_router_probe(struct irq_router *r,
 
 static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_VLSI_82C534:
-			r->name = "VLSI 82C534";
-			r->get = pirq_vlsi_get;
-			r->set = pirq_vlsi_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_VLSI_82C534:
+		r->name = "VLSI 82C534";
+		r->get = pirq_vlsi_get;
+		r->set = pirq_vlsi_set;
+		return 1;
 	}
 	return 0;
 }
 
 
-static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int serverworks_router_probe(struct irq_router *r,
+		struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_SERVERWORKS_OSB4:
-		case PCI_DEVICE_ID_SERVERWORKS_CSB5:
-			r->name = "ServerWorks";
-			r->get = pirq_serverworks_get;
-			r->set = pirq_serverworks_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_SERVERWORKS_OSB4:
+	case PCI_DEVICE_ID_SERVERWORKS_CSB5:
+		r->name = "ServerWorks";
+		r->get = pirq_serverworks_get;
+		r->set = pirq_serverworks_set;
+		return 1;
 	}
 	return 0;
 }
@@ -684,7 +682,7 @@ static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router,
 {
 	if (device != PCI_DEVICE_ID_SI_503)
 		return 0;
-		
+
 	r->name = "SIS";
 	r->get = pirq_sis_get;
 	r->set = pirq_sis_set;
@@ -693,47 +691,43 @@ static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router,
 
 static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_CYRIX_5520:
-			r->name = "NatSemi";
-			r->get = pirq_cyrix_get;
-			r->set = pirq_cyrix_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_CYRIX_5520:
+		r->name = "NatSemi";
+		r->get = pirq_cyrix_get;
+		r->set = pirq_cyrix_set;
+		return 1;
 	}
 	return 0;
 }
 
 static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_OPTI_82C700:
-			r->name = "OPTI";
-			r->get = pirq_opti_get;
-			r->set = pirq_opti_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_OPTI_82C700:
+		r->name = "OPTI";
+		r->get = pirq_opti_get;
+		r->set = pirq_opti_set;
+		return 1;
 	}
 	return 0;
 }
 
 static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_ITE_IT8330G_0:
-			r->name = "ITE";
-			r->get = pirq_ite_get;
-			r->set = pirq_ite_set;
-			return 1;
+	switch (device) {
+	case PCI_DEVICE_ID_ITE_IT8330G_0:
+		r->name = "ITE";
+		r->get = pirq_ite_get;
+		r->set = pirq_ite_set;
+		return 1;
 	}
 	return 0;
 }
 
 static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
+	switch (device) {
 	case PCI_DEVICE_ID_AL_M1533:
 	case PCI_DEVICE_ID_AL_M1563:
 		printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
@@ -747,25 +741,24 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
 
 static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-	switch(device)
-	{
-		case PCI_DEVICE_ID_AMD_VIPER_740B:
-			r->name = "AMD756";
-			break;
-		case PCI_DEVICE_ID_AMD_VIPER_7413:
-			r->name = "AMD766";
-			break;
-		case PCI_DEVICE_ID_AMD_VIPER_7443:
-			r->name = "AMD768";
-			break;
-		default:
-			return 0;
+	switch (device) {
+	case PCI_DEVICE_ID_AMD_VIPER_740B:
+		r->name = "AMD756";
+		break;
+	case PCI_DEVICE_ID_AMD_VIPER_7413:
+		r->name = "AMD766";
+		break;
+	case PCI_DEVICE_ID_AMD_VIPER_7443:
+		r->name = "AMD768";
+		break;
+	default:
+		return 0;
 	}
 	r->get = pirq_amd756_get;
 	r->set = pirq_amd756_set;
 	return 1;
 }
-		
+
 static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
 	switch (device) {
@@ -807,7 +800,7 @@ static struct pci_dev *pirq_router_dev;
  *	FIXME: should we have an option to say "generic for
  *	chipset" ?
  */
- 
+
 static void __init pirq_find_router(struct irq_router *r)
 {
 	struct irq_routing_table *rt = pirq_table;
@@ -826,7 +819,7 @@ static void __init pirq_find_router(struct irq_router *r)
 	r->name = "default";
 	r->get = NULL;
 	r->set = NULL;
-	
+
 	DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n",
 	    rt->rtr_vendor, rt->rtr_device);
 
@@ -837,12 +830,14 @@ static void __init pirq_find_router(struct irq_router *r)
 		return;
 	}
 
-	for( h = pirq_routers; h->vendor; h++) {
+	for (h = pirq_routers; h->vendor; h++) {
 		/* First look for a router match */
-		if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
+		if (rt->rtr_vendor == h->vendor &&
+			h->probe(r, pirq_router_dev, rt->rtr_device))
 			break;
 		/* Fall back to a device match */
-		if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
+		if (pirq_router_dev->vendor == h->vendor &&
+			h->probe(r, pirq_router_dev, pirq_router_dev->device))
 			break;
 	}
 	printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
@@ -857,11 +852,13 @@ static void __init pirq_find_router(struct irq_router *r)
 static struct irq_info *pirq_get_info(struct pci_dev *dev)
 {
 	struct irq_routing_table *rt = pirq_table;
-	int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+	int entries = (rt->size - sizeof(struct irq_routing_table)) /
+		sizeof(struct irq_info);
 	struct irq_info *info;
 
 	for (info = rt->slots; entries--; info++)
-		if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
+		if (info->bus == dev->bus->number &&
+			PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
 			return info;
 	return NULL;
 }
@@ -889,7 +886,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 
 	if (!pirq_table)
 		return 0;
-	
+
 	DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
 	info = pirq_get_info(dev);
 	if (!info) {
@@ -902,7 +899,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		DBG(" -> not routed\n" KERN_DEBUG);
 		return 0;
 	}
-	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
+	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
+		pirq_table->exclusive_irqs);
 	mask &= pcibios_irq_mask;
 
 	/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -915,7 +913,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	}
 
 	/* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
-	if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) {
+	if (acer_tm360_irqrouting && dev->irq == 11 &&
+		dev->vendor == PCI_VENDOR_ID_O2) {
 		pirq = 0x68;
 		mask = 0x400;
 		dev->irq = r->get(pirq_router_dev, dev, pirq);
@@ -928,17 +927,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	 */
 	newirq = dev->irq;
 	if (newirq && !((1 << newirq) & mask)) {
-		if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
-		else printk("\n" KERN_WARNING
-			"PCI: IRQ %i for device %s doesn't match PIRQ mask "
-			"- try pci=usepirqmask\n" KERN_DEBUG, newirq,
-			pci_name(dev));
+		if (pci_probe & PCI_USE_PIRQ_MASK)
+			newirq = 0;
+		else
+			printk("\n" KERN_WARNING
+				"PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
+				KERN_DEBUG, newirq,
+				pci_name(dev));
 	}
 	if (!newirq && assign) {
 		for (i = 0; i < 16; i++) {
 			if (!(mask & (1 << i)))
 				continue;
-			if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED))
+			if (pirq_penalty[i] < pirq_penalty[newirq] &&
+				can_request_irq(i, IRQF_SHARED))
 				newirq = i;
 		}
 	}
@@ -949,12 +951,13 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		irq = pirq & 0xf;
 		DBG(" -> hardcoded IRQ %d\n", irq);
 		msg = "Hardcoded";
-	} else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
-	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) {
+	} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
+	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
 		DBG(" -> got IRQ %d\n", irq);
 		msg = "Found";
 		eisa_set_level_irq(irq);
-	} else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
+	} else if (newirq && r->set &&
+		(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
 		DBG(" -> assigning IRQ %d", newirq);
 		if (r->set(pirq_router_dev, dev, pirq, newirq)) {
 			eisa_set_level_irq(newirq);
@@ -972,7 +975,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		} else
 			return 0;
 	}
-	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev));
+	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
+		pci_name(dev));
 
 	/* Update IRQ for all devices with the same pirq value */
 	while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -984,20 +988,25 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		if (!info)
 			continue;
 		if (info->irq[pin].link == pirq) {
-			/* We refuse to override the dev->irq information. Give a warning! */
-		    	if ( dev2->irq && dev2->irq != irq && \
+			/*
+			 * We refuse to override the dev->irq
+			 * information. Give a warning!
+			 */
+			if (dev2->irq && dev2->irq != irq && \
 			(!(pci_probe & PCI_USE_PIRQ_MASK) || \
-			((1 << dev2->irq) & mask)) ) {
+			((1 << dev2->irq) & mask))) {
 #ifndef CONFIG_PCI_MSI
-		    		printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
+				printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
 				       pci_name(dev2), dev2->irq, irq);
 #endif
-		    		continue;
-		    	}
+				continue;
+			}
 			dev2->irq = irq;
 			pirq_penalty[irq]++;
 			if (dev != dev2)
-				printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2));
+				printk(KERN_INFO
+					"PCI: Sharing IRQ %d with %s\n",
+					irq, pci_name(dev2));
 		}
 	}
 	return 1;
@@ -1011,15 +1020,21 @@ static void __init pcibios_fixup_irqs(void)
 	DBG(KERN_DEBUG "PCI: IRQ fixup\n");
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		/*
-		 * If the BIOS has set an out of range IRQ number, just ignore it.
-		 * Also keep track of which IRQ's are already in use.
+		 * If the BIOS has set an out of range IRQ number, just
+		 * ignore it.  Also keep track of which IRQ's are
+		 * already in use.
 		 */
 		if (dev->irq >= 16) {
-			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
+				pci_name(dev), dev->irq);
 			dev->irq = 0;
 		}
-		/* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
-		if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000)
+		/*
+		 * If the IRQ is already assigned to a PCI device,
+		 * ignore its ISA use penalty
+		 */
+		if (pirq_penalty[dev->irq] >= 100 &&
+				pirq_penalty[dev->irq] < 100000)
 			pirq_penalty[dev->irq] = 0;
 		pirq_penalty[dev->irq]++;
 	}
@@ -1031,13 +1046,17 @@ static void __init pcibios_fixup_irqs(void)
 		/*
 		 * Recalculate IRQ numbers if we use the I/O APIC.
 		 */
-		if (io_apic_assign_pci_irqs)
-		{
+		if (io_apic_assign_pci_irqs) {
 			int irq;
 
 			if (pin) {
-				pin--;		/* interrupt pins are numbered starting from 1 */
-				irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
+				/*
+				 * interrupt pins are numbered starting
+				 * from 1
+				 */
+				pin--;
+				irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+					PCI_SLOT(dev->devfn), pin);
 	/*
 	 * Busses behind bridges are typically not listed in the MP-table.
 	 * In this case we have to look up the IRQ based on the parent bus,
@@ -1045,10 +1064,10 @@ static void __init pcibios_fixup_irqs(void)
 	 * busses itself so we should get into this branch reliably.
 	 */
 				if (irq < 0 && dev->bus->parent) { /* go back to the bridge */
-					struct pci_dev * bridge = dev->bus->self;
+					struct pci_dev *bridge = dev->bus->self;
 
 					pin = (pin + PCI_SLOT(dev->devfn)) % 4;
-					irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, 
+					irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 							PCI_SLOT(bridge->devfn), pin);
 					if (irq >= 0)
 						printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
@@ -1078,7 +1097,8 @@ static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d)
 {
 	if (!broken_hp_bios_irq9) {
 		broken_hp_bios_irq9 = 1;
-		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+			d->ident);
 	}
 	return 0;
 }
@@ -1091,7 +1111,8 @@ static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d)
 {
 	if (!acer_tm360_irqrouting) {
 		acer_tm360_irqrouting = 1;
-		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+			d->ident);
 	}
 	return 0;
 }
@@ -1103,7 +1124,8 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"),
+			DMI_MATCH(DMI_PRODUCT_VERSION,
+				"HP Pavilion Notebook Model GE"),
 			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
 		},
 	},
@@ -1118,7 +1140,7 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
 	{ }
 };
 
-static int __init pcibios_irq_init(void)
+int __init pcibios_irq_init(void)
 {
 	DBG(KERN_DEBUG "PCI: IRQ init\n");
 
@@ -1138,11 +1160,14 @@ static int __init pcibios_irq_init(void)
 		pirq_find_router(&pirq_router);
 		if (pirq_table->exclusive_irqs) {
 			int i;
-			for (i=0; i<16; i++)
+			for (i = 0; i < 16; i++)
 				if (!(pirq_table->exclusive_irqs & (1 << i)))
 					pirq_penalty[i] += 100;
 		}
-		/* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
+		/*
+		 * If we're using the I/O APIC, avoid using the PCI IRQ
+		 * routing table
+		 */
 		if (io_apic_assign_pci_irqs)
 			pirq_table = NULL;
 	}
@@ -1153,9 +1178,6 @@ static int __init pcibios_irq_init(void)
 	return 0;
 }
 
-subsys_initcall(pcibios_irq_init);
-
-
 static void pirq_penalize_isa_irq(int irq, int active)
 {
 	/*
@@ -1189,7 +1211,7 @@ static int pirq_enable_irq(struct pci_dev *dev)
 	if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
 		char *msg = "";
 
-		pin--;		/* interrupt pins are numbered starting from 1 */
+		pin--; /* interrupt pins are numbered starting from 1 */
 
 		if (io_apic_assign_pci_irqs) {
 			int irq;
@@ -1203,19 +1225,22 @@ static int pirq_enable_irq(struct pci_dev *dev)
 			 */
 			temp_dev = dev;
 			while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
-				struct pci_dev * bridge = dev->bus->self;
+				struct pci_dev *bridge = dev->bus->self;
 
 				pin = (pin + PCI_SLOT(dev->devfn)) % 4;
-				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, 
+				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 						PCI_SLOT(bridge->devfn), pin);
 				if (irq >= 0)
-					printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-						pci_name(bridge), 'A' + pin, irq);
+					printk(KERN_WARNING
+						"PCI: using PPB %s[%c] to get irq %d\n",
+						pci_name(bridge),
+						'A' + pin, irq);
 				dev = bridge;
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
-				printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
+				printk(KERN_INFO
+					"PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
 					pci_name(dev), 'A' + pin, irq);
 				dev->irq = irq;
 				return 0;
@@ -1226,12 +1251,17 @@ static int pirq_enable_irq(struct pci_dev *dev)
 		else
 			msg = " Please try using pci=biosirq.";
 
-		/* With IDE legacy devices the IRQ lookup failure is not a problem.. */
-		if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
+		/*
+		 * With IDE legacy devices the IRQ lookup failure is not
+		 * a problem..
+		 */
+		if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
+				!(dev->class & 0x5))
 			return 0;
 
-		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-		       'A' + pin, pci_name(dev), msg);
+		printk(KERN_WARNING
+			"PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
+			'A' + pin, pci_name(dev), msg);
 	}
 	return 0;
 }
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index a67921ce60af..ec9ce35e44d6 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -55,4 +55,21 @@ static int __init pci_legacy_init(void)
 	return 0;
 }
 
-subsys_initcall(pci_legacy_init);
+int __init pci_subsys_init(void)
+{
+#ifdef CONFIG_X86_NUMAQ
+	pci_numaq_init();
+#endif
+#ifdef CONFIG_ACPI
+	pci_acpi_init();
+#endif
+#ifdef CONFIG_X86_VISWS
+	pci_visws_init();
+#endif
+	pci_legacy_init();
+	pcibios_irq_init();
+	pcibios_init();
+
+	return 0;
+}
+subsys_initcall(pci_subsys_init);
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 0cfebecf2a8f..23faaa890ffc 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -374,7 +374,7 @@ reject:
 
 static int __initdata known_bridge;
 
-void __init __pci_mmcfg_init(int early)
+static void __init __pci_mmcfg_init(int early)
 {
 	/* MMCONFIG disabled */
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
diff --git a/arch/x86/pci/mp_bus_to_node.c b/arch/x86/pci/mp_bus_to_node.c
deleted file mode 100644
index 022943999b84..000000000000
--- a/arch/x86/pci/mp_bus_to_node.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/topology.h>
-
-#define BUS_NR 256
-
-static unsigned char mp_bus_to_node[BUS_NR];
-
-void set_mp_bus_to_node(int busnum, int node)
-{
-	if (busnum >= 0 &&  busnum < BUS_NR)
-	mp_bus_to_node[busnum] = (unsigned char) node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
-	int node;
-
-	if (busnum < 0 || busnum > (BUS_NR - 1))
-		return 0;
-	node = mp_bus_to_node[busnum];
-	return node;
-}
diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numaq_32.c
index d9afbae5092b..f4b16dc11dad 100644
--- a/arch/x86/pci/numa.c
+++ b/arch/x86/pci/numaq_32.c
@@ -1,50 +1,26 @@
 /*
- * numa.c - Low-level PCI access for NUMA-Q machines
+ * numaq_32.c - Low-level PCI access for NUMA-Q machines
  */
 
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/nodemask.h>
 #include <mach_apic.h>
+#include <asm/mpspec.h>
 #include "pci.h"
 
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
-int mp_bus_id_to_node[MAX_MP_BUSSES];
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
 
-int mp_bus_id_to_local[MAX_MP_BUSSES];
 #define BUS2LOCAL(global) (mp_bus_id_to_local[global])
 
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
 EXPORT_SYMBOL(xquad_portio);
-#endif
 
 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 
@@ -175,10 +151,13 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
 
-static int __init pci_numa_init(void)
+int __init pci_numaq_init(void)
 {
 	int quad;
 
+	if (!found_numaq)
+		return 0;
+
 	raw_pci_ops = &pci_direct_conf1_mq;
 
 	if (pcibios_scanned++)
@@ -197,5 +176,3 @@ static int __init pci_numa_init(void)
 		}
 	return 0;
 }
-
-subsys_initcall(pci_numa_init);
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index 720c4c554534..15b9cf6be729 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -27,6 +27,8 @@
 #define PCI_CAN_SKIP_ISA_ALIGN	0x8000
 #define PCI_USE__CRS		0x10000
 #define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
+#define PCI_HAS_IO_ECS		0x40000
+#define PCI_NOASSIGN_ROMS	0x80000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
@@ -38,9 +40,6 @@ enum pci_bf_sort_state {
 	pci_dmi_bf,
 };
 
-extern void __init dmi_check_pciprobe(void);
-extern void __init dmi_check_skip_isa_align(void);
-
 /* pci-i386.c */
 
 extern unsigned int pcibios_max_latency;
@@ -98,10 +97,20 @@ extern struct pci_raw_ops *raw_pci_ext_ops;
 
 extern struct pci_raw_ops pci_direct_conf1;
 
+/* arch_initcall level */
 extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
 extern int pci_olpc_init(void);
+extern void __init dmi_check_pciprobe(void);
+extern void __init dmi_check_skip_isa_align(void);
+
+/* some common used subsys_initcalls */
+extern int __init pci_acpi_init(void);
+extern int __init pcibios_irq_init(void);
+extern int __init pci_visws_init(void);
+extern int __init pci_numaq_init(void);
+extern int __init pcibios_init(void);
 
 /* pci-mmconfig.c */
 
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index c2df4e97eed6..42f4cb19faca 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -8,18 +8,19 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 
-#include "cobalt.h"
-#include "lithium.h"
+#include <asm/setup.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
 
 #include "pci.h"
 
 static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
 static void pci_visws_disable_irq(struct pci_dev *dev) { }
 
-int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq;
-void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq;
+/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */
+/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */
 
-void __init pcibios_penalize_isa_irq(int irq, int active) {}
+/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */
 
 
 unsigned int pci_bus0, pci_bus1;
@@ -85,8 +86,14 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
 
-static int __init pcibios_init(void)
+int __init pci_visws_init(void)
 {
+	if (!is_visws_box())
+		return -1;
+
+	pcibios_enable_irq = &pci_visws_enable_irq;
+	pcibios_disable_irq = &pci_visws_disable_irq;
+
 	/* The VISWS supports configuration access type 1 only */
 	pci_probe = (pci_probe | PCI_PROBE_CONF1) &
 		    ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
@@ -104,5 +111,3 @@ static int __init pcibios_init(void)
 	pcibios_resource_survey();
 	return 0;
 }
-
-subsys_initcall(pcibios_init);
diff --git a/arch/x86/power/hibernate_64.c b/arch/x86/power/hibernate_64.c
index b542355e0e34..6dd000dd7933 100644
--- a/arch/x86/power/hibernate_64.c
+++ b/arch/x86/power/hibernate_64.c
@@ -83,7 +83,7 @@ static int set_up_temporary_mappings(void)
 
 	/* Set up the direct mapping from scratch */
 	start = (unsigned long)pfn_to_kaddr(0);
-	end = (unsigned long)pfn_to_kaddr(end_pfn);
+	end = (unsigned long)pfn_to_kaddr(max_pfn);
 
 	for (; start < end; start = next) {
 		pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC);
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index b7ad9f89d21f..4d6ef0a336d6 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -62,7 +62,7 @@ $(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE
 # Build multiple 32-bit vDSO images to choose from at boot time.
 #
 obj-$(VDSO32-y)			+= vdso32-syms.lds
-vdso32.so-$(CONFIG_X86_32)	+= int80
+vdso32.so-$(VDSO32-y)		+= int80
 vdso32.so-$(CONFIG_COMPAT)	+= syscall
 vdso32.so-$(VDSO32-y)		+= sysenter
 
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index efa2ba7c6005..1ef0f90813d6 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -23,7 +23,7 @@
 
 #define gtod vdso_vsyscall_gtod_data
 
-static long vdso_fallback_gettime(long clock, struct timespec *ts)
+notrace static long vdso_fallback_gettime(long clock, struct timespec *ts)
 {
 	long ret;
 	asm("syscall" : "=a" (ret) :
@@ -31,7 +31,7 @@ static long vdso_fallback_gettime(long clock, struct timespec *ts)
 	return ret;
 }
 
-static inline long vgetns(void)
+notrace static inline long vgetns(void)
 {
 	long v;
 	cycles_t (*vread)(void);
@@ -40,7 +40,7 @@ static inline long vgetns(void)
 	return (v * gtod->clock.mult) >> gtod->clock.shift;
 }
 
-static noinline int do_realtime(struct timespec *ts)
+notrace static noinline int do_realtime(struct timespec *ts)
 {
 	unsigned long seq, ns;
 	do {
@@ -54,7 +54,8 @@ static noinline int do_realtime(struct timespec *ts)
 }
 
 /* Copy of the version in kernel/time.c which we cannot directly access */
-static void vset_normalized_timespec(struct timespec *ts, long sec, long nsec)
+notrace static void
+vset_normalized_timespec(struct timespec *ts, long sec, long nsec)
 {
 	while (nsec >= NSEC_PER_SEC) {
 		nsec -= NSEC_PER_SEC;
@@ -68,7 +69,7 @@ static void vset_normalized_timespec(struct timespec *ts, long sec, long nsec)
 	ts->tv_nsec = nsec;
 }
 
-static noinline int do_monotonic(struct timespec *ts)
+notrace static noinline int do_monotonic(struct timespec *ts)
 {
 	unsigned long seq, ns, secs;
 	do {
@@ -82,7 +83,7 @@ static noinline int do_monotonic(struct timespec *ts)
 	return 0;
 }
 
-int __vdso_clock_gettime(clockid_t clock, struct timespec *ts)
+notrace int __vdso_clock_gettime(clockid_t clock, struct timespec *ts)
 {
 	if (likely(gtod->sysctl_enabled && gtod->clock.vread))
 		switch (clock) {
@@ -96,7 +97,7 @@ int __vdso_clock_gettime(clockid_t clock, struct timespec *ts)
 int clock_gettime(clockid_t, struct timespec *)
 	__attribute__((weak, alias("__vdso_clock_gettime")));
 
-int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
+notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
 {
 	long ret;
 	if (likely(gtod->sysctl_enabled && gtod->clock.vread)) {
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index cf058fecfcee..513f330c5832 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -193,30 +193,16 @@ static __init void relocate_vdso(Elf32_Ehdr *ehdr)
 	}
 }
 
-/*
- * These symbols are defined by vdso32.S to mark the bounds
- * of the ELF DSO images included therein.
- */
-extern const char vdso32_default_start, vdso32_default_end;
-extern const char vdso32_sysenter_start, vdso32_sysenter_end;
 static struct page *vdso32_pages[1];
 
 #ifdef CONFIG_X86_64
 
-static int use_sysenter __read_mostly = -1;
-
-#define	vdso32_sysenter()	(use_sysenter > 0)
+#define	vdso32_sysenter()	(boot_cpu_has(X86_FEATURE_SYSENTER32))
+#define	vdso32_syscall()	(boot_cpu_has(X86_FEATURE_SYSCALL32))
 
 /* May not be __init: called during resume */
 void syscall32_cpu_init(void)
 {
-	if (use_sysenter < 0) {
-		if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
-			use_sysenter = 1;
-		if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR)
-			use_sysenter = 1;
-	}
-
 	/* Load these always in case some future AMD CPU supports
 	   SYSENTER from compat mode too. */
 	checking_wrmsrl(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
@@ -235,6 +221,7 @@ static inline void map_compat_vdso(int map)
 #else  /* CONFIG_X86_32 */
 
 #define vdso32_sysenter()	(boot_cpu_has(X86_FEATURE_SEP))
+#define vdso32_syscall()	(0)
 
 void enable_sep_cpu(void)
 {
@@ -305,12 +292,15 @@ int __init sysenter_setup(void)
 	gate_vma_init();
 #endif
 
-	if (!vdso32_sysenter()) {
-		vsyscall = &vdso32_default_start;
-		vsyscall_len = &vdso32_default_end - &vdso32_default_start;
-	} else {
+	if (vdso32_syscall()) {
+		vsyscall = &vdso32_syscall_start;
+		vsyscall_len = &vdso32_syscall_end - &vdso32_syscall_start;
+	} else if (vdso32_sysenter()){
 		vsyscall = &vdso32_sysenter_start;
 		vsyscall_len = &vdso32_sysenter_end - &vdso32_sysenter_start;
+	} else {
+		vsyscall = &vdso32_int80_start;
+		vsyscall_len = &vdso32_int80_end - &vdso32_int80_start;
 	}
 
 	memcpy(syscall_page, vsyscall, vsyscall_len);
diff --git a/arch/x86/vdso/vdso32.S b/arch/x86/vdso/vdso32.S
index 1e36f72cab86..2ce5f82c333b 100644
--- a/arch/x86/vdso/vdso32.S
+++ b/arch/x86/vdso/vdso32.S
@@ -2,14 +2,17 @@
 
 __INITDATA
 
-	.globl vdso32_default_start, vdso32_default_end
-vdso32_default_start:
-#ifdef CONFIG_X86_32
+	.globl vdso32_int80_start, vdso32_int80_end
+vdso32_int80_start:
 	.incbin "arch/x86/vdso/vdso32-int80.so"
-#else
+vdso32_int80_end:
+
+	.globl vdso32_syscall_start, vdso32_syscall_end
+vdso32_syscall_start:
+#ifdef CONFIG_COMPAT
 	.incbin "arch/x86/vdso/vdso32-syscall.so"
 #endif
-vdso32_default_end:
+vdso32_syscall_end:
 
 	.globl vdso32_sysenter_start, vdso32_sysenter_end
 vdso32_sysenter_start:
diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/vdso/vgetcpu.c
index c8097f17f8a9..9fbc6b20026b 100644
--- a/arch/x86/vdso/vgetcpu.c
+++ b/arch/x86/vdso/vgetcpu.c
@@ -13,7 +13,8 @@
 #include <asm/vgtod.h>
 #include "vextern.h"
 
-long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused)
+notrace long
+__vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused)
 {
 	unsigned int p;
 
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index 3fdd51497a83..257ba4a10abf 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -16,12 +16,13 @@
 #include "vextern.h"		/* Just for VMAGIC.  */
 #undef VEXTERN
 
-int vdso_enabled = 1;
+unsigned int __read_mostly vdso_enabled = 1;
 
 extern char vdso_start[], vdso_end[];
 extern unsigned short vdso_sync_cpuid;
 
-struct page **vdso_pages;
+static struct page **vdso_pages;
+static unsigned vdso_size;
 
 static inline void *var_ref(void *p, char *name)
 {
@@ -38,6 +39,7 @@ static int __init init_vdso_vars(void)
 	int i;
 	char *vbase;
 
+	vdso_size = npages << PAGE_SHIFT;
 	vdso_pages = kmalloc(sizeof(struct page *) * npages, GFP_KERNEL);
 	if (!vdso_pages)
 		goto oom;
@@ -101,20 +103,19 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack)
 	struct mm_struct *mm = current->mm;
 	unsigned long addr;
 	int ret;
-	unsigned len = round_up(vdso_end - vdso_start, PAGE_SIZE);
 
 	if (!vdso_enabled)
 		return 0;
 
 	down_write(&mm->mmap_sem);
-	addr = vdso_addr(mm->start_stack, len);
-	addr = get_unmapped_area(NULL, addr, len, 0, 0);
+	addr = vdso_addr(mm->start_stack, vdso_size);
+	addr = get_unmapped_area(NULL, addr, vdso_size, 0, 0);
 	if (IS_ERR_VALUE(addr)) {
 		ret = addr;
 		goto up_fail;
 	}
 
-	ret = install_special_mapping(mm, addr, len,
+	ret = install_special_mapping(mm, addr, vdso_size,
 				      VM_READ|VM_EXEC|
 				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
 				      VM_ALWAYSDUMP,
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 6c388e593bc8..3815e425f470 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -6,9 +6,25 @@ config XEN
 	bool "Xen guest support"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	depends on X86_32
-	depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER)
+	depends on X86_64 || (X86_32 && X86_PAE && !(X86_VISWS || X86_VOYAGER))
+	depends on X86_CMPXCHG && X86_TSC
 	help
 	  This is the Linux Xen port.  Enabling this will allow the
 	  kernel to boot in a paravirtualized environment under the
 	  Xen hypervisor.
+
+config XEN_MAX_DOMAIN_MEMORY
+       int "Maximum allowed size of a domain in gigabytes"
+       default 8 if X86_32
+       default 32 if X86_64
+       depends on XEN
+       help
+         The pseudo-physical to machine address array is sized
+         according to the maximum possible memory size of a Xen
+         domain.  This array uses 1 page per gigabyte, so there's no
+         need to be too stingy here.
+
+config XEN_SAVE_RESTORE
+       bool
+       depends on PM
+       default y
\ No newline at end of file
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 3d8df981d5fd..59c1e539aed2 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -1,4 +1,4 @@
 obj-y		:= enlighten.o setup.o multicalls.o mmu.o \
-			time.o manage.o xen-asm.o grant-table.o
+			time.o xen-asm_$(BITS).o grant-table.o suspend.o
 
 obj-$(CONFIG_SMP)	+= smp.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index f09c1c69c37a..9ff6e3cbf08f 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -33,6 +33,7 @@
 #include <xen/interface/sched.h>
 #include <xen/features.h>
 #include <xen/page.h>
+#include <xen/hvc-console.h>
 
 #include <asm/paravirt.h>
 #include <asm/page.h>
@@ -40,6 +41,7 @@
 #include <asm/xen/hypervisor.h>
 #include <asm/fixmap.h>
 #include <asm/processor.h>
+#include <asm/msr-index.h>
 #include <asm/setup.h>
 #include <asm/desc.h>
 #include <asm/pgtable.h>
@@ -56,6 +58,18 @@ DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
 DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 
 /*
+ * Identity map, in addition to plain kernel map.  This needs to be
+ * large enough to allocate page table pages to allocate the rest.
+ * Each page can map 2MB.
+ */
+static pte_t level1_ident_pgt[PTRS_PER_PTE * 4] __page_aligned_bss;
+
+#ifdef CONFIG_X86_64
+/* l3 pud for userspace vsyscall mapping */
+static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
+#endif /* CONFIG_X86_64 */
+
+/*
  * Note about cr3 (pagetable base) values:
  *
  * xen_cr3 contains the current logical cr3 value; it contains the
@@ -75,13 +89,13 @@ DEFINE_PER_CPU(unsigned long, xen_current_cr3);	 /* actual vcpu cr3 */
 struct start_info *xen_start_info;
 EXPORT_SYMBOL_GPL(xen_start_info);
 
-static /* __initdata */ struct shared_info dummy_shared_info;
+struct shared_info xen_dummy_shared_info;
 
 /*
  * Point at some empty memory to start with. We map the real shared_info
  * page as soon as fixmap is up and running.
  */
-struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info;
+struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info;
 
 /*
  * Flag to determine whether vcpu info placement is available on all
@@ -98,13 +112,13 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info;
  */
 static int have_vcpu_info_placement = 1;
 
-static void __init xen_vcpu_setup(int cpu)
+static void xen_vcpu_setup(int cpu)
 {
 	struct vcpu_register_vcpu_info info;
 	int err;
 	struct vcpu_info *vcpup;
 
-	BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info);
+	BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
 	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
 
 	if (!have_vcpu_info_placement)
@@ -136,11 +150,45 @@ static void __init xen_vcpu_setup(int cpu)
 	}
 }
 
+/*
+ * On restore, set the vcpu placement up again.
+ * If it fails, then we're in a bad state, since
+ * we can't back out from using it...
+ */
+void xen_vcpu_restore(void)
+{
+	if (have_vcpu_info_placement) {
+		int cpu;
+
+		for_each_online_cpu(cpu) {
+			bool other_cpu = (cpu != smp_processor_id());
+
+			if (other_cpu &&
+			    HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL))
+				BUG();
+
+			xen_vcpu_setup(cpu);
+
+			if (other_cpu &&
+			    HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL))
+				BUG();
+		}
+
+		BUG_ON(!have_vcpu_info_placement);
+	}
+}
+
 static void __init xen_banner(void)
 {
+	unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL);
+	struct xen_extraversion extra;
+	HYPERVISOR_xen_version(XENVER_extraversion, &extra);
+
 	printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
 	       pv_info.name);
-	printk(KERN_INFO "Hypervisor signature: %s\n", xen_start_info->magic);
+	printk(KERN_INFO "Xen version: %d.%d%s%s\n",
+	       version >> 16, version & 0xffff, extra.extraversion,
+	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
 static void xen_cpuid(unsigned int *ax, unsigned int *bx,
@@ -235,13 +283,13 @@ static void xen_irq_enable(void)
 {
 	struct vcpu_info *vcpu;
 
-	/* There's a one instruction preempt window here.  We need to
-	   make sure we're don't switch CPUs between getting the vcpu
-	   pointer and updating the mask. */
-	preempt_disable();
+	/* We don't need to worry about being preempted here, since
+	   either a) interrupts are disabled, so no preemption, or b)
+	   the caller is confused and is trying to re-enable interrupts
+	   on an indeterminate processor. */
+
 	vcpu = x86_read_percpu(xen_vcpu);
 	vcpu->evtchn_upcall_mask = 0;
-	preempt_enable_no_resched();
 
 	/* Doesn't matter if we get preempted here, because any
 	   pending event will get dealt with anyway. */
@@ -254,7 +302,7 @@ static void xen_irq_enable(void)
 static void xen_safe_halt(void)
 {
 	/* Blocking includes an implicit local_irq_enable(). */
-	if (HYPERVISOR_sched_op(SCHEDOP_block, 0) != 0)
+	if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0)
 		BUG();
 }
 
@@ -332,14 +380,6 @@ static void load_TLS_descriptor(struct thread_struct *t,
 
 static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 {
-	xen_mc_batch();
-
-	load_TLS_descriptor(t, cpu, 0);
-	load_TLS_descriptor(t, cpu, 1);
-	load_TLS_descriptor(t, cpu, 2);
-
-	xen_mc_issue(PARAVIRT_LAZY_CPU);
-
 	/*
 	 * XXX sleazy hack: If we're being called in a lazy-cpu zone,
 	 * it means we're in a context switch, and %gs has just been
@@ -348,10 +388,39 @@ static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 	 * Either way, it has been saved, and the new value will get
 	 * loaded properly.  This will go away as soon as Xen has been
 	 * modified to not save/restore %gs for normal hypercalls.
+	 *
+	 * On x86_64, this hack is not used for %gs, because gs points
+	 * to KERNEL_GS_BASE (and uses it for PDA references), so we
+	 * must not zero %gs on x86_64
+	 *
+	 * For x86_64, we need to zero %fs, otherwise we may get an
+	 * exception between the new %fs descriptor being loaded and
+	 * %fs being effectively cleared at __switch_to().
 	 */
-	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)
+	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
+#ifdef CONFIG_X86_32
 		loadsegment(gs, 0);
+#else
+		loadsegment(fs, 0);
+#endif
+	}
+
+	xen_mc_batch();
+
+	load_TLS_descriptor(t, cpu, 0);
+	load_TLS_descriptor(t, cpu, 1);
+	load_TLS_descriptor(t, cpu, 2);
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+}
+
+#ifdef CONFIG_X86_64
+static void xen_load_gs_index(unsigned int idx)
+{
+	if (HYPERVISOR_set_segment_base(SEGBASE_GS_USER_SEL, idx))
+		BUG();
 }
+#endif
 
 static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 				const void *ptr)
@@ -369,23 +438,18 @@ static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 	preempt_enable();
 }
 
-static int cvt_gate_to_trap(int vector, u32 low, u32 high,
+static int cvt_gate_to_trap(int vector, const gate_desc *val,
 			    struct trap_info *info)
 {
-	u8 type, dpl;
-
-	type = (high >> 8) & 0x1f;
-	dpl = (high >> 13) & 3;
-
-	if (type != 0xf && type != 0xe)
+	if (val->type != 0xf && val->type != 0xe)
 		return 0;
 
 	info->vector = vector;
-	info->address = (high & 0xffff0000) | (low & 0x0000ffff);
-	info->cs = low >> 16;
-	info->flags = dpl;
+	info->address = gate_offset(*val);
+	info->cs = gate_segment(*val);
+	info->flags = val->dpl;
 	/* interrupt gates clear IF */
-	if (type == 0xe)
+	if (val->type == 0xe)
 		info->flags |= 4;
 
 	return 1;
@@ -412,11 +476,10 @@ static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g)
 
 	if (p >= start && (p + 8) <= end) {
 		struct trap_info info[2];
-		u32 *desc = (u32 *)g;
 
 		info[1].address = 0;
 
-		if (cvt_gate_to_trap(entrynum, desc[0], desc[1], &info[0]))
+		if (cvt_gate_to_trap(entrynum, g, &info[0]))
 			if (HYPERVISOR_set_trap_table(info))
 				BUG();
 	}
@@ -429,13 +492,13 @@ static void xen_convert_trap_info(const struct desc_ptr *desc,
 {
 	unsigned in, out, count;
 
-	count = (desc->size+1) / 8;
+	count = (desc->size+1) / sizeof(gate_desc);
 	BUG_ON(count > 256);
 
 	for (in = out = 0; in < count; in++) {
-		const u32 *entry = (u32 *)(desc->address + in * 8);
+		gate_desc *entry = (gate_desc*)(desc->address) + in;
 
-		if (cvt_gate_to_trap(in, entry[0], entry[1], &traps[out]))
+		if (cvt_gate_to_trap(in, entry, &traps[out]))
 			out++;
 	}
 	traps[out].address = 0;
@@ -607,6 +670,30 @@ static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm,
 	xen_mc_issue(PARAVIRT_LAZY_MMU);
 }
 
+static void xen_clts(void)
+{
+	struct multicall_space mcs;
+
+	mcs = xen_mc_entry(0);
+
+	MULTI_fpu_taskswitch(mcs.mc, 0);
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+}
+
+static void xen_write_cr0(unsigned long cr0)
+{
+	struct multicall_space mcs;
+
+	/* Only pay attention to cr0.TS; everything else is
+	   ignored. */
+	mcs = xen_mc_entry(0);
+
+	MULTI_fpu_taskswitch(mcs.mc, (cr0 & X86_CR0_TS) != 0);
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+}
+
 static void xen_write_cr2(unsigned long cr2)
 {
 	x86_read_percpu(xen_vcpu)->arch.cr2 = cr2;
@@ -624,8 +711,10 @@ static unsigned long xen_read_cr2_direct(void)
 
 static void xen_write_cr4(unsigned long cr4)
 {
-	/* Just ignore cr4 changes; Xen doesn't allow us to do
-	   anything anyway. */
+	cr4 &= ~X86_CR4_PGE;
+	cr4 &= ~X86_CR4_PSE;
+
+	native_write_cr4(cr4);
 }
 
 static unsigned long xen_read_cr3(void)
@@ -638,33 +727,89 @@ static void set_current_cr3(void *v)
 	x86_write_percpu(xen_current_cr3, (unsigned long)v);
 }
 
-static void xen_write_cr3(unsigned long cr3)
+static void __xen_write_cr3(bool kernel, unsigned long cr3)
 {
 	struct mmuext_op *op;
 	struct multicall_space mcs;
-	unsigned long mfn = pfn_to_mfn(PFN_DOWN(cr3));
+	unsigned long mfn;
 
-	BUG_ON(preemptible());
+	if (cr3)
+		mfn = pfn_to_mfn(PFN_DOWN(cr3));
+	else
+		mfn = 0;
 
-	mcs = xen_mc_entry(sizeof(*op));  /* disables interrupts */
+	WARN_ON(mfn == 0 && kernel);
 
-	/* Update while interrupts are disabled, so its atomic with
-	   respect to ipis */
-	x86_write_percpu(xen_cr3, cr3);
+	mcs = __xen_mc_entry(sizeof(*op));
 
 	op = mcs.args;
-	op->cmd = MMUEXT_NEW_BASEPTR;
+	op->cmd = kernel ? MMUEXT_NEW_BASEPTR : MMUEXT_NEW_USER_BASEPTR;
 	op->arg1.mfn = mfn;
 
 	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
 
-	/* Update xen_update_cr3 once the batch has actually
-	   been submitted. */
-	xen_mc_callback(set_current_cr3, (void *)cr3);
+	if (kernel) {
+		x86_write_percpu(xen_cr3, cr3);
+
+		/* Update xen_current_cr3 once the batch has actually
+		   been submitted. */
+		xen_mc_callback(set_current_cr3, (void *)cr3);
+	}
+}
+
+static void xen_write_cr3(unsigned long cr3)
+{
+	BUG_ON(preemptible());
+
+	xen_mc_batch();  /* disables interrupts */
+
+	/* Update while interrupts are disabled, so its atomic with
+	   respect to ipis */
+	x86_write_percpu(xen_cr3, cr3);
+
+	__xen_write_cr3(true, cr3);
+
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
+		if (user_pgd)
+			__xen_write_cr3(false, __pa(user_pgd));
+		else
+			__xen_write_cr3(false, 0);
+	}
+#endif
 
 	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
 }
 
+static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
+{
+	int ret;
+
+	ret = 0;
+
+	switch(msr) {
+#ifdef CONFIG_X86_64
+		unsigned which;
+		u64 base;
+
+	case MSR_FS_BASE:		which = SEGBASE_FS; goto set;
+	case MSR_KERNEL_GS_BASE:	which = SEGBASE_GS_USER; goto set;
+	case MSR_GS_BASE:		which = SEGBASE_GS_KERNEL; goto set;
+
+	set:
+		base = ((u64)high << 32) | low;
+		if (HYPERVISOR_set_segment_base(which, base) != 0)
+			ret = -EFAULT;
+		break;
+#endif
+	default:
+		ret = native_write_msr_safe(msr, low, high);
+	}
+
+	return ret;
+}
+
 /* Early in boot, while setting up the initial pagetable, assume
    everything is pinned. */
 static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn)
@@ -721,6 +866,48 @@ static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn)
 	xen_alloc_ptpage(mm, pfn, PT_PMD);
 }
 
+static int xen_pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = mm->pgd;
+	int ret = 0;
+
+	BUG_ON(PagePinned(virt_to_page(pgd)));
+
+#ifdef CONFIG_X86_64
+	{
+		struct page *page = virt_to_page(pgd);
+		pgd_t *user_pgd;
+
+		BUG_ON(page->private != 0);
+
+		ret = -ENOMEM;
+
+		user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+		page->private = (unsigned long)user_pgd;
+
+		if (user_pgd != NULL) {
+			user_pgd[pgd_index(VSYSCALL_START)] =
+				__pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
+			ret = 0;
+		}
+
+		BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
+	}
+#endif
+
+	return ret;
+}
+
+static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+#ifdef CONFIG_X86_64
+	pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+	if (user_pgd)
+		free_page((unsigned long)user_pgd);
+#endif
+}
+
 /* This should never happen until we're OK to use struct page */
 static void xen_release_ptpage(u32 pfn, unsigned level)
 {
@@ -746,6 +933,18 @@ static void xen_release_pmd(u32 pfn)
 	xen_release_ptpage(pfn, PT_PMD);
 }
 
+#if PAGETABLE_LEVELS == 4
+static void xen_alloc_pud(struct mm_struct *mm, u32 pfn)
+{
+	xen_alloc_ptpage(mm, pfn, PT_PUD);
+}
+
+static void xen_release_pud(u32 pfn)
+{
+	xen_release_ptpage(pfn, PT_PUD);
+}
+#endif
+
 #ifdef CONFIG_HIGHPTE
 static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
 {
@@ -784,68 +983,16 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
 
 static __init void xen_pagetable_setup_start(pgd_t *base)
 {
-	pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base;
-	int i;
-
-	/* special set_pte for pagetable initialization */
-	pv_mmu_ops.set_pte = xen_set_pte_init;
-
-	init_mm.pgd = base;
-	/*
-	 * copy top-level of Xen-supplied pagetable into place.  This
-	 * is a stand-in while we copy the pmd pages.
-	 */
-	memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
-	/*
-	 * For PAE, need to allocate new pmds, rather than
-	 * share Xen's, since Xen doesn't like pmd's being
-	 * shared between address spaces.
-	 */
-	for (i = 0; i < PTRS_PER_PGD; i++) {
-		if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
-			pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
-
-			memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
-			       PAGE_SIZE);
-
-			make_lowmem_page_readonly(pmd);
-
-			set_pgd(&base[i], __pgd(1 + __pa(pmd)));
-		} else
-			pgd_clear(&base[i]);
-	}
-
-	/* make sure zero_page is mapped RO so we can use it in pagetables */
-	make_lowmem_page_readonly(empty_zero_page);
-	make_lowmem_page_readonly(base);
-	/*
-	 * Switch to new pagetable.  This is done before
-	 * pagetable_init has done anything so that the new pages
-	 * added to the table can be prepared properly for Xen.
-	 */
-	xen_write_cr3(__pa(base));
-
-	/* Unpin initial Xen pagetable */
-	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
-			  PFN_DOWN(__pa(xen_start_info->pt_base)));
 }
 
-static __init void setup_shared_info(void)
+void xen_setup_shared_info(void)
 {
 	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
-		unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
-		/*
-		 * Create a mapping for the shared info page.
-		 * Should be set_fixmap(), but shared_info is a machine
-		 * address with no corresponding pseudo-phys address.
-		 */
-		set_pte_mfn(addr,
-			    PFN_DOWN(xen_start_info->shared_info),
-			    PAGE_KERNEL);
-
-		HYPERVISOR_shared_info = (struct shared_info *)addr;
+		set_fixmap(FIX_PARAVIRT_BOOTMAP,
+			   xen_start_info->shared_info);
+
+		HYPERVISOR_shared_info =
+			(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
 	} else
 		HYPERVISOR_shared_info =
 			(struct shared_info *)__va(xen_start_info->shared_info);
@@ -854,27 +1001,43 @@ static __init void setup_shared_info(void)
 	/* In UP this is as good a place as any to set up shared info */
 	xen_setup_vcpu_info_placement();
 #endif
+
+	xen_setup_mfn_list_list();
 }
 
 static __init void xen_pagetable_setup_done(pgd_t *base)
 {
+	xen_setup_shared_info();
+}
+
+static __init void xen_post_allocator_init(void)
+{
+	pv_mmu_ops.set_pte = xen_set_pte;
+	pv_mmu_ops.set_pmd = xen_set_pmd;
+	pv_mmu_ops.set_pud = xen_set_pud;
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.set_pgd = xen_set_pgd;
+#endif
+
 	/* This will work as long as patching hasn't happened yet
 	   (which it hasn't) */
 	pv_mmu_ops.alloc_pte = xen_alloc_pte;
 	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
 	pv_mmu_ops.release_pte = xen_release_pte;
 	pv_mmu_ops.release_pmd = xen_release_pmd;
-	pv_mmu_ops.set_pte = xen_set_pte;
-
-	setup_shared_info();
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.alloc_pud = xen_alloc_pud;
+	pv_mmu_ops.release_pud = xen_release_pud;
+#endif
 
-	/* Actually pin the pagetable down, but we can't set PG_pinned
-	   yet because the page structures don't exist yet. */
-	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base)));
+#ifdef CONFIG_X86_64
+	SetPagePinned(virt_to_page(level3_user_vsyscall));
+#endif
+	xen_mark_init_mm_pinned();
 }
 
 /* This is called once we have the cpu_possible_map */
-void __init xen_setup_vcpu_info_placement(void)
+void xen_setup_vcpu_info_placement(void)
 {
 	int cpu;
 
@@ -883,6 +1046,7 @@ void __init xen_setup_vcpu_info_placement(void)
 
 	/* xen_vcpu_setup managed to place the vcpu_info within the
 	   percpu area for all cpus, so make use of it */
+#ifdef CONFIG_X86_32
 	if (have_vcpu_info_placement) {
 		printk(KERN_INFO "Xen: using vcpu_info placement\n");
 
@@ -892,6 +1056,7 @@ void __init xen_setup_vcpu_info_placement(void)
 		pv_irq_ops.irq_enable = xen_irq_enable_direct;
 		pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
 	}
+#endif
 }
 
 static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
@@ -912,10 +1077,12 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
 	goto patch_site
 
 	switch (type) {
+#ifdef CONFIG_X86_32
 		SITE(pv_irq_ops, irq_enable);
 		SITE(pv_irq_ops, irq_disable);
 		SITE(pv_irq_ops, save_fl);
 		SITE(pv_irq_ops, restore_fl);
+#endif /* CONFIG_X86_32 */
 #undef SITE
 
 	patch_site:
@@ -947,6 +1114,49 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
 	return ret;
 }
 
+static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
+{
+	pte_t pte;
+
+	phys >>= PAGE_SHIFT;
+
+	switch (idx) {
+	case FIX_BTMAP_END ... FIX_BTMAP_BEGIN:
+#ifdef CONFIG_X86_F00F_BUG
+	case FIX_F00F_IDT:
+#endif
+#ifdef CONFIG_X86_32
+	case FIX_WP_TEST:
+	case FIX_VDSO:
+# ifdef CONFIG_HIGHMEM
+	case FIX_KMAP_BEGIN ... FIX_KMAP_END:
+# endif
+#else
+	case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE:
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+	case FIX_APIC_BASE:	/* maps dummy local APIC */
+#endif
+		pte = pfn_pte(phys, prot);
+		break;
+
+	default:
+		pte = mfn_pte(phys, prot);
+		break;
+	}
+
+	__native_set_fixmap(idx, pte);
+
+#ifdef CONFIG_X86_64
+	/* Replicate changes to map the vsyscall page into the user
+	   pagetable vsyscall mapping. */
+	if (idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) {
+		unsigned long vaddr = __fix_to_virt(idx);
+		set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte);
+	}
+#endif
+}
+
 static const struct pv_info xen_info __initdata = {
 	.paravirt_enabled = 1,
 	.shared_kernel_pmd = 0,
@@ -960,7 +1170,7 @@ static const struct pv_init_ops xen_init_ops __initdata = {
 	.banner = xen_banner,
 	.memory_setup = xen_memory_setup,
 	.arch_setup = xen_arch_setup,
-	.post_allocator_init = xen_mark_init_mm_pinned,
+	.post_allocator_init = xen_post_allocator_init,
 };
 
 static const struct pv_time_ops xen_time_ops __initdata = {
@@ -968,7 +1178,7 @@ static const struct pv_time_ops xen_time_ops __initdata = {
 
 	.set_wallclock = xen_set_wallclock,
 	.get_wallclock = xen_get_wallclock,
-	.get_cpu_khz = xen_cpu_khz,
+	.get_tsc_khz = xen_tsc_khz,
 	.sched_clock = xen_sched_clock,
 };
 
@@ -978,10 +1188,10 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.set_debugreg = xen_set_debugreg,
 	.get_debugreg = xen_get_debugreg,
 
-	.clts = native_clts,
+	.clts = xen_clts,
 
 	.read_cr0 = native_read_cr0,
-	.write_cr0 = native_write_cr0,
+	.write_cr0 = xen_write_cr0,
 
 	.read_cr4 = native_read_cr4,
 	.read_cr4_safe = native_read_cr4_safe,
@@ -990,18 +1200,25 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.wbinvd = native_wbinvd,
 
 	.read_msr = native_read_msr_safe,
-	.write_msr = native_write_msr_safe,
+	.write_msr = xen_write_msr_safe,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
 
 	.iret = xen_iret,
-	.irq_enable_syscall_ret = xen_sysexit,
+	.irq_enable_sysexit = xen_sysexit,
+#ifdef CONFIG_X86_64
+	.usergs_sysret32 = xen_sysret32,
+	.usergs_sysret64 = xen_sysret64,
+#endif
 
 	.load_tr_desc = paravirt_nop,
 	.set_ldt = xen_set_ldt,
 	.load_gdt = xen_load_gdt,
 	.load_idt = xen_load_idt,
 	.load_tls = xen_load_tls,
+#ifdef CONFIG_X86_64
+	.load_gs_index = xen_load_gs_index,
+#endif
 
 	.store_gdt = native_store_gdt,
 	.store_idt = native_store_idt,
@@ -1015,26 +1232,48 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.set_iopl_mask = xen_set_iopl_mask,
 	.io_delay = xen_io_delay,
 
+	/* Xen takes care of %gs when switching to usermode for us */
+	.swapgs = paravirt_nop,
+
 	.lazy_mode = {
 		.enter = paravirt_enter_lazy_cpu,
 		.leave = xen_leave_lazy,
 	},
 };
 
+static void __init __xen_init_IRQ(void)
+{
+#ifdef CONFIG_X86_64
+	int i;
+
+	/* Create identity vector->irq map */
+	for(i = 0; i < NR_VECTORS; i++) {
+		int cpu;
+
+		for_each_possible_cpu(cpu)
+			per_cpu(vector_irq, cpu)[i] = i;
+	}
+#endif	/* CONFIG_X86_64 */
+
+	xen_init_IRQ();
+}
+
 static const struct pv_irq_ops xen_irq_ops __initdata = {
-	.init_IRQ = xen_init_IRQ,
+	.init_IRQ = __xen_init_IRQ,
 	.save_fl = xen_save_fl,
 	.restore_fl = xen_restore_fl,
 	.irq_disable = xen_irq_disable,
 	.irq_enable = xen_irq_enable,
 	.safe_halt = xen_safe_halt,
 	.halt = xen_halt,
+#ifdef CONFIG_X86_64
+	.adjust_exception_frame = xen_adjust_exception_frame,
+#endif
 };
 
 static const struct pv_apic_ops xen_apic_ops __initdata = {
 #ifdef CONFIG_X86_LOCAL_APIC
 	.apic_write = xen_apic_write,
-	.apic_write_atomic = xen_apic_write,
 	.apic_read = xen_apic_read,
 	.setup_boot_clock = paravirt_nop,
 	.setup_secondary_clock = paravirt_nop,
@@ -1060,6 +1299,9 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.pte_update = paravirt_nop,
 	.pte_update_defer = paravirt_nop,
 
+	.pgd_alloc = xen_pgd_alloc,
+	.pgd_free = xen_pgd_free,
+
 	.alloc_pte = xen_alloc_pte_init,
 	.release_pte = xen_release_pte_init,
 	.alloc_pmd = xen_alloc_pte_init,
@@ -1070,25 +1312,44 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.kmap_atomic_pte = xen_kmap_atomic_pte,
 #endif
 
-	.set_pte = NULL,	/* see xen_pagetable_setup_* */
+#ifdef CONFIG_X86_64
+	.set_pte = xen_set_pte,
+#else
+	.set_pte = xen_set_pte_init,
+#endif
 	.set_pte_at = xen_set_pte_at,
-	.set_pmd = xen_set_pmd,
+	.set_pmd = xen_set_pmd_hyper,
+
+	.ptep_modify_prot_start = __ptep_modify_prot_start,
+	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
 
 	.pte_val = xen_pte_val,
+	.pte_flags = native_pte_val,
 	.pgd_val = xen_pgd_val,
 
 	.make_pte = xen_make_pte,
 	.make_pgd = xen_make_pgd,
 
+#ifdef CONFIG_X86_PAE
 	.set_pte_atomic = xen_set_pte_atomic,
 	.set_pte_present = xen_set_pte_at,
-	.set_pud = xen_set_pud,
 	.pte_clear = xen_pte_clear,
 	.pmd_clear = xen_pmd_clear,
+#endif	/* CONFIG_X86_PAE */
+	.set_pud = xen_set_pud_hyper,
 
 	.make_pmd = xen_make_pmd,
 	.pmd_val = xen_pmd_val,
 
+#if PAGETABLE_LEVELS == 4
+	.pud_val = xen_pud_val,
+	.make_pud = xen_make_pud,
+	.set_pgd = xen_set_pgd_hyper,
+
+	.alloc_pud = xen_alloc_pte_init,
+	.release_pud = xen_release_pte_init,
+#endif	/* PAGETABLE_LEVELS == 4 */
+
 	.activate_mm = xen_activate_mm,
 	.dup_mmap = xen_dup_mmap,
 	.exit_mmap = xen_exit_mmap,
@@ -1097,28 +1358,19 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 		.enter = paravirt_enter_lazy_mmu,
 		.leave = xen_leave_lazy,
 	},
-};
 
-#ifdef CONFIG_SMP
-static const struct smp_ops xen_smp_ops __initdata = {
-	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
-	.smp_prepare_cpus = xen_smp_prepare_cpus,
-	.cpu_up = xen_cpu_up,
-	.smp_cpus_done = xen_smp_cpus_done,
-
-	.smp_send_stop = xen_smp_send_stop,
-	.smp_send_reschedule = xen_smp_send_reschedule,
-	.smp_call_function_mask = xen_smp_call_function_mask,
+	.set_fixmap = xen_set_fixmap,
 };
-#endif	/* CONFIG_SMP */
 
 static void xen_reboot(int reason)
 {
+	struct sched_shutdown r = { .reason = reason };
+
 #ifdef CONFIG_SMP
 	smp_send_stop();
 #endif
 
-	if (HYPERVISOR_sched_op(SCHEDOP_shutdown, reason))
+	if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r))
 		BUG();
 }
 
@@ -1154,6 +1406,7 @@ static const struct machine_ops __initdata xen_machine_ops = {
 
 static void __init xen_reserve_top(void)
 {
+#ifdef CONFIG_X86_32
 	unsigned long top = HYPERVISOR_VIRT_START;
 	struct xen_platform_parameters pp;
 
@@ -1161,8 +1414,248 @@ static void __init xen_reserve_top(void)
 		top = pp.virt_start;
 
 	reserve_top_address(-top + 2 * PAGE_SIZE);
+#endif	/* CONFIG_X86_32 */
+}
+
+/*
+ * Like __va(), but returns address in the kernel mapping (which is
+ * all we have until the physical memory mapping has been set up.
+ */
+static void *__ka(phys_addr_t paddr)
+{
+#ifdef CONFIG_X86_64
+	return (void *)(paddr + __START_KERNEL_map);
+#else
+	return __va(paddr);
+#endif
+}
+
+/* Convert a machine address to physical address */
+static unsigned long m2p(phys_addr_t maddr)
+{
+	phys_addr_t paddr;
+
+	maddr &= PTE_PFN_MASK;
+	paddr = mfn_to_pfn(maddr >> PAGE_SHIFT) << PAGE_SHIFT;
+
+	return paddr;
 }
 
+/* Convert a machine address to kernel virtual */
+static void *m2v(phys_addr_t maddr)
+{
+	return __ka(m2p(maddr));
+}
+
+#ifdef CONFIG_X86_64
+static void walk(pgd_t *pgd, unsigned long addr)
+{
+	unsigned l4idx = pgd_index(addr);
+	unsigned l3idx = pud_index(addr);
+	unsigned l2idx = pmd_index(addr);
+	unsigned l1idx = pte_index(addr);
+	pgd_t l4;
+	pud_t l3;
+	pmd_t l2;
+	pte_t l1;
+
+	xen_raw_printk("walk %p, %lx -> %d %d %d %d\n",
+		       pgd, addr, l4idx, l3idx, l2idx, l1idx);
+
+	l4 = pgd[l4idx];
+	xen_raw_printk("  l4: %016lx\n", l4.pgd);
+	xen_raw_printk("      %016lx\n", pgd_val(l4));
+
+	l3 = ((pud_t *)(m2v(l4.pgd)))[l3idx];
+	xen_raw_printk("  l3: %016lx\n", l3.pud);
+	xen_raw_printk("      %016lx\n", pud_val(l3));
+
+	l2 = ((pmd_t *)(m2v(l3.pud)))[l2idx];
+	xen_raw_printk("  l2: %016lx\n", l2.pmd);
+	xen_raw_printk("      %016lx\n", pmd_val(l2));
+
+	l1 = ((pte_t *)(m2v(l2.pmd)))[l1idx];
+	xen_raw_printk("  l1: %016lx\n", l1.pte);
+	xen_raw_printk("      %016lx\n", pte_val(l1));
+}
+#endif
+
+static void set_page_prot(void *addr, pgprot_t prot)
+{
+	unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
+	pte_t pte = pfn_pte(pfn, prot);
+
+	xen_raw_printk("addr=%p pfn=%lx mfn=%lx prot=%016llx pte=%016llx\n",
+		       addr, pfn, get_phys_to_machine(pfn),
+		       pgprot_val(prot), pte.pte);
+
+	if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
+		BUG();
+}
+
+static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
+{
+	unsigned pmdidx, pteidx;
+	unsigned ident_pte;
+	unsigned long pfn;
+
+	ident_pte = 0;
+	pfn = 0;
+	for(pmdidx = 0; pmdidx < PTRS_PER_PMD && pfn < max_pfn; pmdidx++) {
+		pte_t *pte_page;
+
+		/* Reuse or allocate a page of ptes */
+		if (pmd_present(pmd[pmdidx]))
+			pte_page = m2v(pmd[pmdidx].pmd);
+		else {
+			/* Check for free pte pages */
+			if (ident_pte == ARRAY_SIZE(level1_ident_pgt))
+				break;
+
+			pte_page = &level1_ident_pgt[ident_pte];
+			ident_pte += PTRS_PER_PTE;
+
+			pmd[pmdidx] = __pmd(__pa(pte_page) | _PAGE_TABLE);
+		}
+
+		/* Install mappings */
+		for(pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
+			pte_t pte;
+
+			if (pfn > max_pfn_mapped)
+				max_pfn_mapped = pfn;
+
+			if (!pte_none(pte_page[pteidx]))
+				continue;
+
+			pte = pfn_pte(pfn, PAGE_KERNEL_EXEC);
+			pte_page[pteidx] = pte;
+		}
+	}
+
+	for(pteidx = 0; pteidx < ident_pte; pteidx += PTRS_PER_PTE)
+		set_page_prot(&level1_ident_pgt[pteidx], PAGE_KERNEL_RO);
+
+	set_page_prot(pmd, PAGE_KERNEL_RO);
+}
+
+#ifdef CONFIG_X86_64
+static void convert_pfn_mfn(void *v)
+{
+	pte_t *pte = v;
+	int i;
+
+	/* All levels are converted the same way, so just treat them
+	   as ptes. */
+	for(i = 0; i < PTRS_PER_PTE; i++)
+		pte[i] = xen_make_pte(pte[i].pte);
+}
+
+/*
+ * Set up the inital kernel pagetable.
+ *
+ * We can construct this by grafting the Xen provided pagetable into
+ * head_64.S's preconstructed pagetables.  We copy the Xen L2's into
+ * level2_ident_pgt, level2_kernel_pgt and level2_fixmap_pgt.  This
+ * means that only the kernel has a physical mapping to start with -
+ * but that's enough to get __va working.  We need to fill in the rest
+ * of the physical mapping once some sort of allocator has been set
+ * up.
+ */
+static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
+{
+	pud_t *l3;
+	pmd_t *l2;
+
+	/* Zap identity mapping */
+	init_level4_pgt[0] = __pgd(0);
+
+	/* Pre-constructed entries are in pfn, so convert to mfn */
+	convert_pfn_mfn(init_level4_pgt);
+	convert_pfn_mfn(level3_ident_pgt);
+	convert_pfn_mfn(level3_kernel_pgt);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
+
+	memcpy(level2_ident_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+	memcpy(level2_kernel_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map + PMD_SIZE)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map + PMD_SIZE)].pud);
+	memcpy(level2_fixmap_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	/* Set up identity map */
+	xen_map_identity_early(level2_ident_pgt, max_pfn);
+
+	/* Make pagetable pieces RO */
+	set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
+
+	/* Pin down new L4 */
+	pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
+			  PFN_DOWN(__pa_symbol(init_level4_pgt)));
+
+	/* Unpin Xen-provided one */
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	/* Switch over */
+	pgd = init_level4_pgt;
+
+	/*
+	 * At this stage there can be no user pgd, and no page
+	 * structure to attach it to, so make sure we just set kernel
+	 * pgd.
+	 */
+	xen_mc_batch();
+	__xen_write_cr3(true, __pa(pgd));
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+
+	reserve_early(__pa(xen_start_info->pt_base),
+		      __pa(xen_start_info->pt_base +
+			   xen_start_info->nr_pt_frames * PAGE_SIZE),
+		      "XEN PAGETABLES");
+
+	return pgd;
+}
+#else	/* !CONFIG_X86_64 */
+static pmd_t level2_kernel_pgt[PTRS_PER_PMD] __page_aligned_bss;
+
+static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
+{
+	pmd_t *kernel_pmd;
+
+	init_pg_tables_start = __pa(pgd);
+	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
+	max_pfn_mapped = PFN_DOWN(init_pg_tables_end + 512*1024);
+
+	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
+	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	xen_map_identity_early(level2_kernel_pgt, max_pfn);
+
+	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
+			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
+
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	xen_write_cr3(__pa(swapper_pg_dir));
+
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+
+	return swapper_pg_dir;
+}
+#endif	/* CONFIG_X86_64 */
+
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
@@ -1173,6 +1666,8 @@ asmlinkage void __init xen_start_kernel(void)
 
 	BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
 
+	xen_setup_features();
+
 	/* Install Xen paravirt ops */
 	pv_info = xen_info;
 	pv_init_ops = xen_init_ops;
@@ -1182,59 +1677,85 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
 
+	if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
+		pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
+		pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
+	}
+
 	machine_ops = xen_machine_ops;
 
-#ifdef CONFIG_SMP
-	smp_ops = xen_smp_ops;
+#ifdef CONFIG_X86_64
+	/* Disable until direct per-cpu data access. */
+	have_vcpu_info_placement = 0;
+	x86_64_init_pda();
 #endif
 
-	xen_setup_features();
+	xen_smp_init();
 
 	/* Get mfn list */
 	if (!xen_feature(XENFEAT_auto_translated_physmap))
-		phys_to_machine_mapping = (unsigned long *)xen_start_info->mfn_list;
+		xen_build_dynamic_phys_to_machine();
 
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
-
-	init_mm.pgd = pgd; /* use the Xen pagetables to start */
-
-	/* keep using Xen gdt for now; no urgent need to change it */
-
-	x86_write_percpu(xen_cr3, __pa(pgd));
-	x86_write_percpu(xen_current_cr3, __pa(pgd));
+	/* Prevent unwanted bits from being set in PTEs. */
+	__supported_pte_mask &= ~_PAGE_GLOBAL;
+	if (!is_initial_xendomain())
+		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
 
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
 
+	xen_raw_console_write("mapping kernel into physical memory\n");
+	pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
+
+	init_mm.pgd = pgd;
+
+	/* keep using Xen gdt for now; no urgent need to change it */
+
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))
 		pv_info.kernel_rpl = 0;
 
-	/* Prevent unwanted bits from being set in PTEs. */
-	__supported_pte_mask &= ~_PAGE_GLOBAL;
-	if (!is_initial_xendomain())
-		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
 	/* set the limit of our address space */
 	xen_reserve_top();
 
+#ifdef CONFIG_X86_32
 	/* set up basic CPUID stuff */
 	cpu_detect(&new_cpu_data);
 	new_cpu_data.hard_math = 1;
 	new_cpu_data.x86_capability[0] = cpuid_edx(1);
+#endif
 
 	/* Poke various useful things into boot_params */
 	boot_params.hdr.type_of_loader = (9 << 4) | 0;
 	boot_params.hdr.ramdisk_image = xen_start_info->mod_start
 		? __pa(xen_start_info->mod_start) : 0;
 	boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
+	boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
 
-	if (!is_initial_xendomain())
+	if (!is_initial_xendomain()) {
+		add_preferred_console("xenboot", 0, NULL);
+		add_preferred_console("tty", 0, NULL);
 		add_preferred_console("hvc", 0, NULL);
+	}
+
+	xen_raw_console_write("about to get started...\n");
+
+#if 0
+	xen_raw_printk("&boot_params=%p __pa(&boot_params)=%lx __va(__pa(&boot_params))=%lx\n",
+		       &boot_params, __pa_symbol(&boot_params),
+		       __va(__pa_symbol(&boot_params)));
+
+	walk(pgd, &boot_params);
+	walk(pgd, __va(__pa(&boot_params)));
+#endif
 
 	/* Start the world */
-	start_kernel();
+#ifdef CONFIG_X86_32
+	i386_start_kernel();
+#else
+	x86_64_start_reservations((char *)__pa_symbol(&boot_params));
+#endif
 }
diff --git a/arch/x86/xen/manage.c b/arch/x86/xen/manage.c
deleted file mode 100644
index aa7af9e6abc0..000000000000
--- a/arch/x86/xen/manage.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Handle extern requests for shutdown, reboot and sysrq
- */
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/reboot.h>
-#include <linux/sysrq.h>
-
-#include <xen/xenbus.h>
-
-#define SHUTDOWN_INVALID  -1
-#define SHUTDOWN_POWEROFF  0
-#define SHUTDOWN_SUSPEND   2
-/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only
- * report a crash, not be instructed to crash!
- * HALT is the same as POWEROFF, as far as we're concerned.  The tools use
- * the distinction when we return the reason code to them.
- */
-#define SHUTDOWN_HALT      4
-
-/* Ignore multiple shutdown requests. */
-static int shutting_down = SHUTDOWN_INVALID;
-
-static void shutdown_handler(struct xenbus_watch *watch,
-			     const char **vec, unsigned int len)
-{
-	char *str;
-	struct xenbus_transaction xbt;
-	int err;
-
-	if (shutting_down != SHUTDOWN_INVALID)
-		return;
-
- again:
-	err = xenbus_transaction_start(&xbt);
-	if (err)
-		return;
-
-	str = (char *)xenbus_read(xbt, "control", "shutdown", NULL);
-	/* Ignore read errors and empty reads. */
-	if (XENBUS_IS_ERR_READ(str)) {
-		xenbus_transaction_end(xbt, 1);
-		return;
-	}
-
-	xenbus_write(xbt, "control", "shutdown", "");
-
-	err = xenbus_transaction_end(xbt, 0);
-	if (err == -EAGAIN) {
-		kfree(str);
-		goto again;
-	}
-
-	if (strcmp(str, "poweroff") == 0 ||
-	    strcmp(str, "halt") == 0)
-		orderly_poweroff(false);
-	else if (strcmp(str, "reboot") == 0)
-		ctrl_alt_del();
-	else {
-		printk(KERN_INFO "Ignoring shutdown request: %s\n", str);
-		shutting_down = SHUTDOWN_INVALID;
-	}
-
-	kfree(str);
-}
-
-static void sysrq_handler(struct xenbus_watch *watch, const char **vec,
-			  unsigned int len)
-{
-	char sysrq_key = '\0';
-	struct xenbus_transaction xbt;
-	int err;
-
- again:
-	err = xenbus_transaction_start(&xbt);
-	if (err)
-		return;
-	if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) {
-		printk(KERN_ERR "Unable to read sysrq code in "
-		       "control/sysrq\n");
-		xenbus_transaction_end(xbt, 1);
-		return;
-	}
-
-	if (sysrq_key != '\0')
-		xenbus_printf(xbt, "control", "sysrq", "%c", '\0');
-
-	err = xenbus_transaction_end(xbt, 0);
-	if (err == -EAGAIN)
-		goto again;
-
-	if (sysrq_key != '\0')
-		handle_sysrq(sysrq_key, NULL);
-}
-
-static struct xenbus_watch shutdown_watch = {
-	.node = "control/shutdown",
-	.callback = shutdown_handler
-};
-
-static struct xenbus_watch sysrq_watch = {
-	.node = "control/sysrq",
-	.callback = sysrq_handler
-};
-
-static int setup_shutdown_watcher(void)
-{
-	int err;
-
-	err = register_xenbus_watch(&shutdown_watch);
-	if (err) {
-		printk(KERN_ERR "Failed to set shutdown watcher\n");
-		return err;
-	}
-
-	err = register_xenbus_watch(&sysrq_watch);
-	if (err) {
-		printk(KERN_ERR "Failed to set sysrq watcher\n");
-		return err;
-	}
-
-	return 0;
-}
-
-static int shutdown_event(struct notifier_block *notifier,
-			  unsigned long event,
-			  void *data)
-{
-	setup_shutdown_watcher();
-	return NOTIFY_DONE;
-}
-
-static int __init setup_shutdown_event(void)
-{
-	static struct notifier_block xenstore_notifier = {
-		.notifier_call = shutdown_event
-	};
-	register_xenstore_notifier(&xenstore_notifier);
-
-	return 0;
-}
-
-subsys_initcall(setup_shutdown_event);
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 4e527e7893a8..aa37469da696 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -44,8 +44,10 @@
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
+#include <asm/fixmap.h>
 #include <asm/mmu_context.h>
 #include <asm/paravirt.h>
+#include <asm/linkage.h>
 
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
@@ -56,15 +58,144 @@
 #include "multicalls.h"
 #include "mmu.h"
 
-xmaddr_t arbitrary_virt_to_machine(unsigned long address)
+/*
+ * Just beyond the highest usermode address.  STACK_TOP_MAX has a
+ * redzone above it, so round it up to a PGD boundary.
+ */
+#define USER_LIMIT	((STACK_TOP_MAX + PGDIR_SIZE - 1) & PGDIR_MASK)
+
+
+#define P2M_ENTRIES_PER_PAGE	(PAGE_SIZE / sizeof(unsigned long))
+#define TOP_ENTRIES		(MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE)
+
+/* Placeholder for holes in the address space */
+static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE] __page_aligned_data =
+		{ [ 0 ... P2M_ENTRIES_PER_PAGE-1 ] = ~0UL };
+
+ /* Array of pointers to pages containing p2m entries */
+static unsigned long *p2m_top[TOP_ENTRIES] __page_aligned_data =
+		{ [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] };
+
+/* Arrays of p2m arrays expressed in mfns used for save/restore */
+static unsigned long p2m_top_mfn[TOP_ENTRIES] __page_aligned_bss;
+
+static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE]
+	__page_aligned_bss;
+
+static inline unsigned p2m_top_index(unsigned long pfn)
+{
+	BUG_ON(pfn >= MAX_DOMAIN_PAGES);
+	return pfn / P2M_ENTRIES_PER_PAGE;
+}
+
+static inline unsigned p2m_index(unsigned long pfn)
+{
+	return pfn % P2M_ENTRIES_PER_PAGE;
+}
+
+/* Build the parallel p2m_top_mfn structures */
+void xen_setup_mfn_list_list(void)
+{
+	unsigned pfn, idx;
+
+	for(pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_ENTRIES_PER_PAGE) {
+		unsigned topidx = p2m_top_index(pfn);
+
+		p2m_top_mfn[topidx] = virt_to_mfn(p2m_top[topidx]);
+	}
+
+	for(idx = 0; idx < ARRAY_SIZE(p2m_top_mfn_list); idx++) {
+		unsigned topidx = idx * P2M_ENTRIES_PER_PAGE;
+		p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]);
+	}
+
+	BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
+
+	HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list =
+		virt_to_mfn(p2m_top_mfn_list);
+	HYPERVISOR_shared_info->arch.max_pfn = xen_start_info->nr_pages;
+}
+
+/* Set up p2m_top to point to the domain-builder provided p2m pages */
+void __init xen_build_dynamic_phys_to_machine(void)
+{
+	unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list;
+	unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages);
+	unsigned pfn;
+
+	for(pfn = 0; pfn < max_pfn; pfn += P2M_ENTRIES_PER_PAGE) {
+		unsigned topidx = p2m_top_index(pfn);
+
+		p2m_top[topidx] = &mfn_list[pfn];
+	}
+}
+
+unsigned long get_phys_to_machine(unsigned long pfn)
+{
+	unsigned topidx, idx;
+
+	if (unlikely(pfn >= MAX_DOMAIN_PAGES))
+		return INVALID_P2M_ENTRY;
+
+	topidx = p2m_top_index(pfn);
+	idx = p2m_index(pfn);
+	return p2m_top[topidx][idx];
+}
+EXPORT_SYMBOL_GPL(get_phys_to_machine);
+
+static void alloc_p2m(unsigned long **pp, unsigned long *mfnp)
+{
+	unsigned long *p;
+	unsigned i;
+
+	p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
+	BUG_ON(p == NULL);
+
+	for(i = 0; i < P2M_ENTRIES_PER_PAGE; i++)
+		p[i] = INVALID_P2M_ENTRY;
+
+	if (cmpxchg(pp, p2m_missing, p) != p2m_missing)
+		free_page((unsigned long)p);
+	else
+		*mfnp = virt_to_mfn(p);
+}
+
+void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	unsigned topidx, idx;
+
+	if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
+		BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+		return;
+	}
+
+	if (unlikely(pfn >= MAX_DOMAIN_PAGES)) {
+		BUG_ON(mfn != INVALID_P2M_ENTRY);
+		return;
+	}
+
+	topidx = p2m_top_index(pfn);
+	if (p2m_top[topidx] == p2m_missing) {
+		/* no need to allocate a page to store an invalid entry */
+		if (mfn == INVALID_P2M_ENTRY)
+			return;
+		alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]);
+	}
+
+	idx = p2m_index(pfn);
+	p2m_top[topidx][idx] = mfn;
+}
+
+xmaddr_t arbitrary_virt_to_machine(void *vaddr)
 {
+	unsigned long address = (unsigned long)vaddr;
 	unsigned int level;
 	pte_t *pte = lookup_address(address, &level);
 	unsigned offset = address & ~PAGE_MASK;
 
 	BUG_ON(pte == NULL);
 
-	return XMADDR((pte_mfn(*pte) << PAGE_SHIFT) + offset);
+	return XMADDR(((phys_addr_t)pte_mfn(*pte) << PAGE_SHIFT) + offset);
 }
 
 void make_lowmem_page_readonly(void *vaddr)
@@ -98,59 +229,68 @@ void make_lowmem_page_readwrite(void *vaddr)
 }
 
 
-void xen_set_pmd(pmd_t *ptr, pmd_t val)
+static bool page_pinned(void *ptr)
+{
+	struct page *page = virt_to_page(ptr);
+
+	return PagePinned(page);
+}
+
+static void extend_mmu_update(const struct mmu_update *update)
 {
 	struct multicall_space mcs;
 	struct mmu_update *u;
 
-	preempt_disable();
+	mcs = xen_mc_extend_args(__HYPERVISOR_mmu_update, sizeof(*u));
+
+	if (mcs.mc != NULL)
+		mcs.mc->args[1]++;
+	else {
+		mcs = __xen_mc_entry(sizeof(*u));
+		MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, DOMID_SELF);
+	}
 
-	mcs = xen_mc_entry(sizeof(*u));
 	u = mcs.args;
-	u->ptr = virt_to_machine(ptr).maddr;
-	u->val = pmd_val_ma(val);
-	MULTI_mmu_update(mcs.mc, u, 1, NULL, DOMID_SELF);
+	*u = *update;
+}
+
+void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val)
+{
+	struct mmu_update u;
+
+	preempt_disable();
+
+	xen_mc_batch();
+
+	/* ptr may be ioremapped for 64-bit pagetable setup */
+	u.ptr = arbitrary_virt_to_machine(ptr).maddr;
+	u.val = pmd_val_ma(val);
+	extend_mmu_update(&u);
 
 	xen_mc_issue(PARAVIRT_LAZY_MMU);
 
 	preempt_enable();
 }
 
+void xen_set_pmd(pmd_t *ptr, pmd_t val)
+{
+	/* If page is not pinned, we can just update the entry
+	   directly */
+	if (!page_pinned(ptr)) {
+		*ptr = val;
+		return;
+	}
+
+	xen_set_pmd_hyper(ptr, val);
+}
+
 /*
  * Associate a virtual page frame with a given physical page frame
  * and protection flags for that frame.
  */
 void set_pte_mfn(unsigned long vaddr, unsigned long mfn, pgprot_t flags)
 {
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	pgd = swapper_pg_dir + pgd_index(vaddr);
-	if (pgd_none(*pgd)) {
-		BUG();
-		return;
-	}
-	pud = pud_offset(pgd, vaddr);
-	if (pud_none(*pud)) {
-		BUG();
-		return;
-	}
-	pmd = pmd_offset(pud, vaddr);
-	if (pmd_none(*pmd)) {
-		BUG();
-		return;
-	}
-	pte = pte_offset_kernel(pmd, vaddr);
-	/* <mfn,flags> stored as-is, to permit clearing entries */
-	xen_set_pte(pte, mfn_pte(mfn, flags));
-
-	/*
-	 * It's enough to flush this one mapping.
-	 * (PGE mappings get flushed as well)
-	 */
-	__flush_tlb_one(vaddr);
+	set_pte_vaddr(vaddr, mfn_pte(mfn, flags));
 }
 
 void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
@@ -179,12 +319,32 @@ out:
 		preempt_enable();
 }
 
+pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	/* Just return the pte as-is.  We preserve the bits on commit */
+	return *ptep;
+}
+
+void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
+				 pte_t *ptep, pte_t pte)
+{
+	struct mmu_update u;
+
+	xen_mc_batch();
+
+	u.ptr = virt_to_machine(ptep).maddr | MMU_PT_UPDATE_PRESERVE_AD;
+	u.val = pte_val_ma(pte);
+	extend_mmu_update(&u);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+
 /* Assume pteval_t is equivalent to all the other *val_t types. */
 static pteval_t pte_mfn_to_pfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
-		unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_MASK;
+		unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+		pteval_t flags = val & PTE_FLAGS_MASK;
 		val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
 	}
 
@@ -194,8 +354,8 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
 static pteval_t pte_pfn_to_mfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
-		unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_MASK;
+		unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+		pteval_t flags = val & PTE_FLAGS_MASK;
 		val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
 	}
 
@@ -229,34 +389,51 @@ pmdval_t xen_pmd_val(pmd_t pmd)
 	return pte_mfn_to_pfn(pmd.pmd);
 }
 
-void xen_set_pud(pud_t *ptr, pud_t val)
+void xen_set_pud_hyper(pud_t *ptr, pud_t val)
 {
-	struct multicall_space mcs;
-	struct mmu_update *u;
+	struct mmu_update u;
 
 	preempt_disable();
 
-	mcs = xen_mc_entry(sizeof(*u));
-	u = mcs.args;
-	u->ptr = virt_to_machine(ptr).maddr;
-	u->val = pud_val_ma(val);
-	MULTI_mmu_update(mcs.mc, u, 1, NULL, DOMID_SELF);
+	xen_mc_batch();
+
+	/* ptr may be ioremapped for 64-bit pagetable setup */
+	u.ptr = arbitrary_virt_to_machine(ptr).maddr;
+	u.val = pud_val_ma(val);
+	extend_mmu_update(&u);
 
 	xen_mc_issue(PARAVIRT_LAZY_MMU);
 
 	preempt_enable();
 }
 
+void xen_set_pud(pud_t *ptr, pud_t val)
+{
+	/* If page is not pinned, we can just update the entry
+	   directly */
+	if (!page_pinned(ptr)) {
+		*ptr = val;
+		return;
+	}
+
+	xen_set_pud_hyper(ptr, val);
+}
+
 void xen_set_pte(pte_t *ptep, pte_t pte)
 {
+#ifdef CONFIG_X86_PAE
 	ptep->pte_high = pte.pte_high;
 	smp_wmb();
 	ptep->pte_low = pte.pte_low;
+#else
+	*ptep = pte;
+#endif
 }
 
+#ifdef CONFIG_X86_PAE
 void xen_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
-	set_64bit((u64 *)ptep, pte_val_ma(pte));
+	set_64bit((u64 *)ptep, native_pte_val(pte));
 }
 
 void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
@@ -268,8 +445,9 @@ void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 
 void xen_pmd_clear(pmd_t *pmdp)
 {
-	xen_set_pmd(pmdp, __pmd(0));
+	set_pmd(pmdp, __pmd(0));
 }
+#endif	/* CONFIG_X86_PAE */
 
 pmd_t xen_make_pmd(pmdval_t pmd)
 {
@@ -277,78 +455,189 @@ pmd_t xen_make_pmd(pmdval_t pmd)
 	return native_make_pmd(pmd);
 }
 
+#if PAGETABLE_LEVELS == 4
+pudval_t xen_pud_val(pud_t pud)
+{
+	return pte_mfn_to_pfn(pud.pud);
+}
+
+pud_t xen_make_pud(pudval_t pud)
+{
+	pud = pte_pfn_to_mfn(pud);
+
+	return native_make_pud(pud);
+}
+
+pgd_t *xen_get_user_pgd(pgd_t *pgd)
+{
+	pgd_t *pgd_page = (pgd_t *)(((unsigned long)pgd) & PAGE_MASK);
+	unsigned offset = pgd - pgd_page;
+	pgd_t *user_ptr = NULL;
+
+	if (offset < pgd_index(USER_LIMIT)) {
+		struct page *page = virt_to_page(pgd_page);
+		user_ptr = (pgd_t *)page->private;
+		if (user_ptr)
+			user_ptr += offset;
+	}
+
+	return user_ptr;
+}
+
+static void __xen_set_pgd_hyper(pgd_t *ptr, pgd_t val)
+{
+	struct mmu_update u;
+
+	u.ptr = virt_to_machine(ptr).maddr;
+	u.val = pgd_val_ma(val);
+	extend_mmu_update(&u);
+}
+
 /*
-  (Yet another) pagetable walker.  This one is intended for pinning a
-  pagetable.  This means that it walks a pagetable and calls the
-  callback function on each page it finds making up the page table,
-  at every level.  It walks the entire pagetable, but it only bothers
-  pinning pte pages which are below pte_limit.  In the normal case
-  this will be TASK_SIZE, but at boot we need to pin up to
-  FIXADDR_TOP.  But the important bit is that we don't pin beyond
-  there, because then we start getting into Xen's ptes.
-*/
-static int pgd_walk(pgd_t *pgd_base, int (*func)(struct page *, enum pt_level),
+ * Raw hypercall-based set_pgd, intended for in early boot before
+ * there's a page structure.  This implies:
+ *  1. The only existing pagetable is the kernel's
+ *  2. It is always pinned
+ *  3. It has no user pagetable attached to it
+ */
+void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val)
+{
+	preempt_disable();
+
+	xen_mc_batch();
+
+	__xen_set_pgd_hyper(ptr, val);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+	preempt_enable();
+}
+
+void xen_set_pgd(pgd_t *ptr, pgd_t val)
+{
+	pgd_t *user_ptr = xen_get_user_pgd(ptr);
+
+	/* If page is not pinned, we can just update the entry
+	   directly */
+	if (!page_pinned(ptr)) {
+		*ptr = val;
+		if (user_ptr) {
+			WARN_ON(page_pinned(user_ptr));
+			*user_ptr = val;
+		}
+		return;
+	}
+
+	/* If it's pinned, then we can at least batch the kernel and
+	   user updates together. */
+	xen_mc_batch();
+
+	__xen_set_pgd_hyper(ptr, val);
+	if (user_ptr)
+		__xen_set_pgd_hyper(user_ptr, val);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+#endif	/* PAGETABLE_LEVELS == 4 */
+
+/*
+ * (Yet another) pagetable walker.  This one is intended for pinning a
+ * pagetable.  This means that it walks a pagetable and calls the
+ * callback function on each page it finds making up the page table,
+ * at every level.  It walks the entire pagetable, but it only bothers
+ * pinning pte pages which are below limit.  In the normal case this
+ * will be STACK_TOP_MAX, but at boot we need to pin up to
+ * FIXADDR_TOP.
+ *
+ * For 32-bit the important bit is that we don't pin beyond there,
+ * because then we start getting into Xen's ptes.
+ *
+ * For 64-bit, we must skip the Xen hole in the middle of the address
+ * space, just after the big x86-64 virtual hole.
+ */
+static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
 		    unsigned long limit)
 {
-	pgd_t *pgd = pgd_base;
 	int flush = 0;
-	unsigned long addr = 0;
-	unsigned long pgd_next;
+	unsigned hole_low, hole_high;
+	unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
+	unsigned pgdidx, pudidx, pmdidx;
 
-	BUG_ON(limit > FIXADDR_TOP);
+	/* The limit is the last byte to be touched */
+	limit--;
+	BUG_ON(limit >= FIXADDR_TOP);
 
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return 0;
 
-	for (; addr != FIXADDR_TOP; pgd++, addr = pgd_next) {
+	/*
+	 * 64-bit has a great big hole in the middle of the address
+	 * space, which contains the Xen mappings.  On 32-bit these
+	 * will end up making a zero-sized hole and so is a no-op.
+	 */
+	hole_low = pgd_index(USER_LIMIT);
+	hole_high = pgd_index(PAGE_OFFSET);
+
+	pgdidx_limit = pgd_index(limit);
+#if PTRS_PER_PUD > 1
+	pudidx_limit = pud_index(limit);
+#else
+	pudidx_limit = 0;
+#endif
+#if PTRS_PER_PMD > 1
+	pmdidx_limit = pmd_index(limit);
+#else
+	pmdidx_limit = 0;
+#endif
+
+	flush |= (*func)(virt_to_page(pgd), PT_PGD);
+
+	for (pgdidx = 0; pgdidx <= pgdidx_limit; pgdidx++) {
 		pud_t *pud;
-		unsigned long pud_limit, pud_next;
 
-		pgd_next = pud_limit = pgd_addr_end(addr, FIXADDR_TOP);
+		if (pgdidx >= hole_low && pgdidx < hole_high)
+			continue;
 
-		if (!pgd_val(*pgd))
+		if (!pgd_val(pgd[pgdidx]))
 			continue;
 
-		pud = pud_offset(pgd, 0);
+		pud = pud_offset(&pgd[pgdidx], 0);
 
 		if (PTRS_PER_PUD > 1) /* not folded */
 			flush |= (*func)(virt_to_page(pud), PT_PUD);
 
-		for (; addr != pud_limit; pud++, addr = pud_next) {
+		for (pudidx = 0; pudidx < PTRS_PER_PUD; pudidx++) {
 			pmd_t *pmd;
-			unsigned long pmd_limit;
 
-			pud_next = pud_addr_end(addr, pud_limit);
-
-			if (pud_next < limit)
-				pmd_limit = pud_next;
-			else
-				pmd_limit = limit;
+			if (pgdidx == pgdidx_limit &&
+			    pudidx > pudidx_limit)
+				goto out;
 
-			if (pud_none(*pud))
+			if (pud_none(pud[pudidx]))
 				continue;
 
-			pmd = pmd_offset(pud, 0);
+			pmd = pmd_offset(&pud[pudidx], 0);
 
 			if (PTRS_PER_PMD > 1) /* not folded */
 				flush |= (*func)(virt_to_page(pmd), PT_PMD);
 
-			for (; addr != pmd_limit; pmd++) {
-				addr += (PAGE_SIZE * PTRS_PER_PTE);
-				if ((pmd_limit-1) < (addr-1)) {
-					addr = pmd_limit;
-					break;
-				}
+			for (pmdidx = 0; pmdidx < PTRS_PER_PMD; pmdidx++) {
+				struct page *pte;
+
+				if (pgdidx == pgdidx_limit &&
+				    pudidx == pudidx_limit &&
+				    pmdidx > pmdidx_limit)
+					goto out;
 
-				if (pmd_none(*pmd))
+				if (pmd_none(pmd[pmdidx]))
 					continue;
 
-				flush |= (*func)(pmd_page(*pmd), PT_PTE);
+				pte = pmd_page(pmd[pmdidx]);
+				flush |= (*func)(pte, PT_PTE);
 			}
 		}
 	}
-
-	flush |= (*func)(virt_to_page(pgd_base), PT_PGD);
+out:
 
 	return flush;
 }
@@ -430,20 +719,62 @@ void xen_pgd_pin(pgd_t *pgd)
 {
 	xen_mc_batch();
 
-	if (pgd_walk(pgd, pin_page, TASK_SIZE)) {
+	if (pgd_walk(pgd, pin_page, USER_LIMIT)) {
 		/* re-enable interrupts for kmap_flush_unused */
 		xen_mc_issue(0);
 		kmap_flush_unused();
 		xen_mc_batch();
 	}
 
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+		xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(pgd)));
+
+		if (user_pgd) {
+			pin_page(virt_to_page(user_pgd), PT_PGD);
+			xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(user_pgd)));
+		}
+	}
+#else /* CONFIG_X86_32 */
+#ifdef CONFIG_X86_PAE
+	/* Need to make sure unshared kernel PMD is pinnable */
+	pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+#endif
 	xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
+#endif /* CONFIG_X86_64 */
 	xen_mc_issue(0);
 }
 
-/* The init_mm pagetable is really pinned as soon as its created, but
-   that's before we have page structures to store the bits.  So do all
-   the book-keeping now. */
+/*
+ * On save, we need to pin all pagetables to make sure they get their
+ * mfns turned into pfns.  Search the list for any unpinned pgds and pin
+ * them (unpinned pgds are not currently in use, probably because the
+ * process is under construction or destruction).
+ */
+void xen_mm_pin_all(void)
+{
+	unsigned long flags;
+	struct page *page;
+
+	spin_lock_irqsave(&pgd_lock, flags);
+
+	list_for_each_entry(page, &pgd_list, lru) {
+		if (!PagePinned(page)) {
+			xen_pgd_pin((pgd_t *)page_address(page));
+			SetPageSavePinned(page);
+		}
+	}
+
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+/*
+ * The init_mm pagetable is really pinned as soon as its created, but
+ * that's before we have page structures to store the bits.  So do all
+ * the book-keeping now.
+ */
 static __init int mark_pinned(struct page *page, enum pt_level level)
 {
 	SetPagePinned(page);
@@ -493,11 +824,49 @@ static void xen_pgd_unpin(pgd_t *pgd)
 
 	xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-	pgd_walk(pgd, unpin_page, TASK_SIZE);
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+		if (user_pgd) {
+			xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(user_pgd)));
+			unpin_page(virt_to_page(user_pgd), PT_PGD);
+		}
+	}
+#endif
+
+#ifdef CONFIG_X86_PAE
+	/* Need to make sure unshared kernel PMD is unpinned */
+	pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+#endif
+
+	pgd_walk(pgd, unpin_page, USER_LIMIT);
 
 	xen_mc_issue(0);
 }
 
+/*
+ * On resume, undo any pinning done at save, so that the rest of the
+ * kernel doesn't see any unexpected pinned pagetables.
+ */
+void xen_mm_unpin_all(void)
+{
+	unsigned long flags;
+	struct page *page;
+
+	spin_lock_irqsave(&pgd_lock, flags);
+
+	list_for_each_entry(page, &pgd_list, lru) {
+		if (PageSavePinned(page)) {
+			BUG_ON(!PagePinned(page));
+			xen_pgd_unpin((pgd_t *)page_address(page));
+			ClearPageSavePinned(page);
+		}
+	}
+
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
 void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next)
 {
 	spin_lock(&next->page_table_lock);
@@ -519,8 +888,15 @@ void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
 static void drop_other_mm_ref(void *info)
 {
 	struct mm_struct *mm = info;
+	struct mm_struct *active_mm;
+
+#ifdef CONFIG_X86_64
+	active_mm = read_pda(active_mm);
+#else
+	active_mm = __get_cpu_var(cpu_tlbstate).active_mm;
+#endif
 
-	if (__get_cpu_var(cpu_tlbstate).active_mm == mm)
+	if (active_mm == mm)
 		leave_mm(smp_processor_id());
 
 	/* If this cpu still has a stale cr3 reference, then make sure
@@ -558,7 +934,7 @@ static void drop_mm_ref(struct mm_struct *mm)
 	}
 
 	if (!cpus_empty(mask))
-		xen_smp_call_function_mask(mask, drop_other_mm_ref, mm, 1);
+		smp_call_function_mask(mask, drop_other_mm_ref, mm, 1);
 }
 #else
 static void drop_mm_ref(struct mm_struct *mm)
@@ -591,7 +967,7 @@ void xen_exit_mmap(struct mm_struct *mm)
 	spin_lock(&mm->page_table_lock);
 
 	/* pgd may not be pinned in the error exit path of execve */
-	if (PagePinned(virt_to_page(mm->pgd)))
+	if (page_pinned(mm->pgd))
 		xen_pgd_unpin(mm->pgd);
 
 	spin_unlock(&mm->page_table_lock);
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 5fe961caffd4..0f59bd03f9e3 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -10,25 +10,9 @@ enum pt_level {
 	PT_PTE
 };
 
-/*
- * Page-directory addresses above 4GB do not fit into architectural %cr3.
- * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
- * must use the following accessor macros to pack/unpack valid MFNs.
- *
- * Note that Xen is using the fact that the pagetable base is always
- * page-aligned, and putting the 12 MSB of the address into the 12 LSB
- * of cr3.
- */
-#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
-#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
-
 
 void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
 
-void xen_set_pte(pte_t *ptep, pte_t pteval);
-void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
-		    pte_t *ptep, pte_t pteval);
-void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval);
 
 void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next);
 void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm);
@@ -45,11 +29,32 @@ pte_t xen_make_pte(pteval_t);
 pmd_t xen_make_pmd(pmdval_t);
 pgd_t xen_make_pgd(pgdval_t);
 
+void xen_set_pte(pte_t *ptep, pte_t pteval);
 void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
 		    pte_t *ptep, pte_t pteval);
+
+#ifdef CONFIG_X86_PAE
 void xen_set_pte_atomic(pte_t *ptep, pte_t pte);
-void xen_set_pud(pud_t *ptr, pud_t val);
 void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
 void xen_pmd_clear(pmd_t *pmdp);
+#endif	/* CONFIG_X86_PAE */
+
+void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval);
+void xen_set_pud(pud_t *ptr, pud_t val);
+void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval);
+void xen_set_pud_hyper(pud_t *ptr, pud_t val);
+
+#if PAGETABLE_LEVELS == 4
+pudval_t xen_pud_val(pud_t pud);
+pud_t xen_make_pud(pudval_t pudval);
+void xen_set_pgd(pgd_t *pgdp, pgd_t pgd);
+void xen_set_pgd_hyper(pgd_t *pgdp, pgd_t pgd);
+#endif
+
+pgd_t *xen_get_user_pgd(pgd_t *pgd);
+
+pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+void  xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
+				  pte_t *ptep, pte_t pte);
 
 #endif	/* _XEN_MMU_H */
diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 5791eb2e3750..9efd1c6c9776 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -29,14 +29,14 @@
 #define MC_DEBUG	1
 
 #define MC_BATCH	32
-#define MC_ARGS		(MC_BATCH * 16 / sizeof(u64))
+#define MC_ARGS		(MC_BATCH * 16)
 
 struct mc_buffer {
 	struct multicall_entry entries[MC_BATCH];
 #if MC_DEBUG
 	struct multicall_entry debug[MC_BATCH];
 #endif
-	u64 args[MC_ARGS];
+	unsigned char args[MC_ARGS];
 	struct callback {
 		void (*fn)(void *);
 		void *data;
@@ -76,6 +76,7 @@ void xen_mc_flush(void)
 		if (ret) {
 			printk(KERN_ERR "%d multicall(s) failed: cpu %d\n",
 			       ret, smp_processor_id());
+			dump_stack();
 			for (i = 0; i < b->mcidx; i++) {
 				printk("  call %2d/%d: op=%lu arg=[%lx] result=%ld\n",
 				       i+1, b->mcidx,
@@ -107,20 +108,48 @@ struct multicall_space __xen_mc_entry(size_t args)
 {
 	struct mc_buffer *b = &__get_cpu_var(mc_buffer);
 	struct multicall_space ret;
-	unsigned argspace = (args + sizeof(u64) - 1) / sizeof(u64);
+	unsigned argidx = roundup(b->argidx, sizeof(u64));
 
 	BUG_ON(preemptible());
-	BUG_ON(argspace > MC_ARGS);
+	BUG_ON(b->argidx > MC_ARGS);
 
 	if (b->mcidx == MC_BATCH ||
-	    (b->argidx + argspace) > MC_ARGS)
+	    (argidx + args) > MC_ARGS) {
 		xen_mc_flush();
+		argidx = roundup(b->argidx, sizeof(u64));
+	}
 
 	ret.mc = &b->entries[b->mcidx];
 	b->mcidx++;
+	ret.args = &b->args[argidx];
+	b->argidx = argidx + args;
+
+	BUG_ON(b->argidx > MC_ARGS);
+	return ret;
+}
+
+struct multicall_space xen_mc_extend_args(unsigned long op, size_t size)
+{
+	struct mc_buffer *b = &__get_cpu_var(mc_buffer);
+	struct multicall_space ret = { NULL, NULL };
+
+	BUG_ON(preemptible());
+	BUG_ON(b->argidx > MC_ARGS);
+
+	if (b->mcidx == 0)
+		return ret;
+
+	if (b->entries[b->mcidx - 1].op != op)
+		return ret;
+
+	if ((b->argidx + size) > MC_ARGS)
+		return ret;
+
+	ret.mc = &b->entries[b->mcidx - 1];
 	ret.args = &b->args[b->argidx];
-	b->argidx += argspace;
+	b->argidx += size;
 
+	BUG_ON(b->argidx > MC_ARGS);
 	return ret;
 }
 
diff --git a/arch/x86/xen/multicalls.h b/arch/x86/xen/multicalls.h
index 8bae996d99a3..858938241616 100644
--- a/arch/x86/xen/multicalls.h
+++ b/arch/x86/xen/multicalls.h
@@ -45,4 +45,16 @@ static inline void xen_mc_issue(unsigned mode)
 /* Set up a callback to be called when the current batch is flushed */
 void xen_mc_callback(void (*fn)(void *), void *data);
 
+/*
+ * Try to extend the arguments of the previous multicall command.  The
+ * previous command's op must match.  If it does, then it attempts to
+ * extend the argument space allocated to the multicall entry by
+ * arg_size bytes.
+ *
+ * The returned multicall_space will return with mc pointing to the
+ * command on success, or NULL on failure, and args pointing to the
+ * newly allocated space.
+ */
+struct multicall_space xen_mc_extend_args(unsigned long op, size_t arg_size);
+
 #endif /* _XEN_MULTICALLS_H */
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 82517e4a752a..b6acc3a0af46 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -13,9 +13,11 @@
 #include <asm/vdso.h>
 #include <asm/e820.h>
 #include <asm/setup.h>
+#include <asm/acpi.h>
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
 
+#include <xen/page.h>
 #include <xen/interface/callback.h>
 #include <xen/interface/physdev.h>
 #include <xen/features.h>
@@ -27,8 +29,6 @@
 extern const char xen_hypervisor_callback[];
 extern const char xen_failsafe_callback[];
 
-unsigned long *phys_to_machine_mapping;
-EXPORT_SYMBOL(phys_to_machine_mapping);
 
 /**
  * machine_specific_memory_setup - Hook for machine specific memory setup.
@@ -38,9 +38,31 @@ char * __init xen_memory_setup(void)
 {
 	unsigned long max_pfn = xen_start_info->nr_pages;
 
+	max_pfn = min(MAX_DOMAIN_PAGES, max_pfn);
+
 	e820.nr_map = 0;
-	add_memory_region(0, LOWMEMSIZE(), E820_RAM);
-	add_memory_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM);
+
+	e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM);
+
+	/*
+	 * Even though this is normal, usable memory under Xen, reserve
+	 * ISA memory anyway because too many things think they can poke
+	 * about in there.
+	 */
+	e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
+			E820_RESERVED);
+
+	/*
+	 * Reserve Xen bits:
+	 *  - mfn_list
+	 *  - xen_start_info
+	 * See comment above "struct start_info" in <xen/interface/xen.h>
+	 */
+	e820_add_region(__pa(xen_start_info->mfn_list),
+			xen_start_info->pt_base - xen_start_info->mfn_list,
+			E820_RESERVED);
+
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
 	return "Xen";
 }
@@ -61,30 +83,72 @@ static void xen_idle(void)
 
 /*
  * Set the bit indicating "nosegneg" library variants should be used.
+ * We only need to bother in pure 32-bit mode; compat 32-bit processes
+ * can have un-truncated segments, so wrapping around is allowed.
  */
 static void __init fiddle_vdso(void)
 {
-	extern const char vdso32_default_start;
-	u32 *mask = VDSO32_SYMBOL(&vdso32_default_start, NOTE_MASK);
+#ifdef CONFIG_X86_32
+	u32 *mask;
+	mask = VDSO32_SYMBOL(&vdso32_int80_start, NOTE_MASK);
+	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+	mask = VDSO32_SYMBOL(&vdso32_sysenter_start, NOTE_MASK);
 	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+#endif
 }
 
-void xen_enable_sysenter(void)
+static __cpuinit int register_callback(unsigned type, const void *func)
 {
-	int cpu = smp_processor_id();
-	extern void xen_sysenter_target(void);
-	/* Mask events on entry, even though they get enabled immediately */
-	static struct callback_register sysenter = {
-		.type = CALLBACKTYPE_sysenter,
-		.address = { __KERNEL_CS, (unsigned long)xen_sysenter_target },
+	struct callback_register callback = {
+		.type = type,
+		.address = XEN_CALLBACK(__KERNEL_CS, func),
 		.flags = CALLBACKF_mask_events,
 	};
 
-	if (!boot_cpu_has(X86_FEATURE_SEP) ||
-	    HYPERVISOR_callback_op(CALLBACKOP_register, &sysenter) != 0) {
-		clear_cpu_cap(&cpu_data(cpu), X86_FEATURE_SEP);
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP);
+	return HYPERVISOR_callback_op(CALLBACKOP_register, &callback);
+}
+
+void __cpuinit xen_enable_sysenter(void)
+{
+	extern void xen_sysenter_target(void);
+	int ret;
+	unsigned sysenter_feature;
+
+#ifdef CONFIG_X86_32
+	sysenter_feature = X86_FEATURE_SEP;
+#else
+	sysenter_feature = X86_FEATURE_SYSENTER32;
+#endif
+
+	if (!boot_cpu_has(sysenter_feature))
+		return;
+
+	ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
+	if(ret != 0)
+		setup_clear_cpu_cap(sysenter_feature);
+}
+
+void __cpuinit xen_enable_syscall(void)
+{
+#ifdef CONFIG_X86_64
+	int ret;
+	extern void xen_syscall_target(void);
+	extern void xen_syscall32_target(void);
+
+	ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
+		/* Pretty fatal; 64-bit userspace has no other
+		   mechanism for syscalls. */
+	}
+
+	if (boot_cpu_has(X86_FEATURE_SYSCALL32)) {
+		ret = register_callback(CALLBACKTYPE_syscall32,
+					xen_syscall32_target);
+		if (ret != 0)
+			setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
 	}
+#endif /* CONFIG_X86_64 */
 }
 
 void __init xen_arch_setup(void)
@@ -98,10 +162,12 @@ void __init xen_arch_setup(void)
 	if (!xen_feature(XENFEAT_auto_translated_physmap))
 		HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_pae_extended_cr3);
 
-	HYPERVISOR_set_callbacks(__KERNEL_CS, (unsigned long)xen_hypervisor_callback,
-				 __KERNEL_CS, (unsigned long)xen_failsafe_callback);
+	if (register_callback(CALLBACKTYPE_event, xen_hypervisor_callback) ||
+	    register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
+		BUG();
 
 	xen_enable_sysenter();
+	xen_enable_syscall();
 
 	set_iopl.iopl = 1;
 	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
@@ -121,11 +187,6 @@ void __init xen_arch_setup(void)
 
 	pm_idle = xen_idle;
 
-#ifdef CONFIG_SMP
-	/* fill cpus_possible with all available cpus */
-	xen_fill_possible_map();
-#endif
-
 	paravirt_disable_iospace();
 
 	fiddle_vdso();
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 94e69000f982..d8faf79a0a1d 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -15,6 +15,7 @@
  * This does not handle HOTPLUG_CPU yet.
  */
 #include <linux/sched.h>
+#include <linux/kernel_stat.h>
 #include <linux/err.h>
 #include <linux/smp.h>
 
@@ -35,28 +36,17 @@
 #include "xen-ops.h"
 #include "mmu.h"
 
-static cpumask_t xen_cpu_initialized_map;
-static DEFINE_PER_CPU(int, resched_irq) = -1;
-static DEFINE_PER_CPU(int, callfunc_irq) = -1;
-static DEFINE_PER_CPU(int, debug_irq) = -1;
+static void __cpuinit xen_init_lock_cpu(int cpu);
 
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-};
+cpumask_t xen_cpu_initialized_map;
 
-static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id);
+static DEFINE_PER_CPU(int, resched_irq);
+static DEFINE_PER_CPU(int, callfunc_irq);
+static DEFINE_PER_CPU(int, callfuncsingle_irq);
+static DEFINE_PER_CPU(int, debug_irq) = -1;
 
-static struct call_data_struct *call_data;
+static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id);
+static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id);
 
 /*
  * Reschedule call back. Nothing to do,
@@ -65,6 +55,12 @@ static struct call_data_struct *call_data;
  */
 static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id)
 {
+#ifdef CONFIG_X86_32
+	__get_cpu_var(irq_stat).irq_resched_count++;
+#else
+	add_pda(irq_resched_count, 1);
+#endif
+
 	return IRQ_HANDLED;
 }
 
@@ -73,13 +69,22 @@ static __cpuinit void cpu_bringup_and_idle(void)
 	int cpu = smp_processor_id();
 
 	cpu_init();
+	preempt_disable();
+
 	xen_enable_sysenter();
+	xen_enable_syscall();
 
-	preempt_disable();
-	per_cpu(cpu_state, cpu) = CPU_ONLINE;
+	cpu = smp_processor_id();
+	smp_store_cpu_info(cpu);
+	cpu_data(cpu).x86_max_cores = 1;
+	set_cpu_sibling_map(cpu);
 
 	xen_setup_cpu_clockevents();
 
+	cpu_set(cpu, cpu_online_map);
+	x86_write_percpu(cpu_state, CPU_ONLINE);
+	wmb();
+
 	/* We can take interrupts now: we're officially "up". */
 	local_irq_enable();
 
@@ -122,6 +127,17 @@ static int xen_smp_intr_init(unsigned int cpu)
 		goto fail;
 	per_cpu(debug_irq, cpu) = rc;
 
+	callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu);
+	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR,
+				    cpu,
+				    xen_call_function_single_interrupt,
+				    IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				    callfunc_name,
+				    NULL);
+	if (rc < 0)
+		goto fail;
+	per_cpu(callfuncsingle_irq, cpu) = rc;
+
 	return 0;
 
  fail:
@@ -131,59 +147,45 @@ static int xen_smp_intr_init(unsigned int cpu)
 		unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL);
 	if (per_cpu(debug_irq, cpu) >= 0)
 		unbind_from_irqhandler(per_cpu(debug_irq, cpu), NULL);
+	if (per_cpu(callfuncsingle_irq, cpu) >= 0)
+		unbind_from_irqhandler(per_cpu(callfuncsingle_irq, cpu), NULL);
+
 	return rc;
 }
 
-void __init xen_fill_possible_map(void)
+static void __init xen_fill_possible_map(void)
 {
 	int i, rc;
 
 	for (i = 0; i < NR_CPUS; i++) {
 		rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
-		if (rc >= 0)
+		if (rc >= 0) {
+			num_processors++;
 			cpu_set(i, cpu_possible_map);
+		}
 	}
 }
 
-void __init xen_smp_prepare_boot_cpu(void)
+static void __init xen_smp_prepare_boot_cpu(void)
 {
-	int cpu;
-
 	BUG_ON(smp_processor_id() != 0);
 	native_smp_prepare_boot_cpu();
 
 	/* We've switched to the "real" per-cpu gdt, so make sure the
 	   old memory can be recycled */
-	make_lowmem_page_readwrite(&per_cpu__gdt_page);
-
-	for_each_possible_cpu(cpu) {
-		cpus_clear(per_cpu(cpu_sibling_map, cpu));
-		/*
-		 * cpu_core_map lives in a per cpu area that is cleared
-		 * when the per cpu array is allocated.
-		 *
-		 * cpus_clear(per_cpu(cpu_core_map, cpu));
-		 */
-	}
+	make_lowmem_page_readwrite(&per_cpu_var(gdt_page));
 
 	xen_setup_vcpu_info_placement();
 }
 
-void __init xen_smp_prepare_cpus(unsigned int max_cpus)
+static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned cpu;
 
-	for_each_possible_cpu(cpu) {
-		cpus_clear(per_cpu(cpu_sibling_map, cpu));
-		/*
-		 * cpu_core_ map will be zeroed when the per
-		 * cpu area is allocated.
-		 *
-		 * cpus_clear(per_cpu(cpu_core_map, cpu));
-		 */
-	}
+	xen_init_lock_cpu(0);
 
 	smp_store_cpu_info(0);
+	cpu_data(0).x86_max_cores = 1;
 	set_cpu_sibling_map(0);
 
 	if (xen_smp_intr_init(0))
@@ -218,7 +220,7 @@ static __cpuinit int
 cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 {
 	struct vcpu_guest_context *ctxt;
-	struct gdt_page *gdt = &per_cpu(gdt_page, cpu);
+	struct desc_struct *gdt;
 
 	if (cpu_test_and_set(cpu, xen_cpu_initialized_map))
 		return 0;
@@ -227,12 +229,15 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	if (ctxt == NULL)
 		return -ENOMEM;
 
+	gdt = get_cpu_gdt_table(cpu);
+
 	ctxt->flags = VGCF_IN_KERNEL;
 	ctxt->user_regs.ds = __USER_DS;
 	ctxt->user_regs.es = __USER_DS;
-	ctxt->user_regs.fs = __KERNEL_PERCPU;
-	ctxt->user_regs.gs = 0;
 	ctxt->user_regs.ss = __KERNEL_DS;
+#ifdef CONFIG_X86_32
+	ctxt->user_regs.fs = __KERNEL_PERCPU;
+#endif
 	ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
 	ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
 
@@ -242,11 +247,11 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 
 	ctxt->ldt_ents = 0;
 
-	BUG_ON((unsigned long)gdt->gdt & ~PAGE_MASK);
-	make_lowmem_page_readonly(gdt->gdt);
+	BUG_ON((unsigned long)gdt & ~PAGE_MASK);
+	make_lowmem_page_readonly(gdt);
 
-	ctxt->gdt_frames[0] = virt_to_mfn(gdt->gdt);
-	ctxt->gdt_ents      = ARRAY_SIZE(gdt->gdt);
+	ctxt->gdt_frames[0] = virt_to_mfn(gdt);
+	ctxt->gdt_ents      = GDT_ENTRIES;
 
 	ctxt->user_regs.cs = __KERNEL_CS;
 	ctxt->user_regs.esp = idle->thread.sp0 - sizeof(struct pt_regs);
@@ -254,9 +259,11 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	ctxt->kernel_ss = __KERNEL_DS;
 	ctxt->kernel_sp = idle->thread.sp0;
 
+#ifdef CONFIG_X86_32
 	ctxt->event_callback_cs     = __KERNEL_CS;
-	ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
 	ctxt->failsafe_callback_cs  = __KERNEL_CS;
+#endif
+	ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
 	ctxt->failsafe_callback_eip = (unsigned long)xen_failsafe_callback;
 
 	per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
@@ -269,7 +276,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-int __cpuinit xen_cpu_up(unsigned int cpu)
+static int __cpuinit xen_cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle = idle_task(cpu);
 	int rc;
@@ -280,10 +287,28 @@ int __cpuinit xen_cpu_up(unsigned int cpu)
 		return rc;
 #endif
 
+#ifdef CONFIG_X86_64
+	/* Allocate node local memory for AP pdas */
+	WARN_ON(cpu == 0);
+	if (cpu > 0) {
+		rc = get_local_pda(cpu);
+		if (rc)
+			return rc;
+	}
+#endif
+
+#ifdef CONFIG_X86_32
 	init_gdt(cpu);
 	per_cpu(current_task, cpu) = idle;
 	irq_ctx_init(cpu);
+#else
+	cpu_pda(cpu)->pcurrent = idle;
+	clear_tsk_thread_flag(idle, TIF_FORK);
+#endif
 	xen_setup_timer(cpu);
+	xen_init_lock_cpu(cpu);
+
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
 	/* make sure interrupts start blocked */
 	per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;
@@ -299,20 +324,18 @@ int __cpuinit xen_cpu_up(unsigned int cpu)
 	if (rc)
 		return rc;
 
-	smp_store_cpu_info(cpu);
-	set_cpu_sibling_map(cpu);
-	/* This must be done before setting cpu_online_map */
-	wmb();
-
-	cpu_set(cpu, cpu_online_map);
-
 	rc = HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL);
 	BUG_ON(rc);
 
+	while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
+		HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+		barrier();
+	}
+
 	return 0;
 }
 
-void xen_smp_cpus_done(unsigned int max_cpus)
+static void xen_smp_cpus_done(unsigned int max_cpus)
 {
 }
 
@@ -328,104 +351,254 @@ static void stop_self(void *v)
 	BUG();
 }
 
-void xen_smp_send_stop(void)
+static void xen_smp_send_stop(void)
 {
-	smp_call_function(stop_self, NULL, 0, 0);
+	smp_call_function(stop_self, NULL, 0);
 }
 
-void xen_smp_send_reschedule(int cpu)
+static void xen_smp_send_reschedule(int cpu)
 {
 	xen_send_IPI_one(cpu, XEN_RESCHEDULE_VECTOR);
 }
 
-
 static void xen_send_IPI_mask(cpumask_t mask, enum ipi_vector vector)
 {
 	unsigned cpu;
 
 	cpus_and(mask, mask, cpu_online_map);
 
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu_mask_nr(cpu, mask)
 		xen_send_IPI_one(cpu, vector);
 }
 
+static void xen_smp_send_call_function_ipi(cpumask_t mask)
+{
+	int cpu;
+
+	xen_send_IPI_mask(mask, XEN_CALL_FUNCTION_VECTOR);
+
+	/* Make sure other vcpus get a chance to run if they need to. */
+	for_each_cpu_mask_nr(cpu, mask) {
+		if (xen_vcpu_stolen(cpu)) {
+			HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+			break;
+		}
+	}
+}
+
+static void xen_smp_send_call_function_single_ipi(int cpu)
+{
+	xen_send_IPI_mask(cpumask_of_cpu(cpu), XEN_CALL_FUNCTION_SINGLE_VECTOR);
+}
+
 static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
 	irq_enter();
-	(*func)(info);
+	generic_smp_call_function_interrupt();
+#ifdef CONFIG_X86_32
 	__get_cpu_var(irq_stat).irq_call_count++;
+#else
+	add_pda(irq_call_count, 1);
+#endif
 	irq_exit();
 
-	if (wait) {
-		mb();		/* commit everything before setting finished */
-		atomic_inc(&call_data->finished);
-	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id)
+{
+	irq_enter();
+	generic_smp_call_function_single_interrupt();
+#ifdef CONFIG_X86_32
+	__get_cpu_var(irq_stat).irq_call_count++;
+#else
+	add_pda(irq_call_count, 1);
+#endif
+	irq_exit();
 
 	return IRQ_HANDLED;
 }
 
-int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *),
-			       void *info, int wait)
+struct xen_spinlock {
+	unsigned char lock;		/* 0 -> free; 1 -> locked */
+	unsigned short spinners;	/* count of waiting cpus */
+};
+
+static int xen_spin_is_locked(struct raw_spinlock *lock)
 {
-	struct call_data_struct data;
-	int cpus, cpu;
-	bool yield;
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
 
-	/* Holding any lock stops cpus from going down. */
-	spin_lock(&call_lock);
+	return xl->lock != 0;
+}
 
-	cpu_clear(smp_processor_id(), mask);
+static int xen_spin_is_contended(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
 
-	cpus = cpus_weight(mask);
-	if (!cpus) {
-		spin_unlock(&call_lock);
+	/* Not strictly true; this is only the count of contended
+	   lock-takers entering the slow path. */
+	return xl->spinners != 0;
+}
+
+static int xen_spin_trylock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	u8 old = 1;
+
+	asm("xchgb %b0,%1"
+	    : "+q" (old), "+m" (xl->lock) : : "memory");
+
+	return old == 0;
+}
+
+static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
+static DEFINE_PER_CPU(struct xen_spinlock *, lock_spinners);
+
+static inline void spinning_lock(struct xen_spinlock *xl)
+{
+	__get_cpu_var(lock_spinners) = xl;
+	wmb();			/* set lock of interest before count */
+	asm(LOCK_PREFIX " incw %0"
+	    : "+m" (xl->spinners) : : "memory");
+}
+
+static inline void unspinning_lock(struct xen_spinlock *xl)
+{
+	asm(LOCK_PREFIX " decw %0"
+	    : "+m" (xl->spinners) : : "memory");
+	wmb();			/* decrement count before clearing lock */
+	__get_cpu_var(lock_spinners) = NULL;
+}
+
+static noinline int xen_spin_lock_slow(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	int irq = __get_cpu_var(lock_kicker_irq);
+	int ret;
+
+	/* If kicker interrupts not initialized yet, just spin */
+	if (irq == -1)
 		return 0;
+
+	/* announce we're spinning */
+	spinning_lock(xl);
+
+	/* clear pending */
+	xen_clear_irq_pending(irq);
+
+	/* check again make sure it didn't become free while
+	   we weren't looking  */
+	ret = xen_spin_trylock(lock);
+	if (ret)
+		goto out;
+
+	/* block until irq becomes pending */
+	xen_poll_irq(irq);
+	kstat_this_cpu.irqs[irq]++;
+
+out:
+	unspinning_lock(xl);
+	return ret;
+}
+
+static void xen_spin_lock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	int timeout;
+	u8 oldval;
+
+	do {
+		timeout = 1 << 10;
+
+		asm("1: xchgb %1,%0\n"
+		    "   testb %1,%1\n"
+		    "   jz 3f\n"
+		    "2: rep;nop\n"
+		    "   cmpb $0,%0\n"
+		    "   je 1b\n"
+		    "   dec %2\n"
+		    "   jnz 2b\n"
+		    "3:\n"
+		    : "+m" (xl->lock), "=q" (oldval), "+r" (timeout)
+		    : "1" (1)
+		    : "memory");
+
+	} while (unlikely(oldval != 0 && !xen_spin_lock_slow(lock)));
+}
+
+static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu) {
+		/* XXX should mix up next cpu selection */
+		if (per_cpu(lock_spinners, cpu) == xl) {
+			xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
+			break;
+		}
 	}
+}
 
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
+static void xen_spin_unlock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
 
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
+	smp_wmb();		/* make sure no writes get moved after unlock */
+	xl->lock = 0;		/* release lock */
 
-	call_data = &data;
-	mb();			/* write everything before IPI */
+	/* make sure unlock happens before kick */
+	barrier();
 
-	/* Send a message to other CPUs and wait for them to respond */
-	xen_send_IPI_mask(mask, XEN_CALL_FUNCTION_VECTOR);
+	if (unlikely(xl->spinners))
+		xen_spin_unlock_slow(xl);
+}
 
-	/* Make sure other vcpus get a chance to run if they need to. */
-	yield = false;
-	for_each_cpu_mask(cpu, mask)
-		if (xen_vcpu_stolen(cpu))
-			yield = true;
+static __cpuinit void xen_init_lock_cpu(int cpu)
+{
+	int irq;
+	const char *name;
+
+	name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
+	irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
+				     cpu,
+				     xen_reschedule_interrupt,
+				     IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				     name,
+				     NULL);
+
+	if (irq >= 0) {
+		disable_irq(irq); /* make sure it's never delivered */
+		per_cpu(lock_kicker_irq, cpu) = irq;
+	}
 
-	if (yield)
-		HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+	printk("cpu %d spinlock event irq %d\n", cpu, irq);
+}
 
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus ||
-	       (wait && atomic_read(&data.finished) != cpus))
-		cpu_relax();
+static void __init xen_init_spinlocks(void)
+{
+	pv_lock_ops.spin_is_locked = xen_spin_is_locked;
+	pv_lock_ops.spin_is_contended = xen_spin_is_contended;
+	pv_lock_ops.spin_lock = xen_spin_lock;
+	pv_lock_ops.spin_trylock = xen_spin_trylock;
+	pv_lock_ops.spin_unlock = xen_spin_unlock;
+}
 
-	spin_unlock(&call_lock);
+static const struct smp_ops xen_smp_ops __initdata = {
+	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
+	.smp_prepare_cpus = xen_smp_prepare_cpus,
+	.cpu_up = xen_cpu_up,
+	.smp_cpus_done = xen_smp_cpus_done,
 
-	return 0;
+	.smp_send_stop = xen_smp_send_stop,
+	.smp_send_reschedule = xen_smp_send_reschedule,
+
+	.send_call_func_ipi = xen_smp_send_call_function_ipi,
+	.send_call_func_single_ipi = xen_smp_send_call_function_single_ipi,
+};
+
+void __init xen_smp_init(void)
+{
+	smp_ops = xen_smp_ops;
+	xen_fill_possible_map();
+	xen_init_spinlocks();
 }
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
new file mode 100644
index 000000000000..2a234db5949b
--- /dev/null
+++ b/arch/x86/xen/suspend.c
@@ -0,0 +1,48 @@
+#include <linux/types.h>
+
+#include <xen/interface/xen.h>
+#include <xen/grant_table.h>
+#include <xen/events.h>
+
+#include <asm/xen/hypercall.h>
+#include <asm/xen/page.h>
+
+#include "xen-ops.h"
+#include "mmu.h"
+
+void xen_pre_suspend(void)
+{
+	xen_start_info->store_mfn = mfn_to_pfn(xen_start_info->store_mfn);
+	xen_start_info->console.domU.mfn =
+		mfn_to_pfn(xen_start_info->console.domU.mfn);
+
+	BUG_ON(!irqs_disabled());
+
+	HYPERVISOR_shared_info = &xen_dummy_shared_info;
+	if (HYPERVISOR_update_va_mapping(fix_to_virt(FIX_PARAVIRT_BOOTMAP),
+					 __pte_ma(0), 0))
+		BUG();
+}
+
+void xen_post_suspend(int suspend_cancelled)
+{
+	xen_setup_shared_info();
+
+	if (suspend_cancelled) {
+		xen_start_info->store_mfn =
+			pfn_to_mfn(xen_start_info->store_mfn);
+		xen_start_info->console.domU.mfn =
+			pfn_to_mfn(xen_start_info->console.domU.mfn);
+	} else {
+#ifdef CONFIG_SMP
+		xen_cpu_initialized_map = cpu_online_map;
+#endif
+		xen_vcpu_restore();
+	}
+
+}
+
+void xen_arch_resume(void)
+{
+	/* nothing */
+}
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 41e217503c96..685b77470fc3 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -197,8 +197,8 @@ unsigned long long xen_sched_clock(void)
 }
 
 
-/* Get the CPU speed from Xen */
-unsigned long xen_cpu_khz(void)
+/* Get the TSC speed from Xen */
+unsigned long xen_tsc_khz(void)
 {
 	u64 xen_khz = 1000000ULL << 32;
 	const struct pvclock_vcpu_time_info *info =
@@ -459,6 +459,19 @@ void xen_setup_cpu_clockevents(void)
 	clockevents_register_device(&__get_cpu_var(xen_clock_events));
 }
 
+void xen_timer_resume(void)
+{
+	int cpu;
+
+	if (xen_clockevent != &xen_vcpuop_clockevent)
+		return;
+
+	for_each_online_cpu(cpu) {
+		if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL))
+			BUG();
+	}
+}
+
 __init void xen_time_init(void)
 {
 	int cpu = smp_processor_id();
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm_32.S
index 2497a30f41de..2497a30f41de 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm_32.S
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
new file mode 100644
index 000000000000..7f58304fafb3
--- /dev/null
+++ b/arch/x86/xen/xen-asm_64.S
@@ -0,0 +1,271 @@
+/*
+	Asm versions of Xen pv-ops, suitable for either direct use or inlining.
+	The inline versions are the same as the direct-use versions, with the
+	pre- and post-amble chopped off.
+
+	This code is encoded for size rather than absolute efficiency,
+	with a view to being able to inline as much as possible.
+
+	We only bother with direct forms (ie, vcpu in pda) of the operations
+	here; the indirect forms are better handled in C, since they're
+	generally too large to inline anyway.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/processor-flags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+
+#include <xen/interface/xen.h>
+
+#define RELOC(x, v)	.globl x##_reloc; x##_reloc=v
+#define ENDPATCH(x)	.globl x##_end; x##_end=.
+
+/* Pseudo-flag used for virtual NMI, which we don't implement yet */
+#define XEN_EFLAGS_NMI	0x80000000
+
+#if 0
+#include <asm/percpu.h>
+
+/*
+	Enable events.  This clears the event mask and tests the pending
+	event status with one and operation.  If there are pending
+	events, then enter the hypervisor to get them handled.
+ */
+ENTRY(xen_irq_enable_direct)
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+	jz 1f
+
+2:	call check_events
+1:
+ENDPATCH(xen_irq_enable_direct)
+	ret
+	ENDPROC(xen_irq_enable_direct)
+	RELOC(xen_irq_enable_direct, 2b+1)
+
+/*
+	Disabling events is simply a matter of making the event mask
+	non-zero.
+ */
+ENTRY(xen_irq_disable_direct)
+	movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+ENDPATCH(xen_irq_disable_direct)
+	ret
+	ENDPROC(xen_irq_disable_direct)
+	RELOC(xen_irq_disable_direct, 0)
+
+/*
+	(xen_)save_fl is used to get the current interrupt enable status.
+	Callers expect the status to be in X86_EFLAGS_IF, and other bits
+	may be set in the return value.  We take advantage of this by
+	making sure that X86_EFLAGS_IF has the right value (and other bits
+	in that byte are 0), but other bits in the return value are
+	undefined.  We need to toggle the state of the bit, because
+	Xen and x86 use opposite senses (mask vs enable).
+ */
+ENTRY(xen_save_fl_direct)
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	setz %ah
+	addb %ah,%ah
+ENDPATCH(xen_save_fl_direct)
+	ret
+	ENDPROC(xen_save_fl_direct)
+	RELOC(xen_save_fl_direct, 0)
+
+/*
+	In principle the caller should be passing us a value return
+	from xen_save_fl_direct, but for robustness sake we test only
+	the X86_EFLAGS_IF flag rather than the whole byte. After
+	setting the interrupt mask state, it checks for unmasked
+	pending events and enters the hypervisor to get them delivered
+	if so.
+ */
+ENTRY(xen_restore_fl_direct)
+	testb $X86_EFLAGS_IF>>8, %ah
+	setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* check for unmasked and pending */
+	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+	jz 1f
+2:	call check_events
+1:
+ENDPATCH(xen_restore_fl_direct)
+	ret
+	ENDPROC(xen_restore_fl_direct)
+	RELOC(xen_restore_fl_direct, 2b+1)
+
+
+/*
+	Force an event check by making a hypercall,
+	but preserve regs before making the call.
+ */
+check_events:
+	push %rax
+	push %rcx
+	push %rdx
+	push %rsi
+	push %rdi
+	push %r8
+	push %r9
+	push %r10
+	push %r11
+	call force_evtchn_callback
+	pop %r11
+	pop %r10
+	pop %r9
+	pop %r8
+	pop %rdi
+	pop %rsi
+	pop %rdx
+	pop %rcx
+	pop %rax
+	ret
+#endif
+
+ENTRY(xen_adjust_exception_frame)
+	mov 8+0(%rsp),%rcx
+	mov 8+8(%rsp),%r11
+	ret $16
+
+hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
+/*
+	Xen64 iret frame:
+
+	ss
+	rsp
+	rflags
+	cs
+	rip		<-- standard iret frame
+
+	flags
+
+	rcx		}
+	r11		}<-- pushed by hypercall page
+rsp ->	rax		}
+ */
+ENTRY(xen_iret)
+	pushq $0
+1:	jmp hypercall_iret
+ENDPATCH(xen_iret)
+RELOC(xen_iret, 1b+1)
+
+/*
+	sysexit is not used for 64-bit processes, so it's
+	only ever used to return to 32-bit compat userspace.
+ */
+ENTRY(xen_sysexit)
+	pushq $__USER32_DS
+	pushq %rcx
+	pushq $X86_EFLAGS_IF
+	pushq $__USER32_CS
+	pushq %rdx
+
+	pushq $0
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysexit)
+RELOC(xen_sysexit, 1b+1)
+
+ENTRY(xen_sysret64)
+	/* We're already on the usermode stack at this point, but still
+	   with the kernel gs, so we can easily switch back */
+	movq %rsp, %gs:pda_oldrsp
+	movq %gs:pda_kernelstack,%rsp
+
+	pushq $__USER_DS
+	pushq %gs:pda_oldrsp
+	pushq %r11
+	pushq $__USER_CS
+	pushq %rcx
+
+	pushq $VGCF_in_syscall
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysret64)
+RELOC(xen_sysret64, 1b+1)
+
+ENTRY(xen_sysret32)
+	/* We're already on the usermode stack at this point, but still
+	   with the kernel gs, so we can easily switch back */
+	movq %rsp, %gs:pda_oldrsp
+	movq %gs:pda_kernelstack, %rsp
+
+	pushq $__USER32_DS
+	pushq %gs:pda_oldrsp
+	pushq %r11
+	pushq $__USER32_CS
+	pushq %rcx
+
+	pushq $VGCF_in_syscall
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysret32)
+RELOC(xen_sysret32, 1b+1)
+
+/*
+	Xen handles syscall callbacks much like ordinary exceptions,
+	which means we have:
+	 - kernel gs
+	 - kernel rsp
+	 - an iret-like stack frame on the stack (including rcx and r11):
+		ss
+		rsp
+		rflags
+		cs
+		rip
+		r11
+	rsp->	rcx
+
+	In all the entrypoints, we undo all that to make it look
+	like a CPU-generated syscall/sysenter and jump to the normal
+	entrypoint.
+ */
+
+.macro undo_xen_syscall
+	mov 0*8(%rsp),%rcx
+	mov 1*8(%rsp),%r11
+	mov 5*8(%rsp),%rsp
+.endm
+
+/* Normal 64-bit system call target */
+ENTRY(xen_syscall_target)
+	undo_xen_syscall
+	jmp system_call_after_swapgs
+ENDPROC(xen_syscall_target)
+
+#ifdef CONFIG_IA32_EMULATION
+
+/* 32-bit compat syscall target */
+ENTRY(xen_syscall32_target)
+	undo_xen_syscall
+	jmp ia32_cstar_target
+ENDPROC(xen_syscall32_target)
+
+/* 32-bit compat sysenter target */
+ENTRY(xen_sysenter_target)
+	undo_xen_syscall
+	jmp ia32_sysenter_target
+ENDPROC(xen_sysenter_target)
+
+#else /* !CONFIG_IA32_EMULATION */
+
+ENTRY(xen_syscall32_target)
+ENTRY(xen_sysenter_target)
+	lea 16(%rsp), %rsp	/* strip %rcx,%r11 */
+	mov $-ENOSYS, %rax
+	pushq $VGCF_in_syscall
+	jmp hypercall_iret
+ENDPROC(xen_syscall32_target)
+ENDPROC(xen_sysenter_target)
+
+#endif	/* CONFIG_IA32_EMULATION */
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 6ec3b4f7719b..63d49a523ed3 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -5,14 +5,24 @@
 
 #include <linux/elfnote.h>
 #include <linux/init.h>
+
 #include <asm/boot.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
 #include <xen/interface/elfnote.h>
+#include <asm/xen/interface.h>
 
 	__INIT
 ENTRY(startup_xen)
-	movl %esi,xen_start_info
 	cld
-	movl $(init_thread_union+THREAD_SIZE),%esp
+#ifdef CONFIG_X86_32
+	mov %esi,xen_start_info
+	mov $init_thread_union+THREAD_SIZE,%esp
+#else
+	mov %rsi,xen_start_info
+	mov $init_thread_union+THREAD_SIZE,%rsp
+#endif
 	jmp xen_start_kernel
 
 	__FINIT
@@ -20,17 +30,26 @@ ENTRY(startup_xen)
 .pushsection .text
 	.align PAGE_SIZE_asm
 ENTRY(hypercall_page)
-	.skip 0x1000
+	.skip PAGE_SIZE_asm
 .popsection
 
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,  .asciz "2.6")
 	ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,    .asciz "xen-3.0")
-	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      .long  __PAGE_OFFSET)
-	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          .long  startup_xen)
-	ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long  hypercall_page)
+#ifdef CONFIG_X86_32
+	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      _ASM_PTR __PAGE_OFFSET)
+#else
+	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      _ASM_PTR __START_KERNEL_map)
+#endif
+	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          _ASM_PTR startup_xen)
+	ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, _ASM_PTR hypercall_page)
 	ELFNOTE(Xen, XEN_ELFNOTE_FEATURES,       .asciz "!writable_page_tables|pae_pgdir_above_4gb")
 	ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE,       .asciz "yes")
 	ELFNOTE(Xen, XEN_ELFNOTE_LOADER,         .asciz "generic")
+	ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID,
+		.quad _PAGE_PRESENT; .quad _PAGE_PRESENT)
+	ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1)
+	ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW,   _ASM_PTR __HYPERVISOR_VIRT_START)
+	ELFNOTE(Xen, XEN_ELFNOTE_PADDR_OFFSET,   _ASM_PTR 0)
 
 #endif /*CONFIG_XEN */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index f1063ae08037..dd3c23152a2e 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -9,22 +9,31 @@
 extern const char xen_hypervisor_callback[];
 extern const char xen_failsafe_callback[];
 
+struct trap_info;
 void xen_copy_trap_info(struct trap_info *traps);
 
 DECLARE_PER_CPU(unsigned long, xen_cr3);
 DECLARE_PER_CPU(unsigned long, xen_current_cr3);
 
 extern struct start_info *xen_start_info;
+extern struct shared_info xen_dummy_shared_info;
 extern struct shared_info *HYPERVISOR_shared_info;
 
+void xen_setup_mfn_list_list(void);
+void xen_setup_shared_info(void);
+
 char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);
 void __init xen_init_IRQ(void);
 void xen_enable_sysenter(void);
+void xen_enable_syscall(void);
+void xen_vcpu_restore(void);
+
+void __init xen_build_dynamic_phys_to_machine(void);
 
 void xen_setup_timer(int cpu);
 void xen_setup_cpu_clockevents(void);
-unsigned long xen_cpu_khz(void);
+unsigned long xen_tsc_khz(void);
 void __init xen_time_init(void);
 unsigned long xen_get_wallclock(void);
 int xen_set_wallclock(unsigned long time);
@@ -36,23 +45,15 @@ bool xen_vcpu_stolen(int vcpu);
 
 void xen_mark_init_mm_pinned(void);
 
-void __init xen_fill_possible_map(void);
-
 void __init xen_setup_vcpu_info_placement(void);
-void xen_smp_prepare_boot_cpu(void);
-void xen_smp_prepare_cpus(unsigned int max_cpus);
-int xen_cpu_up(unsigned int cpu);
-void xen_smp_cpus_done(unsigned int max_cpus);
 
-void xen_smp_send_stop(void);
-void xen_smp_send_reschedule(int cpu);
-int xen_smp_call_function (void (*func) (void *info), void *info, int nonatomic,
-			   int wait);
-int xen_smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-				 int nonatomic, int wait);
+#ifdef CONFIG_SMP
+void xen_smp_init(void);
 
-int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *),
-			       void *info, int wait);
+extern cpumask_t xen_cpu_initialized_map;
+#else
+static inline void xen_smp_init(void) {}
+#endif
 
 
 /* Declare an asm function, along with symbols needed to make it
@@ -67,7 +68,11 @@ DECL_ASM(void, xen_irq_disable_direct, void);
 DECL_ASM(unsigned long, xen_save_fl_direct, void);
 DECL_ASM(void, xen_restore_fl_direct, unsigned long);
 
+/* These are not functions, and cannot be called normally */
 void xen_iret(void);
 void xen_sysexit(void);
+void xen_sysret32(void);
+void xen_sysret64(void);
+void xen_adjust_exception_frame(void);
 
 #endif /* XEN_OPS_H */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 9fc8551a1cf6..02e417d3d8e9 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -194,8 +194,8 @@ config HOTPLUG
 	plugged into slots found on all modern laptop computers.  Another
 	example, used on modern desktops as well as laptops, is USB.
 
-	Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-	software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+	Enable HOTPLUG and build a modular kernel.  Get agent software
+	(from <http://linux-hotplug.sourceforge.net/>) and install it.
 	Then your kernel will automatically call out to a user mode "policy
 	agent" (/sbin/hotplug) to load modules and set up software needed
 	to use devices as you hotplug them.
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 5e6d75c9f92b..a00359e8f7a8 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -16,6 +16,7 @@
 
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/screen_info.h>
 #include <linux/bootmem.h>
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index f3e16efcd47a..ac15ecbdf919 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -49,7 +49,7 @@ asmlinkage long xtensa_pipe(int __user *userfds)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (!error) {
 		if (copy_to_user(userfds, fd, 2 * sizeof(int)))
 			error = -EFAULT;
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 81d0560eaea2..34163cfaaffc 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -280,36 +280,9 @@ void free_initmem(void)
 	       (&__init_end - &__init_begin) >> 10);
 }
 
-void show_mem(void)
-{
-	int i, free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n",cached);
-	printk("%d free pages\n", free);
-}
-
 struct kmem_cache *pgtable_cache __read_mostly;
 
-static void pgd_ctor(struct kmem_cache *cache, void* addr)
+static void pgd_ctor(void* addr)
 {
 	pte_t* ptep = (pte_t*)addr;
 	int i;